1709 files changed, 0 insertions, 477715 deletions

diff --git a/include/kernel-5.4 b/include/kernel-5.4
deleted file mode 100644
index c9833ef60e..0000000000
--- a/include/kernel-5.4
+++ /dev/null
@@ -1,2 +0,0 @@
-LINUX_VERSION-5.4 = .175
-LINUX_KERNEL_HASH-5.4.175 = ac901bdffb1488d6c730ca7ab42322163dd331b240e2f06ad83d199e251a4840
diff --git a/target/linux/archs38/config-5.4 b/target/linux/archs38/config-5.4
deleted file mode 100644
index 9847daa769..0000000000
--- a/target/linux/archs38/config-5.4
+++ /dev/null
@@ -1,277 +0,0 @@
-# CONFIG_16KSTACKS is not set
-CONFIG_ARC=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y
-CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARC_BUILTIN_DTB_NAME=""
-CONFIG_ARC_CACHE=y
-CONFIG_ARC_CACHE_LINE_SHIFT=6
-CONFIG_ARC_CACHE_PAGES=y
-CONFIG_ARC_CPU_HS=y
-CONFIG_ARC_CURR_IN_REG=y
-CONFIG_ARC_DBG=y
-# CONFIG_ARC_DBG_TLB_PARANOIA is not set
-CONFIG_ARC_DW2_UNWIND=y
-CONFIG_ARC_HAS_ACCL_REGS=y
-CONFIG_ARC_HAS_DCACHE=y
-# CONFIG_ARC_HAS_DCCM is not set
-CONFIG_ARC_HAS_DIV_REM=y
-CONFIG_ARC_HAS_ICACHE=y
-# CONFIG_ARC_HAS_ICCM is not set
-CONFIG_ARC_HAS_LL64=y
-CONFIG_ARC_HAS_LLSC=y
-# CONFIG_ARC_HAS_PAE40 is not set
-CONFIG_ARC_HAS_SWAPE=y
-CONFIG_ARC_IRQ_NO_AUTOSAVE=y
-CONFIG_ARC_KVADDR_SIZE=256
-CONFIG_ARC_MCIP=y
-# CONFIG_ARC_METAWARE_HLINK is not set
-CONFIG_ARC_MMU_V4=y
-# CONFIG_ARC_PAGE_SIZE_16K is not set
-# CONFIG_ARC_PAGE_SIZE_4K is not set
-CONFIG_ARC_PAGE_SIZE_8K=y
-CONFIG_ARC_PLAT_AXS10X=y
-# CONFIG_ARC_PLAT_EZNPS is not set
-# CONFIG_ARC_PLAT_TB10X is not set
-# CONFIG_ARC_SMP_HALT_ON_RESET is not set
-CONFIG_ARC_SOC_HSDK=y
-CONFIG_ARC_TIMERS=y
-CONFIG_ARC_TIMERS_64BIT=y
-CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS=y
-CONFIG_AXS103=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED=y
-CONFIG_CC_HAS_KASAN_GENERIC=y
-# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLK_HSDK=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_DEVTMPFS=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-CONFIG_DWMAC_ANARION=y
-CONFIG_DWMAC_GENERIC=y
-CONFIG_DW_APB_ICTL=y
-CONFIG_DW_AXI_DMAC=y
-CONFIG_EXT4_FS=y
-# CONFIG_EZNPS_GIC is not set
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DWAPB=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_SNPS_CREG=y
-CONFIG_GRACE_PERIOD=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FUTEX_CMPXCHG=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PCI=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_IIO=y
-CONFIG_IIO_BUFFER=y
-CONFIG_IIO_KFIFO_BUF=y
-CONFIG_IIO_ST_PRESS=y
-CONFIG_IIO_ST_PRESS_I2C=y
-CONFIG_IIO_ST_PRESS_SPI=y
-CONFIG_IIO_ST_SENSORS_CORE=y
-CONFIG_IIO_ST_SENSORS_I2C=y
-CONFIG_IIO_ST_SENSORS_SPI=y
-CONFIG_IIO_TRIGGER=y
-CONFIG_IIO_TRIGGERED_BUFFER=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISA_ARCOMPACT is not set
-CONFIG_ISA_ARCV2=y
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KERNEL_GZIP=y
-CONFIG_LIBFDT=y
-CONFIG_LINUX_LINK_BASE=0x90000000
-CONFIG_LINUX_RAM_BASE=0x80000000
-CONFIG_LOCKD=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MICREL_PHY=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_DW=y
-# CONFIG_MMC_DW_BLUEFIELD is not set
-# CONFIG_MMC_DW_EXYNOS is not set
-# CONFIG_MMC_DW_HI3798CV200 is not set
-# CONFIG_MMC_DW_K3 is not set
-CONFIG_MMC_DW_PLTFM=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NAMESPACES=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_NS=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NO_IOPORT_MAP=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PADATA=y
-CONFIG_PAGE_POOL=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PPS=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPTION=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_RESET_AXS10X=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_HSDK=y
-CONFIG_RESET_SIMPLE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCSI=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_ARC=y
-CONFIG_SERIAL_ARC_CONSOLE=y
-CONFIG_SERIAL_ARC_NR_PORTS=1
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SOFTLOCKUP_DETECTOR=y
-CONFIG_SPI=y
-CONFIG_SPI_DESIGNWARE=y
-CONFIG_SPI_DW_MMIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-CONFIG_STACKTRACE=y
-# CONFIG_STANDALONE is not set
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-# CONFIG_STMMAC_SELFTESTS is not set
-CONFIG_SUNRPC=y
-CONFIG_SWPHY=y
-CONFIG_TASKS_RCU=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TI_ADC108S102=y
-CONFIG_TREE_SRCU=y
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USER_NS is not set
-CONFIG_VFAT_FS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
diff --git a/target/linux/archs38/patches-5.4/0001-arch-arc-Add-compiler-option-for-gcc8.4.patch b/target/linux/archs38/patches-5.4/0001-arch-arc-Add-compiler-option-for-gcc8.4.patch
deleted file mode 100644
index 4489a5169c..0000000000
--- a/target/linux/archs38/patches-5.4/0001-arch-arc-Add-compiler-option-for-gcc8.4.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 2e2b3aeda9af9c029bf347c974911fe96cd79c43 Mon Sep 17 00:00:00 2001
-From: Evgeniy Didin <didin@synopsys.com>
-Date: Mon, 23 Mar 2020 15:57:18 +0300
-Subject: [PATCH] arch/arc: Add compiler option for gcc8.4
-
-Signed-off-by: Evgeniy Didin <didin@synopsys.com>
----
- arch/arc/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arc/Makefile
-+++ b/arch/arc/Makefile
-@@ -11,7 +11,7 @@ endif
- 
- cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
- cflags-$(CONFIG_ISA_ARCOMPACT)	+= -mA7
--cflags-$(CONFIG_ISA_ARCV2)	+= -mcpu=hs38
-+cflags-$(CONFIG_ISA_ARCV2)	+= -mcpu=hs38 -mmpy-option=2
- 
- ifdef CONFIG_ARC_CURR_IN_REG
- # For a global register defintion, make sure it gets passed to every file
diff --git a/target/linux/bcm47xx/config-5.4 b/target/linux/bcm47xx/config-5.4
deleted file mode 100644
index 2747efc04d..0000000000
--- a/target/linux/bcm47xx/config-5.4
+++ /dev/null
@@ -1,208 +0,0 @@
-CONFIG_ADM6996_PHY=y
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BCM47XX=y
-CONFIG_BCM47XX_BCMA=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_BCM47XX_SSB=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_DRIVER_MIPS=y
-CONFIG_BCMA_DRIVER_PCI=y
-CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_NFLASH=y
-CONFIG_BCMA_PFLASH=y
-CONFIG_BCMA_SFLASH=y
-# CONFIG_BGMAC_BCMA is not set
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BMIPS is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_DIRECT_OPS=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y
-CONFIG_DMA_NONCOHERENT_MMAP=y
-CONFIG_DMA_NONCOHERENT_OPS=y
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_WDT=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_COMPILER_H=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO_REGISTER=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BCM47XXNFLASH=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_PARSER_TRX=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_OF is not set
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_DRIVER_EXTIF=y
-CONFIG_SSB_DRIVER_GIGE=y
-CONFIG_SSB_DRIVER_GPIO=y
-CONFIG_SSB_DRIVER_MIPS=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_EMBEDDED=y
-CONFIG_SSB_HOST_SOC=y
-CONFIG_SSB_PCICORE_HOSTMODE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SERIAL=y
-CONFIG_SSB_SFLASH=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_BMIPS=y
-CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
-CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/bcm47xx/patches-5.4/159-cpu_fixes.patch b/target/linux/bcm47xx/patches-5.4/159-cpu_fixes.patch
deleted file mode 100644
index 59d7834de3..0000000000
--- a/target/linux/bcm47xx/patches-5.4/159-cpu_fixes.patch
+++ /dev/null
@@ -1,492 +0,0 @@
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -26,6 +26,38 @@
- extern void (*r4k_blast_dcache)(void);
- extern void (*r4k_blast_icache)(void);
- 
-+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
-+#include <asm/paccess.h>
-+#include <linux/ssb/ssb.h>
-+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
-+
-+static inline unsigned long bcm4710_dummy_rreg(void)
-+{
-+      return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
-+}
-+
-+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
-+
-+static inline unsigned long bcm4710_fill_tlb(void *addr)
-+{
-+      return *(unsigned long *)addr;
-+}
-+
-+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
-+
-+static inline void bcm4710_protected_fill_tlb(void *addr)
-+{
-+      unsigned long x;
-+      get_dbe(x, (unsigned long *)addr);;
-+}
-+
-+#else
-+#define BCM4710_DUMMY_RREG()
-+
-+#define BCM4710_FILL_TLB(addr)
-+#define BCM4710_PROTECTED_FILL_TLB(addr)
-+#endif
-+
- /*
-  * This macro return a properly sign-extended address suitable as base address
-  * for indexed cache operations.  Two issues here:
-@@ -56,6 +88,7 @@ static inline void flush_icache_line_ind
- 
- static inline void flush_dcache_line_indexed(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Index_Writeback_Inv_D, addr);
- }
- 
-@@ -79,11 +112,13 @@ static inline void flush_icache_line(uns
- 
- static inline void flush_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Writeback_Inv_D, addr);
- }
- 
- static inline void invalidate_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Invalidate_D, addr);
- }
- 
-@@ -156,6 +191,7 @@ static inline int protected_flush_icache
- #ifdef CONFIG_EVA
- 		return protected_cachee_op(Hit_Invalidate_I, addr);
- #else
-+		BCM4710_DUMMY_RREG();
- 		return protected_cache_op(Hit_Invalidate_I, addr);
- #endif
- 	}
-@@ -169,6 +205,7 @@ static inline int protected_flush_icache
-  */
- static inline int protected_writeback_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- #ifdef CONFIG_EVA
- 	return protected_cachee_op(Hit_Writeback_Inv_D, addr);
- #else
-@@ -526,8 +563,51 @@ static inline void invalidate_tcache_pag
- 		: "r" (base),						\
- 		  "i" (op));
- 
-+static inline void blast_dcache(void)
-+{
-+	unsigned long start = KSEG0;
-+	unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
-+	unsigned long end = (start + dcache_size);
-+
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Index_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+
-+	BCM4710_FILL_TLB(start);
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Hit_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page_indexed(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+	unsigned long ws_end = current_cpu_data.dcache.ways <<
-+	                       current_cpu_data.dcache.waybit;
-+	unsigned long ws, addr;
-+	for (ws = 0; ws < ws_end; ws += ws_inc) {
-+		start = page + ws;
-+		for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
-+			BCM4710_DUMMY_RREG();
-+			cache_op(Index_Writeback_Inv_D, addr);
-+		}
-+	}
-+}
-+
- /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
--#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra)	\
-+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra, war) \
- static inline void extra##blast_##pfx##cache##lsize(void)		\
- {									\
- 	unsigned long start = INDEX_BASE;				\
-@@ -537,6 +617,7 @@ static inline void extra##blast_##pfx##c
- 			       current_cpu_data.desc.waybit;		\
- 	unsigned long ws, addr;						\
- 									\
-+	war								\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
- 		for (addr = start; addr < end; addr += lsize * 32)	\
- 			cache##lsize##_unroll32(addr|ws, indexop);	\
-@@ -547,6 +628,7 @@ static inline void extra##blast_##pfx##c
- 	unsigned long start = page;					\
- 	unsigned long end = page + PAGE_SIZE;				\
- 									\
-+	war								\
- 	do {								\
- 		cache##lsize##_unroll32(start, hitop);			\
- 		start += lsize * 32;					\
-@@ -563,31 +645,32 @@ static inline void extra##blast_##pfx##c
- 			       current_cpu_data.desc.waybit;		\
- 	unsigned long ws, addr;						\
- 									\
-+	war								\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
- 		for (addr = start; addr < end; addr += lsize * 32)	\
- 			cache##lsize##_unroll32(addr|ws, indexop);	\
- }
- 
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, )
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, )
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, )
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
--
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, , )
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, , )
-+
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, , )
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, , )
- 
- #define __BUILD_BLAST_USER_CACHE(pfx, desc, indexop, hitop, lsize) \
- static inline void blast_##pfx##cache##lsize##_user_page(unsigned long page) \
-@@ -612,58 +695,29 @@ __BUILD_BLAST_USER_CACHE(d, dcache, Inde
- __BUILD_BLAST_USER_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
- 
- /* build blast_xxx_range, protected_blast_xxx_range */
--#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra)	\
-+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra, war, war2)	\
- static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \
- 						    unsigned long end)	\
- {									\
- 	unsigned long lsize = cpu_##desc##_line_size();			\
--	unsigned long lsize_2 = lsize * 2;				\
--	unsigned long lsize_3 = lsize * 3;				\
--	unsigned long lsize_4 = lsize * 4;				\
--	unsigned long lsize_5 = lsize * 5;				\
--	unsigned long lsize_6 = lsize * 6;				\
--	unsigned long lsize_7 = lsize * 7;				\
--	unsigned long lsize_8 = lsize * 8;				\
- 	unsigned long addr = start & ~(lsize - 1);			\
--	unsigned long aend = (end + lsize - 1) & ~(lsize - 1);		\
--	int lines = (aend - addr) / lsize;				\
--									\
--	while (lines >= 8) {						\
--		prot##cache_op(hitop, addr);				\
--		prot##cache_op(hitop, addr + lsize);			\
--		prot##cache_op(hitop, addr + lsize_2);			\
--		prot##cache_op(hitop, addr + lsize_3);			\
--		prot##cache_op(hitop, addr + lsize_4);			\
--		prot##cache_op(hitop, addr + lsize_5);			\
--		prot##cache_op(hitop, addr + lsize_6);			\
--		prot##cache_op(hitop, addr + lsize_7);			\
--		addr += lsize_8;					\
--		lines -= 8;						\
--	}								\
--									\
--	if (lines & 0x4) {						\
--		prot##cache_op(hitop, addr);				\
--		prot##cache_op(hitop, addr + lsize);			\
--		prot##cache_op(hitop, addr + lsize_2);			\
--		prot##cache_op(hitop, addr + lsize_3);			\
--		addr += lsize_4;					\
--	}								\
-+	unsigned long aend = (end - 1) & ~(lsize - 1);			\
- 									\
--	if (lines & 0x2) {						\
--		prot##cache_op(hitop, addr);				\
--		prot##cache_op(hitop, addr + lsize);			\
--		addr += lsize_2;					\
--	}								\
-+	war								\
- 									\
--	if (lines & 0x1) {						\
-+	while (1) {							\
-+		war2							\
- 		prot##cache_op(hitop, addr);				\
-+		if (addr == aend)					\
-+			break;						\
-+		addr += lsize;						\
- 	}								\
- }
- 
- #ifndef CONFIG_EVA
- 
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, )
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, , BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, , , )
- 
- #else
- 
-@@ -697,15 +751,15 @@ __BUILD_PROT_BLAST_CACHE_RANGE(d, dcache
- __BUILD_PROT_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I)
- 
- #endif
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, , , )
- __BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson2, \
--	protected_, loongson2_)
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , )
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , )
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , )
-+	protected_, loongson2_, , )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , , BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , , , )
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , , , )
- /* blast_inv_dcache_range */
--__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , )
--__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , )
-+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , , , BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , , , )
- 
- /* Currently, this is very specific to Loongson-3 */
- #define __BUILD_BLAST_CACHE_NODE(pfx, desc, indexop, hitop, lsize)	\
---- a/arch/mips/include/asm/stackframe.h
-+++ b/arch/mips/include/asm/stackframe.h
-@@ -429,6 +429,10 @@
- #else
- 		.set	push
- 		.set	arch=r4000
-+#ifdef CONFIG_BCM47XX
-+		nop
-+		nop
-+#endif
- 		eret
- 		.set	pop
- #endif
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -21,6 +21,19 @@
- #include <asm/war.h>
- #include <asm/thread_info.h>
- 
-+#ifdef CONFIG_BCM47XX
-+# ifdef eret
-+#  undef eret
-+# endif
-+# define eret 					\
-+	.set push;				\
-+	.set noreorder;				\
-+	 nop; 					\
-+	 nop;					\
-+	 eret;					\
-+	.set pop;
-+#endif
-+
- 	__INIT
- 
- /*
-@@ -32,6 +45,9 @@
- NESTED(except_vec3_generic, 0, sp)
- 	.set	push
- 	.set	noat
-+#ifdef CONFIG_BCM47XX
-+	nop
-+#endif
- 	mfc0	k1, CP0_CAUSE
- 	andi	k1, k1, 0x7c
- #ifdef CONFIG_64BIT
-@@ -52,6 +68,9 @@ NESTED(except_vec3_r4000, 0, sp)
- 	.set	push
- 	.set	arch=r4000
- 	.set	noat
-+#ifdef CONFIG_BCM47XX
-+	nop
-+#endif
- 	mfc0	k1, CP0_CAUSE
- 	li	k0, 31<<2
- 	andi	k1, k1, 0x7c
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -39,6 +39,9 @@
- #include <asm/dma-coherence.h>
- #include <asm/mips-cps.h>
- 
-+/* For enabling BCM4710 cache workarounds */
-+static int bcm4710 = 0;
-+
- /*
-  * Bits describing what cache ops an SMP callback function may perform.
-  *
-@@ -190,6 +193,9 @@ static void r4k_blast_dcache_user_page_s
- {
- 	unsigned long  dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache_page = blast_dcache_page;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache_user_page = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -208,6 +214,9 @@ static void r4k_blast_dcache_page_indexe
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache_page_indexed = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -227,6 +236,9 @@ static void r4k_blast_dcache_setup(void)
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache = blast_dcache;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -1779,6 +1791,17 @@ static void coherency_setup(void)
- 	 * silly idea of putting something else there ...
- 	 */
- 	switch (current_cpu_type()) {
-+	case CPU_BMIPS3300:
-+		{
-+			u32 cm;
-+			cm = read_c0_diag();
-+			/* Enable icache */
-+			cm |= (1 << 31);
-+			/* Enable dcache */
-+			cm |= (1 << 30);
-+			write_c0_diag(cm);
-+		}
-+		break;
- 	case CPU_R4000PC:
- 	case CPU_R4000SC:
- 	case CPU_R4000MC:
-@@ -1825,6 +1848,15 @@ void r4k_cache_init(void)
- 	extern void build_copy_page(void);
- 	struct cpuinfo_mips *c = &current_cpu_data;
- 
-+	/* Check if special workarounds are required */
-+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
-+	if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
-+		printk("Enabling BCM4710A0 cache workarounds.\n");
-+		bcm4710 = 1;
-+	} else
-+#endif
-+		bcm4710 = 0;
-+
- 	probe_pcache();
- 	probe_vcache();
- 	setup_scache();
-@@ -1901,7 +1933,15 @@ void r4k_cache_init(void)
- 	 */
- 	local_r4k___flush_cache_all(NULL);
- 
-+#ifdef CONFIG_BCM47XX
-+	{
-+		static void (*_coherency_setup)(void);
-+		_coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
-+		_coherency_setup();
-+	}
-+#else
- 	coherency_setup();
-+#endif
- 	board_cache_error_setup = r4k_cache_error_setup;
- 
- 	/*
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -980,6 +980,9 @@ void build_get_pgde32(u32 **p, unsigned
- 		uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
- 		uasm_i_addu(p, ptr, tmp, ptr);
- #else
-+#ifdef CONFIG_BCM47XX
-+		uasm_i_nop(p);
-+#endif
- 		UASM_i_LA_mostly(p, ptr, pgdc);
- #endif
- 		uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
-@@ -1341,6 +1344,9 @@ static void build_r4000_tlb_refill_handl
- #ifdef CONFIG_64BIT
- 		build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-+# ifdef CONFIG_BCM47XX
-+		uasm_i_nop(&p);
-+# endif
- 		build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
- #endif
- 
-@@ -1352,6 +1358,9 @@ static void build_r4000_tlb_refill_handl
- 		build_update_entries(&p, K0, K1);
- 		build_tlb_write_entry(&p, &l, &r, tlb_random);
- 		uasm_l_leave(&l, p);
-+#ifdef CONFIG_BCM47XX
-+		uasm_i_nop(&p);
-+#endif
- 		uasm_i_eret(&p); /* return from trap */
- 	}
- #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
-@@ -2052,6 +2061,9 @@ build_r4000_tlbchange_handler_head(u32 *
- #ifdef CONFIG_64BIT
- 	build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
- #else
-+# ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+# endif
- 	build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
- #endif
- 
-@@ -2098,6 +2110,9 @@ build_r4000_tlbchange_handler_tail(u32 *
- 	build_tlb_write_entry(p, l, r, tlb_indexed);
- 	uasm_l_leave(l, *p);
- 	build_restore_work_registers(p);
-+#ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+#endif
- 	uasm_i_eret(p); /* return from trap */
- 
- #ifdef CONFIG_64BIT
diff --git a/target/linux/bcm47xx/patches-5.4/160-kmap_coherent.patch b/target/linux/bcm47xx/patches-5.4/160-kmap_coherent.patch
deleted file mode 100644
index 55e99dbddd..0000000000
--- a/target/linux/bcm47xx/patches-5.4/160-kmap_coherent.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From: Jeff Hansen <jhansen@cardaccess-inc.com>
-Subject: [PATCH] kmap_coherent
-
-On ASUS WL-500gP there are some "Data bus error"s when executing simple
-commands liks "ps" or "cat /proc/1/cmdline".
-
-This fixes OpenWrt ticket #1485: https://dev.openwrt.org/ticket/1485
----
---- a/arch/mips/include/asm/cpu-features.h
-+++ b/arch/mips/include/asm/cpu-features.h
-@@ -243,6 +243,9 @@
- #ifndef cpu_has_pindexed_dcache
- #define cpu_has_pindexed_dcache	(cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
- #endif
-+#ifndef cpu_use_kmap_coherent
-+#define cpu_use_kmap_coherent 1
-+#endif
- 
- /*
-  * I-Cache snoops remote store.	 This only matters on SMP.  Some multiprocessors
---- a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-@@ -80,4 +80,6 @@
- #define cpu_scache_line_size()		0
- #define cpu_has_vz			0
- 
-+#define cpu_use_kmap_coherent		0
-+
- #endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -697,7 +697,7 @@ static inline void local_r4k_flush_cache
- 		map_coherent = (cpu_has_dc_aliases &&
- 				page_mapcount(page) &&
- 				!Page_dcache_dirty(page));
--		if (map_coherent)
-+		if (map_coherent && cpu_use_kmap_coherent)
- 			vaddr = kmap_coherent(page, addr);
- 		else
- 			vaddr = kmap_atomic(page);
-@@ -719,7 +719,7 @@ static inline void local_r4k_flush_cache
- 	}
- 
- 	if (vaddr) {
--		if (map_coherent)
-+		if (map_coherent && cpu_use_kmap_coherent)
- 			kunmap_coherent();
- 		else
- 			kunmap_atomic(vaddr);
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -174,7 +174,7 @@ void copy_user_highpage(struct page *to,
- 	void *vfrom, *vto;
- 
- 	vto = kmap_atomic(to);
--	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapcount(from) && !Page_dcache_dirty(from)) {
- 		vfrom = kmap_coherent(from, vaddr);
- 		copy_page(vto, vfrom);
-@@ -196,7 +196,7 @@ void copy_to_user_page(struct vm_area_st
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
- {
--	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapcount(page) && !Page_dcache_dirty(page)) {
- 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- 		memcpy(vto, src, len);
-@@ -214,7 +214,7 @@ void copy_from_user_page(struct vm_area_
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
- {
--	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapcount(page) && !Page_dcache_dirty(page)) {
- 		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- 		memcpy(dst, vfrom, len);
diff --git a/target/linux/bcm47xx/patches-5.4/209-b44-register-adm-switch.patch b/target/linux/bcm47xx/patches-5.4/209-b44-register-adm-switch.patch
deleted file mode 100644
index 2b47501454..0000000000
--- a/target/linux/bcm47xx/patches-5.4/209-b44-register-adm-switch.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 9 Nov 2013 17:03:59 +0100
-Subject: [PATCH 210/210] b44: register adm switch
-
----
- drivers/net/ethernet/broadcom/b44.c |   57 +++++++++++++++++++++++++++++++++++
- drivers/net/ethernet/broadcom/b44.h |    3 ++
- 2 files changed, 60 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -31,6 +31,8 @@
- #include <linux/ssb/ssb.h>
- #include <linux/slab.h>
- #include <linux/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/platform_data/adm6996-gpio.h>
- 
- #include <linux/uaccess.h>
- #include <asm/io.h>
-@@ -2249,6 +2251,69 @@ static void b44_adjust_link(struct net_d
- 	}
- }
- 
-+#ifdef CONFIG_BCM47XX
-+static int b44_register_adm_switch(struct b44 *bp)
-+{
-+	int gpio;
-+	struct platform_device *pdev;
-+	struct adm6996_gpio_platform_data adm_data = {0};
-+	struct platform_device_info info = {0};
-+
-+	adm_data.model = ADM6996L;
-+	gpio = bcm47xx_nvram_gpio_pin("adm_eecs");
-+	if (gpio >= 0)
-+		adm_data.eecs = gpio;
-+	else
-+		adm_data.eecs = 2;
-+
-+	gpio = bcm47xx_nvram_gpio_pin("adm_eesk");
-+	if (gpio >= 0)
-+		adm_data.eesk = gpio;
-+	else
-+		adm_data.eesk = 3;
-+
-+	gpio = bcm47xx_nvram_gpio_pin("adm_eedi");
-+	if (gpio >= 0)
-+		adm_data.eedi = gpio;
-+	else
-+		adm_data.eedi = 4;
-+
-+	/*
-+	 * We ignore the "adm_rc" GPIO here. The driver does not use it,
-+	 * and it conflicts with the Reset button GPIO on the Linksys WRT54GSv1.
-+	 */
-+
-+	info.parent = bp->sdev->dev;
-+	info.name = "adm6996_gpio";
-+	info.id = -1;
-+	info.data = &adm_data;
-+	info.size_data = sizeof(adm_data);
-+
-+	if (!bp->adm_switch) {
-+		pdev = platform_device_register_full(&info);
-+		if (IS_ERR(pdev))
-+			return PTR_ERR(pdev);
-+
-+		bp->adm_switch = pdev;
-+	}
-+	return 0;
-+}
-+static void b44_unregister_adm_switch(struct b44 *bp)
-+{
-+	if (bp->adm_switch)
-+		platform_device_unregister(bp->adm_switch);
-+}
-+#else
-+static int b44_register_adm_switch(struct b44 *bp)
-+{
-+	return 0;
-+}
-+static void b44_unregister_adm_switch(struct b44 *bp)
-+{
-+
-+}
-+#endif /* CONFIG_BCM47XX */
-+
- static int b44_register_phy_one(struct b44 *bp)
- {
- 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-@@ -2285,6 +2350,9 @@ static int b44_register_phy_one(struct b
- 	if (!mdiobus_is_registered_device(bp->mii_bus, bp->phy_addr) &&
- 	    (sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
- 
-+		if (sprom->boardflags_lo & B44_BOARDFLAG_ADM)
-+			b44_register_adm_switch(bp);
-+
- 		dev_info(sdev->dev,
- 			 "could not find PHY at %i, use fixed one\n",
- 			 bp->phy_addr);
-@@ -2481,6 +2549,7 @@ static void b44_remove_one(struct ssb_de
- 	unregister_netdev(dev);
- 	if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- 		b44_unregister_phy_one(bp);
-+	b44_unregister_adm_switch(bp);
- 	ssb_device_disable(sdev, 0);
- 	ssb_bus_may_powerdown(sdev->bus);
- 	netif_napi_del(&bp->napi);
---- a/drivers/net/ethernet/broadcom/b44.h
-+++ b/drivers/net/ethernet/broadcom/b44.h
-@@ -408,6 +408,9 @@ struct b44 {
- 	struct mii_bus		*mii_bus;
- 	int			old_link;
- 	struct mii_if_info	mii_if;
-+
-+	/* platform device for associated switch */
-+	struct platform_device *adm_switch;
- };
- 
- #endif /* _B44_H */
diff --git a/target/linux/bcm47xx/patches-5.4/210-b44_phy_fix.patch b/target/linux/bcm47xx/patches-5.4/210-b44_phy_fix.patch
deleted file mode 100644
index 8c7a73ac0f..0000000000
--- a/target/linux/bcm47xx/patches-5.4/210-b44_phy_fix.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -431,10 +431,34 @@ static void b44_wap54g10_workaround(stru
- error:
- 	pr_warn("PHY: cannot reset MII transceiver isolate bit\n");
- }
-+
-+static void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+	char buf[20];
-+	struct ssb_device *sdev = bp->sdev;
-+
-+	/* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
-+	if (sdev->bus->sprom.board_num == 100) {
-+		bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-+	} else {
-+		/* WL-HDD */
-+		if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
-+		    !strncmp(buf, "WL300-", strlen("WL300-"))) {
-+			if (sdev->bus->sprom.et0phyaddr == 0 &&
-+			    sdev->bus->sprom.et1phyaddr == 1)
-+				bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-+		}
-+	}
-+	return;
-+}
- #else
- static inline void b44_wap54g10_workaround(struct b44 *bp)
- {
- }
-+
-+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+}
- #endif
- 
- static int b44_setup_phy(struct b44 *bp)
-@@ -443,6 +467,7 @@ static int b44_setup_phy(struct b44 *bp)
- 	int err;
- 
- 	b44_wap54g10_workaround(bp);
-+	b44_bcm47xx_workarounds(bp);
- 
- 	if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- 		return 0;
-@@ -2179,6 +2204,8 @@ static int b44_get_invariants(struct b44
- 	 * valid PHY address. */
- 	bp->phy_addr &= 0x1F;
- 
-+	b44_bcm47xx_workarounds(bp);
-+
- 	memcpy(bp->dev->dev_addr, addr, ETH_ALEN);
- 
- 	if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
diff --git a/target/linux/bcm47xx/patches-5.4/280-activate_ssb_support_in_usb.patch b/target/linux/bcm47xx/patches-5.4/280-activate_ssb_support_in_usb.patch
deleted file mode 100644
index de8bb4297d..0000000000
--- a/target/linux/bcm47xx/patches-5.4/280-activate_ssb_support_in_usb.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-This prevents the options from being delete with make kernel_oldconfig.
----
- drivers/ssb/Kconfig |    2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -32,6 +32,7 @@ config BCMA_HOST_PCI
- config BCMA_HOST_SOC
- 	bool "Support for BCMA in a SoC"
- 	depends on HAS_IOMEM
-+	select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
- 	help
- 	  Host interface for a Broadcom AIX bus directly mapped into
- 	  the memory. This only works with the Broadcom SoCs from the
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -136,6 +136,7 @@ config SSB_SFLASH
- config SSB_EMBEDDED
- 	bool
- 	depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
-+	select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
- 	default y
- 
- config SSB_DRIVER_EXTIF
diff --git a/target/linux/bcm47xx/patches-5.4/300-fork_cacheflush.patch b/target/linux/bcm47xx/patches-5.4/300-fork_cacheflush.patch
deleted file mode 100644
index daa2c1adf0..0000000000
--- a/target/linux/bcm47xx/patches-5.4/300-fork_cacheflush.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Wolfram Joost <dbox2@frokaschwei.de>
-Subject: [PATCH] fork_cacheflush
-
-On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
-seem to be caused by a kernel. They can be avoided by:
-1) Disabling highpage
-2) Using flush_cache_mm in flush_cache_dup_mm
-
-For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
----
---- a/arch/mips/include/asm/cacheflush.h
-+++ b/arch/mips/include/asm/cacheflush.h
-@@ -46,7 +46,7 @@
- extern void (*flush_cache_all)(void);
- extern void (*__flush_cache_all)(void);
- extern void (*flush_cache_mm)(struct mm_struct *mm);
--#define flush_cache_dup_mm(mm)	do { (void) (mm); } while (0)
-+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
- extern void (*flush_cache_range)(struct vm_area_struct *vma,
- 	unsigned long start, unsigned long end);
- extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
diff --git a/target/linux/bcm47xx/patches-5.4/310-no_highpage.patch b/target/linux/bcm47xx/patches-5.4/310-no_highpage.patch
deleted file mode 100644
index 4eea60617d..0000000000
--- a/target/linux/bcm47xx/patches-5.4/310-no_highpage.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From: Jeff Hansen <jhansen@cardaccess-inc.com>
-Subject: [PATCH] no highpage
-
-On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
-seem to be caused by a kernel. They can be avoided by:
-1) Disabling highpage
-2) Using flush_cache_mm in flush_cache_dup_mm
-
-For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
----
---- a/arch/mips/include/asm/page.h
-+++ b/arch/mips/include/asm/page.h
-@@ -71,6 +71,7 @@ static inline unsigned int page_size_ftl
- #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
- 
- #include <linux/pfn.h>
-+#include <asm/cpu-features.h>
- 
- extern void build_clear_page(void);
- extern void build_copy_page(void);
-@@ -110,11 +111,16 @@ static inline void clear_user_page(void
- 		flush_data_cache_page((unsigned long)addr);
- }
- 
--struct vm_area_struct;
--extern void copy_user_highpage(struct page *to, struct page *from,
--	unsigned long vaddr, struct vm_area_struct *vma);
-+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-+	struct page *to)
-+{
-+	extern void (*flush_data_cache_page)(unsigned long addr);
- 
--#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-+	copy_page(vto, vfrom);
-+	if (!cpu_has_ic_fills_f_dc ||
-+	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-+		flush_data_cache_page((unsigned long)vto);
-+}
- 
- /*
-  * These are used to make use of C type-checking..
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -168,30 +168,6 @@ void kunmap_coherent(void)
- 	preempt_enable();
- }
- 
--void copy_user_highpage(struct page *to, struct page *from,
--	unsigned long vaddr, struct vm_area_struct *vma)
--{
--	void *vfrom, *vto;
--
--	vto = kmap_atomic(to);
--	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
--	    page_mapcount(from) && !Page_dcache_dirty(from)) {
--		vfrom = kmap_coherent(from, vaddr);
--		copy_page(vto, vfrom);
--		kunmap_coherent();
--	} else {
--		vfrom = kmap_atomic(from);
--		copy_page(vto, vfrom);
--		kunmap_atomic(vfrom);
--	}
--	if ((!cpu_has_ic_fills_f_dc) ||
--	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
--		flush_data_cache_page((unsigned long)vto);
--	kunmap_atomic(vto);
--	/* Make sure this page is cleared on other CPU's too before using it */
--	smp_wmb();
--}
--
- void copy_to_user_page(struct vm_area_struct *vma,
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
diff --git a/target/linux/bcm47xx/patches-5.4/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch b/target/linux/bcm47xx/patches-5.4/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch
deleted file mode 100644
index bde811c195..0000000000
--- a/target/linux/bcm47xx/patches-5.4/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch
+++ /dev/null
@@ -1,185 +0,0 @@
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -141,6 +141,7 @@ struct bcm47xx_board_type_list2 bcm47xx_
- 	{{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
-+	{{BCM47XX_BOARD_LINKSYS_WRT320N_V1, "Linksys WRT320N V1"}, "WRT320N", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
-@@ -161,9 +162,12 @@ struct bcm47xx_board_type_list1 bcm47xx_
- 	{{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"},
- 	{{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
- 	{{BCM47XX_BOARD_NETGEAR_R6200_V1, "Netgear R6200 V1"}, "U12H192T00_NETGEAR"},
-+	{{BCM47XX_BOARD_NETGEAR_R6300_V1, "Netgear R6300 V1"}, "U12H218T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
-+	{{BCM47XX_BOARD_NETGEAR_WN2500RP_V1, "Netgear WN2500RP V1"}, "U12H197T00_NETGEAR"},
-+	{{BCM47XX_BOARD_NETGEAR_WN2500RP_V2, "Netgear WN2500RP V2"}, "U12H294T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -27,6 +27,12 @@
- /* Asus */
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_asus_rtn10u[] __initconst = {
-+	BCM47XX_GPIO_KEY(20, KEY_WPS_BUTTON),
-+	BCM47XX_GPIO_KEY(21, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_asus_rtn12[] __initconst = {
- 	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
- 	BCM47XX_GPIO_KEY(1, KEY_RESTART),
-@@ -277,6 +283,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __in
- };
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt310n_v2[] __initconst = {
-+	BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
-+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt320n_v1[] __initconst = {
-+	BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
-+	BCM47XX_GPIO_KEY(8, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
- 	BCM47XX_GPIO_KEY(5, KEY_WIMAX),
- 	BCM47XX_GPIO_KEY(6, KEY_RESTART),
-@@ -392,6 +410,17 @@ bcm47xx_buttons_netgear_r6200_v1[] __ini
- };
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_r6300_v1[] __initconst = {
-+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_wn2500rp_v1[] __initconst = {
-+	BCM47XX_GPIO_KEY(12, KEY_RESTART),
-+	BCM47XX_GPIO_KEY(31, KEY_WPS_BUTTON),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
- 	BCM47XX_GPIO_KEY(4, KEY_RESTART),
- 	BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
-@@ -478,6 +507,9 @@ int __init bcm47xx_buttons_register(void
- 	int err;
- 
- 	switch (board) {
-+	case BCM47XX_BOARD_ASUS_RTN10U:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn10u);
-+		break;
- 	case BCM47XX_BOARD_ASUS_RTN12:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
- 		break;
-@@ -608,6 +640,12 @@ int __init bcm47xx_buttons_register(void
- 	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
- 		break;
-+	case BCM47XX_BOARD_LINKSYS_WRT310NV2:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310n_v2);
-+		break;
-+	case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt320n_v1);
-+		break;
- 	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
- 		break;
-@@ -674,6 +712,12 @@ int __init bcm47xx_buttons_register(void
- 	case BCM47XX_BOARD_NETGEAR_R6200_V1:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6200_v1);
- 		break;
-+	case BCM47XX_BOARD_NETGEAR_R6300_V1:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6300_v1);
-+		break;
-+	case BCM47XX_BOARD_NETGEAR_WN2500RP_V1:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wn2500rp_v1);
-+		break;
- 	case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
- 		break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -72,6 +72,7 @@ enum bcm47xx_board {
- 	BCM47XX_BOARD_LINKSYS_WRT300NV11,
- 	BCM47XX_BOARD_LINKSYS_WRT310NV1,
- 	BCM47XX_BOARD_LINKSYS_WRT310NV2,
-+	BCM47XX_BOARD_LINKSYS_WRT320N_V1,
- 	BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
- 	BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101,
- 	BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467,
-@@ -99,9 +100,12 @@ enum bcm47xx_board {
- 	BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
- 
- 	BCM47XX_BOARD_NETGEAR_R6200_V1,
-+	BCM47XX_BOARD_NETGEAR_R6300_V1,
- 	BCM47XX_BOARD_NETGEAR_WGR614V8,
- 	BCM47XX_BOARD_NETGEAR_WGR614V9,
- 	BCM47XX_BOARD_NETGEAR_WGR614_V10,
-+	BCM47XX_BOARD_NETGEAR_WN2500RP_V1,
-+	BCM47XX_BOARD_NETGEAR_WN2500RP_V2,
- 	BCM47XX_BOARD_NETGEAR_WNDR3300,
- 	BCM47XX_BOARD_NETGEAR_WNDR3400V1,
- 	BCM47XX_BOARD_NETGEAR_WNDR3400V2,
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -30,6 +30,14 @@
- /* Asus */
- 
- static const struct gpio_led
-+bcm47xx_leds_asus_rtn10u[] __initconst = {
-+	BCM47XX_GPIO_LED(5, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(6, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+	BCM47XX_GPIO_LED(7, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(8, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_asus_rtn12[] __initconst = {
- 	BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
- 	BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-@@ -314,6 +322,13 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc
- };
- 
- static const struct gpio_led
-+bcm47xx_leds_linksys_wrt320n_v1[] __initconst = {
-+	BCM47XX_GPIO_LED(1, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+	BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_linksys_wrt54g_generic[] __initconst = {
- 	BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
- 	BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-@@ -556,6 +571,9 @@ void __init bcm47xx_leds_register(void)
- 	enum bcm47xx_board board = bcm47xx_board_get();
- 
- 	switch (board) {
-+	case BCM47XX_BOARD_ASUS_RTN10U:
-+		bcm47xx_set_pdata(bcm47xx_leds_asus_rtn10u);
-+		break;
- 	case BCM47XX_BOARD_ASUS_RTN12:
- 		bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
- 		break;
-@@ -689,6 +707,9 @@ void __init bcm47xx_leds_register(void)
- 	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
- 		break;
-+	case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
-+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt320n_v1);
-+		break;
- 	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
- 		break;
diff --git a/target/linux/bcm47xx/patches-5.4/400-mtd-bcm47xxpart-get-nvram.patch b/target/linux/bcm47xx/patches-5.4/400-mtd-bcm47xxpart-get-nvram.patch
deleted file mode 100644
index 17abe89d1d..0000000000
--- a/target/linux/bcm47xx/patches-5.4/400-mtd-bcm47xxpart-get-nvram.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/drivers/mtd/parsers/bcm47xxpart.c
-+++ b/drivers/mtd/parsers/bcm47xxpart.c
-@@ -98,6 +98,7 @@ static int bcm47xxpart_parse(struct mtd_
- 	int trx_num = 0; /* Number of found TRX partitions */
- 	int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
- 	int err;
-+	bool found_nvram = false;
- 
- 	/*
- 	 * Some really old flashes (like AT45DB*) had smaller erasesize-s, but
-@@ -279,12 +280,23 @@ static int bcm47xxpart_parse(struct mtd_
- 		if (buf[0] == NVRAM_HEADER) {
- 			bcm47xxpart_add_part(&parts[curr_part++], "nvram",
- 					     master->size - blocksize, 0);
-+			found_nvram = true;
- 			break;
- 		}
- 	}
- 
- 	kfree(buf);
- 
-+	if (!found_nvram) {
-+		pr_err("can not find a nvram partition reserve last block\n");
-+		bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess",
-+				     master->size - blocksize * 2, MTD_WRITEABLE);
-+		for (i = 0; i < curr_part; i++) {
-+			if (parts[i].size + parts[i].offset == master->size)
-+				parts[i].offset -= blocksize * 2;
-+		}
-+	}
-+
- 	/*
- 	 * Assume that partitions end at the beginning of the one they are
- 	 * followed by.
diff --git a/target/linux/bcm47xx/patches-5.4/610-pci_ide_fix.patch b/target/linux/bcm47xx/patches-5.4/610-pci_ide_fix.patch
deleted file mode 100644
index 520828e8e5..0000000000
--- a/target/linux/bcm47xx/patches-5.4/610-pci_ide_fix.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: b.sander
-Subject: [PATCH] pci: IDE fix
-
-These are standard probing messages when using pdc202xx_old:
-pdc202xx_old 0000:00:01.0: IDE controller (0x105a:0x0d30 rev 0x02)
-PCI: Enabling device 0000:00:01.0 (0004 -> 0007)
-PCI: Fixing up device 0000:00:01.0
-0000:00:01.0: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
-0000:00:01.0: FORCING BURST BIT 0x00->0x01 ACTIVE
-pdc202xx_old 0000:00:01.0: 100% native mode on irq 6
-
-With the default MAX_HWIFS value after above we get:
-    ide2: BM-DMA at 0x0400-0x0407
-    ide3: BM-DMA at 0x0408-0x040f
-Probing IDE interface ide2...
-hde: CF500, CFA DISK drive
-
-As you can see it's ide2 + ide3 and hde.
-
-With this patch applied we get:
-    ide0: BM-DMA at 0x0400-0x0407
-    ide1: BM-DMA at 0x0408-0x040f
-Probing IDE interface ide0...
-hda: CF500, CFA DISK drive
-
-This fixes OpenWrt ticket #7061: https://dev.openwrt.org/ticket/7061
----
---- a/include/linux/ide.h
-+++ b/include/linux/ide.h
-@@ -236,7 +236,11 @@ static inline void ide_std_init_ports(st
- 	hw->io_ports.ctl_addr = ctl_addr;
- }
- 
-+#if defined CONFIG_BCM47XX
-+# define MAX_HWIFS	2
-+#else
- #define MAX_HWIFS	10
-+#endif
- 
- /*
-  * Now for the data we need to maintain per-drive:  ide_drive_t
diff --git a/target/linux/bcm47xx/patches-5.4/791-tg3-no-pci-sleep.patch b/target/linux/bcm47xx/patches-5.4/791-tg3-no-pci-sleep.patch
deleted file mode 100644
index b34f20891d..0000000000
--- a/target/linux/bcm47xx/patches-5.4/791-tg3-no-pci-sleep.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-When the Ethernet controller is powered down and someone wants to 
-access the mdio bus like the witch driver (b53) the system crashed if 
-PCI_D3hot was set before. This patch deactivates this power sawing mode 
-when a switch driver is in use.
-
---- a/drivers/net/ethernet/broadcom/tg3.c
-+++ b/drivers/net/ethernet/broadcom/tg3.c
-@@ -4279,7 +4279,8 @@ static int tg3_power_down_prepare(struct
- static void tg3_power_down(struct tg3 *tp)
- {
- 	pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE));
--	pci_set_power_state(tp->pdev, PCI_D3hot);
-+	if (!tg3_flag(tp, ROBOSWITCH))
-+		pci_set_power_state(tp->pdev, PCI_D3hot);
- }
- 
- static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u32 *speed, u8 *duplex)
diff --git a/target/linux/bcm47xx/patches-5.4/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch b/target/linux/bcm47xx/patches-5.4/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch
deleted file mode 100644
index 318dc55810..0000000000
--- a/target/linux/bcm47xx/patches-5.4/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 597715c61ae75a05ab3310a34ff3857a006f0f63 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 20 Nov 2014 21:32:42 +0100
-Subject: [PATCH] bcma: add table of serial flashes with smaller blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/bcma/driver_chipcommon_sflash.c | 29 +++++++++++++++++++++++++++++
- 1 file changed, 29 insertions(+)
-
---- a/drivers/bcma/driver_chipcommon_sflash.c
-+++ b/drivers/bcma/driver_chipcommon_sflash.c
-@@ -9,6 +9,7 @@
- 
- #include <linux/platform_device.h>
- #include <linux/bcma/bcma.h>
-+#include <bcm47xx_board.h>
- 
- static struct resource bcma_sflash_resource = {
- 	.name	= "bcma_sflash",
-@@ -42,6 +43,13 @@ static const struct bcma_sflash_tbl_e bc
- 	{ NULL },
- };
- 
-+/* Some devices use smaller blocks (and have more of them) */
-+static const struct bcma_sflash_tbl_e bcma_sflash_st_shrink_tbl[] = {
-+	{ "M25P16", 0x14, 0x1000, 512, },
-+	{ "M25P32", 0x15, 0x1000, 1024, },
-+	{ NULL },
-+};
-+
- static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
- 	{ "SST25WF512", 1, 0x1000, 16, },
- 	{ "SST25VF512", 0x48, 0x1000, 16, },
-@@ -85,6 +93,24 @@ static void bcma_sflash_cmd(struct bcma_
- 	bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
- }
- 
-+const struct bcma_sflash_tbl_e *bcma_sflash_shrink_flash(u32 id)
-+{
-+	enum bcm47xx_board board = bcm47xx_board_get();
-+	const struct bcma_sflash_tbl_e *e;
-+
-+	switch (board) {
-+	case BCM47XX_BOARD_NETGEAR_WGR614_V10:
-+	case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
-+		for (e = bcma_sflash_st_shrink_tbl; e->name; e++) {
-+			if (e->id == id)
-+				return e;
-+		}
-+		return NULL;
-+	default:
-+		return NULL;
-+	}
-+}
-+
- /* Initialize serial flash access */
- int bcma_sflash_init(struct bcma_drv_cc *cc)
- {
-@@ -115,6 +141,10 @@ int bcma_sflash_init(struct bcma_drv_cc
- 		case 0x13:
- 			return -ENOTSUPP;
- 		default:
-+			e = bcma_sflash_shrink_flash(id);
-+			if (e)
-+				break;
-+
- 			for (e = bcma_sflash_st_tbl; e->name; e++) {
- 				if (e->id == id)
- 					break;
diff --git a/target/linux/bcm47xx/patches-5.4/820-wgt634u-nvram-fix.patch b/target/linux/bcm47xx/patches-5.4/820-wgt634u-nvram-fix.patch
deleted file mode 100644
index 5f4af85df2..0000000000
--- a/target/linux/bcm47xx/patches-5.4/820-wgt634u-nvram-fix.patch
+++ /dev/null
@@ -1,295 +0,0 @@
-The Netgear wgt634u uses a different format for storing the 
-configuration. This patch is needed to read out the correct 
-configuration. The cfe_env.c file uses a different method way to read 
-out the configuration than the in kernel cfe config reader.
-
---- a/drivers/firmware/broadcom/Makefile
-+++ b/drivers/firmware/broadcom/Makefile
-@@ -1,3 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0-only
--obj-$(CONFIG_BCM47XX_NVRAM)		+= bcm47xx_nvram.o
-+obj-$(CONFIG_BCM47XX_NVRAM)		+= bcm47xx_nvram.o cfe_env.o
- obj-$(CONFIG_BCM47XX_SPROM)		+= bcm47xx_sprom.o
---- /dev/null
-+++ b/drivers/firmware/broadcom/cfe_env.c
-@@ -0,0 +1,228 @@
-+/*
-+ * CFE environment variable access
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * Copyright 2006, Felix Fietkau <nbd@nbd.name>
-+ * 
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <asm/io.h>
-+#include <linux/uaccess.h>
-+
-+#define NVRAM_SIZE       (0x1ff0)
-+static char _nvdata[NVRAM_SIZE];
-+static char _valuestr[256];
-+
-+/*
-+ * TLV types.  These codes are used in the "type-length-value"
-+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
-+ *
-+ * The layout of the flash/nvram is as follows:
-+ *
-+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
-+ *
-+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
-+ * The "length" field marks the length of the data section, not
-+ * including the type and length fields.
-+ *
-+ * Environment variables are stored as follows:
-+ *
-+ * <type_env> <length> <flags> <name> = <value>
-+ *
-+ * If bit 0 (low bit) is set, the length is an 8-bit value.
-+ * If bit 0 (low bit) is clear, the length is a 16-bit value
-+ * 
-+ * Bit 7 set indicates "user" TLVs.  In this case, bit 0 still
-+ * indicates the size of the length field.  
-+ *
-+ * Flags are from the constants below:
-+ *
-+ */
-+#define ENV_LENGTH_16BITS	0x00	/* for low bit */
-+#define ENV_LENGTH_8BITS	0x01
-+
-+#define ENV_TYPE_USER		0x80
-+
-+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
-+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
-+
-+/*
-+ * The actual TLV types we support
-+ */
-+
-+#define ENV_TLV_TYPE_END	0x00	
-+#define ENV_TLV_TYPE_ENV	ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
-+
-+/*
-+ * Environment variable flags 
-+ */
-+
-+#define ENV_FLG_NORMAL		0x00	/* normal read/write */
-+#define ENV_FLG_BUILTIN		0x01	/* builtin - not stored in flash */
-+#define ENV_FLG_READONLY	0x02	/* read-only - cannot be changed */
-+
-+#define ENV_FLG_MASK		0xFF	/* mask of attributes we keep */
-+#define ENV_FLG_ADMIN		0x100	/* lets us internally override permissions */
-+
-+
-+/*  *********************************************************************
-+    *  _nvram_read(buffer,offset,length)
-+    *  
-+    *  Read data from the NVRAM device
-+    *  
-+    *  Input parameters: 
-+    *  	   buffer - destination buffer
-+    *  	   offset - offset of data to read
-+    *  	   length - number of bytes to read
-+    *  	   
-+    *  Return value:
-+    *  	   number of bytes read, or <0 if error occured
-+    ********************************************************************* */
-+static int
-+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
-+{
-+    int i;
-+    if (offset > NVRAM_SIZE)
-+	return -1; 
-+
-+    for ( i = 0; i < length; i++) {
-+	buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
-+    }
-+    return length;
-+}
-+
-+
-+static char*
-+_strnchr(const char *dest,int c,size_t cnt)
-+{
-+	while (*dest && (cnt > 0)) {
-+	if (*dest == c) return (char *) dest;
-+	dest++;
-+	cnt--;
-+	}
-+	return NULL;
-+}
-+
-+
-+
-+/*
-+ * Core support API: Externally visible.
-+ */
-+
-+/*
-+ * Get the value of an NVRAM variable
-+ * @param	name	name of variable to get
-+ * @return	value of variable or NULL if undefined
-+ */
-+
-+char *cfe_env_get(unsigned char *nv_buf, const char *name)
-+{
-+    int size;
-+    unsigned char *buffer;
-+    unsigned char *ptr;
-+    unsigned char *envval;
-+    unsigned int reclen;
-+    unsigned int rectype;
-+    int offset;
-+    int flg;
-+    
-+	if (!strcmp(name, "nvram_type"))
-+		return "cfe";
-+	
-+    size = NVRAM_SIZE;
-+    buffer = &_nvdata[0];
-+
-+    ptr = buffer;
-+    offset = 0;
-+
-+    /* Read the record type and length */
-+    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+	goto error;
-+    }
-+    
-+    while ((*ptr != ENV_TLV_TYPE_END)  && (size > 1)) {
-+
-+	/* Adjust pointer for TLV type */
-+	rectype = *(ptr);
-+	offset++;
-+	size--;
-+
-+	/* 
-+	 * Read the length.  It can be either 1 or 2 bytes
-+	 * depending on the code 
-+	 */
-+	if (rectype & ENV_LENGTH_8BITS) {
-+	    /* Read the record type and length - 8 bits */
-+	    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+		goto error;
-+	    }
-+	    reclen = *(ptr);
-+	    size--;
-+	    offset++;
-+	}
-+	else {
-+	    /* Read the record type and length - 16 bits, MSB first */
-+	    if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
-+		goto error;
-+	    }
-+	    reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
-+	    size -= 2;
-+	    offset += 2;
-+	}
-+
-+	if (reclen > size)
-+	    break;	/* should not happen, bad NVRAM */
-+
-+	switch (rectype) {
-+	    case ENV_TLV_TYPE_ENV:
-+		/* Read the TLV data */
-+		if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
-+		    goto error;
-+		flg = *ptr++;
-+		envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
-+		if (envval) {
-+		    *envval++ = '\0';
-+		    memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
-+		    _valuestr[(reclen-1)-(envval-ptr)] = '\0';
-+#if 0			
-+		    printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
-+#endif
-+		    if(!strcmp(ptr, name)){
-+			return _valuestr;
-+		    }
-+		    if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
-+			return _valuestr;
-+		}
-+		break;
-+		
-+	    default: 
-+		/* Unknown TLV type, skip it. */
-+		break;
-+	    }
-+
-+	/*
-+	 * Advance to next TLV 
-+	 */
-+		
-+	size -= (int)reclen;
-+	offset += reclen;
-+
-+	/* Read the next record type */
-+	ptr = buffer;
-+	if (_nvram_read(nv_buf, ptr,offset,1) != 1)
-+	    goto error;
-+	}
-+
-+error:
-+    return NULL;
-+
-+}
-+
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -33,6 +33,8 @@ struct nvram_header {
- static char nvram_buf[NVRAM_SPACE];
- static size_t nvram_len;
- static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
-+static int cfe_env;
-+extern char *cfe_env_get(char *nv_buf, const char *name);
- 
- /**
-  * bcm47xx_nvram_is_valid - check for a valid NVRAM at specified memory
-@@ -80,6 +82,26 @@ static int bcm47xx_nvram_find_and_copy(v
- 		return -EEXIST;
- 	}
- 
-+	cfe_env = 0;
-+
-+	/* XXX: hack for supporting the CFE environment stuff on WGT634U */
-+	if (res_size >= 8 * 1024 * 1024) {
-+		u32 *src = (u32 *)(flash_start + 8 * 1024 * 1024 - 0x2000);
-+		u32 *dst = (u32 *)nvram_buf;
-+
-+		if ((*src & 0xff00ff) == 0x000001) {
-+			printk("early_nvram_init: WGT634U NVRAM found.\n");
-+
-+			for (i = 0; i < 0x1ff0; i++) {
-+				if (*src == 0xFFFFFFFF)
-+					break;
-+				*dst++ = *src++;
-+			}
-+			cfe_env = 1;
-+			return 0;
-+		}
-+	}
-+
- 	/* TODO: when nvram is on nand flash check for bad blocks first. */
- 
- 	/* Try every possible flash size and check for NVRAM at its end */
-@@ -172,6 +194,13 @@ int bcm47xx_nvram_getenv(const char *nam
- 	if (!name)
- 		return -EINVAL;
- 
-+	if (cfe_env) {
-+		value = cfe_env_get(nvram_buf, name);
-+		if (!value)
-+			return -ENOENT;
-+		return snprintf(val, val_len, "%s", value);
-+	}
-+
- 	if (!nvram_len) {
- 		err = nvram_init();
- 		if (err)
diff --git a/target/linux/bcm47xx/patches-5.4/830-huawei_e970_support.patch b/target/linux/bcm47xx/patches-5.4/830-huawei_e970_support.patch
deleted file mode 100644
index 1746fee592..0000000000
--- a/target/linux/bcm47xx/patches-5.4/830-huawei_e970_support.patch
+++ /dev/null
@@ -1,101 +0,0 @@
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -37,6 +37,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
- #include <linux/bcma/bcma_soc.h>
-+#include <linux/old_gpio_wdt.h>
- #include <asm/bootinfo.h>
- #include <asm/idle.h>
- #include <asm/prom.h>
-@@ -254,6 +255,33 @@ static struct fixed_phy_status bcm47xx_f
- 	.duplex	= DUPLEX_FULL,
- };
- 
-+static struct gpio_wdt_platform_data gpio_wdt_data;
-+
-+static struct platform_device gpio_wdt_device = {
-+	.name			= "gpio-wdt",
-+	.id			= 0,
-+	.dev			= {
-+		.platform_data	= &gpio_wdt_data,
-+	},
-+};
-+
-+static int __init bcm47xx_register_gpio_watchdog(void)
-+{
-+	enum bcm47xx_board board = bcm47xx_board_get();
-+
-+	switch (board) {
-+	case BCM47XX_BOARD_HUAWEI_E970:
-+		pr_info("bcm47xx: detected Huawei E970 or similar, starting early gpio_wdt timer\n");
-+		gpio_wdt_data.gpio = 7;
-+		gpio_wdt_data.interval = HZ;
-+		gpio_wdt_data.first_interval = HZ / 5;
-+		return platform_device_register(&gpio_wdt_device);
-+	default:
-+		/* Nothing to do */
-+		return 0;
-+	}
-+}
-+
- static int __init bcm47xx_register_bus_complete(void)
- {
- 	switch (bcm47xx_bus_type) {
-@@ -275,6 +303,7 @@ static int __init bcm47xx_register_bus_c
- 	bcm47xx_workarounds();
- 
- 	fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
-+	bcm47xx_register_gpio_watchdog();
- 	return 0;
- }
- device_initcall(bcm47xx_register_bus_complete);
---- a/arch/mips/configs/bcm47xx_defconfig
-+++ b/arch/mips/configs/bcm47xx_defconfig
-@@ -63,6 +63,7 @@ CONFIG_HW_RANDOM=y
- CONFIG_GPIO_SYSFS=y
- CONFIG_WATCHDOG=y
- CONFIG_BCM47XX_WDT=y
-+CONFIG_GPIO_WDT=y
- CONFIG_SSB_DRIVER_GIGE=y
- CONFIG_BCMA_DRIVER_GMAC_CMN=y
- CONFIG_USB=y
---- a/drivers/ssb/embedded.c
-+++ b/drivers/ssb/embedded.c
-@@ -34,11 +34,36 @@ int ssb_watchdog_timer_set(struct ssb_bu
- }
- EXPORT_SYMBOL(ssb_watchdog_timer_set);
- 
-+#ifdef CONFIG_BCM47XX
-+#include <bcm47xx_board.h>
-+
-+static bool ssb_watchdog_supported(void)
-+{
-+	enum bcm47xx_board board = bcm47xx_board_get();
-+
-+	/* The Huawei E970 has a hardware watchdog using a GPIO */
-+	switch (board) {
-+	case BCM47XX_BOARD_HUAWEI_E970:
-+		return false;
-+	default:
-+		return true;
-+	}
-+}
-+#else
-+static bool ssb_watchdog_supported(void)
-+{
-+	return true;
-+}
-+#endif
-+
- int ssb_watchdog_register(struct ssb_bus *bus)
- {
- 	struct bcm47xx_wdt wdt = {};
- 	struct platform_device *pdev;
- 
-+	if (!ssb_watchdog_supported())
-+		return 0;
-+
- 	if (ssb_chipco_available(&bus->chipco)) {
- 		wdt.driver_data = &bus->chipco;
- 		wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt;
diff --git a/target/linux/bcm47xx/patches-5.4/831-old_gpio_wdt.patch b/target/linux/bcm47xx/patches-5.4/831-old_gpio_wdt.patch
deleted file mode 100644
index 8414a181bb..0000000000
--- a/target/linux/bcm47xx/patches-5.4/831-old_gpio_wdt.patch
+++ /dev/null
@@ -1,360 +0,0 @@
-This generic GPIO watchdog is used on Huawei E970 (bcm47xx)
-
-Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1657,6 +1657,15 @@ config WDT_MTX1
- 	  Hardware driver for the MTX-1 boards. This is a watchdog timer that
- 	  will reboot the machine after a 100 seconds timer expired.
- 
-+config GPIO_WDT
-+	tristate "GPIO Hardware Watchdog"
-+ 	help
-+	  Hardware driver for GPIO-controlled watchdogs. GPIO pin and
-+	  toggle interval settings are platform-specific. The driver
-+	  will stop toggling the GPIO (i.e. machine reboots) after a
-+	  100 second timer expired and no process has written to
-+	  /dev/watchdog during that time.
-+
- config PNX833X_WDT
- 	tristate "PNX833x Hardware Watchdog"
- 	depends on SOC_PNX8335
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -158,6 +158,7 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
-+obj-$(CONFIG_GPIO_WDT) += old_gpio_wdt.o
- obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
---- /dev/null
-+++ b/drivers/watchdog/old_gpio_wdt.c
-@@ -0,0 +1,301 @@
-+/*
-+ *      Driver for GPIO-controlled Hardware Watchdogs.
-+ *
-+ *      Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
-+ *
-+ *      Replaces mtx1_wdt (driver for the MTX-1 Watchdog):
-+ *
-+ *      (C) Copyright 2005 4G Systems <info@4g-systems.biz>,
-+ *                              All Rights Reserved.
-+ *                              http://www.4g-systems.biz
-+ *
-+ *      (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
-+ *
-+ *      This program is free software; you can redistribute it and/or
-+ *      modify it under the terms of the GNU General Public License
-+ *      as published by the Free Software Foundation; either version
-+ *      2 of the License, or (at your option) any later version.
-+ *
-+ *      Neither Michael Stickel nor 4G Systems admit liability nor provide
-+ *      warranty for any of this software. This material is provided
-+ *      "AS-IS" and at no charge.
-+ *
-+ *      (c) Copyright 2005    4G Systems <info@4g-systems.biz>
-+ *
-+ *      Release 0.01.
-+ *      Author: Michael Stickel  michael.stickel@4g-systems.biz
-+ *
-+ *      Release 0.02.
-+ *      Author: Florian Fainelli florian@openwrt.org
-+ *              use the Linux watchdog/timer APIs
-+ *
-+ *      Release 0.03.
-+ *      Author: Mathias Adam <m.adam--linux@adamis.de>
-+ *              make it a generic gpio watchdog driver
-+ *
-+ *      The Watchdog is configured to reset the MTX-1
-+ *      if it is not triggered for 100 seconds.
-+ *      It should not be triggered more often than 1.6 seconds.
-+ *
-+ *      A timer triggers the watchdog every 5 seconds, until
-+ *      it is opened for the first time. After the first open
-+ *      it MUST be triggered every 2..95 seconds.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/timer.h>
-+#include <linux/completion.h>
-+#include <linux/jiffies.h>
-+#include <linux/watchdog.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/uaccess.h>
-+#include <linux/gpio.h>
-+#include <linux/old_gpio_wdt.h>
-+
-+static int ticks = 100 * HZ;
-+
-+static struct {
-+	struct completion stop;
-+	spinlock_t lock;
-+	int running;
-+	struct timer_list timer;
-+	int queue;
-+	int default_ticks;
-+	unsigned long inuse;
-+	unsigned gpio;
-+	unsigned int gstate;
-+	int interval;
-+	int first_interval;
-+} gpio_wdt_device;
-+
-+static void gpio_wdt_trigger(struct timer_list *unused)
-+{
-+	spin_lock(&gpio_wdt_device.lock);
-+	if (gpio_wdt_device.running && ticks > 0)
-+		ticks -= gpio_wdt_device.interval;
-+
-+	/* toggle wdt gpio */
-+	gpio_wdt_device.gstate = !gpio_wdt_device.gstate;
-+	gpio_set_value(gpio_wdt_device.gpio, gpio_wdt_device.gstate);
-+
-+	if (gpio_wdt_device.queue && ticks > 0)
-+		mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.interval);
-+	else
-+		complete(&gpio_wdt_device.stop);
-+	spin_unlock(&gpio_wdt_device.lock);
-+}
-+
-+static void gpio_wdt_reset(void)
-+{
-+	ticks = gpio_wdt_device.default_ticks;
-+}
-+
-+
-+static void gpio_wdt_start(void)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&gpio_wdt_device.lock, flags);
-+	if (!gpio_wdt_device.queue) {
-+		gpio_wdt_device.queue = 1;
-+		gpio_wdt_device.gstate = 1;
-+		gpio_set_value(gpio_wdt_device.gpio, 1);
-+		mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.first_interval);
-+	}
-+	gpio_wdt_device.running++;
-+	spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
-+}
-+
-+static int gpio_wdt_stop(void)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&gpio_wdt_device.lock, flags);
-+	if (gpio_wdt_device.queue) {
-+		gpio_wdt_device.queue = 0;
-+		gpio_wdt_device.gstate = 0;
-+		gpio_set_value(gpio_wdt_device.gpio, 0);
-+	}
-+	ticks = gpio_wdt_device.default_ticks;
-+	spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
-+	return 0;
-+}
-+
-+/* Filesystem functions */
-+
-+static int gpio_wdt_open(struct inode *inode, struct file *file)
-+{
-+	if (test_and_set_bit(0, &gpio_wdt_device.inuse))
-+		return -EBUSY;
-+	return nonseekable_open(inode, file);
-+}
-+
-+
-+static int gpio_wdt_release(struct inode *inode, struct file *file)
-+{
-+	clear_bit(0, &gpio_wdt_device.inuse);
-+	return 0;
-+}
-+
-+static long gpio_wdt_ioctl(struct file *file, unsigned int cmd,
-+							unsigned long arg)
-+{
-+	void __user *argp = (void __user *)arg;
-+	int __user *p = (int __user *)argp;
-+	unsigned int value;
-+	static const struct watchdog_info ident = {
-+		.options = WDIOF_CARDRESET,
-+		.identity = "GPIO WDT",
-+	};
-+
-+	switch (cmd) {
-+	case WDIOC_GETSUPPORT:
-+		if (copy_to_user(argp, &ident, sizeof(ident)))
-+			return -EFAULT;
-+		break;
-+	case WDIOC_GETSTATUS:
-+	case WDIOC_GETBOOTSTATUS:
-+		put_user(0, p);
-+		break;
-+	case WDIOC_SETOPTIONS:
-+		if (get_user(value, p))
-+			return -EFAULT;
-+		if (value & WDIOS_ENABLECARD)
-+			gpio_wdt_start();
-+		else if (value & WDIOS_DISABLECARD)
-+			gpio_wdt_stop();
-+		else
-+			return -EINVAL;
-+		return 0;
-+	case WDIOC_KEEPALIVE:
-+		gpio_wdt_reset();
-+		break;
-+	default:
-+		return -ENOTTY;
-+	}
-+	return 0;
-+}
-+
-+
-+static ssize_t gpio_wdt_write(struct file *file, const char *buf,
-+						size_t count, loff_t *ppos)
-+{
-+	if (!count)
-+		return -EIO;
-+	gpio_wdt_reset();
-+	return count;
-+}
-+
-+static const struct file_operations gpio_wdt_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.unlocked_ioctl	= gpio_wdt_ioctl,
-+	.open		= gpio_wdt_open,
-+	.write		= gpio_wdt_write,
-+	.release	= gpio_wdt_release,
-+};
-+
-+
-+static struct miscdevice gpio_wdt_misc = {
-+	.minor	= WATCHDOG_MINOR,
-+	.name	= "watchdog",
-+	.fops	= &gpio_wdt_fops,
-+};
-+
-+
-+static int gpio_wdt_probe(struct platform_device *pdev)
-+{
-+	int ret;
-+	struct gpio_wdt_platform_data *gpio_wdt_data = pdev->dev.platform_data;
-+
-+	gpio_wdt_device.gpio = gpio_wdt_data->gpio;
-+	gpio_wdt_device.interval = gpio_wdt_data->interval;
-+	gpio_wdt_device.first_interval = gpio_wdt_data->first_interval;
-+	if (gpio_wdt_device.first_interval <= 0) {
-+		gpio_wdt_device.first_interval = gpio_wdt_device.interval;
-+	}
-+
-+	ret = gpio_request(gpio_wdt_device.gpio, "gpio-wdt");
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "failed to request gpio");
-+		return ret;
-+	}
-+
-+	spin_lock_init(&gpio_wdt_device.lock);
-+	init_completion(&gpio_wdt_device.stop);
-+	gpio_wdt_device.queue = 0;
-+	clear_bit(0, &gpio_wdt_device.inuse);
-+	timer_setup(&gpio_wdt_device.timer, gpio_wdt_trigger, 0L);
-+	gpio_wdt_device.default_ticks = ticks;
-+
-+	gpio_wdt_start();
-+	dev_info(&pdev->dev, "GPIO Hardware Watchdog driver (gpio=%i interval=%i/%i)\n",
-+		gpio_wdt_data->gpio, gpio_wdt_data->first_interval, gpio_wdt_data->interval);
-+	return 0;
-+}
-+
-+static int gpio_wdt_remove(struct platform_device *pdev)
-+{
-+	/* FIXME: do we need to lock this test ? */
-+	if (gpio_wdt_device.queue) {
-+		gpio_wdt_device.queue = 0;
-+		wait_for_completion(&gpio_wdt_device.stop);
-+	}
-+
-+	gpio_free(gpio_wdt_device.gpio);
-+	misc_deregister(&gpio_wdt_misc);
-+	return 0;
-+}
-+
-+static struct platform_driver gpio_wdt_driver = {
-+	.probe = gpio_wdt_probe,
-+	.remove = gpio_wdt_remove,
-+	.driver.name = "gpio-wdt",
-+	.driver.owner = THIS_MODULE,
-+};
-+
-+static int __init gpio_wdt_init(void)
-+{
-+	return platform_driver_register(&gpio_wdt_driver);
-+}
-+arch_initcall(gpio_wdt_init);
-+
-+/*
-+ * We do wdt initialization in two steps: arch_initcall probes the wdt
-+ * very early to start pinging the watchdog (misc devices are not yet
-+ * available), and later module_init() just registers the misc device.
-+ */
-+static int gpio_wdt_init_late(void)
-+{
-+	int ret;
-+
-+	ret = misc_register(&gpio_wdt_misc);
-+	if (ret < 0) {
-+		pr_err("GPIO_WDT: failed to register misc device\n");
-+		return ret;
-+	}
-+	return 0;
-+}
-+#ifndef MODULE
-+module_init(gpio_wdt_init_late);
-+#endif
-+
-+static void __exit gpio_wdt_exit(void)
-+{
-+	platform_driver_unregister(&gpio_wdt_driver);
-+}
-+module_exit(gpio_wdt_exit);
-+
-+MODULE_AUTHOR("Michael Stickel, Florian Fainelli, Mathias Adam");
-+MODULE_DESCRIPTION("Driver for GPIO hardware watchdogs");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+MODULE_ALIAS("platform:gpio-wdt");
---- /dev/null
-+++ b/include/linux/old_gpio_wdt.h
-@@ -0,0 +1,21 @@
-+/*
-+ *  Definitions for the GPIO watchdog driver
-+ *
-+ *  Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef _GPIO_WDT_H_
-+#define _GPIO_WDT_H_
-+
-+struct gpio_wdt_platform_data {
-+	int	gpio;		/* GPIO line number */
-+	int	interval;	/* watchdog reset interval in system ticks */
-+	int	first_interval;	/* first wd reset interval in system ticks */
-+};
-+
-+#endif /* _GPIO_WDT_H_ */
diff --git a/target/linux/bcm47xx/patches-5.4/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch b/target/linux/bcm47xx/patches-5.4/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch
deleted file mode 100644
index 6b7ee06e50..0000000000
--- a/target/linux/bcm47xx/patches-5.4/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 5c81397a0147ea59c778d1de14ef54e2268221f6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 8 Apr 2015 06:58:11 +0200
-Subject: [PATCH] ssb: reject PCI writes setting CardBus bridge resources
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-If SoC has a CardBus we can set resources of device at slot 1 only. It's
-impossigle to set bridge resources as it simply overwrites device 1
-configuration and usually results in Data bus error-s.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/ssb/driver_pcicore.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -164,6 +164,10 @@ static int ssb_extpci_write_config(struc
- 	WARN_ON(!pc->hostmode);
- 	if (unlikely(len != 1 && len != 2 && len != 4))
- 		goto out;
-+	/* CardBus SoCs allow configuring dev 1 resources only */
-+	if (extpci_core->cardbusmode && dev != 1 &&
-+	    off >= PCI_BASE_ADDRESS_0 && off <= PCI_BASE_ADDRESS_5)
-+		goto out;
- 	addr = get_cfgspace_addr(pc, bus, dev, func, off);
- 	if (unlikely(!addr))
- 		goto out;
diff --git a/target/linux/bcm47xx/patches-5.4/940-bcm47xx-yenta.patch b/target/linux/bcm47xx/patches-5.4/940-bcm47xx-yenta.patch
deleted file mode 100644
index c7b4358c5e..0000000000
--- a/target/linux/bcm47xx/patches-5.4/940-bcm47xx-yenta.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/drivers/pcmcia/yenta_socket.c
-+++ b/drivers/pcmcia/yenta_socket.c
-@@ -921,6 +921,8 @@ static unsigned int yenta_probe_irq(stru
- 	 * Probe for usable interrupts using the force
- 	 * register to generate bogus card status events.
- 	 */
-+#ifndef CONFIG_BCM47XX
-+	/* WRT54G3G does not like this */
- 	cb_writel(socket, CB_SOCKET_EVENT, -1);
- 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
- 	reg = exca_readb(socket, I365_CSCINT);
-@@ -936,6 +938,7 @@ static unsigned int yenta_probe_irq(stru
- 	}
- 	cb_writel(socket, CB_SOCKET_MASK, 0);
- 	exca_writeb(socket, I365_CSCINT, reg);
-+#endif
- 
- 	mask = probe_irq_mask(val) & 0xffff;
- 
-@@ -1020,6 +1023,10 @@ static void yenta_get_socket_capabilitie
- 	else
- 		socket->socket.irq_mask = 0;
- 
-+	/* irq mask probing is broken for the WRT54G3G */
-+	if (socket->socket.irq_mask == 0)
-+		socket->socket.irq_mask = 0x6f8;
-+
- 	dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
- 		 socket->socket.irq_mask, socket->cb_irq);
- }
-@@ -1251,6 +1258,15 @@ static int yenta_probe(struct pci_dev *d
- 	dev_info(&dev->dev, "Socket status: %08x\n",
- 		 cb_readl(socket, CB_SOCKET_STATE));
- 
-+	/* Generate an interrupt on card insert/remove */
-+	config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
-+
-+	/* Set up Multifunction Routing Status Register */
-+	config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
-+
-+	/* Switch interrupts to parallelized */
-+	config_writeb(socket, 0x92, 0x64);
-+
- 	yenta_fixup_parent_bridge(dev->subordinate);
- 
- 	/* Register it with the pcmcia layer.. */
diff --git a/target/linux/bcm47xx/patches-5.4/976-ssb_increase_pci_delay.patch b/target/linux/bcm47xx/patches-5.4/976-ssb_increase_pci_delay.patch
deleted file mode 100644
index 99aa188374..0000000000
--- a/target/linux/bcm47xx/patches-5.4/976-ssb_increase_pci_delay.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -390,7 +390,7 @@ static void ssb_pcicore_init_hostmode(st
- 	set_io_port_base(ssb_pcicore_controller.io_map_base);
- 	/* Give some time to the PCI controller to configure itself with the new
- 	 * values. Not waiting at this point causes crashes of the machine. */
--	mdelay(10);
-+	mdelay(300);
- 	register_pci_controller(&ssb_pcicore_controller);
- }
- 
diff --git a/target/linux/bcm47xx/patches-5.4/999-wl_exports.patch b/target/linux/bcm47xx/patches-5.4/999-wl_exports.patch
deleted file mode 100644
index 7dcf028ab1..0000000000
--- a/target/linux/bcm47xx/patches-5.4/999-wl_exports.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -30,7 +30,8 @@ struct nvram_header {
- 	u32 config_ncdl;	/* ncdl values for memc */
- };
- 
--static char nvram_buf[NVRAM_SPACE];
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
- static size_t nvram_len;
- static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
- static int cfe_env;
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -62,6 +62,9 @@ void (*_dma_cache_wback_inv)(unsigned lo
- void (*_dma_cache_wback)(unsigned long start, unsigned long size);
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- 
-+EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
-+
- #endif /* CONFIG_DMA_NONCOHERENT */
- 
- /*
diff --git a/target/linux/bcm4908/config-5.4 b/target/linux/bcm4908/config-5.4
deleted file mode 100644
index 0f0b80f362..0000000000
--- a/target/linux/bcm4908/config-5.4
+++ /dev/null
@@ -1,225 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_BCM4908=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CONT_SHIFT=4
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_B53=y
-CONFIG_BCM4908_ENET=y
-CONFIG_BCM7038_WDT=y
-CONFIG_BCM7XXX_PHY=y
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BCM_PMB=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_PM=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="earlycon=bcm63xx_uart,0xff800640 console=ttyS0,115200"
-CONFIG_CMDLINE_FORCE=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_REMAP=y
-CONFIG_DRM_RCAR_WRITEBACK=y
-CONFIG_DTC=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_BRCMSTB=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BCM_UNIMAC=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND_BRCMNAND=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_OF_PARTS_BCM4908=y
-# CONFIG_MTD_OF_PARTS_LINKSYS_NS is not set
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPLIT_CFE_BOOTFS=y
-# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_BCM_SF2=y
-CONFIG_NET_DSA_TAG_BRCM=y
-CONFIG_NET_DSA_TAG_BRCM_COMMON=y
-CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NO_IOPORT_MAP=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PADATA=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_BRCM_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BCM4908=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RATIONAL=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VMAP_STACK=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/bcm4908/files-5.4/drivers/net/ethernet/broadcom/unimac.h b/target/linux/bcm4908/files-5.4/drivers/net/ethernet/broadcom/unimac.h
deleted file mode 100644
index 585a852862..0000000000
--- a/target/linux/bcm4908/files-5.4/drivers/net/ethernet/broadcom/unimac.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#ifndef __UNIMAC_H
-#define __UNIMAC_H
-
-#define UMAC_HD_BKP_CTRL		0x004
-#define  HD_FC_EN			(1 << 0)
-#define  HD_FC_BKOFF_OK			(1 << 1)
-#define  IPG_CONFIG_RX_SHIFT		2
-#define  IPG_CONFIG_RX_MASK		0x1F
-#define UMAC_CMD			0x008
-#define  CMD_TX_EN			(1 << 0)
-#define  CMD_RX_EN			(1 << 1)
-#define  CMD_SPEED_10			0
-#define  CMD_SPEED_100			1
-#define  CMD_SPEED_1000			2
-#define  CMD_SPEED_2500			3
-#define  CMD_SPEED_SHIFT		2
-#define  CMD_SPEED_MASK			3
-#define  CMD_PROMISC			(1 << 4)
-#define  CMD_PAD_EN			(1 << 5)
-#define  CMD_CRC_FWD			(1 << 6)
-#define  CMD_PAUSE_FWD			(1 << 7)
-#define  CMD_RX_PAUSE_IGNORE		(1 << 8)
-#define  CMD_TX_ADDR_INS		(1 << 9)
-#define  CMD_HD_EN			(1 << 10)
-#define  CMD_SW_RESET_OLD		(1 << 11)
-#define  CMD_SW_RESET			(1 << 13)
-#define  CMD_LCL_LOOP_EN		(1 << 15)
-#define  CMD_AUTO_CONFIG		(1 << 22)
-#define  CMD_CNTL_FRM_EN		(1 << 23)
-#define  CMD_NO_LEN_CHK			(1 << 24)
-#define  CMD_RMT_LOOP_EN		(1 << 25)
-#define  CMD_RX_ERR_DISC		(1 << 26)
-#define  CMD_PRBL_EN			(1 << 27)
-#define  CMD_TX_PAUSE_IGNORE		(1 << 28)
-#define  CMD_TX_RX_EN			(1 << 29)
-#define  CMD_RUNT_FILTER_DIS		(1 << 30)
-#define UMAC_MAC0			0x00c
-#define UMAC_MAC1			0x010
-#define UMAC_MAX_FRAME_LEN		0x014
-#define UMAC_PAUSE_QUANTA		0x018
-#define UMAC_MODE			0x044
-#define  MODE_LINK_STATUS		(1 << 5)
-#define UMAC_FRM_TAG0			0x048		/* outer tag */
-#define UMAC_FRM_TAG1			0x04c		/* inner tag */
-#define UMAC_TX_IPG_LEN			0x05c
-#define UMAC_EEE_CTRL			0x064
-#define  EN_LPI_RX_PAUSE		(1 << 0)
-#define  EN_LPI_TX_PFC			(1 << 1)
-#define  EN_LPI_TX_PAUSE		(1 << 2)
-#define  EEE_EN				(1 << 3)
-#define  RX_FIFO_CHECK			(1 << 4)
-#define  EEE_TX_CLK_DIS			(1 << 5)
-#define  DIS_EEE_10M			(1 << 6)
-#define  LP_IDLE_PREDICTION_MODE	(1 << 7)
-#define UMAC_EEE_LPI_TIMER		0x068
-#define UMAC_EEE_WAKE_TIMER		0x06C
-#define UMAC_EEE_REF_COUNT		0x070
-#define  EEE_REFERENCE_COUNT_MASK	0xffff
-#define UMAC_RX_IPG_INV			0x078
-#define UMAC_MACSEC_PROG_TX_CRC		0x310
-#define UMAC_MACSEC_CTRL		0x314
-#define UMAC_PAUSE_CTRL			0x330
-#define UMAC_TX_FLUSH			0x334
-#define UMAC_RX_FIFO_STATUS		0x338
-#define UMAC_TX_FIFO_STATUS		0x33c
-
-#endif
diff --git a/target/linux/bcm4908/patches-5.4/030-v5.11-0001-dt-bindings-arm-bcm-document-BCM4908-bindings.patch b/target/linux/bcm4908/patches-5.4/030-v5.11-0001-dt-bindings-arm-bcm-document-BCM4908-bindings.patch
deleted file mode 100644
index 66726cbf0b..0000000000
--- a/target/linux/bcm4908/patches-5.4/030-v5.11-0001-dt-bindings-arm-bcm-document-BCM4908-bindings.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 2f8913a7b17efd3a116825160a2d3a6610444587 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 12 Nov 2020 16:08:31 +0100
-Subject: [PATCH] dt-bindings: arm: bcm: document BCM4908 bindings
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 is a new family that includes BCM4906, BCM4908 and BCM49408.
-It's mostly used in home routers and often replaces Northstar in vendors
-portfolio.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bindings/arm/bcm/brcm,bcm4908.yaml        | 38 +++++++++++++++++++
- 1 file changed, 38 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-@@ -0,0 +1,38 @@
-+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4908.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom BCM4908 device tree bindings
-+
-+description:
-+  Broadcom BCM4906 / BCM4908 / BCM49408 Wi-Fi/network SoCs with Brahma CPUs.
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  $nodename:
-+    const: '/'
-+  compatible:
-+    oneOf:
-+      - description: BCM4906 based boards
-+        items:
-+          - const: brcm,bcm4906
-+          - const: brcm,bcm4908
-+
-+      - description: BCM4908 based boards
-+        items:
-+          - enum:
-+              - asus,gt-ac5300
-+          - const: brcm,bcm4908
-+
-+      - description: BCM49408 based boards
-+        items:
-+          - const: brcm,bcm49408
-+          - const: brcm,bcm4908
-+
-+additionalProperties: true
-+
-+...
diff --git a/target/linux/bcm4908/patches-5.4/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch b/target/linux/bcm4908/patches-5.4/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch
deleted file mode 100644
index 3598b5b9c7..0000000000
--- a/target/linux/bcm4908/patches-5.4/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch
+++ /dev/null
@@ -1,307 +0,0 @@
-From 2961f69f151c0a6771f55cef46398fe49ca20902 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 12 Nov 2020 16:08:32 +0100
-Subject: [PATCH] arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early
- DTS files
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-They don't descibe hardware fully yet but it's enough to boot a system.
-
-Some missing blocks:
-1. PMC (Power Management Controller?)
-2. Ethernet
-3. Crypto
-4. Thermal
-
-Asus DTS is missing defining full NAND partitions layout and buttons.
-
-Further changes will fill those gaps as soon as required bindings will
-be found / tested / added.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/Makefile         |   1 +
- arch/arm64/boot/dts/broadcom/bcm4908/Makefile |   2 +
- .../bcm4908/bcm4908-asus-gt-ac5300.dts        |  66 +++++++
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi    | 187 ++++++++++++++++++
- 4 files changed, 256 insertions(+)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-
---- a/arch/arm64/boot/dts/broadcom/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/Makefile
-@@ -4,5 +4,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rp
- 			      bcm2837-rpi-3-b-plus.dtb \
- 			      bcm2837-rpi-cm3-io3.dtb
- 
-+subdir-y	+= bcm4908
- subdir-y	+= northstar2
- subdir-y	+= stingray
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-@@ -0,0 +1,2 @@
-+# SPDX-License-Identifier: GPL-2.0
-+dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -0,0 +1,66 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
-+#include "bcm4908.dtsi"
-+
-+/ {
-+	compatible = "asus,gt-ac5300", "brcm,bcm4908";
-+	model = "Asus GT-AC5300";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00 0x00 0x00 0x40000000>;
-+	};
-+
-+	gpio-keys-polled {
-+		compatible = "gpio-keys-polled";
-+		poll-interval = <100>;
-+
-+		wifi {
-+			label = "WiFi";
-+			linux,code = <KEY_RFKILL>;
-+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		brightness {
-+			label = "LEDs";
-+			linux,code = <KEY_BRIGHTNESS_ZERO>;
-+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&nandcs {
-+	nand-ecc-strength = <4>;
-+	nand-ecc-step-size = <512>;
-+	nand-on-flash-bbt;
-+	brcm,nand-has-wp;
-+
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			label = "cferom";
-+			reg = <0x0 0x100000>;
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -0,0 +1,187 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/dts-v1/;
-+
-+/ {
-+	interrupt-parent = <&gic>;
-+
-+	#address-cells = <2>;
-+	#size-cells = <2>;
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	cpus {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		cpu0: cpu@0 {
-+			device_type = "cpu";
-+			compatible = "brcm,brahma-b53";
-+			reg = <0x0>;
-+			next-level-cache = <&l2>;
-+		};
-+
-+		cpu1: cpu@1 {
-+			device_type = "cpu";
-+			compatible = "brcm,brahma-b53";
-+			reg = <0x1>;
-+			enable-method = "spin-table";
-+			cpu-release-addr = <0x0 0xfff8>;
-+			next-level-cache = <&l2>;
-+		};
-+
-+		cpu2: cpu@2 {
-+			device_type = "cpu";
-+			compatible = "brcm,brahma-b53";
-+			reg = <0x2>;
-+			enable-method = "spin-table";
-+			cpu-release-addr = <0x0 0xfff8>;
-+			next-level-cache = <&l2>;
-+		};
-+
-+		cpu3: cpu@3 {
-+			device_type = "cpu";
-+			compatible = "brcm,brahma-b53";
-+			reg = <0x3>;
-+			enable-method = "spin-table";
-+			cpu-release-addr = <0x0 0xfff8>;
-+			next-level-cache = <&l2>;
-+		};
-+
-+		l2: l2-cache0 {
-+			compatible = "cache";
-+		};
-+	};
-+
-+	axi@81000000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x00 0x00 0x81000000 0x4000>;
-+
-+		gic: interrupt-controller@1000 {
-+			compatible = "arm,gic-400";
-+			#interrupt-cells = <3>;
-+			#address-cells = <0>;
-+			interrupt-controller;
-+			reg = <0x1000 0x1000>,
-+			      <0x2000 0x2000>;
-+		};
-+	};
-+
-+	timer {
-+		compatible = "arm,armv8-timer";
-+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-+	};
-+
-+	pmu {
-+		compatible = "arm,cortex-a53-pmu";
-+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-+	};
-+
-+	clocks {
-+		periph_clk: periph_clk {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <50000000>;
-+			clock-output-names = "periph";
-+		};
-+	};
-+
-+	soc {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x00 0x00 0x80000000 0x10000>;
-+
-+		usb@c300 {
-+			compatible = "generic-ehci";
-+			reg = <0xc300 0x100>;
-+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
-+		usb@c400 {
-+			compatible = "generic-ohci";
-+			reg = <0xc400 0x100>;
-+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
-+		usb@d000 {
-+			compatible = "generic-xhci";
-+			reg = <0xd000 0x8c8>;
-+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+	};
-+
-+	bus@ff800000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x00 0x00 0xff800000 0x3000>;
-+
-+		timer: timer@400 {
-+			compatible = "brcm,bcm6328-timer", "syscon";
-+			reg = <0x400 0x3c>;
-+		};
-+
-+		gpio0: gpio-controller@500 {
-+			compatible = "brcm,bcm6345-gpio";
-+			reg-names = "dirout", "dat";
-+			reg = <0x500 0x28>, <0x528 0x28>;
-+
-+			#gpio-cells = <2>;
-+			gpio-controller;
-+		};
-+
-+		uart0: serial@640 {
-+			compatible = "brcm,bcm6345-uart";
-+			reg = <0x640 0x18>;
-+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&periph_clk>;
-+			clock-names = "periph";
-+			status = "okay";
-+		};
-+
-+		nand@1800 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
-+			reg = <0x1800 0x600>, <0x2000 0x10>;
-+			reg-names = "nand", "nand-int-base";
-+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "nand";
-+			status = "okay";
-+
-+			nandcs: nandcs@0 {
-+				compatible = "brcm,nandcs";
-+				reg = <0>;
-+			};
-+		};
-+
-+		reboot {
-+			compatible = "syscon-reboot";
-+			regmap = <&timer>;
-+			offset = <0x34>;
-+			mask = <1>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm4908/patches-5.4/030-v5.11-0003-v5.11-arm64-add-config-for-Broadcom-BCM4908-SoCs.patch b/target/linux/bcm4908/patches-5.4/030-v5.11-0003-v5.11-arm64-add-config-for-Broadcom-BCM4908-SoCs.patch
deleted file mode 100644
index 42bdbf51b6..0000000000
--- a/target/linux/bcm4908/patches-5.4/030-v5.11-0003-v5.11-arm64-add-config-for-Broadcom-BCM4908-SoCs.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From dccb22d078ebd098115e4f66bde1ee2249c8640b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 12 Nov 2020 16:08:30 +0100
-Subject: [PATCH] arm64: add config for Broadcom BCM4908 SoCs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add ARCH_BCM4908 config that can be used for compiling DTS files.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/Kconfig.platforms | 8 ++++++++
- arch/arm64/configs/defconfig | 1 +
- 2 files changed, 9 insertions(+)
-
---- a/arch/arm64/Kconfig.platforms
-+++ b/arch/arm64/Kconfig.platforms
-@@ -43,6 +43,14 @@ config ARCH_BCM2835
- 	  This enables support for the Broadcom BCM2837 SoC.
- 	  This SoC is used in the Raspberry Pi 3 device.
- 
-+config ARCH_BCM4908
-+	bool "Broadcom BCM4908 family"
-+	select GPIOLIB
-+	help
-+	  This enables support for the Broadcom BCM4906, BCM4908 and
-+	  BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be
-+	  found in home routers.
-+
- config ARCH_BCM_IPROC
- 	bool "Broadcom iProc SoC Family"
- 	select COMMON_CLK_IPROC
---- a/arch/arm64/configs/defconfig
-+++ b/arch/arm64/configs/defconfig
-@@ -33,6 +33,7 @@ CONFIG_ARCH_AGILEX=y
- CONFIG_ARCH_SUNXI=y
- CONFIG_ARCH_ALPINE=y
- CONFIG_ARCH_BCM2835=y
-+CONFIG_ARCH_BCM4908=y
- CONFIG_ARCH_BCM_IPROC=y
- CONFIG_ARCH_BERLIN=y
- CONFIG_ARCH_BRCMSTB=y
diff --git a/target/linux/bcm4908/patches-5.4/031-v5.12-0001-dt-bindings-arm-bcm-document-Netgear-R8000P-binding.patch b/target/linux/bcm4908/patches-5.4/031-v5.12-0001-dt-bindings-arm-bcm-document-Netgear-R8000P-binding.patch
deleted file mode 100644
index 24a0749c77..0000000000
--- a/target/linux/bcm4908/patches-5.4/031-v5.12-0001-dt-bindings-arm-bcm-document-Netgear-R8000P-binding.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 3a5da4f54801ac42837a0b3151fa8285e01e8b0e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 8 Dec 2020 08:03:03 +0100
-Subject: [PATCH] dt-bindings: arm: bcm: document Netgear R8000P binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's a BCM4906 based device.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-@@ -19,6 +19,8 @@ properties:
-     oneOf:
-       - description: BCM4906 based boards
-         items:
-+          - enum:
-+              - netgear,r8000p
-           - const: brcm,bcm4906
-           - const: brcm,bcm4908
- 
diff --git a/target/linux/bcm4908/patches-5.4/031-v5.12-0002-arm64-dts-broadcom-bcm4908-add-BCM4906-Netgear-R8000.patch b/target/linux/bcm4908/patches-5.4/031-v5.12-0002-arm64-dts-broadcom-bcm4908-add-BCM4906-Netgear-R8000.patch
deleted file mode 100644
index 93fa2150af..0000000000
--- a/target/linux/bcm4908/patches-5.4/031-v5.12-0002-arm64-dts-broadcom-bcm4908-add-BCM4906-Netgear-R8000.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From c8b404fb05dcfadff477e49b7ea6b500e015f101 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 8 Dec 2020 08:03:04 +0100
-Subject: [PATCH 2/4] arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P
- DTS files
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Netgear R8000P is home router based on BCM4906 that is a cheaper variant
-of BCM4908 (e.g. 2 cores instead of 4).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/Makefile |  1 +
- .../bcm4908/bcm4906-netgear-r8000p.dts        | 52 +++++++++++++++++++
- .../boot/dts/broadcom/bcm4908/bcm4906.dtsi    | 18 +++++++
- 3 files changed, 71 insertions(+)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-@@ -1,2 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0
-+dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
- dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -0,0 +1,52 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
-+
-+#include "bcm4906.dtsi"
-+
-+/ {
-+	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908";
-+	model = "Netgear R8000P";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00 0x00 0x00 0x20000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		wps {
-+			function = LED_FUNCTION_WPS;
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&nandcs {
-+	nand-ecc-strength = <4>;
-+	nand-ecc-step-size = <512>;
-+	nand-on-flash-bbt;
-+
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			label = "cferom";
-+			reg = <0x0 0x100000>;
-+		};
-+
-+		partition@100000 {
-+			label = "firmware";
-+			reg = <0x100000 0x4400000>;
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
-@@ -0,0 +1,18 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include "bcm4908.dtsi"
-+
-+/ {
-+	cpus {
-+		/delete-node/ cpu@2;
-+
-+		/delete-node/ cpu@3;
-+	};
-+
-+	pmu {
-+		compatible = "arm,cortex-a53-pmu";
-+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupt-affinity = <&cpu0>, <&cpu1>;
-+	};
-+};
diff --git a/target/linux/bcm4908/patches-5.4/031-v5.12-0003-arm64-dts-broadcom-bcm4908-use-proper-NAND-binding.patch b/target/linux/bcm4908/patches-5.4/031-v5.12-0003-arm64-dts-broadcom-bcm4908-use-proper-NAND-binding.patch
deleted file mode 100644
index ccd260fadf..0000000000
--- a/target/linux/bcm4908/patches-5.4/031-v5.12-0003-arm64-dts-broadcom-bcm4908-use-proper-NAND-binding.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 56098be85d19cd56b59d7b3854ea035cc8cb9e95 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 8 Dec 2020 11:49:50 +0100
-Subject: [PATCH 3/4] arm64: dts: broadcom: bcm4908: use proper NAND binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 has controller that needs different IRQ handling just like the
-BCM63138. Describe it properly.
-
-On Linux this change fixes:
-brcmstb_nand ff801800.nand: timeout waiting for command 0x9
-brcmstb_nand ff801800.nand: intfc status d0000000
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -164,7 +164,7 @@
- 		nand@1800 {
- 			#address-cells = <1>;
- 			#size-cells = <0>;
--			compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
-+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
- 			reg = <0x1800 0x600>, <0x2000 0x10>;
- 			reg-names = "nand", "nand-int-base";
- 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/target/linux/bcm4908/patches-5.4/031-v5.12-0004-arm64-dts-broadcom-bcm4908-describe-PCIe-reset-contr.patch b/target/linux/bcm4908/patches-5.4/031-v5.12-0004-arm64-dts-broadcom-bcm4908-describe-PCIe-reset-contr.patch
deleted file mode 100644
index 8ce4d69d8f..0000000000
--- a/target/linux/bcm4908/patches-5.4/031-v5.12-0004-arm64-dts-broadcom-bcm4908-describe-PCIe-reset-contr.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 1b88c6ed26a1aa1d68d1661404e6e939709ff530 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 10 Dec 2020 08:21:54 +0100
-Subject: [PATCH 4/4] arm64: dts: broadcom: bcm4908: describe PCIe reset
- controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reset controller is a single register in the Broadcom's MISC block.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -177,6 +177,21 @@
- 			};
- 		};
- 
-+		misc@2600 {
-+			compatible = "brcm,misc", "simple-mfd";
-+			reg = <0x2600 0xe4>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0x00 0x2600 0xe4>;
-+
-+			reset-controller@2644 {
-+				compatible = "brcm,bcm4908-misc-pcie-reset";
-+				reg = <0x44 0x04>;
-+				#reset-cells = <1>;
-+			};
-+		};
-+
- 		reboot {
- 			compatible = "syscon-reboot";
- 			regmap = <&timer>;
diff --git a/target/linux/bcm4908/patches-5.4/031-v5.12-0005-arm64-dts-broadcom-bcm4908-describe-internal-switch.patch b/target/linux/bcm4908/patches-5.4/031-v5.12-0005-arm64-dts-broadcom-bcm4908-describe-internal-switch.patch
deleted file mode 100644
index f80dc239bc..0000000000
--- a/target/linux/bcm4908/patches-5.4/031-v5.12-0005-arm64-dts-broadcom-bcm4908-describe-internal-switch.patch
+++ /dev/null
@@ -1,184 +0,0 @@
-From 527a3ac9bdf81da4b7160ce3cea57f28a0e5eb64 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 13 Jan 2021 12:14:06 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe internal switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 has internal switch with 5 GPHYs. Ports 0 - 3 are always
-connected to the internal PHYs. Remaining ports depend on device setup.
-
-Asus GT-AC5300 has an extra switch with its PHYs accessible using the
-internal MDIO.
-
-CPU port and Ethernet interface remain to be documented.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bcm4908/bcm4908-asus-gt-ac5300.dts        | 51 +++++++++++
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi    | 85 ++++++++++++++++++-
- 2 files changed, 135 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -44,6 +44,57 @@
- 	};
- };
- 
-+&ports {
-+	port@0 {
-+		label = "lan2";
-+	};
-+
-+	port@1 {
-+		label = "lan1";
-+	};
-+
-+	port@2 {
-+		label = "lan6";
-+	};
-+
-+	port@3 {
-+		label = "lan5";
-+	};
-+
-+	/* External BCM53134S switch */
-+	port@7 {
-+		label = "sw";
-+		reg = <7>;
-+
-+		fixed-link {
-+			speed = <1000>;
-+			full-duplex;
-+		};
-+	};
-+};
-+
-+&mdio {
-+	/* lan8 */
-+	ethernet-phy@0 {
-+		reg = <0>;
-+	};
-+
-+	/* lan7 */
-+	ethernet-phy@1 {
-+		reg = <1>;
-+	};
-+
-+	/* lan4 */
-+	ethernet-phy@2 {
-+		reg = <2>;
-+	};
-+
-+	/* lan3 */
-+	ethernet-phy@3 {
-+		reg = <3>;
-+	};
-+};
-+
- &nandcs {
- 	nand-ecc-strength = <4>;
- 	nand-ecc-step-size = <512>;
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -108,7 +108,7 @@
- 		compatible = "simple-bus";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
--		ranges = <0x00 0x00 0x80000000 0x10000>;
-+		ranges = <0x00 0x00 0x80000000 0xd0000>;
- 
- 		usb@c300 {
- 			compatible = "generic-ehci";
-@@ -130,6 +130,89 @@
- 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- 			status = "disabled";
- 		};
-+
-+		ethernet-switch@80000 {
-+			compatible = "simple-bus";
-+			#size-cells = <1>;
-+			#address-cells = <1>;
-+			ranges = <0 0x80000 0x50000>;
-+
-+			ethernet-switch@0 {
-+				compatible = "brcm,bcm4908-switch";
-+				reg = <0x0 0x40000>,
-+				      <0x40000 0x110>,
-+				      <0x40340 0x30>,
-+				      <0x40380 0x30>,
-+				      <0x40600 0x34>,
-+				      <0x40800 0x208>;
-+				reg-names = "core", "reg", "intrl2_0",
-+					    "intrl2_1", "fcb", "acb";
-+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-+					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-+				brcm,num-gphy = <5>;
-+				brcm,num-rgmii-ports = <2>;
-+
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				ports: ports {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+
-+					port@0 {
-+						reg = <0>;
-+						phy-mode = "internal";
-+						phy-handle = <&phy8>;
-+					};
-+
-+					port@1 {
-+						reg = <1>;
-+						phy-mode = "internal";
-+						phy-handle = <&phy9>;
-+					};
-+
-+					port@2 {
-+						reg = <2>;
-+						phy-mode = "internal";
-+						phy-handle = <&phy10>;
-+					};
-+
-+					port@3 {
-+						reg = <3>;
-+						phy-mode = "internal";
-+						phy-handle = <&phy11>;
-+					};
-+				};
-+			};
-+
-+			mdio: mdio@405c0 {
-+				compatible = "brcm,unimac-mdio";
-+				reg = <0x405c0 0x8>;
-+				reg-names = "mdio";
-+				#size-cells = <0>;
-+				#address-cells = <1>;
-+
-+				phy8: ethernet-phy@8 {
-+					reg = <8>;
-+				};
-+
-+				phy9: ethernet-phy@9 {
-+					reg = <9>;
-+				};
-+
-+				phy10: ethernet-phy@a {
-+					reg = <10>;
-+				};
-+
-+				phy11: ethernet-phy@b {
-+					reg = <11>;
-+				};
-+
-+				phy12: ethernet-phy@c {
-+					reg = <12>;
-+				};
-+			};
-+		};
- 	};
- 
- 	bus@ff800000 {
diff --git a/target/linux/bcm4908/patches-5.4/031-v5.12-0006-arm64-dts-broadcom-bcm4908-describe-PMB-block.patch b/target/linux/bcm4908/patches-5.4/031-v5.12-0006-arm64-dts-broadcom-bcm4908-describe-PMB-block.patch
deleted file mode 100644
index c1a9c35837..0000000000
--- a/target/linux/bcm4908/patches-5.4/031-v5.12-0006-arm64-dts-broadcom-bcm4908-describe-PMB-block.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From edcf90801c8e58bd6306d85a4e714a6f09f452df Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 13 Jan 2021 12:15:47 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe PMB block
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-PMB (Power Management Bus) controls powering connected devices (e.g.
-PCIe, USB, SATA). In BCM4908 it's a part of the PROCMON block.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi      | 17 ++++++++++++++++-
- 1 file changed, 16 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -108,7 +108,7 @@
- 		compatible = "simple-bus";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
--		ranges = <0x00 0x00 0x80000000 0xd0000>;
-+		ranges = <0x00 0x00 0x80000000 0x281000>;
- 
- 		usb@c300 {
- 			compatible = "generic-ehci";
-@@ -213,6 +213,21 @@
- 				};
- 			};
- 		};
-+
-+		procmon: syscon@280000 {
-+			compatible = "simple-bus";
-+			reg = <0x280000 0x1000>;
-+			ranges;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			power-controller@2800c0 {
-+				compatible = "brcm,bcm4908-pmb";
-+				reg = <0x2800c0 0x40>;
-+				#power-domain-cells = <1>;
-+			};
-+		};
- 	};
- 
- 	bus@ff800000 {
diff --git a/target/linux/bcm4908/patches-5.4/032-v5.13-0001-arm64-dts-broadcom-bcm4908-describe-USB-PHY.patch b/target/linux/bcm4908/patches-5.4/032-v5.13-0001-arm64-dts-broadcom-bcm4908-describe-USB-PHY.patch
deleted file mode 100644
index edf2ca6a38..0000000000
--- a/target/linux/bcm4908/patches-5.4/032-v5.13-0001-arm64-dts-broadcom-bcm4908-describe-USB-PHY.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From 3c321ba794ca6383a4aa68ea803e18cc6ad44412 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 19 Feb 2021 06:50:26 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe USB PHY
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 uses slightly modified STB family USB PHY. It handles OHCI/EHCI
-and XHCI. It requires powering up using the PMB.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bcm4908/bcm4906-netgear-r8000p.dts        | 17 +++++++++++++
- .../bcm4908/bcm4908-asus-gt-ac5300.dts        | 17 +++++++++++++
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi    | 25 ++++++++++++++++---
- 3 files changed, 55 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -26,6 +26,23 @@
- 	};
- };
- 
-+&usb_phy {
-+	brcm,ioc = <1>;
-+	status = "okay";
-+};
-+
-+&ehci {
-+	status = "okay";
-+};
-+
-+&ohci {
-+	status = "okay";
-+};
-+
-+&xhci {
-+	status = "okay";
-+};
-+
- &nandcs {
- 	nand-ecc-strength = <4>;
- 	nand-ecc-step-size = <512>;
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -44,6 +44,23 @@
- 	};
- };
- 
-+&usb_phy {
-+	brcm,ioc = <1>;
-+	status = "okay";
-+};
-+
-+&ehci {
-+	status = "okay";
-+};
-+
-+&ohci {
-+	status = "okay";
-+};
-+
-+&xhci {
-+	status = "okay";
-+};
-+
- &ports {
- 	port@0 {
- 		label = "lan2";
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -2,6 +2,8 @@
- 
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/phy/phy.h>
-+#include <dt-bindings/soc/bcm-pmb.h>
- 
- /dts-v1/;
- 
-@@ -110,24 +112,39 @@
- 		#size-cells = <1>;
- 		ranges = <0x00 0x00 0x80000000 0x281000>;
- 
--		usb@c300 {
-+		usb_phy: usb-phy@c200 {
-+			compatible = "brcm,bcm4908-usb-phy";
-+			reg = <0xc200 0x100>;
-+			reg-names = "ctrl";
-+			power-domains = <&pmb BCM_PMB_HOST_USB>;
-+			dr_mode = "host";
-+			brcm,has-xhci;
-+			brcm,has-eohci;
-+			#phy-cells = <1>;
-+			status = "disabled";
-+		};
-+
-+		ehci: usb@c300 {
- 			compatible = "generic-ehci";
- 			reg = <0xc300 0x100>;
- 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-+			phys = <&usb_phy PHY_TYPE_USB2>;
- 			status = "disabled";
- 		};
- 
--		usb@c400 {
-+		ohci: usb@c400 {
- 			compatible = "generic-ohci";
- 			reg = <0xc400 0x100>;
- 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-+			phys = <&usb_phy PHY_TYPE_USB2>;
- 			status = "disabled";
- 		};
- 
--		usb@d000 {
-+		xhci: usb@d000 {
- 			compatible = "generic-xhci";
- 			reg = <0xd000 0x8c8>;
- 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-+			phys = <&usb_phy PHY_TYPE_USB3>;
- 			status = "disabled";
- 		};
- 
-@@ -222,7 +239,7 @@
- 			#address-cells = <1>;
- 			#size-cells = <1>;
- 
--			power-controller@2800c0 {
-+			pmb: power-controller@2800c0 {
- 				compatible = "brcm,bcm4908-pmb";
- 				reg = <0x2800c0 0x40>;
- 				#power-domain-cells = <1>;
diff --git a/target/linux/bcm4908/patches-5.4/032-v5.13-0002-arm64-dts-broadcom-bcm4908-describe-Ethernet-control.patch b/target/linux/bcm4908/patches-5.4/032-v5.13-0002-arm64-dts-broadcom-bcm4908-describe-Ethernet-control.patch
deleted file mode 100644
index 6c41e3d797..0000000000
--- a/target/linux/bcm4908/patches-5.4/032-v5.13-0002-arm64-dts-broadcom-bcm4908-describe-Ethernet-control.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From b1bbe48eec190b6a35f400c5a3ec6b0fc8fc3fe6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 19 Feb 2021 06:50:27 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe Ethernet controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 SoCs have an integrated Ethernet controller.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi    | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -112,6 +112,14 @@
- 		#size-cells = <1>;
- 		ranges = <0x00 0x00 0x80000000 0x281000>;
- 
-+		enet: ethernet@2000 {
-+			compatible = "brcm,bcm4908-enet";
-+			reg = <0x2000 0x1000>;
-+
-+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "rx";
-+		};
-+
- 		usb_phy: usb-phy@c200 {
- 			compatible = "brcm,bcm4908-usb-phy";
- 			reg = <0xc200 0x100>;
-@@ -199,6 +207,17 @@
- 						phy-mode = "internal";
- 						phy-handle = <&phy11>;
- 					};
-+
-+					port@8 {
-+						reg = <8>;
-+						phy-mode = "internal";
-+						ethernet = <&enet>;
-+
-+						fixed-link {
-+							speed = <1000>;
-+							full-duplex;
-+						};
-+					};
- 				};
- 			};
- 
diff --git a/target/linux/bcm4908/patches-5.4/032-v5.13-0003-arm64-dts-broadcom-bcm4908-describe-Netgear-R8000P-s.patch b/target/linux/bcm4908/patches-5.4/032-v5.13-0003-arm64-dts-broadcom-bcm4908-describe-Netgear-R8000P-s.patch
deleted file mode 100644
index 9c7f9cee6c..0000000000
--- a/target/linux/bcm4908/patches-5.4/032-v5.13-0003-arm64-dts-broadcom-bcm4908-describe-Netgear-R8000P-s.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 406e98afffe975982f63ea5d21bf9a47a81b56ee Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 19 Feb 2021 06:50:28 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-R8000P model has 4 LAN ports and 1 WAN port.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bcm4908/bcm4906-netgear-r8000p.dts        | 25 +++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -43,6 +43,31 @@
- 	status = "okay";
- };
- 
-+&ports {
-+	port@0 {
-+		label = "lan4";
-+	};
-+
-+	port@1 {
-+		label = "lan3";
-+	};
-+
-+	port@2 {
-+		label = "lan2";
-+	};
-+
-+	port@3 {
-+		label = "lan1";
-+	};
-+
-+	port@7 {
-+		reg = <7>;
-+		phy-mode = "internal";
-+		phy-handle = <&phy12>;
-+		label = "wan";
-+	};
-+};
-+
- &nandcs {
- 	nand-ecc-strength = <4>;
- 	nand-ecc-step-size = <512>;
diff --git a/target/linux/bcm4908/patches-5.4/032-v5.13-0004-arm64-dts-broadcom-bcm4908-add-remaining-Netgear-R80.patch b/target/linux/bcm4908/patches-5.4/032-v5.13-0004-arm64-dts-broadcom-bcm4908-add-remaining-Netgear-R80.patch
deleted file mode 100644
index 56249c82f8..0000000000
--- a/target/linux/bcm4908/patches-5.4/032-v5.13-0004-arm64-dts-broadcom-bcm4908-add-remaining-Netgear-R80.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 6224415c0389ba6661825746312163a64ece8f3a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 19 Feb 2021 06:50:29 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P
- LEDs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are a few more GPIO connected LEDs there didn't get described
-initially.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bcm4908/bcm4906-netgear-r8000p.dts        | 50 ++++++++++++++++++-
- 1 file changed, 49 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -18,11 +18,59 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		wps {
-+		led-power-white {
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-power-amber {
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_AMBER>;
-+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-wps {
- 			function = LED_FUNCTION_WPS;
- 			color = <LED_COLOR_ID_WHITE>;
- 			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- 		};
-+
-+		led-2ghz {
-+			function = "2ghz";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-5ghz-1 {
-+			function = "5ghz-1";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-5ghz-2 {
-+			function = "5ghz-2";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-usb2 {
-+			function = "usb2";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-usb3 {
-+			function = "usb3";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-wifi {
-+			function = "wifi";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
-+		};
- 	};
- };
- 
diff --git a/target/linux/bcm4908/patches-5.4/032-v5.13-0005-arm64-dts-broadcom-bcm4908-describe-firmware-partiti.patch b/target/linux/bcm4908/patches-5.4/032-v5.13-0005-arm64-dts-broadcom-bcm4908-describe-firmware-partiti.patch
deleted file mode 100644
index d03adc1743..0000000000
--- a/target/linux/bcm4908/patches-5.4/032-v5.13-0005-arm64-dts-broadcom-bcm4908-describe-firmware-partiti.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From cbaca2c467dc25a163107e14a53b7925214eab17 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 19 Feb 2021 06:50:30 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe firmware partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 bootloader supports multiple firmware partitions and has its own
-bindings defined for them.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts  |  1 +
- .../dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts  | 12 +++++++++++-
- 2 files changed, 12 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -135,6 +135,7 @@
- 		};
- 
- 		partition@100000 {
-+			compatible = "brcm,bcm4908-firmware";
- 			label = "firmware";
- 			reg = <0x100000 0x4400000>;
- 		};
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -122,7 +122,7 @@
- 	#size-cells = <0>;
- 
- 	partitions {
--		compatible = "fixed-partitions";
-+		compatible = "brcm,bcm4908-partitions";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 
-@@ -130,5 +130,15 @@
- 			label = "cferom";
- 			reg = <0x0 0x100000>;
- 		};
-+
-+		partition@100000 {
-+			compatible = "brcm,bcm4908-firmware";
-+			reg = <0x100000 0x5700000>;
-+		};
-+
-+		partition@5800000 {
-+			compatible = "brcm,bcm4908-firmware";
-+			reg = <0x5800000 0x5700000>;
-+		};
- 	};
- };
diff --git a/target/linux/bcm4908/patches-5.4/032-v5.13-0006-arm64-dts-broadcom-bcm4908-fix-switch-parent-node-na.patch b/target/linux/bcm4908/patches-5.4/032-v5.13-0006-arm64-dts-broadcom-bcm4908-fix-switch-parent-node-na.patch
deleted file mode 100644
index 8b95fc2759..0000000000
--- a/target/linux/bcm4908/patches-5.4/032-v5.13-0006-arm64-dts-broadcom-bcm4908-fix-switch-parent-node-na.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From a348ff97ffb840b9d74b0e64b3e0e6002187d224 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 9 Mar 2021 19:44:09 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: fix switch parent node name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Ethernet switch and MDIO are grouped using "simple-bus". It's not
-allowed to use "ethernet-switch" node name as it isn't a switch. Replace
-it with "bus".
-
-Fixes: 527a3ac9bdf8 ("arm64: dts: broadcom: bcm4908: describe internal switch")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -156,7 +156,7 @@
- 			status = "disabled";
- 		};
- 
--		ethernet-switch@80000 {
-+		bus@80000 {
- 			compatible = "simple-bus";
- 			#size-cells = <1>;
- 			#address-cells = <1>;
diff --git a/target/linux/bcm4908/patches-5.4/032-v5.13-0007-dt-bindings-arm-bcm-document-TP-Link-Archer-C2300-bi.patch b/target/linux/bcm4908/patches-5.4/032-v5.13-0007-dt-bindings-arm-bcm-document-TP-Link-Archer-C2300-bi.patch
deleted file mode 100644
index 07d4121ef1..0000000000
--- a/target/linux/bcm4908/patches-5.4/032-v5.13-0007-dt-bindings-arm-bcm-document-TP-Link-Archer-C2300-bi.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From b3de2a12d1a61d90a4d86c9840acc7d05066137f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 10 Mar 2021 08:46:02 +0100
-Subject: [PATCH] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-One more BCM4906 based device.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-@@ -21,6 +21,7 @@ properties:
-         items:
-           - enum:
-               - netgear,r8000p
-+              - tplink,archer-c2300-v1
-           - const: brcm,bcm4906
-           - const: brcm,bcm4908
- 
diff --git a/target/linux/bcm4908/patches-5.4/032-v5.13-0008-arm64-dts-broadcom-bcm4908-add-TP-Link-Archer-C2300-.patch b/target/linux/bcm4908/patches-5.4/032-v5.13-0008-arm64-dts-broadcom-bcm4908-add-TP-Link-Archer-C2300-.patch
deleted file mode 100644
index 0dd7f2301f..0000000000
--- a/target/linux/bcm4908/patches-5.4/032-v5.13-0008-arm64-dts-broadcom-bcm4908-add-TP-Link-Archer-C2300-.patch
+++ /dev/null
@@ -1,212 +0,0 @@
-From 6a30934a5470a0ce7ea32b0c6b600accfae94b1a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 10 Mar 2021 08:46:03 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Archer C2300 V1 is a home router based on the BCM4906 (2 CPU cores). It
-has 512 MiB of RAM, NAND flash, USB 2.0 and USB 3.0 ports, 4 LAN ports,
-1 WAN port.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/Makefile |   1 +
- .../bcm4906-tplink-archer-c2300-v1.dts        | 182 ++++++++++++++++++
- 2 files changed, 183 insertions(+)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-@@ -1,3 +1,4 @@
- # SPDX-License-Identifier: GPL-2.0
- dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
-+dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb
- dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
-@@ -0,0 +1,182 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
-+
-+#include "bcm4906.dtsi"
-+
-+/ {
-+	compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908";
-+	model = "TP-Link Archer C2300 V1";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00 0x00 0x00 0x20000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led-power {
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-2ghz {
-+			function = "2ghz";
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-5ghz {
-+			function = "5ghz";
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-wan-amber {
-+			function = LED_FUNCTION_WAN;
-+			color = <LED_COLOR_ID_AMBER>;
-+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		led-wan-blue {
-+			function = LED_FUNCTION_WAN;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-lan {
-+			function = LED_FUNCTION_LAN;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-wps {
-+			function = LED_FUNCTION_WPS;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-usb2 {
-+			function = "usb2";
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-usb3 {
-+			function = "usbd3";
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-brightness {
-+			function = LED_FUNCTION_BACKLIGHT;
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-keys-polled {
-+		compatible = "gpio-keys-polled";
-+		poll-interval = <100>;
-+
-+		brightness {
-+			label = "LEDs";
-+			linux,code = <KEY_BRIGHTNESS_ZERO>;
-+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		wifi {
-+			label = "WiFi";
-+			linux,code = <KEY_RFKILL>;
-+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&usb_phy {
-+	brcm,ioc = <1>;
-+	status = "okay";
-+};
-+
-+&ehci {
-+	status = "okay";
-+};
-+
-+&ohci {
-+	status = "okay";
-+};
-+
-+&xhci {
-+	status = "okay";
-+};
-+
-+&ports {
-+	port@0 {
-+		label = "lan4";
-+	};
-+
-+	port@1 {
-+		label = "lan3";
-+	};
-+
-+	port@2 {
-+		label = "lan2";
-+	};
-+
-+	port@3 {
-+		label = "lan1";
-+	};
-+
-+	port@7 {
-+		reg = <7>;
-+		phy-mode = "internal";
-+		phy-handle = <&phy12>;
-+		label = "wan";
-+	};
-+};
-+
-+&nandcs {
-+	nand-ecc-strength = <4>;
-+	nand-ecc-step-size = <512>;
-+	nand-on-flash-bbt;
-+
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	partitions {
-+		compatible = "brcm,bcm4908-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			label = "cferom";
-+			reg = <0x0 0x100000>;
-+		};
-+
-+		partition@100000 {
-+			compatible = "brcm,bcm4908-firmware";
-+			reg = <0x100000 0x3900000>;
-+		};
-+
-+		partition@5800000 {
-+			compatible = "brcm,bcm4908-firmware";
-+			reg = <0x3a00000 0x3900000>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm4908/patches-5.4/032-v5.13-0009-arm64-dts-broadcom-bcm4908-set-Asus-GT-AC5300-port-7.patch b/target/linux/bcm4908/patches-5.4/032-v5.13-0009-arm64-dts-broadcom-bcm4908-set-Asus-GT-AC5300-port-7.patch
deleted file mode 100644
index 30def36c39..0000000000
--- a/target/linux/bcm4908/patches-5.4/032-v5.13-0009-arm64-dts-broadcom-bcm4908-set-Asus-GT-AC5300-port-7.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 5ccb9f9cf05bbd729430c6d6d30d40c96a15c56a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 12 Mar 2021 12:01:20 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY
- mode
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Port 7 is connected to the external BCM53134S switch using RGMII.
-
-Fixes: 527a3ac9bdf8 ("arm64: dts: broadcom: bcm4908: describe internal switch")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -82,6 +82,7 @@
- 	port@7 {
- 		label = "sw";
- 		reg = <7>;
-+		phy-mode = "rgmii";
- 
- 		fixed-link {
- 			speed = <1000>;
diff --git a/target/linux/bcm4908/patches-5.4/032-v5.13-0010-arm64-dts-broadcom-bcm4908-add-Ethernet-TX-irq.patch b/target/linux/bcm4908/patches-5.4/032-v5.13-0010-arm64-dts-broadcom-bcm4908-add-Ethernet-TX-irq.patch
deleted file mode 100644
index 9ba30b3a14..0000000000
--- a/target/linux/bcm4908/patches-5.4/032-v5.13-0010-arm64-dts-broadcom-bcm4908-add-Ethernet-TX-irq.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 5337af7918bedde9713cd223ce5df74b3d6c7d7a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 17 Mar 2021 09:16:31 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add Ethernet TX irq
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This hardware supports two interrupts, one per DMA channel (RX and TX).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -116,8 +116,9 @@
- 			compatible = "brcm,bcm4908-enet";
- 			reg = <0x2000 0x1000>;
- 
--			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
--			interrupt-names = "rx";
-+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "rx", "tx";
- 		};
- 
- 		usb_phy: usb-phy@c200 {
diff --git a/target/linux/bcm4908/patches-5.4/032-v5.13-0011-arm64-dts-broadcom-bcm4908-add-Ethernet-MAC-addr.patch b/target/linux/bcm4908/patches-5.4/032-v5.13-0011-arm64-dts-broadcom-bcm4908-add-Ethernet-MAC-addr.patch
deleted file mode 100644
index 67f30c8213..0000000000
--- a/target/linux/bcm4908/patches-5.4/032-v5.13-0011-arm64-dts-broadcom-bcm4908-add-Ethernet-MAC-addr.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 9f01f5cdb548352418b34ce77db02a560fe2913b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 29 Mar 2021 17:45:14 +0200
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add Ethernet MAC addr
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On most BCM4908 devices MAC address can be read from the bootloader
-binary section containing device settings. Use NVMEM to describe that.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../broadcom/bcm4908/bcm4906-netgear-r8000p.dts    | 14 ++++++++++++++
- .../broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts    | 14 ++++++++++++++
- 2 files changed, 28 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -74,6 +74,11 @@
- 	};
- };
- 
-+&enet {
-+	nvmem-cells = <&base_mac_addr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &usb_phy {
- 	brcm,ioc = <1>;
- 	status = "okay";
-@@ -130,8 +135,17 @@
- 		#size-cells = <1>;
- 
- 		partition@0 {
-+			compatible = "nvmem-cells";
- 			label = "cferom";
- 			reg = <0x0 0x100000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0 0x0 0x100000>;
-+
-+			base_mac_addr: mac@106a0 {
-+				reg = <0x106a0 0x6>;
-+			};
- 		};
- 
- 		partition@100000 {
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -44,6 +44,11 @@
- 	};
- };
- 
-+&enet {
-+	nvmem-cells = <&base_mac_addr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &usb_phy {
- 	brcm,ioc = <1>;
- 	status = "okay";
-@@ -128,8 +133,17 @@
- 		#size-cells = <1>;
- 
- 		partition@0 {
-+			compatible = "nvmem-cells";
- 			label = "cferom";
- 			reg = <0x0 0x100000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0 0x0 0x100000>;
-+
-+			base_mac_addr: mac@106a0 {
-+				reg = <0x106a0 0x6>;
-+			};
- 		};
- 
- 		partition@100000 {
diff --git a/target/linux/bcm4908/patches-5.4/033-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch b/target/linux/bcm4908/patches-5.4/033-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch
deleted file mode 100644
index 757b2c439d..0000000000
--- a/target/linux/bcm4908/patches-5.4/033-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From b660269cba748dfd07eb5551a88ff34d5ea0b86e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 16 Apr 2021 15:37:48 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Fix NAND nodes names
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches nand-controller.yaml requirements.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -306,7 +306,7 @@
- 			interrupt-names = "nand";
- 			status = "okay";
- 
--			nandcs: nandcs@0 {
-+			nandcs: nand@0 {
- 				compatible = "brcm,nandcs";
- 				reg = <0>;
- 			};
diff --git a/target/linux/bcm4908/patches-5.4/034-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch b/target/linux/bcm4908/patches-5.4/034-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch
deleted file mode 100644
index 80ce766751..0000000000
--- a/target/linux/bcm4908/patches-5.4/034-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From d0ae9c944b9472c5691a482297df7a57d7fd1199 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 19 Aug 2021 14:11:08 +0200
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: Fix NAND node name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches nand-controller.yaml requirements.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -296,7 +296,7 @@
- 			status = "okay";
- 		};
- 
--		nand@1800 {
-+		nand-controller@1800 {
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
diff --git a/target/linux/bcm4908/patches-5.4/034-v5.16-0002-arm64-dts-broadcom-bcm4908-Move-reboot-syscon-out-of.patch b/target/linux/bcm4908/patches-5.4/034-v5.16-0002-arm64-dts-broadcom-bcm4908-Move-reboot-syscon-out-of.patch
deleted file mode 100644
index 6ac618a768..0000000000
--- a/target/linux/bcm4908/patches-5.4/034-v5.16-0002-arm64-dts-broadcom-bcm4908-Move-reboot-syscon-out-of.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 6cf9f70255b90b540b9cbde062f18fea29024a75 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 19 Aug 2021 14:26:06 +0200
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: Move reboot syscon out of bus
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes following error for every bcm4908 DTS file:
-bus@ff800000: reboot: {'type': 'object'} is not allowed for {'compatible': ['syscon-reboot'], 'regmap': [[15]], 'offset': [[52]], 'mask': [[1]]}
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -326,12 +326,12 @@
- 				#reset-cells = <1>;
- 			};
- 		};
-+	};
- 
--		reboot {
--			compatible = "syscon-reboot";
--			regmap = <&timer>;
--			offset = <0x34>;
--			mask = <1>;
--		};
-+	reboot {
-+		compatible = "syscon-reboot";
-+		regmap = <&timer>;
-+		offset = <0x34>;
-+		mask = <1>;
- 	};
- };
diff --git a/target/linux/bcm4908/patches-5.4/034-v5.16-0003-arm64-dts-broadcom-bcm4908-Fix-UART-clock-name.patch b/target/linux/bcm4908/patches-5.4/034-v5.16-0003-arm64-dts-broadcom-bcm4908-Fix-UART-clock-name.patch
deleted file mode 100644
index af9441875c..0000000000
--- a/target/linux/bcm4908/patches-5.4/034-v5.16-0003-arm64-dts-broadcom-bcm4908-Fix-UART-clock-name.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 6c38c39ab2141f53786d73e706675e8819a3f2cb Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 19 Aug 2021 17:37:02 +0200
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: Fix UART clock name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-According to the binding the correct clock name is "refclk".
-
-Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -292,7 +292,7 @@
- 			reg = <0x640 0x18>;
- 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&periph_clk>;
--			clock-names = "periph";
-+			clock-names = "refclk";
- 			status = "okay";
- 		};
- 
diff --git a/target/linux/bcm4908/patches-5.4/035-v5.17-0001-dt-bindings-arm-bcm-document-Netgear-RAXE500-binding.patch b/target/linux/bcm4908/patches-5.4/035-v5.17-0001-dt-bindings-arm-bcm-document-Netgear-RAXE500-binding.patch
deleted file mode 100644
index 4d5ffcb9e3..0000000000
--- a/target/linux/bcm4908/patches-5.4/035-v5.17-0001-dt-bindings-arm-bcm-document-Netgear-RAXE500-binding.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 7b0c9ca7f18e8d2e2cf3c342d91f037d436777bf Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 5 Nov 2021 11:14:12 +0100
-Subject: [PATCH] dt-bindings: arm: bcm: document Netgear RAXE500 binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-One more BCM4908 based device.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-@@ -29,6 +29,7 @@ properties:
-         items:
-           - enum:
-               - asus,gt-ac5300
-+              - netgear,raxe500
-           - const: brcm,bcm4908
- 
-       - description: BCM49408 based boards
diff --git a/target/linux/bcm4908/patches-5.4/035-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch b/target/linux/bcm4908/patches-5.4/035-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch
deleted file mode 100644
index 9e0236ad0f..0000000000
--- a/target/linux/bcm4908/patches-5.4/035-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From d0e68d354f345873e15876a7b35be1baaf5e3ec9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 5 Nov 2021 11:14:13 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add DT for Netgear RAXE500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's a home router based on BCM4908 SoC. It has: 1 GiB of RAM, 512 MiB
-NAND flash, 6 Ethernet ports and 3 x BCM43684 (WiFi). One of Ethernet
-ports is "2.5 G Multi-Gig port" that isn't described yet (it isn't known
-how it's wired up).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/Makefile |  1 +
- .../bcm4908/bcm4908-netgear-raxe500.dts       | 50 +++++++++++++++++++
- 2 files changed, 51 insertions(+)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-@@ -2,3 +2,4 @@
- dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
- dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb
- dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
-+dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
-@@ -0,0 +1,50 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include "bcm4908.dtsi"
-+
-+/ {
-+	compatible = "netgear,raxe500", "brcm,bcm4908";
-+	model = "Netgear RAXE500";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00 0x00 0x00 0x40000000>;
-+	};
-+};
-+
-+&ehci {
-+	status = "okay";
-+};
-+
-+&ohci {
-+	status = "okay";
-+};
-+
-+&xhci {
-+	status = "okay";
-+};
-+
-+&ports {
-+	port@0 {
-+		label = "lan4";
-+	};
-+
-+	port@1 {
-+		label = "lan3";
-+	};
-+
-+	port@2 {
-+		label = "lan2";
-+	};
-+
-+	port@3 {
-+		label = "lan1";
-+	};
-+
-+	port@7 {
-+		reg = <7>;
-+		phy-mode = "internal";
-+		phy-handle = <&phy12>;
-+		label = "wan";
-+	};
-+};
diff --git a/target/linux/bcm4908/patches-5.4/036-v5.18-0001-arm64-dts-broadcom-bcm4908-use-proper-TWD-binding.patch b/target/linux/bcm4908/patches-5.4/036-v5.18-0001-arm64-dts-broadcom-bcm4908-use-proper-TWD-binding.patch
deleted file mode 100644
index 420f790fdd..0000000000
--- a/target/linux/bcm4908/patches-5.4/036-v5.18-0001-arm64-dts-broadcom-bcm4908-use-proper-TWD-binding.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 33826e9c6ba76b265d4e26cb95493fa27ed78974 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 29 Dec 2021 11:23:14 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: use proper TWD binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Block at <ff800400 0x4c> is a TWD that contains timers, watchdog and
-reset. Actual timers happen to be at block beginning but they only span
-across the first 0x28 registers. It means the old block description was
-incorrect (size 0x3c).
-
-Drop timers binding for now and use documented TWD binding. Timers
-should be properly documented and defined as TWD subnode.
-
-Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -273,9 +273,9 @@
- 		#size-cells = <1>;
- 		ranges = <0x00 0x00 0xff800000 0x3000>;
- 
--		timer: timer@400 {
--			compatible = "brcm,bcm6328-timer", "syscon";
--			reg = <0x400 0x3c>;
-+		twd: timer-mfd@400 {
-+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
-+			reg = <0x400 0x4c>;
- 		};
- 
- 		gpio0: gpio-controller@500 {
-@@ -330,7 +330,7 @@
- 
- 	reboot {
- 		compatible = "syscon-reboot";
--		regmap = <&timer>;
-+		regmap = <&twd>;
- 		offset = <0x34>;
- 		mask = <1>;
- 	};
diff --git a/target/linux/bcm4908/patches-5.4/036-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch b/target/linux/bcm4908/patches-5.4/036-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch
deleted file mode 100644
index 2f4baf80c6..0000000000
--- a/target/linux/bcm4908/patches-5.4/036-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch
+++ /dev/null
@@ -1,160 +0,0 @@
-From 72b1c5da796ec5266f2012c36470e226cb4f09c9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 30 Dec 2021 12:05:35 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add pinctrl binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Describe pinmux block with its maps.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi    | 135 ++++++++++++++++++
- 1 file changed, 135 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -287,6 +287,141 @@
- 			gpio-controller;
- 		};
- 
-+		pinctrl@560 {
-+			compatible = "brcm,bcm4908-pinctrl";
-+			reg = <0x560 0x10>;
-+
-+			pins_led_0_a: led_0-a-pins {
-+				function = "led_0";
-+				groups = "led_0_grp_a";
-+			};
-+
-+			pins_led_1_a: led_1-a-pins {
-+				function = "led_1";
-+				groups = "led_1_grp_a";
-+			};
-+
-+			pins_led_2_a: led_2-a-pins {
-+				function = "led_2";
-+				groups = "led_2_grp_a";
-+			};
-+
-+			pins_led_3_a: led_3-a-pins {
-+				function = "led_3";
-+				groups = "led_3_grp_a";
-+			};
-+
-+			pins_led_4_a: led_4-a-pins {
-+				function = "led_4";
-+				groups = "led_4_grp_a";
-+			};
-+
-+			pins_led_5_a: led_5-a-pins {
-+				function = "led_5";
-+				groups = "led_5_grp_a";
-+			};
-+
-+			pins_led_6_a: led_6-a-pins {
-+				function = "led_6";
-+				groups = "led_6_grp_a";
-+			};
-+
-+			pins_led_7_a: led_7-a-pins {
-+				function = "led_7";
-+				groups = "led_7_grp_a";
-+			};
-+
-+			pins_led_8_a: led_8-a-pins {
-+				function = "led_8";
-+				groups = "led_8_grp_a";
-+			};
-+
-+			pins_led_9_a: led_9-a-pins {
-+				function = "led_9";
-+				groups = "led_9_grp_a";
-+			};
-+
-+			pins_led_21_a: led_21-a-pins {
-+				function = "led_21";
-+				groups = "led_21_grp_a";
-+			};
-+
-+			pins_led_22_a: led_22-a-pins {
-+				function = "led_22";
-+				groups = "led_22_grp_a";
-+			};
-+
-+			pins_led_26_a: led_26-a-pins {
-+				function = "led_26";
-+				groups = "led_26_grp_a";
-+			};
-+
-+			pins_led_27_a: led_27-a-pins {
-+				function = "led_27";
-+				groups = "led_27_grp_a";
-+			};
-+
-+			pins_led_28_a: led_28-a-pins {
-+				function = "led_28";
-+				groups = "led_28_grp_a";
-+			};
-+
-+			pins_led_29_a: led_29-a-pins {
-+				function = "led_29";
-+				groups = "led_29_grp_a";
-+			};
-+
-+			pins_led_30_a: led_30-a-pins {
-+				function = "led_30";
-+				groups = "led_30_grp_a";
-+			};
-+
-+			pins_hs_uart: hs_uart-pins {
-+				function = "hs_uart";
-+				groups = "hs_uart_grp";
-+			};
-+
-+			pins_i2c_a: i2c-a-pins {
-+				function = "i2c";
-+				groups = "i2c_grp_a";
-+			};
-+
-+			pins_i2c_b: i2c-b-pins {
-+				function = "i2c";
-+				groups = "i2c_grp_b";
-+			};
-+
-+			pins_i2s: i2s-pins {
-+				function = "i2s";
-+				groups = "i2s_grp";
-+			};
-+
-+			pins_nand_ctrl: nand_ctrl-pins {
-+				function = "nand_ctrl";
-+				groups = "nand_ctrl_grp";
-+			};
-+
-+			pins_nand_data: nand_data-pins {
-+				function = "nand_data";
-+				groups = "nand_data_grp";
-+			};
-+
-+			pins_emmc_ctrl: emmc_ctrl-pins {
-+				function = "emmc_ctrl";
-+				groups = "emmc_ctrl_grp";
-+			};
-+
-+			pins_usb0_pwr: usb0_pwr-pins {
-+				function = "usb0_pwr";
-+				groups = "usb0_pwr_grp";
-+			};
-+
-+			pins_usb1_pwr: usb1_pwr-pins {
-+				function = "usb1_pwr";
-+				groups = "usb1_pwr_grp";
-+			};
-+		};
-+
- 		uart0: serial@640 {
- 			compatible = "brcm,bcm6345-uart";
- 			reg = <0x640 0x18>;
diff --git a/target/linux/bcm4908/patches-5.4/036-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch b/target/linux/bcm4908/patches-5.4/036-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch
deleted file mode 100644
index 3ca778dcd8..0000000000
--- a/target/linux/bcm4908/patches-5.4/036-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 47513f6dd93b5b7d91143219c2c1fb883664ed13 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 9 Feb 2022 21:14:17 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add watchdog block
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 has the same watchdog as BCM63xx devices. Use "brcm,bcm6345-wdt"
-binding which matches the first SoC with that block.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -276,6 +276,15 @@
- 		twd: timer-mfd@400 {
- 			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
- 			reg = <0x400 0x4c>;
-+			ranges = <0x0 0x400 0x4c>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			watchdog@28 {
-+				compatible = "brcm,bcm6345-wdt";
-+				reg = <0x28 0x8>;
-+			};
- 		};
- 
- 		gpio0: gpio-controller@500 {
diff --git a/target/linux/bcm4908/patches-5.4/036-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch b/target/linux/bcm4908/patches-5.4/036-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch
deleted file mode 100644
index ab00f44b14..0000000000
--- a/target/linux/bcm4908/patches-5.4/036-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From ba5dfa2fd8d0aed4e4b6f650ba9e8ea7cdd6ead1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 15 Feb 2022 07:36:39 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add I2C block
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 uses the same I2C hw as BCM63xx / BCM67xx / BCM68xx SoCs.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -456,6 +456,15 @@
- 			};
- 		};
- 
-+		i2c@2100 {
-+			compatible = "brcm,brcmper-i2c";
-+			reg = <0x2100 0x58>;
-+			clock-frequency = <97500>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pins_i2c_a>;
-+			status = "disabled";
-+		};
-+
- 		misc@2600 {
- 			compatible = "brcm,misc", "simple-mfd";
- 			reg = <0x2600 0xe4>;
diff --git a/target/linux/bcm4908/patches-5.4/070-v5.10-0001-net-dsa-b53-Use-dev_-err-info-instead-of-pr_.patch b/target/linux/bcm4908/patches-5.4/070-v5.10-0001-net-dsa-b53-Use-dev_-err-info-instead-of-pr_.patch
deleted file mode 100644
index be09ab9e7d..0000000000
--- a/target/linux/bcm4908/patches-5.4/070-v5.10-0001-net-dsa-b53-Use-dev_-err-info-instead-of-pr_.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 3b33438c52def0de4a5577ad541e50923bcc2596 Mon Sep 17 00:00:00 2001
-From: Paul Barker <pbarker@konsulko.com>
-Date: Thu, 3 Sep 2020 12:26:20 +0100
-Subject: [PATCH] net: dsa: b53: Use dev_{err,info} instead of pr_*
-
-This change allows us to see which device the err or info messages are
-referring to if we have multiple b53 compatible devices on a board.
-
-As this removes the only pr_*() calls in this file we can drop the
-definition of pr_fmt().
-
-Signed-off-by: Paul Barker <pbarker@konsulko.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/b53_common.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -17,8 +17,6 @@
-  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-  */
- 
--#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
--
- #include <linux/delay.h>
- #include <linux/export.h>
- #include <linux/gpio.h>
-@@ -2475,8 +2473,9 @@ int b53_switch_detect(struct b53_device
- 			dev->chip_id = id32;
- 			break;
- 		default:
--			pr_err("unsupported switch detected (BCM53%02x/BCM%x)\n",
--			       id8, id32);
-+			dev_err(dev->dev,
-+				"unsupported switch detected (BCM53%02x/BCM%x)\n",
-+				id8, id32);
- 			return -ENODEV;
- 		}
- 	}
-@@ -2506,7 +2505,8 @@ int b53_switch_register(struct b53_devic
- 	if (ret)
- 		return ret;
- 
--	pr_info("found switch: %s, rev %i\n", dev->name, dev->core_rev);
-+	dev_info(dev->dev, "found switch: %s, rev %i\n",
-+		 dev->name, dev->core_rev);
- 
- 	return dsa_register_switch(dev->ds);
- }
diff --git a/target/linux/bcm4908/patches-5.4/070-v5.10-0002-net-dsa-b53-Print-err-message-on-SW_RST-timeout.patch b/target/linux/bcm4908/patches-5.4/070-v5.10-0002-net-dsa-b53-Print-err-message-on-SW_RST-timeout.patch
deleted file mode 100644
index 2661b0918e..0000000000
--- a/target/linux/bcm4908/patches-5.4/070-v5.10-0002-net-dsa-b53-Print-err-message-on-SW_RST-timeout.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 434d2312cd8057aa6972f2b39aa0b359d02af9f4 Mon Sep 17 00:00:00 2001
-From: Paul Barker <pbarker@konsulko.com>
-Date: Thu, 3 Sep 2020 12:26:21 +0100
-Subject: [PATCH] net: dsa: b53: Print err message on SW_RST timeout
-
-This allows us to differentiate between the possible failure modes of
-b53_switch_reset() by looking at the dmesg output.
-
-Signed-off-by: Paul Barker <pbarker@konsulko.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/b53_common.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -755,8 +755,11 @@ static int b53_switch_reset(struct b53_d
- 			usleep_range(1000, 2000);
- 		} while (timeout-- > 0);
- 
--		if (timeout == 0)
-+		if (timeout == 0) {
-+			dev_err(dev->dev,
-+				"Timeout waiting for SW_RST to clear!\n");
- 			return -ETIMEDOUT;
-+		}
- 	}
- 
- 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
diff --git a/target/linux/bcm4908/patches-5.4/071-v5.12-0001-net-dsa-bcm_sf2-support-BCM4908-s-integrated-switch.patch b/target/linux/bcm4908/patches-5.4/071-v5.12-0001-net-dsa-bcm_sf2-support-BCM4908-s-integrated-switch.patch
deleted file mode 100644
index a75898bf0c..0000000000
--- a/target/linux/bcm4908/patches-5.4/071-v5.12-0001-net-dsa-bcm_sf2-support-BCM4908-s-integrated-switch.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From 73b7a6047971aa6ce4a70fc4901964d14f077171 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 6 Jan 2021 22:32:02 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: support BCM4908's integrated switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 family SoCs come with integrated Starfighter 2 switch. Its
-registers layout it a mix of BCM7278 and BCM7445. It has 5 integrated
-PHYs and 8 ports. It also supports RGMII and SerDes.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20210106213202.17459-3-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/b53/b53_common.c | 14 +++++++++++++
- drivers/net/dsa/b53/b53_priv.h   |  1 +
- drivers/net/dsa/bcm_sf2.c        | 36 +++++++++++++++++++++++++++++---
- drivers/net/dsa/bcm_sf2_regs.h   |  1 +
- 4 files changed, 49 insertions(+), 3 deletions(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -2271,6 +2271,22 @@ static const struct b53_chip_data b53_sw
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
- 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
- 	},
-+	/* Starfighter 2 */
-+	{
-+		.chip_id = BCM4908_DEVICE_ID,
-+		.dev_name = "BCM4908",
-+		.vlans = 4096,
-+		.enabled_ports = 0x1bf,
-+#if 0
-+		.arl_bins = 4,
-+		.arl_buckets = 256,
-+#endif
-+		.cpu_port = 8, /* TODO: ports 4, 5, 8 */
-+		.vta_regs = B53_VTA_REGS,
-+		.duplex_reg = B53_DUPLEX_STAT_GE,
-+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
-+	},
- 	{
- 		.chip_id = BCM7445_DEVICE_ID,
- 		.dev_name = "BCM7445",
---- a/drivers/net/dsa/b53/b53_priv.h
-+++ b/drivers/net/dsa/b53/b53_priv.h
-@@ -64,6 +64,7 @@ struct b53_io_ops {
- #define B53_INVALID_LANE	0xff
- 
- enum {
-+	BCM4908_DEVICE_ID = 0x4908,
- 	BCM5325_DEVICE_ID = 0x25,
- 	BCM5365_DEVICE_ID = 0x65,
- 	BCM5389_DEVICE_ID = 0x89,
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -61,7 +61,8 @@ static void bcm_sf2_imp_setup(struct dsa
- 	b53_brcm_hdr_setup(ds, port);
- 
- 	if (port == 8) {
--		if (priv->type == BCM7445_DEVICE_ID)
-+		if (priv->type == BCM4908_DEVICE_ID ||
-+		    priv->type == BCM7445_DEVICE_ID)
- 			offset = CORE_STS_OVERRIDE_IMP;
- 		else
- 			offset = CORE_STS_OVERRIDE_IMP2;
-@@ -543,7 +544,8 @@ static void bcm_sf2_sw_mac_config(struct
- 	if (port == core_readl(priv, CORE_IMP0_PRT_ID))
- 		return;
- 
--	if (priv->type == BCM7445_DEVICE_ID)
-+	if (priv->type == BCM4908_DEVICE_ID ||
-+	    priv->type == BCM7445_DEVICE_ID)
- 		offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
- 	else
- 		offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
-@@ -985,6 +987,30 @@ struct bcm_sf2_of_data {
- 	unsigned int num_cfp_rules;
- };
- 
-+static const u16 bcm_sf2_4908_reg_offsets[] = {
-+	[REG_SWITCH_CNTRL]	= 0x00,
-+	[REG_SWITCH_STATUS]	= 0x04,
-+	[REG_DIR_DATA_WRITE]	= 0x08,
-+	[REG_DIR_DATA_READ]	= 0x0c,
-+	[REG_SWITCH_REVISION]	= 0x10,
-+	[REG_PHY_REVISION]	= 0x14,
-+	[REG_SPHY_CNTRL]	= 0x24,
-+	[REG_CROSSBAR]		= 0xc8,
-+	[REG_RGMII_0_CNTRL]	= 0xe0,
-+	[REG_RGMII_1_CNTRL]	= 0xec,
-+	[REG_RGMII_2_CNTRL]	= 0xf8,
-+	[REG_LED_0_CNTRL]	= 0x40,
-+	[REG_LED_1_CNTRL]	= 0x4c,
-+	[REG_LED_2_CNTRL]	= 0x58,
-+};
-+
-+static const struct bcm_sf2_of_data bcm_sf2_4908_data = {
-+	.type		= BCM4908_DEVICE_ID,
-+	.core_reg_align	= 0,
-+	.reg_offsets	= bcm_sf2_4908_reg_offsets,
-+	.num_cfp_rules	= 0, /* FIXME */
-+};
-+
- /* Register offsets for the SWITCH_REG_* block */
- static const u16 bcm_sf2_7445_reg_offsets[] = {
- 	[REG_SWITCH_CNTRL]	= 0x00,
-@@ -1033,6 +1059,9 @@ static const struct bcm_sf2_of_data bcm_
- };
- 
- static const struct of_device_id bcm_sf2_of_match[] = {
-+	{ .compatible = "brcm,bcm4908-switch",
-+	  .data = &bcm_sf2_4908_data
-+	},
- 	{ .compatible = "brcm,bcm7445-switch-v4.0",
- 	  .data = &bcm_sf2_7445_data
- 	},
---- a/drivers/net/dsa/bcm_sf2_regs.h
-+++ b/drivers/net/dsa/bcm_sf2_regs.h
-@@ -17,6 +17,7 @@ enum bcm_sf2_reg_offs {
- 	REG_SWITCH_REVISION,
- 	REG_PHY_REVISION,
- 	REG_SPHY_CNTRL,
-+	REG_CROSSBAR,
- 	REG_RGMII_0_CNTRL,
- 	REG_RGMII_1_CNTRL,
- 	REG_RGMII_2_CNTRL,
diff --git a/target/linux/bcm4908/patches-5.4/071-v5.12-0002-net-dsa-bcm_sf2-use-2-Gbps-IMP-port-link-on-BCM4908.patch b/target/linux/bcm4908/patches-5.4/071-v5.12-0002-net-dsa-bcm_sf2-use-2-Gbps-IMP-port-link-on-BCM4908.patch
deleted file mode 100644
index 2ab34c1261..0000000000
--- a/target/linux/bcm4908/patches-5.4/071-v5.12-0002-net-dsa-bcm_sf2-use-2-Gbps-IMP-port-link-on-BCM4908.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 8373a0fe9c7160a55482effa8a3f725efd3f8434 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 10 Mar 2021 13:51:59 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: use 2 Gbps IMP port link on BCM4908
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 uses 2 Gbps link between switch and the Ethernet interface.
-Without this BCM4908 devices were able to achieve only 2 x ~895 Mb/s.
-This allows handling e.g. NAT traffic with 940 Mb/s.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/bcm_sf2.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -70,7 +70,10 @@ static void bcm_sf2_imp_setup(struct dsa
- 		/* Force link status for IMP port */
- 		reg = core_readl(priv, offset);
- 		reg |= (MII_SW_OR | LINK_STS);
--		reg &= ~GMII_SPEED_UP_2G;
-+		if (priv->type == BCM4908_DEVICE_ID)
-+			reg |= GMII_SPEED_UP_2G;
-+		else
-+			reg &= ~GMII_SPEED_UP_2G;
- 		core_writel(priv, reg, offset);
- 
- 		/* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
diff --git a/target/linux/bcm4908/patches-5.4/072-v5.12-0001-dt-bindings-net-document-BCM4908-Ethernet-controller.patch b/target/linux/bcm4908/patches-5.4/072-v5.12-0001-dt-bindings-net-document-BCM4908-Ethernet-controller.patch
deleted file mode 100644
index 8c60b9706e..0000000000
--- a/target/linux/bcm4908/patches-5.4/072-v5.12-0001-dt-bindings-net-document-BCM4908-Ethernet-controller.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 387d1c1819790aa8398c7cffab587f9a050a0d1a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 7 Feb 2021 23:26:31 +0100
-Subject: [PATCH] dt-bindings: net: document BCM4908 Ethernet controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 is a family of SoCs with integrated Ethernet controller.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- .../bindings/net/brcm,bcm4908enet.yaml        | 45 +++++++++++++++++++
- 1 file changed, 45 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/net/brcm,bcm4908enet.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/brcm,bcm4908enet.yaml
-@@ -0,0 +1,45 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/net/brcm,bcm4908enet.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom BCM4908 Ethernet controller
-+
-+description: Broadcom's Ethernet controller integrated into BCM4908 family SoCs
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  compatible:
-+    const: brcm,bcm4908enet
-+
-+  reg:
-+    maxItems: 1
-+
-+  interrupts:
-+    description: RX interrupt
-+
-+  interrupt-names:
-+    const: rx
-+
-+required:
-+  - reg
-+  - interrupts
-+  - interrupt-names
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    #include <dt-bindings/interrupt-controller/irq.h>
-+    #include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+    ethernet@80002000 {
-+        compatible = "brcm,bcm4908enet";
-+        reg = <0x80002000 0x1000>;
-+
-+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+        interrupt-names = "rx";
-+    };
diff --git a/target/linux/bcm4908/patches-5.4/072-v5.12-0002-net-broadcom-bcm4908enet-add-BCM4908-controller-driv.patch b/target/linux/bcm4908/patches-5.4/072-v5.12-0002-net-broadcom-bcm4908enet-add-BCM4908-controller-driv.patch
deleted file mode 100644
index 3f6444e6b3..0000000000
--- a/target/linux/bcm4908/patches-5.4/072-v5.12-0002-net-broadcom-bcm4908enet-add-BCM4908-controller-driv.patch
+++ /dev/null
@@ -1,847 +0,0 @@
-From 4feffeadbcb2e5b11cbbf191a33c245b74a5837b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 7 Feb 2021 23:26:32 +0100
-Subject: [PATCH] net: broadcom: bcm4908enet: add BCM4908 controller driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 SoCs family uses Ethernel controller that includes UniMAC but
-uses different DMA engine (than other controllers) and requires
-different programming.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- MAINTAINERS                                 |   9 +
- drivers/net/ethernet/broadcom/Kconfig       |   8 +
- drivers/net/ethernet/broadcom/Makefile      |   1 +
- drivers/net/ethernet/broadcom/bcm4908enet.c | 676 ++++++++++++++++++++
- drivers/net/ethernet/broadcom/bcm4908enet.h |  96 +++
- 5 files changed, 790 insertions(+)
- create mode 100644 drivers/net/ethernet/broadcom/bcm4908enet.c
- create mode 100644 drivers/net/ethernet/broadcom/bcm4908enet.h
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3208,6 +3208,15 @@ F:	Documentation/devicetree/bindings/mip
- F:	arch/mips/bcm47xx/*
- F:	arch/mips/include/asm/mach-bcm47xx/*
- 
-+BROADCOM BCM4908 ETHERNET DRIVER
-+M:	Rafał Miłecki <rafal@milecki.pl>
-+M:	bcm-kernel-feedback-list@broadcom.com
-+L:	netdev@vger.kernel.org
-+S:	Maintained
-+F:	Documentation/devicetree/bindings/net/brcm,bcm4908enet.yaml
-+F:	drivers/net/ethernet/broadcom/bcm4908enet.*
-+F:	drivers/net/ethernet/broadcom/unimac.h
-+
- BROADCOM BCM5301X ARM ARCHITECTURE
- M:	Hauke Mehrtens <hauke@hauke-m.de>
- M:	Rafał Miłecki <zajec5@gmail.com>
---- a/drivers/net/ethernet/broadcom/Kconfig
-+++ b/drivers/net/ethernet/broadcom/Kconfig
-@@ -51,6 +51,14 @@ config B44_PCI
- 	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
- 	default y
- 
-+config BCM4908ENET
-+	tristate "Broadcom BCM4908 internal mac support"
-+	depends on ARCH_BCM4908 || COMPILE_TEST
-+	default y
-+	help
-+	  This driver supports Ethernet controller integrated into Broadcom
-+	  BCM4908 family SoCs.
-+
- config BCM63XX_ENET
- 	tristate "Broadcom 63xx internal mac support"
- 	depends on BCM63XX
---- a/drivers/net/ethernet/broadcom/Makefile
-+++ b/drivers/net/ethernet/broadcom/Makefile
-@@ -4,6 +4,7 @@
- #
- 
- obj-$(CONFIG_B44) += b44.o
-+obj-$(CONFIG_BCM4908ENET) += bcm4908enet.o
- obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
- obj-$(CONFIG_BCMGENET) += genet/
- obj-$(CONFIG_BNX2) += bnx2.o
---- /dev/null
-+++ b/drivers/net/ethernet/broadcom/bcm4908enet.c
-@@ -0,0 +1,676 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/etherdevice.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+
-+#include "bcm4908enet.h"
-+#include "unimac.h"
-+
-+#define ENET_DMA_CH_RX_CFG			ENET_DMA_CH0_CFG
-+#define ENET_DMA_CH_TX_CFG			ENET_DMA_CH1_CFG
-+#define ENET_DMA_CH_RX_STATE_RAM		ENET_DMA_CH0_STATE_RAM
-+#define ENET_DMA_CH_TX_STATE_RAM		ENET_DMA_CH1_STATE_RAM
-+
-+#define ENET_TX_BDS_NUM				200
-+#define ENET_RX_BDS_NUM				200
-+#define ENET_RX_BDS_NUM_MAX			8192
-+
-+#define ENET_DMA_INT_DEFAULTS			(ENET_DMA_CH_CFG_INT_DONE | \
-+						 ENET_DMA_CH_CFG_INT_NO_DESC | \
-+						 ENET_DMA_CH_CFG_INT_BUFF_DONE)
-+#define ENET_DMA_MAX_BURST_LEN			8 /* in 64 bit words */
-+
-+#define ENET_MTU_MIN				60
-+#define ENET_MTU_MAX				1500 /* Is it possible to support 2044? */
-+#define ENET_MTU_MAX_EXTRA_SIZE			32 /* L2 */
-+
-+struct bcm4908enet_dma_ring_bd {
-+	__le32 ctl;
-+	__le32 addr;
-+} __packed;
-+
-+struct bcm4908enet_dma_ring_slot {
-+	struct sk_buff *skb;
-+	unsigned int len;
-+	dma_addr_t dma_addr;
-+};
-+
-+struct bcm4908enet_dma_ring {
-+	int is_tx;
-+	int read_idx;
-+	int write_idx;
-+	int length;
-+	u16 cfg_block;
-+	u16 st_ram_block;
-+
-+	union {
-+		void *cpu_addr;
-+		struct bcm4908enet_dma_ring_bd *buf_desc;
-+	};
-+	dma_addr_t dma_addr;
-+
-+	struct bcm4908enet_dma_ring_slot *slots;
-+};
-+
-+struct bcm4908enet {
-+	struct device *dev;
-+	struct net_device *netdev;
-+	struct napi_struct napi;
-+	void __iomem *base;
-+
-+	struct bcm4908enet_dma_ring tx_ring;
-+	struct bcm4908enet_dma_ring rx_ring;
-+};
-+
-+/***
-+ * R/W ops
-+ */
-+
-+static inline u32 enet_read(struct bcm4908enet *enet, u16 offset)
-+{
-+	return readl(enet->base + offset);
-+}
-+
-+static inline void enet_write(struct bcm4908enet *enet, u16 offset, u32 value)
-+{
-+	writel(value, enet->base + offset);
-+}
-+
-+static inline void enet_maskset(struct bcm4908enet *enet, u16 offset, u32 mask, u32 set)
-+{
-+	u32 val;
-+
-+	WARN_ON(set & ~mask);
-+
-+	val = enet_read(enet, offset);
-+	val = (val & ~mask) | (set & mask);
-+	enet_write(enet, offset, val);
-+}
-+
-+static inline void enet_set(struct bcm4908enet *enet, u16 offset, u32 set)
-+{
-+	enet_maskset(enet, offset, set, set);
-+}
-+
-+static inline u32 enet_umac_read(struct bcm4908enet *enet, u16 offset)
-+{
-+	return enet_read(enet, ENET_UNIMAC + offset);
-+}
-+
-+static inline void enet_umac_write(struct bcm4908enet *enet, u16 offset, u32 value)
-+{
-+	enet_write(enet, ENET_UNIMAC + offset, value);
-+}
-+
-+static inline void enet_umac_maskset(struct bcm4908enet *enet, u16 offset, u32 mask, u32 set)
-+{
-+	enet_maskset(enet, ENET_UNIMAC + offset, mask, set);
-+}
-+
-+static inline void enet_umac_set(struct bcm4908enet *enet, u16 offset, u32 set)
-+{
-+	enet_set(enet, ENET_UNIMAC + offset, set);
-+}
-+
-+/***
-+ * Helpers
-+ */
-+
-+static void bcm4908enet_intrs_on(struct bcm4908enet *enet)
-+{
-+	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, ENET_DMA_INT_DEFAULTS);
-+}
-+
-+static void bcm4908enet_intrs_off(struct bcm4908enet *enet)
-+{
-+	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, 0);
-+}
-+
-+static void bcm4908enet_intrs_ack(struct bcm4908enet *enet)
-+{
-+	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_STAT, ENET_DMA_INT_DEFAULTS);
-+}
-+
-+/***
-+ * DMA
-+ */
-+
-+static int bcm4908_dma_alloc_buf_descs(struct bcm4908enet *enet, struct bcm4908enet_dma_ring *ring)
-+{
-+	int size = ring->length * sizeof(struct bcm4908enet_dma_ring_bd);
-+	struct device *dev = enet->dev;
-+
-+	ring->cpu_addr = dma_alloc_coherent(dev, size, &ring->dma_addr, GFP_KERNEL);
-+	if (!ring->cpu_addr)
-+		return -ENOMEM;
-+
-+	if (((uintptr_t)ring->cpu_addr) & (0x40 - 1)) {
-+		dev_err(dev, "Invalid DMA ring alignment\n");
-+		goto err_free_buf_descs;
-+	}
-+
-+	ring->slots = kzalloc(ring->length * sizeof(*ring->slots), GFP_KERNEL);
-+	if (!ring->slots)
-+		goto err_free_buf_descs;
-+
-+	memset(ring->cpu_addr, 0, size);
-+
-+	ring->read_idx = 0;
-+	ring->write_idx = 0;
-+
-+	return 0;
-+
-+err_free_buf_descs:
-+	dma_free_coherent(dev, size, ring->cpu_addr, ring->dma_addr);
-+	return -ENOMEM;
-+}
-+
-+static void bcm4908enet_dma_free(struct bcm4908enet *enet)
-+{
-+	struct bcm4908enet_dma_ring *tx_ring = &enet->tx_ring;
-+	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct device *dev = enet->dev;
-+	int size;
-+
-+	size = rx_ring->length * sizeof(struct bcm4908enet_dma_ring_bd);
-+	if (rx_ring->cpu_addr)
-+		dma_free_coherent(dev, size, rx_ring->cpu_addr, rx_ring->dma_addr);
-+	kfree(rx_ring->slots);
-+
-+	size = tx_ring->length * sizeof(struct bcm4908enet_dma_ring_bd);
-+	if (tx_ring->cpu_addr)
-+		dma_free_coherent(dev, size, tx_ring->cpu_addr, tx_ring->dma_addr);
-+	kfree(tx_ring->slots);
-+}
-+
-+static int bcm4908enet_dma_alloc(struct bcm4908enet *enet)
-+{
-+	struct bcm4908enet_dma_ring *tx_ring = &enet->tx_ring;
-+	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct device *dev = enet->dev;
-+	int err;
-+
-+	tx_ring->length = ENET_TX_BDS_NUM;
-+	tx_ring->is_tx = 1;
-+	tx_ring->cfg_block = ENET_DMA_CH_TX_CFG;
-+	tx_ring->st_ram_block = ENET_DMA_CH_TX_STATE_RAM;
-+	err = bcm4908_dma_alloc_buf_descs(enet, tx_ring);
-+	if (err) {
-+		dev_err(dev, "Failed to alloc TX buf descriptors: %d\n", err);
-+		return err;
-+	}
-+
-+	rx_ring->length = ENET_RX_BDS_NUM;
-+	rx_ring->is_tx = 0;
-+	rx_ring->cfg_block = ENET_DMA_CH_RX_CFG;
-+	rx_ring->st_ram_block = ENET_DMA_CH_RX_STATE_RAM;
-+	err = bcm4908_dma_alloc_buf_descs(enet, rx_ring);
-+	if (err) {
-+		dev_err(dev, "Failed to alloc RX buf descriptors: %d\n", err);
-+		bcm4908enet_dma_free(enet);
-+		return err;
-+	}
-+
-+	return 0;
-+}
-+
-+static void bcm4908enet_dma_reset(struct bcm4908enet *enet)
-+{
-+	struct bcm4908enet_dma_ring *rings[] = { &enet->rx_ring, &enet->tx_ring };
-+	int i;
-+
-+	/* Disable the DMA controller and channel */
-+	for (i = 0; i < ARRAY_SIZE(rings); i++)
-+		enet_write(enet, rings[i]->cfg_block + ENET_DMA_CH_CFG, 0);
-+	enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN, 0);
-+
-+	/* Reset channels state */
-+	for (i = 0; i < ARRAY_SIZE(rings); i++) {
-+		struct bcm4908enet_dma_ring *ring = rings[i];
-+
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR, 0);
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_STATE_DATA, 0);
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS, 0);
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR, 0);
-+	}
-+}
-+
-+static int bcm4908enet_dma_alloc_rx_buf(struct bcm4908enet *enet, unsigned int idx)
-+{
-+	struct bcm4908enet_dma_ring_bd *buf_desc = &enet->rx_ring.buf_desc[idx];
-+	struct bcm4908enet_dma_ring_slot *slot = &enet->rx_ring.slots[idx];
-+	struct device *dev = enet->dev;
-+	u32 tmp;
-+	int err;
-+
-+	slot->len = ENET_MTU_MAX + ENET_MTU_MAX_EXTRA_SIZE;
-+
-+	slot->skb = netdev_alloc_skb(enet->netdev, slot->len);
-+	if (!slot->skb)
-+		return -ENOMEM;
-+
-+	slot->dma_addr = dma_map_single(dev, slot->skb->data, slot->len, DMA_FROM_DEVICE);
-+	err = dma_mapping_error(dev, slot->dma_addr);
-+	if (err) {
-+		dev_err(dev, "Failed to map DMA buffer: %d\n", err);
-+		kfree_skb(slot->skb);
-+		slot->skb = NULL;
-+		return err;
-+	}
-+
-+	tmp = slot->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+	tmp |= DMA_CTL_STATUS_OWN;
-+	if (idx == enet->rx_ring.length - 1)
-+		tmp |= DMA_CTL_STATUS_WRAP;
-+	buf_desc->ctl = cpu_to_le32(tmp);
-+	buf_desc->addr = cpu_to_le32(slot->dma_addr);
-+
-+	return 0;
-+}
-+
-+static void bcm4908enet_dma_ring_init(struct bcm4908enet *enet,
-+				      struct bcm4908enet_dma_ring *ring)
-+{
-+	int reset_channel = 0; /* We support only 1 main channel (with TX and RX) */
-+	int reset_subch = ring->is_tx ? 1 : 0;
-+
-+	/* Reset the DMA channel */
-+	enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, BIT(reset_channel * 2 + reset_subch));
-+	enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, 0);
-+
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_MAX_BURST, ENET_DMA_MAX_BURST_LEN);
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_INT_MASK, 0);
-+
-+	enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR,
-+		   (uint32_t)ring->dma_addr);
-+}
-+
-+static void bcm4908enet_dma_uninit(struct bcm4908enet *enet)
-+{
-+	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct bcm4908enet_dma_ring_slot *slot;
-+	struct device *dev = enet->dev;
-+	int i;
-+
-+	for (i = rx_ring->length - 1; i >= 0; i--) {
-+		slot = &rx_ring->slots[i];
-+		if (!slot->skb)
-+			continue;
-+		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_FROM_DEVICE);
-+		kfree_skb(slot->skb);
-+		slot->skb = NULL;
-+	}
-+}
-+
-+static int bcm4908enet_dma_init(struct bcm4908enet *enet)
-+{
-+	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct device *dev = enet->dev;
-+	int err;
-+	int i;
-+
-+	for (i = 0; i < rx_ring->length; i++) {
-+		err = bcm4908enet_dma_alloc_rx_buf(enet, i);
-+		if (err) {
-+			dev_err(dev, "Failed to alloc RX buffer: %d\n", err);
-+			bcm4908enet_dma_uninit(enet);
-+			return err;
-+		}
-+	}
-+
-+	bcm4908enet_dma_ring_init(enet, &enet->tx_ring);
-+	bcm4908enet_dma_ring_init(enet, &enet->rx_ring);
-+
-+	return 0;
-+}
-+
-+static void bcm4908enet_dma_tx_ring_ensable(struct bcm4908enet *enet,
-+					    struct bcm4908enet_dma_ring *ring)
-+{
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
-+}
-+
-+static void bcm4908enet_dma_tx_ring_disable(struct bcm4908enet *enet,
-+					    struct bcm4908enet_dma_ring *ring)
-+{
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
-+}
-+
-+static void bcm4908enet_dma_rx_ring_enable(struct bcm4908enet *enet,
-+					   struct bcm4908enet_dma_ring *ring)
-+{
-+	enet_set(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
-+}
-+
-+static void bcm4908enet_dma_rx_ring_disable(struct bcm4908enet *enet,
-+					    struct bcm4908enet_dma_ring *ring)
-+{
-+	unsigned long deadline;
-+	u32 tmp;
-+
-+	enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
-+
-+	deadline = jiffies + usecs_to_jiffies(2000);
-+	do {
-+		tmp = enet_read(enet, ring->cfg_block + ENET_DMA_CH_CFG);
-+		if (!(tmp & ENET_DMA_CH_CFG_ENABLE))
-+			return;
-+		enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
-+		usleep_range(10, 30);
-+	} while (!time_after_eq(jiffies, deadline));
-+
-+	dev_warn(enet->dev, "Timeout waiting for DMA TX stop\n");
-+}
-+
-+/***
-+ * Ethernet driver
-+ */
-+
-+static void bcm4908enet_gmac_init(struct bcm4908enet *enet)
-+{
-+	u32 cmd;
-+
-+	cmd = enet_umac_read(enet, UMAC_CMD);
-+	enet_umac_write(enet, UMAC_CMD, cmd | CMD_SW_RESET);
-+	enet_umac_write(enet, UMAC_CMD, cmd & ~CMD_SW_RESET);
-+
-+	enet_set(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH);
-+	enet_maskset(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH, 0);
-+
-+	enet_set(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB);
-+	enet_maskset(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB, 0);
-+
-+	cmd = enet_umac_read(enet, UMAC_CMD);
-+	cmd &= ~(CMD_SPEED_MASK << CMD_SPEED_SHIFT);
-+	cmd &= ~CMD_TX_EN;
-+	cmd &= ~CMD_RX_EN;
-+	cmd |= CMD_SPEED_1000 << CMD_SPEED_SHIFT;
-+	enet_umac_write(enet, UMAC_CMD, cmd);
-+
-+	enet_maskset(enet, ENET_GMAC_STATUS,
-+		     ENET_GMAC_STATUS_ETH_SPEED_MASK |
-+		     ENET_GMAC_STATUS_HD |
-+		     ENET_GMAC_STATUS_AUTO_CFG_EN |
-+		     ENET_GMAC_STATUS_LINK_UP,
-+		     ENET_GMAC_STATUS_ETH_SPEED_1000 |
-+		     ENET_GMAC_STATUS_AUTO_CFG_EN |
-+		     ENET_GMAC_STATUS_LINK_UP);
-+}
-+
-+static irqreturn_t bcm4908enet_irq_handler(int irq, void *dev_id)
-+{
-+	struct bcm4908enet *enet = dev_id;
-+
-+	bcm4908enet_intrs_off(enet);
-+	bcm4908enet_intrs_ack(enet);
-+
-+	napi_schedule(&enet->napi);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int bcm4908enet_open(struct net_device *netdev)
-+{
-+	struct bcm4908enet *enet = netdev_priv(netdev);
-+	struct device *dev = enet->dev;
-+	int err;
-+
-+	err = request_irq(netdev->irq, bcm4908enet_irq_handler, 0, "enet", enet);
-+	if (err) {
-+		dev_err(dev, "Failed to request IRQ %d: %d\n", netdev->irq, err);
-+		return err;
-+	}
-+
-+	bcm4908enet_gmac_init(enet);
-+	bcm4908enet_dma_reset(enet);
-+	bcm4908enet_dma_init(enet);
-+
-+	enet_umac_set(enet, UMAC_CMD, CMD_TX_EN | CMD_RX_EN);
-+
-+	enet_set(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN);
-+	enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_FLOWC_CH1_EN, 0);
-+	bcm4908enet_dma_rx_ring_enable(enet, &enet->rx_ring);
-+
-+	napi_enable(&enet->napi);
-+	netif_carrier_on(netdev);
-+	netif_start_queue(netdev);
-+
-+	bcm4908enet_intrs_ack(enet);
-+	bcm4908enet_intrs_on(enet);
-+
-+	return 0;
-+}
-+
-+static int bcm4908enet_stop(struct net_device *netdev)
-+{
-+	struct bcm4908enet *enet = netdev_priv(netdev);
-+
-+	netif_stop_queue(netdev);
-+	netif_carrier_off(netdev);
-+	napi_disable(&enet->napi);
-+
-+	bcm4908enet_dma_rx_ring_disable(enet, &enet->rx_ring);
-+	bcm4908enet_dma_tx_ring_disable(enet, &enet->tx_ring);
-+
-+	bcm4908enet_dma_uninit(enet);
-+
-+	free_irq(enet->netdev->irq, enet);
-+
-+	return 0;
-+}
-+
-+static int bcm4908enet_start_xmit(struct sk_buff *skb, struct net_device *netdev)
-+{
-+	struct bcm4908enet *enet = netdev_priv(netdev);
-+	struct bcm4908enet_dma_ring *ring = &enet->tx_ring;
-+	struct bcm4908enet_dma_ring_slot *slot;
-+	struct device *dev = enet->dev;
-+	struct bcm4908enet_dma_ring_bd *buf_desc;
-+	int free_buf_descs;
-+	u32 tmp;
-+
-+	/* Free transmitted skbs */
-+	while (ring->read_idx != ring->write_idx) {
-+		buf_desc = &ring->buf_desc[ring->read_idx];
-+		if (buf_desc->ctl & DMA_CTL_STATUS_OWN)
-+			break;
-+		slot = &ring->slots[ring->read_idx];
-+
-+		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
-+		dev_kfree_skb(slot->skb);
-+		if (++ring->read_idx == ring->length)
-+			ring->read_idx = 0;
-+	}
-+
-+	/* Don't use the last empty buf descriptor */
-+	if (ring->read_idx <= ring->write_idx)
-+		free_buf_descs = ring->read_idx - ring->write_idx + ring->length;
-+	else
-+		free_buf_descs = ring->read_idx - ring->write_idx;
-+	if (free_buf_descs < 2)
-+		return NETDEV_TX_BUSY;
-+
-+	/* Hardware removes OWN bit after sending data */
-+	buf_desc = &ring->buf_desc[ring->write_idx];
-+	if (unlikely(le32_to_cpu(buf_desc->ctl) & DMA_CTL_STATUS_OWN)) {
-+		netif_stop_queue(netdev);
-+		return NETDEV_TX_BUSY;
-+	}
-+
-+	slot = &ring->slots[ring->write_idx];
-+	slot->skb = skb;
-+	slot->len = skb->len;
-+	slot->dma_addr = dma_map_single(dev, skb->data, skb->len, DMA_TO_DEVICE);
-+	if (unlikely(dma_mapping_error(dev, slot->dma_addr)))
-+		return NETDEV_TX_BUSY;
-+
-+	tmp = skb->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+	tmp |= DMA_CTL_STATUS_OWN;
-+	tmp |= DMA_CTL_STATUS_SOP;
-+	tmp |= DMA_CTL_STATUS_EOP;
-+	tmp |= DMA_CTL_STATUS_APPEND_CRC;
-+	if (ring->write_idx + 1 == ring->length - 1)
-+		tmp |= DMA_CTL_STATUS_WRAP;
-+
-+	buf_desc->addr = cpu_to_le32((uint32_t)slot->dma_addr);
-+	buf_desc->ctl = cpu_to_le32(tmp);
-+
-+	bcm4908enet_dma_tx_ring_ensable(enet, &enet->tx_ring);
-+
-+	if (++ring->write_idx == ring->length - 1)
-+		ring->write_idx = 0;
-+	enet->netdev->stats.tx_bytes += skb->len;
-+	enet->netdev->stats.tx_packets++;
-+
-+	return NETDEV_TX_OK;
-+}
-+
-+static int bcm4908enet_poll(struct napi_struct *napi, int weight)
-+{
-+	struct bcm4908enet *enet = container_of(napi, struct bcm4908enet, napi);
-+	struct device *dev = enet->dev;
-+	int handled = 0;
-+
-+	while (handled < weight) {
-+		struct bcm4908enet_dma_ring_bd *buf_desc;
-+		struct bcm4908enet_dma_ring_slot slot;
-+		u32 ctl;
-+		int len;
-+		int err;
-+
-+		buf_desc = &enet->rx_ring.buf_desc[enet->rx_ring.read_idx];
-+		ctl = le32_to_cpu(buf_desc->ctl);
-+		if (ctl & DMA_CTL_STATUS_OWN)
-+			break;
-+
-+		slot = enet->rx_ring.slots[enet->rx_ring.read_idx];
-+
-+		/* Provide new buffer before unpinning the old one */
-+		err = bcm4908enet_dma_alloc_rx_buf(enet, enet->rx_ring.read_idx);
-+		if (err)
-+			break;
-+
-+		if (++enet->rx_ring.read_idx == enet->rx_ring.length)
-+			enet->rx_ring.read_idx = 0;
-+
-+		len = (ctl & DMA_CTL_LEN_DESC_BUFLENGTH) >> DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+
-+		if (len < ENET_MTU_MIN ||
-+		    (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) {
-+			enet->netdev->stats.rx_dropped++;
-+			break;
-+		}
-+
-+		dma_unmap_single(dev, slot.dma_addr, slot.len, DMA_FROM_DEVICE);
-+
-+		skb_put(slot.skb, len - 4 + 2);
-+		slot.skb->protocol = eth_type_trans(slot.skb, enet->netdev);
-+		netif_receive_skb(slot.skb);
-+
-+		enet->netdev->stats.rx_packets++;
-+		enet->netdev->stats.rx_bytes += len;
-+	}
-+
-+	if (handled < weight) {
-+		napi_complete_done(napi, handled);
-+		bcm4908enet_intrs_on(enet);
-+	}
-+
-+	return handled;
-+}
-+
-+static const struct net_device_ops bcm96xx_netdev_ops = {
-+	.ndo_open = bcm4908enet_open,
-+	.ndo_stop = bcm4908enet_stop,
-+	.ndo_start_xmit = bcm4908enet_start_xmit,
-+	.ndo_set_mac_address = eth_mac_addr,
-+};
-+
-+static int bcm4908enet_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct net_device *netdev;
-+	struct bcm4908enet *enet;
-+	int err;
-+
-+	netdev = devm_alloc_etherdev(dev, sizeof(*enet));
-+	if (!netdev)
-+		return -ENOMEM;
-+
-+	enet = netdev_priv(netdev);
-+	enet->dev = dev;
-+	enet->netdev = netdev;
-+
-+	enet->base = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(enet->base)) {
-+		dev_err(dev, "Failed to map registers: %ld\n", PTR_ERR(enet->base));
-+		return PTR_ERR(enet->base);
-+	}
-+
-+	netdev->irq = platform_get_irq_byname(pdev, "rx");
-+	if (netdev->irq < 0)
-+		return netdev->irq;
-+
-+	dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
-+
-+	err = bcm4908enet_dma_alloc(enet);
-+	if (err)
-+		return err;
-+
-+	SET_NETDEV_DEV(netdev, &pdev->dev);
-+	eth_hw_addr_random(netdev);
-+	netdev->netdev_ops = &bcm96xx_netdev_ops;
-+	netdev->min_mtu = ETH_ZLEN;
-+	netdev->mtu = ENET_MTU_MAX;
-+	netdev->max_mtu = ENET_MTU_MAX;
-+	netif_napi_add(netdev, &enet->napi, bcm4908enet_poll, 64);
-+
-+	err = register_netdev(netdev);
-+	if (err) {
-+		bcm4908enet_dma_free(enet);
-+		return err;
-+	}
-+
-+	platform_set_drvdata(pdev, enet);
-+
-+	return 0;
-+}
-+
-+static int bcm4908enet_remove(struct platform_device *pdev)
-+{
-+	struct bcm4908enet *enet = platform_get_drvdata(pdev);
-+
-+	unregister_netdev(enet->netdev);
-+	netif_napi_del(&enet->napi);
-+	bcm4908enet_dma_free(enet);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id bcm4908enet_of_match[] = {
-+	{ .compatible = "brcm,bcm4908enet"},
-+	{},
-+};
-+
-+static struct platform_driver bcm4908enet_driver = {
-+	.driver = {
-+		.name = "bcm4908enet",
-+		.of_match_table = bcm4908enet_of_match,
-+	},
-+	.probe	= bcm4908enet_probe,
-+	.remove = bcm4908enet_remove,
-+};
-+module_platform_driver(bcm4908enet_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DEVICE_TABLE(of, bcm4908enet_of_match);
---- /dev/null
-+++ b/drivers/net/ethernet/broadcom/bcm4908enet.h
-@@ -0,0 +1,96 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+#ifndef __BCM4908ENET_H
-+#define __BCM4908ENET_H
-+
-+#define ENET_CONTROL					0x000
-+#define ENET_MIB_CTRL					0x004
-+#define  ENET_MIB_CTRL_CLR_MIB				0x00000001
-+#define ENET_RX_ERR_MASK				0x008
-+#define ENET_MIB_MAX_PKT_SIZE				0x00C
-+#define  ENET_MIB_MAX_PKT_SIZE_VAL			0x00003fff
-+#define ENET_DIAG_OUT					0x01c
-+#define ENET_ENABLE_DROP_PKT				0x020
-+#define ENET_IRQ_ENABLE					0x024
-+#define  ENET_IRQ_ENABLE_OVFL				0x00000001
-+#define ENET_GMAC_STATUS				0x028
-+#define  ENET_GMAC_STATUS_ETH_SPEED_MASK		0x00000003
-+#define  ENET_GMAC_STATUS_ETH_SPEED_10			0x00000000
-+#define  ENET_GMAC_STATUS_ETH_SPEED_100			0x00000001
-+#define  ENET_GMAC_STATUS_ETH_SPEED_1000		0x00000002
-+#define  ENET_GMAC_STATUS_HD				0x00000004
-+#define  ENET_GMAC_STATUS_AUTO_CFG_EN			0x00000008
-+#define  ENET_GMAC_STATUS_LINK_UP			0x00000010
-+#define ENET_IRQ_STATUS					0x02c
-+#define  ENET_IRQ_STATUS_OVFL				0x00000001
-+#define ENET_OVERFLOW_COUNTER				0x030
-+#define ENET_FLUSH					0x034
-+#define  ENET_FLUSH_RXFIFO_FLUSH			0x00000001
-+#define  ENET_FLUSH_TXFIFO_FLUSH			0x00000002
-+#define ENET_RSV_SELECT					0x038
-+#define ENET_BP_FORCE					0x03c
-+#define  ENET_BP_FORCE_FORCE				0x00000001
-+#define ENET_DMA_RX_OK_TO_SEND_COUNT			0x040
-+#define  ENET_DMA_RX_OK_TO_SEND_COUNT_VAL		0x0000000f
-+#define ENET_TX_CRC_CTRL				0x044
-+#define ENET_MIB					0x200
-+#define ENET_UNIMAC					0x400
-+#define ENET_DMA					0x800
-+#define ENET_DMA_CONTROLLER_CFG				0x800
-+#define  ENET_DMA_CTRL_CFG_MASTER_EN			0x00000001
-+#define  ENET_DMA_CTRL_CFG_FLOWC_CH1_EN			0x00000002
-+#define  ENET_DMA_CTRL_CFG_FLOWC_CH3_EN			0x00000004
-+#define ENET_DMA_FLOWCTL_CH1_THRESH_LO			0x804
-+#define ENET_DMA_FLOWCTL_CH1_THRESH_HI			0x808
-+#define ENET_DMA_FLOWCTL_CH1_ALLOC			0x80c
-+#define  ENET_DMA_FLOWCTL_CH1_ALLOC_FORCE		0x80000000
-+#define ENET_DMA_FLOWCTL_CH3_THRESH_LO			0x810
-+#define ENET_DMA_FLOWCTL_CH3_THRESH_HI			0x814
-+#define ENET_DMA_FLOWCTL_CH3_ALLOC			0x818
-+#define ENET_DMA_FLOWCTL_CH5_THRESH_LO			0x81C
-+#define ENET_DMA_FLOWCTL_CH5_THRESH_HI			0x820
-+#define ENET_DMA_FLOWCTL_CH5_ALLOC			0x824
-+#define ENET_DMA_FLOWCTL_CH7_THRESH_LO			0x828
-+#define ENET_DMA_FLOWCTL_CH7_THRESH_HI			0x82C
-+#define ENET_DMA_FLOWCTL_CH7_ALLOC			0x830
-+#define ENET_DMA_CTRL_CHANNEL_RESET			0x834
-+#define ENET_DMA_CTRL_CHANNEL_DEBUG			0x838
-+#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_STATUS		0x840
-+#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_MASK		0x844
-+#define ENET_DMA_CH0_CFG				0xa00		/* RX */
-+#define ENET_DMA_CH1_CFG				0xa10		/* TX */
-+#define ENET_DMA_CH0_STATE_RAM				0xc00		/* RX */
-+#define ENET_DMA_CH1_STATE_RAM				0xc10		/* TX */
-+
-+#define ENET_DMA_CH_CFG					0x00		/* assorted configuration */
-+#define  ENET_DMA_CH_CFG_ENABLE				0x00000001	/* set to enable channel */
-+#define  ENET_DMA_CH_CFG_PKT_HALT			0x00000002	/* idle after an EOP flag is detected */
-+#define  ENET_DMA_CH_CFG_BURST_HALT			0x00000004	/* idle after finish current memory burst */
-+#define ENET_DMA_CH_CFG_INT_STAT			0x04		/* interrupts control and status */
-+#define ENET_DMA_CH_CFG_INT_MASK			0x08		/* interrupts mask */
-+#define  ENET_DMA_CH_CFG_INT_BUFF_DONE			0x00000001	/* buffer done */
-+#define  ENET_DMA_CH_CFG_INT_DONE			0x00000002	/* packet xfer complete */
-+#define  ENET_DMA_CH_CFG_INT_NO_DESC			0x00000004	/* no valid descriptors */
-+#define  ENET_DMA_CH_CFG_INT_RX_ERROR			0x00000008	/* rxdma detect client protocol error */
-+#define ENET_DMA_CH_CFG_MAX_BURST			0x0c		/* max burst length permitted */
-+#define  ENET_DMA_CH_CFG_MAX_BURST_DESCSIZE_SEL		0x00040000	/* DMA Descriptor Size Selection */
-+#define ENET_DMA_CH_CFG_SIZE				0x10
-+
-+#define ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR		0x00		/* descriptor ring start address */
-+#define ENET_DMA_CH_STATE_RAM_STATE_DATA		0x04		/* state/bytes done/ring offset */
-+#define ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS		0x08		/* buffer descriptor status and len */
-+#define ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR		0x0c		/* buffer descrpitor current processing */
-+#define ENET_DMA_CH_STATE_RAM_SIZE			0x10
-+
-+#define DMA_CTL_STATUS_APPEND_CRC			0x00000100
-+#define DMA_CTL_STATUS_APPEND_BRCM_TAG			0x00000200
-+#define DMA_CTL_STATUS_PRIO				0x00000C00  /* Prio for Tx */
-+#define DMA_CTL_STATUS_WRAP				0x00001000  /* */
-+#define DMA_CTL_STATUS_SOP				0x00002000  /* first buffer in packet */
-+#define DMA_CTL_STATUS_EOP				0x00004000  /* last buffer in packet */
-+#define DMA_CTL_STATUS_OWN				0x00008000  /* cleared by DMA, set by SW */
-+#define DMA_CTL_LEN_DESC_BUFLENGTH			0x0fff0000
-+#define DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT		16
-+#define DMA_CTL_LEN_DESC_MULTICAST			0x40000000
-+#define DMA_CTL_LEN_DESC_USEFPM				0x80000000
-+
-+#endif
diff --git a/target/linux/bcm4908/patches-5.4/073-v5.12-0001-dt-bindings-net-rename-BCM4908-Ethernet-binding.patch b/target/linux/bcm4908/patches-5.4/073-v5.12-0001-dt-bindings-net-rename-BCM4908-Ethernet-binding.patch
deleted file mode 100644
index 563cb3ba91..0000000000
--- a/target/linux/bcm4908/patches-5.4/073-v5.12-0001-dt-bindings-net-rename-BCM4908-Ethernet-binding.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From 6710c5b0674f8811f7d8fbfc526684e7ed77f765 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:32 +0100
-Subject: [PATCH] dt-bindings: net: rename BCM4908 Ethernet binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Rob pointed out that a normal convention is "brcm,bcm4908-enet" so
-update whole binding to match it.
-
-Suggested-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- .../net/{brcm,bcm4908enet.yaml => brcm,bcm4908-enet.yaml}   | 6 +++---
- MAINTAINERS                                                 | 2 +-
- 2 files changed, 4 insertions(+), 4 deletions(-)
- rename Documentation/devicetree/bindings/net/{brcm,bcm4908enet.yaml => brcm,bcm4908-enet.yaml} (85%)
-
---- a/Documentation/devicetree/bindings/net/brcm,bcm4908enet.yaml
-+++ /dev/null
-@@ -1,45 +0,0 @@
--# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
--%YAML 1.2
-----
--$id: http://devicetree.org/schemas/net/brcm,bcm4908enet.yaml#
--$schema: http://devicetree.org/meta-schemas/core.yaml#
--
--title: Broadcom BCM4908 Ethernet controller
--
--description: Broadcom's Ethernet controller integrated into BCM4908 family SoCs
--
--maintainers:
--  - Rafał Miłecki <rafal@milecki.pl>
--
--properties:
--  compatible:
--    const: brcm,bcm4908enet
--
--  reg:
--    maxItems: 1
--
--  interrupts:
--    description: RX interrupt
--
--  interrupt-names:
--    const: rx
--
--required:
--  - reg
--  - interrupts
--  - interrupt-names
--
--additionalProperties: false
--
--examples:
--  - |
--    #include <dt-bindings/interrupt-controller/irq.h>
--    #include <dt-bindings/interrupt-controller/arm-gic.h>
--
--    ethernet@80002000 {
--        compatible = "brcm,bcm4908enet";
--        reg = <0x80002000 0x1000>;
--
--        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
--        interrupt-names = "rx";
--    };
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
-@@ -0,0 +1,45 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/net/brcm,bcm4908-enet.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom BCM4908 Ethernet controller
-+
-+description: Broadcom's Ethernet controller integrated into BCM4908 family SoCs
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  compatible:
-+    const: brcm,bcm4908-enet
-+
-+  reg:
-+    maxItems: 1
-+
-+  interrupts:
-+    description: RX interrupt
-+
-+  interrupt-names:
-+    const: rx
-+
-+required:
-+  - reg
-+  - interrupts
-+  - interrupt-names
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    #include <dt-bindings/interrupt-controller/irq.h>
-+    #include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+    ethernet@80002000 {
-+        compatible = "brcm,bcm4908-enet";
-+        reg = <0x80002000 0x1000>;
-+
-+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+        interrupt-names = "rx";
-+    };
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3213,7 +3213,7 @@ M:	Rafał Miłecki <rafal@milecki.pl>
- M:	bcm-kernel-feedback-list@broadcom.com
- L:	netdev@vger.kernel.org
- S:	Maintained
--F:	Documentation/devicetree/bindings/net/brcm,bcm4908enet.yaml
-+F:	Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
- F:	drivers/net/ethernet/broadcom/bcm4908enet.*
- F:	drivers/net/ethernet/broadcom/unimac.h
- 
diff --git a/target/linux/bcm4908/patches-5.4/073-v5.12-0002-dt-bindings-net-bcm4908-enet-include-ethernet-contro.patch b/target/linux/bcm4908/patches-5.4/073-v5.12-0002-dt-bindings-net-bcm4908-enet-include-ethernet-contro.patch
deleted file mode 100644
index a4409a818a..0000000000
--- a/target/linux/bcm4908/patches-5.4/073-v5.12-0002-dt-bindings-net-bcm4908-enet-include-ethernet-contro.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From f08b5cf1eb1f2aefc6fe4a89c8c757ba94721d0b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:33 +0100
-Subject: [PATCH] dt-bindings: net: bcm4908-enet: include
- ethernet-controller.yaml
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It should be /included/ by every Ethernet controller binding. It adds
-support for various generic properties.
-
-Suggested-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
-+++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
-@@ -11,6 +11,9 @@ description: Broadcom's Ethernet control
- maintainers:
-   - Rafał Miłecki <rafal@milecki.pl>
- 
-+allOf:
-+  - $ref: ethernet-controller.yaml#
-+
- properties:
-   compatible:
-     const: brcm,bcm4908-enet
diff --git a/target/linux/bcm4908/patches-5.4/073-v5.12-0003-net-broadcom-rename-BCM4908-driver-update-DT-binding.patch b/target/linux/bcm4908/patches-5.4/073-v5.12-0003-net-broadcom-rename-BCM4908-driver-update-DT-binding.patch
deleted file mode 100644
index 66681963c1..0000000000
--- a/target/linux/bcm4908/patches-5.4/073-v5.12-0003-net-broadcom-rename-BCM4908-driver-update-DT-binding.patch
+++ /dev/null
@@ -1,1614 +0,0 @@
-From 9d61d138ab30bbfe4a8609853c81e881c4054a0b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:34 +0100
-Subject: [PATCH] net: broadcom: rename BCM4908 driver & update DT binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-compatible string was updated to match normal naming convention so
-update driver as well
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- MAINTAINERS                                   |   2 +-
- drivers/net/ethernet/broadcom/Kconfig         |   2 +-
- drivers/net/ethernet/broadcom/Makefile        |   2 +-
- .../{bcm4908enet.c => bcm4908_enet.c}         | 215 +++++++++---------
- .../{bcm4908enet.h => bcm4908_enet.h}         |   4 +-
- 5 files changed, 113 insertions(+), 112 deletions(-)
- rename drivers/net/ethernet/broadcom/{bcm4908enet.c => bcm4908_enet.c} (68%)
- rename drivers/net/ethernet/broadcom/{bcm4908enet.h => bcm4908_enet.h} (98%)
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3214,7 +3214,7 @@ M:	bcm-kernel-feedback-list@broadcom.com
- L:	netdev@vger.kernel.org
- S:	Maintained
- F:	Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
--F:	drivers/net/ethernet/broadcom/bcm4908enet.*
-+F:	drivers/net/ethernet/broadcom/bcm4908_enet.*
- F:	drivers/net/ethernet/broadcom/unimac.h
- 
- BROADCOM BCM5301X ARM ARCHITECTURE
---- a/drivers/net/ethernet/broadcom/Kconfig
-+++ b/drivers/net/ethernet/broadcom/Kconfig
-@@ -51,7 +51,7 @@ config B44_PCI
- 	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
- 	default y
- 
--config BCM4908ENET
-+config BCM4908_ENET
- 	tristate "Broadcom BCM4908 internal mac support"
- 	depends on ARCH_BCM4908 || COMPILE_TEST
- 	default y
---- a/drivers/net/ethernet/broadcom/Makefile
-+++ b/drivers/net/ethernet/broadcom/Makefile
-@@ -4,7 +4,7 @@
- #
- 
- obj-$(CONFIG_B44) += b44.o
--obj-$(CONFIG_BCM4908ENET) += bcm4908enet.o
-+obj-$(CONFIG_BCM4908_ENET) += bcm4908_enet.o
- obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
- obj-$(CONFIG_BCMGENET) += genet/
- obj-$(CONFIG_BNX2) += bnx2.o
---- a/drivers/net/ethernet/broadcom/bcm4908enet.c
-+++ /dev/null
-@@ -1,676 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-only
--/*
-- * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-- */
--
--#include <linux/delay.h>
--#include <linux/etherdevice.h>
--#include <linux/interrupt.h>
--#include <linux/module.h>
--#include <linux/of.h>
--#include <linux/platform_device.h>
--#include <linux/slab.h>
--#include <linux/string.h>
--
--#include "bcm4908enet.h"
--#include "unimac.h"
--
--#define ENET_DMA_CH_RX_CFG			ENET_DMA_CH0_CFG
--#define ENET_DMA_CH_TX_CFG			ENET_DMA_CH1_CFG
--#define ENET_DMA_CH_RX_STATE_RAM		ENET_DMA_CH0_STATE_RAM
--#define ENET_DMA_CH_TX_STATE_RAM		ENET_DMA_CH1_STATE_RAM
--
--#define ENET_TX_BDS_NUM				200
--#define ENET_RX_BDS_NUM				200
--#define ENET_RX_BDS_NUM_MAX			8192
--
--#define ENET_DMA_INT_DEFAULTS			(ENET_DMA_CH_CFG_INT_DONE | \
--						 ENET_DMA_CH_CFG_INT_NO_DESC | \
--						 ENET_DMA_CH_CFG_INT_BUFF_DONE)
--#define ENET_DMA_MAX_BURST_LEN			8 /* in 64 bit words */
--
--#define ENET_MTU_MIN				60
--#define ENET_MTU_MAX				1500 /* Is it possible to support 2044? */
--#define ENET_MTU_MAX_EXTRA_SIZE			32 /* L2 */
--
--struct bcm4908enet_dma_ring_bd {
--	__le32 ctl;
--	__le32 addr;
--} __packed;
--
--struct bcm4908enet_dma_ring_slot {
--	struct sk_buff *skb;
--	unsigned int len;
--	dma_addr_t dma_addr;
--};
--
--struct bcm4908enet_dma_ring {
--	int is_tx;
--	int read_idx;
--	int write_idx;
--	int length;
--	u16 cfg_block;
--	u16 st_ram_block;
--
--	union {
--		void *cpu_addr;
--		struct bcm4908enet_dma_ring_bd *buf_desc;
--	};
--	dma_addr_t dma_addr;
--
--	struct bcm4908enet_dma_ring_slot *slots;
--};
--
--struct bcm4908enet {
--	struct device *dev;
--	struct net_device *netdev;
--	struct napi_struct napi;
--	void __iomem *base;
--
--	struct bcm4908enet_dma_ring tx_ring;
--	struct bcm4908enet_dma_ring rx_ring;
--};
--
--/***
-- * R/W ops
-- */
--
--static inline u32 enet_read(struct bcm4908enet *enet, u16 offset)
--{
--	return readl(enet->base + offset);
--}
--
--static inline void enet_write(struct bcm4908enet *enet, u16 offset, u32 value)
--{
--	writel(value, enet->base + offset);
--}
--
--static inline void enet_maskset(struct bcm4908enet *enet, u16 offset, u32 mask, u32 set)
--{
--	u32 val;
--
--	WARN_ON(set & ~mask);
--
--	val = enet_read(enet, offset);
--	val = (val & ~mask) | (set & mask);
--	enet_write(enet, offset, val);
--}
--
--static inline void enet_set(struct bcm4908enet *enet, u16 offset, u32 set)
--{
--	enet_maskset(enet, offset, set, set);
--}
--
--static inline u32 enet_umac_read(struct bcm4908enet *enet, u16 offset)
--{
--	return enet_read(enet, ENET_UNIMAC + offset);
--}
--
--static inline void enet_umac_write(struct bcm4908enet *enet, u16 offset, u32 value)
--{
--	enet_write(enet, ENET_UNIMAC + offset, value);
--}
--
--static inline void enet_umac_maskset(struct bcm4908enet *enet, u16 offset, u32 mask, u32 set)
--{
--	enet_maskset(enet, ENET_UNIMAC + offset, mask, set);
--}
--
--static inline void enet_umac_set(struct bcm4908enet *enet, u16 offset, u32 set)
--{
--	enet_set(enet, ENET_UNIMAC + offset, set);
--}
--
--/***
-- * Helpers
-- */
--
--static void bcm4908enet_intrs_on(struct bcm4908enet *enet)
--{
--	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, ENET_DMA_INT_DEFAULTS);
--}
--
--static void bcm4908enet_intrs_off(struct bcm4908enet *enet)
--{
--	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, 0);
--}
--
--static void bcm4908enet_intrs_ack(struct bcm4908enet *enet)
--{
--	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_STAT, ENET_DMA_INT_DEFAULTS);
--}
--
--/***
-- * DMA
-- */
--
--static int bcm4908_dma_alloc_buf_descs(struct bcm4908enet *enet, struct bcm4908enet_dma_ring *ring)
--{
--	int size = ring->length * sizeof(struct bcm4908enet_dma_ring_bd);
--	struct device *dev = enet->dev;
--
--	ring->cpu_addr = dma_alloc_coherent(dev, size, &ring->dma_addr, GFP_KERNEL);
--	if (!ring->cpu_addr)
--		return -ENOMEM;
--
--	if (((uintptr_t)ring->cpu_addr) & (0x40 - 1)) {
--		dev_err(dev, "Invalid DMA ring alignment\n");
--		goto err_free_buf_descs;
--	}
--
--	ring->slots = kzalloc(ring->length * sizeof(*ring->slots), GFP_KERNEL);
--	if (!ring->slots)
--		goto err_free_buf_descs;
--
--	memset(ring->cpu_addr, 0, size);
--
--	ring->read_idx = 0;
--	ring->write_idx = 0;
--
--	return 0;
--
--err_free_buf_descs:
--	dma_free_coherent(dev, size, ring->cpu_addr, ring->dma_addr);
--	return -ENOMEM;
--}
--
--static void bcm4908enet_dma_free(struct bcm4908enet *enet)
--{
--	struct bcm4908enet_dma_ring *tx_ring = &enet->tx_ring;
--	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
--	struct device *dev = enet->dev;
--	int size;
--
--	size = rx_ring->length * sizeof(struct bcm4908enet_dma_ring_bd);
--	if (rx_ring->cpu_addr)
--		dma_free_coherent(dev, size, rx_ring->cpu_addr, rx_ring->dma_addr);
--	kfree(rx_ring->slots);
--
--	size = tx_ring->length * sizeof(struct bcm4908enet_dma_ring_bd);
--	if (tx_ring->cpu_addr)
--		dma_free_coherent(dev, size, tx_ring->cpu_addr, tx_ring->dma_addr);
--	kfree(tx_ring->slots);
--}
--
--static int bcm4908enet_dma_alloc(struct bcm4908enet *enet)
--{
--	struct bcm4908enet_dma_ring *tx_ring = &enet->tx_ring;
--	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
--	struct device *dev = enet->dev;
--	int err;
--
--	tx_ring->length = ENET_TX_BDS_NUM;
--	tx_ring->is_tx = 1;
--	tx_ring->cfg_block = ENET_DMA_CH_TX_CFG;
--	tx_ring->st_ram_block = ENET_DMA_CH_TX_STATE_RAM;
--	err = bcm4908_dma_alloc_buf_descs(enet, tx_ring);
--	if (err) {
--		dev_err(dev, "Failed to alloc TX buf descriptors: %d\n", err);
--		return err;
--	}
--
--	rx_ring->length = ENET_RX_BDS_NUM;
--	rx_ring->is_tx = 0;
--	rx_ring->cfg_block = ENET_DMA_CH_RX_CFG;
--	rx_ring->st_ram_block = ENET_DMA_CH_RX_STATE_RAM;
--	err = bcm4908_dma_alloc_buf_descs(enet, rx_ring);
--	if (err) {
--		dev_err(dev, "Failed to alloc RX buf descriptors: %d\n", err);
--		bcm4908enet_dma_free(enet);
--		return err;
--	}
--
--	return 0;
--}
--
--static void bcm4908enet_dma_reset(struct bcm4908enet *enet)
--{
--	struct bcm4908enet_dma_ring *rings[] = { &enet->rx_ring, &enet->tx_ring };
--	int i;
--
--	/* Disable the DMA controller and channel */
--	for (i = 0; i < ARRAY_SIZE(rings); i++)
--		enet_write(enet, rings[i]->cfg_block + ENET_DMA_CH_CFG, 0);
--	enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN, 0);
--
--	/* Reset channels state */
--	for (i = 0; i < ARRAY_SIZE(rings); i++) {
--		struct bcm4908enet_dma_ring *ring = rings[i];
--
--		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR, 0);
--		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_STATE_DATA, 0);
--		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS, 0);
--		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR, 0);
--	}
--}
--
--static int bcm4908enet_dma_alloc_rx_buf(struct bcm4908enet *enet, unsigned int idx)
--{
--	struct bcm4908enet_dma_ring_bd *buf_desc = &enet->rx_ring.buf_desc[idx];
--	struct bcm4908enet_dma_ring_slot *slot = &enet->rx_ring.slots[idx];
--	struct device *dev = enet->dev;
--	u32 tmp;
--	int err;
--
--	slot->len = ENET_MTU_MAX + ENET_MTU_MAX_EXTRA_SIZE;
--
--	slot->skb = netdev_alloc_skb(enet->netdev, slot->len);
--	if (!slot->skb)
--		return -ENOMEM;
--
--	slot->dma_addr = dma_map_single(dev, slot->skb->data, slot->len, DMA_FROM_DEVICE);
--	err = dma_mapping_error(dev, slot->dma_addr);
--	if (err) {
--		dev_err(dev, "Failed to map DMA buffer: %d\n", err);
--		kfree_skb(slot->skb);
--		slot->skb = NULL;
--		return err;
--	}
--
--	tmp = slot->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
--	tmp |= DMA_CTL_STATUS_OWN;
--	if (idx == enet->rx_ring.length - 1)
--		tmp |= DMA_CTL_STATUS_WRAP;
--	buf_desc->ctl = cpu_to_le32(tmp);
--	buf_desc->addr = cpu_to_le32(slot->dma_addr);
--
--	return 0;
--}
--
--static void bcm4908enet_dma_ring_init(struct bcm4908enet *enet,
--				      struct bcm4908enet_dma_ring *ring)
--{
--	int reset_channel = 0; /* We support only 1 main channel (with TX and RX) */
--	int reset_subch = ring->is_tx ? 1 : 0;
--
--	/* Reset the DMA channel */
--	enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, BIT(reset_channel * 2 + reset_subch));
--	enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, 0);
--
--	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
--	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_MAX_BURST, ENET_DMA_MAX_BURST_LEN);
--	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_INT_MASK, 0);
--
--	enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR,
--		   (uint32_t)ring->dma_addr);
--}
--
--static void bcm4908enet_dma_uninit(struct bcm4908enet *enet)
--{
--	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
--	struct bcm4908enet_dma_ring_slot *slot;
--	struct device *dev = enet->dev;
--	int i;
--
--	for (i = rx_ring->length - 1; i >= 0; i--) {
--		slot = &rx_ring->slots[i];
--		if (!slot->skb)
--			continue;
--		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_FROM_DEVICE);
--		kfree_skb(slot->skb);
--		slot->skb = NULL;
--	}
--}
--
--static int bcm4908enet_dma_init(struct bcm4908enet *enet)
--{
--	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
--	struct device *dev = enet->dev;
--	int err;
--	int i;
--
--	for (i = 0; i < rx_ring->length; i++) {
--		err = bcm4908enet_dma_alloc_rx_buf(enet, i);
--		if (err) {
--			dev_err(dev, "Failed to alloc RX buffer: %d\n", err);
--			bcm4908enet_dma_uninit(enet);
--			return err;
--		}
--	}
--
--	bcm4908enet_dma_ring_init(enet, &enet->tx_ring);
--	bcm4908enet_dma_ring_init(enet, &enet->rx_ring);
--
--	return 0;
--}
--
--static void bcm4908enet_dma_tx_ring_ensable(struct bcm4908enet *enet,
--					    struct bcm4908enet_dma_ring *ring)
--{
--	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
--}
--
--static void bcm4908enet_dma_tx_ring_disable(struct bcm4908enet *enet,
--					    struct bcm4908enet_dma_ring *ring)
--{
--	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
--}
--
--static void bcm4908enet_dma_rx_ring_enable(struct bcm4908enet *enet,
--					   struct bcm4908enet_dma_ring *ring)
--{
--	enet_set(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
--}
--
--static void bcm4908enet_dma_rx_ring_disable(struct bcm4908enet *enet,
--					    struct bcm4908enet_dma_ring *ring)
--{
--	unsigned long deadline;
--	u32 tmp;
--
--	enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
--
--	deadline = jiffies + usecs_to_jiffies(2000);
--	do {
--		tmp = enet_read(enet, ring->cfg_block + ENET_DMA_CH_CFG);
--		if (!(tmp & ENET_DMA_CH_CFG_ENABLE))
--			return;
--		enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
--		usleep_range(10, 30);
--	} while (!time_after_eq(jiffies, deadline));
--
--	dev_warn(enet->dev, "Timeout waiting for DMA TX stop\n");
--}
--
--/***
-- * Ethernet driver
-- */
--
--static void bcm4908enet_gmac_init(struct bcm4908enet *enet)
--{
--	u32 cmd;
--
--	cmd = enet_umac_read(enet, UMAC_CMD);
--	enet_umac_write(enet, UMAC_CMD, cmd | CMD_SW_RESET);
--	enet_umac_write(enet, UMAC_CMD, cmd & ~CMD_SW_RESET);
--
--	enet_set(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH);
--	enet_maskset(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH, 0);
--
--	enet_set(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB);
--	enet_maskset(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB, 0);
--
--	cmd = enet_umac_read(enet, UMAC_CMD);
--	cmd &= ~(CMD_SPEED_MASK << CMD_SPEED_SHIFT);
--	cmd &= ~CMD_TX_EN;
--	cmd &= ~CMD_RX_EN;
--	cmd |= CMD_SPEED_1000 << CMD_SPEED_SHIFT;
--	enet_umac_write(enet, UMAC_CMD, cmd);
--
--	enet_maskset(enet, ENET_GMAC_STATUS,
--		     ENET_GMAC_STATUS_ETH_SPEED_MASK |
--		     ENET_GMAC_STATUS_HD |
--		     ENET_GMAC_STATUS_AUTO_CFG_EN |
--		     ENET_GMAC_STATUS_LINK_UP,
--		     ENET_GMAC_STATUS_ETH_SPEED_1000 |
--		     ENET_GMAC_STATUS_AUTO_CFG_EN |
--		     ENET_GMAC_STATUS_LINK_UP);
--}
--
--static irqreturn_t bcm4908enet_irq_handler(int irq, void *dev_id)
--{
--	struct bcm4908enet *enet = dev_id;
--
--	bcm4908enet_intrs_off(enet);
--	bcm4908enet_intrs_ack(enet);
--
--	napi_schedule(&enet->napi);
--
--	return IRQ_HANDLED;
--}
--
--static int bcm4908enet_open(struct net_device *netdev)
--{
--	struct bcm4908enet *enet = netdev_priv(netdev);
--	struct device *dev = enet->dev;
--	int err;
--
--	err = request_irq(netdev->irq, bcm4908enet_irq_handler, 0, "enet", enet);
--	if (err) {
--		dev_err(dev, "Failed to request IRQ %d: %d\n", netdev->irq, err);
--		return err;
--	}
--
--	bcm4908enet_gmac_init(enet);
--	bcm4908enet_dma_reset(enet);
--	bcm4908enet_dma_init(enet);
--
--	enet_umac_set(enet, UMAC_CMD, CMD_TX_EN | CMD_RX_EN);
--
--	enet_set(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN);
--	enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_FLOWC_CH1_EN, 0);
--	bcm4908enet_dma_rx_ring_enable(enet, &enet->rx_ring);
--
--	napi_enable(&enet->napi);
--	netif_carrier_on(netdev);
--	netif_start_queue(netdev);
--
--	bcm4908enet_intrs_ack(enet);
--	bcm4908enet_intrs_on(enet);
--
--	return 0;
--}
--
--static int bcm4908enet_stop(struct net_device *netdev)
--{
--	struct bcm4908enet *enet = netdev_priv(netdev);
--
--	netif_stop_queue(netdev);
--	netif_carrier_off(netdev);
--	napi_disable(&enet->napi);
--
--	bcm4908enet_dma_rx_ring_disable(enet, &enet->rx_ring);
--	bcm4908enet_dma_tx_ring_disable(enet, &enet->tx_ring);
--
--	bcm4908enet_dma_uninit(enet);
--
--	free_irq(enet->netdev->irq, enet);
--
--	return 0;
--}
--
--static int bcm4908enet_start_xmit(struct sk_buff *skb, struct net_device *netdev)
--{
--	struct bcm4908enet *enet = netdev_priv(netdev);
--	struct bcm4908enet_dma_ring *ring = &enet->tx_ring;
--	struct bcm4908enet_dma_ring_slot *slot;
--	struct device *dev = enet->dev;
--	struct bcm4908enet_dma_ring_bd *buf_desc;
--	int free_buf_descs;
--	u32 tmp;
--
--	/* Free transmitted skbs */
--	while (ring->read_idx != ring->write_idx) {
--		buf_desc = &ring->buf_desc[ring->read_idx];
--		if (buf_desc->ctl & DMA_CTL_STATUS_OWN)
--			break;
--		slot = &ring->slots[ring->read_idx];
--
--		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
--		dev_kfree_skb(slot->skb);
--		if (++ring->read_idx == ring->length)
--			ring->read_idx = 0;
--	}
--
--	/* Don't use the last empty buf descriptor */
--	if (ring->read_idx <= ring->write_idx)
--		free_buf_descs = ring->read_idx - ring->write_idx + ring->length;
--	else
--		free_buf_descs = ring->read_idx - ring->write_idx;
--	if (free_buf_descs < 2)
--		return NETDEV_TX_BUSY;
--
--	/* Hardware removes OWN bit after sending data */
--	buf_desc = &ring->buf_desc[ring->write_idx];
--	if (unlikely(le32_to_cpu(buf_desc->ctl) & DMA_CTL_STATUS_OWN)) {
--		netif_stop_queue(netdev);
--		return NETDEV_TX_BUSY;
--	}
--
--	slot = &ring->slots[ring->write_idx];
--	slot->skb = skb;
--	slot->len = skb->len;
--	slot->dma_addr = dma_map_single(dev, skb->data, skb->len, DMA_TO_DEVICE);
--	if (unlikely(dma_mapping_error(dev, slot->dma_addr)))
--		return NETDEV_TX_BUSY;
--
--	tmp = skb->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
--	tmp |= DMA_CTL_STATUS_OWN;
--	tmp |= DMA_CTL_STATUS_SOP;
--	tmp |= DMA_CTL_STATUS_EOP;
--	tmp |= DMA_CTL_STATUS_APPEND_CRC;
--	if (ring->write_idx + 1 == ring->length - 1)
--		tmp |= DMA_CTL_STATUS_WRAP;
--
--	buf_desc->addr = cpu_to_le32((uint32_t)slot->dma_addr);
--	buf_desc->ctl = cpu_to_le32(tmp);
--
--	bcm4908enet_dma_tx_ring_ensable(enet, &enet->tx_ring);
--
--	if (++ring->write_idx == ring->length - 1)
--		ring->write_idx = 0;
--	enet->netdev->stats.tx_bytes += skb->len;
--	enet->netdev->stats.tx_packets++;
--
--	return NETDEV_TX_OK;
--}
--
--static int bcm4908enet_poll(struct napi_struct *napi, int weight)
--{
--	struct bcm4908enet *enet = container_of(napi, struct bcm4908enet, napi);
--	struct device *dev = enet->dev;
--	int handled = 0;
--
--	while (handled < weight) {
--		struct bcm4908enet_dma_ring_bd *buf_desc;
--		struct bcm4908enet_dma_ring_slot slot;
--		u32 ctl;
--		int len;
--		int err;
--
--		buf_desc = &enet->rx_ring.buf_desc[enet->rx_ring.read_idx];
--		ctl = le32_to_cpu(buf_desc->ctl);
--		if (ctl & DMA_CTL_STATUS_OWN)
--			break;
--
--		slot = enet->rx_ring.slots[enet->rx_ring.read_idx];
--
--		/* Provide new buffer before unpinning the old one */
--		err = bcm4908enet_dma_alloc_rx_buf(enet, enet->rx_ring.read_idx);
--		if (err)
--			break;
--
--		if (++enet->rx_ring.read_idx == enet->rx_ring.length)
--			enet->rx_ring.read_idx = 0;
--
--		len = (ctl & DMA_CTL_LEN_DESC_BUFLENGTH) >> DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
--
--		if (len < ENET_MTU_MIN ||
--		    (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) {
--			enet->netdev->stats.rx_dropped++;
--			break;
--		}
--
--		dma_unmap_single(dev, slot.dma_addr, slot.len, DMA_FROM_DEVICE);
--
--		skb_put(slot.skb, len - 4 + 2);
--		slot.skb->protocol = eth_type_trans(slot.skb, enet->netdev);
--		netif_receive_skb(slot.skb);
--
--		enet->netdev->stats.rx_packets++;
--		enet->netdev->stats.rx_bytes += len;
--	}
--
--	if (handled < weight) {
--		napi_complete_done(napi, handled);
--		bcm4908enet_intrs_on(enet);
--	}
--
--	return handled;
--}
--
--static const struct net_device_ops bcm96xx_netdev_ops = {
--	.ndo_open = bcm4908enet_open,
--	.ndo_stop = bcm4908enet_stop,
--	.ndo_start_xmit = bcm4908enet_start_xmit,
--	.ndo_set_mac_address = eth_mac_addr,
--};
--
--static int bcm4908enet_probe(struct platform_device *pdev)
--{
--	struct device *dev = &pdev->dev;
--	struct net_device *netdev;
--	struct bcm4908enet *enet;
--	int err;
--
--	netdev = devm_alloc_etherdev(dev, sizeof(*enet));
--	if (!netdev)
--		return -ENOMEM;
--
--	enet = netdev_priv(netdev);
--	enet->dev = dev;
--	enet->netdev = netdev;
--
--	enet->base = devm_platform_ioremap_resource(pdev, 0);
--	if (IS_ERR(enet->base)) {
--		dev_err(dev, "Failed to map registers: %ld\n", PTR_ERR(enet->base));
--		return PTR_ERR(enet->base);
--	}
--
--	netdev->irq = platform_get_irq_byname(pdev, "rx");
--	if (netdev->irq < 0)
--		return netdev->irq;
--
--	dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
--
--	err = bcm4908enet_dma_alloc(enet);
--	if (err)
--		return err;
--
--	SET_NETDEV_DEV(netdev, &pdev->dev);
--	eth_hw_addr_random(netdev);
--	netdev->netdev_ops = &bcm96xx_netdev_ops;
--	netdev->min_mtu = ETH_ZLEN;
--	netdev->mtu = ENET_MTU_MAX;
--	netdev->max_mtu = ENET_MTU_MAX;
--	netif_napi_add(netdev, &enet->napi, bcm4908enet_poll, 64);
--
--	err = register_netdev(netdev);
--	if (err) {
--		bcm4908enet_dma_free(enet);
--		return err;
--	}
--
--	platform_set_drvdata(pdev, enet);
--
--	return 0;
--}
--
--static int bcm4908enet_remove(struct platform_device *pdev)
--{
--	struct bcm4908enet *enet = platform_get_drvdata(pdev);
--
--	unregister_netdev(enet->netdev);
--	netif_napi_del(&enet->napi);
--	bcm4908enet_dma_free(enet);
--
--	return 0;
--}
--
--static const struct of_device_id bcm4908enet_of_match[] = {
--	{ .compatible = "brcm,bcm4908enet"},
--	{},
--};
--
--static struct platform_driver bcm4908enet_driver = {
--	.driver = {
--		.name = "bcm4908enet",
--		.of_match_table = bcm4908enet_of_match,
--	},
--	.probe	= bcm4908enet_probe,
--	.remove = bcm4908enet_remove,
--};
--module_platform_driver(bcm4908enet_driver);
--
--MODULE_LICENSE("GPL v2");
--MODULE_DEVICE_TABLE(of, bcm4908enet_of_match);
---- /dev/null
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -0,0 +1,677 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/etherdevice.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+
-+#include "bcm4908_enet.h"
-+#include "unimac.h"
-+
-+#define ENET_DMA_CH_RX_CFG			ENET_DMA_CH0_CFG
-+#define ENET_DMA_CH_TX_CFG			ENET_DMA_CH1_CFG
-+#define ENET_DMA_CH_RX_STATE_RAM		ENET_DMA_CH0_STATE_RAM
-+#define ENET_DMA_CH_TX_STATE_RAM		ENET_DMA_CH1_STATE_RAM
-+
-+#define ENET_TX_BDS_NUM				200
-+#define ENET_RX_BDS_NUM				200
-+#define ENET_RX_BDS_NUM_MAX			8192
-+
-+#define ENET_DMA_INT_DEFAULTS			(ENET_DMA_CH_CFG_INT_DONE | \
-+						 ENET_DMA_CH_CFG_INT_NO_DESC | \
-+						 ENET_DMA_CH_CFG_INT_BUFF_DONE)
-+#define ENET_DMA_MAX_BURST_LEN			8 /* in 64 bit words */
-+
-+#define ENET_MTU_MIN				60
-+#define ENET_MTU_MAX				1500 /* Is it possible to support 2044? */
-+#define ENET_MTU_MAX_EXTRA_SIZE			32 /* L2 */
-+
-+struct bcm4908_enet_dma_ring_bd {
-+	__le32 ctl;
-+	__le32 addr;
-+} __packed;
-+
-+struct bcm4908_enet_dma_ring_slot {
-+	struct sk_buff *skb;
-+	unsigned int len;
-+	dma_addr_t dma_addr;
-+};
-+
-+struct bcm4908_enet_dma_ring {
-+	int is_tx;
-+	int read_idx;
-+	int write_idx;
-+	int length;
-+	u16 cfg_block;
-+	u16 st_ram_block;
-+
-+	union {
-+		void *cpu_addr;
-+		struct bcm4908_enet_dma_ring_bd *buf_desc;
-+	};
-+	dma_addr_t dma_addr;
-+
-+	struct bcm4908_enet_dma_ring_slot *slots;
-+};
-+
-+struct bcm4908_enet {
-+	struct device *dev;
-+	struct net_device *netdev;
-+	struct napi_struct napi;
-+	void __iomem *base;
-+
-+	struct bcm4908_enet_dma_ring tx_ring;
-+	struct bcm4908_enet_dma_ring rx_ring;
-+};
-+
-+/***
-+ * R/W ops
-+ */
-+
-+static inline u32 enet_read(struct bcm4908_enet *enet, u16 offset)
-+{
-+	return readl(enet->base + offset);
-+}
-+
-+static inline void enet_write(struct bcm4908_enet *enet, u16 offset, u32 value)
-+{
-+	writel(value, enet->base + offset);
-+}
-+
-+static inline void enet_maskset(struct bcm4908_enet *enet, u16 offset, u32 mask, u32 set)
-+{
-+	u32 val;
-+
-+	WARN_ON(set & ~mask);
-+
-+	val = enet_read(enet, offset);
-+	val = (val & ~mask) | (set & mask);
-+	enet_write(enet, offset, val);
-+}
-+
-+static inline void enet_set(struct bcm4908_enet *enet, u16 offset, u32 set)
-+{
-+	enet_maskset(enet, offset, set, set);
-+}
-+
-+static inline u32 enet_umac_read(struct bcm4908_enet *enet, u16 offset)
-+{
-+	return enet_read(enet, ENET_UNIMAC + offset);
-+}
-+
-+static inline void enet_umac_write(struct bcm4908_enet *enet, u16 offset, u32 value)
-+{
-+	enet_write(enet, ENET_UNIMAC + offset, value);
-+}
-+
-+static inline void enet_umac_maskset(struct bcm4908_enet *enet, u16 offset, u32 mask, u32 set)
-+{
-+	enet_maskset(enet, ENET_UNIMAC + offset, mask, set);
-+}
-+
-+static inline void enet_umac_set(struct bcm4908_enet *enet, u16 offset, u32 set)
-+{
-+	enet_set(enet, ENET_UNIMAC + offset, set);
-+}
-+
-+/***
-+ * Helpers
-+ */
-+
-+static void bcm4908_enet_intrs_on(struct bcm4908_enet *enet)
-+{
-+	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, ENET_DMA_INT_DEFAULTS);
-+}
-+
-+static void bcm4908_enet_intrs_off(struct bcm4908_enet *enet)
-+{
-+	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, 0);
-+}
-+
-+static void bcm4908_enet_intrs_ack(struct bcm4908_enet *enet)
-+{
-+	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_STAT, ENET_DMA_INT_DEFAULTS);
-+}
-+
-+/***
-+ * DMA
-+ */
-+
-+static int bcm4908_dma_alloc_buf_descs(struct bcm4908_enet *enet,
-+				       struct bcm4908_enet_dma_ring *ring)
-+{
-+	int size = ring->length * sizeof(struct bcm4908_enet_dma_ring_bd);
-+	struct device *dev = enet->dev;
-+
-+	ring->cpu_addr = dma_alloc_coherent(dev, size, &ring->dma_addr, GFP_KERNEL);
-+	if (!ring->cpu_addr)
-+		return -ENOMEM;
-+
-+	if (((uintptr_t)ring->cpu_addr) & (0x40 - 1)) {
-+		dev_err(dev, "Invalid DMA ring alignment\n");
-+		goto err_free_buf_descs;
-+	}
-+
-+	ring->slots = kzalloc(ring->length * sizeof(*ring->slots), GFP_KERNEL);
-+	if (!ring->slots)
-+		goto err_free_buf_descs;
-+
-+	memset(ring->cpu_addr, 0, size);
-+
-+	ring->read_idx = 0;
-+	ring->write_idx = 0;
-+
-+	return 0;
-+
-+err_free_buf_descs:
-+	dma_free_coherent(dev, size, ring->cpu_addr, ring->dma_addr);
-+	return -ENOMEM;
-+}
-+
-+static void bcm4908_enet_dma_free(struct bcm4908_enet *enet)
-+{
-+	struct bcm4908_enet_dma_ring *tx_ring = &enet->tx_ring;
-+	struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct device *dev = enet->dev;
-+	int size;
-+
-+	size = rx_ring->length * sizeof(struct bcm4908_enet_dma_ring_bd);
-+	if (rx_ring->cpu_addr)
-+		dma_free_coherent(dev, size, rx_ring->cpu_addr, rx_ring->dma_addr);
-+	kfree(rx_ring->slots);
-+
-+	size = tx_ring->length * sizeof(struct bcm4908_enet_dma_ring_bd);
-+	if (tx_ring->cpu_addr)
-+		dma_free_coherent(dev, size, tx_ring->cpu_addr, tx_ring->dma_addr);
-+	kfree(tx_ring->slots);
-+}
-+
-+static int bcm4908_enet_dma_alloc(struct bcm4908_enet *enet)
-+{
-+	struct bcm4908_enet_dma_ring *tx_ring = &enet->tx_ring;
-+	struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct device *dev = enet->dev;
-+	int err;
-+
-+	tx_ring->length = ENET_TX_BDS_NUM;
-+	tx_ring->is_tx = 1;
-+	tx_ring->cfg_block = ENET_DMA_CH_TX_CFG;
-+	tx_ring->st_ram_block = ENET_DMA_CH_TX_STATE_RAM;
-+	err = bcm4908_dma_alloc_buf_descs(enet, tx_ring);
-+	if (err) {
-+		dev_err(dev, "Failed to alloc TX buf descriptors: %d\n", err);
-+		return err;
-+	}
-+
-+	rx_ring->length = ENET_RX_BDS_NUM;
-+	rx_ring->is_tx = 0;
-+	rx_ring->cfg_block = ENET_DMA_CH_RX_CFG;
-+	rx_ring->st_ram_block = ENET_DMA_CH_RX_STATE_RAM;
-+	err = bcm4908_dma_alloc_buf_descs(enet, rx_ring);
-+	if (err) {
-+		dev_err(dev, "Failed to alloc RX buf descriptors: %d\n", err);
-+		bcm4908_enet_dma_free(enet);
-+		return err;
-+	}
-+
-+	return 0;
-+}
-+
-+static void bcm4908_enet_dma_reset(struct bcm4908_enet *enet)
-+{
-+	struct bcm4908_enet_dma_ring *rings[] = { &enet->rx_ring, &enet->tx_ring };
-+	int i;
-+
-+	/* Disable the DMA controller and channel */
-+	for (i = 0; i < ARRAY_SIZE(rings); i++)
-+		enet_write(enet, rings[i]->cfg_block + ENET_DMA_CH_CFG, 0);
-+	enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN, 0);
-+
-+	/* Reset channels state */
-+	for (i = 0; i < ARRAY_SIZE(rings); i++) {
-+		struct bcm4908_enet_dma_ring *ring = rings[i];
-+
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR, 0);
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_STATE_DATA, 0);
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS, 0);
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR, 0);
-+	}
-+}
-+
-+static int bcm4908_enet_dma_alloc_rx_buf(struct bcm4908_enet *enet, unsigned int idx)
-+{
-+	struct bcm4908_enet_dma_ring_bd *buf_desc = &enet->rx_ring.buf_desc[idx];
-+	struct bcm4908_enet_dma_ring_slot *slot = &enet->rx_ring.slots[idx];
-+	struct device *dev = enet->dev;
-+	u32 tmp;
-+	int err;
-+
-+	slot->len = ENET_MTU_MAX + ENET_MTU_MAX_EXTRA_SIZE;
-+
-+	slot->skb = netdev_alloc_skb(enet->netdev, slot->len);
-+	if (!slot->skb)
-+		return -ENOMEM;
-+
-+	slot->dma_addr = dma_map_single(dev, slot->skb->data, slot->len, DMA_FROM_DEVICE);
-+	err = dma_mapping_error(dev, slot->dma_addr);
-+	if (err) {
-+		dev_err(dev, "Failed to map DMA buffer: %d\n", err);
-+		kfree_skb(slot->skb);
-+		slot->skb = NULL;
-+		return err;
-+	}
-+
-+	tmp = slot->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+	tmp |= DMA_CTL_STATUS_OWN;
-+	if (idx == enet->rx_ring.length - 1)
-+		tmp |= DMA_CTL_STATUS_WRAP;
-+	buf_desc->ctl = cpu_to_le32(tmp);
-+	buf_desc->addr = cpu_to_le32(slot->dma_addr);
-+
-+	return 0;
-+}
-+
-+static void bcm4908_enet_dma_ring_init(struct bcm4908_enet *enet,
-+				       struct bcm4908_enet_dma_ring *ring)
-+{
-+	int reset_channel = 0; /* We support only 1 main channel (with TX and RX) */
-+	int reset_subch = ring->is_tx ? 1 : 0;
-+
-+	/* Reset the DMA channel */
-+	enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, BIT(reset_channel * 2 + reset_subch));
-+	enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, 0);
-+
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_MAX_BURST, ENET_DMA_MAX_BURST_LEN);
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_INT_MASK, 0);
-+
-+	enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR,
-+		   (uint32_t)ring->dma_addr);
-+}
-+
-+static void bcm4908_enet_dma_uninit(struct bcm4908_enet *enet)
-+{
-+	struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct bcm4908_enet_dma_ring_slot *slot;
-+	struct device *dev = enet->dev;
-+	int i;
-+
-+	for (i = rx_ring->length - 1; i >= 0; i--) {
-+		slot = &rx_ring->slots[i];
-+		if (!slot->skb)
-+			continue;
-+		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_FROM_DEVICE);
-+		kfree_skb(slot->skb);
-+		slot->skb = NULL;
-+	}
-+}
-+
-+static int bcm4908_enet_dma_init(struct bcm4908_enet *enet)
-+{
-+	struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct device *dev = enet->dev;
-+	int err;
-+	int i;
-+
-+	for (i = 0; i < rx_ring->length; i++) {
-+		err = bcm4908_enet_dma_alloc_rx_buf(enet, i);
-+		if (err) {
-+			dev_err(dev, "Failed to alloc RX buffer: %d\n", err);
-+			bcm4908_enet_dma_uninit(enet);
-+			return err;
-+		}
-+	}
-+
-+	bcm4908_enet_dma_ring_init(enet, &enet->tx_ring);
-+	bcm4908_enet_dma_ring_init(enet, &enet->rx_ring);
-+
-+	return 0;
-+}
-+
-+static void bcm4908_enet_dma_tx_ring_ensable(struct bcm4908_enet *enet,
-+					     struct bcm4908_enet_dma_ring *ring)
-+{
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
-+}
-+
-+static void bcm4908_enet_dma_tx_ring_disable(struct bcm4908_enet *enet,
-+					     struct bcm4908_enet_dma_ring *ring)
-+{
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
-+}
-+
-+static void bcm4908_enet_dma_rx_ring_enable(struct bcm4908_enet *enet,
-+					    struct bcm4908_enet_dma_ring *ring)
-+{
-+	enet_set(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
-+}
-+
-+static void bcm4908_enet_dma_rx_ring_disable(struct bcm4908_enet *enet,
-+					     struct bcm4908_enet_dma_ring *ring)
-+{
-+	unsigned long deadline;
-+	u32 tmp;
-+
-+	enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
-+
-+	deadline = jiffies + usecs_to_jiffies(2000);
-+	do {
-+		tmp = enet_read(enet, ring->cfg_block + ENET_DMA_CH_CFG);
-+		if (!(tmp & ENET_DMA_CH_CFG_ENABLE))
-+			return;
-+		enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
-+		usleep_range(10, 30);
-+	} while (!time_after_eq(jiffies, deadline));
-+
-+	dev_warn(enet->dev, "Timeout waiting for DMA TX stop\n");
-+}
-+
-+/***
-+ * Ethernet driver
-+ */
-+
-+static void bcm4908_enet_gmac_init(struct bcm4908_enet *enet)
-+{
-+	u32 cmd;
-+
-+	cmd = enet_umac_read(enet, UMAC_CMD);
-+	enet_umac_write(enet, UMAC_CMD, cmd | CMD_SW_RESET);
-+	enet_umac_write(enet, UMAC_CMD, cmd & ~CMD_SW_RESET);
-+
-+	enet_set(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH);
-+	enet_maskset(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH, 0);
-+
-+	enet_set(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB);
-+	enet_maskset(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB, 0);
-+
-+	cmd = enet_umac_read(enet, UMAC_CMD);
-+	cmd &= ~(CMD_SPEED_MASK << CMD_SPEED_SHIFT);
-+	cmd &= ~CMD_TX_EN;
-+	cmd &= ~CMD_RX_EN;
-+	cmd |= CMD_SPEED_1000 << CMD_SPEED_SHIFT;
-+	enet_umac_write(enet, UMAC_CMD, cmd);
-+
-+	enet_maskset(enet, ENET_GMAC_STATUS,
-+		     ENET_GMAC_STATUS_ETH_SPEED_MASK |
-+		     ENET_GMAC_STATUS_HD |
-+		     ENET_GMAC_STATUS_AUTO_CFG_EN |
-+		     ENET_GMAC_STATUS_LINK_UP,
-+		     ENET_GMAC_STATUS_ETH_SPEED_1000 |
-+		     ENET_GMAC_STATUS_AUTO_CFG_EN |
-+		     ENET_GMAC_STATUS_LINK_UP);
-+}
-+
-+static irqreturn_t bcm4908_enet_irq_handler(int irq, void *dev_id)
-+{
-+	struct bcm4908_enet *enet = dev_id;
-+
-+	bcm4908_enet_intrs_off(enet);
-+	bcm4908_enet_intrs_ack(enet);
-+
-+	napi_schedule(&enet->napi);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int bcm4908_enet_open(struct net_device *netdev)
-+{
-+	struct bcm4908_enet *enet = netdev_priv(netdev);
-+	struct device *dev = enet->dev;
-+	int err;
-+
-+	err = request_irq(netdev->irq, bcm4908_enet_irq_handler, 0, "enet", enet);
-+	if (err) {
-+		dev_err(dev, "Failed to request IRQ %d: %d\n", netdev->irq, err);
-+		return err;
-+	}
-+
-+	bcm4908_enet_gmac_init(enet);
-+	bcm4908_enet_dma_reset(enet);
-+	bcm4908_enet_dma_init(enet);
-+
-+	enet_umac_set(enet, UMAC_CMD, CMD_TX_EN | CMD_RX_EN);
-+
-+	enet_set(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN);
-+	enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_FLOWC_CH1_EN, 0);
-+	bcm4908_enet_dma_rx_ring_enable(enet, &enet->rx_ring);
-+
-+	napi_enable(&enet->napi);
-+	netif_carrier_on(netdev);
-+	netif_start_queue(netdev);
-+
-+	bcm4908_enet_intrs_ack(enet);
-+	bcm4908_enet_intrs_on(enet);
-+
-+	return 0;
-+}
-+
-+static int bcm4908_enet_stop(struct net_device *netdev)
-+{
-+	struct bcm4908_enet *enet = netdev_priv(netdev);
-+
-+	netif_stop_queue(netdev);
-+	netif_carrier_off(netdev);
-+	napi_disable(&enet->napi);
-+
-+	bcm4908_enet_dma_rx_ring_disable(enet, &enet->rx_ring);
-+	bcm4908_enet_dma_tx_ring_disable(enet, &enet->tx_ring);
-+
-+	bcm4908_enet_dma_uninit(enet);
-+
-+	free_irq(enet->netdev->irq, enet);
-+
-+	return 0;
-+}
-+
-+static int bcm4908_enet_start_xmit(struct sk_buff *skb, struct net_device *netdev)
-+{
-+	struct bcm4908_enet *enet = netdev_priv(netdev);
-+	struct bcm4908_enet_dma_ring *ring = &enet->tx_ring;
-+	struct bcm4908_enet_dma_ring_slot *slot;
-+	struct device *dev = enet->dev;
-+	struct bcm4908_enet_dma_ring_bd *buf_desc;
-+	int free_buf_descs;
-+	u32 tmp;
-+
-+	/* Free transmitted skbs */
-+	while (ring->read_idx != ring->write_idx) {
-+		buf_desc = &ring->buf_desc[ring->read_idx];
-+		if (buf_desc->ctl & DMA_CTL_STATUS_OWN)
-+			break;
-+		slot = &ring->slots[ring->read_idx];
-+
-+		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
-+		dev_kfree_skb(slot->skb);
-+		if (++ring->read_idx == ring->length)
-+			ring->read_idx = 0;
-+	}
-+
-+	/* Don't use the last empty buf descriptor */
-+	if (ring->read_idx <= ring->write_idx)
-+		free_buf_descs = ring->read_idx - ring->write_idx + ring->length;
-+	else
-+		free_buf_descs = ring->read_idx - ring->write_idx;
-+	if (free_buf_descs < 2)
-+		return NETDEV_TX_BUSY;
-+
-+	/* Hardware removes OWN bit after sending data */
-+	buf_desc = &ring->buf_desc[ring->write_idx];
-+	if (unlikely(le32_to_cpu(buf_desc->ctl) & DMA_CTL_STATUS_OWN)) {
-+		netif_stop_queue(netdev);
-+		return NETDEV_TX_BUSY;
-+	}
-+
-+	slot = &ring->slots[ring->write_idx];
-+	slot->skb = skb;
-+	slot->len = skb->len;
-+	slot->dma_addr = dma_map_single(dev, skb->data, skb->len, DMA_TO_DEVICE);
-+	if (unlikely(dma_mapping_error(dev, slot->dma_addr)))
-+		return NETDEV_TX_BUSY;
-+
-+	tmp = skb->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+	tmp |= DMA_CTL_STATUS_OWN;
-+	tmp |= DMA_CTL_STATUS_SOP;
-+	tmp |= DMA_CTL_STATUS_EOP;
-+	tmp |= DMA_CTL_STATUS_APPEND_CRC;
-+	if (ring->write_idx + 1 == ring->length - 1)
-+		tmp |= DMA_CTL_STATUS_WRAP;
-+
-+	buf_desc->addr = cpu_to_le32((uint32_t)slot->dma_addr);
-+	buf_desc->ctl = cpu_to_le32(tmp);
-+
-+	bcm4908_enet_dma_tx_ring_ensable(enet, &enet->tx_ring);
-+
-+	if (++ring->write_idx == ring->length - 1)
-+		ring->write_idx = 0;
-+	enet->netdev->stats.tx_bytes += skb->len;
-+	enet->netdev->stats.tx_packets++;
-+
-+	return NETDEV_TX_OK;
-+}
-+
-+static int bcm4908_enet_poll(struct napi_struct *napi, int weight)
-+{
-+	struct bcm4908_enet *enet = container_of(napi, struct bcm4908_enet, napi);
-+	struct device *dev = enet->dev;
-+	int handled = 0;
-+
-+	while (handled < weight) {
-+		struct bcm4908_enet_dma_ring_bd *buf_desc;
-+		struct bcm4908_enet_dma_ring_slot slot;
-+		u32 ctl;
-+		int len;
-+		int err;
-+
-+		buf_desc = &enet->rx_ring.buf_desc[enet->rx_ring.read_idx];
-+		ctl = le32_to_cpu(buf_desc->ctl);
-+		if (ctl & DMA_CTL_STATUS_OWN)
-+			break;
-+
-+		slot = enet->rx_ring.slots[enet->rx_ring.read_idx];
-+
-+		/* Provide new buffer before unpinning the old one */
-+		err = bcm4908_enet_dma_alloc_rx_buf(enet, enet->rx_ring.read_idx);
-+		if (err)
-+			break;
-+
-+		if (++enet->rx_ring.read_idx == enet->rx_ring.length)
-+			enet->rx_ring.read_idx = 0;
-+
-+		len = (ctl & DMA_CTL_LEN_DESC_BUFLENGTH) >> DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+
-+		if (len < ENET_MTU_MIN ||
-+		    (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) {
-+			enet->netdev->stats.rx_dropped++;
-+			break;
-+		}
-+
-+		dma_unmap_single(dev, slot.dma_addr, slot.len, DMA_FROM_DEVICE);
-+
-+		skb_put(slot.skb, len - 4 + 2);
-+		slot.skb->protocol = eth_type_trans(slot.skb, enet->netdev);
-+		netif_receive_skb(slot.skb);
-+
-+		enet->netdev->stats.rx_packets++;
-+		enet->netdev->stats.rx_bytes += len;
-+	}
-+
-+	if (handled < weight) {
-+		napi_complete_done(napi, handled);
-+		bcm4908_enet_intrs_on(enet);
-+	}
-+
-+	return handled;
-+}
-+
-+static const struct net_device_ops bcm96xx_netdev_ops = {
-+	.ndo_open = bcm4908_enet_open,
-+	.ndo_stop = bcm4908_enet_stop,
-+	.ndo_start_xmit = bcm4908_enet_start_xmit,
-+	.ndo_set_mac_address = eth_mac_addr,
-+};
-+
-+static int bcm4908_enet_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct net_device *netdev;
-+	struct bcm4908_enet *enet;
-+	int err;
-+
-+	netdev = devm_alloc_etherdev(dev, sizeof(*enet));
-+	if (!netdev)
-+		return -ENOMEM;
-+
-+	enet = netdev_priv(netdev);
-+	enet->dev = dev;
-+	enet->netdev = netdev;
-+
-+	enet->base = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(enet->base)) {
-+		dev_err(dev, "Failed to map registers: %ld\n", PTR_ERR(enet->base));
-+		return PTR_ERR(enet->base);
-+	}
-+
-+	netdev->irq = platform_get_irq_byname(pdev, "rx");
-+	if (netdev->irq < 0)
-+		return netdev->irq;
-+
-+	dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
-+
-+	err = bcm4908_enet_dma_alloc(enet);
-+	if (err)
-+		return err;
-+
-+	SET_NETDEV_DEV(netdev, &pdev->dev);
-+	eth_hw_addr_random(netdev);
-+	netdev->netdev_ops = &bcm96xx_netdev_ops;
-+	netdev->min_mtu = ETH_ZLEN;
-+	netdev->mtu = ENET_MTU_MAX;
-+	netdev->max_mtu = ENET_MTU_MAX;
-+	netif_napi_add(netdev, &enet->napi, bcm4908_enet_poll, 64);
-+
-+	err = register_netdev(netdev);
-+	if (err) {
-+		bcm4908_enet_dma_free(enet);
-+		return err;
-+	}
-+
-+	platform_set_drvdata(pdev, enet);
-+
-+	return 0;
-+}
-+
-+static int bcm4908_enet_remove(struct platform_device *pdev)
-+{
-+	struct bcm4908_enet *enet = platform_get_drvdata(pdev);
-+
-+	unregister_netdev(enet->netdev);
-+	netif_napi_del(&enet->napi);
-+	bcm4908_enet_dma_free(enet);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id bcm4908_enet_of_match[] = {
-+	{ .compatible = "brcm,bcm4908-enet"},
-+	{},
-+};
-+
-+static struct platform_driver bcm4908_enet_driver = {
-+	.driver = {
-+		.name = "bcm4908_enet",
-+		.of_match_table = bcm4908_enet_of_match,
-+	},
-+	.probe	= bcm4908_enet_probe,
-+	.remove = bcm4908_enet_remove,
-+};
-+module_platform_driver(bcm4908_enet_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DEVICE_TABLE(of, bcm4908_enet_of_match);
---- a/drivers/net/ethernet/broadcom/bcm4908enet.h
-+++ /dev/null
-@@ -1,96 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0-only */
--#ifndef __BCM4908ENET_H
--#define __BCM4908ENET_H
--
--#define ENET_CONTROL					0x000
--#define ENET_MIB_CTRL					0x004
--#define  ENET_MIB_CTRL_CLR_MIB				0x00000001
--#define ENET_RX_ERR_MASK				0x008
--#define ENET_MIB_MAX_PKT_SIZE				0x00C
--#define  ENET_MIB_MAX_PKT_SIZE_VAL			0x00003fff
--#define ENET_DIAG_OUT					0x01c
--#define ENET_ENABLE_DROP_PKT				0x020
--#define ENET_IRQ_ENABLE					0x024
--#define  ENET_IRQ_ENABLE_OVFL				0x00000001
--#define ENET_GMAC_STATUS				0x028
--#define  ENET_GMAC_STATUS_ETH_SPEED_MASK		0x00000003
--#define  ENET_GMAC_STATUS_ETH_SPEED_10			0x00000000
--#define  ENET_GMAC_STATUS_ETH_SPEED_100			0x00000001
--#define  ENET_GMAC_STATUS_ETH_SPEED_1000		0x00000002
--#define  ENET_GMAC_STATUS_HD				0x00000004
--#define  ENET_GMAC_STATUS_AUTO_CFG_EN			0x00000008
--#define  ENET_GMAC_STATUS_LINK_UP			0x00000010
--#define ENET_IRQ_STATUS					0x02c
--#define  ENET_IRQ_STATUS_OVFL				0x00000001
--#define ENET_OVERFLOW_COUNTER				0x030
--#define ENET_FLUSH					0x034
--#define  ENET_FLUSH_RXFIFO_FLUSH			0x00000001
--#define  ENET_FLUSH_TXFIFO_FLUSH			0x00000002
--#define ENET_RSV_SELECT					0x038
--#define ENET_BP_FORCE					0x03c
--#define  ENET_BP_FORCE_FORCE				0x00000001
--#define ENET_DMA_RX_OK_TO_SEND_COUNT			0x040
--#define  ENET_DMA_RX_OK_TO_SEND_COUNT_VAL		0x0000000f
--#define ENET_TX_CRC_CTRL				0x044
--#define ENET_MIB					0x200
--#define ENET_UNIMAC					0x400
--#define ENET_DMA					0x800
--#define ENET_DMA_CONTROLLER_CFG				0x800
--#define  ENET_DMA_CTRL_CFG_MASTER_EN			0x00000001
--#define  ENET_DMA_CTRL_CFG_FLOWC_CH1_EN			0x00000002
--#define  ENET_DMA_CTRL_CFG_FLOWC_CH3_EN			0x00000004
--#define ENET_DMA_FLOWCTL_CH1_THRESH_LO			0x804
--#define ENET_DMA_FLOWCTL_CH1_THRESH_HI			0x808
--#define ENET_DMA_FLOWCTL_CH1_ALLOC			0x80c
--#define  ENET_DMA_FLOWCTL_CH1_ALLOC_FORCE		0x80000000
--#define ENET_DMA_FLOWCTL_CH3_THRESH_LO			0x810
--#define ENET_DMA_FLOWCTL_CH3_THRESH_HI			0x814
--#define ENET_DMA_FLOWCTL_CH3_ALLOC			0x818
--#define ENET_DMA_FLOWCTL_CH5_THRESH_LO			0x81C
--#define ENET_DMA_FLOWCTL_CH5_THRESH_HI			0x820
--#define ENET_DMA_FLOWCTL_CH5_ALLOC			0x824
--#define ENET_DMA_FLOWCTL_CH7_THRESH_LO			0x828
--#define ENET_DMA_FLOWCTL_CH7_THRESH_HI			0x82C
--#define ENET_DMA_FLOWCTL_CH7_ALLOC			0x830
--#define ENET_DMA_CTRL_CHANNEL_RESET			0x834
--#define ENET_DMA_CTRL_CHANNEL_DEBUG			0x838
--#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_STATUS		0x840
--#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_MASK		0x844
--#define ENET_DMA_CH0_CFG				0xa00		/* RX */
--#define ENET_DMA_CH1_CFG				0xa10		/* TX */
--#define ENET_DMA_CH0_STATE_RAM				0xc00		/* RX */
--#define ENET_DMA_CH1_STATE_RAM				0xc10		/* TX */
--
--#define ENET_DMA_CH_CFG					0x00		/* assorted configuration */
--#define  ENET_DMA_CH_CFG_ENABLE				0x00000001	/* set to enable channel */
--#define  ENET_DMA_CH_CFG_PKT_HALT			0x00000002	/* idle after an EOP flag is detected */
--#define  ENET_DMA_CH_CFG_BURST_HALT			0x00000004	/* idle after finish current memory burst */
--#define ENET_DMA_CH_CFG_INT_STAT			0x04		/* interrupts control and status */
--#define ENET_DMA_CH_CFG_INT_MASK			0x08		/* interrupts mask */
--#define  ENET_DMA_CH_CFG_INT_BUFF_DONE			0x00000001	/* buffer done */
--#define  ENET_DMA_CH_CFG_INT_DONE			0x00000002	/* packet xfer complete */
--#define  ENET_DMA_CH_CFG_INT_NO_DESC			0x00000004	/* no valid descriptors */
--#define  ENET_DMA_CH_CFG_INT_RX_ERROR			0x00000008	/* rxdma detect client protocol error */
--#define ENET_DMA_CH_CFG_MAX_BURST			0x0c		/* max burst length permitted */
--#define  ENET_DMA_CH_CFG_MAX_BURST_DESCSIZE_SEL		0x00040000	/* DMA Descriptor Size Selection */
--#define ENET_DMA_CH_CFG_SIZE				0x10
--
--#define ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR		0x00		/* descriptor ring start address */
--#define ENET_DMA_CH_STATE_RAM_STATE_DATA		0x04		/* state/bytes done/ring offset */
--#define ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS		0x08		/* buffer descriptor status and len */
--#define ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR		0x0c		/* buffer descrpitor current processing */
--#define ENET_DMA_CH_STATE_RAM_SIZE			0x10
--
--#define DMA_CTL_STATUS_APPEND_CRC			0x00000100
--#define DMA_CTL_STATUS_APPEND_BRCM_TAG			0x00000200
--#define DMA_CTL_STATUS_PRIO				0x00000C00  /* Prio for Tx */
--#define DMA_CTL_STATUS_WRAP				0x00001000  /* */
--#define DMA_CTL_STATUS_SOP				0x00002000  /* first buffer in packet */
--#define DMA_CTL_STATUS_EOP				0x00004000  /* last buffer in packet */
--#define DMA_CTL_STATUS_OWN				0x00008000  /* cleared by DMA, set by SW */
--#define DMA_CTL_LEN_DESC_BUFLENGTH			0x0fff0000
--#define DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT		16
--#define DMA_CTL_LEN_DESC_MULTICAST			0x40000000
--#define DMA_CTL_LEN_DESC_USEFPM				0x80000000
--
--#endif
---- /dev/null
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.h
-@@ -0,0 +1,96 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+#ifndef __BCM4908_ENET_H
-+#define __BCM4908_ENET_H
-+
-+#define ENET_CONTROL					0x000
-+#define ENET_MIB_CTRL					0x004
-+#define  ENET_MIB_CTRL_CLR_MIB				0x00000001
-+#define ENET_RX_ERR_MASK				0x008
-+#define ENET_MIB_MAX_PKT_SIZE				0x00C
-+#define  ENET_MIB_MAX_PKT_SIZE_VAL			0x00003fff
-+#define ENET_DIAG_OUT					0x01c
-+#define ENET_ENABLE_DROP_PKT				0x020
-+#define ENET_IRQ_ENABLE					0x024
-+#define  ENET_IRQ_ENABLE_OVFL				0x00000001
-+#define ENET_GMAC_STATUS				0x028
-+#define  ENET_GMAC_STATUS_ETH_SPEED_MASK		0x00000003
-+#define  ENET_GMAC_STATUS_ETH_SPEED_10			0x00000000
-+#define  ENET_GMAC_STATUS_ETH_SPEED_100			0x00000001
-+#define  ENET_GMAC_STATUS_ETH_SPEED_1000		0x00000002
-+#define  ENET_GMAC_STATUS_HD				0x00000004
-+#define  ENET_GMAC_STATUS_AUTO_CFG_EN			0x00000008
-+#define  ENET_GMAC_STATUS_LINK_UP			0x00000010
-+#define ENET_IRQ_STATUS					0x02c
-+#define  ENET_IRQ_STATUS_OVFL				0x00000001
-+#define ENET_OVERFLOW_COUNTER				0x030
-+#define ENET_FLUSH					0x034
-+#define  ENET_FLUSH_RXFIFO_FLUSH			0x00000001
-+#define  ENET_FLUSH_TXFIFO_FLUSH			0x00000002
-+#define ENET_RSV_SELECT					0x038
-+#define ENET_BP_FORCE					0x03c
-+#define  ENET_BP_FORCE_FORCE				0x00000001
-+#define ENET_DMA_RX_OK_TO_SEND_COUNT			0x040
-+#define  ENET_DMA_RX_OK_TO_SEND_COUNT_VAL		0x0000000f
-+#define ENET_TX_CRC_CTRL				0x044
-+#define ENET_MIB					0x200
-+#define ENET_UNIMAC					0x400
-+#define ENET_DMA					0x800
-+#define ENET_DMA_CONTROLLER_CFG				0x800
-+#define  ENET_DMA_CTRL_CFG_MASTER_EN			0x00000001
-+#define  ENET_DMA_CTRL_CFG_FLOWC_CH1_EN			0x00000002
-+#define  ENET_DMA_CTRL_CFG_FLOWC_CH3_EN			0x00000004
-+#define ENET_DMA_FLOWCTL_CH1_THRESH_LO			0x804
-+#define ENET_DMA_FLOWCTL_CH1_THRESH_HI			0x808
-+#define ENET_DMA_FLOWCTL_CH1_ALLOC			0x80c
-+#define  ENET_DMA_FLOWCTL_CH1_ALLOC_FORCE		0x80000000
-+#define ENET_DMA_FLOWCTL_CH3_THRESH_LO			0x810
-+#define ENET_DMA_FLOWCTL_CH3_THRESH_HI			0x814
-+#define ENET_DMA_FLOWCTL_CH3_ALLOC			0x818
-+#define ENET_DMA_FLOWCTL_CH5_THRESH_LO			0x81C
-+#define ENET_DMA_FLOWCTL_CH5_THRESH_HI			0x820
-+#define ENET_DMA_FLOWCTL_CH5_ALLOC			0x824
-+#define ENET_DMA_FLOWCTL_CH7_THRESH_LO			0x828
-+#define ENET_DMA_FLOWCTL_CH7_THRESH_HI			0x82C
-+#define ENET_DMA_FLOWCTL_CH7_ALLOC			0x830
-+#define ENET_DMA_CTRL_CHANNEL_RESET			0x834
-+#define ENET_DMA_CTRL_CHANNEL_DEBUG			0x838
-+#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_STATUS		0x840
-+#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_MASK		0x844
-+#define ENET_DMA_CH0_CFG				0xa00		/* RX */
-+#define ENET_DMA_CH1_CFG				0xa10		/* TX */
-+#define ENET_DMA_CH0_STATE_RAM				0xc00		/* RX */
-+#define ENET_DMA_CH1_STATE_RAM				0xc10		/* TX */
-+
-+#define ENET_DMA_CH_CFG					0x00		/* assorted configuration */
-+#define  ENET_DMA_CH_CFG_ENABLE				0x00000001	/* set to enable channel */
-+#define  ENET_DMA_CH_CFG_PKT_HALT			0x00000002	/* idle after an EOP flag is detected */
-+#define  ENET_DMA_CH_CFG_BURST_HALT			0x00000004	/* idle after finish current memory burst */
-+#define ENET_DMA_CH_CFG_INT_STAT			0x04		/* interrupts control and status */
-+#define ENET_DMA_CH_CFG_INT_MASK			0x08		/* interrupts mask */
-+#define  ENET_DMA_CH_CFG_INT_BUFF_DONE			0x00000001	/* buffer done */
-+#define  ENET_DMA_CH_CFG_INT_DONE			0x00000002	/* packet xfer complete */
-+#define  ENET_DMA_CH_CFG_INT_NO_DESC			0x00000004	/* no valid descriptors */
-+#define  ENET_DMA_CH_CFG_INT_RX_ERROR			0x00000008	/* rxdma detect client protocol error */
-+#define ENET_DMA_CH_CFG_MAX_BURST			0x0c		/* max burst length permitted */
-+#define  ENET_DMA_CH_CFG_MAX_BURST_DESCSIZE_SEL		0x00040000	/* DMA Descriptor Size Selection */
-+#define ENET_DMA_CH_CFG_SIZE				0x10
-+
-+#define ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR		0x00		/* descriptor ring start address */
-+#define ENET_DMA_CH_STATE_RAM_STATE_DATA		0x04		/* state/bytes done/ring offset */
-+#define ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS		0x08		/* buffer descriptor status and len */
-+#define ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR		0x0c		/* buffer descrpitor current processing */
-+#define ENET_DMA_CH_STATE_RAM_SIZE			0x10
-+
-+#define DMA_CTL_STATUS_APPEND_CRC			0x00000100
-+#define DMA_CTL_STATUS_APPEND_BRCM_TAG			0x00000200
-+#define DMA_CTL_STATUS_PRIO				0x00000C00  /* Prio for Tx */
-+#define DMA_CTL_STATUS_WRAP				0x00001000  /* */
-+#define DMA_CTL_STATUS_SOP				0x00002000  /* first buffer in packet */
-+#define DMA_CTL_STATUS_EOP				0x00004000  /* last buffer in packet */
-+#define DMA_CTL_STATUS_OWN				0x00008000  /* cleared by DMA, set by SW */
-+#define DMA_CTL_LEN_DESC_BUFLENGTH			0x0fff0000
-+#define DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT		16
-+#define DMA_CTL_LEN_DESC_MULTICAST			0x40000000
-+#define DMA_CTL_LEN_DESC_USEFPM				0x80000000
-+
-+#endif
diff --git a/target/linux/bcm4908/patches-5.4/073-v5.12-0004-net-broadcom-bcm4908_enet-drop-unneeded-memset.patch b/target/linux/bcm4908/patches-5.4/073-v5.12-0004-net-broadcom-bcm4908_enet-drop-unneeded-memset.patch
deleted file mode 100644
index 561f045b75..0000000000
--- a/target/linux/bcm4908/patches-5.4/073-v5.12-0004-net-broadcom-bcm4908_enet-drop-unneeded-memset.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From af263af64683f018be9ce3c309edfa9903f5109a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:35 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: drop unneeded memset()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-dma_alloc_coherent takes care of zeroing allocated memory
-
-Suggested-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -163,8 +163,6 @@ static int bcm4908_dma_alloc_buf_descs(s
- 	if (!ring->slots)
- 		goto err_free_buf_descs;
- 
--	memset(ring->cpu_addr, 0, size);
--
- 	ring->read_idx = 0;
- 	ring->write_idx = 0;
- 
diff --git a/target/linux/bcm4908/patches-5.4/073-v5.12-0005-net-broadcom-bcm4908_enet-drop-inline-from-C-functio.patch b/target/linux/bcm4908/patches-5.4/073-v5.12-0005-net-broadcom-bcm4908_enet-drop-inline-from-C-functio.patch
deleted file mode 100644
index a8c188f30d..0000000000
--- a/target/linux/bcm4908/patches-5.4/073-v5.12-0005-net-broadcom-bcm4908_enet-drop-inline-from-C-functio.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 7b778ae4eb9cd6e1518e4e47902a104b13ae8929 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:36 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: drop "inline" from C functions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It seems preferred to let compiler optimize code if applicable.
-While at it drop unused enet_umac_maskset().
-
-Suggested-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 19 +++++++------------
- 1 file changed, 7 insertions(+), 12 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -75,17 +75,17 @@ struct bcm4908_enet {
-  * R/W ops
-  */
- 
--static inline u32 enet_read(struct bcm4908_enet *enet, u16 offset)
-+static u32 enet_read(struct bcm4908_enet *enet, u16 offset)
- {
- 	return readl(enet->base + offset);
- }
- 
--static inline void enet_write(struct bcm4908_enet *enet, u16 offset, u32 value)
-+static void enet_write(struct bcm4908_enet *enet, u16 offset, u32 value)
- {
- 	writel(value, enet->base + offset);
- }
- 
--static inline void enet_maskset(struct bcm4908_enet *enet, u16 offset, u32 mask, u32 set)
-+static void enet_maskset(struct bcm4908_enet *enet, u16 offset, u32 mask, u32 set)
- {
- 	u32 val;
- 
-@@ -96,27 +96,22 @@ static inline void enet_maskset(struct b
- 	enet_write(enet, offset, val);
- }
- 
--static inline void enet_set(struct bcm4908_enet *enet, u16 offset, u32 set)
-+static void enet_set(struct bcm4908_enet *enet, u16 offset, u32 set)
- {
- 	enet_maskset(enet, offset, set, set);
- }
- 
--static inline u32 enet_umac_read(struct bcm4908_enet *enet, u16 offset)
-+static u32 enet_umac_read(struct bcm4908_enet *enet, u16 offset)
- {
- 	return enet_read(enet, ENET_UNIMAC + offset);
- }
- 
--static inline void enet_umac_write(struct bcm4908_enet *enet, u16 offset, u32 value)
-+static void enet_umac_write(struct bcm4908_enet *enet, u16 offset, u32 value)
- {
- 	enet_write(enet, ENET_UNIMAC + offset, value);
- }
- 
--static inline void enet_umac_maskset(struct bcm4908_enet *enet, u16 offset, u32 mask, u32 set)
--{
--	enet_maskset(enet, ENET_UNIMAC + offset, mask, set);
--}
--
--static inline void enet_umac_set(struct bcm4908_enet *enet, u16 offset, u32 set)
-+static void enet_umac_set(struct bcm4908_enet *enet, u16 offset, u32 set)
- {
- 	enet_set(enet, ENET_UNIMAC + offset, set);
- }
diff --git a/target/linux/bcm4908/patches-5.4/073-v5.12-0006-net-broadcom-bcm4908_enet-fix-minor-typos.patch b/target/linux/bcm4908/patches-5.4/073-v5.12-0006-net-broadcom-bcm4908_enet-fix-minor-typos.patch
deleted file mode 100644
index 1aacb1c8cf..0000000000
--- a/target/linux/bcm4908/patches-5.4/073-v5.12-0006-net-broadcom-bcm4908_enet-fix-minor-typos.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From e3948811720341f99cd5cb4a8a650473400ec4f8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:37 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: fix minor typos
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1. Fix "ensable" typo noticed by Andrew
-2. Fix chipset name in the struct net_device_ops variable
-
-Suggested-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -328,8 +328,8 @@ static int bcm4908_enet_dma_init(struct
- 	return 0;
- }
- 
--static void bcm4908_enet_dma_tx_ring_ensable(struct bcm4908_enet *enet,
--					     struct bcm4908_enet_dma_ring *ring)
-+static void bcm4908_enet_dma_tx_ring_enable(struct bcm4908_enet *enet,
-+					    struct bcm4908_enet_dma_ring *ring)
- {
- 	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
- }
-@@ -519,7 +519,7 @@ static int bcm4908_enet_start_xmit(struc
- 	buf_desc->addr = cpu_to_le32((uint32_t)slot->dma_addr);
- 	buf_desc->ctl = cpu_to_le32(tmp);
- 
--	bcm4908_enet_dma_tx_ring_ensable(enet, &enet->tx_ring);
-+	bcm4908_enet_dma_tx_ring_enable(enet, &enet->tx_ring);
- 
- 	if (++ring->write_idx == ring->length - 1)
- 		ring->write_idx = 0;
-@@ -583,7 +583,7 @@ static int bcm4908_enet_poll(struct napi
- 	return handled;
- }
- 
--static const struct net_device_ops bcm96xx_netdev_ops = {
-+static const struct net_device_ops bcm4908_enet_netdev_ops = {
- 	.ndo_open = bcm4908_enet_open,
- 	.ndo_stop = bcm4908_enet_stop,
- 	.ndo_start_xmit = bcm4908_enet_start_xmit,
-@@ -623,7 +623,7 @@ static int bcm4908_enet_probe(struct pla
- 
- 	SET_NETDEV_DEV(netdev, &pdev->dev);
- 	eth_hw_addr_random(netdev);
--	netdev->netdev_ops = &bcm96xx_netdev_ops;
-+	netdev->netdev_ops = &bcm4908_enet_netdev_ops;
- 	netdev->min_mtu = ETH_ZLEN;
- 	netdev->mtu = ENET_MTU_MAX;
- 	netdev->max_mtu = ENET_MTU_MAX;
diff --git a/target/linux/bcm4908/patches-5.4/073-v5.12-0007-net-broadcom-bcm4908_enet-fix-received-skb-length.patch b/target/linux/bcm4908/patches-5.4/073-v5.12-0007-net-broadcom-bcm4908_enet-fix-received-skb-length.patch
deleted file mode 100644
index 1b51979d71..0000000000
--- a/target/linux/bcm4908/patches-5.4/073-v5.12-0007-net-broadcom-bcm4908_enet-fix-received-skb-length.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 195e2d9febfbeef1d09701c387925e5c2f5cb038 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:38 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: fix received skb length
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use ETH_FCS_LEN instead of magic value and drop incorrect + 2
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -567,7 +567,7 @@ static int bcm4908_enet_poll(struct napi
- 
- 		dma_unmap_single(dev, slot.dma_addr, slot.len, DMA_FROM_DEVICE);
- 
--		skb_put(slot.skb, len - 4 + 2);
-+		skb_put(slot.skb, len - ETH_FCS_LEN);
- 		slot.skb->protocol = eth_type_trans(slot.skb, enet->netdev);
- 		netif_receive_skb(slot.skb);
- 
diff --git a/target/linux/bcm4908/patches-5.4/073-v5.12-0008-net-broadcom-bcm4908_enet-fix-endianness-in-xmit-cod.patch b/target/linux/bcm4908/patches-5.4/073-v5.12-0008-net-broadcom-bcm4908_enet-fix-endianness-in-xmit-cod.patch
deleted file mode 100644
index eda0bf482e..0000000000
--- a/target/linux/bcm4908/patches-5.4/073-v5.12-0008-net-broadcom-bcm4908_enet-fix-endianness-in-xmit-cod.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From bdd70b997799099597fc0952fb0ec1bd80505bc4 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:39 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: fix endianness in xmit code
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use le32_to_cpu() for reading __le32 struct field filled by hw.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -476,7 +476,7 @@ static int bcm4908_enet_start_xmit(struc
- 	/* Free transmitted skbs */
- 	while (ring->read_idx != ring->write_idx) {
- 		buf_desc = &ring->buf_desc[ring->read_idx];
--		if (buf_desc->ctl & DMA_CTL_STATUS_OWN)
-+		if (le32_to_cpu(buf_desc->ctl) & DMA_CTL_STATUS_OWN)
- 			break;
- 		slot = &ring->slots[ring->read_idx];
- 
diff --git a/target/linux/bcm4908/patches-5.4/073-v5.12-0009-net-broadcom-bcm4908_enet-set-MTU-on-open-on-request.patch b/target/linux/bcm4908/patches-5.4/073-v5.12-0009-net-broadcom-bcm4908_enet-set-MTU-on-open-on-request.patch
deleted file mode 100644
index 0201bfeda3..0000000000
--- a/target/linux/bcm4908/patches-5.4/073-v5.12-0009-net-broadcom-bcm4908_enet-set-MTU-on-open-on-request.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From 14b3b46a67f78ade99eafcbf320105615e948569 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 12 Feb 2021 16:21:35 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: set MTU on open & on request
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Hardware comes up with default max frame size set to 1518. When using it
-with switch it results in actual Ethernet MTU 1492:
-1518 - 14 (Ethernet header) - 4 (Broadcom's tag) - 4 (802.1q) - 4 (FCS)
-
-Above means hardware in its default state can't handle standard Ethernet
-traffic (MTU 1500).
-
-Define maximum possible Ethernet overhead and always set MAC max frame
-length accordingly. This change fixes handling Ethernet frames of length
-1506 - 1514.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 31 ++++++++++++++++----
- 1 file changed, 25 insertions(+), 6 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -5,6 +5,7 @@
- 
- #include <linux/delay.h>
- #include <linux/etherdevice.h>
-+#include <linux/if_vlan.h>
- #include <linux/interrupt.h>
- #include <linux/module.h>
- #include <linux/of.h>
-@@ -29,9 +30,10 @@
- 						 ENET_DMA_CH_CFG_INT_BUFF_DONE)
- #define ENET_DMA_MAX_BURST_LEN			8 /* in 64 bit words */
- 
--#define ENET_MTU_MIN				60
--#define ENET_MTU_MAX				1500 /* Is it possible to support 2044? */
--#define ENET_MTU_MAX_EXTRA_SIZE			32 /* L2 */
-+#define ENET_MTU_MAX				ETH_DATA_LEN /* Is it possible to support 2044? */
-+#define BRCM_MAX_TAG_LEN			6
-+#define ENET_MAX_ETH_OVERHEAD			(ETH_HLEN + BRCM_MAX_TAG_LEN + VLAN_HLEN + \
-+						 ETH_FCS_LEN + 4) /* 32 */
- 
- struct bcm4908_enet_dma_ring_bd {
- 	__le32 ctl;
-@@ -135,6 +137,11 @@ static void bcm4908_enet_intrs_ack(struc
- 	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_STAT, ENET_DMA_INT_DEFAULTS);
- }
- 
-+static void bcm4908_enet_set_mtu(struct bcm4908_enet *enet, int mtu)
-+{
-+	enet_umac_write(enet, UMAC_MAX_FRAME_LEN, mtu + ENET_MAX_ETH_OVERHEAD);
-+}
-+
- /***
-  * DMA
-  */
-@@ -246,7 +253,7 @@ static int bcm4908_enet_dma_alloc_rx_buf
- 	u32 tmp;
- 	int err;
- 
--	slot->len = ENET_MTU_MAX + ENET_MTU_MAX_EXTRA_SIZE;
-+	slot->len = ENET_MTU_MAX + ENET_MAX_ETH_OVERHEAD;
- 
- 	slot->skb = netdev_alloc_skb(enet->netdev, slot->len);
- 	if (!slot->skb)
-@@ -374,6 +381,8 @@ static void bcm4908_enet_gmac_init(struc
- {
- 	u32 cmd;
- 
-+	bcm4908_enet_set_mtu(enet, enet->netdev->mtu);
-+
- 	cmd = enet_umac_read(enet, UMAC_CMD);
- 	enet_umac_write(enet, UMAC_CMD, cmd | CMD_SW_RESET);
- 	enet_umac_write(enet, UMAC_CMD, cmd & ~CMD_SW_RESET);
-@@ -559,7 +568,7 @@ static int bcm4908_enet_poll(struct napi
- 
- 		len = (ctl & DMA_CTL_LEN_DESC_BUFLENGTH) >> DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
- 
--		if (len < ENET_MTU_MIN ||
-+		if (len < ETH_ZLEN ||
- 		    (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) {
- 			enet->netdev->stats.rx_dropped++;
- 			break;
-@@ -583,11 +592,21 @@ static int bcm4908_enet_poll(struct napi
- 	return handled;
- }
- 
-+static int bcm4908_enet_change_mtu(struct net_device *netdev, int new_mtu)
-+{
-+	struct bcm4908_enet *enet = netdev_priv(netdev);
-+
-+	bcm4908_enet_set_mtu(enet, new_mtu);
-+
-+	return 0;
-+}
-+
- static const struct net_device_ops bcm4908_enet_netdev_ops = {
- 	.ndo_open = bcm4908_enet_open,
- 	.ndo_stop = bcm4908_enet_stop,
- 	.ndo_start_xmit = bcm4908_enet_start_xmit,
- 	.ndo_set_mac_address = eth_mac_addr,
-+	.ndo_change_mtu = bcm4908_enet_change_mtu,
- };
- 
- static int bcm4908_enet_probe(struct platform_device *pdev)
-@@ -625,7 +644,7 @@ static int bcm4908_enet_probe(struct pla
- 	eth_hw_addr_random(netdev);
- 	netdev->netdev_ops = &bcm4908_enet_netdev_ops;
- 	netdev->min_mtu = ETH_ZLEN;
--	netdev->mtu = ENET_MTU_MAX;
-+	netdev->mtu = ETH_DATA_LEN;
- 	netdev->max_mtu = ENET_MTU_MAX;
- 	netif_napi_add(netdev, &enet->napi, bcm4908_enet_poll, 64);
- 
diff --git a/target/linux/bcm4908/patches-5.4/073-v5.12-0010-net-broadcom-bcm4908_enet-fix-RX-path-possible-mem-l.patch b/target/linux/bcm4908/patches-5.4/073-v5.12-0010-net-broadcom-bcm4908_enet-fix-RX-path-possible-mem-l.patch
deleted file mode 100644
index 8a24324122..0000000000
--- a/target/linux/bcm4908/patches-5.4/073-v5.12-0010-net-broadcom-bcm4908_enet-fix-RX-path-possible-mem-l.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 4dc7f09b8becfa35a55430a49d95acf19f996e6b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 24 Feb 2021 16:18:41 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: fix RX path possible mem leak
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-After filling RX ring slot with new skb it's required to free old skb.
-Immediately on error or later in the net subsystem.
-
-Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20210224151842.2419-1-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -570,6 +570,7 @@ static int bcm4908_enet_poll(struct napi
- 
- 		if (len < ETH_ZLEN ||
- 		    (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) {
-+			kfree_skb(slot.skb);
- 			enet->netdev->stats.rx_dropped++;
- 			break;
- 		}
diff --git a/target/linux/bcm4908/patches-5.4/073-v5.12-0011-net-broadcom-bcm4908_enet-fix-NAPI-poll-returned-val.patch b/target/linux/bcm4908/patches-5.4/073-v5.12-0011-net-broadcom-bcm4908_enet-fix-NAPI-poll-returned-val.patch
deleted file mode 100644
index d4cf84e4b6..0000000000
--- a/target/linux/bcm4908/patches-5.4/073-v5.12-0011-net-broadcom-bcm4908_enet-fix-NAPI-poll-returned-val.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 4d9274cee40b6a20dd6148c6c81c6733c2678cbc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 24 Feb 2021 16:18:42 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: fix NAPI poll returned value
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Missing increment was resulting in poll function always returning 0
-instead of amount of processed packets.
-
-Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20210224151842.2419-2-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -583,6 +583,8 @@ static int bcm4908_enet_poll(struct napi
- 
- 		enet->netdev->stats.rx_packets++;
- 		enet->netdev->stats.rx_bytes += len;
-+
-+		handled++;
- 	}
- 
- 	if (handled < weight) {
diff --git a/target/linux/bcm4908/patches-5.4/073-v5.12-0012-net-broadcom-bcm4908_enet-enable-RX-after-processing.patch b/target/linux/bcm4908/patches-5.4/073-v5.12-0012-net-broadcom-bcm4908_enet-enable-RX-after-processing.patch
deleted file mode 100644
index ad1bebf3ec..0000000000
--- a/target/linux/bcm4908/patches-5.4/073-v5.12-0012-net-broadcom-bcm4908_enet-enable-RX-after-processing.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From d313d16bbaea0f11a2e98f04a6c678b43c208915 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 26 Feb 2021 14:20:38 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: enable RX after processing
- packets
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When receiving a lot of packets hardware may run out of free
-descriptiors and stop RX ring. Enable it every time after handling
-received packets.
-
-Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20210226132038.29849-1-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -592,6 +592,9 @@ static int bcm4908_enet_poll(struct napi
- 		bcm4908_enet_intrs_on(enet);
- 	}
- 
-+	/* Hardware could disable ring if it run out of descriptors */
-+	bcm4908_enet_dma_rx_ring_enable(enet, &enet->rx_ring);
-+
- 	return handled;
- }
- 
diff --git a/target/linux/bcm4908/patches-5.4/073-v5.12-0013-net-broadcom-BCM4908_ENET-should-not-default-to-y-un.patch b/target/linux/bcm4908/patches-5.4/073-v5.12-0013-net-broadcom-BCM4908_ENET-should-not-default-to-y-un.patch
deleted file mode 100644
index 43e5ee01bf..0000000000
--- a/target/linux/bcm4908/patches-5.4/073-v5.12-0013-net-broadcom-BCM4908_ENET-should-not-default-to-y-un.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From a3bc483216650a7232559bf0a1debfbabff3e12c Mon Sep 17 00:00:00 2001
-From: Geert Uytterhoeven <geert+renesas@glider.be>
-Date: Tue, 16 Mar 2021 15:03:41 +0100
-Subject: [PATCH] net: broadcom: BCM4908_ENET should not default to y,
- unconditionally
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Merely enabling compile-testing should not enable additional code.
-To fix this, restrict the automatic enabling of BCM4908_ENET to
-ARCH_BCM4908.
-
-Fixes: 4feffeadbcb2e5b1 ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
-Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/Kconfig
-+++ b/drivers/net/ethernet/broadcom/Kconfig
-@@ -54,7 +54,7 @@ config B44_PCI
- config BCM4908_ENET
- 	tristate "Broadcom BCM4908 internal mac support"
- 	depends on ARCH_BCM4908 || COMPILE_TEST
--	default y
-+	default y if ARCH_BCM4908
- 	help
- 	  This driver supports Ethernet controller integrated into Broadcom
- 	  BCM4908 family SoCs.
diff --git a/target/linux/bcm4908/patches-5.4/074-v5.13-0001-net-broadcom-bcm4908_enet-read-MAC-from-OF.patch b/target/linux/bcm4908/patches-5.4/074-v5.13-0001-net-broadcom-bcm4908_enet-read-MAC-from-OF.patch
deleted file mode 100644
index c4f336e671..0000000000
--- a/target/linux/bcm4908/patches-5.4/074-v5.13-0001-net-broadcom-bcm4908_enet-read-MAC-from-OF.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 3559c1ea4336636c886002996d50805365d3055c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 10 Mar 2021 09:48:13 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: read MAC from OF
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 devices have MAC address accessible using NVMEM so it's needed
-to use OF helper for reading it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -9,6 +9,7 @@
- #include <linux/interrupt.h>
- #include <linux/module.h>
- #include <linux/of.h>
-+#include <linux/of_net.h>
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- #include <linux/string.h>
-@@ -647,7 +648,9 @@ static int bcm4908_enet_probe(struct pla
- 		return err;
- 
- 	SET_NETDEV_DEV(netdev, &pdev->dev);
--	eth_hw_addr_random(netdev);
-+	of_get_mac_address(dev->of_node, netdev->dev_addr);
-+	if (!is_valid_ether_addr(netdev->dev_addr))
-+		eth_hw_addr_random(netdev);
- 	netdev->netdev_ops = &bcm4908_enet_netdev_ops;
- 	netdev->min_mtu = ETH_ZLEN;
- 	netdev->mtu = ETH_DATA_LEN;
diff --git a/target/linux/bcm4908/patches-5.4/074-v5.13-0002-dt-bindings-net-bcm4908-enet-add-optional-TX-interru.patch b/target/linux/bcm4908/patches-5.4/074-v5.13-0002-dt-bindings-net-bcm4908-enet-add-optional-TX-interru.patch
deleted file mode 100644
index b61437a2de..0000000000
--- a/target/linux/bcm4908/patches-5.4/074-v5.13-0002-dt-bindings-net-bcm4908-enet-add-optional-TX-interru.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From ab4dda7a8cb7e55ea3d92fd5e249cf6f5396028c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Mar 2021 13:35:20 +0100
-Subject: [PATCH] dt-bindings: net: bcm4908-enet: add optional TX interrupt
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-I discovered that hardware actually supports two interrupts, one per DMA
-channel (RX and TX).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- .../bindings/net/brcm,bcm4908-enet.yaml         | 17 +++++++++++++----
- 1 file changed, 13 insertions(+), 4 deletions(-)
-
---- a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
-+++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
-@@ -22,10 +22,18 @@ properties:
-     maxItems: 1
- 
-   interrupts:
--    description: RX interrupt
-+    minItems: 1
-+    maxItems: 2
-+    items:
-+      - description: RX interrupt
-+      - description: TX interrupt
- 
-   interrupt-names:
--    const: rx
-+    minItems: 1
-+    maxItems: 2
-+    items:
-+      - const: rx
-+      - const: tx
- 
- required:
-   - reg
-@@ -43,6 +51,7 @@ examples:
-         compatible = "brcm,bcm4908-enet";
-         reg = <0x80002000 0x1000>;
- 
--        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
--        interrupt-names = "rx";
-+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-+                     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-+        interrupt-names = "rx", "tx";
-     };
diff --git a/target/linux/bcm4908/patches-5.4/074-v5.13-0003-net-broadcom-bcm4908_enet-support-TX-interrupt.patch b/target/linux/bcm4908/patches-5.4/074-v5.13-0003-net-broadcom-bcm4908_enet-support-TX-interrupt.patch
deleted file mode 100644
index 03ac4b07bf..0000000000
--- a/target/linux/bcm4908/patches-5.4/074-v5.13-0003-net-broadcom-bcm4908_enet-support-TX-interrupt.patch
+++ /dev/null
@@ -1,300 +0,0 @@
-From 12bb508bfe5a564c36864b12253db23cac83bfa1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Mar 2021 13:35:21 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: support TX interrupt
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It appears that each DMA channel has its own interrupt and both rings
-can be configured (the same way) to handle interrupts.
-
-1. Make ring interrupts code generic (make it operate on given ring)
-2. Move napi to ring (so each has its own)
-3. Make IRQ handler generic (match ring against received IRQ number)
-4. Add (optional) support for TX interrupt
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 138 ++++++++++++++-----
- 1 file changed, 103 insertions(+), 35 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -54,6 +54,7 @@ struct bcm4908_enet_dma_ring {
- 	int length;
- 	u16 cfg_block;
- 	u16 st_ram_block;
-+	struct napi_struct napi;
- 
- 	union {
- 		void *cpu_addr;
-@@ -67,8 +68,8 @@ struct bcm4908_enet_dma_ring {
- struct bcm4908_enet {
- 	struct device *dev;
- 	struct net_device *netdev;
--	struct napi_struct napi;
- 	void __iomem *base;
-+	int irq_tx;
- 
- 	struct bcm4908_enet_dma_ring tx_ring;
- 	struct bcm4908_enet_dma_ring rx_ring;
-@@ -123,24 +124,31 @@ static void enet_umac_set(struct bcm4908
-  * Helpers
-  */
- 
--static void bcm4908_enet_intrs_on(struct bcm4908_enet *enet)
-+static void bcm4908_enet_set_mtu(struct bcm4908_enet *enet, int mtu)
- {
--	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, ENET_DMA_INT_DEFAULTS);
-+	enet_umac_write(enet, UMAC_MAX_FRAME_LEN, mtu + ENET_MAX_ETH_OVERHEAD);
- }
- 
--static void bcm4908_enet_intrs_off(struct bcm4908_enet *enet)
-+/***
-+ * DMA ring ops
-+ */
-+
-+static void bcm4908_enet_dma_ring_intrs_on(struct bcm4908_enet *enet,
-+					   struct bcm4908_enet_dma_ring *ring)
- {
--	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, 0);
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_INT_MASK, ENET_DMA_INT_DEFAULTS);
- }
- 
--static void bcm4908_enet_intrs_ack(struct bcm4908_enet *enet)
-+static void bcm4908_enet_dma_ring_intrs_off(struct bcm4908_enet *enet,
-+					    struct bcm4908_enet_dma_ring *ring)
- {
--	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_STAT, ENET_DMA_INT_DEFAULTS);
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_INT_MASK, 0);
- }
- 
--static void bcm4908_enet_set_mtu(struct bcm4908_enet *enet, int mtu)
-+static void bcm4908_enet_dma_ring_intrs_ack(struct bcm4908_enet *enet,
-+					    struct bcm4908_enet_dma_ring *ring)
- {
--	enet_umac_write(enet, UMAC_MAX_FRAME_LEN, mtu + ENET_MAX_ETH_OVERHEAD);
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_INT_STAT, ENET_DMA_INT_DEFAULTS);
- }
- 
- /***
-@@ -414,11 +422,14 @@ static void bcm4908_enet_gmac_init(struc
- static irqreturn_t bcm4908_enet_irq_handler(int irq, void *dev_id)
- {
- 	struct bcm4908_enet *enet = dev_id;
-+	struct bcm4908_enet_dma_ring *ring;
- 
--	bcm4908_enet_intrs_off(enet);
--	bcm4908_enet_intrs_ack(enet);
-+	ring = (irq == enet->irq_tx) ? &enet->tx_ring : &enet->rx_ring;
- 
--	napi_schedule(&enet->napi);
-+	bcm4908_enet_dma_ring_intrs_off(enet, ring);
-+	bcm4908_enet_dma_ring_intrs_ack(enet, ring);
-+
-+	napi_schedule(&ring->napi);
- 
- 	return IRQ_HANDLED;
- }
-@@ -426,6 +437,8 @@ static irqreturn_t bcm4908_enet_irq_hand
- static int bcm4908_enet_open(struct net_device *netdev)
- {
- 	struct bcm4908_enet *enet = netdev_priv(netdev);
-+	struct bcm4908_enet_dma_ring *tx_ring = &enet->tx_ring;
-+	struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
- 	struct device *dev = enet->dev;
- 	int err;
- 
-@@ -435,6 +448,17 @@ static int bcm4908_enet_open(struct net_
- 		return err;
- 	}
- 
-+	if (enet->irq_tx > 0) {
-+		err = request_irq(enet->irq_tx, bcm4908_enet_irq_handler, 0,
-+				  "tx", enet);
-+		if (err) {
-+			dev_err(dev, "Failed to request IRQ %d: %d\n",
-+				enet->irq_tx, err);
-+			free_irq(netdev->irq, enet);
-+			return err;
-+		}
-+	}
-+
- 	bcm4908_enet_gmac_init(enet);
- 	bcm4908_enet_dma_reset(enet);
- 	bcm4908_enet_dma_init(enet);
-@@ -443,14 +467,19 @@ static int bcm4908_enet_open(struct net_
- 
- 	enet_set(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN);
- 	enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_FLOWC_CH1_EN, 0);
--	bcm4908_enet_dma_rx_ring_enable(enet, &enet->rx_ring);
- 
--	napi_enable(&enet->napi);
-+	if (enet->irq_tx > 0) {
-+		napi_enable(&tx_ring->napi);
-+		bcm4908_enet_dma_ring_intrs_ack(enet, tx_ring);
-+		bcm4908_enet_dma_ring_intrs_on(enet, tx_ring);
-+	}
-+
-+	bcm4908_enet_dma_rx_ring_enable(enet, rx_ring);
-+	napi_enable(&rx_ring->napi);
- 	netif_carrier_on(netdev);
- 	netif_start_queue(netdev);
--
--	bcm4908_enet_intrs_ack(enet);
--	bcm4908_enet_intrs_on(enet);
-+	bcm4908_enet_dma_ring_intrs_ack(enet, rx_ring);
-+	bcm4908_enet_dma_ring_intrs_on(enet, rx_ring);
- 
- 	return 0;
- }
-@@ -458,16 +487,20 @@ static int bcm4908_enet_open(struct net_
- static int bcm4908_enet_stop(struct net_device *netdev)
- {
- 	struct bcm4908_enet *enet = netdev_priv(netdev);
-+	struct bcm4908_enet_dma_ring *tx_ring = &enet->tx_ring;
-+	struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
- 
- 	netif_stop_queue(netdev);
- 	netif_carrier_off(netdev);
--	napi_disable(&enet->napi);
-+	napi_disable(&rx_ring->napi);
-+	napi_disable(&tx_ring->napi);
- 
- 	bcm4908_enet_dma_rx_ring_disable(enet, &enet->rx_ring);
- 	bcm4908_enet_dma_tx_ring_disable(enet, &enet->tx_ring);
- 
- 	bcm4908_enet_dma_uninit(enet);
- 
-+	free_irq(enet->irq_tx, enet);
- 	free_irq(enet->netdev->irq, enet);
- 
- 	return 0;
-@@ -484,25 +517,19 @@ static int bcm4908_enet_start_xmit(struc
- 	u32 tmp;
- 
- 	/* Free transmitted skbs */
--	while (ring->read_idx != ring->write_idx) {
--		buf_desc = &ring->buf_desc[ring->read_idx];
--		if (le32_to_cpu(buf_desc->ctl) & DMA_CTL_STATUS_OWN)
--			break;
--		slot = &ring->slots[ring->read_idx];
--
--		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
--		dev_kfree_skb(slot->skb);
--		if (++ring->read_idx == ring->length)
--			ring->read_idx = 0;
--	}
-+	if (enet->irq_tx < 0 &&
-+	    !(le32_to_cpu(ring->buf_desc[ring->read_idx].ctl) & DMA_CTL_STATUS_OWN))
-+		napi_schedule(&enet->tx_ring.napi);
- 
- 	/* Don't use the last empty buf descriptor */
- 	if (ring->read_idx <= ring->write_idx)
- 		free_buf_descs = ring->read_idx - ring->write_idx + ring->length;
- 	else
- 		free_buf_descs = ring->read_idx - ring->write_idx;
--	if (free_buf_descs < 2)
-+	if (free_buf_descs < 2) {
-+		netif_stop_queue(netdev);
- 		return NETDEV_TX_BUSY;
-+	}
- 
- 	/* Hardware removes OWN bit after sending data */
- 	buf_desc = &ring->buf_desc[ring->write_idx];
-@@ -539,9 +566,10 @@ static int bcm4908_enet_start_xmit(struc
- 	return NETDEV_TX_OK;
- }
- 
--static int bcm4908_enet_poll(struct napi_struct *napi, int weight)
-+static int bcm4908_enet_poll_rx(struct napi_struct *napi, int weight)
- {
--	struct bcm4908_enet *enet = container_of(napi, struct bcm4908_enet, napi);
-+	struct bcm4908_enet_dma_ring *rx_ring = container_of(napi, struct bcm4908_enet_dma_ring, napi);
-+	struct bcm4908_enet *enet = container_of(rx_ring, struct bcm4908_enet, rx_ring);
- 	struct device *dev = enet->dev;
- 	int handled = 0;
- 
-@@ -590,7 +618,7 @@ static int bcm4908_enet_poll(struct napi
- 
- 	if (handled < weight) {
- 		napi_complete_done(napi, handled);
--		bcm4908_enet_intrs_on(enet);
-+		bcm4908_enet_dma_ring_intrs_on(enet, rx_ring);
- 	}
- 
- 	/* Hardware could disable ring if it run out of descriptors */
-@@ -599,6 +627,42 @@ static int bcm4908_enet_poll(struct napi
- 	return handled;
- }
- 
-+static int bcm4908_enet_poll_tx(struct napi_struct *napi, int weight)
-+{
-+	struct bcm4908_enet_dma_ring *tx_ring = container_of(napi, struct bcm4908_enet_dma_ring, napi);
-+	struct bcm4908_enet *enet = container_of(tx_ring, struct bcm4908_enet, tx_ring);
-+	struct bcm4908_enet_dma_ring_bd *buf_desc;
-+	struct bcm4908_enet_dma_ring_slot *slot;
-+	struct device *dev = enet->dev;
-+	unsigned int bytes = 0;
-+	int handled = 0;
-+
-+	while (handled < weight && tx_ring->read_idx != tx_ring->write_idx) {
-+		buf_desc = &tx_ring->buf_desc[tx_ring->read_idx];
-+		if (le32_to_cpu(buf_desc->ctl) & DMA_CTL_STATUS_OWN)
-+			break;
-+		slot = &tx_ring->slots[tx_ring->read_idx];
-+
-+		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
-+		dev_kfree_skb(slot->skb);
-+		bytes += slot->len;
-+		if (++tx_ring->read_idx == tx_ring->length)
-+			tx_ring->read_idx = 0;
-+
-+		handled++;
-+	}
-+
-+	if (handled < weight) {
-+		napi_complete_done(napi, handled);
-+		bcm4908_enet_dma_ring_intrs_on(enet, tx_ring);
-+	}
-+
-+	if (netif_queue_stopped(enet->netdev))
-+		netif_wake_queue(enet->netdev);
-+
-+	return handled;
-+}
-+
- static int bcm4908_enet_change_mtu(struct net_device *netdev, int new_mtu)
- {
- 	struct bcm4908_enet *enet = netdev_priv(netdev);
-@@ -641,6 +705,8 @@ static int bcm4908_enet_probe(struct pla
- 	if (netdev->irq < 0)
- 		return netdev->irq;
- 
-+	enet->irq_tx = platform_get_irq_byname(pdev, "tx");
-+
- 	dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
- 
- 	err = bcm4908_enet_dma_alloc(enet);
-@@ -655,7 +721,8 @@ static int bcm4908_enet_probe(struct pla
- 	netdev->min_mtu = ETH_ZLEN;
- 	netdev->mtu = ETH_DATA_LEN;
- 	netdev->max_mtu = ENET_MTU_MAX;
--	netif_napi_add(netdev, &enet->napi, bcm4908_enet_poll, 64);
-+	netif_tx_napi_add(netdev, &enet->tx_ring.napi, bcm4908_enet_poll_tx, NAPI_POLL_WEIGHT);
-+	netif_napi_add(netdev, &enet->rx_ring.napi, bcm4908_enet_poll_rx, NAPI_POLL_WEIGHT);
- 
- 	err = register_netdev(netdev);
- 	if (err) {
-@@ -673,7 +740,8 @@ static int bcm4908_enet_remove(struct pl
- 	struct bcm4908_enet *enet = platform_get_drvdata(pdev);
- 
- 	unregister_netdev(enet->netdev);
--	netif_napi_del(&enet->napi);
-+	netif_napi_del(&enet->rx_ring.napi);
-+	netif_napi_del(&enet->tx_ring.napi);
- 	bcm4908_enet_dma_free(enet);
- 
- 	return 0;
diff --git a/target/linux/bcm4908/patches-5.4/075-v5.13-0001-net-dsa-bcm_sf2-store-PHY-interface-mode-in-port-str.patch b/target/linux/bcm4908/patches-5.4/075-v5.13-0001-net-dsa-bcm_sf2-store-PHY-interface-mode-in-port-str.patch
deleted file mode 100644
index 69bf2d0d2f..0000000000
--- a/target/linux/bcm4908/patches-5.4/075-v5.13-0001-net-dsa-bcm_sf2-store-PHY-interface-mode-in-port-str.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From 01488a0ccd9abe15565bed50a45afcddbb0fe199 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 12 Mar 2021 11:41:07 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: store PHY interface/mode in port structure
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's needed later for proper switch / crossbar setup.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/bcm_sf2.c | 16 ++++++++++++----
- drivers/net/dsa/bcm_sf2.h |  1 +
- 2 files changed, 13 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -380,8 +380,9 @@ static void bcm_sf2_intr_disable(struct
- static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv,
- 				   struct device_node *dn)
- {
-+	struct device *dev = priv->dev->ds->dev;
-+	struct bcm_sf2_port_status *port_st;
- 	struct device_node *port;
--	int mode;
- 	unsigned int port_num;
- 
- 	priv->moca_port = -1;
-@@ -390,19 +391,26 @@ static void bcm_sf2_identify_ports(struc
- 		if (of_property_read_u32(port, "reg", &port_num))
- 			continue;
- 
-+		if (port_num >= DSA_MAX_PORTS) {
-+			dev_err(dev, "Invalid port number %d\n", port_num);
-+			continue;
-+		}
-+
-+		port_st = &priv->port_sts[port_num];
-+
- 		/* Internal PHYs get assigned a specific 'phy-mode' property
- 		 * value: "internal" to help flag them before MDIO probing
- 		 * has completed, since they might be turned off at that
- 		 * time
- 		 */
--		mode = of_get_phy_mode(port);
--		if (mode < 0)
-+		port_st->mode = of_get_phy_mode(port);
-+		if (port_st->mode < 0)
- 			continue;
- 
--		if (mode == PHY_INTERFACE_MODE_INTERNAL)
-+		if (port_st->mode == PHY_INTERFACE_MODE_INTERNAL)
- 			priv->int_phy_mask |= 1 << port_num;
- 
--		if (mode == PHY_INTERFACE_MODE_MOCA)
-+		if (port_st->mode == PHY_INTERFACE_MODE_MOCA)
- 			priv->moca_port = port_num;
- 
- 		if (of_property_read_bool(port, "brcm,use-bcm-hdr"))
---- a/drivers/net/dsa/bcm_sf2.h
-+++ b/drivers/net/dsa/bcm_sf2.h
-@@ -43,6 +43,7 @@ struct bcm_sf2_hw_params {
- #define BCM_SF2_REGS_NUM	6
- 
- struct bcm_sf2_port_status {
-+	int mode;
- 	unsigned int link;
- };
- 
diff --git a/target/linux/bcm4908/patches-5.4/075-v5.13-0002-net-dsa-bcm_sf2-setup-BCM4908-internal-crossbar.patch b/target/linux/bcm4908/patches-5.4/075-v5.13-0002-net-dsa-bcm_sf2-setup-BCM4908-internal-crossbar.patch
deleted file mode 100644
index b0626ba71e..0000000000
--- a/target/linux/bcm4908/patches-5.4/075-v5.13-0002-net-dsa-bcm_sf2-setup-BCM4908-internal-crossbar.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-From a9349f08ec6c1251d41ef167d27a15cc39bc5b97 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 12 Mar 2021 11:41:08 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: setup BCM4908 internal crossbar
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On some SoCs (e.g. BCM4908, BCM631[345]8) SF2 has an integrated
-crossbar. It allows connecting its selected external ports to internal
-ports. It's used by vendors to handle custom Ethernet setups.
-
-BCM4908 has following 3x2 crossbar. On Asus GT-AC5300 rgmii is used for
-connecting external BCM53134S switch. GPHY4 is usually used for WAN
-port. More fancy devices use SerDes for 2.5 Gbps Ethernet.
-
-              ┌──────────�
-SerDes ─── 0 ─┤          │
-              │   3x2    ├─ 0 ─── switch port 7
- GPHY4 ─── 1 ─┤          │
-              │ crossbar ├─ 1 ─── runner (accelerator)
- rgmii ─── 2 ─┤          │
-              └──────────┘
-
-Use setup data based on DT info to configure BCM4908's switch port 7.
-Right now only GPHY and rgmii variants are supported. Handling SerDes
-can be implemented later.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/bcm_sf2.c      | 45 ++++++++++++++++++++++++++++++++++
- drivers/net/dsa/bcm_sf2.h      |  1 +
- drivers/net/dsa/bcm_sf2_regs.h |  7 ++++++
- 3 files changed, 53 insertions(+)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -369,6 +369,44 @@ static int bcm_sf2_sw_rst(struct bcm_sf2
- 	return 0;
- }
- 
-+static void bcm_sf2_crossbar_setup(struct bcm_sf2_priv *priv)
-+{
-+	struct device *dev = priv->dev->ds->dev;
-+	int shift;
-+	u32 mask;
-+	u32 reg;
-+	int i;
-+
-+	mask = BIT(priv->num_crossbar_int_ports) - 1;
-+
-+	reg = reg_readl(priv, REG_CROSSBAR);
-+	switch (priv->type) {
-+	case BCM4908_DEVICE_ID:
-+		shift = CROSSBAR_BCM4908_INT_P7 * priv->num_crossbar_int_ports;
-+		reg &= ~(mask << shift);
-+		if (0) /* FIXME */
-+			reg |= CROSSBAR_BCM4908_EXT_SERDES << shift;
-+		else if (priv->int_phy_mask & BIT(7))
-+			reg |= CROSSBAR_BCM4908_EXT_GPHY4 << shift;
-+		else if (phy_interface_mode_is_rgmii(priv->port_sts[7].mode))
-+			reg |= CROSSBAR_BCM4908_EXT_RGMII << shift;
-+		else if (WARN(1, "Invalid port mode\n"))
-+			return;
-+		break;
-+	default:
-+		return;
-+	}
-+	reg_writel(priv, reg, REG_CROSSBAR);
-+
-+	reg = reg_readl(priv, REG_CROSSBAR);
-+	for (i = 0; i < priv->num_crossbar_int_ports; i++) {
-+		shift = i * priv->num_crossbar_int_ports;
-+
-+		dev_dbg(dev, "crossbar int port #%d - ext port #%d\n", i,
-+			(reg >> shift) & mask);
-+	}
-+}
-+
- static void bcm_sf2_intr_disable(struct bcm_sf2_priv *priv)
- {
- 	intrl2_0_mask_set(priv, 0xffffffff);
-@@ -734,6 +772,8 @@ static int bcm_sf2_sw_resume(struct dsa_
- 		return ret;
- 	}
- 
-+	bcm_sf2_crossbar_setup(priv);
-+
- 	ret = bcm_sf2_cfp_resume(ds);
- 	if (ret)
- 		return ret;
-@@ -996,6 +1036,7 @@ struct bcm_sf2_of_data {
- 	const u16 *reg_offsets;
- 	unsigned int core_reg_align;
- 	unsigned int num_cfp_rules;
-+	unsigned int num_crossbar_int_ports;
- };
- 
- static const u16 bcm_sf2_4908_reg_offsets[] = {
-@@ -1020,6 +1061,7 @@ static const struct bcm_sf2_of_data bcm_
- 	.core_reg_align	= 0,
- 	.reg_offsets	= bcm_sf2_4908_reg_offsets,
- 	.num_cfp_rules	= 0, /* FIXME */
-+	.num_crossbar_int_ports = 2,
- };
- 
- /* Register offsets for the SWITCH_REG_* block */
-@@ -1130,6 +1172,7 @@ static int bcm_sf2_sw_probe(struct platf
- 	priv->reg_offsets = data->reg_offsets;
- 	priv->core_reg_align = data->core_reg_align;
- 	priv->num_cfp_rules = data->num_cfp_rules;
-+	priv->num_crossbar_int_ports = data->num_crossbar_int_ports;
- 
- 	/* Auto-detection using standard registers will not work, so
- 	 * provide an indication of what kind of device we are for
-@@ -1184,6 +1227,8 @@ static int bcm_sf2_sw_probe(struct platf
- 		return ret;
- 	}
- 
-+	bcm_sf2_crossbar_setup(priv);
-+
- 	bcm_sf2_gphy_enable_set(priv->dev->ds, true);
- 
- 	ret = bcm_sf2_mdio_register(ds);
---- a/drivers/net/dsa/bcm_sf2.h
-+++ b/drivers/net/dsa/bcm_sf2.h
-@@ -70,6 +70,7 @@ struct bcm_sf2_priv {
- 	const u16			*reg_offsets;
- 	unsigned int			core_reg_align;
- 	unsigned int			num_cfp_rules;
-+	unsigned int			num_crossbar_int_ports;
- 
- 	/* spinlock protecting access to the indirect registers */
- 	spinlock_t			indir_lock;
---- a/drivers/net/dsa/bcm_sf2_regs.h
-+++ b/drivers/net/dsa/bcm_sf2_regs.h
-@@ -48,6 +48,13 @@ enum bcm_sf2_reg_offs {
- #define  PHY_PHYAD_SHIFT		8
- #define  PHY_PHYAD_MASK			0x1F
- 
-+/* Relative to REG_CROSSBAR */
-+#define CROSSBAR_BCM4908_INT_P7		0
-+#define CROSSBAR_BCM4908_INT_RUNNER	1
-+#define CROSSBAR_BCM4908_EXT_SERDES	0
-+#define CROSSBAR_BCM4908_EXT_GPHY4	1
-+#define CROSSBAR_BCM4908_EXT_RGMII	2
-+
- #define REG_RGMII_CNTRL_P(x)		(REG_RGMII_0_CNTRL + (x))
- 
- /* Relative to REG_RGMII_CNTRL */
diff --git a/target/linux/bcm4908/patches-5.4/075-v5.13-0003-net-dsa-bcm_sf2-Fill-in-BCM4908-CFP-entries.patch b/target/linux/bcm4908/patches-5.4/075-v5.13-0003-net-dsa-bcm_sf2-Fill-in-BCM4908-CFP-entries.patch
deleted file mode 100644
index 06d631f691..0000000000
--- a/target/linux/bcm4908/patches-5.4/075-v5.13-0003-net-dsa-bcm_sf2-Fill-in-BCM4908-CFP-entries.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From f4e6d7cdbfae502788bc468295b232dec76ee57e Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Fri, 12 Mar 2021 13:11:01 -0800
-Subject: [PATCH] net: dsa: bcm_sf2: Fill in BCM4908 CFP entries
-
-The BCM4908 switch has 256 CFP entrie, update that setting so CFP can be
-used.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/bcm_sf2.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1060,7 +1060,7 @@ static const struct bcm_sf2_of_data bcm_
- 	.type		= BCM4908_DEVICE_ID,
- 	.core_reg_align	= 0,
- 	.reg_offsets	= bcm_sf2_4908_reg_offsets,
--	.num_cfp_rules	= 0, /* FIXME */
-+	.num_cfp_rules	= 256,
- 	.num_crossbar_int_ports = 2,
- };
- 
diff --git a/target/linux/bcm4908/patches-5.4/075-v5.13-0004-net-dsa-bcm_sf2-add-function-finding-RGMII-register.patch b/target/linux/bcm4908/patches-5.4/075-v5.13-0004-net-dsa-bcm_sf2-add-function-finding-RGMII-register.patch
deleted file mode 100644
index c46fd1d3b5..0000000000
--- a/target/linux/bcm4908/patches-5.4/075-v5.13-0004-net-dsa-bcm_sf2-add-function-finding-RGMII-register.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From 55cfeb396965c3906a84d09a9c487d065e37773b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 18 Mar 2021 09:01:42 +0100
-Subject: [PATCH 1/2] net: dsa: bcm_sf2: add function finding RGMII register
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Simple macro like REG_RGMII_CNTRL_P() is insufficient as:
-1. It doesn't validate port argument
-2. It doesn't support chipsets with non-lineral RGMII regs layout
-
-Missing port validation could result in getting register offset from out
-of array. Random memory -> random offset -> random reads/writes. It
-affected e.g. BCM4908 for REG_RGMII_CNTRL_P(7).
-
-Fixes: a78e86ed586d ("net: dsa: bcm_sf2: Prepare for different register layouts")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/bcm_sf2.c      | 49 +++++++++++++++++++++++++++++-----
- drivers/net/dsa/bcm_sf2_regs.h |  2 --
- 2 files changed, 42 insertions(+), 9 deletions(-)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -31,6 +31,31 @@
- #include "b53/b53_priv.h"
- #include "b53/b53_regs.h"
- 
-+static u16 bcm_sf2_reg_rgmii_cntrl(struct bcm_sf2_priv *priv, int port)
-+{
-+	switch (priv->type) {
-+	case BCM4908_DEVICE_ID:
-+		/* TODO */
-+		break;
-+	default:
-+		switch (port) {
-+		case 0:
-+			return REG_RGMII_0_CNTRL;
-+		case 1:
-+			return REG_RGMII_1_CNTRL;
-+		case 2:
-+			return REG_RGMII_2_CNTRL;
-+		default:
-+			break;
-+		}
-+	}
-+
-+	WARN_ONCE(1, "Unsupported port %d\n", port);
-+
-+	/* RO fallback reg */
-+	return REG_SWITCH_STATUS;
-+}
-+
- static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
- {
- 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-@@ -588,6 +613,7 @@ static void bcm_sf2_sw_mac_config(struct
- {
- 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- 	u32 id_mode_dis = 0, port_mode;
-+	u32 reg_rgmii_ctrl;
- 	u32 reg, offset;
- 
- 	if (port == core_readl(priv, CORE_IMP0_PRT_ID))
-@@ -617,10 +643,12 @@ static void bcm_sf2_sw_mac_config(struct
- 		goto force_link;
- 	}
- 
-+	reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
-+
- 	/* Clear id_mode_dis bit, and the existing port mode, let
- 	 * RGMII_MODE_EN bet set by mac_link_{up,down}
- 	 */
--	reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
-+	reg = reg_readl(priv, reg_rgmii_ctrl);
- 	reg &= ~ID_MODE_DIS;
- 	reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT);
- 	reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
-@@ -635,7 +663,7 @@ static void bcm_sf2_sw_mac_config(struct
- 		reg |= RX_PAUSE_EN;
- 	}
- 
--	reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
-+	reg_writel(priv, reg, reg_rgmii_ctrl);
- 
- force_link:
- 	/* Force link settings detected from the PHY */
-@@ -661,6 +689,7 @@ static void bcm_sf2_sw_mac_link_set(stru
- 				    phy_interface_t interface, bool link)
- {
- 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-+	u32 reg_rgmii_ctrl;
- 	u32 reg;
- 
- 	if (!phy_interface_mode_is_rgmii(interface) &&
-@@ -668,13 +697,15 @@ static void bcm_sf2_sw_mac_link_set(stru
- 	    interface != PHY_INTERFACE_MODE_REVMII)
- 		return;
- 
-+	reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
-+
- 	/* If the link is down, just disable the interface to conserve power */
--	reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
-+	reg = reg_readl(priv, reg_rgmii_ctrl);
- 	if (link)
- 		reg |= RGMII_MODE_EN;
- 	else
- 		reg &= ~RGMII_MODE_EN;
--	reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
-+	reg_writel(priv, reg, reg_rgmii_ctrl);
- }
- 
- static void bcm_sf2_sw_mac_link_down(struct dsa_switch *ds, int port,
---- a/drivers/net/dsa/bcm_sf2_regs.h
-+++ b/drivers/net/dsa/bcm_sf2_regs.h
-@@ -55,8 +55,6 @@ enum bcm_sf2_reg_offs {
- #define CROSSBAR_BCM4908_EXT_GPHY4	1
- #define CROSSBAR_BCM4908_EXT_RGMII	2
- 
--#define REG_RGMII_CNTRL_P(x)		(REG_RGMII_0_CNTRL + (x))
--
- /* Relative to REG_RGMII_CNTRL */
- #define  RGMII_MODE_EN			(1 << 0)
- #define  ID_MODE_DIS			(1 << 1)
diff --git a/target/linux/bcm4908/patches-5.4/075-v5.13-0005-net-dsa-bcm_sf2-fix-BCM4908-RGMII-reg-s.patch b/target/linux/bcm4908/patches-5.4/075-v5.13-0005-net-dsa-bcm_sf2-fix-BCM4908-RGMII-reg-s.patch
deleted file mode 100644
index d0783ea5e7..0000000000
--- a/target/linux/bcm4908/patches-5.4/075-v5.13-0005-net-dsa-bcm_sf2-fix-BCM4908-RGMII-reg-s.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 6859d91549341c2ad769d482de58129f080c0f04 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 18 Mar 2021 09:01:43 +0100
-Subject: [PATCH 2/2] net: dsa: bcm_sf2: fix BCM4908 RGMII reg(s)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 has only 1 RGMII reg for controlling port 7.
-
-Fixes: 73b7a6047971 ("net: dsa: bcm_sf2: support BCM4908's integrated switch")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/bcm_sf2.c      | 11 +++++++----
- drivers/net/dsa/bcm_sf2_regs.h |  1 +
- 2 files changed, 8 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -35,7 +35,12 @@ static u16 bcm_sf2_reg_rgmii_cntrl(struc
- {
- 	switch (priv->type) {
- 	case BCM4908_DEVICE_ID:
--		/* TODO */
-+		switch (port) {
-+		case 7:
-+			return REG_RGMII_11_CNTRL;
-+		default:
-+			break;
-+		}
- 		break;
- 	default:
- 		switch (port) {
-@@ -1079,9 +1084,7 @@ static const u16 bcm_sf2_4908_reg_offset
- 	[REG_PHY_REVISION]	= 0x14,
- 	[REG_SPHY_CNTRL]	= 0x24,
- 	[REG_CROSSBAR]		= 0xc8,
--	[REG_RGMII_0_CNTRL]	= 0xe0,
--	[REG_RGMII_1_CNTRL]	= 0xec,
--	[REG_RGMII_2_CNTRL]	= 0xf8,
-+	[REG_RGMII_11_CNTRL]	= 0x014c,
- 	[REG_LED_0_CNTRL]	= 0x40,
- 	[REG_LED_1_CNTRL]	= 0x4c,
- 	[REG_LED_2_CNTRL]	= 0x58,
---- a/drivers/net/dsa/bcm_sf2_regs.h
-+++ b/drivers/net/dsa/bcm_sf2_regs.h
-@@ -21,6 +21,7 @@ enum bcm_sf2_reg_offs {
- 	REG_RGMII_0_CNTRL,
- 	REG_RGMII_1_CNTRL,
- 	REG_RGMII_2_CNTRL,
-+	REG_RGMII_11_CNTRL,
- 	REG_LED_0_CNTRL,
- 	REG_LED_1_CNTRL,
- 	REG_LED_2_CNTRL,
diff --git a/target/linux/bcm4908/patches-5.4/076-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch b/target/linux/bcm4908/patches-5.4/076-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch
deleted file mode 100644
index 88f2c3c0cd..0000000000
--- a/target/linux/bcm4908/patches-5.4/076-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch
+++ /dev/null
@@ -1,209 +0,0 @@
-From af30f8eaa8fe4ff1987280f716309711997bd979 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 29 Dec 2021 18:16:42 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: refactor LED regs access
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1. Define more regs. Some switches (e.g. BCM4908) have up to 6 regs.
-2. Add helper for handling non-lineral port <-> reg mappings.
-3. Add support for 12 B LED reg blocks on BCM4908 (different layout)
-
-Complete support for LEDs setup will be implemented once Linux receives
-a proper design & implementation for "hardware" LEDs.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20211229171642.22942-1-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/bcm_sf2.c      | 54 ++++++++++++++++++++++++----
- drivers/net/dsa/bcm_sf2.h      | 10 ++++++
- drivers/net/dsa/bcm_sf2_regs.h | 65 +++++++++++++++++++++++++++++++---
- 3 files changed, 119 insertions(+), 10 deletions(-)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -31,6 +31,38 @@
- #include "b53/b53_priv.h"
- #include "b53/b53_regs.h"
- 
-+static u16 bcm_sf2_reg_led_base(struct bcm_sf2_priv *priv, int port)
-+{
-+	switch (port) {
-+	case 0:
-+		return REG_LED_0_CNTRL;
-+	case 1:
-+		return REG_LED_1_CNTRL;
-+	case 2:
-+		return REG_LED_2_CNTRL;
-+	}
-+
-+	switch (priv->type) {
-+	case BCM4908_DEVICE_ID:
-+		switch (port) {
-+		case 3:
-+			return REG_LED_3_CNTRL;
-+		case 7:
-+			return REG_LED_4_CNTRL;
-+		default:
-+			break;
-+		}
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	WARN_ONCE(1, "Unsupported port %d\n", port);
-+
-+	/* RO fallback reg */
-+	return REG_SWITCH_STATUS;
-+}
-+
- static u16 bcm_sf2_reg_rgmii_cntrl(struct bcm_sf2_priv *priv, int port)
- {
- 	switch (priv->type) {
-@@ -141,9 +173,14 @@ static void bcm_sf2_gphy_enable_set(stru
- 
- 	/* Use PHY-driven LED signaling */
- 	if (!enable) {
--		reg = reg_readl(priv, REG_LED_CNTRL(0));
--		reg |= SPDLNK_SRC_SEL;
--		reg_writel(priv, reg, REG_LED_CNTRL(0));
-+		u16 led_ctrl = bcm_sf2_reg_led_base(priv, 0);
-+
-+		if (priv->type == BCM7278_DEVICE_ID ||
-+		    priv->type == BCM7445_DEVICE_ID) {
-+			reg = reg_led_readl(priv, led_ctrl, 0);
-+			reg |= LED_CNTRL_SPDLNK_SRC_SEL;
-+			reg_led_writel(priv, reg, led_ctrl, 0);
-+		}
- 	}
- }
- 
-@@ -1085,9 +1122,14 @@ static const u16 bcm_sf2_4908_reg_offset
- 	[REG_SPHY_CNTRL]	= 0x24,
- 	[REG_CROSSBAR]		= 0xc8,
- 	[REG_RGMII_11_CNTRL]	= 0x014c,
--	[REG_LED_0_CNTRL]	= 0x40,
--	[REG_LED_1_CNTRL]	= 0x4c,
--	[REG_LED_2_CNTRL]	= 0x58,
-+	[REG_LED_0_CNTRL]		= 0x40,
-+	[REG_LED_1_CNTRL]		= 0x4c,
-+	[REG_LED_2_CNTRL]		= 0x58,
-+	[REG_LED_3_CNTRL]		= 0x64,
-+	[REG_LED_4_CNTRL]		= 0x88,
-+	[REG_LED_5_CNTRL]		= 0xa0,
-+	[REG_LED_AGGREGATE_CTRL]	= 0xb8,
-+
- };
- 
- static const struct bcm_sf2_of_data bcm_sf2_4908_data = {
---- a/drivers/net/dsa/bcm_sf2.h
-+++ b/drivers/net/dsa/bcm_sf2.h
-@@ -203,6 +203,16 @@ SF2_IO_MACRO(acb);
- SWITCH_INTR_L2(0);
- SWITCH_INTR_L2(1);
- 
-+static inline u32 reg_led_readl(struct bcm_sf2_priv *priv, u16 off, u16 reg)
-+{
-+	return readl_relaxed(priv->reg + priv->reg_offsets[off] + reg);
-+}
-+
-+static inline void reg_led_writel(struct bcm_sf2_priv *priv, u32 val, u16 off, u16 reg)
-+{
-+	writel_relaxed(val, priv->reg + priv->reg_offsets[off] + reg);
-+}
-+
- /* RXNFC */
- int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port,
- 		      struct ethtool_rxnfc *nfc, u32 *rule_locs);
---- a/drivers/net/dsa/bcm_sf2_regs.h
-+++ b/drivers/net/dsa/bcm_sf2_regs.h
-@@ -25,6 +25,10 @@ enum bcm_sf2_reg_offs {
- 	REG_LED_0_CNTRL,
- 	REG_LED_1_CNTRL,
- 	REG_LED_2_CNTRL,
-+	REG_LED_3_CNTRL,
-+	REG_LED_4_CNTRL,
-+	REG_LED_5_CNTRL,
-+	REG_LED_AGGREGATE_CTRL,
- 	REG_SWITCH_REG_MAX,
- };
- 
-@@ -56,6 +60,63 @@ enum bcm_sf2_reg_offs {
- #define CROSSBAR_BCM4908_EXT_GPHY4	1
- #define CROSSBAR_BCM4908_EXT_RGMII	2
- 
-+/* Relative to REG_LED_*_CNTRL (BCM7278, BCM7445) */
-+#define  LED_CNTRL_NO_LINK_ENCODE_SHIFT		0
-+#define  LED_CNTRL_M10_ENCODE_SHIFT		2
-+#define  LED_CNTRL_M100_ENCODE_SHIFT		4
-+#define  LED_CNTRL_M1000_ENCODE_SHIFT		6
-+#define  LED_CNTRL_SEL_NO_LINK_ENCODE_SHIFT	8
-+#define  LED_CNTRL_SEL_10M_ENCODE_SHIFT		10
-+#define  LED_CNTRL_SEL_100M_ENCODE_SHIFT	12
-+#define  LED_CNTRL_SEL_1000M_ENCODE_SHIFT	14
-+#define  LED_CNTRL_RX_DV_EN			(1 << 16)
-+#define  LED_CNTRL_TX_EN_EN			(1 << 17)
-+#define  LED_CNTRL_SPDLNK_LED0_ACT_SEL_SHIFT	18
-+#define  LED_CNTRL_SPDLNK_LED1_ACT_SEL_SHIFT	20
-+#define  LED_CNTRL_ACT_LED_ACT_SEL_SHIFT	22
-+#define  LED_CNTRL_SPDLNK_SRC_SEL		(1 << 24)
-+#define  LED_CNTRL_SPDLNK_LED0_ACT_POL_SEL	(1 << 25)
-+#define  LED_CNTRL_SPDLNK_LED1_ACT_POL_SEL	(1 << 26)
-+#define  LED_CNTRL_ACT_LED_POL_SEL		(1 << 27)
-+#define  LED_CNTRL_MASK				0x3
-+
-+/* Register relative to REG_LED_*_CNTRL (BCM4908) */
-+#define REG_LED_CTRL				0x0
-+#define  LED_CTRL_RX_ACT_EN			0x00000001
-+#define  LED_CTRL_TX_ACT_EN			0x00000002
-+#define  LED_CTRL_SPDLNK_LED0_ACT_SEL		0x00000004
-+#define  LED_CTRL_SPDLNK_LED1_ACT_SEL		0x00000008
-+#define  LED_CTRL_SPDLNK_LED2_ACT_SEL		0x00000010
-+#define  LED_CTRL_ACT_LED_ACT_SEL		0x00000020
-+#define  LED_CTRL_SPDLNK_LED0_ACT_POL_SEL	0x00000040
-+#define  LED_CTRL_SPDLNK_LED1_ACT_POL_SEL	0x00000080
-+#define  LED_CTRL_SPDLNK_LED2_ACT_POL_SEL	0x00000100
-+#define  LED_CTRL_ACT_LED_POL_SEL		0x00000200
-+#define  LED_CTRL_LED_SPD_OVRD			0x00001c00
-+#define  LED_CTRL_LNK_STATUS_OVRD		0x00002000
-+#define  LED_CTRL_SPD_OVRD_EN			0x00004000
-+#define  LED_CTRL_LNK_OVRD_EN			0x00008000
-+
-+/* Register relative to REG_LED_*_CNTRL (BCM4908) */
-+#define REG_LED_LINK_SPEED_ENC_SEL		0x4
-+#define  LED_LINK_SPEED_ENC_SEL_NO_LINK_SHIFT	0
-+#define  LED_LINK_SPEED_ENC_SEL_10M_SHIFT	3
-+#define  LED_LINK_SPEED_ENC_SEL_100M_SHIFT	6
-+#define  LED_LINK_SPEED_ENC_SEL_1000M_SHIFT	9
-+#define  LED_LINK_SPEED_ENC_SEL_2500M_SHIFT	12
-+#define  LED_LINK_SPEED_ENC_SEL_10G_SHIFT	15
-+#define  LED_LINK_SPEED_ENC_SEL_MASK		0x7
-+
-+/* Register relative to REG_LED_*_CNTRL (BCM4908) */
-+#define REG_LED_LINK_SPEED_ENC			0x8
-+#define  LED_LINK_SPEED_ENC_NO_LINK_SHIFT	0
-+#define  LED_LINK_SPEED_ENC_M10_SHIFT		3
-+#define  LED_LINK_SPEED_ENC_M100_SHIFT		6
-+#define  LED_LINK_SPEED_ENC_M1000_SHIFT		9
-+#define  LED_LINK_SPEED_ENC_M2500_SHIFT		12
-+#define  LED_LINK_SPEED_ENC_M10G_SHIFT		15
-+#define  LED_LINK_SPEED_ENC_MASK		0x7
-+
- /* Relative to REG_RGMII_CNTRL */
- #define  RGMII_MODE_EN			(1 << 0)
- #define  ID_MODE_DIS			(1 << 1)
-@@ -73,10 +134,6 @@ enum bcm_sf2_reg_offs {
- #define  LPI_COUNT_SHIFT		9
- #define  LPI_COUNT_MASK			0x3F
- 
--#define REG_LED_CNTRL(x)		(REG_LED_0_CNTRL + (x))
--
--#define  SPDLNK_SRC_SEL			(1 << 24)
--
- /* Register set relative to 'INTRL2_0' and 'INTRL2_1' */
- #define INTRL2_CPU_STATUS		0x00
- #define INTRL2_CPU_SET			0x04
diff --git a/target/linux/bcm4908/patches-5.4/080-v5.11-tty-serial-bcm63xx-lower-driver-dependencies.patch b/target/linux/bcm4908/patches-5.4/080-v5.11-tty-serial-bcm63xx-lower-driver-dependencies.patch
deleted file mode 100644
index 8da2fe8cf2..0000000000
--- a/target/linux/bcm4908/patches-5.4/080-v5.11-tty-serial-bcm63xx-lower-driver-dependencies.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From f35a07f92616700733636c06dd6e5b6cdc807fe4 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 25 Nov 2020 10:06:08 +0100
-Subject: [PATCH] tty: serial: bcm63xx: lower driver dependencies
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Hardware supported by bcm63xx is also used by BCM4908 SoCs family that
-is ARM64. In future more architectures may need it as well. There is
-nothing arch specific breaking compilation so just stick to requiring
-COMMON_CLK.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20201125090608.28442-1-zajec5@gmail.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/tty/serial/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/tty/serial/Kconfig
-+++ b/drivers/tty/serial/Kconfig
-@@ -1125,7 +1125,7 @@ config SERIAL_TIMBERDALE
- config SERIAL_BCM63XX
- 	tristate "Broadcom BCM63xx/BCM33xx UART support"
- 	select SERIAL_CORE
--	depends on MIPS || ARM || COMPILE_TEST
-+	depends on COMMON_CLK
- 	help
- 	  This enables the driver for the onchip UART core found on
- 	  the following chipsets:
diff --git a/target/linux/bcm4908/patches-5.4/081-v5.12-reset-simple-add-BCM4908-MISC-PCIe-reset-controller-.patch b/target/linux/bcm4908/patches-5.4/081-v5.12-reset-simple-add-BCM4908-MISC-PCIe-reset-controller-.patch
deleted file mode 100644
index 8ccd876619..0000000000
--- a/target/linux/bcm4908/patches-5.4/081-v5.12-reset-simple-add-BCM4908-MISC-PCIe-reset-controller-.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From def26913b66fd94e431afecf28e09c08e8c02a35 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 27 Nov 2020 12:14:42 +0100
-Subject: [PATCH] reset: simple: add BCM4908 MISC PCIe reset controller support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's a trivial reset controller. One register with bit per PCIe core.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
----
- drivers/reset/Kconfig        | 2 +-
- drivers/reset/reset-simple.c | 2 ++
- 2 files changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/reset/Kconfig
-+++ b/drivers/reset/Kconfig
-@@ -129,7 +129,7 @@ config RESET_SCMI
- 
- config RESET_SIMPLE
- 	bool "Simple Reset Controller Driver" if COMPILE_TEST
--	default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN || ARC
-+	default ARCH_BCM4908 || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN || ARC
- 	help
- 	  This enables a simple reset controller driver for reset lines that
- 	  that can be asserted and deasserted by toggling bits in a contiguous,
---- a/drivers/reset/reset-simple.c
-+++ b/drivers/reset/reset-simple.c
-@@ -127,6 +127,8 @@ static const struct of_device_id reset_s
- 	{ .compatible = "aspeed,ast2500-lpc-reset" },
- 	{ .compatible = "bitmain,bm1880-reset",
- 		.data = &reset_simple_active_low },
-+	{ .compatible = "brcm,bcm4908-misc-pcie-reset",
-+		.data = &reset_simple_active_low },
- 	{ .compatible = "snps,dw-high-reset" },
- 	{ .compatible = "snps,dw-low-reset",
- 		.data = &reset_simple_active_low },
diff --git a/target/linux/bcm4908/patches-5.4/082-v5.12-0001-dt-bindings-power-document-Broadcom-s-PMB-binding.patch b/target/linux/bcm4908/patches-5.4/082-v5.12-0001-dt-bindings-power-document-Broadcom-s-PMB-binding.patch
deleted file mode 100644
index c5c1a5dc7e..0000000000
--- a/target/linux/bcm4908/patches-5.4/082-v5.12-0001-dt-bindings-power-document-Broadcom-s-PMB-binding.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 82853543057f78d8a331272b70bc3f1e8cb0cbf4 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 14 Dec 2020 19:07:42 +0100
-Subject: [PATCH] dt-bindings: power: document Broadcom's PMB binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom's PMB is power controller used for disabling and enabling SoC
-devices.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bindings/power/brcm,bcm-pmb.yaml          | 50 +++++++++++++++++++
- include/dt-bindings/soc/bcm-pmb.h             | 11 ++++
- 2 files changed, 61 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml
- create mode 100644 include/dt-bindings/soc/bcm-pmb.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml
-@@ -0,0 +1,50 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/power/brcm,bcm-pmb.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom PMB (Power Management Bus) controller
-+
-+description: This document describes Broadcom's PMB controller. It supports
-+  powering various types of connected devices (e.g. PCIe, USB, SATA).
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  compatible:
-+    enum:
-+      - brcm,bcm4908-pmb
-+
-+  reg:
-+    description: register space of one or more buses
-+    maxItems: 1
-+
-+  big-endian:
-+    $ref: /schemas/types.yaml#/definitions/flag
-+    description: Flag to use for block working in big endian mode.
-+
-+  "#power-domain-cells":
-+    description: cell specifies device ID (see bcm-pmb.h)
-+    const: 1
-+
-+required:
-+  - reg
-+  - "#power-domain-cells"
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    #include <dt-bindings/soc/bcm-pmb.h>
-+
-+    pmb: power-controller@802800e0 {
-+        compatible = "brcm,bcm4908-pmb";
-+        reg = <0x802800e0 0x40>;
-+        #power-domain-cells = <1>;
-+    };
-+
-+    foo {
-+        power-domains = <&pmb BCM_PMB_PCIE0>;
-+    };
---- /dev/null
-+++ b/include/dt-bindings/soc/bcm-pmb.h
-@@ -0,0 +1,11 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT */
-+
-+#ifndef __DT_BINDINGS_SOC_BCM_PMB_H
-+#define __DT_BINDINGS_SOC_BCM_PMB_H
-+
-+#define BCM_PMB_PCIE0				0x01
-+#define BCM_PMB_PCIE1				0x02
-+#define BCM_PMB_PCIE2				0x03
-+#define BCM_PMB_HOST_USB			0x04
-+
-+#endif
diff --git a/target/linux/bcm4908/patches-5.4/082-v5.12-0002-soc-bcm-add-PM-driver-for-Broadcom-s-PMB.patch b/target/linux/bcm4908/patches-5.4/082-v5.12-0002-soc-bcm-add-PM-driver-for-Broadcom-s-PMB.patch
deleted file mode 100644
index 40126a968b..0000000000
--- a/target/linux/bcm4908/patches-5.4/082-v5.12-0002-soc-bcm-add-PM-driver-for-Broadcom-s-PMB.patch
+++ /dev/null
@@ -1,414 +0,0 @@
-From 8bcac4011ebe0dbdd46fd55b036ee855c95702d3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 14 Dec 2020 19:07:43 +0100
-Subject: [PATCH] soc: bcm: add PM driver for Broadcom's PMB
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-PMB originally comes from BCM63138 but can be also found on many other
-chipsets (e.g. BCM4908). It's needed to power on and off SoC blocks like
-PCIe, SATA, USB.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- MAINTAINERS                       |  10 +
- drivers/soc/bcm/Makefile          |   2 +-
- drivers/soc/bcm/bcm63xx/Kconfig   |   9 +
- drivers/soc/bcm/bcm63xx/Makefile  |   1 +
- drivers/soc/bcm/bcm63xx/bcm-pmb.c | 333 ++++++++++++++++++++++++++++++
- 5 files changed, 354 insertions(+), 1 deletion(-)
- create mode 100644 drivers/soc/bcm/bcm63xx/bcm-pmb.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3415,6 +3415,16 @@ L:	linux-mips@vger.kernel.org
- S:	Maintained
- F:	drivers/firmware/broadcom/*
- 
-+BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER
-+M:	Rafał Miłecki <rafal@milecki.pl>
-+M:	Florian Fainelli <f.fainelli@gmail.com>
-+M:	bcm-kernel-feedback-list@broadcom.com
-+L:	linux-pm@vger.kernel.org
-+S:	Maintained
-+T:	git git://github.com/broadcom/stblinux.git
-+F:	drivers/soc/bcm/bcm-pmb.c
-+F:	include/dt-bindings/soc/bcm-pmb.h
-+
- BROADCOM SPECIFIC AMBA DRIVER (BCMA)
- M:	Rafał Miłecki <zajec5@gmail.com>
- L:	linux-wireless@vger.kernel.org
---- /dev/null
-+++ b/drivers/soc/bcm/bcm63xx/Kconfig
-@@ -0,0 +1,9 @@
-+# SPDX-License-Identifier: GPL-2.0-only
-+config BCM_PMB
-+	bool "Broadcom PMB (Power Management Bus) driver"
-+	depends on ARCH_BCM4908 || (COMPILE_TEST && OF)
-+	default ARCH_BCM4908
-+	select PM_GENERIC_DOMAINS if PM
-+	help
-+	  This enables support for the Broadcom's PMB (Power Management Bus) that
-+	  is used for disabling and enabling SoC devices.
---- /dev/null
-+++ b/drivers/soc/bcm/bcm63xx/Makefile
-@@ -0,0 +1,2 @@
-+# SPDX-License-Identifier: GPL-2.0-only
-+obj-$(CONFIG_BCM_PMB)		+= bcm-pmb.o 
---- /dev/null
-+++ b/drivers/soc/bcm/bcm63xx/bcm-pmb.c
-@@ -0,0 +1,333 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * Copyright (c) 2013 Broadcom
-+ * Copyright (C) 2020 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <dt-bindings/soc/bcm-pmb.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_domain.h>
-+#include <linux/reset/bcm63xx_pmb.h>
-+
-+#define BPCM_ID_REG					0x00
-+#define BPCM_CAPABILITIES				0x04
-+#define  BPCM_CAP_NUM_ZONES				0x000000ff
-+#define  BPCM_CAP_SR_REG_BITS				0x0000ff00
-+#define  BPCM_CAP_PLLTYPE				0x00030000
-+#define  BPCM_CAP_UBUS					0x00080000
-+#define BPCM_CONTROL					0x08
-+#define BPCM_STATUS					0x0c
-+#define BPCM_ROSC_CONTROL				0x10
-+#define BPCM_ROSC_THRESH_H				0x14
-+#define BPCM_ROSC_THRESHOLD_BCM6838			0x14
-+#define BPCM_ROSC_THRESH_S				0x18
-+#define BPCM_ROSC_COUNT_BCM6838				0x18
-+#define BPCM_ROSC_COUNT					0x1c
-+#define BPCM_PWD_CONTROL_BCM6838			0x1c
-+#define BPCM_PWD_CONTROL				0x20
-+#define BPCM_SR_CONTROL_BCM6838				0x20
-+#define BPCM_PWD_ACCUM_CONTROL				0x24
-+#define BPCM_SR_CONTROL					0x28
-+#define BPCM_GLOBAL_CONTROL				0x2c
-+#define BPCM_MISC_CONTROL				0x30
-+#define BPCM_MISC_CONTROL2				0x34
-+#define BPCM_SGPHY_CNTL					0x38
-+#define BPCM_SGPHY_STATUS				0x3c
-+#define BPCM_ZONE0					0x40
-+#define  BPCM_ZONE_CONTROL				0x00
-+#define   BPCM_ZONE_CONTROL_MANUAL_CLK_EN		0x00000001
-+#define   BPCM_ZONE_CONTROL_MANUAL_RESET_CTL		0x00000002
-+#define   BPCM_ZONE_CONTROL_FREQ_SCALE_USED		0x00000004	/* R/O */
-+#define   BPCM_ZONE_CONTROL_DPG_CAPABLE			0x00000008	/* R/O */
-+#define   BPCM_ZONE_CONTROL_MANUAL_MEM_PWR		0x00000030
-+#define   BPCM_ZONE_CONTROL_MANUAL_ISO_CTL		0x00000040
-+#define   BPCM_ZONE_CONTROL_MANUAL_CTL			0x00000080
-+#define   BPCM_ZONE_CONTROL_DPG_CTL_EN			0x00000100
-+#define   BPCM_ZONE_CONTROL_PWR_DN_REQ			0x00000200
-+#define   BPCM_ZONE_CONTROL_PWR_UP_REQ			0x00000400
-+#define   BPCM_ZONE_CONTROL_MEM_PWR_CTL_EN		0x00000800
-+#define   BPCM_ZONE_CONTROL_BLK_RESET_ASSERT		0x00001000
-+#define   BPCM_ZONE_CONTROL_MEM_STBY			0x00002000
-+#define   BPCM_ZONE_CONTROL_RESERVED			0x0007c000
-+#define   BPCM_ZONE_CONTROL_PWR_CNTL_STATE		0x00f80000
-+#define   BPCM_ZONE_CONTROL_FREQ_SCALAR_DYN_SEL		0x01000000	/* R/O */
-+#define   BPCM_ZONE_CONTROL_PWR_OFF_STATE		0x02000000	/* R/O */
-+#define   BPCM_ZONE_CONTROL_PWR_ON_STATE		0x04000000	/* R/O */
-+#define   BPCM_ZONE_CONTROL_PWR_GOOD			0x08000000	/* R/O */
-+#define   BPCM_ZONE_CONTROL_DPG_PWR_STATE		0x10000000	/* R/O */
-+#define   BPCM_ZONE_CONTROL_MEM_PWR_STATE		0x20000000	/* R/O */
-+#define   BPCM_ZONE_CONTROL_ISO_STATE			0x40000000	/* R/O */
-+#define   BPCM_ZONE_CONTROL_RESET_STATE			0x80000000	/* R/O */
-+#define  BPCM_ZONE_CONFIG1				0x04
-+#define  BPCM_ZONE_CONFIG2				0x08
-+#define  BPCM_ZONE_FREQ_SCALAR_CONTROL			0x0c
-+#define  BPCM_ZONE_SIZE					0x10
-+
-+struct bcm_pmb {
-+	struct device *dev;
-+	void __iomem *base;
-+	spinlock_t lock;
-+	bool little_endian;
-+	struct genpd_onecell_data genpd_onecell_data;
-+};
-+
-+struct bcm_pmb_pd_data {
-+	const char * const name;
-+	int id;
-+	u8 bus;
-+	u8 device;
-+};
-+
-+struct bcm_pmb_pm_domain {
-+	struct bcm_pmb *pmb;
-+	const struct bcm_pmb_pd_data *data;
-+	struct generic_pm_domain genpd;
-+};
-+
-+static int bcm_pmb_bpcm_read(struct bcm_pmb *pmb, int bus, u8 device,
-+			     int offset, u32 *val)
-+{
-+	void __iomem *base = pmb->base + bus * 0x20;
-+	unsigned long flags;
-+	int err;
-+
-+	spin_lock_irqsave(&pmb->lock, flags);
-+	err = bpcm_rd(base, device, offset, val);
-+	spin_unlock_irqrestore(&pmb->lock, flags);
-+
-+	if (!err)
-+		*val = pmb->little_endian ? le32_to_cpu(*val) : be32_to_cpu(*val);
-+
-+	return err;
-+}
-+
-+static int bcm_pmb_bpcm_write(struct bcm_pmb *pmb, int bus, u8 device,
-+			      int offset, u32 val)
-+{
-+	void __iomem *base = pmb->base + bus * 0x20;
-+	unsigned long flags;
-+	int err;
-+
-+	val = pmb->little_endian ? cpu_to_le32(val) : cpu_to_be32(val);
-+
-+	spin_lock_irqsave(&pmb->lock, flags);
-+	err = bpcm_wr(base, device, offset, val);
-+	spin_unlock_irqrestore(&pmb->lock, flags);
-+
-+	return err;
-+}
-+
-+static int bcm_pmb_power_off_zone(struct bcm_pmb *pmb, int bus, u8 device,
-+				  int zone)
-+{
-+	int offset;
-+	u32 val;
-+	int err;
-+
-+	offset = BPCM_ZONE0 + zone * BPCM_ZONE_SIZE + BPCM_ZONE_CONTROL;
-+
-+	err = bcm_pmb_bpcm_read(pmb, bus, device, offset, &val);
-+	if (err)
-+		return err;
-+
-+	val |= BPCM_ZONE_CONTROL_PWR_DN_REQ;
-+	val &= ~BPCM_ZONE_CONTROL_PWR_UP_REQ;
-+
-+	err = bcm_pmb_bpcm_write(pmb, bus, device, offset, val);
-+
-+	return err;
-+}
-+
-+static int bcm_pmb_power_on_zone(struct bcm_pmb *pmb, int bus, u8 device,
-+				 int zone)
-+{
-+	int offset;
-+	u32 val;
-+	int err;
-+
-+	offset = BPCM_ZONE0 + zone * BPCM_ZONE_SIZE + BPCM_ZONE_CONTROL;
-+
-+	err = bcm_pmb_bpcm_read(pmb, bus, device, offset, &val);
-+	if (err)
-+		return err;
-+
-+	if (!(val & BPCM_ZONE_CONTROL_PWR_ON_STATE)) {
-+		val &= ~BPCM_ZONE_CONTROL_PWR_DN_REQ;
-+		val |= BPCM_ZONE_CONTROL_DPG_CTL_EN;
-+		val |= BPCM_ZONE_CONTROL_PWR_UP_REQ;
-+		val |= BPCM_ZONE_CONTROL_MEM_PWR_CTL_EN;
-+		val |= BPCM_ZONE_CONTROL_BLK_RESET_ASSERT;
-+
-+		err = bcm_pmb_bpcm_write(pmb, bus, device, offset, val);
-+	}
-+
-+	return err;
-+}
-+
-+static int bcm_pmb_power_off_device(struct bcm_pmb *pmb, int bus, u8 device)
-+{
-+	int offset;
-+	u32 val;
-+	int err;
-+
-+	/* Entire device can be powered off by powering off the 0th zone */
-+	offset = BPCM_ZONE0 + BPCM_ZONE_CONTROL;
-+
-+	err = bcm_pmb_bpcm_read(pmb, bus, device, offset, &val);
-+	if (err)
-+		return err;
-+
-+	if (!(val & BPCM_ZONE_CONTROL_PWR_OFF_STATE)) {
-+		val = BPCM_ZONE_CONTROL_PWR_DN_REQ;
-+
-+		err = bcm_pmb_bpcm_write(pmb, bus, device, offset, val);
-+	}
-+
-+	return err;
-+}
-+
-+static int bcm_pmb_power_on_device(struct bcm_pmb *pmb, int bus, u8 device)
-+{
-+	u32 val;
-+	int err;
-+	int i;
-+
-+	err = bcm_pmb_bpcm_read(pmb, bus, device, BPCM_CAPABILITIES, &val);
-+	if (err)
-+		return err;
-+
-+	for (i = 0; i < (val & BPCM_CAP_NUM_ZONES); i++) {
-+		err = bcm_pmb_power_on_zone(pmb, bus, device, i);
-+		if (err)
-+			return err;
-+	}
-+
-+	return err;
-+}
-+
-+static int bcm_pmb_power_on(struct generic_pm_domain *genpd)
-+{
-+	struct bcm_pmb_pm_domain *pd = container_of(genpd, struct bcm_pmb_pm_domain, genpd);
-+	const struct bcm_pmb_pd_data *data = pd->data;
-+	struct bcm_pmb *pmb = pd->pmb;
-+
-+	switch (data->id) {
-+	case BCM_PMB_PCIE0:
-+	case BCM_PMB_PCIE1:
-+	case BCM_PMB_PCIE2:
-+		return bcm_pmb_power_on_zone(pmb, data->bus, data->device, 0);
-+	case BCM_PMB_HOST_USB:
-+		return bcm_pmb_power_on_device(pmb, data->bus, data->device);
-+	default:
-+		dev_err(pmb->dev, "unsupported device id: %d\n", data->id);
-+		return -EINVAL;
-+	}
-+}
-+
-+static int bcm_pmb_power_off(struct generic_pm_domain *genpd)
-+{
-+	struct bcm_pmb_pm_domain *pd = container_of(genpd, struct bcm_pmb_pm_domain, genpd);
-+	const struct bcm_pmb_pd_data *data = pd->data;
-+	struct bcm_pmb *pmb = pd->pmb;
-+
-+	switch (data->id) {
-+	case BCM_PMB_PCIE0:
-+	case BCM_PMB_PCIE1:
-+	case BCM_PMB_PCIE2:
-+		return bcm_pmb_power_off_zone(pmb, data->bus, data->device, 0);
-+	case BCM_PMB_HOST_USB:
-+		return bcm_pmb_power_off_device(pmb, data->bus, data->device);
-+	default:
-+		dev_err(pmb->dev, "unsupported device id: %d\n", data->id);
-+		return -EINVAL;
-+	}
-+}
-+
-+static int bcm_pmb_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	const struct bcm_pmb_pd_data *table;
-+	const struct bcm_pmb_pd_data *e;
-+	struct resource *res;
-+	struct bcm_pmb *pmb;
-+	int max_id;
-+	int err;
-+
-+	pmb = devm_kzalloc(dev, sizeof(*pmb), GFP_KERNEL);
-+	if (!pmb)
-+		return -ENOMEM;
-+
-+	pmb->dev = dev;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	pmb->base = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(pmb->base))
-+		return PTR_ERR(pmb->base);
-+
-+	spin_lock_init(&pmb->lock);
-+
-+	pmb->little_endian = !of_device_is_big_endian(dev->of_node);
-+
-+	table = of_device_get_match_data(dev);
-+	if (!table)
-+		return -EINVAL;
-+
-+	max_id = 0;
-+	for (e = table; e->name; e++)
-+		max_id = max(max_id, e->id);
-+
-+	pmb->genpd_onecell_data.num_domains = max_id + 1;
-+	pmb->genpd_onecell_data.domains =
-+		devm_kcalloc(dev, pmb->genpd_onecell_data.num_domains,
-+			     sizeof(struct generic_pm_domain *), GFP_KERNEL);
-+	if (!pmb->genpd_onecell_data.domains)
-+		return -ENOMEM;
-+
-+	for (e = table; e->name; e++) {
-+		struct bcm_pmb_pm_domain *pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
-+
-+		pd->pmb = pmb;
-+		pd->data = e;
-+		pd->genpd.name = e->name;
-+		pd->genpd.power_on = bcm_pmb_power_on;
-+		pd->genpd.power_off = bcm_pmb_power_off;
-+
-+		pm_genpd_init(&pd->genpd, NULL, true);
-+		pmb->genpd_onecell_data.domains[e->id] = &pd->genpd;
-+	}
-+
-+	err = of_genpd_add_provider_onecell(dev->of_node, &pmb->genpd_onecell_data);
-+	if (err) {
-+		dev_err(dev, "failed to add genpd provider: %d\n", err);
-+		return err;
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct bcm_pmb_pd_data bcm_pmb_bcm4908_data[] = {
-+	{ .name = "pcie2", .id = BCM_PMB_PCIE2, .bus = 0, .device = 2, },
-+	{ .name = "pcie0", .id = BCM_PMB_PCIE0, .bus = 1, .device = 14, },
-+	{ .name = "pcie1", .id = BCM_PMB_PCIE1, .bus = 1, .device = 15, },
-+	{ .name = "usb", .id = BCM_PMB_HOST_USB, .bus = 1, .device = 17, },
-+	{ },
-+};
-+
-+static const struct of_device_id bcm_pmb_of_match[] = {
-+	{ .compatible = "brcm,bcm4908-pmb", .data = &bcm_pmb_bcm4908_data, },
-+	{ },
-+};
-+
-+static struct platform_driver bcm_pmb_driver = {
-+	.driver = {
-+		.name = "bcm-pmb",
-+		.of_match_table = bcm_pmb_of_match,
-+	},
-+	.probe  = bcm_pmb_probe,
-+};
-+
-+builtin_platform_driver(bcm_pmb_driver);
---- a/drivers/soc/bcm/Kconfig
-+++ b/drivers/soc/bcm/Kconfig
-@@ -33,6 +33,7 @@ config SOC_BRCMSTB
- 
- 	  If unsure, say N.
- 
-+source "drivers/soc/bcm/bcm63xx/Kconfig"
- source "drivers/soc/bcm/brcmstb/Kconfig"
- 
- endmenu
---- a/drivers/soc/bcm/Makefile
-+++ b/drivers/soc/bcm/Makefile
-@@ -1,4 +1,5 @@
- # SPDX-License-Identifier: GPL-2.0-only
- obj-$(CONFIG_BCM2835_POWER)	+= bcm2835-power.o
- obj-$(CONFIG_RASPBERRYPI_POWER)	+= raspberrypi-power.o
-+obj-y				+= bcm63xx/
- obj-$(CONFIG_SOC_BRCMSTB)	+= brcmstb/
diff --git a/target/linux/bcm4908/patches-5.4/082-v5.12-0003-soc-bcm-brcmstb-add-stubs-for-getting-platform-IDs.patch b/target/linux/bcm4908/patches-5.4/082-v5.12-0003-soc-bcm-brcmstb-add-stubs-for-getting-platform-IDs.patch
deleted file mode 100644
index aab65925b4..0000000000
--- a/target/linux/bcm4908/patches-5.4/082-v5.12-0003-soc-bcm-brcmstb-add-stubs-for-getting-platform-IDs.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 149ae80b1d50e7db5ac7df1cdf0820017b70e716 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 14 Jan 2021 11:53:18 +0100
-Subject: [PATCH] soc: bcm: brcmstb: add stubs for getting platform IDs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some brcmstb drivers may be shared with other SoC families. E.g. the
-same USB PHY block is shared by brcmstb and BCM4908.
-
-To avoid building brcmstb common code on non-brcmstb platforms we need
-stubs for:
-1. brcmstb_get_family_id()
-2. brcmstb_get_product_id()
-(to avoid "undefined reference to" errors).
-
-With this change PHY_BRCM_USB will not have to unconditionally select
-SOC_BRCMSTB anymore.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- include/linux/soc/brcmstb/brcmstb.h | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/include/linux/soc/brcmstb/brcmstb.h
-+++ b/include/linux/soc/brcmstb/brcmstb.h
-@@ -2,6 +2,8 @@
- #ifndef __BRCMSTB_SOC_H
- #define __BRCMSTB_SOC_H
- 
-+#include <linux/kconfig.h>
-+
- static inline u32 BRCM_ID(u32 reg)
- {
- 	return reg >> 28 ? reg >> 16 : reg >> 8;
-@@ -12,6 +14,8 @@ static inline u32 BRCM_REV(u32 reg)
- 	return reg & 0xff;
- }
- 
-+#if IS_ENABLED(CONFIG_SOC_BRCMSTB)
-+
- /*
-  * Helper functions for getting family or product id from the
-  * SoC driver.
-@@ -19,4 +23,16 @@ static inline u32 BRCM_REV(u32 reg)
- u32 brcmstb_get_family_id(void);
- u32 brcmstb_get_product_id(void);
- 
-+#else
-+static inline u32 brcmstb_get_family_id(void)
-+{
-+	return 0;
-+}
-+
-+static inline u32 brcmstb_get_product_id(void)
-+{
-+	return 0;
-+}
-+#endif
-+
- #endif /* __BRCMSTB_SOC_H */
diff --git a/target/linux/bcm4908/patches-5.4/083-v5.5-0001-phy-phy-brcm-usb-init-fix-__iomem-annotations.patch b/target/linux/bcm4908/patches-5.4/083-v5.5-0001-phy-phy-brcm-usb-init-fix-__iomem-annotations.patch
deleted file mode 100644
index 90f6224386..0000000000
--- a/target/linux/bcm4908/patches-5.4/083-v5.5-0001-phy-phy-brcm-usb-init-fix-__iomem-annotations.patch
+++ /dev/null
@@ -1,286 +0,0 @@
-From e4b957d3a7c74749e2ccfb3dedb63b81e84b292c Mon Sep 17 00:00:00 2001
-From: Ben Dooks <ben.dooks@codethink.co.uk>
-Date: Tue, 15 Oct 2019 17:03:31 +0100
-Subject: [PATCH] phy: phy-brcm-usb-init: fix __iomem annotations
-
-The register address should have __iomem attributes
-so fix this to remove the following sparse warnings:
-
-drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:459:30:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:459:30:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:461:30:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:461:30:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:465:30:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:465:30:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:469:30:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:469:30:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:478:30:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:478:30:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:480:30:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:480:30:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:485:30:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:485:30:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:494:9:    expected void [noderef] <asn:2> *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:494:9:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:495:9:    expected void [noderef] <asn:2> *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:495:9:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:498:9:    expected void [noderef] <asn:2> *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:498:9:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:501:9:    expected void [noderef] <asn:2> *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:501:9:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:613:9:    expected void [noderef] <asn:2> *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:613:9:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:640:9:    expected void [noderef] <asn:2> *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:640:9:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:710:64: warning: Using plain integer as NULL pointer
-drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:712:32:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:712:32:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:713:29:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:713:29:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:717:29:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:717:29:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:720:9:    expected void [noderef] <asn:2> *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:720:9:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:721:9:    expected void [noderef] <asn:2> *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:721:9:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:794:29:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:794:29:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:813:29:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:813:29:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:829:37:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:829:37:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:843:37:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:843:37:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:847:37:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:847:37:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:878:9:    expected void [noderef] <asn:2> *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:878:9:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:880:29:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:880:29:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:896:29:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:896:29:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:901:37:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:901:37:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: warning: cast removes address space '<asn:2>' of expression
-drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:905:37:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:905:37:    got void *
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
-drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
-drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: too many warnings
-
-Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/broadcom/phy-brcm-usb-init.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb-init.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
-@@ -126,8 +126,8 @@ enum {
- 	USB_CTRL_SELECTOR_COUNT,
- };
- 
--#define USB_CTRL_REG(base, reg)	((void *)base + USB_CTRL_##reg)
--#define USB_XHCI_EC_REG(base, reg) ((void *)base + USB_XHCI_EC_##reg)
-+#define USB_CTRL_REG(base, reg)	((void __iomem *)base + USB_CTRL_##reg)
-+#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg)
- #define USB_CTRL_MASK(reg, field) \
- 	USB_CTRL_##reg##_##field##_MASK
- #define USB_CTRL_MASK_FAMILY(params, reg, field)			\
-@@ -416,7 +416,7 @@ void usb_ctrl_unset_family(struct brcm_u
- 			   u32 reg_offset, u32 field)
- {
- 	u32 mask;
--	void *reg;
-+	void __iomem *reg;
- 
- 	mask = params->usb_reg_bits_map[field];
- 	reg = params->ctrl_regs + reg_offset;
-@@ -428,7 +428,7 @@ void usb_ctrl_set_family(struct brcm_usb
- 			 u32 reg_offset, u32 field)
- {
- 	u32 mask;
--	void *reg;
-+	void __iomem *reg;
- 
- 	mask = params->usb_reg_bits_map[field];
- 	reg = params->ctrl_regs + reg_offset;
diff --git a/target/linux/bcm4908/patches-5.4/083-v5.5-0002-phy-phy-brcm-usb-init-fix-use-of-integer-as-pointer.patch b/target/linux/bcm4908/patches-5.4/083-v5.5-0002-phy-phy-brcm-usb-init-fix-use-of-integer-as-pointer.patch
deleted file mode 100644
index 9252c35fb9..0000000000
--- a/target/linux/bcm4908/patches-5.4/083-v5.5-0002-phy-phy-brcm-usb-init-fix-use-of-integer-as-pointer.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 1025cb924bd517f3c458f36973582d4c2adedd6a Mon Sep 17 00:00:00 2001
-From: Ben Dooks <ben.dooks@codethink.co.uk>
-Date: Tue, 15 Oct 2019 17:03:32 +0100
-Subject: [PATCH] phy: phy-brcm-usb-init: fix use of integer as pointer
-
-The xhci_ec_base variable is a pointer, so don't compare
-it with an integer.
-
-Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
-Reviewed-by: Andrew Murray <andrew.murray@arm.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/broadcom/phy-brcm-usb-init.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb-init.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
-@@ -707,7 +707,7 @@ static void brcmusb_usb3_otp_fix(struct
- 	void __iomem *xhci_ec_base = params->xhci_ec_regs;
- 	u32 val;
- 
--	if (params->family_id != 0x74371000 || xhci_ec_base == 0)
-+	if (params->family_id != 0x74371000 || !xhci_ec_base)
- 		return;
- 	brcmusb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR));
- 	val = brcmusb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0001-phy-usb-EHCI-DMA-may-lose-a-burst-of-DMA-data-for-72.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0001-phy-usb-EHCI-DMA-may-lose-a-burst-of-DMA-data-for-72.patch
deleted file mode 100644
index ac368d5dd1..0000000000
--- a/target/linux/bcm4908/patches-5.4/084-v5.6-0001-phy-usb-EHCI-DMA-may-lose-a-burst-of-DMA-data-for-72.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From dc9aa43c43668481089c48135707ec3f8f5b2e19 Mon Sep 17 00:00:00 2001
-From: Al Cooper <alcooperx@gmail.com>
-Date: Fri, 3 Jan 2020 13:17:59 -0500
-Subject: [PATCH] phy: usb: EHCI DMA may lose a burst of DMA data for 7255xA0
- family
-
-When the EHCI controller received a 512 byte USB packet that
-had to be broken into 2 256 byte bursts across the SCB bus AND
-there was a following 512 byte USB packet, the second burst of
-data from the first packet was sometimes being lost. If the
-burst size was changed to 128 bytes via the EBR_SCB_SIZE field
-in the USB_CTRL_EBRIDGE register we'd see the 4th 128 byte burst
-of the first packet being lost. This problem became much worse
-if other threads were running that accessed memory, like a memcpy
-test. Setting the EBR_SCB_SIZE to 512, which prevents breaking
-the EHCI USB packet (max size of 512 bytes) into bursts, fixed
-the problem.
-
-Signed-off-by: Al Cooper <alcooperx@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/broadcom/phy-brcm-usb-init.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/drivers/phy/broadcom/phy-brcm-usb-init.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
-@@ -42,6 +42,7 @@
- #define   USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK		0x80000000 /* option */
- #define USB_CTRL_EBRIDGE		0x0c
- #define   USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK		0x00020000 /* option */
-+#define   USB_CTRL_EBRIDGE_EBR_SCB_SIZE_MASK		0x00000f80 /* option */
- #define USB_CTRL_OBRIDGE		0x10
- #define   USB_CTRL_OBRIDGE_LS_KEEP_ALIVE_MASK		0x08000000
- #define USB_CTRL_MDIO			0x14
-@@ -176,6 +177,7 @@ static const struct id_to_type id_to_typ
- 	{ 0x33900000, BRCM_FAMILY_3390A0 },
- 	{ 0x72500010, BRCM_FAMILY_7250B0 },
- 	{ 0x72600000, BRCM_FAMILY_7260A0 },
-+	{ 0x72550000, BRCM_FAMILY_7260A0 },
- 	{ 0x72680000, BRCM_FAMILY_7271A0 },
- 	{ 0x72710000, BRCM_FAMILY_7271A0 },
- 	{ 0x73640000, BRCM_FAMILY_7364A0 },
-@@ -948,6 +950,17 @@ void brcm_usb_init_eohci(struct brcm_usb
- 	if (params->selected_family == BRCM_FAMILY_7271A0)
- 		/* Enable LS keep alive fix for certain keyboards */
- 		USB_CTRL_SET(ctrl, OBRIDGE, LS_KEEP_ALIVE);
-+
-+	if (params->family_id == 0x72550000) {
-+		/*
-+		 * Make the burst size 512 bytes to fix a hardware bug
-+		 * on the 7255a0. See HW7255-24.
-+		 */
-+		reg = brcmusb_readl(USB_CTRL_REG(ctrl, EBRIDGE));
-+		reg &= ~USB_CTRL_MASK(EBRIDGE, EBR_SCB_SIZE);
-+		reg |= 0x800;
-+		brcmusb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE));
-+	}
- }
- 
- void brcm_usb_init_xhci(struct brcm_usb_init_params *params)
diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0002-phy-usb-Get-all-drivers-that-use-USB-clks-using-corr.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0002-phy-usb-Get-all-drivers-that-use-USB-clks-using-corr.patch
deleted file mode 100644
index e269f80cf4..0000000000
--- a/target/linux/bcm4908/patches-5.4/084-v5.6-0002-phy-usb-Get-all-drivers-that-use-USB-clks-using-corr.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From ece5ffd9e15e9c8471e58b581a098032a679d34e Mon Sep 17 00:00:00 2001
-From: Al Cooper <alcooperx@gmail.com>
-Date: Fri, 3 Jan 2020 13:18:00 -0500
-Subject: [PATCH] phy: usb: Get all drivers that use USB clks using correct
- enable/disable
-
-The BRCM USB Phy, ohci, ehci and xhci drivers all use the USB clocks
-but not all drivers use the clk_prepare_enable/clk_disable_unprepare
-versions to enable/disable the clocks. This change gets all drivers
-using the prepare version.
-
-Signed-off-by: Al Cooper <alcooperx@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/broadcom/phy-brcm-usb.c | 28 ++++++++++++++--------------
- 1 file changed, 14 insertions(+), 14 deletions(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -74,8 +74,8 @@ static int brcm_usb_phy_init(struct phy
- 	 */
- 	mutex_lock(&priv->mutex);
- 	if (priv->init_count++ == 0) {
--		clk_enable(priv->usb_20_clk);
--		clk_enable(priv->usb_30_clk);
-+		clk_prepare_enable(priv->usb_20_clk);
-+		clk_prepare_enable(priv->usb_30_clk);
- 		brcm_usb_init_common(&priv->ini);
- 	}
- 	mutex_unlock(&priv->mutex);
-@@ -106,8 +106,8 @@ static int brcm_usb_phy_exit(struct phy
- 	mutex_lock(&priv->mutex);
- 	if (--priv->init_count == 0) {
- 		brcm_usb_uninit_common(&priv->ini);
--		clk_disable(priv->usb_20_clk);
--		clk_disable(priv->usb_30_clk);
-+		clk_disable_unprepare(priv->usb_20_clk);
-+		clk_disable_unprepare(priv->usb_30_clk);
- 	}
- 	mutex_unlock(&priv->mutex);
- 	phy->inited = false;
-@@ -360,8 +360,8 @@ static int brcm_usb_phy_probe(struct pla
- 	if (priv->has_eohci)
- 		brcm_usb_uninit_eohci(&priv->ini);
- 	brcm_usb_uninit_common(&priv->ini);
--	clk_disable(priv->usb_20_clk);
--	clk_disable(priv->usb_30_clk);
-+	clk_disable_unprepare(priv->usb_20_clk);
-+	clk_disable_unprepare(priv->usb_30_clk);
- 
- 	phy_provider = devm_of_phy_provider_register(dev, brcm_usb_phy_xlate);
- 
-@@ -381,8 +381,8 @@ static int brcm_usb_phy_suspend(struct d
- 	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
- 
- 	if (priv->init_count) {
--		clk_disable(priv->usb_20_clk);
--		clk_disable(priv->usb_30_clk);
-+		clk_disable_unprepare(priv->usb_20_clk);
-+		clk_disable_unprepare(priv->usb_30_clk);
- 	}
- 	return 0;
- }
-@@ -391,8 +391,8 @@ static int brcm_usb_phy_resume(struct de
- {
- 	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
- 
--	clk_enable(priv->usb_20_clk);
--	clk_enable(priv->usb_30_clk);
-+	clk_prepare_enable(priv->usb_20_clk);
-+	clk_prepare_enable(priv->usb_30_clk);
- 	brcm_usb_init_ipp(&priv->ini);
- 
- 	/*
-@@ -405,13 +405,13 @@ static int brcm_usb_phy_resume(struct de
- 			brcm_usb_init_eohci(&priv->ini);
- 		} else if (priv->has_eohci) {
- 			brcm_usb_uninit_eohci(&priv->ini);
--			clk_disable(priv->usb_20_clk);
-+			clk_disable_unprepare(priv->usb_20_clk);
- 		}
- 		if (priv->phys[BRCM_USB_PHY_3_0].inited) {
- 			brcm_usb_init_xhci(&priv->ini);
- 		} else if (priv->has_xhci) {
- 			brcm_usb_uninit_xhci(&priv->ini);
--			clk_disable(priv->usb_30_clk);
-+			clk_disable_unprepare(priv->usb_30_clk);
- 		}
- 	} else {
- 		if (priv->has_xhci)
-@@ -419,8 +419,8 @@ static int brcm_usb_phy_resume(struct de
- 		if (priv->has_eohci)
- 			brcm_usb_uninit_eohci(&priv->ini);
- 		brcm_usb_uninit_common(&priv->ini);
--		clk_disable(priv->usb_20_clk);
--		clk_disable(priv->usb_30_clk);
-+		clk_disable_unprepare(priv->usb_20_clk);
-+		clk_disable_unprepare(priv->usb_30_clk);
- 	}
- 
- 	return 0;
diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0003-phy-usb-Put-USB-phys-into-IDDQ-on-suspend-to-save-po.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0003-phy-usb-Put-USB-phys-into-IDDQ-on-suspend-to-save-po.patch
deleted file mode 100644
index 356e305460..0000000000
--- a/target/linux/bcm4908/patches-5.4/084-v5.6-0003-phy-usb-Put-USB-phys-into-IDDQ-on-suspend-to-save-po.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 6597af4e4835ec0709638d48f73c11b5c624790f Mon Sep 17 00:00:00 2001
-From: Al Cooper <alcooperx@gmail.com>
-Date: Fri, 3 Jan 2020 13:18:01 -0500
-Subject: [PATCH] phy: usb: Put USB phys into IDDQ on suspend to save power in
- S2 mode
-
-Currently the Phy driver will put the USB phys into the max
-power saving mode (IDDQ) when there is no corresponding XHCI, EHCI
-or OHCI client (through rmmod, unbind or if the driver is not
-builtin). This change will also put the Phys into IDDQ mode
-on suspend so that S2 will get the additional power savings.
-
-Signed-off-by: Al Cooper <alcooperx@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/broadcom/phy-brcm-usb-init.c |  2 --
- drivers/phy/broadcom/phy-brcm-usb.c      | 11 +++++++++--
- 2 files changed, 9 insertions(+), 4 deletions(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb-init.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
-@@ -1002,8 +1002,6 @@ void brcm_usb_uninit_common(struct brcm_
- 
- void brcm_usb_uninit_eohci(struct brcm_usb_init_params *params)
- {
--	if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB))
--		USB_CTRL_UNSET_FAMILY(params, USB_PM, USB20_HC_RESETB);
- }
- 
- void brcm_usb_uninit_xhci(struct brcm_usb_init_params *params)
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -381,8 +381,15 @@ static int brcm_usb_phy_suspend(struct d
- 	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
- 
- 	if (priv->init_count) {
--		clk_disable_unprepare(priv->usb_20_clk);
--		clk_disable_unprepare(priv->usb_30_clk);
-+		if (priv->phys[BRCM_USB_PHY_3_0].inited)
-+			brcm_usb_uninit_xhci(&priv->ini);
-+		if (priv->phys[BRCM_USB_PHY_2_0].inited)
-+			brcm_usb_uninit_eohci(&priv->ini);
-+		brcm_usb_uninit_common(&priv->ini);
-+		if (priv->phys[BRCM_USB_PHY_3_0].inited)
-+			clk_disable_unprepare(priv->usb_30_clk);
-+		if (priv->phys[BRCM_USB_PHY_2_0].inited)
-+			clk_disable_unprepare(priv->usb_20_clk);
- 	}
- 	return 0;
- }
diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0004-phy-usb-Add-wake-on-functionality.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0004-phy-usb-Add-wake-on-functionality.patch
deleted file mode 100644
index d52edfef77..0000000000
--- a/target/linux/bcm4908/patches-5.4/084-v5.6-0004-phy-usb-Add-wake-on-functionality.patch
+++ /dev/null
@@ -1,205 +0,0 @@
-From f1c0db40a3ade1f1a39e5794d728f2953d817322 Mon Sep 17 00:00:00 2001
-From: Al Cooper <alcooperx@gmail.com>
-Date: Fri, 3 Jan 2020 13:18:02 -0500
-Subject: [PATCH] phy: usb: Add "wake on" functionality
-
-Add the ability to handle USB wake events from USB devices when
-in S2 mode. Typically there is some additional configuration
-needed to tell the USB device to generate the wake event when
-suspended but this varies with the different USB device classes.
-For example, on USB Ethernet dongles, ethtool should be used to
-enable the magic packet wake functionality in the dongle.
-NOTE:  This requires that the "power/wakeup" sysfs entry for
-the USB device generating the wakeup be set to "enabled".
-
-This functionality requires a special hardware sideband path that
-will trigger the AON_PM_L2 interrupt needed to wake the system from
-S2 even though the USB host controllers are in IDDQ (low power state)
-and most USB related clocks are shut off. For the sideband signaling
-to work we need to leave the usbx_freerun clock running, but this
-clock consumes very little power by design. There's a bug in the
-XHCI wake hardware so only EHCI/OHCI wake is currently supported.
-
-Signed-off-by: Al Cooper <alcooperx@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/broadcom/phy-brcm-usb-init.c | 17 +++++++++
- drivers/phy/broadcom/phy-brcm-usb-init.h |  1 +
- drivers/phy/broadcom/phy-brcm-usb.c      | 48 ++++++++++++++++++++++--
- 3 files changed, 63 insertions(+), 3 deletions(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb-init.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
-@@ -58,6 +58,8 @@
- #define   USB_CTRL_USB_PM_SOFT_RESET_MASK		0x40000000 /* option */
- #define   USB_CTRL_USB_PM_USB20_HC_RESETB_MASK		0x30000000 /* option */
- #define   USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK	0x00300000 /* option */
-+#define   USB_CTRL_USB_PM_RMTWKUP_EN_MASK		0x00000001
-+#define USB_CTRL_USB_PM_STATUS		0x38
- #define USB_CTRL_USB30_CTL1		0x60
- #define   USB_CTRL_USB30_CTL1_PHY3_PLL_SEQ_START_MASK	0x00000010
- #define   USB_CTRL_USB30_CTL1_PHY3_RESETB_MASK		0x00010000
-@@ -855,6 +857,10 @@ void brcm_usb_init_common(struct brcm_us
- 	u32 reg;
- 	void __iomem *ctrl = params->ctrl_regs;
- 
-+	/* Clear any pending wake conditions */
-+	reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS));
-+	brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS));
-+
- 	/* Take USB out of power down */
- 	if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) {
- 		USB_CTRL_UNSET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN);
-@@ -1010,6 +1016,17 @@ void brcm_usb_uninit_xhci(struct brcm_us
- 	USB_CTRL_SET(params->ctrl_regs, USB30_PCTL, PHY3_IDDQ_OVERRIDE);
- }
- 
-+void brcm_usb_wake_enable(struct brcm_usb_init_params *params,
-+			  int enable)
-+{
-+	void __iomem *ctrl = params->ctrl_regs;
-+
-+	if (enable)
-+		USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN);
-+	else
-+		USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN);
-+}
-+
- void brcm_usb_set_family_map(struct brcm_usb_init_params *params)
- {
- 	int fam;
---- a/drivers/phy/broadcom/phy-brcm-usb-init.h
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
-@@ -38,5 +38,6 @@ void brcm_usb_init_xhci(struct brcm_usb_
- void brcm_usb_uninit_common(struct brcm_usb_init_params *ini);
- void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini);
- void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini);
-+void brcm_usb_wake_enable(struct brcm_usb_init_params *params, int enable);
- 
- #endif /* _USB_BRCM_COMMON_INIT_H */
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -57,11 +57,22 @@ struct brcm_usb_phy_data {
- 	bool			has_xhci;
- 	struct clk		*usb_20_clk;
- 	struct clk		*usb_30_clk;
-+	struct clk		*suspend_clk;
- 	struct mutex		mutex;	/* serialize phy init */
- 	int			init_count;
-+	int			wake_irq;
- 	struct brcm_usb_phy	phys[BRCM_USB_PHY_ID_MAX];
- };
- 
-+static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id)
-+{
-+	struct phy *gphy = dev_id;
-+
-+	pm_wakeup_event(&gphy->dev, 0);
-+
-+	return IRQ_HANDLED;
-+}
-+
- static int brcm_usb_phy_init(struct phy *gphy)
- {
- 	struct brcm_usb_phy *phy = phy_get_drvdata(gphy);
-@@ -76,6 +87,7 @@ static int brcm_usb_phy_init(struct phy
- 	if (priv->init_count++ == 0) {
- 		clk_prepare_enable(priv->usb_20_clk);
- 		clk_prepare_enable(priv->usb_30_clk);
-+		clk_prepare_enable(priv->suspend_clk);
- 		brcm_usb_init_common(&priv->ini);
- 	}
- 	mutex_unlock(&priv->mutex);
-@@ -108,6 +120,7 @@ static int brcm_usb_phy_exit(struct phy
- 		brcm_usb_uninit_common(&priv->ini);
- 		clk_disable_unprepare(priv->usb_20_clk);
- 		clk_disable_unprepare(priv->usb_30_clk);
-+		clk_disable_unprepare(priv->suspend_clk);
- 	}
- 	mutex_unlock(&priv->mutex);
- 	phy->inited = false;
-@@ -228,11 +241,12 @@ static const struct attribute_group brcm
- 	.attrs = brcm_usb_phy_attrs,
- };
- 
--static int brcm_usb_phy_dvr_init(struct device *dev,
-+static int brcm_usb_phy_dvr_init(struct platform_device *pdev,
- 				 struct brcm_usb_phy_data *priv,
- 				 struct device_node *dn)
- {
--	struct phy *gphy;
-+	struct device *dev = &pdev->dev;
-+	struct phy *gphy = NULL;
- 	int err;
- 
- 	priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb");
-@@ -275,6 +289,28 @@ static int brcm_usb_phy_dvr_init(struct
- 		if (err)
- 			return err;
- 	}
-+
-+	priv->suspend_clk = clk_get(dev, "usb0_freerun");
-+	if (IS_ERR(priv->suspend_clk)) {
-+		dev_err(dev, "Suspend Clock not found in Device Tree\n");
-+		priv->suspend_clk = NULL;
-+	}
-+
-+	priv->wake_irq = platform_get_irq_byname(pdev, "wake");
-+	if (priv->wake_irq < 0)
-+		priv->wake_irq = platform_get_irq_byname(pdev, "wakeup");
-+	if (priv->wake_irq >= 0) {
-+		err = devm_request_irq(dev, priv->wake_irq,
-+				       brcm_usb_phy_wake_isr, 0,
-+				       dev_name(dev), gphy);
-+		if (err < 0)
-+			return err;
-+		device_set_wakeup_capable(dev, 1);
-+	} else {
-+		dev_info(dev,
-+			 "Wake interrupt missing, system wake not supported\n");
-+	}
-+
- 	return 0;
- }
- 
-@@ -335,7 +371,7 @@ static int brcm_usb_phy_probe(struct pla
- 	if (of_property_read_bool(dn, "brcm,has-eohci"))
- 		priv->has_eohci = true;
- 
--	err = brcm_usb_phy_dvr_init(dev, priv, dn);
-+	err = brcm_usb_phy_dvr_init(pdev, priv, dn);
- 	if (err)
- 		return err;
- 
-@@ -386,10 +422,13 @@ static int brcm_usb_phy_suspend(struct d
- 		if (priv->phys[BRCM_USB_PHY_2_0].inited)
- 			brcm_usb_uninit_eohci(&priv->ini);
- 		brcm_usb_uninit_common(&priv->ini);
-+		brcm_usb_wake_enable(&priv->ini, true);
- 		if (priv->phys[BRCM_USB_PHY_3_0].inited)
- 			clk_disable_unprepare(priv->usb_30_clk);
- 		if (priv->phys[BRCM_USB_PHY_2_0].inited)
- 			clk_disable_unprepare(priv->usb_20_clk);
-+		if (priv->wake_irq >= 0)
-+			enable_irq_wake(priv->wake_irq);
- 	}
- 	return 0;
- }
-@@ -400,6 +439,7 @@ static int brcm_usb_phy_resume(struct de
- 
- 	clk_prepare_enable(priv->usb_20_clk);
- 	clk_prepare_enable(priv->usb_30_clk);
-+	brcm_usb_wake_enable(&priv->ini, false);
- 	brcm_usb_init_ipp(&priv->ini);
- 
- 	/*
-@@ -407,6 +447,8 @@ static int brcm_usb_phy_resume(struct de
- 	 * Uninitialize anything that wasn't previously initialized.
- 	 */
- 	if (priv->init_count) {
-+		if (priv->wake_irq >= 0)
-+			disable_irq_wake(priv->wake_irq);
- 		brcm_usb_init_common(&priv->ini);
- 		if (priv->phys[BRCM_USB_PHY_2_0].inited) {
- 			brcm_usb_init_eohci(&priv->ini);
diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0005-phy-usb-Restructure-in-preparation-for-adding-7216-U.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0005-phy-usb-Restructure-in-preparation-for-adding-7216-U.patch
deleted file mode 100644
index 2a63556122..0000000000
--- a/target/linux/bcm4908/patches-5.4/084-v5.6-0005-phy-usb-Restructure-in-preparation-for-adding-7216-U.patch
+++ /dev/null
@@ -1,611 +0,0 @@
-From 94583a41047eb9489f576344b8ba9370cf4cbfb7 Mon Sep 17 00:00:00 2001
-From: Al Cooper <alcooperx@gmail.com>
-Date: Fri, 3 Jan 2020 13:18:03 -0500
-Subject: [PATCH] phy: usb: Restructure in preparation for adding 7216 USB
- support
-
-The driver is being restructured in preparation for adding support
-for the new Synopsys USB conroller on the 7216. Since all the bugs
-and work-arounds in previous STB chips are supposed to be fixed,
-most of the code in phy-brcm-usb-init.c is not needed. Instead of
-adding more complexity to the already complicated phy-brcm-usb-init.c
-module, the driver will be restructured to use a vector table to
-dispatch into different C modules for the different controllers.
-
-There was also some general cleanup done including some ipp setup
-code that was incorrect.
-
-Signed-off-by: Al Cooper <alcooperx@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/broadcom/phy-brcm-usb-init.c | 191 ++++++++++-------------
- drivers/phy/broadcom/phy-brcm-usb-init.h | 140 +++++++++++++++--
- drivers/phy/broadcom/phy-brcm-usb.c      |   6 +-
- 3 files changed, 214 insertions(+), 123 deletions(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb-init.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
-@@ -129,10 +129,6 @@ enum {
- 	USB_CTRL_SELECTOR_COUNT,
- };
- 
--#define USB_CTRL_REG(base, reg)	((void __iomem *)base + USB_CTRL_##reg)
--#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg)
--#define USB_CTRL_MASK(reg, field) \
--	USB_CTRL_##reg##_##field##_MASK
- #define USB_CTRL_MASK_FAMILY(params, reg, field)			\
- 	(params->usb_reg_bits_map[USB_CTRL_##reg##_##field##_SELECTOR])
- 
-@@ -143,13 +139,6 @@ enum {
- 	usb_ctrl_unset_family(params, USB_CTRL_##reg,	\
- 		USB_CTRL_##reg##_##field##_SELECTOR)
- 
--#define USB_CTRL_SET(base, reg, field)	\
--	usb_ctrl_set(USB_CTRL_REG(base, reg),		\
--		     USB_CTRL_##reg##_##field##_MASK)
--#define USB_CTRL_UNSET(base, reg, field)	\
--	usb_ctrl_unset(USB_CTRL_REG(base, reg),		\
--		       USB_CTRL_##reg##_##field##_MASK)
--
- #define MDIO_USB2	0
- #define MDIO_USB3	BIT(31)
- 
-@@ -405,26 +394,14 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT
- 	},
- };
- 
--static inline u32 brcmusb_readl(void __iomem *addr)
--{
--	return readl(addr);
--}
--
--static inline void brcmusb_writel(u32 val, void __iomem *addr)
--{
--	writel(val, addr);
--}
--
- static inline
- void usb_ctrl_unset_family(struct brcm_usb_init_params *params,
- 			   u32 reg_offset, u32 field)
- {
- 	u32 mask;
--	void __iomem *reg;
- 
- 	mask = params->usb_reg_bits_map[field];
--	reg = params->ctrl_regs + reg_offset;
--	brcmusb_writel(brcmusb_readl(reg) & ~mask, reg);
-+	brcm_usb_ctrl_unset(params->ctrl_regs + reg_offset, mask);
- };
- 
- static inline
-@@ -432,45 +409,27 @@ void usb_ctrl_set_family(struct brcm_usb
- 			 u32 reg_offset, u32 field)
- {
- 	u32 mask;
--	void __iomem *reg;
- 
- 	mask = params->usb_reg_bits_map[field];
--	reg = params->ctrl_regs + reg_offset;
--	brcmusb_writel(brcmusb_readl(reg) | mask, reg);
-+	brcm_usb_ctrl_set(params->ctrl_regs + reg_offset, mask);
- };
- 
--static inline void usb_ctrl_set(void __iomem *reg, u32 field)
--{
--	u32 value;
--
--	value = brcmusb_readl(reg);
--	brcmusb_writel(value | field, reg);
--}
--
--static inline void usb_ctrl_unset(void __iomem *reg, u32 field)
--{
--	u32 value;
--
--	value = brcmusb_readl(reg);
--	brcmusb_writel(value & ~field, reg);
--}
--
- static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode)
- {
- 	u32 data;
- 
- 	data = (reg << 16) | mode;
--	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
-+	brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
- 	data |= (1 << 24);
--	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
-+	brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
- 	data &= ~(1 << 24);
- 	/* wait for the 60MHz parallel to serial shifter */
- 	usleep_range(10, 20);
--	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
-+	brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
- 	/* wait for the 60MHz parallel to serial shifter */
- 	usleep_range(10, 20);
- 
--	return brcmusb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff;
-+	return brcm_usb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff;
- }
- 
- static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg,
-@@ -479,14 +438,14 @@ static void brcmusb_usb_mdio_write(void
- 	u32 data;
- 
- 	data = (reg << 16) | val | mode;
--	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
-+	brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
- 	data |= (1 << 25);
--	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
-+	brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
- 	data &= ~(1 << 25);
- 
- 	/* wait for the 60MHz parallel to serial shifter */
- 	usleep_range(10, 20);
--	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
-+	brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
- 	/* wait for the 60MHz parallel to serial shifter */
- 	usleep_range(10, 20);
- }
-@@ -713,12 +672,12 @@ static void brcmusb_usb3_otp_fix(struct
- 
- 	if (params->family_id != 0x74371000 || !xhci_ec_base)
- 		return;
--	brcmusb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR));
--	val = brcmusb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
-+	brcm_usb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR));
-+	val = brcm_usb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
- 
- 	/* set cfg_pick_ss_lock */
- 	val |= (1 << 27);
--	brcmusb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
-+	brcm_usb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
- 
- 	/* Reset USB 3.0 PHY for workaround to take effect */
- 	USB_CTRL_UNSET(params->ctrl_regs, USB30_CTL1, PHY3_RESETB);
-@@ -751,7 +710,7 @@ static void brcmusb_xhci_soft_reset(stru
-  *   - default chip/rev.
-  * NOTE: The minor rev is always ignored.
-  */
--static enum brcm_family_type brcmusb_get_family_type(
-+static enum brcm_family_type get_family_type(
- 	struct brcm_usb_init_params *params)
- {
- 	int last_type = -1;
-@@ -779,7 +738,7 @@ static enum brcm_family_type brcmusb_get
- 	return last_type;
- }
- 
--void brcm_usb_init_ipp(struct brcm_usb_init_params *params)
-+static void usb_init_ipp(struct brcm_usb_init_params *params)
- {
- 	void __iomem *ctrl = params->ctrl_regs;
- 	u32 reg;
-@@ -795,7 +754,7 @@ void brcm_usb_init_ipp(struct brcm_usb_i
- 			USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IPP);
- 	}
- 
--	reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP));
-+	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
- 	orig_reg = reg;
- 	if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_CC_DRD_MODE_ENABLE_SEL))
- 		/* Never use the strap, it's going away. */
-@@ -803,8 +762,8 @@ void brcm_usb_init_ipp(struct brcm_usb_i
- 					      SETUP,
- 					      STRAP_CC_DRD_MODE_ENABLE_SEL));
- 	if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_IPP_SEL))
-+		/* override ipp strap pin (if it exits) */
- 		if (params->ipp != 2)
--			/* override ipp strap pin (if it exits) */
- 			reg &= ~(USB_CTRL_MASK_FAMILY(params, SETUP,
- 						      STRAP_IPP_SEL));
- 
-@@ -812,54 +771,26 @@ void brcm_usb_init_ipp(struct brcm_usb_i
- 	reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC));
- 	if (params->ioc)
- 		reg |= USB_CTRL_MASK(SETUP, IOC);
--	if (params->ipp == 1 && ((reg & USB_CTRL_MASK(SETUP, IPP)) == 0))
-+	if (params->ipp == 1)
- 		reg |= USB_CTRL_MASK(SETUP, IPP);
--	brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
-+	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
- 
- 	/*
- 	 * If we're changing IPP, make sure power is off long enough
- 	 * to turn off any connected devices.
- 	 */
--	if (reg != orig_reg)
-+	if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP))
- 		msleep(50);
- }
- 
--int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params)
--{
--	void __iomem *ctrl = params->ctrl_regs;
--	u32 reg = 0;
--
--	if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
--		reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
--		reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
--					PORT_MODE);
--	}
--	return reg;
--}
--
--void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params,
--				   int mode)
--{
--	void __iomem *ctrl = params->ctrl_regs;
--	u32 reg;
--
--	if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
--		reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
--		reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
--					PORT_MODE);
--		reg |= mode;
--		brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
--	}
--}
--
--void brcm_usb_init_common(struct brcm_usb_init_params *params)
-+static void usb_init_common(struct brcm_usb_init_params *params)
- {
- 	u32 reg;
- 	void __iomem *ctrl = params->ctrl_regs;
- 
- 	/* Clear any pending wake conditions */
--	reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS));
--	brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS));
-+	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS));
-+	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS));
- 
- 	/* Take USB out of power down */
- 	if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) {
-@@ -885,7 +816,7 @@ void brcm_usb_init_common(struct brcm_us
- 	/* Block auto PLL suspend by USB2 PHY (Sasi) */
- 	USB_CTRL_SET(ctrl, PLL_CTL, PLL_SUSPEND_EN);
- 
--	reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP));
-+	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
- 	if (params->selected_family == BRCM_FAMILY_7364A0)
- 		/* Suppress overcurrent indication from USB30 ports for A0 */
- 		reg |= USB_CTRL_MASK_FAMILY(params, SETUP, OC3_DISABLE);
-@@ -901,16 +832,16 @@ void brcm_usb_init_common(struct brcm_us
- 		reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN);
- 	if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN))
- 		reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN);
--	brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
-+	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
- 
- 	brcmusb_memc_fix(params);
- 
- 	if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
--		reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
-+		reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
- 		reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
- 					PORT_MODE);
- 		reg |= params->mode;
--		brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
-+		brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
- 	}
- 	if (USB_CTRL_MASK_FAMILY(params, USB_PM, BDC_SOFT_RESETB)) {
- 		switch (params->mode) {
-@@ -932,7 +863,7 @@ void brcm_usb_init_common(struct brcm_us
- 	}
- }
- 
--void brcm_usb_init_eohci(struct brcm_usb_init_params *params)
-+static void usb_init_eohci(struct brcm_usb_init_params *params)
- {
- 	u32 reg;
- 	void __iomem *ctrl = params->ctrl_regs;
-@@ -948,10 +879,10 @@ void brcm_usb_init_eohci(struct brcm_usb
- 		USB_CTRL_SET(ctrl, EBRIDGE, ESTOP_SCB_REQ);
- 
- 	/* Setup the endian bits */
--	reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP));
-+	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
- 	reg &= ~USB_CTRL_SETUP_ENDIAN_BITS;
- 	reg |= USB_CTRL_MASK_FAMILY(params, SETUP, ENDIAN);
--	brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
-+	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
- 
- 	if (params->selected_family == BRCM_FAMILY_7271A0)
- 		/* Enable LS keep alive fix for certain keyboards */
-@@ -962,14 +893,14 @@ void brcm_usb_init_eohci(struct brcm_usb
- 		 * Make the burst size 512 bytes to fix a hardware bug
- 		 * on the 7255a0. See HW7255-24.
- 		 */
--		reg = brcmusb_readl(USB_CTRL_REG(ctrl, EBRIDGE));
-+		reg = brcm_usb_readl(USB_CTRL_REG(ctrl, EBRIDGE));
- 		reg &= ~USB_CTRL_MASK(EBRIDGE, EBR_SCB_SIZE);
- 		reg |= 0x800;
--		brcmusb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE));
-+		brcm_usb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE));
- 	}
- }
- 
--void brcm_usb_init_xhci(struct brcm_usb_init_params *params)
-+static void usb_init_xhci(struct brcm_usb_init_params *params)
- {
- 	void __iomem *ctrl = params->ctrl_regs;
- 
-@@ -997,7 +928,7 @@ void brcm_usb_init_xhci(struct brcm_usb_
- 	brcmusb_usb3_otp_fix(params);
- }
- 
--void brcm_usb_uninit_common(struct brcm_usb_init_params *params)
-+static void usb_uninit_common(struct brcm_usb_init_params *params)
- {
- 	if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN))
- 		USB_CTRL_SET_FAMILY(params, USB_PM, USB_PWRDN);
-@@ -1006,17 +937,47 @@ void brcm_usb_uninit_common(struct brcm_
- 		USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN);
- }
- 
--void brcm_usb_uninit_eohci(struct brcm_usb_init_params *params)
-+static void usb_uninit_eohci(struct brcm_usb_init_params *params)
- {
- }
- 
--void brcm_usb_uninit_xhci(struct brcm_usb_init_params *params)
-+static void usb_uninit_xhci(struct brcm_usb_init_params *params)
- {
- 	brcmusb_xhci_soft_reset(params, 1);
- 	USB_CTRL_SET(params->ctrl_regs, USB30_PCTL, PHY3_IDDQ_OVERRIDE);
- }
- 
--void brcm_usb_wake_enable(struct brcm_usb_init_params *params,
-+static int usb_get_dual_select(struct brcm_usb_init_params *params)
-+{
-+	void __iomem *ctrl = params->ctrl_regs;
-+	u32 reg = 0;
-+
-+	pr_debug("%s\n", __func__);
-+	if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
-+		reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
-+		reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
-+					PORT_MODE);
-+	}
-+	return reg;
-+}
-+
-+static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
-+{
-+	void __iomem *ctrl = params->ctrl_regs;
-+	u32 reg;
-+
-+	pr_debug("%s\n", __func__);
-+
-+	if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
-+		reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
-+		reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
-+					PORT_MODE);
-+		reg |= mode;
-+		brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
-+	}
-+}
-+
-+static void usb_wake_enable(struct brcm_usb_init_params *params,
- 			  int enable)
- {
- 	void __iomem *ctrl = params->ctrl_regs;
-@@ -1027,13 +988,29 @@ void brcm_usb_wake_enable(struct brcm_us
- 		USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN);
- }
- 
--void brcm_usb_set_family_map(struct brcm_usb_init_params *params)
-+static const struct brcm_usb_init_ops bcm7445_ops = {
-+	.init_ipp = usb_init_ipp,
-+	.init_common = usb_init_common,
-+	.init_eohci = usb_init_eohci,
-+	.init_xhci = usb_init_xhci,
-+	.uninit_common = usb_uninit_common,
-+	.uninit_eohci = usb_uninit_eohci,
-+	.uninit_xhci = usb_uninit_xhci,
-+	.get_dual_select = usb_get_dual_select,
-+	.set_dual_select = usb_set_dual_select,
-+	.wake_enable = usb_wake_enable,
-+};
-+
-+void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params)
- {
- 	int fam;
- 
--	fam = brcmusb_get_family_type(params);
-+	pr_debug("%s\n", __func__);
-+
-+	fam = get_family_type(params);
- 	params->selected_family = fam;
- 	params->usb_reg_bits_map =
- 		&usb_reg_bits_map_table[fam][0];
- 	params->family_name = family_names[fam];
-+	params->ops = &bcm7445_ops;
- }
---- a/drivers/phy/broadcom/phy-brcm-usb-init.h
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
-@@ -13,6 +13,33 @@
- 
- struct  brcm_usb_init_params;
- 
-+#define USB_CTRL_REG(base, reg)	((void __iomem *)base + USB_CTRL_##reg)
-+#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg)
-+#define USB_CTRL_MASK(reg, field) \
-+	USB_CTRL_##reg##_##field##_MASK
-+#define USB_CTRL_SET(base, reg, field)	\
-+	brcm_usb_ctrl_set(USB_CTRL_REG(base, reg),	\
-+			  USB_CTRL_##reg##_##field##_MASK)
-+#define USB_CTRL_UNSET(base, reg, field)	\
-+	brcm_usb_ctrl_unset(USB_CTRL_REG(base, reg),		\
-+			    USB_CTRL_##reg##_##field##_MASK)
-+
-+struct  brcm_usb_init_params;
-+
-+struct brcm_usb_init_ops {
-+	void (*init_ipp)(struct brcm_usb_init_params *params);
-+	void (*init_common)(struct brcm_usb_init_params *params);
-+	void (*init_eohci)(struct brcm_usb_init_params *params);
-+	void (*init_xhci)(struct brcm_usb_init_params *params);
-+	void (*uninit_common)(struct brcm_usb_init_params *params);
-+	void (*uninit_eohci)(struct brcm_usb_init_params *params);
-+	void (*uninit_xhci)(struct brcm_usb_init_params *params);
-+	int  (*get_dual_select)(struct brcm_usb_init_params *params);
-+	void (*set_dual_select)(struct brcm_usb_init_params *params, int mode);
-+	void (*wake_enable)(struct brcm_usb_init_params *params,
-+			    int enable);
-+};
-+
- struct  brcm_usb_init_params {
- 	void __iomem *ctrl_regs;
- 	void __iomem *xhci_ec_regs;
-@@ -24,20 +51,107 @@ struct  brcm_usb_init_params {
- 	int selected_family;
- 	const char *family_name;
- 	const u32 *usb_reg_bits_map;
-+	const struct brcm_usb_init_ops *ops;
- };
- 
--void brcm_usb_set_family_map(struct brcm_usb_init_params *params);
--int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params);
--void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params,
--				   int mode);
--
--void brcm_usb_init_ipp(struct brcm_usb_init_params *ini);
--void brcm_usb_init_common(struct brcm_usb_init_params *ini);
--void brcm_usb_init_eohci(struct brcm_usb_init_params *ini);
--void brcm_usb_init_xhci(struct brcm_usb_init_params *ini);
--void brcm_usb_uninit_common(struct brcm_usb_init_params *ini);
--void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini);
--void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini);
--void brcm_usb_wake_enable(struct brcm_usb_init_params *params, int enable);
-+void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params);
-+
-+static inline u32 brcm_usb_readl(void __iomem *addr)
-+{
-+	/*
-+	 * MIPS endianness is configured by boot strap, which also reverses all
-+	 * bus endianness (i.e., big-endian CPU + big endian bus ==> native
-+	 * endian I/O).
-+	 *
-+	 * Other architectures (e.g., ARM) either do not support big endian, or
-+	 * else leave I/O in little endian mode.
-+	 */
-+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
-+		return __raw_readl(addr);
-+	else
-+		return readl_relaxed(addr);
-+}
-+
-+static inline void brcm_usb_writel(u32 val, void __iomem *addr)
-+{
-+	/* See brcmnand_readl() comments */
-+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
-+		__raw_writel(val, addr);
-+	else
-+		writel_relaxed(val, addr);
-+}
-+
-+static inline void brcm_usb_ctrl_unset(void __iomem *reg, u32 mask)
-+{
-+	brcm_usb_writel(brcm_usb_readl(reg) & ~(mask), reg);
-+};
-+
-+static inline void brcm_usb_ctrl_set(void __iomem *reg, u32 mask)
-+{
-+	brcm_usb_writel(brcm_usb_readl(reg) | (mask), reg);
-+};
-+
-+static inline void brcm_usb_init_ipp(struct brcm_usb_init_params *ini)
-+{
-+	if (ini->ops->init_ipp)
-+		ini->ops->init_ipp(ini);
-+}
-+
-+static inline void brcm_usb_init_common(struct brcm_usb_init_params *ini)
-+{
-+	if (ini->ops->init_common)
-+		ini->ops->init_common(ini);
-+}
-+
-+static inline void brcm_usb_init_eohci(struct brcm_usb_init_params *ini)
-+{
-+	if (ini->ops->init_eohci)
-+		ini->ops->init_eohci(ini);
-+}
-+
-+static inline void brcm_usb_init_xhci(struct brcm_usb_init_params *ini)
-+{
-+	if (ini->ops->init_xhci)
-+		ini->ops->init_xhci(ini);
-+}
-+
-+static inline void brcm_usb_uninit_common(struct brcm_usb_init_params *ini)
-+{
-+	if (ini->ops->uninit_common)
-+		ini->ops->uninit_common(ini);
-+}
-+
-+static inline void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini)
-+{
-+	if (ini->ops->uninit_eohci)
-+		ini->ops->uninit_eohci(ini);
-+}
-+
-+static inline void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini)
-+{
-+	if (ini->ops->uninit_xhci)
-+		ini->ops->uninit_xhci(ini);
-+}
-+
-+static inline void brcm_usb_wake_enable(struct brcm_usb_init_params *ini,
-+	int enable)
-+{
-+	if (ini->ops->wake_enable)
-+		ini->ops->wake_enable(ini, enable);
-+}
-+
-+static inline int brcm_usb_get_dual_select(struct brcm_usb_init_params *ini)
-+{
-+	if (ini->ops->get_dual_select)
-+		return ini->ops->get_dual_select(ini);
-+	return 0;
-+}
-+
-+static inline void brcm_usb_set_dual_select(struct brcm_usb_init_params *ini,
-+	int mode)
-+{
-+	if (ini->ops->set_dual_select)
-+		ini->ops->set_dual_select(ini, mode);
-+}
- 
- #endif /* _USB_BRCM_COMMON_INIT_H */
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -207,7 +207,7 @@ static ssize_t dual_select_store(struct
- 	res = name_to_value(&brcm_dual_mode_to_name[0],
- 			    ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value);
- 	if (!res) {
--		brcm_usb_init_set_dual_select(&priv->ini, value);
-+		brcm_usb_set_dual_select(&priv->ini, value);
- 		res = len;
- 	}
- 	mutex_unlock(&sysfs_lock);
-@@ -222,7 +222,7 @@ static ssize_t dual_select_show(struct d
- 	int value;
- 
- 	mutex_lock(&sysfs_lock);
--	value = brcm_usb_init_get_dual_select(&priv->ini);
-+	value = brcm_usb_get_dual_select(&priv->ini);
- 	mutex_unlock(&sysfs_lock);
- 	return sprintf(buf, "%s\n",
- 		value_to_name(&brcm_dual_mode_to_name[0],
-@@ -331,7 +331,7 @@ static int brcm_usb_phy_probe(struct pla
- 
- 	priv->ini.family_id = brcmstb_get_family_id();
- 	priv->ini.product_id = brcmstb_get_product_id();
--	brcm_usb_set_family_map(&priv->ini);
-+	brcm_usb_dvr_init_7445(&priv->ini);
- 	dev_dbg(dev, "Best mapping table is for %s\n",
- 		priv->ini.family_name);
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0006-dt-bindings-Add-Broadcom-STB-USB-PHY-binding-documen.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0006-dt-bindings-Add-Broadcom-STB-USB-PHY-binding-documen.patch
deleted file mode 100644
index 2a57d1dc80..0000000000
--- a/target/linux/bcm4908/patches-5.4/084-v5.6-0006-dt-bindings-Add-Broadcom-STB-USB-PHY-binding-documen.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From b11df0c9efbbe2b52c5133ca15030f01b43ec6ef Mon Sep 17 00:00:00 2001
-From: Al Cooper <alcooperx@gmail.com>
-Date: Fri, 3 Jan 2020 13:18:04 -0500
-Subject: [PATCH] dt-bindings: Add Broadcom STB USB PHY binding document
-
-Add support for bcm7216 and bcm7211
-
-Signed-off-by: Al Cooper <alcooperx@gmail.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- .../bindings/phy/brcm,brcmstb-usb-phy.txt     | 69 +++++++++++++++----
- 1 file changed, 56 insertions(+), 13 deletions(-)
-
---- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
-+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
-@@ -1,30 +1,49 @@
- Broadcom STB USB PHY
- 
- Required properties:
-- - compatible: brcm,brcmstb-usb-phy
-- - reg: two offset and length pairs.
--	The first pair specifies a manditory set of memory mapped
--	registers used for general control of the PHY.
--	The second pair specifies optional registers used by some of
--	the SoCs that support USB 3.x
-- - #phy-cells: Shall be 1 as it expects one argument for setting
--	       the type of the PHY. Possible values are:
--	       - PHY_TYPE_USB2 for USB1.1/2.0 PHY
--	       - PHY_TYPE_USB3 for USB3.x PHY
-+- compatible: should be one of
-+	"brcm,brcmstb-usb-phy"
-+	"brcm,bcm7216-usb-phy"
-+	"brcm,bcm7211-usb-phy"
-+
-+- reg and reg-names properties requirements are specific to the
-+  compatible string.
-+  "brcm,brcmstb-usb-phy":
-+    - reg: 1 or 2 offset and length pairs. One for the base CTRL registers
-+           and an optional pair for systems with USB 3.x support
-+    - reg-names: not specified
-+  "brcm,bcm7216-usb-phy":
-+    - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL
-+           registers
-+    - reg-names: "ctrl", "xhci_ec", "xhci_gbl"
-+  "brcm,bcm7211-usb-phy":
-+    - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL,
-+           USB_PHY and USB_MDIO registers and an optional pair
-+	   for the BDC registers
-+    - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
-+
-+- #phy-cells: Shall be 1 as it expects one argument for setting
-+	      the type of the PHY. Possible values are:
-+	      - PHY_TYPE_USB2 for USB1.1/2.0 PHY
-+	      - PHY_TYPE_USB3 for USB3.x PHY
- 
- Optional Properties:
- - clocks : clock phandles.
- - clock-names: String, clock name.
-+- interrupts: wakeup interrupt
-+- interrupt-names: "wakeup"
- - brcm,ipp: Boolean, Invert Port Power.
-   Possible values are: 0 (Don't invert), 1 (Invert)
- - brcm,ioc: Boolean, Invert Over Current detection.
-   Possible values are: 0 (Don't invert), 1 (Invert)
--NOTE: one or both of the following two properties must be set
--- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
--- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
- - dr_mode: String, PHY Device mode.
-   Possible values are: "host", "peripheral ", "drd" or "typec-pd"
-   If this property is not defined, the phy will default to "host" mode.
-+- brcm,syscon-piarbctl: phandle to syscon for handling config registers
-+NOTE: one or both of the following two properties must be set
-+- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
-+- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
-+
- 
- Example:
- 
-@@ -41,3 +60,27 @@ usbphy_0: usb-phy@f0470200 {
- 	clocks = <&usb20>, <&usb30>;
- 	clock-names = "sw_usb", "sw_usb3";
- };
-+
-+usb-phy@29f0200 {
-+	reg = <0x29f0200 0x200>,
-+		<0x29c0880 0x30>,
-+		<0x29cc100 0x534>,
-+		<0x2808000 0x24>,
-+		<0x2980080 0x8>;
-+	reg-names = "ctrl",
-+		"xhci_ec",
-+		"xhci_gbl",
-+		"usb_phy",
-+		"usb_mdio";
-+	brcm,ioc = <0x0>;
-+	brcm,ipp = <0x0>;
-+	compatible = "brcm,bcm7211-usb-phy";
-+	interrupts = <0x30>;
-+	interrupt-parent = <&vpu_intr1_nosec_intc>;
-+	interrupt-names = "wake";
-+	#phy-cells = <0x1>;
-+	brcm,has-xhci;
-+	syscon-piarbctl = <&syscon_piarbctl>;
-+	clocks = <&scmi_clk 256>;
-+	clock-names = "sw_usb";
-+};
diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0007-phy-usb-Add-support-for-new-Synopsys-USB-controller-.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0007-phy-usb-Add-support-for-new-Synopsys-USB-controller-.patch
deleted file mode 100644
index 11cc080c23..0000000000
--- a/target/linux/bcm4908/patches-5.4/084-v5.6-0007-phy-usb-Add-support-for-new-Synopsys-USB-controller-.patch
+++ /dev/null
@@ -1,358 +0,0 @@
-From 4e5b9c9a73b32d28759225a40d30848393a8f1fd Mon Sep 17 00:00:00 2001
-From: Al Cooper <alcooperx@gmail.com>
-Date: Fri, 3 Jan 2020 13:18:05 -0500
-Subject: [PATCH] phy: usb: Add support for new Synopsys USB controller on the
- 7216
-
-The 7216 has the new USB XHCI controller from Synopsys. While
-this new controller and the PHY are similar to the STB versions,
-the major differences are:
-
-- Many of the registers and fields in the CTRL block have been
-  removed or changed.
-- A new set of Synopsys control registers, BCHP_USB_XHCI_GBL, were
-  added.
-- MDIO functionality has been replaced with direct access registers
-  in the BCHP_USB_XHCI_GBL block.
-- Power up PHY defaults that had to be changed by MDIO in previous
-  chips will now power up with the correct defaults.
-
-A new init module was created for this new Synopsys USB controller.
-A new compatible string was added and the driver will dispatch
-into one of two init modules based on it. A "reg-names" field was
-added so the driver can more easily get optional registers.
-A DT bindings document was also added for this driver.
-
-Signed-off-by: Al Cooper <alcooperx@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/broadcom/Makefile                 |   2 +-
- .../phy/broadcom/phy-brcm-usb-init-synopsys.c | 171 ++++++++++++++++++
- drivers/phy/broadcom/phy-brcm-usb-init.h      |   2 +
- drivers/phy/broadcom/phy-brcm-usb.c           |  70 +++++--
- 4 files changed, 227 insertions(+), 18 deletions(-)
- create mode 100644 drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
-
---- a/drivers/phy/broadcom/Makefile
-+++ b/drivers/phy/broadcom/Makefile
-@@ -8,7 +8,7 @@ obj-$(CONFIG_PHY_NS2_USB_DRD)		+= phy-bc
- obj-$(CONFIG_PHY_BRCM_SATA)		+= phy-brcm-sata.o
- obj-$(CONFIG_PHY_BRCM_USB)		+= phy-brcm-usb-dvr.o
- 
--phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o
-+phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o phy-brcm-usb-init-synopsys.o
- 
- obj-$(CONFIG_PHY_BCM_SR_PCIE)		+= phy-bcm-sr-pcie.o
- obj-$(CONFIG_PHY_BCM_SR_USB)		+= phy-bcm-sr-usb.o
---- /dev/null
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
-@@ -0,0 +1,171 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/* Copyright (c) 2018, Broadcom */
-+
-+/*
-+ * This module contains USB PHY initialization for power up and S3 resume
-+ * for newer Synopsys based USB hardware first used on the bcm7216.
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+
-+#include <linux/soc/brcmstb/brcmstb.h>
-+#include "phy-brcm-usb-init.h"
-+
-+/* Register definitions for the USB CTRL block */
-+#define USB_CTRL_SETUP			0x00
-+#define   USB_CTRL_SETUP_STRAP_IPP_SEL_MASK		0x02000000
-+#define   USB_CTRL_SETUP_SCB2_EN_MASK			0x00008000
-+#define   USB_CTRL_SETUP_SCB1_EN_MASK			0x00004000
-+#define   USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK		0x00000200
-+#define   USB_CTRL_SETUP_IPP_MASK			0x00000020
-+#define   USB_CTRL_SETUP_IOC_MASK			0x00000010
-+#define USB_CTRL_USB_PM			0x04
-+#define   USB_CTRL_USB_PM_USB_PWRDN_MASK		0x80000000
-+#define   USB_CTRL_USB_PM_SOFT_RESET_MASK		0x40000000
-+#define   USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK		0x00800000
-+#define   USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK		0x00400000
-+#define USB_CTRL_USB_PM_STATUS		0x08
-+#define USB_CTRL_USB_DEVICE_CTL1	0x10
-+#define   USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK	0x00000003
-+
-+
-+static void xhci_soft_reset(struct brcm_usb_init_params *params,
-+			int on_off)
-+{
-+	void __iomem *ctrl = params->ctrl_regs;
-+
-+	/* Assert reset */
-+	if (on_off)
-+		USB_CTRL_UNSET(ctrl, USB_PM, XHC_SOFT_RESETB);
-+	/* De-assert reset */
-+	else
-+		USB_CTRL_SET(ctrl, USB_PM, XHC_SOFT_RESETB);
-+}
-+
-+static void usb_init_ipp(struct brcm_usb_init_params *params)
-+{
-+	void __iomem *ctrl = params->ctrl_regs;
-+	u32 reg;
-+	u32 orig_reg;
-+
-+	pr_debug("%s\n", __func__);
-+
-+	orig_reg = reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
-+	if (params->ipp != 2)
-+		/* override ipp strap pin (if it exits) */
-+		reg &= ~(USB_CTRL_MASK(SETUP, STRAP_IPP_SEL));
-+
-+	/* Override the default OC and PP polarity */
-+	reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC));
-+	if (params->ioc)
-+		reg |= USB_CTRL_MASK(SETUP, IOC);
-+	if (params->ipp == 1)
-+		reg |= USB_CTRL_MASK(SETUP, IPP);
-+	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
-+
-+	/*
-+	 * If we're changing IPP, make sure power is off long enough
-+	 * to turn off any connected devices.
-+	 */
-+	if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP))
-+		msleep(50);
-+}
-+
-+static void usb_init_common(struct brcm_usb_init_params *params)
-+{
-+	u32 reg;
-+	void __iomem *ctrl = params->ctrl_regs;
-+
-+	pr_debug("%s\n", __func__);
-+
-+	USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN);
-+	/* 1 millisecond - for USB clocks to settle down */
-+	usleep_range(1000, 2000);
-+
-+	if (USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE)) {
-+		reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
-+		reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
-+		reg |= params->mode;
-+		brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
-+	}
-+	switch (params->mode) {
-+	case USB_CTLR_MODE_HOST:
-+		USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB);
-+		break;
-+	default:
-+		USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB);
-+		USB_CTRL_SET(ctrl, USB_PM, BDC_SOFT_RESETB);
-+		break;
-+	}
-+}
-+
-+static void usb_init_xhci(struct brcm_usb_init_params *params)
-+{
-+	pr_debug("%s\n", __func__);
-+
-+	xhci_soft_reset(params, 0);
-+}
-+
-+static void usb_uninit_common(struct brcm_usb_init_params *params)
-+{
-+	void __iomem *ctrl = params->ctrl_regs;
-+
-+	pr_debug("%s\n", __func__);
-+
-+	USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
-+
-+}
-+
-+static void usb_uninit_xhci(struct brcm_usb_init_params *params)
-+{
-+
-+	pr_debug("%s\n", __func__);
-+
-+	xhci_soft_reset(params, 1);
-+}
-+
-+static int usb_get_dual_select(struct brcm_usb_init_params *params)
-+{
-+	void __iomem *ctrl = params->ctrl_regs;
-+	u32 reg = 0;
-+
-+	pr_debug("%s\n", __func__);
-+
-+	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
-+	reg &= USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
-+	return reg;
-+}
-+
-+static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
-+{
-+	void __iomem *ctrl = params->ctrl_regs;
-+	u32 reg;
-+
-+	pr_debug("%s\n", __func__);
-+
-+	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
-+	reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
-+	reg |= mode;
-+	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
-+}
-+
-+
-+static const struct brcm_usb_init_ops bcm7216_ops = {
-+	.init_ipp = usb_init_ipp,
-+	.init_common = usb_init_common,
-+	.init_xhci = usb_init_xhci,
-+	.uninit_common = usb_uninit_common,
-+	.uninit_xhci = usb_uninit_xhci,
-+	.get_dual_select = usb_get_dual_select,
-+	.set_dual_select = usb_set_dual_select,
-+};
-+
-+void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params)
-+{
-+
-+	pr_debug("%s\n", __func__);
-+
-+	params->family_name = "7216";
-+	params->ops = &bcm7216_ops;
-+}
---- a/drivers/phy/broadcom/phy-brcm-usb-init.h
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
-@@ -43,6 +43,7 @@ struct brcm_usb_init_ops {
- struct  brcm_usb_init_params {
- 	void __iomem *ctrl_regs;
- 	void __iomem *xhci_ec_regs;
-+	void __iomem *xhci_gbl_regs;
- 	int ioc;
- 	int ipp;
- 	int mode;
-@@ -55,6 +56,7 @@ struct  brcm_usb_init_params {
- };
- 
- void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params);
-+void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params);
- 
- static inline u32 brcm_usb_readl(void __iomem *addr)
- {
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -241,6 +241,15 @@ static const struct attribute_group brcm
- 	.attrs = brcm_usb_phy_attrs,
- };
- 
-+static const struct of_device_id brcm_usb_dt_ids[] = {
-+	{
-+		.compatible = "brcm,bcm7216-usb-phy",
-+		.data = &brcm_usb_dvr_init_7216,
-+	},
-+	{ .compatible = "brcm,brcmstb-usb-phy" },
-+	{ /* sentinel */ }
-+};
-+
- static int brcm_usb_phy_dvr_init(struct platform_device *pdev,
- 				 struct brcm_usb_phy_data *priv,
- 				 struct device_node *dn)
-@@ -316,13 +325,16 @@ static int brcm_usb_phy_dvr_init(struct
- 
- static int brcm_usb_phy_probe(struct platform_device *pdev)
- {
--	struct resource *res;
-+	struct resource *res_ctrl;
-+	struct resource *res_xhciec = NULL;
-+	struct resource *res_xhcigbl = NULL;
- 	struct device *dev = &pdev->dev;
- 	struct brcm_usb_phy_data *priv;
- 	struct phy_provider *phy_provider;
- 	struct device_node *dn = pdev->dev.of_node;
- 	int err;
- 	const char *mode;
-+	const struct of_device_id *match;
- 
- 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- 	if (!priv)
-@@ -331,30 +343,59 @@ static int brcm_usb_phy_probe(struct pla
- 
- 	priv->ini.family_id = brcmstb_get_family_id();
- 	priv->ini.product_id = brcmstb_get_product_id();
--	brcm_usb_dvr_init_7445(&priv->ini);
-+
-+	match = of_match_node(brcm_usb_dt_ids, dev->of_node);
-+	if (match && match->data) {
-+		void (*dvr_init)(struct brcm_usb_init_params *params);
-+
-+		dvr_init = match->data;
-+		(*dvr_init)(&priv->ini);
-+	} else {
-+		brcm_usb_dvr_init_7445(&priv->ini);
-+	}
-+
- 	dev_dbg(dev, "Best mapping table is for %s\n",
- 		priv->ini.family_name);
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	if (!res) {
--		dev_err(dev, "can't get USB_CTRL base address\n");
--		return -EINVAL;
-+
-+	/* Newer DT node has reg-names. xhci_ec and xhci_gbl are optional. */
-+	res_ctrl = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
-+	if (res_ctrl != NULL) {
-+		res_xhciec = platform_get_resource_byname(pdev,
-+							  IORESOURCE_MEM,
-+							  "xhci_ec");
-+		res_xhcigbl = platform_get_resource_byname(pdev,
-+							   IORESOURCE_MEM,
-+							   "xhci_gbl");
-+	} else {
-+		/* Older DT node without reg-names, use index */
-+		res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+		if (res_ctrl == NULL) {
-+			dev_err(dev, "can't get CTRL base address\n");
-+			return -EINVAL;
-+		}
-+		res_xhciec = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- 	}
--	priv->ini.ctrl_regs = devm_ioremap_resource(dev, res);
-+	priv->ini.ctrl_regs = devm_ioremap_resource(dev, res_ctrl);
- 	if (IS_ERR(priv->ini.ctrl_regs)) {
- 		dev_err(dev, "can't map CTRL register space\n");
- 		return -EINVAL;
- 	}
--
--	/* The XHCI EC registers are optional */
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
--	if (res) {
-+	if (res_xhciec) {
- 		priv->ini.xhci_ec_regs =
--			devm_ioremap_resource(dev, res);
-+			devm_ioremap_resource(dev, res_xhciec);
- 		if (IS_ERR(priv->ini.xhci_ec_regs)) {
- 			dev_err(dev, "can't map XHCI EC register space\n");
- 			return -EINVAL;
- 		}
- 	}
-+	if (res_xhcigbl) {
-+		priv->ini.xhci_gbl_regs =
-+			devm_ioremap_resource(dev, res_xhcigbl);
-+		if (IS_ERR(priv->ini.xhci_gbl_regs)) {
-+			dev_err(dev, "can't map XHCI Global register space\n");
-+			return -EINVAL;
-+		}
-+	}
- 
- 	of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp);
- 	of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc);
-@@ -480,11 +521,6 @@ static const struct dev_pm_ops brcm_usb_
- 	SET_LATE_SYSTEM_SLEEP_PM_OPS(brcm_usb_phy_suspend, brcm_usb_phy_resume)
- };
- 
--static const struct of_device_id brcm_usb_dt_ids[] = {
--	{ .compatible = "brcm,brcmstb-usb-phy" },
--	{ /* sentinel */ }
--};
--
- MODULE_DEVICE_TABLE(of, brcm_usb_dt_ids);
- 
- static struct platform_driver brcm_usb_driver = {
diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0008-phy-usb-Add-support-for-new-Synopsys-USB-controller-.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0008-phy-usb-Add-support-for-new-Synopsys-USB-controller-.patch
deleted file mode 100644
index 008108c589..0000000000
--- a/target/linux/bcm4908/patches-5.4/084-v5.6-0008-phy-usb-Add-support-for-new-Synopsys-USB-controller-.patch
+++ /dev/null
@@ -1,680 +0,0 @@
-From 9d5f51dcdb646c2ed21649d379fbb703994f1ec9 Mon Sep 17 00:00:00 2001
-From: Al Cooper <alcooperx@gmail.com>
-Date: Fri, 3 Jan 2020 13:18:06 -0500
-Subject: [PATCH] phy: usb: Add support for new Synopsys USB controller on the
- 7211b0
-
-The 7211b0 has added the STB XHCI Synopsys controller and it
-will be used instead of the RPi based DWC USB controller. The new
-Synopsys XHCI controller core is the same one that is used on the
-7216, but because of the way the STB USB PHY is used on both the A0
-and B0, some of the PHY control is different.
-
-Signed-off-by: Al Cooper <alcooperx@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- .../phy/broadcom/phy-brcm-usb-init-synopsys.c | 163 +++++++++++++++++-
- drivers/phy/broadcom/phy-brcm-usb-init.c      |  31 ++--
- drivers/phy/broadcom/phy-brcm-usb-init.h      |  17 +-
- drivers/phy/broadcom/phy-brcm-usb.c           | 162 +++++++++++------
- 4 files changed, 295 insertions(+), 78 deletions(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
-@@ -12,10 +12,33 @@
- #include <linux/soc/brcmstb/brcmstb.h>
- #include "phy-brcm-usb-init.h"
- 
-+#define PHY_LOCK_TIMEOUT_MS 200
-+
-+/* Register definitions for syscon piarbctl registers */
-+#define PIARBCTL_CAM			0x00
-+#define PIARBCTL_SPLITTER		0x04
-+#define PIARBCTL_MISC			0x08
-+#define   PIARBCTL_MISC_SECURE_MASK			0x80000000
-+#define   PIARBCTL_MISC_USB_SELECT_MASK			0x40000000
-+#define   PIARBCTL_MISC_USB_4G_SDRAM_MASK		0x20000000
-+#define   PIARBCTL_MISC_USB_PRIORITY_MASK		0x000f0000
-+#define   PIARBCTL_MISC_USB_MEM_PAGE_MASK		0x0000f000
-+#define   PIARBCTL_MISC_CAM1_MEM_PAGE_MASK		0x00000f00
-+#define   PIARBCTL_MISC_CAM0_MEM_PAGE_MASK		0x000000f0
-+#define   PIARBCTL_MISC_SATA_PRIORITY_MASK		0x0000000f
-+#define PIARBCTL_USB_M_ASB_CTRL		0x10
-+
-+#define PIARBCTL_MISC_USB_ONLY_MASK		\
-+	(PIARBCTL_MISC_USB_SELECT_MASK |	\
-+	 PIARBCTL_MISC_USB_4G_SDRAM_MASK |	\
-+	 PIARBCTL_MISC_USB_PRIORITY_MASK |	\
-+	 PIARBCTL_MISC_USB_MEM_PAGE_MASK)
-+
- /* Register definitions for the USB CTRL block */
- #define USB_CTRL_SETUP			0x00
- #define   USB_CTRL_SETUP_STRAP_IPP_SEL_MASK		0x02000000
- #define   USB_CTRL_SETUP_SCB2_EN_MASK			0x00008000
-+#define   USB_CTRL_SETUP_tca_drv_sel_MASK		0x01000000
- #define   USB_CTRL_SETUP_SCB1_EN_MASK			0x00004000
- #define   USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK		0x00000200
- #define   USB_CTRL_SETUP_IPP_MASK			0x00000020
-@@ -29,11 +52,73 @@
- #define USB_CTRL_USB_DEVICE_CTL1	0x10
- #define   USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK	0x00000003
- 
-+/* Register definitions for the USB_PHY block in 7211b0 */
-+#define USB_PHY_PLL_LDO_CTL		0x08
-+#define   USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK		0x00000004
-+#define USB_PHY_UTMI_CTL_1		0x04
-+#define   USB_PHY_UTMI_CTL_1_PHY_MODE_MASK		0x0000000c
-+#define   USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT		2
-+#define USB_PHY_STATUS			0x20
-+#define   USB_PHY_STATUS_pll_lock_MASK			0x00000001
-+
-+/* Register definitions for the MDIO registers in the DWC2 block of
-+ * the 7211b0.
-+ * NOTE: The PHY's MDIO registers are only accessible through the
-+ * legacy DesignWare USB controller even though it's not being used.
-+ */
-+#define USB_GMDIOCSR	0
-+#define USB_GMDIOGEN	4
-+
-+
-+static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params,
-+				  uint8_t addr, uint16_t data)
-+{
-+	void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO];
-+
-+	addr &= 0x1f; /* 5-bit address */
-+	brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN);
-+	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
-+		;
-+	brcm_usb_writel(0x59020000 | (addr << 18) | data,
-+			usb_mdio + USB_GMDIOGEN);
-+	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
-+		;
-+	brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN);
-+	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
-+		;
-+}
-+
-+static uint16_t __maybe_unused usb_mdio_read_7211b0(
-+	struct brcm_usb_init_params *params, uint8_t addr)
-+{
-+	void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO];
-+
-+	addr &= 0x1f; /* 5-bit address */
-+	brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN);
-+	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
-+		;
-+	brcm_usb_writel(0x69020000 | (addr << 18), usb_mdio + USB_GMDIOGEN);
-+	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
-+		;
-+	brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN);
-+	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
-+		;
-+	return brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & 0xffff;
-+}
-+
-+static void usb2_eye_fix_7211b0(struct brcm_usb_init_params *params)
-+{
-+	/* select bank */
-+	usb_mdio_write_7211b0(params, 0x1f, 0x80a0);
-+
-+	/* Set the eye */
-+	usb_mdio_write_7211b0(params, 0x0a, 0xc6a0);
-+}
- 
- static void xhci_soft_reset(struct brcm_usb_init_params *params,
- 			int on_off)
- {
--	void __iomem *ctrl = params->ctrl_regs;
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
- 
- 	/* Assert reset */
- 	if (on_off)
-@@ -45,7 +130,7 @@ static void xhci_soft_reset(struct brcm_
- 
- static void usb_init_ipp(struct brcm_usb_init_params *params)
- {
--	void __iomem *ctrl = params->ctrl_regs;
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
- 	u32 reg;
- 	u32 orig_reg;
- 
-@@ -72,10 +157,18 @@ static void usb_init_ipp(struct brcm_usb
- 		msleep(50);
- }
- 
-+static void syscon_piarbctl_init(struct regmap *rmap)
-+{
-+	/* Switch from legacy USB OTG controller to new STB USB controller */
-+	regmap_update_bits(rmap, PIARBCTL_MISC, PIARBCTL_MISC_USB_ONLY_MASK,
-+			   PIARBCTL_MISC_USB_SELECT_MASK |
-+			   PIARBCTL_MISC_USB_4G_SDRAM_MASK);
-+}
-+
- static void usb_init_common(struct brcm_usb_init_params *params)
- {
- 	u32 reg;
--	void __iomem *ctrl = params->ctrl_regs;
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
- 
- 	pr_debug("%s\n", __func__);
- 
-@@ -100,6 +193,45 @@ static void usb_init_common(struct brcm_
- 	}
- }
- 
-+static void usb_init_common_7211b0(struct brcm_usb_init_params *params)
-+{
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
-+	void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY];
-+	int timeout_ms = PHY_LOCK_TIMEOUT_MS;
-+	u32 reg;
-+
-+	if (params->syscon_piarbctl)
-+		syscon_piarbctl_init(params->syscon_piarbctl);
-+
-+	/* Init the PHY */
-+	reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_LDO_CTL);
-+	reg |= USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK;
-+	brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL);
-+
-+	/* wait for lock */
-+	while (timeout_ms-- > 0) {
-+		reg = brcm_usb_readl(usb_phy + USB_PHY_STATUS);
-+		if (reg & USB_PHY_STATUS_pll_lock_MASK)
-+			break;
-+		usleep_range(1000, 2000);
-+	}
-+
-+	/* Set the PHY_MODE */
-+	reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
-+	reg &= ~USB_PHY_UTMI_CTL_1_PHY_MODE_MASK;
-+	reg |= params->mode << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT;
-+	brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
-+
-+	/* Fix the incorrect default */
-+	reg = brcm_usb_readl(ctrl + USB_CTRL_SETUP);
-+	reg &= ~USB_CTRL_SETUP_tca_drv_sel_MASK;
-+	brcm_usb_writel(reg, ctrl + USB_CTRL_SETUP);
-+
-+	usb_init_common(params);
-+
-+	usb2_eye_fix_7211b0(params);
-+}
-+
- static void usb_init_xhci(struct brcm_usb_init_params *params)
- {
- 	pr_debug("%s\n", __func__);
-@@ -109,7 +241,7 @@ static void usb_init_xhci(struct brcm_us
- 
- static void usb_uninit_common(struct brcm_usb_init_params *params)
- {
--	void __iomem *ctrl = params->ctrl_regs;
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
- 
- 	pr_debug("%s\n", __func__);
- 
-@@ -127,7 +259,7 @@ static void usb_uninit_xhci(struct brcm_
- 
- static int usb_get_dual_select(struct brcm_usb_init_params *params)
- {
--	void __iomem *ctrl = params->ctrl_regs;
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
- 	u32 reg = 0;
- 
- 	pr_debug("%s\n", __func__);
-@@ -139,7 +271,7 @@ static int usb_get_dual_select(struct br
- 
- static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
- {
--	void __iomem *ctrl = params->ctrl_regs;
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
- 	u32 reg;
- 
- 	pr_debug("%s\n", __func__);
-@@ -161,6 +293,16 @@ static const struct brcm_usb_init_ops bc
- 	.set_dual_select = usb_set_dual_select,
- };
- 
-+static const struct brcm_usb_init_ops bcm7211b0_ops = {
-+	.init_ipp = usb_init_ipp,
-+	.init_common = usb_init_common_7211b0,
-+	.init_xhci = usb_init_xhci,
-+	.uninit_common = usb_uninit_common,
-+	.uninit_xhci = usb_uninit_xhci,
-+	.get_dual_select = usb_get_dual_select,
-+	.set_dual_select = usb_set_dual_select,
-+};
-+
- void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params)
- {
- 
-@@ -169,3 +311,12 @@ void brcm_usb_dvr_init_7216(struct brcm_
- 	params->family_name = "7216";
- 	params->ops = &bcm7216_ops;
- }
-+
-+void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params)
-+{
-+
-+	pr_debug("%s\n", __func__);
-+
-+	params->family_name = "7211";
-+	params->ops = &bcm7211b0_ops;
-+}
---- a/drivers/phy/broadcom/phy-brcm-usb-init.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
-@@ -401,7 +401,7 @@ void usb_ctrl_unset_family(struct brcm_u
- 	u32 mask;
- 
- 	mask = params->usb_reg_bits_map[field];
--	brcm_usb_ctrl_unset(params->ctrl_regs + reg_offset, mask);
-+	brcm_usb_ctrl_unset(params->regs[BRCM_REGS_CTRL] + reg_offset, mask);
- };
- 
- static inline
-@@ -411,7 +411,7 @@ void usb_ctrl_set_family(struct brcm_usb
- 	u32 mask;
- 
- 	mask = params->usb_reg_bits_map[field];
--	brcm_usb_ctrl_set(params->ctrl_regs + reg_offset, mask);
-+	brcm_usb_ctrl_set(params->regs[BRCM_REGS_CTRL] + reg_offset, mask);
- };
- 
- static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode)
-@@ -544,7 +544,7 @@ static void brcmusb_usb3_pll_54mhz(struc
- {
- 	u32 ofs;
- 	int ii;
--	void __iomem *ctrl_base = params->ctrl_regs;
-+	void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL];
- 
- 	/*
- 	 * On newer B53 based SoC's, the reference clock for the
-@@ -625,7 +625,7 @@ static void brcmusb_usb3_ssc_enable(void
- 
- static void brcmusb_usb3_phy_workarounds(struct brcm_usb_init_params *params)
- {
--	void __iomem *ctrl_base = params->ctrl_regs;
-+	void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL];
- 
- 	brcmusb_usb3_pll_fix(ctrl_base);
- 	brcmusb_usb3_pll_54mhz(params);
-@@ -667,7 +667,7 @@ static void brcmusb_memc_fix(struct brcm
- 
- static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params)
- {
--	void __iomem *xhci_ec_base = params->xhci_ec_regs;
-+	void __iomem *xhci_ec_base = params->regs[BRCM_REGS_XHCI_EC];
- 	u32 val;
- 
- 	if (params->family_id != 0x74371000 || !xhci_ec_base)
-@@ -680,8 +680,8 @@ static void brcmusb_usb3_otp_fix(struct
- 	brcm_usb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
- 
- 	/* Reset USB 3.0 PHY for workaround to take effect */
--	USB_CTRL_UNSET(params->ctrl_regs, USB30_CTL1, PHY3_RESETB);
--	USB_CTRL_SET(params->ctrl_regs,	USB30_CTL1, PHY3_RESETB);
-+	USB_CTRL_UNSET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB);
-+	USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB);
- }
- 
- static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params,
-@@ -740,7 +740,7 @@ static enum brcm_family_type get_family_
- 
- static void usb_init_ipp(struct brcm_usb_init_params *params)
- {
--	void __iomem *ctrl = params->ctrl_regs;
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
- 	u32 reg;
- 	u32 orig_reg;
- 
-@@ -786,7 +786,7 @@ static void usb_init_ipp(struct brcm_usb
- static void usb_init_common(struct brcm_usb_init_params *params)
- {
- 	u32 reg;
--	void __iomem *ctrl = params->ctrl_regs;
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
- 
- 	/* Clear any pending wake conditions */
- 	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS));
-@@ -866,7 +866,7 @@ static void usb_init_common(struct brcm_
- static void usb_init_eohci(struct brcm_usb_init_params *params)
- {
- 	u32 reg;
--	void __iomem *ctrl = params->ctrl_regs;
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
- 
- 	if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB))
- 		USB_CTRL_SET_FAMILY(params, USB_PM, USB20_HC_RESETB);
-@@ -902,7 +902,7 @@ static void usb_init_eohci(struct brcm_u
- 
- static void usb_init_xhci(struct brcm_usb_init_params *params)
- {
--	void __iomem *ctrl = params->ctrl_regs;
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
- 
- 	USB_CTRL_UNSET(ctrl, USB30_PCTL, PHY3_IDDQ_OVERRIDE);
- 	/* 1 millisecond - for USB clocks to settle down */
-@@ -944,12 +944,13 @@ static void usb_uninit_eohci(struct brcm
- static void usb_uninit_xhci(struct brcm_usb_init_params *params)
- {
- 	brcmusb_xhci_soft_reset(params, 1);
--	USB_CTRL_SET(params->ctrl_regs, USB30_PCTL, PHY3_IDDQ_OVERRIDE);
-+	USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_PCTL,
-+		     PHY3_IDDQ_OVERRIDE);
- }
- 
- static int usb_get_dual_select(struct brcm_usb_init_params *params)
- {
--	void __iomem *ctrl = params->ctrl_regs;
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
- 	u32 reg = 0;
- 
- 	pr_debug("%s\n", __func__);
-@@ -963,7 +964,7 @@ static int usb_get_dual_select(struct br
- 
- static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
- {
--	void __iomem *ctrl = params->ctrl_regs;
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
- 	u32 reg;
- 
- 	pr_debug("%s\n", __func__);
-@@ -980,7 +981,7 @@ static void usb_set_dual_select(struct b
- static void usb_wake_enable(struct brcm_usb_init_params *params,
- 			  int enable)
- {
--	void __iomem *ctrl = params->ctrl_regs;
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
- 
- 	if (enable)
- 		USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN);
---- a/drivers/phy/broadcom/phy-brcm-usb-init.h
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
-@@ -6,12 +6,21 @@
- #ifndef _USB_BRCM_COMMON_INIT_H
- #define _USB_BRCM_COMMON_INIT_H
- 
-+#include <linux/regmap.h>
-+
- #define USB_CTLR_MODE_HOST 0
- #define USB_CTLR_MODE_DEVICE 1
- #define USB_CTLR_MODE_DRD 2
- #define USB_CTLR_MODE_TYPEC_PD 3
- 
--struct  brcm_usb_init_params;
-+enum brcmusb_reg_sel {
-+	BRCM_REGS_CTRL = 0,
-+	BRCM_REGS_XHCI_EC,
-+	BRCM_REGS_XHCI_GBL,
-+	BRCM_REGS_USB_PHY,
-+	BRCM_REGS_USB_MDIO,
-+	BRCM_REGS_MAX
-+};
- 
- #define USB_CTRL_REG(base, reg)	((void __iomem *)base + USB_CTRL_##reg)
- #define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg)
-@@ -41,9 +50,7 @@ struct brcm_usb_init_ops {
- };
- 
- struct  brcm_usb_init_params {
--	void __iomem *ctrl_regs;
--	void __iomem *xhci_ec_regs;
--	void __iomem *xhci_gbl_regs;
-+	void __iomem *regs[BRCM_REGS_MAX];
- 	int ioc;
- 	int ipp;
- 	int mode;
-@@ -53,10 +60,12 @@ struct  brcm_usb_init_params {
- 	const char *family_name;
- 	const u32 *usb_reg_bits_map;
- 	const struct brcm_usb_init_ops *ops;
-+	struct regmap *syscon_piarbctl;
- };
- 
- void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params);
- void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params);
-+void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params);
- 
- static inline u32 brcm_usb_readl(void __iomem *addr)
- {
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -16,6 +16,7 @@
- #include <linux/interrupt.h>
- #include <linux/soc/brcmstb/brcmstb.h>
- #include <dt-bindings/phy/phy.h>
-+#include <linux/mfd/syscon.h>
- 
- #include "phy-brcm-usb-init.h"
- 
-@@ -32,6 +33,11 @@ struct value_to_name_map {
- 	const char *name;
- };
- 
-+struct match_chip_info {
-+	void *init_func;
-+	u8 required_regs[BRCM_REGS_MAX + 1];
-+};
-+
- static struct value_to_name_map brcm_dr_mode_to_name[] = {
- 	{ USB_CTLR_MODE_HOST, "host" },
- 	{ USB_CTLR_MODE_DEVICE, "peripheral" },
-@@ -64,6 +70,10 @@ struct brcm_usb_phy_data {
- 	struct brcm_usb_phy	phys[BRCM_USB_PHY_ID_MAX];
- };
- 
-+static s8 *node_reg_names[BRCM_REGS_MAX] = {
-+	"crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio"
-+};
-+
- static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id)
- {
- 	struct phy *gphy = dev_id;
-@@ -241,15 +251,86 @@ static const struct attribute_group brcm
- 	.attrs = brcm_usb_phy_attrs,
- };
- 
-+static struct match_chip_info chip_info_7216 = {
-+	.init_func = &brcm_usb_dvr_init_7216,
-+	.required_regs = {
-+		BRCM_REGS_CTRL,
-+		BRCM_REGS_XHCI_EC,
-+		BRCM_REGS_XHCI_GBL,
-+		-1,
-+	},
-+};
-+
-+static struct match_chip_info chip_info_7211b0 = {
-+	.init_func = &brcm_usb_dvr_init_7211b0,
-+	.required_regs = {
-+		BRCM_REGS_CTRL,
-+		BRCM_REGS_XHCI_EC,
-+		BRCM_REGS_XHCI_GBL,
-+		BRCM_REGS_USB_PHY,
-+		BRCM_REGS_USB_MDIO,
-+		-1,
-+	},
-+};
-+
-+static struct match_chip_info chip_info_7445 = {
-+	.init_func = &brcm_usb_dvr_init_7445,
-+	.required_regs = {
-+		BRCM_REGS_CTRL,
-+		BRCM_REGS_XHCI_EC,
-+		-1,
-+	},
-+};
-+
- static const struct of_device_id brcm_usb_dt_ids[] = {
- 	{
- 		.compatible = "brcm,bcm7216-usb-phy",
--		.data = &brcm_usb_dvr_init_7216,
-+		.data = &chip_info_7216,
-+	},
-+	{
-+		.compatible = "brcm,bcm7211-usb-phy",
-+		.data = &chip_info_7211b0,
-+	},
-+	{
-+		.compatible = "brcm,brcmstb-usb-phy",
-+		.data = &chip_info_7445,
- 	},
--	{ .compatible = "brcm,brcmstb-usb-phy" },
- 	{ /* sentinel */ }
- };
- 
-+static int brcm_usb_get_regs(struct platform_device *pdev,
-+			     enum brcmusb_reg_sel regs,
-+			     struct  brcm_usb_init_params *ini)
-+{
-+	struct resource *res;
-+
-+	/* Older DT nodes have ctrl and optional xhci_ec by index only */
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+						node_reg_names[regs]);
-+	if (res == NULL) {
-+		if (regs == BRCM_REGS_CTRL) {
-+			res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+		} else if (regs == BRCM_REGS_XHCI_EC) {
-+			res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+			/* XHCI_EC registers are optional */
-+			if (res == NULL)
-+				return 0;
-+		}
-+		if (res == NULL) {
-+			dev_err(&pdev->dev, "can't get %s base address\n",
-+				node_reg_names[regs]);
-+			return 1;
-+		}
-+	}
-+	ini->regs[regs] = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(ini->regs[regs])) {
-+		dev_err(&pdev->dev, "can't map %s register space\n",
-+			node_reg_names[regs]);
-+		return 1;
-+	}
-+	return 0;
-+}
-+
- static int brcm_usb_phy_dvr_init(struct platform_device *pdev,
- 				 struct brcm_usb_phy_data *priv,
- 				 struct device_node *dn)
-@@ -325,9 +406,6 @@ static int brcm_usb_phy_dvr_init(struct
- 
- static int brcm_usb_phy_probe(struct platform_device *pdev)
- {
--	struct resource *res_ctrl;
--	struct resource *res_xhciec = NULL;
--	struct resource *res_xhcigbl = NULL;
- 	struct device *dev = &pdev->dev;
- 	struct brcm_usb_phy_data *priv;
- 	struct phy_provider *phy_provider;
-@@ -335,6 +413,10 @@ static int brcm_usb_phy_probe(struct pla
- 	int err;
- 	const char *mode;
- 	const struct of_device_id *match;
-+	void (*dvr_init)(struct brcm_usb_init_params *params);
-+	const struct match_chip_info *info;
-+	struct regmap *rmap;
-+	int x;
- 
- 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- 	if (!priv)
-@@ -345,58 +427,13 @@ static int brcm_usb_phy_probe(struct pla
- 	priv->ini.product_id = brcmstb_get_product_id();
- 
- 	match = of_match_node(brcm_usb_dt_ids, dev->of_node);
--	if (match && match->data) {
--		void (*dvr_init)(struct brcm_usb_init_params *params);
--
--		dvr_init = match->data;
--		(*dvr_init)(&priv->ini);
--	} else {
--		brcm_usb_dvr_init_7445(&priv->ini);
--	}
-+	info = match->data;
-+	dvr_init = info->init_func;
-+	(*dvr_init)(&priv->ini);
- 
- 	dev_dbg(dev, "Best mapping table is for %s\n",
- 		priv->ini.family_name);
- 
--	/* Newer DT node has reg-names. xhci_ec and xhci_gbl are optional. */
--	res_ctrl = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
--	if (res_ctrl != NULL) {
--		res_xhciec = platform_get_resource_byname(pdev,
--							  IORESOURCE_MEM,
--							  "xhci_ec");
--		res_xhcigbl = platform_get_resource_byname(pdev,
--							   IORESOURCE_MEM,
--							   "xhci_gbl");
--	} else {
--		/* Older DT node without reg-names, use index */
--		res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--		if (res_ctrl == NULL) {
--			dev_err(dev, "can't get CTRL base address\n");
--			return -EINVAL;
--		}
--		res_xhciec = platform_get_resource(pdev, IORESOURCE_MEM, 1);
--	}
--	priv->ini.ctrl_regs = devm_ioremap_resource(dev, res_ctrl);
--	if (IS_ERR(priv->ini.ctrl_regs)) {
--		dev_err(dev, "can't map CTRL register space\n");
--		return -EINVAL;
--	}
--	if (res_xhciec) {
--		priv->ini.xhci_ec_regs =
--			devm_ioremap_resource(dev, res_xhciec);
--		if (IS_ERR(priv->ini.xhci_ec_regs)) {
--			dev_err(dev, "can't map XHCI EC register space\n");
--			return -EINVAL;
--		}
--	}
--	if (res_xhcigbl) {
--		priv->ini.xhci_gbl_regs =
--			devm_ioremap_resource(dev, res_xhcigbl);
--		if (IS_ERR(priv->ini.xhci_gbl_regs)) {
--			dev_err(dev, "can't map XHCI Global register space\n");
--			return -EINVAL;
--		}
--	}
--
- 	of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp);
- 	of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc);
- 
-@@ -412,6 +449,16 @@ static int brcm_usb_phy_probe(struct pla
- 	if (of_property_read_bool(dn, "brcm,has-eohci"))
- 		priv->has_eohci = true;
- 
-+	for (x = 0; x < BRCM_REGS_MAX; x++) {
-+		if (info->required_regs[x] >= BRCM_REGS_MAX)
-+			break;
-+
-+		err = brcm_usb_get_regs(pdev, info->required_regs[x],
-+					&priv->ini);
-+		if (err)
-+			return -EINVAL;
-+	}
-+
- 	err = brcm_usb_phy_dvr_init(pdev, priv, dn);
- 	if (err)
- 		return err;
-@@ -431,6 +478,15 @@ static int brcm_usb_phy_probe(struct pla
- 	if (err)
- 		dev_warn(dev, "Error creating sysfs attributes\n");
- 
-+	/* Get piarbctl syscon if it exists */
-+	rmap = syscon_regmap_lookup_by_phandle(dev->of_node,
-+						 "syscon-piarbctl");
-+	if (IS_ERR(rmap))
-+		rmap = syscon_regmap_lookup_by_phandle(dev->of_node,
-+						       "brcm,syscon-piarbctl");
-+	if (!IS_ERR(rmap))
-+		priv->ini.syscon_piarbctl = rmap;
-+
- 	/* start with everything off */
- 	if (priv->has_xhci)
- 		brcm_usb_uninit_xhci(&priv->ini);
diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0009-phy-usb-fix-driver-to-defer-on-clk_get-defer.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0009-phy-usb-fix-driver-to-defer-on-clk_get-defer.patch
deleted file mode 100644
index a9e4b60ea6..0000000000
--- a/target/linux/bcm4908/patches-5.4/084-v5.6-0009-phy-usb-fix-driver-to-defer-on-clk_get-defer.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 89927fe0061aaa69b39e95ed793d2c61903b7895 Mon Sep 17 00:00:00 2001
-From: Al Cooper <alcooperx@gmail.com>
-Date: Fri, 3 Jan 2020 13:18:07 -0500
-Subject: [PATCH] phy: usb: fix driver to defer on clk_get defer
-
-Handle defer on clk_get because the new SCMI clock driver comes
-up after this driver.
-
-Signed-off-by: Al Cooper <alcooperx@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/broadcom/phy-brcm-usb.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -341,6 +341,8 @@ static int brcm_usb_phy_dvr_init(struct
- 
- 	priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb");
- 	if (IS_ERR(priv->usb_20_clk)) {
-+		if (PTR_ERR(priv->usb_20_clk) == -EPROBE_DEFER)
-+			return -EPROBE_DEFER;
- 		dev_info(dev, "Clock not found in Device Tree\n");
- 		priv->usb_20_clk = NULL;
- 	}
-@@ -371,6 +373,8 @@ static int brcm_usb_phy_dvr_init(struct
- 
- 		priv->usb_30_clk = of_clk_get_by_name(dn, "sw_usb3");
- 		if (IS_ERR(priv->usb_30_clk)) {
-+			if (PTR_ERR(priv->usb_30_clk) == -EPROBE_DEFER)
-+				return -EPROBE_DEFER;
- 			dev_info(dev,
- 				 "USB3.0 clock not found in Device Tree\n");
- 			priv->usb_30_clk = NULL;
-@@ -382,6 +386,8 @@ static int brcm_usb_phy_dvr_init(struct
- 
- 	priv->suspend_clk = clk_get(dev, "usb0_freerun");
- 	if (IS_ERR(priv->suspend_clk)) {
-+		if (PTR_ERR(priv->suspend_clk) == -EPROBE_DEFER)
-+			return -EPROBE_DEFER;
- 		dev_err(dev, "Suspend Clock not found in Device Tree\n");
- 		priv->suspend_clk = NULL;
- 	}
diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0010-phy-usb-PHY-s-MDIO-registers-not-accessible-without-.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0010-phy-usb-PHY-s-MDIO-registers-not-accessible-without-.patch
deleted file mode 100644
index 48f829f799..0000000000
--- a/target/linux/bcm4908/patches-5.4/084-v5.6-0010-phy-usb-PHY-s-MDIO-registers-not-accessible-without-.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From fc430aea02068150d053ef24bc424db3dd1357d4 Mon Sep 17 00:00:00 2001
-From: Al Cooper <alcooperx@gmail.com>
-Date: Fri, 3 Jan 2020 13:18:08 -0500
-Subject: [PATCH] phy: usb: PHY's MDIO registers not accessible without device
- installed
-
-When there is no device connected and FSM is enabled, the XHCI puts
-the PHY into suspend mode.  When the PHY is put into suspend mode
-the USB LDO powers down the PHY. This causes the MDIO to be
-inaccessible and its registers reset to default. The fix is to
-disable FSM.
-
-Signed-off-by: Al Cooper <alcooperx@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
-@@ -56,6 +56,7 @@
- #define USB_PHY_PLL_LDO_CTL		0x08
- #define   USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK		0x00000004
- #define USB_PHY_UTMI_CTL_1		0x04
-+#define   USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK	0x00000800
- #define   USB_PHY_UTMI_CTL_1_PHY_MODE_MASK		0x0000000c
- #define   USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT		2
- #define USB_PHY_STATUS			0x20
-@@ -229,6 +230,14 @@ static void usb_init_common_7211b0(struc
- 
- 	usb_init_common(params);
- 
-+	/*
-+	 * Disable FSM, otherwise the PHY will auto suspend when no
-+	 * device is connected and will be reset on resume.
-+	 */
-+	reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
-+	reg &= ~USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK;
-+	brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
-+
- 	usb2_eye_fix_7211b0(params);
- }
- 
diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0011-phy-usb-bdc-Fix-occasional-failure-with-BDC-on-7211.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0011-phy-usb-bdc-Fix-occasional-failure-with-BDC-on-7211.patch
deleted file mode 100644
index 80ec141685..0000000000
--- a/target/linux/bcm4908/patches-5.4/084-v5.6-0011-phy-usb-bdc-Fix-occasional-failure-with-BDC-on-7211.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From bed63b636fedf47dbab899a5193ec5ec4539f6fc Mon Sep 17 00:00:00 2001
-From: Al Cooper <alcooperx@gmail.com>
-Date: Fri, 3 Jan 2020 13:18:09 -0500
-Subject: [PATCH] phy: usb: bdc: Fix occasional failure with BDC on 7211
-
-The BDC "Read Transaction Size" needs to be changed from 1024
-bytes to 256 bytes to prevent occasional transaction failures.
-
-Signed-off-by: Al Cooper <alcooperx@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- .../phy/broadcom/phy-brcm-usb-init-synopsys.c | 18 +++++++++++++++
- drivers/phy/broadcom/phy-brcm-usb-init.h      |  1 +
- drivers/phy/broadcom/phy-brcm-usb.c           | 23 +++++++++++++++----
- 3 files changed, 38 insertions(+), 4 deletions(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
-@@ -70,6 +70,11 @@
- #define USB_GMDIOCSR	0
- #define USB_GMDIOGEN	4
- 
-+/* Register definitions for the BDC EC block in 7211b0 */
-+#define BDC_EC_AXIRDA			0x0c
-+#define   BDC_EC_AXIRDA_RTS_MASK			0xf0000000
-+#define   BDC_EC_AXIRDA_RTS_SHIFT			28
-+
- 
- static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params,
- 				  uint8_t addr, uint16_t data)
-@@ -198,6 +203,7 @@ static void usb_init_common_7211b0(struc
- {
- 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
- 	void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY];
-+	void __iomem *bdc_ec = params->regs[BRCM_REGS_BDC_EC];
- 	int timeout_ms = PHY_LOCK_TIMEOUT_MS;
- 	u32 reg;
- 
-@@ -231,6 +237,18 @@ static void usb_init_common_7211b0(struc
- 	usb_init_common(params);
- 
- 	/*
-+	 * The BDC controller will get occasional failures with
-+	 * the default "Read Transaction Size" of 6 (1024 bytes).
-+	 * Set it to 4 (256 bytes).
-+	 */
-+	if ((params->mode != USB_CTLR_MODE_HOST) && bdc_ec) {
-+		reg = brcm_usb_readl(bdc_ec + BDC_EC_AXIRDA);
-+		reg &= ~BDC_EC_AXIRDA_RTS_MASK;
-+		reg |= (0x4 << BDC_EC_AXIRDA_RTS_SHIFT);
-+		brcm_usb_writel(reg, bdc_ec + BDC_EC_AXIRDA);
-+	}
-+
-+	/*
- 	 * Disable FSM, otherwise the PHY will auto suspend when no
- 	 * device is connected and will be reset on resume.
- 	 */
---- a/drivers/phy/broadcom/phy-brcm-usb-init.h
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
-@@ -19,6 +19,7 @@ enum brcmusb_reg_sel {
- 	BRCM_REGS_XHCI_GBL,
- 	BRCM_REGS_USB_PHY,
- 	BRCM_REGS_USB_MDIO,
-+	BRCM_REGS_BDC_EC,
- 	BRCM_REGS_MAX
- };
- 
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -36,6 +36,7 @@ struct value_to_name_map {
- struct match_chip_info {
- 	void *init_func;
- 	u8 required_regs[BRCM_REGS_MAX + 1];
-+	u8 optional_reg;
- };
- 
- static struct value_to_name_map brcm_dr_mode_to_name[] = {
-@@ -71,7 +72,7 @@ struct brcm_usb_phy_data {
- };
- 
- static s8 *node_reg_names[BRCM_REGS_MAX] = {
--	"crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio"
-+	"crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
- };
- 
- static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id)
-@@ -271,6 +272,7 @@ static struct match_chip_info chip_info_
- 		BRCM_REGS_USB_MDIO,
- 		-1,
- 	},
-+	.optional_reg = BRCM_REGS_BDC_EC,
- };
- 
- static struct match_chip_info chip_info_7445 = {
-@@ -300,7 +302,8 @@ static const struct of_device_id brcm_us
- 
- static int brcm_usb_get_regs(struct platform_device *pdev,
- 			     enum brcmusb_reg_sel regs,
--			     struct  brcm_usb_init_params *ini)
-+			     struct  brcm_usb_init_params *ini,
-+			     bool optional)
- {
- 	struct resource *res;
- 
-@@ -317,7 +320,13 @@ static int brcm_usb_get_regs(struct plat
- 				return 0;
- 		}
- 		if (res == NULL) {
--			dev_err(&pdev->dev, "can't get %s base address\n",
-+			if (optional) {
-+				dev_dbg(&pdev->dev,
-+					"Optional reg %s not found\n",
-+					node_reg_names[regs]);
-+				return 0;
-+			}
-+			dev_err(&pdev->dev, "can't get %s base addr\n",
- 				node_reg_names[regs]);
- 			return 1;
- 		}
-@@ -460,7 +469,13 @@ static int brcm_usb_phy_probe(struct pla
- 			break;
- 
- 		err = brcm_usb_get_regs(pdev, info->required_regs[x],
--					&priv->ini);
-+					&priv->ini, false);
-+		if (err)
-+			return -EINVAL;
-+	}
-+	if (info->optional_reg) {
-+		err = brcm_usb_get_regs(pdev, info->optional_reg,
-+					&priv->ini, true);
- 		if (err)
- 			return -EINVAL;
- 	}
diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0012-phy-usb-USB-driver-is-crashing-during-S3-resume-on-7.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0012-phy-usb-USB-driver-is-crashing-during-S3-resume-on-7.patch
deleted file mode 100644
index b10f86d0a3..0000000000
--- a/target/linux/bcm4908/patches-5.4/084-v5.6-0012-phy-usb-USB-driver-is-crashing-during-S3-resume-on-7.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 5dfe1cec580829faa49842672a25481b104c26ef Mon Sep 17 00:00:00 2001
-From: Al Cooper <alcooperx@gmail.com>
-Date: Fri, 3 Jan 2020 13:18:10 -0500
-Subject: [PATCH] phy: usb: USB driver is crashing during S3 resume on 7216
-
-This is a result of the USB 2.0 clocks not being disabled/enabled
-during suspend/resume on XHCI only systems.
-
-Signed-off-by: Al Cooper <alcooperx@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/broadcom/phy-brcm-usb.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -543,7 +543,7 @@ static int brcm_usb_phy_suspend(struct d
- 		brcm_usb_wake_enable(&priv->ini, true);
- 		if (priv->phys[BRCM_USB_PHY_3_0].inited)
- 			clk_disable_unprepare(priv->usb_30_clk);
--		if (priv->phys[BRCM_USB_PHY_2_0].inited)
-+		if (priv->phys[BRCM_USB_PHY_2_0].inited || !priv->has_eohci)
- 			clk_disable_unprepare(priv->usb_20_clk);
- 		if (priv->wake_irq >= 0)
- 			enable_irq_wake(priv->wake_irq);
diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0013-phy-usb-Add-support-for-wake-and-USB-low-power-mode-.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0013-phy-usb-Add-support-for-wake-and-USB-low-power-mode-.patch
deleted file mode 100644
index 5a3a687adb..0000000000
--- a/target/linux/bcm4908/patches-5.4/084-v5.6-0013-phy-usb-Add-support-for-wake-and-USB-low-power-mode-.patch
+++ /dev/null
@@ -1,328 +0,0 @@
-From b0c0b66c0b432d3f3a1ae5849298ba9c7f1810c5 Mon Sep 17 00:00:00 2001
-From: Al Cooper <alcooperx@gmail.com>
-Date: Fri, 3 Jan 2020 13:18:11 -0500
-Subject: [PATCH] phy: usb: Add support for wake and USB low power mode for
- 7211 S2/S5
-
-Add support for 7211 USB wake. Disable all possible 7211 USB logic
-for S2/S5 if USB wake is not enabled.
-
-On the 7211, the XHCI wake signal was not connected properly and
-only goes to the USB1_USB1_CTRL_TP_DIAG1 diagonstic register.
-The workaround is to have VPU code running that polls for the
-proper bit in the DIAG register and to wake the system when
-the bit is asserted.
-
-Signed-off-by: Al Cooper <alcooperx@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- .../phy/broadcom/phy-brcm-usb-init-synopsys.c | 77 +++++++++++++++++--
- drivers/phy/broadcom/phy-brcm-usb-init.c      | 26 ++++---
- drivers/phy/broadcom/phy-brcm-usb-init.h      | 11 +--
- drivers/phy/broadcom/phy-brcm-usb.c           | 25 ++++--
- 4 files changed, 105 insertions(+), 34 deletions(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
-@@ -26,7 +26,6 @@
- #define   PIARBCTL_MISC_CAM1_MEM_PAGE_MASK		0x00000f00
- #define   PIARBCTL_MISC_CAM0_MEM_PAGE_MASK		0x000000f0
- #define   PIARBCTL_MISC_SATA_PRIORITY_MASK		0x0000000f
--#define PIARBCTL_USB_M_ASB_CTRL		0x10
- 
- #define PIARBCTL_MISC_USB_ONLY_MASK		\
- 	(PIARBCTL_MISC_USB_SELECT_MASK |	\
-@@ -51,14 +50,27 @@
- #define USB_CTRL_USB_PM_STATUS		0x08
- #define USB_CTRL_USB_DEVICE_CTL1	0x10
- #define   USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK	0x00000003
-+#define USB_CTRL_TEST_PORT_CTL		0x30
-+#define   USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_MASK	0x000000ff
-+#define   USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_PME_GEN_MASK	0x0000002e
-+#define USB_CTRL_TP_DIAG1		0x34
-+#define   USB_CTLR_TP_DIAG1_wake_MASK	0x00000002
-+#define USB_CTRL_CTLR_CSHCR		0x50
-+#define   USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK	0x00040000
- 
- /* Register definitions for the USB_PHY block in 7211b0 */
-+#define USB_PHY_PLL_CTL			0x00
-+#define   USB_PHY_PLL_CTL_PLL_RESETB_MASK		0x40000000
- #define USB_PHY_PLL_LDO_CTL		0x08
- #define   USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK		0x00000004
-+#define   USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK	0x00000002
-+#define   USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK	0x00000001
- #define USB_PHY_UTMI_CTL_1		0x04
- #define   USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK	0x00000800
- #define   USB_PHY_UTMI_CTL_1_PHY_MODE_MASK		0x0000000c
- #define   USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT		2
-+#define USB_PHY_IDDQ			0x1c
-+#define   USB_PHY_IDDQ_phy_iddq_MASK			0x00000001
- #define USB_PHY_STATUS			0x20
- #define   USB_PHY_STATUS_pll_lock_MASK			0x00000001
- 
-@@ -199,6 +211,17 @@ static void usb_init_common(struct brcm_
- 	}
- }
- 
-+static void usb_wake_enable_7211b0(struct brcm_usb_init_params *params,
-+				   bool enable)
-+{
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
-+
-+	if (enable)
-+		USB_CTRL_SET(ctrl, CTLR_CSHCR, ctl_pme_en);
-+	else
-+		USB_CTRL_UNSET(ctrl, CTLR_CSHCR, ctl_pme_en);
-+}
-+
- static void usb_init_common_7211b0(struct brcm_usb_init_params *params)
- {
- 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
-@@ -210,9 +233,27 @@ static void usb_init_common_7211b0(struc
- 	if (params->syscon_piarbctl)
- 		syscon_piarbctl_init(params->syscon_piarbctl);
- 
-+	USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN);
-+
-+	usb_wake_enable_7211b0(params, false);
-+	if (!params->wake_enabled) {
-+
-+		/* undo possible suspend settings */
-+		brcm_usb_writel(0, usb_phy + USB_PHY_IDDQ);
-+		reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
-+		reg |= USB_PHY_PLL_CTL_PLL_RESETB_MASK;
-+		brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);
-+
-+		/* temporarily enable FSM so PHY comes up properly */
-+		reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
-+		reg |= USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK;
-+		brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
-+	}
-+
- 	/* Init the PHY */
--	reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_LDO_CTL);
--	reg |= USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK;
-+	reg = USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK |
-+		USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK |
-+		USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK;
- 	brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL);
- 
- 	/* wait for lock */
-@@ -276,12 +317,36 @@ static void usb_uninit_common(struct brc
- 
- }
- 
-+static void usb_uninit_common_7211b0(struct brcm_usb_init_params *params)
-+{
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
-+	void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY];
-+	u32 reg;
-+
-+	pr_debug("%s\n", __func__);
-+
-+	if (params->wake_enabled) {
-+		USB_CTRL_SET(ctrl, TEST_PORT_CTL, TPOUT_SEL_PME_GEN);
-+		usb_wake_enable_7211b0(params, true);
-+	} else {
-+		USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
-+		brcm_usb_writel(0, usb_phy + USB_PHY_PLL_LDO_CTL);
-+		reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
-+		reg &= ~USB_PHY_PLL_CTL_PLL_RESETB_MASK;
-+		brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);
-+		brcm_usb_writel(USB_PHY_IDDQ_phy_iddq_MASK,
-+				usb_phy + USB_PHY_IDDQ);
-+	}
-+
-+}
-+
- static void usb_uninit_xhci(struct brcm_usb_init_params *params)
- {
- 
- 	pr_debug("%s\n", __func__);
- 
--	xhci_soft_reset(params, 1);
-+	if (!params->wake_enabled)
-+		xhci_soft_reset(params, 1);
- }
- 
- static int usb_get_dual_select(struct brcm_usb_init_params *params)
-@@ -309,7 +374,6 @@ static void usb_set_dual_select(struct b
- 	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
- }
- 
--
- static const struct brcm_usb_init_ops bcm7216_ops = {
- 	.init_ipp = usb_init_ipp,
- 	.init_common = usb_init_common,
-@@ -324,7 +388,7 @@ static const struct brcm_usb_init_ops bc
- 	.init_ipp = usb_init_ipp,
- 	.init_common = usb_init_common_7211b0,
- 	.init_xhci = usb_init_xhci,
--	.uninit_common = usb_uninit_common,
-+	.uninit_common = usb_uninit_common_7211b0,
- 	.uninit_xhci = usb_uninit_xhci,
- 	.get_dual_select = usb_get_dual_select,
- 	.set_dual_select = usb_set_dual_select,
-@@ -346,4 +410,5 @@ void brcm_usb_dvr_init_7211b0(struct brc
- 
- 	params->family_name = "7211";
- 	params->ops = &bcm7211b0_ops;
-+	params->suspend_with_clocks = true;
- }
---- a/drivers/phy/broadcom/phy-brcm-usb-init.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
-@@ -783,12 +783,24 @@ static void usb_init_ipp(struct brcm_usb
- 		msleep(50);
- }
- 
-+static void usb_wake_enable(struct brcm_usb_init_params *params,
-+			  bool enable)
-+{
-+	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
-+
-+	if (enable)
-+		USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN);
-+	else
-+		USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN);
-+}
-+
- static void usb_init_common(struct brcm_usb_init_params *params)
- {
- 	u32 reg;
- 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
- 
- 	/* Clear any pending wake conditions */
-+	usb_wake_enable(params, false);
- 	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS));
- 	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS));
- 
-@@ -935,6 +947,8 @@ static void usb_uninit_common(struct brc
- 
- 	if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN))
- 		USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN);
-+	if (params->wake_enabled)
-+		usb_wake_enable(params, true);
- }
- 
- static void usb_uninit_eohci(struct brcm_usb_init_params *params)
-@@ -978,17 +992,6 @@ static void usb_set_dual_select(struct b
- 	}
- }
- 
--static void usb_wake_enable(struct brcm_usb_init_params *params,
--			  int enable)
--{
--	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
--
--	if (enable)
--		USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN);
--	else
--		USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN);
--}
--
- static const struct brcm_usb_init_ops bcm7445_ops = {
- 	.init_ipp = usb_init_ipp,
- 	.init_common = usb_init_common,
-@@ -999,7 +1002,6 @@ static const struct brcm_usb_init_ops bc
- 	.uninit_xhci = usb_uninit_xhci,
- 	.get_dual_select = usb_get_dual_select,
- 	.set_dual_select = usb_set_dual_select,
--	.wake_enable = usb_wake_enable,
- };
- 
- void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params)
---- a/drivers/phy/broadcom/phy-brcm-usb-init.h
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
-@@ -46,8 +46,6 @@ struct brcm_usb_init_ops {
- 	void (*uninit_xhci)(struct brcm_usb_init_params *params);
- 	int  (*get_dual_select)(struct brcm_usb_init_params *params);
- 	void (*set_dual_select)(struct brcm_usb_init_params *params, int mode);
--	void (*wake_enable)(struct brcm_usb_init_params *params,
--			    int enable);
- };
- 
- struct  brcm_usb_init_params {
-@@ -62,6 +60,8 @@ struct  brcm_usb_init_params {
- 	const u32 *usb_reg_bits_map;
- 	const struct brcm_usb_init_ops *ops;
- 	struct regmap *syscon_piarbctl;
-+	bool wake_enabled;
-+	bool suspend_with_clocks;
- };
- 
- void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params);
-@@ -145,13 +145,6 @@ static inline void brcm_usb_uninit_xhci(
- 		ini->ops->uninit_xhci(ini);
- }
- 
--static inline void brcm_usb_wake_enable(struct brcm_usb_init_params *ini,
--	int enable)
--{
--	if (ini->ops->wake_enable)
--		ini->ops->wake_enable(ini, enable);
--}
--
- static inline int brcm_usb_get_dual_select(struct brcm_usb_init_params *ini)
- {
- 	if (ini->ops->get_dual_select)
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -535,16 +535,26 @@ static int brcm_usb_phy_suspend(struct d
- 	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
- 
- 	if (priv->init_count) {
-+		priv->ini.wake_enabled = device_may_wakeup(dev);
- 		if (priv->phys[BRCM_USB_PHY_3_0].inited)
- 			brcm_usb_uninit_xhci(&priv->ini);
- 		if (priv->phys[BRCM_USB_PHY_2_0].inited)
- 			brcm_usb_uninit_eohci(&priv->ini);
- 		brcm_usb_uninit_common(&priv->ini);
--		brcm_usb_wake_enable(&priv->ini, true);
--		if (priv->phys[BRCM_USB_PHY_3_0].inited)
--			clk_disable_unprepare(priv->usb_30_clk);
--		if (priv->phys[BRCM_USB_PHY_2_0].inited || !priv->has_eohci)
--			clk_disable_unprepare(priv->usb_20_clk);
-+
-+		/*
-+		 * Handle the clocks unless needed for wake. This has
-+		 * to work for both older XHCI->3.0-clks, EOHCI->2.0-clks
-+		 * and newer XHCI->2.0-clks/3.0-clks.
-+		 */
-+
-+		if (!priv->ini.suspend_with_clocks) {
-+			if (priv->phys[BRCM_USB_PHY_3_0].inited)
-+				clk_disable_unprepare(priv->usb_30_clk);
-+			if (priv->phys[BRCM_USB_PHY_2_0].inited ||
-+			    !priv->has_eohci)
-+				clk_disable_unprepare(priv->usb_20_clk);
-+		}
- 		if (priv->wake_irq >= 0)
- 			enable_irq_wake(priv->wake_irq);
- 	}
-@@ -557,7 +567,6 @@ static int brcm_usb_phy_resume(struct de
- 
- 	clk_prepare_enable(priv->usb_20_clk);
- 	clk_prepare_enable(priv->usb_30_clk);
--	brcm_usb_wake_enable(&priv->ini, false);
- 	brcm_usb_init_ipp(&priv->ini);
- 
- 	/*
-@@ -579,6 +588,8 @@ static int brcm_usb_phy_resume(struct de
- 		} else if (priv->has_xhci) {
- 			brcm_usb_uninit_xhci(&priv->ini);
- 			clk_disable_unprepare(priv->usb_30_clk);
-+			if (!priv->has_eohci)
-+				clk_disable_unprepare(priv->usb_20_clk);
- 		}
- 	} else {
- 		if (priv->has_xhci)
-@@ -589,7 +600,7 @@ static int brcm_usb_phy_resume(struct de
- 		clk_disable_unprepare(priv->usb_20_clk);
- 		clk_disable_unprepare(priv->usb_30_clk);
- 	}
--
-+	priv->ini.wake_enabled = false;
- 	return 0;
- }
- #endif /* CONFIG_PM_SLEEP */
diff --git a/target/linux/bcm4908/patches-5.4/085-v5.8-0001-phy-phy-brcm-usb-Constify-static-structs.patch b/target/linux/bcm4908/patches-5.4/085-v5.8-0001-phy-phy-brcm-usb-Constify-static-structs.patch
deleted file mode 100644
index 36683fc437..0000000000
--- a/target/linux/bcm4908/patches-5.4/085-v5.8-0001-phy-phy-brcm-usb-Constify-static-structs.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From c79cc3d55c4bf94e9028d6818d449fbdc488eac5 Mon Sep 17 00:00:00 2001
-From: Rikard Falkeborn <rikard.falkeborn@gmail.com>
-Date: Sat, 16 May 2020 14:04:41 +0200
-Subject: [PATCH] phy: phy-brcm-usb: Constify static structs
-
-A number of structs were not modified and can therefore be made const
-to allow the compiler to put them in read-only memory.
-
-In order to do so, update a few functions that don't modify there input
-to take pointers to const.
-
-Before:
-   text    data     bss     dec     hex filename
-  15511    6448      64   22023    5607 drivers/phy/broadcom/phy-brcm-usb.o
-
-After:
-   text    data     bss     dec     hex filename
-  16058    5936      64   22058    562a drivers/phy/broadcom/phy-brcm-usb.o
-
-Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
-Link: https://lore.kernel.org/r/20200516120441.7627-4-rikard.falkeborn@gmail.com
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/broadcom/phy-brcm-usb.c | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -39,14 +39,14 @@ struct match_chip_info {
- 	u8 optional_reg;
- };
- 
--static struct value_to_name_map brcm_dr_mode_to_name[] = {
-+static const struct value_to_name_map brcm_dr_mode_to_name[] = {
- 	{ USB_CTLR_MODE_HOST, "host" },
- 	{ USB_CTLR_MODE_DEVICE, "peripheral" },
- 	{ USB_CTLR_MODE_DRD, "drd" },
- 	{ USB_CTLR_MODE_TYPEC_PD, "typec-pd" }
- };
- 
--static struct value_to_name_map brcm_dual_mode_to_name[] = {
-+static const struct value_to_name_map brcm_dual_mode_to_name[] = {
- 	{ 0, "host" },
- 	{ 1, "device" },
- 	{ 2, "auto" },
-@@ -138,7 +138,7 @@ static int brcm_usb_phy_exit(struct phy
- 	return 0;
- }
- 
--static struct phy_ops brcm_usb_phy_ops = {
-+static const struct phy_ops brcm_usb_phy_ops = {
- 	.init		= brcm_usb_phy_init,
- 	.exit		= brcm_usb_phy_exit,
- 	.owner		= THIS_MODULE,
-@@ -170,7 +170,7 @@ static struct phy *brcm_usb_phy_xlate(st
- 	return ERR_PTR(-ENODEV);
- }
- 
--static int name_to_value(struct value_to_name_map *table, int count,
-+static int name_to_value(const struct value_to_name_map *table, int count,
- 			 const char *name, int *value)
- {
- 	int x;
-@@ -185,7 +185,7 @@ static int name_to_value(struct value_to
- 	return -EINVAL;
- }
- 
--static const char *value_to_name(struct value_to_name_map *table, int count,
-+static const char *value_to_name(const struct value_to_name_map *table, int count,
- 				 int value)
- {
- 	if (value >= count)
-@@ -252,7 +252,7 @@ static const struct attribute_group brcm
- 	.attrs = brcm_usb_phy_attrs,
- };
- 
--static struct match_chip_info chip_info_7216 = {
-+static const struct match_chip_info chip_info_7216 = {
- 	.init_func = &brcm_usb_dvr_init_7216,
- 	.required_regs = {
- 		BRCM_REGS_CTRL,
-@@ -262,7 +262,7 @@ static struct match_chip_info chip_info_
- 	},
- };
- 
--static struct match_chip_info chip_info_7211b0 = {
-+static const struct match_chip_info chip_info_7211b0 = {
- 	.init_func = &brcm_usb_dvr_init_7211b0,
- 	.required_regs = {
- 		BRCM_REGS_CTRL,
-@@ -275,7 +275,7 @@ static struct match_chip_info chip_info_
- 	.optional_reg = BRCM_REGS_BDC_EC,
- };
- 
--static struct match_chip_info chip_info_7445 = {
-+static const struct match_chip_info chip_info_7445 = {
- 	.init_func = &brcm_usb_dvr_init_7445,
- 	.required_regs = {
- 		BRCM_REGS_CTRL,
diff --git a/target/linux/bcm4908/patches-5.4/086-v5.12-0001-phy-phy-brcm-usb-improve-getting-OF-matching-data.patch b/target/linux/bcm4908/patches-5.4/086-v5.12-0001-phy-phy-brcm-usb-improve-getting-OF-matching-data.patch
deleted file mode 100644
index cc71373165..0000000000
--- a/target/linux/bcm4908/patches-5.4/086-v5.12-0001-phy-phy-brcm-usb-improve-getting-OF-matching-data.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From d14f4cce9340a6586512a0eb6bc680dedeaaef14 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 16 Dec 2020 15:33:04 +0100
-Subject: [PATCH] phy: phy-brcm-usb: improve getting OF matching data
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1. Use of_device_get_match_data() helper to simplify the code
-2. Check for NULL as a good practice
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20201216143305.12179-1-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/phy/broadcom/phy-brcm-usb.c | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -11,6 +11,7 @@
- #include <linux/io.h>
- #include <linux/module.h>
- #include <linux/of.h>
-+#include <linux/of_device.h>
- #include <linux/phy/phy.h>
- #include <linux/platform_device.h>
- #include <linux/interrupt.h>
-@@ -427,7 +428,6 @@ static int brcm_usb_phy_probe(struct pla
- 	struct device_node *dn = pdev->dev.of_node;
- 	int err;
- 	const char *mode;
--	const struct of_device_id *match;
- 	void (*dvr_init)(struct brcm_usb_init_params *params);
- 	const struct match_chip_info *info;
- 	struct regmap *rmap;
-@@ -441,8 +441,9 @@ static int brcm_usb_phy_probe(struct pla
- 	priv->ini.family_id = brcmstb_get_family_id();
- 	priv->ini.product_id = brcmstb_get_product_id();
- 
--	match = of_match_node(brcm_usb_dt_ids, dev->of_node);
--	info = match->data;
-+	info = of_device_get_match_data(&pdev->dev);
-+	if (!info)
-+		return -ENOENT;
- 	dvr_init = info->init_func;
- 	(*dvr_init)(&priv->ini);
- 
diff --git a/target/linux/bcm4908/patches-5.4/086-v5.12-0002-phy-phy-brcm-usb-specify-init-function-format-at-str.patch b/target/linux/bcm4908/patches-5.4/086-v5.12-0002-phy-phy-brcm-usb-specify-init-function-format-at-str.patch
deleted file mode 100644
index bdc932732c..0000000000
--- a/target/linux/bcm4908/patches-5.4/086-v5.12-0002-phy-phy-brcm-usb-specify-init-function-format-at-str.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 915f1d230e5292bc2156a9997bcb19d9e632f10b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 16 Dec 2020 15:33:05 +0100
-Subject: [PATCH] phy: phy-brcm-usb: specify init function format at struct
- level
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is slightly cleaner solution that assures noone assings a wrong
-function to the pointer.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20201216143305.12179-2-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/phy/broadcom/phy-brcm-usb.c | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -35,7 +35,7 @@ struct value_to_name_map {
- };
- 
- struct match_chip_info {
--	void *init_func;
-+	void (*init_func)(struct brcm_usb_init_params *params);
- 	u8 required_regs[BRCM_REGS_MAX + 1];
- 	u8 optional_reg;
- };
-@@ -428,7 +428,6 @@ static int brcm_usb_phy_probe(struct pla
- 	struct device_node *dn = pdev->dev.of_node;
- 	int err;
- 	const char *mode;
--	void (*dvr_init)(struct brcm_usb_init_params *params);
- 	const struct match_chip_info *info;
- 	struct regmap *rmap;
- 	int x;
-@@ -444,8 +443,8 @@ static int brcm_usb_phy_probe(struct pla
- 	info = of_device_get_match_data(&pdev->dev);
- 	if (!info)
- 		return -ENOENT;
--	dvr_init = info->init_func;
--	(*dvr_init)(&priv->ini);
-+
-+	info->init_func(&priv->ini);
- 
- 	dev_dbg(dev, "Best mapping table is for %s\n",
- 		priv->ini.family_name);
diff --git a/target/linux/bcm4908/patches-5.4/086-v5.12-0003-dt-bindings-phy-brcm-brcmstb-usb-phy-convert-to-the-.patch b/target/linux/bcm4908/patches-5.4/086-v5.12-0003-dt-bindings-phy-brcm-brcmstb-usb-phy-convert-to-the-.patch
deleted file mode 100644
index 1edd63ea5d..0000000000
--- a/target/linux/bcm4908/patches-5.4/086-v5.12-0003-dt-bindings-phy-brcm-brcmstb-usb-phy-convert-to-the-.patch
+++ /dev/null
@@ -1,315 +0,0 @@
-From b39069a482ade0c5e18c407c3218ba1aeed371b6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 6 Jan 2021 21:58:36 +0100
-Subject: [PATCH] dt-bindings: phy: brcm, brcmstb-usb-phy: convert to the
- json-schema
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Changes that require mentioning:
-1. interrupt-names
-   Name "wakeup" was changed to the "wake". It matches example and what
-   Linux driver looks for in the first place
-2. brcm,ipp and brcm,ioc
-   Both were described as booleans with 0 / 1 values. In examples they
-   were integers and Linux checks for int as well. Both got uint32.
-3. Added minimal description
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20210106205838.10964-1-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- .../bindings/phy/brcm,brcmstb-usb-phy.txt     |  86 --------
- .../bindings/phy/brcm,brcmstb-usb-phy.yaml    | 193 ++++++++++++++++++
- 2 files changed, 193 insertions(+), 86 deletions(-)
- delete mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
- create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
-
---- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
-+++ /dev/null
-@@ -1,86 +0,0 @@
--Broadcom STB USB PHY
--
--Required properties:
--- compatible: should be one of
--	"brcm,brcmstb-usb-phy"
--	"brcm,bcm7216-usb-phy"
--	"brcm,bcm7211-usb-phy"
--
--- reg and reg-names properties requirements are specific to the
--  compatible string.
--  "brcm,brcmstb-usb-phy":
--    - reg: 1 or 2 offset and length pairs. One for the base CTRL registers
--           and an optional pair for systems with USB 3.x support
--    - reg-names: not specified
--  "brcm,bcm7216-usb-phy":
--    - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL
--           registers
--    - reg-names: "ctrl", "xhci_ec", "xhci_gbl"
--  "brcm,bcm7211-usb-phy":
--    - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL,
--           USB_PHY and USB_MDIO registers and an optional pair
--	   for the BDC registers
--    - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
--
--- #phy-cells: Shall be 1 as it expects one argument for setting
--	      the type of the PHY. Possible values are:
--	      - PHY_TYPE_USB2 for USB1.1/2.0 PHY
--	      - PHY_TYPE_USB3 for USB3.x PHY
--
--Optional Properties:
--- clocks : clock phandles.
--- clock-names: String, clock name.
--- interrupts: wakeup interrupt
--- interrupt-names: "wakeup"
--- brcm,ipp: Boolean, Invert Port Power.
--  Possible values are: 0 (Don't invert), 1 (Invert)
--- brcm,ioc: Boolean, Invert Over Current detection.
--  Possible values are: 0 (Don't invert), 1 (Invert)
--- dr_mode: String, PHY Device mode.
--  Possible values are: "host", "peripheral ", "drd" or "typec-pd"
--  If this property is not defined, the phy will default to "host" mode.
--- brcm,syscon-piarbctl: phandle to syscon for handling config registers
--NOTE: one or both of the following two properties must be set
--- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
--- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
--
--
--Example:
--
--usbphy_0: usb-phy@f0470200 {
--	reg = <0xf0470200 0xb8>,
--		<0xf0471940 0x6c0>;
--	compatible = "brcm,brcmstb-usb-phy";
--	#phy-cells = <1>;
--	dr_mode = "host"
--	brcm,ioc = <1>;
--	brcm,ipp = <1>;
--	brcm,has-xhci;
--	brcm,has-eohci;
--	clocks = <&usb20>, <&usb30>;
--	clock-names = "sw_usb", "sw_usb3";
--};
--
--usb-phy@29f0200 {
--	reg = <0x29f0200 0x200>,
--		<0x29c0880 0x30>,
--		<0x29cc100 0x534>,
--		<0x2808000 0x24>,
--		<0x2980080 0x8>;
--	reg-names = "ctrl",
--		"xhci_ec",
--		"xhci_gbl",
--		"usb_phy",
--		"usb_mdio";
--	brcm,ioc = <0x0>;
--	brcm,ipp = <0x0>;
--	compatible = "brcm,bcm7211-usb-phy";
--	interrupts = <0x30>;
--	interrupt-parent = <&vpu_intr1_nosec_intc>;
--	interrupt-names = "wake";
--	#phy-cells = <0x1>;
--	brcm,has-xhci;
--	syscon-piarbctl = <&syscon_piarbctl>;
--	clocks = <&scmi_clk 256>;
--	clock-names = "sw_usb";
--};
---- /dev/null
-+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
-@@ -0,0 +1,193 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/phy/brcm,brcmstb-usb-phy.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom STB USB PHY
-+
-+description: Broadcom's PHY that handles EHCI/OHCI and/or XHCI
-+
-+maintainers:
-+  - Al Cooper <alcooperx@gmail.com>
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  compatible:
-+    enum:
-+      - brcm,bcm7211-usb-phy
-+      - brcm,bcm7216-usb-phy
-+      - brcm,brcmstb-usb-phy
-+
-+  reg:
-+    minItems: 1
-+    maxItems: 6
-+    items:
-+      - description: the base CTRL register
-+      - description: XHCI EC register
-+      - description: XHCI GBL register
-+      - description: USB PHY register
-+      - description: USB MDIO register
-+      - description: BDC register
-+
-+  reg-names:
-+    minItems: 1
-+    maxItems: 6
-+    items:
-+      - const: ctrl
-+      - const: xhci_ec
-+      - const: xhci_gbl
-+      - const: usb_phy
-+      - const: usb_mdio
-+      - const: bdc_ec
-+
-+  clocks:
-+    minItems: 1
-+    maxItems: 2
-+
-+  clock-names:
-+    minItems: 1
-+    maxItems: 2
-+    items:
-+      - const: sw_usb
-+      - const: sw_usb3
-+
-+  interrupts:
-+    description: wakeup interrupt
-+
-+  interrupt-names:
-+    const: wake
-+
-+  brcm,ipp:
-+    $ref: /schemas/types.yaml#/definitions/uint32
-+    description: Invert Port Power
-+    minimum: 0
-+    maximum: 1
-+
-+  brcm,ioc:
-+    $ref: /schemas/types.yaml#/definitions/uint32
-+    description: Invert Over Current detection
-+    minimum: 0
-+    maximum: 1
-+
-+  dr_mode:
-+    description: PHY Device mode. If this property is not defined, the PHY will
-+      default to "host" mode.
-+    enum:
-+      - host
-+      - peripheral
-+      - drd
-+      - typec-pd
-+
-+  brcm,syscon-piarbctl:
-+    description: phandle to syscon for handling config registers
-+    $ref: /schemas/types.yaml#/definitions/phandle
-+
-+  brcm,has-xhci:
-+    description: Indicates the PHY has an XHCI PHY.
-+    type: boolean
-+
-+  brcm,has-eohci:
-+    description: Indicates the PHY has an EHCI/OHCI PHY.
-+    type: boolean
-+
-+  "#phy-cells":
-+    description: |
-+      Cell allows setting the type of the PHY. Possible values are:
-+      - PHY_TYPE_USB2 for USB1.1/2.0 PHY
-+      - PHY_TYPE_USB3 for USB3.x PHY
-+    const: 1
-+
-+required:
-+  - reg
-+  - "#phy-cells"
-+
-+anyOf:
-+  - required:
-+      - brcm,has-xhci
-+  - required:
-+      - brcm,has-eohci
-+
-+allOf:
-+  - if:
-+      properties:
-+        compatible:
-+          contains:
-+            const: brcm,brcmstb-usb-phy
-+    then:
-+      properties:
-+        reg:
-+          minItems: 1
-+          maxItems: 2
-+  - if:
-+      properties:
-+        compatible:
-+          contains:
-+            const: brcm,bcm7211-usb-phy
-+    then:
-+      properties:
-+        reg:
-+          minItems: 5
-+          maxItems: 6
-+        reg-names:
-+          minItems: 5
-+          maxItems: 6
-+  - if:
-+      properties:
-+        compatible:
-+          contains:
-+            const: brcm,bcm7216-usb-phy
-+    then:
-+      properties:
-+        reg:
-+          minItems: 3
-+          maxItems: 3
-+        reg-names:
-+          minItems: 3
-+          maxItems: 3
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    #include <dt-bindings/phy/phy.h>
-+
-+    usb-phy@f0470200 {
-+        compatible = "brcm,brcmstb-usb-phy";
-+        reg = <0xf0470200 0xb8>,
-+              <0xf0471940 0x6c0>;
-+        #phy-cells = <1>;
-+        dr_mode = "host";
-+        brcm,ioc = <1>;
-+        brcm,ipp = <1>;
-+        brcm,has-xhci;
-+        brcm,has-eohci;
-+        clocks = <&usb20>, <&usb30>;
-+        clock-names = "sw_usb", "sw_usb3";
-+    };
-+  - |
-+    #include <dt-bindings/phy/phy.h>
-+
-+    usb-phy@29f0200 {
-+        compatible = "brcm,bcm7211-usb-phy";
-+        reg = <0x29f0200 0x200>,
-+              <0x29c0880 0x30>,
-+              <0x29cc100 0x534>,
-+              <0x2808000 0x24>,
-+              <0x2980080 0x8>;
-+        reg-names = "ctrl",
-+            "xhci_ec",
-+            "xhci_gbl",
-+            "usb_phy",
-+            "usb_mdio";
-+        brcm,ioc = <0x0>;
-+        brcm,ipp = <0x0>;
-+        interrupts = <0x30>;
-+        interrupt-parent = <&vpu_intr1_nosec_intc>;
-+        interrupt-names = "wake";
-+        #phy-cells = <0x1>;
-+        brcm,has-xhci;
-+        brcm,syscon-piarbctl = <&syscon_piarbctl>;
-+        clocks = <&scmi_clk 256>;
-+        clock-names = "sw_usb";
-+    };
diff --git a/target/linux/bcm4908/patches-5.4/086-v5.12-0004-dt-bindings-phy-brcm-brcmstb-usb-phy-add-BCM4908-bin.patch b/target/linux/bcm4908/patches-5.4/086-v5.12-0004-dt-bindings-phy-brcm-brcmstb-usb-phy-add-BCM4908-bin.patch
deleted file mode 100644
index 6127800a43..0000000000
--- a/target/linux/bcm4908/patches-5.4/086-v5.12-0004-dt-bindings-phy-brcm-brcmstb-usb-phy-add-BCM4908-bin.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 46b616c1574def7a1629bdeded3d44e76382f950 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 6 Jan 2021 21:58:37 +0100
-Subject: [PATCH] dt-bindings: phy: brcm, brcmstb-usb-phy: add BCM4908 binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 uses the same PHY and may require just a slightly different
-programming.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20210106205838.10964-2-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- .../devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml        | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
-+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
-@@ -15,6 +15,7 @@ maintainers:
- properties:
-   compatible:
-     enum:
-+      - brcm,bcm4908-usb-phy
-       - brcm,bcm7211-usb-phy
-       - brcm,bcm7216-usb-phy
-       - brcm,brcmstb-usb-phy
-@@ -113,7 +114,9 @@ allOf:
-       properties:
-         compatible:
-           contains:
--            const: brcm,brcmstb-usb-phy
-+            enum:
-+              - const: brcm,bcm4908-usb-phy
-+              - const: brcm,brcmstb-usb-phy
-     then:
-       properties:
-         reg:
diff --git a/target/linux/bcm4908/patches-5.4/086-v5.12-0005-phy-phy-brcm-usb-support-PHY-on-the-BCM4908.patch b/target/linux/bcm4908/patches-5.4/086-v5.12-0005-phy-phy-brcm-usb-support-PHY-on-the-BCM4908.patch
deleted file mode 100644
index c021201f6b..0000000000
--- a/target/linux/bcm4908/patches-5.4/086-v5.12-0005-phy-phy-brcm-usb-support-PHY-on-the-BCM4908.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 4b402fa8e0b7817f3e3738d7828038f114e6899e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 6 Jan 2021 21:58:38 +0100
-Subject: [PATCH] phy: phy-brcm-usb: support PHY on the BCM4908
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 seems to have slightly different registers but works when
-programmed just like the STB one.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20210106205838.10964-3-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/phy/broadcom/Kconfig        | 3 ++-
- drivers/phy/broadcom/phy-brcm-usb.c | 4 ++++
- 2 files changed, 6 insertions(+), 1 deletion(-)
-
---- a/drivers/phy/broadcom/Kconfig
-+++ b/drivers/phy/broadcom/Kconfig
-@@ -83,10 +83,11 @@ config PHY_BRCM_SATA
- 
- config PHY_BRCM_USB
- 	tristate "Broadcom STB USB PHY driver"
--	depends on ARCH_BRCMSTB
-+	depends on ARCH_BCM4908 || ARCH_BRCMSTB
- 	depends on OF
- 	select GENERIC_PHY
- 	select SOC_BRCMSTB
-+	default ARCH_BCM4908
- 	default ARCH_BRCMSTB
- 	help
- 	  Enable this to support the Broadcom STB USB PHY.
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -287,6 +287,10 @@ static const struct match_chip_info chip
- 
- static const struct of_device_id brcm_usb_dt_ids[] = {
- 	{
-+		.compatible = "brcm,bcm4908-usb-phy",
-+		.data = &chip_info_7445,
-+	},
-+	{
- 		.compatible = "brcm,bcm7216-usb-phy",
- 		.data = &chip_info_7216,
- 	},
diff --git a/target/linux/bcm4908/patches-5.4/086-v5.13-0001-phy-phy-brcm-usb-select-SOC_BRCMSTB-on-brcmstb-only.patch b/target/linux/bcm4908/patches-5.4/086-v5.13-0001-phy-phy-brcm-usb-select-SOC_BRCMSTB-on-brcmstb-only.patch
deleted file mode 100644
index a341326ef4..0000000000
--- a/target/linux/bcm4908/patches-5.4/086-v5.13-0001-phy-phy-brcm-usb-select-SOC_BRCMSTB-on-brcmstb-only.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 261ab1fd5c5d2d7ff7d5bab3f5db3c69c4bcea58 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 5 Mar 2021 16:24:06 +0100
-Subject: [PATCH] phy: phy-brcm-usb: select SOC_BRCMSTB on brcmstb only
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-phy-brcm-usb has some conditional init code required on selected brcmstb
-devices. Execution of that code depends on family / product detected by
-brcmstb soc code.
-
-For ARCH_BCM4908 brcmstb soc code always return 0 values as ids. Don't
-bother selecting & compiling that redundant driver.
-
-Depends-on: 149ae80b1d50 ("soc: bcm: brcmstb: add stubs for getting platform IDs")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20210305152406.2588-1-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/phy/broadcom/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/phy/broadcom/Kconfig
-+++ b/drivers/phy/broadcom/Kconfig
-@@ -86,7 +86,7 @@ config PHY_BRCM_USB
- 	depends on ARCH_BCM4908 || ARCH_BRCMSTB
- 	depends on OF
- 	select GENERIC_PHY
--	select SOC_BRCMSTB
-+	select SOC_BRCMSTB if ARCH_BRCMSTB
- 	default ARCH_BCM4908
- 	default ARCH_BRCMSTB
- 	help
diff --git a/target/linux/bcm4908/patches-5.4/086-v5.13-0002-dt-bindings-phy-brcm-brcmstb-usb-phy-add-power-domai.patch b/target/linux/bcm4908/patches-5.4/086-v5.13-0002-dt-bindings-phy-brcm-brcmstb-usb-phy-add-power-domai.patch
deleted file mode 100644
index 4db442c0ae..0000000000
--- a/target/linux/bcm4908/patches-5.4/086-v5.13-0002-dt-bindings-phy-brcm-brcmstb-usb-phy-add-power-domai.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From d9de0cbd5b1f6b51c92a40937945f26a35d848ff Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 9 Mar 2021 19:26:16 +0100
-Subject: [PATCH] dt-bindings: phy: brcm,brcmstb-usb-phy: add power-domains
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On BCM4908 USB PHY is managed using power controller so it needs
-describing properly using the power-domains.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20210309182616.25783-1-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- .../devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml          | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
-+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
-@@ -42,6 +42,9 @@ properties:
-       - const: usb_mdio
-       - const: bdc_ec
- 
-+  power-domains:
-+    maxItems: 1
-+
-   clocks:
-     minItems: 1
-     maxItems: 2
diff --git a/target/linux/bcm4908/patches-5.4/087-v5.18-0001-dt-bindings-pinctrl-Add-binding-for-BCM4908-pinctrl.patch b/target/linux/bcm4908/patches-5.4/087-v5.18-0001-dt-bindings-pinctrl-Add-binding-for-BCM4908-pinctrl.patch
deleted file mode 100644
index ab18c17fd1..0000000000
--- a/target/linux/bcm4908/patches-5.4/087-v5.18-0001-dt-bindings-pinctrl-Add-binding-for-BCM4908-pinctrl.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From 7b5730f0ff24b0d7d1cb660a482384a807618a46 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 24 Jan 2022 11:22:42 +0100
-Subject: [PATCH] dt-bindings: pinctrl: Add binding for BCM4908 pinctrl
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's hardware block that is part of every SoC from BCM4908 family.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20220124102243.14912-1-zajec5@gmail.com
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- .../pinctrl/brcm,bcm4908-pinctrl.yaml         | 72 +++++++++++++++++++
- MAINTAINERS                                   |  7 ++
- 2 files changed, 79 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
-@@ -0,0 +1,72 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm4908-pinctrl.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom BCM4908 pin controller
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+description:
-+  Binding for pin controller present on BCM4908 family SoCs.
-+
-+properties:
-+  compatible:
-+    const: brcm,bcm4908-pinctrl
-+
-+  reg:
-+    maxItems: 1
-+
-+patternProperties:
-+  '-pins$':
-+    type: object
-+    $ref: pinmux-node.yaml#
-+
-+    properties:
-+      function:
-+        enum: [ led_0, led_1, led_2, led_3, led_4, led_5, led_6, led_7, led_8,
-+                led_9, led_10, led_11, led_12, led_13, led_14, led_15, led_16,
-+                led_17, led_18, led_19, led_20, led_21, led_22, led_23, led_24,
-+                led_25, led_26, led_27, led_28, led_29, led_30, led_31,
-+                hs_uart, i2c, i2s, nand_ctrl, nand_data, emmc_ctrl, usb0_pwr,
-+                usb1_pwr ]
-+
-+      groups:
-+        minItems: 1
-+        maxItems: 2
-+        items:
-+          enum: [ led_0_grp_a, led_1_grp_a, led_2_grp_a, led_3_grp_a,
-+                  led_4_grp_a, led_5_grp_a, led_6_grp_a, led_7_grp_a,
-+                  led_8_grp_a, led_9_grp_a, led_10_grp_a, led_10_grp_b,
-+                  led_11_grp_a, led_11_grp_b, led_12_grp_a, led_12_grp_b,
-+                  led_13_grp_a, led_13_grp_b, led_14_grp_a, led_15_grp_a,
-+                  led_16_grp_a, led_17_grp_a, led_18_grp_a, led_19_grp_a,
-+                  led_20_grp_a, led_21_grp_a, led_22_grp_a, led_23_grp_a,
-+                  led_24_grp_a, led_25_grp_a, led_26_grp_a, led_27_grp_a,
-+                  led_28_grp_a, led_29_grp_a, led_30_grp_a, led_31_grp_a,
-+                  led_31_grp_b, hs_uart_grp, i2c_grp_a, i2c_grp_b, i2s_grp,
-+                  nand_ctrl_grp, nand_data_grp, emmc_ctrl_grp, usb0_pwr_grp,
-+                  usb1_pwr_grp ]
-+
-+allOf:
-+  - $ref: pinctrl.yaml#
-+
-+required:
-+  - compatible
-+  - reg
-+
-+unevaluatedProperties: false
-+
-+examples:
-+  - |
-+    pinctrl@ff800560 {
-+        compatible = "brcm,bcm4908-pinctrl";
-+        reg = <0xff800560 0x10>;
-+
-+        led_0-a-pins {
-+            function = "led_0";
-+            groups = "led_0_grp_a";
-+        };
-+    };
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3217,6 +3217,13 @@ F:	Documentation/devicetree/bindings/net
- F:	drivers/net/ethernet/broadcom/bcm4908_enet.*
- F:	drivers/net/ethernet/broadcom/unimac.h
- 
-+BROADCOM BCM4908 PINMUX DRIVER
-+M:	Rafał Miłecki <rafal@milecki.pl>
-+M:	bcm-kernel-feedback-list@broadcom.com
-+L:	linux-gpio@vger.kernel.org
-+S:	Maintained
-+F:	Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
-+
- BROADCOM BCM5301X ARM ARCHITECTURE
- M:	Hauke Mehrtens <hauke@hauke-m.de>
- M:	Rafał Miłecki <zajec5@gmail.com>
diff --git a/target/linux/bcm4908/patches-5.4/087-v5.18-0001-i2c-brcmstb-allow-compiling-on-BCM4908.patch b/target/linux/bcm4908/patches-5.4/087-v5.18-0001-i2c-brcmstb-allow-compiling-on-BCM4908.patch
deleted file mode 100644
index 81952ec857..0000000000
--- a/target/linux/bcm4908/patches-5.4/087-v5.18-0001-i2c-brcmstb-allow-compiling-on-BCM4908.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From d0aee048d648ec2d9aa7af43b127ebf847d497d5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 11 Feb 2022 11:58:06 +0100
-Subject: [PATCH] i2c: brcmstb: allow compiling on BCM4908
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 SoCs use the same I2C hardware block as STB and BCM63xx devices.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Wolfram Sang <wsa@kernel.org>
----
- drivers/i2c/busses/Kconfig | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -472,8 +472,8 @@ config I2C_BCM_KONA
- 
- config I2C_BRCMSTB
- 	tristate "BRCM Settop/DSL I2C controller"
--	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_63XX || \
--		   COMPILE_TEST
-+	depends on ARCH_BCM4908 || ARCH_BCM_63XX || ARCH_BRCMSTB || \
-+		   BMIPS_GENERIC || COMPILE_TEST
- 	default y
- 	help
- 	  If you say yes to this option, support will be included for the
diff --git a/target/linux/bcm4908/patches-5.4/087-v5.18-0002-pinctrl-bcm-add-driver-for-BCM4908-pinmux.patch b/target/linux/bcm4908/patches-5.4/087-v5.18-0002-pinctrl-bcm-add-driver-for-BCM4908-pinmux.patch
deleted file mode 100644
index 670cbee948..0000000000
--- a/target/linux/bcm4908/patches-5.4/087-v5.18-0002-pinctrl-bcm-add-driver-for-BCM4908-pinmux.patch
+++ /dev/null
@@ -1,630 +0,0 @@
-From f7e322d99f1180270fb4a3e1ae992b3116cfcf34 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 24 Jan 2022 11:22:43 +0100
-Subject: [PATCH] pinctrl: bcm: add driver for BCM4908 pinmux
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 has its own pins layout so it needs a custom binding and a Linux
-driver.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
-Link: https://lore.kernel.org/r/20220124102243.14912-2-zajec5@gmail.com
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- MAINTAINERS                           |   1 +
- drivers/pinctrl/bcm/Kconfig           |  14 +
- drivers/pinctrl/bcm/Makefile          |   1 +
- drivers/pinctrl/bcm/pinctrl-bcm4908.c | 563 ++++++++++++++++++++++++++
- 4 files changed, 579 insertions(+)
- create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm4908.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3223,6 +3223,7 @@ M:	bcm-kernel-feedback-list@broadcom.com
- L:	linux-gpio@vger.kernel.org
- S:	Maintained
- F:	Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
-+F:	drivers/pinctrl/bcm/pinctrl-bcm4908.c
- 
- BROADCOM BCM5301X ARM ARCHITECTURE
- M:	Hauke Mehrtens <hauke@hauke-m.de>
---- a/drivers/pinctrl/bcm/Kconfig
-+++ b/drivers/pinctrl/bcm/Kconfig
-@@ -29,6 +29,20 @@ config PINCTRL_BCM2835
- 	help
- 	   Say Y here to enable the Broadcom BCM2835 GPIO driver.
- 
-+config PINCTRL_BCM4908
-+	tristate "Broadcom BCM4908 pinmux driver"
-+	depends on OF && (ARCH_BCM4908 || COMPILE_TEST)
-+	select PINMUX
-+	select PINCONF
-+	select GENERIC_PINCONF
-+	select GENERIC_PINCTRL_GROUPS
-+	select GENERIC_PINMUX_FUNCTIONS
-+	default ARCH_BCM4908
-+	help
-+	  Driver for BCM4908 family SoCs with integrated pin controller.
-+
-+	  If compiled as module it will be called pinctrl-bcm4908.
-+
- config PINCTRL_IPROC_GPIO
- 	bool "Broadcom iProc GPIO (with PINCONF) driver"
- 	depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
---- a/drivers/pinctrl/bcm/Makefile
-+++ b/drivers/pinctrl/bcm/Makefile
-@@ -3,6 +3,7 @@
- 
- obj-$(CONFIG_PINCTRL_BCM281XX)		+= pinctrl-bcm281xx.o
- obj-$(CONFIG_PINCTRL_BCM2835)		+= pinctrl-bcm2835.o
-+obj-$(CONFIG_PINCTRL_BCM4908)		+= pinctrl-bcm4908.o
- obj-$(CONFIG_PINCTRL_IPROC_GPIO)	+= pinctrl-iproc-gpio.o
- obj-$(CONFIG_PINCTRL_CYGNUS_MUX)	+= pinctrl-cygnus-mux.o
- obj-$(CONFIG_PINCTRL_NS)		+= pinctrl-ns.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm/pinctrl-bcm4908.c
-@@ -0,0 +1,561 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/* Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl> */
-+
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/string_helpers.h>
-+
-+#include "../core.h"
-+#include "../pinmux.h"
-+
-+#define BCM4908_NUM_PINS			86
-+
-+#define BCM4908_TEST_PORT_BLOCK_EN_LSB			0x00
-+#define BCM4908_TEST_PORT_BLOCK_DATA_MSB		0x04
-+#define BCM4908_TEST_PORT_BLOCK_DATA_LSB		0x08
-+#define  BCM4908_TEST_PORT_LSB_PINMUX_DATA_SHIFT	12
-+#define BCM4908_TEST_PORT_COMMAND			0x0c
-+#define  BCM4908_TEST_PORT_CMD_LOAD_MUX_REG		0x00000021
-+
-+struct bcm4908_pinctrl {
-+	struct device *dev;
-+	void __iomem *base;
-+	struct mutex mutex;
-+	struct pinctrl_dev *pctldev;
-+	struct pinctrl_desc pctldesc;
-+};
-+
-+/*
-+ * Groups
-+ */
-+
-+struct bcm4908_pinctrl_pin_setup {
-+	unsigned int number;
-+	unsigned int function;
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_0_pins_a[] = {
-+	{ 0, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_1_pins_a[] = {
-+	{ 1, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_2_pins_a[] = {
-+	{ 2, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_3_pins_a[] = {
-+	{ 3, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_4_pins_a[] = {
-+	{ 4, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_5_pins_a[] = {
-+	{ 5, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_6_pins_a[] = {
-+	{ 6, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_7_pins_a[] = {
-+	{ 7, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_8_pins_a[] = {
-+	{ 8, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_9_pins_a[] = {
-+	{ 9, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_10_pins_a[] = {
-+	{ 10, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_11_pins_a[] = {
-+	{ 11, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_12_pins_a[] = {
-+	{ 12, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_13_pins_a[] = {
-+	{ 13, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_14_pins_a[] = {
-+	{ 14, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_15_pins_a[] = {
-+	{ 15, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_16_pins_a[] = {
-+	{ 16, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_17_pins_a[] = {
-+	{ 17, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_18_pins_a[] = {
-+	{ 18, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_19_pins_a[] = {
-+	{ 19, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_20_pins_a[] = {
-+	{ 20, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_21_pins_a[] = {
-+	{ 21, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_22_pins_a[] = {
-+	{ 22, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_23_pins_a[] = {
-+	{ 23, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_24_pins_a[] = {
-+	{ 24, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_25_pins_a[] = {
-+	{ 25, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_26_pins_a[] = {
-+	{ 26, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_27_pins_a[] = {
-+	{ 27, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_28_pins_a[] = {
-+	{ 28, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_29_pins_a[] = {
-+	{ 29, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_30_pins_a[] = {
-+	{ 30, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_31_pins_a[] = {
-+	{ 31, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_10_pins_b[] = {
-+	{ 8, 2 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_11_pins_b[] = {
-+	{ 9, 2 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_12_pins_b[] = {
-+	{ 0, 2 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_13_pins_b[] = {
-+	{ 1, 2 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_31_pins_b[] = {
-+	{ 30, 2 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup hs_uart_pins[] = {
-+	{ 10, 0 },	/* CTS */
-+	{ 11, 0 },	/* RTS */
-+	{ 12, 0 },	/* RXD */
-+	{ 13, 0 },	/* TXD */
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup i2c_pins_a[] = {
-+	{ 18, 0 },	/* SDA */
-+	{ 19, 0 },	/* SCL */
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup i2c_pins_b[] = {
-+	{ 22, 0 },	/* SDA */
-+	{ 23, 0 },	/* SCL */
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup i2s_pins[] = {
-+	{ 27, 0 },	/* MCLK */
-+	{ 28, 0 },	/* LRCK */
-+	{ 29, 0 },	/* SDATA */
-+	{ 30, 0 },	/* SCLK */
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup nand_ctrl_pins[] = {
-+	{ 32, 0 },
-+	{ 33, 0 },
-+	{ 34, 0 },
-+	{ 43, 0 },
-+	{ 44, 0 },
-+	{ 45, 0 },
-+	{ 56, 1 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup nand_data_pins[] = {
-+	{ 35, 0 },
-+	{ 36, 0 },
-+	{ 37, 0 },
-+	{ 38, 0 },
-+	{ 39, 0 },
-+	{ 40, 0 },
-+	{ 41, 0 },
-+	{ 42, 0 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup emmc_ctrl_pins[] = {
-+	{ 46, 0 },
-+	{ 47, 0 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup usb0_pwr_pins[] = {
-+	{ 63, 0 },
-+	{ 64, 0 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup usb1_pwr_pins[] = {
-+	{ 66, 0 },
-+	{ 67, 0 },
-+};
-+
-+struct bcm4908_pinctrl_grp {
-+	const char *name;
-+	const struct bcm4908_pinctrl_pin_setup *pins;
-+	const unsigned int num_pins;
-+};
-+
-+static const struct bcm4908_pinctrl_grp bcm4908_pinctrl_grps[] = {
-+	{ "led_0_grp_a", led_0_pins_a, ARRAY_SIZE(led_0_pins_a) },
-+	{ "led_1_grp_a", led_1_pins_a, ARRAY_SIZE(led_1_pins_a) },
-+	{ "led_2_grp_a", led_2_pins_a, ARRAY_SIZE(led_2_pins_a) },
-+	{ "led_3_grp_a", led_3_pins_a, ARRAY_SIZE(led_3_pins_a) },
-+	{ "led_4_grp_a", led_4_pins_a, ARRAY_SIZE(led_4_pins_a) },
-+	{ "led_5_grp_a", led_5_pins_a, ARRAY_SIZE(led_5_pins_a) },
-+	{ "led_6_grp_a", led_6_pins_a, ARRAY_SIZE(led_6_pins_a) },
-+	{ "led_7_grp_a", led_7_pins_a, ARRAY_SIZE(led_7_pins_a) },
-+	{ "led_8_grp_a", led_8_pins_a, ARRAY_SIZE(led_8_pins_a) },
-+	{ "led_9_grp_a", led_9_pins_a, ARRAY_SIZE(led_9_pins_a) },
-+	{ "led_10_grp_a", led_10_pins_a, ARRAY_SIZE(led_10_pins_a) },
-+	{ "led_11_grp_a", led_11_pins_a, ARRAY_SIZE(led_11_pins_a) },
-+	{ "led_12_grp_a", led_12_pins_a, ARRAY_SIZE(led_12_pins_a) },
-+	{ "led_13_grp_a", led_13_pins_a, ARRAY_SIZE(led_13_pins_a) },
-+	{ "led_14_grp_a", led_14_pins_a, ARRAY_SIZE(led_14_pins_a) },
-+	{ "led_15_grp_a", led_15_pins_a, ARRAY_SIZE(led_15_pins_a) },
-+	{ "led_16_grp_a", led_16_pins_a, ARRAY_SIZE(led_16_pins_a) },
-+	{ "led_17_grp_a", led_17_pins_a, ARRAY_SIZE(led_17_pins_a) },
-+	{ "led_18_grp_a", led_18_pins_a, ARRAY_SIZE(led_18_pins_a) },
-+	{ "led_19_grp_a", led_19_pins_a, ARRAY_SIZE(led_19_pins_a) },
-+	{ "led_20_grp_a", led_20_pins_a, ARRAY_SIZE(led_20_pins_a) },
-+	{ "led_21_grp_a", led_21_pins_a, ARRAY_SIZE(led_21_pins_a) },
-+	{ "led_22_grp_a", led_22_pins_a, ARRAY_SIZE(led_22_pins_a) },
-+	{ "led_23_grp_a", led_23_pins_a, ARRAY_SIZE(led_23_pins_a) },
-+	{ "led_24_grp_a", led_24_pins_a, ARRAY_SIZE(led_24_pins_a) },
-+	{ "led_25_grp_a", led_25_pins_a, ARRAY_SIZE(led_25_pins_a) },
-+	{ "led_26_grp_a", led_26_pins_a, ARRAY_SIZE(led_26_pins_a) },
-+	{ "led_27_grp_a", led_27_pins_a, ARRAY_SIZE(led_27_pins_a) },
-+	{ "led_28_grp_a", led_28_pins_a, ARRAY_SIZE(led_28_pins_a) },
-+	{ "led_29_grp_a", led_29_pins_a, ARRAY_SIZE(led_29_pins_a) },
-+	{ "led_30_grp_a", led_30_pins_a, ARRAY_SIZE(led_30_pins_a) },
-+	{ "led_31_grp_a", led_31_pins_a, ARRAY_SIZE(led_31_pins_a) },
-+	{ "led_10_grp_b", led_10_pins_b, ARRAY_SIZE(led_10_pins_b) },
-+	{ "led_11_grp_b", led_11_pins_b, ARRAY_SIZE(led_11_pins_b) },
-+	{ "led_12_grp_b", led_12_pins_b, ARRAY_SIZE(led_12_pins_b) },
-+	{ "led_13_grp_b", led_13_pins_b, ARRAY_SIZE(led_13_pins_b) },
-+	{ "led_31_grp_b", led_31_pins_b, ARRAY_SIZE(led_31_pins_b) },
-+	{ "hs_uart_grp", hs_uart_pins, ARRAY_SIZE(hs_uart_pins) },
-+	{ "i2c_grp_a", i2c_pins_a, ARRAY_SIZE(i2c_pins_a) },
-+	{ "i2c_grp_b", i2c_pins_b, ARRAY_SIZE(i2c_pins_b) },
-+	{ "i2s_grp", i2s_pins, ARRAY_SIZE(i2s_pins) },
-+	{ "nand_ctrl_grp", nand_ctrl_pins, ARRAY_SIZE(nand_ctrl_pins) },
-+	{ "nand_data_grp", nand_data_pins, ARRAY_SIZE(nand_data_pins) },
-+	{ "emmc_ctrl_grp", emmc_ctrl_pins, ARRAY_SIZE(emmc_ctrl_pins) },
-+	{ "usb0_pwr_grp", usb0_pwr_pins, ARRAY_SIZE(usb0_pwr_pins) },
-+	{ "usb1_pwr_grp", usb1_pwr_pins, ARRAY_SIZE(usb1_pwr_pins) },
-+};
-+
-+/*
-+ * Functions
-+ */
-+
-+struct bcm4908_pinctrl_function {
-+	const char *name;
-+	const char * const *groups;
-+	const unsigned int num_groups;
-+};
-+
-+static const char * const led_0_groups[] = { "led_0_grp_a" };
-+static const char * const led_1_groups[] = { "led_1_grp_a" };
-+static const char * const led_2_groups[] = { "led_2_grp_a" };
-+static const char * const led_3_groups[] = { "led_3_grp_a" };
-+static const char * const led_4_groups[] = { "led_4_grp_a" };
-+static const char * const led_5_groups[] = { "led_5_grp_a" };
-+static const char * const led_6_groups[] = { "led_6_grp_a" };
-+static const char * const led_7_groups[] = { "led_7_grp_a" };
-+static const char * const led_8_groups[] = { "led_8_grp_a" };
-+static const char * const led_9_groups[] = { "led_9_grp_a" };
-+static const char * const led_10_groups[] = { "led_10_grp_a", "led_10_grp_b" };
-+static const char * const led_11_groups[] = { "led_11_grp_a", "led_11_grp_b" };
-+static const char * const led_12_groups[] = { "led_12_grp_a", "led_12_grp_b" };
-+static const char * const led_13_groups[] = { "led_13_grp_a", "led_13_grp_b" };
-+static const char * const led_14_groups[] = { "led_14_grp_a" };
-+static const char * const led_15_groups[] = { "led_15_grp_a" };
-+static const char * const led_16_groups[] = { "led_16_grp_a" };
-+static const char * const led_17_groups[] = { "led_17_grp_a" };
-+static const char * const led_18_groups[] = { "led_18_grp_a" };
-+static const char * const led_19_groups[] = { "led_19_grp_a" };
-+static const char * const led_20_groups[] = { "led_20_grp_a" };
-+static const char * const led_21_groups[] = { "led_21_grp_a" };
-+static const char * const led_22_groups[] = { "led_22_grp_a" };
-+static const char * const led_23_groups[] = { "led_23_grp_a" };
-+static const char * const led_24_groups[] = { "led_24_grp_a" };
-+static const char * const led_25_groups[] = { "led_25_grp_a" };
-+static const char * const led_26_groups[] = { "led_26_grp_a" };
-+static const char * const led_27_groups[] = { "led_27_grp_a" };
-+static const char * const led_28_groups[] = { "led_28_grp_a" };
-+static const char * const led_29_groups[] = { "led_29_grp_a" };
-+static const char * const led_30_groups[] = { "led_30_grp_a" };
-+static const char * const led_31_groups[] = { "led_31_grp_a", "led_31_grp_b" };
-+static const char * const hs_uart_groups[] = { "hs_uart_grp" };
-+static const char * const i2c_groups[] = { "i2c_grp_a", "i2c_grp_b" };
-+static const char * const i2s_groups[] = { "i2s_grp" };
-+static const char * const nand_ctrl_groups[] = { "nand_ctrl_grp" };
-+static const char * const nand_data_groups[] = { "nand_data_grp" };
-+static const char * const emmc_ctrl_groups[] = { "emmc_ctrl_grp" };
-+static const char * const usb0_pwr_groups[] = { "usb0_pwr_grp" };
-+static const char * const usb1_pwr_groups[] = { "usb1_pwr_grp" };
-+
-+static const struct bcm4908_pinctrl_function bcm4908_pinctrl_functions[] = {
-+	{ "led_0", led_0_groups, ARRAY_SIZE(led_0_groups) },
-+	{ "led_1", led_1_groups, ARRAY_SIZE(led_1_groups) },
-+	{ "led_2", led_2_groups, ARRAY_SIZE(led_2_groups) },
-+	{ "led_3", led_3_groups, ARRAY_SIZE(led_3_groups) },
-+	{ "led_4", led_4_groups, ARRAY_SIZE(led_4_groups) },
-+	{ "led_5", led_5_groups, ARRAY_SIZE(led_5_groups) },
-+	{ "led_6", led_6_groups, ARRAY_SIZE(led_6_groups) },
-+	{ "led_7", led_7_groups, ARRAY_SIZE(led_7_groups) },
-+	{ "led_8", led_8_groups, ARRAY_SIZE(led_8_groups) },
-+	{ "led_9", led_9_groups, ARRAY_SIZE(led_9_groups) },
-+	{ "led_10", led_10_groups, ARRAY_SIZE(led_10_groups) },
-+	{ "led_11", led_11_groups, ARRAY_SIZE(led_11_groups) },
-+	{ "led_12", led_12_groups, ARRAY_SIZE(led_12_groups) },
-+	{ "led_13", led_13_groups, ARRAY_SIZE(led_13_groups) },
-+	{ "led_14", led_14_groups, ARRAY_SIZE(led_14_groups) },
-+	{ "led_15", led_15_groups, ARRAY_SIZE(led_15_groups) },
-+	{ "led_16", led_16_groups, ARRAY_SIZE(led_16_groups) },
-+	{ "led_17", led_17_groups, ARRAY_SIZE(led_17_groups) },
-+	{ "led_18", led_18_groups, ARRAY_SIZE(led_18_groups) },
-+	{ "led_19", led_19_groups, ARRAY_SIZE(led_19_groups) },
-+	{ "led_20", led_20_groups, ARRAY_SIZE(led_20_groups) },
-+	{ "led_21", led_21_groups, ARRAY_SIZE(led_21_groups) },
-+	{ "led_22", led_22_groups, ARRAY_SIZE(led_22_groups) },
-+	{ "led_23", led_23_groups, ARRAY_SIZE(led_23_groups) },
-+	{ "led_24", led_24_groups, ARRAY_SIZE(led_24_groups) },
-+	{ "led_25", led_25_groups, ARRAY_SIZE(led_25_groups) },
-+	{ "led_26", led_26_groups, ARRAY_SIZE(led_26_groups) },
-+	{ "led_27", led_27_groups, ARRAY_SIZE(led_27_groups) },
-+	{ "led_28", led_28_groups, ARRAY_SIZE(led_28_groups) },
-+	{ "led_29", led_29_groups, ARRAY_SIZE(led_29_groups) },
-+	{ "led_30", led_30_groups, ARRAY_SIZE(led_30_groups) },
-+	{ "led_31", led_31_groups, ARRAY_SIZE(led_31_groups) },
-+	{ "hs_uart", hs_uart_groups, ARRAY_SIZE(hs_uart_groups) },
-+	{ "i2c", i2c_groups, ARRAY_SIZE(i2c_groups) },
-+	{ "i2s", i2s_groups, ARRAY_SIZE(i2s_groups) },
-+	{ "nand_ctrl", nand_ctrl_groups, ARRAY_SIZE(nand_ctrl_groups) },
-+	{ "nand_data", nand_data_groups, ARRAY_SIZE(nand_data_groups) },
-+	{ "emmc_ctrl", emmc_ctrl_groups, ARRAY_SIZE(emmc_ctrl_groups) },
-+	{ "usb0_pwr", usb0_pwr_groups, ARRAY_SIZE(usb0_pwr_groups) },
-+	{ "usb1_pwr", usb1_pwr_groups, ARRAY_SIZE(usb1_pwr_groups) },
-+};
-+
-+/*
-+ * Groups code
-+ */
-+
-+static const struct pinctrl_ops bcm4908_pinctrl_ops = {
-+	.get_groups_count = pinctrl_generic_get_group_count,
-+	.get_group_name = pinctrl_generic_get_group_name,
-+	.get_group_pins = pinctrl_generic_get_group_pins,
-+	.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
-+	.dt_free_map = pinconf_generic_dt_free_map,
-+};
-+
-+/*
-+ * Functions code
-+ */
-+
-+static int bcm4908_pinctrl_set_mux(struct pinctrl_dev *pctrl_dev,
-+			      unsigned int func_selector,
-+			      unsigned int group_selector)
-+{
-+	struct bcm4908_pinctrl *bcm4908_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+	const struct bcm4908_pinctrl_grp *group;
-+	struct group_desc *group_desc;
-+	int i;
-+
-+	group_desc = pinctrl_generic_get_group(pctrl_dev, group_selector);
-+	if (!group_desc)
-+		return -EINVAL;
-+	group = group_desc->data;
-+
-+	mutex_lock(&bcm4908_pinctrl->mutex);
-+	for (i = 0; i < group->num_pins; i++) {
-+		u32 lsb = 0;
-+
-+		lsb |= group->pins[i].number;
-+		lsb |= group->pins[i].function << BCM4908_TEST_PORT_LSB_PINMUX_DATA_SHIFT;
-+
-+		writel(0x0, bcm4908_pinctrl->base + BCM4908_TEST_PORT_BLOCK_DATA_MSB);
-+		writel(lsb, bcm4908_pinctrl->base + BCM4908_TEST_PORT_BLOCK_DATA_LSB);
-+		writel(BCM4908_TEST_PORT_CMD_LOAD_MUX_REG,
-+		       bcm4908_pinctrl->base + BCM4908_TEST_PORT_COMMAND);
-+	}
-+	mutex_unlock(&bcm4908_pinctrl->mutex);
-+
-+	return 0;
-+}
-+
-+static const struct pinmux_ops bcm4908_pinctrl_pmxops = {
-+	.get_functions_count = pinmux_generic_get_function_count,
-+	.get_function_name = pinmux_generic_get_function_name,
-+	.get_function_groups = pinmux_generic_get_function_groups,
-+	.set_mux = bcm4908_pinctrl_set_mux,
-+};
-+
-+/*
-+ * Controller code
-+ */
-+
-+static struct pinctrl_desc bcm4908_pinctrl_desc = {
-+	.name = "bcm4908-pinctrl",
-+	.pctlops = &bcm4908_pinctrl_ops,
-+	.pmxops = &bcm4908_pinctrl_pmxops,
-+};
-+
-+static const struct of_device_id bcm4908_pinctrl_of_match_table[] = {
-+	{ .compatible = "brcm,bcm4908-pinctrl", },
-+	{ }
-+};
-+
-+static int bcm4908_pinctrl_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct bcm4908_pinctrl *bcm4908_pinctrl;
-+	struct pinctrl_desc *pctldesc;
-+	struct pinctrl_pin_desc *pins;
-+	int i;
-+
-+	bcm4908_pinctrl = devm_kzalloc(dev, sizeof(*bcm4908_pinctrl), GFP_KERNEL);
-+	if (!bcm4908_pinctrl)
-+		return -ENOMEM;
-+	pctldesc = &bcm4908_pinctrl->pctldesc;
-+	platform_set_drvdata(pdev, bcm4908_pinctrl);
-+
-+	/* Set basic properties */
-+
-+	bcm4908_pinctrl->dev = dev;
-+
-+	bcm4908_pinctrl->base = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(bcm4908_pinctrl->base))
-+		return PTR_ERR(bcm4908_pinctrl->base);
-+
-+	mutex_init(&bcm4908_pinctrl->mutex);
-+
-+	memcpy(pctldesc, &bcm4908_pinctrl_desc, sizeof(*pctldesc));
-+
-+	/* Set pinctrl properties */
-+
-+	pins = devm_kcalloc(dev, BCM4908_NUM_PINS, sizeof(*pins), GFP_KERNEL);
-+	if (!pins)
-+		return -ENOMEM;
-+	for (i = 0; i < BCM4908_NUM_PINS; i++) {
-+		pins[i].number = i;
-+		pins[i].name = devm_kasprintf(dev, GFP_KERNEL, "pin-%d", i);
-+		if (!pins[i].name)
-+			return -ENOMEM;
-+	}
-+	pctldesc->pins = pins;
-+	pctldesc->npins = BCM4908_NUM_PINS;
-+
-+	/* Register */
-+
-+	bcm4908_pinctrl->pctldev = devm_pinctrl_register(dev, pctldesc, bcm4908_pinctrl);
-+	if (IS_ERR(bcm4908_pinctrl->pctldev)) {
-+		dev_err(dev, "Failed to register pinctrl\n");
-+		return PTR_ERR(bcm4908_pinctrl->pctldev);
-+	}
-+
-+	/* Groups */
-+
-+	for (i = 0; i < ARRAY_SIZE(bcm4908_pinctrl_grps); i++) {
-+		const struct bcm4908_pinctrl_grp *group = &bcm4908_pinctrl_grps[i];
-+		int *pins;
-+		int j;
-+
-+		pins = devm_kcalloc(dev, group->num_pins, sizeof(*pins), GFP_KERNEL);
-+		if (!pins)
-+			return -ENOMEM;
-+		for (j = 0; j < group->num_pins; j++)
-+			pins[j] = group->pins[j].number;
-+
-+		pinctrl_generic_add_group(bcm4908_pinctrl->pctldev, group->name,
-+					  pins, group->num_pins, (void *)group);
-+	}
-+
-+	/* Functions */
-+
-+	for (i = 0; i < ARRAY_SIZE(bcm4908_pinctrl_functions); i++) {
-+		const struct bcm4908_pinctrl_function *function = &bcm4908_pinctrl_functions[i];
-+
-+		pinmux_generic_add_function(bcm4908_pinctrl->pctldev,
-+					    function->name,
-+					    function->groups,
-+					    function->num_groups, NULL);
-+	}
-+
-+	return 0;
-+}
-+
-+static struct platform_driver bcm4908_pinctrl_driver = {
-+	.probe = bcm4908_pinctrl_probe,
-+	.driver = {
-+		.name = "bcm4908-pinctrl",
-+		.of_match_table = bcm4908_pinctrl_of_match_table,
-+	},
-+};
-+
-+module_platform_driver(bcm4908_pinctrl_driver);
-+
-+MODULE_AUTHOR("Rafał Miłecki");
-+MODULE_LICENSE("GPL v2");
-+MODULE_DEVICE_TABLE(of, bcm4908_pinctrl_of_match_table);
diff --git a/target/linux/bcm4908/patches-5.4/088-v5.18-phy-phy-brcm-usb-fixup-BCM4908-support.patch b/target/linux/bcm4908/patches-5.4/088-v5.18-phy-phy-brcm-usb-fixup-BCM4908-support.patch
deleted file mode 100644
index a9568bcbba..0000000000
--- a/target/linux/bcm4908/patches-5.4/088-v5.18-phy-phy-brcm-usb-fixup-BCM4908-support.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-From 32942d33d63d27714ed16a4176e5a99547adb6e0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 18 Feb 2022 18:24:59 +0100
-Subject: [PATCH] phy: phy-brcm-usb: fixup BCM4908 support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Just like every other family BCM4908 should get its own enum value. That
-is required to properly handle it in chipset conditional code.
-
-The real change is excluding BCM4908 from the PLL reprogramming code
-(see brcmusb_usb3_pll_54mhz()). I'm not sure what's the BCM4908
-reference clock frequency but:
-1. BCM4908 custom driver from Broadcom's SDK doesn't reprogram PLL
-2. Doing that in Linux driver stopped PHY handling some USB 3.0 devices
-
-This change makes USB 3.0 PHY recognize e.g.:
-1. 04e8:6860 - Samsung Electronics Co., Ltd Galaxy series, misc. (MTP mode)
-2. 1058:259f - Western Digital My Passport 259F
-
-Broadcom's STB SoCs come with a set of SUN_TOP_CTRL_* registers that
-allow reading chip family and product ids. Such a block & register is
-missing on BCM4908 so this commit introduces "compatible" string
-specific binding.
-
-Fixes: 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20220218172459.10431-1-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/phy/broadcom/phy-brcm-usb-init.c | 36 ++++++++++++++++++++++++
- drivers/phy/broadcom/phy-brcm-usb-init.h |  1 +
- drivers/phy/broadcom/phy-brcm-usb.c      | 11 +++++++-
- 3 files changed, 47 insertions(+), 1 deletion(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb-init.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
-@@ -79,6 +79,7 @@
- 
- enum brcm_family_type {
- 	BRCM_FAMILY_3390A0,
-+	BRCM_FAMILY_4908,
- 	BRCM_FAMILY_7250B0,
- 	BRCM_FAMILY_7271A0,
- 	BRCM_FAMILY_7364A0,
-@@ -96,6 +97,7 @@ enum brcm_family_type {
- 
- static const char *family_names[BRCM_FAMILY_COUNT] = {
- 	USB_BRCM_FAMILY(3390A0),
-+	USB_BRCM_FAMILY(4908),
- 	USB_BRCM_FAMILY(7250B0),
- 	USB_BRCM_FAMILY(7271A0),
- 	USB_BRCM_FAMILY(7364A0),
-@@ -203,6 +205,27 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT
- 		USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
- 		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
- 	},
-+	/* 4908 */
-+	[BRCM_FAMILY_4908] = {
-+		0, /* USB_CTRL_SETUP_SCB1_EN_MASK */
-+		0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
-+		0, /* USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK */
-+		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
-+		0, /* USB_CTRL_SETUP_OC3_DISABLE_MASK */
-+		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
-+		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
-+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
-+		USB_CTRL_USB_PM_USB_PWRDN_MASK,
-+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
-+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
-+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
-+		0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
-+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
-+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
-+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
-+		0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK */
-+		0, /* USB_CTRL_SETUP ENDIAN bits */
-+	},
- 	/* 7250b0 */
- 	[BRCM_FAMILY_7250B0] = {
- 		USB_CTRL_SETUP_SCB1_EN_MASK,
-@@ -559,6 +582,7 @@ static void brcmusb_usb3_pll_54mhz(struc
- 	 */
- 	switch (params->selected_family) {
- 	case BRCM_FAMILY_3390A0:
-+	case BRCM_FAMILY_4908:
- 	case BRCM_FAMILY_7250B0:
- 	case BRCM_FAMILY_7366C0:
- 	case BRCM_FAMILY_74371A0:
-@@ -1004,6 +1028,18 @@ static const struct brcm_usb_init_ops bc
- 	.set_dual_select = usb_set_dual_select,
- };
- 
-+void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params)
-+{
-+	int fam;
-+
-+	fam = BRCM_FAMILY_4908;
-+	params->selected_family = fam;
-+	params->usb_reg_bits_map =
-+		&usb_reg_bits_map_table[fam][0];
-+	params->family_name = family_names[fam];
-+	params->ops = &bcm7445_ops;
-+}
-+
- void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params)
- {
- 	int fam;
---- a/drivers/phy/broadcom/phy-brcm-usb-init.h
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
-@@ -64,6 +64,7 @@ struct  brcm_usb_init_params {
- 	bool suspend_with_clocks;
- };
- 
-+void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params);
- void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params);
- void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params);
- void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params);
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -253,6 +253,15 @@ static const struct attribute_group brcm
- 	.attrs = brcm_usb_phy_attrs,
- };
- 
-+static const struct match_chip_info chip_info_4908 = {
-+	.init_func = &brcm_usb_dvr_init_4908,
-+	.required_regs = {
-+		BRCM_REGS_CTRL,
-+		BRCM_REGS_XHCI_EC,
-+		-1,
-+	},
-+};
-+
- static const struct match_chip_info chip_info_7216 = {
- 	.init_func = &brcm_usb_dvr_init_7216,
- 	.required_regs = {
-@@ -288,7 +297,7 @@ static const struct match_chip_info chip
- static const struct of_device_id brcm_usb_dt_ids[] = {
- 	{
- 		.compatible = "brcm,bcm4908-usb-phy",
--		.data = &chip_info_7445,
-+		.data = &chip_info_4908,
- 	},
- 	{
- 		.compatible = "brcm,bcm7216-usb-phy",
diff --git a/target/linux/bcm4908/patches-5.4/170-net-broadcom-bcm4908_enet-reset-DMA-rings-sw-indexes.patch b/target/linux/bcm4908/patches-5.4/170-net-broadcom-bcm4908_enet-reset-DMA-rings-sw-indexes.patch
deleted file mode 100644
index 7e82230f9a..0000000000
--- a/target/linux/bcm4908/patches-5.4/170-net-broadcom-bcm4908_enet-reset-DMA-rings-sw-indexes.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 22 Jun 2021 07:05:04 +0200
-Subject: [PATCH] net: broadcom: bcm4908_enet: reset DMA rings sw indexes
- properly
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Resetting software indexes in bcm4908_dma_alloc_buf_descs() is not
-enough as it's called during device probe only. Driver resets DMA on
-every .ndo_open callback and it's required to reset indexes then.
-
-This fixes inconsistent rings state and stalled traffic after interface
-down & up sequence.
-
-Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -174,9 +174,6 @@ static int bcm4908_dma_alloc_buf_descs(s
- 	if (!ring->slots)
- 		goto err_free_buf_descs;
- 
--	ring->read_idx = 0;
--	ring->write_idx = 0;
--
- 	return 0;
- 
- err_free_buf_descs:
-@@ -303,6 +300,9 @@ static void bcm4908_enet_dma_ring_init(s
- 
- 	enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR,
- 		   (uint32_t)ring->dma_addr);
-+
-+	ring->read_idx = 0;
-+	ring->write_idx = 0;
- }
- 
- static void bcm4908_enet_dma_uninit(struct bcm4908_enet *enet)
diff --git a/target/linux/bcm4908/patches-5.4/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch b/target/linux/bcm4908/patches-5.4/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch
deleted file mode 100644
index 6f4ae30108..0000000000
--- a/target/linux/bcm4908/patches-5.4/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 15 Feb 2022 08:27:35 +0100
-Subject: [PATCH] i2c: brcmstb: fix support for DSL and CM variants
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-DSL and CM (Cable Modem) support 8 B max transfer size and have a custom
-DT binding for that reason. This driver was checking for a wrong
-"compatible" however which resulted in an incorrect setup.
-
-Fixes: e2e5a2c61837 ("i2c: brcmstb: Adding support for CM and DSL SoCs")
-Cc: Kamal Dasu <kdasu.kdev@gmail.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
----
- drivers/i2c/busses/i2c-brcmstb.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/i2c/busses/i2c-brcmstb.c
-+++ b/drivers/i2c/busses/i2c-brcmstb.c
-@@ -640,7 +640,7 @@ static int brcmstb_i2c_probe(struct plat
- 
- 	/* set the data in/out register size for compatible SoCs */
- 	if (of_device_is_compatible(dev->device->of_node,
--				    "brcmstb,brcmper-i2c"))
-+				    "brcm,brcmper-i2c"))
- 		dev->data_regsz = sizeof(u8);
- 	else
- 		dev->data_regsz = sizeof(u32);
diff --git a/target/linux/bcm4908/patches-5.4/181-watchdog-allow-building-BCM7038_WDT-for-BCM4908.patch b/target/linux/bcm4908/patches-5.4/181-watchdog-allow-building-BCM7038_WDT-for-BCM4908.patch
deleted file mode 100644
index a42fb7d611..0000000000
--- a/target/linux/bcm4908/patches-5.4/181-watchdog-allow-building-BCM7038_WDT-for-BCM4908.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 9 Feb 2022 21:32:02 +0100
-Subject: [PATCH] watchdog: allow building BCM7038_WDT for BCM4908
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 is a SoCs family that shares a lot of hardware with BCM63xx
-including the watchdog block. Allow building this driver for it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
----
- drivers/watchdog/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1759,7 +1759,7 @@ config BCM7038_WDT
- 	tristate "BCM7038 Watchdog"
- 	select WATCHDOG_CORE
- 	depends on HAS_IOMEM
--	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
-+	depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
- 	help
- 	 Watchdog driver for the built-in hardware in Broadcom 7038 and
- 	 later SoCs used in set-top boxes.  BCM7038 was made public
diff --git a/target/linux/bcm4908/patches-5.4/182-watchdog-bcm7038_wdt-Support-BCM6345-compatible-stri.patch b/target/linux/bcm4908/patches-5.4/182-watchdog-bcm7038_wdt-Support-BCM6345-compatible-stri.patch
deleted file mode 100644
index 6a6f7e4299..0000000000
--- a/target/linux/bcm4908/patches-5.4/182-watchdog-bcm7038_wdt-Support-BCM6345-compatible-stri.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 16 Feb 2022 07:28:34 +0100
-Subject: [PATCH] watchdog: bcm7038_wdt: Support BCM6345 compatible string
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-A new "compatible" value has been added in the commit 17fffe91ba36
-("dt-bindings: watchdog: Add BCM6345 compatible to BCM7038 binding").
-It's meant to be used for BCM63xx SoCs family but hardware block can be
-programmed just like the 7038 one.
-
-Cc: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/watchdog/bcm7038_wdt.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/watchdog/bcm7038_wdt.c
-+++ b/drivers/watchdog/bcm7038_wdt.c
-@@ -193,6 +193,7 @@ static SIMPLE_DEV_PM_OPS(bcm7038_wdt_pm_
- 			 bcm7038_wdt_resume);
- 
- static const struct of_device_id bcm7038_wdt_match[] = {
-+	{ .compatible = "brcm,bcm6345-wdt" },
- 	{ .compatible = "brcm,bcm7038-wdt" },
- 	{},
- };
diff --git a/target/linux/bcm4908/patches-5.4/300-arm64-dts-broadcom-bcm4908-limit-amount-of-GPIOs.patch b/target/linux/bcm4908/patches-5.4/300-arm64-dts-broadcom-bcm4908-limit-amount-of-GPIOs.patch
deleted file mode 100644
index 5d924d68c6..0000000000
--- a/target/linux/bcm4908/patches-5.4/300-arm64-dts-broadcom-bcm4908-limit-amount-of-GPIOs.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Feb 2021 22:01:03 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: limit amount of GPIOs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Linux driver can't handle more than 64 GPIOs
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -290,7 +290,7 @@
- 		gpio0: gpio-controller@500 {
- 			compatible = "brcm,bcm6345-gpio";
- 			reg-names = "dirout", "dat";
--			reg = <0x500 0x28>, <0x528 0x28>;
-+			reg = <0x500 0x8>, <0x528 0x8>;
- 
- 			#gpio-cells = <2>;
- 			gpio-controller;
diff --git a/target/linux/bcm4908/patches-5.4/400-mtd-rawnand-brcmnand-disable-WP-on-BCM4908.patch b/target/linux/bcm4908/patches-5.4/400-mtd-rawnand-brcmnand-disable-WP-on-BCM4908.patch
deleted file mode 100644
index 65066236db..0000000000
--- a/target/linux/bcm4908/patches-5.4/400-mtd-rawnand-brcmnand-disable-WP-on-BCM4908.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 21 Jan 2021 10:44:53 +0100
-Subject: [PATCH] mtd: rawnand: brcmnand: disable WP on BCM4908
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 contains NAND controller version 0x0701 (v7.1). It means that
-NAND_WP should be available.
-
-For some reason setting #WP on doesn't result in clearing NAND_STATUS_WP
-status bit:
-[    1.077857] bcm63138_nand ff801800.nand: timeout on status poll (expected c0000040 got c00000c0)
-[    1.086832] bcm63138_nand ff801800.nand: nand #WP expected on
-
-For now try working without touching #WP.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -38,7 +38,11 @@
-  * 1: NAND_WP is set by default, cleared for erase/write operations
-  * 2: NAND_WP is always cleared
-  */
-+#if IS_ENABLED(CONFIG_ARCH_BCM4908)
-+static int wp_on = 0;
-+#else
- static int wp_on = 1;
-+#endif
- module_param(wp_on, int, 0444);
- 
- /***********************************************************************
diff --git a/target/linux/bcm4908/patches-5.4/401-mtd-support-BLKRRPART.patch b/target/linux/bcm4908/patches-5.4/401-mtd-support-BLKRRPART.patch
deleted file mode 100644
index 70a1896328..0000000000
--- a/target/linux/bcm4908/patches-5.4/401-mtd-support-BLKRRPART.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 22 Mar 2021 07:15:17 +0100
-Subject: [PATCH] mtd: support BLKRRPART
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Rescan MTD subpartitions on request.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/mtd/mtdchar.c
-+++ b/drivers/mtd/mtdchar.c
-@@ -1015,8 +1015,11 @@ static int mtdchar_ioctl(struct file *fi
- 
- 	case BLKRRPART:
- 	{
--		/* No reread partition feature. Just return ok */
--		ret = 0;
-+		int nr_parts;
-+
-+		del_mtd_partitions(mtd);
-+		nr_parts = parse_mtd_partitions(mtd, NULL, NULL);
-+		ret = nr_parts < 0 ? nr_parts : 0;
- 		break;
- 	}
- 	}
diff --git a/target/linux/bcm4908/patches-5.4/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch b/target/linux/bcm4908/patches-5.4/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch
deleted file mode 100644
index d9d972c9cd..0000000000
--- a/target/linux/bcm4908/patches-5.4/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Feb 2021 23:59:26 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: enable GPHY for switch probing
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-GPHY needs to be enabled to succesfully probe & setup switch port
-connected to it. Otherwise hardcoding PHY OUI would be required.
-
-Before:
-brcm-sf2 80080000.switch lan4 (uninitialized): PHY [800c05c0.mdio--1:08] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan3 (uninitialized): PHY [800c05c0.mdio--1:09] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan2 (uninitialized): PHY [800c05c0.mdio--1:0a] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan1 (uninitialized): PHY [800c05c0.mdio--1:0b] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch wan (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 7
-
-After:
-brcm-sf2 80080000.switch lan4 (uninitialized): PHY [800c05c0.mdio--1:08] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan3 (uninitialized): PHY [800c05c0.mdio--1:09] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan2 (uninitialized): PHY [800c05c0.mdio--1:0a] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan1 (uninitialized): PHY [800c05c0.mdio--1:0b] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch wan (uninitialized): PHY [800c05c0.mdio--1:0c] driver [Generic PHY] (irq=POLL)
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/net/dsa/bcm_sf2.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1363,10 +1363,14 @@ static int bcm_sf2_sw_probe(struct platf
- 	rev = reg_readl(priv, REG_PHY_REVISION);
- 	priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
- 
-+	bcm_sf2_gphy_enable_set(priv->dev->ds, true);
-+
- 	ret = b53_switch_register(dev);
- 	if (ret)
- 		goto out_mdio;
- 
-+	bcm_sf2_gphy_enable_set(priv->dev->ds, false);
-+
- 	dev_info(&pdev->dev,
- 		 "Starfighter 2 top: %x.%02x, core: %x.%02x, IRQs: %d, %d\n",
- 		 priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff,
diff --git a/target/linux/bcm4908/patches-5.4/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch b/target/linux/bcm4908/patches-5.4/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch
deleted file mode 100644
index c8fe1121ba..0000000000
--- a/target/linux/bcm4908/patches-5.4/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 16 Feb 2021 00:06:35 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: keep GPHY enabled on the BCM4908
-
-Trying to access disabled PHY results in MDIO_READ_FAIL and:
-[   11.962886] brcm-sf2 80080000.switch wan: configuring for phy/internal link mode
-[   11.972500] 8021q: adding VLAN 0 to HW filter on device wan
-[   11.980205] ------------[ cut here ]------------
-[   11.984885] WARNING: CPU: 0 PID: 7 at phy_error+0x10/0x58
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/net/dsa/bcm_sf2.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1377,6 +1377,12 @@ static int bcm_sf2_sw_probe(struct platf
- 		 priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
- 		 priv->irq0, priv->irq1);
- 
-+	/* BCM4908 has 5 GPHYs which means bcm_sf2_port_setup() will not enable
-+	 * GPHY when needed. Leave it enabled here.
-+	 */
-+	if (priv->type == BCM4908_DEVICE_ID)
-+		bcm_sf2_gphy_enable_set(priv->dev->ds, true);
-+
- 	return 0;
- 
- out_mdio:
diff --git a/target/linux/bcm53xx/config-5.4 b/target/linux/bcm53xx/config-5.4
deleted file mode 100644
index 46f9d36f8f..0000000000
--- a/target/linux/bcm53xx/config-5.4
+++ /dev/null
@@ -1,367 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_5301X=y
-CONFIG_ARCH_BCM_53573=y
-# CONFIG_ARCH_BCM_HR2 is not set
-CONFIG_ARCH_BCM_IPROC=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_BINFMT_FLAT=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_KEEPINITRD=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_DRIVER_PCI=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_SFLASH=y
-# CONFIG_BCM_CYGNUS_PHY is not set
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BCM_NS_THERMAL=y
-CONFIG_BCM_SR_THERMAL=y
-CONFIG_BGMAC=y
-CONFIG_BGMAC_BCMA=y
-# CONFIG_BGMAC_PLATFORM is not set
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CC_HAS_KASAN_GENERIC=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-# CONFIG_CLK_BCM_NS2 is not set
-CONFIG_CLK_BCM_NSP=y
-# CONFIG_CLK_BCM_SR is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_IPROC=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BCM_5301X=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MISC=y
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=0
-CONFIG_DEBUG_UART_PHYS=0x18000300
-CONFIG_DEBUG_UART_VIRT=0xf1000300
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DMA_REMAP=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXTCON=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PCI=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_BCM2835=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IO_URING=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BCM_IPROC=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_BUS_MUX=y
-# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_NAND_BRCMNAND=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_OF_PARTS_LINKSYS_NS=y
-CONFIG_MTD_PARSER_TRX=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NR_CPUS=2
-CONFIG_NVMEM=y
-CONFIG_NVMEM_BRCM_NVRAM=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIE_IPROC=y
-CONFIG_PCIE_IPROC_BCMA=y
-# CONFIG_PCIE_IPROC_PLATFORM is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_BCM_NS_USB2 is not set
-# CONFIG_PHY_BCM_NS_USB3 is not set
-# CONFIG_PHY_BCM_SR_PCIE is not set
-CONFIG_PHY_BCM_SR_USB=y
-# CONFIG_PHY_BRCM_SATA is not set
-# CONFIG_PHY_NS2_USB_DRD is not set
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_IPROC_GPIO is not set
-CONFIG_PINCTRL_NS=y
-# CONFIG_PINCTRL_NS2_MUX is not set
-CONFIG_PWM=y
-CONFIG_PWM_BCM_IPROC=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM_QSPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-CONFIG_SWCONFIG_B53_SRAB_DRIVER=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-# CONFIG_VFP is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/bcm53xx/patches-5.4/030-v5.5-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWC-2000.patch b/target/linux/bcm53xx/patches-5.4/030-v5.5-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWC-2000.patch
deleted file mode 100644
index 67e85da61f..0000000000
--- a/target/linux/bcm53xx/patches-5.4/030-v5.5-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWC-2000.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 984829e2d39b5ba9f817198d701c85511ef40528 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dan.haab@legrand.com>
-Date: Wed, 2 Oct 2019 09:57:26 -0600
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWC-2000
-
-It's a simple network device based on BCM47094 with just a single
-Ethernet port.
-
-Signed-off-by: Dan Haab <dan.haab@legrand.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile                    |  1 +
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 53 +++++++++++++++++++
- 2 files changed, 54 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -113,6 +113,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm47094-luxul-abr-4500.dtb \
- 	bcm47094-luxul-xap-1610.dtb \
- 	bcm47094-luxul-xbr-4500.dtb \
-+	bcm47094-luxul-xwc-2000.dtb \
- 	bcm47094-luxul-xwr-3100.dtb \
- 	bcm47094-luxul-xwr-3150-v1.dtb \
- 	bcm47094-netgear-r8500.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -0,0 +1,53 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright 2019 Legrand AV Inc.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+	compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
-+	model = "Luxul XWC-2000 V1";
-+
-+	chosen {
-+		bootargs = "earlycon";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x18000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		status	{
-+			label = "bcm53xx:green:status";
-+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "timer";
-+		};
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&uart1 {
-+	status = "okay";
-+};
-+
-+&spi_nor {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-5.4/031-v5.8-ARM-dts-BCM5301X-Add-missing-memory-device_type-for-.patch b/target/linux/bcm53xx/patches-5.4/031-v5.8-ARM-dts-BCM5301X-Add-missing-memory-device_type-for-.patch
deleted file mode 100644
index 43a719a7a8..0000000000
--- a/target/linux/bcm53xx/patches-5.4/031-v5.8-ARM-dts-BCM5301X-Add-missing-memory-device_type-for-.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From de1f6d9304c38e414552c3565d36286609ced0c1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 8 Jun 2020 18:33:41 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Add missing memory "device_type" for
- Luxul XWC-2000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This property is needed since commit abe60a3a7afb ("ARM: dts: Kill off
-skeleton{64}.dtsi"). Without it booting silently hangs at:
-[    0.000000] Memory policy: Data cache writealloc
-
-Fixes: 984829e2d39b ("ARM: dts: BCM5301X: Add DT for Luxul XWC-2000")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -17,6 +17,7 @@
- 	};
- 
- 	memory {
-+		device_type = "memory";
- 		reg = <0x00000000 0x08000000
- 		       0x88000000 0x18000000>;
- 	};
diff --git a/target/linux/bcm53xx/patches-5.4/032-v5.9-ARM-dts-BCM5301X-Specify-switch-ports-for-Luxul-devi.patch b/target/linux/bcm53xx/patches-5.4/032-v5.9-ARM-dts-BCM5301X-Specify-switch-ports-for-Luxul-devi.patch
deleted file mode 100644
index a2f05d3d9f..0000000000
--- a/target/linux/bcm53xx/patches-5.4/032-v5.9-ARM-dts-BCM5301X-Specify-switch-ports-for-Luxul-devi.patch
+++ /dev/null
@@ -1,301 +0,0 @@
-From 99e5a32902d9e144568add5dd8791aa66a69f0bf Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 8 Jun 2020 11:37:33 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify switch ports for Luxul devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-All those devices use standard BCM53011 (rev 5) or BCM53012 (rev 0).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts  | 25 ++++++++++++
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts  | 20 ++++++++++
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 20 ++++++++++
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 40 +++++++++++++++++++
- arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 25 ++++++++++++
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 20 ++++++++++
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 40 +++++++++++++++++++
- .../boot/dts/bcm47094-luxul-xwr-3150-v1.dts   | 40 +++++++++++++++++++
- 8 files changed, 230 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -60,3 +60,28 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		port@0 {
-+			reg = <0>;
-+			label = "poe";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "lan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -67,3 +67,23 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "lan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -60,3 +60,23 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "poe";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -108,3 +108,43 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		port@0 {
-+			reg = <0>;
-+			label = "lan4";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan3";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan1";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -54,3 +54,28 @@
- &spi_nor {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		port@0 {
-+			reg = <0>;
-+			label = "poe";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -52,3 +52,23 @@
- &spi_nor {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		port@0 {
-+			reg = <0>;
-+			label = "lan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -103,3 +103,43 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		port@0 {
-+			reg = <0>;
-+			label = "lan4";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan3";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan1";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -74,3 +74,43 @@
- &spi_nor {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		port@0 {
-+			reg = <0>;
-+			label = "lan4";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan3";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan1";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-5.4/033-v5.10-0001-ARM-dts-BCM5301X-Specify-PWM-in-the-DT.patch b/target/linux/bcm53xx/patches-5.4/033-v5.10-0001-ARM-dts-BCM5301X-Specify-PWM-in-the-DT.patch
deleted file mode 100644
index 760418a086..0000000000
--- a/target/linux/bcm53xx/patches-5.4/033-v5.10-0001-ARM-dts-BCM5301X-Specify-PWM-in-the-DT.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 0ea4b29d149586667d96767f1fc8e57ee942c1b0 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 22 Aug 2020 18:19:19 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify PWM in the DT
-
-The BCM53016 in the Meraki MR32 uses the on-chip PWM
-controller to drive a tri-color RGB LED. Since I plan
-to use the PWM, I made a label for the pwm's pinmux
-node. This way, it can be easily referenced.... And
-Also included a label for the i2c since I'm going to
-need it in the future too.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Acked-by: Scott Branden <scott.branden@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -352,6 +352,14 @@
- 		};
- 	};
- 
-+	pwm: pwm@18002000 {
-+		compatible = "brcm,iproc-pwm";
-+		reg = <0x18002000 0x28>;
-+		clocks = <&osc>;
-+		#pwm-cells = <3>;
-+		status = "disabled";
-+	};
-+
- 	mdio: mdio@18003000 {
- 		compatible = "brcm,iproc-mdio";
- 		reg = <0x18003000 0x8>;
-@@ -419,12 +427,12 @@
- 					function = "spi";
- 				};
- 
--				i2c {
-+				pinmux_i2c: i2c {
- 					groups = "i2c_grp";
- 					function = "i2c";
- 				};
- 
--				pwm {
-+				pinmux_pwm: pwm {
- 					groups = "pwm0_grp", "pwm1_grp",
- 						 "pwm2_grp", "pwm3_grp";
- 					function = "pwm";
diff --git a/target/linux/bcm53xx/patches-5.4/033-v5.10-0002-ARM-dts-BCM5301X-Specify-uart2-in-the-DT.patch b/target/linux/bcm53xx/patches-5.4/033-v5.10-0002-ARM-dts-BCM5301X-Specify-uart2-in-the-DT.patch
deleted file mode 100644
index 629e4bac24..0000000000
--- a/target/linux/bcm53xx/patches-5.4/033-v5.10-0002-ARM-dts-BCM5301X-Specify-uart2-in-the-DT.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 5e396bb05b89e23e98e6d75749b77502e68210a4 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 22 Aug 2020 18:19:20 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify uart2 in the DT
-
-The BCM53016 in the Meraki MR32 utilizes the third "uart2"
-to connect to a on-board Bluetooth-LE 4.0 BCM20732 chip.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Reviewed-by: Scott Branden <scott.branden@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -394,6 +394,15 @@
- 		reg = <0x18105000 0x1000>;
- 	};
- 
-+	uart2: serial@18008000 {
-+		compatible = "ns16550a";
-+		reg = <0x18008000 0x20>;
-+		clocks = <&iprocslow>;
-+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+		reg-shift = <2>;
-+		status = "disabled";
-+	};
-+
- 	i2c0: i2c@18009000 {
- 		compatible = "brcm,iproc-i2c";
- 		reg = <0x18009000 0x50>;
diff --git a/target/linux/bcm53xx/patches-5.4/033-v5.10-0003-ARM-dts-BCM5301X-Specify-pcie2-in-the-DT.patch b/target/linux/bcm53xx/patches-5.4/033-v5.10-0003-ARM-dts-BCM5301X-Specify-pcie2-in-the-DT.patch
deleted file mode 100644
index 07b173702e..0000000000
--- a/target/linux/bcm53xx/patches-5.4/033-v5.10-0003-ARM-dts-BCM5301X-Specify-pcie2-in-the-DT.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From c4cd6fcae46fd14aed8665b7cf66d0954765a873 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 22 Aug 2020 18:19:21 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify pcie2 in the DT
-
-The SoC supports three pcie ports. Currently, only
-pcie0 and pcie1 are enabled. This patch adds the
-pcie2 port as well.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Reviewed-by: Scott Branden <scott.branden@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -254,6 +254,10 @@
- 			reg = <0x00013000 0x1000>;
- 		};
- 
-+		pcie2: pcie@14000 {
-+			reg = <0x00014000 0x1000>;
-+		};
-+
- 		usb2: usb2@21000 {
- 			reg = <0x00021000 0x1000>;
- 
diff --git a/target/linux/bcm53xx/patches-5.4/033-v5.10-0004-ARM-BCM5301X-Add-DT-for-Meraki-MR32.patch b/target/linux/bcm53xx/patches-5.4/033-v5.10-0004-ARM-BCM5301X-Add-DT-for-Meraki-MR32.patch
deleted file mode 100644
index e96815ba38..0000000000
--- a/target/linux/bcm53xx/patches-5.4/033-v5.10-0004-ARM-BCM5301X-Add-DT-for-Meraki-MR32.patch
+++ /dev/null
@@ -1,266 +0,0 @@
-From ec88a9c344d9fd8c3b11bff1f99a0b6248ae256d Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 22 Aug 2020 18:19:23 +0200
-Subject: [PATCH] ARM: BCM5301X: Add DT for Meraki MR32
-
-add support for the Cisco Meraki MR32.
-This is a dual-band enterprise class 802.11ac access point.
-The unit was donated by Chris Blake. Thank you!
-
-SoC:    Broadcom BCM53016A1 (1 GHz, 2 cores)
-RAM:    128 MiB
-NAND:   128 MiB Spansion S34ML01G2 (~114 MiB useable)
-ETH:    1GBit Ethernet Port - PoE
-WIFI1:  Broadcom BCM43520 an+ac (2x2:2 - id: 0x4352)
-WIFI2:  Broadcom BCM43520 bgn (2x2:2 - id: 0x4352)
-WIFI3:  Broadcom BCM43428 abgn (1x1:1 - id: 43428)
-
-BLE:    Broadcom BCM20732 (ttyS1)
-LEDS:   1 x Programmable RGB Status LED (driven by a PWM)
-        1 x White LED (GPIO)
-        1 x Orange LED Fault Indicator (GPIO)
-        2 x LAN Activity / Speed LEDs (On the RJ45 Port)
-BUTTON: one Reset button
-MISC:   AT24C64 8KiB EEPROM (i2c - stores Ethernet MAC)
-        ina219 hardware monitor (i2c)
-        Kensington Lock
-
-SERIAL:
-	WARNING: The serial port needs a TTL/RS-232 3V3 level converter!
-        The Serial setting is 115200-8-N-1. The board has a populated
-        right angle 1x4 0.1" pinheader.
-        The pinout is: VCC, RX, TX, GND.
-
-Odd stuff:
-	- uart0 clock frequency is 62.5 MHz.
-	- The LEDs are labeled as SYS-LED1 through SYS-LED3
-	  because of the silkscreen on the PCB.
-	- the original u-boot has been compiled with most functions
-	  and commands disabled. The u-boot env isn't setup properly
-	  either and as a result, the bcm47xxpart probing is not
-	  working. Hence, the nand partitions are specified through a
-	  "fixed-partition" binding.
-	- The "WICED SMART(TM)" Bluetooth LE 4.0 BCM20732 chip is
-	  connected to uart2 of the SoC. The BCM20732 does not
-	  provide a HCI. So the linux' bluetooth stack is useless.
-	  The mock-up node with the compatible binding and
-	  enable-gpios property is provided solely as documentation.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile                 |   1 +
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 197 +++++++++++++++++++++
- 2 files changed, 198 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -118,6 +118,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm47094-luxul-xwr-3150-v1.dtb \
- 	bcm47094-netgear-r8500.dtb \
- 	bcm47094-phicomm-k3.dtb \
-+	bcm53016-meraki-mr32.dtb \
- 	bcm94708.dtb \
- 	bcm94709.dtb \
- 	bcm953012er.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -0,0 +1,197 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Meraki MR32 / Codename: Espresso
-+ *
-+ * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+#include <dt-bindings/leds/common.h>
-+
-+/ {
-+	compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708";
-+	model = "Meraki MR32";
-+
-+	chosen {
-+		bootargs = " console=ttyS0,115200n8 earlycon";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000>;
-+		device_type = "memory";
-+	};
-+
-+	aliases {
-+		serial1 = &uart2;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		sysled3 {
-+			function = LED_FUNCTION_FAULT;
-+			color = <LED_COLOR_ID_AMBER>;
-+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-+			panic-indicator;
-+		};
-+		sysled2 {
-+			function = LED_FUNCTION_INDICATOR;
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	pwm-leds {
-+		compatible = "pwm-leds";
-+
-+		red {
-+			/* SYS-LED 1 - Tricolor */
-+			function = LED_FUNCTION_INDICATOR;
-+			color = <LED_COLOR_ID_RED>;
-+			pwms = <&pwm 0 50000 0>;
-+			max-brightness = <255>;
-+		};
-+
-+		green {
-+			/* SYS-LED 1 - Tricolor */
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_GREEN>;
-+			pwms = <&pwm 1 50000 0>;
-+			max-brightness = <255>;
-+		};
-+
-+		blue {
-+			/* SYS-LED 1 - Tricolor */
-+			function = LED_FUNCTION_INDICATOR;
-+			color = <LED_COLOR_ID_BLUE>;
-+			pwms = <&pwm 2 50000 0>;
-+			max-brightness = <255>;
-+		};
-+	};
-+
-+	i2c {
-+		/*
-+		 * The platform provided I2C does not budge.
-+		 * This is a replacement until I can figure
-+		 * out what are the missing bits...
-+		 */
-+
-+		compatible = "i2c-gpio";
-+		sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-+		scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-+		i2c-gpio,delay-us = <10>; /* close to 100 kHz */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		current_sense: ina219@45 {
-+			compatible = "ti,ina219";
-+			reg = <0x45>;
-+			shunt-resistor = <60000>; /* = 60 mOhms */
-+		};
-+
-+		eeprom: eeprom@50 {
-+			compatible = "atmel,24c64";
-+			reg = <0x50>;
-+			pagesize = <32>;
-+			read-only;
-+		};
-+	};
-+};
-+
-+&uart0 {
-+	clock-frequency = <62500000>;
-+	/delete-property/ clocks;
-+};
-+
-+&uart1 {
-+	status = "disabled";
-+};
-+
-+&uart2 {
-+	status = "okay";
-+	/*
-+	 * bluetooth-le {
-+	 *	compatible = "brcm,bcm20732";
-+	 *	enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
-+	 *};
-+	 */
-+};
-+
-+&gmac1 {
-+	status = "disabled";
-+};
-+&gmac2 {
-+	status = "disabled";
-+};
-+&gmac3 {
-+	status = "disabled";
-+};
-+
-+&pwm {
-+	status = "okay";
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinmux_pwm>;
-+};
-+
-+&nandcs {
-+	nand-ecc-algo = "hw";
-+
-+	partitions {
-+		/*
-+		 * The partition autodetection does not work for this device.
-+		 * It will only detect the "nvram" partition with an incorrect size.
-+		 *	[    1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0
-+		 *	[    1.727962] Creating 1 MTD partitions on "brcmnand.0":
-+		 *	[    1.733117] 0x000000400000-0x000008000000 : "nvram"
-+		 */
-+
-+		compatible = "fixed-partitions";
-+		#address-cells = <0x1>;
-+		#size-cells = <0x1>;
-+
-+		partition0@0 {
-+			label = "u-boot";
-+			reg = <0x0 0x100000>;
-+			read-only;
-+		};
-+
-+		partition1@100000 {
-+			label = "bootkernel1";
-+			reg = <0x100000 0x300000>;
-+			read-only;
-+		};
-+
-+		partition2@400000 {
-+			label = "nvram";
-+			reg = <0x400000 0x100000>;
-+			read-only;
-+		};
-+
-+		partition3@500000 {
-+			label = "bootkernel2";
-+			reg = <0x500000 0x300000>;
-+			read-only;
-+		};
-+
-+		partition4@800000 {
-+			label = "ubi";
-+			reg = <0x800000 0x7780000>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0001-ARM-dts-BCM5301X-Linksys-EA9500-add-port-5-and-port-.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0001-ARM-dts-BCM5301X-Linksys-EA9500-add-port-5-and-port-.patch
deleted file mode 100644
index f0cfbf8e63..0000000000
--- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0001-ARM-dts-BCM5301X-Linksys-EA9500-add-port-5-and-port-.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 1ca5f2430c4f9d85b98b8d6e5d93f8d4802faf8e Mon Sep 17 00:00:00 2001
-From: Vivek Unune <npcomplete13@gmail.com>
-Date: Wed, 14 Oct 2020 15:27:27 -0400
-Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7
-
-Add ports 5 and 7 which are connected to gmac cores 1 & 2.
-These will be disabled for now.
-
-Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/bcm47094-linksys-panamera.dts    | 24 +++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -242,6 +242,30 @@
- 			label = "wan";
- 		};
- 
-+		port@5 {
-+			reg = <5>;
-+			ethernet = <&gmac0>;
-+			label = "cpu";
-+			status = "disabled";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+
-+		port@7 {
-+			reg = <7>;
-+			ethernet = <&gmac1>;
-+			label = "cpu";
-+			status = "disabled";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+
- 		port@8 {
- 			reg = <8>;
- 			ethernet = <&gmac2>;
diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0002-ARM-dts-BCM5301X-Harmonize-EHCI-OHCI-DT-nodes-name.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0002-ARM-dts-BCM5301X-Harmonize-EHCI-OHCI-DT-nodes-name.patch
deleted file mode 100644
index d6e5fca967..0000000000
--- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0002-ARM-dts-BCM5301X-Harmonize-EHCI-OHCI-DT-nodes-name.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 74abbfe99f43eb7466d26d9e48fbeb46b8f3d804 Mon Sep 17 00:00:00 2001
-From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
-Date: Tue, 20 Oct 2020 14:59:37 +0300
-Subject: [PATCH] ARM: dts: BCM5301X: Harmonize EHCI/OHCI DT nodes name
-
-In accordance with the Generic EHCI/OHCI bindings the corresponding node
-name is suppose to comply with the Generic USB HCD DT schema, which
-requires the USB nodes to have the name acceptable by the regexp:
-"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
-nodes are correctly named.
-
-Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 4 ++--
- arch/arm/boot/dts/bcm53573.dtsi | 4 ++--
- 2 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -267,7 +267,7 @@
- 
- 			interrupt-parent = <&gic>;
- 
--			ehci: ehci@21000 {
-+			ehci: usb@21000 {
- 				#usb-cells = <0>;
- 
- 				compatible = "generic-ehci";
-@@ -289,7 +289,7 @@
- 				};
- 			};
- 
--			ohci: ohci@22000 {
-+			ohci: usb@22000 {
- 				#usb-cells = <0>;
- 
- 				compatible = "generic-ohci";
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -135,7 +135,7 @@
- 			#address-cells = <1>;
- 			#size-cells = <1>;
- 
--			ehci: ehci@4000 {
-+			ehci: usb@4000 {
- 				compatible = "generic-ehci";
- 				reg = <0x4000 0x1000>;
- 				interrupt-parent = <&gic>;
-@@ -155,7 +155,7 @@
- 				};
- 			};
- 
--			ohci: ohci@d000 {
-+			ohci: usb@d000 {
- 				#usb-cells = <0>;
- 
- 				compatible = "generic-ohci";
diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0003-ARM-dts-BCM5310X-Harmonize-xHCI-DT-nodes-name.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0003-ARM-dts-BCM5310X-Harmonize-xHCI-DT-nodes-name.patch
deleted file mode 100644
index 2f9c8ce8c0..0000000000
--- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0003-ARM-dts-BCM5310X-Harmonize-xHCI-DT-nodes-name.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 4b650a20bdb5f9558007dd3055a17a1644a91c3e Mon Sep 17 00:00:00 2001
-From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
-Date: Tue, 20 Oct 2020 14:59:46 +0300
-Subject: [PATCH] ARM: dts: BCM5310X: Harmonize xHCI DT nodes name
-
-In accordance with the Generic xHCI bindings the corresponding node
-name is suppose to comply with the Generic USB HCD DT schema, which
-requires the USB nodes to have the name acceptable by the regexp:
-"^usb(@.*)?" . Make sure the "generic-xhci"-compatible nodes are
-correctly named.
-
-Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
-Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -320,7 +320,7 @@
- 
- 			interrupt-parent = <&gic>;
- 
--			xhci: xhci@23000 {
-+			xhci: usb@23000 {
- 				#usb-cells = <0>;
- 
- 				compatible = "generic-xhci";
diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0004-ARM-dts-BCM5301X-Linksys-EA9500-add-fixed-partitions.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0004-ARM-dts-BCM5301X-Linksys-EA9500-add-fixed-partitions.patch
deleted file mode 100644
index c3fdd163d9..0000000000
--- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0004-ARM-dts-BCM5301X-Linksys-EA9500-add-fixed-partitions.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From bd9a01e28e5d1632528e531480b42d6e2c861d88 Mon Sep 17 00:00:00 2001
-From: Vivek Unune <npcomplete13@gmail.com>
-Date: Sun, 1 Nov 2020 15:08:03 -0500
-Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions
-
-This router has dual paritions to store trx firmware image and
-dual partitions for nvram. The second one in each of these cases acts
-as a backup store.
-
-When tested with OpenWrt, the default partition parser causes two issues:
-
-1. It labels both nvram partitions as nvram. In factory, second one is
-labeled devinfo.
-2. It parses second trx image and tries to create second 'linux' partition
-and fails with - cannot create duplicate 'linux' partition
-
-The following patch works around both of these issues.
-
-Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/bcm47094-linksys-panamera.dts    | 41 +++++++++++++++++++
- 1 file changed, 41 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -292,3 +292,44 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&nandcs {
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			label = "boot";
-+			reg = <0x0000000 0x0080000>;
-+			read-only;
-+		};
-+
-+		partition@80000 {
-+			label = "nvram";
-+			reg = <0x080000 0x0100000>;
-+		};
-+
-+		partition@180000{
-+			label = "devinfo";
-+			reg = <0x0180000 0x080000>;
-+		};
-+
-+		partition@200000 {
-+			label = "firmware";
-+			reg = <0x0200000 0x01D00000>;
-+			compatible = "brcm,trx";
-+		};
-+
-+		partition@1F00000 {
-+			label = "failsafe";
-+			reg = <0x01F00000 0x01D00000>;
-+			read-only;
-+		};
-+
-+		partition@5200000 {
-+			label = "system";
-+			reg = <0x05200000 0x02E00000>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0005-ARM-dts-BCM5301X-Use-corretc-pinctrl-compatible-for-.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0005-ARM-dts-BCM5301X-Use-corretc-pinctrl-compatible-for-.patch
deleted file mode 100644
index ddebdc4343..0000000000
--- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0005-ARM-dts-BCM5301X-Use-corretc-pinctrl-compatible-for-.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 2f34ae32f5e74096540cd7ce95bfd467cb74b21a Mon Sep 17 00:00:00 2001
-From: Vivek Unune <npcomplete13@gmail.com>
-Date: Wed, 4 Nov 2020 15:29:51 -0500
-Subject: [PATCH] ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709x
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM47094 version of pinmux uses different compatible and supports MDIO
-pinmux pins. Hence, use the correct compatible string and defines the
-MDIO pins group.
-
-Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094.dtsi | 9 +++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
- 2 files changed, 10 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm47094.dtsi
-+++ b/arch/arm/boot/dts/bcm47094.dtsi
-@@ -8,6 +8,15 @@
- / {
- };
- 
-+&pinctrl {
-+	compatible = "brcm,bcm4709-pinmux";
-+
-+	pinmux_mdio: mdio {
-+		groups = "mdio_grp";
-+		function = "mdio";
-+	};
-+};
-+
- &usb3_phy {
- 	compatible = "brcm,ns-bx-usb3-phy";
- };
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -430,7 +430,7 @@
- 			#address-cells = <1>;
- 			#size-cells = <1>;
- 
--			pin-controller@1c0 {
-+			pinctrl: pin-controller@1c0 {
- 				compatible = "brcm,bcm4708-pinmux";
- 				reg = <0x1c0 0x24>;
- 				reg-names = "cru_gpio_control";
diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0006-ARM-dts-BCM5301X-Linksys-EA9500-make-use-of-pinctrl.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0006-ARM-dts-BCM5301X-Linksys-EA9500-make-use-of-pinctrl.patch
deleted file mode 100644
index 785271546b..0000000000
--- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0006-ARM-dts-BCM5301X-Linksys-EA9500-make-use-of-pinctrl.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From c862059875cffc013ee27bf9759ac288224e7a14 Mon Sep 17 00:00:00 2001
-From: Vivek Unune <npcomplete13@gmail.com>
-Date: Wed, 4 Nov 2020 15:29:52 -0500
-Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl
-
-Now that we have a pin controller, use that instead of manuplating the
-mdio/mdc pins directly. i.e. we no longer require the mdio-mii-mux
-
-Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/bcm47094-linksys-panamera.dts    | 26 +++----------------
- 1 file changed, 4 insertions(+), 22 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -123,33 +123,13 @@
- 		};
- 	};
- 
--	mdio-bus-mux {
--		#address-cells = <1>;
--		#size-cells = <0>;
-+	mdio-bus-mux@18003000 {
- 
- 		/* BIT(9) = 1 => external mdio */
--		mdio_ext: mdio@200 {
-+		mdio@200 {
- 			reg = <0x200>;
- 			#address-cells = <1>;
- 			#size-cells = <0>;
--		};
--	};
--
--	mdio-mii-mux {
--		compatible = "mdio-mux-mmioreg";
--		mdio-parent-bus = <&mdio_ext>;
--		#address-cells = <1>;
--		#size-cells = <0>;
--		reg = <0x1800c1c0 0x4>;
--
--		/* BIT(6) = mdc, BIT(7) = mdio */
--		mux-mask = <0xc0>;
--
--		mdio-mii@0 {
--			/* Enable MII function */
--			reg = <0x0>;
--			#address-cells = <1>;
--			#size-cells = <0>;
- 
- 			switch@0  {
- 				compatible = "brcm,bcm53125";
-@@ -159,6 +139,8 @@
- 				reset-names = "robo_reset";
- 				reg = <0>;
- 				dsa,member = <1 0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinmux_mdio>;
- 
- 				ports {
- 					#address-cells = <1>;
diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0007-ARM-dts-BCM5301X-Move-CRU-devices-to-the-CRU-node.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0007-ARM-dts-BCM5301X-Move-CRU-devices-to-the-CRU-node.patch
deleted file mode 100644
index 3c3db540d0..0000000000
--- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0007-ARM-dts-BCM5301X-Move-CRU-devices-to-the-CRU-node.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 776461b1795b4dc4084894cf53399044aafa1d21 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 11 Nov 2020 15:55:38 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Move CRU devices to the CRU node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Clocks and thermal blocks are part of the CRU ("Clock and Reset Unit" or
-"Central Resource Unit").
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 51 +++++++++++++++++----------------
- 1 file changed, 26 insertions(+), 25 deletions(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -430,6 +430,26 @@
- 			#address-cells = <1>;
- 			#size-cells = <1>;
- 
-+			lcpll0: lcpll0@100 {
-+				#clock-cells = <1>;
-+				compatible = "brcm,nsp-lcpll0";
-+				reg = <0x100 0x14>;
-+				clocks = <&osc>;
-+				clock-output-names = "lcpll0", "pcie_phy",
-+						     "sdio", "ddr_phy";
-+			};
-+
-+			genpll: genpll@140 {
-+				#clock-cells = <1>;
-+				compatible = "brcm,nsp-genpll";
-+				reg = <0x140 0x24>;
-+				clocks = <&osc>;
-+				clock-output-names = "genpll", "phy",
-+						     "ethernetclk",
-+						     "usbclk", "iprocfast",
-+						     "sata1", "sata2";
-+			};
-+
- 			pinctrl: pin-controller@1c0 {
- 				compatible = "brcm,bcm4708-pinmux";
- 				reg = <0x1c0 0x24>;
-@@ -456,32 +476,13 @@
- 					function = "uart1";
- 				};
- 			};
--		};
--	};
- 
--	lcpll0: lcpll0@1800c100 {
--		#clock-cells = <1>;
--		compatible = "brcm,nsp-lcpll0";
--		reg = <0x1800c100 0x14>;
--		clocks = <&osc>;
--		clock-output-names = "lcpll0", "pcie_phy", "sdio",
--				     "ddr_phy";
--	};
--
--	genpll: genpll@1800c140 {
--		#clock-cells = <1>;
--		compatible = "brcm,nsp-genpll";
--		reg = <0x1800c140 0x24>;
--		clocks = <&osc>;
--		clock-output-names = "genpll", "phy", "ethernetclk",
--				     "usbclk", "iprocfast", "sata1",
--				     "sata2";
--	};
--
--	thermal: thermal@1800c2c0 {
--		compatible = "brcm,ns-thermal";
--		reg = <0x1800c2c0 0x10>;
--		#thermal-sensor-cells = <0>;
-+			thermal: thermal@2c0 {
-+				compatible = "brcm,ns-thermal";
-+				reg = <0x2c0 0x10>;
-+				#thermal-sensor-cells = <0>;
-+			};
-+		};
- 	};
- 
- 	srab: srab@18007000 {
diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0008-ARM-dts-BCM5301X-Disable-USB-3-PHY-on-devices-withou.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0008-ARM-dts-BCM5301X-Disable-USB-3-PHY-on-devices-withou.patch
deleted file mode 100644
index 64415c14db..0000000000
--- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0008-ARM-dts-BCM5301X-Disable-USB-3-PHY-on-devices-withou.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 632ddf978565378e7efb9ea77c0ba239ea66bfdc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 13 Nov 2020 11:09:19 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB
- 3
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It seems pointless to have it enabled.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts       | 4 ----
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts       | 4 ----
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ----
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts      | 4 ----
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts      | 4 ----
- arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 ----
- 6 files changed, 24 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -57,10 +57,6 @@
- 	status = "okay";
- };
- 
--&usb3_phy {
--	status = "okay";
--};
--
- &srab {
- 	status = "okay";
- 
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -64,10 +64,6 @@
- 	status = "okay";
- };
- 
--&usb3_phy {
--	status = "okay";
--};
--
- &srab {
- 	status = "okay";
- 
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -117,7 +117,3 @@
- 		};
- 	};
- };
--
--&usb3_phy {
--	status = "okay";
--};
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -57,10 +57,6 @@
- 	status = "okay";
- };
- 
--&usb3_phy {
--	status = "okay";
--};
--
- &srab {
- 	status = "okay";
- 
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -105,10 +105,6 @@
- 	status = "okay";
- };
- 
--&usb3_phy {
--	status = "okay";
--};
--
- &srab {
- 	status = "okay";
- 
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -126,7 +126,3 @@
- &usb2 {
- 	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- };
--
--&usb3_phy {
--	status = "okay";
--};
diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0009-ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0009-ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150.patch
deleted file mode 100644
index 5834e300f5..0000000000
--- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0009-ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From b2ab5e8697ef6591aeeda23be49e096705dbbda3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 13 Nov 2020 10:50:12 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This device has a functional USB 3 port so PHY is required.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reported-by: kernel test robot <lkp@intel.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -71,6 +71,10 @@
- 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
- 
-+&usb3_phy {
-+	status = "okay";
-+};
-+
- &spi_nor {
- 	status = "okay";
- };
diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0010-ARM-dts-BCM5301X-Update-Ethernet-switch-node-name.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0010-ARM-dts-BCM5301X-Update-Ethernet-switch-node-name.patch
deleted file mode 100644
index b3a774e340..0000000000
--- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0010-ARM-dts-BCM5301X-Update-Ethernet-switch-node-name.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From f527cb6f3345f7faa8e61dd9f3c437437327428c Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Mon, 9 Nov 2020 11:41:01 -0800
-Subject: [PATCH] ARM: dts: BCM5301X: Update Ethernet switch node name
-
-Update the switch unit name from srab to ethernet-switch, allowing us to
-fix warnings such as:
-
-  CHECK   arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml
-arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml:
-srab@18007000: $nodename:0: 'srab@18007000' does not match
-'^(ethernet-)?switch(@.*)?$'
-        From schema:
-Documentation/devicetree/bindings/net/dsa/b53.yaml
-
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -485,7 +485,7 @@
- 		};
- 	};
- 
--	srab: srab@18007000 {
-+	srab: ethernet-switch@18007000 {
- 		compatible = "brcm,bcm5301x-srab";
- 		reg = <0x18007000 0x1000>;
- 
diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0011-ARM-dts-BCM5301X-Add-a-default-compatible-for-switch.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0011-ARM-dts-BCM5301X-Add-a-default-compatible-for-switch.patch
deleted file mode 100644
index 677e94f271..0000000000
--- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0011-ARM-dts-BCM5301X-Add-a-default-compatible-for-switch.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 953efcb0c0234f8c488ebd4090378e949d6ba78b Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Mon, 9 Nov 2020 16:42:09 -0800
-Subject: [PATCH] ARM: dts: BCM5301X: Add a default compatible for switch node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Provide a default compatible string which is based on the 53011 SRAB
-compatible by default. The 4709 and 47094 default to the 53012 SRAB
-compatible.
-
-This allows us to have sane defaults and silences the following
-warnings:
-
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml:
-ethernet-switch@18007000: compatible: 'oneOf' conditional failed, one
-must be fixed:
-        ['brcm,bcm5301x-srab'] is too short
-        'brcm,bcm5325' was expected
-        'brcm,bcm53115' was expected
-        'brcm,bcm53125' was expected
-        'brcm,bcm53128' was expected
-        'brcm,bcm5365' was expected
-        'brcm,bcm5395' was expected
-        'brcm,bcm5389' was expected
-        'brcm,bcm5397' was expected
-        'brcm,bcm5398' was expected
-        'brcm,bcm11360-srab' was expected
-        'brcm,bcm5301x-srab' is not one of ['brcm,bcm53010-srab',
-'brcm,bcm53011-srab', 'brcm,bcm53012-srab', 'brcm,bcm53018-srab',
-'brcm,bcm53019-srab']
-        'brcm,bcm5301x-srab' is not one of ['brcm,bcm11404-srab',
-'brcm,bcm11407-srab', 'brcm,bcm11409-srab', 'brcm,bcm58310-srab',
-'brcm,bcm58311-srab', 'brcm,bcm58313-srab']
-        'brcm,bcm5301x-srab' is not one of ['brcm,bcm58522-srab',
-'brcm,bcm58523-srab', 'brcm,bcm58525-srab', 'brcm,bcm58622-srab',
-'brcm,bcm58623-srab', 'brcm,bcm58625-srab', 'brcm,bcm88312-srab']
-        'brcm,bcm5301x-srab' is not one of ['brcm,bcm3384-switch',
-'brcm,bcm6328-switch', 'brcm,bcm6368-switch']
-        From schema:
-Documentation/devicetree/bindings/net/dsa/b53.yaml
-
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4709.dtsi  | 4 ++++
- arch/arm/boot/dts/bcm47094.dtsi | 4 ++++
- arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
- 3 files changed, 9 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm4709.dtsi
-+++ b/arch/arm/boot/dts/bcm4709.dtsi
-@@ -9,3 +9,7 @@
- 	clock-frequency = <125000000>;
- 	status = "okay";
- };
-+
-+&srab {
-+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-+};
---- a/arch/arm/boot/dts/bcm47094.dtsi
-+++ b/arch/arm/boot/dts/bcm47094.dtsi
-@@ -25,3 +25,7 @@
- 	clock-frequency = <125000000>;
- 	status = "okay";
- };
-+
-+&srab {
-+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-+};
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -486,7 +486,7 @@
- 	};
- 
- 	srab: ethernet-switch@18007000 {
--		compatible = "brcm,bcm5301x-srab";
-+		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
- 		reg = <0x18007000 0x1000>;
- 
- 		status = "disabled";
diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0012-ARM-dts-BCM5301X-Provide-defaults-ports-container-no.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0012-ARM-dts-BCM5301X-Provide-defaults-ports-container-no.patch
deleted file mode 100644
index 6e4f5f7bb8..0000000000
--- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0012-ARM-dts-BCM5301X-Provide-defaults-ports-container-no.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-From fd577b41421bc24e2d04cab96d387301b649eb14 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Mon, 9 Nov 2020 17:20:17 -0800
-Subject: [PATCH] ARM: dts: BCM5301X: Provide defaults ports container node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Provide an empty 'ports' container node with the correct #address-cells
-and #size-cells properties. This silences the following warning:
-
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml:
-ethernet-switch@18007000: 'oneOf' conditional failed, one must be fixed:
-        'ports' is a required property
-        'ethernet-ports' is a required property
-        From schema:
-Documentation/devicetree/bindings/net/dsa/b53.yaml
-
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts     | 3 ---
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts     | 3 ---
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts    | 3 ---
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts    | 3 ---
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts    | 3 ---
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts  | 3 ---
- arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts    | 3 ---
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts    | 3 ---
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts    | 3 ---
- arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 3 ---
- arch/arm/boot/dts/bcm5301x.dtsi                  | 4 ++++
- arch/arm/boot/dts/bcm953012er.dts                | 3 ---
- 12 files changed, 4 insertions(+), 33 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -61,9 +61,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "poe";
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -68,9 +68,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@4 {
- 			reg = <4>;
- 			label = "lan";
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -122,9 +122,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "lan4";
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -61,9 +61,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@4 {
- 			reg = <4>;
- 			label = "poe";
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -109,9 +109,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "lan4";
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -201,9 +201,6 @@
- 	dsa,member = <0 0>;
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@1 {
- 			reg = <1>;
- 			label = "lan7";
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -59,9 +59,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "poe";
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -57,9 +57,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "lan";
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -108,9 +108,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "lan4";
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -83,9 +83,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "lan4";
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -492,6 +492,10 @@
- 		status = "disabled";
- 
- 		/* ports are defined in board DTS */
-+		ports {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
- 	};
- 
- 	rng: rng@18004000 {
---- a/arch/arm/boot/dts/bcm953012er.dts
-+++ b/arch/arm/boot/dts/bcm953012er.dts
-@@ -69,9 +69,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "port0";
diff --git a/target/linux/bcm53xx/patches-5.4/035-v5.13-0001-ARM-dts-BCM5301X-fix-reg-formatting-in-memory-node.patch b/target/linux/bcm53xx/patches-5.4/035-v5.13-0001-ARM-dts-BCM5301X-fix-reg-formatting-in-memory-node.patch
deleted file mode 100644
index 532c1f72ab..0000000000
--- a/target/linux/bcm53xx/patches-5.4/035-v5.13-0001-ARM-dts-BCM5301X-fix-reg-formatting-in-memory-node.patch
+++ /dev/null
@@ -1,339 +0,0 @@
-From d0b16b9596468c29742049e26a866f559ec476bb Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 9 Mar 2021 13:55:00 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: fix "reg" formatting in /memory node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes warnings/errors like:
-arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml: /: memory@0:reg:0: [0, 134217728, 2281701376, 402653184] is too long
-        From schema: /lib/python3.6/site-packages/dtschema/schemas/reg.yaml
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts        | 4 ++--
- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts        | 4 ++--
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts  | 4 ++--
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts        | 4 ++--
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts     | 4 ++--
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts      | 4 ++--
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts        | 4 ++--
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ++--
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts  | 4 ++--
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts        | 4 ++--
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts  | 4 ++--
- arch/arm/boot/dts/bcm4709-linksys-ea9200.dts       | 4 ++--
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts        | 4 ++--
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts        | 4 ++--
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts      | 4 ++--
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts    | 4 ++--
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts      | 4 ++--
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts      | 4 ++--
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts      | 4 ++--
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts      | 4 ++--
- arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts   | 4 ++--
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts       | 4 ++--
- arch/arm/boot/dts/bcm47094-phicomm-k3.dts          | 4 ++--
- 23 files changed, 46 insertions(+), 46 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -21,8 +21,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -21,8 +21,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -21,8 +21,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x18000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x18000000>;
- 	};
- 
- 	spi {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -22,8 +22,8 @@
- 
- 	memory {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -21,8 +21,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -21,8 +21,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -21,8 +21,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -21,8 +21,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	spi {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -21,8 +21,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	spi {
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -21,8 +21,8 @@
- 
- 	memory {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -21,8 +21,8 @@
- 
- 	memory {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x18000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x18000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-@@ -18,8 +18,8 @@
- 
- 	memory {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	gpio-keys {
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -21,8 +21,8 @@
- 
- 	memory {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -32,8 +32,8 @@
- 
- 	memory {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -21,8 +21,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	nand: nand@18028000 {
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -18,8 +18,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	gpio-keys {
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -18,8 +18,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x18000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x18000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -18,8 +18,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x18000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x18000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -18,8 +18,8 @@
- 
- 	memory {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x18000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x18000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -18,8 +18,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -18,8 +18,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x18000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x18000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -18,8 +18,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x18000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x18000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-@@ -15,8 +15,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000
--		       0x88000000 0x18000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x18000000>;
- 	};
- 
- 	gpio-keys {
diff --git a/target/linux/bcm53xx/patches-5.4/035-v5.13-0002-ARM-dts-BCM5301X-Describe-NVMEM-NVRAM-on-Linksys-Lux.patch b/target/linux/bcm53xx/patches-5.4/035-v5.13-0002-ARM-dts-BCM5301X-Describe-NVMEM-NVRAM-on-Linksys-Lux.patch
deleted file mode 100644
index 136d221a97..0000000000
--- a/target/linux/bcm53xx/patches-5.4/035-v5.13-0002-ARM-dts-BCM5301X-Describe-NVMEM-NVRAM-on-Linksys-Lux.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From 428ac8df021dd1cbcc693eb76636873d42327e5d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 10 Mar 2021 22:04:46 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Describe NVMEM NVRAM on Linksys & Luxul
- routers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Provide access to NVRAM which contains device environment variables.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts  | 5 +++++
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts    | 5 +++++
- arch/arm/boot/dts/bcm4709-linksys-ea9200.dts     | 5 +++++
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts  | 5 +++++
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts    | 5 +++++
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts    | 5 +++++
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts    | 5 +++++
- arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 5 +++++
- 8 files changed, 40 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-@@ -21,6 +21,11 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
-+	nvram@1c080000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1c080000 0x180000>;
-+	};
-+
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -21,6 +21,11 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
-+	nvram@1eff0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1eff0000 0x10000>;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-@@ -22,6 +22,11 @@
- 		      <0x88000000 0x08000000>;
- 	};
- 
-+	nvram@1c080000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1c080000 0x180000>;
-+	};
-+
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 		#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -22,6 +22,11 @@
- 		      <0x88000000 0x08000000>;
- 	};
- 
-+	nvram@1c080000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1c080000 0x100000>;
-+	};
-+
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -22,6 +22,11 @@
- 		      <0x88000000 0x18000000>;
- 	};
- 
-+	nvram@1eff0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1eff0000 0x10000>;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -22,6 +22,11 @@
- 		      <0x88000000 0x18000000>;
- 	};
- 
-+	nvram@1eff0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1eff0000 0x10000>;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -22,6 +22,11 @@
- 		      <0x88000000 0x08000000>;
- 	};
- 
-+	nvram@1eff0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1eff0000 0x10000>;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -22,6 +22,11 @@
- 		      <0x88000000 0x18000000>;
- 	};
- 
-+	nvram@1eff0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1eff0000 0x10000>;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
diff --git a/target/linux/bcm53xx/patches-5.4/035-v5.13-0003-ARM-dts-BCM5301X-Fix-Linksys-EA9500-partitions.patch b/target/linux/bcm53xx/patches-5.4/035-v5.13-0003-ARM-dts-BCM5301X-Fix-Linksys-EA9500-partitions.patch
deleted file mode 100644
index d52f46f979..0000000000
--- a/target/linux/bcm53xx/patches-5.4/035-v5.13-0003-ARM-dts-BCM5301X-Fix-Linksys-EA9500-partitions.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 1d3352aeed164ef73f05cf80ca001f11d2f3312d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 29 Mar 2021 07:54:30 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Fix Linksys EA9500 partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Partitions are basically fixed indeed but firmware ones don't have
-hardcoded function ("firmware" vs "failsafe"). Actual function depends
-on bootloader configuration. Use a proper binding for that.
-
-While at it fix numbers formatting to avoid:
-arch/arm/boot/dts/bcm47094-linksys-panamera.dt.yaml: partitions: 'partition@1F00000' does not match any of the regexes: '^partition@[0-9a-f]+$', 'pinctrl-[0-9]+'
-        From schema: Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 16 +++++++---------
- 1 file changed, 7 insertions(+), 9 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -279,7 +279,7 @@
- 
- &nandcs {
- 	partitions {
--		compatible = "fixed-partitions";
-+		compatible = "linksys,ns-partitions";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 
-@@ -300,20 +300,18 @@
- 		};
- 
- 		partition@200000 {
--			label = "firmware";
--			reg = <0x0200000 0x01D00000>;
--			compatible = "brcm,trx";
-+			reg = <0x0200000 0x01d00000>;
-+			compatible = "linksys,ns-firmware", "brcm,trx";
- 		};
- 
--		partition@1F00000 {
--			label = "failsafe";
--			reg = <0x01F00000 0x01D00000>;
--			read-only;
-+		partition@1f00000 {
-+			reg = <0x01f00000 0x01d00000>;
-+			compatible = "linksys,ns-firmware", "brcm,trx";
- 		};
- 
- 		partition@5200000 {
- 			label = "system";
--			reg = <0x05200000 0x02E00000>;
-+			reg = <0x05200000 0x02e00000>;
- 		};
- 	};
- };
diff --git a/target/linux/bcm53xx/patches-5.4/035-v5.13-0004-ARM-dts-BCM5301X-Set-Linksys-EA9500-power-LED.patch b/target/linux/bcm53xx/patches-5.4/035-v5.13-0004-ARM-dts-BCM5301X-Set-Linksys-EA9500-power-LED.patch
deleted file mode 100644
index 76cb296422..0000000000
--- a/target/linux/bcm53xx/patches-5.4/035-v5.13-0004-ARM-dts-BCM5301X-Set-Linksys-EA9500-power-LED.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From dcb56d61d5a8acca0a357cc603397bc0272ce4cb Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 29 Mar 2021 10:04:09 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Set Linksys EA9500 power LED
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Set Linux default trigger to default on, just like it's normally done
-for power LEDs.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -75,6 +75,7 @@
- 		power {
- 			label = "bcm53xx:white:power";
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-on";
- 		};
- 
- 		wifi-disabled {
diff --git a/target/linux/bcm53xx/patches-5.4/036-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch b/target/linux/bcm53xx/patches-5.4/036-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch
deleted file mode 100644
index 48cceee743..0000000000
--- a/target/linux/bcm53xx/patches-5.4/036-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From b660269cba748dfd07eb5551a88ff34d5ea0b86e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 16 Apr 2021 15:37:48 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Fix NAND nodes names
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches nand-controller.yaml requirements.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
-
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -24,8 +24,8 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
--	nand: nand@18028000 {
--		nandcs@0 {
-+	nand_controller: nand-controller@18028000 {
-+		nand@0 {
- 			partitions {
- 				compatible = "fixed-partitions";
- 				#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -25,8 +25,8 @@
- 		      <0x88000000 0x08000000>;
- 	};
- 
--	nand: nand@18028000 {
--		nandcs@0 {
-+	nand_controller: nand-controller@18028000 {
-+		nand@0 {
- 			partitions {
- 				compatible = "fixed-partitions";
- 				#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-@@ -6,8 +6,8 @@
-  */
- 
- / {
--	nand@18028000 {
--		nandcs: nandcs@0 {
-+	nand-controller@18028000 {
-+		nandcs: nand@0 {
- 			compatible = "brcm,nandcs";
- 			reg = <0>;
- 			#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -503,7 +503,7 @@
- 		reg = <0x18004000 0x14>;
- 	};
- 
--	nand: nand@18028000 {
-+	nand_controller: nand-controller@18028000 {
- 		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
- 		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
- 		reg-names = "nand", "iproc-idm", "iproc-ext";
---- a/arch/arm/boot/dts/bcm953012k.dts
-+++ b/arch/arm/boot/dts/bcm953012k.dts
-@@ -49,8 +49,8 @@
- 	};
- };
- 
--&nand {
--	nandcs@0 {
-+&nand_controller {
-+	nand@0 {
- 		compatible = "brcm,nandcs";
- 		reg = <0>;
- 		nand-on-flash-bbt;
diff --git a/target/linux/bcm53xx/patches-5.4/036-v5.14-0002-ARM-dts-BCM5301X-Fix-pinmux-subnodes-names.patch b/target/linux/bcm53xx/patches-5.4/036-v5.14-0002-ARM-dts-BCM5301X-Fix-pinmux-subnodes-names.patch
deleted file mode 100644
index d8a4f87c38..0000000000
--- a/target/linux/bcm53xx/patches-5.4/036-v5.14-0002-ARM-dts-BCM5301X-Fix-pinmux-subnodes-names.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From bb95d7d440fefd104c593d9cb20da6d34a474e97 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 21 Apr 2021 11:00:06 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Fix pinmux subnodes names
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches pinmux-node.yaml requirements.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094.dtsi | 2 +-
- arch/arm/boot/dts/bcm5301x.dtsi | 6 +++---
- 2 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094.dtsi
-+++ b/arch/arm/boot/dts/bcm47094.dtsi
-@@ -11,7 +11,7 @@
- &pinctrl {
- 	compatible = "brcm,bcm4709-pinmux";
- 
--	pinmux_mdio: mdio {
-+	pinmux_mdio: mdio-pins {
- 		groups = "mdio_grp";
- 		function = "mdio";
- 	};
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -460,18 +460,18 @@
- 					function = "spi";
- 				};
- 
--				pinmux_i2c: i2c {
-+				pinmux_i2c: i2c-pins {
- 					groups = "i2c_grp";
- 					function = "i2c";
- 				};
- 
--				pinmux_pwm: pwm {
-+				pinmux_pwm: pwm-pins {
- 					groups = "pwm0_grp", "pwm1_grp",
- 						 "pwm2_grp", "pwm3_grp";
- 					function = "pwm";
- 				};
- 
--				pinmux_uart1: uart1 {
-+				pinmux_uart1: uart1-pins {
- 					groups = "uart1_grp";
- 					function = "uart1";
- 				};
diff --git a/target/linux/bcm53xx/patches-5.4/037-v5.15-0001-ARM-dts-BCM5301X-Fix-nodes-names.patch b/target/linux/bcm53xx/patches-5.4/037-v5.15-0001-ARM-dts-BCM5301X-Fix-nodes-names.patch
deleted file mode 100644
index e779d45645..0000000000
--- a/target/linux/bcm53xx/patches-5.4/037-v5.15-0001-ARM-dts-BCM5301X-Fix-nodes-names.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 0e89c0d8e8edece7f8e4607841ca6651885d23b1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 19 Aug 2021 08:57:00 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Fix nodes names
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes following errors for all BCM5301X dts files:
-chipcommonA@18000000: $nodename:0: 'chipcommonA@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
-mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
-mdio-bus-mux@18003000: $nodename:0: 'mdio-bus-mux@18003000' does not match '^mdio-mux[\\-@]?'
-dmu@1800c000: $nodename:0: 'dmu@1800c000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 2 +-
- arch/arm/boot/dts/bcm5301x.dtsi                 | 8 ++++----
- 2 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -129,7 +129,7 @@
- 		};
- 	};
- 
--	mdio-bus-mux@18003000 {
-+	mdio-mux@18003000 {
- 
- 		/* BIT(9) = 1 => external mdio */
- 		mdio@200 {
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -19,7 +19,7 @@
- 	#size-cells = <1>;
- 	interrupt-parent = <&gic>;
- 
--	chipcommonA@18000000 {
-+	chipcommon-a-bus@18000000 {
- 		compatible = "simple-bus";
- 		ranges = <0x00000000 0x18000000 0x00001000>;
- 		#address-cells = <1>;
-@@ -44,7 +44,7 @@
- 		};
- 	};
- 
--	mpcore@19000000 {
-+	mpcore-bus@19000000 {
- 		compatible = "simple-bus";
- 		ranges = <0x00000000 0x19000000 0x00023000>;
- 		#address-cells = <1>;
-@@ -371,7 +371,7 @@
- 		#address-cells = <1>;
- 	};
- 
--	mdio-bus-mux@18003000 {
-+	mdio-mux@18003000 {
- 		compatible = "mdio-mux-mmioreg";
- 		mdio-parent-bus = <&mdio>;
- 		#address-cells = <1>;
-@@ -417,7 +417,7 @@
- 		status = "disabled";
- 	};
- 
--	dmu@1800c000 {
-+	dmu-bus@1800c000 {
- 		compatible = "simple-bus";
- 		ranges = <0 0x1800c000 0x1000>;
- 		#address-cells = <1>;
diff --git a/target/linux/bcm53xx/patches-5.4/037-v5.15-0002-ARM-dts-BCM5301X-Fix-MDIO-mux-binding.patch b/target/linux/bcm53xx/patches-5.4/037-v5.15-0002-ARM-dts-BCM5301X-Fix-MDIO-mux-binding.patch
deleted file mode 100644
index dc20720dbd..0000000000
--- a/target/linux/bcm53xx/patches-5.4/037-v5.15-0002-ARM-dts-BCM5301X-Fix-MDIO-mux-binding.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 75a5646c26895c4cfadc8d54aa53ac5455947895 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 19 Aug 2021 08:57:01 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Fix MDIO mux binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes following error for all BCM5301X dts files:
-mdio-bus-mux@18003000: compatible: ['mdio-mux-mmioreg'] is too short
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -372,7 +372,7 @@
- 	};
- 
- 	mdio-mux@18003000 {
--		compatible = "mdio-mux-mmioreg";
-+		compatible = "mdio-mux-mmioreg", "mdio-mux";
- 		mdio-parent-bus = <&mdio>;
- 		#address-cells = <1>;
- 		#size-cells = <0>;
diff --git a/target/linux/bcm53xx/patches-5.4/037-v5.15-0003-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch b/target/linux/bcm53xx/patches-5.4/037-v5.15-0003-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch
deleted file mode 100644
index fda22404a5..0000000000
--- a/target/linux/bcm53xx/patches-5.4/037-v5.15-0003-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch
+++ /dev/null
@@ -1,158 +0,0 @@
-From def3d0357e0539e6f6b82f079ff156def6ec2107 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 19 Aug 2021 08:57:02 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Fix memory nodes names
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Thix fixes:
-arch/arm/boot/dts/bcm4708-netgear-r6250.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
-arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
-arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]}
-arch/arm/boot/dts/bcm4709-linksys-ea9200.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
-arch/arm/boot/dts/bcm4709-netgear-r7000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
-arch/arm/boot/dts/bcm4709-netgear-r8000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
-arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}
-arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]}
-arch/arm/boot/dts/bcm53016-meraki-mr32.dt.yaml: /: memory: False schema does not allow {'reg': [[0, 134217728]], 'device_type': ['memory']}
-arch/arm/boot/dts/bcm94708.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}
-arch/arm/boot/dts/bcm94709.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts       | 2 +-
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts       | 2 +-
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 2 +-
- arch/arm/boot/dts/bcm4709-linksys-ea9200.dts      | 2 +-
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts       | 2 +-
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts       | 2 +-
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 2 +-
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts     | 2 +-
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts        | 2 +-
- arch/arm/boot/dts/bcm94708.dts                    | 2 +-
- arch/arm/boot/dts/bcm94709.dts                    | 2 +-
- 11 files changed, 11 insertions(+), 11 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -20,7 +20,7 @@
- 		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
--	memory {
-+	memory@0 {
- 		device_type = "memory";
- 		reg = <0x00000000 0x08000000>,
- 		      <0x88000000 0x08000000>;
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -19,7 +19,7 @@
- 		bootargs = "console=ttyS0,115200";
- 	};
- 
--	memory {
-+	memory@0 {
- 		device_type = "memory";
- 		reg = <0x00000000 0x08000000>,
- 		      <0x88000000 0x08000000>;
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -19,7 +19,7 @@
- 		bootargs = "console=ttyS0,115200";
- 	};
- 
--	memory {
-+	memory@0 {
- 		device_type = "memory";
- 		reg = <0x00000000 0x08000000>,
- 		      <0x88000000 0x18000000>;
---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-@@ -16,7 +16,7 @@
- 		bootargs = "console=ttyS0,115200";
- 	};
- 
--	memory {
-+	memory@0 {
- 		device_type = "memory";
- 		reg = <0x00000000 0x08000000>,
- 		      <0x88000000 0x08000000>;
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -19,7 +19,7 @@
- 		bootargs = "console=ttyS0,115200";
- 	};
- 
--	memory {
-+	memory@0 {
- 		device_type = "memory";
- 		reg = <0x00000000 0x08000000>,
- 		      <0x88000000 0x08000000>;
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -30,7 +30,7 @@
- 		bootargs = "console=ttyS0,115200";
- 	};
- 
--	memory {
-+	memory@0 {
- 		device_type = "memory";
- 		reg = <0x00000000 0x08000000>,
- 		      <0x88000000 0x08000000>;
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -15,7 +15,7 @@
- 		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
--	memory {
-+	memory@0 {
- 		device_type = "memory";
- 		reg = <0x00000000 0x08000000>;
- 	};
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -16,7 +16,7 @@
- 		bootargs = "earlycon";
- 	};
- 
--	memory {
-+	memory@0 {
- 		device_type = "memory";
- 		reg = <0x00000000 0x08000000>,
- 		      <0x88000000 0x18000000>;
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -20,7 +20,7 @@
- 		bootargs = " console=ttyS0,115200n8 earlycon";
- 	};
- 
--	memory {
-+	memory@0 {
- 		reg = <0x00000000 0x08000000>;
- 		device_type = "memory";
- 	};
---- a/arch/arm/boot/dts/bcm94708.dts
-+++ b/arch/arm/boot/dts/bcm94708.dts
-@@ -38,7 +38,7 @@
- 	model = "NorthStar SVK (BCM94708)";
- 	compatible = "brcm,bcm94708", "brcm,bcm4708";
- 
--	memory {
-+	memory@0 {
- 		device_type = "memory";
- 		reg = <0x00000000 0x08000000>;
- 	};
---- a/arch/arm/boot/dts/bcm94709.dts
-+++ b/arch/arm/boot/dts/bcm94709.dts
-@@ -38,7 +38,7 @@
- 	model = "NorthStar SVK (BCM94709)";
- 	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
- 
--	memory {
-+	memory@0 {
- 		device_type = "memory";
- 		reg = <0x00000000 0x08000000>;
- 	};
diff --git a/target/linux/bcm53xx/patches-5.4/080-v5.13-0001-dt-bindings-nvmem-add-Broadcom-s-NVRAM.patch b/target/linux/bcm53xx/patches-5.4/080-v5.13-0001-dt-bindings-nvmem-add-Broadcom-s-NVRAM.patch
deleted file mode 100644
index 01e29aaad6..0000000000
--- a/target/linux/bcm53xx/patches-5.4/080-v5.13-0001-dt-bindings-nvmem-add-Broadcom-s-NVRAM.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From c39edb9f9dcb6c8a0ba0ebf5df9e0ac93ab94b82 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 5 Mar 2021 19:32:35 +0100
-Subject: [PATCH] dt-bindings: nvmem: add Broadcom's NVRAM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom's NVRAM structure contains device data and can be accessed
-using I/O mapping.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
----
- .../devicetree/bindings/nvmem/brcm,nvram.yaml | 34 +++++++++++++++++++
- 1 file changed, 34 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
-@@ -0,0 +1,34 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/nvmem/brcm,nvram.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom's NVRAM
-+
-+description: |
-+  Broadcom's NVRAM is a structure containing device specific environment
-+  variables. It is used for storing device configuration, booting parameters
-+  and calibration data.
-+
-+  NVRAM can be accessed on Broadcom BCM47xx MIPS and Northstar ARM Cortex-A9
-+  devices usiong I/O mapped memory.
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+allOf:
-+  - $ref: "nvmem.yaml#"
-+
-+properties:
-+  compatible:
-+    const: brcm,nvram
-+
-+unevaluatedProperties: false
-+
-+examples:
-+  - |
-+    nvram@1eff0000 {
-+            compatible = "brcm,nvram";
-+            reg = <0x1eff0000 0x10000>;
-+    };
diff --git a/target/linux/bcm53xx/patches-5.4/080-v5.13-0002-nvmem-brcm_nvram-new-driver-exposing-Broadcom-s-NVRA.patch b/target/linux/bcm53xx/patches-5.4/080-v5.13-0002-nvmem-brcm_nvram-new-driver-exposing-Broadcom-s-NVRA.patch
deleted file mode 100644
index 61def7a93d..0000000000
--- a/target/linux/bcm53xx/patches-5.4/080-v5.13-0002-nvmem-brcm_nvram-new-driver-exposing-Broadcom-s-NVRA.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From b152bbeb0282bfcf6f91d0d5befd7582c1c3fc23 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 5 Mar 2021 19:32:36 +0100
-Subject: [PATCH] nvmem: brcm_nvram: new driver exposing Broadcom's NVRAM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This driver provides access to Broadcom's NVRAM.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
----
- drivers/nvmem/Kconfig      |  9 +++++
- drivers/nvmem/Makefile     |  2 +
- drivers/nvmem/brcm_nvram.c | 78 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 89 insertions(+)
- create mode 100644 drivers/nvmem/brcm_nvram.c
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -230,4 +230,13 @@ config NVMEM_ZYNQMP
- 
- 	  If sure, say yes. If unsure, say no.
- 
-+
-+config NVMEM_BRCM_NVRAM
-+	tristate "Broadcom's NVRAM support"
-+	depends on ARCH_BCM_5301X || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	help
-+	  This driver provides support for Broadcom's NVRAM that can be accessed
-+	  using I/O mapping.
-+
- endif
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -50,3 +50,5 @@ obj-$(CONFIG_SC27XX_EFUSE)	+= nvmem-sc27
- nvmem-sc27xx-efuse-y		:= sc27xx-efuse.o
- obj-$(CONFIG_NVMEM_ZYNQMP)	+= nvmem_zynqmp_nvmem.o
- nvmem_zynqmp_nvmem-y		:= zynqmp_nvmem.o
-+obj-$(CONFIG_NVMEM_BRCM_NVRAM)	+= nvmem_brcm_nvram.o
-+nvmem_brcm_nvram-y		:= brcm_nvram.o
---- /dev/null
-+++ b/drivers/nvmem/brcm_nvram.c
-@@ -0,0 +1,78 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/io.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/platform_device.h>
-+
-+struct brcm_nvram {
-+	struct device *dev;
-+	void __iomem *base;
-+};
-+
-+static int brcm_nvram_read(void *context, unsigned int offset, void *val,
-+			   size_t bytes)
-+{
-+	struct brcm_nvram *priv = context;
-+	u8 *dst = val;
-+
-+	while (bytes--)
-+		*dst++ = readb(priv->base + offset++);
-+
-+	return 0;
-+}
-+
-+static int brcm_nvram_probe(struct platform_device *pdev)
-+{
-+	struct nvmem_config config = {
-+		.name = "brcm-nvram",
-+		.reg_read = brcm_nvram_read,
-+	};
-+	struct device *dev = &pdev->dev;
-+	struct resource *res;
-+	struct brcm_nvram *priv;
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+	priv->dev = dev;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	priv->base = devm_ioremap_resource(dev, res);
-+	if (IS_ERR(priv->base))
-+		return PTR_ERR(priv->base);
-+
-+	config.dev = dev;
-+	config.priv = priv;
-+	config.size = resource_size(res);
-+
-+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
-+}
-+
-+static const struct of_device_id brcm_nvram_of_match_table[] = {
-+	{ .compatible = "brcm,nvram", },
-+	{},
-+};
-+
-+static struct platform_driver brcm_nvram_driver = {
-+	.probe = brcm_nvram_probe,
-+	.driver = {
-+		.name = "brcm_nvram",
-+		.of_match_table = brcm_nvram_of_match_table,
-+	},
-+};
-+
-+static int __init brcm_nvram_init(void)
-+{
-+	return platform_driver_register(&brcm_nvram_driver);
-+}
-+
-+subsys_initcall_sync(brcm_nvram_init);
-+
-+MODULE_AUTHOR("Rafał Miłecki");
-+MODULE_LICENSE("GPL");
-+MODULE_DEVICE_TABLE(of, brcm_nvram_of_match_table);
diff --git a/target/linux/bcm53xx/patches-5.4/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch b/target/linux/bcm53xx/patches-5.4/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch
deleted file mode 100644
index fa86303637..0000000000
--- a/target/linux/bcm53xx/patches-5.4/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 13 Apr 2021 18:25:20 +0200
-Subject: [PATCH] mtd: parsers: trx: parse "firmware" MTD partitions only
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Parsing every partition with "compatible" set to "brcm,trx" results in
-parsing both: firmware partition and failsafe partition on devices that
-implement failsafe booting. This affects e.g. Linksys EA9500 which has:
-
-partition@200000 {
-	reg = <0x0200000 0x01d00000>;
-	compatible = "linksys,ns-firmware", "brcm,trx";
-};
-
-partition@1f00000 {
-	reg = <0x01f00000 0x01d00000>;
-	compatible = "linksys,ns-firmware", "brcm,trx";
-};
-
-Check for MTD partition name "firmware" before parsing. Recently added
-ofpart_linksys_ns.c creates "firmware" and "failsafe" depending on
-bootloader setup.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/mtd/parsers/parser_trx.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/parsers/parser_trx.c
-+++ b/drivers/mtd/parsers/parser_trx.c
-@@ -85,6 +85,10 @@ static int parser_trx_parse(struct mtd_i
- 	uint8_t curr_part = 0, i = 0;
- 	int err;
- 
-+	/* Don't parse any failsafe / backup partitions */
-+	if (strcmp(mtd->name, "firmware"))
-+		return -EINVAL;
-+
- 	parts = kcalloc(TRX_PARSER_MAX_PARTS, sizeof(struct mtd_partition),
- 			GFP_KERNEL);
- 	if (!parts)
diff --git a/target/linux/bcm53xx/patches-5.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-5.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
deleted file mode 100644
index 5469beb53f..0000000000
--- a/target/linux/bcm53xx/patches-5.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 1 Oct 2016 22:54:48 +0200
-Subject: [PATCH] usb: xhci: add support for performing fake doorbell
-
-Broadcom's Northstar XHCI controllers seem to need a special start
-procedure to work correctly. There isn't any official documentation of
-this, the problem is that controller doesn't detect any connected
-devices with default setup. Moreover connecting USB device to controller
-that doesn't run properly can cause SoC's watchdog issues.
-
-A workaround that was successfully tested on multiple devices is to
-perform a fake doorbell. This patch adds code for doing this and enables
-it on BCM4708 family.
----
- drivers/usb/host/xhci-plat.c |  6 +++++
- drivers/usb/host/xhci.c      | 63 +++++++++++++++++++++++++++++++++++++++++---
- drivers/usb/host/xhci.h      |  1 +
- 3 files changed, 67 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -77,6 +77,8 @@ static int xhci_priv_resume_quirk(struct
- static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
- {
- 	struct xhci_plat_priv *priv = xhci_to_priv(xhci);
-+	struct platform_device*pdev = to_platform_device(dev);
-+	struct device_node *node = pdev->dev.of_node;
- 
- 	/*
- 	 * As of now platform drivers don't provide MSI support so we ensure
-@@ -84,6 +86,9 @@ static void xhci_plat_quirks(struct devi
- 	 * dev struct in order to setup MSI
- 	 */
- 	xhci->quirks |= XHCI_PLAT | priv->quirks;
-+
-+	if (node && of_machine_is_compatible("brcm,bcm4708"))
-+		xhci->quirks |= XHCI_FAKE_DOORBELL;
- }
- 
- /* called during probe() after chip reset completes */
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -156,6 +156,49 @@ int xhci_start(struct xhci_hcd *xhci)
- 	return ret;
- }
- 
-+/**
-+ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot
-+ *
-+ * Some controllers require a fake doorbell to start correctly. Without that
-+ * they simply don't detect any devices.
-+ */
-+static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id)
-+{
-+	u32 temp;
-+
-+	/* Alloc a virt device for that slot */
-+	if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) {
-+		xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
-+		return -ENOMEM;
-+	}
-+
-+	/* Ring fake doorbell for slot_id ep 0 */
-+	xhci_ring_ep_doorbell(xhci, slot_id, 0, 0);
-+	usleep_range(1000, 1500);
-+
-+	/* Read the status to check if HSE is set or not */
-+	temp = readl(&xhci->op_regs->status);
-+
-+	/* Clear HSE if set */
-+	if (temp & STS_FATAL) {
-+		xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp);
-+		temp &= ~0x1fff;
-+		temp |= STS_FATAL;
-+		writel(temp, &xhci->op_regs->status);
-+		usleep_range(1000, 1500);
-+		readl(&xhci->op_regs->status);
-+	}
-+
-+	/* Free virt device */
-+	xhci_free_virt_device(xhci, slot_id);
-+
-+	/* We're done if controller is already running */
-+	if (readl(&xhci->op_regs->command) & CMD_RUN)
-+		return 0;
-+
-+	return xhci_start(xhci);
-+}
-+
- /*
-  * Reset a halted HC.
-  *
-@@ -608,10 +651,20 @@ static int xhci_init(struct usb_hcd *hcd
- 
- static int xhci_run_finished(struct xhci_hcd *xhci)
- {
--	if (xhci_start(xhci)) {
--		xhci_halt(xhci);
--		return -ENODEV;
-+	int err;
-+
-+	err = xhci_start(xhci);
-+	if (err) {
-+		err = -ENODEV;
-+		goto err_halt;
- 	}
-+
-+	if (xhci->quirks & XHCI_FAKE_DOORBELL) {
-+		err = xhci_fake_doorbell(xhci, 1);
-+		if (err)
-+			goto err_halt;
-+	}
-+
- 	xhci->shared_hcd->state = HC_STATE_RUNNING;
- 	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
- 
-@@ -621,6 +674,10 @@ static int xhci_run_finished(struct xhci
- 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- 			"Finished xhci_run for USB3 roothub");
- 	return 0;
-+
-+err_halt:
-+	xhci_halt(xhci);
-+	return err;
- }
- 
- /*
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1877,6 +1877,7 @@ struct xhci_hcd {
- #define XHCI_DEFAULT_PM_RUNTIME_ALLOW	BIT_ULL(33)
- #define XHCI_RESET_PLL_ON_DISCONNECT	BIT_ULL(34)
- #define XHCI_SNPS_BROKEN_SUSPEND    BIT_ULL(35)
-+#define XHCI_FAKE_DOORBELL	BIT_ULL(36)
- #define XHCI_SKIP_PHY_INIT	BIT_ULL(37)
- #define XHCI_DISABLE_SPARSE	BIT_ULL(38)
- #define XHCI_NO_SOFT_RETRY	BIT_ULL(40)
diff --git a/target/linux/bcm53xx/patches-5.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch b/target/linux/bcm53xx/patches-5.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
deleted file mode 100644
index 034d5b52fc..0000000000
--- a/target/linux/bcm53xx/patches-5.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 24 Sep 2014 22:14:07 +0200
-Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom devices have broken CFE (bootloader) that leaves hardware in an
-invalid state. It causes problems with booting Linux. On Northstar
-devices kernel was randomly hanging in ~25% of tries during early init.
-Hangs used to happen at random places in the start_kernel. On BCM53573
-kernel doesn't even seem to start booting.
-
-To workaround this problem we need to do following very early:
-1) Clear 2 following bits in the SCTLR register:
-#define CR_M    (1 << 0)        /* MMU enable */
-#define CR_C    (1 << 2)        /* Dcache enable */
-2) Flush the whole D-cache
-3) Disable L2 cache
-
-Unfortunately this patch is not upstreamable as it does above things
-unconditionally. We can't check if we are running on Broadcom platform
-in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable
-as it could break other devices support.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -35,6 +35,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
- OBJS		+= ll_char_wr.o font.o
- endif
- 
-+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
-+OBJS		+= head-bcm_5301x-mpcore.o
-+OBJS		+= cache-v7-min.o
-+endif
-+
- ifeq ($(CONFIG_ARCH_SA1100),y)
- OBJS		+= head-sa1100.o
- endif
---- /dev/null
-+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
-@@ -0,0 +1,37 @@
-+/*
-+ *
-+ * Platform specific tweaks.  This is merged into head.S by the linker.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/assembler.h>
-+#include <asm/cp15.h>
-+
-+		.section        ".start", "ax"
-+
-+/*
-+ * This code section is spliced into the head code by the linker
-+ */
-+
-+__plat_uncompress_start:
-+
-+	@ Preserve r8/r7 i.e. kernel entry values
-+	mov	r12, r8
-+
-+	@ Clear MMU enable and Dcache enable bits
-+	mrc	p15, 0, r0, c1, c0, 0		@ Read SCTLR
-+	bic	r0, #CR_C|CR_M
-+	mcr	p15, 0, r0, c1, c0, 0		@ Write SCTLR
-+	nop
-+
-+	@ Call the cache invalidation routine
-+	bl	v7_flush_dcache_all
-+	nop
-+	mov	r0,#0
-+	ldr	r3, =0x19022000			@ L2 cache controller, control reg
-+	str	r0, [r3, #0x100]		@ Disable L2 cache
-+	nop
-+
-+	@ Restore
-+	mov	r8, r12
---- a/arch/arm/boot/compressed/cache-v7-min.S
-+++ b/arch/arm/boot/compressed/cache-v7-min.S
-@@ -12,6 +12,7 @@
- 
- #include <linux/linkage.h>
- #include <linux/init.h>
-+#include <asm/assembler.h>
- 
- 	__INIT
- 
-@@ -63,7 +64,7 @@ loop2:
-  ARM(	orr	r11, r11, r9, lsl r2	)	@ factor index number into r11
-  THUMB(	lsl	r6, r9, r2		)
-  THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
--	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
-+	mcr     p15, 0, r11, c7, c6, 2		@ clean & invalidate by set/way
- 	subs	r9, r9, #1			@ decrement the index
- 	bge	loop2
- 	subs	r4, r4, #1			@ decrement the way
diff --git a/target/linux/bcm53xx/patches-5.4/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch b/target/linux/bcm53xx/patches-5.4/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch
deleted file mode 100644
index 8cbda68886..0000000000
--- a/target/linux/bcm53xx/patches-5.4/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] ARM: dts: BCM5301X: Update Northstar pinctrl binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -424,7 +424,7 @@
- 		#size-cells = <1>;
- 
- 		cru@100 {
--			compatible = "simple-bus";
-+			compatible = "syscon", "simple-mfd";
- 			reg = <0x100 0x1a4>;
- 			ranges;
- 			#address-cells = <1>;
-@@ -450,10 +450,9 @@
- 						     "sata1", "sata2";
- 			};
- 
--			pinctrl: pin-controller@1c0 {
-+			pinctrl: pin-controller {
- 				compatible = "brcm,bcm4708-pinmux";
--				reg = <0x1c0 0x24>;
--				reg-names = "cru_gpio_control";
-+				offset = <0xc0>;
- 
- 				spi-pins {
- 					groups = "spi_grp";
diff --git a/target/linux/bcm53xx/patches-5.4/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-5.4/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
deleted file mode 100644
index b0800e50ae..0000000000
--- a/target/linux/bcm53xx/patches-5.4/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -106,6 +106,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4709-buffalo-wxr-1900dhp.dtb \
- 	bcm4709-linksys-ea9200.dtb \
- 	bcm4709-netgear-r7000.dtb \
-+	bcm4709-netgear-r7900.dtb \
- 	bcm4709-netgear-r8000.dtb \
- 	bcm4709-tplink-archer-c9-v1.dtb \
- 	bcm47094-dlink-dir-885l.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
-@@ -0,0 +1,42 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Netgear R7900
-+ *
-+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+	compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708";
-+	model = "Netgear R7900";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x08000000>;
-+	};
-+
-+	axi@18000000 {
-+		usb3@23000 {
-+			reg = <0x00023000 0x1000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-5.4/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-5.4/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
deleted file mode 100644
index b3cb5de048..0000000000
--- a/target/linux/bcm53xx/patches-5.4/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: [PATCH] ARM: BCM5301X: Add power button for Buffalo WZR-1750DHP
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -100,6 +100,12 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
-+		power {
-+			label = "Power";
-+			linux,code = <KEY_POWER>;
-+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+		};
-+
- 		restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
diff --git a/target/linux/bcm53xx/patches-5.4/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch b/target/linux/bcm53xx/patches-5.4/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch
deleted file mode 100644
index 982a82e78d..0000000000
--- a/target/linux/bcm53xx/patches-5.4/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] ARM: dts: BCM5301X: Add serial= to the bootargs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's enough to have proper stdout-path for getting serial working but
-for some reason LEDE doesn't offer "Please press Enter to activate this
-console." unless ttyS0 is specified.
-
-This is a workaround to get serial working in LEDE.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -12,7 +12,7 @@
- 	model = "TP-LINK Archer C5 V2";
- 
- 	chosen {
--		bootargs = "earlycon";
-+		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
- 	memory@0 {
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -13,7 +13,7 @@
- 	model = "Luxul ABR-4500 V1";
- 
- 	chosen {
--		bootargs = "earlycon";
-+		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
- 	memory@0 {
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -13,7 +13,7 @@
- 	model = "Luxul XBR-4500 V1";
- 
- 	chosen {
--		bootargs = "earlycon";
-+		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
- 	memory@0 {
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -12,7 +12,7 @@
- 	model = "Luxul XAP-1440 V1";
- 
- 	chosen {
--		bootargs = "earlycon";
-+		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
- 	memory@0 {
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -12,7 +12,7 @@
- 	model = "Luxul XAP-810 V1";
- 
- 	chosen {
--		bootargs = "earlycon";
-+		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
- 	memory@0 {
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -12,7 +12,7 @@
- 	model = "Luxul XAP-1610 V1";
- 
- 	chosen {
--		bootargs = "earlycon";
-+		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
- 	memory@0 {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -13,7 +13,7 @@
- 	model = "Luxul XWR-3150 V1";
- 
- 	chosen {
--		bootargs = "earlycon";
-+		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
- 	memory@0 {
---- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-@@ -13,6 +13,10 @@
- 	compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
- 	model = "Phicomm K3";
- 
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
- 	memory@0 {
- 		device_type = "memory";
- 		reg = <0x00000000 0x08000000>,
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -13,7 +13,7 @@
- 	model = "Luxul XWC-2000 V1";
- 
- 	chosen {
--		bootargs = "earlycon";
-+		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
- 	memory@0 {
diff --git a/target/linux/bcm53xx/patches-5.4/321-ARM-dts-BCM5301X-Describe-partition-formats.patch b/target/linux/bcm53xx/patches-5.4/321-ARM-dts-BCM5301X-Describe-partition-formats.patch
deleted file mode 100644
index f2861177dd..0000000000
--- a/target/linux/bcm53xx/patches-5.4/321-ARM-dts-BCM5301X-Describe-partition-formats.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 7166207bd1d8c46d09d640d46afc685df9bb9083 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 22 Nov 2018 09:21:49 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Describe partition formats
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's needed by OpenWrt for custom partitioning.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -35,6 +35,7 @@
- 				partition@0 {
- 					label = "firmware";
- 					reg = <0x00000000 0x08000000>;
-+					compatible = "seama";
- 				};
- 			};
- 		};
diff --git a/target/linux/bcm53xx/patches-5.4/331-Meraki-MR32-Status-LEDs.patch b/target/linux/bcm53xx/patches-5.4/331-Meraki-MR32-Status-LEDs.patch
deleted file mode 100644
index fb78ee93c4..0000000000
--- a/target/linux/bcm53xx/patches-5.4/331-Meraki-MR32-Status-LEDs.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Thu, 7 Jun 2018 19:29:12 +0200
-Subject: bcm53xx: add LED status label alias for Meraki MR32
-
-add an led-status alias label. This is used by OpenWrt's LED
-DTS lookup function to identifiy the indicator LED
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -27,6 +27,7 @@
- 
- 	aliases {
- 		serial1 = &uart2;
-+		led-status = &led_status;
- 	};
- 
- 	leds {
-@@ -68,7 +69,7 @@
- 			max-brightness = <255>;
- 		};
- 
--		green {
-+		led_status: green {
- 			/* SYS-LED 1 - Tricolor */
- 			function = LED_FUNCTION_POWER;
- 			color = <LED_COLOR_ID_GREEN>;
diff --git a/target/linux/bcm53xx/patches-5.4/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-5.4/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
deleted file mode 100644
index ff9d6b0005..0000000000
--- a/target/linux/bcm53xx/patches-5.4/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 16 Oct 2014 20:52:16 +0200
-Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/ubi/attach.c | 5 +++++
- drivers/mtd/ubi/io.c     | 4 ++++
- drivers/mtd/ubi/ubi.h    | 1 +
- 3 files changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -82,6 +82,9 @@ static int self_check_ai(struct ubi_devi
- #define AV_ADD		BIT(1)
- #define AV_FIND_OR_ADD	(AV_FIND | AV_ADD)
- 
-+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */
-+bool erase_all_next;
-+
- /**
-  * find_or_add_av - internal function to find a volume, add a volume or do
-  *		    both (find and add if missing).
-@@ -1580,6 +1583,8 @@ int ubi_attach(struct ubi_device *ubi, i
- 	if (!ai)
- 		return -ENOMEM;
- 
-+	erase_all_next = false;
-+
- #ifdef CONFIG_MTD_UBI_FASTMAP
- 	/* On small flash devices we disable fastmap in any case. */
- 	if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
---- a/drivers/mtd/ubi/io.c
-+++ b/drivers/mtd/ubi/io.c
-@@ -710,6 +710,10 @@ int ubi_io_read_ec_hdr(struct ubi_device
- 	}
- 
- 	magic = be32_to_cpu(ec_hdr->magic);
-+	if (magic == 0xdeadc0de)
-+		erase_all_next = true;
-+	if (erase_all_next)
-+		return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF;
- 	if (magic != UBI_EC_HDR_MAGIC) {
- 		if (mtd_is_eccerr(read_err))
- 			return UBI_IO_BAD_HDR_EBADMSG;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -822,6 +822,7 @@ extern struct mutex ubi_devices_mutex;
- extern struct blocking_notifier_head ubi_notifiers;
- 
- /* attach.c */
-+extern bool erase_all_next;
- struct ubi_ainf_peb *ubi_alloc_aeb(struct ubi_attach_info *ai, int pnum,
- 				   int ec);
- void ubi_free_aeb(struct ubi_attach_info *ai, struct ubi_ainf_peb *aeb);
diff --git a/target/linux/bcm53xx/patches-5.4/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch b/target/linux/bcm53xx/patches-5.4/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
deleted file mode 100644
index a6d0f119ec..0000000000
--- a/target/linux/bcm53xx/patches-5.4/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 4abdde3ad6bc0b3b157c4bf6ec0bf139d11d07e8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 13 May 2015 14:13:28 +0200
-Subject: [PATCH] b53: add hacky CPU port fixes for devices not using port 5
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/net/phy/b53/b53_common.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/phy/b53/b53_common.c
-+++ b/drivers/net/phy/b53/b53_common.c
-@@ -28,6 +28,7 @@
- #include <linux/of.h>
- #include <linux/of_net.h>
- #include <linux/platform_data/b53.h>
-+#include <linux/of.h>
- 
- #include "b53_regs.h"
- #include "b53_priv.h"
-@@ -1587,6 +1588,29 @@ static int b53_switch_init(struct b53_de
- 			return ret;
- 	}
- 
-+	/* Set correct CPU port */
-+	if (of_machine_is_compatible("asus,rt-ac87u"))
-+		sw_dev->cpu_port = 7;
-+	else if (of_machine_is_compatible("netgear,r7900"))
-+		sw_dev->cpu_port = 8;
-+	else if (of_machine_is_compatible("netgear,r8000"))
-+		sw_dev->cpu_port = 8;
-+	else if (of_machine_is_compatible("netgear,r8500"))
-+		sw_dev->cpu_port = 8;
-+
-+	/* Enable extra ports */
-+	if (of_machine_is_compatible("tenda,ac9"))
-+		dev->enabled_ports |= BIT(5);
-+
-+	/*
-+	 * Workaround for devices using port 8 (connected to the 3rd iface).
-+	 * For some reason it doesn't work (no packets on eth2).
-+	 */
-+	if (of_machine_is_compatible("netgear,r7900") ||
-+	    of_machine_is_compatible("netgear,r8000") ||
-+	    (of_machine_is_compatible("linksys,panamera") && dev->chip_id == BCM53012_DEVICE_ID))
-+		sw_dev->cpu_port = 5;
-+
- 	dev->enabled_ports |= BIT(sw_dev->cpu_port);
- 	sw_dev->ports = fls(dev->enabled_ports);
- 
diff --git a/target/linux/bcm53xx/patches-5.4/800-0001-firmware-bcm47xx_nvram-support-init-from-IO-memory.patch b/target/linux/bcm53xx/patches-5.4/800-0001-firmware-bcm47xx_nvram-support-init-from-IO-memory.patch
deleted file mode 100644
index 86792d6ebf..0000000000
--- a/target/linux/bcm53xx/patches-5.4/800-0001-firmware-bcm47xx_nvram-support-init-from-IO-memory.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Mar 2021 08:24:44 +0100
-Subject: [PATCH] firmware: bcm47xx_nvram: support init from IO memory
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/firmware/broadcom/bcm47xx_nvram.c | 17 +++++++++++++++++
- include/linux/bcm47xx_nvram.h             |  6 ++++++
- 2 files changed, 23 insertions(+)
-
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -110,6 +110,23 @@ found:
- 	return 0;
- }
- 
-+int bcm47xx_nvram_init_from_iomem(void __iomem *nvram_start, size_t res_size)
-+{
-+	if (nvram_len) {
-+		pr_warn("nvram already initialized\n");
-+		return -EEXIST;
-+	}
-+
-+	if (!bcm47xx_nvram_is_valid(nvram_start)) {
-+		pr_err("No valid NVRAM found\n");
-+		return -ENOENT;
-+	}
-+
-+	bcm47xx_nvram_copy(nvram_start, res_size);
-+
-+	return 0;
-+}
-+
- /*
-  * On bcm47xx we need access to the NVRAM very early, so we can't use mtd
-  * subsystem to access flash. We can't even use platform device / driver to
---- a/include/linux/bcm47xx_nvram.h
-+++ b/include/linux/bcm47xx_nvram.h
-@@ -11,6 +11,7 @@
- #include <linux/vmalloc.h>
- 
- #ifdef CONFIG_BCM47XX_NVRAM
-+int bcm47xx_nvram_init_from_iomem(void __iomem *nvram_start, size_t res_size);
- int bcm47xx_nvram_init_from_mem(u32 base, u32 lim);
- int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len);
- int bcm47xx_nvram_gpio_pin(const char *name);
-@@ -20,6 +21,11 @@ static inline void bcm47xx_nvram_release
- 	vfree(nvram);
- };
- #else
-+static inline int bcm47xx_nvram_init_from_iomem(void __iomem *nvram_start,
-+						size_t res_size)
-+{
-+	return -ENOTSUPP;
-+}
- static inline int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
- {
- 	return -ENOTSUPP;
diff --git a/target/linux/bcm53xx/patches-5.4/800-0002-nvmem-brcm_nvram-provide-NVMEM-content-to-the-NVRAM-.patch b/target/linux/bcm53xx/patches-5.4/800-0002-nvmem-brcm_nvram-provide-NVMEM-content-to-the-NVRAM-.patch
deleted file mode 100644
index cf5952ad5f..0000000000
--- a/target/linux/bcm53xx/patches-5.4/800-0002-nvmem-brcm_nvram-provide-NVMEM-content-to-the-NVRAM-.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Mar 2021 08:26:14 +0100
-Subject: [PATCH] nvmem: brcm_nvram: provide NVMEM content to the NVRAM driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/nvmem/brcm_nvram.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/nvmem/brcm_nvram.c
-+++ b/drivers/nvmem/brcm_nvram.c
-@@ -3,6 +3,7 @@
-  * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-  */
- 
-+#include <linux/bcm47xx_nvram.h>
- #include <linux/io.h>
- #include <linux/mod_devicetable.h>
- #include <linux/module.h>
-@@ -46,6 +47,8 @@ static int brcm_nvram_probe(struct platf
- 	if (IS_ERR(priv->base))
- 		return PTR_ERR(priv->base);
- 
-+	bcm47xx_nvram_init_from_iomem(priv->base, resource_size(res));
-+
- 	config.dev = dev;
- 	config.priv = priv;
- 	config.size = resource_size(res);
diff --git a/target/linux/bcm53xx/patches-5.4/905-BCM53573-minor-hacks.patch b/target/linux/bcm53xx/patches-5.4/905-BCM53573-minor-hacks.patch
deleted file mode 100644
index 3f92f8865b..0000000000
--- a/target/linux/bcm53xx/patches-5.4/905-BCM53573-minor-hacks.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 6f1c62440eb6846cb8045d7a5480ec7bbe47c96f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Aug 2016 10:30:41 +0200
-Subject: [PATCH] BCM53573 minor hacks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -54,6 +54,7 @@
- 			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- 			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-+		clocks = <&ilp>;
- 	};
- 
- 	clocks {
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -328,14 +328,6 @@ static int bcma_register_devices(struct
- 	}
- #endif
- 
--#ifdef CONFIG_BCMA_SFLASH
--	if (bus->drv_cc.sflash.present) {
--		err = platform_device_register(&bcma_sflash_dev);
--		if (err)
--			bcma_err(bus, "Error registering serial flash\n");
--	}
--#endif
--
- #ifdef CONFIG_BCMA_NFLASH
- 	if (bus->drv_cc.nflash.present) {
- 		err = platform_device_register(&bcma_nflash_dev);
-@@ -413,6 +405,14 @@ int bcma_bus_register(struct bcma_bus *b
- 			bcma_register_core(bus, core);
- 	}
- 
-+#ifdef CONFIG_BCMA_SFLASH
-+	if (bus->drv_cc.sflash.present) {
-+		err = platform_device_register(&bcma_sflash_dev);
-+		if (err)
-+			bcma_err(bus, "Error registering serial flash\n");
-+	}
-+#endif
-+
- 	/* Try to get SPROM */
- 	err = bcma_sprom_get(bus);
- 	if (err == -ENOENT) {
---- a/drivers/clocksource/arm_arch_timer.c
-+++ b/drivers/clocksource/arm_arch_timer.c
-@@ -14,6 +14,7 @@
- #include <linux/smp.h>
- #include <linux/cpu.h>
- #include <linux/cpu_pm.h>
-+#include <linux/clk.h>
- #include <linux/clockchips.h>
- #include <linux/clocksource.h>
- #include <linux/interrupt.h>
-@@ -919,6 +920,16 @@ static void arch_timer_of_configure_rate
- 	if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate))
- 		arch_timer_rate = rate;
- 
-+	/* Get clk rate through clk driver if present */
-+	if (!arch_timer_rate) {
-+		struct clk *clk = of_clk_get(np, 0);
-+
-+		if (!IS_ERR(clk)) {
-+			if (!clk_prepare_enable(clk))
-+				arch_timer_rate = clk_get_rate(clk);
-+		}
-+	}
-+
- 	/* Check the timer frequency. */
- 	if (arch_timer_rate == 0)
- 		pr_warn("frequency not available\n");
diff --git a/target/linux/bcm63xx/config-5.4 b/target/linux/bcm63xx/config-5.4
deleted file mode 100644
index f9d095d448..0000000000
--- a/target/linux/bcm63xx/config-5.4
+++ /dev/null
@@ -1,227 +0,0 @@
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BCM6345_EXT_IRQ=y
-CONFIG_BCM6345_PERIPH_IRQ=y
-CONFIG_BCM63XX=y
-CONFIG_BCM63XX_CPU_3368=y
-CONFIG_BCM63XX_CPU_6318=y
-CONFIG_BCM63XX_CPU_63268=y
-CONFIG_BCM63XX_CPU_6328=y
-CONFIG_BCM63XX_CPU_6338=y
-CONFIG_BCM63XX_CPU_6345=y
-CONFIG_BCM63XX_CPU_6348=y
-CONFIG_BCM63XX_CPU_6358=y
-CONFIG_BCM63XX_CPU_6362=y
-CONFIG_BCM63XX_CPU_6368=y
-CONFIG_BCM63XX_EHCI=y
-CONFIG_BCM63XX_ENET=y
-CONFIG_BCM63XX_OHCI=y
-CONFIG_BCM63XX_PHY=y
-CONFIG_BCM63XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-# CONFIG_BCMA_DEBUG is not set
-# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
-# CONFIG_BCMA_DRIVER_MIPS is not set
-CONFIG_BCMA_DRIVER_PCI=y
-# CONFIG_BCMA_DRIVER_PCI_HOSTMODE is not set
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-# CONFIG_BCMA_HOST_SOC is not set
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOARD_BCM63XX_DT=y
-CONFIG_BOARD_BCM963XX=y
-CONFIG_BOARD_LIVEBOX=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_BMIPS=y
-CONFIG_CPU_BMIPS32_3300=y
-CONFIG_CPU_BMIPS4350=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_LOAD_STORE_LR=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_NO_EFFICIENT_FFS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_CPUFREQ=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_BCM63XX=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_BCM2835=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_LEDS_BCM6328=y
-CONFIG_LEDS_BCM6358=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_EXTERNAL_TIMER=y
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-CONFIG_MIPS_L1_CACHE_SHIFT_4=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_BCM63XX_PARTS=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_STAA=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_PARSER_IMAGETAG=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BCM6318=y
-CONFIG_PINCTRL_BCM63268=y
-CONFIG_PINCTRL_BCM6328=y
-CONFIG_PINCTRL_BCM6348=y
-CONFIG_PINCTRL_BCM6358=y
-CONFIG_PINCTRL_BCM6362=y
-CONFIG_PINCTRL_BCM6368=y
-CONFIG_PINCTRL_BCM63XX=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RELAY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM63XX=y
-CONFIG_SPI_BCM63XX_HSSPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-CONFIG_SWCONFIG_B53_MMAP_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-CONFIG_SWCONFIG_B53_SPI_DRIVER=y
-CONFIG_SWPHY=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_BMIPS=y
-CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
-CONFIG_SYS_HAS_CPU_BMIPS4350=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_TARGET_ISA_REV=0
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_WEAK_ORDERING=y
diff --git a/target/linux/bcm63xx/patches-5.4/010-v5.8-MIPS-BCM63xx-fix-6328-boot-selection-bit.patch b/target/linux/bcm63xx/patches-5.4/010-v5.8-MIPS-BCM63xx-fix-6328-boot-selection-bit.patch
deleted file mode 100644
index b279a53de0..0000000000
--- a/target/linux/bcm63xx/patches-5.4/010-v5.8-MIPS-BCM63xx-fix-6328-boot-selection-bit.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 2038e0416518b30bb40857fbafa3733a6bae93ca Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Tue, 26 May 2020 13:03:24 +0200
-Subject: [PATCH] MIPS: BCM63xx: fix 6328 boot selection bit
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-MISC_STRAP_BUS_BOOT_SEL_SHIFT is 18 according to Broadcom's GPL source code.
-
-Signed-off-by: �lvaro Fernández Rojas <noltari@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1367,8 +1367,8 @@
- #define MISC_STRAPBUS_6328_REG		0x240
- #define STRAPBUS_6328_FCVO_SHIFT	7
- #define STRAPBUS_6328_FCVO_MASK		(0x1f << STRAPBUS_6328_FCVO_SHIFT)
--#define STRAPBUS_6328_BOOT_SEL_SERIAL	(1 << 28)
--#define STRAPBUS_6328_BOOT_SEL_NAND	(0 << 28)
-+#define STRAPBUS_6328_BOOT_SEL_SERIAL	(1 << 18)
-+#define STRAPBUS_6328_BOOT_SEL_NAND	(0 << 18)
- 
- /*************************************************************************
-  * _REG relative to RSET_PCIE
diff --git a/target/linux/bcm63xx/patches-5.4/021-v5.8-mtd-rawnand-brcmnand-improve-hamming-oob-layout.patch b/target/linux/bcm63xx/patches-5.4/021-v5.8-mtd-rawnand-brcmnand-improve-hamming-oob-layout.patch
deleted file mode 100644
index 78fa1b39e3..0000000000
--- a/target/linux/bcm63xx/patches-5.4/021-v5.8-mtd-rawnand-brcmnand-improve-hamming-oob-layout.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From d00358d7a1c50718232799e1ee10955bcd73795a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Tue, 12 May 2020 09:57:33 +0200
-Subject: [PATCH] mtd: rawnand: brcmnand: improve hamming oob layout
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The current code generates 8 oob sections:
-S1	1-5
-ECC	6-8
-S2	9-15
-S3	16-21
-ECC	22-24
-S4	25-31
-S5	32-37
-ECC	38-40
-S6	41-47
-S7	48-53
-ECC	54-56
-S8	57-63
-
-Change it by merging continuous sections:
-S1	1-5
-ECC	6-8
-S2	9-21
-ECC	22-24
-S3	25-37
-ECC	38-40
-S4	41-53
-ECC	54-56
-S5	57-63
-
-Signed-off-by: �lvaro Fernández Rojas <noltari@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20200512075733.745374-3-noltari@gmail.com
----
- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 35 +++++++++++-------------
- 1 file changed, 16 insertions(+), 19 deletions(-)
-
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -1004,33 +1004,30 @@ static int brcmnand_hamming_ooblayout_fr
- 	struct brcmnand_cfg *cfg = &host->hwcfg;
- 	int sas = cfg->spare_area_size << cfg->sector_size_1k;
- 	int sectors = cfg->page_size / (512 << cfg->sector_size_1k);
-+	u32 next;
- 
--	if (section >= sectors * 2)
-+	if (section > sectors)
- 		return -ERANGE;
- 
--	oobregion->offset = (section / 2) * sas;
-+	next = (section * sas);
-+	if (section < sectors)
-+		next += 6;
- 
--	if (section & 1) {
--		oobregion->offset += 9;
--		oobregion->length = 7;
-+	if (section) {
-+		oobregion->offset = ((section - 1) * sas) + 9;
- 	} else {
--		oobregion->length = 6;
--
--		/* First sector of each page may have BBI */
--		if (!section) {
--			/*
--			 * Small-page NAND use byte 6 for BBI while large-page
--			 * NAND use bytes 0 and 1.
--			 */
--			if (cfg->page_size > 512) {
--				oobregion->offset += 2;
--				oobregion->length -= 2;
--			} else {
--				oobregion->length--;
--			}
-+		if (cfg->page_size > 512) {
-+			/* Large page NAND uses first 2 bytes for BBI */
-+			oobregion->offset = 2;
-+		} else {
-+			/* Small page NAND uses last byte before ECC for BBI */
-+			oobregion->offset = 0;
-+			next--;
- 		}
- 	}
- 
-+	oobregion->length = next - oobregion->offset;
-+
- 	return 0;
- }
- 
diff --git a/target/linux/bcm63xx/patches-5.4/023-v5.8-mtd-rawnand-brcmnand-rename-v4-registers.patch b/target/linux/bcm63xx/patches-5.4/023-v5.8-mtd-rawnand-brcmnand-rename-v4-registers.patch
deleted file mode 100644
index 0c956b36d1..0000000000
--- a/target/linux/bcm63xx/patches-5.4/023-v5.8-mtd-rawnand-brcmnand-rename-v4-registers.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 4fd639092b17d4252368b6009573339aeab5c7bd Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Fri, 22 May 2020 14:15:20 +0200
-Subject: [PATCH] mtd: rawnand: brcmnand: rename v4 registers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-These registers are also used on v3.3.
-
-Signed-off-by: �lvaro Fernández Rojas <noltari@gmail.com>
-Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-2-noltari@gmail.com
----
- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -269,8 +269,8 @@ enum brcmnand_reg {
- 	BRCMNAND_FC_BASE,
- };
- 
--/* BRCMNAND v4.0 */
--static const u16 brcmnand_regs_v40[] = {
-+/* BRCMNAND v3.3-v4.0 */
-+static const u16 brcmnand_regs_v33[] = {
- 	[BRCMNAND_CMD_START]		=  0x04,
- 	[BRCMNAND_CMD_EXT_ADDRESS]	=  0x08,
- 	[BRCMNAND_CMD_ADDRESS]		=  0x0c,
-@@ -522,8 +522,8 @@ static int brcmnand_revision_init(struct
- 		ctrl->reg_offsets = brcmnand_regs_v60;
- 	else if (ctrl->nand_version >= 0x0500)
- 		ctrl->reg_offsets = brcmnand_regs_v50;
--	else if (ctrl->nand_version >= 0x0400)
--		ctrl->reg_offsets = brcmnand_regs_v40;
-+	else if (ctrl->nand_version >= 0x0303)
-+		ctrl->reg_offsets = brcmnand_regs_v33;
- 
- 	/* Chip-select stride */
- 	if (ctrl->nand_version >= 0x0701)
diff --git a/target/linux/bcm63xx/patches-5.4/025-v5.8-mtd-rawnand-brcmnand-rename-page-sizes.patch b/target/linux/bcm63xx/patches-5.4/025-v5.8-mtd-rawnand-brcmnand-rename-page-sizes.patch
deleted file mode 100644
index 5671bce397..0000000000
--- a/target/linux/bcm63xx/patches-5.4/025-v5.8-mtd-rawnand-brcmnand-rename-page-sizes.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From eeeac9cbc4ca5b8c245972f3a765d1cb5b7ef038 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Fri, 22 May 2020 14:15:22 +0200
-Subject: [PATCH] mtd: rawnand: brcmnand: rename page sizes
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Current pages sizes apply to controllers after v3.4
-
-Signed-off-by: �lvaro Fernández Rojas <noltari@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-4-noltari@gmail.com
----
- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -502,7 +502,7 @@ static int brcmnand_revision_init(struct
- {
- 	static const unsigned int block_sizes_v6[] = { 8, 16, 128, 256, 512, 1024, 2048, 0 };
- 	static const unsigned int block_sizes_v4[] = { 16, 128, 8, 512, 256, 1024, 2048, 0 };
--	static const unsigned int page_sizes[] = { 512, 2048, 4096, 8192, 0 };
-+	static const unsigned int page_sizes_v3_4[] = { 512, 2048, 4096, 8192, 0 };
- 
- 	ctrl->nand_version = nand_readreg(ctrl, 0) & 0xffff;
- 
-@@ -549,7 +549,7 @@ static int brcmnand_revision_init(struct
- 		ctrl->max_page_size = 16 * 1024;
- 		ctrl->max_block_size = 2 * 1024 * 1024;
- 	} else {
--		ctrl->page_sizes = page_sizes;
-+		ctrl->page_sizes = page_sizes_v3_4;
- 		if (ctrl->nand_version >= 0x0600)
- 			ctrl->block_sizes = block_sizes_v6;
- 		else
diff --git a/target/linux/bcm63xx/patches-5.4/026-v5.8-mtd-rawnand-brcmnand-support-v2.1-v2.2-controllers.patch b/target/linux/bcm63xx/patches-5.4/026-v5.8-mtd-rawnand-brcmnand-support-v2.1-v2.2-controllers.patch
deleted file mode 100644
index fe86584d0d..0000000000
--- a/target/linux/bcm63xx/patches-5.4/026-v5.8-mtd-rawnand-brcmnand-support-v2.1-v2.2-controllers.patch
+++ /dev/null
@@ -1,194 +0,0 @@
-From 7e7c7df5d50fe06469be106967fc5b5d62be8868 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Fri, 22 May 2020 14:15:24 +0200
-Subject: [PATCH] mtd: rawnand: brcmnand: support v2.1-v2.2 controllers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-v2.1: tested on Netgear DGND3700v1 (BCM6368)
-v2.2: tested on Netgear DGND3700v2 (BCM6362)
-
-Signed-off-by: �lvaro Fernández Rojas <noltari@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-6-noltari@gmail.com
----
- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 85 +++++++++++++++++++++---
- 1 file changed, 76 insertions(+), 9 deletions(-)
-
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -196,6 +196,7 @@ struct brcmnand_controller {
- 	const unsigned int	*block_sizes;
- 	unsigned int		max_page_size;
- 	const unsigned int	*page_sizes;
-+	unsigned int		page_size_shift;
- 	unsigned int		max_oob;
- 	u32			features;
- 
-@@ -269,6 +270,36 @@ enum brcmnand_reg {
- 	BRCMNAND_FC_BASE,
- };
- 
-+/* BRCMNAND v2.1-v2.2 */
-+static const u16 brcmnand_regs_v21[] = {
-+	[BRCMNAND_CMD_START]		=  0x04,
-+	[BRCMNAND_CMD_EXT_ADDRESS]	=  0x08,
-+	[BRCMNAND_CMD_ADDRESS]		=  0x0c,
-+	[BRCMNAND_INTFC_STATUS]		=  0x5c,
-+	[BRCMNAND_CS_SELECT]		=  0x14,
-+	[BRCMNAND_CS_XOR]		=  0x18,
-+	[BRCMNAND_LL_OP]		=     0,
-+	[BRCMNAND_CS0_BASE]		=  0x40,
-+	[BRCMNAND_CS1_BASE]		=     0,
-+	[BRCMNAND_CORR_THRESHOLD]	=     0,
-+	[BRCMNAND_CORR_THRESHOLD_EXT]	=     0,
-+	[BRCMNAND_UNCORR_COUNT]		=     0,
-+	[BRCMNAND_CORR_COUNT]		=     0,
-+	[BRCMNAND_CORR_EXT_ADDR]	=  0x60,
-+	[BRCMNAND_CORR_ADDR]		=  0x64,
-+	[BRCMNAND_UNCORR_EXT_ADDR]	=  0x68,
-+	[BRCMNAND_UNCORR_ADDR]		=  0x6c,
-+	[BRCMNAND_SEMAPHORE]		=  0x50,
-+	[BRCMNAND_ID]			=  0x54,
-+	[BRCMNAND_ID_EXT]		=     0,
-+	[BRCMNAND_LL_RDATA]		=     0,
-+	[BRCMNAND_OOB_READ_BASE]	=  0x20,
-+	[BRCMNAND_OOB_READ_10_BASE]	=     0,
-+	[BRCMNAND_OOB_WRITE_BASE]	=  0x30,
-+	[BRCMNAND_OOB_WRITE_10_BASE]	=     0,
-+	[BRCMNAND_FC_BASE]		= 0x200,
-+};
-+
- /* BRCMNAND v3.3-v4.0 */
- static const u16 brcmnand_regs_v33[] = {
- 	[BRCMNAND_CMD_START]		=  0x04,
-@@ -467,6 +498,9 @@ enum {
- 	CFG_BUS_WIDTH			= BIT(CFG_BUS_WIDTH_SHIFT),
- 	CFG_DEVICE_SIZE_SHIFT		= 24,
- 
-+	/* Only for v2.1 */
-+	CFG_PAGE_SIZE_SHIFT_v2_1	= 30,
-+
- 	/* Only for pre-v7.1 (with no CFG_EXT register) */
- 	CFG_PAGE_SIZE_SHIFT		= 20,
- 	CFG_BLK_SIZE_SHIFT		= 28,
-@@ -502,12 +536,16 @@ static int brcmnand_revision_init(struct
- {
- 	static const unsigned int block_sizes_v6[] = { 8, 16, 128, 256, 512, 1024, 2048, 0 };
- 	static const unsigned int block_sizes_v4[] = { 16, 128, 8, 512, 256, 1024, 2048, 0 };
-+	static const unsigned int block_sizes_v2_2[] = { 16, 128, 8, 512, 256, 0 };
-+	static const unsigned int block_sizes_v2_1[] = { 16, 128, 8, 512, 0 };
- 	static const unsigned int page_sizes_v3_4[] = { 512, 2048, 4096, 8192, 0 };
-+	static const unsigned int page_sizes_v2_2[] = { 512, 2048, 4096, 0 };
-+	static const unsigned int page_sizes_v2_1[] = { 512, 2048, 0 };
- 
- 	ctrl->nand_version = nand_readreg(ctrl, 0) & 0xffff;
- 
--	/* Only support v4.0+? */
--	if (ctrl->nand_version < 0x0400) {
-+	/* Only support v2.1+ */
-+	if (ctrl->nand_version < 0x0201) {
- 		dev_err(ctrl->dev, "version %#x not supported\n",
- 			ctrl->nand_version);
- 		return -ENODEV;
-@@ -524,6 +562,8 @@ static int brcmnand_revision_init(struct
- 		ctrl->reg_offsets = brcmnand_regs_v50;
- 	else if (ctrl->nand_version >= 0x0303)
- 		ctrl->reg_offsets = brcmnand_regs_v33;
-+	else if (ctrl->nand_version >= 0x0201)
-+		ctrl->reg_offsets = brcmnand_regs_v21;
- 
- 	/* Chip-select stride */
- 	if (ctrl->nand_version >= 0x0701)
-@@ -549,14 +589,32 @@ static int brcmnand_revision_init(struct
- 		ctrl->max_page_size = 16 * 1024;
- 		ctrl->max_block_size = 2 * 1024 * 1024;
- 	} else {
--		ctrl->page_sizes = page_sizes_v3_4;
-+		if (ctrl->nand_version >= 0x0304)
-+			ctrl->page_sizes = page_sizes_v3_4;
-+		else if (ctrl->nand_version >= 0x0202)
-+			ctrl->page_sizes = page_sizes_v2_2;
-+		else
-+			ctrl->page_sizes = page_sizes_v2_1;
-+
-+		if (ctrl->nand_version >= 0x0202)
-+			ctrl->page_size_shift = CFG_PAGE_SIZE_SHIFT;
-+		else
-+			ctrl->page_size_shift = CFG_PAGE_SIZE_SHIFT_v2_1;
-+
- 		if (ctrl->nand_version >= 0x0600)
- 			ctrl->block_sizes = block_sizes_v6;
--		else
-+		else if (ctrl->nand_version >= 0x0400)
- 			ctrl->block_sizes = block_sizes_v4;
-+		else if (ctrl->nand_version >= 0x0202)
-+			ctrl->block_sizes = block_sizes_v2_2;
-+		else
-+			ctrl->block_sizes = block_sizes_v2_1;
- 
- 		if (ctrl->nand_version < 0x0400) {
--			ctrl->max_page_size = 4096;
-+			if (ctrl->nand_version < 0x0202)
-+				ctrl->max_page_size = 2048;
-+			else
-+				ctrl->max_page_size = 4096;
- 			ctrl->max_block_size = 512 * 1024;
- 		}
- 	}
-@@ -724,6 +782,9 @@ static void brcmnand_wr_corr_thresh(stru
- 	enum brcmnand_reg reg = BRCMNAND_CORR_THRESHOLD;
- 	int cs = host->cs;
- 
-+	if (!ctrl->reg_offsets[reg])
-+		return;
-+
- 	if (ctrl->nand_version == 0x0702)
- 		bits = 7;
- 	else if (ctrl->nand_version >= 0x0600)
-@@ -782,8 +843,10 @@ static inline u32 brcmnand_spare_area_ma
- 		return GENMASK(7, 0);
- 	else if (ctrl->nand_version >= 0x0600)
- 		return GENMASK(6, 0);
--	else
-+	else if (ctrl->nand_version >= 0x0303)
- 		return GENMASK(5, 0);
-+	else
-+		return GENMASK(4, 0);
- }
- 
- #define NAND_ACC_CONTROL_ECC_SHIFT	16
-@@ -2146,7 +2209,7 @@ static int brcmnand_set_cfg(struct brcmn
- 		(!!(cfg->device_width == 16) << CFG_BUS_WIDTH_SHIFT) |
- 		(device_size << CFG_DEVICE_SIZE_SHIFT);
- 	if (cfg_offs == cfg_ext_offs) {
--		tmp |= (page_size << CFG_PAGE_SIZE_SHIFT) |
-+		tmp |= (page_size << ctrl->page_size_shift) |
- 		       (block_size << CFG_BLK_SIZE_SHIFT);
- 		nand_writereg(ctrl, cfg_offs, tmp);
- 	} else {
-@@ -2158,9 +2221,11 @@ static int brcmnand_set_cfg(struct brcmn
- 
- 	tmp = nand_readreg(ctrl, acc_control_offs);
- 	tmp &= ~brcmnand_ecc_level_mask(ctrl);
--	tmp |= cfg->ecc_level << NAND_ACC_CONTROL_ECC_SHIFT;
- 	tmp &= ~brcmnand_spare_area_mask(ctrl);
--	tmp |= cfg->spare_area_size;
-+	if (ctrl->nand_version >= 0x0302) {
-+		tmp |= cfg->ecc_level << NAND_ACC_CONTROL_ECC_SHIFT;
-+		tmp |= cfg->spare_area_size;
-+	}
- 	nand_writereg(ctrl, acc_control_offs, tmp);
- 
- 	brcmnand_set_sector_size_1k(host, cfg->sector_size_1k);
-@@ -2530,6 +2595,8 @@ const struct dev_pm_ops brcmnand_pm_ops
- EXPORT_SYMBOL_GPL(brcmnand_pm_ops);
- 
- static const struct of_device_id brcmnand_of_match[] = {
-+	{ .compatible = "brcm,brcmnand-v2.1" },
-+	{ .compatible = "brcm,brcmnand-v2.2" },
- 	{ .compatible = "brcm,brcmnand-v4.0" },
- 	{ .compatible = "brcm,brcmnand-v5.0" },
- 	{ .compatible = "brcm,brcmnand-v6.0" },
diff --git a/target/linux/bcm63xx/patches-5.4/030-v5.9-leds-bcm6328-support-second-hw-blinking-interval.patch b/target/linux/bcm63xx/patches-5.4/030-v5.9-leds-bcm6328-support-second-hw-blinking-interval.patch
deleted file mode 100644
index 9bf6b0fc87..0000000000
--- a/target/linux/bcm63xx/patches-5.4/030-v5.9-leds-bcm6328-support-second-hw-blinking-interval.patch
+++ /dev/null
@@ -1,188 +0,0 @@
-From e190f57df3c7e7713687905c14e72fbcbd81c5e4 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Thu, 4 Jun 2020 15:59:05 +0200
-Subject: [PATCH] leds-bcm6328: support second hw blinking interval
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Right now the driver uses only 3 LED modes:
-0: On
-1: HW Blinking (Interval 1)
-3: Off
-
-However, the controller supports a second HW blinking interval, which results
-in 4 possible LED modes:
-0: On
-1: HW Blinking (Interval 1)
-2: HW Blinking (Interval 2)
-3: Off
-
-Signed-off-by: �lvaro Fernández Rojas <noltari@gmail.com>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/leds-bcm6328.c | 97 ++++++++++++++++++++++++++++---------
- 1 file changed, 75 insertions(+), 22 deletions(-)
-
---- a/drivers/leds/leds-bcm6328.c
-+++ b/drivers/leds/leds-bcm6328.c
-@@ -24,12 +24,17 @@
- 
- #define BCM6328_LED_MAX_COUNT		24
- #define BCM6328_LED_DEF_DELAY		500
--#define BCM6328_LED_INTERVAL_MS		20
- 
--#define BCM6328_LED_INTV_MASK		0x3f
--#define BCM6328_LED_FAST_INTV_SHIFT	6
--#define BCM6328_LED_FAST_INTV_MASK	(BCM6328_LED_INTV_MASK << \
--					 BCM6328_LED_FAST_INTV_SHIFT)
-+#define BCM6328_LED_BLINK_DELAYS	2
-+#define BCM6328_LED_BLINK_MS		20
-+
-+#define BCM6328_LED_BLINK_MASK		0x3f
-+#define BCM6328_LED_BLINK1_SHIFT	0
-+#define BCM6328_LED_BLINK1_MASK		(BCM6328_LED_BLINK_MASK << \
-+					 BCM6328_LED_BLINK1_SHIFT)
-+#define BCM6328_LED_BLINK2_SHIFT	6
-+#define BCM6328_LED_BLINK2_MASK		(BCM6328_LED_BLINK_MASK << \
-+					 BCM6328_LED_BLINK2_SHIFT)
- #define BCM6328_SERIAL_LED_EN		BIT(12)
- #define BCM6328_SERIAL_LED_MUX		BIT(13)
- #define BCM6328_SERIAL_LED_CLK_NPOL	BIT(14)
-@@ -45,8 +50,8 @@
- 
- #define BCM6328_LED_MODE_MASK		3
- #define BCM6328_LED_MODE_ON		0
--#define BCM6328_LED_MODE_FAST		1
--#define BCM6328_LED_MODE_BLINK		2
-+#define BCM6328_LED_MODE_BLINK1		1
-+#define BCM6328_LED_MODE_BLINK2		2
- #define BCM6328_LED_MODE_OFF		3
- #define BCM6328_LED_SHIFT(X)		((X) << 1)
- 
-@@ -127,12 +132,18 @@ static void bcm6328_led_set(struct led_c
- 	unsigned long flags;
- 
- 	spin_lock_irqsave(led->lock, flags);
--	*(led->blink_leds) &= ~BIT(led->pin);
-+
-+	/* Remove LED from cached HW blinking intervals */
-+	led->blink_leds[0] &= ~BIT(led->pin);
-+	led->blink_leds[1] &= ~BIT(led->pin);
-+
-+	/* Set LED on/off */
- 	if ((led->active_low && value == LED_OFF) ||
- 	    (!led->active_low && value != LED_OFF))
- 		bcm6328_led_mode(led, BCM6328_LED_MODE_ON);
- 	else
- 		bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);
-+
- 	spin_unlock_irqrestore(led->lock, flags);
- }
- 
-@@ -140,8 +151,8 @@ static unsigned long bcm6328_blink_delay
- {
- 	unsigned long bcm6328_delay;
- 
--	bcm6328_delay = delay + BCM6328_LED_INTERVAL_MS / 2;
--	bcm6328_delay = bcm6328_delay / BCM6328_LED_INTERVAL_MS;
-+	bcm6328_delay = delay + BCM6328_LED_BLINK_MS / 2;
-+	bcm6328_delay = bcm6328_delay / BCM6328_LED_BLINK_MS;
- 	if (bcm6328_delay == 0)
- 		bcm6328_delay = 1;
- 
-@@ -168,28 +179,68 @@ static int bcm6328_blink_set(struct led_
- 		return -EINVAL;
- 	}
- 
--	if (delay > BCM6328_LED_INTV_MASK) {
-+	if (delay > BCM6328_LED_BLINK_MASK) {
- 		dev_dbg(led_cdev->dev,
- 			"fallback to soft blinking (delay > %ums)\n",
--			BCM6328_LED_INTV_MASK * BCM6328_LED_INTERVAL_MS);
-+			BCM6328_LED_BLINK_MASK * BCM6328_LED_BLINK_MS);
- 		return -EINVAL;
- 	}
- 
- 	spin_lock_irqsave(led->lock, flags);
--	if (*(led->blink_leds) == 0 ||
--	    *(led->blink_leds) == BIT(led->pin) ||
--	    *(led->blink_delay) == delay) {
-+	/*
-+	 * Check if any of the two configurable HW blinking intervals is
-+	 * available:
-+	 *   1. No LEDs assigned to the HW blinking interval.
-+	 *   2. Only this LED is assigned to the HW blinking interval.
-+	 *   3. LEDs with the same delay assigned.
-+	 */
-+	if (led->blink_leds[0] == 0 ||
-+	    led->blink_leds[0] == BIT(led->pin) ||
-+	    led->blink_delay[0] == delay) {
- 		unsigned long val;
- 
--		*(led->blink_leds) |= BIT(led->pin);
--		*(led->blink_delay) = delay;
-+		/* Add LED to the first HW blinking interval cache */
-+		led->blink_leds[0] |= BIT(led->pin);
-+
-+		/* Remove LED from the second HW blinking interval cache */
-+		led->blink_leds[1] &= ~BIT(led->pin);
- 
-+		/* Cache first HW blinking interval delay */
-+		led->blink_delay[0] = delay;
-+
-+		/* Update the delay for the first HW blinking interval */
- 		val = bcm6328_led_read(led->mem + BCM6328_REG_INIT);
--		val &= ~BCM6328_LED_FAST_INTV_MASK;
--		val |= (delay << BCM6328_LED_FAST_INTV_SHIFT);
-+		val &= ~BCM6328_LED_BLINK1_MASK;
-+		val |= (delay << BCM6328_LED_BLINK1_SHIFT);
- 		bcm6328_led_write(led->mem + BCM6328_REG_INIT, val);
- 
--		bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK);
-+		/* Set the LED to first HW blinking interval */
-+		bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK1);
-+
-+		rc = 0;
-+	} else if (led->blink_leds[1] == 0 ||
-+		   led->blink_leds[1] == BIT(led->pin) ||
-+		   led->blink_delay[1] == delay) {
-+		unsigned long val;
-+
-+		/* Remove LED from the first HW blinking interval */
-+		led->blink_leds[0] &= ~BIT(led->pin);
-+
-+		/* Add LED to the second HW blinking interval */
-+		led->blink_leds[1] |= BIT(led->pin);
-+
-+		/* Cache second HW blinking interval delay */
-+		led->blink_delay[1] = delay;
-+
-+		/* Update the delay for the second HW blinking interval */
-+		val = bcm6328_led_read(led->mem + BCM6328_REG_INIT);
-+		val &= ~BCM6328_LED_BLINK2_MASK;
-+		val |= (delay << BCM6328_LED_BLINK2_SHIFT);
-+		bcm6328_led_write(led->mem + BCM6328_REG_INIT, val);
-+
-+		/* Set the LED to second HW blinking interval */
-+		bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK2);
-+
- 		rc = 0;
- 	} else {
- 		dev_dbg(led_cdev->dev,
-@@ -363,11 +414,13 @@ static int bcm6328_leds_probe(struct pla
- 	if (!lock)
- 		return -ENOMEM;
- 
--	blink_leds = devm_kzalloc(dev, sizeof(*blink_leds), GFP_KERNEL);
-+	blink_leds = devm_kcalloc(dev, BCM6328_LED_BLINK_DELAYS,
-+				  sizeof(*blink_leds), GFP_KERNEL);
- 	if (!blink_leds)
- 		return -ENOMEM;
- 
--	blink_delay = devm_kzalloc(dev, sizeof(*blink_delay), GFP_KERNEL);
-+	blink_delay = devm_kcalloc(dev, BCM6328_LED_BLINK_DELAYS,
-+				   sizeof(*blink_delay), GFP_KERNEL);
- 	if (!blink_delay)
- 		return -ENOMEM;
- 
diff --git a/target/linux/bcm63xx/patches-5.4/031-v5.9-MIPS-BCM63xx-add-endif-comments.patch b/target/linux/bcm63xx/patches-5.4/031-v5.9-MIPS-BCM63xx-add-endif-comments.patch
deleted file mode 100644
index bb56363e39..0000000000
--- a/target/linux/bcm63xx/patches-5.4/031-v5.9-MIPS-BCM63xx-add-endif-comments.patch
+++ /dev/null
@@ -1,155 +0,0 @@
-From c425423a075718eac625c78351fa5907d4f3a9de Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Mon, 8 Jun 2020 12:18:28 +0200
-Subject: [PATCH] MIPS: BCM63xx: add endif comments
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are plenty of ifdefs in board_bcm963xx.c without endif comments.
-Let's make the code easier to follow by adding proper comments.
-
-Signed-off-by: �lvaro Fernández Rojas <noltari@gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 33 +++++++++++------------
- 1 file changed, 15 insertions(+), 18 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -67,7 +67,7 @@ static struct board_info __initdata boar
- 	.ephy_reset_gpio		= 36,
- 	.ephy_reset_gpio_flags		= GPIOF_INIT_HIGH,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_3368 */
- 
- /*
-  * known 6328 boards
-@@ -115,7 +115,7 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6328 */
- 
- /*
-  * known 6338 boards
-@@ -204,7 +204,7 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6338 */
- 
- /*
-  * known 6345 boards
-@@ -216,7 +216,7 @@ static struct board_info __initdata boar
- 
- 	.has_uart0			= 1,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6345 */
- 
- /*
-  * known 6348 boards
-@@ -464,7 +464,6 @@ static struct board_info __initdata boar
- 	},
- };
- 
--
- static struct board_info __initdata board_DV201AMR = {
- 	.name				= "DV201AMR",
- 	.expected_cpu_id		= 0x6348,
-@@ -505,7 +504,7 @@ static struct board_info __initdata boar
- 
- 	.has_ohci0 = 1,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6348 */
- 
- /*
-  * known 6358 boards
-@@ -530,7 +529,6 @@ static struct board_info __initdata boar
- 		.force_duplex_full	= 1,
- 	},
- 
--
- 	.has_ohci0 = 1,
- 	.has_pccard = 1,
- 	.has_ehci0 = 1,
-@@ -654,7 +652,7 @@ static struct board_info __initdata boar
- 
- 	.has_ohci0			= 1,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6358 */
- 
- /*
-  * all boards
-@@ -662,17 +660,17 @@ static struct board_info __initdata boar
- static const struct board_info __initconst *bcm963xx_boards[] = {
- #ifdef CONFIG_BCM63XX_CPU_3368
- 	&board_cvg834g,
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_3368 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- 	&board_96328avng,
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6328 */
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	&board_96338gw,
- 	&board_96338w,
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6338 */
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	&board_96345gw2,
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6345 */
- #ifdef CONFIG_BCM63XX_CPU_6348
- 	&board_96348r,
- 	&board_96348gw,
-@@ -682,14 +680,13 @@ static const struct board_info __initcon
- 	&board_DV201AMR,
- 	&board_96348gw_a,
- 	&board_rta1025w_16,
--#endif
--
-+#endif /* CONFIG_BCM63XX_CPU_6348 */
- #ifdef CONFIG_BCM63XX_CPU_6358
- 	&board_96358vw,
- 	&board_96358vw2,
- 	&board_AGPFS0,
- 	&board_DWVS0,
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6358 */
- };
- 
- /*
-@@ -728,7 +725,7 @@ int bcm63xx_get_fallback_sprom(struct ss
- 		return -EINVAL;
- 	}
- }
--#endif
-+#endif /* CONFIG_SSB_PCIHOST */
- 
- /*
-  * return board name for /proc/cpuinfo
-@@ -807,7 +804,7 @@ void __init board_prom_init(void)
- 		if (BCMCPU_IS_6348())
- 			val |= GPIO_MODE_6348_G2_PCI;
- 	}
--#endif
-+#endif /* CONFIG_PCI */
- 
- 	if (board.has_pccard) {
- 		if (BCMCPU_IS_6348())
-@@ -892,7 +889,7 @@ int __init board_register_devices(void)
- 				&bcm63xx_get_fallback_sprom) < 0)
- 			pr_err("failed to register fallback SPROM\n");
- 	}
--#endif
-+#endif /* CONFIG_SSB_PCIHOST */
- 
- 	bcm63xx_spi_register();
- 
diff --git a/target/linux/bcm63xx/patches-5.4/032-v5.9-MIPS-BCM63xx-improve-CFE-version-detection.patch b/target/linux/bcm63xx/patches-5.4/032-v5.9-MIPS-BCM63xx-improve-CFE-version-detection.patch
deleted file mode 100644
index 1daa3e6149..0000000000
--- a/target/linux/bcm63xx/patches-5.4/032-v5.9-MIPS-BCM63xx-improve-CFE-version-detection.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From e27e1cc9d360a347dbd5a398e9df21cfb4e60e3c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Mon, 8 Jun 2020 11:28:35 +0200
-Subject: [PATCH] MIPS: BCM63xx: improve CFE version detection
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are some CFE variants that start with 'cfe-vd' instead of 'cfe-v', such
-as the one used in the Huawei HG556a: "cfe-vd081.5003". In this case, the CFE
-version is stored as is (string vs number bytes).
-
-Some newer devices have an additional version number, such as the Comtrend
-VR-3032u: "1.0.38-112.118-11".
-
-Finally, print the string as is if the version doesn't start with "cfe-v" or
-"cfe-vd", but starts with "cfe-".
-
-Signed-off-by: �lvaro Fernández Rojas <noltari@gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 22 ++++++++++++++++++----
- 1 file changed, 18 insertions(+), 4 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -760,11 +760,25 @@ void __init board_prom_init(void)
- 
- 	/* dump cfe version */
- 	cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
--	if (!memcmp(cfe, "cfe-v", 5))
--		snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
--			 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
--	else
-+	if (strstarts(cfe, "cfe-")) {
-+		if(cfe[4] == 'v') {
-+			if(cfe[5] == 'd')
-+				snprintf(cfe_version, 11, "%s",
-+					 (char *) &cfe[5]);
-+			else if (cfe[10] > 0)
-+				snprintf(cfe_version, sizeof(cfe_version),
-+					 "%u.%u.%u-%u.%u-%u", cfe[5], cfe[6],
-+					 cfe[7], cfe[8], cfe[9], cfe[10]);
-+			else
-+				snprintf(cfe_version, sizeof(cfe_version),
-+					 "%u.%u.%u-%u.%u", cfe[5], cfe[6],
-+					 cfe[7], cfe[8], cfe[9]);
-+		} else {
-+			snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
-+		}
-+	} else {
- 		strcpy(cfe_version, "unknown");
-+	}
- 	pr_info("CFE version: %s\n", cfe_version);
- 
- 	bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
diff --git a/target/linux/bcm63xx/patches-5.4/033-v5.9-mtd-parsers-bcm63xx-simplify-CFE-detection.patch b/target/linux/bcm63xx/patches-5.4/033-v5.9-mtd-parsers-bcm63xx-simplify-CFE-detection.patch
deleted file mode 100644
index ff1f30cb9b..0000000000
--- a/target/linux/bcm63xx/patches-5.4/033-v5.9-mtd-parsers-bcm63xx-simplify-CFE-detection.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 91e81150d38842b58133ce1a5d70c88e8f1cf7c1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Mon, 15 Jun 2020 11:17:40 +0200
-Subject: [PATCH] mtd: parsers: bcm63xx: simplify CFE detection
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Instead of trying to parse CFE version string, which is customized by some
-vendors, let's just check that "CFE1" was passed on argument 3.
-
-Signed-off-by: �lvaro Fernández Rojas <noltari@gmail.com>
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20200615091740.2958303-1-noltari@gmail.com
----
- drivers/mtd/parsers/bcm63xxpart.c | 32 ++++++++++++-------------------
- 1 file changed, 12 insertions(+), 20 deletions(-)
-
---- a/drivers/mtd/parsers/bcm63xxpart.c
-+++ b/drivers/mtd/parsers/bcm63xxpart.c
-@@ -22,6 +22,11 @@
- #include <linux/mtd/partitions.h>
- #include <linux/of.h>
- 
-+#ifdef CONFIG_MIPS
-+#include <asm/bootinfo.h>
-+#include <asm/fw/cfe/cfe_api.h>
-+#endif /* CONFIG_MIPS */
-+
- #define BCM963XX_CFE_BLOCK_SIZE		SZ_64K	/* always at least 64KiB */
- 
- #define BCM963XX_CFE_MAGIC_OFFSET	0x4e0
-@@ -32,28 +37,15 @@
- #define STR_NULL_TERMINATE(x) \
- 	do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0)
- 
--static int bcm63xx_detect_cfe(struct mtd_info *master)
-+static inline int bcm63xx_detect_cfe(void)
- {
--	char buf[9];
--	int ret;
--	size_t retlen;
--
--	ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen,
--		       (void *)buf);
--	buf[retlen] = 0;
--
--	if (ret)
--		return ret;
--
--	if (strncmp("cfe-v", buf, 5) == 0)
--		return 0;
-+	int ret = 0;
- 
--	/* very old CFE's do not have the cfe-v string, so check for magic */
--	ret = mtd_read(master, BCM963XX_CFE_MAGIC_OFFSET, 8, &retlen,
--		       (void *)buf);
--	buf[retlen] = 0;
-+#ifdef CONFIG_MIPS
-+	ret = (fw_arg3 == CFE_EPTSEAL);
-+#endif /* CONFIG_MIPS */
- 
--	return strncmp("CFE1CFE1", buf, 8);
-+	return ret;
- }
- 
- static int bcm63xx_read_nvram(struct mtd_info *master,
-@@ -138,7 +130,7 @@ static int bcm63xx_parse_cfe_partitions(
- 	struct bcm963xx_nvram *nvram = NULL;
- 	int ret;
- 
--	if (bcm63xx_detect_cfe(master))
-+	if (!bcm63xx_detect_cfe())
- 		return -EINVAL;
- 
- 	nvram = vzalloc(sizeof(*nvram));
diff --git a/target/linux/bcm63xx/patches-5.4/040-v5.12-bcm63xx_enet-batch-process-rx-path.patch b/target/linux/bcm63xx/patches-5.4/040-v5.12-bcm63xx_enet-batch-process-rx-path.patch
deleted file mode 100644
index ab1a4a91e1..0000000000
--- a/target/linux/bcm63xx/patches-5.4/040-v5.12-bcm63xx_enet-batch-process-rx-path.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 9cbfea02c1dbee0afb9128f065e6e793672b9ff7 Mon Sep 17 00:00:00 2001
-From: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Date: Wed, 6 Jan 2021 22:42:02 +0800
-Subject: [PATCH 1/7] bcm63xx_enet: batch process rx path
-
-Use netif_receive_skb_list to batch process rx skb.
-Tested on BCM6328 320 MHz using iperf3 -M 512, increasing performance
-by 12.5%.
-
-Before:
-[ ID] Interval           Transfer     Bandwidth       Retr
-[  4]   0.00-30.00  sec   120 MBytes  33.7 Mbits/sec  277         sender
-[  4]   0.00-30.00  sec   120 MBytes  33.5 Mbits/sec            receiver
-
-After:
-[ ID] Interval           Transfer     Bandwidth       Retr
-[  4]   0.00-30.00  sec   136 MBytes  37.9 Mbits/sec  203         sender
-[  4]   0.00-30.00  sec   135 MBytes  37.7 Mbits/sec            receiver
-
-Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -298,10 +298,12 @@ static void bcm_enet_refill_rx_timer(str
- static int bcm_enet_receive_queue(struct net_device *dev, int budget)
- {
- 	struct bcm_enet_priv *priv;
-+	struct list_head rx_list;
- 	struct device *kdev;
- 	int processed;
- 
- 	priv = netdev_priv(dev);
-+	INIT_LIST_HEAD(&rx_list);
- 	kdev = &priv->pdev->dev;
- 	processed = 0;
- 
-@@ -392,10 +394,12 @@ static int bcm_enet_receive_queue(struct
- 		skb->protocol = eth_type_trans(skb, dev);
- 		dev->stats.rx_packets++;
- 		dev->stats.rx_bytes += len;
--		netif_receive_skb(skb);
-+		list_add_tail(&skb->list, &rx_list);
- 
- 	} while (--budget > 0);
- 
-+	netif_receive_skb_list(&rx_list);
-+
- 	if (processed || !priv->rx_desc_count) {
- 		bcm_enet_refill_rx(dev);
- 
diff --git a/target/linux/bcm63xx/patches-5.4/041-v5.12-bcm63xx_enet-add-BQL-support.patch b/target/linux/bcm63xx/patches-5.4/041-v5.12-bcm63xx_enet-add-BQL-support.patch
deleted file mode 100644
index f55aa8fe17..0000000000
--- a/target/linux/bcm63xx/patches-5.4/041-v5.12-bcm63xx_enet-add-BQL-support.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 4c59b0f5543db80abbbe9efdd9b25e7899501db5 Mon Sep 17 00:00:00 2001
-From: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Date: Wed, 6 Jan 2021 22:42:03 +0800
-Subject: [PATCH 2/7] bcm63xx_enet: add BQL support
-
-Add Byte Queue Limits support to reduce/remove bufferbloat in
-bcm63xx_enet.
-
-Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -418,9 +418,11 @@ static int bcm_enet_receive_queue(struct
- static int bcm_enet_tx_reclaim(struct net_device *dev, int force)
- {
- 	struct bcm_enet_priv *priv;
-+	unsigned int bytes;
- 	int released;
- 
- 	priv = netdev_priv(dev);
-+	bytes = 0;
- 	released = 0;
- 
- 	while (priv->tx_desc_count < priv->tx_ring_size) {
-@@ -457,10 +459,13 @@ static int bcm_enet_tx_reclaim(struct ne
- 		if (desc->len_stat & DMADESC_UNDER_MASK)
- 			dev->stats.tx_errors++;
- 
-+		bytes += skb->len;
- 		dev_kfree_skb(skb);
- 		released++;
- 	}
- 
-+	netdev_completed_queue(dev, released, bytes);
-+
- 	if (netif_queue_stopped(dev) && released)
- 		netif_wake_queue(dev);
- 
-@@ -627,6 +632,8 @@ bcm_enet_start_xmit(struct sk_buff *skb,
- 	desc->len_stat = len_stat;
- 	wmb();
- 
-+	netdev_sent_queue(dev, skb->len);
-+
- 	/* kick tx dma */
- 	enet_dmac_writel(priv, priv->dma_chan_en_mask,
- 				 ENETDMAC_CHANCFG, priv->tx_chan);
-@@ -1170,6 +1177,7 @@ static int bcm_enet_stop(struct net_devi
- 	kdev = &priv->pdev->dev;
- 
- 	netif_stop_queue(dev);
-+	netdev_reset_queue(dev);
- 	napi_disable(&priv->napi);
- 	if (priv->has_phy)
- 		phy_stop(dev->phydev);
-@@ -2343,6 +2351,7 @@ static int bcm_enetsw_stop(struct net_de
- 
- 	del_timer_sync(&priv->swphy_poll);
- 	netif_stop_queue(dev);
-+	netdev_reset_queue(dev);
- 	napi_disable(&priv->napi);
- 	del_timer_sync(&priv->rx_timeout);
- 
diff --git a/target/linux/bcm63xx/patches-5.4/042-v5.12-bcm63xx_enet-add-xmit_more-support.patch b/target/linux/bcm63xx/patches-5.4/042-v5.12-bcm63xx_enet-add-xmit_more-support.patch
deleted file mode 100644
index 4b02cd7849..0000000000
--- a/target/linux/bcm63xx/patches-5.4/042-v5.12-bcm63xx_enet-add-xmit_more-support.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 375281d3a6dcabaa98f489ee412aedca6d99dffb Mon Sep 17 00:00:00 2001
-From: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Date: Wed, 6 Jan 2021 22:42:04 +0800
-Subject: [PATCH 3/7] bcm63xx_enet: add xmit_more support
-
-Support bulking hardware TX queue by using netdev_xmit_more().
-
-Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -635,7 +635,8 @@ bcm_enet_start_xmit(struct sk_buff *skb,
- 	netdev_sent_queue(dev, skb->len);
- 
- 	/* kick tx dma */
--	enet_dmac_writel(priv, priv->dma_chan_en_mask,
-+	if (!netdev_xmit_more() || !priv->tx_desc_count)
-+		enet_dmac_writel(priv, priv->dma_chan_en_mask,
- 				 ENETDMAC_CHANCFG, priv->tx_chan);
- 
- 	/* stop queue if no more desc available */
diff --git a/target/linux/bcm63xx/patches-5.4/043-v5.12-bcm63xx_enet-alloc-rx-skb-with-NET_IP_ALIGN.patch b/target/linux/bcm63xx/patches-5.4/043-v5.12-bcm63xx_enet-alloc-rx-skb-with-NET_IP_ALIGN.patch
deleted file mode 100644
index 575dcb9ad8..0000000000
--- a/target/linux/bcm63xx/patches-5.4/043-v5.12-bcm63xx_enet-alloc-rx-skb-with-NET_IP_ALIGN.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From c4a207865e7ea310dc146ff4aa1b0aa0c78d3fe1 Mon Sep 17 00:00:00 2001
-From: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Date: Wed, 6 Jan 2021 22:42:05 +0800
-Subject: [PATCH 4/7] bcm63xx_enet: alloc rx skb with NET_IP_ALIGN
-
-Use netdev_alloc_skb_ip_align on newer SoCs with integrated switch
-(enetsw) when refilling RX. Increases packet processing performance
-by 30% (with netif_receive_skb_list).
-
-Non-enetsw SoCs cannot function with the extra pad so continue to use
-the regular netdev_alloc_skb.
-
-Tested on BCM6328 320 MHz and iperf3 -M 512 to measure packet/sec
-performance.
-
-Before:
-[ ID] Interval Transfer Bandwidth Retr
-[ 4] 0.00-30.00 sec 120 MBytes 33.7 Mbits/sec 277 sender
-[ 4] 0.00-30.00 sec 120 MBytes 33.5 Mbits/sec receiver
-
-After (+netif_receive_skb_list):
-[ 4] 0.00-30.00 sec 155 MBytes 43.3 Mbits/sec 354 sender
-[ 4] 0.00-30.00 sec 154 MBytes 43.1 Mbits/sec receiver
-
-Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -238,7 +238,10 @@ static int bcm_enet_refill_rx(struct net
- 		desc = &priv->rx_desc_cpu[desc_idx];
- 
- 		if (!priv->rx_skb[desc_idx]) {
--			skb = netdev_alloc_skb(dev, priv->rx_skb_size);
-+			if (priv->enet_is_sw)
-+				skb = netdev_alloc_skb_ip_align(dev, priv->rx_skb_size);
-+			else
-+				skb = netdev_alloc_skb(dev, priv->rx_skb_size);
- 			if (!skb)
- 				break;
- 			priv->rx_skb[desc_idx] = skb;
diff --git a/target/linux/bcm63xx/patches-5.4/044-v5.12-bcm63xx_enet-consolidate-rx-SKB-ring-cleanup-code.patch b/target/linux/bcm63xx/patches-5.4/044-v5.12-bcm63xx_enet-consolidate-rx-SKB-ring-cleanup-code.patch
deleted file mode 100644
index 0976252673..0000000000
--- a/target/linux/bcm63xx/patches-5.4/044-v5.12-bcm63xx_enet-consolidate-rx-SKB-ring-cleanup-code.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From 3d0b72654b0c8304424503e7560ee8635dd56340 Mon Sep 17 00:00:00 2001
-From: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Date: Wed, 6 Jan 2021 22:42:06 +0800
-Subject: [PATCH 5/7] bcm63xx_enet: consolidate rx SKB ring cleanup code
-
-The rx SKB ring use the same code for cleanup at various points.
-Combine them into a function to reduce lines of code.
-
-Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 72 ++++++--------------
- 1 file changed, 22 insertions(+), 50 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -861,6 +861,24 @@ static void bcm_enet_adjust_link(struct
- 		priv->pause_tx ? "tx" : "off");
- }
- 
-+static void bcm_enet_free_rx_skb_ring(struct device *kdev, struct bcm_enet_priv *priv)
-+{
-+	int i;
-+
-+	for (i = 0; i < priv->rx_ring_size; i++) {
-+		struct bcm_enet_desc *desc;
-+
-+		if (!priv->rx_skb[i])
-+			continue;
-+
-+		desc = &priv->rx_desc_cpu[i];
-+		dma_unmap_single(kdev, desc->address, priv->rx_skb_size,
-+				 DMA_FROM_DEVICE);
-+		kfree_skb(priv->rx_skb[i]);
-+	}
-+	kfree(priv->rx_skb);
-+}
-+
- /*
-  * open callback, allocate dma rings & buffers and start rx operation
-  */
-@@ -1085,18 +1103,7 @@ static int bcm_enet_open(struct net_devi
- 	return 0;
- 
- out:
--	for (i = 0; i < priv->rx_ring_size; i++) {
--		struct bcm_enet_desc *desc;
--
--		if (!priv->rx_skb[i])
--			continue;
--
--		desc = &priv->rx_desc_cpu[i];
--		dma_unmap_single(kdev, desc->address, priv->rx_skb_size,
--				 DMA_FROM_DEVICE);
--		kfree_skb(priv->rx_skb[i]);
--	}
--	kfree(priv->rx_skb);
-+	bcm_enet_free_rx_skb_ring(kdev, priv);
- 
- out_free_tx_skb:
- 	kfree(priv->tx_skb);
-@@ -1175,7 +1182,6 @@ static int bcm_enet_stop(struct net_devi
- {
- 	struct bcm_enet_priv *priv;
- 	struct device *kdev;
--	int i;
- 
- 	priv = netdev_priv(dev);
- 	kdev = &priv->pdev->dev;
-@@ -1204,20 +1210,9 @@ static int bcm_enet_stop(struct net_devi
- 	bcm_enet_tx_reclaim(dev, 1);
- 
- 	/* free the rx skb ring */
--	for (i = 0; i < priv->rx_ring_size; i++) {
--		struct bcm_enet_desc *desc;
--
--		if (!priv->rx_skb[i])
--			continue;
--
--		desc = &priv->rx_desc_cpu[i];
--		dma_unmap_single(kdev, desc->address, priv->rx_skb_size,
--				 DMA_FROM_DEVICE);
--		kfree_skb(priv->rx_skb[i]);
--	}
-+	bcm_enet_free_rx_skb_ring(kdev, priv);
- 
- 	/* free remaining allocated memory */
--	kfree(priv->rx_skb);
- 	kfree(priv->tx_skb);
- 	dma_free_coherent(kdev, priv->rx_desc_alloc_size,
- 			  priv->rx_desc_cpu, priv->rx_desc_dma);
-@@ -2308,18 +2303,7 @@ static int bcm_enetsw_open(struct net_de
- 	return 0;
- 
- out:
--	for (i = 0; i < priv->rx_ring_size; i++) {
--		struct bcm_enet_desc *desc;
--
--		if (!priv->rx_skb[i])
--			continue;
--
--		desc = &priv->rx_desc_cpu[i];
--		dma_unmap_single(kdev, desc->address, priv->rx_skb_size,
--				 DMA_FROM_DEVICE);
--		kfree_skb(priv->rx_skb[i]);
--	}
--	kfree(priv->rx_skb);
-+	bcm_enet_free_rx_skb_ring(kdev, priv);
- 
- out_free_tx_skb:
- 	kfree(priv->tx_skb);
-@@ -2348,7 +2332,6 @@ static int bcm_enetsw_stop(struct net_de
- {
- 	struct bcm_enet_priv *priv;
- 	struct device *kdev;
--	int i;
- 
- 	priv = netdev_priv(dev);
- 	kdev = &priv->pdev->dev;
-@@ -2371,20 +2354,9 @@ static int bcm_enetsw_stop(struct net_de
- 	bcm_enet_tx_reclaim(dev, 1);
- 
- 	/* free the rx skb ring */
--	for (i = 0; i < priv->rx_ring_size; i++) {
--		struct bcm_enet_desc *desc;
--
--		if (!priv->rx_skb[i])
--			continue;
--
--		desc = &priv->rx_desc_cpu[i];
--		dma_unmap_single(kdev, desc->address, priv->rx_skb_size,
--				 DMA_FROM_DEVICE);
--		kfree_skb(priv->rx_skb[i]);
--	}
-+	bcm_enet_free_rx_skb_ring(kdev, priv);
- 
- 	/* free remaining allocated memory */
--	kfree(priv->rx_skb);
- 	kfree(priv->tx_skb);
- 	dma_free_coherent(kdev, priv->rx_desc_alloc_size,
- 			  priv->rx_desc_cpu, priv->rx_desc_dma);
diff --git a/target/linux/bcm63xx/patches-5.4/045-v5.12-bcm63xx_enet-convert-to-build_skb.patch b/target/linux/bcm63xx/patches-5.4/045-v5.12-bcm63xx_enet-convert-to-build_skb.patch
deleted file mode 100644
index 80d44ec981..0000000000
--- a/target/linux/bcm63xx/patches-5.4/045-v5.12-bcm63xx_enet-convert-to-build_skb.patch
+++ /dev/null
@@ -1,347 +0,0 @@
-From d27de0ef5ef995df2cc5f5c006c0efcf0a62b6af Mon Sep 17 00:00:00 2001
-From: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Date: Wed, 6 Jan 2021 22:42:07 +0800
-Subject: [PATCH 6/7] bcm63xx_enet: convert to build_skb
-
-We can increase the efficiency of rx path by using buffers to receive
-packets then build SKBs around them just before passing into the network
-stack. In contrast, preallocating SKBs too early reduces CPU cache
-efficiency.
-
-Check if we're in NAPI context when refilling RX. Normally we're almost
-always running in NAPI context. Dispatch to napi_alloc_frag directly
-instead of relying on netdev_alloc_frag which does the same but
-with the overhead of local_bh_disable/enable.
-
-Tested on BCM6328 320 MHz and iperf3 -M 512 to measure packet/sec
-performance. Included netif_receive_skb_list and NET_IP_ALIGN
-optimizations.
-
-Before:
-[ ID] Interval           Transfer     Bandwidth       Retr
-[  4]   0.00-10.00  sec  49.9 MBytes  41.9 Mbits/sec  197         sender
-[  4]   0.00-10.00  sec  49.3 MBytes  41.3 Mbits/sec            receiver
-
-After:
-[ ID] Interval           Transfer     Bandwidth       Retr
-[  4]   0.00-30.00  sec   171 MBytes  47.8 Mbits/sec  272         sender
-[  4]   0.00-30.00  sec   170 MBytes  47.6 Mbits/sec            receiver
-
-Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 111 ++++++++++---------
- drivers/net/ethernet/broadcom/bcm63xx_enet.h |  14 ++-
- 2 files changed, 71 insertions(+), 54 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -221,7 +221,7 @@ static void bcm_enet_mdio_write_mii(stru
- /*
-  * refill rx queue
-  */
--static int bcm_enet_refill_rx(struct net_device *dev)
-+static int bcm_enet_refill_rx(struct net_device *dev, bool napi_mode)
- {
- 	struct bcm_enet_priv *priv;
- 
-@@ -229,29 +229,29 @@ static int bcm_enet_refill_rx(struct net
- 
- 	while (priv->rx_desc_count < priv->rx_ring_size) {
- 		struct bcm_enet_desc *desc;
--		struct sk_buff *skb;
--		dma_addr_t p;
- 		int desc_idx;
- 		u32 len_stat;
- 
- 		desc_idx = priv->rx_dirty_desc;
- 		desc = &priv->rx_desc_cpu[desc_idx];
- 
--		if (!priv->rx_skb[desc_idx]) {
--			if (priv->enet_is_sw)
--				skb = netdev_alloc_skb_ip_align(dev, priv->rx_skb_size);
-+		if (!priv->rx_buf[desc_idx]) {
-+			void *buf;
-+
-+			if (likely(napi_mode))
-+				buf = napi_alloc_frag(priv->rx_frag_size);
- 			else
--				skb = netdev_alloc_skb(dev, priv->rx_skb_size);
--			if (!skb)
-+				buf = netdev_alloc_frag(priv->rx_frag_size);
-+			if (unlikely(!buf))
- 				break;
--			priv->rx_skb[desc_idx] = skb;
--			p = dma_map_single(&priv->pdev->dev, skb->data,
--					   priv->rx_skb_size,
--					   DMA_FROM_DEVICE);
--			desc->address = p;
-+			priv->rx_buf[desc_idx] = buf;
-+			desc->address = dma_map_single(&priv->pdev->dev,
-+						       buf + priv->rx_buf_offset,
-+						       priv->rx_buf_size,
-+						       DMA_FROM_DEVICE);
- 		}
- 
--		len_stat = priv->rx_skb_size << DMADESC_LENGTH_SHIFT;
-+		len_stat = priv->rx_buf_size << DMADESC_LENGTH_SHIFT;
- 		len_stat |= DMADESC_OWNER_MASK;
- 		if (priv->rx_dirty_desc == priv->rx_ring_size - 1) {
- 			len_stat |= (DMADESC_WRAP_MASK >> priv->dma_desc_shift);
-@@ -291,7 +291,7 @@ static void bcm_enet_refill_rx_timer(str
- 	struct net_device *dev = priv->net_dev;
- 
- 	spin_lock(&priv->rx_lock);
--	bcm_enet_refill_rx(dev);
-+	bcm_enet_refill_rx(dev, false);
- 	spin_unlock(&priv->rx_lock);
- }
- 
-@@ -321,6 +321,7 @@ static int bcm_enet_receive_queue(struct
- 		int desc_idx;
- 		u32 len_stat;
- 		unsigned int len;
-+		void *buf;
- 
- 		desc_idx = priv->rx_curr_desc;
- 		desc = &priv->rx_desc_cpu[desc_idx];
-@@ -366,16 +367,14 @@ static int bcm_enet_receive_queue(struct
- 		}
- 
- 		/* valid packet */
--		skb = priv->rx_skb[desc_idx];
-+		buf = priv->rx_buf[desc_idx];
- 		len = (len_stat & DMADESC_LENGTH_MASK) >> DMADESC_LENGTH_SHIFT;
- 		/* don't include FCS */
- 		len -= 4;
- 
- 		if (len < copybreak) {
--			struct sk_buff *nskb;
--
--			nskb = napi_alloc_skb(&priv->napi, len);
--			if (!nskb) {
-+			skb = napi_alloc_skb(&priv->napi, len);
-+			if (unlikely(!skb)) {
- 				/* forget packet, just rearm desc */
- 				dev->stats.rx_dropped++;
- 				continue;
-@@ -383,14 +382,21 @@ static int bcm_enet_receive_queue(struct
- 
- 			dma_sync_single_for_cpu(kdev, desc->address,
- 						len, DMA_FROM_DEVICE);
--			memcpy(nskb->data, skb->data, len);
-+			memcpy(skb->data, buf + priv->rx_buf_offset, len);
- 			dma_sync_single_for_device(kdev, desc->address,
- 						   len, DMA_FROM_DEVICE);
--			skb = nskb;
- 		} else {
--			dma_unmap_single(&priv->pdev->dev, desc->address,
--					 priv->rx_skb_size, DMA_FROM_DEVICE);
--			priv->rx_skb[desc_idx] = NULL;
-+			dma_unmap_single(kdev, desc->address,
-+					 priv->rx_buf_size, DMA_FROM_DEVICE);
-+			priv->rx_buf[desc_idx] = NULL;
-+
-+			skb = build_skb(buf, priv->rx_frag_size);
-+			if (unlikely(!skb)) {
-+				skb_free_frag(buf);
-+				dev->stats.rx_dropped++;
-+				continue;
-+			}
-+			skb_reserve(skb, priv->rx_buf_offset);
- 		}
- 
- 		skb_put(skb, len);
-@@ -404,7 +410,7 @@ static int bcm_enet_receive_queue(struct
- 	netif_receive_skb_list(&rx_list);
- 
- 	if (processed || !priv->rx_desc_count) {
--		bcm_enet_refill_rx(dev);
-+		bcm_enet_refill_rx(dev, true);
- 
- 		/* kick rx dma */
- 		enet_dmac_writel(priv, priv->dma_chan_en_mask,
-@@ -861,22 +867,22 @@ static void bcm_enet_adjust_link(struct
- 		priv->pause_tx ? "tx" : "off");
- }
- 
--static void bcm_enet_free_rx_skb_ring(struct device *kdev, struct bcm_enet_priv *priv)
-+static void bcm_enet_free_rx_buf_ring(struct device *kdev, struct bcm_enet_priv *priv)
- {
- 	int i;
- 
- 	for (i = 0; i < priv->rx_ring_size; i++) {
- 		struct bcm_enet_desc *desc;
- 
--		if (!priv->rx_skb[i])
-+		if (!priv->rx_buf[i])
- 			continue;
- 
- 		desc = &priv->rx_desc_cpu[i];
--		dma_unmap_single(kdev, desc->address, priv->rx_skb_size,
-+		dma_unmap_single(kdev, desc->address, priv->rx_buf_size,
- 				 DMA_FROM_DEVICE);
--		kfree_skb(priv->rx_skb[i]);
-+		skb_free_frag(priv->rx_buf[i]);
- 	}
--	kfree(priv->rx_skb);
-+	kfree(priv->rx_buf);
- }
- 
- /*
-@@ -988,10 +994,10 @@ static int bcm_enet_open(struct net_devi
- 	priv->tx_curr_desc = 0;
- 	spin_lock_init(&priv->tx_lock);
- 
--	/* init & fill rx ring with skbs */
--	priv->rx_skb = kcalloc(priv->rx_ring_size, sizeof(struct sk_buff *),
-+	/* init & fill rx ring with buffers */
-+	priv->rx_buf = kcalloc(priv->rx_ring_size, sizeof(void *),
- 			       GFP_KERNEL);
--	if (!priv->rx_skb) {
-+	if (!priv->rx_buf) {
- 		ret = -ENOMEM;
- 		goto out_free_tx_skb;
- 	}
-@@ -1008,8 +1014,8 @@ static int bcm_enet_open(struct net_devi
- 		enet_dmac_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
- 				ENETDMAC_BUFALLOC, priv->rx_chan);
- 
--	if (bcm_enet_refill_rx(dev)) {
--		dev_err(kdev, "cannot allocate rx skb queue\n");
-+	if (bcm_enet_refill_rx(dev, false)) {
-+		dev_err(kdev, "cannot allocate rx buffer queue\n");
- 		ret = -ENOMEM;
- 		goto out;
- 	}
-@@ -1103,7 +1109,7 @@ static int bcm_enet_open(struct net_devi
- 	return 0;
- 
- out:
--	bcm_enet_free_rx_skb_ring(kdev, priv);
-+	bcm_enet_free_rx_buf_ring(kdev, priv);
- 
- out_free_tx_skb:
- 	kfree(priv->tx_skb);
-@@ -1209,8 +1215,8 @@ static int bcm_enet_stop(struct net_devi
- 	/* force reclaim of all tx buffers */
- 	bcm_enet_tx_reclaim(dev, 1);
- 
--	/* free the rx skb ring */
--	bcm_enet_free_rx_skb_ring(kdev, priv);
-+	/* free the rx buffer ring */
-+	bcm_enet_free_rx_buf_ring(kdev, priv);
- 
- 	/* free remaining allocated memory */
- 	kfree(priv->tx_skb);
-@@ -1637,9 +1643,12 @@ static int bcm_enet_change_mtu(struct ne
- 	 * align rx buffer size to dma burst len, account FCS since
- 	 * it's appended
- 	 */
--	priv->rx_skb_size = ALIGN(actual_mtu + ETH_FCS_LEN,
-+	priv->rx_buf_size = ALIGN(actual_mtu + ETH_FCS_LEN,
- 				  priv->dma_maxburst * 4);
- 
-+	priv->rx_frag_size = SKB_DATA_ALIGN(priv->rx_buf_offset + priv->rx_buf_size) +
-+					    SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
-+
- 	dev->mtu = new_mtu;
- 	return 0;
- }
-@@ -1725,6 +1734,7 @@ static int bcm_enet_probe(struct platfor
- 
- 	priv->enet_is_sw = false;
- 	priv->dma_maxburst = BCMENET_DMA_MAXBURST;
-+	priv->rx_buf_offset = NET_SKB_PAD;
- 
- 	ret = bcm_enet_change_mtu(dev, dev->mtu);
- 	if (ret)
-@@ -2142,7 +2152,7 @@ static int bcm_enetsw_open(struct net_de
- 	priv->tx_skb = kcalloc(priv->tx_ring_size, sizeof(struct sk_buff *),
- 			       GFP_KERNEL);
- 	if (!priv->tx_skb) {
--		dev_err(kdev, "cannot allocate rx skb queue\n");
-+		dev_err(kdev, "cannot allocate tx skb queue\n");
- 		ret = -ENOMEM;
- 		goto out_free_tx_ring;
- 	}
-@@ -2152,11 +2162,11 @@ static int bcm_enetsw_open(struct net_de
- 	priv->tx_curr_desc = 0;
- 	spin_lock_init(&priv->tx_lock);
- 
--	/* init & fill rx ring with skbs */
--	priv->rx_skb = kcalloc(priv->rx_ring_size, sizeof(struct sk_buff *),
-+	/* init & fill rx ring with buffers */
-+	priv->rx_buf = kcalloc(priv->rx_ring_size, sizeof(void *),
- 			       GFP_KERNEL);
--	if (!priv->rx_skb) {
--		dev_err(kdev, "cannot allocate rx skb queue\n");
-+	if (!priv->rx_buf) {
-+		dev_err(kdev, "cannot allocate rx buffer queue\n");
- 		ret = -ENOMEM;
- 		goto out_free_tx_skb;
- 	}
-@@ -2203,8 +2213,8 @@ static int bcm_enetsw_open(struct net_de
- 	enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
- 			ENETDMA_BUFALLOC_REG(priv->rx_chan));
- 
--	if (bcm_enet_refill_rx(dev)) {
--		dev_err(kdev, "cannot allocate rx skb queue\n");
-+	if (bcm_enet_refill_rx(dev, false)) {
-+		dev_err(kdev, "cannot allocate rx buffer queue\n");
- 		ret = -ENOMEM;
- 		goto out;
- 	}
-@@ -2303,7 +2313,7 @@ static int bcm_enetsw_open(struct net_de
- 	return 0;
- 
- out:
--	bcm_enet_free_rx_skb_ring(kdev, priv);
-+	bcm_enet_free_rx_buf_ring(kdev, priv);
- 
- out_free_tx_skb:
- 	kfree(priv->tx_skb);
-@@ -2353,8 +2363,8 @@ static int bcm_enetsw_stop(struct net_de
- 	/* force reclaim of all tx buffers */
- 	bcm_enet_tx_reclaim(dev, 1);
- 
--	/* free the rx skb ring */
--	bcm_enet_free_rx_skb_ring(kdev, priv);
-+	/* free the rx buffer ring */
-+	bcm_enet_free_rx_buf_ring(kdev, priv);
- 
- 	/* free remaining allocated memory */
- 	kfree(priv->tx_skb);
-@@ -2655,6 +2665,7 @@ static int bcm_enetsw_probe(struct platf
- 	priv->rx_ring_size = BCMENET_DEF_RX_DESC;
- 	priv->tx_ring_size = BCMENET_DEF_TX_DESC;
- 	priv->dma_maxburst = BCMENETSW_DMA_MAXBURST;
-+	priv->rx_buf_offset = NET_SKB_PAD + NET_IP_ALIGN;
- 
- 	pd = dev_get_platdata(&pdev->dev);
- 	if (pd) {
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -230,11 +230,17 @@ struct bcm_enet_priv {
- 	/* next dirty rx descriptor to refill */
- 	int rx_dirty_desc;
- 
--	/* size of allocated rx skbs */
--	unsigned int rx_skb_size;
-+	/* size of allocated rx buffers */
-+	unsigned int rx_buf_size;
- 
--	/* list of skb given to hw for rx */
--	struct sk_buff **rx_skb;
-+	/* allocated rx buffer offset */
-+	unsigned int rx_buf_offset;
-+
-+	/* size of allocated rx frag */
-+	unsigned int rx_frag_size;
-+
-+	/* list of buffer given to hw for rx */
-+	void **rx_buf;
- 
- 	/* used when rx skb allocation failed, so we defer rx queue
- 	 * refill */
diff --git a/target/linux/bcm63xx/patches-5.4/046-v5.12-bcm63xx_enet-improve-rx-loop.patch b/target/linux/bcm63xx/patches-5.4/046-v5.12-bcm63xx_enet-improve-rx-loop.patch
deleted file mode 100644
index 65d3e2571a..0000000000
--- a/target/linux/bcm63xx/patches-5.4/046-v5.12-bcm63xx_enet-improve-rx-loop.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From ae2259eebeacb7753e3043278957b45840123972 Mon Sep 17 00:00:00 2001
-From: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Date: Wed, 6 Jan 2021 22:42:08 +0800
-Subject: [PATCH 7/7] bcm63xx_enet: improve rx loop
-
-Use existing rx processed count to track against budget, thereby making
-budget decrement operation redundant.
-
-rx_desc_count can be calculated outside the rx loop, making the loop a
-bit smaller.
-
-Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -340,7 +340,6 @@ static int bcm_enet_receive_queue(struct
- 		priv->rx_curr_desc++;
- 		if (priv->rx_curr_desc == priv->rx_ring_size)
- 			priv->rx_curr_desc = 0;
--		priv->rx_desc_count--;
- 
- 		/* if the packet does not have start of packet _and_
- 		 * end of packet flag set, then just recycle it */
-@@ -405,9 +404,10 @@ static int bcm_enet_receive_queue(struct
- 		dev->stats.rx_bytes += len;
- 		list_add_tail(&skb->list, &rx_list);
- 
--	} while (--budget > 0);
-+	} while (processed < budget);
- 
- 	netif_receive_skb_list(&rx_list);
-+	priv->rx_desc_count -= processed;
- 
- 	if (processed || !priv->rx_desc_count) {
- 		bcm_enet_refill_rx(dev, true);
diff --git a/target/linux/bcm63xx/patches-5.4/047-v5.12-bcm63xx_enet-fix-kernel-panic.patch b/target/linux/bcm63xx/patches-5.4/047-v5.12-bcm63xx_enet-fix-kernel-panic.patch
deleted file mode 100644
index fad336a643..0000000000
--- a/target/linux/bcm63xx/patches-5.4/047-v5.12-bcm63xx_enet-fix-kernel-panic.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 90eda07518ea7e8d1b3e6445eb3633eef9f65218 Mon Sep 17 00:00:00 2001
-From: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Date: Mon, 22 Feb 2021 09:15:12 +0800
-Subject: [PATCH net] bcm63xx_enet: fix sporadic kernel panic
-
-In ndo_stop functions, netdev_completed_queue() is called during forced
-tx reclaim, after netdev_reset_queue(). This may trigger kernel panic if
-there is any tx skb left.
-
-This patch moves netdev_reset_queue() to after tx reclaim, so BQL can
-complete successfully then reset.
-
-Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Fixes: 4c59b0f5543d ("bcm63xx_enet: add BQL support")
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1193,7 +1193,6 @@ static int bcm_enet_stop(struct net_devi
- 	kdev = &priv->pdev->dev;
- 
- 	netif_stop_queue(dev);
--	netdev_reset_queue(dev);
- 	napi_disable(&priv->napi);
- 	if (priv->has_phy)
- 		phy_stop(dev->phydev);
-@@ -1232,6 +1231,9 @@ static int bcm_enet_stop(struct net_devi
- 	if (priv->has_phy)
- 		phy_disconnect(dev->phydev);
- 
-+	/* reset BQL after forced tx reclaim to not kernel panic */
-+	netdev_reset_queue(dev);
-+
- 	return 0;
- }
- 
-@@ -2348,7 +2350,6 @@ static int bcm_enetsw_stop(struct net_de
- 
- 	del_timer_sync(&priv->swphy_poll);
- 	netif_stop_queue(dev);
--	netdev_reset_queue(dev);
- 	napi_disable(&priv->napi);
- 	del_timer_sync(&priv->rx_timeout);
- 
-@@ -2376,6 +2377,9 @@ static int bcm_enetsw_stop(struct net_de
- 		free_irq(priv->irq_tx, dev);
- 	free_irq(priv->irq_rx, dev);
- 
-+	/* reset BQL after forced tx reclaim to not kernel panic */
-+	netdev_reset_queue(dev);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/bcm63xx/patches-5.4/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/bcm63xx/patches-5.4/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
deleted file mode 100644
index 3974b9bd30..0000000000
--- a/target/linux/bcm63xx/patches-5.4/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 80a2f983e9f44dbc3e01ae31c62d877846a7f791 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:19 +0100
-Subject: [PATCH 01/11] MIPS: BCM63XX: add USB host clock enable delay
-
-Knowledge of the clock setup delay should remain at the clock level (so
-it can be clock specific and CPU specific). Add the 100 milliseconds
-required clock delay for the USB host clock when it gets enabled.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c |    5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -214,6 +214,11 @@ static void usbh_set(struct clk *clk, in
- 		bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
- 	else if (BCMCPU_IS_6368())
- 		bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-+	else
-+		return;
-+
-+	if (enable)
-+		msleep(100);
- }
- 
- static struct clk clk_usbh = {
diff --git a/target/linux/bcm63xx/patches-5.4/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/bcm63xx/patches-5.4/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
deleted file mode 100644
index 0bbf7c8e87..0000000000
--- a/target/linux/bcm63xx/patches-5.4/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 8e9bf528a122741f0171b89c297b63041116d704 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:20 +0100
-Subject: [PATCH 02/11] MIPS: BCM63XX: add USB device clock enable delay to
- clock code
-
-This patch adds the required 10 micro seconds delay to the USB device
-clock enable operation. Put this where the correct clock knowledege is,
-which is in the clock code, and remove this delay from the bcm63xx_udc
-gadget driver where it was before.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c          |    5 +++++
- drivers/usb/gadget/bcm63xx_udc.c |    1 -
- 2 files changed, 5 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -236,6 +236,11 @@ static void usbd_set(struct clk *clk, in
- 		bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
- 	else if (BCMCPU_IS_6368())
- 		bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
-+	else
-+		return;
-+
-+	if (enable)
-+		udelay(10);
- }
- 
- static struct clk clk_usbd = {
---- a/drivers/usb/gadget/udc/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
-@@ -402,7 +402,6 @@ static inline void set_clocks(struct bcm
- 	if (is_enabled) {
- 		clk_enable(udc->usbh_clk);
- 		clk_enable(udc->usbd_clk);
--		udelay(10);
- 	} else {
- 		clk_disable(udc->usbd_clk);
- 		clk_disable(udc->usbh_clk);
diff --git a/target/linux/bcm63xx/patches-5.4/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/bcm63xx/patches-5.4/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
deleted file mode 100644
index d276e0876f..0000000000
--- a/target/linux/bcm63xx/patches-5.4/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
+++ /dev/null
@@ -1,151 +0,0 @@
-From ac9b0b574d54be28b300bf99ffe092a2c589484f Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:21 +0100
-Subject: [PATCH 03/11] MIPS: BCM63XX: move code touching the USB private
- register
-
-This patch moves the code touching the USB private register in the
-bcm63xx USB gadget driver to arch/mips/bcm63xx/usb-common.c in
-preparation for adding support for OHCI and EHCI host controllers which
-will also touch the USB private register.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/usb-common.c                     |   53 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    9 ++++
- drivers/usb/gadget/bcm63xx_udc.c                   |   27 ++--------
- 4 files changed, 67 insertions(+), 24 deletions(-)
- create mode 100644 arch/mips/bcm63xx/usb-common.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
- 		   setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
- 		   dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--		   dev-usb-usbd.o
-+		   dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -0,0 +1,53 @@
-+/*
-+ * Broadcom BCM63xx common USB device configuration code
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-+ * Copyright (C) 2012 Broadcom Corporation
-+ *
-+ */
-+#include <linux/export.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
-+{
-+	u32 val;
-+
-+	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+	if (is_device) {
-+		val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+	} else {
-+		val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+	}
-+	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+	if (is_device)
-+		val |= USBH_PRIV_SWAP_USBD_MASK;
-+	else
-+		val &= ~USBH_PRIV_SWAP_USBD_MASK;
-+	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
-+
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
-+{
-+	u32 val;
-+
-+	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+	if (is_on)
-+		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+	else
-+		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -0,0 +1,9 @@
-+#ifndef BCM63XX_USB_PRIV_H_
-+#define BCM63XX_USB_PRIV_H_
-+
-+#include <linux/types.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+
-+#endif /* BCM63XX_USB_PRIV_H_ */
---- a/drivers/usb/gadget/udc/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
-@@ -35,6 +35,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
-+#include <bcm63xx_usb_priv.h>
- 
- #define DRV_MODULE_NAME		"bcm63xx_udc"
- 
-@@ -879,22 +880,7 @@ static void bcm63xx_select_phy_mode(stru
- 		bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
- 	}
- 
--	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--	if (is_device) {
--		val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--	} else {
--		val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--	}
--	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
--
--	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
--	if (is_device)
--		val |= USBH_PRIV_SWAP_USBD_MASK;
--	else
--		val &= ~USBH_PRIV_SWAP_USBD_MASK;
--	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+	bcm63xx_usb_priv_select_phy_mode(portmask, is_device);
- }
- 
- /**
-@@ -908,14 +894,9 @@ static void bcm63xx_select_phy_mode(stru
-  */
- static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
- {
--	u32 val, portmask = BIT(udc->pd->port_no);
-+	u32 portmask = BIT(udc->pd->port_no);
- 
--	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--	if (is_on)
--		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--	else
--		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+	bcm63xx_usb_priv_select_pullup(portmask, is_on);
- }
- 
- /**
diff --git a/target/linux/bcm63xx/patches-5.4/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/bcm63xx/patches-5.4/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
deleted file mode 100644
index 40bbe083a7..0000000000
--- a/target/linux/bcm63xx/patches-5.4/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
+++ /dev/null
@@ -1,169 +0,0 @@
-From 28758a9da77954ed323f86123ef448c6a563c037 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:22 +0100
-Subject: [PATCH 04/11] MIPS: BCM63XX: add OHCI/EHCI configuration bits to
- common USB code
-
-This patch updates the common USB code touching the USB private
-registers with the specific bits to properly enable OHCI and EHCI
-controllers on BCM63xx SoCs. As a result we now need to protect access
-to Read Modify Write sequences using a spinlock because we cannot
-guarantee that any of the exposed helper will not be called
-concurrently.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/usb-common.c                     |   97 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    2 +
- 2 files changed, 99 insertions(+)
-
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -5,10 +5,12 @@
-  * License.  See the file "COPYING" in the main directory of this archive
-  * for more details.
-  *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-  * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-  * Copyright (C) 2012 Broadcom Corporation
-  *
-  */
-+#include <linux/spinlock.h>
- #include <linux/export.h>
- 
- #include <bcm63xx_cpu.h>
-@@ -16,9 +18,14 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_usb_priv.h>
- 
-+static DEFINE_SPINLOCK(usb_priv_reg_lock);
-+
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
- {
- 	u32 val;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&usb_priv_reg_lock, flags);
- 
- 	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
- 	if (is_device) {
-@@ -36,12 +43,17 @@ void bcm63xx_usb_priv_select_phy_mode(u3
- 	else
- 		val &= ~USBH_PRIV_SWAP_USBD_MASK;
- 	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+
-+	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
- 
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
- {
- 	u32 val;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&usb_priv_reg_lock, flags);
- 
- 	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
- 	if (is_on)
-@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32
- 	else
- 		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
- 	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
-+
-+/* The following array represents the meaning of the DESC/DATA
-+ * endian swapping with respect to the CPU configured endianness
-+ *
-+ * DATA	ENDN	mmio	descriptor
-+ * 0	0	BE	invalid
-+ * 0	1	BE	LE
-+ * 1	0	BE	BE
-+ * 1	1	BE	invalid
-+ *
-+ * Since BCM63XX SoCs are configured to be in big-endian mode
-+ * we want configuration at line 3.
-+ */
-+void bcm63xx_usb_priv_ohci_cfg_set(void)
-+{
-+	u32 reg;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+	if (BCMCPU_IS_6348())
-+		bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
-+	else if (BCMCPU_IS_6358()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+		reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+		/*
-+		 * The magic value comes for the original vendor BSP
-+		 * and is needed for USB to work. Datasheet does not
-+		 * help, so the magic value is used as-is.
-+		 */
-+		bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+				USBH_PRIV_TEST_6358_REG);
-+
-+	} else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+		reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+		reg |= USBH_PRIV_SETUP_IOC_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+	}
-+
-+	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
-+
-+void bcm63xx_usb_priv_ehci_cfg_set(void)
-+{
-+	u32 reg;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+	if (BCMCPU_IS_6358()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+		reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+
-+		/*
-+		 * The magic value comes for the original vendor BSP
-+		 * and is needed for USB to work. Datasheet does not
-+		 * help, so the magic value is used as-is.
-+		 */
-+		bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+				USBH_PRIV_TEST_6358_REG);
-+
-+	} else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+		reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+		reg |= USBH_PRIV_SETUP_IOC_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+	}
-+
-+	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -5,5 +5,7 @@
- 
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+void bcm63xx_usb_priv_ohci_cfg_set(void);
-+void bcm63xx_usb_priv_ehci_cfg_set(void);
- 
- #endif /* BCM63XX_USB_PRIV_H_ */
diff --git a/target/linux/bcm63xx/patches-5.4/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/bcm63xx/patches-5.4/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
deleted file mode 100644
index ec90909d13..0000000000
--- a/target/linux/bcm63xx/patches-5.4/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 94ec618bd1a6b07fafbbfc9bcc54e7f9360ff9a0 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:23 +0100
-Subject: [PATCH 05/11] MIPS: BCM63XX: introduce BCM63XX_OHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-OHCI controller, and ensures that all relevant OHCI-related
-configuration options are correctly selected. So far, OHCI support is
-available for the 6328, 6348, 6358 and 6358 SoCs.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |   15 ++++++++++-----
- 1 file changed, 10 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -7,10 +7,17 @@ config BCM63XX_CPU_3368
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HAVE_PCI
- 
-+config BCM63XX_OHCI
-+	bool
-+	select USB_ARCH_HAS_OHCI
-+	select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
-+	select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
-+
- config BCM63XX_CPU_6328
- 	bool "support 6328 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HAVE_PCI
-+	select BCM63XX_OHCI
- 
- config BCM63XX_CPU_6338
- 	bool "support 6338 CPU"
-@@ -25,21 +32,25 @@ config BCM63XX_CPU_6348
- 	bool "support 6348 CPU"
- 	select SYS_HAS_CPU_BMIPS32_3300
- 	select HAVE_PCI
-+	select BCM63XX_OHCI
- 
- config BCM63XX_CPU_6358
- 	bool "support 6358 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HAVE_PCI
-+	select BCM63XX_OHCI
- 
- config BCM63XX_CPU_6362
- 	bool "support 6362 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HAVE_PCI
-+	select BCM63XX_OHCI
- 
- config BCM63XX_CPU_6368
- 	bool "support 6368 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HAVE_PCI
-+	select BCM63XX_OHCI
- endmenu
- 
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/bcm63xx/patches-5.4/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/bcm63xx/patches-5.4/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
deleted file mode 100644
index 8a532fe5d4..0000000000
--- a/target/linux/bcm63xx/patches-5.4/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From 30d22baef255c99a12c4858ce4ab0d45f0d8c9ae Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:24 +0100
-Subject: [PATCH 06/11] MIPS: BCM63XX: add support for the on-chip OHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip OHCI controller which can be
-driven by the ohci-platform generic driver by using specific power
-on/off/suspend callback to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ohci.c                   |   94 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
- 3 files changed, 101 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
- 		   setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
- 		   dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--		   dev-usb-usbd.o usb-common.o
-+		   dev-usb-ohci.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -0,0 +1,94 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/ohci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+
-+static struct resource ohci_resources[] = {
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.end		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static u64 ohci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ohci_power_on(struct platform_device *pdev)
-+{
-+	usb_host_clock = clk_get(&pdev->dev, "usbh");
-+	if (IS_ERR_OR_NULL(usb_host_clock))
-+		return -ENODEV;
-+
-+	clk_prepare_enable(usb_host_clock);
-+
-+	bcm63xx_usb_priv_ohci_cfg_set();
-+
-+	return 0;
-+}
-+
-+static void bcm63xx_ohci_power_off(struct platform_device *pdev)
-+{
-+	if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+		clk_disable_unprepare(usb_host_clock);
-+		clk_put(usb_host_clock);
-+	}
-+}
-+
-+static struct usb_ohci_pdata bcm63xx_ohci_pdata = {
-+	.big_endian_desc	= 1,
-+	.big_endian_mmio	= 1,
-+	.no_big_frame_no	= 1,
-+	.num_ports		= 1,
-+	.power_on		= bcm63xx_ohci_power_on,
-+	.power_off		= bcm63xx_ohci_power_off,
-+	.power_suspend		= bcm63xx_ohci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ohci_device = {
-+	.name		= "ohci-platform",
-+	.id		= -1,
-+	.num_resources	= ARRAY_SIZE(ohci_resources),
-+	.resource	= ohci_resources,
-+	.dev		= {
-+		.platform_data		= &bcm63xx_ohci_pdata,
-+		.dma_mask		= &ohci_dmamask,
-+		.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	},
-+};
-+
-+int __init bcm63xx_ohci_register(void)
-+{
-+	if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
-+		return -ENODEV;
-+
-+	ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-+	ohci_resources[0].end = ohci_resources[0].start;
-+	ohci_resources[0].end += RSET_OHCI_SIZE - 1;
-+	ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
-+
-+	return platform_device_register(&bcm63xx_ohci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_OHCI_H_
-+#define BCM63XX_DEV_USB_OHCI_H_
-+
-+int bcm63xx_ohci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/bcm63xx/patches-5.4/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/bcm63xx/patches-5.4/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
deleted file mode 100644
index b2fbb68ee1..0000000000
--- a/target/linux/bcm63xx/patches-5.4/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 33ef960aed15f9a98a2c51d8d794cd72418e0be4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:25 +0100
-Subject: [PATCH 07/11] MIPS: BCM63XX: register OHCI controller if board
- enables it
-
-BCM63XX-based boards can control the registration of the OHCI controller
-by setting their has_ohci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to
-register the OHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -27,6 +27,7 @@
- #include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
- 
-@@ -892,6 +893,9 @@ int __init board_register_devices(void)
- 	if (board.has_usbd)
- 		bcm63xx_usbd_register(&board.usbd);
- 
-+	if (board.has_ohci0)
-+		bcm63xx_ohci_register();
-+
- 	/* Generate MAC address for WLAN and register our SPROM,
- 	 * do this after registering enet devices
- 	 */
diff --git a/target/linux/bcm63xx/patches-5.4/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/bcm63xx/patches-5.4/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
deleted file mode 100644
index fed826c4cd..0000000000
--- a/target/linux/bcm63xx/patches-5.4/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 00da1683364e58c6430a4577123d01037f8faddc Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:26 +0100
-Subject: [PATCH 08/11] MIPS: BCM63XX: introduce BCM63XX_EHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-EHCI controller, and ensures that all relevant EHCI-related
-configuration options are selected. So far BCM6328, BCM6358 and BCM6368
-have an EHCI controller and do select this symbol. Update
-drivers/usb/host/Kconfig with BCM63XX to update direct unmet
-dependencies.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |    9 +++++++++
- drivers/usb/host/Kconfig  |    5 +++--
- 2 files changed, 12 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -13,11 +13,18 @@ config BCM63XX_OHCI
- 	select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
- 	select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
- 
-+config BCM63XX_EHCI
-+	bool
-+	select USB_ARCH_HAS_EHCI
-+	select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
-+	select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
-+
- config BCM63XX_CPU_6328
- 	bool "support 6328 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HAVE_PCI
- 	select BCM63XX_OHCI
-+	select BCM63XX_EHCI
- 
- config BCM63XX_CPU_6338
- 	bool "support 6338 CPU"
-@@ -39,18 +46,21 @@ config BCM63XX_CPU_6358
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HAVE_PCI
- 	select BCM63XX_OHCI
-+	select BCM63XX_EHCI
- 
- config BCM63XX_CPU_6362
- 	bool "support 6362 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HAVE_PCI
- 	select BCM63XX_OHCI
-+	select BCM63XX_EHCI
- 
- config BCM63XX_CPU_6368
- 	bool "support 6368 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HAVE_PCI
- 	select BCM63XX_OHCI
-+	select BCM63XX_EHCI
- endmenu
- 
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/bcm63xx/patches-5.4/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/bcm63xx/patches-5.4/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
deleted file mode 100644
index 7d0a35c622..0000000000
--- a/target/linux/bcm63xx/patches-5.4/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From e38f13bd6408769c0b565bb1079024f496eee121 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:27 +0100
-Subject: [PATCH 09/11] MIPS: BCM63XX: add support for the on-chip EHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip EHCI controller which can be
-driven by the generic ehci-platform driver by using specific power
-on/off/suspend callbacks to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ehci.c                   |   92 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
- 3 files changed, 99 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
- 		   setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
- 		   dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--		   dev-usb-ohci.o dev-usb-usbd.o usb-common.o
-+		   dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -0,0 +1,92 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/usb/ehci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+
-+static struct resource ehci_resources[] = {
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.end		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static u64 ehci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ehci_power_on(struct platform_device *pdev)
-+{
-+	usb_host_clock = clk_get(&pdev->dev, "usbh");
-+	if (IS_ERR_OR_NULL(usb_host_clock))
-+		return -ENODEV;
-+
-+	clk_prepare_enable(usb_host_clock);
-+
-+	bcm63xx_usb_priv_ehci_cfg_set();
-+
-+	return 0;
-+}
-+
-+static void bcm63xx_ehci_power_off(struct platform_device *pdev)
-+{
-+	if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+		clk_disable_unprepare(usb_host_clock);
-+		clk_put(usb_host_clock);
-+	}
-+}
-+
-+static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
-+	.big_endian_desc	= 1,
-+	.big_endian_mmio	= 1,
-+	.power_on		= bcm63xx_ehci_power_on,
-+	.power_off		= bcm63xx_ehci_power_off,
-+	.power_suspend		= bcm63xx_ehci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ehci_device = {
-+	.name		= "ehci-platform",
-+	.id		= -1,
-+	.num_resources	= ARRAY_SIZE(ehci_resources),
-+	.resource	= ehci_resources,
-+	.dev		= {
-+		.platform_data		= &bcm63xx_ehci_pdata,
-+		.dma_mask		= &ehci_dmamask,
-+		.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	},
-+};
-+
-+int __init bcm63xx_ehci_register(void)
-+{
-+	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+		return 0;
-+
-+	ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-+	ehci_resources[0].end = ehci_resources[0].start;
-+	ehci_resources[0].end += RSET_EHCI_SIZE - 1;
-+	ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
-+
-+	return platform_device_register(&bcm63xx_ehci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_EHCI_H_
-+#define BCM63XX_DEV_USB_EHCI_H_
-+
-+int bcm63xx_ehci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/bcm63xx/patches-5.4/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/bcm63xx/patches-5.4/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
deleted file mode 100644
index feb99a1cd7..0000000000
--- a/target/linux/bcm63xx/patches-5.4/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 709ef2034f5ba06da35f89856ad7baf2b7a41287 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:28 +0100
-Subject: [PATCH 10/11] MIPS: BCM63XX: register EHCI controller if board
- enables it
-
-BCM63XX-based board can control the registration of the EHCI controller
-by setting their has_ehci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to register
-the EHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -27,6 +27,7 @@
- #include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ehci.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-@@ -893,6 +894,9 @@ int __init board_register_devices(void)
- 	if (board.has_usbd)
- 		bcm63xx_usbd_register(&board.usbd);
- 
-+	if (board.has_ehci0)
-+		bcm63xx_ehci_register();
-+
- 	if (board.has_ohci0)
- 		bcm63xx_ohci_register();
- 
diff --git a/target/linux/bcm63xx/patches-5.4/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/bcm63xx/patches-5.4/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
deleted file mode 100644
index 5822166485..0000000000
--- a/target/linux/bcm63xx/patches-5.4/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 111bbd770441ab34f9da5bb1d85767a9b75227b4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:30 +0100
-Subject: [PATCH 12/12] MIPS: BCM63XX: EHCI controller does not support
- overcurrent
-
-This patch sets the spurious_oc flag for the BCM63XX EHCI controller as it
-does not support proper overcurrent reporting.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/dev-usb-ehci.c |    1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -61,6 +61,7 @@ static void bcm63xx_ehci_power_off(struc
- static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
- 	.big_endian_desc	= 1,
- 	.big_endian_mmio	= 1,
-+	.spurious_oc		= 1,
- 	.power_on		= bcm63xx_ehci_power_on,
- 	.power_off		= bcm63xx_ehci_power_off,
- 	.power_suspend		= bcm63xx_ehci_power_off,
diff --git a/target/linux/bcm63xx/patches-5.4/130-pinctrl-add-bcm63xx-base-code.patch b/target/linux/bcm63xx/patches-5.4/130-pinctrl-add-bcm63xx-base-code.patch
deleted file mode 100644
index 559ec94c2e..0000000000
--- a/target/linux/bcm63xx/patches-5.4/130-pinctrl-add-bcm63xx-base-code.patch
+++ /dev/null
@@ -1,226 +0,0 @@
-From ab2f33e35e35905a76204138143875251f3e1088 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:07:42 +0200
-Subject: [PATCH 01/13] pinctrl: add bcm63xx base code
-
-Setup directory and add a helper for bcm63xx pinctrl support.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/Kconfig                   |   1 +
- drivers/pinctrl/Makefile                  |   1 +
- drivers/pinctrl/bcm63xx/Kconfig           |   3 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c | 142 ++++++++++++++++++++++++++++++
- drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h |  14 +++
- 7 files changed, 163 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/Kconfig
- create mode 100644 drivers/pinctrl/bcm63xx/Makefile
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h
-
---- a/drivers/pinctrl/Kconfig
-+++ b/drivers/pinctrl/Kconfig
-@@ -387,6 +387,7 @@ config PINCTRL_OCELOT
- source "drivers/pinctrl/actions/Kconfig"
- source "drivers/pinctrl/aspeed/Kconfig"
- source "drivers/pinctrl/bcm/Kconfig"
-+source "drivers/pinctrl/bcm63xx/Kconfig"
- source "drivers/pinctrl/berlin/Kconfig"
- source "drivers/pinctrl/freescale/Kconfig"
- source "drivers/pinctrl/intel/Kconfig"
---- a/drivers/pinctrl/Makefile
-+++ b/drivers/pinctrl/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_PINCTRL_OCELOT)	+= pinctrl-
- obj-y				+= actions/
- obj-$(CONFIG_ARCH_ASPEED)	+= aspeed/
- obj-y				+= bcm/
-+obj-y				+= bcm63xx/
- obj-$(CONFIG_PINCTRL_BERLIN)	+= berlin/
- obj-y				+= freescale/
- obj-$(CONFIG_X86)		+= intel/
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -0,0 +1,3 @@
-+config PINCTRL_BCM63XX
-+	bool
-+	select GPIO_GENERIC
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_PINCTRL_BCM63XX)	+= pinctrl-bcm63xx.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c
-@@ -0,0 +1,155 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/device.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/of_irq.h>
-+
-+#include "pinctrl-bcm63xx.h"
-+#include "../core.h"
-+
-+#define BANK_SIZE	sizeof(u32)
-+#define PINS_PER_BANK	(BANK_SIZE * BITS_PER_BYTE)
-+
-+#ifdef CONFIG_OF
-+static int bcm63xx_gpio_of_xlate(struct gpio_chip *gc,
-+				 const struct of_phandle_args *gpiospec,
-+				 u32 *flags)
-+{
-+	struct gpio_chip *base = gpiochip_get_data(gc);
-+	int pin = gpiospec->args[0];
-+
-+	if (gc != &base[pin / PINS_PER_BANK])
-+		return -EINVAL;
-+
-+	pin = pin % PINS_PER_BANK;
-+
-+	if (pin >= gc->ngpio)
-+		return -EINVAL;
-+
-+	if (flags)
-+		*flags = gpiospec->args[1];
-+
-+	return pin;
-+}
-+#endif
-+
-+static int bcm63xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+	struct gpio_chip *base = gpiochip_get_data(chip);
-+	char irq_name[7]; /* "gpioXX" */
-+
-+	/* FIXME: this is ugly */
-+	sprintf(irq_name, "gpio%d", gpio + PINS_PER_BANK * (chip - base));
-+	return of_irq_get_byname(chip->of_node, irq_name);
-+}
-+
-+static int bcm63xx_setup_gpio(struct device *dev, struct gpio_chip *gc,
-+			      void __iomem *dirout, void __iomem *data,
-+			      size_t sz, int ngpio)
-+
-+{
-+	int banks, chips, i, ret = -EINVAL;
-+
-+	chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK);
-+	banks = sz / BANK_SIZE;
-+
-+	for (i = 0; i < chips; i++) {
-+		int offset, pins;
-+		int reg_offset;
-+		char *label;
-+
-+		label = devm_kasprintf(dev, GFP_KERNEL, "bcm63xx-gpio.%i", i);
-+		if (!label)
-+			return -ENOMEM;
-+
-+		offset = i * PINS_PER_BANK;
-+		pins = min_t(int, ngpio - offset, PINS_PER_BANK);
-+
-+		/* the registers are treated like a huge big endian register */
-+		reg_offset = (banks - i - 1) * BANK_SIZE;
-+
-+		ret = bgpio_init(&gc[i], dev, BANK_SIZE, data + reg_offset,
-+				 NULL, NULL, dirout + reg_offset, NULL,
-+				 BGPIOF_BIG_ENDIAN_BYTE_ORDER);
-+		if (ret)
-+			return ret;
-+
-+		gc[i].request = gpiochip_generic_request;
-+		gc[i].free = gpiochip_generic_free;
-+
-+		if (of_get_property(dev->of_node, "interrupt-names", NULL))
-+			gc[i].to_irq = bcm63xx_gpio_to_irq;
-+
-+#ifdef CONFIG_OF
-+		gc[i].of_gpio_n_cells = 2;
-+		gc[i].of_xlate = bcm63xx_gpio_of_xlate;
-+#endif
-+
-+		gc[i].label = label;
-+		gc[i].ngpio = pins;
-+
-+		devm_gpiochip_add_data(dev, &gc[i], gc);
-+	}
-+
-+	return 0;
-+}
-+
-+static void bcm63xx_setup_pinranges(struct gpio_chip *gc, const char *name,
-+				    int ngpio)
-+{
-+	int i, chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK);
-+
-+	for (i = 0; i < chips; i++) {
-+		int offset, pins;
-+
-+		offset = i * PINS_PER_BANK;
-+		pins = min_t(int, ngpio - offset, PINS_PER_BANK);
-+
-+		gpiochip_add_pin_range(&gc[i], name, 0, offset, pins);
-+	}
-+}
-+
-+struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev,
-+					     struct pinctrl_desc *desc,
-+					     void *priv, struct gpio_chip *gc,
-+					     int ngpio)
-+{
-+	struct pinctrl_dev *pctldev;
-+	struct resource *res;
-+	void __iomem *dirout, *data;
-+	size_t sz;
-+	int ret;
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirout");
-+	dirout = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(dirout))
-+		return ERR_CAST(dirout);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat");
-+	data = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(data))
-+		return ERR_CAST(data);
-+
-+	sz = resource_size(res);
-+
-+	ret = bcm63xx_setup_gpio(&pdev->dev, gc, dirout, data, sz, ngpio);
-+	if (ret)
-+		return ERR_PTR(ret);
-+
-+	pctldev = devm_pinctrl_register(&pdev->dev, desc, priv);
-+	if (IS_ERR(pctldev))
-+		return pctldev;
-+
-+	bcm63xx_setup_pinranges(gc, pinctrl_dev_get_devname(pctldev), ngpio);
-+
-+	dev_info(&pdev->dev, "registered at mmio %p\n", dirout);
-+
-+	return pctldev;
-+}
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h
-@@ -0,0 +1,14 @@
-+#ifndef __PINCTRL_BCM63XX
-+#define __PINCTRL_BCM63XX
-+
-+#include <linux/kernel.h>
-+#include <linux/gpio.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/platform_device.h>
-+
-+struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev,
-+					     struct pinctrl_desc *desc,
-+					     void *priv, struct gpio_chip *gc,
-+					     int ngpio);
-+
-+#endif
diff --git a/target/linux/bcm63xx/patches-5.4/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-5.4/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch
deleted file mode 100644
index 3a2a7811db..0000000000
--- a/target/linux/bcm63xx/patches-5.4/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 4bdd40849632608d5cb7d3a64380cd76e7eea07b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:33:56 +0200
-Subject: [PATCH 02/16] Documentation: add BCM6328 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6328 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6328-pinctrl.txt      | 61 ++++++++++++++++++++++
- 1 file changed, 61 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt
-@@ -0,0 +1,61 @@
-+* Broadcom BCM6328 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6328-pinctrl".
-+- reg: Register specifies of dirout, dat, mode, mux registers.
-+- reg-names: Must be "dirout", "dat", "mode", "mux".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+	compatible = "brcm,bcm6328-pinctrl";
-+	reg = <0x10000080 0x8>,
-+	      <0x10000088 0x8>,
-+	      <0x10000098 0x4>,
-+	      <0x1000009c 0xc>;
-+	reg-names = "dirout", "dat", "mode", "mux";
-+
-+	gpio-controller;
-+	#gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name		pins	functions
-+-----------------------------------------------------------
-+gpio0		0	led
-+gpio1		1	led
-+gpio2		2	led
-+gpio3		3	led
-+gpio4		4	led
-+gpio5		5	led
-+gpio6		6	led, serial_led_data
-+gpio7		7	led, serial_led_clk
-+gpio8		8	led
-+gpio9		9	led
-+gpio10		10	led
-+gpio11		11	led
-+gpio12		12	led
-+gpio13		13	led
-+gpio14		14	led
-+gpio15		15	led
-+gpio16		16	led, pcie_clkreq
-+gpio17		17	led
-+gpio18		18	led
-+gpio19		19	led
-+gpio20		20	led
-+gpio21		21	led
-+gpio22		22	led
-+gpio23		23	led
-+gpio24		24	-
-+gpio25		25	ephy0_act_led
-+gpio26		26	ephy1_act_led
-+gpio27		27	ephy2_act_led
-+gpio28		28	ephy3_act_led
-+gpio29		29	-
-+gpio30		30	-
-+gpio31		31	-
-+hsspi_cs1	-	hsspi_cs1
-+usb_port1	-	usb_host_port, usb_device_port
diff --git a/target/linux/bcm63xx/patches-5.4/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch b/target/linux/bcm63xx/patches-5.4/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch
deleted file mode 100644
index 3c5f15b91f..0000000000
--- a/target/linux/bcm63xx/patches-5.4/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch
+++ /dev/null
@@ -1,495 +0,0 @@
-From 393e9753f6492c1fdf55891ddee60d955ae8b119 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:12:50 +0200
-Subject: [PATCH 03/16] pinctrl: add a pincontrol driver for BCM6328
-
-Add a pincontrol driver for BCM6328. BCM628 supports muxing 32 pins as
-GPIOs, as LEDs for the integrated LED controller, or various other
-functions. Its pincontrol mux registers also control other aspects, like
-switching the second USB port between host and device mode.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c | 456 ++++++++++++++++++++++++++++++
- 3 files changed, 464 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -1,3 +1,10 @@
- config PINCTRL_BCM63XX
- 	bool
- 	select GPIO_GENERIC
-+
-+config PINCTRL_BCM6328
-+	bool "BCM6328 pincontrol driver" if COMPILE_TEST
-+	select PINMUX
-+	select PINCONF
-+	select PINCTRL_BCM63XX
-+	select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1 +1,2 @@
- obj-$(CONFIG_PINCTRL_BCM63XX)	+= pinctrl-bcm63xx.o
-+obj-$(CONFIG_PINCTRL_BCM6328)	+= pinctrl-bcm6328.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c
-@@ -0,0 +1,456 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/machine.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6328_MUX_LO_REG	0x4
-+#define BCM6328_MUX_HI_REG	0x0
-+#define BCM6328_MUX_OTHER_REG	0x8
-+
-+#define BCM6328_NGPIO		32
-+
-+struct bcm6328_pingroup {
-+	const char *name;
-+	const unsigned * const pins;
-+	const unsigned num_pins;
-+};
-+
-+struct bcm6328_function {
-+	const char *name;
-+	const char * const *groups;
-+	const unsigned num_groups;
-+
-+	unsigned mode_val:1;
-+	unsigned mux_val:2;
-+};
-+
-+struct bcm6328_pinctrl {
-+	struct pinctrl_dev *pctldev;
-+	struct pinctrl_desc desc;
-+
-+	void __iomem *mode;
-+	void __iomem *mux[3];
-+
-+	/* register access lock */
-+	spinlock_t lock;
-+
-+	struct gpio_chip gpio;
-+};
-+
-+static const struct pinctrl_pin_desc bcm6328_pins[] = {
-+	PINCTRL_PIN(0, "gpio0"),
-+	PINCTRL_PIN(1, "gpio1"),
-+	PINCTRL_PIN(2, "gpio2"),
-+	PINCTRL_PIN(3, "gpio3"),
-+	PINCTRL_PIN(4, "gpio4"),
-+	PINCTRL_PIN(5, "gpio5"),
-+	PINCTRL_PIN(6, "gpio6"),
-+	PINCTRL_PIN(7, "gpio7"),
-+	PINCTRL_PIN(8, "gpio8"),
-+	PINCTRL_PIN(9, "gpio9"),
-+	PINCTRL_PIN(10, "gpio10"),
-+	PINCTRL_PIN(11, "gpio11"),
-+	PINCTRL_PIN(12, "gpio12"),
-+	PINCTRL_PIN(13, "gpio13"),
-+	PINCTRL_PIN(14, "gpio14"),
-+	PINCTRL_PIN(15, "gpio15"),
-+	PINCTRL_PIN(16, "gpio16"),
-+	PINCTRL_PIN(17, "gpio17"),
-+	PINCTRL_PIN(18, "gpio18"),
-+	PINCTRL_PIN(19, "gpio19"),
-+	PINCTRL_PIN(20, "gpio20"),
-+	PINCTRL_PIN(21, "gpio21"),
-+	PINCTRL_PIN(22, "gpio22"),
-+	PINCTRL_PIN(23, "gpio23"),
-+	PINCTRL_PIN(24, "gpio24"),
-+	PINCTRL_PIN(25, "gpio25"),
-+	PINCTRL_PIN(26, "gpio26"),
-+	PINCTRL_PIN(27, "gpio27"),
-+	PINCTRL_PIN(28, "gpio28"),
-+	PINCTRL_PIN(29, "gpio29"),
-+	PINCTRL_PIN(30, "gpio30"),
-+	PINCTRL_PIN(31, "gpio31"),
-+
-+	/*
-+	 * No idea where they really are; so let's put them according
-+	 * to their mux offsets.
-+	 */
-+	PINCTRL_PIN(36, "hsspi_cs1"),
-+	PINCTRL_PIN(38, "usb_p2"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+
-+static unsigned hsspi_cs1_pins[] = { 36 };
-+static unsigned usb_port1_pins[] = { 38 };
-+
-+#define BCM6328_GROUP(n)					\
-+	{							\
-+		.name = #n,					\
-+		.pins = n##_pins,				\
-+		.num_pins = ARRAY_SIZE(n##_pins),		\
-+	}
-+
-+static struct bcm6328_pingroup bcm6328_groups[] = {
-+	BCM6328_GROUP(gpio0),
-+	BCM6328_GROUP(gpio1),
-+	BCM6328_GROUP(gpio2),
-+	BCM6328_GROUP(gpio3),
-+	BCM6328_GROUP(gpio4),
-+	BCM6328_GROUP(gpio5),
-+	BCM6328_GROUP(gpio6),
-+	BCM6328_GROUP(gpio7),
-+	BCM6328_GROUP(gpio8),
-+	BCM6328_GROUP(gpio9),
-+	BCM6328_GROUP(gpio10),
-+	BCM6328_GROUP(gpio11),
-+	BCM6328_GROUP(gpio12),
-+	BCM6328_GROUP(gpio13),
-+	BCM6328_GROUP(gpio14),
-+	BCM6328_GROUP(gpio15),
-+	BCM6328_GROUP(gpio16),
-+	BCM6328_GROUP(gpio17),
-+	BCM6328_GROUP(gpio18),
-+	BCM6328_GROUP(gpio19),
-+	BCM6328_GROUP(gpio20),
-+	BCM6328_GROUP(gpio21),
-+	BCM6328_GROUP(gpio22),
-+	BCM6328_GROUP(gpio23),
-+	BCM6328_GROUP(gpio24),
-+	BCM6328_GROUP(gpio25),
-+	BCM6328_GROUP(gpio26),
-+	BCM6328_GROUP(gpio27),
-+	BCM6328_GROUP(gpio28),
-+	BCM6328_GROUP(gpio29),
-+	BCM6328_GROUP(gpio30),
-+	BCM6328_GROUP(gpio31),
-+
-+	BCM6328_GROUP(hsspi_cs1),
-+	BCM6328_GROUP(usb_port1),
-+};
-+
-+/* GPIO_MODE */
-+static const char * const led_groups[] = {
-+	"gpio0",
-+	"gpio1",
-+	"gpio2",
-+	"gpio3",
-+	"gpio4",
-+	"gpio5",
-+	"gpio6",
-+	"gpio7",
-+	"gpio8",
-+	"gpio9",
-+	"gpio10",
-+	"gpio11",
-+	"gpio12",
-+	"gpio13",
-+	"gpio14",
-+	"gpio15",
-+	"gpio16",
-+	"gpio17",
-+	"gpio18",
-+	"gpio19",
-+	"gpio20",
-+	"gpio21",
-+	"gpio22",
-+	"gpio23",
-+};
-+
-+/* PINMUX_SEL */
-+static const char * const serial_led_data_groups[] = {
-+	"gpio6",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+	"gpio7",
-+};
-+
-+static const char * const inet_act_led_groups[] = {
-+	"gpio11",
-+};
-+
-+static const char * const pcie_clkreq_groups[] = {
-+	"gpio16",
-+};
-+
-+static const char * const ephy0_act_led_groups[] = {
-+	"gpio25",
-+};
-+
-+static const char * const ephy1_act_led_groups[] = {
-+	"gpio26",
-+};
-+
-+static const char * const ephy2_act_led_groups[] = {
-+	"gpio27",
-+};
-+
-+static const char * const ephy3_act_led_groups[] = {
-+	"gpio28",
-+};
-+
-+static const char * const hsspi_cs1_groups[] = {
-+	"hsspi_cs1"
-+};
-+
-+static const char * const usb_host_port_groups[] = {
-+	"usb_port1",
-+};
-+
-+static const char * const usb_device_port_groups[] = {
-+	"usb_port1",
-+};
-+
-+#define BCM6328_MODE_FUN(n)				\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+		.mode_val = 1,				\
-+	}
-+
-+#define BCM6328_MUX_FUN(n, mux)				\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+		.mux_val = mux,				\
-+	}
-+
-+static const struct bcm6328_function bcm6328_funcs[] = {
-+	BCM6328_MODE_FUN(led),
-+	BCM6328_MUX_FUN(serial_led_data, 2),
-+	BCM6328_MUX_FUN(serial_led_clk, 2),
-+	BCM6328_MUX_FUN(inet_act_led, 1),
-+	BCM6328_MUX_FUN(pcie_clkreq, 2),
-+	BCM6328_MUX_FUN(ephy0_act_led, 1),
-+	BCM6328_MUX_FUN(ephy1_act_led, 1),
-+	BCM6328_MUX_FUN(ephy2_act_led, 1),
-+	BCM6328_MUX_FUN(ephy3_act_led, 1),
-+	BCM6328_MUX_FUN(hsspi_cs1, 2),
-+	BCM6328_MUX_FUN(usb_host_port, 1),
-+	BCM6328_MUX_FUN(usb_device_port, 2),
-+};
-+
-+static int bcm6328_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+	return ARRAY_SIZE(bcm6328_groups);
-+}
-+
-+static const char *bcm6328_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+						  unsigned group)
-+{
-+	return bcm6328_groups[group].name;
-+}
-+
-+static int bcm6328_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+					  unsigned group, const unsigned **pins,
-+					  unsigned *num_pins)
-+{
-+	*pins = bcm6328_groups[group].pins;
-+	*num_pins = bcm6328_groups[group].num_pins;
-+
-+	return 0;
-+}
-+
-+static int bcm6328_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+	return ARRAY_SIZE(bcm6328_funcs);
-+}
-+
-+static const char *bcm6328_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+						 unsigned selector)
-+{
-+	return bcm6328_funcs[selector].name;
-+}
-+
-+static int bcm6328_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+				      unsigned selector,
-+				      const char * const **groups,
-+				      unsigned * const num_groups)
-+{
-+	*groups = bcm6328_funcs[selector].groups;
-+	*num_groups = bcm6328_funcs[selector].num_groups;
-+
-+	return 0;
-+}
-+
-+static void bcm6328_rmw_mux(struct bcm6328_pinctrl *pctl, unsigned pin,
-+			    u32 mode, u32 mux)
-+{
-+	unsigned long flags;
-+	u32 reg;
-+
-+	spin_lock_irqsave(&pctl->lock, flags);
-+	if (pin < 32) {
-+		reg = __raw_readl(pctl->mode);
-+		reg &= ~BIT(pin);
-+		if (mode)
-+			reg |= BIT(pin);
-+		__raw_writel(reg, pctl->mode);
-+	}
-+
-+	reg = __raw_readl(pctl->mux[pin / 16]);
-+	reg &= ~(3UL << ((pin % 16) * 2));
-+	reg |= mux << ((pin % 16) * 2);
-+	__raw_writel(reg, pctl->mux[pin / 16]);
-+
-+	spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static int bcm6328_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+				   unsigned selector, unsigned group)
-+{
-+	struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+	const struct bcm6328_pingroup *grp = &bcm6328_groups[group];
-+	const struct bcm6328_function *f = &bcm6328_funcs[selector];
-+
-+	bcm6328_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val);
-+
-+	return 0;
-+}
-+
-+static int bcm6328_gpio_request_enable(struct pinctrl_dev *pctldev,
-+				       struct pinctrl_gpio_range *range,
-+				       unsigned offset)
-+{
-+	struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+	/* disable all functions using this pin */
-+	bcm6328_rmw_mux(pctl, offset, 0, 0);
-+
-+	return 0;
-+}
-+
-+static struct pinctrl_ops bcm6328_pctl_ops = {
-+	.get_groups_count	= bcm6328_pinctrl_get_group_count,
-+	.get_group_name		= bcm6328_pinctrl_get_group_name,
-+	.get_group_pins		= bcm6328_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+	.dt_node_to_map		= pinconf_generic_dt_node_to_map_pin,
-+	.dt_free_map		= pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6328_pmx_ops = {
-+	.get_functions_count	= bcm6328_pinctrl_get_func_count,
-+	.get_function_name	= bcm6328_pinctrl_get_func_name,
-+	.get_function_groups	= bcm6328_pinctrl_get_groups,
-+	.set_mux		= bcm6328_pinctrl_set_mux,
-+	.gpio_request_enable	= bcm6328_gpio_request_enable,
-+	.strict			= true,
-+};
-+
-+static int bcm6328_pinctrl_probe(struct platform_device *pdev)
-+{
-+	struct bcm6328_pinctrl *pctl;
-+	struct resource *res;
-+	void __iomem *mode, *mux;
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+	mode = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(mode))
-+		return PTR_ERR(mode);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux");
-+	mux = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(mux))
-+		return PTR_ERR(mux);
-+
-+	pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+	if (!pctl)
-+		return -ENOMEM;
-+
-+	spin_lock_init(&pctl->lock);
-+
-+	pctl->mode = mode;
-+	pctl->mux[0] = mux + BCM6328_MUX_LO_REG;
-+	pctl->mux[1] = mux + BCM6328_MUX_HI_REG;
-+	pctl->mux[2] = mux + BCM6328_MUX_OTHER_REG;
-+
-+	pctl->desc.name = dev_name(&pdev->dev);
-+	pctl->desc.owner = THIS_MODULE;
-+	pctl->desc.pctlops = &bcm6328_pctl_ops;
-+	pctl->desc.pmxops = &bcm6328_pmx_ops;
-+
-+	pctl->desc.npins = ARRAY_SIZE(bcm6328_pins);
-+	pctl->desc.pins = bcm6328_pins;
-+
-+	platform_set_drvdata(pdev, pctl);
-+
-+	pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+						 &pctl->gpio, BCM6328_NGPIO);
-+	if (IS_ERR(pctl->pctldev))
-+		return PTR_ERR(pctl->pctldev);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id bcm6328_pinctrl_match[] = {
-+	{ .compatible = "brcm,bcm6328-pinctrl", },
-+	{ },
-+};
-+
-+static struct platform_driver bcm6328_pinctrl_driver = {
-+	.probe = bcm6328_pinctrl_probe,
-+	.driver = {
-+		.name = "bcm6328-pinctrl",
-+		.of_match_table = bcm6328_pinctrl_match,
-+	},
-+};
-+
-+builtin_platform_driver(bcm6328_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-5.4/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-5.4/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch
deleted file mode 100644
index 800f0540cc..0000000000
--- a/target/linux/bcm63xx/patches-5.4/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 962c46bf7f43df730e2d3698930e77958cc6b191 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:35:45 +0200
-Subject: [PATCH 04/16] Documentation: add BCM6348 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6348 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6348-pinctrl.txt      | 32 ++++++++++++++++++++++
- 1 file changed, 32 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6348-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6348-pinctrl.txt
-@@ -0,0 +1,32 @@
-+* Broadcom BCM6348 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6348-pinctrl".
-+- reg: register Specifiers of dirout, dat, mode registers.
-+- reg-names: Must be "dirout", "dat", "mode".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@fffe0080 {
-+	compatible = "brcm,bcm6348-pinctrl";
-+	reg = <0xfffe0080 0x8>,
-+	      <0xfffe0088 0x8>,
-+	      <0xfffe0098 0x4>;
-+	reg-names = "dirout", "dat", "mode";
-+
-+	gpio-controller;
-+	#gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name		pins	functions
-+-----------------------------------------------------------
-+group0		32-36	ext_mii, diag
-+group1		22-31	ext_ephy, mii_snoop, mii_pccard,
-+			spi_master_uart, utopia, diag
-+group2		16-21	pci, diag
-+group3		8-15	ext_mii, utopia, diag
-+group4		0-7	ext_ephy, mii_snoop, legacy_led, utopia, diag
diff --git a/target/linux/bcm63xx/patches-5.4/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch b/target/linux/bcm63xx/patches-5.4/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch
deleted file mode 100644
index 3b613fdca5..0000000000
--- a/target/linux/bcm63xx/patches-5.4/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch
+++ /dev/null
@@ -1,410 +0,0 @@
-From 45444cb631555e2dc16b95d779b10aa075c7482e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:14:13 +0200
-Subject: [PATCH 05/16] pinctrl: add a pincontrol driver for BCM6348
-
-Add a pincotrol driver for BCM6348. BCM6348 allow muxing five groups of
-up to ten gpios into fourteen potential functions. It does not allow
-muxing individual pins. Some functions require more than one group to be
-muxed to the same function.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c | 391 ++++++++++++++++++++++++++++++
- 3 files changed, 399 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -8,3 +8,10 @@ config PINCTRL_BCM6328
- 	select PINCONF
- 	select PINCTRL_BCM63XX
- 	select GENERIC_PINCONF
-+
-+config PINCTRL_BCM6348
-+	bool "BCM6348 pincontrol driver" if COMPILE_TEST
-+	select PINMUX
-+	select PINCONF
-+	select PINCTRL_BCM63XX
-+	select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1,2 +1,3 @@
- obj-$(CONFIG_PINCTRL_BCM63XX)	+= pinctrl-bcm63xx.o
- obj-$(CONFIG_PINCTRL_BCM6328)	+= pinctrl-bcm6328.o
-+obj-$(CONFIG_PINCTRL_BCM6348)	+= pinctrl-bcm6348.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c
-@@ -0,0 +1,370 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/machine.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6348_NGPIO		37
-+
-+#define MAX_GROUP		4
-+#define PINS_PER_GROUP		8
-+#define PIN_TO_GROUP(pin)	(MAX_GROUP - ((pin) / PINS_PER_GROUP))
-+#define GROUP_SHIFT(pin)	(PIN_TO_GROUP(pin) * 4)
-+#define GROUP_MASK(pin)		(0xf << GROUP_SHIFT(pin))
-+
-+struct bcm6348_pingroup {
-+	const char *name;
-+	const unsigned * const pins;
-+	const unsigned num_pins;
-+};
-+
-+struct bcm6348_function {
-+	const char *name;
-+	const char * const *groups;
-+	const unsigned num_groups;
-+	unsigned int value;
-+};
-+
-+struct bcm6348_pinctrl {
-+	struct pinctrl_dev *pctldev;
-+	struct pinctrl_desc desc;
-+
-+	void __iomem *mode;
-+
-+	/* register access lock */
-+	spinlock_t lock;
-+
-+	struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6348_PIN(a, b, group)		\
-+	{					\
-+		.number = a,			\
-+		.name = b,			\
-+		.drv_data = (void *)(group),	\
-+	}
-+
-+static const struct pinctrl_pin_desc bcm6348_pins[] = {
-+	BCM6348_PIN(0, "gpio0", 4),
-+	BCM6348_PIN(1, "gpio1", 4),
-+	BCM6348_PIN(2, "gpio2", 4),
-+	BCM6348_PIN(3, "gpio3", 4),
-+	BCM6348_PIN(4, "gpio4", 4),
-+	BCM6348_PIN(5, "gpio5", 4),
-+	BCM6348_PIN(6, "gpio6", 4),
-+	BCM6348_PIN(7, "gpio7", 4),
-+	BCM6348_PIN(8, "gpio8", 3),
-+	BCM6348_PIN(9, "gpio9", 3),
-+	BCM6348_PIN(10, "gpio10", 3),
-+	BCM6348_PIN(11, "gpio11", 3),
-+	BCM6348_PIN(12, "gpio12", 3),
-+	BCM6348_PIN(13, "gpio13", 3),
-+	BCM6348_PIN(14, "gpio14", 3),
-+	BCM6348_PIN(15, "gpio15", 3),
-+	BCM6348_PIN(16, "gpio16", 2),
-+	BCM6348_PIN(17, "gpio17", 2),
-+	BCM6348_PIN(18, "gpio18", 2),
-+	BCM6348_PIN(19, "gpio19", 2),
-+	BCM6348_PIN(20, "gpio20", 2),
-+	BCM6348_PIN(21, "gpio21", 2),
-+	BCM6348_PIN(22, "gpio22", 1),
-+	BCM6348_PIN(23, "gpio23", 1),
-+	BCM6348_PIN(24, "gpio24", 1),
-+	BCM6348_PIN(25, "gpio25", 1),
-+	BCM6348_PIN(26, "gpio26", 1),
-+	BCM6348_PIN(27, "gpio27", 1),
-+	BCM6348_PIN(28, "gpio28", 1),
-+	BCM6348_PIN(29, "gpio29", 1),
-+	BCM6348_PIN(30, "gpio30", 1),
-+	BCM6348_PIN(31, "gpio31", 1),
-+	BCM6348_PIN(32, "gpio32", 0),
-+	BCM6348_PIN(33, "gpio33", 0),
-+	BCM6348_PIN(34, "gpio34", 0),
-+	BCM6348_PIN(35, "gpio35", 0),
-+	BCM6348_PIN(36, "gpio36", 0),
-+};
-+
-+enum bcm6348_muxes {
-+	BCM6348_MUX_GPIO = 0,
-+	BCM6348_MUX_EXT_EPHY,
-+	BCM6348_MUX_MII_SNOOP,
-+	BCM6348_MUX_LEGACY_LED,
-+	BCM6348_MUX_MII_PCCARD,
-+	BCM6348_MUX_PCI,
-+	BCM6348_MUX_SPI_MASTER_UART,
-+	BCM6348_MUX_EXT_MII,
-+	BCM6348_MUX_UTOPIA,
-+	BCM6348_MUX_DIAG,
-+};
-+
-+static unsigned group0_pins[] = {
-+	32, 33, 34, 35, 36,
-+};
-+
-+static unsigned group1_pins[] = {
-+	22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-+};
-+
-+static unsigned group2_pins[] = {
-+	16, 17, 18, 19, 20, 21,
-+};
-+
-+static unsigned group3_pins[] = {
-+	8, 9, 10, 11, 12, 13, 14, 15,
-+};
-+
-+static unsigned group4_pins[] = {
-+	0, 1, 2, 3, 4, 5, 6, 7,
-+};
-+
-+#define BCM6348_GROUP(n)				\
-+	{						\
-+		.name = #n,				\
-+		.pins = n##_pins,			\
-+		.num_pins = ARRAY_SIZE(n##_pins),	\
-+	} \
-+
-+static struct bcm6348_pingroup bcm6348_groups[] = {
-+	BCM6348_GROUP(group0),
-+	BCM6348_GROUP(group1),
-+	BCM6348_GROUP(group2),
-+	BCM6348_GROUP(group3),
-+	BCM6348_GROUP(group4),
-+};
-+
-+static const char * const ext_mii_groups[] = {
-+	"group0",
-+	"group3",
-+};
-+
-+static const char * const ext_ephy_groups[] = {
-+	"group1",
-+	"group4"
-+};
-+
-+static const char * const mii_snoop_groups[] = {
-+	"group1",
-+	"group4",
-+};
-+
-+static const char * const legacy_led_groups[] = {
-+	"group4",
-+};
-+
-+static const char * const mii_pccard_groups[] = {
-+	"group1",
-+};
-+
-+static const char * const pci_groups[] = {
-+	"group2",
-+};
-+
-+static const char * const spi_master_uart_groups[] = {
-+	"group1",
-+};
-+
-+static const char * const utopia_groups[] = {
-+	"group1",
-+	"group3",
-+	"group4",
-+};
-+
-+static const char * const diag_groups[] = {
-+	"group0",
-+	"group1",
-+	"group2",
-+	"group3",
-+	"group4",
-+};
-+
-+#define BCM6348_FUN(n, f)				\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+		.value = BCM6348_MUX_##f,		\
-+	}
-+
-+static const struct bcm6348_function bcm6348_funcs[] = {
-+	BCM6348_FUN(ext_mii, EXT_MII),
-+	BCM6348_FUN(ext_ephy, EXT_EPHY),
-+	BCM6348_FUN(mii_snoop, MII_SNOOP),
-+	BCM6348_FUN(legacy_led, LEGACY_LED),
-+	BCM6348_FUN(mii_pccard, MII_PCCARD),
-+	BCM6348_FUN(pci, PCI),
-+	BCM6348_FUN(spi_master_uart, SPI_MASTER_UART),
-+	BCM6348_FUN(utopia, UTOPIA),
-+	BCM6348_FUN(diag, DIAG),
-+};
-+
-+static int bcm6348_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+	return ARRAY_SIZE(bcm6348_groups);
-+}
-+
-+static const char *bcm6348_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+						  unsigned group)
-+{
-+	return bcm6348_groups[group].name;
-+}
-+
-+static int bcm6348_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+					  unsigned group, const unsigned **pins,
-+					  unsigned *num_pins)
-+{
-+	*pins = bcm6348_groups[group].pins;
-+	*num_pins = bcm6348_groups[group].num_pins;
-+
-+	return 0;
-+}
-+
-+static int bcm6348_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+	return ARRAY_SIZE(bcm6348_funcs);
-+}
-+
-+static const char *bcm6348_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+						 unsigned selector)
-+{
-+	return bcm6348_funcs[selector].name;
-+}
-+
-+static int bcm6348_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+				      unsigned selector,
-+				      const char * const **groups,
-+				      unsigned * const num_groups)
-+{
-+	*groups = bcm6348_funcs[selector].groups;
-+	*num_groups = bcm6348_funcs[selector].num_groups;
-+
-+	return 0;
-+}
-+
-+static void bcm6348_rmw_mux(struct bcm6348_pinctrl *pctl, u32 mask, u32 val)
-+{
-+	unsigned long flags;
-+	u32 reg;
-+
-+	spin_lock_irqsave(&pctl->lock, flags);
-+
-+	reg = __raw_readl(pctl->mode);
-+	reg &= ~mask;
-+	reg |= val & mask;
-+	__raw_writel(reg, pctl->mode);
-+
-+	spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static int bcm6348_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+				   unsigned selector, unsigned group)
-+{
-+	struct bcm6348_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+	const struct bcm6348_pingroup *grp = &bcm6348_groups[group];
-+	const struct bcm6348_function *f = &bcm6348_funcs[selector];
-+	u32 mask, val;
-+
-+	/*
-+	 * pins n..(n+7) share the same group, so we only need to look at
-+	 * the first pin.
-+	 */
-+	mask = GROUP_MASK(grp->pins[0]);
-+	val = f->value << GROUP_SHIFT(grp->pins[0]);
-+
-+	bcm6348_rmw_mux(pctl, mask, val);
-+
-+	return 0;
-+}
-+
-+static struct pinctrl_ops bcm6348_pctl_ops = {
-+	.get_groups_count	= bcm6348_pinctrl_get_group_count,
-+	.get_group_name		= bcm6348_pinctrl_get_group_name,
-+	.get_group_pins		= bcm6348_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+	.dt_node_to_map		= pinconf_generic_dt_node_to_map_pin,
-+	.dt_free_map		= pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6348_pmx_ops = {
-+	.get_functions_count	= bcm6348_pinctrl_get_func_count,
-+	.get_function_name	= bcm6348_pinctrl_get_func_name,
-+	.get_function_groups	= bcm6348_pinctrl_get_groups,
-+	.set_mux		= bcm6348_pinctrl_set_mux,
-+	.strict			= false,
-+};
-+
-+static int bcm6348_pinctrl_probe(struct platform_device *pdev)
-+{
-+	struct bcm6348_pinctrl *pctl;
-+	struct resource *res;
-+	void __iomem *mode;
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+	mode = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(mode))
-+		return PTR_ERR(mode);
-+
-+	pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+	if (!pctl)
-+		return -ENOMEM;
-+
-+	spin_lock_init(&pctl->lock);
-+
-+	pctl->mode = mode;
-+
-+	/* disable all muxes by default */
-+	__raw_writel(0, pctl->mode);
-+
-+	pctl->desc.name = dev_name(&pdev->dev);
-+	pctl->desc.owner = THIS_MODULE;
-+	pctl->desc.pctlops = &bcm6348_pctl_ops;
-+	pctl->desc.pmxops = &bcm6348_pmx_ops;
-+
-+	pctl->desc.npins = ARRAY_SIZE(bcm6348_pins);
-+	pctl->desc.pins = bcm6348_pins;
-+
-+	platform_set_drvdata(pdev, pctl);
-+
-+	pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+						 pctl->gpio, BCM6348_NGPIO);
-+	if (IS_ERR(pctl->pctldev))
-+		return PTR_ERR(pctl->pctldev);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id bcm6348_pinctrl_match[] = {
-+	{ .compatible = "brcm,bcm6348-pinctrl", },
-+	{ },
-+};
-+
-+static struct platform_driver bcm6348_pinctrl_driver = {
-+	.probe = bcm6348_pinctrl_probe,
-+	.driver = {
-+		.name = "bcm6348-pinctrl",
-+		.of_match_table = bcm6348_pinctrl_match,
-+	},
-+};
-+
-+builtin_platform_driver(bcm6348_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-5.4/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-5.4/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch
deleted file mode 100644
index e8a7479915..0000000000
--- a/target/linux/bcm63xx/patches-5.4/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From c7c8fa7f5b5ee9bea751fa7bdae8ff4acde8f26e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:36:00 +0200
-Subject: [PATCH 06/16] Documentation: add BCM6358 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6358 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6358-pinctrl.txt      | 44 ++++++++++++++++++++++
- 1 file changed, 44 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt
-@@ -0,0 +1,44 @@
-+* Broadcom BCM6358 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6358-pinctrl".
-+- reg: Register specifiers of dirout, dat registers.
-+- reg-names: Must be "dirout", "dat".
-+- brcm,gpiomode: Phandle to the shared gpiomode register.
-+- gpio-controller: Identifies this node as a gpio-controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@fffe0080 {
-+	compatible = "brcm,bcm6358-pinctrl";
-+	reg = <0xfffe0080 0x8>,
-+	      <0xfffe0088 0x8>,
-+	      <0xfffe0098 0x4>;
-+	reg-names = "dirout", "dat";
-+	brcm,gpiomode = <&gpiomode>;
-+
-+	gpio-controller;
-+	#gpio-cells = <2>;
-+};
-+
-+gpiomode: syscon@fffe0098 {
-+	compatible = "brcm,bcm6358-gpiomode", "syscon";
-+	reg = <0xfffe0098 0x4>;
-+	native-endian;
-+};
-+
-+Available pins/groups and functions:
-+
-+name		pins		functions
-+-----------------------------------------------------------
-+ebi_cs_grp	30-31		ebi_cs
-+uart1_grp	28-31		uart1
-+spi_cs_grp	32-33		spi_cs
-+async_modem_grp	12-15		async_modem
-+legacy_led_grp	9-15		legacy_led
-+serial_led_grp	6-7		serial_led
-+led_grp		0-3		led
-+utopia_grp	12-15, 22-31	utopia
-+pwm_syn_clk_grp	8		pwm_syn_clk
-+sys_irq_grp	5		sys_irq
diff --git a/target/linux/bcm63xx/patches-5.4/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch b/target/linux/bcm63xx/patches-5.4/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch
deleted file mode 100644
index 87dc741e21..0000000000
--- a/target/linux/bcm63xx/patches-5.4/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch
+++ /dev/null
@@ -1,436 +0,0 @@
-From fb00ef462f3f8b70ea8902151cc72810fe90b999 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:16:01 +0200
-Subject: [PATCH 07/16] pinctrl: add a pincontrol driver for BCM6358
-
-Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different
-functions onto the GPIO pins. It does not support configuring individual
-pins but only whole groups. These groups may overlap, and still require
-the directions to be set correctly in the GPIO register. In addition the
-functions register controls other, not directly mux related functions.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   8 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c | 393 ++++++++++++++++++++++++++++++
- 3 files changed, 402 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -15,3 +15,11 @@ config PINCTRL_BCM6348
- 	select PINCONF
- 	select PINCTRL_BCM63XX
- 	select GENERIC_PINCONF
-+
-+config PINCTRL_BCM6358
-+	bool "BCM6358 pincontrol driver" if COMPILE_TEST
-+	select PINMUX
-+	select PINCONF
-+	select PINCTRL_BCM63XX
-+	select GENERIC_PINCONF
-+	select MFD_SYSCON
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1,3 +1,4 @@
- obj-$(CONFIG_PINCTRL_BCM63XX)	+= pinctrl-bcm63xx.o
- obj-$(CONFIG_PINCTRL_BCM6328)	+= pinctrl-bcm6328.o
- obj-$(CONFIG_PINCTRL_BCM6348)	+= pinctrl-bcm6348.o
-+obj-$(CONFIG_PINCTRL_BCM6358)	+= pinctrl-bcm6358.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c
-@@ -0,0 +1,393 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/regmap.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+/* GPIO_MODE register */
-+#define BCM6358_MODE_MUX_NONE		0
-+
-+/* overlays on gpio pins */
-+#define BCM6358_MODE_MUX_EBI_CS		BIT(5)
-+#define BCM6358_MODE_MUX_UART1		BIT(6)
-+#define BCM6358_MODE_MUX_SPI_CS		BIT(7)
-+#define BCM6358_MODE_MUX_ASYNC_MODEM	BIT(8)
-+#define BCM6358_MODE_MUX_LEGACY_LED	BIT(9)
-+#define BCM6358_MODE_MUX_SERIAL_LED	BIT(10)
-+#define BCM6358_MODE_MUX_LED		BIT(11)
-+#define BCM6358_MODE_MUX_UTOPIA		BIT(12)
-+#define BCM6358_MODE_MUX_CLKRST		BIT(13)
-+#define BCM6358_MODE_MUX_PWM_SYN_CLK	BIT(14)
-+#define BCM6358_MODE_MUX_SYS_IRQ	BIT(15)
-+
-+#define BCM6358_NGPIO			40
-+
-+struct bcm6358_pingroup {
-+	const char *name;
-+	const unsigned * const pins;
-+	const unsigned num_pins;
-+
-+	const u16 mode_val;
-+
-+	/* non-GPIO function muxes require the gpio direction to be set */
-+	const u16 direction;
-+};
-+
-+struct bcm6358_function {
-+	const char *name;
-+	const char * const *groups;
-+	const unsigned num_groups;
-+};
-+
-+struct bcm6358_pinctrl {
-+	struct device *dev;
-+	struct pinctrl_dev *pctldev;
-+	struct pinctrl_desc desc;
-+
-+	struct regmap_field *overlays;
-+
-+	struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6358_GPIO_PIN(a, b, bit1, bit2, bit3)		\
-+	{							\
-+		.number = a,					\
-+		.name = b,					\
-+		.drv_data = (void *)(BCM6358_MODE_MUX_##bit1 |	\
-+				     BCM6358_MODE_MUX_##bit2 |	\
-+				     BCM6358_MODE_MUX_##bit3),	\
-+	}
-+
-+static const struct pinctrl_pin_desc bcm6358_pins[] = {
-+	BCM6358_GPIO_PIN(0, "gpio0", LED, NONE, NONE),
-+	BCM6358_GPIO_PIN(1, "gpio1", LED, NONE, NONE),
-+	BCM6358_GPIO_PIN(2, "gpio2", LED, NONE, NONE),
-+	BCM6358_GPIO_PIN(3, "gpio3", LED, NONE, NONE),
-+	PINCTRL_PIN(4, "gpio4"),
-+	BCM6358_GPIO_PIN(5, "gpio5", SYS_IRQ, NONE, NONE),
-+	BCM6358_GPIO_PIN(6, "gpio6", SERIAL_LED, NONE, NONE),
-+	BCM6358_GPIO_PIN(7, "gpio7", SERIAL_LED, NONE, NONE),
-+	BCM6358_GPIO_PIN(8, "gpio8", PWM_SYN_CLK, NONE, NONE),
-+	BCM6358_GPIO_PIN(9, "gpio09", LEGACY_LED, NONE, NONE),
-+	BCM6358_GPIO_PIN(10, "gpio10", LEGACY_LED, NONE, NONE),
-+	BCM6358_GPIO_PIN(11, "gpio11", LEGACY_LED, NONE, NONE),
-+	BCM6358_GPIO_PIN(12, "gpio12", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+	BCM6358_GPIO_PIN(13, "gpio13", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+	BCM6358_GPIO_PIN(14, "gpio14", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+	BCM6358_GPIO_PIN(15, "gpio15", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+	PINCTRL_PIN(16, "gpio16"),
-+	PINCTRL_PIN(17, "gpio17"),
-+	PINCTRL_PIN(18, "gpio18"),
-+	PINCTRL_PIN(19, "gpio19"),
-+	PINCTRL_PIN(20, "gpio20"),
-+	PINCTRL_PIN(21, "gpio21"),
-+	BCM6358_GPIO_PIN(22, "gpio22", UTOPIA, NONE, NONE),
-+	BCM6358_GPIO_PIN(23, "gpio23", UTOPIA, NONE, NONE),
-+	BCM6358_GPIO_PIN(24, "gpio24", UTOPIA, NONE, NONE),
-+	BCM6358_GPIO_PIN(25, "gpio25", UTOPIA, NONE, NONE),
-+	BCM6358_GPIO_PIN(26, "gpio26", UTOPIA, NONE, NONE),
-+	BCM6358_GPIO_PIN(27, "gpio27", UTOPIA, NONE, NONE),
-+	BCM6358_GPIO_PIN(28, "gpio28", UTOPIA, UART1, NONE),
-+	BCM6358_GPIO_PIN(29, "gpio29", UTOPIA, UART1, NONE),
-+	BCM6358_GPIO_PIN(30, "gpio30", UTOPIA, UART1, EBI_CS),
-+	BCM6358_GPIO_PIN(31, "gpio31", UTOPIA, UART1, EBI_CS),
-+	BCM6358_GPIO_PIN(32, "gpio32", SPI_CS, NONE, NONE),
-+	BCM6358_GPIO_PIN(33, "gpio33", SPI_CS, NONE, NONE),
-+	PINCTRL_PIN(34, "gpio34"),
-+	PINCTRL_PIN(35, "gpio35"),
-+	PINCTRL_PIN(36, "gpio36"),
-+	PINCTRL_PIN(37, "gpio37"),
-+	PINCTRL_PIN(38, "gpio38"),
-+	PINCTRL_PIN(39, "gpio39"),
-+};
-+
-+static unsigned ebi_cs_grp_pins[] = { 30, 31 };
-+
-+static unsigned uart1_grp_pins[] = { 28, 29, 30, 31 };
-+
-+static unsigned spi_cs_grp_pins[] = { 32, 33 };
-+
-+static unsigned async_modem_grp_pins[] = { 12, 13, 14, 15 };
-+
-+static unsigned serial_led_grp_pins[] = { 6, 7 };
-+
-+static unsigned legacy_led_grp_pins[] = { 9, 10, 11, 12, 13, 14, 15 };
-+
-+static unsigned led_grp_pins[] = { 0, 1, 2, 3 };
-+
-+static unsigned utopia_grp_pins[] = {
-+	12, 13, 14, 15, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-+};
-+
-+static unsigned pwm_syn_clk_grp_pins[] = { 8 };
-+
-+static unsigned sys_irq_grp_pins[] = { 5 };
-+
-+#define BCM6358_GPIO_MUX_GROUP(n, bit, dir)			\
-+	{							\
-+		.name = #n,					\
-+		.pins = n##_pins,				\
-+		.num_pins = ARRAY_SIZE(n##_pins),		\
-+		.mode_val = BCM6358_MODE_MUX_##bit,		\
-+		.direction = dir,				\
-+	}
-+
-+static const struct bcm6358_pingroup bcm6358_groups[] = {
-+	BCM6358_GPIO_MUX_GROUP(ebi_cs_grp, EBI_CS, 0x3),
-+	BCM6358_GPIO_MUX_GROUP(uart1_grp, UART1, 0x2),
-+	BCM6358_GPIO_MUX_GROUP(spi_cs_grp, SPI_CS, 0x6),
-+	BCM6358_GPIO_MUX_GROUP(async_modem_grp, ASYNC_MODEM, 0x6),
-+	BCM6358_GPIO_MUX_GROUP(legacy_led_grp, LEGACY_LED, 0x7f),
-+	BCM6358_GPIO_MUX_GROUP(serial_led_grp, SERIAL_LED, 0x3),
-+	BCM6358_GPIO_MUX_GROUP(led_grp, LED, 0xf),
-+	BCM6358_GPIO_MUX_GROUP(utopia_grp, UTOPIA, 0x000f),
-+	BCM6358_GPIO_MUX_GROUP(pwm_syn_clk_grp, PWM_SYN_CLK, 0x1),
-+	BCM6358_GPIO_MUX_GROUP(sys_irq_grp, SYS_IRQ, 0x1),
-+};
-+
-+static const char * const ebi_cs_groups[] = {
-+	"ebi_cs_grp"
-+};
-+
-+static const char * const uart1_groups[] = {
-+	"uart1_grp"
-+};
-+
-+static const char * const spi_cs_2_3_groups[] = {
-+	"spi_cs_2_3_grp"
-+};
-+
-+static const char * const async_modem_groups[] = {
-+	"async_modem_grp"
-+};
-+
-+static const char * const legacy_led_groups[] = {
-+	"legacy_led_grp",
-+};
-+
-+static const char * const serial_led_groups[] = {
-+	"serial_led_grp",
-+};
-+
-+static const char * const led_groups[] = {
-+	"led_grp",
-+};
-+
-+static const char * const clkrst_groups[] = {
-+	"clkrst_grp",
-+};
-+
-+static const char * const pwm_syn_clk_groups[] = {
-+	"pwm_syn_clk_grp",
-+};
-+
-+static const char * const sys_irq_groups[] = {
-+	"sys_irq_grp",
-+};
-+
-+#define BCM6358_FUN(n)					\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+	}
-+
-+static const struct bcm6358_function bcm6358_funcs[] = {
-+	BCM6358_FUN(ebi_cs),
-+	BCM6358_FUN(uart1),
-+	BCM6358_FUN(spi_cs_2_3),
-+	BCM6358_FUN(async_modem),
-+	BCM6358_FUN(legacy_led),
-+	BCM6358_FUN(serial_led),
-+	BCM6358_FUN(led),
-+	BCM6358_FUN(clkrst),
-+	BCM6358_FUN(pwm_syn_clk),
-+	BCM6358_FUN(sys_irq),
-+};
-+
-+static int bcm6358_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+	return ARRAY_SIZE(bcm6358_groups);
-+}
-+
-+static const char *bcm6358_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+						  unsigned group)
-+{
-+	return bcm6358_groups[group].name;
-+}
-+
-+static int bcm6358_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+					  unsigned group, const unsigned **pins,
-+					  unsigned *num_pins)
-+{
-+	*pins = bcm6358_groups[group].pins;
-+	*num_pins = bcm6358_groups[group].num_pins;
-+
-+	return 0;
-+}
-+
-+static int bcm6358_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+	return ARRAY_SIZE(bcm6358_funcs);
-+}
-+
-+static const char *bcm6358_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+						 unsigned selector)
-+{
-+	return bcm6358_funcs[selector].name;
-+}
-+
-+static int bcm6358_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+				      unsigned selector,
-+				      const char * const **groups,
-+				      unsigned * const num_groups)
-+{
-+	*groups = bcm6358_funcs[selector].groups;
-+	*num_groups = bcm6358_funcs[selector].num_groups;
-+
-+	return 0;
-+}
-+
-+static int bcm6358_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+				   unsigned selector, unsigned group)
-+{
-+	struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+	const struct bcm6358_pingroup *grp = &bcm6358_groups[group];
-+	u32 val = grp->mode_val;
-+	u32 mask = val;
-+	unsigned pin;
-+
-+	for (pin = 0; pin < grp->num_pins; pin++)
-+		mask |= (unsigned long)bcm6358_pins[pin].drv_data;
-+
-+	regmap_field_update_bits(pctl->overlays, mask, val);
-+
-+	for (pin = 0; pin < grp->num_pins; pin++) {
-+		int hw_gpio = bcm6358_pins[pin].number;
-+		struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32];
-+
-+		if (grp->direction & BIT(pin))
-+			gc->direction_output(gc, hw_gpio % 32, 0);
-+		else
-+			gc->direction_input(gc, hw_gpio % 32);
-+	}
-+
-+	return 0;
-+}
-+
-+static int bcm6358_gpio_request_enable(struct pinctrl_dev *pctldev,
-+				       struct pinctrl_gpio_range *range,
-+				       unsigned offset)
-+{
-+	struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+	u32 mask;
-+
-+	mask = (unsigned long)bcm6358_pins[offset].drv_data;
-+	if (!mask)
-+		return 0;
-+
-+	/* disable all functions using this pin */
-+	return regmap_field_update_bits(pctl->overlays, mask, 0);
-+}
-+
-+static struct pinctrl_ops bcm6358_pctl_ops = {
-+	.get_groups_count	= bcm6358_pinctrl_get_group_count,
-+	.get_group_name		= bcm6358_pinctrl_get_group_name,
-+	.get_group_pins		= bcm6358_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+	.dt_node_to_map		= pinconf_generic_dt_node_to_map_pin,
-+	.dt_free_map		= pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6358_pmx_ops = {
-+	.get_functions_count	= bcm6358_pinctrl_get_func_count,
-+	.get_function_name	= bcm6358_pinctrl_get_func_name,
-+	.get_function_groups	= bcm6358_pinctrl_get_groups,
-+	.set_mux		= bcm6358_pinctrl_set_mux,
-+	.gpio_request_enable	= bcm6358_gpio_request_enable,
-+	.strict			= true,
-+};
-+
-+static int bcm6358_pinctrl_probe(struct platform_device *pdev)
-+{
-+	struct bcm6358_pinctrl *pctl;
-+	struct regmap *mode;
-+	struct reg_field overlays = REG_FIELD(0, 0, 15);
-+
-+	if (pdev->dev.of_node)
-+		mode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+						       "brcm,gpiomode");
-+	else
-+		mode = syscon_regmap_lookup_by_pdevname("syscon.fffe0098");
-+
-+	if (IS_ERR(mode))
-+		return PTR_ERR(mode);
-+
-+	pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+	if (!pctl)
-+		return -ENOMEM;
-+
-+	pctl->overlays = devm_regmap_field_alloc(&pdev->dev, mode, overlays);
-+	if (IS_ERR(pctl->overlays))
-+		return PTR_ERR(pctl->overlays);
-+
-+	/* disable all muxes by default */
-+	regmap_field_write(pctl->overlays, 0);
-+
-+	pctl->desc.name = dev_name(&pdev->dev);
-+	pctl->desc.owner = THIS_MODULE;
-+	pctl->desc.pctlops = &bcm6358_pctl_ops;
-+	pctl->desc.pmxops = &bcm6358_pmx_ops;
-+
-+	pctl->desc.npins = ARRAY_SIZE(bcm6358_pins);
-+	pctl->desc.pins = bcm6358_pins;
-+
-+	platform_set_drvdata(pdev, pctl);
-+
-+	pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+						 pctl->gpio, BCM6358_NGPIO);
-+	if (IS_ERR(pctl->pctldev))
-+		return PTR_ERR(pctl->pctldev);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id bcm6358_pinctrl_match[] = {
-+	{ .compatible = "brcm,bcm6358-pinctrl", },
-+	{ },
-+};
-+
-+static struct platform_driver bcm6358_pinctrl_driver = {
-+	.probe = bcm6358_pinctrl_probe,
-+	.driver = {
-+		.name = "bcm6358-pinctrl",
-+		.of_match_table = bcm6358_pinctrl_match,
-+	},
-+};
-+
-+builtin_platform_driver(bcm6358_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-5.4/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-5.4/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch
deleted file mode 100644
index 9fc424cb4c..0000000000
--- a/target/linux/bcm63xx/patches-5.4/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From ba03ea8ada2ca71c9095d96a1e4085c2c5cf0e69 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:36:18 +0200
-Subject: [PATCH 08/16] Documentation: add BCM6362 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6362 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6362-pinctrl.txt      | 79 ++++++++++++++++++++++
- 1 file changed, 79 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt
-@@ -0,0 +1,79 @@
-+* Broadcom BCM6362 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6362-pinctrl"
-+- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers.
-+- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+	compatible = "brcm,bcm6362-pinctrl";
-+	reg = <0x10000080 0x8>,
-+	      <0x10000088 0x8>,
-+	      <0x10000090 0x4>,
-+	      <0x10000098 0x4>,
-+	      <0x1000009c 0x4>,
-+	      <0x100000b8 0x4>;
-+	reg-names = "dirout", "dat", "led",
-+		    "mode", "ctrl", "basemode";
-+
-+	gpio-controller;
-+	#gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name		pins		functions
-+-----------------------------------------------------------
-+gpio0		0		led, usb_device_led
-+gpio1		1		led, sys_irq
-+gpio2		2		led, serial_led_clk
-+gpio3		3		led, serial_led_data
-+gpio4		4		led, robosw_led_data
-+gpio5		5		led, robosw_led_clk
-+gpio6		6		led, robosw_led0
-+gpio7		7		led, robosw_led1
-+gpio8		8		led, inet_led
-+gpio9		9		led, spi_cs2
-+gpio10		10		led, spi_cs3
-+gpio11		11		led, ntr_pulse
-+gpio12		12		led, uart1_scts
-+gpio13		13		led, uart1_srts
-+gpio14		14		led, uart1_sdin
-+gpio15		15		led, uart1_sdout
-+gpio16		16		led, adsl_spi_miso
-+gpio17		17		led, adsl_spi_mosi
-+gpio18		18		led, adsl_spi_clk
-+gpio19		19		led, adsl_spi_cs
-+gpio20		20		led, ephy0_led
-+gpio21		21		led, ephy1_led
-+gpio22		22		led, ephy2_led
-+gpio23		23		led, ephy3_led
-+gpio24		24		ext_irq0
-+gpio25		25		ext_irq1
-+gpio26		26		ext_irq2
-+gpio27		27		ext_irq3
-+gpio28		28		-
-+gpio29		29		-
-+gpio30		30		-
-+gpio31		31		-
-+gpio32		32		wifi
-+gpio33		33		wifi
-+gpio34		34		wifi
-+gpio35		35		wifi
-+gpio36		36		wifi
-+gpio37		37		wifi
-+gpio38		38		wifi
-+gpio39		39		wifi
-+gpio40		40		wifi
-+gpio41		41		wifi
-+gpio42		42		wifi
-+gpio43		43		wifi
-+gpio44		44		wifi
-+gpio45		45		wifi
-+gpio46		46		wifi
-+gpio47		47		wifi
-+nand_grp	8, 12-23, 27	nand
diff --git a/target/linux/bcm63xx/patches-5.4/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch b/target/linux/bcm63xx/patches-5.4/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch
deleted file mode 100644
index 726a97f245..0000000000
--- a/target/linux/bcm63xx/patches-5.4/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch
+++ /dev/null
@@ -1,733 +0,0 @@
-From eea6b96701d734095e2f823f3a82d9b063f553ae Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:17:20 +0200
-Subject: [PATCH 09/16] pinctrl: add a pincontrol driver for BCM6362
-
-Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual
-GPIO pins to the LED controller, to be available by the integrated
-wifi, or other functions. It also supports overlay groups, of which
-only NAND is documented.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c | 692 ++++++++++++++++++++++++++++++
- 3 files changed, 700 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -23,3 +23,10 @@ config PINCTRL_BCM6358
- 	select PINCTRL_BCM63XX
- 	select GENERIC_PINCONF
- 	select MFD_SYSCON
-+
-+config PINCTRL_BCM6362
-+	bool "BCM6362 pincontrol driver" if COMPILE_TEST
-+	select PINMUX
-+	select PINCONF
-+	select PINCTRL_BCM63XX
-+	select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -2,3 +2,4 @@ obj-$(CONFIG_PINCTRL_BCM63XX)	+= pinctrl
- obj-$(CONFIG_PINCTRL_BCM6328)	+= pinctrl-bcm6328.o
- obj-$(CONFIG_PINCTRL_BCM6348)	+= pinctrl-bcm6348.o
- obj-$(CONFIG_PINCTRL_BCM6358)	+= pinctrl-bcm6358.o
-+obj-$(CONFIG_PINCTRL_BCM6362)	+= pinctrl-bcm6362.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c
-@@ -0,0 +1,692 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6362_NGPIO	48
-+
-+/* GPIO_BASEMODE register */
-+#define BASEMODE_NAND	BIT(2)
-+
-+enum bcm6362_pinctrl_reg {
-+	BCM6362_LEDCTRL,
-+	BCM6362_MODE,
-+	BCM6362_CTRL,
-+	BCM6362_BASEMODE,
-+};
-+
-+struct bcm6362_pingroup {
-+	const char *name;
-+	const unsigned * const pins;
-+	const unsigned num_pins;
-+};
-+
-+struct bcm6362_function {
-+	const char *name;
-+	const char * const *groups;
-+	const unsigned num_groups;
-+
-+	enum bcm6362_pinctrl_reg reg;
-+	u32 basemode_mask;
-+};
-+
-+struct bcm6362_pinctrl {
-+	struct pinctrl_dev *pctldev;
-+	struct pinctrl_desc desc;
-+
-+	void __iomem *led;
-+	void __iomem *mode;
-+	void __iomem *ctrl;
-+	void __iomem *basemode;
-+
-+	/* register access lock */
-+	spinlock_t lock;
-+
-+	struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6362_PIN(a, b, mask)			\
-+	{					\
-+		.number = a,			\
-+		.name = b,			\
-+		.drv_data = (void *)(mask),	\
-+	}
-+
-+static const struct pinctrl_pin_desc bcm6362_pins[] = {
-+	PINCTRL_PIN(0, "gpio0"),
-+	PINCTRL_PIN(1, "gpio1"),
-+	PINCTRL_PIN(2, "gpio2"),
-+	PINCTRL_PIN(3, "gpio3"),
-+	PINCTRL_PIN(4, "gpio4"),
-+	PINCTRL_PIN(5, "gpio5"),
-+	PINCTRL_PIN(6, "gpio6"),
-+	PINCTRL_PIN(7, "gpio7"),
-+	BCM6362_PIN(8, "gpio8", BASEMODE_NAND),
-+	PINCTRL_PIN(9, "gpio9"),
-+	PINCTRL_PIN(10, "gpio10"),
-+	PINCTRL_PIN(11, "gpio11"),
-+	BCM6362_PIN(12, "gpio12", BASEMODE_NAND),
-+	BCM6362_PIN(13, "gpio13", BASEMODE_NAND),
-+	BCM6362_PIN(14, "gpio14", BASEMODE_NAND),
-+	BCM6362_PIN(15, "gpio15", BASEMODE_NAND),
-+	BCM6362_PIN(16, "gpio16", BASEMODE_NAND),
-+	BCM6362_PIN(17, "gpio17", BASEMODE_NAND),
-+	BCM6362_PIN(18, "gpio18", BASEMODE_NAND),
-+	BCM6362_PIN(19, "gpio19", BASEMODE_NAND),
-+	BCM6362_PIN(20, "gpio20", BASEMODE_NAND),
-+	BCM6362_PIN(21, "gpio21", BASEMODE_NAND),
-+	BCM6362_PIN(22, "gpio22", BASEMODE_NAND),
-+	BCM6362_PIN(23, "gpio23", BASEMODE_NAND),
-+	PINCTRL_PIN(24, "gpio24"),
-+	PINCTRL_PIN(25, "gpio25"),
-+	PINCTRL_PIN(26, "gpio26"),
-+	BCM6362_PIN(27, "gpio27", BASEMODE_NAND),
-+	PINCTRL_PIN(28, "gpio28"),
-+	PINCTRL_PIN(29, "gpio29"),
-+	PINCTRL_PIN(30, "gpio30"),
-+	PINCTRL_PIN(31, "gpio31"),
-+	PINCTRL_PIN(32, "gpio32"),
-+	PINCTRL_PIN(33, "gpio33"),
-+	PINCTRL_PIN(34, "gpio34"),
-+	PINCTRL_PIN(35, "gpio35"),
-+	PINCTRL_PIN(36, "gpio36"),
-+	PINCTRL_PIN(37, "gpio37"),
-+	PINCTRL_PIN(38, "gpio38"),
-+	PINCTRL_PIN(39, "gpio39"),
-+	PINCTRL_PIN(40, "gpio40"),
-+	PINCTRL_PIN(41, "gpio41"),
-+	PINCTRL_PIN(42, "gpio42"),
-+	PINCTRL_PIN(43, "gpio43"),
-+	PINCTRL_PIN(44, "gpio44"),
-+	PINCTRL_PIN(45, "gpio45"),
-+	PINCTRL_PIN(46, "gpio46"),
-+	PINCTRL_PIN(47, "gpio47"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned gpio32_pins[] = { 32 };
-+static unsigned gpio33_pins[] = { 33 };
-+static unsigned gpio34_pins[] = { 34 };
-+static unsigned gpio35_pins[] = { 35 };
-+static unsigned gpio36_pins[] = { 36 };
-+static unsigned gpio37_pins[] = { 37 };
-+static unsigned gpio38_pins[] = { 38 };
-+static unsigned gpio39_pins[] = { 39 };
-+static unsigned gpio40_pins[] = { 40 };
-+static unsigned gpio41_pins[] = { 41 };
-+static unsigned gpio42_pins[] = { 42 };
-+static unsigned gpio43_pins[] = { 43 };
-+static unsigned gpio44_pins[] = { 44 };
-+static unsigned gpio45_pins[] = { 45 };
-+static unsigned gpio46_pins[] = { 46 };
-+static unsigned gpio47_pins[] = { 47 };
-+
-+static unsigned nand_grp_pins[] = {
-+	8, 12, 13, 14, 15, 16, 17,
-+	18, 19, 20, 21, 22, 23, 27,
-+};
-+
-+#define BCM6362_GROUP(n)				\
-+	{						\
-+		.name = #n,				\
-+		.pins = n##_pins,			\
-+		.num_pins = ARRAY_SIZE(n##_pins),	\
-+	}
-+
-+static struct bcm6362_pingroup bcm6362_groups[] = {
-+	BCM6362_GROUP(gpio0),
-+	BCM6362_GROUP(gpio1),
-+	BCM6362_GROUP(gpio2),
-+	BCM6362_GROUP(gpio3),
-+	BCM6362_GROUP(gpio4),
-+	BCM6362_GROUP(gpio5),
-+	BCM6362_GROUP(gpio6),
-+	BCM6362_GROUP(gpio7),
-+	BCM6362_GROUP(gpio8),
-+	BCM6362_GROUP(gpio9),
-+	BCM6362_GROUP(gpio10),
-+	BCM6362_GROUP(gpio11),
-+	BCM6362_GROUP(gpio12),
-+	BCM6362_GROUP(gpio13),
-+	BCM6362_GROUP(gpio14),
-+	BCM6362_GROUP(gpio15),
-+	BCM6362_GROUP(gpio16),
-+	BCM6362_GROUP(gpio17),
-+	BCM6362_GROUP(gpio18),
-+	BCM6362_GROUP(gpio19),
-+	BCM6362_GROUP(gpio20),
-+	BCM6362_GROUP(gpio21),
-+	BCM6362_GROUP(gpio22),
-+	BCM6362_GROUP(gpio23),
-+	BCM6362_GROUP(gpio24),
-+	BCM6362_GROUP(gpio25),
-+	BCM6362_GROUP(gpio26),
-+	BCM6362_GROUP(gpio27),
-+	BCM6362_GROUP(gpio28),
-+	BCM6362_GROUP(gpio29),
-+	BCM6362_GROUP(gpio30),
-+	BCM6362_GROUP(gpio31),
-+	BCM6362_GROUP(gpio32),
-+	BCM6362_GROUP(gpio33),
-+	BCM6362_GROUP(gpio34),
-+	BCM6362_GROUP(gpio35),
-+	BCM6362_GROUP(gpio36),
-+	BCM6362_GROUP(gpio37),
-+	BCM6362_GROUP(gpio38),
-+	BCM6362_GROUP(gpio39),
-+	BCM6362_GROUP(gpio40),
-+	BCM6362_GROUP(gpio41),
-+	BCM6362_GROUP(gpio42),
-+	BCM6362_GROUP(gpio43),
-+	BCM6362_GROUP(gpio44),
-+	BCM6362_GROUP(gpio45),
-+	BCM6362_GROUP(gpio46),
-+	BCM6362_GROUP(gpio47),
-+	BCM6362_GROUP(nand_grp),
-+};
-+
-+static const char * const led_groups[] = {
-+	"gpio0",
-+	"gpio1",
-+	"gpio2",
-+	"gpio3",
-+	"gpio4",
-+	"gpio5",
-+	"gpio6",
-+	"gpio7",
-+	"gpio8",
-+	"gpio9",
-+	"gpio10",
-+	"gpio11",
-+	"gpio12",
-+	"gpio13",
-+	"gpio14",
-+	"gpio15",
-+	"gpio16",
-+	"gpio17",
-+	"gpio18",
-+	"gpio19",
-+	"gpio20",
-+	"gpio21",
-+	"gpio22",
-+	"gpio23",
-+};
-+
-+static const char * const usb_device_led_groups[] = {
-+	"gpio0",
-+};
-+
-+static const char * const sys_irq_groups[] = {
-+	"gpio1",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+	"gpio2",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+	"gpio3",
-+};
-+
-+static const char * const robosw_led_data_groups[] = {
-+	"gpio4",
-+};
-+
-+static const char * const robosw_led_clk_groups[] = {
-+	"gpio5",
-+};
-+
-+static const char * const robosw_led0_groups[] = {
-+	"gpio6",
-+};
-+
-+static const char * const robosw_led1_groups[] = {
-+	"gpio7",
-+};
-+
-+static const char * const inet_led_groups[] = {
-+	"gpio8",
-+};
-+
-+static const char * const spi_cs2_groups[] = {
-+	"gpio9",
-+};
-+
-+static const char * const spi_cs3_groups[] = {
-+	"gpio10",
-+};
-+
-+static const char * const ntr_pulse_groups[] = {
-+	"gpio11",
-+};
-+
-+static const char * const uart1_scts_groups[] = {
-+	"gpio12",
-+};
-+
-+static const char * const uart1_srts_groups[] = {
-+	"gpio13",
-+};
-+
-+static const char * const uart1_sdin_groups[] = {
-+	"gpio14",
-+};
-+
-+static const char * const uart1_sdout_groups[] = {
-+	"gpio15",
-+};
-+
-+static const char * const adsl_spi_miso_groups[] = {
-+	"gpio16",
-+};
-+
-+static const char * const adsl_spi_mosi_groups[] = {
-+	"gpio17",
-+};
-+
-+static const char * const adsl_spi_clk_groups[] = {
-+	"gpio18",
-+};
-+
-+static const char * const adsl_spi_cs_groups[] = {
-+	"gpio19",
-+};
-+
-+static const char * const ephy0_led_groups[] = {
-+	"gpio20",
-+};
-+
-+static const char * const ephy1_led_groups[] = {
-+	"gpio21",
-+};
-+
-+static const char * const ephy2_led_groups[] = {
-+	"gpio22",
-+};
-+
-+static const char * const ephy3_led_groups[] = {
-+	"gpio23",
-+};
-+
-+static const char * const ext_irq0_groups[] = {
-+	"gpio24",
-+};
-+
-+static const char * const ext_irq1_groups[] = {
-+	"gpio25",
-+};
-+
-+static const char * const ext_irq2_groups[] = {
-+	"gpio26",
-+};
-+
-+static const char * const ext_irq3_groups[] = {
-+	"gpio27",
-+};
-+
-+static const char * const wifi_groups[] = {
-+	"gpio32",
-+	"gpio33",
-+	"gpio34",
-+	"gpio35",
-+	"gpio36",
-+	"gpio37",
-+	"gpio38",
-+	"gpio39",
-+	"gpio40",
-+	"gpio41",
-+	"gpio42",
-+	"gpio43",
-+	"gpio44",
-+	"gpio45",
-+	"gpio46",
-+	"gpio47",
-+};
-+
-+static const char * const nand_groups[] = {
-+	"nand_grp",
-+};
-+
-+#define BCM6362_LED_FUN(n)				\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+		.reg = BCM6362_LEDCTRL,			\
-+	}
-+
-+#define BCM6362_MODE_FUN(n)				\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+		.reg = BCM6362_MODE,			\
-+	}
-+
-+#define BCM6362_CTRL_FUN(n)				\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+		.reg = BCM6362_CTRL,			\
-+	}
-+
-+#define BCM6362_BASEMODE_FUN(n, mask)			\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+		.reg = BCM6362_BASEMODE,		\
-+		.basemode_mask = (mask),		\
-+	}
-+
-+static const struct bcm6362_function bcm6362_funcs[] = {
-+	BCM6362_LED_FUN(led),
-+	BCM6362_MODE_FUN(usb_device_led),
-+	BCM6362_MODE_FUN(sys_irq),
-+	BCM6362_MODE_FUN(serial_led_clk),
-+	BCM6362_MODE_FUN(serial_led_data),
-+	BCM6362_MODE_FUN(robosw_led_data),
-+	BCM6362_MODE_FUN(robosw_led_clk),
-+	BCM6362_MODE_FUN(robosw_led0),
-+	BCM6362_MODE_FUN(robosw_led1),
-+	BCM6362_MODE_FUN(inet_led),
-+	BCM6362_MODE_FUN(spi_cs2),
-+	BCM6362_MODE_FUN(spi_cs3),
-+	BCM6362_MODE_FUN(ntr_pulse),
-+	BCM6362_MODE_FUN(uart1_scts),
-+	BCM6362_MODE_FUN(uart1_srts),
-+	BCM6362_MODE_FUN(uart1_sdin),
-+	BCM6362_MODE_FUN(uart1_sdout),
-+	BCM6362_MODE_FUN(adsl_spi_miso),
-+	BCM6362_MODE_FUN(adsl_spi_mosi),
-+	BCM6362_MODE_FUN(adsl_spi_clk),
-+	BCM6362_MODE_FUN(adsl_spi_cs),
-+	BCM6362_MODE_FUN(ephy0_led),
-+	BCM6362_MODE_FUN(ephy1_led),
-+	BCM6362_MODE_FUN(ephy2_led),
-+	BCM6362_MODE_FUN(ephy3_led),
-+	BCM6362_MODE_FUN(ext_irq0),
-+	BCM6362_MODE_FUN(ext_irq1),
-+	BCM6362_MODE_FUN(ext_irq2),
-+	BCM6362_MODE_FUN(ext_irq3),
-+	BCM6362_CTRL_FUN(wifi),
-+	BCM6362_BASEMODE_FUN(nand, BASEMODE_NAND),
-+};
-+
-+static int bcm6362_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+	return ARRAY_SIZE(bcm6362_groups);
-+}
-+
-+static const char *bcm6362_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+						  unsigned group)
-+{
-+	return bcm6362_groups[group].name;
-+}
-+
-+static int bcm6362_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+					  unsigned group, const unsigned **pins,
-+					  unsigned *num_pins)
-+{
-+	*pins = bcm6362_groups[group].pins;
-+	*num_pins = bcm6362_groups[group].num_pins;
-+
-+	return 0;
-+}
-+
-+static int bcm6362_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+	return ARRAY_SIZE(bcm6362_funcs);
-+}
-+
-+static const char *bcm6362_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+						 unsigned selector)
-+{
-+	return bcm6362_funcs[selector].name;
-+}
-+
-+static int bcm6362_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+				      unsigned selector,
-+				      const char * const **groups,
-+				      unsigned * const num_groups)
-+{
-+	*groups = bcm6362_funcs[selector].groups;
-+	*num_groups = bcm6362_funcs[selector].num_groups;
-+
-+	return 0;
-+}
-+
-+static void bcm6362_rmw_mux(struct bcm6362_pinctrl *pctl, void __iomem *reg,
-+			    u32 mask, u32 val)
-+{
-+	unsigned long flags;
-+	u32 tmp;
-+
-+	spin_lock_irqsave(&pctl->lock, flags);
-+	tmp = __raw_readl(reg);
-+	tmp &= ~mask;
-+	tmp |= val & mask;
-+	__raw_writel(tmp, reg);
-+
-+	spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static void bcm6362_set_gpio(struct bcm6362_pinctrl *pctl, unsigned pin)
-+{
-+	const struct pinctrl_pin_desc *desc = &bcm6362_pins[pin];
-+	u32 mask = BIT(pin % 32);
-+
-+	if (desc->drv_data)
-+		bcm6362_rmw_mux(pctl, pctl->basemode, (u32)desc->drv_data, 0);
-+
-+	if (pin < 32) {
-+		/* base mode 0 => gpio 1 => mux function */
-+		bcm6362_rmw_mux(pctl, pctl->mode, mask, 0);
-+
-+		/* pins 0-23 might be muxed to led */
-+		if (pin < 24)
-+			bcm6362_rmw_mux(pctl, pctl->led, mask, 0);
-+	} else {
-+		/* ctrl reg 0 => wifi function 1 => gpio */
-+		bcm6362_rmw_mux(pctl, pctl->ctrl, mask, mask);
-+	}
-+}
-+
-+static int bcm6362_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+				   unsigned selector, unsigned group)
-+{
-+	struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+	const struct bcm6362_pingroup *grp = &bcm6362_groups[group];
-+	const struct bcm6362_function *f = &bcm6362_funcs[selector];
-+	unsigned i;
-+	void __iomem *reg;
-+	u32 val, mask;
-+
-+	for (i = 0; i < grp->num_pins; i++)
-+		bcm6362_set_gpio(pctl, grp->pins[i]);
-+
-+	switch (f->reg) {
-+	case BCM6362_LEDCTRL:
-+		reg = pctl->led;
-+		mask = BIT(grp->pins[0]);
-+		val = BIT(grp->pins[0]);
-+		break;
-+	case BCM6362_MODE:
-+		reg = pctl->ctrl;
-+		mask = BIT(grp->pins[0]);
-+		val = BIT(grp->pins[0]);
-+		break;
-+	case BCM6362_CTRL:
-+		reg = pctl->ctrl;
-+		mask = BIT(grp->pins[0]);
-+		val = 0;
-+		break;
-+	case BCM6362_BASEMODE:
-+		reg = pctl->basemode;
-+		mask = f->basemode_mask;
-+		val = f->basemode_mask;
-+		break;
-+	default:
-+		WARN_ON(1);
-+		return -EINVAL;
-+	}
-+
-+	bcm6362_rmw_mux(pctl, reg, mask, val);
-+
-+	return 0;
-+}
-+
-+static int bcm6362_gpio_request_enable(struct pinctrl_dev *pctldev,
-+				       struct pinctrl_gpio_range *range,
-+				       unsigned offset)
-+{
-+	struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+	/* disable all functions using this pin */
-+	bcm6362_set_gpio(pctl, offset);
-+
-+	return 0;
-+}
-+
-+static struct pinctrl_ops bcm6362_pctl_ops = {
-+	.get_groups_count	= bcm6362_pinctrl_get_group_count,
-+	.get_group_name		= bcm6362_pinctrl_get_group_name,
-+	.get_group_pins		= bcm6362_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+	.dt_node_to_map		= pinconf_generic_dt_node_to_map_pin,
-+	.dt_free_map		= pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6362_pmx_ops = {
-+	.get_functions_count	= bcm6362_pinctrl_get_func_count,
-+	.get_function_name	= bcm6362_pinctrl_get_func_name,
-+	.get_function_groups	= bcm6362_pinctrl_get_groups,
-+	.set_mux		= bcm6362_pinctrl_set_mux,
-+	.gpio_request_enable	= bcm6362_gpio_request_enable,
-+	.strict			= true,
-+};
-+
-+static int bcm6362_pinctrl_probe(struct platform_device *pdev)
-+{
-+	struct bcm6362_pinctrl *pctl;
-+	struct resource *res;
-+	void __iomem *led, *mode, *ctrl, *basemode;
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led");
-+	led = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(led))
-+		return PTR_ERR(led);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+	mode = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(mode))
-+		return PTR_ERR(mode);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
-+	ctrl = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(ctrl))
-+		return PTR_ERR(ctrl);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode");
-+	basemode = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(basemode))
-+		return PTR_ERR(basemode);
-+
-+	pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+	if (!pctl)
-+		return -ENOMEM;
-+
-+	spin_lock_init(&pctl->lock);
-+
-+	pctl->led = led;
-+	pctl->mode = mode;
-+	pctl->ctrl = ctrl;
-+	pctl->basemode = basemode;
-+
-+	pctl->desc.name = dev_name(&pdev->dev);
-+	pctl->desc.owner = THIS_MODULE;
-+	pctl->desc.pctlops = &bcm6362_pctl_ops;
-+	pctl->desc.pmxops = &bcm6362_pmx_ops;
-+
-+	pctl->desc.npins = ARRAY_SIZE(bcm6362_pins);
-+	pctl->desc.pins = bcm6362_pins;
-+
-+	platform_set_drvdata(pdev, pctl);
-+
-+	pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+						 pctl->gpio, BCM6362_NGPIO);
-+	if (IS_ERR(pctl->pctldev))
-+		return PTR_ERR(pctl->pctldev);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id bcm6362_pinctrl_match[] = {
-+	{ .compatible = "brcm,bcm6362-pinctrl", },
-+	{ },
-+};
-+
-+static struct platform_driver bcm6362_pinctrl_driver = {
-+	.probe = bcm6362_pinctrl_probe,
-+	.driver = {
-+		.name = "bcm6362-pinctrl",
-+		.of_match_table = bcm6362_pinctrl_match,
-+	},
-+};
-+
-+builtin_platform_driver(bcm6362_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-5.4/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-5.4/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch
deleted file mode 100644
index e0a698fc12..0000000000
--- a/target/linux/bcm63xx/patches-5.4/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 30594cf9bfff176a9e4b14c50dcd8b9d0cc3edec Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:36:51 +0200
-Subject: [PATCH 10/16] Documentation: add BCM6368 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6368 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6368-pinctrl.txt      | 67 ++++++++++++++++++++++
- 1 file changed, 67 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt
-@@ -0,0 +1,67 @@
-+* Broadcom BCM6368 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6368-pinctrl".
-+- reg: Register specifiers of dirout, dat, mode registers.
-+- reg-names: Must be "dirout", "dat", "mode".
-+- brcm,gpiobasemode: Phandle to the gpio basemode register.
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+	compatible = "brcm,bcm6368-pinctrl";
-+	reg = <0x10000080 0x08>,
-+	      <0x10000088 0x08>,
-+	      <0x10000098 0x04>;
-+	reg-names = "dirout", "dat", "mode";
-+	brcm,gpiobasemode = <&gpiobasemode>;
-+
-+	gpio-controller;
-+	#gpio-cells = <2>;
-+};
-+
-+gpiobasemode: syscon@100000b8 {
-+	compatible = "brcm,bcm6368-gpiobasemode", "syscon";
-+	reg = <0x100000b8 4>;
-+	native-endian;
-+};
-+
-+Available pins/groups and functions:
-+
-+name		pins	functions
-+-----------------------------------------------------------
-+gpio0		0	analog_afe0
-+gpio1		1	analog_afe1
-+gpio2		2	sys_irq
-+gpio3		3	serial_led_data
-+gpio4		4	serial_led_clk
-+gpio5		5	inet_led
-+gpio6		6	ephy0_led
-+gpio7		7	ephy1_led
-+gpio8		8	ephy2_led
-+gpio9		9	ephy3_led
-+gpio10		10	robosw_led_data
-+gpio11		11	robosw_led_clk
-+gpio12		12	robosw_led0
-+gpio13		13	robosw_led1
-+gpio14		14	usb_device_led
-+gpio15		15	-
-+gpio16		16	pci_req1
-+gpio17		17	pci_gnt1
-+gpio18		18	pci_intb
-+gpio19		19	pci_req0
-+gpio20		20	pci_gnt0
-+gpio21		21	-
-+gpio22		22	pcmcia_cd1
-+gpio23		23	pcmcia_cd2
-+gpio24		24	pcmcia_vs1
-+gpio25		25	pcmcia_vs2
-+gpio26		26	ebi_cs2
-+gpio27		27	ebi_cs3
-+gpio28		28	spi_cs2
-+gpio29		29	spi_cs3
-+gpio30		30	spi_cs4
-+gpio31		31	spi_cs5
-+uart1_grp	30-33	uart1
diff --git a/target/linux/bcm63xx/patches-5.4/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch b/target/linux/bcm63xx/patches-5.4/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch
deleted file mode 100644
index 6a9b9e0807..0000000000
--- a/target/linux/bcm63xx/patches-5.4/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch
+++ /dev/null
@@ -1,620 +0,0 @@
-From 90be3cb4f1a45b8be4a4ec264cd66c2f8e893fcb Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:18:25 +0200
-Subject: [PATCH 11/16] pinctrl: add a pincontrol driver for BCM6368
-
-Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32
-GPIOs onto alternative functions. Not all are documented.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |  15 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c | 573 ++++++++++++++++++++++++++++++
- 3 files changed, 589 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -30,3 +30,18 @@ config PINCTRL_BCM6362
- 	select PINCONF
- 	select PINCTRL_BCM63XX
- 	select GENERIC_PINCONF
-+
-+config PINCTRL_BCM6368
-+	bool "BCM6368 pincontrol driver" if COMPILE_TEST
-+	select PINMUX
-+	select PINCONF
-+	select PINCTRL_BCM63XX
-+	select GENERIC_PINCONF
-+	select MFD_SYSCON
-+
-+config PINCTRL_BCM63268
-+	bool "BCM63268 pincontrol driver" if COMPILE_TEST
-+	select PINMUX
-+	select PINCONF
-+	select PINCTRL_BCM63XX
-+	select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -3,3 +3,4 @@ obj-$(CONFIG_PINCTRL_BCM6328)	+= pinctrl
- obj-$(CONFIG_PINCTRL_BCM6348)	+= pinctrl-bcm6348.o
- obj-$(CONFIG_PINCTRL_BCM6358)	+= pinctrl-bcm6358.o
- obj-$(CONFIG_PINCTRL_BCM6362)	+= pinctrl-bcm6362.o
-+obj-$(CONFIG_PINCTRL_BCM6368)	+= pinctrl-bcm6368.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c
-@@ -0,0 +1,573 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/kernel.h>
-+#include <linux/gpio.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_gpio.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6368_NGPIO	38
-+
-+#define BCM6368_BASEMODE_MASK	0x7
-+#define BCM6368_BASEMODE_GPIO	0x0
-+#define BCM6368_BASEMODE_UART1	0x1
-+
-+struct bcm6368_pingroup {
-+	const char *name;
-+	const unsigned * const pins;
-+	const unsigned num_pins;
-+};
-+
-+struct bcm6368_function {
-+	const char *name;
-+	const char * const *groups;
-+	const unsigned num_groups;
-+
-+	unsigned dir_out:16;
-+	unsigned basemode:3;
-+};
-+
-+struct bcm6368_pinctrl {
-+	struct pinctrl_dev *pctldev;
-+	struct pinctrl_desc desc;
-+
-+	void __iomem *mode;
-+	struct regmap_field *overlay;
-+
-+	/* register access lock */
-+	spinlock_t lock;
-+
-+	struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6368_BASEMODE_PIN(a, b)		\
-+	{					\
-+		.number = a,			\
-+		.name = b,			\
-+		.drv_data = (void *)true	\
-+	}
-+
-+static const struct pinctrl_pin_desc bcm6368_pins[] = {
-+	PINCTRL_PIN(0, "gpio0"),
-+	PINCTRL_PIN(1, "gpio1"),
-+	PINCTRL_PIN(2, "gpio2"),
-+	PINCTRL_PIN(3, "gpio3"),
-+	PINCTRL_PIN(4, "gpio4"),
-+	PINCTRL_PIN(5, "gpio5"),
-+	PINCTRL_PIN(6, "gpio6"),
-+	PINCTRL_PIN(7, "gpio7"),
-+	PINCTRL_PIN(8, "gpio8"),
-+	PINCTRL_PIN(9, "gpio9"),
-+	PINCTRL_PIN(10, "gpio10"),
-+	PINCTRL_PIN(11, "gpio11"),
-+	PINCTRL_PIN(12, "gpio12"),
-+	PINCTRL_PIN(13, "gpio13"),
-+	PINCTRL_PIN(14, "gpio14"),
-+	PINCTRL_PIN(15, "gpio15"),
-+	PINCTRL_PIN(16, "gpio16"),
-+	PINCTRL_PIN(17, "gpio17"),
-+	PINCTRL_PIN(18, "gpio18"),
-+	PINCTRL_PIN(19, "gpio19"),
-+	PINCTRL_PIN(20, "gpio20"),
-+	PINCTRL_PIN(21, "gpio21"),
-+	PINCTRL_PIN(22, "gpio22"),
-+	PINCTRL_PIN(23, "gpio23"),
-+	PINCTRL_PIN(24, "gpio24"),
-+	PINCTRL_PIN(25, "gpio25"),
-+	PINCTRL_PIN(26, "gpio26"),
-+	PINCTRL_PIN(27, "gpio27"),
-+	PINCTRL_PIN(28, "gpio28"),
-+	PINCTRL_PIN(29, "gpio29"),
-+	BCM6368_BASEMODE_PIN(30, "gpio30"),
-+	BCM6368_BASEMODE_PIN(31, "gpio31"),
-+	BCM6368_BASEMODE_PIN(32, "gpio32"),
-+	BCM6368_BASEMODE_PIN(33, "gpio33"),
-+	PINCTRL_PIN(34, "gpio34"),
-+	PINCTRL_PIN(35, "gpio35"),
-+	PINCTRL_PIN(36, "gpio36"),
-+	PINCTRL_PIN(37, "gpio37"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned uart1_grp_pins[] = { 30, 31, 32, 33 };
-+
-+#define BCM6368_GROUP(n)				\
-+	{						\
-+		.name = #n,				\
-+		.pins = n##_pins,			\
-+		.num_pins = ARRAY_SIZE(n##_pins),	\
-+	}
-+
-+static struct bcm6368_pingroup bcm6368_groups[] = {
-+	BCM6368_GROUP(gpio0),
-+	BCM6368_GROUP(gpio1),
-+	BCM6368_GROUP(gpio2),
-+	BCM6368_GROUP(gpio3),
-+	BCM6368_GROUP(gpio4),
-+	BCM6368_GROUP(gpio5),
-+	BCM6368_GROUP(gpio6),
-+	BCM6368_GROUP(gpio7),
-+	BCM6368_GROUP(gpio8),
-+	BCM6368_GROUP(gpio9),
-+	BCM6368_GROUP(gpio10),
-+	BCM6368_GROUP(gpio11),
-+	BCM6368_GROUP(gpio12),
-+	BCM6368_GROUP(gpio13),
-+	BCM6368_GROUP(gpio14),
-+	BCM6368_GROUP(gpio15),
-+	BCM6368_GROUP(gpio16),
-+	BCM6368_GROUP(gpio17),
-+	BCM6368_GROUP(gpio18),
-+	BCM6368_GROUP(gpio19),
-+	BCM6368_GROUP(gpio20),
-+	BCM6368_GROUP(gpio21),
-+	BCM6368_GROUP(gpio22),
-+	BCM6368_GROUP(gpio23),
-+	BCM6368_GROUP(gpio24),
-+	BCM6368_GROUP(gpio25),
-+	BCM6368_GROUP(gpio26),
-+	BCM6368_GROUP(gpio27),
-+	BCM6368_GROUP(gpio28),
-+	BCM6368_GROUP(gpio29),
-+	BCM6368_GROUP(gpio30),
-+	BCM6368_GROUP(gpio31),
-+	BCM6368_GROUP(uart1_grp),
-+};
-+
-+static const char * const analog_afe_0_groups[] = {
-+	"gpio0",
-+};
-+
-+static const char * const analog_afe_1_groups[] = {
-+	"gpio1",
-+};
-+
-+static const char * const sys_irq_groups[] = {
-+	"gpio2",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+	"gpio3",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+	"gpio4",
-+};
-+
-+static const char * const inet_led_groups[] = {
-+	"gpio5",
-+};
-+
-+static const char * const ephy0_led_groups[] = {
-+	"gpio6",
-+};
-+
-+static const char * const ephy1_led_groups[] = {
-+	"gpio7",
-+};
-+
-+static const char * const ephy2_led_groups[] = {
-+	"gpio8",
-+};
-+
-+static const char * const ephy3_led_groups[] = {
-+	"gpio9",
-+};
-+
-+static const char * const robosw_led_data_groups[] = {
-+	"gpio10",
-+};
-+
-+static const char * const robosw_led_clk_groups[] = {
-+	"gpio11",
-+};
-+
-+static const char * const robosw_led0_groups[] = {
-+	"gpio12",
-+};
-+
-+static const char * const robosw_led1_groups[] = {
-+	"gpio13",
-+};
-+
-+static const char * const usb_device_led_groups[] = {
-+	"gpio14",
-+};
-+
-+static const char * const pci_req1_groups[] = {
-+	"gpio16",
-+};
-+
-+static const char * const pci_gnt1_groups[] = {
-+	"gpio17",
-+};
-+
-+static const char * const pci_intb_groups[] = {
-+	"gpio18",
-+};
-+
-+static const char * const pci_req0_groups[] = {
-+	"gpio19",
-+};
-+
-+static const char * const pci_gnt0_groups[] = {
-+	"gpio20",
-+};
-+
-+static const char * const pcmcia_cd1_groups[] = {
-+	"gpio22",
-+};
-+
-+static const char * const pcmcia_cd2_groups[] = {
-+	"gpio23",
-+};
-+
-+static const char * const pcmcia_vs1_groups[] = {
-+	"gpio24",
-+};
-+
-+static const char * const pcmcia_vs2_groups[] = {
-+	"gpio25",
-+};
-+
-+static const char * const ebi_cs2_groups[] = {
-+	"gpio26",
-+};
-+
-+static const char * const ebi_cs3_groups[] = {
-+	"gpio27",
-+};
-+
-+static const char * const spi_cs2_groups[] = {
-+	"gpio28",
-+};
-+
-+static const char * const spi_cs3_groups[] = {
-+	"gpio29",
-+};
-+
-+static const char * const spi_cs4_groups[] = {
-+	"gpio30",
-+};
-+
-+static const char * const spi_cs5_groups[] = {
-+	"gpio31",
-+};
-+
-+static const char * const uart1_groups[] = {
-+	"uart1_grp",
-+};
-+
-+#define BCM6368_FUN(n, out)				\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+		.dir_out = out,				\
-+	}
-+
-+#define BCM6368_BASEMODE_FUN(n, val, out)		\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+		.basemode = BCM6368_BASEMODE_##val,	\
-+		.dir_out = out,				\
-+	}
-+
-+static const struct bcm6368_function bcm6368_funcs[] = {
-+	BCM6368_FUN(analog_afe_0, 1),
-+	BCM6368_FUN(analog_afe_1, 1),
-+	BCM6368_FUN(sys_irq, 1),
-+	BCM6368_FUN(serial_led_data, 1),
-+	BCM6368_FUN(serial_led_clk, 1),
-+	BCM6368_FUN(inet_led, 1),
-+	BCM6368_FUN(ephy0_led, 1),
-+	BCM6368_FUN(ephy1_led, 1),
-+	BCM6368_FUN(ephy2_led, 1),
-+	BCM6368_FUN(ephy3_led, 1),
-+	BCM6368_FUN(robosw_led_data, 1),
-+	BCM6368_FUN(robosw_led_clk, 1),
-+	BCM6368_FUN(robosw_led0, 1),
-+	BCM6368_FUN(robosw_led1, 1),
-+	BCM6368_FUN(usb_device_led, 1),
-+	BCM6368_FUN(pci_req1, 0),
-+	BCM6368_FUN(pci_gnt1, 0),
-+	BCM6368_FUN(pci_intb, 0),
-+	BCM6368_FUN(pci_req0, 0),
-+	BCM6368_FUN(pci_gnt0, 0),
-+	BCM6368_FUN(pcmcia_cd1, 0),
-+	BCM6368_FUN(pcmcia_cd2, 0),
-+	BCM6368_FUN(pcmcia_vs1, 0),
-+	BCM6368_FUN(pcmcia_vs2, 0),
-+	BCM6368_FUN(ebi_cs2, 1),
-+	BCM6368_FUN(ebi_cs3, 1),
-+	BCM6368_FUN(spi_cs2, 1),
-+	BCM6368_FUN(spi_cs3, 1),
-+	BCM6368_FUN(spi_cs4, 1),
-+	BCM6368_FUN(spi_cs5, 1),
-+	BCM6368_BASEMODE_FUN(uart1, UART1, 0x6),
-+};
-+
-+static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+	return ARRAY_SIZE(bcm6368_groups);
-+}
-+
-+static const char *bcm6368_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+						  unsigned group)
-+{
-+	return bcm6368_groups[group].name;
-+}
-+
-+static int bcm6368_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+					  unsigned group, const unsigned **pins,
-+					  unsigned *num_pins)
-+{
-+	*pins = bcm6368_groups[group].pins;
-+	*num_pins = bcm6368_groups[group].num_pins;
-+
-+	return 0;
-+}
-+
-+static int bcm6368_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+	return ARRAY_SIZE(bcm6368_funcs);
-+}
-+
-+static const char *bcm6368_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+						 unsigned selector)
-+{
-+	return bcm6368_funcs[selector].name;
-+}
-+
-+static int bcm6368_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+				      unsigned selector,
-+				      const char * const **groups,
-+				      unsigned * const num_groups)
-+{
-+	*groups = bcm6368_funcs[selector].groups;
-+	*num_groups = bcm6368_funcs[selector].num_groups;
-+
-+	return 0;
-+}
-+
-+static void bcm6368_rmw_mux(struct bcm6368_pinctrl *pctl, void __iomem *reg,
-+			    u32 mask, u32 val)
-+{
-+	u32 tmp;
-+
-+	tmp = __raw_readl(reg);
-+	tmp &= ~mask;
-+	tmp |= (val & mask);
-+	__raw_writel(tmp, reg);
-+}
-+
-+static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+				   unsigned selector, unsigned group)
-+{
-+	struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+	const struct bcm6368_pingroup *grp = &bcm6368_groups[group];
-+	const struct bcm6368_function *fun = &bcm6368_funcs[selector];
-+	unsigned long flags;
-+	int i, pin;
-+
-+	spin_lock_irqsave(&pctl->lock, flags);
-+	if (fun->basemode) {
-+		u32 mask = 0;
-+
-+		for (i = 0; i < grp->num_pins; i++) {
-+			pin = grp->pins[i];
-+			if (pin < 32)
-+				mask |= BIT(pin);
-+		}
-+
-+		bcm6368_rmw_mux(pctl, pctl->mode, mask, 0);
-+		regmap_field_write(pctl->overlay, fun->basemode);
-+	} else {
-+		pin = grp->pins[0];
-+
-+		if (bcm6368_pins[pin].drv_data)
-+			regmap_field_write(pctl->overlay,
-+					   BCM6368_BASEMODE_GPIO);
-+
-+		bcm6368_rmw_mux(pctl, pctl->mode, BIT(pin), BIT(pin));
-+	}
-+	spin_unlock_irqrestore(&pctl->lock, flags);
-+
-+	for (pin = 0; pin < grp->num_pins; pin++) {
-+		int hw_gpio = bcm6368_pins[pin].number;
-+		struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32];
-+
-+		if (fun->dir_out & BIT(pin))
-+			gc->direction_output(gc, hw_gpio % 32, 0);
-+		else
-+			gc->direction_input(gc, hw_gpio % 32);
-+	}
-+
-+	return 0;
-+}
-+
-+static int bcm6368_gpio_request_enable(struct pinctrl_dev *pctldev,
-+				       struct pinctrl_gpio_range *range,
-+				       unsigned offset)
-+{
-+	struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+	unsigned long flags;
-+
-+	if (offset >= 32 && !bcm6368_pins[offset].drv_data)
-+		return 0;
-+
-+	spin_lock_irqsave(&pctl->lock, flags);
-+	/* disable all functions using this pin */
-+	if (offset < 32)
-+		bcm6368_rmw_mux(pctl, pctl->mode, BIT(offset), 0);
-+
-+	if (bcm6368_pins[offset].drv_data)
-+		regmap_field_write(pctl->overlay, BCM6368_BASEMODE_GPIO);
-+
-+	spin_unlock_irqrestore(&pctl->lock, flags);
-+
-+	return 0;
-+}
-+
-+static struct pinctrl_ops bcm6368_pctl_ops = {
-+	.get_groups_count	= bcm6368_pinctrl_get_group_count,
-+	.get_group_name		= bcm6368_pinctrl_get_group_name,
-+	.get_group_pins		= bcm6368_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+	.dt_node_to_map		= pinconf_generic_dt_node_to_map_pin,
-+	.dt_free_map		= pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6368_pmx_ops = {
-+	.get_functions_count	= bcm6368_pinctrl_get_func_count,
-+	.get_function_name	= bcm6368_pinctrl_get_func_name,
-+	.get_function_groups	= bcm6368_pinctrl_get_groups,
-+	.set_mux		= bcm6368_pinctrl_set_mux,
-+	.gpio_request_enable	= bcm6368_gpio_request_enable,
-+	.strict			= true,
-+};
-+
-+static int bcm6368_pinctrl_probe(struct platform_device *pdev)
-+{
-+	struct bcm6368_pinctrl *pctl;
-+	struct resource *res;
-+	void __iomem *mode;
-+	struct regmap *basemode;
-+	struct reg_field overlay = REG_FIELD(0, 0, 3);
-+
-+	if (pdev->dev.of_node)
-+		basemode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+							   "brcm,gpiobasemode");
-+	else
-+		basemode = syscon_regmap_lookup_by_pdevname("syscon.b00000b8");
-+
-+	if (IS_ERR(basemode))
-+		return PTR_ERR(basemode);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+	mode = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(mode))
-+		return PTR_ERR(mode);
-+
-+	pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+	if (!pctl)
-+		return -ENOMEM;
-+
-+	pctl->overlay = devm_regmap_field_alloc(&pdev->dev, basemode, overlay);
-+	if (IS_ERR(pctl->overlay))
-+		return PTR_ERR(pctl->overlay);
-+
-+	spin_lock_init(&pctl->lock);
-+
-+	pctl->mode = mode;
-+
-+	/* disable all muxes by default */
-+	__raw_writel(0, pctl->mode);
-+
-+	pctl->desc.name = dev_name(&pdev->dev);
-+	pctl->desc.owner = THIS_MODULE;
-+	pctl->desc.pctlops = &bcm6368_pctl_ops;
-+	pctl->desc.pmxops = &bcm6368_pmx_ops;
-+
-+	pctl->desc.npins = ARRAY_SIZE(bcm6368_pins);
-+	pctl->desc.pins = bcm6368_pins;
-+
-+	platform_set_drvdata(pdev, pctl);
-+
-+	pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+						 pctl->gpio, BCM6368_NGPIO);
-+	if (IS_ERR(pctl->pctldev))
-+		return PTR_ERR(pctl->pctldev);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id bcm6368_pinctrl_match[] = {
-+	{ .compatible = "brcm,bcm6368-pinctrl", },
-+	{ },
-+};
-+
-+static struct platform_driver bcm6368_pinctrl_driver = {
-+	.probe = bcm6368_pinctrl_probe,
-+	.driver = {
-+		.name = "bcm6368-pinctrl",
-+		.of_match_table = bcm6368_pinctrl_match,
-+	},
-+};
-+
-+builtin_platform_driver(bcm6368_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-5.4/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch b/target/linux/bcm63xx/patches-5.4/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch
deleted file mode 100644
index ffe842fd73..0000000000
--- a/target/linux/bcm63xx/patches-5.4/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From 28cc80e4ada5d73d5305fd268297825cd8d01936 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:37:08 +0200
-Subject: [PATCH 12/16] Documentation: add BCM63268 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in the BCM63268
-family SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm63268-pinctrl.txt     | 88 ++++++++++++++++++++++
- 1 file changed, 88 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt
-@@ -0,0 +1,88 @@
-+* Broadcom BCM63268 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6362-pinctrl".
-+- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers.
-+- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@100000c0 {
-+	compatible = "brcm,bcm63268-pinctrl";
-+	reg = <0x100000c0 0x8>,
-+	      <0x100000c8 0x8>,
-+	      <0x100000d0 0x4>,
-+	      <0x100000d8 0x4>,
-+	      <0x100000dc 0x4>,
-+	      <0x100000f8 0x4>;
-+	reg-names = "dirout", "dat", "led", "mode",
-+		    "ctrl", "basemode";
-+
-+	gpio-controller;
-+	#gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name		pins		functions
-+-----------------------------------------------------------
-+gpio0		0		led, serial_led_clk
-+gpio1		1		led, serial_led_data
-+gpio2		2		led,
-+gpio3		3		led,
-+gpio4		4		led,
-+gpio5		5		led,
-+gpio6		6		led,
-+gpio7		7		led,
-+gpio8		8		led, hsspi_cs6
-+gpio9		9		led, hsspi_cs7
-+gpio10		10		led, uart1_scts
-+gpio11		11		led, uart1_srts
-+gpio12		12		led, uart1_sdin
-+gpio13		13		led, uart1_sdout
-+gpio14		14		led, ntr_pulse_in
-+gpio15		15		led, dsl_ntr_pulse_out
-+gpio16		16		led, hsspi_cs4
-+gpio17		17		led, hsspi_cs5
-+gpio18		18		led, adsl_spi_miso
-+gpio19		19		led, adsl_spi_mosi
-+gpio20		20		led,
-+gpio21		21		led,
-+gpio22		22		led, vreg_clk
-+gpio23		23		led, pcie_clkreq_b
-+gpio24		24		uart1_scts
-+gpio25		25		uart1_srts
-+gpio26		26		uart1_sdin
-+gpio27		27		uart1_sdout
-+gpio28		28		ntr_pulse_in
-+gpio29		29		dsl_ntr_pulse_out
-+gpio30		30		switch_led_clk
-+gpio31		31		switch_led_data
-+gpio32		32		wifi
-+gpio33		33		wifi
-+gpio34		34		wifi
-+gpio35		35		wifi
-+gpio36		36		wifi
-+gpio37		37		wifi
-+gpio38		38		wifi
-+gpio39		39		wifi
-+gpio40		40		wifi
-+gpio41		41		wifi
-+gpio42		42		wifi
-+gpio43		43		wifi
-+gpio44		44		wifi
-+gpio45		45		wifi
-+gpio46		46		wifi
-+gpio47		47		wifi
-+gpio48		48		wifi
-+gpio49		49		wifi
-+gpio50		50		wifi
-+gpio51		51		wifi
-+nand_grp	2-7,24-31	nand
-+dect_pd_grp	8-9		dect_pd
-+vdsl_phy0_grp	10-11		vdsl_phy0
-+vdsl_phy1_grp	12-13		vdsl_phy1
-+vdsl_phy2_grp	24-25		vdsl_phy2
-+vdsl_phy3_grp	26-27		vdsl_phy3
diff --git a/target/linux/bcm63xx/patches-5.4/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch b/target/linux/bcm63xx/patches-5.4/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch
deleted file mode 100644
index 089d14e3e4..0000000000
--- a/target/linux/bcm63xx/patches-5.4/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch
+++ /dev/null
@@ -1,736 +0,0 @@
-From 8665d3ea63649cc155286c75f83f694a930580e5 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:19:12 +0200
-Subject: [PATCH 13/16] pinctrl: add a pincontrol driver for BCM63268
-
-Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs
-to different functions. Depending on the mux, these are either single
-pin configurations or whole pin groups.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Makefile           |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c | 710 +++++++++++++++++++++++++++++
- 2 files changed, 711 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c
-
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -4,3 +4,4 @@ obj-$(CONFIG_PINCTRL_BCM6348)	+= pinctrl
- obj-$(CONFIG_PINCTRL_BCM6358)	+= pinctrl-bcm6358.o
- obj-$(CONFIG_PINCTRL_BCM6362)	+= pinctrl-bcm6362.o
- obj-$(CONFIG_PINCTRL_BCM6368)	+= pinctrl-bcm6368.o
-+obj-$(CONFIG_PINCTRL_BCM63268)	+= pinctrl-bcm63268.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c
-@@ -0,0 +1,710 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM63268_NGPIO			52
-+
-+/* GPIO_BASEMODE register */
-+#define BASEMODE_NAND			BIT(2) /* GPIOs 2-7, 24-31 */
-+#define BASEMODE_GPIO35			BIT(4) /* GPIO 35 */
-+#define BASEMODE_DECTPD			BIT(5) /* GPIOs 8/9 */
-+#define BASEMODE_VDSL_PHY_0		BIT(6) /* GPIOs 10/11 */
-+#define BASEMODE_VDSL_PHY_1		BIT(7) /* GPIOs 12/13 */
-+#define BASEMODE_VDSL_PHY_2		BIT(8) /* GPIOs 24/25 */
-+#define BASEMODE_VDSL_PHY_3		BIT(9) /* GPIOs 26/27 */
-+
-+enum bcm63268_pinctrl_reg {
-+	BCM63268_LEDCTRL,
-+	BCM63268_MODE,
-+	BCM63268_CTRL,
-+	BCM63268_BASEMODE,
-+};
-+
-+struct bcm63268_pingroup {
-+	const char *name;
-+	const unsigned * const pins;
-+	const unsigned num_pins;
-+};
-+
-+struct bcm63268_function {
-+	const char *name;
-+	const char * const *groups;
-+	const unsigned num_groups;
-+
-+	enum bcm63268_pinctrl_reg reg;
-+	u32 mask;
-+};
-+
-+struct bcm63268_pinctrl {
-+	struct pinctrl_dev *pctldev;
-+	struct pinctrl_desc desc;
-+
-+	void __iomem *led;
-+	void __iomem *mode;
-+	void __iomem *ctrl;
-+	void __iomem *basemode;
-+
-+	/* register access lock */
-+	spinlock_t lock;
-+
-+	struct gpio_chip gpio[2];
-+};
-+
-+#define BCM63268_PIN(a, b, basemode)			\
-+	{						\
-+		.number = a,				\
-+		.name = b,				\
-+		.drv_data = (void *)(basemode)		\
-+	}
-+
-+static const struct pinctrl_pin_desc bcm63268_pins[] = {
-+	PINCTRL_PIN(0, "gpio0"),
-+	PINCTRL_PIN(1, "gpio1"),
-+	BCM63268_PIN(2, "gpio2", BASEMODE_NAND),
-+	BCM63268_PIN(3, "gpio3", BASEMODE_NAND),
-+	BCM63268_PIN(4, "gpio4", BASEMODE_NAND),
-+	BCM63268_PIN(5, "gpio5", BASEMODE_NAND),
-+	BCM63268_PIN(6, "gpio6", BASEMODE_NAND),
-+	BCM63268_PIN(7, "gpio7", BASEMODE_NAND),
-+	BCM63268_PIN(8, "gpio8", BASEMODE_DECTPD),
-+	BCM63268_PIN(9, "gpio9", BASEMODE_DECTPD),
-+	BCM63268_PIN(10, "gpio10", BASEMODE_VDSL_PHY_0),
-+	BCM63268_PIN(11, "gpio11", BASEMODE_VDSL_PHY_0),
-+	BCM63268_PIN(12, "gpio12", BASEMODE_VDSL_PHY_1),
-+	BCM63268_PIN(13, "gpio13", BASEMODE_VDSL_PHY_1),
-+	PINCTRL_PIN(14, "gpio14"),
-+	PINCTRL_PIN(15, "gpio15"),
-+	PINCTRL_PIN(16, "gpio16"),
-+	PINCTRL_PIN(17, "gpio17"),
-+	PINCTRL_PIN(18, "gpio18"),
-+	PINCTRL_PIN(19, "gpio19"),
-+	PINCTRL_PIN(20, "gpio20"),
-+	PINCTRL_PIN(21, "gpio21"),
-+	PINCTRL_PIN(22, "gpio22"),
-+	PINCTRL_PIN(23, "gpio23"),
-+	BCM63268_PIN(24, "gpio24", BASEMODE_NAND | BASEMODE_VDSL_PHY_2),
-+	BCM63268_PIN(25, "gpio25", BASEMODE_NAND | BASEMODE_VDSL_PHY_2),
-+	BCM63268_PIN(26, "gpio26", BASEMODE_NAND | BASEMODE_VDSL_PHY_3),
-+	BCM63268_PIN(27, "gpio27", BASEMODE_NAND | BASEMODE_VDSL_PHY_3),
-+	BCM63268_PIN(28, "gpio28", BASEMODE_NAND),
-+	BCM63268_PIN(29, "gpio29", BASEMODE_NAND),
-+	BCM63268_PIN(30, "gpio30", BASEMODE_NAND),
-+	BCM63268_PIN(31, "gpio31", BASEMODE_NAND),
-+	PINCTRL_PIN(32, "gpio32"),
-+	PINCTRL_PIN(33, "gpio33"),
-+	PINCTRL_PIN(34, "gpio34"),
-+	PINCTRL_PIN(35, "gpio35"),
-+	PINCTRL_PIN(36, "gpio36"),
-+	PINCTRL_PIN(37, "gpio37"),
-+	PINCTRL_PIN(38, "gpio38"),
-+	PINCTRL_PIN(39, "gpio39"),
-+	PINCTRL_PIN(40, "gpio40"),
-+	PINCTRL_PIN(41, "gpio41"),
-+	PINCTRL_PIN(42, "gpio42"),
-+	PINCTRL_PIN(43, "gpio43"),
-+	PINCTRL_PIN(44, "gpio44"),
-+	PINCTRL_PIN(45, "gpio45"),
-+	PINCTRL_PIN(46, "gpio46"),
-+	PINCTRL_PIN(47, "gpio47"),
-+	PINCTRL_PIN(48, "gpio48"),
-+	PINCTRL_PIN(49, "gpio49"),
-+	PINCTRL_PIN(50, "gpio50"),
-+	PINCTRL_PIN(51, "gpio51"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned gpio32_pins[] = { 32 };
-+static unsigned gpio33_pins[] = { 33 };
-+static unsigned gpio34_pins[] = { 34 };
-+static unsigned gpio35_pins[] = { 35 };
-+static unsigned gpio36_pins[] = { 36 };
-+static unsigned gpio37_pins[] = { 37 };
-+static unsigned gpio38_pins[] = { 38 };
-+static unsigned gpio39_pins[] = { 39 };
-+static unsigned gpio40_pins[] = { 40 };
-+static unsigned gpio41_pins[] = { 41 };
-+static unsigned gpio42_pins[] = { 42 };
-+static unsigned gpio43_pins[] = { 43 };
-+static unsigned gpio44_pins[] = { 44 };
-+static unsigned gpio45_pins[] = { 45 };
-+static unsigned gpio46_pins[] = { 46 };
-+static unsigned gpio47_pins[] = { 47 };
-+static unsigned gpio48_pins[] = { 48 };
-+static unsigned gpio49_pins[] = { 49 };
-+static unsigned gpio50_pins[] = { 50 };
-+static unsigned gpio51_pins[] = { 51 };
-+
-+static unsigned nand_grp_pins[] = {
-+	2, 3, 4, 5, 6, 7, 24,
-+	25, 26, 27, 28, 29, 30, 31,
-+};
-+
-+static unsigned dectpd_grp_pins[] = { 8, 9 };
-+static unsigned vdsl_phy0_grp_pins[] = { 10, 11 };
-+static unsigned vdsl_phy1_grp_pins[] = { 12, 13 };
-+static unsigned vdsl_phy2_grp_pins[] = { 24, 25 };
-+static unsigned vdsl_phy3_grp_pins[] = { 26, 27 };
-+
-+#define BCM63268_GROUP(n)					\
-+	{							\
-+		.name = #n,					\
-+		.pins = n##_pins,				\
-+		.num_pins = ARRAY_SIZE(n##_pins),		\
-+	}
-+
-+static struct bcm63268_pingroup bcm63268_groups[] = {
-+	BCM63268_GROUP(gpio0),
-+	BCM63268_GROUP(gpio1),
-+	BCM63268_GROUP(gpio2),
-+	BCM63268_GROUP(gpio3),
-+	BCM63268_GROUP(gpio4),
-+	BCM63268_GROUP(gpio5),
-+	BCM63268_GROUP(gpio6),
-+	BCM63268_GROUP(gpio7),
-+	BCM63268_GROUP(gpio8),
-+	BCM63268_GROUP(gpio9),
-+	BCM63268_GROUP(gpio10),
-+	BCM63268_GROUP(gpio11),
-+	BCM63268_GROUP(gpio12),
-+	BCM63268_GROUP(gpio13),
-+	BCM63268_GROUP(gpio14),
-+	BCM63268_GROUP(gpio15),
-+	BCM63268_GROUP(gpio16),
-+	BCM63268_GROUP(gpio17),
-+	BCM63268_GROUP(gpio18),
-+	BCM63268_GROUP(gpio19),
-+	BCM63268_GROUP(gpio20),
-+	BCM63268_GROUP(gpio21),
-+	BCM63268_GROUP(gpio22),
-+	BCM63268_GROUP(gpio23),
-+	BCM63268_GROUP(gpio24),
-+	BCM63268_GROUP(gpio25),
-+	BCM63268_GROUP(gpio26),
-+	BCM63268_GROUP(gpio27),
-+	BCM63268_GROUP(gpio28),
-+	BCM63268_GROUP(gpio29),
-+	BCM63268_GROUP(gpio30),
-+	BCM63268_GROUP(gpio31),
-+	BCM63268_GROUP(gpio32),
-+	BCM63268_GROUP(gpio33),
-+	BCM63268_GROUP(gpio34),
-+	BCM63268_GROUP(gpio35),
-+	BCM63268_GROUP(gpio36),
-+	BCM63268_GROUP(gpio37),
-+	BCM63268_GROUP(gpio38),
-+	BCM63268_GROUP(gpio39),
-+	BCM63268_GROUP(gpio40),
-+	BCM63268_GROUP(gpio41),
-+	BCM63268_GROUP(gpio42),
-+	BCM63268_GROUP(gpio43),
-+	BCM63268_GROUP(gpio44),
-+	BCM63268_GROUP(gpio45),
-+	BCM63268_GROUP(gpio46),
-+	BCM63268_GROUP(gpio47),
-+	BCM63268_GROUP(gpio48),
-+	BCM63268_GROUP(gpio49),
-+	BCM63268_GROUP(gpio50),
-+	BCM63268_GROUP(gpio51),
-+
-+	/* multi pin groups */
-+	BCM63268_GROUP(nand_grp),
-+	BCM63268_GROUP(dectpd_grp),
-+	BCM63268_GROUP(vdsl_phy0_grp),
-+	BCM63268_GROUP(vdsl_phy1_grp),
-+	BCM63268_GROUP(vdsl_phy2_grp),
-+	BCM63268_GROUP(vdsl_phy3_grp),
-+};
-+
-+static const char * const led_groups[] = {
-+	"gpio0",
-+	"gpio1",
-+	"gpio2",
-+	"gpio3",
-+	"gpio4",
-+	"gpio5",
-+	"gpio6",
-+	"gpio7",
-+	"gpio8",
-+	"gpio9",
-+	"gpio10",
-+	"gpio11",
-+	"gpio12",
-+	"gpio13",
-+	"gpio14",
-+	"gpio15",
-+	"gpio16",
-+	"gpio17",
-+	"gpio18",
-+	"gpio19",
-+	"gpio20",
-+	"gpio21",
-+	"gpio22",
-+	"gpio23",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+	"gpio0",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+	"gpio1",
-+};
-+
-+static const char * const hsspi_cs4_groups[] = {
-+	"gpio16",
-+};
-+
-+static const char * const hsspi_cs5_groups[] = {
-+	"gpio17",
-+};
-+
-+static const char * const hsspi_cs6_groups[] = {
-+	"gpio8",
-+};
-+
-+static const char * const hsspi_cs7_groups[] = {
-+	"gpio9",
-+};
-+
-+static const char * const uart1_scts_groups[] = {
-+	"gpio10",
-+	"gpio24",
-+};
-+
-+static const char * const uart1_srts_groups[] = {
-+	"gpio11",
-+	"gpio25",
-+};
-+
-+static const char * const uart1_sdin_groups[] = {
-+	"gpio12",
-+	"gpio26",
-+};
-+
-+static const char * const uart1_sdout_groups[] = {
-+	"gpio13",
-+	"gpio27",
-+};
-+
-+static const char * const ntr_pulse_in_groups[] = {
-+	"gpio14",
-+	"gpio28",
-+};
-+
-+static const char * const dsl_ntr_pulse_out_groups[] = {
-+	"gpio15",
-+	"gpio29",
-+};
-+
-+static const char * const adsl_spi_miso_groups[] = {
-+	"gpio18",
-+};
-+
-+static const char * const adsl_spi_mosi_groups[] = {
-+	"gpio19",
-+};
-+
-+static const char * const vreg_clk_groups[] = {
-+	"gpio22",
-+};
-+
-+static const char * const pcie_clkreq_b_groups[] = {
-+	"gpio23",
-+};
-+
-+static const char * const switch_led_clk_groups[] = {
-+	"gpio30",
-+};
-+
-+static const char * const switch_led_data_groups[] = {
-+	"gpio31",
-+};
-+
-+static const char * const wifi_groups[] = {
-+	"gpio32",
-+	"gpio33",
-+	"gpio34",
-+	"gpio35",
-+	"gpio36",
-+	"gpio37",
-+	"gpio38",
-+	"gpio39",
-+	"gpio40",
-+	"gpio41",
-+	"gpio42",
-+	"gpio43",
-+	"gpio44",
-+	"gpio45",
-+	"gpio46",
-+	"gpio47",
-+	"gpio48",
-+	"gpio49",
-+	"gpio50",
-+	"gpio51",
-+};
-+
-+static const char * const nand_groups[] = {
-+	"nand_grp",
-+};
-+
-+static const char * const dectpd_groups[] = {
-+	"dectpd_grp",
-+};
-+
-+static const char * const vdsl_phy_override_0_groups[] = {
-+	"vdsl_phy_override_0_grp",
-+};
-+
-+static const char * const vdsl_phy_override_1_groups[] = {
-+	"vdsl_phy_override_1_grp",
-+};
-+
-+static const char * const vdsl_phy_override_2_groups[] = {
-+	"vdsl_phy_override_2_grp",
-+};
-+
-+static const char * const vdsl_phy_override_3_groups[] = {
-+	"vdsl_phy_override_3_grp",
-+};
-+
-+#define BCM63268_LED_FUN(n)				\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+		.reg = BCM63268_LEDCTRL,		\
-+	}
-+
-+#define BCM63268_MODE_FUN(n)				\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+		.reg = BCM63268_MODE,			\
-+	}
-+
-+#define BCM63268_CTRL_FUN(n)				\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+		.reg = BCM63268_CTRL,			\
-+	}
-+
-+#define BCM63268_BASEMODE_FUN(n, val)			\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+		.reg = BCM63268_BASEMODE,		\
-+		.mask = val,				\
-+	}
-+
-+static const struct bcm63268_function bcm63268_funcs[] = {
-+	BCM63268_LED_FUN(led),
-+	BCM63268_MODE_FUN(serial_led_clk),
-+	BCM63268_MODE_FUN(serial_led_data),
-+	BCM63268_MODE_FUN(hsspi_cs6),
-+	BCM63268_MODE_FUN(hsspi_cs7),
-+	BCM63268_MODE_FUN(uart1_scts),
-+	BCM63268_MODE_FUN(uart1_srts),
-+	BCM63268_MODE_FUN(uart1_sdin),
-+	BCM63268_MODE_FUN(uart1_sdout),
-+	BCM63268_MODE_FUN(ntr_pulse_in),
-+	BCM63268_MODE_FUN(dsl_ntr_pulse_out),
-+	BCM63268_MODE_FUN(hsspi_cs4),
-+	BCM63268_MODE_FUN(hsspi_cs5),
-+	BCM63268_MODE_FUN(adsl_spi_miso),
-+	BCM63268_MODE_FUN(adsl_spi_mosi),
-+	BCM63268_MODE_FUN(vreg_clk),
-+	BCM63268_MODE_FUN(pcie_clkreq_b),
-+	BCM63268_MODE_FUN(switch_led_clk),
-+	BCM63268_MODE_FUN(switch_led_data),
-+	BCM63268_CTRL_FUN(wifi),
-+	BCM63268_BASEMODE_FUN(nand, BASEMODE_NAND),
-+	BCM63268_BASEMODE_FUN(dectpd, BASEMODE_DECTPD),
-+	BCM63268_BASEMODE_FUN(vdsl_phy_override_0, BASEMODE_VDSL_PHY_0),
-+	BCM63268_BASEMODE_FUN(vdsl_phy_override_1, BASEMODE_VDSL_PHY_1),
-+	BCM63268_BASEMODE_FUN(vdsl_phy_override_2, BASEMODE_VDSL_PHY_2),
-+	BCM63268_BASEMODE_FUN(vdsl_phy_override_3, BASEMODE_VDSL_PHY_3),
-+};
-+
-+static int bcm63268_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+	return ARRAY_SIZE(bcm63268_groups);
-+}
-+
-+static const char *bcm63268_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+						   unsigned group)
-+{
-+	return bcm63268_groups[group].name;
-+}
-+
-+static int bcm63268_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+					   unsigned group,
-+					   const unsigned **pins,
-+					   unsigned *num_pins)
-+{
-+	*pins = bcm63268_groups[group].pins;
-+	*num_pins = bcm63268_groups[group].num_pins;
-+
-+	return 0;
-+}
-+
-+static int bcm63268_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+	return ARRAY_SIZE(bcm63268_funcs);
-+}
-+
-+static const char *bcm63268_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+						  unsigned selector)
-+{
-+	return bcm63268_funcs[selector].name;
-+}
-+
-+static int bcm63268_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+				       unsigned selector,
-+				       const char * const **groups,
-+				       unsigned * const num_groups)
-+{
-+	*groups = bcm63268_funcs[selector].groups;
-+	*num_groups = bcm63268_funcs[selector].num_groups;
-+
-+	return 0;
-+}
-+
-+static void bcm63268_rmw_mux(struct bcm63268_pinctrl *pctl, void __iomem *reg,
-+			     u32 mask, u32 val)
-+{
-+	unsigned long flags;
-+	u32 tmp;
-+
-+	spin_lock_irqsave(&pctl->lock, flags);
-+	tmp = __raw_readl(reg);
-+	tmp &= ~mask;
-+	tmp |= val;
-+	__raw_writel(tmp, reg);
-+
-+	spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static void bcm63268_set_gpio(struct bcm63268_pinctrl *pctl, unsigned pin)
-+{
-+	const struct pinctrl_pin_desc *desc = &bcm63268_pins[pin];
-+	u32 basemode = (unsigned long)desc->drv_data;
-+	u32 mask = BIT(pin % 32);
-+
-+	if (basemode)
-+		bcm63268_rmw_mux(pctl, pctl->basemode, basemode, 0);
-+
-+	if (pin < 32) {
-+		/* base mode: 0 => gpio, 1 => mux function */
-+		bcm63268_rmw_mux(pctl, pctl->mode, mask, 0);
-+
-+		/* pins 0-23 might be muxed to led */
-+		if (pin < 24)
-+			bcm63268_rmw_mux(pctl, pctl->led, mask, 0);
-+	} else if (pin < 52) {
-+		/* ctrl reg: 0 => wifi function, 1 => gpio */
-+		bcm63268_rmw_mux(pctl, pctl->ctrl, mask, mask);
-+	}
-+}
-+
-+static int bcm63268_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+				    unsigned selector, unsigned group)
-+{
-+	struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+	const struct bcm63268_pingroup *grp = &bcm63268_groups[group];
-+	const struct bcm63268_function *f = &bcm63268_funcs[selector];
-+	unsigned i;
-+	void __iomem *reg;
-+	u32 val, mask;
-+
-+	for (i = 0; i < grp->num_pins; i++)
-+		bcm63268_set_gpio(pctl, grp->pins[i]);
-+
-+	switch (f->reg) {
-+	case BCM63268_LEDCTRL:
-+		reg = pctl->led;
-+		mask = BIT(grp->pins[0]);
-+		val = BIT(grp->pins[0]);
-+		break;
-+	case BCM63268_MODE:
-+		reg = pctl->mode;
-+		mask = BIT(grp->pins[0]);
-+		val = BIT(grp->pins[0]);
-+		break;
-+	case BCM63268_CTRL:
-+		reg = pctl->ctrl;
-+		mask = BIT(grp->pins[0]);
-+		val = 0;
-+		break;
-+	case BCM63268_BASEMODE:
-+		reg = pctl->basemode;
-+		mask = f->mask;
-+		val = f->mask;
-+		break;
-+	default:
-+		WARN_ON(1);
-+		return -EINVAL;
-+	}
-+
-+	bcm63268_rmw_mux(pctl, reg, mask, val);
-+
-+	return 0;
-+}
-+
-+static int bcm63268_gpio_request_enable(struct pinctrl_dev *pctldev,
-+					struct pinctrl_gpio_range *range,
-+					unsigned offset)
-+{
-+	struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+	/* disable all functions using this pin */
-+	bcm63268_set_gpio(pctl, offset);
-+
-+	return 0;
-+}
-+
-+static struct pinctrl_ops bcm63268_pctl_ops = {
-+	.get_groups_count	= bcm63268_pinctrl_get_group_count,
-+	.get_group_name		= bcm63268_pinctrl_get_group_name,
-+	.get_group_pins		= bcm63268_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+	.dt_node_to_map		= pinconf_generic_dt_node_to_map_pin,
-+	.dt_free_map		= pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm63268_pmx_ops = {
-+	.get_functions_count	= bcm63268_pinctrl_get_func_count,
-+	.get_function_name	= bcm63268_pinctrl_get_func_name,
-+	.get_function_groups	= bcm63268_pinctrl_get_groups,
-+	.set_mux		= bcm63268_pinctrl_set_mux,
-+	.gpio_request_enable	= bcm63268_gpio_request_enable,
-+	.strict			= true,
-+};
-+
-+static int bcm63268_pinctrl_probe(struct platform_device *pdev)
-+{
-+	struct bcm63268_pinctrl *pctl;
-+	struct resource *res;
-+	void __iomem *led, *mode, *ctrl, *basemode;
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led");
-+	led = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(led))
-+		return PTR_ERR(led);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+	mode = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(mode))
-+		return PTR_ERR(mode);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
-+	ctrl = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(ctrl))
-+		return PTR_ERR(ctrl);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode");
-+	basemode = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(basemode))
-+		return PTR_ERR(basemode);
-+
-+	pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+	if (!pctl)
-+		return -ENOMEM;
-+
-+	spin_lock_init(&pctl->lock);
-+
-+	pctl->led = led;
-+	pctl->mode = mode;
-+	pctl->ctrl = ctrl;
-+	pctl->basemode = basemode;
-+
-+	pctl->desc.name = dev_name(&pdev->dev);
-+	pctl->desc.owner = THIS_MODULE;
-+	pctl->desc.pctlops = &bcm63268_pctl_ops;
-+	pctl->desc.pmxops = &bcm63268_pmx_ops;
-+
-+	pctl->desc.npins = ARRAY_SIZE(bcm63268_pins);
-+	pctl->desc.pins = bcm63268_pins;
-+
-+	platform_set_drvdata(pdev, pctl);
-+
-+	pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+						 pctl->gpio, BCM63268_NGPIO);
-+	if (IS_ERR(pctl->pctldev))
-+		return PTR_ERR(pctl->pctldev);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id bcm63268_pinctrl_match[] = {
-+	{ .compatible = "brcm,bcm63268-pinctrl", },
-+	{ },
-+};
-+
-+static struct platform_driver bcm63268_pinctrl_driver = {
-+	.probe = bcm63268_pinctrl_probe,
-+	.driver = {
-+		.name = "bcm63268-pinctrl",
-+		.of_match_table = bcm63268_pinctrl_match,
-+	},
-+};
-+
-+builtin_platform_driver(bcm63268_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-5.4/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch b/target/linux/bcm63xx/patches-5.4/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch
deleted file mode 100644
index ea836b8a80..0000000000
--- a/target/linux/bcm63xx/patches-5.4/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From e058fa1969019c2f6705c53c4130e364a877d4e6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 26 Nov 2017 12:07:31 +0100
-Subject: [PATCH] gpio: fix device tree gpio hogs on dual role gpio/pincontrol
- controllers
-
-For dual role gpio and pincontrol controller, the device registration
-path is often:
-
-  pinctrl_register(...);
-  gpiochip_add_data(...);
-  gpiochip_add_pin_range(...);
-
-If the device tree node has any gpio-hogs, the code will try to apply them
-in the gpiochip_add_data step, but fail as they cannot be requested, as the
-ranges are missing. But we also cannot first add the pinranges, as the
-appropriate data structures are only initialized in gpiochip_add_data.
-
-To fix this, defer gpio-hogs to the time pin ranges get added instead of
-directly at chip request time, if the gpio-chip has a request method.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
-
- drivers/gpio/gpiolib-of.c | 20 +++++++++++++++-----
- drivers/gpio/gpiolib.c    |  5 +++--
- drivers/gpio/gpiolib.h    |  8 ++++++++
- 3 files changed, 26 insertions(+), 7 deletions(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -621,12 +621,15 @@ static struct gpio_desc *of_parse_own_gp
- /**
-  * of_gpiochip_scan_gpios - Scan gpio-controller for gpio definitions
-  * @chip:	gpio chip to act on
-+ * @start:	first gpio to check
-+ * @num:	number of gpios to check
-  *
-- * This is only used by of_gpiochip_add to request/set GPIO initial
-- * configuration.
-+ * This is used by of_gpiochip_add, gpiochip_add_pingroup_range and
-+ * gpiochip_add_pin_range to request/set GPIO initial configuration.
-  * It returns error if it fails otherwise 0 on success.
-  */
--static int of_gpiochip_scan_gpios(struct gpio_chip *chip)
-+int of_gpiochip_scan_gpios(struct gpio_chip *chip, unsigned int start,
-+			   unsigned int num)
- {
- 	struct gpio_desc *desc = NULL;
- 	struct device_node *np;
-@@ -634,7 +637,7 @@ static int of_gpiochip_scan_gpios(struct
- 	unsigned long lflags;
- 	enum gpiod_flags dflags;
- 	unsigned int i;
--	int ret;
-+	int ret, hwgpio;
- 
- 	for_each_available_child_of_node(chip->of_node, np) {
- 		if (!of_property_read_bool(np, "gpio-hog"))
-@@ -646,6 +649,10 @@ static int of_gpiochip_scan_gpios(struct
- 			if (IS_ERR(desc))
- 				break;
- 
-+			hwgpio = gpio_chip_hwgpio(desc);
-+			if (hwgpio < start || hwgpio >= (start + num))
-+				continue;
-+
- 			ret = gpiod_hog(desc, name, lflags, dflags);
- 			if (ret < 0) {
- 				of_node_put(np);
-@@ -904,9 +911,11 @@ int of_gpiochip_add(struct gpio_chip *ch
- 
- 	of_node_get(chip->of_node);
- 
--	ret = of_gpiochip_scan_gpios(chip);
--	if (ret)
--		of_node_put(chip->of_node);
-+	if (!chip->request) {
-+		ret = of_gpiochip_scan_gpios(chip, 0, chip->ngpio);
-+		if (ret)
-+			of_node_put(chip->of_node);
-+	}
- 
- 	return ret;
- }
---- a/drivers/gpio/gpiolib.c
-+++ b/drivers/gpio/gpiolib.c
-@@ -2580,7 +2580,8 @@ int gpiochip_add_pingroup_range(struct g
- 
- 	list_add_tail(&pin_range->node, &gdev->pin_ranges);
- 
--	return 0;
-+	return of_gpiochip_scan_gpios(chip, gpio_offset,
-+				      pin_range->range.npins);
- }
- EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range);
- 
-@@ -2637,7 +2638,7 @@ int gpiochip_add_pin_range(struct gpio_c
- 
- 	list_add_tail(&pin_range->node, &gdev->pin_ranges);
- 
--	return 0;
-+	return of_gpiochip_scan_gpios(chip, gpio_offset, npins);
- }
- EXPORT_SYMBOL_GPL(gpiochip_add_pin_range);
- 
---- a/drivers/gpio/gpiolib-of.h
-+++ b/drivers/gpio/gpiolib-of.h
-@@ -13,6 +13,8 @@ struct gpio_desc *of_find_gpio(struct de
- 			       unsigned long *lookupflags);
- int of_gpiochip_add(struct gpio_chip *gc);
- void of_gpiochip_remove(struct gpio_chip *gc);
-+int of_gpiochip_scan_gpios(struct gpio_chip *chip, unsigned int start,
-+			   unsigned int num);
- int of_gpio_get_count(struct device *dev, const char *con_id);
- bool of_gpio_need_valid_mask(const struct gpio_chip *gc);
- #else
-@@ -25,6 +27,12 @@ static inline struct gpio_desc *of_find_
- }
- static inline int of_gpiochip_add(struct gpio_chip *gc) { return 0; }
- static inline void of_gpiochip_remove(struct gpio_chip *gc) { }
-+static inline int of_gpiochip_scan_gpios(struct gpio_chip *chip,
-+					 unsigned int start,
-+					 unsigned int num)
-+{
-+	return 0;
-+}
- static inline int of_gpio_get_count(struct device *dev, const char *con_id)
- {
- 	return 0;
diff --git a/target/linux/bcm63xx/patches-5.4/144-add-removed-syscon_regmap_lookup_by_pdevname.patch b/target/linux/bcm63xx/patches-5.4/144-add-removed-syscon_regmap_lookup_by_pdevname.patch
deleted file mode 100644
index 490558362b..0000000000
--- a/target/linux/bcm63xx/patches-5.4/144-add-removed-syscon_regmap_lookup_by_pdevname.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
-Date: Fri, 03 Apr 2020 19:50:03 +0200
-Subject: add removed helper syscon_regmap_lookup_by_pdevname
-
-The helper syscon_regmap_lookup_by_pdevname has been removed in 29d14b668d2f
-("mfd: Remove unused helper syscon_regmap_lookup_by_pdevname") due to lack
-of users.
-
-Thus, we have to maintain it locally.
-
-This patch includes a fix due to changes in driver_find_device;
-kernel commit: 92ce7e83b4e5 ("driver_find_device: Unify the match function
-with class_find_device()")
-
-Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
-
---- a/drivers/mfd/syscon.c
-+++ b/drivers/mfd/syscon.c
-@@ -204,6 +204,27 @@ struct regmap *syscon_regmap_lookup_by_c
- }
- EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_compatible);
- 
-+static int syscon_match_pdevname(struct device *dev, const void *data)
-+{
-+	return !strcmp(dev_name(dev), (const char *)data);
-+}
-+
-+struct regmap *syscon_regmap_lookup_by_pdevname(const char *s)
-+{
-+	struct device *dev;
-+	struct syscon *syscon;
-+
-+	dev = driver_find_device(&syscon_driver.driver, NULL, (void *)s,
-+				 syscon_match_pdevname);
-+	if (!dev)
-+		return ERR_PTR(-EPROBE_DEFER);
-+
-+	syscon = dev_get_drvdata(dev);
-+
-+	return syscon->regmap;
-+}
-+EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_pdevname);
-+
- struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np,
- 					const char *property)
- {
---- a/include/linux/mfd/syscon.h
-+++ b/include/linux/mfd/syscon.h
-@@ -20,6 +20,7 @@ struct device_node;
- extern struct regmap *device_node_to_regmap(struct device_node *np);
- extern struct regmap *syscon_node_to_regmap(struct device_node *np);
- extern struct regmap *syscon_regmap_lookup_by_compatible(const char *s);
-+extern struct regmap *syscon_regmap_lookup_by_pdevname(const char *s);
- extern struct regmap *syscon_regmap_lookup_by_phandle(
- 					struct device_node *np,
- 					const char *property);
-@@ -38,6 +39,11 @@ static inline struct regmap *syscon_regm
- {
- 	return ERR_PTR(-ENOTSUPP);
- }
-+
-+static inline struct regmap *syscon_regmap_lookup_by_pdevname(const char *s)
-+{
-+	return ERR_PTR(-ENOTSUPP);
-+}
- 
- static inline struct regmap *syscon_regmap_lookup_by_phandle(
- 					struct device_node *np,
diff --git a/target/linux/bcm63xx/patches-5.4/145-pinctrl-BCM6362-fix-gpio-mode.patch b/target/linux/bcm63xx/patches-5.4/145-pinctrl-BCM6362-fix-gpio-mode.patch
deleted file mode 100644
index 0189b0b9a3..0000000000
--- a/target/linux/bcm63xx/patches-5.4/145-pinctrl-BCM6362-fix-gpio-mode.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c
-@@ -566,7 +566,7 @@ static int bcm6362_pinctrl_set_mux(struc
- 		val = BIT(grp->pins[0]);
- 		break;
- 	case BCM6362_MODE:
--		reg = pctl->ctrl;
-+		reg = pctl->mode;
- 		mask = BIT(grp->pins[0]);
- 		val = BIT(grp->pins[0]);
- 		break;
diff --git a/target/linux/bcm63xx/patches-5.4/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch b/target/linux/bcm63xx/patches-5.4/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
deleted file mode 100644
index 59e832ea85..0000000000
--- a/target/linux/bcm63xx/patches-5.4/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 6ac09efa8f0e189ffe7dd7b0889289de56ee44cc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 19 Jan 2014 12:18:03 +0100
-Subject: [PATCH] USB: EHCI: allow limiting ports for ehci-platform
-
-In the same way as the ohci platform driver allows limiting ports,
-enable the same for ehci. This prevents a mismatch in the available
-ports between ehci/ohci on USB 2.0 controllers.
-
-This is needed if the USB host controller always reports the maximum
-number of ports regardless of the number of available ports (because
-one might be set to be usb device).
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/usb/host/ehci-hcd.c      | 4 ++++
- drivers/usb/host/ehci-platform.c | 2 ++
- drivers/usb/host/ehci.h          | 1 +
- include/linux/usb/ehci_pdriver.h | 1 +
- 4 files changed, 8 insertions(+)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -687,6 +687,10 @@ int ehci_setup(struct usb_hcd *hcd)
- 
- 	/* cache this readonly data; minimize chip reads */
- 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+	if (ehci->num_ports) {
-+		ehci->hcs_params &= ~0xf; /* bits 3:0, ports on HC */
-+		ehci->hcs_params |= ehci->num_ports;
-+	}
- 
- 	ehci->sbrn = HCD_USB2;
- 
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -62,6 +62,9 @@ static int ehci_platform_reset(struct us
- 
- 	ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
- 
-+	if (pdata->num_ports && pdata->num_ports <= 15)
-+		ehci->num_ports = pdata->num_ports;
-+
- 	if (pdata->pre_setup) {
- 		retval = pdata->pre_setup(hcd);
- 		if (retval < 0)
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -203,6 +203,7 @@ struct ehci_hcd {			/* one per controlle
- 	u32			command;
- 
- 	/* SILICON QUIRKS */
-+	unsigned int		num_ports;
- 	unsigned		no_selective_suspend:1;
- 	unsigned		has_fsl_port_bug:1; /* FreeScale */
- 	unsigned		has_fsl_hs_errata:1;	/* Freescale HS quirk */
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -43,6 +43,7 @@ struct usb_hcd;
-  */
- struct usb_ehci_pdata {
- 	int		caps_offset;
-+	unsigned int	num_ports;
- 	unsigned	has_tt:1;
- 	unsigned	has_synopsys_hc_bug:1;
- 	unsigned	big_endian_desc:1;
diff --git a/target/linux/bcm63xx/patches-5.4/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch b/target/linux/bcm63xx/patches-5.4/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch
deleted file mode 100644
index a53274a4ba..0000000000
--- a/target/linux/bcm63xx/patches-5.4/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch
+++ /dev/null
@@ -1,485 +0,0 @@
-From 5a50cb0d53344a2429831b00925d6183d4d332e1 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 03:54:05 +0100
-Subject: [PATCH 40/44] MIPS: BCM63XX: move device registration code into its
- own file
-
-Move device registration code into its own file to allow sharing it
-between board implementations.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Makefile         |   1 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 188 +-------------------------
- arch/mips/bcm63xx/boards/board_common.c   | 215 ++++++++++++++++++++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |   8 ++
- 4 files changed, 223 insertions(+), 183 deletions(-)
- create mode 100644 arch/mips/bcm63xx/boards/board_common.c
- create mode 100644 arch/mips/bcm63xx/boards/board_common.h
-
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1,2 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0-only
-+obj-y					+= board_common.o
- obj-$(CONFIG_BOARD_BCM963XX)		+= board_bcm963xx.o
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -12,33 +12,21 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
--#include <linux/platform_device.h>
--#include <linux/ssb/ssb.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_nvram.h>
--#include <bcm63xx_dev_pci.h>
--#include <bcm63xx_dev_enet.h>
--#include <bcm63xx_dev_flash.h>
--#include <bcm63xx_dev_hsspi.h>
--#include <bcm63xx_dev_pcmcia.h>
--#include <bcm63xx_dev_spi.h>
--#include <bcm63xx_dev_usb_ehci.h>
--#include <bcm63xx_dev_usb_ohci.h>
--#include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
- 
-+#include "board_common.h"
-+
- #include <uapi/linux/bcm933xx_hcs.h>
- 
- 
- #define HCS_OFFSET_128K			0x20000
- 
--static struct board_info board;
--
- /*
-  * known 3368 boards
-  */
-@@ -692,52 +680,6 @@ static const struct board_info __initcon
- };
- 
- /*
-- * Register a sane SPROMv2 to make the on-board
-- * bcm4318 WLAN work
-- */
--#ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
--	.revision		= 0x02,
--	.board_rev		= 0x17,
--	.country_code		= 0x0,
--	.ant_available_bg	= 0x3,
--	.pa0b0			= 0x15ae,
--	.pa0b1			= 0xfa85,
--	.pa0b2			= 0xfe8d,
--	.pa1b0			= 0xffff,
--	.pa1b1			= 0xffff,
--	.pa1b2			= 0xffff,
--	.gpio0			= 0xff,
--	.gpio1			= 0xff,
--	.gpio2			= 0xff,
--	.gpio3			= 0xff,
--	.maxpwr_bg		= 0x004c,
--	.itssi_bg		= 0x00,
--	.boardflags_lo		= 0x2848,
--	.boardflags_hi		= 0x0000,
--};
--
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
--{
--	if (bus->bustype == SSB_BUSTYPE_PCI) {
--		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
--		return 0;
--	} else {
--		pr_err("unable to fill SPROM for given bustype\n");
--		return -EINVAL;
--	}
--}
--#endif /* CONFIG_SSB_PCIHOST */
--
--/*
-- * return board name for /proc/cpuinfo
-- */
--const char *board_get_name(void)
--{
--	return board.name;
--}
--
--/*
-  * early init callback, read nvram data from flash and checksum it
-  */
- void __init board_prom_init(void)
-@@ -796,137 +738,15 @@ void __init board_prom_init(void)
- 		if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
- 			continue;
- 		/* copy, board desc array is marked initdata */
--		memcpy(&board, bcm963xx_boards[i], sizeof(board));
-+		board_early_setup(bcm963xx_boards[i]);
- 		break;
- 	}
- 
--	/* bail out if board is not found, will complain later */
--	if (!board.name[0]) {
-+	/* warn if board is not found, will complain later */
-+	if (i == ARRAY_SIZE(bcm963xx_boards)) {
- 		char name[17];
- 		memcpy(name, board_name, 16);
- 		name[16] = 0;
- 		pr_err("unknown bcm963xx board: %s\n", name);
--		return;
--	}
--
--	/* setup pin multiplexing depending on board enabled device,
--	 * this has to be done this early since PCI init is done
--	 * inside arch_initcall */
--	val = 0;
--
--#ifdef CONFIG_PCI
--	if (board.has_pci) {
--		bcm63xx_pci_enabled = 1;
--		if (BCMCPU_IS_6348())
--			val |= GPIO_MODE_6348_G2_PCI;
--	}
--#endif /* CONFIG_PCI */
--
--	if (board.has_pccard) {
--		if (BCMCPU_IS_6348())
--			val |= GPIO_MODE_6348_G1_MII_PCCARD;
--	}
--
--	if (board.has_enet0 && !board.enet0.use_internal_phy) {
--		if (BCMCPU_IS_6348())
--			val |= GPIO_MODE_6348_G3_EXT_MII |
--				GPIO_MODE_6348_G0_EXT_MII;
--	}
--
--	if (board.has_enet1 && !board.enet1.use_internal_phy) {
--		if (BCMCPU_IS_6348())
--			val |= GPIO_MODE_6348_G3_EXT_MII |
--				GPIO_MODE_6348_G0_EXT_MII;
--	}
--
--	bcm_gpio_writel(val, GPIO_MODE_REG);
--}
--
--/*
-- * second stage init callback, good time to panic if we couldn't
-- * identify on which board we're running since early printk is working
-- */
--void __init board_setup(void)
--{
--	if (!board.name[0])
--		panic("unable to detect bcm963xx board");
--	pr_info("board name: %s\n", board.name);
--
--	/* make sure we're running on expected cpu */
--	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
--		panic("unexpected CPU for bcm963xx board");
--}
--
--static struct gpio_led_platform_data bcm63xx_led_data;
--
--static struct platform_device bcm63xx_gpio_leds = {
--	.name			= "leds-gpio",
--	.id			= 0,
--	.dev.platform_data	= &bcm63xx_led_data,
--};
--
--/*
-- * third stage init callback, register all board devices.
-- */
--int __init board_register_devices(void)
--{
--	if (board.has_uart0)
--		bcm63xx_uart_register(0);
--
--	if (board.has_uart1)
--		bcm63xx_uart_register(1);
--
--	if (board.has_pccard)
--		bcm63xx_pcmcia_register();
--
--	if (board.has_enet0 &&
--	    !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
--		bcm63xx_enet_register(0, &board.enet0);
--
--	if (board.has_enet1 &&
--	    !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
--		bcm63xx_enet_register(1, &board.enet1);
--
--	if (board.has_enetsw &&
--	    !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
--		bcm63xx_enetsw_register(&board.enetsw);
--
--	if (board.has_usbd)
--		bcm63xx_usbd_register(&board.usbd);
--
--	if (board.has_ehci0)
--		bcm63xx_ehci_register();
--
--	if (board.has_ohci0)
--		bcm63xx_ohci_register();
--
--	/* Generate MAC address for WLAN and register our SPROM,
--	 * do this after registering enet devices
--	 */
--#ifdef CONFIG_SSB_PCIHOST
--	if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
--		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--		if (ssb_arch_register_fallback_sprom(
--				&bcm63xx_get_fallback_sprom) < 0)
--			pr_err("failed to register fallback SPROM\n");
- 	}
--#endif /* CONFIG_SSB_PCIHOST */
--
--	bcm63xx_spi_register();
--
--	bcm63xx_hsspi_register();
--
--	bcm63xx_flash_register();
--
--	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
--	bcm63xx_led_data.leds = board.leds;
--
--	platform_device_register(&bcm63xx_gpio_leds);
--
--	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
--		gpio_request_one(board.ephy_reset_gpio,
--				board.ephy_reset_gpio_flags, "ephy-reset");
--
--	return 0;
- }
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -0,0 +1,214 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/ssb/ssb.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_uart.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
-+#include <bcm63xx_gpio.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
-+#include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_usbd.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX	"board: "
-+
-+static struct board_info board;
-+
-+/*
-+ * Register a sane SPROMv2 to make the on-board
-+ * bcm4318 WLAN work
-+ */
-+#ifdef CONFIG_SSB_PCIHOST
-+static struct ssb_sprom bcm63xx_sprom = {
-+	.revision		= 0x02,
-+	.board_rev		= 0x17,
-+	.country_code		= 0x0,
-+	.ant_available_bg	= 0x3,
-+	.pa0b0			= 0x15ae,
-+	.pa0b1			= 0xfa85,
-+	.pa0b2			= 0xfe8d,
-+	.pa1b0			= 0xffff,
-+	.pa1b1			= 0xffff,
-+	.pa1b2			= 0xffff,
-+	.gpio0			= 0xff,
-+	.gpio1			= 0xff,
-+	.gpio2			= 0xff,
-+	.gpio3			= 0xff,
-+	.maxpwr_bg		= 0x004c,
-+	.itssi_bg		= 0x00,
-+	.boardflags_lo		= 0x2848,
-+	.boardflags_hi		= 0x0000,
-+};
-+
-+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+{
-+	if (bus->bustype == SSB_BUSTYPE_PCI) {
-+		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+		return 0;
-+	} else {
-+		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+		return -EINVAL;
-+	}
-+}
-+#endif
-+
-+/*
-+ * return board name for /proc/cpuinfo
-+ */
-+const char *board_get_name(void)
-+{
-+	return board.name;
-+}
-+
-+/*
-+ * setup board for device registration
-+ */
-+void __init board_early_setup(const struct board_info *target)
-+{
-+	u32 val;
-+
-+	memcpy(&board, target, sizeof(board));
-+
-+	/* setup pin multiplexing depending on board enabled device,
-+	 * this has to be done this early since PCI init is done
-+	 * inside arch_initcall */
-+	val = 0;
-+
-+#ifdef CONFIG_PCI
-+	if (board.has_pci) {
-+		bcm63xx_pci_enabled = 1;
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G2_PCI;
-+	}
-+#endif
-+
-+	if (board.has_pccard) {
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+	}
-+
-+	if (board.has_enet0 && !board.enet0.use_internal_phy) {
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G3_EXT_MII |
-+				GPIO_MODE_6348_G0_EXT_MII;
-+	}
-+
-+	if (board.has_enet1 && !board.enet1.use_internal_phy) {
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G3_EXT_MII |
-+				GPIO_MODE_6348_G0_EXT_MII;
-+	}
-+
-+	bcm_gpio_writel(val, GPIO_MODE_REG);
-+}
-+
-+
-+/*
-+ * second stage init callback, good time to panic if we couldn't
-+ * identify on which board we're running since early printk is working
-+ */
-+void __init board_setup(void)
-+{
-+	if (!board.name[0])
-+		panic("unable to detect bcm963xx board");
-+	printk(KERN_INFO PFX "board name: %s\n", board.name);
-+
-+	/* make sure we're running on expected cpu */
-+	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-+		panic("unexpected CPU for bcm963xx board");
-+}
-+
-+static struct gpio_led_platform_data bcm63xx_led_data;
-+
-+static struct platform_device bcm63xx_gpio_leds = {
-+	.name			= "leds-gpio",
-+	.id			= 0,
-+	.dev.platform_data	= &bcm63xx_led_data,
-+};
-+
-+/*
-+ * third stage init callback, register all board devices.
-+ */
-+int __init board_register_devices(void)
-+{
-+	if (board.has_uart0)
-+		bcm63xx_uart_register(0);
-+
-+	if (board.has_uart1)
-+		bcm63xx_uart_register(1);
-+
-+	if (board.has_pccard)
-+		bcm63xx_pcmcia_register();
-+
-+	if (board.has_enet0 &&
-+	    !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
-+		bcm63xx_enet_register(0, &board.enet0);
-+
-+	if (board.has_enet1 &&
-+	    !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
-+		bcm63xx_enet_register(1, &board.enet1);
-+
-+	if (board.has_enetsw &&
-+	    !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
-+		bcm63xx_enetsw_register(&board.enetsw);
-+
-+	if (board.has_usbd)
-+		bcm63xx_usbd_register(&board.usbd);
-+
-+	if (board.has_ehci0)
-+		bcm63xx_ehci_register();
-+
-+	if (board.has_ohci0)
-+		bcm63xx_ohci_register();
-+
-+	/* Generate MAC address for WLAN and register our SPROM,
-+	 * do this after registering enet devices
-+	 */
-+#ifdef CONFIG_SSB_PCIHOST
-+	if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-+		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+		if (ssb_arch_register_fallback_sprom(
-+				&bcm63xx_get_fallback_sprom) < 0)
-+			pr_err(PFX "failed to register fallback SPROM\n");
-+	}
-+#endif
-+
-+	bcm63xx_spi_register();
-+
-+	bcm63xx_hsspi_register();
-+
-+	bcm63xx_flash_register();
-+
-+	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
-+	bcm63xx_led_data.leds = board.leds;
-+
-+	platform_device_register(&bcm63xx_gpio_leds);
-+
-+	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
-+		gpio_request_one(board.ephy_reset_gpio,
-+				board.ephy_reset_gpio_flags, "ephy-reset");
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -0,0 +1,8 @@
-+#ifndef __BOARD_COMMON_H
-+#define __BOARD_COMMON_H
-+
-+#include <board_bcm963xx.h>
-+
-+void board_early_setup(const struct board_info *board);
-+
-+#endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-5.4/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch b/target/linux/bcm63xx/patches-5.4/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch
deleted file mode 100644
index 3cf3afd49d..0000000000
--- a/target/linux/bcm63xx/patches-5.4/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 4e9c34a37bd3442b286ba55441bfe22c1ac5b65f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:08:06 +0100
-Subject: [PATCH 41/44] MIPS: BCM63XX: pass a mac addresss allocator to board
- setup
-
-Pass a mac address allocator to board setup code to allow board
-implementations to work with third party bootloaders not using nvram
-for configuration storage.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  3 ++-
- arch/mips/bcm63xx/boards/board_common.c   | 16 ++++++++++------
- arch/mips/bcm63xx/boards/board_common.h   |  3 ++-
- 3 files changed, 14 insertions(+), 8 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -738,7 +738,8 @@ void __init board_prom_init(void)
- 		if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
- 			continue;
- 		/* copy, board desc array is marked initdata */
--		board_early_setup(bcm963xx_boards[i]);
-+		board_early_setup(bcm963xx_boards[i],
-+				  bcm63xx_nvram_get_mac_address);
- 		break;
- 	}
- 
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -18,7 +18,6 @@
- #include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
--#include <bcm63xx_nvram.h>
- #include <bcm63xx_gpio.h>
- #include <bcm63xx_dev_pci.h>
- #include <bcm63xx_dev_enet.h>
-@@ -81,15 +80,20 @@ const char *board_get_name(void)
- 	return board.name;
- }
- 
-+static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
-+
- /*
-  * setup board for device registration
-  */
--void __init board_early_setup(const struct board_info *target)
-+void __init board_early_setup(const struct board_info *target,
-+			      int (*get_mac_address)(u8 mac[ETH_ALEN]))
- {
- 	u32 val;
- 
- 	memcpy(&board, target, sizeof(board));
- 
-+	board_get_mac_address = get_mac_address;
-+
- 	/* setup pin multiplexing depending on board enabled device,
- 	 * this has to be done this early since PCI init is done
- 	 * inside arch_initcall */
-@@ -162,15 +166,15 @@ int __init board_register_devices(void)
- 		bcm63xx_pcmcia_register();
- 
- 	if (board.has_enet0 &&
--	    !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
-+	    !board_get_mac_address(board.enet0.mac_addr))
- 		bcm63xx_enet_register(0, &board.enet0);
- 
- 	if (board.has_enet1 &&
--	    !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
-+	    !board_get_mac_address(board.enet1.mac_addr))
- 		bcm63xx_enet_register(1, &board.enet1);
- 
- 	if (board.has_enetsw &&
--	    !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
-+	    !board_get_mac_address(board.enetsw.mac_addr))
- 		bcm63xx_enetsw_register(&board.enetsw);
- 
- 	if (board.has_usbd)
-@@ -186,7 +190,7 @@ int __init board_register_devices(void)
- 	 * do this after registering enet devices
- 	 */
- #ifdef CONFIG_SSB_PCIHOST
--	if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-+	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
- 		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- 		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- 		if (ssb_arch_register_fallback_sprom(
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -3,6 +3,7 @@
- 
- #include <board_bcm963xx.h>
- 
--void board_early_setup(const struct board_info *board);
-+void board_early_setup(const struct board_info *board,
-+		       int (*get_mac_address)(u8 mac[ETH_ALEN]));
- 
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-5.4/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch b/target/linux/bcm63xx/patches-5.4/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch
deleted file mode 100644
index 00bbadcb95..0000000000
--- a/target/linux/bcm63xx/patches-5.4/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch
+++ /dev/null
@@ -1,455 +0,0 @@
-From 301744ecbeece89ab3a9d6beef7802fa22598f00 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:53:12 +0100
-Subject: [PATCH 1/5] irqchip: add support for bcm6345-style periphery irq
- controller
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- .../brcm,bcm6345-periph-intc.txt                   |   50 +++
- drivers/irqchip/Kconfig                            |    4 +
- drivers/irqchip/Makefile                           |    1 +
- drivers/irqchip/irq-bcm6345-periph.c               |  339 ++++++++++++++++++++
- include/linux/irqchip/irq-bcm6345-periph.h         |   16 +
- 5 files changed, 410 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
- create mode 100644 drivers/irqchip/irq-bcm6345-periph.c
- create mode 100644 include/linux/irqchip/irq-bcm6345-periph.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
-@@ -0,0 +1,50 @@
-+Broadcom BCM6345 Level 1 periphery interrupt controller
-+
-+This block is a  interrupt controller that is typically connected directly
-+to one of the HW INT lines on each CPU.  Every BCM63XX xDSL chip since
-+BCM6345 has contained this hardware.
-+
-+Key elements of the hardware design include:
-+
-+- 32, 64, or 128 incoming level IRQ lines
-+
-+- All onchip peripherals are wired directly to an L2 input
-+
-+- A separate instance of the register set for each CPU, allowing individual
-+  peripheral IRQs to be routed to any CPU
-+
-+- No atomic mask/unmask operations
-+
-+- No polarity/level/edge settings
-+
-+- No FIFO or priority encoder logic; software is expected to read all
-+  1-4 status words to determine which IRQs are pending
-+
-+Required properties:
-+
-+- compatible: Should be "brcm,bcm6345-periph-intc".
-+- reg: Specifies the base physical address and size of the registers.
-+  Multiple register addresses may be specified, and must match the amount of
-+  parent interrupts.
-+- interrupt-controller: Identifies the node as an interrupt controller.
-+- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
-+  source, should be 1.
-+- interrupt-parent: Specifies the phandle to the parent interrupt controller
-+  this one is cascaded from.
-+- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
-+  node, valid values depend on the type of parent interrupt controller.
-+  Multiple lines are used to route interrupts to different cpus, with the first
-+  assumed to be for the boot CPU.
-+
-+Example:
-+
-+periph_intc: interrupt-controller@f0406800 {
-+	compatible = "brcm,bcm6345-periph-intc";
-+	reg = <0x10000020 0x10>, <0x10000030 0x10>;
-+
-+	interrupt-controller;
-+	#interrupt-cells = <1>;
-+
-+	interrupt-parent = <&cpu_intc>;
-+	interrupts = <2>, <3>;
-+};
---- a/drivers/irqchip/Kconfig
-+++ b/drivers/irqchip/Kconfig
-@@ -145,6 +145,10 @@ config DAVINCI_CP_INTC
- 	select GENERIC_IRQ_CHIP
- 	select IRQ_DOMAIN
- 
-+config BCM6345_PERIPH_IRQ
-+	bool
-+	select IRQ_DOMAIN
-+
- config DW_APB_ICTL
- 	bool
- 	select GENERIC_IRQ_CHIP
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
- obj-$(CONFIG_IRQ_MXS)			+= irq-mxs.o
- obj-$(CONFIG_ARCH_TEGRA)		+= irq-tegra.o
- obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
-+obj-$(CONFIG_BCM6345_PERIPH_IRQ)	+= irq-bcm6345-periph.o
- obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
- obj-$(CONFIG_CLPS711X_IRQCHIP)		+= irq-clps711x.o
- obj-$(CONFIG_OMPIC)			+= irq-ompic.o
---- /dev/null
-+++ b/drivers/irqchip/irq-bcm6345-periph.c
-@@ -0,0 +1,339 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#include <linux/ioport.h>
-+#include <linux/irq.h>
-+#include <linux/irqchip.h>
-+#include <linux/irqchip/chained_irq.h>
-+#include <linux/irqchip/irq-bcm6345-periph.h>
-+#include <linux/kernel.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#ifdef CONFIG_BCM63XX
-+#include <asm/mach-bcm63xx/bcm63xx_irq.h>
-+
-+#define VIRQ_BASE	IRQ_INTERNAL_BASE
-+#else
-+#define VIRQ_BASE	0
-+#endif
-+
-+#define MAX_WORDS	4
-+#define MAX_PARENT_IRQS	2
-+#define IRQS_PER_WORD	32
-+
-+struct intc_block {
-+	int parent_irq;
-+	void __iomem *base;
-+	void __iomem *en_reg[MAX_WORDS];
-+	void __iomem *status_reg[MAX_WORDS];
-+	u32 mask_cache[MAX_WORDS];
-+};
-+
-+struct intc_data {
-+	struct irq_chip chip;
-+	struct intc_block block[MAX_PARENT_IRQS];
-+
-+	int num_words;
-+
-+	struct irq_domain *domain;
-+	raw_spinlock_t lock;
-+};
-+
-+static void bcm6345_periph_irq_handle(struct irq_desc *desc)
-+{
-+	struct intc_data *data = irq_desc_get_handler_data(desc);
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+	struct intc_block *block;
-+	unsigned int irq = irq_desc_get_irq(desc);
-+	unsigned int idx;
-+
-+	chained_irq_enter(chip, desc);
-+
-+	for (idx = 0; idx < MAX_PARENT_IRQS; idx++)
-+		if (irq == data->block[idx].parent_irq)
-+			block = &data->block[idx];
-+
-+	for (idx = 0; idx < data->num_words; idx++) {
-+		int base = idx * IRQS_PER_WORD;
-+		unsigned long pending;
-+		int hw_irq;
-+
-+		raw_spin_lock(&data->lock);
-+		pending = __raw_readl(block->en_reg[idx]) &
-+			  __raw_readl(block->status_reg[idx]);
-+		raw_spin_unlock(&data->lock);
-+
-+		for_each_set_bit(hw_irq, &pending, IRQS_PER_WORD) {
-+			int virq;
-+
-+			virq  = irq_find_mapping(data->domain, base + hw_irq);
-+			generic_handle_irq(virq);
-+		}
-+	}
-+
-+	chained_irq_exit(chip, desc);
-+}
-+
-+static void __bcm6345_periph_enable(struct intc_block *block, int reg, int bit,
-+				    bool enable)
-+{
-+	u32 val;
-+
-+	val = __raw_readl(block->en_reg[reg]);
-+	if (enable)
-+		val |= BIT(bit);
-+	else
-+		val &= ~BIT(bit);
-+	__raw_writel(val, block->en_reg[reg]);
-+}
-+
-+static void bcm6345_periph_irq_mask(struct irq_data *data)
-+{
-+	unsigned int i, reg, bit;
-+	struct intc_data *priv = data->domain->host_data;
-+	irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+
-+	reg = hwirq / IRQS_PER_WORD;
-+	bit = hwirq % IRQS_PER_WORD;
-+
-+	raw_spin_lock(&priv->lock);
-+	for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+		struct intc_block *block = &priv->block[i];
-+
-+		if (!block->parent_irq)
-+			break;
-+
-+		__bcm6345_periph_enable(block, reg, bit, false);
-+	}
-+	raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_periph_irq_unmask(struct irq_data *data)
-+{
-+	struct intc_data *priv = data->domain->host_data;
-+	irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+	unsigned int i, reg, bit;
-+
-+	reg = hwirq / IRQS_PER_WORD;
-+	bit = hwirq % IRQS_PER_WORD;
-+
-+	raw_spin_lock(&priv->lock);
-+	for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+		struct intc_block *block = &priv->block[i];
-+
-+		if (!block->parent_irq)
-+			break;
-+
-+		if (block->mask_cache[reg] & BIT(bit))
-+			__bcm6345_periph_enable(block, reg, bit, true);
-+		else
-+			__bcm6345_periph_enable(block, reg, bit, false);
-+	}
-+	raw_spin_unlock(&priv->lock);
-+}
-+
-+#ifdef CONFIG_SMP
-+static int bcm6345_periph_set_affinity(struct irq_data *data,
-+				       const struct cpumask *mask, bool force)
-+{
-+	irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+	struct intc_data *priv = data->domain->host_data;
-+	unsigned int i, reg, bit;
-+	unsigned long flags;
-+	bool enabled;
-+	int cpu;
-+
-+	reg = hwirq / IRQS_PER_WORD;
-+	bit = hwirq % IRQS_PER_WORD;
-+
-+	/* we could route to more than one cpu, but performance
-+	   suffers, so fix it to one.
-+	 */
-+	cpu = cpumask_any_and(mask, cpu_online_mask);
-+	if (cpu >= nr_cpu_ids)
-+		return -EINVAL;
-+
-+	if (cpu >= MAX_PARENT_IRQS)
-+		return -EINVAL;
-+
-+	if (!priv->block[cpu].parent_irq)
-+		return -EINVAL;
-+
-+	raw_spin_lock_irqsave(&priv->lock, flags);
-+	enabled = !irqd_irq_masked(data);
-+	for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+		struct intc_block *block = &priv->block[i];
-+
-+		if (!block->parent_irq)
-+			break;
-+
-+		if (i == cpu) {
-+			block->mask_cache[reg] |= BIT(bit);
-+			__bcm6345_periph_enable(block, reg, bit, enabled);
-+		} else {
-+			block->mask_cache[reg] &= ~BIT(bit);
-+			__bcm6345_periph_enable(block, reg, bit, false);
-+		}
-+	}
-+	raw_spin_unlock_irqrestore(&priv->lock, flags);
-+
-+	return 0;
-+}
-+#endif
-+
-+static int bcm6345_periph_map(struct irq_domain *d, unsigned int irq,
-+			      irq_hw_number_t hw)
-+{
-+	struct intc_data *priv = d->host_data;
-+
-+	irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops bcm6345_periph_domain_ops = {
-+	.xlate = irq_domain_xlate_onecell,
-+	.map = bcm6345_periph_map,
-+};
-+
-+static int __init __bcm6345_periph_intc_init(struct device_node *node,
-+					     int num_blocks, int *irq,
-+					     void __iomem **base, int num_words)
-+{
-+	struct intc_data *data;
-+	unsigned int i, w, status_offset;
-+
-+	data = kzalloc(sizeof(*data), GFP_KERNEL);
-+	if (!data)
-+		return -ENOMEM;
-+
-+	raw_spin_lock_init(&data->lock);
-+
-+	status_offset = num_words * sizeof(u32);
-+
-+	for (i = 0; i < num_blocks; i++) {
-+		struct intc_block *block = &data->block[i];
-+
-+		block->parent_irq = irq[i];
-+		block->base = base[i];
-+
-+		for (w = 0; w < num_words; w++) {
-+			int word_offset = sizeof(u32) * ((num_words - w) - 1);
-+
-+			block->en_reg[w] = base[i] + word_offset;
-+			block->status_reg[w] = base[i] + status_offset;
-+			block->status_reg[w] += word_offset;
-+
-+			/* route all interrupts to line 0 by default */
-+			if (i == 0)
-+				block->mask_cache[w] = 0xffffffff;
-+		}
-+
-+		irq_set_handler_data(block->parent_irq, data);
-+		irq_set_chained_handler(block->parent_irq,
-+					bcm6345_periph_irq_handle);
-+	}
-+
-+	data->num_words = num_words;
-+
-+	data->chip.name = "bcm6345-periph-intc";
-+	data->chip.irq_mask = bcm6345_periph_irq_mask;
-+	data->chip.irq_unmask = bcm6345_periph_irq_unmask;
-+
-+#ifdef CONFIG_SMP
-+	if (num_blocks > 1)
-+		data->chip.irq_set_affinity = bcm6345_periph_set_affinity;
-+#endif
-+
-+	data->domain = irq_domain_add_simple(node, IRQS_PER_WORD * num_words,
-+					     VIRQ_BASE,
-+					     &bcm6345_periph_domain_ops, data);
-+	if (!data->domain) {
-+		kfree(data);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+void __init bcm6345_periph_intc_init(int num_blocks, int *irq,
-+				     void __iomem **base, int num_words)
-+{
-+	__bcm6345_periph_intc_init(NULL, num_blocks, irq, base, num_words);
-+}
-+
-+#ifdef CONFIG_OF
-+static int __init bcm6345_periph_of_init(struct device_node *node,
-+					 struct device_node *parent)
-+{
-+	struct resource res;
-+	int num_irqs, ret = -EINVAL;
-+	int irqs[MAX_PARENT_IRQS] = { 0 };
-+	void __iomem *bases[MAX_PARENT_IRQS] = { NULL };
-+	int words = 0;
-+	int i;
-+
-+	num_irqs = of_irq_count(node);
-+
-+	if (num_irqs < 1 || num_irqs > MAX_PARENT_IRQS)
-+		return -EINVAL;
-+
-+	for (i = 0; i < num_irqs; i++) {
-+		resource_size_t size;
-+
-+		irqs[i] = irq_of_parse_and_map(node, i);
-+		if (!irqs[i])
-+			goto out_unmap;
-+
-+		if (of_address_to_resource(node, i, &res))
-+			goto out_unmap;
-+
-+		size = resource_size(&res);
-+		switch (size) {
-+		case 8:
-+		case 16:
-+		case 32:
-+			size = size / 8;
-+			break;
-+		default:
-+			goto out_unmap;
-+		}
-+
-+		if (words && words != size) {
-+			ret = -EINVAL;
-+			goto out_unmap;
-+		}
-+		words = size;
-+
-+		bases[i] = of_iomap(node, i);
-+		if (!bases[i]) {
-+			ret = -ENOMEM;
-+			goto out_unmap;
-+		}
-+	}
-+
-+	ret = __bcm6345_periph_intc_init(node, num_irqs, irqs, bases, words);
-+	if (!ret)
-+		return 0;
-+
-+out_unmap:
-+	for (i = 0; i < num_irqs; i++) {
-+		iounmap(bases[i]);
-+		irq_dispose_mapping(irqs[i]);
-+	}
-+
-+	return ret;
-+}
-+
-+IRQCHIP_DECLARE(bcm6345_periph_intc, "brcm,bcm6345-l1-intc",
-+		bcm6345_periph_of_init);
-+#endif
---- /dev/null
-+++ b/include/linux/irqchip/irq-bcm6345-periph.h
-@@ -0,0 +1,16 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Nicolas Schichan <nschichan@freebox.fr>
-+ */
-+
-+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
-+#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
-+
-+void bcm6345_periph_intc_init(int num_blocks, int *irq, void __iomem **base,
-+			      int num_words);
-+
-+#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H */
diff --git a/target/linux/bcm63xx/patches-5.4/321-irqchip-add-support-for-bcm6345-style-external-inter.patch b/target/linux/bcm63xx/patches-5.4/321-irqchip-add-support-for-bcm6345-style-external-inter.patch
deleted file mode 100644
index 9c265ade90..0000000000
--- a/target/linux/bcm63xx/patches-5.4/321-irqchip-add-support-for-bcm6345-style-external-inter.patch
+++ /dev/null
@@ -1,394 +0,0 @@
-From cf908990d4a8ccdb73ee4484aa8cadad379ca314 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:54:27 +0100
-Subject: [PATCH 2/5] irqchip: add support for bcm6345-style external
- interrupt controller
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- .../interrupt-controller/brcm,bcm6345-ext-intc.txt |   29 ++
- drivers/irqchip/Kconfig                            |    4 +
- drivers/irqchip/Makefile                           |    1 +
- drivers/irqchip/irq-bcm6345-ext.c                  |  287 ++++++++++++++++++++
- include/linux/irqchip/irq-bcm6345-ext.h            |   14 +
- 5 files changed, 335 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
- create mode 100644 drivers/irqchip/irq-bcm6345-ext.c
- create mode 100644 include/linux/irqchip/irq-bcm6345-ext.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
-@@ -0,0 +1,29 @@
-+Broadcom BCM6345-style external interrupt controller
-+
-+Required properties:
-+
-+- compatible: Should be "brcm,bcm6345-ext-intc" or "brcm,bcm6318-ext-intc".
-+- reg: Specifies the base physical addresses and size of the registers.
-+- interrupt-controller: identifies the node as an interrupt controller.
-+- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
-+  source, Should be 2.
-+- interrupt-parent: Specifies the phandle to the parent interrupt controller
-+  this one is cascaded from.
-+- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
-+  node, valid values depend on the type of parent interrupt controller.
-+
-+Optional properties:
-+
-+- brcm,field-width: Size of each field (mask, clear, sense, ...) in bits in the
-+  register. Defaults to 4.
-+
-+Example:
-+
-+ext_intc: interrupt-controller@10000018 {
-+	compatible = "brcm,bcm6345-ext-intc";
-+	interrupt-parent = <&periph_intc>;
-+	#interrupt-cells = <2>;
-+	reg = <0x10000018 0x4>;
-+	interrupt-controller;
-+	interrupts = <24>, <25>, <26>, <27>;
-+};
---- a/drivers/irqchip/Kconfig
-+++ b/drivers/irqchip/Kconfig
-@@ -145,6 +145,10 @@ config DAVINCI_CP_INTC
- 	select GENERIC_IRQ_CHIP
- 	select IRQ_DOMAIN
- 
-+config BCM6345_EXT_IRQ
-+	bool
-+	select IRQ_DOMAIN
-+
- config BCM6345_PERIPH_IRQ
- 	bool
- 	select IRQ_DOMAIN
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
- obj-$(CONFIG_IRQ_MXS)			+= irq-mxs.o
- obj-$(CONFIG_ARCH_TEGRA)		+= irq-tegra.o
- obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
-+obj-$(CONFIG_BCM6345_EXT_IRQ)		+= irq-bcm6345-ext.o
- obj-$(CONFIG_BCM6345_PERIPH_IRQ)	+= irq-bcm6345-periph.o
- obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
- obj-$(CONFIG_CLPS711X_IRQCHIP)		+= irq-clps711x.o
---- /dev/null
-+++ b/drivers/irqchip/irq-bcm6345-ext.c
-@@ -0,0 +1,301 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#include <linux/ioport.h>
-+#include <linux/irq.h>
-+#include <linux/irqchip.h>
-+#include <linux/irqchip/chained_irq.h>
-+#include <linux/irqchip/irq-bcm6345-ext.h>
-+#include <linux/kernel.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#ifdef CONFIG_BCM63XX
-+#include <asm/mach-bcm63xx/bcm63xx_irq.h>
-+
-+#define VIRQ_BASE		IRQ_EXTERNAL_BASE
-+#else
-+#define VIRQ_BASE		0
-+#endif
-+
-+#define MAX_IRQS		4
-+
-+#define EXTIRQ_CFG_SENSE	0
-+#define EXTIRQ_CFG_STAT		1
-+#define EXTIRQ_CFG_CLEAR	2
-+#define EXTIRQ_CFG_MASK		3
-+#define EXTIRQ_CFG_BOTHEDGE	4
-+#define EXTIRQ_CFG_LEVELSENSE	5
-+
-+struct intc_data {
-+	struct irq_chip chip;
-+	struct irq_domain *domain;
-+	raw_spinlock_t lock;
-+
-+	int parent_irq[MAX_IRQS];
-+	void __iomem *reg;
-+	int shift;
-+	unsigned int toggle_clear_on_ack:1;
-+};
-+
-+static void bcm6345_ext_intc_irq_handle(struct irq_desc *desc)
-+{
-+	struct intc_data *data = irq_desc_get_handler_data(desc);
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+	unsigned int irq = irq_desc_get_irq(desc);
-+	unsigned int idx;
-+
-+	chained_irq_enter(chip, desc);
-+
-+	for (idx = 0; idx < MAX_IRQS; idx++) {
-+		if (data->parent_irq[idx] != irq)
-+			continue;
-+
-+		generic_handle_irq(irq_find_mapping(data->domain, idx));
-+	}
-+
-+	chained_irq_exit(chip, desc);
-+}
-+
-+static void bcm6345_ext_intc_irq_ack(struct irq_data *data)
-+{
-+	struct intc_data *priv = data->domain->host_data;
-+	irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+	u32 reg;
-+
-+	raw_spin_lock(&priv->lock);
-+	reg = __raw_readl(priv->reg);
-+	__raw_writel(reg | (1 << (hwirq + EXTIRQ_CFG_CLEAR * priv->shift)),
-+		     priv->reg);
-+	if (priv->toggle_clear_on_ack)
-+		__raw_writel(reg, priv->reg);
-+	raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_ext_intc_irq_mask(struct irq_data *data)
-+{
-+	struct intc_data *priv = data->domain->host_data;
-+	irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+	u32 reg;
-+
-+	raw_spin_lock(&priv->lock);
-+	reg = __raw_readl(priv->reg);
-+	reg &= ~(1 << (hwirq + EXTIRQ_CFG_MASK * priv->shift));
-+	__raw_writel(reg, priv->reg);
-+	raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_ext_intc_irq_unmask(struct irq_data *data)
-+{
-+	struct intc_data *priv = data->domain->host_data;
-+	irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+	u32 reg;
-+
-+	raw_spin_lock(&priv->lock);
-+	reg = __raw_readl(priv->reg);
-+	reg |= 1 << (hwirq + EXTIRQ_CFG_MASK * priv->shift);
-+	__raw_writel(reg, priv->reg);
-+	raw_spin_unlock(&priv->lock);
-+}
-+
-+static int bcm6345_ext_intc_set_type(struct irq_data *data,
-+				     unsigned int flow_type)
-+{
-+	struct intc_data *priv = data->domain->host_data;
-+	irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+	bool levelsense = 0, sense = 0, bothedge = 0;
-+	u32 reg;
-+
-+	flow_type &= IRQ_TYPE_SENSE_MASK;
-+
-+	if (flow_type == IRQ_TYPE_NONE)
-+		flow_type = IRQ_TYPE_LEVEL_LOW;
-+
-+	switch (flow_type) {
-+	case IRQ_TYPE_EDGE_BOTH:
-+		bothedge = 1;
-+		break;
-+
-+	case IRQ_TYPE_EDGE_RISING:
-+		sense = 1;
-+		break;
-+
-+	case IRQ_TYPE_EDGE_FALLING:
-+		break;
-+
-+	case IRQ_TYPE_LEVEL_HIGH:
-+		levelsense = 1;
-+		sense = 1;
-+		break;
-+
-+	case IRQ_TYPE_LEVEL_LOW:
-+		levelsense = 1;
-+		break;
-+
-+	default:
-+		pr_err("bogus flow type combination given!\n");
-+		return -EINVAL;
-+	}
-+
-+	raw_spin_lock(&priv->lock);
-+	reg = __raw_readl(priv->reg);
-+
-+	if (levelsense)
-+		reg |= 1 << (hwirq + EXTIRQ_CFG_LEVELSENSE * priv->shift);
-+	else
-+		reg &= ~(1 << (hwirq + EXTIRQ_CFG_LEVELSENSE * priv->shift));
-+	if (sense)
-+		reg |= 1 << (hwirq + EXTIRQ_CFG_SENSE * priv->shift);
-+	else
-+		reg &= ~(1 << (hwirq + EXTIRQ_CFG_SENSE * priv->shift));
-+	if (bothedge)
-+		reg |= 1 << (hwirq + EXTIRQ_CFG_BOTHEDGE * priv->shift);
-+	else
-+		reg &= ~(1 << (hwirq + EXTIRQ_CFG_BOTHEDGE * priv->shift));
-+
-+	__raw_writel(reg, priv->reg);
-+	raw_spin_unlock(&priv->lock);
-+
-+	irqd_set_trigger_type(data, flow_type);
-+	if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
-+		irq_set_handler_locked(data, handle_level_irq);
-+	else
-+		irq_set_handler_locked(data, handle_edge_irq);
-+
-+	return 0;
-+}
-+
-+static int bcm6345_ext_intc_map(struct irq_domain *d, unsigned int irq,
-+				irq_hw_number_t hw)
-+{
-+	struct intc_data *priv = d->host_data;
-+
-+	irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops bcm6345_ext_domain_ops = {
-+	.xlate = irq_domain_xlate_twocell,
-+	.map = bcm6345_ext_intc_map,
-+};
-+
-+static int __init __bcm6345_ext_intc_init(struct device_node *node,
-+					  int num_irqs, int *irqs,
-+					  void __iomem *reg, int shift,
-+					  bool toggle_clear_on_ack)
-+{
-+	struct intc_data *data;
-+	unsigned int i;
-+	int start = VIRQ_BASE;
-+
-+	data = kzalloc(sizeof(*data), GFP_KERNEL);
-+	if (!data)
-+		return -ENOMEM;
-+
-+	raw_spin_lock_init(&data->lock);
-+
-+	for (i = 0; i < num_irqs; i++) {
-+		data->parent_irq[i] = irqs[i];
-+
-+		irq_set_handler_data(irqs[i], data);
-+		irq_set_chained_handler(irqs[i], bcm6345_ext_intc_irq_handle);
-+	}
-+
-+	data->reg = reg;
-+	data->shift = shift;
-+	data->toggle_clear_on_ack = toggle_clear_on_ack;
-+
-+	data->chip.name = "bcm6345-ext-intc";
-+	data->chip.irq_ack = bcm6345_ext_intc_irq_ack;
-+	data->chip.irq_mask = bcm6345_ext_intc_irq_mask;
-+	data->chip.irq_unmask = bcm6345_ext_intc_irq_unmask;
-+	data->chip.irq_set_type = bcm6345_ext_intc_set_type;
-+
-+	/*
-+	 * If we have less than 4 irqs, this is the second controller on
-+	 * bcm63xx. So increase the VIRQ start to not overlap with the first
-+	 * one, but only do so if we actually use a non-zero start.
-+	 *
-+	 * This can be removed when bcm63xx has no legacy users anymore.
-+	 */
-+	if (start && num_irqs < 4)
-+		start += 4;
-+
-+	data->domain = irq_domain_add_simple(node, num_irqs, start,
-+					     &bcm6345_ext_domain_ops, data);
-+	if (!data->domain) {
-+		kfree(data);
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
-+
-+void __init bcm6345_ext_intc_init(int num_irqs, int *irqs, void __iomem *reg,
-+				  int shift)
-+{
-+	__bcm6345_ext_intc_init(NULL, num_irqs, irqs, reg, shift, false);
-+}
-+
-+#ifdef CONFIG_OF
-+static int __init bcm6345_ext_intc_of_init(struct device_node *node,
-+					   struct device_node *parent)
-+{
-+	int num_irqs, ret = -EINVAL;
-+	unsigned i;
-+	void __iomem *base;
-+	int irqs[MAX_IRQS] = { 0 };
-+	u32 shift;
-+	bool toggle_clear_on_ack = false;
-+
-+	num_irqs = of_irq_count(node);
-+
-+	if (!num_irqs || num_irqs > MAX_IRQS)
-+		return -EINVAL;
-+
-+	if (of_property_read_u32(node, "brcm,field-width", &shift))
-+		shift = 4;
-+
-+	/* on BCM6318 setting CLEAR seems to continuously mask interrupts */
-+	if (of_device_is_compatible(node, "brcm,bcm6318-ext-intc"))
-+		toggle_clear_on_ack = true;
-+
-+	for (i = 0; i < num_irqs; i++) {
-+		irqs[i] = irq_of_parse_and_map(node, i);
-+		if (!irqs[i]) {
-+			ret = -ENOMEM;
-+			goto out_unmap;
-+		}
-+	}
-+
-+	base = of_iomap(node, 0);
-+	if (!base)
-+		goto out_unmap;
-+
-+	ret = __bcm6345_ext_intc_init(node, num_irqs, irqs, base, shift,
-+				      toggle_clear_on_ack);
-+	if (!ret)
-+		return 0;
-+out_unmap:
-+	iounmap(base);
-+
-+	for (i = 0; i < num_irqs; i++)
-+		irq_dispose_mapping(irqs[i]);
-+
-+	return ret;
-+}
-+
-+IRQCHIP_DECLARE(bcm6318_ext_intc, "brcm,bcm6318-ext-intc",
-+		bcm6345_ext_intc_of_init);
-+IRQCHIP_DECLARE(bcm6345_ext_intc, "brcm,bcm6345-ext-intc",
-+		bcm6345_ext_intc_of_init);
-+#endif
---- /dev/null
-+++ b/include/linux/irqchip/irq-bcm6345-ext.h
-@@ -0,0 +1,14 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
-+#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
-+
-+void bcm6345_ext_intc_init(int n_irqs, int *irqs, void __iomem *reg, int shift);
-+
-+#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H */
diff --git a/target/linux/bcm63xx/patches-5.4/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch b/target/linux/bcm63xx/patches-5.4/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch
deleted file mode 100644
index 7fe81ba5b0..0000000000
--- a/target/linux/bcm63xx/patches-5.4/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch
+++ /dev/null
@@ -1,695 +0,0 @@
-From d2d2489e0a4b740abd980e9d1cad952d15bc2d9e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:55:02 +0100
-Subject: [PATCH] MIPS: BCM63XX: switch to IRQ_DOMAIN
-
-Now that we have working IRQ_DOMAIN drivers for both interrupt controllers,
-switch to using them.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig       |   3 +
- arch/mips/bcm63xx/irq.c | 612 +++++++++---------------------------------------
- 2 files changed, 108 insertions(+), 507 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -294,6 +294,9 @@ config BCM63XX
- 	select SYNC_R4K
- 	select DMA_NONCOHERENT
- 	select IRQ_MIPS_CPU
-+	select BCM6345_EXT_IRQ
-+	select BCM6345_PERIPH_IRQ
-+	select IRQ_DOMAIN
- 	select SYS_SUPPORTS_32BIT_KERNEL
- 	select SYS_SUPPORTS_BIG_ENDIAN
- 	select SYS_HAS_EARLY_PRINTK
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -11,7 +11,9 @@
- #include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
--#include <linux/spinlock.h>
-+#include <linux/irqchip.h>
-+#include <linux/irqchip/irq-bcm6345-ext.h>
-+#include <linux/irqchip/irq-bcm6345-periph.h>
- #include <asm/irq_cpu.h>
- #include <asm/mipsregs.h>
- #include <bcm63xx_cpu.h>
-@@ -19,544 +21,140 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
- 
--
--static DEFINE_SPINLOCK(ipic_lock);
--static DEFINE_SPINLOCK(epic_lock);
--
--static u32 irq_stat_addr[2];
--static u32 irq_mask_addr[2];
--static void (*dispatch_internal)(int cpu);
--static int is_ext_irq_cascaded;
--static unsigned int ext_irq_count;
--static unsigned int ext_irq_start, ext_irq_end;
--static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
--static void (*internal_irq_mask)(struct irq_data *d);
--static void (*internal_irq_unmask)(struct irq_data *d, const struct cpumask *m);
--
--
--static inline u32 get_ext_irq_perf_reg(int irq)
--{
--	if (irq < 4)
--		return ext_irq_cfg_reg1;
--	return ext_irq_cfg_reg2;
--}
--
--static inline void handle_internal(int intbit)
--{
--	if (is_ext_irq_cascaded &&
--	    intbit >= ext_irq_start && intbit <= ext_irq_end)
--		do_IRQ(intbit - ext_irq_start + IRQ_EXTERNAL_BASE);
--	else
--		do_IRQ(intbit + IRQ_INTERNAL_BASE);
--}
--
--static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
--				     const struct cpumask *m)
--{
--	bool enable = cpu_online(cpu);
--
--#ifdef CONFIG_SMP
--	if (m)
--		enable &= cpumask_test_cpu(cpu, m);
--	else if (irqd_affinity_was_set(d))
--		enable &= cpumask_test_cpu(cpu, irq_data_get_affinity_mask(d));
--#endif
--	return enable;
--}
--
--/*
-- * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
-- * prioritize any interrupt relatively to another. the static counter
-- * will resume the loop where it ended the last time we left this
-- * function.
-- */
--
--#define BUILD_IPIC_INTERNAL(width)					\
--void __dispatch_internal_##width(int cpu)				\
--{									\
--	u32 pending[width / 32];					\
--	unsigned int src, tgt;						\
--	bool irqs_pending = false;					\
--	static unsigned int i[2];					\
--	unsigned int *next = &i[cpu];					\
--	unsigned long flags;						\
--									\
--	/* read registers in reverse order */				\
--	spin_lock_irqsave(&ipic_lock, flags);				\
--	for (src = 0, tgt = (width / 32); src < (width / 32); src++) {	\
--		u32 val;						\
--									\
--		val = bcm_readl(irq_stat_addr[cpu] + src * sizeof(u32)); \
--		val &= bcm_readl(irq_mask_addr[cpu] + src * sizeof(u32)); \
--		pending[--tgt] = val;					\
--									\
--		if (val)						\
--			irqs_pending = true;				\
--	}								\
--	spin_unlock_irqrestore(&ipic_lock, flags);			\
--									\
--	if (!irqs_pending)						\
--		return;							\
--									\
--	while (1) {							\
--		unsigned int to_call = *next;				\
--									\
--		*next = (*next + 1) & (width - 1);			\
--		if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {	\
--			handle_internal(to_call);			\
--			break;						\
--		}							\
--	}								\
--}									\
--									\
--static void __internal_irq_mask_##width(struct irq_data *d)		\
--{									\
--	u32 val;							\
--	unsigned irq = d->irq - IRQ_INTERNAL_BASE;			\
--	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
--	unsigned bit = irq & 0x1f;					\
--	unsigned long flags;						\
--	int cpu;							\
--									\
--	spin_lock_irqsave(&ipic_lock, flags);				\
--	for_each_present_cpu(cpu) {					\
--		if (!irq_mask_addr[cpu])				\
--			break;						\
--									\
--		val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
--		val &= ~(1 << bit);					\
--		bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
--	}								\
--	spin_unlock_irqrestore(&ipic_lock, flags);			\
--}									\
--									\
--static void __internal_irq_unmask_##width(struct irq_data *d,		\
--					  const struct cpumask *m)	\
--{									\
--	u32 val;							\
--	unsigned irq = d->irq - IRQ_INTERNAL_BASE;			\
--	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
--	unsigned bit = irq & 0x1f;					\
--	unsigned long flags;						\
--	int cpu;							\
--									\
--	spin_lock_irqsave(&ipic_lock, flags);				\
--	for_each_present_cpu(cpu) {					\
--		if (!irq_mask_addr[cpu])				\
--			break;						\
--									\
--		val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
--		if (enable_irq_for_cpu(cpu, d, m))			\
--			val |= (1 << bit);				\
--		else							\
--			val &= ~(1 << bit);				\
--		bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
--	}								\
--	spin_unlock_irqrestore(&ipic_lock, flags);			\
--}
--
--BUILD_IPIC_INTERNAL(32);
--BUILD_IPIC_INTERNAL(64);
--
--asmlinkage void plat_irq_dispatch(void)
--{
--	u32 cause;
--
--	do {
--		cause = read_c0_cause() & read_c0_status() & ST0_IM;
--
--		if (!cause)
--			break;
--
--		if (cause & CAUSEF_IP7)
--			do_IRQ(7);
--		if (cause & CAUSEF_IP0)
--			do_IRQ(0);
--		if (cause & CAUSEF_IP1)
--			do_IRQ(1);
--		if (cause & CAUSEF_IP2)
--			dispatch_internal(0);
--		if (is_ext_irq_cascaded) {
--			if (cause & CAUSEF_IP3)
--				dispatch_internal(1);
--		} else {
--			if (cause & CAUSEF_IP3)
--				do_IRQ(IRQ_EXT_0);
--			if (cause & CAUSEF_IP4)
--				do_IRQ(IRQ_EXT_1);
--			if (cause & CAUSEF_IP5)
--				do_IRQ(IRQ_EXT_2);
--			if (cause & CAUSEF_IP6)
--				do_IRQ(IRQ_EXT_3);
--		}
--	} while (1);
--}
--
--/*
-- * internal IRQs operations: only mask/unmask on PERF irq mask
-- * register.
-- */
--static void bcm63xx_internal_irq_mask(struct irq_data *d)
--{
--	internal_irq_mask(d);
--}
--
--static void bcm63xx_internal_irq_unmask(struct irq_data *d)
--{
--	internal_irq_unmask(d, NULL);
--}
--
--/*
-- * external IRQs operations: mask/unmask and clear on PERF external
-- * irq control register.
-- */
--static void bcm63xx_external_irq_mask(struct irq_data *d)
--{
--	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--	u32 reg, regaddr;
--	unsigned long flags;
--
--	regaddr = get_ext_irq_perf_reg(irq);
--	spin_lock_irqsave(&epic_lock, flags);
--	reg = bcm_perf_readl(regaddr);
--
--	if (BCMCPU_IS_6348())
--		reg &= ~EXTIRQ_CFG_MASK_6348(irq % 4);
--	else
--		reg &= ~EXTIRQ_CFG_MASK(irq % 4);
--
--	bcm_perf_writel(reg, regaddr);
--	spin_unlock_irqrestore(&epic_lock, flags);
--
--	if (is_ext_irq_cascaded)
--		internal_irq_mask(irq_get_irq_data(irq + ext_irq_start));
--}
--
--static void bcm63xx_external_irq_unmask(struct irq_data *d)
--{
--	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--	u32 reg, regaddr;
--	unsigned long flags;
--
--	regaddr = get_ext_irq_perf_reg(irq);
--	spin_lock_irqsave(&epic_lock, flags);
--	reg = bcm_perf_readl(regaddr);
--
--	if (BCMCPU_IS_6348())
--		reg |= EXTIRQ_CFG_MASK_6348(irq % 4);
--	else
--		reg |= EXTIRQ_CFG_MASK(irq % 4);
--
--	bcm_perf_writel(reg, regaddr);
--	spin_unlock_irqrestore(&epic_lock, flags);
--
--	if (is_ext_irq_cascaded)
--		internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start),
--				    NULL);
--}
--
--static void bcm63xx_external_irq_clear(struct irq_data *d)
--{
--	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--	u32 reg, regaddr;
--	unsigned long flags;
--
--	regaddr = get_ext_irq_perf_reg(irq);
--	spin_lock_irqsave(&epic_lock, flags);
--	reg = bcm_perf_readl(regaddr);
--
--	if (BCMCPU_IS_6348())
--		reg |= EXTIRQ_CFG_CLEAR_6348(irq % 4);
--	else
--		reg |= EXTIRQ_CFG_CLEAR(irq % 4);
--
--	bcm_perf_writel(reg, regaddr);
--	spin_unlock_irqrestore(&epic_lock, flags);
--}
--
--static int bcm63xx_external_irq_set_type(struct irq_data *d,
--					 unsigned int flow_type)
--{
--	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--	u32 reg, regaddr;
--	int levelsense, sense, bothedge;
--	unsigned long flags;
--
--	flow_type &= IRQ_TYPE_SENSE_MASK;
--
--	if (flow_type == IRQ_TYPE_NONE)
--		flow_type = IRQ_TYPE_LEVEL_LOW;
--
--	levelsense = sense = bothedge = 0;
--	switch (flow_type) {
--	case IRQ_TYPE_EDGE_BOTH:
--		bothedge = 1;
--		break;
--
--	case IRQ_TYPE_EDGE_RISING:
--		sense = 1;
--		break;
--
--	case IRQ_TYPE_EDGE_FALLING:
--		break;
--
--	case IRQ_TYPE_LEVEL_HIGH:
--		levelsense = 1;
--		sense = 1;
--		break;
--
--	case IRQ_TYPE_LEVEL_LOW:
--		levelsense = 1;
--		break;
--
--	default:
--		pr_err("bogus flow type combination given !\n");
--		return -EINVAL;
--	}
--
--	regaddr = get_ext_irq_perf_reg(irq);
--	spin_lock_irqsave(&epic_lock, flags);
--	reg = bcm_perf_readl(regaddr);
--	irq %= 4;
--
--	switch (bcm63xx_get_cpu_id()) {
--	case BCM6348_CPU_ID:
--		if (levelsense)
--			reg |= EXTIRQ_CFG_LEVELSENSE_6348(irq);
--		else
--			reg &= ~EXTIRQ_CFG_LEVELSENSE_6348(irq);
--		if (sense)
--			reg |= EXTIRQ_CFG_SENSE_6348(irq);
--		else
--			reg &= ~EXTIRQ_CFG_SENSE_6348(irq);
--		if (bothedge)
--			reg |= EXTIRQ_CFG_BOTHEDGE_6348(irq);
--		else
--			reg &= ~EXTIRQ_CFG_BOTHEDGE_6348(irq);
--		break;
--
--	case BCM3368_CPU_ID:
--	case BCM6328_CPU_ID:
--	case BCM6338_CPU_ID:
--	case BCM6345_CPU_ID:
--	case BCM6358_CPU_ID:
--	case BCM6362_CPU_ID:
--	case BCM6368_CPU_ID:
--		if (levelsense)
--			reg |= EXTIRQ_CFG_LEVELSENSE(irq);
--		else
--			reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
--		if (sense)
--			reg |= EXTIRQ_CFG_SENSE(irq);
--		else
--			reg &= ~EXTIRQ_CFG_SENSE(irq);
--		if (bothedge)
--			reg |= EXTIRQ_CFG_BOTHEDGE(irq);
--		else
--			reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
--		break;
--	default:
--		BUG();
--	}
--
--	bcm_perf_writel(reg, regaddr);
--	spin_unlock_irqrestore(&epic_lock, flags);
--
--	irqd_set_trigger_type(d, flow_type);
--	if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
--		irq_set_handler_locked(d, handle_level_irq);
--	else
--		irq_set_handler_locked(d, handle_edge_irq);
--
--	return IRQ_SET_MASK_OK_NOCOPY;
--}
--
--#ifdef CONFIG_SMP
--static int bcm63xx_internal_set_affinity(struct irq_data *data,
--					 const struct cpumask *dest,
--					 bool force)
--{
--	if (!irqd_irq_disabled(data))
--		internal_irq_unmask(data, dest);
--
--	return 0;
--}
--#endif
--
--static struct irq_chip bcm63xx_internal_irq_chip = {
--	.name		= "bcm63xx_ipic",
--	.irq_mask	= bcm63xx_internal_irq_mask,
--	.irq_unmask	= bcm63xx_internal_irq_unmask,
--};
--
--static struct irq_chip bcm63xx_external_irq_chip = {
--	.name		= "bcm63xx_epic",
--	.irq_ack	= bcm63xx_external_irq_clear,
--
--	.irq_mask	= bcm63xx_external_irq_mask,
--	.irq_unmask	= bcm63xx_external_irq_unmask,
--
--	.irq_set_type	= bcm63xx_external_irq_set_type,
--};
--
--static struct irqaction cpu_ip2_cascade_action = {
--	.handler	= no_action,
--	.name		= "cascade_ip2",
--	.flags		= IRQF_NO_THREAD,
--};
--
--#ifdef CONFIG_SMP
--static struct irqaction cpu_ip3_cascade_action = {
--	.handler	= no_action,
--	.name		= "cascade_ip3",
--	.flags		= IRQF_NO_THREAD,
--};
--#endif
--
--static struct irqaction cpu_ext_cascade_action = {
--	.handler	= no_action,
--	.name		= "cascade_extirq",
--	.flags		= IRQF_NO_THREAD,
--};
--
--static void bcm63xx_init_irq(void)
-+void __init arch_init_irq(void)
- {
--	int irq_bits;
--
--	irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
--	irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
--	irq_stat_addr[1] = bcm63xx_regset_address(RSET_PERF);
--	irq_mask_addr[1] = bcm63xx_regset_address(RSET_PERF);
-+	void __iomem *periph_bases[2];
-+	void __iomem *ext_intc_bases[2];
-+	int periph_irq_count, periph_width, ext_irq_count, ext_shift;
-+	int periph_irqs[2] = { 2, 3 };
-+	int ext_irqs[6];
-+
-+	periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+	periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+	ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+	ext_intc_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
- 
- 	switch (bcm63xx_get_cpu_id()) {
- 	case BCM3368_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
--		irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
--		irq_stat_addr[1] = 0;
--		irq_mask_addr[1] = 0;
--		irq_bits = 32;
--		ext_irq_count = 4;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
-+		periph_bases[0] += PERF_IRQMASK_3368_REG;
-+		periph_irq_count = 1;
-+		periph_width = 1;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_3368;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = BCM_3368_EXT_IRQ0;
-+		ext_irqs[1] = BCM_3368_EXT_IRQ1;
-+		ext_irqs[2] = BCM_3368_EXT_IRQ2;
-+		ext_irqs[3] = BCM_3368_EXT_IRQ3;
-+		ext_shift = 4;
- 		break;
- 	case BCM6328_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
--		irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
--		irq_stat_addr[1] += PERF_IRQSTAT_6328_REG(1);
--		irq_mask_addr[1] += PERF_IRQMASK_6328_REG(1);
--		irq_bits = 64;
--		ext_irq_count = 4;
--		is_ext_irq_cascaded = 1;
--		ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--		ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
-+		periph_bases[0] += PERF_IRQMASK_6328_REG(0);
-+		periph_bases[1] += PERF_IRQMASK_6328_REG(1);
-+		periph_irq_count = 2;
-+		periph_width = 2;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6328;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = BCM_6328_EXT_IRQ0;
-+		ext_irqs[1] = BCM_6328_EXT_IRQ1;
-+		ext_irqs[2] = BCM_6328_EXT_IRQ2;
-+		ext_irqs[3] = BCM_6328_EXT_IRQ3;
-+		ext_shift = 4;
- 		break;
- 	case BCM6338_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
--		irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
--		irq_stat_addr[1] = 0;
--		irq_mask_addr[1] = 0;
--		irq_bits = 32;
--		ext_irq_count = 4;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
-+		periph_bases[0] += PERF_IRQMASK_6338_REG;
-+		periph_irq_count = 1;
-+		periph_width = 1;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6338;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = 3;
-+		ext_irqs[1] = 4;
-+		ext_irqs[2] = 5;
-+		ext_irqs[3] = 6;
-+		ext_shift = 4;
- 		break;
- 	case BCM6345_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
--		irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
--		irq_stat_addr[1] = 0;
--		irq_mask_addr[1] = 0;
--		irq_bits = 32;
--		ext_irq_count = 4;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
-+		periph_bases[0] += PERF_IRQMASK_6345_REG;
-+		periph_irq_count = 1;
-+		periph_width = 1;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6345;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = 3;
-+		ext_irqs[1] = 4;
-+		ext_irqs[2] = 5;
-+		ext_irqs[3] = 6;
-+		ext_shift = 4;
- 		break;
- 	case BCM6348_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
--		irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
--		irq_stat_addr[1] = 0;
--		irq_mask_addr[1] = 0;
--		irq_bits = 32;
--		ext_irq_count = 4;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
-+		periph_bases[0] += PERF_IRQMASK_6348_REG;
-+		periph_irq_count = 1;
-+		periph_width = 1;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6348;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = 3;
-+		ext_irqs[1] = 4;
-+		ext_irqs[2] = 5;
-+		ext_irqs[3] = 6;
-+		ext_shift = 5;
- 		break;
- 	case BCM6358_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
--		irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
--		irq_stat_addr[1] += PERF_IRQSTAT_6358_REG(1);
--		irq_mask_addr[1] += PERF_IRQMASK_6358_REG(1);
--		irq_bits = 32;
--		ext_irq_count = 4;
--		is_ext_irq_cascaded = 1;
--		ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--		ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
-+		periph_bases[0] += PERF_IRQMASK_6358_REG(0);
-+		periph_bases[1] += PERF_IRQMASK_6358_REG(1);
-+		periph_irq_count = 2;
-+		periph_width = 1;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = BCM_6358_EXT_IRQ0;
-+		ext_irqs[1] = BCM_6358_EXT_IRQ1;
-+		ext_irqs[2] = BCM_6358_EXT_IRQ2;
-+		ext_irqs[3] = BCM_6358_EXT_IRQ3;
-+		ext_shift = 4;
- 		break;
- 	case BCM6362_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
--		irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
--		irq_stat_addr[1] += PERF_IRQSTAT_6362_REG(1);
--		irq_mask_addr[1] += PERF_IRQMASK_6362_REG(1);
--		irq_bits = 64;
--		ext_irq_count = 4;
--		is_ext_irq_cascaded = 1;
--		ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--		ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
-+		periph_bases[0] += PERF_IRQMASK_6362_REG(0);
-+		periph_bases[1] += PERF_IRQMASK_6362_REG(1);
-+		periph_irq_count = 2;
-+		periph_width = 2;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6362;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = BCM_6362_EXT_IRQ0;
-+		ext_irqs[1] = BCM_6362_EXT_IRQ1;
-+		ext_irqs[2] = BCM_6362_EXT_IRQ2;
-+		ext_irqs[3] = BCM_6362_EXT_IRQ3;
-+		ext_shift = 4;
- 		break;
- 	case BCM6368_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
--		irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
--		irq_stat_addr[1] += PERF_IRQSTAT_6368_REG(1);
--		irq_mask_addr[1] += PERF_IRQMASK_6368_REG(1);
--		irq_bits = 64;
-+		periph_bases[0] += PERF_IRQMASK_6368_REG(0);
-+		periph_bases[1] += PERF_IRQMASK_6368_REG(1);
-+		periph_irq_count = 2;
-+		periph_width = 2;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6368;
-+		ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6368;
- 		ext_irq_count = 6;
--		is_ext_irq_cascaded = 1;
--		ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--		ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
--		ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
-+		ext_irqs[0] = BCM_6368_EXT_IRQ0;
-+		ext_irqs[1] = BCM_6368_EXT_IRQ1;
-+		ext_irqs[2] = BCM_6368_EXT_IRQ2;
-+		ext_irqs[3] = BCM_6368_EXT_IRQ3;
-+		ext_irqs[4] = BCM_6368_EXT_IRQ4;
-+		ext_irqs[5] = BCM_6368_EXT_IRQ5;
-+		ext_shift = 4;
- 		break;
- 	default:
- 		BUG();
- 	}
- 
--	if (irq_bits == 32) {
--		dispatch_internal = __dispatch_internal_32;
--		internal_irq_mask = __internal_irq_mask_32;
--		internal_irq_unmask = __internal_irq_unmask_32;
--	} else {
--		dispatch_internal = __dispatch_internal_64;
--		internal_irq_mask = __internal_irq_mask_64;
--		internal_irq_unmask = __internal_irq_unmask_64;
--	}
--}
--
--void __init arch_init_irq(void)
--{
--	int i;
--
--	bcm63xx_init_irq();
- 	mips_cpu_irq_init();
--	for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i)
--		irq_set_chip_and_handler(i, &bcm63xx_internal_irq_chip,
--					 handle_level_irq);
--
--	for (i = IRQ_EXTERNAL_BASE; i < IRQ_EXTERNAL_BASE + ext_irq_count; ++i)
--		irq_set_chip_and_handler(i, &bcm63xx_external_irq_chip,
--					 handle_edge_irq);
--
--	if (!is_ext_irq_cascaded) {
--		for (i = 3; i < 3 + ext_irq_count; ++i)
--			setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action);
--	}
--
--	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
--#ifdef CONFIG_SMP
--	if (is_ext_irq_cascaded) {
--		setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
--		bcm63xx_internal_irq_chip.irq_set_affinity =
--			bcm63xx_internal_set_affinity;
--
--		cpumask_clear(irq_default_affinity);
--		cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
--	}
--#endif
-+	bcm6345_periph_intc_init(periph_irq_count, periph_irqs, periph_bases,
-+				 periph_width);
-+	bcm6345_ext_intc_init(4, ext_irqs, ext_intc_bases[0], ext_shift);
-+	if (ext_irq_count > 4)
-+		bcm6345_ext_intc_init(2, &ext_irqs[4], ext_intc_bases[1],
-+				      ext_shift);
- }
diff --git a/target/linux/bcm63xx/patches-5.4/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch b/target/linux/bcm63xx/patches-5.4/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch
deleted file mode 100644
index e911f0ead5..0000000000
--- a/target/linux/bcm63xx/patches-5.4/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 4fd286c3e5a5bebab0391cf1937695b3ed6721a3 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 20:20:30 +0100
-Subject: [PATCH 4/5] MIPS: BCM63XX: wire up BCM6358's external interrupts 4
- and 5
-
-Due to the external interrupts being non consecutive, the previous
-implementation did not support them. Now that we treat both registers
-as separate irq controllers, there is no such limitation anymore and
-we can expose them for drivers to use.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c                           |    5 ++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  |    2 ++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    1 +
- 3 files changed, 7 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -108,11 +108,14 @@ void __init arch_init_irq(void)
- 		periph_width = 1;
- 
- 		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
--		ext_irq_count = 4;
-+		ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6358;
-+		ext_irq_count = 6;
- 		ext_irqs[0] = BCM_6358_EXT_IRQ0;
- 		ext_irqs[1] = BCM_6358_EXT_IRQ1;
- 		ext_irqs[2] = BCM_6358_EXT_IRQ2;
- 		ext_irqs[3] = BCM_6358_EXT_IRQ3;
-+		ext_irqs[4] = BCM_6358_EXT_IRQ4;
-+		ext_irqs[5] = BCM_6358_EXT_IRQ5;
- 		ext_shift = 4;
- 		break;
- 	case BCM6362_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -896,6 +896,8 @@ enum bcm63xx_irq {
- #define BCM_6358_EXT_IRQ1		(IRQ_INTERNAL_BASE + 26)
- #define BCM_6358_EXT_IRQ2		(IRQ_INTERNAL_BASE + 27)
- #define BCM_6358_EXT_IRQ3		(IRQ_INTERNAL_BASE + 28)
-+#define BCM_6358_EXT_IRQ4		(IRQ_INTERNAL_BASE + 20)
-+#define BCM_6358_EXT_IRQ5		(IRQ_INTERNAL_BASE + 21)
- 
- /*
-  * 6362 irqs
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -244,6 +244,7 @@
- #define PERF_EXTIRQ_CFG_REG_6362	0x18
- #define PERF_EXTIRQ_CFG_REG_6368	0x18
- 
-+#define PERF_EXTIRQ_CFG_REG2_6358	0x1c
- #define PERF_EXTIRQ_CFG_REG2_6368	0x1c
- 
- /* for 6348 only */
diff --git a/target/linux/bcm63xx/patches-5.4/324-irqchip-bcm6345-periph-fix-block-uninitialized.patch b/target/linux/bcm63xx/patches-5.4/324-irqchip-bcm6345-periph-fix-block-uninitialized.patch
deleted file mode 100644
index 60a645e1bf..0000000000
--- a/target/linux/bcm63xx/patches-5.4/324-irqchip-bcm6345-periph-fix-block-uninitialized.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/irqchip/irq-bcm6345-periph.c
-+++ b/drivers/irqchip/irq-bcm6345-periph.c
-@@ -52,7 +52,7 @@ static void bcm6345_periph_irq_handle(st
- {
- 	struct intc_data *data = irq_desc_get_handler_data(desc);
- 	struct irq_chip *chip = irq_desc_get_chip(desc);
--	struct intc_block *block;
-+	struct intc_block *block = NULL;
- 	unsigned int irq = irq_desc_get_irq(desc);
- 	unsigned int idx;
- 
-@@ -62,7 +62,7 @@ static void bcm6345_periph_irq_handle(st
- 		if (irq == data->block[idx].parent_irq)
- 			block = &data->block[idx];
- 
--	for (idx = 0; idx < data->num_words; idx++) {
-+	for (idx = 0; block && idx < data->num_words; idx++) {
- 		int base = idx * IRQS_PER_WORD;
- 		unsigned long pending;
- 		int hw_irq;
diff --git a/target/linux/bcm63xx/patches-5.4/325-irqchip-bcm6345-external-fix-base-uninitialized.patch b/target/linux/bcm63xx/patches-5.4/325-irqchip-bcm6345-external-fix-base-uninitialized.patch
deleted file mode 100644
index 45b5118a4a..0000000000
--- a/target/linux/bcm63xx/patches-5.4/325-irqchip-bcm6345-external-fix-base-uninitialized.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/irqchip/irq-bcm6345-ext.c
-+++ b/drivers/irqchip/irq-bcm6345-ext.c
-@@ -271,21 +271,19 @@ static int __init bcm6345_ext_intc_of_in
- 
- 	for (i = 0; i < num_irqs; i++) {
- 		irqs[i] = irq_of_parse_and_map(node, i);
--		if (!irqs[i]) {
--			ret = -ENOMEM;
--			goto out_unmap;
--		}
-+		if (!irqs[i])
-+			return -ENOMEM;
- 	}
- 
- 	base = of_iomap(node, 0);
- 	if (!base)
--		goto out_unmap;
-+		return -ENXIO;
- 
- 	ret = __bcm6345_ext_intc_init(node, num_irqs, irqs, base, shift,
- 				      toggle_clear_on_ack);
- 	if (!ret)
- 		return 0;
--out_unmap:
-+
- 	iounmap(base);
- 
- 	for (i = 0; i < num_irqs; i++)
diff --git a/target/linux/bcm63xx/patches-5.4/326-irqchip-bcm6345-report-eff-affinity.patch b/target/linux/bcm63xx/patches-5.4/326-irqchip-bcm6345-report-eff-affinity.patch
deleted file mode 100644
index f25488575c..0000000000
--- a/target/linux/bcm63xx/patches-5.4/326-irqchip-bcm6345-report-eff-affinity.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/irqchip/irq-bcm6345-periph.c
-+++ b/drivers/irqchip/irq-bcm6345-periph.c
-@@ -186,6 +186,8 @@ static int bcm6345_periph_set_affinity(s
- 	}
- 	raw_spin_unlock_irqrestore(&priv->lock, flags);
- 
-+	irq_data_update_effective_affinity(data, cpumask_of(cpu));
-+
- 	return 0;
- }
- #endif
-@@ -197,6 +199,8 @@ static int bcm6345_periph_map(struct irq
- 
- 	irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
- 
-+	irqd_set_single_target(irq_desc_get_irq_data(irq_to_desc(irq)));
-+
- 	return 0;
- }
- 
diff --git a/target/linux/bcm63xx/patches-5.4/327-irqchip-bcm6345-periph-clear-on-init.patch b/target/linux/bcm63xx/patches-5.4/327-irqchip-bcm6345-periph-clear-on-init.patch
deleted file mode 100644
index a878b34b21..0000000000
--- a/target/linux/bcm63xx/patches-5.4/327-irqchip-bcm6345-periph-clear-on-init.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/drivers/irqchip/irq-bcm6345-periph.c
-+++ b/drivers/irqchip/irq-bcm6345-periph.c
-@@ -240,6 +240,9 @@ static int __init __bcm6345_periph_intc_
- 			/* route all interrupts to line 0 by default */
- 			if (i == 0)
- 				block->mask_cache[w] = 0xffffffff;
-+
-+			/* mask all interrupts */
-+			__raw_writel(0, block->en_reg[w]);
- 		}
- 
- 		irq_set_handler_data(block->parent_irq, data);
diff --git a/target/linux/bcm63xx/patches-5.4/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch b/target/linux/bcm63xx/patches-5.4/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch
deleted file mode 100644
index 07d3f9dbc8..0000000000
--- a/target/linux/bcm63xx/patches-5.4/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From c50acd37b425a8a907a6f7f93aa2e658256e79ce Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:08:36 +0100
-Subject: [PATCH 40/53] MIPS: BCM63XX: add a new cpu variant helper
-
----
- arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 ++++++++++++++++++
- 2 files changed, 28 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -27,6 +27,8 @@ EXPORT_SYMBOL(bcm63xx_irqs);
- u16 bcm63xx_cpu_id __read_mostly;
- EXPORT_SYMBOL(bcm63xx_cpu_id);
- 
-+static u32 bcm63xx_cpu_variant __read_mostly;
-+
- static u8 bcm63xx_cpu_rev;
- static unsigned int bcm63xx_cpu_freq;
- static unsigned int bcm63xx_memory_size;
-@@ -99,6 +101,13 @@ static const int bcm6368_irqs[] = {
- 
- };
- 
-+u32 bcm63xx_get_cpu_variant(void)
-+{
-+	return bcm63xx_cpu_variant;
-+}
-+
-+EXPORT_SYMBOL(bcm63xx_get_cpu_variant);
-+
- u8 bcm63xx_get_cpu_rev(void)
- {
- 	return bcm63xx_cpu_rev;
-@@ -333,6 +342,7 @@ void __init bcm63xx_cpu_init(void)
- 	/* read out CPU type */
- 	tmp = bcm_readl(chipid_reg);
- 	bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-+	bcm63xx_cpu_variant = bcm63xx_cpu_id;
- 	bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
- 
- 	switch (bcm63xx_cpu_id) {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -20,6 +20,7 @@
- #define BCM6368_CPU_ID		0x6368
- 
- void __init bcm63xx_cpu_init(void);
-+u32 bcm63xx_get_cpu_variant(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
- 
-@@ -83,6 +84,23 @@ static inline u16 __pure bcm63xx_get_cpu
- #define BCMCPU_IS_6362()	(bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
- #define BCMCPU_IS_6368()	(bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
- 
-+#define BCMCPU_VARIANT_IS_3368() \
-+	(bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6328() \
-+	(bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6338() \
-+	(bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6345() \
-+	(bcm63xx_get_cpu_variant() == BCM6345_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6348() \
-+	(bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6358() \
-+	(bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6362() \
-+	(bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6368() \
-+	(bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
-+
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
-  * address of these sets do change.
diff --git a/target/linux/bcm63xx/patches-5.4/331-MIPS-BCM63XX-define-variant-id-field.patch b/target/linux/bcm63xx/patches-5.4/331-MIPS-BCM63XX-define-variant-id-field.patch
deleted file mode 100644
index 57af836858..0000000000
--- a/target/linux/bcm63xx/patches-5.4/331-MIPS-BCM63XX-define-variant-id-field.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 3bd8e2535265f06f79ed9c0ad788405441e091dc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:22:41 +0100
-Subject: [PATCH 21/45] MIPS: BCM63XX: define variant id field
-
-Some SoC have a variant id field in the chip id register.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -10,6 +10,8 @@
- #define PERF_REV_REG			0x0
- #define REV_CHIPID_SHIFT		16
- #define REV_CHIPID_MASK			(0xffff << REV_CHIPID_SHIFT)
-+#define REV_VARID_SHIFT			12
-+#define REV_VARID_MASK			(0xf << REV_VARID_SHIFT)
- #define REV_REVID_SHIFT			0
- #define REV_REVID_MASK			(0xff << REV_REVID_SHIFT)
- 
diff --git a/target/linux/bcm63xx/patches-5.4/332-MIPS-BCM63XX-detect-BCM6328-variants.patch b/target/linux/bcm63xx/patches-5.4/332-MIPS-BCM63XX-detect-BCM6328-variants.patch
deleted file mode 100644
index a05a4b3e24..0000000000
--- a/target/linux/bcm63xx/patches-5.4/332-MIPS-BCM63XX-detect-BCM6328-variants.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From d59120f23279ef62a48d9f94847254b061d0a8b6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:30:59 +0100
-Subject: [PATCH 22/45] MIPS: BCM63XX: detect BCM6328 variants
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h |  8 ++++++--
- 2 files changed, 16 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -305,6 +305,7 @@ void __init bcm63xx_cpu_init(void)
- 	unsigned int tmp;
- 	unsigned int cpu = smp_processor_id();
- 	u32 chipid_reg;
-+	u8 __maybe_unused varid = 0;
- 
- 	/* soc registers location depends on cpu type */
- 	chipid_reg = 0;
-@@ -344,6 +345,7 @@ void __init bcm63xx_cpu_init(void)
- 	bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
- 	bcm63xx_cpu_variant = bcm63xx_cpu_id;
- 	bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
-+	varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
- 
- 	switch (bcm63xx_cpu_id) {
- 	case BCM3368_CPU_ID:
-@@ -353,6 +355,14 @@ void __init bcm63xx_cpu_init(void)
- 	case BCM6328_CPU_ID:
- 		bcm63xx_regs_base = bcm6328_regs_base;
- 		bcm63xx_irqs = bcm6328_irqs;
-+
-+		if (varid == 1)
-+			bcm63xx_cpu_variant = BCM63281_CPU_ID;
-+		else if (varid == 3)
-+			bcm63xx_cpu_variant = BCM63283_CPU_ID;
-+		else
-+			pr_warn("unknown BCM6328 variant: %x\n", varid);
-+
- 		break;
- 	case BCM6338_CPU_ID:
- 		bcm63xx_regs_base = bcm6338_regs_base;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -12,6 +12,8 @@
-  */
- #define BCM3368_CPU_ID		0x3368
- #define BCM6328_CPU_ID		0x6328
-+#define BCM63281_CPU_ID		0x63281
-+#define BCM63283_CPU_ID		0x63283
- #define BCM6338_CPU_ID		0x6338
- #define BCM6345_CPU_ID		0x6345
- #define BCM6348_CPU_ID		0x6348
-@@ -86,8 +88,10 @@ static inline u16 __pure bcm63xx_get_cpu
- 
- #define BCMCPU_VARIANT_IS_3368() \
- 	(bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
--#define BCMCPU_VARIANT_IS_6328() \
--	(bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63281() \
-+	(bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63283() \
-+	(bcm63xx_get_cpu_variant() == BCM63283_CPU_ID)
- #define BCMCPU_VARIANT_IS_6338() \
- 	(bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
- #define BCMCPU_VARIANT_IS_6345() \
diff --git a/target/linux/bcm63xx/patches-5.4/333-MIPS-BCM63XX-detect-BCM6362-variants.patch b/target/linux/bcm63xx/patches-5.4/333-MIPS-BCM63XX-detect-BCM6362-variants.patch
deleted file mode 100644
index 2efbf36d32..0000000000
--- a/target/linux/bcm63xx/patches-5.4/333-MIPS-BCM63XX-detect-BCM6362-variants.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 04458c3db8eb79da21ecde40ab36a1dde52bef06 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:33:28 +0100
-Subject: [PATCH 23/45] MIPS: BCM63XX: detect BCM6362 variants
-
----
- arch/mips/bcm63xx/cpu.c                          | 8 ++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
- 2 files changed, 11 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -383,6 +383,14 @@ void __init bcm63xx_cpu_init(void)
- 	case BCM6362_CPU_ID:
- 		bcm63xx_regs_base = bcm6362_regs_base;
- 		bcm63xx_irqs = bcm6362_irqs;
-+
-+		if (varid == 1)
-+			bcm63xx_cpu_variant = BCM6362_CPU_ID;
-+		else if (varid == 2)
-+			bcm63xx_cpu_variant = BCM6361_CPU_ID;
-+		else
-+			pr_warn("unknown BCM6362 variant: %x\n", varid);
-+
- 		break;
- 	case BCM6368_CPU_ID:
- 		bcm63xx_regs_base = bcm6368_regs_base;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -18,6 +18,7 @@
- #define BCM6345_CPU_ID		0x6345
- #define BCM6348_CPU_ID		0x6348
- #define BCM6358_CPU_ID		0x6358
-+#define BCM6361_CPU_ID		0x6361
- #define BCM6362_CPU_ID		0x6362
- #define BCM6368_CPU_ID		0x6368
- 
-@@ -100,6 +101,8 @@ static inline u16 __pure bcm63xx_get_cpu
- 	(bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
- #define BCMCPU_VARIANT_IS_6358() \
- 	(bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6361() \
-+	(bcm63xx_get_cpu_variant() == BCM6361_CPU_ID)
- #define BCMCPU_VARIANT_IS_6362() \
- 	(bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
- #define BCMCPU_VARIANT_IS_6368() \
diff --git a/target/linux/bcm63xx/patches-5.4/334-MIPS-BCM63XX-detect-BCM6368-variants.patch b/target/linux/bcm63xx/patches-5.4/334-MIPS-BCM63XX-detect-BCM6368-variants.patch
deleted file mode 100644
index 64bcd8f19b..0000000000
--- a/target/linux/bcm63xx/patches-5.4/334-MIPS-BCM63XX-detect-BCM6368-variants.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 825cc67e56b5e624a05f6850a86d91508b786848 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:36:56 +0100
-Subject: [PATCH 24/44] MIPS: BCM63XX: detect BCM6368 variants
-
-The DSL-less BCM6368 variant BCM6367 uses a different chip id. Apart
-from missing DSL, there is no difference to BCM6368, so treat it such.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c                          | 4 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
- 2 files changed, 7 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -393,8 +393,12 @@ void __init bcm63xx_cpu_init(void)
- 
- 		break;
- 	case BCM6368_CPU_ID:
-+	case BCM6369_CPU_ID:
- 		bcm63xx_regs_base = bcm6368_regs_base;
- 		bcm63xx_irqs = bcm6368_irqs;
-+
-+		/* BCM6369 is a BCM6368 without xDSL, so treat it the same */
-+		bcm63xx_cpu_id = BCM6368_CPU_ID;
- 		break;
- 	default:
- 		panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -21,6 +21,7 @@
- #define BCM6361_CPU_ID		0x6361
- #define BCM6362_CPU_ID		0x6362
- #define BCM6368_CPU_ID		0x6368
-+#define BCM6369_CPU_ID		0x6369
- 
- void __init bcm63xx_cpu_init(void);
- u32 bcm63xx_get_cpu_variant(void);
-@@ -107,6 +108,8 @@ static inline u16 __pure bcm63xx_get_cpu
- 	(bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
- #define BCMCPU_VARIANT_IS_6368() \
- 	(bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6369() \
-+	(bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
- 
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
diff --git a/target/linux/bcm63xx/patches-5.4/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch b/target/linux/bcm63xx/patches-5.4/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch
deleted file mode 100644
index 54900d72ab..0000000000
--- a/target/linux/bcm63xx/patches-5.4/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From f67f8134b4537c8bbafe7e1975edfe808b813997 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:05:54 +0100
-Subject: [PATCH 45/53] MIPS: BCM63XX: fix PCIe memory window size
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -42,7 +42,7 @@
- 					BCM_CB_MEM_SIZE - 1)
- 
- #define BCM_PCIE_MEM_BASE_PA		0x10f00000
--#define BCM_PCIE_MEM_SIZE		(16 * 1024 * 1024)
-+#define BCM_PCIE_MEM_SIZE		(1 * 1024 * 1024)
- #define BCM_PCIE_MEM_END_PA		(BCM_PCIE_MEM_BASE_PA +		\
- 					BCM_PCIE_MEM_SIZE - 1)
- 
diff --git a/target/linux/bcm63xx/patches-5.4/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch b/target/linux/bcm63xx/patches-5.4/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch
deleted file mode 100644
index 05142a8e46..0000000000
--- a/target/linux/bcm63xx/patches-5.4/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From aa05464973bc176478af462ca7c53a9239c651d4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:13:06 +0100
-Subject: [PATCH 46/53] MIPS: BCM63XX: dynamically set the pcie memory windows
-
-Different SoCs use different memory windows (and sizes), so don't
-hardcode it.
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h |  8 ++++----
- arch/mips/pci/pci-bcm63xx.c                     | 15 ++++++++++-----
- 2 files changed, 14 insertions(+), 9 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -41,10 +41,10 @@
- #define BCM_CB_MEM_END_PA		(BCM_CB_MEM_BASE_PA +		\
- 					BCM_CB_MEM_SIZE - 1)
- 
--#define BCM_PCIE_MEM_BASE_PA		0x10f00000
--#define BCM_PCIE_MEM_SIZE		(1 * 1024 * 1024)
--#define BCM_PCIE_MEM_END_PA		(BCM_PCIE_MEM_BASE_PA +		\
--					BCM_PCIE_MEM_SIZE - 1)
-+#define BCM_PCIE_MEM_BASE_PA_6328	0x10f00000
-+#define BCM_PCIE_MEM_SIZE_6328		(1 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_6328	(BCM_PCIE_MEM_BASE_PA_6328 +	\
-+					BCM_PCIE_MEM_SIZE_6328 - 1)
- 
- /*
-  * Internal registers are accessed through KSEG3
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -77,8 +77,8 @@ struct pci_controller bcm63xx_cb_control
- 
- static struct resource bcm_pcie_mem_resource = {
- 	.name	= "bcm63xx PCIe memory space",
--	.start	= BCM_PCIE_MEM_BASE_PA,
--	.end	= BCM_PCIE_MEM_END_PA,
-+	.start	= 0,
-+	.end	= 0,
- 	.flags	= IORESOURCE_MEM,
- };
- 
-@@ -195,12 +195,12 @@ static int __init bcm63xx_register_pcie(
- 	bcm_pcie_writel(val, PCIE_CONFIG2_REG);
- 
- 	/* set bar0 to little endian */
--	val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
--	val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
-+	val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
-+	val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
- 	val |= BASEMASK_REMAP_EN;
- 	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
- 
--	val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
-+	val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
- 	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
- 
- 	register_pci_controller(&bcm63xx_pcie_controller);
-@@ -334,6 +334,11 @@ static int __init bcm63xx_pci_init(void)
- 	if (!bcm63xx_pci_enabled)
- 		return -ENODEV;
- 
-+	if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+		bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-+		bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-+	}
-+
- 	switch (bcm63xx_get_cpu_id()) {
- 	case BCM6328_CPU_ID:
- 	case BCM6362_CPU_ID:
diff --git a/target/linux/bcm63xx/patches-5.4/337-MIPS-BCM63XX-widen-cpuid-field.patch b/target/linux/bcm63xx/patches-5.4/337-MIPS-BCM63XX-widen-cpuid-field.patch
deleted file mode 100644
index c38b431125..0000000000
--- a/target/linux/bcm63xx/patches-5.4/337-MIPS-BCM63XX-widen-cpuid-field.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From f1477f6e3551fd6beecfee5368fed1325dcd421f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:54:51 +0100
-Subject: [PATCH 47/53] MIPS: BCM63XX: widen cpuid field
-
----
- arch/mips/bcm63xx/cpu.c                          | 2 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 8 ++++----
- 2 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -24,7 +24,7 @@ EXPORT_SYMBOL(bcm63xx_regs_base);
- const int *bcm63xx_irqs;
- EXPORT_SYMBOL(bcm63xx_irqs);
- 
--u16 bcm63xx_cpu_id __read_mostly;
-+u32 bcm63xx_cpu_id __read_mostly;
- EXPORT_SYMBOL(bcm63xx_cpu_id);
- 
- static u32 bcm63xx_cpu_variant __read_mostly;
-@@ -127,7 +127,7 @@ unsigned int bcm63xx_get_memory_size(voi
- 
- static unsigned int detect_cpu_clock(void)
- {
--	u16 cpu_id = bcm63xx_get_cpu_id();
-+	u32 cpu_id = bcm63xx_get_cpu_id();
- 
- 	switch (cpu_id) {
- 	case BCM3368_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -28,7 +28,7 @@ u32 bcm63xx_get_cpu_variant(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
- 
--static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
-+static inline u32 __pure __bcm63xx_get_cpu_id(const u32 cpu_id)
- {
- 	switch (cpu_id) {
- #ifdef CONFIG_BCM63XX_CPU_3368
-@@ -70,11 +70,11 @@ static inline u16 __pure __bcm63xx_get_c
- 	return cpu_id;
- }
- 
--extern u16 bcm63xx_cpu_id;
-+extern u32 bcm63xx_cpu_id;
- 
--static inline u16 __pure bcm63xx_get_cpu_id(void)
-+static inline u32 __pure bcm63xx_get_cpu_id(void)
- {
--	const u16 cpu_id = bcm63xx_cpu_id;
-+	const u32 cpu_id = bcm63xx_cpu_id;
- 
- 	return __bcm63xx_get_cpu_id(cpu_id);
- }
diff --git a/target/linux/bcm63xx/patches-5.4/338-MIPS-BCM63XX-increase-number-of-IRQs.patch b/target/linux/bcm63xx/patches-5.4/338-MIPS-BCM63XX-increase-number-of-IRQs.patch
deleted file mode 100644
index 1809a3cac4..0000000000
--- a/target/linux/bcm63xx/patches-5.4/338-MIPS-BCM63XX-increase-number-of-IRQs.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 6f5658c845cf1f79213b1d20423a04967259fdaa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:46:26 +0100
-Subject: [PATCH 48/53] MIPS: BCM63XX: increase number of IRQs
-
-Newer SoCs have 128 bit wide irq registers, thus 128 available internal
-interupts.
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h | 4 +++-
- arch/mips/include/asm/mach-bcm63xx/irq.h         | 2 +-
- 2 files changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
-@@ -2,10 +2,12 @@
- #ifndef BCM63XX_IRQ_H_
- #define BCM63XX_IRQ_H_
- 
-+#include <irq.h>
- #include <bcm63xx_cpu.h>
- 
- #define IRQ_INTERNAL_BASE		8
--#define IRQ_EXTERNAL_BASE		100
-+#define NR_INTERNAL_IRQS		128
-+#define IRQ_EXTERNAL_BASE		(IRQ_INTERNAL_BASE + NR_INTERNAL_IRQS)
- #define IRQ_EXT_0			(IRQ_EXTERNAL_BASE + 0)
- #define IRQ_EXT_1			(IRQ_EXTERNAL_BASE + 1)
- #define IRQ_EXT_2			(IRQ_EXTERNAL_BASE + 2)
---- a/arch/mips/include/asm/mach-bcm63xx/irq.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/irq.h
-@@ -2,7 +2,7 @@
- #ifndef __ASM_MACH_BCM63XX_IRQ_H
- #define __ASM_MACH_BCM63XX_IRQ_H
- 
--#define NR_IRQS 128
-+#define NR_IRQS 256
- #define MIPS_CPU_IRQ_BASE 0
- 
- #endif
diff --git a/target/linux/bcm63xx/patches-5.4/339-MIPS-BCM63XX-add-support-for-BCM63268.patch b/target/linux/bcm63xx/patches-5.4/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
deleted file mode 100644
index ed70482bb0..0000000000
--- a/target/linux/bcm63xx/patches-5.4/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
+++ /dev/null
@@ -1,741 +0,0 @@
-From 98f63141190ac02c58b78d58f771bd263c61d756 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 17:14:17 +0100
-Subject: [PATCH 48/56] MIPS: BCM63XX: add support for BCM63268
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig                         |   5 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
- arch/mips/bcm63xx/clk.c                           |  25 ++++-
- arch/mips/bcm63xx/cpu.c                           |  59 +++++++++-
- arch/mips/bcm63xx/dev-flash.c                     |   6 +
- arch/mips/bcm63xx/dev-spi.c                       |   4 +-
- arch/mips/bcm63xx/irq.c                           |  20 +++-
- arch/mips/bcm63xx/reset.c                         |  21 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 130 ++++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h |   2 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  79 +++++++++++++
- arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
- 12 files changed, 342 insertions(+), 12 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -61,6 +61,11 @@ config BCM63XX_CPU_6368
- 	select HAVE_PCI
- 	select BCM63XX_OHCI
- 	select BCM63XX_EHCI
-+
-+config BCM63XX_CPU_63268
-+	bool "support 63268 CPU"
-+	select SYS_HAS_CPU_BMIPS4350
-+	select HAVE_PCI
- endmenu
- 
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -694,7 +694,7 @@ void __init board_prom_init(void)
- 	/* read base address of boot chip select (0)
- 	 * 6328/6362 do not have MPI but boot from a fixed address
- 	 */
--	if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
- 		val = 0x18000000;
- 	} else {
- 		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -169,6 +169,8 @@ static void enetsw_set(struct clk *clk,
- 			clk_disable_unlocked(&clk_swpkt_sar);
- 		}
- 		bcm_hwclock_set(CKCTL_6368_ROBOSW_EN, enable);
-+	} else if (BCMCPU_IS_63268()) {
-+		bcm_hwclock_set(CKCTL_63268_ROBOSW_EN, enable);
- 	} else {
- 		return;
- 	}
-@@ -214,6 +216,8 @@ static void usbh_set(struct clk *clk, in
- 		bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
- 	else if (BCMCPU_IS_6368())
- 		bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-+	else if (BCMCPU_IS_63268())
-+		bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
- 	else
- 		return;
- 
-@@ -236,6 +240,8 @@ static void usbd_set(struct clk *clk, in
- 		bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
- 	else if (BCMCPU_IS_6368())
- 		bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
-+	else if (BCMCPU_IS_63268())
-+		bcm_hwclock_set(CKCTL_63268_USBD_EN, enable);
- 	else
- 		return;
- 
-@@ -262,9 +268,13 @@ static void spi_set(struct clk *clk, int
- 		mask = CKCTL_6358_SPI_EN;
- 	else if (BCMCPU_IS_6362())
- 		mask = CKCTL_6362_SPI_EN;
--	else
--		/* BCMCPU_IS_6368 */
-+	else if (BCMCPU_IS_6368())
- 		mask = CKCTL_6368_SPI_EN;
-+	else if (BCMCPU_IS_63268())
-+		mask = CKCTL_63268_SPI_EN;
-+	else
-+		return;
-+
- 	bcm_hwclock_set(mask, enable);
- }
- 
-@@ -283,6 +293,8 @@ static void hsspi_set(struct clk *clk, i
- 		mask = CKCTL_6328_HSSPI_EN;
- 	else if (BCMCPU_IS_6362())
- 		mask = CKCTL_6362_HSSPI_EN;
-+	else if (BCMCPU_IS_63268())
-+		mask = CKCTL_63268_HSSPI_EN;
- 	else
- 		return;
- 
-@@ -352,6 +364,8 @@ static void pcie_set(struct clk *clk, in
- 		bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
- 	else if (BCMCPU_IS_6362())
- 		bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
-+	else if (BCMCPU_IS_63268())
-+		bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
- }
- 
- static struct clk clk_pcie = {
-@@ -548,6 +562,21 @@ static struct clk_lookup bcm6368_clks[]
- 	CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
- };
- 
-+static struct clk_lookup bcm63268_clks[] = {
-+	/* fixed rate clocks */
-+	CLKDEV_INIT(NULL, "periph", &clk_periph),
-+	CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+	CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+	CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+	/* gated clocks */
-+	CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-+	CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+	CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+	CLKDEV_INIT(NULL, "spi", &clk_spi),
-+	CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
-+	CLKDEV_INIT(NULL, "pcie", &clk_pcie),
-+};
-+
- #define HSSPI_PLL_HZ_6328	133333333
- #define HSSPI_PLL_HZ_6362	400000000
- 
-@@ -580,6 +609,10 @@ static int __init bcm63xx_clk_init(void)
- 	case BCM6368_CPU_ID:
- 		clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks));
- 		break;
-+	case BCM63268_CPU_ID:
-+		clk_hsspi_pll.rate = HSSPI_PLL_HZ_6362;
-+		clkdev_add_table(bcm63268_clks, ARRAY_SIZE(bcm63268_clks));
-+		break;
- 	}
- 
- 	return 0;
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -101,6 +101,15 @@ static const int bcm6368_irqs[] = {
- 
- };
- 
-+static const unsigned long bcm63268_regs_base[] = {
-+	__GEN_CPU_REGS_TABLE(63268)
-+};
-+
-+static const int bcm63268_irqs[] = {
-+	__GEN_CPU_IRQ_TABLE(63268)
-+
-+};
-+
- u32 bcm63xx_get_cpu_variant(void)
- {
- 	return bcm63xx_cpu_variant;
-@@ -253,6 +262,27 @@ static unsigned int detect_cpu_clock(voi
- 
- 		return (((64 * 1000000) / p1) * p2 * ndiv) / m1;
- 	}
-+	case BCM63268_CPU_ID:
-+	{
-+		unsigned int tmp, mips_pll_fcvo;
-+
-+		tmp = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+		mips_pll_fcvo = (tmp & STRAPBUS_63268_FCVO_MASK) >>
-+				STRAPBUS_63268_FCVO_SHIFT;
-+		switch (mips_pll_fcvo) {
-+		case 0x3:
-+		case 0xe:
-+			return 320000000;
-+		case 0xa:
-+			return 333000000;
-+		case 0x2:
-+		case 0xb:
-+		case 0xf:
-+			return 400000000;
-+		default:
-+			return 0;
-+		}
-+	}
- 
- 	default:
- 		panic("Failed to detect clock for CPU with id=%04X\n", cpu_id);
-@@ -267,7 +297,7 @@ static unsigned int detect_memory_size(v
- 	unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
- 	u32 val;
- 
--	if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
-+	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
- 		return bcm_ddr_readl(DDR_CSEND_REG) << 24;
- 
- 	if (BCMCPU_IS_6345()) {
-@@ -305,6 +335,7 @@ void __init bcm63xx_cpu_init(void)
- 	unsigned int tmp;
- 	unsigned int cpu = smp_processor_id();
- 	u32 chipid_reg;
-+	bool long_chipid = false;
- 	u8 __maybe_unused varid = 0;
- 
- 	/* soc registers location depends on cpu type */
-@@ -326,6 +357,9 @@ void __init bcm63xx_cpu_init(void)
- 		case 0x10:
- 			chipid_reg = BCM_6345_PERF_BASE;
- 			break;
-+		case 0x80:
-+			long_chipid = true;
-+			/* fall-through */
- 		default:
- 			chipid_reg = BCM_6368_PERF_BASE;
- 			break;
-@@ -333,6 +367,7 @@ void __init bcm63xx_cpu_init(void)
- 		break;
- 	}
- 
-+
- 	/*
- 	 * really early to panic, but delaying panic would not help since we
- 	 * will never get any working console
-@@ -342,10 +377,17 @@ void __init bcm63xx_cpu_init(void)
- 
- 	/* read out CPU type */
- 	tmp = bcm_readl(chipid_reg);
--	bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
--	bcm63xx_cpu_variant = bcm63xx_cpu_id;
-+
-+	if (long_chipid) {
-+		bcm63xx_cpu_id = tmp & REV_LONG_CHIPID_MASK;
-+		bcm63xx_cpu_id >>= REV_LONG_CHIPID_SHIFT;
-+	} else {
-+		bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-+		varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-+	}
-+
- 	bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
--	varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-+	bcm63xx_cpu_variant = bcm63xx_cpu_id;
- 
- 	switch (bcm63xx_cpu_id) {
- 	case BCM3368_CPU_ID:
-@@ -400,6 +442,16 @@ void __init bcm63xx_cpu_init(void)
- 		/* BCM6369 is a BCM6368 without xDSL, so treat it the same */
- 		bcm63xx_cpu_id = BCM6368_CPU_ID;
- 		break;
-+	case BCM63167_CPU_ID:
-+	case BCM63168_CPU_ID:
-+	case BCM63169_CPU_ID:
-+	case BCM63268_CPU_ID:
-+	case BCM63269_CPU_ID:
-+		bcm63xx_regs_base = bcm63268_regs_base;
-+		bcm63xx_irqs = bcm63268_irqs;
-+
-+		bcm63xx_cpu_id = BCM63268_CPU_ID;
-+		break;
- 	default:
- 		panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
- 		break;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -84,6 +84,12 @@ static int __init bcm63xx_detect_flash_t
- 			return BCM63XX_FLASH_TYPE_SERIAL;
- 		else
- 			return BCM63XX_FLASH_TYPE_NAND;
-+	case BCM63268_CPU_ID:
-+		val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+		if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
-+			return BCM63XX_FLASH_TYPE_SERIAL;
-+		else
-+			return BCM63XX_FLASH_TYPE_NAND;
- 	case BCM6368_CPU_ID:
- 		val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
- 		switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -51,7 +51,7 @@ int __init bcm63xx_spi_register(void)
- 	}
- 
- 	if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
--		BCMCPU_IS_6368()) {
-+		BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
- 		bcm63xx_spi_device.name = "bcm6358-spi",
- 		spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
- 	}
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -149,6 +149,20 @@ void __init arch_init_irq(void)
- 		ext_irqs[5] = BCM_6368_EXT_IRQ5;
- 		ext_shift = 4;
- 		break;
-+	case BCM63268_CPU_ID:
-+		periph_bases[0] += PERF_IRQMASK_63268_REG(0);
-+		periph_bases[1] += PERF_IRQMASK_63268_REG(1);
-+		periph_irq_count = 2;
-+		periph_width = 4;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_63268;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = BCM_63268_EXT_IRQ0;
-+		ext_irqs[1] = BCM_63268_EXT_IRQ1;
-+		ext_irqs[2] = BCM_63268_EXT_IRQ2;
-+		ext_irqs[3] = BCM_63268_EXT_IRQ3;
-+		ext_shift = 4;
-+		break;
- 	default:
- 		BUG();
- 	}
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -126,6 +126,20 @@
- #define BCM6368_RESET_PCIE	0
- #define BCM6368_RESET_PCIE_EXT	0
- 
-+#define BCM63268_RESET_SPI	SOFTRESET_63268_SPI_MASK
-+#define BCM63268_RESET_ENET	0
-+#define BCM63268_RESET_USBH	SOFTRESET_63268_USBH_MASK
-+#define BCM63268_RESET_USBD	SOFTRESET_63268_USBS_MASK
-+#define BCM63268_RESET_DSL	0
-+#define BCM63268_RESET_SAR	SOFTRESET_63268_SAR_MASK
-+#define BCM63268_RESET_EPHY	0
-+#define BCM63268_RESET_ENETSW	SOFTRESET_63268_ENETSW_MASK
-+#define BCM63268_RESET_PCM	SOFTRESET_63268_PCM_MASK
-+#define BCM63268_RESET_MPI	0
-+#define BCM63268_RESET_PCIE	(SOFTRESET_63268_PCIE_MASK | \
-+				 SOFTRESET_63268_PCIE_CORE_MASK)
-+#define BCM63268_RESET_PCIE_EXT	SOFTRESET_63268_PCIE_EXT_MASK
-+
- /*
-  * core reset bits
-  */
-@@ -157,6 +171,10 @@ static const u32 bcm6368_reset_bits[] =
- 	__GEN_RESET_BITS_TABLE(6368)
- };
- 
-+static const u32 bcm63268_reset_bits[] = {
-+	__GEN_RESET_BITS_TABLE(63268)
-+};
-+
- const u32 *bcm63xx_reset_bits;
- static int reset_reg;
- 
-@@ -183,6 +201,9 @@ static int __init bcm63xx_reset_bits_ini
- 	} else if (BCMCPU_IS_6368()) {
- 		reset_reg = PERF_SOFTRESET_6368_REG;
- 		bcm63xx_reset_bits = bcm6368_reset_bits;
-+	} else if (BCMCPU_IS_63268()) {
-+		reset_reg = PERF_SOFTRESET_63268_REG;
-+		bcm63xx_reset_bits = bcm63268_reset_bits;
- 	}
- 
- 	return 0;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -22,6 +22,11 @@
- #define BCM6362_CPU_ID		0x6362
- #define BCM6368_CPU_ID		0x6368
- #define BCM6369_CPU_ID		0x6369
-+#define BCM63167_CPU_ID		0x63167
-+#define BCM63168_CPU_ID		0x63168
-+#define BCM63169_CPU_ID		0x63169
-+#define BCM63268_CPU_ID		0x63268
-+#define BCM63269_CPU_ID		0x63269
- 
- void __init bcm63xx_cpu_init(void);
- u32 bcm63xx_get_cpu_variant(void);
-@@ -62,6 +67,10 @@ static inline u32 __pure __bcm63xx_get_c
- #ifdef CONFIG_BCM63XX_CPU_6368
- 		case BCM6368_CPU_ID:
- #endif
-+
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+		case BCM63268_CPU_ID:
-+#endif
- 		break;
- 	default:
- 		unreachable();
-@@ -87,6 +96,7 @@ static inline u32 __pure bcm63xx_get_cpu
- #define BCMCPU_IS_6358()	(bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
- #define BCMCPU_IS_6362()	(bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
- #define BCMCPU_IS_6368()	(bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
-+#define BCMCPU_IS_63268()	(bcm63xx_get_cpu_id() == BCM63268_CPU_ID)
- 
- #define BCMCPU_VARIANT_IS_3368() \
- 	(bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-@@ -110,6 +120,16 @@ static inline u32 __pure bcm63xx_get_cpu
- 	(bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
- #define BCMCPU_VARIANT_IS_6369() \
- 	(bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63167() \
-+	(bcm63xx_get_cpu_variant() == BCM63167_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63168() \
-+	(bcm63xx_get_cpu_variant() == BCM63168_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63169() \
-+	(bcm63xx_get_cpu_variant() == BCM63169_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63268() \
-+	(bcm63xx_get_cpu_variant() == BCM63268_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63269() \
-+	(bcm63xx_get_cpu_variant() == BCM63269_CPU_ID)
- 
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
-@@ -574,6 +594,52 @@ enum bcm63xx_regs_set {
- #define BCM_6368_RNG_BASE		(0xb0004180)
- #define BCM_6368_MISC_BASE		(0xdeadbeef)
- 
-+/*
-+ * 63268 register sets base address
-+ */
-+#define BCM_63268_DSL_LMEM_BASE		(0xdeadbeef)
-+#define BCM_63268_PERF_BASE		(0xb0000000)
-+#define BCM_63268_TIMER_BASE		(0xb0000080)
-+#define BCM_63268_WDT_BASE		(0xb000009c)
-+#define BCM_63268_UART0_BASE		(0xb0000180)
-+#define BCM_63268_UART1_BASE		(0xb00001a0)
-+#define BCM_63268_GPIO_BASE		(0xb00000c0)
-+#define BCM_63268_SPI_BASE		(0xb0000800)
-+#define BCM_63268_HSSPI_BASE		(0xb0001000)
-+#define BCM_63268_UDC0_BASE		(0xdeadbeef)
-+#define BCM_63268_USBDMA_BASE		(0xb000c800)
-+#define BCM_63268_OHCI0_BASE		(0xb0002600)
-+#define BCM_63268_OHCI_PRIV_BASE	(0xdeadbeef)
-+#define BCM_63268_USBH_PRIV_BASE	(0xb0002700)
-+#define BCM_63268_USBD_BASE		(0xb0002400)
-+#define BCM_63268_MPI_BASE		(0xdeadbeef)
-+#define BCM_63268_PCMCIA_BASE		(0xdeadbeef)
-+#define BCM_63268_PCIE_BASE		(0xb06e0000)
-+#define BCM_63268_SDRAM_REGS_BASE	(0xdeadbeef)
-+#define BCM_63268_DSL_BASE		(0xdeadbeef)
-+#define BCM_63268_UBUS_BASE		(0xdeadbeef)
-+#define BCM_63268_ENET0_BASE		(0xdeadbeef)
-+#define BCM_63268_ENET1_BASE		(0xdeadbeef)
-+#define BCM_63268_ENETDMA_BASE		(0xb000d800)
-+#define BCM_63268_ENETDMAC_BASE		(0xb000da00)
-+#define BCM_63268_ENETDMAS_BASE		(0xb000dc00)
-+#define BCM_63268_ENETSW_BASE		(0xb0700000)
-+#define BCM_63268_EHCI0_BASE		(0xb0002500)
-+#define BCM_63268_SDRAM_BASE		(0xdeadbeef)
-+#define BCM_63268_MEMC_BASE		(0xdeadbeef)
-+#define BCM_63268_DDR_BASE		(0xb0003000)
-+#define BCM_63268_M2M_BASE		(0xdeadbeef)
-+#define BCM_63268_ATM_BASE		(0xdeadbeef)
-+#define BCM_63268_XTM_BASE		(0xb0007000)
-+#define BCM_63268_XTMDMA_BASE		(0xb000b800)
-+#define BCM_63268_XTMDMAC_BASE		(0xdeadbeef)
-+#define BCM_63268_XTMDMAS_BASE		(0xdeadbeef)
-+#define BCM_63268_PCM_BASE		(0xb000b000)
-+#define BCM_63268_PCMDMA_BASE		(0xb000b800)
-+#define BCM_63268_PCMDMAC_BASE		(0xdeadbeef)
-+#define BCM_63268_PCMDMAS_BASE		(0xdeadbeef)
-+#define BCM_63268_RNG_BASE		(0xdeadbeef)
-+#define BCM_63268_MISC_BASE		(0xb0001800)
- 
- extern const unsigned long *bcm63xx_regs_base;
- 
-@@ -1042,6 +1108,73 @@ enum bcm63xx_irq {
- #define BCM_6368_EXT_IRQ4		(IRQ_INTERNAL_BASE + 24)
- #define BCM_6368_EXT_IRQ5		(IRQ_INTERNAL_BASE + 25)
- 
-+/*
-+ * 63268 irqs
-+ */
-+#define BCM_63268_HIGH_IRQ_BASE		(IRQ_INTERNAL_BASE + 32)
-+#define BCM_63268_VERY_HIGH_IRQ_BASE	(BCM_63268_HIGH_IRQ_BASE + 32)
-+
-+#define BCM_63268_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
-+#define BCM_63268_SPI_IRQ		(BCM_63268_VERY_HIGH_IRQ_BASE + 16)
-+#define BCM_63268_UART0_IRQ		(IRQ_INTERNAL_BASE + 5)
-+#define BCM_63268_UART1_IRQ		(BCM_63268_HIGH_IRQ_BASE + 2)
-+#define BCM_63268_DSL_IRQ		(IRQ_INTERNAL_BASE + 23)
-+#define BCM_63268_UDC0_IRQ		0
-+#define BCM_63268_ENET0_IRQ		0
-+#define BCM_63268_ENET1_IRQ		0
-+#define BCM_63268_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 13)
-+#define BCM_63268_HSSPI_IRQ		(IRQ_INTERNAL_BASE + 6)
-+#define BCM_63268_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 9)
-+#define BCM_63268_EHCI0_IRQ		(IRQ_INTERNAL_BASE + 10)
-+#define BCM_63268_USBD_IRQ		(IRQ_INTERNAL_BASE + 11)
-+#define BCM_63268_USBD_RXDMA0_IRQ	(IRQ_INTERNAL_BASE + 19)
-+#define BCM_63268_USBD_TXDMA0_IRQ	(BCM_63268_HIGH_IRQ_BASE + 4)
-+#define BCM_63268_USBD_RXDMA1_IRQ	(IRQ_INTERNAL_BASE + 20)
-+#define BCM_63268_USBD_TXDMA1_IRQ	(BCM_63268_HIGH_IRQ_BASE + 5)
-+#define BCM_63268_USBD_RXDMA2_IRQ	(IRQ_INTERNAL_BASE + 21)
-+#define BCM_63268_USBD_TXDMA2_IRQ	(BCM_63268_HIGH_IRQ_BASE + 6)
-+#define BCM_63268_PCMCIA_IRQ		0
-+#define BCM_63268_ENET0_RXDMA_IRQ	0
-+#define BCM_63268_ENET0_TXDMA_IRQ	0
-+#define BCM_63268_ENET1_RXDMA_IRQ	0
-+#define BCM_63268_ENET1_TXDMA_IRQ	0
-+#define BCM_63268_PCI_IRQ		(BCM_63268_HIGH_IRQ_BASE + 8)
-+#define BCM_63268_ATM_IRQ		0
-+#define BCM_63268_ENETSW_RXDMA0_IRQ	(IRQ_INTERNAL_BASE + 1)
-+#define BCM_63268_ENETSW_RXDMA1_IRQ	(IRQ_INTERNAL_BASE + 2)
-+#define BCM_63268_ENETSW_RXDMA2_IRQ	(IRQ_INTERNAL_BASE + 3)
-+#define BCM_63268_ENETSW_RXDMA3_IRQ	(IRQ_INTERNAL_BASE + 4)
-+#define BCM_63268_ENETSW_TXDMA0_IRQ	(BCM_63268_VERY_HIGH_IRQ_BASE + 0)
-+#define BCM_63268_ENETSW_TXDMA1_IRQ	(BCM_63268_VERY_HIGH_IRQ_BASE + 1)
-+#define BCM_63268_ENETSW_TXDMA2_IRQ	(BCM_63268_VERY_HIGH_IRQ_BASE + 2)
-+#define BCM_63268_ENETSW_TXDMA3_IRQ	(BCM_63268_VERY_HIGH_IRQ_BASE + 3)
-+#define BCM_63268_XTM_IRQ		(BCM_63268_HIGH_IRQ_BASE + 17)
-+#define BCM_63268_XTM_DMA0_IRQ		(IRQ_INTERNAL_BASE + 26)
-+
-+#define BCM_63268_RING_OSC_IRQ		(BCM_63268_HIGH_IRQ_BASE + 20)
-+#define BCM_63268_WLAN_GPIO_IRQ		(BCM_63268_HIGH_IRQ_BASE + 3)
-+#define BCM_63268_WLAN_IRQ		(IRQ_INTERNAL_BASE + 7)
-+#define BCM_63268_IPSEC_IRQ		(IRQ_INTERNAL_BASE + 8)
-+#define BCM_63268_NAND_IRQ		(BCM_63268_HIGH_IRQ_BASE + 18)
-+#define BCM_63268_PCM_IRQ		(IRQ_INTERNAL_BASE + 13)
-+#define BCM_63268_DG_IRQ		(IRQ_INTERNAL_BASE + 15)
-+#define BCM_63268_EPHY_ENERGY0_IRQ	(IRQ_INTERNAL_BASE + 16)
-+#define BCM_63268_EPHY_ENERGY1_IRQ	(IRQ_INTERNAL_BASE + 17)
-+#define BCM_63268_EPHY_ENERGY2_IRQ	(IRQ_INTERNAL_BASE + 18)
-+#define BCM_63268_EPHY_ENERGY3_IRQ	(IRQ_INTERNAL_BASE + 19)
-+#define BCM_63268_IPSEC_DMA0_IRQ	(IRQ_INTERNAL_BASE + 22)
-+#define BCM_63268_IPSEC_DMA1_IRQ	(BCM_63268_HIGH_IRQ_BASE + 7)
-+#define BCM_63268_FAP0_IRQ		(IRQ_INTERNAL_BASE + 24)
-+#define BCM_63268_FAP1_IRQ		(IRQ_INTERNAL_BASE + 25)
-+#define BCM_63268_PCM_DMA0_IRQ		(BCM_63268_HIGH_IRQ_BASE + 10)
-+#define BCM_63268_PCM_DMA1_IRQ		(BCM_63268_HIGH_IRQ_BASE + 11)
-+#define BCM_63268_DECT0_IRQ		(BCM_63268_HIGH_IRQ_BASE + 0)
-+#define BCM_63268_DECT1_IRQ		(BCM_63268_HIGH_IRQ_BASE + 1)
-+#define BCM_63268_EXT_IRQ0		(BCM_63268_HIGH_IRQ_BASE + 12)
-+#define BCM_63268_EXT_IRQ1		(BCM_63268_HIGH_IRQ_BASE + 13)
-+#define BCM_63268_EXT_IRQ2		(BCM_63268_HIGH_IRQ_BASE + 14)
-+#define BCM_63268_EXT_IRQ3		(BCM_63268_HIGH_IRQ_BASE + 15)
-+
- extern const int *bcm63xx_irqs;
- 
- #define __GEN_CPU_IRQ_TABLE(__cpu)					\
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -23,6 +23,8 @@ static inline unsigned long bcm63xx_gpio
- 		return 48;
- 	case BCM6368_CPU_ID:
- 		return 38;
-+	case BCM63268_CPU_ID:
-+		return 52;
- 	case BCM6348_CPU_ID:
- 	default:
- 		return 37;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -10,6 +10,8 @@
- #define PERF_REV_REG			0x0
- #define REV_CHIPID_SHIFT		16
- #define REV_CHIPID_MASK			(0xffff << REV_CHIPID_SHIFT)
-+#define REV_LONG_CHIPID_SHIFT		12
-+#define REV_LONG_CHIPID_MASK		(0xfffff << REV_LONG_CHIPID_SHIFT)
- #define REV_VARID_SHIFT			12
- #define REV_VARID_MASK			(0xf << REV_VARID_SHIFT)
- #define REV_REVID_SHIFT			0
-@@ -212,6 +214,52 @@
- 					CKCTL_6368_NAND_EN |		\
- 					CKCTL_6368_IPSEC_EN)
- 
-+#define CKCTL_63268_DISABLE_GLESS	(1 << 0)
-+#define CKCTL_63268_VDSL_QPROC_EN	(1 << 1)
-+#define CKCTL_63268_VDSL_AFE_EN		(1 << 2)
-+#define CKCTL_63268_VDSL_EN		(1 << 3)
-+#define CKCTL_63268_MIPS_EN		(1 << 4)
-+#define CKCTL_63268_WLAN_OCP_EN		(1 << 5)
-+#define CKCTL_63268_DECT_EN		(1 << 6)
-+#define CKCTL_63268_FAP0_EN		(1 << 7)
-+#define CKCTL_63268_FAP1_EN		(1 << 8)
-+#define CKCTL_63268_SAR_EN		(1 << 9)
-+#define CKCTL_63268_ROBOSW_EN		(1 << 10)
-+#define CKCTL_63268_PCM_EN		(1 << 11)
-+#define CKCTL_63268_USBD_EN		(1 << 12)
-+#define CKCTL_63268_USBH_EN		(1 << 13)
-+#define CKCTL_63268_IPSEC_EN		(1 << 14)
-+#define CKCTL_63268_SPI_EN		(1 << 15)
-+#define CKCTL_63268_HSSPI_EN		(1 << 16)
-+#define CKCTL_63268_PCIE_EN		(1 << 17)
-+#define CKCTL_63268_PHYMIPS_EN		(1 << 18)
-+#define CKCTL_63268_GMAC_EN		(1 << 19)
-+#define CKCTL_63268_NAND_EN		(1 << 20)
-+#define CKCTL_63268_TBUS_EN		(1 << 27)
-+#define CKCTL_63268_ROBOSW250_EN	(1 << 31)
-+
-+#define CKCTL_63268_ALL_SAFE_EN		(CKCTL_63268_VDSL_QPROC_EN |	\
-+					CKCTL_63268_VDSL_AFE_EN |	\
-+					CKCTL_63268_VDSL_EN |		\
-+					CKCTL_63268_WLAN_OCP_EN |	\
-+					CKCTL_63268_DECT_EN |		\
-+					CKCTL_63268_FAP0_EN |		\
-+					CKCTL_63268_FAP1_EN |		\
-+					CKCTL_63268_SAR_EN |		\
-+					CKCTL_63268_ROBOSW_EN |		\
-+					CKCTL_63268_PCM_EN |		\
-+					CKCTL_63268_USBD_EN |		\
-+					CKCTL_63268_USBH_EN |		\
-+					CKCTL_63268_IPSEC_EN |		\
-+					CKCTL_63268_SPI_EN |		\
-+					CKCTL_63268_HSSPI_EN |		\
-+					CKCTL_63268_PCIE_EN |		\
-+					CKCTL_63268_PHYMIPS_EN |	\
-+					CKCTL_63268_GMAC_EN |		\
-+					CKCTL_63268_NAND_EN |		\
-+					CKCTL_63268_TBUS_EN |		\
-+					CKCTL_63268_ROBOSW250_EN)
-+
- /* System PLL Control register	*/
- #define PERF_SYS_PLL_CTL_REG		0x8
- #define SYS_PLL_SOFT_RESET		0x1
-@@ -225,6 +273,7 @@
- #define PERF_IRQMASK_6358_REG(x)	(0xc + (x) * 0x2c)
- #define PERF_IRQMASK_6362_REG(x)	(0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6368_REG(x)	(0x20 + (x) * 0x10)
-+#define PERF_IRQMASK_63268_REG(x)	(0x20 + (x) * 0x20)
- 
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG		0x10
-@@ -235,6 +284,7 @@
- #define PERF_IRQSTAT_6358_REG(x)	(0x10 + (x) * 0x2c)
- #define PERF_IRQSTAT_6362_REG(x)	(0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6368_REG(x)	(0x28 + (x) * 0x10)
-+#define PERF_IRQSTAT_63268_REG(x)	(0x30 + (x) * 0x20)
- 
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368	0x14
-@@ -245,6 +295,7 @@
- #define PERF_EXTIRQ_CFG_REG_6358	0x14
- #define PERF_EXTIRQ_CFG_REG_6362	0x18
- #define PERF_EXTIRQ_CFG_REG_6368	0x18
-+#define PERF_EXTIRQ_CFG_REG_63268	0x18
- 
- #define PERF_EXTIRQ_CFG_REG2_6358	0x1c
- #define PERF_EXTIRQ_CFG_REG2_6368	0x1c
-@@ -275,6 +326,7 @@
- #define PERF_SOFTRESET_6358_REG		0x34
- #define PERF_SOFTRESET_6362_REG		0x10
- #define PERF_SOFTRESET_6368_REG		0x10
-+#define PERF_SOFTRESET_63268_REG	0x10
- 
- #define SOFTRESET_3368_SPI_MASK		(1 << 0)
- #define SOFTRESET_3368_ENET_MASK	(1 << 2)
-@@ -368,6 +420,26 @@
- #define SOFTRESET_6368_USBH_MASK	(1 << 12)
- #define SOFTRESET_6368_PCM_MASK		(1 << 13)
- 
-+#define SOFTRESET_63268_SPI_MASK	(1 << 0)
-+#define SOFTRESET_63268_IPSEC_MASK	(1 << 1)
-+#define SOFTRESET_63268_EPHY_MASK	(1 << 2)
-+#define SOFTRESET_63268_SAR_MASK	(1 << 3)
-+#define SOFTRESET_63268_ENETSW_MASK	(1 << 4)
-+#define SOFTRESET_63268_USBS_MASK	(1 << 5)
-+#define SOFTRESET_63268_USBH_MASK	(1 << 6)
-+#define SOFTRESET_63268_PCM_MASK	(1 << 7)
-+#define SOFTRESET_63268_PCIE_CORE_MASK	(1 << 8)
-+#define SOFTRESET_63268_PCIE_MASK	(1 << 9)
-+#define SOFTRESET_63268_PCIE_EXT_MASK	(1 << 10)
-+#define SOFTRESET_63268_WLAN_SHIM_MASK	(1 << 11)
-+#define SOFTRESET_63268_DDR_PHY_MASK	(1 << 12)
-+#define SOFTRESET_63268_FAP0_MASK	(1 << 13)
-+#define SOFTRESET_63268_WLAN_UBUS_MASK	(1 << 14)
-+#define SOFTRESET_63268_DECT_MASK	(1 << 15)
-+#define SOFTRESET_63268_FAP1_MASK	(1 << 16)
-+#define SOFTRESET_63268_PCIE_HARD_MASK	(1 << 17)
-+#define SOFTRESET_63268_GPHY_MASK	(1 << 18)
-+
- /* MIPS PLL control register */
- #define PERF_MIPSPLLCTL_REG		0x34
- #define MIPSPLLCTL_N1_SHIFT		20
-@@ -1367,6 +1439,13 @@
- #define STRAPBUS_6362_BOOT_SEL_SERIAL	(1 << 15)
- #define STRAPBUS_6362_BOOT_SEL_NAND	(0 << 15)
- 
-+#define MISC_STRAPBUS_63268_REG		0x14
-+#define STRAPBUS_63268_HSSPI_CLK_FAST	(1 << 9)
-+#define STRAPBUS_63268_BOOT_SEL_SERIAL	(1 << 11)
-+#define STRAPBUS_63268_BOOT_SEL_NAND	(0 << 11)
-+#define STRAPBUS_63268_FCVO_SHIFT	21
-+#define STRAPBUS_63268_FCVO_MASK	(0xf << STRAPBUS_63268_FCVO_SHIFT)
-+
- #define MISC_STRAPBUS_6328_REG		0x240
- #define STRAPBUS_6328_FCVO_SHIFT	7
- #define STRAPBUS_6328_FCVO_MASK		(0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -26,6 +26,7 @@ static inline int is_bcm63xx_internal_re
- 	case BCM6328_CPU_ID:
- 	case BCM6362_CPU_ID:
- 	case BCM6368_CPU_ID:
-+	case BCM63268_CPU_ID:
- 		if (offset >= 0xb0000000 && offset < 0xb1000000)
- 			return 1;
- 		break;
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -35,7 +35,7 @@ static struct platform_device bcm63xx_hs
- 
- int __init bcm63xx_hsspi_register(void)
- {
--	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
-+	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
- 		return -ENODEV;
- 
- 	spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -184,7 +184,8 @@ static int __init register_shared(void)
- 	else
- 		shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
- 
--	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
-+	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
-+		BCMCPU_IS_63268())
- 		chan_count = 32;
- 	else if (BCMCPU_IS_6345())
- 		chan_count = 8;
-@@ -292,7 +293,8 @@ bcm63xx_enetsw_register(const struct bcm
- {
- 	int ret;
- 
--	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
-+		!BCMCPU_IS_63268())
- 		return -ENODEV;
- 
- 	ret = register_shared();
-@@ -313,6 +315,8 @@ bcm63xx_enetsw_register(const struct bcm
- 		enetsw_pd.num_ports = ENETSW_PORTS_6328;
- 	else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
- 		enetsw_pd.num_ports = ENETSW_PORTS_6368;
-+	else if (BCMCPU_IS_63268())
-+		enetsw_pd.num_ports = ENETSW_PORTS_63268;
- 
- 	enetsw_pd.dma_has_sram = true;
- 	enetsw_pd.dma_chan_width = ENETDMA_CHAN_WIDTH;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -67,6 +67,7 @@ struct bcm63xx_enet_platform_data {
- #define ENETSW_MAX_PORT	8
- #define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
- #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-+#define ENETSW_PORTS_63268 8 /* 3 FE PHY + 1 GE PHY + 4 RGMII */
- 
- #define ENETSW_RGMII_PORT0	4
- 
diff --git a/target/linux/bcm63xx/patches-5.4/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch b/target/linux/bcm63xx/patches-5.4/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch
deleted file mode 100644
index e9f9e2b01d..0000000000
--- a/target/linux/bcm63xx/patches-5.4/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 5c290c81dbdb4433600593fe80c88eb4af86e791 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:22:40 +0100
-Subject: [PATCH 50/53] MIPS: BCM63XX: add pcie support for BCM63268
-
----
- arch/mips/bcm63xx/reset.c                       | 3 ++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 5 +++++
- arch/mips/pci/pci-bcm63xx.c                     | 4 ++++
- 3 files changed, 11 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -137,7 +137,8 @@
- #define BCM63268_RESET_PCM	SOFTRESET_63268_PCM_MASK
- #define BCM63268_RESET_MPI	0
- #define BCM63268_RESET_PCIE	(SOFTRESET_63268_PCIE_MASK | \
--				 SOFTRESET_63268_PCIE_CORE_MASK)
-+				 SOFTRESET_63268_PCIE_CORE_MASK | \
-+				 SOFTRESET_63268_PCIE_HARD_MASK)
- #define BCM63268_RESET_PCIE_EXT	SOFTRESET_63268_PCIE_EXT_MASK
- 
- /*
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -46,6 +46,11 @@
- #define BCM_PCIE_MEM_END_PA_6328	(BCM_PCIE_MEM_BASE_PA_6328 +	\
- 					BCM_PCIE_MEM_SIZE_6328 - 1)
- 
-+#define BCM_PCIE_MEM_BASE_PA_63268	0x11000000
-+#define BCM_PCIE_MEM_SIZE_63268		(15 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_63268	(BCM_PCIE_MEM_BASE_PA_63268 +	\
-+					BCM_PCIE_MEM_SIZE_63268 - 1)
-+
- /*
-  * Internal registers are accessed through KSEG3
-  */
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -337,11 +337,15 @@ static int __init bcm63xx_pci_init(void)
- 	if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
- 		bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
- 		bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-+	} else if (BCMCPU_IS_63268()) {
-+		bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_63268;
-+		bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_63268;
- 	}
- 
- 	switch (bcm63xx_get_cpu_id()) {
- 	case BCM6328_CPU_ID:
- 	case BCM6362_CPU_ID:
-+	case BCM63268_CPU_ID:
- 		return bcm63xx_register_pcie();
- 	case BCM3368_CPU_ID:
- 	case BCM6348_CPU_ID:
diff --git a/target/linux/bcm63xx/patches-5.4/341-MIPS-BCM63XX-add-support-for-BCM6318.patch b/target/linux/bcm63xx/patches-5.4/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
deleted file mode 100644
index ac354a4787..0000000000
--- a/target/linux/bcm63xx/patches-5.4/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
+++ /dev/null
@@ -1,699 +0,0 @@
-From 60c29522a8c77d96145d965589c56befda7d4c3d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 01:24:09 +0100
-Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
-
----
- arch/mips/bcm63xx/Kconfig                         |   5 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
- arch/mips/bcm63xx/clk.c                           |   8 +-
- arch/mips/bcm63xx/cpu.c                           |  53 +++++++++++
- arch/mips/bcm63xx/dev-flash.c                     |   3 +
- arch/mips/bcm63xx/dev-spi.c                       |   2 +-
- arch/mips/bcm63xx/irq.c                           |  10 ++
- arch/mips/bcm63xx/prom.c                          |   2 +-
- arch/mips/bcm63xx/reset.c                         |  24 +++++
- arch/mips/bcm63xx/setup.c                         |   5 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 107 ++++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  75 ++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
- 13 files changed, 291 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -19,6 +19,11 @@ config BCM63XX_EHCI
- 	select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
- 	select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
- 
-+config BCM63XX_CPU_6318
-+	bool "support 6318 CPU"
-+	select SYS_HAS_CPU_BMIPS32_3300
-+	select HAVE_PCI
-+
- config BCM63XX_CPU_6328
- 	bool "support 6328 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -694,7 +694,7 @@ void __init board_prom_init(void)
- 	/* read base address of boot chip select (0)
- 	 * 6328/6362 do not have MPI but boot from a fixed address
- 	 */
--	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-+	if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
- 		val = 0x18000000;
- 	} else {
- 		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -289,7 +289,9 @@ static void hsspi_set(struct clk *clk, i
- {
- 	u32 mask;
- 
--	if (BCMCPU_IS_6328())
-+	if (BCMCPU_IS_6318())
-+		mask = CKCTL_6318_HSSPI_EN;
-+	else if (BCMCPU_IS_6328())
- 		mask = CKCTL_6328_HSSPI_EN;
- 	else if (BCMCPU_IS_6362())
- 		mask = CKCTL_6362_HSSPI_EN;
-@@ -456,6 +458,19 @@ static struct clk_lookup bcm3368_clks[]
- 	CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
- };
- 
-+static struct clk_lookup bcm6318_clks[] = {
-+	/* fixed rate clocks */
-+	CLKDEV_INIT(NULL, "periph", &clk_periph),
-+	CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+	CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+	/* gated clocks */
-+	CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-+	CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+	CLKDEV_INIT(NULL, "usbd", &clk_usbh),
-+	CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
-+	CLKDEV_INIT(NULL, "pcie", &clk_pcie),
-+};
-+
- static struct clk_lookup bcm6328_clks[] = {
- 	/* fixed rate clocks */
- 	CLKDEV_INIT(NULL, "periph", &clk_periph),
-@@ -577,6 +592,7 @@ static struct clk_lookup bcm63268_clks[]
- 	CLKDEV_INIT(NULL, "pcie", &clk_pcie),
- };
- 
-+#define HSSPI_PLL_HZ_6318	250000000
- #define HSSPI_PLL_HZ_6328	133333333
- #define HSSPI_PLL_HZ_6362	400000000
- 
-@@ -586,6 +602,10 @@ static int __init bcm63xx_clk_init(void)
- 	case BCM3368_CPU_ID:
- 		clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
- 		break;
-+	case BCM6318_CPU_ID:
-+		clk_hsspi_pll.rate = HSSPI_PLL_HZ_6318;
-+		clkdev_add_table(bcm6318_clks, ARRAY_SIZE(bcm6318_clks));
-+		break;
- 	case BCM6328_CPU_ID:
- 		clk_hsspi_pll.rate = HSSPI_PLL_HZ_6328;
- 		clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks));
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -41,6 +41,14 @@ static const int bcm3368_irqs[] = {
- 	__GEN_CPU_IRQ_TABLE(3368)
- };
- 
-+static const unsigned long bcm6318_regs_base[] = {
-+	__GEN_CPU_REGS_TABLE(6318)
-+};
-+
-+static const int bcm6318_irqs[] = {
-+	__GEN_CPU_IRQ_TABLE(6318)
-+};
-+
- static const unsigned long bcm6328_regs_base[] = {
- 	__GEN_CPU_REGS_TABLE(6328)
- };
-@@ -134,6 +142,10 @@ unsigned int bcm63xx_get_memory_size(voi
- 	return bcm63xx_memory_size;
- }
- 
-+#define STRAP_OVERRIDE_BUS_REG		0x0
-+#define OVERRIDE_BUS_MIPS_FREQ_SHIFT	23
-+#define OVERRIDE_BUS_MIPS_FREQ_MASK	(0x3 << OVERRIDE_BUS_MIPS_FREQ_SHIFT)
-+
- static unsigned int detect_cpu_clock(void)
- {
- 	u32 cpu_id = bcm63xx_get_cpu_id();
-@@ -142,6 +154,30 @@ static unsigned int detect_cpu_clock(voi
- 	case BCM3368_CPU_ID:
- 		return 300000000;
- 
-+	case BCM6318_CPU_ID:
-+	{
-+		unsigned int tmp, mips_pll_fcvo;
-+
-+		tmp = bcm_readl(BCM_6318_STRAP_BASE + STRAP_OVERRIDE_BUS_REG);
-+
-+		pr_info("strap_override_bus = %08x\n", tmp);
-+
-+		mips_pll_fcvo = (tmp & OVERRIDE_BUS_MIPS_FREQ_MASK)
-+				>> OVERRIDE_BUS_MIPS_FREQ_SHIFT;
-+
-+		switch (mips_pll_fcvo) {
-+		case 0:
-+			return 166000000;
-+		case 1:
-+			return 400000000;
-+		case 2:
-+			return 250000000;
-+		case 3:
-+			return 333000000;
-+		default:
-+			return 320000000;
-+		}
-+	}
- 	case BCM6328_CPU_ID:
- 	{
- 		unsigned int tmp, mips_pll_fcvo;
-@@ -297,6 +333,13 @@ static unsigned int detect_memory_size(v
- 	unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
- 	u32 val;
- 
-+	if (BCMCPU_IS_6318()) {
-+		val = bcm_sdram_readl(SDRAM_CFG_REG);
-+		val = val & SDRAM_CFG_6318_SPACE_MASK;
-+		val >>= SDRAM_CFG_6318_SPACE_SHIFT;
-+		return 1 << (val + 20);
-+	}
-+
- 	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
- 		return bcm_ddr_readl(DDR_CSEND_REG) << 24;
- 
-@@ -343,6 +386,12 @@ void __init bcm63xx_cpu_init(void)
- 
- 	switch (current_cpu_type()) {
- 	case CPU_BMIPS3300:
-+		if ((read_c0_prid() & 0xff) >= 0x33) {
-+			/* BCM6318 */
-+			chipid_reg = BCM_6368_PERF_BASE;
-+			break;
-+		}
-+
- 		if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
- 			__cpu_name[cpu] = "Broadcom BCM6338";
- 		/* fall-through */
-@@ -390,6 +439,10 @@ void __init bcm63xx_cpu_init(void)
- 	bcm63xx_cpu_variant = bcm63xx_cpu_id;
- 
- 	switch (bcm63xx_cpu_id) {
-+	case BCM6318_CPU_ID:
-+		bcm63xx_regs_base = bcm6318_regs_base;
-+		bcm63xx_irqs = bcm6318_irqs;
-+		break;
- 	case BCM3368_CPU_ID:
- 		bcm63xx_regs_base = bcm3368_regs_base;
- 		bcm63xx_irqs = bcm3368_irqs;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -60,6 +60,9 @@ static int __init bcm63xx_detect_flash_t
- 	u32 val;
- 
- 	switch (bcm63xx_get_cpu_id()) {
-+	case BCM6318_CPU_ID:
-+		/* only support serial flash */
-+		return BCM63XX_FLASH_TYPE_SERIAL;
- 	case BCM6328_CPU_ID:
- 		val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
- 		if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -38,7 +38,7 @@ static struct platform_device bcm63xx_sp
- 
- int __init bcm63xx_spi_register(void)
- {
--	if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
-+	if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
- 		return -ENODEV;
- 
- 	spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -48,6 +48,19 @@ void __init arch_init_irq(void)
- 		ext_irqs[3] = BCM_3368_EXT_IRQ3;
- 		ext_shift = 4;
- 		break;
-+	case BCM6318_CPU_ID:
-+		periph_bases[0] += PERF_IRQMASK_6318_REG;
-+		periph_irq_count = 1;
-+		periph_width = 4;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6318;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = BCM_6318_EXT_IRQ0;
-+		ext_irqs[1] = BCM_6318_EXT_IRQ0;
-+		ext_irqs[2] = BCM_6318_EXT_IRQ0;
-+		ext_irqs[3] = BCM_6318_EXT_IRQ0;
-+		ext_shift = 4;
-+		break;
- 	case BCM6328_CPU_ID:
- 		periph_bases[0] += PERF_IRQMASK_6328_REG(0);
- 		periph_bases[1] += PERF_IRQMASK_6328_REG(1);
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -68,7 +68,7 @@ void __init prom_init(void)
- 
- 			if (reg & OTP_6328_REG3_TP1_DISABLED)
- 				bmips_smp_enabled = 0;
--		} else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
-+		} else if (BCMCPU_IS_6318() || BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
- 			bmips_smp_enabled = 0;
- 		}
- 
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -44,6 +44,23 @@
- #define BCM3368_RESET_PCIE	0
- #define BCM3368_RESET_PCIE_EXT	0
- 
-+
-+#define BCM6318_RESET_SPI	SOFTRESET_6318_SPI_MASK
-+#define BCM6318_RESET_ENET	0
-+#define BCM6318_RESET_USBH	SOFTRESET_6318_USBH_MASK
-+#define BCM6318_RESET_USBD	SOFTRESET_6318_USBS_MASK
-+#define BCM6318_RESET_DSL	0
-+#define BCM6318_RESET_SAR	SOFTRESET_6318_SAR_MASK
-+#define BCM6318_RESET_EPHY	SOFTRESET_6318_EPHY_MASK
-+#define BCM6318_RESET_ENETSW	SOFTRESET_6318_ENETSW_MASK
-+#define BCM6318_RESET_PCM	0
-+#define BCM6318_RESET_MPI	0
-+#define BCM6318_RESET_PCIE	\
-+				(SOFTRESET_6318_PCIE_MASK |		\
-+				 SOFTRESET_6318_PCIE_CORE_MASK |	\
-+				 SOFTRESET_6318_PCIE_HARD_MASK)
-+#define BCM6318_RESET_PCIE_EXT	SOFTRESET_6318_PCIE_EXT_MASK
-+
- #define BCM6328_RESET_SPI	SOFTRESET_6328_SPI_MASK
- #define BCM6328_RESET_ENET	0
- #define BCM6328_RESET_USBH	SOFTRESET_6328_USBH_MASK
-@@ -148,6 +165,10 @@ static const u32 bcm3368_reset_bits[] =
- 	__GEN_RESET_BITS_TABLE(3368)
- };
- 
-+static const u32 bcm6318_reset_bits[] = {
-+	__GEN_RESET_BITS_TABLE(6318)
-+};
-+
- static const u32 bcm6328_reset_bits[] = {
- 	__GEN_RESET_BITS_TABLE(6328)
- };
-@@ -184,6 +205,9 @@ static int __init bcm63xx_reset_bits_ini
- 	if (BCMCPU_IS_3368()) {
- 		reset_reg = PERF_SOFTRESET_6358_REG;
- 		bcm63xx_reset_bits = bcm3368_reset_bits;
-+	} else if (BCMCPU_IS_6318()) {
-+		reset_reg = PERF_SOFTRESET_6318_REG;
-+		bcm63xx_reset_bits = bcm6318_reset_bits;
- 	} else if (BCMCPU_IS_6328()) {
- 		reset_reg = PERF_SOFTRESET_6328_REG;
- 		bcm63xx_reset_bits = bcm6328_reset_bits;
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -72,6 +72,9 @@ void bcm63xx_machine_reboot(void)
- 	case BCM3368_CPU_ID:
- 		perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
- 		break;
-+	case BCM6318_CPU_ID:
-+		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6318;
-+		break;
- 	case BCM6328_CPU_ID:
- 		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
- 		break;
-@@ -111,7 +114,7 @@ void bcm63xx_machine_reboot(void)
- 		bcm6348_a1_reboot();
- 
- 	pr_info("triggering watchdog soft-reset...\n");
--	if (BCMCPU_IS_6328()) {
-+	if (BCMCPU_IS_6318() || BCMCPU_IS_6328()) {
- 		bcm_wdt_writel(1, WDT_SOFTRESET_REG);
- 	} else {
- 		reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -11,6 +11,7 @@
-  * arm mach-types)
-  */
- #define BCM3368_CPU_ID		0x3368
-+#define BCM6318_CPU_ID		0x6318
- #define BCM6328_CPU_ID		0x6328
- #define BCM63281_CPU_ID		0x63281
- #define BCM63283_CPU_ID		0x63283
-@@ -40,6 +41,10 @@ static inline u32 __pure __bcm63xx_get_c
- 		case BCM3368_CPU_ID:
- #endif
- 
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+		case BCM6318_CPU_ID:
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6328
- 		case BCM6328_CPU_ID:
- #endif
-@@ -89,6 +94,7 @@ static inline u32 __pure bcm63xx_get_cpu
- }
- 
- #define BCMCPU_IS_3368()	(bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
-+#define BCMCPU_IS_6318()	(bcm63xx_get_cpu_id() == BCM6318_CPU_ID)
- #define BCMCPU_IS_6328()	(bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
- #define BCMCPU_IS_6338()	(bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
- #define BCMCPU_IS_6345()	(bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
-@@ -100,6 +106,8 @@ static inline u32 __pure bcm63xx_get_cpu
- 
- #define BCMCPU_VARIANT_IS_3368() \
- 	(bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6318() \
-+	(bcm63xx_get_cpu_variant() == BCM6318_CPU_ID)
- #define BCMCPU_VARIANT_IS_63281() \
- 	(bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
- #define BCMCPU_VARIANT_IS_63283() \
-@@ -256,6 +264,56 @@ enum bcm63xx_regs_set {
- #define BCM_3368_MISC_BASE		(0xdeadbeef)
- 
- /*
-+ * 6318 register sets base address
-+ */
-+#define BCM_6318_DSL_LMEM_BASE		(0xdeadbeef)
-+#define BCM_6318_PERF_BASE		(0xb0000000)
-+#define BCM_6318_TIMER_BASE		(0xb0000040)
-+#define BCM_6318_WDT_BASE		(0xb0000068)
-+#define BCM_6318_UART0_BASE		(0xb0000100)
-+#define BCM_6318_UART1_BASE		(0xdeadbeef)
-+#define BCM_6318_GPIO_BASE		(0xb0000080)
-+#define BCM_6318_SPI_BASE		(0xdeadbeef)
-+#define BCM_6318_HSSPI_BASE		(0xb0003000)
-+#define BCM_6318_UDC0_BASE		(0xdeadbeef)
-+#define BCM_6318_USBDMA_BASE		(0xb0006800)
-+#define BCM_6318_OHCI0_BASE		(0xb0005100)
-+#define BCM_6318_OHCI_PRIV_BASE		(0xdeadbeef)
-+#define BCM_6318_USBH_PRIV_BASE		(0xb0005200)
-+#define BCM_6318_USBD_BASE		(0xb0006000)
-+#define BCM_6318_MPI_BASE		(0xdeadbeef)
-+#define BCM_6318_PCMCIA_BASE		(0xdeadbeef)
-+#define BCM_6318_PCIE_BASE		(0xb0010000)
-+#define BCM_6318_SDRAM_REGS_BASE	(0xdeadbeef)
-+#define BCM_6318_DSL_BASE		(0xdeadbeef)
-+#define BCM_6318_UBUS_BASE		(0xdeadbeef)
-+#define BCM_6318_ENET0_BASE		(0xdeadbeef)
-+#define BCM_6318_ENET1_BASE		(0xdeadbeef)
-+#define BCM_6318_ENETDMA_BASE		(0xb0088000)
-+#define BCM_6318_ENETDMAC_BASE		(0xb0088200)
-+#define BCM_6318_ENETDMAS_BASE		(0xb0088400)
-+#define BCM_6318_ENETSW_BASE		(0xb0080000)
-+#define BCM_6318_EHCI0_BASE		(0xb0005000)
-+#define BCM_6318_SDRAM_BASE		(0xb0004000)
-+#define BCM_6318_MEMC_BASE		(0xdeadbeef)
-+#define BCM_6318_DDR_BASE		(0xdeadbeef)
-+#define BCM_6318_M2M_BASE		(0xdeadbeef)
-+#define BCM_6318_ATM_BASE		(0xdeadbeef)
-+#define BCM_6318_XTM_BASE		(0xdeadbeef)
-+#define BCM_6318_XTMDMA_BASE		(0xb000c000)
-+#define BCM_6318_XTMDMAC_BASE		(0xdeadbeef)
-+#define BCM_6318_XTMDMAS_BASE		(0xdeadbeef)
-+#define BCM_6318_PCM_BASE		(0xdeadbeef)
-+#define BCM_6318_PCMDMA_BASE		(0xdeadbeef)
-+#define BCM_6318_PCMDMAC_BASE		(0xdeadbeef)
-+#define BCM_6318_PCMDMAS_BASE		(0xdeadbeef)
-+#define BCM_6318_RNG_BASE		(0xdeadbeef)
-+#define BCM_6318_MISC_BASE		(0xb0000280)
-+#define BCM_6318_OTP_BASE		(0xdeadbeef)
-+
-+#define BCM_6318_STRAP_BASE		(0xb0000900)
-+
-+/*
-  * 6328 register sets base address
-  */
- #define BCM_6328_DSL_LMEM_BASE		(0xdeadbeef)
-@@ -778,6 +836,55 @@ enum bcm63xx_irq {
- #define BCM_3368_EXT_IRQ2		(IRQ_INTERNAL_BASE + 27)
- #define BCM_3368_EXT_IRQ3		(IRQ_INTERNAL_BASE + 28)
- 
-+/*
-+ * 6318 irqs
-+ */
-+#define BCM_6318_HIGH_IRQ_BASE		(IRQ_INTERNAL_BASE + 32)
-+#define BCM_6318_VERY_HIGH_IRQ_BASE	(BCM_6318_HIGH_IRQ_BASE + 32)
-+
-+#define BCM_6318_TIMER_IRQ		(IRQ_INTERNAL_BASE + 31)
-+#define BCM_6318_SPI_IRQ		0
-+#define BCM_6318_UART0_IRQ		(IRQ_INTERNAL_BASE + 28)
-+#define BCM_6318_UART1_IRQ		0
-+#define BCM_6318_DSL_IRQ		(IRQ_INTERNAL_BASE + 21)
-+#define BCM_6318_UDC0_IRQ		0
-+#define BCM_6318_ENET0_IRQ		0
-+#define BCM_6318_ENET1_IRQ		0
-+#define BCM_6318_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 12)
-+#define BCM_6318_HSSPI_IRQ		(IRQ_INTERNAL_BASE + 29)
-+#define BCM_6318_OHCI0_IRQ		(BCM_6318_HIGH_IRQ_BASE + 9)
-+#define BCM_6318_EHCI0_IRQ		(BCM_6318_HIGH_IRQ_BASE + 10)
-+#define BCM_6318_USBD_IRQ		(IRQ_INTERNAL_BASE + 4)
-+#define BCM_6318_USBD_RXDMA0_IRQ	(IRQ_INTERNAL_BASE + 5)
-+#define BCM_6318_USBD_TXDMA0_IRQ	(IRQ_INTERNAL_BASE + 6)
-+#define BCM_6318_USBD_RXDMA1_IRQ	(IRQ_INTERNAL_BASE + 7)
-+#define BCM_6318_USBD_TXDMA1_IRQ	(IRQ_INTERNAL_BASE + 8)
-+#define BCM_6318_USBD_RXDMA2_IRQ	(IRQ_INTERNAL_BASE + 9)
-+#define BCM_6318_USBD_TXDMA2_IRQ	(IRQ_INTERNAL_BASE + 10)
-+#define BCM_6318_PCMCIA_IRQ		0
-+#define BCM_6318_ENET0_RXDMA_IRQ	0
-+#define BCM_6318_ENET0_TXDMA_IRQ	0
-+#define BCM_6318_ENET1_RXDMA_IRQ	0
-+#define BCM_6318_ENET1_TXDMA_IRQ	0
-+#define BCM_6318_PCI_IRQ		(IRQ_INTERNAL_BASE + 23)
-+#define BCM_6318_ATM_IRQ		0
-+#define BCM_6318_ENETSW_RXDMA0_IRQ	(BCM_6318_HIGH_IRQ_BASE + 0)
-+#define BCM_6318_ENETSW_RXDMA1_IRQ	(BCM_6318_HIGH_IRQ_BASE + 1)
-+#define BCM_6318_ENETSW_RXDMA2_IRQ	(BCM_6318_HIGH_IRQ_BASE + 2)
-+#define BCM_6318_ENETSW_RXDMA3_IRQ	(BCM_6318_HIGH_IRQ_BASE + 3)
-+#define BCM_6318_ENETSW_TXDMA0_IRQ	(BCM_6318_VERY_HIGH_IRQ_BASE + 10)
-+#define BCM_6318_ENETSW_TXDMA1_IRQ	(BCM_6318_VERY_HIGH_IRQ_BASE + 11)
-+#define BCM_6318_ENETSW_TXDMA2_IRQ	(BCM_6318_VERY_HIGH_IRQ_BASE + 12)
-+#define BCM_6318_ENETSW_TXDMA3_IRQ	(BCM_6318_VERY_HIGH_IRQ_BASE + 13)
-+#define BCM_6318_XTM_IRQ		(BCM_6318_HIGH_IRQ_BASE + 31)
-+#define BCM_6318_XTM_DMA0_IRQ		(BCM_6318_HIGH_IRQ_BASE + 11)
-+
-+#define BCM_6318_PCM_DMA0_IRQ		(IRQ_INTERNAL_BASE + 2)
-+#define BCM_6318_PCM_DMA1_IRQ		(IRQ_INTERNAL_BASE + 3)
-+#define BCM_6318_EXT_IRQ0		(IRQ_INTERNAL_BASE + 24)
-+#define BCM_6318_EXT_IRQ1		(IRQ_INTERNAL_BASE + 25)
-+#define BCM_6318_EXT_IRQ2		(IRQ_INTERNAL_BASE + 26)
-+#define BCM_6318_EXT_IRQ3		(IRQ_INTERNAL_BASE + 27)
- 
- /*
-  * 6328 irqs
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -53,6 +53,39 @@
- 					 CKCTL_3368_EMUSB_EN | \
- 					 CKCTL_3368_USBU_EN)
- 
-+#define CKCTL_6318_ADSL_ASB_EN		(1 << 0)
-+#define CKCTL_6318_USB_ASB_EN		(1 << 1)
-+#define CKCTL_6318_MIPS_ASB_EN		(1 << 2)
-+#define CKCTL_6318_PCIE_ASB_EN		(1 << 3)
-+#define CKCTL_6318_PHYMIPS_ASB_EN	(1 << 4)
-+#define CKCTL_6318_ROBOSW_ASB_EN	(1 << 5)
-+#define CKCTL_6318_SAR_ASB_EN		(1 << 6)
-+#define CKCTL_6318_SDR_ASB_EN		(1 << 7)
-+#define CKCTL_6318_SWREG_ASB_EN		(1 << 8)
-+#define CKCTL_6318_PERIPH_ASB_EN	(1 << 9)
-+#define CKCTL_6318_CPUBUS160_EN		(1 << 10)
-+#define CKCTL_6318_ADSL_EN		(1 << 11)
-+#define CKCTL_6318_SAR125_EN		(1 << 12)
-+#define CKCTL_6318_MIPS_EN		(1 << 13)
-+#define CKCTL_6318_PCIE_EN		(1 << 14)
-+#define CKCTL_6318_ROBOSW250_EN		(1 << 16)
-+#define CKCTL_6318_ROBOSW025_EN		(1 << 17)
-+#define CKCTL_6318_SDR_EN		(1 << 19)
-+#define CKCTL_6318_USB_EN		(1 << 20) /* both device and host */
-+#define CKCTL_6318_HSSPI_EN		(1 << 25)
-+#define CKCTL_6318_PCIE25_EN		(1 << 27)
-+#define CKCTL_6318_PHYMIPS_EN		(1 << 28)
-+#define CKCTL_6318_ADSL_AFE_EN		(1 << 29)
-+#define CKCTL_6318_ADSL_QPROC_EN	(1 << 30)
-+
-+#define CKCTL_6318_ALL_SAFE_EN		(CKCTL_6318_PHYMIPS_EN |	\
-+					CKCTL_6318_ADSL_QPROC_EN |	\
-+					CKCTL_6318_ADSL_AFE_EN |	\
-+					CKCTL_6318_ADSL_EN |		\
-+					CKCTL_6318_SAR_EN  |		\
-+					CKCTL_6318_USB_EN |		\
-+					CKCTL_6318_PCIE_EN)
-+
- #define CKCTL_6328_PHYMIPS_EN		(1 << 0)
- #define CKCTL_6328_ADSL_QPROC_EN	(1 << 1)
- #define CKCTL_6328_ADSL_AFE_EN		(1 << 2)
-@@ -260,12 +293,27 @@
- 					CKCTL_63268_TBUS_EN |		\
- 					CKCTL_63268_ROBOSW250_EN)
- 
-+/* UBUS Clock Control register */
-+#define PERF_UB_CKCTL_REG		0x10
-+
-+#define UB_CKCTL_6318_ADSL_EN		(1 << 0)
-+#define UB_CKCTL_6318_ARB_EN		(1 << 1)
-+#define UB_CKCTL_6318_MIPS_EN		(1 << 2)
-+#define UB_CKCTL_6318_PCIE_EN		(1 << 3)
-+#define UB_CKCTL_6318_PERIPH_EN		(1 << 4)
-+#define UB_CKCTL_6318_PHYMIPS_EN	(1 << 5)
-+#define UB_CKCTL_6318_ROBOSW_EN		(1 << 6)
-+#define UB_CKCTL_6318_SAR_EN		(1 << 7)
-+#define UB_CKCTL_6318_SDR_EN		(1 << 8)
-+#define UB_CKCTL_6318_USB_EN		(1 << 9)
-+
- /* System PLL Control register	*/
- #define PERF_SYS_PLL_CTL_REG		0x8
- #define SYS_PLL_SOFT_RESET		0x1
- 
- /* Interrupt Mask register */
- #define PERF_IRQMASK_3368_REG		0xc
-+#define PERF_IRQMASK_6318_REG		0x20
- #define PERF_IRQMASK_6328_REG(x)	(0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6338_REG		0xc
- #define PERF_IRQMASK_6345_REG		0xc
-@@ -277,6 +325,7 @@
- 
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG		0x10
-+#define PERF_IRQSTAT_6318_REG		0x30
- #define PERF_IRQSTAT_6328_REG(x)	(0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6338_REG		0x10
- #define PERF_IRQSTAT_6345_REG		0x10
-@@ -288,6 +337,7 @@
- 
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368	0x14
-+#define PERF_EXTIRQ_CFG_REG_6318	0x18
- #define PERF_EXTIRQ_CFG_REG_6328	0x18
- #define PERF_EXTIRQ_CFG_REG_6338	0x14
- #define PERF_EXTIRQ_CFG_REG_6345	0x14
-@@ -322,6 +372,7 @@
- 
- /* Soft Reset register */
- #define PERF_SOFTRESET_REG		0x28
-+#define PERF_SOFTRESET_6318_REG		0x10
- #define PERF_SOFTRESET_6328_REG		0x10
- #define PERF_SOFTRESET_6358_REG		0x34
- #define PERF_SOFTRESET_6362_REG		0x10
-@@ -335,6 +386,18 @@
- #define SOFTRESET_3368_USBS_MASK	(1 << 11)
- #define SOFTRESET_3368_PCM_MASK		(1 << 13)
- 
-+#define SOFTRESET_6318_SPI_MASK		(1 << 0)
-+#define SOFTRESET_6318_EPHY_MASK	(1 << 1)
-+#define SOFTRESET_6318_SAR_MASK		(1 << 2)
-+#define SOFTRESET_6318_ENETSW_MASK	(1 << 3)
-+#define SOFTRESET_6318_USBS_MASK	(1 << 4)
-+#define SOFTRESET_6318_USBH_MASK	(1 << 5)
-+#define SOFTRESET_6318_PCIE_CORE_MASK	(1 << 6)
-+#define SOFTRESET_6318_PCIE_MASK	(1 << 7)
-+#define SOFTRESET_6318_PCIE_EXT_MASK	(1 << 8)
-+#define SOFTRESET_6318_PCIE_HARD_MASK	(1 << 9)
-+#define SOFTRESET_6318_ADSL_MASK	(1 << 10)
-+
- #define SOFTRESET_6328_SPI_MASK		(1 << 0)
- #define SOFTRESET_6328_EPHY_MASK	(1 << 1)
- #define SOFTRESET_6328_SAR_MASK		(1 << 2)
-@@ -506,8 +569,17 @@
- #define TIMER_IRQSTAT_TIMER1_IR_EN	(1 << 9)
- #define TIMER_IRQSTAT_TIMER2_IR_EN	(1 << 10)
- 
-+#define TIMER_IRQMASK_6318_REG		0x0
-+#define TIMER_IRQSTAT_6318_REG		0x4
-+#define IRQSTATMASK_TIMER0		(1 << 0)
-+#define IRQSTATMASK_TIMER1		(1 << 1)
-+#define IRQSTATMASK_TIMER2		(1 << 2)
-+#define IRQSTATMASK_TIMER3		(1 << 3)
-+#define IRQSTATMASK_WDT			(1 << 4)
-+
- /* Timer control register */
- #define TIMER_CTLx_REG(x)		(0x4 + (x * 4))
-+#define TIMER_CTRx_6318_REG(x)		(0x8 + (x * 4))
- #define TIMER_CTL0_REG			0x4
- #define TIMER_CTL1_REG			0x8
- #define TIMER_CTL2_REG			0xC
-@@ -1254,6 +1326,8 @@
- #define SDRAM_CFG_32B_MASK		(1 << SDRAM_CFG_32B_SHIFT)
- #define SDRAM_CFG_BANK_SHIFT		13
- #define SDRAM_CFG_BANK_MASK		(1 << SDRAM_CFG_BANK_SHIFT)
-+#define SDRAM_CFG_6318_SPACE_SHIFT	4
-+#define SDRAM_CFG_6318_SPACE_MASK	(0xf << SDRAM_CFG_6318_SPACE_SHIFT)
- 
- #define SDRAM_MBASE_REG			0xc
- 
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -23,6 +23,7 @@ static inline int is_bcm63xx_internal_re
- 		if (offset >= 0xfff00000)
- 			return 1;
- 		break;
-+	case BCM6318_CPU_ID:
- 	case BCM6328_CPU_ID:
- 	case BCM6362_CPU_ID:
- 	case BCM6368_CPU_ID:
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -35,7 +35,8 @@ static struct platform_device bcm63xx_hs
- 
- int __init bcm63xx_hsspi_register(void)
- {
--	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
-+	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
-+		!BCMCPU_IS_63268())
- 		return -ENODEV;
- 
- 	spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
---- a/arch/mips/bcm63xx/dev-usb-usbd.c
-+++ b/arch/mips/bcm63xx/dev-usb-usbd.c
-@@ -41,7 +41,7 @@ int __init bcm63xx_usbd_register(const s
- 		IRQ_USBD_RXDMA2, IRQ_USBD_TXDMA2 };
- 	int i;
- 
--	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-+	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6368())
- 		return 0;
- 
- 	usbd_resources[0].start = bcm63xx_regset_address(RSET_USBD);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -184,8 +184,8 @@ static int __init register_shared(void)
- 	else
- 		shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
- 
--	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
--		BCMCPU_IS_63268())
-+	if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+		BCMCPU_IS_6368() || BCMCPU_IS_63268())
- 		chan_count = 32;
- 	else if (BCMCPU_IS_6345())
- 		chan_count = 8;
-@@ -293,8 +293,8 @@ bcm63xx_enetsw_register(const struct bcm
- {
- 	int ret;
- 
--	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
--		!BCMCPU_IS_63268())
-+	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
-+		!BCMCPU_IS_6368() && !BCMCPU_IS_63268())
- 		return -ENODEV;
- 
- 	ret = register_shared();
-@@ -311,7 +311,7 @@ bcm63xx_enetsw_register(const struct bcm
- 
- 	memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd));
- 
--	if (BCMCPU_IS_6328())
-+	if (BCMCPU_IS_6318() || BCMCPU_IS_6328())
- 		enetsw_pd.num_ports = ENETSW_PORTS_6328;
- 	else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
- 		enetsw_pd.num_ports = ENETSW_PORTS_6368;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -10,6 +10,8 @@ int __init bcm63xx_gpio_init(void);
- static inline unsigned long bcm63xx_gpio_count(void)
- {
- 	switch (bcm63xx_get_cpu_id()) {
-+	case BCM6318_CPU_ID:
-+		return 50;
- 	case BCM6328_CPU_ID:
- 		return 32;
- 	case BCM3368_CPU_ID:
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -81,7 +81,8 @@ static struct platform_device bcm63xx_eh
- 
- int __init bcm63xx_ehci_register(void)
- {
--	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
-+		!BCMCPU_IS_6362() && !BCMCPU_IS_6368())
- 		return 0;
- 
- 	ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
diff --git a/target/linux/bcm63xx/patches-5.4/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch b/target/linux/bcm63xx/patches-5.4/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch
deleted file mode 100644
index e359311750..0000000000
--- a/target/linux/bcm63xx/patches-5.4/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch
+++ /dev/null
@@ -1,156 +0,0 @@
-From 4bdfacdeaf3c988c4f3256c88118893eac640b03 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 14:17:50 +0100
-Subject: [PATCH 52/53] MIPS: BCM63XX: split PCIE reset signals
-
----
- arch/mips/bcm63xx/reset.c                          | 39 ++++++++++++++--------
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h |  2 ++
- arch/mips/pci/pci-bcm63xx.c                        |  7 ++++
- 3 files changed, 34 insertions(+), 14 deletions(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -29,7 +29,9 @@
- 	[BCM63XX_RESET_PCM]		= BCM## __cpu ##_RESET_PCM,	\
- 	[BCM63XX_RESET_MPI]		= BCM## __cpu ##_RESET_MPI,	\
- 	[BCM63XX_RESET_PCIE]		= BCM## __cpu ##_RESET_PCIE,	\
--	[BCM63XX_RESET_PCIE_EXT]	= BCM## __cpu ##_RESET_PCIE_EXT,
-+	[BCM63XX_RESET_PCIE_EXT]	= BCM## __cpu ##_RESET_PCIE_EXT, \
-+	[BCM63XX_RESET_PCIE_CORE]	= BCM## __cpu ##_RESET_PCIE_CORE, \
-+	[BCM63XX_RESET_PCIE_HARD]	= BCM## __cpu ##_RESET_PCIE_HARD,
- 
- #define BCM3368_RESET_SPI	SOFTRESET_3368_SPI_MASK
- #define BCM3368_RESET_ENET	SOFTRESET_3368_ENET_MASK
-@@ -43,6 +45,8 @@
- #define BCM3368_RESET_MPI	SOFTRESET_3368_MPI_MASK
- #define BCM3368_RESET_PCIE	0
- #define BCM3368_RESET_PCIE_EXT	0
-+#define BCM3368_RESET_PCIE_CORE	0
-+#define BCM3368_RESET_PCIE_HARD	0
- 
- 
- #define BCM6318_RESET_SPI	SOFTRESET_6318_SPI_MASK
-@@ -55,11 +59,10 @@
- #define BCM6318_RESET_ENETSW	SOFTRESET_6318_ENETSW_MASK
- #define BCM6318_RESET_PCM	0
- #define BCM6318_RESET_MPI	0
--#define BCM6318_RESET_PCIE	\
--				(SOFTRESET_6318_PCIE_MASK |		\
--				 SOFTRESET_6318_PCIE_CORE_MASK |	\
--				 SOFTRESET_6318_PCIE_HARD_MASK)
-+#define BCM6318_RESET_PCIE	SOFTRESET_6318_PCIE_MASK
- #define BCM6318_RESET_PCIE_EXT	SOFTRESET_6318_PCIE_EXT_MASK
-+#define BCM6318_RESET_PCIE_CORE	SOFTRESET_6318_PCIE_CORE_MASK
-+#define BCM6318_RESET_PCIE_HARD	SOFTRESET_6318_PCIE_HARD_MASK
- 
- #define BCM6328_RESET_SPI	SOFTRESET_6328_SPI_MASK
- #define BCM6328_RESET_ENET	0
-@@ -71,11 +74,10 @@
- #define BCM6328_RESET_ENETSW	SOFTRESET_6328_ENETSW_MASK
- #define BCM6328_RESET_PCM	SOFTRESET_6328_PCM_MASK
- #define BCM6328_RESET_MPI	0
--#define BCM6328_RESET_PCIE	\
--				(SOFTRESET_6328_PCIE_MASK |		\
--				 SOFTRESET_6328_PCIE_CORE_MASK |	\
--				 SOFTRESET_6328_PCIE_HARD_MASK)
-+#define BCM6328_RESET_PCIE	SOFTRESET_6328_PCIE_MASK
- #define BCM6328_RESET_PCIE_EXT	SOFTRESET_6328_PCIE_EXT_MASK
-+#define BCM6328_RESET_PCIE_CORE	SOFTRESET_6328_PCIE_CORE_MASK
-+#define BCM6328_RESET_PCIE_HARD	SOFTRESET_6328_PCIE_HARD_MASK
- 
- #define BCM6338_RESET_SPI	SOFTRESET_6338_SPI_MASK
- #define BCM6338_RESET_ENET	SOFTRESET_6338_ENET_MASK
-@@ -89,6 +91,8 @@
- #define BCM6338_RESET_MPI	0
- #define BCM6338_RESET_PCIE	0
- #define BCM6338_RESET_PCIE_EXT	0
-+#define BCM6338_RESET_PCIE_CORE	0
-+#define BCM6338_RESET_PCIE_HARD	0
- 
- #define BCM6348_RESET_SPI	SOFTRESET_6348_SPI_MASK
- #define BCM6348_RESET_ENET	SOFTRESET_6348_ENET_MASK
-@@ -102,6 +106,8 @@
- #define BCM6348_RESET_MPI	0
- #define BCM6348_RESET_PCIE	0
- #define BCM6348_RESET_PCIE_EXT	0
-+#define BCM6348_RESET_PCIE_CORE	0
-+#define BCM6348_RESET_PCIE_HARD	0
- 
- #define BCM6358_RESET_SPI	SOFTRESET_6358_SPI_MASK
- #define BCM6358_RESET_ENET	SOFTRESET_6358_ENET_MASK
-@@ -115,6 +121,8 @@
- #define BCM6358_RESET_MPI	SOFTRESET_6358_MPI_MASK
- #define BCM6358_RESET_PCIE	0
- #define BCM6358_RESET_PCIE_EXT	0
-+#define BCM6358_RESET_PCIE_CORE	0
-+#define BCM6358_RESET_PCIE_HARD	0
- 
- #define BCM6362_RESET_SPI	SOFTRESET_6362_SPI_MASK
- #define BCM6362_RESET_ENET	0
-@@ -126,9 +134,10 @@
- #define BCM6362_RESET_ENETSW	SOFTRESET_6362_ENETSW_MASK
- #define BCM6362_RESET_PCM	SOFTRESET_6362_PCM_MASK
- #define BCM6362_RESET_MPI	0
--#define BCM6362_RESET_PCIE      (SOFTRESET_6362_PCIE_MASK | \
--				 SOFTRESET_6362_PCIE_CORE_MASK)
-+#define BCM6362_RESET_PCIE      SOFTRESET_6362_PCIE_MASK
- #define BCM6362_RESET_PCIE_EXT	SOFTRESET_6362_PCIE_EXT_MASK
-+#define BCM6362_RESET_PCIE_CORE	SOFTRESET_6362_PCIE_CORE_MASK
-+#define BCM6362_RESET_PCIE_HARD	0
- 
- #define BCM6368_RESET_SPI	SOFTRESET_6368_SPI_MASK
- #define BCM6368_RESET_ENET	0
-@@ -142,6 +151,8 @@
- #define BCM6368_RESET_MPI	SOFTRESET_6368_MPI_MASK
- #define BCM6368_RESET_PCIE	0
- #define BCM6368_RESET_PCIE_EXT	0
-+#define BCM6368_RESET_PCIE_CORE	0
-+#define BCM6368_RESET_PCIE_HARD	0
- 
- #define BCM63268_RESET_SPI	SOFTRESET_63268_SPI_MASK
- #define BCM63268_RESET_ENET	0
-@@ -153,10 +164,10 @@
- #define BCM63268_RESET_ENETSW	SOFTRESET_63268_ENETSW_MASK
- #define BCM63268_RESET_PCM	SOFTRESET_63268_PCM_MASK
- #define BCM63268_RESET_MPI	0
--#define BCM63268_RESET_PCIE	(SOFTRESET_63268_PCIE_MASK | \
--				 SOFTRESET_63268_PCIE_CORE_MASK | \
--				 SOFTRESET_63268_PCIE_HARD_MASK)
-+#define BCM63268_RESET_PCIE	SOFTRESET_63268_PCIE_MASK
- #define BCM63268_RESET_PCIE_EXT	SOFTRESET_63268_PCIE_EXT_MASK
-+#define BCM63268_RESET_PCIE_CORE	SOFTRESET_63268_PCIE_CORE_MASK
-+#define BCM63268_RESET_PCIE_HARD	SOFTRESET_63268_PCIE_HARD_MASK
- 
- /*
-  * core reset bits
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
-@@ -15,6 +15,8 @@ enum bcm63xx_core_reset {
- 	BCM63XX_RESET_MPI,
- 	BCM63XX_RESET_PCIE,
- 	BCM63XX_RESET_PCIE_EXT,
-+	BCM63XX_RESET_PCIE_CORE,
-+	BCM63XX_RESET_PCIE_HARD,
- };
- 
- void bcm63xx_core_set_reset(enum bcm63xx_core_reset, int reset);
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -135,9 +135,16 @@ static void __init bcm63xx_reset_pcie(vo
- 
- 	/* reset the PCIe core */
- 	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
- 	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
-+	if (BCMCPU_IS_6328() || BCMCPU_IS_63268()) {
-+		bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 1);
-+		mdelay(10);
-+		bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
-+	}
- 	mdelay(10);
- 
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
- 	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
- 	mdelay(10);
- 
diff --git a/target/linux/bcm63xx/patches-5.4/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch b/target/linux/bcm63xx/patches-5.4/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch
deleted file mode 100644
index 1ebb451b59..0000000000
--- a/target/linux/bcm63xx/patches-5.4/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch
+++ /dev/null
@@ -1,333 +0,0 @@
-From 11a8ab8dac4ef5d0d70199843043927edce1d4db Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:47:34 +0100
-Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318
-
----
- arch/mips/bcm63xx/clk.c                           |  25 ++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h   |   6 ++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  60 +++++++++++-
- arch/mips/pci/ops-bcm63xx.c                       |  16 +++-
- arch/mips/pci/pci-bcm63xx.c                       | 106 ++++++++++++++++++----
- 5 files changed, 184 insertions(+), 29 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -52,6 +52,18 @@ static void bcm_hwclock_set(u32 mask, in
- 	bcm_perf_writel(reg, PERF_CKCTL_REG);
- }
- 
-+static void bcm_ub_hwclock_set(u32 mask, int enable)
-+{
-+	u32 reg;
-+
-+	reg = bcm_perf_readl(PERF_UB_CKCTL_REG);
-+	if (enable)
-+		reg |= mask;
-+	else
-+		reg &= ~mask;
-+	bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
-+}
-+
- /*
-  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
-  */
-@@ -362,12 +374,17 @@ static struct clk clk_ipsec = {
- 
- static void pcie_set(struct clk *clk, int enable)
- {
--	if (BCMCPU_IS_6328())
-+	if (BCMCPU_IS_6318()) {
-+		bcm_hwclock_set(CKCTL_6318_PCIE_EN, enable);
-+		bcm_hwclock_set(CKCTL_6318_PCIE25_EN, enable);
-+		bcm_ub_hwclock_set(UB_CKCTL_6318_PCIE_EN, enable);
-+	} else if (BCMCPU_IS_6328()) {
- 		bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
--	else if (BCMCPU_IS_6362())
-+	} else if (BCMCPU_IS_6362()) {
- 		bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
--	else if (BCMCPU_IS_63268())
-+	} else if (BCMCPU_IS_63268()) {
- 		bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
-+	}
- }
- 
- static struct clk clk_pcie = {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -41,6 +41,12 @@
- #define BCM_CB_MEM_END_PA		(BCM_CB_MEM_BASE_PA +		\
- 					BCM_CB_MEM_SIZE - 1)
- 
-+#define BCM_PCIE_MEM_BASE_PA_6318	0x10200000
-+#define BCM_PCIE_MEM_SIZE_6318		(1 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_6318	(BCM_PCIE_MEM_BASE_PA_6318 +	\
-+					BCM_PCIE_MEM_SIZE_6318 - 1)
-+
-+
- #define BCM_PCIE_MEM_BASE_PA_6328	0x10f00000
- #define BCM_PCIE_MEM_SIZE_6328		(1 * 1024 * 1024)
- #define BCM_PCIE_MEM_END_PA_6328	(BCM_PCIE_MEM_BASE_PA_6328 +	\
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1530,6 +1530,17 @@
-  * _REG relative to RSET_PCIE
-  *************************************************************************/
- 
-+#define PCIE_SPECIFIC_REG		0x188
-+#define SPECIFIC_ENDIAN_MODE_BAR1_SHIFT	0
-+#define SPECIFIC_ENDIAN_MODE_BAR1_MASK	(0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_BAR2_SHIFT	2
-+#define SPECIFIC_ENDIAN_MODE_BAR2_MASK	(0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_BAR3_SHIFT	4
-+#define SPECIFIC_ENDIAN_MODE_BAR3_MASK	(0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_WORD_ALIGN	0
-+#define SPECIFIC_ENDIAN_MODE_HALFWORD_ALIGN 1
-+#define SPECIFIC_ENDIAN_MODE_BYTE_ALIGN	2
-+
- #define PCIE_CONFIG2_REG		0x408
- #define CONFIG2_BAR1_SIZE_EN		1
- #define CONFIG2_BAR1_SIZE_MASK		0xf
-@@ -1575,7 +1586,54 @@
- #define PCIE_RC_INT_C			(1 << 2)
- #define PCIE_RC_INT_D			(1 << 3)
- 
--#define PCIE_DEVICE_OFFSET		0x8000
-+#define PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG	0x400c
-+#define C2P_MEM_WIN_ENDIAN_MODE_MASK	0x3
-+#define C2P_MEM_WIN_ENDIAN_NO_SWAP	0
-+#define C2P_MEM_WIN_ENDIAN_HALF_WORD_SWAP 1
-+#define C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP 2
-+#define C2P_MEM_WIN_BASE_ADDR_SHIFT	20
-+#define C2P_MEM_WIN_BASE_ADDR_MASK	(0xfff << C2P_MEM_WIN_BASE_ADDR_SHIFT)
-+
-+#define PCIE_RC_BAR1_CONFIG_LO_REG	0x402c
-+#define RC_BAR_CFG_LO_SIZE_256MB	0xd
-+#define RC_BAR_CFG_LO_MATCH_ADDR_SHIFT	20
-+#define RC_BAR_CFG_LO_MATCH_ADDR_MASK	(0xfff << RC_BAR_CFG_LO_MATCH_ADDR_SHIFT)
-+
-+#define PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG 0x4070
-+#define C2P_BASELIMIT_LIMIT_SHIFT	20
-+#define C2P_BASELIMIT_LIMIT_MASK	(0xfff << C2P_BASELIMIT_LIMIT_SHIFT)
-+#define C2P_BASELIMIT_BASE_SHIFT	4
-+#define C2P_BASELIMIT_BASE_MASK		(0xfff << C2P_BASELIMIT_BASE_SHIFT)
-+
-+#define PCIE_UBUS_BAR1_CFG_REMAP_REG	0x4088
-+#define BAR1_CFG_REMAP_OFFSET_SHIFT	20
-+#define BAR1_CFG_REMAP_OFFSET_MASK	(0xfff << BAR1_CFG_REMAP_OFFSET_SHIFT)
-+#define BAR1_CFG_REMAP_ACCESS_EN	1
-+
-+#define PCIE_HARD_DEBUG_REG		0x4204
-+#define HARD_DEBUG_SERDES_IDDQ		(1 << 23)
-+
-+#define PCIE_CPU_INT1_MASK_CLEAR_REG	0x830c
-+#define CPU_INT_PCIE_ERR_ATTN_CPU	(1 << 0)
-+#define CPU_INT_PCIE_INTA		(1 << 1)
-+#define CPU_INT_PCIE_INTB		(1 << 2)
-+#define CPU_INT_PCIE_INTC		(1 << 3)
-+#define CPU_INT_PCIE_INTD		(1 << 4)
-+#define CPU_INT_PCIE_INTR		(1 << 5)
-+#define CPU_INT_PCIE_NMI		(1 << 6)
-+#define CPU_INT_PCIE_UBUS		(1 << 7)
-+#define CPU_INT_IPI			(1 << 8)
-+
-+#define PCIE_EXT_CFG_INDEX_REG		0x8400
-+#define EXT_CFG_FUNC_NUM_SHIFT		12
-+#define EXT_CFG_FUNC_NUM_MASK		(0x7 << EXT_CFG_FUNC_NUM_SHIFT)
-+#define EXT_CFG_DEV_NUM_SHIFT		15
-+#define EXT_CFG_DEV_NUM_MASK		(0xf << EXT_CFG_DEV_NUM_SHIFT)
-+#define EXT_CFG_BUS_NUM_SHIFT		20
-+#define EXT_CFG_BUS_NUM_MASK		(0xff << EXT_CFG_BUS_NUM_SHIFT)
-+
-+#define PCIE_DEVICE_OFFSET_6318		0x9000
-+#define PCIE_DEVICE_OFFSET_6328		0x8000
- 
- /*************************************************************************
-  * _REG relative to RSET_OTP
---- a/arch/mips/pci/ops-bcm63xx.c
-+++ b/arch/mips/pci/ops-bcm63xx.c
-@@ -489,8 +489,12 @@ static int bcm63xx_pcie_read(struct pci_
- 	if (!bcm63xx_pcie_can_access(bus, devfn))
- 		return PCIBIOS_DEVICE_NOT_FOUND;
- 
--	if (bus->number == PCIE_BUS_DEVICE)
--		reg += PCIE_DEVICE_OFFSET;
-+	if (bus->number == PCIE_BUS_DEVICE) {
-+		if (BCMCPU_IS_6318())
-+			reg += PCIE_DEVICE_OFFSET_6318;
-+		else
-+			reg += PCIE_DEVICE_OFFSET_6328;
-+	}
- 
- 	data = bcm_pcie_readl(reg);
- 
-@@ -509,8 +513,12 @@ static int bcm63xx_pcie_write(struct pci
- 	if (!bcm63xx_pcie_can_access(bus, devfn))
- 		return PCIBIOS_DEVICE_NOT_FOUND;
- 
--	if (bus->number == PCIE_BUS_DEVICE)
--		reg += PCIE_DEVICE_OFFSET;
-+	if (bus->number == PCIE_BUS_DEVICE) {
-+		if (BCMCPU_IS_6318())
-+			reg += PCIE_DEVICE_OFFSET_6318;
-+		else
-+			reg += PCIE_DEVICE_OFFSET_6328;
-+	}
- 
- 
- 	data = bcm_pcie_readl(reg);
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -118,7 +118,7 @@ static void bcm63xx_int_cfg_writel(u32 v
- 
- void __iomem *pci_iospace_start;
- 
--static void __init bcm63xx_reset_pcie(void)
-+static void __init bcm63xx_reset_pcie_gen1(void)
- {
- 	u32 val;
- 	u32 reg;
-@@ -152,20 +152,32 @@ static void __init bcm63xx_reset_pcie(vo
- 	mdelay(200);
- }
- 
--static struct clk *pcie_clk;
--
--static int __init bcm63xx_register_pcie(void)
-+static void __init bcm63xx_reset_pcie_gen2(void)
- {
- 	u32 val;
- 
--	/* enable clock */
--	pcie_clk = clk_get(NULL, "pcie");
--	if (IS_ERR_OR_NULL(pcie_clk))
--		return -ENODEV;
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
- 
--	clk_prepare_enable(pcie_clk);
-+	/* reset the PCIe core */
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
-+	mdelay(10);
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0);
-+	mdelay(10);
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
-+	mdelay(10);
-+	val = bcm_pcie_readl(PCIE_HARD_DEBUG_REG);
-+	val &= ~HARD_DEBUG_SERDES_IDDQ;
-+	bcm_pcie_writel(val, PCIE_HARD_DEBUG_REG);
-+	mdelay(10);
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
-+	mdelay(200);
-+}
- 
--	bcm63xx_reset_pcie();
-+static void __init bcm63xx_init_pcie_gen1(void)
-+{
-+	u32 val;
- 
- 	/* configure the PCIe bridge */
- 	val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
-@@ -190,6 +202,65 @@ static int __init bcm63xx_register_pcie(
- 	val |= OPT2_CFG_TYPE1_BD_SEL;
- 	bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
- 
-+	/* set bar0 to little endian */
-+	val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
-+	val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
-+	val |= BASEMASK_REMAP_EN;
-+	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
-+
-+	val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
-+	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
-+}
-+
-+static void __init bcm63xx_init_pcie_gen2(void)
-+{
-+	u32 val;
-+
-+	bcm_pcie_writel(CPU_INT_PCIE_INTA | CPU_INT_PCIE_INTB |
-+			CPU_INT_PCIE_INTC | CPU_INT_PCIE_INTD,
-+			PCIE_CPU_INT1_MASK_CLEAR_REG);
-+
-+	val = bcm_pcie_mem_resource.end & C2P_BASELIMIT_LIMIT_MASK;
-+	val |= (bcm_pcie_mem_resource.start >> C2P_BASELIMIT_LIMIT_SHIFT) <<
-+	       C2P_BASELIMIT_BASE_SHIFT;
-+
-+	bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG);
-+
-+	/* set bar0 to little endian */
-+	val = bcm_pcie_readl(PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
-+	val |= bcm_pcie_mem_resource.start & C2P_MEM_WIN_BASE_ADDR_MASK;
-+	val |= C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP;
-+	bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
-+
-+	bcm_pcie_writel(SPECIFIC_ENDIAN_MODE_BYTE_ALIGN, PCIE_SPECIFIC_REG);
-+	bcm_pcie_writel(RC_BAR_CFG_LO_SIZE_256MB, PCIE_RC_BAR1_CONFIG_LO_REG);
-+	bcm_pcie_writel(BAR1_CFG_REMAP_ACCESS_EN, PCIE_UBUS_BAR1_CFG_REMAP_REG);
-+
-+	bcm_pcie_writel(PCIE_BUS_DEVICE << EXT_CFG_BUS_NUM_SHIFT,
-+			PCIE_EXT_CFG_INDEX_REG);
-+}
-+
-+static struct clk *pcie_clk;
-+
-+static int __init bcm63xx_register_pcie(void)
-+{
-+	u32 val;
-+
-+	/* enable clock */
-+	pcie_clk = clk_get(NULL, "pcie");
-+	if (IS_ERR_OR_NULL(pcie_clk))
-+		return -ENODEV;
-+
-+	clk_prepare_enable(pcie_clk);
-+
-+	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-+		bcm63xx_reset_pcie_gen1();
-+		bcm63xx_init_pcie_gen1();
-+	} else {
-+		bcm63xx_reset_pcie_gen2();
-+		bcm63xx_init_pcie_gen2();
-+	}
-+
- 	/* setup class code as bridge */
- 	val = bcm_pcie_readl(PCIE_IDVAL3_REG);
- 	val &= ~IDVAL3_CLASS_CODE_MASK;
-@@ -201,15 +272,6 @@ static int __init bcm63xx_register_pcie(
- 	val &= ~CONFIG2_BAR1_SIZE_MASK;
- 	bcm_pcie_writel(val, PCIE_CONFIG2_REG);
- 
--	/* set bar0 to little endian */
--	val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
--	val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
--	val |= BASEMASK_REMAP_EN;
--	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
--
--	val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
--	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
--
- 	register_pci_controller(&bcm63xx_pcie_controller);
- 
- 	return 0;
-@@ -341,7 +403,10 @@ static int __init bcm63xx_pci_init(void)
- 	if (!bcm63xx_pci_enabled)
- 		return -ENODEV;
- 
--	if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+	if (BCMCPU_IS_6318()) {
-+		bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6318;
-+		bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6318;
-+	} if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
- 		bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
- 		bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
- 	} else if (BCMCPU_IS_63268()) {
-@@ -350,6 +415,7 @@ static int __init bcm63xx_pci_init(void)
- 	}
- 
- 	switch (bcm63xx_get_cpu_id()) {
-+	case BCM6318_CPU_ID:
- 	case BCM6328_CPU_ID:
- 	case BCM6362_CPU_ID:
- 	case BCM63268_CPU_ID:
diff --git a/target/linux/bcm63xx/patches-5.4/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch b/target/linux/bcm63xx/patches-5.4/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch
deleted file mode 100644
index cbe095c038..0000000000
--- a/target/linux/bcm63xx/patches-5.4/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 9a97177b907330971aa7bf41855fafc2602e1c18 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Dec 2013 12:26:57 +0100
-Subject: [PATCH 51/56] MIPS: BCM63XX: detect flash type early and store the
- result
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                          | 10 +++++++---
- arch/mips/bcm63xx/prom.c                               |  4 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
- 3 files changed, 13 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -22,6 +22,8 @@
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
- 
-+static int flash_type;
-+
- static struct mtd_partition mtd_partitions[] = {
- 	{
- 		.name		= "cfe",
-@@ -109,13 +111,15 @@ static int __init bcm63xx_detect_flash_t
- 	}
- }
- 
-+void __init bcm63xx_flash_detect(void)
-+{
-+	flash_type = bcm63xx_detect_flash_type();
-+}
-+
- int __init bcm63xx_flash_register(void)
- {
--	int flash_type;
- 	u32 val;
- 
--	flash_type = bcm63xx_detect_flash_type();
--
- 	switch (flash_type) {
- 	case BCM63XX_FLASH_TYPE_PARALLEL:
- 		/* read base address of boot chip select (0) */
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -17,6 +17,7 @@
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
-+#include <bcm63xx_dev_flash.h>
- 
- void __init prom_init(void)
- {
-@@ -52,6 +53,9 @@ void __init prom_init(void)
- 	reg &= ~mask;
- 	bcm_perf_writel(reg, PERF_CKCTL_REG);
- 
-+	/* detect and setup flash access */
-+	bcm63xx_flash_detect();
-+
- 	/* do low level board init */
- 	board_prom_init();
- 
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -8,6 +8,8 @@ enum {
- 	BCM63XX_FLASH_TYPE_NAND,
- };
- 
-+void bcm63xx_flash_detect(void);
-+
- int __init bcm63xx_flash_register(void);
- 
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/bcm63xx/patches-5.4/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch b/target/linux/bcm63xx/patches-5.4/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
deleted file mode 100644
index 91dae6e3d8..0000000000
--- a/target/linux/bcm63xx/patches-5.4/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 1cacd0f7b0d35f8e3d3f8a69ecb3b5e436d6b9e8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Dec 2013 13:25:25 +0100
-Subject: [PATCH 52/56] MIPS: BCM63XX: fixup mapped SPI flash access on boot
-
-Some bootloaders leave the flash access in an invalid state with dual
-read enabled; fix it by disabling it and falling back to simple fast
-reads.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c | 51 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 51 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -16,6 +16,7 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
-+#include <linux/mtd/spi-nor.h>
- 
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
-@@ -111,9 +112,59 @@ static int __init bcm63xx_detect_flash_t
- 	}
- }
- 
-+#define HSSPI_FLASH_CTRL_REG		0x14
-+#define FLASH_CTRL_READ_OPCODE_MASK	0xff
-+#define FLASH_CTRL_ADDR_BYTES_MASK	(0x3 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_2		(0 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_3		(1 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_4		(2 << 8)
-+#define FLASH_CTRL_DUMMY_BYTES_SHIFT	10
-+#define FLASH_CTRL_DUMMY_BYTES_MASK	(0x3 << FLASH_CTRL_DUMMY_BYTES_SHIFT)
-+#define FLASH_CTRL_MB_EN		(1 << 23)
-+
- void __init bcm63xx_flash_detect(void)
- {
- 	flash_type = bcm63xx_detect_flash_type();
-+
-+	/* ensure flash mapping has sane values */
-+	if (flash_type == BCM63XX_FLASH_TYPE_SERIAL &&
-+	    (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+	     BCMCPU_IS_63268())) {
-+		u32 val = bcm_rset_readl(RSET_HSSPI, HSSPI_FLASH_CTRL_REG);
-+
-+		if (val & FLASH_CTRL_MB_EN) {
-+			/* cfe might configure non working dual-io mode */
-+			val &= ~FLASH_CTRL_MB_EN;
-+			val &= ~FLASH_CTRL_READ_OPCODE_MASK;
-+			val &= ~FLASH_CTRL_DUMMY_BYTES_MASK;
-+			val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT;
-+
-+			switch (val & FLASH_CTRL_ADDR_BYTES_MASK) {
-+			case FLASH_CTRL_ADDR_BYTES_3:
-+				val |= SPINOR_OP_READ_FAST;
-+				break;
-+			case FLASH_CTRL_ADDR_BYTES_4:
-+				val |= SPINOR_OP_READ_FAST_4B;
-+				break;
-+			case FLASH_CTRL_ADDR_BYTES_2:
-+			default:
-+				pr_warn("unsupported address byte mode (%x), not fixing up\n",
-+					val & FLASH_CTRL_ADDR_BYTES_MASK);
-+				return;
-+			}
-+		} else {
-+			/* ensure dummy bytes is set to 1 for _FAST reads */
-+			u8 cmd = val & FLASH_CTRL_READ_OPCODE_MASK;
-+
-+			if (cmd != SPINOR_OP_READ_FAST && cmd != SPINOR_OP_READ_FAST_4B)
-+				return;
-+
-+			val &= ~FLASH_CTRL_DUMMY_BYTES_MASK;
-+			val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT;
-+		}
-+
-+		bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG);
-+	}
- }
- 
- int __init bcm63xx_flash_register(void)
diff --git a/target/linux/bcm63xx/patches-5.4/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch b/target/linux/bcm63xx/patches-5.4/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch
deleted file mode 100644
index a8eea5b119..0000000000
--- a/target/linux/bcm63xx/patches-5.4/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -168,7 +168,11 @@ static struct clk clk_swpkt_usb = {
-  */
- static void enetsw_set(struct clk *clk, int enable)
- {
--	if (BCMCPU_IS_6328()) {
-+	if (BCMCPU_IS_6318()) {
-+		bcm_hwclock_set(CKCTL_6318_ROBOSW250_EN |
-+				CKCTL_6318_ROBOSW025_EN, enable);
-+		bcm_ub_hwclock_set(UB_CKCTL_6318_ROBOSW_EN, enable);
-+	} else if (BCMCPU_IS_6328()) {
- 		bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
- 	} else if (BCMCPU_IS_6362()) {
- 		bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
-@@ -220,18 +224,22 @@ static struct clk clk_pcm = {
-  */
- static void usbh_set(struct clk *clk, int enable)
- {
--	if (BCMCPU_IS_6328())
-+	if (BCMCPU_IS_6318()) {
-+		bcm_hwclock_set(CKCTL_6318_USB_EN, enable);
-+		bcm_ub_hwclock_set(UB_CKCTL_6318_USB_EN, enable);
-+	} else if (BCMCPU_IS_6328()) {
- 		bcm_hwclock_set(CKCTL_6328_USBH_EN, enable);
--	else if (BCMCPU_IS_6348())
-+	} else if (BCMCPU_IS_6348()) {
- 		bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
--	else if (BCMCPU_IS_6362())
-+	} else if (BCMCPU_IS_6362()) {
- 		bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
--	else if (BCMCPU_IS_6368())
-+	} else if (BCMCPU_IS_6368()) {
- 		bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
--	else if (BCMCPU_IS_63268())
-+	} else if (BCMCPU_IS_63268()) {
- 		bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
--	else
-+	} else {
- 		return;
-+	}
- 
- 	if (enable)
- 		msleep(100);
diff --git a/target/linux/bcm63xx/patches-5.4/347-MIPS-BCM6318-USB-support.patch b/target/linux/bcm63xx/patches-5.4/347-MIPS-BCM6318-USB-support.patch
deleted file mode 100644
index 15d4679670..0000000000
--- a/target/linux/bcm63xx/patches-5.4/347-MIPS-BCM6318-USB-support.patch
+++ /dev/null
@@ -1,124 +0,0 @@
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -109,6 +109,27 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
- 		reg |= USBH_PRIV_SETUP_IOC_MASK;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+	} else if (BCMCPU_IS_6318()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+		reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-+		reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
-+		reg |= USBH_PRIV_SETUP_IOC_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+		reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-+		reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
- 	}
- 
- 	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-@@ -144,6 +165,27 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
- 		reg |= USBH_PRIV_SETUP_IOC_MASK;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+	} else if (BCMCPU_IS_6318()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+		reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-+		reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
-+		reg |= USBH_PRIV_SETUP_IOC_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+		reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-+		reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
- 	}
- 
- 	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -682,6 +682,12 @@
- #define GPIO_MODE_6368_SPI_SSN4		(1 << 30)
- #define GPIO_MODE_6368_SPI_SSN5		(1 << 31)
- 
-+#define GPIO_PINMUX_SEL0_6318		0x1c
-+#define GPIO_PINMUX_SEL0_GPIO13_SHIFT	26
-+#define GPIO_PINMUX_SEL0_GPIO13_MASK	(0x3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_PWRON	(1 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_LED	(2 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_GPIO	(3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
- 
- #define GPIO_PINMUX_OTHR_REG		0x24
- #define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12
-@@ -1000,6 +1006,7 @@
- 
- #define USBH_PRIV_SWAP_6358_REG		0x0
- #define USBH_PRIV_SWAP_6368_REG		0x1c
-+#define USBH_PRIV_SWAP_6318_REG		0x0c
- 
- #define USBH_PRIV_SWAP_USBD_SHIFT	6
- #define USBH_PRIV_SWAP_USBD_MASK	(1 << USBH_PRIV_SWAP_USBD_SHIFT)
-@@ -1025,6 +1032,13 @@
- #define USBH_PRIV_SETUP_IOC_SHIFT	4
- #define USBH_PRIV_SETUP_IOC_MASK	(1 << USBH_PRIV_SETUP_IOC_SHIFT)
- 
-+#define USBH_PRIV_SETUP_6318_REG	0x00
-+#define USBH_PRIV_PLL_CTRL1_6318_REG	0x04
-+#define USBH_PRIV_PLL_CTRL1_SUSP_EN	(1 << 27)
-+#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN	(1 << 31)
-+#define USBH_PRIV_SIM_CTRL_6318_REG	0x20
-+#define USBH_PRIV_SIM_CTRL_LADDR_SEL	(1 << 5)
-+
- 
- /*************************************************************************
-  * _REG relative to RSET_USBD
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -125,6 +125,15 @@ void __init board_early_setup(const stru
- 	}
- 
- 	bcm_gpio_writel(val, GPIO_MODE_REG);
-+
-+#if IS_ENABLED(CONFIG_USB)
-+	if (BCMCPU_IS_6318() && (board.has_ehci0 || board.has_ohci0)) {
-+		val = bcm_gpio_readl(GPIO_PINMUX_SEL0_6318);
-+		val &= ~GPIO_PINMUX_SEL0_GPIO13_MASK;
-+		val |= GPIO_PINMUX_SEL0_GPIO13_PWRON;
-+		bcm_gpio_writel(val, GPIO_PINMUX_SEL0_6318);
-+	}
-+#endif
- }
- 
- 
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -23,6 +23,8 @@ config BCM63XX_CPU_6318
- 	bool "support 6318 CPU"
- 	select SYS_HAS_CPU_BMIPS32_3300
- 	select HAVE_PCI
-+	select BCM63XX_OHCI
-+	select BCM63XX_EHCI
- 
- config BCM63XX_CPU_6328
- 	bool "support 6328 CPU"
diff --git a/target/linux/bcm63xx/patches-5.4/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch b/target/linux/bcm63xx/patches-5.4/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch
deleted file mode 100644
index cdff8d5a4d..0000000000
--- a/target/linux/bcm63xx/patches-5.4/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -587,6 +587,9 @@
- #define TIMER_CTL_MONOTONIC_MASK	(1 << 30)
- #define TIMER_CTL_ENABLE_MASK		(1 << 31)
- 
-+/* Clock reset control (63268 only) */
-+#define TIMER_CLK_RST_CTL_REG		0x2c
-+#define CLK_RST_CTL_USB_REF_CLK_EN	(1 << 18)
- 
- /*************************************************************************
-  * _REG relative to RSET_WDT
-@@ -1534,6 +1537,11 @@
- #define STRAPBUS_63268_FCVO_SHIFT	21
- #define STRAPBUS_63268_FCVO_MASK	(0xf << STRAPBUS_63268_FCVO_SHIFT)
- 
-+#define MISC_IDDQ_CTRL_6328_REG		0x48
-+#define MISC_IDDQ_CTRL_63268_REG	0x4c
-+
-+#define IDDQ_CTRL_63268_USBH		(1 << 4)
-+
- #define MISC_STRAPBUS_6328_REG		0x240
- #define STRAPBUS_6328_FCVO_SHIFT	7
- #define STRAPBUS_6328_FCVO_MASK		(0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -64,6 +64,26 @@ static void bcm_ub_hwclock_set(u32 mask,
- 	bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
- }
- 
-+static void bcm_misc_iddq_set(u32 mask, int enable)
-+{
-+	u32 offset;
-+	u32 reg;
-+
-+	if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
-+		offset = MISC_IDDQ_CTRL_6328_REG;
-+	else if (BCMCPU_IS_63268())
-+		offset = MISC_IDDQ_CTRL_63268_REG;
-+	else
-+		return;
-+
-+	reg = bcm_misc_readl(offset);
-+	if (enable)
-+		reg &= ~mask;
-+	else
-+		reg |= mask;
-+	bcm_misc_writel(reg, offset);
-+}
-+
- /*
-  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
-  */
-@@ -236,7 +256,17 @@ static void usbh_set(struct clk *clk, in
- 	} else if (BCMCPU_IS_6368()) {
- 		bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
- 	} else if (BCMCPU_IS_63268()) {
-+		u32 reg;
-+
- 		bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
-+		bcm_misc_iddq_set(IDDQ_CTRL_63268_USBH, enable);
-+		bcm63xx_core_set_reset(BCM63XX_RESET_USBH, !enable);
-+		reg = bcm_timer_readl(TIMER_CLK_RST_CTL_REG);
-+		if (enable)
-+			reg |= CLK_RST_CTL_USB_REF_CLK_EN;
-+		else
-+			reg &= ~CLK_RST_CTL_USB_REF_CLK_EN;
-+		bcm_timer_writel(reg, TIMER_CLK_RST_CTL_REG);
- 	} else {
- 		return;
- 	}
diff --git a/target/linux/bcm63xx/patches-5.4/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch b/target/linux/bcm63xx/patches-5.4/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch
deleted file mode 100644
index 3f98ddfdc3..0000000000
--- a/target/linux/bcm63xx/patches-5.4/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch
+++ /dev/null
@@ -1,117 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1034,11 +1034,18 @@
- #define USBH_PRIV_SETUP_6368_REG	0x28
- #define USBH_PRIV_SETUP_IOC_SHIFT	4
- #define USBH_PRIV_SETUP_IOC_MASK	(1 << USBH_PRIV_SETUP_IOC_SHIFT)
-+#define USBH_PRIV_SETUP_IPP_SHIFT	5
-+#define USBH_PRIV_SETUP_IPP_MASK	(1 << USBH_PRIV_SETUP_IPP_SHIFT)
- 
- #define USBH_PRIV_SETUP_6318_REG	0x00
-+#define USBH_PRIV_PLL_CTRL1_6368_REG	0x18
- #define USBH_PRIV_PLL_CTRL1_6318_REG	0x04
--#define USBH_PRIV_PLL_CTRL1_SUSP_EN	(1 << 27)
--#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN	(1 << 31)
-+
-+#define USBH_PRIV_PLL_CTRL1_6318_SUSP_EN	(1 << 27)
-+#define USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN	(1 << 31)
-+#define USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN	(1 << 9)
-+#define USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY	(1 << 10)
-+
- #define USBH_PRIV_SIM_CTRL_6318_REG	0x20
- #define USBH_PRIV_SIM_CTRL_LADDR_SEL	(1 << 5)
- 
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -73,6 +73,8 @@ config BCM63XX_CPU_63268
- 	bool "support 63268 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HAVE_PCI
-+	select BCM63XX_OHCI
-+	select BCM63XX_EHCI
- endmenu
- 
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -82,7 +82,7 @@ static struct platform_device bcm63xx_eh
- int __init bcm63xx_ehci_register(void)
- {
- 	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
--		!BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+		!BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
- 		return 0;
- 
- 	ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -109,9 +109,24 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
- 		reg |= USBH_PRIV_SETUP_IOC_MASK;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+	} else if (BCMCPU_IS_63268()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+		reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+		reg |= USBH_PRIV_SETUP_IOC_MASK;
-+		reg &= ~USBH_PRIV_SETUP_IPP_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
-+		reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
-+			 USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
- 	} else if (BCMCPU_IS_6318()) {
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--		reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+		reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
- 
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-@@ -124,7 +139,7 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
- 
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--		reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+		reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
- 
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-@@ -165,9 +180,24 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
- 		reg |= USBH_PRIV_SETUP_IOC_MASK;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+	} else if (BCMCPU_IS_63268()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+		reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+		reg |= USBH_PRIV_SETUP_IOC_MASK;
-+		reg &= ~USBH_PRIV_SETUP_IPP_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
-+		reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
-+			 USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
- 	} else if (BCMCPU_IS_6318()) {
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--		reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+		reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
- 
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-@@ -180,7 +210,7 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
- 
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--		reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+		reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
- 
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
diff --git a/target/linux/bcm63xx/patches-5.4/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch b/target/linux/bcm63xx/patches-5.4/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
deleted file mode 100644
index 35c2ef63ee..0000000000
--- a/target/linux/bcm63xx/patches-5.4/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
+++ /dev/null
@@ -1,108 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -40,6 +40,7 @@ struct board_info {
- 
- 	/* USB config */
- 	struct bcm63xx_usbd_platform_data usbd;
-+	unsigned int num_usbh_ports:2;
- 
- 	/* GPIO LEDs */
- 	struct gpio_led leds[5];
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -1,6 +1,6 @@
- #ifndef BCM63XX_DEV_USB_EHCI_H_
- #define BCM63XX_DEV_USB_EHCI_H_
- 
--int bcm63xx_ehci_register(void);
-+int bcm63xx_ehci_register(unsigned int num_ports);
- 
- #endif /* BCM63XX_DEV_USB_EHCI_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -1,6 +1,6 @@
- #ifndef BCM63XX_DEV_USB_OHCI_H_
- #define BCM63XX_DEV_USB_OHCI_H_
- 
--int bcm63xx_ohci_register(void);
-+int bcm63xx_ohci_register(unsigned int num_ports);
- 
- #endif /* BCM63XX_DEV_USB_OHCI_H_ */
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -165,6 +165,8 @@ static struct platform_device bcm63xx_gp
-  */
- int __init board_register_devices(void)
- {
-+	int usbh_ports = 0;
-+
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
- 
-@@ -186,14 +188,21 @@ int __init board_register_devices(void)
- 	    !board_get_mac_address(board.enetsw.mac_addr))
- 		bcm63xx_enetsw_register(&board.enetsw);
- 
-+	if ((board.has_ohci0 || board.has_ehci0)) {
-+		usbh_ports = board.num_usbh_ports;
-+
-+		if (!usbh_ports || WARN_ON(usbh_ports > 1 && board.has_usbd))
-+			usbh_ports = 1;
-+	}
-+
- 	if (board.has_usbd)
- 		bcm63xx_usbd_register(&board.usbd);
- 
- 	if (board.has_ehci0)
--		bcm63xx_ehci_register();
-+		bcm63xx_ehci_register(usbh_ports);
- 
- 	if (board.has_ohci0)
--		bcm63xx_ohci_register();
-+		bcm63xx_ohci_register(usbh_ports);
- 
- 	/* Generate MAC address for WLAN and register our SPROM,
- 	 * do this after registering enet devices
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -79,12 +79,14 @@ static struct platform_device bcm63xx_eh
- 	},
- };
- 
--int __init bcm63xx_ehci_register(void)
-+int __init bcm63xx_ehci_register(unsigned int num_ports)
- {
- 	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
- 		!BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
- 		return 0;
- 
-+	bcm63xx_ehci_pdata.num_ports = num_ports;	
-+
- 	ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
- 	ehci_resources[0].end = ehci_resources[0].start;
- 	ehci_resources[0].end += RSET_EHCI_SIZE - 1;
---- a/arch/mips/bcm63xx/dev-usb-ohci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -62,7 +62,6 @@ static struct usb_ohci_pdata bcm63xx_ohc
- 	.big_endian_desc	= 1,
- 	.big_endian_mmio	= 1,
- 	.no_big_frame_no	= 1,
--	.num_ports		= 1,
- 	.power_on		= bcm63xx_ohci_power_on,
- 	.power_off		= bcm63xx_ohci_power_off,
- 	.power_suspend		= bcm63xx_ohci_power_off,
-@@ -80,11 +79,13 @@ static struct platform_device bcm63xx_oh
- 	},
- };
- 
--int __init bcm63xx_ohci_register(void)
-+int __init bcm63xx_ohci_register(unsigned int num_ports)
- {
- 	if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
- 		return -ENODEV;
- 
-+	bcm63xx_ohci_pdata.num_ports = num_ports;
-+
- 	ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
- 	ohci_resources[0].end = ohci_resources[0].start;
- 	ohci_resources[0].end += RSET_OHCI_SIZE - 1;
diff --git a/target/linux/bcm63xx/patches-5.4/351-set-board-usbh-ports.patch b/target/linux/bcm63xx/patches-5.4/351-set-board-usbh-ports.patch
deleted file mode 100644
index 2543ad7922..0000000000
--- a/target/linux/bcm63xx/patches-5.4/351-set-board-usbh-ports.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -574,6 +574,7 @@ static struct board_info __initdata boar
- 	.has_ohci0 = 1,
- 	.has_pccard = 1,
- 	.has_ehci0 = 1,
-+	.num_usbh_ports			= 2,
- 
- 	.leds = {
- 		{
diff --git a/target/linux/bcm63xx/patches-5.4/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch b/target/linux/bcm63xx/patches-5.4/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch
deleted file mode 100644
index 6301f73bca..0000000000
--- a/target/linux/bcm63xx/patches-5.4/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 0daf361ea799fba0af5a232036d0f06cea85ad24 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Jun 2014 12:47:49 +0200
-Subject: [PATCH 42/44] MIPS: BCM63XX: allow building support for more than one
- board type
-
-Use the arguments passed to the kernel to detect being booted with
-CFE as the indicator for bcm963xx board support, allowing the
-non presence of CFE_EPTSEAL to assume a different board type.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Kconfig          |  7 +++----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  2 +-
- arch/mips/bcm63xx/boards/board_common.c   | 13 +++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |  6 ++++++
- 4 files changed, 23 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -1,11 +1,10 @@
- # SPDX-License-Identifier: GPL-2.0
--choice
--	prompt "Board support"
-+menu "Board support"
- 	depends on BCM63XX
--	default BOARD_BCM963XX
- 
- config BOARD_BCM963XX
- 	bool "Generic Broadcom 963xx boards"
- 	select SSB
-+	default y
- 
--endchoice
-+endmenu
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -683,7 +683,7 @@ static const struct board_info __initcon
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
--void __init board_prom_init(void)
-+void __init board_bcm963xx_init(void)
- {
- 	unsigned int i;
- 	u8 *boot_addr, *cfe;
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -13,6 +13,8 @@
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
- #include <asm/addrspace.h>
-+#include <asm/bootinfo.h>
-+#include <asm/fw/cfe/cfe_api.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_uart.h>
-@@ -30,6 +32,8 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
- 
-+#include "board_common.h"
-+
- #define PFX	"board: "
- 
- static struct board_info board;
-@@ -80,6 +84,15 @@ const char *board_get_name(void)
- 	return board.name;
- }
- 
-+void __init board_prom_init(void)
-+{
-+	/* detect bootloader */
-+	if (fw_arg3 == CFE_EPTSEAL)
-+		board_bcm963xx_init();
-+	else
-+		panic("unsupported bootloader detected");
-+}
-+
- static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
- 
- /*
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -6,4 +6,10 @@
- void board_early_setup(const struct board_info *board,
- 		       int (*get_mac_address)(u8 mac[ETH_ALEN]));
- 
-+#if defined(CONFIG_BOARD_BCM963XX)
-+void board_bcm963xx_init(void);
-+#else
-+static inline void board_bcm963xx_init(void) { }
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-5.4/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch b/target/linux/bcm63xx/patches-5.4/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch
deleted file mode 100644
index bf1c4a2842..0000000000
--- a/target/linux/bcm63xx/patches-5.4/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 8a30097a899b975709f728666d5ad20c8b832d21 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:28:14 +0100
-Subject: [PATCH 43/44] MIPS: BCM63XX: allow board implementations to force
- flash address
-
-Allow board implementations to force the physmap address.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                         | 19 ++++++++++++++-----
- .../mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
- 2 files changed, 16 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -58,6 +58,12 @@ static struct platform_device mtd_dev =
- 	},
- };
- 
-+void __init bcm63xx_flash_force_phys_base_address(u32 start, u32 end)
-+{
-+	mtd_resources[0].start = start;
-+	mtd_resources[0].end = end;
-+}
-+
- static int __init bcm63xx_detect_flash_type(void)
- {
- 	u32 val;
-@@ -173,12 +179,15 @@ int __init bcm63xx_flash_register(void)
- 
- 	switch (flash_type) {
- 	case BCM63XX_FLASH_TYPE_PARALLEL:
--		/* read base address of boot chip select (0) */
--		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
--		val &= MPI_CSBASE_BASE_MASK;
- 
--		mtd_resources[0].start = val;
--		mtd_resources[0].end = 0x1FFFFFFF;
-+		if (!mtd_resources[0].start) {
-+			/* read base address of boot chip select (0) */
-+			val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+			val &= MPI_CSBASE_BASE_MASK;
-+
-+			mtd_resources[0].start = val;
-+			mtd_resources[0].end = 0x1FFFFFFF;
-+		}
- 
- 		return platform_device_register(&mtd_dev);
- 	case BCM63XX_FLASH_TYPE_SERIAL:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -10,6 +10,8 @@ enum {
- 
- void bcm63xx_flash_detect(void);
- 
-+void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
-+
- int __init bcm63xx_flash_register(void);
- 
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/bcm63xx/patches-5.4/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch b/target/linux/bcm63xx/patches-5.4/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch
deleted file mode 100644
index 886fb2d6f3..0000000000
--- a/target/linux/bcm63xx/patches-5.4/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch
+++ /dev/null
@@ -1,189 +0,0 @@
-From cc025e749a1fece61a6cc0d64bbe7b12472259cc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:31:12 +0200
-Subject: [PATCH 01/10] MIPS: BCM63XX: move fallback sprom support into its own
- unit
-
-In preparation for enhancing it, move it into its own file. Require a
-mac address to be passed as the argument to always "reserve" the mac
-regardless of the inclusion state of SSB.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |  2 +-
- arch/mips/bcm63xx/boards/board_common.c            | 53 ++--------------
- arch/mips/bcm63xx/sprom.c                          | 70 ++++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  6 ++
- 4 files changed, 83 insertions(+), 48 deletions(-)
- create mode 100644 arch/mips/bcm63xx/sprom.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,8 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
- 		   setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
- 		   dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--		   dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
-+		   dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
-+		   sprom.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -39,44 +39,6 @@
- static struct board_info board;
- 
- /*
-- * Register a sane SPROMv2 to make the on-board
-- * bcm4318 WLAN work
-- */
--#ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
--	.revision		= 0x02,
--	.board_rev		= 0x17,
--	.country_code		= 0x0,
--	.ant_available_bg	= 0x3,
--	.pa0b0			= 0x15ae,
--	.pa0b1			= 0xfa85,
--	.pa0b2			= 0xfe8d,
--	.pa1b0			= 0xffff,
--	.pa1b1			= 0xffff,
--	.pa1b2			= 0xffff,
--	.gpio0			= 0xff,
--	.gpio1			= 0xff,
--	.gpio2			= 0xff,
--	.gpio3			= 0xff,
--	.maxpwr_bg		= 0x004c,
--	.itssi_bg		= 0x00,
--	.boardflags_lo		= 0x2848,
--	.boardflags_hi		= 0x0000,
--};
--
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
--{
--	if (bus->bustype == SSB_BUSTYPE_PCI) {
--		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
--		return 0;
--	} else {
--		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
--		return -EINVAL;
--	}
--}
--#endif
--
--/*
-  * return board name for /proc/cpuinfo
-  */
- const char *board_get_name(void)
-@@ -179,6 +141,7 @@ static struct platform_device bcm63xx_gp
- int __init board_register_devices(void)
- {
- 	int usbh_ports = 0;
-+	u8 mac[ETH_ALEN];
- 
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
-@@ -220,15 +183,10 @@ int __init board_register_devices(void)
- 	/* Generate MAC address for WLAN and register our SPROM,
- 	 * do this after registering enet devices
- 	 */
--#ifdef CONFIG_SSB_PCIHOST
--	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
--		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--		if (ssb_arch_register_fallback_sprom(
--				&bcm63xx_get_fallback_sprom) < 0)
--			pr_err(PFX "failed to register fallback SPROM\n");
--	}
--#endif
-+
-+	if (board_get_mac_address(mac) ||
-+	    bcm63xx_register_fallback_sprom(mac))
-+		pr_err(PFX "failed to register fallback SPROM\n");
- 
- 	bcm63xx_spi_register();
- 
---- /dev/null
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -0,0 +1,70 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/ssb/ssb.h>
-+#include <bcm63xx_fallback_sprom.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX	"sprom: "
-+
-+/*
-+ * Register a sane SPROMv2 to make the on-board
-+ * bcm4318 WLAN work
-+ */
-+#ifdef CONFIG_SSB_PCIHOST
-+static struct ssb_sprom bcm63xx_sprom = {
-+	.revision		= 0x02,
-+	.board_rev		= 0x17,
-+	.country_code		= 0x0,
-+	.ant_available_bg	= 0x3,
-+	.pa0b0			= 0x15ae,
-+	.pa0b1			= 0xfa85,
-+	.pa0b2			= 0xfe8d,
-+	.pa1b0			= 0xffff,
-+	.pa1b1			= 0xffff,
-+	.pa1b2			= 0xffff,
-+	.gpio0			= 0xff,
-+	.gpio1			= 0xff,
-+	.gpio2			= 0xff,
-+	.gpio3			= 0xff,
-+	.maxpwr_bg		= 0x004c,
-+	.itssi_bg		= 0x00,
-+	.boardflags_lo		= 0x2848,
-+	.boardflags_hi		= 0x0000,
-+};
-+
-+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+{
-+	if (bus->bustype == SSB_BUSTYPE_PCI) {
-+		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+		return 0;
-+	} else {
-+		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+		return -EINVAL;
-+	}
-+}
-+#endif
-+
-+int __init bcm63xx_register_fallback_sprom(u8 *mac)
-+{
-+	int ret = 0;
-+
-+#ifdef CONFIG_SSB_PCIHOST
-+	memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
-+	memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
-+	memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
-+
-+	ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
-+#endif
-+	return ret;
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -0,0 +1,6 @@
-+#ifndef __BCM63XX_FALLBACK_SPROM
-+#define __BCM63XX_FALLBACK_SPROM
-+
-+int bcm63xx_register_fallback_sprom(u8 *mac);
-+
-+#endif
diff --git a/target/linux/bcm63xx/patches-5.4/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch b/target/linux/bcm63xx/patches-5.4/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch
deleted file mode 100644
index d0e37efd53..0000000000
--- a/target/linux/bcm63xx/patches-5.4/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 9912a8b3c240a9b0af01ff496b7e8ed9e4cc5b82 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:43:49 +0200
-Subject: [PATCH 02/10] MIPS: BCM63XX: use platform data for the sprom
-
-Similar to ethernet setup, use a platform data struct for passing
-the mac. This eliminates the requirement to allocate an array on
-stack for the mac passed.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_common.c                     | 6 ++----
- arch/mips/bcm63xx/sprom.c                                   | 8 ++++----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 8 +++++++-
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h         | 4 ++++
- 4 files changed, 17 insertions(+), 9 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -141,7 +141,6 @@ static struct platform_device bcm63xx_gp
- int __init board_register_devices(void)
- {
- 	int usbh_ports = 0;
--	u8 mac[ETH_ALEN];
- 
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
-@@ -184,8 +183,8 @@ int __init board_register_devices(void)
- 	 * do this after registering enet devices
- 	 */
- 
--	if (board_get_mac_address(mac) ||
--	    bcm63xx_register_fallback_sprom(mac))
-+	if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
-+	    bcm63xx_register_fallback_sprom(&board.fallback_sprom))
- 		pr_err(PFX "failed to register fallback SPROM\n");
- 
- 	bcm63xx_spi_register();
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -55,14 +55,14 @@ int bcm63xx_get_fallback_sprom(struct ss
- }
- #endif
- 
--int __init bcm63xx_register_fallback_sprom(u8 *mac)
-+int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
- {
- 	int ret = 0;
- 
- #ifdef CONFIG_SSB_PCIHOST
--	memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
--	memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
--	memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
-+	memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-+	memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
-+	memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
- 
- 	ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
- #endif
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -1,6 +1,12 @@
- #ifndef __BCM63XX_FALLBACK_SPROM
- #define __BCM63XX_FALLBACK_SPROM
- 
--int bcm63xx_register_fallback_sprom(u8 *mac);
-+#include <linux/if_ether.h>
-+
-+struct fallback_sprom_data {
-+	u8 mac_addr[ETH_ALEN];
-+};
-+
-+int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
- 
- #endif
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -7,6 +7,7 @@
- #include <linux/leds.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
-+#include <bcm63xx_fallback_sprom.h>
- 
- /*
-  * flash mapping
-@@ -50,6 +51,9 @@ struct board_info {
- 
- 	/* External PHY reset GPIO flags from gpio.h */
- 	unsigned long ephy_reset_gpio_flags;
-+
-+	/* fallback sprom config */
-+	struct fallback_sprom_data fallback_sprom;
- };
- 
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/bcm63xx/patches-5.4/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch b/target/linux/bcm63xx/patches-5.4/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch
deleted file mode 100644
index 170578f8bc..0000000000
--- a/target/linux/bcm63xx/patches-5.4/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From 83131acbfb59760a19f3711c09526e191c8aad54 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:52:56 +0200
-Subject: [PATCH 03/10] MIPS: BCM63XX: make fallback sprom optional
-
-Some devices do not provide enough mac addresses to populate wifi in
-addition to ethernet.
-
-Use having pci enabled as a rough heuristic which boards should have it
-enabled.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c           | 12 ++++++++++++
- arch/mips/bcm63xx/boards/board_common.c             |  5 +++--
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |  1 +
- 3 files changed, 16 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -70,6 +70,7 @@ static struct board_info __initdata boar
- 	.has_uart0			= 1,
- 	.has_pci			= 1,
- 	.has_usbd			= 0,
-+	.use_fallback_sprom		= 1,
- 
- 	.usbd = {
- 		.use_fullspeed		= 0,
-@@ -219,6 +220,7 @@ static struct board_info __initdata boar
- 	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -264,6 +266,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -316,6 +319,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -370,6 +374,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -420,6 +425,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -443,6 +449,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -460,6 +467,7 @@ static struct board_info __initdata boar
- 
- 	.has_uart0			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 	.has_ohci0			= 1,
- 
- 	.has_enet0			= 1,
-@@ -482,6 +490,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -508,6 +517,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -559,6 +569,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -630,6 +641,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -183,8 +183,9 @@ int __init board_register_devices(void)
- 	 * do this after registering enet devices
- 	 */
- 
--	if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
--	    bcm63xx_register_fallback_sprom(&board.fallback_sprom))
-+	if (board.use_fallback_sprom &&
-+	    (board_get_mac_address(board.fallback_sprom.mac_addr) ||
-+	     bcm63xx_register_fallback_sprom(&board.fallback_sprom)))
- 		pr_err(PFX "failed to register fallback SPROM\n");
- 
- 	bcm63xx_spi_register();
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -33,6 +33,7 @@ struct board_info {
- 	unsigned int	has_usbd:1;
- 	unsigned int	has_uart0:1;
- 	unsigned int	has_uart1:1;
-+	unsigned int	use_fallback_sprom:1;
- 
- 	/* ethernet config */
- 	struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/bcm63xx/patches-5.4/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch b/target/linux/bcm63xx/patches-5.4/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch
deleted file mode 100644
index 0c4a9be47d..0000000000
--- a/target/linux/bcm63xx/patches-5.4/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 1cece9f7aca1f0c193edce201f77a87008c5a405 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:58:38 +0200
-Subject: [PATCH 04/10] MIPS: BCM63XX: allow different types of sprom
-
-Different chips require different sprom contents, so prepare for
-supplying the appropriate sprom type.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                                   | 13 ++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h |  5 +++++
- 2 files changed, 17 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -22,7 +22,7 @@
-  * bcm4318 WLAN work
-  */
- #ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
-+static __initconst struct ssb_sprom bcm63xx_default_sprom = {
- 	.revision		= 0x02,
- 	.board_rev		= 0x17,
- 	.country_code		= 0x0,
-@@ -43,6 +43,8 @@ static struct ssb_sprom bcm63xx_sprom =
- 	.boardflags_hi		= 0x0000,
- };
- 
-+static struct ssb_sprom bcm63xx_sprom;
-+
- int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
- 	if (bus->bustype == SSB_BUSTYPE_PCI) {
-@@ -60,6 +62,15 @@ int __init bcm63xx_register_fallback_spr
- 	int ret = 0;
- 
- #ifdef CONFIG_SSB_PCIHOST
-+	switch (data->type) {
-+	case SPROM_DEFAULT:
-+		memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-+		       sizeof(bcm63xx_sprom));
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
- 	memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
- 	memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
- 	memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -3,8 +3,13 @@
- 
- #include <linux/if_ether.h>
- 
-+enum sprom_type {
-+	SPROM_DEFAULT, /* default fallback sprom */
-+};
-+
- struct fallback_sprom_data {
- 	u8 mac_addr[ETH_ALEN];
-+	enum sprom_type type;
- };
- 
- int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
diff --git a/target/linux/bcm63xx/patches-5.4/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch b/target/linux/bcm63xx/patches-5.4/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch
deleted file mode 100644
index 2063cda485..0000000000
--- a/target/linux/bcm63xx/patches-5.4/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch
+++ /dev/null
@@ -1,581 +0,0 @@
-From cedee63bc73f8b7d45b8c0cba1236986812c1f83 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 22:16:36 +0200
-Subject: [PATCH 05/10] MIPS: BCM63XX: add support for "raw" sproms
-
-Allow using raw sprom content as templates.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c | 482 ++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 482 insertions(+)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -55,13 +55,556 @@ int bcm63xx_get_fallback_sprom(struct ss
- 		return -EINVAL;
- 	}
- }
-+
-+/* FIXME: use lib_sprom after submission upstream */
-+
-+/* Get the word-offset for a SSB_SPROM_XXX define. */
-+#define SPOFF(offset)	((offset) / sizeof(u16))
-+/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
-+#define SPEX16(_outvar, _offset, _mask, _shift)	\
-+	out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
-+#define SPEX32(_outvar, _offset, _mask, _shift)	\
-+	out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
-+			   in[SPOFF(_offset)]) & (_mask)) >> (_shift))
-+#define SPEX(_outvar, _offset, _mask, _shift) \
-+	SPEX16(_outvar, _offset, _mask, _shift)
-+
-+#define SPEX_ARRAY8(_field, _offset, _mask, _shift)	\
-+	do {	\
-+		SPEX(_field[0], _offset +  0, _mask, _shift);	\
-+		SPEX(_field[1], _offset +  2, _mask, _shift);	\
-+		SPEX(_field[2], _offset +  4, _mask, _shift);	\
-+		SPEX(_field[3], _offset +  6, _mask, _shift);	\
-+		SPEX(_field[4], _offset +  8, _mask, _shift);	\
-+		SPEX(_field[5], _offset + 10, _mask, _shift);	\
-+		SPEX(_field[6], _offset + 12, _mask, _shift);	\
-+		SPEX(_field[7], _offset + 14, _mask, _shift);	\
-+	} while (0)
-+
-+
-+static s8 sprom_extract_antgain(u8 sprom_revision, const u16 *in, u16 offset,
-+				u16 mask, u16 shift)
-+{
-+	u16 v;
-+	u8 gain;
-+
-+	v = in[SPOFF(offset)];
-+	gain = (v & mask) >> shift;
-+	if (gain == 0xFF)
-+		gain = 2; /* If unset use 2dBm */
-+	if (sprom_revision == 1) {
-+		/* Convert to Q5.2 */
-+		gain <<= 2;
-+	} else {
-+		/* Q5.2 Fractional part is stored in 0xC0 */
-+		gain = ((gain & 0xC0) >> 6) | ((gain & 0x3F) << 2);
-+	}
-+
-+	return (s8)gain;
-+}
-+
-+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
-+{
-+	SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+	SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
-+	SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
-+	SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
-+	SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
-+	SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
-+	SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
-+	SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
-+	SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
-+	SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
-+	     SSB_SPROM2_MAXP_A_LO_SHIFT);
-+}
-+
-+static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
-+{
-+	u16 loc[3];
-+
-+	if (out->revision == 3)			/* rev 3 moved MAC */
-+		loc[0] = SSB_SPROM3_IL0MAC;
-+	else {
-+		loc[0] = SSB_SPROM1_IL0MAC;
-+		loc[1] = SSB_SPROM1_ET0MAC;
-+		loc[2] = SSB_SPROM1_ET1MAC;
-+	}
-+
-+	SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
-+	SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
-+	     SSB_SPROM1_ETHPHY_ET1A_SHIFT);
-+	SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
-+	SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
-+	SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
-+	SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
-+	if (out->revision == 1)
-+		SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
-+		     SSB_SPROM1_BINF_CCODE_SHIFT);
-+	SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
-+	     SSB_SPROM1_BINF_ANTA_SHIFT);
-+	SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
-+	     SSB_SPROM1_BINF_ANTBG_SHIFT);
-+	SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0);
-+	SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0);
-+	SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0);
-+	SPEX(pa1b0, SSB_SPROM1_PA1B0, 0xFFFF, 0);
-+	SPEX(pa1b1, SSB_SPROM1_PA1B1, 0xFFFF, 0);
-+	SPEX(pa1b2, SSB_SPROM1_PA1B2, 0xFFFF, 0);
-+	SPEX(gpio0, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P0, 0);
-+	SPEX(gpio1, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P1,
-+	     SSB_SPROM1_GPIOA_P1_SHIFT);
-+	SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0);
-+	SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3,
-+	     SSB_SPROM1_GPIOB_P3_SHIFT);
-+	SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A,
-+	     SSB_SPROM1_MAXPWR_A_SHIFT);
-+	SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0);
-+	SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A,
-+	     SSB_SPROM1_ITSSI_A_SHIFT);
-+	SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
-+	SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
-+
-+	SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
-+	SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
-+
-+	/* Extract the antenna gain values. */
-+	out->antenna_gain.a0 = sprom_extract_antgain(out->revision, in,
-+						     SSB_SPROM1_AGAIN,
-+						     SSB_SPROM1_AGAIN_BG,
-+						     SSB_SPROM1_AGAIN_BG_SHIFT);
-+	out->antenna_gain.a1 = sprom_extract_antgain(out->revision, in,
-+						     SSB_SPROM1_AGAIN,
-+						     SSB_SPROM1_AGAIN_A,
-+						     SSB_SPROM1_AGAIN_A_SHIFT);
-+	if (out->revision >= 2)
-+		sprom_extract_r23(out, in);
-+}
-+
-+/* Revs 4 5 and 8 have partially shared layout */
-+static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
-+{
-+	SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
-+	     SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
-+	SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
-+	     SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
-+	SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
-+	     SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
-+	SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
-+	     SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
-+
-+	SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
-+	     SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
-+	SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
-+	     SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
-+	SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
-+	     SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
-+	SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
-+	     SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
-+
-+	SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
-+	     SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
-+	SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
-+	     SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
-+	SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
-+	     SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
-+	SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
-+	     SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
-+
-+	SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
-+	     SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
-+	SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
-+	     SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
-+	SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
-+	     SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
-+	SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
-+	     SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
-+}
-+
-+static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
-+{
-+	static const u16 pwr_info_offset[] = {
-+		SSB_SPROM4_PWR_INFO_CORE0, SSB_SPROM4_PWR_INFO_CORE1,
-+		SSB_SPROM4_PWR_INFO_CORE2, SSB_SPROM4_PWR_INFO_CORE3
-+	};
-+	u16 il0mac_offset;
-+	int i;
-+
-+	BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
-+		     ARRAY_SIZE(out->core_pwr_info));
-+
-+	if (out->revision == 4)
-+		il0mac_offset = SSB_SPROM4_IL0MAC;
-+	else
-+		il0mac_offset = SSB_SPROM5_IL0MAC;
-+
-+	SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
-+	SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
-+	     SSB_SPROM4_ETHPHY_ET1A_SHIFT);
-+	SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
-+	SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
-+	if (out->revision == 4) {
-+		SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
-+		SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
-+		SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
-+		SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
-+		SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
-+		SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
-+	} else {
-+		SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8);
-+		SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0);
-+		SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
-+		SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
-+		SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
-+		SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
-+	}
-+	SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
-+	     SSB_SPROM4_ANTAVAIL_A_SHIFT);
-+	SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG,
-+	     SSB_SPROM4_ANTAVAIL_BG_SHIFT);
-+	SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0);
-+	SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG,
-+	     SSB_SPROM4_ITSSI_BG_SHIFT);
-+	SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0);
-+	SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A,
-+	     SSB_SPROM4_ITSSI_A_SHIFT);
-+	if (out->revision == 4) {
-+		SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0);
-+		SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1,
-+		     SSB_SPROM4_GPIOA_P1_SHIFT);
-+		SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0);
-+		SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3,
-+		     SSB_SPROM4_GPIOB_P3_SHIFT);
-+	} else {
-+		SPEX(gpio0, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P0, 0);
-+		SPEX(gpio1, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P1,
-+		     SSB_SPROM5_GPIOA_P1_SHIFT);
-+		SPEX(gpio2, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P2, 0);
-+		SPEX(gpio3, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P3,
-+		     SSB_SPROM5_GPIOB_P3_SHIFT);
-+	}
-+
-+	/* Extract the antenna gain values. */
-+	out->antenna_gain.a0 = sprom_extract_antgain(out->revision, in,
-+						     SSB_SPROM4_AGAIN01,
-+						     SSB_SPROM4_AGAIN0,
-+						     SSB_SPROM4_AGAIN0_SHIFT);
-+	out->antenna_gain.a1 = sprom_extract_antgain(out->revision, in,
-+						     SSB_SPROM4_AGAIN01,
-+						     SSB_SPROM4_AGAIN1,
-+						     SSB_SPROM4_AGAIN1_SHIFT);
-+	out->antenna_gain.a2 = sprom_extract_antgain(out->revision, in,
-+						     SSB_SPROM4_AGAIN23,
-+						     SSB_SPROM4_AGAIN2,
-+						     SSB_SPROM4_AGAIN2_SHIFT);
-+	out->antenna_gain.a3 = sprom_extract_antgain(out->revision, in,
-+						     SSB_SPROM4_AGAIN23,
-+						     SSB_SPROM4_AGAIN3,
-+						     SSB_SPROM4_AGAIN3_SHIFT);
-+
-+	/* Extract cores power info info */
-+	for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
-+		u16 o = pwr_info_offset[i];
-+
-+		SPEX(core_pwr_info[i].itssi_2g, o + SSB_SPROM4_2G_MAXP_ITSSI,
-+			SSB_SPROM4_2G_ITSSI, SSB_SPROM4_2G_ITSSI_SHIFT);
-+		SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SPROM4_2G_MAXP_ITSSI,
-+			SSB_SPROM4_2G_MAXP, 0);
-+
-+		SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SPROM4_2G_PA_0, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SPROM4_2G_PA_1, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SPROM4_2G_PA_2, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_2g[3], o + SSB_SPROM4_2G_PA_3, ~0, 0);
-+
-+		SPEX(core_pwr_info[i].itssi_5g, o + SSB_SPROM4_5G_MAXP_ITSSI,
-+			SSB_SPROM4_5G_ITSSI, SSB_SPROM4_5G_ITSSI_SHIFT);
-+		SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SPROM4_5G_MAXP_ITSSI,
-+			SSB_SPROM4_5G_MAXP, 0);
-+		SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM4_5GHL_MAXP,
-+			SSB_SPROM4_5GH_MAXP, 0);
-+		SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM4_5GHL_MAXP,
-+			SSB_SPROM4_5GL_MAXP, SSB_SPROM4_5GL_MAXP_SHIFT);
-+
-+		SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SPROM4_5GL_PA_0, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SPROM4_5GL_PA_1, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SPROM4_5GL_PA_2, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gl[3], o + SSB_SPROM4_5GL_PA_3, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SPROM4_5G_PA_0, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SPROM4_5G_PA_1, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SPROM4_5G_PA_2, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5g[3], o + SSB_SPROM4_5G_PA_3, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SPROM4_5GH_PA_0, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SPROM4_5GH_PA_1, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SPROM4_5GH_PA_2, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gh[3], o + SSB_SPROM4_5GH_PA_3, ~0, 0);
-+	}
-+
-+	sprom_extract_r458(out, in);
-+
-+	/* TODO - get remaining rev 4 stuff needed */
-+}
-+
-+static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
-+{
-+	int i;
-+	u16 o;
-+	static const u16 pwr_info_offset[] = {
-+		SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
-+		SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
-+	};
-+	BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
-+			ARRAY_SIZE(out->core_pwr_info));
-+
-+	SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
-+	SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
-+	SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
-+	SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
-+	SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
-+	SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
-+	SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
-+	SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
-+	SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
-+	     SSB_SPROM8_ANTAVAIL_A_SHIFT);
-+	SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
-+	     SSB_SPROM8_ANTAVAIL_BG_SHIFT);
-+	SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0);
-+	SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG,
-+	     SSB_SPROM8_ITSSI_BG_SHIFT);
-+	SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
-+	SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
-+	     SSB_SPROM8_ITSSI_A_SHIFT);
-+	SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
-+	SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
-+	     SSB_SPROM8_MAXP_AL_SHIFT);
-+	SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
-+	SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
-+	     SSB_SPROM8_GPIOA_P1_SHIFT);
-+	SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
-+	SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
-+	     SSB_SPROM8_GPIOB_P3_SHIFT);
-+	SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
-+	SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
-+	     SSB_SPROM8_TRI5G_SHIFT);
-+	SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
-+	SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
-+	     SSB_SPROM8_TRI5GH_SHIFT);
-+	SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
-+	SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
-+	     SSB_SPROM8_RXPO5G_SHIFT);
-+	SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
-+	SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
-+	     SSB_SPROM8_RSSISMC2G_SHIFT);
-+	SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
-+	     SSB_SPROM8_RSSISAV2G_SHIFT);
-+	SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
-+	     SSB_SPROM8_BXA2G_SHIFT);
-+	SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
-+	SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
-+	     SSB_SPROM8_RSSISMC5G_SHIFT);
-+	SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
-+	     SSB_SPROM8_RSSISAV5G_SHIFT);
-+	SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
-+	     SSB_SPROM8_BXA5G_SHIFT);
-+	SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
-+	SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
-+	SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
-+	SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
-+	SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
-+	SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
-+	SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
-+	SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
-+	SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
-+	SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
-+	SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
-+	SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
-+	SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
-+	SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
-+	SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
-+	SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
-+	SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
-+
-+	/* Extract the antenna gain values. */
-+	out->antenna_gain.a0 = sprom_extract_antgain(out->revision, in,
-+						     SSB_SPROM8_AGAIN01,
-+						     SSB_SPROM8_AGAIN0,
-+						     SSB_SPROM8_AGAIN0_SHIFT);
-+	out->antenna_gain.a1 = sprom_extract_antgain(out->revision, in,
-+						     SSB_SPROM8_AGAIN01,
-+						     SSB_SPROM8_AGAIN1,
-+						     SSB_SPROM8_AGAIN1_SHIFT);
-+	out->antenna_gain.a2 = sprom_extract_antgain(out->revision, in,
-+						     SSB_SPROM8_AGAIN23,
-+						     SSB_SPROM8_AGAIN2,
-+						     SSB_SPROM8_AGAIN2_SHIFT);
-+	out->antenna_gain.a3 = sprom_extract_antgain(out->revision, in,
-+						     SSB_SPROM8_AGAIN23,
-+						     SSB_SPROM8_AGAIN3,
-+						     SSB_SPROM8_AGAIN3_SHIFT);
-+
-+	/* Extract cores power info info */
-+	for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
-+		o = pwr_info_offset[i];
-+		SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
-+			SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
-+		SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
-+			SSB_SPROM8_2G_MAXP, 0);
-+
-+		SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
-+
-+		SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
-+			SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
-+		SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
-+			SSB_SPROM8_5G_MAXP, 0);
-+		SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
-+			SSB_SPROM8_5GH_MAXP, 0);
-+		SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
-+			SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
-+
-+		SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
-+	}
-+
-+	/* Extract FEM info */
-+	SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
-+		SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
-+	SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G,
-+		SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
-+	SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G,
-+		SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
-+	SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G,
-+		SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
-+	SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G,
-+		SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
-+
-+	SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G,
-+		SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
-+	SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G,
-+		SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
-+	SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G,
-+		SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
-+	SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G,
-+		SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
-+	SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
-+		SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
-+
-+	SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
-+	     SSB_SPROM8_LEDDC_ON_SHIFT);
-+	SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF,
-+	     SSB_SPROM8_LEDDC_OFF_SHIFT);
-+
-+	SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN,
-+	     SSB_SPROM8_TXRXC_TXCHAIN_SHIFT);
-+	SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN,
-+	     SSB_SPROM8_TXRXC_RXCHAIN_SHIFT);
-+	SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH,
-+	     SSB_SPROM8_TXRXC_SWITCH_SHIFT);
-+
-+	SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0);
-+
-+	SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0);
-+	SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0);
-+	SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0);
-+	SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0);
-+
-+	SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP,
-+	     SSB_SPROM8_RAWTS_RAWTEMP_SHIFT);
-+	SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER,
-+	     SSB_SPROM8_RAWTS_MEASPOWER_SHIFT);
-+	SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX,
-+	     SSB_SPROM8_OPT_CORRX_TEMP_SLOPE,
-+	     SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT);
-+	SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX,
-+	     SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT);
-+	SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX,
-+	     SSB_SPROM8_OPT_CORRX_TEMP_OPTION,
-+	     SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT);
-+	SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP,
-+	     SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR,
-+	     SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT);
-+	SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP,
-+	     SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP,
-+	     SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT);
-+	SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL,
-+	     SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT);
-+
-+	SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0);
-+	SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0);
-+	SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0);
-+	SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0);
-+
-+	SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH,
-+	     SSB_SPROM8_THERMAL_TRESH_SHIFT);
-+	SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET,
-+	     SSB_SPROM8_THERMAL_OFFSET_SHIFT);
-+	SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA,
-+	     SSB_SPROM8_TEMPDELTA_PHYCAL,
-+	     SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT);
-+	SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD,
-+	     SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT);
-+	SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA,
-+	     SSB_SPROM8_TEMPDELTA_HYSTERESIS,
-+	     SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
-+	sprom_extract_r458(out, in);
-+
-+	/* TODO - get remaining rev 8 stuff needed */
-+}
-+
-+static int sprom_extract(struct ssb_sprom *out, const u16 *in, u16 size)
-+{
-+	memset(out, 0, sizeof(*out));
-+
-+	out->revision = in[size - 1] & 0x00FF;
-+
-+	memset(out->et0mac, 0xFF, 6);		/* preset et0 and et1 mac */
-+	memset(out->et1mac, 0xFF, 6);
-+
-+	switch (out->revision) {
-+	case 1:
-+	case 2:
-+	case 3:
-+		sprom_extract_r123(out, in);
-+		break;
-+	case 4:
-+	case 5:
-+		sprom_extract_r45(out, in);
-+		break;
-+	case 8:
-+		sprom_extract_r8(out, in);
-+		break;
-+	default:
-+		pr_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
-+			out->revision);
-+		out->revision = 1;
-+		sprom_extract_r123(out, in);
-+	}
-+
-+	if (out->boardflags_lo == 0xFFFF)
-+		out->boardflags_lo = 0;  /* per specs */
-+	if (out->boardflags_hi == 0xFFFF)
-+		out->boardflags_hi = 0;  /* per specs */
-+
-+	return 0;
-+}
-+
-+static __initdata u16 template_sprom[220];
- #endif
- 
-+
- int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
- {
- 	int ret = 0;
- 
- #ifdef CONFIG_SSB_PCIHOST
-+	u16 size = 0;
-+
- 	switch (data->type) {
- 	case SPROM_DEFAULT:
- 		memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-@@ -71,6 +614,9 @@ int __init bcm63xx_register_fallback_spr
- 		return -EINVAL;
- 	}
- 
-+	if (size > 0)
-+		sprom_extract(&bcm63xx_sprom, template_sprom, size);
-+
- 	memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
- 	memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
- 	memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
diff --git a/target/linux/bcm63xx/patches-5.4/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch b/target/linux/bcm63xx/patches-5.4/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch
deleted file mode 100644
index 0017cc2f6a..0000000000
--- a/target/linux/bcm63xx/patches-5.4/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch
+++ /dev/null
@@ -1,181 +0,0 @@
-From 7be5bb46003295c9e04fd4e795593b2deaacd783 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 22:33:38 +0200
-Subject: [PATCH 06/10] MIPS: BCM63XX: add raw fallback sproms for most common
- ssb cards
-
-Add template sproms for BCM4306, BCM4318, BCM4321, BCM4322, and BCM43222.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                          | 136 +++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |   6 +
- 2 files changed, 142 insertions(+)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -43,6 +43,122 @@ static __initconst struct ssb_sprom bcm6
- 	.boardflags_hi		= 0x0000,
- };
- 
-+
-+static __initconst u16 bcm4306_sprom[] = {
-+	0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002,
-+	0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3034, 0x14d4,
-+	0xfa91, 0xfe60, 0xffff, 0xffff, 0x004c, 0xffff, 0xffff, 0xffff,
-+	0x003e, 0x0a49, 0xff02, 0x0000, 0xff10, 0xffff, 0xffff, 0x0002,
-+};
-+
-+static __initconst u16 bcm4318_sprom[] = {
-+	0x2001, 0x0000, 0x0449, 0x14e4, 0x4318, 0x8000, 0x0002, 0x0000,
-+	0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3046, 0x15a7,
-+	0xfab0, 0xfe97, 0xffff, 0xffff, 0x0048, 0xffff, 0xffff, 0xffff,
-+	0x003e, 0xea49, 0xff02, 0x0000, 0xff08, 0xffff, 0xffff, 0x0002,
-+};
-+
-+static __initconst u16 bcm4321_sprom[] = {
-+	0x3001, 0x0000, 0x046c, 0x14e4, 0x4328, 0x8000, 0x0002, 0x0000,
-+	0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x5372, 0x0032, 0x4a01, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
-+	0xffff, 0x2728, 0x5b5b, 0x222b, 0x5b5b, 0x1927, 0x5b5b, 0x1e36,
-+	0x5b5b, 0x303c, 0x3030, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x3e4c, 0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0x3e4c,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0x0008, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x0004,
-+};
-+
-+static __initconst u16 bcm4322_sprom[] = {
-+	0x3001, 0x0000, 0x04bc, 0x14e4, 0x432c, 0x8000, 0x0002, 0x0000,
-+	0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x5372, 0x1209, 0x0200, 0x0000, 0x0400, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
-+	0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0301,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x2048, 0xfe9a, 0x1571, 0xfabd, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x2048, 0xfeb9, 0x159f, 0xfadd, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x3333, 0x5555, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43222_sprom[] = {
-+	0x2001, 0x0000, 0x04d4, 0x14e4, 0x4351, 0x8000, 0x0002, 0x0000,
-+	0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x5372, 0x2305, 0x0200, 0x0000, 0x2400, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
-+	0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x204c, 0xfea6, 0x1717, 0xfa6d, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x204c, 0xfeb8, 0x167c, 0xfa9e, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x3333, 0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333,
-+	0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0004, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
- static struct ssb_sprom bcm63xx_sprom;
- 
- int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-@@ -606,6 +722,26 @@ int __init bcm63xx_register_fallback_spr
- 	u16 size = 0;
- 
- 	switch (data->type) {
-+	case SPROM_BCM4306:
-+		memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom));
-+		size = ARRAY_SIZE(bcm4306_sprom);
-+		break;
-+	case SPROM_BCM4318:
-+		memcpy(&template_sprom, &bcm4318_sprom, sizeof(bcm4318_sprom));
-+		size = ARRAY_SIZE(bcm4318_sprom);
-+		break;
-+	case SPROM_BCM4321:
-+		memcpy(&template_sprom, &bcm4321_sprom, sizeof(bcm4321_sprom));
-+		size = ARRAY_SIZE(bcm4321_sprom);
-+		break;
-+	case SPROM_BCM4322:
-+		memcpy(&template_sprom, &bcm4322_sprom, sizeof(bcm4322_sprom));
-+		size = ARRAY_SIZE(bcm4322_sprom);
-+		break;
-+	case SPROM_BCM43222:
-+		memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom));
-+		size = ARRAY_SIZE(bcm43222_sprom);
-+		break;
- 	case SPROM_DEFAULT:
- 		memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
- 		       sizeof(bcm63xx_sprom));
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -5,6 +5,12 @@
- 
- enum sprom_type {
- 	SPROM_DEFAULT, /* default fallback sprom */
-+	/* SSB based */
-+	SPROM_BCM4306,
-+	SPROM_BCM4318,
-+	SPROM_BCM4321,
-+	SPROM_BCM4322,
-+	SPROM_BCM43222,
- };
- 
- struct fallback_sprom_data {
diff --git a/target/linux/bcm63xx/patches-5.4/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch b/target/linux/bcm63xx/patches-5.4/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch
deleted file mode 100644
index eaabbeb432..0000000000
--- a/target/linux/bcm63xx/patches-5.4/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From 03feb9db77fba3eef3d83e17a87a56979659b248 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 22:48:26 +0200
-Subject: [PATCH 07/10] MIPS: BCM63XX: also register a fallback sprom for bcma
-
-Similar to SSB, register a fallback sprom handler for BCMA.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Kconfig |  1 +
- arch/mips/bcm63xx/sprom.c        | 40 +++++++++++++++++++++++++++++++++++-----
- 2 files changed, 36 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -5,6 +5,7 @@ menu "Board support"
- config BOARD_BCM963XX
- 	bool "Generic Broadcom 963xx boards"
- 	select SSB
-+	select BCMA
- 	default y
- 
- endmenu
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -12,6 +12,7 @@
- #include <linux/string.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
-+#include <linux/bcma/bcma.h>
- #include <bcm63xx_fallback_sprom.h>
- #include <board_bcm963xx.h>
- 
-@@ -21,7 +22,7 @@
-  * Register a sane SPROMv2 to make the on-board
-  * bcm4318 WLAN work
-  */
--#ifdef CONFIG_SSB_PCIHOST
-+#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI)
- static __initconst struct ssb_sprom bcm63xx_default_sprom = {
- 	.revision		= 0x02,
- 	.board_rev		= 0x17,
-@@ -43,7 +44,7 @@ static __initconst struct ssb_sprom bcm6
- 	.boardflags_hi		= 0x0000,
- };
- 
--
-+#if defined (CONFIG_SSB_PCIHOST)
- static __initconst u16 bcm4306_sprom[] = {
- 	0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002,
- 	0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-@@ -158,10 +159,12 @@ static __initconst u16 bcm43222_sprom[]
- 	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
- 	0xffff, 0xffff, 0xffff, 0x0008,
- };
-+#endif /* CONFIG_SSB_PCIHOST */
- 
- static struct ssb_sprom bcm63xx_sprom;
- 
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+#if defined(CONFIG_SSB_PCIHOST)
-+int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
- 	if (bus->bustype == SSB_BUSTYPE_PCI) {
- 		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-@@ -171,6 +174,20 @@ int bcm63xx_get_fallback_sprom(struct ss
- 		return -EINVAL;
- 	}
- }
-+#endif
-+
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out)
-+{
-+	if (bus->hosttype == BCMA_HOSTTYPE_PCI) {
-+		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+		return 0;
-+	} else {
-+		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+		return -EINVAL;
-+	}
-+}
-+#endif
- 
- /* FIXME: use lib_sprom after submission upstream */
- 
-@@ -718,10 +735,11 @@ int __init bcm63xx_register_fallback_spr
- {
- 	int ret = 0;
- 
--#ifdef CONFIG_SSB_PCIHOST
-+#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI)
- 	u16 size = 0;
- 
- 	switch (data->type) {
-+#if defined(CONFIG_SSB_PCIHOST)
- 	case SPROM_BCM4306:
- 		memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom));
- 		size = ARRAY_SIZE(bcm4306_sprom);
-@@ -742,6 +760,7 @@ int __init bcm63xx_register_fallback_spr
- 		memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom));
- 		size = ARRAY_SIZE(bcm43222_sprom);
- 		break;
-+#endif
- 	case SPROM_DEFAULT:
- 		memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
- 		       sizeof(bcm63xx_sprom));
-@@ -756,8 +775,19 @@ int __init bcm63xx_register_fallback_spr
- 	memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
- 	memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
- 	memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
-+#endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */
-+
-+#if defined(CONFIG_SSB_PCIHOST)
-+	ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_ssb_sprom);
-+	if (ret)
-+		return ret;
-+
-+#endif
- 
--	ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+	ret = bcma_arch_register_fallback_sprom(bcm63xx_get_fallback_bcma_sprom);
-+	if (ret)
-+		return ret;
- #endif
- 	return ret;
- }
diff --git a/target/linux/bcm63xx/patches-5.4/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch b/target/linux/bcm63xx/patches-5.4/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch
deleted file mode 100644
index d3c40fff43..0000000000
--- a/target/linux/bcm63xx/patches-5.4/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch
+++ /dev/null
@@ -1,303 +0,0 @@
-From 27bf70e3fe797691b17df07ecbfaf9f5a4419f49 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 30 Jul 2014 23:14:27 +0200
-Subject: [PATCH 08/10] MIPS: BCM63XX: add BCMA based sprom templates
-
-Add fallback sproms for BCM4313, BCM43131, BCM43217, BCM43225, BCM43227,
-BCM43228, and BCM4331.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                          | 256 +++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |   8 +
- 2 files changed, 264 insertions(+)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -161,6 +161,226 @@ static __initconst u16 bcm43222_sprom[]
- };
- #endif /* CONFIG_SSB_PCIHOST */
- 
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+static __initconst u16 bcm4313_sprom[] = {
-+	0x2801, 0x0000, 0x0510, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
-+	0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+	0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+	0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x4727, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x5372, 0x1215, 0x2a00, 0x0800, 0x0800, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
-+	0xffff, 0x0011, 0x007a, 0x0000, 0x0000, 0x0000, 0x0000, 0x0201,
-+	0x0000, 0x7800, 0x7c0a, 0x0398, 0x0008, 0x0000, 0x0000, 0x0000,
-+	0x0044, 0x1684, 0xfd0d, 0xff35, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0048, 0xfed2, 0x15d9, 0xfac6, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0008,
-+};
-+
-+static __initconst u16 bcm43131_sprom[] = {
-+	0x2801, 0x0000, 0x05f7, 0x14e4, 0x0070, 0xedbe, 0x1c00, 0x2bc4,
-+	0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+	0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+	0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x43aa, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x5372, 0x1280, 0x0200, 0x0000, 0x8800, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0002, 0x0202,
-+	0xffff, 0x0022, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
-+	0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
-+	0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43217_sprom[] = {
-+	0x2801, 0x0000, 0x05e9, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4,
-+	0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+	0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+	0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x43a9, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x5372, 0x1252, 0x0200, 0x0000, 0x9800, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
-+	0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
-+	0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
-+	0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x7a08,
-+};
-+
-+static __initconst u16 bcm43225_sprom[] = {
-+	0x2801, 0x0000, 0x04da, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
-+	0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+	0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+	0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0x1008, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x4357, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x5372, 0x1200, 0x0200, 0x0000, 0x1000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x88ff, 0xffff, 0xffff, 0x0303, 0x0202,
-+	0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
-+	0xffff, 0x7800, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x204e, 0xfead, 0x1611, 0xfa9a, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x204e, 0xfec1, 0x1674, 0xfab2, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x5555, 0x5555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555,
-+	0x7555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0002, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43227_sprom[] = {
-+	0x2801, 0x0000, 0x0543, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4,
-+	0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+	0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+	0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x4358, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x5372, 0x1402, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
-+	0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
-+	0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x204c, 0xff36, 0x16d2, 0xfaae, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x204c, 0xfeca, 0x159b, 0xfa80, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
-+	0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43228_sprom[] = {
-+	0x2801, 0x0000, 0x0011, 0x1028, 0x0070, 0xedbe, 0x0000, 0x2bc4,
-+	0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+	0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+	0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x4359, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x5372, 0x1203, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0303, 0x0202,
-+	0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0215,
-+	0x0215, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x204c, 0xff73, 0x1762, 0xfaa4, 0x3e34, 0x3434, 0xfea1, 0x154c,
-+	0xfad0, 0xfea1, 0x144c, 0xfafb, 0xfe7b, 0x13fe, 0xfafc, 0x0000,
-+	0x204c, 0xff41, 0x16a3, 0xfa8f, 0x3e34, 0x3434, 0xfe97, 0x1446,
-+	0xfb05, 0xfe97, 0x1346, 0xfb32, 0xfeb9, 0x1516, 0xfaee, 0x0000,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x8888, 0x8888, 0x8888,
-+	0x8888, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
-+	0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
-+	0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
-+	0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xf008,
-+};
-+
-+static __initconst u16 bcm4331_sprom[] = {
-+	0x2801, 0x0000, 0x0525, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
-+	0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+	0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+	0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0x1010, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x4331, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x5372, 0x1104, 0x0200, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0xffff, 0x88ff, 0xffff, 0x0707, 0x0202,
-+	0xff02, 0x0077, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
-+	0x0325, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x2048, 0xfe56, 0x16f2, 0xfa44, 0x3e3c, 0x3c3c, 0xfe77, 0x1657,
-+	0xfa75, 0xffff, 0xffff, 0xffff, 0xfe76, 0x15da, 0xfa85, 0x0000,
-+	0x2048, 0xfe5c, 0x16b5, 0xfa56, 0x3e3c, 0x3c3c, 0xfe7c, 0x169d,
-+	0xfa6b, 0xffff, 0xffff, 0xffff, 0xfe7a, 0x1597, 0xfa97, 0x0000,
-+	0x2048, 0xfe68, 0x1734, 0xfa46, 0x3e3c, 0x3c3c, 0xfe7f, 0x15e4,
-+	0xfa94, 0xffff, 0xffff, 0xffff, 0xfe7d, 0x1582, 0xfa9f, 0x0000,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x0009,
-+};
-+
-+#endif  /* CONFIG_BCMA_HOST_PCI */
-+
- static struct ssb_sprom bcm63xx_sprom;
- 
- #if defined(CONFIG_SSB_PCIHOST)
-@@ -761,6 +981,42 @@ int __init bcm63xx_register_fallback_spr
- 		size = ARRAY_SIZE(bcm43222_sprom);
- 		break;
- #endif
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+	case SPROM_BCM4313:
-+		memcpy(&template_sprom, &bcm4313_sprom,
-+                       sizeof(bcm4313_sprom));
-+		size = ARRAY_SIZE(bcm4313_sprom);
-+		break;
-+	case SPROM_BCM43131:
-+		memcpy(&template_sprom, &bcm43131_sprom,
-+		       sizeof(bcm43131_sprom));
-+		size = ARRAY_SIZE(bcm43131_sprom);
-+		break;
-+	case SPROM_BCM43217:
-+		memcpy(&template_sprom, &bcm43217_sprom,
-+		       sizeof(bcm43217_sprom));
-+		size = ARRAY_SIZE(bcm43217_sprom);
-+		break;
-+	case SPROM_BCM43225:
-+		memcpy(&template_sprom, &bcm43225_sprom,
-+		       sizeof(bcm43225_sprom));
-+		size = ARRAY_SIZE(bcm43225_sprom);
-+		break;
-+	case SPROM_BCM43227:
-+		memcpy(&template_sprom, &bcm43227_sprom,
-+		       sizeof(bcm43227_sprom));
-+		size = ARRAY_SIZE(bcm43227_sprom);
-+		break;
-+	case SPROM_BCM43228:
-+		memcpy(&template_sprom, &bcm43228_sprom,
-+		       sizeof(bcm43228_sprom));
-+		size = ARRAY_SIZE(bcm43228_sprom);
-+		break;
-+	case SPROM_BCM4331:
-+		memcpy(&template_sprom, &bcm4331_sprom, sizeof(&bcm4331_sprom));
-+		size = ARRAY_SIZE(bcm4331_sprom);
-+		break;
-+#endif
- 	case SPROM_DEFAULT:
- 		memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
- 		       sizeof(bcm63xx_sprom));
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -11,6 +11,14 @@ enum sprom_type {
- 	SPROM_BCM4321,
- 	SPROM_BCM4322,
- 	SPROM_BCM43222,
-+	/* BCMA based */
-+	SPROM_BCM4313,
-+	SPROM_BCM43131,
-+	SPROM_BCM43217,
-+	SPROM_BCM43225,
-+	SPROM_BCM43227,
-+	SPROM_BCM43228,
-+	SPROM_BCM4331,
- };
- 
- struct fallback_sprom_data {
diff --git a/target/linux/bcm63xx/patches-5.4/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch b/target/linux/bcm63xx/patches-5.4/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch
deleted file mode 100644
index ad5ccbab0c..0000000000
--- a/target/linux/bcm63xx/patches-5.4/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 8575548b08e33c9ff4fd540abec09dd177e33682 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 31 Jul 2014 19:12:33 +0200
-Subject: [PATCH 09/10] MIPS: BCM63XX: allow board files to provide sprom
- fixups
-
-Allow board_info files to supply fixups for the base sproms to adapt
-them to the actual used sprom contents in case they do not use the
-default ones.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                                  | 14 +++++++++++++-
- .../mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h |  8 ++++++++
- 2 files changed, 21 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -947,6 +947,14 @@ static int sprom_extract(struct ssb_spro
- 	return 0;
- }
- 
-+void sprom_apply_fixups(u16 *sprom, struct sprom_fixup *fixups, int n)
-+{
-+	unsigned int i;
-+
-+	for (i = 0; i < n; i++)
-+		sprom[fixups[i].offset] = fixups[i].value;
-+}
-+
- static __initdata u16 template_sprom[220];
- #endif
- 
-@@ -1025,8 +1033,12 @@ int __init bcm63xx_register_fallback_spr
- 		return -EINVAL;
- 	}
- 
--	if (size > 0)
-+	if (size > 0) {
-+		sprom_apply_fixups(template_sprom, data->board_fixups,
-+				   data->num_board_fixups);
-+
- 		sprom_extract(&bcm63xx_sprom, template_sprom, size);
-+	}
- 
- 	memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
- 	memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -21,9 +21,17 @@ enum sprom_type {
- 	SPROM_BCM4331,
- };
- 
-+struct sprom_fixup {
-+	u16 offset;
-+	u16 value;
-+};
-+
- struct fallback_sprom_data {
- 	u8 mac_addr[ETH_ALEN];
- 	enum sprom_type type;
-+
-+	struct sprom_fixup *board_fixups;
-+	unsigned int num_board_fixups;
- };
- 
- int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
diff --git a/target/linux/bcm63xx/patches-5.4/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch b/target/linux/bcm63xx/patches-5.4/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch
deleted file mode 100644
index 4b994a22c6..0000000000
--- a/target/linux/bcm63xx/patches-5.4/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From f393eaacf178e7e8a61eb11a96edd7dfb35cb49d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 31 Jul 2014 20:39:44 +0200
-Subject: [PATCH 10/10] MIPS: BCM63XX: allow setting a pci bus/device for
- fallback sprom
-
-Warn if the set pci bus/slot does not match the actual request.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                          | 31 ++++++++++++++++++----
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  3 +++
- 2 files changed, 29 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -381,13 +381,25 @@ static __initconst u16 bcm4331_sprom[] =
- 
- #endif  /* CONFIG_BCMA_HOST_PCI */
- 
--static struct ssb_sprom bcm63xx_sprom;
-+struct fallback_sprom_match {
-+	u8 pci_bus;
-+	u8 pci_dev;
-+	struct ssb_sprom sprom;
-+};
-+
-+static struct fallback_sprom_match fallback_sprom;
- 
- #if defined(CONFIG_SSB_PCIHOST)
- int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
- 	if (bus->bustype == SSB_BUSTYPE_PCI) {
--		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+		if (bus->host_pci->bus->number != fallback_sprom.pci_bus ||
-+		    PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev)
-+			pr_warn("ssb_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
-+				fallback_sprom.pci_bus, fallback_sprom.pci_dev,
-+				bus->host_pci->bus->number,
-+				PCI_SLOT(bus->host_pci->devfn));
-+		memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
- 		return 0;
- 	} else {
- 		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-@@ -400,7 +412,13 @@ int bcm63xx_get_fallback_ssb_sprom(struc
- int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out)
- {
- 	if (bus->hosttype == BCMA_HOSTTYPE_PCI) {
--		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+		if (bus->host_pci->bus->number != fallback_sprom.pci_bus ||
-+		    PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev)
-+			pr_warn("bcma_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
-+				fallback_sprom.pci_bus, fallback_sprom.pci_dev,
-+				bus->host_pci->bus->number,
-+				PCI_SLOT(bus->host_pci->devfn));
-+		memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
- 		return 0;
- 	} else {
- 		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-@@ -1026,8 +1044,8 @@ int __init bcm63xx_register_fallback_spr
- 		break;
- #endif
- 	case SPROM_DEFAULT:
--		memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
--		       sizeof(bcm63xx_sprom));
-+		memcpy(&fallback_sprom.sprom, &bcm63xx_default_sprom,
-+		       sizeof(bcm63xx_default_sprom));
- 		break;
- 	default:
- 		return -EINVAL;
-@@ -1037,12 +1055,15 @@ int __init bcm63xx_register_fallback_spr
- 		sprom_apply_fixups(template_sprom, data->board_fixups,
- 				   data->num_board_fixups);
- 
--		sprom_extract(&bcm63xx_sprom, template_sprom, size);
-+		sprom_extract(&fallback_sprom.sprom, template_sprom, size);
- 	}
- 
--	memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
--	memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
--	memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
-+	memcpy(fallback_sprom.sprom.il0mac, data->mac_addr, ETH_ALEN);
-+	memcpy(fallback_sprom.sprom.et0mac, data->mac_addr, ETH_ALEN);
-+	memcpy(fallback_sprom.sprom.et1mac, data->mac_addr, ETH_ALEN);
-+
-+	fallback_sprom.pci_bus = data->pci_bus;
-+	fallback_sprom.pci_dev = data->pci_dev;
- #endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */
- 
- #if defined(CONFIG_SSB_PCIHOST)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -30,6 +30,9 @@ struct fallback_sprom_data {
- 	u8 mac_addr[ETH_ALEN];
- 	enum sprom_type type;
- 
-+	u8 pci_bus;
-+	u8 pci_dev;
-+
- 	struct sprom_fixup *board_fixups;
- 	unsigned int num_board_fixups;
- };
diff --git a/target/linux/bcm63xx/patches-5.4/366-MIPS-BCM63XX-fallback-sprom-override-devid.patch b/target/linux/bcm63xx/patches-5.4/366-MIPS-BCM63XX-fallback-sprom-override-devid.patch
deleted file mode 100644
index 31641aeff2..0000000000
--- a/target/linux/bcm63xx/patches-5.4/366-MIPS-BCM63XX-fallback-sprom-override-devid.patch
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -384,6 +384,7 @@ static __initconst u16 bcm4331_sprom[] =
- struct fallback_sprom_match {
- 	u8 pci_bus;
- 	u8 pci_dev;
-+	int override_devid;
- 	struct ssb_sprom sprom;
- };
- 
-@@ -399,6 +400,8 @@ int bcm63xx_get_fallback_ssb_sprom(struc
- 				fallback_sprom.pci_bus, fallback_sprom.pci_dev,
- 				bus->host_pci->bus->number,
- 				PCI_SLOT(bus->host_pci->devfn));
-+		if (fallback_sprom.override_devid)
-+			bus->host_pci->device = fallback_sprom.sprom.dev_id;
- 		memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
- 		return 0;
- 	} else {
-@@ -418,6 +421,8 @@ int bcm63xx_get_fallback_bcma_sprom(stru
- 				fallback_sprom.pci_bus, fallback_sprom.pci_dev,
- 				bus->host_pci->bus->number,
- 				PCI_SLOT(bus->host_pci->devfn));
-+		if (fallback_sprom.override_devid)
-+			bus->host_pci->device = fallback_sprom.sprom.dev_id;
- 		memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
- 		return 0;
- 	} else {
-@@ -965,6 +970,37 @@ static int sprom_extract(struct ssb_spro
- 	return 0;
- }
- 
-+int sprom_override_devid(struct fallback_sprom_data *data,
-+			 struct ssb_sprom *out, const u16 *in)
-+{
-+	switch (data->type) {
-+#if defined(CONFIG_SSB_PCIHOST)
-+		case SPROM_BCM4306:
-+		case SPROM_BCM4318:
-+		case SPROM_BCM4321:
-+		case SPROM_BCM4322:
-+		case SPROM_BCM43222:
-+			SPEX(dev_id, SSB_SPROM1_PID, 0xFFFF, 0);
-+			return !!out->dev_id;
-+#endif /* CONFIG_SSB_PCIHOST */
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+		case SPROM_BCM4313:
-+		case SPROM_BCM43131:
-+		case SPROM_BCM43217:
-+		case SPROM_BCM43225:
-+		case SPROM_BCM43227:
-+		case SPROM_BCM43228:
-+		case SPROM_BCM4331:
-+			SPEX(dev_id, 0x0060, 0xFFFF, 0);
-+			return !!out->dev_id;
-+#endif /* CONFIG_BCMA_HOST_PCI */
-+		case SPROM_DEFAULT:
-+			return 0;
-+	}
-+
-+	return 0;
-+}
-+
- void sprom_apply_fixups(u16 *sprom, struct sprom_fixup *fixups, int n)
- {
- 	unsigned int i;
-@@ -1056,6 +1092,11 @@ int __init bcm63xx_register_fallback_spr
- 				   data->num_board_fixups);
- 
- 		sprom_extract(&fallback_sprom.sprom, template_sprom, size);
-+
-+		fallback_sprom.override_devid = 
-+			sprom_override_devid(data, &fallback_sprom.sprom, template_sprom);
-+	} else {
-+		fallback_sprom.override_devid = 0;
- 	}
- 
- 	memcpy(fallback_sprom.sprom.il0mac, data->mac_addr, ETH_ALEN);
diff --git a/target/linux/bcm63xx/patches-5.4/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch b/target/linux/bcm63xx/patches-5.4/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch
deleted file mode 100644
index fee5f769b1..0000000000
--- a/target/linux/bcm63xx/patches-5.4/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From 26546e5499d98616322fb3472b977e2e86603f3a Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 24 Jun 2014 10:57:51 +0200
-Subject: [PATCH 45/48] MIPS: BCM63XX: add support for loading DTB
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Kconfig        |    4 ++++
- arch/mips/bcm63xx/boards/board_common.c |   34 +++++++++++++++++++++++++++++++
- arch/mips/bcm63xx/prom.c                |    6 ++++++
- 3 files changed, 44 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -2,6 +2,10 @@
- menu "Board support"
- 	depends on BCM63XX
- 
-+config BOARD_BCM63XX_DT
-+	bool "Device Tree boards (experimential)"
-+	select USE_OF
-+
- config BOARD_BCM963XX
- 	bool "Generic Broadcom 963xx boards"
- 	select SSB
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -10,11 +10,14 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
-+#include <linux/of_fdt.h>
-+#include <linux/of_platform.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
- #include <asm/addrspace.h>
- #include <asm/bootinfo.h>
- #include <asm/fw/cfe/cfe_api.h>
-+#include <asm/prom.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_uart.h>
-@@ -125,8 +128,23 @@ void __init board_setup(void)
- 	/* make sure we're running on expected cpu */
- 	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
- 		panic("unexpected CPU for bcm963xx board");
-+
-+#if CONFIG_OF
-+	if (initial_boot_params)
-+		__dt_setup_arch(initial_boot_params);
-+#endif
- }
- 
-+#if CONFIG_OF
-+void __init device_tree_init(void)
-+{
-+	if (!initial_boot_params)
-+		return;
-+
-+	unflatten_and_copy_device_tree();
-+}
-+#endif
-+
- static struct gpio_led_platform_data bcm63xx_led_data;
- 
- static struct platform_device bcm63xx_gpio_leds = {
-@@ -135,6 +153,13 @@ static struct platform_device bcm63xx_gp
- 	.dev.platform_data	= &bcm63xx_led_data,
- };
- 
-+#if CONFIG_OF
-+static struct of_device_id of_ids[] = {
-+	{ /* filled at runtime */ },
-+	{ .compatible = "simple-bus" },
-+	{ },
-+};
-+#endif
- /*
-  * third stage init callback, register all board devices.
-  */
-@@ -142,6 +167,15 @@ int __init board_register_devices(void)
- {
- 	int usbh_ports = 0;
- 
-+#if CONFIG_OF
-+	if (of_have_populated_dt()) {
-+		snprintf(of_ids[0].compatible, sizeof(of_ids[0].compatible),
-+			 "brcm,bcm%x", bcm63xx_get_cpu_id());
-+
-+		of_platform_populate(NULL, of_ids, NULL, NULL);
-+	}
-+#endif
-+
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
- 
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -8,6 +8,7 @@
- 
- #include <linux/init.h>
- #include <linux/memblock.h>
-+#include <linux/of_fdt.h>
- #include <linux/smp.h>
- #include <asm/bootinfo.h>
- #include <asm/bmips.h>
-@@ -23,6 +24,11 @@ void __init prom_init(void)
- {
- 	u32 reg, mask;
- 
-+#if CONFIG_OF
-+	if (fw_passed_dtb)
-+		early_init_dt_verify((void *)fw_passed_dtb);
-+#endif
-+
- 	bcm63xx_cpu_init();
- 
- 	/* stop any running watchdog */
diff --git a/target/linux/bcm63xx/patches-5.4/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch b/target/linux/bcm63xx/patches-5.4/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch
deleted file mode 100644
index ba7346ce28..0000000000
--- a/target/linux/bcm63xx/patches-5.4/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 25bf2b5836c892f091651d8a3384c9c57ce1b400 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 26 Jun 2014 12:51:00 +0200
-Subject: [PATCH 46/48] MIPS: BCM63XX: add support for matching the board_info
- by dtb
-
-Allow using the passed dtb's compatible property to match board_info
-structs instead of nvram's boardname field, which is not unique anyway.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   15 +++++++++++++++
- arch/mips/bcm63xx/boards/board_common.c   |   18 ++++++++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |    3 +++
- 3 files changed, 36 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -692,6 +692,10 @@ static const struct board_info __initcon
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- };
- 
-+static struct of_device_id const bcm963xx_boards_dt[] = {
-+	{ },
-+};
-+
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
-@@ -703,6 +707,7 @@ void __init board_bcm963xx_init(void)
- 	char *board_name = NULL;
- 	u32 val;
- 	struct bcm_hcs *hcs;
-+	const struct of_device_id *board_match;
- 
- 	/* read base address of boot chip select (0)
- 	 * 6328/6362 do not have MPI but boot from a fixed address
-@@ -746,6 +751,16 @@ void __init board_bcm963xx_init(void)
- 	} else {
- 		board_name = bcm63xx_nvram_get_name();
- 	}
-+
-+	/* find board by compat */
-+	board_match = bcm63xx_match_board(bcm963xx_boards_dt);
-+	if (board_match) {
-+		board_early_setup(board_match->data,
-+				  bcm63xx_nvram_get_mac_address);
-+
-+		return;
-+	}
-+
- 	/* find board by name */
- 	for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
- 		if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -239,3 +239,21 @@ int __init board_register_devices(void)
- 
- 	return 0;
- }
-+
-+const struct of_device_id * __init bcm63xx_match_board(const struct of_device_id *m)
-+{
-+	const struct of_device_id *match;
-+	unsigned long dt_root;
-+
-+	if (!IS_ENABLED(CONFIG_OF) || !initial_boot_params)
-+		return NULL;
-+
-+	dt_root = of_get_flat_dt_root();
-+
-+	for (match = m; match->compatible[0]; match++) {
-+		if (of_flat_dt_is_compatible(dt_root, match->compatible))
-+			return match;
-+	}
-+
-+	return NULL;
-+}
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -1,11 +1,14 @@
- #ifndef __BOARD_COMMON_H
- #define __BOARD_COMMON_H
- 
-+#include <linux/of.h>
- #include <board_bcm963xx.h>
- 
- void board_early_setup(const struct board_info *board,
- 		       int (*get_mac_address)(u8 mac[ETH_ALEN]));
- 
-+const struct of_device_id *bcm63xx_match_board(const struct of_device_id *);
-+
- #if defined(CONFIG_BOARD_BCM963XX)
- void board_bcm963xx_init(void);
- #else
diff --git a/target/linux/bcm63xx/patches-5.4/371_add_of_node_available_by_alias.patch b/target/linux/bcm63xx/patches-5.4/371_add_of_node_available_by_alias.patch
deleted file mode 100644
index 026eff3135..0000000000
--- a/target/linux/bcm63xx/patches-5.4/371_add_of_node_available_by_alias.patch
+++ /dev/null
@@ -1,37 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -143,6 +143,18 @@ void __init device_tree_init(void)
- 
- 	unflatten_and_copy_device_tree();
- }
-+
-+int board_of_device_present(const char *alias)
-+{
-+	bool present;
-+	struct device_node *np;
-+
-+	np = of_find_node_by_path(alias);
-+	present = of_device_is_available(np);
-+	of_node_put(np);
-+
-+	return present;
-+}
- #endif
- 
- static struct gpio_led_platform_data bcm63xx_led_data;
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -15,4 +15,13 @@ void board_bcm963xx_init(void);
- static inline void board_bcm963xx_init(void) { }
- #endif
- 
-+#if defined(CONFIG_OF)
-+int board_of_device_present(const char *alias);
-+#else
-+static inline void board_of_device_present(const char *alias)
-+{
-+	return 0;
-+}
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-5.4/372_dont_register_pflash_when_available_in_dtb.patch b/target/linux/bcm63xx/patches-5.4/372_dont_register_pflash_when_available_in_dtb.patch
deleted file mode 100644
index af0800f5aa..0000000000
--- a/target/linux/bcm63xx/patches-5.4/372_dont_register_pflash_when_available_in_dtb.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -23,6 +23,8 @@
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
- 
-+#include "boards/board_common.h"
-+
- static int flash_type;
- 
- static struct mtd_partition mtd_partitions[] = {
-@@ -179,6 +181,9 @@ int __init bcm63xx_flash_register(void)
- 
- 	switch (flash_type) {
- 	case BCM63XX_FLASH_TYPE_PARALLEL:
-+		/* don't register when already registered through from dtb */
-+		if (board_of_device_present("pflash"))
-+			return 0;
- 
- 		if (!mtd_resources[0].start) {
- 			/* read base address of boot chip select (0) */
diff --git a/target/linux/bcm63xx/patches-5.4/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch b/target/linux/bcm63xx/patches-5.4/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch
deleted file mode 100644
index c5041a923e..0000000000
--- a/target/linux/bcm63xx/patches-5.4/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 8a0803979163c647736cb234ee1620c049c4915c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 1 Dec 2014 00:20:07 +0100
-Subject: [PATCH 5/5] MIPS: BCM63XX: register interrupt controllers through DT
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c |   12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -14,6 +14,8 @@
- #include <linux/irqchip.h>
- #include <linux/irqchip/irq-bcm6345-ext.h>
- #include <linux/irqchip/irq-bcm6345-periph.h>
-+#include <linux/of.h>
-+#include <linux/of_fdt.h>
- #include <asm/irq_cpu.h>
- #include <asm/mipsregs.h>
- #include <bcm63xx_cpu.h>
-@@ -21,6 +23,9 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
- 
-+IRQCHIP_DECLARE(mips_cpu_intc, "mti,cpu-interrupt-controller",
-+	     mips_cpu_irq_of_init);
-+
- void __init arch_init_irq(void)
- {
- 	void __iomem *periph_bases[2];
-@@ -29,6 +34,13 @@ void __init arch_init_irq(void)
- 	int periph_irqs[2] = { 2, 3 };
- 	int ext_irqs[6];
- 
-+#ifdef CONFIG_OF
-+	if (initial_boot_params) {
-+		irqchip_init();
-+		return;
-+	}
-+#endif
-+
- 	periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
- 	periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
- 	ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
diff --git a/target/linux/bcm63xx/patches-5.4/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch b/target/linux/bcm63xx/patches-5.4/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch
deleted file mode 100644
index 56317410c1..0000000000
--- a/target/linux/bcm63xx/patches-5.4/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch
+++ /dev/null
@@ -1,178 +0,0 @@
-From dbe94a8daaa63ef81b7414f2a17bca8e36dd6daa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 20 Feb 2015 19:55:32 +0100
-Subject: [PATCH 1/6] gpio: add a simple GPIO driver for bcm63xx
-
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/gpio/Kconfig        |    8 +++
- drivers/gpio/Makefile       |    1 +
- drivers/gpio/gpio-bcm63xx.c |  135 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 131 insertions(+)
- create mode 100644 drivers/gpio/gpio-bcm63xx.c
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -147,6 +147,13 @@ config GPIO_BCM_KONA
- 	help
- 	  Turn on GPIO support for Broadcom "Kona" chips.
- 
-+config GPIO_BCM63XX
-+	bool "Broadcom BCM63XX GPIO"
-+	depends on MIPS || COMPILE_TEST
-+	select GPIO_GENERIC
-+	help
-+	  Turn on GPIO support for Broadcom BCM63XX xDSL chips.
-+
- config GPIO_BRCMSTB
- 	tristate "BRCMSTB GPIO support"
- 	default y if (ARCH_BRCMSTB || BMIPS_GENERIC)
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_GPIO_ARIZONA)		+= gpio-ariz
- obj-$(CONFIG_GPIO_ASPEED)		+= gpio-aspeed.o
- obj-$(CONFIG_GPIO_ATH79)		+= gpio-ath79.o
- obj-$(CONFIG_GPIO_BCM_KONA)		+= gpio-bcm-kona.o
-+obj-$(CONFIG_GPIO_BCM63XX)		+= gpio-bcm63xx.o
- obj-$(CONFIG_GPIO_BD70528)		+= gpio-bd70528.o
- obj-$(CONFIG_GPIO_BD9571MWV)		+= gpio-bd9571mwv.o
- obj-$(CONFIG_GPIO_BRCMSTB)		+= gpio-brcmstb.o
---- /dev/null
-+++ b/drivers/gpio/gpio-bcm63xx.c
-@@ -0,0 +1,135 @@
-+/*
-+ * Driver for BCM63XX memory-mapped GPIO controllers, based on
-+ * Generic driver for memory-mapped GPIO controllers.
-+ *
-+ * Copyright 2008 MontaVista Software, Inc.
-+ * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
-+ * Copyright 2015 Jonas Gorski <jogo@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/err.h>
-+#include <linux/bug.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/spinlock.h>
-+#include <linux/compiler.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/log2.h>
-+#include <linux/ioport.h>
-+#include <linux/io.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_gpio.h>
-+
-+static int bcm63xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+	char irq_name[7]; /* "gpioXX" */
-+
-+	sprintf(irq_name, "gpio%d", gpio);
-+	return of_irq_get_byname(chip->of_node, irq_name);
-+}
-+
-+static int bcm63xx_gpio_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct resource *dat_r, *dirout_r;
-+	void __iomem *dat;
-+	void __iomem *dirout;
-+	unsigned long sz;
-+	int err;
-+	struct gpio_chip *gc;
-+	struct bgpio_pdata *pdata = dev_get_platdata(dev);
-+
-+	dirout_r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	dat_r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+	if (!dat_r || !dirout_r)
-+		return -EINVAL;
-+
-+	if (resource_size(dat_r) != resource_size(dirout_r))
-+		return -EINVAL;
-+
-+	sz = resource_size(dat_r);
-+
-+	dat = devm_ioremap_resource(dev, dat_r);
-+	if (IS_ERR(dat))
-+		return PTR_ERR(dat);
-+
-+	dirout = devm_ioremap_resource(dev, dirout_r);
-+	if (IS_ERR(dirout))
-+		return PTR_ERR(dirout);
-+
-+	gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
-+	if (!gc)
-+		return -ENOMEM;
-+
-+	err = bgpio_init(gc, dev, sz, dat, NULL, NULL, dirout, NULL,
-+			 BGPIOF_BIG_ENDIAN_BYTE_ORDER);
-+	if (err)
-+		return err;
-+
-+	platform_set_drvdata(pdev, gc);
-+
-+	if (dev->of_node) {
-+		int id = of_alias_get_id(dev->of_node, "gpio");
-+		u32 ngpios;
-+
-+		if (id >= 0)
-+			gc->label = devm_kasprintf(dev, GFP_KERNEL,
-+						   "bcm63xx-gpio.%d", id);
-+
-+		if (!of_property_read_u32(dev->of_node, "ngpios", &ngpios))
-+			gc->ngpio = ngpios;
-+
-+		if (of_get_property(dev->of_node, "interrupt-names", NULL))
-+			gc->to_irq = bcm63xx_gpio_to_irq;
-+
-+	} else if (pdata) {
-+		gc->base = pdata->base;
-+		if (pdata->ngpio > 0)
-+			gc->ngpio = pdata->ngpio;
-+	}
-+
-+	return gpiochip_add(gc);
-+}
-+
-+static int bcm63xx_gpio_remove(struct platform_device *pdev)
-+{
-+	struct gpio_chip *gc = platform_get_drvdata(pdev);
-+
-+	gpiochip_remove(gc);
-+	return 0;
-+}
-+
-+#ifdef CONFIG_OF
-+static struct of_device_id bcm63xx_gpio_of_match[] = {
-+	{ .compatible = "brcm,bcm6345-gpio" },
-+	{ },
-+};
-+#endif
-+
-+static struct platform_driver bcm63xx_gpio_driver = {
-+	.probe = bcm63xx_gpio_probe,
-+	.remove = bcm63xx_gpio_remove,
-+	.driver = {
-+		.name = "bcm63xx-gpio",
-+		.of_match_table = of_match_ptr(bcm63xx_gpio_of_match),
-+	},
-+};
-+
-+module_platform_driver(bcm63xx_gpio_driver);
-+
-+MODULE_DESCRIPTION("Driver for BCM63XX memory-mapped GPIO controllers");
-+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/bcm63xx/patches-5.4/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch b/target/linux/bcm63xx/patches-5.4/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch
deleted file mode 100644
index fe56da083d..0000000000
--- a/target/linux/bcm63xx/patches-5.4/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch
+++ /dev/null
@@ -1,215 +0,0 @@
-From 302f69453721e5ee19f583339a3a646821d4a173 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 20 Feb 2015 23:58:54 +0100
-Subject: [PATCH 2/6] MIPS: BCM63XX: switch to new gpio driver
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_common.c |    2 +
- arch/mips/bcm63xx/gpio.c  | 145 ++++++++++------------------------------------
- arch/mips/bcm63xx/setup.c |   3 -
- 3 files changed, 32 insertions(+), 118 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -188,6 +188,8 @@ int __init board_register_devices(void)
- 	}
- #endif
- 
-+	bcm63xx_gpio_init();
-+
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
- 
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -5,147 +5,62 @@
-  *
-  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-  * Copyright (C) 2008-2011 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) Jonas Gorski <jogo@openwrt.org>
-  */
- 
- #include <linux/kernel.h>
- #include <linux/init.h>
--#include <linux/spinlock.h>
- #include <linux/platform_device.h>
- #include <linux/gpio/driver.h>
- 
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_gpio.h>
--#include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
- 
--static u32 gpio_out_low_reg;
--
--static void bcm63xx_gpio_out_low_reg_init(void)
-+static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
- {
--	switch (bcm63xx_get_cpu_id()) {
--	case BCM6345_CPU_ID:
--		gpio_out_low_reg = GPIO_DATA_LO_REG_6345;
--		break;
--	default:
--		gpio_out_low_reg = GPIO_DATA_LO_REG;
--		break;
--	}
--}
--
--static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
--static u32 gpio_out_low, gpio_out_high;
-+	struct resource res[2];
-+	struct bgpio_pdata pdata;
- 
--static void bcm63xx_gpio_set(struct gpio_chip *chip,
--			     unsigned gpio, int val)
--{
--	u32 reg;
--	u32 mask;
--	u32 *v;
--	unsigned long flags;
--
--	if (gpio >= chip->ngpio)
--		BUG();
--
--	if (gpio < 32) {
--		reg = gpio_out_low_reg;
--		mask = 1 << gpio;
--		v = &gpio_out_low;
--	} else {
--		reg = GPIO_DATA_HI_REG;
--		mask = 1 << (gpio - 32);
--		v = &gpio_out_high;
--	}
--
--	spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
--	if (val)
--		*v |= mask;
--	else
--		*v &= ~mask;
--	bcm_gpio_writel(*v, reg);
--	spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
--}
-+	memset(res, 0, sizeof(res));
-+	memset(&pdata, 0, sizeof(pdata));
- 
--static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio)
--{
--	u32 reg;
--	u32 mask;
-+	res[0].flags = IORESOURCE_MEM;
-+	res[0].start = bcm63xx_regset_address(RSET_GPIO);
-+	res[0].start += dir;
- 
--	if (gpio >= chip->ngpio)
--		BUG();
-+	res[0].end = res[0].start + 3;
- 
--	if (gpio < 32) {
--		reg = gpio_out_low_reg;
--		mask = 1 << gpio;
--	} else {
--		reg = GPIO_DATA_HI_REG;
--		mask = 1 << (gpio - 32);
--	}
-+	res[1].flags = IORESOURCE_MEM;
-+	res[1].start = bcm63xx_regset_address(RSET_GPIO);
-+	res[1].start += data;
- 
--	return !!(bcm_gpio_readl(reg) & mask);
--}
-+	res[1].end = res[1].start + 3;
- 
--static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
--				      unsigned gpio, int dir)
--{
--	u32 reg;
--	u32 mask;
--	u32 tmp;
--	unsigned long flags;
--
--	if (gpio >= chip->ngpio)
--		BUG();
--
--	if (gpio < 32) {
--		reg = GPIO_CTL_LO_REG;
--		mask = 1 << gpio;
--	} else {
--		reg = GPIO_CTL_HI_REG;
--		mask = 1 << (gpio - 32);
--	}
--
--	spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
--	tmp = bcm_gpio_readl(reg);
--	if (dir == BCM63XX_GPIO_DIR_IN)
--		tmp &= ~mask;
--	else
--		tmp |= mask;
--	bcm_gpio_writel(tmp, reg);
--	spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
-+	pdata.base = id * 32;
-+	pdata.ngpio = ngpio;
- 
--	return 0;
-+	platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
-+					  &pdata, sizeof(pdata));
- }
- 
--static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-+int __init bcm63xx_gpio_init(void)
- {
--	return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_IN);
--}
-+	int ngpio = bcm63xx_gpio_count();
-+	int data_low_reg;
- 
--static int bcm63xx_gpio_direction_output(struct gpio_chip *chip,
--					 unsigned gpio, int value)
--{
--	bcm63xx_gpio_set(chip, gpio, value);
--	return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_OUT);
--}
-+	if (BCMCPU_IS_6345())
-+		data_low_reg = GPIO_DATA_LO_REG_6345;
-+	else
-+		data_low_reg = GPIO_DATA_LO_REG;
- 
-+	bcm63xx_gpio_init_one(0, GPIO_CTL_LO_REG, data_low_reg, min(ngpio, 32));
- 
--static struct gpio_chip bcm63xx_gpio_chip = {
--	.label			= "bcm63xx-gpio",
--	.direction_input	= bcm63xx_gpio_direction_input,
--	.direction_output	= bcm63xx_gpio_direction_output,
--	.get			= bcm63xx_gpio_get,
--	.set			= bcm63xx_gpio_set,
--	.base			= 0,
--};
-+	if (ngpio <= 32)
-+		return 0;
- 
--int __init bcm63xx_gpio_init(void)
--{
--	bcm63xx_gpio_out_low_reg_init();
-+	bcm63xx_gpio_init_one(1, GPIO_CTL_HI_REG, GPIO_DATA_HI_REG, ngpio - 32);
- 
--	gpio_out_low = bcm_gpio_readl(gpio_out_low_reg);
--	if (!BCMCPU_IS_6345())
--		gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
--	bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
--	pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
-+	return 0;
- 
--	return gpiochip_add_data(&bcm63xx_gpio_chip, NULL);
- }
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -164,9 +164,6 @@ void __init plat_mem_setup(void)
- 
- int __init bcm63xx_register_devices(void)
- {
--	/* register gpiochip */
--	bcm63xx_gpio_init();
--
- 	return board_register_devices();
- }
- 
diff --git a/target/linux/bcm63xx/patches-5.4/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch b/target/linux/bcm63xx/patches-5.4/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
deleted file mode 100644
index 890f326bf4..0000000000
--- a/target/linux/bcm63xx/patches-5.4/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From d13bdf92ec885105cf107183f8464c40e5f3b93b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Feb 2015 17:21:59 +0100
-Subject: [PATCH 4/6] MIPS: BCM63XX: register lookup for ephy-reset gpio
-
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |    2 +-
- arch/mips/bcm63xx/boards/board_common.c            |    7 +++--
- arch/mips/bcm63xx/gpio.c                           |   32 ++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h  |    2 ++
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    5 +--
- 5 files changed, 42 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -55,7 +55,7 @@ static struct board_info __initdata boar
- 	},
- 
- 	.ephy_reset_gpio		= 36,
--	.ephy_reset_gpio_flags		= GPIOF_INIT_HIGH,
-+	.ephy_reset_gpio_flags		= GPIO_ACTIVE_LOW,
- };
- #endif /* CONFIG_BCM63XX_CPU_3368 */
- 
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -247,9 +247,10 @@ int __init board_register_devices(void)
- 
- 	platform_device_register(&bcm63xx_gpio_leds);
- 
--	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
--		gpio_request_one(board.ephy_reset_gpio,
--				board.ephy_reset_gpio_flags, "ephy-reset");
-+	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags) {
-+		bcm63xx_gpio_ephy_reset(board.ephy_reset_gpio,
-+					board.ephy_reset_gpio_flags);
-+	}
- 
- 	return 0;
- }
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -8,15 +8,23 @@
-  * Copyright (C) Jonas Gorski <jogo@openwrt.org>
-  */
- 
-+#include <asm/addrspace.h>
-+
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/gpio/driver.h>
-+#include <linux/gpio/machine.h>
- 
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_gpio.h>
- #include <bcm63xx_regs.h>
- 
-+static const char * const gpio_chip_labels[] = {
-+	"bcm63xx-gpio.0",
-+	"bcm63xx-gpio.1",
-+};
-+
- static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
- {
- 	struct resource res[2];
-@@ -64,3 +72,25 @@ int __init bcm63xx_gpio_init(void)
- 	return 0;
- 
- }
-+
-+static struct gpiod_lookup_table ephy_reset = {
-+	.dev_id = "bcm63xx_enet-0",
-+	.table = {
-+		{ /* filled at runtime */ },
-+		{ },
-+	},
-+};
-+
-+
-+void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags)
-+{
-+	if (ephy_reset.table[0].chip_label)
-+		return;
-+
-+	ephy_reset.table[0].chip_label = gpio_chip_labels[hw_gpio / 32];
-+	ephy_reset.table[0].chip_hwnum = hw_gpio % 32;
-+	ephy_reset.table[0].con_id = "reset";
-+	ephy_reset.table[0].flags = flags;
-+
-+	gpiod_add_lookup_table(&ephy_reset);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -3,9 +3,11 @@
- #define BCM63XX_GPIO_H
- 
- #include <linux/init.h>
-+#include <linux/gpio/machine.h>
- #include <bcm63xx_cpu.h>
- 
- int __init bcm63xx_gpio_init(void);
-+void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags);
- 
- static inline unsigned long bcm63xx_gpio_count(void)
- {
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -4,6 +4,7 @@
- 
- #include <linux/types.h>
- #include <linux/gpio.h>
-+#include <linux/gpio/machine.h>
- #include <linux/leds.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
-@@ -50,8 +51,8 @@ struct board_info {
- 	/* External PHY reset GPIO */
- 	unsigned int ephy_reset_gpio;
- 
--	/* External PHY reset GPIO flags from gpio.h */
--	unsigned long ephy_reset_gpio_flags;
-+	/* External PHY reset GPIO flags from gpio/machine.h */
-+	enum gpio_lookup_flags ephy_reset_gpio_flags;
- 
- 	/* fallback sprom config */
- 	struct fallback_sprom_data fallback_sprom;
diff --git a/target/linux/bcm63xx/patches-5.4/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch b/target/linux/bcm63xx/patches-5.4/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch
deleted file mode 100644
index 6eb1bd0284..0000000000
--- a/target/linux/bcm63xx/patches-5.4/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From e55892aac9d5508a000647ca66f0e678e02be3bb Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Feb 2015 17:26:50 +0100
-Subject: [PATCH 5/6] MIPS: BCM63XX: do not register gpio-controller if
-present in dtb
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/gpio.c |   7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -20,6 +20,8 @@
- #include <bcm63xx_gpio.h>
- #include <bcm63xx_regs.h>
- 
-+#include "boards/board_common.h"
-+
- static const char * const gpio_chip_labels[] = {
- 	"bcm63xx-gpio.0",
- 	"bcm63xx-gpio.1",
-@@ -48,8 +50,10 @@ static void __init bcm63xx_gpio_init_one
- 	pdata.base = id * 32;
- 	pdata.ngpio = ngpio;
- 
--	platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
--					  &pdata, sizeof(pdata));
-+	if (!board_of_device_present("gpio0") &&
-+	    !board_of_device_present("pinctrl"))
-+		platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res,
-+						  2, &pdata, sizeof(pdata));
- }
- 
- int __init bcm63xx_gpio_init(void)
diff --git a/target/linux/bcm63xx/patches-5.4/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch b/target/linux/bcm63xx/patches-5.4/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch
deleted file mode 100644
index b5719990bd..0000000000
--- a/target/linux/bcm63xx/patches-5.4/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 1647cccc871bf43876c3df9852869680880d054c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 25 Mar 2015 13:52:02 +0100
-Subject: [PATCH 1/2] MIPS: BCM63XX: provide a gpio lookup for the pcmcia
- ready gpio
-
-To prepare for a time when gpiobases don't need to be fixed anymore.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-pcmcia.c |   13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-pcmcia.c
-+++ b/arch/mips/bcm63xx/dev-pcmcia.c
-@@ -10,6 +10,7 @@
- #include <linux/kernel.h>
- #include <asm/bootinfo.h>
- #include <linux/platform_device.h>
-+#include <linux/gpio/machine.h>
- #include <bcm63xx_cs.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_pcmcia.h>
-@@ -101,6 +102,14 @@ static const struct {
- 	},
- };
- 
-+static struct gpiod_lookup_table pcmcia_gpios_table = {
-+	.dev_id = "bcm63xx_pcmcia.0",
-+	.table = {
-+		GPIO_LOOKUP("bcm63xx-gpio.0", 0, "ready", GPIO_ACTIVE_HIGH),
-+		{ },
-+	},
-+};
-+
- int __init bcm63xx_pcmcia_register(void)
- {
- 	int ret, i;
-@@ -112,16 +121,20 @@ int __init bcm63xx_pcmcia_register(void)
- 	switch (bcm63xx_get_cpu_id()) {
- 	case BCM6348_CPU_ID:
- 		pd.ready_gpio = 22;
-+		pcmcia_gpios_table.table[0].chip_hwnum = 22;
- 		break;
- 
- 	case BCM6358_CPU_ID:
- 		pd.ready_gpio = 18;
-+		pcmcia_gpios_table.table[0].chip_hwnum = 18;
- 		break;
- 
- 	default:
- 		return -ENODEV;
- 	}
- 
-+	gpiod_add_lookup_table(&pcmcia_gpios_table);
-+
- 	pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
- 	pcmcia_resources[0].end = pcmcia_resources[0].start +
- 		RSET_PCMCIA_SIZE - 1;
diff --git a/target/linux/bcm63xx/patches-5.4/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch b/target/linux/bcm63xx/patches-5.4/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch
deleted file mode 100644
index 253417153c..0000000000
--- a/target/linux/bcm63xx/patches-5.4/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From c4e04f1c54928a49b227a5420d38b18226838775 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 25 Mar 2015 13:54:56 +0100
-Subject: [PATCH 2/2] pcmcia: bcm63xx_pmcia: use the new named gpio
-
-Use the new named gpio instead of relying on the hardware gpio numbers
-matching the virtual gpio numbers.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/pcmcia/bcm63xx_pcmcia.c |    9 ++++++++-
- drivers/pcmcia/bcm63xx_pcmcia.h |    4 ++++
- 2 files changed, 12 insertions(+), 1 deletion(-)
-
---- a/drivers/pcmcia/bcm63xx_pcmcia.c
-+++ b/drivers/pcmcia/bcm63xx_pcmcia.c
-@@ -237,7 +237,7 @@ static unsigned int __get_socket_status(
- 		stat |= SS_XVCARD;
- 	stat |= SS_POWERON;
- 
--	if (gpio_get_value(skt->pd->ready_gpio))
-+	if (gpiod_get_value(skt->ready_gpio))
- 		stat |= SS_READY;
- 
- 	return stat;
-@@ -373,6 +373,13 @@ static int bcm63xx_drv_pcmcia_probe(stru
- 		goto err;
- 	}
- 
-+	/* get ready gpio */
-+	skt->ready_gpio = devm_gpiod_get(&pdev->dev, "ready", GPIOD_IN);
-+	if (IS_ERR(skt->ready_gpio)) {
-+		ret = PTR_ERR(skt->ready_gpio);
-+		goto err;
-+	}
-+
- 	/* resources are static */
- 	sock->resource_ops = &pccard_static_ops;
- 	sock->ops = &bcm63xx_pcmcia_operations;
---- a/drivers/pcmcia/bcm63xx_pcmcia.h
-+++ b/drivers/pcmcia/bcm63xx_pcmcia.h
-@@ -4,6 +4,7 @@
- 
- #include <linux/types.h>
- #include <linux/timer.h>
-+#include <linux/gpio/consumer.h>
- #include <pcmcia/ss.h>
- #include <bcm63xx_dev_pcmcia.h>
- 
-@@ -56,6 +57,9 @@ struct bcm63xx_pcmcia_socket {
- 
- 	/* base address of io memory */
- 	void __iomem *io_base;
-+
-+	/* ready gpio */
-+	struct gpio_desc *ready_gpio;
- };
- 
- #endif /* BCM63XX_PCMCIA_H_ */
diff --git a/target/linux/bcm63xx/patches-5.4/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-5.4/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch
deleted file mode 100644
index 5d4265f7fe..0000000000
--- a/target/linux/bcm63xx/patches-5.4/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 8439e5d2e69f54a532bb5f8ec001b4b5a3035574 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:38:05 +0200
-Subject: [PATCH 14/16] Documentation: add BCM6318 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6318 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6318-pinctrl.txt      | 79 ++++++++++++++++++++++
- 1 file changed, 79 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt
-@@ -0,0 +1,79 @@
-+* Broadcom BCM6318 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6318-pinctrl".
-+- regs: Register specifiers of dirout, dat, mode, mux, and pad registers.
-+- reg-names: Must be "dirout", "dat", "mode", "mux", "pad".
-+- gpio-controller: Identifies this node as a gpio controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+	compatible = "brcm,bcm6318-pinctrl";
-+	reg = <0x10000080 0x08>,
-+	      <0x10000088 0x08>,
-+	      <0x10000098 0x04>,
-+	      <0x1000009c 0x0c>,
-+	      <0x100000d4 0x18>;
-+	reg-names = "dirout", "dat", "mode", "mux", "pad";
-+
-+	gpio-controller;
-+	#gpio-cells = <2>;
-+};
-+
-+
-+Available pins/groups and functions:
-+
-+name		pins	functions
-+-----------------------------------------------------------
-+gpio0		0	led, ephy0_spd_led
-+gpio1		1	led, ephy1_spd_led
-+gpio2		2	led, ephy2_spd_led
-+gpio3		3	led, ephy3_spd_led
-+gpio4		4	led, ephy0_act_led
-+gpio5		5	led, ephy1_act_led
-+gpio6		6	led, ephy2_act_led, serial_led_data
-+gpio7		7	led, ephy3_act_led, serial_led_clk
-+gpio8		8	led, inet_act_led
-+gpio9		9	led, inet_fail_led
-+gpio10		10	led, dsl_led
-+gpio11		11	led, post_fail_led
-+gpio12		12	led, wlan_wps_led
-+gpio13		13	led, usb_pwron, usb_device_led
-+gpio14		14	led
-+gpio15		15	led
-+gpio16		16	led
-+gpio17		17	led
-+gpio18		18	led
-+gpio19		19	led
-+gpio20		20	led
-+gpio21		21	led
-+gpio22		22	led
-+gpio23		23	led
-+gpio24		24	-
-+gpio25		25	-
-+gpio26		26	-
-+gpio27		27	-
-+gpio28		28	-
-+gpio29		29	-
-+gpio30		30	-
-+gpio31		31	-
-+gpio32		32	-
-+gpio33		33	-
-+gpio34		34	-
-+gpio35		35	-
-+gpio36		36	-
-+gpio37		37	-
-+gpio38		38	-
-+gpio39		39	-
-+gpio40		40	usb_active
-+gpio41		41	-
-+gpio42		42	-
-+gpio43		43	-
-+gpio44		44	-
-+gpio45		45	-
-+gpio46		46	-
-+gpio47		47	-
-+gpio48		48	-
-+gpio49		49	-
diff --git a/target/linux/bcm63xx/patches-5.4/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch b/target/linux/bcm63xx/patches-5.4/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch
deleted file mode 100644
index 2a89dde3c3..0000000000
--- a/target/linux/bcm63xx/patches-5.4/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch
+++ /dev/null
@@ -1,609 +0,0 @@
-From bd9c250ef85e6f99aa5d59b21abb87d0a48f2f61 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:20:39 +0200
-Subject: [PATCH 15/16] pinctrl: add a pincontrol driver for BCM6318
-
-Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs
-to different functions. BCM6318 is similar to BCM6328 with the addition
-of a pad register, and the GPIO meaning of the mux register changes
-based on the GPIO number.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c | 564 ++++++++++++++++++++++++++++++
- 3 files changed, 572 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -2,6 +2,13 @@ config PINCTRL_BCM63XX
- 	bool
- 	select GPIO_GENERIC
- 
-+config PINCTRL_BCM6318
-+	bool "BCM6318 pincontrol driver" if COMPILE_TEST
-+	select PINMUX
-+	select PINCONF
-+	select PINCTRL_BCM63XX
-+	select GENERIC_PINCONF
-+
- config PINCTRL_BCM6328
- 	bool "BCM6328 pincontrol driver" if COMPILE_TEST
- 	select PINMUX
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1,4 +1,5 @@
- obj-$(CONFIG_PINCTRL_BCM63XX)	+= pinctrl-bcm63xx.o
-+obj-$(CONFIG_PINCTRL_BCM6318)	+= pinctrl-bcm6318.o
- obj-$(CONFIG_PINCTRL_BCM6328)	+= pinctrl-bcm6328.o
- obj-$(CONFIG_PINCTRL_BCM6348)	+= pinctrl-bcm6348.o
- obj-$(CONFIG_PINCTRL_BCM6358)	+= pinctrl-bcm6358.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c
-@@ -0,0 +1,564 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6318_NGPIO		50
-+
-+struct bcm6318_pingroup {
-+	const char *name;
-+	const unsigned * const pins;
-+	const unsigned num_pins;
-+};
-+
-+struct bcm6318_function {
-+	const char *name;
-+	const char * const *groups;
-+	const unsigned num_groups;
-+
-+	unsigned mode_val:1;
-+	unsigned mux_val:2;
-+};
-+
-+struct bcm6318_pinctrl {
-+	struct pinctrl_dev *pctldev;
-+	struct pinctrl_desc desc;
-+
-+	void __iomem *mode;
-+	void __iomem *mux[3];
-+	void __iomem *pad[6];
-+
-+	/* register access lock */
-+	spinlock_t lock;
-+
-+	struct gpio_chip gpio[2];
-+};
-+
-+static const struct pinctrl_pin_desc bcm6318_pins[] = {
-+	PINCTRL_PIN(0, "gpio0"),
-+	PINCTRL_PIN(1, "gpio1"),
-+	PINCTRL_PIN(2, "gpio2"),
-+	PINCTRL_PIN(3, "gpio3"),
-+	PINCTRL_PIN(4, "gpio4"),
-+	PINCTRL_PIN(5, "gpio5"),
-+	PINCTRL_PIN(6, "gpio6"),
-+	PINCTRL_PIN(7, "gpio7"),
-+	PINCTRL_PIN(8, "gpio8"),
-+	PINCTRL_PIN(9, "gpio9"),
-+	PINCTRL_PIN(10, "gpio10"),
-+	PINCTRL_PIN(11, "gpio11"),
-+	PINCTRL_PIN(12, "gpio12"),
-+	PINCTRL_PIN(13, "gpio13"),
-+	PINCTRL_PIN(14, "gpio14"),
-+	PINCTRL_PIN(15, "gpio15"),
-+	PINCTRL_PIN(16, "gpio16"),
-+	PINCTRL_PIN(17, "gpio17"),
-+	PINCTRL_PIN(18, "gpio18"),
-+	PINCTRL_PIN(19, "gpio19"),
-+	PINCTRL_PIN(20, "gpio20"),
-+	PINCTRL_PIN(21, "gpio21"),
-+	PINCTRL_PIN(22, "gpio22"),
-+	PINCTRL_PIN(23, "gpio23"),
-+	PINCTRL_PIN(24, "gpio24"),
-+	PINCTRL_PIN(25, "gpio25"),
-+	PINCTRL_PIN(26, "gpio26"),
-+	PINCTRL_PIN(27, "gpio27"),
-+	PINCTRL_PIN(28, "gpio28"),
-+	PINCTRL_PIN(29, "gpio29"),
-+	PINCTRL_PIN(30, "gpio30"),
-+	PINCTRL_PIN(31, "gpio31"),
-+	PINCTRL_PIN(32, "gpio32"),
-+	PINCTRL_PIN(33, "gpio33"),
-+	PINCTRL_PIN(34, "gpio34"),
-+	PINCTRL_PIN(35, "gpio35"),
-+	PINCTRL_PIN(36, "gpio36"),
-+	PINCTRL_PIN(37, "gpio37"),
-+	PINCTRL_PIN(38, "gpio38"),
-+	PINCTRL_PIN(39, "gpio39"),
-+	PINCTRL_PIN(40, "gpio40"),
-+	PINCTRL_PIN(41, "gpio41"),
-+	PINCTRL_PIN(42, "gpio42"),
-+	PINCTRL_PIN(43, "gpio43"),
-+	PINCTRL_PIN(44, "gpio44"),
-+	PINCTRL_PIN(45, "gpio45"),
-+	PINCTRL_PIN(46, "gpio46"),
-+	PINCTRL_PIN(47, "gpio47"),
-+	PINCTRL_PIN(48, "gpio48"),
-+	PINCTRL_PIN(49, "gpio49"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned gpio32_pins[] = { 32 };
-+static unsigned gpio33_pins[] = { 33 };
-+static unsigned gpio34_pins[] = { 34 };
-+static unsigned gpio35_pins[] = { 35 };
-+static unsigned gpio36_pins[] = { 36 };
-+static unsigned gpio37_pins[] = { 37 };
-+static unsigned gpio38_pins[] = { 38 };
-+static unsigned gpio39_pins[] = { 39 };
-+static unsigned gpio40_pins[] = { 40 };
-+static unsigned gpio41_pins[] = { 41 };
-+static unsigned gpio42_pins[] = { 42 };
-+static unsigned gpio43_pins[] = { 43 };
-+static unsigned gpio44_pins[] = { 44 };
-+static unsigned gpio45_pins[] = { 45 };
-+static unsigned gpio46_pins[] = { 46 };
-+static unsigned gpio47_pins[] = { 47 };
-+static unsigned gpio48_pins[] = { 48 };
-+static unsigned gpio49_pins[] = { 49 };
-+
-+#define BCM6318_GROUP(n)					\
-+	{							\
-+		.name = #n,					\
-+		.pins = n##_pins,				\
-+		.num_pins = ARRAY_SIZE(n##_pins),		\
-+	}
-+
-+static struct bcm6318_pingroup bcm6318_groups[] = {
-+	BCM6318_GROUP(gpio0),
-+	BCM6318_GROUP(gpio1),
-+	BCM6318_GROUP(gpio2),
-+	BCM6318_GROUP(gpio3),
-+	BCM6318_GROUP(gpio4),
-+	BCM6318_GROUP(gpio5),
-+	BCM6318_GROUP(gpio6),
-+	BCM6318_GROUP(gpio7),
-+	BCM6318_GROUP(gpio8),
-+	BCM6318_GROUP(gpio9),
-+	BCM6318_GROUP(gpio10),
-+	BCM6318_GROUP(gpio11),
-+	BCM6318_GROUP(gpio12),
-+	BCM6318_GROUP(gpio13),
-+	BCM6318_GROUP(gpio14),
-+	BCM6318_GROUP(gpio15),
-+	BCM6318_GROUP(gpio16),
-+	BCM6318_GROUP(gpio17),
-+	BCM6318_GROUP(gpio18),
-+	BCM6318_GROUP(gpio19),
-+	BCM6318_GROUP(gpio20),
-+	BCM6318_GROUP(gpio21),
-+	BCM6318_GROUP(gpio22),
-+	BCM6318_GROUP(gpio23),
-+	BCM6318_GROUP(gpio24),
-+	BCM6318_GROUP(gpio25),
-+	BCM6318_GROUP(gpio26),
-+	BCM6318_GROUP(gpio27),
-+	BCM6318_GROUP(gpio28),
-+	BCM6318_GROUP(gpio29),
-+	BCM6318_GROUP(gpio30),
-+	BCM6318_GROUP(gpio31),
-+	BCM6318_GROUP(gpio32),
-+	BCM6318_GROUP(gpio33),
-+	BCM6318_GROUP(gpio34),
-+	BCM6318_GROUP(gpio35),
-+	BCM6318_GROUP(gpio36),
-+	BCM6318_GROUP(gpio37),
-+	BCM6318_GROUP(gpio38),
-+	BCM6318_GROUP(gpio39),
-+	BCM6318_GROUP(gpio40),
-+	BCM6318_GROUP(gpio41),
-+	BCM6318_GROUP(gpio42),
-+	BCM6318_GROUP(gpio43),
-+	BCM6318_GROUP(gpio44),
-+	BCM6318_GROUP(gpio45),
-+	BCM6318_GROUP(gpio46),
-+	BCM6318_GROUP(gpio47),
-+	BCM6318_GROUP(gpio48),
-+	BCM6318_GROUP(gpio49),
-+};
-+
-+/* GPIO_MODE */
-+static const char * const led_groups[] = {
-+	"gpio0",
-+	"gpio1",
-+	"gpio2",
-+	"gpio3",
-+	"gpio4",
-+	"gpio5",
-+	"gpio6",
-+	"gpio7",
-+	"gpio8",
-+	"gpio9",
-+	"gpio10",
-+	"gpio11",
-+	"gpio12",
-+	"gpio13",
-+	"gpio14",
-+	"gpio15",
-+	"gpio16",
-+	"gpio17",
-+	"gpio18",
-+	"gpio19",
-+	"gpio20",
-+	"gpio21",
-+	"gpio22",
-+	"gpio23",
-+};
-+
-+/* PINMUX_SEL */
-+static const char * const ephy0_spd_led_groups[] = {
-+	"gpio0",
-+};
-+
-+static const char * const ephy1_spd_led_groups[] = {
-+	"gpio1",
-+};
-+
-+static const char * const ephy2_spd_led_groups[] = {
-+	"gpio2",
-+};
-+
-+static const char * const ephy3_spd_led_groups[] = {
-+	"gpio3",
-+};
-+
-+static const char * const ephy0_act_led_groups[] = {
-+	"gpio4",
-+};
-+
-+static const char * const ephy1_act_led_groups[] = {
-+	"gpio5",
-+};
-+
-+static const char * const ephy2_act_led_groups[] = {
-+	"gpio6",
-+};
-+
-+static const char * const ephy3_act_led_groups[] = {
-+	"gpio7",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+	"gpio6",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+	"gpio7",
-+};
-+
-+static const char * const inet_act_led_groups[] = {
-+	"gpio8",
-+};
-+
-+static const char * const inet_fail_led_groups[] = {
-+	"gpio9",
-+};
-+
-+static const char * const dsl_led_groups[] = {
-+	"gpio10",
-+};
-+
-+static const char * const post_fail_led_groups[] = {
-+	"gpio11",
-+};
-+
-+static const char * const wlan_wps_led_groups[] = {
-+	"gpio12",
-+};
-+
-+static const char * const usb_pwron_groups[] = {
-+	"gpio13",
-+};
-+
-+static const char * const usb_device_led_groups[] = {
-+	"gpio13",
-+};
-+
-+static const char * const usb_active_groups[] = {
-+	"gpio40",
-+};
-+
-+#define BCM6318_MODE_FUN(n)				\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+		.mode_val = 1,				\
-+	}
-+
-+#define BCM6318_MUX_FUN(n, mux)				\
-+	{						\
-+		.name = #n,				\
-+		.groups = n##_groups,			\
-+		.num_groups = ARRAY_SIZE(n##_groups),	\
-+		.mux_val = mux,				\
-+	}
-+
-+static const struct bcm6318_function bcm6318_funcs[] = {
-+	BCM6318_MODE_FUN(led),
-+	BCM6318_MUX_FUN(ephy0_spd_led, 1),
-+	BCM6318_MUX_FUN(ephy1_spd_led, 1),
-+	BCM6318_MUX_FUN(ephy2_spd_led, 1),
-+	BCM6318_MUX_FUN(ephy3_spd_led, 1),
-+	BCM6318_MUX_FUN(ephy0_act_led, 1),
-+	BCM6318_MUX_FUN(ephy1_act_led, 1),
-+	BCM6318_MUX_FUN(ephy2_act_led, 1),
-+	BCM6318_MUX_FUN(ephy3_act_led, 1),
-+	BCM6318_MUX_FUN(serial_led_data, 3),
-+	BCM6318_MUX_FUN(serial_led_clk, 3),
-+	BCM6318_MUX_FUN(inet_act_led, 1),
-+	BCM6318_MUX_FUN(inet_fail_led, 1),
-+	BCM6318_MUX_FUN(dsl_led, 1),
-+	BCM6318_MUX_FUN(post_fail_led, 1),
-+	BCM6318_MUX_FUN(wlan_wps_led, 1),
-+	BCM6318_MUX_FUN(usb_pwron, 1),
-+	BCM6318_MUX_FUN(usb_device_led, 2),
-+	BCM6318_MUX_FUN(usb_active, 2),
-+};
-+
-+static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+	return ARRAY_SIZE(bcm6318_groups);
-+}
-+
-+static const char *bcm6318_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+						  unsigned group)
-+{
-+	return bcm6318_groups[group].name;
-+}
-+
-+static int bcm6318_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+					  unsigned group, const unsigned **pins,
-+					  unsigned *num_pins)
-+{
-+	*pins = bcm6318_groups[group].pins;
-+	*num_pins = bcm6318_groups[group].num_pins;
-+
-+	return 0;
-+}
-+
-+static int bcm6318_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+	return ARRAY_SIZE(bcm6318_funcs);
-+}
-+
-+static const char *bcm6318_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+						 unsigned selector)
-+{
-+	return bcm6318_funcs[selector].name;
-+}
-+
-+static int bcm6318_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+				      unsigned selector,
-+				      const char * const **groups,
-+				      unsigned * const num_groups)
-+{
-+	*groups = bcm6318_funcs[selector].groups;
-+	*num_groups = bcm6318_funcs[selector].num_groups;
-+
-+	return 0;
-+}
-+
-+static void bcm6318_rmw_mux(struct bcm6318_pinctrl *pctl, unsigned pin,
-+			    u32 mode, u32 mux)
-+{
-+	unsigned long flags;
-+	u32 reg;
-+
-+	spin_lock_irqsave(&pctl->lock, flags);
-+	if (pin < 32) {
-+		reg = __raw_readl(pctl->mode);
-+		reg &= ~BIT(pin);
-+		if (mode)
-+			reg |= BIT(pin);
-+		__raw_writel(reg, pctl->mode);
-+	}
-+
-+	if (pin < 48) {
-+		reg = __raw_readl(pctl->mux[pin / 16]);
-+		reg &= ~(3UL << ((pin % 16) * 2));
-+		reg |= mux << ((pin % 16) * 2);
-+		__raw_writel(reg, pctl->mux[pin / 16]);
-+	}
-+	spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static void bcm6318_set_pad(struct bcm6318_pinctrl *pctl, unsigned pin, u8 val)
-+{
-+	unsigned long flags;
-+	u32 reg;
-+
-+	spin_lock_irqsave(&pctl->lock, flags);
-+	reg = __raw_readl(pctl->pad[pin / 8]);
-+	reg &= ~(0xfUL << ((pin % 8) * 4));
-+	reg |= val << ((pin % 8) * 4);
-+	__raw_writel(reg, pctl->pad[pin / 8]);
-+	spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+				   unsigned selector, unsigned group)
-+{
-+	struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+	const struct bcm6318_pingroup *grp = &bcm6318_groups[group];
-+	const struct bcm6318_function *f = &bcm6318_funcs[selector];
-+
-+	bcm6318_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val);
-+
-+	return 0;
-+}
-+
-+static int bcm6318_gpio_request_enable(struct pinctrl_dev *pctldev,
-+				       struct pinctrl_gpio_range *range,
-+				       unsigned offset)
-+{
-+	struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+	/* disable all functions using this pin */
-+	if (offset < 13) {
-+		/* GPIOs 0-12 use mux 0 as GPIO function */
-+		bcm6318_rmw_mux(pctl, offset, 0, 0);
-+	} else if (offset < 42) {
-+		/* GPIOs 13-41 use mux 3 as GPIO function */
-+		bcm6318_rmw_mux(pctl, offset, 0, 3);
-+
-+		/* FIXME: revert to old value for non gpio? */
-+		bcm6318_set_pad(pctl, offset, 0);
-+	} else {
-+		/* no idea, really */
-+	}
-+
-+	return 0;
-+}
-+
-+static struct pinctrl_ops bcm6318_pctl_ops = {
-+	.get_groups_count	= bcm6318_pinctrl_get_group_count,
-+	.get_group_name		= bcm6318_pinctrl_get_group_name,
-+	.get_group_pins		= bcm6318_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+	.dt_node_to_map		= pinconf_generic_dt_node_to_map_pin,
-+	.dt_free_map		= pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6318_pmx_ops = {
-+	.get_functions_count	= bcm6318_pinctrl_get_func_count,
-+	.get_function_name	= bcm6318_pinctrl_get_func_name,
-+	.get_function_groups	= bcm6318_pinctrl_get_groups,
-+	.set_mux		= bcm6318_pinctrl_set_mux,
-+	.gpio_request_enable	= bcm6318_gpio_request_enable,
-+	.strict 		= true,
-+};
-+
-+static int bcm6318_pinctrl_probe(struct platform_device *pdev)
-+{
-+	struct bcm6318_pinctrl *pctl;
-+	struct resource *res;
-+	void __iomem *mode, *mux, *pad;
-+	unsigned i;
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+	mode = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(mode))
-+		return PTR_ERR(mode);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux");
-+	mux = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(mux))
-+		return PTR_ERR(mux);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pad");
-+	pad = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(pad))
-+		return PTR_ERR(pad);
-+
-+	pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+	if (!pctl)
-+		return -ENOMEM;
-+
-+	spin_lock_init(&pctl->lock);
-+
-+	pctl->mode = mode;
-+
-+	for (i = 0; i < 3; i++)
-+		pctl->mux[i] = mux + (i * 4);
-+
-+	for (i = 0; i < 6; i++)
-+		pctl->pad[i] = pad + (i * 4);
-+
-+	pctl->desc.name = dev_name(&pdev->dev);
-+	pctl->desc.owner = THIS_MODULE;
-+	pctl->desc.pctlops = &bcm6318_pctl_ops;
-+	pctl->desc.pmxops = &bcm6318_pmx_ops;
-+
-+	pctl->desc.npins = ARRAY_SIZE(bcm6318_pins);
-+	pctl->desc.pins = bcm6318_pins;
-+
-+	platform_set_drvdata(pdev, pctl);
-+
-+	pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+						 pctl->gpio, BCM6318_NGPIO);
-+	if (IS_ERR(pctl->pctldev))
-+		return PTR_ERR(pctl->pctldev);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id bcm6318_pinctrl_match[] = {
-+	{ .compatible = "brcm,bcm6318-pinctrl", },
-+	{ },
-+};
-+
-+static struct platform_driver bcm6318_pinctrl_driver = {
-+	.probe = bcm6318_pinctrl_probe,
-+	.driver = {
-+		.name = "bcm6318-pinctrl",
-+		.of_match_table = bcm6318_pinctrl_match,
-+	},
-+};
-+
-+builtin_platform_driver(bcm6318_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-5.4/383-bcm63xx_select_pinctrl.patch b/target/linux/bcm63xx/patches-5.4/383-bcm63xx_select_pinctrl.patch
deleted file mode 100644
index cf655f55cc..0000000000
--- a/target/linux/bcm63xx/patches-5.4/383-bcm63xx_select_pinctrl.patch
+++ /dev/null
@@ -1,65 +0,0 @@
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -25,6 +25,8 @@ config BCM63XX_CPU_6318
- 	select HAVE_PCI
- 	select BCM63XX_OHCI
- 	select BCM63XX_EHCI
-+	select PINCTRL
-+	select PINCTRL_BCM6318
- 
- config BCM63XX_CPU_6328
- 	bool "support 6328 CPU"
-@@ -32,6 +34,8 @@ config BCM63XX_CPU_6328
- 	select HAVE_PCI
- 	select BCM63XX_OHCI
- 	select BCM63XX_EHCI
-+	select PINCTRL
-+	select PINCTRL_BCM6328
- 
- config BCM63XX_CPU_6338
- 	bool "support 6338 CPU"
-@@ -47,6 +51,8 @@ config BCM63XX_CPU_6348
- 	select SYS_HAS_CPU_BMIPS32_3300
- 	select HAVE_PCI
- 	select BCM63XX_OHCI
-+	select PINCTRL
-+	select PINCTRL_BCM6348
- 
- config BCM63XX_CPU_6358
- 	bool "support 6358 CPU"
-@@ -54,6 +60,8 @@ config BCM63XX_CPU_6358
- 	select HAVE_PCI
- 	select BCM63XX_OHCI
- 	select BCM63XX_EHCI
-+	select PINCTRL
-+	select PINCTRL_BCM6358
- 
- config BCM63XX_CPU_6362
- 	bool "support 6362 CPU"
-@@ -61,6 +69,8 @@ config BCM63XX_CPU_6362
- 	select HAVE_PCI
- 	select BCM63XX_OHCI
- 	select BCM63XX_EHCI
-+	select PINCTRL
-+	select PINCTRL_BCM6362
- 
- config BCM63XX_CPU_6368
- 	bool "support 6368 CPU"
-@@ -68,6 +78,8 @@ config BCM63XX_CPU_6368
- 	select HAVE_PCI
- 	select BCM63XX_OHCI
- 	select BCM63XX_EHCI
-+	select PINCTRL
-+	select PINCTRL_BCM6368
- 
- config BCM63XX_CPU_63268
- 	bool "support 63268 CPU"
-@@ -75,6 +87,8 @@ config BCM63XX_CPU_63268
- 	select HAVE_PCI
- 	select BCM63XX_OHCI
- 	select BCM63XX_EHCI
-+	select PINCTRL
-+	select PINCTRL_BCM63268
- endmenu
- 
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/bcm63xx/patches-5.4/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch b/target/linux/bcm63xx/patches-5.4/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch
deleted file mode 100644
index d6b1190b9d..0000000000
--- a/target/linux/bcm63xx/patches-5.4/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-From cad8f63047c0691e8185d3c9c6a2705b83310c9c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 31 Jul 2017 20:10:36 +0200
-Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
-
----
- arch/mips/bcm63xx/clk.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -501,6 +501,8 @@ static struct clk_lookup bcm3368_clks[]
- 	CLKDEV_INIT(NULL, "periph", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+	CLKDEV_INIT("fff8c100.serial", "refclk", &clk_periph),
-+	CLKDEV_INIT("fff8c120.serial", "refclk", &clk_periph),
- 	/* gated clocks */
- 	CLKDEV_INIT(NULL, "enet0", &clk_enet0),
- 	CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -517,7 +519,9 @@ static struct clk_lookup bcm6318_clks[]
- 	/* fixed rate clocks */
- 	CLKDEV_INIT(NULL, "periph", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+	CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
- 	CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+	CLKDEV_INIT("10003000.spi", "pll", &clk_hsspi_pll),
- 	/* gated clocks */
- 	CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
- 	CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -531,7 +535,10 @@ static struct clk_lookup bcm6328_clks[]
- 	CLKDEV_INIT(NULL, "periph", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+	CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
-+	CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
- 	CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+	CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
- 	/* gated clocks */
- 	CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
- 	CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -544,6 +551,7 @@ static struct clk_lookup bcm6338_clks[]
- 	/* fixed rate clocks */
- 	CLKDEV_INIT(NULL, "periph", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+	CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
- 	/* gated clocks */
- 	CLKDEV_INIT(NULL, "enet0", &clk_enet0),
- 	CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -558,6 +566,7 @@ static struct clk_lookup bcm6345_clks[]
- 	/* fixed rate clocks */
- 	CLKDEV_INIT(NULL, "periph", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+	CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
- 	/* gated clocks */
- 	CLKDEV_INIT(NULL, "enet0", &clk_enet0),
- 	CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -572,6 +581,7 @@ static struct clk_lookup bcm6348_clks[]
- 	/* fixed rate clocks */
- 	CLKDEV_INIT(NULL, "periph", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+	CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
- 	/* gated clocks */
- 	CLKDEV_INIT(NULL, "enet0", &clk_enet0),
- 	CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -588,6 +598,8 @@ static struct clk_lookup bcm6358_clks[]
- 	CLKDEV_INIT(NULL, "periph", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+	CLKDEV_INIT("fffe0100.serial", "refclk", &clk_periph),
-+	CLKDEV_INIT("fffe0120.serial", "refclk", &clk_periph),
- 	/* gated clocks */
- 	CLKDEV_INIT(NULL, "enet0", &clk_enet0),
- 	CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -607,7 +619,10 @@ static struct clk_lookup bcm6362_clks[]
- 	CLKDEV_INIT(NULL, "periph", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+	CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
-+	CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
- 	CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+	CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
- 	/* gated clocks */
- 	CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
- 	CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -623,6 +638,8 @@ static struct clk_lookup bcm6368_clks[]
- 	CLKDEV_INIT(NULL, "periph", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+	CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
-+	CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
- 	/* gated clocks */
- 	CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
- 	CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -637,7 +654,10 @@ static struct clk_lookup bcm63268_clks[]
- 	CLKDEV_INIT(NULL, "periph", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
- 	CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+	CLKDEV_INIT("10000180.serial", "refclk", &clk_periph),
-+	CLKDEV_INIT("100001a0.serial", "refclk", &clk_periph),
- 	CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+	CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
- 	/* gated clocks */
- 	CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
- 	CLKDEV_INIT(NULL, "usbh", &clk_usbh),
diff --git a/target/linux/bcm63xx/patches-5.4/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch b/target/linux/bcm63xx/patches-5.4/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch
deleted file mode 100644
index 03b8bfc7c6..0000000000
--- a/target/linux/bcm63xx/patches-5.4/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch
+++ /dev/null
@@ -1,172 +0,0 @@
-From 39d2882058345b5994680b8731848a0343878019 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 4 Feb 2017 12:58:50 +0100
-Subject: [PATCH 7/8] MIPS: BCM63XX: do not register SPI controllers
-
-We now register them through DT, so no need to keep them here.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -27,9 +27,7 @@
- #include <bcm63xx_dev_pci.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_flash.h>
--#include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
--#include <bcm63xx_dev_spi.h>
- #include <bcm63xx_dev_usb_ehci.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
-@@ -236,10 +234,6 @@ int __init board_register_devices(void)
- 	     bcm63xx_register_fallback_sprom(&board.fallback_sprom)))
- 		pr_err(PFX "failed to register fallback SPROM\n");
- 
--	bcm63xx_spi_register();
--
--	bcm63xx_hsspi_register();
--
- 	bcm63xx_flash_register();
- 
- 	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
- 		   setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
--		   dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
-+		   dev-rng.o dev-uart.o dev-wdt.o \
- 		   dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
- 		   sprom.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ /dev/null
-@@ -1,48 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License.  See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-- */
--
--#include <linux/init.h>
--#include <linux/kernel.h>
--#include <linux/platform_device.h>
--
--#include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_hsspi.h>
--#include <bcm63xx_regs.h>
--
--static struct resource spi_resources[] = {
--	{
--		.start		= -1, /* filled at runtime */
--		.end		= -1, /* filled at runtime */
--		.flags		= IORESOURCE_MEM,
--	},
--	{
--		.start		= -1, /* filled at runtime */
--		.flags		= IORESOURCE_IRQ,
--	},
--};
--
--static struct platform_device bcm63xx_hsspi_device = {
--	.name		= "bcm63xx-hsspi",
--	.id		= 0,
--	.num_resources	= ARRAY_SIZE(spi_resources),
--	.resource	= spi_resources,
--};
--
--int __init bcm63xx_hsspi_register(void)
--{
--	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
--		!BCMCPU_IS_63268())
--		return -ENODEV;
--
--	spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
--	spi_resources[0].end = spi_resources[0].start;
--	spi_resources[0].end += RSET_HSSPI_SIZE - 1;
--	spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
--
--	return platform_device_register(&bcm63xx_hsspi_device);
--}
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ /dev/null
-@@ -1,60 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License.  See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
-- * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
-- */
--
--#include <linux/init.h>
--#include <linux/kernel.h>
--#include <linux/export.h>
--#include <linux/platform_device.h>
--#include <linux/err.h>
--#include <linux/clk.h>
--
--#include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_spi.h>
--#include <bcm63xx_regs.h>
--
--static struct resource spi_resources[] = {
--	{
--		.start		= -1, /* filled at runtime */
--		.end		= -1, /* filled at runtime */
--		.flags		= IORESOURCE_MEM,
--	},
--	{
--		.start		= -1, /* filled at runtime */
--		.flags		= IORESOURCE_IRQ,
--	},
--};
--
--static struct platform_device bcm63xx_spi_device = {
--	.id		= -1,
--	.num_resources	= ARRAY_SIZE(spi_resources),
--	.resource	= spi_resources,
--};
--
--int __init bcm63xx_spi_register(void)
--{
--	if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
--		return -ENODEV;
--
--	spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
--	spi_resources[0].end = spi_resources[0].start;
--	spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
--
--	if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
--		bcm63xx_spi_device.name = "bcm6348-spi",
--		spi_resources[0].end += BCM_6348_RSET_SPI_SIZE - 1;
--	}
--
--	if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
--		BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
--		bcm63xx_spi_device.name = "bcm6358-spi",
--		spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
--	}
--
--	return platform_device_register(&bcm63xx_spi_device);
--}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-+++ /dev/null
-@@ -1,9 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0 */
--#ifndef BCM63XX_DEV_HSSPI_H
--#define BCM63XX_DEV_HSSPI_H
--
--#include <linux/types.h>
--
--int bcm63xx_hsspi_register(void);
--
--#endif /* BCM63XX_DEV_HSSPI_H */
diff --git a/target/linux/bcm63xx/patches-5.4/391-MIPS-BCM63XX-do-not-register-uart.patch b/target/linux/bcm63xx/patches-5.4/391-MIPS-BCM63XX-do-not-register-uart.patch
deleted file mode 100644
index bab5bbee6f..0000000000
--- a/target/linux/bcm63xx/patches-5.4/391-MIPS-BCM63XX-do-not-register-uart.patch
+++ /dev/null
@@ -1,259 +0,0 @@
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
- 		   setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
--		   dev-rng.o dev-uart.o dev-wdt.o \
-+		   dev-rng.o dev-wdt.o \
- 		   dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
- 		   sprom.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
---- a/arch/mips/bcm63xx/dev-uart.c
-+++ /dev/null
-@@ -1,76 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License.  See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-- */
--
--#include <linux/init.h>
--#include <linux/kernel.h>
--#include <linux/platform_device.h>
--#include <bcm63xx_cpu.h>
--
--static struct resource uart0_resources[] = {
--	{
--		/* start & end filled at runtime */
--		.flags		= IORESOURCE_MEM,
--	},
--	{
--		/* start filled at runtime */
--		.flags		= IORESOURCE_IRQ,
--	},
--};
--
--static struct resource uart1_resources[] = {
--	{
--		/* start & end filled at runtime */
--		.flags		= IORESOURCE_MEM,
--	},
--	{
--		/* start filled at runtime */
--		.flags		= IORESOURCE_IRQ,
--	},
--};
--
--static struct platform_device bcm63xx_uart_devices[] = {
--	{
--		.name		= "bcm63xx_uart",
--		.id		= 0,
--		.num_resources	= ARRAY_SIZE(uart0_resources),
--		.resource	= uart0_resources,
--	},
--
--	{
--		.name		= "bcm63xx_uart",
--		.id		= 1,
--		.num_resources	= ARRAY_SIZE(uart1_resources),
--		.resource	= uart1_resources,
--	}
--};
--
--int __init bcm63xx_uart_register(unsigned int id)
--{
--	if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
--		return -ENODEV;
--
--	if (id == 1 && (!BCMCPU_IS_3368() && !BCMCPU_IS_6358() &&
--		!BCMCPU_IS_6368()))
--		return -ENODEV;
--
--	if (id == 0) {
--		uart0_resources[0].start = bcm63xx_regset_address(RSET_UART0);
--		uart0_resources[0].end = uart0_resources[0].start +
--			RSET_UART_SIZE - 1;
--		uart0_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
--	}
--
--	if (id == 1) {
--		uart1_resources[0].start = bcm63xx_regset_address(RSET_UART1);
--		uart1_resources[0].end = uart1_resources[0].start +
--			RSET_UART_SIZE - 1;
--		uart1_resources[1].start = bcm63xx_get_irq_number(IRQ_UART1);
--	}
--
--	return platform_device_register(&bcm63xx_uart_devices[id]);
--}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
-+++ /dev/null
-@@ -1,7 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0 */
--#ifndef BCM63XX_DEV_UART_H_
--#define BCM63XX_DEV_UART_H_
--
--int bcm63xx_uart_register(unsigned int id);
--
--#endif /* BCM63XX_DEV_UART_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -32,8 +32,6 @@ struct board_info {
- 	unsigned int	has_ohci0:1;
- 	unsigned int	has_ehci0:1;
- 	unsigned int	has_usbd:1;
--	unsigned int	has_uart0:1;
--	unsigned int	has_uart1:1;
- 	unsigned int	use_fallback_sprom:1;
- 
- 	/* ethernet config */
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -20,7 +20,6 @@
- #include <asm/prom.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_gpio.h>
-@@ -188,12 +187,6 @@ int __init board_register_devices(void)
- 
- 	bcm63xx_gpio_init();
- 
--	if (board.has_uart0)
--		bcm63xx_uart_register(0);
--
--	if (board.has_uart1)
--		bcm63xx_uart_register(1);
--
- 	if (board.has_pccard)
- 		bcm63xx_pcmcia_register();
- 
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -35,9 +35,6 @@ static struct board_info __initdata boar
- 	.name				= "CVG834G_E15R3921",
- 	.expected_cpu_id		= 0x3368,
- 
--	.has_uart0			= 1,
--	.has_uart1			= 1,
--
- 	.has_enet0			= 1,
- 	.has_pci			= 1,
- 
-@@ -67,7 +64,6 @@ static struct board_info __initdata boar
- 	.name				= "96328avng",
- 	.expected_cpu_id		= 0x6328,
- 
--	.has_uart0			= 1,
- 	.has_pci			= 1,
- 	.has_usbd			= 0,
- 	.use_fallback_sprom		= 1,
-@@ -116,7 +112,6 @@ static struct board_info __initdata boar
- 	.name				= "96338GW",
- 	.expected_cpu_id		= 0x6338,
- 
--	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.enet0 = {
- 		.force_speed_100	= 1,
-@@ -159,7 +154,6 @@ static struct board_info __initdata boar
- 	.name				= "96338W",
- 	.expected_cpu_id		= 0x6338,
- 
--	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.enet0 = {
- 		.force_speed_100	= 1,
-@@ -204,8 +198,6 @@ static struct board_info __initdata boar
- static struct board_info __initdata board_96345gw2 = {
- 	.name				= "96345GW2",
- 	.expected_cpu_id		= 0x6345,
--
--	.has_uart0			= 1,
- };
- #endif /* CONFIG_BCM63XX_CPU_6345 */
- 
-@@ -217,7 +209,6 @@ static struct board_info __initdata boar
- 	.name				= "96348R",
- 	.expected_cpu_id		= 0x6348,
- 
--	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.has_pci			= 1,
- 	.use_fallback_sprom		= 1,
-@@ -262,7 +253,6 @@ static struct board_info __initdata boar
- 	.name				= "96348GW-10",
- 	.expected_cpu_id		= 0x6348,
- 
--	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-@@ -315,7 +305,6 @@ static struct board_info __initdata boar
- 	.name				= "96348GW-11",
- 	.expected_cpu_id		= 0x6348,
- 
--	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-@@ -370,7 +359,6 @@ static struct board_info __initdata boar
- 	.name				= "96348GW",
- 	.expected_cpu_id		= 0x6348,
- 
--	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-@@ -421,7 +409,6 @@ static struct board_info __initdata boar
- 	.name				= "F@ST2404",
- 	.expected_cpu_id		= 0x6348,
- 
--	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-@@ -465,7 +452,6 @@ static struct board_info __initdata boar
- 	.name				= "DV201AMR",
- 	.expected_cpu_id		= 0x6348,
- 
--	.has_uart0			= 1,
- 	.has_pci			= 1,
- 	.use_fallback_sprom		= 1,
- 	.has_ohci0			= 1,
-@@ -486,7 +472,6 @@ static struct board_info __initdata boar
- 	.name				= "96348GW-A",
- 	.expected_cpu_id		= 0x6348,
- 
--	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-@@ -513,7 +498,6 @@ static struct board_info __initdata boar
- 	.name				= "96358VW",
- 	.expected_cpu_id		= 0x6358,
- 
--	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-@@ -565,7 +549,6 @@ static struct board_info __initdata boar
- 	.name				= "96358VW2",
- 	.expected_cpu_id		= 0x6358,
- 
--	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-@@ -615,7 +598,6 @@ static struct board_info __initdata boar
- 	.name				= "AGPF-S0",
- 	.expected_cpu_id		= 0x6358,
- 
--	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
diff --git a/target/linux/bcm63xx/patches-5.4/392-MIPS-BCM63XX-remove-leds-and-buttons.patch b/target/linux/bcm63xx/patches-5.4/392-MIPS-BCM63XX-remove-leds-and-buttons.patch
deleted file mode 100644
index 8aaf093dff..0000000000
--- a/target/linux/bcm63xx/patches-5.4/392-MIPS-BCM63XX-remove-leds-and-buttons.patch
+++ /dev/null
@@ -1,343 +0,0 @@
-From 997f53b174c63153335508c22dc4493e8e5808d6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Feb 2015 17:52:32 +0100
-Subject: [PATCH] MIPS: BCM63XX: remove leds and buttons
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  262 -----------------------------
- 1 file changed, 262 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -43,14 +43,6 @@ static struct board_info __initdata boar
- 		.use_internal_phy	= 1,
- 	},
- 
--	.leds = {
--		{
--			.name		= "CVG834G:green:power",
--			.gpio		= 37,
--			.default_trigger= "default-on",
--		},
--	},
--
- 	.ephy_reset_gpio		= 36,
- 	.ephy_reset_gpio_flags		= GPIO_ACTIVE_LOW,
- };
-@@ -72,35 +64,6 @@ static struct board_info __initdata boar
- 		.use_fullspeed		= 0,
- 		.port_no		= 0,
- 	},
--
--	.leds = {
--		{
--			.name		= "96328avng::ppp-fail",
--			.gpio		= 2,
--			.active_low	= 1,
--		},
--		{
--			.name		= "96328avng::power",
--			.gpio		= 4,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "96328avng::power-fail",
--			.gpio		= 8,
--			.active_low	= 1,
--		},
--		{
--			.name		= "96328avng::wps",
--			.gpio		= 9,
--			.active_low	= 1,
--		},
--		{
--			.name		= "96328avng::ppp",
--			.gpio		= 11,
--			.active_low	= 1,
--		},
--	},
- };
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- 
-@@ -119,35 +82,6 @@ static struct board_info __initdata boar
- 	},
- 
- 	.has_ohci0			= 1,
--
--	.leds = {
--		{
--			.name		= "adsl",
--			.gpio		= 3,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ses",
--			.gpio		= 5,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 4,
--			.active_low	= 1,
--		},
--		{
--			.name		= "power",
--			.gpio		= 0,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "stop",
--			.gpio		= 1,
--			.active_low	= 1,
--		}
--	},
- };
- 
- static struct board_info __initdata board_96338w = {
-@@ -159,35 +93,6 @@ static struct board_info __initdata boar
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
--
--	.leds = {
--		{
--			.name		= "adsl",
--			.gpio		= 3,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ses",
--			.gpio		= 5,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 4,
--			.active_low	= 1,
--		},
--		{
--			.name		= "power",
--			.gpio		= 0,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "stop",
--			.gpio		= 1,
--			.active_low	= 1,
--		},
--	},
- };
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- 
-@@ -217,36 +122,6 @@ static struct board_info __initdata boar
- 		.has_phy		= 1,
- 		.use_internal_phy	= 1,
- 	},
--
--	.leds = {
--		{
--			.name		= "adsl-fail",
--			.gpio		= 2,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp",
--			.gpio		= 3,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 4,
--			.active_low	= 1,
--		},
--		{
--			.name		= "power",
--			.gpio		= 0,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--
--		},
--		{
--			.name		= "stop",
--			.gpio		= 1,
--			.active_low	= 1,
--		},
--	},
- };
- 
- static struct board_info __initdata board_96348gw_10 = {
-@@ -270,35 +145,6 @@ static struct board_info __initdata boar
- 	.has_ohci0			= 1,
- 	.has_pccard			= 1,
- 	.has_ehci0			= 1,
--
--	.leds = {
--		{
--			.name		= "adsl-fail",
--			.gpio		= 2,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp",
--			.gpio		= 3,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 4,
--			.active_low	= 1,
--		},
--		{
--			.name		= "power",
--			.gpio		= 0,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "stop",
--			.gpio		= 1,
--			.active_low	= 1,
--		},
--	},
- };
- 
- static struct board_info __initdata board_96348gw_11 = {
-@@ -324,35 +170,6 @@ static struct board_info __initdata boar
- 	.has_ohci0 = 1,
- 	.has_pccard = 1,
- 	.has_ehci0 = 1,
--
--	.leds = {
--		{
--			.name		= "adsl-fail",
--			.gpio		= 2,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp",
--			.gpio		= 3,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 4,
--			.active_low	= 1,
--		},
--		{
--			.name		= "power",
--			.gpio		= 0,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "stop",
--			.gpio		= 1,
--			.active_low	= 1,
--		},
--	},
- };
- 
- static struct board_info __initdata board_96348gw = {
-@@ -374,35 +191,6 @@ static struct board_info __initdata boar
- 	},
- 
- 	.has_ohci0 = 1,
--
--	.leds = {
--		{
--			.name		= "adsl-fail",
--			.gpio		= 2,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp",
--			.gpio		= 3,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 4,
--			.active_low	= 1,
--		},
--		{
--			.name		= "power",
--			.gpio		= 0,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "stop",
--			.gpio		= 1,
--			.active_low	= 1,
--		},
--	},
- };
- 
- static struct board_info __initdata board_FAST2404 = {
-@@ -516,33 +304,6 @@ static struct board_info __initdata boar
- 	.has_ohci0 = 1,
- 	.has_pccard = 1,
- 	.has_ehci0 = 1,
--
--	.leds = {
--		{
--			.name		= "adsl-fail",
--			.gpio		= 15,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp",
--			.gpio		= 22,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 23,
--			.active_low	= 1,
--		},
--		{
--			.name		= "power",
--			.gpio		= 4,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "stop",
--			.gpio		= 5,
--		},
--	},
- };
- 
- static struct board_info __initdata board_96358vw2 = {
-@@ -569,29 +330,6 @@ static struct board_info __initdata boar
- 	.has_pccard = 1,
- 	.has_ehci0 = 1,
- 	.num_usbh_ports			= 2,
--
--	.leds = {
--		{
--			.name		= "adsl",
--			.gpio		= 22,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 23,
--		},
--		{
--			.name		= "power",
--			.gpio		= 5,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "stop",
--			.gpio		= 4,
--			.active_low	= 1,
--		},
--	},
- };
- 
- static struct board_info __initdata board_AGPFS0 = {
diff --git a/target/linux/bcm63xx/patches-5.4/400-bcm963xx_flashmap.patch b/target/linux/bcm63xx/patches-5.4/400-bcm963xx_flashmap.patch
deleted file mode 100644
index 5a9532c321..0000000000
--- a/target/linux/bcm63xx/patches-5.4/400-bcm963xx_flashmap.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001
-From: Axel Gembe <ago@bastart.eu.org>
-Date: Mon, 12 May 2008 18:54:09 +0200
-Subject: [PATCH] bcm963xx: flashmap support
-
-Signed-off-by: Axel Gembe <ago@bastart.eu.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   19 +----------------
- drivers/mtd/maps/bcm963xx-flash.c         |   32 ++++++++++++++++++++++++----
- drivers/mtd/redboot.c                     |   13 +++++++++--
- 3 files changed, 38 insertions(+), 26 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -35,7 +35,7 @@ static struct mtd_partition mtd_partitio
- 	}
- };
- 
--static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
-+static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
- 
- static struct physmap_flash_data flash_data = {
- 	.width			= 2,
---- a/drivers/mtd/parsers/redboot.c
-+++ b/drivers/mtd/parsers/redboot.c
-@@ -84,6 +84,7 @@ static int parse_redboot_partitions(stru
- 	int nulllen = 0;
- 	int numslots;
- 	unsigned long offset;
-+	unsigned long fis_origin = 0;
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- 	static char nullstring[] = "unallocated";
- #endif
-@@ -190,6 +191,16 @@ static int parse_redboot_partitions(stru
- 		goto out;
- 	}
- 
-+	if (data && data->origin) {
-+		fis_origin = data->origin;
-+	} else {
-+		for (i = 0; i < numslots; i++) {
-+			if (!strncmp(buf[i].name, "RedBoot", 8)) {
-+				fis_origin = (buf[i].flash_base & ((master->size << 1) - 1));
-+			}
-+		}
-+	}
-+
- 	for (i = 0; i < numslots; i++) {
- 		struct fis_list *new_fl, **prev;
- 
-@@ -210,10 +221,10 @@ static int parse_redboot_partitions(stru
- 			goto out;
- 		}
- 		new_fl->img = &buf[i];
--		if (data && data->origin)
--			buf[i].flash_base -= data->origin;
--		else
--			buf[i].flash_base &= master->size-1;
-+		if (fis_origin)
-+			buf[i].flash_base -= fis_origin;
-+
-+		buf[i].flash_base &= (master->size << 1) - 1;
- 
- 		/* I'm sure the JFFS2 code has done me permanent damage.
- 		 * I now think the following is _normal_
diff --git a/target/linux/bcm63xx/patches-5.4/401-bcm963xx_real_rootfs_length.patch b/target/linux/bcm63xx/patches-5.4/401-bcm963xx_real_rootfs_length.patch
deleted file mode 100644
index eccdf0d7c5..0000000000
--- a/target/linux/bcm63xx/patches-5.4/401-bcm963xx_real_rootfs_length.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/include/linux/bcm963xx_tag.h
-+++ b/include/linux/bcm963xx_tag.h
-@@ -92,8 +92,10 @@ struct bcm_tag {
- 	__u32 rootfs_crc;
- 	/* 224-227: CRC32 of kernel partition */
- 	__u32 kernel_crc;
--	/* 228-235: Unused at present */
--	char reserved1[8];
-+	/* 228-231: Unused at present */
-+	char reserved1[4];
-+	/* 222-235: Openwrt: real rootfs length */
-+	__u32 real_rootfs_length;
- 	/* 236-239: CRC32 of header excluding last 20 bytes */
- 	__u32 header_crc;
- 	/* 240-255: Unused at present */
---- a/drivers/mtd/parsers/parser_imagetag.c
-+++ b/drivers/mtd/parsers/parser_imagetag.c
-@@ -136,7 +136,8 @@ static int bcm963xx_parse_imagetag_parti
- 		} else {
- 			/* OpenWrt layout */
- 			rootfsaddr = kerneladdr + kernellen;
--			rootfslen = spareaddr - rootfsaddr;
-+			rootfslen = buf->real_rootfs_length;
-+			spareaddr = rootfsaddr + rootfslen;
- 		}
- 	} else {
- 		goto out;
diff --git a/target/linux/bcm63xx/patches-5.4/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/bcm63xx/patches-5.4/402_bcm63xx_enet_vlan_incoming_fixed.patch
deleted file mode 100644
index 2425e221a2..0000000000
--- a/target/linux/bcm63xx/patches-5.4/402_bcm63xx_enet_vlan_incoming_fixed.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1631,7 +1631,7 @@ static int bcm_enet_change_mtu(struct ne
- 		return -EBUSY;
- 
- 	/* add ethernet header + vlan tag size */
--	actual_mtu += VLAN_ETH_HLEN;
-+	actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
- 
- 	/*
- 	 * setup maximum size before we get overflow mark in
diff --git a/target/linux/bcm63xx/patches-5.4/403-6358-enet1-external-mii-clk.patch b/target/linux/bcm63xx/patches-5.4/403-6358-enet1-external-mii-clk.patch
deleted file mode 100644
index efd9763a48..0000000000
--- a/target/linux/bcm63xx/patches-5.4/403-6358-enet1-external-mii-clk.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -97,6 +97,8 @@ void __init board_early_setup(const stru
- 		if (BCMCPU_IS_6348())
- 			val |= GPIO_MODE_6348_G3_EXT_MII |
- 				GPIO_MODE_6348_G0_EXT_MII;
-+		else if (BCMCPU_IS_6358())
-+			val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
- 	}
- 
- 	bcm_gpio_writel(val, GPIO_MODE_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -652,6 +652,8 @@
- #define GPIO_MODE_6358_EXTRA_SPI_SS	(1 << 7)
- #define GPIO_MODE_6358_SERIAL_LED	(1 << 10)
- #define GPIO_MODE_6358_UTOPIA		(1 << 12)
-+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 30)
-+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 31)
- 
- #define GPIO_MODE_6368_ANALOG_AFE_0	(1 << 0)
- #define GPIO_MODE_6368_ANALOG_AFE_1	(1 << 1)
diff --git a/target/linux/bcm63xx/patches-5.4/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/bcm63xx/patches-5.4/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
deleted file mode 100644
index c9392c216c..0000000000
--- a/target/linux/bcm63xx/patches-5.4/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
+++ /dev/null
@@ -1,247 +0,0 @@
-From 7fa63fdde703aaabaa7199ae879219737a98a3f3 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 6 Jan 2012 12:24:18 +0100
-Subject: [PATCH] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
-
-Only connect/disconnect the phy during probe and remove, not during any
-open/close. The phy seldom changes during the runtime, and disconnecting
-the phy during close will prevent it from keeping any configuration over
-a down/up cycle.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 158 +++++++++++++--------------
- 1 file changed, 78 insertions(+), 80 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -893,10 +893,8 @@ static int bcm_enet_open(struct net_devi
- 	struct bcm_enet_priv *priv;
- 	struct sockaddr addr;
- 	struct device *kdev;
--	struct phy_device *phydev;
- 	int i, ret;
- 	unsigned int size;
--	char phy_id[MII_BUS_ID_SIZE + 3];
- 	void *p;
- 	u32 val;
- 
-@@ -904,31 +902,10 @@ static int bcm_enet_open(struct net_devi
- 	kdev = &priv->pdev->dev;
- 
- 	if (priv->has_phy) {
--		/* connect to PHY */
--		snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
--			 priv->mii_bus->id, priv->phy_id);
--
--		phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
--				     PHY_INTERFACE_MODE_MII);
--
--		if (IS_ERR(phydev)) {
--			dev_err(kdev, "could not attach to PHY\n");
--			return PTR_ERR(phydev);
--		}
--
--		/* mask with MAC supported features */
--		phy_support_sym_pause(phydev);
--		phy_set_max_speed(phydev, SPEED_100);
--		phy_set_sym_pause(phydev, priv->pause_rx, priv->pause_rx,
--				  priv->pause_auto);
--
--		phy_attached_info(phydev);
--
-+		/* Reset state */
- 		priv->old_link = 0;
- 		priv->old_duplex = -1;
- 		priv->old_pause = -1;
--	} else {
--		phydev = NULL;
- 	}
- 
- 	/* mask all interrupts and request them */
-@@ -938,7 +915,7 @@ static int bcm_enet_open(struct net_devi
- 
- 	ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
- 	if (ret)
--		goto out_phy_disconnect;
-+		return ret;
- 
- 	ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
- 			  dev->name, dev);
-@@ -1100,8 +1077,8 @@ static int bcm_enet_open(struct net_devi
- 	enet_dmac_writel(priv, priv->dma_chan_int_mask,
- 			 ENETDMAC_IRMASK, priv->tx_chan);
- 
--	if (phydev)
--		phy_start(phydev);
-+	if (priv->has_phy)
-+		phy_start(dev->phydev);
- 	else
- 		bcm_enet_adjust_link(dev);
- 
-@@ -1131,10 +1108,6 @@ out_freeirq_rx:
- out_freeirq:
- 	free_irq(dev->irq, dev);
- 
--out_phy_disconnect:
--	if (phydev)
--		phy_disconnect(phydev);
--
- 	return ret;
- }
- 
-@@ -1227,10 +1200,6 @@ static int bcm_enet_stop(struct net_devi
- 	free_irq(priv->irq_rx, dev);
- 	free_irq(dev->irq, dev);
- 
--	/* release phy */
--	if (priv->has_phy)
--		phy_disconnect(dev->phydev);
--
- 	/* reset BQL after forced tx reclaim to not kernel panic */
- 	netdev_reset_queue(dev);
- 
-@@ -1802,14 +1771,47 @@ static int bcm_enet_probe(struct platfor
- 
- 	/* do minimal hardware init to be able to probe mii bus */
- 	bcm_enet_hw_preinit(priv);
-+	spin_lock_init(&priv->rx_lock);
-+
-+	/* init rx timeout (used for oom) */
-+	timer_setup(&priv->rx_timeout, bcm_enet_refill_rx_timer, 0);
-+
-+	/* init the mib update lock&work */
-+	mutex_init(&priv->mib_update_lock);
-+	INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
-+
-+	/* zero mib counters */
-+	for (i = 0; i < ENET_MIB_REG_COUNT; i++)
-+		enet_writel(priv, 0, ENET_MIB_REG(i));
-+
-+	/* register netdevice */
-+	dev->netdev_ops = &bcm_enet_ops;
-+	netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
-+
-+	dev->ethtool_ops = &bcm_enet_ethtool_ops;
-+	/* MTU range: 46 - 2028 */
-+	dev->min_mtu = ETH_ZLEN - ETH_HLEN;
-+	dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
-+	SET_NETDEV_DEV(dev, &pdev->dev);
-+
-+	ret = register_netdev(dev);
-+	if (ret)
-+		goto out_uninit_hw;
-+
-+	netif_carrier_off(dev);
-+	platform_set_drvdata(pdev, dev);
-+	priv->pdev = pdev;
-+	priv->net_dev = dev;
- 
- 	/* MII bus registration */
- 	if (priv->has_phy) {
-+		struct phy_device *phydev;
-+		char phy_id[MII_BUS_ID_SIZE + 3];
- 
- 		priv->mii_bus = mdiobus_alloc();
- 		if (!priv->mii_bus) {
- 			ret = -ENOMEM;
--			goto out_uninit_hw;
-+			goto out_unregister_netdev;
- 		}
- 
- 		bus = priv->mii_bus;
-@@ -1833,6 +1835,26 @@ static int bcm_enet_probe(struct platfor
- 			dev_err(&pdev->dev, "unable to register mdio bus\n");
- 			goto out_free_mdio;
- 		}
-+
-+		/* connect to PHY */
-+		snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
-+			 priv->mii_bus->id, priv->phy_id);
-+
-+		phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
-+				     PHY_INTERFACE_MODE_MII);
-+
-+		if (IS_ERR(phydev)) {
-+			dev_err(&pdev->dev, "could not attach to PHY\n");
-+			goto out_unregister_mdio;
-+		}
-+
-+		/* mask with MAC supported features */
-+		phy_support_sym_pause(phydev);
-+		phy_set_max_speed(phydev, SPEED_100);
-+		phy_set_sym_pause(phydev, priv->pause_rx, priv->pause_rx,
-+				  priv->pause_auto);
-+
-+		phy_attached_info(phydev);
- 	} else {
- 
- 		/* run platform code to initialize PHY device */
-@@ -1840,45 +1862,16 @@ static int bcm_enet_probe(struct platfor
- 		    pd->mii_config(dev, 1, bcm_enet_mdio_read_mii,
- 				   bcm_enet_mdio_write_mii)) {
- 			dev_err(&pdev->dev, "unable to configure mdio bus\n");
--			goto out_uninit_hw;
-+			goto out_unregister_netdev;
- 		}
- 	}
- 
--	spin_lock_init(&priv->rx_lock);
--
--	/* init rx timeout (used for oom) */
--	timer_setup(&priv->rx_timeout, bcm_enet_refill_rx_timer, 0);
--
--	/* init the mib update lock&work */
--	mutex_init(&priv->mib_update_lock);
--	INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
--
--	/* zero mib counters */
--	for (i = 0; i < ENET_MIB_REG_COUNT; i++)
--		enet_writel(priv, 0, ENET_MIB_REG(i));
--
--	/* register netdevice */
--	dev->netdev_ops = &bcm_enet_ops;
--	netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
--
--	dev->ethtool_ops = &bcm_enet_ethtool_ops;
--	/* MTU range: 46 - 2028 */
--	dev->min_mtu = ETH_ZLEN - ETH_HLEN;
--	dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
--	SET_NETDEV_DEV(dev, &pdev->dev);
--
--	ret = register_netdev(dev);
--	if (ret)
--		goto out_unregister_mdio;
--
--	netif_carrier_off(dev);
--	platform_set_drvdata(pdev, dev);
--	priv->pdev = pdev;
--	priv->net_dev = dev;
--
- 	return 0;
- 
- out_unregister_mdio:
-+	if (dev->phydev)
-+		phy_disconnect(dev->phydev);
-+
- 	if (priv->mii_bus)
- 		mdiobus_unregister(priv->mii_bus);
- 
-@@ -1886,6 +1879,9 @@ out_free_mdio:
- 	if (priv->mii_bus)
- 		mdiobus_free(priv->mii_bus);
- 
-+out_unregister_netdev:
-+	unregister_netdev(dev);
-+
- out_uninit_hw:
- 	/* turn off mdc clock */
- 	enet_writel(priv, 0, ENET_MIISC_REG);
-@@ -1916,6 +1912,7 @@ static int bcm_enet_remove(struct platfo
- 	enet_writel(priv, 0, ENET_MIISC_REG);
- 
- 	if (priv->has_phy) {
-+		phy_disconnect(dev->phydev);
- 		mdiobus_unregister(priv->mii_bus);
- 		mdiobus_free(priv->mii_bus);
- 	} else {
diff --git a/target/linux/bcm63xx/patches-5.4/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/bcm63xx/patches-5.4/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
deleted file mode 100644
index 86940ae14d..0000000000
--- a/target/linux/bcm63xx/patches-5.4/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From d8237d704fc25eb2fc25ef4403608b78c6a6d4be Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 15 Jul 2012 20:08:57 +0200
-Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   13 +++++++++++++
- drivers/net/ethernet/broadcom/bcm63xx_enet.c      |   12 ++++++++++++
- 2 files changed, 25 insertions(+), 0 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -968,6 +968,19 @@
- #define ENETSW_PORTOV_FDX_MASK		(1 << 1)
- #define ENETSW_PORTOV_LINKUP_MASK	(1 << 0)
- 
-+/* Port RGMII control register */
-+#define ENETSW_RGMII_CTRL_REG(x)	(0x60 + (x))
-+#define ENETSW_RGMII_CTRL_GMII_CLK_EN	(1 << 7)
-+#define ENETSW_RGMII_CTRL_MII_OVERRIDE_EN (1 << 6)
-+#define ENETSW_RGMII_CTRL_MII_MODE_MASK	(3 << 4)
-+#define ENETSW_RGMII_CTRL_RGMII_MODE	(0 << 4)
-+#define ENETSW_RGMII_CTRL_MII_MODE	(1 << 4)
-+#define ENETSW_RGMII_CTRL_RVMII_MODE	(2 << 4)
-+#define ENETSW_RGMII_CTRL_TIMING_SEL_EN	(1 << 0)
-+
-+/* Port RGMII timing register */
-+#define ENETSW_RGMII_TIMING_REG(x)	(0x68 + (x))
-+
- /* MDIO control register */
- #define ENETSW_MDIOC_REG		(0xb0)
- #define ENETSW_MDIOC_EXT_MASK		(1 << 16)
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2185,6 +2185,18 @@ static int bcm_enetsw_open(struct net_de
- 		priv->sw_port_link[i] = 0;
- 	}
- 
-+	/* enable external ports */
-+	for (i = ENETSW_RGMII_PORT0; i < priv->num_ports; i++) {
-+		u8 rgmii_ctrl;
-+
-+		if (!priv->used_ports[i].used)
-+			continue;
-+
-+		rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
-+		rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
-+		enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-+	}
-+
- 	/* reset mib */
- 	val = enetsw_readb(priv, ENETSW_GMCR_REG);
- 	val |= ENETSW_GMCR_RST_MIB_MASK;
diff --git a/target/linux/bcm63xx/patches-5.4/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch b/target/linux/bcm63xx/patches-5.4/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
deleted file mode 100644
index 0a3b34b743..0000000000
--- a/target/linux/bcm63xx/patches-5.4/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
+++ /dev/null
@@ -1,156 +0,0 @@
-From d135d94b3d1fe599d13e7198d5f502912d694c13 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 3 Jul 2011 15:00:38 +0200
-Subject: [PATCH 29/60] MIPS: BCM63XX: Register SPI flash if present
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/dev-flash.c                     |   35 +++++++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    2 +
- 2 files changed, 33 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -17,6 +17,9 @@
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
- #include <linux/mtd/spi-nor.h>
-+#include <linux/of.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
- 
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
-@@ -66,6 +69,41 @@ void __init bcm63xx_flash_force_phys_bas
- 	mtd_resources[0].end = end;
- }
- 
-+static struct spi_board_info bcm63xx_spi_flash_info[] = {
-+	{
-+		.bus_num	= 0,
-+		.chip_select	= 0,
-+		.mode		= 0,
-+		.max_speed_hz	= 781000,
-+		.modalias	= "m25p80",
-+	},
-+};
-+
-+static void bcm63xx_of_update_spi_flash_speed(struct device_node *np,
-+					       unsigned int new_hz)
-+{
-+	struct property *max_hz;
-+	__be32 *hz;
-+
-+	max_hz = kzalloc(sizeof(*max_hz) + sizeof(*hz), GFP_KERNEL);
-+	if (!max_hz)
-+		return;
-+
-+	max_hz->name = kstrdup("spi-max-frequency", GFP_KERNEL);
-+	if (!max_hz->name) {
-+		kfree(max_hz);
-+		return;
-+	}
-+
-+	max_hz->value = max_hz + 1;
-+	max_hz->length = sizeof(*hz);
-+
-+	hz = max_hz->value;
-+	*hz = cpu_to_be32(new_hz);
-+
-+	of_update_property(np, max_hz);
-+}
-+
- static int __init bcm63xx_detect_flash_type(void)
- {
- 	u32 val;
-@@ -73,9 +111,15 @@ static int __init bcm63xx_detect_flash_t
- 	switch (bcm63xx_get_cpu_id()) {
- 	case BCM6318_CPU_ID:
- 		/* only support serial flash */
-+		bcm63xx_spi_flash_info[0].max_speed_hz = 62500000;
- 		return BCM63XX_FLASH_TYPE_SERIAL;
- 	case BCM6328_CPU_ID:
- 		val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
-+		if (val & STRAPBUS_6328_HSSPI_CLK_FAST)
-+			bcm63xx_spi_flash_info[0].max_speed_hz = 33333334;
-+		else
-+			bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
-+
- 		if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
- 			return BCM63XX_FLASH_TYPE_SERIAL;
- 		else
-@@ -94,18 +138,31 @@ static int __init bcm63xx_detect_flash_t
- 			return BCM63XX_FLASH_TYPE_SERIAL;
- 	case BCM6362_CPU_ID:
- 		val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
-+		if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
-+			bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
-+		else
-+			bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
- 		if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
- 			return BCM63XX_FLASH_TYPE_SERIAL;
- 		else
- 			return BCM63XX_FLASH_TYPE_NAND;
- 	case BCM63268_CPU_ID:
- 		val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+		if (val & STRAPBUS_63268_HSSPI_CLK_FAST)
-+			bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
-+		else
-+			bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
- 		if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
- 			return BCM63XX_FLASH_TYPE_SERIAL;
- 		else
- 			return BCM63XX_FLASH_TYPE_NAND;
- 	case BCM6368_CPU_ID:
- 		val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
-+		if (val & STRAPBUS_6368_SPI_CLK_FAST)
-+			bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
- 		switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
- 		case STRAPBUS_6368_BOOT_SEL_NAND:
- 			return BCM63XX_FLASH_TYPE_NAND;
-@@ -177,6 +234,7 @@ void __init bcm63xx_flash_detect(void)
- 
- int __init bcm63xx_flash_register(void)
- {
-+	struct device_node *np;
- 	u32 val;
- 
- 	switch (flash_type) {
-@@ -196,8 +254,14 @@ int __init bcm63xx_flash_register(void)
- 
- 		return platform_device_register(&mtd_dev);
- 	case BCM63XX_FLASH_TYPE_SERIAL:
--		pr_warn("unsupported serial flash detected\n");
--		return -ENODEV;
-+		np = of_find_compatible_node(NULL, NULL, "jedec,spi-nor");
-+		if (np) {
-+			bcm63xx_of_update_spi_flash_speed(np, bcm63xx_spi_flash_info[0].max_speed_hz);
-+			of_node_put(np);
-+			return 0;
-+		} else {
-+			return -ENODEV;
-+		}
- 	case BCM63XX_FLASH_TYPE_NAND:
- 		pr_warn("unsupported NAND flash detected\n");
- 		return -ENODEV;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -709,6 +709,7 @@
- #define GPIO_STRAPBUS_REG		0x40
- #define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
- #define STRAPBUS_6358_BOOT_SEL_SERIAL	(0 << 1)
-+#define STRAPBUS_6368_SPI_CLK_FAST	(1 << 6)
- #define STRAPBUS_6368_BOOT_SEL_MASK	0x3
- #define STRAPBUS_6368_BOOT_SEL_NAND	0
- #define STRAPBUS_6368_BOOT_SEL_SERIAL	1
-@@ -1565,6 +1566,7 @@
- #define IDDQ_CTRL_63268_USBH		(1 << 4)
- 
- #define MISC_STRAPBUS_6328_REG		0x240
-+#define STRAPBUS_6328_HSSPI_CLK_FAST	(1 << 4)
- #define STRAPBUS_6328_FCVO_SHIFT	7
- #define STRAPBUS_6328_FCVO_MASK		(0x1f << STRAPBUS_6328_FCVO_SHIFT)
- #define STRAPBUS_6328_BOOT_SEL_SERIAL	(1 << 18)
diff --git a/target/linux/bcm63xx/patches-5.4/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/bcm63xx/patches-5.4/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
deleted file mode 100644
index 16d47b4c58..0000000000
--- a/target/linux/bcm63xx/patches-5.4/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From 8879e209111192c5e9752d7bd203cf7582693328 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:40:03 +0200
-Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c           |    9 ++++++++-
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |   10 ++++++++++
- 2 files changed, 18 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -31,6 +31,7 @@
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include <pci_ath9k_fixup.h>
- 
- #include "board_common.h"
- 
-@@ -177,6 +178,7 @@ static struct of_device_id of_ids[] = {
- int __init board_register_devices(void)
- {
- 	int usbh_ports = 0;
-+	int i;
- 
- #if CONFIG_OF
- 	if (of_have_populated_dt()) {
-@@ -241,6 +243,10 @@ int __init board_register_devices(void)
- 					board.ephy_reset_gpio_flags);
- 	}
- 
-+	/* register any fixups */
-+	for (i = 0; i < board.has_caldata; i++)
-+		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+
- 	return 0;
- }
- 
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -9,6 +9,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_fallback_sprom.h>
-+#include <pci_ath9k_fixup.h>
- 
- /*
-  * flash mapping
-@@ -16,6 +17,11 @@
- #define BCM963XX_CFE_VERSION_OFFSET	0x570
- #define BCM963XX_NVRAM_OFFSET		0x580
- 
-+struct ath9k_caldata {
-+	unsigned int	slot;
-+	u32		caldata_offset;
-+};
-+
- /*
-  * board definition
-  */
-@@ -33,6 +39,10 @@ struct board_info {
- 	unsigned int	has_ehci0:1;
- 	unsigned int	has_usbd:1;
- 	unsigned int	use_fallback_sprom:1;
-+	unsigned int	has_caldata:2;
-+
-+	/* wifi calibration data config */
-+	struct ath9k_caldata caldata[2];
- 
- 	/* ethernet config */
- 	struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/bcm63xx/patches-5.4/415-MIPS-BCM63XX-export-the-attached-flash-type.patch b/target/linux/bcm63xx/patches-5.4/415-MIPS-BCM63XX-export-the-attached-flash-type.patch
deleted file mode 100644
index 729430325a..0000000000
--- a/target/linux/bcm63xx/patches-5.4/415-MIPS-BCM63XX-export-the-attached-flash-type.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 066f1e37742ee434496d32a41a9284458de96742 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 13 Jan 2014 12:12:30 +0100
-Subject: [PATCH] MIPS: BCM63XX: export the attached flash type
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                          | 5 +++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 ++
- 2 files changed, 7 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -271,3 +271,8 @@ int __init bcm63xx_flash_register(void)
- 		return -ENODEV;
- 	}
- }
-+
-+int bcm63xx_flash_get_type(void)
-+{
-+	return flash_type;
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -14,4 +14,6 @@ void bcm63xx_flash_force_phys_base_addre
- 
- int __init bcm63xx_flash_register(void);
- 
-+int bcm63xx_flash_get_type(void);
-+
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/bcm63xx/patches-5.4/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/bcm63xx/patches-5.4/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
deleted file mode 100644
index d83d2cec7b..0000000000
--- a/target/linux/bcm63xx/patches-5.4/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
+++ /dev/null
@@ -1,238 +0,0 @@
-From bbebbf735a02b6d044ed928978ab4bd5f1833364 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:36:11 +0200
-Subject: [PATCH 61/72] BCM63XX: add a fixup for ath9k devices
-
----
- arch/mips/bcm63xx/Makefile                         |    3 +-
- arch/mips/bcm63xx/pci-ath9k-fixup.c                |  190 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/pci_ath9k_fixup.h     |    7 +
- 3 files changed, 199 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/pci-ath9k-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -3,7 +3,7 @@ obj-y		+= clk.o cpu.o cs.o gpio.o irq.o
- 		   setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
- 		   dev-rng.o dev-wdt.o \
- 		   dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
--		   sprom.o
-+		   pci-ath9k-fixup.o sprom.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -0,0 +1,201 @@
-+/*
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copytight (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Atheros AP94 reference board PCI initialization
-+ *
-+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/ath9k_platform.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <pci_ath9k_fixup.h>
-+
-+#define bcm_hsspi_writel(v, o)	bcm_rset_writel(RSET_HSSPI, (v), (o))
-+
-+struct ath9k_fixup {
-+	unsigned slot;
-+	u8 mac[ETH_ALEN];
-+	struct ath9k_platform_data pdata;
-+};
-+
-+static int ath9k_num_fixups;
-+static struct ath9k_fixup ath9k_fixups[2] = {
-+	{
-+		.slot = 255,
-+		.pdata = {
-+			.led_pin	= -1,
-+		},
-+	},
-+	{
-+		.slot = 255,
-+		.pdata = {
-+			.led_pin	= -1,
-+		},
-+	},
-+};
-+
-+static u16 *bcm63xx_read_eeprom(u16 *eeprom, u32 offset)
-+{
-+	u32 addr;
-+
-+	if (BCMCPU_IS_6328()) {
-+		addr = 0x18000000;
-+	} else {
-+		addr = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+		addr &= MPI_CSBASE_BASE_MASK;
-+	}
-+
-+	switch (bcm63xx_flash_get_type()) {
-+	case BCM63XX_FLASH_TYPE_PARALLEL:
-+		memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+		return eeprom;
-+	case BCM63XX_FLASH_TYPE_SERIAL:
-+		/* the first megabyte is memory mapped */
-+		if (offset < 0x100000) {
-+			memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+			return eeprom;
-+		}
-+
-+		if (BCMCPU_IS_6328()) {
-+			/* we can change the memory mapped megabyte */
-+			bcm_hsspi_writel(offset & 0xf00000, 0x18);
-+			memcpy(eeprom, (void *)KSEG1ADDR(addr + (offset & 0xfffff)), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+			bcm_hsspi_writel(0, 0x18);
-+			return eeprom;
-+		}
-+		/* can't do anything here without talking to the SPI controller. */
-+		/* Fall through */
-+	case BCM63XX_FLASH_TYPE_NAND:
-+	default:
-+		return NULL;
-+	}
-+}
-+
-+static void ath9k_pci_fixup(struct pci_dev *dev)
-+{
-+	void __iomem *mem;
-+	struct ath9k_platform_data *pdata = NULL;
-+	struct pci_dev *bridge = pci_upstream_bridge(dev);
-+	u16 *cal_data = NULL;
-+	u16 cmd;
-+	u32 bar0;
-+	u32 val;
-+	unsigned i;
-+
-+	for (i = 0; i < ath9k_num_fixups; i++) {
-+		if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
-+			continue;
-+
-+		cal_data = ath9k_fixups[i].pdata.eeprom_data;
-+		pdata = &ath9k_fixups[i].pdata;
-+		break;
-+	}
-+
-+	if (cal_data == NULL)
-+		return;
-+
-+	if (*cal_data != 0xa55a) {
-+		pr_err("pci %s: invalid calibration data\n", pci_name(dev));
-+		return;
-+	}
-+
-+	pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-+
-+	switch (bcm63xx_get_cpu_id()) {
-+	case BCM6328_CPU_ID:
-+		val = BCM_PCIE_MEM_BASE_PA_6328;
-+		break;
-+	case BCM6348_CPU_ID:
-+	case BCM6358_CPU_ID:
-+	case BCM6368_CPU_ID:
-+		val = BCM_PCI_MEM_BASE_PA;
-+		break;
-+	default:
-+		BUG();
-+	}
-+
-+	mem = ioremap(val, 0x10000);
-+	if (!mem) {
-+		pr_err("pci %s: ioremap error\n", pci_name(dev));
-+		return;
-+	}
-+
-+	if (bridge)
-+		pci_enable_device(bridge);
-+
-+	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, val);
-+
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-+	pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+	/* set offset to first reg address */
-+	cal_data += 3;
-+	while(*cal_data != 0xffff) {
-+		u32 reg;
-+		reg = *cal_data++;
-+		val = *cal_data++;
-+		val |= (*cal_data++) << 16;
-+
-+		writel(val, mem + reg);
-+		udelay(100);
-+	}
-+
-+	pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
-+	dev->vendor = val & 0xffff;
-+	dev->device = (val >> 16) & 0xffff;
-+
-+	pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
-+	dev->revision = val & 0xff;
-+	dev->class = val >> 8; /* upper 3 bytes */
-+
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-+	pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-+
-+	if (bridge)
-+		pci_disable_device(bridge);
-+
-+	iounmap(mem);
-+
-+	dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
-+
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+{
-+	if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-+		return;
-+
-+	ath9k_fixups[ath9k_num_fixups].slot = slot;
-+
-+	if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-+		return;
-+
-+	if (bcm63xx_nvram_get_mac_address(ath9k_fixups[ath9k_num_fixups].mac))
-+		return;
-+
-+	ath9k_fixups[ath9k_num_fixups].pdata.macaddr = ath9k_fixups[ath9k_num_fixups].mac;
-+	ath9k_num_fixups++;
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -0,0 +1,7 @@
-+#ifndef _PCI_ATH9K_FIXUP
-+#define _PCI_ATH9K_FIXUP
-+
-+
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+
-+#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/bcm63xx/patches-5.4/420-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/bcm63xx/patches-5.4/420-BCM63XX-add-endian-check-for-ath9k.patch
deleted file mode 100644
index 332b2394e1..0000000000
--- a/target/linux/bcm63xx/patches-5.4/420-BCM63XX-add-endian-check-for-ath9k.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -2,6 +2,7 @@
- #define _PCI_ATH9K_FIXUP
- 
- 
--void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+	unsigned endian_check) __init;
- 
- #endif /* _PCI_ATH9K_FIXUP */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -20,6 +20,7 @@
- struct ath9k_caldata {
- 	unsigned int	slot;
- 	u32		caldata_offset;
-+	unsigned int	endian_check:1;
- };
- 
- /*
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -183,12 +183,14 @@ static void ath9k_pci_fixup(struct pci_d
- }
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
- 
--void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+	unsigned endian_check)
- {
- 	if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
- 		return;
- 
- 	ath9k_fixups[ath9k_num_fixups].slot = slot;
-+	ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
- 
- 	if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
- 		return;
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -245,7 +245,8 @@ int __init board_register_devices(void)
- 
- 	/* register any fixups */
- 	for (i = 0; i < board.has_caldata; i++)
--		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
-+			board.caldata[i].endian_check);
- 
- 	return 0;
- }
diff --git a/target/linux/bcm63xx/patches-5.4/421-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/bcm63xx/patches-5.4/421-BCM63XX-add-led-pin-for-ath9k.patch
deleted file mode 100644
index 1f28198c4a..0000000000
--- a/target/linux/bcm63xx/patches-5.4/421-BCM63XX-add-led-pin-for-ath9k.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -246,7 +246,7 @@ int __init board_register_devices(void)
- 	/* register any fixups */
- 	for (i = 0; i < board.has_caldata; i++)
- 		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--			board.caldata[i].endian_check);
-+			board.caldata[i].endian_check, board.caldata[i].led_pin, board.caldata[i].led_active_high);
- 
- 	return 0;
- }
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -184,13 +184,15 @@ static void ath9k_pci_fixup(struct pci_d
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
- 
- void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
--	unsigned endian_check)
-+	unsigned endian_check, int led_pin, bool led_active_high)
- {
- 	if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
- 		return;
- 
- 	ath9k_fixups[ath9k_num_fixups].slot = slot;
- 	ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
-+	ath9k_fixups[ath9k_num_fixups].pdata.led_pin = led_pin;
-+	ath9k_fixups[ath9k_num_fixups].pdata.led_active_high = led_active_high;
- 
- 	if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
- 		return;
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -21,6 +21,8 @@ struct ath9k_caldata {
- 	unsigned int	slot;
- 	u32		caldata_offset;
- 	unsigned int	endian_check:1;
-+	int		led_pin;
-+	bool		led_active_high;
- };
- 
- /*
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -3,6 +3,6 @@
- 
- 
- void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
--	unsigned endian_check) __init;
-+	unsigned endian_check, int led_pin, bool led_active_high) __init;
- 
- #endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/bcm63xx/patches-5.4/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/bcm63xx/patches-5.4/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
deleted file mode 100644
index cc980a14d4..0000000000
--- a/target/linux/bcm63xx/patches-5.4/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
+++ /dev/null
@@ -1,185 +0,0 @@
-From 5ed5b5e9614fa5b02da699ab565af76c7e63d64d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 7 Jan 2013 17:45:39 +0100
-Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
-
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |   17 ++++-
- arch/mips/bcm63xx/dev-flash.c                      |    2 +-
- arch/mips/bcm63xx/pci-rt2x00-fixup.c               |   71 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h   |    2 +-
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    9 ++-
- .../include/asm/mach-bcm63xx/pci_rt2x00_fixup.h    |    9 +++
- 7 files changed, 104 insertions(+), 8 deletions(-)
- create mode 100644 arch/mips/bcm63xx/pci-rt2x00-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -3,7 +3,7 @@ obj-y		+= clk.o cpu.o cs.o gpio.o irq.o
- 		   setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
- 		   dev-rng.o dev-wdt.o \
- 		   dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
--		   pci-ath9k-fixup.o sprom.o
-+		   pci-ath9k-fixup.o pci-rt2x00-fixup.o sprom.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -32,6 +32,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- 
- #include "board_common.h"
- 
-@@ -244,9 +245,19 @@ int __init board_register_devices(void)
- 	}
- 
- 	/* register any fixups */
--	for (i = 0; i < board.has_caldata; i++)
--		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--			board.caldata[i].endian_check, board.caldata[i].led_pin, board.caldata[i].led_active_high);
-+	for (i = 0; i < board.has_caldata; i++) {
-+		switch (board.caldata[i].vendor) {
-+		case PCI_VENDOR_ID_ATHEROS:
-+			pci_enable_ath9k_fixup(board.caldata[i].slot,
-+				board.caldata[i].caldata_offset, board.caldata[i].endian_check,
-+				board.caldata[i].led_pin, board.caldata[i].led_active_high);
-+			break;
-+		case PCI_VENDOR_ID_RALINK:
-+			pci_enable_rt2x00_fixup(board.caldata[i].slot,
-+				board.caldata[i].eeprom);
-+			break;
-+		}
-+	}
- 
- 	return 0;
- }
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c
-@@ -0,0 +1,72 @@
-+/*
-+ *  Broadcom BCM63XX RT2x00 EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 �lvaro Fernández Rojas <noltari@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/rt2x00_platform.h>
-+
-+#include <bcm63xx_nvram.h>
-+#include <pci_rt2x00_fixup.h>
-+
-+struct rt2x00_fixup {
-+	unsigned slot;
-+	u8 mac[ETH_ALEN];
-+	struct rt2x00_platform_data pdata;
-+};
-+
-+static int rt2x00_num_fixups;
-+static struct rt2x00_fixup rt2x00_fixups[2] = {
-+	{
-+		.slot = 255,
-+	},
-+	{
-+		.slot = 255,
-+	},
-+};
-+
-+static void rt2x00_pci_fixup(struct pci_dev *dev)
-+{
-+	unsigned i;
-+	struct rt2x00_platform_data *pdata = NULL;
-+
-+	for (i = 0; i < rt2x00_num_fixups; i++) {
-+		if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn))
-+			continue;
-+
-+		pdata = &rt2x00_fixups[i].pdata;
-+		break;
-+	}
-+
-+	dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup);
-+
-+void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom)
-+{
-+	if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups))
-+		return;
-+
-+	rt2x00_fixups[rt2x00_num_fixups].slot = slot;
-+	rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
-+
-+	if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac))
-+		return;
-+
-+	rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac;
-+	rt2x00_num_fixups++;
-+}
-+
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -10,6 +10,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_fallback_sprom.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- 
- /*
-  * flash mapping
-@@ -17,12 +18,16 @@
- #define BCM963XX_CFE_VERSION_OFFSET	0x570
- #define BCM963XX_NVRAM_OFFSET		0x580
- 
--struct ath9k_caldata {
-+struct bcm63xx_caldata {
-+	unsigned int	vendor;
- 	unsigned int	slot;
- 	u32		caldata_offset;
-+	/* Atheros */
- 	unsigned int	endian_check:1;
- 	int		led_pin;
- 	bool		led_active_high;
-+	/* Ralink */
-+	char*		eeprom;
- };
- 
- /*
-@@ -45,7 +50,7 @@ struct board_info {
- 	unsigned int	has_caldata:2;
- 
- 	/* wifi calibration data config */
--	struct ath9k_caldata caldata[2];
-+	struct bcm63xx_caldata caldata[2];
- 
- 	/* ethernet config */
- 	struct bcm63xx_enet_platform_data enet0;
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-@@ -0,0 +1,9 @@
-+#ifndef _PCI_RT2X00_FIXUP
-+#define _PCI_RT2X00_FIXUP
-+
-+#define PCI_VENDOR_ID_RALINK 0x1814
-+
-+void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init;
-+
-+#endif /* _PCI_RT2X00_FIXUP */
-+
diff --git a/target/linux/bcm63xx/patches-5.4/423-bcm63xx_enet_add_b53_support.patch b/target/linux/bcm63xx/patches-5.4/423-bcm63xx_enet_add_b53_support.patch
deleted file mode 100644
index 36b8579ca6..0000000000
--- a/target/linux/bcm63xx/patches-5.4/423-bcm63xx_enet_add_b53_support.patch
+++ /dev/null
@@ -1,169 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -338,6 +338,9 @@ struct bcm_enet_priv {
- 	struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
- 	int sw_port_link[ENETSW_MAX_PORT];
- 
-+	/* platform device for associated switch */
-+	struct platform_device *b53_device;
-+
- 	/* used to poll switch port state */
- 	struct timer_list swphy_poll;
- 	spinlock_t enetsw_mdio_lock;
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -17,6 +17,7 @@
- #include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/if_vlan.h>
-+#include <linux/platform_data/b53.h>
- 
- #include <bcm63xx_dev_enet.h>
- #include "bcm63xx_enet.h"
-@@ -1932,7 +1933,8 @@ static int bcm_enet_remove(struct platfo
- 	return 0;
- }
- 
--struct platform_driver bcm63xx_enet_driver = {
-+
-+static struct platform_driver bcm63xx_enet_driver = {
- 	.probe	= bcm_enet_probe,
- 	.remove	= bcm_enet_remove,
- 	.driver	= {
-@@ -1941,6 +1943,42 @@ struct platform_driver bcm63xx_enet_driv
- 	},
- };
- 
-+struct b53_platform_data bcm63xx_b53_pdata = {
-+	.chip_id = 0x6300,
-+	.big_endian = 1,
-+};
-+
-+struct platform_device bcm63xx_b53_dev = {
-+	.name		= "b53-switch",
-+	.id		= -1,
-+	.dev		= {
-+		.platform_data = &bcm63xx_b53_pdata,
-+	},
-+};
-+
-+static int bcmenet_switch_register(struct bcm_enet_priv *priv, u16 port_mask)
-+{
-+	int ret;
-+
-+	bcm63xx_b53_pdata.regs = priv->base;
-+	bcm63xx_b53_pdata.enabled_ports = port_mask;
-+	bcm63xx_b53_pdata.alias = priv->net_dev->name;
-+
-+	ret = platform_device_register(&bcm63xx_b53_dev);
-+	if (!ret)
-+		priv->b53_device = &bcm63xx_b53_dev;
-+
-+	return ret;
-+}
-+
-+static void bcmenet_switch_unregister(struct bcm_enet_priv *priv)
-+{
-+	if (priv->b53_device)
-+		platform_device_unregister(&bcm63xx_b53_dev);
-+
-+	priv->b53_device = NULL;
-+}
-+
- /*
-  * switch mii access callbacks
-  */
-@@ -2197,29 +2235,6 @@ static int bcm_enetsw_open(struct net_de
- 		enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
- 	}
- 
--	/* reset mib */
--	val = enetsw_readb(priv, ENETSW_GMCR_REG);
--	val |= ENETSW_GMCR_RST_MIB_MASK;
--	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--	mdelay(1);
--	val &= ~ENETSW_GMCR_RST_MIB_MASK;
--	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--	mdelay(1);
--
--	/* force CPU port state */
--	val = enetsw_readb(priv, ENETSW_IMPOV_REG);
--	val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
--	enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
--
--	/* enable switch forward engine */
--	val = enetsw_readb(priv, ENETSW_SWMODE_REG);
--	val |= ENETSW_SWMODE_FWD_EN_MASK;
--	enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
--
--	/* enable jumbo on all ports */
--	enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
--	enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
--
- 	/* initialize flow control buffer allocation */
- 	enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
- 			ENETDMA_BUFALLOC_REG(priv->rx_chan));
-@@ -2655,6 +2670,9 @@ static int bcm_enetsw_probe(struct platf
- 	struct bcm63xx_enetsw_platform_data *pd;
- 	struct resource *res_mem;
- 	int ret, irq_rx, irq_tx;
-+	unsigned i, num_ports = 0;
-+	u16 port_mask = BIT(8);
-+	u8 val;
- 
- 	if (!bcm_enet_shared_base[0])
- 		return -EPROBE_DEFER;
-@@ -2735,6 +2753,43 @@ static int bcm_enetsw_probe(struct platf
- 	priv->pdev = pdev;
- 	priv->net_dev = dev;
- 
-+	/* reset mib */
-+	val = enetsw_readb(priv, ENETSW_GMCR_REG);
-+	val |= ENETSW_GMCR_RST_MIB_MASK;
-+	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+	mdelay(1);
-+	val &= ~ENETSW_GMCR_RST_MIB_MASK;
-+	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+	mdelay(1);
-+
-+	/* force CPU port state */
-+	val = enetsw_readb(priv, ENETSW_IMPOV_REG);
-+	val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
-+	enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
-+
-+	/* enable switch forward engine */
-+	val = enetsw_readb(priv, ENETSW_SWMODE_REG);
-+	val |= ENETSW_SWMODE_FWD_EN_MASK;
-+	enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
-+
-+	/* enable jumbo on all ports */
-+	enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
-+	enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
-+
-+	for (i = 0; i < priv->num_ports; i++) {
-+		struct bcm63xx_enetsw_port *port = &priv->used_ports[i];
-+
-+		if (!port->used)
-+			continue;
-+
-+		num_ports++;
-+		port_mask |= BIT(i);
-+	}
-+
-+	/* only register if there is more than one external port */
-+	if (num_ports > 1)
-+		bcmenet_switch_register(priv, port_mask);
-+
- 	return 0;
- 
- out_disable_clk:
-@@ -2756,6 +2811,9 @@ static int bcm_enetsw_remove(struct plat
- 	priv = netdev_priv(dev);
- 	unregister_netdev(dev);
- 
-+	/* remove switch */
-+	bcmenet_switch_unregister(priv);
-+
- 	clk_disable_unprepare(priv->mac_clk);
- 
- 	free_netdev(dev);
diff --git a/target/linux/bcm63xx/patches-5.4/424-bcm63xx_enet_no_request_mem_region.patch b/target/linux/bcm63xx/patches-5.4/424-bcm63xx_enet_no_request_mem_region.patch
deleted file mode 100644
index e87731a1c5..0000000000
--- a/target/linux/bcm63xx/patches-5.4/424-bcm63xx_enet_no_request_mem_region.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2714,9 +2714,9 @@ static int bcm_enetsw_probe(struct platf
- 	if (ret)
- 		goto out;
- 
--	priv->base = devm_ioremap_resource(&pdev->dev, res_mem);
--	if (IS_ERR(priv->base)) {
--		ret = PTR_ERR(priv->base);
-+ 	priv->base = devm_ioremap(&pdev->dev, res_mem->start, resource_size(res_mem));
-+ 	if (priv->base == NULL) {
-+		ret = -ENOMEM;
- 		goto out;
- 	}
- 
diff --git a/target/linux/bcm63xx/patches-5.4/427-boards_probe_switch.patch b/target/linux/bcm63xx/patches-5.4/427-boards_probe_switch.patch
deleted file mode 100644
index 0c00ff0da7..0000000000
--- a/target/linux/bcm63xx/patches-5.4/427-boards_probe_switch.patch
+++ /dev/null
@@ -1,119 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -77,6 +77,8 @@ static struct board_info __initdata boar
- 
- 	.has_enet0			= 1,
- 	.enet0 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -90,6 +92,8 @@ static struct board_info __initdata boar
- 
- 	.has_enet0			= 1,
- 	.enet0 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -138,6 +142,8 @@ static struct board_info __initdata boar
- 		.use_internal_phy	= 1,
- 	},
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -162,6 +168,8 @@ static struct board_info __initdata boar
- 	},
- 
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -186,6 +194,8 @@ static struct board_info __initdata boar
- 		.use_internal_phy	= 1,
- 	},
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -208,6 +218,8 @@ static struct board_info __initdata boar
- 	},
- 
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -231,6 +243,8 @@ static struct board_info __initdata boar
- 		.use_internal_phy	= 1,
- 	},
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -251,6 +265,8 @@ static struct board_info __initdata boar
- 		.use_internal_phy	= 1,
- 	},
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -270,6 +286,8 @@ static struct board_info __initdata boar
- 		.use_internal_phy	= 1,
- 	},
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -297,6 +315,8 @@ static struct board_info __initdata boar
- 	},
- 
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -321,6 +341,8 @@ static struct board_info __initdata boar
- 	},
- 
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -346,6 +368,8 @@ static struct board_info __initdata boar
- 	},
- 
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -369,6 +393,8 @@ static struct board_info __initdata boar
- 	},
- 
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
diff --git a/target/linux/bcm63xx/patches-5.4/428-bcm63xx_enet-rgmii-ctrl-fix.patch b/target/linux/bcm63xx/patches-5.4/428-bcm63xx_enet-rgmii-ctrl-fix.patch
deleted file mode 100644
index 4c5e43cb0e..0000000000
--- a/target/linux/bcm63xx/patches-5.4/428-bcm63xx_enet-rgmii-ctrl-fix.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -79,6 +79,9 @@ struct bcm63xx_enetsw_port {
- 	int		force_speed;
- 	int		force_duplex_full;
- 
-+	int		mii_override;
-+	int		timing_sel;
-+
- 	const char	*name;
- };
- 
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2232,6 +2232,10 @@ static int bcm_enetsw_open(struct net_de
- 
- 		rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
- 		rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
-+		if (priv->used_ports[i].mii_override)
-+			rgmii_ctrl |= ENETSW_RGMII_CTRL_MII_OVERRIDE_EN;
-+		if (priv->used_ports[i].timing_sel)
-+			rgmii_ctrl |= ENETSW_RGMII_CTRL_TIMING_SEL_EN;
- 		enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
- 	}
- 
diff --git a/target/linux/bcm63xx/patches-5.4/430-MIPS-BCM63XX-add-nand-clocks.patch b/target/linux/bcm63xx/patches-5.4/430-MIPS-BCM63XX-add-nand-clocks.patch
deleted file mode 100644
index a29c3b780b..0000000000
--- a/target/linux/bcm63xx/patches-5.4/430-MIPS-BCM63XX-add-nand-clocks.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -430,6 +430,23 @@ static struct clk clk_pcie = {
- };
- 
- /*
-+ * NAND clock
-+ */
-+static void nand_set(struct clk *clk, int enable)
-+{
-+	if (BCMCPU_IS_6362())
-+		bcm_hwclock_set(CKCTL_6362_NAND_EN, enable);
-+	else if (BCMCPU_IS_6368())
-+		bcm_hwclock_set(CKCTL_6368_NAND_EN, enable);
-+	else if (BCMCPU_IS_63268())
-+		bcm_hwclock_set(CKCTL_63268_NAND_EN, enable);
-+}
-+
-+static struct clk clk_nand = {
-+	.set	= nand_set,
-+};
-+
-+/*
-  * Internal peripheral clock
-  */
- static struct clk clk_periph = {
-@@ -624,6 +641,7 @@ static struct clk_lookup bcm6362_clks[]
- 	CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
- 	CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
- 	/* gated clocks */
-+	CLKDEV_INIT(NULL, "nand", &clk_nand),
- 	CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
- 	CLKDEV_INIT(NULL, "usbh", &clk_usbh),
- 	CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-@@ -641,6 +659,7 @@ static struct clk_lookup bcm6368_clks[]
- 	CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
- 	CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
- 	/* gated clocks */
-+	CLKDEV_INIT(NULL, "nand", &clk_nand),
- 	CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
- 	CLKDEV_INIT(NULL, "usbh", &clk_usbh),
- 	CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-@@ -659,6 +678,7 @@ static struct clk_lookup bcm63268_clks[]
- 	CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
- 	CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
- 	/* gated clocks */
-+	CLKDEV_INIT(NULL, "nand", &clk_nand),
- 	CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
- 	CLKDEV_INIT(NULL, "usbh", &clk_usbh),
- 	CLKDEV_INIT(NULL, "usbd", &clk_usbd),
diff --git a/target/linux/bcm63xx/patches-5.4/431-MIPS-BCM63XX-add-nand-rset.patch b/target/linux/bcm63xx/patches-5.4/431-MIPS-BCM63XX-add-nand-rset.patch
deleted file mode 100644
index 090ffeb43c..0000000000
--- a/target/linux/bcm63xx/patches-5.4/431-MIPS-BCM63XX-add-nand-rset.patch
+++ /dev/null
@@ -1,145 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -184,7 +184,8 @@ enum bcm63xx_regs_set {
- 	RSET_PCMDMAC,
- 	RSET_PCMDMAS,
- 	RSET_RNG,
--	RSET_MISC
-+	RSET_MISC,
-+	RSET_NAND
- };
- 
- #define RSET_DSL_LMEM_SIZE		(64 * 1024 * 4)
-@@ -262,6 +263,7 @@ enum bcm63xx_regs_set {
- #define BCM_3368_PCMDMAS_BASE		(0xdeadbeef)
- #define BCM_3368_RNG_BASE		(0xdeadbeef)
- #define BCM_3368_MISC_BASE		(0xdeadbeef)
-+#define BCM_3368_NAND_BASE		(0xdeadbeef)
- 
- /*
-  * 6318 register sets base address
-@@ -309,6 +311,7 @@ enum bcm63xx_regs_set {
- #define BCM_6318_PCMDMAS_BASE		(0xdeadbeef)
- #define BCM_6318_RNG_BASE		(0xdeadbeef)
- #define BCM_6318_MISC_BASE		(0xb0000280)
-+#define BCM_6318_NAND_BASE		(0xdeadbeef)
- #define BCM_6318_OTP_BASE		(0xdeadbeef)
- 
- #define BCM_6318_STRAP_BASE		(0xb0000900)
-@@ -359,6 +362,7 @@ enum bcm63xx_regs_set {
- #define BCM_6328_PCMDMAS_BASE		(0xdeadbeef)
- #define BCM_6328_RNG_BASE		(0xdeadbeef)
- #define BCM_6328_MISC_BASE		(0xb0001800)
-+#define BCM_6328_NAND_BASE		(0xb0000200)
- #define BCM_6328_OTP_BASE		(0xb0000600)
- 
- /*
-@@ -408,6 +412,7 @@ enum bcm63xx_regs_set {
- #define BCM_6338_PCMDMAS_BASE		(0xdeadbeef)
- #define BCM_6338_RNG_BASE		(0xdeadbeef)
- #define BCM_6338_MISC_BASE		(0xdeadbeef)
-+#define BCM_6338_NAND_BASE		(0xdeadbeef)
- 
- /*
-  * 6345 register sets base address
-@@ -456,6 +461,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_PCMDMAS_BASE		(0xdeadbeef)
- #define BCM_6345_RNG_BASE		(0xdeadbeef)
- #define BCM_6345_MISC_BASE		(0xdeadbeef)
-+#define BCM_6345_NAND_BASE		(0xdeadbeef)
- 
- /*
-  * 6348 register sets base address
-@@ -502,6 +508,7 @@ enum bcm63xx_regs_set {
- #define BCM_6348_PCMDMAS_BASE		(0xdeadbeef)
- #define BCM_6348_RNG_BASE		(0xdeadbeef)
- #define BCM_6348_MISC_BASE		(0xdeadbeef)
-+#define BCM_6348_NAND_BASE		(0xdeadbeef)
- 
- /*
-  * 6358 register sets base address
-@@ -548,7 +555,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_PCMDMAS_BASE		(0xfffe1a00)
- #define BCM_6358_RNG_BASE		(0xdeadbeef)
- #define BCM_6358_MISC_BASE		(0xdeadbeef)
--
-+#define BCM_6358_NAND_BASE		(0xdeadbeef)
- 
- /*
-  * 6362 register sets base address
-@@ -596,6 +603,7 @@ enum bcm63xx_regs_set {
- #define BCM_6362_PCMDMAS_BASE		(0xdeadbeef)
- #define BCM_6362_RNG_BASE		(0xdeadbeef)
- #define BCM_6362_MISC_BASE		(0xb0001800)
-+#define BCM_6362_NAND_BASE		(0xb0000200)
- 
- #define BCM_6362_NAND_REG_BASE		(0xb0000200)
- #define BCM_6362_NAND_CACHE_BASE	(0xb0000600)
-@@ -651,6 +659,7 @@ enum bcm63xx_regs_set {
- #define BCM_6368_PCMDMAS_BASE		(0xb0005c00)
- #define BCM_6368_RNG_BASE		(0xb0004180)
- #define BCM_6368_MISC_BASE		(0xdeadbeef)
-+#define BCM_6368_NAND_BASE		(0xb0000200)
- 
- /*
-  * 63268 register sets base address
-@@ -698,6 +707,7 @@ enum bcm63xx_regs_set {
- #define BCM_63268_PCMDMAS_BASE		(0xdeadbeef)
- #define BCM_63268_RNG_BASE		(0xdeadbeef)
- #define BCM_63268_MISC_BASE		(0xb0001800)
-+#define BCM_63268_NAND_BASE		(0xb0000200)
- 
- extern const unsigned long *bcm63xx_regs_base;
- 
-@@ -743,6 +753,7 @@ extern const unsigned long *bcm63xx_regs
- 	[RSET_PCMDMAS]		= BCM_## __cpu ##_PCMDMAS_BASE,		\
- 	[RSET_RNG]		= BCM_## __cpu ##_RNG_BASE,		\
- 	[RSET_MISC]		= BCM_## __cpu ##_MISC_BASE,		\
-+	[RSET_NAND]		= BCM_## __cpu ##_NAND_BASE,		\
- 
- 
- static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -111,5 +111,7 @@
- #define bcm_ddr_writel(v, o)	bcm_rset_writel(RSET_DDR, (v), (o))
- #define bcm_misc_readl(o)	bcm_rset_readl(RSET_MISC, (o))
- #define bcm_misc_writel(v, o)	bcm_rset_writel(RSET_MISC, (v), (o))
-+#define bcm_nand_readl(o)	bcm_rset_readl(RSET_NAND, (o))
-+#define bcm_nand_writel(v, o)	bcm_rset_writel(RSET_NAND, (v), (o))
- 
- #endif /* ! BCM63XX_IO_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1688,4 +1688,31 @@
- #define OTP_USER_BITS_6328_REG(i)	(0x20 + (i) * 4)
- #define   OTP_6328_REG3_TP1_DISABLED	BIT(9)
- 
-+/*************************************************************************
-+ * _REG relative to RSET_NAND
-+ *************************************************************************/
-+
-+#define NAND_CS_SEL_REG		0x14
-+#define NAND_CS_SEL_EBC_CS0_SEL	(1 << 0)
-+#define NAND_CS_SEL_EBC_CS1_SEL	(1 << 1)
-+#define NAND_CS_SEL_EBC_CS2_SEL	(1 << 2)
-+#define NAND_CS_SEL_EBC_CS3_SEL	(1 << 3)
-+#define NAND_CS_SEL_EBC_CS4_SEL	(1 << 4)
-+#define NAND_CS_SEL_EBC_CS5_SEL	(1 << 5)
-+#define NAND_CS_SEL_EBC_CS6_SEL	(1 << 6)
-+#define NAND_CS_SEL_EBC_CS7_SEL	(1 << 7)
-+#define NAND_CS_SEL_EBI_CS0_USES_NAND	(1 << 8)
-+#define NAND_CS_SEL_EBI_CS1_USES_NAND	(1 << 9)
-+#define NAND_CS_SEL_EBI_CS2_USES_NAND	(1 << 10)
-+#define NAND_CS_SEL_EBI_CS3_USES_NAND	(1 << 11)
-+#define NAND_CS_SEL_EBI_CS4_USES_NAND	(1 << 12)
-+#define NAND_CS_SEL_EBI_CS5_USES_NAND	(1 << 13)
-+#define NAND_CS_SEL_EBI_CS6_USES_NAND	(1 << 14)
-+#define NAND_CS_SEL_EBI_CS7_USES_NAND	(1 << 15)
-+#define NAND_CS_SEL_WR_PROT_BLK0	(1 << 28)
-+#define NAND_CS_SEL_AUTO_DEV_ID	(1 << 30)
-+#define NAND_CS_SEL_CS_LOCK		(1 << 31)
-+
-+#define NAND_CS_XOR_REG			0x18
-+
- #endif /* BCM63XX_REGS_H_ */
diff --git a/target/linux/bcm63xx/patches-5.4/432-MIPS-BCM63XX-detect-nand-nvram.patch b/target/linux/bcm63xx/patches-5.4/432-MIPS-BCM63XX-detect-nand-nvram.patch
deleted file mode 100644
index 5a2a5f2489..0000000000
--- a/target/linux/bcm63xx/patches-5.4/432-MIPS-BCM63XX-detect-nand-nvram.patch
+++ /dev/null
@@ -1,17 +0,0 @@
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -229,6 +229,14 @@ void __init bcm63xx_flash_detect(void)
- 		}
- 
- 		bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG);
-+	} else if (flash_type == BCM63XX_FLASH_TYPE_NAND &&
-+		   (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
-+		    BCMCPU_IS_63268())) {
-+		bcm_nand_writel(NAND_CS_SEL_AUTO_DEV_ID
-+				| NAND_CS_SEL_EBI_CS0_USES_NAND
-+				| NAND_CS_SEL_EBC_CS0_SEL,
-+				NAND_CS_SEL_REG);
-+		bcm_nand_writel(1, NAND_CS_XOR_REG);
- 	}
- }
- 
diff --git a/target/linux/bcm63xx/patches-5.4/433-MIPS-BCM63XX-enable-nand-support.patch b/target/linux/bcm63xx/patches-5.4/433-MIPS-BCM63XX-enable-nand-support.patch
deleted file mode 100644
index 7d63ee7983..0000000000
--- a/target/linux/bcm63xx/patches-5.4/433-MIPS-BCM63XX-enable-nand-support.patch
+++ /dev/null
@@ -1,17 +0,0 @@
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -271,8 +271,12 @@ int __init bcm63xx_flash_register(void)
- 			return -ENODEV;
- 		}
- 	case BCM63XX_FLASH_TYPE_NAND:
--		pr_warn("unsupported NAND flash detected\n");
--		return -ENODEV;
-+		if (board_of_device_present("nflash")) {
-+			return 0;
-+		} else {
-+			pr_warn("unsupported NAND flash detected\n");
-+			return -ENODEV;
-+		}
- 	default:
- 		pr_err("flash detection failed for BCM%x: %d\n",
- 		       bcm63xx_get_cpu_id(), flash_type);
diff --git a/target/linux/bcm63xx/patches-5.4/500-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch b/target/linux/bcm63xx/patches-5.4/500-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch
deleted file mode 100644
index 62f872dd32..0000000000
--- a/target/linux/bcm63xx/patches-5.4/500-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From e71eea9953c774dfadb754258824fb1888c279f4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 21 Nov 2014 16:54:06 +0100
-Subject: [PATCH 47/48] MIPS: BCM63XX: populate the compatible to board_info
- list
-
-Populate the compatible to board_info list to allow dtbs to be used
-for known boards.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   34 +++++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -439,6 +439,52 @@ static const struct board_info __initcon
- };
- 
- static struct of_device_id const bcm963xx_boards_dt[] = {
-+#ifdef CONFIG_OF
-+#ifdef CONFIG_BCM63XX_CPU_3368
-+	{ .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
-+#endif /* CONFIG_BCM63XX_CPU_3368 */
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+#endif /* CONFIG_BCM63XX_CPU_6318 */
-+#ifdef CONFIG_BCM63XX_CPU_6328
-+	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+#endif /* CONFIG_BCM63XX_CPU_6328 */
-+#ifdef CONFIG_BCM63XX_CPU_6338
-+	{ .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
-+	{ .compatible = "brcm,bcm96338w", .data = &board_96338w, },
-+#endif /* CONFIG_BCM63XX_CPU_6338 */
-+#ifdef CONFIG_BCM63XX_CPU_6345
-+	{ .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
-+#endif /* CONFIG_BCM63XX_CPU_6345 */
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+	{ .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
-+	{ .compatible = "brcm,bcm96348r", .data = &board_96348r, },
-+	{ .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
-+	{ .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
-+	{ .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+	{ .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-+	{ .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-+	{ .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-+	{ .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-+	{ .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-+	{ .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
-+#endif /* CONFIG_BCM63XX_CPU_6348 */
-+#ifdef CONFIG_BCM63XX_CPU_6358
-+	{ .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
-+	{ .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
-+	{ .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+	{ .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+	{ .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-+	{ .compatible = "pirelli,a226m", .data = &board_DWVS0, },
-+	{ .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
-+	{ .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-+#endif /* CONFIG_BCM63XX_CPU_6358 */
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+#endif /* CONFIG_BCM63XX_CPU_6362 */
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+#endif /* CONFIG_BCM63XX_CPU_6368 */
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+#endif /* CONFIG_BCM63XX_CPU_63268 */
-+#endif /* CONFIG_OF */
- 	{ },
- };
- 
diff --git a/target/linux/bcm63xx/patches-5.4/501-board_bcm6328-extend-96328avng-reference-board.patch b/target/linux/bcm63xx/patches-5.4/501-board_bcm6328-extend-96328avng-reference-board.patch
deleted file mode 100644
index d65b9413ec..0000000000
--- a/target/linux/bcm63xx/patches-5.4/501-board_bcm6328-extend-96328avng-reference-board.patch
+++ /dev/null
@@ -1,35 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -64,6 +64,32 @@ static struct board_info __initdata boar
- 		.use_fullspeed		= 0,
- 		.port_no		= 0,
- 	},
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
- };
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- 
diff --git a/target/linux/bcm63xx/patches-5.4/502-board-bcm6358-DWV-S0_fixes.patch b/target/linux/bcm63xx/patches-5.4/502-board-bcm6358-DWV-S0_fixes.patch
deleted file mode 100644
index 8019136861..0000000000
--- a/target/linux/bcm63xx/patches-5.4/502-board-bcm6358-DWV-S0_fixes.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -426,6 +426,7 @@ static struct board_info __initdata boar
- 	},
- 
- 	.has_ohci0			= 1,
-+	.has_ehci0			= 1,
- };
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- 
diff --git a/target/linux/bcm63xx/patches-5.4/511-board_bcm6318.patch b/target/linux/bcm63xx/patches-5.4/511-board_bcm6318.patch
deleted file mode 100644
index ef5989ba43..0000000000
--- a/target/linux/bcm63xx/patches-5.4/511-board_bcm6318.patch
+++ /dev/null
@@ -1,292 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -49,6 +49,263 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_3368 */
- 
- /*
-+ * known 6318 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+static struct board_info __initdata board_96318ref = {
-+	.name = "96318REF",
-+	.expected_cpu_id = 0x6318,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_usbd = 1,
-+	.usbd = {
-+		.use_fullspeed = 0,
-+		.port_no = 0,
-+	},
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_96318ref_p300 = {
-+	.name = "96318REF_P300",
-+	.expected_cpu_id = 0x6318,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_usbd = 1,
-+	.usbd = {
-+		.use_fullspeed = 0,
-+		.port_no = 0,
-+	},
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+};
-+
-+static struct sprom_fixup __initdata ar5315u_fixups[] = {
-+	{ .offset = 6, .value = 0x1c00 },
-+	{ .offset = 65, .value = 0x1255 },
-+	{ .offset = 97, .value = 0xfe55 },
-+	{ .offset = 98, .value = 0x171d },
-+	{ .offset = 99, .value = 0xfa42 },
-+	{ .offset = 113, .value = 0xfeb7 },
-+	{ .offset = 114, .value = 0x18cd },
-+	{ .offset = 115, .value = 0xfa4f },
-+	{ .offset = 162, .value = 0x6444 },
-+	{ .offset = 170, .value = 0x6444 },
-+	{ .offset = 172, .value = 0x6444 },
-+};
-+
-+static struct board_info __initdata board_AR5315u = {
-+	.name = "96318A-1441N1",
-+	.expected_cpu_id = 0x6318,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "LAN4",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "LAN3",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "LAN2",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "LAN1",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43217,
-+		.pci_bus = 1,
-+		.pci_dev = 0,
-+		.board_fixups = ar5315u_fixups,
-+		.num_board_fixups = ARRAY_SIZE(ar5315u_fixups),
-+	},
-+};
-+
-+static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
-+	{ .offset = 96, .value = 0x2046 },
-+	{ .offset = 97, .value = 0xfe9d },
-+	{ .offset = 98, .value = 0x1854 },
-+	{ .offset = 99, .value = 0xfa59 },
-+	{ .offset = 112, .value = 0x2046 },
-+	{ .offset = 113, .value = 0xfe79 },
-+	{ .offset = 114, .value = 0x17f5 },
-+	{ .offset = 115, .value = 0xfa47 },
-+	{ .offset = 161, .value = 0x2222 },
-+	{ .offset = 162, .value = 0x2222 },
-+	{ .offset = 169, .value = 0x2222 },
-+	{ .offset = 170, .value = 0x2222 },
-+	{ .offset = 171, .value = 0x5555 },
-+	{ .offset = 172, .value = 0x5555 },
-+	{ .offset = 173, .value = 0x4444 },
-+	{ .offset = 174, .value = 0x4444 },
-+	{ .offset = 175, .value = 0x5555 },
-+	{ .offset = 176, .value = 0x5555 },
-+};
-+
-+static struct board_info __initdata board_dsl_2751b_d1 = {
-+	.name = "AW5200B",
-+	.expected_cpu_id = 0x6318,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43217,
-+		.pci_bus = 1,
-+		.pci_dev = 0,
-+		.board_fixups = dsl2751b_e1_fixups,
-+		.num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups),
-+	},
-+};
-+
-+static struct board_info __initdata board_FAST2704N = {
-+	.name = "F@ST2704N",
-+	.expected_cpu_id = 0x6318,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43217,
-+		.pci_bus = 1,
-+		.pci_dev = 0,
-+	},
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6318 */
-+
-+/*
-  * known 6328 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_6328
-@@ -437,6 +694,13 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_3368
- 	&board_cvg834g,
- #endif /* CONFIG_BCM63XX_CPU_3368 */
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+	&board_96318ref,
-+	&board_96318ref_p300,
-+	&board_AR5315u,
-+	&board_dsl_2751b_d1,
-+	&board_FAST2704N,
-+#endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- 	&board_96328avng,
- #endif /* CONFIG_BCM63XX_CPU_6328 */
-@@ -471,6 +735,11 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
- #endif /* CONFIG_BCM63XX_CPU_3368 */
- #ifdef CONFIG_BCM63XX_CPU_6318
-+	{ .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-+	{ .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
-+	{ .compatible = "comtrend,ar-5315u", .data = &board_AR5315u, },
-+	{ .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
-+	{ .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- 	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
diff --git a/target/linux/bcm63xx/patches-5.4/512-board_bcm6328.patch b/target/linux/bcm63xx/patches-5.4/512-board_bcm6328.patch
deleted file mode 100644
index e28ff912cb..0000000000
--- a/target/linux/bcm63xx/patches-5.4/512-board_bcm6328.patch
+++ /dev/null
@@ -1,699 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -348,6 +348,651 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
-+
-+static struct board_info __initdata board_963281TAN = {
-+	.name = "963281TAN",
-+	.expected_cpu_id = 0x6328,
-+
-+	.has_pci = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_A4001N = {
-+	.name = "96328dg2x2",
-+	.expected_cpu_id = 0x6328,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43225,
-+		.pci_bus = 1,
-+		.pci_dev = 0,
-+	},
-+};
-+
-+static struct board_info __initdata board_A4001N1 = {
-+	.name = "963281T_TEF",
-+	.expected_cpu_id = 0x6328,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43225,
-+		.pci_bus = 1,
-+		.pci_dev = 0,
-+	},
-+};
-+
-+static struct sprom_fixup __initdata ad1018_fixups[] = {
-+	{ .offset = 6, .value = 0x1c00 },
-+	{ .offset = 65, .value = 0x1256 },
-+	{ .offset = 96, .value = 0x2046 },
-+	{ .offset = 97, .value = 0xfe69 },
-+	{ .offset = 98, .value = 0x1726 },
-+	{ .offset = 99, .value = 0xfa5c },
-+	{ .offset = 112, .value = 0x2046 },
-+	{ .offset = 113, .value = 0xfea8 },
-+	{ .offset = 114, .value = 0x1978 },
-+	{ .offset = 115, .value = 0xfa26 },
-+	{ .offset = 161, .value = 0x2222 },
-+	{ .offset = 169, .value = 0x2222 },
-+	{ .offset = 171, .value = 0x2222 },
-+	{ .offset = 173, .value = 0x2222 },
-+	{ .offset = 174, .value = 0x4444 },
-+	{ .offset = 175, .value = 0x2222 },
-+	{ .offset = 176, .value = 0x4444 },
-+};
-+
-+static struct board_info __initdata board_AD1018 = {
-+	.name = "96328avngr",
-+	.expected_cpu_id = 0x6328,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "FIBRE",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "LAN3",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "LAN2",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "LAN1",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43217,
-+		.pci_bus = 1,
-+		.pci_dev = 0,
-+		.board_fixups = ad1018_fixups,
-+		.num_board_fixups = ARRAY_SIZE(ad1018_fixups),
-+	},
-+};
-+
-+static struct sprom_fixup __initdata ar5381u_fixups[] = {
-+	{ .offset = 97, .value = 0xfee5 },
-+	{ .offset = 98, .value = 0x157c },
-+	{ .offset = 99, .value = 0xfae7 },
-+	{ .offset = 113, .value = 0xfefa },
-+	{ .offset = 114, .value = 0x15d6 },
-+	{ .offset = 115, .value = 0xfaf8 },
-+};
-+
-+static struct board_info __initdata board_AR5381u = {
-+	.name = "96328A-1241N",
-+	.expected_cpu_id = 0x6328,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43225,
-+		.pci_bus = 1,
-+		.pci_dev = 0,
-+		.board_fixups = ar5381u_fixups,
-+		.num_board_fixups = ARRAY_SIZE(ar5381u_fixups),
-+	},
-+};
-+
-+static struct sprom_fixup __initdata ar5387un_fixups[] = {
-+	{ .offset = 2, .value = 0x05bb },
-+	{ .offset = 65, .value = 0x1204 },
-+	{ .offset = 78, .value = 0x0303 },
-+	{ .offset = 79, .value = 0x0202 },
-+	{ .offset = 80, .value = 0xff02 },
-+	{ .offset = 87, .value = 0x0315 },
-+	{ .offset = 88, .value = 0x0315 },
-+	{ .offset = 96, .value = 0x2048 },
-+	{ .offset = 97, .value = 0xff11 },
-+	{ .offset = 98, .value = 0x1567 },
-+	{ .offset = 99, .value = 0xfb24 },
-+	{ .offset = 100, .value = 0x3e3c },
-+	{ .offset = 101, .value = 0x4038 },
-+	{ .offset = 102, .value = 0xfe7f },
-+	{ .offset = 103, .value = 0x1279 },
-+	{ .offset = 112, .value = 0x2048 },
-+	{ .offset = 113, .value = 0xff03 },
-+	{ .offset = 114, .value = 0x154c },
-+	{ .offset = 115, .value = 0xfb27 },
-+	{ .offset = 116, .value = 0x3e3c },
-+	{ .offset = 117, .value = 0x4038 },
-+	{ .offset = 118, .value = 0xfe87 },
-+	{ .offset = 119, .value = 0x1233 },
-+	{ .offset = 203, .value = 0x2226 },
-+};
-+
-+static struct board_info __initdata board_AR5387un = {
-+	.name = "96328A-1441N1",
-+	.expected_cpu_id = 0x6328,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43225,
-+		.pci_bus = 1,
-+		.pci_dev = 0,
-+		.board_fixups = ar5387un_fixups,
-+		.num_board_fixups = ARRAY_SIZE(ar5387un_fixups),
-+	},
-+};
-+
-+static struct board_info __initdata board_dsl_274xb_f1 = {
-+	.name = "AW4339U",
-+	.expected_cpu_id = 0x6328,
-+
-+	.has_pci = 1,
-+
-+	.has_caldata = 1,
-+	.caldata = {
-+		{
-+			.vendor = PCI_VENDOR_ID_ATHEROS,
-+			.caldata_offset = 0x7d1000,
-+			.slot = 0,
-+			.led_pin = -1,
-+			.led_active_high = 1,
-+		},
-+	},
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 4",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 3",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 2",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 1",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_FAST2704V2 = {
-+	.name = "F@ST2704V2",
-+	.expected_cpu_id = 0x6328,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.has_usbd = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_PDG_A4001N_A_000_1A1_AX = {
-+	.name = "96328avng",
-+	.expected_cpu_id = 0x6328,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43225,
-+		.pci_bus = 1,
-+		.pci_dev = 0,
-+	},
-+};
-+
-+static struct board_info __initdata board_PDG_A4101N_A_000_1A1_AE = {
-+	.name = "96328avngv",
-+	.expected_cpu_id = 0x6328,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43225,
-+		.pci_bus = 1,
-+		.pci_dev = 0,
-+	},
-+};
-+
-+static struct board_info __initdata board_R5010UNV2 = {
-+	.name = "96328ang",
-+	.expected_cpu_id = 0x6328,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43217,
-+		.pci_bus = 1,
-+		.pci_dev = 0,
-+	},
-+};
-+
-+static struct board_info __initdata board_TG582N = {
-+	.name = "DANT-1",
-+	.expected_cpu_id = 0x6328,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43225,
-+		.pci_bus = 1,
-+		.pci_dev = 0,
-+	},
-+};
-+
-+static struct board_info __initdata board_TG582N_TELECOM_ITALIA = {
-+	.name = "DANT-V",
-+	.expected_cpu_id = 0x6328,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43225,
-+		.pci_bus = 1,
-+		.pci_dev = 0,
-+	},
-+};
-+
-+static struct board_info __initdata board_W3400V6 = {
-+	.name = "96328ang",
-+	.expected_cpu_id = 0x6328,
-+
-+	.has_pci = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM4318,
-+		.pci_bus = 1,
-+		.pci_dev = 0,
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- 
- /*
-@@ -703,6 +1348,20 @@ static const struct board_info __initcon
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- 	&board_96328avng,
-+	&board_963281TAN,
-+	&board_A4001N,
-+	&board_A4001N1,
-+	&board_AD1018,
-+	&board_AR5381u,
-+	&board_AR5387un,
-+	&board_dsl_274xb_f1,
-+	&board_FAST2704V2,
-+	&board_PDG_A4001N_A_000_1A1_AX,
-+	&board_PDG_A4101N_A_000_1A1_AE,
-+	&board_TG582N,
-+	&board_TG582N_TELECOM_ITALIA,
-+	&board_R5010UNV2,
-+	&board_W3400V6,
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	&board_96338gw,
-@@ -742,7 +1401,23 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
-+	{ .compatible = "adb,a4001n", .data = &board_A4001N, },
-+	{ .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-+	{ .compatible = "adb,pdg-a4001n-a-000-1a1-ax", .data = &board_PDG_A4001N_A_000_1A1_AX, },
-+	{ .compatible = "adb,pdg-a4101n-a-000-1a1-ae", .data = &board_PDG_A4101N_A_000_1A1_AE, },
- 	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+	{ .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-+	{ .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
-+	{ .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
-+	{ .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
-+	{ .compatible = "d-link,dsl-2750u-c1", .data = &board_A4001N, },
-+	{ .compatible = "innacomm,w3400v6", .data = &board_W3400V6, },
-+	{ .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
-+	{ .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
-+	{ .compatible = "sercomm,ad1018", .data = &board_AD1018, },
-+	{ .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, },
-+	{ .compatible = "technicolor,tg582n", .data = &board_TG582N, },
-+	{ .compatible = "technicolor,tg582n-telecom-italia", .data = &board_TG582N_TELECOM_ITALIA, },
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	{ .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/bcm63xx/patches-5.4/513-board-bcm6338.patch b/target/linux/bcm63xx/patches-5.4/513-board-bcm6338.patch
deleted file mode 100644
index f3847c8140..0000000000
--- a/target/linux/bcm63xx/patches-5.4/513-board-bcm6338.patch
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1026,6 +1026,32 @@ static struct board_info __initdata boar
- 		.force_duplex_full	= 1,
- 	},
- };
-+
-+static struct board_info __initdata board_96338w2_e7t = {
-+	.name = "96338W2_E7T",
-+	.expected_cpu_id = 0x6338,
-+
-+	.has_enet0 = 1,
-+	.enet0 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_rta1320_16m = {
-+	.name = "RTA1320_16M",
-+	.expected_cpu_id = 0x6338,
-+
-+	.has_enet0 = 1,
-+	.enet0 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- 
- /*
-@@ -1366,6 +1392,8 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	&board_96338gw,
- 	&board_96338w,
-+	&board_96338w2_e7t,
-+	&board_rta1320_16m,
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	&board_96345gw2,
-@@ -1422,6 +1450,8 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	{ .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
- 	{ .compatible = "brcm,bcm96338w", .data = &board_96338w, },
-+	{ .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, },
-+	{ .compatible = "dynalink,rta1320", .data = &board_rta1320_16m, },
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	{ .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
diff --git a/target/linux/bcm63xx/patches-5.4/514-board_bcm6345.patch b/target/linux/bcm63xx/patches-5.4/514-board_bcm6345.patch
deleted file mode 100644
index 3f84c95385..0000000000
--- a/target/linux/bcm63xx/patches-5.4/514-board_bcm6345.patch
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1062,6 +1062,19 @@ static struct board_info __initdata boar
- 	.name				= "96345GW2",
- 	.expected_cpu_id		= 0x6345,
- };
-+
-+static struct board_info __initdata board_rta770w = {
-+	.name = "RTA770BW",
-+	.expected_cpu_id = 0x6345,
-+
-+	.has_enet0 = 1,
-+	.enet0 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6345 */
- 
- /*
-@@ -1397,6 +1410,7 @@ static const struct board_info __initcon
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	&board_96345gw2,
-+	&board_rta770w,
- #endif /* CONFIG_BCM63XX_CPU_6345 */
- #ifdef CONFIG_BCM63XX_CPU_6348
- 	&board_96348r,
-@@ -1455,6 +1469,8 @@ static struct of_device_id const bcm963x
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	{ .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
-+	{ .compatible = "dynalink,rta770bw", .data = &board_rta770w, },
-+	{ .compatible = "dynalink,rta770w", .data = &board_rta770w, },
- #endif /* CONFIG_BCM63XX_CPU_6345 */
- #ifdef CONFIG_BCM63XX_CPU_6348
- 	{ .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
diff --git a/target/linux/bcm63xx/patches-5.4/515-board-bcm6348.patch b/target/linux/bcm63xx/patches-5.4/515-board-bcm6348.patch
deleted file mode 100644
index 891184eedd..0000000000
--- a/target/linux/bcm63xx/patches-5.4/515-board-bcm6348.patch
+++ /dev/null
@@ -1,328 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1261,6 +1261,275 @@ static struct board_info __initdata boar
- 
- 	.has_ohci0 = 1,
- };
-+
-+static struct board_info __initdata board_96348A_122 = {
-+	.name = "96348A-122",
-+	.expected_cpu_id = 0x6348,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM4318,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_96348_D4PW = {
-+	.name = "D-4P-W",
-+	.expected_cpu_id = 0x6348,
-+
-+	.has_pci = 1,
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_96348gw_10_AR1004G = {
-+	.name = "AR1004G",
-+	.expected_cpu_id = 0x6348,
-+
-+	.has_pci = 1,
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_96348sv = {
-+	.name = "MAGIC",
-+	.expected_cpu_id = 0x6348,
-+
-+	.has_pccard = 1,
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+
-+	.has_enet0 = 1,
-+	.enet0 = {
-+		.has_phy = 1,
-+		.use_internal_phy = 1,
-+	},
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		/* it has BP_ENET_EXTERNAL_PHY */
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
-+/* NetGear DG834G v4 */
-+static struct board_info __initdata board_96348W3 = {
-+ 	.name = "96348W3",
-+	.expected_cpu_id = 0x6348,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_CPVA502plus = {
-+	.name = "CPVA502+",
-+	.expected_cpu_id = 0x6348,
-+
-+	.has_pci = 1,
-+	.ephy_reset_gpio = 4,
-+	.ephy_reset_gpio_flags = GPIO_ACTIVE_LOW,
-+
-+	.has_enet0 = 1,
-+	.enet0 = {
-+		.has_phy = 1,
-+		.use_internal_phy = 1,
-+	},
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM4318,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_ct536_ct5621 = {
-+	.name = "CT536_CT5621",
-+	.expected_cpu_id = 0x6348,
-+
-+	.has_pccard = 1,
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM4318,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_FAST2604 = {
-+	.name = "F@ST2604",
-+	.expected_cpu_id = 0x6348,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_gw6000 = {
-+	.name = "GW6000",
-+	.expected_cpu_id = 0x6348,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+
-+	.has_enet0 = 1,
-+	.enet0 = {
-+		.has_phy = 1,
-+		.use_internal_phy = 1,
-+	},
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_gw6200 = {
-+	.name = "GW6200",
-+	.expected_cpu_id = 0x6348,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+
-+	.has_enet0 = 1,
-+	.enet0 = {
-+		.has_phy = 1,
-+		.use_internal_phy = 1,
-+	},
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
-+static struct sprom_fixup __initdata spw500v_fixups[] = {
-+	{ .offset = 46, .value = 0x3046 },
-+	{ .offset = 47, .value = 0x15a7 },
-+	{ .offset = 48, .value = 0xfa89 },
-+	{ .offset = 49, .value = 0xfe79 },
-+	{ .offset = 57, .value = 0x6a49 },
-+};
-+
-+static struct board_info __initdata board_spw500v = {
-+	.name = "SPW500V",
-+	.expected_cpu_id = 0x6348,
-+
-+	.has_pci = 1,
-+
-+	.has_enet0 = 1,
-+	.enet0 = {
-+		.has_phy = 1,
-+		.use_internal_phy = 1,
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM4318,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+		.board_fixups = spw500v_fixups,
-+		.num_board_fixups = ARRAY_SIZE(spw500v_fixups),
-+	},
-+};
-+
-+/* BT Voyager 2110 */
-+static struct board_info __initdata board_V2110 = {
-+	.name = "V2110",
-+	.expected_cpu_id = 0x6348,
-+
-+	.has_pci = 1,
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_V2500V_BB = {
-+	.name = "V2500V_BB",
-+	.expected_cpu_id = 0x6348,
-+
-+	.has_pci = 1,
-+
-+	.has_enet0 = 1,
-+	.enet0 = {
-+		.has_phy = 1,
-+		.use_internal_phy = 1,
-+	},
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- 
- /*
-@@ -1421,6 +1690,19 @@ static const struct board_info __initcon
- 	&board_DV201AMR,
- 	&board_96348gw_a,
- 	&board_rta1025w_16,
-+	&board_96348A_122,
-+	&board_96348_D4PW,
-+	&board_96348gw_10_AR1004G,
-+	&board_96348sv,
-+	&board_96348W3,
-+	&board_CPVA502plus,
-+	&board_ct536_ct5621,
-+	&board_FAST2604,
-+	&board_gw6000,
-+	&board_gw6200,
-+	&board_spw500v,
-+	&board_V2110,
-+	&board_V2500V_BB,
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- #ifdef CONFIG_BCM63XX_CPU_6358
- 	&board_96358vw,
-@@ -1473,15 +1755,29 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "dynalink,rta770w", .data = &board_rta770w, },
- #endif /* CONFIG_BCM63XX_CPU_6345 */
- #ifdef CONFIG_BCM63XX_CPU_6348
-+	{ .compatible = "asmax,ar-1004g", .data = &board_96348gw_10_AR1004G, },
- 	{ .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
- 	{ .compatible = "brcm,bcm96348r", .data = &board_96348r, },
- 	{ .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
- 	{ .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
- 	{ .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+	{ .compatible = "bt,voyager-2110", .data = &board_V2110, },
-+	{ .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
-+	{ .compatible = "comtrend,ct-5365", .data = &board_96348A_122, },
-+	{ .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, },
-+	{ .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
-+	{ .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
- 	{ .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
- 	{ .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
- 	{ .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-+ 	{ .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
- 	{ .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-+ 	{ .compatible = "sagem,fast-2604", .data = &board_FAST2604, },
-+	{ .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-+	{ .compatible = "tecom,gw6000", .data = &board_gw6000, },
-+	{ .compatible = "tecom,gw6200", .data = &board_gw6200, },
-+	{ .compatible = "telsey,cpva502plus", .data = &board_CPVA502plus, },
-+	{ .compatible = "telsey,magic", .data = &board_96348sv, },
- 	{ .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
- 	{ .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
- #endif /* CONFIG_BCM63XX_CPU_6348 */
diff --git a/target/linux/bcm63xx/patches-5.4/516-board-bcm6358.patch b/target/linux/bcm63xx/patches-5.4/516-board-bcm6358.patch
deleted file mode 100644
index c1a4e9bbd5..0000000000
--- a/target/linux/bcm63xx/patches-5.4/516-board-bcm6358.patch
+++ /dev/null
@@ -1,384 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -12,6 +12,7 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
-+#include <linux/pci_ids.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -1614,6 +1615,88 @@ static struct board_info __initdata boar
- 	.has_ehci0 = 1,
- };
- 
-+static struct board_info __initdata board_CPVA642 = {
-+	.name = "CPVA642",
-+	.expected_cpu_id = 0x6358,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+ 	},
-+};
-+
-+static struct board_info __initdata board_ct6373_1 = {
-+	.name = "CT6373-1",
-+	.expected_cpu_id = 0x6358,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM4318,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+	},
-+};
-+
-+/* D-Link DSL-274xB revison C2/C3 */
-+static struct board_info __initdata board_dsl_274xb_rev_c = {
-+	.name = "AW4139",
-+	.expected_cpu_id = 0x6358,
-+
-+	.has_pci = 1,
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
-+/* D-Link DVA-G3810BN/TL */
-+static struct board_info __initdata board_DVAG3810BN = {
-+	.name = "DVAG3810BN",
-+	.expected_cpu_id = 0x6358,
-+
-+	.has_pccard = 1,
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_enet0 = 1,
-+	.enet0 = {
-+		.has_phy = 1,
-+		.use_internal_phy = 1,
-+	},
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
- static struct board_info __initdata board_DWVS0 = {
- 	.name				= "DWV-S0",
- 	.expected_cpu_id		= 0x6358,
-@@ -1638,6 +1721,238 @@ static struct board_info __initdata boar
- 	.has_ohci0			= 1,
- 	.has_ehci0			= 1,
- };
-+
-+static struct board_info __initdata board_homehub2a = {
-+	.name = "HOMEHUB2A",
-+	.expected_cpu_id = 0x6358,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM4322,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_HW520 = {
-+	.name = "HW6358GW_B",
-+	.expected_cpu_id = 0x6358,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_enet0 = 1,
-+	.enet0 = {
-+		.has_phy = 1,
-+		.use_internal_phy = 1,
-+	},
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM4318,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_HW553 = {
-+	.name = "HW553",
-+	.expected_cpu_id = 0x6358,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM4318,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_HW556_A = {
-+	.name = "HW556_A",
-+	.expected_cpu_id = 0x6358,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_caldata = 1,
-+	.caldata = {
-+		{
-+			.vendor = PCI_VENDOR_ID_ATHEROS,
-+			.caldata_offset = 0xf7e000,
-+			.slot = 1,
-+			.endian_check = 1,
-+			.led_pin = 2,
-+			.led_active_high = 1,
-+		},
-+	},
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_HW556_B = {
-+	.name = "HW556_B",
-+	.expected_cpu_id = 0x6358,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_caldata = 1,
-+	.caldata = {
-+		{
-+			.vendor = PCI_VENDOR_ID_ATHEROS,
-+			.caldata_offset = 0xefe000,
-+			.slot = 1,
-+			.endian_check = 1,
-+			.led_pin = 2,
-+			.led_active_high = 1,
-+		},
-+	},
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_HW556_C = {
-+	.name = "HW556_C",
-+	.expected_cpu_id = 0x6358,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_caldata = 1,
-+	.caldata = {
-+		{
-+			.vendor = PCI_VENDOR_ID_RALINK,
-+			.caldata_offset = 0xeffe00,
-+			.slot = 1,
-+			.eeprom = "rt2x00.eeprom",
-+		},
-+	},
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r0 = {
-+	.name = "NB4-SER-r0",
-+	.expected_cpu_id = 0x6358,
-+
-+	.has_pccard = 1,
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_enet0 = 1,
-+	.enet0 = {
-+		.has_phy = 1,
-+		.use_internal_phy = 1,
-+	},
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r1 = {
-+	.name = "NB4-FXC-r1",
-+	.expected_cpu_id = 0x6358,
-+
-+	.has_pccard = 1,
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_enet0 = 1,
-+	.enet0 = {
-+		.has_phy = 1,
-+		.use_internal_phy = 1,
-+	},
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 0,
-+		.force_speed_100 = 1,
-+		.force_duplex_full = 1,
-+	},
-+};
-+
-+ /* T-Home Speedport W 303V Typ B */
-+static struct board_info __initdata board_spw303v = {
-+	.name = "96358-502V",
-+	.expected_cpu_id = 0x6358,
-+
-+	.has_pci = 1,
-+
-+	.has_enet0 = 1,
-+	.enet0 = {
-+		.has_phy = 1,
-+		.use_internal_phy = 1,
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- 
- /*
-@@ -1708,7 +2023,20 @@ static const struct board_info __initcon
- 	&board_96358vw,
- 	&board_96358vw2,
- 	&board_AGPFS0,
-+	&board_CPVA642,
-+	&board_ct6373_1,
-+	&board_dsl_274xb_rev_c,
-+	&board_DVAG3810BN,
- 	&board_DWVS0,
-+	&board_homehub2a,
-+	&board_HW520,
-+	&board_HW553,
-+	&board_HW556_A,
-+	&board_HW556_B,
-+	&board_HW556_C,
-+	&board_nb4_ser_r0,
-+	&board_nb4_fxc_r1,
-+	&board_spw303v,
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- };
- 
-@@ -1785,11 +2113,24 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
- 	{ .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
- 	{ .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+	{ .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, },
-+	{ .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
- 	{ .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+	{ .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-+	{ .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
-+	{ .compatible = "huawei,echolife-hg520v", .data = &board_HW520, },
-+	{ .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
-+	{ .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, },
-+	{ .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, },
-+	{ .compatible = "huawei,echolife-hg556a-c", .data = &board_HW556_C, },
- 	{ .compatible = "pirelli,a226g", .data = &board_DWVS0, },
- 	{ .compatible = "pirelli,a226m", .data = &board_DWVS0, },
- 	{ .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
- 	{ .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-+	{ .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
-+	{ .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
-+	{ .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
-+	{ .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- #ifdef CONFIG_BCM63XX_CPU_6362
- #endif /* CONFIG_BCM63XX_CPU_6362 */
diff --git a/target/linux/bcm63xx/patches-5.4/517-board_bcm6362.patch b/target/linux/bcm63xx/patches-5.4/517-board_bcm6362.patch
deleted file mode 100644
index 71a84937a2..0000000000
--- a/target/linux/bcm63xx/patches-5.4/517-board_bcm6362.patch
+++ /dev/null
@@ -1,144 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1955,6 +1955,117 @@ static struct board_info __initdata boar
- };
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- 
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+static struct board_info __initdata board_dgnd3700v2 = {
-+	.name = "96362ADVN2xh",
-+	.expected_cpu_id = 0x6362,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[4] = {
-+				.used = 1,
-+				.phy_id = 0xff,
-+				.bypass_link = 1,
-+				.force_speed = 1000,
-+				.force_duplex_full = 1,
-+				.name = "RGMII",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_fast2504n = {
-+	.name = "F@ST2504n",
-+	.expected_cpu_id = 0x6362,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_hg253s_v2 = {
-+	.name = "hg253s",
-+	.expected_cpu_id = 0x6362,
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[4] = {
-+				.used = 1,
-+				.phy_id = 0xff,
-+				.bypass_link = 1,
-+				.force_speed = 1000,
-+				.force_duplex_full = 1,
-+				.timing_sel = 1,
-+				.name = "RGMII",
-+			},
-+
-+			[5] = {
-+				.used = 1,
-+				.phy_id = 24,
-+				.timing_sel = 1,
-+				.name = "WAN",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_nb6 = {
-+	.name = "NB6",
-+	.expected_cpu_id = 0x6362,
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[4] = {
-+				.used = 1,
-+				.phy_id = 0xff,
-+				.bypass_link = 1,
-+				.force_speed = 1000,
-+				.force_duplex_full = 1,
-+				.name = "RGMII",
-+			},
-+		},
-+	},
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6362 */
-+
- /*
-  * all boards
-  */
-@@ -2038,6 +2149,12 @@ static const struct board_info __initcon
- 	&board_nb4_fxc_r1,
- 	&board_spw303v,
- #endif /* CONFIG_BCM63XX_CPU_6358 */
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+	&board_dgnd3700v2,
-+	&board_fast2504n,
-+	&board_hg253s_v2,
-+	&board_nb6,
-+#endif /* CONFIG_BCM63XX_CPU_6362 */
- };
- 
- static struct of_device_id const bcm963xx_boards_dt[] = {
-@@ -2133,6 +2250,10 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- #ifdef CONFIG_BCM63XX_CPU_6362
-+	{ .compatible = "huawei,hg253s-v2", .data = &board_hg253s_v2, },
-+	{ .compatible = "netgear,dgnd3700-v2", .data = &board_dgnd3700v2, },
-+	{ .compatible = "sagem,fast-2504n", .data = &board_fast2504n, },
-+	{ .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- #ifdef CONFIG_BCM63XX_CPU_6368
- #endif /* CONFIG_BCM63XX_CPU_6368 */
diff --git a/target/linux/bcm63xx/patches-5.4/518-board_bcm6368.patch b/target/linux/bcm63xx/patches-5.4/518-board_bcm6368.patch
deleted file mode 100644
index e200535217..0000000000
--- a/target/linux/bcm63xx/patches-5.4/518-board_bcm6368.patch
+++ /dev/null
@@ -1,732 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -13,6 +13,8 @@
- #include <linux/kernel.h>
- #include <linux/string.h>
- #include <linux/pci_ids.h>
-+#include <linux/platform_data/b53.h>
-+#include <linux/spi/spi.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -2067,6 +2069,648 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- 
- /*
-+ * known 6368 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+static struct board_info __initdata board_96368mvngr = {
-+	.name = "96368MVNgr",
-+	.expected_cpu_id = 0x6368,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "port1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "port2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "port3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "port4",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_96368mvwg = {
-+	.name = "96368MVWG",
-+	.expected_cpu_id = 0x6368,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_usbd = 1,
-+	.usbd = {
-+		.use_fullspeed = 0,
-+		.port_no = 0,
-+	},
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "port1",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "port2",
-+			},
-+			[4] = {
-+				.used = 1,
-+				.phy_id = 0x12,
-+				.name = "port0",
-+			},
-+			[5] = {
-+				.used = 1,
-+				.phy_id = 0x11,
-+				.name = "port3",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_AV4202N = {
-+	.name = "96368_Swiss_S1",
-+	.expected_cpu_id = 0x6368,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "port1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "port2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "port3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "port4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM4322,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_DGND3700v1_3800B = {
-+	.name = "U12L144T01",
-+	.expected_cpu_id = 0x6368,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[5] = {
-+				.used = 1,
-+				.phy_id = 0xff,
-+				.bypass_link = 1,
-+				.force_speed = 1000,
-+				.force_duplex_full = 1,
-+				.name = "RGMII",
-+			},
-+		},
-+	},
-+};
-+
-+static struct sprom_fixup __initdata EVG2000_fixups[] = {
-+  { .offset = 219, .value = 0xec08 },
-+};
-+
-+static struct board_info __initdata board_EVG2000 = {
-+	.name = "96369PVG",
-+	.expected_cpu_id = 0x6368,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[5] = {
-+				.used = 1,
-+				.phy_id = 0xff,
-+				.bypass_link = 1,
-+				.force_speed = 1000,
-+				.force_duplex_full = 1,
-+				.name = "RGMII",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM4322,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+		.board_fixups = EVG2000_fixups,
-+		.num_board_fixups = ARRAY_SIZE(EVG2000_fixups),
-+	},
-+};
-+
-+static struct board_info __initdata board_HG622 = {
-+	.name = "96368MVWG_hg622",
-+	.expected_cpu_id = 0x6368,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_caldata = 1,
-+	.caldata = {
-+		{
-+			.vendor = PCI_VENDOR_ID_RALINK,
-+			.caldata_offset = 0xfa0000,
-+			.slot = 1,
-+			.eeprom = "rt2x00.eeprom",
-+		},
-+	},
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "port1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "port2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "port3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "port4",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_HG655b = {
-+	.name = "HW65x",
-+	.expected_cpu_id = 0x6368,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_caldata = 1,
-+	.caldata = {
-+		{
-+			.vendor = PCI_VENDOR_ID_RALINK,
-+			.caldata_offset = 0x7c0000,
-+			.slot = 1,
-+			.eeprom = "rt2x00.eeprom",
-+		},
-+	},
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "port1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "port2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "port3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "port4",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_P870HW51A_V2 = {
-+	.name = "P870HW-51a_v2",
-+	.expected_cpu_id = 0x6368,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "port1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "port2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "port3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "port4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM4318,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+	},
-+};
-+
-+static struct board_info __initdata board_R1000H = {
-+	.name = "R1000H",
-+	.expected_cpu_id = 0x6368,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[5] = {
-+				.used = 1,
-+				.phy_id = 0xff,
-+				.bypass_link = 1,
-+				.force_speed = 1000,
-+				.force_duplex_full = 1,
-+				.name = "RGMII",
-+			},
-+		},
-+	},
-+};
-+
-+static struct sprom_fixup __initdata vh4032n_fixups[] = {
-+	{ .offset = 2, .value = 0x04d2 },
-+	{ .offset = 4, .value = 0x4350 },
-+	{ .offset = 65, .value = 0x1300 },
-+	{ .offset = 68, .value = 0x0402 },
-+	{ .offset = 70, .value = 0x0090 },
-+	{ .offset = 71, .value = 0x4c19 },
-+	{ .offset = 72, .value = 0x2345 },
-+	{ .offset = 87, .value = 0x0315 },
-+	{ .offset = 88, .value = 0x0315 },
-+	{ .offset = 96, .value = 0x2048 },
-+	{ .offset = 97, .value = 0xfed7 },
-+	{ .offset = 98, .value = 0x15a6 },
-+	{ .offset = 99, .value = 0xfaee },
-+	{ .offset = 100, .value = 0x3e3a },
-+	{ .offset = 101, .value = 0x3a36 },
-+	{ .offset = 102, .value = 0xff7f },
-+	{ .offset = 103, .value = 0x11b9 },
-+	{ .offset = 104, .value = 0xfc53 },
-+	{ .offset = 105, .value = 0xffe6 },
-+	{ .offset = 106, .value = 0xfdd2 },
-+	{ .offset = 107, .value = 0xfe49 },
-+	{ .offset = 108, .value = 0xff6a },
-+	{ .offset = 109, .value = 0x136e },
-+	{ .offset = 110, .value = 0xfbed },
-+	{ .offset = 111, .value = 0x0000 },
-+	{ .offset = 112, .value = 0x2048 },
-+	{ .offset = 113, .value = 0xfee2 },
-+	{ .offset = 114, .value = 0x15e5 },
-+	{ .offset = 115, .value = 0xfaed },
-+	{ .offset = 116, .value = 0x3e3a },
-+	{ .offset = 117, .value = 0x3a36 },
-+	{ .offset = 118, .value = 0xffc8 },
-+	{ .offset = 119, .value = 0x12b8 },
-+	{ .offset = 120, .value = 0xfca1 },
-+	{ .offset = 121, .value = 0xff9b },
-+	{ .offset = 122, .value = 0x122a },
-+	{ .offset = 123, .value = 0xfcc8 },
-+	{ .offset = 124, .value = 0xff95 },
-+	{ .offset = 125, .value = 0x146b },
-+	{ .offset = 126, .value = 0xfbba },
-+	{ .offset = 127, .value = 0x0000 },
-+	{ .offset = 161, .value = 0x0000 },
-+	{ .offset = 162, .value = 0x0000 },
-+	{ .offset = 169, .value = 0x0000 },
-+	{ .offset = 170, .value = 0x0000 },
-+	{ .offset = 171, .value = 0x0000 },
-+	{ .offset = 172, .value = 0x0000 },
-+	{ .offset = 173, .value = 0x0000 },
-+	{ .offset = 174, .value = 0x0000 },
-+	{ .offset = 175, .value = 0x0000 },
-+	{ .offset = 176, .value = 0x0000 },
-+	{ .offset = 219, .value = 0x1108 },
-+};
-+
-+static struct board_info __initdata board_VH4032N = {
-+	.name = "VH4032N",
-+	.expected_cpu_id = 0x6368,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "LAN4",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "LAN3",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "LAN2",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "LAN1",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43222,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+		.board_fixups = vh4032n_fixups,
-+		.num_board_fixups = ARRAY_SIZE(vh4032n_fixups),
-+	},
-+};
-+
-+static struct sprom_fixup __initdata vr3025u_fixups[] = {
-+	{ .offset = 97, .value = 0xfeb3 },
-+	{ .offset = 98, .value = 0x1618 },
-+	{ .offset = 99, .value = 0xfab0 },
-+	{ .offset = 113, .value = 0xfed1 },
-+	{ .offset = 114, .value = 0x1609 },
-+	{ .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3025u = {
-+	.name = "96368M-1541N",
-+	.expected_cpu_id = 0x6368,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "port1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "port2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "port3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "port4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43222,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+		.board_fixups = vr3025u_fixups,
-+		.num_board_fixups = ARRAY_SIZE(vr3025u_fixups),
-+	},
-+};
-+
-+static struct sprom_fixup __initdata vr3025un_fixups[] = {
-+	{ .offset = 97, .value = 0xfeb3 },
-+	{ .offset = 98, .value = 0x1618 },
-+	{ .offset = 99, .value = 0xfab0 },
-+	{ .offset = 113, .value = 0xfed1 },
-+	{ .offset = 114, .value = 0x1609 },
-+	{ .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3025un = {
-+	.name = "96368M-1341N",
-+	.expected_cpu_id = 0x6368,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "port1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "port2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "port3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "port4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43222,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+		.board_fixups = vr3025un_fixups,
-+		.num_board_fixups = ARRAY_SIZE(vr3025un_fixups),
-+	},
-+};
-+
-+static struct sprom_fixup __initdata vr3026e_fixups[] = {
-+	{ .offset = 97, .value = 0xfeb3 },
-+	{ .offset = 98, .value = 0x1618 },
-+	{ .offset = 99, .value = 0xfab0 },
-+	{ .offset = 113, .value = 0xfed1 },
-+	{ .offset = 114, .value = 0x1609 },
-+	{ .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3026e = {
-+	.name = "96368MT-1341N1",
-+	.expected_cpu_id = 0x6368,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "port1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "port2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "port3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "port4",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43222,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+		.board_fixups = vr3026e_fixups,
-+		.num_board_fixups = ARRAY_SIZE(vr3026e_fixups),
-+	},
-+};
-+
-+static struct sprom_fixup __initdata wap5813n_fixups[] = {
-+	{ .offset = 97, .value = 0xfeed },
-+	{ .offset = 98, .value = 0x15d1 },
-+	{ .offset = 99, .value = 0xfb0d },
-+	{ .offset = 113, .value = 0xfef7 },
-+	{ .offset = 114, .value = 0x15f7 },
-+	{ .offset = 115, .value = 0xfb1a },
-+};
-+
-+static struct board_info __initdata board_WAP5813n = {
-+	.name = "96369R-1231N",
-+	.expected_cpu_id = 0x6368,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[4] = {
-+				.used = 1,
-+				.phy_id = 0xff,
-+				.bypass_link = 1,
-+				.force_speed = 1000,
-+				.force_duplex_full = 1,
-+				.name = "RGMII",
-+			},
-+		},
-+	},
-+
-+	.use_fallback_sprom = 1,
-+	.fallback_sprom = {
-+		.type = SPROM_BCM43222,
-+		.pci_bus = 0,
-+		.pci_dev = 1,
-+		.board_fixups = wap5813n_fixups,
-+		.num_board_fixups = ARRAY_SIZE(wap5813n_fixups),
-+	},
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6368 */
-+
-+/*
-  * all boards
-  */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -2155,6 +2799,22 @@ static const struct board_info __initcon
- 	&board_hg253s_v2,
- 	&board_nb6,
- #endif /* CONFIG_BCM63XX_CPU_6362 */
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+	&board_96368mvngr,
-+	&board_96368mvwg,
-+	&board_AV4202N,
-+	&board_DGND3700v1_3800B,
-+	&board_EVG2000,
-+	&board_HG622,
-+	&board_HG655b,
-+	&board_P870HW51A_V2,
-+	&board_R1000H,
-+	&board_VH4032N,
-+	&board_VR3025u,
-+	&board_VR3025un,
-+	&board_VR3026e,
-+	&board_WAP5813n,
-+#endif /* CONFIG_BCM63XX_CPU_6368 */
- };
- 
- static struct of_device_id const bcm963xx_boards_dt[] = {
-@@ -2256,6 +2916,20 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- #ifdef CONFIG_BCM63XX_CPU_6368
-+	{ .compatible = "actiontec,r1000h", .data = &board_R1000H, },
-+	{ .compatible = "adb,av4202n", .data = &board_AV4202N, },
-+	{ .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-+	{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-+	{ .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-+	{ .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-+	{ .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
-+	{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+	{ .compatible = "huawei,echolife-hg622", .data = &board_HG622, },
-+	{ .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-+	{ .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-+	{ .compatible = "netgear,evg2000", .data = &board_EVG2000, },
-+	{ .compatible = "observa,vh4032n", .data = &board_VH4032N, },
-+	{ .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
- #endif /* CONFIG_BCM63XX_CPU_63268 */
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -81,12 +81,25 @@ void __init board_early_setup(const stru
- 		bcm63xx_pci_enabled = 1;
- 		if (BCMCPU_IS_6348())
- 			val |= GPIO_MODE_6348_G2_PCI;
-+
-+		if (BCMCPU_IS_6368())
-+			val |= GPIO_MODE_6368_PCI_REQ1 |
-+				GPIO_MODE_6368_PCI_GNT1 |
-+				GPIO_MODE_6368_PCI_INTB |
-+				GPIO_MODE_6368_PCI_REQ0 |
-+				GPIO_MODE_6368_PCI_GNT0;
- 	}
- #endif
- 
- 	if (board.has_pccard) {
- 		if (BCMCPU_IS_6348())
- 			val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+
-+		if (BCMCPU_IS_6368())
-+			val |= GPIO_MODE_6368_PCMCIA_CD1 |
-+				GPIO_MODE_6368_PCMCIA_CD2 |
-+				GPIO_MODE_6368_PCMCIA_VS1 |
-+				GPIO_MODE_6368_PCMCIA_VS2;
- 	}
- 
- 	if (board.has_enet0 && !board.enet0.use_internal_phy) {
diff --git a/target/linux/bcm63xx/patches-5.4/519-board_bcm63268.patch b/target/linux/bcm63xx/patches-5.4/519-board_bcm63268.patch
deleted file mode 100644
index f46cbbedc7..0000000000
--- a/target/linux/bcm63xx/patches-5.4/519-board_bcm63268.patch
+++ /dev/null
@@ -1,307 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2711,6 +2711,273 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- 
- /*
-+ * known 63268/63269 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+static struct board_info __initdata board_963268bu_p300 = {
-+	.name = "963268BU_P300",
-+	.expected_cpu_id = 0x63268,
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_usbd = 1,
-+	.usbd = {
-+		.use_fullspeed = 0,
-+		.port_no = 0,
-+	},
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 17,
-+				.name = "FE1",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "GbE2",
-+			},
-+			[4] = {
-+				.used = 1,
-+				.phy_id = 0,
-+				.name = "GbE3",
-+				.mii_override = 1,
-+				.timing_sel = 1,
-+			},
-+			[5] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "GbE1",
-+				.mii_override = 1,
-+				.timing_sel = 1,
-+			},
-+			[6] = {
-+				.used = 1,
-+				.phy_id = 24,
-+				.name = "GbE4",
-+				.mii_override = 1,
-+				.timing_sel = 1,
-+			},
-+			[7] = {
-+				.used = 1,
-+				.phy_id = 25,
-+				.name = "GbE5",
-+				.mii_override = 1,
-+				.timing_sel = 1,
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_963269bhr = {
-+	.name = "963269BHR",
-+	.expected_cpu_id = 0x63268,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "port1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "port2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "port3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "port4",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_BSKYB_63168 = {
-+	.name = "BSKYB_63168",
-+	.expected_cpu_id = 0x63268,
-+
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "Port 1",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "Port 2",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "Port 3",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "Port 4",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_H500s = {
-+	.name = "BXK00C-1.6",
-+	.expected_cpu_id = 0x63268,
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 12,
-+				.name = "WAN",
-+			},
-+			[4] = {
-+				.used = 1,
-+				.phy_id = 0,
-+				.bypass_link = 1,
-+				.force_speed = 1000,
-+				.force_duplex_full = 1,
-+				.mii_override = 1,
-+				.timing_sel = 1,
-+				.name = "RGMII",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_VG8050 = {
-+	.name = "963169P-1861N5",
-+	.expected_cpu_id = 0x63268,
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 2,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[6] = {
-+				.used = 1,
-+				.phy_id = 0xff,
-+				.bypass_link = 1,
-+				.force_speed = 1000,
-+				.force_duplex_full = 1,
-+				.mii_override = 1,
-+				.timing_sel = 1,
-+				.name = "RGMII",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_VR3032u = {
-+	.name = "963168M-1841N1",
-+	.expected_cpu_id = 0x63268,
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "LAN2",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "LAN3",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "LAN4",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "LAN1",
-+			},
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_vw6339gu = {
-+	.name = "VW6339GU",
-+	.expected_cpu_id = 0x63268,
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports = 1,
-+
-+	.has_enetsw = 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used = 1,
-+				.phy_id = 1,
-+				.name = "LAN2",
-+			},
-+			[1] = {
-+				.used = 1,
-+				.phy_id = 2,
-+				.name = "LAN3",
-+			},
-+			[2] = {
-+				.used = 1,
-+				.phy_id = 3,
-+				.name = "LAN4",
-+			},
-+			[3] = {
-+				.used = 1,
-+				.phy_id = 4,
-+				.name = "LAN1",
-+			},
-+			[4] = {
-+				.used = 1,
-+				.phy_id = 7,
-+				.name = "WAN",
-+				.mii_override = 1,
-+				.timing_sel = 1,
-+			},
-+		},
-+	},
-+};
-+#endif /* CONFIG_BCM63XX_CPU_63268 */
-+
-+/*
-  * all boards
-  */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -2815,6 +3082,15 @@ static const struct board_info __initcon
- 	&board_VR3026e,
- 	&board_WAP5813n,
- #endif /* CONFIG_BCM63XX_CPU_6368 */
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+	&board_963268bu_p300,
-+	&board_963269bhr,
-+	&board_BSKYB_63168,
-+	&board_H500s,
-+	&board_VG8050,
-+	&board_VR3032u,
-+	&board_vw6339gu,
-+#endif /* CONFIG_BCM63XX_CPU_63268 */
- };
- 
- static struct of_device_id const bcm963xx_boards_dt[] = {
-@@ -2932,6 +3208,14 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
-+	{ .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
-+	{ .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
-+	{ .compatible = "comtrend,vg-8050", .data = &board_VG8050, },
-+	{ .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, },
-+	{ .compatible = "inteno,vg50", .data = &board_vw6339gu, },
-+	{ .compatible = "sercomm,h500-s-lowi", .data = &board_H500s, },
-+	{ .compatible = "sercomm,h500-s-vfes", .data = &board_H500s, },
-+	{ .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
- #endif /* CONFIG_BCM63XX_CPU_63268 */
- #endif /* CONFIG_OF */
- 	{ },
diff --git a/target/linux/bcm63xx/patches-5.4/531-board_bcm6348-bt-voyager-2500v-bb.patch b/target/linux/bcm63xx/patches-5.4/531-board_bcm6348-bt-voyager-2500v-bb.patch
deleted file mode 100644
index ec49e933d6..0000000000
--- a/target/linux/bcm63xx/patches-5.4/531-board_bcm6348-bt-voyager-2500v-bb.patch
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -3244,6 +3244,22 @@ void __init board_bcm963xx_init(void)
- 		val &= MPI_CSBASE_BASE_MASK;
- 	}
- 	boot_addr = (u8 *)KSEG1ADDR(val);
-+	pr_info("Boot address 0x%08x\n",(unsigned int)boot_addr);
-+
-+	/* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
-+	/* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
-+	/* Loading firmware from the CFE Prompt always loads to Bank 0 */
-+	/* Do an early check of CFE and then select bank 0 */
-+
-+	if (boot_addr == (u8 *)0xbf800000) {
-+		u8 *tmp_boot_addr = (u8*)0xbfc00000;
-+
-+		bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET);
-+		if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) {
-+			pr_info("V2500V: nvram bank 0\n");
-+			boot_addr = tmp_boot_addr;
-+		}
-+	}
- 
- 	/* dump cfe version */
- 	cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -21,6 +21,7 @@
- #include <linux/spi/spi.h>
- #include <linux/spi/flash.h>
- 
-+#include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
- #include <bcm63xx_regs.h>
-@@ -256,6 +257,13 @@ int __init bcm63xx_flash_register(void)
- 			val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- 			val &= MPI_CSBASE_BASE_MASK;
- 
-+			/* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
-+			/* Loading from CFE always uses Bank 0 */
-+			if (!strcmp(board_get_name(), "V2500V_BB")) {
-+				pr_info("V2500V: Start in Bank 0\n");
-+				val = val + 0x400000; // Select Bank 0 start address
-+			}
-+
- 			mtd_resources[0].start = val;
- 			mtd_resources[0].end = 0x1FFFFFFF;
- 		}
diff --git a/target/linux/bcm63xx/patches-5.4/532-MIPS-BCM63XX-add-inventel-Livebox-support.patch b/target/linux/bcm63xx/patches-5.4/532-MIPS-BCM63XX-add-inventel-Livebox-support.patch
deleted file mode 100644
index 24b8f68807..0000000000
--- a/target/linux/bcm63xx/patches-5.4/532-MIPS-BCM63XX-add-inventel-Livebox-support.patch
+++ /dev/null
@@ -1,219 +0,0 @@
-From e796582b499f0ba6acaa1ac3a10c09cceaab7702 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:55:52 +0100
-Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support
-
----
- arch/mips/bcm63xx/boards/Kconfig         |    6 +
- arch/mips/bcm63xx/boards/Makefile        |    1 +
- arch/mips/bcm63xx/boards/board_common.c  |    2 +-
- arch/mips/bcm63xx/boards/board_common.h  |    6 +
- arch/mips/bcm63xx/boards/board_livebox.c |  215 ++++++++++++++++++++++++++++++
- 5 files changed, 229 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/boards/board_livebox.c
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -12,4 +12,10 @@ config BOARD_BCM963XX
- 	select BCMA
- 	default y
- 
-+config BOARD_LIVEBOX
-+	bool "Inventel Livebox(es) boards"
-+	select SSB
-+	help
-+	  Inventel Livebox boards using the RedBoot bootloader.
-+
- endmenu
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1,3 +1,4 @@
- # SPDX-License-Identifier: GPL-2.0-only
- obj-y					+= board_common.o
- obj-$(CONFIG_BOARD_BCM963XX)		+= board_bcm963xx.o
-+obj-$(CONFIG_BOARD_LIVEBOX)		+= board_livebox.o
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -54,7 +54,7 @@ void __init board_prom_init(void)
- 	if (fw_arg3 == CFE_EPTSEAL)
- 		board_bcm963xx_init();
- 	else
--		panic("unsupported bootloader detected");
-+		board_livebox_init();
- }
- 
- static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -24,4 +24,10 @@ static inline void board_of_device_prese
- }
- #endif
- 
-+#if defined(CONFIG_BOARD_LIVEBOX)
-+void board_livebox_init(void);
-+#else
-+static inline void board_livebox_init(void) { }
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,158 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/input.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <board_bcm963xx.h>
-+
-+#include "board_common.h"
-+
-+#define PFX	"board_livebox: "
-+
-+static unsigned int mac_addr_used = 0;
-+
-+/*
-+ * known 6348 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+static struct board_info __initdata board_livebox_blue5g = {
-+	.name = "Livebox-blue-5g",
-+	.expected_cpu_id = 0x6348,
-+
-+	.has_pccard = 1,
-+	.has_pci = 1,
-+	.has_ohci0 = 1,
-+	.ephy_reset_gpio = 6,
-+	.ephy_reset_gpio_flags = GPIO_ACTIVE_LOW,
-+
-+	.has_enet0 = 1,
-+	.enet0 = {
-+		.has_phy = 1,
-+		.use_internal_phy = 1,
-+	},
-+
-+	.has_enet1 = 1,
-+	.enet1 = {
-+		.has_phy = 1,
-+		.phy_id = 31,
-+	},
-+};
-+#endif
-+
-+/*
-+ * all boards
-+ */
-+static const struct board_info __initdata *bcm963xx_boards[] = {
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+	&board_livebox_blue5g
-+#endif /* CONFIG_BCM63XX_CPU_6348 */
-+};
-+
-+static struct of_device_id const livebox_boards_dt[] = {
-+	{ .compatible = "inventel,livebox-1", .data = &board_livebox_blue5g, },
-+	{ }
-+};
-+
-+/*
-+ * register & return a new board mac address
-+ */
-+static int livebox_get_mac_address(u8 mac[ETH_ALEN])
-+{
-+	u8 *p;
-+	int count;
-+	void __iomem *volatile mmio;
-+
-+	mmio = ioremap(0x1ebff377, 0x8);
-+	if (!mmio)
-+		return -EIO;
-+	memcpy_fromio(mac, mmio, ETH_ALEN);
-+	iounmap(mmio);
-+
-+	p = mac + ETH_ALEN - 1;
-+	count = mac_addr_used;
-+
-+	while (count--) {
-+		do {
-+			(*p)++;
-+			if (*p != 0)
-+				break;
-+			p--;
-+		} while (p != mac);
-+	}
-+
-+	if (p == mac) {
-+		printk(KERN_ERR PFX "unable to fetch mac address\n");
-+		return -ENODEV;
-+	}
-+	mac_addr_used++;
-+
-+	return 0;
-+}
-+
-+/*
-+ * early init callback
-+ */
-+#define LIVEBOX_GPIO_DETECT_MASK	0x000000ff
-+#define LIVEBOX_BOOT_ADDR		0x1e400000
-+
-+#define LIVEBOX_HW_BLUE5G_9		0x90
-+
-+void __init board_livebox_init(void)
-+{
-+	u32 val;
-+	u8 hw_version;
-+	const struct board_info *board;
-+	const struct of_device_id *board_match;
-+
-+	/* find board by compat */
-+	board_match = bcm63xx_match_board(livebox_boards_dt);
-+	if (board_match) {
-+		board = board_match->data;
-+	} else {
-+		/* Get hardware version */
-+		val = bcm_gpio_readl(GPIO_CTL_LO_REG);
-+		val &= ~LIVEBOX_GPIO_DETECT_MASK;
-+		bcm_gpio_writel(val, GPIO_CTL_LO_REG);
-+
-+		hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG);
-+		hw_version &= LIVEBOX_GPIO_DETECT_MASK;
-+
-+		switch (hw_version) {
-+		case LIVEBOX_HW_BLUE5G_9:
-+			printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
-+			board = bcm963xx_boards[0];
-+			break;
-+		default:
-+			printk(KERN_INFO PFX "Unknown livebox version: %02x\n",
-+			       hw_version);
-+			/* use default livebox configuration */
-+			board = bcm963xx_boards[0];
-+			break;
-+		}
-+	}
-+
-+	/* use default livebox configuration */
-+	board_early_setup(board, livebox_get_mac_address);
-+
-+	/* read base address of boot chip select (0) */
-+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+	val &= MPI_CSBASE_BASE_MASK;
-+	if (val != LIVEBOX_BOOT_ADDR) {
-+		printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
-+			val, LIVEBOX_BOOT_ADDR);
-+		bcm63xx_flash_force_phys_base_address(LIVEBOX_BOOT_ADDR, 0x1ebfffff);
-+	}
-+}
diff --git a/target/linux/bcm63xx/patches-5.4/800-wl_exports.patch b/target/linux/bcm63xx/patches-5.4/800-wl_exports.patch
deleted file mode 100644
index 7600a70c84..0000000000
--- a/target/linux/bcm63xx/patches-5.4/800-wl_exports.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/mips/bcm63xx/nvram.c
-+++ b/arch/mips/bcm63xx/nvram.c
-@@ -24,6 +24,12 @@
- static struct bcm963xx_nvram nvram;
- static int mac_addr_used;
- 
-+/*
-+ * Required export for WL
-+ */
-+u32 nvram_buf[5] = { 0, cpu_to_le32(20), 0, 0, 0 };
-+EXPORT_SYMBOL(nvram_buf);
-+
- void __init bcm63xx_nvram_init(void *addr)
- {
- 	u32 crc, expected_crc;
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -62,6 +62,9 @@ void (*_dma_cache_wback_inv)(unsigned lo
- void (*_dma_cache_wback)(unsigned long start, unsigned long size);
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- 
-+EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
-+
- #endif /* CONFIG_DMA_NONCOHERENT */
- 
- /*
diff --git a/target/linux/bcm63xx/patches-5.4/801-ssb_export_fallback_sprom.patch b/target/linux/bcm63xx/patches-5.4/801-ssb_export_fallback_sprom.patch
deleted file mode 100644
index 6e4e05a63b..0000000000
--- a/target/linux/bcm63xx/patches-5.4/801-ssb_export_fallback_sprom.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -8,6 +8,7 @@
-  */
- 
- #include <linux/init.h>
-+#include <linux/export.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
- #include <linux/platform_device.h>
-@@ -388,7 +389,19 @@ struct fallback_sprom_match {
- 	struct ssb_sprom sprom;
- };
- 
--static struct fallback_sprom_match fallback_sprom;
-+struct fallback_sprom_match fallback_sprom;
-+
-+int bcm63xx_get_fallback_sprom(uint pci_bus, uint pci_slot, struct ssb_sprom *out)
-+{
-+	if (pci_bus != fallback_sprom.pci_bus ||
-+	    pci_slot != fallback_sprom.pci_dev)
-+		pr_warn("fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
-+			fallback_sprom.pci_bus, fallback_sprom.pci_dev,
-+			pci_bus, pci_slot);
-+	memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
-+	return 0;
-+}
-+EXPORT_SYMBOL(bcm63xx_get_fallback_sprom);
- 
- #if defined(CONFIG_SSB_PCIHOST)
- int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
diff --git a/target/linux/bcm63xx/patches-5.4/802-rtl8367r_fix_RGMII_support.patch b/target/linux/bcm63xx/patches-5.4/802-rtl8367r_fix_RGMII_support.patch
deleted file mode 100644
index 2aca2f3f74..0000000000
--- a/target/linux/bcm63xx/patches-5.4/802-rtl8367r_fix_RGMII_support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From e3208e6087642b95a5bab3101fc9c6e34892c861 Mon Sep 17 00:00:00 2001
-From: Miguel GAIO <miguel.gaio@efixo.com>
-Date: Fri, 6 Jul 2012 14:12:33 +0200
-Subject: [PATCH 6/8] * [rtl8367r] Fix RGMII support
-
----
- drivers/net/phy/rtl8367.c  |    5 +++++
- 1 files changed, 5 insertions(+), 0 deletions(-)
-
---- a/drivers/net/phy/rtl8367.c
-+++ b/drivers/net/phy/rtl8367.c
-@@ -146,6 +146,10 @@
- #define   RTL8367_EXT_RGMXF_TXDELAY_MASK	1
- #define   RTL8367_EXT_RGMXF_RXDELAY_MASK	0x7
- 
-+#define RTL8367_PHY_AD_REG			0x130f
-+#define    RTL8370_PHY_AD_DUMMY_1_OFFSET	5
-+#define    RTL8370_PHY_AD_DUMMY_1_MASK		0xe0
-+
- #define RTL8367_DI_FORCE_REG(_x)		(0x1310 + (_x))
- #define   RTL8367_DI_FORCE_MODE			BIT(12)
- #define   RTL8367_DI_FORCE_NWAY			BIT(7)
-@@ -897,6 +901,7 @@ static int rtl8367_extif_set_mode(struct
- 	case RTL8367_EXTIF_MODE_RGMII_33V:
- 		REG_WR(smi, RTL8367_CHIP_DEBUG0_REG, 0x0367);
- 		REG_WR(smi, RTL8367_CHIP_DEBUG1_REG, 0x7777);
-+		REG_RMW(smi, RTL8367_PHY_AD_REG, BIT(5), 0);
- 		break;
- 
- 	case RTL8367_EXTIF_MODE_TMII_MAC:
diff --git a/target/linux/bcm63xx/patches-5.4/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch b/target/linux/bcm63xx/patches-5.4/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch
deleted file mode 100644
index 7a3c2f01c2..0000000000
--- a/target/linux/bcm63xx/patches-5.4/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From ff3409ab17d56450943364ba49a16960e3cdda9b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 6 Apr 2014 22:33:16 +0200
-Subject: [RFC] jffs2: work around unaligned accesses failing on bcm63xx/smp
-
-Unligned memcpy_fromio randomly fails with an unaligned dst. Work around
-it by ensuring we are always doing aligned copies.
-
-Should fix filename corruption in jffs2 with SMP.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- fs/jffs2/nodelist.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/fs/jffs2/nodelist.h
-+++ b/fs/jffs2/nodelist.h
-@@ -259,7 +259,7 @@ struct jffs2_full_dirent
- 	uint32_t ino; /* == zero for unlink */
- 	unsigned int nhash;
- 	unsigned char type;
--	unsigned char name[0];
-+	unsigned char name[0] __attribute__((aligned((sizeof(long)))));
- };
- 
- /*
diff --git a/target/linux/generic/backport-5.4/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch b/target/linux/generic/backport-5.4/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch
deleted file mode 100644
index 7ac4f9d240..0000000000
--- a/target/linux/generic/backport-5.4/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 13b1ecc3401653a355798eb1dee10cc1608202f4 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 18 Jan 2016 12:27:49 +0100
-Subject: [PATCH 33/34] Kbuild: don't hardcode path to awk in
- scripts/ld-version.sh
-
-On some systems /usr/bin/awk does not exist, or is broken. Find it via
-$PATH instead.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- scripts/ld-version.sh | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/scripts/ld-version.sh
-+++ b/scripts/ld-version.sh
-@@ -1,6 +1,7 @@
--#!/usr/bin/awk -f
-+#!/bin/sh
- # SPDX-License-Identifier: GPL-2.0
- # extract linker version number from stdin and turn into single number
-+exec awk '
- 	{
- 	gsub(".*\\)", "");
- 	gsub(".*version ", "");
-@@ -9,3 +10,4 @@
- 	print a[1]*100000000 + a[2]*1000000 + a[3]*10000;
- 	exit
- 	}
-+'
diff --git a/target/linux/generic/backport-5.4/011-kbuild-export-SUBARCH.patch b/target/linux/generic/backport-5.4/011-kbuild-export-SUBARCH.patch
deleted file mode 100644
index 60defa39c5..0000000000
--- a/target/linux/generic/backport-5.4/011-kbuild-export-SUBARCH.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 173019b66dcc9d68ad9333aa744dad1e369b5aa8 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 9 Jul 2017 00:26:53 +0200
-Subject: [PATCH 34/34] kernel: add compile fix for linux 4.9 on x86
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- Makefile | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -493,7 +493,7 @@ KBUILD_LDFLAGS :=
- GCC_PLUGINS_CFLAGS :=
- CLANG_FLAGS :=
- 
--export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC
-+export ARCH SRCARCH SUBARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC
- export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE READELF PAHOLE LEX YACC AWK INSTALLKERNEL
- export PERL PYTHON PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
- export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ
diff --git a/target/linux/generic/backport-5.4/025-power-reset-add-driver-for-LinkStation-power-off.patch b/target/linux/generic/backport-5.4/025-power-reset-add-driver-for-LinkStation-power-off.patch
deleted file mode 100644
index 7bf48c3405..0000000000
--- a/target/linux/generic/backport-5.4/025-power-reset-add-driver-for-LinkStation-power-off.patch
+++ /dev/null
@@ -1,199 +0,0 @@
-From a7f79f99541eff4e6bcae0014eb08d3019337565 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Daniel=20Gonz=C3=A1lez=20Cabanelas?= <dgcbueu@gmail.com>
-Date: Wed, 15 Jul 2020 15:35:14 +0200
-Subject: [PATCH] power: reset: add driver for LinkStation power off
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some Buffalo LinkStations perform the power off operation, at restart
-time, depending on the state of an output pin (LED2/INTn) at the ethernet
-PHY. This pin is also used to wake the machine when a WoL packet is
-received by the PHY.
-
-The driver is required by the Buffalo LinkStation LS421DE (ARM MVEBU),
-and other models. Without it, the board remains forever halted if a
-power off command is executed, unless the PSU is disconnected and
-connected again.
-
-Add the driver to provide the power off function and also make the WoL
-feature to be available.
-
-Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
-Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
----
- drivers/power/reset/Kconfig                |  11 ++
- drivers/power/reset/Makefile               |   1 +
- drivers/power/reset/linkstation-poweroff.c | 136 +++++++++++++++++++++
- 3 files changed, 148 insertions(+)
- create mode 100644 drivers/power/reset/linkstation-poweroff.c
-
---- a/drivers/power/reset/Kconfig
-+++ b/drivers/power/reset/Kconfig
-@@ -99,6 +99,17 @@ config POWER_RESET_HISI
- 	help
- 	  Reboot support for Hisilicon boards.
- 
-+config POWER_RESET_LINKSTATION
-+	tristate "Buffalo LinkStation power-off driver"
-+	depends on ARCH_MVEBU || COMPILE_TEST
-+	depends on OF_MDIO && PHYLIB
-+	help
-+	  This driver supports turning off some Buffalo LinkStations by
-+	  setting an output pin at the ethernet PHY to the correct state.
-+	  It also makes the device compatible with the WoL function.
-+
-+	  Say Y here if you have a Buffalo LinkStation LS421D/E.
-+
- config POWER_RESET_MSM
- 	bool "Qualcomm MSM power-off driver"
- 	depends on ARCH_QCOM
---- a/drivers/power/reset/Makefile
-+++ b/drivers/power/reset/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_POWER_RESET_GEMINI_POWEROFF
- obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
- obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
- obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
-+obj-${CONFIG_POWER_RESET_LINKSTATION} += linkstation-poweroff.o
- obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
- obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
- obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
---- /dev/null
-+++ b/drivers/power/reset/linkstation-poweroff.c
-@@ -0,0 +1,136 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * LinkStation power off restart driver
-+ * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/notifier.h>
-+#include <linux/of.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_platform.h>
-+#include <linux/reboot.h>
-+#include <linux/phy.h>
-+
-+/* Defines from the eth phy Marvell driver */
-+#define MII_MARVELL_COPPER_PAGE		0
-+#define MII_MARVELL_LED_PAGE		3
-+#define MII_MARVELL_WOL_PAGE		17
-+#define MII_MARVELL_PHY_PAGE		22
-+
-+#define MII_PHY_LED_CTRL		16
-+#define MII_88E1318S_PHY_LED_TCR	18
-+#define MII_88E1318S_PHY_WOL_CTRL	16
-+#define MII_M1011_IEVENT		19
-+
-+#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE		BIT(7)
-+#define MII_88E1318S_PHY_LED_TCR_FORCE_INT		BIT(15)
-+#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS	BIT(12)
-+#define LED2_FORCE_ON					(0x8 << 8)
-+#define LEDMASK						GENMASK(11,8)
-+
-+static struct phy_device *phydev;
-+
-+static void mvphy_reg_intn(u16 data)
-+{
-+	int rc = 0, saved_page;
-+
-+	saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
-+	if (saved_page < 0)
-+		goto err;
-+
-+	/* Force manual LED2 control to let INTn work */
-+	__phy_modify(phydev, MII_PHY_LED_CTRL, LEDMASK, LED2_FORCE_ON);
-+
-+	/* Set the LED[2]/INTn pin to the required state */
-+	__phy_modify(phydev, MII_88E1318S_PHY_LED_TCR,
-+		     MII_88E1318S_PHY_LED_TCR_FORCE_INT,
-+		     MII_88E1318S_PHY_LED_TCR_INTn_ENABLE | data);
-+
-+	if (!data) {
-+		/* Clear interrupts to ensure INTn won't be holded in high state */
-+		__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_COPPER_PAGE);
-+		__phy_read(phydev, MII_M1011_IEVENT);
-+
-+		/* If WOL was enabled and a magic packet was received before powering
-+		 * off, we won't be able to wake up by sending another magic packet.
-+		 * Clear WOL status.
-+		 */
-+		__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE);
-+		__phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
-+			       MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
-+	}
-+err:
-+	rc = phy_restore_page(phydev, saved_page, rc);
-+	if (rc < 0)
-+		dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
-+}
-+
-+static int linkstation_reboot_notifier(struct notifier_block *nb,
-+				       unsigned long action, void *unused)
-+{
-+	if (action == SYS_RESTART)
-+		mvphy_reg_intn(MII_88E1318S_PHY_LED_TCR_FORCE_INT);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block linkstation_reboot_nb = {
-+	.notifier_call = linkstation_reboot_notifier,
-+};
-+
-+static void linkstation_poweroff(void)
-+{
-+	unregister_reboot_notifier(&linkstation_reboot_nb);
-+	mvphy_reg_intn(0);
-+
-+	kernel_restart("Power off");
-+}
-+
-+static const struct of_device_id ls_poweroff_of_match[] = {
-+	{ .compatible = "buffalo,ls421d" },
-+	{ .compatible = "buffalo,ls421de" },
-+	{ },
-+};
-+
-+static int __init linkstation_poweroff_init(void)
-+{
-+	struct mii_bus *bus;
-+	struct device_node *dn;
-+
-+	dn = of_find_matching_node(NULL, ls_poweroff_of_match);
-+	if (!dn)
-+		return -ENODEV;
-+	of_node_put(dn);
-+
-+	dn = of_find_node_by_name(NULL, "mdio");
-+	if (!dn)
-+		return -ENODEV;
-+
-+	bus = of_mdio_find_bus(dn);
-+	of_node_put(dn);
-+	if (!bus)
-+		return -EPROBE_DEFER;
-+
-+	phydev = phy_find_first(bus);
-+	if (!phydev)
-+		return -EPROBE_DEFER;
-+
-+	register_reboot_notifier(&linkstation_reboot_nb);
-+	pm_power_off = linkstation_poweroff;
-+
-+	return 0;
-+}
-+
-+static void __exit linkstation_poweroff_exit(void)
-+{
-+	pm_power_off = NULL;
-+	unregister_reboot_notifier(&linkstation_reboot_nb);
-+}
-+
-+module_init(linkstation_poweroff_init);
-+module_exit(linkstation_poweroff_exit);
-+
-+MODULE_AUTHOR("Daniel González Cabanelas <dgcbueu@gmail.com>");
-+MODULE_DESCRIPTION("LinkStation power off driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/backport-5.4/026-power-reset-linkstation-poweroff-add-missing-put_dev.patch b/target/linux/generic/backport-5.4/026-power-reset-linkstation-poweroff-add-missing-put_dev.patch
deleted file mode 100644
index 66e75bf514..0000000000
--- a/target/linux/generic/backport-5.4/026-power-reset-linkstation-poweroff-add-missing-put_dev.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 1027a42c25cbf8cfc4ade6503c5110aae04866af Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Daniel=20Gonz=C3=A1lez=20Cabanelas?= <dgcbueu@gmail.com>
-Date: Fri, 16 Oct 2020 20:22:37 +0200
-Subject: [PATCH] power: reset: linkstation-poweroff: add missing put_device()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The of_mdio_find_bus() takes a reference to the underlying device
-structure, we should release that reference using a put_device() call.
-
-Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
-Signed-off-by: Sebastian Reichel <sre@kernel.org>
----
- drivers/power/reset/linkstation-poweroff.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/power/reset/linkstation-poweroff.c
-+++ b/drivers/power/reset/linkstation-poweroff.c
-@@ -113,6 +113,7 @@ static int __init linkstation_poweroff_i
- 		return -EPROBE_DEFER;
- 
- 	phydev = phy_find_first(bus);
-+	put_device(&bus->dev);
- 	if (!phydev)
- 		return -EPROBE_DEFER;
- 
diff --git a/target/linux/generic/backport-5.4/030-modpost-add-a-helper-to-get-data-pointed-by-a-symbol.patch b/target/linux/generic/backport-5.4/030-modpost-add-a-helper-to-get-data-pointed-by-a-symbol.patch
deleted file mode 100644
index cf88c0c69f..0000000000
--- a/target/linux/generic/backport-5.4/030-modpost-add-a-helper-to-get-data-pointed-by-a-symbol.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From afa0459daa7b08c7b2c879705b69d39b734a11d0 Mon Sep 17 00:00:00 2001
-From: Masahiro Yamada <yamada.masahiro@socionext.com>
-Date: Fri, 15 Nov 2019 02:42:21 +0900
-Subject: [PATCH] modpost: add a helper to get data pointed by a symbol
-
-When CONFIG_MODULE_REL_CRCS is enabled, the value of __crc_* is not
-an absolute value, but the address to the CRC data embedded in the
-.rodata section.
-
-Getting the data pointed by the symbol value is somewhat complex.
-Split it out into a new helper, sym_get_data().
-
-I will reuse it to refactor namespace_from_kstrtabns() in the next
-commit.
-
-Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
----
- scripts/mod/modpost.c | 17 +++++++++++++----
- 1 file changed, 13 insertions(+), 4 deletions(-)
-
---- a/scripts/mod/modpost.c
-+++ b/scripts/mod/modpost.c
-@@ -312,6 +312,18 @@ static const char *sec_name(struct elf_i
- 	return sech_name(elf, &elf->sechdrs[secindex]);
- }
- 
-+static void *sym_get_data(const struct elf_info *info, const Elf_Sym *sym)
-+{
-+	Elf_Shdr *sechdr = &info->sechdrs[sym->st_shndx];
-+	unsigned long offset;
-+
-+	offset = sym->st_value;
-+	if (info->hdr->e_type != ET_REL)
-+		offset -= sechdr->sh_addr;
-+
-+	return (void *)info->hdr + sechdr->sh_offset + offset;
-+}
-+
- #define strstarts(str, prefix) (strncmp(str, prefix, strlen(prefix)) == 0)
- 
- static enum export export_from_secname(struct elf_info *elf, unsigned int sec)
-@@ -701,10 +713,7 @@ static void handle_modversions(struct mo
- 			unsigned int *crcp;
- 
- 			/* symbol points to the CRC in the ELF object */
--			crcp = (void *)info->hdr + sym->st_value +
--			       info->sechdrs[sym->st_shndx].sh_offset -
--			       (info->hdr->e_type != ET_REL ?
--				info->sechdrs[sym->st_shndx].sh_addr : 0);
-+			crcp = sym_get_data(info, sym);
- 			crc = TO_NATIVE(*crcp);
- 		}
- 		sym_update_crc(symname + strlen("__crc_"), mod, crc,
diff --git a/target/linux/generic/backport-5.4/031-modpost-refactor-namespace_from_kstrtabns-to-not-har.patch b/target/linux/generic/backport-5.4/031-modpost-refactor-namespace_from_kstrtabns-to-not-har.patch
deleted file mode 100644
index 230dc6b89a..0000000000
--- a/target/linux/generic/backport-5.4/031-modpost-refactor-namespace_from_kstrtabns-to-not-har.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From e84f9fbbece1585f45a03ccc11eeabe121cadc1b Mon Sep 17 00:00:00 2001
-From: Masahiro Yamada <yamada.masahiro@socionext.com>
-Date: Fri, 15 Nov 2019 02:42:22 +0900
-Subject: [PATCH] modpost: refactor namespace_from_kstrtabns() to not hard-code
- section name
-
-Currently, namespace_from_kstrtabns() relies on the fact that
-namespace strings are recorded in the __ksymtab_strings section.
-Actually, it is coded in include/linux/export.h, but modpost does
-not need to hard-code the section name.
-
-Elf_Sym::st_shndx holds the index of the relevant section. Using it is
-a more portable way to get the namespace string.
-
-Make namespace_from_kstrtabns() simply call sym_get_data(), and delete
-the info->ksymtab_strings .
-
-While I was here, I added more 'const' qualifiers to pointers.
-
-Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
----
- scripts/mod/modpost.c | 10 +++-------
- scripts/mod/modpost.h |  1 -
- 2 files changed, 3 insertions(+), 8 deletions(-)
-
---- a/scripts/mod/modpost.c
-+++ b/scripts/mod/modpost.c
-@@ -360,10 +360,10 @@ static enum export export_from_sec(struc
- 		return export_unknown;
- }
- 
--static const char *namespace_from_kstrtabns(struct elf_info *info,
--					    Elf_Sym *kstrtabns)
-+static const char *namespace_from_kstrtabns(const struct elf_info *info,
-+					    const Elf_Sym *sym)
- {
--	char *value = info->ksymtab_strings + kstrtabns->st_value;
-+	const char *value = sym_get_data(info, sym);
- 	return value[0] ? value : NULL;
- }
- 
-@@ -605,10 +605,6 @@ static int parse_elf(struct elf_info *in
- 			info->export_unused_gpl_sec = i;
- 		else if (strcmp(secname, "__ksymtab_gpl_future") == 0)
- 			info->export_gpl_future_sec = i;
--		else if (strcmp(secname, "__ksymtab_strings") == 0)
--			info->ksymtab_strings = (void *)hdr +
--						sechdrs[i].sh_offset -
--						sechdrs[i].sh_addr;
- 
- 		if (sechdrs[i].sh_type == SHT_SYMTAB) {
- 			unsigned int sh_link_idx;
---- a/scripts/mod/modpost.h
-+++ b/scripts/mod/modpost.h
-@@ -143,7 +143,6 @@ struct elf_info {
- 	Elf_Section  export_gpl_sec;
- 	Elf_Section  export_unused_gpl_sec;
- 	Elf_Section  export_gpl_future_sec;
--	char	     *ksymtab_strings;
- 	char         *strtab;
- 	char	     *modinfo;
- 	unsigned int modinfo_len;
diff --git a/target/linux/generic/backport-5.4/041-v5.5-arm64-Implement-optimised-checksum-routine.patch b/target/linux/generic/backport-5.4/041-v5.5-arm64-Implement-optimised-checksum-routine.patch
deleted file mode 100644
index 00ec7d0207..0000000000
--- a/target/linux/generic/backport-5.4/041-v5.5-arm64-Implement-optimised-checksum-routine.patch
+++ /dev/null
@@ -1,176 +0,0 @@
-From: Robin Murphy <robin.murphy@arm.com>
-Date: Wed, 15 Jan 2020 16:42:39 +0000
-Subject: [PATCH] arm64: Implement optimised checksum routine
-
-Apparently there exist certain workloads which rely heavily on software
-checksumming, for which the generic do_csum() implementation becomes a
-significant bottleneck. Therefore let's give arm64 its own optimised
-version - for ease of maintenance this foregoes assembly or intrisics,
-and is thus not actually arm64-specific, but does rely heavily on C
-idioms that translate well to the A64 ISA and the typical load/store
-capabilities of most ARMv8 CPU cores.
-
-The resulting increase in checksum throughput scales nicely with buffer
-size, tending towards 4x for a small in-order core (Cortex-A53), and up
-to 6x or more for an aggressive big core (Ampere eMAG).
-
-Reported-by: Lingyan Huang <huanglingyan2@huawei.com>
-Tested-by: Lingyan Huang <huanglingyan2@huawei.com>
-Signed-off-by: Robin Murphy <robin.murphy@arm.com>
-Signed-off-by: Will Deacon <will@kernel.org>
----
- create mode 100644 arch/arm64/lib/csum.c
-
---- a/arch/arm64/include/asm/checksum.h
-+++ b/arch/arm64/include/asm/checksum.h
-@@ -36,6 +36,9 @@ static inline __sum16 ip_fast_csum(const
- }
- #define ip_fast_csum ip_fast_csum
- 
-+extern unsigned int do_csum(const unsigned char *buff, int len);
-+#define do_csum do_csum
-+
- #include <asm-generic/checksum.h>
- 
- #endif	/* __ASM_CHECKSUM_H */
---- a/arch/arm64/lib/Makefile
-+++ b/arch/arm64/lib/Makefile
-@@ -1,9 +1,9 @@
- # SPDX-License-Identifier: GPL-2.0
- lib-y		:= clear_user.o delay.o copy_from_user.o		\
- 		   copy_to_user.o copy_in_user.o copy_page.o		\
--		   clear_page.o memchr.o memcpy.o memmove.o memset.o	\
--		   memcmp.o strcmp.o strncmp.o strlen.o strnlen.o	\
--		   strchr.o strrchr.o tishift.o
-+		   clear_page.o csum.o memchr.o memcpy.o memmove.o	\
-+		   memset.o memcmp.o strcmp.o strncmp.o strlen.o	\
-+		   strnlen.o strchr.o strrchr.o tishift.o
- 
- ifeq ($(CONFIG_KERNEL_MODE_NEON), y)
- obj-$(CONFIG_XOR_BLOCKS)	+= xor-neon.o
---- /dev/null
-+++ b/arch/arm64/lib/csum.c
-@@ -0,0 +1,123 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+// Copyright (C) 2019-2020 Arm Ltd.
-+
-+#include <linux/compiler.h>
-+#include <linux/kasan-checks.h>
-+#include <linux/kernel.h>
-+
-+#include <net/checksum.h>
-+
-+/* Looks dumb, but generates nice-ish code */
-+static u64 accumulate(u64 sum, u64 data)
-+{
-+	__uint128_t tmp = (__uint128_t)sum + data;
-+	return tmp + (tmp >> 64);
-+}
-+
-+unsigned int do_csum(const unsigned char *buff, int len)
-+{
-+	unsigned int offset, shift, sum;
-+	const u64 *ptr;
-+	u64 data, sum64 = 0;
-+
-+	offset = (unsigned long)buff & 7;
-+	/*
-+	 * This is to all intents and purposes safe, since rounding down cannot
-+	 * result in a different page or cache line being accessed, and @buff
-+	 * should absolutely not be pointing to anything read-sensitive. We do,
-+	 * however, have to be careful not to piss off KASAN, which means using
-+	 * unchecked reads to accommodate the head and tail, for which we'll
-+	 * compensate with an explicit check up-front.
-+	 */
-+	kasan_check_read(buff, len);
-+	ptr = (u64 *)(buff - offset);
-+	len = len + offset - 8;
-+
-+	/*
-+	 * Head: zero out any excess leading bytes. Shifting back by the same
-+	 * amount should be at least as fast as any other way of handling the
-+	 * odd/even alignment, and means we can ignore it until the very end.
-+	 */
-+	shift = offset * 8;
-+	data = READ_ONCE_NOCHECK(*ptr++);
-+#ifdef __LITTLE_ENDIAN
-+	data = (data >> shift) << shift;
-+#else
-+	data = (data << shift) >> shift;
-+#endif
-+
-+	/*
-+	 * Body: straightforward aligned loads from here on (the paired loads
-+	 * underlying the quadword type still only need dword alignment). The
-+	 * main loop strictly excludes the tail, so the second loop will always
-+	 * run at least once.
-+	 */
-+	while (unlikely(len > 64)) {
-+		__uint128_t tmp1, tmp2, tmp3, tmp4;
-+
-+		tmp1 = READ_ONCE_NOCHECK(*(__uint128_t *)ptr);
-+		tmp2 = READ_ONCE_NOCHECK(*(__uint128_t *)(ptr + 2));
-+		tmp3 = READ_ONCE_NOCHECK(*(__uint128_t *)(ptr + 4));
-+		tmp4 = READ_ONCE_NOCHECK(*(__uint128_t *)(ptr + 6));
-+
-+		len -= 64;
-+		ptr += 8;
-+
-+		/* This is the "don't dump the carry flag into a GPR" idiom */
-+		tmp1 += (tmp1 >> 64) | (tmp1 << 64);
-+		tmp2 += (tmp2 >> 64) | (tmp2 << 64);
-+		tmp3 += (tmp3 >> 64) | (tmp3 << 64);
-+		tmp4 += (tmp4 >> 64) | (tmp4 << 64);
-+		tmp1 = ((tmp1 >> 64) << 64) | (tmp2 >> 64);
-+		tmp1 += (tmp1 >> 64) | (tmp1 << 64);
-+		tmp3 = ((tmp3 >> 64) << 64) | (tmp4 >> 64);
-+		tmp3 += (tmp3 >> 64) | (tmp3 << 64);
-+		tmp1 = ((tmp1 >> 64) << 64) | (tmp3 >> 64);
-+		tmp1 += (tmp1 >> 64) | (tmp1 << 64);
-+		tmp1 = ((tmp1 >> 64) << 64) | sum64;
-+		tmp1 += (tmp1 >> 64) | (tmp1 << 64);
-+		sum64 = tmp1 >> 64;
-+	}
-+	while (len > 8) {
-+		__uint128_t tmp;
-+
-+		sum64 = accumulate(sum64, data);
-+		tmp = READ_ONCE_NOCHECK(*(__uint128_t *)ptr);
-+
-+		len -= 16;
-+		ptr += 2;
-+
-+#ifdef __LITTLE_ENDIAN
-+		data = tmp >> 64;
-+		sum64 = accumulate(sum64, tmp);
-+#else
-+		data = tmp;
-+		sum64 = accumulate(sum64, tmp >> 64);
-+#endif
-+	}
-+	if (len > 0) {
-+		sum64 = accumulate(sum64, data);
-+		data = READ_ONCE_NOCHECK(*ptr);
-+		len -= 8;
-+	}
-+	/*
-+	 * Tail: zero any over-read bytes similarly to the head, again
-+	 * preserving odd/even alignment.
-+	 */
-+	shift = len * -8;
-+#ifdef __LITTLE_ENDIAN
-+	data = (data << shift) >> shift;
-+#else
-+	data = (data >> shift) << shift;
-+#endif
-+	sum64 = accumulate(sum64, data);
-+
-+	/* Finally, folding */
-+	sum64 += (sum64 >> 32) | (sum64 << 32);
-+	sum = sum64 >> 32;
-+	sum += (sum >> 16) | (sum << 16);
-+	if (offset & 1)
-+		return (u16)swab32(sum);
-+
-+	return sum >> 16;
-+}
diff --git a/target/linux/generic/backport-5.4/042-v5.5-arm64-csum-Fix-pathological-zero-length-calls.patch b/target/linux/generic/backport-5.4/042-v5.5-arm64-csum-Fix-pathological-zero-length-calls.patch
deleted file mode 100644
index 50b210e14f..0000000000
--- a/target/linux/generic/backport-5.4/042-v5.5-arm64-csum-Fix-pathological-zero-length-calls.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: Robin Murphy <robin.murphy@arm.com>
-Date: Fri, 17 Jan 2020 15:48:39 +0000
-Subject: [PATCH] arm64: csum: Fix pathological zero-length calls
-
-In validating the checksumming results of the new routine, I sadly
-neglected to test its not-checksumming results. Thus it slipped through
-that the one case where @buff is already dword-aligned and @len = 0
-manages to defeat the tail-masking logic and behave as if @len = 8.
-For a zero length it doesn't make much sense to deference @buff anyway,
-so just add an early return (which has essentially zero impact on
-performance).
-
-Signed-off-by: Robin Murphy <robin.murphy@arm.com>
-Signed-off-by: Will Deacon <will@kernel.org>
----
-
---- a/arch/arm64/lib/csum.c
-+++ b/arch/arm64/lib/csum.c
-@@ -20,6 +20,9 @@ unsigned int do_csum(const unsigned char
- 	const u64 *ptr;
- 	u64 data, sum64 = 0;
- 
-+	if (unlikely(len == 0))
-+		return 0;
-+
- 	offset = (unsigned long)buff & 7;
- 	/*
- 	 * This is to all intents and purposes safe, since rounding down cannot
diff --git a/target/linux/generic/backport-5.4/071-v5.16-00-MIPS-uasm-Enable-muhu-opcode-for-MIPS-R6.patch b/target/linux/generic/backport-5.4/071-v5.16-00-MIPS-uasm-Enable-muhu-opcode-for-MIPS-R6.patch
deleted file mode 100644
index 82feb7421d..0000000000
--- a/target/linux/generic/backport-5.4/071-v5.16-00-MIPS-uasm-Enable-muhu-opcode-for-MIPS-R6.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Date: Tue, 5 Oct 2021 18:54:02 +0200
-Subject: [PATCH] MIPS: uasm: Enable muhu opcode for MIPS R6
-
-Enable the 'muhu' instruction, complementing the existing 'mulu', needed
-to implement a MIPS32 BPF JIT.
-
-Also fix a typo in the existing definition of 'dmulu'.
-
-Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
-
-This patch is a dependency for my 32-bit MIPS eBPF JIT.
-
-Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
----
-
---- a/arch/mips/include/asm/uasm.h
-+++ b/arch/mips/include/asm/uasm.h
-@@ -145,6 +145,7 @@ Ip_u1(_mtlo);
- Ip_u3u1u2(_mul);
- Ip_u1u2(_multu);
- Ip_u3u1u2(_mulu);
-+Ip_u3u1u2(_muhu);
- Ip_u3u1u2(_nor);
- Ip_u3u1u2(_or);
- Ip_u2u1u3(_ori);
---- a/arch/mips/mm/uasm-mips.c
-+++ b/arch/mips/mm/uasm-mips.c
-@@ -90,7 +90,7 @@ static const struct insn insn_table[insn
- 				RS | RT | RD},
- 	[insn_dmtc0]	= {M(cop0_op, dmtc_op, 0, 0, 0, 0), RT | RD | SET},
- 	[insn_dmultu]	= {M(spec_op, 0, 0, 0, 0, dmultu_op), RS | RT},
--	[insn_dmulu]	= {M(spec_op, 0, 0, 0, dmult_dmul_op, dmultu_op),
-+	[insn_dmulu]	= {M(spec_op, 0, 0, 0, dmultu_dmulu_op, dmultu_op),
- 				RS | RT | RD},
- 	[insn_drotr]	= {M(spec_op, 1, 0, 0, 0, dsrl_op), RT | RD | RE},
- 	[insn_drotr32]	= {M(spec_op, 1, 0, 0, 0, dsrl32_op), RT | RD | RE},
-@@ -150,6 +150,8 @@ static const struct insn insn_table[insn
- 	[insn_mtlo]	= {M(spec_op, 0, 0, 0, 0, mtlo_op), RS},
- 	[insn_mulu]	= {M(spec_op, 0, 0, 0, multu_mulu_op, multu_op),
- 				RS | RT | RD},
-+	[insn_muhu]	= {M(spec_op, 0, 0, 0, multu_muhu_op, multu_op),
-+				RS | RT | RD},
- #ifndef CONFIG_CPU_MIPSR6
- 	[insn_mul]	= {M(spec2_op, 0, 0, 0, 0, mul_op), RS | RT | RD},
- #else
---- a/arch/mips/mm/uasm.c
-+++ b/arch/mips/mm/uasm.c
-@@ -59,7 +59,7 @@ enum opcode {
- 	insn_lddir, insn_ldpte, insn_ldx, insn_lh, insn_lhu, insn_ll, insn_lld,
- 	insn_lui, insn_lw, insn_lwu, insn_lwx, insn_mfc0, insn_mfhc0, insn_mfhi,
- 	insn_mflo, insn_modu, insn_movn, insn_movz, insn_mtc0, insn_mthc0,
--	insn_mthi, insn_mtlo, insn_mul, insn_multu, insn_mulu, insn_nor,
-+	insn_mthi, insn_mtlo, insn_mul, insn_multu, insn_mulu, insn_muhu, insn_nor,
- 	insn_or, insn_ori, insn_pref, insn_rfe, insn_rotr, insn_sb, insn_sc,
- 	insn_scd, insn_seleqz, insn_selnez, insn_sd, insn_sh, insn_sll,
- 	insn_sllv, insn_slt, insn_slti, insn_sltiu, insn_sltu, insn_sra,
-@@ -344,6 +344,7 @@ I_u1(_mtlo)
- I_u3u1u2(_mul)
- I_u1u2(_multu)
- I_u3u1u2(_mulu)
-+I_u3u1u2(_muhu)
- I_u3u1u2(_nor)
- I_u3u1u2(_or)
- I_u2u1u3(_ori)
diff --git a/target/linux/generic/backport-5.4/071-v5.16-01-mips-uasm-Add-workaround-for-Loongson-2F-nop-CPU-err.patch b/target/linux/generic/backport-5.4/071-v5.16-01-mips-uasm-Add-workaround-for-Loongson-2F-nop-CPU-err.patch
deleted file mode 100644
index 3a4d573f80..0000000000
--- a/target/linux/generic/backport-5.4/071-v5.16-01-mips-uasm-Add-workaround-for-Loongson-2F-nop-CPU-err.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Date: Tue, 5 Oct 2021 18:54:03 +0200
-Subject: [PATCH] mips: uasm: Add workaround for Loongson-2F nop CPU errata
-
-This patch implements a workaround for the Loongson-2F nop in generated,
-code, if the existing option CONFIG_CPU_NOP_WORKAROUND is set. Before,
-the binutils option -mfix-loongson2f-nop was enabled, but no workaround
-was done when emitting MIPS code. Now, the nop pseudo instruction is
-emitted as "or ax,ax,zero" instead of the default "sll zero,zero,0". This
-is consistent with the workaround implemented by binutils.
-
-Link: https://sourceware.org/legacy-ml/binutils/2009-11/msg00387.html
-
-Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
----
-
---- a/arch/mips/include/asm/uasm.h
-+++ b/arch/mips/include/asm/uasm.h
-@@ -249,7 +249,11 @@ static inline void uasm_l##lb(struct uas
- #define uasm_i_bnezl(buf, rs, off) uasm_i_bnel(buf, rs, 0, off)
- #define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3)
- #define uasm_i_move(buf, a, b) UASM_i_ADDU(buf, a, 0, b)
-+#ifdef CONFIG_CPU_NOP_WORKAROUNDS
-+#define uasm_i_nop(buf) uasm_i_or(buf, 1, 1, 0)
-+#else
- #define uasm_i_nop(buf) uasm_i_sll(buf, 0, 0, 0)
-+#endif
- #define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1)
- 
- static inline void uasm_i_drotr_safe(u32 **p, unsigned int a1,
diff --git a/target/linux/generic/backport-5.4/071-v5.16-02-mips-bpf-Add-eBPF-JIT-for-32-bit-MIPS.patch b/target/linux/generic/backport-5.4/071-v5.16-02-mips-bpf-Add-eBPF-JIT-for-32-bit-MIPS.patch
deleted file mode 100644
index 7980659961..0000000000
--- a/target/linux/generic/backport-5.4/071-v5.16-02-mips-bpf-Add-eBPF-JIT-for-32-bit-MIPS.patch
+++ /dev/null
@@ -1,3078 +0,0 @@
-From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Date: Tue, 5 Oct 2021 18:54:04 +0200
-Subject: [PATCH] mips: bpf: Add eBPF JIT for 32-bit MIPS
-
-This is an implementation of an eBPF JIT for 32-bit MIPS I-V and MIPS32.
-The implementation supports all 32-bit and 64-bit ALU and JMP operations,
-including the recently-added atomics. 64-bit div/mod and 64-bit atomics
-are implemented using function calls to math64 and atomic64 functions,
-respectively. All 32-bit operations are implemented natively by the JIT,
-except if the CPU lacks ll/sc instructions.
-
-Register mapping
-================
-All 64-bit eBPF registers are mapped to native 32-bit MIPS register pairs,
-and does not use any stack scratch space for register swapping. This means
-that all eBPF register data is kept in CPU registers all the time, and
-this simplifies the register management a lot. It also reduces the JIT's
-pressure on temporary registers since we do not have to move data around.
-
-Native register pairs are ordered according to CPU endiannes, following
-the O32 calling convention for passing 64-bit arguments and return values.
-The eBPF return value, arguments and callee-saved registers are mapped to
-their native MIPS equivalents.
-
-Since the 32 highest bits in the eBPF FP (frame pointer) register are
-always zero, only one general-purpose register is actually needed for the
-mapping. The MIPS fp register is used for this purpose. The high bits are
-mapped to MIPS register r0. This saves us one CPU register, which is much
-needed for temporaries, while still allowing us to treat the R10 (FP)
-register just like any other eBPF register in the JIT.
-
-The MIPS gp (global pointer) and at (assembler temporary) registers are
-used as internal temporary registers for constant blinding. CPU registers
-t6-t9 are used internally by the JIT when constructing more complex 64-bit
-operations. This is precisely what is needed - two registers to store an
-operand value, and two more as scratch registers when performing the
-operation.
-
-The register mapping is shown below.
-
-    R0 - $v1, $v0   return value
-    R1 - $a1, $a0   argument 1, passed in registers
-    R2 - $a3, $a2   argument 2, passed in registers
-    R3 - $t1, $t0   argument 3, passed on stack
-    R4 - $t3, $t2   argument 4, passed on stack
-    R5 - $t4, $t3   argument 5, passed on stack
-    R6 - $s1, $s0   callee-saved
-    R7 - $s3, $s2   callee-saved
-    R8 - $s5, $s4   callee-saved
-    R9 - $s7, $s6   callee-saved
-    FP - $r0, $fp   32-bit frame pointer
-    AX - $gp, $at   constant-blinding
-         $t6 - $t9  unallocated, JIT temporaries
-
-Jump offsets
-============
-The JIT tries to map all conditional JMP operations to MIPS conditional
-PC-relative branches. The MIPS branch offset field is 18 bits, in bytes,
-which is equivalent to the eBPF 16-bit instruction offset. However, since
-the JIT may emit more than one CPU instruction per eBPF instruction, the
-field width may overflow. If that happens, the JIT converts the long
-conditional jump to a short PC-relative branch with the condition
-inverted, jumping over a long unconditional absolute jmp (j).
-
-This conversion will change the instruction offset mapping used for jumps,
-and may in turn result in more branch offset overflows. The JIT therefore
-dry-runs the translation until no more branches are converted and the
-offsets do not change anymore. There is an upper bound on this of course,
-and if the JIT hits that limit, the last two iterations are run with all
-branches being converted.
-
-Tail call count
-===============
-The current tail call count is stored in the 16-byte area of the caller's
-stack frame that is reserved for the callee in the o32 ABI. The value is
-initialized in the prologue, and propagated to the tail-callee by skipping
-the initialization instructions when emitting the tail call.
-
-Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
----
- create mode 100644 arch/mips/net/bpf_jit_comp.c
- create mode 100644 arch/mips/net/bpf_jit_comp.h
- create mode 100644 arch/mips/net/bpf_jit_comp32.c
-
---- a/arch/mips/net/Makefile
-+++ b/arch/mips/net/Makefile
-@@ -2,4 +2,9 @@
- # MIPS networking code
- 
- obj-$(CONFIG_MIPS_CBPF_JIT) += bpf_jit.o bpf_jit_asm.o
--obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o
-+
-+ifeq ($(CONFIG_32BIT),y)
-+        obj-$(CONFIG_MIPS_EBPF_JIT) += bpf_jit_comp.o bpf_jit_comp32.o
-+else
-+        obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o
-+endif
---- /dev/null
-+++ b/arch/mips/net/bpf_jit_comp.c
-@@ -0,0 +1,1020 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Just-In-Time compiler for eBPF bytecode on MIPS.
-+ * Implementation of JIT functions common to 32-bit and 64-bit CPUs.
-+ *
-+ * Copyright (c) 2021 Anyfi Networks AB.
-+ * Author: Johan Almbladh <johan.almbladh@gmail.com>
-+ *
-+ * Based on code and ideas from
-+ * Copyright (c) 2017 Cavium, Inc.
-+ * Copyright (c) 2017 Shubham Bansal <illusionist.neo@gmail.com>
-+ * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com>
-+ */
-+
-+/*
-+ * Code overview
-+ * =============
-+ *
-+ * - bpf_jit_comp.h
-+ *   Common definitions and utilities.
-+ *
-+ * - bpf_jit_comp.c
-+ *   Implementation of JIT top-level logic and exported JIT API functions.
-+ *   Implementation of internal operations shared by 32-bit and 64-bit code.
-+ *   JMP and ALU JIT control code, register control code, shared ALU and
-+ *   JMP/JMP32 JIT operations.
-+ *
-+ * - bpf_jit_comp32.c
-+ *   Implementation of functions to JIT prologue, epilogue and a single eBPF
-+ *   instruction for 32-bit MIPS CPUs. The functions use shared operations
-+ *   where possible, and implement the rest for 32-bit MIPS such as ALU64
-+ *   operations.
-+ *
-+ * - bpf_jit_comp64.c
-+ *   Ditto, for 64-bit MIPS CPUs.
-+ *
-+ * Zero and sign extension
-+ * ========================
-+ * 32-bit MIPS instructions on 64-bit MIPS registers use sign extension,
-+ * but the eBPF instruction set mandates zero extension. We let the verifier
-+ * insert explicit zero-extensions after 32-bit ALU operations, both for
-+ * 32-bit and 64-bit MIPS JITs. Conditional JMP32 operations on 64-bit MIPs
-+ * are JITed with sign extensions inserted when so expected.
-+ *
-+ * ALU operations
-+ * ==============
-+ * ALU operations on 32/64-bit MIPS and ALU64 operations on 64-bit MIPS are
-+ * JITed in the following steps. ALU64 operations on 32-bit MIPS are more
-+ * complicated and therefore only processed by special implementations in
-+ * step (3).
-+ *
-+ * 1) valid_alu_i:
-+ *    Determine if an immediate operation can be emitted as such, or if
-+ *    we must fall back to the register version.
-+ *
-+ * 2) rewrite_alu_i:
-+ *    Convert BPF operation and immediate value to a canonical form for
-+ *    JITing. In some degenerate cases this form may be a no-op.
-+ *
-+ * 3) emit_alu_{i,i64,r,64}:
-+ *    Emit instructions for an ALU or ALU64 immediate or register operation.
-+ *
-+ * JMP operations
-+ * ==============
-+ * JMP and JMP32 operations require an JIT instruction offset table for
-+ * translating the jump offset. This table is computed by dry-running the
-+ * JIT without actually emitting anything. However, the computed PC-relative
-+ * offset may overflow the 18-bit offset field width of the native MIPS
-+ * branch instruction. In such cases, the long jump is converted into the
-+ * following sequence.
-+ *
-+ *    <branch> !<cond> +2    Inverted PC-relative branch
-+ *    nop                    Delay slot
-+ *    j <offset>             Unconditional absolute long jump
-+ *    nop                    Delay slot
-+ *
-+ * Since this converted sequence alters the offset table, all offsets must
-+ * be re-calculated. This may in turn trigger new branch conversions, so
-+ * the process is repeated until no further changes are made. Normally it
-+ * completes in 1-2 iterations. If JIT_MAX_ITERATIONS should reached, we
-+ * fall back to converting every remaining jump operation. The branch
-+ * conversion is independent of how the JMP or JMP32 condition is JITed.
-+ *
-+ * JMP32 and JMP operations are JITed as follows.
-+ *
-+ * 1) setup_jmp_{i,r}:
-+ *    Convert jump conditional and offset into a form that can be JITed.
-+ *    This form may be a no-op, a canonical form, or an inverted PC-relative
-+ *    jump if branch conversion is necessary.
-+ *
-+ * 2) valid_jmp_i:
-+ *    Determine if an immediate operations can be emitted as such, or if
-+ *    we must fall back to the register version. Applies to JMP32 for 32-bit
-+ *    MIPS, and both JMP and JMP32 for 64-bit MIPS.
-+ *
-+ * 3) emit_jmp_{i,i64,r,r64}:
-+ *    Emit instructions for an JMP or JMP32 immediate or register operation.
-+ *
-+ * 4) finish_jmp_{i,r}:
-+ *    Emit any instructions needed to finish the jump. This includes a nop
-+ *    for the delay slot if a branch was emitted, and a long absolute jump
-+ *    if the branch was converted.
-+ */
-+
-+#include <linux/limits.h>
-+#include <linux/bitops.h>
-+#include <linux/errno.h>
-+#include <linux/filter.h>
-+#include <linux/bpf.h>
-+#include <linux/slab.h>
-+#include <asm/bitops.h>
-+#include <asm/cacheflush.h>
-+#include <asm/cpu-features.h>
-+#include <asm/isa-rev.h>
-+#include <asm/uasm.h>
-+
-+#include "bpf_jit_comp.h"
-+
-+/* Convenience macros for descriptor access */
-+#define CONVERTED(desc)	((desc) & JIT_DESC_CONVERT)
-+#define INDEX(desc)	((desc) & ~JIT_DESC_CONVERT)
-+
-+/*
-+ * Push registers on the stack, starting at a given depth from the stack
-+ * pointer and increasing. The next depth to be written is returned.
-+ */
-+int push_regs(struct jit_context *ctx, u32 mask, u32 excl, int depth)
-+{
-+	int reg;
-+
-+	for (reg = 0; reg < BITS_PER_BYTE * sizeof(mask); reg++)
-+		if (mask & BIT(reg)) {
-+			if ((excl & BIT(reg)) == 0) {
-+				if (sizeof(long) == 4)
-+					emit(ctx, sw, reg, depth, MIPS_R_SP);
-+				else /* sizeof(long) == 8 */
-+					emit(ctx, sd, reg, depth, MIPS_R_SP);
-+			}
-+			depth += sizeof(long);
-+		}
-+
-+	ctx->stack_used = max((int)ctx->stack_used, depth);
-+	return depth;
-+}
-+
-+/*
-+ * Pop registers from the stack, starting at a given depth from the stack
-+ * pointer and increasing. The next depth to be read is returned.
-+ */
-+int pop_regs(struct jit_context *ctx, u32 mask, u32 excl, int depth)
-+{
-+	int reg;
-+
-+	for (reg = 0; reg < BITS_PER_BYTE * sizeof(mask); reg++)
-+		if (mask & BIT(reg)) {
-+			if ((excl & BIT(reg)) == 0) {
-+				if (sizeof(long) == 4)
-+					emit(ctx, lw, reg, depth, MIPS_R_SP);
-+				else /* sizeof(long) == 8 */
-+					emit(ctx, ld, reg, depth, MIPS_R_SP);
-+			}
-+			depth += sizeof(long);
-+		}
-+
-+	return depth;
-+}
-+
-+/* Compute the 28-bit jump target address from a BPF program location */
-+int get_target(struct jit_context *ctx, u32 loc)
-+{
-+	u32 index = INDEX(ctx->descriptors[loc]);
-+	unsigned long pc = (unsigned long)&ctx->target[ctx->jit_index];
-+	unsigned long addr = (unsigned long)&ctx->target[index];
-+
-+	if (!ctx->target)
-+		return 0;
-+
-+	if ((addr ^ pc) & ~MIPS_JMP_MASK)
-+		return -1;
-+
-+	return addr & MIPS_JMP_MASK;
-+}
-+
-+/* Compute the PC-relative offset to relative BPF program offset */
-+int get_offset(const struct jit_context *ctx, int off)
-+{
-+	return (INDEX(ctx->descriptors[ctx->bpf_index + off]) -
-+		ctx->jit_index - 1) * sizeof(u32);
-+}
-+
-+/* dst = imm (register width) */
-+void emit_mov_i(struct jit_context *ctx, u8 dst, s32 imm)
-+{
-+	if (imm >= -0x8000 && imm <= 0x7fff) {
-+		emit(ctx, addiu, dst, MIPS_R_ZERO, imm);
-+	} else {
-+		emit(ctx, lui, dst, (s16)((u32)imm >> 16));
-+		emit(ctx, ori, dst, dst, (u16)(imm & 0xffff));
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* dst = src (register width) */
-+void emit_mov_r(struct jit_context *ctx, u8 dst, u8 src)
-+{
-+	emit(ctx, ori, dst, src, 0);
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Validate ALU immediate range */
-+bool valid_alu_i(u8 op, s32 imm)
-+{
-+	switch (BPF_OP(op)) {
-+	case BPF_NEG:
-+	case BPF_LSH:
-+	case BPF_RSH:
-+	case BPF_ARSH:
-+		/* All legal eBPF values are valid */
-+		return true;
-+	case BPF_ADD:
-+		/* imm must be 16 bits */
-+		return imm >= -0x8000 && imm <= 0x7fff;
-+	case BPF_SUB:
-+		/* -imm must be 16 bits */
-+		return imm >= -0x7fff && imm <= 0x8000;
-+	case BPF_AND:
-+	case BPF_OR:
-+	case BPF_XOR:
-+		/* imm must be 16 bits unsigned */
-+		return imm >= 0 && imm <= 0xffff;
-+	case BPF_MUL:
-+		/* imm must be zero or a positive power of two */
-+		return imm == 0 || (imm > 0 && is_power_of_2(imm));
-+	case BPF_DIV:
-+	case BPF_MOD:
-+		/* imm must be an 17-bit power of two */
-+		return (u32)imm <= 0x10000 && is_power_of_2((u32)imm);
-+	}
-+	return false;
-+}
-+
-+/* Rewrite ALU immediate operation */
-+bool rewrite_alu_i(u8 op, s32 imm, u8 *alu, s32 *val)
-+{
-+	bool act = true;
-+
-+	switch (BPF_OP(op)) {
-+	case BPF_LSH:
-+	case BPF_RSH:
-+	case BPF_ARSH:
-+	case BPF_ADD:
-+	case BPF_SUB:
-+	case BPF_OR:
-+	case BPF_XOR:
-+		/* imm == 0 is a no-op */
-+		act = imm != 0;
-+		break;
-+	case BPF_MUL:
-+		if (imm == 1) {
-+			/* dst * 1 is a no-op */
-+			act = false;
-+		} else if (imm == 0) {
-+			/* dst * 0 is dst & 0 */
-+			op = BPF_AND;
-+		} else {
-+			/* dst * (1 << n) is dst << n */
-+			op = BPF_LSH;
-+			imm = ilog2(abs(imm));
-+		}
-+		break;
-+	case BPF_DIV:
-+		if (imm == 1) {
-+			/* dst / 1 is a no-op */
-+			act = false;
-+		} else {
-+			/* dst / (1 << n) is dst >> n */
-+			op = BPF_RSH;
-+			imm = ilog2(imm);
-+		}
-+		break;
-+	case BPF_MOD:
-+		/* dst % (1 << n) is dst & ((1 << n) - 1) */
-+		op = BPF_AND;
-+		imm--;
-+		break;
-+	}
-+
-+	*alu = op;
-+	*val = imm;
-+	return act;
-+}
-+
-+/* ALU immediate operation (32-bit) */
-+void emit_alu_i(struct jit_context *ctx, u8 dst, s32 imm, u8 op)
-+{
-+	switch (BPF_OP(op)) {
-+	/* dst = -dst */
-+	case BPF_NEG:
-+		emit(ctx, subu, dst, MIPS_R_ZERO, dst);
-+		break;
-+	/* dst = dst & imm */
-+	case BPF_AND:
-+		emit(ctx, andi, dst, dst, (u16)imm);
-+		break;
-+	/* dst = dst | imm */
-+	case BPF_OR:
-+		emit(ctx, ori, dst, dst, (u16)imm);
-+		break;
-+	/* dst = dst ^ imm */
-+	case BPF_XOR:
-+		emit(ctx, xori, dst, dst, (u16)imm);
-+		break;
-+	/* dst = dst << imm */
-+	case BPF_LSH:
-+		emit(ctx, sll, dst, dst, imm);
-+		break;
-+	/* dst = dst >> imm */
-+	case BPF_RSH:
-+		emit(ctx, srl, dst, dst, imm);
-+		break;
-+	/* dst = dst >> imm (arithmetic) */
-+	case BPF_ARSH:
-+		emit(ctx, sra, dst, dst, imm);
-+		break;
-+	/* dst = dst + imm */
-+	case BPF_ADD:
-+		emit(ctx, addiu, dst, dst, imm);
-+		break;
-+	/* dst = dst - imm */
-+	case BPF_SUB:
-+		emit(ctx, addiu, dst, dst, -imm);
-+		break;
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* ALU register operation (32-bit) */
-+void emit_alu_r(struct jit_context *ctx, u8 dst, u8 src, u8 op)
-+{
-+	switch (BPF_OP(op)) {
-+	/* dst = dst & src */
-+	case BPF_AND:
-+		emit(ctx, and, dst, dst, src);
-+		break;
-+	/* dst = dst | src */
-+	case BPF_OR:
-+		emit(ctx, or, dst, dst, src);
-+		break;
-+	/* dst = dst ^ src */
-+	case BPF_XOR:
-+		emit(ctx, xor, dst, dst, src);
-+		break;
-+	/* dst = dst << src */
-+	case BPF_LSH:
-+		emit(ctx, sllv, dst, dst, src);
-+		break;
-+	/* dst = dst >> src */
-+	case BPF_RSH:
-+		emit(ctx, srlv, dst, dst, src);
-+		break;
-+	/* dst = dst >> src (arithmetic) */
-+	case BPF_ARSH:
-+		emit(ctx, srav, dst, dst, src);
-+		break;
-+	/* dst = dst + src */
-+	case BPF_ADD:
-+		emit(ctx, addu, dst, dst, src);
-+		break;
-+	/* dst = dst - src */
-+	case BPF_SUB:
-+		emit(ctx, subu, dst, dst, src);
-+		break;
-+	/* dst = dst * src */
-+	case BPF_MUL:
-+		if (cpu_has_mips32r1 || cpu_has_mips32r6) {
-+			emit(ctx, mul, dst, dst, src);
-+		} else {
-+			emit(ctx, multu, dst, src);
-+			emit(ctx, mflo, dst);
-+		}
-+		break;
-+	/* dst = dst / src */
-+	case BPF_DIV:
-+		if (cpu_has_mips32r6) {
-+			emit(ctx, divu_r6, dst, dst, src);
-+		} else {
-+			emit(ctx, divu, dst, src);
-+			emit(ctx, mflo, dst);
-+		}
-+		break;
-+	/* dst = dst % src */
-+	case BPF_MOD:
-+		if (cpu_has_mips32r6) {
-+			emit(ctx, modu, dst, dst, src);
-+		} else {
-+			emit(ctx, divu, dst, src);
-+			emit(ctx, mfhi, dst);
-+		}
-+		break;
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Atomic read-modify-write (32-bit) */
-+void emit_atomic_r(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 code)
-+{
-+	emit(ctx, ll, MIPS_R_T9, off, dst);
-+	switch (code) {
-+	case BPF_ADD:
-+		emit(ctx, addu, MIPS_R_T8, MIPS_R_T9, src);
-+		break;
-+	case BPF_AND:
-+		emit(ctx, and, MIPS_R_T8, MIPS_R_T9, src);
-+		break;
-+	case BPF_OR:
-+		emit(ctx, or, MIPS_R_T8, MIPS_R_T9, src);
-+		break;
-+	case BPF_XOR:
-+		emit(ctx, xor, MIPS_R_T8, MIPS_R_T9, src);
-+		break;
-+	}
-+	emit(ctx, sc, MIPS_R_T8, off, dst);
-+	emit(ctx, beqz, MIPS_R_T8, -16);
-+	emit(ctx, nop); /* Delay slot */
-+}
-+
-+/* Atomic compare-and-exchange (32-bit) */
-+void emit_cmpxchg_r(struct jit_context *ctx, u8 dst, u8 src, u8 res, s16 off)
-+{
-+	emit(ctx, ll, MIPS_R_T9, off, dst);
-+	emit(ctx, bne, MIPS_R_T9, res, 12);
-+	emit(ctx, move, MIPS_R_T8, src);     /* Delay slot */
-+	emit(ctx, sc, MIPS_R_T8, off, dst);
-+	emit(ctx, beqz, MIPS_R_T8, -20);
-+	emit(ctx, move, res, MIPS_R_T9);     /* Delay slot */
-+	clobber_reg(ctx, res);
-+}
-+
-+/* Swap bytes and truncate a register word or half word */
-+void emit_bswap_r(struct jit_context *ctx, u8 dst, u32 width)
-+{
-+	u8 tmp = MIPS_R_T8;
-+	u8 msk = MIPS_R_T9;
-+
-+	switch (width) {
-+	/* Swap bytes in a word */
-+	case 32:
-+		if (cpu_has_mips32r2 || cpu_has_mips32r6) {
-+			emit(ctx, wsbh, dst, dst);
-+			emit(ctx, rotr, dst, dst, 16);
-+		} else {
-+			emit(ctx, sll, tmp, dst, 16);    /* tmp  = dst << 16 */
-+			emit(ctx, srl, dst, dst, 16);    /* dst = dst >> 16  */
-+			emit(ctx, or, dst, dst, tmp);    /* dst = dst | tmp  */
-+
-+			emit(ctx, lui, msk, 0xff);       /* msk = 0x00ff0000 */
-+			emit(ctx, ori, msk, msk, 0xff);  /* msk = msk | 0xff */
-+
-+			emit(ctx, and, tmp, dst, msk);   /* tmp = dst & msk  */
-+			emit(ctx, sll, tmp, tmp, 8);     /* tmp = tmp << 8   */
-+			emit(ctx, srl, dst, dst, 8);     /* dst = dst >> 8   */
-+			emit(ctx, and, dst, dst, msk);   /* dst = dst & msk  */
-+			emit(ctx, or, dst, dst, tmp);    /* reg = dst | tmp  */
-+		}
-+		break;
-+	/* Swap bytes in a half word */
-+	case 16:
-+		if (cpu_has_mips32r2 || cpu_has_mips32r6) {
-+			emit(ctx, wsbh, dst, dst);
-+			emit(ctx, andi, dst, dst, 0xffff);
-+		} else {
-+			emit(ctx, andi, tmp, dst, 0xff00); /* t = d & 0xff00 */
-+			emit(ctx, srl, tmp, tmp, 8);       /* t = t >> 8     */
-+			emit(ctx, andi, dst, dst, 0x00ff); /* d = d & 0x00ff */
-+			emit(ctx, sll, dst, dst, 8);       /* d = d << 8     */
-+			emit(ctx, or,  dst, dst, tmp);     /* d = d | t      */
-+		}
-+		break;
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Validate jump immediate range */
-+bool valid_jmp_i(u8 op, s32 imm)
-+{
-+	switch (op) {
-+	case JIT_JNOP:
-+		/* Immediate value not used */
-+		return true;
-+	case BPF_JEQ:
-+	case BPF_JNE:
-+		/* No immediate operation */
-+		return false;
-+	case BPF_JSET:
-+	case JIT_JNSET:
-+		/* imm must be 16 bits unsigned */
-+		return imm >= 0 && imm <= 0xffff;
-+	case BPF_JGE:
-+	case BPF_JLT:
-+	case BPF_JSGE:
-+	case BPF_JSLT:
-+		/* imm must be 16 bits */
-+		return imm >= -0x8000 && imm <= 0x7fff;
-+	case BPF_JGT:
-+	case BPF_JLE:
-+	case BPF_JSGT:
-+	case BPF_JSLE:
-+		/* imm + 1 must be 16 bits */
-+		return imm >= -0x8001 && imm <= 0x7ffe;
-+	}
-+	return false;
-+}
-+
-+/* Invert a conditional jump operation */
-+static u8 invert_jmp(u8 op)
-+{
-+	switch (op) {
-+	case BPF_JA: return JIT_JNOP;
-+	case BPF_JEQ: return BPF_JNE;
-+	case BPF_JNE: return BPF_JEQ;
-+	case BPF_JSET: return JIT_JNSET;
-+	case BPF_JGT: return BPF_JLE;
-+	case BPF_JGE: return BPF_JLT;
-+	case BPF_JLT: return BPF_JGE;
-+	case BPF_JLE: return BPF_JGT;
-+	case BPF_JSGT: return BPF_JSLE;
-+	case BPF_JSGE: return BPF_JSLT;
-+	case BPF_JSLT: return BPF_JSGE;
-+	case BPF_JSLE: return BPF_JSGT;
-+	}
-+	return 0;
-+}
-+
-+/* Prepare a PC-relative jump operation */
-+static void setup_jmp(struct jit_context *ctx, u8 bpf_op,
-+		      s16 bpf_off, u8 *jit_op, s32 *jit_off)
-+{
-+	u32 *descp = &ctx->descriptors[ctx->bpf_index];
-+	int op = bpf_op;
-+	int offset = 0;
-+
-+	/* Do not compute offsets on the first pass */
-+	if (INDEX(*descp) == 0)
-+		goto done;
-+
-+	/* Skip jumps never taken */
-+	if (bpf_op == JIT_JNOP)
-+		goto done;
-+
-+	/* Convert jumps always taken */
-+	if (bpf_op == BPF_JA)
-+		*descp |= JIT_DESC_CONVERT;
-+
-+	/*
-+	 * Current ctx->jit_index points to the start of the branch preamble.
-+	 * Since the preamble differs among different branch conditionals,
-+	 * the current index cannot be used to compute the branch offset.
-+	 * Instead, we use the offset table value for the next instruction,
-+	 * which gives the index immediately after the branch delay slot.
-+	 */
-+	if (!CONVERTED(*descp)) {
-+		int target = ctx->bpf_index + bpf_off + 1;
-+		int origin = ctx->bpf_index + 1;
-+
-+		offset = (INDEX(ctx->descriptors[target]) -
-+			  INDEX(ctx->descriptors[origin]) + 1) * sizeof(u32);
-+	}
-+
-+	/*
-+	 * The PC-relative branch offset field on MIPS is 18 bits signed,
-+	 * so if the computed offset is larger than this we generate a an
-+	 * absolute jump that we skip with an inverted conditional branch.
-+	 */
-+	if (CONVERTED(*descp) || offset < -0x20000 || offset > 0x1ffff) {
-+		offset = 3 * sizeof(u32);
-+		op = invert_jmp(bpf_op);
-+		ctx->changes += !CONVERTED(*descp);
-+		*descp |= JIT_DESC_CONVERT;
-+	}
-+
-+done:
-+	*jit_off = offset;
-+	*jit_op = op;
-+}
-+
-+/* Prepare a PC-relative jump operation with immediate conditional */
-+void setup_jmp_i(struct jit_context *ctx, s32 imm, u8 width,
-+		 u8 bpf_op, s16 bpf_off, u8 *jit_op, s32 *jit_off)
-+{
-+	bool always = false;
-+	bool never = false;
-+
-+	switch (bpf_op) {
-+	case BPF_JEQ:
-+	case BPF_JNE:
-+		break;
-+	case BPF_JSET:
-+	case BPF_JLT:
-+		never = imm == 0;
-+		break;
-+	case BPF_JGE:
-+		always = imm == 0;
-+		break;
-+	case BPF_JGT:
-+		never = (u32)imm == U32_MAX;
-+		break;
-+	case BPF_JLE:
-+		always = (u32)imm == U32_MAX;
-+		break;
-+	case BPF_JSGT:
-+		never = imm == S32_MAX && width == 32;
-+		break;
-+	case BPF_JSGE:
-+		always = imm == S32_MIN && width == 32;
-+		break;
-+	case BPF_JSLT:
-+		never = imm == S32_MIN && width == 32;
-+		break;
-+	case BPF_JSLE:
-+		always = imm == S32_MAX && width == 32;
-+		break;
-+	}
-+
-+	if (never)
-+		bpf_op = JIT_JNOP;
-+	if (always)
-+		bpf_op = BPF_JA;
-+	setup_jmp(ctx, bpf_op, bpf_off, jit_op, jit_off);
-+}
-+
-+/* Prepare a PC-relative jump operation with register conditional */
-+void setup_jmp_r(struct jit_context *ctx, bool same_reg,
-+		 u8 bpf_op, s16 bpf_off, u8 *jit_op, s32 *jit_off)
-+{
-+	switch (bpf_op) {
-+	case BPF_JSET:
-+		break;
-+	case BPF_JEQ:
-+	case BPF_JGE:
-+	case BPF_JLE:
-+	case BPF_JSGE:
-+	case BPF_JSLE:
-+		if (same_reg)
-+			bpf_op = BPF_JA;
-+		break;
-+	case BPF_JNE:
-+	case BPF_JLT:
-+	case BPF_JGT:
-+	case BPF_JSGT:
-+	case BPF_JSLT:
-+		if (same_reg)
-+			bpf_op = JIT_JNOP;
-+		break;
-+	}
-+	setup_jmp(ctx, bpf_op, bpf_off, jit_op, jit_off);
-+}
-+
-+/* Finish a PC-relative jump operation */
-+int finish_jmp(struct jit_context *ctx, u8 jit_op, s16 bpf_off)
-+{
-+	/* Emit conditional branch delay slot */
-+	if (jit_op != JIT_JNOP)
-+		emit(ctx, nop);
-+	/*
-+	 * Emit an absolute long jump with delay slot,
-+	 * if the PC-relative branch was converted.
-+	 */
-+	if (CONVERTED(ctx->descriptors[ctx->bpf_index])) {
-+		int target = get_target(ctx, ctx->bpf_index + bpf_off + 1);
-+
-+		if (target < 0)
-+			return -1;
-+		emit(ctx, j, target);
-+		emit(ctx, nop);
-+	}
-+	return 0;
-+}
-+
-+/* Jump immediate (32-bit) */
-+void emit_jmp_i(struct jit_context *ctx, u8 dst, s32 imm, s32 off, u8 op)
-+{
-+	switch (op) {
-+	/* No-op, used internally for branch optimization */
-+	case JIT_JNOP:
-+		break;
-+	/* PC += off if dst & imm */
-+	case BPF_JSET:
-+		emit(ctx, andi, MIPS_R_T9, dst, (u16)imm);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if (dst & imm) == 0 (not in BPF, used for long jumps) */
-+	case JIT_JNSET:
-+		emit(ctx, andi, MIPS_R_T9, dst, (u16)imm);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst > imm */
-+	case BPF_JGT:
-+		emit(ctx, sltiu, MIPS_R_T9, dst, imm + 1);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst >= imm */
-+	case BPF_JGE:
-+		emit(ctx, sltiu, MIPS_R_T9, dst, imm);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst < imm */
-+	case BPF_JLT:
-+		emit(ctx, sltiu, MIPS_R_T9, dst, imm);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst <= imm */
-+	case BPF_JLE:
-+		emit(ctx, sltiu, MIPS_R_T9, dst, imm + 1);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst > imm (signed) */
-+	case BPF_JSGT:
-+		emit(ctx, slti, MIPS_R_T9, dst, imm + 1);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst >= imm (signed) */
-+	case BPF_JSGE:
-+		emit(ctx, slti, MIPS_R_T9, dst, imm);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst < imm (signed) */
-+	case BPF_JSLT:
-+		emit(ctx, slti, MIPS_R_T9, dst, imm);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst <= imm (signed) */
-+	case BPF_JSLE:
-+		emit(ctx, slti, MIPS_R_T9, dst, imm + 1);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	}
-+}
-+
-+/* Jump register (32-bit) */
-+void emit_jmp_r(struct jit_context *ctx, u8 dst, u8 src, s32 off, u8 op)
-+{
-+	switch (op) {
-+	/* No-op, used internally for branch optimization */
-+	case JIT_JNOP:
-+		break;
-+	/* PC += off if dst == src */
-+	case BPF_JEQ:
-+		emit(ctx, beq, dst, src, off);
-+		break;
-+	/* PC += off if dst != src */
-+	case BPF_JNE:
-+		emit(ctx, bne, dst, src, off);
-+		break;
-+	/* PC += off if dst & src */
-+	case BPF_JSET:
-+		emit(ctx, and, MIPS_R_T9, dst, src);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if (dst & imm) == 0 (not in BPF, used for long jumps) */
-+	case JIT_JNSET:
-+		emit(ctx, and, MIPS_R_T9, dst, src);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst > src */
-+	case BPF_JGT:
-+		emit(ctx, sltu, MIPS_R_T9, src, dst);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst >= src */
-+	case BPF_JGE:
-+		emit(ctx, sltu, MIPS_R_T9, dst, src);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst < src */
-+	case BPF_JLT:
-+		emit(ctx, sltu, MIPS_R_T9, dst, src);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst <= src */
-+	case BPF_JLE:
-+		emit(ctx, sltu, MIPS_R_T9, src, dst);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst > src (signed) */
-+	case BPF_JSGT:
-+		emit(ctx, slt, MIPS_R_T9, src, dst);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst >= src (signed) */
-+	case BPF_JSGE:
-+		emit(ctx, slt, MIPS_R_T9, dst, src);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst < src (signed) */
-+	case BPF_JSLT:
-+		emit(ctx, slt, MIPS_R_T9, dst, src);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst <= src (signed) */
-+	case BPF_JSLE:
-+		emit(ctx, slt, MIPS_R_T9, src, dst);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	}
-+}
-+
-+/* Jump always */
-+int emit_ja(struct jit_context *ctx, s16 off)
-+{
-+	int target = get_target(ctx, ctx->bpf_index + off + 1);
-+
-+	if (target < 0)
-+		return -1;
-+	emit(ctx, j, target);
-+	emit(ctx, nop);
-+	return 0;
-+}
-+
-+/* Jump to epilogue */
-+int emit_exit(struct jit_context *ctx)
-+{
-+	int target = get_target(ctx, ctx->program->len);
-+
-+	if (target < 0)
-+		return -1;
-+	emit(ctx, j, target);
-+	emit(ctx, nop);
-+	return 0;
-+}
-+
-+/* Build the program body from eBPF bytecode */
-+static int build_body(struct jit_context *ctx)
-+{
-+	const struct bpf_prog *prog = ctx->program;
-+	unsigned int i;
-+
-+	ctx->stack_used = 0;
-+	for (i = 0; i < prog->len; i++) {
-+		const struct bpf_insn *insn = &prog->insnsi[i];
-+		u32 *descp = &ctx->descriptors[i];
-+		int ret;
-+
-+		access_reg(ctx, insn->src_reg);
-+		access_reg(ctx, insn->dst_reg);
-+
-+		ctx->bpf_index = i;
-+		if (ctx->target == NULL) {
-+			ctx->changes += INDEX(*descp) != ctx->jit_index;
-+			*descp &= JIT_DESC_CONVERT;
-+			*descp |= ctx->jit_index;
-+		}
-+
-+		ret = build_insn(insn, ctx);
-+		if (ret < 0)
-+			return ret;
-+
-+		if (ret > 0) {
-+			i++;
-+			if (ctx->target == NULL)
-+				descp[1] = ctx->jit_index;
-+		}
-+	}
-+
-+	/* Store the end offset, where the epilogue begins */
-+	ctx->descriptors[prog->len] = ctx->jit_index;
-+	return 0;
-+}
-+
-+/* Set the branch conversion flag on all instructions */
-+static void set_convert_flag(struct jit_context *ctx, bool enable)
-+{
-+	const struct bpf_prog *prog = ctx->program;
-+	u32 flag = enable ? JIT_DESC_CONVERT : 0;
-+	unsigned int i;
-+
-+	for (i = 0; i <= prog->len; i++)
-+		ctx->descriptors[i] = INDEX(ctx->descriptors[i]) | flag;
-+}
-+
-+static void jit_fill_hole(void *area, unsigned int size)
-+{
-+	u32 *p;
-+
-+	/* We are guaranteed to have aligned memory. */
-+	for (p = area; size >= sizeof(u32); size -= sizeof(u32))
-+		uasm_i_break(&p, BRK_BUG); /* Increments p */
-+}
-+
-+bool bpf_jit_needs_zext(void)
-+{
-+	return true;
-+}
-+
-+struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
-+{
-+	struct bpf_prog *tmp, *orig_prog = prog;
-+	struct bpf_binary_header *header = NULL;
-+	struct jit_context ctx;
-+	bool tmp_blinded = false;
-+	unsigned int tmp_idx;
-+	unsigned int image_size;
-+	u8 *image_ptr;
-+	int tries;
-+
-+	/*
-+	 * If BPF JIT was not enabled then we must fall back to
-+	 * the interpreter.
-+	 */
-+	if (!prog->jit_requested)
-+		return orig_prog;
-+	/*
-+	 * If constant blinding was enabled and we failed during blinding
-+	 * then we must fall back to the interpreter. Otherwise, we save
-+	 * the new JITed code.
-+	 */
-+	tmp = bpf_jit_blind_constants(prog);
-+	if (IS_ERR(tmp))
-+		return orig_prog;
-+	if (tmp != prog) {
-+		tmp_blinded = true;
-+		prog = tmp;
-+	}
-+
-+	memset(&ctx, 0, sizeof(ctx));
-+	ctx.program = prog;
-+
-+	/*
-+	 * Not able to allocate memory for descriptors[], then
-+	 * we must fall back to the interpreter
-+	 */
-+	ctx.descriptors = kcalloc(prog->len + 1, sizeof(*ctx.descriptors),
-+				  GFP_KERNEL);
-+	if (ctx.descriptors == NULL)
-+		goto out_err;
-+
-+	/* First pass discovers used resources */
-+	if (build_body(&ctx) < 0)
-+		goto out_err;
-+	/*
-+	 * Second pass computes instruction offsets.
-+	 * If any PC-relative branches are out of range, a sequence of
-+	 * a PC-relative branch + a jump is generated, and we have to
-+	 * try again from the beginning to generate the new offsets.
-+	 * This is done until no additional conversions are necessary.
-+	 * The last two iterations are done with all branches being
-+	 * converted, to guarantee offset table convergence within a
-+	 * fixed number of iterations.
-+	 */
-+	ctx.jit_index = 0;
-+	build_prologue(&ctx);
-+	tmp_idx = ctx.jit_index;
-+
-+	tries = JIT_MAX_ITERATIONS;
-+	do {
-+		ctx.jit_index = tmp_idx;
-+		ctx.changes = 0;
-+		if (tries == 2)
-+			set_convert_flag(&ctx, true);
-+		if (build_body(&ctx) < 0)
-+			goto out_err;
-+	} while (ctx.changes > 0 && --tries > 0);
-+
-+	if (WARN_ONCE(ctx.changes > 0, "JIT offsets failed to converge"))
-+		goto out_err;
-+
-+	build_epilogue(&ctx, MIPS_R_RA);
-+
-+	/* Now we know the size of the structure to make */
-+	image_size = sizeof(u32) * ctx.jit_index;
-+	header = bpf_jit_binary_alloc(image_size, &image_ptr,
-+				      sizeof(u32), jit_fill_hole);
-+	/*
-+	 * Not able to allocate memory for the structure then
-+	 * we must fall back to the interpretation
-+	 */
-+	if (header == NULL)
-+		goto out_err;
-+
-+	/* Actual pass to generate final JIT code */
-+	ctx.target = (u32 *)image_ptr;
-+	ctx.jit_index = 0;
-+
-+	/*
-+	 * If building the JITed code fails somehow,
-+	 * we fall back to the interpretation.
-+	 */
-+	build_prologue(&ctx);
-+	if (build_body(&ctx) < 0)
-+		goto out_err;
-+	build_epilogue(&ctx, MIPS_R_RA);
-+
-+	/* Populate line info meta data */
-+	set_convert_flag(&ctx, false);
-+	bpf_prog_fill_jited_linfo(prog, &ctx.descriptors[1]);
-+
-+	/* Set as read-only exec and flush instruction cache */
-+	bpf_jit_binary_lock_ro(header);
-+	flush_icache_range((unsigned long)header,
-+			   (unsigned long)&ctx.target[ctx.jit_index]);
-+
-+	if (bpf_jit_enable > 1)
-+		bpf_jit_dump(prog->len, image_size, 2, ctx.target);
-+
-+	prog->bpf_func = (void *)ctx.target;
-+	prog->jited = 1;
-+	prog->jited_len = image_size;
-+
-+out:
-+	if (tmp_blinded)
-+		bpf_jit_prog_release_other(prog, prog == orig_prog ?
-+					   tmp : orig_prog);
-+	kfree(ctx.descriptors);
-+	return prog;
-+
-+out_err:
-+	prog = orig_prog;
-+	if (header)
-+		bpf_jit_binary_free(header);
-+	goto out;
-+}
---- /dev/null
-+++ b/arch/mips/net/bpf_jit_comp.h
-@@ -0,0 +1,211 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+/*
-+ * Just-In-Time compiler for eBPF bytecode on 32-bit and 64-bit MIPS.
-+ *
-+ * Copyright (c) 2021 Anyfi Networks AB.
-+ * Author: Johan Almbladh <johan.almbladh@gmail.com>
-+ *
-+ * Based on code and ideas from
-+ * Copyright (c) 2017 Cavium, Inc.
-+ * Copyright (c) 2017 Shubham Bansal <illusionist.neo@gmail.com>
-+ * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com>
-+ */
-+
-+#ifndef _BPF_JIT_COMP_H
-+#define _BPF_JIT_COMP_H
-+
-+/* MIPS registers */
-+#define MIPS_R_ZERO	0   /* Const zero */
-+#define MIPS_R_AT	1   /* Asm temp   */
-+#define MIPS_R_V0	2   /* Result     */
-+#define MIPS_R_V1	3   /* Result     */
-+#define MIPS_R_A0	4   /* Argument   */
-+#define MIPS_R_A1	5   /* Argument   */
-+#define MIPS_R_A2	6   /* Argument   */
-+#define MIPS_R_A3	7   /* Argument   */
-+#define MIPS_R_A4	8   /* Arg (n64)  */
-+#define MIPS_R_A5	9   /* Arg (n64)  */
-+#define MIPS_R_A6	10  /* Arg (n64)  */
-+#define MIPS_R_A7	11  /* Arg (n64)  */
-+#define MIPS_R_T0	8   /* Temp (o32) */
-+#define MIPS_R_T1	9   /* Temp (o32) */
-+#define MIPS_R_T2	10  /* Temp (o32) */
-+#define MIPS_R_T3	11  /* Temp (o32) */
-+#define MIPS_R_T4	12  /* Temporary  */
-+#define MIPS_R_T5	13  /* Temporary  */
-+#define MIPS_R_T6	14  /* Temporary  */
-+#define MIPS_R_T7	15  /* Temporary  */
-+#define MIPS_R_S0	16  /* Saved      */
-+#define MIPS_R_S1	17  /* Saved      */
-+#define MIPS_R_S2	18  /* Saved      */
-+#define MIPS_R_S3	19  /* Saved      */
-+#define MIPS_R_S4	20  /* Saved      */
-+#define MIPS_R_S5	21  /* Saved      */
-+#define MIPS_R_S6	22  /* Saved      */
-+#define MIPS_R_S7	23  /* Saved      */
-+#define MIPS_R_T8	24  /* Temporary  */
-+#define MIPS_R_T9	25  /* Temporary  */
-+/*      MIPS_R_K0	26     Reserved   */
-+/*      MIPS_R_K1	27     Reserved   */
-+#define MIPS_R_GP	28  /* Global ptr */
-+#define MIPS_R_SP	29  /* Stack ptr  */
-+#define MIPS_R_FP	30  /* Frame ptr  */
-+#define MIPS_R_RA	31  /* Return     */
-+
-+/*
-+ * Jump address mask for immediate jumps. The four most significant bits
-+ * must be equal to PC.
-+ */
-+#define MIPS_JMP_MASK	0x0fffffffUL
-+
-+/* Maximum number of iterations in offset table computation */
-+#define JIT_MAX_ITERATIONS	8
-+
-+/*
-+ * Jump pseudo-instructions used internally
-+ * for branch conversion and branch optimization.
-+ */
-+#define JIT_JNSET	0xe0
-+#define JIT_JNOP	0xf0
-+
-+/* Descriptor flag for PC-relative branch conversion */
-+#define JIT_DESC_CONVERT	BIT(31)
-+
-+/* JIT context for an eBPF program */
-+struct jit_context {
-+	struct bpf_prog *program;     /* The eBPF program being JITed        */
-+	u32 *descriptors;             /* eBPF to JITed CPU insn descriptors  */
-+	u32 *target;                  /* JITed code buffer                   */
-+	u32 bpf_index;                /* Index of current BPF program insn   */
-+	u32 jit_index;                /* Index of current JIT target insn    */
-+	u32 changes;                  /* Number of PC-relative branch conv   */
-+	u32 accessed;                 /* Bit mask of read eBPF registers     */
-+	u32 clobbered;                /* Bit mask of modified CPU registers  */
-+	u32 stack_size;               /* Total allocated stack size in bytes */
-+	u32 saved_size;               /* Size of callee-saved registers      */
-+	u32 stack_used;               /* Stack size used for function calls  */
-+};
-+
-+/* Emit the instruction if the JIT memory space has been allocated */
-+#define emit(ctx, func, ...)					\
-+do {								\
-+	if ((ctx)->target != NULL) {				\
-+		u32 *p = &(ctx)->target[ctx->jit_index];	\
-+		uasm_i_##func(&p, ##__VA_ARGS__);		\
-+	}							\
-+	(ctx)->jit_index++;					\
-+} while (0)
-+
-+/*
-+ * Mark a BPF register as accessed, it needs to be
-+ * initialized by the program if expected, e.g. FP.
-+ */
-+static inline void access_reg(struct jit_context *ctx, u8 reg)
-+{
-+	ctx->accessed |= BIT(reg);
-+}
-+
-+/*
-+ * Mark a CPU register as clobbered, it needs to be
-+ * saved/restored by the program if callee-saved.
-+ */
-+static inline void clobber_reg(struct jit_context *ctx, u8 reg)
-+{
-+	ctx->clobbered |= BIT(reg);
-+}
-+
-+/*
-+ * Push registers on the stack, starting at a given depth from the stack
-+ * pointer and increasing. The next depth to be written is returned.
-+ */
-+int push_regs(struct jit_context *ctx, u32 mask, u32 excl, int depth);
-+
-+/*
-+ * Pop registers from the stack, starting at a given depth from the stack
-+ * pointer and increasing. The next depth to be read is returned.
-+ */
-+int pop_regs(struct jit_context *ctx, u32 mask, u32 excl, int depth);
-+
-+/* Compute the 28-bit jump target address from a BPF program location */
-+int get_target(struct jit_context *ctx, u32 loc);
-+
-+/* Compute the PC-relative offset to relative BPF program offset */
-+int get_offset(const struct jit_context *ctx, int off);
-+
-+/* dst = imm (32-bit) */
-+void emit_mov_i(struct jit_context *ctx, u8 dst, s32 imm);
-+
-+/* dst = src (32-bit) */
-+void emit_mov_r(struct jit_context *ctx, u8 dst, u8 src);
-+
-+/* Validate ALU/ALU64 immediate range */
-+bool valid_alu_i(u8 op, s32 imm);
-+
-+/* Rewrite ALU/ALU64 immediate operation */
-+bool rewrite_alu_i(u8 op, s32 imm, u8 *alu, s32 *val);
-+
-+/* ALU immediate operation (32-bit) */
-+void emit_alu_i(struct jit_context *ctx, u8 dst, s32 imm, u8 op);
-+
-+/* ALU register operation (32-bit) */
-+void emit_alu_r(struct jit_context *ctx, u8 dst, u8 src, u8 op);
-+
-+/* Atomic read-modify-write (32-bit) */
-+void emit_atomic_r(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 code);
-+
-+/* Atomic compare-and-exchange (32-bit) */
-+void emit_cmpxchg_r(struct jit_context *ctx, u8 dst, u8 src, u8 res, s16 off);
-+
-+/* Swap bytes and truncate a register word or half word */
-+void emit_bswap_r(struct jit_context *ctx, u8 dst, u32 width);
-+
-+/* Validate JMP/JMP32 immediate range */
-+bool valid_jmp_i(u8 op, s32 imm);
-+
-+/* Prepare a PC-relative jump operation with immediate conditional */
-+void setup_jmp_i(struct jit_context *ctx, s32 imm, u8 width,
-+		 u8 bpf_op, s16 bpf_off, u8 *jit_op, s32 *jit_off);
-+
-+/* Prepare a PC-relative jump operation with register conditional */
-+void setup_jmp_r(struct jit_context *ctx, bool same_reg,
-+		 u8 bpf_op, s16 bpf_off, u8 *jit_op, s32 *jit_off);
-+
-+/* Finish a PC-relative jump operation */
-+int finish_jmp(struct jit_context *ctx, u8 jit_op, s16 bpf_off);
-+
-+/* Conditional JMP/JMP32 immediate */
-+void emit_jmp_i(struct jit_context *ctx, u8 dst, s32 imm, s32 off, u8 op);
-+
-+/* Conditional JMP/JMP32 register */
-+void emit_jmp_r(struct jit_context *ctx, u8 dst, u8 src, s32 off, u8 op);
-+
-+/* Jump always */
-+int emit_ja(struct jit_context *ctx, s16 off);
-+
-+/* Jump to epilogue */
-+int emit_exit(struct jit_context *ctx);
-+
-+/*
-+ * Build program prologue to set up the stack and registers.
-+ * This function is implemented separately for 32-bit and 64-bit JITs.
-+ */
-+void build_prologue(struct jit_context *ctx);
-+
-+/*
-+ * Build the program epilogue to restore the stack and registers.
-+ * This function is implemented separately for 32-bit and 64-bit JITs.
-+ */
-+void build_epilogue(struct jit_context *ctx, int dest_reg);
-+
-+/*
-+ * Convert an eBPF instruction to native instruction, i.e
-+ * JITs an eBPF instruction.
-+ * Returns :
-+ *	0  - Successfully JITed an 8-byte eBPF instruction
-+ *	>0 - Successfully JITed a 16-byte eBPF instruction
-+ *	<0 - Failed to JIT.
-+ * This function is implemented separately for 32-bit and 64-bit JITs.
-+ */
-+int build_insn(const struct bpf_insn *insn, struct jit_context *ctx);
-+
-+#endif /* _BPF_JIT_COMP_H */
---- /dev/null
-+++ b/arch/mips/net/bpf_jit_comp32.c
-@@ -0,0 +1,1741 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Just-In-Time compiler for eBPF bytecode on MIPS.
-+ * Implementation of JIT functions for 32-bit CPUs.
-+ *
-+ * Copyright (c) 2021 Anyfi Networks AB.
-+ * Author: Johan Almbladh <johan.almbladh@gmail.com>
-+ *
-+ * Based on code and ideas from
-+ * Copyright (c) 2017 Cavium, Inc.
-+ * Copyright (c) 2017 Shubham Bansal <illusionist.neo@gmail.com>
-+ * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com>
-+ */
-+
-+#include <linux/math64.h>
-+#include <linux/errno.h>
-+#include <linux/filter.h>
-+#include <linux/bpf.h>
-+#include <asm/cpu-features.h>
-+#include <asm/isa-rev.h>
-+#include <asm/uasm.h>
-+
-+#include "bpf_jit_comp.h"
-+
-+/* MIPS a4-a7 are not available in the o32 ABI */
-+#undef MIPS_R_A4
-+#undef MIPS_R_A5
-+#undef MIPS_R_A6
-+#undef MIPS_R_A7
-+
-+/* Stack is 8-byte aligned in o32 ABI */
-+#define MIPS_STACK_ALIGNMENT 8
-+
-+/*
-+ * The top 16 bytes of a stack frame is reserved for the callee in O32 ABI.
-+ * This corresponds to stack space for register arguments a0-a3.
-+ */
-+#define JIT_RESERVED_STACK 16
-+
-+/* Temporary 64-bit register used by JIT */
-+#define JIT_REG_TMP MAX_BPF_JIT_REG
-+
-+/*
-+ * Number of prologue bytes to skip when doing a tail call.
-+ * Tail call count (TCC) initialization (8 bytes) always, plus
-+ * R0-to-v0 assignment (4 bytes) if big endian.
-+ */
-+#ifdef __BIG_ENDIAN
-+#define JIT_TCALL_SKIP 12
-+#else
-+#define JIT_TCALL_SKIP 8
-+#endif
-+
-+/* CPU registers holding the callee return value */
-+#define JIT_RETURN_REGS	  \
-+	(BIT(MIPS_R_V0) | \
-+	 BIT(MIPS_R_V1))
-+
-+/* CPU registers arguments passed to callee directly */
-+#define JIT_ARG_REGS      \
-+	(BIT(MIPS_R_A0) | \
-+	 BIT(MIPS_R_A1) | \
-+	 BIT(MIPS_R_A2) | \
-+	 BIT(MIPS_R_A3))
-+
-+/* CPU register arguments passed to callee on stack */
-+#define JIT_STACK_REGS    \
-+	(BIT(MIPS_R_T0) | \
-+	 BIT(MIPS_R_T1) | \
-+	 BIT(MIPS_R_T2) | \
-+	 BIT(MIPS_R_T3) | \
-+	 BIT(MIPS_R_T4) | \
-+	 BIT(MIPS_R_T5))
-+
-+/* Caller-saved CPU registers */
-+#define JIT_CALLER_REGS    \
-+	(JIT_RETURN_REGS | \
-+	 JIT_ARG_REGS    | \
-+	 JIT_STACK_REGS)
-+
-+/* Callee-saved CPU registers */
-+#define JIT_CALLEE_REGS   \
-+	(BIT(MIPS_R_S0) | \
-+	 BIT(MIPS_R_S1) | \
-+	 BIT(MIPS_R_S2) | \
-+	 BIT(MIPS_R_S3) | \
-+	 BIT(MIPS_R_S4) | \
-+	 BIT(MIPS_R_S5) | \
-+	 BIT(MIPS_R_S6) | \
-+	 BIT(MIPS_R_S7) | \
-+	 BIT(MIPS_R_GP) | \
-+	 BIT(MIPS_R_FP) | \
-+	 BIT(MIPS_R_RA))
-+
-+/*
-+ * Mapping of 64-bit eBPF registers to 32-bit native MIPS registers.
-+ *
-+ * 1) Native register pairs are ordered according to CPU endiannes, following
-+ *    the MIPS convention for passing 64-bit arguments and return values.
-+ * 2) The eBPF return value, arguments and callee-saved registers are mapped
-+ *    to their native MIPS equivalents.
-+ * 3) Since the 32 highest bits in the eBPF FP register are always zero,
-+ *    only one general-purpose register is actually needed for the mapping.
-+ *    We use the fp register for this purpose, and map the highest bits to
-+ *    the MIPS register r0 (zero).
-+ * 4) We use the MIPS gp and at registers as internal temporary registers
-+ *    for constant blinding. The gp register is callee-saved.
-+ * 5) One 64-bit temporary register is mapped for use when sign-extending
-+ *    immediate operands. MIPS registers t6-t9 are available to the JIT
-+ *    for as temporaries when implementing complex 64-bit operations.
-+ *
-+ * With this scheme all eBPF registers are being mapped to native MIPS
-+ * registers without having to use any stack scratch space. The direct
-+ * register mapping (2) simplifies the handling of function calls.
-+ */
-+static const u8 bpf2mips32[][2] = {
-+	/* Return value from in-kernel function, and exit value from eBPF */
-+	[BPF_REG_0] = {MIPS_R_V1, MIPS_R_V0},
-+	/* Arguments from eBPF program to in-kernel function */
-+	[BPF_REG_1] = {MIPS_R_A1, MIPS_R_A0},
-+	[BPF_REG_2] = {MIPS_R_A3, MIPS_R_A2},
-+	/* Remaining arguments, to be passed on the stack per O32 ABI */
-+	[BPF_REG_3] = {MIPS_R_T1, MIPS_R_T0},
-+	[BPF_REG_4] = {MIPS_R_T3, MIPS_R_T2},
-+	[BPF_REG_5] = {MIPS_R_T5, MIPS_R_T4},
-+	/* Callee-saved registers that in-kernel function will preserve */
-+	[BPF_REG_6] = {MIPS_R_S1, MIPS_R_S0},
-+	[BPF_REG_7] = {MIPS_R_S3, MIPS_R_S2},
-+	[BPF_REG_8] = {MIPS_R_S5, MIPS_R_S4},
-+	[BPF_REG_9] = {MIPS_R_S7, MIPS_R_S6},
-+	/* Read-only frame pointer to access the eBPF stack */
-+#ifdef __BIG_ENDIAN
-+	[BPF_REG_FP] = {MIPS_R_FP, MIPS_R_ZERO},
-+#else
-+	[BPF_REG_FP] = {MIPS_R_ZERO, MIPS_R_FP},
-+#endif
-+	/* Temporary register for blinding constants */
-+	[BPF_REG_AX] = {MIPS_R_GP, MIPS_R_AT},
-+	/* Temporary register for internal JIT use */
-+	[JIT_REG_TMP] = {MIPS_R_T7, MIPS_R_T6},
-+};
-+
-+/* Get low CPU register for a 64-bit eBPF register mapping */
-+static inline u8 lo(const u8 reg[])
-+{
-+#ifdef __BIG_ENDIAN
-+	return reg[0];
-+#else
-+	return reg[1];
-+#endif
-+}
-+
-+/* Get high CPU register for a 64-bit eBPF register mapping */
-+static inline u8 hi(const u8 reg[])
-+{
-+#ifdef __BIG_ENDIAN
-+	return reg[1];
-+#else
-+	return reg[0];
-+#endif
-+}
-+
-+/*
-+ * Mark a 64-bit CPU register pair as clobbered, it needs to be
-+ * saved/restored by the program if callee-saved.
-+ */
-+static void clobber_reg64(struct jit_context *ctx, const u8 reg[])
-+{
-+	clobber_reg(ctx, reg[0]);
-+	clobber_reg(ctx, reg[1]);
-+}
-+
-+/* dst = imm (sign-extended) */
-+static void emit_mov_se_i64(struct jit_context *ctx, const u8 dst[], s32 imm)
-+{
-+	emit_mov_i(ctx, lo(dst), imm);
-+	if (imm < 0)
-+		emit(ctx, addiu, hi(dst), MIPS_R_ZERO, -1);
-+	else
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* Zero extension, if verifier does not do it for us  */
-+static void emit_zext_ver(struct jit_context *ctx, const u8 dst[])
-+{
-+	if (!ctx->program->aux->verifier_zext) {
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		clobber_reg(ctx, hi(dst));
-+	}
-+}
-+
-+/* Load delay slot, if ISA mandates it */
-+static void emit_load_delay(struct jit_context *ctx)
-+{
-+	if (!cpu_has_mips_2_3_4_5_r)
-+		emit(ctx, nop);
-+}
-+
-+/* ALU immediate operation (64-bit) */
-+static void emit_alu_i64(struct jit_context *ctx,
-+			 const u8 dst[], s32 imm, u8 op)
-+{
-+	u8 src = MIPS_R_T6;
-+
-+	/*
-+	 * ADD/SUB with all but the max negative imm can be handled by
-+	 * inverting the operation and the imm value, saving one insn.
-+	 */
-+	if (imm > S32_MIN && imm < 0)
-+		switch (op) {
-+		case BPF_ADD:
-+			op = BPF_SUB;
-+			imm = -imm;
-+			break;
-+		case BPF_SUB:
-+			op = BPF_ADD;
-+			imm = -imm;
-+			break;
-+		}
-+
-+	/* Move immediate to temporary register */
-+	emit_mov_i(ctx, src, imm);
-+
-+	switch (op) {
-+	/* dst = dst + imm */
-+	case BPF_ADD:
-+		emit(ctx, addu, lo(dst), lo(dst), src);
-+		emit(ctx, sltu, MIPS_R_T9, lo(dst), src);
-+		emit(ctx, addu, hi(dst), hi(dst), MIPS_R_T9);
-+		if (imm < 0)
-+			emit(ctx, addiu, hi(dst), hi(dst), -1);
-+		break;
-+	/* dst = dst - imm */
-+	case BPF_SUB:
-+		emit(ctx, sltu, MIPS_R_T9, lo(dst), src);
-+		emit(ctx, subu, lo(dst), lo(dst), src);
-+		emit(ctx, subu, hi(dst), hi(dst), MIPS_R_T9);
-+		if (imm < 0)
-+			emit(ctx, addiu, hi(dst), hi(dst), 1);
-+		break;
-+	/* dst = dst | imm */
-+	case BPF_OR:
-+		emit(ctx, or, lo(dst), lo(dst), src);
-+		if (imm < 0)
-+			emit(ctx, addiu, hi(dst), MIPS_R_ZERO, -1);
-+		break;
-+	/* dst = dst & imm */
-+	case BPF_AND:
-+		emit(ctx, and, lo(dst), lo(dst), src);
-+		if (imm >= 0)
-+			emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		break;
-+	/* dst = dst ^ imm */
-+	case BPF_XOR:
-+		emit(ctx, xor, lo(dst), lo(dst), src);
-+		if (imm < 0) {
-+			emit(ctx, subu, hi(dst), MIPS_R_ZERO, hi(dst));
-+			emit(ctx, addiu, hi(dst), hi(dst), -1);
-+		}
-+		break;
-+	}
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* ALU register operation (64-bit) */
-+static void emit_alu_r64(struct jit_context *ctx,
-+			 const u8 dst[], const u8 src[], u8 op)
-+{
-+	switch (BPF_OP(op)) {
-+	/* dst = dst + src */
-+	case BPF_ADD:
-+		if (src == dst) {
-+			emit(ctx, srl, MIPS_R_T9, lo(dst), 31);
-+			emit(ctx, addu, lo(dst), lo(dst), lo(dst));
-+		} else {
-+			emit(ctx, addu, lo(dst), lo(dst), lo(src));
-+			emit(ctx, sltu, MIPS_R_T9, lo(dst), lo(src));
-+		}
-+		emit(ctx, addu, hi(dst), hi(dst), hi(src));
-+		emit(ctx, addu, hi(dst), hi(dst), MIPS_R_T9);
-+		break;
-+	/* dst = dst - src */
-+	case BPF_SUB:
-+		emit(ctx, sltu, MIPS_R_T9, lo(dst), lo(src));
-+		emit(ctx, subu, lo(dst), lo(dst), lo(src));
-+		emit(ctx, subu, hi(dst), hi(dst), hi(src));
-+		emit(ctx, subu, hi(dst), hi(dst), MIPS_R_T9);
-+		break;
-+	/* dst = dst | src */
-+	case BPF_OR:
-+		emit(ctx, or, lo(dst), lo(dst), lo(src));
-+		emit(ctx, or, hi(dst), hi(dst), hi(src));
-+		break;
-+	/* dst = dst & src */
-+	case BPF_AND:
-+		emit(ctx, and, lo(dst), lo(dst), lo(src));
-+		emit(ctx, and, hi(dst), hi(dst), hi(src));
-+		break;
-+	/* dst = dst ^ src */
-+	case BPF_XOR:
-+		emit(ctx, xor, lo(dst), lo(dst), lo(src));
-+		emit(ctx, xor, hi(dst), hi(dst), hi(src));
-+		break;
-+	}
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* ALU invert (64-bit) */
-+static void emit_neg_i64(struct jit_context *ctx, const u8 dst[])
-+{
-+	emit(ctx, sltu, MIPS_R_T9, MIPS_R_ZERO, lo(dst));
-+	emit(ctx, subu, lo(dst), MIPS_R_ZERO, lo(dst));
-+	emit(ctx, subu, hi(dst), MIPS_R_ZERO, hi(dst));
-+	emit(ctx, subu, hi(dst), hi(dst), MIPS_R_T9);
-+
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* ALU shift immediate (64-bit) */
-+static void emit_shift_i64(struct jit_context *ctx,
-+			   const u8 dst[], u32 imm, u8 op)
-+{
-+	switch (BPF_OP(op)) {
-+	/* dst = dst << imm */
-+	case BPF_LSH:
-+		if (imm < 32) {
-+			emit(ctx, srl, MIPS_R_T9, lo(dst), 32 - imm);
-+			emit(ctx, sll, lo(dst), lo(dst), imm);
-+			emit(ctx, sll, hi(dst), hi(dst), imm);
-+			emit(ctx, or, hi(dst), hi(dst), MIPS_R_T9);
-+		} else {
-+			emit(ctx, sll, hi(dst), lo(dst), imm - 32);
-+			emit(ctx, move, lo(dst), MIPS_R_ZERO);
-+		}
-+		break;
-+	/* dst = dst >> imm */
-+	case BPF_RSH:
-+		if (imm < 32) {
-+			emit(ctx, sll, MIPS_R_T9, hi(dst), 32 - imm);
-+			emit(ctx, srl, lo(dst), lo(dst), imm);
-+			emit(ctx, srl, hi(dst), hi(dst), imm);
-+			emit(ctx, or, lo(dst), lo(dst), MIPS_R_T9);
-+		} else {
-+			emit(ctx, srl, lo(dst), hi(dst), imm - 32);
-+			emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		}
-+		break;
-+	/* dst = dst >> imm (arithmetic) */
-+	case BPF_ARSH:
-+		if (imm < 32) {
-+			emit(ctx, sll, MIPS_R_T9, hi(dst), 32 - imm);
-+			emit(ctx, srl, lo(dst), lo(dst), imm);
-+			emit(ctx, sra, hi(dst), hi(dst), imm);
-+			emit(ctx, or, lo(dst), lo(dst), MIPS_R_T9);
-+		} else {
-+			emit(ctx, sra, lo(dst), hi(dst), imm - 32);
-+			emit(ctx, sra, hi(dst), hi(dst), 31);
-+		}
-+		break;
-+	}
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* ALU shift register (64-bit) */
-+static void emit_shift_r64(struct jit_context *ctx,
-+			   const u8 dst[], u8 src, u8 op)
-+{
-+	u8 t1 = MIPS_R_T8;
-+	u8 t2 = MIPS_R_T9;
-+
-+	emit(ctx, andi, t1, src, 32);              /* t1 = src & 32          */
-+	emit(ctx, beqz, t1, 16);                   /* PC += 16 if t1 == 0    */
-+	emit(ctx, nor, t2, src, MIPS_R_ZERO);      /* t2 = ~src (delay slot) */
-+
-+	switch (BPF_OP(op)) {
-+	/* dst = dst << src */
-+	case BPF_LSH:
-+		/* Next: shift >= 32 */
-+		emit(ctx, sllv, hi(dst), lo(dst), src);    /* dh = dl << src */
-+		emit(ctx, move, lo(dst), MIPS_R_ZERO);     /* dl = 0         */
-+		emit(ctx, b, 20);                          /* PC += 20       */
-+		/* +16: shift < 32 */
-+		emit(ctx, srl, t1, lo(dst), 1);            /* t1 = dl >> 1   */
-+		emit(ctx, srlv, t1, t1, t2);               /* t1 = t1 >> t2  */
-+		emit(ctx, sllv, lo(dst), lo(dst), src);    /* dl = dl << src */
-+		emit(ctx, sllv, hi(dst), hi(dst), src);    /* dh = dh << src */
-+		emit(ctx, or, hi(dst), hi(dst), t1);       /* dh = dh | t1   */
-+		break;
-+	/* dst = dst >> src */
-+	case BPF_RSH:
-+		/* Next: shift >= 32 */
-+		emit(ctx, srlv, lo(dst), hi(dst), src);    /* dl = dh >> src */
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);     /* dh = 0         */
-+		emit(ctx, b, 20);                          /* PC += 20       */
-+		/* +16: shift < 32 */
-+		emit(ctx, sll, t1, hi(dst), 1);            /* t1 = dl << 1   */
-+		emit(ctx, sllv, t1, t1, t2);               /* t1 = t1 << t2  */
-+		emit(ctx, srlv, lo(dst), lo(dst), src);    /* dl = dl >> src */
-+		emit(ctx, srlv, hi(dst), hi(dst), src);    /* dh = dh >> src */
-+		emit(ctx, or, lo(dst), lo(dst), t1);       /* dl = dl | t1   */
-+		break;
-+	/* dst = dst >> src (arithmetic) */
-+	case BPF_ARSH:
-+		/* Next: shift >= 32 */
-+		emit(ctx, srav, lo(dst), hi(dst), src);   /* dl = dh >>a src */
-+		emit(ctx, sra, hi(dst), hi(dst), 31);     /* dh = dh >>a 31  */
-+		emit(ctx, b, 20);                         /* PC += 20        */
-+		/* +16: shift < 32 */
-+		emit(ctx, sll, t1, hi(dst), 1);           /* t1 = dl << 1    */
-+		emit(ctx, sllv, t1, t1, t2);              /* t1 = t1 << t2   */
-+		emit(ctx, srlv, lo(dst), lo(dst), src);   /* dl = dl >>a src */
-+		emit(ctx, srav, hi(dst), hi(dst), src);   /* dh = dh >> src  */
-+		emit(ctx, or, lo(dst), lo(dst), t1);      /* dl = dl | t1    */
-+		break;
-+	}
-+
-+	/* +20: Done */
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* ALU mul immediate (64x32-bit) */
-+static void emit_mul_i64(struct jit_context *ctx, const u8 dst[], s32 imm)
-+{
-+	u8 src = MIPS_R_T6;
-+	u8 tmp = MIPS_R_T9;
-+
-+	switch (imm) {
-+	/* dst = dst * 1 is a no-op */
-+	case 1:
-+		break;
-+	/* dst = dst * -1 */
-+	case -1:
-+		emit_neg_i64(ctx, dst);
-+		break;
-+	case 0:
-+		emit_mov_r(ctx, lo(dst), MIPS_R_ZERO);
-+		emit_mov_r(ctx, hi(dst), MIPS_R_ZERO);
-+		break;
-+	/* Full 64x32 multiply */
-+	default:
-+		/* hi(dst) = hi(dst) * src(imm) */
-+		emit_mov_i(ctx, src, imm);
-+		if (cpu_has_mips32r1 || cpu_has_mips32r6) {
-+			emit(ctx, mul, hi(dst), hi(dst), src);
-+		} else {
-+			emit(ctx, multu, hi(dst), src);
-+			emit(ctx, mflo, hi(dst));
-+		}
-+
-+		/* hi(dst) = hi(dst) - lo(dst) */
-+		if (imm < 0)
-+			emit(ctx, subu, hi(dst), hi(dst), lo(dst));
-+
-+		/* tmp = lo(dst) * src(imm) >> 32 */
-+		/* lo(dst) = lo(dst) * src(imm) */
-+		if (cpu_has_mips32r6) {
-+			emit(ctx, muhu, tmp, lo(dst), src);
-+			emit(ctx, mulu, lo(dst), lo(dst), src);
-+		} else {
-+			emit(ctx, multu, lo(dst), src);
-+			emit(ctx, mflo, lo(dst));
-+			emit(ctx, mfhi, tmp);
-+		}
-+
-+		/* hi(dst) += tmp */
-+		emit(ctx, addu, hi(dst), hi(dst), tmp);
-+		clobber_reg64(ctx, dst);
-+		break;
-+	}
-+}
-+
-+/* ALU mul register (64x64-bit) */
-+static void emit_mul_r64(struct jit_context *ctx,
-+			 const u8 dst[], const u8 src[])
-+{
-+	u8 acc = MIPS_R_T8;
-+	u8 tmp = MIPS_R_T9;
-+
-+	/* acc = hi(dst) * lo(src) */
-+	if (cpu_has_mips32r1 || cpu_has_mips32r6) {
-+		emit(ctx, mul, acc, hi(dst), lo(src));
-+	} else {
-+		emit(ctx, multu, hi(dst), lo(src));
-+		emit(ctx, mflo, acc);
-+	}
-+
-+	/* tmp = lo(dst) * hi(src) */
-+	if (cpu_has_mips32r1 || cpu_has_mips32r6) {
-+		emit(ctx, mul, tmp, lo(dst), hi(src));
-+	} else {
-+		emit(ctx, multu, lo(dst), hi(src));
-+		emit(ctx, mflo, tmp);
-+	}
-+
-+	/* acc += tmp */
-+	emit(ctx, addu, acc, acc, tmp);
-+
-+	/* tmp = lo(dst) * lo(src) >> 32 */
-+	/* lo(dst) = lo(dst) * lo(src) */
-+	if (cpu_has_mips32r6) {
-+		emit(ctx, muhu, tmp, lo(dst), lo(src));
-+		emit(ctx, mulu, lo(dst), lo(dst), lo(src));
-+	} else {
-+		emit(ctx, multu, lo(dst), lo(src));
-+		emit(ctx, mflo, lo(dst));
-+		emit(ctx, mfhi, tmp);
-+	}
-+
-+	/* hi(dst) = acc + tmp */
-+	emit(ctx, addu, hi(dst), acc, tmp);
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* Helper function for 64-bit modulo */
-+static u64 jit_mod64(u64 a, u64 b)
-+{
-+	u64 rem;
-+
-+	div64_u64_rem(a, b, &rem);
-+	return rem;
-+}
-+
-+/* ALU div/mod register (64-bit) */
-+static void emit_divmod_r64(struct jit_context *ctx,
-+			    const u8 dst[], const u8 src[], u8 op)
-+{
-+	const u8 *r0 = bpf2mips32[BPF_REG_0]; /* Mapped to v0-v1 */
-+	const u8 *r1 = bpf2mips32[BPF_REG_1]; /* Mapped to a0-a1 */
-+	const u8 *r2 = bpf2mips32[BPF_REG_2]; /* Mapped to a2-a3 */
-+	int exclude, k;
-+	u32 addr = 0;
-+
-+	/* Push caller-saved registers on stack */
-+	push_regs(ctx, ctx->clobbered & JIT_CALLER_REGS,
-+		  0, JIT_RESERVED_STACK);
-+
-+	/* Put 64-bit arguments 1 and 2 in registers a0-a3 */
-+	for (k = 0; k < 2; k++) {
-+		emit(ctx, move, MIPS_R_T9, src[k]);
-+		emit(ctx, move, r1[k], dst[k]);
-+		emit(ctx, move, r2[k], MIPS_R_T9);
-+	}
-+
-+	/* Emit function call */
-+	switch (BPF_OP(op)) {
-+	/* dst = dst / src */
-+	case BPF_DIV:
-+		addr = (u32)&div64_u64;
-+		break;
-+	/* dst = dst % src */
-+	case BPF_MOD:
-+		addr = (u32)&jit_mod64;
-+		break;
-+	}
-+	emit_mov_i(ctx, MIPS_R_T9, addr);
-+	emit(ctx, jalr, MIPS_R_RA, MIPS_R_T9);
-+	emit(ctx, nop); /* Delay slot */
-+
-+	/* Store the 64-bit result in dst */
-+	emit(ctx, move, dst[0], r0[0]);
-+	emit(ctx, move, dst[1], r0[1]);
-+
-+	/* Restore caller-saved registers, excluding the computed result */
-+	exclude = BIT(lo(dst)) | BIT(hi(dst));
-+	pop_regs(ctx, ctx->clobbered & JIT_CALLER_REGS,
-+		 exclude, JIT_RESERVED_STACK);
-+	emit_load_delay(ctx);
-+
-+	clobber_reg64(ctx, dst);
-+	clobber_reg(ctx, MIPS_R_V0);
-+	clobber_reg(ctx, MIPS_R_V1);
-+	clobber_reg(ctx, MIPS_R_RA);
-+}
-+
-+/* Swap bytes in a register word */
-+static void emit_swap8_r(struct jit_context *ctx, u8 dst, u8 src, u8 mask)
-+{
-+	u8 tmp = MIPS_R_T9;
-+
-+	emit(ctx, and, tmp, src, mask); /* tmp = src & 0x00ff00ff */
-+	emit(ctx, sll, tmp, tmp, 8);    /* tmp = tmp << 8         */
-+	emit(ctx, srl, dst, src, 8);    /* dst = src >> 8         */
-+	emit(ctx, and, dst, dst, mask); /* dst = dst & 0x00ff00ff */
-+	emit(ctx, or,  dst, dst, tmp);  /* dst = dst | tmp        */
-+}
-+
-+/* Swap half words in a register word */
-+static void emit_swap16_r(struct jit_context *ctx, u8 dst, u8 src)
-+{
-+	u8 tmp = MIPS_R_T9;
-+
-+	emit(ctx, sll, tmp, src, 16);  /* tmp = src << 16 */
-+	emit(ctx, srl, dst, src, 16);  /* dst = src >> 16 */
-+	emit(ctx, or,  dst, dst, tmp); /* dst = dst | tmp */
-+}
-+
-+/* Swap bytes and truncate a register double word, word or half word */
-+static void emit_bswap_r64(struct jit_context *ctx, const u8 dst[], u32 width)
-+{
-+	u8 tmp = MIPS_R_T8;
-+
-+	switch (width) {
-+	/* Swap bytes in a double word */
-+	case 64:
-+		if (cpu_has_mips32r2 || cpu_has_mips32r6) {
-+			emit(ctx, rotr, tmp, hi(dst), 16);
-+			emit(ctx, rotr, hi(dst), lo(dst), 16);
-+			emit(ctx, wsbh, lo(dst), tmp);
-+			emit(ctx, wsbh, hi(dst), hi(dst));
-+		} else {
-+			emit_swap16_r(ctx, tmp, lo(dst));
-+			emit_swap16_r(ctx, lo(dst), hi(dst));
-+			emit(ctx, move, hi(dst), tmp);
-+
-+			emit(ctx, lui, tmp, 0xff);      /* tmp = 0x00ff0000 */
-+			emit(ctx, ori, tmp, tmp, 0xff); /* tmp = 0x00ff00ff */
-+			emit_swap8_r(ctx, lo(dst), lo(dst), tmp);
-+			emit_swap8_r(ctx, hi(dst), hi(dst), tmp);
-+		}
-+		break;
-+	/* Swap bytes in a word */
-+	/* Swap bytes in a half word */
-+	case 32:
-+	case 16:
-+		emit_bswap_r(ctx, lo(dst), width);
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		break;
-+	}
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* Truncate a register double word, word or half word */
-+static void emit_trunc_r64(struct jit_context *ctx, const u8 dst[], u32 width)
-+{
-+	switch (width) {
-+	case 64:
-+		break;
-+	/* Zero-extend a word */
-+	case 32:
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		clobber_reg(ctx, hi(dst));
-+		break;
-+	/* Zero-extend a half word */
-+	case 16:
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		emit(ctx, andi, lo(dst), lo(dst), 0xffff);
-+		clobber_reg64(ctx, dst);
-+		break;
-+	}
-+}
-+
-+/* Load operation: dst = *(size*)(src + off) */
-+static void emit_ldx(struct jit_context *ctx,
-+		     const u8 dst[], u8 src, s16 off, u8 size)
-+{
-+	switch (size) {
-+	/* Load a byte */
-+	case BPF_B:
-+		emit(ctx, lbu, lo(dst), off, src);
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		break;
-+	/* Load a half word */
-+	case BPF_H:
-+		emit(ctx, lhu, lo(dst), off, src);
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		break;
-+	/* Load a word */
-+	case BPF_W:
-+		emit(ctx, lw, lo(dst), off, src);
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		break;
-+	/* Load a double word */
-+	case BPF_DW:
-+		if (dst[1] == src) {
-+			emit(ctx, lw, dst[0], off + 4, src);
-+			emit(ctx, lw, dst[1], off, src);
-+		} else {
-+			emit(ctx, lw, dst[1], off, src);
-+			emit(ctx, lw, dst[0], off + 4, src);
-+		}
-+		emit_load_delay(ctx);
-+		break;
-+	}
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* Store operation: *(size *)(dst + off) = src */
-+static void emit_stx(struct jit_context *ctx,
-+		     const u8 dst, const u8 src[], s16 off, u8 size)
-+{
-+	switch (size) {
-+	/* Store a byte */
-+	case BPF_B:
-+		emit(ctx, sb, lo(src), off, dst);
-+		break;
-+	/* Store a half word */
-+	case BPF_H:
-+		emit(ctx, sh, lo(src), off, dst);
-+		break;
-+	/* Store a word */
-+	case BPF_W:
-+		emit(ctx, sw, lo(src), off, dst);
-+		break;
-+	/* Store a double word */
-+	case BPF_DW:
-+		emit(ctx, sw, src[1], off, dst);
-+		emit(ctx, sw, src[0], off + 4, dst);
-+		break;
-+	}
-+}
-+
-+/* Atomic read-modify-write (32-bit, non-ll/sc fallback) */
-+static void emit_atomic_r32(struct jit_context *ctx,
-+			    u8 dst, u8 src, s16 off, u8 code)
-+{
-+	u32 exclude = 0;
-+	u32 addr = 0;
-+
-+	/* Push caller-saved registers on stack */
-+	push_regs(ctx, ctx->clobbered & JIT_CALLER_REGS,
-+		  0, JIT_RESERVED_STACK);
-+	/*
-+	 * Argument 1: dst+off if xchg, otherwise src, passed in register a0
-+	 * Argument 2: src if xchg, othersize dst+off, passed in register a1
-+	 */
-+	emit(ctx, move, MIPS_R_T9, dst);
-+	emit(ctx, move, MIPS_R_A0, src);
-+	emit(ctx, addiu, MIPS_R_A1, MIPS_R_T9, off);
-+
-+	/* Emit function call */
-+	switch (code) {
-+	case BPF_ADD:
-+		addr = (u32)&atomic_add;
-+		break;
-+	case BPF_SUB:
-+		addr = (u32)&atomic_sub;
-+		break;
-+	case BPF_OR:
-+		addr = (u32)&atomic_or;
-+		break;
-+	case BPF_AND:
-+		addr = (u32)&atomic_and;
-+		break;
-+	case BPF_XOR:
-+		addr = (u32)&atomic_xor;
-+		break;
-+	}
-+	emit_mov_i(ctx, MIPS_R_T9, addr);
-+	emit(ctx, jalr, MIPS_R_RA, MIPS_R_T9);
-+	emit(ctx, nop); /* Delay slot */
-+
-+	/* Restore caller-saved registers, except any fetched value */
-+	pop_regs(ctx, ctx->clobbered & JIT_CALLER_REGS,
-+		 exclude, JIT_RESERVED_STACK);
-+	emit_load_delay(ctx);
-+	clobber_reg(ctx, MIPS_R_RA);
-+}
-+
-+/* Atomic read-modify-write (64-bit) */
-+static void emit_atomic_r64(struct jit_context *ctx,
-+			    u8 dst, const u8 src[], s16 off, u8 code)
-+{
-+	const u8 *r1 = bpf2mips32[BPF_REG_1]; /* Mapped to a0-a1 */
-+	u32 exclude = 0;
-+	u32 addr = 0;
-+
-+	/* Push caller-saved registers on stack */
-+	push_regs(ctx, ctx->clobbered & JIT_CALLER_REGS,
-+		  0, JIT_RESERVED_STACK);
-+	/*
-+	 * Argument 1: 64-bit src, passed in registers a0-a1
-+	 * Argument 2: 32-bit dst+off, passed in register a2
-+	 */
-+	emit(ctx, move, MIPS_R_T9, dst);
-+	emit(ctx, move, r1[0], src[0]);
-+	emit(ctx, move, r1[1], src[1]);
-+	emit(ctx, addiu, MIPS_R_A2, MIPS_R_T9, off);
-+
-+	/* Emit function call */
-+	switch (code) {
-+	case BPF_ADD:
-+		addr = (u32)&atomic64_add;
-+		break;
-+	case BPF_SUB:
-+		addr = (u32)&atomic64_sub;
-+		break;
-+	case BPF_OR:
-+		addr = (u32)&atomic64_or;
-+		break;
-+	case BPF_AND:
-+		addr = (u32)&atomic64_and;
-+		break;
-+	case BPF_XOR:
-+		addr = (u32)&atomic64_xor;
-+		break;
-+	}
-+	emit_mov_i(ctx, MIPS_R_T9, addr);
-+	emit(ctx, jalr, MIPS_R_RA, MIPS_R_T9);
-+	emit(ctx, nop); /* Delay slot */
-+
-+	/* Restore caller-saved registers, except any fetched value */
-+	pop_regs(ctx, ctx->clobbered & JIT_CALLER_REGS,
-+		 exclude, JIT_RESERVED_STACK);
-+	emit_load_delay(ctx);
-+	clobber_reg(ctx, MIPS_R_RA);
-+}
-+
-+/*
-+ * Conditional movz or an emulated equivalent.
-+ * Note that the rs register may be modified.
-+ */
-+static void emit_movz_r(struct jit_context *ctx, u8 rd, u8 rs, u8 rt)
-+{
-+	if (cpu_has_mips_2) {
-+		emit(ctx, movz, rd, rs, rt);           /* rd = rt ? rd : rs  */
-+	} else if (cpu_has_mips32r6) {
-+		if (rs != MIPS_R_ZERO)
-+			emit(ctx, seleqz, rs, rs, rt); /* rs = 0 if rt == 0  */
-+		emit(ctx, selnez, rd, rd, rt);         /* rd = 0 if rt != 0  */
-+		if (rs != MIPS_R_ZERO)
-+			emit(ctx, or, rd, rd, rs);     /* rd = rd | rs       */
-+	} else {
-+		emit(ctx, bnez, rt, 8);                /* PC += 8 if rd != 0 */
-+		emit(ctx, nop);                        /* +0: delay slot     */
-+		emit(ctx, or, rd, rs, MIPS_R_ZERO);    /* +4: rd = rs        */
-+	}
-+	clobber_reg(ctx, rd);
-+	clobber_reg(ctx, rs);
-+}
-+
-+/*
-+ * Conditional movn or an emulated equivalent.
-+ * Note that the rs register may be modified.
-+ */
-+static void emit_movn_r(struct jit_context *ctx, u8 rd, u8 rs, u8 rt)
-+{
-+	if (cpu_has_mips_2) {
-+		emit(ctx, movn, rd, rs, rt);           /* rd = rt ? rs : rd  */
-+	} else if (cpu_has_mips32r6) {
-+		if (rs != MIPS_R_ZERO)
-+			emit(ctx, selnez, rs, rs, rt); /* rs = 0 if rt == 0  */
-+		emit(ctx, seleqz, rd, rd, rt);         /* rd = 0 if rt != 0  */
-+		if (rs != MIPS_R_ZERO)
-+			emit(ctx, or, rd, rd, rs);     /* rd = rd | rs       */
-+	} else {
-+		emit(ctx, beqz, rt, 8);                /* PC += 8 if rd == 0 */
-+		emit(ctx, nop);                        /* +0: delay slot     */
-+		emit(ctx, or, rd, rs, MIPS_R_ZERO);    /* +4: rd = rs        */
-+	}
-+	clobber_reg(ctx, rd);
-+	clobber_reg(ctx, rs);
-+}
-+
-+/* Emulation of 64-bit sltiu rd, rs, imm, where imm may be S32_MAX + 1 */
-+static void emit_sltiu_r64(struct jit_context *ctx, u8 rd,
-+			   const u8 rs[], s64 imm)
-+{
-+	u8 tmp = MIPS_R_T9;
-+
-+	if (imm < 0) {
-+		emit_mov_i(ctx, rd, imm);                 /* rd = imm        */
-+		emit(ctx, sltu, rd, lo(rs), rd);          /* rd = rsl < rd   */
-+		emit(ctx, sltiu, tmp, hi(rs), -1);        /* tmp = rsh < ~0U */
-+		emit(ctx, or, rd, rd, tmp);               /* rd = rd | tmp   */
-+	} else { /* imm >= 0 */
-+		if (imm > 0x7fff) {
-+			emit_mov_i(ctx, rd, (s32)imm);     /* rd = imm       */
-+			emit(ctx, sltu, rd, lo(rs), rd);   /* rd = rsl < rd  */
-+		} else {
-+			emit(ctx, sltiu, rd, lo(rs), imm); /* rd = rsl < imm */
-+		}
-+		emit_movn_r(ctx, rd, MIPS_R_ZERO, hi(rs)); /* rd = 0 if rsh  */
-+	}
-+}
-+
-+/* Emulation of 64-bit sltu rd, rs, rt */
-+static void emit_sltu_r64(struct jit_context *ctx, u8 rd,
-+			  const u8 rs[], const u8 rt[])
-+{
-+	u8 tmp = MIPS_R_T9;
-+
-+	emit(ctx, sltu, rd, lo(rs), lo(rt));           /* rd = rsl < rtl     */
-+	emit(ctx, subu, tmp, hi(rs), hi(rt));          /* tmp = rsh - rth    */
-+	emit_movn_r(ctx, rd, MIPS_R_ZERO, tmp);        /* rd = 0 if tmp != 0 */
-+	emit(ctx, sltu, tmp, hi(rs), hi(rt));          /* tmp = rsh < rth    */
-+	emit(ctx, or, rd, rd, tmp);                    /* rd = rd | tmp      */
-+}
-+
-+/* Emulation of 64-bit slti rd, rs, imm, where imm may be S32_MAX + 1 */
-+static void emit_slti_r64(struct jit_context *ctx, u8 rd,
-+			  const u8 rs[], s64 imm)
-+{
-+	u8 t1 = MIPS_R_T8;
-+	u8 t2 = MIPS_R_T9;
-+	u8 cmp;
-+
-+	/*
-+	 * if ((rs < 0) ^ (imm < 0)) t1 = imm >u rsl
-+	 * else                      t1 = rsl <u imm
-+	 */
-+	emit_mov_i(ctx, rd, (s32)imm);
-+	emit(ctx, sltu, t1, lo(rs), rd);               /* t1 = rsl <u imm   */
-+	emit(ctx, sltu, t2, rd, lo(rs));               /* t2 = imm <u rsl   */
-+	emit(ctx, srl, rd, hi(rs), 31);                /* rd = rsh >> 31    */
-+	if (imm < 0)
-+		emit_movz_r(ctx, t1, t2, rd);          /* t1 = rd ? t1 : t2 */
-+	else
-+		emit_movn_r(ctx, t1, t2, rd);          /* t1 = rd ? t2 : t1 */
-+	/*
-+	 * if ((imm < 0 && rsh != 0xffffffff) ||
-+	 *     (imm >= 0 && rsh != 0))
-+	 *      t1 = 0
-+	 */
-+	if (imm < 0) {
-+		emit(ctx, addiu, rd, hi(rs), 1);       /* rd = rsh + 1 */
-+		cmp = rd;
-+	} else { /* imm >= 0 */
-+		cmp = hi(rs);
-+	}
-+	emit_movn_r(ctx, t1, MIPS_R_ZERO, cmp);        /* t1 = 0 if cmp != 0 */
-+
-+	/*
-+	 * if (imm < 0) rd = rsh < -1
-+	 * else         rd = rsh != 0
-+	 * rd = rd | t1
-+	 */
-+	emit(ctx, slti, rd, hi(rs), imm < 0 ? -1 : 0); /* rd = rsh < hi(imm) */
-+	emit(ctx, or, rd, rd, t1);                     /* rd = rd | t1       */
-+}
-+
-+/* Emulation of 64-bit(slt rd, rs, rt) */
-+static void emit_slt_r64(struct jit_context *ctx, u8 rd,
-+			 const u8 rs[], const u8 rt[])
-+{
-+	u8 t1 = MIPS_R_T7;
-+	u8 t2 = MIPS_R_T8;
-+	u8 t3 = MIPS_R_T9;
-+
-+	/*
-+	 * if ((rs < 0) ^ (rt < 0)) t1 = rtl <u rsl
-+	 * else                     t1 = rsl <u rtl
-+	 * if (rsh == rth)          t1 = 0
-+	 */
-+	emit(ctx, sltu, t1, lo(rs), lo(rt));           /* t1 = rsl <u rtl   */
-+	emit(ctx, sltu, t2, lo(rt), lo(rs));           /* t2 = rtl <u rsl   */
-+	emit(ctx, xor, t3, hi(rs), hi(rt));            /* t3 = rlh ^ rth    */
-+	emit(ctx, srl, rd, t3, 31);                    /* rd = t3 >> 31     */
-+	emit_movn_r(ctx, t1, t2, rd);                  /* t1 = rd ? t2 : t1 */
-+	emit_movn_r(ctx, t1, MIPS_R_ZERO, t3);         /* t1 = 0 if t3 != 0 */
-+
-+	/* rd = (rsh < rth) | t1 */
-+	emit(ctx, slt, rd, hi(rs), hi(rt));            /* rd = rsh <s rth   */
-+	emit(ctx, or, rd, rd, t1);                     /* rd = rd | t1      */
-+}
-+
-+/* Jump immediate (64-bit) */
-+static void emit_jmp_i64(struct jit_context *ctx,
-+			 const u8 dst[], s32 imm, s32 off, u8 op)
-+{
-+	u8 tmp = MIPS_R_T6;
-+
-+	switch (op) {
-+	/* No-op, used internally for branch optimization */
-+	case JIT_JNOP:
-+		break;
-+	/* PC += off if dst == imm */
-+	/* PC += off if dst != imm */
-+	case BPF_JEQ:
-+	case BPF_JNE:
-+		if (imm >= -0x7fff && imm <= 0x8000) {
-+			emit(ctx, addiu, tmp, lo(dst), -imm);
-+		} else if ((u32)imm <= 0xffff) {
-+			emit(ctx, xori, tmp, lo(dst), imm);
-+		} else {       /* Register fallback */
-+			emit_mov_i(ctx, tmp, imm);
-+			emit(ctx, xor, tmp, lo(dst), tmp);
-+		}
-+		if (imm < 0) { /* Compare sign extension */
-+			emit(ctx, addu, MIPS_R_T9, hi(dst), 1);
-+			emit(ctx, or, tmp, tmp, MIPS_R_T9);
-+		} else {       /* Compare zero extension */
-+			emit(ctx, or, tmp, tmp, hi(dst));
-+		}
-+		if (op == BPF_JEQ)
-+			emit(ctx, beqz, tmp, off);
-+		else   /* BPF_JNE */
-+			emit(ctx, bnez, tmp, off);
-+		break;
-+	/* PC += off if dst & imm */
-+	/* PC += off if (dst & imm) == 0 (not in BPF, used for long jumps) */
-+	case BPF_JSET:
-+	case JIT_JNSET:
-+		if ((u32)imm <= 0xffff) {
-+			emit(ctx, andi, tmp, lo(dst), imm);
-+		} else {     /* Register fallback */
-+			emit_mov_i(ctx, tmp, imm);
-+			emit(ctx, and, tmp, lo(dst), tmp);
-+		}
-+		if (imm < 0) /* Sign-extension pulls in high word */
-+			emit(ctx, or, tmp, tmp, hi(dst));
-+		if (op == BPF_JSET)
-+			emit(ctx, bnez, tmp, off);
-+		else   /* JIT_JNSET */
-+			emit(ctx, beqz, tmp, off);
-+		break;
-+	/* PC += off if dst > imm */
-+	case BPF_JGT:
-+		emit_sltiu_r64(ctx, tmp, dst, (s64)imm + 1);
-+		emit(ctx, beqz, tmp, off);
-+		break;
-+	/* PC += off if dst >= imm */
-+	case BPF_JGE:
-+		emit_sltiu_r64(ctx, tmp, dst, imm);
-+		emit(ctx, beqz, tmp, off);
-+		break;
-+	/* PC += off if dst < imm */
-+	case BPF_JLT:
-+		emit_sltiu_r64(ctx, tmp, dst, imm);
-+		emit(ctx, bnez, tmp, off);
-+		break;
-+	/* PC += off if dst <= imm */
-+	case BPF_JLE:
-+		emit_sltiu_r64(ctx, tmp, dst, (s64)imm + 1);
-+		emit(ctx, bnez, tmp, off);
-+		break;
-+	/* PC += off if dst > imm (signed) */
-+	case BPF_JSGT:
-+		emit_slti_r64(ctx, tmp, dst, (s64)imm + 1);
-+		emit(ctx, beqz, tmp, off);
-+		break;
-+	/* PC += off if dst >= imm (signed) */
-+	case BPF_JSGE:
-+		emit_slti_r64(ctx, tmp, dst, imm);
-+		emit(ctx, beqz, tmp, off);
-+		break;
-+	/* PC += off if dst < imm (signed) */
-+	case BPF_JSLT:
-+		emit_slti_r64(ctx, tmp, dst, imm);
-+		emit(ctx, bnez, tmp, off);
-+		break;
-+	/* PC += off if dst <= imm (signed) */
-+	case BPF_JSLE:
-+		emit_slti_r64(ctx, tmp, dst, (s64)imm + 1);
-+		emit(ctx, bnez, tmp, off);
-+		break;
-+	}
-+}
-+
-+/* Jump register (64-bit) */
-+static void emit_jmp_r64(struct jit_context *ctx,
-+			 const u8 dst[], const u8 src[], s32 off, u8 op)
-+{
-+	u8 t1 = MIPS_R_T6;
-+	u8 t2 = MIPS_R_T7;
-+
-+	switch (op) {
-+	/* No-op, used internally for branch optimization */
-+	case JIT_JNOP:
-+		break;
-+	/* PC += off if dst == src */
-+	/* PC += off if dst != src */
-+	case BPF_JEQ:
-+	case BPF_JNE:
-+		emit(ctx, subu, t1, lo(dst), lo(src));
-+		emit(ctx, subu, t2, hi(dst), hi(src));
-+		emit(ctx, or, t1, t1, t2);
-+		if (op == BPF_JEQ)
-+			emit(ctx, beqz, t1, off);
-+		else   /* BPF_JNE */
-+			emit(ctx, bnez, t1, off);
-+		break;
-+	/* PC += off if dst & src */
-+	/* PC += off if (dst & imm) == 0 (not in BPF, used for long jumps) */
-+	case BPF_JSET:
-+	case JIT_JNSET:
-+		emit(ctx, and, t1, lo(dst), lo(src));
-+		emit(ctx, and, t2, hi(dst), hi(src));
-+		emit(ctx, or, t1, t1, t2);
-+		if (op == BPF_JSET)
-+			emit(ctx, bnez, t1, off);
-+		else   /* JIT_JNSET */
-+			emit(ctx, beqz, t1, off);
-+		break;
-+	/* PC += off if dst > src */
-+	case BPF_JGT:
-+		emit_sltu_r64(ctx, t1, src, dst);
-+		emit(ctx, bnez, t1, off);
-+		break;
-+	/* PC += off if dst >= src */
-+	case BPF_JGE:
-+		emit_sltu_r64(ctx, t1, dst, src);
-+		emit(ctx, beqz, t1, off);
-+		break;
-+	/* PC += off if dst < src */
-+	case BPF_JLT:
-+		emit_sltu_r64(ctx, t1, dst, src);
-+		emit(ctx, bnez, t1, off);
-+		break;
-+	/* PC += off if dst <= src */
-+	case BPF_JLE:
-+		emit_sltu_r64(ctx, t1, src, dst);
-+		emit(ctx, beqz, t1, off);
-+		break;
-+	/* PC += off if dst > src (signed) */
-+	case BPF_JSGT:
-+		emit_slt_r64(ctx, t1, src, dst);
-+		emit(ctx, bnez, t1, off);
-+		break;
-+	/* PC += off if dst >= src (signed) */
-+	case BPF_JSGE:
-+		emit_slt_r64(ctx, t1, dst, src);
-+		emit(ctx, beqz, t1, off);
-+		break;
-+	/* PC += off if dst < src (signed) */
-+	case BPF_JSLT:
-+		emit_slt_r64(ctx, t1, dst, src);
-+		emit(ctx, bnez, t1, off);
-+		break;
-+	/* PC += off if dst <= src (signed) */
-+	case BPF_JSLE:
-+		emit_slt_r64(ctx, t1, src, dst);
-+		emit(ctx, beqz, t1, off);
-+		break;
-+	}
-+}
-+
-+/* Function call */
-+static int emit_call(struct jit_context *ctx, const struct bpf_insn *insn)
-+{
-+	bool fixed;
-+	u64 addr;
-+
-+	/* Decode the call address */
-+	if (bpf_jit_get_func_addr(ctx->program, insn, false,
-+				  &addr, &fixed) < 0)
-+		return -1;
-+	if (!fixed)
-+		return -1;
-+
-+	/* Push stack arguments */
-+	push_regs(ctx, JIT_STACK_REGS, 0, JIT_RESERVED_STACK);
-+
-+	/* Emit function call */
-+	emit_mov_i(ctx, MIPS_R_T9, addr);
-+	emit(ctx, jalr, MIPS_R_RA, MIPS_R_T9);
-+	emit(ctx, nop); /* Delay slot */
-+
-+	clobber_reg(ctx, MIPS_R_RA);
-+	clobber_reg(ctx, MIPS_R_V0);
-+	clobber_reg(ctx, MIPS_R_V1);
-+	return 0;
-+}
-+
-+/* Function tail call */
-+static int emit_tail_call(struct jit_context *ctx)
-+{
-+	u8 ary = lo(bpf2mips32[BPF_REG_2]);
-+	u8 ind = lo(bpf2mips32[BPF_REG_3]);
-+	u8 t1 = MIPS_R_T8;
-+	u8 t2 = MIPS_R_T9;
-+	int off;
-+
-+	/*
-+	 * Tail call:
-+	 * eBPF R1   - function argument (context ptr), passed in a0-a1
-+	 * eBPF R2   - ptr to object with array of function entry points
-+	 * eBPF R3   - array index of function to be called
-+	 * stack[sz] - remaining tail call count, initialized in prologue
-+	 */
-+
-+	/* if (ind >= ary->map.max_entries) goto out */
-+	off = offsetof(struct bpf_array, map.max_entries);
-+	if (off > 0x7fff)
-+		return -1;
-+	emit(ctx, lw, t1, off, ary);             /* t1 = ary->map.max_entries*/
-+	emit_load_delay(ctx);                    /* Load delay slot          */
-+	emit(ctx, sltu, t1, ind, t1);            /* t1 = ind < t1            */
-+	emit(ctx, beqz, t1, get_offset(ctx, 1)); /* PC += off(1) if t1 == 0  */
-+						 /* (next insn delay slot)   */
-+	/* if (TCC-- <= 0) goto out */
-+	emit(ctx, lw, t2, ctx->stack_size, MIPS_R_SP);  /* t2 = *(SP + size) */
-+	emit_load_delay(ctx);                     /* Load delay slot         */
-+	emit(ctx, blez, t2, get_offset(ctx, 1));  /* PC += off(1) if t2 < 0  */
-+	emit(ctx, addiu, t2, t2, -1);             /* t2-- (delay slot)       */
-+	emit(ctx, sw, t2, ctx->stack_size, MIPS_R_SP);  /* *(SP + size) = t2 */
-+
-+	/* prog = ary->ptrs[ind] */
-+	off = offsetof(struct bpf_array, ptrs);
-+	if (off > 0x7fff)
-+		return -1;
-+	emit(ctx, sll, t1, ind, 2);               /* t1 = ind << 2           */
-+	emit(ctx, addu, t1, t1, ary);             /* t1 += ary               */
-+	emit(ctx, lw, t2, off, t1);               /* t2 = *(t1 + off)        */
-+	emit_load_delay(ctx);                     /* Load delay slot         */
-+
-+	/* if (prog == 0) goto out */
-+	emit(ctx, beqz, t2, get_offset(ctx, 1));  /* PC += off(1) if t2 == 0 */
-+	emit(ctx, nop);                           /* Delay slot              */
-+
-+	/* func = prog->bpf_func + 8 (prologue skip offset) */
-+	off = offsetof(struct bpf_prog, bpf_func);
-+	if (off > 0x7fff)
-+		return -1;
-+	emit(ctx, lw, t1, off, t2);                /* t1 = *(t2 + off)       */
-+	emit_load_delay(ctx);                      /* Load delay slot        */
-+	emit(ctx, addiu, t1, t1, JIT_TCALL_SKIP);  /* t1 += skip (8 or 12)   */
-+
-+	/* goto func */
-+	build_epilogue(ctx, t1);
-+	return 0;
-+}
-+
-+/*
-+ * Stack frame layout for a JITed program (stack grows down).
-+ *
-+ * Higher address  : Caller's stack frame       :
-+ *                 :----------------------------:
-+ *                 : 64-bit eBPF args r3-r5     :
-+ *                 :----------------------------:
-+ *                 : Reserved / tail call count :
-+ *                 +============================+  <--- MIPS sp before call
-+ *                 | Callee-saved registers,    |
-+ *                 | including RA and FP        |
-+ *                 +----------------------------+  <--- eBPF FP (MIPS zero,fp)
-+ *                 | Local eBPF variables       |
-+ *                 | allocated by program       |
-+ *                 +----------------------------+
-+ *                 | Reserved for caller-saved  |
-+ *                 | registers                  |
-+ *                 +----------------------------+
-+ *                 | Reserved for 64-bit eBPF   |
-+ *                 | args r3-r5 & args passed   |
-+ *                 | on stack in kernel calls   |
-+ * Lower address   +============================+  <--- MIPS sp
-+ */
-+
-+/* Build program prologue to set up the stack and registers */
-+void build_prologue(struct jit_context *ctx)
-+{
-+	const u8 *r1 = bpf2mips32[BPF_REG_1];
-+	const u8 *fp = bpf2mips32[BPF_REG_FP];
-+	int stack, saved, locals, reserved;
-+
-+	/*
-+	 * The first two instructions initialize TCC in the reserved (for us)
-+	 * 16-byte area in the parent's stack frame. On a tail call, the
-+	 * calling function jumps into the prologue after these instructions.
-+	 */
-+	emit(ctx, ori, MIPS_R_T9, MIPS_R_ZERO,
-+	     min(MAX_TAIL_CALL_CNT + 1, 0xffff));
-+	emit(ctx, sw, MIPS_R_T9, 0, MIPS_R_SP);
-+
-+	/*
-+	 * Register eBPF R1 contains the 32-bit context pointer argument.
-+	 * A 32-bit argument is always passed in MIPS register a0, regardless
-+	 * of CPU endianness. Initialize R1 accordingly and zero-extend.
-+	 */
-+#ifdef __BIG_ENDIAN
-+	emit(ctx, move, lo(r1), MIPS_R_A0);
-+#endif
-+
-+	/* === Entry-point for tail calls === */
-+
-+	/* Zero-extend the 32-bit argument */
-+	emit(ctx, move, hi(r1), MIPS_R_ZERO);
-+
-+	/* If the eBPF frame pointer was accessed it must be saved */
-+	if (ctx->accessed & BIT(BPF_REG_FP))
-+		clobber_reg64(ctx, fp);
-+
-+	/* Compute the stack space needed for callee-saved registers */
-+	saved = hweight32(ctx->clobbered & JIT_CALLEE_REGS) * sizeof(u32);
-+	saved = ALIGN(saved, MIPS_STACK_ALIGNMENT);
-+
-+	/* Stack space used by eBPF program local data */
-+	locals = ALIGN(ctx->program->aux->stack_depth, MIPS_STACK_ALIGNMENT);
-+
-+	/*
-+	 * If we are emitting function calls, reserve extra stack space for
-+	 * caller-saved registers and function arguments passed on the stack.
-+	 * The required space is computed automatically during resource
-+	 * usage discovery (pass 1).
-+	 */
-+	reserved = ctx->stack_used;
-+
-+	/* Allocate the stack frame */
-+	stack = ALIGN(saved + locals + reserved, MIPS_STACK_ALIGNMENT);
-+	emit(ctx, addiu, MIPS_R_SP, MIPS_R_SP, -stack);
-+
-+	/* Store callee-saved registers on stack */
-+	push_regs(ctx, ctx->clobbered & JIT_CALLEE_REGS, 0, stack - saved);
-+
-+	/* Initialize the eBPF frame pointer if accessed */
-+	if (ctx->accessed & BIT(BPF_REG_FP))
-+		emit(ctx, addiu, lo(fp), MIPS_R_SP, stack - saved);
-+
-+	ctx->saved_size = saved;
-+	ctx->stack_size = stack;
-+}
-+
-+/* Build the program epilogue to restore the stack and registers */
-+void build_epilogue(struct jit_context *ctx, int dest_reg)
-+{
-+	/* Restore callee-saved registers from stack */
-+	pop_regs(ctx, ctx->clobbered & JIT_CALLEE_REGS, 0,
-+		 ctx->stack_size - ctx->saved_size);
-+	/*
-+	 * A 32-bit return value is always passed in MIPS register v0,
-+	 * but on big-endian targets the low part of R0 is mapped to v1.
-+	 */
-+#ifdef __BIG_ENDIAN
-+	emit(ctx, move, MIPS_R_V0, MIPS_R_V1);
-+#endif
-+
-+	/* Jump to the return address and adjust the stack pointer */
-+	emit(ctx, jr, dest_reg);
-+	emit(ctx, addiu, MIPS_R_SP, MIPS_R_SP, ctx->stack_size);
-+}
-+
-+/* Build one eBPF instruction */
-+int build_insn(const struct bpf_insn *insn, struct jit_context *ctx)
-+{
-+	const u8 *dst = bpf2mips32[insn->dst_reg];
-+	const u8 *src = bpf2mips32[insn->src_reg];
-+	const u8 *tmp = bpf2mips32[JIT_REG_TMP];
-+	u8 code = insn->code;
-+	s16 off = insn->off;
-+	s32 imm = insn->imm;
-+	s32 val, rel;
-+	u8 alu, jmp;
-+
-+	switch (code) {
-+	/* ALU operations */
-+	/* dst = imm */
-+	case BPF_ALU | BPF_MOV | BPF_K:
-+		emit_mov_i(ctx, lo(dst), imm);
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = src */
-+	case BPF_ALU | BPF_MOV | BPF_X:
-+		if (imm == 1) {
-+			/* Special mov32 for zext */
-+			emit_mov_i(ctx, hi(dst), 0);
-+		} else {
-+			emit_mov_r(ctx, lo(dst), lo(src));
-+			emit_zext_ver(ctx, dst);
-+		}
-+		break;
-+	/* dst = -dst */
-+	case BPF_ALU | BPF_NEG:
-+		emit_alu_i(ctx, lo(dst), 0, BPF_NEG);
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = dst & imm */
-+	/* dst = dst | imm */
-+	/* dst = dst ^ imm */
-+	/* dst = dst << imm */
-+	/* dst = dst >> imm */
-+	/* dst = dst >> imm (arithmetic) */
-+	/* dst = dst + imm */
-+	/* dst = dst - imm */
-+	/* dst = dst * imm */
-+	/* dst = dst / imm */
-+	/* dst = dst % imm */
-+	case BPF_ALU | BPF_OR | BPF_K:
-+	case BPF_ALU | BPF_AND | BPF_K:
-+	case BPF_ALU | BPF_XOR | BPF_K:
-+	case BPF_ALU | BPF_LSH | BPF_K:
-+	case BPF_ALU | BPF_RSH | BPF_K:
-+	case BPF_ALU | BPF_ARSH | BPF_K:
-+	case BPF_ALU | BPF_ADD | BPF_K:
-+	case BPF_ALU | BPF_SUB | BPF_K:
-+	case BPF_ALU | BPF_MUL | BPF_K:
-+	case BPF_ALU | BPF_DIV | BPF_K:
-+	case BPF_ALU | BPF_MOD | BPF_K:
-+		if (!valid_alu_i(BPF_OP(code), imm)) {
-+			emit_mov_i(ctx, MIPS_R_T6, imm);
-+			emit_alu_r(ctx, lo(dst), MIPS_R_T6, BPF_OP(code));
-+		} else if (rewrite_alu_i(BPF_OP(code), imm, &alu, &val)) {
-+			emit_alu_i(ctx, lo(dst), val, alu);
-+		}
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = dst & src */
-+	/* dst = dst | src */
-+	/* dst = dst ^ src */
-+	/* dst = dst << src */
-+	/* dst = dst >> src */
-+	/* dst = dst >> src (arithmetic) */
-+	/* dst = dst + src */
-+	/* dst = dst - src */
-+	/* dst = dst * src */
-+	/* dst = dst / src */
-+	/* dst = dst % src */
-+	case BPF_ALU | BPF_AND | BPF_X:
-+	case BPF_ALU | BPF_OR | BPF_X:
-+	case BPF_ALU | BPF_XOR | BPF_X:
-+	case BPF_ALU | BPF_LSH | BPF_X:
-+	case BPF_ALU | BPF_RSH | BPF_X:
-+	case BPF_ALU | BPF_ARSH | BPF_X:
-+	case BPF_ALU | BPF_ADD | BPF_X:
-+	case BPF_ALU | BPF_SUB | BPF_X:
-+	case BPF_ALU | BPF_MUL | BPF_X:
-+	case BPF_ALU | BPF_DIV | BPF_X:
-+	case BPF_ALU | BPF_MOD | BPF_X:
-+		emit_alu_r(ctx, lo(dst), lo(src), BPF_OP(code));
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = imm (64-bit) */
-+	case BPF_ALU64 | BPF_MOV | BPF_K:
-+		emit_mov_se_i64(ctx, dst, imm);
-+		break;
-+	/* dst = src (64-bit) */
-+	case BPF_ALU64 | BPF_MOV | BPF_X:
-+		emit_mov_r(ctx, lo(dst), lo(src));
-+		emit_mov_r(ctx, hi(dst), hi(src));
-+		break;
-+	/* dst = -dst (64-bit) */
-+	case BPF_ALU64 | BPF_NEG:
-+		emit_neg_i64(ctx, dst);
-+		break;
-+	/* dst = dst & imm (64-bit) */
-+	case BPF_ALU64 | BPF_AND | BPF_K:
-+		emit_alu_i64(ctx, dst, imm, BPF_OP(code));
-+		break;
-+	/* dst = dst | imm (64-bit) */
-+	/* dst = dst ^ imm (64-bit) */
-+	/* dst = dst + imm (64-bit) */
-+	/* dst = dst - imm (64-bit) */
-+	case BPF_ALU64 | BPF_OR | BPF_K:
-+	case BPF_ALU64 | BPF_XOR | BPF_K:
-+	case BPF_ALU64 | BPF_ADD | BPF_K:
-+	case BPF_ALU64 | BPF_SUB | BPF_K:
-+		if (imm)
-+			emit_alu_i64(ctx, dst, imm, BPF_OP(code));
-+		break;
-+	/* dst = dst << imm (64-bit) */
-+	/* dst = dst >> imm (64-bit) */
-+	/* dst = dst >> imm (64-bit, arithmetic) */
-+	case BPF_ALU64 | BPF_LSH | BPF_K:
-+	case BPF_ALU64 | BPF_RSH | BPF_K:
-+	case BPF_ALU64 | BPF_ARSH | BPF_K:
-+		if (imm)
-+			emit_shift_i64(ctx, dst, imm, BPF_OP(code));
-+		break;
-+	/* dst = dst * imm (64-bit) */
-+	case BPF_ALU64 | BPF_MUL | BPF_K:
-+		emit_mul_i64(ctx, dst, imm);
-+		break;
-+	/* dst = dst / imm (64-bit) */
-+	/* dst = dst % imm (64-bit) */
-+	case BPF_ALU64 | BPF_DIV | BPF_K:
-+	case BPF_ALU64 | BPF_MOD | BPF_K:
-+		/*
-+		 * Sign-extend the immediate value into a temporary register,
-+		 * and then do the operation on this register.
-+		 */
-+		emit_mov_se_i64(ctx, tmp, imm);
-+		emit_divmod_r64(ctx, dst, tmp, BPF_OP(code));
-+		break;
-+	/* dst = dst & src (64-bit) */
-+	/* dst = dst | src (64-bit) */
-+	/* dst = dst ^ src (64-bit) */
-+	/* dst = dst + src (64-bit) */
-+	/* dst = dst - src (64-bit) */
-+	case BPF_ALU64 | BPF_AND | BPF_X:
-+	case BPF_ALU64 | BPF_OR | BPF_X:
-+	case BPF_ALU64 | BPF_XOR | BPF_X:
-+	case BPF_ALU64 | BPF_ADD | BPF_X:
-+	case BPF_ALU64 | BPF_SUB | BPF_X:
-+		emit_alu_r64(ctx, dst, src, BPF_OP(code));
-+		break;
-+	/* dst = dst << src (64-bit) */
-+	/* dst = dst >> src (64-bit) */
-+	/* dst = dst >> src (64-bit, arithmetic) */
-+	case BPF_ALU64 | BPF_LSH | BPF_X:
-+	case BPF_ALU64 | BPF_RSH | BPF_X:
-+	case BPF_ALU64 | BPF_ARSH | BPF_X:
-+		emit_shift_r64(ctx, dst, lo(src), BPF_OP(code));
-+		break;
-+	/* dst = dst * src (64-bit) */
-+	case BPF_ALU64 | BPF_MUL | BPF_X:
-+		emit_mul_r64(ctx, dst, src);
-+		break;
-+	/* dst = dst / src (64-bit) */
-+	/* dst = dst % src (64-bit) */
-+	case BPF_ALU64 | BPF_DIV | BPF_X:
-+	case BPF_ALU64 | BPF_MOD | BPF_X:
-+		emit_divmod_r64(ctx, dst, src, BPF_OP(code));
-+		break;
-+	/* dst = htole(dst) */
-+	/* dst = htobe(dst) */
-+	case BPF_ALU | BPF_END | BPF_FROM_LE:
-+	case BPF_ALU | BPF_END | BPF_FROM_BE:
-+		if (BPF_SRC(code) ==
-+#ifdef __BIG_ENDIAN
-+		    BPF_FROM_LE
-+#else
-+		    BPF_FROM_BE
-+#endif
-+		    )
-+			emit_bswap_r64(ctx, dst, imm);
-+		else
-+			emit_trunc_r64(ctx, dst, imm);
-+		break;
-+	/* dst = imm64 */
-+	case BPF_LD | BPF_IMM | BPF_DW:
-+		emit_mov_i(ctx, lo(dst), imm);
-+		emit_mov_i(ctx, hi(dst), insn[1].imm);
-+		return 1;
-+	/* LDX: dst = *(size *)(src + off) */
-+	case BPF_LDX | BPF_MEM | BPF_W:
-+	case BPF_LDX | BPF_MEM | BPF_H:
-+	case BPF_LDX | BPF_MEM | BPF_B:
-+	case BPF_LDX | BPF_MEM | BPF_DW:
-+		emit_ldx(ctx, dst, lo(src), off, BPF_SIZE(code));
-+		break;
-+	/* ST: *(size *)(dst + off) = imm */
-+	case BPF_ST | BPF_MEM | BPF_W:
-+	case BPF_ST | BPF_MEM | BPF_H:
-+	case BPF_ST | BPF_MEM | BPF_B:
-+	case BPF_ST | BPF_MEM | BPF_DW:
-+		switch (BPF_SIZE(code)) {
-+		case BPF_DW:
-+			/* Sign-extend immediate value into temporary reg */
-+			emit_mov_se_i64(ctx, tmp, imm);
-+			break;
-+		case BPF_W:
-+		case BPF_H:
-+		case BPF_B:
-+			emit_mov_i(ctx, lo(tmp), imm);
-+			break;
-+		}
-+		emit_stx(ctx, lo(dst), tmp, off, BPF_SIZE(code));
-+		break;
-+	/* STX: *(size *)(dst + off) = src */
-+	case BPF_STX | BPF_MEM | BPF_W:
-+	case BPF_STX | BPF_MEM | BPF_H:
-+	case BPF_STX | BPF_MEM | BPF_B:
-+	case BPF_STX | BPF_MEM | BPF_DW:
-+		emit_stx(ctx, lo(dst), src, off, BPF_SIZE(code));
-+		break;
-+	/* Speculation barrier */
-+	case BPF_ST | BPF_NOSPEC:
-+		break;
-+	/* Atomics */
-+	case BPF_STX | BPF_XADD | BPF_W:
-+		switch (imm) {
-+		case BPF_ADD:
-+		case BPF_AND:
-+		case BPF_OR:
-+		case BPF_XOR:
-+			if (cpu_has_llsc)
-+				emit_atomic_r(ctx, lo(dst), lo(src), off, imm);
-+			else /* Non-ll/sc fallback */
-+				emit_atomic_r32(ctx, lo(dst), lo(src),
-+						off, imm);
-+			break;
-+		default:
-+			goto notyet;
-+		}
-+		break;
-+	/* Atomics (64-bit) */
-+	case BPF_STX | BPF_XADD | BPF_DW:
-+		switch (imm) {
-+		case BPF_ADD:
-+		case BPF_AND:
-+		case BPF_OR:
-+		case BPF_XOR:
-+			emit_atomic_r64(ctx, lo(dst), src, off, imm);
-+			break;
-+		default:
-+			goto notyet;
-+		}
-+		break;
-+	/* PC += off if dst == src */
-+	/* PC += off if dst != src */
-+	/* PC += off if dst & src */
-+	/* PC += off if dst > src */
-+	/* PC += off if dst >= src */
-+	/* PC += off if dst < src */
-+	/* PC += off if dst <= src */
-+	/* PC += off if dst > src (signed) */
-+	/* PC += off if dst >= src (signed) */
-+	/* PC += off if dst < src (signed) */
-+	/* PC += off if dst <= src (signed) */
-+	case BPF_JMP32 | BPF_JEQ | BPF_X:
-+	case BPF_JMP32 | BPF_JNE | BPF_X:
-+	case BPF_JMP32 | BPF_JSET | BPF_X:
-+	case BPF_JMP32 | BPF_JGT | BPF_X:
-+	case BPF_JMP32 | BPF_JGE | BPF_X:
-+	case BPF_JMP32 | BPF_JLT | BPF_X:
-+	case BPF_JMP32 | BPF_JLE | BPF_X:
-+	case BPF_JMP32 | BPF_JSGT | BPF_X:
-+	case BPF_JMP32 | BPF_JSGE | BPF_X:
-+	case BPF_JMP32 | BPF_JSLT | BPF_X:
-+	case BPF_JMP32 | BPF_JSLE | BPF_X:
-+		if (off == 0)
-+			break;
-+		setup_jmp_r(ctx, dst == src, BPF_OP(code), off, &jmp, &rel);
-+		emit_jmp_r(ctx, lo(dst), lo(src), rel, jmp);
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off if dst == imm */
-+	/* PC += off if dst != imm */
-+	/* PC += off if dst & imm */
-+	/* PC += off if dst > imm */
-+	/* PC += off if dst >= imm */
-+	/* PC += off if dst < imm */
-+	/* PC += off if dst <= imm */
-+	/* PC += off if dst > imm (signed) */
-+	/* PC += off if dst >= imm (signed) */
-+	/* PC += off if dst < imm (signed) */
-+	/* PC += off if dst <= imm (signed) */
-+	case BPF_JMP32 | BPF_JEQ | BPF_K:
-+	case BPF_JMP32 | BPF_JNE | BPF_K:
-+	case BPF_JMP32 | BPF_JSET | BPF_K:
-+	case BPF_JMP32 | BPF_JGT | BPF_K:
-+	case BPF_JMP32 | BPF_JGE | BPF_K:
-+	case BPF_JMP32 | BPF_JLT | BPF_K:
-+	case BPF_JMP32 | BPF_JLE | BPF_K:
-+	case BPF_JMP32 | BPF_JSGT | BPF_K:
-+	case BPF_JMP32 | BPF_JSGE | BPF_K:
-+	case BPF_JMP32 | BPF_JSLT | BPF_K:
-+	case BPF_JMP32 | BPF_JSLE | BPF_K:
-+		if (off == 0)
-+			break;
-+		setup_jmp_i(ctx, imm, 32, BPF_OP(code), off, &jmp, &rel);
-+		if (valid_jmp_i(jmp, imm)) {
-+			emit_jmp_i(ctx, lo(dst), imm, rel, jmp);
-+		} else {
-+			/* Move large immediate to register */
-+			emit_mov_i(ctx, MIPS_R_T6, imm);
-+			emit_jmp_r(ctx, lo(dst), MIPS_R_T6, rel, jmp);
-+		}
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off if dst == src */
-+	/* PC += off if dst != src */
-+	/* PC += off if dst & src */
-+	/* PC += off if dst > src */
-+	/* PC += off if dst >= src */
-+	/* PC += off if dst < src */
-+	/* PC += off if dst <= src */
-+	/* PC += off if dst > src (signed) */
-+	/* PC += off if dst >= src (signed) */
-+	/* PC += off if dst < src (signed) */
-+	/* PC += off if dst <= src (signed) */
-+	case BPF_JMP | BPF_JEQ | BPF_X:
-+	case BPF_JMP | BPF_JNE | BPF_X:
-+	case BPF_JMP | BPF_JSET | BPF_X:
-+	case BPF_JMP | BPF_JGT | BPF_X:
-+	case BPF_JMP | BPF_JGE | BPF_X:
-+	case BPF_JMP | BPF_JLT | BPF_X:
-+	case BPF_JMP | BPF_JLE | BPF_X:
-+	case BPF_JMP | BPF_JSGT | BPF_X:
-+	case BPF_JMP | BPF_JSGE | BPF_X:
-+	case BPF_JMP | BPF_JSLT | BPF_X:
-+	case BPF_JMP | BPF_JSLE | BPF_X:
-+		if (off == 0)
-+			break;
-+		setup_jmp_r(ctx, dst == src, BPF_OP(code), off, &jmp, &rel);
-+		emit_jmp_r64(ctx, dst, src, rel, jmp);
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off if dst == imm */
-+	/* PC += off if dst != imm */
-+	/* PC += off if dst & imm */
-+	/* PC += off if dst > imm */
-+	/* PC += off if dst >= imm */
-+	/* PC += off if dst < imm */
-+	/* PC += off if dst <= imm */
-+	/* PC += off if dst > imm (signed) */
-+	/* PC += off if dst >= imm (signed) */
-+	/* PC += off if dst < imm (signed) */
-+	/* PC += off if dst <= imm (signed) */
-+	case BPF_JMP | BPF_JEQ | BPF_K:
-+	case BPF_JMP | BPF_JNE | BPF_K:
-+	case BPF_JMP | BPF_JSET | BPF_K:
-+	case BPF_JMP | BPF_JGT | BPF_K:
-+	case BPF_JMP | BPF_JGE | BPF_K:
-+	case BPF_JMP | BPF_JLT | BPF_K:
-+	case BPF_JMP | BPF_JLE | BPF_K:
-+	case BPF_JMP | BPF_JSGT | BPF_K:
-+	case BPF_JMP | BPF_JSGE | BPF_K:
-+	case BPF_JMP | BPF_JSLT | BPF_K:
-+	case BPF_JMP | BPF_JSLE | BPF_K:
-+		if (off == 0)
-+			break;
-+		setup_jmp_i(ctx, imm, 64, BPF_OP(code), off, &jmp, &rel);
-+		emit_jmp_i64(ctx, dst, imm, rel, jmp);
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off */
-+	case BPF_JMP | BPF_JA:
-+		if (off == 0)
-+			break;
-+		if (emit_ja(ctx, off) < 0)
-+			goto toofar;
-+		break;
-+	/* Tail call */
-+	case BPF_JMP | BPF_TAIL_CALL:
-+		if (emit_tail_call(ctx) < 0)
-+			goto invalid;
-+		break;
-+	/* Function call */
-+	case BPF_JMP | BPF_CALL:
-+		if (emit_call(ctx, insn) < 0)
-+			goto invalid;
-+		break;
-+	/* Function return */
-+	case BPF_JMP | BPF_EXIT:
-+		/*
-+		 * Optimization: when last instruction is EXIT
-+		 * simply continue to epilogue.
-+		 */
-+		if (ctx->bpf_index == ctx->program->len - 1)
-+			break;
-+		if (emit_exit(ctx) < 0)
-+			goto toofar;
-+		break;
-+
-+	default:
-+invalid:
-+		pr_err_once("unknown opcode %02x\n", code);
-+		return -EINVAL;
-+notyet:
-+		pr_info_once("*** NOT YET: opcode %02x ***\n", code);
-+		return -EFAULT;
-+toofar:
-+		pr_info_once("*** TOO FAR: jump at %u opcode %02x ***\n",
-+			     ctx->bpf_index, code);
-+		return -E2BIG;
-+	}
-+	return 0;
-+}
diff --git a/target/linux/generic/backport-5.4/071-v5.16-03-mips-bpf-Add-new-eBPF-JIT-for-64-bit-MIPS.patch b/target/linux/generic/backport-5.4/071-v5.16-03-mips-bpf-Add-new-eBPF-JIT-for-64-bit-MIPS.patch
deleted file mode 100644
index 38b46c0b76..0000000000
--- a/target/linux/generic/backport-5.4/071-v5.16-03-mips-bpf-Add-new-eBPF-JIT-for-64-bit-MIPS.patch
+++ /dev/null
@@ -1,1005 +0,0 @@
-From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Date: Tue, 5 Oct 2021 18:54:05 +0200
-Subject: [PATCH] mips: bpf: Add new eBPF JIT for 64-bit MIPS
-
-This is an implementation on of an eBPF JIT for 64-bit MIPS III-V and
-MIPS64r1-r6. It uses the same framework introduced by the 32-bit JIT.
-
-Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
----
- create mode 100644 arch/mips/net/bpf_jit_comp64.c
-
---- /dev/null
-+++ b/arch/mips/net/bpf_jit_comp64.c
-@@ -0,0 +1,991 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Just-In-Time compiler for eBPF bytecode on MIPS.
-+ * Implementation of JIT functions for 64-bit CPUs.
-+ *
-+ * Copyright (c) 2021 Anyfi Networks AB.
-+ * Author: Johan Almbladh <johan.almbladh@gmail.com>
-+ *
-+ * Based on code and ideas from
-+ * Copyright (c) 2017 Cavium, Inc.
-+ * Copyright (c) 2017 Shubham Bansal <illusionist.neo@gmail.com>
-+ * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com>
-+ */
-+
-+#include <linux/errno.h>
-+#include <linux/filter.h>
-+#include <linux/bpf.h>
-+#include <asm/cpu-features.h>
-+#include <asm/isa-rev.h>
-+#include <asm/uasm.h>
-+
-+#include "bpf_jit_comp.h"
-+
-+/* MIPS t0-t3 are not available in the n64 ABI */
-+#undef MIPS_R_T0
-+#undef MIPS_R_T1
-+#undef MIPS_R_T2
-+#undef MIPS_R_T3
-+
-+/* Stack is 16-byte aligned in n64 ABI */
-+#define MIPS_STACK_ALIGNMENT 16
-+
-+/* Extra 64-bit eBPF registers used by JIT */
-+#define JIT_REG_TC (MAX_BPF_JIT_REG + 0)
-+#define JIT_REG_ZX (MAX_BPF_JIT_REG + 1)
-+
-+/* Number of prologue bytes to skip when doing a tail call */
-+#define JIT_TCALL_SKIP 4
-+
-+/* Callee-saved CPU registers that the JIT must preserve */
-+#define JIT_CALLEE_REGS   \
-+	(BIT(MIPS_R_S0) | \
-+	 BIT(MIPS_R_S1) | \
-+	 BIT(MIPS_R_S2) | \
-+	 BIT(MIPS_R_S3) | \
-+	 BIT(MIPS_R_S4) | \
-+	 BIT(MIPS_R_S5) | \
-+	 BIT(MIPS_R_S6) | \
-+	 BIT(MIPS_R_S7) | \
-+	 BIT(MIPS_R_GP) | \
-+	 BIT(MIPS_R_FP) | \
-+	 BIT(MIPS_R_RA))
-+
-+/* Caller-saved CPU registers available for JIT use */
-+#define JIT_CALLER_REGS	  \
-+	(BIT(MIPS_R_A5) | \
-+	 BIT(MIPS_R_A6) | \
-+	 BIT(MIPS_R_A7))
-+/*
-+ * Mapping of 64-bit eBPF registers to 64-bit native MIPS registers.
-+ * MIPS registers t4 - t7 may be used by the JIT as temporary registers.
-+ * MIPS registers t8 - t9 are reserved for single-register common functions.
-+ */
-+static const u8 bpf2mips64[] = {
-+	/* Return value from in-kernel function, and exit value from eBPF */
-+	[BPF_REG_0] = MIPS_R_V0,
-+	/* Arguments from eBPF program to in-kernel function */
-+	[BPF_REG_1] = MIPS_R_A0,
-+	[BPF_REG_2] = MIPS_R_A1,
-+	[BPF_REG_3] = MIPS_R_A2,
-+	[BPF_REG_4] = MIPS_R_A3,
-+	[BPF_REG_5] = MIPS_R_A4,
-+	/* Callee-saved registers that in-kernel function will preserve */
-+	[BPF_REG_6] = MIPS_R_S0,
-+	[BPF_REG_7] = MIPS_R_S1,
-+	[BPF_REG_8] = MIPS_R_S2,
-+	[BPF_REG_9] = MIPS_R_S3,
-+	/* Read-only frame pointer to access the eBPF stack */
-+	[BPF_REG_FP] = MIPS_R_FP,
-+	/* Temporary register for blinding constants */
-+	[BPF_REG_AX] = MIPS_R_AT,
-+	/* Tail call count register, caller-saved */
-+	[JIT_REG_TC] = MIPS_R_A5,
-+	/* Constant for register zero-extension */
-+	[JIT_REG_ZX] = MIPS_R_V1,
-+};
-+
-+/*
-+ * MIPS 32-bit operations on 64-bit registers generate a sign-extended
-+ * result. However, the eBPF ISA mandates zero-extension, so we rely on the
-+ * verifier to add that for us (emit_zext_ver). In addition, ALU arithmetic
-+ * operations, right shift and byte swap require properly sign-extended
-+ * operands or the result is unpredictable. We emit explicit sign-extensions
-+ * in those cases.
-+ */
-+
-+/* Sign extension */
-+static void emit_sext(struct jit_context *ctx, u8 dst, u8 src)
-+{
-+	emit(ctx, sll, dst, src, 0);
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Zero extension */
-+static void emit_zext(struct jit_context *ctx, u8 dst)
-+{
-+	if (cpu_has_mips64r2 || cpu_has_mips64r6) {
-+		emit(ctx, dinsu, dst, MIPS_R_ZERO, 32, 32);
-+	} else {
-+		emit(ctx, and, dst, dst, bpf2mips64[JIT_REG_ZX]);
-+		access_reg(ctx, JIT_REG_ZX); /* We need the ZX register */
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Zero extension, if verifier does not do it for us  */
-+static void emit_zext_ver(struct jit_context *ctx, u8 dst)
-+{
-+	if (!ctx->program->aux->verifier_zext)
-+		emit_zext(ctx, dst);
-+}
-+
-+/* dst = imm (64-bit) */
-+static void emit_mov_i64(struct jit_context *ctx, u8 dst, u64 imm64)
-+{
-+	if (imm64 >= 0xffffffffffff8000ULL || imm64 < 0x8000ULL) {
-+		emit(ctx, daddiu, dst, MIPS_R_ZERO, (s16)imm64);
-+	} else if (imm64 >= 0xffffffff80000000ULL ||
-+		   (imm64 < 0x80000000 && imm64 > 0xffff)) {
-+		emit(ctx, lui, dst, (s16)(imm64 >> 16));
-+		emit(ctx, ori, dst, dst, (u16)imm64 & 0xffff);
-+	} else {
-+		u8 acc = MIPS_R_ZERO;
-+		int k;
-+
-+		for (k = 0; k < 4; k++) {
-+			u16 half = imm64 >> (48 - 16 * k);
-+
-+			if (acc == dst)
-+				emit(ctx, dsll, dst, dst, 16);
-+
-+			if (half) {
-+				emit(ctx, ori, dst, acc, half);
-+				acc = dst;
-+			}
-+		}
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* ALU immediate operation (64-bit) */
-+static void emit_alu_i64(struct jit_context *ctx, u8 dst, s32 imm, u8 op)
-+{
-+	switch (BPF_OP(op)) {
-+	/* dst = dst | imm */
-+	case BPF_OR:
-+		emit(ctx, ori, dst, dst, (u16)imm);
-+		break;
-+	/* dst = dst ^ imm */
-+	case BPF_XOR:
-+		emit(ctx, xori, dst, dst, (u16)imm);
-+		break;
-+	/* dst = -dst */
-+	case BPF_NEG:
-+		emit(ctx, dsubu, dst, MIPS_R_ZERO, dst);
-+		break;
-+	/* dst = dst << imm */
-+	case BPF_LSH:
-+		emit(ctx, dsll_safe, dst, dst, imm);
-+		break;
-+	/* dst = dst >> imm */
-+	case BPF_RSH:
-+		emit(ctx, dsrl_safe, dst, dst, imm);
-+		break;
-+	/* dst = dst >> imm (arithmetic) */
-+	case BPF_ARSH:
-+		emit(ctx, dsra_safe, dst, dst, imm);
-+		break;
-+	/* dst = dst + imm */
-+	case BPF_ADD:
-+		emit(ctx, daddiu, dst, dst, imm);
-+		break;
-+	/* dst = dst - imm */
-+	case BPF_SUB:
-+		emit(ctx, daddiu, dst, dst, -imm);
-+		break;
-+	default:
-+		/* Width-generic operations */
-+		emit_alu_i(ctx, dst, imm, op);
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* ALU register operation (64-bit) */
-+static void emit_alu_r64(struct jit_context *ctx, u8 dst, u8 src, u8 op)
-+{
-+	switch (BPF_OP(op)) {
-+	/* dst = dst << src */
-+	case BPF_LSH:
-+		emit(ctx, dsllv, dst, dst, src);
-+		break;
-+	/* dst = dst >> src */
-+	case BPF_RSH:
-+		emit(ctx, dsrlv, dst, dst, src);
-+		break;
-+	/* dst = dst >> src (arithmetic) */
-+	case BPF_ARSH:
-+		emit(ctx, dsrav, dst, dst, src);
-+		break;
-+	/* dst = dst + src */
-+	case BPF_ADD:
-+		emit(ctx, daddu, dst, dst, src);
-+		break;
-+	/* dst = dst - src */
-+	case BPF_SUB:
-+		emit(ctx, dsubu, dst, dst, src);
-+		break;
-+	/* dst = dst * src */
-+	case BPF_MUL:
-+		if (cpu_has_mips64r6) {
-+			emit(ctx, dmulu, dst, dst, src);
-+		} else {
-+			emit(ctx, dmultu, dst, src);
-+			emit(ctx, mflo, dst);
-+		}
-+		break;
-+	/* dst = dst / src */
-+	case BPF_DIV:
-+		if (cpu_has_mips64r6) {
-+			emit(ctx, ddivu_r6, dst, dst, src);
-+		} else {
-+			emit(ctx, ddivu, dst, src);
-+			emit(ctx, mflo, dst);
-+		}
-+		break;
-+	/* dst = dst % src */
-+	case BPF_MOD:
-+		if (cpu_has_mips64r6) {
-+			emit(ctx, dmodu, dst, dst, src);
-+		} else {
-+			emit(ctx, ddivu, dst, src);
-+			emit(ctx, mfhi, dst);
-+		}
-+		break;
-+	default:
-+		/* Width-generic operations */
-+		emit_alu_r(ctx, dst, src, op);
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Swap sub words in a register double word */
-+static void emit_swap_r64(struct jit_context *ctx, u8 dst, u8 mask, u32 bits)
-+{
-+	u8 tmp = MIPS_R_T9;
-+
-+	emit(ctx, and, tmp, dst, mask);  /* tmp = dst & mask  */
-+	emit(ctx, dsll, tmp, tmp, bits); /* tmp = tmp << bits */
-+	emit(ctx, dsrl, dst, dst, bits); /* dst = dst >> bits */
-+	emit(ctx, and, dst, dst, mask);  /* dst = dst & mask  */
-+	emit(ctx, or, dst, dst, tmp);    /* dst = dst | tmp   */
-+}
-+
-+/* Swap bytes and truncate a register double word, word or half word */
-+static void emit_bswap_r64(struct jit_context *ctx, u8 dst, u32 width)
-+{
-+	switch (width) {
-+	/* Swap bytes in a double word */
-+	case 64:
-+		if (cpu_has_mips64r2 || cpu_has_mips64r6) {
-+			emit(ctx, dsbh, dst, dst);
-+			emit(ctx, dshd, dst, dst);
-+		} else {
-+			u8 t1 = MIPS_R_T6;
-+			u8 t2 = MIPS_R_T7;
-+
-+			emit(ctx, dsll32, t2, dst, 0);  /* t2 = dst << 32    */
-+			emit(ctx, dsrl32, dst, dst, 0); /* dst = dst >> 32   */
-+			emit(ctx, or, dst, dst, t2);    /* dst = dst | t2    */
-+
-+			emit(ctx, ori, t2, MIPS_R_ZERO, 0xffff);
-+			emit(ctx, dsll32, t1, t2, 0);   /* t1 = t2 << 32     */
-+			emit(ctx, or, t1, t1, t2);      /* t1 = t1 | t2      */
-+			emit_swap_r64(ctx, dst, t1, 16);/* dst = swap16(dst) */
-+
-+			emit(ctx, lui, t2, 0xff);       /* t2 = 0x00ff0000   */
-+			emit(ctx, ori, t2, t2, 0xff);   /* t2 = t2 | 0x00ff  */
-+			emit(ctx, dsll32, t1, t2, 0);   /* t1 = t2 << 32     */
-+			emit(ctx, or, t1, t1, t2);      /* t1 = t1 | t2      */
-+			emit_swap_r64(ctx, dst, t1, 8); /* dst = swap8(dst)  */
-+		}
-+		break;
-+	/* Swap bytes in a half word */
-+	/* Swap bytes in a word */
-+	case 32:
-+	case 16:
-+		emit_sext(ctx, dst, dst);
-+		emit_bswap_r(ctx, dst, width);
-+		if (cpu_has_mips64r2 || cpu_has_mips64r6)
-+			emit_zext(ctx, dst);
-+		break;
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Truncate a register double word, word or half word */
-+static void emit_trunc_r64(struct jit_context *ctx, u8 dst, u32 width)
-+{
-+	switch (width) {
-+	case 64:
-+		break;
-+	/* Zero-extend a word */
-+	case 32:
-+		emit_zext(ctx, dst);
-+		break;
-+	/* Zero-extend a half word */
-+	case 16:
-+		emit(ctx, andi, dst, dst, 0xffff);
-+		break;
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Load operation: dst = *(size*)(src + off) */
-+static void emit_ldx(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 size)
-+{
-+	switch (size) {
-+	/* Load a byte */
-+	case BPF_B:
-+		emit(ctx, lbu, dst, off, src);
-+		break;
-+	/* Load a half word */
-+	case BPF_H:
-+		emit(ctx, lhu, dst, off, src);
-+		break;
-+	/* Load a word */
-+	case BPF_W:
-+		emit(ctx, lwu, dst, off, src);
-+		break;
-+	/* Load a double word */
-+	case BPF_DW:
-+		emit(ctx, ld, dst, off, src);
-+		break;
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Store operation: *(size *)(dst + off) = src */
-+static void emit_stx(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 size)
-+{
-+	switch (size) {
-+	/* Store a byte */
-+	case BPF_B:
-+		emit(ctx, sb, src, off, dst);
-+		break;
-+	/* Store a half word */
-+	case BPF_H:
-+		emit(ctx, sh, src, off, dst);
-+		break;
-+	/* Store a word */
-+	case BPF_W:
-+		emit(ctx, sw, src, off, dst);
-+		break;
-+	/* Store a double word */
-+	case BPF_DW:
-+		emit(ctx, sd, src, off, dst);
-+		break;
-+	}
-+}
-+
-+/* Atomic read-modify-write */
-+static void emit_atomic_r64(struct jit_context *ctx,
-+			    u8 dst, u8 src, s16 off, u8 code)
-+{
-+	u8 t1 = MIPS_R_T6;
-+	u8 t2 = MIPS_R_T7;
-+
-+	emit(ctx, lld, t1, off, dst);
-+	switch (code) {
-+	case BPF_ADD:
-+		emit(ctx, daddu, t2, t1, src);
-+		break;
-+	case BPF_AND:
-+		emit(ctx, and, t2, t1, src);
-+		break;
-+	case BPF_OR:
-+		emit(ctx, or, t2, t1, src);
-+		break;
-+	case BPF_XOR:
-+		emit(ctx, xor, t2, t1, src);
-+		break;
-+	}
-+	emit(ctx, scd, t2, off, dst);
-+	emit(ctx, beqz, t2, -16);
-+	emit(ctx, nop); /* Delay slot */
-+}
-+
-+/* Function call */
-+static int emit_call(struct jit_context *ctx, const struct bpf_insn *insn)
-+{
-+	u8 zx = bpf2mips64[JIT_REG_ZX];
-+	u8 tmp = MIPS_R_T6;
-+	bool fixed;
-+	u64 addr;
-+
-+	/* Decode the call address */
-+	if (bpf_jit_get_func_addr(ctx->program, insn, false,
-+				  &addr, &fixed) < 0)
-+		return -1;
-+	if (!fixed)
-+		return -1;
-+
-+	/* Push caller-saved registers on stack */
-+	push_regs(ctx, ctx->clobbered & JIT_CALLER_REGS, 0, 0);
-+
-+	/* Emit function call */
-+	emit_mov_i64(ctx, tmp, addr);
-+	emit(ctx, jalr, MIPS_R_RA, tmp);
-+	emit(ctx, nop); /* Delay slot */
-+
-+	/* Restore caller-saved registers */
-+	pop_regs(ctx, ctx->clobbered & JIT_CALLER_REGS, 0, 0);
-+
-+	/* Re-initialize the JIT zero-extension register if accessed */
-+	if (ctx->accessed & BIT(JIT_REG_ZX)) {
-+		emit(ctx, daddiu, zx, MIPS_R_ZERO, -1);
-+		emit(ctx, dsrl32, zx, zx, 0);
-+	}
-+
-+	clobber_reg(ctx, MIPS_R_RA);
-+	clobber_reg(ctx, MIPS_R_V0);
-+	clobber_reg(ctx, MIPS_R_V1);
-+	return 0;
-+}
-+
-+/* Function tail call */
-+static int emit_tail_call(struct jit_context *ctx)
-+{
-+	u8 ary = bpf2mips64[BPF_REG_2];
-+	u8 ind = bpf2mips64[BPF_REG_3];
-+	u8 tcc = bpf2mips64[JIT_REG_TC];
-+	u8 tmp = MIPS_R_T6;
-+	int off;
-+
-+	/*
-+	 * Tail call:
-+	 * eBPF R1 - function argument (context ptr), passed in a0-a1
-+	 * eBPF R2 - ptr to object with array of function entry points
-+	 * eBPF R3 - array index of function to be called
-+	 */
-+
-+	/* if (ind >= ary->map.max_entries) goto out */
-+	off = offsetof(struct bpf_array, map.max_entries);
-+	if (off > 0x7fff)
-+		return -1;
-+	emit(ctx, lwu, tmp, off, ary);            /* tmp = ary->map.max_entrs*/
-+	emit(ctx, sltu, tmp, ind, tmp);           /* tmp = ind < t1          */
-+	emit(ctx, beqz, tmp, get_offset(ctx, 1)); /* PC += off(1) if tmp == 0*/
-+
-+	/* if (--TCC < 0) goto out */
-+	emit(ctx, daddiu, tcc, tcc, -1);          /* tcc-- (delay slot)      */
-+	emit(ctx, bltz, tcc, get_offset(ctx, 1)); /* PC += off(1) if tcc < 0 */
-+						  /* (next insn delay slot)  */
-+	/* prog = ary->ptrs[ind] */
-+	off = offsetof(struct bpf_array, ptrs);
-+	if (off > 0x7fff)
-+		return -1;
-+	emit(ctx, dsll, tmp, ind, 3);             /* tmp = ind << 3          */
-+	emit(ctx, daddu, tmp, tmp, ary);          /* tmp += ary              */
-+	emit(ctx, ld, tmp, off, tmp);             /* tmp = *(tmp + off)      */
-+
-+	/* if (prog == 0) goto out */
-+	emit(ctx, beqz, tmp, get_offset(ctx, 1)); /* PC += off(1) if tmp == 0*/
-+	emit(ctx, nop);                           /* Delay slot              */
-+
-+	/* func = prog->bpf_func + 8 (prologue skip offset) */
-+	off = offsetof(struct bpf_prog, bpf_func);
-+	if (off > 0x7fff)
-+		return -1;
-+	emit(ctx, ld, tmp, off, tmp);                /* tmp = *(tmp + off)   */
-+	emit(ctx, daddiu, tmp, tmp, JIT_TCALL_SKIP); /* tmp += skip (4)      */
-+
-+	/* goto func */
-+	build_epilogue(ctx, tmp);
-+	access_reg(ctx, JIT_REG_TC);
-+	return 0;
-+}
-+
-+/*
-+ * Stack frame layout for a JITed program (stack grows down).
-+ *
-+ * Higher address  : Previous stack frame      :
-+ *                 +===========================+  <--- MIPS sp before call
-+ *                 | Callee-saved registers,   |
-+ *                 | including RA and FP       |
-+ *                 +---------------------------+  <--- eBPF FP (MIPS fp)
-+ *                 | Local eBPF variables      |
-+ *                 | allocated by program      |
-+ *                 +---------------------------+
-+ *                 | Reserved for caller-saved |
-+ *                 | registers                 |
-+ * Lower address   +===========================+  <--- MIPS sp
-+ */
-+
-+/* Build program prologue to set up the stack and registers */
-+void build_prologue(struct jit_context *ctx)
-+{
-+	u8 fp = bpf2mips64[BPF_REG_FP];
-+	u8 tc = bpf2mips64[JIT_REG_TC];
-+	u8 zx = bpf2mips64[JIT_REG_ZX];
-+	int stack, saved, locals, reserved;
-+
-+	/*
-+	 * The first instruction initializes the tail call count register.
-+	 * On a tail call, the calling function jumps into the prologue
-+	 * after this instruction.
-+	 */
-+	emit(ctx, addiu, tc, MIPS_R_ZERO, min(MAX_TAIL_CALL_CNT + 1, 0xffff));
-+
-+	/* === Entry-point for tail calls === */
-+
-+	/*
-+	 * If the eBPF frame pointer and tail call count registers were
-+	 * accessed they must be preserved. Mark them as clobbered here
-+	 * to save and restore them on the stack as needed.
-+	 */
-+	if (ctx->accessed & BIT(BPF_REG_FP))
-+		clobber_reg(ctx, fp);
-+	if (ctx->accessed & BIT(JIT_REG_TC))
-+		clobber_reg(ctx, tc);
-+	if (ctx->accessed & BIT(JIT_REG_ZX))
-+		clobber_reg(ctx, zx);
-+
-+	/* Compute the stack space needed for callee-saved registers */
-+	saved = hweight32(ctx->clobbered & JIT_CALLEE_REGS) * sizeof(u64);
-+	saved = ALIGN(saved, MIPS_STACK_ALIGNMENT);
-+
-+	/* Stack space used by eBPF program local data */
-+	locals = ALIGN(ctx->program->aux->stack_depth, MIPS_STACK_ALIGNMENT);
-+
-+	/*
-+	 * If we are emitting function calls, reserve extra stack space for
-+	 * caller-saved registers needed by the JIT. The required space is
-+	 * computed automatically during resource usage discovery (pass 1).
-+	 */
-+	reserved = ctx->stack_used;
-+
-+	/* Allocate the stack frame */
-+	stack = ALIGN(saved + locals + reserved, MIPS_STACK_ALIGNMENT);
-+	if (stack)
-+		emit(ctx, daddiu, MIPS_R_SP, MIPS_R_SP, -stack);
-+
-+	/* Store callee-saved registers on stack */
-+	push_regs(ctx, ctx->clobbered & JIT_CALLEE_REGS, 0, stack - saved);
-+
-+	/* Initialize the eBPF frame pointer if accessed */
-+	if (ctx->accessed & BIT(BPF_REG_FP))
-+		emit(ctx, daddiu, fp, MIPS_R_SP, stack - saved);
-+
-+	/* Initialize the ePF JIT zero-extension register if accessed */
-+	if (ctx->accessed & BIT(JIT_REG_ZX)) {
-+		emit(ctx, daddiu, zx, MIPS_R_ZERO, -1);
-+		emit(ctx, dsrl32, zx, zx, 0);
-+	}
-+
-+	ctx->saved_size = saved;
-+	ctx->stack_size = stack;
-+}
-+
-+/* Build the program epilogue to restore the stack and registers */
-+void build_epilogue(struct jit_context *ctx, int dest_reg)
-+{
-+	/* Restore callee-saved registers from stack */
-+	pop_regs(ctx, ctx->clobbered & JIT_CALLEE_REGS, 0,
-+		 ctx->stack_size - ctx->saved_size);
-+
-+	/* Release the stack frame */
-+	if (ctx->stack_size)
-+		emit(ctx, daddiu, MIPS_R_SP, MIPS_R_SP, ctx->stack_size);
-+
-+	/* Jump to return address and sign-extend the 32-bit return value */
-+	emit(ctx, jr, dest_reg);
-+	emit(ctx, sll, MIPS_R_V0, MIPS_R_V0, 0); /* Delay slot */
-+}
-+
-+/* Build one eBPF instruction */
-+int build_insn(const struct bpf_insn *insn, struct jit_context *ctx)
-+{
-+	u8 dst = bpf2mips64[insn->dst_reg];
-+	u8 src = bpf2mips64[insn->src_reg];
-+	u8 code = insn->code;
-+	s16 off = insn->off;
-+	s32 imm = insn->imm;
-+	s32 val, rel;
-+	u8 alu, jmp;
-+
-+	switch (code) {
-+	/* ALU operations */
-+	/* dst = imm */
-+	case BPF_ALU | BPF_MOV | BPF_K:
-+		emit_mov_i(ctx, dst, imm);
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = src */
-+	case BPF_ALU | BPF_MOV | BPF_X:
-+		if (imm == 1) {
-+			/* Special mov32 for zext */
-+			emit_zext(ctx, dst);
-+		} else {
-+			emit_mov_r(ctx, dst, src);
-+			emit_zext_ver(ctx, dst);
-+		}
-+		break;
-+	/* dst = -dst */
-+	case BPF_ALU | BPF_NEG:
-+		emit_sext(ctx, dst, dst);
-+		emit_alu_i(ctx, dst, 0, BPF_NEG);
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = dst & imm */
-+	/* dst = dst | imm */
-+	/* dst = dst ^ imm */
-+	/* dst = dst << imm */
-+	case BPF_ALU | BPF_OR | BPF_K:
-+	case BPF_ALU | BPF_AND | BPF_K:
-+	case BPF_ALU | BPF_XOR | BPF_K:
-+	case BPF_ALU | BPF_LSH | BPF_K:
-+		if (!valid_alu_i(BPF_OP(code), imm)) {
-+			emit_mov_i(ctx, MIPS_R_T4, imm);
-+			emit_alu_r(ctx, dst, MIPS_R_T4, BPF_OP(code));
-+		} else if (rewrite_alu_i(BPF_OP(code), imm, &alu, &val)) {
-+			emit_alu_i(ctx, dst, val, alu);
-+		}
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = dst >> imm */
-+	/* dst = dst >> imm (arithmetic) */
-+	/* dst = dst + imm */
-+	/* dst = dst - imm */
-+	/* dst = dst * imm */
-+	/* dst = dst / imm */
-+	/* dst = dst % imm */
-+	case BPF_ALU | BPF_RSH | BPF_K:
-+	case BPF_ALU | BPF_ARSH | BPF_K:
-+	case BPF_ALU | BPF_ADD | BPF_K:
-+	case BPF_ALU | BPF_SUB | BPF_K:
-+	case BPF_ALU | BPF_MUL | BPF_K:
-+	case BPF_ALU | BPF_DIV | BPF_K:
-+	case BPF_ALU | BPF_MOD | BPF_K:
-+		if (!valid_alu_i(BPF_OP(code), imm)) {
-+			emit_sext(ctx, dst, dst);
-+			emit_mov_i(ctx, MIPS_R_T4, imm);
-+			emit_alu_r(ctx, dst, MIPS_R_T4, BPF_OP(code));
-+		} else if (rewrite_alu_i(BPF_OP(code), imm, &alu, &val)) {
-+			emit_sext(ctx, dst, dst);
-+			emit_alu_i(ctx, dst, val, alu);
-+		}
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = dst & src */
-+	/* dst = dst | src */
-+	/* dst = dst ^ src */
-+	/* dst = dst << src */
-+	case BPF_ALU | BPF_AND | BPF_X:
-+	case BPF_ALU | BPF_OR | BPF_X:
-+	case BPF_ALU | BPF_XOR | BPF_X:
-+	case BPF_ALU | BPF_LSH | BPF_X:
-+		emit_alu_r(ctx, dst, src, BPF_OP(code));
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = dst >> src */
-+	/* dst = dst >> src (arithmetic) */
-+	/* dst = dst + src */
-+	/* dst = dst - src */
-+	/* dst = dst * src */
-+	/* dst = dst / src */
-+	/* dst = dst % src */
-+	case BPF_ALU | BPF_RSH | BPF_X:
-+	case BPF_ALU | BPF_ARSH | BPF_X:
-+	case BPF_ALU | BPF_ADD | BPF_X:
-+	case BPF_ALU | BPF_SUB | BPF_X:
-+	case BPF_ALU | BPF_MUL | BPF_X:
-+	case BPF_ALU | BPF_DIV | BPF_X:
-+	case BPF_ALU | BPF_MOD | BPF_X:
-+		emit_sext(ctx, dst, dst);
-+		emit_sext(ctx, MIPS_R_T4, src);
-+		emit_alu_r(ctx, dst, MIPS_R_T4, BPF_OP(code));
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = imm (64-bit) */
-+	case BPF_ALU64 | BPF_MOV | BPF_K:
-+		emit_mov_i(ctx, dst, imm);
-+		break;
-+	/* dst = src (64-bit) */
-+	case BPF_ALU64 | BPF_MOV | BPF_X:
-+		emit_mov_r(ctx, dst, src);
-+		break;
-+	/* dst = -dst (64-bit) */
-+	case BPF_ALU64 | BPF_NEG:
-+		emit_alu_i64(ctx, dst, 0, BPF_NEG);
-+		break;
-+	/* dst = dst & imm (64-bit) */
-+	/* dst = dst | imm (64-bit) */
-+	/* dst = dst ^ imm (64-bit) */
-+	/* dst = dst << imm (64-bit) */
-+	/* dst = dst >> imm (64-bit) */
-+	/* dst = dst >> imm ((64-bit, arithmetic) */
-+	/* dst = dst + imm (64-bit) */
-+	/* dst = dst - imm (64-bit) */
-+	/* dst = dst * imm (64-bit) */
-+	/* dst = dst / imm (64-bit) */
-+	/* dst = dst % imm (64-bit) */
-+	case BPF_ALU64 | BPF_AND | BPF_K:
-+	case BPF_ALU64 | BPF_OR | BPF_K:
-+	case BPF_ALU64 | BPF_XOR | BPF_K:
-+	case BPF_ALU64 | BPF_LSH | BPF_K:
-+	case BPF_ALU64 | BPF_RSH | BPF_K:
-+	case BPF_ALU64 | BPF_ARSH | BPF_K:
-+	case BPF_ALU64 | BPF_ADD | BPF_K:
-+	case BPF_ALU64 | BPF_SUB | BPF_K:
-+	case BPF_ALU64 | BPF_MUL | BPF_K:
-+	case BPF_ALU64 | BPF_DIV | BPF_K:
-+	case BPF_ALU64 | BPF_MOD | BPF_K:
-+		if (!valid_alu_i(BPF_OP(code), imm)) {
-+			emit_mov_i(ctx, MIPS_R_T4, imm);
-+			emit_alu_r64(ctx, dst, MIPS_R_T4, BPF_OP(code));
-+		} else if (rewrite_alu_i(BPF_OP(code), imm, &alu, &val)) {
-+			emit_alu_i64(ctx, dst, val, alu);
-+		}
-+		break;
-+	/* dst = dst & src (64-bit) */
-+	/* dst = dst | src (64-bit) */
-+	/* dst = dst ^ src (64-bit) */
-+	/* dst = dst << src (64-bit) */
-+	/* dst = dst >> src (64-bit) */
-+	/* dst = dst >> src (64-bit, arithmetic) */
-+	/* dst = dst + src (64-bit) */
-+	/* dst = dst - src (64-bit) */
-+	/* dst = dst * src (64-bit) */
-+	/* dst = dst / src (64-bit) */
-+	/* dst = dst % src (64-bit) */
-+	case BPF_ALU64 | BPF_AND | BPF_X:
-+	case BPF_ALU64 | BPF_OR | BPF_X:
-+	case BPF_ALU64 | BPF_XOR | BPF_X:
-+	case BPF_ALU64 | BPF_LSH | BPF_X:
-+	case BPF_ALU64 | BPF_RSH | BPF_X:
-+	case BPF_ALU64 | BPF_ARSH | BPF_X:
-+	case BPF_ALU64 | BPF_ADD | BPF_X:
-+	case BPF_ALU64 | BPF_SUB | BPF_X:
-+	case BPF_ALU64 | BPF_MUL | BPF_X:
-+	case BPF_ALU64 | BPF_DIV | BPF_X:
-+	case BPF_ALU64 | BPF_MOD | BPF_X:
-+		emit_alu_r64(ctx, dst, src, BPF_OP(code));
-+		break;
-+	/* dst = htole(dst) */
-+	/* dst = htobe(dst) */
-+	case BPF_ALU | BPF_END | BPF_FROM_LE:
-+	case BPF_ALU | BPF_END | BPF_FROM_BE:
-+		if (BPF_SRC(code) ==
-+#ifdef __BIG_ENDIAN
-+		    BPF_FROM_LE
-+#else
-+		    BPF_FROM_BE
-+#endif
-+		    )
-+			emit_bswap_r64(ctx, dst, imm);
-+		else
-+			emit_trunc_r64(ctx, dst, imm);
-+		break;
-+	/* dst = imm64 */
-+	case BPF_LD | BPF_IMM | BPF_DW:
-+		emit_mov_i64(ctx, dst, (u32)imm | ((u64)insn[1].imm << 32));
-+		return 1;
-+	/* LDX: dst = *(size *)(src + off) */
-+	case BPF_LDX | BPF_MEM | BPF_W:
-+	case BPF_LDX | BPF_MEM | BPF_H:
-+	case BPF_LDX | BPF_MEM | BPF_B:
-+	case BPF_LDX | BPF_MEM | BPF_DW:
-+		emit_ldx(ctx, dst, src, off, BPF_SIZE(code));
-+		break;
-+	/* ST: *(size *)(dst + off) = imm */
-+	case BPF_ST | BPF_MEM | BPF_W:
-+	case BPF_ST | BPF_MEM | BPF_H:
-+	case BPF_ST | BPF_MEM | BPF_B:
-+	case BPF_ST | BPF_MEM | BPF_DW:
-+		emit_mov_i(ctx, MIPS_R_T4, imm);
-+		emit_stx(ctx, dst, MIPS_R_T4, off, BPF_SIZE(code));
-+		break;
-+	/* STX: *(size *)(dst + off) = src */
-+	case BPF_STX | BPF_MEM | BPF_W:
-+	case BPF_STX | BPF_MEM | BPF_H:
-+	case BPF_STX | BPF_MEM | BPF_B:
-+	case BPF_STX | BPF_MEM | BPF_DW:
-+		emit_stx(ctx, dst, src, off, BPF_SIZE(code));
-+		break;
-+	/* Speculation barrier */
-+	case BPF_ST | BPF_NOSPEC:
-+		break;
-+	/* Atomics */
-+	case BPF_STX | BPF_XADD | BPF_W:
-+	case BPF_STX | BPF_XADD | BPF_DW:
-+		switch (imm) {
-+		case BPF_ADD:
-+		case BPF_AND:
-+		case BPF_OR:
-+		case BPF_XOR:
-+			if (BPF_SIZE(code) == BPF_DW) {
-+				emit_atomic_r64(ctx, dst, src, off, imm);
-+			} else { /* 32-bit, no fetch */
-+				emit_sext(ctx, MIPS_R_T4, src);
-+				emit_atomic_r(ctx, dst, MIPS_R_T4, off, imm);
-+			}
-+			break;
-+		default:
-+			goto notyet;
-+		}
-+		break;
-+	/* PC += off if dst == src */
-+	/* PC += off if dst != src */
-+	/* PC += off if dst & src */
-+	/* PC += off if dst > src */
-+	/* PC += off if dst >= src */
-+	/* PC += off if dst < src */
-+	/* PC += off if dst <= src */
-+	/* PC += off if dst > src (signed) */
-+	/* PC += off if dst >= src (signed) */
-+	/* PC += off if dst < src (signed) */
-+	/* PC += off if dst <= src (signed) */
-+	case BPF_JMP32 | BPF_JEQ | BPF_X:
-+	case BPF_JMP32 | BPF_JNE | BPF_X:
-+	case BPF_JMP32 | BPF_JSET | BPF_X:
-+	case BPF_JMP32 | BPF_JGT | BPF_X:
-+	case BPF_JMP32 | BPF_JGE | BPF_X:
-+	case BPF_JMP32 | BPF_JLT | BPF_X:
-+	case BPF_JMP32 | BPF_JLE | BPF_X:
-+	case BPF_JMP32 | BPF_JSGT | BPF_X:
-+	case BPF_JMP32 | BPF_JSGE | BPF_X:
-+	case BPF_JMP32 | BPF_JSLT | BPF_X:
-+	case BPF_JMP32 | BPF_JSLE | BPF_X:
-+		if (off == 0)
-+			break;
-+		setup_jmp_r(ctx, dst == src, BPF_OP(code), off, &jmp, &rel);
-+		emit_sext(ctx, MIPS_R_T4, dst); /* Sign-extended dst */
-+		emit_sext(ctx, MIPS_R_T5, src); /* Sign-extended src */
-+		emit_jmp_r(ctx, MIPS_R_T4, MIPS_R_T5, rel, jmp);
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off if dst == imm */
-+	/* PC += off if dst != imm */
-+	/* PC += off if dst & imm */
-+	/* PC += off if dst > imm */
-+	/* PC += off if dst >= imm */
-+	/* PC += off if dst < imm */
-+	/* PC += off if dst <= imm */
-+	/* PC += off if dst > imm (signed) */
-+	/* PC += off if dst >= imm (signed) */
-+	/* PC += off if dst < imm (signed) */
-+	/* PC += off if dst <= imm (signed) */
-+	case BPF_JMP32 | BPF_JEQ | BPF_K:
-+	case BPF_JMP32 | BPF_JNE | BPF_K:
-+	case BPF_JMP32 | BPF_JSET | BPF_K:
-+	case BPF_JMP32 | BPF_JGT | BPF_K:
-+	case BPF_JMP32 | BPF_JGE | BPF_K:
-+	case BPF_JMP32 | BPF_JLT | BPF_K:
-+	case BPF_JMP32 | BPF_JLE | BPF_K:
-+	case BPF_JMP32 | BPF_JSGT | BPF_K:
-+	case BPF_JMP32 | BPF_JSGE | BPF_K:
-+	case BPF_JMP32 | BPF_JSLT | BPF_K:
-+	case BPF_JMP32 | BPF_JSLE | BPF_K:
-+		if (off == 0)
-+			break;
-+		setup_jmp_i(ctx, imm, 32, BPF_OP(code), off, &jmp, &rel);
-+		emit_sext(ctx, MIPS_R_T4, dst); /* Sign-extended dst */
-+		if (valid_jmp_i(jmp, imm)) {
-+			emit_jmp_i(ctx, MIPS_R_T4, imm, rel, jmp);
-+		} else {
-+			/* Move large immediate to register, sign-extended */
-+			emit_mov_i(ctx, MIPS_R_T5, imm);
-+			emit_jmp_r(ctx, MIPS_R_T4, MIPS_R_T5, rel, jmp);
-+		}
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off if dst == src */
-+	/* PC += off if dst != src */
-+	/* PC += off if dst & src */
-+	/* PC += off if dst > src */
-+	/* PC += off if dst >= src */
-+	/* PC += off if dst < src */
-+	/* PC += off if dst <= src */
-+	/* PC += off if dst > src (signed) */
-+	/* PC += off if dst >= src (signed) */
-+	/* PC += off if dst < src (signed) */
-+	/* PC += off if dst <= src (signed) */
-+	case BPF_JMP | BPF_JEQ | BPF_X:
-+	case BPF_JMP | BPF_JNE | BPF_X:
-+	case BPF_JMP | BPF_JSET | BPF_X:
-+	case BPF_JMP | BPF_JGT | BPF_X:
-+	case BPF_JMP | BPF_JGE | BPF_X:
-+	case BPF_JMP | BPF_JLT | BPF_X:
-+	case BPF_JMP | BPF_JLE | BPF_X:
-+	case BPF_JMP | BPF_JSGT | BPF_X:
-+	case BPF_JMP | BPF_JSGE | BPF_X:
-+	case BPF_JMP | BPF_JSLT | BPF_X:
-+	case BPF_JMP | BPF_JSLE | BPF_X:
-+		if (off == 0)
-+			break;
-+		setup_jmp_r(ctx, dst == src, BPF_OP(code), off, &jmp, &rel);
-+		emit_jmp_r(ctx, dst, src, rel, jmp);
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off if dst == imm */
-+	/* PC += off if dst != imm */
-+	/* PC += off if dst & imm */
-+	/* PC += off if dst > imm */
-+	/* PC += off if dst >= imm */
-+	/* PC += off if dst < imm */
-+	/* PC += off if dst <= imm */
-+	/* PC += off if dst > imm (signed) */
-+	/* PC += off if dst >= imm (signed) */
-+	/* PC += off if dst < imm (signed) */
-+	/* PC += off if dst <= imm (signed) */
-+	case BPF_JMP | BPF_JEQ | BPF_K:
-+	case BPF_JMP | BPF_JNE | BPF_K:
-+	case BPF_JMP | BPF_JSET | BPF_K:
-+	case BPF_JMP | BPF_JGT | BPF_K:
-+	case BPF_JMP | BPF_JGE | BPF_K:
-+	case BPF_JMP | BPF_JLT | BPF_K:
-+	case BPF_JMP | BPF_JLE | BPF_K:
-+	case BPF_JMP | BPF_JSGT | BPF_K:
-+	case BPF_JMP | BPF_JSGE | BPF_K:
-+	case BPF_JMP | BPF_JSLT | BPF_K:
-+	case BPF_JMP | BPF_JSLE | BPF_K:
-+		if (off == 0)
-+			break;
-+		setup_jmp_i(ctx, imm, 64, BPF_OP(code), off, &jmp, &rel);
-+		if (valid_jmp_i(jmp, imm)) {
-+			emit_jmp_i(ctx, dst, imm, rel, jmp);
-+		} else {
-+			/* Move large immediate to register */
-+			emit_mov_i(ctx, MIPS_R_T4, imm);
-+			emit_jmp_r(ctx, dst, MIPS_R_T4, rel, jmp);
-+		}
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off */
-+	case BPF_JMP | BPF_JA:
-+		if (off == 0)
-+			break;
-+		if (emit_ja(ctx, off) < 0)
-+			goto toofar;
-+		break;
-+	/* Tail call */
-+	case BPF_JMP | BPF_TAIL_CALL:
-+		if (emit_tail_call(ctx) < 0)
-+			goto invalid;
-+		break;
-+	/* Function call */
-+	case BPF_JMP | BPF_CALL:
-+		if (emit_call(ctx, insn) < 0)
-+			goto invalid;
-+		break;
-+	/* Function return */
-+	case BPF_JMP | BPF_EXIT:
-+		/*
-+		 * Optimization: when last instruction is EXIT
-+		 * simply continue to epilogue.
-+		 */
-+		if (ctx->bpf_index == ctx->program->len - 1)
-+			break;
-+		if (emit_exit(ctx) < 0)
-+			goto toofar;
-+		break;
-+
-+	default:
-+invalid:
-+		pr_err_once("unknown opcode %02x\n", code);
-+		return -EINVAL;
-+notyet:
-+		pr_info_once("*** NOT YET: opcode %02x ***\n", code);
-+		return -EFAULT;
-+toofar:
-+		pr_info_once("*** TOO FAR: jump at %u opcode %02x ***\n",
-+			     ctx->bpf_index, code);
-+		return -E2BIG;
-+	}
-+	return 0;
-+}
diff --git a/target/linux/generic/backport-5.4/071-v5.16-04-mips-bpf-Add-JIT-workarounds-for-CPU-errata.patch b/target/linux/generic/backport-5.4/071-v5.16-04-mips-bpf-Add-JIT-workarounds-for-CPU-errata.patch
deleted file mode 100644
index 63553ebe58..0000000000
--- a/target/linux/generic/backport-5.4/071-v5.16-04-mips-bpf-Add-JIT-workarounds-for-CPU-errata.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Date: Tue, 5 Oct 2021 18:54:06 +0200
-Subject: [PATCH] mips: bpf: Add JIT workarounds for CPU errata
-
-This patch adds workarounds for the following CPU errata to the MIPS
-eBPF JIT, if enabled in the kernel configuration.
-
-  - R10000 ll/sc weak ordering
-  - Loongson-3 ll/sc weak ordering
-  - Loongson-2F jump hang
-
-The Loongson-2F nop errata is implemented in uasm, which the JIT uses,
-so no additional mitigations are needed for that.
-
-Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
----
-
---- a/arch/mips/net/bpf_jit_comp.c
-+++ b/arch/mips/net/bpf_jit_comp.c
-@@ -404,6 +404,7 @@ void emit_alu_r(struct jit_context *ctx,
- /* Atomic read-modify-write (32-bit) */
- void emit_atomic_r(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 code)
- {
-+	LLSC_sync(ctx);
- 	emit(ctx, ll, MIPS_R_T9, off, dst);
- 	switch (code) {
- 	case BPF_ADD:
-@@ -420,18 +421,19 @@ void emit_atomic_r(struct jit_context *c
- 		break;
- 	}
- 	emit(ctx, sc, MIPS_R_T8, off, dst);
--	emit(ctx, beqz, MIPS_R_T8, -16);
-+	emit(ctx, LLSC_beqz, MIPS_R_T8, -16 - LLSC_offset);
- 	emit(ctx, nop); /* Delay slot */
- }
- 
- /* Atomic compare-and-exchange (32-bit) */
- void emit_cmpxchg_r(struct jit_context *ctx, u8 dst, u8 src, u8 res, s16 off)
- {
-+	LLSC_sync(ctx);
- 	emit(ctx, ll, MIPS_R_T9, off, dst);
- 	emit(ctx, bne, MIPS_R_T9, res, 12);
- 	emit(ctx, move, MIPS_R_T8, src);     /* Delay slot */
- 	emit(ctx, sc, MIPS_R_T8, off, dst);
--	emit(ctx, beqz, MIPS_R_T8, -20);
-+	emit(ctx, LLSC_beqz, MIPS_R_T8, -20 - LLSC_offset);
- 	emit(ctx, move, res, MIPS_R_T9);     /* Delay slot */
- 	clobber_reg(ctx, res);
- }
---- a/arch/mips/net/bpf_jit_comp.h
-+++ b/arch/mips/net/bpf_jit_comp.h
-@@ -87,7 +87,7 @@ struct jit_context {
- };
- 
- /* Emit the instruction if the JIT memory space has been allocated */
--#define emit(ctx, func, ...)					\
-+#define __emit(ctx, func, ...)					\
- do {								\
- 	if ((ctx)->target != NULL) {				\
- 		u32 *p = &(ctx)->target[ctx->jit_index];	\
-@@ -95,6 +95,30 @@ do {								\
- 	}							\
- 	(ctx)->jit_index++;					\
- } while (0)
-+#define emit(...) __emit(__VA_ARGS__)
-+
-+/* Workaround for R10000 ll/sc errata */
-+#ifdef CONFIG_WAR_R10000
-+#define LLSC_beqz	beqzl
-+#else
-+#define LLSC_beqz	beqz
-+#endif
-+
-+/* Workaround for Loongson-3 ll/sc errata */
-+#ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS
-+#define LLSC_sync(ctx)	emit(ctx, sync, 0)
-+#define LLSC_offset	4
-+#else
-+#define LLSC_sync(ctx)
-+#define LLSC_offset	0
-+#endif
-+
-+/* Workaround for Loongson-2F jump errata */
-+#ifdef CONFIG_CPU_JUMP_WORKAROUNDS
-+#define JALR_MASK	0xffffffffcfffffffULL
-+#else
-+#define JALR_MASK	(~0ULL)
-+#endif
- 
- /*
-  * Mark a BPF register as accessed, it needs to be
---- a/arch/mips/net/bpf_jit_comp64.c
-+++ b/arch/mips/net/bpf_jit_comp64.c
-@@ -375,6 +375,7 @@ static void emit_atomic_r64(struct jit_c
- 	u8 t1 = MIPS_R_T6;
- 	u8 t2 = MIPS_R_T7;
- 
-+	LLSC_sync(ctx);
- 	emit(ctx, lld, t1, off, dst);
- 	switch (code) {
- 	case BPF_ADD:
-@@ -391,7 +392,7 @@ static void emit_atomic_r64(struct jit_c
- 		break;
- 	}
- 	emit(ctx, scd, t2, off, dst);
--	emit(ctx, beqz, t2, -16);
-+	emit(ctx, LLSC_beqz, t2, -16 - LLSC_offset);
- 	emit(ctx, nop); /* Delay slot */
- }
- 
-@@ -414,7 +415,7 @@ static int emit_call(struct jit_context
- 	push_regs(ctx, ctx->clobbered & JIT_CALLER_REGS, 0, 0);
- 
- 	/* Emit function call */
--	emit_mov_i64(ctx, tmp, addr);
-+	emit_mov_i64(ctx, tmp, addr & JALR_MASK);
- 	emit(ctx, jalr, MIPS_R_RA, tmp);
- 	emit(ctx, nop); /* Delay slot */
- 
diff --git a/target/linux/generic/backport-5.4/071-v5.16-05-mips-bpf-Enable-eBPF-JITs.patch b/target/linux/generic/backport-5.4/071-v5.16-05-mips-bpf-Enable-eBPF-JITs.patch
deleted file mode 100644
index c8ce0becf9..0000000000
--- a/target/linux/generic/backport-5.4/071-v5.16-05-mips-bpf-Enable-eBPF-JITs.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Date: Tue, 5 Oct 2021 18:54:07 +0200
-Subject: [PATCH] mips: bpf: Enable eBPF JITs
-
-This patch enables the new eBPF JITs for 32-bit and 64-bit MIPS. It also
-disables the old cBPF JIT to so cBPF programs are converted to use the
-new JIT.
-
-Workarounds for R4000 CPU errata are not implemented by the JIT, so the
-JIT is disabled if any of those workarounds are configured.
-
-Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
----
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3099,6 +3099,7 @@ S:	Supported
- F:	arch/arm64/net/
- 
- BPF JIT for MIPS (32-BIT AND 64-BIT)
-+M:	Johan Almbladh <johan.almbladh@anyfinetworks.com>
- M:	Paul Burton <paulburton@kernel.org>
- L:	netdev@vger.kernel.org
- L:	bpf@vger.kernel.org
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -46,8 +46,10 @@ config MIPS
- 	select HAVE_ARCH_TRACEHOOK
- 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES
- 	select HAVE_ASM_MODVERSIONS
--	select HAVE_CBPF_JIT if !64BIT && !CPU_MICROMIPS
--	select HAVE_EBPF_JIT if 64BIT && !CPU_MICROMIPS && TARGET_ISA_REV >= 2
-+	select HAVE_EBPF_JIT if !CPU_MICROMIPS && \
-+				!CPU_DADDI_WORKAROUNDS && \
-+				!CPU_R4000_WORKAROUNDS && \
-+				!CPU_R4400_WORKAROUNDS
- 	select HAVE_CONTEXT_TRACKING
- 	select HAVE_COPY_THREAD_TLS
- 	select HAVE_C_RECORDMCOUNT
---- a/arch/mips/net/Makefile
-+++ b/arch/mips/net/Makefile
-@@ -2,9 +2,10 @@
- # MIPS networking code
- 
- obj-$(CONFIG_MIPS_CBPF_JIT) += bpf_jit.o bpf_jit_asm.o
-+obj-$(CONFIG_MIPS_EBPF_JIT) += bpf_jit_comp.o
- 
- ifeq ($(CONFIG_32BIT),y)
--        obj-$(CONFIG_MIPS_EBPF_JIT) += bpf_jit_comp.o bpf_jit_comp32.o
-+        obj-$(CONFIG_MIPS_EBPF_JIT) += bpf_jit_comp32.o
- else
--        obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o
-+        obj-$(CONFIG_MIPS_EBPF_JIT) += bpf_jit_comp64.o
- endif
diff --git a/target/linux/generic/backport-5.4/071-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch b/target/linux/generic/backport-5.4/071-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch
deleted file mode 100644
index e25c336831..0000000000
--- a/target/linux/generic/backport-5.4/071-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch
+++ /dev/null
@@ -1,387 +0,0 @@
-From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Date: Tue, 5 Oct 2021 18:54:08 +0200
-Subject: [PATCH] mips: bpf: Remove old BPF JIT implementations
-
-This patch removes the old 32-bit cBPF and 64-bit eBPF JIT implementations.
-They are replaced by a new eBPF implementation that supports both 32-bit
-and 64-bit MIPS CPUs.
-
-Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
----
- delete mode 100644 arch/mips/net/bpf_jit.c
- delete mode 100644 arch/mips/net/bpf_jit.h
- delete mode 100644 arch/mips/net/bpf_jit_asm.S
- delete mode 100644 arch/mips/net/ebpf_jit.c
-
---- a/arch/mips/net/bpf_jit.h
-+++ /dev/null
-@@ -1,81 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0-only */
--/*
-- * Just-In-Time compiler for BPF filters on MIPS
-- *
-- * Copyright (c) 2014 Imagination Technologies Ltd.
-- * Author: Markos Chandras <markos.chandras@imgtec.com>
-- */
--
--#ifndef BPF_JIT_MIPS_OP_H
--#define BPF_JIT_MIPS_OP_H
--
--/* Registers used by JIT */
--#define MIPS_R_ZERO	0
--#define MIPS_R_V0	2
--#define MIPS_R_A0	4
--#define MIPS_R_A1	5
--#define MIPS_R_T4	12
--#define MIPS_R_T5	13
--#define MIPS_R_T6	14
--#define MIPS_R_T7	15
--#define MIPS_R_S0	16
--#define MIPS_R_S1	17
--#define MIPS_R_S2	18
--#define MIPS_R_S3	19
--#define MIPS_R_S4	20
--#define MIPS_R_S5	21
--#define MIPS_R_S6	22
--#define MIPS_R_S7	23
--#define MIPS_R_SP	29
--#define MIPS_R_RA	31
--
--/* Conditional codes */
--#define MIPS_COND_EQ	0x1
--#define MIPS_COND_GE	(0x1 << 1)
--#define MIPS_COND_GT	(0x1 << 2)
--#define MIPS_COND_NE	(0x1 << 3)
--#define MIPS_COND_ALL	(0x1 << 4)
--/* Conditionals on X register or K immediate */
--#define MIPS_COND_X	(0x1 << 5)
--#define MIPS_COND_K	(0x1 << 6)
--
--#define r_ret	MIPS_R_V0
--
--/*
-- * Use 2 scratch registers to avoid pipeline interlocks.
-- * There is no overhead during epilogue and prologue since
-- * any of the $s0-$s6 registers will only be preserved if
-- * they are going to actually be used.
-- */
--#define r_skb_hl	MIPS_R_S0 /* skb header length */
--#define r_skb_data	MIPS_R_S1 /* skb actual data */
--#define r_off		MIPS_R_S2
--#define r_A		MIPS_R_S3
--#define r_X		MIPS_R_S4
--#define r_skb		MIPS_R_S5
--#define r_M		MIPS_R_S6
--#define r_skb_len	MIPS_R_S7
--#define r_s0		MIPS_R_T4 /* scratch reg 1 */
--#define r_s1		MIPS_R_T5 /* scratch reg 2 */
--#define r_tmp_imm	MIPS_R_T6 /* No need to preserve this */
--#define r_tmp		MIPS_R_T7 /* No need to preserve this */
--#define r_zero		MIPS_R_ZERO
--#define r_sp		MIPS_R_SP
--#define r_ra		MIPS_R_RA
--
--#ifndef __ASSEMBLY__
--
--/* Declare ASM helpers */
--
--#define DECLARE_LOAD_FUNC(func) \
--	extern u8 func(unsigned long *skb, int offset); \
--	extern u8 func##_negative(unsigned long *skb, int offset); \
--	extern u8 func##_positive(unsigned long *skb, int offset)
--
--DECLARE_LOAD_FUNC(sk_load_word);
--DECLARE_LOAD_FUNC(sk_load_half);
--DECLARE_LOAD_FUNC(sk_load_byte);
--
--#endif
--
--#endif /* BPF_JIT_MIPS_OP_H */
---- a/arch/mips/net/bpf_jit_asm.S
-+++ /dev/null
-@@ -1,285 +0,0 @@
--/*
-- * bpf_jib_asm.S: Packet/header access helper functions for MIPS/MIPS64 BPF
-- * compiler.
-- *
-- * Copyright (C) 2015 Imagination Technologies Ltd.
-- * Author: Markos Chandras <markos.chandras@imgtec.com>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License as published by the
-- * Free Software Foundation; version 2 of the License.
-- */
--
--#include <asm/asm.h>
--#include <asm/isa-rev.h>
--#include <asm/regdef.h>
--#include "bpf_jit.h"
--
--/* ABI
-- *
-- * r_skb_hl	skb header length
-- * r_skb_data	skb data
-- * r_off(a1)	offset register
-- * r_A		BPF register A
-- * r_X		PF register X
-- * r_skb(a0)	*skb
-- * r_M		*scratch memory
-- * r_skb_le	skb length
-- * r_s0		Scratch register 0
-- * r_s1		Scratch register 1
-- *
-- * On entry:
-- * a0: *skb
-- * a1: offset (imm or imm + X)
-- *
-- * All non-BPF-ABI registers are free for use. On return, we only
-- * care about r_ret. The BPF-ABI registers are assumed to remain
-- * unmodified during the entire filter operation.
-- */
--
--#define skb	a0
--#define offset	a1
--#define SKF_LL_OFF  (-0x200000) /* Can't include linux/filter.h in assembly */
--
--	/* We know better :) so prevent assembler reordering etc */
--	.set 	noreorder
--
--#define is_offset_negative(TYPE)				\
--	/* If offset is negative we have more work to do */	\
--	slti	t0, offset, 0;					\
--	bgtz	t0, bpf_slow_path_##TYPE##_neg;			\
--	/* Be careful what follows in DS. */
--
--#define is_offset_in_header(SIZE, TYPE)				\
--	/* Reading from header? */				\
--	addiu	$r_s0, $r_skb_hl, -SIZE;			\
--	slt	t0, $r_s0, offset;				\
--	bgtz	t0, bpf_slow_path_##TYPE;			\
--
--LEAF(sk_load_word)
--	is_offset_negative(word)
--FEXPORT(sk_load_word_positive)
--	is_offset_in_header(4, word)
--	/* Offset within header boundaries */
--	PTR_ADDU t1, $r_skb_data, offset
--	.set	reorder
--	lw	$r_A, 0(t1)
--	.set	noreorder
--#ifdef CONFIG_CPU_LITTLE_ENDIAN
--# if MIPS_ISA_REV >= 2
--	wsbh	t0, $r_A
--	rotr	$r_A, t0, 16
--# else
--	sll	t0, $r_A, 24
--	srl	t1, $r_A, 24
--	srl	t2, $r_A, 8
--	or	t0, t0, t1
--	andi	t2, t2, 0xff00
--	andi	t1, $r_A, 0xff00
--	or	t0, t0, t2
--	sll	t1, t1, 8
--	or	$r_A, t0, t1
--# endif
--#endif
--	jr	$r_ra
--	 move	$r_ret, zero
--	END(sk_load_word)
--
--LEAF(sk_load_half)
--	is_offset_negative(half)
--FEXPORT(sk_load_half_positive)
--	is_offset_in_header(2, half)
--	/* Offset within header boundaries */
--	PTR_ADDU t1, $r_skb_data, offset
--	lhu	$r_A, 0(t1)
--#ifdef CONFIG_CPU_LITTLE_ENDIAN
--# if MIPS_ISA_REV >= 2
--	wsbh	$r_A, $r_A
--# else
--	sll	t0, $r_A, 8
--	srl	t1, $r_A, 8
--	andi	t0, t0, 0xff00
--	or	$r_A, t0, t1
--# endif
--#endif
--	jr	$r_ra
--	 move	$r_ret, zero
--	END(sk_load_half)
--
--LEAF(sk_load_byte)
--	is_offset_negative(byte)
--FEXPORT(sk_load_byte_positive)
--	is_offset_in_header(1, byte)
--	/* Offset within header boundaries */
--	PTR_ADDU t1, $r_skb_data, offset
--	lbu	$r_A, 0(t1)
--	jr	$r_ra
--	 move	$r_ret, zero
--	END(sk_load_byte)
--
--/*
-- * call skb_copy_bits:
-- * (prototype in linux/skbuff.h)
-- *
-- * int skb_copy_bits(sk_buff *skb, int offset, void *to, int len)
-- *
-- * o32 mandates we leave 4 spaces for argument registers in case
-- * the callee needs to use them. Even though we don't care about
-- * the argument registers ourselves, we need to allocate that space
-- * to remain ABI compliant since the callee may want to use that space.
-- * We also allocate 2 more spaces for $r_ra and our return register (*to).
-- *
-- * n64 is a bit different. The *caller* will allocate the space to preserve
-- * the arguments. So in 64-bit kernels, we allocate the 4-arg space for no
-- * good reason but it does not matter that much really.
-- *
-- * (void *to) is returned in r_s0
-- *
-- */
--#ifdef CONFIG_CPU_LITTLE_ENDIAN
--#define DS_OFFSET(SIZE) (4 * SZREG)
--#else
--#define DS_OFFSET(SIZE) ((4 * SZREG) + (4 - SIZE))
--#endif
--#define bpf_slow_path_common(SIZE)				\
--	/* Quick check. Are we within reasonable boundaries? */ \
--	LONG_ADDIU	$r_s1, $r_skb_len, -SIZE;		\
--	sltu		$r_s0, offset, $r_s1;			\
--	beqz		$r_s0, fault;				\
--	/* Load 4th argument in DS */				\
--	 LONG_ADDIU	a3, zero, SIZE;				\
--	PTR_ADDIU	$r_sp, $r_sp, -(6 * SZREG);		\
--	PTR_LA		t0, skb_copy_bits;			\
--	PTR_S		$r_ra, (5 * SZREG)($r_sp);		\
--	/* Assign low slot to a2 */				\
--	PTR_ADDIU	a2, $r_sp, DS_OFFSET(SIZE);		\
--	jalr		t0;					\
--	/* Reset our destination slot (DS but it's ok) */	\
--	 INT_S		zero, (4 * SZREG)($r_sp);		\
--	/*							\
--	 * skb_copy_bits returns 0 on success and -EFAULT	\
--	 * on error. Our data live in a2. Do not bother with	\
--	 * our data if an error has been returned.		\
--	 */							\
--	/* Restore our frame */					\
--	PTR_L		$r_ra, (5 * SZREG)($r_sp);		\
--	INT_L		$r_s0, (4 * SZREG)($r_sp);		\
--	bltz		v0, fault;				\
--	 PTR_ADDIU	$r_sp, $r_sp, 6 * SZREG;		\
--	move		$r_ret, zero;				\
--
--NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
--	bpf_slow_path_common(4)
--#ifdef CONFIG_CPU_LITTLE_ENDIAN
--# if MIPS_ISA_REV >= 2
--	wsbh	t0, $r_s0
--	jr	$r_ra
--	 rotr	$r_A, t0, 16
--# else
--	sll	t0, $r_s0, 24
--	srl	t1, $r_s0, 24
--	srl	t2, $r_s0, 8
--	or	t0, t0, t1
--	andi	t2, t2, 0xff00
--	andi	t1, $r_s0, 0xff00
--	or	t0, t0, t2
--	sll	t1, t1, 8
--	jr	$r_ra
--	 or	$r_A, t0, t1
--# endif
--#else
--	jr	$r_ra
--	 move	$r_A, $r_s0
--#endif
--
--	END(bpf_slow_path_word)
--
--NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp)
--	bpf_slow_path_common(2)
--#ifdef CONFIG_CPU_LITTLE_ENDIAN
--# if MIPS_ISA_REV >= 2
--	jr	$r_ra
--	 wsbh	$r_A, $r_s0
--# else
--	sll	t0, $r_s0, 8
--	andi	t1, $r_s0, 0xff00
--	andi	t0, t0, 0xff00
--	srl	t1, t1, 8
--	jr	$r_ra
--	 or	$r_A, t0, t1
--# endif
--#else
--	jr	$r_ra
--	 move	$r_A, $r_s0
--#endif
--
--	END(bpf_slow_path_half)
--
--NESTED(bpf_slow_path_byte, (6 * SZREG), $r_sp)
--	bpf_slow_path_common(1)
--	jr	$r_ra
--	 move	$r_A, $r_s0
--
--	END(bpf_slow_path_byte)
--
--/*
-- * Negative entry points
-- */
--	.macro bpf_is_end_of_data
--	li	t0, SKF_LL_OFF
--	/* Reading link layer data? */
--	slt	t1, offset, t0
--	bgtz	t1, fault
--	/* Be careful what follows in DS. */
--	.endm
--/*
-- * call skb_copy_bits:
-- * (prototype in linux/filter.h)
-- *
-- * void *bpf_internal_load_pointer_neg_helper(const struct sk_buff *skb,
-- *                                            int k, unsigned int size)
-- *
-- * see above (bpf_slow_path_common) for ABI restrictions
-- */
--#define bpf_negative_common(SIZE)					\
--	PTR_ADDIU	$r_sp, $r_sp, -(6 * SZREG);			\
--	PTR_LA		t0, bpf_internal_load_pointer_neg_helper;	\
--	PTR_S		$r_ra, (5 * SZREG)($r_sp);			\
--	jalr		t0;						\
--	 li		a2, SIZE;					\
--	PTR_L		$r_ra, (5 * SZREG)($r_sp);			\
--	/* Check return pointer */					\
--	beqz		v0, fault;					\
--	 PTR_ADDIU	$r_sp, $r_sp, 6 * SZREG;			\
--	/* Preserve our pointer */					\
--	move		$r_s0, v0;					\
--	/* Set return value */						\
--	move		$r_ret, zero;					\
--
--bpf_slow_path_word_neg:
--	bpf_is_end_of_data
--NESTED(sk_load_word_negative, (6 * SZREG), $r_sp)
--	bpf_negative_common(4)
--	jr	$r_ra
--	 lw	$r_A, 0($r_s0)
--	END(sk_load_word_negative)
--
--bpf_slow_path_half_neg:
--	bpf_is_end_of_data
--NESTED(sk_load_half_negative, (6 * SZREG), $r_sp)
--	bpf_negative_common(2)
--	jr	$r_ra
--	 lhu	$r_A, 0($r_s0)
--	END(sk_load_half_negative)
--
--bpf_slow_path_byte_neg:
--	bpf_is_end_of_data
--NESTED(sk_load_byte_negative, (6 * SZREG), $r_sp)
--	bpf_negative_common(1)
--	jr	$r_ra
--	 lbu	$r_A, 0($r_s0)
--	END(sk_load_byte_negative)
--
--fault:
--	jr	$r_ra
--	 addiu $r_ret, zero, 1
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0001-crypto-lib-tidy-up-lib-crypto-Kconfig-and-Makefile.patch b/target/linux/generic/backport-5.4/080-wireguard-0001-crypto-lib-tidy-up-lib-crypto-Kconfig-and-Makefile.patch
deleted file mode 100644
index e32e18a357..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0001-crypto-lib-tidy-up-lib-crypto-Kconfig-and-Makefile.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:07 +0100
-Subject: [PATCH] crypto: lib - tidy up lib/crypto Kconfig and Makefile
-
-commit 746b2e024c67aa605ac12d135cd7085a49cf9dc4 upstream.
-
-In preparation of introducing a set of crypto library interfaces, tidy
-up the Makefile and split off the Kconfig symbols into a separate file.
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- crypto/Kconfig      | 13 +------------
- lib/crypto/Kconfig  | 15 +++++++++++++++
- lib/crypto/Makefile | 16 ++++++++--------
- 3 files changed, 24 insertions(+), 20 deletions(-)
- create mode 100644 lib/crypto/Kconfig
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -878,9 +878,6 @@ config CRYPTO_SHA1_PPC_SPE
- 	  SHA-1 secure hash standard (DFIPS 180-4) implemented
- 	  using powerpc SPE SIMD instruction set.
- 
--config CRYPTO_LIB_SHA256
--	tristate
--
- config CRYPTO_SHA256
- 	tristate "SHA224 and SHA256 digest algorithm"
- 	select CRYPTO_HASH
-@@ -1019,9 +1016,6 @@ config CRYPTO_GHASH_CLMUL_NI_INTEL
- 
- comment "Ciphers"
- 
--config CRYPTO_LIB_AES
--	tristate
--
- config CRYPTO_AES
- 	tristate "AES cipher algorithms"
- 	select CRYPTO_ALGAPI
-@@ -1150,9 +1144,6 @@ config CRYPTO_ANUBIS
- 	  <https://www.cosic.esat.kuleuven.be/nessie/reports/>
- 	  <http://www.larc.usp.br/~pbarreto/AnubisPage.html>
- 
--config CRYPTO_LIB_ARC4
--	tristate
--
- config CRYPTO_ARC4
- 	tristate "ARC4 cipher algorithm"
- 	select CRYPTO_BLKCIPHER
-@@ -1339,9 +1330,6 @@ config CRYPTO_CAST6_AVX_X86_64
- 	  This module provides the Cast6 cipher algorithm that processes
- 	  eight blocks parallel using the AVX instruction set.
- 
--config CRYPTO_LIB_DES
--	tristate
--
- config CRYPTO_DES
- 	tristate "DES and Triple DES EDE cipher algorithms"
- 	select CRYPTO_ALGAPI
-@@ -1845,6 +1833,7 @@ config CRYPTO_STATS
- config CRYPTO_HASH_INFO
- 	bool
- 
-+source "lib/crypto/Kconfig"
- source "drivers/crypto/Kconfig"
- source "crypto/asymmetric_keys/Kconfig"
- source "certs/Kconfig"
---- /dev/null
-+++ b/lib/crypto/Kconfig
-@@ -0,0 +1,15 @@
-+# SPDX-License-Identifier: GPL-2.0
-+
-+comment "Crypto library routines"
-+
-+config CRYPTO_LIB_AES
-+	tristate
-+
-+config CRYPTO_LIB_ARC4
-+	tristate
-+
-+config CRYPTO_LIB_DES
-+	tristate
-+
-+config CRYPTO_LIB_SHA256
-+	tristate
---- a/lib/crypto/Makefile
-+++ b/lib/crypto/Makefile
-@@ -1,13 +1,13 @@
- # SPDX-License-Identifier: GPL-2.0
- 
--obj-$(CONFIG_CRYPTO_LIB_AES) += libaes.o
--libaes-y := aes.o
-+obj-$(CONFIG_CRYPTO_LIB_AES)			+= libaes.o
-+libaes-y					:= aes.o
- 
--obj-$(CONFIG_CRYPTO_LIB_ARC4) += libarc4.o
--libarc4-y := arc4.o
-+obj-$(CONFIG_CRYPTO_LIB_ARC4)			+= libarc4.o
-+libarc4-y					:= arc4.o
- 
--obj-$(CONFIG_CRYPTO_LIB_DES) += libdes.o
--libdes-y := des.o
-+obj-$(CONFIG_CRYPTO_LIB_DES)			+= libdes.o
-+libdes-y					:= des.o
- 
--obj-$(CONFIG_CRYPTO_LIB_SHA256) += libsha256.o
--libsha256-y := sha256.o
-+obj-$(CONFIG_CRYPTO_LIB_SHA256)			+= libsha256.o
-+libsha256-y					:= sha256.o
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0002-crypto-chacha-move-existing-library-code-into-lib-cr.patch b/target/linux/generic/backport-5.4/080-wireguard-0002-crypto-chacha-move-existing-library-code-into-lib-cr.patch
deleted file mode 100644
index 177b5840d5..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0002-crypto-chacha-move-existing-library-code-into-lib-cr.patch
+++ /dev/null
@@ -1,668 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:08 +0100
-Subject: [PATCH] crypto: chacha - move existing library code into lib/crypto
-
-commit 5fb8ef25803ef33e2eb60b626435828b937bed75 upstream.
-
-Currently, our generic ChaCha implementation consists of a permute
-function in lib/chacha.c that operates on the 64-byte ChaCha state
-directly [and which is always included into the core kernel since it
-is used by the /dev/random driver], and the crypto API plumbing to
-expose it as a skcipher.
-
-In order to support in-kernel users that need the ChaCha streamcipher
-but have no need [or tolerance] for going through the abstractions of
-the crypto API, let's expose the streamcipher bits via a library API
-as well, in a way that permits the implementation to be superseded by
-an architecture specific one if provided.
-
-So move the streamcipher code into a separate module in lib/crypto,
-and expose the init() and crypt() routines to users of the library.
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/chacha-neon-glue.c   |  2 +-
- arch/arm64/crypto/chacha-neon-glue.c |  2 +-
- arch/x86/crypto/chacha_glue.c        |  2 +-
- crypto/Kconfig                       |  1 +
- crypto/chacha_generic.c              | 60 ++--------------------
- include/crypto/chacha.h              | 77 ++++++++++++++++++++++------
- include/crypto/internal/chacha.h     | 53 +++++++++++++++++++
- lib/Makefile                         |  3 +-
- lib/crypto/Kconfig                   | 26 ++++++++++
- lib/crypto/Makefile                  |  4 ++
- lib/{ => crypto}/chacha.c            | 20 ++++----
- lib/crypto/libchacha.c               | 35 +++++++++++++
- 12 files changed, 199 insertions(+), 86 deletions(-)
- create mode 100644 include/crypto/internal/chacha.h
- rename lib/{ => crypto}/chacha.c (88%)
- create mode 100644 lib/crypto/libchacha.c
-
---- a/arch/arm/crypto/chacha-neon-glue.c
-+++ b/arch/arm/crypto/chacha-neon-glue.c
-@@ -20,7 +20,7 @@
-  */
- 
- #include <crypto/algapi.h>
--#include <crypto/chacha.h>
-+#include <crypto/internal/chacha.h>
- #include <crypto/internal/simd.h>
- #include <crypto/internal/skcipher.h>
- #include <linux/kernel.h>
---- a/arch/arm64/crypto/chacha-neon-glue.c
-+++ b/arch/arm64/crypto/chacha-neon-glue.c
-@@ -20,7 +20,7 @@
-  */
- 
- #include <crypto/algapi.h>
--#include <crypto/chacha.h>
-+#include <crypto/internal/chacha.h>
- #include <crypto/internal/simd.h>
- #include <crypto/internal/skcipher.h>
- #include <linux/kernel.h>
---- a/arch/x86/crypto/chacha_glue.c
-+++ b/arch/x86/crypto/chacha_glue.c
-@@ -7,7 +7,7 @@
-  */
- 
- #include <crypto/algapi.h>
--#include <crypto/chacha.h>
-+#include <crypto/internal/chacha.h>
- #include <crypto/internal/simd.h>
- #include <crypto/internal/skcipher.h>
- #include <linux/kernel.h>
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -1393,6 +1393,7 @@ config CRYPTO_SALSA20
- 
- config CRYPTO_CHACHA20
- 	tristate "ChaCha stream cipher algorithms"
-+	select CRYPTO_LIB_CHACHA_GENERIC
- 	select CRYPTO_BLKCIPHER
- 	help
- 	  The ChaCha20, XChaCha20, and XChaCha12 stream cipher algorithms.
---- a/crypto/chacha_generic.c
-+++ b/crypto/chacha_generic.c
-@@ -8,29 +8,10 @@
- 
- #include <asm/unaligned.h>
- #include <crypto/algapi.h>
--#include <crypto/chacha.h>
-+#include <crypto/internal/chacha.h>
- #include <crypto/internal/skcipher.h>
- #include <linux/module.h>
- 
--static void chacha_docrypt(u32 *state, u8 *dst, const u8 *src,
--			   unsigned int bytes, int nrounds)
--{
--	/* aligned to potentially speed up crypto_xor() */
--	u8 stream[CHACHA_BLOCK_SIZE] __aligned(sizeof(long));
--
--	while (bytes >= CHACHA_BLOCK_SIZE) {
--		chacha_block(state, stream, nrounds);
--		crypto_xor_cpy(dst, src, stream, CHACHA_BLOCK_SIZE);
--		bytes -= CHACHA_BLOCK_SIZE;
--		dst += CHACHA_BLOCK_SIZE;
--		src += CHACHA_BLOCK_SIZE;
--	}
--	if (bytes) {
--		chacha_block(state, stream, nrounds);
--		crypto_xor_cpy(dst, src, stream, bytes);
--	}
--}
--
- static int chacha_stream_xor(struct skcipher_request *req,
- 			     const struct chacha_ctx *ctx, const u8 *iv)
- {
-@@ -48,8 +29,8 @@ static int chacha_stream_xor(struct skci
- 		if (nbytes < walk.total)
- 			nbytes = round_down(nbytes, CHACHA_BLOCK_SIZE);
- 
--		chacha_docrypt(state, walk.dst.virt.addr, walk.src.virt.addr,
--			       nbytes, ctx->nrounds);
-+		chacha_crypt_generic(state, walk.dst.virt.addr,
-+				     walk.src.virt.addr, nbytes, ctx->nrounds);
- 		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
- 	}
- 
-@@ -58,41 +39,10 @@ static int chacha_stream_xor(struct skci
- 
- void crypto_chacha_init(u32 *state, const struct chacha_ctx *ctx, const u8 *iv)
- {
--	state[0]  = 0x61707865; /* "expa" */
--	state[1]  = 0x3320646e; /* "nd 3" */
--	state[2]  = 0x79622d32; /* "2-by" */
--	state[3]  = 0x6b206574; /* "te k" */
--	state[4]  = ctx->key[0];
--	state[5]  = ctx->key[1];
--	state[6]  = ctx->key[2];
--	state[7]  = ctx->key[3];
--	state[8]  = ctx->key[4];
--	state[9]  = ctx->key[5];
--	state[10] = ctx->key[6];
--	state[11] = ctx->key[7];
--	state[12] = get_unaligned_le32(iv +  0);
--	state[13] = get_unaligned_le32(iv +  4);
--	state[14] = get_unaligned_le32(iv +  8);
--	state[15] = get_unaligned_le32(iv + 12);
-+	chacha_init_generic(state, ctx->key, iv);
- }
- EXPORT_SYMBOL_GPL(crypto_chacha_init);
- 
--static int chacha_setkey(struct crypto_skcipher *tfm, const u8 *key,
--			 unsigned int keysize, int nrounds)
--{
--	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
--	int i;
--
--	if (keysize != CHACHA_KEY_SIZE)
--		return -EINVAL;
--
--	for (i = 0; i < ARRAY_SIZE(ctx->key); i++)
--		ctx->key[i] = get_unaligned_le32(key + i * sizeof(u32));
--
--	ctx->nrounds = nrounds;
--	return 0;
--}
--
- int crypto_chacha20_setkey(struct crypto_skcipher *tfm, const u8 *key,
- 			   unsigned int keysize)
- {
-@@ -126,7 +76,7 @@ int crypto_xchacha_crypt(struct skcipher
- 
- 	/* Compute the subkey given the original key and first 128 nonce bits */
- 	crypto_chacha_init(state, ctx, req->iv);
--	hchacha_block(state, subctx.key, ctx->nrounds);
-+	hchacha_block_generic(state, subctx.key, ctx->nrounds);
- 	subctx.nrounds = ctx->nrounds;
- 
- 	/* Build the real IV */
---- a/include/crypto/chacha.h
-+++ b/include/crypto/chacha.h
-@@ -15,9 +15,8 @@
- #ifndef _CRYPTO_CHACHA_H
- #define _CRYPTO_CHACHA_H
- 
--#include <crypto/skcipher.h>
-+#include <asm/unaligned.h>
- #include <linux/types.h>
--#include <linux/crypto.h>
- 
- /* 32-bit stream position, then 96-bit nonce (RFC7539 convention) */
- #define CHACHA_IV_SIZE		16
-@@ -29,26 +28,70 @@
- /* 192-bit nonce, then 64-bit stream position */
- #define XCHACHA_IV_SIZE		32
- 
--struct chacha_ctx {
--	u32 key[8];
--	int nrounds;
--};
--
--void chacha_block(u32 *state, u8 *stream, int nrounds);
-+void chacha_block_generic(u32 *state, u8 *stream, int nrounds);
- static inline void chacha20_block(u32 *state, u8 *stream)
- {
--	chacha_block(state, stream, 20);
-+	chacha_block_generic(state, stream, 20);
- }
--void hchacha_block(const u32 *in, u32 *out, int nrounds);
- 
--void crypto_chacha_init(u32 *state, const struct chacha_ctx *ctx, const u8 *iv);
-+void hchacha_block_arch(const u32 *state, u32 *out, int nrounds);
-+void hchacha_block_generic(const u32 *state, u32 *out, int nrounds);
-+
-+static inline void hchacha_block(const u32 *state, u32 *out, int nrounds)
-+{
-+	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA))
-+		hchacha_block_arch(state, out, nrounds);
-+	else
-+		hchacha_block_generic(state, out, nrounds);
-+}
- 
--int crypto_chacha20_setkey(struct crypto_skcipher *tfm, const u8 *key,
--			   unsigned int keysize);
--int crypto_chacha12_setkey(struct crypto_skcipher *tfm, const u8 *key,
--			   unsigned int keysize);
-+void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv);
-+static inline void chacha_init_generic(u32 *state, const u32 *key, const u8 *iv)
-+{
-+	state[0]  = 0x61707865; /* "expa" */
-+	state[1]  = 0x3320646e; /* "nd 3" */
-+	state[2]  = 0x79622d32; /* "2-by" */
-+	state[3]  = 0x6b206574; /* "te k" */
-+	state[4]  = key[0];
-+	state[5]  = key[1];
-+	state[6]  = key[2];
-+	state[7]  = key[3];
-+	state[8]  = key[4];
-+	state[9]  = key[5];
-+	state[10] = key[6];
-+	state[11] = key[7];
-+	state[12] = get_unaligned_le32(iv +  0);
-+	state[13] = get_unaligned_le32(iv +  4);
-+	state[14] = get_unaligned_le32(iv +  8);
-+	state[15] = get_unaligned_le32(iv + 12);
-+}
- 
--int crypto_chacha_crypt(struct skcipher_request *req);
--int crypto_xchacha_crypt(struct skcipher_request *req);
-+static inline void chacha_init(u32 *state, const u32 *key, const u8 *iv)
-+{
-+	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA))
-+		chacha_init_arch(state, key, iv);
-+	else
-+		chacha_init_generic(state, key, iv);
-+}
-+
-+void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src,
-+		       unsigned int bytes, int nrounds);
-+void chacha_crypt_generic(u32 *state, u8 *dst, const u8 *src,
-+			  unsigned int bytes, int nrounds);
-+
-+static inline void chacha_crypt(u32 *state, u8 *dst, const u8 *src,
-+				unsigned int bytes, int nrounds)
-+{
-+	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA))
-+		chacha_crypt_arch(state, dst, src, bytes, nrounds);
-+	else
-+		chacha_crypt_generic(state, dst, src, bytes, nrounds);
-+}
-+
-+static inline void chacha20_crypt(u32 *state, u8 *dst, const u8 *src,
-+				  unsigned int bytes)
-+{
-+	chacha_crypt(state, dst, src, bytes, 20);
-+}
- 
- #endif /* _CRYPTO_CHACHA_H */
---- /dev/null
-+++ b/include/crypto/internal/chacha.h
-@@ -0,0 +1,53 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+
-+#ifndef _CRYPTO_INTERNAL_CHACHA_H
-+#define _CRYPTO_INTERNAL_CHACHA_H
-+
-+#include <crypto/chacha.h>
-+#include <crypto/internal/skcipher.h>
-+#include <linux/crypto.h>
-+
-+struct chacha_ctx {
-+	u32 key[8];
-+	int nrounds;
-+};
-+
-+void crypto_chacha_init(u32 *state, const struct chacha_ctx *ctx, const u8 *iv);
-+
-+static inline int chacha_setkey(struct crypto_skcipher *tfm, const u8 *key,
-+				unsigned int keysize, int nrounds)
-+{
-+	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-+	int i;
-+
-+	if (keysize != CHACHA_KEY_SIZE)
-+		return -EINVAL;
-+
-+	for (i = 0; i < ARRAY_SIZE(ctx->key); i++)
-+		ctx->key[i] = get_unaligned_le32(key + i * sizeof(u32));
-+
-+	ctx->nrounds = nrounds;
-+	return 0;
-+}
-+
-+static inline int chacha20_setkey(struct crypto_skcipher *tfm, const u8 *key,
-+				  unsigned int keysize)
-+{
-+	return chacha_setkey(tfm, key, keysize, 20);
-+}
-+
-+static int inline chacha12_setkey(struct crypto_skcipher *tfm, const u8 *key,
-+				  unsigned int keysize)
-+{
-+	return chacha_setkey(tfm, key, keysize, 12);
-+}
-+
-+int crypto_chacha20_setkey(struct crypto_skcipher *tfm, const u8 *key,
-+			   unsigned int keysize);
-+int crypto_chacha12_setkey(struct crypto_skcipher *tfm, const u8 *key,
-+			   unsigned int keysize);
-+
-+int crypto_chacha_crypt(struct skcipher_request *req);
-+int crypto_xchacha_crypt(struct skcipher_request *req);
-+
-+#endif /* _CRYPTO_CHACHA_H */
---- a/lib/Makefile
-+++ b/lib/Makefile
-@@ -26,8 +26,7 @@ endif
- 
- lib-y := ctype.o string.o vsprintf.o cmdline.o \
- 	 rbtree.o radix-tree.o timerqueue.o xarray.o \
--	 idr.o extable.o \
--	 sha1.o chacha.o irq_regs.o argv_split.o \
-+	 idr.o extable.o sha1.o irq_regs.o argv_split.o \
- 	 flex_proportions.o ratelimit.o show_mem.o \
- 	 is_single_threaded.o plist.o decompress.o kobject_uevent.o \
- 	 earlycpio.o seq_buf.o siphash.o dec_and_lock.o \
---- a/lib/crypto/Kconfig
-+++ b/lib/crypto/Kconfig
-@@ -8,6 +8,32 @@ config CRYPTO_LIB_AES
- config CRYPTO_LIB_ARC4
- 	tristate
- 
-+config CRYPTO_ARCH_HAVE_LIB_CHACHA
-+	tristate
-+	help
-+	  Declares whether the architecture provides an arch-specific
-+	  accelerated implementation of the ChaCha library interface,
-+	  either builtin or as a module.
-+
-+config CRYPTO_LIB_CHACHA_GENERIC
-+	tristate
-+	select CRYPTO_ALGAPI
-+	help
-+	  This symbol can be depended upon by arch implementations of the
-+	  ChaCha library interface that require the generic code as a
-+	  fallback, e.g., for SIMD implementations. If no arch specific
-+	  implementation is enabled, this implementation serves the users
-+	  of CRYPTO_LIB_CHACHA.
-+
-+config CRYPTO_LIB_CHACHA
-+	tristate "ChaCha library interface"
-+	depends on CRYPTO_ARCH_HAVE_LIB_CHACHA || !CRYPTO_ARCH_HAVE_LIB_CHACHA
-+	select CRYPTO_LIB_CHACHA_GENERIC if CRYPTO_ARCH_HAVE_LIB_CHACHA=n
-+	help
-+	  Enable the ChaCha library interface. This interface may be fulfilled
-+	  by either the generic implementation or an arch-specific one, if one
-+	  is available and enabled.
-+
- config CRYPTO_LIB_DES
- 	tristate
- 
---- a/lib/crypto/Makefile
-+++ b/lib/crypto/Makefile
-@@ -1,5 +1,9 @@
- # SPDX-License-Identifier: GPL-2.0
- 
-+# chacha is used by the /dev/random driver which is always builtin
-+obj-y						+= chacha.o
-+obj-$(CONFIG_CRYPTO_LIB_CHACHA_GENERIC)		+= libchacha.o
-+
- obj-$(CONFIG_CRYPTO_LIB_AES)			+= libaes.o
- libaes-y					:= aes.o
- 
---- a/lib/chacha.c
-+++ /dev/null
-@@ -1,113 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-or-later
--/*
-- * The "hash function" used as the core of the ChaCha stream cipher (RFC7539)
-- *
-- * Copyright (C) 2015 Martin Willi
-- */
--
--#include <linux/kernel.h>
--#include <linux/export.h>
--#include <linux/bitops.h>
--#include <linux/cryptohash.h>
--#include <asm/unaligned.h>
--#include <crypto/chacha.h>
--
--static void chacha_permute(u32 *x, int nrounds)
--{
--	int i;
--
--	/* whitelist the allowed round counts */
--	WARN_ON_ONCE(nrounds != 20 && nrounds != 12);
--
--	for (i = 0; i < nrounds; i += 2) {
--		x[0]  += x[4];    x[12] = rol32(x[12] ^ x[0],  16);
--		x[1]  += x[5];    x[13] = rol32(x[13] ^ x[1],  16);
--		x[2]  += x[6];    x[14] = rol32(x[14] ^ x[2],  16);
--		x[3]  += x[7];    x[15] = rol32(x[15] ^ x[3],  16);
--
--		x[8]  += x[12];   x[4]  = rol32(x[4]  ^ x[8],  12);
--		x[9]  += x[13];   x[5]  = rol32(x[5]  ^ x[9],  12);
--		x[10] += x[14];   x[6]  = rol32(x[6]  ^ x[10], 12);
--		x[11] += x[15];   x[7]  = rol32(x[7]  ^ x[11], 12);
--
--		x[0]  += x[4];    x[12] = rol32(x[12] ^ x[0],   8);
--		x[1]  += x[5];    x[13] = rol32(x[13] ^ x[1],   8);
--		x[2]  += x[6];    x[14] = rol32(x[14] ^ x[2],   8);
--		x[3]  += x[7];    x[15] = rol32(x[15] ^ x[3],   8);
--
--		x[8]  += x[12];   x[4]  = rol32(x[4]  ^ x[8],   7);
--		x[9]  += x[13];   x[5]  = rol32(x[5]  ^ x[9],   7);
--		x[10] += x[14];   x[6]  = rol32(x[6]  ^ x[10],  7);
--		x[11] += x[15];   x[7]  = rol32(x[7]  ^ x[11],  7);
--
--		x[0]  += x[5];    x[15] = rol32(x[15] ^ x[0],  16);
--		x[1]  += x[6];    x[12] = rol32(x[12] ^ x[1],  16);
--		x[2]  += x[7];    x[13] = rol32(x[13] ^ x[2],  16);
--		x[3]  += x[4];    x[14] = rol32(x[14] ^ x[3],  16);
--
--		x[10] += x[15];   x[5]  = rol32(x[5]  ^ x[10], 12);
--		x[11] += x[12];   x[6]  = rol32(x[6]  ^ x[11], 12);
--		x[8]  += x[13];   x[7]  = rol32(x[7]  ^ x[8],  12);
--		x[9]  += x[14];   x[4]  = rol32(x[4]  ^ x[9],  12);
--
--		x[0]  += x[5];    x[15] = rol32(x[15] ^ x[0],   8);
--		x[1]  += x[6];    x[12] = rol32(x[12] ^ x[1],   8);
--		x[2]  += x[7];    x[13] = rol32(x[13] ^ x[2],   8);
--		x[3]  += x[4];    x[14] = rol32(x[14] ^ x[3],   8);
--
--		x[10] += x[15];   x[5]  = rol32(x[5]  ^ x[10],  7);
--		x[11] += x[12];   x[6]  = rol32(x[6]  ^ x[11],  7);
--		x[8]  += x[13];   x[7]  = rol32(x[7]  ^ x[8],   7);
--		x[9]  += x[14];   x[4]  = rol32(x[4]  ^ x[9],   7);
--	}
--}
--
--/**
-- * chacha_block - generate one keystream block and increment block counter
-- * @state: input state matrix (16 32-bit words)
-- * @stream: output keystream block (64 bytes)
-- * @nrounds: number of rounds (20 or 12; 20 is recommended)
-- *
-- * This is the ChaCha core, a function from 64-byte strings to 64-byte strings.
-- * The caller has already converted the endianness of the input.  This function
-- * also handles incrementing the block counter in the input matrix.
-- */
--void chacha_block(u32 *state, u8 *stream, int nrounds)
--{
--	u32 x[16];
--	int i;
--
--	memcpy(x, state, 64);
--
--	chacha_permute(x, nrounds);
--
--	for (i = 0; i < ARRAY_SIZE(x); i++)
--		put_unaligned_le32(x[i] + state[i], &stream[i * sizeof(u32)]);
--
--	state[12]++;
--}
--EXPORT_SYMBOL(chacha_block);
--
--/**
-- * hchacha_block - abbreviated ChaCha core, for XChaCha
-- * @in: input state matrix (16 32-bit words)
-- * @out: output (8 32-bit words)
-- * @nrounds: number of rounds (20 or 12; 20 is recommended)
-- *
-- * HChaCha is the ChaCha equivalent of HSalsa and is an intermediate step
-- * towards XChaCha (see https://cr.yp.to/snuffle/xsalsa-20081128.pdf).  HChaCha
-- * skips the final addition of the initial state, and outputs only certain words
-- * of the state.  It should not be used for streaming directly.
-- */
--void hchacha_block(const u32 *in, u32 *out, int nrounds)
--{
--	u32 x[16];
--
--	memcpy(x, in, 64);
--
--	chacha_permute(x, nrounds);
--
--	memcpy(&out[0], &x[0], 16);
--	memcpy(&out[4], &x[12], 16);
--}
--EXPORT_SYMBOL(hchacha_block);
---- /dev/null
-+++ b/lib/crypto/chacha.c
-@@ -0,0 +1,115 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * The "hash function" used as the core of the ChaCha stream cipher (RFC7539)
-+ *
-+ * Copyright (C) 2015 Martin Willi
-+ */
-+
-+#include <linux/bug.h>
-+#include <linux/kernel.h>
-+#include <linux/export.h>
-+#include <linux/bitops.h>
-+#include <linux/string.h>
-+#include <linux/cryptohash.h>
-+#include <asm/unaligned.h>
-+#include <crypto/chacha.h>
-+
-+static void chacha_permute(u32 *x, int nrounds)
-+{
-+	int i;
-+
-+	/* whitelist the allowed round counts */
-+	WARN_ON_ONCE(nrounds != 20 && nrounds != 12);
-+
-+	for (i = 0; i < nrounds; i += 2) {
-+		x[0]  += x[4];    x[12] = rol32(x[12] ^ x[0],  16);
-+		x[1]  += x[5];    x[13] = rol32(x[13] ^ x[1],  16);
-+		x[2]  += x[6];    x[14] = rol32(x[14] ^ x[2],  16);
-+		x[3]  += x[7];    x[15] = rol32(x[15] ^ x[3],  16);
-+
-+		x[8]  += x[12];   x[4]  = rol32(x[4]  ^ x[8],  12);
-+		x[9]  += x[13];   x[5]  = rol32(x[5]  ^ x[9],  12);
-+		x[10] += x[14];   x[6]  = rol32(x[6]  ^ x[10], 12);
-+		x[11] += x[15];   x[7]  = rol32(x[7]  ^ x[11], 12);
-+
-+		x[0]  += x[4];    x[12] = rol32(x[12] ^ x[0],   8);
-+		x[1]  += x[5];    x[13] = rol32(x[13] ^ x[1],   8);
-+		x[2]  += x[6];    x[14] = rol32(x[14] ^ x[2],   8);
-+		x[3]  += x[7];    x[15] = rol32(x[15] ^ x[3],   8);
-+
-+		x[8]  += x[12];   x[4]  = rol32(x[4]  ^ x[8],   7);
-+		x[9]  += x[13];   x[5]  = rol32(x[5]  ^ x[9],   7);
-+		x[10] += x[14];   x[6]  = rol32(x[6]  ^ x[10],  7);
-+		x[11] += x[15];   x[7]  = rol32(x[7]  ^ x[11],  7);
-+
-+		x[0]  += x[5];    x[15] = rol32(x[15] ^ x[0],  16);
-+		x[1]  += x[6];    x[12] = rol32(x[12] ^ x[1],  16);
-+		x[2]  += x[7];    x[13] = rol32(x[13] ^ x[2],  16);
-+		x[3]  += x[4];    x[14] = rol32(x[14] ^ x[3],  16);
-+
-+		x[10] += x[15];   x[5]  = rol32(x[5]  ^ x[10], 12);
-+		x[11] += x[12];   x[6]  = rol32(x[6]  ^ x[11], 12);
-+		x[8]  += x[13];   x[7]  = rol32(x[7]  ^ x[8],  12);
-+		x[9]  += x[14];   x[4]  = rol32(x[4]  ^ x[9],  12);
-+
-+		x[0]  += x[5];    x[15] = rol32(x[15] ^ x[0],   8);
-+		x[1]  += x[6];    x[12] = rol32(x[12] ^ x[1],   8);
-+		x[2]  += x[7];    x[13] = rol32(x[13] ^ x[2],   8);
-+		x[3]  += x[4];    x[14] = rol32(x[14] ^ x[3],   8);
-+
-+		x[10] += x[15];   x[5]  = rol32(x[5]  ^ x[10],  7);
-+		x[11] += x[12];   x[6]  = rol32(x[6]  ^ x[11],  7);
-+		x[8]  += x[13];   x[7]  = rol32(x[7]  ^ x[8],   7);
-+		x[9]  += x[14];   x[4]  = rol32(x[4]  ^ x[9],   7);
-+	}
-+}
-+
-+/**
-+ * chacha_block - generate one keystream block and increment block counter
-+ * @state: input state matrix (16 32-bit words)
-+ * @stream: output keystream block (64 bytes)
-+ * @nrounds: number of rounds (20 or 12; 20 is recommended)
-+ *
-+ * This is the ChaCha core, a function from 64-byte strings to 64-byte strings.
-+ * The caller has already converted the endianness of the input.  This function
-+ * also handles incrementing the block counter in the input matrix.
-+ */
-+void chacha_block_generic(u32 *state, u8 *stream, int nrounds)
-+{
-+	u32 x[16];
-+	int i;
-+
-+	memcpy(x, state, 64);
-+
-+	chacha_permute(x, nrounds);
-+
-+	for (i = 0; i < ARRAY_SIZE(x); i++)
-+		put_unaligned_le32(x[i] + state[i], &stream[i * sizeof(u32)]);
-+
-+	state[12]++;
-+}
-+EXPORT_SYMBOL(chacha_block_generic);
-+
-+/**
-+ * hchacha_block_generic - abbreviated ChaCha core, for XChaCha
-+ * @state: input state matrix (16 32-bit words)
-+ * @out: output (8 32-bit words)
-+ * @nrounds: number of rounds (20 or 12; 20 is recommended)
-+ *
-+ * HChaCha is the ChaCha equivalent of HSalsa and is an intermediate step
-+ * towards XChaCha (see https://cr.yp.to/snuffle/xsalsa-20081128.pdf).  HChaCha
-+ * skips the final addition of the initial state, and outputs only certain words
-+ * of the state.  It should not be used for streaming directly.
-+ */
-+void hchacha_block_generic(const u32 *state, u32 *stream, int nrounds)
-+{
-+	u32 x[16];
-+
-+	memcpy(x, state, 64);
-+
-+	chacha_permute(x, nrounds);
-+
-+	memcpy(&stream[0], &x[0], 16);
-+	memcpy(&stream[4], &x[12], 16);
-+}
-+EXPORT_SYMBOL(hchacha_block_generic);
---- /dev/null
-+++ b/lib/crypto/libchacha.c
-@@ -0,0 +1,35 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * The ChaCha stream cipher (RFC7539)
-+ *
-+ * Copyright (C) 2015 Martin Willi
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/export.h>
-+#include <linux/module.h>
-+
-+#include <crypto/algapi.h> // for crypto_xor_cpy
-+#include <crypto/chacha.h>
-+
-+void chacha_crypt_generic(u32 *state, u8 *dst, const u8 *src,
-+			  unsigned int bytes, int nrounds)
-+{
-+	/* aligned to potentially speed up crypto_xor() */
-+	u8 stream[CHACHA_BLOCK_SIZE] __aligned(sizeof(long));
-+
-+	while (bytes >= CHACHA_BLOCK_SIZE) {
-+		chacha_block_generic(state, stream, nrounds);
-+		crypto_xor_cpy(dst, src, stream, CHACHA_BLOCK_SIZE);
-+		bytes -= CHACHA_BLOCK_SIZE;
-+		dst += CHACHA_BLOCK_SIZE;
-+		src += CHACHA_BLOCK_SIZE;
-+	}
-+	if (bytes) {
-+		chacha_block_generic(state, stream, nrounds);
-+		crypto_xor_cpy(dst, src, stream, bytes);
-+	}
-+}
-+EXPORT_SYMBOL(chacha_crypt_generic);
-+
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0003-crypto-x86-chacha-depend-on-generic-chacha-library-i.patch b/target/linux/generic/backport-5.4/080-wireguard-0003-crypto-x86-chacha-depend-on-generic-chacha-library-i.patch
deleted file mode 100644
index b1f59cc38f..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0003-crypto-x86-chacha-depend-on-generic-chacha-library-i.patch
+++ /dev/null
@@ -1,192 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:09 +0100
-Subject: [PATCH] crypto: x86/chacha - depend on generic chacha library instead
- of crypto driver
-
-commit 28e8d89b1ce8d2e7badfb5f69971dd635acb8863 upstream.
-
-In preparation of extending the x86 ChaCha driver to also expose the ChaCha
-library interface, drop the dependency on the chacha_generic crypto driver
-as a non-SIMD fallback, and depend on the generic ChaCha library directly.
-This way, we only pull in the code we actually need, without registering
-a set of ChaCha skciphers that we will never use.
-
-Since turning the FPU on and off is cheap these days, simplify the SIMD
-routine by dropping the per-page yield, which makes for a cleaner switch
-to the library API as well. This also allows use to invoke the skcipher
-walk routines in non-atomic mode.
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/chacha_glue.c | 90 ++++++++++++++---------------------
- crypto/Kconfig                |  2 +-
- 2 files changed, 36 insertions(+), 56 deletions(-)
-
---- a/arch/x86/crypto/chacha_glue.c
-+++ b/arch/x86/crypto/chacha_glue.c
-@@ -123,37 +123,38 @@ static void chacha_dosimd(u32 *state, u8
- 	}
- }
- 
--static int chacha_simd_stream_xor(struct skcipher_walk *walk,
-+static int chacha_simd_stream_xor(struct skcipher_request *req,
- 				  const struct chacha_ctx *ctx, const u8 *iv)
- {
- 	u32 *state, state_buf[16 + 2] __aligned(8);
--	int next_yield = 4096; /* bytes until next FPU yield */
--	int err = 0;
-+	struct skcipher_walk walk;
-+	int err;
-+
-+	err = skcipher_walk_virt(&walk, req, false);
- 
- 	BUILD_BUG_ON(CHACHA_STATE_ALIGN != 16);
- 	state = PTR_ALIGN(state_buf + 0, CHACHA_STATE_ALIGN);
- 
--	crypto_chacha_init(state, ctx, iv);
-+	chacha_init_generic(state, ctx->key, iv);
- 
--	while (walk->nbytes > 0) {
--		unsigned int nbytes = walk->nbytes;
-+	while (walk.nbytes > 0) {
-+		unsigned int nbytes = walk.nbytes;
- 
--		if (nbytes < walk->total) {
--			nbytes = round_down(nbytes, walk->stride);
--			next_yield -= nbytes;
--		}
--
--		chacha_dosimd(state, walk->dst.virt.addr, walk->src.virt.addr,
--			      nbytes, ctx->nrounds);
-+		if (nbytes < walk.total)
-+			nbytes = round_down(nbytes, walk.stride);
- 
--		if (next_yield <= 0) {
--			/* temporarily allow preemption */
--			kernel_fpu_end();
-+		if (!crypto_simd_usable()) {
-+			chacha_crypt_generic(state, walk.dst.virt.addr,
-+					     walk.src.virt.addr, nbytes,
-+					     ctx->nrounds);
-+		} else {
- 			kernel_fpu_begin();
--			next_yield = 4096;
-+			chacha_dosimd(state, walk.dst.virt.addr,
-+				      walk.src.virt.addr, nbytes,
-+				      ctx->nrounds);
-+			kernel_fpu_end();
- 		}
--
--		err = skcipher_walk_done(walk, walk->nbytes - nbytes);
-+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
- 	}
- 
- 	return err;
-@@ -163,55 +164,34 @@ static int chacha_simd(struct skcipher_r
- {
- 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
- 	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
--	struct skcipher_walk walk;
--	int err;
--
--	if (req->cryptlen <= CHACHA_BLOCK_SIZE || !crypto_simd_usable())
--		return crypto_chacha_crypt(req);
- 
--	err = skcipher_walk_virt(&walk, req, true);
--	if (err)
--		return err;
--
--	kernel_fpu_begin();
--	err = chacha_simd_stream_xor(&walk, ctx, req->iv);
--	kernel_fpu_end();
--	return err;
-+	return chacha_simd_stream_xor(req, ctx, req->iv);
- }
- 
- static int xchacha_simd(struct skcipher_request *req)
- {
- 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
- 	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
--	struct skcipher_walk walk;
--	struct chacha_ctx subctx;
- 	u32 *state, state_buf[16 + 2] __aligned(8);
-+	struct chacha_ctx subctx;
- 	u8 real_iv[16];
--	int err;
--
--	if (req->cryptlen <= CHACHA_BLOCK_SIZE || !crypto_simd_usable())
--		return crypto_xchacha_crypt(req);
--
--	err = skcipher_walk_virt(&walk, req, true);
--	if (err)
--		return err;
- 
- 	BUILD_BUG_ON(CHACHA_STATE_ALIGN != 16);
- 	state = PTR_ALIGN(state_buf + 0, CHACHA_STATE_ALIGN);
--	crypto_chacha_init(state, ctx, req->iv);
-+	chacha_init_generic(state, ctx->key, req->iv);
- 
--	kernel_fpu_begin();
--
--	hchacha_block_ssse3(state, subctx.key, ctx->nrounds);
-+	if (req->cryptlen > CHACHA_BLOCK_SIZE && crypto_simd_usable()) {
-+		kernel_fpu_begin();
-+		hchacha_block_ssse3(state, subctx.key, ctx->nrounds);
-+		kernel_fpu_end();
-+	} else {
-+		hchacha_block_generic(state, subctx.key, ctx->nrounds);
-+	}
- 	subctx.nrounds = ctx->nrounds;
- 
- 	memcpy(&real_iv[0], req->iv + 24, 8);
- 	memcpy(&real_iv[8], req->iv + 16, 8);
--	err = chacha_simd_stream_xor(&walk, &subctx, real_iv);
--
--	kernel_fpu_end();
--
--	return err;
-+	return chacha_simd_stream_xor(req, &subctx, real_iv);
- }
- 
- static struct skcipher_alg algs[] = {
-@@ -227,7 +207,7 @@ static struct skcipher_alg algs[] = {
- 		.max_keysize		= CHACHA_KEY_SIZE,
- 		.ivsize			= CHACHA_IV_SIZE,
- 		.chunksize		= CHACHA_BLOCK_SIZE,
--		.setkey			= crypto_chacha20_setkey,
-+		.setkey			= chacha20_setkey,
- 		.encrypt		= chacha_simd,
- 		.decrypt		= chacha_simd,
- 	}, {
-@@ -242,7 +222,7 @@ static struct skcipher_alg algs[] = {
- 		.max_keysize		= CHACHA_KEY_SIZE,
- 		.ivsize			= XCHACHA_IV_SIZE,
- 		.chunksize		= CHACHA_BLOCK_SIZE,
--		.setkey			= crypto_chacha20_setkey,
-+		.setkey			= chacha20_setkey,
- 		.encrypt		= xchacha_simd,
- 		.decrypt		= xchacha_simd,
- 	}, {
-@@ -257,7 +237,7 @@ static struct skcipher_alg algs[] = {
- 		.max_keysize		= CHACHA_KEY_SIZE,
- 		.ivsize			= XCHACHA_IV_SIZE,
- 		.chunksize		= CHACHA_BLOCK_SIZE,
--		.setkey			= crypto_chacha12_setkey,
-+		.setkey			= chacha12_setkey,
- 		.encrypt		= xchacha_simd,
- 		.decrypt		= xchacha_simd,
- 	},
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -1417,7 +1417,7 @@ config CRYPTO_CHACHA20_X86_64
- 	tristate "ChaCha stream cipher algorithms (x86_64/SSSE3/AVX2/AVX-512VL)"
- 	depends on X86 && 64BIT
- 	select CRYPTO_BLKCIPHER
--	select CRYPTO_CHACHA20
-+	select CRYPTO_LIB_CHACHA_GENERIC
- 	help
- 	  SSSE3, AVX2, and AVX-512VL optimized implementations of the ChaCha20,
- 	  XChaCha20, and XChaCha12 stream ciphers.
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0004-crypto-x86-chacha-expose-SIMD-ChaCha-routine-as-libr.patch b/target/linux/generic/backport-5.4/080-wireguard-0004-crypto-x86-chacha-expose-SIMD-ChaCha-routine-as-libr.patch
deleted file mode 100644
index 0e5462837b..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0004-crypto-x86-chacha-expose-SIMD-ChaCha-routine-as-libr.patch
+++ /dev/null
@@ -1,205 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:10 +0100
-Subject: [PATCH] crypto: x86/chacha - expose SIMD ChaCha routine as library
- function
-
-commit 84e03fa39fbe95a5567d43bff458c6d3b3a23ad1 upstream.
-
-Wire the existing x86 SIMD ChaCha code into the new ChaCha library
-interface, so that users of the library interface will get the
-accelerated version when available.
-
-Given that calls into the library API will always go through the
-routines in this module if it is enabled, switch to static keys
-to select the optimal implementation available (which may be none
-at all, in which case we defer to the generic implementation for
-all invocations).
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/chacha_glue.c | 91 +++++++++++++++++++++++++----------
- crypto/Kconfig                |  1 +
- include/crypto/chacha.h       |  6 +++
- 3 files changed, 73 insertions(+), 25 deletions(-)
-
---- a/arch/x86/crypto/chacha_glue.c
-+++ b/arch/x86/crypto/chacha_glue.c
-@@ -21,24 +21,24 @@ asmlinkage void chacha_block_xor_ssse3(u
- asmlinkage void chacha_4block_xor_ssse3(u32 *state, u8 *dst, const u8 *src,
- 					unsigned int len, int nrounds);
- asmlinkage void hchacha_block_ssse3(const u32 *state, u32 *out, int nrounds);
--#ifdef CONFIG_AS_AVX2
-+
- asmlinkage void chacha_2block_xor_avx2(u32 *state, u8 *dst, const u8 *src,
- 				       unsigned int len, int nrounds);
- asmlinkage void chacha_4block_xor_avx2(u32 *state, u8 *dst, const u8 *src,
- 				       unsigned int len, int nrounds);
- asmlinkage void chacha_8block_xor_avx2(u32 *state, u8 *dst, const u8 *src,
- 				       unsigned int len, int nrounds);
--static bool chacha_use_avx2;
--#ifdef CONFIG_AS_AVX512
-+
- asmlinkage void chacha_2block_xor_avx512vl(u32 *state, u8 *dst, const u8 *src,
- 					   unsigned int len, int nrounds);
- asmlinkage void chacha_4block_xor_avx512vl(u32 *state, u8 *dst, const u8 *src,
- 					   unsigned int len, int nrounds);
- asmlinkage void chacha_8block_xor_avx512vl(u32 *state, u8 *dst, const u8 *src,
- 					   unsigned int len, int nrounds);
--static bool chacha_use_avx512vl;
--#endif
--#endif
-+
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(chacha_use_simd);
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(chacha_use_avx2);
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(chacha_use_avx512vl);
- 
- static unsigned int chacha_advance(unsigned int len, unsigned int maxblocks)
- {
-@@ -49,9 +49,8 @@ static unsigned int chacha_advance(unsig
- static void chacha_dosimd(u32 *state, u8 *dst, const u8 *src,
- 			  unsigned int bytes, int nrounds)
- {
--#ifdef CONFIG_AS_AVX2
--#ifdef CONFIG_AS_AVX512
--	if (chacha_use_avx512vl) {
-+	if (IS_ENABLED(CONFIG_AS_AVX512) &&
-+	    static_branch_likely(&chacha_use_avx512vl)) {
- 		while (bytes >= CHACHA_BLOCK_SIZE * 8) {
- 			chacha_8block_xor_avx512vl(state, dst, src, bytes,
- 						   nrounds);
-@@ -79,8 +78,9 @@ static void chacha_dosimd(u32 *state, u8
- 			return;
- 		}
- 	}
--#endif
--	if (chacha_use_avx2) {
-+
-+	if (IS_ENABLED(CONFIG_AS_AVX2) &&
-+	    static_branch_likely(&chacha_use_avx2)) {
- 		while (bytes >= CHACHA_BLOCK_SIZE * 8) {
- 			chacha_8block_xor_avx2(state, dst, src, bytes, nrounds);
- 			bytes -= CHACHA_BLOCK_SIZE * 8;
-@@ -104,7 +104,7 @@ static void chacha_dosimd(u32 *state, u8
- 			return;
- 		}
- 	}
--#endif
-+
- 	while (bytes >= CHACHA_BLOCK_SIZE * 4) {
- 		chacha_4block_xor_ssse3(state, dst, src, bytes, nrounds);
- 		bytes -= CHACHA_BLOCK_SIZE * 4;
-@@ -123,6 +123,43 @@ static void chacha_dosimd(u32 *state, u8
- 	}
- }
- 
-+void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds)
-+{
-+	state = PTR_ALIGN(state, CHACHA_STATE_ALIGN);
-+
-+	if (!static_branch_likely(&chacha_use_simd) || !crypto_simd_usable()) {
-+		hchacha_block_generic(state, stream, nrounds);
-+	} else {
-+		kernel_fpu_begin();
-+		hchacha_block_ssse3(state, stream, nrounds);
-+		kernel_fpu_end();
-+	}
-+}
-+EXPORT_SYMBOL(hchacha_block_arch);
-+
-+void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv)
-+{
-+	state = PTR_ALIGN(state, CHACHA_STATE_ALIGN);
-+
-+	chacha_init_generic(state, key, iv);
-+}
-+EXPORT_SYMBOL(chacha_init_arch);
-+
-+void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes,
-+		       int nrounds)
-+{
-+	state = PTR_ALIGN(state, CHACHA_STATE_ALIGN);
-+
-+	if (!static_branch_likely(&chacha_use_simd) || !crypto_simd_usable() ||
-+	    bytes <= CHACHA_BLOCK_SIZE)
-+		return chacha_crypt_generic(state, dst, src, bytes, nrounds);
-+
-+	kernel_fpu_begin();
-+	chacha_dosimd(state, dst, src, bytes, nrounds);
-+	kernel_fpu_end();
-+}
-+EXPORT_SYMBOL(chacha_crypt_arch);
-+
- static int chacha_simd_stream_xor(struct skcipher_request *req,
- 				  const struct chacha_ctx *ctx, const u8 *iv)
- {
-@@ -143,7 +180,8 @@ static int chacha_simd_stream_xor(struct
- 		if (nbytes < walk.total)
- 			nbytes = round_down(nbytes, walk.stride);
- 
--		if (!crypto_simd_usable()) {
-+		if (!static_branch_likely(&chacha_use_simd) ||
-+		    !crypto_simd_usable()) {
- 			chacha_crypt_generic(state, walk.dst.virt.addr,
- 					     walk.src.virt.addr, nbytes,
- 					     ctx->nrounds);
-@@ -246,18 +284,21 @@ static struct skcipher_alg algs[] = {
- static int __init chacha_simd_mod_init(void)
- {
- 	if (!boot_cpu_has(X86_FEATURE_SSSE3))
--		return -ENODEV;
-+		return 0;
- 
--#ifdef CONFIG_AS_AVX2
--	chacha_use_avx2 = boot_cpu_has(X86_FEATURE_AVX) &&
--			  boot_cpu_has(X86_FEATURE_AVX2) &&
--			  cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM, NULL);
--#ifdef CONFIG_AS_AVX512
--	chacha_use_avx512vl = chacha_use_avx2 &&
--			      boot_cpu_has(X86_FEATURE_AVX512VL) &&
--			      boot_cpu_has(X86_FEATURE_AVX512BW); /* kmovq */
--#endif
--#endif
-+	static_branch_enable(&chacha_use_simd);
-+
-+	if (IS_ENABLED(CONFIG_AS_AVX2) &&
-+	    boot_cpu_has(X86_FEATURE_AVX) &&
-+	    boot_cpu_has(X86_FEATURE_AVX2) &&
-+	    cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM, NULL)) {
-+		static_branch_enable(&chacha_use_avx2);
-+
-+		if (IS_ENABLED(CONFIG_AS_AVX512) &&
-+		    boot_cpu_has(X86_FEATURE_AVX512VL) &&
-+		    boot_cpu_has(X86_FEATURE_AVX512BW)) /* kmovq */
-+			static_branch_enable(&chacha_use_avx512vl);
-+	}
- 	return crypto_register_skciphers(algs, ARRAY_SIZE(algs));
- }
- 
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -1418,6 +1418,7 @@ config CRYPTO_CHACHA20_X86_64
- 	depends on X86 && 64BIT
- 	select CRYPTO_BLKCIPHER
- 	select CRYPTO_LIB_CHACHA_GENERIC
-+	select CRYPTO_ARCH_HAVE_LIB_CHACHA
- 	help
- 	  SSSE3, AVX2, and AVX-512VL optimized implementations of the ChaCha20,
- 	  XChaCha20, and XChaCha12 stream ciphers.
---- a/include/crypto/chacha.h
-+++ b/include/crypto/chacha.h
-@@ -25,6 +25,12 @@
- #define CHACHA_BLOCK_SIZE	64
- #define CHACHAPOLY_IV_SIZE	12
- 
-+#ifdef CONFIG_X86_64
-+#define CHACHA_STATE_WORDS	((CHACHA_BLOCK_SIZE + 12) / sizeof(u32))
-+#else
-+#define CHACHA_STATE_WORDS	(CHACHA_BLOCK_SIZE / sizeof(u32))
-+#endif
-+
- /* 192-bit nonce, then 64-bit stream position */
- #define XCHACHA_IV_SIZE		32
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0005-crypto-arm64-chacha-depend-on-generic-chacha-library.patch b/target/linux/generic/backport-5.4/080-wireguard-0005-crypto-arm64-chacha-depend-on-generic-chacha-library.patch
deleted file mode 100644
index 10e49c192c..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0005-crypto-arm64-chacha-depend-on-generic-chacha-library.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:11 +0100
-Subject: [PATCH] crypto: arm64/chacha - depend on generic chacha library
- instead of crypto driver
-
-commit c77da4867cbb7841177275dbb250f5c09679fae4 upstream.
-
-Depend on the generic ChaCha library routines instead of pulling in the
-generic ChaCha skcipher driver, which is more than we need, and makes
-managing the dependencies between the generic library, generic driver,
-accelerated library and driver more complicated.
-
-While at it, drop the logic to prefer the scalar code on short inputs.
-Turning the NEON on and off is cheap these days, and one major use case
-for ChaCha20 is ChaCha20-Poly1305, which is guaranteed to hit the scalar
-path upon every invocation  (when doing the Poly1305 nonce generation)
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm64/crypto/Kconfig            |  2 +-
- arch/arm64/crypto/chacha-neon-glue.c | 40 +++++++++++++++-------------
- 2 files changed, 23 insertions(+), 19 deletions(-)
-
---- a/arch/arm64/crypto/Kconfig
-+++ b/arch/arm64/crypto/Kconfig
-@@ -103,7 +103,7 @@ config CRYPTO_CHACHA20_NEON
- 	tristate "ChaCha20, XChaCha20, and XChaCha12 stream ciphers using NEON instructions"
- 	depends on KERNEL_MODE_NEON
- 	select CRYPTO_BLKCIPHER
--	select CRYPTO_CHACHA20
-+	select CRYPTO_LIB_CHACHA_GENERIC
- 
- config CRYPTO_NHPOLY1305_NEON
- 	tristate "NHPoly1305 hash function using NEON instructions (for Adiantum)"
---- a/arch/arm64/crypto/chacha-neon-glue.c
-+++ b/arch/arm64/crypto/chacha-neon-glue.c
-@@ -68,7 +68,7 @@ static int chacha_neon_stream_xor(struct
- 
- 	err = skcipher_walk_virt(&walk, req, false);
- 
--	crypto_chacha_init(state, ctx, iv);
-+	chacha_init_generic(state, ctx->key, iv);
- 
- 	while (walk.nbytes > 0) {
- 		unsigned int nbytes = walk.nbytes;
-@@ -76,10 +76,16 @@ static int chacha_neon_stream_xor(struct
- 		if (nbytes < walk.total)
- 			nbytes = rounddown(nbytes, walk.stride);
- 
--		kernel_neon_begin();
--		chacha_doneon(state, walk.dst.virt.addr, walk.src.virt.addr,
--			      nbytes, ctx->nrounds);
--		kernel_neon_end();
-+		if (!crypto_simd_usable()) {
-+			chacha_crypt_generic(state, walk.dst.virt.addr,
-+					     walk.src.virt.addr, nbytes,
-+					     ctx->nrounds);
-+		} else {
-+			kernel_neon_begin();
-+			chacha_doneon(state, walk.dst.virt.addr,
-+				      walk.src.virt.addr, nbytes, ctx->nrounds);
-+			kernel_neon_end();
-+		}
- 		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
- 	}
- 
-@@ -91,9 +97,6 @@ static int chacha_neon(struct skcipher_r
- 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
- 	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
- 
--	if (req->cryptlen <= CHACHA_BLOCK_SIZE || !crypto_simd_usable())
--		return crypto_chacha_crypt(req);
--
- 	return chacha_neon_stream_xor(req, ctx, req->iv);
- }
- 
-@@ -105,14 +108,15 @@ static int xchacha_neon(struct skcipher_
- 	u32 state[16];
- 	u8 real_iv[16];
- 
--	if (req->cryptlen <= CHACHA_BLOCK_SIZE || !crypto_simd_usable())
--		return crypto_xchacha_crypt(req);
--
--	crypto_chacha_init(state, ctx, req->iv);
-+	chacha_init_generic(state, ctx->key, req->iv);
- 
--	kernel_neon_begin();
--	hchacha_block_neon(state, subctx.key, ctx->nrounds);
--	kernel_neon_end();
-+	if (crypto_simd_usable()) {
-+		kernel_neon_begin();
-+		hchacha_block_neon(state, subctx.key, ctx->nrounds);
-+		kernel_neon_end();
-+	} else {
-+		hchacha_block_generic(state, subctx.key, ctx->nrounds);
-+	}
- 	subctx.nrounds = ctx->nrounds;
- 
- 	memcpy(&real_iv[0], req->iv + 24, 8);
-@@ -134,7 +138,7 @@ static struct skcipher_alg algs[] = {
- 		.ivsize			= CHACHA_IV_SIZE,
- 		.chunksize		= CHACHA_BLOCK_SIZE,
- 		.walksize		= 5 * CHACHA_BLOCK_SIZE,
--		.setkey			= crypto_chacha20_setkey,
-+		.setkey			= chacha20_setkey,
- 		.encrypt		= chacha_neon,
- 		.decrypt		= chacha_neon,
- 	}, {
-@@ -150,7 +154,7 @@ static struct skcipher_alg algs[] = {
- 		.ivsize			= XCHACHA_IV_SIZE,
- 		.chunksize		= CHACHA_BLOCK_SIZE,
- 		.walksize		= 5 * CHACHA_BLOCK_SIZE,
--		.setkey			= crypto_chacha20_setkey,
-+		.setkey			= chacha20_setkey,
- 		.encrypt		= xchacha_neon,
- 		.decrypt		= xchacha_neon,
- 	}, {
-@@ -166,7 +170,7 @@ static struct skcipher_alg algs[] = {
- 		.ivsize			= XCHACHA_IV_SIZE,
- 		.chunksize		= CHACHA_BLOCK_SIZE,
- 		.walksize		= 5 * CHACHA_BLOCK_SIZE,
--		.setkey			= crypto_chacha12_setkey,
-+		.setkey			= chacha12_setkey,
- 		.encrypt		= xchacha_neon,
- 		.decrypt		= xchacha_neon,
- 	}
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0006-crypto-arm64-chacha-expose-arm64-ChaCha-routine-as-l.patch b/target/linux/generic/backport-5.4/080-wireguard-0006-crypto-arm64-chacha-expose-arm64-ChaCha-routine-as-l.patch
deleted file mode 100644
index 71665e8bfd..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0006-crypto-arm64-chacha-expose-arm64-ChaCha-routine-as-l.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:12 +0100
-Subject: [PATCH] crypto: arm64/chacha - expose arm64 ChaCha routine as library
- function
-
-commit b3aad5bad26a01a4bd8c49a5c5f52aec665f3b7c upstream.
-
-Expose the accelerated NEON ChaCha routine directly as a symbol
-export so that users of the ChaCha library API can use it directly.
-
-Given that calls into the library API will always go through the
-routines in this module if it is enabled, switch to static keys
-to select the optimal implementation available (which may be none
-at all, in which case we defer to the generic implementation for
-all invocations).
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm64/crypto/Kconfig            |  1 +
- arch/arm64/crypto/chacha-neon-glue.c | 53 ++++++++++++++++++++++------
- 2 files changed, 43 insertions(+), 11 deletions(-)
-
---- a/arch/arm64/crypto/Kconfig
-+++ b/arch/arm64/crypto/Kconfig
-@@ -104,6 +104,7 @@ config CRYPTO_CHACHA20_NEON
- 	depends on KERNEL_MODE_NEON
- 	select CRYPTO_BLKCIPHER
- 	select CRYPTO_LIB_CHACHA_GENERIC
-+	select CRYPTO_ARCH_HAVE_LIB_CHACHA
- 
- config CRYPTO_NHPOLY1305_NEON
- 	tristate "NHPoly1305 hash function using NEON instructions (for Adiantum)"
---- a/arch/arm64/crypto/chacha-neon-glue.c
-+++ b/arch/arm64/crypto/chacha-neon-glue.c
-@@ -23,6 +23,7 @@
- #include <crypto/internal/chacha.h>
- #include <crypto/internal/simd.h>
- #include <crypto/internal/skcipher.h>
-+#include <linux/jump_label.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- 
-@@ -36,6 +37,8 @@ asmlinkage void chacha_4block_xor_neon(u
- 				       int nrounds, int bytes);
- asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds);
- 
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-+
- static void chacha_doneon(u32 *state, u8 *dst, const u8 *src,
- 			  int bytes, int nrounds)
- {
-@@ -59,6 +62,37 @@ static void chacha_doneon(u32 *state, u8
- 	}
- }
- 
-+void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds)
-+{
-+	if (!static_branch_likely(&have_neon) || !crypto_simd_usable()) {
-+		hchacha_block_generic(state, stream, nrounds);
-+	} else {
-+		kernel_neon_begin();
-+		hchacha_block_neon(state, stream, nrounds);
-+		kernel_neon_end();
-+	}
-+}
-+EXPORT_SYMBOL(hchacha_block_arch);
-+
-+void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv)
-+{
-+	chacha_init_generic(state, key, iv);
-+}
-+EXPORT_SYMBOL(chacha_init_arch);
-+
-+void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes,
-+		       int nrounds)
-+{
-+	if (!static_branch_likely(&have_neon) || bytes <= CHACHA_BLOCK_SIZE ||
-+	    !crypto_simd_usable())
-+		return chacha_crypt_generic(state, dst, src, bytes, nrounds);
-+
-+	kernel_neon_begin();
-+	chacha_doneon(state, dst, src, bytes, nrounds);
-+	kernel_neon_end();
-+}
-+EXPORT_SYMBOL(chacha_crypt_arch);
-+
- static int chacha_neon_stream_xor(struct skcipher_request *req,
- 				  const struct chacha_ctx *ctx, const u8 *iv)
- {
-@@ -76,7 +110,8 @@ static int chacha_neon_stream_xor(struct
- 		if (nbytes < walk.total)
- 			nbytes = rounddown(nbytes, walk.stride);
- 
--		if (!crypto_simd_usable()) {
-+		if (!static_branch_likely(&have_neon) ||
-+		    !crypto_simd_usable()) {
- 			chacha_crypt_generic(state, walk.dst.virt.addr,
- 					     walk.src.virt.addr, nbytes,
- 					     ctx->nrounds);
-@@ -109,14 +144,7 @@ static int xchacha_neon(struct skcipher_
- 	u8 real_iv[16];
- 
- 	chacha_init_generic(state, ctx->key, req->iv);
--
--	if (crypto_simd_usable()) {
--		kernel_neon_begin();
--		hchacha_block_neon(state, subctx.key, ctx->nrounds);
--		kernel_neon_end();
--	} else {
--		hchacha_block_generic(state, subctx.key, ctx->nrounds);
--	}
-+	hchacha_block_arch(state, subctx.key, ctx->nrounds);
- 	subctx.nrounds = ctx->nrounds;
- 
- 	memcpy(&real_iv[0], req->iv + 24, 8);
-@@ -179,14 +207,17 @@ static struct skcipher_alg algs[] = {
- static int __init chacha_simd_mod_init(void)
- {
- 	if (!cpu_have_named_feature(ASIMD))
--		return -ENODEV;
-+		return 0;
-+
-+	static_branch_enable(&have_neon);
- 
- 	return crypto_register_skciphers(algs, ARRAY_SIZE(algs));
- }
- 
- static void __exit chacha_simd_mod_fini(void)
- {
--	crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
-+	if (cpu_have_named_feature(ASIMD))
-+		crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
- }
- 
- module_init(chacha_simd_mod_init);
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0007-crypto-arm-chacha-import-Eric-Biggers-s-scalar-accel.patch b/target/linux/generic/backport-5.4/080-wireguard-0007-crypto-arm-chacha-import-Eric-Biggers-s-scalar-accel.patch
deleted file mode 100644
index 978f2f55be..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0007-crypto-arm-chacha-import-Eric-Biggers-s-scalar-accel.patch
+++ /dev/null
@@ -1,480 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:13 +0100
-Subject: [PATCH] crypto: arm/chacha - import Eric Biggers's scalar accelerated
- ChaCha code
-
-commit 29621d099f9c642b22a69dc8e7e20c108473a392 upstream.
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/chacha-scalar-core.S | 461 +++++++++++++++++++++++++++
- 1 file changed, 461 insertions(+)
- create mode 100644 arch/arm/crypto/chacha-scalar-core.S
-
---- /dev/null
-+++ b/arch/arm/crypto/chacha-scalar-core.S
-@@ -0,0 +1,461 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2018 Google, Inc.
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/assembler.h>
-+
-+/*
-+ * Design notes:
-+ *
-+ * 16 registers would be needed to hold the state matrix, but only 14 are
-+ * available because 'sp' and 'pc' cannot be used.  So we spill the elements
-+ * (x8, x9) to the stack and swap them out with (x10, x11).  This adds one
-+ * 'ldrd' and one 'strd' instruction per round.
-+ *
-+ * All rotates are performed using the implicit rotate operand accepted by the
-+ * 'add' and 'eor' instructions.  This is faster than using explicit rotate
-+ * instructions.  To make this work, we allow the values in the second and last
-+ * rows of the ChaCha state matrix (rows 'b' and 'd') to temporarily have the
-+ * wrong rotation amount.  The rotation amount is then fixed up just in time
-+ * when the values are used.  'brot' is the number of bits the values in row 'b'
-+ * need to be rotated right to arrive at the correct values, and 'drot'
-+ * similarly for row 'd'.  (brot, drot) start out as (0, 0) but we make it such
-+ * that they end up as (25, 24) after every round.
-+ */
-+
-+	// ChaCha state registers
-+	X0	.req	r0
-+	X1	.req	r1
-+	X2	.req	r2
-+	X3	.req	r3
-+	X4	.req	r4
-+	X5	.req	r5
-+	X6	.req	r6
-+	X7	.req	r7
-+	X8_X10	.req	r8	// shared by x8 and x10
-+	X9_X11	.req	r9	// shared by x9 and x11
-+	X12	.req	r10
-+	X13	.req	r11
-+	X14	.req	r12
-+	X15	.req	r14
-+
-+.Lexpand_32byte_k:
-+	// "expand 32-byte k"
-+	.word	0x61707865, 0x3320646e, 0x79622d32, 0x6b206574
-+
-+#ifdef __thumb2__
-+#  define adrl adr
-+#endif
-+
-+.macro __rev		out, in,  t0, t1, t2
-+.if __LINUX_ARM_ARCH__ >= 6
-+	rev		\out, \in
-+.else
-+	lsl		\t0, \in, #24
-+	and		\t1, \in, #0xff00
-+	and		\t2, \in, #0xff0000
-+	orr		\out, \t0, \in, lsr #24
-+	orr		\out, \out, \t1, lsl #8
-+	orr		\out, \out, \t2, lsr #8
-+.endif
-+.endm
-+
-+.macro _le32_bswap	x,  t0, t1, t2
-+#ifdef __ARMEB__
-+	__rev		\x, \x,  \t0, \t1, \t2
-+#endif
-+.endm
-+
-+.macro _le32_bswap_4x	a, b, c, d,  t0, t1, t2
-+	_le32_bswap	\a,  \t0, \t1, \t2
-+	_le32_bswap	\b,  \t0, \t1, \t2
-+	_le32_bswap	\c,  \t0, \t1, \t2
-+	_le32_bswap	\d,  \t0, \t1, \t2
-+.endm
-+
-+.macro __ldrd		a, b, src, offset
-+#if __LINUX_ARM_ARCH__ >= 6
-+	ldrd		\a, \b, [\src, #\offset]
-+#else
-+	ldr		\a, [\src, #\offset]
-+	ldr		\b, [\src, #\offset + 4]
-+#endif
-+.endm
-+
-+.macro __strd		a, b, dst, offset
-+#if __LINUX_ARM_ARCH__ >= 6
-+	strd		\a, \b, [\dst, #\offset]
-+#else
-+	str		\a, [\dst, #\offset]
-+	str		\b, [\dst, #\offset + 4]
-+#endif
-+.endm
-+
-+.macro _halfround	a1, b1, c1, d1,  a2, b2, c2, d2
-+
-+	// a += b; d ^= a; d = rol(d, 16);
-+	add		\a1, \a1, \b1, ror #brot
-+	add		\a2, \a2, \b2, ror #brot
-+	eor		\d1, \a1, \d1, ror #drot
-+	eor		\d2, \a2, \d2, ror #drot
-+	// drot == 32 - 16 == 16
-+
-+	// c += d; b ^= c; b = rol(b, 12);
-+	add		\c1, \c1, \d1, ror #16
-+	add		\c2, \c2, \d2, ror #16
-+	eor		\b1, \c1, \b1, ror #brot
-+	eor		\b2, \c2, \b2, ror #brot
-+	// brot == 32 - 12 == 20
-+
-+	// a += b; d ^= a; d = rol(d, 8);
-+	add		\a1, \a1, \b1, ror #20
-+	add		\a2, \a2, \b2, ror #20
-+	eor		\d1, \a1, \d1, ror #16
-+	eor		\d2, \a2, \d2, ror #16
-+	// drot == 32 - 8 == 24
-+
-+	// c += d; b ^= c; b = rol(b, 7);
-+	add		\c1, \c1, \d1, ror #24
-+	add		\c2, \c2, \d2, ror #24
-+	eor		\b1, \c1, \b1, ror #20
-+	eor		\b2, \c2, \b2, ror #20
-+	// brot == 32 - 7 == 25
-+.endm
-+
-+.macro _doubleround
-+
-+	// column round
-+
-+	// quarterrounds: (x0, x4, x8, x12) and (x1, x5, x9, x13)
-+	_halfround	X0, X4, X8_X10, X12,  X1, X5, X9_X11, X13
-+
-+	// save (x8, x9); restore (x10, x11)
-+	__strd		X8_X10, X9_X11, sp, 0
-+	__ldrd		X8_X10, X9_X11, sp, 8
-+
-+	// quarterrounds: (x2, x6, x10, x14) and (x3, x7, x11, x15)
-+	_halfround	X2, X6, X8_X10, X14,  X3, X7, X9_X11, X15
-+
-+	.set brot, 25
-+	.set drot, 24
-+
-+	// diagonal round
-+
-+	// quarterrounds: (x0, x5, x10, x15) and (x1, x6, x11, x12)
-+	_halfround	X0, X5, X8_X10, X15,  X1, X6, X9_X11, X12
-+
-+	// save (x10, x11); restore (x8, x9)
-+	__strd		X8_X10, X9_X11, sp, 8
-+	__ldrd		X8_X10, X9_X11, sp, 0
-+
-+	// quarterrounds: (x2, x7, x8, x13) and (x3, x4, x9, x14)
-+	_halfround	X2, X7, X8_X10, X13,  X3, X4, X9_X11, X14
-+.endm
-+
-+.macro _chacha_permute	nrounds
-+	.set brot, 0
-+	.set drot, 0
-+	.rept \nrounds / 2
-+	 _doubleround
-+	.endr
-+.endm
-+
-+.macro _chacha		nrounds
-+
-+.Lnext_block\@:
-+	// Stack: unused0-unused1 x10-x11 x0-x15 OUT IN LEN
-+	// Registers contain x0-x9,x12-x15.
-+
-+	// Do the core ChaCha permutation to update x0-x15.
-+	_chacha_permute	\nrounds
-+
-+	add		sp, #8
-+	// Stack: x10-x11 orig_x0-orig_x15 OUT IN LEN
-+	// Registers contain x0-x9,x12-x15.
-+	// x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'.
-+
-+	// Free up some registers (r8-r12,r14) by pushing (x8-x9,x12-x15).
-+	push		{X8_X10, X9_X11, X12, X13, X14, X15}
-+
-+	// Load (OUT, IN, LEN).
-+	ldr		r14, [sp, #96]
-+	ldr		r12, [sp, #100]
-+	ldr		r11, [sp, #104]
-+
-+	orr		r10, r14, r12
-+
-+	// Use slow path if fewer than 64 bytes remain.
-+	cmp		r11, #64
-+	blt		.Lxor_slowpath\@
-+
-+	// Use slow path if IN and/or OUT isn't 4-byte aligned.  Needed even on
-+	// ARMv6+, since ldmia and stmia (used below) still require alignment.
-+	tst		r10, #3
-+	bne		.Lxor_slowpath\@
-+
-+	// Fast path: XOR 64 bytes of aligned data.
-+
-+	// Stack: x8-x9 x12-x15 x10-x11 orig_x0-orig_x15 OUT IN LEN
-+	// Registers: r0-r7 are x0-x7; r8-r11 are free; r12 is IN; r14 is OUT.
-+	// x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'.
-+
-+	// x0-x3
-+	__ldrd		r8, r9, sp, 32
-+	__ldrd		r10, r11, sp, 40
-+	add		X0, X0, r8
-+	add		X1, X1, r9
-+	add		X2, X2, r10
-+	add		X3, X3, r11
-+	_le32_bswap_4x	X0, X1, X2, X3,  r8, r9, r10
-+	ldmia		r12!, {r8-r11}
-+	eor		X0, X0, r8
-+	eor		X1, X1, r9
-+	eor		X2, X2, r10
-+	eor		X3, X3, r11
-+	stmia		r14!, {X0-X3}
-+
-+	// x4-x7
-+	__ldrd		r8, r9, sp, 48
-+	__ldrd		r10, r11, sp, 56
-+	add		X4, r8, X4, ror #brot
-+	add		X5, r9, X5, ror #brot
-+	ldmia		r12!, {X0-X3}
-+	add		X6, r10, X6, ror #brot
-+	add		X7, r11, X7, ror #brot
-+	_le32_bswap_4x	X4, X5, X6, X7,  r8, r9, r10
-+	eor		X4, X4, X0
-+	eor		X5, X5, X1
-+	eor		X6, X6, X2
-+	eor		X7, X7, X3
-+	stmia		r14!, {X4-X7}
-+
-+	// x8-x15
-+	pop		{r0-r7}			// (x8-x9,x12-x15,x10-x11)
-+	__ldrd		r8, r9, sp, 32
-+	__ldrd		r10, r11, sp, 40
-+	add		r0, r0, r8		// x8
-+	add		r1, r1, r9		// x9
-+	add		r6, r6, r10		// x10
-+	add		r7, r7, r11		// x11
-+	_le32_bswap_4x	r0, r1, r6, r7,  r8, r9, r10
-+	ldmia		r12!, {r8-r11}
-+	eor		r0, r0, r8		// x8
-+	eor		r1, r1, r9		// x9
-+	eor		r6, r6, r10		// x10
-+	eor		r7, r7, r11		// x11
-+	stmia		r14!, {r0,r1,r6,r7}
-+	ldmia		r12!, {r0,r1,r6,r7}
-+	__ldrd		r8, r9, sp, 48
-+	__ldrd		r10, r11, sp, 56
-+	add		r2, r8, r2, ror #drot	// x12
-+	add		r3, r9, r3, ror #drot	// x13
-+	add		r4, r10, r4, ror #drot	// x14
-+	add		r5, r11, r5, ror #drot	// x15
-+	_le32_bswap_4x	r2, r3, r4, r5,  r9, r10, r11
-+	  ldr		r9, [sp, #72]		// load LEN
-+	eor		r2, r2, r0		// x12
-+	eor		r3, r3, r1		// x13
-+	eor		r4, r4, r6		// x14
-+	eor		r5, r5, r7		// x15
-+	  subs		r9, #64			// decrement and check LEN
-+	stmia		r14!, {r2-r5}
-+
-+	beq		.Ldone\@
-+
-+.Lprepare_for_next_block\@:
-+
-+	// Stack: x0-x15 OUT IN LEN
-+
-+	// Increment block counter (x12)
-+	add		r8, #1
-+
-+	// Store updated (OUT, IN, LEN)
-+	str		r14, [sp, #64]
-+	str		r12, [sp, #68]
-+	str		r9, [sp, #72]
-+
-+	  mov		r14, sp
-+
-+	// Store updated block counter (x12)
-+	str		r8, [sp, #48]
-+
-+	  sub		sp, #16
-+
-+	// Reload state and do next block
-+	ldmia		r14!, {r0-r11}		// load x0-x11
-+	__strd		r10, r11, sp, 8		// store x10-x11 before state
-+	ldmia		r14, {r10-r12,r14}	// load x12-x15
-+	b		.Lnext_block\@
-+
-+.Lxor_slowpath\@:
-+	// Slow path: < 64 bytes remaining, or unaligned input or output buffer.
-+	// We handle it by storing the 64 bytes of keystream to the stack, then
-+	// XOR-ing the needed portion with the data.
-+
-+	// Allocate keystream buffer
-+	sub		sp, #64
-+	mov		r14, sp
-+
-+	// Stack: ks0-ks15 x8-x9 x12-x15 x10-x11 orig_x0-orig_x15 OUT IN LEN
-+	// Registers: r0-r7 are x0-x7; r8-r11 are free; r12 is IN; r14 is &ks0.
-+	// x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'.
-+
-+	// Save keystream for x0-x3
-+	__ldrd		r8, r9, sp, 96
-+	__ldrd		r10, r11, sp, 104
-+	add		X0, X0, r8
-+	add		X1, X1, r9
-+	add		X2, X2, r10
-+	add		X3, X3, r11
-+	_le32_bswap_4x	X0, X1, X2, X3,  r8, r9, r10
-+	stmia		r14!, {X0-X3}
-+
-+	// Save keystream for x4-x7
-+	__ldrd		r8, r9, sp, 112
-+	__ldrd		r10, r11, sp, 120
-+	add		X4, r8, X4, ror #brot
-+	add		X5, r9, X5, ror #brot
-+	add		X6, r10, X6, ror #brot
-+	add		X7, r11, X7, ror #brot
-+	_le32_bswap_4x	X4, X5, X6, X7,  r8, r9, r10
-+	  add		r8, sp, #64
-+	stmia		r14!, {X4-X7}
-+
-+	// Save keystream for x8-x15
-+	ldm		r8, {r0-r7}		// (x8-x9,x12-x15,x10-x11)
-+	__ldrd		r8, r9, sp, 128
-+	__ldrd		r10, r11, sp, 136
-+	add		r0, r0, r8		// x8
-+	add		r1, r1, r9		// x9
-+	add		r6, r6, r10		// x10
-+	add		r7, r7, r11		// x11
-+	_le32_bswap_4x	r0, r1, r6, r7,  r8, r9, r10
-+	stmia		r14!, {r0,r1,r6,r7}
-+	__ldrd		r8, r9, sp, 144
-+	__ldrd		r10, r11, sp, 152
-+	add		r2, r8, r2, ror #drot	// x12
-+	add		r3, r9, r3, ror #drot	// x13
-+	add		r4, r10, r4, ror #drot	// x14
-+	add		r5, r11, r5, ror #drot	// x15
-+	_le32_bswap_4x	r2, r3, r4, r5,  r9, r10, r11
-+	stmia		r14, {r2-r5}
-+
-+	// Stack: ks0-ks15 unused0-unused7 x0-x15 OUT IN LEN
-+	// Registers: r8 is block counter, r12 is IN.
-+
-+	ldr		r9, [sp, #168]		// LEN
-+	ldr		r14, [sp, #160]		// OUT
-+	cmp		r9, #64
-+	  mov		r0, sp
-+	movle		r1, r9
-+	movgt		r1, #64
-+	// r1 is number of bytes to XOR, in range [1, 64]
-+
-+.if __LINUX_ARM_ARCH__ < 6
-+	orr		r2, r12, r14
-+	tst		r2, #3			// IN or OUT misaligned?
-+	bne		.Lxor_next_byte\@
-+.endif
-+
-+	// XOR a word at a time
-+.rept 16
-+	subs		r1, #4
-+	blt		.Lxor_words_done\@
-+	ldr		r2, [r12], #4
-+	ldr		r3, [r0], #4
-+	eor		r2, r2, r3
-+	str		r2, [r14], #4
-+.endr
-+	b		.Lxor_slowpath_done\@
-+.Lxor_words_done\@:
-+	ands		r1, r1, #3
-+	beq		.Lxor_slowpath_done\@
-+
-+	// XOR a byte at a time
-+.Lxor_next_byte\@:
-+	ldrb		r2, [r12], #1
-+	ldrb		r3, [r0], #1
-+	eor		r2, r2, r3
-+	strb		r2, [r14], #1
-+	subs		r1, #1
-+	bne		.Lxor_next_byte\@
-+
-+.Lxor_slowpath_done\@:
-+	subs		r9, #64
-+	add		sp, #96
-+	bgt		.Lprepare_for_next_block\@
-+
-+.Ldone\@:
-+.endm	// _chacha
-+
-+/*
-+ * void chacha20_arm(u8 *out, const u8 *in, size_t len, const u32 key[8],
-+ *		     const u32 iv[4]);
-+ */
-+ENTRY(chacha20_arm)
-+	cmp		r2, #0			// len == 0?
-+	reteq		lr
-+
-+	push		{r0-r2,r4-r11,lr}
-+
-+	// Push state x0-x15 onto stack.
-+	// Also store an extra copy of x10-x11 just before the state.
-+
-+	ldr		r4, [sp, #48]		// iv
-+	mov		r0, sp
-+	sub		sp, #80
-+
-+	// iv: x12-x15
-+	ldm		r4, {X12,X13,X14,X15}
-+	stmdb		r0!, {X12,X13,X14,X15}
-+
-+	// key: x4-x11
-+	__ldrd		X8_X10, X9_X11, r3, 24
-+	__strd		X8_X10, X9_X11, sp, 8
-+	stmdb		r0!, {X8_X10, X9_X11}
-+	ldm		r3, {X4-X9_X11}
-+	stmdb		r0!, {X4-X9_X11}
-+
-+	// constants: x0-x3
-+	adrl		X3, .Lexpand_32byte_k
-+	ldm		X3, {X0-X3}
-+	__strd		X0, X1, sp, 16
-+	__strd		X2, X3, sp, 24
-+
-+	_chacha		20
-+
-+	add		sp, #76
-+	pop		{r4-r11, pc}
-+ENDPROC(chacha20_arm)
-+
-+/*
-+ * void hchacha20_arm(const u32 state[16], u32 out[8]);
-+ */
-+ENTRY(hchacha20_arm)
-+	push		{r1,r4-r11,lr}
-+
-+	mov		r14, r0
-+	ldmia		r14!, {r0-r11}		// load x0-x11
-+	push		{r10-r11}		// store x10-x11 to stack
-+	ldm		r14, {r10-r12,r14}	// load x12-x15
-+	sub		sp, #8
-+
-+	_chacha_permute	20
-+
-+	// Skip over (unused0-unused1, x10-x11)
-+	add		sp, #16
-+
-+	// Fix up rotations of x12-x15
-+	ror		X12, X12, #drot
-+	ror		X13, X13, #drot
-+	  pop		{r4}			// load 'out'
-+	ror		X14, X14, #drot
-+	ror		X15, X15, #drot
-+
-+	// Store (x0-x3,x12-x15) to 'out'
-+	stm		r4, {X0,X1,X2,X3,X12,X13,X14,X15}
-+
-+	pop		{r4-r11,pc}
-+ENDPROC(hchacha20_arm)
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0008-crypto-arm-chacha-remove-dependency-on-generic-ChaCh.patch b/target/linux/generic/backport-5.4/080-wireguard-0008-crypto-arm-chacha-remove-dependency-on-generic-ChaCh.patch
deleted file mode 100644
index 88c9738dbc..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0008-crypto-arm-chacha-remove-dependency-on-generic-ChaCh.patch
+++ /dev/null
@@ -1,691 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:14 +0100
-Subject: [PATCH] crypto: arm/chacha - remove dependency on generic ChaCha
- driver
-
-commit b36d8c09e710c71f6a9690b6586fea2d1c9e1e27 upstream.
-
-Instead of falling back to the generic ChaCha skcipher driver for
-non-SIMD cases, use a fast scalar implementation for ARM authored
-by Eric Biggers. This removes the module dependency on chacha-generic
-altogether, which also simplifies things when we expose the ChaCha
-library interface from this module.
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/Kconfig              |   4 +-
- arch/arm/crypto/Makefile             |   3 +-
- arch/arm/crypto/chacha-glue.c        | 304 +++++++++++++++++++++++++++
- arch/arm/crypto/chacha-neon-glue.c   | 202 ------------------
- arch/arm/crypto/chacha-scalar-core.S |  65 +++---
- arch/arm64/crypto/chacha-neon-glue.c |   2 +-
- 6 files changed, 340 insertions(+), 240 deletions(-)
- create mode 100644 arch/arm/crypto/chacha-glue.c
- delete mode 100644 arch/arm/crypto/chacha-neon-glue.c
-
---- a/arch/arm/crypto/Kconfig
-+++ b/arch/arm/crypto/Kconfig
-@@ -127,10 +127,8 @@ config CRYPTO_CRC32_ARM_CE
- 	select CRYPTO_HASH
- 
- config CRYPTO_CHACHA20_NEON
--	tristate "NEON accelerated ChaCha stream cipher algorithms"
--	depends on KERNEL_MODE_NEON
-+	tristate "NEON and scalar accelerated ChaCha stream cipher algorithms"
- 	select CRYPTO_BLKCIPHER
--	select CRYPTO_CHACHA20
- 
- config CRYPTO_NHPOLY1305_NEON
- 	tristate "NEON accelerated NHPoly1305 hash function (for Adiantum)"
---- a/arch/arm/crypto/Makefile
-+++ b/arch/arm/crypto/Makefile
-@@ -53,7 +53,8 @@ aes-arm-ce-y	:= aes-ce-core.o aes-ce-glu
- ghash-arm-ce-y	:= ghash-ce-core.o ghash-ce-glue.o
- crct10dif-arm-ce-y	:= crct10dif-ce-core.o crct10dif-ce-glue.o
- crc32-arm-ce-y:= crc32-ce-core.o crc32-ce-glue.o
--chacha-neon-y := chacha-neon-core.o chacha-neon-glue.o
-+chacha-neon-y := chacha-scalar-core.o chacha-glue.o
-+chacha-neon-$(CONFIG_KERNEL_MODE_NEON) += chacha-neon-core.o
- nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o
- 
- ifdef REGENERATE_ARM_CRYPTO
---- /dev/null
-+++ b/arch/arm/crypto/chacha-glue.c
-@@ -0,0 +1,304 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * ARM NEON accelerated ChaCha and XChaCha stream ciphers,
-+ * including ChaCha20 (RFC7539)
-+ *
-+ * Copyright (C) 2016-2019 Linaro, Ltd. <ard.biesheuvel@linaro.org>
-+ * Copyright (C) 2015 Martin Willi
-+ */
-+
-+#include <crypto/algapi.h>
-+#include <crypto/internal/chacha.h>
-+#include <crypto/internal/simd.h>
-+#include <crypto/internal/skcipher.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+
-+#include <asm/cputype.h>
-+#include <asm/hwcap.h>
-+#include <asm/neon.h>
-+#include <asm/simd.h>
-+
-+asmlinkage void chacha_block_xor_neon(const u32 *state, u8 *dst, const u8 *src,
-+				      int nrounds);
-+asmlinkage void chacha_4block_xor_neon(const u32 *state, u8 *dst, const u8 *src,
-+				       int nrounds);
-+asmlinkage void hchacha_block_arm(const u32 *state, u32 *out, int nrounds);
-+asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds);
-+
-+asmlinkage void chacha_doarm(u8 *dst, const u8 *src, unsigned int bytes,
-+			     const u32 *state, int nrounds);
-+
-+static inline bool neon_usable(void)
-+{
-+	return crypto_simd_usable();
-+}
-+
-+static void chacha_doneon(u32 *state, u8 *dst, const u8 *src,
-+			  unsigned int bytes, int nrounds)
-+{
-+	u8 buf[CHACHA_BLOCK_SIZE];
-+
-+	while (bytes >= CHACHA_BLOCK_SIZE * 4) {
-+		chacha_4block_xor_neon(state, dst, src, nrounds);
-+		bytes -= CHACHA_BLOCK_SIZE * 4;
-+		src += CHACHA_BLOCK_SIZE * 4;
-+		dst += CHACHA_BLOCK_SIZE * 4;
-+		state[12] += 4;
-+	}
-+	while (bytes >= CHACHA_BLOCK_SIZE) {
-+		chacha_block_xor_neon(state, dst, src, nrounds);
-+		bytes -= CHACHA_BLOCK_SIZE;
-+		src += CHACHA_BLOCK_SIZE;
-+		dst += CHACHA_BLOCK_SIZE;
-+		state[12]++;
-+	}
-+	if (bytes) {
-+		memcpy(buf, src, bytes);
-+		chacha_block_xor_neon(state, buf, buf, nrounds);
-+		memcpy(dst, buf, bytes);
-+	}
-+}
-+
-+static int chacha_stream_xor(struct skcipher_request *req,
-+			     const struct chacha_ctx *ctx, const u8 *iv,
-+			     bool neon)
-+{
-+	struct skcipher_walk walk;
-+	u32 state[16];
-+	int err;
-+
-+	err = skcipher_walk_virt(&walk, req, false);
-+
-+	chacha_init_generic(state, ctx->key, iv);
-+
-+	while (walk.nbytes > 0) {
-+		unsigned int nbytes = walk.nbytes;
-+
-+		if (nbytes < walk.total)
-+			nbytes = round_down(nbytes, walk.stride);
-+
-+		if (!neon) {
-+			chacha_doarm(walk.dst.virt.addr, walk.src.virt.addr,
-+				     nbytes, state, ctx->nrounds);
-+			state[12] += DIV_ROUND_UP(nbytes, CHACHA_BLOCK_SIZE);
-+		} else {
-+			kernel_neon_begin();
-+			chacha_doneon(state, walk.dst.virt.addr,
-+				      walk.src.virt.addr, nbytes, ctx->nrounds);
-+			kernel_neon_end();
-+		}
-+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
-+	}
-+
-+	return err;
-+}
-+
-+static int do_chacha(struct skcipher_request *req, bool neon)
-+{
-+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-+	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-+
-+	return chacha_stream_xor(req, ctx, req->iv, neon);
-+}
-+
-+static int chacha_arm(struct skcipher_request *req)
-+{
-+	return do_chacha(req, false);
-+}
-+
-+static int chacha_neon(struct skcipher_request *req)
-+{
-+	return do_chacha(req, neon_usable());
-+}
-+
-+static int do_xchacha(struct skcipher_request *req, bool neon)
-+{
-+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-+	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-+	struct chacha_ctx subctx;
-+	u32 state[16];
-+	u8 real_iv[16];
-+
-+	chacha_init_generic(state, ctx->key, req->iv);
-+
-+	if (!neon) {
-+		hchacha_block_arm(state, subctx.key, ctx->nrounds);
-+	} else {
-+		kernel_neon_begin();
-+		hchacha_block_neon(state, subctx.key, ctx->nrounds);
-+		kernel_neon_end();
-+	}
-+	subctx.nrounds = ctx->nrounds;
-+
-+	memcpy(&real_iv[0], req->iv + 24, 8);
-+	memcpy(&real_iv[8], req->iv + 16, 8);
-+	return chacha_stream_xor(req, &subctx, real_iv, neon);
-+}
-+
-+static int xchacha_arm(struct skcipher_request *req)
-+{
-+	return do_xchacha(req, false);
-+}
-+
-+static int xchacha_neon(struct skcipher_request *req)
-+{
-+	return do_xchacha(req, neon_usable());
-+}
-+
-+static struct skcipher_alg arm_algs[] = {
-+	{
-+		.base.cra_name		= "chacha20",
-+		.base.cra_driver_name	= "chacha20-arm",
-+		.base.cra_priority	= 200,
-+		.base.cra_blocksize	= 1,
-+		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-+		.base.cra_module	= THIS_MODULE,
-+
-+		.min_keysize		= CHACHA_KEY_SIZE,
-+		.max_keysize		= CHACHA_KEY_SIZE,
-+		.ivsize			= CHACHA_IV_SIZE,
-+		.chunksize		= CHACHA_BLOCK_SIZE,
-+		.setkey			= chacha20_setkey,
-+		.encrypt		= chacha_arm,
-+		.decrypt		= chacha_arm,
-+	}, {
-+		.base.cra_name		= "xchacha20",
-+		.base.cra_driver_name	= "xchacha20-arm",
-+		.base.cra_priority	= 200,
-+		.base.cra_blocksize	= 1,
-+		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-+		.base.cra_module	= THIS_MODULE,
-+
-+		.min_keysize		= CHACHA_KEY_SIZE,
-+		.max_keysize		= CHACHA_KEY_SIZE,
-+		.ivsize			= XCHACHA_IV_SIZE,
-+		.chunksize		= CHACHA_BLOCK_SIZE,
-+		.setkey			= chacha20_setkey,
-+		.encrypt		= xchacha_arm,
-+		.decrypt		= xchacha_arm,
-+	}, {
-+		.base.cra_name		= "xchacha12",
-+		.base.cra_driver_name	= "xchacha12-arm",
-+		.base.cra_priority	= 200,
-+		.base.cra_blocksize	= 1,
-+		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-+		.base.cra_module	= THIS_MODULE,
-+
-+		.min_keysize		= CHACHA_KEY_SIZE,
-+		.max_keysize		= CHACHA_KEY_SIZE,
-+		.ivsize			= XCHACHA_IV_SIZE,
-+		.chunksize		= CHACHA_BLOCK_SIZE,
-+		.setkey			= chacha12_setkey,
-+		.encrypt		= xchacha_arm,
-+		.decrypt		= xchacha_arm,
-+	},
-+};
-+
-+static struct skcipher_alg neon_algs[] = {
-+	{
-+		.base.cra_name		= "chacha20",
-+		.base.cra_driver_name	= "chacha20-neon",
-+		.base.cra_priority	= 300,
-+		.base.cra_blocksize	= 1,
-+		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-+		.base.cra_module	= THIS_MODULE,
-+
-+		.min_keysize		= CHACHA_KEY_SIZE,
-+		.max_keysize		= CHACHA_KEY_SIZE,
-+		.ivsize			= CHACHA_IV_SIZE,
-+		.chunksize		= CHACHA_BLOCK_SIZE,
-+		.walksize		= 4 * CHACHA_BLOCK_SIZE,
-+		.setkey			= chacha20_setkey,
-+		.encrypt		= chacha_neon,
-+		.decrypt		= chacha_neon,
-+	}, {
-+		.base.cra_name		= "xchacha20",
-+		.base.cra_driver_name	= "xchacha20-neon",
-+		.base.cra_priority	= 300,
-+		.base.cra_blocksize	= 1,
-+		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-+		.base.cra_module	= THIS_MODULE,
-+
-+		.min_keysize		= CHACHA_KEY_SIZE,
-+		.max_keysize		= CHACHA_KEY_SIZE,
-+		.ivsize			= XCHACHA_IV_SIZE,
-+		.chunksize		= CHACHA_BLOCK_SIZE,
-+		.walksize		= 4 * CHACHA_BLOCK_SIZE,
-+		.setkey			= chacha20_setkey,
-+		.encrypt		= xchacha_neon,
-+		.decrypt		= xchacha_neon,
-+	}, {
-+		.base.cra_name		= "xchacha12",
-+		.base.cra_driver_name	= "xchacha12-neon",
-+		.base.cra_priority	= 300,
-+		.base.cra_blocksize	= 1,
-+		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-+		.base.cra_module	= THIS_MODULE,
-+
-+		.min_keysize		= CHACHA_KEY_SIZE,
-+		.max_keysize		= CHACHA_KEY_SIZE,
-+		.ivsize			= XCHACHA_IV_SIZE,
-+		.chunksize		= CHACHA_BLOCK_SIZE,
-+		.walksize		= 4 * CHACHA_BLOCK_SIZE,
-+		.setkey			= chacha12_setkey,
-+		.encrypt		= xchacha_neon,
-+		.decrypt		= xchacha_neon,
-+	}
-+};
-+
-+static int __init chacha_simd_mod_init(void)
-+{
-+	int err;
-+
-+	err = crypto_register_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-+	if (err)
-+		return err;
-+
-+	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON)) {
-+		int i;
-+
-+		switch (read_cpuid_part()) {
-+		case ARM_CPU_PART_CORTEX_A7:
-+		case ARM_CPU_PART_CORTEX_A5:
-+			/*
-+			 * The Cortex-A7 and Cortex-A5 do not perform well with
-+			 * the NEON implementation but do incredibly with the
-+			 * scalar one and use less power.
-+			 */
-+			for (i = 0; i < ARRAY_SIZE(neon_algs); i++)
-+				neon_algs[i].base.cra_priority = 0;
-+			break;
-+		}
-+
-+		err = crypto_register_skciphers(neon_algs, ARRAY_SIZE(neon_algs));
-+		if (err)
-+			crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-+	}
-+	return err;
-+}
-+
-+static void __exit chacha_simd_mod_fini(void)
-+{
-+	crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-+	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON))
-+		crypto_unregister_skciphers(neon_algs, ARRAY_SIZE(neon_algs));
-+}
-+
-+module_init(chacha_simd_mod_init);
-+module_exit(chacha_simd_mod_fini);
-+
-+MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (scalar and NEON accelerated)");
-+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS_CRYPTO("chacha20");
-+MODULE_ALIAS_CRYPTO("chacha20-arm");
-+MODULE_ALIAS_CRYPTO("xchacha20");
-+MODULE_ALIAS_CRYPTO("xchacha20-arm");
-+MODULE_ALIAS_CRYPTO("xchacha12");
-+MODULE_ALIAS_CRYPTO("xchacha12-arm");
-+#ifdef CONFIG_KERNEL_MODE_NEON
-+MODULE_ALIAS_CRYPTO("chacha20-neon");
-+MODULE_ALIAS_CRYPTO("xchacha20-neon");
-+MODULE_ALIAS_CRYPTO("xchacha12-neon");
-+#endif
---- a/arch/arm/crypto/chacha-neon-glue.c
-+++ /dev/null
-@@ -1,202 +0,0 @@
--/*
-- * ARM NEON accelerated ChaCha and XChaCha stream ciphers,
-- * including ChaCha20 (RFC7539)
-- *
-- * Copyright (C) 2016 Linaro, Ltd. <ard.biesheuvel@linaro.org>
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- *
-- * Based on:
-- * ChaCha20 256-bit cipher algorithm, RFC7539, SIMD glue code
-- *
-- * Copyright (C) 2015 Martin Willi
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- */
--
--#include <crypto/algapi.h>
--#include <crypto/internal/chacha.h>
--#include <crypto/internal/simd.h>
--#include <crypto/internal/skcipher.h>
--#include <linux/kernel.h>
--#include <linux/module.h>
--
--#include <asm/hwcap.h>
--#include <asm/neon.h>
--#include <asm/simd.h>
--
--asmlinkage void chacha_block_xor_neon(const u32 *state, u8 *dst, const u8 *src,
--				      int nrounds);
--asmlinkage void chacha_4block_xor_neon(const u32 *state, u8 *dst, const u8 *src,
--				       int nrounds);
--asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds);
--
--static void chacha_doneon(u32 *state, u8 *dst, const u8 *src,
--			  unsigned int bytes, int nrounds)
--{
--	u8 buf[CHACHA_BLOCK_SIZE];
--
--	while (bytes >= CHACHA_BLOCK_SIZE * 4) {
--		chacha_4block_xor_neon(state, dst, src, nrounds);
--		bytes -= CHACHA_BLOCK_SIZE * 4;
--		src += CHACHA_BLOCK_SIZE * 4;
--		dst += CHACHA_BLOCK_SIZE * 4;
--		state[12] += 4;
--	}
--	while (bytes >= CHACHA_BLOCK_SIZE) {
--		chacha_block_xor_neon(state, dst, src, nrounds);
--		bytes -= CHACHA_BLOCK_SIZE;
--		src += CHACHA_BLOCK_SIZE;
--		dst += CHACHA_BLOCK_SIZE;
--		state[12]++;
--	}
--	if (bytes) {
--		memcpy(buf, src, bytes);
--		chacha_block_xor_neon(state, buf, buf, nrounds);
--		memcpy(dst, buf, bytes);
--	}
--}
--
--static int chacha_neon_stream_xor(struct skcipher_request *req,
--				  const struct chacha_ctx *ctx, const u8 *iv)
--{
--	struct skcipher_walk walk;
--	u32 state[16];
--	int err;
--
--	err = skcipher_walk_virt(&walk, req, false);
--
--	crypto_chacha_init(state, ctx, iv);
--
--	while (walk.nbytes > 0) {
--		unsigned int nbytes = walk.nbytes;
--
--		if (nbytes < walk.total)
--			nbytes = round_down(nbytes, walk.stride);
--
--		kernel_neon_begin();
--		chacha_doneon(state, walk.dst.virt.addr, walk.src.virt.addr,
--			      nbytes, ctx->nrounds);
--		kernel_neon_end();
--		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
--	}
--
--	return err;
--}
--
--static int chacha_neon(struct skcipher_request *req)
--{
--	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
--	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
--
--	if (req->cryptlen <= CHACHA_BLOCK_SIZE || !crypto_simd_usable())
--		return crypto_chacha_crypt(req);
--
--	return chacha_neon_stream_xor(req, ctx, req->iv);
--}
--
--static int xchacha_neon(struct skcipher_request *req)
--{
--	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
--	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
--	struct chacha_ctx subctx;
--	u32 state[16];
--	u8 real_iv[16];
--
--	if (req->cryptlen <= CHACHA_BLOCK_SIZE || !crypto_simd_usable())
--		return crypto_xchacha_crypt(req);
--
--	crypto_chacha_init(state, ctx, req->iv);
--
--	kernel_neon_begin();
--	hchacha_block_neon(state, subctx.key, ctx->nrounds);
--	kernel_neon_end();
--	subctx.nrounds = ctx->nrounds;
--
--	memcpy(&real_iv[0], req->iv + 24, 8);
--	memcpy(&real_iv[8], req->iv + 16, 8);
--	return chacha_neon_stream_xor(req, &subctx, real_iv);
--}
--
--static struct skcipher_alg algs[] = {
--	{
--		.base.cra_name		= "chacha20",
--		.base.cra_driver_name	= "chacha20-neon",
--		.base.cra_priority	= 300,
--		.base.cra_blocksize	= 1,
--		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
--		.base.cra_module	= THIS_MODULE,
--
--		.min_keysize		= CHACHA_KEY_SIZE,
--		.max_keysize		= CHACHA_KEY_SIZE,
--		.ivsize			= CHACHA_IV_SIZE,
--		.chunksize		= CHACHA_BLOCK_SIZE,
--		.walksize		= 4 * CHACHA_BLOCK_SIZE,
--		.setkey			= crypto_chacha20_setkey,
--		.encrypt		= chacha_neon,
--		.decrypt		= chacha_neon,
--	}, {
--		.base.cra_name		= "xchacha20",
--		.base.cra_driver_name	= "xchacha20-neon",
--		.base.cra_priority	= 300,
--		.base.cra_blocksize	= 1,
--		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
--		.base.cra_module	= THIS_MODULE,
--
--		.min_keysize		= CHACHA_KEY_SIZE,
--		.max_keysize		= CHACHA_KEY_SIZE,
--		.ivsize			= XCHACHA_IV_SIZE,
--		.chunksize		= CHACHA_BLOCK_SIZE,
--		.walksize		= 4 * CHACHA_BLOCK_SIZE,
--		.setkey			= crypto_chacha20_setkey,
--		.encrypt		= xchacha_neon,
--		.decrypt		= xchacha_neon,
--	}, {
--		.base.cra_name		= "xchacha12",
--		.base.cra_driver_name	= "xchacha12-neon",
--		.base.cra_priority	= 300,
--		.base.cra_blocksize	= 1,
--		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
--		.base.cra_module	= THIS_MODULE,
--
--		.min_keysize		= CHACHA_KEY_SIZE,
--		.max_keysize		= CHACHA_KEY_SIZE,
--		.ivsize			= XCHACHA_IV_SIZE,
--		.chunksize		= CHACHA_BLOCK_SIZE,
--		.walksize		= 4 * CHACHA_BLOCK_SIZE,
--		.setkey			= crypto_chacha12_setkey,
--		.encrypt		= xchacha_neon,
--		.decrypt		= xchacha_neon,
--	}
--};
--
--static int __init chacha_simd_mod_init(void)
--{
--	if (!(elf_hwcap & HWCAP_NEON))
--		return -ENODEV;
--
--	return crypto_register_skciphers(algs, ARRAY_SIZE(algs));
--}
--
--static void __exit chacha_simd_mod_fini(void)
--{
--	crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
--}
--
--module_init(chacha_simd_mod_init);
--module_exit(chacha_simd_mod_fini);
--
--MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (NEON accelerated)");
--MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
--MODULE_LICENSE("GPL v2");
--MODULE_ALIAS_CRYPTO("chacha20");
--MODULE_ALIAS_CRYPTO("chacha20-neon");
--MODULE_ALIAS_CRYPTO("xchacha20");
--MODULE_ALIAS_CRYPTO("xchacha20-neon");
--MODULE_ALIAS_CRYPTO("xchacha12");
--MODULE_ALIAS_CRYPTO("xchacha12-neon");
---- a/arch/arm/crypto/chacha-scalar-core.S
-+++ b/arch/arm/crypto/chacha-scalar-core.S
-@@ -41,14 +41,6 @@
- 	X14	.req	r12
- 	X15	.req	r14
- 
--.Lexpand_32byte_k:
--	// "expand 32-byte k"
--	.word	0x61707865, 0x3320646e, 0x79622d32, 0x6b206574
--
--#ifdef __thumb2__
--#  define adrl adr
--#endif
--
- .macro __rev		out, in,  t0, t1, t2
- .if __LINUX_ARM_ARCH__ >= 6
- 	rev		\out, \in
-@@ -391,61 +383,65 @@
- .endm	// _chacha
- 
- /*
-- * void chacha20_arm(u8 *out, const u8 *in, size_t len, const u32 key[8],
-- *		     const u32 iv[4]);
-+ * void chacha_doarm(u8 *dst, const u8 *src, unsigned int bytes,
-+ *		     const u32 *state, int nrounds);
-  */
--ENTRY(chacha20_arm)
-+ENTRY(chacha_doarm)
- 	cmp		r2, #0			// len == 0?
- 	reteq		lr
- 
-+	ldr		ip, [sp]
-+	cmp		ip, #12
-+
- 	push		{r0-r2,r4-r11,lr}
- 
- 	// Push state x0-x15 onto stack.
- 	// Also store an extra copy of x10-x11 just before the state.
- 
--	ldr		r4, [sp, #48]		// iv
--	mov		r0, sp
--	sub		sp, #80
--
--	// iv: x12-x15
--	ldm		r4, {X12,X13,X14,X15}
--	stmdb		r0!, {X12,X13,X14,X15}
-+	add		X12, r3, #48
-+	ldm		X12, {X12,X13,X14,X15}
-+	push		{X12,X13,X14,X15}
-+	sub		sp, sp, #64
- 
--	// key: x4-x11
--	__ldrd		X8_X10, X9_X11, r3, 24
-+	__ldrd		X8_X10, X9_X11, r3, 40
- 	__strd		X8_X10, X9_X11, sp, 8
--	stmdb		r0!, {X8_X10, X9_X11}
--	ldm		r3, {X4-X9_X11}
--	stmdb		r0!, {X4-X9_X11}
--
--	// constants: x0-x3
--	adrl		X3, .Lexpand_32byte_k
--	ldm		X3, {X0-X3}
-+	__strd		X8_X10, X9_X11, sp, 56
-+	ldm		r3, {X0-X9_X11}
- 	__strd		X0, X1, sp, 16
- 	__strd		X2, X3, sp, 24
-+	__strd		X4, X5, sp, 32
-+	__strd		X6, X7, sp, 40
-+	__strd		X8_X10, X9_X11, sp, 48
- 
-+	beq		1f
- 	_chacha		20
- 
--	add		sp, #76
-+0:	add		sp, #76
- 	pop		{r4-r11, pc}
--ENDPROC(chacha20_arm)
-+
-+1:	_chacha		12
-+	b		0b
-+ENDPROC(chacha_doarm)
- 
- /*
-- * void hchacha20_arm(const u32 state[16], u32 out[8]);
-+ * void hchacha_block_arm(const u32 state[16], u32 out[8], int nrounds);
-  */
--ENTRY(hchacha20_arm)
-+ENTRY(hchacha_block_arm)
- 	push		{r1,r4-r11,lr}
- 
-+	cmp		r2, #12			// ChaCha12 ?
-+
- 	mov		r14, r0
- 	ldmia		r14!, {r0-r11}		// load x0-x11
- 	push		{r10-r11}		// store x10-x11 to stack
- 	ldm		r14, {r10-r12,r14}	// load x12-x15
- 	sub		sp, #8
- 
-+	beq		1f
- 	_chacha_permute	20
- 
- 	// Skip over (unused0-unused1, x10-x11)
--	add		sp, #16
-+0:	add		sp, #16
- 
- 	// Fix up rotations of x12-x15
- 	ror		X12, X12, #drot
-@@ -458,4 +454,7 @@ ENTRY(hchacha20_arm)
- 	stm		r4, {X0,X1,X2,X3,X12,X13,X14,X15}
- 
- 	pop		{r4-r11,pc}
--ENDPROC(hchacha20_arm)
-+
-+1:	_chacha_permute	12
-+	b		0b
-+ENDPROC(hchacha_block_arm)
---- a/arch/arm64/crypto/chacha-neon-glue.c
-+++ b/arch/arm64/crypto/chacha-neon-glue.c
-@@ -1,5 +1,5 @@
- /*
-- * ARM NEON accelerated ChaCha and XChaCha stream ciphers,
-+ * ARM NEON and scalar accelerated ChaCha and XChaCha stream ciphers,
-  * including ChaCha20 (RFC7539)
-  *
-  * Copyright (C) 2016 - 2017 Linaro, Ltd. <ard.biesheuvel@linaro.org>
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0009-crypto-arm-chacha-expose-ARM-ChaCha-routine-as-libra.patch b/target/linux/generic/backport-5.4/080-wireguard-0009-crypto-arm-chacha-expose-ARM-ChaCha-routine-as-libra.patch
deleted file mode 100644
index 4006dc63b2..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0009-crypto-arm-chacha-expose-ARM-ChaCha-routine-as-libra.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:15 +0100
-Subject: [PATCH] crypto: arm/chacha - expose ARM ChaCha routine as library
- function
-
-commit a44a3430d71bad4ee56788a59fff099b291ea54c upstream.
-
-Expose the accelerated NEON ChaCha routine directly as a symbol
-export so that users of the ChaCha library API can use it directly.
-
-Given that calls into the library API will always go through the
-routines in this module if it is enabled, switch to static keys
-to select the optimal implementation available (which may be none
-at all, in which case we defer to the generic implementation for
-all invocations).
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/Kconfig       |  1 +
- arch/arm/crypto/chacha-glue.c | 41 ++++++++++++++++++++++++++++++++++-
- 2 files changed, 41 insertions(+), 1 deletion(-)
-
---- a/arch/arm/crypto/Kconfig
-+++ b/arch/arm/crypto/Kconfig
-@@ -129,6 +129,7 @@ config CRYPTO_CRC32_ARM_CE
- config CRYPTO_CHACHA20_NEON
- 	tristate "NEON and scalar accelerated ChaCha stream cipher algorithms"
- 	select CRYPTO_BLKCIPHER
-+	select CRYPTO_ARCH_HAVE_LIB_CHACHA
- 
- config CRYPTO_NHPOLY1305_NEON
- 	tristate "NEON accelerated NHPoly1305 hash function (for Adiantum)"
---- a/arch/arm/crypto/chacha-glue.c
-+++ b/arch/arm/crypto/chacha-glue.c
-@@ -11,6 +11,7 @@
- #include <crypto/internal/chacha.h>
- #include <crypto/internal/simd.h>
- #include <crypto/internal/skcipher.h>
-+#include <linux/jump_label.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- 
-@@ -29,9 +30,11 @@ asmlinkage void hchacha_block_neon(const
- asmlinkage void chacha_doarm(u8 *dst, const u8 *src, unsigned int bytes,
- 			     const u32 *state, int nrounds);
- 
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(use_neon);
-+
- static inline bool neon_usable(void)
- {
--	return crypto_simd_usable();
-+	return static_branch_likely(&use_neon) && crypto_simd_usable();
- }
- 
- static void chacha_doneon(u32 *state, u8 *dst, const u8 *src,
-@@ -60,6 +63,40 @@ static void chacha_doneon(u32 *state, u8
- 	}
- }
- 
-+void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds)
-+{
-+	if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon_usable()) {
-+		hchacha_block_arm(state, stream, nrounds);
-+	} else {
-+		kernel_neon_begin();
-+		hchacha_block_neon(state, stream, nrounds);
-+		kernel_neon_end();
-+	}
-+}
-+EXPORT_SYMBOL(hchacha_block_arch);
-+
-+void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv)
-+{
-+	chacha_init_generic(state, key, iv);
-+}
-+EXPORT_SYMBOL(chacha_init_arch);
-+
-+void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes,
-+		       int nrounds)
-+{
-+	if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon_usable() ||
-+	    bytes <= CHACHA_BLOCK_SIZE) {
-+		chacha_doarm(dst, src, bytes, state, nrounds);
-+		state[12] += DIV_ROUND_UP(bytes, CHACHA_BLOCK_SIZE);
-+		return;
-+	}
-+
-+	kernel_neon_begin();
-+	chacha_doneon(state, dst, src, bytes, nrounds);
-+	kernel_neon_end();
-+}
-+EXPORT_SYMBOL(chacha_crypt_arch);
-+
- static int chacha_stream_xor(struct skcipher_request *req,
- 			     const struct chacha_ctx *ctx, const u8 *iv,
- 			     bool neon)
-@@ -269,6 +306,8 @@ static int __init chacha_simd_mod_init(v
- 			for (i = 0; i < ARRAY_SIZE(neon_algs); i++)
- 				neon_algs[i].base.cra_priority = 0;
- 			break;
-+		default:
-+			static_branch_enable(&use_neon);
- 		}
- 
- 		err = crypto_register_skciphers(neon_algs, ARRAY_SIZE(neon_algs));
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0010-crypto-mips-chacha-import-32r2-ChaCha-code-from-Zinc.patch b/target/linux/generic/backport-5.4/080-wireguard-0010-crypto-mips-chacha-import-32r2-ChaCha-code-from-Zinc.patch
deleted file mode 100644
index 0a2b4c4523..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0010-crypto-mips-chacha-import-32r2-ChaCha-code-from-Zinc.patch
+++ /dev/null
@@ -1,451 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 8 Nov 2019 13:22:16 +0100
-Subject: [PATCH] crypto: mips/chacha - import 32r2 ChaCha code from Zinc
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-commit 49aa7c00eddf8d8f462b0256bd82e81762d7b0c6 upstream.
-
-This imports the accelerated MIPS 32r2 ChaCha20 implementation from the
-Zinc patch set.
-
-Co-developed-by: René van Dorst <opensource@vdorst.com>
-Signed-off-by: René van Dorst <opensource@vdorst.com>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/mips/crypto/chacha-core.S | 424 +++++++++++++++++++++++++++++++++
- 1 file changed, 424 insertions(+)
- create mode 100644 arch/mips/crypto/chacha-core.S
-
---- /dev/null
-+++ b/arch/mips/crypto/chacha-core.S
-@@ -0,0 +1,424 @@
-+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
-+/*
-+ * Copyright (C) 2016-2018 René van Dorst <opensource@vdorst.com>. All Rights Reserved.
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#define MASK_U32		0x3c
-+#define CHACHA20_BLOCK_SIZE	64
-+#define STACK_SIZE		32
-+
-+#define X0	$t0
-+#define X1	$t1
-+#define X2	$t2
-+#define X3	$t3
-+#define X4	$t4
-+#define X5	$t5
-+#define X6	$t6
-+#define X7	$t7
-+#define X8	$t8
-+#define X9	$t9
-+#define X10	$v1
-+#define X11	$s6
-+#define X12	$s5
-+#define X13	$s4
-+#define X14	$s3
-+#define X15	$s2
-+/* Use regs which are overwritten on exit for Tx so we don't leak clear data. */
-+#define T0	$s1
-+#define T1	$s0
-+#define T(n)	T ## n
-+#define X(n)	X ## n
-+
-+/* Input arguments */
-+#define STATE		$a0
-+#define OUT		$a1
-+#define IN		$a2
-+#define BYTES		$a3
-+
-+/* Output argument */
-+/* NONCE[0] is kept in a register and not in memory.
-+ * We don't want to touch original value in memory.
-+ * Must be incremented every loop iteration.
-+ */
-+#define NONCE_0		$v0
-+
-+/* SAVED_X and SAVED_CA are set in the jump table.
-+ * Use regs which are overwritten on exit else we don't leak clear data.
-+ * They are used to handling the last bytes which are not multiple of 4.
-+ */
-+#define SAVED_X		X15
-+#define SAVED_CA	$s7
-+
-+#define IS_UNALIGNED	$s7
-+
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+#define MSB 0
-+#define LSB 3
-+#define ROTx rotl
-+#define ROTR(n) rotr n, 24
-+#define	CPU_TO_LE32(n) \
-+	wsbh	n; \
-+	rotr	n, 16;
-+#else
-+#define MSB 3
-+#define LSB 0
-+#define ROTx rotr
-+#define CPU_TO_LE32(n)
-+#define ROTR(n)
-+#endif
-+
-+#define FOR_EACH_WORD(x) \
-+	x( 0); \
-+	x( 1); \
-+	x( 2); \
-+	x( 3); \
-+	x( 4); \
-+	x( 5); \
-+	x( 6); \
-+	x( 7); \
-+	x( 8); \
-+	x( 9); \
-+	x(10); \
-+	x(11); \
-+	x(12); \
-+	x(13); \
-+	x(14); \
-+	x(15);
-+
-+#define FOR_EACH_WORD_REV(x) \
-+	x(15); \
-+	x(14); \
-+	x(13); \
-+	x(12); \
-+	x(11); \
-+	x(10); \
-+	x( 9); \
-+	x( 8); \
-+	x( 7); \
-+	x( 6); \
-+	x( 5); \
-+	x( 4); \
-+	x( 3); \
-+	x( 2); \
-+	x( 1); \
-+	x( 0);
-+
-+#define PLUS_ONE_0	 1
-+#define PLUS_ONE_1	 2
-+#define PLUS_ONE_2	 3
-+#define PLUS_ONE_3	 4
-+#define PLUS_ONE_4	 5
-+#define PLUS_ONE_5	 6
-+#define PLUS_ONE_6	 7
-+#define PLUS_ONE_7	 8
-+#define PLUS_ONE_8	 9
-+#define PLUS_ONE_9	10
-+#define PLUS_ONE_10	11
-+#define PLUS_ONE_11	12
-+#define PLUS_ONE_12	13
-+#define PLUS_ONE_13	14
-+#define PLUS_ONE_14	15
-+#define PLUS_ONE_15	16
-+#define PLUS_ONE(x)	PLUS_ONE_ ## x
-+#define _CONCAT3(a,b,c)	a ## b ## c
-+#define CONCAT3(a,b,c)	_CONCAT3(a,b,c)
-+
-+#define STORE_UNALIGNED(x) \
-+CONCAT3(.Lchacha20_mips_xor_unaligned_, PLUS_ONE(x), _b: ;) \
-+	.if (x != 12); \
-+		lw	T0, (x*4)(STATE); \
-+	.endif; \
-+	lwl	T1, (x*4)+MSB ## (IN); \
-+	lwr	T1, (x*4)+LSB ## (IN); \
-+	.if (x == 12); \
-+		addu	X ## x, NONCE_0; \
-+	.else; \
-+		addu	X ## x, T0; \
-+	.endif; \
-+	CPU_TO_LE32(X ## x); \
-+	xor	X ## x, T1; \
-+	swl	X ## x, (x*4)+MSB ## (OUT); \
-+	swr	X ## x, (x*4)+LSB ## (OUT);
-+
-+#define STORE_ALIGNED(x) \
-+CONCAT3(.Lchacha20_mips_xor_aligned_, PLUS_ONE(x), _b: ;) \
-+	.if (x != 12); \
-+		lw	T0, (x*4)(STATE); \
-+	.endif; \
-+	lw	T1, (x*4) ## (IN); \
-+	.if (x == 12); \
-+		addu	X ## x, NONCE_0; \
-+	.else; \
-+		addu	X ## x, T0; \
-+	.endif; \
-+	CPU_TO_LE32(X ## x); \
-+	xor	X ## x, T1; \
-+	sw	X ## x, (x*4) ## (OUT);
-+
-+/* Jump table macro.
-+ * Used for setup and handling the last bytes, which are not multiple of 4.
-+ * X15 is free to store Xn
-+ * Every jumptable entry must be equal in size.
-+ */
-+#define JMPTBL_ALIGNED(x) \
-+.Lchacha20_mips_jmptbl_aligned_ ## x: ; \
-+	.set	noreorder; \
-+	b	.Lchacha20_mips_xor_aligned_ ## x ## _b; \
-+	.if (x == 12); \
-+		addu	SAVED_X, X ## x, NONCE_0; \
-+	.else; \
-+		addu	SAVED_X, X ## x, SAVED_CA; \
-+	.endif; \
-+	.set	reorder
-+
-+#define JMPTBL_UNALIGNED(x) \
-+.Lchacha20_mips_jmptbl_unaligned_ ## x: ; \
-+	.set	noreorder; \
-+	b	.Lchacha20_mips_xor_unaligned_ ## x ## _b; \
-+	.if (x == 12); \
-+		addu	SAVED_X, X ## x, NONCE_0; \
-+	.else; \
-+		addu	SAVED_X, X ## x, SAVED_CA; \
-+	.endif; \
-+	.set	reorder
-+
-+#define AXR(A, B, C, D,  K, L, M, N,  V, W, Y, Z,  S) \
-+	addu	X(A), X(K); \
-+	addu	X(B), X(L); \
-+	addu	X(C), X(M); \
-+	addu	X(D), X(N); \
-+	xor	X(V), X(A); \
-+	xor	X(W), X(B); \
-+	xor	X(Y), X(C); \
-+	xor	X(Z), X(D); \
-+	rotl	X(V), S;    \
-+	rotl	X(W), S;    \
-+	rotl	X(Y), S;    \
-+	rotl	X(Z), S;
-+
-+.text
-+.set	reorder
-+.set	noat
-+.globl	chacha20_mips
-+.ent	chacha20_mips
-+chacha20_mips:
-+	.frame	$sp, STACK_SIZE, $ra
-+
-+	addiu	$sp, -STACK_SIZE
-+
-+	/* Return bytes = 0. */
-+	beqz	BYTES, .Lchacha20_mips_end
-+
-+	lw	NONCE_0, 48(STATE)
-+
-+	/* Save s0-s7 */
-+	sw	$s0,  0($sp)
-+	sw	$s1,  4($sp)
-+	sw	$s2,  8($sp)
-+	sw	$s3, 12($sp)
-+	sw	$s4, 16($sp)
-+	sw	$s5, 20($sp)
-+	sw	$s6, 24($sp)
-+	sw	$s7, 28($sp)
-+
-+	/* Test IN or OUT is unaligned.
-+	 * IS_UNALIGNED = ( IN | OUT ) & 0x00000003
-+	 */
-+	or	IS_UNALIGNED, IN, OUT
-+	andi	IS_UNALIGNED, 0x3
-+
-+	/* Set number of rounds */
-+	li	$at, 20
-+
-+	b	.Lchacha20_rounds_start
-+
-+.align 4
-+.Loop_chacha20_rounds:
-+	addiu	IN,  CHACHA20_BLOCK_SIZE
-+	addiu	OUT, CHACHA20_BLOCK_SIZE
-+	addiu	NONCE_0, 1
-+
-+.Lchacha20_rounds_start:
-+	lw	X0,  0(STATE)
-+	lw	X1,  4(STATE)
-+	lw	X2,  8(STATE)
-+	lw	X3,  12(STATE)
-+
-+	lw	X4,  16(STATE)
-+	lw	X5,  20(STATE)
-+	lw	X6,  24(STATE)
-+	lw	X7,  28(STATE)
-+	lw	X8,  32(STATE)
-+	lw	X9,  36(STATE)
-+	lw	X10, 40(STATE)
-+	lw	X11, 44(STATE)
-+
-+	move	X12, NONCE_0
-+	lw	X13, 52(STATE)
-+	lw	X14, 56(STATE)
-+	lw	X15, 60(STATE)
-+
-+.Loop_chacha20_xor_rounds:
-+	addiu	$at, -2
-+	AXR( 0, 1, 2, 3,  4, 5, 6, 7, 12,13,14,15, 16);
-+	AXR( 8, 9,10,11, 12,13,14,15,  4, 5, 6, 7, 12);
-+	AXR( 0, 1, 2, 3,  4, 5, 6, 7, 12,13,14,15,  8);
-+	AXR( 8, 9,10,11, 12,13,14,15,  4, 5, 6, 7,  7);
-+	AXR( 0, 1, 2, 3,  5, 6, 7, 4, 15,12,13,14, 16);
-+	AXR(10,11, 8, 9, 15,12,13,14,  5, 6, 7, 4, 12);
-+	AXR( 0, 1, 2, 3,  5, 6, 7, 4, 15,12,13,14,  8);
-+	AXR(10,11, 8, 9, 15,12,13,14,  5, 6, 7, 4,  7);
-+	bnez	$at, .Loop_chacha20_xor_rounds
-+
-+	addiu	BYTES, -(CHACHA20_BLOCK_SIZE)
-+
-+	/* Is data src/dst unaligned? Jump */
-+	bnez	IS_UNALIGNED, .Loop_chacha20_unaligned
-+
-+	/* Set number rounds here to fill delayslot. */
-+	li	$at, 20
-+
-+	/* BYTES < 0, it has no full block. */
-+	bltz	BYTES, .Lchacha20_mips_no_full_block_aligned
-+
-+	FOR_EACH_WORD_REV(STORE_ALIGNED)
-+
-+	/* BYTES > 0? Loop again. */
-+	bgtz	BYTES, .Loop_chacha20_rounds
-+
-+	/* Place this here to fill delay slot */
-+	addiu	NONCE_0, 1
-+
-+	/* BYTES < 0? Handle last bytes */
-+	bltz	BYTES, .Lchacha20_mips_xor_bytes
-+
-+.Lchacha20_mips_xor_done:
-+	/* Restore used registers */
-+	lw	$s0,  0($sp)
-+	lw	$s1,  4($sp)
-+	lw	$s2,  8($sp)
-+	lw	$s3, 12($sp)
-+	lw	$s4, 16($sp)
-+	lw	$s5, 20($sp)
-+	lw	$s6, 24($sp)
-+	lw	$s7, 28($sp)
-+
-+	/* Write NONCE_0 back to right location in state */
-+	sw	NONCE_0, 48(STATE)
-+
-+.Lchacha20_mips_end:
-+	addiu	$sp, STACK_SIZE
-+	jr	$ra
-+
-+.Lchacha20_mips_no_full_block_aligned:
-+	/* Restore the offset on BYTES */
-+	addiu	BYTES, CHACHA20_BLOCK_SIZE
-+
-+	/* Get number of full WORDS */
-+	andi	$at, BYTES, MASK_U32
-+
-+	/* Load upper half of jump table addr */
-+	lui	T0, %hi(.Lchacha20_mips_jmptbl_aligned_0)
-+
-+	/* Calculate lower half jump table offset */
-+	ins	T0, $at, 1, 6
-+
-+	/* Add offset to STATE */
-+	addu	T1, STATE, $at
-+
-+	/* Add lower half jump table addr */
-+	addiu	T0, %lo(.Lchacha20_mips_jmptbl_aligned_0)
-+
-+	/* Read value from STATE */
-+	lw	SAVED_CA, 0(T1)
-+
-+	/* Store remaining bytecounter as negative value */
-+	subu	BYTES, $at, BYTES
-+
-+	jr	T0
-+
-+	/* Jump table */
-+	FOR_EACH_WORD(JMPTBL_ALIGNED)
-+
-+
-+.Loop_chacha20_unaligned:
-+	/* Set number rounds here to fill delayslot. */
-+	li	$at, 20
-+
-+	/* BYTES > 0, it has no full block. */
-+	bltz	BYTES, .Lchacha20_mips_no_full_block_unaligned
-+
-+	FOR_EACH_WORD_REV(STORE_UNALIGNED)
-+
-+	/* BYTES > 0? Loop again. */
-+	bgtz	BYTES, .Loop_chacha20_rounds
-+
-+	/* Write NONCE_0 back to right location in state */
-+	sw	NONCE_0, 48(STATE)
-+
-+	.set noreorder
-+	/* Fall through to byte handling */
-+	bgez	BYTES, .Lchacha20_mips_xor_done
-+.Lchacha20_mips_xor_unaligned_0_b:
-+.Lchacha20_mips_xor_aligned_0_b:
-+	/* Place this here to fill delay slot */
-+	addiu	NONCE_0, 1
-+	.set reorder
-+
-+.Lchacha20_mips_xor_bytes:
-+	addu	IN, $at
-+	addu	OUT, $at
-+	/* First byte */
-+	lbu	T1, 0(IN)
-+	addiu	$at, BYTES, 1
-+	CPU_TO_LE32(SAVED_X)
-+	ROTR(SAVED_X)
-+	xor	T1, SAVED_X
-+	sb	T1, 0(OUT)
-+	beqz	$at, .Lchacha20_mips_xor_done
-+	/* Second byte */
-+	lbu	T1, 1(IN)
-+	addiu	$at, BYTES, 2
-+	ROTx	SAVED_X, 8
-+	xor	T1, SAVED_X
-+	sb	T1, 1(OUT)
-+	beqz	$at, .Lchacha20_mips_xor_done
-+	/* Third byte */
-+	lbu	T1, 2(IN)
-+	ROTx	SAVED_X, 8
-+	xor	T1, SAVED_X
-+	sb	T1, 2(OUT)
-+	b	.Lchacha20_mips_xor_done
-+
-+.Lchacha20_mips_no_full_block_unaligned:
-+	/* Restore the offset on BYTES */
-+	addiu	BYTES, CHACHA20_BLOCK_SIZE
-+
-+	/* Get number of full WORDS */
-+	andi	$at, BYTES, MASK_U32
-+
-+	/* Load upper half of jump table addr */
-+	lui	T0, %hi(.Lchacha20_mips_jmptbl_unaligned_0)
-+
-+	/* Calculate lower half jump table offset */
-+	ins	T0, $at, 1, 6
-+
-+	/* Add offset to STATE */
-+	addu	T1, STATE, $at
-+
-+	/* Add lower half jump table addr */
-+	addiu	T0, %lo(.Lchacha20_mips_jmptbl_unaligned_0)
-+
-+	/* Read value from STATE */
-+	lw	SAVED_CA, 0(T1)
-+
-+	/* Store remaining bytecounter as negative value */
-+	subu	BYTES, $at, BYTES
-+
-+	jr	T0
-+
-+	/* Jump table */
-+	FOR_EACH_WORD(JMPTBL_UNALIGNED)
-+.end chacha20_mips
-+.set at
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0011-crypto-mips-chacha-wire-up-accelerated-32r2-code-fro.patch b/target/linux/generic/backport-5.4/080-wireguard-0011-crypto-mips-chacha-wire-up-accelerated-32r2-code-fro.patch
deleted file mode 100644
index 0d24ce29e5..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0011-crypto-mips-chacha-wire-up-accelerated-32r2-code-fro.patch
+++ /dev/null
@@ -1,559 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:17 +0100
-Subject: [PATCH] crypto: mips/chacha - wire up accelerated 32r2 code from Zinc
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-commit 3a2f58f3ba4f6f44e33d1a48240d5eadb882cb59 upstream.
-
-This integrates the accelerated MIPS 32r2 implementation of ChaCha
-into both the API and library interfaces of the kernel crypto stack.
-
-The significance of this is that, in addition to becoming available
-as an accelerated library implementation, it can also be used by
-existing crypto API code such as Adiantum (for block encryption on
-ultra low performance cores) or IPsec using chacha20poly1305. These
-are use cases that have already opted into using the abstract crypto
-API. In order to support Adiantum, the core assembler routine has
-been adapted to take the round count as a function argument rather
-than hardcoding it to 20.
-
-Co-developed-by: René van Dorst <opensource@vdorst.com>
-Signed-off-by: René van Dorst <opensource@vdorst.com>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/mips/Makefile             |   2 +-
- arch/mips/crypto/Makefile      |   4 +
- arch/mips/crypto/chacha-core.S | 159 ++++++++++++++++++++++++---------
- arch/mips/crypto/chacha-glue.c | 150 +++++++++++++++++++++++++++++++
- crypto/Kconfig                 |   6 ++
- 5 files changed, 277 insertions(+), 44 deletions(-)
- create mode 100644 arch/mips/crypto/chacha-glue.c
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -334,7 +334,7 @@ libs-$(CONFIG_MIPS_FP_SUPPORT) += arch/m
- # See arch/mips/Kbuild for content of core part of the kernel
- core-y += arch/mips/
- 
--drivers-$(CONFIG_MIPS_CRC_SUPPORT) += arch/mips/crypto/
-+drivers-y			+= arch/mips/crypto/
- drivers-$(CONFIG_OPROFILE)	+= arch/mips/oprofile/
- 
- # suspend and hibernation support
---- a/arch/mips/crypto/Makefile
-+++ b/arch/mips/crypto/Makefile
-@@ -4,3 +4,7 @@
- #
- 
- obj-$(CONFIG_CRYPTO_CRC32_MIPS) += crc32-mips.o
-+
-+obj-$(CONFIG_CRYPTO_CHACHA_MIPS) += chacha-mips.o
-+chacha-mips-y := chacha-core.o chacha-glue.o
-+AFLAGS_chacha-core.o += -O2 # needed to fill branch delay slots
---- a/arch/mips/crypto/chacha-core.S
-+++ b/arch/mips/crypto/chacha-core.S
-@@ -125,7 +125,7 @@
- #define CONCAT3(a,b,c)	_CONCAT3(a,b,c)
- 
- #define STORE_UNALIGNED(x) \
--CONCAT3(.Lchacha20_mips_xor_unaligned_, PLUS_ONE(x), _b: ;) \
-+CONCAT3(.Lchacha_mips_xor_unaligned_, PLUS_ONE(x), _b: ;) \
- 	.if (x != 12); \
- 		lw	T0, (x*4)(STATE); \
- 	.endif; \
-@@ -142,7 +142,7 @@ CONCAT3(.Lchacha20_mips_xor_unaligned_,
- 	swr	X ## x, (x*4)+LSB ## (OUT);
- 
- #define STORE_ALIGNED(x) \
--CONCAT3(.Lchacha20_mips_xor_aligned_, PLUS_ONE(x), _b: ;) \
-+CONCAT3(.Lchacha_mips_xor_aligned_, PLUS_ONE(x), _b: ;) \
- 	.if (x != 12); \
- 		lw	T0, (x*4)(STATE); \
- 	.endif; \
-@@ -162,9 +162,9 @@ CONCAT3(.Lchacha20_mips_xor_aligned_, PL
-  * Every jumptable entry must be equal in size.
-  */
- #define JMPTBL_ALIGNED(x) \
--.Lchacha20_mips_jmptbl_aligned_ ## x: ; \
-+.Lchacha_mips_jmptbl_aligned_ ## x: ; \
- 	.set	noreorder; \
--	b	.Lchacha20_mips_xor_aligned_ ## x ## _b; \
-+	b	.Lchacha_mips_xor_aligned_ ## x ## _b; \
- 	.if (x == 12); \
- 		addu	SAVED_X, X ## x, NONCE_0; \
- 	.else; \
-@@ -173,9 +173,9 @@ CONCAT3(.Lchacha20_mips_xor_aligned_, PL
- 	.set	reorder
- 
- #define JMPTBL_UNALIGNED(x) \
--.Lchacha20_mips_jmptbl_unaligned_ ## x: ; \
-+.Lchacha_mips_jmptbl_unaligned_ ## x: ; \
- 	.set	noreorder; \
--	b	.Lchacha20_mips_xor_unaligned_ ## x ## _b; \
-+	b	.Lchacha_mips_xor_unaligned_ ## x ## _b; \
- 	.if (x == 12); \
- 		addu	SAVED_X, X ## x, NONCE_0; \
- 	.else; \
-@@ -200,15 +200,18 @@ CONCAT3(.Lchacha20_mips_xor_aligned_, PL
- .text
- .set	reorder
- .set	noat
--.globl	chacha20_mips
--.ent	chacha20_mips
--chacha20_mips:
-+.globl	chacha_crypt_arch
-+.ent	chacha_crypt_arch
-+chacha_crypt_arch:
- 	.frame	$sp, STACK_SIZE, $ra
- 
-+	/* Load number of rounds */
-+	lw	$at, 16($sp)
-+
- 	addiu	$sp, -STACK_SIZE
- 
- 	/* Return bytes = 0. */
--	beqz	BYTES, .Lchacha20_mips_end
-+	beqz	BYTES, .Lchacha_mips_end
- 
- 	lw	NONCE_0, 48(STATE)
- 
-@@ -228,18 +231,15 @@ chacha20_mips:
- 	or	IS_UNALIGNED, IN, OUT
- 	andi	IS_UNALIGNED, 0x3
- 
--	/* Set number of rounds */
--	li	$at, 20
--
--	b	.Lchacha20_rounds_start
-+	b	.Lchacha_rounds_start
- 
- .align 4
--.Loop_chacha20_rounds:
-+.Loop_chacha_rounds:
- 	addiu	IN,  CHACHA20_BLOCK_SIZE
- 	addiu	OUT, CHACHA20_BLOCK_SIZE
- 	addiu	NONCE_0, 1
- 
--.Lchacha20_rounds_start:
-+.Lchacha_rounds_start:
- 	lw	X0,  0(STATE)
- 	lw	X1,  4(STATE)
- 	lw	X2,  8(STATE)
-@@ -259,7 +259,7 @@ chacha20_mips:
- 	lw	X14, 56(STATE)
- 	lw	X15, 60(STATE)
- 
--.Loop_chacha20_xor_rounds:
-+.Loop_chacha_xor_rounds:
- 	addiu	$at, -2
- 	AXR( 0, 1, 2, 3,  4, 5, 6, 7, 12,13,14,15, 16);
- 	AXR( 8, 9,10,11, 12,13,14,15,  4, 5, 6, 7, 12);
-@@ -269,31 +269,31 @@ chacha20_mips:
- 	AXR(10,11, 8, 9, 15,12,13,14,  5, 6, 7, 4, 12);
- 	AXR( 0, 1, 2, 3,  5, 6, 7, 4, 15,12,13,14,  8);
- 	AXR(10,11, 8, 9, 15,12,13,14,  5, 6, 7, 4,  7);
--	bnez	$at, .Loop_chacha20_xor_rounds
-+	bnez	$at, .Loop_chacha_xor_rounds
- 
- 	addiu	BYTES, -(CHACHA20_BLOCK_SIZE)
- 
- 	/* Is data src/dst unaligned? Jump */
--	bnez	IS_UNALIGNED, .Loop_chacha20_unaligned
-+	bnez	IS_UNALIGNED, .Loop_chacha_unaligned
- 
- 	/* Set number rounds here to fill delayslot. */
--	li	$at, 20
-+	lw	$at, (STACK_SIZE+16)($sp)
- 
- 	/* BYTES < 0, it has no full block. */
--	bltz	BYTES, .Lchacha20_mips_no_full_block_aligned
-+	bltz	BYTES, .Lchacha_mips_no_full_block_aligned
- 
- 	FOR_EACH_WORD_REV(STORE_ALIGNED)
- 
- 	/* BYTES > 0? Loop again. */
--	bgtz	BYTES, .Loop_chacha20_rounds
-+	bgtz	BYTES, .Loop_chacha_rounds
- 
- 	/* Place this here to fill delay slot */
- 	addiu	NONCE_0, 1
- 
- 	/* BYTES < 0? Handle last bytes */
--	bltz	BYTES, .Lchacha20_mips_xor_bytes
-+	bltz	BYTES, .Lchacha_mips_xor_bytes
- 
--.Lchacha20_mips_xor_done:
-+.Lchacha_mips_xor_done:
- 	/* Restore used registers */
- 	lw	$s0,  0($sp)
- 	lw	$s1,  4($sp)
-@@ -307,11 +307,11 @@ chacha20_mips:
- 	/* Write NONCE_0 back to right location in state */
- 	sw	NONCE_0, 48(STATE)
- 
--.Lchacha20_mips_end:
-+.Lchacha_mips_end:
- 	addiu	$sp, STACK_SIZE
- 	jr	$ra
- 
--.Lchacha20_mips_no_full_block_aligned:
-+.Lchacha_mips_no_full_block_aligned:
- 	/* Restore the offset on BYTES */
- 	addiu	BYTES, CHACHA20_BLOCK_SIZE
- 
-@@ -319,7 +319,7 @@ chacha20_mips:
- 	andi	$at, BYTES, MASK_U32
- 
- 	/* Load upper half of jump table addr */
--	lui	T0, %hi(.Lchacha20_mips_jmptbl_aligned_0)
-+	lui	T0, %hi(.Lchacha_mips_jmptbl_aligned_0)
- 
- 	/* Calculate lower half jump table offset */
- 	ins	T0, $at, 1, 6
-@@ -328,7 +328,7 @@ chacha20_mips:
- 	addu	T1, STATE, $at
- 
- 	/* Add lower half jump table addr */
--	addiu	T0, %lo(.Lchacha20_mips_jmptbl_aligned_0)
-+	addiu	T0, %lo(.Lchacha_mips_jmptbl_aligned_0)
- 
- 	/* Read value from STATE */
- 	lw	SAVED_CA, 0(T1)
-@@ -342,31 +342,31 @@ chacha20_mips:
- 	FOR_EACH_WORD(JMPTBL_ALIGNED)
- 
- 
--.Loop_chacha20_unaligned:
-+.Loop_chacha_unaligned:
- 	/* Set number rounds here to fill delayslot. */
--	li	$at, 20
-+	lw	$at, (STACK_SIZE+16)($sp)
- 
- 	/* BYTES > 0, it has no full block. */
--	bltz	BYTES, .Lchacha20_mips_no_full_block_unaligned
-+	bltz	BYTES, .Lchacha_mips_no_full_block_unaligned
- 
- 	FOR_EACH_WORD_REV(STORE_UNALIGNED)
- 
- 	/* BYTES > 0? Loop again. */
--	bgtz	BYTES, .Loop_chacha20_rounds
-+	bgtz	BYTES, .Loop_chacha_rounds
- 
- 	/* Write NONCE_0 back to right location in state */
- 	sw	NONCE_0, 48(STATE)
- 
- 	.set noreorder
- 	/* Fall through to byte handling */
--	bgez	BYTES, .Lchacha20_mips_xor_done
--.Lchacha20_mips_xor_unaligned_0_b:
--.Lchacha20_mips_xor_aligned_0_b:
-+	bgez	BYTES, .Lchacha_mips_xor_done
-+.Lchacha_mips_xor_unaligned_0_b:
-+.Lchacha_mips_xor_aligned_0_b:
- 	/* Place this here to fill delay slot */
- 	addiu	NONCE_0, 1
- 	.set reorder
- 
--.Lchacha20_mips_xor_bytes:
-+.Lchacha_mips_xor_bytes:
- 	addu	IN, $at
- 	addu	OUT, $at
- 	/* First byte */
-@@ -376,22 +376,22 @@ chacha20_mips:
- 	ROTR(SAVED_X)
- 	xor	T1, SAVED_X
- 	sb	T1, 0(OUT)
--	beqz	$at, .Lchacha20_mips_xor_done
-+	beqz	$at, .Lchacha_mips_xor_done
- 	/* Second byte */
- 	lbu	T1, 1(IN)
- 	addiu	$at, BYTES, 2
- 	ROTx	SAVED_X, 8
- 	xor	T1, SAVED_X
- 	sb	T1, 1(OUT)
--	beqz	$at, .Lchacha20_mips_xor_done
-+	beqz	$at, .Lchacha_mips_xor_done
- 	/* Third byte */
- 	lbu	T1, 2(IN)
- 	ROTx	SAVED_X, 8
- 	xor	T1, SAVED_X
- 	sb	T1, 2(OUT)
--	b	.Lchacha20_mips_xor_done
-+	b	.Lchacha_mips_xor_done
- 
--.Lchacha20_mips_no_full_block_unaligned:
-+.Lchacha_mips_no_full_block_unaligned:
- 	/* Restore the offset on BYTES */
- 	addiu	BYTES, CHACHA20_BLOCK_SIZE
- 
-@@ -399,7 +399,7 @@ chacha20_mips:
- 	andi	$at, BYTES, MASK_U32
- 
- 	/* Load upper half of jump table addr */
--	lui	T0, %hi(.Lchacha20_mips_jmptbl_unaligned_0)
-+	lui	T0, %hi(.Lchacha_mips_jmptbl_unaligned_0)
- 
- 	/* Calculate lower half jump table offset */
- 	ins	T0, $at, 1, 6
-@@ -408,7 +408,7 @@ chacha20_mips:
- 	addu	T1, STATE, $at
- 
- 	/* Add lower half jump table addr */
--	addiu	T0, %lo(.Lchacha20_mips_jmptbl_unaligned_0)
-+	addiu	T0, %lo(.Lchacha_mips_jmptbl_unaligned_0)
- 
- 	/* Read value from STATE */
- 	lw	SAVED_CA, 0(T1)
-@@ -420,5 +420,78 @@ chacha20_mips:
- 
- 	/* Jump table */
- 	FOR_EACH_WORD(JMPTBL_UNALIGNED)
--.end chacha20_mips
-+.end chacha_crypt_arch
-+.set at
-+
-+/* Input arguments
-+ * STATE	$a0
-+ * OUT		$a1
-+ * NROUND	$a2
-+ */
-+
-+#undef X12
-+#undef X13
-+#undef X14
-+#undef X15
-+
-+#define X12	$a3
-+#define X13	$at
-+#define X14	$v0
-+#define X15	STATE
-+
-+.set noat
-+.globl	hchacha_block_arch
-+.ent	hchacha_block_arch
-+hchacha_block_arch:
-+	.frame	$sp, STACK_SIZE, $ra
-+
-+	addiu	$sp, -STACK_SIZE
-+
-+	/* Save X11(s6) */
-+	sw	X11, 0($sp)
-+
-+	lw	X0,  0(STATE)
-+	lw	X1,  4(STATE)
-+	lw	X2,  8(STATE)
-+	lw	X3,  12(STATE)
-+	lw	X4,  16(STATE)
-+	lw	X5,  20(STATE)
-+	lw	X6,  24(STATE)
-+	lw	X7,  28(STATE)
-+	lw	X8,  32(STATE)
-+	lw	X9,  36(STATE)
-+	lw	X10, 40(STATE)
-+	lw	X11, 44(STATE)
-+	lw	X12, 48(STATE)
-+	lw	X13, 52(STATE)
-+	lw	X14, 56(STATE)
-+	lw	X15, 60(STATE)
-+
-+.Loop_hchacha_xor_rounds:
-+	addiu	$a2, -2
-+	AXR( 0, 1, 2, 3,  4, 5, 6, 7, 12,13,14,15, 16);
-+	AXR( 8, 9,10,11, 12,13,14,15,  4, 5, 6, 7, 12);
-+	AXR( 0, 1, 2, 3,  4, 5, 6, 7, 12,13,14,15,  8);
-+	AXR( 8, 9,10,11, 12,13,14,15,  4, 5, 6, 7,  7);
-+	AXR( 0, 1, 2, 3,  5, 6, 7, 4, 15,12,13,14, 16);
-+	AXR(10,11, 8, 9, 15,12,13,14,  5, 6, 7, 4, 12);
-+	AXR( 0, 1, 2, 3,  5, 6, 7, 4, 15,12,13,14,  8);
-+	AXR(10,11, 8, 9, 15,12,13,14,  5, 6, 7, 4,  7);
-+	bnez	$a2, .Loop_hchacha_xor_rounds
-+
-+	/* Restore used register */
-+	lw	X11, 0($sp)
-+
-+	sw	X0,  0(OUT)
-+	sw	X1,  4(OUT)
-+	sw	X2,  8(OUT)
-+	sw	X3,  12(OUT)
-+	sw	X12, 16(OUT)
-+	sw	X13, 20(OUT)
-+	sw	X14, 24(OUT)
-+	sw	X15, 28(OUT)
-+
-+	addiu	$sp, STACK_SIZE
-+	jr	$ra
-+.end hchacha_block_arch
- .set at
---- /dev/null
-+++ b/arch/mips/crypto/chacha-glue.c
-@@ -0,0 +1,150 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * MIPS accelerated ChaCha and XChaCha stream ciphers,
-+ * including ChaCha20 (RFC7539)
-+ *
-+ * Copyright (C) 2019 Linaro, Ltd. <ard.biesheuvel@linaro.org>
-+ */
-+
-+#include <asm/byteorder.h>
-+#include <crypto/algapi.h>
-+#include <crypto/internal/chacha.h>
-+#include <crypto/internal/skcipher.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+
-+asmlinkage void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src,
-+				  unsigned int bytes, int nrounds);
-+EXPORT_SYMBOL(chacha_crypt_arch);
-+
-+asmlinkage void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds);
-+EXPORT_SYMBOL(hchacha_block_arch);
-+
-+void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv)
-+{
-+	chacha_init_generic(state, key, iv);
-+}
-+EXPORT_SYMBOL(chacha_init_arch);
-+
-+static int chacha_mips_stream_xor(struct skcipher_request *req,
-+				  const struct chacha_ctx *ctx, const u8 *iv)
-+{
-+	struct skcipher_walk walk;
-+	u32 state[16];
-+	int err;
-+
-+	err = skcipher_walk_virt(&walk, req, false);
-+
-+	chacha_init_generic(state, ctx->key, iv);
-+
-+	while (walk.nbytes > 0) {
-+		unsigned int nbytes = walk.nbytes;
-+
-+		if (nbytes < walk.total)
-+			nbytes = round_down(nbytes, walk.stride);
-+
-+		chacha_crypt(state, walk.dst.virt.addr, walk.src.virt.addr,
-+			     nbytes, ctx->nrounds);
-+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
-+	}
-+
-+	return err;
-+}
-+
-+static int chacha_mips(struct skcipher_request *req)
-+{
-+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-+	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-+
-+	return chacha_mips_stream_xor(req, ctx, req->iv);
-+}
-+
-+static int xchacha_mips(struct skcipher_request *req)
-+{
-+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-+	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-+	struct chacha_ctx subctx;
-+	u32 state[16];
-+	u8 real_iv[16];
-+
-+	chacha_init_generic(state, ctx->key, req->iv);
-+
-+	hchacha_block(state, subctx.key, ctx->nrounds);
-+	subctx.nrounds = ctx->nrounds;
-+
-+	memcpy(&real_iv[0], req->iv + 24, 8);
-+	memcpy(&real_iv[8], req->iv + 16, 8);
-+	return chacha_mips_stream_xor(req, &subctx, real_iv);
-+}
-+
-+static struct skcipher_alg algs[] = {
-+	{
-+		.base.cra_name		= "chacha20",
-+		.base.cra_driver_name	= "chacha20-mips",
-+		.base.cra_priority	= 200,
-+		.base.cra_blocksize	= 1,
-+		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-+		.base.cra_module	= THIS_MODULE,
-+
-+		.min_keysize		= CHACHA_KEY_SIZE,
-+		.max_keysize		= CHACHA_KEY_SIZE,
-+		.ivsize			= CHACHA_IV_SIZE,
-+		.chunksize		= CHACHA_BLOCK_SIZE,
-+		.setkey			= chacha20_setkey,
-+		.encrypt		= chacha_mips,
-+		.decrypt		= chacha_mips,
-+	}, {
-+		.base.cra_name		= "xchacha20",
-+		.base.cra_driver_name	= "xchacha20-mips",
-+		.base.cra_priority	= 200,
-+		.base.cra_blocksize	= 1,
-+		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-+		.base.cra_module	= THIS_MODULE,
-+
-+		.min_keysize		= CHACHA_KEY_SIZE,
-+		.max_keysize		= CHACHA_KEY_SIZE,
-+		.ivsize			= XCHACHA_IV_SIZE,
-+		.chunksize		= CHACHA_BLOCK_SIZE,
-+		.setkey			= chacha20_setkey,
-+		.encrypt		= xchacha_mips,
-+		.decrypt		= xchacha_mips,
-+	}, {
-+		.base.cra_name		= "xchacha12",
-+		.base.cra_driver_name	= "xchacha12-mips",
-+		.base.cra_priority	= 200,
-+		.base.cra_blocksize	= 1,
-+		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-+		.base.cra_module	= THIS_MODULE,
-+
-+		.min_keysize		= CHACHA_KEY_SIZE,
-+		.max_keysize		= CHACHA_KEY_SIZE,
-+		.ivsize			= XCHACHA_IV_SIZE,
-+		.chunksize		= CHACHA_BLOCK_SIZE,
-+		.setkey			= chacha12_setkey,
-+		.encrypt		= xchacha_mips,
-+		.decrypt		= xchacha_mips,
-+	}
-+};
-+
-+static int __init chacha_simd_mod_init(void)
-+{
-+	return crypto_register_skciphers(algs, ARRAY_SIZE(algs));
-+}
-+
-+static void __exit chacha_simd_mod_fini(void)
-+{
-+	crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
-+}
-+
-+module_init(chacha_simd_mod_init);
-+module_exit(chacha_simd_mod_fini);
-+
-+MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (MIPS accelerated)");
-+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS_CRYPTO("chacha20");
-+MODULE_ALIAS_CRYPTO("chacha20-mips");
-+MODULE_ALIAS_CRYPTO("xchacha20");
-+MODULE_ALIAS_CRYPTO("xchacha20-mips");
-+MODULE_ALIAS_CRYPTO("xchacha12");
-+MODULE_ALIAS_CRYPTO("xchacha12-mips");
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -1423,6 +1423,12 @@ config CRYPTO_CHACHA20_X86_64
- 	  SSSE3, AVX2, and AVX-512VL optimized implementations of the ChaCha20,
- 	  XChaCha20, and XChaCha12 stream ciphers.
- 
-+config CRYPTO_CHACHA_MIPS
-+	tristate "ChaCha stream cipher algorithms (MIPS 32r2 optimized)"
-+	depends on CPU_MIPS32_R2
-+	select CRYPTO_BLKCIPHER
-+	select CRYPTO_ARCH_HAVE_LIB_CHACHA
-+
- config CRYPTO_SEED
- 	tristate "SEED cipher algorithm"
- 	select CRYPTO_ALGAPI
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0012-crypto-chacha-unexport-chacha_generic-routines.patch b/target/linux/generic/backport-5.4/080-wireguard-0012-crypto-chacha-unexport-chacha_generic-routines.patch
deleted file mode 100644
index d06f47a100..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0012-crypto-chacha-unexport-chacha_generic-routines.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:18 +0100
-Subject: [PATCH] crypto: chacha - unexport chacha_generic routines
-
-commit 22cf705360707ced15f9fe5423938f313c7df536 upstream.
-
-Now that all users of generic ChaCha code have moved to the core library,
-there is no longer a need for the generic ChaCha skcpiher driver to
-export parts of it implementation for reuse by other drivers. So drop
-the exports, and make the symbols static.
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- crypto/chacha_generic.c          | 26 ++++++++------------------
- include/crypto/internal/chacha.h | 10 ----------
- 2 files changed, 8 insertions(+), 28 deletions(-)
-
---- a/crypto/chacha_generic.c
-+++ b/crypto/chacha_generic.c
-@@ -21,7 +21,7 @@ static int chacha_stream_xor(struct skci
- 
- 	err = skcipher_walk_virt(&walk, req, false);
- 
--	crypto_chacha_init(state, ctx, iv);
-+	chacha_init_generic(state, ctx->key, iv);
- 
- 	while (walk.nbytes > 0) {
- 		unsigned int nbytes = walk.nbytes;
-@@ -37,36 +37,27 @@ static int chacha_stream_xor(struct skci
- 	return err;
- }
- 
--void crypto_chacha_init(u32 *state, const struct chacha_ctx *ctx, const u8 *iv)
--{
--	chacha_init_generic(state, ctx->key, iv);
--}
--EXPORT_SYMBOL_GPL(crypto_chacha_init);
--
--int crypto_chacha20_setkey(struct crypto_skcipher *tfm, const u8 *key,
--			   unsigned int keysize)
-+static int crypto_chacha20_setkey(struct crypto_skcipher *tfm, const u8 *key,
-+				  unsigned int keysize)
- {
- 	return chacha_setkey(tfm, key, keysize, 20);
- }
--EXPORT_SYMBOL_GPL(crypto_chacha20_setkey);
- 
--int crypto_chacha12_setkey(struct crypto_skcipher *tfm, const u8 *key,
--			   unsigned int keysize)
-+static int crypto_chacha12_setkey(struct crypto_skcipher *tfm, const u8 *key,
-+				 unsigned int keysize)
- {
- 	return chacha_setkey(tfm, key, keysize, 12);
- }
--EXPORT_SYMBOL_GPL(crypto_chacha12_setkey);
- 
--int crypto_chacha_crypt(struct skcipher_request *req)
-+static int crypto_chacha_crypt(struct skcipher_request *req)
- {
- 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
- 	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
- 
- 	return chacha_stream_xor(req, ctx, req->iv);
- }
--EXPORT_SYMBOL_GPL(crypto_chacha_crypt);
- 
--int crypto_xchacha_crypt(struct skcipher_request *req)
-+static int crypto_xchacha_crypt(struct skcipher_request *req)
- {
- 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
- 	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-@@ -75,7 +66,7 @@ int crypto_xchacha_crypt(struct skcipher
- 	u8 real_iv[16];
- 
- 	/* Compute the subkey given the original key and first 128 nonce bits */
--	crypto_chacha_init(state, ctx, req->iv);
-+	chacha_init_generic(state, ctx->key, req->iv);
- 	hchacha_block_generic(state, subctx.key, ctx->nrounds);
- 	subctx.nrounds = ctx->nrounds;
- 
-@@ -86,7 +77,6 @@ int crypto_xchacha_crypt(struct skcipher
- 	/* Generate the stream and XOR it with the data */
- 	return chacha_stream_xor(req, &subctx, real_iv);
- }
--EXPORT_SYMBOL_GPL(crypto_xchacha_crypt);
- 
- static struct skcipher_alg algs[] = {
- 	{
---- a/include/crypto/internal/chacha.h
-+++ b/include/crypto/internal/chacha.h
-@@ -12,8 +12,6 @@ struct chacha_ctx {
- 	int nrounds;
- };
- 
--void crypto_chacha_init(u32 *state, const struct chacha_ctx *ctx, const u8 *iv);
--
- static inline int chacha_setkey(struct crypto_skcipher *tfm, const u8 *key,
- 				unsigned int keysize, int nrounds)
- {
-@@ -42,12 +40,4 @@ static int inline chacha12_setkey(struct
- 	return chacha_setkey(tfm, key, keysize, 12);
- }
- 
--int crypto_chacha20_setkey(struct crypto_skcipher *tfm, const u8 *key,
--			   unsigned int keysize);
--int crypto_chacha12_setkey(struct crypto_skcipher *tfm, const u8 *key,
--			   unsigned int keysize);
--
--int crypto_chacha_crypt(struct skcipher_request *req);
--int crypto_xchacha_crypt(struct skcipher_request *req);
--
- #endif /* _CRYPTO_CHACHA_H */
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0013-crypto-poly1305-move-core-routines-into-a-separate-l.patch b/target/linux/generic/backport-5.4/080-wireguard-0013-crypto-poly1305-move-core-routines-into-a-separate-l.patch
deleted file mode 100644
index 960300d2a5..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0013-crypto-poly1305-move-core-routines-into-a-separate-l.patch
+++ /dev/null
@@ -1,649 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:19 +0100
-Subject: [PATCH] crypto: poly1305 - move core routines into a separate library
-
-commit 48ea8c6ebc96bc0990e12ee1c43d0832c23576bb upstream.
-
-Move the core Poly1305 routines shared between the generic Poly1305
-shash driver and the Adiantum and NHPoly1305 drivers into a separate
-library so that using just this pieces does not pull in the crypto
-API pieces of the generic Poly1305 routine.
-
-In a subsequent patch, we will augment this generic library with
-init/update/final routines so that Poyl1305 algorithm can be used
-directly without the need for using the crypto API's shash abstraction.
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/poly1305_glue.c    |   2 +-
- crypto/Kconfig                     |   5 +-
- crypto/adiantum.c                  |   5 +-
- crypto/nhpoly1305.c                |   3 +-
- crypto/poly1305_generic.c          | 195 ++---------------------------
- include/crypto/internal/poly1305.h |  67 ++++++++++
- include/crypto/poly1305.h          |  23 ----
- lib/crypto/Kconfig                 |   3 +
- lib/crypto/Makefile                |   3 +
- lib/crypto/poly1305.c              | 158 +++++++++++++++++++++++
- 10 files changed, 248 insertions(+), 216 deletions(-)
- create mode 100644 include/crypto/internal/poly1305.h
- create mode 100644 lib/crypto/poly1305.c
-
---- a/arch/x86/crypto/poly1305_glue.c
-+++ b/arch/x86/crypto/poly1305_glue.c
-@@ -7,8 +7,8 @@
- 
- #include <crypto/algapi.h>
- #include <crypto/internal/hash.h>
-+#include <crypto/internal/poly1305.h>
- #include <crypto/internal/simd.h>
--#include <crypto/poly1305.h>
- #include <linux/crypto.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -446,7 +446,7 @@ config CRYPTO_KEYWRAP
- config CRYPTO_NHPOLY1305
- 	tristate
- 	select CRYPTO_HASH
--	select CRYPTO_POLY1305
-+	select CRYPTO_LIB_POLY1305_GENERIC
- 
- config CRYPTO_NHPOLY1305_SSE2
- 	tristate "NHPoly1305 hash function (x86_64 SSE2 implementation)"
-@@ -467,7 +467,7 @@ config CRYPTO_NHPOLY1305_AVX2
- config CRYPTO_ADIANTUM
- 	tristate "Adiantum support"
- 	select CRYPTO_CHACHA20
--	select CRYPTO_POLY1305
-+	select CRYPTO_LIB_POLY1305_GENERIC
- 	select CRYPTO_NHPOLY1305
- 	select CRYPTO_MANAGER
- 	help
-@@ -686,6 +686,7 @@ config CRYPTO_GHASH
- config CRYPTO_POLY1305
- 	tristate "Poly1305 authenticator algorithm"
- 	select CRYPTO_HASH
-+	select CRYPTO_LIB_POLY1305_GENERIC
- 	help
- 	  Poly1305 authenticator algorithm, RFC7539.
- 
---- a/crypto/adiantum.c
-+++ b/crypto/adiantum.c
-@@ -33,6 +33,7 @@
- #include <crypto/b128ops.h>
- #include <crypto/chacha.h>
- #include <crypto/internal/hash.h>
-+#include <crypto/internal/poly1305.h>
- #include <crypto/internal/skcipher.h>
- #include <crypto/nhpoly1305.h>
- #include <crypto/scatterwalk.h>
-@@ -242,11 +243,11 @@ static void adiantum_hash_header(struct
- 
- 	BUILD_BUG_ON(sizeof(header) % POLY1305_BLOCK_SIZE != 0);
- 	poly1305_core_blocks(&state, &tctx->header_hash_key,
--			     &header, sizeof(header) / POLY1305_BLOCK_SIZE);
-+			     &header, sizeof(header) / POLY1305_BLOCK_SIZE, 1);
- 
- 	BUILD_BUG_ON(TWEAK_SIZE % POLY1305_BLOCK_SIZE != 0);
- 	poly1305_core_blocks(&state, &tctx->header_hash_key, req->iv,
--			     TWEAK_SIZE / POLY1305_BLOCK_SIZE);
-+			     TWEAK_SIZE / POLY1305_BLOCK_SIZE, 1);
- 
- 	poly1305_core_emit(&state, &rctx->header_hash);
- }
---- a/crypto/nhpoly1305.c
-+++ b/crypto/nhpoly1305.c
-@@ -33,6 +33,7 @@
- #include <asm/unaligned.h>
- #include <crypto/algapi.h>
- #include <crypto/internal/hash.h>
-+#include <crypto/internal/poly1305.h>
- #include <crypto/nhpoly1305.h>
- #include <linux/crypto.h>
- #include <linux/kernel.h>
-@@ -78,7 +79,7 @@ static void process_nh_hash_value(struct
- 	BUILD_BUG_ON(NH_HASH_BYTES % POLY1305_BLOCK_SIZE != 0);
- 
- 	poly1305_core_blocks(&state->poly_state, &key->poly_key, state->nh_hash,
--			     NH_HASH_BYTES / POLY1305_BLOCK_SIZE);
-+			     NH_HASH_BYTES / POLY1305_BLOCK_SIZE, 1);
- }
- 
- /*
---- a/crypto/poly1305_generic.c
-+++ b/crypto/poly1305_generic.c
-@@ -13,27 +13,12 @@
- 
- #include <crypto/algapi.h>
- #include <crypto/internal/hash.h>
--#include <crypto/poly1305.h>
-+#include <crypto/internal/poly1305.h>
- #include <linux/crypto.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <asm/unaligned.h>
- 
--static inline u64 mlt(u64 a, u64 b)
--{
--	return a * b;
--}
--
--static inline u32 sr(u64 v, u_char n)
--{
--	return v >> n;
--}
--
--static inline u32 and(u32 v, u32 mask)
--{
--	return v & mask;
--}
--
- int crypto_poly1305_init(struct shash_desc *desc)
- {
- 	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-@@ -47,124 +32,8 @@ int crypto_poly1305_init(struct shash_de
- }
- EXPORT_SYMBOL_GPL(crypto_poly1305_init);
- 
--void poly1305_core_setkey(struct poly1305_key *key, const u8 *raw_key)
--{
--	/* r &= 0xffffffc0ffffffc0ffffffc0fffffff */
--	key->r[0] = (get_unaligned_le32(raw_key +  0) >> 0) & 0x3ffffff;
--	key->r[1] = (get_unaligned_le32(raw_key +  3) >> 2) & 0x3ffff03;
--	key->r[2] = (get_unaligned_le32(raw_key +  6) >> 4) & 0x3ffc0ff;
--	key->r[3] = (get_unaligned_le32(raw_key +  9) >> 6) & 0x3f03fff;
--	key->r[4] = (get_unaligned_le32(raw_key + 12) >> 8) & 0x00fffff;
--}
--EXPORT_SYMBOL_GPL(poly1305_core_setkey);
--
--/*
-- * Poly1305 requires a unique key for each tag, which implies that we can't set
-- * it on the tfm that gets accessed by multiple users simultaneously. Instead we
-- * expect the key as the first 32 bytes in the update() call.
-- */
--unsigned int crypto_poly1305_setdesckey(struct poly1305_desc_ctx *dctx,
--					const u8 *src, unsigned int srclen)
--{
--	if (!dctx->sset) {
--		if (!dctx->rset && srclen >= POLY1305_BLOCK_SIZE) {
--			poly1305_core_setkey(&dctx->r, src);
--			src += POLY1305_BLOCK_SIZE;
--			srclen -= POLY1305_BLOCK_SIZE;
--			dctx->rset = true;
--		}
--		if (srclen >= POLY1305_BLOCK_SIZE) {
--			dctx->s[0] = get_unaligned_le32(src +  0);
--			dctx->s[1] = get_unaligned_le32(src +  4);
--			dctx->s[2] = get_unaligned_le32(src +  8);
--			dctx->s[3] = get_unaligned_le32(src + 12);
--			src += POLY1305_BLOCK_SIZE;
--			srclen -= POLY1305_BLOCK_SIZE;
--			dctx->sset = true;
--		}
--	}
--	return srclen;
--}
--EXPORT_SYMBOL_GPL(crypto_poly1305_setdesckey);
--
--static void poly1305_blocks_internal(struct poly1305_state *state,
--				     const struct poly1305_key *key,
--				     const void *src, unsigned int nblocks,
--				     u32 hibit)
--{
--	u32 r0, r1, r2, r3, r4;
--	u32 s1, s2, s3, s4;
--	u32 h0, h1, h2, h3, h4;
--	u64 d0, d1, d2, d3, d4;
--
--	if (!nblocks)
--		return;
--
--	r0 = key->r[0];
--	r1 = key->r[1];
--	r2 = key->r[2];
--	r3 = key->r[3];
--	r4 = key->r[4];
--
--	s1 = r1 * 5;
--	s2 = r2 * 5;
--	s3 = r3 * 5;
--	s4 = r4 * 5;
--
--	h0 = state->h[0];
--	h1 = state->h[1];
--	h2 = state->h[2];
--	h3 = state->h[3];
--	h4 = state->h[4];
--
--	do {
--		/* h += m[i] */
--		h0 += (get_unaligned_le32(src +  0) >> 0) & 0x3ffffff;
--		h1 += (get_unaligned_le32(src +  3) >> 2) & 0x3ffffff;
--		h2 += (get_unaligned_le32(src +  6) >> 4) & 0x3ffffff;
--		h3 += (get_unaligned_le32(src +  9) >> 6) & 0x3ffffff;
--		h4 += (get_unaligned_le32(src + 12) >> 8) | hibit;
--
--		/* h *= r */
--		d0 = mlt(h0, r0) + mlt(h1, s4) + mlt(h2, s3) +
--		     mlt(h3, s2) + mlt(h4, s1);
--		d1 = mlt(h0, r1) + mlt(h1, r0) + mlt(h2, s4) +
--		     mlt(h3, s3) + mlt(h4, s2);
--		d2 = mlt(h0, r2) + mlt(h1, r1) + mlt(h2, r0) +
--		     mlt(h3, s4) + mlt(h4, s3);
--		d3 = mlt(h0, r3) + mlt(h1, r2) + mlt(h2, r1) +
--		     mlt(h3, r0) + mlt(h4, s4);
--		d4 = mlt(h0, r4) + mlt(h1, r3) + mlt(h2, r2) +
--		     mlt(h3, r1) + mlt(h4, r0);
--
--		/* (partial) h %= p */
--		d1 += sr(d0, 26);     h0 = and(d0, 0x3ffffff);
--		d2 += sr(d1, 26);     h1 = and(d1, 0x3ffffff);
--		d3 += sr(d2, 26);     h2 = and(d2, 0x3ffffff);
--		d4 += sr(d3, 26);     h3 = and(d3, 0x3ffffff);
--		h0 += sr(d4, 26) * 5; h4 = and(d4, 0x3ffffff);
--		h1 += h0 >> 26;       h0 = h0 & 0x3ffffff;
--
--		src += POLY1305_BLOCK_SIZE;
--	} while (--nblocks);
--
--	state->h[0] = h0;
--	state->h[1] = h1;
--	state->h[2] = h2;
--	state->h[3] = h3;
--	state->h[4] = h4;
--}
--
--void poly1305_core_blocks(struct poly1305_state *state,
--			  const struct poly1305_key *key,
--			  const void *src, unsigned int nblocks)
--{
--	poly1305_blocks_internal(state, key, src, nblocks, 1 << 24);
--}
--EXPORT_SYMBOL_GPL(poly1305_core_blocks);
--
--static void poly1305_blocks(struct poly1305_desc_ctx *dctx,
--			    const u8 *src, unsigned int srclen, u32 hibit)
-+static void poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
-+			    unsigned int srclen)
- {
- 	unsigned int datalen;
- 
-@@ -174,8 +43,8 @@ static void poly1305_blocks(struct poly1
- 		srclen = datalen;
- 	}
- 
--	poly1305_blocks_internal(&dctx->h, &dctx->r,
--				 src, srclen / POLY1305_BLOCK_SIZE, hibit);
-+	poly1305_core_blocks(&dctx->h, &dctx->r, src,
-+			     srclen / POLY1305_BLOCK_SIZE, 1);
- }
- 
- int crypto_poly1305_update(struct shash_desc *desc,
-@@ -193,13 +62,13 @@ int crypto_poly1305_update(struct shash_
- 
- 		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
- 			poly1305_blocks(dctx, dctx->buf,
--					POLY1305_BLOCK_SIZE, 1 << 24);
-+					POLY1305_BLOCK_SIZE);
- 			dctx->buflen = 0;
- 		}
- 	}
- 
- 	if (likely(srclen >= POLY1305_BLOCK_SIZE)) {
--		poly1305_blocks(dctx, src, srclen, 1 << 24);
-+		poly1305_blocks(dctx, src, srclen);
- 		src += srclen - (srclen % POLY1305_BLOCK_SIZE);
- 		srclen %= POLY1305_BLOCK_SIZE;
- 	}
-@@ -213,54 +82,6 @@ int crypto_poly1305_update(struct shash_
- }
- EXPORT_SYMBOL_GPL(crypto_poly1305_update);
- 
--void poly1305_core_emit(const struct poly1305_state *state, void *dst)
--{
--	u32 h0, h1, h2, h3, h4;
--	u32 g0, g1, g2, g3, g4;
--	u32 mask;
--
--	/* fully carry h */
--	h0 = state->h[0];
--	h1 = state->h[1];
--	h2 = state->h[2];
--	h3 = state->h[3];
--	h4 = state->h[4];
--
--	h2 += (h1 >> 26);     h1 = h1 & 0x3ffffff;
--	h3 += (h2 >> 26);     h2 = h2 & 0x3ffffff;
--	h4 += (h3 >> 26);     h3 = h3 & 0x3ffffff;
--	h0 += (h4 >> 26) * 5; h4 = h4 & 0x3ffffff;
--	h1 += (h0 >> 26);     h0 = h0 & 0x3ffffff;
--
--	/* compute h + -p */
--	g0 = h0 + 5;
--	g1 = h1 + (g0 >> 26);             g0 &= 0x3ffffff;
--	g2 = h2 + (g1 >> 26);             g1 &= 0x3ffffff;
--	g3 = h3 + (g2 >> 26);             g2 &= 0x3ffffff;
--	g4 = h4 + (g3 >> 26) - (1 << 26); g3 &= 0x3ffffff;
--
--	/* select h if h < p, or h + -p if h >= p */
--	mask = (g4 >> ((sizeof(u32) * 8) - 1)) - 1;
--	g0 &= mask;
--	g1 &= mask;
--	g2 &= mask;
--	g3 &= mask;
--	g4 &= mask;
--	mask = ~mask;
--	h0 = (h0 & mask) | g0;
--	h1 = (h1 & mask) | g1;
--	h2 = (h2 & mask) | g2;
--	h3 = (h3 & mask) | g3;
--	h4 = (h4 & mask) | g4;
--
--	/* h = h % (2^128) */
--	put_unaligned_le32((h0 >>  0) | (h1 << 26), dst +  0);
--	put_unaligned_le32((h1 >>  6) | (h2 << 20), dst +  4);
--	put_unaligned_le32((h2 >> 12) | (h3 << 14), dst +  8);
--	put_unaligned_le32((h3 >> 18) | (h4 <<  8), dst + 12);
--}
--EXPORT_SYMBOL_GPL(poly1305_core_emit);
--
- int crypto_poly1305_final(struct shash_desc *desc, u8 *dst)
- {
- 	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-@@ -274,7 +95,7 @@ int crypto_poly1305_final(struct shash_d
- 		dctx->buf[dctx->buflen++] = 1;
- 		memset(dctx->buf + dctx->buflen, 0,
- 		       POLY1305_BLOCK_SIZE - dctx->buflen);
--		poly1305_blocks(dctx, dctx->buf, POLY1305_BLOCK_SIZE, 0);
-+		poly1305_core_blocks(&dctx->h, &dctx->r, dctx->buf, 1, 0);
- 	}
- 
- 	poly1305_core_emit(&dctx->h, digest);
---- /dev/null
-+++ b/include/crypto/internal/poly1305.h
-@@ -0,0 +1,67 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Common values for the Poly1305 algorithm
-+ */
-+
-+#ifndef _CRYPTO_INTERNAL_POLY1305_H
-+#define _CRYPTO_INTERNAL_POLY1305_H
-+
-+#include <asm/unaligned.h>
-+#include <linux/types.h>
-+#include <crypto/poly1305.h>
-+
-+struct shash_desc;
-+
-+/*
-+ * Poly1305 core functions.  These implement the ε-almost-∆-universal hash
-+ * function underlying the Poly1305 MAC, i.e. they don't add an encrypted nonce
-+ * ("s key") at the end.  They also only support block-aligned inputs.
-+ */
-+void poly1305_core_setkey(struct poly1305_key *key, const u8 *raw_key);
-+static inline void poly1305_core_init(struct poly1305_state *state)
-+{
-+	*state = (struct poly1305_state){};
-+}
-+
-+void poly1305_core_blocks(struct poly1305_state *state,
-+			  const struct poly1305_key *key, const void *src,
-+			  unsigned int nblocks, u32 hibit);
-+void poly1305_core_emit(const struct poly1305_state *state, void *dst);
-+
-+/* Crypto API helper functions for the Poly1305 MAC */
-+int crypto_poly1305_init(struct shash_desc *desc);
-+
-+int crypto_poly1305_update(struct shash_desc *desc,
-+			   const u8 *src, unsigned int srclen);
-+int crypto_poly1305_final(struct shash_desc *desc, u8 *dst);
-+
-+/*
-+ * Poly1305 requires a unique key for each tag, which implies that we can't set
-+ * it on the tfm that gets accessed by multiple users simultaneously. Instead we
-+ * expect the key as the first 32 bytes in the update() call.
-+ */
-+static inline
-+unsigned int crypto_poly1305_setdesckey(struct poly1305_desc_ctx *dctx,
-+					const u8 *src, unsigned int srclen)
-+{
-+	if (!dctx->sset) {
-+		if (!dctx->rset && srclen >= POLY1305_BLOCK_SIZE) {
-+			poly1305_core_setkey(&dctx->r, src);
-+			src += POLY1305_BLOCK_SIZE;
-+			srclen -= POLY1305_BLOCK_SIZE;
-+			dctx->rset = true;
-+		}
-+		if (srclen >= POLY1305_BLOCK_SIZE) {
-+			dctx->s[0] = get_unaligned_le32(src +  0);
-+			dctx->s[1] = get_unaligned_le32(src +  4);
-+			dctx->s[2] = get_unaligned_le32(src +  8);
-+			dctx->s[3] = get_unaligned_le32(src + 12);
-+			src += POLY1305_BLOCK_SIZE;
-+			srclen -= POLY1305_BLOCK_SIZE;
-+			dctx->sset = true;
-+		}
-+	}
-+	return srclen;
-+}
-+
-+#endif
---- a/include/crypto/poly1305.h
-+++ b/include/crypto/poly1305.h
-@@ -38,27 +38,4 @@ struct poly1305_desc_ctx {
- 	bool sset;
- };
- 
--/*
-- * Poly1305 core functions.  These implement the ε-almost-∆-universal hash
-- * function underlying the Poly1305 MAC, i.e. they don't add an encrypted nonce
-- * ("s key") at the end.  They also only support block-aligned inputs.
-- */
--void poly1305_core_setkey(struct poly1305_key *key, const u8 *raw_key);
--static inline void poly1305_core_init(struct poly1305_state *state)
--{
--	memset(state->h, 0, sizeof(state->h));
--}
--void poly1305_core_blocks(struct poly1305_state *state,
--			  const struct poly1305_key *key,
--			  const void *src, unsigned int nblocks);
--void poly1305_core_emit(const struct poly1305_state *state, void *dst);
--
--/* Crypto API helper functions for the Poly1305 MAC */
--int crypto_poly1305_init(struct shash_desc *desc);
--unsigned int crypto_poly1305_setdesckey(struct poly1305_desc_ctx *dctx,
--					const u8 *src, unsigned int srclen);
--int crypto_poly1305_update(struct shash_desc *desc,
--			   const u8 *src, unsigned int srclen);
--int crypto_poly1305_final(struct shash_desc *desc, u8 *dst);
--
- #endif
---- a/lib/crypto/Kconfig
-+++ b/lib/crypto/Kconfig
-@@ -37,5 +37,8 @@ config CRYPTO_LIB_CHACHA
- config CRYPTO_LIB_DES
- 	tristate
- 
-+config CRYPTO_LIB_POLY1305_GENERIC
-+	tristate
-+
- config CRYPTO_LIB_SHA256
- 	tristate
---- a/lib/crypto/Makefile
-+++ b/lib/crypto/Makefile
-@@ -13,5 +13,8 @@ libarc4-y					:= arc4.o
- obj-$(CONFIG_CRYPTO_LIB_DES)			+= libdes.o
- libdes-y					:= des.o
- 
-+obj-$(CONFIG_CRYPTO_LIB_POLY1305_GENERIC)	+= libpoly1305.o
-+libpoly1305-y					:= poly1305.o
-+
- obj-$(CONFIG_CRYPTO_LIB_SHA256)			+= libsha256.o
- libsha256-y					:= sha256.o
---- /dev/null
-+++ b/lib/crypto/poly1305.c
-@@ -0,0 +1,158 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * Poly1305 authenticator algorithm, RFC7539
-+ *
-+ * Copyright (C) 2015 Martin Willi
-+ *
-+ * Based on public domain code by Andrew Moon and Daniel J. Bernstein.
-+ */
-+
-+#include <crypto/internal/poly1305.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <asm/unaligned.h>
-+
-+static inline u64 mlt(u64 a, u64 b)
-+{
-+	return a * b;
-+}
-+
-+static inline u32 sr(u64 v, u_char n)
-+{
-+	return v >> n;
-+}
-+
-+static inline u32 and(u32 v, u32 mask)
-+{
-+	return v & mask;
-+}
-+
-+void poly1305_core_setkey(struct poly1305_key *key, const u8 *raw_key)
-+{
-+	/* r &= 0xffffffc0ffffffc0ffffffc0fffffff */
-+	key->r[0] = (get_unaligned_le32(raw_key +  0) >> 0) & 0x3ffffff;
-+	key->r[1] = (get_unaligned_le32(raw_key +  3) >> 2) & 0x3ffff03;
-+	key->r[2] = (get_unaligned_le32(raw_key +  6) >> 4) & 0x3ffc0ff;
-+	key->r[3] = (get_unaligned_le32(raw_key +  9) >> 6) & 0x3f03fff;
-+	key->r[4] = (get_unaligned_le32(raw_key + 12) >> 8) & 0x00fffff;
-+}
-+EXPORT_SYMBOL_GPL(poly1305_core_setkey);
-+
-+void poly1305_core_blocks(struct poly1305_state *state,
-+			  const struct poly1305_key *key, const void *src,
-+			  unsigned int nblocks, u32 hibit)
-+{
-+	u32 r0, r1, r2, r3, r4;
-+	u32 s1, s2, s3, s4;
-+	u32 h0, h1, h2, h3, h4;
-+	u64 d0, d1, d2, d3, d4;
-+
-+	if (!nblocks)
-+		return;
-+
-+	r0 = key->r[0];
-+	r1 = key->r[1];
-+	r2 = key->r[2];
-+	r3 = key->r[3];
-+	r4 = key->r[4];
-+
-+	s1 = r1 * 5;
-+	s2 = r2 * 5;
-+	s3 = r3 * 5;
-+	s4 = r4 * 5;
-+
-+	h0 = state->h[0];
-+	h1 = state->h[1];
-+	h2 = state->h[2];
-+	h3 = state->h[3];
-+	h4 = state->h[4];
-+
-+	do {
-+		/* h += m[i] */
-+		h0 += (get_unaligned_le32(src +  0) >> 0) & 0x3ffffff;
-+		h1 += (get_unaligned_le32(src +  3) >> 2) & 0x3ffffff;
-+		h2 += (get_unaligned_le32(src +  6) >> 4) & 0x3ffffff;
-+		h3 += (get_unaligned_le32(src +  9) >> 6) & 0x3ffffff;
-+		h4 += (get_unaligned_le32(src + 12) >> 8) | (hibit << 24);
-+
-+		/* h *= r */
-+		d0 = mlt(h0, r0) + mlt(h1, s4) + mlt(h2, s3) +
-+		     mlt(h3, s2) + mlt(h4, s1);
-+		d1 = mlt(h0, r1) + mlt(h1, r0) + mlt(h2, s4) +
-+		     mlt(h3, s3) + mlt(h4, s2);
-+		d2 = mlt(h0, r2) + mlt(h1, r1) + mlt(h2, r0) +
-+		     mlt(h3, s4) + mlt(h4, s3);
-+		d3 = mlt(h0, r3) + mlt(h1, r2) + mlt(h2, r1) +
-+		     mlt(h3, r0) + mlt(h4, s4);
-+		d4 = mlt(h0, r4) + mlt(h1, r3) + mlt(h2, r2) +
-+		     mlt(h3, r1) + mlt(h4, r0);
-+
-+		/* (partial) h %= p */
-+		d1 += sr(d0, 26);     h0 = and(d0, 0x3ffffff);
-+		d2 += sr(d1, 26);     h1 = and(d1, 0x3ffffff);
-+		d3 += sr(d2, 26);     h2 = and(d2, 0x3ffffff);
-+		d4 += sr(d3, 26);     h3 = and(d3, 0x3ffffff);
-+		h0 += sr(d4, 26) * 5; h4 = and(d4, 0x3ffffff);
-+		h1 += h0 >> 26;       h0 = h0 & 0x3ffffff;
-+
-+		src += POLY1305_BLOCK_SIZE;
-+	} while (--nblocks);
-+
-+	state->h[0] = h0;
-+	state->h[1] = h1;
-+	state->h[2] = h2;
-+	state->h[3] = h3;
-+	state->h[4] = h4;
-+}
-+EXPORT_SYMBOL_GPL(poly1305_core_blocks);
-+
-+void poly1305_core_emit(const struct poly1305_state *state, void *dst)
-+{
-+	u32 h0, h1, h2, h3, h4;
-+	u32 g0, g1, g2, g3, g4;
-+	u32 mask;
-+
-+	/* fully carry h */
-+	h0 = state->h[0];
-+	h1 = state->h[1];
-+	h2 = state->h[2];
-+	h3 = state->h[3];
-+	h4 = state->h[4];
-+
-+	h2 += (h1 >> 26);     h1 = h1 & 0x3ffffff;
-+	h3 += (h2 >> 26);     h2 = h2 & 0x3ffffff;
-+	h4 += (h3 >> 26);     h3 = h3 & 0x3ffffff;
-+	h0 += (h4 >> 26) * 5; h4 = h4 & 0x3ffffff;
-+	h1 += (h0 >> 26);     h0 = h0 & 0x3ffffff;
-+
-+	/* compute h + -p */
-+	g0 = h0 + 5;
-+	g1 = h1 + (g0 >> 26);             g0 &= 0x3ffffff;
-+	g2 = h2 + (g1 >> 26);             g1 &= 0x3ffffff;
-+	g3 = h3 + (g2 >> 26);             g2 &= 0x3ffffff;
-+	g4 = h4 + (g3 >> 26) - (1 << 26); g3 &= 0x3ffffff;
-+
-+	/* select h if h < p, or h + -p if h >= p */
-+	mask = (g4 >> ((sizeof(u32) * 8) - 1)) - 1;
-+	g0 &= mask;
-+	g1 &= mask;
-+	g2 &= mask;
-+	g3 &= mask;
-+	g4 &= mask;
-+	mask = ~mask;
-+	h0 = (h0 & mask) | g0;
-+	h1 = (h1 & mask) | g1;
-+	h2 = (h2 & mask) | g2;
-+	h3 = (h3 & mask) | g3;
-+	h4 = (h4 & mask) | g4;
-+
-+	/* h = h % (2^128) */
-+	put_unaligned_le32((h0 >>  0) | (h1 << 26), dst +  0);
-+	put_unaligned_le32((h1 >>  6) | (h2 << 20), dst +  4);
-+	put_unaligned_le32((h2 >> 12) | (h3 << 14), dst +  8);
-+	put_unaligned_le32((h3 >> 18) | (h4 <<  8), dst + 12);
-+}
-+EXPORT_SYMBOL_GPL(poly1305_core_emit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Martin Willi <martin@strongswan.org>");
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0014-crypto-x86-poly1305-unify-Poly1305-state-struct-with.patch b/target/linux/generic/backport-5.4/080-wireguard-0014-crypto-x86-poly1305-unify-Poly1305-state-struct-with.patch
deleted file mode 100644
index 7d237549b0..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0014-crypto-x86-poly1305-unify-Poly1305-state-struct-with.patch
+++ /dev/null
@@ -1,251 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:20 +0100
-Subject: [PATCH] crypto: x86/poly1305 - unify Poly1305 state struct with
- generic code
-
-commit ad8f5b88383ea685f2b8df2a12ee3e08089a1287 upstream.
-
-In preparation of exposing a Poly1305 library interface directly from
-the accelerated x86 driver, align the state descriptor of the x86 code
-with the one used by the generic driver. This is needed to make the
-library interface unified between all implementations.
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/poly1305_glue.c    | 88 ++++++++++--------------------
- crypto/poly1305_generic.c          |  6 +-
- include/crypto/internal/poly1305.h |  4 +-
- include/crypto/poly1305.h          | 18 +++---
- 4 files changed, 43 insertions(+), 73 deletions(-)
-
---- a/arch/x86/crypto/poly1305_glue.c
-+++ b/arch/x86/crypto/poly1305_glue.c
-@@ -14,40 +14,14 @@
- #include <linux/module.h>
- #include <asm/simd.h>
- 
--struct poly1305_simd_desc_ctx {
--	struct poly1305_desc_ctx base;
--	/* derived key u set? */
--	bool uset;
--#ifdef CONFIG_AS_AVX2
--	/* derived keys r^3, r^4 set? */
--	bool wset;
--#endif
--	/* derived Poly1305 key r^2 */
--	u32 u[5];
--	/* ... silently appended r^3 and r^4 when using AVX2 */
--};
--
- asmlinkage void poly1305_block_sse2(u32 *h, const u8 *src,
- 				    const u32 *r, unsigned int blocks);
- asmlinkage void poly1305_2block_sse2(u32 *h, const u8 *src, const u32 *r,
- 				     unsigned int blocks, const u32 *u);
--#ifdef CONFIG_AS_AVX2
- asmlinkage void poly1305_4block_avx2(u32 *h, const u8 *src, const u32 *r,
- 				     unsigned int blocks, const u32 *u);
--static bool poly1305_use_avx2;
--#endif
- 
--static int poly1305_simd_init(struct shash_desc *desc)
--{
--	struct poly1305_simd_desc_ctx *sctx = shash_desc_ctx(desc);
--
--	sctx->uset = false;
--#ifdef CONFIG_AS_AVX2
--	sctx->wset = false;
--#endif
--
--	return crypto_poly1305_init(desc);
--}
-+static bool poly1305_use_avx2 __ro_after_init;
- 
- static void poly1305_simd_mult(u32 *a, const u32 *b)
- {
-@@ -63,53 +37,49 @@ static void poly1305_simd_mult(u32 *a, c
- static unsigned int poly1305_simd_blocks(struct poly1305_desc_ctx *dctx,
- 					 const u8 *src, unsigned int srclen)
- {
--	struct poly1305_simd_desc_ctx *sctx;
- 	unsigned int blocks, datalen;
- 
--	BUILD_BUG_ON(offsetof(struct poly1305_simd_desc_ctx, base));
--	sctx = container_of(dctx, struct poly1305_simd_desc_ctx, base);
--
- 	if (unlikely(!dctx->sset)) {
- 		datalen = crypto_poly1305_setdesckey(dctx, src, srclen);
- 		src += srclen - datalen;
- 		srclen = datalen;
- 	}
- 
--#ifdef CONFIG_AS_AVX2
--	if (poly1305_use_avx2 && srclen >= POLY1305_BLOCK_SIZE * 4) {
--		if (unlikely(!sctx->wset)) {
--			if (!sctx->uset) {
--				memcpy(sctx->u, dctx->r.r, sizeof(sctx->u));
--				poly1305_simd_mult(sctx->u, dctx->r.r);
--				sctx->uset = true;
-+	if (IS_ENABLED(CONFIG_AS_AVX2) &&
-+	    poly1305_use_avx2 &&
-+	    srclen >= POLY1305_BLOCK_SIZE * 4) {
-+		if (unlikely(dctx->rset < 4)) {
-+			if (dctx->rset < 2) {
-+				dctx->r[1] = dctx->r[0];
-+				poly1305_simd_mult(dctx->r[1].r, dctx->r[0].r);
- 			}
--			memcpy(sctx->u + 5, sctx->u, sizeof(sctx->u));
--			poly1305_simd_mult(sctx->u + 5, dctx->r.r);
--			memcpy(sctx->u + 10, sctx->u + 5, sizeof(sctx->u));
--			poly1305_simd_mult(sctx->u + 10, dctx->r.r);
--			sctx->wset = true;
-+			dctx->r[2] = dctx->r[1];
-+			poly1305_simd_mult(dctx->r[2].r, dctx->r[0].r);
-+			dctx->r[3] = dctx->r[2];
-+			poly1305_simd_mult(dctx->r[3].r, dctx->r[0].r);
-+			dctx->rset = 4;
- 		}
- 		blocks = srclen / (POLY1305_BLOCK_SIZE * 4);
--		poly1305_4block_avx2(dctx->h.h, src, dctx->r.r, blocks,
--				     sctx->u);
-+		poly1305_4block_avx2(dctx->h.h, src, dctx->r[0].r, blocks,
-+				     dctx->r[1].r);
- 		src += POLY1305_BLOCK_SIZE * 4 * blocks;
- 		srclen -= POLY1305_BLOCK_SIZE * 4 * blocks;
- 	}
--#endif
-+
- 	if (likely(srclen >= POLY1305_BLOCK_SIZE * 2)) {
--		if (unlikely(!sctx->uset)) {
--			memcpy(sctx->u, dctx->r.r, sizeof(sctx->u));
--			poly1305_simd_mult(sctx->u, dctx->r.r);
--			sctx->uset = true;
-+		if (unlikely(dctx->rset < 2)) {
-+			dctx->r[1] = dctx->r[0];
-+			poly1305_simd_mult(dctx->r[1].r, dctx->r[0].r);
-+			dctx->rset = 2;
- 		}
- 		blocks = srclen / (POLY1305_BLOCK_SIZE * 2);
--		poly1305_2block_sse2(dctx->h.h, src, dctx->r.r, blocks,
--				     sctx->u);
-+		poly1305_2block_sse2(dctx->h.h, src, dctx->r[0].r,
-+				     blocks, dctx->r[1].r);
- 		src += POLY1305_BLOCK_SIZE * 2 * blocks;
- 		srclen -= POLY1305_BLOCK_SIZE * 2 * blocks;
- 	}
- 	if (srclen >= POLY1305_BLOCK_SIZE) {
--		poly1305_block_sse2(dctx->h.h, src, dctx->r.r, 1);
-+		poly1305_block_sse2(dctx->h.h, src, dctx->r[0].r, 1);
- 		srclen -= POLY1305_BLOCK_SIZE;
- 	}
- 	return srclen;
-@@ -159,10 +129,10 @@ static int poly1305_simd_update(struct s
- 
- static struct shash_alg alg = {
- 	.digestsize	= POLY1305_DIGEST_SIZE,
--	.init		= poly1305_simd_init,
-+	.init		= crypto_poly1305_init,
- 	.update		= poly1305_simd_update,
- 	.final		= crypto_poly1305_final,
--	.descsize	= sizeof(struct poly1305_simd_desc_ctx),
-+	.descsize	= sizeof(struct poly1305_desc_ctx),
- 	.base		= {
- 		.cra_name		= "poly1305",
- 		.cra_driver_name	= "poly1305-simd",
-@@ -177,14 +147,14 @@ static int __init poly1305_simd_mod_init
- 	if (!boot_cpu_has(X86_FEATURE_XMM2))
- 		return -ENODEV;
- 
--#ifdef CONFIG_AS_AVX2
--	poly1305_use_avx2 = boot_cpu_has(X86_FEATURE_AVX) &&
-+	poly1305_use_avx2 = IS_ENABLED(CONFIG_AS_AVX2) &&
-+			    boot_cpu_has(X86_FEATURE_AVX) &&
- 			    boot_cpu_has(X86_FEATURE_AVX2) &&
- 			    cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM, NULL);
--	alg.descsize = sizeof(struct poly1305_simd_desc_ctx);
-+	alg.descsize = sizeof(struct poly1305_desc_ctx) + 5 * sizeof(u32);
- 	if (poly1305_use_avx2)
- 		alg.descsize += 10 * sizeof(u32);
--#endif
-+
- 	return crypto_register_shash(&alg);
- }
- 
---- a/crypto/poly1305_generic.c
-+++ b/crypto/poly1305_generic.c
-@@ -25,7 +25,7 @@ int crypto_poly1305_init(struct shash_de
- 
- 	poly1305_core_init(&dctx->h);
- 	dctx->buflen = 0;
--	dctx->rset = false;
-+	dctx->rset = 0;
- 	dctx->sset = false;
- 
- 	return 0;
-@@ -43,7 +43,7 @@ static void poly1305_blocks(struct poly1
- 		srclen = datalen;
- 	}
- 
--	poly1305_core_blocks(&dctx->h, &dctx->r, src,
-+	poly1305_core_blocks(&dctx->h, dctx->r, src,
- 			     srclen / POLY1305_BLOCK_SIZE, 1);
- }
- 
-@@ -95,7 +95,7 @@ int crypto_poly1305_final(struct shash_d
- 		dctx->buf[dctx->buflen++] = 1;
- 		memset(dctx->buf + dctx->buflen, 0,
- 		       POLY1305_BLOCK_SIZE - dctx->buflen);
--		poly1305_core_blocks(&dctx->h, &dctx->r, dctx->buf, 1, 0);
-+		poly1305_core_blocks(&dctx->h, dctx->r, dctx->buf, 1, 0);
- 	}
- 
- 	poly1305_core_emit(&dctx->h, digest);
---- a/include/crypto/internal/poly1305.h
-+++ b/include/crypto/internal/poly1305.h
-@@ -46,10 +46,10 @@ unsigned int crypto_poly1305_setdesckey(
- {
- 	if (!dctx->sset) {
- 		if (!dctx->rset && srclen >= POLY1305_BLOCK_SIZE) {
--			poly1305_core_setkey(&dctx->r, src);
-+			poly1305_core_setkey(dctx->r, src);
- 			src += POLY1305_BLOCK_SIZE;
- 			srclen -= POLY1305_BLOCK_SIZE;
--			dctx->rset = true;
-+			dctx->rset = 1;
- 		}
- 		if (srclen >= POLY1305_BLOCK_SIZE) {
- 			dctx->s[0] = get_unaligned_le32(src +  0);
---- a/include/crypto/poly1305.h
-+++ b/include/crypto/poly1305.h
-@@ -22,20 +22,20 @@ struct poly1305_state {
- };
- 
- struct poly1305_desc_ctx {
--	/* key */
--	struct poly1305_key r;
--	/* finalize key */
--	u32 s[4];
--	/* accumulator */
--	struct poly1305_state h;
- 	/* partial buffer */
- 	u8 buf[POLY1305_BLOCK_SIZE];
- 	/* bytes used in partial buffer */
- 	unsigned int buflen;
--	/* r key has been set */
--	bool rset;
--	/* s key has been set */
-+	/* how many keys have been set in r[] */
-+	unsigned short rset;
-+	/* whether s[] has been set */
- 	bool sset;
-+	/* finalize key */
-+	u32 s[4];
-+	/* accumulator */
-+	struct poly1305_state h;
-+	/* key */
-+	struct poly1305_key r[1];
- };
- 
- #endif
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0015-crypto-poly1305-expose-init-update-final-library-int.patch b/target/linux/generic/backport-5.4/080-wireguard-0015-crypto-poly1305-expose-init-update-final-library-int.patch
deleted file mode 100644
index bf8e90bf02..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0015-crypto-poly1305-expose-init-update-final-library-int.patch
+++ /dev/null
@@ -1,224 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:21 +0100
-Subject: [PATCH] crypto: poly1305 - expose init/update/final library interface
-
-commit a1d93064094cc5e24d64e35cf093e7191d0c9344 upstream.
-
-Expose the existing generic Poly1305 code via a init/update/final
-library interface so that callers are not required to go through
-the crypto API's shash abstraction to access it. At the same time,
-make some preparations so that the library implementation can be
-superseded by an accelerated arch-specific version in the future.
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- crypto/poly1305_generic.c | 22 +-----------
- include/crypto/poly1305.h | 38 +++++++++++++++++++-
- lib/crypto/Kconfig        | 26 ++++++++++++++
- lib/crypto/poly1305.c     | 74 +++++++++++++++++++++++++++++++++++++++
- 4 files changed, 138 insertions(+), 22 deletions(-)
-
---- a/crypto/poly1305_generic.c
-+++ b/crypto/poly1305_generic.c
-@@ -85,31 +85,11 @@ EXPORT_SYMBOL_GPL(crypto_poly1305_update
- int crypto_poly1305_final(struct shash_desc *desc, u8 *dst)
- {
- 	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
--	__le32 digest[4];
--	u64 f = 0;
- 
- 	if (unlikely(!dctx->sset))
- 		return -ENOKEY;
- 
--	if (unlikely(dctx->buflen)) {
--		dctx->buf[dctx->buflen++] = 1;
--		memset(dctx->buf + dctx->buflen, 0,
--		       POLY1305_BLOCK_SIZE - dctx->buflen);
--		poly1305_core_blocks(&dctx->h, dctx->r, dctx->buf, 1, 0);
--	}
--
--	poly1305_core_emit(&dctx->h, digest);
--
--	/* mac = (h + s) % (2^128) */
--	f = (f >> 32) + le32_to_cpu(digest[0]) + dctx->s[0];
--	put_unaligned_le32(f, dst + 0);
--	f = (f >> 32) + le32_to_cpu(digest[1]) + dctx->s[1];
--	put_unaligned_le32(f, dst + 4);
--	f = (f >> 32) + le32_to_cpu(digest[2]) + dctx->s[2];
--	put_unaligned_le32(f, dst + 8);
--	f = (f >> 32) + le32_to_cpu(digest[3]) + dctx->s[3];
--	put_unaligned_le32(f, dst + 12);
--
-+	poly1305_final_generic(dctx, dst);
- 	return 0;
- }
- EXPORT_SYMBOL_GPL(crypto_poly1305_final);
---- a/include/crypto/poly1305.h
-+++ b/include/crypto/poly1305.h
-@@ -35,7 +35,43 @@ struct poly1305_desc_ctx {
- 	/* accumulator */
- 	struct poly1305_state h;
- 	/* key */
--	struct poly1305_key r[1];
-+	struct poly1305_key r[CONFIG_CRYPTO_LIB_POLY1305_RSIZE];
- };
- 
-+void poly1305_init_arch(struct poly1305_desc_ctx *desc, const u8 *key);
-+void poly1305_init_generic(struct poly1305_desc_ctx *desc, const u8 *key);
-+
-+static inline void poly1305_init(struct poly1305_desc_ctx *desc, const u8 *key)
-+{
-+	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305))
-+		poly1305_init_arch(desc, key);
-+	else
-+		poly1305_init_generic(desc, key);
-+}
-+
-+void poly1305_update_arch(struct poly1305_desc_ctx *desc, const u8 *src,
-+			  unsigned int nbytes);
-+void poly1305_update_generic(struct poly1305_desc_ctx *desc, const u8 *src,
-+			     unsigned int nbytes);
-+
-+static inline void poly1305_update(struct poly1305_desc_ctx *desc,
-+				   const u8 *src, unsigned int nbytes)
-+{
-+	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305))
-+		poly1305_update_arch(desc, src, nbytes);
-+	else
-+		poly1305_update_generic(desc, src, nbytes);
-+}
-+
-+void poly1305_final_arch(struct poly1305_desc_ctx *desc, u8 *digest);
-+void poly1305_final_generic(struct poly1305_desc_ctx *desc, u8 *digest);
-+
-+static inline void poly1305_final(struct poly1305_desc_ctx *desc, u8 *digest)
-+{
-+	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305))
-+		poly1305_final_arch(desc, digest);
-+	else
-+		poly1305_final_generic(desc, digest);
-+}
-+
- #endif
---- a/lib/crypto/Kconfig
-+++ b/lib/crypto/Kconfig
-@@ -37,8 +37,34 @@ config CRYPTO_LIB_CHACHA
- config CRYPTO_LIB_DES
- 	tristate
- 
-+config CRYPTO_LIB_POLY1305_RSIZE
-+	int
-+	default 1
-+
-+config CRYPTO_ARCH_HAVE_LIB_POLY1305
-+	tristate
-+	help
-+	  Declares whether the architecture provides an arch-specific
-+	  accelerated implementation of the Poly1305 library interface,
-+	  either builtin or as a module.
-+
- config CRYPTO_LIB_POLY1305_GENERIC
- 	tristate
-+	help
-+	  This symbol can be depended upon by arch implementations of the
-+	  Poly1305 library interface that require the generic code as a
-+	  fallback, e.g., for SIMD implementations. If no arch specific
-+	  implementation is enabled, this implementation serves the users
-+	  of CRYPTO_LIB_POLY1305.
-+
-+config CRYPTO_LIB_POLY1305
-+	tristate "Poly1305 library interface"
-+	depends on CRYPTO_ARCH_HAVE_LIB_POLY1305 || !CRYPTO_ARCH_HAVE_LIB_POLY1305
-+	select CRYPTO_LIB_POLY1305_GENERIC if CRYPTO_ARCH_HAVE_LIB_POLY1305=n
-+	help
-+	  Enable the Poly1305 library interface. This interface may be fulfilled
-+	  by either the generic implementation or an arch-specific one, if one
-+	  is available and enabled.
- 
- config CRYPTO_LIB_SHA256
- 	tristate
---- a/lib/crypto/poly1305.c
-+++ b/lib/crypto/poly1305.c
-@@ -154,5 +154,79 @@ void poly1305_core_emit(const struct pol
- }
- EXPORT_SYMBOL_GPL(poly1305_core_emit);
- 
-+void poly1305_init_generic(struct poly1305_desc_ctx *desc, const u8 *key)
-+{
-+	poly1305_core_setkey(desc->r, key);
-+	desc->s[0] = get_unaligned_le32(key + 16);
-+	desc->s[1] = get_unaligned_le32(key + 20);
-+	desc->s[2] = get_unaligned_le32(key + 24);
-+	desc->s[3] = get_unaligned_le32(key + 28);
-+	poly1305_core_init(&desc->h);
-+	desc->buflen = 0;
-+	desc->sset = true;
-+	desc->rset = 1;
-+}
-+EXPORT_SYMBOL_GPL(poly1305_init_generic);
-+
-+void poly1305_update_generic(struct poly1305_desc_ctx *desc, const u8 *src,
-+			     unsigned int nbytes)
-+{
-+	unsigned int bytes;
-+
-+	if (unlikely(desc->buflen)) {
-+		bytes = min(nbytes, POLY1305_BLOCK_SIZE - desc->buflen);
-+		memcpy(desc->buf + desc->buflen, src, bytes);
-+		src += bytes;
-+		nbytes -= bytes;
-+		desc->buflen += bytes;
-+
-+		if (desc->buflen == POLY1305_BLOCK_SIZE) {
-+			poly1305_core_blocks(&desc->h, desc->r, desc->buf, 1, 1);
-+			desc->buflen = 0;
-+		}
-+	}
-+
-+	if (likely(nbytes >= POLY1305_BLOCK_SIZE)) {
-+		poly1305_core_blocks(&desc->h, desc->r, src,
-+				     nbytes / POLY1305_BLOCK_SIZE, 1);
-+		src += nbytes - (nbytes % POLY1305_BLOCK_SIZE);
-+		nbytes %= POLY1305_BLOCK_SIZE;
-+	}
-+
-+	if (unlikely(nbytes)) {
-+		desc->buflen = nbytes;
-+		memcpy(desc->buf, src, nbytes);
-+	}
-+}
-+EXPORT_SYMBOL_GPL(poly1305_update_generic);
-+
-+void poly1305_final_generic(struct poly1305_desc_ctx *desc, u8 *dst)
-+{
-+	__le32 digest[4];
-+	u64 f = 0;
-+
-+	if (unlikely(desc->buflen)) {
-+		desc->buf[desc->buflen++] = 1;
-+		memset(desc->buf + desc->buflen, 0,
-+		       POLY1305_BLOCK_SIZE - desc->buflen);
-+		poly1305_core_blocks(&desc->h, desc->r, desc->buf, 1, 0);
-+	}
-+
-+	poly1305_core_emit(&desc->h, digest);
-+
-+	/* mac = (h + s) % (2^128) */
-+	f = (f >> 32) + le32_to_cpu(digest[0]) + desc->s[0];
-+	put_unaligned_le32(f, dst + 0);
-+	f = (f >> 32) + le32_to_cpu(digest[1]) + desc->s[1];
-+	put_unaligned_le32(f, dst + 4);
-+	f = (f >> 32) + le32_to_cpu(digest[2]) + desc->s[2];
-+	put_unaligned_le32(f, dst + 8);
-+	f = (f >> 32) + le32_to_cpu(digest[3]) + desc->s[3];
-+	put_unaligned_le32(f, dst + 12);
-+
-+	*desc = (struct poly1305_desc_ctx){};
-+}
-+EXPORT_SYMBOL_GPL(poly1305_final_generic);
-+
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Martin Willi <martin@strongswan.org>");
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0016-crypto-x86-poly1305-depend-on-generic-library-not-ge.patch b/target/linux/generic/backport-5.4/080-wireguard-0016-crypto-x86-poly1305-depend-on-generic-library-not-ge.patch
deleted file mode 100644
index 8ea63f3b91..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0016-crypto-x86-poly1305-depend-on-generic-library-not-ge.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:22 +0100
-Subject: [PATCH] crypto: x86/poly1305 - depend on generic library not generic
- shash
-
-commit 1b2c6a5120489d41c8ea3b8dacd0b4586289b158 upstream.
-
-Remove the dependency on the generic Poly1305 driver. Instead, depend
-on the generic library so that we only reuse code without pulling in
-the generic skcipher implementation as well.
-
-While at it, remove the logic that prefers the non-SIMD path for short
-inputs - this is no longer necessary after recent FPU handling changes
-on x86.
-
-Since this removes the last remaining user of the routines exported
-by the generic shash driver, unexport them and make them static.
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/poly1305_glue.c    | 66 +++++++++++++++++++++++++-----
- crypto/Kconfig                     |  2 +-
- crypto/poly1305_generic.c          | 11 ++---
- include/crypto/internal/poly1305.h |  9 ----
- 4 files changed, 60 insertions(+), 28 deletions(-)
-
---- a/arch/x86/crypto/poly1305_glue.c
-+++ b/arch/x86/crypto/poly1305_glue.c
-@@ -34,6 +34,24 @@ static void poly1305_simd_mult(u32 *a, c
- 	poly1305_block_sse2(a, m, b, 1);
- }
- 
-+static unsigned int poly1305_scalar_blocks(struct poly1305_desc_ctx *dctx,
-+					   const u8 *src, unsigned int srclen)
-+{
-+	unsigned int datalen;
-+
-+	if (unlikely(!dctx->sset)) {
-+		datalen = crypto_poly1305_setdesckey(dctx, src, srclen);
-+		src += srclen - datalen;
-+		srclen = datalen;
-+	}
-+	if (srclen >= POLY1305_BLOCK_SIZE) {
-+		poly1305_core_blocks(&dctx->h, dctx->r, src,
-+				     srclen / POLY1305_BLOCK_SIZE, 1);
-+		srclen %= POLY1305_BLOCK_SIZE;
-+	}
-+	return srclen;
-+}
-+
- static unsigned int poly1305_simd_blocks(struct poly1305_desc_ctx *dctx,
- 					 const u8 *src, unsigned int srclen)
- {
-@@ -91,12 +109,6 @@ static int poly1305_simd_update(struct s
- 	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
- 	unsigned int bytes;
- 
--	/* kernel_fpu_begin/end is costly, use fallback for small updates */
--	if (srclen <= 288 || !crypto_simd_usable())
--		return crypto_poly1305_update(desc, src, srclen);
--
--	kernel_fpu_begin();
--
- 	if (unlikely(dctx->buflen)) {
- 		bytes = min(srclen, POLY1305_BLOCK_SIZE - dctx->buflen);
- 		memcpy(dctx->buf + dctx->buflen, src, bytes);
-@@ -105,25 +117,57 @@ static int poly1305_simd_update(struct s
- 		dctx->buflen += bytes;
- 
- 		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
--			poly1305_simd_blocks(dctx, dctx->buf,
--					     POLY1305_BLOCK_SIZE);
-+			if (likely(crypto_simd_usable())) {
-+				kernel_fpu_begin();
-+				poly1305_simd_blocks(dctx, dctx->buf,
-+						     POLY1305_BLOCK_SIZE);
-+				kernel_fpu_end();
-+			} else {
-+				poly1305_scalar_blocks(dctx, dctx->buf,
-+						       POLY1305_BLOCK_SIZE);
-+			}
- 			dctx->buflen = 0;
- 		}
- 	}
- 
- 	if (likely(srclen >= POLY1305_BLOCK_SIZE)) {
--		bytes = poly1305_simd_blocks(dctx, src, srclen);
-+		if (likely(crypto_simd_usable())) {
-+			kernel_fpu_begin();
-+			bytes = poly1305_simd_blocks(dctx, src, srclen);
-+			kernel_fpu_end();
-+		} else {
-+			bytes = poly1305_scalar_blocks(dctx, src, srclen);
-+		}
- 		src += srclen - bytes;
- 		srclen = bytes;
- 	}
- 
--	kernel_fpu_end();
--
- 	if (unlikely(srclen)) {
- 		dctx->buflen = srclen;
- 		memcpy(dctx->buf, src, srclen);
- 	}
-+}
-+
-+static int crypto_poly1305_init(struct shash_desc *desc)
-+{
-+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-+
-+	poly1305_core_init(&dctx->h);
-+	dctx->buflen = 0;
-+	dctx->rset = 0;
-+	dctx->sset = false;
-+
-+	return 0;
-+}
-+
-+static int crypto_poly1305_final(struct shash_desc *desc, u8 *dst)
-+{
-+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-+
-+	if (unlikely(!dctx->sset))
-+		return -ENOKEY;
- 
-+	poly1305_final_generic(dctx, dst);
- 	return 0;
- }
- 
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -697,7 +697,7 @@ config CRYPTO_POLY1305
- config CRYPTO_POLY1305_X86_64
- 	tristate "Poly1305 authenticator algorithm (x86_64/SSE2/AVX2)"
- 	depends on X86 && 64BIT
--	select CRYPTO_POLY1305
-+	select CRYPTO_LIB_POLY1305_GENERIC
- 	help
- 	  Poly1305 authenticator algorithm, RFC7539.
- 
---- a/crypto/poly1305_generic.c
-+++ b/crypto/poly1305_generic.c
-@@ -19,7 +19,7 @@
- #include <linux/module.h>
- #include <asm/unaligned.h>
- 
--int crypto_poly1305_init(struct shash_desc *desc)
-+static int crypto_poly1305_init(struct shash_desc *desc)
- {
- 	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
- 
-@@ -30,7 +30,6 @@ int crypto_poly1305_init(struct shash_de
- 
- 	return 0;
- }
--EXPORT_SYMBOL_GPL(crypto_poly1305_init);
- 
- static void poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
- 			    unsigned int srclen)
-@@ -47,8 +46,8 @@ static void poly1305_blocks(struct poly1
- 			     srclen / POLY1305_BLOCK_SIZE, 1);
- }
- 
--int crypto_poly1305_update(struct shash_desc *desc,
--			   const u8 *src, unsigned int srclen)
-+static int crypto_poly1305_update(struct shash_desc *desc,
-+				  const u8 *src, unsigned int srclen)
- {
- 	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
- 	unsigned int bytes;
-@@ -80,9 +79,8 @@ int crypto_poly1305_update(struct shash_
- 
- 	return 0;
- }
--EXPORT_SYMBOL_GPL(crypto_poly1305_update);
- 
--int crypto_poly1305_final(struct shash_desc *desc, u8 *dst)
-+static int crypto_poly1305_final(struct shash_desc *desc, u8 *dst)
- {
- 	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
- 
-@@ -92,7 +90,6 @@ int crypto_poly1305_final(struct shash_d
- 	poly1305_final_generic(dctx, dst);
- 	return 0;
- }
--EXPORT_SYMBOL_GPL(crypto_poly1305_final);
- 
- static struct shash_alg poly1305_alg = {
- 	.digestsize	= POLY1305_DIGEST_SIZE,
---- a/include/crypto/internal/poly1305.h
-+++ b/include/crypto/internal/poly1305.h
-@@ -10,8 +10,6 @@
- #include <linux/types.h>
- #include <crypto/poly1305.h>
- 
--struct shash_desc;
--
- /*
-  * Poly1305 core functions.  These implement the ε-almost-∆-universal hash
-  * function underlying the Poly1305 MAC, i.e. they don't add an encrypted nonce
-@@ -28,13 +26,6 @@ void poly1305_core_blocks(struct poly130
- 			  unsigned int nblocks, u32 hibit);
- void poly1305_core_emit(const struct poly1305_state *state, void *dst);
- 
--/* Crypto API helper functions for the Poly1305 MAC */
--int crypto_poly1305_init(struct shash_desc *desc);
--
--int crypto_poly1305_update(struct shash_desc *desc,
--			   const u8 *src, unsigned int srclen);
--int crypto_poly1305_final(struct shash_desc *desc, u8 *dst);
--
- /*
-  * Poly1305 requires a unique key for each tag, which implies that we can't set
-  * it on the tfm that gets accessed by multiple users simultaneously. Instead we
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0017-crypto-x86-poly1305-expose-existing-driver-as-poly13.patch b/target/linux/generic/backport-5.4/080-wireguard-0017-crypto-x86-poly1305-expose-existing-driver-as-poly13.patch
deleted file mode 100644
index 6514987b4d..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0017-crypto-x86-poly1305-expose-existing-driver-as-poly13.patch
+++ /dev/null
@@ -1,163 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:23 +0100
-Subject: [PATCH] crypto: x86/poly1305 - expose existing driver as poly1305
- library
-
-commit f0e89bcfbb894e5844cd1bbf6b3cf7c63cb0f5ac upstream.
-
-Implement the arch init/update/final Poly1305 library routines in the
-accelerated SIMD driver for x86 so they are accessible to users of
-the Poly1305 library interface as well.
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/poly1305_glue.c | 57 ++++++++++++++++++++++++---------
- crypto/Kconfig                  |  1 +
- lib/crypto/Kconfig              |  1 +
- 3 files changed, 43 insertions(+), 16 deletions(-)
-
---- a/arch/x86/crypto/poly1305_glue.c
-+++ b/arch/x86/crypto/poly1305_glue.c
-@@ -10,6 +10,7 @@
- #include <crypto/internal/poly1305.h>
- #include <crypto/internal/simd.h>
- #include <linux/crypto.h>
-+#include <linux/jump_label.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <asm/simd.h>
-@@ -21,7 +22,8 @@ asmlinkage void poly1305_2block_sse2(u32
- asmlinkage void poly1305_4block_avx2(u32 *h, const u8 *src, const u32 *r,
- 				     unsigned int blocks, const u32 *u);
- 
--static bool poly1305_use_avx2 __ro_after_init;
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(poly1305_use_simd);
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(poly1305_use_avx2);
- 
- static void poly1305_simd_mult(u32 *a, const u32 *b)
- {
-@@ -64,7 +66,7 @@ static unsigned int poly1305_simd_blocks
- 	}
- 
- 	if (IS_ENABLED(CONFIG_AS_AVX2) &&
--	    poly1305_use_avx2 &&
-+	    static_branch_likely(&poly1305_use_avx2) &&
- 	    srclen >= POLY1305_BLOCK_SIZE * 4) {
- 		if (unlikely(dctx->rset < 4)) {
- 			if (dctx->rset < 2) {
-@@ -103,10 +105,15 @@ static unsigned int poly1305_simd_blocks
- 	return srclen;
- }
- 
--static int poly1305_simd_update(struct shash_desc *desc,
--				const u8 *src, unsigned int srclen)
-+void poly1305_init_arch(struct poly1305_desc_ctx *desc, const u8 *key)
-+{
-+	poly1305_init_generic(desc, key);
-+}
-+EXPORT_SYMBOL(poly1305_init_arch);
-+
-+void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src,
-+			  unsigned int srclen)
- {
--	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
- 	unsigned int bytes;
- 
- 	if (unlikely(dctx->buflen)) {
-@@ -117,7 +124,8 @@ static int poly1305_simd_update(struct s
- 		dctx->buflen += bytes;
- 
- 		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
--			if (likely(crypto_simd_usable())) {
-+			if (static_branch_likely(&poly1305_use_simd) &&
-+			    likely(crypto_simd_usable())) {
- 				kernel_fpu_begin();
- 				poly1305_simd_blocks(dctx, dctx->buf,
- 						     POLY1305_BLOCK_SIZE);
-@@ -131,7 +139,8 @@ static int poly1305_simd_update(struct s
- 	}
- 
- 	if (likely(srclen >= POLY1305_BLOCK_SIZE)) {
--		if (likely(crypto_simd_usable())) {
-+		if (static_branch_likely(&poly1305_use_simd) &&
-+		    likely(crypto_simd_usable())) {
- 			kernel_fpu_begin();
- 			bytes = poly1305_simd_blocks(dctx, src, srclen);
- 			kernel_fpu_end();
-@@ -147,6 +156,13 @@ static int poly1305_simd_update(struct s
- 		memcpy(dctx->buf, src, srclen);
- 	}
- }
-+EXPORT_SYMBOL(poly1305_update_arch);
-+
-+void poly1305_final_arch(struct poly1305_desc_ctx *desc, u8 *digest)
-+{
-+	poly1305_final_generic(desc, digest);
-+}
-+EXPORT_SYMBOL(poly1305_final_arch);
- 
- static int crypto_poly1305_init(struct shash_desc *desc)
- {
-@@ -171,6 +187,15 @@ static int crypto_poly1305_final(struct
- 	return 0;
- }
- 
-+static int poly1305_simd_update(struct shash_desc *desc,
-+				const u8 *src, unsigned int srclen)
-+{
-+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-+
-+	poly1305_update_arch(dctx, src, srclen);
-+	return 0;
-+}
-+
- static struct shash_alg alg = {
- 	.digestsize	= POLY1305_DIGEST_SIZE,
- 	.init		= crypto_poly1305_init,
-@@ -189,15 +214,15 @@ static struct shash_alg alg = {
- static int __init poly1305_simd_mod_init(void)
- {
- 	if (!boot_cpu_has(X86_FEATURE_XMM2))
--		return -ENODEV;
-+		return 0;
- 
--	poly1305_use_avx2 = IS_ENABLED(CONFIG_AS_AVX2) &&
--			    boot_cpu_has(X86_FEATURE_AVX) &&
--			    boot_cpu_has(X86_FEATURE_AVX2) &&
--			    cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM, NULL);
--	alg.descsize = sizeof(struct poly1305_desc_ctx) + 5 * sizeof(u32);
--	if (poly1305_use_avx2)
--		alg.descsize += 10 * sizeof(u32);
-+	static_branch_enable(&poly1305_use_simd);
-+
-+	if (IS_ENABLED(CONFIG_AS_AVX2) &&
-+	    boot_cpu_has(X86_FEATURE_AVX) &&
-+	    boot_cpu_has(X86_FEATURE_AVX2) &&
-+	    cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM, NULL))
-+		static_branch_enable(&poly1305_use_avx2);
- 
- 	return crypto_register_shash(&alg);
- }
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -698,6 +698,7 @@ config CRYPTO_POLY1305_X86_64
- 	tristate "Poly1305 authenticator algorithm (x86_64/SSE2/AVX2)"
- 	depends on X86 && 64BIT
- 	select CRYPTO_LIB_POLY1305_GENERIC
-+	select CRYPTO_ARCH_HAVE_LIB_POLY1305
- 	help
- 	  Poly1305 authenticator algorithm, RFC7539.
- 
---- a/lib/crypto/Kconfig
-+++ b/lib/crypto/Kconfig
-@@ -39,6 +39,7 @@ config CRYPTO_LIB_DES
- 
- config CRYPTO_LIB_POLY1305_RSIZE
- 	int
-+	default 4 if X86_64
- 	default 1
- 
- config CRYPTO_ARCH_HAVE_LIB_POLY1305
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0018-crypto-arm64-poly1305-incorporate-OpenSSL-CRYPTOGAMS.patch b/target/linux/generic/backport-5.4/080-wireguard-0018-crypto-arm64-poly1305-incorporate-OpenSSL-CRYPTOGAMS.patch
deleted file mode 100644
index 464c6568f6..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0018-crypto-arm64-poly1305-incorporate-OpenSSL-CRYPTOGAMS.patch
+++ /dev/null
@@ -1,2083 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:24 +0100
-Subject: [PATCH] crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON
- implementation
-
-commit f569ca16475155013525686d0f73bc379c67e635 upstream.
-
-This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation
-for NEON authored by Andy Polyakov, and contributed by him to the OpenSSL
-project. The file 'poly1305-armv8.pl' is taken straight from this upstream
-GitHub repository [0] at commit ec55a08dc0244ce570c4fc7cade330c60798952f,
-and already contains all the changes required to build it as part of a
-Linux kernel module.
-
-[0] https://github.com/dot-asm/cryptogams
-
-Co-developed-by: Andy Polyakov <appro@cryptogams.org>
-Signed-off-by: Andy Polyakov <appro@cryptogams.org>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm64/crypto/Kconfig                 |   6 +
- arch/arm64/crypto/Makefile                |  10 +-
- arch/arm64/crypto/poly1305-armv8.pl       | 913 ++++++++++++++++++++++
- arch/arm64/crypto/poly1305-core.S_shipped | 835 ++++++++++++++++++++
- arch/arm64/crypto/poly1305-glue.c         | 237 ++++++
- lib/crypto/Kconfig                        |   1 +
- 6 files changed, 2001 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm64/crypto/poly1305-armv8.pl
- create mode 100644 arch/arm64/crypto/poly1305-core.S_shipped
- create mode 100644 arch/arm64/crypto/poly1305-glue.c
-
---- a/arch/arm64/crypto/Kconfig
-+++ b/arch/arm64/crypto/Kconfig
-@@ -106,6 +106,12 @@ config CRYPTO_CHACHA20_NEON
- 	select CRYPTO_LIB_CHACHA_GENERIC
- 	select CRYPTO_ARCH_HAVE_LIB_CHACHA
- 
-+config CRYPTO_POLY1305_NEON
-+	tristate "Poly1305 hash function using scalar or NEON instructions"
-+	depends on KERNEL_MODE_NEON
-+	select CRYPTO_HASH
-+	select CRYPTO_ARCH_HAVE_LIB_POLY1305
-+
- config CRYPTO_NHPOLY1305_NEON
- 	tristate "NHPoly1305 hash function using NEON instructions (for Adiantum)"
- 	depends on KERNEL_MODE_NEON
---- a/arch/arm64/crypto/Makefile
-+++ b/arch/arm64/crypto/Makefile
-@@ -50,6 +50,10 @@ sha512-arm64-y := sha512-glue.o sha512-c
- obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
- chacha-neon-y := chacha-neon-core.o chacha-neon-glue.o
- 
-+obj-$(CONFIG_CRYPTO_POLY1305_NEON) += poly1305-neon.o
-+poly1305-neon-y := poly1305-core.o poly1305-glue.o
-+AFLAGS_poly1305-core.o += -Dpoly1305_init=poly1305_init_arm64
-+
- obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o
- nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o
- 
-@@ -68,11 +72,15 @@ ifdef REGENERATE_ARM64_CRYPTO
- quiet_cmd_perlasm = PERLASM $@
-       cmd_perlasm = $(PERL) $(<) void $(@)
- 
-+$(src)/poly1305-core.S_shipped: $(src)/poly1305-armv8.pl
-+	$(call cmd,perlasm)
-+
- $(src)/sha256-core.S_shipped: $(src)/sha512-armv8.pl
- 	$(call cmd,perlasm)
- 
- $(src)/sha512-core.S_shipped: $(src)/sha512-armv8.pl
- 	$(call cmd,perlasm)
-+
- endif
- 
--clean-files += sha256-core.S sha512-core.S
-+clean-files += poly1305-core.S sha256-core.S sha512-core.S
---- /dev/null
-+++ b/arch/arm64/crypto/poly1305-armv8.pl
-@@ -0,0 +1,913 @@
-+#!/usr/bin/env perl
-+# SPDX-License-Identifier: GPL-1.0+ OR BSD-3-Clause
-+#
-+# ====================================================================
-+# Written by Andy Polyakov, @dot-asm, initially for the OpenSSL
-+# project.
-+# ====================================================================
-+#
-+# This module implements Poly1305 hash for ARMv8.
-+#
-+# June 2015
-+#
-+# Numbers are cycles per processed byte with poly1305_blocks alone.
-+#
-+#		IALU/gcc-4.9	NEON
-+#
-+# Apple A7	1.86/+5%	0.72
-+# Cortex-A53	2.69/+58%	1.47
-+# Cortex-A57	2.70/+7%	1.14
-+# Denver	1.64/+50%	1.18(*)
-+# X-Gene	2.13/+68%	2.27
-+# Mongoose	1.77/+75%	1.12
-+# Kryo		2.70/+55%	1.13
-+# ThunderX2	1.17/+95%	1.36
-+#
-+# (*)	estimate based on resources availability is less than 1.0,
-+#	i.e. measured result is worse than expected, presumably binary
-+#	translator is not almighty;
-+
-+$flavour=shift;
-+$output=shift;
-+
-+if ($flavour && $flavour ne "void") {
-+    $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-+    ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
-+    ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
-+    die "can't locate arm-xlate.pl";
-+
-+    open STDOUT,"| \"$^X\" $xlate $flavour $output";
-+} else {
-+    open STDOUT,">$output";
-+}
-+
-+my ($ctx,$inp,$len,$padbit) = map("x$_",(0..3));
-+my ($mac,$nonce)=($inp,$len);
-+
-+my ($h0,$h1,$h2,$r0,$r1,$s1,$t0,$t1,$d0,$d1,$d2) = map("x$_",(4..14));
-+
-+$code.=<<___;
-+#ifndef __KERNEL__
-+# include "arm_arch.h"
-+.extern	OPENSSL_armcap_P
-+#endif
-+
-+.text
-+
-+// forward "declarations" are required for Apple
-+.globl	poly1305_blocks
-+.globl	poly1305_emit
-+
-+.globl	poly1305_init
-+.type	poly1305_init,%function
-+.align	5
-+poly1305_init:
-+	cmp	$inp,xzr
-+	stp	xzr,xzr,[$ctx]		// zero hash value
-+	stp	xzr,xzr,[$ctx,#16]	// [along with is_base2_26]
-+
-+	csel	x0,xzr,x0,eq
-+	b.eq	.Lno_key
-+
-+#ifndef	__KERNEL__
-+	adrp	x17,OPENSSL_armcap_P
-+	ldr	w17,[x17,#:lo12:OPENSSL_armcap_P]
-+#endif
-+
-+	ldp	$r0,$r1,[$inp]		// load key
-+	mov	$s1,#0xfffffffc0fffffff
-+	movk	$s1,#0x0fff,lsl#48
-+#ifdef	__AARCH64EB__
-+	rev	$r0,$r0			// flip bytes
-+	rev	$r1,$r1
-+#endif
-+	and	$r0,$r0,$s1		// &=0ffffffc0fffffff
-+	and	$s1,$s1,#-4
-+	and	$r1,$r1,$s1		// &=0ffffffc0ffffffc
-+	mov	w#$s1,#-1
-+	stp	$r0,$r1,[$ctx,#32]	// save key value
-+	str	w#$s1,[$ctx,#48]	// impossible key power value
-+
-+#ifndef	__KERNEL__
-+	tst	w17,#ARMV7_NEON
-+
-+	adr	$d0,.Lpoly1305_blocks
-+	adr	$r0,.Lpoly1305_blocks_neon
-+	adr	$d1,.Lpoly1305_emit
-+
-+	csel	$d0,$d0,$r0,eq
-+
-+# ifdef	__ILP32__
-+	stp	w#$d0,w#$d1,[$len]
-+# else
-+	stp	$d0,$d1,[$len]
-+# endif
-+#endif
-+	mov	x0,#1
-+.Lno_key:
-+	ret
-+.size	poly1305_init,.-poly1305_init
-+
-+.type	poly1305_blocks,%function
-+.align	5
-+poly1305_blocks:
-+.Lpoly1305_blocks:
-+	ands	$len,$len,#-16
-+	b.eq	.Lno_data
-+
-+	ldp	$h0,$h1,[$ctx]		// load hash value
-+	ldp	$h2,x17,[$ctx,#16]	// [along with is_base2_26]
-+	ldp	$r0,$r1,[$ctx,#32]	// load key value
-+
-+#ifdef	__AARCH64EB__
-+	lsr	$d0,$h0,#32
-+	mov	w#$d1,w#$h0
-+	lsr	$d2,$h1,#32
-+	mov	w15,w#$h1
-+	lsr	x16,$h2,#32
-+#else
-+	mov	w#$d0,w#$h0
-+	lsr	$d1,$h0,#32
-+	mov	w#$d2,w#$h1
-+	lsr	x15,$h1,#32
-+	mov	w16,w#$h2
-+#endif
-+
-+	add	$d0,$d0,$d1,lsl#26	// base 2^26 -> base 2^64
-+	lsr	$d1,$d2,#12
-+	adds	$d0,$d0,$d2,lsl#52
-+	add	$d1,$d1,x15,lsl#14
-+	adc	$d1,$d1,xzr
-+	lsr	$d2,x16,#24
-+	adds	$d1,$d1,x16,lsl#40
-+	adc	$d2,$d2,xzr
-+
-+	cmp	x17,#0			// is_base2_26?
-+	add	$s1,$r1,$r1,lsr#2	// s1 = r1 + (r1 >> 2)
-+	csel	$h0,$h0,$d0,eq		// choose between radixes
-+	csel	$h1,$h1,$d1,eq
-+	csel	$h2,$h2,$d2,eq
-+
-+.Loop:
-+	ldp	$t0,$t1,[$inp],#16	// load input
-+	sub	$len,$len,#16
-+#ifdef	__AARCH64EB__
-+	rev	$t0,$t0
-+	rev	$t1,$t1
-+#endif
-+	adds	$h0,$h0,$t0		// accumulate input
-+	adcs	$h1,$h1,$t1
-+
-+	mul	$d0,$h0,$r0		// h0*r0
-+	adc	$h2,$h2,$padbit
-+	umulh	$d1,$h0,$r0
-+
-+	mul	$t0,$h1,$s1		// h1*5*r1
-+	umulh	$t1,$h1,$s1
-+
-+	adds	$d0,$d0,$t0
-+	mul	$t0,$h0,$r1		// h0*r1
-+	adc	$d1,$d1,$t1
-+	umulh	$d2,$h0,$r1
-+
-+	adds	$d1,$d1,$t0
-+	mul	$t0,$h1,$r0		// h1*r0
-+	adc	$d2,$d2,xzr
-+	umulh	$t1,$h1,$r0
-+
-+	adds	$d1,$d1,$t0
-+	mul	$t0,$h2,$s1		// h2*5*r1
-+	adc	$d2,$d2,$t1
-+	mul	$t1,$h2,$r0		// h2*r0
-+
-+	adds	$d1,$d1,$t0
-+	adc	$d2,$d2,$t1
-+
-+	and	$t0,$d2,#-4		// final reduction
-+	and	$h2,$d2,#3
-+	add	$t0,$t0,$d2,lsr#2
-+	adds	$h0,$d0,$t0
-+	adcs	$h1,$d1,xzr
-+	adc	$h2,$h2,xzr
-+
-+	cbnz	$len,.Loop
-+
-+	stp	$h0,$h1,[$ctx]		// store hash value
-+	stp	$h2,xzr,[$ctx,#16]	// [and clear is_base2_26]
-+
-+.Lno_data:
-+	ret
-+.size	poly1305_blocks,.-poly1305_blocks
-+
-+.type	poly1305_emit,%function
-+.align	5
-+poly1305_emit:
-+.Lpoly1305_emit:
-+	ldp	$h0,$h1,[$ctx]		// load hash base 2^64
-+	ldp	$h2,$r0,[$ctx,#16]	// [along with is_base2_26]
-+	ldp	$t0,$t1,[$nonce]	// load nonce
-+
-+#ifdef	__AARCH64EB__
-+	lsr	$d0,$h0,#32
-+	mov	w#$d1,w#$h0
-+	lsr	$d2,$h1,#32
-+	mov	w15,w#$h1
-+	lsr	x16,$h2,#32
-+#else
-+	mov	w#$d0,w#$h0
-+	lsr	$d1,$h0,#32
-+	mov	w#$d2,w#$h1
-+	lsr	x15,$h1,#32
-+	mov	w16,w#$h2
-+#endif
-+
-+	add	$d0,$d0,$d1,lsl#26	// base 2^26 -> base 2^64
-+	lsr	$d1,$d2,#12
-+	adds	$d0,$d0,$d2,lsl#52
-+	add	$d1,$d1,x15,lsl#14
-+	adc	$d1,$d1,xzr
-+	lsr	$d2,x16,#24
-+	adds	$d1,$d1,x16,lsl#40
-+	adc	$d2,$d2,xzr
-+
-+	cmp	$r0,#0			// is_base2_26?
-+	csel	$h0,$h0,$d0,eq		// choose between radixes
-+	csel	$h1,$h1,$d1,eq
-+	csel	$h2,$h2,$d2,eq
-+
-+	adds	$d0,$h0,#5		// compare to modulus
-+	adcs	$d1,$h1,xzr
-+	adc	$d2,$h2,xzr
-+
-+	tst	$d2,#-4			// see if it's carried/borrowed
-+
-+	csel	$h0,$h0,$d0,eq
-+	csel	$h1,$h1,$d1,eq
-+
-+#ifdef	__AARCH64EB__
-+	ror	$t0,$t0,#32		// flip nonce words
-+	ror	$t1,$t1,#32
-+#endif
-+	adds	$h0,$h0,$t0		// accumulate nonce
-+	adc	$h1,$h1,$t1
-+#ifdef	__AARCH64EB__
-+	rev	$h0,$h0			// flip output bytes
-+	rev	$h1,$h1
-+#endif
-+	stp	$h0,$h1,[$mac]		// write result
-+
-+	ret
-+.size	poly1305_emit,.-poly1305_emit
-+___
-+my ($R0,$R1,$S1,$R2,$S2,$R3,$S3,$R4,$S4) = map("v$_.4s",(0..8));
-+my ($IN01_0,$IN01_1,$IN01_2,$IN01_3,$IN01_4) = map("v$_.2s",(9..13));
-+my ($IN23_0,$IN23_1,$IN23_2,$IN23_3,$IN23_4) = map("v$_.2s",(14..18));
-+my ($ACC0,$ACC1,$ACC2,$ACC3,$ACC4) = map("v$_.2d",(19..23));
-+my ($H0,$H1,$H2,$H3,$H4) = map("v$_.2s",(24..28));
-+my ($T0,$T1,$MASK) = map("v$_",(29..31));
-+
-+my ($in2,$zeros)=("x16","x17");
-+my $is_base2_26 = $zeros;		# borrow
-+
-+$code.=<<___;
-+.type	poly1305_mult,%function
-+.align	5
-+poly1305_mult:
-+	mul	$d0,$h0,$r0		// h0*r0
-+	umulh	$d1,$h0,$r0
-+
-+	mul	$t0,$h1,$s1		// h1*5*r1
-+	umulh	$t1,$h1,$s1
-+
-+	adds	$d0,$d0,$t0
-+	mul	$t0,$h0,$r1		// h0*r1
-+	adc	$d1,$d1,$t1
-+	umulh	$d2,$h0,$r1
-+
-+	adds	$d1,$d1,$t0
-+	mul	$t0,$h1,$r0		// h1*r0
-+	adc	$d2,$d2,xzr
-+	umulh	$t1,$h1,$r0
-+
-+	adds	$d1,$d1,$t0
-+	mul	$t0,$h2,$s1		// h2*5*r1
-+	adc	$d2,$d2,$t1
-+	mul	$t1,$h2,$r0		// h2*r0
-+
-+	adds	$d1,$d1,$t0
-+	adc	$d2,$d2,$t1
-+
-+	and	$t0,$d2,#-4		// final reduction
-+	and	$h2,$d2,#3
-+	add	$t0,$t0,$d2,lsr#2
-+	adds	$h0,$d0,$t0
-+	adcs	$h1,$d1,xzr
-+	adc	$h2,$h2,xzr
-+
-+	ret
-+.size	poly1305_mult,.-poly1305_mult
-+
-+.type	poly1305_splat,%function
-+.align	4
-+poly1305_splat:
-+	and	x12,$h0,#0x03ffffff	// base 2^64 -> base 2^26
-+	ubfx	x13,$h0,#26,#26
-+	extr	x14,$h1,$h0,#52
-+	and	x14,x14,#0x03ffffff
-+	ubfx	x15,$h1,#14,#26
-+	extr	x16,$h2,$h1,#40
-+
-+	str	w12,[$ctx,#16*0]	// r0
-+	add	w12,w13,w13,lsl#2	// r1*5
-+	str	w13,[$ctx,#16*1]	// r1
-+	add	w13,w14,w14,lsl#2	// r2*5
-+	str	w12,[$ctx,#16*2]	// s1
-+	str	w14,[$ctx,#16*3]	// r2
-+	add	w14,w15,w15,lsl#2	// r3*5
-+	str	w13,[$ctx,#16*4]	// s2
-+	str	w15,[$ctx,#16*5]	// r3
-+	add	w15,w16,w16,lsl#2	// r4*5
-+	str	w14,[$ctx,#16*6]	// s3
-+	str	w16,[$ctx,#16*7]	// r4
-+	str	w15,[$ctx,#16*8]	// s4
-+
-+	ret
-+.size	poly1305_splat,.-poly1305_splat
-+
-+#ifdef	__KERNEL__
-+.globl	poly1305_blocks_neon
-+#endif
-+.type	poly1305_blocks_neon,%function
-+.align	5
-+poly1305_blocks_neon:
-+.Lpoly1305_blocks_neon:
-+	ldr	$is_base2_26,[$ctx,#24]
-+	cmp	$len,#128
-+	b.lo	.Lpoly1305_blocks
-+
-+	.inst	0xd503233f		// paciasp
-+	stp	x29,x30,[sp,#-80]!
-+	add	x29,sp,#0
-+
-+	stp	d8,d9,[sp,#16]		// meet ABI requirements
-+	stp	d10,d11,[sp,#32]
-+	stp	d12,d13,[sp,#48]
-+	stp	d14,d15,[sp,#64]
-+
-+	cbz	$is_base2_26,.Lbase2_64_neon
-+
-+	ldp	w10,w11,[$ctx]		// load hash value base 2^26
-+	ldp	w12,w13,[$ctx,#8]
-+	ldr	w14,[$ctx,#16]
-+
-+	tst	$len,#31
-+	b.eq	.Leven_neon
-+
-+	ldp	$r0,$r1,[$ctx,#32]	// load key value
-+
-+	add	$h0,x10,x11,lsl#26	// base 2^26 -> base 2^64
-+	lsr	$h1,x12,#12
-+	adds	$h0,$h0,x12,lsl#52
-+	add	$h1,$h1,x13,lsl#14
-+	adc	$h1,$h1,xzr
-+	lsr	$h2,x14,#24
-+	adds	$h1,$h1,x14,lsl#40
-+	adc	$d2,$h2,xzr		// can be partially reduced...
-+
-+	ldp	$d0,$d1,[$inp],#16	// load input
-+	sub	$len,$len,#16
-+	add	$s1,$r1,$r1,lsr#2	// s1 = r1 + (r1 >> 2)
-+
-+#ifdef	__AARCH64EB__
-+	rev	$d0,$d0
-+	rev	$d1,$d1
-+#endif
-+	adds	$h0,$h0,$d0		// accumulate input
-+	adcs	$h1,$h1,$d1
-+	adc	$h2,$h2,$padbit
-+
-+	bl	poly1305_mult
-+
-+	and	x10,$h0,#0x03ffffff	// base 2^64 -> base 2^26
-+	ubfx	x11,$h0,#26,#26
-+	extr	x12,$h1,$h0,#52
-+	and	x12,x12,#0x03ffffff
-+	ubfx	x13,$h1,#14,#26
-+	extr	x14,$h2,$h1,#40
-+
-+	b	.Leven_neon
-+
-+.align	4
-+.Lbase2_64_neon:
-+	ldp	$r0,$r1,[$ctx,#32]	// load key value
-+
-+	ldp	$h0,$h1,[$ctx]		// load hash value base 2^64
-+	ldr	$h2,[$ctx,#16]
-+
-+	tst	$len,#31
-+	b.eq	.Linit_neon
-+
-+	ldp	$d0,$d1,[$inp],#16	// load input
-+	sub	$len,$len,#16
-+	add	$s1,$r1,$r1,lsr#2	// s1 = r1 + (r1 >> 2)
-+#ifdef	__AARCH64EB__
-+	rev	$d0,$d0
-+	rev	$d1,$d1
-+#endif
-+	adds	$h0,$h0,$d0		// accumulate input
-+	adcs	$h1,$h1,$d1
-+	adc	$h2,$h2,$padbit
-+
-+	bl	poly1305_mult
-+
-+.Linit_neon:
-+	ldr	w17,[$ctx,#48]		// first table element
-+	and	x10,$h0,#0x03ffffff	// base 2^64 -> base 2^26
-+	ubfx	x11,$h0,#26,#26
-+	extr	x12,$h1,$h0,#52
-+	and	x12,x12,#0x03ffffff
-+	ubfx	x13,$h1,#14,#26
-+	extr	x14,$h2,$h1,#40
-+
-+	cmp	w17,#-1			// is value impossible?
-+	b.ne	.Leven_neon
-+
-+	fmov	${H0},x10
-+	fmov	${H1},x11
-+	fmov	${H2},x12
-+	fmov	${H3},x13
-+	fmov	${H4},x14
-+
-+	////////////////////////////////// initialize r^n table
-+	mov	$h0,$r0			// r^1
-+	add	$s1,$r1,$r1,lsr#2	// s1 = r1 + (r1 >> 2)
-+	mov	$h1,$r1
-+	mov	$h2,xzr
-+	add	$ctx,$ctx,#48+12
-+	bl	poly1305_splat
-+
-+	bl	poly1305_mult		// r^2
-+	sub	$ctx,$ctx,#4
-+	bl	poly1305_splat
-+
-+	bl	poly1305_mult		// r^3
-+	sub	$ctx,$ctx,#4
-+	bl	poly1305_splat
-+
-+	bl	poly1305_mult		// r^4
-+	sub	$ctx,$ctx,#4
-+	bl	poly1305_splat
-+	sub	$ctx,$ctx,#48		// restore original $ctx
-+	b	.Ldo_neon
-+
-+.align	4
-+.Leven_neon:
-+	fmov	${H0},x10
-+	fmov	${H1},x11
-+	fmov	${H2},x12
-+	fmov	${H3},x13
-+	fmov	${H4},x14
-+
-+.Ldo_neon:
-+	ldp	x8,x12,[$inp,#32]	// inp[2:3]
-+	subs	$len,$len,#64
-+	ldp	x9,x13,[$inp,#48]
-+	add	$in2,$inp,#96
-+	adr	$zeros,.Lzeros
-+
-+	lsl	$padbit,$padbit,#24
-+	add	x15,$ctx,#48
-+
-+#ifdef	__AARCH64EB__
-+	rev	x8,x8
-+	rev	x12,x12
-+	rev	x9,x9
-+	rev	x13,x13
-+#endif
-+	and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
-+	and	x5,x9,#0x03ffffff
-+	ubfx	x6,x8,#26,#26
-+	ubfx	x7,x9,#26,#26
-+	add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
-+	extr	x8,x12,x8,#52
-+	extr	x9,x13,x9,#52
-+	add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
-+	fmov	$IN23_0,x4
-+	and	x8,x8,#0x03ffffff
-+	and	x9,x9,#0x03ffffff
-+	ubfx	x10,x12,#14,#26
-+	ubfx	x11,x13,#14,#26
-+	add	x12,$padbit,x12,lsr#40
-+	add	x13,$padbit,x13,lsr#40
-+	add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
-+	fmov	$IN23_1,x6
-+	add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
-+	add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
-+	fmov	$IN23_2,x8
-+	fmov	$IN23_3,x10
-+	fmov	$IN23_4,x12
-+
-+	ldp	x8,x12,[$inp],#16	// inp[0:1]
-+	ldp	x9,x13,[$inp],#48
-+
-+	ld1	{$R0,$R1,$S1,$R2},[x15],#64
-+	ld1	{$S2,$R3,$S3,$R4},[x15],#64
-+	ld1	{$S4},[x15]
-+
-+#ifdef	__AARCH64EB__
-+	rev	x8,x8
-+	rev	x12,x12
-+	rev	x9,x9
-+	rev	x13,x13
-+#endif
-+	and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
-+	and	x5,x9,#0x03ffffff
-+	ubfx	x6,x8,#26,#26
-+	ubfx	x7,x9,#26,#26
-+	add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
-+	extr	x8,x12,x8,#52
-+	extr	x9,x13,x9,#52
-+	add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
-+	fmov	$IN01_0,x4
-+	and	x8,x8,#0x03ffffff
-+	and	x9,x9,#0x03ffffff
-+	ubfx	x10,x12,#14,#26
-+	ubfx	x11,x13,#14,#26
-+	add	x12,$padbit,x12,lsr#40
-+	add	x13,$padbit,x13,lsr#40
-+	add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
-+	fmov	$IN01_1,x6
-+	add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
-+	add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
-+	movi	$MASK.2d,#-1
-+	fmov	$IN01_2,x8
-+	fmov	$IN01_3,x10
-+	fmov	$IN01_4,x12
-+	ushr	$MASK.2d,$MASK.2d,#38
-+
-+	b.ls	.Lskip_loop
-+
-+.align	4
-+.Loop_neon:
-+	////////////////////////////////////////////////////////////////
-+	// ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2
-+	// ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r
-+	//   \___________________/
-+	// ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2
-+	// ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r
-+	//   \___________________/ \____________________/
-+	//
-+	// Note that we start with inp[2:3]*r^2. This is because it
-+	// doesn't depend on reduction in previous iteration.
-+	////////////////////////////////////////////////////////////////
-+	// d4 = h0*r4 + h1*r3   + h2*r2   + h3*r1   + h4*r0
-+	// d3 = h0*r3 + h1*r2   + h2*r1   + h3*r0   + h4*5*r4
-+	// d2 = h0*r2 + h1*r1   + h2*r0   + h3*5*r4 + h4*5*r3
-+	// d1 = h0*r1 + h1*r0   + h2*5*r4 + h3*5*r3 + h4*5*r2
-+	// d0 = h0*r0 + h1*5*r4 + h2*5*r3 + h3*5*r2 + h4*5*r1
-+
-+	subs	$len,$len,#64
-+	umull	$ACC4,$IN23_0,${R4}[2]
-+	csel	$in2,$zeros,$in2,lo
-+	umull	$ACC3,$IN23_0,${R3}[2]
-+	umull	$ACC2,$IN23_0,${R2}[2]
-+	 ldp	x8,x12,[$in2],#16	// inp[2:3] (or zero)
-+	umull	$ACC1,$IN23_0,${R1}[2]
-+	 ldp	x9,x13,[$in2],#48
-+	umull	$ACC0,$IN23_0,${R0}[2]
-+#ifdef	__AARCH64EB__
-+	 rev	x8,x8
-+	 rev	x12,x12
-+	 rev	x9,x9
-+	 rev	x13,x13
-+#endif
-+
-+	umlal	$ACC4,$IN23_1,${R3}[2]
-+	 and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
-+	umlal	$ACC3,$IN23_1,${R2}[2]
-+	 and	x5,x9,#0x03ffffff
-+	umlal	$ACC2,$IN23_1,${R1}[2]
-+	 ubfx	x6,x8,#26,#26
-+	umlal	$ACC1,$IN23_1,${R0}[2]
-+	 ubfx	x7,x9,#26,#26
-+	umlal	$ACC0,$IN23_1,${S4}[2]
-+	 add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
-+
-+	umlal	$ACC4,$IN23_2,${R2}[2]
-+	 extr	x8,x12,x8,#52
-+	umlal	$ACC3,$IN23_2,${R1}[2]
-+	 extr	x9,x13,x9,#52
-+	umlal	$ACC2,$IN23_2,${R0}[2]
-+	 add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
-+	umlal	$ACC1,$IN23_2,${S4}[2]
-+	 fmov	$IN23_0,x4
-+	umlal	$ACC0,$IN23_2,${S3}[2]
-+	 and	x8,x8,#0x03ffffff
-+
-+	umlal	$ACC4,$IN23_3,${R1}[2]
-+	 and	x9,x9,#0x03ffffff
-+	umlal	$ACC3,$IN23_3,${R0}[2]
-+	 ubfx	x10,x12,#14,#26
-+	umlal	$ACC2,$IN23_3,${S4}[2]
-+	 ubfx	x11,x13,#14,#26
-+	umlal	$ACC1,$IN23_3,${S3}[2]
-+	 add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
-+	umlal	$ACC0,$IN23_3,${S2}[2]
-+	 fmov	$IN23_1,x6
-+
-+	add	$IN01_2,$IN01_2,$H2
-+	 add	x12,$padbit,x12,lsr#40
-+	umlal	$ACC4,$IN23_4,${R0}[2]
-+	 add	x13,$padbit,x13,lsr#40
-+	umlal	$ACC3,$IN23_4,${S4}[2]
-+	 add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
-+	umlal	$ACC2,$IN23_4,${S3}[2]
-+	 add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
-+	umlal	$ACC1,$IN23_4,${S2}[2]
-+	 fmov	$IN23_2,x8
-+	umlal	$ACC0,$IN23_4,${S1}[2]
-+	 fmov	$IN23_3,x10
-+
-+	////////////////////////////////////////////////////////////////
-+	// (hash+inp[0:1])*r^4 and accumulate
-+
-+	add	$IN01_0,$IN01_0,$H0
-+	 fmov	$IN23_4,x12
-+	umlal	$ACC3,$IN01_2,${R1}[0]
-+	 ldp	x8,x12,[$inp],#16	// inp[0:1]
-+	umlal	$ACC0,$IN01_2,${S3}[0]
-+	 ldp	x9,x13,[$inp],#48
-+	umlal	$ACC4,$IN01_2,${R2}[0]
-+	umlal	$ACC1,$IN01_2,${S4}[0]
-+	umlal	$ACC2,$IN01_2,${R0}[0]
-+#ifdef	__AARCH64EB__
-+	 rev	x8,x8
-+	 rev	x12,x12
-+	 rev	x9,x9
-+	 rev	x13,x13
-+#endif
-+
-+	add	$IN01_1,$IN01_1,$H1
-+	umlal	$ACC3,$IN01_0,${R3}[0]
-+	umlal	$ACC4,$IN01_0,${R4}[0]
-+	 and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
-+	umlal	$ACC2,$IN01_0,${R2}[0]
-+	 and	x5,x9,#0x03ffffff
-+	umlal	$ACC0,$IN01_0,${R0}[0]
-+	 ubfx	x6,x8,#26,#26
-+	umlal	$ACC1,$IN01_0,${R1}[0]
-+	 ubfx	x7,x9,#26,#26
-+
-+	add	$IN01_3,$IN01_3,$H3
-+	 add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
-+	umlal	$ACC3,$IN01_1,${R2}[0]
-+	 extr	x8,x12,x8,#52
-+	umlal	$ACC4,$IN01_1,${R3}[0]
-+	 extr	x9,x13,x9,#52
-+	umlal	$ACC0,$IN01_1,${S4}[0]
-+	 add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
-+	umlal	$ACC2,$IN01_1,${R1}[0]
-+	 fmov	$IN01_0,x4
-+	umlal	$ACC1,$IN01_1,${R0}[0]
-+	 and	x8,x8,#0x03ffffff
-+
-+	add	$IN01_4,$IN01_4,$H4
-+	 and	x9,x9,#0x03ffffff
-+	umlal	$ACC3,$IN01_3,${R0}[0]
-+	 ubfx	x10,x12,#14,#26
-+	umlal	$ACC0,$IN01_3,${S2}[0]
-+	 ubfx	x11,x13,#14,#26
-+	umlal	$ACC4,$IN01_3,${R1}[0]
-+	 add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
-+	umlal	$ACC1,$IN01_3,${S3}[0]
-+	 fmov	$IN01_1,x6
-+	umlal	$ACC2,$IN01_3,${S4}[0]
-+	 add	x12,$padbit,x12,lsr#40
-+
-+	umlal	$ACC3,$IN01_4,${S4}[0]
-+	 add	x13,$padbit,x13,lsr#40
-+	umlal	$ACC0,$IN01_4,${S1}[0]
-+	 add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
-+	umlal	$ACC4,$IN01_4,${R0}[0]
-+	 add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
-+	umlal	$ACC1,$IN01_4,${S2}[0]
-+	 fmov	$IN01_2,x8
-+	umlal	$ACC2,$IN01_4,${S3}[0]
-+	 fmov	$IN01_3,x10
-+	 fmov	$IN01_4,x12
-+
-+	/////////////////////////////////////////////////////////////////
-+	// lazy reduction as discussed in "NEON crypto" by D.J. Bernstein
-+	// and P. Schwabe
-+	//
-+	// [see discussion in poly1305-armv4 module]
-+
-+	ushr	$T0.2d,$ACC3,#26
-+	xtn	$H3,$ACC3
-+	 ushr	$T1.2d,$ACC0,#26
-+	 and	$ACC0,$ACC0,$MASK.2d
-+	add	$ACC4,$ACC4,$T0.2d	// h3 -> h4
-+	bic	$H3,#0xfc,lsl#24	// &=0x03ffffff
-+	 add	$ACC1,$ACC1,$T1.2d	// h0 -> h1
-+
-+	ushr	$T0.2d,$ACC4,#26
-+	xtn	$H4,$ACC4
-+	 ushr	$T1.2d,$ACC1,#26
-+	 xtn	$H1,$ACC1
-+	bic	$H4,#0xfc,lsl#24
-+	 add	$ACC2,$ACC2,$T1.2d	// h1 -> h2
-+
-+	add	$ACC0,$ACC0,$T0.2d
-+	shl	$T0.2d,$T0.2d,#2
-+	 shrn	$T1.2s,$ACC2,#26
-+	 xtn	$H2,$ACC2
-+	add	$ACC0,$ACC0,$T0.2d	// h4 -> h0
-+	 bic	$H1,#0xfc,lsl#24
-+	 add	$H3,$H3,$T1.2s		// h2 -> h3
-+	 bic	$H2,#0xfc,lsl#24
-+
-+	shrn	$T0.2s,$ACC0,#26
-+	xtn	$H0,$ACC0
-+	 ushr	$T1.2s,$H3,#26
-+	 bic	$H3,#0xfc,lsl#24
-+	 bic	$H0,#0xfc,lsl#24
-+	add	$H1,$H1,$T0.2s		// h0 -> h1
-+	 add	$H4,$H4,$T1.2s		// h3 -> h4
-+
-+	b.hi	.Loop_neon
-+
-+.Lskip_loop:
-+	dup	$IN23_2,${IN23_2}[0]
-+	add	$IN01_2,$IN01_2,$H2
-+
-+	////////////////////////////////////////////////////////////////
-+	// multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1
-+
-+	adds	$len,$len,#32
-+	b.ne	.Long_tail
-+
-+	dup	$IN23_2,${IN01_2}[0]
-+	add	$IN23_0,$IN01_0,$H0
-+	add	$IN23_3,$IN01_3,$H3
-+	add	$IN23_1,$IN01_1,$H1
-+	add	$IN23_4,$IN01_4,$H4
-+
-+.Long_tail:
-+	dup	$IN23_0,${IN23_0}[0]
-+	umull2	$ACC0,$IN23_2,${S3}
-+	umull2	$ACC3,$IN23_2,${R1}
-+	umull2	$ACC4,$IN23_2,${R2}
-+	umull2	$ACC2,$IN23_2,${R0}
-+	umull2	$ACC1,$IN23_2,${S4}
-+
-+	dup	$IN23_1,${IN23_1}[0]
-+	umlal2	$ACC0,$IN23_0,${R0}
-+	umlal2	$ACC2,$IN23_0,${R2}
-+	umlal2	$ACC3,$IN23_0,${R3}
-+	umlal2	$ACC4,$IN23_0,${R4}
-+	umlal2	$ACC1,$IN23_0,${R1}
-+
-+	dup	$IN23_3,${IN23_3}[0]
-+	umlal2	$ACC0,$IN23_1,${S4}
-+	umlal2	$ACC3,$IN23_1,${R2}
-+	umlal2	$ACC2,$IN23_1,${R1}
-+	umlal2	$ACC4,$IN23_1,${R3}
-+	umlal2	$ACC1,$IN23_1,${R0}
-+
-+	dup	$IN23_4,${IN23_4}[0]
-+	umlal2	$ACC3,$IN23_3,${R0}
-+	umlal2	$ACC4,$IN23_3,${R1}
-+	umlal2	$ACC0,$IN23_3,${S2}
-+	umlal2	$ACC1,$IN23_3,${S3}
-+	umlal2	$ACC2,$IN23_3,${S4}
-+
-+	umlal2	$ACC3,$IN23_4,${S4}
-+	umlal2	$ACC0,$IN23_4,${S1}
-+	umlal2	$ACC4,$IN23_4,${R0}
-+	umlal2	$ACC1,$IN23_4,${S2}
-+	umlal2	$ACC2,$IN23_4,${S3}
-+
-+	b.eq	.Lshort_tail
-+
-+	////////////////////////////////////////////////////////////////
-+	// (hash+inp[0:1])*r^4:r^3 and accumulate
-+
-+	add	$IN01_0,$IN01_0,$H0
-+	umlal	$ACC3,$IN01_2,${R1}
-+	umlal	$ACC0,$IN01_2,${S3}
-+	umlal	$ACC4,$IN01_2,${R2}
-+	umlal	$ACC1,$IN01_2,${S4}
-+	umlal	$ACC2,$IN01_2,${R0}
-+
-+	add	$IN01_1,$IN01_1,$H1
-+	umlal	$ACC3,$IN01_0,${R3}
-+	umlal	$ACC0,$IN01_0,${R0}
-+	umlal	$ACC4,$IN01_0,${R4}
-+	umlal	$ACC1,$IN01_0,${R1}
-+	umlal	$ACC2,$IN01_0,${R2}
-+
-+	add	$IN01_3,$IN01_3,$H3
-+	umlal	$ACC3,$IN01_1,${R2}
-+	umlal	$ACC0,$IN01_1,${S4}
-+	umlal	$ACC4,$IN01_1,${R3}
-+	umlal	$ACC1,$IN01_1,${R0}
-+	umlal	$ACC2,$IN01_1,${R1}
-+
-+	add	$IN01_4,$IN01_4,$H4
-+	umlal	$ACC3,$IN01_3,${R0}
-+	umlal	$ACC0,$IN01_3,${S2}
-+	umlal	$ACC4,$IN01_3,${R1}
-+	umlal	$ACC1,$IN01_3,${S3}
-+	umlal	$ACC2,$IN01_3,${S4}
-+
-+	umlal	$ACC3,$IN01_4,${S4}
-+	umlal	$ACC0,$IN01_4,${S1}
-+	umlal	$ACC4,$IN01_4,${R0}
-+	umlal	$ACC1,$IN01_4,${S2}
-+	umlal	$ACC2,$IN01_4,${S3}
-+
-+.Lshort_tail:
-+	////////////////////////////////////////////////////////////////
-+	// horizontal add
-+
-+	addp	$ACC3,$ACC3,$ACC3
-+	 ldp	d8,d9,[sp,#16]		// meet ABI requirements
-+	addp	$ACC0,$ACC0,$ACC0
-+	 ldp	d10,d11,[sp,#32]
-+	addp	$ACC4,$ACC4,$ACC4
-+	 ldp	d12,d13,[sp,#48]
-+	addp	$ACC1,$ACC1,$ACC1
-+	 ldp	d14,d15,[sp,#64]
-+	addp	$ACC2,$ACC2,$ACC2
-+	 ldr	x30,[sp,#8]
-+	 .inst	0xd50323bf		// autiasp
-+
-+	////////////////////////////////////////////////////////////////
-+	// lazy reduction, but without narrowing
-+
-+	ushr	$T0.2d,$ACC3,#26
-+	and	$ACC3,$ACC3,$MASK.2d
-+	 ushr	$T1.2d,$ACC0,#26
-+	 and	$ACC0,$ACC0,$MASK.2d
-+
-+	add	$ACC4,$ACC4,$T0.2d	// h3 -> h4
-+	 add	$ACC1,$ACC1,$T1.2d	// h0 -> h1
-+
-+	ushr	$T0.2d,$ACC4,#26
-+	and	$ACC4,$ACC4,$MASK.2d
-+	 ushr	$T1.2d,$ACC1,#26
-+	 and	$ACC1,$ACC1,$MASK.2d
-+	 add	$ACC2,$ACC2,$T1.2d	// h1 -> h2
-+
-+	add	$ACC0,$ACC0,$T0.2d
-+	shl	$T0.2d,$T0.2d,#2
-+	 ushr	$T1.2d,$ACC2,#26
-+	 and	$ACC2,$ACC2,$MASK.2d
-+	add	$ACC0,$ACC0,$T0.2d	// h4 -> h0
-+	 add	$ACC3,$ACC3,$T1.2d	// h2 -> h3
-+
-+	ushr	$T0.2d,$ACC0,#26
-+	and	$ACC0,$ACC0,$MASK.2d
-+	 ushr	$T1.2d,$ACC3,#26
-+	 and	$ACC3,$ACC3,$MASK.2d
-+	add	$ACC1,$ACC1,$T0.2d	// h0 -> h1
-+	 add	$ACC4,$ACC4,$T1.2d	// h3 -> h4
-+
-+	////////////////////////////////////////////////////////////////
-+	// write the result, can be partially reduced
-+
-+	st4	{$ACC0,$ACC1,$ACC2,$ACC3}[0],[$ctx],#16
-+	mov	x4,#1
-+	st1	{$ACC4}[0],[$ctx]
-+	str	x4,[$ctx,#8]		// set is_base2_26
-+
-+	ldr	x29,[sp],#80
-+	ret
-+.size	poly1305_blocks_neon,.-poly1305_blocks_neon
-+
-+.align	5
-+.Lzeros:
-+.long	0,0,0,0,0,0,0,0
-+.asciz	"Poly1305 for ARMv8, CRYPTOGAMS by \@dot-asm"
-+.align	2
-+#if !defined(__KERNEL__) && !defined(_WIN64)
-+.comm	OPENSSL_armcap_P,4,4
-+.hidden	OPENSSL_armcap_P
-+#endif
-+___
-+
-+foreach (split("\n",$code)) {
-+	s/\b(shrn\s+v[0-9]+)\.[24]d/$1.2s/			or
-+	s/\b(fmov\s+)v([0-9]+)[^,]*,\s*x([0-9]+)/$1d$2,x$3/	or
-+	(m/\bdup\b/ and (s/\.[24]s/.2d/g or 1))			or
-+	(m/\b(eor|and)/ and (s/\.[248][sdh]/.16b/g or 1))	or
-+	(m/\bum(ul|la)l\b/ and (s/\.4s/.2s/g or 1))		or
-+	(m/\bum(ul|la)l2\b/ and (s/\.2s/.4s/g or 1))		or
-+	(m/\bst[1-4]\s+{[^}]+}\[/ and (s/\.[24]d/.s/g or 1));
-+
-+	s/\.[124]([sd])\[/.$1\[/;
-+	s/w#x([0-9]+)/w$1/g;
-+
-+	print $_,"\n";
-+}
-+close STDOUT;
---- /dev/null
-+++ b/arch/arm64/crypto/poly1305-core.S_shipped
-@@ -0,0 +1,835 @@
-+#ifndef __KERNEL__
-+# include "arm_arch.h"
-+.extern	OPENSSL_armcap_P
-+#endif
-+
-+.text
-+
-+// forward "declarations" are required for Apple
-+.globl	poly1305_blocks
-+.globl	poly1305_emit
-+
-+.globl	poly1305_init
-+.type	poly1305_init,%function
-+.align	5
-+poly1305_init:
-+	cmp	x1,xzr
-+	stp	xzr,xzr,[x0]		// zero hash value
-+	stp	xzr,xzr,[x0,#16]	// [along with is_base2_26]
-+
-+	csel	x0,xzr,x0,eq
-+	b.eq	.Lno_key
-+
-+#ifndef	__KERNEL__
-+	adrp	x17,OPENSSL_armcap_P
-+	ldr	w17,[x17,#:lo12:OPENSSL_armcap_P]
-+#endif
-+
-+	ldp	x7,x8,[x1]		// load key
-+	mov	x9,#0xfffffffc0fffffff
-+	movk	x9,#0x0fff,lsl#48
-+#ifdef	__AARCH64EB__
-+	rev	x7,x7			// flip bytes
-+	rev	x8,x8
-+#endif
-+	and	x7,x7,x9		// &=0ffffffc0fffffff
-+	and	x9,x9,#-4
-+	and	x8,x8,x9		// &=0ffffffc0ffffffc
-+	mov	w9,#-1
-+	stp	x7,x8,[x0,#32]	// save key value
-+	str	w9,[x0,#48]	// impossible key power value
-+
-+#ifndef	__KERNEL__
-+	tst	w17,#ARMV7_NEON
-+
-+	adr	x12,.Lpoly1305_blocks
-+	adr	x7,.Lpoly1305_blocks_neon
-+	adr	x13,.Lpoly1305_emit
-+
-+	csel	x12,x12,x7,eq
-+
-+# ifdef	__ILP32__
-+	stp	w12,w13,[x2]
-+# else
-+	stp	x12,x13,[x2]
-+# endif
-+#endif
-+	mov	x0,#1
-+.Lno_key:
-+	ret
-+.size	poly1305_init,.-poly1305_init
-+
-+.type	poly1305_blocks,%function
-+.align	5
-+poly1305_blocks:
-+.Lpoly1305_blocks:
-+	ands	x2,x2,#-16
-+	b.eq	.Lno_data
-+
-+	ldp	x4,x5,[x0]		// load hash value
-+	ldp	x6,x17,[x0,#16]	// [along with is_base2_26]
-+	ldp	x7,x8,[x0,#32]	// load key value
-+
-+#ifdef	__AARCH64EB__
-+	lsr	x12,x4,#32
-+	mov	w13,w4
-+	lsr	x14,x5,#32
-+	mov	w15,w5
-+	lsr	x16,x6,#32
-+#else
-+	mov	w12,w4
-+	lsr	x13,x4,#32
-+	mov	w14,w5
-+	lsr	x15,x5,#32
-+	mov	w16,w6
-+#endif
-+
-+	add	x12,x12,x13,lsl#26	// base 2^26 -> base 2^64
-+	lsr	x13,x14,#12
-+	adds	x12,x12,x14,lsl#52
-+	add	x13,x13,x15,lsl#14
-+	adc	x13,x13,xzr
-+	lsr	x14,x16,#24
-+	adds	x13,x13,x16,lsl#40
-+	adc	x14,x14,xzr
-+
-+	cmp	x17,#0			// is_base2_26?
-+	add	x9,x8,x8,lsr#2	// s1 = r1 + (r1 >> 2)
-+	csel	x4,x4,x12,eq		// choose between radixes
-+	csel	x5,x5,x13,eq
-+	csel	x6,x6,x14,eq
-+
-+.Loop:
-+	ldp	x10,x11,[x1],#16	// load input
-+	sub	x2,x2,#16
-+#ifdef	__AARCH64EB__
-+	rev	x10,x10
-+	rev	x11,x11
-+#endif
-+	adds	x4,x4,x10		// accumulate input
-+	adcs	x5,x5,x11
-+
-+	mul	x12,x4,x7		// h0*r0
-+	adc	x6,x6,x3
-+	umulh	x13,x4,x7
-+
-+	mul	x10,x5,x9		// h1*5*r1
-+	umulh	x11,x5,x9
-+
-+	adds	x12,x12,x10
-+	mul	x10,x4,x8		// h0*r1
-+	adc	x13,x13,x11
-+	umulh	x14,x4,x8
-+
-+	adds	x13,x13,x10
-+	mul	x10,x5,x7		// h1*r0
-+	adc	x14,x14,xzr
-+	umulh	x11,x5,x7
-+
-+	adds	x13,x13,x10
-+	mul	x10,x6,x9		// h2*5*r1
-+	adc	x14,x14,x11
-+	mul	x11,x6,x7		// h2*r0
-+
-+	adds	x13,x13,x10
-+	adc	x14,x14,x11
-+
-+	and	x10,x14,#-4		// final reduction
-+	and	x6,x14,#3
-+	add	x10,x10,x14,lsr#2
-+	adds	x4,x12,x10
-+	adcs	x5,x13,xzr
-+	adc	x6,x6,xzr
-+
-+	cbnz	x2,.Loop
-+
-+	stp	x4,x5,[x0]		// store hash value
-+	stp	x6,xzr,[x0,#16]	// [and clear is_base2_26]
-+
-+.Lno_data:
-+	ret
-+.size	poly1305_blocks,.-poly1305_blocks
-+
-+.type	poly1305_emit,%function
-+.align	5
-+poly1305_emit:
-+.Lpoly1305_emit:
-+	ldp	x4,x5,[x0]		// load hash base 2^64
-+	ldp	x6,x7,[x0,#16]	// [along with is_base2_26]
-+	ldp	x10,x11,[x2]	// load nonce
-+
-+#ifdef	__AARCH64EB__
-+	lsr	x12,x4,#32
-+	mov	w13,w4
-+	lsr	x14,x5,#32
-+	mov	w15,w5
-+	lsr	x16,x6,#32
-+#else
-+	mov	w12,w4
-+	lsr	x13,x4,#32
-+	mov	w14,w5
-+	lsr	x15,x5,#32
-+	mov	w16,w6
-+#endif
-+
-+	add	x12,x12,x13,lsl#26	// base 2^26 -> base 2^64
-+	lsr	x13,x14,#12
-+	adds	x12,x12,x14,lsl#52
-+	add	x13,x13,x15,lsl#14
-+	adc	x13,x13,xzr
-+	lsr	x14,x16,#24
-+	adds	x13,x13,x16,lsl#40
-+	adc	x14,x14,xzr
-+
-+	cmp	x7,#0			// is_base2_26?
-+	csel	x4,x4,x12,eq		// choose between radixes
-+	csel	x5,x5,x13,eq
-+	csel	x6,x6,x14,eq
-+
-+	adds	x12,x4,#5		// compare to modulus
-+	adcs	x13,x5,xzr
-+	adc	x14,x6,xzr
-+
-+	tst	x14,#-4			// see if it's carried/borrowed
-+
-+	csel	x4,x4,x12,eq
-+	csel	x5,x5,x13,eq
-+
-+#ifdef	__AARCH64EB__
-+	ror	x10,x10,#32		// flip nonce words
-+	ror	x11,x11,#32
-+#endif
-+	adds	x4,x4,x10		// accumulate nonce
-+	adc	x5,x5,x11
-+#ifdef	__AARCH64EB__
-+	rev	x4,x4			// flip output bytes
-+	rev	x5,x5
-+#endif
-+	stp	x4,x5,[x1]		// write result
-+
-+	ret
-+.size	poly1305_emit,.-poly1305_emit
-+.type	poly1305_mult,%function
-+.align	5
-+poly1305_mult:
-+	mul	x12,x4,x7		// h0*r0
-+	umulh	x13,x4,x7
-+
-+	mul	x10,x5,x9		// h1*5*r1
-+	umulh	x11,x5,x9
-+
-+	adds	x12,x12,x10
-+	mul	x10,x4,x8		// h0*r1
-+	adc	x13,x13,x11
-+	umulh	x14,x4,x8
-+
-+	adds	x13,x13,x10
-+	mul	x10,x5,x7		// h1*r0
-+	adc	x14,x14,xzr
-+	umulh	x11,x5,x7
-+
-+	adds	x13,x13,x10
-+	mul	x10,x6,x9		// h2*5*r1
-+	adc	x14,x14,x11
-+	mul	x11,x6,x7		// h2*r0
-+
-+	adds	x13,x13,x10
-+	adc	x14,x14,x11
-+
-+	and	x10,x14,#-4		// final reduction
-+	and	x6,x14,#3
-+	add	x10,x10,x14,lsr#2
-+	adds	x4,x12,x10
-+	adcs	x5,x13,xzr
-+	adc	x6,x6,xzr
-+
-+	ret
-+.size	poly1305_mult,.-poly1305_mult
-+
-+.type	poly1305_splat,%function
-+.align	4
-+poly1305_splat:
-+	and	x12,x4,#0x03ffffff	// base 2^64 -> base 2^26
-+	ubfx	x13,x4,#26,#26
-+	extr	x14,x5,x4,#52
-+	and	x14,x14,#0x03ffffff
-+	ubfx	x15,x5,#14,#26
-+	extr	x16,x6,x5,#40
-+
-+	str	w12,[x0,#16*0]	// r0
-+	add	w12,w13,w13,lsl#2	// r1*5
-+	str	w13,[x0,#16*1]	// r1
-+	add	w13,w14,w14,lsl#2	// r2*5
-+	str	w12,[x0,#16*2]	// s1
-+	str	w14,[x0,#16*3]	// r2
-+	add	w14,w15,w15,lsl#2	// r3*5
-+	str	w13,[x0,#16*4]	// s2
-+	str	w15,[x0,#16*5]	// r3
-+	add	w15,w16,w16,lsl#2	// r4*5
-+	str	w14,[x0,#16*6]	// s3
-+	str	w16,[x0,#16*7]	// r4
-+	str	w15,[x0,#16*8]	// s4
-+
-+	ret
-+.size	poly1305_splat,.-poly1305_splat
-+
-+#ifdef	__KERNEL__
-+.globl	poly1305_blocks_neon
-+#endif
-+.type	poly1305_blocks_neon,%function
-+.align	5
-+poly1305_blocks_neon:
-+.Lpoly1305_blocks_neon:
-+	ldr	x17,[x0,#24]
-+	cmp	x2,#128
-+	b.lo	.Lpoly1305_blocks
-+
-+	.inst	0xd503233f		// paciasp
-+	stp	x29,x30,[sp,#-80]!
-+	add	x29,sp,#0
-+
-+	stp	d8,d9,[sp,#16]		// meet ABI requirements
-+	stp	d10,d11,[sp,#32]
-+	stp	d12,d13,[sp,#48]
-+	stp	d14,d15,[sp,#64]
-+
-+	cbz	x17,.Lbase2_64_neon
-+
-+	ldp	w10,w11,[x0]		// load hash value base 2^26
-+	ldp	w12,w13,[x0,#8]
-+	ldr	w14,[x0,#16]
-+
-+	tst	x2,#31
-+	b.eq	.Leven_neon
-+
-+	ldp	x7,x8,[x0,#32]	// load key value
-+
-+	add	x4,x10,x11,lsl#26	// base 2^26 -> base 2^64
-+	lsr	x5,x12,#12
-+	adds	x4,x4,x12,lsl#52
-+	add	x5,x5,x13,lsl#14
-+	adc	x5,x5,xzr
-+	lsr	x6,x14,#24
-+	adds	x5,x5,x14,lsl#40
-+	adc	x14,x6,xzr		// can be partially reduced...
-+
-+	ldp	x12,x13,[x1],#16	// load input
-+	sub	x2,x2,#16
-+	add	x9,x8,x8,lsr#2	// s1 = r1 + (r1 >> 2)
-+
-+#ifdef	__AARCH64EB__
-+	rev	x12,x12
-+	rev	x13,x13
-+#endif
-+	adds	x4,x4,x12		// accumulate input
-+	adcs	x5,x5,x13
-+	adc	x6,x6,x3
-+
-+	bl	poly1305_mult
-+
-+	and	x10,x4,#0x03ffffff	// base 2^64 -> base 2^26
-+	ubfx	x11,x4,#26,#26
-+	extr	x12,x5,x4,#52
-+	and	x12,x12,#0x03ffffff
-+	ubfx	x13,x5,#14,#26
-+	extr	x14,x6,x5,#40
-+
-+	b	.Leven_neon
-+
-+.align	4
-+.Lbase2_64_neon:
-+	ldp	x7,x8,[x0,#32]	// load key value
-+
-+	ldp	x4,x5,[x0]		// load hash value base 2^64
-+	ldr	x6,[x0,#16]
-+
-+	tst	x2,#31
-+	b.eq	.Linit_neon
-+
-+	ldp	x12,x13,[x1],#16	// load input
-+	sub	x2,x2,#16
-+	add	x9,x8,x8,lsr#2	// s1 = r1 + (r1 >> 2)
-+#ifdef	__AARCH64EB__
-+	rev	x12,x12
-+	rev	x13,x13
-+#endif
-+	adds	x4,x4,x12		// accumulate input
-+	adcs	x5,x5,x13
-+	adc	x6,x6,x3
-+
-+	bl	poly1305_mult
-+
-+.Linit_neon:
-+	ldr	w17,[x0,#48]		// first table element
-+	and	x10,x4,#0x03ffffff	// base 2^64 -> base 2^26
-+	ubfx	x11,x4,#26,#26
-+	extr	x12,x5,x4,#52
-+	and	x12,x12,#0x03ffffff
-+	ubfx	x13,x5,#14,#26
-+	extr	x14,x6,x5,#40
-+
-+	cmp	w17,#-1			// is value impossible?
-+	b.ne	.Leven_neon
-+
-+	fmov	d24,x10
-+	fmov	d25,x11
-+	fmov	d26,x12
-+	fmov	d27,x13
-+	fmov	d28,x14
-+
-+	////////////////////////////////// initialize r^n table
-+	mov	x4,x7			// r^1
-+	add	x9,x8,x8,lsr#2	// s1 = r1 + (r1 >> 2)
-+	mov	x5,x8
-+	mov	x6,xzr
-+	add	x0,x0,#48+12
-+	bl	poly1305_splat
-+
-+	bl	poly1305_mult		// r^2
-+	sub	x0,x0,#4
-+	bl	poly1305_splat
-+
-+	bl	poly1305_mult		// r^3
-+	sub	x0,x0,#4
-+	bl	poly1305_splat
-+
-+	bl	poly1305_mult		// r^4
-+	sub	x0,x0,#4
-+	bl	poly1305_splat
-+	sub	x0,x0,#48		// restore original x0
-+	b	.Ldo_neon
-+
-+.align	4
-+.Leven_neon:
-+	fmov	d24,x10
-+	fmov	d25,x11
-+	fmov	d26,x12
-+	fmov	d27,x13
-+	fmov	d28,x14
-+
-+.Ldo_neon:
-+	ldp	x8,x12,[x1,#32]	// inp[2:3]
-+	subs	x2,x2,#64
-+	ldp	x9,x13,[x1,#48]
-+	add	x16,x1,#96
-+	adr	x17,.Lzeros
-+
-+	lsl	x3,x3,#24
-+	add	x15,x0,#48
-+
-+#ifdef	__AARCH64EB__
-+	rev	x8,x8
-+	rev	x12,x12
-+	rev	x9,x9
-+	rev	x13,x13
-+#endif
-+	and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
-+	and	x5,x9,#0x03ffffff
-+	ubfx	x6,x8,#26,#26
-+	ubfx	x7,x9,#26,#26
-+	add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
-+	extr	x8,x12,x8,#52
-+	extr	x9,x13,x9,#52
-+	add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
-+	fmov	d14,x4
-+	and	x8,x8,#0x03ffffff
-+	and	x9,x9,#0x03ffffff
-+	ubfx	x10,x12,#14,#26
-+	ubfx	x11,x13,#14,#26
-+	add	x12,x3,x12,lsr#40
-+	add	x13,x3,x13,lsr#40
-+	add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
-+	fmov	d15,x6
-+	add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
-+	add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
-+	fmov	d16,x8
-+	fmov	d17,x10
-+	fmov	d18,x12
-+
-+	ldp	x8,x12,[x1],#16	// inp[0:1]
-+	ldp	x9,x13,[x1],#48
-+
-+	ld1	{v0.4s,v1.4s,v2.4s,v3.4s},[x15],#64
-+	ld1	{v4.4s,v5.4s,v6.4s,v7.4s},[x15],#64
-+	ld1	{v8.4s},[x15]
-+
-+#ifdef	__AARCH64EB__
-+	rev	x8,x8
-+	rev	x12,x12
-+	rev	x9,x9
-+	rev	x13,x13
-+#endif
-+	and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
-+	and	x5,x9,#0x03ffffff
-+	ubfx	x6,x8,#26,#26
-+	ubfx	x7,x9,#26,#26
-+	add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
-+	extr	x8,x12,x8,#52
-+	extr	x9,x13,x9,#52
-+	add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
-+	fmov	d9,x4
-+	and	x8,x8,#0x03ffffff
-+	and	x9,x9,#0x03ffffff
-+	ubfx	x10,x12,#14,#26
-+	ubfx	x11,x13,#14,#26
-+	add	x12,x3,x12,lsr#40
-+	add	x13,x3,x13,lsr#40
-+	add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
-+	fmov	d10,x6
-+	add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
-+	add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
-+	movi	v31.2d,#-1
-+	fmov	d11,x8
-+	fmov	d12,x10
-+	fmov	d13,x12
-+	ushr	v31.2d,v31.2d,#38
-+
-+	b.ls	.Lskip_loop
-+
-+.align	4
-+.Loop_neon:
-+	////////////////////////////////////////////////////////////////
-+	// ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2
-+	// ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r
-+	//   ___________________/
-+	// ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2
-+	// ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r
-+	//   ___________________/ ____________________/
-+	//
-+	// Note that we start with inp[2:3]*r^2. This is because it
-+	// doesn't depend on reduction in previous iteration.
-+	////////////////////////////////////////////////////////////////
-+	// d4 = h0*r4 + h1*r3   + h2*r2   + h3*r1   + h4*r0
-+	// d3 = h0*r3 + h1*r2   + h2*r1   + h3*r0   + h4*5*r4
-+	// d2 = h0*r2 + h1*r1   + h2*r0   + h3*5*r4 + h4*5*r3
-+	// d1 = h0*r1 + h1*r0   + h2*5*r4 + h3*5*r3 + h4*5*r2
-+	// d0 = h0*r0 + h1*5*r4 + h2*5*r3 + h3*5*r2 + h4*5*r1
-+
-+	subs	x2,x2,#64
-+	umull	v23.2d,v14.2s,v7.s[2]
-+	csel	x16,x17,x16,lo
-+	umull	v22.2d,v14.2s,v5.s[2]
-+	umull	v21.2d,v14.2s,v3.s[2]
-+	 ldp	x8,x12,[x16],#16	// inp[2:3] (or zero)
-+	umull	v20.2d,v14.2s,v1.s[2]
-+	 ldp	x9,x13,[x16],#48
-+	umull	v19.2d,v14.2s,v0.s[2]
-+#ifdef	__AARCH64EB__
-+	 rev	x8,x8
-+	 rev	x12,x12
-+	 rev	x9,x9
-+	 rev	x13,x13
-+#endif
-+
-+	umlal	v23.2d,v15.2s,v5.s[2]
-+	 and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
-+	umlal	v22.2d,v15.2s,v3.s[2]
-+	 and	x5,x9,#0x03ffffff
-+	umlal	v21.2d,v15.2s,v1.s[2]
-+	 ubfx	x6,x8,#26,#26
-+	umlal	v20.2d,v15.2s,v0.s[2]
-+	 ubfx	x7,x9,#26,#26
-+	umlal	v19.2d,v15.2s,v8.s[2]
-+	 add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
-+
-+	umlal	v23.2d,v16.2s,v3.s[2]
-+	 extr	x8,x12,x8,#52
-+	umlal	v22.2d,v16.2s,v1.s[2]
-+	 extr	x9,x13,x9,#52
-+	umlal	v21.2d,v16.2s,v0.s[2]
-+	 add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
-+	umlal	v20.2d,v16.2s,v8.s[2]
-+	 fmov	d14,x4
-+	umlal	v19.2d,v16.2s,v6.s[2]
-+	 and	x8,x8,#0x03ffffff
-+
-+	umlal	v23.2d,v17.2s,v1.s[2]
-+	 and	x9,x9,#0x03ffffff
-+	umlal	v22.2d,v17.2s,v0.s[2]
-+	 ubfx	x10,x12,#14,#26
-+	umlal	v21.2d,v17.2s,v8.s[2]
-+	 ubfx	x11,x13,#14,#26
-+	umlal	v20.2d,v17.2s,v6.s[2]
-+	 add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
-+	umlal	v19.2d,v17.2s,v4.s[2]
-+	 fmov	d15,x6
-+
-+	add	v11.2s,v11.2s,v26.2s
-+	 add	x12,x3,x12,lsr#40
-+	umlal	v23.2d,v18.2s,v0.s[2]
-+	 add	x13,x3,x13,lsr#40
-+	umlal	v22.2d,v18.2s,v8.s[2]
-+	 add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
-+	umlal	v21.2d,v18.2s,v6.s[2]
-+	 add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
-+	umlal	v20.2d,v18.2s,v4.s[2]
-+	 fmov	d16,x8
-+	umlal	v19.2d,v18.2s,v2.s[2]
-+	 fmov	d17,x10
-+
-+	////////////////////////////////////////////////////////////////
-+	// (hash+inp[0:1])*r^4 and accumulate
-+
-+	add	v9.2s,v9.2s,v24.2s
-+	 fmov	d18,x12
-+	umlal	v22.2d,v11.2s,v1.s[0]
-+	 ldp	x8,x12,[x1],#16	// inp[0:1]
-+	umlal	v19.2d,v11.2s,v6.s[0]
-+	 ldp	x9,x13,[x1],#48
-+	umlal	v23.2d,v11.2s,v3.s[0]
-+	umlal	v20.2d,v11.2s,v8.s[0]
-+	umlal	v21.2d,v11.2s,v0.s[0]
-+#ifdef	__AARCH64EB__
-+	 rev	x8,x8
-+	 rev	x12,x12
-+	 rev	x9,x9
-+	 rev	x13,x13
-+#endif
-+
-+	add	v10.2s,v10.2s,v25.2s
-+	umlal	v22.2d,v9.2s,v5.s[0]
-+	umlal	v23.2d,v9.2s,v7.s[0]
-+	 and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
-+	umlal	v21.2d,v9.2s,v3.s[0]
-+	 and	x5,x9,#0x03ffffff
-+	umlal	v19.2d,v9.2s,v0.s[0]
-+	 ubfx	x6,x8,#26,#26
-+	umlal	v20.2d,v9.2s,v1.s[0]
-+	 ubfx	x7,x9,#26,#26
-+
-+	add	v12.2s,v12.2s,v27.2s
-+	 add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
-+	umlal	v22.2d,v10.2s,v3.s[0]
-+	 extr	x8,x12,x8,#52
-+	umlal	v23.2d,v10.2s,v5.s[0]
-+	 extr	x9,x13,x9,#52
-+	umlal	v19.2d,v10.2s,v8.s[0]
-+	 add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
-+	umlal	v21.2d,v10.2s,v1.s[0]
-+	 fmov	d9,x4
-+	umlal	v20.2d,v10.2s,v0.s[0]
-+	 and	x8,x8,#0x03ffffff
-+
-+	add	v13.2s,v13.2s,v28.2s
-+	 and	x9,x9,#0x03ffffff
-+	umlal	v22.2d,v12.2s,v0.s[0]
-+	 ubfx	x10,x12,#14,#26
-+	umlal	v19.2d,v12.2s,v4.s[0]
-+	 ubfx	x11,x13,#14,#26
-+	umlal	v23.2d,v12.2s,v1.s[0]
-+	 add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
-+	umlal	v20.2d,v12.2s,v6.s[0]
-+	 fmov	d10,x6
-+	umlal	v21.2d,v12.2s,v8.s[0]
-+	 add	x12,x3,x12,lsr#40
-+
-+	umlal	v22.2d,v13.2s,v8.s[0]
-+	 add	x13,x3,x13,lsr#40
-+	umlal	v19.2d,v13.2s,v2.s[0]
-+	 add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
-+	umlal	v23.2d,v13.2s,v0.s[0]
-+	 add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
-+	umlal	v20.2d,v13.2s,v4.s[0]
-+	 fmov	d11,x8
-+	umlal	v21.2d,v13.2s,v6.s[0]
-+	 fmov	d12,x10
-+	 fmov	d13,x12
-+
-+	/////////////////////////////////////////////////////////////////
-+	// lazy reduction as discussed in "NEON crypto" by D.J. Bernstein
-+	// and P. Schwabe
-+	//
-+	// [see discussion in poly1305-armv4 module]
-+
-+	ushr	v29.2d,v22.2d,#26
-+	xtn	v27.2s,v22.2d
-+	 ushr	v30.2d,v19.2d,#26
-+	 and	v19.16b,v19.16b,v31.16b
-+	add	v23.2d,v23.2d,v29.2d	// h3 -> h4
-+	bic	v27.2s,#0xfc,lsl#24	// &=0x03ffffff
-+	 add	v20.2d,v20.2d,v30.2d	// h0 -> h1
-+
-+	ushr	v29.2d,v23.2d,#26
-+	xtn	v28.2s,v23.2d
-+	 ushr	v30.2d,v20.2d,#26
-+	 xtn	v25.2s,v20.2d
-+	bic	v28.2s,#0xfc,lsl#24
-+	 add	v21.2d,v21.2d,v30.2d	// h1 -> h2
-+
-+	add	v19.2d,v19.2d,v29.2d
-+	shl	v29.2d,v29.2d,#2
-+	 shrn	v30.2s,v21.2d,#26
-+	 xtn	v26.2s,v21.2d
-+	add	v19.2d,v19.2d,v29.2d	// h4 -> h0
-+	 bic	v25.2s,#0xfc,lsl#24
-+	 add	v27.2s,v27.2s,v30.2s		// h2 -> h3
-+	 bic	v26.2s,#0xfc,lsl#24
-+
-+	shrn	v29.2s,v19.2d,#26
-+	xtn	v24.2s,v19.2d
-+	 ushr	v30.2s,v27.2s,#26
-+	 bic	v27.2s,#0xfc,lsl#24
-+	 bic	v24.2s,#0xfc,lsl#24
-+	add	v25.2s,v25.2s,v29.2s		// h0 -> h1
-+	 add	v28.2s,v28.2s,v30.2s		// h3 -> h4
-+
-+	b.hi	.Loop_neon
-+
-+.Lskip_loop:
-+	dup	v16.2d,v16.d[0]
-+	add	v11.2s,v11.2s,v26.2s
-+
-+	////////////////////////////////////////////////////////////////
-+	// multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1
-+
-+	adds	x2,x2,#32
-+	b.ne	.Long_tail
-+
-+	dup	v16.2d,v11.d[0]
-+	add	v14.2s,v9.2s,v24.2s
-+	add	v17.2s,v12.2s,v27.2s
-+	add	v15.2s,v10.2s,v25.2s
-+	add	v18.2s,v13.2s,v28.2s
-+
-+.Long_tail:
-+	dup	v14.2d,v14.d[0]
-+	umull2	v19.2d,v16.4s,v6.4s
-+	umull2	v22.2d,v16.4s,v1.4s
-+	umull2	v23.2d,v16.4s,v3.4s
-+	umull2	v21.2d,v16.4s,v0.4s
-+	umull2	v20.2d,v16.4s,v8.4s
-+
-+	dup	v15.2d,v15.d[0]
-+	umlal2	v19.2d,v14.4s,v0.4s
-+	umlal2	v21.2d,v14.4s,v3.4s
-+	umlal2	v22.2d,v14.4s,v5.4s
-+	umlal2	v23.2d,v14.4s,v7.4s
-+	umlal2	v20.2d,v14.4s,v1.4s
-+
-+	dup	v17.2d,v17.d[0]
-+	umlal2	v19.2d,v15.4s,v8.4s
-+	umlal2	v22.2d,v15.4s,v3.4s
-+	umlal2	v21.2d,v15.4s,v1.4s
-+	umlal2	v23.2d,v15.4s,v5.4s
-+	umlal2	v20.2d,v15.4s,v0.4s
-+
-+	dup	v18.2d,v18.d[0]
-+	umlal2	v22.2d,v17.4s,v0.4s
-+	umlal2	v23.2d,v17.4s,v1.4s
-+	umlal2	v19.2d,v17.4s,v4.4s
-+	umlal2	v20.2d,v17.4s,v6.4s
-+	umlal2	v21.2d,v17.4s,v8.4s
-+
-+	umlal2	v22.2d,v18.4s,v8.4s
-+	umlal2	v19.2d,v18.4s,v2.4s
-+	umlal2	v23.2d,v18.4s,v0.4s
-+	umlal2	v20.2d,v18.4s,v4.4s
-+	umlal2	v21.2d,v18.4s,v6.4s
-+
-+	b.eq	.Lshort_tail
-+
-+	////////////////////////////////////////////////////////////////
-+	// (hash+inp[0:1])*r^4:r^3 and accumulate
-+
-+	add	v9.2s,v9.2s,v24.2s
-+	umlal	v22.2d,v11.2s,v1.2s
-+	umlal	v19.2d,v11.2s,v6.2s
-+	umlal	v23.2d,v11.2s,v3.2s
-+	umlal	v20.2d,v11.2s,v8.2s
-+	umlal	v21.2d,v11.2s,v0.2s
-+
-+	add	v10.2s,v10.2s,v25.2s
-+	umlal	v22.2d,v9.2s,v5.2s
-+	umlal	v19.2d,v9.2s,v0.2s
-+	umlal	v23.2d,v9.2s,v7.2s
-+	umlal	v20.2d,v9.2s,v1.2s
-+	umlal	v21.2d,v9.2s,v3.2s
-+
-+	add	v12.2s,v12.2s,v27.2s
-+	umlal	v22.2d,v10.2s,v3.2s
-+	umlal	v19.2d,v10.2s,v8.2s
-+	umlal	v23.2d,v10.2s,v5.2s
-+	umlal	v20.2d,v10.2s,v0.2s
-+	umlal	v21.2d,v10.2s,v1.2s
-+
-+	add	v13.2s,v13.2s,v28.2s
-+	umlal	v22.2d,v12.2s,v0.2s
-+	umlal	v19.2d,v12.2s,v4.2s
-+	umlal	v23.2d,v12.2s,v1.2s
-+	umlal	v20.2d,v12.2s,v6.2s
-+	umlal	v21.2d,v12.2s,v8.2s
-+
-+	umlal	v22.2d,v13.2s,v8.2s
-+	umlal	v19.2d,v13.2s,v2.2s
-+	umlal	v23.2d,v13.2s,v0.2s
-+	umlal	v20.2d,v13.2s,v4.2s
-+	umlal	v21.2d,v13.2s,v6.2s
-+
-+.Lshort_tail:
-+	////////////////////////////////////////////////////////////////
-+	// horizontal add
-+
-+	addp	v22.2d,v22.2d,v22.2d
-+	 ldp	d8,d9,[sp,#16]		// meet ABI requirements
-+	addp	v19.2d,v19.2d,v19.2d
-+	 ldp	d10,d11,[sp,#32]
-+	addp	v23.2d,v23.2d,v23.2d
-+	 ldp	d12,d13,[sp,#48]
-+	addp	v20.2d,v20.2d,v20.2d
-+	 ldp	d14,d15,[sp,#64]
-+	addp	v21.2d,v21.2d,v21.2d
-+	 ldr	x30,[sp,#8]
-+	 .inst	0xd50323bf		// autiasp
-+
-+	////////////////////////////////////////////////////////////////
-+	// lazy reduction, but without narrowing
-+
-+	ushr	v29.2d,v22.2d,#26
-+	and	v22.16b,v22.16b,v31.16b
-+	 ushr	v30.2d,v19.2d,#26
-+	 and	v19.16b,v19.16b,v31.16b
-+
-+	add	v23.2d,v23.2d,v29.2d	// h3 -> h4
-+	 add	v20.2d,v20.2d,v30.2d	// h0 -> h1
-+
-+	ushr	v29.2d,v23.2d,#26
-+	and	v23.16b,v23.16b,v31.16b
-+	 ushr	v30.2d,v20.2d,#26
-+	 and	v20.16b,v20.16b,v31.16b
-+	 add	v21.2d,v21.2d,v30.2d	// h1 -> h2
-+
-+	add	v19.2d,v19.2d,v29.2d
-+	shl	v29.2d,v29.2d,#2
-+	 ushr	v30.2d,v21.2d,#26
-+	 and	v21.16b,v21.16b,v31.16b
-+	add	v19.2d,v19.2d,v29.2d	// h4 -> h0
-+	 add	v22.2d,v22.2d,v30.2d	// h2 -> h3
-+
-+	ushr	v29.2d,v19.2d,#26
-+	and	v19.16b,v19.16b,v31.16b
-+	 ushr	v30.2d,v22.2d,#26
-+	 and	v22.16b,v22.16b,v31.16b
-+	add	v20.2d,v20.2d,v29.2d	// h0 -> h1
-+	 add	v23.2d,v23.2d,v30.2d	// h3 -> h4
-+
-+	////////////////////////////////////////////////////////////////
-+	// write the result, can be partially reduced
-+
-+	st4	{v19.s,v20.s,v21.s,v22.s}[0],[x0],#16
-+	mov	x4,#1
-+	st1	{v23.s}[0],[x0]
-+	str	x4,[x0,#8]		// set is_base2_26
-+
-+	ldr	x29,[sp],#80
-+	ret
-+.size	poly1305_blocks_neon,.-poly1305_blocks_neon
-+
-+.align	5
-+.Lzeros:
-+.long	0,0,0,0,0,0,0,0
-+.asciz	"Poly1305 for ARMv8, CRYPTOGAMS by @dot-asm"
-+.align	2
-+#if !defined(__KERNEL__) && !defined(_WIN64)
-+.comm	OPENSSL_armcap_P,4,4
-+.hidden	OPENSSL_armcap_P
-+#endif
---- /dev/null
-+++ b/arch/arm64/crypto/poly1305-glue.c
-@@ -0,0 +1,237 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * OpenSSL/Cryptogams accelerated Poly1305 transform for arm64
-+ *
-+ * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org>
-+ */
-+
-+#include <asm/hwcap.h>
-+#include <asm/neon.h>
-+#include <asm/simd.h>
-+#include <asm/unaligned.h>
-+#include <crypto/algapi.h>
-+#include <crypto/internal/hash.h>
-+#include <crypto/internal/poly1305.h>
-+#include <crypto/internal/simd.h>
-+#include <linux/cpufeature.h>
-+#include <linux/crypto.h>
-+#include <linux/jump_label.h>
-+#include <linux/module.h>
-+
-+asmlinkage void poly1305_init_arm64(void *state, const u8 *key);
-+asmlinkage void poly1305_blocks(void *state, const u8 *src, u32 len, u32 hibit);
-+asmlinkage void poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit);
-+asmlinkage void poly1305_emit(void *state, __le32 *digest, const u32 *nonce);
-+
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-+
-+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
-+{
-+	poly1305_init_arm64(&dctx->h, key);
-+	dctx->s[0] = get_unaligned_le32(key + 16);
-+	dctx->s[1] = get_unaligned_le32(key + 20);
-+	dctx->s[2] = get_unaligned_le32(key + 24);
-+	dctx->s[3] = get_unaligned_le32(key + 28);
-+	dctx->buflen = 0;
-+}
-+EXPORT_SYMBOL(poly1305_init_arch);
-+
-+static int neon_poly1305_init(struct shash_desc *desc)
-+{
-+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-+
-+	dctx->buflen = 0;
-+	dctx->rset = 0;
-+	dctx->sset = false;
-+
-+	return 0;
-+}
-+
-+static void neon_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
-+				 u32 len, u32 hibit, bool do_neon)
-+{
-+	if (unlikely(!dctx->sset)) {
-+		if (!dctx->rset) {
-+			poly1305_init_arch(dctx, src);
-+			src += POLY1305_BLOCK_SIZE;
-+			len -= POLY1305_BLOCK_SIZE;
-+			dctx->rset = 1;
-+		}
-+		if (len >= POLY1305_BLOCK_SIZE) {
-+			dctx->s[0] = get_unaligned_le32(src +  0);
-+			dctx->s[1] = get_unaligned_le32(src +  4);
-+			dctx->s[2] = get_unaligned_le32(src +  8);
-+			dctx->s[3] = get_unaligned_le32(src + 12);
-+			src += POLY1305_BLOCK_SIZE;
-+			len -= POLY1305_BLOCK_SIZE;
-+			dctx->sset = true;
-+		}
-+		if (len < POLY1305_BLOCK_SIZE)
-+			return;
-+	}
-+
-+	len &= ~(POLY1305_BLOCK_SIZE - 1);
-+
-+	if (static_branch_likely(&have_neon) && likely(do_neon))
-+		poly1305_blocks_neon(&dctx->h, src, len, hibit);
-+	else
-+		poly1305_blocks(&dctx->h, src, len, hibit);
-+}
-+
-+static void neon_poly1305_do_update(struct poly1305_desc_ctx *dctx,
-+				    const u8 *src, u32 len, bool do_neon)
-+{
-+	if (unlikely(dctx->buflen)) {
-+		u32 bytes = min(len, POLY1305_BLOCK_SIZE - dctx->buflen);
-+
-+		memcpy(dctx->buf + dctx->buflen, src, bytes);
-+		src += bytes;
-+		len -= bytes;
-+		dctx->buflen += bytes;
-+
-+		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-+			neon_poly1305_blocks(dctx, dctx->buf,
-+					     POLY1305_BLOCK_SIZE, 1, false);
-+			dctx->buflen = 0;
-+		}
-+	}
-+
-+	if (likely(len >= POLY1305_BLOCK_SIZE)) {
-+		neon_poly1305_blocks(dctx, src, len, 1, do_neon);
-+		src += round_down(len, POLY1305_BLOCK_SIZE);
-+		len %= POLY1305_BLOCK_SIZE;
-+	}
-+
-+	if (unlikely(len)) {
-+		dctx->buflen = len;
-+		memcpy(dctx->buf, src, len);
-+	}
-+}
-+
-+static int neon_poly1305_update(struct shash_desc *desc,
-+				const u8 *src, unsigned int srclen)
-+{
-+	bool do_neon = crypto_simd_usable() && srclen > 128;
-+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-+
-+	if (static_branch_likely(&have_neon) && do_neon)
-+		kernel_neon_begin();
-+	neon_poly1305_do_update(dctx, src, srclen, do_neon);
-+	if (static_branch_likely(&have_neon) && do_neon)
-+		kernel_neon_end();
-+	return 0;
-+}
-+
-+void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src,
-+			  unsigned int nbytes)
-+{
-+	if (unlikely(dctx->buflen)) {
-+		u32 bytes = min(nbytes, POLY1305_BLOCK_SIZE - dctx->buflen);
-+
-+		memcpy(dctx->buf + dctx->buflen, src, bytes);
-+		src += bytes;
-+		nbytes -= bytes;
-+		dctx->buflen += bytes;
-+
-+		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-+			poly1305_blocks(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 1);
-+			dctx->buflen = 0;
-+		}
-+	}
-+
-+	if (likely(nbytes >= POLY1305_BLOCK_SIZE)) {
-+		unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE);
-+
-+		if (static_branch_likely(&have_neon) && crypto_simd_usable()) {
-+			kernel_neon_begin();
-+			poly1305_blocks_neon(&dctx->h, src, len, 1);
-+			kernel_neon_end();
-+		} else {
-+			poly1305_blocks(&dctx->h, src, len, 1);
-+		}
-+		src += len;
-+		nbytes %= POLY1305_BLOCK_SIZE;
-+	}
-+
-+	if (unlikely(nbytes)) {
-+		dctx->buflen = nbytes;
-+		memcpy(dctx->buf, src, nbytes);
-+	}
-+}
-+EXPORT_SYMBOL(poly1305_update_arch);
-+
-+void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst)
-+{
-+	__le32 digest[4];
-+	u64 f = 0;
-+
-+	if (unlikely(dctx->buflen)) {
-+		dctx->buf[dctx->buflen++] = 1;
-+		memset(dctx->buf + dctx->buflen, 0,
-+		       POLY1305_BLOCK_SIZE - dctx->buflen);
-+		poly1305_blocks(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
-+	}
-+
-+	poly1305_emit(&dctx->h, digest, dctx->s);
-+
-+	/* mac = (h + s) % (2^128) */
-+	f = (f >> 32) + le32_to_cpu(digest[0]);
-+	put_unaligned_le32(f, dst);
-+	f = (f >> 32) + le32_to_cpu(digest[1]);
-+	put_unaligned_le32(f, dst + 4);
-+	f = (f >> 32) + le32_to_cpu(digest[2]);
-+	put_unaligned_le32(f, dst + 8);
-+	f = (f >> 32) + le32_to_cpu(digest[3]);
-+	put_unaligned_le32(f, dst + 12);
-+
-+	*dctx = (struct poly1305_desc_ctx){};
-+}
-+EXPORT_SYMBOL(poly1305_final_arch);
-+
-+static int neon_poly1305_final(struct shash_desc *desc, u8 *dst)
-+{
-+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-+
-+	if (unlikely(!dctx->sset))
-+		return -ENOKEY;
-+
-+	poly1305_final_arch(dctx, dst);
-+	return 0;
-+}
-+
-+static struct shash_alg neon_poly1305_alg = {
-+	.init			= neon_poly1305_init,
-+	.update			= neon_poly1305_update,
-+	.final			= neon_poly1305_final,
-+	.digestsize		= POLY1305_DIGEST_SIZE,
-+	.descsize		= sizeof(struct poly1305_desc_ctx),
-+
-+	.base.cra_name		= "poly1305",
-+	.base.cra_driver_name	= "poly1305-neon",
-+	.base.cra_priority	= 200,
-+	.base.cra_blocksize	= POLY1305_BLOCK_SIZE,
-+	.base.cra_module	= THIS_MODULE,
-+};
-+
-+static int __init neon_poly1305_mod_init(void)
-+{
-+	if (!cpu_have_named_feature(ASIMD))
-+		return 0;
-+
-+	static_branch_enable(&have_neon);
-+
-+	return crypto_register_shash(&neon_poly1305_alg);
-+}
-+
-+static void __exit neon_poly1305_mod_exit(void)
-+{
-+	if (cpu_have_named_feature(ASIMD))
-+		crypto_unregister_shash(&neon_poly1305_alg);
-+}
-+
-+module_init(neon_poly1305_mod_init);
-+module_exit(neon_poly1305_mod_exit);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS_CRYPTO("poly1305");
-+MODULE_ALIAS_CRYPTO("poly1305-neon");
---- a/lib/crypto/Kconfig
-+++ b/lib/crypto/Kconfig
-@@ -40,6 +40,7 @@ config CRYPTO_LIB_DES
- config CRYPTO_LIB_POLY1305_RSIZE
- 	int
- 	default 4 if X86_64
-+	default 9 if ARM64
- 	default 1
- 
- config CRYPTO_ARCH_HAVE_LIB_POLY1305
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0019-crypto-arm-poly1305-incorporate-OpenSSL-CRYPTOGAMS-N.patch b/target/linux/generic/backport-5.4/080-wireguard-0019-crypto-arm-poly1305-incorporate-OpenSSL-CRYPTOGAMS-N.patch
deleted file mode 100644
index 367b20fc3a..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0019-crypto-arm-poly1305-incorporate-OpenSSL-CRYPTOGAMS-N.patch
+++ /dev/null
@@ -1,2776 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:25 +0100
-Subject: [PATCH] crypto: arm/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON
- implementation
-
-commit a6b803b3ddc793d6db0c16f12fc12d30d20fa9cc upstream.
-
-This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation
-for NEON authored by Andy Polyakov, and contributed by him to the OpenSSL
-project. The file 'poly1305-armv4.pl' is taken straight from this upstream
-GitHub repository [0] at commit ec55a08dc0244ce570c4fc7cade330c60798952f,
-and already contains all the changes required to build it as part of a
-Linux kernel module.
-
-[0] https://github.com/dot-asm/cryptogams
-
-Co-developed-by: Andy Polyakov <appro@cryptogams.org>
-Signed-off-by: Andy Polyakov <appro@cryptogams.org>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/Kconfig                 |    5 +
- arch/arm/crypto/Makefile                |   12 +-
- arch/arm/crypto/poly1305-armv4.pl       | 1236 +++++++++++++++++++++++
- arch/arm/crypto/poly1305-core.S_shipped | 1158 +++++++++++++++++++++
- arch/arm/crypto/poly1305-glue.c         |  276 +++++
- lib/crypto/Kconfig                      |    2 +-
- 6 files changed, 2687 insertions(+), 2 deletions(-)
- create mode 100644 arch/arm/crypto/poly1305-armv4.pl
- create mode 100644 arch/arm/crypto/poly1305-core.S_shipped
- create mode 100644 arch/arm/crypto/poly1305-glue.c
-
---- a/arch/arm/crypto/Kconfig
-+++ b/arch/arm/crypto/Kconfig
-@@ -131,6 +131,11 @@ config CRYPTO_CHACHA20_NEON
- 	select CRYPTO_BLKCIPHER
- 	select CRYPTO_ARCH_HAVE_LIB_CHACHA
- 
-+config CRYPTO_POLY1305_ARM
-+	tristate "Accelerated scalar and SIMD Poly1305 hash implementations"
-+	select CRYPTO_HASH
-+	select CRYPTO_ARCH_HAVE_LIB_POLY1305
-+
- config CRYPTO_NHPOLY1305_NEON
- 	tristate "NEON accelerated NHPoly1305 hash function (for Adiantum)"
- 	depends on KERNEL_MODE_NEON
---- a/arch/arm/crypto/Makefile
-+++ b/arch/arm/crypto/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sh
- obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o
- obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o
- obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
-+obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o
- obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o
- 
- ce-obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o
-@@ -55,12 +56,16 @@ crct10dif-arm-ce-y	:= crct10dif-ce-core.
- crc32-arm-ce-y:= crc32-ce-core.o crc32-ce-glue.o
- chacha-neon-y := chacha-scalar-core.o chacha-glue.o
- chacha-neon-$(CONFIG_KERNEL_MODE_NEON) += chacha-neon-core.o
-+poly1305-arm-y := poly1305-core.o poly1305-glue.o
- nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o
- 
- ifdef REGENERATE_ARM_CRYPTO
- quiet_cmd_perl = PERL    $@
-       cmd_perl = $(PERL) $(<) > $(@)
- 
-+$(src)/poly1305-core.S_shipped: $(src)/poly1305-armv4.pl
-+	$(call cmd,perl)
-+
- $(src)/sha256-core.S_shipped: $(src)/sha256-armv4.pl
- 	$(call cmd,perl)
- 
-@@ -68,4 +73,9 @@ $(src)/sha512-core.S_shipped: $(src)/sha
- 	$(call cmd,perl)
- endif
- 
--clean-files += sha256-core.S sha512-core.S
-+clean-files += poly1305-core.S sha256-core.S sha512-core.S
-+
-+# massage the perlasm code a bit so we only get the NEON routine if we need it
-+poly1305-aflags-$(CONFIG_CPU_V7) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=5
-+poly1305-aflags-$(CONFIG_KERNEL_MODE_NEON) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=7
-+AFLAGS_poly1305-core.o += $(poly1305-aflags-y)
---- /dev/null
-+++ b/arch/arm/crypto/poly1305-armv4.pl
-@@ -0,0 +1,1236 @@
-+#!/usr/bin/env perl
-+# SPDX-License-Identifier: GPL-1.0+ OR BSD-3-Clause
-+#
-+# ====================================================================
-+# Written by Andy Polyakov, @dot-asm, initially for the OpenSSL
-+# project.
-+# ====================================================================
-+#
-+#			IALU(*)/gcc-4.4		NEON
-+#
-+# ARM11xx(ARMv6)	7.78/+100%		-
-+# Cortex-A5		6.35/+130%		3.00
-+# Cortex-A8		6.25/+115%		2.36
-+# Cortex-A9		5.10/+95%		2.55
-+# Cortex-A15		3.85/+85%		1.25(**)
-+# Snapdragon S4		5.70/+100%		1.48(**)
-+#
-+# (*)	this is for -march=armv6, i.e. with bunch of ldrb loading data;
-+# (**)	these are trade-off results, they can be improved by ~8% but at
-+#	the cost of 15/12% regression on Cortex-A5/A7, it's even possible
-+#	to improve Cortex-A9 result, but then A5/A7 loose more than 20%;
-+
-+$flavour = shift;
-+if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
-+else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
-+
-+if ($flavour && $flavour ne "void") {
-+    $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-+    ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
-+    ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
-+    die "can't locate arm-xlate.pl";
-+
-+    open STDOUT,"| \"$^X\" $xlate $flavour $output";
-+} else {
-+    open STDOUT,">$output";
-+}
-+
-+($ctx,$inp,$len,$padbit)=map("r$_",(0..3));
-+
-+$code.=<<___;
-+#ifndef	__KERNEL__
-+# include "arm_arch.h"
-+#else
-+# define __ARM_ARCH__ __LINUX_ARM_ARCH__
-+# define __ARM_MAX_ARCH__ __LINUX_ARM_ARCH__
-+# define poly1305_init   poly1305_init_arm
-+# define poly1305_blocks poly1305_blocks_arm
-+# define poly1305_emit   poly1305_emit_arm
-+.globl	poly1305_blocks_neon
-+#endif
-+
-+#if defined(__thumb2__)
-+.syntax	unified
-+.thumb
-+#else
-+.code	32
-+#endif
-+
-+.text
-+
-+.globl	poly1305_emit
-+.globl	poly1305_blocks
-+.globl	poly1305_init
-+.type	poly1305_init,%function
-+.align	5
-+poly1305_init:
-+.Lpoly1305_init:
-+	stmdb	sp!,{r4-r11}
-+
-+	eor	r3,r3,r3
-+	cmp	$inp,#0
-+	str	r3,[$ctx,#0]		@ zero hash value
-+	str	r3,[$ctx,#4]
-+	str	r3,[$ctx,#8]
-+	str	r3,[$ctx,#12]
-+	str	r3,[$ctx,#16]
-+	str	r3,[$ctx,#36]		@ clear is_base2_26
-+	add	$ctx,$ctx,#20
-+
-+#ifdef	__thumb2__
-+	it	eq
-+#endif
-+	moveq	r0,#0
-+	beq	.Lno_key
-+
-+#if	__ARM_MAX_ARCH__>=7
-+	mov	r3,#-1
-+	str	r3,[$ctx,#28]		@ impossible key power value
-+# ifndef __KERNEL__
-+	adr	r11,.Lpoly1305_init
-+	ldr	r12,.LOPENSSL_armcap
-+# endif
-+#endif
-+	ldrb	r4,[$inp,#0]
-+	mov	r10,#0x0fffffff
-+	ldrb	r5,[$inp,#1]
-+	and	r3,r10,#-4		@ 0x0ffffffc
-+	ldrb	r6,[$inp,#2]
-+	ldrb	r7,[$inp,#3]
-+	orr	r4,r4,r5,lsl#8
-+	ldrb	r5,[$inp,#4]
-+	orr	r4,r4,r6,lsl#16
-+	ldrb	r6,[$inp,#5]
-+	orr	r4,r4,r7,lsl#24
-+	ldrb	r7,[$inp,#6]
-+	and	r4,r4,r10
-+
-+#if	__ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-+# if !defined(_WIN32)
-+	ldr	r12,[r11,r12]		@ OPENSSL_armcap_P
-+# endif
-+# if defined(__APPLE__) || defined(_WIN32)
-+	ldr	r12,[r12]
-+# endif
-+#endif
-+	ldrb	r8,[$inp,#7]
-+	orr	r5,r5,r6,lsl#8
-+	ldrb	r6,[$inp,#8]
-+	orr	r5,r5,r7,lsl#16
-+	ldrb	r7,[$inp,#9]
-+	orr	r5,r5,r8,lsl#24
-+	ldrb	r8,[$inp,#10]
-+	and	r5,r5,r3
-+
-+#if	__ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-+	tst	r12,#ARMV7_NEON		@ check for NEON
-+# ifdef	__thumb2__
-+	adr	r9,.Lpoly1305_blocks_neon
-+	adr	r11,.Lpoly1305_blocks
-+	it	ne
-+	movne	r11,r9
-+	adr	r12,.Lpoly1305_emit
-+	orr	r11,r11,#1		@ thumb-ify addresses
-+	orr	r12,r12,#1
-+# else
-+	add	r12,r11,#(.Lpoly1305_emit-.Lpoly1305_init)
-+	ite	eq
-+	addeq	r11,r11,#(.Lpoly1305_blocks-.Lpoly1305_init)
-+	addne	r11,r11,#(.Lpoly1305_blocks_neon-.Lpoly1305_init)
-+# endif
-+#endif
-+	ldrb	r9,[$inp,#11]
-+	orr	r6,r6,r7,lsl#8
-+	ldrb	r7,[$inp,#12]
-+	orr	r6,r6,r8,lsl#16
-+	ldrb	r8,[$inp,#13]
-+	orr	r6,r6,r9,lsl#24
-+	ldrb	r9,[$inp,#14]
-+	and	r6,r6,r3
-+
-+	ldrb	r10,[$inp,#15]
-+	orr	r7,r7,r8,lsl#8
-+	str	r4,[$ctx,#0]
-+	orr	r7,r7,r9,lsl#16
-+	str	r5,[$ctx,#4]
-+	orr	r7,r7,r10,lsl#24
-+	str	r6,[$ctx,#8]
-+	and	r7,r7,r3
-+	str	r7,[$ctx,#12]
-+#if	__ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-+	stmia	r2,{r11,r12}		@ fill functions table
-+	mov	r0,#1
-+#else
-+	mov	r0,#0
-+#endif
-+.Lno_key:
-+	ldmia	sp!,{r4-r11}
-+#if	__ARM_ARCH__>=5
-+	ret				@ bx	lr
-+#else
-+	tst	lr,#1
-+	moveq	pc,lr			@ be binary compatible with V4, yet
-+	bx	lr			@ interoperable with Thumb ISA:-)
-+#endif
-+.size	poly1305_init,.-poly1305_init
-+___
-+{
-+my ($h0,$h1,$h2,$h3,$h4,$r0,$r1,$r2,$r3)=map("r$_",(4..12));
-+my ($s1,$s2,$s3)=($r1,$r2,$r3);
-+
-+$code.=<<___;
-+.type	poly1305_blocks,%function
-+.align	5
-+poly1305_blocks:
-+.Lpoly1305_blocks:
-+	stmdb	sp!,{r3-r11,lr}
-+
-+	ands	$len,$len,#-16
-+	beq	.Lno_data
-+
-+	add	$len,$len,$inp		@ end pointer
-+	sub	sp,sp,#32
-+
-+#if __ARM_ARCH__<7
-+	ldmia	$ctx,{$h0-$r3}		@ load context
-+	add	$ctx,$ctx,#20
-+	str	$len,[sp,#16]		@ offload stuff
-+	str	$ctx,[sp,#12]
-+#else
-+	ldr	lr,[$ctx,#36]		@ is_base2_26
-+	ldmia	$ctx!,{$h0-$h4}		@ load hash value
-+	str	$len,[sp,#16]		@ offload stuff
-+	str	$ctx,[sp,#12]
-+
-+	adds	$r0,$h0,$h1,lsl#26	@ base 2^26 -> base 2^32
-+	mov	$r1,$h1,lsr#6
-+	adcs	$r1,$r1,$h2,lsl#20
-+	mov	$r2,$h2,lsr#12
-+	adcs	$r2,$r2,$h3,lsl#14
-+	mov	$r3,$h3,lsr#18
-+	adcs	$r3,$r3,$h4,lsl#8
-+	mov	$len,#0
-+	teq	lr,#0
-+	str	$len,[$ctx,#16]		@ clear is_base2_26
-+	adc	$len,$len,$h4,lsr#24
-+
-+	itttt	ne
-+	movne	$h0,$r0			@ choose between radixes
-+	movne	$h1,$r1
-+	movne	$h2,$r2
-+	movne	$h3,$r3
-+	ldmia	$ctx,{$r0-$r3}		@ load key
-+	it	ne
-+	movne	$h4,$len
-+#endif
-+
-+	mov	lr,$inp
-+	cmp	$padbit,#0
-+	str	$r1,[sp,#20]
-+	str	$r2,[sp,#24]
-+	str	$r3,[sp,#28]
-+	b	.Loop
-+
-+.align	4
-+.Loop:
-+#if __ARM_ARCH__<7
-+	ldrb	r0,[lr],#16		@ load input
-+# ifdef	__thumb2__
-+	it	hi
-+# endif
-+	addhi	$h4,$h4,#1		@ 1<<128
-+	ldrb	r1,[lr,#-15]
-+	ldrb	r2,[lr,#-14]
-+	ldrb	r3,[lr,#-13]
-+	orr	r1,r0,r1,lsl#8
-+	ldrb	r0,[lr,#-12]
-+	orr	r2,r1,r2,lsl#16
-+	ldrb	r1,[lr,#-11]
-+	orr	r3,r2,r3,lsl#24
-+	ldrb	r2,[lr,#-10]
-+	adds	$h0,$h0,r3		@ accumulate input
-+
-+	ldrb	r3,[lr,#-9]
-+	orr	r1,r0,r1,lsl#8
-+	ldrb	r0,[lr,#-8]
-+	orr	r2,r1,r2,lsl#16
-+	ldrb	r1,[lr,#-7]
-+	orr	r3,r2,r3,lsl#24
-+	ldrb	r2,[lr,#-6]
-+	adcs	$h1,$h1,r3
-+
-+	ldrb	r3,[lr,#-5]
-+	orr	r1,r0,r1,lsl#8
-+	ldrb	r0,[lr,#-4]
-+	orr	r2,r1,r2,lsl#16
-+	ldrb	r1,[lr,#-3]
-+	orr	r3,r2,r3,lsl#24
-+	ldrb	r2,[lr,#-2]
-+	adcs	$h2,$h2,r3
-+
-+	ldrb	r3,[lr,#-1]
-+	orr	r1,r0,r1,lsl#8
-+	str	lr,[sp,#8]		@ offload input pointer
-+	orr	r2,r1,r2,lsl#16
-+	add	$s1,$r1,$r1,lsr#2
-+	orr	r3,r2,r3,lsl#24
-+#else
-+	ldr	r0,[lr],#16		@ load input
-+	it	hi
-+	addhi	$h4,$h4,#1		@ padbit
-+	ldr	r1,[lr,#-12]
-+	ldr	r2,[lr,#-8]
-+	ldr	r3,[lr,#-4]
-+# ifdef	__ARMEB__
-+	rev	r0,r0
-+	rev	r1,r1
-+	rev	r2,r2
-+	rev	r3,r3
-+# endif
-+	adds	$h0,$h0,r0		@ accumulate input
-+	str	lr,[sp,#8]		@ offload input pointer
-+	adcs	$h1,$h1,r1
-+	add	$s1,$r1,$r1,lsr#2
-+	adcs	$h2,$h2,r2
-+#endif
-+	add	$s2,$r2,$r2,lsr#2
-+	adcs	$h3,$h3,r3
-+	add	$s3,$r3,$r3,lsr#2
-+
-+	umull	r2,r3,$h1,$r0
-+	 adc	$h4,$h4,#0
-+	umull	r0,r1,$h0,$r0
-+	umlal	r2,r3,$h4,$s1
-+	umlal	r0,r1,$h3,$s1
-+	ldr	$r1,[sp,#20]		@ reload $r1
-+	umlal	r2,r3,$h2,$s3
-+	umlal	r0,r1,$h1,$s3
-+	umlal	r2,r3,$h3,$s2
-+	umlal	r0,r1,$h2,$s2
-+	umlal	r2,r3,$h0,$r1
-+	str	r0,[sp,#0]		@ future $h0
-+	 mul	r0,$s2,$h4
-+	ldr	$r2,[sp,#24]		@ reload $r2
-+	adds	r2,r2,r1		@ d1+=d0>>32
-+	 eor	r1,r1,r1
-+	adc	lr,r3,#0		@ future $h2
-+	str	r2,[sp,#4]		@ future $h1
-+
-+	mul	r2,$s3,$h4
-+	eor	r3,r3,r3
-+	umlal	r0,r1,$h3,$s3
-+	ldr	$r3,[sp,#28]		@ reload $r3
-+	umlal	r2,r3,$h3,$r0
-+	umlal	r0,r1,$h2,$r0
-+	umlal	r2,r3,$h2,$r1
-+	umlal	r0,r1,$h1,$r1
-+	umlal	r2,r3,$h1,$r2
-+	umlal	r0,r1,$h0,$r2
-+	umlal	r2,r3,$h0,$r3
-+	ldr	$h0,[sp,#0]
-+	mul	$h4,$r0,$h4
-+	ldr	$h1,[sp,#4]
-+
-+	adds	$h2,lr,r0		@ d2+=d1>>32
-+	ldr	lr,[sp,#8]		@ reload input pointer
-+	adc	r1,r1,#0
-+	adds	$h3,r2,r1		@ d3+=d2>>32
-+	ldr	r0,[sp,#16]		@ reload end pointer
-+	adc	r3,r3,#0
-+	add	$h4,$h4,r3		@ h4+=d3>>32
-+
-+	and	r1,$h4,#-4
-+	and	$h4,$h4,#3
-+	add	r1,r1,r1,lsr#2		@ *=5
-+	adds	$h0,$h0,r1
-+	adcs	$h1,$h1,#0
-+	adcs	$h2,$h2,#0
-+	adcs	$h3,$h3,#0
-+	adc	$h4,$h4,#0
-+
-+	cmp	r0,lr			@ done yet?
-+	bhi	.Loop
-+
-+	ldr	$ctx,[sp,#12]
-+	add	sp,sp,#32
-+	stmdb	$ctx,{$h0-$h4}		@ store the result
-+
-+.Lno_data:
-+#if	__ARM_ARCH__>=5
-+	ldmia	sp!,{r3-r11,pc}
-+#else
-+	ldmia	sp!,{r3-r11,lr}
-+	tst	lr,#1
-+	moveq	pc,lr			@ be binary compatible with V4, yet
-+	bx	lr			@ interoperable with Thumb ISA:-)
-+#endif
-+.size	poly1305_blocks,.-poly1305_blocks
-+___
-+}
-+{
-+my ($ctx,$mac,$nonce)=map("r$_",(0..2));
-+my ($h0,$h1,$h2,$h3,$h4,$g0,$g1,$g2,$g3)=map("r$_",(3..11));
-+my $g4=$ctx;
-+
-+$code.=<<___;
-+.type	poly1305_emit,%function
-+.align	5
-+poly1305_emit:
-+.Lpoly1305_emit:
-+	stmdb	sp!,{r4-r11}
-+
-+	ldmia	$ctx,{$h0-$h4}
-+
-+#if __ARM_ARCH__>=7
-+	ldr	ip,[$ctx,#36]		@ is_base2_26
-+
-+	adds	$g0,$h0,$h1,lsl#26	@ base 2^26 -> base 2^32
-+	mov	$g1,$h1,lsr#6
-+	adcs	$g1,$g1,$h2,lsl#20
-+	mov	$g2,$h2,lsr#12
-+	adcs	$g2,$g2,$h3,lsl#14
-+	mov	$g3,$h3,lsr#18
-+	adcs	$g3,$g3,$h4,lsl#8
-+	mov	$g4,#0
-+	adc	$g4,$g4,$h4,lsr#24
-+
-+	tst	ip,ip
-+	itttt	ne
-+	movne	$h0,$g0
-+	movne	$h1,$g1
-+	movne	$h2,$g2
-+	movne	$h3,$g3
-+	it	ne
-+	movne	$h4,$g4
-+#endif
-+
-+	adds	$g0,$h0,#5		@ compare to modulus
-+	adcs	$g1,$h1,#0
-+	adcs	$g2,$h2,#0
-+	adcs	$g3,$h3,#0
-+	adc	$g4,$h4,#0
-+	tst	$g4,#4			@ did it carry/borrow?
-+
-+#ifdef	__thumb2__
-+	it	ne
-+#endif
-+	movne	$h0,$g0
-+	ldr	$g0,[$nonce,#0]
-+#ifdef	__thumb2__
-+	it	ne
-+#endif
-+	movne	$h1,$g1
-+	ldr	$g1,[$nonce,#4]
-+#ifdef	__thumb2__
-+	it	ne
-+#endif
-+	movne	$h2,$g2
-+	ldr	$g2,[$nonce,#8]
-+#ifdef	__thumb2__
-+	it	ne
-+#endif
-+	movne	$h3,$g3
-+	ldr	$g3,[$nonce,#12]
-+
-+	adds	$h0,$h0,$g0
-+	adcs	$h1,$h1,$g1
-+	adcs	$h2,$h2,$g2
-+	adc	$h3,$h3,$g3
-+
-+#if __ARM_ARCH__>=7
-+# ifdef __ARMEB__
-+	rev	$h0,$h0
-+	rev	$h1,$h1
-+	rev	$h2,$h2
-+	rev	$h3,$h3
-+# endif
-+	str	$h0,[$mac,#0]
-+	str	$h1,[$mac,#4]
-+	str	$h2,[$mac,#8]
-+	str	$h3,[$mac,#12]
-+#else
-+	strb	$h0,[$mac,#0]
-+	mov	$h0,$h0,lsr#8
-+	strb	$h1,[$mac,#4]
-+	mov	$h1,$h1,lsr#8
-+	strb	$h2,[$mac,#8]
-+	mov	$h2,$h2,lsr#8
-+	strb	$h3,[$mac,#12]
-+	mov	$h3,$h3,lsr#8
-+
-+	strb	$h0,[$mac,#1]
-+	mov	$h0,$h0,lsr#8
-+	strb	$h1,[$mac,#5]
-+	mov	$h1,$h1,lsr#8
-+	strb	$h2,[$mac,#9]
-+	mov	$h2,$h2,lsr#8
-+	strb	$h3,[$mac,#13]
-+	mov	$h3,$h3,lsr#8
-+
-+	strb	$h0,[$mac,#2]
-+	mov	$h0,$h0,lsr#8
-+	strb	$h1,[$mac,#6]
-+	mov	$h1,$h1,lsr#8
-+	strb	$h2,[$mac,#10]
-+	mov	$h2,$h2,lsr#8
-+	strb	$h3,[$mac,#14]
-+	mov	$h3,$h3,lsr#8
-+
-+	strb	$h0,[$mac,#3]
-+	strb	$h1,[$mac,#7]
-+	strb	$h2,[$mac,#11]
-+	strb	$h3,[$mac,#15]
-+#endif
-+	ldmia	sp!,{r4-r11}
-+#if	__ARM_ARCH__>=5
-+	ret				@ bx	lr
-+#else
-+	tst	lr,#1
-+	moveq	pc,lr			@ be binary compatible with V4, yet
-+	bx	lr			@ interoperable with Thumb ISA:-)
-+#endif
-+.size	poly1305_emit,.-poly1305_emit
-+___
-+{
-+my ($R0,$R1,$S1,$R2,$S2,$R3,$S3,$R4,$S4) = map("d$_",(0..9));
-+my ($D0,$D1,$D2,$D3,$D4, $H0,$H1,$H2,$H3,$H4) = map("q$_",(5..14));
-+my ($T0,$T1,$MASK) = map("q$_",(15,4,0));
-+
-+my ($in2,$zeros,$tbl0,$tbl1) = map("r$_",(4..7));
-+
-+$code.=<<___;
-+#if	__ARM_MAX_ARCH__>=7
-+.fpu	neon
-+
-+.type	poly1305_init_neon,%function
-+.align	5
-+poly1305_init_neon:
-+.Lpoly1305_init_neon:
-+	ldr	r3,[$ctx,#48]		@ first table element
-+	cmp	r3,#-1			@ is value impossible?
-+	bne	.Lno_init_neon
-+
-+	ldr	r4,[$ctx,#20]		@ load key base 2^32
-+	ldr	r5,[$ctx,#24]
-+	ldr	r6,[$ctx,#28]
-+	ldr	r7,[$ctx,#32]
-+
-+	and	r2,r4,#0x03ffffff	@ base 2^32 -> base 2^26
-+	mov	r3,r4,lsr#26
-+	mov	r4,r5,lsr#20
-+	orr	r3,r3,r5,lsl#6
-+	mov	r5,r6,lsr#14
-+	orr	r4,r4,r6,lsl#12
-+	mov	r6,r7,lsr#8
-+	orr	r5,r5,r7,lsl#18
-+	and	r3,r3,#0x03ffffff
-+	and	r4,r4,#0x03ffffff
-+	and	r5,r5,#0x03ffffff
-+
-+	vdup.32	$R0,r2			@ r^1 in both lanes
-+	add	r2,r3,r3,lsl#2		@ *5
-+	vdup.32	$R1,r3
-+	add	r3,r4,r4,lsl#2
-+	vdup.32	$S1,r2
-+	vdup.32	$R2,r4
-+	add	r4,r5,r5,lsl#2
-+	vdup.32	$S2,r3
-+	vdup.32	$R3,r5
-+	add	r5,r6,r6,lsl#2
-+	vdup.32	$S3,r4
-+	vdup.32	$R4,r6
-+	vdup.32	$S4,r5
-+
-+	mov	$zeros,#2		@ counter
-+
-+.Lsquare_neon:
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
-+	@ d1 = h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3 + h2*5*r4
-+	@ d2 = h2*r0 + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-+	@ d3 = h3*r0 + h2*r1   + h1*r2   + h0*r3   + h4*5*r4
-+	@ d4 = h4*r0 + h3*r1   + h2*r2   + h1*r3   + h0*r4
-+
-+	vmull.u32	$D0,$R0,${R0}[1]
-+	vmull.u32	$D1,$R1,${R0}[1]
-+	vmull.u32	$D2,$R2,${R0}[1]
-+	vmull.u32	$D3,$R3,${R0}[1]
-+	vmull.u32	$D4,$R4,${R0}[1]
-+
-+	vmlal.u32	$D0,$R4,${S1}[1]
-+	vmlal.u32	$D1,$R0,${R1}[1]
-+	vmlal.u32	$D2,$R1,${R1}[1]
-+	vmlal.u32	$D3,$R2,${R1}[1]
-+	vmlal.u32	$D4,$R3,${R1}[1]
-+
-+	vmlal.u32	$D0,$R3,${S2}[1]
-+	vmlal.u32	$D1,$R4,${S2}[1]
-+	vmlal.u32	$D3,$R1,${R2}[1]
-+	vmlal.u32	$D2,$R0,${R2}[1]
-+	vmlal.u32	$D4,$R2,${R2}[1]
-+
-+	vmlal.u32	$D0,$R2,${S3}[1]
-+	vmlal.u32	$D3,$R0,${R3}[1]
-+	vmlal.u32	$D1,$R3,${S3}[1]
-+	vmlal.u32	$D2,$R4,${S3}[1]
-+	vmlal.u32	$D4,$R1,${R3}[1]
-+
-+	vmlal.u32	$D3,$R4,${S4}[1]
-+	vmlal.u32	$D0,$R1,${S4}[1]
-+	vmlal.u32	$D1,$R2,${S4}[1]
-+	vmlal.u32	$D2,$R3,${S4}[1]
-+	vmlal.u32	$D4,$R0,${R4}[1]
-+
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ lazy reduction as discussed in "NEON crypto" by D.J. Bernstein
-+	@ and P. Schwabe
-+	@
-+	@ H0>>+H1>>+H2>>+H3>>+H4
-+	@ H3>>+H4>>*5+H0>>+H1
-+	@
-+	@ Trivia.
-+	@
-+	@ Result of multiplication of n-bit number by m-bit number is
-+	@ n+m bits wide. However! Even though 2^n is a n+1-bit number,
-+	@ m-bit number multiplied by 2^n is still n+m bits wide.
-+	@
-+	@ Sum of two n-bit numbers is n+1 bits wide, sum of three - n+2,
-+	@ and so is sum of four. Sum of 2^m n-m-bit numbers and n-bit
-+	@ one is n+1 bits wide.
-+	@
-+	@ >>+ denotes Hnext += Hn>>26, Hn &= 0x3ffffff. This means that
-+	@ H0, H2, H3 are guaranteed to be 26 bits wide, while H1 and H4
-+	@ can be 27. However! In cases when their width exceeds 26 bits
-+	@ they are limited by 2^26+2^6. This in turn means that *sum*
-+	@ of the products with these values can still be viewed as sum
-+	@ of 52-bit numbers as long as the amount of addends is not a
-+	@ power of 2. For example,
-+	@
-+	@ H4 = H4*R0 + H3*R1 + H2*R2 + H1*R3 + H0 * R4,
-+	@
-+	@ which can't be larger than 5 * (2^26 + 2^6) * (2^26 + 2^6), or
-+	@ 5 * (2^52 + 2*2^32 + 2^12), which in turn is smaller than
-+	@ 8 * (2^52) or 2^55. However, the value is then multiplied by
-+	@ by 5, so we should be looking at 5 * 5 * (2^52 + 2^33 + 2^12),
-+	@ which is less than 32 * (2^52) or 2^57. And when processing
-+	@ data we are looking at triple as many addends...
-+	@
-+	@ In key setup procedure pre-reduced H0 is limited by 5*4+1 and
-+	@ 5*H4 - by 5*5 52-bit addends, or 57 bits. But when hashing the
-+	@ input H0 is limited by (5*4+1)*3 addends, or 58 bits, while
-+	@ 5*H4 by 5*5*3, or 59[!] bits. How is this relevant? vmlal.u32
-+	@ instruction accepts 2x32-bit input and writes 2x64-bit result.
-+	@ This means that result of reduction have to be compressed upon
-+	@ loop wrap-around. This can be done in the process of reduction
-+	@ to minimize amount of instructions [as well as amount of
-+	@ 128-bit instructions, which benefits low-end processors], but
-+	@ one has to watch for H2 (which is narrower than H0) and 5*H4
-+	@ not being wider than 58 bits, so that result of right shift
-+	@ by 26 bits fits in 32 bits. This is also useful on x86,
-+	@ because it allows to use paddd in place for paddq, which
-+	@ benefits Atom, where paddq is ridiculously slow.
-+
-+	vshr.u64	$T0,$D3,#26
-+	vmovn.i64	$D3#lo,$D3
-+	 vshr.u64	$T1,$D0,#26
-+	 vmovn.i64	$D0#lo,$D0
-+	vadd.i64	$D4,$D4,$T0		@ h3 -> h4
-+	vbic.i32	$D3#lo,#0xfc000000	@ &=0x03ffffff
-+	 vadd.i64	$D1,$D1,$T1		@ h0 -> h1
-+	 vbic.i32	$D0#lo,#0xfc000000
-+
-+	vshrn.u64	$T0#lo,$D4,#26
-+	vmovn.i64	$D4#lo,$D4
-+	 vshr.u64	$T1,$D1,#26
-+	 vmovn.i64	$D1#lo,$D1
-+	 vadd.i64	$D2,$D2,$T1		@ h1 -> h2
-+	vbic.i32	$D4#lo,#0xfc000000
-+	 vbic.i32	$D1#lo,#0xfc000000
-+
-+	vadd.i32	$D0#lo,$D0#lo,$T0#lo
-+	vshl.u32	$T0#lo,$T0#lo,#2
-+	 vshrn.u64	$T1#lo,$D2,#26
-+	 vmovn.i64	$D2#lo,$D2
-+	vadd.i32	$D0#lo,$D0#lo,$T0#lo	@ h4 -> h0
-+	 vadd.i32	$D3#lo,$D3#lo,$T1#lo	@ h2 -> h3
-+	 vbic.i32	$D2#lo,#0xfc000000
-+
-+	vshr.u32	$T0#lo,$D0#lo,#26
-+	vbic.i32	$D0#lo,#0xfc000000
-+	 vshr.u32	$T1#lo,$D3#lo,#26
-+	 vbic.i32	$D3#lo,#0xfc000000
-+	vadd.i32	$D1#lo,$D1#lo,$T0#lo	@ h0 -> h1
-+	 vadd.i32	$D4#lo,$D4#lo,$T1#lo	@ h3 -> h4
-+
-+	subs		$zeros,$zeros,#1
-+	beq		.Lsquare_break_neon
-+
-+	add		$tbl0,$ctx,#(48+0*9*4)
-+	add		$tbl1,$ctx,#(48+1*9*4)
-+
-+	vtrn.32		$R0,$D0#lo		@ r^2:r^1
-+	vtrn.32		$R2,$D2#lo
-+	vtrn.32		$R3,$D3#lo
-+	vtrn.32		$R1,$D1#lo
-+	vtrn.32		$R4,$D4#lo
-+
-+	vshl.u32	$S2,$R2,#2		@ *5
-+	vshl.u32	$S3,$R3,#2
-+	vshl.u32	$S1,$R1,#2
-+	vshl.u32	$S4,$R4,#2
-+	vadd.i32	$S2,$S2,$R2
-+	vadd.i32	$S1,$S1,$R1
-+	vadd.i32	$S3,$S3,$R3
-+	vadd.i32	$S4,$S4,$R4
-+
-+	vst4.32		{${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!
-+	vst4.32		{${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!
-+	vst4.32		{${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
-+	vst4.32		{${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
-+	vst1.32		{${S4}[0]},[$tbl0,:32]
-+	vst1.32		{${S4}[1]},[$tbl1,:32]
-+
-+	b		.Lsquare_neon
-+
-+.align	4
-+.Lsquare_break_neon:
-+	add		$tbl0,$ctx,#(48+2*4*9)
-+	add		$tbl1,$ctx,#(48+3*4*9)
-+
-+	vmov		$R0,$D0#lo		@ r^4:r^3
-+	vshl.u32	$S1,$D1#lo,#2		@ *5
-+	vmov		$R1,$D1#lo
-+	vshl.u32	$S2,$D2#lo,#2
-+	vmov		$R2,$D2#lo
-+	vshl.u32	$S3,$D3#lo,#2
-+	vmov		$R3,$D3#lo
-+	vshl.u32	$S4,$D4#lo,#2
-+	vmov		$R4,$D4#lo
-+	vadd.i32	$S1,$S1,$D1#lo
-+	vadd.i32	$S2,$S2,$D2#lo
-+	vadd.i32	$S3,$S3,$D3#lo
-+	vadd.i32	$S4,$S4,$D4#lo
-+
-+	vst4.32		{${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!
-+	vst4.32		{${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!
-+	vst4.32		{${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
-+	vst4.32		{${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
-+	vst1.32		{${S4}[0]},[$tbl0]
-+	vst1.32		{${S4}[1]},[$tbl1]
-+
-+.Lno_init_neon:
-+	ret				@ bx	lr
-+.size	poly1305_init_neon,.-poly1305_init_neon
-+
-+.type	poly1305_blocks_neon,%function
-+.align	5
-+poly1305_blocks_neon:
-+.Lpoly1305_blocks_neon:
-+	ldr	ip,[$ctx,#36]		@ is_base2_26
-+
-+	cmp	$len,#64
-+	blo	.Lpoly1305_blocks
-+
-+	stmdb	sp!,{r4-r7}
-+	vstmdb	sp!,{d8-d15}		@ ABI specification says so
-+
-+	tst	ip,ip			@ is_base2_26?
-+	bne	.Lbase2_26_neon
-+
-+	stmdb	sp!,{r1-r3,lr}
-+	bl	.Lpoly1305_init_neon
-+
-+	ldr	r4,[$ctx,#0]		@ load hash value base 2^32
-+	ldr	r5,[$ctx,#4]
-+	ldr	r6,[$ctx,#8]
-+	ldr	r7,[$ctx,#12]
-+	ldr	ip,[$ctx,#16]
-+
-+	and	r2,r4,#0x03ffffff	@ base 2^32 -> base 2^26
-+	mov	r3,r4,lsr#26
-+	 veor	$D0#lo,$D0#lo,$D0#lo
-+	mov	r4,r5,lsr#20
-+	orr	r3,r3,r5,lsl#6
-+	 veor	$D1#lo,$D1#lo,$D1#lo
-+	mov	r5,r6,lsr#14
-+	orr	r4,r4,r6,lsl#12
-+	 veor	$D2#lo,$D2#lo,$D2#lo
-+	mov	r6,r7,lsr#8
-+	orr	r5,r5,r7,lsl#18
-+	 veor	$D3#lo,$D3#lo,$D3#lo
-+	and	r3,r3,#0x03ffffff
-+	orr	r6,r6,ip,lsl#24
-+	 veor	$D4#lo,$D4#lo,$D4#lo
-+	and	r4,r4,#0x03ffffff
-+	mov	r1,#1
-+	and	r5,r5,#0x03ffffff
-+	str	r1,[$ctx,#36]		@ set is_base2_26
-+
-+	vmov.32	$D0#lo[0],r2
-+	vmov.32	$D1#lo[0],r3
-+	vmov.32	$D2#lo[0],r4
-+	vmov.32	$D3#lo[0],r5
-+	vmov.32	$D4#lo[0],r6
-+	adr	$zeros,.Lzeros
-+
-+	ldmia	sp!,{r1-r3,lr}
-+	b	.Lhash_loaded
-+
-+.align	4
-+.Lbase2_26_neon:
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ load hash value
-+
-+	veor		$D0#lo,$D0#lo,$D0#lo
-+	veor		$D1#lo,$D1#lo,$D1#lo
-+	veor		$D2#lo,$D2#lo,$D2#lo
-+	veor		$D3#lo,$D3#lo,$D3#lo
-+	veor		$D4#lo,$D4#lo,$D4#lo
-+	vld4.32		{$D0#lo[0],$D1#lo[0],$D2#lo[0],$D3#lo[0]},[$ctx]!
-+	adr		$zeros,.Lzeros
-+	vld1.32		{$D4#lo[0]},[$ctx]
-+	sub		$ctx,$ctx,#16		@ rewind
-+
-+.Lhash_loaded:
-+	add		$in2,$inp,#32
-+	mov		$padbit,$padbit,lsl#24
-+	tst		$len,#31
-+	beq		.Leven
-+
-+	vld4.32		{$H0#lo[0],$H1#lo[0],$H2#lo[0],$H3#lo[0]},[$inp]!
-+	vmov.32		$H4#lo[0],$padbit
-+	sub		$len,$len,#16
-+	add		$in2,$inp,#32
-+
-+# ifdef	__ARMEB__
-+	vrev32.8	$H0,$H0
-+	vrev32.8	$H3,$H3
-+	vrev32.8	$H1,$H1
-+	vrev32.8	$H2,$H2
-+# endif
-+	vsri.u32	$H4#lo,$H3#lo,#8	@ base 2^32 -> base 2^26
-+	vshl.u32	$H3#lo,$H3#lo,#18
-+
-+	vsri.u32	$H3#lo,$H2#lo,#14
-+	vshl.u32	$H2#lo,$H2#lo,#12
-+	vadd.i32	$H4#hi,$H4#lo,$D4#lo	@ add hash value and move to #hi
-+
-+	vbic.i32	$H3#lo,#0xfc000000
-+	vsri.u32	$H2#lo,$H1#lo,#20
-+	vshl.u32	$H1#lo,$H1#lo,#6
-+
-+	vbic.i32	$H2#lo,#0xfc000000
-+	vsri.u32	$H1#lo,$H0#lo,#26
-+	vadd.i32	$H3#hi,$H3#lo,$D3#lo
-+
-+	vbic.i32	$H0#lo,#0xfc000000
-+	vbic.i32	$H1#lo,#0xfc000000
-+	vadd.i32	$H2#hi,$H2#lo,$D2#lo
-+
-+	vadd.i32	$H0#hi,$H0#lo,$D0#lo
-+	vadd.i32	$H1#hi,$H1#lo,$D1#lo
-+
-+	mov		$tbl1,$zeros
-+	add		$tbl0,$ctx,#48
-+
-+	cmp		$len,$len
-+	b		.Long_tail
-+
-+.align	4
-+.Leven:
-+	subs		$len,$len,#64
-+	it		lo
-+	movlo		$in2,$zeros
-+
-+	vmov.i32	$H4,#1<<24		@ padbit, yes, always
-+	vld4.32		{$H0#lo,$H1#lo,$H2#lo,$H3#lo},[$inp]	@ inp[0:1]
-+	add		$inp,$inp,#64
-+	vld4.32		{$H0#hi,$H1#hi,$H2#hi,$H3#hi},[$in2]	@ inp[2:3] (or 0)
-+	add		$in2,$in2,#64
-+	itt		hi
-+	addhi		$tbl1,$ctx,#(48+1*9*4)
-+	addhi		$tbl0,$ctx,#(48+3*9*4)
-+
-+# ifdef	__ARMEB__
-+	vrev32.8	$H0,$H0
-+	vrev32.8	$H3,$H3
-+	vrev32.8	$H1,$H1
-+	vrev32.8	$H2,$H2
-+# endif
-+	vsri.u32	$H4,$H3,#8		@ base 2^32 -> base 2^26
-+	vshl.u32	$H3,$H3,#18
-+
-+	vsri.u32	$H3,$H2,#14
-+	vshl.u32	$H2,$H2,#12
-+
-+	vbic.i32	$H3,#0xfc000000
-+	vsri.u32	$H2,$H1,#20
-+	vshl.u32	$H1,$H1,#6
-+
-+	vbic.i32	$H2,#0xfc000000
-+	vsri.u32	$H1,$H0,#26
-+
-+	vbic.i32	$H0,#0xfc000000
-+	vbic.i32	$H1,#0xfc000000
-+
-+	bls		.Lskip_loop
-+
-+	vld4.32		{${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!	@ load r^2
-+	vld4.32		{${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!	@ load r^4
-+	vld4.32		{${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
-+	vld4.32		{${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
-+	b		.Loop_neon
-+
-+.align	5
-+.Loop_neon:
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2
-+	@ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r
-+	@   \___________________/
-+	@ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2
-+	@ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r
-+	@   \___________________/ \____________________/
-+	@
-+	@ Note that we start with inp[2:3]*r^2. This is because it
-+	@ doesn't depend on reduction in previous iteration.
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ d4 = h4*r0 + h3*r1   + h2*r2   + h1*r3   + h0*r4
-+	@ d3 = h3*r0 + h2*r1   + h1*r2   + h0*r3   + h4*5*r4
-+	@ d2 = h2*r0 + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-+	@ d1 = h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3 + h2*5*r4
-+	@ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
-+
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ inp[2:3]*r^2
-+
-+	vadd.i32	$H2#lo,$H2#lo,$D2#lo	@ accumulate inp[0:1]
-+	vmull.u32	$D2,$H2#hi,${R0}[1]
-+	vadd.i32	$H0#lo,$H0#lo,$D0#lo
-+	vmull.u32	$D0,$H0#hi,${R0}[1]
-+	vadd.i32	$H3#lo,$H3#lo,$D3#lo
-+	vmull.u32	$D3,$H3#hi,${R0}[1]
-+	vmlal.u32	$D2,$H1#hi,${R1}[1]
-+	vadd.i32	$H1#lo,$H1#lo,$D1#lo
-+	vmull.u32	$D1,$H1#hi,${R0}[1]
-+
-+	vadd.i32	$H4#lo,$H4#lo,$D4#lo
-+	vmull.u32	$D4,$H4#hi,${R0}[1]
-+	subs		$len,$len,#64
-+	vmlal.u32	$D0,$H4#hi,${S1}[1]
-+	it		lo
-+	movlo		$in2,$zeros
-+	vmlal.u32	$D3,$H2#hi,${R1}[1]
-+	vld1.32		${S4}[1],[$tbl1,:32]
-+	vmlal.u32	$D1,$H0#hi,${R1}[1]
-+	vmlal.u32	$D4,$H3#hi,${R1}[1]
-+
-+	vmlal.u32	$D0,$H3#hi,${S2}[1]
-+	vmlal.u32	$D3,$H1#hi,${R2}[1]
-+	vmlal.u32	$D4,$H2#hi,${R2}[1]
-+	vmlal.u32	$D1,$H4#hi,${S2}[1]
-+	vmlal.u32	$D2,$H0#hi,${R2}[1]
-+
-+	vmlal.u32	$D3,$H0#hi,${R3}[1]
-+	vmlal.u32	$D0,$H2#hi,${S3}[1]
-+	vmlal.u32	$D4,$H1#hi,${R3}[1]
-+	vmlal.u32	$D1,$H3#hi,${S3}[1]
-+	vmlal.u32	$D2,$H4#hi,${S3}[1]
-+
-+	vmlal.u32	$D3,$H4#hi,${S4}[1]
-+	vmlal.u32	$D0,$H1#hi,${S4}[1]
-+	vmlal.u32	$D4,$H0#hi,${R4}[1]
-+	vmlal.u32	$D1,$H2#hi,${S4}[1]
-+	vmlal.u32	$D2,$H3#hi,${S4}[1]
-+
-+	vld4.32		{$H0#hi,$H1#hi,$H2#hi,$H3#hi},[$in2]	@ inp[2:3] (or 0)
-+	add		$in2,$in2,#64
-+
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ (hash+inp[0:1])*r^4 and accumulate
-+
-+	vmlal.u32	$D3,$H3#lo,${R0}[0]
-+	vmlal.u32	$D0,$H0#lo,${R0}[0]
-+	vmlal.u32	$D4,$H4#lo,${R0}[0]
-+	vmlal.u32	$D1,$H1#lo,${R0}[0]
-+	vmlal.u32	$D2,$H2#lo,${R0}[0]
-+	vld1.32		${S4}[0],[$tbl0,:32]
-+
-+	vmlal.u32	$D3,$H2#lo,${R1}[0]
-+	vmlal.u32	$D0,$H4#lo,${S1}[0]
-+	vmlal.u32	$D4,$H3#lo,${R1}[0]
-+	vmlal.u32	$D1,$H0#lo,${R1}[0]
-+	vmlal.u32	$D2,$H1#lo,${R1}[0]
-+
-+	vmlal.u32	$D3,$H1#lo,${R2}[0]
-+	vmlal.u32	$D0,$H3#lo,${S2}[0]
-+	vmlal.u32	$D4,$H2#lo,${R2}[0]
-+	vmlal.u32	$D1,$H4#lo,${S2}[0]
-+	vmlal.u32	$D2,$H0#lo,${R2}[0]
-+
-+	vmlal.u32	$D3,$H0#lo,${R3}[0]
-+	vmlal.u32	$D0,$H2#lo,${S3}[0]
-+	vmlal.u32	$D4,$H1#lo,${R3}[0]
-+	vmlal.u32	$D1,$H3#lo,${S3}[0]
-+	vmlal.u32	$D3,$H4#lo,${S4}[0]
-+
-+	vmlal.u32	$D2,$H4#lo,${S3}[0]
-+	vmlal.u32	$D0,$H1#lo,${S4}[0]
-+	vmlal.u32	$D4,$H0#lo,${R4}[0]
-+	vmov.i32	$H4,#1<<24		@ padbit, yes, always
-+	vmlal.u32	$D1,$H2#lo,${S4}[0]
-+	vmlal.u32	$D2,$H3#lo,${S4}[0]
-+
-+	vld4.32		{$H0#lo,$H1#lo,$H2#lo,$H3#lo},[$inp]	@ inp[0:1]
-+	add		$inp,$inp,#64
-+# ifdef	__ARMEB__
-+	vrev32.8	$H0,$H0
-+	vrev32.8	$H1,$H1
-+	vrev32.8	$H2,$H2
-+	vrev32.8	$H3,$H3
-+# endif
-+
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ lazy reduction interleaved with base 2^32 -> base 2^26 of
-+	@ inp[0:3] previously loaded to $H0-$H3 and smashed to $H0-$H4.
-+
-+	vshr.u64	$T0,$D3,#26
-+	vmovn.i64	$D3#lo,$D3
-+	 vshr.u64	$T1,$D0,#26
-+	 vmovn.i64	$D0#lo,$D0
-+	vadd.i64	$D4,$D4,$T0		@ h3 -> h4
-+	vbic.i32	$D3#lo,#0xfc000000
-+	  vsri.u32	$H4,$H3,#8		@ base 2^32 -> base 2^26
-+	 vadd.i64	$D1,$D1,$T1		@ h0 -> h1
-+	  vshl.u32	$H3,$H3,#18
-+	 vbic.i32	$D0#lo,#0xfc000000
-+
-+	vshrn.u64	$T0#lo,$D4,#26
-+	vmovn.i64	$D4#lo,$D4
-+	 vshr.u64	$T1,$D1,#26
-+	 vmovn.i64	$D1#lo,$D1
-+	 vadd.i64	$D2,$D2,$T1		@ h1 -> h2
-+	  vsri.u32	$H3,$H2,#14
-+	vbic.i32	$D4#lo,#0xfc000000
-+	  vshl.u32	$H2,$H2,#12
-+	 vbic.i32	$D1#lo,#0xfc000000
-+
-+	vadd.i32	$D0#lo,$D0#lo,$T0#lo
-+	vshl.u32	$T0#lo,$T0#lo,#2
-+	  vbic.i32	$H3,#0xfc000000
-+	 vshrn.u64	$T1#lo,$D2,#26
-+	 vmovn.i64	$D2#lo,$D2
-+	vaddl.u32	$D0,$D0#lo,$T0#lo	@ h4 -> h0 [widen for a sec]
-+	  vsri.u32	$H2,$H1,#20
-+	 vadd.i32	$D3#lo,$D3#lo,$T1#lo	@ h2 -> h3
-+	  vshl.u32	$H1,$H1,#6
-+	 vbic.i32	$D2#lo,#0xfc000000
-+	  vbic.i32	$H2,#0xfc000000
-+
-+	vshrn.u64	$T0#lo,$D0,#26		@ re-narrow
-+	vmovn.i64	$D0#lo,$D0
-+	  vsri.u32	$H1,$H0,#26
-+	  vbic.i32	$H0,#0xfc000000
-+	 vshr.u32	$T1#lo,$D3#lo,#26
-+	 vbic.i32	$D3#lo,#0xfc000000
-+	vbic.i32	$D0#lo,#0xfc000000
-+	vadd.i32	$D1#lo,$D1#lo,$T0#lo	@ h0 -> h1
-+	 vadd.i32	$D4#lo,$D4#lo,$T1#lo	@ h3 -> h4
-+	  vbic.i32	$H1,#0xfc000000
-+
-+	bhi		.Loop_neon
-+
-+.Lskip_loop:
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1
-+
-+	add		$tbl1,$ctx,#(48+0*9*4)
-+	add		$tbl0,$ctx,#(48+1*9*4)
-+	adds		$len,$len,#32
-+	it		ne
-+	movne		$len,#0
-+	bne		.Long_tail
-+
-+	vadd.i32	$H2#hi,$H2#lo,$D2#lo	@ add hash value and move to #hi
-+	vadd.i32	$H0#hi,$H0#lo,$D0#lo
-+	vadd.i32	$H3#hi,$H3#lo,$D3#lo
-+	vadd.i32	$H1#hi,$H1#lo,$D1#lo
-+	vadd.i32	$H4#hi,$H4#lo,$D4#lo
-+
-+.Long_tail:
-+	vld4.32		{${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!	@ load r^1
-+	vld4.32		{${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!	@ load r^2
-+
-+	vadd.i32	$H2#lo,$H2#lo,$D2#lo	@ can be redundant
-+	vmull.u32	$D2,$H2#hi,$R0
-+	vadd.i32	$H0#lo,$H0#lo,$D0#lo
-+	vmull.u32	$D0,$H0#hi,$R0
-+	vadd.i32	$H3#lo,$H3#lo,$D3#lo
-+	vmull.u32	$D3,$H3#hi,$R0
-+	vadd.i32	$H1#lo,$H1#lo,$D1#lo
-+	vmull.u32	$D1,$H1#hi,$R0
-+	vadd.i32	$H4#lo,$H4#lo,$D4#lo
-+	vmull.u32	$D4,$H4#hi,$R0
-+
-+	vmlal.u32	$D0,$H4#hi,$S1
-+	vld4.32		{${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
-+	vmlal.u32	$D3,$H2#hi,$R1
-+	vld4.32		{${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
-+	vmlal.u32	$D1,$H0#hi,$R1
-+	vmlal.u32	$D4,$H3#hi,$R1
-+	vmlal.u32	$D2,$H1#hi,$R1
-+
-+	vmlal.u32	$D3,$H1#hi,$R2
-+	vld1.32		${S4}[1],[$tbl1,:32]
-+	vmlal.u32	$D0,$H3#hi,$S2
-+	vld1.32		${S4}[0],[$tbl0,:32]
-+	vmlal.u32	$D4,$H2#hi,$R2
-+	vmlal.u32	$D1,$H4#hi,$S2
-+	vmlal.u32	$D2,$H0#hi,$R2
-+
-+	vmlal.u32	$D3,$H0#hi,$R3
-+	 it		ne
-+	 addne		$tbl1,$ctx,#(48+2*9*4)
-+	vmlal.u32	$D0,$H2#hi,$S3
-+	 it		ne
-+	 addne		$tbl0,$ctx,#(48+3*9*4)
-+	vmlal.u32	$D4,$H1#hi,$R3
-+	vmlal.u32	$D1,$H3#hi,$S3
-+	vmlal.u32	$D2,$H4#hi,$S3
-+
-+	vmlal.u32	$D3,$H4#hi,$S4
-+	 vorn		$MASK,$MASK,$MASK	@ all-ones, can be redundant
-+	vmlal.u32	$D0,$H1#hi,$S4
-+	 vshr.u64	$MASK,$MASK,#38
-+	vmlal.u32	$D4,$H0#hi,$R4
-+	vmlal.u32	$D1,$H2#hi,$S4
-+	vmlal.u32	$D2,$H3#hi,$S4
-+
-+	beq		.Lshort_tail
-+
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ (hash+inp[0:1])*r^4:r^3 and accumulate
-+
-+	vld4.32		{${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!	@ load r^3
-+	vld4.32		{${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!	@ load r^4
-+
-+	vmlal.u32	$D2,$H2#lo,$R0
-+	vmlal.u32	$D0,$H0#lo,$R0
-+	vmlal.u32	$D3,$H3#lo,$R0
-+	vmlal.u32	$D1,$H1#lo,$R0
-+	vmlal.u32	$D4,$H4#lo,$R0
-+
-+	vmlal.u32	$D0,$H4#lo,$S1
-+	vld4.32		{${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
-+	vmlal.u32	$D3,$H2#lo,$R1
-+	vld4.32		{${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
-+	vmlal.u32	$D1,$H0#lo,$R1
-+	vmlal.u32	$D4,$H3#lo,$R1
-+	vmlal.u32	$D2,$H1#lo,$R1
-+
-+	vmlal.u32	$D3,$H1#lo,$R2
-+	vld1.32		${S4}[1],[$tbl1,:32]
-+	vmlal.u32	$D0,$H3#lo,$S2
-+	vld1.32		${S4}[0],[$tbl0,:32]
-+	vmlal.u32	$D4,$H2#lo,$R2
-+	vmlal.u32	$D1,$H4#lo,$S2
-+	vmlal.u32	$D2,$H0#lo,$R2
-+
-+	vmlal.u32	$D3,$H0#lo,$R3
-+	vmlal.u32	$D0,$H2#lo,$S3
-+	vmlal.u32	$D4,$H1#lo,$R3
-+	vmlal.u32	$D1,$H3#lo,$S3
-+	vmlal.u32	$D2,$H4#lo,$S3
-+
-+	vmlal.u32	$D3,$H4#lo,$S4
-+	 vorn		$MASK,$MASK,$MASK	@ all-ones
-+	vmlal.u32	$D0,$H1#lo,$S4
-+	 vshr.u64	$MASK,$MASK,#38
-+	vmlal.u32	$D4,$H0#lo,$R4
-+	vmlal.u32	$D1,$H2#lo,$S4
-+	vmlal.u32	$D2,$H3#lo,$S4
-+
-+.Lshort_tail:
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ horizontal addition
-+
-+	vadd.i64	$D3#lo,$D3#lo,$D3#hi
-+	vadd.i64	$D0#lo,$D0#lo,$D0#hi
-+	vadd.i64	$D4#lo,$D4#lo,$D4#hi
-+	vadd.i64	$D1#lo,$D1#lo,$D1#hi
-+	vadd.i64	$D2#lo,$D2#lo,$D2#hi
-+
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ lazy reduction, but without narrowing
-+
-+	vshr.u64	$T0,$D3,#26
-+	vand.i64	$D3,$D3,$MASK
-+	 vshr.u64	$T1,$D0,#26
-+	 vand.i64	$D0,$D0,$MASK
-+	vadd.i64	$D4,$D4,$T0		@ h3 -> h4
-+	 vadd.i64	$D1,$D1,$T1		@ h0 -> h1
-+
-+	vshr.u64	$T0,$D4,#26
-+	vand.i64	$D4,$D4,$MASK
-+	 vshr.u64	$T1,$D1,#26
-+	 vand.i64	$D1,$D1,$MASK
-+	 vadd.i64	$D2,$D2,$T1		@ h1 -> h2
-+
-+	vadd.i64	$D0,$D0,$T0
-+	vshl.u64	$T0,$T0,#2
-+	 vshr.u64	$T1,$D2,#26
-+	 vand.i64	$D2,$D2,$MASK
-+	vadd.i64	$D0,$D0,$T0		@ h4 -> h0
-+	 vadd.i64	$D3,$D3,$T1		@ h2 -> h3
-+
-+	vshr.u64	$T0,$D0,#26
-+	vand.i64	$D0,$D0,$MASK
-+	 vshr.u64	$T1,$D3,#26
-+	 vand.i64	$D3,$D3,$MASK
-+	vadd.i64	$D1,$D1,$T0		@ h0 -> h1
-+	 vadd.i64	$D4,$D4,$T1		@ h3 -> h4
-+
-+	cmp		$len,#0
-+	bne		.Leven
-+
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ store hash value
-+
-+	vst4.32		{$D0#lo[0],$D1#lo[0],$D2#lo[0],$D3#lo[0]},[$ctx]!
-+	vst1.32		{$D4#lo[0]},[$ctx]
-+
-+	vldmia	sp!,{d8-d15}			@ epilogue
-+	ldmia	sp!,{r4-r7}
-+	ret					@ bx	lr
-+.size	poly1305_blocks_neon,.-poly1305_blocks_neon
-+
-+.align	5
-+.Lzeros:
-+.long	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-+#ifndef	__KERNEL__
-+.LOPENSSL_armcap:
-+# ifdef	_WIN32
-+.word	OPENSSL_armcap_P
-+# else
-+.word	OPENSSL_armcap_P-.Lpoly1305_init
-+# endif
-+.comm	OPENSSL_armcap_P,4,4
-+.hidden	OPENSSL_armcap_P
-+#endif
-+#endif
-+___
-+}	}
-+$code.=<<___;
-+.asciz	"Poly1305 for ARMv4/NEON, CRYPTOGAMS by \@dot-asm"
-+.align	2
-+___
-+
-+foreach (split("\n",$code)) {
-+	s/\`([^\`]*)\`/eval $1/geo;
-+
-+	s/\bq([0-9]+)#(lo|hi)/sprintf "d%d",2*$1+($2 eq "hi")/geo	or
-+	s/\bret\b/bx	lr/go						or
-+	s/\bbx\s+lr\b/.word\t0xe12fff1e/go;	# make it possible to compile with -march=armv4
-+
-+	print $_,"\n";
-+}
-+close STDOUT; # enforce flush
---- /dev/null
-+++ b/arch/arm/crypto/poly1305-core.S_shipped
-@@ -0,0 +1,1158 @@
-+#ifndef	__KERNEL__
-+# include "arm_arch.h"
-+#else
-+# define __ARM_ARCH__ __LINUX_ARM_ARCH__
-+# define __ARM_MAX_ARCH__ __LINUX_ARM_ARCH__
-+# define poly1305_init   poly1305_init_arm
-+# define poly1305_blocks poly1305_blocks_arm
-+# define poly1305_emit   poly1305_emit_arm
-+.globl	poly1305_blocks_neon
-+#endif
-+
-+#if defined(__thumb2__)
-+.syntax	unified
-+.thumb
-+#else
-+.code	32
-+#endif
-+
-+.text
-+
-+.globl	poly1305_emit
-+.globl	poly1305_blocks
-+.globl	poly1305_init
-+.type	poly1305_init,%function
-+.align	5
-+poly1305_init:
-+.Lpoly1305_init:
-+	stmdb	sp!,{r4-r11}
-+
-+	eor	r3,r3,r3
-+	cmp	r1,#0
-+	str	r3,[r0,#0]		@ zero hash value
-+	str	r3,[r0,#4]
-+	str	r3,[r0,#8]
-+	str	r3,[r0,#12]
-+	str	r3,[r0,#16]
-+	str	r3,[r0,#36]		@ clear is_base2_26
-+	add	r0,r0,#20
-+
-+#ifdef	__thumb2__
-+	it	eq
-+#endif
-+	moveq	r0,#0
-+	beq	.Lno_key
-+
-+#if	__ARM_MAX_ARCH__>=7
-+	mov	r3,#-1
-+	str	r3,[r0,#28]		@ impossible key power value
-+# ifndef __KERNEL__
-+	adr	r11,.Lpoly1305_init
-+	ldr	r12,.LOPENSSL_armcap
-+# endif
-+#endif
-+	ldrb	r4,[r1,#0]
-+	mov	r10,#0x0fffffff
-+	ldrb	r5,[r1,#1]
-+	and	r3,r10,#-4		@ 0x0ffffffc
-+	ldrb	r6,[r1,#2]
-+	ldrb	r7,[r1,#3]
-+	orr	r4,r4,r5,lsl#8
-+	ldrb	r5,[r1,#4]
-+	orr	r4,r4,r6,lsl#16
-+	ldrb	r6,[r1,#5]
-+	orr	r4,r4,r7,lsl#24
-+	ldrb	r7,[r1,#6]
-+	and	r4,r4,r10
-+
-+#if	__ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-+# if !defined(_WIN32)
-+	ldr	r12,[r11,r12]		@ OPENSSL_armcap_P
-+# endif
-+# if defined(__APPLE__) || defined(_WIN32)
-+	ldr	r12,[r12]
-+# endif
-+#endif
-+	ldrb	r8,[r1,#7]
-+	orr	r5,r5,r6,lsl#8
-+	ldrb	r6,[r1,#8]
-+	orr	r5,r5,r7,lsl#16
-+	ldrb	r7,[r1,#9]
-+	orr	r5,r5,r8,lsl#24
-+	ldrb	r8,[r1,#10]
-+	and	r5,r5,r3
-+
-+#if	__ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-+	tst	r12,#ARMV7_NEON		@ check for NEON
-+# ifdef	__thumb2__
-+	adr	r9,.Lpoly1305_blocks_neon
-+	adr	r11,.Lpoly1305_blocks
-+	it	ne
-+	movne	r11,r9
-+	adr	r12,.Lpoly1305_emit
-+	orr	r11,r11,#1		@ thumb-ify addresses
-+	orr	r12,r12,#1
-+# else
-+	add	r12,r11,#(.Lpoly1305_emit-.Lpoly1305_init)
-+	ite	eq
-+	addeq	r11,r11,#(.Lpoly1305_blocks-.Lpoly1305_init)
-+	addne	r11,r11,#(.Lpoly1305_blocks_neon-.Lpoly1305_init)
-+# endif
-+#endif
-+	ldrb	r9,[r1,#11]
-+	orr	r6,r6,r7,lsl#8
-+	ldrb	r7,[r1,#12]
-+	orr	r6,r6,r8,lsl#16
-+	ldrb	r8,[r1,#13]
-+	orr	r6,r6,r9,lsl#24
-+	ldrb	r9,[r1,#14]
-+	and	r6,r6,r3
-+
-+	ldrb	r10,[r1,#15]
-+	orr	r7,r7,r8,lsl#8
-+	str	r4,[r0,#0]
-+	orr	r7,r7,r9,lsl#16
-+	str	r5,[r0,#4]
-+	orr	r7,r7,r10,lsl#24
-+	str	r6,[r0,#8]
-+	and	r7,r7,r3
-+	str	r7,[r0,#12]
-+#if	__ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-+	stmia	r2,{r11,r12}		@ fill functions table
-+	mov	r0,#1
-+#else
-+	mov	r0,#0
-+#endif
-+.Lno_key:
-+	ldmia	sp!,{r4-r11}
-+#if	__ARM_ARCH__>=5
-+	bx	lr				@ bx	lr
-+#else
-+	tst	lr,#1
-+	moveq	pc,lr			@ be binary compatible with V4, yet
-+	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
-+#endif
-+.size	poly1305_init,.-poly1305_init
-+.type	poly1305_blocks,%function
-+.align	5
-+poly1305_blocks:
-+.Lpoly1305_blocks:
-+	stmdb	sp!,{r3-r11,lr}
-+
-+	ands	r2,r2,#-16
-+	beq	.Lno_data
-+
-+	add	r2,r2,r1		@ end pointer
-+	sub	sp,sp,#32
-+
-+#if __ARM_ARCH__<7
-+	ldmia	r0,{r4-r12}		@ load context
-+	add	r0,r0,#20
-+	str	r2,[sp,#16]		@ offload stuff
-+	str	r0,[sp,#12]
-+#else
-+	ldr	lr,[r0,#36]		@ is_base2_26
-+	ldmia	r0!,{r4-r8}		@ load hash value
-+	str	r2,[sp,#16]		@ offload stuff
-+	str	r0,[sp,#12]
-+
-+	adds	r9,r4,r5,lsl#26	@ base 2^26 -> base 2^32
-+	mov	r10,r5,lsr#6
-+	adcs	r10,r10,r6,lsl#20
-+	mov	r11,r6,lsr#12
-+	adcs	r11,r11,r7,lsl#14
-+	mov	r12,r7,lsr#18
-+	adcs	r12,r12,r8,lsl#8
-+	mov	r2,#0
-+	teq	lr,#0
-+	str	r2,[r0,#16]		@ clear is_base2_26
-+	adc	r2,r2,r8,lsr#24
-+
-+	itttt	ne
-+	movne	r4,r9			@ choose between radixes
-+	movne	r5,r10
-+	movne	r6,r11
-+	movne	r7,r12
-+	ldmia	r0,{r9-r12}		@ load key
-+	it	ne
-+	movne	r8,r2
-+#endif
-+
-+	mov	lr,r1
-+	cmp	r3,#0
-+	str	r10,[sp,#20]
-+	str	r11,[sp,#24]
-+	str	r12,[sp,#28]
-+	b	.Loop
-+
-+.align	4
-+.Loop:
-+#if __ARM_ARCH__<7
-+	ldrb	r0,[lr],#16		@ load input
-+# ifdef	__thumb2__
-+	it	hi
-+# endif
-+	addhi	r8,r8,#1		@ 1<<128
-+	ldrb	r1,[lr,#-15]
-+	ldrb	r2,[lr,#-14]
-+	ldrb	r3,[lr,#-13]
-+	orr	r1,r0,r1,lsl#8
-+	ldrb	r0,[lr,#-12]
-+	orr	r2,r1,r2,lsl#16
-+	ldrb	r1,[lr,#-11]
-+	orr	r3,r2,r3,lsl#24
-+	ldrb	r2,[lr,#-10]
-+	adds	r4,r4,r3		@ accumulate input
-+
-+	ldrb	r3,[lr,#-9]
-+	orr	r1,r0,r1,lsl#8
-+	ldrb	r0,[lr,#-8]
-+	orr	r2,r1,r2,lsl#16
-+	ldrb	r1,[lr,#-7]
-+	orr	r3,r2,r3,lsl#24
-+	ldrb	r2,[lr,#-6]
-+	adcs	r5,r5,r3
-+
-+	ldrb	r3,[lr,#-5]
-+	orr	r1,r0,r1,lsl#8
-+	ldrb	r0,[lr,#-4]
-+	orr	r2,r1,r2,lsl#16
-+	ldrb	r1,[lr,#-3]
-+	orr	r3,r2,r3,lsl#24
-+	ldrb	r2,[lr,#-2]
-+	adcs	r6,r6,r3
-+
-+	ldrb	r3,[lr,#-1]
-+	orr	r1,r0,r1,lsl#8
-+	str	lr,[sp,#8]		@ offload input pointer
-+	orr	r2,r1,r2,lsl#16
-+	add	r10,r10,r10,lsr#2
-+	orr	r3,r2,r3,lsl#24
-+#else
-+	ldr	r0,[lr],#16		@ load input
-+	it	hi
-+	addhi	r8,r8,#1		@ padbit
-+	ldr	r1,[lr,#-12]
-+	ldr	r2,[lr,#-8]
-+	ldr	r3,[lr,#-4]
-+# ifdef	__ARMEB__
-+	rev	r0,r0
-+	rev	r1,r1
-+	rev	r2,r2
-+	rev	r3,r3
-+# endif
-+	adds	r4,r4,r0		@ accumulate input
-+	str	lr,[sp,#8]		@ offload input pointer
-+	adcs	r5,r5,r1
-+	add	r10,r10,r10,lsr#2
-+	adcs	r6,r6,r2
-+#endif
-+	add	r11,r11,r11,lsr#2
-+	adcs	r7,r7,r3
-+	add	r12,r12,r12,lsr#2
-+
-+	umull	r2,r3,r5,r9
-+	 adc	r8,r8,#0
-+	umull	r0,r1,r4,r9
-+	umlal	r2,r3,r8,r10
-+	umlal	r0,r1,r7,r10
-+	ldr	r10,[sp,#20]		@ reload r10
-+	umlal	r2,r3,r6,r12
-+	umlal	r0,r1,r5,r12
-+	umlal	r2,r3,r7,r11
-+	umlal	r0,r1,r6,r11
-+	umlal	r2,r3,r4,r10
-+	str	r0,[sp,#0]		@ future r4
-+	 mul	r0,r11,r8
-+	ldr	r11,[sp,#24]		@ reload r11
-+	adds	r2,r2,r1		@ d1+=d0>>32
-+	 eor	r1,r1,r1
-+	adc	lr,r3,#0		@ future r6
-+	str	r2,[sp,#4]		@ future r5
-+
-+	mul	r2,r12,r8
-+	eor	r3,r3,r3
-+	umlal	r0,r1,r7,r12
-+	ldr	r12,[sp,#28]		@ reload r12
-+	umlal	r2,r3,r7,r9
-+	umlal	r0,r1,r6,r9
-+	umlal	r2,r3,r6,r10
-+	umlal	r0,r1,r5,r10
-+	umlal	r2,r3,r5,r11
-+	umlal	r0,r1,r4,r11
-+	umlal	r2,r3,r4,r12
-+	ldr	r4,[sp,#0]
-+	mul	r8,r9,r8
-+	ldr	r5,[sp,#4]
-+
-+	adds	r6,lr,r0		@ d2+=d1>>32
-+	ldr	lr,[sp,#8]		@ reload input pointer
-+	adc	r1,r1,#0
-+	adds	r7,r2,r1		@ d3+=d2>>32
-+	ldr	r0,[sp,#16]		@ reload end pointer
-+	adc	r3,r3,#0
-+	add	r8,r8,r3		@ h4+=d3>>32
-+
-+	and	r1,r8,#-4
-+	and	r8,r8,#3
-+	add	r1,r1,r1,lsr#2		@ *=5
-+	adds	r4,r4,r1
-+	adcs	r5,r5,#0
-+	adcs	r6,r6,#0
-+	adcs	r7,r7,#0
-+	adc	r8,r8,#0
-+
-+	cmp	r0,lr			@ done yet?
-+	bhi	.Loop
-+
-+	ldr	r0,[sp,#12]
-+	add	sp,sp,#32
-+	stmdb	r0,{r4-r8}		@ store the result
-+
-+.Lno_data:
-+#if	__ARM_ARCH__>=5
-+	ldmia	sp!,{r3-r11,pc}
-+#else
-+	ldmia	sp!,{r3-r11,lr}
-+	tst	lr,#1
-+	moveq	pc,lr			@ be binary compatible with V4, yet
-+	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
-+#endif
-+.size	poly1305_blocks,.-poly1305_blocks
-+.type	poly1305_emit,%function
-+.align	5
-+poly1305_emit:
-+.Lpoly1305_emit:
-+	stmdb	sp!,{r4-r11}
-+
-+	ldmia	r0,{r3-r7}
-+
-+#if __ARM_ARCH__>=7
-+	ldr	ip,[r0,#36]		@ is_base2_26
-+
-+	adds	r8,r3,r4,lsl#26	@ base 2^26 -> base 2^32
-+	mov	r9,r4,lsr#6
-+	adcs	r9,r9,r5,lsl#20
-+	mov	r10,r5,lsr#12
-+	adcs	r10,r10,r6,lsl#14
-+	mov	r11,r6,lsr#18
-+	adcs	r11,r11,r7,lsl#8
-+	mov	r0,#0
-+	adc	r0,r0,r7,lsr#24
-+
-+	tst	ip,ip
-+	itttt	ne
-+	movne	r3,r8
-+	movne	r4,r9
-+	movne	r5,r10
-+	movne	r6,r11
-+	it	ne
-+	movne	r7,r0
-+#endif
-+
-+	adds	r8,r3,#5		@ compare to modulus
-+	adcs	r9,r4,#0
-+	adcs	r10,r5,#0
-+	adcs	r11,r6,#0
-+	adc	r0,r7,#0
-+	tst	r0,#4			@ did it carry/borrow?
-+
-+#ifdef	__thumb2__
-+	it	ne
-+#endif
-+	movne	r3,r8
-+	ldr	r8,[r2,#0]
-+#ifdef	__thumb2__
-+	it	ne
-+#endif
-+	movne	r4,r9
-+	ldr	r9,[r2,#4]
-+#ifdef	__thumb2__
-+	it	ne
-+#endif
-+	movne	r5,r10
-+	ldr	r10,[r2,#8]
-+#ifdef	__thumb2__
-+	it	ne
-+#endif
-+	movne	r6,r11
-+	ldr	r11,[r2,#12]
-+
-+	adds	r3,r3,r8
-+	adcs	r4,r4,r9
-+	adcs	r5,r5,r10
-+	adc	r6,r6,r11
-+
-+#if __ARM_ARCH__>=7
-+# ifdef __ARMEB__
-+	rev	r3,r3
-+	rev	r4,r4
-+	rev	r5,r5
-+	rev	r6,r6
-+# endif
-+	str	r3,[r1,#0]
-+	str	r4,[r1,#4]
-+	str	r5,[r1,#8]
-+	str	r6,[r1,#12]
-+#else
-+	strb	r3,[r1,#0]
-+	mov	r3,r3,lsr#8
-+	strb	r4,[r1,#4]
-+	mov	r4,r4,lsr#8
-+	strb	r5,[r1,#8]
-+	mov	r5,r5,lsr#8
-+	strb	r6,[r1,#12]
-+	mov	r6,r6,lsr#8
-+
-+	strb	r3,[r1,#1]
-+	mov	r3,r3,lsr#8
-+	strb	r4,[r1,#5]
-+	mov	r4,r4,lsr#8
-+	strb	r5,[r1,#9]
-+	mov	r5,r5,lsr#8
-+	strb	r6,[r1,#13]
-+	mov	r6,r6,lsr#8
-+
-+	strb	r3,[r1,#2]
-+	mov	r3,r3,lsr#8
-+	strb	r4,[r1,#6]
-+	mov	r4,r4,lsr#8
-+	strb	r5,[r1,#10]
-+	mov	r5,r5,lsr#8
-+	strb	r6,[r1,#14]
-+	mov	r6,r6,lsr#8
-+
-+	strb	r3,[r1,#3]
-+	strb	r4,[r1,#7]
-+	strb	r5,[r1,#11]
-+	strb	r6,[r1,#15]
-+#endif
-+	ldmia	sp!,{r4-r11}
-+#if	__ARM_ARCH__>=5
-+	bx	lr				@ bx	lr
-+#else
-+	tst	lr,#1
-+	moveq	pc,lr			@ be binary compatible with V4, yet
-+	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
-+#endif
-+.size	poly1305_emit,.-poly1305_emit
-+#if	__ARM_MAX_ARCH__>=7
-+.fpu	neon
-+
-+.type	poly1305_init_neon,%function
-+.align	5
-+poly1305_init_neon:
-+.Lpoly1305_init_neon:
-+	ldr	r3,[r0,#48]		@ first table element
-+	cmp	r3,#-1			@ is value impossible?
-+	bne	.Lno_init_neon
-+
-+	ldr	r4,[r0,#20]		@ load key base 2^32
-+	ldr	r5,[r0,#24]
-+	ldr	r6,[r0,#28]
-+	ldr	r7,[r0,#32]
-+
-+	and	r2,r4,#0x03ffffff	@ base 2^32 -> base 2^26
-+	mov	r3,r4,lsr#26
-+	mov	r4,r5,lsr#20
-+	orr	r3,r3,r5,lsl#6
-+	mov	r5,r6,lsr#14
-+	orr	r4,r4,r6,lsl#12
-+	mov	r6,r7,lsr#8
-+	orr	r5,r5,r7,lsl#18
-+	and	r3,r3,#0x03ffffff
-+	and	r4,r4,#0x03ffffff
-+	and	r5,r5,#0x03ffffff
-+
-+	vdup.32	d0,r2			@ r^1 in both lanes
-+	add	r2,r3,r3,lsl#2		@ *5
-+	vdup.32	d1,r3
-+	add	r3,r4,r4,lsl#2
-+	vdup.32	d2,r2
-+	vdup.32	d3,r4
-+	add	r4,r5,r5,lsl#2
-+	vdup.32	d4,r3
-+	vdup.32	d5,r5
-+	add	r5,r6,r6,lsl#2
-+	vdup.32	d6,r4
-+	vdup.32	d7,r6
-+	vdup.32	d8,r5
-+
-+	mov	r5,#2		@ counter
-+
-+.Lsquare_neon:
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
-+	@ d1 = h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3 + h2*5*r4
-+	@ d2 = h2*r0 + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-+	@ d3 = h3*r0 + h2*r1   + h1*r2   + h0*r3   + h4*5*r4
-+	@ d4 = h4*r0 + h3*r1   + h2*r2   + h1*r3   + h0*r4
-+
-+	vmull.u32	q5,d0,d0[1]
-+	vmull.u32	q6,d1,d0[1]
-+	vmull.u32	q7,d3,d0[1]
-+	vmull.u32	q8,d5,d0[1]
-+	vmull.u32	q9,d7,d0[1]
-+
-+	vmlal.u32	q5,d7,d2[1]
-+	vmlal.u32	q6,d0,d1[1]
-+	vmlal.u32	q7,d1,d1[1]
-+	vmlal.u32	q8,d3,d1[1]
-+	vmlal.u32	q9,d5,d1[1]
-+
-+	vmlal.u32	q5,d5,d4[1]
-+	vmlal.u32	q6,d7,d4[1]
-+	vmlal.u32	q8,d1,d3[1]
-+	vmlal.u32	q7,d0,d3[1]
-+	vmlal.u32	q9,d3,d3[1]
-+
-+	vmlal.u32	q5,d3,d6[1]
-+	vmlal.u32	q8,d0,d5[1]
-+	vmlal.u32	q6,d5,d6[1]
-+	vmlal.u32	q7,d7,d6[1]
-+	vmlal.u32	q9,d1,d5[1]
-+
-+	vmlal.u32	q8,d7,d8[1]
-+	vmlal.u32	q5,d1,d8[1]
-+	vmlal.u32	q6,d3,d8[1]
-+	vmlal.u32	q7,d5,d8[1]
-+	vmlal.u32	q9,d0,d7[1]
-+
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ lazy reduction as discussed in "NEON crypto" by D.J. Bernstein
-+	@ and P. Schwabe
-+	@
-+	@ H0>>+H1>>+H2>>+H3>>+H4
-+	@ H3>>+H4>>*5+H0>>+H1
-+	@
-+	@ Trivia.
-+	@
-+	@ Result of multiplication of n-bit number by m-bit number is
-+	@ n+m bits wide. However! Even though 2^n is a n+1-bit number,
-+	@ m-bit number multiplied by 2^n is still n+m bits wide.
-+	@
-+	@ Sum of two n-bit numbers is n+1 bits wide, sum of three - n+2,
-+	@ and so is sum of four. Sum of 2^m n-m-bit numbers and n-bit
-+	@ one is n+1 bits wide.
-+	@
-+	@ >>+ denotes Hnext += Hn>>26, Hn &= 0x3ffffff. This means that
-+	@ H0, H2, H3 are guaranteed to be 26 bits wide, while H1 and H4
-+	@ can be 27. However! In cases when their width exceeds 26 bits
-+	@ they are limited by 2^26+2^6. This in turn means that *sum*
-+	@ of the products with these values can still be viewed as sum
-+	@ of 52-bit numbers as long as the amount of addends is not a
-+	@ power of 2. For example,
-+	@
-+	@ H4 = H4*R0 + H3*R1 + H2*R2 + H1*R3 + H0 * R4,
-+	@
-+	@ which can't be larger than 5 * (2^26 + 2^6) * (2^26 + 2^6), or
-+	@ 5 * (2^52 + 2*2^32 + 2^12), which in turn is smaller than
-+	@ 8 * (2^52) or 2^55. However, the value is then multiplied by
-+	@ by 5, so we should be looking at 5 * 5 * (2^52 + 2^33 + 2^12),
-+	@ which is less than 32 * (2^52) or 2^57. And when processing
-+	@ data we are looking at triple as many addends...
-+	@
-+	@ In key setup procedure pre-reduced H0 is limited by 5*4+1 and
-+	@ 5*H4 - by 5*5 52-bit addends, or 57 bits. But when hashing the
-+	@ input H0 is limited by (5*4+1)*3 addends, or 58 bits, while
-+	@ 5*H4 by 5*5*3, or 59[!] bits. How is this relevant? vmlal.u32
-+	@ instruction accepts 2x32-bit input and writes 2x64-bit result.
-+	@ This means that result of reduction have to be compressed upon
-+	@ loop wrap-around. This can be done in the process of reduction
-+	@ to minimize amount of instructions [as well as amount of
-+	@ 128-bit instructions, which benefits low-end processors], but
-+	@ one has to watch for H2 (which is narrower than H0) and 5*H4
-+	@ not being wider than 58 bits, so that result of right shift
-+	@ by 26 bits fits in 32 bits. This is also useful on x86,
-+	@ because it allows to use paddd in place for paddq, which
-+	@ benefits Atom, where paddq is ridiculously slow.
-+
-+	vshr.u64	q15,q8,#26
-+	vmovn.i64	d16,q8
-+	 vshr.u64	q4,q5,#26
-+	 vmovn.i64	d10,q5
-+	vadd.i64	q9,q9,q15		@ h3 -> h4
-+	vbic.i32	d16,#0xfc000000	@ &=0x03ffffff
-+	 vadd.i64	q6,q6,q4		@ h0 -> h1
-+	 vbic.i32	d10,#0xfc000000
-+
-+	vshrn.u64	d30,q9,#26
-+	vmovn.i64	d18,q9
-+	 vshr.u64	q4,q6,#26
-+	 vmovn.i64	d12,q6
-+	 vadd.i64	q7,q7,q4		@ h1 -> h2
-+	vbic.i32	d18,#0xfc000000
-+	 vbic.i32	d12,#0xfc000000
-+
-+	vadd.i32	d10,d10,d30
-+	vshl.u32	d30,d30,#2
-+	 vshrn.u64	d8,q7,#26
-+	 vmovn.i64	d14,q7
-+	vadd.i32	d10,d10,d30	@ h4 -> h0
-+	 vadd.i32	d16,d16,d8	@ h2 -> h3
-+	 vbic.i32	d14,#0xfc000000
-+
-+	vshr.u32	d30,d10,#26
-+	vbic.i32	d10,#0xfc000000
-+	 vshr.u32	d8,d16,#26
-+	 vbic.i32	d16,#0xfc000000
-+	vadd.i32	d12,d12,d30	@ h0 -> h1
-+	 vadd.i32	d18,d18,d8	@ h3 -> h4
-+
-+	subs		r5,r5,#1
-+	beq		.Lsquare_break_neon
-+
-+	add		r6,r0,#(48+0*9*4)
-+	add		r7,r0,#(48+1*9*4)
-+
-+	vtrn.32		d0,d10		@ r^2:r^1
-+	vtrn.32		d3,d14
-+	vtrn.32		d5,d16
-+	vtrn.32		d1,d12
-+	vtrn.32		d7,d18
-+
-+	vshl.u32	d4,d3,#2		@ *5
-+	vshl.u32	d6,d5,#2
-+	vshl.u32	d2,d1,#2
-+	vshl.u32	d8,d7,#2
-+	vadd.i32	d4,d4,d3
-+	vadd.i32	d2,d2,d1
-+	vadd.i32	d6,d6,d5
-+	vadd.i32	d8,d8,d7
-+
-+	vst4.32		{d0[0],d1[0],d2[0],d3[0]},[r6]!
-+	vst4.32		{d0[1],d1[1],d2[1],d3[1]},[r7]!
-+	vst4.32		{d4[0],d5[0],d6[0],d7[0]},[r6]!
-+	vst4.32		{d4[1],d5[1],d6[1],d7[1]},[r7]!
-+	vst1.32		{d8[0]},[r6,:32]
-+	vst1.32		{d8[1]},[r7,:32]
-+
-+	b		.Lsquare_neon
-+
-+.align	4
-+.Lsquare_break_neon:
-+	add		r6,r0,#(48+2*4*9)
-+	add		r7,r0,#(48+3*4*9)
-+
-+	vmov		d0,d10		@ r^4:r^3
-+	vshl.u32	d2,d12,#2		@ *5
-+	vmov		d1,d12
-+	vshl.u32	d4,d14,#2
-+	vmov		d3,d14
-+	vshl.u32	d6,d16,#2
-+	vmov		d5,d16
-+	vshl.u32	d8,d18,#2
-+	vmov		d7,d18
-+	vadd.i32	d2,d2,d12
-+	vadd.i32	d4,d4,d14
-+	vadd.i32	d6,d6,d16
-+	vadd.i32	d8,d8,d18
-+
-+	vst4.32		{d0[0],d1[0],d2[0],d3[0]},[r6]!
-+	vst4.32		{d0[1],d1[1],d2[1],d3[1]},[r7]!
-+	vst4.32		{d4[0],d5[0],d6[0],d7[0]},[r6]!
-+	vst4.32		{d4[1],d5[1],d6[1],d7[1]},[r7]!
-+	vst1.32		{d8[0]},[r6]
-+	vst1.32		{d8[1]},[r7]
-+
-+.Lno_init_neon:
-+	bx	lr				@ bx	lr
-+.size	poly1305_init_neon,.-poly1305_init_neon
-+
-+.type	poly1305_blocks_neon,%function
-+.align	5
-+poly1305_blocks_neon:
-+.Lpoly1305_blocks_neon:
-+	ldr	ip,[r0,#36]		@ is_base2_26
-+
-+	cmp	r2,#64
-+	blo	.Lpoly1305_blocks
-+
-+	stmdb	sp!,{r4-r7}
-+	vstmdb	sp!,{d8-d15}		@ ABI specification says so
-+
-+	tst	ip,ip			@ is_base2_26?
-+	bne	.Lbase2_26_neon
-+
-+	stmdb	sp!,{r1-r3,lr}
-+	bl	.Lpoly1305_init_neon
-+
-+	ldr	r4,[r0,#0]		@ load hash value base 2^32
-+	ldr	r5,[r0,#4]
-+	ldr	r6,[r0,#8]
-+	ldr	r7,[r0,#12]
-+	ldr	ip,[r0,#16]
-+
-+	and	r2,r4,#0x03ffffff	@ base 2^32 -> base 2^26
-+	mov	r3,r4,lsr#26
-+	 veor	d10,d10,d10
-+	mov	r4,r5,lsr#20
-+	orr	r3,r3,r5,lsl#6
-+	 veor	d12,d12,d12
-+	mov	r5,r6,lsr#14
-+	orr	r4,r4,r6,lsl#12
-+	 veor	d14,d14,d14
-+	mov	r6,r7,lsr#8
-+	orr	r5,r5,r7,lsl#18
-+	 veor	d16,d16,d16
-+	and	r3,r3,#0x03ffffff
-+	orr	r6,r6,ip,lsl#24
-+	 veor	d18,d18,d18
-+	and	r4,r4,#0x03ffffff
-+	mov	r1,#1
-+	and	r5,r5,#0x03ffffff
-+	str	r1,[r0,#36]		@ set is_base2_26
-+
-+	vmov.32	d10[0],r2
-+	vmov.32	d12[0],r3
-+	vmov.32	d14[0],r4
-+	vmov.32	d16[0],r5
-+	vmov.32	d18[0],r6
-+	adr	r5,.Lzeros
-+
-+	ldmia	sp!,{r1-r3,lr}
-+	b	.Lhash_loaded
-+
-+.align	4
-+.Lbase2_26_neon:
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ load hash value
-+
-+	veor		d10,d10,d10
-+	veor		d12,d12,d12
-+	veor		d14,d14,d14
-+	veor		d16,d16,d16
-+	veor		d18,d18,d18
-+	vld4.32		{d10[0],d12[0],d14[0],d16[0]},[r0]!
-+	adr		r5,.Lzeros
-+	vld1.32		{d18[0]},[r0]
-+	sub		r0,r0,#16		@ rewind
-+
-+.Lhash_loaded:
-+	add		r4,r1,#32
-+	mov		r3,r3,lsl#24
-+	tst		r2,#31
-+	beq		.Leven
-+
-+	vld4.32		{d20[0],d22[0],d24[0],d26[0]},[r1]!
-+	vmov.32		d28[0],r3
-+	sub		r2,r2,#16
-+	add		r4,r1,#32
-+
-+# ifdef	__ARMEB__
-+	vrev32.8	q10,q10
-+	vrev32.8	q13,q13
-+	vrev32.8	q11,q11
-+	vrev32.8	q12,q12
-+# endif
-+	vsri.u32	d28,d26,#8	@ base 2^32 -> base 2^26
-+	vshl.u32	d26,d26,#18
-+
-+	vsri.u32	d26,d24,#14
-+	vshl.u32	d24,d24,#12
-+	vadd.i32	d29,d28,d18	@ add hash value and move to #hi
-+
-+	vbic.i32	d26,#0xfc000000
-+	vsri.u32	d24,d22,#20
-+	vshl.u32	d22,d22,#6
-+
-+	vbic.i32	d24,#0xfc000000
-+	vsri.u32	d22,d20,#26
-+	vadd.i32	d27,d26,d16
-+
-+	vbic.i32	d20,#0xfc000000
-+	vbic.i32	d22,#0xfc000000
-+	vadd.i32	d25,d24,d14
-+
-+	vadd.i32	d21,d20,d10
-+	vadd.i32	d23,d22,d12
-+
-+	mov		r7,r5
-+	add		r6,r0,#48
-+
-+	cmp		r2,r2
-+	b		.Long_tail
-+
-+.align	4
-+.Leven:
-+	subs		r2,r2,#64
-+	it		lo
-+	movlo		r4,r5
-+
-+	vmov.i32	q14,#1<<24		@ padbit, yes, always
-+	vld4.32		{d20,d22,d24,d26},[r1]	@ inp[0:1]
-+	add		r1,r1,#64
-+	vld4.32		{d21,d23,d25,d27},[r4]	@ inp[2:3] (or 0)
-+	add		r4,r4,#64
-+	itt		hi
-+	addhi		r7,r0,#(48+1*9*4)
-+	addhi		r6,r0,#(48+3*9*4)
-+
-+# ifdef	__ARMEB__
-+	vrev32.8	q10,q10
-+	vrev32.8	q13,q13
-+	vrev32.8	q11,q11
-+	vrev32.8	q12,q12
-+# endif
-+	vsri.u32	q14,q13,#8		@ base 2^32 -> base 2^26
-+	vshl.u32	q13,q13,#18
-+
-+	vsri.u32	q13,q12,#14
-+	vshl.u32	q12,q12,#12
-+
-+	vbic.i32	q13,#0xfc000000
-+	vsri.u32	q12,q11,#20
-+	vshl.u32	q11,q11,#6
-+
-+	vbic.i32	q12,#0xfc000000
-+	vsri.u32	q11,q10,#26
-+
-+	vbic.i32	q10,#0xfc000000
-+	vbic.i32	q11,#0xfc000000
-+
-+	bls		.Lskip_loop
-+
-+	vld4.32		{d0[1],d1[1],d2[1],d3[1]},[r7]!	@ load r^2
-+	vld4.32		{d0[0],d1[0],d2[0],d3[0]},[r6]!	@ load r^4
-+	vld4.32		{d4[1],d5[1],d6[1],d7[1]},[r7]!
-+	vld4.32		{d4[0],d5[0],d6[0],d7[0]},[r6]!
-+	b		.Loop_neon
-+
-+.align	5
-+.Loop_neon:
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2
-+	@ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r
-+	@   ___________________/
-+	@ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2
-+	@ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r
-+	@   ___________________/ ____________________/
-+	@
-+	@ Note that we start with inp[2:3]*r^2. This is because it
-+	@ doesn't depend on reduction in previous iteration.
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ d4 = h4*r0 + h3*r1   + h2*r2   + h1*r3   + h0*r4
-+	@ d3 = h3*r0 + h2*r1   + h1*r2   + h0*r3   + h4*5*r4
-+	@ d2 = h2*r0 + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-+	@ d1 = h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3 + h2*5*r4
-+	@ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
-+
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ inp[2:3]*r^2
-+
-+	vadd.i32	d24,d24,d14	@ accumulate inp[0:1]
-+	vmull.u32	q7,d25,d0[1]
-+	vadd.i32	d20,d20,d10
-+	vmull.u32	q5,d21,d0[1]
-+	vadd.i32	d26,d26,d16
-+	vmull.u32	q8,d27,d0[1]
-+	vmlal.u32	q7,d23,d1[1]
-+	vadd.i32	d22,d22,d12
-+	vmull.u32	q6,d23,d0[1]
-+
-+	vadd.i32	d28,d28,d18
-+	vmull.u32	q9,d29,d0[1]
-+	subs		r2,r2,#64
-+	vmlal.u32	q5,d29,d2[1]
-+	it		lo
-+	movlo		r4,r5
-+	vmlal.u32	q8,d25,d1[1]
-+	vld1.32		d8[1],[r7,:32]
-+	vmlal.u32	q6,d21,d1[1]
-+	vmlal.u32	q9,d27,d1[1]
-+
-+	vmlal.u32	q5,d27,d4[1]
-+	vmlal.u32	q8,d23,d3[1]
-+	vmlal.u32	q9,d25,d3[1]
-+	vmlal.u32	q6,d29,d4[1]
-+	vmlal.u32	q7,d21,d3[1]
-+
-+	vmlal.u32	q8,d21,d5[1]
-+	vmlal.u32	q5,d25,d6[1]
-+	vmlal.u32	q9,d23,d5[1]
-+	vmlal.u32	q6,d27,d6[1]
-+	vmlal.u32	q7,d29,d6[1]
-+
-+	vmlal.u32	q8,d29,d8[1]
-+	vmlal.u32	q5,d23,d8[1]
-+	vmlal.u32	q9,d21,d7[1]
-+	vmlal.u32	q6,d25,d8[1]
-+	vmlal.u32	q7,d27,d8[1]
-+
-+	vld4.32		{d21,d23,d25,d27},[r4]	@ inp[2:3] (or 0)
-+	add		r4,r4,#64
-+
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ (hash+inp[0:1])*r^4 and accumulate
-+
-+	vmlal.u32	q8,d26,d0[0]
-+	vmlal.u32	q5,d20,d0[0]
-+	vmlal.u32	q9,d28,d0[0]
-+	vmlal.u32	q6,d22,d0[0]
-+	vmlal.u32	q7,d24,d0[0]
-+	vld1.32		d8[0],[r6,:32]
-+
-+	vmlal.u32	q8,d24,d1[0]
-+	vmlal.u32	q5,d28,d2[0]
-+	vmlal.u32	q9,d26,d1[0]
-+	vmlal.u32	q6,d20,d1[0]
-+	vmlal.u32	q7,d22,d1[0]
-+
-+	vmlal.u32	q8,d22,d3[0]
-+	vmlal.u32	q5,d26,d4[0]
-+	vmlal.u32	q9,d24,d3[0]
-+	vmlal.u32	q6,d28,d4[0]
-+	vmlal.u32	q7,d20,d3[0]
-+
-+	vmlal.u32	q8,d20,d5[0]
-+	vmlal.u32	q5,d24,d6[0]
-+	vmlal.u32	q9,d22,d5[0]
-+	vmlal.u32	q6,d26,d6[0]
-+	vmlal.u32	q8,d28,d8[0]
-+
-+	vmlal.u32	q7,d28,d6[0]
-+	vmlal.u32	q5,d22,d8[0]
-+	vmlal.u32	q9,d20,d7[0]
-+	vmov.i32	q14,#1<<24		@ padbit, yes, always
-+	vmlal.u32	q6,d24,d8[0]
-+	vmlal.u32	q7,d26,d8[0]
-+
-+	vld4.32		{d20,d22,d24,d26},[r1]	@ inp[0:1]
-+	add		r1,r1,#64
-+# ifdef	__ARMEB__
-+	vrev32.8	q10,q10
-+	vrev32.8	q11,q11
-+	vrev32.8	q12,q12
-+	vrev32.8	q13,q13
-+# endif
-+
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ lazy reduction interleaved with base 2^32 -> base 2^26 of
-+	@ inp[0:3] previously loaded to q10-q13 and smashed to q10-q14.
-+
-+	vshr.u64	q15,q8,#26
-+	vmovn.i64	d16,q8
-+	 vshr.u64	q4,q5,#26
-+	 vmovn.i64	d10,q5
-+	vadd.i64	q9,q9,q15		@ h3 -> h4
-+	vbic.i32	d16,#0xfc000000
-+	  vsri.u32	q14,q13,#8		@ base 2^32 -> base 2^26
-+	 vadd.i64	q6,q6,q4		@ h0 -> h1
-+	  vshl.u32	q13,q13,#18
-+	 vbic.i32	d10,#0xfc000000
-+
-+	vshrn.u64	d30,q9,#26
-+	vmovn.i64	d18,q9
-+	 vshr.u64	q4,q6,#26
-+	 vmovn.i64	d12,q6
-+	 vadd.i64	q7,q7,q4		@ h1 -> h2
-+	  vsri.u32	q13,q12,#14
-+	vbic.i32	d18,#0xfc000000
-+	  vshl.u32	q12,q12,#12
-+	 vbic.i32	d12,#0xfc000000
-+
-+	vadd.i32	d10,d10,d30
-+	vshl.u32	d30,d30,#2
-+	  vbic.i32	q13,#0xfc000000
-+	 vshrn.u64	d8,q7,#26
-+	 vmovn.i64	d14,q7
-+	vaddl.u32	q5,d10,d30	@ h4 -> h0 [widen for a sec]
-+	  vsri.u32	q12,q11,#20
-+	 vadd.i32	d16,d16,d8	@ h2 -> h3
-+	  vshl.u32	q11,q11,#6
-+	 vbic.i32	d14,#0xfc000000
-+	  vbic.i32	q12,#0xfc000000
-+
-+	vshrn.u64	d30,q5,#26		@ re-narrow
-+	vmovn.i64	d10,q5
-+	  vsri.u32	q11,q10,#26
-+	  vbic.i32	q10,#0xfc000000
-+	 vshr.u32	d8,d16,#26
-+	 vbic.i32	d16,#0xfc000000
-+	vbic.i32	d10,#0xfc000000
-+	vadd.i32	d12,d12,d30	@ h0 -> h1
-+	 vadd.i32	d18,d18,d8	@ h3 -> h4
-+	  vbic.i32	q11,#0xfc000000
-+
-+	bhi		.Loop_neon
-+
-+.Lskip_loop:
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1
-+
-+	add		r7,r0,#(48+0*9*4)
-+	add		r6,r0,#(48+1*9*4)
-+	adds		r2,r2,#32
-+	it		ne
-+	movne		r2,#0
-+	bne		.Long_tail
-+
-+	vadd.i32	d25,d24,d14	@ add hash value and move to #hi
-+	vadd.i32	d21,d20,d10
-+	vadd.i32	d27,d26,d16
-+	vadd.i32	d23,d22,d12
-+	vadd.i32	d29,d28,d18
-+
-+.Long_tail:
-+	vld4.32		{d0[1],d1[1],d2[1],d3[1]},[r7]!	@ load r^1
-+	vld4.32		{d0[0],d1[0],d2[0],d3[0]},[r6]!	@ load r^2
-+
-+	vadd.i32	d24,d24,d14	@ can be redundant
-+	vmull.u32	q7,d25,d0
-+	vadd.i32	d20,d20,d10
-+	vmull.u32	q5,d21,d0
-+	vadd.i32	d26,d26,d16
-+	vmull.u32	q8,d27,d0
-+	vadd.i32	d22,d22,d12
-+	vmull.u32	q6,d23,d0
-+	vadd.i32	d28,d28,d18
-+	vmull.u32	q9,d29,d0
-+
-+	vmlal.u32	q5,d29,d2
-+	vld4.32		{d4[1],d5[1],d6[1],d7[1]},[r7]!
-+	vmlal.u32	q8,d25,d1
-+	vld4.32		{d4[0],d5[0],d6[0],d7[0]},[r6]!
-+	vmlal.u32	q6,d21,d1
-+	vmlal.u32	q9,d27,d1
-+	vmlal.u32	q7,d23,d1
-+
-+	vmlal.u32	q8,d23,d3
-+	vld1.32		d8[1],[r7,:32]
-+	vmlal.u32	q5,d27,d4
-+	vld1.32		d8[0],[r6,:32]
-+	vmlal.u32	q9,d25,d3
-+	vmlal.u32	q6,d29,d4
-+	vmlal.u32	q7,d21,d3
-+
-+	vmlal.u32	q8,d21,d5
-+	 it		ne
-+	 addne		r7,r0,#(48+2*9*4)
-+	vmlal.u32	q5,d25,d6
-+	 it		ne
-+	 addne		r6,r0,#(48+3*9*4)
-+	vmlal.u32	q9,d23,d5
-+	vmlal.u32	q6,d27,d6
-+	vmlal.u32	q7,d29,d6
-+
-+	vmlal.u32	q8,d29,d8
-+	 vorn		q0,q0,q0	@ all-ones, can be redundant
-+	vmlal.u32	q5,d23,d8
-+	 vshr.u64	q0,q0,#38
-+	vmlal.u32	q9,d21,d7
-+	vmlal.u32	q6,d25,d8
-+	vmlal.u32	q7,d27,d8
-+
-+	beq		.Lshort_tail
-+
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ (hash+inp[0:1])*r^4:r^3 and accumulate
-+
-+	vld4.32		{d0[1],d1[1],d2[1],d3[1]},[r7]!	@ load r^3
-+	vld4.32		{d0[0],d1[0],d2[0],d3[0]},[r6]!	@ load r^4
-+
-+	vmlal.u32	q7,d24,d0
-+	vmlal.u32	q5,d20,d0
-+	vmlal.u32	q8,d26,d0
-+	vmlal.u32	q6,d22,d0
-+	vmlal.u32	q9,d28,d0
-+
-+	vmlal.u32	q5,d28,d2
-+	vld4.32		{d4[1],d5[1],d6[1],d7[1]},[r7]!
-+	vmlal.u32	q8,d24,d1
-+	vld4.32		{d4[0],d5[0],d6[0],d7[0]},[r6]!
-+	vmlal.u32	q6,d20,d1
-+	vmlal.u32	q9,d26,d1
-+	vmlal.u32	q7,d22,d1
-+
-+	vmlal.u32	q8,d22,d3
-+	vld1.32		d8[1],[r7,:32]
-+	vmlal.u32	q5,d26,d4
-+	vld1.32		d8[0],[r6,:32]
-+	vmlal.u32	q9,d24,d3
-+	vmlal.u32	q6,d28,d4
-+	vmlal.u32	q7,d20,d3
-+
-+	vmlal.u32	q8,d20,d5
-+	vmlal.u32	q5,d24,d6
-+	vmlal.u32	q9,d22,d5
-+	vmlal.u32	q6,d26,d6
-+	vmlal.u32	q7,d28,d6
-+
-+	vmlal.u32	q8,d28,d8
-+	 vorn		q0,q0,q0	@ all-ones
-+	vmlal.u32	q5,d22,d8
-+	 vshr.u64	q0,q0,#38
-+	vmlal.u32	q9,d20,d7
-+	vmlal.u32	q6,d24,d8
-+	vmlal.u32	q7,d26,d8
-+
-+.Lshort_tail:
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ horizontal addition
-+
-+	vadd.i64	d16,d16,d17
-+	vadd.i64	d10,d10,d11
-+	vadd.i64	d18,d18,d19
-+	vadd.i64	d12,d12,d13
-+	vadd.i64	d14,d14,d15
-+
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ lazy reduction, but without narrowing
-+
-+	vshr.u64	q15,q8,#26
-+	vand.i64	q8,q8,q0
-+	 vshr.u64	q4,q5,#26
-+	 vand.i64	q5,q5,q0
-+	vadd.i64	q9,q9,q15		@ h3 -> h4
-+	 vadd.i64	q6,q6,q4		@ h0 -> h1
-+
-+	vshr.u64	q15,q9,#26
-+	vand.i64	q9,q9,q0
-+	 vshr.u64	q4,q6,#26
-+	 vand.i64	q6,q6,q0
-+	 vadd.i64	q7,q7,q4		@ h1 -> h2
-+
-+	vadd.i64	q5,q5,q15
-+	vshl.u64	q15,q15,#2
-+	 vshr.u64	q4,q7,#26
-+	 vand.i64	q7,q7,q0
-+	vadd.i64	q5,q5,q15		@ h4 -> h0
-+	 vadd.i64	q8,q8,q4		@ h2 -> h3
-+
-+	vshr.u64	q15,q5,#26
-+	vand.i64	q5,q5,q0
-+	 vshr.u64	q4,q8,#26
-+	 vand.i64	q8,q8,q0
-+	vadd.i64	q6,q6,q15		@ h0 -> h1
-+	 vadd.i64	q9,q9,q4		@ h3 -> h4
-+
-+	cmp		r2,#0
-+	bne		.Leven
-+
-+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-+	@ store hash value
-+
-+	vst4.32		{d10[0],d12[0],d14[0],d16[0]},[r0]!
-+	vst1.32		{d18[0]},[r0]
-+
-+	vldmia	sp!,{d8-d15}			@ epilogue
-+	ldmia	sp!,{r4-r7}
-+	bx	lr					@ bx	lr
-+.size	poly1305_blocks_neon,.-poly1305_blocks_neon
-+
-+.align	5
-+.Lzeros:
-+.long	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-+#ifndef	__KERNEL__
-+.LOPENSSL_armcap:
-+# ifdef	_WIN32
-+.word	OPENSSL_armcap_P
-+# else
-+.word	OPENSSL_armcap_P-.Lpoly1305_init
-+# endif
-+.comm	OPENSSL_armcap_P,4,4
-+.hidden	OPENSSL_armcap_P
-+#endif
-+#endif
-+.asciz	"Poly1305 for ARMv4/NEON, CRYPTOGAMS by @dot-asm"
-+.align	2
---- /dev/null
-+++ b/arch/arm/crypto/poly1305-glue.c
-@@ -0,0 +1,276 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * OpenSSL/Cryptogams accelerated Poly1305 transform for ARM
-+ *
-+ * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org>
-+ */
-+
-+#include <asm/hwcap.h>
-+#include <asm/neon.h>
-+#include <asm/simd.h>
-+#include <asm/unaligned.h>
-+#include <crypto/algapi.h>
-+#include <crypto/internal/hash.h>
-+#include <crypto/internal/poly1305.h>
-+#include <crypto/internal/simd.h>
-+#include <linux/cpufeature.h>
-+#include <linux/crypto.h>
-+#include <linux/jump_label.h>
-+#include <linux/module.h>
-+
-+void poly1305_init_arm(void *state, const u8 *key);
-+void poly1305_blocks_arm(void *state, const u8 *src, u32 len, u32 hibit);
-+void poly1305_emit_arm(void *state, __le32 *digest, const u32 *nonce);
-+
-+void __weak poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit)
-+{
-+}
-+
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-+
-+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
-+{
-+	poly1305_init_arm(&dctx->h, key);
-+	dctx->s[0] = get_unaligned_le32(key + 16);
-+	dctx->s[1] = get_unaligned_le32(key + 20);
-+	dctx->s[2] = get_unaligned_le32(key + 24);
-+	dctx->s[3] = get_unaligned_le32(key + 28);
-+	dctx->buflen = 0;
-+}
-+EXPORT_SYMBOL(poly1305_init_arch);
-+
-+static int arm_poly1305_init(struct shash_desc *desc)
-+{
-+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-+
-+	dctx->buflen = 0;
-+	dctx->rset = 0;
-+	dctx->sset = false;
-+
-+	return 0;
-+}
-+
-+static void arm_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
-+				 u32 len, u32 hibit, bool do_neon)
-+{
-+	if (unlikely(!dctx->sset)) {
-+		if (!dctx->rset) {
-+			poly1305_init_arm(&dctx->h, src);
-+			src += POLY1305_BLOCK_SIZE;
-+			len -= POLY1305_BLOCK_SIZE;
-+			dctx->rset = 1;
-+		}
-+		if (len >= POLY1305_BLOCK_SIZE) {
-+			dctx->s[0] = get_unaligned_le32(src +  0);
-+			dctx->s[1] = get_unaligned_le32(src +  4);
-+			dctx->s[2] = get_unaligned_le32(src +  8);
-+			dctx->s[3] = get_unaligned_le32(src + 12);
-+			src += POLY1305_BLOCK_SIZE;
-+			len -= POLY1305_BLOCK_SIZE;
-+			dctx->sset = true;
-+		}
-+		if (len < POLY1305_BLOCK_SIZE)
-+			return;
-+	}
-+
-+	len &= ~(POLY1305_BLOCK_SIZE - 1);
-+
-+	if (static_branch_likely(&have_neon) && likely(do_neon))
-+		poly1305_blocks_neon(&dctx->h, src, len, hibit);
-+	else
-+		poly1305_blocks_arm(&dctx->h, src, len, hibit);
-+}
-+
-+static void arm_poly1305_do_update(struct poly1305_desc_ctx *dctx,
-+				    const u8 *src, u32 len, bool do_neon)
-+{
-+	if (unlikely(dctx->buflen)) {
-+		u32 bytes = min(len, POLY1305_BLOCK_SIZE - dctx->buflen);
-+
-+		memcpy(dctx->buf + dctx->buflen, src, bytes);
-+		src += bytes;
-+		len -= bytes;
-+		dctx->buflen += bytes;
-+
-+		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-+			arm_poly1305_blocks(dctx, dctx->buf,
-+					    POLY1305_BLOCK_SIZE, 1, false);
-+			dctx->buflen = 0;
-+		}
-+	}
-+
-+	if (likely(len >= POLY1305_BLOCK_SIZE)) {
-+		arm_poly1305_blocks(dctx, src, len, 1, do_neon);
-+		src += round_down(len, POLY1305_BLOCK_SIZE);
-+		len %= POLY1305_BLOCK_SIZE;
-+	}
-+
-+	if (unlikely(len)) {
-+		dctx->buflen = len;
-+		memcpy(dctx->buf, src, len);
-+	}
-+}
-+
-+static int arm_poly1305_update(struct shash_desc *desc,
-+			       const u8 *src, unsigned int srclen)
-+{
-+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-+
-+	arm_poly1305_do_update(dctx, src, srclen, false);
-+	return 0;
-+}
-+
-+static int __maybe_unused arm_poly1305_update_neon(struct shash_desc *desc,
-+						   const u8 *src,
-+						   unsigned int srclen)
-+{
-+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-+	bool do_neon = crypto_simd_usable() && srclen > 128;
-+
-+	if (static_branch_likely(&have_neon) && do_neon)
-+		kernel_neon_begin();
-+	arm_poly1305_do_update(dctx, src, srclen, do_neon);
-+	if (static_branch_likely(&have_neon) && do_neon)
-+		kernel_neon_end();
-+	return 0;
-+}
-+
-+void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src,
-+			  unsigned int nbytes)
-+{
-+	bool do_neon = IS_ENABLED(CONFIG_KERNEL_MODE_NEON) &&
-+		       crypto_simd_usable();
-+
-+	if (unlikely(dctx->buflen)) {
-+		u32 bytes = min(nbytes, POLY1305_BLOCK_SIZE - dctx->buflen);
-+
-+		memcpy(dctx->buf + dctx->buflen, src, bytes);
-+		src += bytes;
-+		nbytes -= bytes;
-+		dctx->buflen += bytes;
-+
-+		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-+			poly1305_blocks_arm(&dctx->h, dctx->buf,
-+					    POLY1305_BLOCK_SIZE, 1);
-+			dctx->buflen = 0;
-+		}
-+	}
-+
-+	if (likely(nbytes >= POLY1305_BLOCK_SIZE)) {
-+		unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE);
-+
-+		if (static_branch_likely(&have_neon) && do_neon) {
-+			kernel_neon_begin();
-+			poly1305_blocks_neon(&dctx->h, src, len, 1);
-+			kernel_neon_end();
-+		} else {
-+			poly1305_blocks_arm(&dctx->h, src, len, 1);
-+		}
-+		src += len;
-+		nbytes %= POLY1305_BLOCK_SIZE;
-+	}
-+
-+	if (unlikely(nbytes)) {
-+		dctx->buflen = nbytes;
-+		memcpy(dctx->buf, src, nbytes);
-+	}
-+}
-+EXPORT_SYMBOL(poly1305_update_arch);
-+
-+void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst)
-+{
-+	__le32 digest[4];
-+	u64 f = 0;
-+
-+	if (unlikely(dctx->buflen)) {
-+		dctx->buf[dctx->buflen++] = 1;
-+		memset(dctx->buf + dctx->buflen, 0,
-+		       POLY1305_BLOCK_SIZE - dctx->buflen);
-+		poly1305_blocks_arm(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
-+	}
-+
-+	poly1305_emit_arm(&dctx->h, digest, dctx->s);
-+
-+	/* mac = (h + s) % (2^128) */
-+	f = (f >> 32) + le32_to_cpu(digest[0]);
-+	put_unaligned_le32(f, dst);
-+	f = (f >> 32) + le32_to_cpu(digest[1]);
-+	put_unaligned_le32(f, dst + 4);
-+	f = (f >> 32) + le32_to_cpu(digest[2]);
-+	put_unaligned_le32(f, dst + 8);
-+	f = (f >> 32) + le32_to_cpu(digest[3]);
-+	put_unaligned_le32(f, dst + 12);
-+
-+	*dctx = (struct poly1305_desc_ctx){};
-+}
-+EXPORT_SYMBOL(poly1305_final_arch);
-+
-+static int arm_poly1305_final(struct shash_desc *desc, u8 *dst)
-+{
-+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-+
-+	if (unlikely(!dctx->sset))
-+		return -ENOKEY;
-+
-+	poly1305_final_arch(dctx, dst);
-+	return 0;
-+}
-+
-+static struct shash_alg arm_poly1305_algs[] = {{
-+	.init			= arm_poly1305_init,
-+	.update			= arm_poly1305_update,
-+	.final			= arm_poly1305_final,
-+	.digestsize		= POLY1305_DIGEST_SIZE,
-+	.descsize		= sizeof(struct poly1305_desc_ctx),
-+
-+	.base.cra_name		= "poly1305",
-+	.base.cra_driver_name	= "poly1305-arm",
-+	.base.cra_priority	= 150,
-+	.base.cra_blocksize	= POLY1305_BLOCK_SIZE,
-+	.base.cra_module	= THIS_MODULE,
-+#ifdef CONFIG_KERNEL_MODE_NEON
-+}, {
-+	.init			= arm_poly1305_init,
-+	.update			= arm_poly1305_update_neon,
-+	.final			= arm_poly1305_final,
-+	.digestsize		= POLY1305_DIGEST_SIZE,
-+	.descsize		= sizeof(struct poly1305_desc_ctx),
-+
-+	.base.cra_name		= "poly1305",
-+	.base.cra_driver_name	= "poly1305-neon",
-+	.base.cra_priority	= 200,
-+	.base.cra_blocksize	= POLY1305_BLOCK_SIZE,
-+	.base.cra_module	= THIS_MODULE,
-+#endif
-+}};
-+
-+static int __init arm_poly1305_mod_init(void)
-+{
-+	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) &&
-+	    (elf_hwcap & HWCAP_NEON))
-+		static_branch_enable(&have_neon);
-+	else
-+		/* register only the first entry */
-+		return crypto_register_shash(&arm_poly1305_algs[0]);
-+
-+	return crypto_register_shashes(arm_poly1305_algs,
-+				       ARRAY_SIZE(arm_poly1305_algs));
-+}
-+
-+static void __exit arm_poly1305_mod_exit(void)
-+{
-+	if (!static_branch_likely(&have_neon)) {
-+		crypto_unregister_shash(&arm_poly1305_algs[0]);
-+		return;
-+	}
-+	crypto_unregister_shashes(arm_poly1305_algs,
-+				  ARRAY_SIZE(arm_poly1305_algs));
-+}
-+
-+module_init(arm_poly1305_mod_init);
-+module_exit(arm_poly1305_mod_exit);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS_CRYPTO("poly1305");
-+MODULE_ALIAS_CRYPTO("poly1305-arm");
-+MODULE_ALIAS_CRYPTO("poly1305-neon");
---- a/lib/crypto/Kconfig
-+++ b/lib/crypto/Kconfig
-@@ -40,7 +40,7 @@ config CRYPTO_LIB_DES
- config CRYPTO_LIB_POLY1305_RSIZE
- 	int
- 	default 4 if X86_64
--	default 9 if ARM64
-+	default 9 if ARM || ARM64
- 	default 1
- 
- config CRYPTO_ARCH_HAVE_LIB_POLY1305
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0020-crypto-mips-poly1305-incorporate-OpenSSL-CRYPTOGAMS-.patch b/target/linux/generic/backport-5.4/080-wireguard-0020-crypto-mips-poly1305-incorporate-OpenSSL-CRYPTOGAMS-.patch
deleted file mode 100644
index 272e1797da..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0020-crypto-mips-poly1305-incorporate-OpenSSL-CRYPTOGAMS-.patch
+++ /dev/null
@@ -1,1563 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:26 +0100
-Subject: [PATCH] crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS
- optimized implementation
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-commit a11d055e7a64ac34a5e99b6fe731299449cbcd58 upstream.
-
-This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation for
-MIPS authored by Andy Polyakov, a prior 64-bit only version of which has been
-contributed by him to the OpenSSL project. The file 'poly1305-mips.pl' is taken
-straight from this upstream GitHub repository [0] at commit
-d22ade312a7af958ec955620b0d241cf42c37feb, and already contains all the changes
-required to build it as part of a Linux kernel module.
-
-[0] https://github.com/dot-asm/cryptogams
-
-Co-developed-by: Andy Polyakov <appro@cryptogams.org>
-Signed-off-by: Andy Polyakov <appro@cryptogams.org>
-Co-developed-by: René van Dorst <opensource@vdorst.com>
-Signed-off-by: René van Dorst <opensource@vdorst.com>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/mips/crypto/Makefile         |   14 +
- arch/mips/crypto/poly1305-glue.c  |  203 +++++
- arch/mips/crypto/poly1305-mips.pl | 1273 +++++++++++++++++++++++++++++
- crypto/Kconfig                    |    5 +
- lib/crypto/Kconfig                |    1 +
- 5 files changed, 1496 insertions(+)
- create mode 100644 arch/mips/crypto/poly1305-glue.c
- create mode 100644 arch/mips/crypto/poly1305-mips.pl
-
---- a/arch/mips/crypto/Makefile
-+++ b/arch/mips/crypto/Makefile
-@@ -8,3 +8,17 @@ obj-$(CONFIG_CRYPTO_CRC32_MIPS) += crc32
- obj-$(CONFIG_CRYPTO_CHACHA_MIPS) += chacha-mips.o
- chacha-mips-y := chacha-core.o chacha-glue.o
- AFLAGS_chacha-core.o += -O2 # needed to fill branch delay slots
-+
-+obj-$(CONFIG_CRYPTO_POLY1305_MIPS) += poly1305-mips.o
-+poly1305-mips-y := poly1305-core.o poly1305-glue.o
-+
-+perlasm-flavour-$(CONFIG_CPU_MIPS32) := o32
-+perlasm-flavour-$(CONFIG_CPU_MIPS64) := 64
-+
-+quiet_cmd_perlasm = PERLASM $@
-+      cmd_perlasm = $(PERL) $(<) $(perlasm-flavour-y) $(@)
-+
-+$(obj)/poly1305-core.S: $(src)/poly1305-mips.pl FORCE
-+	$(call if_changed,perlasm)
-+
-+targets += poly1305-core.S
---- /dev/null
-+++ b/arch/mips/crypto/poly1305-glue.c
-@@ -0,0 +1,203 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * OpenSSL/Cryptogams accelerated Poly1305 transform for MIPS
-+ *
-+ * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org>
-+ */
-+
-+#include <asm/unaligned.h>
-+#include <crypto/algapi.h>
-+#include <crypto/internal/hash.h>
-+#include <crypto/internal/poly1305.h>
-+#include <linux/cpufeature.h>
-+#include <linux/crypto.h>
-+#include <linux/module.h>
-+
-+asmlinkage void poly1305_init_mips(void *state, const u8 *key);
-+asmlinkage void poly1305_blocks_mips(void *state, const u8 *src, u32 len, u32 hibit);
-+asmlinkage void poly1305_emit_mips(void *state, __le32 *digest, const u32 *nonce);
-+
-+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
-+{
-+	poly1305_init_mips(&dctx->h, key);
-+	dctx->s[0] = get_unaligned_le32(key + 16);
-+	dctx->s[1] = get_unaligned_le32(key + 20);
-+	dctx->s[2] = get_unaligned_le32(key + 24);
-+	dctx->s[3] = get_unaligned_le32(key + 28);
-+	dctx->buflen = 0;
-+}
-+EXPORT_SYMBOL(poly1305_init_arch);
-+
-+static int mips_poly1305_init(struct shash_desc *desc)
-+{
-+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-+
-+	dctx->buflen = 0;
-+	dctx->rset = 0;
-+	dctx->sset = false;
-+
-+	return 0;
-+}
-+
-+static void mips_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
-+				 u32 len, u32 hibit)
-+{
-+	if (unlikely(!dctx->sset)) {
-+		if (!dctx->rset) {
-+			poly1305_init_mips(&dctx->h, src);
-+			src += POLY1305_BLOCK_SIZE;
-+			len -= POLY1305_BLOCK_SIZE;
-+			dctx->rset = 1;
-+		}
-+		if (len >= POLY1305_BLOCK_SIZE) {
-+			dctx->s[0] = get_unaligned_le32(src +  0);
-+			dctx->s[1] = get_unaligned_le32(src +  4);
-+			dctx->s[2] = get_unaligned_le32(src +  8);
-+			dctx->s[3] = get_unaligned_le32(src + 12);
-+			src += POLY1305_BLOCK_SIZE;
-+			len -= POLY1305_BLOCK_SIZE;
-+			dctx->sset = true;
-+		}
-+		if (len < POLY1305_BLOCK_SIZE)
-+			return;
-+	}
-+
-+	len &= ~(POLY1305_BLOCK_SIZE - 1);
-+
-+	poly1305_blocks_mips(&dctx->h, src, len, hibit);
-+}
-+
-+static int mips_poly1305_update(struct shash_desc *desc, const u8 *src,
-+				unsigned int len)
-+{
-+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-+
-+	if (unlikely(dctx->buflen)) {
-+		u32 bytes = min(len, POLY1305_BLOCK_SIZE - dctx->buflen);
-+
-+		memcpy(dctx->buf + dctx->buflen, src, bytes);
-+		src += bytes;
-+		len -= bytes;
-+		dctx->buflen += bytes;
-+
-+		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-+			mips_poly1305_blocks(dctx, dctx->buf, POLY1305_BLOCK_SIZE, 1);
-+			dctx->buflen = 0;
-+		}
-+	}
-+
-+	if (likely(len >= POLY1305_BLOCK_SIZE)) {
-+		mips_poly1305_blocks(dctx, src, len, 1);
-+		src += round_down(len, POLY1305_BLOCK_SIZE);
-+		len %= POLY1305_BLOCK_SIZE;
-+	}
-+
-+	if (unlikely(len)) {
-+		dctx->buflen = len;
-+		memcpy(dctx->buf, src, len);
-+	}
-+	return 0;
-+}
-+
-+void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src,
-+			  unsigned int nbytes)
-+{
-+	if (unlikely(dctx->buflen)) {
-+		u32 bytes = min(nbytes, POLY1305_BLOCK_SIZE - dctx->buflen);
-+
-+		memcpy(dctx->buf + dctx->buflen, src, bytes);
-+		src += bytes;
-+		nbytes -= bytes;
-+		dctx->buflen += bytes;
-+
-+		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-+			poly1305_blocks_mips(&dctx->h, dctx->buf,
-+					     POLY1305_BLOCK_SIZE, 1);
-+			dctx->buflen = 0;
-+		}
-+	}
-+
-+	if (likely(nbytes >= POLY1305_BLOCK_SIZE)) {
-+		unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE);
-+
-+		poly1305_blocks_mips(&dctx->h, src, len, 1);
-+		src += len;
-+		nbytes %= POLY1305_BLOCK_SIZE;
-+	}
-+
-+	if (unlikely(nbytes)) {
-+		dctx->buflen = nbytes;
-+		memcpy(dctx->buf, src, nbytes);
-+	}
-+}
-+EXPORT_SYMBOL(poly1305_update_arch);
-+
-+void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst)
-+{
-+	__le32 digest[4];
-+	u64 f = 0;
-+
-+	if (unlikely(dctx->buflen)) {
-+		dctx->buf[dctx->buflen++] = 1;
-+		memset(dctx->buf + dctx->buflen, 0,
-+		       POLY1305_BLOCK_SIZE - dctx->buflen);
-+		poly1305_blocks_mips(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
-+	}
-+
-+	poly1305_emit_mips(&dctx->h, digest, dctx->s);
-+
-+	/* mac = (h + s) % (2^128) */
-+	f = (f >> 32) + le32_to_cpu(digest[0]);
-+	put_unaligned_le32(f, dst);
-+	f = (f >> 32) + le32_to_cpu(digest[1]);
-+	put_unaligned_le32(f, dst + 4);
-+	f = (f >> 32) + le32_to_cpu(digest[2]);
-+	put_unaligned_le32(f, dst + 8);
-+	f = (f >> 32) + le32_to_cpu(digest[3]);
-+	put_unaligned_le32(f, dst + 12);
-+
-+	*dctx = (struct poly1305_desc_ctx){};
-+}
-+EXPORT_SYMBOL(poly1305_final_arch);
-+
-+static int mips_poly1305_final(struct shash_desc *desc, u8 *dst)
-+{
-+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-+
-+	if (unlikely(!dctx->sset))
-+		return -ENOKEY;
-+
-+	poly1305_final_arch(dctx, dst);
-+	return 0;
-+}
-+
-+static struct shash_alg mips_poly1305_alg = {
-+	.init			= mips_poly1305_init,
-+	.update			= mips_poly1305_update,
-+	.final			= mips_poly1305_final,
-+	.digestsize		= POLY1305_DIGEST_SIZE,
-+	.descsize		= sizeof(struct poly1305_desc_ctx),
-+
-+	.base.cra_name		= "poly1305",
-+	.base.cra_driver_name	= "poly1305-mips",
-+	.base.cra_priority	= 200,
-+	.base.cra_blocksize	= POLY1305_BLOCK_SIZE,
-+	.base.cra_module	= THIS_MODULE,
-+};
-+
-+static int __init mips_poly1305_mod_init(void)
-+{
-+	return crypto_register_shash(&mips_poly1305_alg);
-+}
-+
-+static void __exit mips_poly1305_mod_exit(void)
-+{
-+	crypto_unregister_shash(&mips_poly1305_alg);
-+}
-+
-+module_init(mips_poly1305_mod_init);
-+module_exit(mips_poly1305_mod_exit);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS_CRYPTO("poly1305");
-+MODULE_ALIAS_CRYPTO("poly1305-mips");
---- /dev/null
-+++ b/arch/mips/crypto/poly1305-mips.pl
-@@ -0,0 +1,1273 @@
-+#!/usr/bin/env perl
-+# SPDX-License-Identifier: GPL-1.0+ OR BSD-3-Clause
-+#
-+# ====================================================================
-+# Written by Andy Polyakov, @dot-asm, originally for the OpenSSL
-+# project.
-+# ====================================================================
-+
-+# Poly1305 hash for MIPS.
-+#
-+# May 2016
-+#
-+# Numbers are cycles per processed byte with poly1305_blocks alone.
-+#
-+#		IALU/gcc
-+# R1x000	~5.5/+130%	(big-endian)
-+# Octeon II	2.50/+70%	(little-endian)
-+#
-+# March 2019
-+#
-+# Add 32-bit code path.
-+#
-+# October 2019
-+#
-+# Modulo-scheduling reduction allows to omit dependency chain at the
-+# end of inner loop and improve performance. Also optimize MIPS32R2
-+# code path for MIPS 1004K core. Per René von Dorst's suggestions.
-+#
-+#		IALU/gcc
-+# R1x000	~9.8/?		(big-endian)
-+# Octeon II	3.65/+140%	(little-endian)
-+# MT7621/1004K	4.75/?		(little-endian)
-+#
-+######################################################################
-+# There is a number of MIPS ABI in use, O32 and N32/64 are most
-+# widely used. Then there is a new contender: NUBI. It appears that if
-+# one picks the latter, it's possible to arrange code in ABI neutral
-+# manner. Therefore let's stick to NUBI register layout:
-+#
-+($zero,$at,$t0,$t1,$t2)=map("\$$_",(0..2,24,25));
-+($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
-+($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7,$s8,$s9,$s10,$s11)=map("\$$_",(12..23));
-+($gp,$tp,$sp,$fp,$ra)=map("\$$_",(3,28..31));
-+#
-+# The return value is placed in $a0. Following coding rules facilitate
-+# interoperability:
-+#
-+# - never ever touch $tp, "thread pointer", former $gp [o32 can be
-+#   excluded from the rule, because it's specified volatile];
-+# - copy return value to $t0, former $v0 [or to $a0 if you're adapting
-+#   old code];
-+# - on O32 populate $a4-$a7 with 'lw $aN,4*N($sp)' if necessary;
-+#
-+# For reference here is register layout for N32/64 MIPS ABIs:
-+#
-+# ($zero,$at,$v0,$v1)=map("\$$_",(0..3));
-+# ($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
-+# ($t0,$t1,$t2,$t3,$t8,$t9)=map("\$$_",(12..15,24,25));
-+# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23));
-+# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31));
-+#
-+# <appro@openssl.org>
-+#
-+######################################################################
-+
-+$flavour = shift || "64"; # supported flavours are o32,n32,64,nubi32,nubi64
-+
-+$v0 = ($flavour =~ /nubi/i) ? $a0 : $t0;
-+
-+if ($flavour =~ /64|n32/i) {{{
-+######################################################################
-+# 64-bit code path
-+#
-+
-+my ($ctx,$inp,$len,$padbit) = ($a0,$a1,$a2,$a3);
-+my ($in0,$in1,$tmp0,$tmp1,$tmp2,$tmp3,$tmp4) = ($a4,$a5,$a6,$a7,$at,$t0,$t1);
-+
-+$code.=<<___;
-+#if (defined(_MIPS_ARCH_MIPS64R3) || defined(_MIPS_ARCH_MIPS64R5) || \\
-+     defined(_MIPS_ARCH_MIPS64R6)) \\
-+     && !defined(_MIPS_ARCH_MIPS64R2)
-+# define _MIPS_ARCH_MIPS64R2
-+#endif
-+
-+#if defined(_MIPS_ARCH_MIPS64R6)
-+# define dmultu(rs,rt)
-+# define mflo(rd,rs,rt)	dmulu	rd,rs,rt
-+# define mfhi(rd,rs,rt)	dmuhu	rd,rs,rt
-+#else
-+# define dmultu(rs,rt)		dmultu	rs,rt
-+# define mflo(rd,rs,rt)	mflo	rd
-+# define mfhi(rd,rs,rt)	mfhi	rd
-+#endif
-+
-+#ifdef	__KERNEL__
-+# define poly1305_init   poly1305_init_mips
-+# define poly1305_blocks poly1305_blocks_mips
-+# define poly1305_emit   poly1305_emit_mips
-+#endif
-+
-+#if defined(__MIPSEB__) && !defined(MIPSEB)
-+# define MIPSEB
-+#endif
-+
-+#ifdef MIPSEB
-+# define MSB 0
-+# define LSB 7
-+#else
-+# define MSB 7
-+# define LSB 0
-+#endif
-+
-+.text
-+.set	noat
-+.set	noreorder
-+
-+.align	5
-+.globl	poly1305_init
-+.ent	poly1305_init
-+poly1305_init:
-+	.frame	$sp,0,$ra
-+	.set	reorder
-+
-+	sd	$zero,0($ctx)
-+	sd	$zero,8($ctx)
-+	sd	$zero,16($ctx)
-+
-+	beqz	$inp,.Lno_key
-+
-+#if defined(_MIPS_ARCH_MIPS64R6)
-+	andi	$tmp0,$inp,7		# $inp % 8
-+	dsubu	$inp,$inp,$tmp0		# align $inp
-+	sll	$tmp0,$tmp0,3		# byte to bit offset
-+	ld	$in0,0($inp)
-+	ld	$in1,8($inp)
-+	beqz	$tmp0,.Laligned_key
-+	ld	$tmp2,16($inp)
-+
-+	subu	$tmp1,$zero,$tmp0
-+# ifdef	MIPSEB
-+	dsllv	$in0,$in0,$tmp0
-+	dsrlv	$tmp3,$in1,$tmp1
-+	dsllv	$in1,$in1,$tmp0
-+	dsrlv	$tmp2,$tmp2,$tmp1
-+# else
-+	dsrlv	$in0,$in0,$tmp0
-+	dsllv	$tmp3,$in1,$tmp1
-+	dsrlv	$in1,$in1,$tmp0
-+	dsllv	$tmp2,$tmp2,$tmp1
-+# endif
-+	or	$in0,$in0,$tmp3
-+	or	$in1,$in1,$tmp2
-+.Laligned_key:
-+#else
-+	ldl	$in0,0+MSB($inp)
-+	ldl	$in1,8+MSB($inp)
-+	ldr	$in0,0+LSB($inp)
-+	ldr	$in1,8+LSB($inp)
-+#endif
-+#ifdef	MIPSEB
-+# if defined(_MIPS_ARCH_MIPS64R2)
-+	dsbh	$in0,$in0		# byte swap
-+	 dsbh	$in1,$in1
-+	dshd	$in0,$in0
-+	 dshd	$in1,$in1
-+# else
-+	ori	$tmp0,$zero,0xFF
-+	dsll	$tmp2,$tmp0,32
-+	or	$tmp0,$tmp2		# 0x000000FF000000FF
-+
-+	and	$tmp1,$in0,$tmp0	# byte swap
-+	 and	$tmp3,$in1,$tmp0
-+	dsrl	$tmp2,$in0,24
-+	 dsrl	$tmp4,$in1,24
-+	dsll	$tmp1,24
-+	 dsll	$tmp3,24
-+	and	$tmp2,$tmp0
-+	 and	$tmp4,$tmp0
-+	dsll	$tmp0,8			# 0x0000FF000000FF00
-+	or	$tmp1,$tmp2
-+	 or	$tmp3,$tmp4
-+	and	$tmp2,$in0,$tmp0
-+	 and	$tmp4,$in1,$tmp0
-+	dsrl	$in0,8
-+	 dsrl	$in1,8
-+	dsll	$tmp2,8
-+	 dsll	$tmp4,8
-+	and	$in0,$tmp0
-+	 and	$in1,$tmp0
-+	or	$tmp1,$tmp2
-+	 or	$tmp3,$tmp4
-+	or	$in0,$tmp1
-+	 or	$in1,$tmp3
-+	dsrl	$tmp1,$in0,32
-+	 dsrl	$tmp3,$in1,32
-+	dsll	$in0,32
-+	 dsll	$in1,32
-+	or	$in0,$tmp1
-+	 or	$in1,$tmp3
-+# endif
-+#endif
-+	li	$tmp0,1
-+	dsll	$tmp0,32		# 0x0000000100000000
-+	daddiu	$tmp0,-63		# 0x00000000ffffffc1
-+	dsll	$tmp0,28		# 0x0ffffffc10000000
-+	daddiu	$tmp0,-1		# 0x0ffffffc0fffffff
-+
-+	and	$in0,$tmp0
-+	daddiu	$tmp0,-3		# 0x0ffffffc0ffffffc
-+	and	$in1,$tmp0
-+
-+	sd	$in0,24($ctx)
-+	dsrl	$tmp0,$in1,2
-+	sd	$in1,32($ctx)
-+	daddu	$tmp0,$in1		# s1 = r1 + (r1 >> 2)
-+	sd	$tmp0,40($ctx)
-+
-+.Lno_key:
-+	li	$v0,0			# return 0
-+	jr	$ra
-+.end	poly1305_init
-+___
-+{
-+my $SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? "0x0003f000" : "0x00030000";
-+
-+my ($h0,$h1,$h2,$r0,$r1,$rs1,$d0,$d1,$d2) =
-+   ($s0,$s1,$s2,$s3,$s4,$s5,$in0,$in1,$t2);
-+my ($shr,$shl) = ($s6,$s7);		# used on R6
-+
-+$code.=<<___;
-+.align	5
-+.globl	poly1305_blocks
-+.ent	poly1305_blocks
-+poly1305_blocks:
-+	.set	noreorder
-+	dsrl	$len,4			# number of complete blocks
-+	bnez	$len,poly1305_blocks_internal
-+	nop
-+	jr	$ra
-+	nop
-+.end	poly1305_blocks
-+
-+.align	5
-+.ent	poly1305_blocks_internal
-+poly1305_blocks_internal:
-+	.set	noreorder
-+#if defined(_MIPS_ARCH_MIPS64R6)
-+	.frame	$sp,8*8,$ra
-+	.mask	$SAVED_REGS_MASK|0x000c0000,-8
-+	dsubu	$sp,8*8
-+	sd	$s7,56($sp)
-+	sd	$s6,48($sp)
-+#else
-+	.frame	$sp,6*8,$ra
-+	.mask	$SAVED_REGS_MASK,-8
-+	dsubu	$sp,6*8
-+#endif
-+	sd	$s5,40($sp)
-+	sd	$s4,32($sp)
-+___
-+$code.=<<___ if ($flavour =~ /nubi/i);	# optimize non-nubi prologue
-+	sd	$s3,24($sp)
-+	sd	$s2,16($sp)
-+	sd	$s1,8($sp)
-+	sd	$s0,0($sp)
-+___
-+$code.=<<___;
-+	.set	reorder
-+
-+#if defined(_MIPS_ARCH_MIPS64R6)
-+	andi	$shr,$inp,7
-+	dsubu	$inp,$inp,$shr		# align $inp
-+	sll	$shr,$shr,3		# byte to bit offset
-+	subu	$shl,$zero,$shr
-+#endif
-+
-+	ld	$h0,0($ctx)		# load hash value
-+	ld	$h1,8($ctx)
-+	ld	$h2,16($ctx)
-+
-+	ld	$r0,24($ctx)		# load key
-+	ld	$r1,32($ctx)
-+	ld	$rs1,40($ctx)
-+
-+	dsll	$len,4
-+	daddu	$len,$inp		# end of buffer
-+	b	.Loop
-+
-+.align	4
-+.Loop:
-+#if defined(_MIPS_ARCH_MIPS64R6)
-+	ld	$in0,0($inp)		# load input
-+	ld	$in1,8($inp)
-+	beqz	$shr,.Laligned_inp
-+
-+	ld	$tmp2,16($inp)
-+# ifdef	MIPSEB
-+	dsllv	$in0,$in0,$shr
-+	dsrlv	$tmp3,$in1,$shl
-+	dsllv	$in1,$in1,$shr
-+	dsrlv	$tmp2,$tmp2,$shl
-+# else
-+	dsrlv	$in0,$in0,$shr
-+	dsllv	$tmp3,$in1,$shl
-+	dsrlv	$in1,$in1,$shr
-+	dsllv	$tmp2,$tmp2,$shl
-+# endif
-+	or	$in0,$in0,$tmp3
-+	or	$in1,$in1,$tmp2
-+.Laligned_inp:
-+#else
-+	ldl	$in0,0+MSB($inp)	# load input
-+	ldl	$in1,8+MSB($inp)
-+	ldr	$in0,0+LSB($inp)
-+	ldr	$in1,8+LSB($inp)
-+#endif
-+	daddiu	$inp,16
-+#ifdef	MIPSEB
-+# if defined(_MIPS_ARCH_MIPS64R2)
-+	dsbh	$in0,$in0		# byte swap
-+	 dsbh	$in1,$in1
-+	dshd	$in0,$in0
-+	 dshd	$in1,$in1
-+# else
-+	ori	$tmp0,$zero,0xFF
-+	dsll	$tmp2,$tmp0,32
-+	or	$tmp0,$tmp2		# 0x000000FF000000FF
-+
-+	and	$tmp1,$in0,$tmp0	# byte swap
-+	 and	$tmp3,$in1,$tmp0
-+	dsrl	$tmp2,$in0,24
-+	 dsrl	$tmp4,$in1,24
-+	dsll	$tmp1,24
-+	 dsll	$tmp3,24
-+	and	$tmp2,$tmp0
-+	 and	$tmp4,$tmp0
-+	dsll	$tmp0,8			# 0x0000FF000000FF00
-+	or	$tmp1,$tmp2
-+	 or	$tmp3,$tmp4
-+	and	$tmp2,$in0,$tmp0
-+	 and	$tmp4,$in1,$tmp0
-+	dsrl	$in0,8
-+	 dsrl	$in1,8
-+	dsll	$tmp2,8
-+	 dsll	$tmp4,8
-+	and	$in0,$tmp0
-+	 and	$in1,$tmp0
-+	or	$tmp1,$tmp2
-+	 or	$tmp3,$tmp4
-+	or	$in0,$tmp1
-+	 or	$in1,$tmp3
-+	dsrl	$tmp1,$in0,32
-+	 dsrl	$tmp3,$in1,32
-+	dsll	$in0,32
-+	 dsll	$in1,32
-+	or	$in0,$tmp1
-+	 or	$in1,$tmp3
-+# endif
-+#endif
-+	dsrl	$tmp1,$h2,2		# modulo-scheduled reduction
-+	andi	$h2,$h2,3
-+	dsll	$tmp0,$tmp1,2
-+
-+	daddu	$d0,$h0,$in0		# accumulate input
-+	 daddu	$tmp1,$tmp0
-+	sltu	$tmp0,$d0,$h0
-+	daddu	$d0,$d0,$tmp1		# ... and residue
-+	sltu	$tmp1,$d0,$tmp1
-+	daddu	$d1,$h1,$in1
-+	daddu	$tmp0,$tmp1
-+	sltu	$tmp1,$d1,$h1
-+	daddu	$d1,$tmp0
-+
-+	dmultu	($r0,$d0)		# h0*r0
-+	 daddu	$d2,$h2,$padbit
-+	 sltu	$tmp0,$d1,$tmp0
-+	mflo	($h0,$r0,$d0)
-+	mfhi	($h1,$r0,$d0)
-+
-+	dmultu	($rs1,$d1)		# h1*5*r1
-+	 daddu	$d2,$tmp1
-+	 daddu	$d2,$tmp0
-+	mflo	($tmp0,$rs1,$d1)
-+	mfhi	($tmp1,$rs1,$d1)
-+
-+	dmultu	($r1,$d0)		# h0*r1
-+	mflo	($tmp2,$r1,$d0)
-+	mfhi	($h2,$r1,$d0)
-+	 daddu	$h0,$tmp0
-+	 daddu	$h1,$tmp1
-+	 sltu	$tmp0,$h0,$tmp0
-+
-+	dmultu	($r0,$d1)		# h1*r0
-+	 daddu	$h1,$tmp0
-+	 daddu	$h1,$tmp2
-+	mflo	($tmp0,$r0,$d1)
-+	mfhi	($tmp1,$r0,$d1)
-+
-+	dmultu	($rs1,$d2)		# h2*5*r1
-+	 sltu	$tmp2,$h1,$tmp2
-+	 daddu	$h2,$tmp2
-+	mflo	($tmp2,$rs1,$d2)
-+
-+	dmultu	($r0,$d2)		# h2*r0
-+	 daddu	$h1,$tmp0
-+	 daddu	$h2,$tmp1
-+	mflo	($tmp3,$r0,$d2)
-+	 sltu	$tmp0,$h1,$tmp0
-+	 daddu	$h2,$tmp0
-+
-+	daddu	$h1,$tmp2
-+	sltu	$tmp2,$h1,$tmp2
-+	daddu	$h2,$tmp2
-+	daddu	$h2,$tmp3
-+
-+	bne	$inp,$len,.Loop
-+
-+	sd	$h0,0($ctx)		# store hash value
-+	sd	$h1,8($ctx)
-+	sd	$h2,16($ctx)
-+
-+	.set	noreorder
-+#if defined(_MIPS_ARCH_MIPS64R6)
-+	ld	$s7,56($sp)
-+	ld	$s6,48($sp)
-+#endif
-+	ld	$s5,40($sp)		# epilogue
-+	ld	$s4,32($sp)
-+___
-+$code.=<<___ if ($flavour =~ /nubi/i);	# optimize non-nubi epilogue
-+	ld	$s3,24($sp)
-+	ld	$s2,16($sp)
-+	ld	$s1,8($sp)
-+	ld	$s0,0($sp)
-+___
-+$code.=<<___;
-+	jr	$ra
-+#if defined(_MIPS_ARCH_MIPS64R6)
-+	daddu	$sp,8*8
-+#else
-+	daddu	$sp,6*8
-+#endif
-+.end	poly1305_blocks_internal
-+___
-+}
-+{
-+my ($ctx,$mac,$nonce) = ($a0,$a1,$a2);
-+
-+$code.=<<___;
-+.align	5
-+.globl	poly1305_emit
-+.ent	poly1305_emit
-+poly1305_emit:
-+	.frame	$sp,0,$ra
-+	.set	reorder
-+
-+	ld	$tmp2,16($ctx)
-+	ld	$tmp0,0($ctx)
-+	ld	$tmp1,8($ctx)
-+
-+	li	$in0,-4			# final reduction
-+	dsrl	$in1,$tmp2,2
-+	and	$in0,$tmp2
-+	andi	$tmp2,$tmp2,3
-+	daddu	$in0,$in1
-+
-+	daddu	$tmp0,$tmp0,$in0
-+	sltu	$in1,$tmp0,$in0
-+	 daddiu	$in0,$tmp0,5		# compare to modulus
-+	daddu	$tmp1,$tmp1,$in1
-+	 sltiu	$tmp3,$in0,5
-+	sltu	$tmp4,$tmp1,$in1
-+	 daddu	$in1,$tmp1,$tmp3
-+	daddu	$tmp2,$tmp2,$tmp4
-+	 sltu	$tmp3,$in1,$tmp3
-+	 daddu	$tmp2,$tmp2,$tmp3
-+
-+	dsrl	$tmp2,2			# see if it carried/borrowed
-+	dsubu	$tmp2,$zero,$tmp2
-+
-+	xor	$in0,$tmp0
-+	xor	$in1,$tmp1
-+	and	$in0,$tmp2
-+	and	$in1,$tmp2
-+	xor	$in0,$tmp0
-+	xor	$in1,$tmp1
-+
-+	lwu	$tmp0,0($nonce)		# load nonce
-+	lwu	$tmp1,4($nonce)
-+	lwu	$tmp2,8($nonce)
-+	lwu	$tmp3,12($nonce)
-+	dsll	$tmp1,32
-+	dsll	$tmp3,32
-+	or	$tmp0,$tmp1
-+	or	$tmp2,$tmp3
-+
-+	daddu	$in0,$tmp0		# accumulate nonce
-+	daddu	$in1,$tmp2
-+	sltu	$tmp0,$in0,$tmp0
-+	daddu	$in1,$tmp0
-+
-+	dsrl	$tmp0,$in0,8		# write mac value
-+	dsrl	$tmp1,$in0,16
-+	dsrl	$tmp2,$in0,24
-+	sb	$in0,0($mac)
-+	dsrl	$tmp3,$in0,32
-+	sb	$tmp0,1($mac)
-+	dsrl	$tmp0,$in0,40
-+	sb	$tmp1,2($mac)
-+	dsrl	$tmp1,$in0,48
-+	sb	$tmp2,3($mac)
-+	dsrl	$tmp2,$in0,56
-+	sb	$tmp3,4($mac)
-+	dsrl	$tmp3,$in1,8
-+	sb	$tmp0,5($mac)
-+	dsrl	$tmp0,$in1,16
-+	sb	$tmp1,6($mac)
-+	dsrl	$tmp1,$in1,24
-+	sb	$tmp2,7($mac)
-+
-+	sb	$in1,8($mac)
-+	dsrl	$tmp2,$in1,32
-+	sb	$tmp3,9($mac)
-+	dsrl	$tmp3,$in1,40
-+	sb	$tmp0,10($mac)
-+	dsrl	$tmp0,$in1,48
-+	sb	$tmp1,11($mac)
-+	dsrl	$tmp1,$in1,56
-+	sb	$tmp2,12($mac)
-+	sb	$tmp3,13($mac)
-+	sb	$tmp0,14($mac)
-+	sb	$tmp1,15($mac)
-+
-+	jr	$ra
-+.end	poly1305_emit
-+.rdata
-+.asciiz	"Poly1305 for MIPS64, CRYPTOGAMS by \@dot-asm"
-+.align	2
-+___
-+}
-+}}} else {{{
-+######################################################################
-+# 32-bit code path
-+#
-+
-+my ($ctx,$inp,$len,$padbit) = ($a0,$a1,$a2,$a3);
-+my ($in0,$in1,$in2,$in3,$tmp0,$tmp1,$tmp2,$tmp3) =
-+   ($a4,$a5,$a6,$a7,$at,$t0,$t1,$t2);
-+
-+$code.=<<___;
-+#if (defined(_MIPS_ARCH_MIPS32R3) || defined(_MIPS_ARCH_MIPS32R5) || \\
-+     defined(_MIPS_ARCH_MIPS32R6)) \\
-+     && !defined(_MIPS_ARCH_MIPS32R2)
-+# define _MIPS_ARCH_MIPS32R2
-+#endif
-+
-+#if defined(_MIPS_ARCH_MIPS32R6)
-+# define multu(rs,rt)
-+# define mflo(rd,rs,rt)	mulu	rd,rs,rt
-+# define mfhi(rd,rs,rt)	muhu	rd,rs,rt
-+#else
-+# define multu(rs,rt)	multu	rs,rt
-+# define mflo(rd,rs,rt)	mflo	rd
-+# define mfhi(rd,rs,rt)	mfhi	rd
-+#endif
-+
-+#ifdef	__KERNEL__
-+# define poly1305_init   poly1305_init_mips
-+# define poly1305_blocks poly1305_blocks_mips
-+# define poly1305_emit   poly1305_emit_mips
-+#endif
-+
-+#if defined(__MIPSEB__) && !defined(MIPSEB)
-+# define MIPSEB
-+#endif
-+
-+#ifdef MIPSEB
-+# define MSB 0
-+# define LSB 3
-+#else
-+# define MSB 3
-+# define LSB 0
-+#endif
-+
-+.text
-+.set	noat
-+.set	noreorder
-+
-+.align	5
-+.globl	poly1305_init
-+.ent	poly1305_init
-+poly1305_init:
-+	.frame	$sp,0,$ra
-+	.set	reorder
-+
-+	sw	$zero,0($ctx)
-+	sw	$zero,4($ctx)
-+	sw	$zero,8($ctx)
-+	sw	$zero,12($ctx)
-+	sw	$zero,16($ctx)
-+
-+	beqz	$inp,.Lno_key
-+
-+#if defined(_MIPS_ARCH_MIPS32R6)
-+	andi	$tmp0,$inp,3		# $inp % 4
-+	subu	$inp,$inp,$tmp0		# align $inp
-+	sll	$tmp0,$tmp0,3		# byte to bit offset
-+	lw	$in0,0($inp)
-+	lw	$in1,4($inp)
-+	lw	$in2,8($inp)
-+	lw	$in3,12($inp)
-+	beqz	$tmp0,.Laligned_key
-+
-+	lw	$tmp2,16($inp)
-+	subu	$tmp1,$zero,$tmp0
-+# ifdef	MIPSEB
-+	sllv	$in0,$in0,$tmp0
-+	srlv	$tmp3,$in1,$tmp1
-+	sllv	$in1,$in1,$tmp0
-+	or	$in0,$in0,$tmp3
-+	srlv	$tmp3,$in2,$tmp1
-+	sllv	$in2,$in2,$tmp0
-+	or	$in1,$in1,$tmp3
-+	srlv	$tmp3,$in3,$tmp1
-+	sllv	$in3,$in3,$tmp0
-+	or	$in2,$in2,$tmp3
-+	srlv	$tmp2,$tmp2,$tmp1
-+	or	$in3,$in3,$tmp2
-+# else
-+	srlv	$in0,$in0,$tmp0
-+	sllv	$tmp3,$in1,$tmp1
-+	srlv	$in1,$in1,$tmp0
-+	or	$in0,$in0,$tmp3
-+	sllv	$tmp3,$in2,$tmp1
-+	srlv	$in2,$in2,$tmp0
-+	or	$in1,$in1,$tmp3
-+	sllv	$tmp3,$in3,$tmp1
-+	srlv	$in3,$in3,$tmp0
-+	or	$in2,$in2,$tmp3
-+	sllv	$tmp2,$tmp2,$tmp1
-+	or	$in3,$in3,$tmp2
-+# endif
-+.Laligned_key:
-+#else
-+	lwl	$in0,0+MSB($inp)
-+	lwl	$in1,4+MSB($inp)
-+	lwl	$in2,8+MSB($inp)
-+	lwl	$in3,12+MSB($inp)
-+	lwr	$in0,0+LSB($inp)
-+	lwr	$in1,4+LSB($inp)
-+	lwr	$in2,8+LSB($inp)
-+	lwr	$in3,12+LSB($inp)
-+#endif
-+#ifdef	MIPSEB
-+# if defined(_MIPS_ARCH_MIPS32R2)
-+	wsbh	$in0,$in0		# byte swap
-+	wsbh	$in1,$in1
-+	wsbh	$in2,$in2
-+	wsbh	$in3,$in3
-+	rotr	$in0,$in0,16
-+	rotr	$in1,$in1,16
-+	rotr	$in2,$in2,16
-+	rotr	$in3,$in3,16
-+# else
-+	srl	$tmp0,$in0,24		# byte swap
-+	srl	$tmp1,$in0,8
-+	andi	$tmp2,$in0,0xFF00
-+	sll	$in0,$in0,24
-+	andi	$tmp1,0xFF00
-+	sll	$tmp2,$tmp2,8
-+	or	$in0,$tmp0
-+	 srl	$tmp0,$in1,24
-+	or	$tmp1,$tmp2
-+	 srl	$tmp2,$in1,8
-+	or	$in0,$tmp1
-+	 andi	$tmp1,$in1,0xFF00
-+	 sll	$in1,$in1,24
-+	 andi	$tmp2,0xFF00
-+	 sll	$tmp1,$tmp1,8
-+	 or	$in1,$tmp0
-+	srl	$tmp0,$in2,24
-+	 or	$tmp2,$tmp1
-+	srl	$tmp1,$in2,8
-+	 or	$in1,$tmp2
-+	andi	$tmp2,$in2,0xFF00
-+	sll	$in2,$in2,24
-+	andi	$tmp1,0xFF00
-+	sll	$tmp2,$tmp2,8
-+	or	$in2,$tmp0
-+	 srl	$tmp0,$in3,24
-+	or	$tmp1,$tmp2
-+	 srl	$tmp2,$in3,8
-+	or	$in2,$tmp1
-+	 andi	$tmp1,$in3,0xFF00
-+	 sll	$in3,$in3,24
-+	 andi	$tmp2,0xFF00
-+	 sll	$tmp1,$tmp1,8
-+	 or	$in3,$tmp0
-+	 or	$tmp2,$tmp1
-+	 or	$in3,$tmp2
-+# endif
-+#endif
-+	lui	$tmp0,0x0fff
-+	ori	$tmp0,0xffff		# 0x0fffffff
-+	and	$in0,$in0,$tmp0
-+	subu	$tmp0,3			# 0x0ffffffc
-+	and	$in1,$in1,$tmp0
-+	and	$in2,$in2,$tmp0
-+	and	$in3,$in3,$tmp0
-+
-+	sw	$in0,20($ctx)
-+	sw	$in1,24($ctx)
-+	sw	$in2,28($ctx)
-+	sw	$in3,32($ctx)
-+
-+	srl	$tmp1,$in1,2
-+	srl	$tmp2,$in2,2
-+	srl	$tmp3,$in3,2
-+	addu	$in1,$in1,$tmp1		# s1 = r1 + (r1 >> 2)
-+	addu	$in2,$in2,$tmp2
-+	addu	$in3,$in3,$tmp3
-+	sw	$in1,36($ctx)
-+	sw	$in2,40($ctx)
-+	sw	$in3,44($ctx)
-+.Lno_key:
-+	li	$v0,0
-+	jr	$ra
-+.end	poly1305_init
-+___
-+{
-+my $SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? "0x00fff000" : "0x00ff0000";
-+
-+my ($h0,$h1,$h2,$h3,$h4, $r0,$r1,$r2,$r3, $rs1,$rs2,$rs3) =
-+   ($s0,$s1,$s2,$s3,$s4, $s5,$s6,$s7,$s8, $s9,$s10,$s11);
-+my ($d0,$d1,$d2,$d3) =
-+   ($a4,$a5,$a6,$a7);
-+my $shr = $t2;		# used on R6
-+my $one = $t2;		# used on R2
-+
-+$code.=<<___;
-+.globl	poly1305_blocks
-+.align	5
-+.ent	poly1305_blocks
-+poly1305_blocks:
-+	.frame	$sp,16*4,$ra
-+	.mask	$SAVED_REGS_MASK,-4
-+	.set	noreorder
-+	subu	$sp, $sp,4*12
-+	sw	$s11,4*11($sp)
-+	sw	$s10,4*10($sp)
-+	sw	$s9, 4*9($sp)
-+	sw	$s8, 4*8($sp)
-+	sw	$s7, 4*7($sp)
-+	sw	$s6, 4*6($sp)
-+	sw	$s5, 4*5($sp)
-+	sw	$s4, 4*4($sp)
-+___
-+$code.=<<___ if ($flavour =~ /nubi/i);	# optimize non-nubi prologue
-+	sw	$s3, 4*3($sp)
-+	sw	$s2, 4*2($sp)
-+	sw	$s1, 4*1($sp)
-+	sw	$s0, 4*0($sp)
-+___
-+$code.=<<___;
-+	.set	reorder
-+
-+	srl	$len,4			# number of complete blocks
-+	li	$one,1
-+	beqz	$len,.Labort
-+
-+#if defined(_MIPS_ARCH_MIPS32R6)
-+	andi	$shr,$inp,3
-+	subu	$inp,$inp,$shr		# align $inp
-+	sll	$shr,$shr,3		# byte to bit offset
-+#endif
-+
-+	lw	$h0,0($ctx)		# load hash value
-+	lw	$h1,4($ctx)
-+	lw	$h2,8($ctx)
-+	lw	$h3,12($ctx)
-+	lw	$h4,16($ctx)
-+
-+	lw	$r0,20($ctx)		# load key
-+	lw	$r1,24($ctx)
-+	lw	$r2,28($ctx)
-+	lw	$r3,32($ctx)
-+	lw	$rs1,36($ctx)
-+	lw	$rs2,40($ctx)
-+	lw	$rs3,44($ctx)
-+
-+	sll	$len,4
-+	addu	$len,$len,$inp		# end of buffer
-+	b	.Loop
-+
-+.align	4
-+.Loop:
-+#if defined(_MIPS_ARCH_MIPS32R6)
-+	lw	$d0,0($inp)		# load input
-+	lw	$d1,4($inp)
-+	lw	$d2,8($inp)
-+	lw	$d3,12($inp)
-+	beqz	$shr,.Laligned_inp
-+
-+	lw	$t0,16($inp)
-+	subu	$t1,$zero,$shr
-+# ifdef	MIPSEB
-+	sllv	$d0,$d0,$shr
-+	srlv	$at,$d1,$t1
-+	sllv	$d1,$d1,$shr
-+	or	$d0,$d0,$at
-+	srlv	$at,$d2,$t1
-+	sllv	$d2,$d2,$shr
-+	or	$d1,$d1,$at
-+	srlv	$at,$d3,$t1
-+	sllv	$d3,$d3,$shr
-+	or	$d2,$d2,$at
-+	srlv	$t0,$t0,$t1
-+	or	$d3,$d3,$t0
-+# else
-+	srlv	$d0,$d0,$shr
-+	sllv	$at,$d1,$t1
-+	srlv	$d1,$d1,$shr
-+	or	$d0,$d0,$at
-+	sllv	$at,$d2,$t1
-+	srlv	$d2,$d2,$shr
-+	or	$d1,$d1,$at
-+	sllv	$at,$d3,$t1
-+	srlv	$d3,$d3,$shr
-+	or	$d2,$d2,$at
-+	sllv	$t0,$t0,$t1
-+	or	$d3,$d3,$t0
-+# endif
-+.Laligned_inp:
-+#else
-+	lwl	$d0,0+MSB($inp)		# load input
-+	lwl	$d1,4+MSB($inp)
-+	lwl	$d2,8+MSB($inp)
-+	lwl	$d3,12+MSB($inp)
-+	lwr	$d0,0+LSB($inp)
-+	lwr	$d1,4+LSB($inp)
-+	lwr	$d2,8+LSB($inp)
-+	lwr	$d3,12+LSB($inp)
-+#endif
-+#ifdef	MIPSEB
-+# if defined(_MIPS_ARCH_MIPS32R2)
-+	wsbh	$d0,$d0			# byte swap
-+	wsbh	$d1,$d1
-+	wsbh	$d2,$d2
-+	wsbh	$d3,$d3
-+	rotr	$d0,$d0,16
-+	rotr	$d1,$d1,16
-+	rotr	$d2,$d2,16
-+	rotr	$d3,$d3,16
-+# else
-+	srl	$at,$d0,24		# byte swap
-+	srl	$t0,$d0,8
-+	andi	$t1,$d0,0xFF00
-+	sll	$d0,$d0,24
-+	andi	$t0,0xFF00
-+	sll	$t1,$t1,8
-+	or	$d0,$at
-+	 srl	$at,$d1,24
-+	or	$t0,$t1
-+	 srl	$t1,$d1,8
-+	or	$d0,$t0
-+	 andi	$t0,$d1,0xFF00
-+	 sll	$d1,$d1,24
-+	 andi	$t1,0xFF00
-+	 sll	$t0,$t0,8
-+	 or	$d1,$at
-+	srl	$at,$d2,24
-+	 or	$t1,$t0
-+	srl	$t0,$d2,8
-+	 or	$d1,$t1
-+	andi	$t1,$d2,0xFF00
-+	sll	$d2,$d2,24
-+	andi	$t0,0xFF00
-+	sll	$t1,$t1,8
-+	or	$d2,$at
-+	 srl	$at,$d3,24
-+	or	$t0,$t1
-+	 srl	$t1,$d3,8
-+	or	$d2,$t0
-+	 andi	$t0,$d3,0xFF00
-+	 sll	$d3,$d3,24
-+	 andi	$t1,0xFF00
-+	 sll	$t0,$t0,8
-+	 or	$d3,$at
-+	 or	$t1,$t0
-+	 or	$d3,$t1
-+# endif
-+#endif
-+	srl	$t0,$h4,2		# modulo-scheduled reduction
-+	andi	$h4,$h4,3
-+	sll	$at,$t0,2
-+
-+	addu	$d0,$d0,$h0		# accumulate input
-+	 addu	$t0,$t0,$at
-+	sltu	$h0,$d0,$h0
-+	addu	$d0,$d0,$t0		# ... and residue
-+	sltu	$at,$d0,$t0
-+
-+	addu	$d1,$d1,$h1
-+	 addu	$h0,$h0,$at		# carry
-+	sltu	$h1,$d1,$h1
-+	addu	$d1,$d1,$h0
-+	sltu	$h0,$d1,$h0
-+
-+	addu	$d2,$d2,$h2
-+	 addu	$h1,$h1,$h0		# carry
-+	sltu	$h2,$d2,$h2
-+	addu	$d2,$d2,$h1
-+	sltu	$h1,$d2,$h1
-+
-+	addu	$d3,$d3,$h3
-+	 addu	$h2,$h2,$h1		# carry
-+	sltu	$h3,$d3,$h3
-+	addu	$d3,$d3,$h2
-+
-+#if defined(_MIPS_ARCH_MIPS32R2) && !defined(_MIPS_ARCH_MIPS32R6)
-+	multu	$r0,$d0			# d0*r0
-+	 sltu	$h2,$d3,$h2
-+	maddu	$rs3,$d1		# d1*s3
-+	 addu	$h3,$h3,$h2		# carry
-+	maddu	$rs2,$d2		# d2*s2
-+	 addu	$h4,$h4,$padbit
-+	maddu	$rs1,$d3		# d3*s1
-+	 addu	$h4,$h4,$h3
-+	mfhi	$at
-+	mflo	$h0
-+
-+	multu	$r1,$d0			# d0*r1
-+	maddu	$r0,$d1			# d1*r0
-+	maddu	$rs3,$d2		# d2*s3
-+	maddu	$rs2,$d3		# d3*s2
-+	maddu	$rs1,$h4		# h4*s1
-+	maddu	$at,$one		# hi*1
-+	mfhi	$at
-+	mflo	$h1
-+
-+	multu	$r2,$d0			# d0*r2
-+	maddu	$r1,$d1			# d1*r1
-+	maddu	$r0,$d2			# d2*r0
-+	maddu	$rs3,$d3		# d3*s3
-+	maddu	$rs2,$h4		# h4*s2
-+	maddu	$at,$one		# hi*1
-+	mfhi	$at
-+	mflo	$h2
-+
-+	mul	$t0,$r0,$h4		# h4*r0
-+
-+	multu	$r3,$d0			# d0*r3
-+	maddu	$r2,$d1			# d1*r2
-+	maddu	$r1,$d2			# d2*r1
-+	maddu	$r0,$d3			# d3*r0
-+	maddu	$rs3,$h4		# h4*s3
-+	maddu	$at,$one		# hi*1
-+	mfhi	$at
-+	mflo	$h3
-+
-+	 addiu	$inp,$inp,16
-+
-+	addu	$h4,$t0,$at
-+#else
-+	multu	($r0,$d0)		# d0*r0
-+	mflo	($h0,$r0,$d0)
-+	mfhi	($h1,$r0,$d0)
-+
-+	 sltu	$h2,$d3,$h2
-+	 addu	$h3,$h3,$h2		# carry
-+
-+	multu	($rs3,$d1)		# d1*s3
-+	mflo	($at,$rs3,$d1)
-+	mfhi	($t0,$rs3,$d1)
-+
-+	 addu	$h4,$h4,$padbit
-+	 addiu	$inp,$inp,16
-+	 addu	$h4,$h4,$h3
-+
-+	multu	($rs2,$d2)		# d2*s2
-+	mflo	($a3,$rs2,$d2)
-+	mfhi	($t1,$rs2,$d2)
-+	 addu	$h0,$h0,$at
-+	 addu	$h1,$h1,$t0
-+	multu	($rs1,$d3)		# d3*s1
-+	 sltu	$at,$h0,$at
-+	 addu	$h1,$h1,$at
-+
-+	mflo	($at,$rs1,$d3)
-+	mfhi	($t0,$rs1,$d3)
-+	 addu	$h0,$h0,$a3
-+	 addu	$h1,$h1,$t1
-+	multu	($r1,$d0)		# d0*r1
-+	 sltu	$a3,$h0,$a3
-+	 addu	$h1,$h1,$a3
-+
-+
-+	mflo	($a3,$r1,$d0)
-+	mfhi	($h2,$r1,$d0)
-+	 addu	$h0,$h0,$at
-+	 addu	$h1,$h1,$t0
-+	multu	($r0,$d1)		# d1*r0
-+	 sltu	$at,$h0,$at
-+	 addu	$h1,$h1,$at
-+
-+	mflo	($at,$r0,$d1)
-+	mfhi	($t0,$r0,$d1)
-+	 addu	$h1,$h1,$a3
-+	 sltu	$a3,$h1,$a3
-+	multu	($rs3,$d2)		# d2*s3
-+	 addu	$h2,$h2,$a3
-+
-+	mflo	($a3,$rs3,$d2)
-+	mfhi	($t1,$rs3,$d2)
-+	 addu	$h1,$h1,$at
-+	 addu	$h2,$h2,$t0
-+	multu	($rs2,$d3)		# d3*s2
-+	 sltu	$at,$h1,$at
-+	 addu	$h2,$h2,$at
-+
-+	mflo	($at,$rs2,$d3)
-+	mfhi	($t0,$rs2,$d3)
-+	 addu	$h1,$h1,$a3
-+	 addu	$h2,$h2,$t1
-+	multu	($rs1,$h4)		# h4*s1
-+	 sltu	$a3,$h1,$a3
-+	 addu	$h2,$h2,$a3
-+
-+	mflo	($a3,$rs1,$h4)
-+	 addu	$h1,$h1,$at
-+	 addu	$h2,$h2,$t0
-+	multu	($r2,$d0)		# d0*r2
-+	 sltu	$at,$h1,$at
-+	 addu	$h2,$h2,$at
-+
-+
-+	mflo	($at,$r2,$d0)
-+	mfhi	($h3,$r2,$d0)
-+	 addu	$h1,$h1,$a3
-+	 sltu	$a3,$h1,$a3
-+	multu	($r1,$d1)		# d1*r1
-+	 addu	$h2,$h2,$a3
-+
-+	mflo	($a3,$r1,$d1)
-+	mfhi	($t1,$r1,$d1)
-+	 addu	$h2,$h2,$at
-+	 sltu	$at,$h2,$at
-+	multu	($r0,$d2)		# d2*r0
-+	 addu	$h3,$h3,$at
-+
-+	mflo	($at,$r0,$d2)
-+	mfhi	($t0,$r0,$d2)
-+	 addu	$h2,$h2,$a3
-+	 addu	$h3,$h3,$t1
-+	multu	($rs3,$d3)		# d3*s3
-+	 sltu	$a3,$h2,$a3
-+	 addu	$h3,$h3,$a3
-+
-+	mflo	($a3,$rs3,$d3)
-+	mfhi	($t1,$rs3,$d3)
-+	 addu	$h2,$h2,$at
-+	 addu	$h3,$h3,$t0
-+	multu	($rs2,$h4)		# h4*s2
-+	 sltu	$at,$h2,$at
-+	 addu	$h3,$h3,$at
-+
-+	mflo	($at,$rs2,$h4)
-+	 addu	$h2,$h2,$a3
-+	 addu	$h3,$h3,$t1
-+	multu	($r3,$d0)		# d0*r3
-+	 sltu	$a3,$h2,$a3
-+	 addu	$h3,$h3,$a3
-+
-+
-+	mflo	($a3,$r3,$d0)
-+	mfhi	($t1,$r3,$d0)
-+	 addu	$h2,$h2,$at
-+	 sltu	$at,$h2,$at
-+	multu	($r2,$d1)		# d1*r2
-+	 addu	$h3,$h3,$at
-+
-+	mflo	($at,$r2,$d1)
-+	mfhi	($t0,$r2,$d1)
-+	 addu	$h3,$h3,$a3
-+	 sltu	$a3,$h3,$a3
-+	multu	($r0,$d3)		# d3*r0
-+	 addu	$t1,$t1,$a3
-+
-+	mflo	($a3,$r0,$d3)
-+	mfhi	($d3,$r0,$d3)
-+	 addu	$h3,$h3,$at
-+	 addu	$t1,$t1,$t0
-+	multu	($r1,$d2)		# d2*r1
-+	 sltu	$at,$h3,$at
-+	 addu	$t1,$t1,$at
-+
-+	mflo	($at,$r1,$d2)
-+	mfhi	($t0,$r1,$d2)
-+	 addu	$h3,$h3,$a3
-+	 addu	$t1,$t1,$d3
-+	multu	($rs3,$h4)		# h4*s3
-+	 sltu	$a3,$h3,$a3
-+	 addu	$t1,$t1,$a3
-+
-+	mflo	($a3,$rs3,$h4)
-+	 addu	$h3,$h3,$at
-+	 addu	$t1,$t1,$t0
-+	multu	($r0,$h4)		# h4*r0
-+	 sltu	$at,$h3,$at
-+	 addu	$t1,$t1,$at
-+
-+
-+	mflo	($h4,$r0,$h4)
-+	 addu	$h3,$h3,$a3
-+	 sltu	$a3,$h3,$a3
-+	 addu	$t1,$t1,$a3
-+	addu	$h4,$h4,$t1
-+
-+	li	$padbit,1		# if we loop, padbit is 1
-+#endif
-+	bne	$inp,$len,.Loop
-+
-+	sw	$h0,0($ctx)		# store hash value
-+	sw	$h1,4($ctx)
-+	sw	$h2,8($ctx)
-+	sw	$h3,12($ctx)
-+	sw	$h4,16($ctx)
-+
-+	.set	noreorder
-+.Labort:
-+	lw	$s11,4*11($sp)
-+	lw	$s10,4*10($sp)
-+	lw	$s9, 4*9($sp)
-+	lw	$s8, 4*8($sp)
-+	lw	$s7, 4*7($sp)
-+	lw	$s6, 4*6($sp)
-+	lw	$s5, 4*5($sp)
-+	lw	$s4, 4*4($sp)
-+___
-+$code.=<<___ if ($flavour =~ /nubi/i);	# optimize non-nubi prologue
-+	lw	$s3, 4*3($sp)
-+	lw	$s2, 4*2($sp)
-+	lw	$s1, 4*1($sp)
-+	lw	$s0, 4*0($sp)
-+___
-+$code.=<<___;
-+	jr	$ra
-+	addu	$sp,$sp,4*12
-+.end	poly1305_blocks
-+___
-+}
-+{
-+my ($ctx,$mac,$nonce,$tmp4) = ($a0,$a1,$a2,$a3);
-+
-+$code.=<<___;
-+.align	5
-+.globl	poly1305_emit
-+.ent	poly1305_emit
-+poly1305_emit:
-+	.frame	$sp,0,$ra
-+	.set	reorder
-+
-+	lw	$tmp4,16($ctx)
-+	lw	$tmp0,0($ctx)
-+	lw	$tmp1,4($ctx)
-+	lw	$tmp2,8($ctx)
-+	lw	$tmp3,12($ctx)
-+
-+	li	$in0,-4			# final reduction
-+	srl	$ctx,$tmp4,2
-+	and	$in0,$in0,$tmp4
-+	andi	$tmp4,$tmp4,3
-+	addu	$ctx,$ctx,$in0
-+
-+	addu	$tmp0,$tmp0,$ctx
-+	sltu	$ctx,$tmp0,$ctx
-+	 addiu	$in0,$tmp0,5		# compare to modulus
-+	addu	$tmp1,$tmp1,$ctx
-+	 sltiu	$in1,$in0,5
-+	sltu	$ctx,$tmp1,$ctx
-+	 addu	$in1,$in1,$tmp1
-+	addu	$tmp2,$tmp2,$ctx
-+	 sltu	$in2,$in1,$tmp1
-+	sltu	$ctx,$tmp2,$ctx
-+	 addu	$in2,$in2,$tmp2
-+	addu	$tmp3,$tmp3,$ctx
-+	 sltu	$in3,$in2,$tmp2
-+	sltu	$ctx,$tmp3,$ctx
-+	 addu	$in3,$in3,$tmp3
-+	addu	$tmp4,$tmp4,$ctx
-+	 sltu	$ctx,$in3,$tmp3
-+	 addu	$ctx,$tmp4
-+
-+	srl	$ctx,2			# see if it carried/borrowed
-+	subu	$ctx,$zero,$ctx
-+
-+	xor	$in0,$tmp0
-+	xor	$in1,$tmp1
-+	xor	$in2,$tmp2
-+	xor	$in3,$tmp3
-+	and	$in0,$ctx
-+	and	$in1,$ctx
-+	and	$in2,$ctx
-+	and	$in3,$ctx
-+	xor	$in0,$tmp0
-+	xor	$in1,$tmp1
-+	xor	$in2,$tmp2
-+	xor	$in3,$tmp3
-+
-+	lw	$tmp0,0($nonce)		# load nonce
-+	lw	$tmp1,4($nonce)
-+	lw	$tmp2,8($nonce)
-+	lw	$tmp3,12($nonce)
-+
-+	addu	$in0,$tmp0		# accumulate nonce
-+	sltu	$ctx,$in0,$tmp0
-+
-+	addu	$in1,$tmp1
-+	sltu	$tmp1,$in1,$tmp1
-+	addu	$in1,$ctx
-+	sltu	$ctx,$in1,$ctx
-+	addu	$ctx,$tmp1
-+
-+	addu	$in2,$tmp2
-+	sltu	$tmp2,$in2,$tmp2
-+	addu	$in2,$ctx
-+	sltu	$ctx,$in2,$ctx
-+	addu	$ctx,$tmp2
-+
-+	addu	$in3,$tmp3
-+	addu	$in3,$ctx
-+
-+	srl	$tmp0,$in0,8		# write mac value
-+	srl	$tmp1,$in0,16
-+	srl	$tmp2,$in0,24
-+	sb	$in0, 0($mac)
-+	sb	$tmp0,1($mac)
-+	srl	$tmp0,$in1,8
-+	sb	$tmp1,2($mac)
-+	srl	$tmp1,$in1,16
-+	sb	$tmp2,3($mac)
-+	srl	$tmp2,$in1,24
-+	sb	$in1, 4($mac)
-+	sb	$tmp0,5($mac)
-+	srl	$tmp0,$in2,8
-+	sb	$tmp1,6($mac)
-+	srl	$tmp1,$in2,16
-+	sb	$tmp2,7($mac)
-+	srl	$tmp2,$in2,24
-+	sb	$in2, 8($mac)
-+	sb	$tmp0,9($mac)
-+	srl	$tmp0,$in3,8
-+	sb	$tmp1,10($mac)
-+	srl	$tmp1,$in3,16
-+	sb	$tmp2,11($mac)
-+	srl	$tmp2,$in3,24
-+	sb	$in3, 12($mac)
-+	sb	$tmp0,13($mac)
-+	sb	$tmp1,14($mac)
-+	sb	$tmp2,15($mac)
-+
-+	jr	$ra
-+.end	poly1305_emit
-+.rdata
-+.asciiz	"Poly1305 for MIPS32, CRYPTOGAMS by \@dot-asm"
-+.align	2
-+___
-+}
-+}}}
-+
-+$output=pop and open STDOUT,">$output";
-+print $code;
-+close STDOUT;
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -707,6 +707,11 @@ config CRYPTO_POLY1305_X86_64
- 	  in IETF protocols. This is the x86_64 assembler implementation using SIMD
- 	  instructions.
- 
-+config CRYPTO_POLY1305_MIPS
-+	tristate "Poly1305 authenticator algorithm (MIPS optimized)"
-+	depends on CPU_MIPS32 || (CPU_MIPS64 && 64BIT)
-+	select CRYPTO_ARCH_HAVE_LIB_POLY1305
-+
- config CRYPTO_MD4
- 	tristate "MD4 digest algorithm"
- 	select CRYPTO_HASH
---- a/lib/crypto/Kconfig
-+++ b/lib/crypto/Kconfig
-@@ -39,6 +39,7 @@ config CRYPTO_LIB_DES
- 
- config CRYPTO_LIB_POLY1305_RSIZE
- 	int
-+	default 2 if MIPS
- 	default 4 if X86_64
- 	default 9 if ARM || ARM64
- 	default 1
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0021-crypto-blake2s-generic-C-library-implementation-and-.patch b/target/linux/generic/backport-5.4/080-wireguard-0021-crypto-blake2s-generic-C-library-implementation-and-.patch
deleted file mode 100644
index 97f73b983a..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0021-crypto-blake2s-generic-C-library-implementation-and-.patch
+++ /dev/null
@@ -1,1097 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 8 Nov 2019 13:22:28 +0100
-Subject: [PATCH] crypto: blake2s - generic C library implementation and
- selftest
-
-commit 66d7fb94e4ffe5acc589e0b2b4710aecc1f07a28 upstream.
-
-The C implementation was originally based on Samuel Neves' public
-domain reference implementation but has since been heavily modified
-for the kernel. We're able to do compile-time optimizations by moving
-some scaffolding around the final function into the header file.
-
-Information: https://blake2.net/
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
-Co-developed-by: Samuel Neves <sneves@dei.uc.pt>
-[ardb: - move from lib/zinc to lib/crypto
-       - remove simd handling
-       - rewrote selftest for better coverage
-       - use fixed digest length for blake2s_hmac() and rename to
-         blake2s256_hmac() ]
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- include/crypto/blake2s.h          | 106 +++++
- include/crypto/internal/blake2s.h |  19 +
- lib/crypto/Kconfig                |  25 ++
- lib/crypto/Makefile               |  10 +
- lib/crypto/blake2s-generic.c      | 111 ++++++
- lib/crypto/blake2s-selftest.c     | 622 ++++++++++++++++++++++++++++++
- lib/crypto/blake2s.c              | 126 ++++++
- 7 files changed, 1019 insertions(+)
- create mode 100644 include/crypto/blake2s.h
- create mode 100644 include/crypto/internal/blake2s.h
- create mode 100644 lib/crypto/blake2s-generic.c
- create mode 100644 lib/crypto/blake2s-selftest.c
- create mode 100644 lib/crypto/blake2s.c
-
---- /dev/null
-+++ b/include/crypto/blake2s.h
-@@ -0,0 +1,106 @@
-+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifndef BLAKE2S_H
-+#define BLAKE2S_H
-+
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+
-+#include <asm/bug.h>
-+
-+enum blake2s_lengths {
-+	BLAKE2S_BLOCK_SIZE = 64,
-+	BLAKE2S_HASH_SIZE = 32,
-+	BLAKE2S_KEY_SIZE = 32,
-+
-+	BLAKE2S_128_HASH_SIZE = 16,
-+	BLAKE2S_160_HASH_SIZE = 20,
-+	BLAKE2S_224_HASH_SIZE = 28,
-+	BLAKE2S_256_HASH_SIZE = 32,
-+};
-+
-+struct blake2s_state {
-+	u32 h[8];
-+	u32 t[2];
-+	u32 f[2];
-+	u8 buf[BLAKE2S_BLOCK_SIZE];
-+	unsigned int buflen;
-+	unsigned int outlen;
-+};
-+
-+enum blake2s_iv {
-+	BLAKE2S_IV0 = 0x6A09E667UL,
-+	BLAKE2S_IV1 = 0xBB67AE85UL,
-+	BLAKE2S_IV2 = 0x3C6EF372UL,
-+	BLAKE2S_IV3 = 0xA54FF53AUL,
-+	BLAKE2S_IV4 = 0x510E527FUL,
-+	BLAKE2S_IV5 = 0x9B05688CUL,
-+	BLAKE2S_IV6 = 0x1F83D9ABUL,
-+	BLAKE2S_IV7 = 0x5BE0CD19UL,
-+};
-+
-+void blake2s_update(struct blake2s_state *state, const u8 *in, size_t inlen);
-+void blake2s_final(struct blake2s_state *state, u8 *out);
-+
-+static inline void blake2s_init_param(struct blake2s_state *state,
-+				      const u32 param)
-+{
-+	*state = (struct blake2s_state){{
-+		BLAKE2S_IV0 ^ param,
-+		BLAKE2S_IV1,
-+		BLAKE2S_IV2,
-+		BLAKE2S_IV3,
-+		BLAKE2S_IV4,
-+		BLAKE2S_IV5,
-+		BLAKE2S_IV6,
-+		BLAKE2S_IV7,
-+	}};
-+}
-+
-+static inline void blake2s_init(struct blake2s_state *state,
-+				const size_t outlen)
-+{
-+	blake2s_init_param(state, 0x01010000 | outlen);
-+	state->outlen = outlen;
-+}
-+
-+static inline void blake2s_init_key(struct blake2s_state *state,
-+				    const size_t outlen, const void *key,
-+				    const size_t keylen)
-+{
-+	WARN_ON(IS_ENABLED(DEBUG) && (!outlen || outlen > BLAKE2S_HASH_SIZE ||
-+		!key || !keylen || keylen > BLAKE2S_KEY_SIZE));
-+
-+	blake2s_init_param(state, 0x01010000 | keylen << 8 | outlen);
-+	memcpy(state->buf, key, keylen);
-+	state->buflen = BLAKE2S_BLOCK_SIZE;
-+	state->outlen = outlen;
-+}
-+
-+static inline void blake2s(u8 *out, const u8 *in, const u8 *key,
-+			   const size_t outlen, const size_t inlen,
-+			   const size_t keylen)
-+{
-+	struct blake2s_state state;
-+
-+	WARN_ON(IS_ENABLED(DEBUG) && ((!in && inlen > 0) || !out || !outlen ||
-+		outlen > BLAKE2S_HASH_SIZE || keylen > BLAKE2S_KEY_SIZE ||
-+		(!key && keylen)));
-+
-+	if (keylen)
-+		blake2s_init_key(&state, outlen, key, keylen);
-+	else
-+		blake2s_init(&state, outlen);
-+
-+	blake2s_update(&state, in, inlen);
-+	blake2s_final(&state, out);
-+}
-+
-+void blake2s256_hmac(u8 *out, const u8 *in, const u8 *key, const size_t inlen,
-+		     const size_t keylen);
-+
-+#endif /* BLAKE2S_H */
---- /dev/null
-+++ b/include/crypto/internal/blake2s.h
-@@ -0,0 +1,19 @@
-+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
-+
-+#ifndef BLAKE2S_INTERNAL_H
-+#define BLAKE2S_INTERNAL_H
-+
-+#include <crypto/blake2s.h>
-+
-+void blake2s_compress_generic(struct blake2s_state *state,const u8 *block,
-+			      size_t nblocks, const u32 inc);
-+
-+void blake2s_compress_arch(struct blake2s_state *state,const u8 *block,
-+			   size_t nblocks, const u32 inc);
-+
-+static inline void blake2s_set_lastblock(struct blake2s_state *state)
-+{
-+	state->f[0] = -1;
-+}
-+
-+#endif /* BLAKE2S_INTERNAL_H */
---- a/lib/crypto/Kconfig
-+++ b/lib/crypto/Kconfig
-@@ -8,6 +8,31 @@ config CRYPTO_LIB_AES
- config CRYPTO_LIB_ARC4
- 	tristate
- 
-+config CRYPTO_ARCH_HAVE_LIB_BLAKE2S
-+	tristate
-+	help
-+	  Declares whether the architecture provides an arch-specific
-+	  accelerated implementation of the Blake2s library interface,
-+	  either builtin or as a module.
-+
-+config CRYPTO_LIB_BLAKE2S_GENERIC
-+	tristate
-+	help
-+	  This symbol can be depended upon by arch implementations of the
-+	  Blake2s library interface that require the generic code as a
-+	  fallback, e.g., for SIMD implementations. If no arch specific
-+	  implementation is enabled, this implementation serves the users
-+	  of CRYPTO_LIB_BLAKE2S.
-+
-+config CRYPTO_LIB_BLAKE2S
-+	tristate "BLAKE2s hash function library"
-+	depends on CRYPTO_ARCH_HAVE_LIB_BLAKE2S || !CRYPTO_ARCH_HAVE_LIB_BLAKE2S
-+	select CRYPTO_LIB_BLAKE2S_GENERIC if CRYPTO_ARCH_HAVE_LIB_BLAKE2S=n
-+	help
-+	  Enable the Blake2s library interface. This interface may be fulfilled
-+	  by either the generic implementation or an arch-specific one, if one
-+	  is available and enabled.
-+
- config CRYPTO_ARCH_HAVE_LIB_CHACHA
- 	tristate
- 	help
---- a/lib/crypto/Makefile
-+++ b/lib/crypto/Makefile
-@@ -10,6 +10,12 @@ libaes-y					:= aes.o
- obj-$(CONFIG_CRYPTO_LIB_ARC4)			+= libarc4.o
- libarc4-y					:= arc4.o
- 
-+obj-$(CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC)	+= libblake2s-generic.o
-+libblake2s-generic-y				+= blake2s-generic.o
-+
-+obj-$(CONFIG_CRYPTO_LIB_BLAKE2S)		+= libblake2s.o
-+libblake2s-y					+= blake2s.o
-+
- obj-$(CONFIG_CRYPTO_LIB_DES)			+= libdes.o
- libdes-y					:= des.o
- 
-@@ -18,3 +24,7 @@ libpoly1305-y					:= poly1305.o
- 
- obj-$(CONFIG_CRYPTO_LIB_SHA256)			+= libsha256.o
- libsha256-y					:= sha256.o
-+
-+ifneq ($(CONFIG_CRYPTO_MANAGER_DISABLE_TESTS),y)
-+libblake2s-y					+= blake2s-selftest.o
-+endif
---- /dev/null
-+++ b/lib/crypto/blake2s-generic.c
-@@ -0,0 +1,111 @@
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ *
-+ * This is an implementation of the BLAKE2s hash and PRF functions.
-+ *
-+ * Information: https://blake2.net/
-+ *
-+ */
-+
-+#include <crypto/internal/blake2s.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/bug.h>
-+#include <asm/unaligned.h>
-+
-+static const u8 blake2s_sigma[10][16] = {
-+	{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 },
-+	{ 14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3 },
-+	{ 11, 8, 12, 0, 5, 2, 15, 13, 10, 14, 3, 6, 7, 1, 9, 4 },
-+	{ 7, 9, 3, 1, 13, 12, 11, 14, 2, 6, 5, 10, 4, 0, 15, 8 },
-+	{ 9, 0, 5, 7, 2, 4, 10, 15, 14, 1, 11, 12, 6, 8, 3, 13 },
-+	{ 2, 12, 6, 10, 0, 11, 8, 3, 4, 13, 7, 5, 15, 14, 1, 9 },
-+	{ 12, 5, 1, 15, 14, 13, 4, 10, 0, 7, 6, 3, 9, 2, 8, 11 },
-+	{ 13, 11, 7, 14, 12, 1, 3, 9, 5, 0, 15, 4, 8, 6, 2, 10 },
-+	{ 6, 15, 14, 9, 11, 3, 0, 8, 12, 2, 13, 7, 1, 4, 10, 5 },
-+	{ 10, 2, 8, 4, 7, 6, 1, 5, 15, 11, 9, 14, 3, 12, 13, 0 },
-+};
-+
-+static inline void blake2s_increment_counter(struct blake2s_state *state,
-+					     const u32 inc)
-+{
-+	state->t[0] += inc;
-+	state->t[1] += (state->t[0] < inc);
-+}
-+
-+void blake2s_compress_generic(struct blake2s_state *state,const u8 *block,
-+			      size_t nblocks, const u32 inc)
-+{
-+	u32 m[16];
-+	u32 v[16];
-+	int i;
-+
-+	WARN_ON(IS_ENABLED(DEBUG) &&
-+		(nblocks > 1 && inc != BLAKE2S_BLOCK_SIZE));
-+
-+	while (nblocks > 0) {
-+		blake2s_increment_counter(state, inc);
-+		memcpy(m, block, BLAKE2S_BLOCK_SIZE);
-+		le32_to_cpu_array(m, ARRAY_SIZE(m));
-+		memcpy(v, state->h, 32);
-+		v[ 8] = BLAKE2S_IV0;
-+		v[ 9] = BLAKE2S_IV1;
-+		v[10] = BLAKE2S_IV2;
-+		v[11] = BLAKE2S_IV3;
-+		v[12] = BLAKE2S_IV4 ^ state->t[0];
-+		v[13] = BLAKE2S_IV5 ^ state->t[1];
-+		v[14] = BLAKE2S_IV6 ^ state->f[0];
-+		v[15] = BLAKE2S_IV7 ^ state->f[1];
-+
-+#define G(r, i, a, b, c, d) do { \
-+	a += b + m[blake2s_sigma[r][2 * i + 0]]; \
-+	d = ror32(d ^ a, 16); \
-+	c += d; \
-+	b = ror32(b ^ c, 12); \
-+	a += b + m[blake2s_sigma[r][2 * i + 1]]; \
-+	d = ror32(d ^ a, 8); \
-+	c += d; \
-+	b = ror32(b ^ c, 7); \
-+} while (0)
-+
-+#define ROUND(r) do { \
-+	G(r, 0, v[0], v[ 4], v[ 8], v[12]); \
-+	G(r, 1, v[1], v[ 5], v[ 9], v[13]); \
-+	G(r, 2, v[2], v[ 6], v[10], v[14]); \
-+	G(r, 3, v[3], v[ 7], v[11], v[15]); \
-+	G(r, 4, v[0], v[ 5], v[10], v[15]); \
-+	G(r, 5, v[1], v[ 6], v[11], v[12]); \
-+	G(r, 6, v[2], v[ 7], v[ 8], v[13]); \
-+	G(r, 7, v[3], v[ 4], v[ 9], v[14]); \
-+} while (0)
-+		ROUND(0);
-+		ROUND(1);
-+		ROUND(2);
-+		ROUND(3);
-+		ROUND(4);
-+		ROUND(5);
-+		ROUND(6);
-+		ROUND(7);
-+		ROUND(8);
-+		ROUND(9);
-+
-+#undef G
-+#undef ROUND
-+
-+		for (i = 0; i < 8; ++i)
-+			state->h[i] ^= v[i] ^ v[i + 8];
-+
-+		block += BLAKE2S_BLOCK_SIZE;
-+		--nblocks;
-+	}
-+}
-+
-+EXPORT_SYMBOL(blake2s_compress_generic);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("BLAKE2s hash function");
-+MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
---- /dev/null
-+++ b/lib/crypto/blake2s-selftest.c
-@@ -0,0 +1,622 @@
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include <crypto/blake2s.h>
-+#include <linux/string.h>
-+
-+/*
-+ * blake2s_testvecs[] generated with the program below (using libb2-dev and
-+ * libssl-dev [OpenSSL])
-+ *
-+ * #include <blake2.h>
-+ * #include <stdint.h>
-+ * #include <stdio.h>
-+ *
-+ * #include <openssl/evp.h>
-+ * #include <openssl/hmac.h>
-+ *
-+ * #define BLAKE2S_TESTVEC_COUNT	256
-+ *
-+ * static void print_vec(const uint8_t vec[], int len)
-+ * {
-+ *	int i;
-+ *
-+ *	printf("  { ");
-+ *	for (i = 0; i < len; i++) {
-+ *		if (i && (i % 12) == 0)
-+ *			printf("\n    ");
-+ *		printf("0x%02x, ", vec[i]);
-+ *	}
-+ *	printf("},\n");
-+ * }
-+ *
-+ * int main(void)
-+ * {
-+ *	uint8_t key[BLAKE2S_KEYBYTES];
-+ *	uint8_t buf[BLAKE2S_TESTVEC_COUNT];
-+ *	uint8_t hash[BLAKE2S_OUTBYTES];
-+ *	int i, j;
-+ *
-+ *	key[0] = key[1] = 1;
-+ *	for (i = 2; i < BLAKE2S_KEYBYTES; ++i)
-+ *		key[i] = key[i - 2] + key[i - 1];
-+ *
-+ *	for (i = 0; i < BLAKE2S_TESTVEC_COUNT; ++i)
-+ *		buf[i] = (uint8_t)i;
-+ *
-+ *	printf("static const u8 blake2s_testvecs[][BLAKE2S_HASH_SIZE] __initconst = {\n");
-+ *
-+ *	for (i = 0; i < BLAKE2S_TESTVEC_COUNT; ++i) {
-+ *		int outlen = 1 + i % BLAKE2S_OUTBYTES;
-+ *		int keylen = (13 * i) % (BLAKE2S_KEYBYTES + 1);
-+ *
-+ *		blake2s(hash, buf, key + BLAKE2S_KEYBYTES - keylen, outlen, i,
-+ *			keylen);
-+ *		print_vec(hash, outlen);
-+ *	}
-+ *	printf("};\n\n");
-+ *
-+ *	printf("static const u8 blake2s_hmac_testvecs[][BLAKE2S_HASH_SIZE] __initconst = {\n");
-+ *
-+ *	HMAC(EVP_blake2s256(), key, sizeof(key), buf, sizeof(buf), hash, NULL);
-+ *	print_vec(hash, BLAKE2S_OUTBYTES);
-+ *
-+ *	HMAC(EVP_blake2s256(), buf, sizeof(buf), key, sizeof(key), hash, NULL);
-+ *	print_vec(hash, BLAKE2S_OUTBYTES);
-+ *
-+ *	printf("};\n");
-+ *
-+ *	return 0;
-+ *}
-+ */
-+static const u8 blake2s_testvecs[][BLAKE2S_HASH_SIZE] __initconst = {
-+  { 0xa1, },
-+  { 0x7c, 0x89, },
-+  { 0x74, 0x0e, 0xd4, },
-+  { 0x47, 0x0c, 0x21, 0x15, },
-+  { 0x18, 0xd6, 0x9c, 0xa6, 0xc4, },
-+  { 0x13, 0x5d, 0x16, 0x63, 0x2e, 0xf9, },
-+  { 0x2c, 0xb5, 0x04, 0xb7, 0x99, 0xe2, 0x73, },
-+  { 0x9a, 0x0f, 0xd2, 0x39, 0xd6, 0x68, 0x1b, 0x92, },
-+  { 0xc8, 0xde, 0x7a, 0xea, 0x2f, 0xf4, 0xd2, 0xe3, 0x2b, },
-+  { 0x5b, 0xf9, 0x43, 0x52, 0x0c, 0x12, 0xba, 0xb5, 0x93, 0x9f, },
-+  { 0xc6, 0x2c, 0x4e, 0x80, 0xfc, 0x32, 0x5b, 0x33, 0xb8, 0xb8, 0x0a, },
-+  { 0xa7, 0x5c, 0xfd, 0x3a, 0xcc, 0xbf, 0x90, 0xca, 0xb7, 0x97, 0xde, 0xd8, },
-+  { 0x66, 0xca, 0x3c, 0xc4, 0x19, 0xef, 0x92, 0x66, 0x3f, 0x21, 0x8f, 0xda,
-+    0xb7, },
-+  { 0xba, 0xe5, 0xbb, 0x30, 0x25, 0x94, 0x6d, 0xc3, 0x89, 0x09, 0xc4, 0x25,
-+    0x52, 0x3e, },
-+  { 0xa2, 0xef, 0x0e, 0x52, 0x0b, 0x5f, 0xa2, 0x01, 0x6d, 0x0a, 0x25, 0xbc,
-+    0x57, 0xe2, 0x27, },
-+  { 0x4f, 0xe0, 0xf9, 0x52, 0x12, 0xda, 0x84, 0xb7, 0xab, 0xae, 0xb0, 0xa6,
-+    0x47, 0x2a, 0xc7, 0xf5, },
-+  { 0x56, 0xe7, 0xa8, 0x1c, 0x4c, 0xca, 0xed, 0x90, 0x31, 0xec, 0x87, 0x43,
-+    0xe7, 0x72, 0x08, 0xec, 0xbe, },
-+  { 0x7e, 0xdf, 0x80, 0x1c, 0x93, 0x33, 0xfd, 0x53, 0x44, 0xba, 0xfd, 0x96,
-+    0xe1, 0xbb, 0xb5, 0x65, 0xa5, 0x00, },
-+  { 0xec, 0x6b, 0xed, 0xf7, 0x7b, 0x62, 0x1d, 0x7d, 0xf4, 0x82, 0xf3, 0x1e,
-+    0x18, 0xff, 0x2b, 0xc4, 0x06, 0x20, 0x2a, },
-+  { 0x74, 0x98, 0xd7, 0x68, 0x63, 0xed, 0x87, 0xe4, 0x5d, 0x8d, 0x9e, 0x1d,
-+    0xfd, 0x2a, 0xbb, 0x86, 0xac, 0xe9, 0x2a, 0x89, },
-+  { 0x89, 0xc3, 0x88, 0xce, 0x2b, 0x33, 0x1e, 0x10, 0xd1, 0x37, 0x20, 0x86,
-+    0x28, 0x43, 0x70, 0xd9, 0xfb, 0x96, 0xd9, 0xb5, 0xd3, },
-+  { 0xcb, 0x56, 0x74, 0x41, 0x8d, 0x80, 0x01, 0x9a, 0x6b, 0x38, 0xe1, 0x41,
-+    0xad, 0x9c, 0x62, 0x74, 0xce, 0x35, 0xd5, 0x6c, 0x89, 0x6e, },
-+  { 0x79, 0xaf, 0x94, 0x59, 0x99, 0x26, 0xe1, 0xc9, 0x34, 0xfe, 0x7c, 0x22,
-+    0xf7, 0x43, 0xd7, 0x65, 0xd4, 0x48, 0x18, 0xac, 0x3d, 0xfd, 0x93, },
-+  { 0x85, 0x0d, 0xff, 0xb8, 0x3e, 0x87, 0x41, 0xb0, 0x95, 0xd3, 0x3d, 0x00,
-+    0x47, 0x55, 0x9e, 0xd2, 0x69, 0xea, 0xbf, 0xe9, 0x7a, 0x2d, 0x61, 0x45, },
-+  { 0x03, 0xe0, 0x85, 0xec, 0x54, 0xb5, 0x16, 0x53, 0xa8, 0xc4, 0x71, 0xe9,
-+    0x6a, 0xe7, 0xcb, 0xc4, 0x15, 0x02, 0xfc, 0x34, 0xa4, 0xa4, 0x28, 0x13,
-+    0xd1, },
-+  { 0xe3, 0x34, 0x4b, 0xe1, 0xd0, 0x4b, 0x55, 0x61, 0x8f, 0xc0, 0x24, 0x05,
-+    0xe6, 0xe0, 0x3d, 0x70, 0x24, 0x4d, 0xda, 0xb8, 0x91, 0x05, 0x29, 0x07,
-+    0x01, 0x3e, },
-+  { 0x61, 0xff, 0x01, 0x72, 0xb1, 0x4d, 0xf6, 0xfe, 0xd1, 0xd1, 0x08, 0x74,
-+    0xe6, 0x91, 0x44, 0xeb, 0x61, 0xda, 0x40, 0xaf, 0xfc, 0x8c, 0x91, 0x6b,
-+    0xec, 0x13, 0xed, },
-+  { 0xd4, 0x40, 0xd2, 0xa0, 0x7f, 0xc1, 0x58, 0x0c, 0x85, 0xa0, 0x86, 0xc7,
-+    0x86, 0xb9, 0x61, 0xc9, 0xea, 0x19, 0x86, 0x1f, 0xab, 0x07, 0xce, 0x37,
-+    0x72, 0x67, 0x09, 0xfc, },
-+  { 0x9e, 0xf8, 0x18, 0x67, 0x93, 0x10, 0x9b, 0x39, 0x75, 0xe8, 0x8b, 0x38,
-+    0x82, 0x7d, 0xb8, 0xb7, 0xa5, 0xaf, 0xe6, 0x6a, 0x22, 0x5e, 0x1f, 0x9c,
-+    0x95, 0x29, 0x19, 0xf2, 0x4b, },
-+  { 0xc8, 0x62, 0x25, 0xf5, 0x98, 0xc9, 0xea, 0xe5, 0x29, 0x3a, 0xd3, 0x22,
-+    0xeb, 0xeb, 0x07, 0x7c, 0x15, 0x07, 0xee, 0x15, 0x61, 0xbb, 0x05, 0x30,
-+    0x99, 0x7f, 0x11, 0xf6, 0x0a, 0x1d, },
-+  { 0x68, 0x70, 0xf7, 0x90, 0xa1, 0x8b, 0x1f, 0x0f, 0xbb, 0xce, 0xd2, 0x0e,
-+    0x33, 0x1f, 0x7f, 0xa9, 0x78, 0xa8, 0xa6, 0x81, 0x66, 0xab, 0x8d, 0xcd,
-+    0x58, 0x55, 0x3a, 0x0b, 0x7a, 0xdb, 0xb5, },
-+  { 0xdd, 0x35, 0xd2, 0xb4, 0xf6, 0xc7, 0xea, 0xab, 0x64, 0x24, 0x4e, 0xfe,
-+    0xe5, 0x3d, 0x4e, 0x95, 0x8b, 0x6d, 0x6c, 0xbc, 0xb0, 0xf8, 0x88, 0x61,
-+    0x09, 0xb7, 0x78, 0xa3, 0x31, 0xfe, 0xd9, 0x2f, },
-+  { 0x0a, },
-+  { 0x6e, 0xd4, },
-+  { 0x64, 0xe9, 0xd1, },
-+  { 0x30, 0xdd, 0x71, 0xef, },
-+  { 0x11, 0xb5, 0x0c, 0x87, 0xc9, },
-+  { 0x06, 0x1c, 0x6d, 0x04, 0x82, 0xd0, },
-+  { 0x5c, 0x42, 0x0b, 0xee, 0xc5, 0x9c, 0xb2, },
-+  { 0xe8, 0x29, 0xd6, 0xb4, 0x5d, 0xf7, 0x2b, 0x93, },
-+  { 0x18, 0xca, 0x27, 0x72, 0x43, 0x39, 0x16, 0xbc, 0x6a, },
-+  { 0x39, 0x8f, 0xfd, 0x64, 0xf5, 0x57, 0x23, 0xb0, 0x45, 0xf8, },
-+  { 0xbb, 0x3a, 0x78, 0x6b, 0x02, 0x1d, 0x0b, 0x16, 0xe3, 0xb2, 0x9a, },
-+  { 0xb8, 0xb4, 0x0b, 0xe5, 0xd4, 0x1d, 0x0d, 0x85, 0x49, 0x91, 0x35, 0xfa, },
-+  { 0x6d, 0x48, 0x2a, 0x0c, 0x42, 0x08, 0xbd, 0xa9, 0x78, 0x6f, 0x18, 0xaf,
-+    0xe2, },
-+  { 0x10, 0x45, 0xd4, 0x58, 0x88, 0xec, 0x4e, 0x1e, 0xf6, 0x14, 0x92, 0x64,
-+    0x7e, 0xb0, },
-+  { 0x8b, 0x0b, 0x95, 0xee, 0x92, 0xc6, 0x3b, 0x91, 0xf1, 0x1e, 0xeb, 0x51,
-+    0x98, 0x0a, 0x8d, },
-+  { 0xa3, 0x50, 0x4d, 0xa5, 0x1d, 0x03, 0x68, 0xe9, 0x57, 0x78, 0xd6, 0x04,
-+    0xf1, 0xc3, 0x94, 0xd8, },
-+  { 0xb8, 0x66, 0x6e, 0xdd, 0x46, 0x15, 0xae, 0x3d, 0x83, 0x7e, 0xcf, 0xe7,
-+    0x2c, 0xe8, 0x8f, 0xc7, 0x34, },
-+  { 0x2e, 0xc0, 0x1f, 0x29, 0xea, 0xf6, 0xb9, 0xe2, 0xc2, 0x93, 0xeb, 0x41,
-+    0x0d, 0xf0, 0x0a, 0x13, 0x0e, 0xa2, },
-+  { 0x71, 0xb8, 0x33, 0xa9, 0x1b, 0xac, 0xf1, 0xb5, 0x42, 0x8f, 0x5e, 0x81,
-+    0x34, 0x43, 0xb7, 0xa4, 0x18, 0x5c, 0x47, },
-+  { 0xda, 0x45, 0xb8, 0x2e, 0x82, 0x1e, 0xc0, 0x59, 0x77, 0x9d, 0xfa, 0xb4,
-+    0x1c, 0x5e, 0xa0, 0x2b, 0x33, 0x96, 0x5a, 0x58, },
-+  { 0xe3, 0x09, 0x05, 0xa9, 0xeb, 0x48, 0x13, 0xad, 0x71, 0x88, 0x81, 0x9a,
-+    0x3e, 0x2c, 0xe1, 0x23, 0x99, 0x13, 0x35, 0x9f, 0xb5, },
-+  { 0xb7, 0x86, 0x2d, 0x16, 0xe1, 0x04, 0x00, 0x47, 0x47, 0x61, 0x31, 0xfb,
-+    0x14, 0xac, 0xd8, 0xe9, 0xe3, 0x49, 0xbd, 0xf7, 0x9c, 0x3f, },
-+  { 0x7f, 0xd9, 0x95, 0xa8, 0xa7, 0xa0, 0xcc, 0xba, 0xef, 0xb1, 0x0a, 0xa9,
-+    0x21, 0x62, 0x08, 0x0f, 0x1b, 0xff, 0x7b, 0x9d, 0xae, 0xb2, 0x95, },
-+  { 0x85, 0x99, 0xea, 0x33, 0xe0, 0x56, 0xff, 0x13, 0xc6, 0x61, 0x8c, 0xf9,
-+    0x57, 0x05, 0x03, 0x11, 0xf9, 0xfb, 0x3a, 0xf7, 0xce, 0xbb, 0x52, 0x30, },
-+  { 0xb2, 0x72, 0x9c, 0xf8, 0x77, 0x4e, 0x8f, 0x6b, 0x01, 0x6c, 0xff, 0x4e,
-+    0x4f, 0x02, 0xd2, 0xbc, 0xeb, 0x51, 0x28, 0x99, 0x50, 0xab, 0xc4, 0x42,
-+    0xe3, },
-+  { 0x8b, 0x0a, 0xb5, 0x90, 0x8f, 0xf5, 0x7b, 0xdd, 0xba, 0x47, 0x37, 0xc9,
-+    0x2a, 0xd5, 0x4b, 0x25, 0x08, 0x8b, 0x02, 0x17, 0xa7, 0x9e, 0x6b, 0x6e,
-+    0xe3, 0x90, },
-+  { 0x90, 0xdd, 0xf7, 0x75, 0xa7, 0xa3, 0x99, 0x5e, 0x5b, 0x7d, 0x75, 0xc3,
-+    0x39, 0x6b, 0xa0, 0xe2, 0x44, 0x53, 0xb1, 0x9e, 0xc8, 0xf1, 0x77, 0x10,
-+    0x58, 0x06, 0x9a, },
-+  { 0x99, 0x52, 0xf0, 0x49, 0xa8, 0x8c, 0xec, 0xa6, 0x97, 0x32, 0x13, 0xb5,
-+    0xf7, 0xa3, 0x8e, 0xfb, 0x4b, 0x59, 0x31, 0x3d, 0x01, 0x59, 0x98, 0x5d,
-+    0x53, 0x03, 0x1a, 0x39, },
-+  { 0x9f, 0xe0, 0xc2, 0xe5, 0x5d, 0x93, 0xd6, 0x9b, 0x47, 0x8f, 0x9b, 0xe0,
-+    0x26, 0x35, 0x84, 0x20, 0x1d, 0xc5, 0x53, 0x10, 0x0f, 0x22, 0xb9, 0xb5,
-+    0xd4, 0x36, 0xb1, 0xac, 0x73, },
-+  { 0x30, 0x32, 0x20, 0x3b, 0x10, 0x28, 0xec, 0x1f, 0x4f, 0x9b, 0x47, 0x59,
-+    0xeb, 0x7b, 0xee, 0x45, 0xfb, 0x0c, 0x49, 0xd8, 0x3d, 0x69, 0xbd, 0x90,
-+    0x2c, 0xf0, 0x9e, 0x8d, 0xbf, 0xd5, },
-+  { 0x2a, 0x37, 0x73, 0x7f, 0xf9, 0x96, 0x19, 0xaa, 0x25, 0xd8, 0x13, 0x28,
-+    0x01, 0x29, 0x89, 0xdf, 0x6e, 0x0c, 0x9b, 0x43, 0x44, 0x51, 0xe9, 0x75,
-+    0x26, 0x0c, 0xb7, 0x87, 0x66, 0x0b, 0x5f, },
-+  { 0x23, 0xdf, 0x96, 0x68, 0x91, 0x86, 0xd0, 0x93, 0x55, 0x33, 0x24, 0xf6,
-+    0xba, 0x08, 0x75, 0x5b, 0x59, 0x11, 0x69, 0xb8, 0xb9, 0xe5, 0x2c, 0x77,
-+    0x02, 0xf6, 0x47, 0xee, 0x81, 0xdd, 0xb9, 0x06, },
-+  { 0x9d, },
-+  { 0x9d, 0x7d, },
-+  { 0xfd, 0xc3, 0xda, },
-+  { 0xe8, 0x82, 0xcd, 0x21, },
-+  { 0xc3, 0x1d, 0x42, 0x4c, 0x74, },
-+  { 0xe9, 0xda, 0xf1, 0xa2, 0xe5, 0x7c, },
-+  { 0x52, 0xb8, 0x6f, 0x81, 0x5c, 0x3a, 0x4c, },
-+  { 0x5b, 0x39, 0x26, 0xfc, 0x92, 0x5e, 0xe0, 0x49, },
-+  { 0x59, 0xe4, 0x7c, 0x93, 0x1c, 0xf9, 0x28, 0x93, 0xde, },
-+  { 0xde, 0xdf, 0xb2, 0x43, 0x61, 0x0b, 0x86, 0x16, 0x4c, 0x2e, },
-+  { 0x14, 0x8f, 0x75, 0x51, 0xaf, 0xb9, 0xee, 0x51, 0x5a, 0xae, 0x23, },
-+  { 0x43, 0x5f, 0x50, 0xd5, 0x70, 0xb0, 0x5b, 0x87, 0xf5, 0xd9, 0xb3, 0x6d, },
-+  { 0x66, 0x0a, 0x64, 0x93, 0x79, 0x71, 0x94, 0x40, 0xb7, 0x68, 0x2d, 0xd3,
-+    0x63, },
-+  { 0x15, 0x00, 0xc4, 0x0c, 0x7d, 0x1b, 0x10, 0xa9, 0x73, 0x1b, 0x90, 0x6f,
-+    0xe6, 0xa9, },
-+  { 0x34, 0x75, 0xf3, 0x86, 0x8f, 0x56, 0xcf, 0x2a, 0x0a, 0xf2, 0x62, 0x0a,
-+    0xf6, 0x0e, 0x20, },
-+  { 0xb1, 0xde, 0xc9, 0xf5, 0xdb, 0xf3, 0x2f, 0x4c, 0xd6, 0x41, 0x7d, 0x39,
-+    0x18, 0x3e, 0xc7, 0xc3, },
-+  { 0xc5, 0x89, 0xb2, 0xf8, 0xb8, 0xc0, 0xa3, 0xb9, 0x3b, 0x10, 0x6d, 0x7c,
-+    0x92, 0xfc, 0x7f, 0x34, 0x41, },
-+  { 0xc4, 0xd8, 0xef, 0xba, 0xef, 0xd2, 0xaa, 0xc5, 0x6c, 0x8e, 0x3e, 0xbb,
-+    0x12, 0xfc, 0x0f, 0x72, 0xbf, 0x0f, },
-+  { 0xdd, 0x91, 0xd1, 0x15, 0x9e, 0x7d, 0xf8, 0xc1, 0xb9, 0x14, 0x63, 0x96,
-+    0xb5, 0xcb, 0x83, 0x1d, 0x35, 0x1c, 0xec, },
-+  { 0xa9, 0xf8, 0x52, 0xc9, 0x67, 0x76, 0x2b, 0xad, 0xfb, 0xd8, 0x3a, 0xa6,
-+    0x74, 0x02, 0xae, 0xb8, 0x25, 0x2c, 0x63, 0x49, },
-+  { 0x77, 0x1f, 0x66, 0x70, 0xfd, 0x50, 0x29, 0xaa, 0xeb, 0xdc, 0xee, 0xba,
-+    0x75, 0x98, 0xdc, 0x93, 0x12, 0x3f, 0xdc, 0x7c, 0x38, },
-+  { 0xe2, 0xe1, 0x89, 0x5c, 0x37, 0x38, 0x6a, 0xa3, 0x40, 0xac, 0x3f, 0xb0,
-+    0xca, 0xfc, 0xa7, 0xf3, 0xea, 0xf9, 0x0f, 0x5d, 0x8e, 0x39, },
-+  { 0x0f, 0x67, 0xc8, 0x38, 0x01, 0xb1, 0xb7, 0xb8, 0xa2, 0xe7, 0x0a, 0x6d,
-+    0xd2, 0x63, 0x69, 0x9e, 0xcc, 0xf0, 0xf2, 0xbe, 0x9b, 0x98, 0xdd, },
-+  { 0x13, 0xe1, 0x36, 0x30, 0xfe, 0xc6, 0x01, 0x8a, 0xa1, 0x63, 0x96, 0x59,
-+    0xc2, 0xa9, 0x68, 0x3f, 0x58, 0xd4, 0x19, 0x0c, 0x40, 0xf3, 0xde, 0x02, },
-+  { 0xa3, 0x9e, 0xce, 0xda, 0x42, 0xee, 0x8c, 0x6c, 0x5a, 0x7d, 0xdc, 0x89,
-+    0x02, 0x77, 0xdd, 0xe7, 0x95, 0xbb, 0xff, 0x0d, 0xa4, 0xb5, 0x38, 0x1e,
-+    0xaf, },
-+  { 0x9a, 0xf6, 0xb5, 0x9a, 0x4f, 0xa9, 0x4f, 0x2c, 0x35, 0x3c, 0x24, 0xdc,
-+    0x97, 0x6f, 0xd9, 0xa1, 0x7d, 0x1a, 0x85, 0x0b, 0xf5, 0xda, 0x2e, 0xe7,
-+    0xb1, 0x1d, },
-+  { 0x84, 0x1e, 0x8e, 0x3d, 0x45, 0xa5, 0xf2, 0x27, 0xf3, 0x31, 0xfe, 0xb9,
-+    0xfb, 0xc5, 0x45, 0x99, 0x99, 0xdd, 0x93, 0x43, 0x02, 0xee, 0x58, 0xaf,
-+    0xee, 0x6a, 0xbe, },
-+  { 0x07, 0x2f, 0xc0, 0xa2, 0x04, 0xc4, 0xab, 0x7c, 0x26, 0xbb, 0xa8, 0xd8,
-+    0xe3, 0x1c, 0x75, 0x15, 0x64, 0x5d, 0x02, 0x6a, 0xf0, 0x86, 0xe9, 0xcd,
-+    0x5c, 0xef, 0xa3, 0x25, },
-+  { 0x2f, 0x3b, 0x1f, 0xb5, 0x91, 0x8f, 0x86, 0xe0, 0xdc, 0x31, 0x48, 0xb6,
-+    0xa1, 0x8c, 0xfd, 0x75, 0xbb, 0x7d, 0x3d, 0xc1, 0xf0, 0x10, 0x9a, 0xd8,
-+    0x4b, 0x0e, 0xe3, 0x94, 0x9f, },
-+  { 0x29, 0xbb, 0x8f, 0x6c, 0xd1, 0xf2, 0xb6, 0xaf, 0xe5, 0xe3, 0x2d, 0xdc,
-+    0x6f, 0xa4, 0x53, 0x88, 0xd8, 0xcf, 0x4d, 0x45, 0x42, 0x62, 0xdb, 0xdf,
-+    0xf8, 0x45, 0xc2, 0x13, 0xec, 0x35, },
-+  { 0x06, 0x3c, 0xe3, 0x2c, 0x15, 0xc6, 0x43, 0x03, 0x81, 0xfb, 0x08, 0x76,
-+    0x33, 0xcb, 0x02, 0xc1, 0xba, 0x33, 0xe5, 0xe0, 0xd1, 0x92, 0xa8, 0x46,
-+    0x28, 0x3f, 0x3e, 0x9d, 0x2c, 0x44, 0x54, },
-+  { 0xea, 0xbb, 0x96, 0xf8, 0xd1, 0x8b, 0x04, 0x11, 0x40, 0x78, 0x42, 0x02,
-+    0x19, 0xd1, 0xbc, 0x65, 0x92, 0xd3, 0xc3, 0xd6, 0xd9, 0x19, 0xe7, 0xc3,
-+    0x40, 0x97, 0xbd, 0xd4, 0xed, 0xfa, 0x5e, 0x28, },
-+  { 0x02, },
-+  { 0x52, 0xa8, },
-+  { 0x38, 0x25, 0x0d, },
-+  { 0xe3, 0x04, 0xd4, 0x92, },
-+  { 0x97, 0xdb, 0xf7, 0x81, 0xca, },
-+  { 0x8a, 0x56, 0x9d, 0x62, 0x56, 0xcc, },
-+  { 0xa1, 0x8e, 0x3c, 0x72, 0x8f, 0x63, 0x03, },
-+  { 0xf7, 0xf3, 0x39, 0x09, 0x0a, 0xa1, 0xbb, 0x23, },
-+  { 0x6b, 0x03, 0xc0, 0xe9, 0xd9, 0x83, 0x05, 0x22, 0x01, },
-+  { 0x1b, 0x4b, 0xf5, 0xd6, 0x4f, 0x05, 0x75, 0x91, 0x4c, 0x7f, },
-+  { 0x4c, 0x8c, 0x25, 0x20, 0x21, 0xcb, 0xc2, 0x4b, 0x3a, 0x5b, 0x8d, },
-+  { 0x56, 0xe2, 0x77, 0xa0, 0xb6, 0x9f, 0x81, 0xec, 0x83, 0x75, 0xc4, 0xf9, },
-+  { 0x71, 0x70, 0x0f, 0xad, 0x4d, 0x35, 0x81, 0x9d, 0x88, 0x69, 0xf9, 0xaa,
-+    0xd3, },
-+  { 0x50, 0x6e, 0x86, 0x6e, 0x43, 0xc0, 0xc2, 0x44, 0xc2, 0xe2, 0xa0, 0x1c,
-+    0xb7, 0x9a, },
-+  { 0xe4, 0x7e, 0x72, 0xc6, 0x12, 0x8e, 0x7c, 0xfc, 0xbd, 0xe2, 0x08, 0x31,
-+    0x3d, 0x47, 0x3d, },
-+  { 0x08, 0x97, 0x5b, 0x80, 0xae, 0xc4, 0x1d, 0x50, 0x77, 0xdf, 0x1f, 0xd0,
-+    0x24, 0xf0, 0x17, 0xc0, },
-+  { 0x01, 0xb6, 0x29, 0xf4, 0xaf, 0x78, 0x5f, 0xb6, 0x91, 0xdd, 0x76, 0x76,
-+    0xd2, 0xfd, 0x0c, 0x47, 0x40, },
-+  { 0xa1, 0xd8, 0x09, 0x97, 0x7a, 0xa6, 0xc8, 0x94, 0xf6, 0x91, 0x7b, 0xae,
-+    0x2b, 0x9f, 0x0d, 0x83, 0x48, 0xf7, },
-+  { 0x12, 0xd5, 0x53, 0x7d, 0x9a, 0xb0, 0xbe, 0xd9, 0xed, 0xe9, 0x9e, 0xee,
-+    0x61, 0x5b, 0x42, 0xf2, 0xc0, 0x73, 0xc0, },
-+  { 0xd5, 0x77, 0xd6, 0x5c, 0x6e, 0xa5, 0x69, 0x2b, 0x3b, 0x8c, 0xd6, 0x7d,
-+    0x1d, 0xbe, 0x2c, 0xa1, 0x02, 0x21, 0xcd, 0x29, },
-+  { 0xa4, 0x98, 0x80, 0xca, 0x22, 0xcf, 0x6a, 0xab, 0x5e, 0x40, 0x0d, 0x61,
-+    0x08, 0x21, 0xef, 0xc0, 0x6c, 0x52, 0xb4, 0xb0, 0x53, },
-+  { 0xbf, 0xaf, 0x8f, 0x3b, 0x7a, 0x97, 0x33, 0xe5, 0xca, 0x07, 0x37, 0xfd,
-+    0x15, 0xdf, 0xce, 0x26, 0x2a, 0xb1, 0xa7, 0x0b, 0xb3, 0xac, },
-+  { 0x16, 0x22, 0xe1, 0xbc, 0x99, 0x4e, 0x01, 0xf0, 0xfa, 0xff, 0x8f, 0xa5,
-+    0x0c, 0x61, 0xb0, 0xad, 0xcc, 0xb1, 0xe1, 0x21, 0x46, 0xfa, 0x2e, },
-+  { 0x11, 0x5b, 0x0b, 0x2b, 0xe6, 0x14, 0xc1, 0xd5, 0x4d, 0x71, 0x5e, 0x17,
-+    0xea, 0x23, 0xdd, 0x6c, 0xbd, 0x1d, 0xbe, 0x12, 0x1b, 0xee, 0x4c, 0x1a, },
-+  { 0x40, 0x88, 0x22, 0xf3, 0x20, 0x6c, 0xed, 0xe1, 0x36, 0x34, 0x62, 0x2c,
-+    0x98, 0x83, 0x52, 0xe2, 0x25, 0xee, 0xe9, 0xf5, 0xe1, 0x17, 0xf0, 0x5c,
-+    0xae, },
-+  { 0xc3, 0x76, 0x37, 0xde, 0x95, 0x8c, 0xca, 0x2b, 0x0c, 0x23, 0xe7, 0xb5,
-+    0x38, 0x70, 0x61, 0xcc, 0xff, 0xd3, 0x95, 0x7b, 0xf3, 0xff, 0x1f, 0x9d,
-+    0x59, 0x00, },
-+  { 0x0c, 0x19, 0x52, 0x05, 0x22, 0x53, 0xcb, 0x48, 0xd7, 0x10, 0x0e, 0x7e,
-+    0x14, 0x69, 0xb5, 0xa2, 0x92, 0x43, 0xa3, 0x9e, 0x4b, 0x8f, 0x51, 0x2c,
-+    0x5a, 0x2c, 0x3b, },
-+  { 0xe1, 0x9d, 0x70, 0x70, 0x28, 0xec, 0x86, 0x40, 0x55, 0x33, 0x56, 0xda,
-+    0x88, 0xca, 0xee, 0xc8, 0x6a, 0x20, 0xb1, 0xe5, 0x3d, 0x57, 0xf8, 0x3c,
-+    0x10, 0x07, 0x2a, 0xc4, },
-+  { 0x0b, 0xae, 0xf1, 0xc4, 0x79, 0xee, 0x1b, 0x3d, 0x27, 0x35, 0x8d, 0x14,
-+    0xd6, 0xae, 0x4e, 0x3c, 0xe9, 0x53, 0x50, 0xb5, 0xcc, 0x0c, 0xf7, 0xdf,
-+    0xee, 0xa1, 0x74, 0xd6, 0x71, },
-+  { 0xe6, 0xa4, 0xf4, 0x99, 0x98, 0xb9, 0x80, 0xea, 0x96, 0x7f, 0x4f, 0x33,
-+    0xcf, 0x74, 0x25, 0x6f, 0x17, 0x6c, 0xbf, 0xf5, 0x5c, 0x38, 0xd0, 0xff,
-+    0x96, 0xcb, 0x13, 0xf9, 0xdf, 0xfd, },
-+  { 0xbe, 0x92, 0xeb, 0xba, 0x44, 0x2c, 0x24, 0x74, 0xd4, 0x03, 0x27, 0x3c,
-+    0x5d, 0x5b, 0x03, 0x30, 0x87, 0x63, 0x69, 0xe0, 0xb8, 0x94, 0xf4, 0x44,
-+    0x7e, 0xad, 0xcd, 0x20, 0x12, 0x16, 0x79, },
-+  { 0x30, 0xf1, 0xc4, 0x8e, 0x05, 0x90, 0x2a, 0x97, 0x63, 0x94, 0x46, 0xff,
-+    0xce, 0xd8, 0x67, 0xa7, 0xac, 0x33, 0x8c, 0x95, 0xb7, 0xcd, 0xa3, 0x23,
-+    0x98, 0x9d, 0x76, 0x6c, 0x9d, 0xa8, 0xd6, 0x8a, },
-+  { 0xbe, },
-+  { 0x17, 0x6c, },
-+  { 0x1a, 0x42, 0x4f, },
-+  { 0xba, 0xaf, 0xb7, 0x65, },
-+  { 0xc2, 0x63, 0x43, 0x6a, 0xea, },
-+  { 0xe4, 0x4d, 0xad, 0xf2, 0x0b, 0x02, },
-+  { 0x04, 0xc7, 0xc4, 0x7f, 0xa9, 0x2b, 0xce, },
-+  { 0x66, 0xf6, 0x67, 0xcb, 0x03, 0x53, 0xc8, 0xf1, },
-+  { 0x56, 0xa3, 0x60, 0x78, 0xc9, 0x5f, 0x70, 0x1b, 0x5e, },
-+  { 0x99, 0xff, 0x81, 0x7c, 0x13, 0x3c, 0x29, 0x79, 0x4b, 0x65, },
-+  { 0x51, 0x10, 0x50, 0x93, 0x01, 0x93, 0xb7, 0x01, 0xc9, 0x18, 0xb7, },
-+  { 0x8e, 0x3c, 0x42, 0x1e, 0x5e, 0x7d, 0xc1, 0x50, 0x70, 0x1f, 0x00, 0x98, },
-+  { 0x5f, 0xd9, 0x9b, 0xc8, 0xd7, 0xb2, 0x72, 0x62, 0x1a, 0x1e, 0xba, 0x92,
-+    0xe9, },
-+  { 0x70, 0x2b, 0xba, 0xfe, 0xad, 0x5d, 0x96, 0x3f, 0x27, 0xc2, 0x41, 0x6d,
-+    0xc4, 0xb3, },
-+  { 0xae, 0xe0, 0xd5, 0xd4, 0xc7, 0xae, 0x15, 0x5e, 0xdc, 0xdd, 0x33, 0x60,
-+    0xd7, 0xd3, 0x5e, },
-+  { 0x79, 0x8e, 0xbc, 0x9e, 0x20, 0xb9, 0x19, 0x4b, 0x63, 0x80, 0xf3, 0x16,
-+    0xaf, 0x39, 0xbd, 0x92, },
-+  { 0xc2, 0x0e, 0x85, 0xa0, 0x0b, 0x9a, 0xb0, 0xec, 0xde, 0x38, 0xd3, 0x10,
-+    0xd9, 0xa7, 0x66, 0x27, 0xcf, },
-+  { 0x0e, 0x3b, 0x75, 0x80, 0x67, 0x14, 0x0c, 0x02, 0x90, 0xd6, 0xb3, 0x02,
-+    0x81, 0xf6, 0xa6, 0x87, 0xce, 0x58, },
-+  { 0x79, 0xb5, 0xe9, 0x5d, 0x52, 0x4d, 0xf7, 0x59, 0xf4, 0x2e, 0x27, 0xdd,
-+    0xb3, 0xed, 0x57, 0x5b, 0x82, 0xea, 0x6f, },
-+  { 0xa2, 0x97, 0xf5, 0x80, 0x02, 0x3d, 0xde, 0xa3, 0xf9, 0xf6, 0xab, 0xe3,
-+    0x57, 0x63, 0x7b, 0x9b, 0x10, 0x42, 0x6f, 0xf2, },
-+  { 0x12, 0x7a, 0xfc, 0xb7, 0x67, 0x06, 0x0c, 0x78, 0x1a, 0xfe, 0x88, 0x4f,
-+    0xc6, 0xac, 0x52, 0x96, 0x64, 0x28, 0x97, 0x84, 0x06, },
-+  { 0xc5, 0x04, 0x44, 0x6b, 0xb2, 0xa5, 0xa4, 0x66, 0xe1, 0x76, 0xa2, 0x51,
-+    0xf9, 0x59, 0x69, 0x97, 0x56, 0x0b, 0xbf, 0x50, 0xb3, 0x34, },
-+  { 0x21, 0x32, 0x6b, 0x42, 0xb5, 0xed, 0x71, 0x8d, 0xf7, 0x5a, 0x35, 0xe3,
-+    0x90, 0xe2, 0xee, 0xaa, 0x89, 0xf6, 0xc9, 0x9c, 0x4d, 0x73, 0xf4, },
-+  { 0x4c, 0xa6, 0x09, 0xf4, 0x48, 0xe7, 0x46, 0xbc, 0x49, 0xfc, 0xe5, 0xda,
-+    0xd1, 0x87, 0x13, 0x17, 0x4c, 0x59, 0x71, 0x26, 0x5b, 0x2c, 0x42, 0xb7, },
-+  { 0x13, 0x63, 0xf3, 0x40, 0x02, 0xe5, 0xa3, 0x3a, 0x5e, 0x8e, 0xf8, 0xb6,
-+    0x8a, 0x49, 0x60, 0x76, 0x34, 0x72, 0x94, 0x73, 0xf6, 0xd9, 0x21, 0x6a,
-+    0x26, },
-+  { 0xdf, 0x75, 0x16, 0x10, 0x1b, 0x5e, 0x81, 0xc3, 0xc8, 0xde, 0x34, 0x24,
-+    0xb0, 0x98, 0xeb, 0x1b, 0x8f, 0xa1, 0x9b, 0x05, 0xee, 0xa5, 0xe9, 0x35,
-+    0xf4, 0x1d, },
-+  { 0xcd, 0x21, 0x93, 0x6e, 0x5b, 0xa0, 0x26, 0x2b, 0x21, 0x0e, 0xa0, 0xb9,
-+    0x1c, 0xb5, 0xbb, 0xb8, 0xf8, 0x1e, 0xff, 0x5c, 0xa8, 0xf9, 0x39, 0x46,
-+    0x4e, 0x29, 0x26, },
-+  { 0x73, 0x7f, 0x0e, 0x3b, 0x0b, 0x5c, 0xf9, 0x60, 0xaa, 0x88, 0xa1, 0x09,
-+    0xb1, 0x5d, 0x38, 0x7b, 0x86, 0x8f, 0x13, 0x7a, 0x8d, 0x72, 0x7a, 0x98,
-+    0x1a, 0x5b, 0xff, 0xc9, },
-+  { 0xd3, 0x3c, 0x61, 0x71, 0x44, 0x7e, 0x31, 0x74, 0x98, 0x9d, 0x9a, 0xd2,
-+    0x27, 0xf3, 0x46, 0x43, 0x42, 0x51, 0xd0, 0x5f, 0xe9, 0x1c, 0x5c, 0x69,
-+    0xbf, 0xf6, 0xbe, 0x3c, 0x40, },
-+  { 0x31, 0x99, 0x31, 0x9f, 0xaa, 0x43, 0x2e, 0x77, 0x3e, 0x74, 0x26, 0x31,
-+    0x5e, 0x61, 0xf1, 0x87, 0xe2, 0xeb, 0x9b, 0xcd, 0xd0, 0x3a, 0xee, 0x20,
-+    0x7e, 0x10, 0x0a, 0x0b, 0x7e, 0xfa, },
-+  { 0xa4, 0x27, 0x80, 0x67, 0x81, 0x2a, 0xa7, 0x62, 0xf7, 0x6e, 0xda, 0xd4,
-+    0x5c, 0x39, 0x74, 0xad, 0x7e, 0xbe, 0xad, 0xa5, 0x84, 0x7f, 0xa9, 0x30,
-+    0x5d, 0xdb, 0xe2, 0x05, 0x43, 0xf7, 0x1b, },
-+  { 0x0b, 0x37, 0xd8, 0x02, 0xe1, 0x83, 0xd6, 0x80, 0xf2, 0x35, 0xc2, 0xb0,
-+    0x37, 0xef, 0xef, 0x5e, 0x43, 0x93, 0xf0, 0x49, 0x45, 0x0a, 0xef, 0xb5,
-+    0x76, 0x70, 0x12, 0x44, 0xc4, 0xdb, 0xf5, 0x7a, },
-+  { 0x1f, },
-+  { 0x82, 0x60, },
-+  { 0xcc, 0xe3, 0x08, },
-+  { 0x56, 0x17, 0xe4, 0x59, },
-+  { 0xe2, 0xd7, 0x9e, 0xc4, 0x4c, },
-+  { 0xb2, 0xad, 0xd3, 0x78, 0x58, 0x5a, },
-+  { 0xce, 0x43, 0xb4, 0x02, 0x96, 0xab, 0x3c, },
-+  { 0xe6, 0x05, 0x1a, 0x73, 0x22, 0x32, 0xbb, 0x77, },
-+  { 0x23, 0xe7, 0xda, 0xfe, 0x2c, 0xef, 0x8c, 0x22, 0xec, },
-+  { 0xe9, 0x8e, 0x55, 0x38, 0xd1, 0xd7, 0x35, 0x23, 0x98, 0xc7, },
-+  { 0xb5, 0x81, 0x1a, 0xe5, 0xb5, 0xa5, 0xd9, 0x4d, 0xca, 0x41, 0xe7, },
-+  { 0x41, 0x16, 0x16, 0x95, 0x8d, 0x9e, 0x0c, 0xea, 0x8c, 0x71, 0x9a, 0xc1, },
-+  { 0x7c, 0x33, 0xc0, 0xa4, 0x00, 0x62, 0xea, 0x60, 0x67, 0xe4, 0x20, 0xbc,
-+    0x5b, },
-+  { 0xdb, 0xb1, 0xdc, 0xfd, 0x08, 0xc0, 0xde, 0x82, 0xd1, 0xde, 0x38, 0xc0,
-+    0x90, 0x48, },
-+  { 0x37, 0x18, 0x2e, 0x0d, 0x61, 0xaa, 0x61, 0xd7, 0x86, 0x20, 0x16, 0x60,
-+    0x04, 0xd9, 0xd5, },
-+  { 0xb0, 0xcf, 0x2c, 0x4c, 0x5e, 0x5b, 0x4f, 0x2a, 0x23, 0x25, 0x58, 0x47,
-+    0xe5, 0x31, 0x06, 0x70, },
-+  { 0x91, 0xa0, 0xa3, 0x86, 0x4e, 0xe0, 0x72, 0x38, 0x06, 0x67, 0x59, 0x5c,
-+    0x70, 0x25, 0xdb, 0x33, 0x27, },
-+  { 0x44, 0x58, 0x66, 0xb8, 0x58, 0xc7, 0x13, 0xed, 0x4c, 0xc0, 0xf4, 0x9a,
-+    0x1e, 0x67, 0x75, 0x33, 0xb6, 0xb8, },
-+  { 0x7f, 0x98, 0x4a, 0x8e, 0x50, 0xa2, 0x5c, 0xcd, 0x59, 0xde, 0x72, 0xb3,
-+    0x9d, 0xc3, 0x09, 0x8a, 0xab, 0x56, 0xf1, },
-+  { 0x80, 0x96, 0x49, 0x1a, 0x59, 0xa2, 0xc5, 0xd5, 0xa7, 0x20, 0x8a, 0xb7,
-+    0x27, 0x62, 0x84, 0x43, 0xc6, 0xe1, 0x1b, 0x5d, },
-+  { 0x6b, 0xb7, 0x2b, 0x26, 0x62, 0x14, 0x70, 0x19, 0x3d, 0x4d, 0xac, 0xac,
-+    0x63, 0x58, 0x5e, 0x94, 0xb5, 0xb7, 0xe8, 0xe8, 0xa2, },
-+  { 0x20, 0xa8, 0xc0, 0xfd, 0x63, 0x3d, 0x6e, 0x98, 0xcf, 0x0c, 0x49, 0x98,
-+    0xe4, 0x5a, 0xfe, 0x8c, 0xaa, 0x70, 0x82, 0x1c, 0x7b, 0x74, },
-+  { 0xc8, 0xe8, 0xdd, 0xdf, 0x69, 0x30, 0x01, 0xc2, 0x0f, 0x7e, 0x2f, 0x11,
-+    0xcc, 0x3e, 0x17, 0xa5, 0x69, 0x40, 0x3f, 0x0e, 0x79, 0x7f, 0xcf, },
-+  { 0xdb, 0x61, 0xc0, 0xe2, 0x2e, 0x49, 0x07, 0x31, 0x1d, 0x91, 0x42, 0x8a,
-+    0xfc, 0x5e, 0xd3, 0xf8, 0x56, 0x1f, 0x2b, 0x73, 0xfd, 0x9f, 0xb2, 0x8e, },
-+  { 0x0c, 0x89, 0x55, 0x0c, 0x1f, 0x59, 0x2c, 0x9d, 0x1b, 0x29, 0x1d, 0x41,
-+    0x1d, 0xe6, 0x47, 0x8f, 0x8c, 0x2b, 0xea, 0x8f, 0xf0, 0xff, 0x21, 0x70,
-+    0x88, },
-+  { 0x12, 0x18, 0x95, 0xa6, 0x59, 0xb1, 0x31, 0x24, 0x45, 0x67, 0x55, 0xa4,
-+    0x1a, 0x2d, 0x48, 0x67, 0x1b, 0x43, 0x88, 0x2d, 0x8e, 0xa0, 0x70, 0xb3,
-+    0xc6, 0xbb, },
-+  { 0xe7, 0xb1, 0x1d, 0xb2, 0x76, 0x4d, 0x68, 0x68, 0x68, 0x23, 0x02, 0x55,
-+    0x3a, 0xe2, 0xe5, 0xd5, 0x4b, 0x43, 0xf9, 0x34, 0x77, 0x5c, 0xa1, 0xf5,
-+    0x55, 0xfd, 0x4f, },
-+  { 0x8c, 0x87, 0x5a, 0x08, 0x3a, 0x73, 0xad, 0x61, 0xe1, 0xe7, 0x99, 0x7e,
-+    0xf0, 0x5d, 0xe9, 0x5d, 0x16, 0x43, 0x80, 0x2f, 0xd0, 0x66, 0x34, 0xe2,
-+    0x42, 0x64, 0x3b, 0x1a, },
-+  { 0x39, 0xc1, 0x99, 0xcf, 0x22, 0xbf, 0x16, 0x8f, 0x9f, 0x80, 0x7f, 0x95,
-+    0x0a, 0x05, 0x67, 0x27, 0xe7, 0x15, 0xdf, 0x9d, 0xb2, 0xfe, 0x1c, 0xb5,
-+    0x1d, 0x60, 0x8f, 0x8a, 0x1d, },
-+  { 0x9b, 0x6e, 0x08, 0x09, 0x06, 0x73, 0xab, 0x68, 0x02, 0x62, 0x1a, 0xe4,
-+    0xd4, 0xdf, 0xc7, 0x02, 0x4c, 0x6a, 0x5f, 0xfd, 0x23, 0xac, 0xae, 0x6d,
-+    0x43, 0xa4, 0x7a, 0x50, 0x60, 0x3c, },
-+  { 0x1d, 0xb4, 0xc6, 0xe1, 0xb1, 0x4b, 0xe3, 0xf2, 0xe2, 0x1a, 0x73, 0x1b,
-+    0xa0, 0x92, 0xa7, 0xf5, 0xff, 0x8f, 0x8b, 0x5d, 0xdf, 0xa8, 0x04, 0xb3,
-+    0xb0, 0xf7, 0xcc, 0x12, 0xfa, 0x35, 0x46, },
-+  { 0x49, 0x45, 0x97, 0x11, 0x0f, 0x1c, 0x60, 0x8e, 0xe8, 0x47, 0x30, 0xcf,
-+    0x60, 0xa8, 0x71, 0xc5, 0x1b, 0xe9, 0x39, 0x4d, 0x49, 0xb6, 0x12, 0x1f,
-+    0x24, 0xab, 0x37, 0xff, 0x83, 0xc2, 0xe1, 0x3a, },
-+  { 0x60, },
-+  { 0x24, 0x26, },
-+  { 0x47, 0xeb, 0xc9, },
-+  { 0x4a, 0xd0, 0xbc, 0xf0, },
-+  { 0x8e, 0x2b, 0xc9, 0x85, 0x3c, },
-+  { 0xa2, 0x07, 0x15, 0xb8, 0x12, 0x74, },
-+  { 0x0f, 0xdb, 0x5b, 0x33, 0x69, 0xfe, 0x4b, },
-+  { 0xa2, 0x86, 0x54, 0xf4, 0xfd, 0xb2, 0xd4, 0xe6, },
-+  { 0xbb, 0x84, 0x78, 0x49, 0x27, 0x8e, 0x61, 0xda, 0x60, },
-+  { 0x04, 0xc3, 0xcd, 0xaa, 0x8f, 0xa7, 0x03, 0xc9, 0xf9, 0xb6, },
-+  { 0xf8, 0x27, 0x1d, 0x61, 0xdc, 0x21, 0x42, 0xdd, 0xad, 0x92, 0x40, },
-+  { 0x12, 0x87, 0xdf, 0xc2, 0x41, 0x45, 0x5a, 0x36, 0x48, 0x5b, 0x51, 0x2b, },
-+  { 0xbb, 0x37, 0x5d, 0x1f, 0xf1, 0x68, 0x7a, 0xc4, 0xa5, 0xd2, 0xa4, 0x91,
-+    0x8d, },
-+  { 0x5b, 0x27, 0xd1, 0x04, 0x54, 0x52, 0x9f, 0xa3, 0x47, 0x86, 0x33, 0x33,
-+    0xbf, 0xa0, },
-+  { 0xcf, 0x04, 0xea, 0xf8, 0x03, 0x2a, 0x43, 0xff, 0xa6, 0x68, 0x21, 0x4c,
-+    0xd5, 0x4b, 0xed, },
-+  { 0xaf, 0xb8, 0xbc, 0x63, 0x0f, 0x18, 0x4d, 0xe2, 0x7a, 0xdd, 0x46, 0x44,
-+    0xc8, 0x24, 0x0a, 0xb7, },
-+  { 0x3e, 0xdc, 0x36, 0xe4, 0x89, 0xb1, 0xfa, 0xc6, 0x40, 0x93, 0x2e, 0x75,
-+    0xb2, 0x15, 0xd1, 0xb1, 0x10, },
-+  { 0x6c, 0xd8, 0x20, 0x3b, 0x82, 0x79, 0xf9, 0xc8, 0xbc, 0x9d, 0xe0, 0x35,
-+    0xbe, 0x1b, 0x49, 0x1a, 0xbc, 0x3a, },
-+  { 0x78, 0x65, 0x2c, 0xbe, 0x35, 0x67, 0xdc, 0x78, 0xd4, 0x41, 0xf6, 0xc9,
-+    0xde, 0xde, 0x1f, 0x18, 0x13, 0x31, 0x11, },
-+  { 0x8a, 0x7f, 0xb1, 0x33, 0x8f, 0x0c, 0x3c, 0x0a, 0x06, 0x61, 0xf0, 0x47,
-+    0x29, 0x1b, 0x29, 0xbc, 0x1c, 0x47, 0xef, 0x7a, },
-+  { 0x65, 0x91, 0xf1, 0xe6, 0xb3, 0x96, 0xd3, 0x8c, 0xc2, 0x4a, 0x59, 0x35,
-+    0x72, 0x8e, 0x0b, 0x9a, 0x87, 0xca, 0x34, 0x7b, 0x63, },
-+  { 0x5f, 0x08, 0x87, 0x80, 0x56, 0x25, 0x89, 0x77, 0x61, 0x8c, 0x64, 0xa1,
-+    0x59, 0x6d, 0x59, 0x62, 0xe8, 0x4a, 0xc8, 0x58, 0x99, 0xd1, },
-+  { 0x23, 0x87, 0x1d, 0xed, 0x6f, 0xf2, 0x91, 0x90, 0xe2, 0xfe, 0x43, 0x21,
-+    0xaf, 0x97, 0xc6, 0xbc, 0xd7, 0x15, 0xc7, 0x2d, 0x08, 0x77, 0x91, },
-+  { 0x90, 0x47, 0x9a, 0x9e, 0x3a, 0xdf, 0xf3, 0xc9, 0x4c, 0x1e, 0xa7, 0xd4,
-+    0x6a, 0x32, 0x90, 0xfe, 0xb7, 0xb6, 0x7b, 0xfa, 0x96, 0x61, 0xfb, 0xa4, },
-+  { 0xb1, 0x67, 0x60, 0x45, 0xb0, 0x96, 0xc5, 0x15, 0x9f, 0x4d, 0x26, 0xd7,
-+    0x9d, 0xf1, 0xf5, 0x6d, 0x21, 0x00, 0x94, 0x31, 0x64, 0x94, 0xd3, 0xa7,
-+    0xd3, },
-+  { 0x02, 0x3e, 0xaf, 0xf3, 0x79, 0x73, 0xa5, 0xf5, 0xcc, 0x7a, 0x7f, 0xfb,
-+    0x79, 0x2b, 0x85, 0x8c, 0x88, 0x72, 0x06, 0xbe, 0xfe, 0xaf, 0xc1, 0x16,
-+    0xa6, 0xd6, },
-+  { 0x2a, 0xb0, 0x1a, 0xe5, 0xaa, 0x6e, 0xb3, 0xae, 0x53, 0x85, 0x33, 0x80,
-+    0x75, 0xae, 0x30, 0xe6, 0xb8, 0x72, 0x42, 0xf6, 0x25, 0x4f, 0x38, 0x88,
-+    0x55, 0xd1, 0xa9, },
-+  { 0x90, 0xd8, 0x0c, 0xc0, 0x93, 0x4b, 0x4f, 0x9e, 0x65, 0x6c, 0xa1, 0x54,
-+    0xa6, 0xf6, 0x6e, 0xca, 0xd2, 0xbb, 0x7e, 0x6a, 0x1c, 0xd3, 0xce, 0x46,
-+    0xef, 0xb0, 0x00, 0x8d, },
-+  { 0xed, 0x9c, 0x49, 0xcd, 0xc2, 0xde, 0x38, 0x0e, 0xe9, 0x98, 0x6c, 0xc8,
-+    0x90, 0x9e, 0x3c, 0xd4, 0xd3, 0xeb, 0x88, 0x32, 0xc7, 0x28, 0xe3, 0x94,
-+    0x1c, 0x9f, 0x8b, 0xf3, 0xcb, },
-+  { 0xac, 0xe7, 0x92, 0x16, 0xb4, 0x14, 0xa0, 0xe4, 0x04, 0x79, 0xa2, 0xf4,
-+    0x31, 0xe6, 0x0c, 0x26, 0xdc, 0xbf, 0x2f, 0x69, 0x1b, 0x55, 0x94, 0x67,
-+    0xda, 0x0c, 0xd7, 0x32, 0x1f, 0xef, },
-+  { 0x68, 0x63, 0x85, 0x57, 0x95, 0x9e, 0x42, 0x27, 0x41, 0x43, 0x42, 0x02,
-+    0xa5, 0x78, 0xa7, 0xc6, 0x43, 0xc1, 0x6a, 0xba, 0x70, 0x80, 0xcd, 0x04,
-+    0xb6, 0x78, 0x76, 0x29, 0xf3, 0xe8, 0xa0, },
-+  { 0xe6, 0xac, 0x8d, 0x9d, 0xf0, 0xc0, 0xf7, 0xf7, 0xe3, 0x3e, 0x4e, 0x28,
-+    0x0f, 0x59, 0xb2, 0x67, 0x9e, 0x84, 0x34, 0x42, 0x96, 0x30, 0x2b, 0xca,
-+    0x49, 0xb6, 0xc5, 0x9a, 0x84, 0x59, 0xa7, 0x81, },
-+  { 0x7e, },
-+  { 0x1e, 0x21, },
-+  { 0x26, 0xd3, 0xdd, },
-+  { 0x2c, 0xd4, 0xb3, 0x3d, },
-+  { 0x86, 0x7b, 0x76, 0x3c, 0xf0, },
-+  { 0x12, 0xc3, 0x70, 0x1d, 0x55, 0x18, },
-+  { 0x96, 0xc2, 0xbd, 0x61, 0x55, 0xf4, 0x24, },
-+  { 0x20, 0x51, 0xf7, 0x86, 0x58, 0x8f, 0x07, 0x2a, },
-+  { 0x93, 0x15, 0xa8, 0x1d, 0xda, 0x97, 0xee, 0x0e, 0x6c, },
-+  { 0x39, 0x93, 0xdf, 0xd5, 0x0e, 0xca, 0xdc, 0x7a, 0x92, 0xce, },
-+  { 0x60, 0xd5, 0xfd, 0xf5, 0x1b, 0x26, 0x82, 0x26, 0x73, 0x02, 0xbc, },
-+  { 0x98, 0xf2, 0x34, 0xe1, 0xf5, 0xfb, 0x00, 0xac, 0x10, 0x4a, 0x38, 0x9f, },
-+  { 0xda, 0x3a, 0x92, 0x8a, 0xd0, 0xcd, 0x12, 0xcd, 0x15, 0xbb, 0xab, 0x77,
-+    0x66, },
-+  { 0xa2, 0x92, 0x1a, 0xe5, 0xca, 0x0c, 0x30, 0x75, 0xeb, 0xaf, 0x00, 0x31,
-+    0x55, 0x66, },
-+  { 0x06, 0xea, 0xfd, 0x3e, 0x86, 0x38, 0x62, 0x4e, 0xa9, 0x12, 0xa4, 0x12,
-+    0x43, 0xbf, 0xa1, },
-+  { 0xe4, 0x71, 0x7b, 0x94, 0xdb, 0xa0, 0xd2, 0xff, 0x9b, 0xeb, 0xad, 0x8e,
-+    0x95, 0x8a, 0xc5, 0xed, },
-+  { 0x25, 0x5a, 0x77, 0x71, 0x41, 0x0e, 0x7a, 0xe9, 0xed, 0x0c, 0x10, 0xef,
-+    0xf6, 0x2b, 0x3a, 0xba, 0x60, },
-+  { 0xee, 0xe2, 0xa3, 0x67, 0x64, 0x1d, 0xc6, 0x04, 0xc4, 0xe1, 0x68, 0xd2,
-+    0x6e, 0xd2, 0x91, 0x75, 0x53, 0x07, },
-+  { 0xe0, 0xf6, 0x4d, 0x8f, 0x68, 0xfc, 0x06, 0x7e, 0x18, 0x79, 0x7f, 0x2b,
-+    0x6d, 0xef, 0x46, 0x7f, 0xab, 0xb2, 0xad, },
-+  { 0x3d, 0x35, 0x88, 0x9f, 0x2e, 0xcf, 0x96, 0x45, 0x07, 0x60, 0x71, 0x94,
-+    0x00, 0x8d, 0xbf, 0xf4, 0xef, 0x46, 0x2e, 0x3c, },
-+  { 0x43, 0xcf, 0x98, 0xf7, 0x2d, 0xf4, 0x17, 0xe7, 0x8c, 0x05, 0x2d, 0x9b,
-+    0x24, 0xfb, 0x4d, 0xea, 0x4a, 0xec, 0x01, 0x25, 0x29, },
-+  { 0x8e, 0x73, 0x9a, 0x78, 0x11, 0xfe, 0x48, 0xa0, 0x3b, 0x1a, 0x26, 0xdf,
-+    0x25, 0xe9, 0x59, 0x1c, 0x70, 0x07, 0x9f, 0xdc, 0xa0, 0xa6, },
-+  { 0xe8, 0x47, 0x71, 0xc7, 0x3e, 0xdf, 0xb5, 0x13, 0xb9, 0x85, 0x13, 0xa8,
-+    0x54, 0x47, 0x6e, 0x59, 0x96, 0x09, 0x13, 0x5f, 0x82, 0x16, 0x0b, },
-+  { 0xfb, 0xc0, 0x8c, 0x03, 0x21, 0xb3, 0xc4, 0xb5, 0x43, 0x32, 0x6c, 0xea,
-+    0x7f, 0xa8, 0x43, 0x91, 0xe8, 0x4e, 0x3f, 0xbf, 0x45, 0x58, 0x6a, 0xa3, },
-+  { 0x55, 0xf8, 0xf3, 0x00, 0x76, 0x09, 0xef, 0x69, 0x5d, 0xd2, 0x8a, 0xf2,
-+    0x65, 0xc3, 0xcb, 0x9b, 0x43, 0xfd, 0xb1, 0x7e, 0x7f, 0xa1, 0x94, 0xb0,
-+    0xd7, },
-+  { 0xaa, 0x13, 0xc1, 0x51, 0x40, 0x6d, 0x8d, 0x4c, 0x0a, 0x95, 0x64, 0x7b,
-+    0xd1, 0x96, 0xb6, 0x56, 0xb4, 0x5b, 0xcf, 0xd6, 0xd9, 0x15, 0x97, 0xdd,
-+    0xb6, 0xef, },
-+  { 0xaf, 0xb7, 0x36, 0xb0, 0x04, 0xdb, 0xd7, 0x9c, 0x9a, 0x44, 0xc4, 0xf6,
-+    0x1f, 0x12, 0x21, 0x2d, 0x59, 0x30, 0x54, 0xab, 0x27, 0x61, 0xa3, 0x57,
-+    0xef, 0xf8, 0x53, },
-+  { 0x97, 0x34, 0x45, 0x3e, 0xce, 0x7c, 0x35, 0xa2, 0xda, 0x9f, 0x4b, 0x46,
-+    0x6c, 0x11, 0x67, 0xff, 0x2f, 0x76, 0x58, 0x15, 0x71, 0xfa, 0x44, 0x89,
-+    0x89, 0xfd, 0xf7, 0x99, },
-+  { 0x1f, 0xb1, 0x62, 0xeb, 0x83, 0xc5, 0x9c, 0x89, 0xf9, 0x2c, 0xd2, 0x03,
-+    0x61, 0xbc, 0xbb, 0xa5, 0x74, 0x0e, 0x9b, 0x7e, 0x82, 0x3e, 0x70, 0x0a,
-+    0xa9, 0x8f, 0x2b, 0x59, 0xfb, },
-+  { 0xf8, 0xca, 0x5e, 0x3a, 0x4f, 0x9e, 0x10, 0x69, 0x10, 0xd5, 0x4c, 0xeb,
-+    0x1a, 0x0f, 0x3c, 0x6a, 0x98, 0xf5, 0xb0, 0x97, 0x5b, 0x37, 0x2f, 0x0d,
-+    0xbd, 0x42, 0x4b, 0x69, 0xa1, 0x82, },
-+  { 0x12, 0x8c, 0x6d, 0x52, 0x08, 0xef, 0x74, 0xb2, 0xe6, 0xaa, 0xd3, 0xb0,
-+    0x26, 0xb0, 0xd9, 0x94, 0xb6, 0x11, 0x45, 0x0e, 0x36, 0x71, 0x14, 0x2d,
-+    0x41, 0x8c, 0x21, 0x53, 0x31, 0xe9, 0x68, },
-+  { 0xee, 0xea, 0x0d, 0x89, 0x47, 0x7e, 0x72, 0xd1, 0xd8, 0xce, 0x58, 0x4c,
-+    0x94, 0x1f, 0x0d, 0x51, 0x08, 0xa3, 0xb6, 0x3d, 0xe7, 0x82, 0x46, 0x92,
-+    0xd6, 0x98, 0x6b, 0x07, 0x10, 0x65, 0x52, 0x65, },
-+};
-+
-+static const u8 blake2s_hmac_testvecs[][BLAKE2S_HASH_SIZE] __initconst = {
-+  { 0xce, 0xe1, 0x57, 0x69, 0x82, 0xdc, 0xbf, 0x43, 0xad, 0x56, 0x4c, 0x70,
-+    0xed, 0x68, 0x16, 0x96, 0xcf, 0xa4, 0x73, 0xe8, 0xe8, 0xfc, 0x32, 0x79,
-+    0x08, 0x0a, 0x75, 0x82, 0xda, 0x3f, 0x05, 0x11, },
-+  { 0x77, 0x2f, 0x0c, 0x71, 0x41, 0xf4, 0x4b, 0x2b, 0xb3, 0xc6, 0xb6, 0xf9,
-+    0x60, 0xde, 0xe4, 0x52, 0x38, 0x66, 0xe8, 0xbf, 0x9b, 0x96, 0xc4, 0x9f,
-+    0x60, 0xd9, 0x24, 0x37, 0x99, 0xd6, 0xec, 0x31, },
-+};
-+
-+bool __init blake2s_selftest(void)
-+{
-+	u8 key[BLAKE2S_KEY_SIZE];
-+	u8 buf[ARRAY_SIZE(blake2s_testvecs)];
-+	u8 hash[BLAKE2S_HASH_SIZE];
-+	struct blake2s_state state;
-+	bool success = true;
-+	int i, l;
-+
-+	key[0] = key[1] = 1;
-+	for (i = 2; i < sizeof(key); ++i)
-+		key[i] = key[i - 2] + key[i - 1];
-+
-+	for (i = 0; i < sizeof(buf); ++i)
-+		buf[i] = (u8)i;
-+
-+	for (i = l = 0; i < ARRAY_SIZE(blake2s_testvecs); l = (l + 37) % ++i) {
-+		int outlen = 1 + i % BLAKE2S_HASH_SIZE;
-+		int keylen = (13 * i) % (BLAKE2S_KEY_SIZE + 1);
-+
-+		blake2s(hash, buf, key + BLAKE2S_KEY_SIZE - keylen, outlen, i,
-+			keylen);
-+		if (memcmp(hash, blake2s_testvecs[i], outlen)) {
-+			pr_err("blake2s self-test %d: FAIL\n", i + 1);
-+			success = false;
-+		}
-+
-+		if (!keylen)
-+			blake2s_init(&state, outlen);
-+		else
-+			blake2s_init_key(&state, outlen,
-+					 key + BLAKE2S_KEY_SIZE - keylen,
-+					 keylen);
-+
-+		blake2s_update(&state, buf, l);
-+		blake2s_update(&state, buf + l, i - l);
-+		blake2s_final(&state, hash);
-+		if (memcmp(hash, blake2s_testvecs[i], outlen)) {
-+			pr_err("blake2s init/update/final self-test %d: FAIL\n",
-+			       i + 1);
-+			success = false;
-+		}
-+	}
-+
-+	if (success) {
-+		blake2s256_hmac(hash, buf, key, sizeof(buf), sizeof(key));
-+		success &= !memcmp(hash, blake2s_hmac_testvecs[0], BLAKE2S_HASH_SIZE);
-+
-+		blake2s256_hmac(hash, key, buf, sizeof(key), sizeof(buf));
-+		success &= !memcmp(hash, blake2s_hmac_testvecs[1], BLAKE2S_HASH_SIZE);
-+
-+		if (!success)
-+			pr_err("blake2s256_hmac self-test: FAIL\n");
-+	}
-+
-+	return success;
-+}
---- /dev/null
-+++ b/lib/crypto/blake2s.c
-@@ -0,0 +1,126 @@
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ *
-+ * This is an implementation of the BLAKE2s hash and PRF functions.
-+ *
-+ * Information: https://blake2.net/
-+ *
-+ */
-+
-+#include <crypto/internal/blake2s.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/bug.h>
-+#include <asm/unaligned.h>
-+
-+bool blake2s_selftest(void);
-+
-+void blake2s_update(struct blake2s_state *state, const u8 *in, size_t inlen)
-+{
-+	const size_t fill = BLAKE2S_BLOCK_SIZE - state->buflen;
-+
-+	if (unlikely(!inlen))
-+		return;
-+	if (inlen > fill) {
-+		memcpy(state->buf + state->buflen, in, fill);
-+		if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S))
-+			blake2s_compress_arch(state, state->buf, 1,
-+					      BLAKE2S_BLOCK_SIZE);
-+		else
-+			blake2s_compress_generic(state, state->buf, 1,
-+						 BLAKE2S_BLOCK_SIZE);
-+		state->buflen = 0;
-+		in += fill;
-+		inlen -= fill;
-+	}
-+	if (inlen > BLAKE2S_BLOCK_SIZE) {
-+		const size_t nblocks = DIV_ROUND_UP(inlen, BLAKE2S_BLOCK_SIZE);
-+		/* Hash one less (full) block than strictly possible */
-+		if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S))
-+			blake2s_compress_arch(state, in, nblocks - 1,
-+					      BLAKE2S_BLOCK_SIZE);
-+		else
-+			blake2s_compress_generic(state, in, nblocks - 1,
-+						 BLAKE2S_BLOCK_SIZE);
-+		in += BLAKE2S_BLOCK_SIZE * (nblocks - 1);
-+		inlen -= BLAKE2S_BLOCK_SIZE * (nblocks - 1);
-+	}
-+	memcpy(state->buf + state->buflen, in, inlen);
-+	state->buflen += inlen;
-+}
-+EXPORT_SYMBOL(blake2s_update);
-+
-+void blake2s_final(struct blake2s_state *state, u8 *out)
-+{
-+	WARN_ON(IS_ENABLED(DEBUG) && !out);
-+	blake2s_set_lastblock(state);
-+	memset(state->buf + state->buflen, 0,
-+	       BLAKE2S_BLOCK_SIZE - state->buflen); /* Padding */
-+	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S))
-+		blake2s_compress_arch(state, state->buf, 1, state->buflen);
-+	else
-+		blake2s_compress_generic(state, state->buf, 1, state->buflen);
-+	cpu_to_le32_array(state->h, ARRAY_SIZE(state->h));
-+	memcpy(out, state->h, state->outlen);
-+	memzero_explicit(state, sizeof(*state));
-+}
-+EXPORT_SYMBOL(blake2s_final);
-+
-+void blake2s256_hmac(u8 *out, const u8 *in, const u8 *key, const size_t inlen,
-+		     const size_t keylen)
-+{
-+	struct blake2s_state state;
-+	u8 x_key[BLAKE2S_BLOCK_SIZE] __aligned(__alignof__(u32)) = { 0 };
-+	u8 i_hash[BLAKE2S_HASH_SIZE] __aligned(__alignof__(u32));
-+	int i;
-+
-+	if (keylen > BLAKE2S_BLOCK_SIZE) {
-+		blake2s_init(&state, BLAKE2S_HASH_SIZE);
-+		blake2s_update(&state, key, keylen);
-+		blake2s_final(&state, x_key);
-+	} else
-+		memcpy(x_key, key, keylen);
-+
-+	for (i = 0; i < BLAKE2S_BLOCK_SIZE; ++i)
-+		x_key[i] ^= 0x36;
-+
-+	blake2s_init(&state, BLAKE2S_HASH_SIZE);
-+	blake2s_update(&state, x_key, BLAKE2S_BLOCK_SIZE);
-+	blake2s_update(&state, in, inlen);
-+	blake2s_final(&state, i_hash);
-+
-+	for (i = 0; i < BLAKE2S_BLOCK_SIZE; ++i)
-+		x_key[i] ^= 0x5c ^ 0x36;
-+
-+	blake2s_init(&state, BLAKE2S_HASH_SIZE);
-+	blake2s_update(&state, x_key, BLAKE2S_BLOCK_SIZE);
-+	blake2s_update(&state, i_hash, BLAKE2S_HASH_SIZE);
-+	blake2s_final(&state, i_hash);
-+
-+	memcpy(out, i_hash, BLAKE2S_HASH_SIZE);
-+	memzero_explicit(x_key, BLAKE2S_BLOCK_SIZE);
-+	memzero_explicit(i_hash, BLAKE2S_HASH_SIZE);
-+}
-+EXPORT_SYMBOL(blake2s256_hmac);
-+
-+static int __init mod_init(void)
-+{
-+	if (!IS_ENABLED(CONFIG_CRYPTO_MANAGER_DISABLE_TESTS) &&
-+	    WARN_ON(!blake2s_selftest()))
-+		return -ENODEV;
-+	return 0;
-+}
-+
-+static void __exit mod_exit(void)
-+{
-+}
-+
-+module_init(mod_init);
-+module_exit(mod_exit);
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("BLAKE2s hash function");
-+MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0022-crypto-testmgr-add-test-cases-for-Blake2s.patch b/target/linux/generic/backport-5.4/080-wireguard-0022-crypto-testmgr-add-test-cases-for-Blake2s.patch
deleted file mode 100644
index 9adc75eb98..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0022-crypto-testmgr-add-test-cases-for-Blake2s.patch
+++ /dev/null
@@ -1,322 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:29 +0100
-Subject: [PATCH] crypto: testmgr - add test cases for Blake2s
-
-commit 17e1df67023a5c9ccaeb5de8bf5b88f63127ecf7 upstream.
-
-As suggested by Eric for the Blake2b implementation contributed by
-David, introduce a set of test vectors for Blake2s covering different
-digest and key sizes.
-
-          blake2s-128  blake2s-160  blake2s-224  blake2s-256
-         ---------------------------------------------------
-len=0   | klen=0       klen=1       klen=16      klen=32
-len=1   | klen=16      klen=32      klen=0       klen=1
-len=7   | klen=32      klen=0       klen=1       klen=16
-len=15  | klen=1       klen=16      klen=32      klen=0
-len=64  | klen=0       klen=1       klen=16      klen=32
-len=247 | klen=16      klen=32      klen=0       klen=1
-len=256 | klen=32      klen=0       klen=1       klen=16
-
-Cc: David Sterba <dsterba@suse.com>
-Cc: Eric Biggers <ebiggers@google.com>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- crypto/testmgr.c |  24 +++++
- crypto/testmgr.h | 251 +++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 275 insertions(+)
-
---- a/crypto/testmgr.c
-+++ b/crypto/testmgr.c
-@@ -4035,6 +4035,30 @@ static const struct alg_test_desc alg_te
- 		.test = alg_test_null,
- 		.fips_allowed = 1,
- 	}, {
-+		.alg = "blake2s-128",
-+		.test = alg_test_hash,
-+		.suite = {
-+			.hash = __VECS(blakes2s_128_tv_template)
-+		}
-+	}, {
-+		.alg = "blake2s-160",
-+		.test = alg_test_hash,
-+		.suite = {
-+			.hash = __VECS(blakes2s_160_tv_template)
-+		}
-+	}, {
-+		.alg = "blake2s-224",
-+		.test = alg_test_hash,
-+		.suite = {
-+			.hash = __VECS(blakes2s_224_tv_template)
-+		}
-+	}, {
-+		.alg = "blake2s-256",
-+		.test = alg_test_hash,
-+		.suite = {
-+			.hash = __VECS(blakes2s_256_tv_template)
-+		}
-+	}, {
- 		.alg = "cbc(aes)",
- 		.test = alg_test_skcipher,
- 		.fips_allowed = 1,
---- a/crypto/testmgr.h
-+++ b/crypto/testmgr.h
-@@ -31567,4 +31567,255 @@ static const struct aead_testvec essiv_h
- 	},
- };
- 
-+static const char blake2_ordered_sequence[] =
-+	"\x00\x01\x02\x03\x04\x05\x06\x07"
-+	"\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f"
-+	"\x10\x11\x12\x13\x14\x15\x16\x17"
-+	"\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f"
-+	"\x20\x21\x22\x23\x24\x25\x26\x27"
-+	"\x28\x29\x2a\x2b\x2c\x2d\x2e\x2f"
-+	"\x30\x31\x32\x33\x34\x35\x36\x37"
-+	"\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f"
-+	"\x40\x41\x42\x43\x44\x45\x46\x47"
-+	"\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f"
-+	"\x50\x51\x52\x53\x54\x55\x56\x57"
-+	"\x58\x59\x5a\x5b\x5c\x5d\x5e\x5f"
-+	"\x60\x61\x62\x63\x64\x65\x66\x67"
-+	"\x68\x69\x6a\x6b\x6c\x6d\x6e\x6f"
-+	"\x70\x71\x72\x73\x74\x75\x76\x77"
-+	"\x78\x79\x7a\x7b\x7c\x7d\x7e\x7f"
-+	"\x80\x81\x82\x83\x84\x85\x86\x87"
-+	"\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f"
-+	"\x90\x91\x92\x93\x94\x95\x96\x97"
-+	"\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f"
-+	"\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7"
-+	"\xa8\xa9\xaa\xab\xac\xad\xae\xaf"
-+	"\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7"
-+	"\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf"
-+	"\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7"
-+	"\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf"
-+	"\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7"
-+	"\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf"
-+	"\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7"
-+	"\xe8\xe9\xea\xeb\xec\xed\xee\xef"
-+	"\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
-+	"\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff";
-+
-+static const struct hash_testvec blakes2s_128_tv_template[] = {{
-+	.digest = (u8[]){ 0x64, 0x55, 0x0d, 0x6f, 0xfe, 0x2c, 0x0a, 0x01,
-+			  0xa1, 0x4a, 0xba, 0x1e, 0xad, 0xe0, 0x20, 0x0c, },
-+}, {
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 64,
-+	.digest = (u8[]){ 0xdc, 0x66, 0xca, 0x8f, 0x03, 0x86, 0x58, 0x01,
-+			  0xb0, 0xff, 0xe0, 0x6e, 0xd8, 0xa1, 0xa9, 0x0e, },
-+}, {
-+	.ksize = 16,
-+	.key = blake2_ordered_sequence,
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 1,
-+	.digest = (u8[]){ 0x88, 0x1e, 0x42, 0xe7, 0xbb, 0x35, 0x80, 0x82,
-+			  0x63, 0x7c, 0x0a, 0x0f, 0xd7, 0xec, 0x6c, 0x2f, },
-+}, {
-+	.ksize = 32,
-+	.key = blake2_ordered_sequence,
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 7,
-+	.digest = (u8[]){ 0xcf, 0x9e, 0x07, 0x2a, 0xd5, 0x22, 0xf2, 0xcd,
-+			  0xa2, 0xd8, 0x25, 0x21, 0x80, 0x86, 0x73, 0x1c, },
-+}, {
-+	.ksize = 1,
-+	.key = "B",
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 15,
-+	.digest = (u8[]){ 0xf6, 0x33, 0x5a, 0x2c, 0x22, 0xa0, 0x64, 0xb2,
-+			  0xb6, 0x3f, 0xeb, 0xbc, 0xd1, 0xc3, 0xe5, 0xb2, },
-+}, {
-+	.ksize = 16,
-+	.key = blake2_ordered_sequence,
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 247,
-+	.digest = (u8[]){ 0x72, 0x66, 0x49, 0x60, 0xf9, 0x4a, 0xea, 0xbe,
-+			  0x1f, 0xf4, 0x60, 0xce, 0xb7, 0x81, 0xcb, 0x09, },
-+}, {
-+	.ksize = 32,
-+	.key = blake2_ordered_sequence,
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 256,
-+	.digest = (u8[]){ 0xd5, 0xa4, 0x0e, 0xc3, 0x16, 0xc7, 0x51, 0xa6,
-+			  0x3c, 0xd0, 0xd9, 0x11, 0x57, 0xfa, 0x1e, 0xbb, },
-+}};
-+
-+static const struct hash_testvec blakes2s_160_tv_template[] = {{
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 7,
-+	.digest = (u8[]){ 0xb4, 0xf2, 0x03, 0x49, 0x37, 0xed, 0xb1, 0x3e,
-+			  0x5b, 0x2a, 0xca, 0x64, 0x82, 0x74, 0xf6, 0x62,
-+			  0xe3, 0xf2, 0x84, 0xff, },
-+}, {
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 256,
-+	.digest = (u8[]){ 0xaa, 0x56, 0x9b, 0xdc, 0x98, 0x17, 0x75, 0xf2,
-+			  0xb3, 0x68, 0x83, 0xb7, 0x9b, 0x8d, 0x48, 0xb1,
-+			  0x9b, 0x2d, 0x35, 0x05, },
-+}, {
-+	.ksize = 1,
-+	.key = "B",
-+	.digest = (u8[]){ 0x50, 0x16, 0xe7, 0x0c, 0x01, 0xd0, 0xd3, 0xc3,
-+			  0xf4, 0x3e, 0xb1, 0x6e, 0x97, 0xa9, 0x4e, 0xd1,
-+			  0x79, 0x65, 0x32, 0x93, },
-+}, {
-+	.ksize = 32,
-+	.key = blake2_ordered_sequence,
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 1,
-+	.digest = (u8[]){ 0x1c, 0x2b, 0xcd, 0x9a, 0x68, 0xca, 0x8c, 0x71,
-+			  0x90, 0x29, 0x6c, 0x54, 0xfa, 0x56, 0x4a, 0xef,
-+			  0xa2, 0x3a, 0x56, 0x9c, },
-+}, {
-+	.ksize = 16,
-+	.key = blake2_ordered_sequence,
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 15,
-+	.digest = (u8[]){ 0x36, 0xc3, 0x5f, 0x9a, 0xdc, 0x7e, 0xbf, 0x19,
-+			  0x68, 0xaa, 0xca, 0xd8, 0x81, 0xbf, 0x09, 0x34,
-+			  0x83, 0x39, 0x0f, 0x30, },
-+}, {
-+	.ksize = 1,
-+	.key = "B",
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 64,
-+	.digest = (u8[]){ 0x86, 0x80, 0x78, 0xa4, 0x14, 0xec, 0x03, 0xe5,
-+			  0xb6, 0x9a, 0x52, 0x0e, 0x42, 0xee, 0x39, 0x9d,
-+			  0xac, 0xa6, 0x81, 0x63, },
-+}, {
-+	.ksize = 32,
-+	.key = blake2_ordered_sequence,
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 247,
-+	.digest = (u8[]){ 0x2d, 0xd8, 0xd2, 0x53, 0x66, 0xfa, 0xa9, 0x01,
-+			  0x1c, 0x9c, 0xaf, 0xa3, 0xe2, 0x9d, 0x9b, 0x10,
-+			  0x0a, 0xf6, 0x73, 0xe8, },
-+}};
-+
-+static const struct hash_testvec blakes2s_224_tv_template[] = {{
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 1,
-+	.digest = (u8[]){ 0x61, 0xb9, 0x4e, 0xc9, 0x46, 0x22, 0xa3, 0x91,
-+			  0xd2, 0xae, 0x42, 0xe6, 0x45, 0x6c, 0x90, 0x12,
-+			  0xd5, 0x80, 0x07, 0x97, 0xb8, 0x86, 0x5a, 0xfc,
-+			  0x48, 0x21, 0x97, 0xbb, },
-+}, {
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 247,
-+	.digest = (u8[]){ 0x9e, 0xda, 0xc7, 0x20, 0x2c, 0xd8, 0x48, 0x2e,
-+			  0x31, 0x94, 0xab, 0x46, 0x6d, 0x94, 0xd8, 0xb4,
-+			  0x69, 0xcd, 0xae, 0x19, 0x6d, 0x9e, 0x41, 0xcc,
-+			  0x2b, 0xa4, 0xd5, 0xf6, },
-+}, {
-+	.ksize = 16,
-+	.key = blake2_ordered_sequence,
-+	.digest = (u8[]){ 0x32, 0xc0, 0xac, 0xf4, 0x3b, 0xd3, 0x07, 0x9f,
-+			  0xbe, 0xfb, 0xfa, 0x4d, 0x6b, 0x4e, 0x56, 0xb3,
-+			  0xaa, 0xd3, 0x27, 0xf6, 0x14, 0xbf, 0xb9, 0x32,
-+			  0xa7, 0x19, 0xfc, 0xb8, },
-+}, {
-+	.ksize = 1,
-+	.key = "B",
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 7,
-+	.digest = (u8[]){ 0x73, 0xad, 0x5e, 0x6d, 0xb9, 0x02, 0x8e, 0x76,
-+			  0xf2, 0x66, 0x42, 0x4b, 0x4c, 0xfa, 0x1f, 0xe6,
-+			  0x2e, 0x56, 0x40, 0xe5, 0xa2, 0xb0, 0x3c, 0xe8,
-+			  0x7b, 0x45, 0xfe, 0x05, },
-+}, {
-+	.ksize = 32,
-+	.key = blake2_ordered_sequence,
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 15,
-+	.digest = (u8[]){ 0x16, 0x60, 0xfb, 0x92, 0x54, 0xb3, 0x6e, 0x36,
-+			  0x81, 0xf4, 0x16, 0x41, 0xc3, 0x3d, 0xd3, 0x43,
-+			  0x84, 0xed, 0x10, 0x6f, 0x65, 0x80, 0x7a, 0x3e,
-+			  0x25, 0xab, 0xc5, 0x02, },
-+}, {
-+	.ksize = 16,
-+	.key = blake2_ordered_sequence,
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 64,
-+	.digest = (u8[]){ 0xca, 0xaa, 0x39, 0x67, 0x9c, 0xf7, 0x6b, 0xc7,
-+			  0xb6, 0x82, 0xca, 0x0e, 0x65, 0x36, 0x5b, 0x7c,
-+			  0x24, 0x00, 0xfa, 0x5f, 0xda, 0x06, 0x91, 0x93,
-+			  0x6a, 0x31, 0x83, 0xb5, },
-+}, {
-+	.ksize = 1,
-+	.key = "B",
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 256,
-+	.digest = (u8[]){ 0x90, 0x02, 0x26, 0xb5, 0x06, 0x9c, 0x36, 0x86,
-+			  0x94, 0x91, 0x90, 0x1e, 0x7d, 0x2a, 0x71, 0xb2,
-+			  0x48, 0xb5, 0xe8, 0x16, 0xfd, 0x64, 0x33, 0x45,
-+			  0xb3, 0xd7, 0xec, 0xcc, },
-+}};
-+
-+static const struct hash_testvec blakes2s_256_tv_template[] = {{
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 15,
-+	.digest = (u8[]){ 0xd9, 0x7c, 0x82, 0x8d, 0x81, 0x82, 0xa7, 0x21,
-+			  0x80, 0xa0, 0x6a, 0x78, 0x26, 0x83, 0x30, 0x67,
-+			  0x3f, 0x7c, 0x4e, 0x06, 0x35, 0x94, 0x7c, 0x04,
-+			  0xc0, 0x23, 0x23, 0xfd, 0x45, 0xc0, 0xa5, 0x2d, },
-+}, {
-+	.ksize = 32,
-+	.key = blake2_ordered_sequence,
-+	.digest = (u8[]){ 0x48, 0xa8, 0x99, 0x7d, 0xa4, 0x07, 0x87, 0x6b,
-+			  0x3d, 0x79, 0xc0, 0xd9, 0x23, 0x25, 0xad, 0x3b,
-+			  0x89, 0xcb, 0xb7, 0x54, 0xd8, 0x6a, 0xb7, 0x1a,
-+			  0xee, 0x04, 0x7a, 0xd3, 0x45, 0xfd, 0x2c, 0x49, },
-+}, {
-+	.ksize = 1,
-+	.key = "B",
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 1,
-+	.digest = (u8[]){ 0x22, 0x27, 0xae, 0xaa, 0x6e, 0x81, 0x56, 0x03,
-+			  0xa7, 0xe3, 0xa1, 0x18, 0xa5, 0x9a, 0x2c, 0x18,
-+			  0xf4, 0x63, 0xbc, 0x16, 0x70, 0xf1, 0xe7, 0x4b,
-+			  0x00, 0x6d, 0x66, 0x16, 0xae, 0x9e, 0x74, 0x4e, },
-+}, {
-+	.ksize = 16,
-+	.key = blake2_ordered_sequence,
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 7,
-+	.digest = (u8[]){ 0x58, 0x5d, 0xa8, 0x60, 0x1c, 0xa4, 0xd8, 0x03,
-+			  0x86, 0x86, 0x84, 0x64, 0xd7, 0xa0, 0x8e, 0x15,
-+			  0x2f, 0x05, 0xa2, 0x1b, 0xbc, 0xef, 0x7a, 0x34,
-+			  0xb3, 0xc5, 0xbc, 0x4b, 0xf0, 0x32, 0xeb, 0x12, },
-+}, {
-+	.ksize = 32,
-+	.key = blake2_ordered_sequence,
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 64,
-+	.digest = (u8[]){ 0x89, 0x75, 0xb0, 0x57, 0x7f, 0xd3, 0x55, 0x66,
-+			  0xd7, 0x50, 0xb3, 0x62, 0xb0, 0x89, 0x7a, 0x26,
-+			  0xc3, 0x99, 0x13, 0x6d, 0xf0, 0x7b, 0xab, 0xab,
-+			  0xbd, 0xe6, 0x20, 0x3f, 0xf2, 0x95, 0x4e, 0xd4, },
-+}, {
-+	.ksize = 1,
-+	.key = "B",
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 247,
-+	.digest = (u8[]){ 0x2e, 0x74, 0x1c, 0x1d, 0x03, 0xf4, 0x9d, 0x84,
-+			  0x6f, 0xfc, 0x86, 0x32, 0x92, 0x49, 0x7e, 0x66,
-+			  0xd7, 0xc3, 0x10, 0x88, 0xfe, 0x28, 0xb3, 0xe0,
-+			  0xbf, 0x50, 0x75, 0xad, 0x8e, 0xa4, 0xe6, 0xb2, },
-+}, {
-+	.ksize = 16,
-+	.key = blake2_ordered_sequence,
-+	.plaintext = blake2_ordered_sequence,
-+	.psize = 256,
-+	.digest = (u8[]){ 0xb9, 0xd2, 0x81, 0x0e, 0x3a, 0xb1, 0x62, 0x9b,
-+			  0xad, 0x44, 0x05, 0xf4, 0x92, 0x2e, 0x99, 0xc1,
-+			  0x4a, 0x47, 0xbb, 0x5b, 0x6f, 0xb2, 0x96, 0xed,
-+			  0xd5, 0x06, 0xb5, 0x3a, 0x7c, 0x7a, 0x65, 0x1d, },
-+}};
-+
- #endif	/* _CRYPTO_TESTMGR_H */
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0023-crypto-blake2s-implement-generic-shash-driver.patch b/target/linux/generic/backport-5.4/080-wireguard-0023-crypto-blake2s-implement-generic-shash-driver.patch
deleted file mode 100644
index e25edf5dda..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0023-crypto-blake2s-implement-generic-shash-driver.patch
+++ /dev/null
@@ -1,245 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:30 +0100
-Subject: [PATCH] crypto: blake2s - implement generic shash driver
-
-commit 7f9b0880925f1f9d7d59504ea0892d2ae9cfc233 upstream.
-
-Wire up our newly added Blake2s implementation via the shash API.
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- crypto/Kconfig                    |  18 ++++
- crypto/Makefile                   |   1 +
- crypto/blake2s_generic.c          | 171 ++++++++++++++++++++++++++++++
- include/crypto/internal/blake2s.h |   5 +
- 4 files changed, 195 insertions(+)
- create mode 100644 crypto/blake2s_generic.c
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -639,6 +639,24 @@ config CRYPTO_XXHASH
- 	  xxHash non-cryptographic hash algorithm. Extremely fast, working at
- 	  speeds close to RAM limits.
- 
-+config CRYPTO_BLAKE2S
-+	tristate "BLAKE2s digest algorithm"
-+	select CRYPTO_LIB_BLAKE2S_GENERIC
-+	select CRYPTO_HASH
-+	help
-+	  Implementation of cryptographic hash function BLAKE2s
-+	  optimized for 8-32bit platforms and can produce digests of any size
-+	  between 1 to 32.  The keyed hash is also implemented.
-+
-+	  This module provides the following algorithms:
-+
-+	  - blake2s-128
-+	  - blake2s-160
-+	  - blake2s-224
-+	  - blake2s-256
-+
-+	  See https://blake2.net for further information.
-+
- config CRYPTO_CRCT10DIF
- 	tristate "CRCT10DIF algorithm"
- 	select CRYPTO_HASH
---- a/crypto/Makefile
-+++ b/crypto/Makefile
-@@ -74,6 +74,7 @@ obj-$(CONFIG_CRYPTO_STREEBOG) += streebo
- obj-$(CONFIG_CRYPTO_WP512) += wp512.o
- CFLAGS_wp512.o := $(call cc-option,-fno-schedule-insns)  # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149
- obj-$(CONFIG_CRYPTO_TGR192) += tgr192.o
-+obj-$(CONFIG_CRYPTO_BLAKE2S) += blake2s_generic.o
- obj-$(CONFIG_CRYPTO_GF128MUL) += gf128mul.o
- obj-$(CONFIG_CRYPTO_ECB) += ecb.o
- obj-$(CONFIG_CRYPTO_CBC) += cbc.o
---- /dev/null
-+++ b/crypto/blake2s_generic.c
-@@ -0,0 +1,171 @@
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include <crypto/internal/blake2s.h>
-+#include <crypto/internal/simd.h>
-+#include <crypto/internal/hash.h>
-+
-+#include <linux/types.h>
-+#include <linux/jump_label.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+
-+static int crypto_blake2s_setkey(struct crypto_shash *tfm, const u8 *key,
-+				 unsigned int keylen)
-+{
-+	struct blake2s_tfm_ctx *tctx = crypto_shash_ctx(tfm);
-+
-+	if (keylen == 0 || keylen > BLAKE2S_KEY_SIZE) {
-+		crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
-+		return -EINVAL;
-+	}
-+
-+	memcpy(tctx->key, key, keylen);
-+	tctx->keylen = keylen;
-+
-+	return 0;
-+}
-+
-+static int crypto_blake2s_init(struct shash_desc *desc)
-+{
-+	struct blake2s_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
-+	struct blake2s_state *state = shash_desc_ctx(desc);
-+	const int outlen = crypto_shash_digestsize(desc->tfm);
-+
-+	if (tctx->keylen)
-+		blake2s_init_key(state, outlen, tctx->key, tctx->keylen);
-+	else
-+		blake2s_init(state, outlen);
-+
-+	return 0;
-+}
-+
-+static int crypto_blake2s_update(struct shash_desc *desc, const u8 *in,
-+				 unsigned int inlen)
-+{
-+	struct blake2s_state *state = shash_desc_ctx(desc);
-+	const size_t fill = BLAKE2S_BLOCK_SIZE - state->buflen;
-+
-+	if (unlikely(!inlen))
-+		return 0;
-+	if (inlen > fill) {
-+		memcpy(state->buf + state->buflen, in, fill);
-+		blake2s_compress_generic(state, state->buf, 1, BLAKE2S_BLOCK_SIZE);
-+		state->buflen = 0;
-+		in += fill;
-+		inlen -= fill;
-+	}
-+	if (inlen > BLAKE2S_BLOCK_SIZE) {
-+		const size_t nblocks = DIV_ROUND_UP(inlen, BLAKE2S_BLOCK_SIZE);
-+		/* Hash one less (full) block than strictly possible */
-+		blake2s_compress_generic(state, in, nblocks - 1, BLAKE2S_BLOCK_SIZE);
-+		in += BLAKE2S_BLOCK_SIZE * (nblocks - 1);
-+		inlen -= BLAKE2S_BLOCK_SIZE * (nblocks - 1);
-+	}
-+	memcpy(state->buf + state->buflen, in, inlen);
-+	state->buflen += inlen;
-+
-+	return 0;
-+}
-+
-+static int crypto_blake2s_final(struct shash_desc *desc, u8 *out)
-+{
-+	struct blake2s_state *state = shash_desc_ctx(desc);
-+
-+	blake2s_set_lastblock(state);
-+	memset(state->buf + state->buflen, 0,
-+	       BLAKE2S_BLOCK_SIZE - state->buflen); /* Padding */
-+	blake2s_compress_generic(state, state->buf, 1, state->buflen);
-+	cpu_to_le32_array(state->h, ARRAY_SIZE(state->h));
-+	memcpy(out, state->h, state->outlen);
-+	memzero_explicit(state, sizeof(*state));
-+
-+	return 0;
-+}
-+
-+static struct shash_alg blake2s_algs[] = {{
-+	.base.cra_name		= "blake2s-128",
-+	.base.cra_driver_name	= "blake2s-128-generic",
-+	.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,
-+	.base.cra_ctxsize	= sizeof(struct blake2s_tfm_ctx),
-+	.base.cra_priority	= 200,
-+	.base.cra_blocksize     = BLAKE2S_BLOCK_SIZE,
-+	.base.cra_module	= THIS_MODULE,
-+
-+	.digestsize		= BLAKE2S_128_HASH_SIZE,
-+	.setkey			= crypto_blake2s_setkey,
-+	.init			= crypto_blake2s_init,
-+	.update			= crypto_blake2s_update,
-+	.final			= crypto_blake2s_final,
-+	.descsize		= sizeof(struct blake2s_state),
-+}, {
-+	.base.cra_name		= "blake2s-160",
-+	.base.cra_driver_name	= "blake2s-160-generic",
-+	.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,
-+	.base.cra_ctxsize	= sizeof(struct blake2s_tfm_ctx),
-+	.base.cra_priority	= 200,
-+	.base.cra_blocksize     = BLAKE2S_BLOCK_SIZE,
-+	.base.cra_module	= THIS_MODULE,
-+
-+	.digestsize		= BLAKE2S_160_HASH_SIZE,
-+	.setkey			= crypto_blake2s_setkey,
-+	.init			= crypto_blake2s_init,
-+	.update			= crypto_blake2s_update,
-+	.final			= crypto_blake2s_final,
-+	.descsize		= sizeof(struct blake2s_state),
-+}, {
-+	.base.cra_name		= "blake2s-224",
-+	.base.cra_driver_name	= "blake2s-224-generic",
-+	.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,
-+	.base.cra_ctxsize	= sizeof(struct blake2s_tfm_ctx),
-+	.base.cra_priority	= 200,
-+	.base.cra_blocksize     = BLAKE2S_BLOCK_SIZE,
-+	.base.cra_module	= THIS_MODULE,
-+
-+	.digestsize		= BLAKE2S_224_HASH_SIZE,
-+	.setkey			= crypto_blake2s_setkey,
-+	.init			= crypto_blake2s_init,
-+	.update			= crypto_blake2s_update,
-+	.final			= crypto_blake2s_final,
-+	.descsize		= sizeof(struct blake2s_state),
-+}, {
-+	.base.cra_name		= "blake2s-256",
-+	.base.cra_driver_name	= "blake2s-256-generic",
-+	.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,
-+	.base.cra_ctxsize	= sizeof(struct blake2s_tfm_ctx),
-+	.base.cra_priority	= 200,
-+	.base.cra_blocksize     = BLAKE2S_BLOCK_SIZE,
-+	.base.cra_module	= THIS_MODULE,
-+
-+	.digestsize		= BLAKE2S_256_HASH_SIZE,
-+	.setkey			= crypto_blake2s_setkey,
-+	.init			= crypto_blake2s_init,
-+	.update			= crypto_blake2s_update,
-+	.final			= crypto_blake2s_final,
-+	.descsize		= sizeof(struct blake2s_state),
-+}};
-+
-+static int __init blake2s_mod_init(void)
-+{
-+	return crypto_register_shashes(blake2s_algs, ARRAY_SIZE(blake2s_algs));
-+}
-+
-+static void __exit blake2s_mod_exit(void)
-+{
-+	crypto_unregister_shashes(blake2s_algs, ARRAY_SIZE(blake2s_algs));
-+}
-+
-+subsys_initcall(blake2s_mod_init);
-+module_exit(blake2s_mod_exit);
-+
-+MODULE_ALIAS_CRYPTO("blake2s-128");
-+MODULE_ALIAS_CRYPTO("blake2s-128-generic");
-+MODULE_ALIAS_CRYPTO("blake2s-160");
-+MODULE_ALIAS_CRYPTO("blake2s-160-generic");
-+MODULE_ALIAS_CRYPTO("blake2s-224");
-+MODULE_ALIAS_CRYPTO("blake2s-224-generic");
-+MODULE_ALIAS_CRYPTO("blake2s-256");
-+MODULE_ALIAS_CRYPTO("blake2s-256-generic");
-+MODULE_LICENSE("GPL v2");
---- a/include/crypto/internal/blake2s.h
-+++ b/include/crypto/internal/blake2s.h
-@@ -5,6 +5,11 @@
- 
- #include <crypto/blake2s.h>
- 
-+struct blake2s_tfm_ctx {
-+	u8 key[BLAKE2S_KEY_SIZE];
-+	unsigned int keylen;
-+};
-+
- void blake2s_compress_generic(struct blake2s_state *state,const u8 *block,
- 			      size_t nblocks, const u32 inc);
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0024-crypto-blake2s-x86_64-SIMD-implementation.patch b/target/linux/generic/backport-5.4/080-wireguard-0024-crypto-blake2s-x86_64-SIMD-implementation.patch
deleted file mode 100644
index 04405581d2..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0024-crypto-blake2s-x86_64-SIMD-implementation.patch
+++ /dev/null
@@ -1,557 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 8 Nov 2019 13:22:31 +0100
-Subject: [PATCH] crypto: blake2s - x86_64 SIMD implementation
-
-commit ed0356eda153f6a95649e11feb7b07083caf9e20 upstream.
-
-These implementations from Samuel Neves support AVX and AVX-512VL.
-Originally this used AVX-512F, but Skylake thermal throttling made
-AVX-512VL more attractive and possible to do with negligable difference.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
-Co-developed-by: Samuel Neves <sneves@dei.uc.pt>
-[ardb: move to arch/x86/crypto, wire into lib/crypto framework]
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/Makefile       |   2 +
- arch/x86/crypto/blake2s-core.S | 258 +++++++++++++++++++++++++++++++++
- arch/x86/crypto/blake2s-glue.c | 233 +++++++++++++++++++++++++++++
- crypto/Kconfig                 |   6 +
- 4 files changed, 499 insertions(+)
- create mode 100644 arch/x86/crypto/blake2s-core.S
- create mode 100644 arch/x86/crypto/blake2s-glue.c
-
---- a/arch/x86/crypto/Makefile
-+++ b/arch/x86/crypto/Makefile
-@@ -48,6 +48,7 @@ ifeq ($(avx_supported),yes)
- 	obj-$(CONFIG_CRYPTO_CAST6_AVX_X86_64) += cast6-avx-x86_64.o
- 	obj-$(CONFIG_CRYPTO_TWOFISH_AVX_X86_64) += twofish-avx-x86_64.o
- 	obj-$(CONFIG_CRYPTO_SERPENT_AVX_X86_64) += serpent-avx-x86_64.o
-+	obj-$(CONFIG_CRYPTO_BLAKE2S_X86) += blake2s-x86_64.o
- endif
- 
- # These modules require assembler to support AVX2.
-@@ -70,6 +71,7 @@ serpent-sse2-x86_64-y := serpent-sse2-x8
- aegis128-aesni-y := aegis128-aesni-asm.o aegis128-aesni-glue.o
- 
- nhpoly1305-sse2-y := nh-sse2-x86_64.o nhpoly1305-sse2-glue.o
-+blake2s-x86_64-y := blake2s-core.o blake2s-glue.o
- 
- ifeq ($(avx_supported),yes)
- 	camellia-aesni-avx-x86_64-y := camellia-aesni-avx-asm_64.o \
---- /dev/null
-+++ b/arch/x86/crypto/blake2s-core.S
-@@ -0,0 +1,258 @@
-+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ * Copyright (C) 2017-2019 Samuel Neves <sneves@dei.uc.pt>. All Rights Reserved.
-+ */
-+
-+#include <linux/linkage.h>
-+
-+.section .rodata.cst32.BLAKE2S_IV, "aM", @progbits, 32
-+.align 32
-+IV:	.octa 0xA54FF53A3C6EF372BB67AE856A09E667
-+	.octa 0x5BE0CD191F83D9AB9B05688C510E527F
-+.section .rodata.cst16.ROT16, "aM", @progbits, 16
-+.align 16
-+ROT16:	.octa 0x0D0C0F0E09080B0A0504070601000302
-+.section .rodata.cst16.ROR328, "aM", @progbits, 16
-+.align 16
-+ROR328:	.octa 0x0C0F0E0D080B0A090407060500030201
-+.section .rodata.cst64.BLAKE2S_SIGMA, "aM", @progbits, 160
-+.align 64
-+SIGMA:
-+.byte  0,  2,  4,  6,  1,  3,  5,  7, 14,  8, 10, 12, 15,  9, 11, 13
-+.byte 14,  4,  9, 13, 10,  8, 15,  6,  5,  1,  0, 11,  3, 12,  2,  7
-+.byte 11, 12,  5, 15,  8,  0,  2, 13,  9, 10,  3,  7,  4, 14,  6,  1
-+.byte  7,  3, 13, 11,  9,  1, 12, 14, 15,  2,  5,  4,  8,  6, 10,  0
-+.byte  9,  5,  2, 10,  0,  7,  4, 15,  3, 14, 11,  6, 13,  1, 12,  8
-+.byte  2,  6,  0,  8, 12, 10, 11,  3,  1,  4,  7, 15,  9, 13,  5, 14
-+.byte 12,  1, 14,  4,  5, 15, 13, 10,  8,  0,  6,  9, 11,  7,  3,  2
-+.byte 13,  7, 12,  3, 11, 14,  1,  9,  2,  5, 15,  8, 10,  0,  4,  6
-+.byte  6, 14, 11,  0, 15,  9,  3,  8, 10, 12, 13,  1,  5,  2,  7,  4
-+.byte 10,  8,  7,  1,  2,  4,  6,  5, 13, 15,  9,  3,  0, 11, 14, 12
-+#ifdef CONFIG_AS_AVX512
-+.section .rodata.cst64.BLAKE2S_SIGMA2, "aM", @progbits, 640
-+.align 64
-+SIGMA2:
-+.long  0,  2,  4,  6,  1,  3,  5,  7, 14,  8, 10, 12, 15,  9, 11, 13
-+.long  8,  2, 13, 15, 10,  9, 12,  3,  6,  4,  0, 14,  5, 11,  1,  7
-+.long 11, 13,  8,  6,  5, 10, 14,  3,  2,  4, 12, 15,  1,  0,  7,  9
-+.long 11, 10,  7,  0,  8, 15,  1, 13,  3,  6,  2, 12,  4, 14,  9,  5
-+.long  4, 10,  9, 14, 15,  0, 11,  8,  1,  7,  3, 13,  2,  5,  6, 12
-+.long  2, 11,  4, 15, 14,  3, 10,  8, 13,  6,  5,  7,  0, 12,  1,  9
-+.long  4,  8, 15,  9, 14, 11, 13,  5,  3,  2,  1, 12,  6, 10,  7,  0
-+.long  6, 13,  0, 14, 12,  2,  1, 11, 15,  4,  5,  8,  7,  9,  3, 10
-+.long 15,  5,  4, 13, 10,  7,  3, 11, 12,  2,  0,  6,  9,  8,  1, 14
-+.long  8,  7, 14, 11, 13, 15,  0, 12, 10,  4,  5,  6,  3,  2,  1,  9
-+#endif /* CONFIG_AS_AVX512 */
-+
-+.text
-+#ifdef CONFIG_AS_SSSE3
-+ENTRY(blake2s_compress_ssse3)
-+	testq		%rdx,%rdx
-+	je		.Lendofloop
-+	movdqu		(%rdi),%xmm0
-+	movdqu		0x10(%rdi),%xmm1
-+	movdqa		ROT16(%rip),%xmm12
-+	movdqa		ROR328(%rip),%xmm13
-+	movdqu		0x20(%rdi),%xmm14
-+	movq		%rcx,%xmm15
-+	leaq		SIGMA+0xa0(%rip),%r8
-+	jmp		.Lbeginofloop
-+	.align		32
-+.Lbeginofloop:
-+	movdqa		%xmm0,%xmm10
-+	movdqa		%xmm1,%xmm11
-+	paddq		%xmm15,%xmm14
-+	movdqa		IV(%rip),%xmm2
-+	movdqa		%xmm14,%xmm3
-+	pxor		IV+0x10(%rip),%xmm3
-+	leaq		SIGMA(%rip),%rcx
-+.Lroundloop:
-+	movzbl		(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm4
-+	movzbl		0x1(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm5
-+	movzbl		0x2(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm6
-+	movzbl		0x3(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm7
-+	punpckldq	%xmm5,%xmm4
-+	punpckldq	%xmm7,%xmm6
-+	punpcklqdq	%xmm6,%xmm4
-+	paddd		%xmm4,%xmm0
-+	paddd		%xmm1,%xmm0
-+	pxor		%xmm0,%xmm3
-+	pshufb		%xmm12,%xmm3
-+	paddd		%xmm3,%xmm2
-+	pxor		%xmm2,%xmm1
-+	movdqa		%xmm1,%xmm8
-+	psrld		$0xc,%xmm1
-+	pslld		$0x14,%xmm8
-+	por		%xmm8,%xmm1
-+	movzbl		0x4(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm5
-+	movzbl		0x5(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm6
-+	movzbl		0x6(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm7
-+	movzbl		0x7(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm4
-+	punpckldq	%xmm6,%xmm5
-+	punpckldq	%xmm4,%xmm7
-+	punpcklqdq	%xmm7,%xmm5
-+	paddd		%xmm5,%xmm0
-+	paddd		%xmm1,%xmm0
-+	pxor		%xmm0,%xmm3
-+	pshufb		%xmm13,%xmm3
-+	paddd		%xmm3,%xmm2
-+	pxor		%xmm2,%xmm1
-+	movdqa		%xmm1,%xmm8
-+	psrld		$0x7,%xmm1
-+	pslld		$0x19,%xmm8
-+	por		%xmm8,%xmm1
-+	pshufd		$0x93,%xmm0,%xmm0
-+	pshufd		$0x4e,%xmm3,%xmm3
-+	pshufd		$0x39,%xmm2,%xmm2
-+	movzbl		0x8(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm6
-+	movzbl		0x9(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm7
-+	movzbl		0xa(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm4
-+	movzbl		0xb(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm5
-+	punpckldq	%xmm7,%xmm6
-+	punpckldq	%xmm5,%xmm4
-+	punpcklqdq	%xmm4,%xmm6
-+	paddd		%xmm6,%xmm0
-+	paddd		%xmm1,%xmm0
-+	pxor		%xmm0,%xmm3
-+	pshufb		%xmm12,%xmm3
-+	paddd		%xmm3,%xmm2
-+	pxor		%xmm2,%xmm1
-+	movdqa		%xmm1,%xmm8
-+	psrld		$0xc,%xmm1
-+	pslld		$0x14,%xmm8
-+	por		%xmm8,%xmm1
-+	movzbl		0xc(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm7
-+	movzbl		0xd(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm4
-+	movzbl		0xe(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm5
-+	movzbl		0xf(%rcx),%eax
-+	movd		(%rsi,%rax,4),%xmm6
-+	punpckldq	%xmm4,%xmm7
-+	punpckldq	%xmm6,%xmm5
-+	punpcklqdq	%xmm5,%xmm7
-+	paddd		%xmm7,%xmm0
-+	paddd		%xmm1,%xmm0
-+	pxor		%xmm0,%xmm3
-+	pshufb		%xmm13,%xmm3
-+	paddd		%xmm3,%xmm2
-+	pxor		%xmm2,%xmm1
-+	movdqa		%xmm1,%xmm8
-+	psrld		$0x7,%xmm1
-+	pslld		$0x19,%xmm8
-+	por		%xmm8,%xmm1
-+	pshufd		$0x39,%xmm0,%xmm0
-+	pshufd		$0x4e,%xmm3,%xmm3
-+	pshufd		$0x93,%xmm2,%xmm2
-+	addq		$0x10,%rcx
-+	cmpq		%r8,%rcx
-+	jnz		.Lroundloop
-+	pxor		%xmm2,%xmm0
-+	pxor		%xmm3,%xmm1
-+	pxor		%xmm10,%xmm0
-+	pxor		%xmm11,%xmm1
-+	addq		$0x40,%rsi
-+	decq		%rdx
-+	jnz		.Lbeginofloop
-+	movdqu		%xmm0,(%rdi)
-+	movdqu		%xmm1,0x10(%rdi)
-+	movdqu		%xmm14,0x20(%rdi)
-+.Lendofloop:
-+	ret
-+ENDPROC(blake2s_compress_ssse3)
-+#endif /* CONFIG_AS_SSSE3 */
-+
-+#ifdef CONFIG_AS_AVX512
-+ENTRY(blake2s_compress_avx512)
-+	vmovdqu		(%rdi),%xmm0
-+	vmovdqu		0x10(%rdi),%xmm1
-+	vmovdqu		0x20(%rdi),%xmm4
-+	vmovq		%rcx,%xmm5
-+	vmovdqa		IV(%rip),%xmm14
-+	vmovdqa		IV+16(%rip),%xmm15
-+	jmp		.Lblake2s_compress_avx512_mainloop
-+.align 32
-+.Lblake2s_compress_avx512_mainloop:
-+	vmovdqa		%xmm0,%xmm10
-+	vmovdqa		%xmm1,%xmm11
-+	vpaddq		%xmm5,%xmm4,%xmm4
-+	vmovdqa		%xmm14,%xmm2
-+	vpxor		%xmm15,%xmm4,%xmm3
-+	vmovdqu		(%rsi),%ymm6
-+	vmovdqu		0x20(%rsi),%ymm7
-+	addq		$0x40,%rsi
-+	leaq		SIGMA2(%rip),%rax
-+	movb		$0xa,%cl
-+.Lblake2s_compress_avx512_roundloop:
-+	addq		$0x40,%rax
-+	vmovdqa		-0x40(%rax),%ymm8
-+	vmovdqa		-0x20(%rax),%ymm9
-+	vpermi2d	%ymm7,%ymm6,%ymm8
-+	vpermi2d	%ymm7,%ymm6,%ymm9
-+	vmovdqa		%ymm8,%ymm6
-+	vmovdqa		%ymm9,%ymm7
-+	vpaddd		%xmm8,%xmm0,%xmm0
-+	vpaddd		%xmm1,%xmm0,%xmm0
-+	vpxor		%xmm0,%xmm3,%xmm3
-+	vprord		$0x10,%xmm3,%xmm3
-+	vpaddd		%xmm3,%xmm2,%xmm2
-+	vpxor		%xmm2,%xmm1,%xmm1
-+	vprord		$0xc,%xmm1,%xmm1
-+	vextracti128	$0x1,%ymm8,%xmm8
-+	vpaddd		%xmm8,%xmm0,%xmm0
-+	vpaddd		%xmm1,%xmm0,%xmm0
-+	vpxor		%xmm0,%xmm3,%xmm3
-+	vprord		$0x8,%xmm3,%xmm3
-+	vpaddd		%xmm3,%xmm2,%xmm2
-+	vpxor		%xmm2,%xmm1,%xmm1
-+	vprord		$0x7,%xmm1,%xmm1
-+	vpshufd		$0x93,%xmm0,%xmm0
-+	vpshufd		$0x4e,%xmm3,%xmm3
-+	vpshufd		$0x39,%xmm2,%xmm2
-+	vpaddd		%xmm9,%xmm0,%xmm0
-+	vpaddd		%xmm1,%xmm0,%xmm0
-+	vpxor		%xmm0,%xmm3,%xmm3
-+	vprord		$0x10,%xmm3,%xmm3
-+	vpaddd		%xmm3,%xmm2,%xmm2
-+	vpxor		%xmm2,%xmm1,%xmm1
-+	vprord		$0xc,%xmm1,%xmm1
-+	vextracti128	$0x1,%ymm9,%xmm9
-+	vpaddd		%xmm9,%xmm0,%xmm0
-+	vpaddd		%xmm1,%xmm0,%xmm0
-+	vpxor		%xmm0,%xmm3,%xmm3
-+	vprord		$0x8,%xmm3,%xmm3
-+	vpaddd		%xmm3,%xmm2,%xmm2
-+	vpxor		%xmm2,%xmm1,%xmm1
-+	vprord		$0x7,%xmm1,%xmm1
-+	vpshufd		$0x39,%xmm0,%xmm0
-+	vpshufd		$0x4e,%xmm3,%xmm3
-+	vpshufd		$0x93,%xmm2,%xmm2
-+	decb		%cl
-+	jne		.Lblake2s_compress_avx512_roundloop
-+	vpxor		%xmm10,%xmm0,%xmm0
-+	vpxor		%xmm11,%xmm1,%xmm1
-+	vpxor		%xmm2,%xmm0,%xmm0
-+	vpxor		%xmm3,%xmm1,%xmm1
-+	decq		%rdx
-+	jne		.Lblake2s_compress_avx512_mainloop
-+	vmovdqu		%xmm0,(%rdi)
-+	vmovdqu		%xmm1,0x10(%rdi)
-+	vmovdqu		%xmm4,0x20(%rdi)
-+	vzeroupper
-+	retq
-+ENDPROC(blake2s_compress_avx512)
-+#endif /* CONFIG_AS_AVX512 */
---- /dev/null
-+++ b/arch/x86/crypto/blake2s-glue.c
-@@ -0,0 +1,233 @@
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include <crypto/internal/blake2s.h>
-+#include <crypto/internal/simd.h>
-+#include <crypto/internal/hash.h>
-+
-+#include <linux/types.h>
-+#include <linux/jump_label.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+
-+#include <asm/cpufeature.h>
-+#include <asm/fpu/api.h>
-+#include <asm/processor.h>
-+#include <asm/simd.h>
-+
-+asmlinkage void blake2s_compress_ssse3(struct blake2s_state *state,
-+				       const u8 *block, const size_t nblocks,
-+				       const u32 inc);
-+asmlinkage void blake2s_compress_avx512(struct blake2s_state *state,
-+					const u8 *block, const size_t nblocks,
-+					const u32 inc);
-+
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(blake2s_use_ssse3);
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(blake2s_use_avx512);
-+
-+void blake2s_compress_arch(struct blake2s_state *state,
-+			   const u8 *block, size_t nblocks,
-+			   const u32 inc)
-+{
-+	/* SIMD disables preemption, so relax after processing each page. */
-+	BUILD_BUG_ON(PAGE_SIZE / BLAKE2S_BLOCK_SIZE < 8);
-+
-+	if (!static_branch_likely(&blake2s_use_ssse3) || !crypto_simd_usable()) {
-+		blake2s_compress_generic(state, block, nblocks, inc);
-+		return;
-+	}
-+
-+	for (;;) {
-+		const size_t blocks = min_t(size_t, nblocks,
-+					    PAGE_SIZE / BLAKE2S_BLOCK_SIZE);
-+
-+		kernel_fpu_begin();
-+		if (IS_ENABLED(CONFIG_AS_AVX512) &&
-+		    static_branch_likely(&blake2s_use_avx512))
-+			blake2s_compress_avx512(state, block, blocks, inc);
-+		else
-+			blake2s_compress_ssse3(state, block, blocks, inc);
-+		kernel_fpu_end();
-+
-+		nblocks -= blocks;
-+		if (!nblocks)
-+			break;
-+		block += blocks * BLAKE2S_BLOCK_SIZE;
-+	}
-+}
-+EXPORT_SYMBOL(blake2s_compress_arch);
-+
-+static int crypto_blake2s_setkey(struct crypto_shash *tfm, const u8 *key,
-+				 unsigned int keylen)
-+{
-+	struct blake2s_tfm_ctx *tctx = crypto_shash_ctx(tfm);
-+
-+	if (keylen == 0 || keylen > BLAKE2S_KEY_SIZE) {
-+		crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
-+		return -EINVAL;
-+	}
-+
-+	memcpy(tctx->key, key, keylen);
-+	tctx->keylen = keylen;
-+
-+	return 0;
-+}
-+
-+static int crypto_blake2s_init(struct shash_desc *desc)
-+{
-+	struct blake2s_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
-+	struct blake2s_state *state = shash_desc_ctx(desc);
-+	const int outlen = crypto_shash_digestsize(desc->tfm);
-+
-+	if (tctx->keylen)
-+		blake2s_init_key(state, outlen, tctx->key, tctx->keylen);
-+	else
-+		blake2s_init(state, outlen);
-+
-+	return 0;
-+}
-+
-+static int crypto_blake2s_update(struct shash_desc *desc, const u8 *in,
-+				 unsigned int inlen)
-+{
-+	struct blake2s_state *state = shash_desc_ctx(desc);
-+	const size_t fill = BLAKE2S_BLOCK_SIZE - state->buflen;
-+
-+	if (unlikely(!inlen))
-+		return 0;
-+	if (inlen > fill) {
-+		memcpy(state->buf + state->buflen, in, fill);
-+		blake2s_compress_arch(state, state->buf, 1, BLAKE2S_BLOCK_SIZE);
-+		state->buflen = 0;
-+		in += fill;
-+		inlen -= fill;
-+	}
-+	if (inlen > BLAKE2S_BLOCK_SIZE) {
-+		const size_t nblocks = DIV_ROUND_UP(inlen, BLAKE2S_BLOCK_SIZE);
-+		/* Hash one less (full) block than strictly possible */
-+		blake2s_compress_arch(state, in, nblocks - 1, BLAKE2S_BLOCK_SIZE);
-+		in += BLAKE2S_BLOCK_SIZE * (nblocks - 1);
-+		inlen -= BLAKE2S_BLOCK_SIZE * (nblocks - 1);
-+	}
-+	memcpy(state->buf + state->buflen, in, inlen);
-+	state->buflen += inlen;
-+
-+	return 0;
-+}
-+
-+static int crypto_blake2s_final(struct shash_desc *desc, u8 *out)
-+{
-+	struct blake2s_state *state = shash_desc_ctx(desc);
-+
-+	blake2s_set_lastblock(state);
-+	memset(state->buf + state->buflen, 0,
-+	       BLAKE2S_BLOCK_SIZE - state->buflen); /* Padding */
-+	blake2s_compress_arch(state, state->buf, 1, state->buflen);
-+	cpu_to_le32_array(state->h, ARRAY_SIZE(state->h));
-+	memcpy(out, state->h, state->outlen);
-+	memzero_explicit(state, sizeof(*state));
-+
-+	return 0;
-+}
-+
-+static struct shash_alg blake2s_algs[] = {{
-+	.base.cra_name		= "blake2s-128",
-+	.base.cra_driver_name	= "blake2s-128-x86",
-+	.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,
-+	.base.cra_ctxsize	= sizeof(struct blake2s_tfm_ctx),
-+	.base.cra_priority	= 200,
-+	.base.cra_blocksize     = BLAKE2S_BLOCK_SIZE,
-+	.base.cra_module	= THIS_MODULE,
-+
-+	.digestsize		= BLAKE2S_128_HASH_SIZE,
-+	.setkey			= crypto_blake2s_setkey,
-+	.init			= crypto_blake2s_init,
-+	.update			= crypto_blake2s_update,
-+	.final			= crypto_blake2s_final,
-+	.descsize		= sizeof(struct blake2s_state),
-+}, {
-+	.base.cra_name		= "blake2s-160",
-+	.base.cra_driver_name	= "blake2s-160-x86",
-+	.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,
-+	.base.cra_ctxsize	= sizeof(struct blake2s_tfm_ctx),
-+	.base.cra_priority	= 200,
-+	.base.cra_blocksize     = BLAKE2S_BLOCK_SIZE,
-+	.base.cra_module	= THIS_MODULE,
-+
-+	.digestsize		= BLAKE2S_160_HASH_SIZE,
-+	.setkey			= crypto_blake2s_setkey,
-+	.init			= crypto_blake2s_init,
-+	.update			= crypto_blake2s_update,
-+	.final			= crypto_blake2s_final,
-+	.descsize		= sizeof(struct blake2s_state),
-+}, {
-+	.base.cra_name		= "blake2s-224",
-+	.base.cra_driver_name	= "blake2s-224-x86",
-+	.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,
-+	.base.cra_ctxsize	= sizeof(struct blake2s_tfm_ctx),
-+	.base.cra_priority	= 200,
-+	.base.cra_blocksize     = BLAKE2S_BLOCK_SIZE,
-+	.base.cra_module	= THIS_MODULE,
-+
-+	.digestsize		= BLAKE2S_224_HASH_SIZE,
-+	.setkey			= crypto_blake2s_setkey,
-+	.init			= crypto_blake2s_init,
-+	.update			= crypto_blake2s_update,
-+	.final			= crypto_blake2s_final,
-+	.descsize		= sizeof(struct blake2s_state),
-+}, {
-+	.base.cra_name		= "blake2s-256",
-+	.base.cra_driver_name	= "blake2s-256-x86",
-+	.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,
-+	.base.cra_ctxsize	= sizeof(struct blake2s_tfm_ctx),
-+	.base.cra_priority	= 200,
-+	.base.cra_blocksize     = BLAKE2S_BLOCK_SIZE,
-+	.base.cra_module	= THIS_MODULE,
-+
-+	.digestsize		= BLAKE2S_256_HASH_SIZE,
-+	.setkey			= crypto_blake2s_setkey,
-+	.init			= crypto_blake2s_init,
-+	.update			= crypto_blake2s_update,
-+	.final			= crypto_blake2s_final,
-+	.descsize		= sizeof(struct blake2s_state),
-+}};
-+
-+static int __init blake2s_mod_init(void)
-+{
-+	if (!boot_cpu_has(X86_FEATURE_SSSE3))
-+		return 0;
-+
-+	static_branch_enable(&blake2s_use_ssse3);
-+
-+	if (IS_ENABLED(CONFIG_AS_AVX512) &&
-+	    boot_cpu_has(X86_FEATURE_AVX) &&
-+	    boot_cpu_has(X86_FEATURE_AVX2) &&
-+	    boot_cpu_has(X86_FEATURE_AVX512F) &&
-+	    boot_cpu_has(X86_FEATURE_AVX512VL) &&
-+	    cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM |
-+			      XFEATURE_MASK_AVX512, NULL))
-+		static_branch_enable(&blake2s_use_avx512);
-+
-+	return crypto_register_shashes(blake2s_algs, ARRAY_SIZE(blake2s_algs));
-+}
-+
-+static void __exit blake2s_mod_exit(void)
-+{
-+	if (boot_cpu_has(X86_FEATURE_SSSE3))
-+		crypto_unregister_shashes(blake2s_algs, ARRAY_SIZE(blake2s_algs));
-+}
-+
-+module_init(blake2s_mod_init);
-+module_exit(blake2s_mod_exit);
-+
-+MODULE_ALIAS_CRYPTO("blake2s-128");
-+MODULE_ALIAS_CRYPTO("blake2s-128-x86");
-+MODULE_ALIAS_CRYPTO("blake2s-160");
-+MODULE_ALIAS_CRYPTO("blake2s-160-x86");
-+MODULE_ALIAS_CRYPTO("blake2s-224");
-+MODULE_ALIAS_CRYPTO("blake2s-224-x86");
-+MODULE_ALIAS_CRYPTO("blake2s-256");
-+MODULE_ALIAS_CRYPTO("blake2s-256-x86");
-+MODULE_LICENSE("GPL v2");
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -657,6 +657,12 @@ config CRYPTO_BLAKE2S
- 
- 	  See https://blake2.net for further information.
- 
-+config CRYPTO_BLAKE2S_X86
-+	tristate "BLAKE2s digest algorithm (x86 accelerated version)"
-+	depends on X86 && 64BIT
-+	select CRYPTO_LIB_BLAKE2S_GENERIC
-+	select CRYPTO_ARCH_HAVE_LIB_BLAKE2S
-+
- config CRYPTO_CRCT10DIF
- 	tristate "CRCT10DIF algorithm"
- 	select CRYPTO_HASH
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0025-crypto-curve25519-generic-C-library-implementations.patch b/target/linux/generic/backport-5.4/080-wireguard-0025-crypto-curve25519-generic-C-library-implementations.patch
deleted file mode 100644
index e58dda9213..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0025-crypto-curve25519-generic-C-library-implementations.patch
+++ /dev/null
@@ -1,1849 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 8 Nov 2019 13:22:32 +0100
-Subject: [PATCH] crypto: curve25519 - generic C library implementations
-
-commit 0ed42a6f431e930b2e8fae21955406e09fe75d70 upstream.
-
-This contains two formally verified C implementations of the Curve25519
-scalar multiplication function, one for 32-bit systems, and one for
-64-bit systems whose compiler supports efficient 128-bit integer types.
-Not only are these implementations formally verified, but they are also
-the fastest available C implementations. They have been modified to be
-friendly to kernel space and to be generally less horrendous looking,
-but still an effort has been made to retain their formally verified
-characteristic, and so the C might look slightly unidiomatic.
-
-The 64-bit version comes from HACL*: https://github.com/project-everest/hacl-star
-The 32-bit version comes from Fiat: https://github.com/mit-plv/fiat-crypto
-
-Information: https://cr.yp.to/ecdh.html
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-[ardb: - move from lib/zinc to lib/crypto
-       - replace .c #includes with Kconfig based object selection
-       - drop simd handling and simplify support for per-arch versions ]
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- include/crypto/curve25519.h    |  71 +++
- lib/crypto/Kconfig             |  25 +
- lib/crypto/Makefile            |   5 +
- lib/crypto/curve25519-fiat32.c | 864 +++++++++++++++++++++++++++++++++
- lib/crypto/curve25519-hacl64.c | 788 ++++++++++++++++++++++++++++++
- lib/crypto/curve25519.c        |  25 +
- 6 files changed, 1778 insertions(+)
- create mode 100644 include/crypto/curve25519.h
- create mode 100644 lib/crypto/curve25519-fiat32.c
- create mode 100644 lib/crypto/curve25519-hacl64.c
- create mode 100644 lib/crypto/curve25519.c
-
---- /dev/null
-+++ b/include/crypto/curve25519.h
-@@ -0,0 +1,71 @@
-+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifndef CURVE25519_H
-+#define CURVE25519_H
-+
-+#include <crypto/algapi.h> // For crypto_memneq.
-+#include <linux/types.h>
-+#include <linux/random.h>
-+
-+enum curve25519_lengths {
-+	CURVE25519_KEY_SIZE = 32
-+};
-+
-+extern const u8 curve25519_null_point[];
-+extern const u8 curve25519_base_point[];
-+
-+void curve25519_generic(u8 out[CURVE25519_KEY_SIZE],
-+			const u8 scalar[CURVE25519_KEY_SIZE],
-+			const u8 point[CURVE25519_KEY_SIZE]);
-+
-+void curve25519_arch(u8 out[CURVE25519_KEY_SIZE],
-+		     const u8 scalar[CURVE25519_KEY_SIZE],
-+		     const u8 point[CURVE25519_KEY_SIZE]);
-+
-+void curve25519_base_arch(u8 pub[CURVE25519_KEY_SIZE],
-+			  const u8 secret[CURVE25519_KEY_SIZE]);
-+
-+static inline
-+bool __must_check curve25519(u8 mypublic[CURVE25519_KEY_SIZE],
-+			     const u8 secret[CURVE25519_KEY_SIZE],
-+			     const u8 basepoint[CURVE25519_KEY_SIZE])
-+{
-+	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519))
-+		curve25519_arch(mypublic, secret, basepoint);
-+	else
-+		curve25519_generic(mypublic, secret, basepoint);
-+	return crypto_memneq(mypublic, curve25519_null_point,
-+			     CURVE25519_KEY_SIZE);
-+}
-+
-+static inline bool
-+__must_check curve25519_generate_public(u8 pub[CURVE25519_KEY_SIZE],
-+					const u8 secret[CURVE25519_KEY_SIZE])
-+{
-+	if (unlikely(!crypto_memneq(secret, curve25519_null_point,
-+				    CURVE25519_KEY_SIZE)))
-+		return false;
-+
-+	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519))
-+		curve25519_base_arch(pub, secret);
-+	else
-+		curve25519_generic(pub, secret, curve25519_base_point);
-+	return crypto_memneq(pub, curve25519_null_point, CURVE25519_KEY_SIZE);
-+}
-+
-+static inline void curve25519_clamp_secret(u8 secret[CURVE25519_KEY_SIZE])
-+{
-+	secret[0] &= 248;
-+	secret[31] = (secret[31] & 127) | 64;
-+}
-+
-+static inline void curve25519_generate_secret(u8 secret[CURVE25519_KEY_SIZE])
-+{
-+	get_random_bytes_wait(secret, CURVE25519_KEY_SIZE);
-+	curve25519_clamp_secret(secret);
-+}
-+
-+#endif /* CURVE25519_H */
---- a/lib/crypto/Kconfig
-+++ b/lib/crypto/Kconfig
-@@ -59,6 +59,31 @@ config CRYPTO_LIB_CHACHA
- 	  by either the generic implementation or an arch-specific one, if one
- 	  is available and enabled.
- 
-+config CRYPTO_ARCH_HAVE_LIB_CURVE25519
-+	tristate
-+	help
-+	  Declares whether the architecture provides an arch-specific
-+	  accelerated implementation of the Curve25519 library interface,
-+	  either builtin or as a module.
-+
-+config CRYPTO_LIB_CURVE25519_GENERIC
-+	tristate
-+	help
-+	  This symbol can be depended upon by arch implementations of the
-+	  Curve25519 library interface that require the generic code as a
-+	  fallback, e.g., for SIMD implementations. If no arch specific
-+	  implementation is enabled, this implementation serves the users
-+	  of CRYPTO_LIB_CURVE25519.
-+
-+config CRYPTO_LIB_CURVE25519
-+	tristate "Curve25519 scalar multiplication library"
-+	depends on CRYPTO_ARCH_HAVE_LIB_CURVE25519 || !CRYPTO_ARCH_HAVE_LIB_CURVE25519
-+	select CRYPTO_LIB_CURVE25519_GENERIC if CRYPTO_ARCH_HAVE_LIB_CURVE25519=n
-+	help
-+	  Enable the Curve25519 library interface. This interface may be
-+	  fulfilled by either the generic implementation or an arch-specific
-+	  one, if one is available and enabled.
-+
- config CRYPTO_LIB_DES
- 	tristate
- 
---- a/lib/crypto/Makefile
-+++ b/lib/crypto/Makefile
-@@ -16,6 +16,11 @@ libblake2s-generic-y				+= blake2s-gener
- obj-$(CONFIG_CRYPTO_LIB_BLAKE2S)		+= libblake2s.o
- libblake2s-y					+= blake2s.o
- 
-+obj-$(CONFIG_CRYPTO_LIB_CURVE25519_GENERIC)	+= libcurve25519.o
-+libcurve25519-y					:= curve25519-fiat32.o
-+libcurve25519-$(CONFIG_ARCH_SUPPORTS_INT128)	:= curve25519-hacl64.o
-+libcurve25519-y					+= curve25519.o
-+
- obj-$(CONFIG_CRYPTO_LIB_DES)			+= libdes.o
- libdes-y					:= des.o
- 
---- /dev/null
-+++ b/lib/crypto/curve25519-fiat32.c
-@@ -0,0 +1,864 @@
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
-+/*
-+ * Copyright (C) 2015-2016 The fiat-crypto Authors.
-+ * Copyright (C) 2018-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ *
-+ * This is a machine-generated formally verified implementation of Curve25519
-+ * ECDH from: <https://github.com/mit-plv/fiat-crypto>. Though originally
-+ * machine generated, it has been tweaked to be suitable for use in the kernel.
-+ * It is optimized for 32-bit machines and machines that cannot work efficiently
-+ * with 128-bit integer types.
-+ */
-+
-+#include <asm/unaligned.h>
-+#include <crypto/curve25519.h>
-+#include <linux/string.h>
-+
-+/* fe means field element. Here the field is \Z/(2^255-19). An element t,
-+ * entries t[0]...t[9], represents the integer t[0]+2^26 t[1]+2^51 t[2]+2^77
-+ * t[3]+2^102 t[4]+...+2^230 t[9].
-+ * fe limbs are bounded by 1.125*2^26,1.125*2^25,1.125*2^26,1.125*2^25,etc.
-+ * Multiplication and carrying produce fe from fe_loose.
-+ */
-+typedef struct fe { u32 v[10]; } fe;
-+
-+/* fe_loose limbs are bounded by 3.375*2^26,3.375*2^25,3.375*2^26,3.375*2^25,etc
-+ * Addition and subtraction produce fe_loose from (fe, fe).
-+ */
-+typedef struct fe_loose { u32 v[10]; } fe_loose;
-+
-+static __always_inline void fe_frombytes_impl(u32 h[10], const u8 *s)
-+{
-+	/* Ignores top bit of s. */
-+	u32 a0 = get_unaligned_le32(s);
-+	u32 a1 = get_unaligned_le32(s+4);
-+	u32 a2 = get_unaligned_le32(s+8);
-+	u32 a3 = get_unaligned_le32(s+12);
-+	u32 a4 = get_unaligned_le32(s+16);
-+	u32 a5 = get_unaligned_le32(s+20);
-+	u32 a6 = get_unaligned_le32(s+24);
-+	u32 a7 = get_unaligned_le32(s+28);
-+	h[0] = a0&((1<<26)-1);                    /* 26 used, 32-26 left.   26 */
-+	h[1] = (a0>>26) | ((a1&((1<<19)-1))<< 6); /* (32-26) + 19 =  6+19 = 25 */
-+	h[2] = (a1>>19) | ((a2&((1<<13)-1))<<13); /* (32-19) + 13 = 13+13 = 26 */
-+	h[3] = (a2>>13) | ((a3&((1<< 6)-1))<<19); /* (32-13) +  6 = 19+ 6 = 25 */
-+	h[4] = (a3>> 6);                          /* (32- 6)              = 26 */
-+	h[5] = a4&((1<<25)-1);                    /*                        25 */
-+	h[6] = (a4>>25) | ((a5&((1<<19)-1))<< 7); /* (32-25) + 19 =  7+19 = 26 */
-+	h[7] = (a5>>19) | ((a6&((1<<12)-1))<<13); /* (32-19) + 12 = 13+12 = 25 */
-+	h[8] = (a6>>12) | ((a7&((1<< 6)-1))<<20); /* (32-12) +  6 = 20+ 6 = 26 */
-+	h[9] = (a7>> 6)&((1<<25)-1); /*                                     25 */
-+}
-+
-+static __always_inline void fe_frombytes(fe *h, const u8 *s)
-+{
-+	fe_frombytes_impl(h->v, s);
-+}
-+
-+static __always_inline u8 /*bool*/
-+addcarryx_u25(u8 /*bool*/ c, u32 a, u32 b, u32 *low)
-+{
-+	/* This function extracts 25 bits of result and 1 bit of carry
-+	 * (26 total), so a 32-bit intermediate is sufficient.
-+	 */
-+	u32 x = a + b + c;
-+	*low = x & ((1 << 25) - 1);
-+	return (x >> 25) & 1;
-+}
-+
-+static __always_inline u8 /*bool*/
-+addcarryx_u26(u8 /*bool*/ c, u32 a, u32 b, u32 *low)
-+{
-+	/* This function extracts 26 bits of result and 1 bit of carry
-+	 * (27 total), so a 32-bit intermediate is sufficient.
-+	 */
-+	u32 x = a + b + c;
-+	*low = x & ((1 << 26) - 1);
-+	return (x >> 26) & 1;
-+}
-+
-+static __always_inline u8 /*bool*/
-+subborrow_u25(u8 /*bool*/ c, u32 a, u32 b, u32 *low)
-+{
-+	/* This function extracts 25 bits of result and 1 bit of borrow
-+	 * (26 total), so a 32-bit intermediate is sufficient.
-+	 */
-+	u32 x = a - b - c;
-+	*low = x & ((1 << 25) - 1);
-+	return x >> 31;
-+}
-+
-+static __always_inline u8 /*bool*/
-+subborrow_u26(u8 /*bool*/ c, u32 a, u32 b, u32 *low)
-+{
-+	/* This function extracts 26 bits of result and 1 bit of borrow
-+	 *(27 total), so a 32-bit intermediate is sufficient.
-+	 */
-+	u32 x = a - b - c;
-+	*low = x & ((1 << 26) - 1);
-+	return x >> 31;
-+}
-+
-+static __always_inline u32 cmovznz32(u32 t, u32 z, u32 nz)
-+{
-+	t = -!!t; /* all set if nonzero, 0 if 0 */
-+	return (t&nz) | ((~t)&z);
-+}
-+
-+static __always_inline void fe_freeze(u32 out[10], const u32 in1[10])
-+{
-+	{ const u32 x17 = in1[9];
-+	{ const u32 x18 = in1[8];
-+	{ const u32 x16 = in1[7];
-+	{ const u32 x14 = in1[6];
-+	{ const u32 x12 = in1[5];
-+	{ const u32 x10 = in1[4];
-+	{ const u32 x8 = in1[3];
-+	{ const u32 x6 = in1[2];
-+	{ const u32 x4 = in1[1];
-+	{ const u32 x2 = in1[0];
-+	{ u32 x20; u8/*bool*/ x21 = subborrow_u26(0x0, x2, 0x3ffffed, &x20);
-+	{ u32 x23; u8/*bool*/ x24 = subborrow_u25(x21, x4, 0x1ffffff, &x23);
-+	{ u32 x26; u8/*bool*/ x27 = subborrow_u26(x24, x6, 0x3ffffff, &x26);
-+	{ u32 x29; u8/*bool*/ x30 = subborrow_u25(x27, x8, 0x1ffffff, &x29);
-+	{ u32 x32; u8/*bool*/ x33 = subborrow_u26(x30, x10, 0x3ffffff, &x32);
-+	{ u32 x35; u8/*bool*/ x36 = subborrow_u25(x33, x12, 0x1ffffff, &x35);
-+	{ u32 x38; u8/*bool*/ x39 = subborrow_u26(x36, x14, 0x3ffffff, &x38);
-+	{ u32 x41; u8/*bool*/ x42 = subborrow_u25(x39, x16, 0x1ffffff, &x41);
-+	{ u32 x44; u8/*bool*/ x45 = subborrow_u26(x42, x18, 0x3ffffff, &x44);
-+	{ u32 x47; u8/*bool*/ x48 = subborrow_u25(x45, x17, 0x1ffffff, &x47);
-+	{ u32 x49 = cmovznz32(x48, 0x0, 0xffffffff);
-+	{ u32 x50 = (x49 & 0x3ffffed);
-+	{ u32 x52; u8/*bool*/ x53 = addcarryx_u26(0x0, x20, x50, &x52);
-+	{ u32 x54 = (x49 & 0x1ffffff);
-+	{ u32 x56; u8/*bool*/ x57 = addcarryx_u25(x53, x23, x54, &x56);
-+	{ u32 x58 = (x49 & 0x3ffffff);
-+	{ u32 x60; u8/*bool*/ x61 = addcarryx_u26(x57, x26, x58, &x60);
-+	{ u32 x62 = (x49 & 0x1ffffff);
-+	{ u32 x64; u8/*bool*/ x65 = addcarryx_u25(x61, x29, x62, &x64);
-+	{ u32 x66 = (x49 & 0x3ffffff);
-+	{ u32 x68; u8/*bool*/ x69 = addcarryx_u26(x65, x32, x66, &x68);
-+	{ u32 x70 = (x49 & 0x1ffffff);
-+	{ u32 x72; u8/*bool*/ x73 = addcarryx_u25(x69, x35, x70, &x72);
-+	{ u32 x74 = (x49 & 0x3ffffff);
-+	{ u32 x76; u8/*bool*/ x77 = addcarryx_u26(x73, x38, x74, &x76);
-+	{ u32 x78 = (x49 & 0x1ffffff);
-+	{ u32 x80; u8/*bool*/ x81 = addcarryx_u25(x77, x41, x78, &x80);
-+	{ u32 x82 = (x49 & 0x3ffffff);
-+	{ u32 x84; u8/*bool*/ x85 = addcarryx_u26(x81, x44, x82, &x84);
-+	{ u32 x86 = (x49 & 0x1ffffff);
-+	{ u32 x88; addcarryx_u25(x85, x47, x86, &x88);
-+	out[0] = x52;
-+	out[1] = x56;
-+	out[2] = x60;
-+	out[3] = x64;
-+	out[4] = x68;
-+	out[5] = x72;
-+	out[6] = x76;
-+	out[7] = x80;
-+	out[8] = x84;
-+	out[9] = x88;
-+	}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}
-+}
-+
-+static __always_inline void fe_tobytes(u8 s[32], const fe *f)
-+{
-+	u32 h[10];
-+	fe_freeze(h, f->v);
-+	s[0] = h[0] >> 0;
-+	s[1] = h[0] >> 8;
-+	s[2] = h[0] >> 16;
-+	s[3] = (h[0] >> 24) | (h[1] << 2);
-+	s[4] = h[1] >> 6;
-+	s[5] = h[1] >> 14;
-+	s[6] = (h[1] >> 22) | (h[2] << 3);
-+	s[7] = h[2] >> 5;
-+	s[8] = h[2] >> 13;
-+	s[9] = (h[2] >> 21) | (h[3] << 5);
-+	s[10] = h[3] >> 3;
-+	s[11] = h[3] >> 11;
-+	s[12] = (h[3] >> 19) | (h[4] << 6);
-+	s[13] = h[4] >> 2;
-+	s[14] = h[4] >> 10;
-+	s[15] = h[4] >> 18;
-+	s[16] = h[5] >> 0;
-+	s[17] = h[5] >> 8;
-+	s[18] = h[5] >> 16;
-+	s[19] = (h[5] >> 24) | (h[6] << 1);
-+	s[20] = h[6] >> 7;
-+	s[21] = h[6] >> 15;
-+	s[22] = (h[6] >> 23) | (h[7] << 3);
-+	s[23] = h[7] >> 5;
-+	s[24] = h[7] >> 13;
-+	s[25] = (h[7] >> 21) | (h[8] << 4);
-+	s[26] = h[8] >> 4;
-+	s[27] = h[8] >> 12;
-+	s[28] = (h[8] >> 20) | (h[9] << 6);
-+	s[29] = h[9] >> 2;
-+	s[30] = h[9] >> 10;
-+	s[31] = h[9] >> 18;
-+}
-+
-+/* h = f */
-+static __always_inline void fe_copy(fe *h, const fe *f)
-+{
-+	memmove(h, f, sizeof(u32) * 10);
-+}
-+
-+static __always_inline void fe_copy_lt(fe_loose *h, const fe *f)
-+{
-+	memmove(h, f, sizeof(u32) * 10);
-+}
-+
-+/* h = 0 */
-+static __always_inline void fe_0(fe *h)
-+{
-+	memset(h, 0, sizeof(u32) * 10);
-+}
-+
-+/* h = 1 */
-+static __always_inline void fe_1(fe *h)
-+{
-+	memset(h, 0, sizeof(u32) * 10);
-+	h->v[0] = 1;
-+}
-+
-+static void fe_add_impl(u32 out[10], const u32 in1[10], const u32 in2[10])
-+{
-+	{ const u32 x20 = in1[9];
-+	{ const u32 x21 = in1[8];
-+	{ const u32 x19 = in1[7];
-+	{ const u32 x17 = in1[6];
-+	{ const u32 x15 = in1[5];
-+	{ const u32 x13 = in1[4];
-+	{ const u32 x11 = in1[3];
-+	{ const u32 x9 = in1[2];
-+	{ const u32 x7 = in1[1];
-+	{ const u32 x5 = in1[0];
-+	{ const u32 x38 = in2[9];
-+	{ const u32 x39 = in2[8];
-+	{ const u32 x37 = in2[7];
-+	{ const u32 x35 = in2[6];
-+	{ const u32 x33 = in2[5];
-+	{ const u32 x31 = in2[4];
-+	{ const u32 x29 = in2[3];
-+	{ const u32 x27 = in2[2];
-+	{ const u32 x25 = in2[1];
-+	{ const u32 x23 = in2[0];
-+	out[0] = (x5 + x23);
-+	out[1] = (x7 + x25);
-+	out[2] = (x9 + x27);
-+	out[3] = (x11 + x29);
-+	out[4] = (x13 + x31);
-+	out[5] = (x15 + x33);
-+	out[6] = (x17 + x35);
-+	out[7] = (x19 + x37);
-+	out[8] = (x21 + x39);
-+	out[9] = (x20 + x38);
-+	}}}}}}}}}}}}}}}}}}}}
-+}
-+
-+/* h = f + g
-+ * Can overlap h with f or g.
-+ */
-+static __always_inline void fe_add(fe_loose *h, const fe *f, const fe *g)
-+{
-+	fe_add_impl(h->v, f->v, g->v);
-+}
-+
-+static void fe_sub_impl(u32 out[10], const u32 in1[10], const u32 in2[10])
-+{
-+	{ const u32 x20 = in1[9];
-+	{ const u32 x21 = in1[8];
-+	{ const u32 x19 = in1[7];
-+	{ const u32 x17 = in1[6];
-+	{ const u32 x15 = in1[5];
-+	{ const u32 x13 = in1[4];
-+	{ const u32 x11 = in1[3];
-+	{ const u32 x9 = in1[2];
-+	{ const u32 x7 = in1[1];
-+	{ const u32 x5 = in1[0];
-+	{ const u32 x38 = in2[9];
-+	{ const u32 x39 = in2[8];
-+	{ const u32 x37 = in2[7];
-+	{ const u32 x35 = in2[6];
-+	{ const u32 x33 = in2[5];
-+	{ const u32 x31 = in2[4];
-+	{ const u32 x29 = in2[3];
-+	{ const u32 x27 = in2[2];
-+	{ const u32 x25 = in2[1];
-+	{ const u32 x23 = in2[0];
-+	out[0] = ((0x7ffffda + x5) - x23);
-+	out[1] = ((0x3fffffe + x7) - x25);
-+	out[2] = ((0x7fffffe + x9) - x27);
-+	out[3] = ((0x3fffffe + x11) - x29);
-+	out[4] = ((0x7fffffe + x13) - x31);
-+	out[5] = ((0x3fffffe + x15) - x33);
-+	out[6] = ((0x7fffffe + x17) - x35);
-+	out[7] = ((0x3fffffe + x19) - x37);
-+	out[8] = ((0x7fffffe + x21) - x39);
-+	out[9] = ((0x3fffffe + x20) - x38);
-+	}}}}}}}}}}}}}}}}}}}}
-+}
-+
-+/* h = f - g
-+ * Can overlap h with f or g.
-+ */
-+static __always_inline void fe_sub(fe_loose *h, const fe *f, const fe *g)
-+{
-+	fe_sub_impl(h->v, f->v, g->v);
-+}
-+
-+static void fe_mul_impl(u32 out[10], const u32 in1[10], const u32 in2[10])
-+{
-+	{ const u32 x20 = in1[9];
-+	{ const u32 x21 = in1[8];
-+	{ const u32 x19 = in1[7];
-+	{ const u32 x17 = in1[6];
-+	{ const u32 x15 = in1[5];
-+	{ const u32 x13 = in1[4];
-+	{ const u32 x11 = in1[3];
-+	{ const u32 x9 = in1[2];
-+	{ const u32 x7 = in1[1];
-+	{ const u32 x5 = in1[0];
-+	{ const u32 x38 = in2[9];
-+	{ const u32 x39 = in2[8];
-+	{ const u32 x37 = in2[7];
-+	{ const u32 x35 = in2[6];
-+	{ const u32 x33 = in2[5];
-+	{ const u32 x31 = in2[4];
-+	{ const u32 x29 = in2[3];
-+	{ const u32 x27 = in2[2];
-+	{ const u32 x25 = in2[1];
-+	{ const u32 x23 = in2[0];
-+	{ u64 x40 = ((u64)x23 * x5);
-+	{ u64 x41 = (((u64)x23 * x7) + ((u64)x25 * x5));
-+	{ u64 x42 = ((((u64)(0x2 * x25) * x7) + ((u64)x23 * x9)) + ((u64)x27 * x5));
-+	{ u64 x43 = (((((u64)x25 * x9) + ((u64)x27 * x7)) + ((u64)x23 * x11)) + ((u64)x29 * x5));
-+	{ u64 x44 = (((((u64)x27 * x9) + (0x2 * (((u64)x25 * x11) + ((u64)x29 * x7)))) + ((u64)x23 * x13)) + ((u64)x31 * x5));
-+	{ u64 x45 = (((((((u64)x27 * x11) + ((u64)x29 * x9)) + ((u64)x25 * x13)) + ((u64)x31 * x7)) + ((u64)x23 * x15)) + ((u64)x33 * x5));
-+	{ u64 x46 = (((((0x2 * ((((u64)x29 * x11) + ((u64)x25 * x15)) + ((u64)x33 * x7))) + ((u64)x27 * x13)) + ((u64)x31 * x9)) + ((u64)x23 * x17)) + ((u64)x35 * x5));
-+	{ u64 x47 = (((((((((u64)x29 * x13) + ((u64)x31 * x11)) + ((u64)x27 * x15)) + ((u64)x33 * x9)) + ((u64)x25 * x17)) + ((u64)x35 * x7)) + ((u64)x23 * x19)) + ((u64)x37 * x5));
-+	{ u64 x48 = (((((((u64)x31 * x13) + (0x2 * (((((u64)x29 * x15) + ((u64)x33 * x11)) + ((u64)x25 * x19)) + ((u64)x37 * x7)))) + ((u64)x27 * x17)) + ((u64)x35 * x9)) + ((u64)x23 * x21)) + ((u64)x39 * x5));
-+	{ u64 x49 = (((((((((((u64)x31 * x15) + ((u64)x33 * x13)) + ((u64)x29 * x17)) + ((u64)x35 * x11)) + ((u64)x27 * x19)) + ((u64)x37 * x9)) + ((u64)x25 * x21)) + ((u64)x39 * x7)) + ((u64)x23 * x20)) + ((u64)x38 * x5));
-+	{ u64 x50 = (((((0x2 * ((((((u64)x33 * x15) + ((u64)x29 * x19)) + ((u64)x37 * x11)) + ((u64)x25 * x20)) + ((u64)x38 * x7))) + ((u64)x31 * x17)) + ((u64)x35 * x13)) + ((u64)x27 * x21)) + ((u64)x39 * x9));
-+	{ u64 x51 = (((((((((u64)x33 * x17) + ((u64)x35 * x15)) + ((u64)x31 * x19)) + ((u64)x37 * x13)) + ((u64)x29 * x21)) + ((u64)x39 * x11)) + ((u64)x27 * x20)) + ((u64)x38 * x9));
-+	{ u64 x52 = (((((u64)x35 * x17) + (0x2 * (((((u64)x33 * x19) + ((u64)x37 * x15)) + ((u64)x29 * x20)) + ((u64)x38 * x11)))) + ((u64)x31 * x21)) + ((u64)x39 * x13));
-+	{ u64 x53 = (((((((u64)x35 * x19) + ((u64)x37 * x17)) + ((u64)x33 * x21)) + ((u64)x39 * x15)) + ((u64)x31 * x20)) + ((u64)x38 * x13));
-+	{ u64 x54 = (((0x2 * ((((u64)x37 * x19) + ((u64)x33 * x20)) + ((u64)x38 * x15))) + ((u64)x35 * x21)) + ((u64)x39 * x17));
-+	{ u64 x55 = (((((u64)x37 * x21) + ((u64)x39 * x19)) + ((u64)x35 * x20)) + ((u64)x38 * x17));
-+	{ u64 x56 = (((u64)x39 * x21) + (0x2 * (((u64)x37 * x20) + ((u64)x38 * x19))));
-+	{ u64 x57 = (((u64)x39 * x20) + ((u64)x38 * x21));
-+	{ u64 x58 = ((u64)(0x2 * x38) * x20);
-+	{ u64 x59 = (x48 + (x58 << 0x4));
-+	{ u64 x60 = (x59 + (x58 << 0x1));
-+	{ u64 x61 = (x60 + x58);
-+	{ u64 x62 = (x47 + (x57 << 0x4));
-+	{ u64 x63 = (x62 + (x57 << 0x1));
-+	{ u64 x64 = (x63 + x57);
-+	{ u64 x65 = (x46 + (x56 << 0x4));
-+	{ u64 x66 = (x65 + (x56 << 0x1));
-+	{ u64 x67 = (x66 + x56);
-+	{ u64 x68 = (x45 + (x55 << 0x4));
-+	{ u64 x69 = (x68 + (x55 << 0x1));
-+	{ u64 x70 = (x69 + x55);
-+	{ u64 x71 = (x44 + (x54 << 0x4));
-+	{ u64 x72 = (x71 + (x54 << 0x1));
-+	{ u64 x73 = (x72 + x54);
-+	{ u64 x74 = (x43 + (x53 << 0x4));
-+	{ u64 x75 = (x74 + (x53 << 0x1));
-+	{ u64 x76 = (x75 + x53);
-+	{ u64 x77 = (x42 + (x52 << 0x4));
-+	{ u64 x78 = (x77 + (x52 << 0x1));
-+	{ u64 x79 = (x78 + x52);
-+	{ u64 x80 = (x41 + (x51 << 0x4));
-+	{ u64 x81 = (x80 + (x51 << 0x1));
-+	{ u64 x82 = (x81 + x51);
-+	{ u64 x83 = (x40 + (x50 << 0x4));
-+	{ u64 x84 = (x83 + (x50 << 0x1));
-+	{ u64 x85 = (x84 + x50);
-+	{ u64 x86 = (x85 >> 0x1a);
-+	{ u32 x87 = ((u32)x85 & 0x3ffffff);
-+	{ u64 x88 = (x86 + x82);
-+	{ u64 x89 = (x88 >> 0x19);
-+	{ u32 x90 = ((u32)x88 & 0x1ffffff);
-+	{ u64 x91 = (x89 + x79);
-+	{ u64 x92 = (x91 >> 0x1a);
-+	{ u32 x93 = ((u32)x91 & 0x3ffffff);
-+	{ u64 x94 = (x92 + x76);
-+	{ u64 x95 = (x94 >> 0x19);
-+	{ u32 x96 = ((u32)x94 & 0x1ffffff);
-+	{ u64 x97 = (x95 + x73);
-+	{ u64 x98 = (x97 >> 0x1a);
-+	{ u32 x99 = ((u32)x97 & 0x3ffffff);
-+	{ u64 x100 = (x98 + x70);
-+	{ u64 x101 = (x100 >> 0x19);
-+	{ u32 x102 = ((u32)x100 & 0x1ffffff);
-+	{ u64 x103 = (x101 + x67);
-+	{ u64 x104 = (x103 >> 0x1a);
-+	{ u32 x105 = ((u32)x103 & 0x3ffffff);
-+	{ u64 x106 = (x104 + x64);
-+	{ u64 x107 = (x106 >> 0x19);
-+	{ u32 x108 = ((u32)x106 & 0x1ffffff);
-+	{ u64 x109 = (x107 + x61);
-+	{ u64 x110 = (x109 >> 0x1a);
-+	{ u32 x111 = ((u32)x109 & 0x3ffffff);
-+	{ u64 x112 = (x110 + x49);
-+	{ u64 x113 = (x112 >> 0x19);
-+	{ u32 x114 = ((u32)x112 & 0x1ffffff);
-+	{ u64 x115 = (x87 + (0x13 * x113));
-+	{ u32 x116 = (u32) (x115 >> 0x1a);
-+	{ u32 x117 = ((u32)x115 & 0x3ffffff);
-+	{ u32 x118 = (x116 + x90);
-+	{ u32 x119 = (x118 >> 0x19);
-+	{ u32 x120 = (x118 & 0x1ffffff);
-+	out[0] = x117;
-+	out[1] = x120;
-+	out[2] = (x119 + x93);
-+	out[3] = x96;
-+	out[4] = x99;
-+	out[5] = x102;
-+	out[6] = x105;
-+	out[7] = x108;
-+	out[8] = x111;
-+	out[9] = x114;
-+	}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}
-+}
-+
-+static __always_inline void fe_mul_ttt(fe *h, const fe *f, const fe *g)
-+{
-+	fe_mul_impl(h->v, f->v, g->v);
-+}
-+
-+static __always_inline void fe_mul_tlt(fe *h, const fe_loose *f, const fe *g)
-+{
-+	fe_mul_impl(h->v, f->v, g->v);
-+}
-+
-+static __always_inline void
-+fe_mul_tll(fe *h, const fe_loose *f, const fe_loose *g)
-+{
-+	fe_mul_impl(h->v, f->v, g->v);
-+}
-+
-+static void fe_sqr_impl(u32 out[10], const u32 in1[10])
-+{
-+	{ const u32 x17 = in1[9];
-+	{ const u32 x18 = in1[8];
-+	{ const u32 x16 = in1[7];
-+	{ const u32 x14 = in1[6];
-+	{ const u32 x12 = in1[5];
-+	{ const u32 x10 = in1[4];
-+	{ const u32 x8 = in1[3];
-+	{ const u32 x6 = in1[2];
-+	{ const u32 x4 = in1[1];
-+	{ const u32 x2 = in1[0];
-+	{ u64 x19 = ((u64)x2 * x2);
-+	{ u64 x20 = ((u64)(0x2 * x2) * x4);
-+	{ u64 x21 = (0x2 * (((u64)x4 * x4) + ((u64)x2 * x6)));
-+	{ u64 x22 = (0x2 * (((u64)x4 * x6) + ((u64)x2 * x8)));
-+	{ u64 x23 = ((((u64)x6 * x6) + ((u64)(0x4 * x4) * x8)) + ((u64)(0x2 * x2) * x10));
-+	{ u64 x24 = (0x2 * ((((u64)x6 * x8) + ((u64)x4 * x10)) + ((u64)x2 * x12)));
-+	{ u64 x25 = (0x2 * (((((u64)x8 * x8) + ((u64)x6 * x10)) + ((u64)x2 * x14)) + ((u64)(0x2 * x4) * x12)));
-+	{ u64 x26 = (0x2 * (((((u64)x8 * x10) + ((u64)x6 * x12)) + ((u64)x4 * x14)) + ((u64)x2 * x16)));
-+	{ u64 x27 = (((u64)x10 * x10) + (0x2 * ((((u64)x6 * x14) + ((u64)x2 * x18)) + (0x2 * (((u64)x4 * x16) + ((u64)x8 * x12))))));
-+	{ u64 x28 = (0x2 * ((((((u64)x10 * x12) + ((u64)x8 * x14)) + ((u64)x6 * x16)) + ((u64)x4 * x18)) + ((u64)x2 * x17)));
-+	{ u64 x29 = (0x2 * (((((u64)x12 * x12) + ((u64)x10 * x14)) + ((u64)x6 * x18)) + (0x2 * (((u64)x8 * x16) + ((u64)x4 * x17)))));
-+	{ u64 x30 = (0x2 * (((((u64)x12 * x14) + ((u64)x10 * x16)) + ((u64)x8 * x18)) + ((u64)x6 * x17)));
-+	{ u64 x31 = (((u64)x14 * x14) + (0x2 * (((u64)x10 * x18) + (0x2 * (((u64)x12 * x16) + ((u64)x8 * x17))))));
-+	{ u64 x32 = (0x2 * ((((u64)x14 * x16) + ((u64)x12 * x18)) + ((u64)x10 * x17)));
-+	{ u64 x33 = (0x2 * ((((u64)x16 * x16) + ((u64)x14 * x18)) + ((u64)(0x2 * x12) * x17)));
-+	{ u64 x34 = (0x2 * (((u64)x16 * x18) + ((u64)x14 * x17)));
-+	{ u64 x35 = (((u64)x18 * x18) + ((u64)(0x4 * x16) * x17));
-+	{ u64 x36 = ((u64)(0x2 * x18) * x17);
-+	{ u64 x37 = ((u64)(0x2 * x17) * x17);
-+	{ u64 x38 = (x27 + (x37 << 0x4));
-+	{ u64 x39 = (x38 + (x37 << 0x1));
-+	{ u64 x40 = (x39 + x37);
-+	{ u64 x41 = (x26 + (x36 << 0x4));
-+	{ u64 x42 = (x41 + (x36 << 0x1));
-+	{ u64 x43 = (x42 + x36);
-+	{ u64 x44 = (x25 + (x35 << 0x4));
-+	{ u64 x45 = (x44 + (x35 << 0x1));
-+	{ u64 x46 = (x45 + x35);
-+	{ u64 x47 = (x24 + (x34 << 0x4));
-+	{ u64 x48 = (x47 + (x34 << 0x1));
-+	{ u64 x49 = (x48 + x34);
-+	{ u64 x50 = (x23 + (x33 << 0x4));
-+	{ u64 x51 = (x50 + (x33 << 0x1));
-+	{ u64 x52 = (x51 + x33);
-+	{ u64 x53 = (x22 + (x32 << 0x4));
-+	{ u64 x54 = (x53 + (x32 << 0x1));
-+	{ u64 x55 = (x54 + x32);
-+	{ u64 x56 = (x21 + (x31 << 0x4));
-+	{ u64 x57 = (x56 + (x31 << 0x1));
-+	{ u64 x58 = (x57 + x31);
-+	{ u64 x59 = (x20 + (x30 << 0x4));
-+	{ u64 x60 = (x59 + (x30 << 0x1));
-+	{ u64 x61 = (x60 + x30);
-+	{ u64 x62 = (x19 + (x29 << 0x4));
-+	{ u64 x63 = (x62 + (x29 << 0x1));
-+	{ u64 x64 = (x63 + x29);
-+	{ u64 x65 = (x64 >> 0x1a);
-+	{ u32 x66 = ((u32)x64 & 0x3ffffff);
-+	{ u64 x67 = (x65 + x61);
-+	{ u64 x68 = (x67 >> 0x19);
-+	{ u32 x69 = ((u32)x67 & 0x1ffffff);
-+	{ u64 x70 = (x68 + x58);
-+	{ u64 x71 = (x70 >> 0x1a);
-+	{ u32 x72 = ((u32)x70 & 0x3ffffff);
-+	{ u64 x73 = (x71 + x55);
-+	{ u64 x74 = (x73 >> 0x19);
-+	{ u32 x75 = ((u32)x73 & 0x1ffffff);
-+	{ u64 x76 = (x74 + x52);
-+	{ u64 x77 = (x76 >> 0x1a);
-+	{ u32 x78 = ((u32)x76 & 0x3ffffff);
-+	{ u64 x79 = (x77 + x49);
-+	{ u64 x80 = (x79 >> 0x19);
-+	{ u32 x81 = ((u32)x79 & 0x1ffffff);
-+	{ u64 x82 = (x80 + x46);
-+	{ u64 x83 = (x82 >> 0x1a);
-+	{ u32 x84 = ((u32)x82 & 0x3ffffff);
-+	{ u64 x85 = (x83 + x43);
-+	{ u64 x86 = (x85 >> 0x19);
-+	{ u32 x87 = ((u32)x85 & 0x1ffffff);
-+	{ u64 x88 = (x86 + x40);
-+	{ u64 x89 = (x88 >> 0x1a);
-+	{ u32 x90 = ((u32)x88 & 0x3ffffff);
-+	{ u64 x91 = (x89 + x28);
-+	{ u64 x92 = (x91 >> 0x19);
-+	{ u32 x93 = ((u32)x91 & 0x1ffffff);
-+	{ u64 x94 = (x66 + (0x13 * x92));
-+	{ u32 x95 = (u32) (x94 >> 0x1a);
-+	{ u32 x96 = ((u32)x94 & 0x3ffffff);
-+	{ u32 x97 = (x95 + x69);
-+	{ u32 x98 = (x97 >> 0x19);
-+	{ u32 x99 = (x97 & 0x1ffffff);
-+	out[0] = x96;
-+	out[1] = x99;
-+	out[2] = (x98 + x72);
-+	out[3] = x75;
-+	out[4] = x78;
-+	out[5] = x81;
-+	out[6] = x84;
-+	out[7] = x87;
-+	out[8] = x90;
-+	out[9] = x93;
-+	}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}
-+}
-+
-+static __always_inline void fe_sq_tl(fe *h, const fe_loose *f)
-+{
-+	fe_sqr_impl(h->v, f->v);
-+}
-+
-+static __always_inline void fe_sq_tt(fe *h, const fe *f)
-+{
-+	fe_sqr_impl(h->v, f->v);
-+}
-+
-+static __always_inline void fe_loose_invert(fe *out, const fe_loose *z)
-+{
-+	fe t0;
-+	fe t1;
-+	fe t2;
-+	fe t3;
-+	int i;
-+
-+	fe_sq_tl(&t0, z);
-+	fe_sq_tt(&t1, &t0);
-+	for (i = 1; i < 2; ++i)
-+		fe_sq_tt(&t1, &t1);
-+	fe_mul_tlt(&t1, z, &t1);
-+	fe_mul_ttt(&t0, &t0, &t1);
-+	fe_sq_tt(&t2, &t0);
-+	fe_mul_ttt(&t1, &t1, &t2);
-+	fe_sq_tt(&t2, &t1);
-+	for (i = 1; i < 5; ++i)
-+		fe_sq_tt(&t2, &t2);
-+	fe_mul_ttt(&t1, &t2, &t1);
-+	fe_sq_tt(&t2, &t1);
-+	for (i = 1; i < 10; ++i)
-+		fe_sq_tt(&t2, &t2);
-+	fe_mul_ttt(&t2, &t2, &t1);
-+	fe_sq_tt(&t3, &t2);
-+	for (i = 1; i < 20; ++i)
-+		fe_sq_tt(&t3, &t3);
-+	fe_mul_ttt(&t2, &t3, &t2);
-+	fe_sq_tt(&t2, &t2);
-+	for (i = 1; i < 10; ++i)
-+		fe_sq_tt(&t2, &t2);
-+	fe_mul_ttt(&t1, &t2, &t1);
-+	fe_sq_tt(&t2, &t1);
-+	for (i = 1; i < 50; ++i)
-+		fe_sq_tt(&t2, &t2);
-+	fe_mul_ttt(&t2, &t2, &t1);
-+	fe_sq_tt(&t3, &t2);
-+	for (i = 1; i < 100; ++i)
-+		fe_sq_tt(&t3, &t3);
-+	fe_mul_ttt(&t2, &t3, &t2);
-+	fe_sq_tt(&t2, &t2);
-+	for (i = 1; i < 50; ++i)
-+		fe_sq_tt(&t2, &t2);
-+	fe_mul_ttt(&t1, &t2, &t1);
-+	fe_sq_tt(&t1, &t1);
-+	for (i = 1; i < 5; ++i)
-+		fe_sq_tt(&t1, &t1);
-+	fe_mul_ttt(out, &t1, &t0);
-+}
-+
-+static __always_inline void fe_invert(fe *out, const fe *z)
-+{
-+	fe_loose l;
-+	fe_copy_lt(&l, z);
-+	fe_loose_invert(out, &l);
-+}
-+
-+/* Replace (f,g) with (g,f) if b == 1;
-+ * replace (f,g) with (f,g) if b == 0.
-+ *
-+ * Preconditions: b in {0,1}
-+ */
-+static __always_inline void fe_cswap(fe *f, fe *g, unsigned int b)
-+{
-+	unsigned i;
-+	b = 0 - b;
-+	for (i = 0; i < 10; i++) {
-+		u32 x = f->v[i] ^ g->v[i];
-+		x &= b;
-+		f->v[i] ^= x;
-+		g->v[i] ^= x;
-+	}
-+}
-+
-+/* NOTE: based on fiat-crypto fe_mul, edited for in2=121666, 0, 0.*/
-+static __always_inline void fe_mul_121666_impl(u32 out[10], const u32 in1[10])
-+{
-+	{ const u32 x20 = in1[9];
-+	{ const u32 x21 = in1[8];
-+	{ const u32 x19 = in1[7];
-+	{ const u32 x17 = in1[6];
-+	{ const u32 x15 = in1[5];
-+	{ const u32 x13 = in1[4];
-+	{ const u32 x11 = in1[3];
-+	{ const u32 x9 = in1[2];
-+	{ const u32 x7 = in1[1];
-+	{ const u32 x5 = in1[0];
-+	{ const u32 x38 = 0;
-+	{ const u32 x39 = 0;
-+	{ const u32 x37 = 0;
-+	{ const u32 x35 = 0;
-+	{ const u32 x33 = 0;
-+	{ const u32 x31 = 0;
-+	{ const u32 x29 = 0;
-+	{ const u32 x27 = 0;
-+	{ const u32 x25 = 0;
-+	{ const u32 x23 = 121666;
-+	{ u64 x40 = ((u64)x23 * x5);
-+	{ u64 x41 = (((u64)x23 * x7) + ((u64)x25 * x5));
-+	{ u64 x42 = ((((u64)(0x2 * x25) * x7) + ((u64)x23 * x9)) + ((u64)x27 * x5));
-+	{ u64 x43 = (((((u64)x25 * x9) + ((u64)x27 * x7)) + ((u64)x23 * x11)) + ((u64)x29 * x5));
-+	{ u64 x44 = (((((u64)x27 * x9) + (0x2 * (((u64)x25 * x11) + ((u64)x29 * x7)))) + ((u64)x23 * x13)) + ((u64)x31 * x5));
-+	{ u64 x45 = (((((((u64)x27 * x11) + ((u64)x29 * x9)) + ((u64)x25 * x13)) + ((u64)x31 * x7)) + ((u64)x23 * x15)) + ((u64)x33 * x5));
-+	{ u64 x46 = (((((0x2 * ((((u64)x29 * x11) + ((u64)x25 * x15)) + ((u64)x33 * x7))) + ((u64)x27 * x13)) + ((u64)x31 * x9)) + ((u64)x23 * x17)) + ((u64)x35 * x5));
-+	{ u64 x47 = (((((((((u64)x29 * x13) + ((u64)x31 * x11)) + ((u64)x27 * x15)) + ((u64)x33 * x9)) + ((u64)x25 * x17)) + ((u64)x35 * x7)) + ((u64)x23 * x19)) + ((u64)x37 * x5));
-+	{ u64 x48 = (((((((u64)x31 * x13) + (0x2 * (((((u64)x29 * x15) + ((u64)x33 * x11)) + ((u64)x25 * x19)) + ((u64)x37 * x7)))) + ((u64)x27 * x17)) + ((u64)x35 * x9)) + ((u64)x23 * x21)) + ((u64)x39 * x5));
-+	{ u64 x49 = (((((((((((u64)x31 * x15) + ((u64)x33 * x13)) + ((u64)x29 * x17)) + ((u64)x35 * x11)) + ((u64)x27 * x19)) + ((u64)x37 * x9)) + ((u64)x25 * x21)) + ((u64)x39 * x7)) + ((u64)x23 * x20)) + ((u64)x38 * x5));
-+	{ u64 x50 = (((((0x2 * ((((((u64)x33 * x15) + ((u64)x29 * x19)) + ((u64)x37 * x11)) + ((u64)x25 * x20)) + ((u64)x38 * x7))) + ((u64)x31 * x17)) + ((u64)x35 * x13)) + ((u64)x27 * x21)) + ((u64)x39 * x9));
-+	{ u64 x51 = (((((((((u64)x33 * x17) + ((u64)x35 * x15)) + ((u64)x31 * x19)) + ((u64)x37 * x13)) + ((u64)x29 * x21)) + ((u64)x39 * x11)) + ((u64)x27 * x20)) + ((u64)x38 * x9));
-+	{ u64 x52 = (((((u64)x35 * x17) + (0x2 * (((((u64)x33 * x19) + ((u64)x37 * x15)) + ((u64)x29 * x20)) + ((u64)x38 * x11)))) + ((u64)x31 * x21)) + ((u64)x39 * x13));
-+	{ u64 x53 = (((((((u64)x35 * x19) + ((u64)x37 * x17)) + ((u64)x33 * x21)) + ((u64)x39 * x15)) + ((u64)x31 * x20)) + ((u64)x38 * x13));
-+	{ u64 x54 = (((0x2 * ((((u64)x37 * x19) + ((u64)x33 * x20)) + ((u64)x38 * x15))) + ((u64)x35 * x21)) + ((u64)x39 * x17));
-+	{ u64 x55 = (((((u64)x37 * x21) + ((u64)x39 * x19)) + ((u64)x35 * x20)) + ((u64)x38 * x17));
-+	{ u64 x56 = (((u64)x39 * x21) + (0x2 * (((u64)x37 * x20) + ((u64)x38 * x19))));
-+	{ u64 x57 = (((u64)x39 * x20) + ((u64)x38 * x21));
-+	{ u64 x58 = ((u64)(0x2 * x38) * x20);
-+	{ u64 x59 = (x48 + (x58 << 0x4));
-+	{ u64 x60 = (x59 + (x58 << 0x1));
-+	{ u64 x61 = (x60 + x58);
-+	{ u64 x62 = (x47 + (x57 << 0x4));
-+	{ u64 x63 = (x62 + (x57 << 0x1));
-+	{ u64 x64 = (x63 + x57);
-+	{ u64 x65 = (x46 + (x56 << 0x4));
-+	{ u64 x66 = (x65 + (x56 << 0x1));
-+	{ u64 x67 = (x66 + x56);
-+	{ u64 x68 = (x45 + (x55 << 0x4));
-+	{ u64 x69 = (x68 + (x55 << 0x1));
-+	{ u64 x70 = (x69 + x55);
-+	{ u64 x71 = (x44 + (x54 << 0x4));
-+	{ u64 x72 = (x71 + (x54 << 0x1));
-+	{ u64 x73 = (x72 + x54);
-+	{ u64 x74 = (x43 + (x53 << 0x4));
-+	{ u64 x75 = (x74 + (x53 << 0x1));
-+	{ u64 x76 = (x75 + x53);
-+	{ u64 x77 = (x42 + (x52 << 0x4));
-+	{ u64 x78 = (x77 + (x52 << 0x1));
-+	{ u64 x79 = (x78 + x52);
-+	{ u64 x80 = (x41 + (x51 << 0x4));
-+	{ u64 x81 = (x80 + (x51 << 0x1));
-+	{ u64 x82 = (x81 + x51);
-+	{ u64 x83 = (x40 + (x50 << 0x4));
-+	{ u64 x84 = (x83 + (x50 << 0x1));
-+	{ u64 x85 = (x84 + x50);
-+	{ u64 x86 = (x85 >> 0x1a);
-+	{ u32 x87 = ((u32)x85 & 0x3ffffff);
-+	{ u64 x88 = (x86 + x82);
-+	{ u64 x89 = (x88 >> 0x19);
-+	{ u32 x90 = ((u32)x88 & 0x1ffffff);
-+	{ u64 x91 = (x89 + x79);
-+	{ u64 x92 = (x91 >> 0x1a);
-+	{ u32 x93 = ((u32)x91 & 0x3ffffff);
-+	{ u64 x94 = (x92 + x76);
-+	{ u64 x95 = (x94 >> 0x19);
-+	{ u32 x96 = ((u32)x94 & 0x1ffffff);
-+	{ u64 x97 = (x95 + x73);
-+	{ u64 x98 = (x97 >> 0x1a);
-+	{ u32 x99 = ((u32)x97 & 0x3ffffff);
-+	{ u64 x100 = (x98 + x70);
-+	{ u64 x101 = (x100 >> 0x19);
-+	{ u32 x102 = ((u32)x100 & 0x1ffffff);
-+	{ u64 x103 = (x101 + x67);
-+	{ u64 x104 = (x103 >> 0x1a);
-+	{ u32 x105 = ((u32)x103 & 0x3ffffff);
-+	{ u64 x106 = (x104 + x64);
-+	{ u64 x107 = (x106 >> 0x19);
-+	{ u32 x108 = ((u32)x106 & 0x1ffffff);
-+	{ u64 x109 = (x107 + x61);
-+	{ u64 x110 = (x109 >> 0x1a);
-+	{ u32 x111 = ((u32)x109 & 0x3ffffff);
-+	{ u64 x112 = (x110 + x49);
-+	{ u64 x113 = (x112 >> 0x19);
-+	{ u32 x114 = ((u32)x112 & 0x1ffffff);
-+	{ u64 x115 = (x87 + (0x13 * x113));
-+	{ u32 x116 = (u32) (x115 >> 0x1a);
-+	{ u32 x117 = ((u32)x115 & 0x3ffffff);
-+	{ u32 x118 = (x116 + x90);
-+	{ u32 x119 = (x118 >> 0x19);
-+	{ u32 x120 = (x118 & 0x1ffffff);
-+	out[0] = x117;
-+	out[1] = x120;
-+	out[2] = (x119 + x93);
-+	out[3] = x96;
-+	out[4] = x99;
-+	out[5] = x102;
-+	out[6] = x105;
-+	out[7] = x108;
-+	out[8] = x111;
-+	out[9] = x114;
-+	}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}
-+}
-+
-+static __always_inline void fe_mul121666(fe *h, const fe_loose *f)
-+{
-+	fe_mul_121666_impl(h->v, f->v);
-+}
-+
-+void curve25519_generic(u8 out[CURVE25519_KEY_SIZE],
-+			const u8 scalar[CURVE25519_KEY_SIZE],
-+			const u8 point[CURVE25519_KEY_SIZE])
-+{
-+	fe x1, x2, z2, x3, z3;
-+	fe_loose x2l, z2l, x3l;
-+	unsigned swap = 0;
-+	int pos;
-+	u8 e[32];
-+
-+	memcpy(e, scalar, 32);
-+	curve25519_clamp_secret(e);
-+
-+	/* The following implementation was transcribed to Coq and proven to
-+	 * correspond to unary scalar multiplication in affine coordinates given
-+	 * that x1 != 0 is the x coordinate of some point on the curve. It was
-+	 * also checked in Coq that doing a ladderstep with x1 = x3 = 0 gives
-+	 * z2' = z3' = 0, and z2 = z3 = 0 gives z2' = z3' = 0. The statement was
-+	 * quantified over the underlying field, so it applies to Curve25519
-+	 * itself and the quadratic twist of Curve25519. It was not proven in
-+	 * Coq that prime-field arithmetic correctly simulates extension-field
-+	 * arithmetic on prime-field values. The decoding of the byte array
-+	 * representation of e was not considered.
-+	 *
-+	 * Specification of Montgomery curves in affine coordinates:
-+	 * <https://github.com/mit-plv/fiat-crypto/blob/2456d821825521f7e03e65882cc3521795b0320f/src/Spec/MontgomeryCurve.v#L27>
-+	 *
-+	 * Proof that these form a group that is isomorphic to a Weierstrass
-+	 * curve:
-+	 * <https://github.com/mit-plv/fiat-crypto/blob/2456d821825521f7e03e65882cc3521795b0320f/src/Curves/Montgomery/AffineProofs.v#L35>
-+	 *
-+	 * Coq transcription and correctness proof of the loop
-+	 * (where scalarbits=255):
-+	 * <https://github.com/mit-plv/fiat-crypto/blob/2456d821825521f7e03e65882cc3521795b0320f/src/Curves/Montgomery/XZ.v#L118>
-+	 * <https://github.com/mit-plv/fiat-crypto/blob/2456d821825521f7e03e65882cc3521795b0320f/src/Curves/Montgomery/XZProofs.v#L278>
-+	 * preconditions: 0 <= e < 2^255 (not necessarily e < order),
-+	 * fe_invert(0) = 0
-+	 */
-+	fe_frombytes(&x1, point);
-+	fe_1(&x2);
-+	fe_0(&z2);
-+	fe_copy(&x3, &x1);
-+	fe_1(&z3);
-+
-+	for (pos = 254; pos >= 0; --pos) {
-+		fe tmp0, tmp1;
-+		fe_loose tmp0l, tmp1l;
-+		/* loop invariant as of right before the test, for the case
-+		 * where x1 != 0:
-+		 *   pos >= -1; if z2 = 0 then x2 is nonzero; if z3 = 0 then x3
-+		 *   is nonzero
-+		 *   let r := e >> (pos+1) in the following equalities of
-+		 *   projective points:
-+		 *   to_xz (r*P)     === if swap then (x3, z3) else (x2, z2)
-+		 *   to_xz ((r+1)*P) === if swap then (x2, z2) else (x3, z3)
-+		 *   x1 is the nonzero x coordinate of the nonzero
-+		 *   point (r*P-(r+1)*P)
-+		 */
-+		unsigned b = 1 & (e[pos / 8] >> (pos & 7));
-+		swap ^= b;
-+		fe_cswap(&x2, &x3, swap);
-+		fe_cswap(&z2, &z3, swap);
-+		swap = b;
-+		/* Coq transcription of ladderstep formula (called from
-+		 * transcribed loop):
-+		 * <https://github.com/mit-plv/fiat-crypto/blob/2456d821825521f7e03e65882cc3521795b0320f/src/Curves/Montgomery/XZ.v#L89>
-+		 * <https://github.com/mit-plv/fiat-crypto/blob/2456d821825521f7e03e65882cc3521795b0320f/src/Curves/Montgomery/XZProofs.v#L131>
-+		 * x1 != 0 <https://github.com/mit-plv/fiat-crypto/blob/2456d821825521f7e03e65882cc3521795b0320f/src/Curves/Montgomery/XZProofs.v#L217>
-+		 * x1  = 0 <https://github.com/mit-plv/fiat-crypto/blob/2456d821825521f7e03e65882cc3521795b0320f/src/Curves/Montgomery/XZProofs.v#L147>
-+		 */
-+		fe_sub(&tmp0l, &x3, &z3);
-+		fe_sub(&tmp1l, &x2, &z2);
-+		fe_add(&x2l, &x2, &z2);
-+		fe_add(&z2l, &x3, &z3);
-+		fe_mul_tll(&z3, &tmp0l, &x2l);
-+		fe_mul_tll(&z2, &z2l, &tmp1l);
-+		fe_sq_tl(&tmp0, &tmp1l);
-+		fe_sq_tl(&tmp1, &x2l);
-+		fe_add(&x3l, &z3, &z2);
-+		fe_sub(&z2l, &z3, &z2);
-+		fe_mul_ttt(&x2, &tmp1, &tmp0);
-+		fe_sub(&tmp1l, &tmp1, &tmp0);
-+		fe_sq_tl(&z2, &z2l);
-+		fe_mul121666(&z3, &tmp1l);
-+		fe_sq_tl(&x3, &x3l);
-+		fe_add(&tmp0l, &tmp0, &z3);
-+		fe_mul_ttt(&z3, &x1, &z2);
-+		fe_mul_tll(&z2, &tmp1l, &tmp0l);
-+	}
-+	/* here pos=-1, so r=e, so to_xz (e*P) === if swap then (x3, z3)
-+	 * else (x2, z2)
-+	 */
-+	fe_cswap(&x2, &x3, swap);
-+	fe_cswap(&z2, &z3, swap);
-+
-+	fe_invert(&z2, &z2);
-+	fe_mul_ttt(&x2, &x2, &z2);
-+	fe_tobytes(out, &x2);
-+
-+	memzero_explicit(&x1, sizeof(x1));
-+	memzero_explicit(&x2, sizeof(x2));
-+	memzero_explicit(&z2, sizeof(z2));
-+	memzero_explicit(&x3, sizeof(x3));
-+	memzero_explicit(&z3, sizeof(z3));
-+	memzero_explicit(&x2l, sizeof(x2l));
-+	memzero_explicit(&z2l, sizeof(z2l));
-+	memzero_explicit(&x3l, sizeof(x3l));
-+	memzero_explicit(&e, sizeof(e));
-+}
---- /dev/null
-+++ b/lib/crypto/curve25519-hacl64.c
-@@ -0,0 +1,788 @@
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
-+/*
-+ * Copyright (C) 2016-2017 INRIA and Microsoft Corporation.
-+ * Copyright (C) 2018-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ *
-+ * This is a machine-generated formally verified implementation of Curve25519
-+ * ECDH from: <https://github.com/mitls/hacl-star>. Though originally machine
-+ * generated, it has been tweaked to be suitable for use in the kernel. It is
-+ * optimized for 64-bit machines that can efficiently work with 128-bit
-+ * integer types.
-+ */
-+
-+#include <asm/unaligned.h>
-+#include <crypto/curve25519.h>
-+#include <linux/string.h>
-+
-+typedef __uint128_t u128;
-+
-+static __always_inline u64 u64_eq_mask(u64 a, u64 b)
-+{
-+	u64 x = a ^ b;
-+	u64 minus_x = ~x + (u64)1U;
-+	u64 x_or_minus_x = x | minus_x;
-+	u64 xnx = x_or_minus_x >> (u32)63U;
-+	u64 c = xnx - (u64)1U;
-+	return c;
-+}
-+
-+static __always_inline u64 u64_gte_mask(u64 a, u64 b)
-+{
-+	u64 x = a;
-+	u64 y = b;
-+	u64 x_xor_y = x ^ y;
-+	u64 x_sub_y = x - y;
-+	u64 x_sub_y_xor_y = x_sub_y ^ y;
-+	u64 q = x_xor_y | x_sub_y_xor_y;
-+	u64 x_xor_q = x ^ q;
-+	u64 x_xor_q_ = x_xor_q >> (u32)63U;
-+	u64 c = x_xor_q_ - (u64)1U;
-+	return c;
-+}
-+
-+static __always_inline void modulo_carry_top(u64 *b)
-+{
-+	u64 b4 = b[4];
-+	u64 b0 = b[0];
-+	u64 b4_ = b4 & 0x7ffffffffffffLLU;
-+	u64 b0_ = b0 + 19 * (b4 >> 51);
-+	b[4] = b4_;
-+	b[0] = b0_;
-+}
-+
-+static __always_inline void fproduct_copy_from_wide_(u64 *output, u128 *input)
-+{
-+	{
-+		u128 xi = input[0];
-+		output[0] = ((u64)(xi));
-+	}
-+	{
-+		u128 xi = input[1];
-+		output[1] = ((u64)(xi));
-+	}
-+	{
-+		u128 xi = input[2];
-+		output[2] = ((u64)(xi));
-+	}
-+	{
-+		u128 xi = input[3];
-+		output[3] = ((u64)(xi));
-+	}
-+	{
-+		u128 xi = input[4];
-+		output[4] = ((u64)(xi));
-+	}
-+}
-+
-+static __always_inline void
-+fproduct_sum_scalar_multiplication_(u128 *output, u64 *input, u64 s)
-+{
-+	output[0] += (u128)input[0] * s;
-+	output[1] += (u128)input[1] * s;
-+	output[2] += (u128)input[2] * s;
-+	output[3] += (u128)input[3] * s;
-+	output[4] += (u128)input[4] * s;
-+}
-+
-+static __always_inline void fproduct_carry_wide_(u128 *tmp)
-+{
-+	{
-+		u32 ctr = 0;
-+		u128 tctr = tmp[ctr];
-+		u128 tctrp1 = tmp[ctr + 1];
-+		u64 r0 = ((u64)(tctr)) & 0x7ffffffffffffLLU;
-+		u128 c = ((tctr) >> (51));
-+		tmp[ctr] = ((u128)(r0));
-+		tmp[ctr + 1] = ((tctrp1) + (c));
-+	}
-+	{
-+		u32 ctr = 1;
-+		u128 tctr = tmp[ctr];
-+		u128 tctrp1 = tmp[ctr + 1];
-+		u64 r0 = ((u64)(tctr)) & 0x7ffffffffffffLLU;
-+		u128 c = ((tctr) >> (51));
-+		tmp[ctr] = ((u128)(r0));
-+		tmp[ctr + 1] = ((tctrp1) + (c));
-+	}
-+
-+	{
-+		u32 ctr = 2;
-+		u128 tctr = tmp[ctr];
-+		u128 tctrp1 = tmp[ctr + 1];
-+		u64 r0 = ((u64)(tctr)) & 0x7ffffffffffffLLU;
-+		u128 c = ((tctr) >> (51));
-+		tmp[ctr] = ((u128)(r0));
-+		tmp[ctr + 1] = ((tctrp1) + (c));
-+	}
-+	{
-+		u32 ctr = 3;
-+		u128 tctr = tmp[ctr];
-+		u128 tctrp1 = tmp[ctr + 1];
-+		u64 r0 = ((u64)(tctr)) & 0x7ffffffffffffLLU;
-+		u128 c = ((tctr) >> (51));
-+		tmp[ctr] = ((u128)(r0));
-+		tmp[ctr + 1] = ((tctrp1) + (c));
-+	}
-+}
-+
-+static __always_inline void fmul_shift_reduce(u64 *output)
-+{
-+	u64 tmp = output[4];
-+	u64 b0;
-+	{
-+		u32 ctr = 5 - 0 - 1;
-+		u64 z = output[ctr - 1];
-+		output[ctr] = z;
-+	}
-+	{
-+		u32 ctr = 5 - 1 - 1;
-+		u64 z = output[ctr - 1];
-+		output[ctr] = z;
-+	}
-+	{
-+		u32 ctr = 5 - 2 - 1;
-+		u64 z = output[ctr - 1];
-+		output[ctr] = z;
-+	}
-+	{
-+		u32 ctr = 5 - 3 - 1;
-+		u64 z = output[ctr - 1];
-+		output[ctr] = z;
-+	}
-+	output[0] = tmp;
-+	b0 = output[0];
-+	output[0] = 19 * b0;
-+}
-+
-+static __always_inline void fmul_mul_shift_reduce_(u128 *output, u64 *input,
-+						   u64 *input21)
-+{
-+	u32 i;
-+	u64 input2i;
-+	{
-+		u64 input2i = input21[0];
-+		fproduct_sum_scalar_multiplication_(output, input, input2i);
-+		fmul_shift_reduce(input);
-+	}
-+	{
-+		u64 input2i = input21[1];
-+		fproduct_sum_scalar_multiplication_(output, input, input2i);
-+		fmul_shift_reduce(input);
-+	}
-+	{
-+		u64 input2i = input21[2];
-+		fproduct_sum_scalar_multiplication_(output, input, input2i);
-+		fmul_shift_reduce(input);
-+	}
-+	{
-+		u64 input2i = input21[3];
-+		fproduct_sum_scalar_multiplication_(output, input, input2i);
-+		fmul_shift_reduce(input);
-+	}
-+	i = 4;
-+	input2i = input21[i];
-+	fproduct_sum_scalar_multiplication_(output, input, input2i);
-+}
-+
-+static __always_inline void fmul_fmul(u64 *output, u64 *input, u64 *input21)
-+{
-+	u64 tmp[5] = { input[0], input[1], input[2], input[3], input[4] };
-+	{
-+		u128 b4;
-+		u128 b0;
-+		u128 b4_;
-+		u128 b0_;
-+		u64 i0;
-+		u64 i1;
-+		u64 i0_;
-+		u64 i1_;
-+		u128 t[5] = { 0 };
-+		fmul_mul_shift_reduce_(t, tmp, input21);
-+		fproduct_carry_wide_(t);
-+		b4 = t[4];
-+		b0 = t[0];
-+		b4_ = ((b4) & (((u128)(0x7ffffffffffffLLU))));
-+		b0_ = ((b0) + (((u128)(19) * (((u64)(((b4) >> (51))))))));
-+		t[4] = b4_;
-+		t[0] = b0_;
-+		fproduct_copy_from_wide_(output, t);
-+		i0 = output[0];
-+		i1 = output[1];
-+		i0_ = i0 & 0x7ffffffffffffLLU;
-+		i1_ = i1 + (i0 >> 51);
-+		output[0] = i0_;
-+		output[1] = i1_;
-+	}
-+}
-+
-+static __always_inline void fsquare_fsquare__(u128 *tmp, u64 *output)
-+{
-+	u64 r0 = output[0];
-+	u64 r1 = output[1];
-+	u64 r2 = output[2];
-+	u64 r3 = output[3];
-+	u64 r4 = output[4];
-+	u64 d0 = r0 * 2;
-+	u64 d1 = r1 * 2;
-+	u64 d2 = r2 * 2 * 19;
-+	u64 d419 = r4 * 19;
-+	u64 d4 = d419 * 2;
-+	u128 s0 = ((((((u128)(r0) * (r0))) + (((u128)(d4) * (r1))))) +
-+		   (((u128)(d2) * (r3))));
-+	u128 s1 = ((((((u128)(d0) * (r1))) + (((u128)(d4) * (r2))))) +
-+		   (((u128)(r3 * 19) * (r3))));
-+	u128 s2 = ((((((u128)(d0) * (r2))) + (((u128)(r1) * (r1))))) +
-+		   (((u128)(d4) * (r3))));
-+	u128 s3 = ((((((u128)(d0) * (r3))) + (((u128)(d1) * (r2))))) +
-+		   (((u128)(r4) * (d419))));
-+	u128 s4 = ((((((u128)(d0) * (r4))) + (((u128)(d1) * (r3))))) +
-+		   (((u128)(r2) * (r2))));
-+	tmp[0] = s0;
-+	tmp[1] = s1;
-+	tmp[2] = s2;
-+	tmp[3] = s3;
-+	tmp[4] = s4;
-+}
-+
-+static __always_inline void fsquare_fsquare_(u128 *tmp, u64 *output)
-+{
-+	u128 b4;
-+	u128 b0;
-+	u128 b4_;
-+	u128 b0_;
-+	u64 i0;
-+	u64 i1;
-+	u64 i0_;
-+	u64 i1_;
-+	fsquare_fsquare__(tmp, output);
-+	fproduct_carry_wide_(tmp);
-+	b4 = tmp[4];
-+	b0 = tmp[0];
-+	b4_ = ((b4) & (((u128)(0x7ffffffffffffLLU))));
-+	b0_ = ((b0) + (((u128)(19) * (((u64)(((b4) >> (51))))))));
-+	tmp[4] = b4_;
-+	tmp[0] = b0_;
-+	fproduct_copy_from_wide_(output, tmp);
-+	i0 = output[0];
-+	i1 = output[1];
-+	i0_ = i0 & 0x7ffffffffffffLLU;
-+	i1_ = i1 + (i0 >> 51);
-+	output[0] = i0_;
-+	output[1] = i1_;
-+}
-+
-+static __always_inline void fsquare_fsquare_times_(u64 *output, u128 *tmp,
-+						   u32 count1)
-+{
-+	u32 i;
-+	fsquare_fsquare_(tmp, output);
-+	for (i = 1; i < count1; ++i)
-+		fsquare_fsquare_(tmp, output);
-+}
-+
-+static __always_inline void fsquare_fsquare_times(u64 *output, u64 *input,
-+						  u32 count1)
-+{
-+	u128 t[5];
-+	memcpy(output, input, 5 * sizeof(*input));
-+	fsquare_fsquare_times_(output, t, count1);
-+}
-+
-+static __always_inline void fsquare_fsquare_times_inplace(u64 *output,
-+							  u32 count1)
-+{
-+	u128 t[5];
-+	fsquare_fsquare_times_(output, t, count1);
-+}
-+
-+static __always_inline void crecip_crecip(u64 *out, u64 *z)
-+{
-+	u64 buf[20] = { 0 };
-+	u64 *a0 = buf;
-+	u64 *t00 = buf + 5;
-+	u64 *b0 = buf + 10;
-+	u64 *t01;
-+	u64 *b1;
-+	u64 *c0;
-+	u64 *a;
-+	u64 *t0;
-+	u64 *b;
-+	u64 *c;
-+	fsquare_fsquare_times(a0, z, 1);
-+	fsquare_fsquare_times(t00, a0, 2);
-+	fmul_fmul(b0, t00, z);
-+	fmul_fmul(a0, b0, a0);
-+	fsquare_fsquare_times(t00, a0, 1);
-+	fmul_fmul(b0, t00, b0);
-+	fsquare_fsquare_times(t00, b0, 5);
-+	t01 = buf + 5;
-+	b1 = buf + 10;
-+	c0 = buf + 15;
-+	fmul_fmul(b1, t01, b1);
-+	fsquare_fsquare_times(t01, b1, 10);
-+	fmul_fmul(c0, t01, b1);
-+	fsquare_fsquare_times(t01, c0, 20);
-+	fmul_fmul(t01, t01, c0);
-+	fsquare_fsquare_times_inplace(t01, 10);
-+	fmul_fmul(b1, t01, b1);
-+	fsquare_fsquare_times(t01, b1, 50);
-+	a = buf;
-+	t0 = buf + 5;
-+	b = buf + 10;
-+	c = buf + 15;
-+	fmul_fmul(c, t0, b);
-+	fsquare_fsquare_times(t0, c, 100);
-+	fmul_fmul(t0, t0, c);
-+	fsquare_fsquare_times_inplace(t0, 50);
-+	fmul_fmul(t0, t0, b);
-+	fsquare_fsquare_times_inplace(t0, 5);
-+	fmul_fmul(out, t0, a);
-+}
-+
-+static __always_inline void fsum(u64 *a, u64 *b)
-+{
-+	a[0] += b[0];
-+	a[1] += b[1];
-+	a[2] += b[2];
-+	a[3] += b[3];
-+	a[4] += b[4];
-+}
-+
-+static __always_inline void fdifference(u64 *a, u64 *b)
-+{
-+	u64 tmp[5] = { 0 };
-+	u64 b0;
-+	u64 b1;
-+	u64 b2;
-+	u64 b3;
-+	u64 b4;
-+	memcpy(tmp, b, 5 * sizeof(*b));
-+	b0 = tmp[0];
-+	b1 = tmp[1];
-+	b2 = tmp[2];
-+	b3 = tmp[3];
-+	b4 = tmp[4];
-+	tmp[0] = b0 + 0x3fffffffffff68LLU;
-+	tmp[1] = b1 + 0x3ffffffffffff8LLU;
-+	tmp[2] = b2 + 0x3ffffffffffff8LLU;
-+	tmp[3] = b3 + 0x3ffffffffffff8LLU;
-+	tmp[4] = b4 + 0x3ffffffffffff8LLU;
-+	{
-+		u64 xi = a[0];
-+		u64 yi = tmp[0];
-+		a[0] = yi - xi;
-+	}
-+	{
-+		u64 xi = a[1];
-+		u64 yi = tmp[1];
-+		a[1] = yi - xi;
-+	}
-+	{
-+		u64 xi = a[2];
-+		u64 yi = tmp[2];
-+		a[2] = yi - xi;
-+	}
-+	{
-+		u64 xi = a[3];
-+		u64 yi = tmp[3];
-+		a[3] = yi - xi;
-+	}
-+	{
-+		u64 xi = a[4];
-+		u64 yi = tmp[4];
-+		a[4] = yi - xi;
-+	}
-+}
-+
-+static __always_inline void fscalar(u64 *output, u64 *b, u64 s)
-+{
-+	u128 tmp[5];
-+	u128 b4;
-+	u128 b0;
-+	u128 b4_;
-+	u128 b0_;
-+	{
-+		u64 xi = b[0];
-+		tmp[0] = ((u128)(xi) * (s));
-+	}
-+	{
-+		u64 xi = b[1];
-+		tmp[1] = ((u128)(xi) * (s));
-+	}
-+	{
-+		u64 xi = b[2];
-+		tmp[2] = ((u128)(xi) * (s));
-+	}
-+	{
-+		u64 xi = b[3];
-+		tmp[3] = ((u128)(xi) * (s));
-+	}
-+	{
-+		u64 xi = b[4];
-+		tmp[4] = ((u128)(xi) * (s));
-+	}
-+	fproduct_carry_wide_(tmp);
-+	b4 = tmp[4];
-+	b0 = tmp[0];
-+	b4_ = ((b4) & (((u128)(0x7ffffffffffffLLU))));
-+	b0_ = ((b0) + (((u128)(19) * (((u64)(((b4) >> (51))))))));
-+	tmp[4] = b4_;
-+	tmp[0] = b0_;
-+	fproduct_copy_from_wide_(output, tmp);
-+}
-+
-+static __always_inline void fmul(u64 *output, u64 *a, u64 *b)
-+{
-+	fmul_fmul(output, a, b);
-+}
-+
-+static __always_inline void crecip(u64 *output, u64 *input)
-+{
-+	crecip_crecip(output, input);
-+}
-+
-+static __always_inline void point_swap_conditional_step(u64 *a, u64 *b,
-+							u64 swap1, u32 ctr)
-+{
-+	u32 i = ctr - 1;
-+	u64 ai = a[i];
-+	u64 bi = b[i];
-+	u64 x = swap1 & (ai ^ bi);
-+	u64 ai1 = ai ^ x;
-+	u64 bi1 = bi ^ x;
-+	a[i] = ai1;
-+	b[i] = bi1;
-+}
-+
-+static __always_inline void point_swap_conditional5(u64 *a, u64 *b, u64 swap1)
-+{
-+	point_swap_conditional_step(a, b, swap1, 5);
-+	point_swap_conditional_step(a, b, swap1, 4);
-+	point_swap_conditional_step(a, b, swap1, 3);
-+	point_swap_conditional_step(a, b, swap1, 2);
-+	point_swap_conditional_step(a, b, swap1, 1);
-+}
-+
-+static __always_inline void point_swap_conditional(u64 *a, u64 *b, u64 iswap)
-+{
-+	u64 swap1 = 0 - iswap;
-+	point_swap_conditional5(a, b, swap1);
-+	point_swap_conditional5(a + 5, b + 5, swap1);
-+}
-+
-+static __always_inline void point_copy(u64 *output, u64 *input)
-+{
-+	memcpy(output, input, 5 * sizeof(*input));
-+	memcpy(output + 5, input + 5, 5 * sizeof(*input));
-+}
-+
-+static __always_inline void addanddouble_fmonty(u64 *pp, u64 *ppq, u64 *p,
-+						u64 *pq, u64 *qmqp)
-+{
-+	u64 *qx = qmqp;
-+	u64 *x2 = pp;
-+	u64 *z2 = pp + 5;
-+	u64 *x3 = ppq;
-+	u64 *z3 = ppq + 5;
-+	u64 *x = p;
-+	u64 *z = p + 5;
-+	u64 *xprime = pq;
-+	u64 *zprime = pq + 5;
-+	u64 buf[40] = { 0 };
-+	u64 *origx = buf;
-+	u64 *origxprime0 = buf + 5;
-+	u64 *xxprime0;
-+	u64 *zzprime0;
-+	u64 *origxprime;
-+	xxprime0 = buf + 25;
-+	zzprime0 = buf + 30;
-+	memcpy(origx, x, 5 * sizeof(*x));
-+	fsum(x, z);
-+	fdifference(z, origx);
-+	memcpy(origxprime0, xprime, 5 * sizeof(*xprime));
-+	fsum(xprime, zprime);
-+	fdifference(zprime, origxprime0);
-+	fmul(xxprime0, xprime, z);
-+	fmul(zzprime0, x, zprime);
-+	origxprime = buf + 5;
-+	{
-+		u64 *xx0;
-+		u64 *zz0;
-+		u64 *xxprime;
-+		u64 *zzprime;
-+		u64 *zzzprime;
-+		xx0 = buf + 15;
-+		zz0 = buf + 20;
-+		xxprime = buf + 25;
-+		zzprime = buf + 30;
-+		zzzprime = buf + 35;
-+		memcpy(origxprime, xxprime, 5 * sizeof(*xxprime));
-+		fsum(xxprime, zzprime);
-+		fdifference(zzprime, origxprime);
-+		fsquare_fsquare_times(x3, xxprime, 1);
-+		fsquare_fsquare_times(zzzprime, zzprime, 1);
-+		fmul(z3, zzzprime, qx);
-+		fsquare_fsquare_times(xx0, x, 1);
-+		fsquare_fsquare_times(zz0, z, 1);
-+		{
-+			u64 *zzz;
-+			u64 *xx;
-+			u64 *zz;
-+			u64 scalar;
-+			zzz = buf + 10;
-+			xx = buf + 15;
-+			zz = buf + 20;
-+			fmul(x2, xx, zz);
-+			fdifference(zz, xx);
-+			scalar = 121665;
-+			fscalar(zzz, zz, scalar);
-+			fsum(zzz, xx);
-+			fmul(z2, zzz, zz);
-+		}
-+	}
-+}
-+
-+static __always_inline void
-+ladder_smallloop_cmult_small_loop_step(u64 *nq, u64 *nqpq, u64 *nq2, u64 *nqpq2,
-+				       u64 *q, u8 byt)
-+{
-+	u64 bit0 = (u64)(byt >> 7);
-+	u64 bit;
-+	point_swap_conditional(nq, nqpq, bit0);
-+	addanddouble_fmonty(nq2, nqpq2, nq, nqpq, q);
-+	bit = (u64)(byt >> 7);
-+	point_swap_conditional(nq2, nqpq2, bit);
-+}
-+
-+static __always_inline void
-+ladder_smallloop_cmult_small_loop_double_step(u64 *nq, u64 *nqpq, u64 *nq2,
-+					      u64 *nqpq2, u64 *q, u8 byt)
-+{
-+	u8 byt1;
-+	ladder_smallloop_cmult_small_loop_step(nq, nqpq, nq2, nqpq2, q, byt);
-+	byt1 = byt << 1;
-+	ladder_smallloop_cmult_small_loop_step(nq2, nqpq2, nq, nqpq, q, byt1);
-+}
-+
-+static __always_inline void
-+ladder_smallloop_cmult_small_loop(u64 *nq, u64 *nqpq, u64 *nq2, u64 *nqpq2,
-+				  u64 *q, u8 byt, u32 i)
-+{
-+	while (i--) {
-+		ladder_smallloop_cmult_small_loop_double_step(nq, nqpq, nq2,
-+							      nqpq2, q, byt);
-+		byt <<= 2;
-+	}
-+}
-+
-+static __always_inline void ladder_bigloop_cmult_big_loop(u8 *n1, u64 *nq,
-+							  u64 *nqpq, u64 *nq2,
-+							  u64 *nqpq2, u64 *q,
-+							  u32 i)
-+{
-+	while (i--) {
-+		u8 byte = n1[i];
-+		ladder_smallloop_cmult_small_loop(nq, nqpq, nq2, nqpq2, q,
-+						  byte, 4);
-+	}
-+}
-+
-+static void ladder_cmult(u64 *result, u8 *n1, u64 *q)
-+{
-+	u64 point_buf[40] = { 0 };
-+	u64 *nq = point_buf;
-+	u64 *nqpq = point_buf + 10;
-+	u64 *nq2 = point_buf + 20;
-+	u64 *nqpq2 = point_buf + 30;
-+	point_copy(nqpq, q);
-+	nq[0] = 1;
-+	ladder_bigloop_cmult_big_loop(n1, nq, nqpq, nq2, nqpq2, q, 32);
-+	point_copy(result, nq);
-+}
-+
-+static __always_inline void format_fexpand(u64 *output, const u8 *input)
-+{
-+	const u8 *x00 = input + 6;
-+	const u8 *x01 = input + 12;
-+	const u8 *x02 = input + 19;
-+	const u8 *x0 = input + 24;
-+	u64 i0, i1, i2, i3, i4, output0, output1, output2, output3, output4;
-+	i0 = get_unaligned_le64(input);
-+	i1 = get_unaligned_le64(x00);
-+	i2 = get_unaligned_le64(x01);
-+	i3 = get_unaligned_le64(x02);
-+	i4 = get_unaligned_le64(x0);
-+	output0 = i0 & 0x7ffffffffffffLLU;
-+	output1 = i1 >> 3 & 0x7ffffffffffffLLU;
-+	output2 = i2 >> 6 & 0x7ffffffffffffLLU;
-+	output3 = i3 >> 1 & 0x7ffffffffffffLLU;
-+	output4 = i4 >> 12 & 0x7ffffffffffffLLU;
-+	output[0] = output0;
-+	output[1] = output1;
-+	output[2] = output2;
-+	output[3] = output3;
-+	output[4] = output4;
-+}
-+
-+static __always_inline void format_fcontract_first_carry_pass(u64 *input)
-+{
-+	u64 t0 = input[0];
-+	u64 t1 = input[1];
-+	u64 t2 = input[2];
-+	u64 t3 = input[3];
-+	u64 t4 = input[4];
-+	u64 t1_ = t1 + (t0 >> 51);
-+	u64 t0_ = t0 & 0x7ffffffffffffLLU;
-+	u64 t2_ = t2 + (t1_ >> 51);
-+	u64 t1__ = t1_ & 0x7ffffffffffffLLU;
-+	u64 t3_ = t3 + (t2_ >> 51);
-+	u64 t2__ = t2_ & 0x7ffffffffffffLLU;
-+	u64 t4_ = t4 + (t3_ >> 51);
-+	u64 t3__ = t3_ & 0x7ffffffffffffLLU;
-+	input[0] = t0_;
-+	input[1] = t1__;
-+	input[2] = t2__;
-+	input[3] = t3__;
-+	input[4] = t4_;
-+}
-+
-+static __always_inline void format_fcontract_first_carry_full(u64 *input)
-+{
-+	format_fcontract_first_carry_pass(input);
-+	modulo_carry_top(input);
-+}
-+
-+static __always_inline void format_fcontract_second_carry_pass(u64 *input)
-+{
-+	u64 t0 = input[0];
-+	u64 t1 = input[1];
-+	u64 t2 = input[2];
-+	u64 t3 = input[3];
-+	u64 t4 = input[4];
-+	u64 t1_ = t1 + (t0 >> 51);
-+	u64 t0_ = t0 & 0x7ffffffffffffLLU;
-+	u64 t2_ = t2 + (t1_ >> 51);
-+	u64 t1__ = t1_ & 0x7ffffffffffffLLU;
-+	u64 t3_ = t3 + (t2_ >> 51);
-+	u64 t2__ = t2_ & 0x7ffffffffffffLLU;
-+	u64 t4_ = t4 + (t3_ >> 51);
-+	u64 t3__ = t3_ & 0x7ffffffffffffLLU;
-+	input[0] = t0_;
-+	input[1] = t1__;
-+	input[2] = t2__;
-+	input[3] = t3__;
-+	input[4] = t4_;
-+}
-+
-+static __always_inline void format_fcontract_second_carry_full(u64 *input)
-+{
-+	u64 i0;
-+	u64 i1;
-+	u64 i0_;
-+	u64 i1_;
-+	format_fcontract_second_carry_pass(input);
-+	modulo_carry_top(input);
-+	i0 = input[0];
-+	i1 = input[1];
-+	i0_ = i0 & 0x7ffffffffffffLLU;
-+	i1_ = i1 + (i0 >> 51);
-+	input[0] = i0_;
-+	input[1] = i1_;
-+}
-+
-+static __always_inline void format_fcontract_trim(u64 *input)
-+{
-+	u64 a0 = input[0];
-+	u64 a1 = input[1];
-+	u64 a2 = input[2];
-+	u64 a3 = input[3];
-+	u64 a4 = input[4];
-+	u64 mask0 = u64_gte_mask(a0, 0x7ffffffffffedLLU);
-+	u64 mask1 = u64_eq_mask(a1, 0x7ffffffffffffLLU);
-+	u64 mask2 = u64_eq_mask(a2, 0x7ffffffffffffLLU);
-+	u64 mask3 = u64_eq_mask(a3, 0x7ffffffffffffLLU);
-+	u64 mask4 = u64_eq_mask(a4, 0x7ffffffffffffLLU);
-+	u64 mask = (((mask0 & mask1) & mask2) & mask3) & mask4;
-+	u64 a0_ = a0 - (0x7ffffffffffedLLU & mask);
-+	u64 a1_ = a1 - (0x7ffffffffffffLLU & mask);
-+	u64 a2_ = a2 - (0x7ffffffffffffLLU & mask);
-+	u64 a3_ = a3 - (0x7ffffffffffffLLU & mask);
-+	u64 a4_ = a4 - (0x7ffffffffffffLLU & mask);
-+	input[0] = a0_;
-+	input[1] = a1_;
-+	input[2] = a2_;
-+	input[3] = a3_;
-+	input[4] = a4_;
-+}
-+
-+static __always_inline void format_fcontract_store(u8 *output, u64 *input)
-+{
-+	u64 t0 = input[0];
-+	u64 t1 = input[1];
-+	u64 t2 = input[2];
-+	u64 t3 = input[3];
-+	u64 t4 = input[4];
-+	u64 o0 = t1 << 51 | t0;
-+	u64 o1 = t2 << 38 | t1 >> 13;
-+	u64 o2 = t3 << 25 | t2 >> 26;
-+	u64 o3 = t4 << 12 | t3 >> 39;
-+	u8 *b0 = output;
-+	u8 *b1 = output + 8;
-+	u8 *b2 = output + 16;
-+	u8 *b3 = output + 24;
-+	put_unaligned_le64(o0, b0);
-+	put_unaligned_le64(o1, b1);
-+	put_unaligned_le64(o2, b2);
-+	put_unaligned_le64(o3, b3);
-+}
-+
-+static __always_inline void format_fcontract(u8 *output, u64 *input)
-+{
-+	format_fcontract_first_carry_full(input);
-+	format_fcontract_second_carry_full(input);
-+	format_fcontract_trim(input);
-+	format_fcontract_store(output, input);
-+}
-+
-+static __always_inline void format_scalar_of_point(u8 *scalar, u64 *point)
-+{
-+	u64 *x = point;
-+	u64 *z = point + 5;
-+	u64 buf[10] __aligned(32) = { 0 };
-+	u64 *zmone = buf;
-+	u64 *sc = buf + 5;
-+	crecip(zmone, z);
-+	fmul(sc, x, zmone);
-+	format_fcontract(scalar, sc);
-+}
-+
-+void curve25519_generic(u8 mypublic[CURVE25519_KEY_SIZE],
-+			const u8 secret[CURVE25519_KEY_SIZE],
-+			const u8 basepoint[CURVE25519_KEY_SIZE])
-+{
-+	u64 buf0[10] __aligned(32) = { 0 };
-+	u64 *x0 = buf0;
-+	u64 *z = buf0 + 5;
-+	u64 *q;
-+	format_fexpand(x0, basepoint);
-+	z[0] = 1;
-+	q = buf0;
-+	{
-+		u8 e[32] __aligned(32) = { 0 };
-+		u8 *scalar;
-+		memcpy(e, secret, 32);
-+		curve25519_clamp_secret(e);
-+		scalar = e;
-+		{
-+			u64 buf[15] = { 0 };
-+			u64 *nq = buf;
-+			u64 *x = nq;
-+			x[0] = 1;
-+			ladder_cmult(nq, scalar, q);
-+			format_scalar_of_point(mypublic, nq);
-+			memzero_explicit(buf, sizeof(buf));
-+		}
-+		memzero_explicit(e, sizeof(e));
-+	}
-+	memzero_explicit(buf0, sizeof(buf0));
-+}
---- /dev/null
-+++ b/lib/crypto/curve25519.c
-@@ -0,0 +1,25 @@
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ *
-+ * This is an implementation of the Curve25519 ECDH algorithm, using either
-+ * a 32-bit implementation or a 64-bit implementation with 128-bit integers,
-+ * depending on what is supported by the target compiler.
-+ *
-+ * Information: https://cr.yp.to/ecdh.html
-+ */
-+
-+#include <crypto/curve25519.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+
-+const u8 curve25519_null_point[CURVE25519_KEY_SIZE] __aligned(32) = { 0 };
-+const u8 curve25519_base_point[CURVE25519_KEY_SIZE] __aligned(32) = { 9 };
-+
-+EXPORT_SYMBOL(curve25519_null_point);
-+EXPORT_SYMBOL(curve25519_base_point);
-+EXPORT_SYMBOL(curve25519_generic);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("Curve25519 scalar multiplication");
-+MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0026-crypto-curve25519-add-kpp-selftest.patch b/target/linux/generic/backport-5.4/080-wireguard-0026-crypto-curve25519-add-kpp-selftest.patch
deleted file mode 100644
index b2813aeb6a..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0026-crypto-curve25519-add-kpp-selftest.patch
+++ /dev/null
@@ -1,1268 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:33 +0100
-Subject: [PATCH] crypto: curve25519 - add kpp selftest
-
-commit f613457a7af085728297bef71233c37faf3c01b1 upstream.
-
-In preparation of introducing KPP implementations of Curve25519, import
-the set of test cases proposed by the Zinc patch set, but converted to
-the KPP format.
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- crypto/testmgr.c |    6 +
- crypto/testmgr.h | 1225 ++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 1231 insertions(+)
-
---- a/crypto/testmgr.c
-+++ b/crypto/testmgr.c
-@@ -4296,6 +4296,12 @@ static const struct alg_test_desc alg_te
- 		.test = alg_test_null,
- 		.fips_allowed = 1,
- 	}, {
-+		.alg = "curve25519",
-+		.test = alg_test_kpp,
-+		.suite = {
-+			.kpp = __VECS(curve25519_tv_template)
-+		}
-+	}, {
- 		.alg = "deflate",
- 		.test = alg_test_comp,
- 		.fips_allowed = 1,
---- a/crypto/testmgr.h
-+++ b/crypto/testmgr.h
-@@ -1030,6 +1030,1231 @@ static const struct kpp_testvec dh_tv_te
- 	}
- };
- 
-+static const struct kpp_testvec curve25519_tv_template[] = {
-+{
-+	.secret = (u8[32]){ 0x77, 0x07, 0x6d, 0x0a, 0x73, 0x18, 0xa5, 0x7d,
-+		     0x3c, 0x16, 0xc1, 0x72, 0x51, 0xb2, 0x66, 0x45,
-+		     0xdf, 0x4c, 0x2f, 0x87, 0xeb, 0xc0, 0x99, 0x2a,
-+		     0xb1, 0x77, 0xfb, 0xa5, 0x1d, 0xb9, 0x2c, 0x2a },
-+	.b_public = (u8[32]){ 0xde, 0x9e, 0xdb, 0x7d, 0x7b, 0x7d, 0xc1, 0xb4,
-+		    0xd3, 0x5b, 0x61, 0xc2, 0xec, 0xe4, 0x35, 0x37,
-+		    0x3f, 0x83, 0x43, 0xc8, 0x5b, 0x78, 0x67, 0x4d,
-+		    0xad, 0xfc, 0x7e, 0x14, 0x6f, 0x88, 0x2b, 0x4f },
-+	.expected_ss = (u8[32]){ 0x4a, 0x5d, 0x9d, 0x5b, 0xa4, 0xce, 0x2d, 0xe1,
-+		    0x72, 0x8e, 0x3b, 0xf4, 0x80, 0x35, 0x0f, 0x25,
-+		    0xe0, 0x7e, 0x21, 0xc9, 0x47, 0xd1, 0x9e, 0x33,
-+		    0x76, 0xf0, 0x9b, 0x3c, 0x1e, 0x16, 0x17, 0x42 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+{
-+	.secret = (u8[32]){ 0x5d, 0xab, 0x08, 0x7e, 0x62, 0x4a, 0x8a, 0x4b,
-+		     0x79, 0xe1, 0x7f, 0x8b, 0x83, 0x80, 0x0e, 0xe6,
-+		     0x6f, 0x3b, 0xb1, 0x29, 0x26, 0x18, 0xb6, 0xfd,
-+		     0x1c, 0x2f, 0x8b, 0x27, 0xff, 0x88, 0xe0, 0xeb },
-+	.b_public = (u8[32]){ 0x85, 0x20, 0xf0, 0x09, 0x89, 0x30, 0xa7, 0x54,
-+		    0x74, 0x8b, 0x7d, 0xdc, 0xb4, 0x3e, 0xf7, 0x5a,
-+		    0x0d, 0xbf, 0x3a, 0x0d, 0x26, 0x38, 0x1a, 0xf4,
-+		    0xeb, 0xa4, 0xa9, 0x8e, 0xaa, 0x9b, 0x4e, 0x6a },
-+	.expected_ss = (u8[32]){ 0x4a, 0x5d, 0x9d, 0x5b, 0xa4, 0xce, 0x2d, 0xe1,
-+		    0x72, 0x8e, 0x3b, 0xf4, 0x80, 0x35, 0x0f, 0x25,
-+		    0xe0, 0x7e, 0x21, 0xc9, 0x47, 0xd1, 0x9e, 0x33,
-+		    0x76, 0xf0, 0x9b, 0x3c, 0x1e, 0x16, 0x17, 0x42 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+{
-+	.secret = (u8[32]){ 1 },
-+	.b_public = (u8[32]){ 0x25, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+	.expected_ss = (u8[32]){ 0x3c, 0x77, 0x77, 0xca, 0xf9, 0x97, 0xb2, 0x64,
-+		    0x41, 0x60, 0x77, 0x66, 0x5b, 0x4e, 0x22, 0x9d,
-+		    0x0b, 0x95, 0x48, 0xdc, 0x0c, 0xd8, 0x19, 0x98,
-+		    0xdd, 0xcd, 0xc5, 0xc8, 0x53, 0x3c, 0x79, 0x7f },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+{
-+	.secret = (u8[32]){ 1 },
-+	.b_public = (u8[32]){ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+	.expected_ss = (u8[32]){ 0xb3, 0x2d, 0x13, 0x62, 0xc2, 0x48, 0xd6, 0x2f,
-+		    0xe6, 0x26, 0x19, 0xcf, 0xf0, 0x4d, 0xd4, 0x3d,
-+		    0xb7, 0x3f, 0xfc, 0x1b, 0x63, 0x08, 0xed, 0xe3,
-+		    0x0b, 0x78, 0xd8, 0x73, 0x80, 0xf1, 0xe8, 0x34 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+{
-+	.secret = (u8[32]){ 0xa5, 0x46, 0xe3, 0x6b, 0xf0, 0x52, 0x7c, 0x9d,
-+		     0x3b, 0x16, 0x15, 0x4b, 0x82, 0x46, 0x5e, 0xdd,
-+		     0x62, 0x14, 0x4c, 0x0a, 0xc1, 0xfc, 0x5a, 0x18,
-+		     0x50, 0x6a, 0x22, 0x44, 0xba, 0x44, 0x9a, 0xc4 },
-+	.b_public = (u8[32]){ 0xe6, 0xdb, 0x68, 0x67, 0x58, 0x30, 0x30, 0xdb,
-+		    0x35, 0x94, 0xc1, 0xa4, 0x24, 0xb1, 0x5f, 0x7c,
-+		    0x72, 0x66, 0x24, 0xec, 0x26, 0xb3, 0x35, 0x3b,
-+		    0x10, 0xa9, 0x03, 0xa6, 0xd0, 0xab, 0x1c, 0x4c },
-+	.expected_ss = (u8[32]){ 0xc3, 0xda, 0x55, 0x37, 0x9d, 0xe9, 0xc6, 0x90,
-+		    0x8e, 0x94, 0xea, 0x4d, 0xf2, 0x8d, 0x08, 0x4f,
-+		    0x32, 0xec, 0xcf, 0x03, 0x49, 0x1c, 0x71, 0xf7,
-+		    0x54, 0xb4, 0x07, 0x55, 0x77, 0xa2, 0x85, 0x52 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+{
-+	.secret = (u8[32]){ 0xff, 0xff, 0xff, 0xff, 0x0a, 0xff, 0xff, 0xff,
-+		     0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		     0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		     0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+	.b_public = (u8[32]){ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0x0a, 0x00, 0xfb, 0x9f },
-+	.expected_ss = (u8[32]){ 0x77, 0x52, 0xb6, 0x18, 0xc1, 0x2d, 0x48, 0xd2,
-+		    0xc6, 0x93, 0x46, 0x83, 0x81, 0x7c, 0xc6, 0x57,
-+		    0xf3, 0x31, 0x03, 0x19, 0x49, 0x48, 0x20, 0x05,
-+		    0x42, 0x2b, 0x4e, 0xae, 0x8d, 0x1d, 0x43, 0x23 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+{
-+	.secret = (u8[32]){ 0x8e, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+	.b_public = (u8[32]){ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8e, 0x06 },
-+	.expected_ss = (u8[32]){ 0x5a, 0xdf, 0xaa, 0x25, 0x86, 0x8e, 0x32, 0x3d,
-+		    0xae, 0x49, 0x62, 0xc1, 0x01, 0x5c, 0xb3, 0x12,
-+		    0xe1, 0xc5, 0xc7, 0x9e, 0x95, 0x3f, 0x03, 0x99,
-+		    0xb0, 0xba, 0x16, 0x22, 0xf3, 0xb6, 0xf7, 0x0c },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - normal case */
-+{
-+	.secret = (u8[32]){ 0x48, 0x52, 0x83, 0x4d, 0x9d, 0x6b, 0x77, 0xda,
-+		     0xde, 0xab, 0xaa, 0xf2, 0xe1, 0x1d, 0xca, 0x66,
-+		     0xd1, 0x9f, 0xe7, 0x49, 0x93, 0xa7, 0xbe, 0xc3,
-+		     0x6c, 0x6e, 0x16, 0xa0, 0x98, 0x3f, 0xea, 0xba },
-+	.b_public = (u8[32]){ 0x9c, 0x64, 0x7d, 0x9a, 0xe5, 0x89, 0xb9, 0xf5,
-+		    0x8f, 0xdc, 0x3c, 0xa4, 0x94, 0x7e, 0xfb, 0xc9,
-+		    0x15, 0xc4, 0xb2, 0xe0, 0x8e, 0x74, 0x4a, 0x0e,
-+		    0xdf, 0x46, 0x9d, 0xac, 0x59, 0xc8, 0xf8, 0x5a },
-+	.expected_ss = (u8[32]){ 0x87, 0xb7, 0xf2, 0x12, 0xb6, 0x27, 0xf7, 0xa5,
-+		    0x4c, 0xa5, 0xe0, 0xbc, 0xda, 0xdd, 0xd5, 0x38,
-+		    0x9d, 0x9d, 0xe6, 0x15, 0x6c, 0xdb, 0xcf, 0x8e,
-+		    0xbe, 0x14, 0xff, 0xbc, 0xfb, 0x43, 0x65, 0x51 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key on twist */
-+{
-+	.secret = (u8[32]){ 0x58, 0x8c, 0x06, 0x1a, 0x50, 0x80, 0x4a, 0xc4,
-+		     0x88, 0xad, 0x77, 0x4a, 0xc7, 0x16, 0xc3, 0xf5,
-+		     0xba, 0x71, 0x4b, 0x27, 0x12, 0xe0, 0x48, 0x49,
-+		     0x13, 0x79, 0xa5, 0x00, 0x21, 0x19, 0x98, 0xa8 },
-+	.b_public = (u8[32]){ 0x63, 0xaa, 0x40, 0xc6, 0xe3, 0x83, 0x46, 0xc5,
-+		    0xca, 0xf2, 0x3a, 0x6d, 0xf0, 0xa5, 0xe6, 0xc8,
-+		    0x08, 0x89, 0xa0, 0x86, 0x47, 0xe5, 0x51, 0xb3,
-+		    0x56, 0x34, 0x49, 0xbe, 0xfc, 0xfc, 0x97, 0x33 },
-+	.expected_ss = (u8[32]){ 0xb1, 0xa7, 0x07, 0x51, 0x94, 0x95, 0xff, 0xff,
-+		    0xb2, 0x98, 0xff, 0x94, 0x17, 0x16, 0xb0, 0x6d,
-+		    0xfa, 0xb8, 0x7c, 0xf8, 0xd9, 0x11, 0x23, 0xfe,
-+		    0x2b, 0xe9, 0xa2, 0x33, 0xdd, 0xa2, 0x22, 0x12 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key on twist */
-+{
-+	.secret = (u8[32]){ 0xb0, 0x5b, 0xfd, 0x32, 0xe5, 0x53, 0x25, 0xd9,
-+		     0xfd, 0x64, 0x8c, 0xb3, 0x02, 0x84, 0x80, 0x39,
-+		     0x00, 0x0b, 0x39, 0x0e, 0x44, 0xd5, 0x21, 0xe5,
-+		     0x8a, 0xab, 0x3b, 0x29, 0xa6, 0x96, 0x0b, 0xa8 },
-+	.b_public = (u8[32]){ 0x0f, 0x83, 0xc3, 0x6f, 0xde, 0xd9, 0xd3, 0x2f,
-+		    0xad, 0xf4, 0xef, 0xa3, 0xae, 0x93, 0xa9, 0x0b,
-+		    0xb5, 0xcf, 0xa6, 0x68, 0x93, 0xbc, 0x41, 0x2c,
-+		    0x43, 0xfa, 0x72, 0x87, 0xdb, 0xb9, 0x97, 0x79 },
-+	.expected_ss = (u8[32]){ 0x67, 0xdd, 0x4a, 0x6e, 0x16, 0x55, 0x33, 0x53,
-+		    0x4c, 0x0e, 0x3f, 0x17, 0x2e, 0x4a, 0xb8, 0x57,
-+		    0x6b, 0xca, 0x92, 0x3a, 0x5f, 0x07, 0xb2, 0xc0,
-+		    0x69, 0xb4, 0xc3, 0x10, 0xff, 0x2e, 0x93, 0x5b },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key on twist */
-+{
-+	.secret = (u8[32]){ 0x70, 0xe3, 0x4b, 0xcb, 0xe1, 0xf4, 0x7f, 0xbc,
-+		     0x0f, 0xdd, 0xfd, 0x7c, 0x1e, 0x1a, 0xa5, 0x3d,
-+		     0x57, 0xbf, 0xe0, 0xf6, 0x6d, 0x24, 0x30, 0x67,
-+		     0xb4, 0x24, 0xbb, 0x62, 0x10, 0xbe, 0xd1, 0x9c },
-+	.b_public = (u8[32]){ 0x0b, 0x82, 0x11, 0xa2, 0xb6, 0x04, 0x90, 0x97,
-+		    0xf6, 0x87, 0x1c, 0x6c, 0x05, 0x2d, 0x3c, 0x5f,
-+		    0xc1, 0xba, 0x17, 0xda, 0x9e, 0x32, 0xae, 0x45,
-+		    0x84, 0x03, 0xb0, 0x5b, 0xb2, 0x83, 0x09, 0x2a },
-+	.expected_ss = (u8[32]){ 0x4a, 0x06, 0x38, 0xcf, 0xaa, 0x9e, 0xf1, 0x93,
-+		    0x3b, 0x47, 0xf8, 0x93, 0x92, 0x96, 0xa6, 0xb2,
-+		    0x5b, 0xe5, 0x41, 0xef, 0x7f, 0x70, 0xe8, 0x44,
-+		    0xc0, 0xbc, 0xc0, 0x0b, 0x13, 0x4d, 0xe6, 0x4a },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key on twist */
-+{
-+	.secret = (u8[32]){ 0x68, 0xc1, 0xf3, 0xa6, 0x53, 0xa4, 0xcd, 0xb1,
-+		     0xd3, 0x7b, 0xba, 0x94, 0x73, 0x8f, 0x8b, 0x95,
-+		     0x7a, 0x57, 0xbe, 0xb2, 0x4d, 0x64, 0x6e, 0x99,
-+		     0x4d, 0xc2, 0x9a, 0x27, 0x6a, 0xad, 0x45, 0x8d },
-+	.b_public = (u8[32]){ 0x34, 0x3a, 0xc2, 0x0a, 0x3b, 0x9c, 0x6a, 0x27,
-+		    0xb1, 0x00, 0x81, 0x76, 0x50, 0x9a, 0xd3, 0x07,
-+		    0x35, 0x85, 0x6e, 0xc1, 0xc8, 0xd8, 0xfc, 0xae,
-+		    0x13, 0x91, 0x2d, 0x08, 0xd1, 0x52, 0xf4, 0x6c },
-+	.expected_ss = (u8[32]){ 0x39, 0x94, 0x91, 0xfc, 0xe8, 0xdf, 0xab, 0x73,
-+		    0xb4, 0xf9, 0xf6, 0x11, 0xde, 0x8e, 0xa0, 0xb2,
-+		    0x7b, 0x28, 0xf8, 0x59, 0x94, 0x25, 0x0b, 0x0f,
-+		    0x47, 0x5d, 0x58, 0x5d, 0x04, 0x2a, 0xc2, 0x07 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key on twist */
-+{
-+	.secret = (u8[32]){ 0xd8, 0x77, 0xb2, 0x6d, 0x06, 0xdf, 0xf9, 0xd9,
-+		     0xf7, 0xfd, 0x4c, 0x5b, 0x37, 0x69, 0xf8, 0xcd,
-+		     0xd5, 0xb3, 0x05, 0x16, 0xa5, 0xab, 0x80, 0x6b,
-+		     0xe3, 0x24, 0xff, 0x3e, 0xb6, 0x9e, 0xa0, 0xb2 },
-+	.b_public = (u8[32]){ 0xfa, 0x69, 0x5f, 0xc7, 0xbe, 0x8d, 0x1b, 0xe5,
-+		    0xbf, 0x70, 0x48, 0x98, 0xf3, 0x88, 0xc4, 0x52,
-+		    0xba, 0xfd, 0xd3, 0xb8, 0xea, 0xe8, 0x05, 0xf8,
-+		    0x68, 0x1a, 0x8d, 0x15, 0xc2, 0xd4, 0xe1, 0x42 },
-+	.expected_ss = (u8[32]){ 0x2c, 0x4f, 0xe1, 0x1d, 0x49, 0x0a, 0x53, 0x86,
-+		    0x17, 0x76, 0xb1, 0x3b, 0x43, 0x54, 0xab, 0xd4,
-+		    0xcf, 0x5a, 0x97, 0x69, 0x9d, 0xb6, 0xe6, 0xc6,
-+		    0x8c, 0x16, 0x26, 0xd0, 0x76, 0x62, 0xf7, 0x58 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case on twist */
-+{
-+	.secret = (u8[32]){ 0x38, 0xdd, 0xe9, 0xf3, 0xe7, 0xb7, 0x99, 0x04,
-+		     0x5f, 0x9a, 0xc3, 0x79, 0x3d, 0x4a, 0x92, 0x77,
-+		     0xda, 0xde, 0xad, 0xc4, 0x1b, 0xec, 0x02, 0x90,
-+		     0xf8, 0x1f, 0x74, 0x4f, 0x73, 0x77, 0x5f, 0x84 },
-+	.b_public = (u8[32]){ 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+	.expected_ss = (u8[32]){ 0x9a, 0x2c, 0xfe, 0x84, 0xff, 0x9c, 0x4a, 0x97,
-+		    0x39, 0x62, 0x5c, 0xae, 0x4a, 0x3b, 0x82, 0xa9,
-+		    0x06, 0x87, 0x7a, 0x44, 0x19, 0x46, 0xf8, 0xd7,
-+		    0xb3, 0xd7, 0x95, 0xfe, 0x8f, 0x5d, 0x16, 0x39 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case on twist */
-+{
-+	.secret = (u8[32]){ 0x98, 0x57, 0xa9, 0x14, 0xe3, 0xc2, 0x90, 0x36,
-+		     0xfd, 0x9a, 0x44, 0x2b, 0xa5, 0x26, 0xb5, 0xcd,
-+		     0xcd, 0xf2, 0x82, 0x16, 0x15, 0x3e, 0x63, 0x6c,
-+		     0x10, 0x67, 0x7a, 0xca, 0xb6, 0xbd, 0x6a, 0xa5 },
-+	.b_public = (u8[32]){ 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+	.expected_ss = (u8[32]){ 0x4d, 0xa4, 0xe0, 0xaa, 0x07, 0x2c, 0x23, 0x2e,
-+		    0xe2, 0xf0, 0xfa, 0x4e, 0x51, 0x9a, 0xe5, 0x0b,
-+		    0x52, 0xc1, 0xed, 0xd0, 0x8a, 0x53, 0x4d, 0x4e,
-+		    0xf3, 0x46, 0xc2, 0xe1, 0x06, 0xd2, 0x1d, 0x60 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case on twist */
-+{
-+	.secret = (u8[32]){ 0x48, 0xe2, 0x13, 0x0d, 0x72, 0x33, 0x05, 0xed,
-+		     0x05, 0xe6, 0xe5, 0x89, 0x4d, 0x39, 0x8a, 0x5e,
-+		     0x33, 0x36, 0x7a, 0x8c, 0x6a, 0xac, 0x8f, 0xcd,
-+		     0xf0, 0xa8, 0x8e, 0x4b, 0x42, 0x82, 0x0d, 0xb7 },
-+	.b_public = (u8[32]){ 0xff, 0xff, 0xff, 0x03, 0x00, 0x00, 0xf8, 0xff,
-+		    0xff, 0x1f, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff,
-+		    0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0x07, 0x00,
-+		    0x00, 0xf0, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00 },
-+	.expected_ss = (u8[32]){ 0x9e, 0xd1, 0x0c, 0x53, 0x74, 0x7f, 0x64, 0x7f,
-+		    0x82, 0xf4, 0x51, 0x25, 0xd3, 0xde, 0x15, 0xa1,
-+		    0xe6, 0xb8, 0x24, 0x49, 0x6a, 0xb4, 0x04, 0x10,
-+		    0xff, 0xcc, 0x3c, 0xfe, 0x95, 0x76, 0x0f, 0x3b },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case on twist */
-+{
-+	.secret = (u8[32]){ 0x28, 0xf4, 0x10, 0x11, 0x69, 0x18, 0x51, 0xb3,
-+		     0xa6, 0x2b, 0x64, 0x15, 0x53, 0xb3, 0x0d, 0x0d,
-+		     0xfd, 0xdc, 0xb8, 0xff, 0xfc, 0xf5, 0x37, 0x00,
-+		     0xa7, 0xbe, 0x2f, 0x6a, 0x87, 0x2e, 0x9f, 0xb0 },
-+	.b_public = (u8[32]){ 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0x07, 0x00,
-+		    0x00, 0xe0, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00,
-+		    0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0xf8, 0xff,
-+		    0xff, 0x0f, 0x00, 0x00, 0xc0, 0xff, 0xff, 0x7f },
-+	.expected_ss = (u8[32]){ 0xcf, 0x72, 0xb4, 0xaa, 0x6a, 0xa1, 0xc9, 0xf8,
-+		    0x94, 0xf4, 0x16, 0x5b, 0x86, 0x10, 0x9a, 0xa4,
-+		    0x68, 0x51, 0x76, 0x48, 0xe1, 0xf0, 0xcc, 0x70,
-+		    0xe1, 0xab, 0x08, 0x46, 0x01, 0x76, 0x50, 0x6b },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case on twist */
-+{
-+	.secret = (u8[32]){ 0x18, 0xa9, 0x3b, 0x64, 0x99, 0xb9, 0xf6, 0xb3,
-+		     0x22, 0x5c, 0xa0, 0x2f, 0xef, 0x41, 0x0e, 0x0a,
-+		     0xde, 0xc2, 0x35, 0x32, 0x32, 0x1d, 0x2d, 0x8e,
-+		     0xf1, 0xa6, 0xd6, 0x02, 0xa8, 0xc6, 0x5b, 0x83 },
-+	.b_public = (u8[32]){ 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+		    0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+		    0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+		    0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0x7f },
-+	.expected_ss = (u8[32]){ 0x5d, 0x50, 0xb6, 0x28, 0x36, 0xbb, 0x69, 0x57,
-+		    0x94, 0x10, 0x38, 0x6c, 0xf7, 0xbb, 0x81, 0x1c,
-+		    0x14, 0xbf, 0x85, 0xb1, 0xc7, 0xb1, 0x7e, 0x59,
-+		    0x24, 0xc7, 0xff, 0xea, 0x91, 0xef, 0x9e, 0x12 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case on twist */
-+{
-+	.secret = (u8[32]){ 0xc0, 0x1d, 0x13, 0x05, 0xa1, 0x33, 0x8a, 0x1f,
-+		     0xca, 0xc2, 0xba, 0x7e, 0x2e, 0x03, 0x2b, 0x42,
-+		     0x7e, 0x0b, 0x04, 0x90, 0x31, 0x65, 0xac, 0xa9,
-+		     0x57, 0xd8, 0xd0, 0x55, 0x3d, 0x87, 0x17, 0xb0 },
-+	.b_public = (u8[32]){ 0xea, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+	.expected_ss = (u8[32]){ 0x19, 0x23, 0x0e, 0xb1, 0x48, 0xd5, 0xd6, 0x7c,
-+		    0x3c, 0x22, 0xab, 0x1d, 0xae, 0xff, 0x80, 0xa5,
-+		    0x7e, 0xae, 0x42, 0x65, 0xce, 0x28, 0x72, 0x65,
-+		    0x7b, 0x2c, 0x80, 0x99, 0xfc, 0x69, 0x8e, 0x50 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for public key */
-+{
-+	.secret = (u8[32]){ 0x38, 0x6f, 0x7f, 0x16, 0xc5, 0x07, 0x31, 0xd6,
-+		     0x4f, 0x82, 0xe6, 0xa1, 0x70, 0xb1, 0x42, 0xa4,
-+		     0xe3, 0x4f, 0x31, 0xfd, 0x77, 0x68, 0xfc, 0xb8,
-+		     0x90, 0x29, 0x25, 0xe7, 0xd1, 0xe2, 0x1a, 0xbe },
-+	.b_public = (u8[32]){ 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+	.expected_ss = (u8[32]){ 0x0f, 0xca, 0xb5, 0xd8, 0x42, 0xa0, 0x78, 0xd7,
-+		    0xa7, 0x1f, 0xc5, 0x9b, 0x57, 0xbf, 0xb4, 0xca,
-+		    0x0b, 0xe6, 0x87, 0x3b, 0x49, 0xdc, 0xdb, 0x9f,
-+		    0x44, 0xe1, 0x4a, 0xe8, 0xfb, 0xdf, 0xa5, 0x42 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for public key */
-+{
-+	.secret = (u8[32]){ 0xe0, 0x23, 0xa2, 0x89, 0xbd, 0x5e, 0x90, 0xfa,
-+		     0x28, 0x04, 0xdd, 0xc0, 0x19, 0xa0, 0x5e, 0xf3,
-+		     0xe7, 0x9d, 0x43, 0x4b, 0xb6, 0xea, 0x2f, 0x52,
-+		     0x2e, 0xcb, 0x64, 0x3a, 0x75, 0x29, 0x6e, 0x95 },
-+	.b_public = (u8[32]){ 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+		    0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+		    0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+		    0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00 },
-+	.expected_ss = (u8[32]){ 0x54, 0xce, 0x8f, 0x22, 0x75, 0xc0, 0x77, 0xe3,
-+		    0xb1, 0x30, 0x6a, 0x39, 0x39, 0xc5, 0xe0, 0x3e,
-+		    0xef, 0x6b, 0xbb, 0x88, 0x06, 0x05, 0x44, 0x75,
-+		    0x8d, 0x9f, 0xef, 0x59, 0xb0, 0xbc, 0x3e, 0x4f },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for public key */
-+{
-+	.secret = (u8[32]){ 0x68, 0xf0, 0x10, 0xd6, 0x2e, 0xe8, 0xd9, 0x26,
-+		     0x05, 0x3a, 0x36, 0x1c, 0x3a, 0x75, 0xc6, 0xea,
-+		     0x4e, 0xbd, 0xc8, 0x60, 0x6a, 0xb2, 0x85, 0x00,
-+		     0x3a, 0x6f, 0x8f, 0x40, 0x76, 0xb0, 0x1e, 0x83 },
-+	.b_public = (u8[32]){ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03 },
-+	.expected_ss = (u8[32]){ 0xf1, 0x36, 0x77, 0x5c, 0x5b, 0xeb, 0x0a, 0xf8,
-+		    0x11, 0x0a, 0xf1, 0x0b, 0x20, 0x37, 0x23, 0x32,
-+		    0x04, 0x3c, 0xab, 0x75, 0x24, 0x19, 0x67, 0x87,
-+		    0x75, 0xa2, 0x23, 0xdf, 0x57, 0xc9, 0xd3, 0x0d },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for public key */
-+{
-+	.secret = (u8[32]){ 0x58, 0xeb, 0xcb, 0x35, 0xb0, 0xf8, 0x84, 0x5c,
-+		     0xaf, 0x1e, 0xc6, 0x30, 0xf9, 0x65, 0x76, 0xb6,
-+		     0x2c, 0x4b, 0x7b, 0x6c, 0x36, 0xb2, 0x9d, 0xeb,
-+		     0x2c, 0xb0, 0x08, 0x46, 0x51, 0x75, 0x5c, 0x96 },
-+	.b_public = (u8[32]){ 0xff, 0xff, 0xff, 0xfb, 0xff, 0xff, 0xfb, 0xff,
-+		    0xff, 0xdf, 0xff, 0xff, 0xdf, 0xff, 0xff, 0xff,
-+		    0xfe, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xf7, 0xff,
-+		    0xff, 0xf7, 0xff, 0xff, 0xbf, 0xff, 0xff, 0x3f },
-+	.expected_ss = (u8[32]){ 0xbf, 0x9a, 0xff, 0xd0, 0x6b, 0x84, 0x40, 0x85,
-+		    0x58, 0x64, 0x60, 0x96, 0x2e, 0xf2, 0x14, 0x6f,
-+		    0xf3, 0xd4, 0x53, 0x3d, 0x94, 0x44, 0xaa, 0xb0,
-+		    0x06, 0xeb, 0x88, 0xcc, 0x30, 0x54, 0x40, 0x7d },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for public key */
-+{
-+	.secret = (u8[32]){ 0x18, 0x8c, 0x4b, 0xc5, 0xb9, 0xc4, 0x4b, 0x38,
-+		     0xbb, 0x65, 0x8b, 0x9b, 0x2a, 0xe8, 0x2d, 0x5b,
-+		     0x01, 0x01, 0x5e, 0x09, 0x31, 0x84, 0xb1, 0x7c,
-+		     0xb7, 0x86, 0x35, 0x03, 0xa7, 0x83, 0xe1, 0xbb },
-+	.b_public = (u8[32]){ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f },
-+	.expected_ss = (u8[32]){ 0xd4, 0x80, 0xde, 0x04, 0xf6, 0x99, 0xcb, 0x3b,
-+		    0xe0, 0x68, 0x4a, 0x9c, 0xc2, 0xe3, 0x12, 0x81,
-+		    0xea, 0x0b, 0xc5, 0xa9, 0xdc, 0xc1, 0x57, 0xd3,
-+		    0xd2, 0x01, 0x58, 0xd4, 0x6c, 0xa5, 0x24, 0x6d },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for public key */
-+{
-+	.secret = (u8[32]){ 0xe0, 0x6c, 0x11, 0xbb, 0x2e, 0x13, 0xce, 0x3d,
-+		     0xc7, 0x67, 0x3f, 0x67, 0xf5, 0x48, 0x22, 0x42,
-+		     0x90, 0x94, 0x23, 0xa9, 0xae, 0x95, 0xee, 0x98,
-+		     0x6a, 0x98, 0x8d, 0x98, 0xfa, 0xee, 0x23, 0xa2 },
-+	.b_public = (u8[32]){ 0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0x7f,
-+		    0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0x7f,
-+		    0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0x7f,
-+		    0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0x7f },
-+	.expected_ss = (u8[32]){ 0x4c, 0x44, 0x01, 0xcc, 0xe6, 0xb5, 0x1e, 0x4c,
-+		    0xb1, 0x8f, 0x27, 0x90, 0x24, 0x6c, 0x9b, 0xf9,
-+		    0x14, 0xdb, 0x66, 0x77, 0x50, 0xa1, 0xcb, 0x89,
-+		    0x06, 0x90, 0x92, 0xaf, 0x07, 0x29, 0x22, 0x76 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for public key */
-+{
-+	.secret = (u8[32]){ 0xc0, 0x65, 0x8c, 0x46, 0xdd, 0xe1, 0x81, 0x29,
-+		     0x29, 0x38, 0x77, 0x53, 0x5b, 0x11, 0x62, 0xb6,
-+		     0xf9, 0xf5, 0x41, 0x4a, 0x23, 0xcf, 0x4d, 0x2c,
-+		     0xbc, 0x14, 0x0a, 0x4d, 0x99, 0xda, 0x2b, 0x8f },
-+	.b_public = (u8[32]){ 0xeb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+	.expected_ss = (u8[32]){ 0x57, 0x8b, 0xa8, 0xcc, 0x2d, 0xbd, 0xc5, 0x75,
-+		    0xaf, 0xcf, 0x9d, 0xf2, 0xb3, 0xee, 0x61, 0x89,
-+		    0xf5, 0x33, 0x7d, 0x68, 0x54, 0xc7, 0x9b, 0x4c,
-+		    0xe1, 0x65, 0xea, 0x12, 0x29, 0x3b, 0x3a, 0x0f },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0xf0, 0x1e, 0x48, 0xda, 0xfa, 0xc9, 0xd7, 0xbc,
-+		     0xf5, 0x89, 0xcb, 0xc3, 0x82, 0xc8, 0x78, 0xd1,
-+		     0x8b, 0xda, 0x35, 0x50, 0x58, 0x9f, 0xfb, 0x5d,
-+		     0x50, 0xb5, 0x23, 0xbe, 0xbe, 0x32, 0x9d, 0xae },
-+	.b_public = (u8[32]){ 0xef, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+	.expected_ss = (u8[32]){ 0xbd, 0x36, 0xa0, 0x79, 0x0e, 0xb8, 0x83, 0x09,
-+		    0x8c, 0x98, 0x8b, 0x21, 0x78, 0x67, 0x73, 0xde,
-+		    0x0b, 0x3a, 0x4d, 0xf1, 0x62, 0x28, 0x2c, 0xf1,
-+		    0x10, 0xde, 0x18, 0xdd, 0x48, 0x4c, 0xe7, 0x4b },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0x28, 0x87, 0x96, 0xbc, 0x5a, 0xff, 0x4b, 0x81,
-+		     0xa3, 0x75, 0x01, 0x75, 0x7b, 0xc0, 0x75, 0x3a,
-+		     0x3c, 0x21, 0x96, 0x47, 0x90, 0xd3, 0x86, 0x99,
-+		     0x30, 0x8d, 0xeb, 0xc1, 0x7a, 0x6e, 0xaf, 0x8d },
-+	.b_public = (u8[32]){ 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+	.expected_ss = (u8[32]){ 0xb4, 0xe0, 0xdd, 0x76, 0xda, 0x7b, 0x07, 0x17,
-+		    0x28, 0xb6, 0x1f, 0x85, 0x67, 0x71, 0xaa, 0x35,
-+		    0x6e, 0x57, 0xed, 0xa7, 0x8a, 0x5b, 0x16, 0x55,
-+		    0xcc, 0x38, 0x20, 0xfb, 0x5f, 0x85, 0x4c, 0x5c },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0x98, 0xdf, 0x84, 0x5f, 0x66, 0x51, 0xbf, 0x11,
-+		     0x38, 0x22, 0x1f, 0x11, 0x90, 0x41, 0xf7, 0x2b,
-+		     0x6d, 0xbc, 0x3c, 0x4a, 0xce, 0x71, 0x43, 0xd9,
-+		     0x9f, 0xd5, 0x5a, 0xd8, 0x67, 0x48, 0x0d, 0xa8 },
-+	.b_public = (u8[32]){ 0xf1, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+	.expected_ss = (u8[32]){ 0x6f, 0xdf, 0x6c, 0x37, 0x61, 0x1d, 0xbd, 0x53,
-+		    0x04, 0xdc, 0x0f, 0x2e, 0xb7, 0xc9, 0x51, 0x7e,
-+		    0xb3, 0xc5, 0x0e, 0x12, 0xfd, 0x05, 0x0a, 0xc6,
-+		    0xde, 0xc2, 0x70, 0x71, 0xd4, 0xbf, 0xc0, 0x34 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0xf0, 0x94, 0x98, 0xe4, 0x6f, 0x02, 0xf8, 0x78,
-+		     0x82, 0x9e, 0x78, 0xb8, 0x03, 0xd3, 0x16, 0xa2,
-+		     0xed, 0x69, 0x5d, 0x04, 0x98, 0xa0, 0x8a, 0xbd,
-+		     0xf8, 0x27, 0x69, 0x30, 0xe2, 0x4e, 0xdc, 0xb0 },
-+	.b_public = (u8[32]){ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+	.expected_ss = (u8[32]){ 0x4c, 0x8f, 0xc4, 0xb1, 0xc6, 0xab, 0x88, 0xfb,
-+		    0x21, 0xf1, 0x8f, 0x6d, 0x4c, 0x81, 0x02, 0x40,
-+		    0xd4, 0xe9, 0x46, 0x51, 0xba, 0x44, 0xf7, 0xa2,
-+		    0xc8, 0x63, 0xce, 0xc7, 0xdc, 0x56, 0x60, 0x2d },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0x18, 0x13, 0xc1, 0x0a, 0x5c, 0x7f, 0x21, 0xf9,
-+		     0x6e, 0x17, 0xf2, 0x88, 0xc0, 0xcc, 0x37, 0x60,
-+		     0x7c, 0x04, 0xc5, 0xf5, 0xae, 0xa2, 0xdb, 0x13,
-+		     0x4f, 0x9e, 0x2f, 0xfc, 0x66, 0xbd, 0x9d, 0xb8 },
-+	.b_public = (u8[32]){ 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80 },
-+	.expected_ss = (u8[32]){ 0x1c, 0xd0, 0xb2, 0x82, 0x67, 0xdc, 0x54, 0x1c,
-+		    0x64, 0x2d, 0x6d, 0x7d, 0xca, 0x44, 0xa8, 0xb3,
-+		    0x8a, 0x63, 0x73, 0x6e, 0xef, 0x5c, 0x4e, 0x65,
-+		    0x01, 0xff, 0xbb, 0xb1, 0x78, 0x0c, 0x03, 0x3c },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0x78, 0x57, 0xfb, 0x80, 0x86, 0x53, 0x64, 0x5a,
-+		     0x0b, 0xeb, 0x13, 0x8a, 0x64, 0xf5, 0xf4, 0xd7,
-+		     0x33, 0xa4, 0x5e, 0xa8, 0x4c, 0x3c, 0xda, 0x11,
-+		     0xa9, 0xc0, 0x6f, 0x7e, 0x71, 0x39, 0x14, 0x9e },
-+	.b_public = (u8[32]){ 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80 },
-+	.expected_ss = (u8[32]){ 0x87, 0x55, 0xbe, 0x01, 0xc6, 0x0a, 0x7e, 0x82,
-+		    0x5c, 0xff, 0x3e, 0x0e, 0x78, 0xcb, 0x3a, 0xa4,
-+		    0x33, 0x38, 0x61, 0x51, 0x6a, 0xa5, 0x9b, 0x1c,
-+		    0x51, 0xa8, 0xb2, 0xa5, 0x43, 0xdf, 0xa8, 0x22 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0xe0, 0x3a, 0xa8, 0x42, 0xe2, 0xab, 0xc5, 0x6e,
-+		     0x81, 0xe8, 0x7b, 0x8b, 0x9f, 0x41, 0x7b, 0x2a,
-+		     0x1e, 0x59, 0x13, 0xc7, 0x23, 0xee, 0xd2, 0x8d,
-+		     0x75, 0x2f, 0x8d, 0x47, 0xa5, 0x9f, 0x49, 0x8f },
-+	.b_public = (u8[32]){ 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80 },
-+	.expected_ss = (u8[32]){ 0x54, 0xc9, 0xa1, 0xed, 0x95, 0xe5, 0x46, 0xd2,
-+		    0x78, 0x22, 0xa3, 0x60, 0x93, 0x1d, 0xda, 0x60,
-+		    0xa1, 0xdf, 0x04, 0x9d, 0xa6, 0xf9, 0x04, 0x25,
-+		    0x3c, 0x06, 0x12, 0xbb, 0xdc, 0x08, 0x74, 0x76 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0xf8, 0xf7, 0x07, 0xb7, 0x99, 0x9b, 0x18, 0xcb,
-+		     0x0d, 0x6b, 0x96, 0x12, 0x4f, 0x20, 0x45, 0x97,
-+		     0x2c, 0xa2, 0x74, 0xbf, 0xc1, 0x54, 0xad, 0x0c,
-+		     0x87, 0x03, 0x8c, 0x24, 0xc6, 0xd0, 0xd4, 0xb2 },
-+	.b_public = (u8[32]){ 0xda, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+	.expected_ss = (u8[32]){ 0xcc, 0x1f, 0x40, 0xd7, 0x43, 0xcd, 0xc2, 0x23,
-+		    0x0e, 0x10, 0x43, 0xda, 0xba, 0x8b, 0x75, 0xe8,
-+		    0x10, 0xf1, 0xfb, 0xab, 0x7f, 0x25, 0x52, 0x69,
-+		    0xbd, 0x9e, 0xbb, 0x29, 0xe6, 0xbf, 0x49, 0x4f },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0xa0, 0x34, 0xf6, 0x84, 0xfa, 0x63, 0x1e, 0x1a,
-+		     0x34, 0x81, 0x18, 0xc1, 0xce, 0x4c, 0x98, 0x23,
-+		     0x1f, 0x2d, 0x9e, 0xec, 0x9b, 0xa5, 0x36, 0x5b,
-+		     0x4a, 0x05, 0xd6, 0x9a, 0x78, 0x5b, 0x07, 0x96 },
-+	.b_public = (u8[32]){ 0xdb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+	.expected_ss = (u8[32]){ 0x54, 0x99, 0x8e, 0xe4, 0x3a, 0x5b, 0x00, 0x7b,
-+		    0xf4, 0x99, 0xf0, 0x78, 0xe7, 0x36, 0x52, 0x44,
-+		    0x00, 0xa8, 0xb5, 0xc7, 0xe9, 0xb9, 0xb4, 0x37,
-+		    0x71, 0x74, 0x8c, 0x7c, 0xdf, 0x88, 0x04, 0x12 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0x30, 0xb6, 0xc6, 0xa0, 0xf2, 0xff, 0xa6, 0x80,
-+		     0x76, 0x8f, 0x99, 0x2b, 0xa8, 0x9e, 0x15, 0x2d,
-+		     0x5b, 0xc9, 0x89, 0x3d, 0x38, 0xc9, 0x11, 0x9b,
-+		     0xe4, 0xf7, 0x67, 0xbf, 0xab, 0x6e, 0x0c, 0xa5 },
-+	.b_public = (u8[32]){ 0xdc, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+	.expected_ss = (u8[32]){ 0xea, 0xd9, 0xb3, 0x8e, 0xfd, 0xd7, 0x23, 0x63,
-+		    0x79, 0x34, 0xe5, 0x5a, 0xb7, 0x17, 0xa7, 0xae,
-+		    0x09, 0xeb, 0x86, 0xa2, 0x1d, 0xc3, 0x6a, 0x3f,
-+		    0xee, 0xb8, 0x8b, 0x75, 0x9e, 0x39, 0x1e, 0x09 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0x90, 0x1b, 0x9d, 0xcf, 0x88, 0x1e, 0x01, 0xe0,
-+		     0x27, 0x57, 0x50, 0x35, 0xd4, 0x0b, 0x43, 0xbd,
-+		     0xc1, 0xc5, 0x24, 0x2e, 0x03, 0x08, 0x47, 0x49,
-+		     0x5b, 0x0c, 0x72, 0x86, 0x46, 0x9b, 0x65, 0x91 },
-+	.b_public = (u8[32]){ 0xea, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+	.expected_ss = (u8[32]){ 0x60, 0x2f, 0xf4, 0x07, 0x89, 0xb5, 0x4b, 0x41,
-+		    0x80, 0x59, 0x15, 0xfe, 0x2a, 0x62, 0x21, 0xf0,
-+		    0x7a, 0x50, 0xff, 0xc2, 0xc3, 0xfc, 0x94, 0xcf,
-+		    0x61, 0xf1, 0x3d, 0x79, 0x04, 0xe8, 0x8e, 0x0e },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0x80, 0x46, 0x67, 0x7c, 0x28, 0xfd, 0x82, 0xc9,
-+		     0xa1, 0xbd, 0xb7, 0x1a, 0x1a, 0x1a, 0x34, 0xfa,
-+		     0xba, 0x12, 0x25, 0xe2, 0x50, 0x7f, 0xe3, 0xf5,
-+		     0x4d, 0x10, 0xbd, 0x5b, 0x0d, 0x86, 0x5f, 0x8e },
-+	.b_public = (u8[32]){ 0xeb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+	.expected_ss = (u8[32]){ 0xe0, 0x0a, 0xe8, 0xb1, 0x43, 0x47, 0x12, 0x47,
-+		    0xba, 0x24, 0xf1, 0x2c, 0x88, 0x55, 0x36, 0xc3,
-+		    0xcb, 0x98, 0x1b, 0x58, 0xe1, 0xe5, 0x6b, 0x2b,
-+		    0xaf, 0x35, 0xc1, 0x2a, 0xe1, 0xf7, 0x9c, 0x26 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0x60, 0x2f, 0x7e, 0x2f, 0x68, 0xa8, 0x46, 0xb8,
-+		     0x2c, 0xc2, 0x69, 0xb1, 0xd4, 0x8e, 0x93, 0x98,
-+		     0x86, 0xae, 0x54, 0xfd, 0x63, 0x6c, 0x1f, 0xe0,
-+		     0x74, 0xd7, 0x10, 0x12, 0x7d, 0x47, 0x24, 0x91 },
-+	.b_public = (u8[32]){ 0xef, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+	.expected_ss = (u8[32]){ 0x98, 0xcb, 0x9b, 0x50, 0xdd, 0x3f, 0xc2, 0xb0,
-+		    0xd4, 0xf2, 0xd2, 0xbf, 0x7c, 0x5c, 0xfd, 0xd1,
-+		    0x0c, 0x8f, 0xcd, 0x31, 0xfc, 0x40, 0xaf, 0x1a,
-+		    0xd4, 0x4f, 0x47, 0xc1, 0x31, 0x37, 0x63, 0x62 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0x60, 0x88, 0x7b, 0x3d, 0xc7, 0x24, 0x43, 0x02,
-+		     0x6e, 0xbe, 0xdb, 0xbb, 0xb7, 0x06, 0x65, 0xf4,
-+		     0x2b, 0x87, 0xad, 0xd1, 0x44, 0x0e, 0x77, 0x68,
-+		     0xfb, 0xd7, 0xe8, 0xe2, 0xce, 0x5f, 0x63, 0x9d },
-+	.b_public = (u8[32]){ 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+	.expected_ss = (u8[32]){ 0x38, 0xd6, 0x30, 0x4c, 0x4a, 0x7e, 0x6d, 0x9f,
-+		    0x79, 0x59, 0x33, 0x4f, 0xb5, 0x24, 0x5b, 0xd2,
-+		    0xc7, 0x54, 0x52, 0x5d, 0x4c, 0x91, 0xdb, 0x95,
-+		    0x02, 0x06, 0x92, 0x62, 0x34, 0xc1, 0xf6, 0x33 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0x78, 0xd3, 0x1d, 0xfa, 0x85, 0x44, 0x97, 0xd7,
-+		     0x2d, 0x8d, 0xef, 0x8a, 0x1b, 0x7f, 0xb0, 0x06,
-+		     0xce, 0xc2, 0xd8, 0xc4, 0x92, 0x46, 0x47, 0xc9,
-+		     0x38, 0x14, 0xae, 0x56, 0xfa, 0xed, 0xa4, 0x95 },
-+	.b_public = (u8[32]){ 0xf1, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+	.expected_ss = (u8[32]){ 0x78, 0x6c, 0xd5, 0x49, 0x96, 0xf0, 0x14, 0xa5,
-+		    0xa0, 0x31, 0xec, 0x14, 0xdb, 0x81, 0x2e, 0xd0,
-+		    0x83, 0x55, 0x06, 0x1f, 0xdb, 0x5d, 0xe6, 0x80,
-+		    0xa8, 0x00, 0xac, 0x52, 0x1f, 0x31, 0x8e, 0x23 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - public key >= p */
-+{
-+	.secret = (u8[32]){ 0xc0, 0x4c, 0x5b, 0xae, 0xfa, 0x83, 0x02, 0xdd,
-+		     0xde, 0xd6, 0xa4, 0xbb, 0x95, 0x77, 0x61, 0xb4,
-+		     0xeb, 0x97, 0xae, 0xfa, 0x4f, 0xc3, 0xb8, 0x04,
-+		     0x30, 0x85, 0xf9, 0x6a, 0x56, 0x59, 0xb3, 0xa5 },
-+	.b_public = (u8[32]){ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+	.expected_ss = (u8[32]){ 0x29, 0xae, 0x8b, 0xc7, 0x3e, 0x9b, 0x10, 0xa0,
-+		    0x8b, 0x4f, 0x68, 0x1c, 0x43, 0xc3, 0xe0, 0xac,
-+		    0x1a, 0x17, 0x1d, 0x31, 0xb3, 0x8f, 0x1a, 0x48,
-+		    0xef, 0xba, 0x29, 0xae, 0x63, 0x9e, 0xa1, 0x34 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - RFC 7748 */
-+{
-+	.secret = (u8[32]){ 0xa0, 0x46, 0xe3, 0x6b, 0xf0, 0x52, 0x7c, 0x9d,
-+		     0x3b, 0x16, 0x15, 0x4b, 0x82, 0x46, 0x5e, 0xdd,
-+		     0x62, 0x14, 0x4c, 0x0a, 0xc1, 0xfc, 0x5a, 0x18,
-+		     0x50, 0x6a, 0x22, 0x44, 0xba, 0x44, 0x9a, 0x44 },
-+	.b_public = (u8[32]){ 0xe6, 0xdb, 0x68, 0x67, 0x58, 0x30, 0x30, 0xdb,
-+		    0x35, 0x94, 0xc1, 0xa4, 0x24, 0xb1, 0x5f, 0x7c,
-+		    0x72, 0x66, 0x24, 0xec, 0x26, 0xb3, 0x35, 0x3b,
-+		    0x10, 0xa9, 0x03, 0xa6, 0xd0, 0xab, 0x1c, 0x4c },
-+	.expected_ss = (u8[32]){ 0xc3, 0xda, 0x55, 0x37, 0x9d, 0xe9, 0xc6, 0x90,
-+		    0x8e, 0x94, 0xea, 0x4d, 0xf2, 0x8d, 0x08, 0x4f,
-+		    0x32, 0xec, 0xcf, 0x03, 0x49, 0x1c, 0x71, 0xf7,
-+		    0x54, 0xb4, 0x07, 0x55, 0x77, 0xa2, 0x85, 0x52 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - RFC 7748 */
-+{
-+	.secret = (u8[32]){ 0x48, 0x66, 0xe9, 0xd4, 0xd1, 0xb4, 0x67, 0x3c,
-+		     0x5a, 0xd2, 0x26, 0x91, 0x95, 0x7d, 0x6a, 0xf5,
-+		     0xc1, 0x1b, 0x64, 0x21, 0xe0, 0xea, 0x01, 0xd4,
-+		     0x2c, 0xa4, 0x16, 0x9e, 0x79, 0x18, 0xba, 0x4d },
-+	.b_public = (u8[32]){ 0xe5, 0x21, 0x0f, 0x12, 0x78, 0x68, 0x11, 0xd3,
-+		    0xf4, 0xb7, 0x95, 0x9d, 0x05, 0x38, 0xae, 0x2c,
-+		    0x31, 0xdb, 0xe7, 0x10, 0x6f, 0xc0, 0x3c, 0x3e,
-+		    0xfc, 0x4c, 0xd5, 0x49, 0xc7, 0x15, 0xa4, 0x13 },
-+	.expected_ss = (u8[32]){ 0x95, 0xcb, 0xde, 0x94, 0x76, 0xe8, 0x90, 0x7d,
-+		    0x7a, 0xad, 0xe4, 0x5c, 0xb4, 0xb8, 0x73, 0xf8,
-+		    0x8b, 0x59, 0x5a, 0x68, 0x79, 0x9f, 0xa1, 0x52,
-+		    0xe6, 0xf8, 0xf7, 0x64, 0x7a, 0xac, 0x79, 0x57 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for shared secret */
-+{
-+	.secret = (u8[32]){ 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+		     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+		     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+		     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+	.b_public = (u8[32]){ 0x0a, 0xb4, 0xe7, 0x63, 0x80, 0xd8, 0x4d, 0xde,
-+		    0x4f, 0x68, 0x33, 0xc5, 0x8f, 0x2a, 0x9f, 0xb8,
-+		    0xf8, 0x3b, 0xb0, 0x16, 0x9b, 0x17, 0x2b, 0xe4,
-+		    0xb6, 0xe0, 0x59, 0x28, 0x87, 0x74, 0x1a, 0x36 },
-+	.expected_ss = (u8[32]){ 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for shared secret */
-+{
-+	.secret = (u8[32]){ 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+		     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+		     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+		     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+	.b_public = (u8[32]){ 0x89, 0xe1, 0x0d, 0x57, 0x01, 0xb4, 0x33, 0x7d,
-+		    0x2d, 0x03, 0x21, 0x81, 0x53, 0x8b, 0x10, 0x64,
-+		    0xbd, 0x40, 0x84, 0x40, 0x1c, 0xec, 0xa1, 0xfd,
-+		    0x12, 0x66, 0x3a, 0x19, 0x59, 0x38, 0x80, 0x00 },
-+	.expected_ss = (u8[32]){ 0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for shared secret */
-+{
-+	.secret = (u8[32]){ 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+		     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+		     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+		     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+	.b_public = (u8[32]){ 0x2b, 0x55, 0xd3, 0xaa, 0x4a, 0x8f, 0x80, 0xc8,
-+		    0xc0, 0xb2, 0xae, 0x5f, 0x93, 0x3e, 0x85, 0xaf,
-+		    0x49, 0xbe, 0xac, 0x36, 0xc2, 0xfa, 0x73, 0x94,
-+		    0xba, 0xb7, 0x6c, 0x89, 0x33, 0xf8, 0xf8, 0x1d },
-+	.expected_ss = (u8[32]){ 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for shared secret */
-+{
-+	.secret = (u8[32]){ 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+		     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+		     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+		     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+	.b_public = (u8[32]){ 0x63, 0xe5, 0xb1, 0xfe, 0x96, 0x01, 0xfe, 0x84,
-+		    0x38, 0x5d, 0x88, 0x66, 0xb0, 0x42, 0x12, 0x62,
-+		    0xf7, 0x8f, 0xbf, 0xa5, 0xaf, 0xf9, 0x58, 0x5e,
-+		    0x62, 0x66, 0x79, 0xb1, 0x85, 0x47, 0xd9, 0x59 },
-+	.expected_ss = (u8[32]){ 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for shared secret */
-+{
-+	.secret = (u8[32]){ 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+		     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+		     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+		     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+	.b_public = (u8[32]){ 0xe4, 0x28, 0xf3, 0xda, 0xc1, 0x78, 0x09, 0xf8,
-+		    0x27, 0xa5, 0x22, 0xce, 0x32, 0x35, 0x50, 0x58,
-+		    0xd0, 0x73, 0x69, 0x36, 0x4a, 0xa7, 0x89, 0x02,
-+		    0xee, 0x10, 0x13, 0x9b, 0x9f, 0x9d, 0xd6, 0x53 },
-+	.expected_ss = (u8[32]){ 0xfc, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for shared secret */
-+{
-+	.secret = (u8[32]){ 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+		     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+		     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+		     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+	.b_public = (u8[32]){ 0xb3, 0xb5, 0x0e, 0x3e, 0xd3, 0xa4, 0x07, 0xb9,
-+		    0x5d, 0xe9, 0x42, 0xef, 0x74, 0x57, 0x5b, 0x5a,
-+		    0xb8, 0xa1, 0x0c, 0x09, 0xee, 0x10, 0x35, 0x44,
-+		    0xd6, 0x0b, 0xdf, 0xed, 0x81, 0x38, 0xab, 0x2b },
-+	.expected_ss = (u8[32]){ 0xf9, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for shared secret */
-+{
-+	.secret = (u8[32]){ 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+		     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+		     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+		     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+	.b_public = (u8[32]){ 0x21, 0x3f, 0xff, 0xe9, 0x3d, 0x5e, 0xa8, 0xcd,
-+		    0x24, 0x2e, 0x46, 0x28, 0x44, 0x02, 0x99, 0x22,
-+		    0xc4, 0x3c, 0x77, 0xc9, 0xe3, 0xe4, 0x2f, 0x56,
-+		    0x2f, 0x48, 0x5d, 0x24, 0xc5, 0x01, 0xa2, 0x0b },
-+	.expected_ss = (u8[32]){ 0xf3, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for shared secret */
-+{
-+	.secret = (u8[32]){ 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+		     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+		     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+		     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+	.b_public = (u8[32]){ 0x91, 0xb2, 0x32, 0xa1, 0x78, 0xb3, 0xcd, 0x53,
-+		    0x09, 0x32, 0x44, 0x1e, 0x61, 0x39, 0x41, 0x8f,
-+		    0x72, 0x17, 0x22, 0x92, 0xf1, 0xda, 0x4c, 0x18,
-+		    0x34, 0xfc, 0x5e, 0xbf, 0xef, 0xb5, 0x1e, 0x3f },
-+	.expected_ss = (u8[32]){ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for shared secret */
-+{
-+	.secret = (u8[32]){ 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+		     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+		     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+		     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+	.b_public = (u8[32]){ 0x04, 0x5c, 0x6e, 0x11, 0xc5, 0xd3, 0x32, 0x55,
-+		    0x6c, 0x78, 0x22, 0xfe, 0x94, 0xeb, 0xf8, 0x9b,
-+		    0x56, 0xa3, 0x87, 0x8d, 0xc2, 0x7c, 0xa0, 0x79,
-+		    0x10, 0x30, 0x58, 0x84, 0x9f, 0xab, 0xcb, 0x4f },
-+	.expected_ss = (u8[32]){ 0xe5, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for shared secret */
-+{
-+	.secret = (u8[32]){ 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+		     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+		     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+		     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+	.b_public = (u8[32]){ 0x1c, 0xa2, 0x19, 0x0b, 0x71, 0x16, 0x35, 0x39,
-+		    0x06, 0x3c, 0x35, 0x77, 0x3b, 0xda, 0x0c, 0x9c,
-+		    0x92, 0x8e, 0x91, 0x36, 0xf0, 0x62, 0x0a, 0xeb,
-+		    0x09, 0x3f, 0x09, 0x91, 0x97, 0xb7, 0xf7, 0x4e },
-+	.expected_ss = (u8[32]){ 0xe3, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for shared secret */
-+{
-+	.secret = (u8[32]){ 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+		     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+		     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+		     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+	.b_public = (u8[32]){ 0xf7, 0x6e, 0x90, 0x10, 0xac, 0x33, 0xc5, 0x04,
-+		    0x3b, 0x2d, 0x3b, 0x76, 0xa8, 0x42, 0x17, 0x10,
-+		    0x00, 0xc4, 0x91, 0x62, 0x22, 0xe9, 0xe8, 0x58,
-+		    0x97, 0xa0, 0xae, 0xc7, 0xf6, 0x35, 0x0b, 0x3c },
-+	.expected_ss = (u8[32]){ 0xdd, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for shared secret */
-+{
-+	.secret = (u8[32]){ 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+		     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+		     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+		     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+	.b_public = (u8[32]){ 0xbb, 0x72, 0x68, 0x8d, 0x8f, 0x8a, 0xa7, 0xa3,
-+		    0x9c, 0xd6, 0x06, 0x0c, 0xd5, 0xc8, 0x09, 0x3c,
-+		    0xde, 0xc6, 0xfe, 0x34, 0x19, 0x37, 0xc3, 0x88,
-+		    0x6a, 0x99, 0x34, 0x6c, 0xd0, 0x7f, 0xaa, 0x55 },
-+	.expected_ss = (u8[32]){ 0xdb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for shared secret */
-+{
-+	.secret = (u8[32]){ 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+		     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+		     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+		     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+	.b_public = (u8[32]){ 0x88, 0xfd, 0xde, 0xa1, 0x93, 0x39, 0x1c, 0x6a,
-+		    0x59, 0x33, 0xef, 0x9b, 0x71, 0x90, 0x15, 0x49,
-+		    0x44, 0x72, 0x05, 0xaa, 0xe9, 0xda, 0x92, 0x8a,
-+		    0x6b, 0x91, 0xa3, 0x52, 0xba, 0x10, 0xf4, 0x1f },
-+	.expected_ss = (u8[32]){ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - edge case for shared secret */
-+{
-+	.secret = (u8[32]){ 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+		     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+		     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+		     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+	.b_public = (u8[32]){ 0x30, 0x3b, 0x39, 0x2f, 0x15, 0x31, 0x16, 0xca,
-+		    0xd9, 0xcc, 0x68, 0x2a, 0x00, 0xcc, 0xc4, 0x4c,
-+		    0x95, 0xff, 0x0d, 0x3b, 0xbe, 0x56, 0x8b, 0xeb,
-+		    0x6c, 0x4e, 0x73, 0x9b, 0xaf, 0xdc, 0x2c, 0x68 },
-+	.expected_ss = (u8[32]){ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - checking for overflow */
-+{
-+	.secret = (u8[32]){ 0xc8, 0x17, 0x24, 0x70, 0x40, 0x00, 0xb2, 0x6d,
-+		     0x31, 0x70, 0x3c, 0xc9, 0x7e, 0x3a, 0x37, 0x8d,
-+		     0x56, 0xfa, 0xd8, 0x21, 0x93, 0x61, 0xc8, 0x8c,
-+		     0xca, 0x8b, 0xd7, 0xc5, 0x71, 0x9b, 0x12, 0xb2 },
-+	.b_public = (u8[32]){ 0xfd, 0x30, 0x0a, 0xeb, 0x40, 0xe1, 0xfa, 0x58,
-+		    0x25, 0x18, 0x41, 0x2b, 0x49, 0xb2, 0x08, 0xa7,
-+		    0x84, 0x2b, 0x1e, 0x1f, 0x05, 0x6a, 0x04, 0x01,
-+		    0x78, 0xea, 0x41, 0x41, 0x53, 0x4f, 0x65, 0x2d },
-+	.expected_ss = (u8[32]){ 0xb7, 0x34, 0x10, 0x5d, 0xc2, 0x57, 0x58, 0x5d,
-+		    0x73, 0xb5, 0x66, 0xcc, 0xb7, 0x6f, 0x06, 0x27,
-+		    0x95, 0xcc, 0xbe, 0xc8, 0x91, 0x28, 0xe5, 0x2b,
-+		    0x02, 0xf3, 0xe5, 0x96, 0x39, 0xf1, 0x3c, 0x46 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - checking for overflow */
-+{
-+	.secret = (u8[32]){ 0xc8, 0x17, 0x24, 0x70, 0x40, 0x00, 0xb2, 0x6d,
-+		     0x31, 0x70, 0x3c, 0xc9, 0x7e, 0x3a, 0x37, 0x8d,
-+		     0x56, 0xfa, 0xd8, 0x21, 0x93, 0x61, 0xc8, 0x8c,
-+		     0xca, 0x8b, 0xd7, 0xc5, 0x71, 0x9b, 0x12, 0xb2 },
-+	.b_public = (u8[32]){ 0xc8, 0xef, 0x79, 0xb5, 0x14, 0xd7, 0x68, 0x26,
-+		    0x77, 0xbc, 0x79, 0x31, 0xe0, 0x6e, 0xe5, 0xc2,
-+		    0x7c, 0x9b, 0x39, 0x2b, 0x4a, 0xe9, 0x48, 0x44,
-+		    0x73, 0xf5, 0x54, 0xe6, 0x67, 0x8e, 0xcc, 0x2e },
-+	.expected_ss = (u8[32]){ 0x64, 0x7a, 0x46, 0xb6, 0xfc, 0x3f, 0x40, 0xd6,
-+		    0x21, 0x41, 0xee, 0x3c, 0xee, 0x70, 0x6b, 0x4d,
-+		    0x7a, 0x92, 0x71, 0x59, 0x3a, 0x7b, 0x14, 0x3e,
-+		    0x8e, 0x2e, 0x22, 0x79, 0x88, 0x3e, 0x45, 0x50 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - checking for overflow */
-+{
-+	.secret = (u8[32]){ 0xc8, 0x17, 0x24, 0x70, 0x40, 0x00, 0xb2, 0x6d,
-+		     0x31, 0x70, 0x3c, 0xc9, 0x7e, 0x3a, 0x37, 0x8d,
-+		     0x56, 0xfa, 0xd8, 0x21, 0x93, 0x61, 0xc8, 0x8c,
-+		     0xca, 0x8b, 0xd7, 0xc5, 0x71, 0x9b, 0x12, 0xb2 },
-+	.b_public = (u8[32]){ 0x64, 0xae, 0xac, 0x25, 0x04, 0x14, 0x48, 0x61,
-+		    0x53, 0x2b, 0x7b, 0xbc, 0xb6, 0xc8, 0x7d, 0x67,
-+		    0xdd, 0x4c, 0x1f, 0x07, 0xeb, 0xc2, 0xe0, 0x6e,
-+		    0xff, 0xb9, 0x5a, 0xec, 0xc6, 0x17, 0x0b, 0x2c },
-+	.expected_ss = (u8[32]){ 0x4f, 0xf0, 0x3d, 0x5f, 0xb4, 0x3c, 0xd8, 0x65,
-+		    0x7a, 0x3c, 0xf3, 0x7c, 0x13, 0x8c, 0xad, 0xce,
-+		    0xcc, 0xe5, 0x09, 0xe4, 0xeb, 0xa0, 0x89, 0xd0,
-+		    0xef, 0x40, 0xb4, 0xe4, 0xfb, 0x94, 0x61, 0x55 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - checking for overflow */
-+{
-+	.secret = (u8[32]){ 0xc8, 0x17, 0x24, 0x70, 0x40, 0x00, 0xb2, 0x6d,
-+		     0x31, 0x70, 0x3c, 0xc9, 0x7e, 0x3a, 0x37, 0x8d,
-+		     0x56, 0xfa, 0xd8, 0x21, 0x93, 0x61, 0xc8, 0x8c,
-+		     0xca, 0x8b, 0xd7, 0xc5, 0x71, 0x9b, 0x12, 0xb2 },
-+	.b_public = (u8[32]){ 0xbf, 0x68, 0xe3, 0x5e, 0x9b, 0xdb, 0x7e, 0xee,
-+		    0x1b, 0x50, 0x57, 0x02, 0x21, 0x86, 0x0f, 0x5d,
-+		    0xcd, 0xad, 0x8a, 0xcb, 0xab, 0x03, 0x1b, 0x14,
-+		    0x97, 0x4c, 0xc4, 0x90, 0x13, 0xc4, 0x98, 0x31 },
-+	.expected_ss = (u8[32]){ 0x21, 0xce, 0xe5, 0x2e, 0xfd, 0xbc, 0x81, 0x2e,
-+		    0x1d, 0x02, 0x1a, 0x4a, 0xf1, 0xe1, 0xd8, 0xbc,
-+		    0x4d, 0xb3, 0xc4, 0x00, 0xe4, 0xd2, 0xa2, 0xc5,
-+		    0x6a, 0x39, 0x26, 0xdb, 0x4d, 0x99, 0xc6, 0x5b },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - checking for overflow */
-+{
-+	.secret = (u8[32]){ 0xc8, 0x17, 0x24, 0x70, 0x40, 0x00, 0xb2, 0x6d,
-+		     0x31, 0x70, 0x3c, 0xc9, 0x7e, 0x3a, 0x37, 0x8d,
-+		     0x56, 0xfa, 0xd8, 0x21, 0x93, 0x61, 0xc8, 0x8c,
-+		     0xca, 0x8b, 0xd7, 0xc5, 0x71, 0x9b, 0x12, 0xb2 },
-+	.b_public = (u8[32]){ 0x53, 0x47, 0xc4, 0x91, 0x33, 0x1a, 0x64, 0xb4,
-+		    0x3d, 0xdc, 0x68, 0x30, 0x34, 0xe6, 0x77, 0xf5,
-+		    0x3d, 0xc3, 0x2b, 0x52, 0xa5, 0x2a, 0x57, 0x7c,
-+		    0x15, 0xa8, 0x3b, 0xf2, 0x98, 0xe9, 0x9f, 0x19 },
-+	.expected_ss = (u8[32]){ 0x18, 0xcb, 0x89, 0xe4, 0xe2, 0x0c, 0x0c, 0x2b,
-+		    0xd3, 0x24, 0x30, 0x52, 0x45, 0x26, 0x6c, 0x93,
-+		    0x27, 0x69, 0x0b, 0xbe, 0x79, 0xac, 0xb8, 0x8f,
-+		    0x5b, 0x8f, 0xb3, 0xf7, 0x4e, 0xca, 0x3e, 0x52 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - private key == -1 (mod order) */
-+{
-+	.secret = (u8[32]){ 0xa0, 0x23, 0xcd, 0xd0, 0x83, 0xef, 0x5b, 0xb8,
-+		     0x2f, 0x10, 0xd6, 0x2e, 0x59, 0xe1, 0x5a, 0x68,
-+		     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50 },
-+	.b_public = (u8[32]){ 0x25, 0x8e, 0x04, 0x52, 0x3b, 0x8d, 0x25, 0x3e,
-+		    0xe6, 0x57, 0x19, 0xfc, 0x69, 0x06, 0xc6, 0x57,
-+		    0x19, 0x2d, 0x80, 0x71, 0x7e, 0xdc, 0x82, 0x8f,
-+		    0xa0, 0xaf, 0x21, 0x68, 0x6e, 0x2f, 0xaa, 0x75 },
-+	.expected_ss = (u8[32]){ 0x25, 0x8e, 0x04, 0x52, 0x3b, 0x8d, 0x25, 0x3e,
-+		    0xe6, 0x57, 0x19, 0xfc, 0x69, 0x06, 0xc6, 0x57,
-+		    0x19, 0x2d, 0x80, 0x71, 0x7e, 0xdc, 0x82, 0x8f,
-+		    0xa0, 0xaf, 0x21, 0x68, 0x6e, 0x2f, 0xaa, 0x75 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+},
-+/* wycheproof - private key == 1 (mod order) on twist */
-+{
-+	.secret = (u8[32]){ 0x58, 0x08, 0x3d, 0xd2, 0x61, 0xad, 0x91, 0xef,
-+		     0xf9, 0x52, 0x32, 0x2e, 0xc8, 0x24, 0xc6, 0x82,
-+		     0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+		     0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x5f },
-+	.b_public = (u8[32]){ 0x2e, 0xae, 0x5e, 0xc3, 0xdd, 0x49, 0x4e, 0x9f,
-+		    0x2d, 0x37, 0xd2, 0x58, 0xf8, 0x73, 0xa8, 0xe6,
-+		    0xe9, 0xd0, 0xdb, 0xd1, 0xe3, 0x83, 0xef, 0x64,
-+		    0xd9, 0x8b, 0xb9, 0x1b, 0x3e, 0x0b, 0xe0, 0x35 },
-+	.expected_ss = (u8[32]){ 0x2e, 0xae, 0x5e, 0xc3, 0xdd, 0x49, 0x4e, 0x9f,
-+		    0x2d, 0x37, 0xd2, 0x58, 0xf8, 0x73, 0xa8, 0xe6,
-+		    0xe9, 0xd0, 0xdb, 0xd1, 0xe3, 0x83, 0xef, 0x64,
-+		    0xd9, 0x8b, 0xb9, 0x1b, 0x3e, 0x0b, 0xe0, 0x35 },
-+	.secret_size = 32,
-+	.b_public_size = 32,
-+	.expected_ss_size = 32,
-+
-+}
-+};
-+
- static const struct kpp_testvec ecdh_tv_template[] = {
- 	{
- #ifndef CONFIG_CRYPTO_FIPS
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0027-crypto-curve25519-implement-generic-KPP-driver.patch b/target/linux/generic/backport-5.4/080-wireguard-0027-crypto-curve25519-implement-generic-KPP-driver.patch
deleted file mode 100644
index d909561690..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0027-crypto-curve25519-implement-generic-KPP-driver.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:34 +0100
-Subject: [PATCH] crypto: curve25519 - implement generic KPP driver
-
-commit ee772cb641135739c1530647391d5a04c39db192 upstream.
-
-Expose the generic Curve25519 library via the crypto API KPP interface.
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- crypto/Kconfig              |  5 +++
- crypto/Makefile             |  1 +
- crypto/curve25519-generic.c | 90 +++++++++++++++++++++++++++++++++++++
- 3 files changed, 96 insertions(+)
- create mode 100644 crypto/curve25519-generic.c
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -264,6 +264,11 @@ config CRYPTO_ECRDSA
- 	  standard algorithms (called GOST algorithms). Only signature verification
- 	  is implemented.
- 
-+config CRYPTO_CURVE25519
-+	tristate "Curve25519 algorithm"
-+	select CRYPTO_KPP
-+	select CRYPTO_LIB_CURVE25519_GENERIC
-+
- comment "Authenticated Encryption with Associated Data"
- 
- config CRYPTO_CCM
---- a/crypto/Makefile
-+++ b/crypto/Makefile
-@@ -167,6 +167,7 @@ obj-$(CONFIG_CRYPTO_ZSTD) += zstd.o
- obj-$(CONFIG_CRYPTO_OFB) += ofb.o
- obj-$(CONFIG_CRYPTO_ECC) += ecc.o
- obj-$(CONFIG_CRYPTO_ESSIV) += essiv.o
-+obj-$(CONFIG_CRYPTO_CURVE25519) += curve25519-generic.o
- 
- ecdh_generic-y += ecdh.o
- ecdh_generic-y += ecdh_helper.o
---- /dev/null
-+++ b/crypto/curve25519-generic.c
-@@ -0,0 +1,90 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+
-+#include <crypto/curve25519.h>
-+#include <crypto/internal/kpp.h>
-+#include <crypto/kpp.h>
-+#include <linux/module.h>
-+#include <linux/scatterlist.h>
-+
-+static int curve25519_set_secret(struct crypto_kpp *tfm, const void *buf,
-+				 unsigned int len)
-+{
-+	u8 *secret = kpp_tfm_ctx(tfm);
-+
-+	if (!len)
-+		curve25519_generate_secret(secret);
-+	else if (len == CURVE25519_KEY_SIZE &&
-+		 crypto_memneq(buf, curve25519_null_point, CURVE25519_KEY_SIZE))
-+		memcpy(secret, buf, CURVE25519_KEY_SIZE);
-+	else
-+		return -EINVAL;
-+	return 0;
-+}
-+
-+static int curve25519_compute_value(struct kpp_request *req)
-+{
-+	struct crypto_kpp *tfm = crypto_kpp_reqtfm(req);
-+	const u8 *secret = kpp_tfm_ctx(tfm);
-+	u8 public_key[CURVE25519_KEY_SIZE];
-+	u8 buf[CURVE25519_KEY_SIZE];
-+	int copied, nbytes;
-+	u8 const *bp;
-+
-+	if (req->src) {
-+		copied = sg_copy_to_buffer(req->src,
-+					   sg_nents_for_len(req->src,
-+							    CURVE25519_KEY_SIZE),
-+					   public_key, CURVE25519_KEY_SIZE);
-+		if (copied != CURVE25519_KEY_SIZE)
-+			return -EINVAL;
-+		bp = public_key;
-+	} else {
-+		bp = curve25519_base_point;
-+	}
-+
-+	curve25519_generic(buf, secret, bp);
-+
-+	/* might want less than we've got */
-+	nbytes = min_t(size_t, CURVE25519_KEY_SIZE, req->dst_len);
-+	copied = sg_copy_from_buffer(req->dst, sg_nents_for_len(req->dst,
-+								nbytes),
-+				     buf, nbytes);
-+	if (copied != nbytes)
-+		return -EINVAL;
-+	return 0;
-+}
-+
-+static unsigned int curve25519_max_size(struct crypto_kpp *tfm)
-+{
-+	return CURVE25519_KEY_SIZE;
-+}
-+
-+static struct kpp_alg curve25519_alg = {
-+	.base.cra_name		= "curve25519",
-+	.base.cra_driver_name	= "curve25519-generic",
-+	.base.cra_priority	= 100,
-+	.base.cra_module	= THIS_MODULE,
-+	.base.cra_ctxsize	= CURVE25519_KEY_SIZE,
-+
-+	.set_secret		= curve25519_set_secret,
-+	.generate_public_key	= curve25519_compute_value,
-+	.compute_shared_secret	= curve25519_compute_value,
-+	.max_size		= curve25519_max_size,
-+};
-+
-+static int curve25519_init(void)
-+{
-+	return crypto_register_kpp(&curve25519_alg);
-+}
-+
-+static void curve25519_exit(void)
-+{
-+	crypto_unregister_kpp(&curve25519_alg);
-+}
-+
-+subsys_initcall(curve25519_init);
-+module_exit(curve25519_exit);
-+
-+MODULE_ALIAS_CRYPTO("curve25519");
-+MODULE_ALIAS_CRYPTO("curve25519-generic");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0028-crypto-lib-curve25519-work-around-Clang-stack-spilli.patch b/target/linux/generic/backport-5.4/080-wireguard-0028-crypto-lib-curve25519-work-around-Clang-stack-spilli.patch
deleted file mode 100644
index 36b59c9aae..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0028-crypto-lib-curve25519-work-around-Clang-stack-spilli.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:35 +0100
-Subject: [PATCH] crypto: lib/curve25519 - work around Clang stack spilling
- issue
-
-commit 660bb8e1f833ea63185fe80fde847e3e42f18e3b upstream.
-
-Arnd reports that the 32-bit generic library code for Curve25119 ends
-up using an excessive amount of stack space when built with Clang:
-
-  lib/crypto/curve25519-fiat32.c:756:6: error: stack frame size
-      of 1384 bytes in function 'curve25519_generic'
-      [-Werror,-Wframe-larger-than=]
-
-Let's give some hints to the compiler regarding which routines should
-not be inlined, to prevent it from running out of registers and spilling
-to the stack. The resulting code performs identically under both GCC
-and Clang, and makes the warning go away.
-
-Suggested-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- lib/crypto/curve25519-fiat32.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/lib/crypto/curve25519-fiat32.c
-+++ b/lib/crypto/curve25519-fiat32.c
-@@ -223,7 +223,7 @@ static __always_inline void fe_1(fe *h)
- 	h->v[0] = 1;
- }
- 
--static void fe_add_impl(u32 out[10], const u32 in1[10], const u32 in2[10])
-+static noinline void fe_add_impl(u32 out[10], const u32 in1[10], const u32 in2[10])
- {
- 	{ const u32 x20 = in1[9];
- 	{ const u32 x21 = in1[8];
-@@ -266,7 +266,7 @@ static __always_inline void fe_add(fe_lo
- 	fe_add_impl(h->v, f->v, g->v);
- }
- 
--static void fe_sub_impl(u32 out[10], const u32 in1[10], const u32 in2[10])
-+static noinline void fe_sub_impl(u32 out[10], const u32 in1[10], const u32 in2[10])
- {
- 	{ const u32 x20 = in1[9];
- 	{ const u32 x21 = in1[8];
-@@ -309,7 +309,7 @@ static __always_inline void fe_sub(fe_lo
- 	fe_sub_impl(h->v, f->v, g->v);
- }
- 
--static void fe_mul_impl(u32 out[10], const u32 in1[10], const u32 in2[10])
-+static noinline void fe_mul_impl(u32 out[10], const u32 in1[10], const u32 in2[10])
- {
- 	{ const u32 x20 = in1[9];
- 	{ const u32 x21 = in1[8];
-@@ -441,7 +441,7 @@ fe_mul_tll(fe *h, const fe_loose *f, con
- 	fe_mul_impl(h->v, f->v, g->v);
- }
- 
--static void fe_sqr_impl(u32 out[10], const u32 in1[10])
-+static noinline void fe_sqr_impl(u32 out[10], const u32 in1[10])
- {
- 	{ const u32 x17 = in1[9];
- 	{ const u32 x18 = in1[8];
-@@ -619,7 +619,7 @@ static __always_inline void fe_invert(fe
-  *
-  * Preconditions: b in {0,1}
-  */
--static __always_inline void fe_cswap(fe *f, fe *g, unsigned int b)
-+static noinline void fe_cswap(fe *f, fe *g, unsigned int b)
- {
- 	unsigned i;
- 	b = 0 - b;
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0029-crypto-curve25519-x86_64-library-and-KPP-implementat.patch b/target/linux/generic/backport-5.4/080-wireguard-0029-crypto-curve25519-x86_64-library-and-KPP-implementat.patch
deleted file mode 100644
index 49fd970767..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0029-crypto-curve25519-x86_64-library-and-KPP-implementat.patch
+++ /dev/null
@@ -1,2536 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 8 Nov 2019 13:22:36 +0100
-Subject: [PATCH] crypto: curve25519 - x86_64 library and KPP implementations
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-commit bb611bdfd6be34d9f822c73305fcc83720499d38 upstream.
-
-This implementation is the fastest available x86_64 implementation, and
-unlike Sandy2x, it doesn't requie use of the floating point registers at
-all. Instead it makes use of BMI2 and ADX, available on recent
-microarchitectures. The implementation was written by Armando
-Faz-Hernández with contributions (upstream) from Samuel Neves and me,
-in addition to further changes in the kernel implementation from us.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
-Co-developed-by: Samuel Neves <sneves@dei.uc.pt>
-[ardb: - move to arch/x86/crypto
-       - wire into lib/crypto framework
-       - implement crypto API KPP hooks ]
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/Makefile            |    1 +
- arch/x86/crypto/curve25519-x86_64.c | 2475 +++++++++++++++++++++++++++
- crypto/Kconfig                      |    6 +
- 3 files changed, 2482 insertions(+)
- create mode 100644 arch/x86/crypto/curve25519-x86_64.c
-
---- a/arch/x86/crypto/Makefile
-+++ b/arch/x86/crypto/Makefile
-@@ -39,6 +39,7 @@ obj-$(CONFIG_CRYPTO_AEGIS128_AESNI_SSE2)
- 
- obj-$(CONFIG_CRYPTO_NHPOLY1305_SSE2) += nhpoly1305-sse2.o
- obj-$(CONFIG_CRYPTO_NHPOLY1305_AVX2) += nhpoly1305-avx2.o
-+obj-$(CONFIG_CRYPTO_CURVE25519_X86) += curve25519-x86_64.o
- 
- # These modules require assembler to support AVX.
- ifeq ($(avx_supported),yes)
---- /dev/null
-+++ b/arch/x86/crypto/curve25519-x86_64.c
-@@ -0,0 +1,2475 @@
-+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
-+/*
-+ * Copyright (c) 2017 Armando Faz <armfazh@ic.unicamp.br>. All Rights Reserved.
-+ * Copyright (C) 2018-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ * Copyright (C) 2018 Samuel Neves <sneves@dei.uc.pt>. All Rights Reserved.
-+ */
-+
-+#include <crypto/curve25519.h>
-+#include <crypto/internal/kpp.h>
-+
-+#include <linux/types.h>
-+#include <linux/jump_label.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+
-+#include <asm/cpufeature.h>
-+#include <asm/processor.h>
-+
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(curve25519_use_bmi2);
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(curve25519_use_adx);
-+
-+enum { NUM_WORDS_ELTFP25519 = 4 };
-+typedef __aligned(32) u64 eltfp25519_1w[NUM_WORDS_ELTFP25519];
-+typedef __aligned(32) u64 eltfp25519_1w_buffer[2 * NUM_WORDS_ELTFP25519];
-+
-+#define mul_eltfp25519_1w_adx(c, a, b) do { \
-+	mul_256x256_integer_adx(m.buffer, a, b); \
-+	red_eltfp25519_1w_adx(c, m.buffer); \
-+} while (0)
-+
-+#define mul_eltfp25519_1w_bmi2(c, a, b) do { \
-+	mul_256x256_integer_bmi2(m.buffer, a, b); \
-+	red_eltfp25519_1w_bmi2(c, m.buffer); \
-+} while (0)
-+
-+#define sqr_eltfp25519_1w_adx(a) do { \
-+	sqr_256x256_integer_adx(m.buffer, a); \
-+	red_eltfp25519_1w_adx(a, m.buffer); \
-+} while (0)
-+
-+#define sqr_eltfp25519_1w_bmi2(a) do { \
-+	sqr_256x256_integer_bmi2(m.buffer, a); \
-+	red_eltfp25519_1w_bmi2(a, m.buffer); \
-+} while (0)
-+
-+#define mul_eltfp25519_2w_adx(c, a, b) do { \
-+	mul2_256x256_integer_adx(m.buffer, a, b); \
-+	red_eltfp25519_2w_adx(c, m.buffer); \
-+} while (0)
-+
-+#define mul_eltfp25519_2w_bmi2(c, a, b) do { \
-+	mul2_256x256_integer_bmi2(m.buffer, a, b); \
-+	red_eltfp25519_2w_bmi2(c, m.buffer); \
-+} while (0)
-+
-+#define sqr_eltfp25519_2w_adx(a) do { \
-+	sqr2_256x256_integer_adx(m.buffer, a); \
-+	red_eltfp25519_2w_adx(a, m.buffer); \
-+} while (0)
-+
-+#define sqr_eltfp25519_2w_bmi2(a) do { \
-+	sqr2_256x256_integer_bmi2(m.buffer, a); \
-+	red_eltfp25519_2w_bmi2(a, m.buffer); \
-+} while (0)
-+
-+#define sqrn_eltfp25519_1w_adx(a, times) do { \
-+	int ____counter = (times); \
-+	while (____counter-- > 0) \
-+		sqr_eltfp25519_1w_adx(a); \
-+} while (0)
-+
-+#define sqrn_eltfp25519_1w_bmi2(a, times) do { \
-+	int ____counter = (times); \
-+	while (____counter-- > 0) \
-+		sqr_eltfp25519_1w_bmi2(a); \
-+} while (0)
-+
-+#define copy_eltfp25519_1w(C, A) do { \
-+	(C)[0] = (A)[0]; \
-+	(C)[1] = (A)[1]; \
-+	(C)[2] = (A)[2]; \
-+	(C)[3] = (A)[3]; \
-+} while (0)
-+
-+#define setzero_eltfp25519_1w(C) do { \
-+	(C)[0] = 0; \
-+	(C)[1] = 0; \
-+	(C)[2] = 0; \
-+	(C)[3] = 0; \
-+} while (0)
-+
-+__aligned(32) static const u64 table_ladder_8k[252 * NUM_WORDS_ELTFP25519] = {
-+	/*   1 */ 0xfffffffffffffff3UL, 0xffffffffffffffffUL,
-+		  0xffffffffffffffffUL, 0x5fffffffffffffffUL,
-+	/*   2 */ 0x6b8220f416aafe96UL, 0x82ebeb2b4f566a34UL,
-+		  0xd5a9a5b075a5950fUL, 0x5142b2cf4b2488f4UL,
-+	/*   3 */ 0x6aaebc750069680cUL, 0x89cf7820a0f99c41UL,
-+		  0x2a58d9183b56d0f4UL, 0x4b5aca80e36011a4UL,
-+	/*   4 */ 0x329132348c29745dUL, 0xf4a2e616e1642fd7UL,
-+		  0x1e45bb03ff67bc34UL, 0x306912d0f42a9b4aUL,
-+	/*   5 */ 0xff886507e6af7154UL, 0x04f50e13dfeec82fUL,
-+		  0xaa512fe82abab5ceUL, 0x174e251a68d5f222UL,
-+	/*   6 */ 0xcf96700d82028898UL, 0x1743e3370a2c02c5UL,
-+		  0x379eec98b4e86eaaUL, 0x0c59888a51e0482eUL,
-+	/*   7 */ 0xfbcbf1d699b5d189UL, 0xacaef0d58e9fdc84UL,
-+		  0xc1c20d06231f7614UL, 0x2938218da274f972UL,
-+	/*   8 */ 0xf6af49beff1d7f18UL, 0xcc541c22387ac9c2UL,
-+		  0x96fcc9ef4015c56bUL, 0x69c1627c690913a9UL,
-+	/*   9 */ 0x7a86fd2f4733db0eUL, 0xfdb8c4f29e087de9UL,
-+		  0x095e4b1a8ea2a229UL, 0x1ad7a7c829b37a79UL,
-+	/*  10 */ 0x342d89cad17ea0c0UL, 0x67bedda6cced2051UL,
-+		  0x19ca31bf2bb42f74UL, 0x3df7b4c84980acbbUL,
-+	/*  11 */ 0xa8c6444dc80ad883UL, 0xb91e440366e3ab85UL,
-+		  0xc215cda00164f6d8UL, 0x3d867c6ef247e668UL,
-+	/*  12 */ 0xc7dd582bcc3e658cUL, 0xfd2c4748ee0e5528UL,
-+		  0xa0fd9b95cc9f4f71UL, 0x7529d871b0675ddfUL,
-+	/*  13 */ 0xb8f568b42d3cbd78UL, 0x1233011b91f3da82UL,
-+		  0x2dce6ccd4a7c3b62UL, 0x75e7fc8e9e498603UL,
-+	/*  14 */ 0x2f4f13f1fcd0b6ecUL, 0xf1a8ca1f29ff7a45UL,
-+		  0xc249c1a72981e29bUL, 0x6ebe0dbb8c83b56aUL,
-+	/*  15 */ 0x7114fa8d170bb222UL, 0x65a2dcd5bf93935fUL,
-+		  0xbdc41f68b59c979aUL, 0x2f0eef79a2ce9289UL,
-+	/*  16 */ 0x42ecbf0c083c37ceUL, 0x2930bc09ec496322UL,
-+		  0xf294b0c19cfeac0dUL, 0x3780aa4bedfabb80UL,
-+	/*  17 */ 0x56c17d3e7cead929UL, 0xe7cb4beb2e5722c5UL,
-+		  0x0ce931732dbfe15aUL, 0x41b883c7621052f8UL,
-+	/*  18 */ 0xdbf75ca0c3d25350UL, 0x2936be086eb1e351UL,
-+		  0xc936e03cb4a9b212UL, 0x1d45bf82322225aaUL,
-+	/*  19 */ 0xe81ab1036a024cc5UL, 0xe212201c304c9a72UL,
-+		  0xc5d73fba6832b1fcUL, 0x20ffdb5a4d839581UL,
-+	/*  20 */ 0xa283d367be5d0fadUL, 0x6c2b25ca8b164475UL,
-+		  0x9d4935467caaf22eUL, 0x5166408eee85ff49UL,
-+	/*  21 */ 0x3c67baa2fab4e361UL, 0xb3e433c67ef35cefUL,
-+		  0x5259729241159b1cUL, 0x6a621892d5b0ab33UL,
-+	/*  22 */ 0x20b74a387555cdcbUL, 0x532aa10e1208923fUL,
-+		  0xeaa17b7762281dd1UL, 0x61ab3443f05c44bfUL,
-+	/*  23 */ 0x257a6c422324def8UL, 0x131c6c1017e3cf7fUL,
-+		  0x23758739f630a257UL, 0x295a407a01a78580UL,
-+	/*  24 */ 0xf8c443246d5da8d9UL, 0x19d775450c52fa5dUL,
-+		  0x2afcfc92731bf83dUL, 0x7d10c8e81b2b4700UL,
-+	/*  25 */ 0xc8e0271f70baa20bUL, 0x993748867ca63957UL,
-+		  0x5412efb3cb7ed4bbUL, 0x3196d36173e62975UL,
-+	/*  26 */ 0xde5bcad141c7dffcUL, 0x47cc8cd2b395c848UL,
-+		  0xa34cd942e11af3cbUL, 0x0256dbf2d04ecec2UL,
-+	/*  27 */ 0x875ab7e94b0e667fUL, 0xcad4dd83c0850d10UL,
-+		  0x47f12e8f4e72c79fUL, 0x5f1a87bb8c85b19bUL,
-+	/*  28 */ 0x7ae9d0b6437f51b8UL, 0x12c7ce5518879065UL,
-+		  0x2ade09fe5cf77aeeUL, 0x23a05a2f7d2c5627UL,
-+	/*  29 */ 0x5908e128f17c169aUL, 0xf77498dd8ad0852dUL,
-+		  0x74b4c4ceab102f64UL, 0x183abadd10139845UL,
-+	/*  30 */ 0xb165ba8daa92aaacUL, 0xd5c5ef9599386705UL,
-+		  0xbe2f8f0cf8fc40d1UL, 0x2701e635ee204514UL,
-+	/*  31 */ 0x629fa80020156514UL, 0xf223868764a8c1ceUL,
-+		  0x5b894fff0b3f060eUL, 0x60d9944cf708a3faUL,
-+	/*  32 */ 0xaeea001a1c7a201fUL, 0xebf16a633ee2ce63UL,
-+		  0x6f7709594c7a07e1UL, 0x79b958150d0208cbUL,
-+	/*  33 */ 0x24b55e5301d410e7UL, 0xe3a34edff3fdc84dUL,
-+		  0xd88768e4904032d8UL, 0x131384427b3aaeecUL,
-+	/*  34 */ 0x8405e51286234f14UL, 0x14dc4739adb4c529UL,
-+		  0xb8a2b5b250634ffdUL, 0x2fe2a94ad8a7ff93UL,
-+	/*  35 */ 0xec5c57efe843faddUL, 0x2843ce40f0bb9918UL,
-+		  0xa4b561d6cf3d6305UL, 0x743629bde8fb777eUL,
-+	/*  36 */ 0x343edd46bbaf738fUL, 0xed981828b101a651UL,
-+		  0xa401760b882c797aUL, 0x1fc223e28dc88730UL,
-+	/*  37 */ 0x48604e91fc0fba0eUL, 0xb637f78f052c6fa4UL,
-+		  0x91ccac3d09e9239cUL, 0x23f7eed4437a687cUL,
-+	/*  38 */ 0x5173b1118d9bd800UL, 0x29d641b63189d4a7UL,
-+		  0xfdbf177988bbc586UL, 0x2959894fcad81df5UL,
-+	/*  39 */ 0xaebc8ef3b4bbc899UL, 0x4148995ab26992b9UL,
-+		  0x24e20b0134f92cfbUL, 0x40d158894a05dee8UL,
-+	/*  40 */ 0x46b00b1185af76f6UL, 0x26bac77873187a79UL,
-+		  0x3dc0bf95ab8fff5fUL, 0x2a608bd8945524d7UL,
-+	/*  41 */ 0x26449588bd446302UL, 0x7c4bc21c0388439cUL,
-+		  0x8e98a4f383bd11b2UL, 0x26218d7bc9d876b9UL,
-+	/*  42 */ 0xe3081542997c178aUL, 0x3c2d29a86fb6606fUL,
-+		  0x5c217736fa279374UL, 0x7dde05734afeb1faUL,
-+	/*  43 */ 0x3bf10e3906d42babUL, 0xe4f7803e1980649cUL,
-+		  0xe6053bf89595bf7aUL, 0x394faf38da245530UL,
-+	/*  44 */ 0x7a8efb58896928f4UL, 0xfbc778e9cc6a113cUL,
-+		  0x72670ce330af596fUL, 0x48f222a81d3d6cf7UL,
-+	/*  45 */ 0xf01fce410d72caa7UL, 0x5a20ecc7213b5595UL,
-+		  0x7bc21165c1fa1483UL, 0x07f89ae31da8a741UL,
-+	/*  46 */ 0x05d2c2b4c6830ff9UL, 0xd43e330fc6316293UL,
-+		  0xa5a5590a96d3a904UL, 0x705edb91a65333b6UL,
-+	/*  47 */ 0x048ee15e0bb9a5f7UL, 0x3240cfca9e0aaf5dUL,
-+		  0x8f4b71ceedc4a40bUL, 0x621c0da3de544a6dUL,
-+	/*  48 */ 0x92872836a08c4091UL, 0xce8375b010c91445UL,
-+		  0x8a72eb524f276394UL, 0x2667fcfa7ec83635UL,
-+	/*  49 */ 0x7f4c173345e8752aUL, 0x061b47feee7079a5UL,
-+		  0x25dd9afa9f86ff34UL, 0x3780cef5425dc89cUL,
-+	/*  50 */ 0x1a46035a513bb4e9UL, 0x3e1ef379ac575adaUL,
-+		  0xc78c5f1c5fa24b50UL, 0x321a967634fd9f22UL,
-+	/*  51 */ 0x946707b8826e27faUL, 0x3dca84d64c506fd0UL,
-+		  0xc189218075e91436UL, 0x6d9284169b3b8484UL,
-+	/*  52 */ 0x3a67e840383f2ddfUL, 0x33eec9a30c4f9b75UL,
-+		  0x3ec7c86fa783ef47UL, 0x26ec449fbac9fbc4UL,
-+	/*  53 */ 0x5c0f38cba09b9e7dUL, 0x81168cc762a3478cUL,
-+		  0x3e23b0d306fc121cUL, 0x5a238aa0a5efdcddUL,
-+	/*  54 */ 0x1ba26121c4ea43ffUL, 0x36f8c77f7c8832b5UL,
-+		  0x88fbea0b0adcf99aUL, 0x5ca9938ec25bebf9UL,
-+	/*  55 */ 0xd5436a5e51fccda0UL, 0x1dbc4797c2cd893bUL,
-+		  0x19346a65d3224a08UL, 0x0f5034e49b9af466UL,
-+	/*  56 */ 0xf23c3967a1e0b96eUL, 0xe58b08fa867a4d88UL,
-+		  0xfb2fabc6a7341679UL, 0x2a75381eb6026946UL,
-+	/*  57 */ 0xc80a3be4c19420acUL, 0x66b1f6c681f2b6dcUL,
-+		  0x7cf7036761e93388UL, 0x25abbbd8a660a4c4UL,
-+	/*  58 */ 0x91ea12ba14fd5198UL, 0x684950fc4a3cffa9UL,
-+		  0xf826842130f5ad28UL, 0x3ea988f75301a441UL,
-+	/*  59 */ 0xc978109a695f8c6fUL, 0x1746eb4a0530c3f3UL,
-+		  0x444d6d77b4459995UL, 0x75952b8c054e5cc7UL,
-+	/*  60 */ 0xa3703f7915f4d6aaUL, 0x66c346202f2647d8UL,
-+		  0xd01469df811d644bUL, 0x77fea47d81a5d71fUL,
-+	/*  61 */ 0xc5e9529ef57ca381UL, 0x6eeeb4b9ce2f881aUL,
-+		  0xb6e91a28e8009bd6UL, 0x4b80be3e9afc3fecUL,
-+	/*  62 */ 0x7e3773c526aed2c5UL, 0x1b4afcb453c9a49dUL,
-+		  0xa920bdd7baffb24dUL, 0x7c54699f122d400eUL,
-+	/*  63 */ 0xef46c8e14fa94bc8UL, 0xe0b074ce2952ed5eUL,
-+		  0xbea450e1dbd885d5UL, 0x61b68649320f712cUL,
-+	/*  64 */ 0x8a485f7309ccbdd1UL, 0xbd06320d7d4d1a2dUL,
-+		  0x25232973322dbef4UL, 0x445dc4758c17f770UL,
-+	/*  65 */ 0xdb0434177cc8933cUL, 0xed6fe82175ea059fUL,
-+		  0x1efebefdc053db34UL, 0x4adbe867c65daf99UL,
-+	/*  66 */ 0x3acd71a2a90609dfUL, 0xe5e991856dd04050UL,
-+		  0x1ec69b688157c23cUL, 0x697427f6885cfe4dUL,
-+	/*  67 */ 0xd7be7b9b65e1a851UL, 0xa03d28d522c536ddUL,
-+		  0x28399d658fd2b645UL, 0x49e5b7e17c2641e1UL,
-+	/*  68 */ 0x6f8c3a98700457a4UL, 0x5078f0a25ebb6778UL,
-+		  0xd13c3ccbc382960fUL, 0x2e003258a7df84b1UL,
-+	/*  69 */ 0x8ad1f39be6296a1cUL, 0xc1eeaa652a5fbfb2UL,
-+		  0x33ee0673fd26f3cbUL, 0x59256173a69d2cccUL,
-+	/*  70 */ 0x41ea07aa4e18fc41UL, 0xd9fc19527c87a51eUL,
-+		  0xbdaacb805831ca6fUL, 0x445b652dc916694fUL,
-+	/*  71 */ 0xce92a3a7f2172315UL, 0x1edc282de11b9964UL,
-+		  0xa1823aafe04c314aUL, 0x790a2d94437cf586UL,
-+	/*  72 */ 0x71c447fb93f6e009UL, 0x8922a56722845276UL,
-+		  0xbf70903b204f5169UL, 0x2f7a89891ba319feUL,
-+	/*  73 */ 0x02a08eb577e2140cUL, 0xed9a4ed4427bdcf4UL,
-+		  0x5253ec44e4323cd1UL, 0x3e88363c14e9355bUL,
-+	/*  74 */ 0xaa66c14277110b8cUL, 0x1ae0391610a23390UL,
-+		  0x2030bd12c93fc2a2UL, 0x3ee141579555c7abUL,
-+	/*  75 */ 0x9214de3a6d6e7d41UL, 0x3ccdd88607f17efeUL,
-+		  0x674f1288f8e11217UL, 0x5682250f329f93d0UL,
-+	/*  76 */ 0x6cf00b136d2e396eUL, 0x6e4cf86f1014debfUL,
-+		  0x5930b1b5bfcc4e83UL, 0x047069b48aba16b6UL,
-+	/*  77 */ 0x0d4ce4ab69b20793UL, 0xb24db91a97d0fb9eUL,
-+		  0xcdfa50f54e00d01dUL, 0x221b1085368bddb5UL,
-+	/*  78 */ 0xe7e59468b1e3d8d2UL, 0x53c56563bd122f93UL,
-+		  0xeee8a903e0663f09UL, 0x61efa662cbbe3d42UL,
-+	/*  79 */ 0x2cf8ddddde6eab2aUL, 0x9bf80ad51435f231UL,
-+		  0x5deadacec9f04973UL, 0x29275b5d41d29b27UL,
-+	/*  80 */ 0xcfde0f0895ebf14fUL, 0xb9aab96b054905a7UL,
-+		  0xcae80dd9a1c420fdUL, 0x0a63bf2f1673bbc7UL,
-+	/*  81 */ 0x092f6e11958fbc8cUL, 0x672a81e804822fadUL,
-+		  0xcac8351560d52517UL, 0x6f3f7722c8f192f8UL,
-+	/*  82 */ 0xf8ba90ccc2e894b7UL, 0x2c7557a438ff9f0dUL,
-+		  0x894d1d855ae52359UL, 0x68e122157b743d69UL,
-+	/*  83 */ 0xd87e5570cfb919f3UL, 0x3f2cdecd95798db9UL,
-+		  0x2121154710c0a2ceUL, 0x3c66a115246dc5b2UL,
-+	/*  84 */ 0xcbedc562294ecb72UL, 0xba7143c36a280b16UL,
-+		  0x9610c2efd4078b67UL, 0x6144735d946a4b1eUL,
-+	/*  85 */ 0x536f111ed75b3350UL, 0x0211db8c2041d81bUL,
-+		  0xf93cb1000e10413cUL, 0x149dfd3c039e8876UL,
-+	/*  86 */ 0xd479dde46b63155bUL, 0xb66e15e93c837976UL,
-+		  0xdafde43b1f13e038UL, 0x5fafda1a2e4b0b35UL,
-+	/*  87 */ 0x3600bbdf17197581UL, 0x3972050bbe3cd2c2UL,
-+		  0x5938906dbdd5be86UL, 0x34fce5e43f9b860fUL,
-+	/*  88 */ 0x75a8a4cd42d14d02UL, 0x828dabc53441df65UL,
-+		  0x33dcabedd2e131d3UL, 0x3ebad76fb814d25fUL,
-+	/*  89 */ 0xd4906f566f70e10fUL, 0x5d12f7aa51690f5aUL,
-+		  0x45adb16e76cefcf2UL, 0x01f768aead232999UL,
-+	/*  90 */ 0x2b6cc77b6248febdUL, 0x3cd30628ec3aaffdUL,
-+		  0xce1c0b80d4ef486aUL, 0x4c3bff2ea6f66c23UL,
-+	/*  91 */ 0x3f2ec4094aeaeb5fUL, 0x61b19b286e372ca7UL,
-+		  0x5eefa966de2a701dUL, 0x23b20565de55e3efUL,
-+	/*  92 */ 0xe301ca5279d58557UL, 0x07b2d4ce27c2874fUL,
-+		  0xa532cd8a9dcf1d67UL, 0x2a52fee23f2bff56UL,
-+	/*  93 */ 0x8624efb37cd8663dUL, 0xbbc7ac20ffbd7594UL,
-+		  0x57b85e9c82d37445UL, 0x7b3052cb86a6ec66UL,
-+	/*  94 */ 0x3482f0ad2525e91eUL, 0x2cb68043d28edca0UL,
-+		  0xaf4f6d052e1b003aUL, 0x185f8c2529781b0aUL,
-+	/*  95 */ 0xaa41de5bd80ce0d6UL, 0x9407b2416853e9d6UL,
-+		  0x563ec36e357f4c3aUL, 0x4cc4b8dd0e297bceUL,
-+	/*  96 */ 0xa2fc1a52ffb8730eUL, 0x1811f16e67058e37UL,
-+		  0x10f9a366cddf4ee1UL, 0x72f4a0c4a0b9f099UL,
-+	/*  97 */ 0x8c16c06f663f4ea7UL, 0x693b3af74e970fbaUL,
-+		  0x2102e7f1d69ec345UL, 0x0ba53cbc968a8089UL,
-+	/*  98 */ 0xca3d9dc7fea15537UL, 0x4c6824bb51536493UL,
-+		  0xb9886314844006b1UL, 0x40d2a72ab454cc60UL,
-+	/*  99 */ 0x5936a1b712570975UL, 0x91b9d648debda657UL,
-+		  0x3344094bb64330eaUL, 0x006ba10d12ee51d0UL,
-+	/* 100 */ 0x19228468f5de5d58UL, 0x0eb12f4c38cc05b0UL,
-+		  0xa1039f9dd5601990UL, 0x4502d4ce4fff0e0bUL,
-+	/* 101 */ 0xeb2054106837c189UL, 0xd0f6544c6dd3b93cUL,
-+		  0x40727064c416d74fUL, 0x6e15c6114b502ef0UL,
-+	/* 102 */ 0x4df2a398cfb1a76bUL, 0x11256c7419f2f6b1UL,
-+		  0x4a497962066e6043UL, 0x705b3aab41355b44UL,
-+	/* 103 */ 0x365ef536d797b1d8UL, 0x00076bd622ddf0dbUL,
-+		  0x3bbf33b0e0575a88UL, 0x3777aa05c8e4ca4dUL,
-+	/* 104 */ 0x392745c85578db5fUL, 0x6fda4149dbae5ae2UL,
-+		  0xb1f0b00b8adc9867UL, 0x09963437d36f1da3UL,
-+	/* 105 */ 0x7e824e90a5dc3853UL, 0xccb5f6641f135cbdUL,
-+		  0x6736d86c87ce8fccUL, 0x625f3ce26604249fUL,
-+	/* 106 */ 0xaf8ac8059502f63fUL, 0x0c05e70a2e351469UL,
-+		  0x35292e9c764b6305UL, 0x1a394360c7e23ac3UL,
-+	/* 107 */ 0xd5c6d53251183264UL, 0x62065abd43c2b74fUL,
-+		  0xb5fbf5d03b973f9bUL, 0x13a3da3661206e5eUL,
-+	/* 108 */ 0xc6bd5837725d94e5UL, 0x18e30912205016c5UL,
-+		  0x2088ce1570033c68UL, 0x7fba1f495c837987UL,
-+	/* 109 */ 0x5a8c7423f2f9079dUL, 0x1735157b34023fc5UL,
-+		  0xe4f9b49ad2fab351UL, 0x6691ff72c878e33cUL,
-+	/* 110 */ 0x122c2adedc5eff3eUL, 0xf8dd4bf1d8956cf4UL,
-+		  0xeb86205d9e9e5bdaUL, 0x049b92b9d975c743UL,
-+	/* 111 */ 0xa5379730b0f6c05aUL, 0x72a0ffacc6f3a553UL,
-+		  0xb0032c34b20dcd6dUL, 0x470e9dbc88d5164aUL,
-+	/* 112 */ 0xb19cf10ca237c047UL, 0xb65466711f6c81a2UL,
-+		  0xb3321bd16dd80b43UL, 0x48c14f600c5fbe8eUL,
-+	/* 113 */ 0x66451c264aa6c803UL, 0xb66e3904a4fa7da6UL,
-+		  0xd45f19b0b3128395UL, 0x31602627c3c9bc10UL,
-+	/* 114 */ 0x3120dc4832e4e10dUL, 0xeb20c46756c717f7UL,
-+		  0x00f52e3f67280294UL, 0x566d4fc14730c509UL,
-+	/* 115 */ 0x7e3a5d40fd837206UL, 0xc1e926dc7159547aUL,
-+		  0x216730fba68d6095UL, 0x22e8c3843f69cea7UL,
-+	/* 116 */ 0x33d074e8930e4b2bUL, 0xb6e4350e84d15816UL,
-+		  0x5534c26ad6ba2365UL, 0x7773c12f89f1f3f3UL,
-+	/* 117 */ 0x8cba404da57962aaUL, 0x5b9897a81999ce56UL,
-+		  0x508e862f121692fcUL, 0x3a81907fa093c291UL,
-+	/* 118 */ 0x0dded0ff4725a510UL, 0x10d8cc10673fc503UL,
-+		  0x5b9d151c9f1f4e89UL, 0x32a5c1d5cb09a44cUL,
-+	/* 119 */ 0x1e0aa442b90541fbUL, 0x5f85eb7cc1b485dbUL,
-+		  0xbee595ce8a9df2e5UL, 0x25e496c722422236UL,
-+	/* 120 */ 0x5edf3c46cd0fe5b9UL, 0x34e75a7ed2a43388UL,
-+		  0xe488de11d761e352UL, 0x0e878a01a085545cUL,
-+	/* 121 */ 0xba493c77e021bb04UL, 0x2b4d1843c7df899aUL,
-+		  0x9ea37a487ae80d67UL, 0x67a9958011e41794UL,
-+	/* 122 */ 0x4b58051a6697b065UL, 0x47e33f7d8d6ba6d4UL,
-+		  0xbb4da8d483ca46c1UL, 0x68becaa181c2db0dUL,
-+	/* 123 */ 0x8d8980e90b989aa5UL, 0xf95eb14a2c93c99bUL,
-+		  0x51c6c7c4796e73a2UL, 0x6e228363b5efb569UL,
-+	/* 124 */ 0xc6bbc0b02dd624c8UL, 0x777eb47dec8170eeUL,
-+		  0x3cde15a004cfafa9UL, 0x1dc6bc087160bf9bUL,
-+	/* 125 */ 0x2e07e043eec34002UL, 0x18e9fc677a68dc7fUL,
-+		  0xd8da03188bd15b9aUL, 0x48fbc3bb00568253UL,
-+	/* 126 */ 0x57547d4cfb654ce1UL, 0xd3565b82a058e2adUL,
-+		  0xf63eaf0bbf154478UL, 0x47531ef114dfbb18UL,
-+	/* 127 */ 0xe1ec630a4278c587UL, 0x5507d546ca8e83f3UL,
-+		  0x85e135c63adc0c2bUL, 0x0aa7efa85682844eUL,
-+	/* 128 */ 0x72691ba8b3e1f615UL, 0x32b4e9701fbe3ffaUL,
-+		  0x97b6d92e39bb7868UL, 0x2cfe53dea02e39e8UL,
-+	/* 129 */ 0x687392cd85cd52b0UL, 0x27ff66c910e29831UL,
-+		  0x97134556a9832d06UL, 0x269bb0360a84f8a0UL,
-+	/* 130 */ 0x706e55457643f85cUL, 0x3734a48c9b597d1bUL,
-+		  0x7aee91e8c6efa472UL, 0x5cd6abc198a9d9e0UL,
-+	/* 131 */ 0x0e04de06cb3ce41aUL, 0xd8c6eb893402e138UL,
-+		  0x904659bb686e3772UL, 0x7215c371746ba8c8UL,
-+	/* 132 */ 0xfd12a97eeae4a2d9UL, 0x9514b7516394f2c5UL,
-+		  0x266fd5809208f294UL, 0x5c847085619a26b9UL,
-+	/* 133 */ 0x52985410fed694eaUL, 0x3c905b934a2ed254UL,
-+		  0x10bb47692d3be467UL, 0x063b3d2d69e5e9e1UL,
-+	/* 134 */ 0x472726eedda57debUL, 0xefb6c4ae10f41891UL,
-+		  0x2b1641917b307614UL, 0x117c554fc4f45b7cUL,
-+	/* 135 */ 0xc07cf3118f9d8812UL, 0x01dbd82050017939UL,
-+		  0xd7e803f4171b2827UL, 0x1015e87487d225eaUL,
-+	/* 136 */ 0xc58de3fed23acc4dUL, 0x50db91c294a7be2dUL,
-+		  0x0b94d43d1c9cf457UL, 0x6b1640fa6e37524aUL,
-+	/* 137 */ 0x692f346c5fda0d09UL, 0x200b1c59fa4d3151UL,
-+		  0xb8c46f760777a296UL, 0x4b38395f3ffdfbcfUL,
-+	/* 138 */ 0x18d25e00be54d671UL, 0x60d50582bec8aba6UL,
-+		  0x87ad8f263b78b982UL, 0x50fdf64e9cda0432UL,
-+	/* 139 */ 0x90f567aac578dcf0UL, 0xef1e9b0ef2a3133bUL,
-+		  0x0eebba9242d9de71UL, 0x15473c9bf03101c7UL,
-+	/* 140 */ 0x7c77e8ae56b78095UL, 0xb678e7666e6f078eUL,
-+		  0x2da0b9615348ba1fUL, 0x7cf931c1ff733f0bUL,
-+	/* 141 */ 0x26b357f50a0a366cUL, 0xe9708cf42b87d732UL,
-+		  0xc13aeea5f91cb2c0UL, 0x35d90c991143bb4cUL,
-+	/* 142 */ 0x47c1c404a9a0d9dcUL, 0x659e58451972d251UL,
-+		  0x3875a8c473b38c31UL, 0x1fbd9ed379561f24UL,
-+	/* 143 */ 0x11fabc6fd41ec28dUL, 0x7ef8dfe3cd2a2dcaUL,
-+		  0x72e73b5d8c404595UL, 0x6135fa4954b72f27UL,
-+	/* 144 */ 0xccfc32a2de24b69cUL, 0x3f55698c1f095d88UL,
-+		  0xbe3350ed5ac3f929UL, 0x5e9bf806ca477eebUL,
-+	/* 145 */ 0xe9ce8fb63c309f68UL, 0x5376f63565e1f9f4UL,
-+		  0xd1afcfb35a6393f1UL, 0x6632a1ede5623506UL,
-+	/* 146 */ 0x0b7d6c390c2ded4cUL, 0x56cb3281df04cb1fUL,
-+		  0x66305a1249ecc3c7UL, 0x5d588b60a38ca72aUL,
-+	/* 147 */ 0xa6ecbf78e8e5f42dUL, 0x86eeb44b3c8a3eecUL,
-+		  0xec219c48fbd21604UL, 0x1aaf1af517c36731UL,
-+	/* 148 */ 0xc306a2836769bde7UL, 0x208280622b1e2adbUL,
-+		  0x8027f51ffbff94a6UL, 0x76cfa1ce1124f26bUL,
-+	/* 149 */ 0x18eb00562422abb6UL, 0xf377c4d58f8c29c3UL,
-+		  0x4dbbc207f531561aUL, 0x0253b7f082128a27UL,
-+	/* 150 */ 0x3d1f091cb62c17e0UL, 0x4860e1abd64628a9UL,
-+		  0x52d17436309d4253UL, 0x356f97e13efae576UL,
-+	/* 151 */ 0xd351e11aa150535bUL, 0x3e6b45bb1dd878ccUL,
-+		  0x0c776128bed92c98UL, 0x1d34ae93032885b8UL,
-+	/* 152 */ 0x4ba0488ca85ba4c3UL, 0x985348c33c9ce6ceUL,
-+		  0x66124c6f97bda770UL, 0x0f81a0290654124aUL,
-+	/* 153 */ 0x9ed09ca6569b86fdUL, 0x811009fd18af9a2dUL,
-+		  0xff08d03f93d8c20aUL, 0x52a148199faef26bUL,
-+	/* 154 */ 0x3e03f9dc2d8d1b73UL, 0x4205801873961a70UL,
-+		  0xc0d987f041a35970UL, 0x07aa1f15a1c0d549UL,
-+	/* 155 */ 0xdfd46ce08cd27224UL, 0x6d0a024f934e4239UL,
-+		  0x808a7a6399897b59UL, 0x0a4556e9e13d95a2UL,
-+	/* 156 */ 0xd21a991fe9c13045UL, 0x9b0e8548fe7751b8UL,
-+		  0x5da643cb4bf30035UL, 0x77db28d63940f721UL,
-+	/* 157 */ 0xfc5eeb614adc9011UL, 0x5229419ae8c411ebUL,
-+		  0x9ec3e7787d1dcf74UL, 0x340d053e216e4cb5UL,
-+	/* 158 */ 0xcac7af39b48df2b4UL, 0xc0faec2871a10a94UL,
-+		  0x140a69245ca575edUL, 0x0cf1c37134273a4cUL,
-+	/* 159 */ 0xc8ee306ac224b8a5UL, 0x57eaee7ccb4930b0UL,
-+		  0xa1e806bdaacbe74fUL, 0x7d9a62742eeb657dUL,
-+	/* 160 */ 0x9eb6b6ef546c4830UL, 0x885cca1fddb36e2eUL,
-+		  0xe6b9f383ef0d7105UL, 0x58654fef9d2e0412UL,
-+	/* 161 */ 0xa905c4ffbe0e8e26UL, 0x942de5df9b31816eUL,
-+		  0x497d723f802e88e1UL, 0x30684dea602f408dUL,
-+	/* 162 */ 0x21e5a278a3e6cb34UL, 0xaefb6e6f5b151dc4UL,
-+		  0xb30b8e049d77ca15UL, 0x28c3c9cf53b98981UL,
-+	/* 163 */ 0x287fb721556cdd2aUL, 0x0d317ca897022274UL,
-+		  0x7468c7423a543258UL, 0x4a7f11464eb5642fUL,
-+	/* 164 */ 0xa237a4774d193aa6UL, 0xd865986ea92129a1UL,
-+		  0x24c515ecf87c1a88UL, 0x604003575f39f5ebUL,
-+	/* 165 */ 0x47b9f189570a9b27UL, 0x2b98cede465e4b78UL,
-+		  0x026df551dbb85c20UL, 0x74fcd91047e21901UL,
-+	/* 166 */ 0x13e2a90a23c1bfa3UL, 0x0cb0074e478519f6UL,
-+		  0x5ff1cbbe3af6cf44UL, 0x67fe5438be812dbeUL,
-+	/* 167 */ 0xd13cf64fa40f05b0UL, 0x054dfb2f32283787UL,
-+		  0x4173915b7f0d2aeaUL, 0x482f144f1f610d4eUL,
-+	/* 168 */ 0xf6210201b47f8234UL, 0x5d0ae1929e70b990UL,
-+		  0xdcd7f455b049567cUL, 0x7e93d0f1f0916f01UL,
-+	/* 169 */ 0xdd79cbf18a7db4faUL, 0xbe8391bf6f74c62fUL,
-+		  0x027145d14b8291bdUL, 0x585a73ea2cbf1705UL,
-+	/* 170 */ 0x485ca03e928a0db2UL, 0x10fc01a5742857e7UL,
-+		  0x2f482edbd6d551a7UL, 0x0f0433b5048fdb8aUL,
-+	/* 171 */ 0x60da2e8dd7dc6247UL, 0x88b4c9d38cd4819aUL,
-+		  0x13033ac001f66697UL, 0x273b24fe3b367d75UL,
-+	/* 172 */ 0xc6e8f66a31b3b9d4UL, 0x281514a494df49d5UL,
-+		  0xd1726fdfc8b23da7UL, 0x4b3ae7d103dee548UL,
-+	/* 173 */ 0xc6256e19ce4b9d7eUL, 0xff5c5cf186e3c61cUL,
-+		  0xacc63ca34b8ec145UL, 0x74621888fee66574UL,
-+	/* 174 */ 0x956f409645290a1eUL, 0xef0bf8e3263a962eUL,
-+		  0xed6a50eb5ec2647bUL, 0x0694283a9dca7502UL,
-+	/* 175 */ 0x769b963643a2dcd1UL, 0x42b7c8ea09fc5353UL,
-+		  0x4f002aee13397eabUL, 0x63005e2c19b7d63aUL,
-+	/* 176 */ 0xca6736da63023beaUL, 0x966c7f6db12a99b7UL,
-+		  0xace09390c537c5e1UL, 0x0b696063a1aa89eeUL,
-+	/* 177 */ 0xebb03e97288c56e5UL, 0x432a9f9f938c8be8UL,
-+		  0xa6a5a93d5b717f71UL, 0x1a5fb4c3e18f9d97UL,
-+	/* 178 */ 0x1c94e7ad1c60cdceUL, 0xee202a43fc02c4a0UL,
-+		  0x8dafe4d867c46a20UL, 0x0a10263c8ac27b58UL,
-+	/* 179 */ 0xd0dea9dfe4432a4aUL, 0x856af87bbe9277c5UL,
-+		  0xce8472acc212c71aUL, 0x6f151b6d9bbb1e91UL,
-+	/* 180 */ 0x26776c527ceed56aUL, 0x7d211cb7fbf8faecUL,
-+		  0x37ae66a6fd4609ccUL, 0x1f81b702d2770c42UL,
-+	/* 181 */ 0x2fb0b057eac58392UL, 0xe1dd89fe29744e9dUL,
-+		  0xc964f8eb17beb4f8UL, 0x29571073c9a2d41eUL,
-+	/* 182 */ 0xa948a18981c0e254UL, 0x2df6369b65b22830UL,
-+		  0xa33eb2d75fcfd3c6UL, 0x078cd6ec4199a01fUL,
-+	/* 183 */ 0x4a584a41ad900d2fUL, 0x32142b78e2c74c52UL,
-+		  0x68c4e8338431c978UL, 0x7f69ea9008689fc2UL,
-+	/* 184 */ 0x52f2c81e46a38265UL, 0xfd78072d04a832fdUL,
-+		  0x8cd7d5fa25359e94UL, 0x4de71b7454cc29d2UL,
-+	/* 185 */ 0x42eb60ad1eda6ac9UL, 0x0aad37dfdbc09c3aUL,
-+		  0x81004b71e33cc191UL, 0x44e6be345122803cUL,
-+	/* 186 */ 0x03fe8388ba1920dbUL, 0xf5d57c32150db008UL,
-+		  0x49c8c4281af60c29UL, 0x21edb518de701aeeUL,
-+	/* 187 */ 0x7fb63e418f06dc99UL, 0xa4460d99c166d7b8UL,
-+		  0x24dd5248ce520a83UL, 0x5ec3ad712b928358UL,
-+	/* 188 */ 0x15022a5fbd17930fUL, 0xa4f64a77d82570e3UL,
-+		  0x12bc8d6915783712UL, 0x498194c0fc620abbUL,
-+	/* 189 */ 0x38a2d9d255686c82UL, 0x785c6bd9193e21f0UL,
-+		  0xe4d5c81ab24a5484UL, 0x56307860b2e20989UL,
-+	/* 190 */ 0x429d55f78b4d74c4UL, 0x22f1834643350131UL,
-+		  0x1e60c24598c71fffUL, 0x59f2f014979983efUL,
-+	/* 191 */ 0x46a47d56eb494a44UL, 0x3e22a854d636a18eUL,
-+		  0xb346e15274491c3bUL, 0x2ceafd4e5390cde7UL,
-+	/* 192 */ 0xba8a8538be0d6675UL, 0x4b9074bb50818e23UL,
-+		  0xcbdab89085d304c3UL, 0x61a24fe0e56192c4UL,
-+	/* 193 */ 0xcb7615e6db525bcbUL, 0xdd7d8c35a567e4caUL,
-+		  0xe6b4153acafcdd69UL, 0x2d668e097f3c9766UL,
-+	/* 194 */ 0xa57e7e265ce55ef0UL, 0x5d9f4e527cd4b967UL,
-+		  0xfbc83606492fd1e5UL, 0x090d52beb7c3f7aeUL,
-+	/* 195 */ 0x09b9515a1e7b4d7cUL, 0x1f266a2599da44c0UL,
-+		  0xa1c49548e2c55504UL, 0x7ef04287126f15ccUL,
-+	/* 196 */ 0xfed1659dbd30ef15UL, 0x8b4ab9eec4e0277bUL,
-+		  0x884d6236a5df3291UL, 0x1fd96ea6bf5cf788UL,
-+	/* 197 */ 0x42a161981f190d9aUL, 0x61d849507e6052c1UL,
-+		  0x9fe113bf285a2cd5UL, 0x7c22d676dbad85d8UL,
-+	/* 198 */ 0x82e770ed2bfbd27dUL, 0x4c05b2ece996f5a5UL,
-+		  0xcd40a9c2b0900150UL, 0x5895319213d9bf64UL,
-+	/* 199 */ 0xe7cc5d703fea2e08UL, 0xb50c491258e2188cUL,
-+		  0xcce30baa48205bf0UL, 0x537c659ccfa32d62UL,
-+	/* 200 */ 0x37b6623a98cfc088UL, 0xfe9bed1fa4d6aca4UL,
-+		  0x04d29b8e56a8d1b0UL, 0x725f71c40b519575UL,
-+	/* 201 */ 0x28c7f89cd0339ce6UL, 0x8367b14469ddc18bUL,
-+		  0x883ada83a6a1652cUL, 0x585f1974034d6c17UL,
-+	/* 202 */ 0x89cfb266f1b19188UL, 0xe63b4863e7c35217UL,
-+		  0xd88c9da6b4c0526aUL, 0x3e035c9df0954635UL,
-+	/* 203 */ 0xdd9d5412fb45de9dUL, 0xdd684532e4cff40dUL,
-+		  0x4b5c999b151d671cUL, 0x2d8c2cc811e7f690UL,
-+	/* 204 */ 0x7f54be1d90055d40UL, 0xa464c5df464aaf40UL,
-+		  0x33979624f0e917beUL, 0x2c018dc527356b30UL,
-+	/* 205 */ 0xa5415024e330b3d4UL, 0x73ff3d96691652d3UL,
-+		  0x94ec42c4ef9b59f1UL, 0x0747201618d08e5aUL,
-+	/* 206 */ 0x4d6ca48aca411c53UL, 0x66415f2fcfa66119UL,
-+		  0x9c4dd40051e227ffUL, 0x59810bc09a02f7ebUL,
-+	/* 207 */ 0x2a7eb171b3dc101dUL, 0x441c5ab99ffef68eUL,
-+		  0x32025c9b93b359eaUL, 0x5e8ce0a71e9d112fUL,
-+	/* 208 */ 0xbfcccb92429503fdUL, 0xd271ba752f095d55UL,
-+		  0x345ead5e972d091eUL, 0x18c8df11a83103baUL,
-+	/* 209 */ 0x90cd949a9aed0f4cUL, 0xc5d1f4cb6660e37eUL,
-+		  0xb8cac52d56c52e0bUL, 0x6e42e400c5808e0dUL,
-+	/* 210 */ 0xa3b46966eeaefd23UL, 0x0c4f1f0be39ecdcaUL,
-+		  0x189dc8c9d683a51dUL, 0x51f27f054c09351bUL,
-+	/* 211 */ 0x4c487ccd2a320682UL, 0x587ea95bb3df1c96UL,
-+		  0xc8ccf79e555cb8e8UL, 0x547dc829a206d73dUL,
-+	/* 212 */ 0xb822a6cd80c39b06UL, 0xe96d54732000d4c6UL,
-+		  0x28535b6f91463b4dUL, 0x228f4660e2486e1dUL,
-+	/* 213 */ 0x98799538de8d3abfUL, 0x8cd8330045ebca6eUL,
-+		  0x79952a008221e738UL, 0x4322e1a7535cd2bbUL,
-+	/* 214 */ 0xb114c11819d1801cUL, 0x2016e4d84f3f5ec7UL,
-+		  0xdd0e2df409260f4cUL, 0x5ec362c0ae5f7266UL,
-+	/* 215 */ 0xc0462b18b8b2b4eeUL, 0x7cc8d950274d1afbUL,
-+		  0xf25f7105436b02d2UL, 0x43bbf8dcbff9ccd3UL,
-+	/* 216 */ 0xb6ad1767a039e9dfUL, 0xb0714da8f69d3583UL,
-+		  0x5e55fa18b42931f5UL, 0x4ed5558f33c60961UL,
-+	/* 217 */ 0x1fe37901c647a5ddUL, 0x593ddf1f8081d357UL,
-+		  0x0249a4fd813fd7a6UL, 0x69acca274e9caf61UL,
-+	/* 218 */ 0x047ba3ea330721c9UL, 0x83423fc20e7e1ea0UL,
-+		  0x1df4c0af01314a60UL, 0x09a62dab89289527UL,
-+	/* 219 */ 0xa5b325a49cc6cb00UL, 0xe94b5dc654b56cb6UL,
-+		  0x3be28779adc994a0UL, 0x4296e8f8ba3a4aadUL,
-+	/* 220 */ 0x328689761e451eabUL, 0x2e4d598bff59594aUL,
-+		  0x49b96853d7a7084aUL, 0x4980a319601420a8UL,
-+	/* 221 */ 0x9565b9e12f552c42UL, 0x8a5318db7100fe96UL,
-+		  0x05c90b4d43add0d7UL, 0x538b4cd66a5d4edaUL,
-+	/* 222 */ 0xf4e94fc3e89f039fUL, 0x592c9af26f618045UL,
-+		  0x08a36eb5fd4b9550UL, 0x25fffaf6c2ed1419UL,
-+	/* 223 */ 0x34434459cc79d354UL, 0xeeecbfb4b1d5476bUL,
-+		  0xddeb34a061615d99UL, 0x5129cecceb64b773UL,
-+	/* 224 */ 0xee43215894993520UL, 0x772f9c7cf14c0b3bUL,
-+		  0xd2e2fce306bedad5UL, 0x715f42b546f06a97UL,
-+	/* 225 */ 0x434ecdceda5b5f1aUL, 0x0da17115a49741a9UL,
-+		  0x680bd77c73edad2eUL, 0x487c02354edd9041UL,
-+	/* 226 */ 0xb8efeff3a70ed9c4UL, 0x56a32aa3e857e302UL,
-+		  0xdf3a68bd48a2a5a0UL, 0x07f650b73176c444UL,
-+	/* 227 */ 0xe38b9b1626e0ccb1UL, 0x79e053c18b09fb36UL,
-+		  0x56d90319c9f94964UL, 0x1ca941e7ac9ff5c4UL,
-+	/* 228 */ 0x49c4df29162fa0bbUL, 0x8488cf3282b33305UL,
-+		  0x95dfda14cabb437dUL, 0x3391f78264d5ad86UL,
-+	/* 229 */ 0x729ae06ae2b5095dUL, 0xd58a58d73259a946UL,
-+		  0xe9834262d13921edUL, 0x27fedafaa54bb592UL,
-+	/* 230 */ 0xa99dc5b829ad48bbUL, 0x5f025742499ee260UL,
-+		  0x802c8ecd5d7513fdUL, 0x78ceb3ef3f6dd938UL,
-+	/* 231 */ 0xc342f44f8a135d94UL, 0x7b9edb44828cdda3UL,
-+		  0x9436d11a0537cfe7UL, 0x5064b164ec1ab4c8UL,
-+	/* 232 */ 0x7020eccfd37eb2fcUL, 0x1f31ea3ed90d25fcUL,
-+		  0x1b930d7bdfa1bb34UL, 0x5344467a48113044UL,
-+	/* 233 */ 0x70073170f25e6dfbUL, 0xe385dc1a50114cc8UL,
-+		  0x2348698ac8fc4f00UL, 0x2a77a55284dd40d8UL,
-+	/* 234 */ 0xfe06afe0c98c6ce4UL, 0xc235df96dddfd6e4UL,
-+		  0x1428d01e33bf1ed3UL, 0x785768ec9300bdafUL,
-+	/* 235 */ 0x9702e57a91deb63bUL, 0x61bdb8bfe5ce8b80UL,
-+		  0x645b426f3d1d58acUL, 0x4804a82227a557bcUL,
-+	/* 236 */ 0x8e57048ab44d2601UL, 0x68d6501a4b3a6935UL,
-+		  0xc39c9ec3f9e1c293UL, 0x4172f257d4de63e2UL,
-+	/* 237 */ 0xd368b450330c6401UL, 0x040d3017418f2391UL,
-+		  0x2c34bb6090b7d90dUL, 0x16f649228fdfd51fUL,
-+	/* 238 */ 0xbea6818e2b928ef5UL, 0xe28ccf91cdc11e72UL,
-+		  0x594aaa68e77a36cdUL, 0x313034806c7ffd0fUL,
-+	/* 239 */ 0x8a9d27ac2249bd65UL, 0x19a3b464018e9512UL,
-+		  0xc26ccff352b37ec7UL, 0x056f68341d797b21UL,
-+	/* 240 */ 0x5e79d6757efd2327UL, 0xfabdbcb6553afe15UL,
-+		  0xd3e7222c6eaf5a60UL, 0x7046c76d4dae743bUL,
-+	/* 241 */ 0x660be872b18d4a55UL, 0x19992518574e1496UL,
-+		  0xc103053a302bdcbbUL, 0x3ed8e9800b218e8eUL,
-+	/* 242 */ 0x7b0b9239fa75e03eUL, 0xefe9fb684633c083UL,
-+		  0x98a35fbe391a7793UL, 0x6065510fe2d0fe34UL,
-+	/* 243 */ 0x55cb668548abad0cUL, 0xb4584548da87e527UL,
-+		  0x2c43ecea0107c1ddUL, 0x526028809372de35UL,
-+	/* 244 */ 0x3415c56af9213b1fUL, 0x5bee1a4d017e98dbUL,
-+		  0x13f6b105b5cf709bUL, 0x5ff20e3482b29ab6UL,
-+	/* 245 */ 0x0aa29c75cc2e6c90UL, 0xfc7d73ca3a70e206UL,
-+		  0x899fc38fc4b5c515UL, 0x250386b124ffc207UL,
-+	/* 246 */ 0x54ea28d5ae3d2b56UL, 0x9913149dd6de60ceUL,
-+		  0x16694fc58f06d6c1UL, 0x46b23975eb018fc7UL,
-+	/* 247 */ 0x470a6a0fb4b7b4e2UL, 0x5d92475a8f7253deUL,
-+		  0xabeee5b52fbd3adbUL, 0x7fa20801a0806968UL,
-+	/* 248 */ 0x76f3faf19f7714d2UL, 0xb3e840c12f4660c3UL,
-+		  0x0fb4cd8df212744eUL, 0x4b065a251d3a2dd2UL,
-+	/* 249 */ 0x5cebde383d77cd4aUL, 0x6adf39df882c9cb1UL,
-+		  0xa2dd242eb09af759UL, 0x3147c0e50e5f6422UL,
-+	/* 250 */ 0x164ca5101d1350dbUL, 0xf8d13479c33fc962UL,
-+		  0xe640ce4d13e5da08UL, 0x4bdee0c45061f8baUL,
-+	/* 251 */ 0xd7c46dc1a4edb1c9UL, 0x5514d7b6437fd98aUL,
-+		  0x58942f6bb2a1c00bUL, 0x2dffb2ab1d70710eUL,
-+	/* 252 */ 0xccdfcf2fc18b6d68UL, 0xa8ebcba8b7806167UL,
-+		  0x980697f95e2937e3UL, 0x02fbba1cd0126e8cUL
-+};
-+
-+/* c is two 512-bit products: c0[0:7]=a0[0:3]*b0[0:3] and c1[8:15]=a1[4:7]*b1[4:7]
-+ * a is two 256-bit integers: a0[0:3] and a1[4:7]
-+ * b is two 256-bit integers: b0[0:3] and b1[4:7]
-+ */
-+static void mul2_256x256_integer_adx(u64 *const c, const u64 *const a,
-+				     const u64 *const b)
-+{
-+	asm volatile(
-+		"xorl %%r14d, %%r14d ;"
-+		"movq   (%1), %%rdx; "	/* A[0] */
-+		"mulx   (%2),  %%r8, %%r15; " /* A[0]*B[0] */
-+		"xorl %%r10d, %%r10d ;"
-+		"movq %%r8, (%0) ;"
-+		"mulx  8(%2), %%r10, %%rax; " /* A[0]*B[1] */
-+		"adox %%r10, %%r15 ;"
-+		"mulx 16(%2),  %%r8, %%rbx; " /* A[0]*B[2] */
-+		"adox  %%r8, %%rax ;"
-+		"mulx 24(%2), %%r10, %%rcx; " /* A[0]*B[3] */
-+		"adox %%r10, %%rbx ;"
-+		/******************************************/
-+		"adox %%r14, %%rcx ;"
-+
-+		"movq  8(%1), %%rdx; "	/* A[1] */
-+		"mulx   (%2),  %%r8,  %%r9; " /* A[1]*B[0] */
-+		"adox %%r15,  %%r8 ;"
-+		"movq  %%r8, 8(%0) ;"
-+		"mulx  8(%2), %%r10, %%r11; " /* A[1]*B[1] */
-+		"adox %%r10,  %%r9 ;"
-+		"adcx  %%r9, %%rax ;"
-+		"mulx 16(%2),  %%r8, %%r13; " /* A[1]*B[2] */
-+		"adox  %%r8, %%r11 ;"
-+		"adcx %%r11, %%rbx ;"
-+		"mulx 24(%2), %%r10, %%r15; " /* A[1]*B[3] */
-+		"adox %%r10, %%r13 ;"
-+		"adcx %%r13, %%rcx ;"
-+		/******************************************/
-+		"adox %%r14, %%r15 ;"
-+		"adcx %%r14, %%r15 ;"
-+
-+		"movq 16(%1), %%rdx; " /* A[2] */
-+		"xorl %%r10d, %%r10d ;"
-+		"mulx   (%2),  %%r8,  %%r9; " /* A[2]*B[0] */
-+		"adox %%rax,  %%r8 ;"
-+		"movq %%r8, 16(%0) ;"
-+		"mulx  8(%2), %%r10, %%r11; " /* A[2]*B[1] */
-+		"adox %%r10,  %%r9 ;"
-+		"adcx  %%r9, %%rbx ;"
-+		"mulx 16(%2),  %%r8, %%r13; " /* A[2]*B[2] */
-+		"adox  %%r8, %%r11 ;"
-+		"adcx %%r11, %%rcx ;"
-+		"mulx 24(%2), %%r10, %%rax; " /* A[2]*B[3] */
-+		"adox %%r10, %%r13 ;"
-+		"adcx %%r13, %%r15 ;"
-+		/******************************************/
-+		"adox %%r14, %%rax ;"
-+		"adcx %%r14, %%rax ;"
-+
-+		"movq 24(%1), %%rdx; " /* A[3] */
-+		"xorl %%r10d, %%r10d ;"
-+		"mulx   (%2),  %%r8,  %%r9; " /* A[3]*B[0] */
-+		"adox %%rbx,  %%r8 ;"
-+		"movq %%r8, 24(%0) ;"
-+		"mulx  8(%2), %%r10, %%r11; " /* A[3]*B[1] */
-+		"adox %%r10,  %%r9 ;"
-+		"adcx  %%r9, %%rcx ;"
-+		"movq %%rcx, 32(%0) ;"
-+		"mulx 16(%2),  %%r8, %%r13; " /* A[3]*B[2] */
-+		"adox  %%r8, %%r11 ;"
-+		"adcx %%r11, %%r15 ;"
-+		"movq %%r15, 40(%0) ;"
-+		"mulx 24(%2), %%r10, %%rbx; " /* A[3]*B[3] */
-+		"adox %%r10, %%r13 ;"
-+		"adcx %%r13, %%rax ;"
-+		"movq %%rax, 48(%0) ;"
-+		/******************************************/
-+		"adox %%r14, %%rbx ;"
-+		"adcx %%r14, %%rbx ;"
-+		"movq %%rbx, 56(%0) ;"
-+
-+		"movq 32(%1), %%rdx; "	/* C[0] */
-+		"mulx 32(%2),  %%r8, %%r15; " /* C[0]*D[0] */
-+		"xorl %%r10d, %%r10d ;"
-+		"movq %%r8, 64(%0);"
-+		"mulx 40(%2), %%r10, %%rax; " /* C[0]*D[1] */
-+		"adox %%r10, %%r15 ;"
-+		"mulx 48(%2),  %%r8, %%rbx; " /* C[0]*D[2] */
-+		"adox  %%r8, %%rax ;"
-+		"mulx 56(%2), %%r10, %%rcx; " /* C[0]*D[3] */
-+		"adox %%r10, %%rbx ;"
-+		/******************************************/
-+		"adox %%r14, %%rcx ;"
-+
-+		"movq 40(%1), %%rdx; " /* C[1] */
-+		"xorl %%r10d, %%r10d ;"
-+		"mulx 32(%2),  %%r8,  %%r9; " /* C[1]*D[0] */
-+		"adox %%r15,  %%r8 ;"
-+		"movq  %%r8, 72(%0);"
-+		"mulx 40(%2), %%r10, %%r11; " /* C[1]*D[1] */
-+		"adox %%r10,  %%r9 ;"
-+		"adcx  %%r9, %%rax ;"
-+		"mulx 48(%2),  %%r8, %%r13; " /* C[1]*D[2] */
-+		"adox  %%r8, %%r11 ;"
-+		"adcx %%r11, %%rbx ;"
-+		"mulx 56(%2), %%r10, %%r15; " /* C[1]*D[3] */
-+		"adox %%r10, %%r13 ;"
-+		"adcx %%r13, %%rcx ;"
-+		/******************************************/
-+		"adox %%r14, %%r15 ;"
-+		"adcx %%r14, %%r15 ;"
-+
-+		"movq 48(%1), %%rdx; " /* C[2] */
-+		"xorl %%r10d, %%r10d ;"
-+		"mulx 32(%2),  %%r8,  %%r9; " /* C[2]*D[0] */
-+		"adox %%rax,  %%r8 ;"
-+		"movq  %%r8, 80(%0);"
-+		"mulx 40(%2), %%r10, %%r11; " /* C[2]*D[1] */
-+		"adox %%r10,  %%r9 ;"
-+		"adcx  %%r9, %%rbx ;"
-+		"mulx 48(%2),  %%r8, %%r13; " /* C[2]*D[2] */
-+		"adox  %%r8, %%r11 ;"
-+		"adcx %%r11, %%rcx ;"
-+		"mulx 56(%2), %%r10, %%rax; " /* C[2]*D[3] */
-+		"adox %%r10, %%r13 ;"
-+		"adcx %%r13, %%r15 ;"
-+		/******************************************/
-+		"adox %%r14, %%rax ;"
-+		"adcx %%r14, %%rax ;"
-+
-+		"movq 56(%1), %%rdx; " /* C[3] */
-+		"xorl %%r10d, %%r10d ;"
-+		"mulx 32(%2),  %%r8,  %%r9; " /* C[3]*D[0] */
-+		"adox %%rbx,  %%r8 ;"
-+		"movq  %%r8, 88(%0);"
-+		"mulx 40(%2), %%r10, %%r11; " /* C[3]*D[1] */
-+		"adox %%r10,  %%r9 ;"
-+		"adcx  %%r9, %%rcx ;"
-+		"movq %%rcx,  96(%0) ;"
-+		"mulx 48(%2),  %%r8, %%r13; " /* C[3]*D[2] */
-+		"adox  %%r8, %%r11 ;"
-+		"adcx %%r11, %%r15 ;"
-+		"movq %%r15, 104(%0) ;"
-+		"mulx 56(%2), %%r10, %%rbx; " /* C[3]*D[3] */
-+		"adox %%r10, %%r13 ;"
-+		"adcx %%r13, %%rax ;"
-+		"movq %%rax, 112(%0) ;"
-+		/******************************************/
-+		"adox %%r14, %%rbx ;"
-+		"adcx %%r14, %%rbx ;"
-+		"movq %%rbx, 120(%0) ;"
-+		:
-+		: "r"(c), "r"(a), "r"(b)
-+		: "memory", "cc", "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9",
-+		  "%r10", "%r11", "%r13", "%r14", "%r15");
-+}
-+
-+static void mul2_256x256_integer_bmi2(u64 *const c, const u64 *const a,
-+				      const u64 *const b)
-+{
-+	asm volatile(
-+		"movq   (%1), %%rdx; "	/* A[0] */
-+		"mulx   (%2),  %%r8, %%r15; " /* A[0]*B[0] */
-+		"movq %%r8,  (%0) ;"
-+		"mulx  8(%2), %%r10, %%rax; " /* A[0]*B[1] */
-+		"addq %%r10, %%r15 ;"
-+		"mulx 16(%2),  %%r8, %%rbx; " /* A[0]*B[2] */
-+		"adcq  %%r8, %%rax ;"
-+		"mulx 24(%2), %%r10, %%rcx; " /* A[0]*B[3] */
-+		"adcq %%r10, %%rbx ;"
-+		/******************************************/
-+		"adcq    $0, %%rcx ;"
-+
-+		"movq  8(%1), %%rdx; "	/* A[1] */
-+		"mulx   (%2),  %%r8,  %%r9; " /* A[1]*B[0] */
-+		"addq %%r15,  %%r8 ;"
-+		"movq %%r8, 8(%0) ;"
-+		"mulx  8(%2), %%r10, %%r11; " /* A[1]*B[1] */
-+		"adcq %%r10,  %%r9 ;"
-+		"mulx 16(%2),  %%r8, %%r13; " /* A[1]*B[2] */
-+		"adcq  %%r8, %%r11 ;"
-+		"mulx 24(%2), %%r10, %%r15; " /* A[1]*B[3] */
-+		"adcq %%r10, %%r13 ;"
-+		/******************************************/
-+		"adcq    $0, %%r15 ;"
-+
-+		"addq  %%r9, %%rax ;"
-+		"adcq %%r11, %%rbx ;"
-+		"adcq %%r13, %%rcx ;"
-+		"adcq    $0, %%r15 ;"
-+
-+		"movq 16(%1), %%rdx; "	/* A[2] */
-+		"mulx   (%2),  %%r8,  %%r9; " /* A[2]*B[0] */
-+		"addq %%rax,  %%r8 ;"
-+		"movq %%r8, 16(%0) ;"
-+		"mulx  8(%2), %%r10, %%r11; " /* A[2]*B[1] */
-+		"adcq %%r10,  %%r9 ;"
-+		"mulx 16(%2),  %%r8, %%r13; " /* A[2]*B[2] */
-+		"adcq  %%r8, %%r11 ;"
-+		"mulx 24(%2), %%r10, %%rax; " /* A[2]*B[3] */
-+		"adcq %%r10, %%r13 ;"
-+		/******************************************/
-+		"adcq    $0, %%rax ;"
-+
-+		"addq  %%r9, %%rbx ;"
-+		"adcq %%r11, %%rcx ;"
-+		"adcq %%r13, %%r15 ;"
-+		"adcq    $0, %%rax ;"
-+
-+		"movq 24(%1), %%rdx; "	/* A[3] */
-+		"mulx   (%2),  %%r8,  %%r9; " /* A[3]*B[0] */
-+		"addq %%rbx,  %%r8 ;"
-+		"movq %%r8, 24(%0) ;"
-+		"mulx  8(%2), %%r10, %%r11; " /* A[3]*B[1] */
-+		"adcq %%r10,  %%r9 ;"
-+		"mulx 16(%2),  %%r8, %%r13; " /* A[3]*B[2] */
-+		"adcq  %%r8, %%r11 ;"
-+		"mulx 24(%2), %%r10, %%rbx; " /* A[3]*B[3] */
-+		"adcq %%r10, %%r13 ;"
-+		/******************************************/
-+		"adcq    $0, %%rbx ;"
-+
-+		"addq  %%r9, %%rcx ;"
-+		"movq %%rcx, 32(%0) ;"
-+		"adcq %%r11, %%r15 ;"
-+		"movq %%r15, 40(%0) ;"
-+		"adcq %%r13, %%rax ;"
-+		"movq %%rax, 48(%0) ;"
-+		"adcq    $0, %%rbx ;"
-+		"movq %%rbx, 56(%0) ;"
-+
-+		"movq 32(%1), %%rdx; "	/* C[0] */
-+		"mulx 32(%2),  %%r8, %%r15; " /* C[0]*D[0] */
-+		"movq %%r8, 64(%0) ;"
-+		"mulx 40(%2), %%r10, %%rax; " /* C[0]*D[1] */
-+		"addq %%r10, %%r15 ;"
-+		"mulx 48(%2),  %%r8, %%rbx; " /* C[0]*D[2] */
-+		"adcq  %%r8, %%rax ;"
-+		"mulx 56(%2), %%r10, %%rcx; " /* C[0]*D[3] */
-+		"adcq %%r10, %%rbx ;"
-+		/******************************************/
-+		"adcq    $0, %%rcx ;"
-+
-+		"movq 40(%1), %%rdx; "	/* C[1] */
-+		"mulx 32(%2),  %%r8,  %%r9; " /* C[1]*D[0] */
-+		"addq %%r15,  %%r8 ;"
-+		"movq %%r8, 72(%0) ;"
-+		"mulx 40(%2), %%r10, %%r11; " /* C[1]*D[1] */
-+		"adcq %%r10,  %%r9 ;"
-+		"mulx 48(%2),  %%r8, %%r13; " /* C[1]*D[2] */
-+		"adcq  %%r8, %%r11 ;"
-+		"mulx 56(%2), %%r10, %%r15; " /* C[1]*D[3] */
-+		"adcq %%r10, %%r13 ;"
-+		/******************************************/
-+		"adcq    $0, %%r15 ;"
-+
-+		"addq  %%r9, %%rax ;"
-+		"adcq %%r11, %%rbx ;"
-+		"adcq %%r13, %%rcx ;"
-+		"adcq    $0, %%r15 ;"
-+
-+		"movq 48(%1), %%rdx; "	/* C[2] */
-+		"mulx 32(%2),  %%r8,  %%r9; " /* C[2]*D[0] */
-+		"addq %%rax,  %%r8 ;"
-+		"movq %%r8, 80(%0) ;"
-+		"mulx 40(%2), %%r10, %%r11; " /* C[2]*D[1] */
-+		"adcq %%r10,  %%r9 ;"
-+		"mulx 48(%2),  %%r8, %%r13; " /* C[2]*D[2] */
-+		"adcq  %%r8, %%r11 ;"
-+		"mulx 56(%2), %%r10, %%rax; " /* C[2]*D[3] */
-+		"adcq %%r10, %%r13 ;"
-+		/******************************************/
-+		"adcq    $0, %%rax ;"
-+
-+		"addq  %%r9, %%rbx ;"
-+		"adcq %%r11, %%rcx ;"
-+		"adcq %%r13, %%r15 ;"
-+		"adcq    $0, %%rax ;"
-+
-+		"movq 56(%1), %%rdx; "	/* C[3] */
-+		"mulx 32(%2),  %%r8,  %%r9; " /* C[3]*D[0] */
-+		"addq %%rbx,  %%r8 ;"
-+		"movq %%r8, 88(%0) ;"
-+		"mulx 40(%2), %%r10, %%r11; " /* C[3]*D[1] */
-+		"adcq %%r10,  %%r9 ;"
-+		"mulx 48(%2),  %%r8, %%r13; " /* C[3]*D[2] */
-+		"adcq  %%r8, %%r11 ;"
-+		"mulx 56(%2), %%r10, %%rbx; " /* C[3]*D[3] */
-+		"adcq %%r10, %%r13 ;"
-+		/******************************************/
-+		"adcq    $0, %%rbx ;"
-+
-+		"addq  %%r9, %%rcx ;"
-+		"movq %%rcx,  96(%0) ;"
-+		"adcq %%r11, %%r15 ;"
-+		"movq %%r15, 104(%0) ;"
-+		"adcq %%r13, %%rax ;"
-+		"movq %%rax, 112(%0) ;"
-+		"adcq    $0, %%rbx ;"
-+		"movq %%rbx, 120(%0) ;"
-+		:
-+		: "r"(c), "r"(a), "r"(b)
-+		: "memory", "cc", "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9",
-+		  "%r10", "%r11", "%r13", "%r15");
-+}
-+
-+static void sqr2_256x256_integer_adx(u64 *const c, const u64 *const a)
-+{
-+	asm volatile(
-+		"movq   (%1), %%rdx        ;" /* A[0]      */
-+		"mulx  8(%1),  %%r8, %%r14 ;" /* A[1]*A[0] */
-+		"xorl %%r15d, %%r15d;"
-+		"mulx 16(%1),  %%r9, %%r10 ;" /* A[2]*A[0] */
-+		"adcx %%r14,  %%r9 ;"
-+		"mulx 24(%1), %%rax, %%rcx ;" /* A[3]*A[0] */
-+		"adcx %%rax, %%r10 ;"
-+		"movq 24(%1), %%rdx        ;" /* A[3]      */
-+		"mulx  8(%1), %%r11, %%rbx ;" /* A[1]*A[3] */
-+		"adcx %%rcx, %%r11 ;"
-+		"mulx 16(%1), %%rax, %%r13 ;" /* A[2]*A[3] */
-+		"adcx %%rax, %%rbx ;"
-+		"movq  8(%1), %%rdx        ;" /* A[1]      */
-+		"adcx %%r15, %%r13 ;"
-+		"mulx 16(%1), %%rax, %%rcx ;" /* A[2]*A[1] */
-+		"movq    $0, %%r14 ;"
-+		/******************************************/
-+		"adcx %%r15, %%r14 ;"
-+
-+		"xorl %%r15d, %%r15d;"
-+		"adox %%rax, %%r10 ;"
-+		"adcx  %%r8,  %%r8 ;"
-+		"adox %%rcx, %%r11 ;"
-+		"adcx  %%r9,  %%r9 ;"
-+		"adox %%r15, %%rbx ;"
-+		"adcx %%r10, %%r10 ;"
-+		"adox %%r15, %%r13 ;"
-+		"adcx %%r11, %%r11 ;"
-+		"adox %%r15, %%r14 ;"
-+		"adcx %%rbx, %%rbx ;"
-+		"adcx %%r13, %%r13 ;"
-+		"adcx %%r14, %%r14 ;"
-+
-+		"movq   (%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ;" /* A[0]^2 */
-+		/*******************/
-+		"movq %%rax,  0(%0) ;"
-+		"addq %%rcx,  %%r8 ;"
-+		"movq  %%r8,  8(%0) ;"
-+		"movq  8(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ;" /* A[1]^2 */
-+		"adcq %%rax,  %%r9 ;"
-+		"movq  %%r9, 16(%0) ;"
-+		"adcq %%rcx, %%r10 ;"
-+		"movq %%r10, 24(%0) ;"
-+		"movq 16(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ;" /* A[2]^2 */
-+		"adcq %%rax, %%r11 ;"
-+		"movq %%r11, 32(%0) ;"
-+		"adcq %%rcx, %%rbx ;"
-+		"movq %%rbx, 40(%0) ;"
-+		"movq 24(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ;" /* A[3]^2 */
-+		"adcq %%rax, %%r13 ;"
-+		"movq %%r13, 48(%0) ;"
-+		"adcq %%rcx, %%r14 ;"
-+		"movq %%r14, 56(%0) ;"
-+
-+
-+		"movq 32(%1), %%rdx        ;" /* B[0]      */
-+		"mulx 40(%1),  %%r8, %%r14 ;" /* B[1]*B[0] */
-+		"xorl %%r15d, %%r15d;"
-+		"mulx 48(%1),  %%r9, %%r10 ;" /* B[2]*B[0] */
-+		"adcx %%r14,  %%r9 ;"
-+		"mulx 56(%1), %%rax, %%rcx ;" /* B[3]*B[0] */
-+		"adcx %%rax, %%r10 ;"
-+		"movq 56(%1), %%rdx        ;" /* B[3]      */
-+		"mulx 40(%1), %%r11, %%rbx ;" /* B[1]*B[3] */
-+		"adcx %%rcx, %%r11 ;"
-+		"mulx 48(%1), %%rax, %%r13 ;" /* B[2]*B[3] */
-+		"adcx %%rax, %%rbx ;"
-+		"movq 40(%1), %%rdx        ;" /* B[1]      */
-+		"adcx %%r15, %%r13 ;"
-+		"mulx 48(%1), %%rax, %%rcx ;" /* B[2]*B[1] */
-+		"movq    $0, %%r14 ;"
-+		/******************************************/
-+		"adcx %%r15, %%r14 ;"
-+
-+		"xorl %%r15d, %%r15d;"
-+		"adox %%rax, %%r10 ;"
-+		"adcx  %%r8,  %%r8 ;"
-+		"adox %%rcx, %%r11 ;"
-+		"adcx  %%r9,  %%r9 ;"
-+		"adox %%r15, %%rbx ;"
-+		"adcx %%r10, %%r10 ;"
-+		"adox %%r15, %%r13 ;"
-+		"adcx %%r11, %%r11 ;"
-+		"adox %%r15, %%r14 ;"
-+		"adcx %%rbx, %%rbx ;"
-+		"adcx %%r13, %%r13 ;"
-+		"adcx %%r14, %%r14 ;"
-+
-+		"movq 32(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ;" /* B[0]^2 */
-+		/*******************/
-+		"movq %%rax,  64(%0) ;"
-+		"addq %%rcx,  %%r8 ;"
-+		"movq  %%r8,  72(%0) ;"
-+		"movq 40(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ;" /* B[1]^2 */
-+		"adcq %%rax,  %%r9 ;"
-+		"movq  %%r9,  80(%0) ;"
-+		"adcq %%rcx, %%r10 ;"
-+		"movq %%r10,  88(%0) ;"
-+		"movq 48(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ;" /* B[2]^2 */
-+		"adcq %%rax, %%r11 ;"
-+		"movq %%r11,  96(%0) ;"
-+		"adcq %%rcx, %%rbx ;"
-+		"movq %%rbx, 104(%0) ;"
-+		"movq 56(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ;" /* B[3]^2 */
-+		"adcq %%rax, %%r13 ;"
-+		"movq %%r13, 112(%0) ;"
-+		"adcq %%rcx, %%r14 ;"
-+		"movq %%r14, 120(%0) ;"
-+		:
-+		: "r"(c), "r"(a)
-+		: "memory", "cc", "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9",
-+		  "%r10", "%r11", "%r13", "%r14", "%r15");
-+}
-+
-+static void sqr2_256x256_integer_bmi2(u64 *const c, const u64 *const a)
-+{
-+	asm volatile(
-+		"movq  8(%1), %%rdx        ;" /* A[1]      */
-+		"mulx   (%1),  %%r8,  %%r9 ;" /* A[0]*A[1] */
-+		"mulx 16(%1), %%r10, %%r11 ;" /* A[2]*A[1] */
-+		"mulx 24(%1), %%rcx, %%r14 ;" /* A[3]*A[1] */
-+
-+		"movq 16(%1), %%rdx        ;" /* A[2]      */
-+		"mulx 24(%1), %%r15, %%r13 ;" /* A[3]*A[2] */
-+		"mulx   (%1), %%rax, %%rdx ;" /* A[0]*A[2] */
-+
-+		"addq %%rax,  %%r9 ;"
-+		"adcq %%rdx, %%r10 ;"
-+		"adcq %%rcx, %%r11 ;"
-+		"adcq %%r14, %%r15 ;"
-+		"adcq    $0, %%r13 ;"
-+		"movq    $0, %%r14 ;"
-+		"adcq    $0, %%r14 ;"
-+
-+		"movq   (%1), %%rdx        ;" /* A[0]      */
-+		"mulx 24(%1), %%rax, %%rcx ;" /* A[0]*A[3] */
-+
-+		"addq %%rax, %%r10 ;"
-+		"adcq %%rcx, %%r11 ;"
-+		"adcq    $0, %%r15 ;"
-+		"adcq    $0, %%r13 ;"
-+		"adcq    $0, %%r14 ;"
-+
-+		"shldq $1, %%r13, %%r14 ;"
-+		"shldq $1, %%r15, %%r13 ;"
-+		"shldq $1, %%r11, %%r15 ;"
-+		"shldq $1, %%r10, %%r11 ;"
-+		"shldq $1,  %%r9, %%r10 ;"
-+		"shldq $1,  %%r8,  %%r9 ;"
-+		"shlq  $1,  %%r8        ;"
-+
-+		/*******************/
-+		"mulx %%rdx, %%rax, %%rcx ; " /* A[0]^2 */
-+		/*******************/
-+		"movq %%rax,  0(%0) ;"
-+		"addq %%rcx,  %%r8 ;"
-+		"movq  %%r8,  8(%0) ;"
-+		"movq  8(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ; " /* A[1]^2 */
-+		"adcq %%rax,  %%r9 ;"
-+		"movq  %%r9, 16(%0) ;"
-+		"adcq %%rcx, %%r10 ;"
-+		"movq %%r10, 24(%0) ;"
-+		"movq 16(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ; " /* A[2]^2 */
-+		"adcq %%rax, %%r11 ;"
-+		"movq %%r11, 32(%0) ;"
-+		"adcq %%rcx, %%r15 ;"
-+		"movq %%r15, 40(%0) ;"
-+		"movq 24(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ; " /* A[3]^2 */
-+		"adcq %%rax, %%r13 ;"
-+		"movq %%r13, 48(%0) ;"
-+		"adcq %%rcx, %%r14 ;"
-+		"movq %%r14, 56(%0) ;"
-+
-+		"movq 40(%1), %%rdx        ;" /* B[1]      */
-+		"mulx 32(%1),  %%r8,  %%r9 ;" /* B[0]*B[1] */
-+		"mulx 48(%1), %%r10, %%r11 ;" /* B[2]*B[1] */
-+		"mulx 56(%1), %%rcx, %%r14 ;" /* B[3]*B[1] */
-+
-+		"movq 48(%1), %%rdx        ;" /* B[2]      */
-+		"mulx 56(%1), %%r15, %%r13 ;" /* B[3]*B[2] */
-+		"mulx 32(%1), %%rax, %%rdx ;" /* B[0]*B[2] */
-+
-+		"addq %%rax,  %%r9 ;"
-+		"adcq %%rdx, %%r10 ;"
-+		"adcq %%rcx, %%r11 ;"
-+		"adcq %%r14, %%r15 ;"
-+		"adcq    $0, %%r13 ;"
-+		"movq    $0, %%r14 ;"
-+		"adcq    $0, %%r14 ;"
-+
-+		"movq 32(%1), %%rdx        ;" /* B[0]      */
-+		"mulx 56(%1), %%rax, %%rcx ;" /* B[0]*B[3] */
-+
-+		"addq %%rax, %%r10 ;"
-+		"adcq %%rcx, %%r11 ;"
-+		"adcq    $0, %%r15 ;"
-+		"adcq    $0, %%r13 ;"
-+		"adcq    $0, %%r14 ;"
-+
-+		"shldq $1, %%r13, %%r14 ;"
-+		"shldq $1, %%r15, %%r13 ;"
-+		"shldq $1, %%r11, %%r15 ;"
-+		"shldq $1, %%r10, %%r11 ;"
-+		"shldq $1,  %%r9, %%r10 ;"
-+		"shldq $1,  %%r8,  %%r9 ;"
-+		"shlq  $1,  %%r8        ;"
-+
-+		/*******************/
-+		"mulx %%rdx, %%rax, %%rcx ; " /* B[0]^2 */
-+		/*******************/
-+		"movq %%rax,  64(%0) ;"
-+		"addq %%rcx,  %%r8 ;"
-+		"movq  %%r8,  72(%0) ;"
-+		"movq 40(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ; " /* B[1]^2 */
-+		"adcq %%rax,  %%r9 ;"
-+		"movq  %%r9,  80(%0) ;"
-+		"adcq %%rcx, %%r10 ;"
-+		"movq %%r10,  88(%0) ;"
-+		"movq 48(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ; " /* B[2]^2 */
-+		"adcq %%rax, %%r11 ;"
-+		"movq %%r11,  96(%0) ;"
-+		"adcq %%rcx, %%r15 ;"
-+		"movq %%r15, 104(%0) ;"
-+		"movq 56(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ; " /* B[3]^2 */
-+		"adcq %%rax, %%r13 ;"
-+		"movq %%r13, 112(%0) ;"
-+		"adcq %%rcx, %%r14 ;"
-+		"movq %%r14, 120(%0) ;"
-+		:
-+		: "r"(c), "r"(a)
-+		: "memory", "cc", "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10",
-+		  "%r11", "%r13", "%r14", "%r15");
-+}
-+
-+static void red_eltfp25519_2w_adx(u64 *const c, const u64 *const a)
-+{
-+	asm volatile(
-+		"movl    $38, %%edx; "	/* 2*c = 38 = 2^256 */
-+		"mulx 32(%1),  %%r8, %%r10; " /* c*C[4] */
-+		"xorl %%ebx, %%ebx ;"
-+		"adox   (%1),  %%r8 ;"
-+		"mulx 40(%1),  %%r9, %%r11; " /* c*C[5] */
-+		"adcx %%r10,  %%r9 ;"
-+		"adox  8(%1),  %%r9 ;"
-+		"mulx 48(%1), %%r10, %%rax; " /* c*C[6] */
-+		"adcx %%r11, %%r10 ;"
-+		"adox 16(%1), %%r10 ;"
-+		"mulx 56(%1), %%r11, %%rcx; " /* c*C[7] */
-+		"adcx %%rax, %%r11 ;"
-+		"adox 24(%1), %%r11 ;"
-+		/***************************************/
-+		"adcx %%rbx, %%rcx ;"
-+		"adox  %%rbx, %%rcx ;"
-+		"imul %%rdx, %%rcx ;" /* c*C[4], cf=0, of=0 */
-+		"adcx %%rcx,  %%r8 ;"
-+		"adcx %%rbx,  %%r9 ;"
-+		"movq  %%r9,  8(%0) ;"
-+		"adcx %%rbx, %%r10 ;"
-+		"movq %%r10, 16(%0) ;"
-+		"adcx %%rbx, %%r11 ;"
-+		"movq %%r11, 24(%0) ;"
-+		"mov     $0, %%ecx ;"
-+		"cmovc %%edx, %%ecx ;"
-+		"addq %%rcx,  %%r8 ;"
-+		"movq  %%r8,   (%0) ;"
-+
-+		"mulx  96(%1),  %%r8, %%r10; " /* c*C[4] */
-+		"xorl %%ebx, %%ebx ;"
-+		"adox 64(%1),  %%r8 ;"
-+		"mulx 104(%1),  %%r9, %%r11; " /* c*C[5] */
-+		"adcx %%r10,  %%r9 ;"
-+		"adox 72(%1),  %%r9 ;"
-+		"mulx 112(%1), %%r10, %%rax; " /* c*C[6] */
-+		"adcx %%r11, %%r10 ;"
-+		"adox 80(%1), %%r10 ;"
-+		"mulx 120(%1), %%r11, %%rcx; " /* c*C[7] */
-+		"adcx %%rax, %%r11 ;"
-+		"adox 88(%1), %%r11 ;"
-+		/****************************************/
-+		"adcx %%rbx, %%rcx ;"
-+		"adox  %%rbx, %%rcx ;"
-+		"imul %%rdx, %%rcx ;" /* c*C[4], cf=0, of=0 */
-+		"adcx %%rcx,  %%r8 ;"
-+		"adcx %%rbx,  %%r9 ;"
-+		"movq  %%r9, 40(%0) ;"
-+		"adcx %%rbx, %%r10 ;"
-+		"movq %%r10, 48(%0) ;"
-+		"adcx %%rbx, %%r11 ;"
-+		"movq %%r11, 56(%0) ;"
-+		"mov     $0, %%ecx ;"
-+		"cmovc %%edx, %%ecx ;"
-+		"addq %%rcx,  %%r8 ;"
-+		"movq  %%r8, 32(%0) ;"
-+		:
-+		: "r"(c), "r"(a)
-+		: "memory", "cc", "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9",
-+		  "%r10", "%r11");
-+}
-+
-+static void red_eltfp25519_2w_bmi2(u64 *const c, const u64 *const a)
-+{
-+	asm volatile(
-+		"movl    $38, %%edx ; "       /* 2*c = 38 = 2^256 */
-+		"mulx 32(%1),  %%r8, %%r10 ;" /* c*C[4] */
-+		"mulx 40(%1),  %%r9, %%r11 ;" /* c*C[5] */
-+		"addq %%r10,  %%r9 ;"
-+		"mulx 48(%1), %%r10, %%rax ;" /* c*C[6] */
-+		"adcq %%r11, %%r10 ;"
-+		"mulx 56(%1), %%r11, %%rcx ;" /* c*C[7] */
-+		"adcq %%rax, %%r11 ;"
-+		/***************************************/
-+		"adcq    $0, %%rcx ;"
-+		"addq   (%1),  %%r8 ;"
-+		"adcq  8(%1),  %%r9 ;"
-+		"adcq 16(%1), %%r10 ;"
-+		"adcq 24(%1), %%r11 ;"
-+		"adcq     $0, %%rcx ;"
-+		"imul %%rdx, %%rcx ;" /* c*C[4], cf=0 */
-+		"addq %%rcx,  %%r8 ;"
-+		"adcq    $0,  %%r9 ;"
-+		"movq  %%r9,  8(%0) ;"
-+		"adcq    $0, %%r10 ;"
-+		"movq %%r10, 16(%0) ;"
-+		"adcq    $0, %%r11 ;"
-+		"movq %%r11, 24(%0) ;"
-+		"mov     $0, %%ecx ;"
-+		"cmovc %%edx, %%ecx ;"
-+		"addq %%rcx,  %%r8 ;"
-+		"movq  %%r8,   (%0) ;"
-+
-+		"mulx  96(%1),  %%r8, %%r10 ;" /* c*C[4] */
-+		"mulx 104(%1),  %%r9, %%r11 ;" /* c*C[5] */
-+		"addq %%r10,  %%r9 ;"
-+		"mulx 112(%1), %%r10, %%rax ;" /* c*C[6] */
-+		"adcq %%r11, %%r10 ;"
-+		"mulx 120(%1), %%r11, %%rcx ;" /* c*C[7] */
-+		"adcq %%rax, %%r11 ;"
-+		/****************************************/
-+		"adcq    $0, %%rcx ;"
-+		"addq 64(%1),  %%r8 ;"
-+		"adcq 72(%1),  %%r9 ;"
-+		"adcq 80(%1), %%r10 ;"
-+		"adcq 88(%1), %%r11 ;"
-+		"adcq     $0, %%rcx ;"
-+		"imul %%rdx, %%rcx ;" /* c*C[4], cf=0 */
-+		"addq %%rcx,  %%r8 ;"
-+		"adcq    $0,  %%r9 ;"
-+		"movq  %%r9, 40(%0) ;"
-+		"adcq    $0, %%r10 ;"
-+		"movq %%r10, 48(%0) ;"
-+		"adcq    $0, %%r11 ;"
-+		"movq %%r11, 56(%0) ;"
-+		"mov     $0, %%ecx ;"
-+		"cmovc %%edx, %%ecx ;"
-+		"addq %%rcx,  %%r8 ;"
-+		"movq  %%r8, 32(%0) ;"
-+		:
-+		: "r"(c), "r"(a)
-+		: "memory", "cc", "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10",
-+		  "%r11");
-+}
-+
-+static void mul_256x256_integer_adx(u64 *const c, const u64 *const a,
-+				    const u64 *const b)
-+{
-+	asm volatile(
-+		"movq   (%1), %%rdx; "	/* A[0] */
-+		"mulx   (%2),  %%r8,  %%r9; " /* A[0]*B[0] */
-+		"xorl %%r10d, %%r10d ;"
-+		"movq  %%r8,  (%0) ;"
-+		"mulx  8(%2), %%r10, %%r11; " /* A[0]*B[1] */
-+		"adox  %%r9, %%r10 ;"
-+		"movq %%r10, 8(%0) ;"
-+		"mulx 16(%2), %%r15, %%r13; " /* A[0]*B[2] */
-+		"adox %%r11, %%r15 ;"
-+		"mulx 24(%2), %%r14, %%rdx; " /* A[0]*B[3] */
-+		"adox %%r13, %%r14 ;"
-+		"movq $0, %%rax ;"
-+		/******************************************/
-+		"adox %%rdx, %%rax ;"
-+
-+		"movq  8(%1), %%rdx; "	/* A[1] */
-+		"mulx   (%2),  %%r8,  %%r9; " /* A[1]*B[0] */
-+		"xorl %%r10d, %%r10d ;"
-+		"adcx 8(%0),  %%r8 ;"
-+		"movq  %%r8,  8(%0) ;"
-+		"mulx  8(%2), %%r10, %%r11; " /* A[1]*B[1] */
-+		"adox  %%r9, %%r10 ;"
-+		"adcx %%r15, %%r10 ;"
-+		"movq %%r10, 16(%0) ;"
-+		"mulx 16(%2), %%r15, %%r13; " /* A[1]*B[2] */
-+		"adox %%r11, %%r15 ;"
-+		"adcx %%r14, %%r15 ;"
-+		"movq $0, %%r8  ;"
-+		"mulx 24(%2), %%r14, %%rdx; " /* A[1]*B[3] */
-+		"adox %%r13, %%r14 ;"
-+		"adcx %%rax, %%r14 ;"
-+		"movq $0, %%rax ;"
-+		/******************************************/
-+		"adox %%rdx, %%rax ;"
-+		"adcx  %%r8, %%rax ;"
-+
-+		"movq 16(%1), %%rdx; "	/* A[2] */
-+		"mulx   (%2),  %%r8,  %%r9; " /* A[2]*B[0] */
-+		"xorl %%r10d, %%r10d ;"
-+		"adcx 16(%0), %%r8 ;"
-+		"movq  %%r8, 16(%0) ;"
-+		"mulx  8(%2), %%r10, %%r11; " /* A[2]*B[1] */
-+		"adox  %%r9, %%r10 ;"
-+		"adcx %%r15, %%r10 ;"
-+		"movq %%r10, 24(%0) ;"
-+		"mulx 16(%2), %%r15, %%r13; " /* A[2]*B[2] */
-+		"adox %%r11, %%r15 ;"
-+		"adcx %%r14, %%r15 ;"
-+		"movq $0, %%r8  ;"
-+		"mulx 24(%2), %%r14, %%rdx; " /* A[2]*B[3] */
-+		"adox %%r13, %%r14 ;"
-+		"adcx %%rax, %%r14 ;"
-+		"movq $0, %%rax ;"
-+		/******************************************/
-+		"adox %%rdx, %%rax ;"
-+		"adcx  %%r8, %%rax ;"
-+
-+		"movq 24(%1), %%rdx; "	/* A[3] */
-+		"mulx   (%2),  %%r8,  %%r9; " /* A[3]*B[0] */
-+		"xorl %%r10d, %%r10d ;"
-+		"adcx 24(%0), %%r8 ;"
-+		"movq  %%r8, 24(%0) ;"
-+		"mulx  8(%2), %%r10, %%r11; " /* A[3]*B[1] */
-+		"adox  %%r9, %%r10 ;"
-+		"adcx %%r15, %%r10 ;"
-+		"movq %%r10, 32(%0) ;"
-+		"mulx 16(%2), %%r15, %%r13; " /* A[3]*B[2] */
-+		"adox %%r11, %%r15 ;"
-+		"adcx %%r14, %%r15 ;"
-+		"movq %%r15, 40(%0) ;"
-+		"movq $0, %%r8  ;"
-+		"mulx 24(%2), %%r14, %%rdx; " /* A[3]*B[3] */
-+		"adox %%r13, %%r14 ;"
-+		"adcx %%rax, %%r14 ;"
-+		"movq %%r14, 48(%0) ;"
-+		"movq $0, %%rax ;"
-+		/******************************************/
-+		"adox %%rdx, %%rax ;"
-+		"adcx  %%r8, %%rax ;"
-+		"movq %%rax, 56(%0) ;"
-+		:
-+		: "r"(c), "r"(a), "r"(b)
-+		: "memory", "cc", "%rax", "%rdx", "%r8", "%r9", "%r10", "%r11",
-+		  "%r13", "%r14", "%r15");
-+}
-+
-+static void mul_256x256_integer_bmi2(u64 *const c, const u64 *const a,
-+				     const u64 *const b)
-+{
-+	asm volatile(
-+		"movq   (%1), %%rdx; "	/* A[0] */
-+		"mulx   (%2),  %%r8, %%r15; " /* A[0]*B[0] */
-+		"movq %%r8,  (%0) ;"
-+		"mulx  8(%2), %%r10, %%rax; " /* A[0]*B[1] */
-+		"addq %%r10, %%r15 ;"
-+		"mulx 16(%2),  %%r8, %%rbx; " /* A[0]*B[2] */
-+		"adcq  %%r8, %%rax ;"
-+		"mulx 24(%2), %%r10, %%rcx; " /* A[0]*B[3] */
-+		"adcq %%r10, %%rbx ;"
-+		/******************************************/
-+		"adcq    $0, %%rcx ;"
-+
-+		"movq  8(%1), %%rdx; "	/* A[1] */
-+		"mulx   (%2),  %%r8,  %%r9; " /* A[1]*B[0] */
-+		"addq %%r15,  %%r8 ;"
-+		"movq %%r8, 8(%0) ;"
-+		"mulx  8(%2), %%r10, %%r11; " /* A[1]*B[1] */
-+		"adcq %%r10,  %%r9 ;"
-+		"mulx 16(%2),  %%r8, %%r13; " /* A[1]*B[2] */
-+		"adcq  %%r8, %%r11 ;"
-+		"mulx 24(%2), %%r10, %%r15; " /* A[1]*B[3] */
-+		"adcq %%r10, %%r13 ;"
-+		/******************************************/
-+		"adcq    $0, %%r15 ;"
-+
-+		"addq  %%r9, %%rax ;"
-+		"adcq %%r11, %%rbx ;"
-+		"adcq %%r13, %%rcx ;"
-+		"adcq    $0, %%r15 ;"
-+
-+		"movq 16(%1), %%rdx; "	/* A[2] */
-+		"mulx   (%2),  %%r8,  %%r9; " /* A[2]*B[0] */
-+		"addq %%rax,  %%r8 ;"
-+		"movq %%r8, 16(%0) ;"
-+		"mulx  8(%2), %%r10, %%r11; " /* A[2]*B[1] */
-+		"adcq %%r10,  %%r9 ;"
-+		"mulx 16(%2),  %%r8, %%r13; " /* A[2]*B[2] */
-+		"adcq  %%r8, %%r11 ;"
-+		"mulx 24(%2), %%r10, %%rax; " /* A[2]*B[3] */
-+		"adcq %%r10, %%r13 ;"
-+		/******************************************/
-+		"adcq    $0, %%rax ;"
-+
-+		"addq  %%r9, %%rbx ;"
-+		"adcq %%r11, %%rcx ;"
-+		"adcq %%r13, %%r15 ;"
-+		"adcq    $0, %%rax ;"
-+
-+		"movq 24(%1), %%rdx; "	/* A[3] */
-+		"mulx   (%2),  %%r8,  %%r9; " /* A[3]*B[0] */
-+		"addq %%rbx,  %%r8 ;"
-+		"movq %%r8, 24(%0) ;"
-+		"mulx  8(%2), %%r10, %%r11; " /* A[3]*B[1] */
-+		"adcq %%r10,  %%r9 ;"
-+		"mulx 16(%2),  %%r8, %%r13; " /* A[3]*B[2] */
-+		"adcq  %%r8, %%r11 ;"
-+		"mulx 24(%2), %%r10, %%rbx; " /* A[3]*B[3] */
-+		"adcq %%r10, %%r13 ;"
-+		/******************************************/
-+		"adcq    $0, %%rbx ;"
-+
-+		"addq  %%r9, %%rcx ;"
-+		"movq %%rcx, 32(%0) ;"
-+		"adcq %%r11, %%r15 ;"
-+		"movq %%r15, 40(%0) ;"
-+		"adcq %%r13, %%rax ;"
-+		"movq %%rax, 48(%0) ;"
-+		"adcq    $0, %%rbx ;"
-+		"movq %%rbx, 56(%0) ;"
-+		:
-+		: "r"(c), "r"(a), "r"(b)
-+		: "memory", "cc", "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9",
-+		  "%r10", "%r11", "%r13", "%r15");
-+}
-+
-+static void sqr_256x256_integer_adx(u64 *const c, const u64 *const a)
-+{
-+	asm volatile(
-+		"movq   (%1), %%rdx        ;" /* A[0]      */
-+		"mulx  8(%1),  %%r8, %%r14 ;" /* A[1]*A[0] */
-+		"xorl %%r15d, %%r15d;"
-+		"mulx 16(%1),  %%r9, %%r10 ;" /* A[2]*A[0] */
-+		"adcx %%r14,  %%r9 ;"
-+		"mulx 24(%1), %%rax, %%rcx ;" /* A[3]*A[0] */
-+		"adcx %%rax, %%r10 ;"
-+		"movq 24(%1), %%rdx        ;" /* A[3]      */
-+		"mulx  8(%1), %%r11, %%rbx ;" /* A[1]*A[3] */
-+		"adcx %%rcx, %%r11 ;"
-+		"mulx 16(%1), %%rax, %%r13 ;" /* A[2]*A[3] */
-+		"adcx %%rax, %%rbx ;"
-+		"movq  8(%1), %%rdx        ;" /* A[1]      */
-+		"adcx %%r15, %%r13 ;"
-+		"mulx 16(%1), %%rax, %%rcx ;" /* A[2]*A[1] */
-+		"movq    $0, %%r14 ;"
-+		/******************************************/
-+		"adcx %%r15, %%r14 ;"
-+
-+		"xorl %%r15d, %%r15d;"
-+		"adox %%rax, %%r10 ;"
-+		"adcx  %%r8,  %%r8 ;"
-+		"adox %%rcx, %%r11 ;"
-+		"adcx  %%r9,  %%r9 ;"
-+		"adox %%r15, %%rbx ;"
-+		"adcx %%r10, %%r10 ;"
-+		"adox %%r15, %%r13 ;"
-+		"adcx %%r11, %%r11 ;"
-+		"adox %%r15, %%r14 ;"
-+		"adcx %%rbx, %%rbx ;"
-+		"adcx %%r13, %%r13 ;"
-+		"adcx %%r14, %%r14 ;"
-+
-+		"movq   (%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ;" /* A[0]^2 */
-+		/*******************/
-+		"movq %%rax,  0(%0) ;"
-+		"addq %%rcx,  %%r8 ;"
-+		"movq  %%r8,  8(%0) ;"
-+		"movq  8(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ;" /* A[1]^2 */
-+		"adcq %%rax,  %%r9 ;"
-+		"movq  %%r9, 16(%0) ;"
-+		"adcq %%rcx, %%r10 ;"
-+		"movq %%r10, 24(%0) ;"
-+		"movq 16(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ;" /* A[2]^2 */
-+		"adcq %%rax, %%r11 ;"
-+		"movq %%r11, 32(%0) ;"
-+		"adcq %%rcx, %%rbx ;"
-+		"movq %%rbx, 40(%0) ;"
-+		"movq 24(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ;" /* A[3]^2 */
-+		"adcq %%rax, %%r13 ;"
-+		"movq %%r13, 48(%0) ;"
-+		"adcq %%rcx, %%r14 ;"
-+		"movq %%r14, 56(%0) ;"
-+		:
-+		: "r"(c), "r"(a)
-+		: "memory", "cc", "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9",
-+		  "%r10", "%r11", "%r13", "%r14", "%r15");
-+}
-+
-+static void sqr_256x256_integer_bmi2(u64 *const c, const u64 *const a)
-+{
-+	asm volatile(
-+		"movq  8(%1), %%rdx        ;" /* A[1]      */
-+		"mulx   (%1),  %%r8,  %%r9 ;" /* A[0]*A[1] */
-+		"mulx 16(%1), %%r10, %%r11 ;" /* A[2]*A[1] */
-+		"mulx 24(%1), %%rcx, %%r14 ;" /* A[3]*A[1] */
-+
-+		"movq 16(%1), %%rdx        ;" /* A[2]      */
-+		"mulx 24(%1), %%r15, %%r13 ;" /* A[3]*A[2] */
-+		"mulx   (%1), %%rax, %%rdx ;" /* A[0]*A[2] */
-+
-+		"addq %%rax,  %%r9 ;"
-+		"adcq %%rdx, %%r10 ;"
-+		"adcq %%rcx, %%r11 ;"
-+		"adcq %%r14, %%r15 ;"
-+		"adcq    $0, %%r13 ;"
-+		"movq    $0, %%r14 ;"
-+		"adcq    $0, %%r14 ;"
-+
-+		"movq   (%1), %%rdx        ;" /* A[0]      */
-+		"mulx 24(%1), %%rax, %%rcx ;" /* A[0]*A[3] */
-+
-+		"addq %%rax, %%r10 ;"
-+		"adcq %%rcx, %%r11 ;"
-+		"adcq    $0, %%r15 ;"
-+		"adcq    $0, %%r13 ;"
-+		"adcq    $0, %%r14 ;"
-+
-+		"shldq $1, %%r13, %%r14 ;"
-+		"shldq $1, %%r15, %%r13 ;"
-+		"shldq $1, %%r11, %%r15 ;"
-+		"shldq $1, %%r10, %%r11 ;"
-+		"shldq $1,  %%r9, %%r10 ;"
-+		"shldq $1,  %%r8,  %%r9 ;"
-+		"shlq  $1,  %%r8        ;"
-+
-+		/*******************/
-+		"mulx %%rdx, %%rax, %%rcx ;" /* A[0]^2 */
-+		/*******************/
-+		"movq %%rax,  0(%0) ;"
-+		"addq %%rcx,  %%r8 ;"
-+		"movq  %%r8,  8(%0) ;"
-+		"movq  8(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ;" /* A[1]^2 */
-+		"adcq %%rax,  %%r9 ;"
-+		"movq  %%r9, 16(%0) ;"
-+		"adcq %%rcx, %%r10 ;"
-+		"movq %%r10, 24(%0) ;"
-+		"movq 16(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ;" /* A[2]^2 */
-+		"adcq %%rax, %%r11 ;"
-+		"movq %%r11, 32(%0) ;"
-+		"adcq %%rcx, %%r15 ;"
-+		"movq %%r15, 40(%0) ;"
-+		"movq 24(%1), %%rdx ;"
-+		"mulx %%rdx, %%rax, %%rcx ;" /* A[3]^2 */
-+		"adcq %%rax, %%r13 ;"
-+		"movq %%r13, 48(%0) ;"
-+		"adcq %%rcx, %%r14 ;"
-+		"movq %%r14, 56(%0) ;"
-+		:
-+		: "r"(c), "r"(a)
-+		: "memory", "cc", "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10",
-+		  "%r11", "%r13", "%r14", "%r15");
-+}
-+
-+static void red_eltfp25519_1w_adx(u64 *const c, const u64 *const a)
-+{
-+	asm volatile(
-+		"movl    $38, %%edx ;"	/* 2*c = 38 = 2^256 */
-+		"mulx 32(%1),  %%r8, %%r10 ;" /* c*C[4] */
-+		"xorl %%ebx, %%ebx ;"
-+		"adox   (%1),  %%r8 ;"
-+		"mulx 40(%1),  %%r9, %%r11 ;" /* c*C[5] */
-+		"adcx %%r10,  %%r9 ;"
-+		"adox  8(%1),  %%r9 ;"
-+		"mulx 48(%1), %%r10, %%rax ;" /* c*C[6] */
-+		"adcx %%r11, %%r10 ;"
-+		"adox 16(%1), %%r10 ;"
-+		"mulx 56(%1), %%r11, %%rcx ;" /* c*C[7] */
-+		"adcx %%rax, %%r11 ;"
-+		"adox 24(%1), %%r11 ;"
-+		/***************************************/
-+		"adcx %%rbx, %%rcx ;"
-+		"adox  %%rbx, %%rcx ;"
-+		"imul %%rdx, %%rcx ;" /* c*C[4], cf=0, of=0 */
-+		"adcx %%rcx,  %%r8 ;"
-+		"adcx %%rbx,  %%r9 ;"
-+		"movq  %%r9,  8(%0) ;"
-+		"adcx %%rbx, %%r10 ;"
-+		"movq %%r10, 16(%0) ;"
-+		"adcx %%rbx, %%r11 ;"
-+		"movq %%r11, 24(%0) ;"
-+		"mov     $0, %%ecx ;"
-+		"cmovc %%edx, %%ecx ;"
-+		"addq %%rcx,  %%r8 ;"
-+		"movq  %%r8,   (%0) ;"
-+		:
-+		: "r"(c), "r"(a)
-+		: "memory", "cc", "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9",
-+		  "%r10", "%r11");
-+}
-+
-+static void red_eltfp25519_1w_bmi2(u64 *const c, const u64 *const a)
-+{
-+	asm volatile(
-+		"movl    $38, %%edx ;"	/* 2*c = 38 = 2^256 */
-+		"mulx 32(%1),  %%r8, %%r10 ;" /* c*C[4] */
-+		"mulx 40(%1),  %%r9, %%r11 ;" /* c*C[5] */
-+		"addq %%r10,  %%r9 ;"
-+		"mulx 48(%1), %%r10, %%rax ;" /* c*C[6] */
-+		"adcq %%r11, %%r10 ;"
-+		"mulx 56(%1), %%r11, %%rcx ;" /* c*C[7] */
-+		"adcq %%rax, %%r11 ;"
-+		/***************************************/
-+		"adcq    $0, %%rcx ;"
-+		"addq   (%1),  %%r8 ;"
-+		"adcq  8(%1),  %%r9 ;"
-+		"adcq 16(%1), %%r10 ;"
-+		"adcq 24(%1), %%r11 ;"
-+		"adcq     $0, %%rcx ;"
-+		"imul %%rdx, %%rcx ;" /* c*C[4], cf=0 */
-+		"addq %%rcx,  %%r8 ;"
-+		"adcq    $0,  %%r9 ;"
-+		"movq  %%r9,  8(%0) ;"
-+		"adcq    $0, %%r10 ;"
-+		"movq %%r10, 16(%0) ;"
-+		"adcq    $0, %%r11 ;"
-+		"movq %%r11, 24(%0) ;"
-+		"mov     $0, %%ecx ;"
-+		"cmovc %%edx, %%ecx ;"
-+		"addq %%rcx,  %%r8 ;"
-+		"movq  %%r8,   (%0) ;"
-+		:
-+		: "r"(c), "r"(a)
-+		: "memory", "cc", "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10",
-+		  "%r11");
-+}
-+
-+static __always_inline void
-+add_eltfp25519_1w_adx(u64 *const c, const u64 *const a, const u64 *const b)
-+{
-+	asm volatile(
-+		"mov     $38, %%eax ;"
-+		"xorl  %%ecx, %%ecx ;"
-+		"movq   (%2),  %%r8 ;"
-+		"adcx   (%1),  %%r8 ;"
-+		"movq  8(%2),  %%r9 ;"
-+		"adcx  8(%1),  %%r9 ;"
-+		"movq 16(%2), %%r10 ;"
-+		"adcx 16(%1), %%r10 ;"
-+		"movq 24(%2), %%r11 ;"
-+		"adcx 24(%1), %%r11 ;"
-+		"cmovc %%eax, %%ecx ;"
-+		"xorl %%eax, %%eax  ;"
-+		"adcx %%rcx,  %%r8  ;"
-+		"adcx %%rax,  %%r9  ;"
-+		"movq  %%r9,  8(%0) ;"
-+		"adcx %%rax, %%r10  ;"
-+		"movq %%r10, 16(%0) ;"
-+		"adcx %%rax, %%r11  ;"
-+		"movq %%r11, 24(%0) ;"
-+		"mov     $38, %%ecx ;"
-+		"cmovc %%ecx, %%eax ;"
-+		"addq %%rax,  %%r8  ;"
-+		"movq  %%r8,   (%0) ;"
-+		:
-+		: "r"(c), "r"(a), "r"(b)
-+		: "memory", "cc", "%rax", "%rcx", "%r8", "%r9", "%r10", "%r11");
-+}
-+
-+static __always_inline void
-+add_eltfp25519_1w_bmi2(u64 *const c, const u64 *const a, const u64 *const b)
-+{
-+	asm volatile(
-+		"mov     $38, %%eax ;"
-+		"movq   (%2),  %%r8 ;"
-+		"addq   (%1),  %%r8 ;"
-+		"movq  8(%2),  %%r9 ;"
-+		"adcq  8(%1),  %%r9 ;"
-+		"movq 16(%2), %%r10 ;"
-+		"adcq 16(%1), %%r10 ;"
-+		"movq 24(%2), %%r11 ;"
-+		"adcq 24(%1), %%r11 ;"
-+		"mov      $0, %%ecx ;"
-+		"cmovc %%eax, %%ecx ;"
-+		"addq %%rcx,  %%r8  ;"
-+		"adcq    $0,  %%r9  ;"
-+		"movq  %%r9,  8(%0) ;"
-+		"adcq    $0, %%r10  ;"
-+		"movq %%r10, 16(%0) ;"
-+		"adcq    $0, %%r11  ;"
-+		"movq %%r11, 24(%0) ;"
-+		"mov     $0, %%ecx  ;"
-+		"cmovc %%eax, %%ecx ;"
-+		"addq %%rcx,  %%r8  ;"
-+		"movq  %%r8,   (%0) ;"
-+		:
-+		: "r"(c), "r"(a), "r"(b)
-+		: "memory", "cc", "%rax", "%rcx", "%r8", "%r9", "%r10", "%r11");
-+}
-+
-+static __always_inline void
-+sub_eltfp25519_1w(u64 *const c, const u64 *const a, const u64 *const b)
-+{
-+	asm volatile(
-+		"mov     $38, %%eax ;"
-+		"movq   (%1),  %%r8 ;"
-+		"subq   (%2),  %%r8 ;"
-+		"movq  8(%1),  %%r9 ;"
-+		"sbbq  8(%2),  %%r9 ;"
-+		"movq 16(%1), %%r10 ;"
-+		"sbbq 16(%2), %%r10 ;"
-+		"movq 24(%1), %%r11 ;"
-+		"sbbq 24(%2), %%r11 ;"
-+		"mov      $0, %%ecx ;"
-+		"cmovc %%eax, %%ecx ;"
-+		"subq %%rcx,  %%r8  ;"
-+		"sbbq    $0,  %%r9  ;"
-+		"movq  %%r9,  8(%0) ;"
-+		"sbbq    $0, %%r10  ;"
-+		"movq %%r10, 16(%0) ;"
-+		"sbbq    $0, %%r11  ;"
-+		"movq %%r11, 24(%0) ;"
-+		"mov     $0, %%ecx  ;"
-+		"cmovc %%eax, %%ecx ;"
-+		"subq %%rcx,  %%r8  ;"
-+		"movq  %%r8,   (%0) ;"
-+		:
-+		: "r"(c), "r"(a), "r"(b)
-+		: "memory", "cc", "%rax", "%rcx", "%r8", "%r9", "%r10", "%r11");
-+}
-+
-+/* Multiplication by a24 = (A+2)/4 = (486662+2)/4 = 121666 */
-+static __always_inline void
-+mul_a24_eltfp25519_1w(u64 *const c, const u64 *const a)
-+{
-+	const u64 a24 = 121666;
-+	asm volatile(
-+		"movq     %2, %%rdx ;"
-+		"mulx   (%1),  %%r8, %%r10 ;"
-+		"mulx  8(%1),  %%r9, %%r11 ;"
-+		"addq %%r10,  %%r9 ;"
-+		"mulx 16(%1), %%r10, %%rax ;"
-+		"adcq %%r11, %%r10 ;"
-+		"mulx 24(%1), %%r11, %%rcx ;"
-+		"adcq %%rax, %%r11 ;"
-+		/**************************/
-+		"adcq    $0, %%rcx ;"
-+		"movl   $38, %%edx ;" /* 2*c = 38 = 2^256 mod 2^255-19*/
-+		"imul %%rdx, %%rcx ;"
-+		"addq %%rcx,  %%r8 ;"
-+		"adcq    $0,  %%r9 ;"
-+		"movq  %%r9,  8(%0) ;"
-+		"adcq    $0, %%r10 ;"
-+		"movq %%r10, 16(%0) ;"
-+		"adcq    $0, %%r11 ;"
-+		"movq %%r11, 24(%0) ;"
-+		"mov     $0, %%ecx ;"
-+		"cmovc %%edx, %%ecx ;"
-+		"addq %%rcx,  %%r8 ;"
-+		"movq  %%r8,   (%0) ;"
-+		:
-+		: "r"(c), "r"(a), "r"(a24)
-+		: "memory", "cc", "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10",
-+		  "%r11");
-+}
-+
-+static void inv_eltfp25519_1w_adx(u64 *const c, const u64 *const a)
-+{
-+	struct {
-+		eltfp25519_1w_buffer buffer;
-+		eltfp25519_1w x0, x1, x2;
-+	} __aligned(32) m;
-+	u64 *T[4];
-+
-+	T[0] = m.x0;
-+	T[1] = c; /* x^(-1) */
-+	T[2] = m.x1;
-+	T[3] = m.x2;
-+
-+	copy_eltfp25519_1w(T[1], a);
-+	sqrn_eltfp25519_1w_adx(T[1], 1);
-+	copy_eltfp25519_1w(T[2], T[1]);
-+	sqrn_eltfp25519_1w_adx(T[2], 2);
-+	mul_eltfp25519_1w_adx(T[0], a, T[2]);
-+	mul_eltfp25519_1w_adx(T[1], T[1], T[0]);
-+	copy_eltfp25519_1w(T[2], T[1]);
-+	sqrn_eltfp25519_1w_adx(T[2], 1);
-+	mul_eltfp25519_1w_adx(T[0], T[0], T[2]);
-+	copy_eltfp25519_1w(T[2], T[0]);
-+	sqrn_eltfp25519_1w_adx(T[2], 5);
-+	mul_eltfp25519_1w_adx(T[0], T[0], T[2]);
-+	copy_eltfp25519_1w(T[2], T[0]);
-+	sqrn_eltfp25519_1w_adx(T[2], 10);
-+	mul_eltfp25519_1w_adx(T[2], T[2], T[0]);
-+	copy_eltfp25519_1w(T[3], T[2]);
-+	sqrn_eltfp25519_1w_adx(T[3], 20);
-+	mul_eltfp25519_1w_adx(T[3], T[3], T[2]);
-+	sqrn_eltfp25519_1w_adx(T[3], 10);
-+	mul_eltfp25519_1w_adx(T[3], T[3], T[0]);
-+	copy_eltfp25519_1w(T[0], T[3]);
-+	sqrn_eltfp25519_1w_adx(T[0], 50);
-+	mul_eltfp25519_1w_adx(T[0], T[0], T[3]);
-+	copy_eltfp25519_1w(T[2], T[0]);
-+	sqrn_eltfp25519_1w_adx(T[2], 100);
-+	mul_eltfp25519_1w_adx(T[2], T[2], T[0]);
-+	sqrn_eltfp25519_1w_adx(T[2], 50);
-+	mul_eltfp25519_1w_adx(T[2], T[2], T[3]);
-+	sqrn_eltfp25519_1w_adx(T[2], 5);
-+	mul_eltfp25519_1w_adx(T[1], T[1], T[2]);
-+
-+	memzero_explicit(&m, sizeof(m));
-+}
-+
-+static void inv_eltfp25519_1w_bmi2(u64 *const c, const u64 *const a)
-+{
-+	struct {
-+		eltfp25519_1w_buffer buffer;
-+		eltfp25519_1w x0, x1, x2;
-+	} __aligned(32) m;
-+	u64 *T[5];
-+
-+	T[0] = m.x0;
-+	T[1] = c; /* x^(-1) */
-+	T[2] = m.x1;
-+	T[3] = m.x2;
-+
-+	copy_eltfp25519_1w(T[1], a);
-+	sqrn_eltfp25519_1w_bmi2(T[1], 1);
-+	copy_eltfp25519_1w(T[2], T[1]);
-+	sqrn_eltfp25519_1w_bmi2(T[2], 2);
-+	mul_eltfp25519_1w_bmi2(T[0], a, T[2]);
-+	mul_eltfp25519_1w_bmi2(T[1], T[1], T[0]);
-+	copy_eltfp25519_1w(T[2], T[1]);
-+	sqrn_eltfp25519_1w_bmi2(T[2], 1);
-+	mul_eltfp25519_1w_bmi2(T[0], T[0], T[2]);
-+	copy_eltfp25519_1w(T[2], T[0]);
-+	sqrn_eltfp25519_1w_bmi2(T[2], 5);
-+	mul_eltfp25519_1w_bmi2(T[0], T[0], T[2]);
-+	copy_eltfp25519_1w(T[2], T[0]);
-+	sqrn_eltfp25519_1w_bmi2(T[2], 10);
-+	mul_eltfp25519_1w_bmi2(T[2], T[2], T[0]);
-+	copy_eltfp25519_1w(T[3], T[2]);
-+	sqrn_eltfp25519_1w_bmi2(T[3], 20);
-+	mul_eltfp25519_1w_bmi2(T[3], T[3], T[2]);
-+	sqrn_eltfp25519_1w_bmi2(T[3], 10);
-+	mul_eltfp25519_1w_bmi2(T[3], T[3], T[0]);
-+	copy_eltfp25519_1w(T[0], T[3]);
-+	sqrn_eltfp25519_1w_bmi2(T[0], 50);
-+	mul_eltfp25519_1w_bmi2(T[0], T[0], T[3]);
-+	copy_eltfp25519_1w(T[2], T[0]);
-+	sqrn_eltfp25519_1w_bmi2(T[2], 100);
-+	mul_eltfp25519_1w_bmi2(T[2], T[2], T[0]);
-+	sqrn_eltfp25519_1w_bmi2(T[2], 50);
-+	mul_eltfp25519_1w_bmi2(T[2], T[2], T[3]);
-+	sqrn_eltfp25519_1w_bmi2(T[2], 5);
-+	mul_eltfp25519_1w_bmi2(T[1], T[1], T[2]);
-+
-+	memzero_explicit(&m, sizeof(m));
-+}
-+
-+/* Given c, a 256-bit number, fred_eltfp25519_1w updates c
-+ * with a number such that 0 <= C < 2**255-19.
-+ */
-+static __always_inline void fred_eltfp25519_1w(u64 *const c)
-+{
-+	u64 tmp0 = 38, tmp1 = 19;
-+	asm volatile(
-+		"btrq   $63,    %3 ;" /* Put bit 255 in carry flag and clear */
-+		"cmovncl %k5,   %k4 ;" /* c[255] ? 38 : 19 */
-+
-+		/* Add either 19 or 38 to c */
-+		"addq    %4,   %0 ;"
-+		"adcq    $0,   %1 ;"
-+		"adcq    $0,   %2 ;"
-+		"adcq    $0,   %3 ;"
-+
-+		/* Test for bit 255 again; only triggered on overflow modulo 2^255-19 */
-+		"movl    $0,  %k4 ;"
-+		"cmovnsl %k5,  %k4 ;" /* c[255] ? 0 : 19 */
-+		"btrq   $63,   %3 ;" /* Clear bit 255 */
-+
-+		/* Subtract 19 if necessary */
-+		"subq    %4,   %0 ;"
-+		"sbbq    $0,   %1 ;"
-+		"sbbq    $0,   %2 ;"
-+		"sbbq    $0,   %3 ;"
-+
-+		: "+r"(c[0]), "+r"(c[1]), "+r"(c[2]), "+r"(c[3]), "+r"(tmp0),
-+		  "+r"(tmp1)
-+		:
-+		: "memory", "cc");
-+}
-+
-+static __always_inline void cswap(u8 bit, u64 *const px, u64 *const py)
-+{
-+	u64 temp;
-+	asm volatile(
-+		"test %9, %9 ;"
-+		"movq %0, %8 ;"
-+		"cmovnzq %4, %0 ;"
-+		"cmovnzq %8, %4 ;"
-+		"movq %1, %8 ;"
-+		"cmovnzq %5, %1 ;"
-+		"cmovnzq %8, %5 ;"
-+		"movq %2, %8 ;"
-+		"cmovnzq %6, %2 ;"
-+		"cmovnzq %8, %6 ;"
-+		"movq %3, %8 ;"
-+		"cmovnzq %7, %3 ;"
-+		"cmovnzq %8, %7 ;"
-+		: "+r"(px[0]), "+r"(px[1]), "+r"(px[2]), "+r"(px[3]),
-+		  "+r"(py[0]), "+r"(py[1]), "+r"(py[2]), "+r"(py[3]),
-+		  "=r"(temp)
-+		: "r"(bit)
-+		: "cc"
-+	);
-+}
-+
-+static __always_inline void cselect(u8 bit, u64 *const px, const u64 *const py)
-+{
-+	asm volatile(
-+		"test %4, %4 ;"
-+		"cmovnzq %5, %0 ;"
-+		"cmovnzq %6, %1 ;"
-+		"cmovnzq %7, %2 ;"
-+		"cmovnzq %8, %3 ;"
-+		: "+r"(px[0]), "+r"(px[1]), "+r"(px[2]), "+r"(px[3])
-+		: "r"(bit), "rm"(py[0]), "rm"(py[1]), "rm"(py[2]), "rm"(py[3])
-+		: "cc"
-+	);
-+}
-+
-+static void curve25519_adx(u8 shared[CURVE25519_KEY_SIZE],
-+			   const u8 private_key[CURVE25519_KEY_SIZE],
-+			   const u8 session_key[CURVE25519_KEY_SIZE])
-+{
-+	struct {
-+		u64 buffer[4 * NUM_WORDS_ELTFP25519];
-+		u64 coordinates[4 * NUM_WORDS_ELTFP25519];
-+		u64 workspace[6 * NUM_WORDS_ELTFP25519];
-+		u8 session[CURVE25519_KEY_SIZE];
-+		u8 private[CURVE25519_KEY_SIZE];
-+	} __aligned(32) m;
-+
-+	int i = 0, j = 0;
-+	u64 prev = 0;
-+	u64 *const X1 = (u64 *)m.session;
-+	u64 *const key = (u64 *)m.private;
-+	u64 *const Px = m.coordinates + 0;
-+	u64 *const Pz = m.coordinates + 4;
-+	u64 *const Qx = m.coordinates + 8;
-+	u64 *const Qz = m.coordinates + 12;
-+	u64 *const X2 = Qx;
-+	u64 *const Z2 = Qz;
-+	u64 *const X3 = Px;
-+	u64 *const Z3 = Pz;
-+	u64 *const X2Z2 = Qx;
-+	u64 *const X3Z3 = Px;
-+
-+	u64 *const A = m.workspace + 0;
-+	u64 *const B = m.workspace + 4;
-+	u64 *const D = m.workspace + 8;
-+	u64 *const C = m.workspace + 12;
-+	u64 *const DA = m.workspace + 16;
-+	u64 *const CB = m.workspace + 20;
-+	u64 *const AB = A;
-+	u64 *const DC = D;
-+	u64 *const DACB = DA;
-+
-+	memcpy(m.private, private_key, sizeof(m.private));
-+	memcpy(m.session, session_key, sizeof(m.session));
-+
-+	curve25519_clamp_secret(m.private);
-+
-+	/* As in the draft:
-+	 * When receiving such an array, implementations of curve25519
-+	 * MUST mask the most-significant bit in the final byte. This
-+	 * is done to preserve compatibility with point formats which
-+	 * reserve the sign bit for use in other protocols and to
-+	 * increase resistance to implementation fingerprinting
-+	 */
-+	m.session[CURVE25519_KEY_SIZE - 1] &= (1 << (255 % 8)) - 1;
-+
-+	copy_eltfp25519_1w(Px, X1);
-+	setzero_eltfp25519_1w(Pz);
-+	setzero_eltfp25519_1w(Qx);
-+	setzero_eltfp25519_1w(Qz);
-+
-+	Pz[0] = 1;
-+	Qx[0] = 1;
-+
-+	/* main-loop */
-+	prev = 0;
-+	j = 62;
-+	for (i = 3; i >= 0; --i) {
-+		while (j >= 0) {
-+			u64 bit = (key[i] >> j) & 0x1;
-+			u64 swap = bit ^ prev;
-+			prev = bit;
-+
-+			add_eltfp25519_1w_adx(A, X2, Z2);	/* A = (X2+Z2) */
-+			sub_eltfp25519_1w(B, X2, Z2);		/* B = (X2-Z2) */
-+			add_eltfp25519_1w_adx(C, X3, Z3);	/* C = (X3+Z3) */
-+			sub_eltfp25519_1w(D, X3, Z3);		/* D = (X3-Z3) */
-+			mul_eltfp25519_2w_adx(DACB, AB, DC);	/* [DA|CB] = [A|B]*[D|C] */
-+
-+			cselect(swap, A, C);
-+			cselect(swap, B, D);
-+
-+			sqr_eltfp25519_2w_adx(AB);		/* [AA|BB] = [A^2|B^2] */
-+			add_eltfp25519_1w_adx(X3, DA, CB);	/* X3 = (DA+CB) */
-+			sub_eltfp25519_1w(Z3, DA, CB);		/* Z3 = (DA-CB) */
-+			sqr_eltfp25519_2w_adx(X3Z3);		/* [X3|Z3] = [(DA+CB)|(DA+CB)]^2 */
-+
-+			copy_eltfp25519_1w(X2, B);		/* X2 = B^2 */
-+			sub_eltfp25519_1w(Z2, A, B);		/* Z2 = E = AA-BB */
-+
-+			mul_a24_eltfp25519_1w(B, Z2);		/* B = a24*E */
-+			add_eltfp25519_1w_adx(B, B, X2);	/* B = a24*E+B */
-+			mul_eltfp25519_2w_adx(X2Z2, X2Z2, AB);	/* [X2|Z2] = [B|E]*[A|a24*E+B] */
-+			mul_eltfp25519_1w_adx(Z3, Z3, X1);	/* Z3 = Z3*X1 */
-+			--j;
-+		}
-+		j = 63;
-+	}
-+
-+	inv_eltfp25519_1w_adx(A, Qz);
-+	mul_eltfp25519_1w_adx((u64 *)shared, Qx, A);
-+	fred_eltfp25519_1w((u64 *)shared);
-+
-+	memzero_explicit(&m, sizeof(m));
-+}
-+
-+static void curve25519_adx_base(u8 session_key[CURVE25519_KEY_SIZE],
-+				const u8 private_key[CURVE25519_KEY_SIZE])
-+{
-+	struct {
-+		u64 buffer[4 * NUM_WORDS_ELTFP25519];
-+		u64 coordinates[4 * NUM_WORDS_ELTFP25519];
-+		u64 workspace[4 * NUM_WORDS_ELTFP25519];
-+		u8 private[CURVE25519_KEY_SIZE];
-+	} __aligned(32) m;
-+
-+	const int ite[4] = { 64, 64, 64, 63 };
-+	const int q = 3;
-+	u64 swap = 1;
-+
-+	int i = 0, j = 0, k = 0;
-+	u64 *const key = (u64 *)m.private;
-+	u64 *const Ur1 = m.coordinates + 0;
-+	u64 *const Zr1 = m.coordinates + 4;
-+	u64 *const Ur2 = m.coordinates + 8;
-+	u64 *const Zr2 = m.coordinates + 12;
-+
-+	u64 *const UZr1 = m.coordinates + 0;
-+	u64 *const ZUr2 = m.coordinates + 8;
-+
-+	u64 *const A = m.workspace + 0;
-+	u64 *const B = m.workspace + 4;
-+	u64 *const C = m.workspace + 8;
-+	u64 *const D = m.workspace + 12;
-+
-+	u64 *const AB = m.workspace + 0;
-+	u64 *const CD = m.workspace + 8;
-+
-+	const u64 *const P = table_ladder_8k;
-+
-+	memcpy(m.private, private_key, sizeof(m.private));
-+
-+	curve25519_clamp_secret(m.private);
-+
-+	setzero_eltfp25519_1w(Ur1);
-+	setzero_eltfp25519_1w(Zr1);
-+	setzero_eltfp25519_1w(Zr2);
-+	Ur1[0] = 1;
-+	Zr1[0] = 1;
-+	Zr2[0] = 1;
-+
-+	/* G-S */
-+	Ur2[3] = 0x1eaecdeee27cab34UL;
-+	Ur2[2] = 0xadc7a0b9235d48e2UL;
-+	Ur2[1] = 0xbbf095ae14b2edf8UL;
-+	Ur2[0] = 0x7e94e1fec82faabdUL;
-+
-+	/* main-loop */
-+	j = q;
-+	for (i = 0; i < NUM_WORDS_ELTFP25519; ++i) {
-+		while (j < ite[i]) {
-+			u64 bit = (key[i] >> j) & 0x1;
-+			k = (64 * i + j - q);
-+			swap = swap ^ bit;
-+			cswap(swap, Ur1, Ur2);
-+			cswap(swap, Zr1, Zr2);
-+			swap = bit;
-+			/* Addition */
-+			sub_eltfp25519_1w(B, Ur1, Zr1);		/* B = Ur1-Zr1 */
-+			add_eltfp25519_1w_adx(A, Ur1, Zr1);	/* A = Ur1+Zr1 */
-+			mul_eltfp25519_1w_adx(C, &P[4 * k], B);	/* C = M0-B */
-+			sub_eltfp25519_1w(B, A, C);		/* B = (Ur1+Zr1) - M*(Ur1-Zr1) */
-+			add_eltfp25519_1w_adx(A, A, C);		/* A = (Ur1+Zr1) + M*(Ur1-Zr1) */
-+			sqr_eltfp25519_2w_adx(AB);		/* A = A^2      |  B = B^2 */
-+			mul_eltfp25519_2w_adx(UZr1, ZUr2, AB);	/* Ur1 = Zr2*A  |  Zr1 = Ur2*B */
-+			++j;
-+		}
-+		j = 0;
-+	}
-+
-+	/* Doubling */
-+	for (i = 0; i < q; ++i) {
-+		add_eltfp25519_1w_adx(A, Ur1, Zr1);	/*  A = Ur1+Zr1 */
-+		sub_eltfp25519_1w(B, Ur1, Zr1);		/*  B = Ur1-Zr1 */
-+		sqr_eltfp25519_2w_adx(AB);		/*  A = A**2     B = B**2 */
-+		copy_eltfp25519_1w(C, B);		/*  C = B */
-+		sub_eltfp25519_1w(B, A, B);		/*  B = A-B */
-+		mul_a24_eltfp25519_1w(D, B);		/*  D = my_a24*B */
-+		add_eltfp25519_1w_adx(D, D, C);		/*  D = D+C */
-+		mul_eltfp25519_2w_adx(UZr1, AB, CD);	/*  Ur1 = A*B   Zr1 = Zr1*A */
-+	}
-+
-+	/* Convert to affine coordinates */
-+	inv_eltfp25519_1w_adx(A, Zr1);
-+	mul_eltfp25519_1w_adx((u64 *)session_key, Ur1, A);
-+	fred_eltfp25519_1w((u64 *)session_key);
-+
-+	memzero_explicit(&m, sizeof(m));
-+}
-+
-+static void curve25519_bmi2(u8 shared[CURVE25519_KEY_SIZE],
-+			    const u8 private_key[CURVE25519_KEY_SIZE],
-+			    const u8 session_key[CURVE25519_KEY_SIZE])
-+{
-+	struct {
-+		u64 buffer[4 * NUM_WORDS_ELTFP25519];
-+		u64 coordinates[4 * NUM_WORDS_ELTFP25519];
-+		u64 workspace[6 * NUM_WORDS_ELTFP25519];
-+		u8 session[CURVE25519_KEY_SIZE];
-+		u8 private[CURVE25519_KEY_SIZE];
-+	} __aligned(32) m;
-+
-+	int i = 0, j = 0;
-+	u64 prev = 0;
-+	u64 *const X1 = (u64 *)m.session;
-+	u64 *const key = (u64 *)m.private;
-+	u64 *const Px = m.coordinates + 0;
-+	u64 *const Pz = m.coordinates + 4;
-+	u64 *const Qx = m.coordinates + 8;
-+	u64 *const Qz = m.coordinates + 12;
-+	u64 *const X2 = Qx;
-+	u64 *const Z2 = Qz;
-+	u64 *const X3 = Px;
-+	u64 *const Z3 = Pz;
-+	u64 *const X2Z2 = Qx;
-+	u64 *const X3Z3 = Px;
-+
-+	u64 *const A = m.workspace + 0;
-+	u64 *const B = m.workspace + 4;
-+	u64 *const D = m.workspace + 8;
-+	u64 *const C = m.workspace + 12;
-+	u64 *const DA = m.workspace + 16;
-+	u64 *const CB = m.workspace + 20;
-+	u64 *const AB = A;
-+	u64 *const DC = D;
-+	u64 *const DACB = DA;
-+
-+	memcpy(m.private, private_key, sizeof(m.private));
-+	memcpy(m.session, session_key, sizeof(m.session));
-+
-+	curve25519_clamp_secret(m.private);
-+
-+	/* As in the draft:
-+	 * When receiving such an array, implementations of curve25519
-+	 * MUST mask the most-significant bit in the final byte. This
-+	 * is done to preserve compatibility with point formats which
-+	 * reserve the sign bit for use in other protocols and to
-+	 * increase resistance to implementation fingerprinting
-+	 */
-+	m.session[CURVE25519_KEY_SIZE - 1] &= (1 << (255 % 8)) - 1;
-+
-+	copy_eltfp25519_1w(Px, X1);
-+	setzero_eltfp25519_1w(Pz);
-+	setzero_eltfp25519_1w(Qx);
-+	setzero_eltfp25519_1w(Qz);
-+
-+	Pz[0] = 1;
-+	Qx[0] = 1;
-+
-+	/* main-loop */
-+	prev = 0;
-+	j = 62;
-+	for (i = 3; i >= 0; --i) {
-+		while (j >= 0) {
-+			u64 bit = (key[i] >> j) & 0x1;
-+			u64 swap = bit ^ prev;
-+			prev = bit;
-+
-+			add_eltfp25519_1w_bmi2(A, X2, Z2);	/* A = (X2+Z2) */
-+			sub_eltfp25519_1w(B, X2, Z2);		/* B = (X2-Z2) */
-+			add_eltfp25519_1w_bmi2(C, X3, Z3);	/* C = (X3+Z3) */
-+			sub_eltfp25519_1w(D, X3, Z3);		/* D = (X3-Z3) */
-+			mul_eltfp25519_2w_bmi2(DACB, AB, DC);	/* [DA|CB] = [A|B]*[D|C] */
-+
-+			cselect(swap, A, C);
-+			cselect(swap, B, D);
-+
-+			sqr_eltfp25519_2w_bmi2(AB);		/* [AA|BB] = [A^2|B^2] */
-+			add_eltfp25519_1w_bmi2(X3, DA, CB);	/* X3 = (DA+CB) */
-+			sub_eltfp25519_1w(Z3, DA, CB);		/* Z3 = (DA-CB) */
-+			sqr_eltfp25519_2w_bmi2(X3Z3);		/* [X3|Z3] = [(DA+CB)|(DA+CB)]^2 */
-+
-+			copy_eltfp25519_1w(X2, B);		/* X2 = B^2 */
-+			sub_eltfp25519_1w(Z2, A, B);		/* Z2 = E = AA-BB */
-+
-+			mul_a24_eltfp25519_1w(B, Z2);		/* B = a24*E */
-+			add_eltfp25519_1w_bmi2(B, B, X2);	/* B = a24*E+B */
-+			mul_eltfp25519_2w_bmi2(X2Z2, X2Z2, AB);	/* [X2|Z2] = [B|E]*[A|a24*E+B] */
-+			mul_eltfp25519_1w_bmi2(Z3, Z3, X1);	/* Z3 = Z3*X1 */
-+			--j;
-+		}
-+		j = 63;
-+	}
-+
-+	inv_eltfp25519_1w_bmi2(A, Qz);
-+	mul_eltfp25519_1w_bmi2((u64 *)shared, Qx, A);
-+	fred_eltfp25519_1w((u64 *)shared);
-+
-+	memzero_explicit(&m, sizeof(m));
-+}
-+
-+static void curve25519_bmi2_base(u8 session_key[CURVE25519_KEY_SIZE],
-+				 const u8 private_key[CURVE25519_KEY_SIZE])
-+{
-+	struct {
-+		u64 buffer[4 * NUM_WORDS_ELTFP25519];
-+		u64 coordinates[4 * NUM_WORDS_ELTFP25519];
-+		u64 workspace[4 * NUM_WORDS_ELTFP25519];
-+		u8 private[CURVE25519_KEY_SIZE];
-+	} __aligned(32) m;
-+
-+	const int ite[4] = { 64, 64, 64, 63 };
-+	const int q = 3;
-+	u64 swap = 1;
-+
-+	int i = 0, j = 0, k = 0;
-+	u64 *const key = (u64 *)m.private;
-+	u64 *const Ur1 = m.coordinates + 0;
-+	u64 *const Zr1 = m.coordinates + 4;
-+	u64 *const Ur2 = m.coordinates + 8;
-+	u64 *const Zr2 = m.coordinates + 12;
-+
-+	u64 *const UZr1 = m.coordinates + 0;
-+	u64 *const ZUr2 = m.coordinates + 8;
-+
-+	u64 *const A = m.workspace + 0;
-+	u64 *const B = m.workspace + 4;
-+	u64 *const C = m.workspace + 8;
-+	u64 *const D = m.workspace + 12;
-+
-+	u64 *const AB = m.workspace + 0;
-+	u64 *const CD = m.workspace + 8;
-+
-+	const u64 *const P = table_ladder_8k;
-+
-+	memcpy(m.private, private_key, sizeof(m.private));
-+
-+	curve25519_clamp_secret(m.private);
-+
-+	setzero_eltfp25519_1w(Ur1);
-+	setzero_eltfp25519_1w(Zr1);
-+	setzero_eltfp25519_1w(Zr2);
-+	Ur1[0] = 1;
-+	Zr1[0] = 1;
-+	Zr2[0] = 1;
-+
-+	/* G-S */
-+	Ur2[3] = 0x1eaecdeee27cab34UL;
-+	Ur2[2] = 0xadc7a0b9235d48e2UL;
-+	Ur2[1] = 0xbbf095ae14b2edf8UL;
-+	Ur2[0] = 0x7e94e1fec82faabdUL;
-+
-+	/* main-loop */
-+	j = q;
-+	for (i = 0; i < NUM_WORDS_ELTFP25519; ++i) {
-+		while (j < ite[i]) {
-+			u64 bit = (key[i] >> j) & 0x1;
-+			k = (64 * i + j - q);
-+			swap = swap ^ bit;
-+			cswap(swap, Ur1, Ur2);
-+			cswap(swap, Zr1, Zr2);
-+			swap = bit;
-+			/* Addition */
-+			sub_eltfp25519_1w(B, Ur1, Zr1);		/* B = Ur1-Zr1 */
-+			add_eltfp25519_1w_bmi2(A, Ur1, Zr1);	/* A = Ur1+Zr1 */
-+			mul_eltfp25519_1w_bmi2(C, &P[4 * k], B);/* C = M0-B */
-+			sub_eltfp25519_1w(B, A, C);		/* B = (Ur1+Zr1) - M*(Ur1-Zr1) */
-+			add_eltfp25519_1w_bmi2(A, A, C);	/* A = (Ur1+Zr1) + M*(Ur1-Zr1) */
-+			sqr_eltfp25519_2w_bmi2(AB);		/* A = A^2      |  B = B^2 */
-+			mul_eltfp25519_2w_bmi2(UZr1, ZUr2, AB);	/* Ur1 = Zr2*A  |  Zr1 = Ur2*B */
-+			++j;
-+		}
-+		j = 0;
-+	}
-+
-+	/* Doubling */
-+	for (i = 0; i < q; ++i) {
-+		add_eltfp25519_1w_bmi2(A, Ur1, Zr1);	/*  A = Ur1+Zr1 */
-+		sub_eltfp25519_1w(B, Ur1, Zr1);		/*  B = Ur1-Zr1 */
-+		sqr_eltfp25519_2w_bmi2(AB);		/*  A = A**2     B = B**2 */
-+		copy_eltfp25519_1w(C, B);		/*  C = B */
-+		sub_eltfp25519_1w(B, A, B);		/*  B = A-B */
-+		mul_a24_eltfp25519_1w(D, B);		/*  D = my_a24*B */
-+		add_eltfp25519_1w_bmi2(D, D, C);	/*  D = D+C */
-+		mul_eltfp25519_2w_bmi2(UZr1, AB, CD);	/*  Ur1 = A*B   Zr1 = Zr1*A */
-+	}
-+
-+	/* Convert to affine coordinates */
-+	inv_eltfp25519_1w_bmi2(A, Zr1);
-+	mul_eltfp25519_1w_bmi2((u64 *)session_key, Ur1, A);
-+	fred_eltfp25519_1w((u64 *)session_key);
-+
-+	memzero_explicit(&m, sizeof(m));
-+}
-+
-+void curve25519_arch(u8 mypublic[CURVE25519_KEY_SIZE],
-+		     const u8 secret[CURVE25519_KEY_SIZE],
-+		     const u8 basepoint[CURVE25519_KEY_SIZE])
-+{
-+	if (static_branch_likely(&curve25519_use_adx))
-+		curve25519_adx(mypublic, secret, basepoint);
-+	else if (static_branch_likely(&curve25519_use_bmi2))
-+		curve25519_bmi2(mypublic, secret, basepoint);
-+	else
-+		curve25519_generic(mypublic, secret, basepoint);
-+}
-+EXPORT_SYMBOL(curve25519_arch);
-+
-+void curve25519_base_arch(u8 pub[CURVE25519_KEY_SIZE],
-+			  const u8 secret[CURVE25519_KEY_SIZE])
-+{
-+	if (static_branch_likely(&curve25519_use_adx))
-+		curve25519_adx_base(pub, secret);
-+	else if (static_branch_likely(&curve25519_use_bmi2))
-+		curve25519_bmi2_base(pub, secret);
-+	else
-+		curve25519_generic(pub, secret, curve25519_base_point);
-+}
-+EXPORT_SYMBOL(curve25519_base_arch);
-+
-+static int curve25519_set_secret(struct crypto_kpp *tfm, const void *buf,
-+				 unsigned int len)
-+{
-+	u8 *secret = kpp_tfm_ctx(tfm);
-+
-+	if (!len)
-+		curve25519_generate_secret(secret);
-+	else if (len == CURVE25519_KEY_SIZE &&
-+		 crypto_memneq(buf, curve25519_null_point, CURVE25519_KEY_SIZE))
-+		memcpy(secret, buf, CURVE25519_KEY_SIZE);
-+	else
-+		return -EINVAL;
-+	return 0;
-+}
-+
-+static int curve25519_generate_public_key(struct kpp_request *req)
-+{
-+	struct crypto_kpp *tfm = crypto_kpp_reqtfm(req);
-+	const u8 *secret = kpp_tfm_ctx(tfm);
-+	u8 buf[CURVE25519_KEY_SIZE];
-+	int copied, nbytes;
-+
-+	if (req->src)
-+		return -EINVAL;
-+
-+	curve25519_base_arch(buf, secret);
-+
-+	/* might want less than we've got */
-+	nbytes = min_t(size_t, CURVE25519_KEY_SIZE, req->dst_len);
-+	copied = sg_copy_from_buffer(req->dst, sg_nents_for_len(req->dst,
-+								nbytes),
-+				     buf, nbytes);
-+	if (copied != nbytes)
-+		return -EINVAL;
-+	return 0;
-+}
-+
-+static int curve25519_compute_shared_secret(struct kpp_request *req)
-+{
-+	struct crypto_kpp *tfm = crypto_kpp_reqtfm(req);
-+	const u8 *secret = kpp_tfm_ctx(tfm);
-+	u8 public_key[CURVE25519_KEY_SIZE];
-+	u8 buf[CURVE25519_KEY_SIZE];
-+	int copied, nbytes;
-+
-+	if (!req->src)
-+		return -EINVAL;
-+
-+	copied = sg_copy_to_buffer(req->src,
-+				   sg_nents_for_len(req->src,
-+						    CURVE25519_KEY_SIZE),
-+				   public_key, CURVE25519_KEY_SIZE);
-+	if (copied != CURVE25519_KEY_SIZE)
-+		return -EINVAL;
-+
-+	curve25519_arch(buf, secret, public_key);
-+
-+	/* might want less than we've got */
-+	nbytes = min_t(size_t, CURVE25519_KEY_SIZE, req->dst_len);
-+	copied = sg_copy_from_buffer(req->dst, sg_nents_for_len(req->dst,
-+								nbytes),
-+				     buf, nbytes);
-+	if (copied != nbytes)
-+		return -EINVAL;
-+	return 0;
-+}
-+
-+static unsigned int curve25519_max_size(struct crypto_kpp *tfm)
-+{
-+	return CURVE25519_KEY_SIZE;
-+}
-+
-+static struct kpp_alg curve25519_alg = {
-+	.base.cra_name		= "curve25519",
-+	.base.cra_driver_name	= "curve25519-x86",
-+	.base.cra_priority	= 200,
-+	.base.cra_module	= THIS_MODULE,
-+	.base.cra_ctxsize	= CURVE25519_KEY_SIZE,
-+
-+	.set_secret		= curve25519_set_secret,
-+	.generate_public_key	= curve25519_generate_public_key,
-+	.compute_shared_secret	= curve25519_compute_shared_secret,
-+	.max_size		= curve25519_max_size,
-+};
-+
-+static int __init curve25519_mod_init(void)
-+{
-+	if (boot_cpu_has(X86_FEATURE_BMI2))
-+		static_branch_enable(&curve25519_use_bmi2);
-+	else if (boot_cpu_has(X86_FEATURE_ADX))
-+		static_branch_enable(&curve25519_use_adx);
-+	else
-+		return 0;
-+	return crypto_register_kpp(&curve25519_alg);
-+}
-+
-+static void __exit curve25519_mod_exit(void)
-+{
-+	if (boot_cpu_has(X86_FEATURE_BMI2) ||
-+	    boot_cpu_has(X86_FEATURE_ADX))
-+		crypto_unregister_kpp(&curve25519_alg);
-+}
-+
-+module_init(curve25519_mod_init);
-+module_exit(curve25519_mod_exit);
-+
-+MODULE_ALIAS_CRYPTO("curve25519");
-+MODULE_ALIAS_CRYPTO("curve25519-x86");
-+MODULE_LICENSE("GPL v2");
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -269,6 +269,12 @@ config CRYPTO_CURVE25519
- 	select CRYPTO_KPP
- 	select CRYPTO_LIB_CURVE25519_GENERIC
- 
-+config CRYPTO_CURVE25519_X86
-+	tristate "x86_64 accelerated Curve25519 scalar multiplication library"
-+	depends on X86 && 64BIT
-+	select CRYPTO_LIB_CURVE25519_GENERIC
-+	select CRYPTO_ARCH_HAVE_LIB_CURVE25519
-+
- comment "Authenticated Encryption with Associated Data"
- 
- config CRYPTO_CCM
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0030-crypto-arm-curve25519-import-Bernstein-and-Schwabe-s.patch b/target/linux/generic/backport-5.4/080-wireguard-0030-crypto-arm-curve25519-import-Bernstein-and-Schwabe-s.patch
deleted file mode 100644
index 8fda25d60a..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0030-crypto-arm-curve25519-import-Bernstein-and-Schwabe-s.patch
+++ /dev/null
@@ -1,2135 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 8 Nov 2019 13:22:37 +0100
-Subject: [PATCH] crypto: arm/curve25519 - import Bernstein and Schwabe's
- Curve25519 ARM implementation
-
-commit f0fb006b604f98e2309a30f34ef455ac734f7c1c upstream.
-
-This comes from Dan Bernstein and Peter Schwabe's public domain NEON
-code, and is included here in raw form so that subsequent commits that
-fix these up for the kernel can see how it has changed. This code does
-have some entirely cosmetic formatting differences, adding indentation
-and so forth, so that when we actually port it for use in the kernel in
-the subsequent commit, it's obvious what's changed in the process.
-
-This code originates from SUPERCOP 20180818, available at
-<https://bench.cr.yp.to/supercop.html>.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/curve25519-core.S | 2105 +++++++++++++++++++++++++++++
- 1 file changed, 2105 insertions(+)
- create mode 100644 arch/arm/crypto/curve25519-core.S
-
---- /dev/null
-+++ b/arch/arm/crypto/curve25519-core.S
-@@ -0,0 +1,2105 @@
-+/*
-+ * Public domain code from Daniel J. Bernstein and Peter Schwabe, from
-+ * SUPERCOP's curve25519/neon2/scalarmult.s.
-+ */
-+
-+.fpu neon
-+.text
-+.align 4
-+.global _crypto_scalarmult_curve25519_neon2
-+.global crypto_scalarmult_curve25519_neon2
-+.type _crypto_scalarmult_curve25519_neon2 STT_FUNC
-+.type crypto_scalarmult_curve25519_neon2 STT_FUNC
-+	_crypto_scalarmult_curve25519_neon2:
-+	crypto_scalarmult_curve25519_neon2:
-+	vpush		{q4, q5, q6, q7}
-+	mov		r12, sp
-+	sub		sp, sp, #736
-+	and		sp, sp, #0xffffffe0
-+	strd		r4, [sp, #0]
-+	strd		r6, [sp, #8]
-+	strd		r8, [sp, #16]
-+	strd		r10, [sp, #24]
-+	str		r12, [sp, #480]
-+	str		r14, [sp, #484]
-+	mov		r0, r0
-+	mov		r1, r1
-+	mov		r2, r2
-+	add		r3, sp, #32
-+	ldr		r4, =0
-+	ldr		r5, =254
-+	vmov.i32	q0, #1
-+	vshr.u64	q1, q0, #7
-+	vshr.u64	q0, q0, #8
-+	vmov.i32	d4, #19
-+	vmov.i32	d5, #38
-+	add		r6, sp, #512
-+	vst1.8		{d2-d3}, [r6, : 128]
-+	add		r6, sp, #528
-+	vst1.8		{d0-d1}, [r6, : 128]
-+	add		r6, sp, #544
-+	vst1.8		{d4-d5}, [r6, : 128]
-+	add		r6, r3, #0
-+	vmov.i32	q2, #0
-+	vst1.8		{d4-d5}, [r6, : 128]!
-+	vst1.8		{d4-d5}, [r6, : 128]!
-+	vst1.8		d4, [r6, : 64]
-+	add		r6, r3, #0
-+	ldr		r7, =960
-+	sub		r7, r7, #2
-+	neg		r7, r7
-+	sub		r7, r7, r7, LSL #7
-+	str		r7, [r6]
-+	add		r6, sp, #704
-+	vld1.8		{d4-d5}, [r1]!
-+	vld1.8		{d6-d7}, [r1]
-+	vst1.8		{d4-d5}, [r6, : 128]!
-+	vst1.8		{d6-d7}, [r6, : 128]
-+	sub		r1, r6, #16
-+	ldrb		r6, [r1]
-+	and		r6, r6, #248
-+	strb		r6, [r1]
-+	ldrb		r6, [r1, #31]
-+	and		r6, r6, #127
-+	orr		r6, r6, #64
-+	strb		r6, [r1, #31]
-+	vmov.i64	q2, #0xffffffff
-+	vshr.u64	q3, q2, #7
-+	vshr.u64	q2, q2, #6
-+	vld1.8		{d8}, [r2]
-+	vld1.8		{d10}, [r2]
-+	add		r2, r2, #6
-+	vld1.8		{d12}, [r2]
-+	vld1.8		{d14}, [r2]
-+	add		r2, r2, #6
-+	vld1.8		{d16}, [r2]
-+	add		r2, r2, #4
-+	vld1.8		{d18}, [r2]
-+	vld1.8		{d20}, [r2]
-+	add		r2, r2, #6
-+	vld1.8		{d22}, [r2]
-+	add		r2, r2, #2
-+	vld1.8		{d24}, [r2]
-+	vld1.8		{d26}, [r2]
-+	vshr.u64	q5, q5, #26
-+	vshr.u64	q6, q6, #3
-+	vshr.u64	q7, q7, #29
-+	vshr.u64	q8, q8, #6
-+	vshr.u64	q10, q10, #25
-+	vshr.u64	q11, q11, #3
-+	vshr.u64	q12, q12, #12
-+	vshr.u64	q13, q13, #38
-+	vand		q4, q4, q2
-+	vand		q6, q6, q2
-+	vand		q8, q8, q2
-+	vand		q10, q10, q2
-+	vand		q2, q12, q2
-+	vand		q5, q5, q3
-+	vand		q7, q7, q3
-+	vand		q9, q9, q3
-+	vand		q11, q11, q3
-+	vand		q3, q13, q3
-+	add		r2, r3, #48
-+	vadd.i64	q12, q4, q1
-+	vadd.i64	q13, q10, q1
-+	vshr.s64	q12, q12, #26
-+	vshr.s64	q13, q13, #26
-+	vadd.i64	q5, q5, q12
-+	vshl.i64	q12, q12, #26
-+	vadd.i64	q14, q5, q0
-+	vadd.i64	q11, q11, q13
-+	vshl.i64	q13, q13, #26
-+	vadd.i64	q15, q11, q0
-+	vsub.i64	q4, q4, q12
-+	vshr.s64	q12, q14, #25
-+	vsub.i64	q10, q10, q13
-+	vshr.s64	q13, q15, #25
-+	vadd.i64	q6, q6, q12
-+	vshl.i64	q12, q12, #25
-+	vadd.i64	q14, q6, q1
-+	vadd.i64	q2, q2, q13
-+	vsub.i64	q5, q5, q12
-+	vshr.s64	q12, q14, #26
-+	vshl.i64	q13, q13, #25
-+	vadd.i64	q14, q2, q1
-+	vadd.i64	q7, q7, q12
-+	vshl.i64	q12, q12, #26
-+	vadd.i64	q15, q7, q0
-+	vsub.i64	q11, q11, q13
-+	vshr.s64	q13, q14, #26
-+	vsub.i64	q6, q6, q12
-+	vshr.s64	q12, q15, #25
-+	vadd.i64	q3, q3, q13
-+	vshl.i64	q13, q13, #26
-+	vadd.i64	q14, q3, q0
-+	vadd.i64	q8, q8, q12
-+	vshl.i64	q12, q12, #25
-+	vadd.i64	q15, q8, q1
-+	add		r2, r2, #8
-+	vsub.i64	q2, q2, q13
-+	vshr.s64	q13, q14, #25
-+	vsub.i64	q7, q7, q12
-+	vshr.s64	q12, q15, #26
-+	vadd.i64	q14, q13, q13
-+	vadd.i64	q9, q9, q12
-+	vtrn.32		d12, d14
-+	vshl.i64	q12, q12, #26
-+	vtrn.32		d13, d15
-+	vadd.i64	q0, q9, q0
-+	vadd.i64	q4, q4, q14
-+	vst1.8		d12, [r2, : 64]!
-+	vshl.i64	q6, q13, #4
-+	vsub.i64	q7, q8, q12
-+	vshr.s64	q0, q0, #25
-+	vadd.i64	q4, q4, q6
-+	vadd.i64	q6, q10, q0
-+	vshl.i64	q0, q0, #25
-+	vadd.i64	q8, q6, q1
-+	vadd.i64	q4, q4, q13
-+	vshl.i64	q10, q13, #25
-+	vadd.i64	q1, q4, q1
-+	vsub.i64	q0, q9, q0
-+	vshr.s64	q8, q8, #26
-+	vsub.i64	q3, q3, q10
-+	vtrn.32		d14, d0
-+	vshr.s64	q1, q1, #26
-+	vtrn.32		d15, d1
-+	vadd.i64	q0, q11, q8
-+	vst1.8		d14, [r2, : 64]
-+	vshl.i64	q7, q8, #26
-+	vadd.i64	q5, q5, q1
-+	vtrn.32		d4, d6
-+	vshl.i64	q1, q1, #26
-+	vtrn.32		d5, d7
-+	vsub.i64	q3, q6, q7
-+	add		r2, r2, #16
-+	vsub.i64	q1, q4, q1
-+	vst1.8		d4, [r2, : 64]
-+	vtrn.32		d6, d0
-+	vtrn.32		d7, d1
-+	sub		r2, r2, #8
-+	vtrn.32		d2, d10
-+	vtrn.32		d3, d11
-+	vst1.8		d6, [r2, : 64]
-+	sub		r2, r2, #24
-+	vst1.8		d2, [r2, : 64]
-+	add		r2, r3, #96
-+	vmov.i32	q0, #0
-+	vmov.i64	d2, #0xff
-+	vmov.i64	d3, #0
-+	vshr.u32	q1, q1, #7
-+	vst1.8		{d2-d3}, [r2, : 128]!
-+	vst1.8		{d0-d1}, [r2, : 128]!
-+	vst1.8		d0, [r2, : 64]
-+	add		r2, r3, #144
-+	vmov.i32	q0, #0
-+	vst1.8		{d0-d1}, [r2, : 128]!
-+	vst1.8		{d0-d1}, [r2, : 128]!
-+	vst1.8		d0, [r2, : 64]
-+	add		r2, r3, #240
-+	vmov.i32	q0, #0
-+	vmov.i64	d2, #0xff
-+	vmov.i64	d3, #0
-+	vshr.u32	q1, q1, #7
-+	vst1.8		{d2-d3}, [r2, : 128]!
-+	vst1.8		{d0-d1}, [r2, : 128]!
-+	vst1.8		d0, [r2, : 64]
-+	add		r2, r3, #48
-+	add		r6, r3, #192
-+	vld1.8		{d0-d1}, [r2, : 128]!
-+	vld1.8		{d2-d3}, [r2, : 128]!
-+	vld1.8		{d4}, [r2, : 64]
-+	vst1.8		{d0-d1}, [r6, : 128]!
-+	vst1.8		{d2-d3}, [r6, : 128]!
-+	vst1.8		d4, [r6, : 64]
-+._mainloop:
-+	mov		r2, r5, LSR #3
-+	and		r6, r5, #7
-+	ldrb		r2, [r1, r2]
-+	mov		r2, r2, LSR r6
-+	and		r2, r2, #1
-+	str		r5, [sp, #488]
-+	eor		r4, r4, r2
-+	str		r2, [sp, #492]
-+	neg		r2, r4
-+	add		r4, r3, #96
-+	add		r5, r3, #192
-+	add		r6, r3, #144
-+	vld1.8		{d8-d9}, [r4, : 128]!
-+	add		r7, r3, #240
-+	vld1.8		{d10-d11}, [r5, : 128]!
-+	veor		q6, q4, q5
-+	vld1.8		{d14-d15}, [r6, : 128]!
-+	vdup.i32	q8, r2
-+	vld1.8		{d18-d19}, [r7, : 128]!
-+	veor		q10, q7, q9
-+	vld1.8		{d22-d23}, [r4, : 128]!
-+	vand		q6, q6, q8
-+	vld1.8		{d24-d25}, [r5, : 128]!
-+	vand		q10, q10, q8
-+	vld1.8		{d26-d27}, [r6, : 128]!
-+	veor		q4, q4, q6
-+	vld1.8		{d28-d29}, [r7, : 128]!
-+	veor		q5, q5, q6
-+	vld1.8		{d0}, [r4, : 64]
-+	veor		q6, q7, q10
-+	vld1.8		{d2}, [r5, : 64]
-+	veor		q7, q9, q10
-+	vld1.8		{d4}, [r6, : 64]
-+	veor		q9, q11, q12
-+	vld1.8		{d6}, [r7, : 64]
-+	veor		q10, q0, q1
-+	sub		r2, r4, #32
-+	vand		q9, q9, q8
-+	sub		r4, r5, #32
-+	vand		q10, q10, q8
-+	sub		r5, r6, #32
-+	veor		q11, q11, q9
-+	sub		r6, r7, #32
-+	veor		q0, q0, q10
-+	veor		q9, q12, q9
-+	veor		q1, q1, q10
-+	veor		q10, q13, q14
-+	veor		q12, q2, q3
-+	vand		q10, q10, q8
-+	vand		q8, q12, q8
-+	veor		q12, q13, q10
-+	veor		q2, q2, q8
-+	veor		q10, q14, q10
-+	veor		q3, q3, q8
-+	vadd.i32	q8, q4, q6
-+	vsub.i32	q4, q4, q6
-+	vst1.8		{d16-d17}, [r2, : 128]!
-+	vadd.i32	q6, q11, q12
-+	vst1.8		{d8-d9}, [r5, : 128]!
-+	vsub.i32	q4, q11, q12
-+	vst1.8		{d12-d13}, [r2, : 128]!
-+	vadd.i32	q6, q0, q2
-+	vst1.8		{d8-d9}, [r5, : 128]!
-+	vsub.i32	q0, q0, q2
-+	vst1.8		d12, [r2, : 64]
-+	vadd.i32	q2, q5, q7
-+	vst1.8		d0, [r5, : 64]
-+	vsub.i32	q0, q5, q7
-+	vst1.8		{d4-d5}, [r4, : 128]!
-+	vadd.i32	q2, q9, q10
-+	vst1.8		{d0-d1}, [r6, : 128]!
-+	vsub.i32	q0, q9, q10
-+	vst1.8		{d4-d5}, [r4, : 128]!
-+	vadd.i32	q2, q1, q3
-+	vst1.8		{d0-d1}, [r6, : 128]!
-+	vsub.i32	q0, q1, q3
-+	vst1.8		d4, [r4, : 64]
-+	vst1.8		d0, [r6, : 64]
-+	add		r2, sp, #544
-+	add		r4, r3, #96
-+	add		r5, r3, #144
-+	vld1.8		{d0-d1}, [r2, : 128]
-+	vld1.8		{d2-d3}, [r4, : 128]!
-+	vld1.8		{d4-d5}, [r5, : 128]!
-+	vzip.i32	q1, q2
-+	vld1.8		{d6-d7}, [r4, : 128]!
-+	vld1.8		{d8-d9}, [r5, : 128]!
-+	vshl.i32	q5, q1, #1
-+	vzip.i32	q3, q4
-+	vshl.i32	q6, q2, #1
-+	vld1.8		{d14}, [r4, : 64]
-+	vshl.i32	q8, q3, #1
-+	vld1.8		{d15}, [r5, : 64]
-+	vshl.i32	q9, q4, #1
-+	vmul.i32	d21, d7, d1
-+	vtrn.32		d14, d15
-+	vmul.i32	q11, q4, q0
-+	vmul.i32	q0, q7, q0
-+	vmull.s32	q12, d2, d2
-+	vmlal.s32	q12, d11, d1
-+	vmlal.s32	q12, d12, d0
-+	vmlal.s32	q12, d13, d23
-+	vmlal.s32	q12, d16, d22
-+	vmlal.s32	q12, d7, d21
-+	vmull.s32	q10, d2, d11
-+	vmlal.s32	q10, d4, d1
-+	vmlal.s32	q10, d13, d0
-+	vmlal.s32	q10, d6, d23
-+	vmlal.s32	q10, d17, d22
-+	vmull.s32	q13, d10, d4
-+	vmlal.s32	q13, d11, d3
-+	vmlal.s32	q13, d13, d1
-+	vmlal.s32	q13, d16, d0
-+	vmlal.s32	q13, d17, d23
-+	vmlal.s32	q13, d8, d22
-+	vmull.s32	q1, d10, d5
-+	vmlal.s32	q1, d11, d4
-+	vmlal.s32	q1, d6, d1
-+	vmlal.s32	q1, d17, d0
-+	vmlal.s32	q1, d8, d23
-+	vmull.s32	q14, d10, d6
-+	vmlal.s32	q14, d11, d13
-+	vmlal.s32	q14, d4, d4
-+	vmlal.s32	q14, d17, d1
-+	vmlal.s32	q14, d18, d0
-+	vmlal.s32	q14, d9, d23
-+	vmull.s32	q11, d10, d7
-+	vmlal.s32	q11, d11, d6
-+	vmlal.s32	q11, d12, d5
-+	vmlal.s32	q11, d8, d1
-+	vmlal.s32	q11, d19, d0
-+	vmull.s32	q15, d10, d8
-+	vmlal.s32	q15, d11, d17
-+	vmlal.s32	q15, d12, d6
-+	vmlal.s32	q15, d13, d5
-+	vmlal.s32	q15, d19, d1
-+	vmlal.s32	q15, d14, d0
-+	vmull.s32	q2, d10, d9
-+	vmlal.s32	q2, d11, d8
-+	vmlal.s32	q2, d12, d7
-+	vmlal.s32	q2, d13, d6
-+	vmlal.s32	q2, d14, d1
-+	vmull.s32	q0, d15, d1
-+	vmlal.s32	q0, d10, d14
-+	vmlal.s32	q0, d11, d19
-+	vmlal.s32	q0, d12, d8
-+	vmlal.s32	q0, d13, d17
-+	vmlal.s32	q0, d6, d6
-+	add		r2, sp, #512
-+	vld1.8		{d18-d19}, [r2, : 128]
-+	vmull.s32	q3, d16, d7
-+	vmlal.s32	q3, d10, d15
-+	vmlal.s32	q3, d11, d14
-+	vmlal.s32	q3, d12, d9
-+	vmlal.s32	q3, d13, d8
-+	add		r2, sp, #528
-+	vld1.8		{d8-d9}, [r2, : 128]
-+	vadd.i64	q5, q12, q9
-+	vadd.i64	q6, q15, q9
-+	vshr.s64	q5, q5, #26
-+	vshr.s64	q6, q6, #26
-+	vadd.i64	q7, q10, q5
-+	vshl.i64	q5, q5, #26
-+	vadd.i64	q8, q7, q4
-+	vadd.i64	q2, q2, q6
-+	vshl.i64	q6, q6, #26
-+	vadd.i64	q10, q2, q4
-+	vsub.i64	q5, q12, q5
-+	vshr.s64	q8, q8, #25
-+	vsub.i64	q6, q15, q6
-+	vshr.s64	q10, q10, #25
-+	vadd.i64	q12, q13, q8
-+	vshl.i64	q8, q8, #25
-+	vadd.i64	q13, q12, q9
-+	vadd.i64	q0, q0, q10
-+	vsub.i64	q7, q7, q8
-+	vshr.s64	q8, q13, #26
-+	vshl.i64	q10, q10, #25
-+	vadd.i64	q13, q0, q9
-+	vadd.i64	q1, q1, q8
-+	vshl.i64	q8, q8, #26
-+	vadd.i64	q15, q1, q4
-+	vsub.i64	q2, q2, q10
-+	vshr.s64	q10, q13, #26
-+	vsub.i64	q8, q12, q8
-+	vshr.s64	q12, q15, #25
-+	vadd.i64	q3, q3, q10
-+	vshl.i64	q10, q10, #26
-+	vadd.i64	q13, q3, q4
-+	vadd.i64	q14, q14, q12
-+	add		r2, r3, #288
-+	vshl.i64	q12, q12, #25
-+	add		r4, r3, #336
-+	vadd.i64	q15, q14, q9
-+	add		r2, r2, #8
-+	vsub.i64	q0, q0, q10
-+	add		r4, r4, #8
-+	vshr.s64	q10, q13, #25
-+	vsub.i64	q1, q1, q12
-+	vshr.s64	q12, q15, #26
-+	vadd.i64	q13, q10, q10
-+	vadd.i64	q11, q11, q12
-+	vtrn.32		d16, d2
-+	vshl.i64	q12, q12, #26
-+	vtrn.32		d17, d3
-+	vadd.i64	q1, q11, q4
-+	vadd.i64	q4, q5, q13
-+	vst1.8		d16, [r2, : 64]!
-+	vshl.i64	q5, q10, #4
-+	vst1.8		d17, [r4, : 64]!
-+	vsub.i64	q8, q14, q12
-+	vshr.s64	q1, q1, #25
-+	vadd.i64	q4, q4, q5
-+	vadd.i64	q5, q6, q1
-+	vshl.i64	q1, q1, #25
-+	vadd.i64	q6, q5, q9
-+	vadd.i64	q4, q4, q10
-+	vshl.i64	q10, q10, #25
-+	vadd.i64	q9, q4, q9
-+	vsub.i64	q1, q11, q1
-+	vshr.s64	q6, q6, #26
-+	vsub.i64	q3, q3, q10
-+	vtrn.32		d16, d2
-+	vshr.s64	q9, q9, #26
-+	vtrn.32		d17, d3
-+	vadd.i64	q1, q2, q6
-+	vst1.8		d16, [r2, : 64]
-+	vshl.i64	q2, q6, #26
-+	vst1.8		d17, [r4, : 64]
-+	vadd.i64	q6, q7, q9
-+	vtrn.32		d0, d6
-+	vshl.i64	q7, q9, #26
-+	vtrn.32		d1, d7
-+	vsub.i64	q2, q5, q2
-+	add		r2, r2, #16
-+	vsub.i64	q3, q4, q7
-+	vst1.8		d0, [r2, : 64]
-+	add		r4, r4, #16
-+	vst1.8		d1, [r4, : 64]
-+	vtrn.32		d4, d2
-+	vtrn.32		d5, d3
-+	sub		r2, r2, #8
-+	sub		r4, r4, #8
-+	vtrn.32		d6, d12
-+	vtrn.32		d7, d13
-+	vst1.8		d4, [r2, : 64]
-+	vst1.8		d5, [r4, : 64]
-+	sub		r2, r2, #24
-+	sub		r4, r4, #24
-+	vst1.8		d6, [r2, : 64]
-+	vst1.8		d7, [r4, : 64]
-+	add		r2, r3, #240
-+	add		r4, r3, #96
-+	vld1.8		{d0-d1}, [r4, : 128]!
-+	vld1.8		{d2-d3}, [r4, : 128]!
-+	vld1.8		{d4}, [r4, : 64]
-+	add		r4, r3, #144
-+	vld1.8		{d6-d7}, [r4, : 128]!
-+	vtrn.32		q0, q3
-+	vld1.8		{d8-d9}, [r4, : 128]!
-+	vshl.i32	q5, q0, #4
-+	vtrn.32		q1, q4
-+	vshl.i32	q6, q3, #4
-+	vadd.i32	q5, q5, q0
-+	vadd.i32	q6, q6, q3
-+	vshl.i32	q7, q1, #4
-+	vld1.8		{d5}, [r4, : 64]
-+	vshl.i32	q8, q4, #4
-+	vtrn.32		d4, d5
-+	vadd.i32	q7, q7, q1
-+	vadd.i32	q8, q8, q4
-+	vld1.8		{d18-d19}, [r2, : 128]!
-+	vshl.i32	q10, q2, #4
-+	vld1.8		{d22-d23}, [r2, : 128]!
-+	vadd.i32	q10, q10, q2
-+	vld1.8		{d24}, [r2, : 64]
-+	vadd.i32	q5, q5, q0
-+	add		r2, r3, #192
-+	vld1.8		{d26-d27}, [r2, : 128]!
-+	vadd.i32	q6, q6, q3
-+	vld1.8		{d28-d29}, [r2, : 128]!
-+	vadd.i32	q8, q8, q4
-+	vld1.8		{d25}, [r2, : 64]
-+	vadd.i32	q10, q10, q2
-+	vtrn.32		q9, q13
-+	vadd.i32	q7, q7, q1
-+	vadd.i32	q5, q5, q0
-+	vtrn.32		q11, q14
-+	vadd.i32	q6, q6, q3
-+	add		r2, sp, #560
-+	vadd.i32	q10, q10, q2
-+	vtrn.32		d24, d25
-+	vst1.8		{d12-d13}, [r2, : 128]
-+	vshl.i32	q6, q13, #1
-+	add		r2, sp, #576
-+	vst1.8		{d20-d21}, [r2, : 128]
-+	vshl.i32	q10, q14, #1
-+	add		r2, sp, #592
-+	vst1.8		{d12-d13}, [r2, : 128]
-+	vshl.i32	q15, q12, #1
-+	vadd.i32	q8, q8, q4
-+	vext.32		d10, d31, d30, #0
-+	vadd.i32	q7, q7, q1
-+	add		r2, sp, #608
-+	vst1.8		{d16-d17}, [r2, : 128]
-+	vmull.s32	q8, d18, d5
-+	vmlal.s32	q8, d26, d4
-+	vmlal.s32	q8, d19, d9
-+	vmlal.s32	q8, d27, d3
-+	vmlal.s32	q8, d22, d8
-+	vmlal.s32	q8, d28, d2
-+	vmlal.s32	q8, d23, d7
-+	vmlal.s32	q8, d29, d1
-+	vmlal.s32	q8, d24, d6
-+	vmlal.s32	q8, d25, d0
-+	add		r2, sp, #624
-+	vst1.8		{d14-d15}, [r2, : 128]
-+	vmull.s32	q2, d18, d4
-+	vmlal.s32	q2, d12, d9
-+	vmlal.s32	q2, d13, d8
-+	vmlal.s32	q2, d19, d3
-+	vmlal.s32	q2, d22, d2
-+	vmlal.s32	q2, d23, d1
-+	vmlal.s32	q2, d24, d0
-+	add		r2, sp, #640
-+	vst1.8		{d20-d21}, [r2, : 128]
-+	vmull.s32	q7, d18, d9
-+	vmlal.s32	q7, d26, d3
-+	vmlal.s32	q7, d19, d8
-+	vmlal.s32	q7, d27, d2
-+	vmlal.s32	q7, d22, d7
-+	vmlal.s32	q7, d28, d1
-+	vmlal.s32	q7, d23, d6
-+	vmlal.s32	q7, d29, d0
-+	add		r2, sp, #656
-+	vst1.8		{d10-d11}, [r2, : 128]
-+	vmull.s32	q5, d18, d3
-+	vmlal.s32	q5, d19, d2
-+	vmlal.s32	q5, d22, d1
-+	vmlal.s32	q5, d23, d0
-+	vmlal.s32	q5, d12, d8
-+	add		r2, sp, #672
-+	vst1.8		{d16-d17}, [r2, : 128]
-+	vmull.s32	q4, d18, d8
-+	vmlal.s32	q4, d26, d2
-+	vmlal.s32	q4, d19, d7
-+	vmlal.s32	q4, d27, d1
-+	vmlal.s32	q4, d22, d6
-+	vmlal.s32	q4, d28, d0
-+	vmull.s32	q8, d18, d7
-+	vmlal.s32	q8, d26, d1
-+	vmlal.s32	q8, d19, d6
-+	vmlal.s32	q8, d27, d0
-+	add		r2, sp, #576
-+	vld1.8		{d20-d21}, [r2, : 128]
-+	vmlal.s32	q7, d24, d21
-+	vmlal.s32	q7, d25, d20
-+	vmlal.s32	q4, d23, d21
-+	vmlal.s32	q4, d29, d20
-+	vmlal.s32	q8, d22, d21
-+	vmlal.s32	q8, d28, d20
-+	vmlal.s32	q5, d24, d20
-+	add		r2, sp, #576
-+	vst1.8		{d14-d15}, [r2, : 128]
-+	vmull.s32	q7, d18, d6
-+	vmlal.s32	q7, d26, d0
-+	add		r2, sp, #656
-+	vld1.8		{d30-d31}, [r2, : 128]
-+	vmlal.s32	q2, d30, d21
-+	vmlal.s32	q7, d19, d21
-+	vmlal.s32	q7, d27, d20
-+	add		r2, sp, #624
-+	vld1.8		{d26-d27}, [r2, : 128]
-+	vmlal.s32	q4, d25, d27
-+	vmlal.s32	q8, d29, d27
-+	vmlal.s32	q8, d25, d26
-+	vmlal.s32	q7, d28, d27
-+	vmlal.s32	q7, d29, d26
-+	add		r2, sp, #608
-+	vld1.8		{d28-d29}, [r2, : 128]
-+	vmlal.s32	q4, d24, d29
-+	vmlal.s32	q8, d23, d29
-+	vmlal.s32	q8, d24, d28
-+	vmlal.s32	q7, d22, d29
-+	vmlal.s32	q7, d23, d28
-+	add		r2, sp, #608
-+	vst1.8		{d8-d9}, [r2, : 128]
-+	add		r2, sp, #560
-+	vld1.8		{d8-d9}, [r2, : 128]
-+	vmlal.s32	q7, d24, d9
-+	vmlal.s32	q7, d25, d31
-+	vmull.s32	q1, d18, d2
-+	vmlal.s32	q1, d19, d1
-+	vmlal.s32	q1, d22, d0
-+	vmlal.s32	q1, d24, d27
-+	vmlal.s32	q1, d23, d20
-+	vmlal.s32	q1, d12, d7
-+	vmlal.s32	q1, d13, d6
-+	vmull.s32	q6, d18, d1
-+	vmlal.s32	q6, d19, d0
-+	vmlal.s32	q6, d23, d27
-+	vmlal.s32	q6, d22, d20
-+	vmlal.s32	q6, d24, d26
-+	vmull.s32	q0, d18, d0
-+	vmlal.s32	q0, d22, d27
-+	vmlal.s32	q0, d23, d26
-+	vmlal.s32	q0, d24, d31
-+	vmlal.s32	q0, d19, d20
-+	add		r2, sp, #640
-+	vld1.8		{d18-d19}, [r2, : 128]
-+	vmlal.s32	q2, d18, d7
-+	vmlal.s32	q2, d19, d6
-+	vmlal.s32	q5, d18, d6
-+	vmlal.s32	q5, d19, d21
-+	vmlal.s32	q1, d18, d21
-+	vmlal.s32	q1, d19, d29
-+	vmlal.s32	q0, d18, d28
-+	vmlal.s32	q0, d19, d9
-+	vmlal.s32	q6, d18, d29
-+	vmlal.s32	q6, d19, d28
-+	add		r2, sp, #592
-+	vld1.8		{d18-d19}, [r2, : 128]
-+	add		r2, sp, #512
-+	vld1.8		{d22-d23}, [r2, : 128]
-+	vmlal.s32	q5, d19, d7
-+	vmlal.s32	q0, d18, d21
-+	vmlal.s32	q0, d19, d29
-+	vmlal.s32	q6, d18, d6
-+	add		r2, sp, #528
-+	vld1.8		{d6-d7}, [r2, : 128]
-+	vmlal.s32	q6, d19, d21
-+	add		r2, sp, #576
-+	vld1.8		{d18-d19}, [r2, : 128]
-+	vmlal.s32	q0, d30, d8
-+	add		r2, sp, #672
-+	vld1.8		{d20-d21}, [r2, : 128]
-+	vmlal.s32	q5, d30, d29
-+	add		r2, sp, #608
-+	vld1.8		{d24-d25}, [r2, : 128]
-+	vmlal.s32	q1, d30, d28
-+	vadd.i64	q13, q0, q11
-+	vadd.i64	q14, q5, q11
-+	vmlal.s32	q6, d30, d9
-+	vshr.s64	q4, q13, #26
-+	vshr.s64	q13, q14, #26
-+	vadd.i64	q7, q7, q4
-+	vshl.i64	q4, q4, #26
-+	vadd.i64	q14, q7, q3
-+	vadd.i64	q9, q9, q13
-+	vshl.i64	q13, q13, #26
-+	vadd.i64	q15, q9, q3
-+	vsub.i64	q0, q0, q4
-+	vshr.s64	q4, q14, #25
-+	vsub.i64	q5, q5, q13
-+	vshr.s64	q13, q15, #25
-+	vadd.i64	q6, q6, q4
-+	vshl.i64	q4, q4, #25
-+	vadd.i64	q14, q6, q11
-+	vadd.i64	q2, q2, q13
-+	vsub.i64	q4, q7, q4
-+	vshr.s64	q7, q14, #26
-+	vshl.i64	q13, q13, #25
-+	vadd.i64	q14, q2, q11
-+	vadd.i64	q8, q8, q7
-+	vshl.i64	q7, q7, #26
-+	vadd.i64	q15, q8, q3
-+	vsub.i64	q9, q9, q13
-+	vshr.s64	q13, q14, #26
-+	vsub.i64	q6, q6, q7
-+	vshr.s64	q7, q15, #25
-+	vadd.i64	q10, q10, q13
-+	vshl.i64	q13, q13, #26
-+	vadd.i64	q14, q10, q3
-+	vadd.i64	q1, q1, q7
-+	add		r2, r3, #144
-+	vshl.i64	q7, q7, #25
-+	add		r4, r3, #96
-+	vadd.i64	q15, q1, q11
-+	add		r2, r2, #8
-+	vsub.i64	q2, q2, q13
-+	add		r4, r4, #8
-+	vshr.s64	q13, q14, #25
-+	vsub.i64	q7, q8, q7
-+	vshr.s64	q8, q15, #26
-+	vadd.i64	q14, q13, q13
-+	vadd.i64	q12, q12, q8
-+	vtrn.32		d12, d14
-+	vshl.i64	q8, q8, #26
-+	vtrn.32		d13, d15
-+	vadd.i64	q3, q12, q3
-+	vadd.i64	q0, q0, q14
-+	vst1.8		d12, [r2, : 64]!
-+	vshl.i64	q7, q13, #4
-+	vst1.8		d13, [r4, : 64]!
-+	vsub.i64	q1, q1, q8
-+	vshr.s64	q3, q3, #25
-+	vadd.i64	q0, q0, q7
-+	vadd.i64	q5, q5, q3
-+	vshl.i64	q3, q3, #25
-+	vadd.i64	q6, q5, q11
-+	vadd.i64	q0, q0, q13
-+	vshl.i64	q7, q13, #25
-+	vadd.i64	q8, q0, q11
-+	vsub.i64	q3, q12, q3
-+	vshr.s64	q6, q6, #26
-+	vsub.i64	q7, q10, q7
-+	vtrn.32		d2, d6
-+	vshr.s64	q8, q8, #26
-+	vtrn.32		d3, d7
-+	vadd.i64	q3, q9, q6
-+	vst1.8		d2, [r2, : 64]
-+	vshl.i64	q6, q6, #26
-+	vst1.8		d3, [r4, : 64]
-+	vadd.i64	q1, q4, q8
-+	vtrn.32		d4, d14
-+	vshl.i64	q4, q8, #26
-+	vtrn.32		d5, d15
-+	vsub.i64	q5, q5, q6
-+	add		r2, r2, #16
-+	vsub.i64	q0, q0, q4
-+	vst1.8		d4, [r2, : 64]
-+	add		r4, r4, #16
-+	vst1.8		d5, [r4, : 64]
-+	vtrn.32		d10, d6
-+	vtrn.32		d11, d7
-+	sub		r2, r2, #8
-+	sub		r4, r4, #8
-+	vtrn.32		d0, d2
-+	vtrn.32		d1, d3
-+	vst1.8		d10, [r2, : 64]
-+	vst1.8		d11, [r4, : 64]
-+	sub		r2, r2, #24
-+	sub		r4, r4, #24
-+	vst1.8		d0, [r2, : 64]
-+	vst1.8		d1, [r4, : 64]
-+	add		r2, r3, #288
-+	add		r4, r3, #336
-+	vld1.8		{d0-d1}, [r2, : 128]!
-+	vld1.8		{d2-d3}, [r4, : 128]!
-+	vsub.i32	q0, q0, q1
-+	vld1.8		{d2-d3}, [r2, : 128]!
-+	vld1.8		{d4-d5}, [r4, : 128]!
-+	vsub.i32	q1, q1, q2
-+	add		r5, r3, #240
-+	vld1.8		{d4}, [r2, : 64]
-+	vld1.8		{d6}, [r4, : 64]
-+	vsub.i32	q2, q2, q3
-+	vst1.8		{d0-d1}, [r5, : 128]!
-+	vst1.8		{d2-d3}, [r5, : 128]!
-+	vst1.8		d4, [r5, : 64]
-+	add		r2, r3, #144
-+	add		r4, r3, #96
-+	add		r5, r3, #144
-+	add		r6, r3, #192
-+	vld1.8		{d0-d1}, [r2, : 128]!
-+	vld1.8		{d2-d3}, [r4, : 128]!
-+	vsub.i32	q2, q0, q1
-+	vadd.i32	q0, q0, q1
-+	vld1.8		{d2-d3}, [r2, : 128]!
-+	vld1.8		{d6-d7}, [r4, : 128]!
-+	vsub.i32	q4, q1, q3
-+	vadd.i32	q1, q1, q3
-+	vld1.8		{d6}, [r2, : 64]
-+	vld1.8		{d10}, [r4, : 64]
-+	vsub.i32	q6, q3, q5
-+	vadd.i32	q3, q3, q5
-+	vst1.8		{d4-d5}, [r5, : 128]!
-+	vst1.8		{d0-d1}, [r6, : 128]!
-+	vst1.8		{d8-d9}, [r5, : 128]!
-+	vst1.8		{d2-d3}, [r6, : 128]!
-+	vst1.8		d12, [r5, : 64]
-+	vst1.8		d6, [r6, : 64]
-+	add		r2, r3, #0
-+	add		r4, r3, #240
-+	vld1.8		{d0-d1}, [r4, : 128]!
-+	vld1.8		{d2-d3}, [r4, : 128]!
-+	vld1.8		{d4}, [r4, : 64]
-+	add		r4, r3, #336
-+	vld1.8		{d6-d7}, [r4, : 128]!
-+	vtrn.32		q0, q3
-+	vld1.8		{d8-d9}, [r4, : 128]!
-+	vshl.i32	q5, q0, #4
-+	vtrn.32		q1, q4
-+	vshl.i32	q6, q3, #4
-+	vadd.i32	q5, q5, q0
-+	vadd.i32	q6, q6, q3
-+	vshl.i32	q7, q1, #4
-+	vld1.8		{d5}, [r4, : 64]
-+	vshl.i32	q8, q4, #4
-+	vtrn.32		d4, d5
-+	vadd.i32	q7, q7, q1
-+	vadd.i32	q8, q8, q4
-+	vld1.8		{d18-d19}, [r2, : 128]!
-+	vshl.i32	q10, q2, #4
-+	vld1.8		{d22-d23}, [r2, : 128]!
-+	vadd.i32	q10, q10, q2
-+	vld1.8		{d24}, [r2, : 64]
-+	vadd.i32	q5, q5, q0
-+	add		r2, r3, #288
-+	vld1.8		{d26-d27}, [r2, : 128]!
-+	vadd.i32	q6, q6, q3
-+	vld1.8		{d28-d29}, [r2, : 128]!
-+	vadd.i32	q8, q8, q4
-+	vld1.8		{d25}, [r2, : 64]
-+	vadd.i32	q10, q10, q2
-+	vtrn.32		q9, q13
-+	vadd.i32	q7, q7, q1
-+	vadd.i32	q5, q5, q0
-+	vtrn.32		q11, q14
-+	vadd.i32	q6, q6, q3
-+	add		r2, sp, #560
-+	vadd.i32	q10, q10, q2
-+	vtrn.32		d24, d25
-+	vst1.8		{d12-d13}, [r2, : 128]
-+	vshl.i32	q6, q13, #1
-+	add		r2, sp, #576
-+	vst1.8		{d20-d21}, [r2, : 128]
-+	vshl.i32	q10, q14, #1
-+	add		r2, sp, #592
-+	vst1.8		{d12-d13}, [r2, : 128]
-+	vshl.i32	q15, q12, #1
-+	vadd.i32	q8, q8, q4
-+	vext.32		d10, d31, d30, #0
-+	vadd.i32	q7, q7, q1
-+	add		r2, sp, #608
-+	vst1.8		{d16-d17}, [r2, : 128]
-+	vmull.s32	q8, d18, d5
-+	vmlal.s32	q8, d26, d4
-+	vmlal.s32	q8, d19, d9
-+	vmlal.s32	q8, d27, d3
-+	vmlal.s32	q8, d22, d8
-+	vmlal.s32	q8, d28, d2
-+	vmlal.s32	q8, d23, d7
-+	vmlal.s32	q8, d29, d1
-+	vmlal.s32	q8, d24, d6
-+	vmlal.s32	q8, d25, d0
-+	add		r2, sp, #624
-+	vst1.8		{d14-d15}, [r2, : 128]
-+	vmull.s32	q2, d18, d4
-+	vmlal.s32	q2, d12, d9
-+	vmlal.s32	q2, d13, d8
-+	vmlal.s32	q2, d19, d3
-+	vmlal.s32	q2, d22, d2
-+	vmlal.s32	q2, d23, d1
-+	vmlal.s32	q2, d24, d0
-+	add		r2, sp, #640
-+	vst1.8		{d20-d21}, [r2, : 128]
-+	vmull.s32	q7, d18, d9
-+	vmlal.s32	q7, d26, d3
-+	vmlal.s32	q7, d19, d8
-+	vmlal.s32	q7, d27, d2
-+	vmlal.s32	q7, d22, d7
-+	vmlal.s32	q7, d28, d1
-+	vmlal.s32	q7, d23, d6
-+	vmlal.s32	q7, d29, d0
-+	add		r2, sp, #656
-+	vst1.8		{d10-d11}, [r2, : 128]
-+	vmull.s32	q5, d18, d3
-+	vmlal.s32	q5, d19, d2
-+	vmlal.s32	q5, d22, d1
-+	vmlal.s32	q5, d23, d0
-+	vmlal.s32	q5, d12, d8
-+	add		r2, sp, #672
-+	vst1.8		{d16-d17}, [r2, : 128]
-+	vmull.s32	q4, d18, d8
-+	vmlal.s32	q4, d26, d2
-+	vmlal.s32	q4, d19, d7
-+	vmlal.s32	q4, d27, d1
-+	vmlal.s32	q4, d22, d6
-+	vmlal.s32	q4, d28, d0
-+	vmull.s32	q8, d18, d7
-+	vmlal.s32	q8, d26, d1
-+	vmlal.s32	q8, d19, d6
-+	vmlal.s32	q8, d27, d0
-+	add		r2, sp, #576
-+	vld1.8		{d20-d21}, [r2, : 128]
-+	vmlal.s32	q7, d24, d21
-+	vmlal.s32	q7, d25, d20
-+	vmlal.s32	q4, d23, d21
-+	vmlal.s32	q4, d29, d20
-+	vmlal.s32	q8, d22, d21
-+	vmlal.s32	q8, d28, d20
-+	vmlal.s32	q5, d24, d20
-+	add		r2, sp, #576
-+	vst1.8		{d14-d15}, [r2, : 128]
-+	vmull.s32	q7, d18, d6
-+	vmlal.s32	q7, d26, d0
-+	add		r2, sp, #656
-+	vld1.8		{d30-d31}, [r2, : 128]
-+	vmlal.s32	q2, d30, d21
-+	vmlal.s32	q7, d19, d21
-+	vmlal.s32	q7, d27, d20
-+	add		r2, sp, #624
-+	vld1.8		{d26-d27}, [r2, : 128]
-+	vmlal.s32	q4, d25, d27
-+	vmlal.s32	q8, d29, d27
-+	vmlal.s32	q8, d25, d26
-+	vmlal.s32	q7, d28, d27
-+	vmlal.s32	q7, d29, d26
-+	add		r2, sp, #608
-+	vld1.8		{d28-d29}, [r2, : 128]
-+	vmlal.s32	q4, d24, d29
-+	vmlal.s32	q8, d23, d29
-+	vmlal.s32	q8, d24, d28
-+	vmlal.s32	q7, d22, d29
-+	vmlal.s32	q7, d23, d28
-+	add		r2, sp, #608
-+	vst1.8		{d8-d9}, [r2, : 128]
-+	add		r2, sp, #560
-+	vld1.8		{d8-d9}, [r2, : 128]
-+	vmlal.s32	q7, d24, d9
-+	vmlal.s32	q7, d25, d31
-+	vmull.s32	q1, d18, d2
-+	vmlal.s32	q1, d19, d1
-+	vmlal.s32	q1, d22, d0
-+	vmlal.s32	q1, d24, d27
-+	vmlal.s32	q1, d23, d20
-+	vmlal.s32	q1, d12, d7
-+	vmlal.s32	q1, d13, d6
-+	vmull.s32	q6, d18, d1
-+	vmlal.s32	q6, d19, d0
-+	vmlal.s32	q6, d23, d27
-+	vmlal.s32	q6, d22, d20
-+	vmlal.s32	q6, d24, d26
-+	vmull.s32	q0, d18, d0
-+	vmlal.s32	q0, d22, d27
-+	vmlal.s32	q0, d23, d26
-+	vmlal.s32	q0, d24, d31
-+	vmlal.s32	q0, d19, d20
-+	add		r2, sp, #640
-+	vld1.8		{d18-d19}, [r2, : 128]
-+	vmlal.s32	q2, d18, d7
-+	vmlal.s32	q2, d19, d6
-+	vmlal.s32	q5, d18, d6
-+	vmlal.s32	q5, d19, d21
-+	vmlal.s32	q1, d18, d21
-+	vmlal.s32	q1, d19, d29
-+	vmlal.s32	q0, d18, d28
-+	vmlal.s32	q0, d19, d9
-+	vmlal.s32	q6, d18, d29
-+	vmlal.s32	q6, d19, d28
-+	add		r2, sp, #592
-+	vld1.8		{d18-d19}, [r2, : 128]
-+	add		r2, sp, #512
-+	vld1.8		{d22-d23}, [r2, : 128]
-+	vmlal.s32	q5, d19, d7
-+	vmlal.s32	q0, d18, d21
-+	vmlal.s32	q0, d19, d29
-+	vmlal.s32	q6, d18, d6
-+	add		r2, sp, #528
-+	vld1.8		{d6-d7}, [r2, : 128]
-+	vmlal.s32	q6, d19, d21
-+	add		r2, sp, #576
-+	vld1.8		{d18-d19}, [r2, : 128]
-+	vmlal.s32	q0, d30, d8
-+	add		r2, sp, #672
-+	vld1.8		{d20-d21}, [r2, : 128]
-+	vmlal.s32	q5, d30, d29
-+	add		r2, sp, #608
-+	vld1.8		{d24-d25}, [r2, : 128]
-+	vmlal.s32	q1, d30, d28
-+	vadd.i64	q13, q0, q11
-+	vadd.i64	q14, q5, q11
-+	vmlal.s32	q6, d30, d9
-+	vshr.s64	q4, q13, #26
-+	vshr.s64	q13, q14, #26
-+	vadd.i64	q7, q7, q4
-+	vshl.i64	q4, q4, #26
-+	vadd.i64	q14, q7, q3
-+	vadd.i64	q9, q9, q13
-+	vshl.i64	q13, q13, #26
-+	vadd.i64	q15, q9, q3
-+	vsub.i64	q0, q0, q4
-+	vshr.s64	q4, q14, #25
-+	vsub.i64	q5, q5, q13
-+	vshr.s64	q13, q15, #25
-+	vadd.i64	q6, q6, q4
-+	vshl.i64	q4, q4, #25
-+	vadd.i64	q14, q6, q11
-+	vadd.i64	q2, q2, q13
-+	vsub.i64	q4, q7, q4
-+	vshr.s64	q7, q14, #26
-+	vshl.i64	q13, q13, #25
-+	vadd.i64	q14, q2, q11
-+	vadd.i64	q8, q8, q7
-+	vshl.i64	q7, q7, #26
-+	vadd.i64	q15, q8, q3
-+	vsub.i64	q9, q9, q13
-+	vshr.s64	q13, q14, #26
-+	vsub.i64	q6, q6, q7
-+	vshr.s64	q7, q15, #25
-+	vadd.i64	q10, q10, q13
-+	vshl.i64	q13, q13, #26
-+	vadd.i64	q14, q10, q3
-+	vadd.i64	q1, q1, q7
-+	add		r2, r3, #288
-+	vshl.i64	q7, q7, #25
-+	add		r4, r3, #96
-+	vadd.i64	q15, q1, q11
-+	add		r2, r2, #8
-+	vsub.i64	q2, q2, q13
-+	add		r4, r4, #8
-+	vshr.s64	q13, q14, #25
-+	vsub.i64	q7, q8, q7
-+	vshr.s64	q8, q15, #26
-+	vadd.i64	q14, q13, q13
-+	vadd.i64	q12, q12, q8
-+	vtrn.32		d12, d14
-+	vshl.i64	q8, q8, #26
-+	vtrn.32		d13, d15
-+	vadd.i64	q3, q12, q3
-+	vadd.i64	q0, q0, q14
-+	vst1.8		d12, [r2, : 64]!
-+	vshl.i64	q7, q13, #4
-+	vst1.8		d13, [r4, : 64]!
-+	vsub.i64	q1, q1, q8
-+	vshr.s64	q3, q3, #25
-+	vadd.i64	q0, q0, q7
-+	vadd.i64	q5, q5, q3
-+	vshl.i64	q3, q3, #25
-+	vadd.i64	q6, q5, q11
-+	vadd.i64	q0, q0, q13
-+	vshl.i64	q7, q13, #25
-+	vadd.i64	q8, q0, q11
-+	vsub.i64	q3, q12, q3
-+	vshr.s64	q6, q6, #26
-+	vsub.i64	q7, q10, q7
-+	vtrn.32		d2, d6
-+	vshr.s64	q8, q8, #26
-+	vtrn.32		d3, d7
-+	vadd.i64	q3, q9, q6
-+	vst1.8		d2, [r2, : 64]
-+	vshl.i64	q6, q6, #26
-+	vst1.8		d3, [r4, : 64]
-+	vadd.i64	q1, q4, q8
-+	vtrn.32		d4, d14
-+	vshl.i64	q4, q8, #26
-+	vtrn.32		d5, d15
-+	vsub.i64	q5, q5, q6
-+	add		r2, r2, #16
-+	vsub.i64	q0, q0, q4
-+	vst1.8		d4, [r2, : 64]
-+	add		r4, r4, #16
-+	vst1.8		d5, [r4, : 64]
-+	vtrn.32		d10, d6
-+	vtrn.32		d11, d7
-+	sub		r2, r2, #8
-+	sub		r4, r4, #8
-+	vtrn.32		d0, d2
-+	vtrn.32		d1, d3
-+	vst1.8		d10, [r2, : 64]
-+	vst1.8		d11, [r4, : 64]
-+	sub		r2, r2, #24
-+	sub		r4, r4, #24
-+	vst1.8		d0, [r2, : 64]
-+	vst1.8		d1, [r4, : 64]
-+	add		r2, sp, #544
-+	add		r4, r3, #144
-+	add		r5, r3, #192
-+	vld1.8		{d0-d1}, [r2, : 128]
-+	vld1.8		{d2-d3}, [r4, : 128]!
-+	vld1.8		{d4-d5}, [r5, : 128]!
-+	vzip.i32	q1, q2
-+	vld1.8		{d6-d7}, [r4, : 128]!
-+	vld1.8		{d8-d9}, [r5, : 128]!
-+	vshl.i32	q5, q1, #1
-+	vzip.i32	q3, q4
-+	vshl.i32	q6, q2, #1
-+	vld1.8		{d14}, [r4, : 64]
-+	vshl.i32	q8, q3, #1
-+	vld1.8		{d15}, [r5, : 64]
-+	vshl.i32	q9, q4, #1
-+	vmul.i32	d21, d7, d1
-+	vtrn.32		d14, d15
-+	vmul.i32	q11, q4, q0
-+	vmul.i32	q0, q7, q0
-+	vmull.s32	q12, d2, d2
-+	vmlal.s32	q12, d11, d1
-+	vmlal.s32	q12, d12, d0
-+	vmlal.s32	q12, d13, d23
-+	vmlal.s32	q12, d16, d22
-+	vmlal.s32	q12, d7, d21
-+	vmull.s32	q10, d2, d11
-+	vmlal.s32	q10, d4, d1
-+	vmlal.s32	q10, d13, d0
-+	vmlal.s32	q10, d6, d23
-+	vmlal.s32	q10, d17, d22
-+	vmull.s32	q13, d10, d4
-+	vmlal.s32	q13, d11, d3
-+	vmlal.s32	q13, d13, d1
-+	vmlal.s32	q13, d16, d0
-+	vmlal.s32	q13, d17, d23
-+	vmlal.s32	q13, d8, d22
-+	vmull.s32	q1, d10, d5
-+	vmlal.s32	q1, d11, d4
-+	vmlal.s32	q1, d6, d1
-+	vmlal.s32	q1, d17, d0
-+	vmlal.s32	q1, d8, d23
-+	vmull.s32	q14, d10, d6
-+	vmlal.s32	q14, d11, d13
-+	vmlal.s32	q14, d4, d4
-+	vmlal.s32	q14, d17, d1
-+	vmlal.s32	q14, d18, d0
-+	vmlal.s32	q14, d9, d23
-+	vmull.s32	q11, d10, d7
-+	vmlal.s32	q11, d11, d6
-+	vmlal.s32	q11, d12, d5
-+	vmlal.s32	q11, d8, d1
-+	vmlal.s32	q11, d19, d0
-+	vmull.s32	q15, d10, d8
-+	vmlal.s32	q15, d11, d17
-+	vmlal.s32	q15, d12, d6
-+	vmlal.s32	q15, d13, d5
-+	vmlal.s32	q15, d19, d1
-+	vmlal.s32	q15, d14, d0
-+	vmull.s32	q2, d10, d9
-+	vmlal.s32	q2, d11, d8
-+	vmlal.s32	q2, d12, d7
-+	vmlal.s32	q2, d13, d6
-+	vmlal.s32	q2, d14, d1
-+	vmull.s32	q0, d15, d1
-+	vmlal.s32	q0, d10, d14
-+	vmlal.s32	q0, d11, d19
-+	vmlal.s32	q0, d12, d8
-+	vmlal.s32	q0, d13, d17
-+	vmlal.s32	q0, d6, d6
-+	add		r2, sp, #512
-+	vld1.8		{d18-d19}, [r2, : 128]
-+	vmull.s32	q3, d16, d7
-+	vmlal.s32	q3, d10, d15
-+	vmlal.s32	q3, d11, d14
-+	vmlal.s32	q3, d12, d9
-+	vmlal.s32	q3, d13, d8
-+	add		r2, sp, #528
-+	vld1.8		{d8-d9}, [r2, : 128]
-+	vadd.i64	q5, q12, q9
-+	vadd.i64	q6, q15, q9
-+	vshr.s64	q5, q5, #26
-+	vshr.s64	q6, q6, #26
-+	vadd.i64	q7, q10, q5
-+	vshl.i64	q5, q5, #26
-+	vadd.i64	q8, q7, q4
-+	vadd.i64	q2, q2, q6
-+	vshl.i64	q6, q6, #26
-+	vadd.i64	q10, q2, q4
-+	vsub.i64	q5, q12, q5
-+	vshr.s64	q8, q8, #25
-+	vsub.i64	q6, q15, q6
-+	vshr.s64	q10, q10, #25
-+	vadd.i64	q12, q13, q8
-+	vshl.i64	q8, q8, #25
-+	vadd.i64	q13, q12, q9
-+	vadd.i64	q0, q0, q10
-+	vsub.i64	q7, q7, q8
-+	vshr.s64	q8, q13, #26
-+	vshl.i64	q10, q10, #25
-+	vadd.i64	q13, q0, q9
-+	vadd.i64	q1, q1, q8
-+	vshl.i64	q8, q8, #26
-+	vadd.i64	q15, q1, q4
-+	vsub.i64	q2, q2, q10
-+	vshr.s64	q10, q13, #26
-+	vsub.i64	q8, q12, q8
-+	vshr.s64	q12, q15, #25
-+	vadd.i64	q3, q3, q10
-+	vshl.i64	q10, q10, #26
-+	vadd.i64	q13, q3, q4
-+	vadd.i64	q14, q14, q12
-+	add		r2, r3, #144
-+	vshl.i64	q12, q12, #25
-+	add		r4, r3, #192
-+	vadd.i64	q15, q14, q9
-+	add		r2, r2, #8
-+	vsub.i64	q0, q0, q10
-+	add		r4, r4, #8
-+	vshr.s64	q10, q13, #25
-+	vsub.i64	q1, q1, q12
-+	vshr.s64	q12, q15, #26
-+	vadd.i64	q13, q10, q10
-+	vadd.i64	q11, q11, q12
-+	vtrn.32		d16, d2
-+	vshl.i64	q12, q12, #26
-+	vtrn.32		d17, d3
-+	vadd.i64	q1, q11, q4
-+	vadd.i64	q4, q5, q13
-+	vst1.8		d16, [r2, : 64]!
-+	vshl.i64	q5, q10, #4
-+	vst1.8		d17, [r4, : 64]!
-+	vsub.i64	q8, q14, q12
-+	vshr.s64	q1, q1, #25
-+	vadd.i64	q4, q4, q5
-+	vadd.i64	q5, q6, q1
-+	vshl.i64	q1, q1, #25
-+	vadd.i64	q6, q5, q9
-+	vadd.i64	q4, q4, q10
-+	vshl.i64	q10, q10, #25
-+	vadd.i64	q9, q4, q9
-+	vsub.i64	q1, q11, q1
-+	vshr.s64	q6, q6, #26
-+	vsub.i64	q3, q3, q10
-+	vtrn.32		d16, d2
-+	vshr.s64	q9, q9, #26
-+	vtrn.32		d17, d3
-+	vadd.i64	q1, q2, q6
-+	vst1.8		d16, [r2, : 64]
-+	vshl.i64	q2, q6, #26
-+	vst1.8		d17, [r4, : 64]
-+	vadd.i64	q6, q7, q9
-+	vtrn.32		d0, d6
-+	vshl.i64	q7, q9, #26
-+	vtrn.32		d1, d7
-+	vsub.i64	q2, q5, q2
-+	add		r2, r2, #16
-+	vsub.i64	q3, q4, q7
-+	vst1.8		d0, [r2, : 64]
-+	add		r4, r4, #16
-+	vst1.8		d1, [r4, : 64]
-+	vtrn.32		d4, d2
-+	vtrn.32		d5, d3
-+	sub		r2, r2, #8
-+	sub		r4, r4, #8
-+	vtrn.32		d6, d12
-+	vtrn.32		d7, d13
-+	vst1.8		d4, [r2, : 64]
-+	vst1.8		d5, [r4, : 64]
-+	sub		r2, r2, #24
-+	sub		r4, r4, #24
-+	vst1.8		d6, [r2, : 64]
-+	vst1.8		d7, [r4, : 64]
-+	add		r2, r3, #336
-+	add		r4, r3, #288
-+	vld1.8		{d0-d1}, [r2, : 128]!
-+	vld1.8		{d2-d3}, [r4, : 128]!
-+	vadd.i32	q0, q0, q1
-+	vld1.8		{d2-d3}, [r2, : 128]!
-+	vld1.8		{d4-d5}, [r4, : 128]!
-+	vadd.i32	q1, q1, q2
-+	add		r5, r3, #288
-+	vld1.8		{d4}, [r2, : 64]
-+	vld1.8		{d6}, [r4, : 64]
-+	vadd.i32	q2, q2, q3
-+	vst1.8		{d0-d1}, [r5, : 128]!
-+	vst1.8		{d2-d3}, [r5, : 128]!
-+	vst1.8		d4, [r5, : 64]
-+	add		r2, r3, #48
-+	add		r4, r3, #144
-+	vld1.8		{d0-d1}, [r4, : 128]!
-+	vld1.8		{d2-d3}, [r4, : 128]!
-+	vld1.8		{d4}, [r4, : 64]
-+	add		r4, r3, #288
-+	vld1.8		{d6-d7}, [r4, : 128]!
-+	vtrn.32		q0, q3
-+	vld1.8		{d8-d9}, [r4, : 128]!
-+	vshl.i32	q5, q0, #4
-+	vtrn.32		q1, q4
-+	vshl.i32	q6, q3, #4
-+	vadd.i32	q5, q5, q0
-+	vadd.i32	q6, q6, q3
-+	vshl.i32	q7, q1, #4
-+	vld1.8		{d5}, [r4, : 64]
-+	vshl.i32	q8, q4, #4
-+	vtrn.32		d4, d5
-+	vadd.i32	q7, q7, q1
-+	vadd.i32	q8, q8, q4
-+	vld1.8		{d18-d19}, [r2, : 128]!
-+	vshl.i32	q10, q2, #4
-+	vld1.8		{d22-d23}, [r2, : 128]!
-+	vadd.i32	q10, q10, q2
-+	vld1.8		{d24}, [r2, : 64]
-+	vadd.i32	q5, q5, q0
-+	add		r2, r3, #240
-+	vld1.8		{d26-d27}, [r2, : 128]!
-+	vadd.i32	q6, q6, q3
-+	vld1.8		{d28-d29}, [r2, : 128]!
-+	vadd.i32	q8, q8, q4
-+	vld1.8		{d25}, [r2, : 64]
-+	vadd.i32	q10, q10, q2
-+	vtrn.32		q9, q13
-+	vadd.i32	q7, q7, q1
-+	vadd.i32	q5, q5, q0
-+	vtrn.32		q11, q14
-+	vadd.i32	q6, q6, q3
-+	add		r2, sp, #560
-+	vadd.i32	q10, q10, q2
-+	vtrn.32		d24, d25
-+	vst1.8		{d12-d13}, [r2, : 128]
-+	vshl.i32	q6, q13, #1
-+	add		r2, sp, #576
-+	vst1.8		{d20-d21}, [r2, : 128]
-+	vshl.i32	q10, q14, #1
-+	add		r2, sp, #592
-+	vst1.8		{d12-d13}, [r2, : 128]
-+	vshl.i32	q15, q12, #1
-+	vadd.i32	q8, q8, q4
-+	vext.32		d10, d31, d30, #0
-+	vadd.i32	q7, q7, q1
-+	add		r2, sp, #608
-+	vst1.8		{d16-d17}, [r2, : 128]
-+	vmull.s32	q8, d18, d5
-+	vmlal.s32	q8, d26, d4
-+	vmlal.s32	q8, d19, d9
-+	vmlal.s32	q8, d27, d3
-+	vmlal.s32	q8, d22, d8
-+	vmlal.s32	q8, d28, d2
-+	vmlal.s32	q8, d23, d7
-+	vmlal.s32	q8, d29, d1
-+	vmlal.s32	q8, d24, d6
-+	vmlal.s32	q8, d25, d0
-+	add		r2, sp, #624
-+	vst1.8		{d14-d15}, [r2, : 128]
-+	vmull.s32	q2, d18, d4
-+	vmlal.s32	q2, d12, d9
-+	vmlal.s32	q2, d13, d8
-+	vmlal.s32	q2, d19, d3
-+	vmlal.s32	q2, d22, d2
-+	vmlal.s32	q2, d23, d1
-+	vmlal.s32	q2, d24, d0
-+	add		r2, sp, #640
-+	vst1.8		{d20-d21}, [r2, : 128]
-+	vmull.s32	q7, d18, d9
-+	vmlal.s32	q7, d26, d3
-+	vmlal.s32	q7, d19, d8
-+	vmlal.s32	q7, d27, d2
-+	vmlal.s32	q7, d22, d7
-+	vmlal.s32	q7, d28, d1
-+	vmlal.s32	q7, d23, d6
-+	vmlal.s32	q7, d29, d0
-+	add		r2, sp, #656
-+	vst1.8		{d10-d11}, [r2, : 128]
-+	vmull.s32	q5, d18, d3
-+	vmlal.s32	q5, d19, d2
-+	vmlal.s32	q5, d22, d1
-+	vmlal.s32	q5, d23, d0
-+	vmlal.s32	q5, d12, d8
-+	add		r2, sp, #672
-+	vst1.8		{d16-d17}, [r2, : 128]
-+	vmull.s32	q4, d18, d8
-+	vmlal.s32	q4, d26, d2
-+	vmlal.s32	q4, d19, d7
-+	vmlal.s32	q4, d27, d1
-+	vmlal.s32	q4, d22, d6
-+	vmlal.s32	q4, d28, d0
-+	vmull.s32	q8, d18, d7
-+	vmlal.s32	q8, d26, d1
-+	vmlal.s32	q8, d19, d6
-+	vmlal.s32	q8, d27, d0
-+	add		r2, sp, #576
-+	vld1.8		{d20-d21}, [r2, : 128]
-+	vmlal.s32	q7, d24, d21
-+	vmlal.s32	q7, d25, d20
-+	vmlal.s32	q4, d23, d21
-+	vmlal.s32	q4, d29, d20
-+	vmlal.s32	q8, d22, d21
-+	vmlal.s32	q8, d28, d20
-+	vmlal.s32	q5, d24, d20
-+	add		r2, sp, #576
-+	vst1.8		{d14-d15}, [r2, : 128]
-+	vmull.s32	q7, d18, d6
-+	vmlal.s32	q7, d26, d0
-+	add		r2, sp, #656
-+	vld1.8		{d30-d31}, [r2, : 128]
-+	vmlal.s32	q2, d30, d21
-+	vmlal.s32	q7, d19, d21
-+	vmlal.s32	q7, d27, d20
-+	add		r2, sp, #624
-+	vld1.8		{d26-d27}, [r2, : 128]
-+	vmlal.s32	q4, d25, d27
-+	vmlal.s32	q8, d29, d27
-+	vmlal.s32	q8, d25, d26
-+	vmlal.s32	q7, d28, d27
-+	vmlal.s32	q7, d29, d26
-+	add		r2, sp, #608
-+	vld1.8		{d28-d29}, [r2, : 128]
-+	vmlal.s32	q4, d24, d29
-+	vmlal.s32	q8, d23, d29
-+	vmlal.s32	q8, d24, d28
-+	vmlal.s32	q7, d22, d29
-+	vmlal.s32	q7, d23, d28
-+	add		r2, sp, #608
-+	vst1.8		{d8-d9}, [r2, : 128]
-+	add		r2, sp, #560
-+	vld1.8		{d8-d9}, [r2, : 128]
-+	vmlal.s32	q7, d24, d9
-+	vmlal.s32	q7, d25, d31
-+	vmull.s32	q1, d18, d2
-+	vmlal.s32	q1, d19, d1
-+	vmlal.s32	q1, d22, d0
-+	vmlal.s32	q1, d24, d27
-+	vmlal.s32	q1, d23, d20
-+	vmlal.s32	q1, d12, d7
-+	vmlal.s32	q1, d13, d6
-+	vmull.s32	q6, d18, d1
-+	vmlal.s32	q6, d19, d0
-+	vmlal.s32	q6, d23, d27
-+	vmlal.s32	q6, d22, d20
-+	vmlal.s32	q6, d24, d26
-+	vmull.s32	q0, d18, d0
-+	vmlal.s32	q0, d22, d27
-+	vmlal.s32	q0, d23, d26
-+	vmlal.s32	q0, d24, d31
-+	vmlal.s32	q0, d19, d20
-+	add		r2, sp, #640
-+	vld1.8		{d18-d19}, [r2, : 128]
-+	vmlal.s32	q2, d18, d7
-+	vmlal.s32	q2, d19, d6
-+	vmlal.s32	q5, d18, d6
-+	vmlal.s32	q5, d19, d21
-+	vmlal.s32	q1, d18, d21
-+	vmlal.s32	q1, d19, d29
-+	vmlal.s32	q0, d18, d28
-+	vmlal.s32	q0, d19, d9
-+	vmlal.s32	q6, d18, d29
-+	vmlal.s32	q6, d19, d28
-+	add		r2, sp, #592
-+	vld1.8		{d18-d19}, [r2, : 128]
-+	add		r2, sp, #512
-+	vld1.8		{d22-d23}, [r2, : 128]
-+	vmlal.s32	q5, d19, d7
-+	vmlal.s32	q0, d18, d21
-+	vmlal.s32	q0, d19, d29
-+	vmlal.s32	q6, d18, d6
-+	add		r2, sp, #528
-+	vld1.8		{d6-d7}, [r2, : 128]
-+	vmlal.s32	q6, d19, d21
-+	add		r2, sp, #576
-+	vld1.8		{d18-d19}, [r2, : 128]
-+	vmlal.s32	q0, d30, d8
-+	add		r2, sp, #672
-+	vld1.8		{d20-d21}, [r2, : 128]
-+	vmlal.s32	q5, d30, d29
-+	add		r2, sp, #608
-+	vld1.8		{d24-d25}, [r2, : 128]
-+	vmlal.s32	q1, d30, d28
-+	vadd.i64	q13, q0, q11
-+	vadd.i64	q14, q5, q11
-+	vmlal.s32	q6, d30, d9
-+	vshr.s64	q4, q13, #26
-+	vshr.s64	q13, q14, #26
-+	vadd.i64	q7, q7, q4
-+	vshl.i64	q4, q4, #26
-+	vadd.i64	q14, q7, q3
-+	vadd.i64	q9, q9, q13
-+	vshl.i64	q13, q13, #26
-+	vadd.i64	q15, q9, q3
-+	vsub.i64	q0, q0, q4
-+	vshr.s64	q4, q14, #25
-+	vsub.i64	q5, q5, q13
-+	vshr.s64	q13, q15, #25
-+	vadd.i64	q6, q6, q4
-+	vshl.i64	q4, q4, #25
-+	vadd.i64	q14, q6, q11
-+	vadd.i64	q2, q2, q13
-+	vsub.i64	q4, q7, q4
-+	vshr.s64	q7, q14, #26
-+	vshl.i64	q13, q13, #25
-+	vadd.i64	q14, q2, q11
-+	vadd.i64	q8, q8, q7
-+	vshl.i64	q7, q7, #26
-+	vadd.i64	q15, q8, q3
-+	vsub.i64	q9, q9, q13
-+	vshr.s64	q13, q14, #26
-+	vsub.i64	q6, q6, q7
-+	vshr.s64	q7, q15, #25
-+	vadd.i64	q10, q10, q13
-+	vshl.i64	q13, q13, #26
-+	vadd.i64	q14, q10, q3
-+	vadd.i64	q1, q1, q7
-+	add		r2, r3, #240
-+	vshl.i64	q7, q7, #25
-+	add		r4, r3, #144
-+	vadd.i64	q15, q1, q11
-+	add		r2, r2, #8
-+	vsub.i64	q2, q2, q13
-+	add		r4, r4, #8
-+	vshr.s64	q13, q14, #25
-+	vsub.i64	q7, q8, q7
-+	vshr.s64	q8, q15, #26
-+	vadd.i64	q14, q13, q13
-+	vadd.i64	q12, q12, q8
-+	vtrn.32		d12, d14
-+	vshl.i64	q8, q8, #26
-+	vtrn.32		d13, d15
-+	vadd.i64	q3, q12, q3
-+	vadd.i64	q0, q0, q14
-+	vst1.8		d12, [r2, : 64]!
-+	vshl.i64	q7, q13, #4
-+	vst1.8		d13, [r4, : 64]!
-+	vsub.i64	q1, q1, q8
-+	vshr.s64	q3, q3, #25
-+	vadd.i64	q0, q0, q7
-+	vadd.i64	q5, q5, q3
-+	vshl.i64	q3, q3, #25
-+	vadd.i64	q6, q5, q11
-+	vadd.i64	q0, q0, q13
-+	vshl.i64	q7, q13, #25
-+	vadd.i64	q8, q0, q11
-+	vsub.i64	q3, q12, q3
-+	vshr.s64	q6, q6, #26
-+	vsub.i64	q7, q10, q7
-+	vtrn.32		d2, d6
-+	vshr.s64	q8, q8, #26
-+	vtrn.32		d3, d7
-+	vadd.i64	q3, q9, q6
-+	vst1.8		d2, [r2, : 64]
-+	vshl.i64	q6, q6, #26
-+	vst1.8		d3, [r4, : 64]
-+	vadd.i64	q1, q4, q8
-+	vtrn.32		d4, d14
-+	vshl.i64	q4, q8, #26
-+	vtrn.32		d5, d15
-+	vsub.i64	q5, q5, q6
-+	add		r2, r2, #16
-+	vsub.i64	q0, q0, q4
-+	vst1.8		d4, [r2, : 64]
-+	add		r4, r4, #16
-+	vst1.8		d5, [r4, : 64]
-+	vtrn.32		d10, d6
-+	vtrn.32		d11, d7
-+	sub		r2, r2, #8
-+	sub		r4, r4, #8
-+	vtrn.32		d0, d2
-+	vtrn.32		d1, d3
-+	vst1.8		d10, [r2, : 64]
-+	vst1.8		d11, [r4, : 64]
-+	sub		r2, r2, #24
-+	sub		r4, r4, #24
-+	vst1.8		d0, [r2, : 64]
-+	vst1.8		d1, [r4, : 64]
-+	ldr		r2, [sp, #488]
-+	ldr		r4, [sp, #492]
-+	subs		r5, r2, #1
-+	bge		._mainloop
-+	add		r1, r3, #144
-+	add		r2, r3, #336
-+	vld1.8		{d0-d1}, [r1, : 128]!
-+	vld1.8		{d2-d3}, [r1, : 128]!
-+	vld1.8		{d4}, [r1, : 64]
-+	vst1.8		{d0-d1}, [r2, : 128]!
-+	vst1.8		{d2-d3}, [r2, : 128]!
-+	vst1.8		d4, [r2, : 64]
-+	ldr		r1, =0
-+._invertloop:
-+	add		r2, r3, #144
-+	ldr		r4, =0
-+	ldr		r5, =2
-+	cmp		r1, #1
-+	ldreq		r5, =1
-+	addeq		r2, r3, #336
-+	addeq		r4, r3, #48
-+	cmp		r1, #2
-+	ldreq		r5, =1
-+	addeq		r2, r3, #48
-+	cmp		r1, #3
-+	ldreq		r5, =5
-+	addeq		r4, r3, #336
-+	cmp		r1, #4
-+	ldreq		r5, =10
-+	cmp		r1, #5
-+	ldreq		r5, =20
-+	cmp		r1, #6
-+	ldreq		r5, =10
-+	addeq		r2, r3, #336
-+	addeq		r4, r3, #336
-+	cmp		r1, #7
-+	ldreq		r5, =50
-+	cmp		r1, #8
-+	ldreq		r5, =100
-+	cmp		r1, #9
-+	ldreq		r5, =50
-+	addeq		r2, r3, #336
-+	cmp		r1, #10
-+	ldreq		r5, =5
-+	addeq		r2, r3, #48
-+	cmp		r1, #11
-+	ldreq		r5, =0
-+	addeq		r2, r3, #96
-+	add		r6, r3, #144
-+	add		r7, r3, #288
-+	vld1.8		{d0-d1}, [r6, : 128]!
-+	vld1.8		{d2-d3}, [r6, : 128]!
-+	vld1.8		{d4}, [r6, : 64]
-+	vst1.8		{d0-d1}, [r7, : 128]!
-+	vst1.8		{d2-d3}, [r7, : 128]!
-+	vst1.8		d4, [r7, : 64]
-+	cmp		r5, #0
-+	beq		._skipsquaringloop
-+._squaringloop:
-+	add		r6, r3, #288
-+	add		r7, r3, #288
-+	add		r8, r3, #288
-+	vmov.i32	q0, #19
-+	vmov.i32	q1, #0
-+	vmov.i32	q2, #1
-+	vzip.i32	q1, q2
-+	vld1.8		{d4-d5}, [r7, : 128]!
-+	vld1.8		{d6-d7}, [r7, : 128]!
-+	vld1.8		{d9}, [r7, : 64]
-+	vld1.8		{d10-d11}, [r6, : 128]!
-+	add		r7, sp, #416
-+	vld1.8		{d12-d13}, [r6, : 128]!
-+	vmul.i32	q7, q2, q0
-+	vld1.8		{d8}, [r6, : 64]
-+	vext.32		d17, d11, d10, #1
-+	vmul.i32	q9, q3, q0
-+	vext.32		d16, d10, d8, #1
-+	vshl.u32	q10, q5, q1
-+	vext.32		d22, d14, d4, #1
-+	vext.32		d24, d18, d6, #1
-+	vshl.u32	q13, q6, q1
-+	vshl.u32	d28, d8, d2
-+	vrev64.i32	d22, d22
-+	vmul.i32	d1, d9, d1
-+	vrev64.i32	d24, d24
-+	vext.32		d29, d8, d13, #1
-+	vext.32		d0, d1, d9, #1
-+	vrev64.i32	d0, d0
-+	vext.32		d2, d9, d1, #1
-+	vext.32		d23, d15, d5, #1
-+	vmull.s32	q4, d20, d4
-+	vrev64.i32	d23, d23
-+	vmlal.s32	q4, d21, d1
-+	vrev64.i32	d2, d2
-+	vmlal.s32	q4, d26, d19
-+	vext.32		d3, d5, d15, #1
-+	vmlal.s32	q4, d27, d18
-+	vrev64.i32	d3, d3
-+	vmlal.s32	q4, d28, d15
-+	vext.32		d14, d12, d11, #1
-+	vmull.s32	q5, d16, d23
-+	vext.32		d15, d13, d12, #1
-+	vmlal.s32	q5, d17, d4
-+	vst1.8		d8, [r7, : 64]!
-+	vmlal.s32	q5, d14, d1
-+	vext.32		d12, d9, d8, #0
-+	vmlal.s32	q5, d15, d19
-+	vmov.i64	d13, #0
-+	vmlal.s32	q5, d29, d18
-+	vext.32		d25, d19, d7, #1
-+	vmlal.s32	q6, d20, d5
-+	vrev64.i32	d25, d25
-+	vmlal.s32	q6, d21, d4
-+	vst1.8		d11, [r7, : 64]!
-+	vmlal.s32	q6, d26, d1
-+	vext.32		d9, d10, d10, #0
-+	vmlal.s32	q6, d27, d19
-+	vmov.i64	d8, #0
-+	vmlal.s32	q6, d28, d18
-+	vmlal.s32	q4, d16, d24
-+	vmlal.s32	q4, d17, d5
-+	vmlal.s32	q4, d14, d4
-+	vst1.8		d12, [r7, : 64]!
-+	vmlal.s32	q4, d15, d1
-+	vext.32		d10, d13, d12, #0
-+	vmlal.s32	q4, d29, d19
-+	vmov.i64	d11, #0
-+	vmlal.s32	q5, d20, d6
-+	vmlal.s32	q5, d21, d5
-+	vmlal.s32	q5, d26, d4
-+	vext.32		d13, d8, d8, #0
-+	vmlal.s32	q5, d27, d1
-+	vmov.i64	d12, #0
-+	vmlal.s32	q5, d28, d19
-+	vst1.8		d9, [r7, : 64]!
-+	vmlal.s32	q6, d16, d25
-+	vmlal.s32	q6, d17, d6
-+	vst1.8		d10, [r7, : 64]
-+	vmlal.s32	q6, d14, d5
-+	vext.32		d8, d11, d10, #0
-+	vmlal.s32	q6, d15, d4
-+	vmov.i64	d9, #0
-+	vmlal.s32	q6, d29, d1
-+	vmlal.s32	q4, d20, d7
-+	vmlal.s32	q4, d21, d6
-+	vmlal.s32	q4, d26, d5
-+	vext.32		d11, d12, d12, #0
-+	vmlal.s32	q4, d27, d4
-+	vmov.i64	d10, #0
-+	vmlal.s32	q4, d28, d1
-+	vmlal.s32	q5, d16, d0
-+	sub		r6, r7, #32
-+	vmlal.s32	q5, d17, d7
-+	vmlal.s32	q5, d14, d6
-+	vext.32		d30, d9, d8, #0
-+	vmlal.s32	q5, d15, d5
-+	vld1.8		{d31}, [r6, : 64]!
-+	vmlal.s32	q5, d29, d4
-+	vmlal.s32	q15, d20, d0
-+	vext.32		d0, d6, d18, #1
-+	vmlal.s32	q15, d21, d25
-+	vrev64.i32	d0, d0
-+	vmlal.s32	q15, d26, d24
-+	vext.32		d1, d7, d19, #1
-+	vext.32		d7, d10, d10, #0
-+	vmlal.s32	q15, d27, d23
-+	vrev64.i32	d1, d1
-+	vld1.8		{d6}, [r6, : 64]
-+	vmlal.s32	q15, d28, d22
-+	vmlal.s32	q3, d16, d4
-+	add		r6, r6, #24
-+	vmlal.s32	q3, d17, d2
-+	vext.32		d4, d31, d30, #0
-+	vmov		d17, d11
-+	vmlal.s32	q3, d14, d1
-+	vext.32		d11, d13, d13, #0
-+	vext.32		d13, d30, d30, #0
-+	vmlal.s32	q3, d15, d0
-+	vext.32		d1, d8, d8, #0
-+	vmlal.s32	q3, d29, d3
-+	vld1.8		{d5}, [r6, : 64]
-+	sub		r6, r6, #16
-+	vext.32		d10, d6, d6, #0
-+	vmov.i32	q1, #0xffffffff
-+	vshl.i64	q4, q1, #25
-+	add		r7, sp, #512
-+	vld1.8		{d14-d15}, [r7, : 128]
-+	vadd.i64	q9, q2, q7
-+	vshl.i64	q1, q1, #26
-+	vshr.s64	q10, q9, #26
-+	vld1.8		{d0}, [r6, : 64]!
-+	vadd.i64	q5, q5, q10
-+	vand		q9, q9, q1
-+	vld1.8		{d16}, [r6, : 64]!
-+	add		r6, sp, #528
-+	vld1.8		{d20-d21}, [r6, : 128]
-+	vadd.i64	q11, q5, q10
-+	vsub.i64	q2, q2, q9
-+	vshr.s64	q9, q11, #25
-+	vext.32		d12, d5, d4, #0
-+	vand		q11, q11, q4
-+	vadd.i64	q0, q0, q9
-+	vmov		d19, d7
-+	vadd.i64	q3, q0, q7
-+	vsub.i64	q5, q5, q11
-+	vshr.s64	q11, q3, #26
-+	vext.32		d18, d11, d10, #0
-+	vand		q3, q3, q1
-+	vadd.i64	q8, q8, q11
-+	vadd.i64	q11, q8, q10
-+	vsub.i64	q0, q0, q3
-+	vshr.s64	q3, q11, #25
-+	vand		q11, q11, q4
-+	vadd.i64	q3, q6, q3
-+	vadd.i64	q6, q3, q7
-+	vsub.i64	q8, q8, q11
-+	vshr.s64	q11, q6, #26
-+	vand		q6, q6, q1
-+	vadd.i64	q9, q9, q11
-+	vadd.i64	d25, d19, d21
-+	vsub.i64	q3, q3, q6
-+	vshr.s64	d23, d25, #25
-+	vand		q4, q12, q4
-+	vadd.i64	d21, d23, d23
-+	vshl.i64	d25, d23, #4
-+	vadd.i64	d21, d21, d23
-+	vadd.i64	d25, d25, d21
-+	vadd.i64	d4, d4, d25
-+	vzip.i32	q0, q8
-+	vadd.i64	d12, d4, d14
-+	add		r6, r8, #8
-+	vst1.8		d0, [r6, : 64]
-+	vsub.i64	d19, d19, d9
-+	add		r6, r6, #16
-+	vst1.8		d16, [r6, : 64]
-+	vshr.s64	d22, d12, #26
-+	vand		q0, q6, q1
-+	vadd.i64	d10, d10, d22
-+	vzip.i32	q3, q9
-+	vsub.i64	d4, d4, d0
-+	sub		r6, r6, #8
-+	vst1.8		d6, [r6, : 64]
-+	add		r6, r6, #16
-+	vst1.8		d18, [r6, : 64]
-+	vzip.i32	q2, q5
-+	sub		r6, r6, #32
-+	vst1.8		d4, [r6, : 64]
-+	subs		r5, r5, #1
-+	bhi		._squaringloop
-+._skipsquaringloop:
-+	mov		r2, r2
-+	add		r5, r3, #288
-+	add		r6, r3, #144
-+	vmov.i32	q0, #19
-+	vmov.i32	q1, #0
-+	vmov.i32	q2, #1
-+	vzip.i32	q1, q2
-+	vld1.8		{d4-d5}, [r5, : 128]!
-+	vld1.8		{d6-d7}, [r5, : 128]!
-+	vld1.8		{d9}, [r5, : 64]
-+	vld1.8		{d10-d11}, [r2, : 128]!
-+	add		r5, sp, #416
-+	vld1.8		{d12-d13}, [r2, : 128]!
-+	vmul.i32	q7, q2, q0
-+	vld1.8		{d8}, [r2, : 64]
-+	vext.32		d17, d11, d10, #1
-+	vmul.i32	q9, q3, q0
-+	vext.32		d16, d10, d8, #1
-+	vshl.u32	q10, q5, q1
-+	vext.32		d22, d14, d4, #1
-+	vext.32		d24, d18, d6, #1
-+	vshl.u32	q13, q6, q1
-+	vshl.u32	d28, d8, d2
-+	vrev64.i32	d22, d22
-+	vmul.i32	d1, d9, d1
-+	vrev64.i32	d24, d24
-+	vext.32		d29, d8, d13, #1
-+	vext.32		d0, d1, d9, #1
-+	vrev64.i32	d0, d0
-+	vext.32		d2, d9, d1, #1
-+	vext.32		d23, d15, d5, #1
-+	vmull.s32	q4, d20, d4
-+	vrev64.i32	d23, d23
-+	vmlal.s32	q4, d21, d1
-+	vrev64.i32	d2, d2
-+	vmlal.s32	q4, d26, d19
-+	vext.32		d3, d5, d15, #1
-+	vmlal.s32	q4, d27, d18
-+	vrev64.i32	d3, d3
-+	vmlal.s32	q4, d28, d15
-+	vext.32		d14, d12, d11, #1
-+	vmull.s32	q5, d16, d23
-+	vext.32		d15, d13, d12, #1
-+	vmlal.s32	q5, d17, d4
-+	vst1.8		d8, [r5, : 64]!
-+	vmlal.s32	q5, d14, d1
-+	vext.32		d12, d9, d8, #0
-+	vmlal.s32	q5, d15, d19
-+	vmov.i64	d13, #0
-+	vmlal.s32	q5, d29, d18
-+	vext.32		d25, d19, d7, #1
-+	vmlal.s32	q6, d20, d5
-+	vrev64.i32	d25, d25
-+	vmlal.s32	q6, d21, d4
-+	vst1.8		d11, [r5, : 64]!
-+	vmlal.s32	q6, d26, d1
-+	vext.32		d9, d10, d10, #0
-+	vmlal.s32	q6, d27, d19
-+	vmov.i64	d8, #0
-+	vmlal.s32	q6, d28, d18
-+	vmlal.s32	q4, d16, d24
-+	vmlal.s32	q4, d17, d5
-+	vmlal.s32	q4, d14, d4
-+	vst1.8		d12, [r5, : 64]!
-+	vmlal.s32	q4, d15, d1
-+	vext.32		d10, d13, d12, #0
-+	vmlal.s32	q4, d29, d19
-+	vmov.i64	d11, #0
-+	vmlal.s32	q5, d20, d6
-+	vmlal.s32	q5, d21, d5
-+	vmlal.s32	q5, d26, d4
-+	vext.32		d13, d8, d8, #0
-+	vmlal.s32	q5, d27, d1
-+	vmov.i64	d12, #0
-+	vmlal.s32	q5, d28, d19
-+	vst1.8		d9, [r5, : 64]!
-+	vmlal.s32	q6, d16, d25
-+	vmlal.s32	q6, d17, d6
-+	vst1.8		d10, [r5, : 64]
-+	vmlal.s32	q6, d14, d5
-+	vext.32		d8, d11, d10, #0
-+	vmlal.s32	q6, d15, d4
-+	vmov.i64	d9, #0
-+	vmlal.s32	q6, d29, d1
-+	vmlal.s32	q4, d20, d7
-+	vmlal.s32	q4, d21, d6
-+	vmlal.s32	q4, d26, d5
-+	vext.32		d11, d12, d12, #0
-+	vmlal.s32	q4, d27, d4
-+	vmov.i64	d10, #0
-+	vmlal.s32	q4, d28, d1
-+	vmlal.s32	q5, d16, d0
-+	sub		r2, r5, #32
-+	vmlal.s32	q5, d17, d7
-+	vmlal.s32	q5, d14, d6
-+	vext.32		d30, d9, d8, #0
-+	vmlal.s32	q5, d15, d5
-+	vld1.8		{d31}, [r2, : 64]!
-+	vmlal.s32	q5, d29, d4
-+	vmlal.s32	q15, d20, d0
-+	vext.32		d0, d6, d18, #1
-+	vmlal.s32	q15, d21, d25
-+	vrev64.i32	d0, d0
-+	vmlal.s32	q15, d26, d24
-+	vext.32		d1, d7, d19, #1
-+	vext.32		d7, d10, d10, #0
-+	vmlal.s32	q15, d27, d23
-+	vrev64.i32	d1, d1
-+	vld1.8		{d6}, [r2, : 64]
-+	vmlal.s32	q15, d28, d22
-+	vmlal.s32	q3, d16, d4
-+	add		r2, r2, #24
-+	vmlal.s32	q3, d17, d2
-+	vext.32		d4, d31, d30, #0
-+	vmov		d17, d11
-+	vmlal.s32	q3, d14, d1
-+	vext.32		d11, d13, d13, #0
-+	vext.32		d13, d30, d30, #0
-+	vmlal.s32	q3, d15, d0
-+	vext.32		d1, d8, d8, #0
-+	vmlal.s32	q3, d29, d3
-+	vld1.8		{d5}, [r2, : 64]
-+	sub		r2, r2, #16
-+	vext.32		d10, d6, d6, #0
-+	vmov.i32	q1, #0xffffffff
-+	vshl.i64	q4, q1, #25
-+	add		r5, sp, #512
-+	vld1.8		{d14-d15}, [r5, : 128]
-+	vadd.i64	q9, q2, q7
-+	vshl.i64	q1, q1, #26
-+	vshr.s64	q10, q9, #26
-+	vld1.8		{d0}, [r2, : 64]!
-+	vadd.i64	q5, q5, q10
-+	vand		q9, q9, q1
-+	vld1.8		{d16}, [r2, : 64]!
-+	add		r2, sp, #528
-+	vld1.8		{d20-d21}, [r2, : 128]
-+	vadd.i64	q11, q5, q10
-+	vsub.i64	q2, q2, q9
-+	vshr.s64	q9, q11, #25
-+	vext.32		d12, d5, d4, #0
-+	vand		q11, q11, q4
-+	vadd.i64	q0, q0, q9
-+	vmov		d19, d7
-+	vadd.i64	q3, q0, q7
-+	vsub.i64	q5, q5, q11
-+	vshr.s64	q11, q3, #26
-+	vext.32		d18, d11, d10, #0
-+	vand		q3, q3, q1
-+	vadd.i64	q8, q8, q11
-+	vadd.i64	q11, q8, q10
-+	vsub.i64	q0, q0, q3
-+	vshr.s64	q3, q11, #25
-+	vand		q11, q11, q4
-+	vadd.i64	q3, q6, q3
-+	vadd.i64	q6, q3, q7
-+	vsub.i64	q8, q8, q11
-+	vshr.s64	q11, q6, #26
-+	vand		q6, q6, q1
-+	vadd.i64	q9, q9, q11
-+	vadd.i64	d25, d19, d21
-+	vsub.i64	q3, q3, q6
-+	vshr.s64	d23, d25, #25
-+	vand		q4, q12, q4
-+	vadd.i64	d21, d23, d23
-+	vshl.i64	d25, d23, #4
-+	vadd.i64	d21, d21, d23
-+	vadd.i64	d25, d25, d21
-+	vadd.i64	d4, d4, d25
-+	vzip.i32	q0, q8
-+	vadd.i64	d12, d4, d14
-+	add		r2, r6, #8
-+	vst1.8		d0, [r2, : 64]
-+	vsub.i64	d19, d19, d9
-+	add		r2, r2, #16
-+	vst1.8		d16, [r2, : 64]
-+	vshr.s64	d22, d12, #26
-+	vand		q0, q6, q1
-+	vadd.i64	d10, d10, d22
-+	vzip.i32	q3, q9
-+	vsub.i64	d4, d4, d0
-+	sub		r2, r2, #8
-+	vst1.8		d6, [r2, : 64]
-+	add		r2, r2, #16
-+	vst1.8		d18, [r2, : 64]
-+	vzip.i32	q2, q5
-+	sub		r2, r2, #32
-+	vst1.8		d4, [r2, : 64]
-+	cmp		r4, #0
-+	beq		._skippostcopy
-+	add		r2, r3, #144
-+	mov		r4, r4
-+	vld1.8		{d0-d1}, [r2, : 128]!
-+	vld1.8		{d2-d3}, [r2, : 128]!
-+	vld1.8		{d4}, [r2, : 64]
-+	vst1.8		{d0-d1}, [r4, : 128]!
-+	vst1.8		{d2-d3}, [r4, : 128]!
-+	vst1.8		d4, [r4, : 64]
-+._skippostcopy:
-+	cmp		r1, #1
-+	bne		._skipfinalcopy
-+	add		r2, r3, #288
-+	add		r4, r3, #144
-+	vld1.8		{d0-d1}, [r2, : 128]!
-+	vld1.8		{d2-d3}, [r2, : 128]!
-+	vld1.8		{d4}, [r2, : 64]
-+	vst1.8		{d0-d1}, [r4, : 128]!
-+	vst1.8		{d2-d3}, [r4, : 128]!
-+	vst1.8		d4, [r4, : 64]
-+._skipfinalcopy:
-+	add		r1, r1, #1
-+	cmp		r1, #12
-+	blo		._invertloop
-+	add		r1, r3, #144
-+	ldr		r2, [r1], #4
-+	ldr		r3, [r1], #4
-+	ldr		r4, [r1], #4
-+	ldr		r5, [r1], #4
-+	ldr		r6, [r1], #4
-+	ldr		r7, [r1], #4
-+	ldr		r8, [r1], #4
-+	ldr		r9, [r1], #4
-+	ldr		r10, [r1], #4
-+	ldr		r1, [r1]
-+	add		r11, r1, r1, LSL #4
-+	add		r11, r11, r1, LSL #1
-+	add		r11, r11, #16777216
-+	mov		r11, r11, ASR #25
-+	add		r11, r11, r2
-+	mov		r11, r11, ASR #26
-+	add		r11, r11, r3
-+	mov		r11, r11, ASR #25
-+	add		r11, r11, r4
-+	mov		r11, r11, ASR #26
-+	add		r11, r11, r5
-+	mov		r11, r11, ASR #25
-+	add		r11, r11, r6
-+	mov		r11, r11, ASR #26
-+	add		r11, r11, r7
-+	mov		r11, r11, ASR #25
-+	add		r11, r11, r8
-+	mov		r11, r11, ASR #26
-+	add		r11, r11, r9
-+	mov		r11, r11, ASR #25
-+	add		r11, r11, r10
-+	mov		r11, r11, ASR #26
-+	add		r11, r11, r1
-+	mov		r11, r11, ASR #25
-+	add		r2, r2, r11
-+	add		r2, r2, r11, LSL #1
-+	add		r2, r2, r11, LSL #4
-+	mov		r11, r2, ASR #26
-+	add		r3, r3, r11
-+	sub		r2, r2, r11, LSL #26
-+	mov		r11, r3, ASR #25
-+	add		r4, r4, r11
-+	sub		r3, r3, r11, LSL #25
-+	mov		r11, r4, ASR #26
-+	add		r5, r5, r11
-+	sub		r4, r4, r11, LSL #26
-+	mov		r11, r5, ASR #25
-+	add		r6, r6, r11
-+	sub		r5, r5, r11, LSL #25
-+	mov		r11, r6, ASR #26
-+	add		r7, r7, r11
-+	sub		r6, r6, r11, LSL #26
-+	mov		r11, r7, ASR #25
-+	add		r8, r8, r11
-+	sub		r7, r7, r11, LSL #25
-+	mov		r11, r8, ASR #26
-+	add		r9, r9, r11
-+	sub		r8, r8, r11, LSL #26
-+	mov		r11, r9, ASR #25
-+	add		r10, r10, r11
-+	sub		r9, r9, r11, LSL #25
-+	mov		r11, r10, ASR #26
-+	add		r1, r1, r11
-+	sub		r10, r10, r11, LSL #26
-+	mov		r11, r1, ASR #25
-+	sub		r1, r1, r11, LSL #25
-+	add		r2, r2, r3, LSL #26
-+	mov		r3, r3, LSR #6
-+	add		r3, r3, r4, LSL #19
-+	mov		r4, r4, LSR #13
-+	add		r4, r4, r5, LSL #13
-+	mov		r5, r5, LSR #19
-+	add		r5, r5, r6, LSL #6
-+	add		r6, r7, r8, LSL #25
-+	mov		r7, r8, LSR #7
-+	add		r7, r7, r9, LSL #19
-+	mov		r8, r9, LSR #13
-+	add		r8, r8, r10, LSL #12
-+	mov		r9, r10, LSR #20
-+	add		r1, r9, r1, LSL #6
-+	str		r2, [r0], #4
-+	str		r3, [r0], #4
-+	str		r4, [r0], #4
-+	str		r5, [r0], #4
-+	str		r6, [r0], #4
-+	str		r7, [r0], #4
-+	str		r8, [r0], #4
-+	str		r1, [r0]
-+	ldrd		r4, [sp, #0]
-+	ldrd		r6, [sp, #8]
-+	ldrd		r8, [sp, #16]
-+	ldrd		r10, [sp, #24]
-+	ldr		r12, [sp, #480]
-+	ldr		r14, [sp, #484]
-+	ldr		r0, =0
-+	mov		sp, r12
-+	vpop		{q4, q5, q6, q7}
-+	bx		lr
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0031-crypto-arm-curve25519-wire-up-NEON-implementation.patch b/target/linux/generic/backport-5.4/080-wireguard-0031-crypto-arm-curve25519-wire-up-NEON-implementation.patch
deleted file mode 100644
index d84726b616..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0031-crypto-arm-curve25519-wire-up-NEON-implementation.patch
+++ /dev/null
@@ -1,1058 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 8 Nov 2019 13:22:38 +0100
-Subject: [PATCH] crypto: arm/curve25519 - wire up NEON implementation
-
-commit d8f1308a025fc7e00414194ed742d5f05a21e13c upstream.
-
-This ports the SUPERCOP implementation for usage in kernel space. In
-addition to the usual header, macro, and style changes required for
-kernel space, it makes a few small changes to the code:
-
-  - The stack alignment is relaxed to 16 bytes.
-  - Superfluous mov statements have been removed.
-  - ldr for constants has been replaced with movw.
-  - ldreq has been replaced with moveq.
-  - The str epilogue has been made more idiomatic.
-  - SIMD registers are not pushed and popped at the beginning and end.
-  - The prologue and epilogue have been made idiomatic.
-  - A hole has been removed from the stack, saving 32 bytes.
-  - We write-back the base register whenever possible for vld1.8.
-  - Some multiplications have been reordered for better A7 performance.
-
-There are more opportunities for cleanup, since this code is from qhasm,
-which doesn't always do the most opportune thing. But even prior to
-extensive hand optimizations, this code delivers significant performance
-improvements (given in get_cycles() per call):
-
-		      ----------- -------------
-	             | generic C | this commit |
-	 ------------ ----------- -------------
-	| Cortex-A7  |     49136 |       22395 |
-	 ------------ ----------- -------------
-	| Cortex-A17 |     17326 |        4983 |
-	 ------------ ----------- -------------
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-[ardb: - move to arch/arm/crypto
-       - wire into lib/crypto framework
-       - implement crypto API KPP hooks ]
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/Kconfig           |   6 +
- arch/arm/crypto/Makefile          |   2 +
- arch/arm/crypto/curve25519-core.S | 347 +++++++++++++-----------------
- arch/arm/crypto/curve25519-glue.c | 127 +++++++++++
- 4 files changed, 287 insertions(+), 195 deletions(-)
- create mode 100644 arch/arm/crypto/curve25519-glue.c
-
---- a/arch/arm/crypto/Kconfig
-+++ b/arch/arm/crypto/Kconfig
-@@ -141,4 +141,10 @@ config CRYPTO_NHPOLY1305_NEON
- 	depends on KERNEL_MODE_NEON
- 	select CRYPTO_NHPOLY1305
- 
-+config CRYPTO_CURVE25519_NEON
-+	tristate "NEON accelerated Curve25519 scalar multiplication library"
-+	depends on KERNEL_MODE_NEON
-+	select CRYPTO_LIB_CURVE25519_GENERIC
-+	select CRYPTO_ARCH_HAVE_LIB_CURVE25519
-+
- endif
---- a/arch/arm/crypto/Makefile
-+++ b/arch/arm/crypto/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha51
- obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
- obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o
- obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o
-+obj-$(CONFIG_CRYPTO_CURVE25519_NEON) += curve25519-neon.o
- 
- ce-obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o
- ce-obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o
-@@ -58,6 +59,7 @@ chacha-neon-y := chacha-scalar-core.o ch
- chacha-neon-$(CONFIG_KERNEL_MODE_NEON) += chacha-neon-core.o
- poly1305-arm-y := poly1305-core.o poly1305-glue.o
- nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o
-+curve25519-neon-y := curve25519-core.o curve25519-glue.o
- 
- ifdef REGENERATE_ARM_CRYPTO
- quiet_cmd_perl = PERL    $@
---- a/arch/arm/crypto/curve25519-core.S
-+++ b/arch/arm/crypto/curve25519-core.S
-@@ -1,43 +1,35 @@
-+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
- /*
-- * Public domain code from Daniel J. Bernstein and Peter Schwabe, from
-- * SUPERCOP's curve25519/neon2/scalarmult.s.
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ *
-+ * Based on public domain code from Daniel J. Bernstein and Peter Schwabe. This
-+ * began from SUPERCOP's curve25519/neon2/scalarmult.s, but has subsequently been
-+ * manually reworked for use in kernel space.
-  */
- 
--.fpu neon
-+#include <linux/linkage.h>
-+
- .text
-+.fpu neon
-+.arch armv7-a
- .align 4
--.global _crypto_scalarmult_curve25519_neon2
--.global crypto_scalarmult_curve25519_neon2
--.type _crypto_scalarmult_curve25519_neon2 STT_FUNC
--.type crypto_scalarmult_curve25519_neon2 STT_FUNC
--	_crypto_scalarmult_curve25519_neon2:
--	crypto_scalarmult_curve25519_neon2:
--	vpush		{q4, q5, q6, q7}
--	mov		r12, sp
--	sub		sp, sp, #736
--	and		sp, sp, #0xffffffe0
--	strd		r4, [sp, #0]
--	strd		r6, [sp, #8]
--	strd		r8, [sp, #16]
--	strd		r10, [sp, #24]
--	str		r12, [sp, #480]
--	str		r14, [sp, #484]
--	mov		r0, r0
--	mov		r1, r1
--	mov		r2, r2
--	add		r3, sp, #32
--	ldr		r4, =0
--	ldr		r5, =254
-+
-+ENTRY(curve25519_neon)
-+	push		{r4-r11, lr}
-+	mov		ip, sp
-+	sub		r3, sp, #704
-+	and		r3, r3, #0xfffffff0
-+	mov		sp, r3
-+	movw		r4, #0
-+	movw		r5, #254
- 	vmov.i32	q0, #1
- 	vshr.u64	q1, q0, #7
- 	vshr.u64	q0, q0, #8
- 	vmov.i32	d4, #19
- 	vmov.i32	d5, #38
--	add		r6, sp, #512
--	vst1.8		{d2-d3}, [r6, : 128]
--	add		r6, sp, #528
--	vst1.8		{d0-d1}, [r6, : 128]
--	add		r6, sp, #544
-+	add		r6, sp, #480
-+	vst1.8		{d2-d3}, [r6, : 128]!
-+	vst1.8		{d0-d1}, [r6, : 128]!
- 	vst1.8		{d4-d5}, [r6, : 128]
- 	add		r6, r3, #0
- 	vmov.i32	q2, #0
-@@ -45,12 +37,12 @@
- 	vst1.8		{d4-d5}, [r6, : 128]!
- 	vst1.8		d4, [r6, : 64]
- 	add		r6, r3, #0
--	ldr		r7, =960
-+	movw		r7, #960
- 	sub		r7, r7, #2
- 	neg		r7, r7
- 	sub		r7, r7, r7, LSL #7
- 	str		r7, [r6]
--	add		r6, sp, #704
-+	add		r6, sp, #672
- 	vld1.8		{d4-d5}, [r1]!
- 	vld1.8		{d6-d7}, [r1]
- 	vst1.8		{d4-d5}, [r6, : 128]!
-@@ -212,15 +204,15 @@
- 	vst1.8		{d0-d1}, [r6, : 128]!
- 	vst1.8		{d2-d3}, [r6, : 128]!
- 	vst1.8		d4, [r6, : 64]
--._mainloop:
-+.Lmainloop:
- 	mov		r2, r5, LSR #3
- 	and		r6, r5, #7
- 	ldrb		r2, [r1, r2]
- 	mov		r2, r2, LSR r6
- 	and		r2, r2, #1
--	str		r5, [sp, #488]
-+	str		r5, [sp, #456]
- 	eor		r4, r4, r2
--	str		r2, [sp, #492]
-+	str		r2, [sp, #460]
- 	neg		r2, r4
- 	add		r4, r3, #96
- 	add		r5, r3, #192
-@@ -291,7 +283,7 @@
- 	vsub.i32	q0, q1, q3
- 	vst1.8		d4, [r4, : 64]
- 	vst1.8		d0, [r6, : 64]
--	add		r2, sp, #544
-+	add		r2, sp, #512
- 	add		r4, r3, #96
- 	add		r5, r3, #144
- 	vld1.8		{d0-d1}, [r2, : 128]
-@@ -361,14 +353,13 @@
- 	vmlal.s32	q0, d12, d8
- 	vmlal.s32	q0, d13, d17
- 	vmlal.s32	q0, d6, d6
--	add		r2, sp, #512
--	vld1.8		{d18-d19}, [r2, : 128]
-+	add		r2, sp, #480
-+	vld1.8		{d18-d19}, [r2, : 128]!
- 	vmull.s32	q3, d16, d7
- 	vmlal.s32	q3, d10, d15
- 	vmlal.s32	q3, d11, d14
- 	vmlal.s32	q3, d12, d9
- 	vmlal.s32	q3, d13, d8
--	add		r2, sp, #528
- 	vld1.8		{d8-d9}, [r2, : 128]
- 	vadd.i64	q5, q12, q9
- 	vadd.i64	q6, q15, q9
-@@ -502,22 +493,19 @@
- 	vadd.i32	q5, q5, q0
- 	vtrn.32		q11, q14
- 	vadd.i32	q6, q6, q3
--	add		r2, sp, #560
-+	add		r2, sp, #528
- 	vadd.i32	q10, q10, q2
- 	vtrn.32		d24, d25
--	vst1.8		{d12-d13}, [r2, : 128]
-+	vst1.8		{d12-d13}, [r2, : 128]!
- 	vshl.i32	q6, q13, #1
--	add		r2, sp, #576
--	vst1.8		{d20-d21}, [r2, : 128]
-+	vst1.8		{d20-d21}, [r2, : 128]!
- 	vshl.i32	q10, q14, #1
--	add		r2, sp, #592
--	vst1.8		{d12-d13}, [r2, : 128]
-+	vst1.8		{d12-d13}, [r2, : 128]!
- 	vshl.i32	q15, q12, #1
- 	vadd.i32	q8, q8, q4
- 	vext.32		d10, d31, d30, #0
- 	vadd.i32	q7, q7, q1
--	add		r2, sp, #608
--	vst1.8		{d16-d17}, [r2, : 128]
-+	vst1.8		{d16-d17}, [r2, : 128]!
- 	vmull.s32	q8, d18, d5
- 	vmlal.s32	q8, d26, d4
- 	vmlal.s32	q8, d19, d9
-@@ -528,8 +516,7 @@
- 	vmlal.s32	q8, d29, d1
- 	vmlal.s32	q8, d24, d6
- 	vmlal.s32	q8, d25, d0
--	add		r2, sp, #624
--	vst1.8		{d14-d15}, [r2, : 128]
-+	vst1.8		{d14-d15}, [r2, : 128]!
- 	vmull.s32	q2, d18, d4
- 	vmlal.s32	q2, d12, d9
- 	vmlal.s32	q2, d13, d8
-@@ -537,8 +524,7 @@
- 	vmlal.s32	q2, d22, d2
- 	vmlal.s32	q2, d23, d1
- 	vmlal.s32	q2, d24, d0
--	add		r2, sp, #640
--	vst1.8		{d20-d21}, [r2, : 128]
-+	vst1.8		{d20-d21}, [r2, : 128]!
- 	vmull.s32	q7, d18, d9
- 	vmlal.s32	q7, d26, d3
- 	vmlal.s32	q7, d19, d8
-@@ -547,14 +533,12 @@
- 	vmlal.s32	q7, d28, d1
- 	vmlal.s32	q7, d23, d6
- 	vmlal.s32	q7, d29, d0
--	add		r2, sp, #656
--	vst1.8		{d10-d11}, [r2, : 128]
-+	vst1.8		{d10-d11}, [r2, : 128]!
- 	vmull.s32	q5, d18, d3
- 	vmlal.s32	q5, d19, d2
- 	vmlal.s32	q5, d22, d1
- 	vmlal.s32	q5, d23, d0
- 	vmlal.s32	q5, d12, d8
--	add		r2, sp, #672
- 	vst1.8		{d16-d17}, [r2, : 128]
- 	vmull.s32	q4, d18, d8
- 	vmlal.s32	q4, d26, d2
-@@ -566,7 +550,7 @@
- 	vmlal.s32	q8, d26, d1
- 	vmlal.s32	q8, d19, d6
- 	vmlal.s32	q8, d27, d0
--	add		r2, sp, #576
-+	add		r2, sp, #544
- 	vld1.8		{d20-d21}, [r2, : 128]
- 	vmlal.s32	q7, d24, d21
- 	vmlal.s32	q7, d25, d20
-@@ -575,32 +559,30 @@
- 	vmlal.s32	q8, d22, d21
- 	vmlal.s32	q8, d28, d20
- 	vmlal.s32	q5, d24, d20
--	add		r2, sp, #576
- 	vst1.8		{d14-d15}, [r2, : 128]
- 	vmull.s32	q7, d18, d6
- 	vmlal.s32	q7, d26, d0
--	add		r2, sp, #656
-+	add		r2, sp, #624
- 	vld1.8		{d30-d31}, [r2, : 128]
- 	vmlal.s32	q2, d30, d21
- 	vmlal.s32	q7, d19, d21
- 	vmlal.s32	q7, d27, d20
--	add		r2, sp, #624
-+	add		r2, sp, #592
- 	vld1.8		{d26-d27}, [r2, : 128]
- 	vmlal.s32	q4, d25, d27
- 	vmlal.s32	q8, d29, d27
- 	vmlal.s32	q8, d25, d26
- 	vmlal.s32	q7, d28, d27
- 	vmlal.s32	q7, d29, d26
--	add		r2, sp, #608
-+	add		r2, sp, #576
- 	vld1.8		{d28-d29}, [r2, : 128]
- 	vmlal.s32	q4, d24, d29
- 	vmlal.s32	q8, d23, d29
- 	vmlal.s32	q8, d24, d28
- 	vmlal.s32	q7, d22, d29
- 	vmlal.s32	q7, d23, d28
--	add		r2, sp, #608
- 	vst1.8		{d8-d9}, [r2, : 128]
--	add		r2, sp, #560
-+	add		r2, sp, #528
- 	vld1.8		{d8-d9}, [r2, : 128]
- 	vmlal.s32	q7, d24, d9
- 	vmlal.s32	q7, d25, d31
-@@ -621,36 +603,36 @@
- 	vmlal.s32	q0, d23, d26
- 	vmlal.s32	q0, d24, d31
- 	vmlal.s32	q0, d19, d20
--	add		r2, sp, #640
-+	add		r2, sp, #608
- 	vld1.8		{d18-d19}, [r2, : 128]
- 	vmlal.s32	q2, d18, d7
--	vmlal.s32	q2, d19, d6
- 	vmlal.s32	q5, d18, d6
--	vmlal.s32	q5, d19, d21
- 	vmlal.s32	q1, d18, d21
--	vmlal.s32	q1, d19, d29
- 	vmlal.s32	q0, d18, d28
--	vmlal.s32	q0, d19, d9
- 	vmlal.s32	q6, d18, d29
-+	vmlal.s32	q2, d19, d6
-+	vmlal.s32	q5, d19, d21
-+	vmlal.s32	q1, d19, d29
-+	vmlal.s32	q0, d19, d9
- 	vmlal.s32	q6, d19, d28
--	add		r2, sp, #592
-+	add		r2, sp, #560
- 	vld1.8		{d18-d19}, [r2, : 128]
--	add		r2, sp, #512
-+	add		r2, sp, #480
- 	vld1.8		{d22-d23}, [r2, : 128]
- 	vmlal.s32	q5, d19, d7
- 	vmlal.s32	q0, d18, d21
- 	vmlal.s32	q0, d19, d29
- 	vmlal.s32	q6, d18, d6
--	add		r2, sp, #528
-+	add		r2, sp, #496
- 	vld1.8		{d6-d7}, [r2, : 128]
- 	vmlal.s32	q6, d19, d21
--	add		r2, sp, #576
-+	add		r2, sp, #544
- 	vld1.8		{d18-d19}, [r2, : 128]
- 	vmlal.s32	q0, d30, d8
--	add		r2, sp, #672
-+	add		r2, sp, #640
- 	vld1.8		{d20-d21}, [r2, : 128]
- 	vmlal.s32	q5, d30, d29
--	add		r2, sp, #608
-+	add		r2, sp, #576
- 	vld1.8		{d24-d25}, [r2, : 128]
- 	vmlal.s32	q1, d30, d28
- 	vadd.i64	q13, q0, q11
-@@ -823,22 +805,19 @@
- 	vadd.i32	q5, q5, q0
- 	vtrn.32		q11, q14
- 	vadd.i32	q6, q6, q3
--	add		r2, sp, #560
-+	add		r2, sp, #528
- 	vadd.i32	q10, q10, q2
- 	vtrn.32		d24, d25
--	vst1.8		{d12-d13}, [r2, : 128]
-+	vst1.8		{d12-d13}, [r2, : 128]!
- 	vshl.i32	q6, q13, #1
--	add		r2, sp, #576
--	vst1.8		{d20-d21}, [r2, : 128]
-+	vst1.8		{d20-d21}, [r2, : 128]!
- 	vshl.i32	q10, q14, #1
--	add		r2, sp, #592
--	vst1.8		{d12-d13}, [r2, : 128]
-+	vst1.8		{d12-d13}, [r2, : 128]!
- 	vshl.i32	q15, q12, #1
- 	vadd.i32	q8, q8, q4
- 	vext.32		d10, d31, d30, #0
- 	vadd.i32	q7, q7, q1
--	add		r2, sp, #608
--	vst1.8		{d16-d17}, [r2, : 128]
-+	vst1.8		{d16-d17}, [r2, : 128]!
- 	vmull.s32	q8, d18, d5
- 	vmlal.s32	q8, d26, d4
- 	vmlal.s32	q8, d19, d9
-@@ -849,8 +828,7 @@
- 	vmlal.s32	q8, d29, d1
- 	vmlal.s32	q8, d24, d6
- 	vmlal.s32	q8, d25, d0
--	add		r2, sp, #624
--	vst1.8		{d14-d15}, [r2, : 128]
-+	vst1.8		{d14-d15}, [r2, : 128]!
- 	vmull.s32	q2, d18, d4
- 	vmlal.s32	q2, d12, d9
- 	vmlal.s32	q2, d13, d8
-@@ -858,8 +836,7 @@
- 	vmlal.s32	q2, d22, d2
- 	vmlal.s32	q2, d23, d1
- 	vmlal.s32	q2, d24, d0
--	add		r2, sp, #640
--	vst1.8		{d20-d21}, [r2, : 128]
-+	vst1.8		{d20-d21}, [r2, : 128]!
- 	vmull.s32	q7, d18, d9
- 	vmlal.s32	q7, d26, d3
- 	vmlal.s32	q7, d19, d8
-@@ -868,15 +845,13 @@
- 	vmlal.s32	q7, d28, d1
- 	vmlal.s32	q7, d23, d6
- 	vmlal.s32	q7, d29, d0
--	add		r2, sp, #656
--	vst1.8		{d10-d11}, [r2, : 128]
-+	vst1.8		{d10-d11}, [r2, : 128]!
- 	vmull.s32	q5, d18, d3
- 	vmlal.s32	q5, d19, d2
- 	vmlal.s32	q5, d22, d1
- 	vmlal.s32	q5, d23, d0
- 	vmlal.s32	q5, d12, d8
--	add		r2, sp, #672
--	vst1.8		{d16-d17}, [r2, : 128]
-+	vst1.8		{d16-d17}, [r2, : 128]!
- 	vmull.s32	q4, d18, d8
- 	vmlal.s32	q4, d26, d2
- 	vmlal.s32	q4, d19, d7
-@@ -887,7 +862,7 @@
- 	vmlal.s32	q8, d26, d1
- 	vmlal.s32	q8, d19, d6
- 	vmlal.s32	q8, d27, d0
--	add		r2, sp, #576
-+	add		r2, sp, #544
- 	vld1.8		{d20-d21}, [r2, : 128]
- 	vmlal.s32	q7, d24, d21
- 	vmlal.s32	q7, d25, d20
-@@ -896,32 +871,30 @@
- 	vmlal.s32	q8, d22, d21
- 	vmlal.s32	q8, d28, d20
- 	vmlal.s32	q5, d24, d20
--	add		r2, sp, #576
- 	vst1.8		{d14-d15}, [r2, : 128]
- 	vmull.s32	q7, d18, d6
- 	vmlal.s32	q7, d26, d0
--	add		r2, sp, #656
-+	add		r2, sp, #624
- 	vld1.8		{d30-d31}, [r2, : 128]
- 	vmlal.s32	q2, d30, d21
- 	vmlal.s32	q7, d19, d21
- 	vmlal.s32	q7, d27, d20
--	add		r2, sp, #624
-+	add		r2, sp, #592
- 	vld1.8		{d26-d27}, [r2, : 128]
- 	vmlal.s32	q4, d25, d27
- 	vmlal.s32	q8, d29, d27
- 	vmlal.s32	q8, d25, d26
- 	vmlal.s32	q7, d28, d27
- 	vmlal.s32	q7, d29, d26
--	add		r2, sp, #608
-+	add		r2, sp, #576
- 	vld1.8		{d28-d29}, [r2, : 128]
- 	vmlal.s32	q4, d24, d29
- 	vmlal.s32	q8, d23, d29
- 	vmlal.s32	q8, d24, d28
- 	vmlal.s32	q7, d22, d29
- 	vmlal.s32	q7, d23, d28
--	add		r2, sp, #608
- 	vst1.8		{d8-d9}, [r2, : 128]
--	add		r2, sp, #560
-+	add		r2, sp, #528
- 	vld1.8		{d8-d9}, [r2, : 128]
- 	vmlal.s32	q7, d24, d9
- 	vmlal.s32	q7, d25, d31
-@@ -942,36 +915,36 @@
- 	vmlal.s32	q0, d23, d26
- 	vmlal.s32	q0, d24, d31
- 	vmlal.s32	q0, d19, d20
--	add		r2, sp, #640
-+	add		r2, sp, #608
- 	vld1.8		{d18-d19}, [r2, : 128]
- 	vmlal.s32	q2, d18, d7
--	vmlal.s32	q2, d19, d6
- 	vmlal.s32	q5, d18, d6
--	vmlal.s32	q5, d19, d21
- 	vmlal.s32	q1, d18, d21
--	vmlal.s32	q1, d19, d29
- 	vmlal.s32	q0, d18, d28
--	vmlal.s32	q0, d19, d9
- 	vmlal.s32	q6, d18, d29
-+	vmlal.s32	q2, d19, d6
-+	vmlal.s32	q5, d19, d21
-+	vmlal.s32	q1, d19, d29
-+	vmlal.s32	q0, d19, d9
- 	vmlal.s32	q6, d19, d28
--	add		r2, sp, #592
-+	add		r2, sp, #560
- 	vld1.8		{d18-d19}, [r2, : 128]
--	add		r2, sp, #512
-+	add		r2, sp, #480
- 	vld1.8		{d22-d23}, [r2, : 128]
- 	vmlal.s32	q5, d19, d7
- 	vmlal.s32	q0, d18, d21
- 	vmlal.s32	q0, d19, d29
- 	vmlal.s32	q6, d18, d6
--	add		r2, sp, #528
-+	add		r2, sp, #496
- 	vld1.8		{d6-d7}, [r2, : 128]
- 	vmlal.s32	q6, d19, d21
--	add		r2, sp, #576
-+	add		r2, sp, #544
- 	vld1.8		{d18-d19}, [r2, : 128]
- 	vmlal.s32	q0, d30, d8
--	add		r2, sp, #672
-+	add		r2, sp, #640
- 	vld1.8		{d20-d21}, [r2, : 128]
- 	vmlal.s32	q5, d30, d29
--	add		r2, sp, #608
-+	add		r2, sp, #576
- 	vld1.8		{d24-d25}, [r2, : 128]
- 	vmlal.s32	q1, d30, d28
- 	vadd.i64	q13, q0, q11
-@@ -1069,7 +1042,7 @@
- 	sub		r4, r4, #24
- 	vst1.8		d0, [r2, : 64]
- 	vst1.8		d1, [r4, : 64]
--	add		r2, sp, #544
-+	add		r2, sp, #512
- 	add		r4, r3, #144
- 	add		r5, r3, #192
- 	vld1.8		{d0-d1}, [r2, : 128]
-@@ -1139,14 +1112,13 @@
- 	vmlal.s32	q0, d12, d8
- 	vmlal.s32	q0, d13, d17
- 	vmlal.s32	q0, d6, d6
--	add		r2, sp, #512
--	vld1.8		{d18-d19}, [r2, : 128]
-+	add		r2, sp, #480
-+	vld1.8		{d18-d19}, [r2, : 128]!
- 	vmull.s32	q3, d16, d7
- 	vmlal.s32	q3, d10, d15
- 	vmlal.s32	q3, d11, d14
- 	vmlal.s32	q3, d12, d9
- 	vmlal.s32	q3, d13, d8
--	add		r2, sp, #528
- 	vld1.8		{d8-d9}, [r2, : 128]
- 	vadd.i64	q5, q12, q9
- 	vadd.i64	q6, q15, q9
-@@ -1295,22 +1267,19 @@
- 	vadd.i32	q5, q5, q0
- 	vtrn.32		q11, q14
- 	vadd.i32	q6, q6, q3
--	add		r2, sp, #560
-+	add		r2, sp, #528
- 	vadd.i32	q10, q10, q2
- 	vtrn.32		d24, d25
--	vst1.8		{d12-d13}, [r2, : 128]
-+	vst1.8		{d12-d13}, [r2, : 128]!
- 	vshl.i32	q6, q13, #1
--	add		r2, sp, #576
--	vst1.8		{d20-d21}, [r2, : 128]
-+	vst1.8		{d20-d21}, [r2, : 128]!
- 	vshl.i32	q10, q14, #1
--	add		r2, sp, #592
--	vst1.8		{d12-d13}, [r2, : 128]
-+	vst1.8		{d12-d13}, [r2, : 128]!
- 	vshl.i32	q15, q12, #1
- 	vadd.i32	q8, q8, q4
- 	vext.32		d10, d31, d30, #0
- 	vadd.i32	q7, q7, q1
--	add		r2, sp, #608
--	vst1.8		{d16-d17}, [r2, : 128]
-+	vst1.8		{d16-d17}, [r2, : 128]!
- 	vmull.s32	q8, d18, d5
- 	vmlal.s32	q8, d26, d4
- 	vmlal.s32	q8, d19, d9
-@@ -1321,8 +1290,7 @@
- 	vmlal.s32	q8, d29, d1
- 	vmlal.s32	q8, d24, d6
- 	vmlal.s32	q8, d25, d0
--	add		r2, sp, #624
--	vst1.8		{d14-d15}, [r2, : 128]
-+	vst1.8		{d14-d15}, [r2, : 128]!
- 	vmull.s32	q2, d18, d4
- 	vmlal.s32	q2, d12, d9
- 	vmlal.s32	q2, d13, d8
-@@ -1330,8 +1298,7 @@
- 	vmlal.s32	q2, d22, d2
- 	vmlal.s32	q2, d23, d1
- 	vmlal.s32	q2, d24, d0
--	add		r2, sp, #640
--	vst1.8		{d20-d21}, [r2, : 128]
-+	vst1.8		{d20-d21}, [r2, : 128]!
- 	vmull.s32	q7, d18, d9
- 	vmlal.s32	q7, d26, d3
- 	vmlal.s32	q7, d19, d8
-@@ -1340,15 +1307,13 @@
- 	vmlal.s32	q7, d28, d1
- 	vmlal.s32	q7, d23, d6
- 	vmlal.s32	q7, d29, d0
--	add		r2, sp, #656
--	vst1.8		{d10-d11}, [r2, : 128]
-+	vst1.8		{d10-d11}, [r2, : 128]!
- 	vmull.s32	q5, d18, d3
- 	vmlal.s32	q5, d19, d2
- 	vmlal.s32	q5, d22, d1
- 	vmlal.s32	q5, d23, d0
- 	vmlal.s32	q5, d12, d8
--	add		r2, sp, #672
--	vst1.8		{d16-d17}, [r2, : 128]
-+	vst1.8		{d16-d17}, [r2, : 128]!
- 	vmull.s32	q4, d18, d8
- 	vmlal.s32	q4, d26, d2
- 	vmlal.s32	q4, d19, d7
-@@ -1359,7 +1324,7 @@
- 	vmlal.s32	q8, d26, d1
- 	vmlal.s32	q8, d19, d6
- 	vmlal.s32	q8, d27, d0
--	add		r2, sp, #576
-+	add		r2, sp, #544
- 	vld1.8		{d20-d21}, [r2, : 128]
- 	vmlal.s32	q7, d24, d21
- 	vmlal.s32	q7, d25, d20
-@@ -1368,32 +1333,30 @@
- 	vmlal.s32	q8, d22, d21
- 	vmlal.s32	q8, d28, d20
- 	vmlal.s32	q5, d24, d20
--	add		r2, sp, #576
- 	vst1.8		{d14-d15}, [r2, : 128]
- 	vmull.s32	q7, d18, d6
- 	vmlal.s32	q7, d26, d0
--	add		r2, sp, #656
-+	add		r2, sp, #624
- 	vld1.8		{d30-d31}, [r2, : 128]
- 	vmlal.s32	q2, d30, d21
- 	vmlal.s32	q7, d19, d21
- 	vmlal.s32	q7, d27, d20
--	add		r2, sp, #624
-+	add		r2, sp, #592
- 	vld1.8		{d26-d27}, [r2, : 128]
- 	vmlal.s32	q4, d25, d27
- 	vmlal.s32	q8, d29, d27
- 	vmlal.s32	q8, d25, d26
- 	vmlal.s32	q7, d28, d27
- 	vmlal.s32	q7, d29, d26
--	add		r2, sp, #608
-+	add		r2, sp, #576
- 	vld1.8		{d28-d29}, [r2, : 128]
- 	vmlal.s32	q4, d24, d29
- 	vmlal.s32	q8, d23, d29
- 	vmlal.s32	q8, d24, d28
- 	vmlal.s32	q7, d22, d29
- 	vmlal.s32	q7, d23, d28
--	add		r2, sp, #608
- 	vst1.8		{d8-d9}, [r2, : 128]
--	add		r2, sp, #560
-+	add		r2, sp, #528
- 	vld1.8		{d8-d9}, [r2, : 128]
- 	vmlal.s32	q7, d24, d9
- 	vmlal.s32	q7, d25, d31
-@@ -1414,36 +1377,36 @@
- 	vmlal.s32	q0, d23, d26
- 	vmlal.s32	q0, d24, d31
- 	vmlal.s32	q0, d19, d20
--	add		r2, sp, #640
-+	add		r2, sp, #608
- 	vld1.8		{d18-d19}, [r2, : 128]
- 	vmlal.s32	q2, d18, d7
--	vmlal.s32	q2, d19, d6
- 	vmlal.s32	q5, d18, d6
--	vmlal.s32	q5, d19, d21
- 	vmlal.s32	q1, d18, d21
--	vmlal.s32	q1, d19, d29
- 	vmlal.s32	q0, d18, d28
--	vmlal.s32	q0, d19, d9
- 	vmlal.s32	q6, d18, d29
-+	vmlal.s32	q2, d19, d6
-+	vmlal.s32	q5, d19, d21
-+	vmlal.s32	q1, d19, d29
-+	vmlal.s32	q0, d19, d9
- 	vmlal.s32	q6, d19, d28
--	add		r2, sp, #592
-+	add		r2, sp, #560
- 	vld1.8		{d18-d19}, [r2, : 128]
--	add		r2, sp, #512
-+	add		r2, sp, #480
- 	vld1.8		{d22-d23}, [r2, : 128]
- 	vmlal.s32	q5, d19, d7
- 	vmlal.s32	q0, d18, d21
- 	vmlal.s32	q0, d19, d29
- 	vmlal.s32	q6, d18, d6
--	add		r2, sp, #528
-+	add		r2, sp, #496
- 	vld1.8		{d6-d7}, [r2, : 128]
- 	vmlal.s32	q6, d19, d21
--	add		r2, sp, #576
-+	add		r2, sp, #544
- 	vld1.8		{d18-d19}, [r2, : 128]
- 	vmlal.s32	q0, d30, d8
--	add		r2, sp, #672
-+	add		r2, sp, #640
- 	vld1.8		{d20-d21}, [r2, : 128]
- 	vmlal.s32	q5, d30, d29
--	add		r2, sp, #608
-+	add		r2, sp, #576
- 	vld1.8		{d24-d25}, [r2, : 128]
- 	vmlal.s32	q1, d30, d28
- 	vadd.i64	q13, q0, q11
-@@ -1541,10 +1504,10 @@
- 	sub		r4, r4, #24
- 	vst1.8		d0, [r2, : 64]
- 	vst1.8		d1, [r4, : 64]
--	ldr		r2, [sp, #488]
--	ldr		r4, [sp, #492]
-+	ldr		r2, [sp, #456]
-+	ldr		r4, [sp, #460]
- 	subs		r5, r2, #1
--	bge		._mainloop
-+	bge		.Lmainloop
- 	add		r1, r3, #144
- 	add		r2, r3, #336
- 	vld1.8		{d0-d1}, [r1, : 128]!
-@@ -1553,41 +1516,41 @@
- 	vst1.8		{d0-d1}, [r2, : 128]!
- 	vst1.8		{d2-d3}, [r2, : 128]!
- 	vst1.8		d4, [r2, : 64]
--	ldr		r1, =0
--._invertloop:
-+	movw		r1, #0
-+.Linvertloop:
- 	add		r2, r3, #144
--	ldr		r4, =0
--	ldr		r5, =2
-+	movw		r4, #0
-+	movw		r5, #2
- 	cmp		r1, #1
--	ldreq		r5, =1
-+	moveq		r5, #1
- 	addeq		r2, r3, #336
- 	addeq		r4, r3, #48
- 	cmp		r1, #2
--	ldreq		r5, =1
-+	moveq		r5, #1
- 	addeq		r2, r3, #48
- 	cmp		r1, #3
--	ldreq		r5, =5
-+	moveq		r5, #5
- 	addeq		r4, r3, #336
- 	cmp		r1, #4
--	ldreq		r5, =10
-+	moveq		r5, #10
- 	cmp		r1, #5
--	ldreq		r5, =20
-+	moveq		r5, #20
- 	cmp		r1, #6
--	ldreq		r5, =10
-+	moveq		r5, #10
- 	addeq		r2, r3, #336
- 	addeq		r4, r3, #336
- 	cmp		r1, #7
--	ldreq		r5, =50
-+	moveq		r5, #50
- 	cmp		r1, #8
--	ldreq		r5, =100
-+	moveq		r5, #100
- 	cmp		r1, #9
--	ldreq		r5, =50
-+	moveq		r5, #50
- 	addeq		r2, r3, #336
- 	cmp		r1, #10
--	ldreq		r5, =5
-+	moveq		r5, #5
- 	addeq		r2, r3, #48
- 	cmp		r1, #11
--	ldreq		r5, =0
-+	moveq		r5, #0
- 	addeq		r2, r3, #96
- 	add		r6, r3, #144
- 	add		r7, r3, #288
-@@ -1598,8 +1561,8 @@
- 	vst1.8		{d2-d3}, [r7, : 128]!
- 	vst1.8		d4, [r7, : 64]
- 	cmp		r5, #0
--	beq		._skipsquaringloop
--._squaringloop:
-+	beq		.Lskipsquaringloop
-+.Lsquaringloop:
- 	add		r6, r3, #288
- 	add		r7, r3, #288
- 	add		r8, r3, #288
-@@ -1611,7 +1574,7 @@
- 	vld1.8		{d6-d7}, [r7, : 128]!
- 	vld1.8		{d9}, [r7, : 64]
- 	vld1.8		{d10-d11}, [r6, : 128]!
--	add		r7, sp, #416
-+	add		r7, sp, #384
- 	vld1.8		{d12-d13}, [r6, : 128]!
- 	vmul.i32	q7, q2, q0
- 	vld1.8		{d8}, [r6, : 64]
-@@ -1726,7 +1689,7 @@
- 	vext.32		d10, d6, d6, #0
- 	vmov.i32	q1, #0xffffffff
- 	vshl.i64	q4, q1, #25
--	add		r7, sp, #512
-+	add		r7, sp, #480
- 	vld1.8		{d14-d15}, [r7, : 128]
- 	vadd.i64	q9, q2, q7
- 	vshl.i64	q1, q1, #26
-@@ -1735,7 +1698,7 @@
- 	vadd.i64	q5, q5, q10
- 	vand		q9, q9, q1
- 	vld1.8		{d16}, [r6, : 64]!
--	add		r6, sp, #528
-+	add		r6, sp, #496
- 	vld1.8		{d20-d21}, [r6, : 128]
- 	vadd.i64	q11, q5, q10
- 	vsub.i64	q2, q2, q9
-@@ -1789,8 +1752,8 @@
- 	sub		r6, r6, #32
- 	vst1.8		d4, [r6, : 64]
- 	subs		r5, r5, #1
--	bhi		._squaringloop
--._skipsquaringloop:
-+	bhi		.Lsquaringloop
-+.Lskipsquaringloop:
- 	mov		r2, r2
- 	add		r5, r3, #288
- 	add		r6, r3, #144
-@@ -1802,7 +1765,7 @@
- 	vld1.8		{d6-d7}, [r5, : 128]!
- 	vld1.8		{d9}, [r5, : 64]
- 	vld1.8		{d10-d11}, [r2, : 128]!
--	add		r5, sp, #416
-+	add		r5, sp, #384
- 	vld1.8		{d12-d13}, [r2, : 128]!
- 	vmul.i32	q7, q2, q0
- 	vld1.8		{d8}, [r2, : 64]
-@@ -1917,7 +1880,7 @@
- 	vext.32		d10, d6, d6, #0
- 	vmov.i32	q1, #0xffffffff
- 	vshl.i64	q4, q1, #25
--	add		r5, sp, #512
-+	add		r5, sp, #480
- 	vld1.8		{d14-d15}, [r5, : 128]
- 	vadd.i64	q9, q2, q7
- 	vshl.i64	q1, q1, #26
-@@ -1926,7 +1889,7 @@
- 	vadd.i64	q5, q5, q10
- 	vand		q9, q9, q1
- 	vld1.8		{d16}, [r2, : 64]!
--	add		r2, sp, #528
-+	add		r2, sp, #496
- 	vld1.8		{d20-d21}, [r2, : 128]
- 	vadd.i64	q11, q5, q10
- 	vsub.i64	q2, q2, q9
-@@ -1980,7 +1943,7 @@
- 	sub		r2, r2, #32
- 	vst1.8		d4, [r2, : 64]
- 	cmp		r4, #0
--	beq		._skippostcopy
-+	beq		.Lskippostcopy
- 	add		r2, r3, #144
- 	mov		r4, r4
- 	vld1.8		{d0-d1}, [r2, : 128]!
-@@ -1989,9 +1952,9 @@
- 	vst1.8		{d0-d1}, [r4, : 128]!
- 	vst1.8		{d2-d3}, [r4, : 128]!
- 	vst1.8		d4, [r4, : 64]
--._skippostcopy:
-+.Lskippostcopy:
- 	cmp		r1, #1
--	bne		._skipfinalcopy
-+	bne		.Lskipfinalcopy
- 	add		r2, r3, #288
- 	add		r4, r3, #144
- 	vld1.8		{d0-d1}, [r2, : 128]!
-@@ -2000,10 +1963,10 @@
- 	vst1.8		{d0-d1}, [r4, : 128]!
- 	vst1.8		{d2-d3}, [r4, : 128]!
- 	vst1.8		d4, [r4, : 64]
--._skipfinalcopy:
-+.Lskipfinalcopy:
- 	add		r1, r1, #1
- 	cmp		r1, #12
--	blo		._invertloop
-+	blo		.Linvertloop
- 	add		r1, r3, #144
- 	ldr		r2, [r1], #4
- 	ldr		r3, [r1], #4
-@@ -2085,21 +2048,15 @@
- 	add		r8, r8, r10, LSL #12
- 	mov		r9, r10, LSR #20
- 	add		r1, r9, r1, LSL #6
--	str		r2, [r0], #4
--	str		r3, [r0], #4
--	str		r4, [r0], #4
--	str		r5, [r0], #4
--	str		r6, [r0], #4
--	str		r7, [r0], #4
--	str		r8, [r0], #4
--	str		r1, [r0]
--	ldrd		r4, [sp, #0]
--	ldrd		r6, [sp, #8]
--	ldrd		r8, [sp, #16]
--	ldrd		r10, [sp, #24]
--	ldr		r12, [sp, #480]
--	ldr		r14, [sp, #484]
--	ldr		r0, =0
--	mov		sp, r12
--	vpop		{q4, q5, q6, q7}
--	bx		lr
-+	str		r2, [r0]
-+	str		r3, [r0, #4]
-+	str		r4, [r0, #8]
-+	str		r5, [r0, #12]
-+	str		r6, [r0, #16]
-+	str		r7, [r0, #20]
-+	str		r8, [r0, #24]
-+	str		r1, [r0, #28]
-+	movw		r0, #0
-+	mov		sp, ip
-+	pop		{r4-r11, pc}
-+ENDPROC(curve25519_neon)
---- /dev/null
-+++ b/arch/arm/crypto/curve25519-glue.c
-@@ -0,0 +1,127 @@
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ *
-+ * Based on public domain code from Daniel J. Bernstein and Peter Schwabe. This
-+ * began from SUPERCOP's curve25519/neon2/scalarmult.s, but has subsequently been
-+ * manually reworked for use in kernel space.
-+ */
-+
-+#include <asm/hwcap.h>
-+#include <asm/neon.h>
-+#include <asm/simd.h>
-+#include <crypto/internal/kpp.h>
-+#include <crypto/internal/simd.h>
-+#include <linux/types.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/jump_label.h>
-+#include <crypto/curve25519.h>
-+
-+asmlinkage void curve25519_neon(u8 mypublic[CURVE25519_KEY_SIZE],
-+				const u8 secret[CURVE25519_KEY_SIZE],
-+				const u8 basepoint[CURVE25519_KEY_SIZE]);
-+
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-+
-+void curve25519_arch(u8 out[CURVE25519_KEY_SIZE],
-+		     const u8 scalar[CURVE25519_KEY_SIZE],
-+		     const u8 point[CURVE25519_KEY_SIZE])
-+{
-+	if (static_branch_likely(&have_neon) && crypto_simd_usable()) {
-+		kernel_neon_begin();
-+		curve25519_neon(out, scalar, point);
-+		kernel_neon_end();
-+	} else {
-+		curve25519_generic(out, scalar, point);
-+	}
-+}
-+EXPORT_SYMBOL(curve25519_arch);
-+
-+static int curve25519_set_secret(struct crypto_kpp *tfm, const void *buf,
-+				 unsigned int len)
-+{
-+	u8 *secret = kpp_tfm_ctx(tfm);
-+
-+	if (!len)
-+		curve25519_generate_secret(secret);
-+	else if (len == CURVE25519_KEY_SIZE &&
-+		 crypto_memneq(buf, curve25519_null_point, CURVE25519_KEY_SIZE))
-+		memcpy(secret, buf, CURVE25519_KEY_SIZE);
-+	else
-+		return -EINVAL;
-+	return 0;
-+}
-+
-+static int curve25519_compute_value(struct kpp_request *req)
-+{
-+	struct crypto_kpp *tfm = crypto_kpp_reqtfm(req);
-+	const u8 *secret = kpp_tfm_ctx(tfm);
-+	u8 public_key[CURVE25519_KEY_SIZE];
-+	u8 buf[CURVE25519_KEY_SIZE];
-+	int copied, nbytes;
-+	u8 const *bp;
-+
-+	if (req->src) {
-+		copied = sg_copy_to_buffer(req->src,
-+					   sg_nents_for_len(req->src,
-+							    CURVE25519_KEY_SIZE),
-+					   public_key, CURVE25519_KEY_SIZE);
-+		if (copied != CURVE25519_KEY_SIZE)
-+			return -EINVAL;
-+		bp = public_key;
-+	} else {
-+		bp = curve25519_base_point;
-+	}
-+
-+	curve25519_arch(buf, secret, bp);
-+
-+	/* might want less than we've got */
-+	nbytes = min_t(size_t, CURVE25519_KEY_SIZE, req->dst_len);
-+	copied = sg_copy_from_buffer(req->dst, sg_nents_for_len(req->dst,
-+								nbytes),
-+				     buf, nbytes);
-+	if (copied != nbytes)
-+		return -EINVAL;
-+	return 0;
-+}
-+
-+static unsigned int curve25519_max_size(struct crypto_kpp *tfm)
-+{
-+	return CURVE25519_KEY_SIZE;
-+}
-+
-+static struct kpp_alg curve25519_alg = {
-+	.base.cra_name		= "curve25519",
-+	.base.cra_driver_name	= "curve25519-neon",
-+	.base.cra_priority	= 200,
-+	.base.cra_module	= THIS_MODULE,
-+	.base.cra_ctxsize	= CURVE25519_KEY_SIZE,
-+
-+	.set_secret		= curve25519_set_secret,
-+	.generate_public_key	= curve25519_compute_value,
-+	.compute_shared_secret	= curve25519_compute_value,
-+	.max_size		= curve25519_max_size,
-+};
-+
-+static int __init mod_init(void)
-+{
-+	if (elf_hwcap & HWCAP_NEON) {
-+		static_branch_enable(&have_neon);
-+		return crypto_register_kpp(&curve25519_alg);
-+	}
-+	return 0;
-+}
-+
-+static void __exit mod_exit(void)
-+{
-+	if (elf_hwcap & HWCAP_NEON)
-+		crypto_unregister_kpp(&curve25519_alg);
-+}
-+
-+module_init(mod_init);
-+module_exit(mod_exit);
-+
-+MODULE_ALIAS_CRYPTO("curve25519");
-+MODULE_ALIAS_CRYPTO("curve25519-neon");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0032-crypto-chacha20poly1305-import-construction-and-self.patch b/target/linux/generic/backport-5.4/080-wireguard-0032-crypto-chacha20poly1305-import-construction-and-self.patch
deleted file mode 100644
index 2d5601d7ac..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0032-crypto-chacha20poly1305-import-construction-and-self.patch
+++ /dev/null
@@ -1,7677 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:39 +0100
-Subject: [PATCH] crypto: chacha20poly1305 - import construction and selftest
- from Zinc
-
-commit ed20078b7e3331e82828be357147af6a3282e4ce upstream.
-
-This incorporates the chacha20poly1305 from the Zinc library, retaining
-the library interface, but replacing the implementation with calls into
-the code that already existed in the kernel's crypto API.
-
-Note that this library API does not implement RFC7539 fully, given that
-it is limited to 64-bit nonces. (The 96-bit nonce version that was part
-of the selftest only has been removed, along with the 96-bit nonce test
-vectors that only tested the selftest but not the actual library itself)
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- include/crypto/chacha20poly1305.h      |   37 +
- lib/crypto/Kconfig                     |    7 +
- lib/crypto/Makefile                    |    4 +
- lib/crypto/chacha20poly1305-selftest.c | 7348 ++++++++++++++++++++++++
- lib/crypto/chacha20poly1305.c          |  219 +
- 5 files changed, 7615 insertions(+)
- create mode 100644 include/crypto/chacha20poly1305.h
- create mode 100644 lib/crypto/chacha20poly1305-selftest.c
- create mode 100644 lib/crypto/chacha20poly1305.c
-
---- /dev/null
-+++ b/include/crypto/chacha20poly1305.h
-@@ -0,0 +1,37 @@
-+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifndef __CHACHA20POLY1305_H
-+#define __CHACHA20POLY1305_H
-+
-+#include <linux/types.h>
-+
-+enum chacha20poly1305_lengths {
-+	XCHACHA20POLY1305_NONCE_SIZE = 24,
-+	CHACHA20POLY1305_KEY_SIZE = 32,
-+	CHACHA20POLY1305_AUTHTAG_SIZE = 16
-+};
-+
-+void chacha20poly1305_encrypt(u8 *dst, const u8 *src, const size_t src_len,
-+			      const u8 *ad, const size_t ad_len,
-+			      const u64 nonce,
-+			      const u8 key[CHACHA20POLY1305_KEY_SIZE]);
-+
-+bool __must_check
-+chacha20poly1305_decrypt(u8 *dst, const u8 *src, const size_t src_len,
-+			 const u8 *ad, const size_t ad_len, const u64 nonce,
-+			 const u8 key[CHACHA20POLY1305_KEY_SIZE]);
-+
-+void xchacha20poly1305_encrypt(u8 *dst, const u8 *src, const size_t src_len,
-+			       const u8 *ad, const size_t ad_len,
-+			       const u8 nonce[XCHACHA20POLY1305_NONCE_SIZE],
-+			       const u8 key[CHACHA20POLY1305_KEY_SIZE]);
-+
-+bool __must_check xchacha20poly1305_decrypt(
-+	u8 *dst, const u8 *src, const size_t src_len, const u8 *ad,
-+	const size_t ad_len, const u8 nonce[XCHACHA20POLY1305_NONCE_SIZE],
-+	const u8 key[CHACHA20POLY1305_KEY_SIZE]);
-+
-+#endif /* __CHACHA20POLY1305_H */
---- a/lib/crypto/Kconfig
-+++ b/lib/crypto/Kconfig
-@@ -119,5 +119,12 @@ config CRYPTO_LIB_POLY1305
- 	  by either the generic implementation or an arch-specific one, if one
- 	  is available and enabled.
- 
-+config CRYPTO_LIB_CHACHA20POLY1305
-+	tristate "ChaCha20-Poly1305 AEAD support (8-byte nonce library version)"
-+	depends on CRYPTO_ARCH_HAVE_LIB_CHACHA || !CRYPTO_ARCH_HAVE_LIB_CHACHA
-+	depends on CRYPTO_ARCH_HAVE_LIB_POLY1305 || !CRYPTO_ARCH_HAVE_LIB_POLY1305
-+	select CRYPTO_LIB_CHACHA
-+	select CRYPTO_LIB_POLY1305
-+
- config CRYPTO_LIB_SHA256
- 	tristate
---- a/lib/crypto/Makefile
-+++ b/lib/crypto/Makefile
-@@ -16,6 +16,9 @@ libblake2s-generic-y				+= blake2s-gener
- obj-$(CONFIG_CRYPTO_LIB_BLAKE2S)		+= libblake2s.o
- libblake2s-y					+= blake2s.o
- 
-+obj-$(CONFIG_CRYPTO_LIB_CHACHA20POLY1305)	+= libchacha20poly1305.o
-+libchacha20poly1305-y				+= chacha20poly1305.o
-+
- obj-$(CONFIG_CRYPTO_LIB_CURVE25519_GENERIC)	+= libcurve25519.o
- libcurve25519-y					:= curve25519-fiat32.o
- libcurve25519-$(CONFIG_ARCH_SUPPORTS_INT128)	:= curve25519-hacl64.o
-@@ -32,4 +35,5 @@ libsha256-y					:= sha256.o
- 
- ifneq ($(CONFIG_CRYPTO_MANAGER_DISABLE_TESTS),y)
- libblake2s-y					+= blake2s-selftest.o
-+libchacha20poly1305-y				+= chacha20poly1305-selftest.o
- endif
---- /dev/null
-+++ b/lib/crypto/chacha20poly1305-selftest.c
-@@ -0,0 +1,7348 @@
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include <crypto/chacha20poly1305.h>
-+#include <crypto/poly1305.h>
-+
-+#include <asm/unaligned.h>
-+#include <linux/bug.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+
-+struct chacha20poly1305_testvec {
-+	const u8 *input, *output, *assoc, *nonce, *key;
-+	size_t ilen, alen, nlen;
-+	bool failure;
-+};
-+
-+/* The first of these are the ChaCha20-Poly1305 AEAD test vectors from RFC7539
-+ * 2.8.2. After they are generated by reference implementations. And the final
-+ * marked ones are taken from wycheproof, but we only do these for the encrypt
-+ * side, because mostly we're stressing the primitives rather than the actual
-+ * chapoly construction.
-+ */
-+
-+static const u8 enc_input001[] __initconst = {
-+	0x49, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x65, 0x74,
-+	0x2d, 0x44, 0x72, 0x61, 0x66, 0x74, 0x73, 0x20,
-+	0x61, 0x72, 0x65, 0x20, 0x64, 0x72, 0x61, 0x66,
-+	0x74, 0x20, 0x64, 0x6f, 0x63, 0x75, 0x6d, 0x65,
-+	0x6e, 0x74, 0x73, 0x20, 0x76, 0x61, 0x6c, 0x69,
-+	0x64, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x61, 0x20,
-+	0x6d, 0x61, 0x78, 0x69, 0x6d, 0x75, 0x6d, 0x20,
-+	0x6f, 0x66, 0x20, 0x73, 0x69, 0x78, 0x20, 0x6d,
-+	0x6f, 0x6e, 0x74, 0x68, 0x73, 0x20, 0x61, 0x6e,
-+	0x64, 0x20, 0x6d, 0x61, 0x79, 0x20, 0x62, 0x65,
-+	0x20, 0x75, 0x70, 0x64, 0x61, 0x74, 0x65, 0x64,
-+	0x2c, 0x20, 0x72, 0x65, 0x70, 0x6c, 0x61, 0x63,
-+	0x65, 0x64, 0x2c, 0x20, 0x6f, 0x72, 0x20, 0x6f,
-+	0x62, 0x73, 0x6f, 0x6c, 0x65, 0x74, 0x65, 0x64,
-+	0x20, 0x62, 0x79, 0x20, 0x6f, 0x74, 0x68, 0x65,
-+	0x72, 0x20, 0x64, 0x6f, 0x63, 0x75, 0x6d, 0x65,
-+	0x6e, 0x74, 0x73, 0x20, 0x61, 0x74, 0x20, 0x61,
-+	0x6e, 0x79, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x2e,
-+	0x20, 0x49, 0x74, 0x20, 0x69, 0x73, 0x20, 0x69,
-+	0x6e, 0x61, 0x70, 0x70, 0x72, 0x6f, 0x70, 0x72,
-+	0x69, 0x61, 0x74, 0x65, 0x20, 0x74, 0x6f, 0x20,
-+	0x75, 0x73, 0x65, 0x20, 0x49, 0x6e, 0x74, 0x65,
-+	0x72, 0x6e, 0x65, 0x74, 0x2d, 0x44, 0x72, 0x61,
-+	0x66, 0x74, 0x73, 0x20, 0x61, 0x73, 0x20, 0x72,
-+	0x65, 0x66, 0x65, 0x72, 0x65, 0x6e, 0x63, 0x65,
-+	0x20, 0x6d, 0x61, 0x74, 0x65, 0x72, 0x69, 0x61,
-+	0x6c, 0x20, 0x6f, 0x72, 0x20, 0x74, 0x6f, 0x20,
-+	0x63, 0x69, 0x74, 0x65, 0x20, 0x74, 0x68, 0x65,
-+	0x6d, 0x20, 0x6f, 0x74, 0x68, 0x65, 0x72, 0x20,
-+	0x74, 0x68, 0x61, 0x6e, 0x20, 0x61, 0x73, 0x20,
-+	0x2f, 0xe2, 0x80, 0x9c, 0x77, 0x6f, 0x72, 0x6b,
-+	0x20, 0x69, 0x6e, 0x20, 0x70, 0x72, 0x6f, 0x67,
-+	0x72, 0x65, 0x73, 0x73, 0x2e, 0x2f, 0xe2, 0x80,
-+	0x9d
-+};
-+static const u8 enc_output001[] __initconst = {
-+	0x64, 0xa0, 0x86, 0x15, 0x75, 0x86, 0x1a, 0xf4,
-+	0x60, 0xf0, 0x62, 0xc7, 0x9b, 0xe6, 0x43, 0xbd,
-+	0x5e, 0x80, 0x5c, 0xfd, 0x34, 0x5c, 0xf3, 0x89,
-+	0xf1, 0x08, 0x67, 0x0a, 0xc7, 0x6c, 0x8c, 0xb2,
-+	0x4c, 0x6c, 0xfc, 0x18, 0x75, 0x5d, 0x43, 0xee,
-+	0xa0, 0x9e, 0xe9, 0x4e, 0x38, 0x2d, 0x26, 0xb0,
-+	0xbd, 0xb7, 0xb7, 0x3c, 0x32, 0x1b, 0x01, 0x00,
-+	0xd4, 0xf0, 0x3b, 0x7f, 0x35, 0x58, 0x94, 0xcf,
-+	0x33, 0x2f, 0x83, 0x0e, 0x71, 0x0b, 0x97, 0xce,
-+	0x98, 0xc8, 0xa8, 0x4a, 0xbd, 0x0b, 0x94, 0x81,
-+	0x14, 0xad, 0x17, 0x6e, 0x00, 0x8d, 0x33, 0xbd,
-+	0x60, 0xf9, 0x82, 0xb1, 0xff, 0x37, 0xc8, 0x55,
-+	0x97, 0x97, 0xa0, 0x6e, 0xf4, 0xf0, 0xef, 0x61,
-+	0xc1, 0x86, 0x32, 0x4e, 0x2b, 0x35, 0x06, 0x38,
-+	0x36, 0x06, 0x90, 0x7b, 0x6a, 0x7c, 0x02, 0xb0,
-+	0xf9, 0xf6, 0x15, 0x7b, 0x53, 0xc8, 0x67, 0xe4,
-+	0xb9, 0x16, 0x6c, 0x76, 0x7b, 0x80, 0x4d, 0x46,
-+	0xa5, 0x9b, 0x52, 0x16, 0xcd, 0xe7, 0xa4, 0xe9,
-+	0x90, 0x40, 0xc5, 0xa4, 0x04, 0x33, 0x22, 0x5e,
-+	0xe2, 0x82, 0xa1, 0xb0, 0xa0, 0x6c, 0x52, 0x3e,
-+	0xaf, 0x45, 0x34, 0xd7, 0xf8, 0x3f, 0xa1, 0x15,
-+	0x5b, 0x00, 0x47, 0x71, 0x8c, 0xbc, 0x54, 0x6a,
-+	0x0d, 0x07, 0x2b, 0x04, 0xb3, 0x56, 0x4e, 0xea,
-+	0x1b, 0x42, 0x22, 0x73, 0xf5, 0x48, 0x27, 0x1a,
-+	0x0b, 0xb2, 0x31, 0x60, 0x53, 0xfa, 0x76, 0x99,
-+	0x19, 0x55, 0xeb, 0xd6, 0x31, 0x59, 0x43, 0x4e,
-+	0xce, 0xbb, 0x4e, 0x46, 0x6d, 0xae, 0x5a, 0x10,
-+	0x73, 0xa6, 0x72, 0x76, 0x27, 0x09, 0x7a, 0x10,
-+	0x49, 0xe6, 0x17, 0xd9, 0x1d, 0x36, 0x10, 0x94,
-+	0xfa, 0x68, 0xf0, 0xff, 0x77, 0x98, 0x71, 0x30,
-+	0x30, 0x5b, 0xea, 0xba, 0x2e, 0xda, 0x04, 0xdf,
-+	0x99, 0x7b, 0x71, 0x4d, 0x6c, 0x6f, 0x2c, 0x29,
-+	0xa6, 0xad, 0x5c, 0xb4, 0x02, 0x2b, 0x02, 0x70,
-+	0x9b, 0xee, 0xad, 0x9d, 0x67, 0x89, 0x0c, 0xbb,
-+	0x22, 0x39, 0x23, 0x36, 0xfe, 0xa1, 0x85, 0x1f,
-+	0x38
-+};
-+static const u8 enc_assoc001[] __initconst = {
-+	0xf3, 0x33, 0x88, 0x86, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x4e, 0x91
-+};
-+static const u8 enc_nonce001[] __initconst = {
-+	0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08
-+};
-+static const u8 enc_key001[] __initconst = {
-+	0x1c, 0x92, 0x40, 0xa5, 0xeb, 0x55, 0xd3, 0x8a,
-+	0xf3, 0x33, 0x88, 0x86, 0x04, 0xf6, 0xb5, 0xf0,
-+	0x47, 0x39, 0x17, 0xc1, 0x40, 0x2b, 0x80, 0x09,
-+	0x9d, 0xca, 0x5c, 0xbc, 0x20, 0x70, 0x75, 0xc0
-+};
-+
-+static const u8 enc_input002[] __initconst = { };
-+static const u8 enc_output002[] __initconst = {
-+	0xea, 0xe0, 0x1e, 0x9e, 0x2c, 0x91, 0xaa, 0xe1,
-+	0xdb, 0x5d, 0x99, 0x3f, 0x8a, 0xf7, 0x69, 0x92
-+};
-+static const u8 enc_assoc002[] __initconst = { };
-+static const u8 enc_nonce002[] __initconst = {
-+	0xca, 0xbf, 0x33, 0x71, 0x32, 0x45, 0x77, 0x8e
-+};
-+static const u8 enc_key002[] __initconst = {
-+	0x4c, 0xf5, 0x96, 0x83, 0x38, 0xe6, 0xae, 0x7f,
-+	0x2d, 0x29, 0x25, 0x76, 0xd5, 0x75, 0x27, 0x86,
-+	0x91, 0x9a, 0x27, 0x7a, 0xfb, 0x46, 0xc5, 0xef,
-+	0x94, 0x81, 0x79, 0x57, 0x14, 0x59, 0x40, 0x68
-+};
-+
-+static const u8 enc_input003[] __initconst = { };
-+static const u8 enc_output003[] __initconst = {
-+	0xdd, 0x6b, 0x3b, 0x82, 0xce, 0x5a, 0xbd, 0xd6,
-+	0xa9, 0x35, 0x83, 0xd8, 0x8c, 0x3d, 0x85, 0x77
-+};
-+static const u8 enc_assoc003[] __initconst = {
-+	0x33, 0x10, 0x41, 0x12, 0x1f, 0xf3, 0xd2, 0x6b
-+};
-+static const u8 enc_nonce003[] __initconst = {
-+	0x3d, 0x86, 0xb5, 0x6b, 0xc8, 0xa3, 0x1f, 0x1d
-+};
-+static const u8 enc_key003[] __initconst = {
-+	0x2d, 0xb0, 0x5d, 0x40, 0xc8, 0xed, 0x44, 0x88,
-+	0x34, 0xd1, 0x13, 0xaf, 0x57, 0xa1, 0xeb, 0x3a,
-+	0x2a, 0x80, 0x51, 0x36, 0xec, 0x5b, 0xbc, 0x08,
-+	0x93, 0x84, 0x21, 0xb5, 0x13, 0x88, 0x3c, 0x0d
-+};
-+
-+static const u8 enc_input004[] __initconst = {
-+	0xa4
-+};
-+static const u8 enc_output004[] __initconst = {
-+	0xb7, 0x1b, 0xb0, 0x73, 0x59, 0xb0, 0x84, 0xb2,
-+	0x6d, 0x8e, 0xab, 0x94, 0x31, 0xa1, 0xae, 0xac,
-+	0x89
-+};
-+static const u8 enc_assoc004[] __initconst = {
-+	0x6a, 0xe2, 0xad, 0x3f, 0x88, 0x39, 0x5a, 0x40
-+};
-+static const u8 enc_nonce004[] __initconst = {
-+	0xd2, 0x32, 0x1f, 0x29, 0x28, 0xc6, 0xc4, 0xc4
-+};
-+static const u8 enc_key004[] __initconst = {
-+	0x4b, 0x28, 0x4b, 0xa3, 0x7b, 0xbe, 0xe9, 0xf8,
-+	0x31, 0x80, 0x82, 0xd7, 0xd8, 0xe8, 0xb5, 0xa1,
-+	0xe2, 0x18, 0x18, 0x8a, 0x9c, 0xfa, 0xa3, 0x3d,
-+	0x25, 0x71, 0x3e, 0x40, 0xbc, 0x54, 0x7a, 0x3e
-+};
-+
-+static const u8 enc_input005[] __initconst = {
-+	0x2d
-+};
-+static const u8 enc_output005[] __initconst = {
-+	0xbf, 0xe1, 0x5b, 0x0b, 0xdb, 0x6b, 0xf5, 0x5e,
-+	0x6c, 0x5d, 0x84, 0x44, 0x39, 0x81, 0xc1, 0x9c,
-+	0xac
-+};
-+static const u8 enc_assoc005[] __initconst = { };
-+static const u8 enc_nonce005[] __initconst = {
-+	0x20, 0x1c, 0xaa, 0x5f, 0x9c, 0xbf, 0x92, 0x30
-+};
-+static const u8 enc_key005[] __initconst = {
-+	0x66, 0xca, 0x9c, 0x23, 0x2a, 0x4b, 0x4b, 0x31,
-+	0x0e, 0x92, 0x89, 0x8b, 0xf4, 0x93, 0xc7, 0x87,
-+	0x98, 0xa3, 0xd8, 0x39, 0xf8, 0xf4, 0xa7, 0x01,
-+	0xc0, 0x2e, 0x0a, 0xa6, 0x7e, 0x5a, 0x78, 0x87
-+};
-+
-+static const u8 enc_input006[] __initconst = {
-+	0x33, 0x2f, 0x94, 0xc1, 0xa4, 0xef, 0xcc, 0x2a,
-+	0x5b, 0xa6, 0xe5, 0x8f, 0x1d, 0x40, 0xf0, 0x92,
-+	0x3c, 0xd9, 0x24, 0x11, 0xa9, 0x71, 0xf9, 0x37,
-+	0x14, 0x99, 0xfa, 0xbe, 0xe6, 0x80, 0xde, 0x50,
-+	0xc9, 0x96, 0xd4, 0xb0, 0xec, 0x9e, 0x17, 0xec,
-+	0xd2, 0x5e, 0x72, 0x99, 0xfc, 0x0a, 0xe1, 0xcb,
-+	0x48, 0xd2, 0x85, 0xdd, 0x2f, 0x90, 0xe0, 0x66,
-+	0x3b, 0xe6, 0x20, 0x74, 0xbe, 0x23, 0x8f, 0xcb,
-+	0xb4, 0xe4, 0xda, 0x48, 0x40, 0xa6, 0xd1, 0x1b,
-+	0xc7, 0x42, 0xce, 0x2f, 0x0c, 0xa6, 0x85, 0x6e,
-+	0x87, 0x37, 0x03, 0xb1, 0x7c, 0x25, 0x96, 0xa3,
-+	0x05, 0xd8, 0xb0, 0xf4, 0xed, 0xea, 0xc2, 0xf0,
-+	0x31, 0x98, 0x6c, 0xd1, 0x14, 0x25, 0xc0, 0xcb,
-+	0x01, 0x74, 0xd0, 0x82, 0xf4, 0x36, 0xf5, 0x41,
-+	0xd5, 0xdc, 0xca, 0xc5, 0xbb, 0x98, 0xfe, 0xfc,
-+	0x69, 0x21, 0x70, 0xd8, 0xa4, 0x4b, 0xc8, 0xde,
-+	0x8f
-+};
-+static const u8 enc_output006[] __initconst = {
-+	0x8b, 0x06, 0xd3, 0x31, 0xb0, 0x93, 0x45, 0xb1,
-+	0x75, 0x6e, 0x26, 0xf9, 0x67, 0xbc, 0x90, 0x15,
-+	0x81, 0x2c, 0xb5, 0xf0, 0xc6, 0x2b, 0xc7, 0x8c,
-+	0x56, 0xd1, 0xbf, 0x69, 0x6c, 0x07, 0xa0, 0xda,
-+	0x65, 0x27, 0xc9, 0x90, 0x3d, 0xef, 0x4b, 0x11,
-+	0x0f, 0x19, 0x07, 0xfd, 0x29, 0x92, 0xd9, 0xc8,
-+	0xf7, 0x99, 0x2e, 0x4a, 0xd0, 0xb8, 0x2c, 0xdc,
-+	0x93, 0xf5, 0x9e, 0x33, 0x78, 0xd1, 0x37, 0xc3,
-+	0x66, 0xd7, 0x5e, 0xbc, 0x44, 0xbf, 0x53, 0xa5,
-+	0xbc, 0xc4, 0xcb, 0x7b, 0x3a, 0x8e, 0x7f, 0x02,
-+	0xbd, 0xbb, 0xe7, 0xca, 0xa6, 0x6c, 0x6b, 0x93,
-+	0x21, 0x93, 0x10, 0x61, 0xe7, 0x69, 0xd0, 0x78,
-+	0xf3, 0x07, 0x5a, 0x1a, 0x8f, 0x73, 0xaa, 0xb1,
-+	0x4e, 0xd3, 0xda, 0x4f, 0xf3, 0x32, 0xe1, 0x66,
-+	0x3e, 0x6c, 0xc6, 0x13, 0xba, 0x06, 0x5b, 0xfc,
-+	0x6a, 0xe5, 0x6f, 0x60, 0xfb, 0x07, 0x40, 0xb0,
-+	0x8c, 0x9d, 0x84, 0x43, 0x6b, 0xc1, 0xf7, 0x8d,
-+	0x8d, 0x31, 0xf7, 0x7a, 0x39, 0x4d, 0x8f, 0x9a,
-+	0xeb
-+};
-+static const u8 enc_assoc006[] __initconst = {
-+	0x70, 0xd3, 0x33, 0xf3, 0x8b, 0x18, 0x0b
-+};
-+static const u8 enc_nonce006[] __initconst = {
-+	0xdf, 0x51, 0x84, 0x82, 0x42, 0x0c, 0x75, 0x9c
-+};
-+static const u8 enc_key006[] __initconst = {
-+	0x68, 0x7b, 0x8d, 0x8e, 0xe3, 0xc4, 0xdd, 0xae,
-+	0xdf, 0x72, 0x7f, 0x53, 0x72, 0x25, 0x1e, 0x78,
-+	0x91, 0xcb, 0x69, 0x76, 0x1f, 0x49, 0x93, 0xf9,
-+	0x6f, 0x21, 0xcc, 0x39, 0x9c, 0xad, 0xb1, 0x01
-+};
-+
-+static const u8 enc_input007[] __initconst = {
-+	0x9b, 0x18, 0xdb, 0xdd, 0x9a, 0x0f, 0x3e, 0xa5,
-+	0x15, 0x17, 0xde, 0xdf, 0x08, 0x9d, 0x65, 0x0a,
-+	0x67, 0x30, 0x12, 0xe2, 0x34, 0x77, 0x4b, 0xc1,
-+	0xd9, 0xc6, 0x1f, 0xab, 0xc6, 0x18, 0x50, 0x17,
-+	0xa7, 0x9d, 0x3c, 0xa6, 0xc5, 0x35, 0x8c, 0x1c,
-+	0xc0, 0xa1, 0x7c, 0x9f, 0x03, 0x89, 0xca, 0xe1,
-+	0xe6, 0xe9, 0xd4, 0xd3, 0x88, 0xdb, 0xb4, 0x51,
-+	0x9d, 0xec, 0xb4, 0xfc, 0x52, 0xee, 0x6d, 0xf1,
-+	0x75, 0x42, 0xc6, 0xfd, 0xbd, 0x7a, 0x8e, 0x86,
-+	0xfc, 0x44, 0xb3, 0x4f, 0xf3, 0xea, 0x67, 0x5a,
-+	0x41, 0x13, 0xba, 0xb0, 0xdc, 0xe1, 0xd3, 0x2a,
-+	0x7c, 0x22, 0xb3, 0xca, 0xac, 0x6a, 0x37, 0x98,
-+	0x3e, 0x1d, 0x40, 0x97, 0xf7, 0x9b, 0x1d, 0x36,
-+	0x6b, 0xb3, 0x28, 0xbd, 0x60, 0x82, 0x47, 0x34,
-+	0xaa, 0x2f, 0x7d, 0xe9, 0xa8, 0x70, 0x81, 0x57,
-+	0xd4, 0xb9, 0x77, 0x0a, 0x9d, 0x29, 0xa7, 0x84,
-+	0x52, 0x4f, 0xc2, 0x4a, 0x40, 0x3b, 0x3c, 0xd4,
-+	0xc9, 0x2a, 0xdb, 0x4a, 0x53, 0xc4, 0xbe, 0x80,
-+	0xe9, 0x51, 0x7f, 0x8f, 0xc7, 0xa2, 0xce, 0x82,
-+	0x5c, 0x91, 0x1e, 0x74, 0xd9, 0xd0, 0xbd, 0xd5,
-+	0xf3, 0xfd, 0xda, 0x4d, 0x25, 0xb4, 0xbb, 0x2d,
-+	0xac, 0x2f, 0x3d, 0x71, 0x85, 0x7b, 0xcf, 0x3c,
-+	0x7b, 0x3e, 0x0e, 0x22, 0x78, 0x0c, 0x29, 0xbf,
-+	0xe4, 0xf4, 0x57, 0xb3, 0xcb, 0x49, 0xa0, 0xfc,
-+	0x1e, 0x05, 0x4e, 0x16, 0xbc, 0xd5, 0xa8, 0xa3,
-+	0xee, 0x05, 0x35, 0xc6, 0x7c, 0xab, 0x60, 0x14,
-+	0x55, 0x1a, 0x8e, 0xc5, 0x88, 0x5d, 0xd5, 0x81,
-+	0xc2, 0x81, 0xa5, 0xc4, 0x60, 0xdb, 0xaf, 0x77,
-+	0x91, 0xe1, 0xce, 0xa2, 0x7e, 0x7f, 0x42, 0xe3,
-+	0xb0, 0x13, 0x1c, 0x1f, 0x25, 0x60, 0x21, 0xe2,
-+	0x40, 0x5f, 0x99, 0xb7, 0x73, 0xec, 0x9b, 0x2b,
-+	0xf0, 0x65, 0x11, 0xc8, 0xd0, 0x0a, 0x9f, 0xd3
-+};
-+static const u8 enc_output007[] __initconst = {
-+	0x85, 0x04, 0xc2, 0xed, 0x8d, 0xfd, 0x97, 0x5c,
-+	0xd2, 0xb7, 0xe2, 0xc1, 0x6b, 0xa3, 0xba, 0xf8,
-+	0xc9, 0x50, 0xc3, 0xc6, 0xa5, 0xe3, 0xa4, 0x7c,
-+	0xc3, 0x23, 0x49, 0x5e, 0xa9, 0xb9, 0x32, 0xeb,
-+	0x8a, 0x7c, 0xca, 0xe5, 0xec, 0xfb, 0x7c, 0xc0,
-+	0xcb, 0x7d, 0xdc, 0x2c, 0x9d, 0x92, 0x55, 0x21,
-+	0x0a, 0xc8, 0x43, 0x63, 0x59, 0x0a, 0x31, 0x70,
-+	0x82, 0x67, 0x41, 0x03, 0xf8, 0xdf, 0xf2, 0xac,
-+	0xa7, 0x02, 0xd4, 0xd5, 0x8a, 0x2d, 0xc8, 0x99,
-+	0x19, 0x66, 0xd0, 0xf6, 0x88, 0x2c, 0x77, 0xd9,
-+	0xd4, 0x0d, 0x6c, 0xbd, 0x98, 0xde, 0xe7, 0x7f,
-+	0xad, 0x7e, 0x8a, 0xfb, 0xe9, 0x4b, 0xe5, 0xf7,
-+	0xe5, 0x50, 0xa0, 0x90, 0x3f, 0xd6, 0x22, 0x53,
-+	0xe3, 0xfe, 0x1b, 0xcc, 0x79, 0x3b, 0xec, 0x12,
-+	0x47, 0x52, 0xa7, 0xd6, 0x04, 0xe3, 0x52, 0xe6,
-+	0x93, 0x90, 0x91, 0x32, 0x73, 0x79, 0xb8, 0xd0,
-+	0x31, 0xde, 0x1f, 0x9f, 0x2f, 0x05, 0x38, 0x54,
-+	0x2f, 0x35, 0x04, 0x39, 0xe0, 0xa7, 0xba, 0xc6,
-+	0x52, 0xf6, 0x37, 0x65, 0x4c, 0x07, 0xa9, 0x7e,
-+	0xb3, 0x21, 0x6f, 0x74, 0x8c, 0xc9, 0xde, 0xdb,
-+	0x65, 0x1b, 0x9b, 0xaa, 0x60, 0xb1, 0x03, 0x30,
-+	0x6b, 0xb2, 0x03, 0xc4, 0x1c, 0x04, 0xf8, 0x0f,
-+	0x64, 0xaf, 0x46, 0xe4, 0x65, 0x99, 0x49, 0xe2,
-+	0xea, 0xce, 0x78, 0x00, 0xd8, 0x8b, 0xd5, 0x2e,
-+	0xcf, 0xfc, 0x40, 0x49, 0xe8, 0x58, 0xdc, 0x34,
-+	0x9c, 0x8c, 0x61, 0xbf, 0x0a, 0x8e, 0xec, 0x39,
-+	0xa9, 0x30, 0x05, 0x5a, 0xd2, 0x56, 0x01, 0xc7,
-+	0xda, 0x8f, 0x4e, 0xbb, 0x43, 0xa3, 0x3a, 0xf9,
-+	0x15, 0x2a, 0xd0, 0xa0, 0x7a, 0x87, 0x34, 0x82,
-+	0xfe, 0x8a, 0xd1, 0x2d, 0x5e, 0xc7, 0xbf, 0x04,
-+	0x53, 0x5f, 0x3b, 0x36, 0xd4, 0x25, 0x5c, 0x34,
-+	0x7a, 0x8d, 0xd5, 0x05, 0xce, 0x72, 0xca, 0xef,
-+	0x7a, 0x4b, 0xbc, 0xb0, 0x10, 0x5c, 0x96, 0x42,
-+	0x3a, 0x00, 0x98, 0xcd, 0x15, 0xe8, 0xb7, 0x53
-+};
-+static const u8 enc_assoc007[] __initconst = { };
-+static const u8 enc_nonce007[] __initconst = {
-+	0xde, 0x7b, 0xef, 0xc3, 0x65, 0x1b, 0x68, 0xb0
-+};
-+static const u8 enc_key007[] __initconst = {
-+	0x8d, 0xb8, 0x91, 0x48, 0xf0, 0xe7, 0x0a, 0xbd,
-+	0xf9, 0x3f, 0xcd, 0xd9, 0xa0, 0x1e, 0x42, 0x4c,
-+	0xe7, 0xde, 0x25, 0x3d, 0xa3, 0xd7, 0x05, 0x80,
-+	0x8d, 0xf2, 0x82, 0xac, 0x44, 0x16, 0x51, 0x01
-+};
-+
-+static const u8 enc_input008[] __initconst = {
-+	0xc3, 0x09, 0x94, 0x62, 0xe6, 0x46, 0x2e, 0x10,
-+	0xbe, 0x00, 0xe4, 0xfc, 0xf3, 0x40, 0xa3, 0xe2,
-+	0x0f, 0xc2, 0x8b, 0x28, 0xdc, 0xba, 0xb4, 0x3c,
-+	0xe4, 0x21, 0x58, 0x61, 0xcd, 0x8b, 0xcd, 0xfb,
-+	0xac, 0x94, 0xa1, 0x45, 0xf5, 0x1c, 0xe1, 0x12,
-+	0xe0, 0x3b, 0x67, 0x21, 0x54, 0x5e, 0x8c, 0xaa,
-+	0xcf, 0xdb, 0xb4, 0x51, 0xd4, 0x13, 0xda, 0xe6,
-+	0x83, 0x89, 0xb6, 0x92, 0xe9, 0x21, 0x76, 0xa4,
-+	0x93, 0x7d, 0x0e, 0xfd, 0x96, 0x36, 0x03, 0x91,
-+	0x43, 0x5c, 0x92, 0x49, 0x62, 0x61, 0x7b, 0xeb,
-+	0x43, 0x89, 0xb8, 0x12, 0x20, 0x43, 0xd4, 0x47,
-+	0x06, 0x84, 0xee, 0x47, 0xe9, 0x8a, 0x73, 0x15,
-+	0x0f, 0x72, 0xcf, 0xed, 0xce, 0x96, 0xb2, 0x7f,
-+	0x21, 0x45, 0x76, 0xeb, 0x26, 0x28, 0x83, 0x6a,
-+	0xad, 0xaa, 0xa6, 0x81, 0xd8, 0x55, 0xb1, 0xa3,
-+	0x85, 0xb3, 0x0c, 0xdf, 0xf1, 0x69, 0x2d, 0x97,
-+	0x05, 0x2a, 0xbc, 0x7c, 0x7b, 0x25, 0xf8, 0x80,
-+	0x9d, 0x39, 0x25, 0xf3, 0x62, 0xf0, 0x66, 0x5e,
-+	0xf4, 0xa0, 0xcf, 0xd8, 0xfd, 0x4f, 0xb1, 0x1f,
-+	0x60, 0x3a, 0x08, 0x47, 0xaf, 0xe1, 0xf6, 0x10,
-+	0x77, 0x09, 0xa7, 0x27, 0x8f, 0x9a, 0x97, 0x5a,
-+	0x26, 0xfa, 0xfe, 0x41, 0x32, 0x83, 0x10, 0xe0,
-+	0x1d, 0xbf, 0x64, 0x0d, 0xf4, 0x1c, 0x32, 0x35,
-+	0xe5, 0x1b, 0x36, 0xef, 0xd4, 0x4a, 0x93, 0x4d,
-+	0x00, 0x7c, 0xec, 0x02, 0x07, 0x8b, 0x5d, 0x7d,
-+	0x1b, 0x0e, 0xd1, 0xa6, 0xa5, 0x5d, 0x7d, 0x57,
-+	0x88, 0xa8, 0xcc, 0x81, 0xb4, 0x86, 0x4e, 0xb4,
-+	0x40, 0xe9, 0x1d, 0xc3, 0xb1, 0x24, 0x3e, 0x7f,
-+	0xcc, 0x8a, 0x24, 0x9b, 0xdf, 0x6d, 0xf0, 0x39,
-+	0x69, 0x3e, 0x4c, 0xc0, 0x96, 0xe4, 0x13, 0xda,
-+	0x90, 0xda, 0xf4, 0x95, 0x66, 0x8b, 0x17, 0x17,
-+	0xfe, 0x39, 0x43, 0x25, 0xaa, 0xda, 0xa0, 0x43,
-+	0x3c, 0xb1, 0x41, 0x02, 0xa3, 0xf0, 0xa7, 0x19,
-+	0x59, 0xbc, 0x1d, 0x7d, 0x6c, 0x6d, 0x91, 0x09,
-+	0x5c, 0xb7, 0x5b, 0x01, 0xd1, 0x6f, 0x17, 0x21,
-+	0x97, 0xbf, 0x89, 0x71, 0xa5, 0xb0, 0x6e, 0x07,
-+	0x45, 0xfd, 0x9d, 0xea, 0x07, 0xf6, 0x7a, 0x9f,
-+	0x10, 0x18, 0x22, 0x30, 0x73, 0xac, 0xd4, 0x6b,
-+	0x72, 0x44, 0xed, 0xd9, 0x19, 0x9b, 0x2d, 0x4a,
-+	0x41, 0xdd, 0xd1, 0x85, 0x5e, 0x37, 0x19, 0xed,
-+	0xd2, 0x15, 0x8f, 0x5e, 0x91, 0xdb, 0x33, 0xf2,
-+	0xe4, 0xdb, 0xff, 0x98, 0xfb, 0xa3, 0xb5, 0xca,
-+	0x21, 0x69, 0x08, 0xe7, 0x8a, 0xdf, 0x90, 0xff,
-+	0x3e, 0xe9, 0x20, 0x86, 0x3c, 0xe9, 0xfc, 0x0b,
-+	0xfe, 0x5c, 0x61, 0xaa, 0x13, 0x92, 0x7f, 0x7b,
-+	0xec, 0xe0, 0x6d, 0xa8, 0x23, 0x22, 0xf6, 0x6b,
-+	0x77, 0xc4, 0xfe, 0x40, 0x07, 0x3b, 0xb6, 0xf6,
-+	0x8e, 0x5f, 0xd4, 0xb9, 0xb7, 0x0f, 0x21, 0x04,
-+	0xef, 0x83, 0x63, 0x91, 0x69, 0x40, 0xa3, 0x48,
-+	0x5c, 0xd2, 0x60, 0xf9, 0x4f, 0x6c, 0x47, 0x8b,
-+	0x3b, 0xb1, 0x9f, 0x8e, 0xee, 0x16, 0x8a, 0x13,
-+	0xfc, 0x46, 0x17, 0xc3, 0xc3, 0x32, 0x56, 0xf8,
-+	0x3c, 0x85, 0x3a, 0xb6, 0x3e, 0xaa, 0x89, 0x4f,
-+	0xb3, 0xdf, 0x38, 0xfd, 0xf1, 0xe4, 0x3a, 0xc0,
-+	0xe6, 0x58, 0xb5, 0x8f, 0xc5, 0x29, 0xa2, 0x92,
-+	0x4a, 0xb6, 0xa0, 0x34, 0x7f, 0xab, 0xb5, 0x8a,
-+	0x90, 0xa1, 0xdb, 0x4d, 0xca, 0xb6, 0x2c, 0x41,
-+	0x3c, 0xf7, 0x2b, 0x21, 0xc3, 0xfd, 0xf4, 0x17,
-+	0x5c, 0xb5, 0x33, 0x17, 0x68, 0x2b, 0x08, 0x30,
-+	0xf3, 0xf7, 0x30, 0x3c, 0x96, 0xe6, 0x6a, 0x20,
-+	0x97, 0xe7, 0x4d, 0x10, 0x5f, 0x47, 0x5f, 0x49,
-+	0x96, 0x09, 0xf0, 0x27, 0x91, 0xc8, 0xf8, 0x5a,
-+	0x2e, 0x79, 0xb5, 0xe2, 0xb8, 0xe8, 0xb9, 0x7b,
-+	0xd5, 0x10, 0xcb, 0xff, 0x5d, 0x14, 0x73, 0xf3
-+};
-+static const u8 enc_output008[] __initconst = {
-+	0x14, 0xf6, 0x41, 0x37, 0xa6, 0xd4, 0x27, 0xcd,
-+	0xdb, 0x06, 0x3e, 0x9a, 0x4e, 0xab, 0xd5, 0xb1,
-+	0x1e, 0x6b, 0xd2, 0xbc, 0x11, 0xf4, 0x28, 0x93,
-+	0x63, 0x54, 0xef, 0xbb, 0x5e, 0x1d, 0x3a, 0x1d,
-+	0x37, 0x3c, 0x0a, 0x6c, 0x1e, 0xc2, 0xd1, 0x2c,
-+	0xb5, 0xa3, 0xb5, 0x7b, 0xb8, 0x8f, 0x25, 0xa6,
-+	0x1b, 0x61, 0x1c, 0xec, 0x28, 0x58, 0x26, 0xa4,
-+	0xa8, 0x33, 0x28, 0x25, 0x5c, 0x45, 0x05, 0xe5,
-+	0x6c, 0x99, 0xe5, 0x45, 0xc4, 0xa2, 0x03, 0x84,
-+	0x03, 0x73, 0x1e, 0x8c, 0x49, 0xac, 0x20, 0xdd,
-+	0x8d, 0xb3, 0xc4, 0xf5, 0xe7, 0x4f, 0xf1, 0xed,
-+	0xa1, 0x98, 0xde, 0xa4, 0x96, 0xdd, 0x2f, 0xab,
-+	0xab, 0x97, 0xcf, 0x3e, 0xd2, 0x9e, 0xb8, 0x13,
-+	0x07, 0x28, 0x29, 0x19, 0xaf, 0xfd, 0xf2, 0x49,
-+	0x43, 0xea, 0x49, 0x26, 0x91, 0xc1, 0x07, 0xd6,
-+	0xbb, 0x81, 0x75, 0x35, 0x0d, 0x24, 0x7f, 0xc8,
-+	0xda, 0xd4, 0xb7, 0xeb, 0xe8, 0x5c, 0x09, 0xa2,
-+	0x2f, 0xdc, 0x28, 0x7d, 0x3a, 0x03, 0xfa, 0x94,
-+	0xb5, 0x1d, 0x17, 0x99, 0x36, 0xc3, 0x1c, 0x18,
-+	0x34, 0xe3, 0x9f, 0xf5, 0x55, 0x7c, 0xb0, 0x60,
-+	0x9d, 0xff, 0xac, 0xd4, 0x61, 0xf2, 0xad, 0xf8,
-+	0xce, 0xc7, 0xbe, 0x5c, 0xd2, 0x95, 0xa8, 0x4b,
-+	0x77, 0x13, 0x19, 0x59, 0x26, 0xc9, 0xb7, 0x8f,
-+	0x6a, 0xcb, 0x2d, 0x37, 0x91, 0xea, 0x92, 0x9c,
-+	0x94, 0x5b, 0xda, 0x0b, 0xce, 0xfe, 0x30, 0x20,
-+	0xf8, 0x51, 0xad, 0xf2, 0xbe, 0xe7, 0xc7, 0xff,
-+	0xb3, 0x33, 0x91, 0x6a, 0xc9, 0x1a, 0x41, 0xc9,
-+	0x0f, 0xf3, 0x10, 0x0e, 0xfd, 0x53, 0xff, 0x6c,
-+	0x16, 0x52, 0xd9, 0xf3, 0xf7, 0x98, 0x2e, 0xc9,
-+	0x07, 0x31, 0x2c, 0x0c, 0x72, 0xd7, 0xc5, 0xc6,
-+	0x08, 0x2a, 0x7b, 0xda, 0xbd, 0x7e, 0x02, 0xea,
-+	0x1a, 0xbb, 0xf2, 0x04, 0x27, 0x61, 0x28, 0x8e,
-+	0xf5, 0x04, 0x03, 0x1f, 0x4c, 0x07, 0x55, 0x82,
-+	0xec, 0x1e, 0xd7, 0x8b, 0x2f, 0x65, 0x56, 0xd1,
-+	0xd9, 0x1e, 0x3c, 0xe9, 0x1f, 0x5e, 0x98, 0x70,
-+	0x38, 0x4a, 0x8c, 0x49, 0xc5, 0x43, 0xa0, 0xa1,
-+	0x8b, 0x74, 0x9d, 0x4c, 0x62, 0x0d, 0x10, 0x0c,
-+	0xf4, 0x6c, 0x8f, 0xe0, 0xaa, 0x9a, 0x8d, 0xb7,
-+	0xe0, 0xbe, 0x4c, 0x87, 0xf1, 0x98, 0x2f, 0xcc,
-+	0xed, 0xc0, 0x52, 0x29, 0xdc, 0x83, 0xf8, 0xfc,
-+	0x2c, 0x0e, 0xa8, 0x51, 0x4d, 0x80, 0x0d, 0xa3,
-+	0xfe, 0xd8, 0x37, 0xe7, 0x41, 0x24, 0xfc, 0xfb,
-+	0x75, 0xe3, 0x71, 0x7b, 0x57, 0x45, 0xf5, 0x97,
-+	0x73, 0x65, 0x63, 0x14, 0x74, 0xb8, 0x82, 0x9f,
-+	0xf8, 0x60, 0x2f, 0x8a, 0xf2, 0x4e, 0xf1, 0x39,
-+	0xda, 0x33, 0x91, 0xf8, 0x36, 0xe0, 0x8d, 0x3f,
-+	0x1f, 0x3b, 0x56, 0xdc, 0xa0, 0x8f, 0x3c, 0x9d,
-+	0x71, 0x52, 0xa7, 0xb8, 0xc0, 0xa5, 0xc6, 0xa2,
-+	0x73, 0xda, 0xf4, 0x4b, 0x74, 0x5b, 0x00, 0x3d,
-+	0x99, 0xd7, 0x96, 0xba, 0xe6, 0xe1, 0xa6, 0x96,
-+	0x38, 0xad, 0xb3, 0xc0, 0xd2, 0xba, 0x91, 0x6b,
-+	0xf9, 0x19, 0xdd, 0x3b, 0xbe, 0xbe, 0x9c, 0x20,
-+	0x50, 0xba, 0xa1, 0xd0, 0xce, 0x11, 0xbd, 0x95,
-+	0xd8, 0xd1, 0xdd, 0x33, 0x85, 0x74, 0xdc, 0xdb,
-+	0x66, 0x76, 0x44, 0xdc, 0x03, 0x74, 0x48, 0x35,
-+	0x98, 0xb1, 0x18, 0x47, 0x94, 0x7d, 0xff, 0x62,
-+	0xe4, 0x58, 0x78, 0xab, 0xed, 0x95, 0x36, 0xd9,
-+	0x84, 0x91, 0x82, 0x64, 0x41, 0xbb, 0x58, 0xe6,
-+	0x1c, 0x20, 0x6d, 0x15, 0x6b, 0x13, 0x96, 0xe8,
-+	0x35, 0x7f, 0xdc, 0x40, 0x2c, 0xe9, 0xbc, 0x8a,
-+	0x4f, 0x92, 0xec, 0x06, 0x2d, 0x50, 0xdf, 0x93,
-+	0x5d, 0x65, 0x5a, 0xa8, 0xfc, 0x20, 0x50, 0x14,
-+	0xa9, 0x8a, 0x7e, 0x1d, 0x08, 0x1f, 0xe2, 0x99,
-+	0xd0, 0xbe, 0xfb, 0x3a, 0x21, 0x9d, 0xad, 0x86,
-+	0x54, 0xfd, 0x0d, 0x98, 0x1c, 0x5a, 0x6f, 0x1f,
-+	0x9a, 0x40, 0xcd, 0xa2, 0xff, 0x6a, 0xf1, 0x54
-+};
-+static const u8 enc_assoc008[] __initconst = { };
-+static const u8 enc_nonce008[] __initconst = {
-+	0x0e, 0x0d, 0x57, 0xbb, 0x7b, 0x40, 0x54, 0x02
-+};
-+static const u8 enc_key008[] __initconst = {
-+	0xf2, 0xaa, 0x4f, 0x99, 0xfd, 0x3e, 0xa8, 0x53,
-+	0xc1, 0x44, 0xe9, 0x81, 0x18, 0xdc, 0xf5, 0xf0,
-+	0x3e, 0x44, 0x15, 0x59, 0xe0, 0xc5, 0x44, 0x86,
-+	0xc3, 0x91, 0xa8, 0x75, 0xc0, 0x12, 0x46, 0xba
-+};
-+
-+static const u8 enc_input009[] __initconst = {
-+	0xe6, 0xc3, 0xdb, 0x63, 0x55, 0x15, 0xe3, 0x5b,
-+	0xb7, 0x4b, 0x27, 0x8b, 0x5a, 0xdd, 0xc2, 0xe8,
-+	0x3a, 0x6b, 0xd7, 0x81, 0x96, 0x35, 0x97, 0xca,
-+	0xd7, 0x68, 0xe8, 0xef, 0xce, 0xab, 0xda, 0x09,
-+	0x6e, 0xd6, 0x8e, 0xcb, 0x55, 0xb5, 0xe1, 0xe5,
-+	0x57, 0xfd, 0xc4, 0xe3, 0xe0, 0x18, 0x4f, 0x85,
-+	0xf5, 0x3f, 0x7e, 0x4b, 0x88, 0xc9, 0x52, 0x44,
-+	0x0f, 0xea, 0xaf, 0x1f, 0x71, 0x48, 0x9f, 0x97,
-+	0x6d, 0xb9, 0x6f, 0x00, 0xa6, 0xde, 0x2b, 0x77,
-+	0x8b, 0x15, 0xad, 0x10, 0xa0, 0x2b, 0x7b, 0x41,
-+	0x90, 0x03, 0x2d, 0x69, 0xae, 0xcc, 0x77, 0x7c,
-+	0xa5, 0x9d, 0x29, 0x22, 0xc2, 0xea, 0xb4, 0x00,
-+	0x1a, 0xd2, 0x7a, 0x98, 0x8a, 0xf9, 0xf7, 0x82,
-+	0xb0, 0xab, 0xd8, 0xa6, 0x94, 0x8d, 0x58, 0x2f,
-+	0x01, 0x9e, 0x00, 0x20, 0xfc, 0x49, 0xdc, 0x0e,
-+	0x03, 0xe8, 0x45, 0x10, 0xd6, 0xa8, 0xda, 0x55,
-+	0x10, 0x9a, 0xdf, 0x67, 0x22, 0x8b, 0x43, 0xab,
-+	0x00, 0xbb, 0x02, 0xc8, 0xdd, 0x7b, 0x97, 0x17,
-+	0xd7, 0x1d, 0x9e, 0x02, 0x5e, 0x48, 0xde, 0x8e,
-+	0xcf, 0x99, 0x07, 0x95, 0x92, 0x3c, 0x5f, 0x9f,
-+	0xc5, 0x8a, 0xc0, 0x23, 0xaa, 0xd5, 0x8c, 0x82,
-+	0x6e, 0x16, 0x92, 0xb1, 0x12, 0x17, 0x07, 0xc3,
-+	0xfb, 0x36, 0xf5, 0x6c, 0x35, 0xd6, 0x06, 0x1f,
-+	0x9f, 0xa7, 0x94, 0xa2, 0x38, 0x63, 0x9c, 0xb0,
-+	0x71, 0xb3, 0xa5, 0xd2, 0xd8, 0xba, 0x9f, 0x08,
-+	0x01, 0xb3, 0xff, 0x04, 0x97, 0x73, 0x45, 0x1b,
-+	0xd5, 0xa9, 0x9c, 0x80, 0xaf, 0x04, 0x9a, 0x85,
-+	0xdb, 0x32, 0x5b, 0x5d, 0x1a, 0xc1, 0x36, 0x28,
-+	0x10, 0x79, 0xf1, 0x3c, 0xbf, 0x1a, 0x41, 0x5c,
-+	0x4e, 0xdf, 0xb2, 0x7c, 0x79, 0x3b, 0x7a, 0x62,
-+	0x3d, 0x4b, 0xc9, 0x9b, 0x2a, 0x2e, 0x7c, 0xa2,
-+	0xb1, 0x11, 0x98, 0xa7, 0x34, 0x1a, 0x00, 0xf3,
-+	0xd1, 0xbc, 0x18, 0x22, 0xba, 0x02, 0x56, 0x62,
-+	0x31, 0x10, 0x11, 0x6d, 0xe0, 0x54, 0x9d, 0x40,
-+	0x1f, 0x26, 0x80, 0x41, 0xca, 0x3f, 0x68, 0x0f,
-+	0x32, 0x1d, 0x0a, 0x8e, 0x79, 0xd8, 0xa4, 0x1b,
-+	0x29, 0x1c, 0x90, 0x8e, 0xc5, 0xe3, 0xb4, 0x91,
-+	0x37, 0x9a, 0x97, 0x86, 0x99, 0xd5, 0x09, 0xc5,
-+	0xbb, 0xa3, 0x3f, 0x21, 0x29, 0x82, 0x14, 0x5c,
-+	0xab, 0x25, 0xfb, 0xf2, 0x4f, 0x58, 0x26, 0xd4,
-+	0x83, 0xaa, 0x66, 0x89, 0x67, 0x7e, 0xc0, 0x49,
-+	0xe1, 0x11, 0x10, 0x7f, 0x7a, 0xda, 0x29, 0x04,
-+	0xff, 0xf0, 0xcb, 0x09, 0x7c, 0x9d, 0xfa, 0x03,
-+	0x6f, 0x81, 0x09, 0x31, 0x60, 0xfb, 0x08, 0xfa,
-+	0x74, 0xd3, 0x64, 0x44, 0x7c, 0x55, 0x85, 0xec,
-+	0x9c, 0x6e, 0x25, 0xb7, 0x6c, 0xc5, 0x37, 0xb6,
-+	0x83, 0x87, 0x72, 0x95, 0x8b, 0x9d, 0xe1, 0x69,
-+	0x5c, 0x31, 0x95, 0x42, 0xa6, 0x2c, 0xd1, 0x36,
-+	0x47, 0x1f, 0xec, 0x54, 0xab, 0xa2, 0x1c, 0xd8,
-+	0x00, 0xcc, 0xbc, 0x0d, 0x65, 0xe2, 0x67, 0xbf,
-+	0xbc, 0xea, 0xee, 0x9e, 0xe4, 0x36, 0x95, 0xbe,
-+	0x73, 0xd9, 0xa6, 0xd9, 0x0f, 0xa0, 0xcc, 0x82,
-+	0x76, 0x26, 0xad, 0x5b, 0x58, 0x6c, 0x4e, 0xab,
-+	0x29, 0x64, 0xd3, 0xd9, 0xa9, 0x08, 0x8c, 0x1d,
-+	0xa1, 0x4f, 0x80, 0xd8, 0x3f, 0x94, 0xfb, 0xd3,
-+	0x7b, 0xfc, 0xd1, 0x2b, 0xc3, 0x21, 0xeb, 0xe5,
-+	0x1c, 0x84, 0x23, 0x7f, 0x4b, 0xfa, 0xdb, 0x34,
-+	0x18, 0xa2, 0xc2, 0xe5, 0x13, 0xfe, 0x6c, 0x49,
-+	0x81, 0xd2, 0x73, 0xe7, 0xe2, 0xd7, 0xe4, 0x4f,
-+	0x4b, 0x08, 0x6e, 0xb1, 0x12, 0x22, 0x10, 0x9d,
-+	0xac, 0x51, 0x1e, 0x17, 0xd9, 0x8a, 0x0b, 0x42,
-+	0x88, 0x16, 0x81, 0x37, 0x7c, 0x6a, 0xf7, 0xef,
-+	0x2d, 0xe3, 0xd9, 0xf8, 0x5f, 0xe0, 0x53, 0x27,
-+	0x74, 0xb9, 0xe2, 0xd6, 0x1c, 0x80, 0x2c, 0x52,
-+	0x65
-+};
-+static const u8 enc_output009[] __initconst = {
-+	0xfd, 0x81, 0x8d, 0xd0, 0x3d, 0xb4, 0xd5, 0xdf,
-+	0xd3, 0x42, 0x47, 0x5a, 0x6d, 0x19, 0x27, 0x66,
-+	0x4b, 0x2e, 0x0c, 0x27, 0x9c, 0x96, 0x4c, 0x72,
-+	0x02, 0xa3, 0x65, 0xc3, 0xb3, 0x6f, 0x2e, 0xbd,
-+	0x63, 0x8a, 0x4a, 0x5d, 0x29, 0xa2, 0xd0, 0x28,
-+	0x48, 0xc5, 0x3d, 0x98, 0xa3, 0xbc, 0xe0, 0xbe,
-+	0x3b, 0x3f, 0xe6, 0x8a, 0xa4, 0x7f, 0x53, 0x06,
-+	0xfa, 0x7f, 0x27, 0x76, 0x72, 0x31, 0xa1, 0xf5,
-+	0xd6, 0x0c, 0x52, 0x47, 0xba, 0xcd, 0x4f, 0xd7,
-+	0xeb, 0x05, 0x48, 0x0d, 0x7c, 0x35, 0x4a, 0x09,
-+	0xc9, 0x76, 0x71, 0x02, 0xa3, 0xfb, 0xb7, 0x1a,
-+	0x65, 0xb7, 0xed, 0x98, 0xc6, 0x30, 0x8a, 0x00,
-+	0xae, 0xa1, 0x31, 0xe5, 0xb5, 0x9e, 0x6d, 0x62,
-+	0xda, 0xda, 0x07, 0x0f, 0x38, 0x38, 0xd3, 0xcb,
-+	0xc1, 0xb0, 0xad, 0xec, 0x72, 0xec, 0xb1, 0xa2,
-+	0x7b, 0x59, 0xf3, 0x3d, 0x2b, 0xef, 0xcd, 0x28,
-+	0x5b, 0x83, 0xcc, 0x18, 0x91, 0x88, 0xb0, 0x2e,
-+	0xf9, 0x29, 0x31, 0x18, 0xf9, 0x4e, 0xe9, 0x0a,
-+	0x91, 0x92, 0x9f, 0xae, 0x2d, 0xad, 0xf4, 0xe6,
-+	0x1a, 0xe2, 0xa4, 0xee, 0x47, 0x15, 0xbf, 0x83,
-+	0x6e, 0xd7, 0x72, 0x12, 0x3b, 0x2d, 0x24, 0xe9,
-+	0xb2, 0x55, 0xcb, 0x3c, 0x10, 0xf0, 0x24, 0x8a,
-+	0x4a, 0x02, 0xea, 0x90, 0x25, 0xf0, 0xb4, 0x79,
-+	0x3a, 0xef, 0x6e, 0xf5, 0x52, 0xdf, 0xb0, 0x0a,
-+	0xcd, 0x24, 0x1c, 0xd3, 0x2e, 0x22, 0x74, 0xea,
-+	0x21, 0x6f, 0xe9, 0xbd, 0xc8, 0x3e, 0x36, 0x5b,
-+	0x19, 0xf1, 0xca, 0x99, 0x0a, 0xb4, 0xa7, 0x52,
-+	0x1a, 0x4e, 0xf2, 0xad, 0x8d, 0x56, 0x85, 0xbb,
-+	0x64, 0x89, 0xba, 0x26, 0xf9, 0xc7, 0xe1, 0x89,
-+	0x19, 0x22, 0x77, 0xc3, 0xa8, 0xfc, 0xff, 0xad,
-+	0xfe, 0xb9, 0x48, 0xae, 0x12, 0x30, 0x9f, 0x19,
-+	0xfb, 0x1b, 0xef, 0x14, 0x87, 0x8a, 0x78, 0x71,
-+	0xf3, 0xf4, 0xb7, 0x00, 0x9c, 0x1d, 0xb5, 0x3d,
-+	0x49, 0x00, 0x0c, 0x06, 0xd4, 0x50, 0xf9, 0x54,
-+	0x45, 0xb2, 0x5b, 0x43, 0xdb, 0x6d, 0xcf, 0x1a,
-+	0xe9, 0x7a, 0x7a, 0xcf, 0xfc, 0x8a, 0x4e, 0x4d,
-+	0x0b, 0x07, 0x63, 0x28, 0xd8, 0xe7, 0x08, 0x95,
-+	0xdf, 0xa6, 0x72, 0x93, 0x2e, 0xbb, 0xa0, 0x42,
-+	0x89, 0x16, 0xf1, 0xd9, 0x0c, 0xf9, 0xa1, 0x16,
-+	0xfd, 0xd9, 0x03, 0xb4, 0x3b, 0x8a, 0xf5, 0xf6,
-+	0xe7, 0x6b, 0x2e, 0x8e, 0x4c, 0x3d, 0xe2, 0xaf,
-+	0x08, 0x45, 0x03, 0xff, 0x09, 0xb6, 0xeb, 0x2d,
-+	0xc6, 0x1b, 0x88, 0x94, 0xac, 0x3e, 0xf1, 0x9f,
-+	0x0e, 0x0e, 0x2b, 0xd5, 0x00, 0x4d, 0x3f, 0x3b,
-+	0x53, 0xae, 0xaf, 0x1c, 0x33, 0x5f, 0x55, 0x6e,
-+	0x8d, 0xaf, 0x05, 0x7a, 0x10, 0x34, 0xc9, 0xf4,
-+	0x66, 0xcb, 0x62, 0x12, 0xa6, 0xee, 0xe8, 0x1c,
-+	0x5d, 0x12, 0x86, 0xdb, 0x6f, 0x1c, 0x33, 0xc4,
-+	0x1c, 0xda, 0x82, 0x2d, 0x3b, 0x59, 0xfe, 0xb1,
-+	0xa4, 0x59, 0x41, 0x86, 0xd0, 0xef, 0xae, 0xfb,
-+	0xda, 0x6d, 0x11, 0xb8, 0xca, 0xe9, 0x6e, 0xff,
-+	0xf7, 0xa9, 0xd9, 0x70, 0x30, 0xfc, 0x53, 0xe2,
-+	0xd7, 0xa2, 0x4e, 0xc7, 0x91, 0xd9, 0x07, 0x06,
-+	0xaa, 0xdd, 0xb0, 0x59, 0x28, 0x1d, 0x00, 0x66,
-+	0xc5, 0x54, 0xc2, 0xfc, 0x06, 0xda, 0x05, 0x90,
-+	0x52, 0x1d, 0x37, 0x66, 0xee, 0xf0, 0xb2, 0x55,
-+	0x8a, 0x5d, 0xd2, 0x38, 0x86, 0x94, 0x9b, 0xfc,
-+	0x10, 0x4c, 0xa1, 0xb9, 0x64, 0x3e, 0x44, 0xb8,
-+	0x5f, 0xb0, 0x0c, 0xec, 0xe0, 0xc9, 0xe5, 0x62,
-+	0x75, 0x3f, 0x09, 0xd5, 0xf5, 0xd9, 0x26, 0xba,
-+	0x9e, 0xd2, 0xf4, 0xb9, 0x48, 0x0a, 0xbc, 0xa2,
-+	0xd6, 0x7c, 0x36, 0x11, 0x7d, 0x26, 0x81, 0x89,
-+	0xcf, 0xa4, 0xad, 0x73, 0x0e, 0xee, 0xcc, 0x06,
-+	0xa9, 0xdb, 0xb1, 0xfd, 0xfb, 0x09, 0x7f, 0x90,
-+	0x42, 0x37, 0x2f, 0xe1, 0x9c, 0x0f, 0x6f, 0xcf,
-+	0x43, 0xb5, 0xd9, 0x90, 0xe1, 0x85, 0xf5, 0xa8,
-+	0xae
-+};
-+static const u8 enc_assoc009[] __initconst = {
-+	0x5a, 0x27, 0xff, 0xeb, 0xdf, 0x84, 0xb2, 0x9e,
-+	0xef
-+};
-+static const u8 enc_nonce009[] __initconst = {
-+	0xef, 0x2d, 0x63, 0xee, 0x6b, 0x80, 0x8b, 0x78
-+};
-+static const u8 enc_key009[] __initconst = {
-+	0xea, 0xbc, 0x56, 0x99, 0xe3, 0x50, 0xff, 0xc5,
-+	0xcc, 0x1a, 0xd7, 0xc1, 0x57, 0x72, 0xea, 0x86,
-+	0x5b, 0x89, 0x88, 0x61, 0x3d, 0x2f, 0x9b, 0xb2,
-+	0xe7, 0x9c, 0xec, 0x74, 0x6e, 0x3e, 0xf4, 0x3b
-+};
-+
-+static const u8 enc_input010[] __initconst = {
-+	0x42, 0x93, 0xe4, 0xeb, 0x97, 0xb0, 0x57, 0xbf,
-+	0x1a, 0x8b, 0x1f, 0xe4, 0x5f, 0x36, 0x20, 0x3c,
-+	0xef, 0x0a, 0xa9, 0x48, 0x5f, 0x5f, 0x37, 0x22,
-+	0x3a, 0xde, 0xe3, 0xae, 0xbe, 0xad, 0x07, 0xcc,
-+	0xb1, 0xf6, 0xf5, 0xf9, 0x56, 0xdd, 0xe7, 0x16,
-+	0x1e, 0x7f, 0xdf, 0x7a, 0x9e, 0x75, 0xb7, 0xc7,
-+	0xbe, 0xbe, 0x8a, 0x36, 0x04, 0xc0, 0x10, 0xf4,
-+	0x95, 0x20, 0x03, 0xec, 0xdc, 0x05, 0xa1, 0x7d,
-+	0xc4, 0xa9, 0x2c, 0x82, 0xd0, 0xbc, 0x8b, 0xc5,
-+	0xc7, 0x45, 0x50, 0xf6, 0xa2, 0x1a, 0xb5, 0x46,
-+	0x3b, 0x73, 0x02, 0xa6, 0x83, 0x4b, 0x73, 0x82,
-+	0x58, 0x5e, 0x3b, 0x65, 0x2f, 0x0e, 0xfd, 0x2b,
-+	0x59, 0x16, 0xce, 0xa1, 0x60, 0x9c, 0xe8, 0x3a,
-+	0x99, 0xed, 0x8d, 0x5a, 0xcf, 0xf6, 0x83, 0xaf,
-+	0xba, 0xd7, 0x73, 0x73, 0x40, 0x97, 0x3d, 0xca,
-+	0xef, 0x07, 0x57, 0xe6, 0xd9, 0x70, 0x0e, 0x95,
-+	0xae, 0xa6, 0x8d, 0x04, 0xcc, 0xee, 0xf7, 0x09,
-+	0x31, 0x77, 0x12, 0xa3, 0x23, 0x97, 0x62, 0xb3,
-+	0x7b, 0x32, 0xfb, 0x80, 0x14, 0x48, 0x81, 0xc3,
-+	0xe5, 0xea, 0x91, 0x39, 0x52, 0x81, 0xa2, 0x4f,
-+	0xe4, 0xb3, 0x09, 0xff, 0xde, 0x5e, 0xe9, 0x58,
-+	0x84, 0x6e, 0xf9, 0x3d, 0xdf, 0x25, 0xea, 0xad,
-+	0xae, 0xe6, 0x9a, 0xd1, 0x89, 0x55, 0xd3, 0xde,
-+	0x6c, 0x52, 0xdb, 0x70, 0xfe, 0x37, 0xce, 0x44,
-+	0x0a, 0xa8, 0x25, 0x5f, 0x92, 0xc1, 0x33, 0x4a,
-+	0x4f, 0x9b, 0x62, 0x35, 0xff, 0xce, 0xc0, 0xa9,
-+	0x60, 0xce, 0x52, 0x00, 0x97, 0x51, 0x35, 0x26,
-+	0x2e, 0xb9, 0x36, 0xa9, 0x87, 0x6e, 0x1e, 0xcc,
-+	0x91, 0x78, 0x53, 0x98, 0x86, 0x5b, 0x9c, 0x74,
-+	0x7d, 0x88, 0x33, 0xe1, 0xdf, 0x37, 0x69, 0x2b,
-+	0xbb, 0xf1, 0x4d, 0xf4, 0xd1, 0xf1, 0x39, 0x93,
-+	0x17, 0x51, 0x19, 0xe3, 0x19, 0x1e, 0x76, 0x37,
-+	0x25, 0xfb, 0x09, 0x27, 0x6a, 0xab, 0x67, 0x6f,
-+	0x14, 0x12, 0x64, 0xe7, 0xc4, 0x07, 0xdf, 0x4d,
-+	0x17, 0xbb, 0x6d, 0xe0, 0xe9, 0xb9, 0xab, 0xca,
-+	0x10, 0x68, 0xaf, 0x7e, 0xb7, 0x33, 0x54, 0x73,
-+	0x07, 0x6e, 0xf7, 0x81, 0x97, 0x9c, 0x05, 0x6f,
-+	0x84, 0x5f, 0xd2, 0x42, 0xfb, 0x38, 0xcf, 0xd1,
-+	0x2f, 0x14, 0x30, 0x88, 0x98, 0x4d, 0x5a, 0xa9,
-+	0x76, 0xd5, 0x4f, 0x3e, 0x70, 0x6c, 0x85, 0x76,
-+	0xd7, 0x01, 0xa0, 0x1a, 0xc8, 0x4e, 0xaa, 0xac,
-+	0x78, 0xfe, 0x46, 0xde, 0x6a, 0x05, 0x46, 0xa7,
-+	0x43, 0x0c, 0xb9, 0xde, 0xb9, 0x68, 0xfb, 0xce,
-+	0x42, 0x99, 0x07, 0x4d, 0x0b, 0x3b, 0x5a, 0x30,
-+	0x35, 0xa8, 0xf9, 0x3a, 0x73, 0xef, 0x0f, 0xdb,
-+	0x1e, 0x16, 0x42, 0xc4, 0xba, 0xae, 0x58, 0xaa,
-+	0xf8, 0xe5, 0x75, 0x2f, 0x1b, 0x15, 0x5c, 0xfd,
-+	0x0a, 0x97, 0xd0, 0xe4, 0x37, 0x83, 0x61, 0x5f,
-+	0x43, 0xa6, 0xc7, 0x3f, 0x38, 0x59, 0xe6, 0xeb,
-+	0xa3, 0x90, 0xc3, 0xaa, 0xaa, 0x5a, 0xd3, 0x34,
-+	0xd4, 0x17, 0xc8, 0x65, 0x3e, 0x57, 0xbc, 0x5e,
-+	0xdd, 0x9e, 0xb7, 0xf0, 0x2e, 0x5b, 0xb2, 0x1f,
-+	0x8a, 0x08, 0x0d, 0x45, 0x91, 0x0b, 0x29, 0x53,
-+	0x4f, 0x4c, 0x5a, 0x73, 0x56, 0xfe, 0xaf, 0x41,
-+	0x01, 0x39, 0x0a, 0x24, 0x3c, 0x7e, 0xbe, 0x4e,
-+	0x53, 0xf3, 0xeb, 0x06, 0x66, 0x51, 0x28, 0x1d,
-+	0xbd, 0x41, 0x0a, 0x01, 0xab, 0x16, 0x47, 0x27,
-+	0x47, 0x47, 0xf7, 0xcb, 0x46, 0x0a, 0x70, 0x9e,
-+	0x01, 0x9c, 0x09, 0xe1, 0x2a, 0x00, 0x1a, 0xd8,
-+	0xd4, 0x79, 0x9d, 0x80, 0x15, 0x8e, 0x53, 0x2a,
-+	0x65, 0x83, 0x78, 0x3e, 0x03, 0x00, 0x07, 0x12,
-+	0x1f, 0x33, 0x3e, 0x7b, 0x13, 0x37, 0xf1, 0xc3,
-+	0xef, 0xb7, 0xc1, 0x20, 0x3c, 0x3e, 0x67, 0x66,
-+	0x5d, 0x88, 0xa7, 0x7d, 0x33, 0x50, 0x77, 0xb0,
-+	0x28, 0x8e, 0xe7, 0x2c, 0x2e, 0x7a, 0xf4, 0x3c,
-+	0x8d, 0x74, 0x83, 0xaf, 0x8e, 0x87, 0x0f, 0xe4,
-+	0x50, 0xff, 0x84, 0x5c, 0x47, 0x0c, 0x6a, 0x49,
-+	0xbf, 0x42, 0x86, 0x77, 0x15, 0x48, 0xa5, 0x90,
-+	0x5d, 0x93, 0xd6, 0x2a, 0x11, 0xd5, 0xd5, 0x11,
-+	0xaa, 0xce, 0xe7, 0x6f, 0xa5, 0xb0, 0x09, 0x2c,
-+	0x8d, 0xd3, 0x92, 0xf0, 0x5a, 0x2a, 0xda, 0x5b,
-+	0x1e, 0xd5, 0x9a, 0xc4, 0xc4, 0xf3, 0x49, 0x74,
-+	0x41, 0xca, 0xe8, 0xc1, 0xf8, 0x44, 0xd6, 0x3c,
-+	0xae, 0x6c, 0x1d, 0x9a, 0x30, 0x04, 0x4d, 0x27,
-+	0x0e, 0xb1, 0x5f, 0x59, 0xa2, 0x24, 0xe8, 0xe1,
-+	0x98, 0xc5, 0x6a, 0x4c, 0xfe, 0x41, 0xd2, 0x27,
-+	0x42, 0x52, 0xe1, 0xe9, 0x7d, 0x62, 0xe4, 0x88,
-+	0x0f, 0xad, 0xb2, 0x70, 0xcb, 0x9d, 0x4c, 0x27,
-+	0x2e, 0x76, 0x1e, 0x1a, 0x63, 0x65, 0xf5, 0x3b,
-+	0xf8, 0x57, 0x69, 0xeb, 0x5b, 0x38, 0x26, 0x39,
-+	0x33, 0x25, 0x45, 0x3e, 0x91, 0xb8, 0xd8, 0xc7,
-+	0xd5, 0x42, 0xc0, 0x22, 0x31, 0x74, 0xf4, 0xbc,
-+	0x0c, 0x23, 0xf1, 0xca, 0xc1, 0x8d, 0xd7, 0xbe,
-+	0xc9, 0x62, 0xe4, 0x08, 0x1a, 0xcf, 0x36, 0xd5,
-+	0xfe, 0x55, 0x21, 0x59, 0x91, 0x87, 0x87, 0xdf,
-+	0x06, 0xdb, 0xdf, 0x96, 0x45, 0x58, 0xda, 0x05,
-+	0xcd, 0x50, 0x4d, 0xd2, 0x7d, 0x05, 0x18, 0x73,
-+	0x6a, 0x8d, 0x11, 0x85, 0xa6, 0x88, 0xe8, 0xda,
-+	0xe6, 0x30, 0x33, 0xa4, 0x89, 0x31, 0x75, 0xbe,
-+	0x69, 0x43, 0x84, 0x43, 0x50, 0x87, 0xdd, 0x71,
-+	0x36, 0x83, 0xc3, 0x78, 0x74, 0x24, 0x0a, 0xed,
-+	0x7b, 0xdb, 0xa4, 0x24, 0x0b, 0xb9, 0x7e, 0x5d,
-+	0xff, 0xde, 0xb1, 0xef, 0x61, 0x5a, 0x45, 0x33,
-+	0xf6, 0x17, 0x07, 0x08, 0x98, 0x83, 0x92, 0x0f,
-+	0x23, 0x6d, 0xe6, 0xaa, 0x17, 0x54, 0xad, 0x6a,
-+	0xc8, 0xdb, 0x26, 0xbe, 0xb8, 0xb6, 0x08, 0xfa,
-+	0x68, 0xf1, 0xd7, 0x79, 0x6f, 0x18, 0xb4, 0x9e,
-+	0x2d, 0x3f, 0x1b, 0x64, 0xaf, 0x8d, 0x06, 0x0e,
-+	0x49, 0x28, 0xe0, 0x5d, 0x45, 0x68, 0x13, 0x87,
-+	0xfa, 0xde, 0x40, 0x7b, 0xd2, 0xc3, 0x94, 0xd5,
-+	0xe1, 0xd9, 0xc2, 0xaf, 0x55, 0x89, 0xeb, 0xb4,
-+	0x12, 0x59, 0xa8, 0xd4, 0xc5, 0x29, 0x66, 0x38,
-+	0xe6, 0xac, 0x22, 0x22, 0xd9, 0x64, 0x9b, 0x34,
-+	0x0a, 0x32, 0x9f, 0xc2, 0xbf, 0x17, 0x6c, 0x3f,
-+	0x71, 0x7a, 0x38, 0x6b, 0x98, 0xfb, 0x49, 0x36,
-+	0x89, 0xc9, 0xe2, 0xd6, 0xc7, 0x5d, 0xd0, 0x69,
-+	0x5f, 0x23, 0x35, 0xc9, 0x30, 0xe2, 0xfd, 0x44,
-+	0x58, 0x39, 0xd7, 0x97, 0xfb, 0x5c, 0x00, 0xd5,
-+	0x4f, 0x7a, 0x1a, 0x95, 0x8b, 0x62, 0x4b, 0xce,
-+	0xe5, 0x91, 0x21, 0x7b, 0x30, 0x00, 0xd6, 0xdd,
-+	0x6d, 0x02, 0x86, 0x49, 0x0f, 0x3c, 0x1a, 0x27,
-+	0x3c, 0xd3, 0x0e, 0x71, 0xf2, 0xff, 0xf5, 0x2f,
-+	0x87, 0xac, 0x67, 0x59, 0x81, 0xa3, 0xf7, 0xf8,
-+	0xd6, 0x11, 0x0c, 0x84, 0xa9, 0x03, 0xee, 0x2a,
-+	0xc4, 0xf3, 0x22, 0xab, 0x7c, 0xe2, 0x25, 0xf5,
-+	0x67, 0xa3, 0xe4, 0x11, 0xe0, 0x59, 0xb3, 0xca,
-+	0x87, 0xa0, 0xae, 0xc9, 0xa6, 0x62, 0x1b, 0x6e,
-+	0x4d, 0x02, 0x6b, 0x07, 0x9d, 0xfd, 0xd0, 0x92,
-+	0x06, 0xe1, 0xb2, 0x9a, 0x4a, 0x1f, 0x1f, 0x13,
-+	0x49, 0x99, 0x97, 0x08, 0xde, 0x7f, 0x98, 0xaf,
-+	0x51, 0x98, 0xee, 0x2c, 0xcb, 0xf0, 0x0b, 0xc6,
-+	0xb6, 0xb7, 0x2d, 0x9a, 0xb1, 0xac, 0xa6, 0xe3,
-+	0x15, 0x77, 0x9d, 0x6b, 0x1a, 0xe4, 0xfc, 0x8b,
-+	0xf2, 0x17, 0x59, 0x08, 0x04, 0x58, 0x81, 0x9d,
-+	0x1b, 0x1b, 0x69, 0x55, 0xc2, 0xb4, 0x3c, 0x1f,
-+	0x50, 0xf1, 0x7f, 0x77, 0x90, 0x4c, 0x66, 0x40,
-+	0x5a, 0xc0, 0x33, 0x1f, 0xcb, 0x05, 0x6d, 0x5c,
-+	0x06, 0x87, 0x52, 0xa2, 0x8f, 0x26, 0xd5, 0x4f
-+};
-+static const u8 enc_output010[] __initconst = {
-+	0xe5, 0x26, 0xa4, 0x3d, 0xbd, 0x33, 0xd0, 0x4b,
-+	0x6f, 0x05, 0xa7, 0x6e, 0x12, 0x7a, 0xd2, 0x74,
-+	0xa6, 0xdd, 0xbd, 0x95, 0xeb, 0xf9, 0xa4, 0xf1,
-+	0x59, 0x93, 0x91, 0x70, 0xd9, 0xfe, 0x9a, 0xcd,
-+	0x53, 0x1f, 0x3a, 0xab, 0xa6, 0x7c, 0x9f, 0xa6,
-+	0x9e, 0xbd, 0x99, 0xd9, 0xb5, 0x97, 0x44, 0xd5,
-+	0x14, 0x48, 0x4d, 0x9d, 0xc0, 0xd0, 0x05, 0x96,
-+	0xeb, 0x4c, 0x78, 0x55, 0x09, 0x08, 0x01, 0x02,
-+	0x30, 0x90, 0x7b, 0x96, 0x7a, 0x7b, 0x5f, 0x30,
-+	0x41, 0x24, 0xce, 0x68, 0x61, 0x49, 0x86, 0x57,
-+	0x82, 0xdd, 0x53, 0x1c, 0x51, 0x28, 0x2b, 0x53,
-+	0x6e, 0x2d, 0xc2, 0x20, 0x4c, 0xdd, 0x8f, 0x65,
-+	0x10, 0x20, 0x50, 0xdd, 0x9d, 0x50, 0xe5, 0x71,
-+	0x40, 0x53, 0x69, 0xfc, 0x77, 0x48, 0x11, 0xb9,
-+	0xde, 0xa4, 0x8d, 0x58, 0xe4, 0xa6, 0x1a, 0x18,
-+	0x47, 0x81, 0x7e, 0xfc, 0xdd, 0xf6, 0xef, 0xce,
-+	0x2f, 0x43, 0x68, 0xd6, 0x06, 0xe2, 0x74, 0x6a,
-+	0xad, 0x90, 0xf5, 0x37, 0xf3, 0x3d, 0x82, 0x69,
-+	0x40, 0xe9, 0x6b, 0xa7, 0x3d, 0xa8, 0x1e, 0xd2,
-+	0x02, 0x7c, 0xb7, 0x9b, 0xe4, 0xda, 0x8f, 0x95,
-+	0x06, 0xc5, 0xdf, 0x73, 0xa3, 0x20, 0x9a, 0x49,
-+	0xde, 0x9c, 0xbc, 0xee, 0x14, 0x3f, 0x81, 0x5e,
-+	0xf8, 0x3b, 0x59, 0x3c, 0xe1, 0x68, 0x12, 0x5a,
-+	0x3a, 0x76, 0x3a, 0x3f, 0xf7, 0x87, 0x33, 0x0a,
-+	0x01, 0xb8, 0xd4, 0xed, 0xb6, 0xbe, 0x94, 0x5e,
-+	0x70, 0x40, 0x56, 0x67, 0x1f, 0x50, 0x44, 0x19,
-+	0xce, 0x82, 0x70, 0x10, 0x87, 0x13, 0x20, 0x0b,
-+	0x4c, 0x5a, 0xb6, 0xf6, 0xa7, 0xae, 0x81, 0x75,
-+	0x01, 0x81, 0xe6, 0x4b, 0x57, 0x7c, 0xdd, 0x6d,
-+	0xf8, 0x1c, 0x29, 0x32, 0xf7, 0xda, 0x3c, 0x2d,
-+	0xf8, 0x9b, 0x25, 0x6e, 0x00, 0xb4, 0xf7, 0x2f,
-+	0xf7, 0x04, 0xf7, 0xa1, 0x56, 0xac, 0x4f, 0x1a,
-+	0x64, 0xb8, 0x47, 0x55, 0x18, 0x7b, 0x07, 0x4d,
-+	0xbd, 0x47, 0x24, 0x80, 0x5d, 0xa2, 0x70, 0xc5,
-+	0xdd, 0x8e, 0x82, 0xd4, 0xeb, 0xec, 0xb2, 0x0c,
-+	0x39, 0xd2, 0x97, 0xc1, 0xcb, 0xeb, 0xf4, 0x77,
-+	0x59, 0xb4, 0x87, 0xef, 0xcb, 0x43, 0x2d, 0x46,
-+	0x54, 0xd1, 0xa7, 0xd7, 0x15, 0x99, 0x0a, 0x43,
-+	0xa1, 0xe0, 0x99, 0x33, 0x71, 0xc1, 0xed, 0xfe,
-+	0x72, 0x46, 0x33, 0x8e, 0x91, 0x08, 0x9f, 0xc8,
-+	0x2e, 0xca, 0xfa, 0xdc, 0x59, 0xd5, 0xc3, 0x76,
-+	0x84, 0x9f, 0xa3, 0x37, 0x68, 0xc3, 0xf0, 0x47,
-+	0x2c, 0x68, 0xdb, 0x5e, 0xc3, 0x49, 0x4c, 0xe8,
-+	0x92, 0x85, 0xe2, 0x23, 0xd3, 0x3f, 0xad, 0x32,
-+	0xe5, 0x2b, 0x82, 0xd7, 0x8f, 0x99, 0x0a, 0x59,
-+	0x5c, 0x45, 0xd9, 0xb4, 0x51, 0x52, 0xc2, 0xae,
-+	0xbf, 0x80, 0xcf, 0xc9, 0xc9, 0x51, 0x24, 0x2a,
-+	0x3b, 0x3a, 0x4d, 0xae, 0xeb, 0xbd, 0x22, 0xc3,
-+	0x0e, 0x0f, 0x59, 0x25, 0x92, 0x17, 0xe9, 0x74,
-+	0xc7, 0x8b, 0x70, 0x70, 0x36, 0x55, 0x95, 0x75,
-+	0x4b, 0xad, 0x61, 0x2b, 0x09, 0xbc, 0x82, 0xf2,
-+	0x6e, 0x94, 0x43, 0xae, 0xc3, 0xd5, 0xcd, 0x8e,
-+	0xfe, 0x5b, 0x9a, 0x88, 0x43, 0x01, 0x75, 0xb2,
-+	0x23, 0x09, 0xf7, 0x89, 0x83, 0xe7, 0xfa, 0xf9,
-+	0xb4, 0x9b, 0xf8, 0xef, 0xbd, 0x1c, 0x92, 0xc1,
-+	0xda, 0x7e, 0xfe, 0x05, 0xba, 0x5a, 0xcd, 0x07,
-+	0x6a, 0x78, 0x9e, 0x5d, 0xfb, 0x11, 0x2f, 0x79,
-+	0x38, 0xb6, 0xc2, 0x5b, 0x6b, 0x51, 0xb4, 0x71,
-+	0xdd, 0xf7, 0x2a, 0xe4, 0xf4, 0x72, 0x76, 0xad,
-+	0xc2, 0xdd, 0x64, 0x5d, 0x79, 0xb6, 0xf5, 0x7a,
-+	0x77, 0x20, 0x05, 0x3d, 0x30, 0x06, 0xd4, 0x4c,
-+	0x0a, 0x2c, 0x98, 0x5a, 0xb9, 0xd4, 0x98, 0xa9,
-+	0x3f, 0xc6, 0x12, 0xea, 0x3b, 0x4b, 0xc5, 0x79,
-+	0x64, 0x63, 0x6b, 0x09, 0x54, 0x3b, 0x14, 0x27,
-+	0xba, 0x99, 0x80, 0xc8, 0x72, 0xa8, 0x12, 0x90,
-+	0x29, 0xba, 0x40, 0x54, 0x97, 0x2b, 0x7b, 0xfe,
-+	0xeb, 0xcd, 0x01, 0x05, 0x44, 0x72, 0xdb, 0x99,
-+	0xe4, 0x61, 0xc9, 0x69, 0xd6, 0xb9, 0x28, 0xd1,
-+	0x05, 0x3e, 0xf9, 0x0b, 0x49, 0x0a, 0x49, 0xe9,
-+	0x8d, 0x0e, 0xa7, 0x4a, 0x0f, 0xaf, 0x32, 0xd0,
-+	0xe0, 0xb2, 0x3a, 0x55, 0x58, 0xfe, 0x5c, 0x28,
-+	0x70, 0x51, 0x23, 0xb0, 0x7b, 0x6a, 0x5f, 0x1e,
-+	0xb8, 0x17, 0xd7, 0x94, 0x15, 0x8f, 0xee, 0x20,
-+	0xc7, 0x42, 0x25, 0x3e, 0x9a, 0x14, 0xd7, 0x60,
-+	0x72, 0x39, 0x47, 0x48, 0xa9, 0xfe, 0xdd, 0x47,
-+	0x0a, 0xb1, 0xe6, 0x60, 0x28, 0x8c, 0x11, 0x68,
-+	0xe1, 0xff, 0xd7, 0xce, 0xc8, 0xbe, 0xb3, 0xfe,
-+	0x27, 0x30, 0x09, 0x70, 0xd7, 0xfa, 0x02, 0x33,
-+	0x3a, 0x61, 0x2e, 0xc7, 0xff, 0xa4, 0x2a, 0xa8,
-+	0x6e, 0xb4, 0x79, 0x35, 0x6d, 0x4c, 0x1e, 0x38,
-+	0xf8, 0xee, 0xd4, 0x84, 0x4e, 0x6e, 0x28, 0xa7,
-+	0xce, 0xc8, 0xc1, 0xcf, 0x80, 0x05, 0xf3, 0x04,
-+	0xef, 0xc8, 0x18, 0x28, 0x2e, 0x8d, 0x5e, 0x0c,
-+	0xdf, 0xb8, 0x5f, 0x96, 0xe8, 0xc6, 0x9c, 0x2f,
-+	0xe5, 0xa6, 0x44, 0xd7, 0xe7, 0x99, 0x44, 0x0c,
-+	0xec, 0xd7, 0x05, 0x60, 0x97, 0xbb, 0x74, 0x77,
-+	0x58, 0xd5, 0xbb, 0x48, 0xde, 0x5a, 0xb2, 0x54,
-+	0x7f, 0x0e, 0x46, 0x70, 0x6a, 0x6f, 0x78, 0xa5,
-+	0x08, 0x89, 0x05, 0x4e, 0x7e, 0xa0, 0x69, 0xb4,
-+	0x40, 0x60, 0x55, 0x77, 0x75, 0x9b, 0x19, 0xf2,
-+	0xd5, 0x13, 0x80, 0x77, 0xf9, 0x4b, 0x3f, 0x1e,
-+	0xee, 0xe6, 0x76, 0x84, 0x7b, 0x8c, 0xe5, 0x27,
-+	0xa8, 0x0a, 0x91, 0x01, 0x68, 0x71, 0x8a, 0x3f,
-+	0x06, 0xab, 0xf6, 0xa9, 0xa5, 0xe6, 0x72, 0x92,
-+	0xe4, 0x67, 0xe2, 0xa2, 0x46, 0x35, 0x84, 0x55,
-+	0x7d, 0xca, 0xa8, 0x85, 0xd0, 0xf1, 0x3f, 0xbe,
-+	0xd7, 0x34, 0x64, 0xfc, 0xae, 0xe3, 0xe4, 0x04,
-+	0x9f, 0x66, 0x02, 0xb9, 0x88, 0x10, 0xd9, 0xc4,
-+	0x4c, 0x31, 0x43, 0x7a, 0x93, 0xe2, 0x9b, 0x56,
-+	0x43, 0x84, 0xdc, 0xdc, 0xde, 0x1d, 0xa4, 0x02,
-+	0x0e, 0xc2, 0xef, 0xc3, 0xf8, 0x78, 0xd1, 0xb2,
-+	0x6b, 0x63, 0x18, 0xc9, 0xa9, 0xe5, 0x72, 0xd8,
-+	0xf3, 0xb9, 0xd1, 0x8a, 0xc7, 0x1a, 0x02, 0x27,
-+	0x20, 0x77, 0x10, 0xe5, 0xc8, 0xd4, 0x4a, 0x47,
-+	0xe5, 0xdf, 0x5f, 0x01, 0xaa, 0xb0, 0xd4, 0x10,
-+	0xbb, 0x69, 0xe3, 0x36, 0xc8, 0xe1, 0x3d, 0x43,
-+	0xfb, 0x86, 0xcd, 0xcc, 0xbf, 0xf4, 0x88, 0xe0,
-+	0x20, 0xca, 0xb7, 0x1b, 0xf1, 0x2f, 0x5c, 0xee,
-+	0xd4, 0xd3, 0xa3, 0xcc, 0xa4, 0x1e, 0x1c, 0x47,
-+	0xfb, 0xbf, 0xfc, 0xa2, 0x41, 0x55, 0x9d, 0xf6,
-+	0x5a, 0x5e, 0x65, 0x32, 0x34, 0x7b, 0x52, 0x8d,
-+	0xd5, 0xd0, 0x20, 0x60, 0x03, 0xab, 0x3f, 0x8c,
-+	0xd4, 0x21, 0xea, 0x2a, 0xd9, 0xc4, 0xd0, 0xd3,
-+	0x65, 0xd8, 0x7a, 0x13, 0x28, 0x62, 0x32, 0x4b,
-+	0x2c, 0x87, 0x93, 0xa8, 0xb4, 0x52, 0x45, 0x09,
-+	0x44, 0xec, 0xec, 0xc3, 0x17, 0xdb, 0x9a, 0x4d,
-+	0x5c, 0xa9, 0x11, 0xd4, 0x7d, 0xaf, 0x9e, 0xf1,
-+	0x2d, 0xb2, 0x66, 0xc5, 0x1d, 0xed, 0xb7, 0xcd,
-+	0x0b, 0x25, 0x5e, 0x30, 0x47, 0x3f, 0x40, 0xf4,
-+	0xa1, 0xa0, 0x00, 0x94, 0x10, 0xc5, 0x6a, 0x63,
-+	0x1a, 0xd5, 0x88, 0x92, 0x8e, 0x82, 0x39, 0x87,
-+	0x3c, 0x78, 0x65, 0x58, 0x42, 0x75, 0x5b, 0xdd,
-+	0x77, 0x3e, 0x09, 0x4e, 0x76, 0x5b, 0xe6, 0x0e,
-+	0x4d, 0x38, 0xb2, 0xc0, 0xb8, 0x95, 0x01, 0x7a,
-+	0x10, 0xe0, 0xfb, 0x07, 0xf2, 0xab, 0x2d, 0x8c,
-+	0x32, 0xed, 0x2b, 0xc0, 0x46, 0xc2, 0xf5, 0x38,
-+	0x83, 0xf0, 0x17, 0xec, 0xc1, 0x20, 0x6a, 0x9a,
-+	0x0b, 0x00, 0xa0, 0x98, 0x22, 0x50, 0x23, 0xd5,
-+	0x80, 0x6b, 0xf6, 0x1f, 0xc3, 0xcc, 0x97, 0xc9,
-+	0x24, 0x9f, 0xf3, 0xaf, 0x43, 0x14, 0xd5, 0xa0
-+};
-+static const u8 enc_assoc010[] __initconst = {
-+	0xd2, 0xa1, 0x70, 0xdb, 0x7a, 0xf8, 0xfa, 0x27,
-+	0xba, 0x73, 0x0f, 0xbf, 0x3d, 0x1e, 0x82, 0xb2
-+};
-+static const u8 enc_nonce010[] __initconst = {
-+	0xdb, 0x92, 0x0f, 0x7f, 0x17, 0x54, 0x0c, 0x30
-+};
-+static const u8 enc_key010[] __initconst = {
-+	0x47, 0x11, 0xeb, 0x86, 0x2b, 0x2c, 0xab, 0x44,
-+	0x34, 0xda, 0x7f, 0x57, 0x03, 0x39, 0x0c, 0xaf,
-+	0x2c, 0x14, 0xfd, 0x65, 0x23, 0xe9, 0x8e, 0x74,
-+	0xd5, 0x08, 0x68, 0x08, 0xe7, 0xb4, 0x72, 0xd7
-+};
-+
-+static const u8 enc_input011[] __initconst = {
-+	0x7a, 0x57, 0xf2, 0xc7, 0x06, 0x3f, 0x50, 0x7b,
-+	0x36, 0x1a, 0x66, 0x5c, 0xb9, 0x0e, 0x5e, 0x3b,
-+	0x45, 0x60, 0xbe, 0x9a, 0x31, 0x9f, 0xff, 0x5d,
-+	0x66, 0x34, 0xb4, 0xdc, 0xfb, 0x9d, 0x8e, 0xee,
-+	0x6a, 0x33, 0xa4, 0x07, 0x3c, 0xf9, 0x4c, 0x30,
-+	0xa1, 0x24, 0x52, 0xf9, 0x50, 0x46, 0x88, 0x20,
-+	0x02, 0x32, 0x3a, 0x0e, 0x99, 0x63, 0xaf, 0x1f,
-+	0x15, 0x28, 0x2a, 0x05, 0xff, 0x57, 0x59, 0x5e,
-+	0x18, 0xa1, 0x1f, 0xd0, 0x92, 0x5c, 0x88, 0x66,
-+	0x1b, 0x00, 0x64, 0xa5, 0x93, 0x8d, 0x06, 0x46,
-+	0xb0, 0x64, 0x8b, 0x8b, 0xef, 0x99, 0x05, 0x35,
-+	0x85, 0xb3, 0xf3, 0x33, 0xbb, 0xec, 0x66, 0xb6,
-+	0x3d, 0x57, 0x42, 0xe3, 0xb4, 0xc6, 0xaa, 0xb0,
-+	0x41, 0x2a, 0xb9, 0x59, 0xa9, 0xf6, 0x3e, 0x15,
-+	0x26, 0x12, 0x03, 0x21, 0x4c, 0x74, 0x43, 0x13,
-+	0x2a, 0x03, 0x27, 0x09, 0xb4, 0xfb, 0xe7, 0xb7,
-+	0x40, 0xff, 0x5e, 0xce, 0x48, 0x9a, 0x60, 0xe3,
-+	0x8b, 0x80, 0x8c, 0x38, 0x2d, 0xcb, 0x93, 0x37,
-+	0x74, 0x05, 0x52, 0x6f, 0x73, 0x3e, 0xc3, 0xbc,
-+	0xca, 0x72, 0x0a, 0xeb, 0xf1, 0x3b, 0xa0, 0x95,
-+	0xdc, 0x8a, 0xc4, 0xa9, 0xdc, 0xca, 0x44, 0xd8,
-+	0x08, 0x63, 0x6a, 0x36, 0xd3, 0x3c, 0xb8, 0xac,
-+	0x46, 0x7d, 0xfd, 0xaa, 0xeb, 0x3e, 0x0f, 0x45,
-+	0x8f, 0x49, 0xda, 0x2b, 0xf2, 0x12, 0xbd, 0xaf,
-+	0x67, 0x8a, 0x63, 0x48, 0x4b, 0x55, 0x5f, 0x6d,
-+	0x8c, 0xb9, 0x76, 0x34, 0x84, 0xae, 0xc2, 0xfc,
-+	0x52, 0x64, 0x82, 0xf7, 0xb0, 0x06, 0xf0, 0x45,
-+	0x73, 0x12, 0x50, 0x30, 0x72, 0xea, 0x78, 0x9a,
-+	0xa8, 0xaf, 0xb5, 0xe3, 0xbb, 0x77, 0x52, 0xec,
-+	0x59, 0x84, 0xbf, 0x6b, 0x8f, 0xce, 0x86, 0x5e,
-+	0x1f, 0x23, 0xe9, 0xfb, 0x08, 0x86, 0xf7, 0x10,
-+	0xb9, 0xf2, 0x44, 0x96, 0x44, 0x63, 0xa9, 0xa8,
-+	0x78, 0x00, 0x23, 0xd6, 0xc7, 0xe7, 0x6e, 0x66,
-+	0x4f, 0xcc, 0xee, 0x15, 0xb3, 0xbd, 0x1d, 0xa0,
-+	0xe5, 0x9c, 0x1b, 0x24, 0x2c, 0x4d, 0x3c, 0x62,
-+	0x35, 0x9c, 0x88, 0x59, 0x09, 0xdd, 0x82, 0x1b,
-+	0xcf, 0x0a, 0x83, 0x6b, 0x3f, 0xae, 0x03, 0xc4,
-+	0xb4, 0xdd, 0x7e, 0x5b, 0x28, 0x76, 0x25, 0x96,
-+	0xd9, 0xc9, 0x9d, 0x5f, 0x86, 0xfa, 0xf6, 0xd7,
-+	0xd2, 0xe6, 0x76, 0x1d, 0x0f, 0xa1, 0xdc, 0x74,
-+	0x05, 0x1b, 0x1d, 0xe0, 0xcd, 0x16, 0xb0, 0xa8,
-+	0x8a, 0x34, 0x7b, 0x15, 0x11, 0x77, 0xe5, 0x7b,
-+	0x7e, 0x20, 0xf7, 0xda, 0x38, 0xda, 0xce, 0x70,
-+	0xe9, 0xf5, 0x6c, 0xd9, 0xbe, 0x0c, 0x4c, 0x95,
-+	0x4c, 0xc2, 0x9b, 0x34, 0x55, 0x55, 0xe1, 0xf3,
-+	0x46, 0x8e, 0x48, 0x74, 0x14, 0x4f, 0x9d, 0xc9,
-+	0xf5, 0xe8, 0x1a, 0xf0, 0x11, 0x4a, 0xc1, 0x8d,
-+	0xe0, 0x93, 0xa0, 0xbe, 0x09, 0x1c, 0x2b, 0x4e,
-+	0x0f, 0xb2, 0x87, 0x8b, 0x84, 0xfe, 0x92, 0x32,
-+	0x14, 0xd7, 0x93, 0xdf, 0xe7, 0x44, 0xbc, 0xc5,
-+	0xae, 0x53, 0x69, 0xd8, 0xb3, 0x79, 0x37, 0x80,
-+	0xe3, 0x17, 0x5c, 0xec, 0x53, 0x00, 0x9a, 0xe3,
-+	0x8e, 0xdc, 0x38, 0xb8, 0x66, 0xf0, 0xd3, 0xad,
-+	0x1d, 0x02, 0x96, 0x86, 0x3e, 0x9d, 0x3b, 0x5d,
-+	0xa5, 0x7f, 0x21, 0x10, 0xf1, 0x1f, 0x13, 0x20,
-+	0xf9, 0x57, 0x87, 0x20, 0xf5, 0x5f, 0xf1, 0x17,
-+	0x48, 0x0a, 0x51, 0x5a, 0xcd, 0x19, 0x03, 0xa6,
-+	0x5a, 0xd1, 0x12, 0x97, 0xe9, 0x48, 0xe2, 0x1d,
-+	0x83, 0x75, 0x50, 0xd9, 0x75, 0x7d, 0x6a, 0x82,
-+	0xa1, 0xf9, 0x4e, 0x54, 0x87, 0x89, 0xc9, 0x0c,
-+	0xb7, 0x5b, 0x6a, 0x91, 0xc1, 0x9c, 0xb2, 0xa9,
-+	0xdc, 0x9a, 0xa4, 0x49, 0x0a, 0x6d, 0x0d, 0xbb,
-+	0xde, 0x86, 0x44, 0xdd, 0x5d, 0x89, 0x2b, 0x96,
-+	0x0f, 0x23, 0x95, 0xad, 0xcc, 0xa2, 0xb3, 0xb9,
-+	0x7e, 0x74, 0x38, 0xba, 0x9f, 0x73, 0xae, 0x5f,
-+	0xf8, 0x68, 0xa2, 0xe0, 0xa9, 0xce, 0xbd, 0x40,
-+	0xd4, 0x4c, 0x6b, 0xd2, 0x56, 0x62, 0xb0, 0xcc,
-+	0x63, 0x7e, 0x5b, 0xd3, 0xae, 0xd1, 0x75, 0xce,
-+	0xbb, 0xb4, 0x5b, 0xa8, 0xf8, 0xb4, 0xac, 0x71,
-+	0x75, 0xaa, 0xc9, 0x9f, 0xbb, 0x6c, 0xad, 0x0f,
-+	0x55, 0x5d, 0xe8, 0x85, 0x7d, 0xf9, 0x21, 0x35,
-+	0xea, 0x92, 0x85, 0x2b, 0x00, 0xec, 0x84, 0x90,
-+	0x0a, 0x63, 0x96, 0xe4, 0x6b, 0xa9, 0x77, 0xb8,
-+	0x91, 0xf8, 0x46, 0x15, 0x72, 0x63, 0x70, 0x01,
-+	0x40, 0xa3, 0xa5, 0x76, 0x62, 0x2b, 0xbf, 0xf1,
-+	0xe5, 0x8d, 0x9f, 0xa3, 0xfa, 0x9b, 0x03, 0xbe,
-+	0xfe, 0x65, 0x6f, 0xa2, 0x29, 0x0d, 0x54, 0xb4,
-+	0x71, 0xce, 0xa9, 0xd6, 0x3d, 0x88, 0xf9, 0xaf,
-+	0x6b, 0xa8, 0x9e, 0xf4, 0x16, 0x96, 0x36, 0xb9,
-+	0x00, 0xdc, 0x10, 0xab, 0xb5, 0x08, 0x31, 0x1f,
-+	0x00, 0xb1, 0x3c, 0xd9, 0x38, 0x3e, 0xc6, 0x04,
-+	0xa7, 0x4e, 0xe8, 0xae, 0xed, 0x98, 0xc2, 0xf7,
-+	0xb9, 0x00, 0x5f, 0x8c, 0x60, 0xd1, 0xe5, 0x15,
-+	0xf7, 0xae, 0x1e, 0x84, 0x88, 0xd1, 0xf6, 0xbc,
-+	0x3a, 0x89, 0x35, 0x22, 0x83, 0x7c, 0xca, 0xf0,
-+	0x33, 0x82, 0x4c, 0x79, 0x3c, 0xfd, 0xb1, 0xae,
-+	0x52, 0x62, 0x55, 0xd2, 0x41, 0x60, 0xc6, 0xbb,
-+	0xfa, 0x0e, 0x59, 0xd6, 0xa8, 0xfe, 0x5d, 0xed,
-+	0x47, 0x3d, 0xe0, 0xea, 0x1f, 0x6e, 0x43, 0x51,
-+	0xec, 0x10, 0x52, 0x56, 0x77, 0x42, 0x6b, 0x52,
-+	0x87, 0xd8, 0xec, 0xe0, 0xaa, 0x76, 0xa5, 0x84,
-+	0x2a, 0x22, 0x24, 0xfd, 0x92, 0x40, 0x88, 0xd5,
-+	0x85, 0x1c, 0x1f, 0x6b, 0x47, 0xa0, 0xc4, 0xe4,
-+	0xef, 0xf4, 0xea, 0xd7, 0x59, 0xac, 0x2a, 0x9e,
-+	0x8c, 0xfa, 0x1f, 0x42, 0x08, 0xfe, 0x4f, 0x74,
-+	0xa0, 0x26, 0xf5, 0xb3, 0x84, 0xf6, 0x58, 0x5f,
-+	0x26, 0x66, 0x3e, 0xd7, 0xe4, 0x22, 0x91, 0x13,
-+	0xc8, 0xac, 0x25, 0x96, 0x23, 0xd8, 0x09, 0xea,
-+	0x45, 0x75, 0x23, 0xb8, 0x5f, 0xc2, 0x90, 0x8b,
-+	0x09, 0xc4, 0xfc, 0x47, 0x6c, 0x6d, 0x0a, 0xef,
-+	0x69, 0xa4, 0x38, 0x19, 0xcf, 0x7d, 0xf9, 0x09,
-+	0x73, 0x9b, 0x60, 0x5a, 0xf7, 0x37, 0xb5, 0xfe,
-+	0x9f, 0xe3, 0x2b, 0x4c, 0x0d, 0x6e, 0x19, 0xf1,
-+	0xd6, 0xc0, 0x70, 0xf3, 0x9d, 0x22, 0x3c, 0xf9,
-+	0x49, 0xce, 0x30, 0x8e, 0x44, 0xb5, 0x76, 0x15,
-+	0x8f, 0x52, 0xfd, 0xa5, 0x04, 0xb8, 0x55, 0x6a,
-+	0x36, 0x59, 0x7c, 0xc4, 0x48, 0xb8, 0xd7, 0xab,
-+	0x05, 0x66, 0xe9, 0x5e, 0x21, 0x6f, 0x6b, 0x36,
-+	0x29, 0xbb, 0xe9, 0xe3, 0xa2, 0x9a, 0xa8, 0xcd,
-+	0x55, 0x25, 0x11, 0xba, 0x5a, 0x58, 0xa0, 0xde,
-+	0xae, 0x19, 0x2a, 0x48, 0x5a, 0xff, 0x36, 0xcd,
-+	0x6d, 0x16, 0x7a, 0x73, 0x38, 0x46, 0xe5, 0x47,
-+	0x59, 0xc8, 0xa2, 0xf6, 0xe2, 0x6c, 0x83, 0xc5,
-+	0x36, 0x2c, 0x83, 0x7d, 0xb4, 0x01, 0x05, 0x69,
-+	0xe7, 0xaf, 0x5c, 0xc4, 0x64, 0x82, 0x12, 0x21,
-+	0xef, 0xf7, 0xd1, 0x7d, 0xb8, 0x8d, 0x8c, 0x98,
-+	0x7c, 0x5f, 0x7d, 0x92, 0x88, 0xb9, 0x94, 0x07,
-+	0x9c, 0xd8, 0xe9, 0x9c, 0x17, 0x38, 0xe3, 0x57,
-+	0x6c, 0xe0, 0xdc, 0xa5, 0x92, 0x42, 0xb3, 0xbd,
-+	0x50, 0xa2, 0x7e, 0xb5, 0xb1, 0x52, 0x72, 0x03,
-+	0x97, 0xd8, 0xaa, 0x9a, 0x1e, 0x75, 0x41, 0x11,
-+	0xa3, 0x4f, 0xcc, 0xd4, 0xe3, 0x73, 0xad, 0x96,
-+	0xdc, 0x47, 0x41, 0x9f, 0xb0, 0xbe, 0x79, 0x91,
-+	0xf5, 0xb6, 0x18, 0xfe, 0xc2, 0x83, 0x18, 0x7d,
-+	0x73, 0xd9, 0x4f, 0x83, 0x84, 0x03, 0xb3, 0xf0,
-+	0x77, 0x66, 0x3d, 0x83, 0x63, 0x2e, 0x2c, 0xf9,
-+	0xdd, 0xa6, 0x1f, 0x89, 0x82, 0xb8, 0x23, 0x42,
-+	0xeb, 0xe2, 0xca, 0x70, 0x82, 0x61, 0x41, 0x0a,
-+	0x6d, 0x5f, 0x75, 0xc5, 0xe2, 0xc4, 0x91, 0x18,
-+	0x44, 0x22, 0xfa, 0x34, 0x10, 0xf5, 0x20, 0xdc,
-+	0xb7, 0xdd, 0x2a, 0x20, 0x77, 0xf5, 0xf9, 0xce,
-+	0xdb, 0xa0, 0x0a, 0x52, 0x2a, 0x4e, 0xdd, 0xcc,
-+	0x97, 0xdf, 0x05, 0xe4, 0x5e, 0xb7, 0xaa, 0xf0,
-+	0xe2, 0x80, 0xff, 0xba, 0x1a, 0x0f, 0xac, 0xdf,
-+	0x02, 0x32, 0xe6, 0xf7, 0xc7, 0x17, 0x13, 0xb7,
-+	0xfc, 0x98, 0x48, 0x8c, 0x0d, 0x82, 0xc9, 0x80,
-+	0x7a, 0xe2, 0x0a, 0xc5, 0xb4, 0xde, 0x7c, 0x3c,
-+	0x79, 0x81, 0x0e, 0x28, 0x65, 0x79, 0x67, 0x82,
-+	0x69, 0x44, 0x66, 0x09, 0xf7, 0x16, 0x1a, 0xf9,
-+	0x7d, 0x80, 0xa1, 0x79, 0x14, 0xa9, 0xc8, 0x20,
-+	0xfb, 0xa2, 0x46, 0xbe, 0x08, 0x35, 0x17, 0x58,
-+	0xc1, 0x1a, 0xda, 0x2a, 0x6b, 0x2e, 0x1e, 0xe6,
-+	0x27, 0x55, 0x7b, 0x19, 0xe2, 0xfb, 0x64, 0xfc,
-+	0x5e, 0x15, 0x54, 0x3c, 0xe7, 0xc2, 0x11, 0x50,
-+	0x30, 0xb8, 0x72, 0x03, 0x0b, 0x1a, 0x9f, 0x86,
-+	0x27, 0x11, 0x5c, 0x06, 0x2b, 0xbd, 0x75, 0x1a,
-+	0x0a, 0xda, 0x01, 0xfa, 0x5c, 0x4a, 0xc1, 0x80,
-+	0x3a, 0x6e, 0x30, 0xc8, 0x2c, 0xeb, 0x56, 0xec,
-+	0x89, 0xfa, 0x35, 0x7b, 0xb2, 0xf0, 0x97, 0x08,
-+	0x86, 0x53, 0xbe, 0xbd, 0x40, 0x41, 0x38, 0x1c,
-+	0xb4, 0x8b, 0x79, 0x2e, 0x18, 0x96, 0x94, 0xde,
-+	0xe8, 0xca, 0xe5, 0x9f, 0x92, 0x9f, 0x15, 0x5d,
-+	0x56, 0x60, 0x5c, 0x09, 0xf9, 0x16, 0xf4, 0x17,
-+	0x0f, 0xf6, 0x4c, 0xda, 0xe6, 0x67, 0x89, 0x9f,
-+	0xca, 0x6c, 0xe7, 0x9b, 0x04, 0x62, 0x0e, 0x26,
-+	0xa6, 0x52, 0xbd, 0x29, 0xff, 0xc7, 0xa4, 0x96,
-+	0xe6, 0x6a, 0x02, 0xa5, 0x2e, 0x7b, 0xfe, 0x97,
-+	0x68, 0x3e, 0x2e, 0x5f, 0x3b, 0x0f, 0x36, 0xd6,
-+	0x98, 0x19, 0x59, 0x48, 0xd2, 0xc6, 0xe1, 0x55,
-+	0x1a, 0x6e, 0xd6, 0xed, 0x2c, 0xba, 0xc3, 0x9e,
-+	0x64, 0xc9, 0x95, 0x86, 0x35, 0x5e, 0x3e, 0x88,
-+	0x69, 0x99, 0x4b, 0xee, 0xbe, 0x9a, 0x99, 0xb5,
-+	0x6e, 0x58, 0xae, 0xdd, 0x22, 0xdb, 0xdd, 0x6b,
-+	0xfc, 0xaf, 0x90, 0xa3, 0x3d, 0xa4, 0xc1, 0x15,
-+	0x92, 0x18, 0x8d, 0xd2, 0x4b, 0x7b, 0x06, 0xd1,
-+	0x37, 0xb5, 0xe2, 0x7c, 0x2c, 0xf0, 0x25, 0xe4,
-+	0x94, 0x2a, 0xbd, 0xe3, 0x82, 0x70, 0x78, 0xa3,
-+	0x82, 0x10, 0x5a, 0x90, 0xd7, 0xa4, 0xfa, 0xaf,
-+	0x1a, 0x88, 0x59, 0xdc, 0x74, 0x12, 0xb4, 0x8e,
-+	0xd7, 0x19, 0x46, 0xf4, 0x84, 0x69, 0x9f, 0xbb,
-+	0x70, 0xa8, 0x4c, 0x52, 0x81, 0xa9, 0xff, 0x76,
-+	0x1c, 0xae, 0xd8, 0x11, 0x3d, 0x7f, 0x7d, 0xc5,
-+	0x12, 0x59, 0x28, 0x18, 0xc2, 0xa2, 0xb7, 0x1c,
-+	0x88, 0xf8, 0xd6, 0x1b, 0xa6, 0x7d, 0x9e, 0xde,
-+	0x29, 0xf8, 0xed, 0xff, 0xeb, 0x92, 0x24, 0x4f,
-+	0x05, 0xaa, 0xd9, 0x49, 0xba, 0x87, 0x59, 0x51,
-+	0xc9, 0x20, 0x5c, 0x9b, 0x74, 0xcf, 0x03, 0xd9,
-+	0x2d, 0x34, 0xc7, 0x5b, 0xa5, 0x40, 0xb2, 0x99,
-+	0xf5, 0xcb, 0xb4, 0xf6, 0xb7, 0x72, 0x4a, 0xd6,
-+	0xbd, 0xb0, 0xf3, 0x93, 0xe0, 0x1b, 0xa8, 0x04,
-+	0x1e, 0x35, 0xd4, 0x80, 0x20, 0xf4, 0x9c, 0x31,
-+	0x6b, 0x45, 0xb9, 0x15, 0xb0, 0x5e, 0xdd, 0x0a,
-+	0x33, 0x9c, 0x83, 0xcd, 0x58, 0x89, 0x50, 0x56,
-+	0xbb, 0x81, 0x00, 0x91, 0x32, 0xf3, 0x1b, 0x3e,
-+	0xcf, 0x45, 0xe1, 0xf9, 0xe1, 0x2c, 0x26, 0x78,
-+	0x93, 0x9a, 0x60, 0x46, 0xc9, 0xb5, 0x5e, 0x6a,
-+	0x28, 0x92, 0x87, 0x3f, 0x63, 0x7b, 0xdb, 0xf7,
-+	0xd0, 0x13, 0x9d, 0x32, 0x40, 0x5e, 0xcf, 0xfb,
-+	0x79, 0x68, 0x47, 0x4c, 0xfd, 0x01, 0x17, 0xe6,
-+	0x97, 0x93, 0x78, 0xbb, 0xa6, 0x27, 0xa3, 0xe8,
-+	0x1a, 0xe8, 0x94, 0x55, 0x7d, 0x08, 0xe5, 0xdc,
-+	0x66, 0xa3, 0x69, 0xc8, 0xca, 0xc5, 0xa1, 0x84,
-+	0x55, 0xde, 0x08, 0x91, 0x16, 0x3a, 0x0c, 0x86,
-+	0xab, 0x27, 0x2b, 0x64, 0x34, 0x02, 0x6c, 0x76,
-+	0x8b, 0xc6, 0xaf, 0xcc, 0xe1, 0xd6, 0x8c, 0x2a,
-+	0x18, 0x3d, 0xa6, 0x1b, 0x37, 0x75, 0x45, 0x73,
-+	0xc2, 0x75, 0xd7, 0x53, 0x78, 0x3a, 0xd6, 0xe8,
-+	0x29, 0xd2, 0x4a, 0xa8, 0x1e, 0x82, 0xf6, 0xb6,
-+	0x81, 0xde, 0x21, 0xed, 0x2b, 0x56, 0xbb, 0xf2,
-+	0xd0, 0x57, 0xc1, 0x7c, 0xd2, 0x6a, 0xd2, 0x56,
-+	0xf5, 0x13, 0x5f, 0x1c, 0x6a, 0x0b, 0x74, 0xfb,
-+	0xe9, 0xfe, 0x9e, 0xea, 0x95, 0xb2, 0x46, 0xab,
-+	0x0a, 0xfc, 0xfd, 0xf3, 0xbb, 0x04, 0x2b, 0x76,
-+	0x1b, 0xa4, 0x74, 0xb0, 0xc1, 0x78, 0xc3, 0x69,
-+	0xe2, 0xb0, 0x01, 0xe1, 0xde, 0x32, 0x4c, 0x8d,
-+	0x1a, 0xb3, 0x38, 0x08, 0xd5, 0xfc, 0x1f, 0xdc,
-+	0x0e, 0x2c, 0x9c, 0xb1, 0xa1, 0x63, 0x17, 0x22,
-+	0xf5, 0x6c, 0x93, 0x70, 0x74, 0x00, 0xf8, 0x39,
-+	0x01, 0x94, 0xd1, 0x32, 0x23, 0x56, 0x5d, 0xa6,
-+	0x02, 0x76, 0x76, 0x93, 0xce, 0x2f, 0x19, 0xe9,
-+	0x17, 0x52, 0xae, 0x6e, 0x2c, 0x6d, 0x61, 0x7f,
-+	0x3b, 0xaa, 0xe0, 0x52, 0x85, 0xc5, 0x65, 0xc1,
-+	0xbb, 0x8e, 0x5b, 0x21, 0xd5, 0xc9, 0x78, 0x83,
-+	0x07, 0x97, 0x4c, 0x62, 0x61, 0x41, 0xd4, 0xfc,
-+	0xc9, 0x39, 0xe3, 0x9b, 0xd0, 0xcc, 0x75, 0xc4,
-+	0x97, 0xe6, 0xdd, 0x2a, 0x5f, 0xa6, 0xe8, 0x59,
-+	0x6c, 0x98, 0xb9, 0x02, 0xe2, 0xa2, 0xd6, 0x68,
-+	0xee, 0x3b, 0x1d, 0xe3, 0x4d, 0x5b, 0x30, 0xef,
-+	0x03, 0xf2, 0xeb, 0x18, 0x57, 0x36, 0xe8, 0xa1,
-+	0xf4, 0x47, 0xfb, 0xcb, 0x8f, 0xcb, 0xc8, 0xf3,
-+	0x4f, 0x74, 0x9d, 0x9d, 0xb1, 0x8d, 0x14, 0x44,
-+	0xd9, 0x19, 0xb4, 0x54, 0x4f, 0x75, 0x19, 0x09,
-+	0xa0, 0x75, 0xbc, 0x3b, 0x82, 0xc6, 0x3f, 0xb8,
-+	0x83, 0x19, 0x6e, 0xd6, 0x37, 0xfe, 0x6e, 0x8a,
-+	0x4e, 0xe0, 0x4a, 0xab, 0x7b, 0xc8, 0xb4, 0x1d,
-+	0xf4, 0xed, 0x27, 0x03, 0x65, 0xa2, 0xa1, 0xae,
-+	0x11, 0xe7, 0x98, 0x78, 0x48, 0x91, 0xd2, 0xd2,
-+	0xd4, 0x23, 0x78, 0x50, 0xb1, 0x5b, 0x85, 0x10,
-+	0x8d, 0xca, 0x5f, 0x0f, 0x71, 0xae, 0x72, 0x9a,
-+	0xf6, 0x25, 0x19, 0x60, 0x06, 0xf7, 0x10, 0x34,
-+	0x18, 0x0d, 0xc9, 0x9f, 0x7b, 0x0c, 0x9b, 0x8f,
-+	0x91, 0x1b, 0x9f, 0xcd, 0x10, 0xee, 0x75, 0xf9,
-+	0x97, 0x66, 0xfc, 0x4d, 0x33, 0x6e, 0x28, 0x2b,
-+	0x92, 0x85, 0x4f, 0xab, 0x43, 0x8d, 0x8f, 0x7d,
-+	0x86, 0xa7, 0xc7, 0xd8, 0xd3, 0x0b, 0x8b, 0x57,
-+	0xb6, 0x1d, 0x95, 0x0d, 0xe9, 0xbc, 0xd9, 0x03,
-+	0xd9, 0x10, 0x19, 0xc3, 0x46, 0x63, 0x55, 0x87,
-+	0x61, 0x79, 0x6c, 0x95, 0x0e, 0x9c, 0xdd, 0xca,
-+	0xc3, 0xf3, 0x64, 0xf0, 0x7d, 0x76, 0xb7, 0x53,
-+	0x67, 0x2b, 0x1e, 0x44, 0x56, 0x81, 0xea, 0x8f,
-+	0x5c, 0x42, 0x16, 0xb8, 0x28, 0xeb, 0x1b, 0x61,
-+	0x10, 0x1e, 0xbf, 0xec, 0xa8
-+};
-+static const u8 enc_output011[] __initconst = {
-+	0x6a, 0xfc, 0x4b, 0x25, 0xdf, 0xc0, 0xe4, 0xe8,
-+	0x17, 0x4d, 0x4c, 0xc9, 0x7e, 0xde, 0x3a, 0xcc,
-+	0x3c, 0xba, 0x6a, 0x77, 0x47, 0xdb, 0xe3, 0x74,
-+	0x7a, 0x4d, 0x5f, 0x8d, 0x37, 0x55, 0x80, 0x73,
-+	0x90, 0x66, 0x5d, 0x3a, 0x7d, 0x5d, 0x86, 0x5e,
-+	0x8d, 0xfd, 0x83, 0xff, 0x4e, 0x74, 0x6f, 0xf9,
-+	0xe6, 0x70, 0x17, 0x70, 0x3e, 0x96, 0xa7, 0x7e,
-+	0xcb, 0xab, 0x8f, 0x58, 0x24, 0x9b, 0x01, 0xfd,
-+	0xcb, 0xe6, 0x4d, 0x9b, 0xf0, 0x88, 0x94, 0x57,
-+	0x66, 0xef, 0x72, 0x4c, 0x42, 0x6e, 0x16, 0x19,
-+	0x15, 0xea, 0x70, 0x5b, 0xac, 0x13, 0xdb, 0x9f,
-+	0x18, 0xe2, 0x3c, 0x26, 0x97, 0xbc, 0xdc, 0x45,
-+	0x8c, 0x6c, 0x24, 0x69, 0x9c, 0xf7, 0x65, 0x1e,
-+	0x18, 0x59, 0x31, 0x7c, 0xe4, 0x73, 0xbc, 0x39,
-+	0x62, 0xc6, 0x5c, 0x9f, 0xbf, 0xfa, 0x90, 0x03,
-+	0xc9, 0x72, 0x26, 0xb6, 0x1b, 0xc2, 0xb7, 0x3f,
-+	0xf2, 0x13, 0x77, 0xf2, 0x8d, 0xb9, 0x47, 0xd0,
-+	0x53, 0xdd, 0xc8, 0x91, 0x83, 0x8b, 0xb1, 0xce,
-+	0xa3, 0xfe, 0xcd, 0xd9, 0xdd, 0x92, 0x7b, 0xdb,
-+	0xb8, 0xfb, 0xc9, 0x2d, 0x01, 0x59, 0x39, 0x52,
-+	0xad, 0x1b, 0xec, 0xcf, 0xd7, 0x70, 0x13, 0x21,
-+	0xf5, 0x47, 0xaa, 0x18, 0x21, 0x5c, 0xc9, 0x9a,
-+	0xd2, 0x6b, 0x05, 0x9c, 0x01, 0xa1, 0xda, 0x35,
-+	0x5d, 0xb3, 0x70, 0xe6, 0xa9, 0x80, 0x8b, 0x91,
-+	0xb7, 0xb3, 0x5f, 0x24, 0x9a, 0xb7, 0xd1, 0x6b,
-+	0xa1, 0x1c, 0x50, 0xba, 0x49, 0xe0, 0xee, 0x2e,
-+	0x75, 0xac, 0x69, 0xc0, 0xeb, 0x03, 0xdd, 0x19,
-+	0xe5, 0xf6, 0x06, 0xdd, 0xc3, 0xd7, 0x2b, 0x07,
-+	0x07, 0x30, 0xa7, 0x19, 0x0c, 0xbf, 0xe6, 0x18,
-+	0xcc, 0xb1, 0x01, 0x11, 0x85, 0x77, 0x1d, 0x96,
-+	0xa7, 0xa3, 0x00, 0x84, 0x02, 0xa2, 0x83, 0x68,
-+	0xda, 0x17, 0x27, 0xc8, 0x7f, 0x23, 0xb7, 0xf4,
-+	0x13, 0x85, 0xcf, 0xdd, 0x7a, 0x7d, 0x24, 0x57,
-+	0xfe, 0x05, 0x93, 0xf5, 0x74, 0xce, 0xed, 0x0c,
-+	0x20, 0x98, 0x8d, 0x92, 0x30, 0xa1, 0x29, 0x23,
-+	0x1a, 0xa0, 0x4f, 0x69, 0x56, 0x4c, 0xe1, 0xc8,
-+	0xce, 0xf6, 0x9a, 0x0c, 0xa4, 0xfa, 0x04, 0xf6,
-+	0x62, 0x95, 0xf2, 0xfa, 0xc7, 0x40, 0x68, 0x40,
-+	0x8f, 0x41, 0xda, 0xb4, 0x26, 0x6f, 0x70, 0xab,
-+	0x40, 0x61, 0xa4, 0x0e, 0x75, 0xfb, 0x86, 0xeb,
-+	0x9d, 0x9a, 0x1f, 0xec, 0x76, 0x99, 0xe7, 0xea,
-+	0xaa, 0x1e, 0x2d, 0xb5, 0xd4, 0xa6, 0x1a, 0xb8,
-+	0x61, 0x0a, 0x1d, 0x16, 0x5b, 0x98, 0xc2, 0x31,
-+	0x40, 0xe7, 0x23, 0x1d, 0x66, 0x99, 0xc8, 0xc0,
-+	0xd7, 0xce, 0xf3, 0x57, 0x40, 0x04, 0x3f, 0xfc,
-+	0xea, 0xb3, 0xfc, 0xd2, 0xd3, 0x99, 0xa4, 0x94,
-+	0x69, 0xa0, 0xef, 0xd1, 0x85, 0xb3, 0xa6, 0xb1,
-+	0x28, 0xbf, 0x94, 0x67, 0x22, 0xc3, 0x36, 0x46,
-+	0xf8, 0xd2, 0x0f, 0x5f, 0xf4, 0x59, 0x80, 0xe6,
-+	0x2d, 0x43, 0x08, 0x7d, 0x19, 0x09, 0x97, 0xa7,
-+	0x4c, 0x3d, 0x8d, 0xba, 0x65, 0x62, 0xa3, 0x71,
-+	0x33, 0x29, 0x62, 0xdb, 0xc1, 0x33, 0x34, 0x1a,
-+	0x63, 0x33, 0x16, 0xb6, 0x64, 0x7e, 0xab, 0x33,
-+	0xf0, 0xe6, 0x26, 0x68, 0xba, 0x1d, 0x2e, 0x38,
-+	0x08, 0xe6, 0x02, 0xd3, 0x25, 0x2c, 0x47, 0x23,
-+	0x58, 0x34, 0x0f, 0x9d, 0x63, 0x4f, 0x63, 0xbb,
-+	0x7f, 0x3b, 0x34, 0x38, 0xa7, 0xb5, 0x8d, 0x65,
-+	0xd9, 0x9f, 0x79, 0x55, 0x3e, 0x4d, 0xe7, 0x73,
-+	0xd8, 0xf6, 0x98, 0x97, 0x84, 0x60, 0x9c, 0xc8,
-+	0xa9, 0x3c, 0xf6, 0xdc, 0x12, 0x5c, 0xe1, 0xbb,
-+	0x0b, 0x8b, 0x98, 0x9c, 0x9d, 0x26, 0x7c, 0x4a,
-+	0xe6, 0x46, 0x36, 0x58, 0x21, 0x4a, 0xee, 0xca,
-+	0xd7, 0x3b, 0xc2, 0x6c, 0x49, 0x2f, 0xe5, 0xd5,
-+	0x03, 0x59, 0x84, 0x53, 0xcb, 0xfe, 0x92, 0x71,
-+	0x2e, 0x7c, 0x21, 0xcc, 0x99, 0x85, 0x7f, 0xb8,
-+	0x74, 0x90, 0x13, 0x42, 0x3f, 0xe0, 0x6b, 0x1d,
-+	0xf2, 0x4d, 0x54, 0xd4, 0xfc, 0x3a, 0x05, 0xe6,
-+	0x74, 0xaf, 0xa6, 0xa0, 0x2a, 0x20, 0x23, 0x5d,
-+	0x34, 0x5c, 0xd9, 0x3e, 0x4e, 0xfa, 0x93, 0xe7,
-+	0xaa, 0xe9, 0x6f, 0x08, 0x43, 0x67, 0x41, 0xc5,
-+	0xad, 0xfb, 0x31, 0x95, 0x82, 0x73, 0x32, 0xd8,
-+	0xa6, 0xa3, 0xed, 0x0e, 0x2d, 0xf6, 0x5f, 0xfd,
-+	0x80, 0xa6, 0x7a, 0xe0, 0xdf, 0x78, 0x15, 0x29,
-+	0x74, 0x33, 0xd0, 0x9e, 0x83, 0x86, 0x72, 0x22,
-+	0x57, 0x29, 0xb9, 0x9e, 0x5d, 0xd3, 0x1a, 0xb5,
-+	0x96, 0x72, 0x41, 0x3d, 0xf1, 0x64, 0x43, 0x67,
-+	0xee, 0xaa, 0x5c, 0xd3, 0x9a, 0x96, 0x13, 0x11,
-+	0x5d, 0xf3, 0x0c, 0x87, 0x82, 0x1e, 0x41, 0x9e,
-+	0xd0, 0x27, 0xd7, 0x54, 0x3b, 0x67, 0x73, 0x09,
-+	0x91, 0xe9, 0xd5, 0x36, 0xa7, 0xb5, 0x55, 0xe4,
-+	0xf3, 0x21, 0x51, 0x49, 0x22, 0x07, 0x55, 0x4f,
-+	0x44, 0x4b, 0xd2, 0x15, 0x93, 0x17, 0x2a, 0xfa,
-+	0x4d, 0x4a, 0x57, 0xdb, 0x4c, 0xa6, 0xeb, 0xec,
-+	0x53, 0x25, 0x6c, 0x21, 0xed, 0x00, 0x4c, 0x3b,
-+	0xca, 0x14, 0x57, 0xa9, 0xd6, 0x6a, 0xcd, 0x8d,
-+	0x5e, 0x74, 0xac, 0x72, 0xc1, 0x97, 0xe5, 0x1b,
-+	0x45, 0x4e, 0xda, 0xfc, 0xcc, 0x40, 0xe8, 0x48,
-+	0x88, 0x0b, 0xa3, 0xe3, 0x8d, 0x83, 0x42, 0xc3,
-+	0x23, 0xfd, 0x68, 0xb5, 0x8e, 0xf1, 0x9d, 0x63,
-+	0x77, 0xe9, 0xa3, 0x8e, 0x8c, 0x26, 0x6b, 0xbd,
-+	0x72, 0x73, 0x35, 0x0c, 0x03, 0xf8, 0x43, 0x78,
-+	0x52, 0x71, 0x15, 0x1f, 0x71, 0x5d, 0x6e, 0xed,
-+	0xb9, 0xcc, 0x86, 0x30, 0xdb, 0x2b, 0xd3, 0x82,
-+	0x88, 0x23, 0x71, 0x90, 0x53, 0x5c, 0xa9, 0x2f,
-+	0x76, 0x01, 0xb7, 0x9a, 0xfe, 0x43, 0x55, 0xa3,
-+	0x04, 0x9b, 0x0e, 0xe4, 0x59, 0xdf, 0xc9, 0xe9,
-+	0xb1, 0xea, 0x29, 0x28, 0x3c, 0x5c, 0xae, 0x72,
-+	0x84, 0xb6, 0xc6, 0xeb, 0x0c, 0x27, 0x07, 0x74,
-+	0x90, 0x0d, 0x31, 0xb0, 0x00, 0x77, 0xe9, 0x40,
-+	0x70, 0x6f, 0x68, 0xa7, 0xfd, 0x06, 0xec, 0x4b,
-+	0xc0, 0xb7, 0xac, 0xbc, 0x33, 0xb7, 0x6d, 0x0a,
-+	0xbd, 0x12, 0x1b, 0x59, 0xcb, 0xdd, 0x32, 0xf5,
-+	0x1d, 0x94, 0x57, 0x76, 0x9e, 0x0c, 0x18, 0x98,
-+	0x71, 0xd7, 0x2a, 0xdb, 0x0b, 0x7b, 0xa7, 0x71,
-+	0xb7, 0x67, 0x81, 0x23, 0x96, 0xae, 0xb9, 0x7e,
-+	0x32, 0x43, 0x92, 0x8a, 0x19, 0xa0, 0xc4, 0xd4,
-+	0x3b, 0x57, 0xf9, 0x4a, 0x2c, 0xfb, 0x51, 0x46,
-+	0xbb, 0xcb, 0x5d, 0xb3, 0xef, 0x13, 0x93, 0x6e,
-+	0x68, 0x42, 0x54, 0x57, 0xd3, 0x6a, 0x3a, 0x8f,
-+	0x9d, 0x66, 0xbf, 0xbd, 0x36, 0x23, 0xf5, 0x93,
-+	0x83, 0x7b, 0x9c, 0xc0, 0xdd, 0xc5, 0x49, 0xc0,
-+	0x64, 0xed, 0x07, 0x12, 0xb3, 0xe6, 0xe4, 0xe5,
-+	0x38, 0x95, 0x23, 0xb1, 0xa0, 0x3b, 0x1a, 0x61,
-+	0xda, 0x17, 0xac, 0xc3, 0x58, 0xdd, 0x74, 0x64,
-+	0x22, 0x11, 0xe8, 0x32, 0x1d, 0x16, 0x93, 0x85,
-+	0x99, 0xa5, 0x9c, 0x34, 0x55, 0xb1, 0xe9, 0x20,
-+	0x72, 0xc9, 0x28, 0x7b, 0x79, 0x00, 0xa1, 0xa6,
-+	0xa3, 0x27, 0x40, 0x18, 0x8a, 0x54, 0xe0, 0xcc,
-+	0xe8, 0x4e, 0x8e, 0x43, 0x96, 0xe7, 0x3f, 0xc8,
-+	0xe9, 0xb2, 0xf9, 0xc9, 0xda, 0x04, 0x71, 0x50,
-+	0x47, 0xe4, 0xaa, 0xce, 0xa2, 0x30, 0xc8, 0xe4,
-+	0xac, 0xc7, 0x0d, 0x06, 0x2e, 0xe6, 0xe8, 0x80,
-+	0x36, 0x29, 0x9e, 0x01, 0xb8, 0xc3, 0xf0, 0xa0,
-+	0x5d, 0x7a, 0xca, 0x4d, 0xa0, 0x57, 0xbd, 0x2a,
-+	0x45, 0xa7, 0x7f, 0x9c, 0x93, 0x07, 0x8f, 0x35,
-+	0x67, 0x92, 0xe3, 0xe9, 0x7f, 0xa8, 0x61, 0x43,
-+	0x9e, 0x25, 0x4f, 0x33, 0x76, 0x13, 0x6e, 0x12,
-+	0xb9, 0xdd, 0xa4, 0x7c, 0x08, 0x9f, 0x7c, 0xe7,
-+	0x0a, 0x8d, 0x84, 0x06, 0xa4, 0x33, 0x17, 0x34,
-+	0x5e, 0x10, 0x7c, 0xc0, 0xa8, 0x3d, 0x1f, 0x42,
-+	0x20, 0x51, 0x65, 0x5d, 0x09, 0xc3, 0xaa, 0xc0,
-+	0xc8, 0x0d, 0xf0, 0x79, 0xbc, 0x20, 0x1b, 0x95,
-+	0xe7, 0x06, 0x7d, 0x47, 0x20, 0x03, 0x1a, 0x74,
-+	0xdd, 0xe2, 0xd4, 0xae, 0x38, 0x71, 0x9b, 0xf5,
-+	0x80, 0xec, 0x08, 0x4e, 0x56, 0xba, 0x76, 0x12,
-+	0x1a, 0xdf, 0x48, 0xf3, 0xae, 0xb3, 0xe6, 0xe6,
-+	0xbe, 0xc0, 0x91, 0x2e, 0x01, 0xb3, 0x01, 0x86,
-+	0xa2, 0xb9, 0x52, 0xd1, 0x21, 0xae, 0xd4, 0x97,
-+	0x1d, 0xef, 0x41, 0x12, 0x95, 0x3d, 0x48, 0x45,
-+	0x1c, 0x56, 0x32, 0x8f, 0xb8, 0x43, 0xbb, 0x19,
-+	0xf3, 0xca, 0xe9, 0xeb, 0x6d, 0x84, 0xbe, 0x86,
-+	0x06, 0xe2, 0x36, 0xb2, 0x62, 0x9d, 0xd3, 0x4c,
-+	0x48, 0x18, 0x54, 0x13, 0x4e, 0xcf, 0xfd, 0xba,
-+	0x84, 0xb9, 0x30, 0x53, 0xcf, 0xfb, 0xb9, 0x29,
-+	0x8f, 0xdc, 0x9f, 0xef, 0x60, 0x0b, 0x64, 0xf6,
-+	0x8b, 0xee, 0xa6, 0x91, 0xc2, 0x41, 0x6c, 0xf6,
-+	0xfa, 0x79, 0x67, 0x4b, 0xc1, 0x3f, 0xaf, 0x09,
-+	0x81, 0xd4, 0x5d, 0xcb, 0x09, 0xdf, 0x36, 0x31,
-+	0xc0, 0x14, 0x3c, 0x7c, 0x0e, 0x65, 0x95, 0x99,
-+	0x6d, 0xa3, 0xf4, 0xd7, 0x38, 0xee, 0x1a, 0x2b,
-+	0x37, 0xe2, 0xa4, 0x3b, 0x4b, 0xd0, 0x65, 0xca,
-+	0xf8, 0xc3, 0xe8, 0x15, 0x20, 0xef, 0xf2, 0x00,
-+	0xfd, 0x01, 0x09, 0xc5, 0xc8, 0x17, 0x04, 0x93,
-+	0xd0, 0x93, 0x03, 0x55, 0xc5, 0xfe, 0x32, 0xa3,
-+	0x3e, 0x28, 0x2d, 0x3b, 0x93, 0x8a, 0xcc, 0x07,
-+	0x72, 0x80, 0x8b, 0x74, 0x16, 0x24, 0xbb, 0xda,
-+	0x94, 0x39, 0x30, 0x8f, 0xb1, 0xcd, 0x4a, 0x90,
-+	0x92, 0x7c, 0x14, 0x8f, 0x95, 0x4e, 0xac, 0x9b,
-+	0xd8, 0x8f, 0x1a, 0x87, 0xa4, 0x32, 0x27, 0x8a,
-+	0xba, 0xf7, 0x41, 0xcf, 0x84, 0x37, 0x19, 0xe6,
-+	0x06, 0xf5, 0x0e, 0xcf, 0x36, 0xf5, 0x9e, 0x6c,
-+	0xde, 0xbc, 0xff, 0x64, 0x7e, 0x4e, 0x59, 0x57,
-+	0x48, 0xfe, 0x14, 0xf7, 0x9c, 0x93, 0x5d, 0x15,
-+	0xad, 0xcc, 0x11, 0xb1, 0x17, 0x18, 0xb2, 0x7e,
-+	0xcc, 0xab, 0xe9, 0xce, 0x7d, 0x77, 0x5b, 0x51,
-+	0x1b, 0x1e, 0x20, 0xa8, 0x32, 0x06, 0x0e, 0x75,
-+	0x93, 0xac, 0xdb, 0x35, 0x37, 0x1f, 0xe9, 0x19,
-+	0x1d, 0xb4, 0x71, 0x97, 0xd6, 0x4e, 0x2c, 0x08,
-+	0xa5, 0x13, 0xf9, 0x0e, 0x7e, 0x78, 0x6e, 0x14,
-+	0xe0, 0xa9, 0xb9, 0x96, 0x4c, 0x80, 0x82, 0xba,
-+	0x17, 0xb3, 0x9d, 0x69, 0xb0, 0x84, 0x46, 0xff,
-+	0xf9, 0x52, 0x79, 0x94, 0x58, 0x3a, 0x62, 0x90,
-+	0x15, 0x35, 0x71, 0x10, 0x37, 0xed, 0xa1, 0x8e,
-+	0x53, 0x6e, 0xf4, 0x26, 0x57, 0x93, 0x15, 0x93,
-+	0xf6, 0x81, 0x2c, 0x5a, 0x10, 0xda, 0x92, 0xad,
-+	0x2f, 0xdb, 0x28, 0x31, 0x2d, 0x55, 0x04, 0xd2,
-+	0x06, 0x28, 0x8c, 0x1e, 0xdc, 0xea, 0x54, 0xac,
-+	0xff, 0xb7, 0x6c, 0x30, 0x15, 0xd4, 0xb4, 0x0d,
-+	0x00, 0x93, 0x57, 0xdd, 0xd2, 0x07, 0x07, 0x06,
-+	0xd9, 0x43, 0x9b, 0xcd, 0x3a, 0xf4, 0x7d, 0x4c,
-+	0x36, 0x5d, 0x23, 0xa2, 0xcc, 0x57, 0x40, 0x91,
-+	0xe9, 0x2c, 0x2f, 0x2c, 0xd5, 0x30, 0x9b, 0x17,
-+	0xb0, 0xc9, 0xf7, 0xa7, 0x2f, 0xd1, 0x93, 0x20,
-+	0x6b, 0xc6, 0xc1, 0xe4, 0x6f, 0xcb, 0xd1, 0xe7,
-+	0x09, 0x0f, 0x9e, 0xdc, 0xaa, 0x9f, 0x2f, 0xdf,
-+	0x56, 0x9f, 0xd4, 0x33, 0x04, 0xaf, 0xd3, 0x6c,
-+	0x58, 0x61, 0xf0, 0x30, 0xec, 0xf2, 0x7f, 0xf2,
-+	0x9c, 0xdf, 0x39, 0xbb, 0x6f, 0xa2, 0x8c, 0x7e,
-+	0xc4, 0x22, 0x51, 0x71, 0xc0, 0x4d, 0x14, 0x1a,
-+	0xc4, 0xcd, 0x04, 0xd9, 0x87, 0x08, 0x50, 0x05,
-+	0xcc, 0xaf, 0xf6, 0xf0, 0x8f, 0x92, 0x54, 0x58,
-+	0xc2, 0xc7, 0x09, 0x7a, 0x59, 0x02, 0x05, 0xe8,
-+	0xb0, 0x86, 0xd9, 0xbf, 0x7b, 0x35, 0x51, 0x4d,
-+	0xaf, 0x08, 0x97, 0x2c, 0x65, 0xda, 0x2a, 0x71,
-+	0x3a, 0xa8, 0x51, 0xcc, 0xf2, 0x73, 0x27, 0xc3,
-+	0xfd, 0x62, 0xcf, 0xe3, 0xb2, 0xca, 0xcb, 0xbe,
-+	0x1a, 0x0a, 0xa1, 0x34, 0x7b, 0x77, 0xc4, 0x62,
-+	0x68, 0x78, 0x5f, 0x94, 0x07, 0x04, 0x65, 0x16,
-+	0x4b, 0x61, 0xcb, 0xff, 0x75, 0x26, 0x50, 0x66,
-+	0x1f, 0x6e, 0x93, 0xf8, 0xc5, 0x51, 0xeb, 0xa4,
-+	0x4a, 0x48, 0x68, 0x6b, 0xe2, 0x5e, 0x44, 0xb2,
-+	0x50, 0x2c, 0x6c, 0xae, 0x79, 0x4e, 0x66, 0x35,
-+	0x81, 0x50, 0xac, 0xbc, 0x3f, 0xb1, 0x0c, 0xf3,
-+	0x05, 0x3c, 0x4a, 0xa3, 0x6c, 0x2a, 0x79, 0xb4,
-+	0xb7, 0xab, 0xca, 0xc7, 0x9b, 0x8e, 0xcd, 0x5f,
-+	0x11, 0x03, 0xcb, 0x30, 0xa3, 0xab, 0xda, 0xfe,
-+	0x64, 0xb9, 0xbb, 0xd8, 0x5e, 0x3a, 0x1a, 0x56,
-+	0xe5, 0x05, 0x48, 0x90, 0x1e, 0x61, 0x69, 0x1b,
-+	0x22, 0xe6, 0x1a, 0x3c, 0x75, 0xad, 0x1f, 0x37,
-+	0x28, 0xdc, 0xe4, 0x6d, 0xbd, 0x42, 0xdc, 0xd3,
-+	0xc8, 0xb6, 0x1c, 0x48, 0xfe, 0x94, 0x77, 0x7f,
-+	0xbd, 0x62, 0xac, 0xa3, 0x47, 0x27, 0xcf, 0x5f,
-+	0xd9, 0xdb, 0xaf, 0xec, 0xf7, 0x5e, 0xc1, 0xb0,
-+	0x9d, 0x01, 0x26, 0x99, 0x7e, 0x8f, 0x03, 0x70,
-+	0xb5, 0x42, 0xbe, 0x67, 0x28, 0x1b, 0x7c, 0xbd,
-+	0x61, 0x21, 0x97, 0xcc, 0x5c, 0xe1, 0x97, 0x8f,
-+	0x8d, 0xde, 0x2b, 0xaa, 0xa7, 0x71, 0x1d, 0x1e,
-+	0x02, 0x73, 0x70, 0x58, 0x32, 0x5b, 0x1d, 0x67,
-+	0x3d, 0xe0, 0x74, 0x4f, 0x03, 0xf2, 0x70, 0x51,
-+	0x79, 0xf1, 0x61, 0x70, 0x15, 0x74, 0x9d, 0x23,
-+	0x89, 0xde, 0xac, 0xfd, 0xde, 0xd0, 0x1f, 0xc3,
-+	0x87, 0x44, 0x35, 0x4b, 0xe5, 0xb0, 0x60, 0xc5,
-+	0x22, 0xe4, 0x9e, 0xca, 0xeb, 0xd5, 0x3a, 0x09,
-+	0x45, 0xa4, 0xdb, 0xfa, 0x3f, 0xeb, 0x1b, 0xc7,
-+	0xc8, 0x14, 0x99, 0x51, 0x92, 0x10, 0xed, 0xed,
-+	0x28, 0xe0, 0xa1, 0xf8, 0x26, 0xcf, 0xcd, 0xcb,
-+	0x63, 0xa1, 0x3b, 0xe3, 0xdf, 0x7e, 0xfe, 0xa6,
-+	0xf0, 0x81, 0x9a, 0xbf, 0x55, 0xde, 0x54, 0xd5,
-+	0x56, 0x60, 0x98, 0x10, 0x68, 0xf4, 0x38, 0x96,
-+	0x8e, 0x6f, 0x1d, 0x44, 0x7f, 0xd6, 0x2f, 0xfe,
-+	0x55, 0xfb, 0x0c, 0x7e, 0x67, 0xe2, 0x61, 0x44,
-+	0xed, 0xf2, 0x35, 0x30, 0x5d, 0xe9, 0xc7, 0xd6,
-+	0x6d, 0xe0, 0xa0, 0xed, 0xf3, 0xfc, 0xd8, 0x3e,
-+	0x0a, 0x7b, 0xcd, 0xaf, 0x65, 0x68, 0x18, 0xc0,
-+	0xec, 0x04, 0x1c, 0x74, 0x6d, 0xe2, 0x6e, 0x79,
-+	0xd4, 0x11, 0x2b, 0x62, 0xd5, 0x27, 0xad, 0x4f,
-+	0x01, 0x59, 0x73, 0xcc, 0x6a, 0x53, 0xfb, 0x2d,
-+	0xd5, 0x4e, 0x99, 0x21, 0x65, 0x4d, 0xf5, 0x82,
-+	0xf7, 0xd8, 0x42, 0xce, 0x6f, 0x3d, 0x36, 0x47,
-+	0xf1, 0x05, 0x16, 0xe8, 0x1b, 0x6a, 0x8f, 0x93,
-+	0xf2, 0x8f, 0x37, 0x40, 0x12, 0x28, 0xa3, 0xe6,
-+	0xb9, 0x17, 0x4a, 0x1f, 0xb1, 0xd1, 0x66, 0x69,
-+	0x86, 0xc4, 0xfc, 0x97, 0xae, 0x3f, 0x8f, 0x1e,
-+	0x2b, 0xdf, 0xcd, 0xf9, 0x3c
-+};
-+static const u8 enc_assoc011[] __initconst = {
-+	0xd6, 0x31, 0xda, 0x5d, 0x42, 0x5e, 0xd7
-+};
-+static const u8 enc_nonce011[] __initconst = {
-+	0xfd, 0x87, 0xd4, 0xd8, 0x62, 0xfd, 0xec, 0xaa
-+};
-+static const u8 enc_key011[] __initconst = {
-+	0x35, 0x4e, 0xb5, 0x70, 0x50, 0x42, 0x8a, 0x85,
-+	0xf2, 0xfb, 0xed, 0x7b, 0xd0, 0x9e, 0x97, 0xca,
-+	0xfa, 0x98, 0x66, 0x63, 0xee, 0x37, 0xcc, 0x52,
-+	0xfe, 0xd1, 0xdf, 0x95, 0x15, 0x34, 0x29, 0x38
-+};
-+
-+static const u8 enc_input012[] __initconst = {
-+	0x74, 0xa6, 0x3e, 0xe4, 0xb1, 0xcb, 0xaf, 0xb0,
-+	0x40, 0xe5, 0x0f, 0x9e, 0xf1, 0xf2, 0x89, 0xb5,
-+	0x42, 0x34, 0x8a, 0xa1, 0x03, 0xb7, 0xe9, 0x57,
-+	0x46, 0xbe, 0x20, 0xe4, 0x6e, 0xb0, 0xeb, 0xff,
-+	0xea, 0x07, 0x7e, 0xef, 0xe2, 0x55, 0x9f, 0xe5,
-+	0x78, 0x3a, 0xb7, 0x83, 0xc2, 0x18, 0x40, 0x7b,
-+	0xeb, 0xcd, 0x81, 0xfb, 0x90, 0x12, 0x9e, 0x46,
-+	0xa9, 0xd6, 0x4a, 0xba, 0xb0, 0x62, 0xdb, 0x6b,
-+	0x99, 0xc4, 0xdb, 0x54, 0x4b, 0xb8, 0xa5, 0x71,
-+	0xcb, 0xcd, 0x63, 0x32, 0x55, 0xfb, 0x31, 0xf0,
-+	0x38, 0xf5, 0xbe, 0x78, 0xe4, 0x45, 0xce, 0x1b,
-+	0x6a, 0x5b, 0x0e, 0xf4, 0x16, 0xe4, 0xb1, 0x3d,
-+	0xf6, 0x63, 0x7b, 0xa7, 0x0c, 0xde, 0x6f, 0x8f,
-+	0x74, 0xdf, 0xe0, 0x1e, 0x9d, 0xce, 0x8f, 0x24,
-+	0xef, 0x23, 0x35, 0x33, 0x7b, 0x83, 0x34, 0x23,
-+	0x58, 0x74, 0x14, 0x77, 0x1f, 0xc2, 0x4f, 0x4e,
-+	0xc6, 0x89, 0xf9, 0x52, 0x09, 0x37, 0x64, 0x14,
-+	0xc4, 0x01, 0x6b, 0x9d, 0x77, 0xe8, 0x90, 0x5d,
-+	0xa8, 0x4a, 0x2a, 0xef, 0x5c, 0x7f, 0xeb, 0xbb,
-+	0xb2, 0xc6, 0x93, 0x99, 0x66, 0xdc, 0x7f, 0xd4,
-+	0x9e, 0x2a, 0xca, 0x8d, 0xdb, 0xe7, 0x20, 0xcf,
-+	0xe4, 0x73, 0xae, 0x49, 0x7d, 0x64, 0x0f, 0x0e,
-+	0x28, 0x46, 0xa9, 0xa8, 0x32, 0xe4, 0x0e, 0xf6,
-+	0x51, 0x53, 0xb8, 0x3c, 0xb1, 0xff, 0xa3, 0x33,
-+	0x41, 0x75, 0xff, 0xf1, 0x6f, 0xf1, 0xfb, 0xbb,
-+	0x83, 0x7f, 0x06, 0x9b, 0xe7, 0x1b, 0x0a, 0xe0,
-+	0x5c, 0x33, 0x60, 0x5b, 0xdb, 0x5b, 0xed, 0xfe,
-+	0xa5, 0x16, 0x19, 0x72, 0xa3, 0x64, 0x23, 0x00,
-+	0x02, 0xc7, 0xf3, 0x6a, 0x81, 0x3e, 0x44, 0x1d,
-+	0x79, 0x15, 0x5f, 0x9a, 0xde, 0xe2, 0xfd, 0x1b,
-+	0x73, 0xc1, 0xbc, 0x23, 0xba, 0x31, 0xd2, 0x50,
-+	0xd5, 0xad, 0x7f, 0x74, 0xa7, 0xc9, 0xf8, 0x3e,
-+	0x2b, 0x26, 0x10, 0xf6, 0x03, 0x36, 0x74, 0xe4,
-+	0x0e, 0x6a, 0x72, 0xb7, 0x73, 0x0a, 0x42, 0x28,
-+	0xc2, 0xad, 0x5e, 0x03, 0xbe, 0xb8, 0x0b, 0xa8,
-+	0x5b, 0xd4, 0xb8, 0xba, 0x52, 0x89, 0xb1, 0x9b,
-+	0xc1, 0xc3, 0x65, 0x87, 0xed, 0xa5, 0xf4, 0x86,
-+	0xfd, 0x41, 0x80, 0x91, 0x27, 0x59, 0x53, 0x67,
-+	0x15, 0x78, 0x54, 0x8b, 0x2d, 0x3d, 0xc7, 0xff,
-+	0x02, 0x92, 0x07, 0x5f, 0x7a, 0x4b, 0x60, 0x59,
-+	0x3c, 0x6f, 0x5c, 0xd8, 0xec, 0x95, 0xd2, 0xfe,
-+	0xa0, 0x3b, 0xd8, 0x3f, 0xd1, 0x69, 0xa6, 0xd6,
-+	0x41, 0xb2, 0xf4, 0x4d, 0x12, 0xf4, 0x58, 0x3e,
-+	0x66, 0x64, 0x80, 0x31, 0x9b, 0xa8, 0x4c, 0x8b,
-+	0x07, 0xb2, 0xec, 0x66, 0x94, 0x66, 0x47, 0x50,
-+	0x50, 0x5f, 0x18, 0x0b, 0x0e, 0xd6, 0xc0, 0x39,
-+	0x21, 0x13, 0x9e, 0x33, 0xbc, 0x79, 0x36, 0x02,
-+	0x96, 0x70, 0xf0, 0x48, 0x67, 0x2f, 0x26, 0xe9,
-+	0x6d, 0x10, 0xbb, 0xd6, 0x3f, 0xd1, 0x64, 0x7a,
-+	0x2e, 0xbe, 0x0c, 0x61, 0xf0, 0x75, 0x42, 0x38,
-+	0x23, 0xb1, 0x9e, 0x9f, 0x7c, 0x67, 0x66, 0xd9,
-+	0x58, 0x9a, 0xf1, 0xbb, 0x41, 0x2a, 0x8d, 0x65,
-+	0x84, 0x94, 0xfc, 0xdc, 0x6a, 0x50, 0x64, 0xdb,
-+	0x56, 0x33, 0x76, 0x00, 0x10, 0xed, 0xbe, 0xd2,
-+	0x12, 0xf6, 0xf6, 0x1b, 0xa2, 0x16, 0xde, 0xae,
-+	0x31, 0x95, 0xdd, 0xb1, 0x08, 0x7e, 0x4e, 0xee,
-+	0xe7, 0xf9, 0xa5, 0xfb, 0x5b, 0x61, 0x43, 0x00,
-+	0x40, 0xf6, 0x7e, 0x02, 0x04, 0x32, 0x4e, 0x0c,
-+	0xe2, 0x66, 0x0d, 0xd7, 0x07, 0x98, 0x0e, 0xf8,
-+	0x72, 0x34, 0x6d, 0x95, 0x86, 0xd7, 0xcb, 0x31,
-+	0x54, 0x47, 0xd0, 0x38, 0x29, 0x9c, 0x5a, 0x68,
-+	0xd4, 0x87, 0x76, 0xc9, 0xe7, 0x7e, 0xe3, 0xf4,
-+	0x81, 0x6d, 0x18, 0xcb, 0xc9, 0x05, 0xaf, 0xa0,
-+	0xfb, 0x66, 0xf7, 0xf1, 0x1c, 0xc6, 0x14, 0x11,
-+	0x4f, 0x2b, 0x79, 0x42, 0x8b, 0xbc, 0xac, 0xe7,
-+	0x6c, 0xfe, 0x0f, 0x58, 0xe7, 0x7c, 0x78, 0x39,
-+	0x30, 0xb0, 0x66, 0x2c, 0x9b, 0x6d, 0x3a, 0xe1,
-+	0xcf, 0xc9, 0xa4, 0x0e, 0x6d, 0x6d, 0x8a, 0xa1,
-+	0x3a, 0xe7, 0x28, 0xd4, 0x78, 0x4c, 0xa6, 0xa2,
-+	0x2a, 0xa6, 0x03, 0x30, 0xd7, 0xa8, 0x25, 0x66,
-+	0x87, 0x2f, 0x69, 0x5c, 0x4e, 0xdd, 0xa5, 0x49,
-+	0x5d, 0x37, 0x4a, 0x59, 0xc4, 0xaf, 0x1f, 0xa2,
-+	0xe4, 0xf8, 0xa6, 0x12, 0x97, 0xd5, 0x79, 0xf5,
-+	0xe2, 0x4a, 0x2b, 0x5f, 0x61, 0xe4, 0x9e, 0xe3,
-+	0xee, 0xb8, 0xa7, 0x5b, 0x2f, 0xf4, 0x9e, 0x6c,
-+	0xfb, 0xd1, 0xc6, 0x56, 0x77, 0xba, 0x75, 0xaa,
-+	0x3d, 0x1a, 0xa8, 0x0b, 0xb3, 0x68, 0x24, 0x00,
-+	0x10, 0x7f, 0xfd, 0xd7, 0xa1, 0x8d, 0x83, 0x54,
-+	0x4f, 0x1f, 0xd8, 0x2a, 0xbe, 0x8a, 0x0c, 0x87,
-+	0xab, 0xa2, 0xde, 0xc3, 0x39, 0xbf, 0x09, 0x03,
-+	0xa5, 0xf3, 0x05, 0x28, 0xe1, 0xe1, 0xee, 0x39,
-+	0x70, 0x9c, 0xd8, 0x81, 0x12, 0x1e, 0x02, 0x40,
-+	0xd2, 0x6e, 0xf0, 0xeb, 0x1b, 0x3d, 0x22, 0xc6,
-+	0xe5, 0xe3, 0xb4, 0x5a, 0x98, 0xbb, 0xf0, 0x22,
-+	0x28, 0x8d, 0xe5, 0xd3, 0x16, 0x48, 0x24, 0xa5,
-+	0xe6, 0x66, 0x0c, 0xf9, 0x08, 0xf9, 0x7e, 0x1e,
-+	0xe1, 0x28, 0x26, 0x22, 0xc7, 0xc7, 0x0a, 0x32,
-+	0x47, 0xfa, 0xa3, 0xbe, 0x3c, 0xc4, 0xc5, 0x53,
-+	0x0a, 0xd5, 0x94, 0x4a, 0xd7, 0x93, 0xd8, 0x42,
-+	0x99, 0xb9, 0x0a, 0xdb, 0x56, 0xf7, 0xb9, 0x1c,
-+	0x53, 0x4f, 0xfa, 0xd3, 0x74, 0xad, 0xd9, 0x68,
-+	0xf1, 0x1b, 0xdf, 0x61, 0xc6, 0x5e, 0xa8, 0x48,
-+	0xfc, 0xd4, 0x4a, 0x4c, 0x3c, 0x32, 0xf7, 0x1c,
-+	0x96, 0x21, 0x9b, 0xf9, 0xa3, 0xcc, 0x5a, 0xce,
-+	0xd5, 0xd7, 0x08, 0x24, 0xf6, 0x1c, 0xfd, 0xdd,
-+	0x38, 0xc2, 0x32, 0xe9, 0xb8, 0xe7, 0xb6, 0xfa,
-+	0x9d, 0x45, 0x13, 0x2c, 0x83, 0xfd, 0x4a, 0x69,
-+	0x82, 0xcd, 0xdc, 0xb3, 0x76, 0x0c, 0x9e, 0xd8,
-+	0xf4, 0x1b, 0x45, 0x15, 0xb4, 0x97, 0xe7, 0x58,
-+	0x34, 0xe2, 0x03, 0x29, 0x5a, 0xbf, 0xb6, 0xe0,
-+	0x5d, 0x13, 0xd9, 0x2b, 0xb4, 0x80, 0xb2, 0x45,
-+	0x81, 0x6a, 0x2e, 0x6c, 0x89, 0x7d, 0xee, 0xbb,
-+	0x52, 0xdd, 0x1f, 0x18, 0xe7, 0x13, 0x6b, 0x33,
-+	0x0e, 0xea, 0x36, 0x92, 0x77, 0x7b, 0x6d, 0x9c,
-+	0x5a, 0x5f, 0x45, 0x7b, 0x7b, 0x35, 0x62, 0x23,
-+	0xd1, 0xbf, 0x0f, 0xd0, 0x08, 0x1b, 0x2b, 0x80,
-+	0x6b, 0x7e, 0xf1, 0x21, 0x47, 0xb0, 0x57, 0xd1,
-+	0x98, 0x72, 0x90, 0x34, 0x1c, 0x20, 0x04, 0xff,
-+	0x3d, 0x5c, 0xee, 0x0e, 0x57, 0x5f, 0x6f, 0x24,
-+	0x4e, 0x3c, 0xea, 0xfc, 0xa5, 0xa9, 0x83, 0xc9,
-+	0x61, 0xb4, 0x51, 0x24, 0xf8, 0x27, 0x5e, 0x46,
-+	0x8c, 0xb1, 0x53, 0x02, 0x96, 0x35, 0xba, 0xb8,
-+	0x4c, 0x71, 0xd3, 0x15, 0x59, 0x35, 0x22, 0x20,
-+	0xad, 0x03, 0x9f, 0x66, 0x44, 0x3b, 0x9c, 0x35,
-+	0x37, 0x1f, 0x9b, 0xbb, 0xf3, 0xdb, 0x35, 0x63,
-+	0x30, 0x64, 0xaa, 0xa2, 0x06, 0xa8, 0x5d, 0xbb,
-+	0xe1, 0x9f, 0x70, 0xec, 0x82, 0x11, 0x06, 0x36,
-+	0xec, 0x8b, 0x69, 0x66, 0x24, 0x44, 0xc9, 0x4a,
-+	0x57, 0xbb, 0x9b, 0x78, 0x13, 0xce, 0x9c, 0x0c,
-+	0xba, 0x92, 0x93, 0x63, 0xb8, 0xe2, 0x95, 0x0f,
-+	0x0f, 0x16, 0x39, 0x52, 0xfd, 0x3a, 0x6d, 0x02,
-+	0x4b, 0xdf, 0x13, 0xd3, 0x2a, 0x22, 0xb4, 0x03,
-+	0x7c, 0x54, 0x49, 0x96, 0x68, 0x54, 0x10, 0xfa,
-+	0xef, 0xaa, 0x6c, 0xe8, 0x22, 0xdc, 0x71, 0x16,
-+	0x13, 0x1a, 0xf6, 0x28, 0xe5, 0x6d, 0x77, 0x3d,
-+	0xcd, 0x30, 0x63, 0xb1, 0x70, 0x52, 0xa1, 0xc5,
-+	0x94, 0x5f, 0xcf, 0xe8, 0xb8, 0x26, 0x98, 0xf7,
-+	0x06, 0xa0, 0x0a, 0x70, 0xfa, 0x03, 0x80, 0xac,
-+	0xc1, 0xec, 0xd6, 0x4c, 0x54, 0xd7, 0xfe, 0x47,
-+	0xb6, 0x88, 0x4a, 0xf7, 0x71, 0x24, 0xee, 0xf3,
-+	0xd2, 0xc2, 0x4a, 0x7f, 0xfe, 0x61, 0xc7, 0x35,
-+	0xc9, 0x37, 0x67, 0xcb, 0x24, 0x35, 0xda, 0x7e,
-+	0xca, 0x5f, 0xf3, 0x8d, 0xd4, 0x13, 0x8e, 0xd6,
-+	0xcb, 0x4d, 0x53, 0x8f, 0x53, 0x1f, 0xc0, 0x74,
-+	0xf7, 0x53, 0xb9, 0x5e, 0x23, 0x37, 0xba, 0x6e,
-+	0xe3, 0x9d, 0x07, 0x55, 0x25, 0x7b, 0xe6, 0x2a,
-+	0x64, 0xd1, 0x32, 0xdd, 0x54, 0x1b, 0x4b, 0xc0,
-+	0xe1, 0xd7, 0x69, 0x58, 0xf8, 0x93, 0x29, 0xc4,
-+	0xdd, 0x23, 0x2f, 0xa5, 0xfc, 0x9d, 0x7e, 0xf8,
-+	0xd4, 0x90, 0xcd, 0x82, 0x55, 0xdc, 0x16, 0x16,
-+	0x9f, 0x07, 0x52, 0x9b, 0x9d, 0x25, 0xed, 0x32,
-+	0xc5, 0x7b, 0xdf, 0xf6, 0x83, 0x46, 0x3d, 0x65,
-+	0xb7, 0xef, 0x87, 0x7a, 0x12, 0x69, 0x8f, 0x06,
-+	0x7c, 0x51, 0x15, 0x4a, 0x08, 0xe8, 0xac, 0x9a,
-+	0x0c, 0x24, 0xa7, 0x27, 0xd8, 0x46, 0x2f, 0xe7,
-+	0x01, 0x0e, 0x1c, 0xc6, 0x91, 0xb0, 0x6e, 0x85,
-+	0x65, 0xf0, 0x29, 0x0d, 0x2e, 0x6b, 0x3b, 0xfb,
-+	0x4b, 0xdf, 0xe4, 0x80, 0x93, 0x03, 0x66, 0x46,
-+	0x3e, 0x8a, 0x6e, 0xf3, 0x5e, 0x4d, 0x62, 0x0e,
-+	0x49, 0x05, 0xaf, 0xd4, 0xf8, 0x21, 0x20, 0x61,
-+	0x1d, 0x39, 0x17, 0xf4, 0x61, 0x47, 0x95, 0xfb,
-+	0x15, 0x2e, 0xb3, 0x4f, 0xd0, 0x5d, 0xf5, 0x7d,
-+	0x40, 0xda, 0x90, 0x3c, 0x6b, 0xcb, 0x17, 0x00,
-+	0x13, 0x3b, 0x64, 0x34, 0x1b, 0xf0, 0xf2, 0xe5,
-+	0x3b, 0xb2, 0xc7, 0xd3, 0x5f, 0x3a, 0x44, 0xa6,
-+	0x9b, 0xb7, 0x78, 0x0e, 0x42, 0x5d, 0x4c, 0xc1,
-+	0xe9, 0xd2, 0xcb, 0xb7, 0x78, 0xd1, 0xfe, 0x9a,
-+	0xb5, 0x07, 0xe9, 0xe0, 0xbe, 0xe2, 0x8a, 0xa7,
-+	0x01, 0x83, 0x00, 0x8c, 0x5c, 0x08, 0xe6, 0x63,
-+	0x12, 0x92, 0xb7, 0xb7, 0xa6, 0x19, 0x7d, 0x38,
-+	0x13, 0x38, 0x92, 0x87, 0x24, 0xf9, 0x48, 0xb3,
-+	0x5e, 0x87, 0x6a, 0x40, 0x39, 0x5c, 0x3f, 0xed,
-+	0x8f, 0xee, 0xdb, 0x15, 0x82, 0x06, 0xda, 0x49,
-+	0x21, 0x2b, 0xb5, 0xbf, 0x32, 0x7c, 0x9f, 0x42,
-+	0x28, 0x63, 0xcf, 0xaf, 0x1e, 0xf8, 0xc6, 0xa0,
-+	0xd1, 0x02, 0x43, 0x57, 0x62, 0xec, 0x9b, 0x0f,
-+	0x01, 0x9e, 0x71, 0xd8, 0x87, 0x9d, 0x01, 0xc1,
-+	0x58, 0x77, 0xd9, 0xaf, 0xb1, 0x10, 0x7e, 0xdd,
-+	0xa6, 0x50, 0x96, 0xe5, 0xf0, 0x72, 0x00, 0x6d,
-+	0x4b, 0xf8, 0x2a, 0x8f, 0x19, 0xf3, 0x22, 0x88,
-+	0x11, 0x4a, 0x8b, 0x7c, 0xfd, 0xb7, 0xed, 0xe1,
-+	0xf6, 0x40, 0x39, 0xe0, 0xe9, 0xf6, 0x3d, 0x25,
-+	0xe6, 0x74, 0x3c, 0x58, 0x57, 0x7f, 0xe1, 0x22,
-+	0x96, 0x47, 0x31, 0x91, 0xba, 0x70, 0x85, 0x28,
-+	0x6b, 0x9f, 0x6e, 0x25, 0xac, 0x23, 0x66, 0x2f,
-+	0x29, 0x88, 0x28, 0xce, 0x8c, 0x5c, 0x88, 0x53,
-+	0xd1, 0x3b, 0xcc, 0x6a, 0x51, 0xb2, 0xe1, 0x28,
-+	0x3f, 0x91, 0xb4, 0x0d, 0x00, 0x3a, 0xe3, 0xf8,
-+	0xc3, 0x8f, 0xd7, 0x96, 0x62, 0x0e, 0x2e, 0xfc,
-+	0xc8, 0x6c, 0x77, 0xa6, 0x1d, 0x22, 0xc1, 0xb8,
-+	0xe6, 0x61, 0xd7, 0x67, 0x36, 0x13, 0x7b, 0xbb,
-+	0x9b, 0x59, 0x09, 0xa6, 0xdf, 0xf7, 0x6b, 0xa3,
-+	0x40, 0x1a, 0xf5, 0x4f, 0xb4, 0xda, 0xd3, 0xf3,
-+	0x81, 0x93, 0xc6, 0x18, 0xd9, 0x26, 0xee, 0xac,
-+	0xf0, 0xaa, 0xdf, 0xc5, 0x9c, 0xca, 0xc2, 0xa2,
-+	0xcc, 0x7b, 0x5c, 0x24, 0xb0, 0xbc, 0xd0, 0x6a,
-+	0x4d, 0x89, 0x09, 0xb8, 0x07, 0xfe, 0x87, 0xad,
-+	0x0a, 0xea, 0xb8, 0x42, 0xf9, 0x5e, 0xb3, 0x3e,
-+	0x36, 0x4c, 0xaf, 0x75, 0x9e, 0x1c, 0xeb, 0xbd,
-+	0xbc, 0xbb, 0x80, 0x40, 0xa7, 0x3a, 0x30, 0xbf,
-+	0xa8, 0x44, 0xf4, 0xeb, 0x38, 0xad, 0x29, 0xba,
-+	0x23, 0xed, 0x41, 0x0c, 0xea, 0xd2, 0xbb, 0x41,
-+	0x18, 0xd6, 0xb9, 0xba, 0x65, 0x2b, 0xa3, 0x91,
-+	0x6d, 0x1f, 0xa9, 0xf4, 0xd1, 0x25, 0x8d, 0x4d,
-+	0x38, 0xff, 0x64, 0xa0, 0xec, 0xde, 0xa6, 0xb6,
-+	0x79, 0xab, 0x8e, 0x33, 0x6c, 0x47, 0xde, 0xaf,
-+	0x94, 0xa4, 0xa5, 0x86, 0x77, 0x55, 0x09, 0x92,
-+	0x81, 0x31, 0x76, 0xc7, 0x34, 0x22, 0x89, 0x8e,
-+	0x3d, 0x26, 0x26, 0xd7, 0xfc, 0x1e, 0x16, 0x72,
-+	0x13, 0x33, 0x63, 0xd5, 0x22, 0xbe, 0xb8, 0x04,
-+	0x34, 0x84, 0x41, 0xbb, 0x80, 0xd0, 0x9f, 0x46,
-+	0x48, 0x07, 0xa7, 0xfc, 0x2b, 0x3a, 0x75, 0x55,
-+	0x8c, 0xc7, 0x6a, 0xbd, 0x7e, 0x46, 0x08, 0x84,
-+	0x0f, 0xd5, 0x74, 0xc0, 0x82, 0x8e, 0xaa, 0x61,
-+	0x05, 0x01, 0xb2, 0x47, 0x6e, 0x20, 0x6a, 0x2d,
-+	0x58, 0x70, 0x48, 0x32, 0xa7, 0x37, 0xd2, 0xb8,
-+	0x82, 0x1a, 0x51, 0xb9, 0x61, 0xdd, 0xfd, 0x9d,
-+	0x6b, 0x0e, 0x18, 0x97, 0xf8, 0x45, 0x5f, 0x87,
-+	0x10, 0xcf, 0x34, 0x72, 0x45, 0x26, 0x49, 0x70,
-+	0xe7, 0xa3, 0x78, 0xe0, 0x52, 0x89, 0x84, 0x94,
-+	0x83, 0x82, 0xc2, 0x69, 0x8f, 0xe3, 0xe1, 0x3f,
-+	0x60, 0x74, 0x88, 0xc4, 0xf7, 0x75, 0x2c, 0xfb,
-+	0xbd, 0xb6, 0xc4, 0x7e, 0x10, 0x0a, 0x6c, 0x90,
-+	0x04, 0x9e, 0xc3, 0x3f, 0x59, 0x7c, 0xce, 0x31,
-+	0x18, 0x60, 0x57, 0x73, 0x46, 0x94, 0x7d, 0x06,
-+	0xa0, 0x6d, 0x44, 0xec, 0xa2, 0x0a, 0x9e, 0x05,
-+	0x15, 0xef, 0xca, 0x5c, 0xbf, 0x00, 0xeb, 0xf7,
-+	0x3d, 0x32, 0xd4, 0xa5, 0xef, 0x49, 0x89, 0x5e,
-+	0x46, 0xb0, 0xa6, 0x63, 0x5b, 0x8a, 0x73, 0xae,
-+	0x6f, 0xd5, 0x9d, 0xf8, 0x4f, 0x40, 0xb5, 0xb2,
-+	0x6e, 0xd3, 0xb6, 0x01, 0xa9, 0x26, 0xa2, 0x21,
-+	0xcf, 0x33, 0x7a, 0x3a, 0xa4, 0x23, 0x13, 0xb0,
-+	0x69, 0x6a, 0xee, 0xce, 0xd8, 0x9d, 0x01, 0x1d,
-+	0x50, 0xc1, 0x30, 0x6c, 0xb1, 0xcd, 0xa0, 0xf0,
-+	0xf0, 0xa2, 0x64, 0x6f, 0xbb, 0xbf, 0x5e, 0xe6,
-+	0xab, 0x87, 0xb4, 0x0f, 0x4f, 0x15, 0xaf, 0xb5,
-+	0x25, 0xa1, 0xb2, 0xd0, 0x80, 0x2c, 0xfb, 0xf9,
-+	0xfe, 0xd2, 0x33, 0xbb, 0x76, 0xfe, 0x7c, 0xa8,
-+	0x66, 0xf7, 0xe7, 0x85, 0x9f, 0x1f, 0x85, 0x57,
-+	0x88, 0xe1, 0xe9, 0x63, 0xe4, 0xd8, 0x1c, 0xa1,
-+	0xfb, 0xda, 0x44, 0x05, 0x2e, 0x1d, 0x3a, 0x1c,
-+	0xff, 0xc8, 0x3b, 0xc0, 0xfe, 0xda, 0x22, 0x0b,
-+	0x43, 0xd6, 0x88, 0x39, 0x4c, 0x4a, 0xa6, 0x69,
-+	0x18, 0x93, 0x42, 0x4e, 0xb5, 0xcc, 0x66, 0x0d,
-+	0x09, 0xf8, 0x1e, 0x7c, 0xd3, 0x3c, 0x99, 0x0d,
-+	0x50, 0x1d, 0x62, 0xe9, 0x57, 0x06, 0xbf, 0x19,
-+	0x88, 0xdd, 0xad, 0x7b, 0x4f, 0xf9, 0xc7, 0x82,
-+	0x6d, 0x8d, 0xc8, 0xc4, 0xc5, 0x78, 0x17, 0x20,
-+	0x15, 0xc5, 0x52, 0x41, 0xcf, 0x5b, 0xd6, 0x7f,
-+	0x94, 0x02, 0x41, 0xe0, 0x40, 0x22, 0x03, 0x5e,
-+	0xd1, 0x53, 0xd4, 0x86, 0xd3, 0x2c, 0x9f, 0x0f,
-+	0x96, 0xe3, 0x6b, 0x9a, 0x76, 0x32, 0x06, 0x47,
-+	0x4b, 0x11, 0xb3, 0xdd, 0x03, 0x65, 0xbd, 0x9b,
-+	0x01, 0xda, 0x9c, 0xb9, 0x7e, 0x3f, 0x6a, 0xc4,
-+	0x7b, 0xea, 0xd4, 0x3c, 0xb9, 0xfb, 0x5c, 0x6b,
-+	0x64, 0x33, 0x52, 0xba, 0x64, 0x78, 0x8f, 0xa4,
-+	0xaf, 0x7a, 0x61, 0x8d, 0xbc, 0xc5, 0x73, 0xe9,
-+	0x6b, 0x58, 0x97, 0x4b, 0xbf, 0x63, 0x22, 0xd3,
-+	0x37, 0x02, 0x54, 0xc5, 0xb9, 0x16, 0x4a, 0xf0,
-+	0x19, 0xd8, 0x94, 0x57, 0xb8, 0x8a, 0xb3, 0x16,
-+	0x3b, 0xd0, 0x84, 0x8e, 0x67, 0xa6, 0xa3, 0x7d,
-+	0x78, 0xec, 0x00
-+};
-+static const u8 enc_output012[] __initconst = {
-+	0x52, 0x34, 0xb3, 0x65, 0x3b, 0xb7, 0xe5, 0xd3,
-+	0xab, 0x49, 0x17, 0x60, 0xd2, 0x52, 0x56, 0xdf,
-+	0xdf, 0x34, 0x56, 0x82, 0xe2, 0xbe, 0xe5, 0xe1,
-+	0x28, 0xd1, 0x4e, 0x5f, 0x4f, 0x01, 0x7d, 0x3f,
-+	0x99, 0x6b, 0x30, 0x6e, 0x1a, 0x7c, 0x4c, 0x8e,
-+	0x62, 0x81, 0xae, 0x86, 0x3f, 0x6b, 0xd0, 0xb5,
-+	0xa9, 0xcf, 0x50, 0xf1, 0x02, 0x12, 0xa0, 0x0b,
-+	0x24, 0xe9, 0xe6, 0x72, 0x89, 0x2c, 0x52, 0x1b,
-+	0x34, 0x38, 0xf8, 0x75, 0x5f, 0xa0, 0x74, 0xe2,
-+	0x99, 0xdd, 0xa6, 0x4b, 0x14, 0x50, 0x4e, 0xf1,
-+	0xbe, 0xd6, 0x9e, 0xdb, 0xb2, 0x24, 0x27, 0x74,
-+	0x12, 0x4a, 0x78, 0x78, 0x17, 0xa5, 0x58, 0x8e,
-+	0x2f, 0xf9, 0xf4, 0x8d, 0xee, 0x03, 0x88, 0xae,
-+	0xb8, 0x29, 0xa1, 0x2f, 0x4b, 0xee, 0x92, 0xbd,
-+	0x87, 0xb3, 0xce, 0x34, 0x21, 0x57, 0x46, 0x04,
-+	0x49, 0x0c, 0x80, 0xf2, 0x01, 0x13, 0xa1, 0x55,
-+	0xb3, 0xff, 0x44, 0x30, 0x3c, 0x1c, 0xd0, 0xef,
-+	0xbc, 0x18, 0x74, 0x26, 0xad, 0x41, 0x5b, 0x5b,
-+	0x3e, 0x9a, 0x7a, 0x46, 0x4f, 0x16, 0xd6, 0x74,
-+	0x5a, 0xb7, 0x3a, 0x28, 0x31, 0xd8, 0xae, 0x26,
-+	0xac, 0x50, 0x53, 0x86, 0xf2, 0x56, 0xd7, 0x3f,
-+	0x29, 0xbc, 0x45, 0x68, 0x8e, 0xcb, 0x98, 0x64,
-+	0xdd, 0xc9, 0xba, 0xb8, 0x4b, 0x7b, 0x82, 0xdd,
-+	0x14, 0xa7, 0xcb, 0x71, 0x72, 0x00, 0x5c, 0xad,
-+	0x7b, 0x6a, 0x89, 0xa4, 0x3d, 0xbf, 0xb5, 0x4b,
-+	0x3e, 0x7c, 0x5a, 0xcf, 0xb8, 0xa1, 0xc5, 0x6e,
-+	0xc8, 0xb6, 0x31, 0x57, 0x7b, 0xdf, 0xa5, 0x7e,
-+	0xb1, 0xd6, 0x42, 0x2a, 0x31, 0x36, 0xd1, 0xd0,
-+	0x3f, 0x7a, 0xe5, 0x94, 0xd6, 0x36, 0xa0, 0x6f,
-+	0xb7, 0x40, 0x7d, 0x37, 0xc6, 0x55, 0x7c, 0x50,
-+	0x40, 0x6d, 0x29, 0x89, 0xe3, 0x5a, 0xae, 0x97,
-+	0xe7, 0x44, 0x49, 0x6e, 0xbd, 0x81, 0x3d, 0x03,
-+	0x93, 0x06, 0x12, 0x06, 0xe2, 0x41, 0x12, 0x4a,
-+	0xf1, 0x6a, 0xa4, 0x58, 0xa2, 0xfb, 0xd2, 0x15,
-+	0xba, 0xc9, 0x79, 0xc9, 0xce, 0x5e, 0x13, 0xbb,
-+	0xf1, 0x09, 0x04, 0xcc, 0xfd, 0xe8, 0x51, 0x34,
-+	0x6a, 0xe8, 0x61, 0x88, 0xda, 0xed, 0x01, 0x47,
-+	0x84, 0xf5, 0x73, 0x25, 0xf9, 0x1c, 0x42, 0x86,
-+	0x07, 0xf3, 0x5b, 0x1a, 0x01, 0xb3, 0xeb, 0x24,
-+	0x32, 0x8d, 0xf6, 0xed, 0x7c, 0x4b, 0xeb, 0x3c,
-+	0x36, 0x42, 0x28, 0xdf, 0xdf, 0xb6, 0xbe, 0xd9,
-+	0x8c, 0x52, 0xd3, 0x2b, 0x08, 0x90, 0x8c, 0xe7,
-+	0x98, 0x31, 0xe2, 0x32, 0x8e, 0xfc, 0x11, 0x48,
-+	0x00, 0xa8, 0x6a, 0x42, 0x4a, 0x02, 0xc6, 0x4b,
-+	0x09, 0xf1, 0xe3, 0x49, 0xf3, 0x45, 0x1f, 0x0e,
-+	0xbc, 0x56, 0xe2, 0xe4, 0xdf, 0xfb, 0xeb, 0x61,
-+	0xfa, 0x24, 0xc1, 0x63, 0x75, 0xbb, 0x47, 0x75,
-+	0xaf, 0xe1, 0x53, 0x16, 0x96, 0x21, 0x85, 0x26,
-+	0x11, 0xb3, 0x76, 0xe3, 0x23, 0xa1, 0x6b, 0x74,
-+	0x37, 0xd0, 0xde, 0x06, 0x90, 0x71, 0x5d, 0x43,
-+	0x88, 0x9b, 0x00, 0x54, 0xa6, 0x75, 0x2f, 0xa1,
-+	0xc2, 0x0b, 0x73, 0x20, 0x1d, 0xb6, 0x21, 0x79,
-+	0x57, 0x3f, 0xfa, 0x09, 0xbe, 0x8a, 0x33, 0xc3,
-+	0x52, 0xf0, 0x1d, 0x82, 0x31, 0xd1, 0x55, 0xb5,
-+	0x6c, 0x99, 0x25, 0xcf, 0x5c, 0x32, 0xce, 0xe9,
-+	0x0d, 0xfa, 0x69, 0x2c, 0xd5, 0x0d, 0xc5, 0x6d,
-+	0x86, 0xd0, 0x0c, 0x3b, 0x06, 0x50, 0x79, 0xe8,
-+	0xc3, 0xae, 0x04, 0xe6, 0xcd, 0x51, 0xe4, 0x26,
-+	0x9b, 0x4f, 0x7e, 0xa6, 0x0f, 0xab, 0xd8, 0xe5,
-+	0xde, 0xa9, 0x00, 0x95, 0xbe, 0xa3, 0x9d, 0x5d,
-+	0xb2, 0x09, 0x70, 0x18, 0x1c, 0xf0, 0xac, 0x29,
-+	0x23, 0x02, 0x29, 0x28, 0xd2, 0x74, 0x35, 0x57,
-+	0x62, 0x0f, 0x24, 0xea, 0x5e, 0x33, 0xc2, 0x92,
-+	0xf3, 0x78, 0x4d, 0x30, 0x1e, 0xa1, 0x99, 0xa9,
-+	0x82, 0xb0, 0x42, 0x31, 0x8d, 0xad, 0x8a, 0xbc,
-+	0xfc, 0xd4, 0x57, 0x47, 0x3e, 0xb4, 0x50, 0xdd,
-+	0x6e, 0x2c, 0x80, 0x4d, 0x22, 0xf1, 0xfb, 0x57,
-+	0xc4, 0xdd, 0x17, 0xe1, 0x8a, 0x36, 0x4a, 0xb3,
-+	0x37, 0xca, 0xc9, 0x4e, 0xab, 0xd5, 0x69, 0xc4,
-+	0xf4, 0xbc, 0x0b, 0x3b, 0x44, 0x4b, 0x29, 0x9c,
-+	0xee, 0xd4, 0x35, 0x22, 0x21, 0xb0, 0x1f, 0x27,
-+	0x64, 0xa8, 0x51, 0x1b, 0xf0, 0x9f, 0x19, 0x5c,
-+	0xfb, 0x5a, 0x64, 0x74, 0x70, 0x45, 0x09, 0xf5,
-+	0x64, 0xfe, 0x1a, 0x2d, 0xc9, 0x14, 0x04, 0x14,
-+	0xcf, 0xd5, 0x7d, 0x60, 0xaf, 0x94, 0x39, 0x94,
-+	0xe2, 0x7d, 0x79, 0x82, 0xd0, 0x65, 0x3b, 0x6b,
-+	0x9c, 0x19, 0x84, 0xb4, 0x6d, 0xb3, 0x0c, 0x99,
-+	0xc0, 0x56, 0xa8, 0xbd, 0x73, 0xce, 0x05, 0x84,
-+	0x3e, 0x30, 0xaa, 0xc4, 0x9b, 0x1b, 0x04, 0x2a,
-+	0x9f, 0xd7, 0x43, 0x2b, 0x23, 0xdf, 0xbf, 0xaa,
-+	0xd5, 0xc2, 0x43, 0x2d, 0x70, 0xab, 0xdc, 0x75,
-+	0xad, 0xac, 0xf7, 0xc0, 0xbe, 0x67, 0xb2, 0x74,
-+	0xed, 0x67, 0x10, 0x4a, 0x92, 0x60, 0xc1, 0x40,
-+	0x50, 0x19, 0x8a, 0x8a, 0x8c, 0x09, 0x0e, 0x72,
-+	0xe1, 0x73, 0x5e, 0xe8, 0x41, 0x85, 0x63, 0x9f,
-+	0x3f, 0xd7, 0x7d, 0xc4, 0xfb, 0x22, 0x5d, 0x92,
-+	0x6c, 0xb3, 0x1e, 0xe2, 0x50, 0x2f, 0x82, 0xa8,
-+	0x28, 0xc0, 0xb5, 0xd7, 0x5f, 0x68, 0x0d, 0x2c,
-+	0x2d, 0xaf, 0x7e, 0xfa, 0x2e, 0x08, 0x0f, 0x1f,
-+	0x70, 0x9f, 0xe9, 0x19, 0x72, 0x55, 0xf8, 0xfb,
-+	0x51, 0xd2, 0x33, 0x5d, 0xa0, 0xd3, 0x2b, 0x0a,
-+	0x6c, 0xbc, 0x4e, 0xcf, 0x36, 0x4d, 0xdc, 0x3b,
-+	0xe9, 0x3e, 0x81, 0x7c, 0x61, 0xdb, 0x20, 0x2d,
-+	0x3a, 0xc3, 0xb3, 0x0c, 0x1e, 0x00, 0xb9, 0x7c,
-+	0xf5, 0xca, 0x10, 0x5f, 0x3a, 0x71, 0xb3, 0xe4,
-+	0x20, 0xdb, 0x0c, 0x2a, 0x98, 0x63, 0x45, 0x00,
-+	0x58, 0xf6, 0x68, 0xe4, 0x0b, 0xda, 0x13, 0x3b,
-+	0x60, 0x5c, 0x76, 0xdb, 0xb9, 0x97, 0x71, 0xe4,
-+	0xd9, 0xb7, 0xdb, 0xbd, 0x68, 0xc7, 0x84, 0x84,
-+	0xaa, 0x7c, 0x68, 0x62, 0x5e, 0x16, 0xfc, 0xba,
-+	0x72, 0xaa, 0x9a, 0xa9, 0xeb, 0x7c, 0x75, 0x47,
-+	0x97, 0x7e, 0xad, 0xe2, 0xd9, 0x91, 0xe8, 0xe4,
-+	0xa5, 0x31, 0xd7, 0x01, 0x8e, 0xa2, 0x11, 0x88,
-+	0x95, 0xb9, 0xf2, 0x9b, 0xd3, 0x7f, 0x1b, 0x81,
-+	0x22, 0xf7, 0x98, 0x60, 0x0a, 0x64, 0xa6, 0xc1,
-+	0xf6, 0x49, 0xc7, 0xe3, 0x07, 0x4d, 0x94, 0x7a,
-+	0xcf, 0x6e, 0x68, 0x0c, 0x1b, 0x3f, 0x6e, 0x2e,
-+	0xee, 0x92, 0xfa, 0x52, 0xb3, 0x59, 0xf8, 0xf1,
-+	0x8f, 0x6a, 0x66, 0xa3, 0x82, 0x76, 0x4a, 0x07,
-+	0x1a, 0xc7, 0xdd, 0xf5, 0xda, 0x9c, 0x3c, 0x24,
-+	0xbf, 0xfd, 0x42, 0xa1, 0x10, 0x64, 0x6a, 0x0f,
-+	0x89, 0xee, 0x36, 0xa5, 0xce, 0x99, 0x48, 0x6a,
-+	0xf0, 0x9f, 0x9e, 0x69, 0xa4, 0x40, 0x20, 0xe9,
-+	0x16, 0x15, 0xf7, 0xdb, 0x75, 0x02, 0xcb, 0xe9,
-+	0x73, 0x8b, 0x3b, 0x49, 0x2f, 0xf0, 0xaf, 0x51,
-+	0x06, 0x5c, 0xdf, 0x27, 0x27, 0x49, 0x6a, 0xd1,
-+	0xcc, 0xc7, 0xb5, 0x63, 0xb5, 0xfc, 0xb8, 0x5c,
-+	0x87, 0x7f, 0x84, 0xb4, 0xcc, 0x14, 0xa9, 0x53,
-+	0xda, 0xa4, 0x56, 0xf8, 0xb6, 0x1b, 0xcc, 0x40,
-+	0x27, 0x52, 0x06, 0x5a, 0x13, 0x81, 0xd7, 0x3a,
-+	0xd4, 0x3b, 0xfb, 0x49, 0x65, 0x31, 0x33, 0xb2,
-+	0xfa, 0xcd, 0xad, 0x58, 0x4e, 0x2b, 0xae, 0xd2,
-+	0x20, 0xfb, 0x1a, 0x48, 0xb4, 0x3f, 0x9a, 0xd8,
-+	0x7a, 0x35, 0x4a, 0xc8, 0xee, 0x88, 0x5e, 0x07,
-+	0x66, 0x54, 0xb9, 0xec, 0x9f, 0xa3, 0xe3, 0xb9,
-+	0x37, 0xaa, 0x49, 0x76, 0x31, 0xda, 0x74, 0x2d,
-+	0x3c, 0xa4, 0x65, 0x10, 0x32, 0x38, 0xf0, 0xde,
-+	0xd3, 0x99, 0x17, 0xaa, 0x71, 0xaa, 0x8f, 0x0f,
-+	0x8c, 0xaf, 0xa2, 0xf8, 0x5d, 0x64, 0xba, 0x1d,
-+	0xa3, 0xef, 0x96, 0x73, 0xe8, 0xa1, 0x02, 0x8d,
-+	0x0c, 0x6d, 0xb8, 0x06, 0x90, 0xb8, 0x08, 0x56,
-+	0x2c, 0xa7, 0x06, 0xc9, 0xc2, 0x38, 0xdb, 0x7c,
-+	0x63, 0xb1, 0x57, 0x8e, 0xea, 0x7c, 0x79, 0xf3,
-+	0x49, 0x1d, 0xfe, 0x9f, 0xf3, 0x6e, 0xb1, 0x1d,
-+	0xba, 0x19, 0x80, 0x1a, 0x0a, 0xd3, 0xb0, 0x26,
-+	0x21, 0x40, 0xb1, 0x7c, 0xf9, 0x4d, 0x8d, 0x10,
-+	0xc1, 0x7e, 0xf4, 0xf6, 0x3c, 0xa8, 0xfd, 0x7c,
-+	0xa3, 0x92, 0xb2, 0x0f, 0xaa, 0xcc, 0xa6, 0x11,
-+	0xfe, 0x04, 0xe3, 0xd1, 0x7a, 0x32, 0x89, 0xdf,
-+	0x0d, 0xc4, 0x8f, 0x79, 0x6b, 0xca, 0x16, 0x7c,
-+	0x6e, 0xf9, 0xad, 0x0f, 0xf6, 0xfe, 0x27, 0xdb,
-+	0xc4, 0x13, 0x70, 0xf1, 0x62, 0x1a, 0x4f, 0x79,
-+	0x40, 0xc9, 0x9b, 0x8b, 0x21, 0xea, 0x84, 0xfa,
-+	0xf5, 0xf1, 0x89, 0xce, 0xb7, 0x55, 0x0a, 0x80,
-+	0x39, 0x2f, 0x55, 0x36, 0x16, 0x9c, 0x7b, 0x08,
-+	0xbd, 0x87, 0x0d, 0xa5, 0x32, 0xf1, 0x52, 0x7c,
-+	0xe8, 0x55, 0x60, 0x5b, 0xd7, 0x69, 0xe4, 0xfc,
-+	0xfa, 0x12, 0x85, 0x96, 0xea, 0x50, 0x28, 0xab,
-+	0x8a, 0xf7, 0xbb, 0x0e, 0x53, 0x74, 0xca, 0xa6,
-+	0x27, 0x09, 0xc2, 0xb5, 0xde, 0x18, 0x14, 0xd9,
-+	0xea, 0xe5, 0x29, 0x1c, 0x40, 0x56, 0xcf, 0xd7,
-+	0xae, 0x05, 0x3f, 0x65, 0xaf, 0x05, 0x73, 0xe2,
-+	0x35, 0x96, 0x27, 0x07, 0x14, 0xc0, 0xad, 0x33,
-+	0xf1, 0xdc, 0x44, 0x7a, 0x89, 0x17, 0x77, 0xd2,
-+	0x9c, 0x58, 0x60, 0xf0, 0x3f, 0x7b, 0x2d, 0x2e,
-+	0x57, 0x95, 0x54, 0x87, 0xed, 0xf2, 0xc7, 0x4c,
-+	0xf0, 0xae, 0x56, 0x29, 0x19, 0x7d, 0x66, 0x4b,
-+	0x9b, 0x83, 0x84, 0x42, 0x3b, 0x01, 0x25, 0x66,
-+	0x8e, 0x02, 0xde, 0xb9, 0x83, 0x54, 0x19, 0xf6,
-+	0x9f, 0x79, 0x0d, 0x67, 0xc5, 0x1d, 0x7a, 0x44,
-+	0x02, 0x98, 0xa7, 0x16, 0x1c, 0x29, 0x0d, 0x74,
-+	0xff, 0x85, 0x40, 0x06, 0xef, 0x2c, 0xa9, 0xc6,
-+	0xf5, 0x53, 0x07, 0x06, 0xae, 0xe4, 0xfa, 0x5f,
-+	0xd8, 0x39, 0x4d, 0xf1, 0x9b, 0x6b, 0xd9, 0x24,
-+	0x84, 0xfe, 0x03, 0x4c, 0xb2, 0x3f, 0xdf, 0xa1,
-+	0x05, 0x9e, 0x50, 0x14, 0x5a, 0xd9, 0x1a, 0xa2,
-+	0xa7, 0xfa, 0xfa, 0x17, 0xf7, 0x78, 0xd6, 0xb5,
-+	0x92, 0x61, 0x91, 0xac, 0x36, 0xfa, 0x56, 0x0d,
-+	0x38, 0x32, 0x18, 0x85, 0x08, 0x58, 0x37, 0xf0,
-+	0x4b, 0xdb, 0x59, 0xe7, 0xa4, 0x34, 0xc0, 0x1b,
-+	0x01, 0xaf, 0x2d, 0xde, 0xa1, 0xaa, 0x5d, 0xd3,
-+	0xec, 0xe1, 0xd4, 0xf7, 0xe6, 0x54, 0x68, 0xf0,
-+	0x51, 0x97, 0xa7, 0x89, 0xea, 0x24, 0xad, 0xd3,
-+	0x6e, 0x47, 0x93, 0x8b, 0x4b, 0xb4, 0xf7, 0x1c,
-+	0x42, 0x06, 0x67, 0xe8, 0x99, 0xf6, 0xf5, 0x7b,
-+	0x85, 0xb5, 0x65, 0xb5, 0xb5, 0xd2, 0x37, 0xf5,
-+	0xf3, 0x02, 0xa6, 0x4d, 0x11, 0xa7, 0xdc, 0x51,
-+	0x09, 0x7f, 0xa0, 0xd8, 0x88, 0x1c, 0x13, 0x71,
-+	0xae, 0x9c, 0xb7, 0x7b, 0x34, 0xd6, 0x4e, 0x68,
-+	0x26, 0x83, 0x51, 0xaf, 0x1d, 0xee, 0x8b, 0xbb,
-+	0x69, 0x43, 0x2b, 0x9e, 0x8a, 0xbc, 0x02, 0x0e,
-+	0xa0, 0x1b, 0xe0, 0xa8, 0x5f, 0x6f, 0xaf, 0x1b,
-+	0x8f, 0xe7, 0x64, 0x71, 0x74, 0x11, 0x7e, 0xa8,
-+	0xd8, 0xf9, 0x97, 0x06, 0xc3, 0xb6, 0xfb, 0xfb,
-+	0xb7, 0x3d, 0x35, 0x9d, 0x3b, 0x52, 0xed, 0x54,
-+	0xca, 0xf4, 0x81, 0x01, 0x2d, 0x1b, 0xc3, 0xa7,
-+	0x00, 0x3d, 0x1a, 0x39, 0x54, 0xe1, 0xf6, 0xff,
-+	0xed, 0x6f, 0x0b, 0x5a, 0x68, 0xda, 0x58, 0xdd,
-+	0xa9, 0xcf, 0x5c, 0x4a, 0xe5, 0x09, 0x4e, 0xde,
-+	0x9d, 0xbc, 0x3e, 0xee, 0x5a, 0x00, 0x3b, 0x2c,
-+	0x87, 0x10, 0x65, 0x60, 0xdd, 0xd7, 0x56, 0xd1,
-+	0x4c, 0x64, 0x45, 0xe4, 0x21, 0xec, 0x78, 0xf8,
-+	0x25, 0x7a, 0x3e, 0x16, 0x5d, 0x09, 0x53, 0x14,
-+	0xbe, 0x4f, 0xae, 0x87, 0xd8, 0xd1, 0xaa, 0x3c,
-+	0xf6, 0x3e, 0xa4, 0x70, 0x8c, 0x5e, 0x70, 0xa4,
-+	0xb3, 0x6b, 0x66, 0x73, 0xd3, 0xbf, 0x31, 0x06,
-+	0x19, 0x62, 0x93, 0x15, 0xf2, 0x86, 0xe4, 0x52,
-+	0x7e, 0x53, 0x4c, 0x12, 0x38, 0xcc, 0x34, 0x7d,
-+	0x57, 0xf6, 0x42, 0x93, 0x8a, 0xc4, 0xee, 0x5c,
-+	0x8a, 0xe1, 0x52, 0x8f, 0x56, 0x64, 0xf6, 0xa6,
-+	0xd1, 0x91, 0x57, 0x70, 0xcd, 0x11, 0x76, 0xf5,
-+	0x59, 0x60, 0x60, 0x3c, 0xc1, 0xc3, 0x0b, 0x7f,
-+	0x58, 0x1a, 0x50, 0x91, 0xf1, 0x68, 0x8f, 0x6e,
-+	0x74, 0x74, 0xa8, 0x51, 0x0b, 0xf7, 0x7a, 0x98,
-+	0x37, 0xf2, 0x0a, 0x0e, 0xa4, 0x97, 0x04, 0xb8,
-+	0x9b, 0xfd, 0xa0, 0xea, 0xf7, 0x0d, 0xe1, 0xdb,
-+	0x03, 0xf0, 0x31, 0x29, 0xf8, 0xdd, 0x6b, 0x8b,
-+	0x5d, 0xd8, 0x59, 0xa9, 0x29, 0xcf, 0x9a, 0x79,
-+	0x89, 0x19, 0x63, 0x46, 0x09, 0x79, 0x6a, 0x11,
-+	0xda, 0x63, 0x68, 0x48, 0x77, 0x23, 0xfb, 0x7d,
-+	0x3a, 0x43, 0xcb, 0x02, 0x3b, 0x7a, 0x6d, 0x10,
-+	0x2a, 0x9e, 0xac, 0xf1, 0xd4, 0x19, 0xf8, 0x23,
-+	0x64, 0x1d, 0x2c, 0x5f, 0xf2, 0xb0, 0x5c, 0x23,
-+	0x27, 0xf7, 0x27, 0x30, 0x16, 0x37, 0xb1, 0x90,
-+	0xab, 0x38, 0xfb, 0x55, 0xcd, 0x78, 0x58, 0xd4,
-+	0x7d, 0x43, 0xf6, 0x45, 0x5e, 0x55, 0x8d, 0xb1,
-+	0x02, 0x65, 0x58, 0xb4, 0x13, 0x4b, 0x36, 0xf7,
-+	0xcc, 0xfe, 0x3d, 0x0b, 0x82, 0xe2, 0x12, 0x11,
-+	0xbb, 0xe6, 0xb8, 0x3a, 0x48, 0x71, 0xc7, 0x50,
-+	0x06, 0x16, 0x3a, 0xe6, 0x7c, 0x05, 0xc7, 0xc8,
-+	0x4d, 0x2f, 0x08, 0x6a, 0x17, 0x9a, 0x95, 0x97,
-+	0x50, 0x68, 0xdc, 0x28, 0x18, 0xc4, 0x61, 0x38,
-+	0xb9, 0xe0, 0x3e, 0x78, 0xdb, 0x29, 0xe0, 0x9f,
-+	0x52, 0xdd, 0xf8, 0x4f, 0x91, 0xc1, 0xd0, 0x33,
-+	0xa1, 0x7a, 0x8e, 0x30, 0x13, 0x82, 0x07, 0x9f,
-+	0xd3, 0x31, 0x0f, 0x23, 0xbe, 0x32, 0x5a, 0x75,
-+	0xcf, 0x96, 0xb2, 0xec, 0xb5, 0x32, 0xac, 0x21,
-+	0xd1, 0x82, 0x33, 0xd3, 0x15, 0x74, 0xbd, 0x90,
-+	0xf1, 0x2c, 0xe6, 0x5f, 0x8d, 0xe3, 0x02, 0xe8,
-+	0xe9, 0xc4, 0xca, 0x96, 0xeb, 0x0e, 0xbc, 0x91,
-+	0xf4, 0xb9, 0xea, 0xd9, 0x1b, 0x75, 0xbd, 0xe1,
-+	0xac, 0x2a, 0x05, 0x37, 0x52, 0x9b, 0x1b, 0x3f,
-+	0x5a, 0xdc, 0x21, 0xc3, 0x98, 0xbb, 0xaf, 0xa3,
-+	0xf2, 0x00, 0xbf, 0x0d, 0x30, 0x89, 0x05, 0xcc,
-+	0xa5, 0x76, 0xf5, 0x06, 0xf0, 0xc6, 0x54, 0x8a,
-+	0x5d, 0xd4, 0x1e, 0xc1, 0xf2, 0xce, 0xb0, 0x62,
-+	0xc8, 0xfc, 0x59, 0x42, 0x9a, 0x90, 0x60, 0x55,
-+	0xfe, 0x88, 0xa5, 0x8b, 0xb8, 0x33, 0x0c, 0x23,
-+	0x24, 0x0d, 0x15, 0x70, 0x37, 0x1e, 0x3d, 0xf6,
-+	0xd2, 0xea, 0x92, 0x10, 0xb2, 0xc4, 0x51, 0xac,
-+	0xf2, 0xac, 0xf3, 0x6b, 0x6c, 0xaa, 0xcf, 0x12,
-+	0xc5, 0x6c, 0x90, 0x50, 0xb5, 0x0c, 0xfc, 0x1a,
-+	0x15, 0x52, 0xe9, 0x26, 0xc6, 0x52, 0xa4, 0xe7,
-+	0x81, 0x69, 0xe1, 0xe7, 0x9e, 0x30, 0x01, 0xec,
-+	0x84, 0x89, 0xb2, 0x0d, 0x66, 0xdd, 0xce, 0x28,
-+	0x5c, 0xec, 0x98, 0x46, 0x68, 0x21, 0x9f, 0x88,
-+	0x3f, 0x1f, 0x42, 0x77, 0xce, 0xd0, 0x61, 0xd4,
-+	0x20, 0xa7, 0xff, 0x53, 0xad, 0x37, 0xd0, 0x17,
-+	0x35, 0xc9, 0xfc, 0xba, 0x0a, 0x78, 0x3f, 0xf2,
-+	0xcc, 0x86, 0x89, 0xe8, 0x4b, 0x3c, 0x48, 0x33,
-+	0x09, 0x7f, 0xc6, 0xc0, 0xdd, 0xb8, 0xfd, 0x7a,
-+	0x66, 0x66, 0x65, 0xeb, 0x47, 0xa7, 0x04, 0x28,
-+	0xa3, 0x19, 0x8e, 0xa9, 0xb1, 0x13, 0x67, 0x62,
-+	0x70, 0xcf, 0xd6
-+};
-+static const u8 enc_assoc012[] __initconst = {
-+	0xb1, 0x69, 0x83, 0x87, 0x30, 0xaa, 0x5d, 0xb8,
-+	0x77, 0xe8, 0x21, 0xff, 0x06, 0x59, 0x35, 0xce,
-+	0x75, 0xfe, 0x38, 0xef, 0xb8, 0x91, 0x43, 0x8c,
-+	0xcf, 0x70, 0xdd, 0x0a, 0x68, 0xbf, 0xd4, 0xbc,
-+	0x16, 0x76, 0x99, 0x36, 0x1e, 0x58, 0x79, 0x5e,
-+	0xd4, 0x29, 0xf7, 0x33, 0x93, 0x48, 0xdb, 0x5f,
-+	0x01, 0xae, 0x9c, 0xb6, 0xe4, 0x88, 0x6d, 0x2b,
-+	0x76, 0x75, 0xe0, 0xf3, 0x74, 0xe2, 0xc9
-+};
-+static const u8 enc_nonce012[] __initconst = {
-+	0x05, 0xa3, 0x93, 0xed, 0x30, 0xc5, 0xa2, 0x06
-+};
-+static const u8 enc_key012[] __initconst = {
-+	0xb3, 0x35, 0x50, 0x03, 0x54, 0x2e, 0x40, 0x5e,
-+	0x8f, 0x59, 0x8e, 0xc5, 0x90, 0xd5, 0x27, 0x2d,
-+	0xba, 0x29, 0x2e, 0xcb, 0x1b, 0x70, 0x44, 0x1e,
-+	0x65, 0x91, 0x6e, 0x2a, 0x79, 0x22, 0xda, 0x64
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input053[] __initconst = {
-+	0x25, 0x6d, 0x40, 0x88, 0x80, 0x94, 0x17, 0x83,
-+	0x55, 0xd3, 0x04, 0x84, 0x64, 0x43, 0xfe, 0xe8,
-+	0xdf, 0x99, 0x47, 0x03, 0x03, 0xfb, 0x3b, 0x7b,
-+	0x80, 0xe0, 0x30, 0xbe, 0xeb, 0xd3, 0x29, 0xbe
-+};
-+static const u8 enc_output053[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0xe6, 0xd3, 0xd7, 0x32, 0x4a, 0x1c, 0xbb, 0xa7,
-+	0x77, 0xbb, 0xb0, 0xec, 0xdd, 0xa3, 0x78, 0x07
-+};
-+static const u8 enc_assoc053[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-+};
-+static const u8 enc_nonce053[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key053[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input054[] __initconst = {
-+	0x25, 0x6d, 0x40, 0x88, 0x80, 0x94, 0x17, 0x83,
-+	0x55, 0xd3, 0x04, 0x84, 0x64, 0x43, 0xfe, 0xe8,
-+	0xdf, 0x99, 0x47, 0x03, 0x03, 0xfb, 0x3b, 0x7b,
-+	0x80, 0xe0, 0x30, 0xbe, 0xeb, 0xd3, 0x29, 0xbe,
-+	0xe3, 0xbc, 0xdb, 0x5b, 0x1e, 0xde, 0xfc, 0xfe,
-+	0x8b, 0xcd, 0xa1, 0xb6, 0xa1, 0x5c, 0x8c, 0x2b,
-+	0x08, 0x69, 0xff, 0xd2, 0xec, 0x5e, 0x26, 0xe5,
-+	0x53, 0xb7, 0xb2, 0x27, 0xfe, 0x87, 0xfd, 0xbd
-+};
-+static const u8 enc_output054[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x06, 0x2d, 0xe6, 0x79, 0x5f, 0x27, 0x4f, 0xd2,
-+	0xa3, 0x05, 0xd7, 0x69, 0x80, 0xbc, 0x9c, 0xce
-+};
-+static const u8 enc_assoc054[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-+};
-+static const u8 enc_nonce054[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key054[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input055[] __initconst = {
-+	0x25, 0x6d, 0x40, 0x88, 0x80, 0x94, 0x17, 0x83,
-+	0x55, 0xd3, 0x04, 0x84, 0x64, 0x43, 0xfe, 0xe8,
-+	0xdf, 0x99, 0x47, 0x03, 0x03, 0xfb, 0x3b, 0x7b,
-+	0x80, 0xe0, 0x30, 0xbe, 0xeb, 0xd3, 0x29, 0xbe,
-+	0xe3, 0xbc, 0xdb, 0x5b, 0x1e, 0xde, 0xfc, 0xfe,
-+	0x8b, 0xcd, 0xa1, 0xb6, 0xa1, 0x5c, 0x8c, 0x2b,
-+	0x08, 0x69, 0xff, 0xd2, 0xec, 0x5e, 0x26, 0xe5,
-+	0x53, 0xb7, 0xb2, 0x27, 0xfe, 0x87, 0xfd, 0xbd,
-+	0x7a, 0xda, 0x44, 0x42, 0x42, 0x69, 0xbf, 0xfa,
-+	0x55, 0x27, 0xf2, 0x70, 0xac, 0xf6, 0x85, 0x02,
-+	0xb7, 0x4c, 0x5a, 0xe2, 0xe6, 0x0c, 0x05, 0x80,
-+	0x98, 0x1a, 0x49, 0x38, 0x45, 0x93, 0x92, 0xc4,
-+	0x9b, 0xb2, 0xf2, 0x84, 0xb6, 0x46, 0xef, 0xc7,
-+	0xf3, 0xf0, 0xb1, 0x36, 0x1d, 0xc3, 0x48, 0xed,
-+	0x77, 0xd3, 0x0b, 0xc5, 0x76, 0x92, 0xed, 0x38,
-+	0xfb, 0xac, 0x01, 0x88, 0x38, 0x04, 0x88, 0xc7
-+};
-+static const u8 enc_output055[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0xd8, 0xb4, 0x79, 0x02, 0xba, 0xae, 0xaf, 0xb3,
-+	0x42, 0x03, 0x05, 0x15, 0x29, 0xaf, 0x28, 0x2e
-+};
-+static const u8 enc_assoc055[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-+};
-+static const u8 enc_nonce055[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key055[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input056[] __initconst = {
-+	0xda, 0x92, 0xbf, 0x77, 0x7f, 0x6b, 0xe8, 0x7c,
-+	0xaa, 0x2c, 0xfb, 0x7b, 0x9b, 0xbc, 0x01, 0x17,
-+	0x20, 0x66, 0xb8, 0xfc, 0xfc, 0x04, 0xc4, 0x84,
-+	0x7f, 0x1f, 0xcf, 0x41, 0x14, 0x2c, 0xd6, 0x41
-+};
-+static const u8 enc_output056[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xb3, 0x89, 0x1c, 0x84, 0x9c, 0xb5, 0x2c, 0x27,
-+	0x74, 0x7e, 0xdf, 0xcf, 0x31, 0x21, 0x3b, 0xb6
-+};
-+static const u8 enc_assoc056[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce056[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key056[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input057[] __initconst = {
-+	0xda, 0x92, 0xbf, 0x77, 0x7f, 0x6b, 0xe8, 0x7c,
-+	0xaa, 0x2c, 0xfb, 0x7b, 0x9b, 0xbc, 0x01, 0x17,
-+	0x20, 0x66, 0xb8, 0xfc, 0xfc, 0x04, 0xc4, 0x84,
-+	0x7f, 0x1f, 0xcf, 0x41, 0x14, 0x2c, 0xd6, 0x41,
-+	0x1c, 0x43, 0x24, 0xa4, 0xe1, 0x21, 0x03, 0x01,
-+	0x74, 0x32, 0x5e, 0x49, 0x5e, 0xa3, 0x73, 0xd4,
-+	0xf7, 0x96, 0x00, 0x2d, 0x13, 0xa1, 0xd9, 0x1a,
-+	0xac, 0x48, 0x4d, 0xd8, 0x01, 0x78, 0x02, 0x42
-+};
-+static const u8 enc_output057[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xf0, 0xc1, 0x2d, 0x26, 0xef, 0x03, 0x02, 0x9b,
-+	0x62, 0xc0, 0x08, 0xda, 0x27, 0xc5, 0xdc, 0x68
-+};
-+static const u8 enc_assoc057[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce057[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key057[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input058[] __initconst = {
-+	0xda, 0x92, 0xbf, 0x77, 0x7f, 0x6b, 0xe8, 0x7c,
-+	0xaa, 0x2c, 0xfb, 0x7b, 0x9b, 0xbc, 0x01, 0x17,
-+	0x20, 0x66, 0xb8, 0xfc, 0xfc, 0x04, 0xc4, 0x84,
-+	0x7f, 0x1f, 0xcf, 0x41, 0x14, 0x2c, 0xd6, 0x41,
-+	0x1c, 0x43, 0x24, 0xa4, 0xe1, 0x21, 0x03, 0x01,
-+	0x74, 0x32, 0x5e, 0x49, 0x5e, 0xa3, 0x73, 0xd4,
-+	0xf7, 0x96, 0x00, 0x2d, 0x13, 0xa1, 0xd9, 0x1a,
-+	0xac, 0x48, 0x4d, 0xd8, 0x01, 0x78, 0x02, 0x42,
-+	0x85, 0x25, 0xbb, 0xbd, 0xbd, 0x96, 0x40, 0x05,
-+	0xaa, 0xd8, 0x0d, 0x8f, 0x53, 0x09, 0x7a, 0xfd,
-+	0x48, 0xb3, 0xa5, 0x1d, 0x19, 0xf3, 0xfa, 0x7f,
-+	0x67, 0xe5, 0xb6, 0xc7, 0xba, 0x6c, 0x6d, 0x3b,
-+	0x64, 0x4d, 0x0d, 0x7b, 0x49, 0xb9, 0x10, 0x38,
-+	0x0c, 0x0f, 0x4e, 0xc9, 0xe2, 0x3c, 0xb7, 0x12,
-+	0x88, 0x2c, 0xf4, 0x3a, 0x89, 0x6d, 0x12, 0xc7,
-+	0x04, 0x53, 0xfe, 0x77, 0xc7, 0xfb, 0x77, 0x38
-+};
-+static const u8 enc_output058[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xee, 0x65, 0x78, 0x30, 0x01, 0xc2, 0x56, 0x91,
-+	0xfa, 0x28, 0xd0, 0xf5, 0xf1, 0xc1, 0xd7, 0x62
-+};
-+static const u8 enc_assoc058[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce058[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key058[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input059[] __initconst = {
-+	0x25, 0x6d, 0x40, 0x08, 0x80, 0x94, 0x17, 0x03,
-+	0x55, 0xd3, 0x04, 0x04, 0x64, 0x43, 0xfe, 0x68,
-+	0xdf, 0x99, 0x47, 0x83, 0x03, 0xfb, 0x3b, 0xfb,
-+	0x80, 0xe0, 0x30, 0x3e, 0xeb, 0xd3, 0x29, 0x3e
-+};
-+static const u8 enc_output059[] __initconst = {
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x79, 0xba, 0x7a, 0x29, 0xf5, 0xa7, 0xbb, 0x75,
-+	0x79, 0x7a, 0xf8, 0x7a, 0x61, 0x01, 0x29, 0xa4
-+};
-+static const u8 enc_assoc059[] __initconst = {
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80
-+};
-+static const u8 enc_nonce059[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key059[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input060[] __initconst = {
-+	0x25, 0x6d, 0x40, 0x08, 0x80, 0x94, 0x17, 0x03,
-+	0x55, 0xd3, 0x04, 0x04, 0x64, 0x43, 0xfe, 0x68,
-+	0xdf, 0x99, 0x47, 0x83, 0x03, 0xfb, 0x3b, 0xfb,
-+	0x80, 0xe0, 0x30, 0x3e, 0xeb, 0xd3, 0x29, 0x3e,
-+	0xe3, 0xbc, 0xdb, 0xdb, 0x1e, 0xde, 0xfc, 0x7e,
-+	0x8b, 0xcd, 0xa1, 0x36, 0xa1, 0x5c, 0x8c, 0xab,
-+	0x08, 0x69, 0xff, 0x52, 0xec, 0x5e, 0x26, 0x65,
-+	0x53, 0xb7, 0xb2, 0xa7, 0xfe, 0x87, 0xfd, 0x3d
-+};
-+static const u8 enc_output060[] __initconst = {
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x36, 0xb1, 0x74, 0x38, 0x19, 0xe1, 0xb9, 0xba,
-+	0x15, 0x51, 0xe8, 0xed, 0x92, 0x2a, 0x95, 0x9a
-+};
-+static const u8 enc_assoc060[] __initconst = {
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80
-+};
-+static const u8 enc_nonce060[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key060[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input061[] __initconst = {
-+	0x25, 0x6d, 0x40, 0x08, 0x80, 0x94, 0x17, 0x03,
-+	0x55, 0xd3, 0x04, 0x04, 0x64, 0x43, 0xfe, 0x68,
-+	0xdf, 0x99, 0x47, 0x83, 0x03, 0xfb, 0x3b, 0xfb,
-+	0x80, 0xe0, 0x30, 0x3e, 0xeb, 0xd3, 0x29, 0x3e,
-+	0xe3, 0xbc, 0xdb, 0xdb, 0x1e, 0xde, 0xfc, 0x7e,
-+	0x8b, 0xcd, 0xa1, 0x36, 0xa1, 0x5c, 0x8c, 0xab,
-+	0x08, 0x69, 0xff, 0x52, 0xec, 0x5e, 0x26, 0x65,
-+	0x53, 0xb7, 0xb2, 0xa7, 0xfe, 0x87, 0xfd, 0x3d,
-+	0x7a, 0xda, 0x44, 0xc2, 0x42, 0x69, 0xbf, 0x7a,
-+	0x55, 0x27, 0xf2, 0xf0, 0xac, 0xf6, 0x85, 0x82,
-+	0xb7, 0x4c, 0x5a, 0x62, 0xe6, 0x0c, 0x05, 0x00,
-+	0x98, 0x1a, 0x49, 0xb8, 0x45, 0x93, 0x92, 0x44,
-+	0x9b, 0xb2, 0xf2, 0x04, 0xb6, 0x46, 0xef, 0x47,
-+	0xf3, 0xf0, 0xb1, 0xb6, 0x1d, 0xc3, 0x48, 0x6d,
-+	0x77, 0xd3, 0x0b, 0x45, 0x76, 0x92, 0xed, 0xb8,
-+	0xfb, 0xac, 0x01, 0x08, 0x38, 0x04, 0x88, 0x47
-+};
-+static const u8 enc_output061[] __initconst = {
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0xfe, 0xac, 0x49, 0x55, 0x55, 0x4e, 0x80, 0x6f,
-+	0x3a, 0x19, 0x02, 0xe2, 0x44, 0x32, 0xc0, 0x8a
-+};
-+static const u8 enc_assoc061[] __initconst = {
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80
-+};
-+static const u8 enc_nonce061[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key061[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input062[] __initconst = {
-+	0xda, 0x92, 0xbf, 0xf7, 0x7f, 0x6b, 0xe8, 0xfc,
-+	0xaa, 0x2c, 0xfb, 0xfb, 0x9b, 0xbc, 0x01, 0x97,
-+	0x20, 0x66, 0xb8, 0x7c, 0xfc, 0x04, 0xc4, 0x04,
-+	0x7f, 0x1f, 0xcf, 0xc1, 0x14, 0x2c, 0xd6, 0xc1
-+};
-+static const u8 enc_output062[] __initconst = {
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0x20, 0xa3, 0x79, 0x8d, 0xf1, 0x29, 0x2c, 0x59,
-+	0x72, 0xbf, 0x97, 0x41, 0xae, 0xc3, 0x8a, 0x19
-+};
-+static const u8 enc_assoc062[] __initconst = {
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f
-+};
-+static const u8 enc_nonce062[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key062[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input063[] __initconst = {
-+	0xda, 0x92, 0xbf, 0xf7, 0x7f, 0x6b, 0xe8, 0xfc,
-+	0xaa, 0x2c, 0xfb, 0xfb, 0x9b, 0xbc, 0x01, 0x97,
-+	0x20, 0x66, 0xb8, 0x7c, 0xfc, 0x04, 0xc4, 0x04,
-+	0x7f, 0x1f, 0xcf, 0xc1, 0x14, 0x2c, 0xd6, 0xc1,
-+	0x1c, 0x43, 0x24, 0x24, 0xe1, 0x21, 0x03, 0x81,
-+	0x74, 0x32, 0x5e, 0xc9, 0x5e, 0xa3, 0x73, 0x54,
-+	0xf7, 0x96, 0x00, 0xad, 0x13, 0xa1, 0xd9, 0x9a,
-+	0xac, 0x48, 0x4d, 0x58, 0x01, 0x78, 0x02, 0xc2
-+};
-+static const u8 enc_output063[] __initconst = {
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xc0, 0x3d, 0x9f, 0x67, 0x35, 0x4a, 0x97, 0xb2,
-+	0xf0, 0x74, 0xf7, 0x55, 0x15, 0x57, 0xe4, 0x9c
-+};
-+static const u8 enc_assoc063[] __initconst = {
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f
-+};
-+static const u8 enc_nonce063[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key063[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input064[] __initconst = {
-+	0xda, 0x92, 0xbf, 0xf7, 0x7f, 0x6b, 0xe8, 0xfc,
-+	0xaa, 0x2c, 0xfb, 0xfb, 0x9b, 0xbc, 0x01, 0x97,
-+	0x20, 0x66, 0xb8, 0x7c, 0xfc, 0x04, 0xc4, 0x04,
-+	0x7f, 0x1f, 0xcf, 0xc1, 0x14, 0x2c, 0xd6, 0xc1,
-+	0x1c, 0x43, 0x24, 0x24, 0xe1, 0x21, 0x03, 0x81,
-+	0x74, 0x32, 0x5e, 0xc9, 0x5e, 0xa3, 0x73, 0x54,
-+	0xf7, 0x96, 0x00, 0xad, 0x13, 0xa1, 0xd9, 0x9a,
-+	0xac, 0x48, 0x4d, 0x58, 0x01, 0x78, 0x02, 0xc2,
-+	0x85, 0x25, 0xbb, 0x3d, 0xbd, 0x96, 0x40, 0x85,
-+	0xaa, 0xd8, 0x0d, 0x0f, 0x53, 0x09, 0x7a, 0x7d,
-+	0x48, 0xb3, 0xa5, 0x9d, 0x19, 0xf3, 0xfa, 0xff,
-+	0x67, 0xe5, 0xb6, 0x47, 0xba, 0x6c, 0x6d, 0xbb,
-+	0x64, 0x4d, 0x0d, 0xfb, 0x49, 0xb9, 0x10, 0xb8,
-+	0x0c, 0x0f, 0x4e, 0x49, 0xe2, 0x3c, 0xb7, 0x92,
-+	0x88, 0x2c, 0xf4, 0xba, 0x89, 0x6d, 0x12, 0x47,
-+	0x04, 0x53, 0xfe, 0xf7, 0xc7, 0xfb, 0x77, 0xb8
-+};
-+static const u8 enc_output064[] __initconst = {
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xc8, 0x6d, 0xa8, 0xdd, 0x65, 0x22, 0x86, 0xd5,
-+	0x02, 0x13, 0xd3, 0x28, 0xd6, 0x3e, 0x40, 0x06
-+};
-+static const u8 enc_assoc064[] __initconst = {
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f
-+};
-+static const u8 enc_nonce064[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key064[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input065[] __initconst = {
-+	0x5a, 0x92, 0xbf, 0x77, 0xff, 0x6b, 0xe8, 0x7c,
-+	0x2a, 0x2c, 0xfb, 0x7b, 0x1b, 0xbc, 0x01, 0x17,
-+	0xa0, 0x66, 0xb8, 0xfc, 0x7c, 0x04, 0xc4, 0x84,
-+	0xff, 0x1f, 0xcf, 0x41, 0x94, 0x2c, 0xd6, 0x41
-+};
-+static const u8 enc_output065[] __initconst = {
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0xbe, 0xde, 0x90, 0x83, 0xce, 0xb3, 0x6d, 0xdf,
-+	0xe5, 0xfa, 0x81, 0x1f, 0x95, 0x47, 0x1c, 0x67
-+};
-+static const u8 enc_assoc065[] __initconst = {
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce065[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key065[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input066[] __initconst = {
-+	0x5a, 0x92, 0xbf, 0x77, 0xff, 0x6b, 0xe8, 0x7c,
-+	0x2a, 0x2c, 0xfb, 0x7b, 0x1b, 0xbc, 0x01, 0x17,
-+	0xa0, 0x66, 0xb8, 0xfc, 0x7c, 0x04, 0xc4, 0x84,
-+	0xff, 0x1f, 0xcf, 0x41, 0x94, 0x2c, 0xd6, 0x41,
-+	0x9c, 0x43, 0x24, 0xa4, 0x61, 0x21, 0x03, 0x01,
-+	0xf4, 0x32, 0x5e, 0x49, 0xde, 0xa3, 0x73, 0xd4,
-+	0x77, 0x96, 0x00, 0x2d, 0x93, 0xa1, 0xd9, 0x1a,
-+	0x2c, 0x48, 0x4d, 0xd8, 0x81, 0x78, 0x02, 0x42
-+};
-+static const u8 enc_output066[] __initconst = {
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x30, 0x08, 0x74, 0xbb, 0x06, 0x92, 0xb6, 0x89,
-+	0xde, 0xad, 0x9a, 0xe1, 0x5b, 0x06, 0x73, 0x90
-+};
-+static const u8 enc_assoc066[] __initconst = {
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce066[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key066[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input067[] __initconst = {
-+	0x5a, 0x92, 0xbf, 0x77, 0xff, 0x6b, 0xe8, 0x7c,
-+	0x2a, 0x2c, 0xfb, 0x7b, 0x1b, 0xbc, 0x01, 0x17,
-+	0xa0, 0x66, 0xb8, 0xfc, 0x7c, 0x04, 0xc4, 0x84,
-+	0xff, 0x1f, 0xcf, 0x41, 0x94, 0x2c, 0xd6, 0x41,
-+	0x9c, 0x43, 0x24, 0xa4, 0x61, 0x21, 0x03, 0x01,
-+	0xf4, 0x32, 0x5e, 0x49, 0xde, 0xa3, 0x73, 0xd4,
-+	0x77, 0x96, 0x00, 0x2d, 0x93, 0xa1, 0xd9, 0x1a,
-+	0x2c, 0x48, 0x4d, 0xd8, 0x81, 0x78, 0x02, 0x42,
-+	0x05, 0x25, 0xbb, 0xbd, 0x3d, 0x96, 0x40, 0x05,
-+	0x2a, 0xd8, 0x0d, 0x8f, 0xd3, 0x09, 0x7a, 0xfd,
-+	0xc8, 0xb3, 0xa5, 0x1d, 0x99, 0xf3, 0xfa, 0x7f,
-+	0xe7, 0xe5, 0xb6, 0xc7, 0x3a, 0x6c, 0x6d, 0x3b,
-+	0xe4, 0x4d, 0x0d, 0x7b, 0xc9, 0xb9, 0x10, 0x38,
-+	0x8c, 0x0f, 0x4e, 0xc9, 0x62, 0x3c, 0xb7, 0x12,
-+	0x08, 0x2c, 0xf4, 0x3a, 0x09, 0x6d, 0x12, 0xc7,
-+	0x84, 0x53, 0xfe, 0x77, 0x47, 0xfb, 0x77, 0x38
-+};
-+static const u8 enc_output067[] __initconst = {
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x99, 0xca, 0xd8, 0x5f, 0x45, 0xca, 0x40, 0x94,
-+	0x2d, 0x0d, 0x4d, 0x5e, 0x95, 0x0a, 0xde, 0x22
-+};
-+static const u8 enc_assoc067[] __initconst = {
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff,
-+	0x7f, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce067[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key067[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input068[] __initconst = {
-+	0x25, 0x6d, 0x40, 0x88, 0x7f, 0x6b, 0xe8, 0x7c,
-+	0x55, 0xd3, 0x04, 0x84, 0x9b, 0xbc, 0x01, 0x17,
-+	0xdf, 0x99, 0x47, 0x03, 0xfc, 0x04, 0xc4, 0x84,
-+	0x80, 0xe0, 0x30, 0xbe, 0x14, 0x2c, 0xd6, 0x41
-+};
-+static const u8 enc_output068[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x8b, 0xbe, 0x14, 0x52, 0x72, 0xe7, 0xc2, 0xd9,
-+	0xa1, 0x89, 0x1a, 0x3a, 0xb0, 0x98, 0x3d, 0x9d
-+};
-+static const u8 enc_assoc068[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce068[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key068[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input069[] __initconst = {
-+	0x25, 0x6d, 0x40, 0x88, 0x7f, 0x6b, 0xe8, 0x7c,
-+	0x55, 0xd3, 0x04, 0x84, 0x9b, 0xbc, 0x01, 0x17,
-+	0xdf, 0x99, 0x47, 0x03, 0xfc, 0x04, 0xc4, 0x84,
-+	0x80, 0xe0, 0x30, 0xbe, 0x14, 0x2c, 0xd6, 0x41,
-+	0xe3, 0xbc, 0xdb, 0x5b, 0xe1, 0x21, 0x03, 0x01,
-+	0x8b, 0xcd, 0xa1, 0xb6, 0x5e, 0xa3, 0x73, 0xd4,
-+	0x08, 0x69, 0xff, 0xd2, 0x13, 0xa1, 0xd9, 0x1a,
-+	0x53, 0xb7, 0xb2, 0x27, 0x01, 0x78, 0x02, 0x42
-+};
-+static const u8 enc_output069[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x3b, 0x41, 0x86, 0x19, 0x13, 0xa8, 0xf6, 0xde,
-+	0x7f, 0x61, 0xe2, 0x25, 0x63, 0x1b, 0xc3, 0x82
-+};
-+static const u8 enc_assoc069[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce069[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key069[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input070[] __initconst = {
-+	0x25, 0x6d, 0x40, 0x88, 0x7f, 0x6b, 0xe8, 0x7c,
-+	0x55, 0xd3, 0x04, 0x84, 0x9b, 0xbc, 0x01, 0x17,
-+	0xdf, 0x99, 0x47, 0x03, 0xfc, 0x04, 0xc4, 0x84,
-+	0x80, 0xe0, 0x30, 0xbe, 0x14, 0x2c, 0xd6, 0x41,
-+	0xe3, 0xbc, 0xdb, 0x5b, 0xe1, 0x21, 0x03, 0x01,
-+	0x8b, 0xcd, 0xa1, 0xb6, 0x5e, 0xa3, 0x73, 0xd4,
-+	0x08, 0x69, 0xff, 0xd2, 0x13, 0xa1, 0xd9, 0x1a,
-+	0x53, 0xb7, 0xb2, 0x27, 0x01, 0x78, 0x02, 0x42,
-+	0x7a, 0xda, 0x44, 0x42, 0xbd, 0x96, 0x40, 0x05,
-+	0x55, 0x27, 0xf2, 0x70, 0x53, 0x09, 0x7a, 0xfd,
-+	0xb7, 0x4c, 0x5a, 0xe2, 0x19, 0xf3, 0xfa, 0x7f,
-+	0x98, 0x1a, 0x49, 0x38, 0xba, 0x6c, 0x6d, 0x3b,
-+	0x9b, 0xb2, 0xf2, 0x84, 0x49, 0xb9, 0x10, 0x38,
-+	0xf3, 0xf0, 0xb1, 0x36, 0xe2, 0x3c, 0xb7, 0x12,
-+	0x77, 0xd3, 0x0b, 0xc5, 0x89, 0x6d, 0x12, 0xc7,
-+	0xfb, 0xac, 0x01, 0x88, 0xc7, 0xfb, 0x77, 0x38
-+};
-+static const u8 enc_output070[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x84, 0x28, 0xbc, 0xf0, 0x23, 0xec, 0x6b, 0xf3,
-+	0x1f, 0xd9, 0xef, 0xb2, 0x03, 0xff, 0x08, 0x71
-+};
-+static const u8 enc_assoc070[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce070[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key070[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input071[] __initconst = {
-+	0xda, 0x92, 0xbf, 0x77, 0x80, 0x94, 0x17, 0x83,
-+	0xaa, 0x2c, 0xfb, 0x7b, 0x64, 0x43, 0xfe, 0xe8,
-+	0x20, 0x66, 0xb8, 0xfc, 0x03, 0xfb, 0x3b, 0x7b,
-+	0x7f, 0x1f, 0xcf, 0x41, 0xeb, 0xd3, 0x29, 0xbe
-+};
-+static const u8 enc_output071[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0x13, 0x9f, 0xdf, 0x64, 0x74, 0xea, 0x24, 0xf5,
-+	0x49, 0xb0, 0x75, 0x82, 0x5f, 0x2c, 0x76, 0x20
-+};
-+static const u8 enc_assoc071[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00
-+};
-+static const u8 enc_nonce071[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key071[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input072[] __initconst = {
-+	0xda, 0x92, 0xbf, 0x77, 0x80, 0x94, 0x17, 0x83,
-+	0xaa, 0x2c, 0xfb, 0x7b, 0x64, 0x43, 0xfe, 0xe8,
-+	0x20, 0x66, 0xb8, 0xfc, 0x03, 0xfb, 0x3b, 0x7b,
-+	0x7f, 0x1f, 0xcf, 0x41, 0xeb, 0xd3, 0x29, 0xbe,
-+	0x1c, 0x43, 0x24, 0xa4, 0x1e, 0xde, 0xfc, 0xfe,
-+	0x74, 0x32, 0x5e, 0x49, 0xa1, 0x5c, 0x8c, 0x2b,
-+	0xf7, 0x96, 0x00, 0x2d, 0xec, 0x5e, 0x26, 0xe5,
-+	0xac, 0x48, 0x4d, 0xd8, 0xfe, 0x87, 0xfd, 0xbd
-+};
-+static const u8 enc_output072[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xbb, 0xad, 0x8d, 0x86, 0x3b, 0x83, 0x5a, 0x8e,
-+	0x86, 0x64, 0xfd, 0x1d, 0x45, 0x66, 0xb6, 0xb4
-+};
-+static const u8 enc_assoc072[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00
-+};
-+static const u8 enc_nonce072[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key072[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input073[] __initconst = {
-+	0xda, 0x92, 0xbf, 0x77, 0x80, 0x94, 0x17, 0x83,
-+	0xaa, 0x2c, 0xfb, 0x7b, 0x64, 0x43, 0xfe, 0xe8,
-+	0x20, 0x66, 0xb8, 0xfc, 0x03, 0xfb, 0x3b, 0x7b,
-+	0x7f, 0x1f, 0xcf, 0x41, 0xeb, 0xd3, 0x29, 0xbe,
-+	0x1c, 0x43, 0x24, 0xa4, 0x1e, 0xde, 0xfc, 0xfe,
-+	0x74, 0x32, 0x5e, 0x49, 0xa1, 0x5c, 0x8c, 0x2b,
-+	0xf7, 0x96, 0x00, 0x2d, 0xec, 0x5e, 0x26, 0xe5,
-+	0xac, 0x48, 0x4d, 0xd8, 0xfe, 0x87, 0xfd, 0xbd,
-+	0x85, 0x25, 0xbb, 0xbd, 0x42, 0x69, 0xbf, 0xfa,
-+	0xaa, 0xd8, 0x0d, 0x8f, 0xac, 0xf6, 0x85, 0x02,
-+	0x48, 0xb3, 0xa5, 0x1d, 0xe6, 0x0c, 0x05, 0x80,
-+	0x67, 0xe5, 0xb6, 0xc7, 0x45, 0x93, 0x92, 0xc4,
-+	0x64, 0x4d, 0x0d, 0x7b, 0xb6, 0x46, 0xef, 0xc7,
-+	0x0c, 0x0f, 0x4e, 0xc9, 0x1d, 0xc3, 0x48, 0xed,
-+	0x88, 0x2c, 0xf4, 0x3a, 0x76, 0x92, 0xed, 0x38,
-+	0x04, 0x53, 0xfe, 0x77, 0x38, 0x04, 0x88, 0xc7
-+};
-+static const u8 enc_output073[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0x42, 0xf2, 0x35, 0x42, 0x97, 0x84, 0x9a, 0x51,
-+	0x1d, 0x53, 0xe5, 0x57, 0x17, 0x72, 0xf7, 0x1f
-+};
-+static const u8 enc_assoc073[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00
-+};
-+static const u8 enc_nonce073[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0xee, 0x32, 0x00
-+};
-+static const u8 enc_key073[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - checking for int overflows */
-+static const u8 enc_input076[] __initconst = {
-+	0x1b, 0x99, 0x6f, 0x9a, 0x3c, 0xcc, 0x67, 0x85,
-+	0xde, 0x22, 0xff, 0x5b, 0x8a, 0xdd, 0x95, 0x02,
-+	0xce, 0x03, 0xa0, 0xfa, 0xf5, 0x99, 0x2a, 0x09,
-+	0x52, 0x2c, 0xdd, 0x12, 0x06, 0xd2, 0x20, 0xb8,
-+	0xf8, 0xbd, 0x07, 0xd1, 0xf1, 0xf5, 0xa1, 0xbd,
-+	0x9a, 0x71, 0xd1, 0x1c, 0x7f, 0x57, 0x9b, 0x85,
-+	0x58, 0x18, 0xc0, 0x8d, 0x4d, 0xe0, 0x36, 0x39,
-+	0x31, 0x83, 0xb7, 0xf5, 0x90, 0xb3, 0x35, 0xae,
-+	0xd8, 0xde, 0x5b, 0x57, 0xb1, 0x3c, 0x5f, 0xed,
-+	0xe2, 0x44, 0x1c, 0x3e, 0x18, 0x4a, 0xa9, 0xd4,
-+	0x6e, 0x61, 0x59, 0x85, 0x06, 0xb3, 0xe1, 0x1c,
-+	0x43, 0xc6, 0x2c, 0xbc, 0xac, 0xec, 0xed, 0x33,
-+	0x19, 0x08, 0x75, 0xb0, 0x12, 0x21, 0x8b, 0x19,
-+	0x30, 0xfb, 0x7c, 0x38, 0xec, 0x45, 0xac, 0x11,
-+	0xc3, 0x53, 0xd0, 0xcf, 0x93, 0x8d, 0xcc, 0xb9,
-+	0xef, 0xad, 0x8f, 0xed, 0xbe, 0x46, 0xda, 0xa5
-+};
-+static const u8 enc_output076[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x4b, 0x0b, 0xda, 0x8a, 0xd0, 0x43, 0x83, 0x0d,
-+	0x83, 0x19, 0xab, 0x82, 0xc5, 0x0c, 0x76, 0x63
-+};
-+static const u8 enc_assoc076[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce076[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xb4, 0xf0
-+};
-+static const u8 enc_key076[] __initconst = {
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30
-+};
-+
-+/* wycheproof - checking for int overflows */
-+static const u8 enc_input077[] __initconst = {
-+	0x86, 0xcb, 0xac, 0xae, 0x4d, 0x3f, 0x74, 0xae,
-+	0x01, 0x21, 0x3e, 0x05, 0x51, 0xcc, 0x15, 0x16,
-+	0x0e, 0xa1, 0xbe, 0x84, 0x08, 0xe3, 0xd5, 0xd7,
-+	0x4f, 0x01, 0x46, 0x49, 0x95, 0xa6, 0x9e, 0x61,
-+	0x76, 0xcb, 0x9e, 0x02, 0xb2, 0x24, 0x7e, 0xd2,
-+	0x99, 0x89, 0x2f, 0x91, 0x82, 0xa4, 0x5c, 0xaf,
-+	0x4c, 0x69, 0x40, 0x56, 0x11, 0x76, 0x6e, 0xdf,
-+	0xaf, 0xdc, 0x28, 0x55, 0x19, 0xea, 0x30, 0x48,
-+	0x0c, 0x44, 0xf0, 0x5e, 0x78, 0x1e, 0xac, 0xf8,
-+	0xfc, 0xec, 0xc7, 0x09, 0x0a, 0xbb, 0x28, 0xfa,
-+	0x5f, 0xd5, 0x85, 0xac, 0x8c, 0xda, 0x7e, 0x87,
-+	0x72, 0xe5, 0x94, 0xe4, 0xce, 0x6c, 0x88, 0x32,
-+	0x81, 0x93, 0x2e, 0x0f, 0x89, 0xf8, 0x77, 0xa1,
-+	0xf0, 0x4d, 0x9c, 0x32, 0xb0, 0x6c, 0xf9, 0x0b,
-+	0x0e, 0x76, 0x2b, 0x43, 0x0c, 0x4d, 0x51, 0x7c,
-+	0x97, 0x10, 0x70, 0x68, 0xf4, 0x98, 0xef, 0x7f
-+};
-+static const u8 enc_output077[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x4b, 0xc9, 0x8f, 0x72, 0xc4, 0x94, 0xc2, 0xa4,
-+	0x3c, 0x2b, 0x15, 0xa1, 0x04, 0x3f, 0x1c, 0xfa
-+};
-+static const u8 enc_assoc077[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce077[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0xfb, 0x66
-+};
-+static const u8 enc_key077[] __initconst = {
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30
-+};
-+
-+/* wycheproof - checking for int overflows */
-+static const u8 enc_input078[] __initconst = {
-+	0xfa, 0xb1, 0xcd, 0xdf, 0x4f, 0xe1, 0x98, 0xef,
-+	0x63, 0xad, 0xd8, 0x81, 0xd6, 0xea, 0xd6, 0xc5,
-+	0x76, 0x37, 0xbb, 0xe9, 0x20, 0x18, 0xca, 0x7c,
-+	0x0b, 0x96, 0xfb, 0xa0, 0x87, 0x1e, 0x93, 0x2d,
-+	0xb1, 0xfb, 0xf9, 0x07, 0x61, 0xbe, 0x25, 0xdf,
-+	0x8d, 0xfa, 0xf9, 0x31, 0xce, 0x57, 0x57, 0xe6,
-+	0x17, 0xb3, 0xd7, 0xa9, 0xf0, 0xbf, 0x0f, 0xfe,
-+	0x5d, 0x59, 0x1a, 0x33, 0xc1, 0x43, 0xb8, 0xf5,
-+	0x3f, 0xd0, 0xb5, 0xa1, 0x96, 0x09, 0xfd, 0x62,
-+	0xe5, 0xc2, 0x51, 0xa4, 0x28, 0x1a, 0x20, 0x0c,
-+	0xfd, 0xc3, 0x4f, 0x28, 0x17, 0x10, 0x40, 0x6f,
-+	0x4e, 0x37, 0x62, 0x54, 0x46, 0xff, 0x6e, 0xf2,
-+	0x24, 0x91, 0x3d, 0xeb, 0x0d, 0x89, 0xaf, 0x33,
-+	0x71, 0x28, 0xe3, 0xd1, 0x55, 0xd1, 0x6d, 0x3e,
-+	0xc3, 0x24, 0x60, 0x41, 0x43, 0x21, 0x43, 0xe9,
-+	0xab, 0x3a, 0x6d, 0x2c, 0xcc, 0x2f, 0x4d, 0x62
-+};
-+static const u8 enc_output078[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xf7, 0xe9, 0xe1, 0x51, 0xb0, 0x25, 0x33, 0xc7,
-+	0x46, 0x58, 0xbf, 0xc7, 0x73, 0x7c, 0x68, 0x0d
-+};
-+static const u8 enc_assoc078[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce078[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0xbb, 0x90
-+};
-+static const u8 enc_key078[] __initconst = {
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30
-+};
-+
-+/* wycheproof - checking for int overflows */
-+static const u8 enc_input079[] __initconst = {
-+	0x22, 0x72, 0x02, 0xbe, 0x7f, 0x35, 0x15, 0xe9,
-+	0xd1, 0xc0, 0x2e, 0xea, 0x2f, 0x19, 0x50, 0xb6,
-+	0x48, 0x1b, 0x04, 0x8a, 0x4c, 0x91, 0x50, 0x6c,
-+	0xb4, 0x0d, 0x50, 0x4e, 0x6c, 0x94, 0x9f, 0x82,
-+	0xd1, 0x97, 0xc2, 0x5a, 0xd1, 0x7d, 0xc7, 0x21,
-+	0x65, 0x11, 0x25, 0x78, 0x2a, 0xc7, 0xa7, 0x12,
-+	0x47, 0xfe, 0xae, 0xf3, 0x2f, 0x1f, 0x25, 0x0c,
-+	0xe4, 0xbb, 0x8f, 0x79, 0xac, 0xaa, 0x17, 0x9d,
-+	0x45, 0xa7, 0xb0, 0x54, 0x5f, 0x09, 0x24, 0x32,
-+	0x5e, 0xfa, 0x87, 0xd5, 0xe4, 0x41, 0xd2, 0x84,
-+	0x78, 0xc6, 0x1f, 0x22, 0x23, 0xee, 0x67, 0xc3,
-+	0xb4, 0x1f, 0x43, 0x94, 0x53, 0x5e, 0x2a, 0x24,
-+	0x36, 0x9a, 0x2e, 0x16, 0x61, 0x3c, 0x45, 0x94,
-+	0x90, 0xc1, 0x4f, 0xb1, 0xd7, 0x55, 0xfe, 0x53,
-+	0xfb, 0xe1, 0xee, 0x45, 0xb1, 0xb2, 0x1f, 0x71,
-+	0x62, 0xe2, 0xfc, 0xaa, 0x74, 0x2a, 0xbe, 0xfd
-+};
-+static const u8 enc_output079[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x79, 0x5b, 0xcf, 0xf6, 0x47, 0xc5, 0x53, 0xc2,
-+	0xe4, 0xeb, 0x6e, 0x0e, 0xaf, 0xd9, 0xe0, 0x4e
-+};
-+static const u8 enc_assoc079[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce079[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x48, 0x4a
-+};
-+static const u8 enc_key079[] __initconst = {
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30
-+};
-+
-+/* wycheproof - checking for int overflows */
-+static const u8 enc_input080[] __initconst = {
-+	0xfa, 0xe5, 0x83, 0x45, 0xc1, 0x6c, 0xb0, 0xf5,
-+	0xcc, 0x53, 0x7f, 0x2b, 0x1b, 0x34, 0x69, 0xc9,
-+	0x69, 0x46, 0x3b, 0x3e, 0xa7, 0x1b, 0xcf, 0x6b,
-+	0x98, 0xd6, 0x69, 0xa8, 0xe6, 0x0e, 0x04, 0xfc,
-+	0x08, 0xd5, 0xfd, 0x06, 0x9c, 0x36, 0x26, 0x38,
-+	0xe3, 0x40, 0x0e, 0xf4, 0xcb, 0x24, 0x2e, 0x27,
-+	0xe2, 0x24, 0x5e, 0x68, 0xcb, 0x9e, 0xc5, 0x83,
-+	0xda, 0x53, 0x40, 0xb1, 0x2e, 0xdf, 0x42, 0x3b,
-+	0x73, 0x26, 0xad, 0x20, 0xfe, 0xeb, 0x57, 0xda,
-+	0xca, 0x2e, 0x04, 0x67, 0xa3, 0x28, 0x99, 0xb4,
-+	0x2d, 0xf8, 0xe5, 0x6d, 0x84, 0xe0, 0x06, 0xbc,
-+	0x8a, 0x7a, 0xcc, 0x73, 0x1e, 0x7c, 0x1f, 0x6b,
-+	0xec, 0xb5, 0x71, 0x9f, 0x70, 0x77, 0xf0, 0xd4,
-+	0xf4, 0xc6, 0x1a, 0xb1, 0x1e, 0xba, 0xc1, 0x00,
-+	0x18, 0x01, 0xce, 0x33, 0xc4, 0xe4, 0xa7, 0x7d,
-+	0x83, 0x1d, 0x3c, 0xe3, 0x4e, 0x84, 0x10, 0xe1
-+};
-+static const u8 enc_output080[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x19, 0x46, 0xd6, 0x53, 0x96, 0x0f, 0x94, 0x7a,
-+	0x74, 0xd3, 0xe8, 0x09, 0x3c, 0xf4, 0x85, 0x02
-+};
-+static const u8 enc_assoc080[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce080[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x93, 0x2f, 0x40
-+};
-+static const u8 enc_key080[] __initconst = {
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30
-+};
-+
-+/* wycheproof - checking for int overflows */
-+static const u8 enc_input081[] __initconst = {
-+	0xeb, 0xb2, 0x16, 0xdd, 0xd7, 0xca, 0x70, 0x92,
-+	0x15, 0xf5, 0x03, 0xdf, 0x9c, 0xe6, 0x3c, 0x5c,
-+	0xd2, 0x19, 0x4e, 0x7d, 0x90, 0x99, 0xe8, 0xa9,
-+	0x0b, 0x2a, 0xfa, 0xad, 0x5e, 0xba, 0x35, 0x06,
-+	0x99, 0x25, 0xa6, 0x03, 0xfd, 0xbc, 0x34, 0x1a,
-+	0xae, 0xd4, 0x15, 0x05, 0xb1, 0x09, 0x41, 0xfa,
-+	0x38, 0x56, 0xa7, 0xe2, 0x47, 0xb1, 0x04, 0x07,
-+	0x09, 0x74, 0x6c, 0xfc, 0x20, 0x96, 0xca, 0xa6,
-+	0x31, 0xb2, 0xff, 0xf4, 0x1c, 0x25, 0x05, 0x06,
-+	0xd8, 0x89, 0xc1, 0xc9, 0x06, 0x71, 0xad, 0xe8,
-+	0x53, 0xee, 0x63, 0x94, 0xc1, 0x91, 0x92, 0xa5,
-+	0xcf, 0x37, 0x10, 0xd1, 0x07, 0x30, 0x99, 0xe5,
-+	0xbc, 0x94, 0x65, 0x82, 0xfc, 0x0f, 0xab, 0x9f,
-+	0x54, 0x3c, 0x71, 0x6a, 0xe2, 0x48, 0x6a, 0x86,
-+	0x83, 0xfd, 0xca, 0x39, 0xd2, 0xe1, 0x4f, 0x23,
-+	0xd0, 0x0a, 0x58, 0x26, 0x64, 0xf4, 0xec, 0xb1
-+};
-+static const u8 enc_output081[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x36, 0xc3, 0x00, 0x29, 0x85, 0xdd, 0x21, 0xba,
-+	0xf8, 0x95, 0xd6, 0x33, 0x57, 0x3f, 0x12, 0xc0
-+};
-+static const u8 enc_assoc081[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce081[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0xe2, 0x93, 0x35
-+};
-+static const u8 enc_key081[] __initconst = {
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30
-+};
-+
-+/* wycheproof - checking for int overflows */
-+static const u8 enc_input082[] __initconst = {
-+	0x40, 0x8a, 0xe6, 0xef, 0x1c, 0x7e, 0xf0, 0xfb,
-+	0x2c, 0x2d, 0x61, 0x08, 0x16, 0xfc, 0x78, 0x49,
-+	0xef, 0xa5, 0x8f, 0x78, 0x27, 0x3f, 0x5f, 0x16,
-+	0x6e, 0xa6, 0x5f, 0x81, 0xb5, 0x75, 0x74, 0x7d,
-+	0x03, 0x5b, 0x30, 0x40, 0xfe, 0xde, 0x1e, 0xb9,
-+	0x45, 0x97, 0x88, 0x66, 0x97, 0x88, 0x40, 0x8e,
-+	0x00, 0x41, 0x3b, 0x3e, 0x37, 0x6d, 0x15, 0x2d,
-+	0x20, 0x4a, 0xa2, 0xb7, 0xa8, 0x35, 0x58, 0xfc,
-+	0xd4, 0x8a, 0x0e, 0xf7, 0xa2, 0x6b, 0x1c, 0xd6,
-+	0xd3, 0x5d, 0x23, 0xb3, 0xf5, 0xdf, 0xe0, 0xca,
-+	0x77, 0xa4, 0xce, 0x32, 0xb9, 0x4a, 0xbf, 0x83,
-+	0xda, 0x2a, 0xef, 0xca, 0xf0, 0x68, 0x38, 0x08,
-+	0x79, 0xe8, 0x9f, 0xb0, 0xa3, 0x82, 0x95, 0x95,
-+	0xcf, 0x44, 0xc3, 0x85, 0x2a, 0xe2, 0xcc, 0x66,
-+	0x2b, 0x68, 0x9f, 0x93, 0x55, 0xd9, 0xc1, 0x83,
-+	0x80, 0x1f, 0x6a, 0xcc, 0x31, 0x3f, 0x89, 0x07
-+};
-+static const u8 enc_output082[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x65, 0x14, 0x51, 0x8e, 0x0a, 0x26, 0x41, 0x42,
-+	0xe0, 0xb7, 0x35, 0x1f, 0x96, 0x7f, 0xc2, 0xae
-+};
-+static const u8 enc_assoc082[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce082[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0xf7, 0xd5
-+};
-+static const u8 enc_key082[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - checking for int overflows */
-+static const u8 enc_input083[] __initconst = {
-+	0x0a, 0x0a, 0x24, 0x49, 0x9b, 0xca, 0xde, 0x58,
-+	0xcf, 0x15, 0x76, 0xc3, 0x12, 0xac, 0xa9, 0x84,
-+	0x71, 0x8c, 0xb4, 0xcc, 0x7e, 0x01, 0x53, 0xf5,
-+	0xa9, 0x01, 0x58, 0x10, 0x85, 0x96, 0x44, 0xdf,
-+	0xc0, 0x21, 0x17, 0x4e, 0x0b, 0x06, 0x0a, 0x39,
-+	0x74, 0x48, 0xde, 0x8b, 0x48, 0x4a, 0x86, 0x03,
-+	0xbe, 0x68, 0x0a, 0x69, 0x34, 0xc0, 0x90, 0x6f,
-+	0x30, 0xdd, 0x17, 0xea, 0xe2, 0xd4, 0xc5, 0xfa,
-+	0xa7, 0x77, 0xf8, 0xca, 0x53, 0x37, 0x0e, 0x08,
-+	0x33, 0x1b, 0x88, 0xc3, 0x42, 0xba, 0xc9, 0x59,
-+	0x78, 0x7b, 0xbb, 0x33, 0x93, 0x0e, 0x3b, 0x56,
-+	0xbe, 0x86, 0xda, 0x7f, 0x2a, 0x6e, 0xb1, 0xf9,
-+	0x40, 0x89, 0xd1, 0xd1, 0x81, 0x07, 0x4d, 0x43,
-+	0x02, 0xf8, 0xe0, 0x55, 0x2d, 0x0d, 0xe1, 0xfa,
-+	0xb3, 0x06, 0xa2, 0x1b, 0x42, 0xd4, 0xc3, 0xba,
-+	0x6e, 0x6f, 0x0c, 0xbc, 0xc8, 0x1e, 0x87, 0x7a
-+};
-+static const u8 enc_output083[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x4c, 0x19, 0x4d, 0xa6, 0xa9, 0x9f, 0xd6, 0x5b,
-+	0x40, 0xe9, 0xca, 0xd7, 0x98, 0xf4, 0x4b, 0x19
-+};
-+static const u8 enc_assoc083[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce083[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x3d, 0xfc, 0xe4
-+};
-+static const u8 enc_key083[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - checking for int overflows */
-+static const u8 enc_input084[] __initconst = {
-+	0x4a, 0x0a, 0xaf, 0xf8, 0x49, 0x47, 0x29, 0x18,
-+	0x86, 0x91, 0x70, 0x13, 0x40, 0xf3, 0xce, 0x2b,
-+	0x8a, 0x78, 0xee, 0xd3, 0xa0, 0xf0, 0x65, 0x99,
-+	0x4b, 0x72, 0x48, 0x4e, 0x79, 0x91, 0xd2, 0x5c,
-+	0x29, 0xaa, 0x07, 0x5e, 0xb1, 0xfc, 0x16, 0xde,
-+	0x93, 0xfe, 0x06, 0x90, 0x58, 0x11, 0x2a, 0xb2,
-+	0x84, 0xa3, 0xed, 0x18, 0x78, 0x03, 0x26, 0xd1,
-+	0x25, 0x8a, 0x47, 0x22, 0x2f, 0xa6, 0x33, 0xd8,
-+	0xb2, 0x9f, 0x3b, 0xd9, 0x15, 0x0b, 0x23, 0x9b,
-+	0x15, 0x46, 0xc2, 0xbb, 0x9b, 0x9f, 0x41, 0x0f,
-+	0xeb, 0xea, 0xd3, 0x96, 0x00, 0x0e, 0xe4, 0x77,
-+	0x70, 0x15, 0x32, 0xc3, 0xd0, 0xf5, 0xfb, 0xf8,
-+	0x95, 0xd2, 0x80, 0x19, 0x6d, 0x2f, 0x73, 0x7c,
-+	0x5e, 0x9f, 0xec, 0x50, 0xd9, 0x2b, 0xb0, 0xdf,
-+	0x5d, 0x7e, 0x51, 0x3b, 0xe5, 0xb8, 0xea, 0x97,
-+	0x13, 0x10, 0xd5, 0xbf, 0x16, 0xba, 0x7a, 0xee
-+};
-+static const u8 enc_output084[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xc8, 0xae, 0x77, 0x88, 0xcd, 0x28, 0x74, 0xab,
-+	0xc1, 0x38, 0x54, 0x1e, 0x11, 0xfd, 0x05, 0x87
-+};
-+static const u8 enc_assoc084[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce084[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x01, 0x84, 0x86, 0xa8
-+};
-+static const u8 enc_key084[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - checking for int overflows */
-+static const u8 enc_input085[] __initconst = {
-+	0xff, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0x78, 0x3d, 0x35, 0xf6, 0x13, 0xe6, 0xd9, 0x09,
-+	0x3d, 0x38, 0xe9, 0x75, 0xc3, 0x8f, 0xe3, 0xb8,
-+	0x9f, 0x7a, 0xed, 0x35, 0xcb, 0x5a, 0x2f, 0xca,
-+	0xa0, 0x34, 0x6e, 0xfb, 0x93, 0x65, 0x54, 0x64,
-+	0x9c, 0xf6, 0x37, 0x81, 0x71, 0xea, 0xe4, 0x39,
-+	0x6e, 0xa1, 0x5d, 0xc2, 0x40, 0xd1, 0xab, 0xf4,
-+	0x47, 0x2d, 0x90, 0x96, 0x52, 0x4f, 0xa1, 0xb2,
-+	0xb0, 0x23, 0xb8, 0xb2, 0x88, 0x22, 0x27, 0x73,
-+	0xd4, 0xd2, 0x06, 0x61, 0x6f, 0x92, 0x93, 0xf6,
-+	0x5b, 0x45, 0xdb, 0xbc, 0x74, 0xe7, 0xc2, 0xed,
-+	0xfb, 0xcb, 0xbf, 0x1c, 0xfb, 0x67, 0x9b, 0xb7,
-+	0x39, 0xa5, 0x86, 0x2d, 0xe2, 0xbc, 0xb9, 0x37,
-+	0xf7, 0x4d, 0x5b, 0xf8, 0x67, 0x1c, 0x5a, 0x8a,
-+	0x50, 0x92, 0xf6, 0x1d, 0x54, 0xc9, 0xaa, 0x5b
-+};
-+static const u8 enc_output085[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x93, 0x3a, 0x51, 0x63, 0xc7, 0xf6, 0x23, 0x68,
-+	0x32, 0x7b, 0x3f, 0xbc, 0x10, 0x36, 0xc9, 0x43
-+};
-+static const u8 enc_assoc085[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce085[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key085[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input093[] __initconst = {
-+	0x00, 0x52, 0x35, 0xd2, 0xa9, 0x19, 0xf2, 0x8d,
-+	0x3d, 0xb7, 0x66, 0x4a, 0x34, 0xae, 0x6b, 0x44,
-+	0x4d, 0x3d, 0x35, 0xf6, 0x13, 0xe6, 0xd9, 0x09,
-+	0x3d, 0x38, 0xe9, 0x75, 0xc3, 0x8f, 0xe3, 0xb8,
-+	0x5b, 0x8b, 0x94, 0x50, 0x9e, 0x2b, 0x74, 0xa3,
-+	0x6d, 0x34, 0x6e, 0x33, 0xd5, 0x72, 0x65, 0x9b,
-+	0xa9, 0xf6, 0x37, 0x81, 0x71, 0xea, 0xe4, 0x39,
-+	0x6e, 0xa1, 0x5d, 0xc2, 0x40, 0xd1, 0xab, 0xf4,
-+	0x83, 0xdc, 0xe9, 0xf3, 0x07, 0x3e, 0xfa, 0xdb,
-+	0x7d, 0x23, 0xb8, 0x7a, 0xce, 0x35, 0x16, 0x8c
-+};
-+static const u8 enc_output093[] __initconst = {
-+	0x00, 0x39, 0xe2, 0xfd, 0x2f, 0xd3, 0x12, 0x14,
-+	0x9e, 0x98, 0x98, 0x80, 0x88, 0x48, 0x13, 0xe7,
-+	0xca, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x3b, 0x0e, 0x86, 0x9a, 0xaa, 0x8e, 0xa4, 0x96,
-+	0x32, 0xff, 0xff, 0x37, 0xb9, 0xe8, 0xce, 0x00,
-+	0xca, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x3b, 0x0e, 0x86, 0x9a, 0xaa, 0x8e, 0xa4, 0x96,
-+	0x32, 0xff, 0xff, 0x37, 0xb9, 0xe8, 0xce, 0x00,
-+	0xa5, 0x19, 0xac, 0x1a, 0x35, 0xb4, 0xa5, 0x77,
-+	0x87, 0x51, 0x0a, 0xf7, 0x8d, 0x8d, 0x20, 0x0a
-+};
-+static const u8 enc_assoc093[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce093[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key093[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input094[] __initconst = {
-+	0xd3, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0xe5, 0xda, 0x78, 0x76, 0x6f, 0xa1, 0x92, 0x90,
-+	0xc0, 0x31, 0xf7, 0x52, 0x08, 0x50, 0x67, 0x45,
-+	0xae, 0x7a, 0xed, 0x35, 0xcb, 0x5a, 0x2f, 0xca,
-+	0xa0, 0x34, 0x6e, 0xfb, 0x93, 0x65, 0x54, 0x64,
-+	0x49, 0x6d, 0xde, 0xb0, 0x55, 0x09, 0xc6, 0xef,
-+	0xff, 0xab, 0x75, 0xeb, 0x2d, 0xf4, 0xab, 0x09,
-+	0x76, 0x2d, 0x90, 0x96, 0x52, 0x4f, 0xa1, 0xb2,
-+	0xb0, 0x23, 0xb8, 0xb2, 0x88, 0x22, 0x27, 0x73,
-+	0x01, 0x49, 0xef, 0x50, 0x4b, 0x71, 0xb1, 0x20,
-+	0xca, 0x4f, 0xf3, 0x95, 0x19, 0xc2, 0xc2, 0x10
-+};
-+static const u8 enc_output094[] __initconst = {
-+	0xd3, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x62, 0x18, 0xb2, 0x7f, 0x83, 0xb8, 0xb4, 0x66,
-+	0x02, 0xf6, 0xe1, 0xd8, 0x34, 0x20, 0x7b, 0x02,
-+	0xce, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x2a, 0x64, 0x16, 0xce, 0xdb, 0x1c, 0xdd, 0x29,
-+	0x6e, 0xf5, 0xd7, 0xd6, 0x92, 0xda, 0xff, 0x02,
-+	0xce, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x2a, 0x64, 0x16, 0xce, 0xdb, 0x1c, 0xdd, 0x29,
-+	0x6e, 0xf5, 0xd7, 0xd6, 0x92, 0xda, 0xff, 0x02,
-+	0x30, 0x2f, 0xe8, 0x2a, 0xb0, 0xa0, 0x9a, 0xf6,
-+	0x44, 0x00, 0xd0, 0x15, 0xae, 0x83, 0xd9, 0xcc
-+};
-+static const u8 enc_assoc094[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce094[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key094[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input095[] __initconst = {
-+	0xe9, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0x6d, 0xf1, 0x39, 0x4e, 0xdc, 0x53, 0x9b, 0x5b,
-+	0x3a, 0x09, 0x57, 0xbe, 0x0f, 0xb8, 0x59, 0x46,
-+	0x80, 0x7a, 0xed, 0x35, 0xcb, 0x5a, 0x2f, 0xca,
-+	0xa0, 0x34, 0x6e, 0xfb, 0x93, 0x65, 0x54, 0x64,
-+	0xd1, 0x76, 0x9f, 0xe8, 0x06, 0xbb, 0xfe, 0xb6,
-+	0xf5, 0x90, 0x95, 0x0f, 0x2e, 0xac, 0x9e, 0x0a,
-+	0x58, 0x2d, 0x90, 0x96, 0x52, 0x4f, 0xa1, 0xb2,
-+	0xb0, 0x23, 0xb8, 0xb2, 0x88, 0x22, 0x27, 0x73,
-+	0x99, 0x52, 0xae, 0x08, 0x18, 0xc3, 0x89, 0x79,
-+	0xc0, 0x74, 0x13, 0x71, 0x1a, 0x9a, 0xf7, 0x13
-+};
-+static const u8 enc_output095[] __initconst = {
-+	0xe9, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xea, 0x33, 0xf3, 0x47, 0x30, 0x4a, 0xbd, 0xad,
-+	0xf8, 0xce, 0x41, 0x34, 0x33, 0xc8, 0x45, 0x01,
-+	0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xb2, 0x7f, 0x57, 0x96, 0x88, 0xae, 0xe5, 0x70,
-+	0x64, 0xce, 0x37, 0x32, 0x91, 0x82, 0xca, 0x01,
-+	0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xb2, 0x7f, 0x57, 0x96, 0x88, 0xae, 0xe5, 0x70,
-+	0x64, 0xce, 0x37, 0x32, 0x91, 0x82, 0xca, 0x01,
-+	0x98, 0xa7, 0xe8, 0x36, 0xe0, 0xee, 0x4d, 0x02,
-+	0x35, 0x00, 0xd0, 0x55, 0x7e, 0xc2, 0xcb, 0xe0
-+};
-+static const u8 enc_assoc095[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce095[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key095[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input096[] __initconst = {
-+	0xff, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0x64, 0xf9, 0x0f, 0x5b, 0x26, 0x92, 0xb8, 0x60,
-+	0xd4, 0x59, 0x6f, 0xf4, 0xb3, 0x40, 0x2c, 0x5c,
-+	0x00, 0xb9, 0xbb, 0x53, 0x70, 0x7a, 0xa6, 0x67,
-+	0xd3, 0x56, 0xfe, 0x50, 0xc7, 0x19, 0x96, 0x94,
-+	0x03, 0x35, 0x61, 0xe7, 0xca, 0xca, 0x6d, 0x94,
-+	0x1d, 0xc3, 0xcd, 0x69, 0x14, 0xad, 0x69, 0x04
-+};
-+static const u8 enc_output096[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xe3, 0x3b, 0xc5, 0x52, 0xca, 0x8b, 0x9e, 0x96,
-+	0x16, 0x9e, 0x79, 0x7e, 0x8f, 0x30, 0x30, 0x1b,
-+	0x60, 0x3c, 0xa9, 0x99, 0x44, 0xdf, 0x76, 0x52,
-+	0x8c, 0x9d, 0x6f, 0x54, 0xab, 0x83, 0x3d, 0x0f,
-+	0x60, 0x3c, 0xa9, 0x99, 0x44, 0xdf, 0x76, 0x52,
-+	0x8c, 0x9d, 0x6f, 0x54, 0xab, 0x83, 0x3d, 0x0f,
-+	0x6a, 0xb8, 0xdc, 0xe2, 0xc5, 0x9d, 0xa4, 0x73,
-+	0x71, 0x30, 0xb0, 0x25, 0x2f, 0x68, 0xa8, 0xd8
-+};
-+static const u8 enc_assoc096[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce096[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key096[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input097[] __initconst = {
-+	0x68, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0xb0, 0x8f, 0x25, 0x67, 0x5b, 0x9b, 0xcb, 0xf6,
-+	0xe3, 0x84, 0x07, 0xde, 0x2e, 0xc7, 0x5a, 0x47,
-+	0x9f, 0x7a, 0xed, 0x35, 0xcb, 0x5a, 0x2f, 0xca,
-+	0xa0, 0x34, 0x6e, 0xfb, 0x93, 0x65, 0x54, 0x64,
-+	0x2d, 0x2a, 0xf7, 0xcd, 0x6b, 0x08, 0x05, 0x01,
-+	0xd3, 0x1b, 0xa5, 0x4f, 0xb2, 0xeb, 0x75, 0x96,
-+	0x47, 0x2d, 0x90, 0x96, 0x52, 0x4f, 0xa1, 0xb2,
-+	0xb0, 0x23, 0xb8, 0xb2, 0x88, 0x22, 0x27, 0x73,
-+	0x65, 0x0e, 0xc6, 0x2d, 0x75, 0x70, 0x72, 0xce,
-+	0xe6, 0xff, 0x23, 0x31, 0x86, 0xdd, 0x1c, 0x8f
-+};
-+static const u8 enc_output097[] __initconst = {
-+	0x68, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x37, 0x4d, 0xef, 0x6e, 0xb7, 0x82, 0xed, 0x00,
-+	0x21, 0x43, 0x11, 0x54, 0x12, 0xb7, 0x46, 0x00,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x4e, 0x23, 0x3f, 0xb3, 0xe5, 0x1d, 0x1e, 0xc7,
-+	0x42, 0x45, 0x07, 0x72, 0x0d, 0xc5, 0x21, 0x9d,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x4e, 0x23, 0x3f, 0xb3, 0xe5, 0x1d, 0x1e, 0xc7,
-+	0x42, 0x45, 0x07, 0x72, 0x0d, 0xc5, 0x21, 0x9d,
-+	0x04, 0x4d, 0xea, 0x60, 0x88, 0x80, 0x41, 0x2b,
-+	0xfd, 0xff, 0xcf, 0x35, 0x57, 0x9e, 0x9b, 0x26
-+};
-+static const u8 enc_assoc097[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce097[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key097[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input098[] __initconst = {
-+	0x6d, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0xa1, 0x61, 0xb5, 0xab, 0x04, 0x09, 0x00, 0x62,
-+	0x9e, 0xfe, 0xff, 0x78, 0xd7, 0xd8, 0x6b, 0x45,
-+	0x9f, 0x7a, 0xed, 0x35, 0xcb, 0x5a, 0x2f, 0xca,
-+	0xa0, 0x34, 0x6e, 0xfb, 0x93, 0x65, 0x54, 0x64,
-+	0xc6, 0xf8, 0x07, 0x8c, 0xc8, 0xef, 0x12, 0xa0,
-+	0xff, 0x65, 0x7d, 0x6d, 0x08, 0xdb, 0x10, 0xb8,
-+	0x47, 0x2d, 0x90, 0x96, 0x52, 0x4f, 0xa1, 0xb2,
-+	0xb0, 0x23, 0xb8, 0xb2, 0x88, 0x22, 0x27, 0x73,
-+	0x8e, 0xdc, 0x36, 0x6c, 0xd6, 0x97, 0x65, 0x6f,
-+	0xca, 0x81, 0xfb, 0x13, 0x3c, 0xed, 0x79, 0xa1
-+};
-+static const u8 enc_output098[] __initconst = {
-+	0x6d, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x26, 0xa3, 0x7f, 0xa2, 0xe8, 0x10, 0x26, 0x94,
-+	0x5c, 0x39, 0xe9, 0xf2, 0xeb, 0xa8, 0x77, 0x02,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xa5, 0xf1, 0xcf, 0xf2, 0x46, 0xfa, 0x09, 0x66,
-+	0x6e, 0x3b, 0xdf, 0x50, 0xb7, 0xf5, 0x44, 0xb3,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xa5, 0xf1, 0xcf, 0xf2, 0x46, 0xfa, 0x09, 0x66,
-+	0x6e, 0x3b, 0xdf, 0x50, 0xb7, 0xf5, 0x44, 0xb3,
-+	0x1e, 0x6b, 0xea, 0x63, 0x14, 0x54, 0x2e, 0x2e,
-+	0xf9, 0xff, 0xcf, 0x45, 0x0b, 0x2e, 0x98, 0x2b
-+};
-+static const u8 enc_assoc098[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce098[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key098[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input099[] __initconst = {
-+	0xff, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0xfc, 0x01, 0xb8, 0x91, 0xe5, 0xf0, 0xf9, 0x12,
-+	0x8d, 0x7d, 0x1c, 0x57, 0x91, 0x92, 0xb6, 0x98,
-+	0x63, 0x41, 0x44, 0x15, 0xb6, 0x99, 0x68, 0x95,
-+	0x9a, 0x72, 0x91, 0xb7, 0xa5, 0xaf, 0x13, 0x48,
-+	0x60, 0xcd, 0x9e, 0xa1, 0x0c, 0x29, 0xa3, 0x66,
-+	0x54, 0xe7, 0xa2, 0x8e, 0x76, 0x1b, 0xec, 0xd8
-+};
-+static const u8 enc_output099[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x7b, 0xc3, 0x72, 0x98, 0x09, 0xe9, 0xdf, 0xe4,
-+	0x4f, 0xba, 0x0a, 0xdd, 0xad, 0xe2, 0xaa, 0xdf,
-+	0x03, 0xc4, 0x56, 0xdf, 0x82, 0x3c, 0xb8, 0xa0,
-+	0xc5, 0xb9, 0x00, 0xb3, 0xc9, 0x35, 0xb8, 0xd3,
-+	0x03, 0xc4, 0x56, 0xdf, 0x82, 0x3c, 0xb8, 0xa0,
-+	0xc5, 0xb9, 0x00, 0xb3, 0xc9, 0x35, 0xb8, 0xd3,
-+	0xed, 0x20, 0x17, 0xc8, 0xdb, 0xa4, 0x77, 0x56,
-+	0x29, 0x04, 0x9d, 0x78, 0x6e, 0x3b, 0xce, 0xb1
-+};
-+static const u8 enc_assoc099[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce099[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key099[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input100[] __initconst = {
-+	0xff, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0x6b, 0x6d, 0xc9, 0xd2, 0x1a, 0x81, 0x9e, 0x70,
-+	0xb5, 0x77, 0xf4, 0x41, 0x37, 0xd3, 0xd6, 0xbd,
-+	0x13, 0x35, 0xf5, 0xeb, 0x44, 0x49, 0x40, 0x77,
-+	0xb2, 0x64, 0x49, 0xa5, 0x4b, 0x6c, 0x7c, 0x75,
-+	0x10, 0xb9, 0x2f, 0x5f, 0xfe, 0xf9, 0x8b, 0x84,
-+	0x7c, 0xf1, 0x7a, 0x9c, 0x98, 0xd8, 0x83, 0xe5
-+};
-+static const u8 enc_output100[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xec, 0xaf, 0x03, 0xdb, 0xf6, 0x98, 0xb8, 0x86,
-+	0x77, 0xb0, 0xe2, 0xcb, 0x0b, 0xa3, 0xca, 0xfa,
-+	0x73, 0xb0, 0xe7, 0x21, 0x70, 0xec, 0x90, 0x42,
-+	0xed, 0xaf, 0xd8, 0xa1, 0x27, 0xf6, 0xd7, 0xee,
-+	0x73, 0xb0, 0xe7, 0x21, 0x70, 0xec, 0x90, 0x42,
-+	0xed, 0xaf, 0xd8, 0xa1, 0x27, 0xf6, 0xd7, 0xee,
-+	0x07, 0x3f, 0x17, 0xcb, 0x67, 0x78, 0x64, 0x59,
-+	0x25, 0x04, 0x9d, 0x88, 0x22, 0xcb, 0xca, 0xb6
-+};
-+static const u8 enc_assoc100[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce100[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key100[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input101[] __initconst = {
-+	0xff, 0xcb, 0x2b, 0x11, 0x06, 0xf8, 0x23, 0x4c,
-+	0x5e, 0x99, 0xd4, 0xdb, 0x4c, 0x70, 0x48, 0xde,
-+	0x32, 0x3d, 0x35, 0xf6, 0x13, 0xe6, 0xd9, 0x09,
-+	0x3d, 0x38, 0xe9, 0x75, 0xc3, 0x8f, 0xe3, 0xb8,
-+	0x16, 0xe9, 0x88, 0x4a, 0x11, 0x4f, 0x0e, 0x92,
-+	0x66, 0xce, 0xa3, 0x88, 0x5f, 0xe3, 0x6b, 0x9f,
-+	0xd6, 0xf6, 0x37, 0x81, 0x71, 0xea, 0xe4, 0x39,
-+	0x6e, 0xa1, 0x5d, 0xc2, 0x40, 0xd1, 0xab, 0xf4,
-+	0xce, 0xbe, 0xf5, 0xe9, 0x88, 0x5a, 0x80, 0xea,
-+	0x76, 0xd9, 0x75, 0xc1, 0x44, 0xa4, 0x18, 0x88
-+};
-+static const u8 enc_output101[] __initconst = {
-+	0xff, 0xa0, 0xfc, 0x3e, 0x80, 0x32, 0xc3, 0xd5,
-+	0xfd, 0xb6, 0x2a, 0x11, 0xf0, 0x96, 0x30, 0x7d,
-+	0xb5, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x76, 0x6c, 0x9a, 0x80, 0x25, 0xea, 0xde, 0xa7,
-+	0x39, 0x05, 0x32, 0x8c, 0x33, 0x79, 0xc0, 0x04,
-+	0xb5, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x76, 0x6c, 0x9a, 0x80, 0x25, 0xea, 0xde, 0xa7,
-+	0x39, 0x05, 0x32, 0x8c, 0x33, 0x79, 0xc0, 0x04,
-+	0x8b, 0x9b, 0xb4, 0xb4, 0x86, 0x12, 0x89, 0x65,
-+	0x8c, 0x69, 0x6a, 0x83, 0x40, 0x15, 0x04, 0x05
-+};
-+static const u8 enc_assoc101[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce101[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key101[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input102[] __initconst = {
-+	0x6f, 0x9e, 0x70, 0xed, 0x3b, 0x8b, 0xac, 0xa0,
-+	0x26, 0xe4, 0x6a, 0x5a, 0x09, 0x43, 0x15, 0x8d,
-+	0x21, 0x3d, 0x35, 0xf6, 0x13, 0xe6, 0xd9, 0x09,
-+	0x3d, 0x38, 0xe9, 0x75, 0xc3, 0x8f, 0xe3, 0xb8,
-+	0x0c, 0x61, 0x2c, 0x5e, 0x8d, 0x89, 0xa8, 0x73,
-+	0xdb, 0xca, 0xad, 0x5b, 0x73, 0x46, 0x42, 0x9b,
-+	0xc5, 0xf6, 0x37, 0x81, 0x71, 0xea, 0xe4, 0x39,
-+	0x6e, 0xa1, 0x5d, 0xc2, 0x40, 0xd1, 0xab, 0xf4,
-+	0xd4, 0x36, 0x51, 0xfd, 0x14, 0x9c, 0x26, 0x0b,
-+	0xcb, 0xdd, 0x7b, 0x12, 0x68, 0x01, 0x31, 0x8c
-+};
-+static const u8 enc_output102[] __initconst = {
-+	0x6f, 0xf5, 0xa7, 0xc2, 0xbd, 0x41, 0x4c, 0x39,
-+	0x85, 0xcb, 0x94, 0x90, 0xb5, 0xa5, 0x6d, 0x2e,
-+	0xa6, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x6c, 0xe4, 0x3e, 0x94, 0xb9, 0x2c, 0x78, 0x46,
-+	0x84, 0x01, 0x3c, 0x5f, 0x1f, 0xdc, 0xe9, 0x00,
-+	0xa6, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x6c, 0xe4, 0x3e, 0x94, 0xb9, 0x2c, 0x78, 0x46,
-+	0x84, 0x01, 0x3c, 0x5f, 0x1f, 0xdc, 0xe9, 0x00,
-+	0x8b, 0x3b, 0xbd, 0x51, 0x64, 0x44, 0x59, 0x56,
-+	0x8d, 0x81, 0xca, 0x1f, 0xa7, 0x2c, 0xe4, 0x04
-+};
-+static const u8 enc_assoc102[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce102[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key102[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input103[] __initconst = {
-+	0x41, 0x2b, 0x08, 0x0a, 0x3e, 0x19, 0xc1, 0x0d,
-+	0x44, 0xa1, 0xaf, 0x1e, 0xab, 0xde, 0xb4, 0xce,
-+	0x35, 0x3d, 0x35, 0xf6, 0x13, 0xe6, 0xd9, 0x09,
-+	0x3d, 0x38, 0xe9, 0x75, 0xc3, 0x8f, 0xe3, 0xb8,
-+	0x6b, 0x83, 0x94, 0x33, 0x09, 0x21, 0x48, 0x6c,
-+	0xa1, 0x1d, 0x29, 0x1c, 0x3e, 0x97, 0xee, 0x9a,
-+	0xd1, 0xf6, 0x37, 0x81, 0x71, 0xea, 0xe4, 0x39,
-+	0x6e, 0xa1, 0x5d, 0xc2, 0x40, 0xd1, 0xab, 0xf4,
-+	0xb3, 0xd4, 0xe9, 0x90, 0x90, 0x34, 0xc6, 0x14,
-+	0xb1, 0x0a, 0xff, 0x55, 0x25, 0xd0, 0x9d, 0x8d
-+};
-+static const u8 enc_output103[] __initconst = {
-+	0x41, 0x40, 0xdf, 0x25, 0xb8, 0xd3, 0x21, 0x94,
-+	0xe7, 0x8e, 0x51, 0xd4, 0x17, 0x38, 0xcc, 0x6d,
-+	0xb2, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x0b, 0x06, 0x86, 0xf9, 0x3d, 0x84, 0x98, 0x59,
-+	0xfe, 0xd6, 0xb8, 0x18, 0x52, 0x0d, 0x45, 0x01,
-+	0xb2, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x0b, 0x06, 0x86, 0xf9, 0x3d, 0x84, 0x98, 0x59,
-+	0xfe, 0xd6, 0xb8, 0x18, 0x52, 0x0d, 0x45, 0x01,
-+	0x86, 0xfb, 0xab, 0x2b, 0x4a, 0x94, 0xf4, 0x7a,
-+	0xa5, 0x6f, 0x0a, 0xea, 0x65, 0xd1, 0x10, 0x08
-+};
-+static const u8 enc_assoc103[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce103[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key103[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input104[] __initconst = {
-+	0xb2, 0x47, 0xa7, 0x47, 0x23, 0x49, 0x1a, 0xac,
-+	0xac, 0xaa, 0xd7, 0x09, 0xc9, 0x1e, 0x93, 0x2b,
-+	0x31, 0x3d, 0x35, 0xf6, 0x13, 0xe6, 0xd9, 0x09,
-+	0x3d, 0x38, 0xe9, 0x75, 0xc3, 0x8f, 0xe3, 0xb8,
-+	0x9a, 0xde, 0x04, 0xe7, 0x5b, 0xb7, 0x01, 0xd9,
-+	0x66, 0x06, 0x01, 0xb3, 0x47, 0x65, 0xde, 0x98,
-+	0xd5, 0xf6, 0x37, 0x81, 0x71, 0xea, 0xe4, 0x39,
-+	0x6e, 0xa1, 0x5d, 0xc2, 0x40, 0xd1, 0xab, 0xf4,
-+	0x42, 0x89, 0x79, 0x44, 0xc2, 0xa2, 0x8f, 0xa1,
-+	0x76, 0x11, 0xd7, 0xfa, 0x5c, 0x22, 0xad, 0x8f
-+};
-+static const u8 enc_output104[] __initconst = {
-+	0xb2, 0x2c, 0x70, 0x68, 0xa5, 0x83, 0xfa, 0x35,
-+	0x0f, 0x85, 0x29, 0xc3, 0x75, 0xf8, 0xeb, 0x88,
-+	0xb6, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xfa, 0x5b, 0x16, 0x2d, 0x6f, 0x12, 0xd1, 0xec,
-+	0x39, 0xcd, 0x90, 0xb7, 0x2b, 0xff, 0x75, 0x03,
-+	0xb6, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xfa, 0x5b, 0x16, 0x2d, 0x6f, 0x12, 0xd1, 0xec,
-+	0x39, 0xcd, 0x90, 0xb7, 0x2b, 0xff, 0x75, 0x03,
-+	0xa0, 0x19, 0xac, 0x2e, 0xd6, 0x67, 0xe1, 0x7d,
-+	0xa1, 0x6f, 0x0a, 0xfa, 0x19, 0x61, 0x0d, 0x0d
-+};
-+static const u8 enc_assoc104[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce104[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key104[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input105[] __initconst = {
-+	0x74, 0x0f, 0x9e, 0x49, 0xf6, 0x10, 0xef, 0xa5,
-+	0x85, 0xb6, 0x59, 0xca, 0x6e, 0xd8, 0xb4, 0x99,
-+	0x2d, 0x3d, 0x35, 0xf6, 0x13, 0xe6, 0xd9, 0x09,
-+	0x3d, 0x38, 0xe9, 0x75, 0xc3, 0x8f, 0xe3, 0xb8,
-+	0x41, 0x2d, 0x96, 0xaf, 0xbe, 0x80, 0xec, 0x3e,
-+	0x79, 0xd4, 0x51, 0xb0, 0x0a, 0x2d, 0xb2, 0x9a,
-+	0xc9, 0xf6, 0x37, 0x81, 0x71, 0xea, 0xe4, 0x39,
-+	0x6e, 0xa1, 0x5d, 0xc2, 0x40, 0xd1, 0xab, 0xf4,
-+	0x99, 0x7a, 0xeb, 0x0c, 0x27, 0x95, 0x62, 0x46,
-+	0x69, 0xc3, 0x87, 0xf9, 0x11, 0x6a, 0xc1, 0x8d
-+};
-+static const u8 enc_output105[] __initconst = {
-+	0x74, 0x64, 0x49, 0x66, 0x70, 0xda, 0x0f, 0x3c,
-+	0x26, 0x99, 0xa7, 0x00, 0xd2, 0x3e, 0xcc, 0x3a,
-+	0xaa, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x21, 0xa8, 0x84, 0x65, 0x8a, 0x25, 0x3c, 0x0b,
-+	0x26, 0x1f, 0xc0, 0xb4, 0x66, 0xb7, 0x19, 0x01,
-+	0xaa, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x21, 0xa8, 0x84, 0x65, 0x8a, 0x25, 0x3c, 0x0b,
-+	0x26, 0x1f, 0xc0, 0xb4, 0x66, 0xb7, 0x19, 0x01,
-+	0x73, 0x6e, 0x18, 0x18, 0x16, 0x96, 0xa5, 0x88,
-+	0x9c, 0x31, 0x59, 0xfa, 0xab, 0xab, 0x20, 0xfd
-+};
-+static const u8 enc_assoc105[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce105[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key105[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input106[] __initconst = {
-+	0xad, 0xba, 0x5d, 0x10, 0x5b, 0xc8, 0xaa, 0x06,
-+	0x2c, 0x23, 0x36, 0xcb, 0x88, 0x9d, 0xdb, 0xd5,
-+	0x37, 0x3d, 0x35, 0xf6, 0x13, 0xe6, 0xd9, 0x09,
-+	0x3d, 0x38, 0xe9, 0x75, 0xc3, 0x8f, 0xe3, 0xb8,
-+	0x17, 0x7c, 0x5f, 0xfe, 0x28, 0x75, 0xf4, 0x68,
-+	0xf6, 0xc2, 0x96, 0x57, 0x48, 0xf3, 0x59, 0x9a,
-+	0xd3, 0xf6, 0x37, 0x81, 0x71, 0xea, 0xe4, 0x39,
-+	0x6e, 0xa1, 0x5d, 0xc2, 0x40, 0xd1, 0xab, 0xf4,
-+	0xcf, 0x2b, 0x22, 0x5d, 0xb1, 0x60, 0x7a, 0x10,
-+	0xe6, 0xd5, 0x40, 0x1e, 0x53, 0xb4, 0x2a, 0x8d
-+};
-+static const u8 enc_output106[] __initconst = {
-+	0xad, 0xd1, 0x8a, 0x3f, 0xdd, 0x02, 0x4a, 0x9f,
-+	0x8f, 0x0c, 0xc8, 0x01, 0x34, 0x7b, 0xa3, 0x76,
-+	0xb0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x77, 0xf9, 0x4d, 0x34, 0x1c, 0xd0, 0x24, 0x5d,
-+	0xa9, 0x09, 0x07, 0x53, 0x24, 0x69, 0xf2, 0x01,
-+	0xb0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x77, 0xf9, 0x4d, 0x34, 0x1c, 0xd0, 0x24, 0x5d,
-+	0xa9, 0x09, 0x07, 0x53, 0x24, 0x69, 0xf2, 0x01,
-+	0xba, 0xd5, 0x8f, 0x10, 0xa9, 0x1e, 0x6a, 0x88,
-+	0x9a, 0xba, 0x32, 0xfd, 0x17, 0xd8, 0x33, 0x1a
-+};
-+static const u8 enc_assoc106[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce106[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key106[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input107[] __initconst = {
-+	0xfe, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0xc0, 0x01, 0xed, 0xc5, 0xda, 0x44, 0x2e, 0x71,
-+	0x9b, 0xce, 0x9a, 0xbe, 0x27, 0x3a, 0xf1, 0x44,
-+	0xb4, 0x7a, 0xed, 0x35, 0xcb, 0x5a, 0x2f, 0xca,
-+	0xa0, 0x34, 0x6e, 0xfb, 0x93, 0x65, 0x54, 0x64,
-+	0x48, 0x02, 0x5f, 0x41, 0xfa, 0x4e, 0x33, 0x6c,
-+	0x78, 0x69, 0x57, 0xa2, 0xa7, 0xc4, 0x93, 0x0a,
-+	0x6c, 0x2d, 0x90, 0x96, 0x52, 0x4f, 0xa1, 0xb2,
-+	0xb0, 0x23, 0xb8, 0xb2, 0x88, 0x22, 0x27, 0x73,
-+	0x00, 0x26, 0x6e, 0xa1, 0xe4, 0x36, 0x44, 0xa3,
-+	0x4d, 0x8d, 0xd1, 0xdc, 0x93, 0xf2, 0xfa, 0x13
-+};
-+static const u8 enc_output107[] __initconst = {
-+	0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x47, 0xc3, 0x27, 0xcc, 0x36, 0x5d, 0x08, 0x87,
-+	0x59, 0x09, 0x8c, 0x34, 0x1b, 0x4a, 0xed, 0x03,
-+	0xd4, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x2b, 0x0b, 0x97, 0x3f, 0x74, 0x5b, 0x28, 0xaa,
-+	0xe9, 0x37, 0xf5, 0x9f, 0x18, 0xea, 0xc7, 0x01,
-+	0xd4, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x2b, 0x0b, 0x97, 0x3f, 0x74, 0x5b, 0x28, 0xaa,
-+	0xe9, 0x37, 0xf5, 0x9f, 0x18, 0xea, 0xc7, 0x01,
-+	0xd6, 0x8c, 0xe1, 0x74, 0x07, 0x9a, 0xdd, 0x02,
-+	0x8d, 0xd0, 0x5c, 0xf8, 0x14, 0x63, 0x04, 0x88
-+};
-+static const u8 enc_assoc107[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce107[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key107[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input108[] __initconst = {
-+	0xb5, 0x13, 0xb0, 0x6a, 0xb9, 0xac, 0x14, 0x43,
-+	0x5a, 0xcb, 0x8a, 0xa3, 0xa3, 0x7a, 0xfd, 0xb6,
-+	0x54, 0x3d, 0x35, 0xf6, 0x13, 0xe6, 0xd9, 0x09,
-+	0x3d, 0x38, 0xe9, 0x75, 0xc3, 0x8f, 0xe3, 0xb8,
-+	0x61, 0x95, 0x01, 0x93, 0xb1, 0xbf, 0x03, 0x11,
-+	0xff, 0x11, 0x79, 0x89, 0xae, 0xd9, 0xa9, 0x99,
-+	0xb0, 0xf6, 0x37, 0x81, 0x71, 0xea, 0xe4, 0x39,
-+	0x6e, 0xa1, 0x5d, 0xc2, 0x40, 0xd1, 0xab, 0xf4,
-+	0xb9, 0xc2, 0x7c, 0x30, 0x28, 0xaa, 0x8d, 0x69,
-+	0xef, 0x06, 0xaf, 0xc0, 0xb5, 0x9e, 0xda, 0x8e
-+};
-+static const u8 enc_output108[] __initconst = {
-+	0xb5, 0x78, 0x67, 0x45, 0x3f, 0x66, 0xf4, 0xda,
-+	0xf9, 0xe4, 0x74, 0x69, 0x1f, 0x9c, 0x85, 0x15,
-+	0xd3, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x01, 0x10, 0x13, 0x59, 0x85, 0x1a, 0xd3, 0x24,
-+	0xa0, 0xda, 0xe8, 0x8d, 0xc2, 0x43, 0x02, 0x02,
-+	0xd3, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x01, 0x10, 0x13, 0x59, 0x85, 0x1a, 0xd3, 0x24,
-+	0xa0, 0xda, 0xe8, 0x8d, 0xc2, 0x43, 0x02, 0x02,
-+	0xaa, 0x48, 0xa3, 0x88, 0x7d, 0x4b, 0x05, 0x96,
-+	0x99, 0xc2, 0xfd, 0xf9, 0xc6, 0x78, 0x7e, 0x0a
-+};
-+static const u8 enc_assoc108[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce108[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key108[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input109[] __initconst = {
-+	0xff, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0xd4, 0xf1, 0x09, 0xe8, 0x14, 0xce, 0xa8, 0x5a,
-+	0x08, 0xc0, 0x11, 0xd8, 0x50, 0xdd, 0x1d, 0xcb,
-+	0xcf, 0x7a, 0xed, 0x35, 0xcb, 0x5a, 0x2f, 0xca,
-+	0xa0, 0x34, 0x6e, 0xfb, 0x93, 0x65, 0x54, 0x64,
-+	0x53, 0x40, 0xb8, 0x5a, 0x9a, 0xa0, 0x82, 0x96,
-+	0xb7, 0x7a, 0x5f, 0xc3, 0x96, 0x1f, 0x66, 0x0f,
-+	0x17, 0x2d, 0x90, 0x96, 0x52, 0x4f, 0xa1, 0xb2,
-+	0xb0, 0x23, 0xb8, 0xb2, 0x88, 0x22, 0x27, 0x73,
-+	0x1b, 0x64, 0x89, 0xba, 0x84, 0xd8, 0xf5, 0x59,
-+	0x82, 0x9e, 0xd9, 0xbd, 0xa2, 0x29, 0x0f, 0x16
-+};
-+static const u8 enc_output109[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x53, 0x33, 0xc3, 0xe1, 0xf8, 0xd7, 0x8e, 0xac,
-+	0xca, 0x07, 0x07, 0x52, 0x6c, 0xad, 0x01, 0x8c,
-+	0xaf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x30, 0x49, 0x70, 0x24, 0x14, 0xb5, 0x99, 0x50,
-+	0x26, 0x24, 0xfd, 0xfe, 0x29, 0x31, 0x32, 0x04,
-+	0xaf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x30, 0x49, 0x70, 0x24, 0x14, 0xb5, 0x99, 0x50,
-+	0x26, 0x24, 0xfd, 0xfe, 0x29, 0x31, 0x32, 0x04,
-+	0xb9, 0x36, 0xa8, 0x17, 0xf2, 0x21, 0x1a, 0xf1,
-+	0x29, 0xe2, 0xcf, 0x16, 0x0f, 0xd4, 0x2b, 0xcb
-+};
-+static const u8 enc_assoc109[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce109[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key109[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input110[] __initconst = {
-+	0xff, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0xdf, 0x4c, 0x62, 0x03, 0x2d, 0x41, 0x19, 0xb5,
-+	0x88, 0x47, 0x7e, 0x99, 0x92, 0x5a, 0x56, 0xd9,
-+	0xd6, 0x7a, 0xed, 0x35, 0xcb, 0x5a, 0x2f, 0xca,
-+	0xa0, 0x34, 0x6e, 0xfb, 0x93, 0x65, 0x54, 0x64,
-+	0xfa, 0x84, 0xf0, 0x64, 0x55, 0x36, 0x42, 0x1b,
-+	0x2b, 0xb9, 0x24, 0x6e, 0xc2, 0x19, 0xed, 0x0b,
-+	0x0e, 0x2d, 0x90, 0x96, 0x52, 0x4f, 0xa1, 0xb2,
-+	0xb0, 0x23, 0xb8, 0xb2, 0x88, 0x22, 0x27, 0x73,
-+	0xb2, 0xa0, 0xc1, 0x84, 0x4b, 0x4e, 0x35, 0xd4,
-+	0x1e, 0x5d, 0xa2, 0x10, 0xf6, 0x2f, 0x84, 0x12
-+};
-+static const u8 enc_output110[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x58, 0x8e, 0xa8, 0x0a, 0xc1, 0x58, 0x3f, 0x43,
-+	0x4a, 0x80, 0x68, 0x13, 0xae, 0x2a, 0x4a, 0x9e,
-+	0xb6, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x99, 0x8d, 0x38, 0x1a, 0xdb, 0x23, 0x59, 0xdd,
-+	0xba, 0xe7, 0x86, 0x53, 0x7d, 0x37, 0xb9, 0x00,
-+	0xb6, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x99, 0x8d, 0x38, 0x1a, 0xdb, 0x23, 0x59, 0xdd,
-+	0xba, 0xe7, 0x86, 0x53, 0x7d, 0x37, 0xb9, 0x00,
-+	0x9f, 0x7a, 0xc4, 0x35, 0x1f, 0x6b, 0x91, 0xe6,
-+	0x30, 0x97, 0xa7, 0x13, 0x11, 0x5d, 0x05, 0xbe
-+};
-+static const u8 enc_assoc110[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce110[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key110[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input111[] __initconst = {
-+	0xff, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0x13, 0xf8, 0x0a, 0x00, 0x6d, 0xc1, 0xbb, 0xda,
-+	0xd6, 0x39, 0xa9, 0x2f, 0xc7, 0xec, 0xa6, 0x55,
-+	0xf7, 0x7a, 0xed, 0x35, 0xcb, 0x5a, 0x2f, 0xca,
-+	0xa0, 0x34, 0x6e, 0xfb, 0x93, 0x65, 0x54, 0x64,
-+	0x63, 0x48, 0xb8, 0xfd, 0x29, 0xbf, 0x96, 0xd5,
-+	0x63, 0xa5, 0x17, 0xe2, 0x7d, 0x7b, 0xfc, 0x0f,
-+	0x2f, 0x2d, 0x90, 0x96, 0x52, 0x4f, 0xa1, 0xb2,
-+	0xb0, 0x23, 0xb8, 0xb2, 0x88, 0x22, 0x27, 0x73,
-+	0x2b, 0x6c, 0x89, 0x1d, 0x37, 0xc7, 0xe1, 0x1a,
-+	0x56, 0x41, 0x91, 0x9c, 0x49, 0x4d, 0x95, 0x16
-+};
-+static const u8 enc_output111[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x94, 0x3a, 0xc0, 0x09, 0x81, 0xd8, 0x9d, 0x2c,
-+	0x14, 0xfe, 0xbf, 0xa5, 0xfb, 0x9c, 0xba, 0x12,
-+	0x97, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x41, 0x70, 0x83, 0xa7, 0xaa, 0x8d, 0x13,
-+	0xf2, 0xfb, 0xb5, 0xdf, 0xc2, 0x55, 0xa8, 0x04,
-+	0x97, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x41, 0x70, 0x83, 0xa7, 0xaa, 0x8d, 0x13,
-+	0xf2, 0xfb, 0xb5, 0xdf, 0xc2, 0x55, 0xa8, 0x04,
-+	0x9a, 0x18, 0xa8, 0x28, 0x07, 0x02, 0x69, 0xf4,
-+	0x47, 0x00, 0xd0, 0x09, 0xe7, 0x17, 0x1c, 0xc9
-+};
-+static const u8 enc_assoc111[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce111[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key111[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input112[] __initconst = {
-+	0xff, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0x82, 0xe5, 0x9b, 0x45, 0x82, 0x91, 0x50, 0x38,
-+	0xf9, 0x33, 0x81, 0x1e, 0x65, 0x2d, 0xc6, 0x6a,
-+	0xfc, 0x7a, 0xed, 0x35, 0xcb, 0x5a, 0x2f, 0xca,
-+	0xa0, 0x34, 0x6e, 0xfb, 0x93, 0x65, 0x54, 0x64,
-+	0xb6, 0x71, 0xc8, 0xca, 0xc2, 0x70, 0xc2, 0x65,
-+	0xa0, 0xac, 0x2f, 0x53, 0x57, 0x99, 0x88, 0x0a,
-+	0x24, 0x2d, 0x90, 0x96, 0x52, 0x4f, 0xa1, 0xb2,
-+	0xb0, 0x23, 0xb8, 0xb2, 0x88, 0x22, 0x27, 0x73,
-+	0xfe, 0x55, 0xf9, 0x2a, 0xdc, 0x08, 0xb5, 0xaa,
-+	0x95, 0x48, 0xa9, 0x2d, 0x63, 0xaf, 0xe1, 0x13
-+};
-+static const u8 enc_output112[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x05, 0x27, 0x51, 0x4c, 0x6e, 0x88, 0x76, 0xce,
-+	0x3b, 0xf4, 0x97, 0x94, 0x59, 0x5d, 0xda, 0x2d,
-+	0x9c, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xd5, 0x78, 0x00, 0xb4, 0x4c, 0x65, 0xd9, 0xa3,
-+	0x31, 0xf2, 0x8d, 0x6e, 0xe8, 0xb7, 0xdc, 0x01,
-+	0x9c, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xd5, 0x78, 0x00, 0xb4, 0x4c, 0x65, 0xd9, 0xa3,
-+	0x31, 0xf2, 0x8d, 0x6e, 0xe8, 0xb7, 0xdc, 0x01,
-+	0xb4, 0x36, 0xa8, 0x2b, 0x93, 0xd5, 0x55, 0xf7,
-+	0x43, 0x00, 0xd0, 0x19, 0x9b, 0xa7, 0x18, 0xce
-+};
-+static const u8 enc_assoc112[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce112[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key112[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input113[] __initconst = {
-+	0xff, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0xf1, 0xd1, 0x28, 0x87, 0xb7, 0x21, 0x69, 0x86,
-+	0xa1, 0x2d, 0x79, 0x09, 0x8b, 0x6d, 0xe6, 0x0f,
-+	0xc0, 0x7a, 0xed, 0x35, 0xcb, 0x5a, 0x2f, 0xca,
-+	0xa0, 0x34, 0x6e, 0xfb, 0x93, 0x65, 0x54, 0x64,
-+	0xa7, 0xc7, 0x58, 0x99, 0xf3, 0xe6, 0x0a, 0xf1,
-+	0xfc, 0xb6, 0xc7, 0x30, 0x7d, 0x87, 0x59, 0x0f,
-+	0x18, 0x2d, 0x90, 0x96, 0x52, 0x4f, 0xa1, 0xb2,
-+	0xb0, 0x23, 0xb8, 0xb2, 0x88, 0x22, 0x27, 0x73,
-+	0xef, 0xe3, 0x69, 0x79, 0xed, 0x9e, 0x7d, 0x3e,
-+	0xc9, 0x52, 0x41, 0x4e, 0x49, 0xb1, 0x30, 0x16
-+};
-+static const u8 enc_output113[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x76, 0x13, 0xe2, 0x8e, 0x5b, 0x38, 0x4f, 0x70,
-+	0x63, 0xea, 0x6f, 0x83, 0xb7, 0x1d, 0xfa, 0x48,
-+	0xa0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xc4, 0xce, 0x90, 0xe7, 0x7d, 0xf3, 0x11, 0x37,
-+	0x6d, 0xe8, 0x65, 0x0d, 0xc2, 0xa9, 0x0d, 0x04,
-+	0xa0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xc4, 0xce, 0x90, 0xe7, 0x7d, 0xf3, 0x11, 0x37,
-+	0x6d, 0xe8, 0x65, 0x0d, 0xc2, 0xa9, 0x0d, 0x04,
-+	0xce, 0x54, 0xa8, 0x2e, 0x1f, 0xa9, 0x42, 0xfa,
-+	0x3f, 0x00, 0xd0, 0x29, 0x4f, 0x37, 0x15, 0xd3
-+};
-+static const u8 enc_assoc113[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce113[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key113[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input114[] __initconst = {
-+	0xcb, 0xf1, 0xda, 0x9e, 0x0b, 0xa9, 0x37, 0x73,
-+	0x74, 0xe6, 0x9e, 0x1c, 0x0e, 0x60, 0x0c, 0xfc,
-+	0x34, 0x3d, 0x35, 0xf6, 0x13, 0xe6, 0xd9, 0x09,
-+	0x3d, 0x38, 0xe9, 0x75, 0xc3, 0x8f, 0xe3, 0xb8,
-+	0xbe, 0x3f, 0xa6, 0x6b, 0x6c, 0xe7, 0x80, 0x8a,
-+	0xa3, 0xe4, 0x59, 0x49, 0xf9, 0x44, 0x64, 0x9f,
-+	0xd0, 0xf6, 0x37, 0x81, 0x71, 0xea, 0xe4, 0x39,
-+	0x6e, 0xa1, 0x5d, 0xc2, 0x40, 0xd1, 0xab, 0xf4,
-+	0x66, 0x68, 0xdb, 0xc8, 0xf5, 0xf2, 0x0e, 0xf2,
-+	0xb3, 0xf3, 0x8f, 0x00, 0xe2, 0x03, 0x17, 0x88
-+};
-+static const u8 enc_output114[] __initconst = {
-+	0xcb, 0x9a, 0x0d, 0xb1, 0x8d, 0x63, 0xd7, 0xea,
-+	0xd7, 0xc9, 0x60, 0xd6, 0xb2, 0x86, 0x74, 0x5f,
-+	0xb3, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xde, 0xba, 0xb4, 0xa1, 0x58, 0x42, 0x50, 0xbf,
-+	0xfc, 0x2f, 0xc8, 0x4d, 0x95, 0xde, 0xcf, 0x04,
-+	0xb3, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xde, 0xba, 0xb4, 0xa1, 0x58, 0x42, 0x50, 0xbf,
-+	0xfc, 0x2f, 0xc8, 0x4d, 0x95, 0xde, 0xcf, 0x04,
-+	0x23, 0x83, 0xab, 0x0b, 0x79, 0x92, 0x05, 0x69,
-+	0x9b, 0x51, 0x0a, 0xa7, 0x09, 0xbf, 0x31, 0xf1
-+};
-+static const u8 enc_assoc114[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce114[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key114[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input115[] __initconst = {
-+	0x8f, 0x27, 0x86, 0x94, 0xc4, 0xe9, 0xda, 0xeb,
-+	0xd5, 0x8d, 0x3e, 0x5b, 0x96, 0x6e, 0x8b, 0x68,
-+	0x42, 0x3d, 0x35, 0xf6, 0x13, 0xe6, 0xd9, 0x09,
-+	0x3d, 0x38, 0xe9, 0x75, 0xc3, 0x8f, 0xe3, 0xb8,
-+	0x06, 0x53, 0xe7, 0xa3, 0x31, 0x71, 0x88, 0x33,
-+	0xac, 0xc3, 0xb9, 0xad, 0xff, 0x1c, 0x31, 0x98,
-+	0xa6, 0xf6, 0x37, 0x81, 0x71, 0xea, 0xe4, 0x39,
-+	0x6e, 0xa1, 0x5d, 0xc2, 0x40, 0xd1, 0xab, 0xf4,
-+	0xde, 0x04, 0x9a, 0x00, 0xa8, 0x64, 0x06, 0x4b,
-+	0xbc, 0xd4, 0x6f, 0xe4, 0xe4, 0x5b, 0x42, 0x8f
-+};
-+static const u8 enc_output115[] __initconst = {
-+	0x8f, 0x4c, 0x51, 0xbb, 0x42, 0x23, 0x3a, 0x72,
-+	0x76, 0xa2, 0xc0, 0x91, 0x2a, 0x88, 0xf3, 0xcb,
-+	0xc5, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x66, 0xd6, 0xf5, 0x69, 0x05, 0xd4, 0x58, 0x06,
-+	0xf3, 0x08, 0x28, 0xa9, 0x93, 0x86, 0x9a, 0x03,
-+	0xc5, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x66, 0xd6, 0xf5, 0x69, 0x05, 0xd4, 0x58, 0x06,
-+	0xf3, 0x08, 0x28, 0xa9, 0x93, 0x86, 0x9a, 0x03,
-+	0x8b, 0xfb, 0xab, 0x17, 0xa9, 0xe0, 0xb8, 0x74,
-+	0x8b, 0x51, 0x0a, 0xe7, 0xd9, 0xfd, 0x23, 0x05
-+};
-+static const u8 enc_assoc115[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce115[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key115[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input116[] __initconst = {
-+	0xd5, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0x9a, 0x22, 0xd7, 0x0a, 0x48, 0xe2, 0x4f, 0xdd,
-+	0xcd, 0xd4, 0x41, 0x9d, 0xe6, 0x4c, 0x8f, 0x44,
-+	0xfc, 0x7a, 0xed, 0x35, 0xcb, 0x5a, 0x2f, 0xca,
-+	0xa0, 0x34, 0x6e, 0xfb, 0x93, 0x65, 0x54, 0x64,
-+	0x77, 0xb5, 0xc9, 0x07, 0xd9, 0xc9, 0xe1, 0xea,
-+	0x51, 0x85, 0x1a, 0x20, 0x4a, 0xad, 0x9f, 0x0a,
-+	0x24, 0x2d, 0x90, 0x96, 0x52, 0x4f, 0xa1, 0xb2,
-+	0xb0, 0x23, 0xb8, 0xb2, 0x88, 0x22, 0x27, 0x73,
-+	0x3f, 0x91, 0xf8, 0xe7, 0xc7, 0xb1, 0x96, 0x25,
-+	0x64, 0x61, 0x9c, 0x5e, 0x7e, 0x9b, 0xf6, 0x13
-+};
-+static const u8 enc_output116[] __initconst = {
-+	0xd5, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x1d, 0xe0, 0x1d, 0x03, 0xa4, 0xfb, 0x69, 0x2b,
-+	0x0f, 0x13, 0x57, 0x17, 0xda, 0x3c, 0x93, 0x03,
-+	0x9c, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x14, 0xbc, 0x01, 0x79, 0x57, 0xdc, 0xfa, 0x2c,
-+	0xc0, 0xdb, 0xb8, 0x1d, 0xf5, 0x83, 0xcb, 0x01,
-+	0x9c, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x14, 0xbc, 0x01, 0x79, 0x57, 0xdc, 0xfa, 0x2c,
-+	0xc0, 0xdb, 0xb8, 0x1d, 0xf5, 0x83, 0xcb, 0x01,
-+	0x49, 0xbc, 0x6e, 0x9f, 0xc5, 0x1c, 0x4d, 0x50,
-+	0x30, 0x36, 0x64, 0x4d, 0x84, 0x27, 0x73, 0xd2
-+};
-+static const u8 enc_assoc116[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce116[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key116[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input117[] __initconst = {
-+	0xdb, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0x75, 0xd5, 0x64, 0x3a, 0xa5, 0xaf, 0x93, 0x4d,
-+	0x8c, 0xce, 0x39, 0x2c, 0xc3, 0xee, 0xdb, 0x47,
-+	0xc0, 0x7a, 0xed, 0x35, 0xcb, 0x5a, 0x2f, 0xca,
-+	0xa0, 0x34, 0x6e, 0xfb, 0x93, 0x65, 0x54, 0x64,
-+	0x60, 0x1b, 0x5a, 0xd2, 0x06, 0x7f, 0x28, 0x06,
-+	0x6a, 0x8f, 0x32, 0x81, 0x71, 0x5b, 0xa8, 0x08,
-+	0x18, 0x2d, 0x90, 0x96, 0x52, 0x4f, 0xa1, 0xb2,
-+	0xb0, 0x23, 0xb8, 0xb2, 0x88, 0x22, 0x27, 0x73,
-+	0x28, 0x3f, 0x6b, 0x32, 0x18, 0x07, 0x5f, 0xc9,
-+	0x5f, 0x6b, 0xb4, 0xff, 0x45, 0x6d, 0xc1, 0x11
-+};
-+static const u8 enc_output117[] __initconst = {
-+	0xdb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xf2, 0x17, 0xae, 0x33, 0x49, 0xb6, 0xb5, 0xbb,
-+	0x4e, 0x09, 0x2f, 0xa6, 0xff, 0x9e, 0xc7, 0x00,
-+	0xa0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x03, 0x12, 0x92, 0xac, 0x88, 0x6a, 0x33, 0xc0,
-+	0xfb, 0xd1, 0x90, 0xbc, 0xce, 0x75, 0xfc, 0x03,
-+	0xa0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x03, 0x12, 0x92, 0xac, 0x88, 0x6a, 0x33, 0xc0,
-+	0xfb, 0xd1, 0x90, 0xbc, 0xce, 0x75, 0xfc, 0x03,
-+	0x63, 0xda, 0x6e, 0xa2, 0x51, 0xf0, 0x39, 0x53,
-+	0x2c, 0x36, 0x64, 0x5d, 0x38, 0xb7, 0x6f, 0xd7
-+};
-+static const u8 enc_assoc117[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce117[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key117[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - edge case intermediate sums in poly1305 */
-+static const u8 enc_input118[] __initconst = {
-+	0x93, 0x94, 0x28, 0xd0, 0x79, 0x35, 0x1f, 0x66,
-+	0x5c, 0xd0, 0x01, 0x35, 0x43, 0x19, 0x87, 0x5c,
-+	0x62, 0x48, 0x39, 0x60, 0x42, 0x16, 0xe4, 0x03,
-+	0xeb, 0xcc, 0x6a, 0xf5, 0x59, 0xec, 0x8b, 0x43,
-+	0x97, 0x7a, 0xed, 0x35, 0xcb, 0x5a, 0x2f, 0xca,
-+	0xa0, 0x34, 0x6e, 0xfb, 0x93, 0x65, 0x54, 0x64,
-+	0xd8, 0xc8, 0xc3, 0xfa, 0x1a, 0x9e, 0x47, 0x4a,
-+	0xbe, 0x52, 0xd0, 0x2c, 0x81, 0x87, 0xe9, 0x0f,
-+	0x4f, 0x2d, 0x90, 0x96, 0x52, 0x4f, 0xa1, 0xb2,
-+	0xb0, 0x23, 0xb8, 0xb2, 0x88, 0x22, 0x27, 0x73,
-+	0x90, 0xec, 0xf2, 0x1a, 0x04, 0xe6, 0x30, 0x85,
-+	0x8b, 0xb6, 0x56, 0x52, 0xb5, 0xb1, 0x80, 0x16
-+};
-+static const u8 enc_output118[] __initconst = {
-+	0x93, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xe5, 0x8a, 0xf3, 0x69, 0xae, 0x0f, 0xc2, 0xf5,
-+	0x29, 0x0b, 0x7c, 0x7f, 0x65, 0x9c, 0x97, 0x04,
-+	0xf7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xbb, 0xc1, 0x0b, 0x84, 0x94, 0x8b, 0x5c, 0x8c,
-+	0x2f, 0x0c, 0x72, 0x11, 0x3e, 0xa9, 0xbd, 0x04,
-+	0xf7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xbb, 0xc1, 0x0b, 0x84, 0x94, 0x8b, 0x5c, 0x8c,
-+	0x2f, 0x0c, 0x72, 0x11, 0x3e, 0xa9, 0xbd, 0x04,
-+	0x73, 0xeb, 0x27, 0x24, 0xb5, 0xc4, 0x05, 0xf0,
-+	0x4d, 0x00, 0xd0, 0xf1, 0x58, 0x40, 0xa1, 0xc1
-+};
-+static const u8 enc_assoc118[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce118[] __initconst = {
-+	0x00, 0x00, 0x00, 0x00, 0x06, 0x4c, 0x2d, 0x52
-+};
-+static const u8 enc_key118[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+static const struct chacha20poly1305_testvec
-+chacha20poly1305_enc_vectors[] __initconst = {
-+	{ enc_input001, enc_output001, enc_assoc001, enc_nonce001, enc_key001,
-+	  sizeof(enc_input001), sizeof(enc_assoc001), sizeof(enc_nonce001) },
-+	{ enc_input002, enc_output002, enc_assoc002, enc_nonce002, enc_key002,
-+	  sizeof(enc_input002), sizeof(enc_assoc002), sizeof(enc_nonce002) },
-+	{ enc_input003, enc_output003, enc_assoc003, enc_nonce003, enc_key003,
-+	  sizeof(enc_input003), sizeof(enc_assoc003), sizeof(enc_nonce003) },
-+	{ enc_input004, enc_output004, enc_assoc004, enc_nonce004, enc_key004,
-+	  sizeof(enc_input004), sizeof(enc_assoc004), sizeof(enc_nonce004) },
-+	{ enc_input005, enc_output005, enc_assoc005, enc_nonce005, enc_key005,
-+	  sizeof(enc_input005), sizeof(enc_assoc005), sizeof(enc_nonce005) },
-+	{ enc_input006, enc_output006, enc_assoc006, enc_nonce006, enc_key006,
-+	  sizeof(enc_input006), sizeof(enc_assoc006), sizeof(enc_nonce006) },
-+	{ enc_input007, enc_output007, enc_assoc007, enc_nonce007, enc_key007,
-+	  sizeof(enc_input007), sizeof(enc_assoc007), sizeof(enc_nonce007) },
-+	{ enc_input008, enc_output008, enc_assoc008, enc_nonce008, enc_key008,
-+	  sizeof(enc_input008), sizeof(enc_assoc008), sizeof(enc_nonce008) },
-+	{ enc_input009, enc_output009, enc_assoc009, enc_nonce009, enc_key009,
-+	  sizeof(enc_input009), sizeof(enc_assoc009), sizeof(enc_nonce009) },
-+	{ enc_input010, enc_output010, enc_assoc010, enc_nonce010, enc_key010,
-+	  sizeof(enc_input010), sizeof(enc_assoc010), sizeof(enc_nonce010) },
-+	{ enc_input011, enc_output011, enc_assoc011, enc_nonce011, enc_key011,
-+	  sizeof(enc_input011), sizeof(enc_assoc011), sizeof(enc_nonce011) },
-+	{ enc_input012, enc_output012, enc_assoc012, enc_nonce012, enc_key012,
-+	  sizeof(enc_input012), sizeof(enc_assoc012), sizeof(enc_nonce012) },
-+	{ enc_input053, enc_output053, enc_assoc053, enc_nonce053, enc_key053,
-+	  sizeof(enc_input053), sizeof(enc_assoc053), sizeof(enc_nonce053) },
-+	{ enc_input054, enc_output054, enc_assoc054, enc_nonce054, enc_key054,
-+	  sizeof(enc_input054), sizeof(enc_assoc054), sizeof(enc_nonce054) },
-+	{ enc_input055, enc_output055, enc_assoc055, enc_nonce055, enc_key055,
-+	  sizeof(enc_input055), sizeof(enc_assoc055), sizeof(enc_nonce055) },
-+	{ enc_input056, enc_output056, enc_assoc056, enc_nonce056, enc_key056,
-+	  sizeof(enc_input056), sizeof(enc_assoc056), sizeof(enc_nonce056) },
-+	{ enc_input057, enc_output057, enc_assoc057, enc_nonce057, enc_key057,
-+	  sizeof(enc_input057), sizeof(enc_assoc057), sizeof(enc_nonce057) },
-+	{ enc_input058, enc_output058, enc_assoc058, enc_nonce058, enc_key058,
-+	  sizeof(enc_input058), sizeof(enc_assoc058), sizeof(enc_nonce058) },
-+	{ enc_input059, enc_output059, enc_assoc059, enc_nonce059, enc_key059,
-+	  sizeof(enc_input059), sizeof(enc_assoc059), sizeof(enc_nonce059) },
-+	{ enc_input060, enc_output060, enc_assoc060, enc_nonce060, enc_key060,
-+	  sizeof(enc_input060), sizeof(enc_assoc060), sizeof(enc_nonce060) },
-+	{ enc_input061, enc_output061, enc_assoc061, enc_nonce061, enc_key061,
-+	  sizeof(enc_input061), sizeof(enc_assoc061), sizeof(enc_nonce061) },
-+	{ enc_input062, enc_output062, enc_assoc062, enc_nonce062, enc_key062,
-+	  sizeof(enc_input062), sizeof(enc_assoc062), sizeof(enc_nonce062) },
-+	{ enc_input063, enc_output063, enc_assoc063, enc_nonce063, enc_key063,
-+	  sizeof(enc_input063), sizeof(enc_assoc063), sizeof(enc_nonce063) },
-+	{ enc_input064, enc_output064, enc_assoc064, enc_nonce064, enc_key064,
-+	  sizeof(enc_input064), sizeof(enc_assoc064), sizeof(enc_nonce064) },
-+	{ enc_input065, enc_output065, enc_assoc065, enc_nonce065, enc_key065,
-+	  sizeof(enc_input065), sizeof(enc_assoc065), sizeof(enc_nonce065) },
-+	{ enc_input066, enc_output066, enc_assoc066, enc_nonce066, enc_key066,
-+	  sizeof(enc_input066), sizeof(enc_assoc066), sizeof(enc_nonce066) },
-+	{ enc_input067, enc_output067, enc_assoc067, enc_nonce067, enc_key067,
-+	  sizeof(enc_input067), sizeof(enc_assoc067), sizeof(enc_nonce067) },
-+	{ enc_input068, enc_output068, enc_assoc068, enc_nonce068, enc_key068,
-+	  sizeof(enc_input068), sizeof(enc_assoc068), sizeof(enc_nonce068) },
-+	{ enc_input069, enc_output069, enc_assoc069, enc_nonce069, enc_key069,
-+	  sizeof(enc_input069), sizeof(enc_assoc069), sizeof(enc_nonce069) },
-+	{ enc_input070, enc_output070, enc_assoc070, enc_nonce070, enc_key070,
-+	  sizeof(enc_input070), sizeof(enc_assoc070), sizeof(enc_nonce070) },
-+	{ enc_input071, enc_output071, enc_assoc071, enc_nonce071, enc_key071,
-+	  sizeof(enc_input071), sizeof(enc_assoc071), sizeof(enc_nonce071) },
-+	{ enc_input072, enc_output072, enc_assoc072, enc_nonce072, enc_key072,
-+	  sizeof(enc_input072), sizeof(enc_assoc072), sizeof(enc_nonce072) },
-+	{ enc_input073, enc_output073, enc_assoc073, enc_nonce073, enc_key073,
-+	  sizeof(enc_input073), sizeof(enc_assoc073), sizeof(enc_nonce073) },
-+	{ enc_input076, enc_output076, enc_assoc076, enc_nonce076, enc_key076,
-+	  sizeof(enc_input076), sizeof(enc_assoc076), sizeof(enc_nonce076) },
-+	{ enc_input077, enc_output077, enc_assoc077, enc_nonce077, enc_key077,
-+	  sizeof(enc_input077), sizeof(enc_assoc077), sizeof(enc_nonce077) },
-+	{ enc_input078, enc_output078, enc_assoc078, enc_nonce078, enc_key078,
-+	  sizeof(enc_input078), sizeof(enc_assoc078), sizeof(enc_nonce078) },
-+	{ enc_input079, enc_output079, enc_assoc079, enc_nonce079, enc_key079,
-+	  sizeof(enc_input079), sizeof(enc_assoc079), sizeof(enc_nonce079) },
-+	{ enc_input080, enc_output080, enc_assoc080, enc_nonce080, enc_key080,
-+	  sizeof(enc_input080), sizeof(enc_assoc080), sizeof(enc_nonce080) },
-+	{ enc_input081, enc_output081, enc_assoc081, enc_nonce081, enc_key081,
-+	  sizeof(enc_input081), sizeof(enc_assoc081), sizeof(enc_nonce081) },
-+	{ enc_input082, enc_output082, enc_assoc082, enc_nonce082, enc_key082,
-+	  sizeof(enc_input082), sizeof(enc_assoc082), sizeof(enc_nonce082) },
-+	{ enc_input083, enc_output083, enc_assoc083, enc_nonce083, enc_key083,
-+	  sizeof(enc_input083), sizeof(enc_assoc083), sizeof(enc_nonce083) },
-+	{ enc_input084, enc_output084, enc_assoc084, enc_nonce084, enc_key084,
-+	  sizeof(enc_input084), sizeof(enc_assoc084), sizeof(enc_nonce084) },
-+	{ enc_input085, enc_output085, enc_assoc085, enc_nonce085, enc_key085,
-+	  sizeof(enc_input085), sizeof(enc_assoc085), sizeof(enc_nonce085) },
-+	{ enc_input093, enc_output093, enc_assoc093, enc_nonce093, enc_key093,
-+	  sizeof(enc_input093), sizeof(enc_assoc093), sizeof(enc_nonce093) },
-+	{ enc_input094, enc_output094, enc_assoc094, enc_nonce094, enc_key094,
-+	  sizeof(enc_input094), sizeof(enc_assoc094), sizeof(enc_nonce094) },
-+	{ enc_input095, enc_output095, enc_assoc095, enc_nonce095, enc_key095,
-+	  sizeof(enc_input095), sizeof(enc_assoc095), sizeof(enc_nonce095) },
-+	{ enc_input096, enc_output096, enc_assoc096, enc_nonce096, enc_key096,
-+	  sizeof(enc_input096), sizeof(enc_assoc096), sizeof(enc_nonce096) },
-+	{ enc_input097, enc_output097, enc_assoc097, enc_nonce097, enc_key097,
-+	  sizeof(enc_input097), sizeof(enc_assoc097), sizeof(enc_nonce097) },
-+	{ enc_input098, enc_output098, enc_assoc098, enc_nonce098, enc_key098,
-+	  sizeof(enc_input098), sizeof(enc_assoc098), sizeof(enc_nonce098) },
-+	{ enc_input099, enc_output099, enc_assoc099, enc_nonce099, enc_key099,
-+	  sizeof(enc_input099), sizeof(enc_assoc099), sizeof(enc_nonce099) },
-+	{ enc_input100, enc_output100, enc_assoc100, enc_nonce100, enc_key100,
-+	  sizeof(enc_input100), sizeof(enc_assoc100), sizeof(enc_nonce100) },
-+	{ enc_input101, enc_output101, enc_assoc101, enc_nonce101, enc_key101,
-+	  sizeof(enc_input101), sizeof(enc_assoc101), sizeof(enc_nonce101) },
-+	{ enc_input102, enc_output102, enc_assoc102, enc_nonce102, enc_key102,
-+	  sizeof(enc_input102), sizeof(enc_assoc102), sizeof(enc_nonce102) },
-+	{ enc_input103, enc_output103, enc_assoc103, enc_nonce103, enc_key103,
-+	  sizeof(enc_input103), sizeof(enc_assoc103), sizeof(enc_nonce103) },
-+	{ enc_input104, enc_output104, enc_assoc104, enc_nonce104, enc_key104,
-+	  sizeof(enc_input104), sizeof(enc_assoc104), sizeof(enc_nonce104) },
-+	{ enc_input105, enc_output105, enc_assoc105, enc_nonce105, enc_key105,
-+	  sizeof(enc_input105), sizeof(enc_assoc105), sizeof(enc_nonce105) },
-+	{ enc_input106, enc_output106, enc_assoc106, enc_nonce106, enc_key106,
-+	  sizeof(enc_input106), sizeof(enc_assoc106), sizeof(enc_nonce106) },
-+	{ enc_input107, enc_output107, enc_assoc107, enc_nonce107, enc_key107,
-+	  sizeof(enc_input107), sizeof(enc_assoc107), sizeof(enc_nonce107) },
-+	{ enc_input108, enc_output108, enc_assoc108, enc_nonce108, enc_key108,
-+	  sizeof(enc_input108), sizeof(enc_assoc108), sizeof(enc_nonce108) },
-+	{ enc_input109, enc_output109, enc_assoc109, enc_nonce109, enc_key109,
-+	  sizeof(enc_input109), sizeof(enc_assoc109), sizeof(enc_nonce109) },
-+	{ enc_input110, enc_output110, enc_assoc110, enc_nonce110, enc_key110,
-+	  sizeof(enc_input110), sizeof(enc_assoc110), sizeof(enc_nonce110) },
-+	{ enc_input111, enc_output111, enc_assoc111, enc_nonce111, enc_key111,
-+	  sizeof(enc_input111), sizeof(enc_assoc111), sizeof(enc_nonce111) },
-+	{ enc_input112, enc_output112, enc_assoc112, enc_nonce112, enc_key112,
-+	  sizeof(enc_input112), sizeof(enc_assoc112), sizeof(enc_nonce112) },
-+	{ enc_input113, enc_output113, enc_assoc113, enc_nonce113, enc_key113,
-+	  sizeof(enc_input113), sizeof(enc_assoc113), sizeof(enc_nonce113) },
-+	{ enc_input114, enc_output114, enc_assoc114, enc_nonce114, enc_key114,
-+	  sizeof(enc_input114), sizeof(enc_assoc114), sizeof(enc_nonce114) },
-+	{ enc_input115, enc_output115, enc_assoc115, enc_nonce115, enc_key115,
-+	  sizeof(enc_input115), sizeof(enc_assoc115), sizeof(enc_nonce115) },
-+	{ enc_input116, enc_output116, enc_assoc116, enc_nonce116, enc_key116,
-+	  sizeof(enc_input116), sizeof(enc_assoc116), sizeof(enc_nonce116) },
-+	{ enc_input117, enc_output117, enc_assoc117, enc_nonce117, enc_key117,
-+	  sizeof(enc_input117), sizeof(enc_assoc117), sizeof(enc_nonce117) },
-+	{ enc_input118, enc_output118, enc_assoc118, enc_nonce118, enc_key118,
-+	  sizeof(enc_input118), sizeof(enc_assoc118), sizeof(enc_nonce118) }
-+};
-+
-+static const u8 dec_input001[] __initconst = {
-+	0x64, 0xa0, 0x86, 0x15, 0x75, 0x86, 0x1a, 0xf4,
-+	0x60, 0xf0, 0x62, 0xc7, 0x9b, 0xe6, 0x43, 0xbd,
-+	0x5e, 0x80, 0x5c, 0xfd, 0x34, 0x5c, 0xf3, 0x89,
-+	0xf1, 0x08, 0x67, 0x0a, 0xc7, 0x6c, 0x8c, 0xb2,
-+	0x4c, 0x6c, 0xfc, 0x18, 0x75, 0x5d, 0x43, 0xee,
-+	0xa0, 0x9e, 0xe9, 0x4e, 0x38, 0x2d, 0x26, 0xb0,
-+	0xbd, 0xb7, 0xb7, 0x3c, 0x32, 0x1b, 0x01, 0x00,
-+	0xd4, 0xf0, 0x3b, 0x7f, 0x35, 0x58, 0x94, 0xcf,
-+	0x33, 0x2f, 0x83, 0x0e, 0x71, 0x0b, 0x97, 0xce,
-+	0x98, 0xc8, 0xa8, 0x4a, 0xbd, 0x0b, 0x94, 0x81,
-+	0x14, 0xad, 0x17, 0x6e, 0x00, 0x8d, 0x33, 0xbd,
-+	0x60, 0xf9, 0x82, 0xb1, 0xff, 0x37, 0xc8, 0x55,
-+	0x97, 0x97, 0xa0, 0x6e, 0xf4, 0xf0, 0xef, 0x61,
-+	0xc1, 0x86, 0x32, 0x4e, 0x2b, 0x35, 0x06, 0x38,
-+	0x36, 0x06, 0x90, 0x7b, 0x6a, 0x7c, 0x02, 0xb0,
-+	0xf9, 0xf6, 0x15, 0x7b, 0x53, 0xc8, 0x67, 0xe4,
-+	0xb9, 0x16, 0x6c, 0x76, 0x7b, 0x80, 0x4d, 0x46,
-+	0xa5, 0x9b, 0x52, 0x16, 0xcd, 0xe7, 0xa4, 0xe9,
-+	0x90, 0x40, 0xc5, 0xa4, 0x04, 0x33, 0x22, 0x5e,
-+	0xe2, 0x82, 0xa1, 0xb0, 0xa0, 0x6c, 0x52, 0x3e,
-+	0xaf, 0x45, 0x34, 0xd7, 0xf8, 0x3f, 0xa1, 0x15,
-+	0x5b, 0x00, 0x47, 0x71, 0x8c, 0xbc, 0x54, 0x6a,
-+	0x0d, 0x07, 0x2b, 0x04, 0xb3, 0x56, 0x4e, 0xea,
-+	0x1b, 0x42, 0x22, 0x73, 0xf5, 0x48, 0x27, 0x1a,
-+	0x0b, 0xb2, 0x31, 0x60, 0x53, 0xfa, 0x76, 0x99,
-+	0x19, 0x55, 0xeb, 0xd6, 0x31, 0x59, 0x43, 0x4e,
-+	0xce, 0xbb, 0x4e, 0x46, 0x6d, 0xae, 0x5a, 0x10,
-+	0x73, 0xa6, 0x72, 0x76, 0x27, 0x09, 0x7a, 0x10,
-+	0x49, 0xe6, 0x17, 0xd9, 0x1d, 0x36, 0x10, 0x94,
-+	0xfa, 0x68, 0xf0, 0xff, 0x77, 0x98, 0x71, 0x30,
-+	0x30, 0x5b, 0xea, 0xba, 0x2e, 0xda, 0x04, 0xdf,
-+	0x99, 0x7b, 0x71, 0x4d, 0x6c, 0x6f, 0x2c, 0x29,
-+	0xa6, 0xad, 0x5c, 0xb4, 0x02, 0x2b, 0x02, 0x70,
-+	0x9b, 0xee, 0xad, 0x9d, 0x67, 0x89, 0x0c, 0xbb,
-+	0x22, 0x39, 0x23, 0x36, 0xfe, 0xa1, 0x85, 0x1f,
-+	0x38
-+};
-+static const u8 dec_output001[] __initconst = {
-+	0x49, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x65, 0x74,
-+	0x2d, 0x44, 0x72, 0x61, 0x66, 0x74, 0x73, 0x20,
-+	0x61, 0x72, 0x65, 0x20, 0x64, 0x72, 0x61, 0x66,
-+	0x74, 0x20, 0x64, 0x6f, 0x63, 0x75, 0x6d, 0x65,
-+	0x6e, 0x74, 0x73, 0x20, 0x76, 0x61, 0x6c, 0x69,
-+	0x64, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x61, 0x20,
-+	0x6d, 0x61, 0x78, 0x69, 0x6d, 0x75, 0x6d, 0x20,
-+	0x6f, 0x66, 0x20, 0x73, 0x69, 0x78, 0x20, 0x6d,
-+	0x6f, 0x6e, 0x74, 0x68, 0x73, 0x20, 0x61, 0x6e,
-+	0x64, 0x20, 0x6d, 0x61, 0x79, 0x20, 0x62, 0x65,
-+	0x20, 0x75, 0x70, 0x64, 0x61, 0x74, 0x65, 0x64,
-+	0x2c, 0x20, 0x72, 0x65, 0x70, 0x6c, 0x61, 0x63,
-+	0x65, 0x64, 0x2c, 0x20, 0x6f, 0x72, 0x20, 0x6f,
-+	0x62, 0x73, 0x6f, 0x6c, 0x65, 0x74, 0x65, 0x64,
-+	0x20, 0x62, 0x79, 0x20, 0x6f, 0x74, 0x68, 0x65,
-+	0x72, 0x20, 0x64, 0x6f, 0x63, 0x75, 0x6d, 0x65,
-+	0x6e, 0x74, 0x73, 0x20, 0x61, 0x74, 0x20, 0x61,
-+	0x6e, 0x79, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x2e,
-+	0x20, 0x49, 0x74, 0x20, 0x69, 0x73, 0x20, 0x69,
-+	0x6e, 0x61, 0x70, 0x70, 0x72, 0x6f, 0x70, 0x72,
-+	0x69, 0x61, 0x74, 0x65, 0x20, 0x74, 0x6f, 0x20,
-+	0x75, 0x73, 0x65, 0x20, 0x49, 0x6e, 0x74, 0x65,
-+	0x72, 0x6e, 0x65, 0x74, 0x2d, 0x44, 0x72, 0x61,
-+	0x66, 0x74, 0x73, 0x20, 0x61, 0x73, 0x20, 0x72,
-+	0x65, 0x66, 0x65, 0x72, 0x65, 0x6e, 0x63, 0x65,
-+	0x20, 0x6d, 0x61, 0x74, 0x65, 0x72, 0x69, 0x61,
-+	0x6c, 0x20, 0x6f, 0x72, 0x20, 0x74, 0x6f, 0x20,
-+	0x63, 0x69, 0x74, 0x65, 0x20, 0x74, 0x68, 0x65,
-+	0x6d, 0x20, 0x6f, 0x74, 0x68, 0x65, 0x72, 0x20,
-+	0x74, 0x68, 0x61, 0x6e, 0x20, 0x61, 0x73, 0x20,
-+	0x2f, 0xe2, 0x80, 0x9c, 0x77, 0x6f, 0x72, 0x6b,
-+	0x20, 0x69, 0x6e, 0x20, 0x70, 0x72, 0x6f, 0x67,
-+	0x72, 0x65, 0x73, 0x73, 0x2e, 0x2f, 0xe2, 0x80,
-+	0x9d
-+};
-+static const u8 dec_assoc001[] __initconst = {
-+	0xf3, 0x33, 0x88, 0x86, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x4e, 0x91
-+};
-+static const u8 dec_nonce001[] __initconst = {
-+	0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08
-+};
-+static const u8 dec_key001[] __initconst = {
-+	0x1c, 0x92, 0x40, 0xa5, 0xeb, 0x55, 0xd3, 0x8a,
-+	0xf3, 0x33, 0x88, 0x86, 0x04, 0xf6, 0xb5, 0xf0,
-+	0x47, 0x39, 0x17, 0xc1, 0x40, 0x2b, 0x80, 0x09,
-+	0x9d, 0xca, 0x5c, 0xbc, 0x20, 0x70, 0x75, 0xc0
-+};
-+
-+static const u8 dec_input002[] __initconst = {
-+	0xea, 0xe0, 0x1e, 0x9e, 0x2c, 0x91, 0xaa, 0xe1,
-+	0xdb, 0x5d, 0x99, 0x3f, 0x8a, 0xf7, 0x69, 0x92
-+};
-+static const u8 dec_output002[] __initconst = { };
-+static const u8 dec_assoc002[] __initconst = { };
-+static const u8 dec_nonce002[] __initconst = {
-+	0xca, 0xbf, 0x33, 0x71, 0x32, 0x45, 0x77, 0x8e
-+};
-+static const u8 dec_key002[] __initconst = {
-+	0x4c, 0xf5, 0x96, 0x83, 0x38, 0xe6, 0xae, 0x7f,
-+	0x2d, 0x29, 0x25, 0x76, 0xd5, 0x75, 0x27, 0x86,
-+	0x91, 0x9a, 0x27, 0x7a, 0xfb, 0x46, 0xc5, 0xef,
-+	0x94, 0x81, 0x79, 0x57, 0x14, 0x59, 0x40, 0x68
-+};
-+
-+static const u8 dec_input003[] __initconst = {
-+	0xdd, 0x6b, 0x3b, 0x82, 0xce, 0x5a, 0xbd, 0xd6,
-+	0xa9, 0x35, 0x83, 0xd8, 0x8c, 0x3d, 0x85, 0x77
-+};
-+static const u8 dec_output003[] __initconst = { };
-+static const u8 dec_assoc003[] __initconst = {
-+	0x33, 0x10, 0x41, 0x12, 0x1f, 0xf3, 0xd2, 0x6b
-+};
-+static const u8 dec_nonce003[] __initconst = {
-+	0x3d, 0x86, 0xb5, 0x6b, 0xc8, 0xa3, 0x1f, 0x1d
-+};
-+static const u8 dec_key003[] __initconst = {
-+	0x2d, 0xb0, 0x5d, 0x40, 0xc8, 0xed, 0x44, 0x88,
-+	0x34, 0xd1, 0x13, 0xaf, 0x57, 0xa1, 0xeb, 0x3a,
-+	0x2a, 0x80, 0x51, 0x36, 0xec, 0x5b, 0xbc, 0x08,
-+	0x93, 0x84, 0x21, 0xb5, 0x13, 0x88, 0x3c, 0x0d
-+};
-+
-+static const u8 dec_input004[] __initconst = {
-+	0xb7, 0x1b, 0xb0, 0x73, 0x59, 0xb0, 0x84, 0xb2,
-+	0x6d, 0x8e, 0xab, 0x94, 0x31, 0xa1, 0xae, 0xac,
-+	0x89
-+};
-+static const u8 dec_output004[] __initconst = {
-+	0xa4
-+};
-+static const u8 dec_assoc004[] __initconst = {
-+	0x6a, 0xe2, 0xad, 0x3f, 0x88, 0x39, 0x5a, 0x40
-+};
-+static const u8 dec_nonce004[] __initconst = {
-+	0xd2, 0x32, 0x1f, 0x29, 0x28, 0xc6, 0xc4, 0xc4
-+};
-+static const u8 dec_key004[] __initconst = {
-+	0x4b, 0x28, 0x4b, 0xa3, 0x7b, 0xbe, 0xe9, 0xf8,
-+	0x31, 0x80, 0x82, 0xd7, 0xd8, 0xe8, 0xb5, 0xa1,
-+	0xe2, 0x18, 0x18, 0x8a, 0x9c, 0xfa, 0xa3, 0x3d,
-+	0x25, 0x71, 0x3e, 0x40, 0xbc, 0x54, 0x7a, 0x3e
-+};
-+
-+static const u8 dec_input005[] __initconst = {
-+	0xbf, 0xe1, 0x5b, 0x0b, 0xdb, 0x6b, 0xf5, 0x5e,
-+	0x6c, 0x5d, 0x84, 0x44, 0x39, 0x81, 0xc1, 0x9c,
-+	0xac
-+};
-+static const u8 dec_output005[] __initconst = {
-+	0x2d
-+};
-+static const u8 dec_assoc005[] __initconst = { };
-+static const u8 dec_nonce005[] __initconst = {
-+	0x20, 0x1c, 0xaa, 0x5f, 0x9c, 0xbf, 0x92, 0x30
-+};
-+static const u8 dec_key005[] __initconst = {
-+	0x66, 0xca, 0x9c, 0x23, 0x2a, 0x4b, 0x4b, 0x31,
-+	0x0e, 0x92, 0x89, 0x8b, 0xf4, 0x93, 0xc7, 0x87,
-+	0x98, 0xa3, 0xd8, 0x39, 0xf8, 0xf4, 0xa7, 0x01,
-+	0xc0, 0x2e, 0x0a, 0xa6, 0x7e, 0x5a, 0x78, 0x87
-+};
-+
-+static const u8 dec_input006[] __initconst = {
-+	0x8b, 0x06, 0xd3, 0x31, 0xb0, 0x93, 0x45, 0xb1,
-+	0x75, 0x6e, 0x26, 0xf9, 0x67, 0xbc, 0x90, 0x15,
-+	0x81, 0x2c, 0xb5, 0xf0, 0xc6, 0x2b, 0xc7, 0x8c,
-+	0x56, 0xd1, 0xbf, 0x69, 0x6c, 0x07, 0xa0, 0xda,
-+	0x65, 0x27, 0xc9, 0x90, 0x3d, 0xef, 0x4b, 0x11,
-+	0x0f, 0x19, 0x07, 0xfd, 0x29, 0x92, 0xd9, 0xc8,
-+	0xf7, 0x99, 0x2e, 0x4a, 0xd0, 0xb8, 0x2c, 0xdc,
-+	0x93, 0xf5, 0x9e, 0x33, 0x78, 0xd1, 0x37, 0xc3,
-+	0x66, 0xd7, 0x5e, 0xbc, 0x44, 0xbf, 0x53, 0xa5,
-+	0xbc, 0xc4, 0xcb, 0x7b, 0x3a, 0x8e, 0x7f, 0x02,
-+	0xbd, 0xbb, 0xe7, 0xca, 0xa6, 0x6c, 0x6b, 0x93,
-+	0x21, 0x93, 0x10, 0x61, 0xe7, 0x69, 0xd0, 0x78,
-+	0xf3, 0x07, 0x5a, 0x1a, 0x8f, 0x73, 0xaa, 0xb1,
-+	0x4e, 0xd3, 0xda, 0x4f, 0xf3, 0x32, 0xe1, 0x66,
-+	0x3e, 0x6c, 0xc6, 0x13, 0xba, 0x06, 0x5b, 0xfc,
-+	0x6a, 0xe5, 0x6f, 0x60, 0xfb, 0x07, 0x40, 0xb0,
-+	0x8c, 0x9d, 0x84, 0x43, 0x6b, 0xc1, 0xf7, 0x8d,
-+	0x8d, 0x31, 0xf7, 0x7a, 0x39, 0x4d, 0x8f, 0x9a,
-+	0xeb
-+};
-+static const u8 dec_output006[] __initconst = {
-+	0x33, 0x2f, 0x94, 0xc1, 0xa4, 0xef, 0xcc, 0x2a,
-+	0x5b, 0xa6, 0xe5, 0x8f, 0x1d, 0x40, 0xf0, 0x92,
-+	0x3c, 0xd9, 0x24, 0x11, 0xa9, 0x71, 0xf9, 0x37,
-+	0x14, 0x99, 0xfa, 0xbe, 0xe6, 0x80, 0xde, 0x50,
-+	0xc9, 0x96, 0xd4, 0xb0, 0xec, 0x9e, 0x17, 0xec,
-+	0xd2, 0x5e, 0x72, 0x99, 0xfc, 0x0a, 0xe1, 0xcb,
-+	0x48, 0xd2, 0x85, 0xdd, 0x2f, 0x90, 0xe0, 0x66,
-+	0x3b, 0xe6, 0x20, 0x74, 0xbe, 0x23, 0x8f, 0xcb,
-+	0xb4, 0xe4, 0xda, 0x48, 0x40, 0xa6, 0xd1, 0x1b,
-+	0xc7, 0x42, 0xce, 0x2f, 0x0c, 0xa6, 0x85, 0x6e,
-+	0x87, 0x37, 0x03, 0xb1, 0x7c, 0x25, 0x96, 0xa3,
-+	0x05, 0xd8, 0xb0, 0xf4, 0xed, 0xea, 0xc2, 0xf0,
-+	0x31, 0x98, 0x6c, 0xd1, 0x14, 0x25, 0xc0, 0xcb,
-+	0x01, 0x74, 0xd0, 0x82, 0xf4, 0x36, 0xf5, 0x41,
-+	0xd5, 0xdc, 0xca, 0xc5, 0xbb, 0x98, 0xfe, 0xfc,
-+	0x69, 0x21, 0x70, 0xd8, 0xa4, 0x4b, 0xc8, 0xde,
-+	0x8f
-+};
-+static const u8 dec_assoc006[] __initconst = {
-+	0x70, 0xd3, 0x33, 0xf3, 0x8b, 0x18, 0x0b
-+};
-+static const u8 dec_nonce006[] __initconst = {
-+	0xdf, 0x51, 0x84, 0x82, 0x42, 0x0c, 0x75, 0x9c
-+};
-+static const u8 dec_key006[] __initconst = {
-+	0x68, 0x7b, 0x8d, 0x8e, 0xe3, 0xc4, 0xdd, 0xae,
-+	0xdf, 0x72, 0x7f, 0x53, 0x72, 0x25, 0x1e, 0x78,
-+	0x91, 0xcb, 0x69, 0x76, 0x1f, 0x49, 0x93, 0xf9,
-+	0x6f, 0x21, 0xcc, 0x39, 0x9c, 0xad, 0xb1, 0x01
-+};
-+
-+static const u8 dec_input007[] __initconst = {
-+	0x85, 0x04, 0xc2, 0xed, 0x8d, 0xfd, 0x97, 0x5c,
-+	0xd2, 0xb7, 0xe2, 0xc1, 0x6b, 0xa3, 0xba, 0xf8,
-+	0xc9, 0x50, 0xc3, 0xc6, 0xa5, 0xe3, 0xa4, 0x7c,
-+	0xc3, 0x23, 0x49, 0x5e, 0xa9, 0xb9, 0x32, 0xeb,
-+	0x8a, 0x7c, 0xca, 0xe5, 0xec, 0xfb, 0x7c, 0xc0,
-+	0xcb, 0x7d, 0xdc, 0x2c, 0x9d, 0x92, 0x55, 0x21,
-+	0x0a, 0xc8, 0x43, 0x63, 0x59, 0x0a, 0x31, 0x70,
-+	0x82, 0x67, 0x41, 0x03, 0xf8, 0xdf, 0xf2, 0xac,
-+	0xa7, 0x02, 0xd4, 0xd5, 0x8a, 0x2d, 0xc8, 0x99,
-+	0x19, 0x66, 0xd0, 0xf6, 0x88, 0x2c, 0x77, 0xd9,
-+	0xd4, 0x0d, 0x6c, 0xbd, 0x98, 0xde, 0xe7, 0x7f,
-+	0xad, 0x7e, 0x8a, 0xfb, 0xe9, 0x4b, 0xe5, 0xf7,
-+	0xe5, 0x50, 0xa0, 0x90, 0x3f, 0xd6, 0x22, 0x53,
-+	0xe3, 0xfe, 0x1b, 0xcc, 0x79, 0x3b, 0xec, 0x12,
-+	0x47, 0x52, 0xa7, 0xd6, 0x04, 0xe3, 0x52, 0xe6,
-+	0x93, 0x90, 0x91, 0x32, 0x73, 0x79, 0xb8, 0xd0,
-+	0x31, 0xde, 0x1f, 0x9f, 0x2f, 0x05, 0x38, 0x54,
-+	0x2f, 0x35, 0x04, 0x39, 0xe0, 0xa7, 0xba, 0xc6,
-+	0x52, 0xf6, 0x37, 0x65, 0x4c, 0x07, 0xa9, 0x7e,
-+	0xb3, 0x21, 0x6f, 0x74, 0x8c, 0xc9, 0xde, 0xdb,
-+	0x65, 0x1b, 0x9b, 0xaa, 0x60, 0xb1, 0x03, 0x30,
-+	0x6b, 0xb2, 0x03, 0xc4, 0x1c, 0x04, 0xf8, 0x0f,
-+	0x64, 0xaf, 0x46, 0xe4, 0x65, 0x99, 0x49, 0xe2,
-+	0xea, 0xce, 0x78, 0x00, 0xd8, 0x8b, 0xd5, 0x2e,
-+	0xcf, 0xfc, 0x40, 0x49, 0xe8, 0x58, 0xdc, 0x34,
-+	0x9c, 0x8c, 0x61, 0xbf, 0x0a, 0x8e, 0xec, 0x39,
-+	0xa9, 0x30, 0x05, 0x5a, 0xd2, 0x56, 0x01, 0xc7,
-+	0xda, 0x8f, 0x4e, 0xbb, 0x43, 0xa3, 0x3a, 0xf9,
-+	0x15, 0x2a, 0xd0, 0xa0, 0x7a, 0x87, 0x34, 0x82,
-+	0xfe, 0x8a, 0xd1, 0x2d, 0x5e, 0xc7, 0xbf, 0x04,
-+	0x53, 0x5f, 0x3b, 0x36, 0xd4, 0x25, 0x5c, 0x34,
-+	0x7a, 0x8d, 0xd5, 0x05, 0xce, 0x72, 0xca, 0xef,
-+	0x7a, 0x4b, 0xbc, 0xb0, 0x10, 0x5c, 0x96, 0x42,
-+	0x3a, 0x00, 0x98, 0xcd, 0x15, 0xe8, 0xb7, 0x53
-+};
-+static const u8 dec_output007[] __initconst = {
-+	0x9b, 0x18, 0xdb, 0xdd, 0x9a, 0x0f, 0x3e, 0xa5,
-+	0x15, 0x17, 0xde, 0xdf, 0x08, 0x9d, 0x65, 0x0a,
-+	0x67, 0x30, 0x12, 0xe2, 0x34, 0x77, 0x4b, 0xc1,
-+	0xd9, 0xc6, 0x1f, 0xab, 0xc6, 0x18, 0x50, 0x17,
-+	0xa7, 0x9d, 0x3c, 0xa6, 0xc5, 0x35, 0x8c, 0x1c,
-+	0xc0, 0xa1, 0x7c, 0x9f, 0x03, 0x89, 0xca, 0xe1,
-+	0xe6, 0xe9, 0xd4, 0xd3, 0x88, 0xdb, 0xb4, 0x51,
-+	0x9d, 0xec, 0xb4, 0xfc, 0x52, 0xee, 0x6d, 0xf1,
-+	0x75, 0x42, 0xc6, 0xfd, 0xbd, 0x7a, 0x8e, 0x86,
-+	0xfc, 0x44, 0xb3, 0x4f, 0xf3, 0xea, 0x67, 0x5a,
-+	0x41, 0x13, 0xba, 0xb0, 0xdc, 0xe1, 0xd3, 0x2a,
-+	0x7c, 0x22, 0xb3, 0xca, 0xac, 0x6a, 0x37, 0x98,
-+	0x3e, 0x1d, 0x40, 0x97, 0xf7, 0x9b, 0x1d, 0x36,
-+	0x6b, 0xb3, 0x28, 0xbd, 0x60, 0x82, 0x47, 0x34,
-+	0xaa, 0x2f, 0x7d, 0xe9, 0xa8, 0x70, 0x81, 0x57,
-+	0xd4, 0xb9, 0x77, 0x0a, 0x9d, 0x29, 0xa7, 0x84,
-+	0x52, 0x4f, 0xc2, 0x4a, 0x40, 0x3b, 0x3c, 0xd4,
-+	0xc9, 0x2a, 0xdb, 0x4a, 0x53, 0xc4, 0xbe, 0x80,
-+	0xe9, 0x51, 0x7f, 0x8f, 0xc7, 0xa2, 0xce, 0x82,
-+	0x5c, 0x91, 0x1e, 0x74, 0xd9, 0xd0, 0xbd, 0xd5,
-+	0xf3, 0xfd, 0xda, 0x4d, 0x25, 0xb4, 0xbb, 0x2d,
-+	0xac, 0x2f, 0x3d, 0x71, 0x85, 0x7b, 0xcf, 0x3c,
-+	0x7b, 0x3e, 0x0e, 0x22, 0x78, 0x0c, 0x29, 0xbf,
-+	0xe4, 0xf4, 0x57, 0xb3, 0xcb, 0x49, 0xa0, 0xfc,
-+	0x1e, 0x05, 0x4e, 0x16, 0xbc, 0xd5, 0xa8, 0xa3,
-+	0xee, 0x05, 0x35, 0xc6, 0x7c, 0xab, 0x60, 0x14,
-+	0x55, 0x1a, 0x8e, 0xc5, 0x88, 0x5d, 0xd5, 0x81,
-+	0xc2, 0x81, 0xa5, 0xc4, 0x60, 0xdb, 0xaf, 0x77,
-+	0x91, 0xe1, 0xce, 0xa2, 0x7e, 0x7f, 0x42, 0xe3,
-+	0xb0, 0x13, 0x1c, 0x1f, 0x25, 0x60, 0x21, 0xe2,
-+	0x40, 0x5f, 0x99, 0xb7, 0x73, 0xec, 0x9b, 0x2b,
-+	0xf0, 0x65, 0x11, 0xc8, 0xd0, 0x0a, 0x9f, 0xd3
-+};
-+static const u8 dec_assoc007[] __initconst = { };
-+static const u8 dec_nonce007[] __initconst = {
-+	0xde, 0x7b, 0xef, 0xc3, 0x65, 0x1b, 0x68, 0xb0
-+};
-+static const u8 dec_key007[] __initconst = {
-+	0x8d, 0xb8, 0x91, 0x48, 0xf0, 0xe7, 0x0a, 0xbd,
-+	0xf9, 0x3f, 0xcd, 0xd9, 0xa0, 0x1e, 0x42, 0x4c,
-+	0xe7, 0xde, 0x25, 0x3d, 0xa3, 0xd7, 0x05, 0x80,
-+	0x8d, 0xf2, 0x82, 0xac, 0x44, 0x16, 0x51, 0x01
-+};
-+
-+static const u8 dec_input008[] __initconst = {
-+	0x14, 0xf6, 0x41, 0x37, 0xa6, 0xd4, 0x27, 0xcd,
-+	0xdb, 0x06, 0x3e, 0x9a, 0x4e, 0xab, 0xd5, 0xb1,
-+	0x1e, 0x6b, 0xd2, 0xbc, 0x11, 0xf4, 0x28, 0x93,
-+	0x63, 0x54, 0xef, 0xbb, 0x5e, 0x1d, 0x3a, 0x1d,
-+	0x37, 0x3c, 0x0a, 0x6c, 0x1e, 0xc2, 0xd1, 0x2c,
-+	0xb5, 0xa3, 0xb5, 0x7b, 0xb8, 0x8f, 0x25, 0xa6,
-+	0x1b, 0x61, 0x1c, 0xec, 0x28, 0x58, 0x26, 0xa4,
-+	0xa8, 0x33, 0x28, 0x25, 0x5c, 0x45, 0x05, 0xe5,
-+	0x6c, 0x99, 0xe5, 0x45, 0xc4, 0xa2, 0x03, 0x84,
-+	0x03, 0x73, 0x1e, 0x8c, 0x49, 0xac, 0x20, 0xdd,
-+	0x8d, 0xb3, 0xc4, 0xf5, 0xe7, 0x4f, 0xf1, 0xed,
-+	0xa1, 0x98, 0xde, 0xa4, 0x96, 0xdd, 0x2f, 0xab,
-+	0xab, 0x97, 0xcf, 0x3e, 0xd2, 0x9e, 0xb8, 0x13,
-+	0x07, 0x28, 0x29, 0x19, 0xaf, 0xfd, 0xf2, 0x49,
-+	0x43, 0xea, 0x49, 0x26, 0x91, 0xc1, 0x07, 0xd6,
-+	0xbb, 0x81, 0x75, 0x35, 0x0d, 0x24, 0x7f, 0xc8,
-+	0xda, 0xd4, 0xb7, 0xeb, 0xe8, 0x5c, 0x09, 0xa2,
-+	0x2f, 0xdc, 0x28, 0x7d, 0x3a, 0x03, 0xfa, 0x94,
-+	0xb5, 0x1d, 0x17, 0x99, 0x36, 0xc3, 0x1c, 0x18,
-+	0x34, 0xe3, 0x9f, 0xf5, 0x55, 0x7c, 0xb0, 0x60,
-+	0x9d, 0xff, 0xac, 0xd4, 0x61, 0xf2, 0xad, 0xf8,
-+	0xce, 0xc7, 0xbe, 0x5c, 0xd2, 0x95, 0xa8, 0x4b,
-+	0x77, 0x13, 0x19, 0x59, 0x26, 0xc9, 0xb7, 0x8f,
-+	0x6a, 0xcb, 0x2d, 0x37, 0x91, 0xea, 0x92, 0x9c,
-+	0x94, 0x5b, 0xda, 0x0b, 0xce, 0xfe, 0x30, 0x20,
-+	0xf8, 0x51, 0xad, 0xf2, 0xbe, 0xe7, 0xc7, 0xff,
-+	0xb3, 0x33, 0x91, 0x6a, 0xc9, 0x1a, 0x41, 0xc9,
-+	0x0f, 0xf3, 0x10, 0x0e, 0xfd, 0x53, 0xff, 0x6c,
-+	0x16, 0x52, 0xd9, 0xf3, 0xf7, 0x98, 0x2e, 0xc9,
-+	0x07, 0x31, 0x2c, 0x0c, 0x72, 0xd7, 0xc5, 0xc6,
-+	0x08, 0x2a, 0x7b, 0xda, 0xbd, 0x7e, 0x02, 0xea,
-+	0x1a, 0xbb, 0xf2, 0x04, 0x27, 0x61, 0x28, 0x8e,
-+	0xf5, 0x04, 0x03, 0x1f, 0x4c, 0x07, 0x55, 0x82,
-+	0xec, 0x1e, 0xd7, 0x8b, 0x2f, 0x65, 0x56, 0xd1,
-+	0xd9, 0x1e, 0x3c, 0xe9, 0x1f, 0x5e, 0x98, 0x70,
-+	0x38, 0x4a, 0x8c, 0x49, 0xc5, 0x43, 0xa0, 0xa1,
-+	0x8b, 0x74, 0x9d, 0x4c, 0x62, 0x0d, 0x10, 0x0c,
-+	0xf4, 0x6c, 0x8f, 0xe0, 0xaa, 0x9a, 0x8d, 0xb7,
-+	0xe0, 0xbe, 0x4c, 0x87, 0xf1, 0x98, 0x2f, 0xcc,
-+	0xed, 0xc0, 0x52, 0x29, 0xdc, 0x83, 0xf8, 0xfc,
-+	0x2c, 0x0e, 0xa8, 0x51, 0x4d, 0x80, 0x0d, 0xa3,
-+	0xfe, 0xd8, 0x37, 0xe7, 0x41, 0x24, 0xfc, 0xfb,
-+	0x75, 0xe3, 0x71, 0x7b, 0x57, 0x45, 0xf5, 0x97,
-+	0x73, 0x65, 0x63, 0x14, 0x74, 0xb8, 0x82, 0x9f,
-+	0xf8, 0x60, 0x2f, 0x8a, 0xf2, 0x4e, 0xf1, 0x39,
-+	0xda, 0x33, 0x91, 0xf8, 0x36, 0xe0, 0x8d, 0x3f,
-+	0x1f, 0x3b, 0x56, 0xdc, 0xa0, 0x8f, 0x3c, 0x9d,
-+	0x71, 0x52, 0xa7, 0xb8, 0xc0, 0xa5, 0xc6, 0xa2,
-+	0x73, 0xda, 0xf4, 0x4b, 0x74, 0x5b, 0x00, 0x3d,
-+	0x99, 0xd7, 0x96, 0xba, 0xe6, 0xe1, 0xa6, 0x96,
-+	0x38, 0xad, 0xb3, 0xc0, 0xd2, 0xba, 0x91, 0x6b,
-+	0xf9, 0x19, 0xdd, 0x3b, 0xbe, 0xbe, 0x9c, 0x20,
-+	0x50, 0xba, 0xa1, 0xd0, 0xce, 0x11, 0xbd, 0x95,
-+	0xd8, 0xd1, 0xdd, 0x33, 0x85, 0x74, 0xdc, 0xdb,
-+	0x66, 0x76, 0x44, 0xdc, 0x03, 0x74, 0x48, 0x35,
-+	0x98, 0xb1, 0x18, 0x47, 0x94, 0x7d, 0xff, 0x62,
-+	0xe4, 0x58, 0x78, 0xab, 0xed, 0x95, 0x36, 0xd9,
-+	0x84, 0x91, 0x82, 0x64, 0x41, 0xbb, 0x58, 0xe6,
-+	0x1c, 0x20, 0x6d, 0x15, 0x6b, 0x13, 0x96, 0xe8,
-+	0x35, 0x7f, 0xdc, 0x40, 0x2c, 0xe9, 0xbc, 0x8a,
-+	0x4f, 0x92, 0xec, 0x06, 0x2d, 0x50, 0xdf, 0x93,
-+	0x5d, 0x65, 0x5a, 0xa8, 0xfc, 0x20, 0x50, 0x14,
-+	0xa9, 0x8a, 0x7e, 0x1d, 0x08, 0x1f, 0xe2, 0x99,
-+	0xd0, 0xbe, 0xfb, 0x3a, 0x21, 0x9d, 0xad, 0x86,
-+	0x54, 0xfd, 0x0d, 0x98, 0x1c, 0x5a, 0x6f, 0x1f,
-+	0x9a, 0x40, 0xcd, 0xa2, 0xff, 0x6a, 0xf1, 0x54
-+};
-+static const u8 dec_output008[] __initconst = {
-+	0xc3, 0x09, 0x94, 0x62, 0xe6, 0x46, 0x2e, 0x10,
-+	0xbe, 0x00, 0xe4, 0xfc, 0xf3, 0x40, 0xa3, 0xe2,
-+	0x0f, 0xc2, 0x8b, 0x28, 0xdc, 0xba, 0xb4, 0x3c,
-+	0xe4, 0x21, 0x58, 0x61, 0xcd, 0x8b, 0xcd, 0xfb,
-+	0xac, 0x94, 0xa1, 0x45, 0xf5, 0x1c, 0xe1, 0x12,
-+	0xe0, 0x3b, 0x67, 0x21, 0x54, 0x5e, 0x8c, 0xaa,
-+	0xcf, 0xdb, 0xb4, 0x51, 0xd4, 0x13, 0xda, 0xe6,
-+	0x83, 0x89, 0xb6, 0x92, 0xe9, 0x21, 0x76, 0xa4,
-+	0x93, 0x7d, 0x0e, 0xfd, 0x96, 0x36, 0x03, 0x91,
-+	0x43, 0x5c, 0x92, 0x49, 0x62, 0x61, 0x7b, 0xeb,
-+	0x43, 0x89, 0xb8, 0x12, 0x20, 0x43, 0xd4, 0x47,
-+	0x06, 0x84, 0xee, 0x47, 0xe9, 0x8a, 0x73, 0x15,
-+	0x0f, 0x72, 0xcf, 0xed, 0xce, 0x96, 0xb2, 0x7f,
-+	0x21, 0x45, 0x76, 0xeb, 0x26, 0x28, 0x83, 0x6a,
-+	0xad, 0xaa, 0xa6, 0x81, 0xd8, 0x55, 0xb1, 0xa3,
-+	0x85, 0xb3, 0x0c, 0xdf, 0xf1, 0x69, 0x2d, 0x97,
-+	0x05, 0x2a, 0xbc, 0x7c, 0x7b, 0x25, 0xf8, 0x80,
-+	0x9d, 0x39, 0x25, 0xf3, 0x62, 0xf0, 0x66, 0x5e,
-+	0xf4, 0xa0, 0xcf, 0xd8, 0xfd, 0x4f, 0xb1, 0x1f,
-+	0x60, 0x3a, 0x08, 0x47, 0xaf, 0xe1, 0xf6, 0x10,
-+	0x77, 0x09, 0xa7, 0x27, 0x8f, 0x9a, 0x97, 0x5a,
-+	0x26, 0xfa, 0xfe, 0x41, 0x32, 0x83, 0x10, 0xe0,
-+	0x1d, 0xbf, 0x64, 0x0d, 0xf4, 0x1c, 0x32, 0x35,
-+	0xe5, 0x1b, 0x36, 0xef, 0xd4, 0x4a, 0x93, 0x4d,
-+	0x00, 0x7c, 0xec, 0x02, 0x07, 0x8b, 0x5d, 0x7d,
-+	0x1b, 0x0e, 0xd1, 0xa6, 0xa5, 0x5d, 0x7d, 0x57,
-+	0x88, 0xa8, 0xcc, 0x81, 0xb4, 0x86, 0x4e, 0xb4,
-+	0x40, 0xe9, 0x1d, 0xc3, 0xb1, 0x24, 0x3e, 0x7f,
-+	0xcc, 0x8a, 0x24, 0x9b, 0xdf, 0x6d, 0xf0, 0x39,
-+	0x69, 0x3e, 0x4c, 0xc0, 0x96, 0xe4, 0x13, 0xda,
-+	0x90, 0xda, 0xf4, 0x95, 0x66, 0x8b, 0x17, 0x17,
-+	0xfe, 0x39, 0x43, 0x25, 0xaa, 0xda, 0xa0, 0x43,
-+	0x3c, 0xb1, 0x41, 0x02, 0xa3, 0xf0, 0xa7, 0x19,
-+	0x59, 0xbc, 0x1d, 0x7d, 0x6c, 0x6d, 0x91, 0x09,
-+	0x5c, 0xb7, 0x5b, 0x01, 0xd1, 0x6f, 0x17, 0x21,
-+	0x97, 0xbf, 0x89, 0x71, 0xa5, 0xb0, 0x6e, 0x07,
-+	0x45, 0xfd, 0x9d, 0xea, 0x07, 0xf6, 0x7a, 0x9f,
-+	0x10, 0x18, 0x22, 0x30, 0x73, 0xac, 0xd4, 0x6b,
-+	0x72, 0x44, 0xed, 0xd9, 0x19, 0x9b, 0x2d, 0x4a,
-+	0x41, 0xdd, 0xd1, 0x85, 0x5e, 0x37, 0x19, 0xed,
-+	0xd2, 0x15, 0x8f, 0x5e, 0x91, 0xdb, 0x33, 0xf2,
-+	0xe4, 0xdb, 0xff, 0x98, 0xfb, 0xa3, 0xb5, 0xca,
-+	0x21, 0x69, 0x08, 0xe7, 0x8a, 0xdf, 0x90, 0xff,
-+	0x3e, 0xe9, 0x20, 0x86, 0x3c, 0xe9, 0xfc, 0x0b,
-+	0xfe, 0x5c, 0x61, 0xaa, 0x13, 0x92, 0x7f, 0x7b,
-+	0xec, 0xe0, 0x6d, 0xa8, 0x23, 0x22, 0xf6, 0x6b,
-+	0x77, 0xc4, 0xfe, 0x40, 0x07, 0x3b, 0xb6, 0xf6,
-+	0x8e, 0x5f, 0xd4, 0xb9, 0xb7, 0x0f, 0x21, 0x04,
-+	0xef, 0x83, 0x63, 0x91, 0x69, 0x40, 0xa3, 0x48,
-+	0x5c, 0xd2, 0x60, 0xf9, 0x4f, 0x6c, 0x47, 0x8b,
-+	0x3b, 0xb1, 0x9f, 0x8e, 0xee, 0x16, 0x8a, 0x13,
-+	0xfc, 0x46, 0x17, 0xc3, 0xc3, 0x32, 0x56, 0xf8,
-+	0x3c, 0x85, 0x3a, 0xb6, 0x3e, 0xaa, 0x89, 0x4f,
-+	0xb3, 0xdf, 0x38, 0xfd, 0xf1, 0xe4, 0x3a, 0xc0,
-+	0xe6, 0x58, 0xb5, 0x8f, 0xc5, 0x29, 0xa2, 0x92,
-+	0x4a, 0xb6, 0xa0, 0x34, 0x7f, 0xab, 0xb5, 0x8a,
-+	0x90, 0xa1, 0xdb, 0x4d, 0xca, 0xb6, 0x2c, 0x41,
-+	0x3c, 0xf7, 0x2b, 0x21, 0xc3, 0xfd, 0xf4, 0x17,
-+	0x5c, 0xb5, 0x33, 0x17, 0x68, 0x2b, 0x08, 0x30,
-+	0xf3, 0xf7, 0x30, 0x3c, 0x96, 0xe6, 0x6a, 0x20,
-+	0x97, 0xe7, 0x4d, 0x10, 0x5f, 0x47, 0x5f, 0x49,
-+	0x96, 0x09, 0xf0, 0x27, 0x91, 0xc8, 0xf8, 0x5a,
-+	0x2e, 0x79, 0xb5, 0xe2, 0xb8, 0xe8, 0xb9, 0x7b,
-+	0xd5, 0x10, 0xcb, 0xff, 0x5d, 0x14, 0x73, 0xf3
-+};
-+static const u8 dec_assoc008[] __initconst = { };
-+static const u8 dec_nonce008[] __initconst = {
-+	0x0e, 0x0d, 0x57, 0xbb, 0x7b, 0x40, 0x54, 0x02
-+};
-+static const u8 dec_key008[] __initconst = {
-+	0xf2, 0xaa, 0x4f, 0x99, 0xfd, 0x3e, 0xa8, 0x53,
-+	0xc1, 0x44, 0xe9, 0x81, 0x18, 0xdc, 0xf5, 0xf0,
-+	0x3e, 0x44, 0x15, 0x59, 0xe0, 0xc5, 0x44, 0x86,
-+	0xc3, 0x91, 0xa8, 0x75, 0xc0, 0x12, 0x46, 0xba
-+};
-+
-+static const u8 dec_input009[] __initconst = {
-+	0xfd, 0x81, 0x8d, 0xd0, 0x3d, 0xb4, 0xd5, 0xdf,
-+	0xd3, 0x42, 0x47, 0x5a, 0x6d, 0x19, 0x27, 0x66,
-+	0x4b, 0x2e, 0x0c, 0x27, 0x9c, 0x96, 0x4c, 0x72,
-+	0x02, 0xa3, 0x65, 0xc3, 0xb3, 0x6f, 0x2e, 0xbd,
-+	0x63, 0x8a, 0x4a, 0x5d, 0x29, 0xa2, 0xd0, 0x28,
-+	0x48, 0xc5, 0x3d, 0x98, 0xa3, 0xbc, 0xe0, 0xbe,
-+	0x3b, 0x3f, 0xe6, 0x8a, 0xa4, 0x7f, 0x53, 0x06,
-+	0xfa, 0x7f, 0x27, 0x76, 0x72, 0x31, 0xa1, 0xf5,
-+	0xd6, 0x0c, 0x52, 0x47, 0xba, 0xcd, 0x4f, 0xd7,
-+	0xeb, 0x05, 0x48, 0x0d, 0x7c, 0x35, 0x4a, 0x09,
-+	0xc9, 0x76, 0x71, 0x02, 0xa3, 0xfb, 0xb7, 0x1a,
-+	0x65, 0xb7, 0xed, 0x98, 0xc6, 0x30, 0x8a, 0x00,
-+	0xae, 0xa1, 0x31, 0xe5, 0xb5, 0x9e, 0x6d, 0x62,
-+	0xda, 0xda, 0x07, 0x0f, 0x38, 0x38, 0xd3, 0xcb,
-+	0xc1, 0xb0, 0xad, 0xec, 0x72, 0xec, 0xb1, 0xa2,
-+	0x7b, 0x59, 0xf3, 0x3d, 0x2b, 0xef, 0xcd, 0x28,
-+	0x5b, 0x83, 0xcc, 0x18, 0x91, 0x88, 0xb0, 0x2e,
-+	0xf9, 0x29, 0x31, 0x18, 0xf9, 0x4e, 0xe9, 0x0a,
-+	0x91, 0x92, 0x9f, 0xae, 0x2d, 0xad, 0xf4, 0xe6,
-+	0x1a, 0xe2, 0xa4, 0xee, 0x47, 0x15, 0xbf, 0x83,
-+	0x6e, 0xd7, 0x72, 0x12, 0x3b, 0x2d, 0x24, 0xe9,
-+	0xb2, 0x55, 0xcb, 0x3c, 0x10, 0xf0, 0x24, 0x8a,
-+	0x4a, 0x02, 0xea, 0x90, 0x25, 0xf0, 0xb4, 0x79,
-+	0x3a, 0xef, 0x6e, 0xf5, 0x52, 0xdf, 0xb0, 0x0a,
-+	0xcd, 0x24, 0x1c, 0xd3, 0x2e, 0x22, 0x74, 0xea,
-+	0x21, 0x6f, 0xe9, 0xbd, 0xc8, 0x3e, 0x36, 0x5b,
-+	0x19, 0xf1, 0xca, 0x99, 0x0a, 0xb4, 0xa7, 0x52,
-+	0x1a, 0x4e, 0xf2, 0xad, 0x8d, 0x56, 0x85, 0xbb,
-+	0x64, 0x89, 0xba, 0x26, 0xf9, 0xc7, 0xe1, 0x89,
-+	0x19, 0x22, 0x77, 0xc3, 0xa8, 0xfc, 0xff, 0xad,
-+	0xfe, 0xb9, 0x48, 0xae, 0x12, 0x30, 0x9f, 0x19,
-+	0xfb, 0x1b, 0xef, 0x14, 0x87, 0x8a, 0x78, 0x71,
-+	0xf3, 0xf4, 0xb7, 0x00, 0x9c, 0x1d, 0xb5, 0x3d,
-+	0x49, 0x00, 0x0c, 0x06, 0xd4, 0x50, 0xf9, 0x54,
-+	0x45, 0xb2, 0x5b, 0x43, 0xdb, 0x6d, 0xcf, 0x1a,
-+	0xe9, 0x7a, 0x7a, 0xcf, 0xfc, 0x8a, 0x4e, 0x4d,
-+	0x0b, 0x07, 0x63, 0x28, 0xd8, 0xe7, 0x08, 0x95,
-+	0xdf, 0xa6, 0x72, 0x93, 0x2e, 0xbb, 0xa0, 0x42,
-+	0x89, 0x16, 0xf1, 0xd9, 0x0c, 0xf9, 0xa1, 0x16,
-+	0xfd, 0xd9, 0x03, 0xb4, 0x3b, 0x8a, 0xf5, 0xf6,
-+	0xe7, 0x6b, 0x2e, 0x8e, 0x4c, 0x3d, 0xe2, 0xaf,
-+	0x08, 0x45, 0x03, 0xff, 0x09, 0xb6, 0xeb, 0x2d,
-+	0xc6, 0x1b, 0x88, 0x94, 0xac, 0x3e, 0xf1, 0x9f,
-+	0x0e, 0x0e, 0x2b, 0xd5, 0x00, 0x4d, 0x3f, 0x3b,
-+	0x53, 0xae, 0xaf, 0x1c, 0x33, 0x5f, 0x55, 0x6e,
-+	0x8d, 0xaf, 0x05, 0x7a, 0x10, 0x34, 0xc9, 0xf4,
-+	0x66, 0xcb, 0x62, 0x12, 0xa6, 0xee, 0xe8, 0x1c,
-+	0x5d, 0x12, 0x86, 0xdb, 0x6f, 0x1c, 0x33, 0xc4,
-+	0x1c, 0xda, 0x82, 0x2d, 0x3b, 0x59, 0xfe, 0xb1,
-+	0xa4, 0x59, 0x41, 0x86, 0xd0, 0xef, 0xae, 0xfb,
-+	0xda, 0x6d, 0x11, 0xb8, 0xca, 0xe9, 0x6e, 0xff,
-+	0xf7, 0xa9, 0xd9, 0x70, 0x30, 0xfc, 0x53, 0xe2,
-+	0xd7, 0xa2, 0x4e, 0xc7, 0x91, 0xd9, 0x07, 0x06,
-+	0xaa, 0xdd, 0xb0, 0x59, 0x28, 0x1d, 0x00, 0x66,
-+	0xc5, 0x54, 0xc2, 0xfc, 0x06, 0xda, 0x05, 0x90,
-+	0x52, 0x1d, 0x37, 0x66, 0xee, 0xf0, 0xb2, 0x55,
-+	0x8a, 0x5d, 0xd2, 0x38, 0x86, 0x94, 0x9b, 0xfc,
-+	0x10, 0x4c, 0xa1, 0xb9, 0x64, 0x3e, 0x44, 0xb8,
-+	0x5f, 0xb0, 0x0c, 0xec, 0xe0, 0xc9, 0xe5, 0x62,
-+	0x75, 0x3f, 0x09, 0xd5, 0xf5, 0xd9, 0x26, 0xba,
-+	0x9e, 0xd2, 0xf4, 0xb9, 0x48, 0x0a, 0xbc, 0xa2,
-+	0xd6, 0x7c, 0x36, 0x11, 0x7d, 0x26, 0x81, 0x89,
-+	0xcf, 0xa4, 0xad, 0x73, 0x0e, 0xee, 0xcc, 0x06,
-+	0xa9, 0xdb, 0xb1, 0xfd, 0xfb, 0x09, 0x7f, 0x90,
-+	0x42, 0x37, 0x2f, 0xe1, 0x9c, 0x0f, 0x6f, 0xcf,
-+	0x43, 0xb5, 0xd9, 0x90, 0xe1, 0x85, 0xf5, 0xa8,
-+	0xae
-+};
-+static const u8 dec_output009[] __initconst = {
-+	0xe6, 0xc3, 0xdb, 0x63, 0x55, 0x15, 0xe3, 0x5b,
-+	0xb7, 0x4b, 0x27, 0x8b, 0x5a, 0xdd, 0xc2, 0xe8,
-+	0x3a, 0x6b, 0xd7, 0x81, 0x96, 0x35, 0x97, 0xca,
-+	0xd7, 0x68, 0xe8, 0xef, 0xce, 0xab, 0xda, 0x09,
-+	0x6e, 0xd6, 0x8e, 0xcb, 0x55, 0xb5, 0xe1, 0xe5,
-+	0x57, 0xfd, 0xc4, 0xe3, 0xe0, 0x18, 0x4f, 0x85,
-+	0xf5, 0x3f, 0x7e, 0x4b, 0x88, 0xc9, 0x52, 0x44,
-+	0x0f, 0xea, 0xaf, 0x1f, 0x71, 0x48, 0x9f, 0x97,
-+	0x6d, 0xb9, 0x6f, 0x00, 0xa6, 0xde, 0x2b, 0x77,
-+	0x8b, 0x15, 0xad, 0x10, 0xa0, 0x2b, 0x7b, 0x41,
-+	0x90, 0x03, 0x2d, 0x69, 0xae, 0xcc, 0x77, 0x7c,
-+	0xa5, 0x9d, 0x29, 0x22, 0xc2, 0xea, 0xb4, 0x00,
-+	0x1a, 0xd2, 0x7a, 0x98, 0x8a, 0xf9, 0xf7, 0x82,
-+	0xb0, 0xab, 0xd8, 0xa6, 0x94, 0x8d, 0x58, 0x2f,
-+	0x01, 0x9e, 0x00, 0x20, 0xfc, 0x49, 0xdc, 0x0e,
-+	0x03, 0xe8, 0x45, 0x10, 0xd6, 0xa8, 0xda, 0x55,
-+	0x10, 0x9a, 0xdf, 0x67, 0x22, 0x8b, 0x43, 0xab,
-+	0x00, 0xbb, 0x02, 0xc8, 0xdd, 0x7b, 0x97, 0x17,
-+	0xd7, 0x1d, 0x9e, 0x02, 0x5e, 0x48, 0xde, 0x8e,
-+	0xcf, 0x99, 0x07, 0x95, 0x92, 0x3c, 0x5f, 0x9f,
-+	0xc5, 0x8a, 0xc0, 0x23, 0xaa, 0xd5, 0x8c, 0x82,
-+	0x6e, 0x16, 0x92, 0xb1, 0x12, 0x17, 0x07, 0xc3,
-+	0xfb, 0x36, 0xf5, 0x6c, 0x35, 0xd6, 0x06, 0x1f,
-+	0x9f, 0xa7, 0x94, 0xa2, 0x38, 0x63, 0x9c, 0xb0,
-+	0x71, 0xb3, 0xa5, 0xd2, 0xd8, 0xba, 0x9f, 0x08,
-+	0x01, 0xb3, 0xff, 0x04, 0x97, 0x73, 0x45, 0x1b,
-+	0xd5, 0xa9, 0x9c, 0x80, 0xaf, 0x04, 0x9a, 0x85,
-+	0xdb, 0x32, 0x5b, 0x5d, 0x1a, 0xc1, 0x36, 0x28,
-+	0x10, 0x79, 0xf1, 0x3c, 0xbf, 0x1a, 0x41, 0x5c,
-+	0x4e, 0xdf, 0xb2, 0x7c, 0x79, 0x3b, 0x7a, 0x62,
-+	0x3d, 0x4b, 0xc9, 0x9b, 0x2a, 0x2e, 0x7c, 0xa2,
-+	0xb1, 0x11, 0x98, 0xa7, 0x34, 0x1a, 0x00, 0xf3,
-+	0xd1, 0xbc, 0x18, 0x22, 0xba, 0x02, 0x56, 0x62,
-+	0x31, 0x10, 0x11, 0x6d, 0xe0, 0x54, 0x9d, 0x40,
-+	0x1f, 0x26, 0x80, 0x41, 0xca, 0x3f, 0x68, 0x0f,
-+	0x32, 0x1d, 0x0a, 0x8e, 0x79, 0xd8, 0xa4, 0x1b,
-+	0x29, 0x1c, 0x90, 0x8e, 0xc5, 0xe3, 0xb4, 0x91,
-+	0x37, 0x9a, 0x97, 0x86, 0x99, 0xd5, 0x09, 0xc5,
-+	0xbb, 0xa3, 0x3f, 0x21, 0x29, 0x82, 0x14, 0x5c,
-+	0xab, 0x25, 0xfb, 0xf2, 0x4f, 0x58, 0x26, 0xd4,
-+	0x83, 0xaa, 0x66, 0x89, 0x67, 0x7e, 0xc0, 0x49,
-+	0xe1, 0x11, 0x10, 0x7f, 0x7a, 0xda, 0x29, 0x04,
-+	0xff, 0xf0, 0xcb, 0x09, 0x7c, 0x9d, 0xfa, 0x03,
-+	0x6f, 0x81, 0x09, 0x31, 0x60, 0xfb, 0x08, 0xfa,
-+	0x74, 0xd3, 0x64, 0x44, 0x7c, 0x55, 0x85, 0xec,
-+	0x9c, 0x6e, 0x25, 0xb7, 0x6c, 0xc5, 0x37, 0xb6,
-+	0x83, 0x87, 0x72, 0x95, 0x8b, 0x9d, 0xe1, 0x69,
-+	0x5c, 0x31, 0x95, 0x42, 0xa6, 0x2c, 0xd1, 0x36,
-+	0x47, 0x1f, 0xec, 0x54, 0xab, 0xa2, 0x1c, 0xd8,
-+	0x00, 0xcc, 0xbc, 0x0d, 0x65, 0xe2, 0x67, 0xbf,
-+	0xbc, 0xea, 0xee, 0x9e, 0xe4, 0x36, 0x95, 0xbe,
-+	0x73, 0xd9, 0xa6, 0xd9, 0x0f, 0xa0, 0xcc, 0x82,
-+	0x76, 0x26, 0xad, 0x5b, 0x58, 0x6c, 0x4e, 0xab,
-+	0x29, 0x64, 0xd3, 0xd9, 0xa9, 0x08, 0x8c, 0x1d,
-+	0xa1, 0x4f, 0x80, 0xd8, 0x3f, 0x94, 0xfb, 0xd3,
-+	0x7b, 0xfc, 0xd1, 0x2b, 0xc3, 0x21, 0xeb, 0xe5,
-+	0x1c, 0x84, 0x23, 0x7f, 0x4b, 0xfa, 0xdb, 0x34,
-+	0x18, 0xa2, 0xc2, 0xe5, 0x13, 0xfe, 0x6c, 0x49,
-+	0x81, 0xd2, 0x73, 0xe7, 0xe2, 0xd7, 0xe4, 0x4f,
-+	0x4b, 0x08, 0x6e, 0xb1, 0x12, 0x22, 0x10, 0x9d,
-+	0xac, 0x51, 0x1e, 0x17, 0xd9, 0x8a, 0x0b, 0x42,
-+	0x88, 0x16, 0x81, 0x37, 0x7c, 0x6a, 0xf7, 0xef,
-+	0x2d, 0xe3, 0xd9, 0xf8, 0x5f, 0xe0, 0x53, 0x27,
-+	0x74, 0xb9, 0xe2, 0xd6, 0x1c, 0x80, 0x2c, 0x52,
-+	0x65
-+};
-+static const u8 dec_assoc009[] __initconst = {
-+	0x5a, 0x27, 0xff, 0xeb, 0xdf, 0x84, 0xb2, 0x9e,
-+	0xef
-+};
-+static const u8 dec_nonce009[] __initconst = {
-+	0xef, 0x2d, 0x63, 0xee, 0x6b, 0x80, 0x8b, 0x78
-+};
-+static const u8 dec_key009[] __initconst = {
-+	0xea, 0xbc, 0x56, 0x99, 0xe3, 0x50, 0xff, 0xc5,
-+	0xcc, 0x1a, 0xd7, 0xc1, 0x57, 0x72, 0xea, 0x86,
-+	0x5b, 0x89, 0x88, 0x61, 0x3d, 0x2f, 0x9b, 0xb2,
-+	0xe7, 0x9c, 0xec, 0x74, 0x6e, 0x3e, 0xf4, 0x3b
-+};
-+
-+static const u8 dec_input010[] __initconst = {
-+	0xe5, 0x26, 0xa4, 0x3d, 0xbd, 0x33, 0xd0, 0x4b,
-+	0x6f, 0x05, 0xa7, 0x6e, 0x12, 0x7a, 0xd2, 0x74,
-+	0xa6, 0xdd, 0xbd, 0x95, 0xeb, 0xf9, 0xa4, 0xf1,
-+	0x59, 0x93, 0x91, 0x70, 0xd9, 0xfe, 0x9a, 0xcd,
-+	0x53, 0x1f, 0x3a, 0xab, 0xa6, 0x7c, 0x9f, 0xa6,
-+	0x9e, 0xbd, 0x99, 0xd9, 0xb5, 0x97, 0x44, 0xd5,
-+	0x14, 0x48, 0x4d, 0x9d, 0xc0, 0xd0, 0x05, 0x96,
-+	0xeb, 0x4c, 0x78, 0x55, 0x09, 0x08, 0x01, 0x02,
-+	0x30, 0x90, 0x7b, 0x96, 0x7a, 0x7b, 0x5f, 0x30,
-+	0x41, 0x24, 0xce, 0x68, 0x61, 0x49, 0x86, 0x57,
-+	0x82, 0xdd, 0x53, 0x1c, 0x51, 0x28, 0x2b, 0x53,
-+	0x6e, 0x2d, 0xc2, 0x20, 0x4c, 0xdd, 0x8f, 0x65,
-+	0x10, 0x20, 0x50, 0xdd, 0x9d, 0x50, 0xe5, 0x71,
-+	0x40, 0x53, 0x69, 0xfc, 0x77, 0x48, 0x11, 0xb9,
-+	0xde, 0xa4, 0x8d, 0x58, 0xe4, 0xa6, 0x1a, 0x18,
-+	0x47, 0x81, 0x7e, 0xfc, 0xdd, 0xf6, 0xef, 0xce,
-+	0x2f, 0x43, 0x68, 0xd6, 0x06, 0xe2, 0x74, 0x6a,
-+	0xad, 0x90, 0xf5, 0x37, 0xf3, 0x3d, 0x82, 0x69,
-+	0x40, 0xe9, 0x6b, 0xa7, 0x3d, 0xa8, 0x1e, 0xd2,
-+	0x02, 0x7c, 0xb7, 0x9b, 0xe4, 0xda, 0x8f, 0x95,
-+	0x06, 0xc5, 0xdf, 0x73, 0xa3, 0x20, 0x9a, 0x49,
-+	0xde, 0x9c, 0xbc, 0xee, 0x14, 0x3f, 0x81, 0x5e,
-+	0xf8, 0x3b, 0x59, 0x3c, 0xe1, 0x68, 0x12, 0x5a,
-+	0x3a, 0x76, 0x3a, 0x3f, 0xf7, 0x87, 0x33, 0x0a,
-+	0x01, 0xb8, 0xd4, 0xed, 0xb6, 0xbe, 0x94, 0x5e,
-+	0x70, 0x40, 0x56, 0x67, 0x1f, 0x50, 0x44, 0x19,
-+	0xce, 0x82, 0x70, 0x10, 0x87, 0x13, 0x20, 0x0b,
-+	0x4c, 0x5a, 0xb6, 0xf6, 0xa7, 0xae, 0x81, 0x75,
-+	0x01, 0x81, 0xe6, 0x4b, 0x57, 0x7c, 0xdd, 0x6d,
-+	0xf8, 0x1c, 0x29, 0x32, 0xf7, 0xda, 0x3c, 0x2d,
-+	0xf8, 0x9b, 0x25, 0x6e, 0x00, 0xb4, 0xf7, 0x2f,
-+	0xf7, 0x04, 0xf7, 0xa1, 0x56, 0xac, 0x4f, 0x1a,
-+	0x64, 0xb8, 0x47, 0x55, 0x18, 0x7b, 0x07, 0x4d,
-+	0xbd, 0x47, 0x24, 0x80, 0x5d, 0xa2, 0x70, 0xc5,
-+	0xdd, 0x8e, 0x82, 0xd4, 0xeb, 0xec, 0xb2, 0x0c,
-+	0x39, 0xd2, 0x97, 0xc1, 0xcb, 0xeb, 0xf4, 0x77,
-+	0x59, 0xb4, 0x87, 0xef, 0xcb, 0x43, 0x2d, 0x46,
-+	0x54, 0xd1, 0xa7, 0xd7, 0x15, 0x99, 0x0a, 0x43,
-+	0xa1, 0xe0, 0x99, 0x33, 0x71, 0xc1, 0xed, 0xfe,
-+	0x72, 0x46, 0x33, 0x8e, 0x91, 0x08, 0x9f, 0xc8,
-+	0x2e, 0xca, 0xfa, 0xdc, 0x59, 0xd5, 0xc3, 0x76,
-+	0x84, 0x9f, 0xa3, 0x37, 0x68, 0xc3, 0xf0, 0x47,
-+	0x2c, 0x68, 0xdb, 0x5e, 0xc3, 0x49, 0x4c, 0xe8,
-+	0x92, 0x85, 0xe2, 0x23, 0xd3, 0x3f, 0xad, 0x32,
-+	0xe5, 0x2b, 0x82, 0xd7, 0x8f, 0x99, 0x0a, 0x59,
-+	0x5c, 0x45, 0xd9, 0xb4, 0x51, 0x52, 0xc2, 0xae,
-+	0xbf, 0x80, 0xcf, 0xc9, 0xc9, 0x51, 0x24, 0x2a,
-+	0x3b, 0x3a, 0x4d, 0xae, 0xeb, 0xbd, 0x22, 0xc3,
-+	0x0e, 0x0f, 0x59, 0x25, 0x92, 0x17, 0xe9, 0x74,
-+	0xc7, 0x8b, 0x70, 0x70, 0x36, 0x55, 0x95, 0x75,
-+	0x4b, 0xad, 0x61, 0x2b, 0x09, 0xbc, 0x82, 0xf2,
-+	0x6e, 0x94, 0x43, 0xae, 0xc3, 0xd5, 0xcd, 0x8e,
-+	0xfe, 0x5b, 0x9a, 0x88, 0x43, 0x01, 0x75, 0xb2,
-+	0x23, 0x09, 0xf7, 0x89, 0x83, 0xe7, 0xfa, 0xf9,
-+	0xb4, 0x9b, 0xf8, 0xef, 0xbd, 0x1c, 0x92, 0xc1,
-+	0xda, 0x7e, 0xfe, 0x05, 0xba, 0x5a, 0xcd, 0x07,
-+	0x6a, 0x78, 0x9e, 0x5d, 0xfb, 0x11, 0x2f, 0x79,
-+	0x38, 0xb6, 0xc2, 0x5b, 0x6b, 0x51, 0xb4, 0x71,
-+	0xdd, 0xf7, 0x2a, 0xe4, 0xf4, 0x72, 0x76, 0xad,
-+	0xc2, 0xdd, 0x64, 0x5d, 0x79, 0xb6, 0xf5, 0x7a,
-+	0x77, 0x20, 0x05, 0x3d, 0x30, 0x06, 0xd4, 0x4c,
-+	0x0a, 0x2c, 0x98, 0x5a, 0xb9, 0xd4, 0x98, 0xa9,
-+	0x3f, 0xc6, 0x12, 0xea, 0x3b, 0x4b, 0xc5, 0x79,
-+	0x64, 0x63, 0x6b, 0x09, 0x54, 0x3b, 0x14, 0x27,
-+	0xba, 0x99, 0x80, 0xc8, 0x72, 0xa8, 0x12, 0x90,
-+	0x29, 0xba, 0x40, 0x54, 0x97, 0x2b, 0x7b, 0xfe,
-+	0xeb, 0xcd, 0x01, 0x05, 0x44, 0x72, 0xdb, 0x99,
-+	0xe4, 0x61, 0xc9, 0x69, 0xd6, 0xb9, 0x28, 0xd1,
-+	0x05, 0x3e, 0xf9, 0x0b, 0x49, 0x0a, 0x49, 0xe9,
-+	0x8d, 0x0e, 0xa7, 0x4a, 0x0f, 0xaf, 0x32, 0xd0,
-+	0xe0, 0xb2, 0x3a, 0x55, 0x58, 0xfe, 0x5c, 0x28,
-+	0x70, 0x51, 0x23, 0xb0, 0x7b, 0x6a, 0x5f, 0x1e,
-+	0xb8, 0x17, 0xd7, 0x94, 0x15, 0x8f, 0xee, 0x20,
-+	0xc7, 0x42, 0x25, 0x3e, 0x9a, 0x14, 0xd7, 0x60,
-+	0x72, 0x39, 0x47, 0x48, 0xa9, 0xfe, 0xdd, 0x47,
-+	0x0a, 0xb1, 0xe6, 0x60, 0x28, 0x8c, 0x11, 0x68,
-+	0xe1, 0xff, 0xd7, 0xce, 0xc8, 0xbe, 0xb3, 0xfe,
-+	0x27, 0x30, 0x09, 0x70, 0xd7, 0xfa, 0x02, 0x33,
-+	0x3a, 0x61, 0x2e, 0xc7, 0xff, 0xa4, 0x2a, 0xa8,
-+	0x6e, 0xb4, 0x79, 0x35, 0x6d, 0x4c, 0x1e, 0x38,
-+	0xf8, 0xee, 0xd4, 0x84, 0x4e, 0x6e, 0x28, 0xa7,
-+	0xce, 0xc8, 0xc1, 0xcf, 0x80, 0x05, 0xf3, 0x04,
-+	0xef, 0xc8, 0x18, 0x28, 0x2e, 0x8d, 0x5e, 0x0c,
-+	0xdf, 0xb8, 0x5f, 0x96, 0xe8, 0xc6, 0x9c, 0x2f,
-+	0xe5, 0xa6, 0x44, 0xd7, 0xe7, 0x99, 0x44, 0x0c,
-+	0xec, 0xd7, 0x05, 0x60, 0x97, 0xbb, 0x74, 0x77,
-+	0x58, 0xd5, 0xbb, 0x48, 0xde, 0x5a, 0xb2, 0x54,
-+	0x7f, 0x0e, 0x46, 0x70, 0x6a, 0x6f, 0x78, 0xa5,
-+	0x08, 0x89, 0x05, 0x4e, 0x7e, 0xa0, 0x69, 0xb4,
-+	0x40, 0x60, 0x55, 0x77, 0x75, 0x9b, 0x19, 0xf2,
-+	0xd5, 0x13, 0x80, 0x77, 0xf9, 0x4b, 0x3f, 0x1e,
-+	0xee, 0xe6, 0x76, 0x84, 0x7b, 0x8c, 0xe5, 0x27,
-+	0xa8, 0x0a, 0x91, 0x01, 0x68, 0x71, 0x8a, 0x3f,
-+	0x06, 0xab, 0xf6, 0xa9, 0xa5, 0xe6, 0x72, 0x92,
-+	0xe4, 0x67, 0xe2, 0xa2, 0x46, 0x35, 0x84, 0x55,
-+	0x7d, 0xca, 0xa8, 0x85, 0xd0, 0xf1, 0x3f, 0xbe,
-+	0xd7, 0x34, 0x64, 0xfc, 0xae, 0xe3, 0xe4, 0x04,
-+	0x9f, 0x66, 0x02, 0xb9, 0x88, 0x10, 0xd9, 0xc4,
-+	0x4c, 0x31, 0x43, 0x7a, 0x93, 0xe2, 0x9b, 0x56,
-+	0x43, 0x84, 0xdc, 0xdc, 0xde, 0x1d, 0xa4, 0x02,
-+	0x0e, 0xc2, 0xef, 0xc3, 0xf8, 0x78, 0xd1, 0xb2,
-+	0x6b, 0x63, 0x18, 0xc9, 0xa9, 0xe5, 0x72, 0xd8,
-+	0xf3, 0xb9, 0xd1, 0x8a, 0xc7, 0x1a, 0x02, 0x27,
-+	0x20, 0x77, 0x10, 0xe5, 0xc8, 0xd4, 0x4a, 0x47,
-+	0xe5, 0xdf, 0x5f, 0x01, 0xaa, 0xb0, 0xd4, 0x10,
-+	0xbb, 0x69, 0xe3, 0x36, 0xc8, 0xe1, 0x3d, 0x43,
-+	0xfb, 0x86, 0xcd, 0xcc, 0xbf, 0xf4, 0x88, 0xe0,
-+	0x20, 0xca, 0xb7, 0x1b, 0xf1, 0x2f, 0x5c, 0xee,
-+	0xd4, 0xd3, 0xa3, 0xcc, 0xa4, 0x1e, 0x1c, 0x47,
-+	0xfb, 0xbf, 0xfc, 0xa2, 0x41, 0x55, 0x9d, 0xf6,
-+	0x5a, 0x5e, 0x65, 0x32, 0x34, 0x7b, 0x52, 0x8d,
-+	0xd5, 0xd0, 0x20, 0x60, 0x03, 0xab, 0x3f, 0x8c,
-+	0xd4, 0x21, 0xea, 0x2a, 0xd9, 0xc4, 0xd0, 0xd3,
-+	0x65, 0xd8, 0x7a, 0x13, 0x28, 0x62, 0x32, 0x4b,
-+	0x2c, 0x87, 0x93, 0xa8, 0xb4, 0x52, 0x45, 0x09,
-+	0x44, 0xec, 0xec, 0xc3, 0x17, 0xdb, 0x9a, 0x4d,
-+	0x5c, 0xa9, 0x11, 0xd4, 0x7d, 0xaf, 0x9e, 0xf1,
-+	0x2d, 0xb2, 0x66, 0xc5, 0x1d, 0xed, 0xb7, 0xcd,
-+	0x0b, 0x25, 0x5e, 0x30, 0x47, 0x3f, 0x40, 0xf4,
-+	0xa1, 0xa0, 0x00, 0x94, 0x10, 0xc5, 0x6a, 0x63,
-+	0x1a, 0xd5, 0x88, 0x92, 0x8e, 0x82, 0x39, 0x87,
-+	0x3c, 0x78, 0x65, 0x58, 0x42, 0x75, 0x5b, 0xdd,
-+	0x77, 0x3e, 0x09, 0x4e, 0x76, 0x5b, 0xe6, 0x0e,
-+	0x4d, 0x38, 0xb2, 0xc0, 0xb8, 0x95, 0x01, 0x7a,
-+	0x10, 0xe0, 0xfb, 0x07, 0xf2, 0xab, 0x2d, 0x8c,
-+	0x32, 0xed, 0x2b, 0xc0, 0x46, 0xc2, 0xf5, 0x38,
-+	0x83, 0xf0, 0x17, 0xec, 0xc1, 0x20, 0x6a, 0x9a,
-+	0x0b, 0x00, 0xa0, 0x98, 0x22, 0x50, 0x23, 0xd5,
-+	0x80, 0x6b, 0xf6, 0x1f, 0xc3, 0xcc, 0x97, 0xc9,
-+	0x24, 0x9f, 0xf3, 0xaf, 0x43, 0x14, 0xd5, 0xa0
-+};
-+static const u8 dec_output010[] __initconst = {
-+	0x42, 0x93, 0xe4, 0xeb, 0x97, 0xb0, 0x57, 0xbf,
-+	0x1a, 0x8b, 0x1f, 0xe4, 0x5f, 0x36, 0x20, 0x3c,
-+	0xef, 0x0a, 0xa9, 0x48, 0x5f, 0x5f, 0x37, 0x22,
-+	0x3a, 0xde, 0xe3, 0xae, 0xbe, 0xad, 0x07, 0xcc,
-+	0xb1, 0xf6, 0xf5, 0xf9, 0x56, 0xdd, 0xe7, 0x16,
-+	0x1e, 0x7f, 0xdf, 0x7a, 0x9e, 0x75, 0xb7, 0xc7,
-+	0xbe, 0xbe, 0x8a, 0x36, 0x04, 0xc0, 0x10, 0xf4,
-+	0x95, 0x20, 0x03, 0xec, 0xdc, 0x05, 0xa1, 0x7d,
-+	0xc4, 0xa9, 0x2c, 0x82, 0xd0, 0xbc, 0x8b, 0xc5,
-+	0xc7, 0x45, 0x50, 0xf6, 0xa2, 0x1a, 0xb5, 0x46,
-+	0x3b, 0x73, 0x02, 0xa6, 0x83, 0x4b, 0x73, 0x82,
-+	0x58, 0x5e, 0x3b, 0x65, 0x2f, 0x0e, 0xfd, 0x2b,
-+	0x59, 0x16, 0xce, 0xa1, 0x60, 0x9c, 0xe8, 0x3a,
-+	0x99, 0xed, 0x8d, 0x5a, 0xcf, 0xf6, 0x83, 0xaf,
-+	0xba, 0xd7, 0x73, 0x73, 0x40, 0x97, 0x3d, 0xca,
-+	0xef, 0x07, 0x57, 0xe6, 0xd9, 0x70, 0x0e, 0x95,
-+	0xae, 0xa6, 0x8d, 0x04, 0xcc, 0xee, 0xf7, 0x09,
-+	0x31, 0x77, 0x12, 0xa3, 0x23, 0x97, 0x62, 0xb3,
-+	0x7b, 0x32, 0xfb, 0x80, 0x14, 0x48, 0x81, 0xc3,
-+	0xe5, 0xea, 0x91, 0x39, 0x52, 0x81, 0xa2, 0x4f,
-+	0xe4, 0xb3, 0x09, 0xff, 0xde, 0x5e, 0xe9, 0x58,
-+	0x84, 0x6e, 0xf9, 0x3d, 0xdf, 0x25, 0xea, 0xad,
-+	0xae, 0xe6, 0x9a, 0xd1, 0x89, 0x55, 0xd3, 0xde,
-+	0x6c, 0x52, 0xdb, 0x70, 0xfe, 0x37, 0xce, 0x44,
-+	0x0a, 0xa8, 0x25, 0x5f, 0x92, 0xc1, 0x33, 0x4a,
-+	0x4f, 0x9b, 0x62, 0x35, 0xff, 0xce, 0xc0, 0xa9,
-+	0x60, 0xce, 0x52, 0x00, 0x97, 0x51, 0x35, 0x26,
-+	0x2e, 0xb9, 0x36, 0xa9, 0x87, 0x6e, 0x1e, 0xcc,
-+	0x91, 0x78, 0x53, 0x98, 0x86, 0x5b, 0x9c, 0x74,
-+	0x7d, 0x88, 0x33, 0xe1, 0xdf, 0x37, 0x69, 0x2b,
-+	0xbb, 0xf1, 0x4d, 0xf4, 0xd1, 0xf1, 0x39, 0x93,
-+	0x17, 0x51, 0x19, 0xe3, 0x19, 0x1e, 0x76, 0x37,
-+	0x25, 0xfb, 0x09, 0x27, 0x6a, 0xab, 0x67, 0x6f,
-+	0x14, 0x12, 0x64, 0xe7, 0xc4, 0x07, 0xdf, 0x4d,
-+	0x17, 0xbb, 0x6d, 0xe0, 0xe9, 0xb9, 0xab, 0xca,
-+	0x10, 0x68, 0xaf, 0x7e, 0xb7, 0x33, 0x54, 0x73,
-+	0x07, 0x6e, 0xf7, 0x81, 0x97, 0x9c, 0x05, 0x6f,
-+	0x84, 0x5f, 0xd2, 0x42, 0xfb, 0x38, 0xcf, 0xd1,
-+	0x2f, 0x14, 0x30, 0x88, 0x98, 0x4d, 0x5a, 0xa9,
-+	0x76, 0xd5, 0x4f, 0x3e, 0x70, 0x6c, 0x85, 0x76,
-+	0xd7, 0x01, 0xa0, 0x1a, 0xc8, 0x4e, 0xaa, 0xac,
-+	0x78, 0xfe, 0x46, 0xde, 0x6a, 0x05, 0x46, 0xa7,
-+	0x43, 0x0c, 0xb9, 0xde, 0xb9, 0x68, 0xfb, 0xce,
-+	0x42, 0x99, 0x07, 0x4d, 0x0b, 0x3b, 0x5a, 0x30,
-+	0x35, 0xa8, 0xf9, 0x3a, 0x73, 0xef, 0x0f, 0xdb,
-+	0x1e, 0x16, 0x42, 0xc4, 0xba, 0xae, 0x58, 0xaa,
-+	0xf8, 0xe5, 0x75, 0x2f, 0x1b, 0x15, 0x5c, 0xfd,
-+	0x0a, 0x97, 0xd0, 0xe4, 0x37, 0x83, 0x61, 0x5f,
-+	0x43, 0xa6, 0xc7, 0x3f, 0x38, 0x59, 0xe6, 0xeb,
-+	0xa3, 0x90, 0xc3, 0xaa, 0xaa, 0x5a, 0xd3, 0x34,
-+	0xd4, 0x17, 0xc8, 0x65, 0x3e, 0x57, 0xbc, 0x5e,
-+	0xdd, 0x9e, 0xb7, 0xf0, 0x2e, 0x5b, 0xb2, 0x1f,
-+	0x8a, 0x08, 0x0d, 0x45, 0x91, 0x0b, 0x29, 0x53,
-+	0x4f, 0x4c, 0x5a, 0x73, 0x56, 0xfe, 0xaf, 0x41,
-+	0x01, 0x39, 0x0a, 0x24, 0x3c, 0x7e, 0xbe, 0x4e,
-+	0x53, 0xf3, 0xeb, 0x06, 0x66, 0x51, 0x28, 0x1d,
-+	0xbd, 0x41, 0x0a, 0x01, 0xab, 0x16, 0x47, 0x27,
-+	0x47, 0x47, 0xf7, 0xcb, 0x46, 0x0a, 0x70, 0x9e,
-+	0x01, 0x9c, 0x09, 0xe1, 0x2a, 0x00, 0x1a, 0xd8,
-+	0xd4, 0x79, 0x9d, 0x80, 0x15, 0x8e, 0x53, 0x2a,
-+	0x65, 0x83, 0x78, 0x3e, 0x03, 0x00, 0x07, 0x12,
-+	0x1f, 0x33, 0x3e, 0x7b, 0x13, 0x37, 0xf1, 0xc3,
-+	0xef, 0xb7, 0xc1, 0x20, 0x3c, 0x3e, 0x67, 0x66,
-+	0x5d, 0x88, 0xa7, 0x7d, 0x33, 0x50, 0x77, 0xb0,
-+	0x28, 0x8e, 0xe7, 0x2c, 0x2e, 0x7a, 0xf4, 0x3c,
-+	0x8d, 0x74, 0x83, 0xaf, 0x8e, 0x87, 0x0f, 0xe4,
-+	0x50, 0xff, 0x84, 0x5c, 0x47, 0x0c, 0x6a, 0x49,
-+	0xbf, 0x42, 0x86, 0x77, 0x15, 0x48, 0xa5, 0x90,
-+	0x5d, 0x93, 0xd6, 0x2a, 0x11, 0xd5, 0xd5, 0x11,
-+	0xaa, 0xce, 0xe7, 0x6f, 0xa5, 0xb0, 0x09, 0x2c,
-+	0x8d, 0xd3, 0x92, 0xf0, 0x5a, 0x2a, 0xda, 0x5b,
-+	0x1e, 0xd5, 0x9a, 0xc4, 0xc4, 0xf3, 0x49, 0x74,
-+	0x41, 0xca, 0xe8, 0xc1, 0xf8, 0x44, 0xd6, 0x3c,
-+	0xae, 0x6c, 0x1d, 0x9a, 0x30, 0x04, 0x4d, 0x27,
-+	0x0e, 0xb1, 0x5f, 0x59, 0xa2, 0x24, 0xe8, 0xe1,
-+	0x98, 0xc5, 0x6a, 0x4c, 0xfe, 0x41, 0xd2, 0x27,
-+	0x42, 0x52, 0xe1, 0xe9, 0x7d, 0x62, 0xe4, 0x88,
-+	0x0f, 0xad, 0xb2, 0x70, 0xcb, 0x9d, 0x4c, 0x27,
-+	0x2e, 0x76, 0x1e, 0x1a, 0x63, 0x65, 0xf5, 0x3b,
-+	0xf8, 0x57, 0x69, 0xeb, 0x5b, 0x38, 0x26, 0x39,
-+	0x33, 0x25, 0x45, 0x3e, 0x91, 0xb8, 0xd8, 0xc7,
-+	0xd5, 0x42, 0xc0, 0x22, 0x31, 0x74, 0xf4, 0xbc,
-+	0x0c, 0x23, 0xf1, 0xca, 0xc1, 0x8d, 0xd7, 0xbe,
-+	0xc9, 0x62, 0xe4, 0x08, 0x1a, 0xcf, 0x36, 0xd5,
-+	0xfe, 0x55, 0x21, 0x59, 0x91, 0x87, 0x87, 0xdf,
-+	0x06, 0xdb, 0xdf, 0x96, 0x45, 0x58, 0xda, 0x05,
-+	0xcd, 0x50, 0x4d, 0xd2, 0x7d, 0x05, 0x18, 0x73,
-+	0x6a, 0x8d, 0x11, 0x85, 0xa6, 0x88, 0xe8, 0xda,
-+	0xe6, 0x30, 0x33, 0xa4, 0x89, 0x31, 0x75, 0xbe,
-+	0x69, 0x43, 0x84, 0x43, 0x50, 0x87, 0xdd, 0x71,
-+	0x36, 0x83, 0xc3, 0x78, 0x74, 0x24, 0x0a, 0xed,
-+	0x7b, 0xdb, 0xa4, 0x24, 0x0b, 0xb9, 0x7e, 0x5d,
-+	0xff, 0xde, 0xb1, 0xef, 0x61, 0x5a, 0x45, 0x33,
-+	0xf6, 0x17, 0x07, 0x08, 0x98, 0x83, 0x92, 0x0f,
-+	0x23, 0x6d, 0xe6, 0xaa, 0x17, 0x54, 0xad, 0x6a,
-+	0xc8, 0xdb, 0x26, 0xbe, 0xb8, 0xb6, 0x08, 0xfa,
-+	0x68, 0xf1, 0xd7, 0x79, 0x6f, 0x18, 0xb4, 0x9e,
-+	0x2d, 0x3f, 0x1b, 0x64, 0xaf, 0x8d, 0x06, 0x0e,
-+	0x49, 0x28, 0xe0, 0x5d, 0x45, 0x68, 0x13, 0x87,
-+	0xfa, 0xde, 0x40, 0x7b, 0xd2, 0xc3, 0x94, 0xd5,
-+	0xe1, 0xd9, 0xc2, 0xaf, 0x55, 0x89, 0xeb, 0xb4,
-+	0x12, 0x59, 0xa8, 0xd4, 0xc5, 0x29, 0x66, 0x38,
-+	0xe6, 0xac, 0x22, 0x22, 0xd9, 0x64, 0x9b, 0x34,
-+	0x0a, 0x32, 0x9f, 0xc2, 0xbf, 0x17, 0x6c, 0x3f,
-+	0x71, 0x7a, 0x38, 0x6b, 0x98, 0xfb, 0x49, 0x36,
-+	0x89, 0xc9, 0xe2, 0xd6, 0xc7, 0x5d, 0xd0, 0x69,
-+	0x5f, 0x23, 0x35, 0xc9, 0x30, 0xe2, 0xfd, 0x44,
-+	0x58, 0x39, 0xd7, 0x97, 0xfb, 0x5c, 0x00, 0xd5,
-+	0x4f, 0x7a, 0x1a, 0x95, 0x8b, 0x62, 0x4b, 0xce,
-+	0xe5, 0x91, 0x21, 0x7b, 0x30, 0x00, 0xd6, 0xdd,
-+	0x6d, 0x02, 0x86, 0x49, 0x0f, 0x3c, 0x1a, 0x27,
-+	0x3c, 0xd3, 0x0e, 0x71, 0xf2, 0xff, 0xf5, 0x2f,
-+	0x87, 0xac, 0x67, 0x59, 0x81, 0xa3, 0xf7, 0xf8,
-+	0xd6, 0x11, 0x0c, 0x84, 0xa9, 0x03, 0xee, 0x2a,
-+	0xc4, 0xf3, 0x22, 0xab, 0x7c, 0xe2, 0x25, 0xf5,
-+	0x67, 0xa3, 0xe4, 0x11, 0xe0, 0x59, 0xb3, 0xca,
-+	0x87, 0xa0, 0xae, 0xc9, 0xa6, 0x62, 0x1b, 0x6e,
-+	0x4d, 0x02, 0x6b, 0x07, 0x9d, 0xfd, 0xd0, 0x92,
-+	0x06, 0xe1, 0xb2, 0x9a, 0x4a, 0x1f, 0x1f, 0x13,
-+	0x49, 0x99, 0x97, 0x08, 0xde, 0x7f, 0x98, 0xaf,
-+	0x51, 0x98, 0xee, 0x2c, 0xcb, 0xf0, 0x0b, 0xc6,
-+	0xb6, 0xb7, 0x2d, 0x9a, 0xb1, 0xac, 0xa6, 0xe3,
-+	0x15, 0x77, 0x9d, 0x6b, 0x1a, 0xe4, 0xfc, 0x8b,
-+	0xf2, 0x17, 0x59, 0x08, 0x04, 0x58, 0x81, 0x9d,
-+	0x1b, 0x1b, 0x69, 0x55, 0xc2, 0xb4, 0x3c, 0x1f,
-+	0x50, 0xf1, 0x7f, 0x77, 0x90, 0x4c, 0x66, 0x40,
-+	0x5a, 0xc0, 0x33, 0x1f, 0xcb, 0x05, 0x6d, 0x5c,
-+	0x06, 0x87, 0x52, 0xa2, 0x8f, 0x26, 0xd5, 0x4f
-+};
-+static const u8 dec_assoc010[] __initconst = {
-+	0xd2, 0xa1, 0x70, 0xdb, 0x7a, 0xf8, 0xfa, 0x27,
-+	0xba, 0x73, 0x0f, 0xbf, 0x3d, 0x1e, 0x82, 0xb2
-+};
-+static const u8 dec_nonce010[] __initconst = {
-+	0xdb, 0x92, 0x0f, 0x7f, 0x17, 0x54, 0x0c, 0x30
-+};
-+static const u8 dec_key010[] __initconst = {
-+	0x47, 0x11, 0xeb, 0x86, 0x2b, 0x2c, 0xab, 0x44,
-+	0x34, 0xda, 0x7f, 0x57, 0x03, 0x39, 0x0c, 0xaf,
-+	0x2c, 0x14, 0xfd, 0x65, 0x23, 0xe9, 0x8e, 0x74,
-+	0xd5, 0x08, 0x68, 0x08, 0xe7, 0xb4, 0x72, 0xd7
-+};
-+
-+static const u8 dec_input011[] __initconst = {
-+	0x6a, 0xfc, 0x4b, 0x25, 0xdf, 0xc0, 0xe4, 0xe8,
-+	0x17, 0x4d, 0x4c, 0xc9, 0x7e, 0xde, 0x3a, 0xcc,
-+	0x3c, 0xba, 0x6a, 0x77, 0x47, 0xdb, 0xe3, 0x74,
-+	0x7a, 0x4d, 0x5f, 0x8d, 0x37, 0x55, 0x80, 0x73,
-+	0x90, 0x66, 0x5d, 0x3a, 0x7d, 0x5d, 0x86, 0x5e,
-+	0x8d, 0xfd, 0x83, 0xff, 0x4e, 0x74, 0x6f, 0xf9,
-+	0xe6, 0x70, 0x17, 0x70, 0x3e, 0x96, 0xa7, 0x7e,
-+	0xcb, 0xab, 0x8f, 0x58, 0x24, 0x9b, 0x01, 0xfd,
-+	0xcb, 0xe6, 0x4d, 0x9b, 0xf0, 0x88, 0x94, 0x57,
-+	0x66, 0xef, 0x72, 0x4c, 0x42, 0x6e, 0x16, 0x19,
-+	0x15, 0xea, 0x70, 0x5b, 0xac, 0x13, 0xdb, 0x9f,
-+	0x18, 0xe2, 0x3c, 0x26, 0x97, 0xbc, 0xdc, 0x45,
-+	0x8c, 0x6c, 0x24, 0x69, 0x9c, 0xf7, 0x65, 0x1e,
-+	0x18, 0x59, 0x31, 0x7c, 0xe4, 0x73, 0xbc, 0x39,
-+	0x62, 0xc6, 0x5c, 0x9f, 0xbf, 0xfa, 0x90, 0x03,
-+	0xc9, 0x72, 0x26, 0xb6, 0x1b, 0xc2, 0xb7, 0x3f,
-+	0xf2, 0x13, 0x77, 0xf2, 0x8d, 0xb9, 0x47, 0xd0,
-+	0x53, 0xdd, 0xc8, 0x91, 0x83, 0x8b, 0xb1, 0xce,
-+	0xa3, 0xfe, 0xcd, 0xd9, 0xdd, 0x92, 0x7b, 0xdb,
-+	0xb8, 0xfb, 0xc9, 0x2d, 0x01, 0x59, 0x39, 0x52,
-+	0xad, 0x1b, 0xec, 0xcf, 0xd7, 0x70, 0x13, 0x21,
-+	0xf5, 0x47, 0xaa, 0x18, 0x21, 0x5c, 0xc9, 0x9a,
-+	0xd2, 0x6b, 0x05, 0x9c, 0x01, 0xa1, 0xda, 0x35,
-+	0x5d, 0xb3, 0x70, 0xe6, 0xa9, 0x80, 0x8b, 0x91,
-+	0xb7, 0xb3, 0x5f, 0x24, 0x9a, 0xb7, 0xd1, 0x6b,
-+	0xa1, 0x1c, 0x50, 0xba, 0x49, 0xe0, 0xee, 0x2e,
-+	0x75, 0xac, 0x69, 0xc0, 0xeb, 0x03, 0xdd, 0x19,
-+	0xe5, 0xf6, 0x06, 0xdd, 0xc3, 0xd7, 0x2b, 0x07,
-+	0x07, 0x30, 0xa7, 0x19, 0x0c, 0xbf, 0xe6, 0x18,
-+	0xcc, 0xb1, 0x01, 0x11, 0x85, 0x77, 0x1d, 0x96,
-+	0xa7, 0xa3, 0x00, 0x84, 0x02, 0xa2, 0x83, 0x68,
-+	0xda, 0x17, 0x27, 0xc8, 0x7f, 0x23, 0xb7, 0xf4,
-+	0x13, 0x85, 0xcf, 0xdd, 0x7a, 0x7d, 0x24, 0x57,
-+	0xfe, 0x05, 0x93, 0xf5, 0x74, 0xce, 0xed, 0x0c,
-+	0x20, 0x98, 0x8d, 0x92, 0x30, 0xa1, 0x29, 0x23,
-+	0x1a, 0xa0, 0x4f, 0x69, 0x56, 0x4c, 0xe1, 0xc8,
-+	0xce, 0xf6, 0x9a, 0x0c, 0xa4, 0xfa, 0x04, 0xf6,
-+	0x62, 0x95, 0xf2, 0xfa, 0xc7, 0x40, 0x68, 0x40,
-+	0x8f, 0x41, 0xda, 0xb4, 0x26, 0x6f, 0x70, 0xab,
-+	0x40, 0x61, 0xa4, 0x0e, 0x75, 0xfb, 0x86, 0xeb,
-+	0x9d, 0x9a, 0x1f, 0xec, 0x76, 0x99, 0xe7, 0xea,
-+	0xaa, 0x1e, 0x2d, 0xb5, 0xd4, 0xa6, 0x1a, 0xb8,
-+	0x61, 0x0a, 0x1d, 0x16, 0x5b, 0x98, 0xc2, 0x31,
-+	0x40, 0xe7, 0x23, 0x1d, 0x66, 0x99, 0xc8, 0xc0,
-+	0xd7, 0xce, 0xf3, 0x57, 0x40, 0x04, 0x3f, 0xfc,
-+	0xea, 0xb3, 0xfc, 0xd2, 0xd3, 0x99, 0xa4, 0x94,
-+	0x69, 0xa0, 0xef, 0xd1, 0x85, 0xb3, 0xa6, 0xb1,
-+	0x28, 0xbf, 0x94, 0x67, 0x22, 0xc3, 0x36, 0x46,
-+	0xf8, 0xd2, 0x0f, 0x5f, 0xf4, 0x59, 0x80, 0xe6,
-+	0x2d, 0x43, 0x08, 0x7d, 0x19, 0x09, 0x97, 0xa7,
-+	0x4c, 0x3d, 0x8d, 0xba, 0x65, 0x62, 0xa3, 0x71,
-+	0x33, 0x29, 0x62, 0xdb, 0xc1, 0x33, 0x34, 0x1a,
-+	0x63, 0x33, 0x16, 0xb6, 0x64, 0x7e, 0xab, 0x33,
-+	0xf0, 0xe6, 0x26, 0x68, 0xba, 0x1d, 0x2e, 0x38,
-+	0x08, 0xe6, 0x02, 0xd3, 0x25, 0x2c, 0x47, 0x23,
-+	0x58, 0x34, 0x0f, 0x9d, 0x63, 0x4f, 0x63, 0xbb,
-+	0x7f, 0x3b, 0x34, 0x38, 0xa7, 0xb5, 0x8d, 0x65,
-+	0xd9, 0x9f, 0x79, 0x55, 0x3e, 0x4d, 0xe7, 0x73,
-+	0xd8, 0xf6, 0x98, 0x97, 0x84, 0x60, 0x9c, 0xc8,
-+	0xa9, 0x3c, 0xf6, 0xdc, 0x12, 0x5c, 0xe1, 0xbb,
-+	0x0b, 0x8b, 0x98, 0x9c, 0x9d, 0x26, 0x7c, 0x4a,
-+	0xe6, 0x46, 0x36, 0x58, 0x21, 0x4a, 0xee, 0xca,
-+	0xd7, 0x3b, 0xc2, 0x6c, 0x49, 0x2f, 0xe5, 0xd5,
-+	0x03, 0x59, 0x84, 0x53, 0xcb, 0xfe, 0x92, 0x71,
-+	0x2e, 0x7c, 0x21, 0xcc, 0x99, 0x85, 0x7f, 0xb8,
-+	0x74, 0x90, 0x13, 0x42, 0x3f, 0xe0, 0x6b, 0x1d,
-+	0xf2, 0x4d, 0x54, 0xd4, 0xfc, 0x3a, 0x05, 0xe6,
-+	0x74, 0xaf, 0xa6, 0xa0, 0x2a, 0x20, 0x23, 0x5d,
-+	0x34, 0x5c, 0xd9, 0x3e, 0x4e, 0xfa, 0x93, 0xe7,
-+	0xaa, 0xe9, 0x6f, 0x08, 0x43, 0x67, 0x41, 0xc5,
-+	0xad, 0xfb, 0x31, 0x95, 0x82, 0x73, 0x32, 0xd8,
-+	0xa6, 0xa3, 0xed, 0x0e, 0x2d, 0xf6, 0x5f, 0xfd,
-+	0x80, 0xa6, 0x7a, 0xe0, 0xdf, 0x78, 0x15, 0x29,
-+	0x74, 0x33, 0xd0, 0x9e, 0x83, 0x86, 0x72, 0x22,
-+	0x57, 0x29, 0xb9, 0x9e, 0x5d, 0xd3, 0x1a, 0xb5,
-+	0x96, 0x72, 0x41, 0x3d, 0xf1, 0x64, 0x43, 0x67,
-+	0xee, 0xaa, 0x5c, 0xd3, 0x9a, 0x96, 0x13, 0x11,
-+	0x5d, 0xf3, 0x0c, 0x87, 0x82, 0x1e, 0x41, 0x9e,
-+	0xd0, 0x27, 0xd7, 0x54, 0x3b, 0x67, 0x73, 0x09,
-+	0x91, 0xe9, 0xd5, 0x36, 0xa7, 0xb5, 0x55, 0xe4,
-+	0xf3, 0x21, 0x51, 0x49, 0x22, 0x07, 0x55, 0x4f,
-+	0x44, 0x4b, 0xd2, 0x15, 0x93, 0x17, 0x2a, 0xfa,
-+	0x4d, 0x4a, 0x57, 0xdb, 0x4c, 0xa6, 0xeb, 0xec,
-+	0x53, 0x25, 0x6c, 0x21, 0xed, 0x00, 0x4c, 0x3b,
-+	0xca, 0x14, 0x57, 0xa9, 0xd6, 0x6a, 0xcd, 0x8d,
-+	0x5e, 0x74, 0xac, 0x72, 0xc1, 0x97, 0xe5, 0x1b,
-+	0x45, 0x4e, 0xda, 0xfc, 0xcc, 0x40, 0xe8, 0x48,
-+	0x88, 0x0b, 0xa3, 0xe3, 0x8d, 0x83, 0x42, 0xc3,
-+	0x23, 0xfd, 0x68, 0xb5, 0x8e, 0xf1, 0x9d, 0x63,
-+	0x77, 0xe9, 0xa3, 0x8e, 0x8c, 0x26, 0x6b, 0xbd,
-+	0x72, 0x73, 0x35, 0x0c, 0x03, 0xf8, 0x43, 0x78,
-+	0x52, 0x71, 0x15, 0x1f, 0x71, 0x5d, 0x6e, 0xed,
-+	0xb9, 0xcc, 0x86, 0x30, 0xdb, 0x2b, 0xd3, 0x82,
-+	0x88, 0x23, 0x71, 0x90, 0x53, 0x5c, 0xa9, 0x2f,
-+	0x76, 0x01, 0xb7, 0x9a, 0xfe, 0x43, 0x55, 0xa3,
-+	0x04, 0x9b, 0x0e, 0xe4, 0x59, 0xdf, 0xc9, 0xe9,
-+	0xb1, 0xea, 0x29, 0x28, 0x3c, 0x5c, 0xae, 0x72,
-+	0x84, 0xb6, 0xc6, 0xeb, 0x0c, 0x27, 0x07, 0x74,
-+	0x90, 0x0d, 0x31, 0xb0, 0x00, 0x77, 0xe9, 0x40,
-+	0x70, 0x6f, 0x68, 0xa7, 0xfd, 0x06, 0xec, 0x4b,
-+	0xc0, 0xb7, 0xac, 0xbc, 0x33, 0xb7, 0x6d, 0x0a,
-+	0xbd, 0x12, 0x1b, 0x59, 0xcb, 0xdd, 0x32, 0xf5,
-+	0x1d, 0x94, 0x57, 0x76, 0x9e, 0x0c, 0x18, 0x98,
-+	0x71, 0xd7, 0x2a, 0xdb, 0x0b, 0x7b, 0xa7, 0x71,
-+	0xb7, 0x67, 0x81, 0x23, 0x96, 0xae, 0xb9, 0x7e,
-+	0x32, 0x43, 0x92, 0x8a, 0x19, 0xa0, 0xc4, 0xd4,
-+	0x3b, 0x57, 0xf9, 0x4a, 0x2c, 0xfb, 0x51, 0x46,
-+	0xbb, 0xcb, 0x5d, 0xb3, 0xef, 0x13, 0x93, 0x6e,
-+	0x68, 0x42, 0x54, 0x57, 0xd3, 0x6a, 0x3a, 0x8f,
-+	0x9d, 0x66, 0xbf, 0xbd, 0x36, 0x23, 0xf5, 0x93,
-+	0x83, 0x7b, 0x9c, 0xc0, 0xdd, 0xc5, 0x49, 0xc0,
-+	0x64, 0xed, 0x07, 0x12, 0xb3, 0xe6, 0xe4, 0xe5,
-+	0x38, 0x95, 0x23, 0xb1, 0xa0, 0x3b, 0x1a, 0x61,
-+	0xda, 0x17, 0xac, 0xc3, 0x58, 0xdd, 0x74, 0x64,
-+	0x22, 0x11, 0xe8, 0x32, 0x1d, 0x16, 0x93, 0x85,
-+	0x99, 0xa5, 0x9c, 0x34, 0x55, 0xb1, 0xe9, 0x20,
-+	0x72, 0xc9, 0x28, 0x7b, 0x79, 0x00, 0xa1, 0xa6,
-+	0xa3, 0x27, 0x40, 0x18, 0x8a, 0x54, 0xe0, 0xcc,
-+	0xe8, 0x4e, 0x8e, 0x43, 0x96, 0xe7, 0x3f, 0xc8,
-+	0xe9, 0xb2, 0xf9, 0xc9, 0xda, 0x04, 0x71, 0x50,
-+	0x47, 0xe4, 0xaa, 0xce, 0xa2, 0x30, 0xc8, 0xe4,
-+	0xac, 0xc7, 0x0d, 0x06, 0x2e, 0xe6, 0xe8, 0x80,
-+	0x36, 0x29, 0x9e, 0x01, 0xb8, 0xc3, 0xf0, 0xa0,
-+	0x5d, 0x7a, 0xca, 0x4d, 0xa0, 0x57, 0xbd, 0x2a,
-+	0x45, 0xa7, 0x7f, 0x9c, 0x93, 0x07, 0x8f, 0x35,
-+	0x67, 0x92, 0xe3, 0xe9, 0x7f, 0xa8, 0x61, 0x43,
-+	0x9e, 0x25, 0x4f, 0x33, 0x76, 0x13, 0x6e, 0x12,
-+	0xb9, 0xdd, 0xa4, 0x7c, 0x08, 0x9f, 0x7c, 0xe7,
-+	0x0a, 0x8d, 0x84, 0x06, 0xa4, 0x33, 0x17, 0x34,
-+	0x5e, 0x10, 0x7c, 0xc0, 0xa8, 0x3d, 0x1f, 0x42,
-+	0x20, 0x51, 0x65, 0x5d, 0x09, 0xc3, 0xaa, 0xc0,
-+	0xc8, 0x0d, 0xf0, 0x79, 0xbc, 0x20, 0x1b, 0x95,
-+	0xe7, 0x06, 0x7d, 0x47, 0x20, 0x03, 0x1a, 0x74,
-+	0xdd, 0xe2, 0xd4, 0xae, 0x38, 0x71, 0x9b, 0xf5,
-+	0x80, 0xec, 0x08, 0x4e, 0x56, 0xba, 0x76, 0x12,
-+	0x1a, 0xdf, 0x48, 0xf3, 0xae, 0xb3, 0xe6, 0xe6,
-+	0xbe, 0xc0, 0x91, 0x2e, 0x01, 0xb3, 0x01, 0x86,
-+	0xa2, 0xb9, 0x52, 0xd1, 0x21, 0xae, 0xd4, 0x97,
-+	0x1d, 0xef, 0x41, 0x12, 0x95, 0x3d, 0x48, 0x45,
-+	0x1c, 0x56, 0x32, 0x8f, 0xb8, 0x43, 0xbb, 0x19,
-+	0xf3, 0xca, 0xe9, 0xeb, 0x6d, 0x84, 0xbe, 0x86,
-+	0x06, 0xe2, 0x36, 0xb2, 0x62, 0x9d, 0xd3, 0x4c,
-+	0x48, 0x18, 0x54, 0x13, 0x4e, 0xcf, 0xfd, 0xba,
-+	0x84, 0xb9, 0x30, 0x53, 0xcf, 0xfb, 0xb9, 0x29,
-+	0x8f, 0xdc, 0x9f, 0xef, 0x60, 0x0b, 0x64, 0xf6,
-+	0x8b, 0xee, 0xa6, 0x91, 0xc2, 0x41, 0x6c, 0xf6,
-+	0xfa, 0x79, 0x67, 0x4b, 0xc1, 0x3f, 0xaf, 0x09,
-+	0x81, 0xd4, 0x5d, 0xcb, 0x09, 0xdf, 0x36, 0x31,
-+	0xc0, 0x14, 0x3c, 0x7c, 0x0e, 0x65, 0x95, 0x99,
-+	0x6d, 0xa3, 0xf4, 0xd7, 0x38, 0xee, 0x1a, 0x2b,
-+	0x37, 0xe2, 0xa4, 0x3b, 0x4b, 0xd0, 0x65, 0xca,
-+	0xf8, 0xc3, 0xe8, 0x15, 0x20, 0xef, 0xf2, 0x00,
-+	0xfd, 0x01, 0x09, 0xc5, 0xc8, 0x17, 0x04, 0x93,
-+	0xd0, 0x93, 0x03, 0x55, 0xc5, 0xfe, 0x32, 0xa3,
-+	0x3e, 0x28, 0x2d, 0x3b, 0x93, 0x8a, 0xcc, 0x07,
-+	0x72, 0x80, 0x8b, 0x74, 0x16, 0x24, 0xbb, 0xda,
-+	0x94, 0x39, 0x30, 0x8f, 0xb1, 0xcd, 0x4a, 0x90,
-+	0x92, 0x7c, 0x14, 0x8f, 0x95, 0x4e, 0xac, 0x9b,
-+	0xd8, 0x8f, 0x1a, 0x87, 0xa4, 0x32, 0x27, 0x8a,
-+	0xba, 0xf7, 0x41, 0xcf, 0x84, 0x37, 0x19, 0xe6,
-+	0x06, 0xf5, 0x0e, 0xcf, 0x36, 0xf5, 0x9e, 0x6c,
-+	0xde, 0xbc, 0xff, 0x64, 0x7e, 0x4e, 0x59, 0x57,
-+	0x48, 0xfe, 0x14, 0xf7, 0x9c, 0x93, 0x5d, 0x15,
-+	0xad, 0xcc, 0x11, 0xb1, 0x17, 0x18, 0xb2, 0x7e,
-+	0xcc, 0xab, 0xe9, 0xce, 0x7d, 0x77, 0x5b, 0x51,
-+	0x1b, 0x1e, 0x20, 0xa8, 0x32, 0x06, 0x0e, 0x75,
-+	0x93, 0xac, 0xdb, 0x35, 0x37, 0x1f, 0xe9, 0x19,
-+	0x1d, 0xb4, 0x71, 0x97, 0xd6, 0x4e, 0x2c, 0x08,
-+	0xa5, 0x13, 0xf9, 0x0e, 0x7e, 0x78, 0x6e, 0x14,
-+	0xe0, 0xa9, 0xb9, 0x96, 0x4c, 0x80, 0x82, 0xba,
-+	0x17, 0xb3, 0x9d, 0x69, 0xb0, 0x84, 0x46, 0xff,
-+	0xf9, 0x52, 0x79, 0x94, 0x58, 0x3a, 0x62, 0x90,
-+	0x15, 0x35, 0x71, 0x10, 0x37, 0xed, 0xa1, 0x8e,
-+	0x53, 0x6e, 0xf4, 0x26, 0x57, 0x93, 0x15, 0x93,
-+	0xf6, 0x81, 0x2c, 0x5a, 0x10, 0xda, 0x92, 0xad,
-+	0x2f, 0xdb, 0x28, 0x31, 0x2d, 0x55, 0x04, 0xd2,
-+	0x06, 0x28, 0x8c, 0x1e, 0xdc, 0xea, 0x54, 0xac,
-+	0xff, 0xb7, 0x6c, 0x30, 0x15, 0xd4, 0xb4, 0x0d,
-+	0x00, 0x93, 0x57, 0xdd, 0xd2, 0x07, 0x07, 0x06,
-+	0xd9, 0x43, 0x9b, 0xcd, 0x3a, 0xf4, 0x7d, 0x4c,
-+	0x36, 0x5d, 0x23, 0xa2, 0xcc, 0x57, 0x40, 0x91,
-+	0xe9, 0x2c, 0x2f, 0x2c, 0xd5, 0x30, 0x9b, 0x17,
-+	0xb0, 0xc9, 0xf7, 0xa7, 0x2f, 0xd1, 0x93, 0x20,
-+	0x6b, 0xc6, 0xc1, 0xe4, 0x6f, 0xcb, 0xd1, 0xe7,
-+	0x09, 0x0f, 0x9e, 0xdc, 0xaa, 0x9f, 0x2f, 0xdf,
-+	0x56, 0x9f, 0xd4, 0x33, 0x04, 0xaf, 0xd3, 0x6c,
-+	0x58, 0x61, 0xf0, 0x30, 0xec, 0xf2, 0x7f, 0xf2,
-+	0x9c, 0xdf, 0x39, 0xbb, 0x6f, 0xa2, 0x8c, 0x7e,
-+	0xc4, 0x22, 0x51, 0x71, 0xc0, 0x4d, 0x14, 0x1a,
-+	0xc4, 0xcd, 0x04, 0xd9, 0x87, 0x08, 0x50, 0x05,
-+	0xcc, 0xaf, 0xf6, 0xf0, 0x8f, 0x92, 0x54, 0x58,
-+	0xc2, 0xc7, 0x09, 0x7a, 0x59, 0x02, 0x05, 0xe8,
-+	0xb0, 0x86, 0xd9, 0xbf, 0x7b, 0x35, 0x51, 0x4d,
-+	0xaf, 0x08, 0x97, 0x2c, 0x65, 0xda, 0x2a, 0x71,
-+	0x3a, 0xa8, 0x51, 0xcc, 0xf2, 0x73, 0x27, 0xc3,
-+	0xfd, 0x62, 0xcf, 0xe3, 0xb2, 0xca, 0xcb, 0xbe,
-+	0x1a, 0x0a, 0xa1, 0x34, 0x7b, 0x77, 0xc4, 0x62,
-+	0x68, 0x78, 0x5f, 0x94, 0x07, 0x04, 0x65, 0x16,
-+	0x4b, 0x61, 0xcb, 0xff, 0x75, 0x26, 0x50, 0x66,
-+	0x1f, 0x6e, 0x93, 0xf8, 0xc5, 0x51, 0xeb, 0xa4,
-+	0x4a, 0x48, 0x68, 0x6b, 0xe2, 0x5e, 0x44, 0xb2,
-+	0x50, 0x2c, 0x6c, 0xae, 0x79, 0x4e, 0x66, 0x35,
-+	0x81, 0x50, 0xac, 0xbc, 0x3f, 0xb1, 0x0c, 0xf3,
-+	0x05, 0x3c, 0x4a, 0xa3, 0x6c, 0x2a, 0x79, 0xb4,
-+	0xb7, 0xab, 0xca, 0xc7, 0x9b, 0x8e, 0xcd, 0x5f,
-+	0x11, 0x03, 0xcb, 0x30, 0xa3, 0xab, 0xda, 0xfe,
-+	0x64, 0xb9, 0xbb, 0xd8, 0x5e, 0x3a, 0x1a, 0x56,
-+	0xe5, 0x05, 0x48, 0x90, 0x1e, 0x61, 0x69, 0x1b,
-+	0x22, 0xe6, 0x1a, 0x3c, 0x75, 0xad, 0x1f, 0x37,
-+	0x28, 0xdc, 0xe4, 0x6d, 0xbd, 0x42, 0xdc, 0xd3,
-+	0xc8, 0xb6, 0x1c, 0x48, 0xfe, 0x94, 0x77, 0x7f,
-+	0xbd, 0x62, 0xac, 0xa3, 0x47, 0x27, 0xcf, 0x5f,
-+	0xd9, 0xdb, 0xaf, 0xec, 0xf7, 0x5e, 0xc1, 0xb0,
-+	0x9d, 0x01, 0x26, 0x99, 0x7e, 0x8f, 0x03, 0x70,
-+	0xb5, 0x42, 0xbe, 0x67, 0x28, 0x1b, 0x7c, 0xbd,
-+	0x61, 0x21, 0x97, 0xcc, 0x5c, 0xe1, 0x97, 0x8f,
-+	0x8d, 0xde, 0x2b, 0xaa, 0xa7, 0x71, 0x1d, 0x1e,
-+	0x02, 0x73, 0x70, 0x58, 0x32, 0x5b, 0x1d, 0x67,
-+	0x3d, 0xe0, 0x74, 0x4f, 0x03, 0xf2, 0x70, 0x51,
-+	0x79, 0xf1, 0x61, 0x70, 0x15, 0x74, 0x9d, 0x23,
-+	0x89, 0xde, 0xac, 0xfd, 0xde, 0xd0, 0x1f, 0xc3,
-+	0x87, 0x44, 0x35, 0x4b, 0xe5, 0xb0, 0x60, 0xc5,
-+	0x22, 0xe4, 0x9e, 0xca, 0xeb, 0xd5, 0x3a, 0x09,
-+	0x45, 0xa4, 0xdb, 0xfa, 0x3f, 0xeb, 0x1b, 0xc7,
-+	0xc8, 0x14, 0x99, 0x51, 0x92, 0x10, 0xed, 0xed,
-+	0x28, 0xe0, 0xa1, 0xf8, 0x26, 0xcf, 0xcd, 0xcb,
-+	0x63, 0xa1, 0x3b, 0xe3, 0xdf, 0x7e, 0xfe, 0xa6,
-+	0xf0, 0x81, 0x9a, 0xbf, 0x55, 0xde, 0x54, 0xd5,
-+	0x56, 0x60, 0x98, 0x10, 0x68, 0xf4, 0x38, 0x96,
-+	0x8e, 0x6f, 0x1d, 0x44, 0x7f, 0xd6, 0x2f, 0xfe,
-+	0x55, 0xfb, 0x0c, 0x7e, 0x67, 0xe2, 0x61, 0x44,
-+	0xed, 0xf2, 0x35, 0x30, 0x5d, 0xe9, 0xc7, 0xd6,
-+	0x6d, 0xe0, 0xa0, 0xed, 0xf3, 0xfc, 0xd8, 0x3e,
-+	0x0a, 0x7b, 0xcd, 0xaf, 0x65, 0x68, 0x18, 0xc0,
-+	0xec, 0x04, 0x1c, 0x74, 0x6d, 0xe2, 0x6e, 0x79,
-+	0xd4, 0x11, 0x2b, 0x62, 0xd5, 0x27, 0xad, 0x4f,
-+	0x01, 0x59, 0x73, 0xcc, 0x6a, 0x53, 0xfb, 0x2d,
-+	0xd5, 0x4e, 0x99, 0x21, 0x65, 0x4d, 0xf5, 0x82,
-+	0xf7, 0xd8, 0x42, 0xce, 0x6f, 0x3d, 0x36, 0x47,
-+	0xf1, 0x05, 0x16, 0xe8, 0x1b, 0x6a, 0x8f, 0x93,
-+	0xf2, 0x8f, 0x37, 0x40, 0x12, 0x28, 0xa3, 0xe6,
-+	0xb9, 0x17, 0x4a, 0x1f, 0xb1, 0xd1, 0x66, 0x69,
-+	0x86, 0xc4, 0xfc, 0x97, 0xae, 0x3f, 0x8f, 0x1e,
-+	0x2b, 0xdf, 0xcd, 0xf9, 0x3c
-+};
-+static const u8 dec_output011[] __initconst = {
-+	0x7a, 0x57, 0xf2, 0xc7, 0x06, 0x3f, 0x50, 0x7b,
-+	0x36, 0x1a, 0x66, 0x5c, 0xb9, 0x0e, 0x5e, 0x3b,
-+	0x45, 0x60, 0xbe, 0x9a, 0x31, 0x9f, 0xff, 0x5d,
-+	0x66, 0x34, 0xb4, 0xdc, 0xfb, 0x9d, 0x8e, 0xee,
-+	0x6a, 0x33, 0xa4, 0x07, 0x3c, 0xf9, 0x4c, 0x30,
-+	0xa1, 0x24, 0x52, 0xf9, 0x50, 0x46, 0x88, 0x20,
-+	0x02, 0x32, 0x3a, 0x0e, 0x99, 0x63, 0xaf, 0x1f,
-+	0x15, 0x28, 0x2a, 0x05, 0xff, 0x57, 0x59, 0x5e,
-+	0x18, 0xa1, 0x1f, 0xd0, 0x92, 0x5c, 0x88, 0x66,
-+	0x1b, 0x00, 0x64, 0xa5, 0x93, 0x8d, 0x06, 0x46,
-+	0xb0, 0x64, 0x8b, 0x8b, 0xef, 0x99, 0x05, 0x35,
-+	0x85, 0xb3, 0xf3, 0x33, 0xbb, 0xec, 0x66, 0xb6,
-+	0x3d, 0x57, 0x42, 0xe3, 0xb4, 0xc6, 0xaa, 0xb0,
-+	0x41, 0x2a, 0xb9, 0x59, 0xa9, 0xf6, 0x3e, 0x15,
-+	0x26, 0x12, 0x03, 0x21, 0x4c, 0x74, 0x43, 0x13,
-+	0x2a, 0x03, 0x27, 0x09, 0xb4, 0xfb, 0xe7, 0xb7,
-+	0x40, 0xff, 0x5e, 0xce, 0x48, 0x9a, 0x60, 0xe3,
-+	0x8b, 0x80, 0x8c, 0x38, 0x2d, 0xcb, 0x93, 0x37,
-+	0x74, 0x05, 0x52, 0x6f, 0x73, 0x3e, 0xc3, 0xbc,
-+	0xca, 0x72, 0x0a, 0xeb, 0xf1, 0x3b, 0xa0, 0x95,
-+	0xdc, 0x8a, 0xc4, 0xa9, 0xdc, 0xca, 0x44, 0xd8,
-+	0x08, 0x63, 0x6a, 0x36, 0xd3, 0x3c, 0xb8, 0xac,
-+	0x46, 0x7d, 0xfd, 0xaa, 0xeb, 0x3e, 0x0f, 0x45,
-+	0x8f, 0x49, 0xda, 0x2b, 0xf2, 0x12, 0xbd, 0xaf,
-+	0x67, 0x8a, 0x63, 0x48, 0x4b, 0x55, 0x5f, 0x6d,
-+	0x8c, 0xb9, 0x76, 0x34, 0x84, 0xae, 0xc2, 0xfc,
-+	0x52, 0x64, 0x82, 0xf7, 0xb0, 0x06, 0xf0, 0x45,
-+	0x73, 0x12, 0x50, 0x30, 0x72, 0xea, 0x78, 0x9a,
-+	0xa8, 0xaf, 0xb5, 0xe3, 0xbb, 0x77, 0x52, 0xec,
-+	0x59, 0x84, 0xbf, 0x6b, 0x8f, 0xce, 0x86, 0x5e,
-+	0x1f, 0x23, 0xe9, 0xfb, 0x08, 0x86, 0xf7, 0x10,
-+	0xb9, 0xf2, 0x44, 0x96, 0x44, 0x63, 0xa9, 0xa8,
-+	0x78, 0x00, 0x23, 0xd6, 0xc7, 0xe7, 0x6e, 0x66,
-+	0x4f, 0xcc, 0xee, 0x15, 0xb3, 0xbd, 0x1d, 0xa0,
-+	0xe5, 0x9c, 0x1b, 0x24, 0x2c, 0x4d, 0x3c, 0x62,
-+	0x35, 0x9c, 0x88, 0x59, 0x09, 0xdd, 0x82, 0x1b,
-+	0xcf, 0x0a, 0x83, 0x6b, 0x3f, 0xae, 0x03, 0xc4,
-+	0xb4, 0xdd, 0x7e, 0x5b, 0x28, 0x76, 0x25, 0x96,
-+	0xd9, 0xc9, 0x9d, 0x5f, 0x86, 0xfa, 0xf6, 0xd7,
-+	0xd2, 0xe6, 0x76, 0x1d, 0x0f, 0xa1, 0xdc, 0x74,
-+	0x05, 0x1b, 0x1d, 0xe0, 0xcd, 0x16, 0xb0, 0xa8,
-+	0x8a, 0x34, 0x7b, 0x15, 0x11, 0x77, 0xe5, 0x7b,
-+	0x7e, 0x20, 0xf7, 0xda, 0x38, 0xda, 0xce, 0x70,
-+	0xe9, 0xf5, 0x6c, 0xd9, 0xbe, 0x0c, 0x4c, 0x95,
-+	0x4c, 0xc2, 0x9b, 0x34, 0x55, 0x55, 0xe1, 0xf3,
-+	0x46, 0x8e, 0x48, 0x74, 0x14, 0x4f, 0x9d, 0xc9,
-+	0xf5, 0xe8, 0x1a, 0xf0, 0x11, 0x4a, 0xc1, 0x8d,
-+	0xe0, 0x93, 0xa0, 0xbe, 0x09, 0x1c, 0x2b, 0x4e,
-+	0x0f, 0xb2, 0x87, 0x8b, 0x84, 0xfe, 0x92, 0x32,
-+	0x14, 0xd7, 0x93, 0xdf, 0xe7, 0x44, 0xbc, 0xc5,
-+	0xae, 0x53, 0x69, 0xd8, 0xb3, 0x79, 0x37, 0x80,
-+	0xe3, 0x17, 0x5c, 0xec, 0x53, 0x00, 0x9a, 0xe3,
-+	0x8e, 0xdc, 0x38, 0xb8, 0x66, 0xf0, 0xd3, 0xad,
-+	0x1d, 0x02, 0x96, 0x86, 0x3e, 0x9d, 0x3b, 0x5d,
-+	0xa5, 0x7f, 0x21, 0x10, 0xf1, 0x1f, 0x13, 0x20,
-+	0xf9, 0x57, 0x87, 0x20, 0xf5, 0x5f, 0xf1, 0x17,
-+	0x48, 0x0a, 0x51, 0x5a, 0xcd, 0x19, 0x03, 0xa6,
-+	0x5a, 0xd1, 0x12, 0x97, 0xe9, 0x48, 0xe2, 0x1d,
-+	0x83, 0x75, 0x50, 0xd9, 0x75, 0x7d, 0x6a, 0x82,
-+	0xa1, 0xf9, 0x4e, 0x54, 0x87, 0x89, 0xc9, 0x0c,
-+	0xb7, 0x5b, 0x6a, 0x91, 0xc1, 0x9c, 0xb2, 0xa9,
-+	0xdc, 0x9a, 0xa4, 0x49, 0x0a, 0x6d, 0x0d, 0xbb,
-+	0xde, 0x86, 0x44, 0xdd, 0x5d, 0x89, 0x2b, 0x96,
-+	0x0f, 0x23, 0x95, 0xad, 0xcc, 0xa2, 0xb3, 0xb9,
-+	0x7e, 0x74, 0x38, 0xba, 0x9f, 0x73, 0xae, 0x5f,
-+	0xf8, 0x68, 0xa2, 0xe0, 0xa9, 0xce, 0xbd, 0x40,
-+	0xd4, 0x4c, 0x6b, 0xd2, 0x56, 0x62, 0xb0, 0xcc,
-+	0x63, 0x7e, 0x5b, 0xd3, 0xae, 0xd1, 0x75, 0xce,
-+	0xbb, 0xb4, 0x5b, 0xa8, 0xf8, 0xb4, 0xac, 0x71,
-+	0x75, 0xaa, 0xc9, 0x9f, 0xbb, 0x6c, 0xad, 0x0f,
-+	0x55, 0x5d, 0xe8, 0x85, 0x7d, 0xf9, 0x21, 0x35,
-+	0xea, 0x92, 0x85, 0x2b, 0x00, 0xec, 0x84, 0x90,
-+	0x0a, 0x63, 0x96, 0xe4, 0x6b, 0xa9, 0x77, 0xb8,
-+	0x91, 0xf8, 0x46, 0x15, 0x72, 0x63, 0x70, 0x01,
-+	0x40, 0xa3, 0xa5, 0x76, 0x62, 0x2b, 0xbf, 0xf1,
-+	0xe5, 0x8d, 0x9f, 0xa3, 0xfa, 0x9b, 0x03, 0xbe,
-+	0xfe, 0x65, 0x6f, 0xa2, 0x29, 0x0d, 0x54, 0xb4,
-+	0x71, 0xce, 0xa9, 0xd6, 0x3d, 0x88, 0xf9, 0xaf,
-+	0x6b, 0xa8, 0x9e, 0xf4, 0x16, 0x96, 0x36, 0xb9,
-+	0x00, 0xdc, 0x10, 0xab, 0xb5, 0x08, 0x31, 0x1f,
-+	0x00, 0xb1, 0x3c, 0xd9, 0x38, 0x3e, 0xc6, 0x04,
-+	0xa7, 0x4e, 0xe8, 0xae, 0xed, 0x98, 0xc2, 0xf7,
-+	0xb9, 0x00, 0x5f, 0x8c, 0x60, 0xd1, 0xe5, 0x15,
-+	0xf7, 0xae, 0x1e, 0x84, 0x88, 0xd1, 0xf6, 0xbc,
-+	0x3a, 0x89, 0x35, 0x22, 0x83, 0x7c, 0xca, 0xf0,
-+	0x33, 0x82, 0x4c, 0x79, 0x3c, 0xfd, 0xb1, 0xae,
-+	0x52, 0x62, 0x55, 0xd2, 0x41, 0x60, 0xc6, 0xbb,
-+	0xfa, 0x0e, 0x59, 0xd6, 0xa8, 0xfe, 0x5d, 0xed,
-+	0x47, 0x3d, 0xe0, 0xea, 0x1f, 0x6e, 0x43, 0x51,
-+	0xec, 0x10, 0x52, 0x56, 0x77, 0x42, 0x6b, 0x52,
-+	0x87, 0xd8, 0xec, 0xe0, 0xaa, 0x76, 0xa5, 0x84,
-+	0x2a, 0x22, 0x24, 0xfd, 0x92, 0x40, 0x88, 0xd5,
-+	0x85, 0x1c, 0x1f, 0x6b, 0x47, 0xa0, 0xc4, 0xe4,
-+	0xef, 0xf4, 0xea, 0xd7, 0x59, 0xac, 0x2a, 0x9e,
-+	0x8c, 0xfa, 0x1f, 0x42, 0x08, 0xfe, 0x4f, 0x74,
-+	0xa0, 0x26, 0xf5, 0xb3, 0x84, 0xf6, 0x58, 0x5f,
-+	0x26, 0x66, 0x3e, 0xd7, 0xe4, 0x22, 0x91, 0x13,
-+	0xc8, 0xac, 0x25, 0x96, 0x23, 0xd8, 0x09, 0xea,
-+	0x45, 0x75, 0x23, 0xb8, 0x5f, 0xc2, 0x90, 0x8b,
-+	0x09, 0xc4, 0xfc, 0x47, 0x6c, 0x6d, 0x0a, 0xef,
-+	0x69, 0xa4, 0x38, 0x19, 0xcf, 0x7d, 0xf9, 0x09,
-+	0x73, 0x9b, 0x60, 0x5a, 0xf7, 0x37, 0xb5, 0xfe,
-+	0x9f, 0xe3, 0x2b, 0x4c, 0x0d, 0x6e, 0x19, 0xf1,
-+	0xd6, 0xc0, 0x70, 0xf3, 0x9d, 0x22, 0x3c, 0xf9,
-+	0x49, 0xce, 0x30, 0x8e, 0x44, 0xb5, 0x76, 0x15,
-+	0x8f, 0x52, 0xfd, 0xa5, 0x04, 0xb8, 0x55, 0x6a,
-+	0x36, 0x59, 0x7c, 0xc4, 0x48, 0xb8, 0xd7, 0xab,
-+	0x05, 0x66, 0xe9, 0x5e, 0x21, 0x6f, 0x6b, 0x36,
-+	0x29, 0xbb, 0xe9, 0xe3, 0xa2, 0x9a, 0xa8, 0xcd,
-+	0x55, 0x25, 0x11, 0xba, 0x5a, 0x58, 0xa0, 0xde,
-+	0xae, 0x19, 0x2a, 0x48, 0x5a, 0xff, 0x36, 0xcd,
-+	0x6d, 0x16, 0x7a, 0x73, 0x38, 0x46, 0xe5, 0x47,
-+	0x59, 0xc8, 0xa2, 0xf6, 0xe2, 0x6c, 0x83, 0xc5,
-+	0x36, 0x2c, 0x83, 0x7d, 0xb4, 0x01, 0x05, 0x69,
-+	0xe7, 0xaf, 0x5c, 0xc4, 0x64, 0x82, 0x12, 0x21,
-+	0xef, 0xf7, 0xd1, 0x7d, 0xb8, 0x8d, 0x8c, 0x98,
-+	0x7c, 0x5f, 0x7d, 0x92, 0x88, 0xb9, 0x94, 0x07,
-+	0x9c, 0xd8, 0xe9, 0x9c, 0x17, 0x38, 0xe3, 0x57,
-+	0x6c, 0xe0, 0xdc, 0xa5, 0x92, 0x42, 0xb3, 0xbd,
-+	0x50, 0xa2, 0x7e, 0xb5, 0xb1, 0x52, 0x72, 0x03,
-+	0x97, 0xd8, 0xaa, 0x9a, 0x1e, 0x75, 0x41, 0x11,
-+	0xa3, 0x4f, 0xcc, 0xd4, 0xe3, 0x73, 0xad, 0x96,
-+	0xdc, 0x47, 0x41, 0x9f, 0xb0, 0xbe, 0x79, 0x91,
-+	0xf5, 0xb6, 0x18, 0xfe, 0xc2, 0x83, 0x18, 0x7d,
-+	0x73, 0xd9, 0x4f, 0x83, 0x84, 0x03, 0xb3, 0xf0,
-+	0x77, 0x66, 0x3d, 0x83, 0x63, 0x2e, 0x2c, 0xf9,
-+	0xdd, 0xa6, 0x1f, 0x89, 0x82, 0xb8, 0x23, 0x42,
-+	0xeb, 0xe2, 0xca, 0x70, 0x82, 0x61, 0x41, 0x0a,
-+	0x6d, 0x5f, 0x75, 0xc5, 0xe2, 0xc4, 0x91, 0x18,
-+	0x44, 0x22, 0xfa, 0x34, 0x10, 0xf5, 0x20, 0xdc,
-+	0xb7, 0xdd, 0x2a, 0x20, 0x77, 0xf5, 0xf9, 0xce,
-+	0xdb, 0xa0, 0x0a, 0x52, 0x2a, 0x4e, 0xdd, 0xcc,
-+	0x97, 0xdf, 0x05, 0xe4, 0x5e, 0xb7, 0xaa, 0xf0,
-+	0xe2, 0x80, 0xff, 0xba, 0x1a, 0x0f, 0xac, 0xdf,
-+	0x02, 0x32, 0xe6, 0xf7, 0xc7, 0x17, 0x13, 0xb7,
-+	0xfc, 0x98, 0x48, 0x8c, 0x0d, 0x82, 0xc9, 0x80,
-+	0x7a, 0xe2, 0x0a, 0xc5, 0xb4, 0xde, 0x7c, 0x3c,
-+	0x79, 0x81, 0x0e, 0x28, 0x65, 0x79, 0x67, 0x82,
-+	0x69, 0x44, 0x66, 0x09, 0xf7, 0x16, 0x1a, 0xf9,
-+	0x7d, 0x80, 0xa1, 0x79, 0x14, 0xa9, 0xc8, 0x20,
-+	0xfb, 0xa2, 0x46, 0xbe, 0x08, 0x35, 0x17, 0x58,
-+	0xc1, 0x1a, 0xda, 0x2a, 0x6b, 0x2e, 0x1e, 0xe6,
-+	0x27, 0x55, 0x7b, 0x19, 0xe2, 0xfb, 0x64, 0xfc,
-+	0x5e, 0x15, 0x54, 0x3c, 0xe7, 0xc2, 0x11, 0x50,
-+	0x30, 0xb8, 0x72, 0x03, 0x0b, 0x1a, 0x9f, 0x86,
-+	0x27, 0x11, 0x5c, 0x06, 0x2b, 0xbd, 0x75, 0x1a,
-+	0x0a, 0xda, 0x01, 0xfa, 0x5c, 0x4a, 0xc1, 0x80,
-+	0x3a, 0x6e, 0x30, 0xc8, 0x2c, 0xeb, 0x56, 0xec,
-+	0x89, 0xfa, 0x35, 0x7b, 0xb2, 0xf0, 0x97, 0x08,
-+	0x86, 0x53, 0xbe, 0xbd, 0x40, 0x41, 0x38, 0x1c,
-+	0xb4, 0x8b, 0x79, 0x2e, 0x18, 0x96, 0x94, 0xde,
-+	0xe8, 0xca, 0xe5, 0x9f, 0x92, 0x9f, 0x15, 0x5d,
-+	0x56, 0x60, 0x5c, 0x09, 0xf9, 0x16, 0xf4, 0x17,
-+	0x0f, 0xf6, 0x4c, 0xda, 0xe6, 0x67, 0x89, 0x9f,
-+	0xca, 0x6c, 0xe7, 0x9b, 0x04, 0x62, 0x0e, 0x26,
-+	0xa6, 0x52, 0xbd, 0x29, 0xff, 0xc7, 0xa4, 0x96,
-+	0xe6, 0x6a, 0x02, 0xa5, 0x2e, 0x7b, 0xfe, 0x97,
-+	0x68, 0x3e, 0x2e, 0x5f, 0x3b, 0x0f, 0x36, 0xd6,
-+	0x98, 0x19, 0x59, 0x48, 0xd2, 0xc6, 0xe1, 0x55,
-+	0x1a, 0x6e, 0xd6, 0xed, 0x2c, 0xba, 0xc3, 0x9e,
-+	0x64, 0xc9, 0x95, 0x86, 0x35, 0x5e, 0x3e, 0x88,
-+	0x69, 0x99, 0x4b, 0xee, 0xbe, 0x9a, 0x99, 0xb5,
-+	0x6e, 0x58, 0xae, 0xdd, 0x22, 0xdb, 0xdd, 0x6b,
-+	0xfc, 0xaf, 0x90, 0xa3, 0x3d, 0xa4, 0xc1, 0x15,
-+	0x92, 0x18, 0x8d, 0xd2, 0x4b, 0x7b, 0x06, 0xd1,
-+	0x37, 0xb5, 0xe2, 0x7c, 0x2c, 0xf0, 0x25, 0xe4,
-+	0x94, 0x2a, 0xbd, 0xe3, 0x82, 0x70, 0x78, 0xa3,
-+	0x82, 0x10, 0x5a, 0x90, 0xd7, 0xa4, 0xfa, 0xaf,
-+	0x1a, 0x88, 0x59, 0xdc, 0x74, 0x12, 0xb4, 0x8e,
-+	0xd7, 0x19, 0x46, 0xf4, 0x84, 0x69, 0x9f, 0xbb,
-+	0x70, 0xa8, 0x4c, 0x52, 0x81, 0xa9, 0xff, 0x76,
-+	0x1c, 0xae, 0xd8, 0x11, 0x3d, 0x7f, 0x7d, 0xc5,
-+	0x12, 0x59, 0x28, 0x18, 0xc2, 0xa2, 0xb7, 0x1c,
-+	0x88, 0xf8, 0xd6, 0x1b, 0xa6, 0x7d, 0x9e, 0xde,
-+	0x29, 0xf8, 0xed, 0xff, 0xeb, 0x92, 0x24, 0x4f,
-+	0x05, 0xaa, 0xd9, 0x49, 0xba, 0x87, 0x59, 0x51,
-+	0xc9, 0x20, 0x5c, 0x9b, 0x74, 0xcf, 0x03, 0xd9,
-+	0x2d, 0x34, 0xc7, 0x5b, 0xa5, 0x40, 0xb2, 0x99,
-+	0xf5, 0xcb, 0xb4, 0xf6, 0xb7, 0x72, 0x4a, 0xd6,
-+	0xbd, 0xb0, 0xf3, 0x93, 0xe0, 0x1b, 0xa8, 0x04,
-+	0x1e, 0x35, 0xd4, 0x80, 0x20, 0xf4, 0x9c, 0x31,
-+	0x6b, 0x45, 0xb9, 0x15, 0xb0, 0x5e, 0xdd, 0x0a,
-+	0x33, 0x9c, 0x83, 0xcd, 0x58, 0x89, 0x50, 0x56,
-+	0xbb, 0x81, 0x00, 0x91, 0x32, 0xf3, 0x1b, 0x3e,
-+	0xcf, 0x45, 0xe1, 0xf9, 0xe1, 0x2c, 0x26, 0x78,
-+	0x93, 0x9a, 0x60, 0x46, 0xc9, 0xb5, 0x5e, 0x6a,
-+	0x28, 0x92, 0x87, 0x3f, 0x63, 0x7b, 0xdb, 0xf7,
-+	0xd0, 0x13, 0x9d, 0x32, 0x40, 0x5e, 0xcf, 0xfb,
-+	0x79, 0x68, 0x47, 0x4c, 0xfd, 0x01, 0x17, 0xe6,
-+	0x97, 0x93, 0x78, 0xbb, 0xa6, 0x27, 0xa3, 0xe8,
-+	0x1a, 0xe8, 0x94, 0x55, 0x7d, 0x08, 0xe5, 0xdc,
-+	0x66, 0xa3, 0x69, 0xc8, 0xca, 0xc5, 0xa1, 0x84,
-+	0x55, 0xde, 0x08, 0x91, 0x16, 0x3a, 0x0c, 0x86,
-+	0xab, 0x27, 0x2b, 0x64, 0x34, 0x02, 0x6c, 0x76,
-+	0x8b, 0xc6, 0xaf, 0xcc, 0xe1, 0xd6, 0x8c, 0x2a,
-+	0x18, 0x3d, 0xa6, 0x1b, 0x37, 0x75, 0x45, 0x73,
-+	0xc2, 0x75, 0xd7, 0x53, 0x78, 0x3a, 0xd6, 0xe8,
-+	0x29, 0xd2, 0x4a, 0xa8, 0x1e, 0x82, 0xf6, 0xb6,
-+	0x81, 0xde, 0x21, 0xed, 0x2b, 0x56, 0xbb, 0xf2,
-+	0xd0, 0x57, 0xc1, 0x7c, 0xd2, 0x6a, 0xd2, 0x56,
-+	0xf5, 0x13, 0x5f, 0x1c, 0x6a, 0x0b, 0x74, 0xfb,
-+	0xe9, 0xfe, 0x9e, 0xea, 0x95, 0xb2, 0x46, 0xab,
-+	0x0a, 0xfc, 0xfd, 0xf3, 0xbb, 0x04, 0x2b, 0x76,
-+	0x1b, 0xa4, 0x74, 0xb0, 0xc1, 0x78, 0xc3, 0x69,
-+	0xe2, 0xb0, 0x01, 0xe1, 0xde, 0x32, 0x4c, 0x8d,
-+	0x1a, 0xb3, 0x38, 0x08, 0xd5, 0xfc, 0x1f, 0xdc,
-+	0x0e, 0x2c, 0x9c, 0xb1, 0xa1, 0x63, 0x17, 0x22,
-+	0xf5, 0x6c, 0x93, 0x70, 0x74, 0x00, 0xf8, 0x39,
-+	0x01, 0x94, 0xd1, 0x32, 0x23, 0x56, 0x5d, 0xa6,
-+	0x02, 0x76, 0x76, 0x93, 0xce, 0x2f, 0x19, 0xe9,
-+	0x17, 0x52, 0xae, 0x6e, 0x2c, 0x6d, 0x61, 0x7f,
-+	0x3b, 0xaa, 0xe0, 0x52, 0x85, 0xc5, 0x65, 0xc1,
-+	0xbb, 0x8e, 0x5b, 0x21, 0xd5, 0xc9, 0x78, 0x83,
-+	0x07, 0x97, 0x4c, 0x62, 0x61, 0x41, 0xd4, 0xfc,
-+	0xc9, 0x39, 0xe3, 0x9b, 0xd0, 0xcc, 0x75, 0xc4,
-+	0x97, 0xe6, 0xdd, 0x2a, 0x5f, 0xa6, 0xe8, 0x59,
-+	0x6c, 0x98, 0xb9, 0x02, 0xe2, 0xa2, 0xd6, 0x68,
-+	0xee, 0x3b, 0x1d, 0xe3, 0x4d, 0x5b, 0x30, 0xef,
-+	0x03, 0xf2, 0xeb, 0x18, 0x57, 0x36, 0xe8, 0xa1,
-+	0xf4, 0x47, 0xfb, 0xcb, 0x8f, 0xcb, 0xc8, 0xf3,
-+	0x4f, 0x74, 0x9d, 0x9d, 0xb1, 0x8d, 0x14, 0x44,
-+	0xd9, 0x19, 0xb4, 0x54, 0x4f, 0x75, 0x19, 0x09,
-+	0xa0, 0x75, 0xbc, 0x3b, 0x82, 0xc6, 0x3f, 0xb8,
-+	0x83, 0x19, 0x6e, 0xd6, 0x37, 0xfe, 0x6e, 0x8a,
-+	0x4e, 0xe0, 0x4a, 0xab, 0x7b, 0xc8, 0xb4, 0x1d,
-+	0xf4, 0xed, 0x27, 0x03, 0x65, 0xa2, 0xa1, 0xae,
-+	0x11, 0xe7, 0x98, 0x78, 0x48, 0x91, 0xd2, 0xd2,
-+	0xd4, 0x23, 0x78, 0x50, 0xb1, 0x5b, 0x85, 0x10,
-+	0x8d, 0xca, 0x5f, 0x0f, 0x71, 0xae, 0x72, 0x9a,
-+	0xf6, 0x25, 0x19, 0x60, 0x06, 0xf7, 0x10, 0x34,
-+	0x18, 0x0d, 0xc9, 0x9f, 0x7b, 0x0c, 0x9b, 0x8f,
-+	0x91, 0x1b, 0x9f, 0xcd, 0x10, 0xee, 0x75, 0xf9,
-+	0x97, 0x66, 0xfc, 0x4d, 0x33, 0x6e, 0x28, 0x2b,
-+	0x92, 0x85, 0x4f, 0xab, 0x43, 0x8d, 0x8f, 0x7d,
-+	0x86, 0xa7, 0xc7, 0xd8, 0xd3, 0x0b, 0x8b, 0x57,
-+	0xb6, 0x1d, 0x95, 0x0d, 0xe9, 0xbc, 0xd9, 0x03,
-+	0xd9, 0x10, 0x19, 0xc3, 0x46, 0x63, 0x55, 0x87,
-+	0x61, 0x79, 0x6c, 0x95, 0x0e, 0x9c, 0xdd, 0xca,
-+	0xc3, 0xf3, 0x64, 0xf0, 0x7d, 0x76, 0xb7, 0x53,
-+	0x67, 0x2b, 0x1e, 0x44, 0x56, 0x81, 0xea, 0x8f,
-+	0x5c, 0x42, 0x16, 0xb8, 0x28, 0xeb, 0x1b, 0x61,
-+	0x10, 0x1e, 0xbf, 0xec, 0xa8
-+};
-+static const u8 dec_assoc011[] __initconst = {
-+	0xd6, 0x31, 0xda, 0x5d, 0x42, 0x5e, 0xd7
-+};
-+static const u8 dec_nonce011[] __initconst = {
-+	0xfd, 0x87, 0xd4, 0xd8, 0x62, 0xfd, 0xec, 0xaa
-+};
-+static const u8 dec_key011[] __initconst = {
-+	0x35, 0x4e, 0xb5, 0x70, 0x50, 0x42, 0x8a, 0x85,
-+	0xf2, 0xfb, 0xed, 0x7b, 0xd0, 0x9e, 0x97, 0xca,
-+	0xfa, 0x98, 0x66, 0x63, 0xee, 0x37, 0xcc, 0x52,
-+	0xfe, 0xd1, 0xdf, 0x95, 0x15, 0x34, 0x29, 0x38
-+};
-+
-+static const u8 dec_input012[] __initconst = {
-+	0x52, 0x34, 0xb3, 0x65, 0x3b, 0xb7, 0xe5, 0xd3,
-+	0xab, 0x49, 0x17, 0x60, 0xd2, 0x52, 0x56, 0xdf,
-+	0xdf, 0x34, 0x56, 0x82, 0xe2, 0xbe, 0xe5, 0xe1,
-+	0x28, 0xd1, 0x4e, 0x5f, 0x4f, 0x01, 0x7d, 0x3f,
-+	0x99, 0x6b, 0x30, 0x6e, 0x1a, 0x7c, 0x4c, 0x8e,
-+	0x62, 0x81, 0xae, 0x86, 0x3f, 0x6b, 0xd0, 0xb5,
-+	0xa9, 0xcf, 0x50, 0xf1, 0x02, 0x12, 0xa0, 0x0b,
-+	0x24, 0xe9, 0xe6, 0x72, 0x89, 0x2c, 0x52, 0x1b,
-+	0x34, 0x38, 0xf8, 0x75, 0x5f, 0xa0, 0x74, 0xe2,
-+	0x99, 0xdd, 0xa6, 0x4b, 0x14, 0x50, 0x4e, 0xf1,
-+	0xbe, 0xd6, 0x9e, 0xdb, 0xb2, 0x24, 0x27, 0x74,
-+	0x12, 0x4a, 0x78, 0x78, 0x17, 0xa5, 0x58, 0x8e,
-+	0x2f, 0xf9, 0xf4, 0x8d, 0xee, 0x03, 0x88, 0xae,
-+	0xb8, 0x29, 0xa1, 0x2f, 0x4b, 0xee, 0x92, 0xbd,
-+	0x87, 0xb3, 0xce, 0x34, 0x21, 0x57, 0x46, 0x04,
-+	0x49, 0x0c, 0x80, 0xf2, 0x01, 0x13, 0xa1, 0x55,
-+	0xb3, 0xff, 0x44, 0x30, 0x3c, 0x1c, 0xd0, 0xef,
-+	0xbc, 0x18, 0x74, 0x26, 0xad, 0x41, 0x5b, 0x5b,
-+	0x3e, 0x9a, 0x7a, 0x46, 0x4f, 0x16, 0xd6, 0x74,
-+	0x5a, 0xb7, 0x3a, 0x28, 0x31, 0xd8, 0xae, 0x26,
-+	0xac, 0x50, 0x53, 0x86, 0xf2, 0x56, 0xd7, 0x3f,
-+	0x29, 0xbc, 0x45, 0x68, 0x8e, 0xcb, 0x98, 0x64,
-+	0xdd, 0xc9, 0xba, 0xb8, 0x4b, 0x7b, 0x82, 0xdd,
-+	0x14, 0xa7, 0xcb, 0x71, 0x72, 0x00, 0x5c, 0xad,
-+	0x7b, 0x6a, 0x89, 0xa4, 0x3d, 0xbf, 0xb5, 0x4b,
-+	0x3e, 0x7c, 0x5a, 0xcf, 0xb8, 0xa1, 0xc5, 0x6e,
-+	0xc8, 0xb6, 0x31, 0x57, 0x7b, 0xdf, 0xa5, 0x7e,
-+	0xb1, 0xd6, 0x42, 0x2a, 0x31, 0x36, 0xd1, 0xd0,
-+	0x3f, 0x7a, 0xe5, 0x94, 0xd6, 0x36, 0xa0, 0x6f,
-+	0xb7, 0x40, 0x7d, 0x37, 0xc6, 0x55, 0x7c, 0x50,
-+	0x40, 0x6d, 0x29, 0x89, 0xe3, 0x5a, 0xae, 0x97,
-+	0xe7, 0x44, 0x49, 0x6e, 0xbd, 0x81, 0x3d, 0x03,
-+	0x93, 0x06, 0x12, 0x06, 0xe2, 0x41, 0x12, 0x4a,
-+	0xf1, 0x6a, 0xa4, 0x58, 0xa2, 0xfb, 0xd2, 0x15,
-+	0xba, 0xc9, 0x79, 0xc9, 0xce, 0x5e, 0x13, 0xbb,
-+	0xf1, 0x09, 0x04, 0xcc, 0xfd, 0xe8, 0x51, 0x34,
-+	0x6a, 0xe8, 0x61, 0x88, 0xda, 0xed, 0x01, 0x47,
-+	0x84, 0xf5, 0x73, 0x25, 0xf9, 0x1c, 0x42, 0x86,
-+	0x07, 0xf3, 0x5b, 0x1a, 0x01, 0xb3, 0xeb, 0x24,
-+	0x32, 0x8d, 0xf6, 0xed, 0x7c, 0x4b, 0xeb, 0x3c,
-+	0x36, 0x42, 0x28, 0xdf, 0xdf, 0xb6, 0xbe, 0xd9,
-+	0x8c, 0x52, 0xd3, 0x2b, 0x08, 0x90, 0x8c, 0xe7,
-+	0x98, 0x31, 0xe2, 0x32, 0x8e, 0xfc, 0x11, 0x48,
-+	0x00, 0xa8, 0x6a, 0x42, 0x4a, 0x02, 0xc6, 0x4b,
-+	0x09, 0xf1, 0xe3, 0x49, 0xf3, 0x45, 0x1f, 0x0e,
-+	0xbc, 0x56, 0xe2, 0xe4, 0xdf, 0xfb, 0xeb, 0x61,
-+	0xfa, 0x24, 0xc1, 0x63, 0x75, 0xbb, 0x47, 0x75,
-+	0xaf, 0xe1, 0x53, 0x16, 0x96, 0x21, 0x85, 0x26,
-+	0x11, 0xb3, 0x76, 0xe3, 0x23, 0xa1, 0x6b, 0x74,
-+	0x37, 0xd0, 0xde, 0x06, 0x90, 0x71, 0x5d, 0x43,
-+	0x88, 0x9b, 0x00, 0x54, 0xa6, 0x75, 0x2f, 0xa1,
-+	0xc2, 0x0b, 0x73, 0x20, 0x1d, 0xb6, 0x21, 0x79,
-+	0x57, 0x3f, 0xfa, 0x09, 0xbe, 0x8a, 0x33, 0xc3,
-+	0x52, 0xf0, 0x1d, 0x82, 0x31, 0xd1, 0x55, 0xb5,
-+	0x6c, 0x99, 0x25, 0xcf, 0x5c, 0x32, 0xce, 0xe9,
-+	0x0d, 0xfa, 0x69, 0x2c, 0xd5, 0x0d, 0xc5, 0x6d,
-+	0x86, 0xd0, 0x0c, 0x3b, 0x06, 0x50, 0x79, 0xe8,
-+	0xc3, 0xae, 0x04, 0xe6, 0xcd, 0x51, 0xe4, 0x26,
-+	0x9b, 0x4f, 0x7e, 0xa6, 0x0f, 0xab, 0xd8, 0xe5,
-+	0xde, 0xa9, 0x00, 0x95, 0xbe, 0xa3, 0x9d, 0x5d,
-+	0xb2, 0x09, 0x70, 0x18, 0x1c, 0xf0, 0xac, 0x29,
-+	0x23, 0x02, 0x29, 0x28, 0xd2, 0x74, 0x35, 0x57,
-+	0x62, 0x0f, 0x24, 0xea, 0x5e, 0x33, 0xc2, 0x92,
-+	0xf3, 0x78, 0x4d, 0x30, 0x1e, 0xa1, 0x99, 0xa9,
-+	0x82, 0xb0, 0x42, 0x31, 0x8d, 0xad, 0x8a, 0xbc,
-+	0xfc, 0xd4, 0x57, 0x47, 0x3e, 0xb4, 0x50, 0xdd,
-+	0x6e, 0x2c, 0x80, 0x4d, 0x22, 0xf1, 0xfb, 0x57,
-+	0xc4, 0xdd, 0x17, 0xe1, 0x8a, 0x36, 0x4a, 0xb3,
-+	0x37, 0xca, 0xc9, 0x4e, 0xab, 0xd5, 0x69, 0xc4,
-+	0xf4, 0xbc, 0x0b, 0x3b, 0x44, 0x4b, 0x29, 0x9c,
-+	0xee, 0xd4, 0x35, 0x22, 0x21, 0xb0, 0x1f, 0x27,
-+	0x64, 0xa8, 0x51, 0x1b, 0xf0, 0x9f, 0x19, 0x5c,
-+	0xfb, 0x5a, 0x64, 0x74, 0x70, 0x45, 0x09, 0xf5,
-+	0x64, 0xfe, 0x1a, 0x2d, 0xc9, 0x14, 0x04, 0x14,
-+	0xcf, 0xd5, 0x7d, 0x60, 0xaf, 0x94, 0x39, 0x94,
-+	0xe2, 0x7d, 0x79, 0x82, 0xd0, 0x65, 0x3b, 0x6b,
-+	0x9c, 0x19, 0x84, 0xb4, 0x6d, 0xb3, 0x0c, 0x99,
-+	0xc0, 0x56, 0xa8, 0xbd, 0x73, 0xce, 0x05, 0x84,
-+	0x3e, 0x30, 0xaa, 0xc4, 0x9b, 0x1b, 0x04, 0x2a,
-+	0x9f, 0xd7, 0x43, 0x2b, 0x23, 0xdf, 0xbf, 0xaa,
-+	0xd5, 0xc2, 0x43, 0x2d, 0x70, 0xab, 0xdc, 0x75,
-+	0xad, 0xac, 0xf7, 0xc0, 0xbe, 0x67, 0xb2, 0x74,
-+	0xed, 0x67, 0x10, 0x4a, 0x92, 0x60, 0xc1, 0x40,
-+	0x50, 0x19, 0x8a, 0x8a, 0x8c, 0x09, 0x0e, 0x72,
-+	0xe1, 0x73, 0x5e, 0xe8, 0x41, 0x85, 0x63, 0x9f,
-+	0x3f, 0xd7, 0x7d, 0xc4, 0xfb, 0x22, 0x5d, 0x92,
-+	0x6c, 0xb3, 0x1e, 0xe2, 0x50, 0x2f, 0x82, 0xa8,
-+	0x28, 0xc0, 0xb5, 0xd7, 0x5f, 0x68, 0x0d, 0x2c,
-+	0x2d, 0xaf, 0x7e, 0xfa, 0x2e, 0x08, 0x0f, 0x1f,
-+	0x70, 0x9f, 0xe9, 0x19, 0x72, 0x55, 0xf8, 0xfb,
-+	0x51, 0xd2, 0x33, 0x5d, 0xa0, 0xd3, 0x2b, 0x0a,
-+	0x6c, 0xbc, 0x4e, 0xcf, 0x36, 0x4d, 0xdc, 0x3b,
-+	0xe9, 0x3e, 0x81, 0x7c, 0x61, 0xdb, 0x20, 0x2d,
-+	0x3a, 0xc3, 0xb3, 0x0c, 0x1e, 0x00, 0xb9, 0x7c,
-+	0xf5, 0xca, 0x10, 0x5f, 0x3a, 0x71, 0xb3, 0xe4,
-+	0x20, 0xdb, 0x0c, 0x2a, 0x98, 0x63, 0x45, 0x00,
-+	0x58, 0xf6, 0x68, 0xe4, 0x0b, 0xda, 0x13, 0x3b,
-+	0x60, 0x5c, 0x76, 0xdb, 0xb9, 0x97, 0x71, 0xe4,
-+	0xd9, 0xb7, 0xdb, 0xbd, 0x68, 0xc7, 0x84, 0x84,
-+	0xaa, 0x7c, 0x68, 0x62, 0x5e, 0x16, 0xfc, 0xba,
-+	0x72, 0xaa, 0x9a, 0xa9, 0xeb, 0x7c, 0x75, 0x47,
-+	0x97, 0x7e, 0xad, 0xe2, 0xd9, 0x91, 0xe8, 0xe4,
-+	0xa5, 0x31, 0xd7, 0x01, 0x8e, 0xa2, 0x11, 0x88,
-+	0x95, 0xb9, 0xf2, 0x9b, 0xd3, 0x7f, 0x1b, 0x81,
-+	0x22, 0xf7, 0x98, 0x60, 0x0a, 0x64, 0xa6, 0xc1,
-+	0xf6, 0x49, 0xc7, 0xe3, 0x07, 0x4d, 0x94, 0x7a,
-+	0xcf, 0x6e, 0x68, 0x0c, 0x1b, 0x3f, 0x6e, 0x2e,
-+	0xee, 0x92, 0xfa, 0x52, 0xb3, 0x59, 0xf8, 0xf1,
-+	0x8f, 0x6a, 0x66, 0xa3, 0x82, 0x76, 0x4a, 0x07,
-+	0x1a, 0xc7, 0xdd, 0xf5, 0xda, 0x9c, 0x3c, 0x24,
-+	0xbf, 0xfd, 0x42, 0xa1, 0x10, 0x64, 0x6a, 0x0f,
-+	0x89, 0xee, 0x36, 0xa5, 0xce, 0x99, 0x48, 0x6a,
-+	0xf0, 0x9f, 0x9e, 0x69, 0xa4, 0x40, 0x20, 0xe9,
-+	0x16, 0x15, 0xf7, 0xdb, 0x75, 0x02, 0xcb, 0xe9,
-+	0x73, 0x8b, 0x3b, 0x49, 0x2f, 0xf0, 0xaf, 0x51,
-+	0x06, 0x5c, 0xdf, 0x27, 0x27, 0x49, 0x6a, 0xd1,
-+	0xcc, 0xc7, 0xb5, 0x63, 0xb5, 0xfc, 0xb8, 0x5c,
-+	0x87, 0x7f, 0x84, 0xb4, 0xcc, 0x14, 0xa9, 0x53,
-+	0xda, 0xa4, 0x56, 0xf8, 0xb6, 0x1b, 0xcc, 0x40,
-+	0x27, 0x52, 0x06, 0x5a, 0x13, 0x81, 0xd7, 0x3a,
-+	0xd4, 0x3b, 0xfb, 0x49, 0x65, 0x31, 0x33, 0xb2,
-+	0xfa, 0xcd, 0xad, 0x58, 0x4e, 0x2b, 0xae, 0xd2,
-+	0x20, 0xfb, 0x1a, 0x48, 0xb4, 0x3f, 0x9a, 0xd8,
-+	0x7a, 0x35, 0x4a, 0xc8, 0xee, 0x88, 0x5e, 0x07,
-+	0x66, 0x54, 0xb9, 0xec, 0x9f, 0xa3, 0xe3, 0xb9,
-+	0x37, 0xaa, 0x49, 0x76, 0x31, 0xda, 0x74, 0x2d,
-+	0x3c, 0xa4, 0x65, 0x10, 0x32, 0x38, 0xf0, 0xde,
-+	0xd3, 0x99, 0x17, 0xaa, 0x71, 0xaa, 0x8f, 0x0f,
-+	0x8c, 0xaf, 0xa2, 0xf8, 0x5d, 0x64, 0xba, 0x1d,
-+	0xa3, 0xef, 0x96, 0x73, 0xe8, 0xa1, 0x02, 0x8d,
-+	0x0c, 0x6d, 0xb8, 0x06, 0x90, 0xb8, 0x08, 0x56,
-+	0x2c, 0xa7, 0x06, 0xc9, 0xc2, 0x38, 0xdb, 0x7c,
-+	0x63, 0xb1, 0x57, 0x8e, 0xea, 0x7c, 0x79, 0xf3,
-+	0x49, 0x1d, 0xfe, 0x9f, 0xf3, 0x6e, 0xb1, 0x1d,
-+	0xba, 0x19, 0x80, 0x1a, 0x0a, 0xd3, 0xb0, 0x26,
-+	0x21, 0x40, 0xb1, 0x7c, 0xf9, 0x4d, 0x8d, 0x10,
-+	0xc1, 0x7e, 0xf4, 0xf6, 0x3c, 0xa8, 0xfd, 0x7c,
-+	0xa3, 0x92, 0xb2, 0x0f, 0xaa, 0xcc, 0xa6, 0x11,
-+	0xfe, 0x04, 0xe3, 0xd1, 0x7a, 0x32, 0x89, 0xdf,
-+	0x0d, 0xc4, 0x8f, 0x79, 0x6b, 0xca, 0x16, 0x7c,
-+	0x6e, 0xf9, 0xad, 0x0f, 0xf6, 0xfe, 0x27, 0xdb,
-+	0xc4, 0x13, 0x70, 0xf1, 0x62, 0x1a, 0x4f, 0x79,
-+	0x40, 0xc9, 0x9b, 0x8b, 0x21, 0xea, 0x84, 0xfa,
-+	0xf5, 0xf1, 0x89, 0xce, 0xb7, 0x55, 0x0a, 0x80,
-+	0x39, 0x2f, 0x55, 0x36, 0x16, 0x9c, 0x7b, 0x08,
-+	0xbd, 0x87, 0x0d, 0xa5, 0x32, 0xf1, 0x52, 0x7c,
-+	0xe8, 0x55, 0x60, 0x5b, 0xd7, 0x69, 0xe4, 0xfc,
-+	0xfa, 0x12, 0x85, 0x96, 0xea, 0x50, 0x28, 0xab,
-+	0x8a, 0xf7, 0xbb, 0x0e, 0x53, 0x74, 0xca, 0xa6,
-+	0x27, 0x09, 0xc2, 0xb5, 0xde, 0x18, 0x14, 0xd9,
-+	0xea, 0xe5, 0x29, 0x1c, 0x40, 0x56, 0xcf, 0xd7,
-+	0xae, 0x05, 0x3f, 0x65, 0xaf, 0x05, 0x73, 0xe2,
-+	0x35, 0x96, 0x27, 0x07, 0x14, 0xc0, 0xad, 0x33,
-+	0xf1, 0xdc, 0x44, 0x7a, 0x89, 0x17, 0x77, 0xd2,
-+	0x9c, 0x58, 0x60, 0xf0, 0x3f, 0x7b, 0x2d, 0x2e,
-+	0x57, 0x95, 0x54, 0x87, 0xed, 0xf2, 0xc7, 0x4c,
-+	0xf0, 0xae, 0x56, 0x29, 0x19, 0x7d, 0x66, 0x4b,
-+	0x9b, 0x83, 0x84, 0x42, 0x3b, 0x01, 0x25, 0x66,
-+	0x8e, 0x02, 0xde, 0xb9, 0x83, 0x54, 0x19, 0xf6,
-+	0x9f, 0x79, 0x0d, 0x67, 0xc5, 0x1d, 0x7a, 0x44,
-+	0x02, 0x98, 0xa7, 0x16, 0x1c, 0x29, 0x0d, 0x74,
-+	0xff, 0x85, 0x40, 0x06, 0xef, 0x2c, 0xa9, 0xc6,
-+	0xf5, 0x53, 0x07, 0x06, 0xae, 0xe4, 0xfa, 0x5f,
-+	0xd8, 0x39, 0x4d, 0xf1, 0x9b, 0x6b, 0xd9, 0x24,
-+	0x84, 0xfe, 0x03, 0x4c, 0xb2, 0x3f, 0xdf, 0xa1,
-+	0x05, 0x9e, 0x50, 0x14, 0x5a, 0xd9, 0x1a, 0xa2,
-+	0xa7, 0xfa, 0xfa, 0x17, 0xf7, 0x78, 0xd6, 0xb5,
-+	0x92, 0x61, 0x91, 0xac, 0x36, 0xfa, 0x56, 0x0d,
-+	0x38, 0x32, 0x18, 0x85, 0x08, 0x58, 0x37, 0xf0,
-+	0x4b, 0xdb, 0x59, 0xe7, 0xa4, 0x34, 0xc0, 0x1b,
-+	0x01, 0xaf, 0x2d, 0xde, 0xa1, 0xaa, 0x5d, 0xd3,
-+	0xec, 0xe1, 0xd4, 0xf7, 0xe6, 0x54, 0x68, 0xf0,
-+	0x51, 0x97, 0xa7, 0x89, 0xea, 0x24, 0xad, 0xd3,
-+	0x6e, 0x47, 0x93, 0x8b, 0x4b, 0xb4, 0xf7, 0x1c,
-+	0x42, 0x06, 0x67, 0xe8, 0x99, 0xf6, 0xf5, 0x7b,
-+	0x85, 0xb5, 0x65, 0xb5, 0xb5, 0xd2, 0x37, 0xf5,
-+	0xf3, 0x02, 0xa6, 0x4d, 0x11, 0xa7, 0xdc, 0x51,
-+	0x09, 0x7f, 0xa0, 0xd8, 0x88, 0x1c, 0x13, 0x71,
-+	0xae, 0x9c, 0xb7, 0x7b, 0x34, 0xd6, 0x4e, 0x68,
-+	0x26, 0x83, 0x51, 0xaf, 0x1d, 0xee, 0x8b, 0xbb,
-+	0x69, 0x43, 0x2b, 0x9e, 0x8a, 0xbc, 0x02, 0x0e,
-+	0xa0, 0x1b, 0xe0, 0xa8, 0x5f, 0x6f, 0xaf, 0x1b,
-+	0x8f, 0xe7, 0x64, 0x71, 0x74, 0x11, 0x7e, 0xa8,
-+	0xd8, 0xf9, 0x97, 0x06, 0xc3, 0xb6, 0xfb, 0xfb,
-+	0xb7, 0x3d, 0x35, 0x9d, 0x3b, 0x52, 0xed, 0x54,
-+	0xca, 0xf4, 0x81, 0x01, 0x2d, 0x1b, 0xc3, 0xa7,
-+	0x00, 0x3d, 0x1a, 0x39, 0x54, 0xe1, 0xf6, 0xff,
-+	0xed, 0x6f, 0x0b, 0x5a, 0x68, 0xda, 0x58, 0xdd,
-+	0xa9, 0xcf, 0x5c, 0x4a, 0xe5, 0x09, 0x4e, 0xde,
-+	0x9d, 0xbc, 0x3e, 0xee, 0x5a, 0x00, 0x3b, 0x2c,
-+	0x87, 0x10, 0x65, 0x60, 0xdd, 0xd7, 0x56, 0xd1,
-+	0x4c, 0x64, 0x45, 0xe4, 0x21, 0xec, 0x78, 0xf8,
-+	0x25, 0x7a, 0x3e, 0x16, 0x5d, 0x09, 0x53, 0x14,
-+	0xbe, 0x4f, 0xae, 0x87, 0xd8, 0xd1, 0xaa, 0x3c,
-+	0xf6, 0x3e, 0xa4, 0x70, 0x8c, 0x5e, 0x70, 0xa4,
-+	0xb3, 0x6b, 0x66, 0x73, 0xd3, 0xbf, 0x31, 0x06,
-+	0x19, 0x62, 0x93, 0x15, 0xf2, 0x86, 0xe4, 0x52,
-+	0x7e, 0x53, 0x4c, 0x12, 0x38, 0xcc, 0x34, 0x7d,
-+	0x57, 0xf6, 0x42, 0x93, 0x8a, 0xc4, 0xee, 0x5c,
-+	0x8a, 0xe1, 0x52, 0x8f, 0x56, 0x64, 0xf6, 0xa6,
-+	0xd1, 0x91, 0x57, 0x70, 0xcd, 0x11, 0x76, 0xf5,
-+	0x59, 0x60, 0x60, 0x3c, 0xc1, 0xc3, 0x0b, 0x7f,
-+	0x58, 0x1a, 0x50, 0x91, 0xf1, 0x68, 0x8f, 0x6e,
-+	0x74, 0x74, 0xa8, 0x51, 0x0b, 0xf7, 0x7a, 0x98,
-+	0x37, 0xf2, 0x0a, 0x0e, 0xa4, 0x97, 0x04, 0xb8,
-+	0x9b, 0xfd, 0xa0, 0xea, 0xf7, 0x0d, 0xe1, 0xdb,
-+	0x03, 0xf0, 0x31, 0x29, 0xf8, 0xdd, 0x6b, 0x8b,
-+	0x5d, 0xd8, 0x59, 0xa9, 0x29, 0xcf, 0x9a, 0x79,
-+	0x89, 0x19, 0x63, 0x46, 0x09, 0x79, 0x6a, 0x11,
-+	0xda, 0x63, 0x68, 0x48, 0x77, 0x23, 0xfb, 0x7d,
-+	0x3a, 0x43, 0xcb, 0x02, 0x3b, 0x7a, 0x6d, 0x10,
-+	0x2a, 0x9e, 0xac, 0xf1, 0xd4, 0x19, 0xf8, 0x23,
-+	0x64, 0x1d, 0x2c, 0x5f, 0xf2, 0xb0, 0x5c, 0x23,
-+	0x27, 0xf7, 0x27, 0x30, 0x16, 0x37, 0xb1, 0x90,
-+	0xab, 0x38, 0xfb, 0x55, 0xcd, 0x78, 0x58, 0xd4,
-+	0x7d, 0x43, 0xf6, 0x45, 0x5e, 0x55, 0x8d, 0xb1,
-+	0x02, 0x65, 0x58, 0xb4, 0x13, 0x4b, 0x36, 0xf7,
-+	0xcc, 0xfe, 0x3d, 0x0b, 0x82, 0xe2, 0x12, 0x11,
-+	0xbb, 0xe6, 0xb8, 0x3a, 0x48, 0x71, 0xc7, 0x50,
-+	0x06, 0x16, 0x3a, 0xe6, 0x7c, 0x05, 0xc7, 0xc8,
-+	0x4d, 0x2f, 0x08, 0x6a, 0x17, 0x9a, 0x95, 0x97,
-+	0x50, 0x68, 0xdc, 0x28, 0x18, 0xc4, 0x61, 0x38,
-+	0xb9, 0xe0, 0x3e, 0x78, 0xdb, 0x29, 0xe0, 0x9f,
-+	0x52, 0xdd, 0xf8, 0x4f, 0x91, 0xc1, 0xd0, 0x33,
-+	0xa1, 0x7a, 0x8e, 0x30, 0x13, 0x82, 0x07, 0x9f,
-+	0xd3, 0x31, 0x0f, 0x23, 0xbe, 0x32, 0x5a, 0x75,
-+	0xcf, 0x96, 0xb2, 0xec, 0xb5, 0x32, 0xac, 0x21,
-+	0xd1, 0x82, 0x33, 0xd3, 0x15, 0x74, 0xbd, 0x90,
-+	0xf1, 0x2c, 0xe6, 0x5f, 0x8d, 0xe3, 0x02, 0xe8,
-+	0xe9, 0xc4, 0xca, 0x96, 0xeb, 0x0e, 0xbc, 0x91,
-+	0xf4, 0xb9, 0xea, 0xd9, 0x1b, 0x75, 0xbd, 0xe1,
-+	0xac, 0x2a, 0x05, 0x37, 0x52, 0x9b, 0x1b, 0x3f,
-+	0x5a, 0xdc, 0x21, 0xc3, 0x98, 0xbb, 0xaf, 0xa3,
-+	0xf2, 0x00, 0xbf, 0x0d, 0x30, 0x89, 0x05, 0xcc,
-+	0xa5, 0x76, 0xf5, 0x06, 0xf0, 0xc6, 0x54, 0x8a,
-+	0x5d, 0xd4, 0x1e, 0xc1, 0xf2, 0xce, 0xb0, 0x62,
-+	0xc8, 0xfc, 0x59, 0x42, 0x9a, 0x90, 0x60, 0x55,
-+	0xfe, 0x88, 0xa5, 0x8b, 0xb8, 0x33, 0x0c, 0x23,
-+	0x24, 0x0d, 0x15, 0x70, 0x37, 0x1e, 0x3d, 0xf6,
-+	0xd2, 0xea, 0x92, 0x10, 0xb2, 0xc4, 0x51, 0xac,
-+	0xf2, 0xac, 0xf3, 0x6b, 0x6c, 0xaa, 0xcf, 0x12,
-+	0xc5, 0x6c, 0x90, 0x50, 0xb5, 0x0c, 0xfc, 0x1a,
-+	0x15, 0x52, 0xe9, 0x26, 0xc6, 0x52, 0xa4, 0xe7,
-+	0x81, 0x69, 0xe1, 0xe7, 0x9e, 0x30, 0x01, 0xec,
-+	0x84, 0x89, 0xb2, 0x0d, 0x66, 0xdd, 0xce, 0x28,
-+	0x5c, 0xec, 0x98, 0x46, 0x68, 0x21, 0x9f, 0x88,
-+	0x3f, 0x1f, 0x42, 0x77, 0xce, 0xd0, 0x61, 0xd4,
-+	0x20, 0xa7, 0xff, 0x53, 0xad, 0x37, 0xd0, 0x17,
-+	0x35, 0xc9, 0xfc, 0xba, 0x0a, 0x78, 0x3f, 0xf2,
-+	0xcc, 0x86, 0x89, 0xe8, 0x4b, 0x3c, 0x48, 0x33,
-+	0x09, 0x7f, 0xc6, 0xc0, 0xdd, 0xb8, 0xfd, 0x7a,
-+	0x66, 0x66, 0x65, 0xeb, 0x47, 0xa7, 0x04, 0x28,
-+	0xa3, 0x19, 0x8e, 0xa9, 0xb1, 0x13, 0x67, 0x62,
-+	0x70, 0xcf, 0xd6
-+};
-+static const u8 dec_output012[] __initconst = {
-+	0x74, 0xa6, 0x3e, 0xe4, 0xb1, 0xcb, 0xaf, 0xb0,
-+	0x40, 0xe5, 0x0f, 0x9e, 0xf1, 0xf2, 0x89, 0xb5,
-+	0x42, 0x34, 0x8a, 0xa1, 0x03, 0xb7, 0xe9, 0x57,
-+	0x46, 0xbe, 0x20, 0xe4, 0x6e, 0xb0, 0xeb, 0xff,
-+	0xea, 0x07, 0x7e, 0xef, 0xe2, 0x55, 0x9f, 0xe5,
-+	0x78, 0x3a, 0xb7, 0x83, 0xc2, 0x18, 0x40, 0x7b,
-+	0xeb, 0xcd, 0x81, 0xfb, 0x90, 0x12, 0x9e, 0x46,
-+	0xa9, 0xd6, 0x4a, 0xba, 0xb0, 0x62, 0xdb, 0x6b,
-+	0x99, 0xc4, 0xdb, 0x54, 0x4b, 0xb8, 0xa5, 0x71,
-+	0xcb, 0xcd, 0x63, 0x32, 0x55, 0xfb, 0x31, 0xf0,
-+	0x38, 0xf5, 0xbe, 0x78, 0xe4, 0x45, 0xce, 0x1b,
-+	0x6a, 0x5b, 0x0e, 0xf4, 0x16, 0xe4, 0xb1, 0x3d,
-+	0xf6, 0x63, 0x7b, 0xa7, 0x0c, 0xde, 0x6f, 0x8f,
-+	0x74, 0xdf, 0xe0, 0x1e, 0x9d, 0xce, 0x8f, 0x24,
-+	0xef, 0x23, 0x35, 0x33, 0x7b, 0x83, 0x34, 0x23,
-+	0x58, 0x74, 0x14, 0x77, 0x1f, 0xc2, 0x4f, 0x4e,
-+	0xc6, 0x89, 0xf9, 0x52, 0x09, 0x37, 0x64, 0x14,
-+	0xc4, 0x01, 0x6b, 0x9d, 0x77, 0xe8, 0x90, 0x5d,
-+	0xa8, 0x4a, 0x2a, 0xef, 0x5c, 0x7f, 0xeb, 0xbb,
-+	0xb2, 0xc6, 0x93, 0x99, 0x66, 0xdc, 0x7f, 0xd4,
-+	0x9e, 0x2a, 0xca, 0x8d, 0xdb, 0xe7, 0x20, 0xcf,
-+	0xe4, 0x73, 0xae, 0x49, 0x7d, 0x64, 0x0f, 0x0e,
-+	0x28, 0x46, 0xa9, 0xa8, 0x32, 0xe4, 0x0e, 0xf6,
-+	0x51, 0x53, 0xb8, 0x3c, 0xb1, 0xff, 0xa3, 0x33,
-+	0x41, 0x75, 0xff, 0xf1, 0x6f, 0xf1, 0xfb, 0xbb,
-+	0x83, 0x7f, 0x06, 0x9b, 0xe7, 0x1b, 0x0a, 0xe0,
-+	0x5c, 0x33, 0x60, 0x5b, 0xdb, 0x5b, 0xed, 0xfe,
-+	0xa5, 0x16, 0x19, 0x72, 0xa3, 0x64, 0x23, 0x00,
-+	0x02, 0xc7, 0xf3, 0x6a, 0x81, 0x3e, 0x44, 0x1d,
-+	0x79, 0x15, 0x5f, 0x9a, 0xde, 0xe2, 0xfd, 0x1b,
-+	0x73, 0xc1, 0xbc, 0x23, 0xba, 0x31, 0xd2, 0x50,
-+	0xd5, 0xad, 0x7f, 0x74, 0xa7, 0xc9, 0xf8, 0x3e,
-+	0x2b, 0x26, 0x10, 0xf6, 0x03, 0x36, 0x74, 0xe4,
-+	0x0e, 0x6a, 0x72, 0xb7, 0x73, 0x0a, 0x42, 0x28,
-+	0xc2, 0xad, 0x5e, 0x03, 0xbe, 0xb8, 0x0b, 0xa8,
-+	0x5b, 0xd4, 0xb8, 0xba, 0x52, 0x89, 0xb1, 0x9b,
-+	0xc1, 0xc3, 0x65, 0x87, 0xed, 0xa5, 0xf4, 0x86,
-+	0xfd, 0x41, 0x80, 0x91, 0x27, 0x59, 0x53, 0x67,
-+	0x15, 0x78, 0x54, 0x8b, 0x2d, 0x3d, 0xc7, 0xff,
-+	0x02, 0x92, 0x07, 0x5f, 0x7a, 0x4b, 0x60, 0x59,
-+	0x3c, 0x6f, 0x5c, 0xd8, 0xec, 0x95, 0xd2, 0xfe,
-+	0xa0, 0x3b, 0xd8, 0x3f, 0xd1, 0x69, 0xa6, 0xd6,
-+	0x41, 0xb2, 0xf4, 0x4d, 0x12, 0xf4, 0x58, 0x3e,
-+	0x66, 0x64, 0x80, 0x31, 0x9b, 0xa8, 0x4c, 0x8b,
-+	0x07, 0xb2, 0xec, 0x66, 0x94, 0x66, 0x47, 0x50,
-+	0x50, 0x5f, 0x18, 0x0b, 0x0e, 0xd6, 0xc0, 0x39,
-+	0x21, 0x13, 0x9e, 0x33, 0xbc, 0x79, 0x36, 0x02,
-+	0x96, 0x70, 0xf0, 0x48, 0x67, 0x2f, 0x26, 0xe9,
-+	0x6d, 0x10, 0xbb, 0xd6, 0x3f, 0xd1, 0x64, 0x7a,
-+	0x2e, 0xbe, 0x0c, 0x61, 0xf0, 0x75, 0x42, 0x38,
-+	0x23, 0xb1, 0x9e, 0x9f, 0x7c, 0x67, 0x66, 0xd9,
-+	0x58, 0x9a, 0xf1, 0xbb, 0x41, 0x2a, 0x8d, 0x65,
-+	0x84, 0x94, 0xfc, 0xdc, 0x6a, 0x50, 0x64, 0xdb,
-+	0x56, 0x33, 0x76, 0x00, 0x10, 0xed, 0xbe, 0xd2,
-+	0x12, 0xf6, 0xf6, 0x1b, 0xa2, 0x16, 0xde, 0xae,
-+	0x31, 0x95, 0xdd, 0xb1, 0x08, 0x7e, 0x4e, 0xee,
-+	0xe7, 0xf9, 0xa5, 0xfb, 0x5b, 0x61, 0x43, 0x00,
-+	0x40, 0xf6, 0x7e, 0x02, 0x04, 0x32, 0x4e, 0x0c,
-+	0xe2, 0x66, 0x0d, 0xd7, 0x07, 0x98, 0x0e, 0xf8,
-+	0x72, 0x34, 0x6d, 0x95, 0x86, 0xd7, 0xcb, 0x31,
-+	0x54, 0x47, 0xd0, 0x38, 0x29, 0x9c, 0x5a, 0x68,
-+	0xd4, 0x87, 0x76, 0xc9, 0xe7, 0x7e, 0xe3, 0xf4,
-+	0x81, 0x6d, 0x18, 0xcb, 0xc9, 0x05, 0xaf, 0xa0,
-+	0xfb, 0x66, 0xf7, 0xf1, 0x1c, 0xc6, 0x14, 0x11,
-+	0x4f, 0x2b, 0x79, 0x42, 0x8b, 0xbc, 0xac, 0xe7,
-+	0x6c, 0xfe, 0x0f, 0x58, 0xe7, 0x7c, 0x78, 0x39,
-+	0x30, 0xb0, 0x66, 0x2c, 0x9b, 0x6d, 0x3a, 0xe1,
-+	0xcf, 0xc9, 0xa4, 0x0e, 0x6d, 0x6d, 0x8a, 0xa1,
-+	0x3a, 0xe7, 0x28, 0xd4, 0x78, 0x4c, 0xa6, 0xa2,
-+	0x2a, 0xa6, 0x03, 0x30, 0xd7, 0xa8, 0x25, 0x66,
-+	0x87, 0x2f, 0x69, 0x5c, 0x4e, 0xdd, 0xa5, 0x49,
-+	0x5d, 0x37, 0x4a, 0x59, 0xc4, 0xaf, 0x1f, 0xa2,
-+	0xe4, 0xf8, 0xa6, 0x12, 0x97, 0xd5, 0x79, 0xf5,
-+	0xe2, 0x4a, 0x2b, 0x5f, 0x61, 0xe4, 0x9e, 0xe3,
-+	0xee, 0xb8, 0xa7, 0x5b, 0x2f, 0xf4, 0x9e, 0x6c,
-+	0xfb, 0xd1, 0xc6, 0x56, 0x77, 0xba, 0x75, 0xaa,
-+	0x3d, 0x1a, 0xa8, 0x0b, 0xb3, 0x68, 0x24, 0x00,
-+	0x10, 0x7f, 0xfd, 0xd7, 0xa1, 0x8d, 0x83, 0x54,
-+	0x4f, 0x1f, 0xd8, 0x2a, 0xbe, 0x8a, 0x0c, 0x87,
-+	0xab, 0xa2, 0xde, 0xc3, 0x39, 0xbf, 0x09, 0x03,
-+	0xa5, 0xf3, 0x05, 0x28, 0xe1, 0xe1, 0xee, 0x39,
-+	0x70, 0x9c, 0xd8, 0x81, 0x12, 0x1e, 0x02, 0x40,
-+	0xd2, 0x6e, 0xf0, 0xeb, 0x1b, 0x3d, 0x22, 0xc6,
-+	0xe5, 0xe3, 0xb4, 0x5a, 0x98, 0xbb, 0xf0, 0x22,
-+	0x28, 0x8d, 0xe5, 0xd3, 0x16, 0x48, 0x24, 0xa5,
-+	0xe6, 0x66, 0x0c, 0xf9, 0x08, 0xf9, 0x7e, 0x1e,
-+	0xe1, 0x28, 0x26, 0x22, 0xc7, 0xc7, 0x0a, 0x32,
-+	0x47, 0xfa, 0xa3, 0xbe, 0x3c, 0xc4, 0xc5, 0x53,
-+	0x0a, 0xd5, 0x94, 0x4a, 0xd7, 0x93, 0xd8, 0x42,
-+	0x99, 0xb9, 0x0a, 0xdb, 0x56, 0xf7, 0xb9, 0x1c,
-+	0x53, 0x4f, 0xfa, 0xd3, 0x74, 0xad, 0xd9, 0x68,
-+	0xf1, 0x1b, 0xdf, 0x61, 0xc6, 0x5e, 0xa8, 0x48,
-+	0xfc, 0xd4, 0x4a, 0x4c, 0x3c, 0x32, 0xf7, 0x1c,
-+	0x96, 0x21, 0x9b, 0xf9, 0xa3, 0xcc, 0x5a, 0xce,
-+	0xd5, 0xd7, 0x08, 0x24, 0xf6, 0x1c, 0xfd, 0xdd,
-+	0x38, 0xc2, 0x32, 0xe9, 0xb8, 0xe7, 0xb6, 0xfa,
-+	0x9d, 0x45, 0x13, 0x2c, 0x83, 0xfd, 0x4a, 0x69,
-+	0x82, 0xcd, 0xdc, 0xb3, 0x76, 0x0c, 0x9e, 0xd8,
-+	0xf4, 0x1b, 0x45, 0x15, 0xb4, 0x97, 0xe7, 0x58,
-+	0x34, 0xe2, 0x03, 0x29, 0x5a, 0xbf, 0xb6, 0xe0,
-+	0x5d, 0x13, 0xd9, 0x2b, 0xb4, 0x80, 0xb2, 0x45,
-+	0x81, 0x6a, 0x2e, 0x6c, 0x89, 0x7d, 0xee, 0xbb,
-+	0x52, 0xdd, 0x1f, 0x18, 0xe7, 0x13, 0x6b, 0x33,
-+	0x0e, 0xea, 0x36, 0x92, 0x77, 0x7b, 0x6d, 0x9c,
-+	0x5a, 0x5f, 0x45, 0x7b, 0x7b, 0x35, 0x62, 0x23,
-+	0xd1, 0xbf, 0x0f, 0xd0, 0x08, 0x1b, 0x2b, 0x80,
-+	0x6b, 0x7e, 0xf1, 0x21, 0x47, 0xb0, 0x57, 0xd1,
-+	0x98, 0x72, 0x90, 0x34, 0x1c, 0x20, 0x04, 0xff,
-+	0x3d, 0x5c, 0xee, 0x0e, 0x57, 0x5f, 0x6f, 0x24,
-+	0x4e, 0x3c, 0xea, 0xfc, 0xa5, 0xa9, 0x83, 0xc9,
-+	0x61, 0xb4, 0x51, 0x24, 0xf8, 0x27, 0x5e, 0x46,
-+	0x8c, 0xb1, 0x53, 0x02, 0x96, 0x35, 0xba, 0xb8,
-+	0x4c, 0x71, 0xd3, 0x15, 0x59, 0x35, 0x22, 0x20,
-+	0xad, 0x03, 0x9f, 0x66, 0x44, 0x3b, 0x9c, 0x35,
-+	0x37, 0x1f, 0x9b, 0xbb, 0xf3, 0xdb, 0x35, 0x63,
-+	0x30, 0x64, 0xaa, 0xa2, 0x06, 0xa8, 0x5d, 0xbb,
-+	0xe1, 0x9f, 0x70, 0xec, 0x82, 0x11, 0x06, 0x36,
-+	0xec, 0x8b, 0x69, 0x66, 0x24, 0x44, 0xc9, 0x4a,
-+	0x57, 0xbb, 0x9b, 0x78, 0x13, 0xce, 0x9c, 0x0c,
-+	0xba, 0x92, 0x93, 0x63, 0xb8, 0xe2, 0x95, 0x0f,
-+	0x0f, 0x16, 0x39, 0x52, 0xfd, 0x3a, 0x6d, 0x02,
-+	0x4b, 0xdf, 0x13, 0xd3, 0x2a, 0x22, 0xb4, 0x03,
-+	0x7c, 0x54, 0x49, 0x96, 0x68, 0x54, 0x10, 0xfa,
-+	0xef, 0xaa, 0x6c, 0xe8, 0x22, 0xdc, 0x71, 0x16,
-+	0x13, 0x1a, 0xf6, 0x28, 0xe5, 0x6d, 0x77, 0x3d,
-+	0xcd, 0x30, 0x63, 0xb1, 0x70, 0x52, 0xa1, 0xc5,
-+	0x94, 0x5f, 0xcf, 0xe8, 0xb8, 0x26, 0x98, 0xf7,
-+	0x06, 0xa0, 0x0a, 0x70, 0xfa, 0x03, 0x80, 0xac,
-+	0xc1, 0xec, 0xd6, 0x4c, 0x54, 0xd7, 0xfe, 0x47,
-+	0xb6, 0x88, 0x4a, 0xf7, 0x71, 0x24, 0xee, 0xf3,
-+	0xd2, 0xc2, 0x4a, 0x7f, 0xfe, 0x61, 0xc7, 0x35,
-+	0xc9, 0x37, 0x67, 0xcb, 0x24, 0x35, 0xda, 0x7e,
-+	0xca, 0x5f, 0xf3, 0x8d, 0xd4, 0x13, 0x8e, 0xd6,
-+	0xcb, 0x4d, 0x53, 0x8f, 0x53, 0x1f, 0xc0, 0x74,
-+	0xf7, 0x53, 0xb9, 0x5e, 0x23, 0x37, 0xba, 0x6e,
-+	0xe3, 0x9d, 0x07, 0x55, 0x25, 0x7b, 0xe6, 0x2a,
-+	0x64, 0xd1, 0x32, 0xdd, 0x54, 0x1b, 0x4b, 0xc0,
-+	0xe1, 0xd7, 0x69, 0x58, 0xf8, 0x93, 0x29, 0xc4,
-+	0xdd, 0x23, 0x2f, 0xa5, 0xfc, 0x9d, 0x7e, 0xf8,
-+	0xd4, 0x90, 0xcd, 0x82, 0x55, 0xdc, 0x16, 0x16,
-+	0x9f, 0x07, 0x52, 0x9b, 0x9d, 0x25, 0xed, 0x32,
-+	0xc5, 0x7b, 0xdf, 0xf6, 0x83, 0x46, 0x3d, 0x65,
-+	0xb7, 0xef, 0x87, 0x7a, 0x12, 0x69, 0x8f, 0x06,
-+	0x7c, 0x51, 0x15, 0x4a, 0x08, 0xe8, 0xac, 0x9a,
-+	0x0c, 0x24, 0xa7, 0x27, 0xd8, 0x46, 0x2f, 0xe7,
-+	0x01, 0x0e, 0x1c, 0xc6, 0x91, 0xb0, 0x6e, 0x85,
-+	0x65, 0xf0, 0x29, 0x0d, 0x2e, 0x6b, 0x3b, 0xfb,
-+	0x4b, 0xdf, 0xe4, 0x80, 0x93, 0x03, 0x66, 0x46,
-+	0x3e, 0x8a, 0x6e, 0xf3, 0x5e, 0x4d, 0x62, 0x0e,
-+	0x49, 0x05, 0xaf, 0xd4, 0xf8, 0x21, 0x20, 0x61,
-+	0x1d, 0x39, 0x17, 0xf4, 0x61, 0x47, 0x95, 0xfb,
-+	0x15, 0x2e, 0xb3, 0x4f, 0xd0, 0x5d, 0xf5, 0x7d,
-+	0x40, 0xda, 0x90, 0x3c, 0x6b, 0xcb, 0x17, 0x00,
-+	0x13, 0x3b, 0x64, 0x34, 0x1b, 0xf0, 0xf2, 0xe5,
-+	0x3b, 0xb2, 0xc7, 0xd3, 0x5f, 0x3a, 0x44, 0xa6,
-+	0x9b, 0xb7, 0x78, 0x0e, 0x42, 0x5d, 0x4c, 0xc1,
-+	0xe9, 0xd2, 0xcb, 0xb7, 0x78, 0xd1, 0xfe, 0x9a,
-+	0xb5, 0x07, 0xe9, 0xe0, 0xbe, 0xe2, 0x8a, 0xa7,
-+	0x01, 0x83, 0x00, 0x8c, 0x5c, 0x08, 0xe6, 0x63,
-+	0x12, 0x92, 0xb7, 0xb7, 0xa6, 0x19, 0x7d, 0x38,
-+	0x13, 0x38, 0x92, 0x87, 0x24, 0xf9, 0x48, 0xb3,
-+	0x5e, 0x87, 0x6a, 0x40, 0x39, 0x5c, 0x3f, 0xed,
-+	0x8f, 0xee, 0xdb, 0x15, 0x82, 0x06, 0xda, 0x49,
-+	0x21, 0x2b, 0xb5, 0xbf, 0x32, 0x7c, 0x9f, 0x42,
-+	0x28, 0x63, 0xcf, 0xaf, 0x1e, 0xf8, 0xc6, 0xa0,
-+	0xd1, 0x02, 0x43, 0x57, 0x62, 0xec, 0x9b, 0x0f,
-+	0x01, 0x9e, 0x71, 0xd8, 0x87, 0x9d, 0x01, 0xc1,
-+	0x58, 0x77, 0xd9, 0xaf, 0xb1, 0x10, 0x7e, 0xdd,
-+	0xa6, 0x50, 0x96, 0xe5, 0xf0, 0x72, 0x00, 0x6d,
-+	0x4b, 0xf8, 0x2a, 0x8f, 0x19, 0xf3, 0x22, 0x88,
-+	0x11, 0x4a, 0x8b, 0x7c, 0xfd, 0xb7, 0xed, 0xe1,
-+	0xf6, 0x40, 0x39, 0xe0, 0xe9, 0xf6, 0x3d, 0x25,
-+	0xe6, 0x74, 0x3c, 0x58, 0x57, 0x7f, 0xe1, 0x22,
-+	0x96, 0x47, 0x31, 0x91, 0xba, 0x70, 0x85, 0x28,
-+	0x6b, 0x9f, 0x6e, 0x25, 0xac, 0x23, 0x66, 0x2f,
-+	0x29, 0x88, 0x28, 0xce, 0x8c, 0x5c, 0x88, 0x53,
-+	0xd1, 0x3b, 0xcc, 0x6a, 0x51, 0xb2, 0xe1, 0x28,
-+	0x3f, 0x91, 0xb4, 0x0d, 0x00, 0x3a, 0xe3, 0xf8,
-+	0xc3, 0x8f, 0xd7, 0x96, 0x62, 0x0e, 0x2e, 0xfc,
-+	0xc8, 0x6c, 0x77, 0xa6, 0x1d, 0x22, 0xc1, 0xb8,
-+	0xe6, 0x61, 0xd7, 0x67, 0x36, 0x13, 0x7b, 0xbb,
-+	0x9b, 0x59, 0x09, 0xa6, 0xdf, 0xf7, 0x6b, 0xa3,
-+	0x40, 0x1a, 0xf5, 0x4f, 0xb4, 0xda, 0xd3, 0xf3,
-+	0x81, 0x93, 0xc6, 0x18, 0xd9, 0x26, 0xee, 0xac,
-+	0xf0, 0xaa, 0xdf, 0xc5, 0x9c, 0xca, 0xc2, 0xa2,
-+	0xcc, 0x7b, 0x5c, 0x24, 0xb0, 0xbc, 0xd0, 0x6a,
-+	0x4d, 0x89, 0x09, 0xb8, 0x07, 0xfe, 0x87, 0xad,
-+	0x0a, 0xea, 0xb8, 0x42, 0xf9, 0x5e, 0xb3, 0x3e,
-+	0x36, 0x4c, 0xaf, 0x75, 0x9e, 0x1c, 0xeb, 0xbd,
-+	0xbc, 0xbb, 0x80, 0x40, 0xa7, 0x3a, 0x30, 0xbf,
-+	0xa8, 0x44, 0xf4, 0xeb, 0x38, 0xad, 0x29, 0xba,
-+	0x23, 0xed, 0x41, 0x0c, 0xea, 0xd2, 0xbb, 0x41,
-+	0x18, 0xd6, 0xb9, 0xba, 0x65, 0x2b, 0xa3, 0x91,
-+	0x6d, 0x1f, 0xa9, 0xf4, 0xd1, 0x25, 0x8d, 0x4d,
-+	0x38, 0xff, 0x64, 0xa0, 0xec, 0xde, 0xa6, 0xb6,
-+	0x79, 0xab, 0x8e, 0x33, 0x6c, 0x47, 0xde, 0xaf,
-+	0x94, 0xa4, 0xa5, 0x86, 0x77, 0x55, 0x09, 0x92,
-+	0x81, 0x31, 0x76, 0xc7, 0x34, 0x22, 0x89, 0x8e,
-+	0x3d, 0x26, 0x26, 0xd7, 0xfc, 0x1e, 0x16, 0x72,
-+	0x13, 0x33, 0x63, 0xd5, 0x22, 0xbe, 0xb8, 0x04,
-+	0x34, 0x84, 0x41, 0xbb, 0x80, 0xd0, 0x9f, 0x46,
-+	0x48, 0x07, 0xa7, 0xfc, 0x2b, 0x3a, 0x75, 0x55,
-+	0x8c, 0xc7, 0x6a, 0xbd, 0x7e, 0x46, 0x08, 0x84,
-+	0x0f, 0xd5, 0x74, 0xc0, 0x82, 0x8e, 0xaa, 0x61,
-+	0x05, 0x01, 0xb2, 0x47, 0x6e, 0x20, 0x6a, 0x2d,
-+	0x58, 0x70, 0x48, 0x32, 0xa7, 0x37, 0xd2, 0xb8,
-+	0x82, 0x1a, 0x51, 0xb9, 0x61, 0xdd, 0xfd, 0x9d,
-+	0x6b, 0x0e, 0x18, 0x97, 0xf8, 0x45, 0x5f, 0x87,
-+	0x10, 0xcf, 0x34, 0x72, 0x45, 0x26, 0x49, 0x70,
-+	0xe7, 0xa3, 0x78, 0xe0, 0x52, 0x89, 0x84, 0x94,
-+	0x83, 0x82, 0xc2, 0x69, 0x8f, 0xe3, 0xe1, 0x3f,
-+	0x60, 0x74, 0x88, 0xc4, 0xf7, 0x75, 0x2c, 0xfb,
-+	0xbd, 0xb6, 0xc4, 0x7e, 0x10, 0x0a, 0x6c, 0x90,
-+	0x04, 0x9e, 0xc3, 0x3f, 0x59, 0x7c, 0xce, 0x31,
-+	0x18, 0x60, 0x57, 0x73, 0x46, 0x94, 0x7d, 0x06,
-+	0xa0, 0x6d, 0x44, 0xec, 0xa2, 0x0a, 0x9e, 0x05,
-+	0x15, 0xef, 0xca, 0x5c, 0xbf, 0x00, 0xeb, 0xf7,
-+	0x3d, 0x32, 0xd4, 0xa5, 0xef, 0x49, 0x89, 0x5e,
-+	0x46, 0xb0, 0xa6, 0x63, 0x5b, 0x8a, 0x73, 0xae,
-+	0x6f, 0xd5, 0x9d, 0xf8, 0x4f, 0x40, 0xb5, 0xb2,
-+	0x6e, 0xd3, 0xb6, 0x01, 0xa9, 0x26, 0xa2, 0x21,
-+	0xcf, 0x33, 0x7a, 0x3a, 0xa4, 0x23, 0x13, 0xb0,
-+	0x69, 0x6a, 0xee, 0xce, 0xd8, 0x9d, 0x01, 0x1d,
-+	0x50, 0xc1, 0x30, 0x6c, 0xb1, 0xcd, 0xa0, 0xf0,
-+	0xf0, 0xa2, 0x64, 0x6f, 0xbb, 0xbf, 0x5e, 0xe6,
-+	0xab, 0x87, 0xb4, 0x0f, 0x4f, 0x15, 0xaf, 0xb5,
-+	0x25, 0xa1, 0xb2, 0xd0, 0x80, 0x2c, 0xfb, 0xf9,
-+	0xfe, 0xd2, 0x33, 0xbb, 0x76, 0xfe, 0x7c, 0xa8,
-+	0x66, 0xf7, 0xe7, 0x85, 0x9f, 0x1f, 0x85, 0x57,
-+	0x88, 0xe1, 0xe9, 0x63, 0xe4, 0xd8, 0x1c, 0xa1,
-+	0xfb, 0xda, 0x44, 0x05, 0x2e, 0x1d, 0x3a, 0x1c,
-+	0xff, 0xc8, 0x3b, 0xc0, 0xfe, 0xda, 0x22, 0x0b,
-+	0x43, 0xd6, 0x88, 0x39, 0x4c, 0x4a, 0xa6, 0x69,
-+	0x18, 0x93, 0x42, 0x4e, 0xb5, 0xcc, 0x66, 0x0d,
-+	0x09, 0xf8, 0x1e, 0x7c, 0xd3, 0x3c, 0x99, 0x0d,
-+	0x50, 0x1d, 0x62, 0xe9, 0x57, 0x06, 0xbf, 0x19,
-+	0x88, 0xdd, 0xad, 0x7b, 0x4f, 0xf9, 0xc7, 0x82,
-+	0x6d, 0x8d, 0xc8, 0xc4, 0xc5, 0x78, 0x17, 0x20,
-+	0x15, 0xc5, 0x52, 0x41, 0xcf, 0x5b, 0xd6, 0x7f,
-+	0x94, 0x02, 0x41, 0xe0, 0x40, 0x22, 0x03, 0x5e,
-+	0xd1, 0x53, 0xd4, 0x86, 0xd3, 0x2c, 0x9f, 0x0f,
-+	0x96, 0xe3, 0x6b, 0x9a, 0x76, 0x32, 0x06, 0x47,
-+	0x4b, 0x11, 0xb3, 0xdd, 0x03, 0x65, 0xbd, 0x9b,
-+	0x01, 0xda, 0x9c, 0xb9, 0x7e, 0x3f, 0x6a, 0xc4,
-+	0x7b, 0xea, 0xd4, 0x3c, 0xb9, 0xfb, 0x5c, 0x6b,
-+	0x64, 0x33, 0x52, 0xba, 0x64, 0x78, 0x8f, 0xa4,
-+	0xaf, 0x7a, 0x61, 0x8d, 0xbc, 0xc5, 0x73, 0xe9,
-+	0x6b, 0x58, 0x97, 0x4b, 0xbf, 0x63, 0x22, 0xd3,
-+	0x37, 0x02, 0x54, 0xc5, 0xb9, 0x16, 0x4a, 0xf0,
-+	0x19, 0xd8, 0x94, 0x57, 0xb8, 0x8a, 0xb3, 0x16,
-+	0x3b, 0xd0, 0x84, 0x8e, 0x67, 0xa6, 0xa3, 0x7d,
-+	0x78, 0xec, 0x00
-+};
-+static const u8 dec_assoc012[] __initconst = {
-+	0xb1, 0x69, 0x83, 0x87, 0x30, 0xaa, 0x5d, 0xb8,
-+	0x77, 0xe8, 0x21, 0xff, 0x06, 0x59, 0x35, 0xce,
-+	0x75, 0xfe, 0x38, 0xef, 0xb8, 0x91, 0x43, 0x8c,
-+	0xcf, 0x70, 0xdd, 0x0a, 0x68, 0xbf, 0xd4, 0xbc,
-+	0x16, 0x76, 0x99, 0x36, 0x1e, 0x58, 0x79, 0x5e,
-+	0xd4, 0x29, 0xf7, 0x33, 0x93, 0x48, 0xdb, 0x5f,
-+	0x01, 0xae, 0x9c, 0xb6, 0xe4, 0x88, 0x6d, 0x2b,
-+	0x76, 0x75, 0xe0, 0xf3, 0x74, 0xe2, 0xc9
-+};
-+static const u8 dec_nonce012[] __initconst = {
-+	0x05, 0xa3, 0x93, 0xed, 0x30, 0xc5, 0xa2, 0x06
-+};
-+static const u8 dec_key012[] __initconst = {
-+	0xb3, 0x35, 0x50, 0x03, 0x54, 0x2e, 0x40, 0x5e,
-+	0x8f, 0x59, 0x8e, 0xc5, 0x90, 0xd5, 0x27, 0x2d,
-+	0xba, 0x29, 0x2e, 0xcb, 0x1b, 0x70, 0x44, 0x1e,
-+	0x65, 0x91, 0x6e, 0x2a, 0x79, 0x22, 0xda, 0x64
-+};
-+
-+static const u8 dec_input013[] __initconst = {
-+	0x52, 0x34, 0xb3, 0x65, 0x3b, 0xb7, 0xe5, 0xd3,
-+	0xab, 0x49, 0x17, 0x60, 0xd2, 0x52, 0x56, 0xdf,
-+	0xdf, 0x34, 0x56, 0x82, 0xe2, 0xbe, 0xe5, 0xe1,
-+	0x28, 0xd1, 0x4e, 0x5f, 0x4f, 0x01, 0x7d, 0x3f,
-+	0x99, 0x6b, 0x30, 0x6e, 0x1a, 0x7c, 0x4c, 0x8e,
-+	0x62, 0x81, 0xae, 0x86, 0x3f, 0x6b, 0xd0, 0xb5,
-+	0xa9, 0xcf, 0x50, 0xf1, 0x02, 0x12, 0xa0, 0x0b,
-+	0x24, 0xe9, 0xe6, 0x72, 0x89, 0x2c, 0x52, 0x1b,
-+	0x34, 0x38, 0xf8, 0x75, 0x5f, 0xa0, 0x74, 0xe2,
-+	0x99, 0xdd, 0xa6, 0x4b, 0x14, 0x50, 0x4e, 0xf1,
-+	0xbe, 0xd6, 0x9e, 0xdb, 0xb2, 0x24, 0x27, 0x74,
-+	0x12, 0x4a, 0x78, 0x78, 0x17, 0xa5, 0x58, 0x8e,
-+	0x2f, 0xf9, 0xf4, 0x8d, 0xee, 0x03, 0x88, 0xae,
-+	0xb8, 0x29, 0xa1, 0x2f, 0x4b, 0xee, 0x92, 0xbd,
-+	0x87, 0xb3, 0xce, 0x34, 0x21, 0x57, 0x46, 0x04,
-+	0x49, 0x0c, 0x80, 0xf2, 0x01, 0x13, 0xa1, 0x55,
-+	0xb3, 0xff, 0x44, 0x30, 0x3c, 0x1c, 0xd0, 0xef,
-+	0xbc, 0x18, 0x74, 0x26, 0xad, 0x41, 0x5b, 0x5b,
-+	0x3e, 0x9a, 0x7a, 0x46, 0x4f, 0x16, 0xd6, 0x74,
-+	0x5a, 0xb7, 0x3a, 0x28, 0x31, 0xd8, 0xae, 0x26,
-+	0xac, 0x50, 0x53, 0x86, 0xf2, 0x56, 0xd7, 0x3f,
-+	0x29, 0xbc, 0x45, 0x68, 0x8e, 0xcb, 0x98, 0x64,
-+	0xdd, 0xc9, 0xba, 0xb8, 0x4b, 0x7b, 0x82, 0xdd,
-+	0x14, 0xa7, 0xcb, 0x71, 0x72, 0x00, 0x5c, 0xad,
-+	0x7b, 0x6a, 0x89, 0xa4, 0x3d, 0xbf, 0xb5, 0x4b,
-+	0x3e, 0x7c, 0x5a, 0xcf, 0xb8, 0xa1, 0xc5, 0x6e,
-+	0xc8, 0xb6, 0x31, 0x57, 0x7b, 0xdf, 0xa5, 0x7e,
-+	0xb1, 0xd6, 0x42, 0x2a, 0x31, 0x36, 0xd1, 0xd0,
-+	0x3f, 0x7a, 0xe5, 0x94, 0xd6, 0x36, 0xa0, 0x6f,
-+	0xb7, 0x40, 0x7d, 0x37, 0xc6, 0x55, 0x7c, 0x50,
-+	0x40, 0x6d, 0x29, 0x89, 0xe3, 0x5a, 0xae, 0x97,
-+	0xe7, 0x44, 0x49, 0x6e, 0xbd, 0x81, 0x3d, 0x03,
-+	0x93, 0x06, 0x12, 0x06, 0xe2, 0x41, 0x12, 0x4a,
-+	0xf1, 0x6a, 0xa4, 0x58, 0xa2, 0xfb, 0xd2, 0x15,
-+	0xba, 0xc9, 0x79, 0xc9, 0xce, 0x5e, 0x13, 0xbb,
-+	0xf1, 0x09, 0x04, 0xcc, 0xfd, 0xe8, 0x51, 0x34,
-+	0x6a, 0xe8, 0x61, 0x88, 0xda, 0xed, 0x01, 0x47,
-+	0x84, 0xf5, 0x73, 0x25, 0xf9, 0x1c, 0x42, 0x86,
-+	0x07, 0xf3, 0x5b, 0x1a, 0x01, 0xb3, 0xeb, 0x24,
-+	0x32, 0x8d, 0xf6, 0xed, 0x7c, 0x4b, 0xeb, 0x3c,
-+	0x36, 0x42, 0x28, 0xdf, 0xdf, 0xb6, 0xbe, 0xd9,
-+	0x8c, 0x52, 0xd3, 0x2b, 0x08, 0x90, 0x8c, 0xe7,
-+	0x98, 0x31, 0xe2, 0x32, 0x8e, 0xfc, 0x11, 0x48,
-+	0x00, 0xa8, 0x6a, 0x42, 0x4a, 0x02, 0xc6, 0x4b,
-+	0x09, 0xf1, 0xe3, 0x49, 0xf3, 0x45, 0x1f, 0x0e,
-+	0xbc, 0x56, 0xe2, 0xe4, 0xdf, 0xfb, 0xeb, 0x61,
-+	0xfa, 0x24, 0xc1, 0x63, 0x75, 0xbb, 0x47, 0x75,
-+	0xaf, 0xe1, 0x53, 0x16, 0x96, 0x21, 0x85, 0x26,
-+	0x11, 0xb3, 0x76, 0xe3, 0x23, 0xa1, 0x6b, 0x74,
-+	0x37, 0xd0, 0xde, 0x06, 0x90, 0x71, 0x5d, 0x43,
-+	0x88, 0x9b, 0x00, 0x54, 0xa6, 0x75, 0x2f, 0xa1,
-+	0xc2, 0x0b, 0x73, 0x20, 0x1d, 0xb6, 0x21, 0x79,
-+	0x57, 0x3f, 0xfa, 0x09, 0xbe, 0x8a, 0x33, 0xc3,
-+	0x52, 0xf0, 0x1d, 0x82, 0x31, 0xd1, 0x55, 0xb5,
-+	0x6c, 0x99, 0x25, 0xcf, 0x5c, 0x32, 0xce, 0xe9,
-+	0x0d, 0xfa, 0x69, 0x2c, 0xd5, 0x0d, 0xc5, 0x6d,
-+	0x86, 0xd0, 0x0c, 0x3b, 0x06, 0x50, 0x79, 0xe8,
-+	0xc3, 0xae, 0x04, 0xe6, 0xcd, 0x51, 0xe4, 0x26,
-+	0x9b, 0x4f, 0x7e, 0xa6, 0x0f, 0xab, 0xd8, 0xe5,
-+	0xde, 0xa9, 0x00, 0x95, 0xbe, 0xa3, 0x9d, 0x5d,
-+	0xb2, 0x09, 0x70, 0x18, 0x1c, 0xf0, 0xac, 0x29,
-+	0x23, 0x02, 0x29, 0x28, 0xd2, 0x74, 0x35, 0x57,
-+	0x62, 0x0f, 0x24, 0xea, 0x5e, 0x33, 0xc2, 0x92,
-+	0xf3, 0x78, 0x4d, 0x30, 0x1e, 0xa1, 0x99, 0xa9,
-+	0x82, 0xb0, 0x42, 0x31, 0x8d, 0xad, 0x8a, 0xbc,
-+	0xfc, 0xd4, 0x57, 0x47, 0x3e, 0xb4, 0x50, 0xdd,
-+	0x6e, 0x2c, 0x80, 0x4d, 0x22, 0xf1, 0xfb, 0x57,
-+	0xc4, 0xdd, 0x17, 0xe1, 0x8a, 0x36, 0x4a, 0xb3,
-+	0x37, 0xca, 0xc9, 0x4e, 0xab, 0xd5, 0x69, 0xc4,
-+	0xf4, 0xbc, 0x0b, 0x3b, 0x44, 0x4b, 0x29, 0x9c,
-+	0xee, 0xd4, 0x35, 0x22, 0x21, 0xb0, 0x1f, 0x27,
-+	0x64, 0xa8, 0x51, 0x1b, 0xf0, 0x9f, 0x19, 0x5c,
-+	0xfb, 0x5a, 0x64, 0x74, 0x70, 0x45, 0x09, 0xf5,
-+	0x64, 0xfe, 0x1a, 0x2d, 0xc9, 0x14, 0x04, 0x14,
-+	0xcf, 0xd5, 0x7d, 0x60, 0xaf, 0x94, 0x39, 0x94,
-+	0xe2, 0x7d, 0x79, 0x82, 0xd0, 0x65, 0x3b, 0x6b,
-+	0x9c, 0x19, 0x84, 0xb4, 0x6d, 0xb3, 0x0c, 0x99,
-+	0xc0, 0x56, 0xa8, 0xbd, 0x73, 0xce, 0x05, 0x84,
-+	0x3e, 0x30, 0xaa, 0xc4, 0x9b, 0x1b, 0x04, 0x2a,
-+	0x9f, 0xd7, 0x43, 0x2b, 0x23, 0xdf, 0xbf, 0xaa,
-+	0xd5, 0xc2, 0x43, 0x2d, 0x70, 0xab, 0xdc, 0x75,
-+	0xad, 0xac, 0xf7, 0xc0, 0xbe, 0x67, 0xb2, 0x74,
-+	0xed, 0x67, 0x10, 0x4a, 0x92, 0x60, 0xc1, 0x40,
-+	0x50, 0x19, 0x8a, 0x8a, 0x8c, 0x09, 0x0e, 0x72,
-+	0xe1, 0x73, 0x5e, 0xe8, 0x41, 0x85, 0x63, 0x9f,
-+	0x3f, 0xd7, 0x7d, 0xc4, 0xfb, 0x22, 0x5d, 0x92,
-+	0x6c, 0xb3, 0x1e, 0xe2, 0x50, 0x2f, 0x82, 0xa8,
-+	0x28, 0xc0, 0xb5, 0xd7, 0x5f, 0x68, 0x0d, 0x2c,
-+	0x2d, 0xaf, 0x7e, 0xfa, 0x2e, 0x08, 0x0f, 0x1f,
-+	0x70, 0x9f, 0xe9, 0x19, 0x72, 0x55, 0xf8, 0xfb,
-+	0x51, 0xd2, 0x33, 0x5d, 0xa0, 0xd3, 0x2b, 0x0a,
-+	0x6c, 0xbc, 0x4e, 0xcf, 0x36, 0x4d, 0xdc, 0x3b,
-+	0xe9, 0x3e, 0x81, 0x7c, 0x61, 0xdb, 0x20, 0x2d,
-+	0x3a, 0xc3, 0xb3, 0x0c, 0x1e, 0x00, 0xb9, 0x7c,
-+	0xf5, 0xca, 0x10, 0x5f, 0x3a, 0x71, 0xb3, 0xe4,
-+	0x20, 0xdb, 0x0c, 0x2a, 0x98, 0x63, 0x45, 0x00,
-+	0x58, 0xf6, 0x68, 0xe4, 0x0b, 0xda, 0x13, 0x3b,
-+	0x60, 0x5c, 0x76, 0xdb, 0xb9, 0x97, 0x71, 0xe4,
-+	0xd9, 0xb7, 0xdb, 0xbd, 0x68, 0xc7, 0x84, 0x84,
-+	0xaa, 0x7c, 0x68, 0x62, 0x5e, 0x16, 0xfc, 0xba,
-+	0x72, 0xaa, 0x9a, 0xa9, 0xeb, 0x7c, 0x75, 0x47,
-+	0x97, 0x7e, 0xad, 0xe2, 0xd9, 0x91, 0xe8, 0xe4,
-+	0xa5, 0x31, 0xd7, 0x01, 0x8e, 0xa2, 0x11, 0x88,
-+	0x95, 0xb9, 0xf2, 0x9b, 0xd3, 0x7f, 0x1b, 0x81,
-+	0x22, 0xf7, 0x98, 0x60, 0x0a, 0x64, 0xa6, 0xc1,
-+	0xf6, 0x49, 0xc7, 0xe3, 0x07, 0x4d, 0x94, 0x7a,
-+	0xcf, 0x6e, 0x68, 0x0c, 0x1b, 0x3f, 0x6e, 0x2e,
-+	0xee, 0x92, 0xfa, 0x52, 0xb3, 0x59, 0xf8, 0xf1,
-+	0x8f, 0x6a, 0x66, 0xa3, 0x82, 0x76, 0x4a, 0x07,
-+	0x1a, 0xc7, 0xdd, 0xf5, 0xda, 0x9c, 0x3c, 0x24,
-+	0xbf, 0xfd, 0x42, 0xa1, 0x10, 0x64, 0x6a, 0x0f,
-+	0x89, 0xee, 0x36, 0xa5, 0xce, 0x99, 0x48, 0x6a,
-+	0xf0, 0x9f, 0x9e, 0x69, 0xa4, 0x40, 0x20, 0xe9,
-+	0x16, 0x15, 0xf7, 0xdb, 0x75, 0x02, 0xcb, 0xe9,
-+	0x73, 0x8b, 0x3b, 0x49, 0x2f, 0xf0, 0xaf, 0x51,
-+	0x06, 0x5c, 0xdf, 0x27, 0x27, 0x49, 0x6a, 0xd1,
-+	0xcc, 0xc7, 0xb5, 0x63, 0xb5, 0xfc, 0xb8, 0x5c,
-+	0x87, 0x7f, 0x84, 0xb4, 0xcc, 0x14, 0xa9, 0x53,
-+	0xda, 0xa4, 0x56, 0xf8, 0xb6, 0x1b, 0xcc, 0x40,
-+	0x27, 0x52, 0x06, 0x5a, 0x13, 0x81, 0xd7, 0x3a,
-+	0xd4, 0x3b, 0xfb, 0x49, 0x65, 0x31, 0x33, 0xb2,
-+	0xfa, 0xcd, 0xad, 0x58, 0x4e, 0x2b, 0xae, 0xd2,
-+	0x20, 0xfb, 0x1a, 0x48, 0xb4, 0x3f, 0x9a, 0xd8,
-+	0x7a, 0x35, 0x4a, 0xc8, 0xee, 0x88, 0x5e, 0x07,
-+	0x66, 0x54, 0xb9, 0xec, 0x9f, 0xa3, 0xe3, 0xb9,
-+	0x37, 0xaa, 0x49, 0x76, 0x31, 0xda, 0x74, 0x2d,
-+	0x3c, 0xa4, 0x65, 0x10, 0x32, 0x38, 0xf0, 0xde,
-+	0xd3, 0x99, 0x17, 0xaa, 0x71, 0xaa, 0x8f, 0x0f,
-+	0x8c, 0xaf, 0xa2, 0xf8, 0x5d, 0x64, 0xba, 0x1d,
-+	0xa3, 0xef, 0x96, 0x73, 0xe8, 0xa1, 0x02, 0x8d,
-+	0x0c, 0x6d, 0xb8, 0x06, 0x90, 0xb8, 0x08, 0x56,
-+	0x2c, 0xa7, 0x06, 0xc9, 0xc2, 0x38, 0xdb, 0x7c,
-+	0x63, 0xb1, 0x57, 0x8e, 0xea, 0x7c, 0x79, 0xf3,
-+	0x49, 0x1d, 0xfe, 0x9f, 0xf3, 0x6e, 0xb1, 0x1d,
-+	0xba, 0x19, 0x80, 0x1a, 0x0a, 0xd3, 0xb0, 0x26,
-+	0x21, 0x40, 0xb1, 0x7c, 0xf9, 0x4d, 0x8d, 0x10,
-+	0xc1, 0x7e, 0xf4, 0xf6, 0x3c, 0xa8, 0xfd, 0x7c,
-+	0xa3, 0x92, 0xb2, 0x0f, 0xaa, 0xcc, 0xa6, 0x11,
-+	0xfe, 0x04, 0xe3, 0xd1, 0x7a, 0x32, 0x89, 0xdf,
-+	0x0d, 0xc4, 0x8f, 0x79, 0x6b, 0xca, 0x16, 0x7c,
-+	0x6e, 0xf9, 0xad, 0x0f, 0xf6, 0xfe, 0x27, 0xdb,
-+	0xc4, 0x13, 0x70, 0xf1, 0x62, 0x1a, 0x4f, 0x79,
-+	0x40, 0xc9, 0x9b, 0x8b, 0x21, 0xea, 0x84, 0xfa,
-+	0xf5, 0xf1, 0x89, 0xce, 0xb7, 0x55, 0x0a, 0x80,
-+	0x39, 0x2f, 0x55, 0x36, 0x16, 0x9c, 0x7b, 0x08,
-+	0xbd, 0x87, 0x0d, 0xa5, 0x32, 0xf1, 0x52, 0x7c,
-+	0xe8, 0x55, 0x60, 0x5b, 0xd7, 0x69, 0xe4, 0xfc,
-+	0xfa, 0x12, 0x85, 0x96, 0xea, 0x50, 0x28, 0xab,
-+	0x8a, 0xf7, 0xbb, 0x0e, 0x53, 0x74, 0xca, 0xa6,
-+	0x27, 0x09, 0xc2, 0xb5, 0xde, 0x18, 0x14, 0xd9,
-+	0xea, 0xe5, 0x29, 0x1c, 0x40, 0x56, 0xcf, 0xd7,
-+	0xae, 0x05, 0x3f, 0x65, 0xaf, 0x05, 0x73, 0xe2,
-+	0x35, 0x96, 0x27, 0x07, 0x14, 0xc0, 0xad, 0x33,
-+	0xf1, 0xdc, 0x44, 0x7a, 0x89, 0x17, 0x77, 0xd2,
-+	0x9c, 0x58, 0x60, 0xf0, 0x3f, 0x7b, 0x2d, 0x2e,
-+	0x57, 0x95, 0x54, 0x87, 0xed, 0xf2, 0xc7, 0x4c,
-+	0xf0, 0xae, 0x56, 0x29, 0x19, 0x7d, 0x66, 0x4b,
-+	0x9b, 0x83, 0x84, 0x42, 0x3b, 0x01, 0x25, 0x66,
-+	0x8e, 0x02, 0xde, 0xb9, 0x83, 0x54, 0x19, 0xf6,
-+	0x9f, 0x79, 0x0d, 0x67, 0xc5, 0x1d, 0x7a, 0x44,
-+	0x02, 0x98, 0xa7, 0x16, 0x1c, 0x29, 0x0d, 0x74,
-+	0xff, 0x85, 0x40, 0x06, 0xef, 0x2c, 0xa9, 0xc6,
-+	0xf5, 0x53, 0x07, 0x06, 0xae, 0xe4, 0xfa, 0x5f,
-+	0xd8, 0x39, 0x4d, 0xf1, 0x9b, 0x6b, 0xd9, 0x24,
-+	0x84, 0xfe, 0x03, 0x4c, 0xb2, 0x3f, 0xdf, 0xa1,
-+	0x05, 0x9e, 0x50, 0x14, 0x5a, 0xd9, 0x1a, 0xa2,
-+	0xa7, 0xfa, 0xfa, 0x17, 0xf7, 0x78, 0xd6, 0xb5,
-+	0x92, 0x61, 0x91, 0xac, 0x36, 0xfa, 0x56, 0x0d,
-+	0x38, 0x32, 0x18, 0x85, 0x08, 0x58, 0x37, 0xf0,
-+	0x4b, 0xdb, 0x59, 0xe7, 0xa4, 0x34, 0xc0, 0x1b,
-+	0x01, 0xaf, 0x2d, 0xde, 0xa1, 0xaa, 0x5d, 0xd3,
-+	0xec, 0xe1, 0xd4, 0xf7, 0xe6, 0x54, 0x68, 0xf0,
-+	0x51, 0x97, 0xa7, 0x89, 0xea, 0x24, 0xad, 0xd3,
-+	0x6e, 0x47, 0x93, 0x8b, 0x4b, 0xb4, 0xf7, 0x1c,
-+	0x42, 0x06, 0x67, 0xe8, 0x99, 0xf6, 0xf5, 0x7b,
-+	0x85, 0xb5, 0x65, 0xb5, 0xb5, 0xd2, 0x37, 0xf5,
-+	0xf3, 0x02, 0xa6, 0x4d, 0x11, 0xa7, 0xdc, 0x51,
-+	0x09, 0x7f, 0xa0, 0xd8, 0x88, 0x1c, 0x13, 0x71,
-+	0xae, 0x9c, 0xb7, 0x7b, 0x34, 0xd6, 0x4e, 0x68,
-+	0x26, 0x83, 0x51, 0xaf, 0x1d, 0xee, 0x8b, 0xbb,
-+	0x69, 0x43, 0x2b, 0x9e, 0x8a, 0xbc, 0x02, 0x0e,
-+	0xa0, 0x1b, 0xe0, 0xa8, 0x5f, 0x6f, 0xaf, 0x1b,
-+	0x8f, 0xe7, 0x64, 0x71, 0x74, 0x11, 0x7e, 0xa8,
-+	0xd8, 0xf9, 0x97, 0x06, 0xc3, 0xb6, 0xfb, 0xfb,
-+	0xb7, 0x3d, 0x35, 0x9d, 0x3b, 0x52, 0xed, 0x54,
-+	0xca, 0xf4, 0x81, 0x01, 0x2d, 0x1b, 0xc3, 0xa7,
-+	0x00, 0x3d, 0x1a, 0x39, 0x54, 0xe1, 0xf6, 0xff,
-+	0xed, 0x6f, 0x0b, 0x5a, 0x68, 0xda, 0x58, 0xdd,
-+	0xa9, 0xcf, 0x5c, 0x4a, 0xe5, 0x09, 0x4e, 0xde,
-+	0x9d, 0xbc, 0x3e, 0xee, 0x5a, 0x00, 0x3b, 0x2c,
-+	0x87, 0x10, 0x65, 0x60, 0xdd, 0xd7, 0x56, 0xd1,
-+	0x4c, 0x64, 0x45, 0xe4, 0x21, 0xec, 0x78, 0xf8,
-+	0x25, 0x7a, 0x3e, 0x16, 0x5d, 0x09, 0x53, 0x14,
-+	0xbe, 0x4f, 0xae, 0x87, 0xd8, 0xd1, 0xaa, 0x3c,
-+	0xf6, 0x3e, 0xa4, 0x70, 0x8c, 0x5e, 0x70, 0xa4,
-+	0xb3, 0x6b, 0x66, 0x73, 0xd3, 0xbf, 0x31, 0x06,
-+	0x19, 0x62, 0x93, 0x15, 0xf2, 0x86, 0xe4, 0x52,
-+	0x7e, 0x53, 0x4c, 0x12, 0x38, 0xcc, 0x34, 0x7d,
-+	0x57, 0xf6, 0x42, 0x93, 0x8a, 0xc4, 0xee, 0x5c,
-+	0x8a, 0xe1, 0x52, 0x8f, 0x56, 0x64, 0xf6, 0xa6,
-+	0xd1, 0x91, 0x57, 0x70, 0xcd, 0x11, 0x76, 0xf5,
-+	0x59, 0x60, 0x60, 0x3c, 0xc1, 0xc3, 0x0b, 0x7f,
-+	0x58, 0x1a, 0x50, 0x91, 0xf1, 0x68, 0x8f, 0x6e,
-+	0x74, 0x74, 0xa8, 0x51, 0x0b, 0xf7, 0x7a, 0x98,
-+	0x37, 0xf2, 0x0a, 0x0e, 0xa4, 0x97, 0x04, 0xb8,
-+	0x9b, 0xfd, 0xa0, 0xea, 0xf7, 0x0d, 0xe1, 0xdb,
-+	0x03, 0xf0, 0x31, 0x29, 0xf8, 0xdd, 0x6b, 0x8b,
-+	0x5d, 0xd8, 0x59, 0xa9, 0x29, 0xcf, 0x9a, 0x79,
-+	0x89, 0x19, 0x63, 0x46, 0x09, 0x79, 0x6a, 0x11,
-+	0xda, 0x63, 0x68, 0x48, 0x77, 0x23, 0xfb, 0x7d,
-+	0x3a, 0x43, 0xcb, 0x02, 0x3b, 0x7a, 0x6d, 0x10,
-+	0x2a, 0x9e, 0xac, 0xf1, 0xd4, 0x19, 0xf8, 0x23,
-+	0x64, 0x1d, 0x2c, 0x5f, 0xf2, 0xb0, 0x5c, 0x23,
-+	0x27, 0xf7, 0x27, 0x30, 0x16, 0x37, 0xb1, 0x90,
-+	0xab, 0x38, 0xfb, 0x55, 0xcd, 0x78, 0x58, 0xd4,
-+	0x7d, 0x43, 0xf6, 0x45, 0x5e, 0x55, 0x8d, 0xb1,
-+	0x02, 0x65, 0x58, 0xb4, 0x13, 0x4b, 0x36, 0xf7,
-+	0xcc, 0xfe, 0x3d, 0x0b, 0x82, 0xe2, 0x12, 0x11,
-+	0xbb, 0xe6, 0xb8, 0x3a, 0x48, 0x71, 0xc7, 0x50,
-+	0x06, 0x16, 0x3a, 0xe6, 0x7c, 0x05, 0xc7, 0xc8,
-+	0x4d, 0x2f, 0x08, 0x6a, 0x17, 0x9a, 0x95, 0x97,
-+	0x50, 0x68, 0xdc, 0x28, 0x18, 0xc4, 0x61, 0x38,
-+	0xb9, 0xe0, 0x3e, 0x78, 0xdb, 0x29, 0xe0, 0x9f,
-+	0x52, 0xdd, 0xf8, 0x4f, 0x91, 0xc1, 0xd0, 0x33,
-+	0xa1, 0x7a, 0x8e, 0x30, 0x13, 0x82, 0x07, 0x9f,
-+	0xd3, 0x31, 0x0f, 0x23, 0xbe, 0x32, 0x5a, 0x75,
-+	0xcf, 0x96, 0xb2, 0xec, 0xb5, 0x32, 0xac, 0x21,
-+	0xd1, 0x82, 0x33, 0xd3, 0x15, 0x74, 0xbd, 0x90,
-+	0xf1, 0x2c, 0xe6, 0x5f, 0x8d, 0xe3, 0x02, 0xe8,
-+	0xe9, 0xc4, 0xca, 0x96, 0xeb, 0x0e, 0xbc, 0x91,
-+	0xf4, 0xb9, 0xea, 0xd9, 0x1b, 0x75, 0xbd, 0xe1,
-+	0xac, 0x2a, 0x05, 0x37, 0x52, 0x9b, 0x1b, 0x3f,
-+	0x5a, 0xdc, 0x21, 0xc3, 0x98, 0xbb, 0xaf, 0xa3,
-+	0xf2, 0x00, 0xbf, 0x0d, 0x30, 0x89, 0x05, 0xcc,
-+	0xa5, 0x76, 0xf5, 0x06, 0xf0, 0xc6, 0x54, 0x8a,
-+	0x5d, 0xd4, 0x1e, 0xc1, 0xf2, 0xce, 0xb0, 0x62,
-+	0xc8, 0xfc, 0x59, 0x42, 0x9a, 0x90, 0x60, 0x55,
-+	0xfe, 0x88, 0xa5, 0x8b, 0xb8, 0x33, 0x0c, 0x23,
-+	0x24, 0x0d, 0x15, 0x70, 0x37, 0x1e, 0x3d, 0xf6,
-+	0xd2, 0xea, 0x92, 0x10, 0xb2, 0xc4, 0x51, 0xac,
-+	0xf2, 0xac, 0xf3, 0x6b, 0x6c, 0xaa, 0xcf, 0x12,
-+	0xc5, 0x6c, 0x90, 0x50, 0xb5, 0x0c, 0xfc, 0x1a,
-+	0x15, 0x52, 0xe9, 0x26, 0xc6, 0x52, 0xa4, 0xe7,
-+	0x81, 0x69, 0xe1, 0xe7, 0x9e, 0x30, 0x01, 0xec,
-+	0x84, 0x89, 0xb2, 0x0d, 0x66, 0xdd, 0xce, 0x28,
-+	0x5c, 0xec, 0x98, 0x46, 0x68, 0x21, 0x9f, 0x88,
-+	0x3f, 0x1f, 0x42, 0x77, 0xce, 0xd0, 0x61, 0xd4,
-+	0x20, 0xa7, 0xff, 0x53, 0xad, 0x37, 0xd0, 0x17,
-+	0x35, 0xc9, 0xfc, 0xba, 0x0a, 0x78, 0x3f, 0xf2,
-+	0xcc, 0x86, 0x89, 0xe8, 0x4b, 0x3c, 0x48, 0x33,
-+	0x09, 0x7f, 0xc6, 0xc0, 0xdd, 0xb8, 0xfd, 0x7a,
-+	0x66, 0x66, 0x65, 0xeb, 0x47, 0xa7, 0x04, 0x28,
-+	0xa3, 0x19, 0x8e, 0xa9, 0xb1, 0x13, 0x67, 0x62,
-+	0x70, 0xcf, 0xd7
-+};
-+static const u8 dec_output013[] __initconst = {
-+	0x74, 0xa6, 0x3e, 0xe4, 0xb1, 0xcb, 0xaf, 0xb0,
-+	0x40, 0xe5, 0x0f, 0x9e, 0xf1, 0xf2, 0x89, 0xb5,
-+	0x42, 0x34, 0x8a, 0xa1, 0x03, 0xb7, 0xe9, 0x57,
-+	0x46, 0xbe, 0x20, 0xe4, 0x6e, 0xb0, 0xeb, 0xff,
-+	0xea, 0x07, 0x7e, 0xef, 0xe2, 0x55, 0x9f, 0xe5,
-+	0x78, 0x3a, 0xb7, 0x83, 0xc2, 0x18, 0x40, 0x7b,
-+	0xeb, 0xcd, 0x81, 0xfb, 0x90, 0x12, 0x9e, 0x46,
-+	0xa9, 0xd6, 0x4a, 0xba, 0xb0, 0x62, 0xdb, 0x6b,
-+	0x99, 0xc4, 0xdb, 0x54, 0x4b, 0xb8, 0xa5, 0x71,
-+	0xcb, 0xcd, 0x63, 0x32, 0x55, 0xfb, 0x31, 0xf0,
-+	0x38, 0xf5, 0xbe, 0x78, 0xe4, 0x45, 0xce, 0x1b,
-+	0x6a, 0x5b, 0x0e, 0xf4, 0x16, 0xe4, 0xb1, 0x3d,
-+	0xf6, 0x63, 0x7b, 0xa7, 0x0c, 0xde, 0x6f, 0x8f,
-+	0x74, 0xdf, 0xe0, 0x1e, 0x9d, 0xce, 0x8f, 0x24,
-+	0xef, 0x23, 0x35, 0x33, 0x7b, 0x83, 0x34, 0x23,
-+	0x58, 0x74, 0x14, 0x77, 0x1f, 0xc2, 0x4f, 0x4e,
-+	0xc6, 0x89, 0xf9, 0x52, 0x09, 0x37, 0x64, 0x14,
-+	0xc4, 0x01, 0x6b, 0x9d, 0x77, 0xe8, 0x90, 0x5d,
-+	0xa8, 0x4a, 0x2a, 0xef, 0x5c, 0x7f, 0xeb, 0xbb,
-+	0xb2, 0xc6, 0x93, 0x99, 0x66, 0xdc, 0x7f, 0xd4,
-+	0x9e, 0x2a, 0xca, 0x8d, 0xdb, 0xe7, 0x20, 0xcf,
-+	0xe4, 0x73, 0xae, 0x49, 0x7d, 0x64, 0x0f, 0x0e,
-+	0x28, 0x46, 0xa9, 0xa8, 0x32, 0xe4, 0x0e, 0xf6,
-+	0x51, 0x53, 0xb8, 0x3c, 0xb1, 0xff, 0xa3, 0x33,
-+	0x41, 0x75, 0xff, 0xf1, 0x6f, 0xf1, 0xfb, 0xbb,
-+	0x83, 0x7f, 0x06, 0x9b, 0xe7, 0x1b, 0x0a, 0xe0,
-+	0x5c, 0x33, 0x60, 0x5b, 0xdb, 0x5b, 0xed, 0xfe,
-+	0xa5, 0x16, 0x19, 0x72, 0xa3, 0x64, 0x23, 0x00,
-+	0x02, 0xc7, 0xf3, 0x6a, 0x81, 0x3e, 0x44, 0x1d,
-+	0x79, 0x15, 0x5f, 0x9a, 0xde, 0xe2, 0xfd, 0x1b,
-+	0x73, 0xc1, 0xbc, 0x23, 0xba, 0x31, 0xd2, 0x50,
-+	0xd5, 0xad, 0x7f, 0x74, 0xa7, 0xc9, 0xf8, 0x3e,
-+	0x2b, 0x26, 0x10, 0xf6, 0x03, 0x36, 0x74, 0xe4,
-+	0x0e, 0x6a, 0x72, 0xb7, 0x73, 0x0a, 0x42, 0x28,
-+	0xc2, 0xad, 0x5e, 0x03, 0xbe, 0xb8, 0x0b, 0xa8,
-+	0x5b, 0xd4, 0xb8, 0xba, 0x52, 0x89, 0xb1, 0x9b,
-+	0xc1, 0xc3, 0x65, 0x87, 0xed, 0xa5, 0xf4, 0x86,
-+	0xfd, 0x41, 0x80, 0x91, 0x27, 0x59, 0x53, 0x67,
-+	0x15, 0x78, 0x54, 0x8b, 0x2d, 0x3d, 0xc7, 0xff,
-+	0x02, 0x92, 0x07, 0x5f, 0x7a, 0x4b, 0x60, 0x59,
-+	0x3c, 0x6f, 0x5c, 0xd8, 0xec, 0x95, 0xd2, 0xfe,
-+	0xa0, 0x3b, 0xd8, 0x3f, 0xd1, 0x69, 0xa6, 0xd6,
-+	0x41, 0xb2, 0xf4, 0x4d, 0x12, 0xf4, 0x58, 0x3e,
-+	0x66, 0x64, 0x80, 0x31, 0x9b, 0xa8, 0x4c, 0x8b,
-+	0x07, 0xb2, 0xec, 0x66, 0x94, 0x66, 0x47, 0x50,
-+	0x50, 0x5f, 0x18, 0x0b, 0x0e, 0xd6, 0xc0, 0x39,
-+	0x21, 0x13, 0x9e, 0x33, 0xbc, 0x79, 0x36, 0x02,
-+	0x96, 0x70, 0xf0, 0x48, 0x67, 0x2f, 0x26, 0xe9,
-+	0x6d, 0x10, 0xbb, 0xd6, 0x3f, 0xd1, 0x64, 0x7a,
-+	0x2e, 0xbe, 0x0c, 0x61, 0xf0, 0x75, 0x42, 0x38,
-+	0x23, 0xb1, 0x9e, 0x9f, 0x7c, 0x67, 0x66, 0xd9,
-+	0x58, 0x9a, 0xf1, 0xbb, 0x41, 0x2a, 0x8d, 0x65,
-+	0x84, 0x94, 0xfc, 0xdc, 0x6a, 0x50, 0x64, 0xdb,
-+	0x56, 0x33, 0x76, 0x00, 0x10, 0xed, 0xbe, 0xd2,
-+	0x12, 0xf6, 0xf6, 0x1b, 0xa2, 0x16, 0xde, 0xae,
-+	0x31, 0x95, 0xdd, 0xb1, 0x08, 0x7e, 0x4e, 0xee,
-+	0xe7, 0xf9, 0xa5, 0xfb, 0x5b, 0x61, 0x43, 0x00,
-+	0x40, 0xf6, 0x7e, 0x02, 0x04, 0x32, 0x4e, 0x0c,
-+	0xe2, 0x66, 0x0d, 0xd7, 0x07, 0x98, 0x0e, 0xf8,
-+	0x72, 0x34, 0x6d, 0x95, 0x86, 0xd7, 0xcb, 0x31,
-+	0x54, 0x47, 0xd0, 0x38, 0x29, 0x9c, 0x5a, 0x68,
-+	0xd4, 0x87, 0x76, 0xc9, 0xe7, 0x7e, 0xe3, 0xf4,
-+	0x81, 0x6d, 0x18, 0xcb, 0xc9, 0x05, 0xaf, 0xa0,
-+	0xfb, 0x66, 0xf7, 0xf1, 0x1c, 0xc6, 0x14, 0x11,
-+	0x4f, 0x2b, 0x79, 0x42, 0x8b, 0xbc, 0xac, 0xe7,
-+	0x6c, 0xfe, 0x0f, 0x58, 0xe7, 0x7c, 0x78, 0x39,
-+	0x30, 0xb0, 0x66, 0x2c, 0x9b, 0x6d, 0x3a, 0xe1,
-+	0xcf, 0xc9, 0xa4, 0x0e, 0x6d, 0x6d, 0x8a, 0xa1,
-+	0x3a, 0xe7, 0x28, 0xd4, 0x78, 0x4c, 0xa6, 0xa2,
-+	0x2a, 0xa6, 0x03, 0x30, 0xd7, 0xa8, 0x25, 0x66,
-+	0x87, 0x2f, 0x69, 0x5c, 0x4e, 0xdd, 0xa5, 0x49,
-+	0x5d, 0x37, 0x4a, 0x59, 0xc4, 0xaf, 0x1f, 0xa2,
-+	0xe4, 0xf8, 0xa6, 0x12, 0x97, 0xd5, 0x79, 0xf5,
-+	0xe2, 0x4a, 0x2b, 0x5f, 0x61, 0xe4, 0x9e, 0xe3,
-+	0xee, 0xb8, 0xa7, 0x5b, 0x2f, 0xf4, 0x9e, 0x6c,
-+	0xfb, 0xd1, 0xc6, 0x56, 0x77, 0xba, 0x75, 0xaa,
-+	0x3d, 0x1a, 0xa8, 0x0b, 0xb3, 0x68, 0x24, 0x00,
-+	0x10, 0x7f, 0xfd, 0xd7, 0xa1, 0x8d, 0x83, 0x54,
-+	0x4f, 0x1f, 0xd8, 0x2a, 0xbe, 0x8a, 0x0c, 0x87,
-+	0xab, 0xa2, 0xde, 0xc3, 0x39, 0xbf, 0x09, 0x03,
-+	0xa5, 0xf3, 0x05, 0x28, 0xe1, 0xe1, 0xee, 0x39,
-+	0x70, 0x9c, 0xd8, 0x81, 0x12, 0x1e, 0x02, 0x40,
-+	0xd2, 0x6e, 0xf0, 0xeb, 0x1b, 0x3d, 0x22, 0xc6,
-+	0xe5, 0xe3, 0xb4, 0x5a, 0x98, 0xbb, 0xf0, 0x22,
-+	0x28, 0x8d, 0xe5, 0xd3, 0x16, 0x48, 0x24, 0xa5,
-+	0xe6, 0x66, 0x0c, 0xf9, 0x08, 0xf9, 0x7e, 0x1e,
-+	0xe1, 0x28, 0x26, 0x22, 0xc7, 0xc7, 0x0a, 0x32,
-+	0x47, 0xfa, 0xa3, 0xbe, 0x3c, 0xc4, 0xc5, 0x53,
-+	0x0a, 0xd5, 0x94, 0x4a, 0xd7, 0x93, 0xd8, 0x42,
-+	0x99, 0xb9, 0x0a, 0xdb, 0x56, 0xf7, 0xb9, 0x1c,
-+	0x53, 0x4f, 0xfa, 0xd3, 0x74, 0xad, 0xd9, 0x68,
-+	0xf1, 0x1b, 0xdf, 0x61, 0xc6, 0x5e, 0xa8, 0x48,
-+	0xfc, 0xd4, 0x4a, 0x4c, 0x3c, 0x32, 0xf7, 0x1c,
-+	0x96, 0x21, 0x9b, 0xf9, 0xa3, 0xcc, 0x5a, 0xce,
-+	0xd5, 0xd7, 0x08, 0x24, 0xf6, 0x1c, 0xfd, 0xdd,
-+	0x38, 0xc2, 0x32, 0xe9, 0xb8, 0xe7, 0xb6, 0xfa,
-+	0x9d, 0x45, 0x13, 0x2c, 0x83, 0xfd, 0x4a, 0x69,
-+	0x82, 0xcd, 0xdc, 0xb3, 0x76, 0x0c, 0x9e, 0xd8,
-+	0xf4, 0x1b, 0x45, 0x15, 0xb4, 0x97, 0xe7, 0x58,
-+	0x34, 0xe2, 0x03, 0x29, 0x5a, 0xbf, 0xb6, 0xe0,
-+	0x5d, 0x13, 0xd9, 0x2b, 0xb4, 0x80, 0xb2, 0x45,
-+	0x81, 0x6a, 0x2e, 0x6c, 0x89, 0x7d, 0xee, 0xbb,
-+	0x52, 0xdd, 0x1f, 0x18, 0xe7, 0x13, 0x6b, 0x33,
-+	0x0e, 0xea, 0x36, 0x92, 0x77, 0x7b, 0x6d, 0x9c,
-+	0x5a, 0x5f, 0x45, 0x7b, 0x7b, 0x35, 0x62, 0x23,
-+	0xd1, 0xbf, 0x0f, 0xd0, 0x08, 0x1b, 0x2b, 0x80,
-+	0x6b, 0x7e, 0xf1, 0x21, 0x47, 0xb0, 0x57, 0xd1,
-+	0x98, 0x72, 0x90, 0x34, 0x1c, 0x20, 0x04, 0xff,
-+	0x3d, 0x5c, 0xee, 0x0e, 0x57, 0x5f, 0x6f, 0x24,
-+	0x4e, 0x3c, 0xea, 0xfc, 0xa5, 0xa9, 0x83, 0xc9,
-+	0x61, 0xb4, 0x51, 0x24, 0xf8, 0x27, 0x5e, 0x46,
-+	0x8c, 0xb1, 0x53, 0x02, 0x96, 0x35, 0xba, 0xb8,
-+	0x4c, 0x71, 0xd3, 0x15, 0x59, 0x35, 0x22, 0x20,
-+	0xad, 0x03, 0x9f, 0x66, 0x44, 0x3b, 0x9c, 0x35,
-+	0x37, 0x1f, 0x9b, 0xbb, 0xf3, 0xdb, 0x35, 0x63,
-+	0x30, 0x64, 0xaa, 0xa2, 0x06, 0xa8, 0x5d, 0xbb,
-+	0xe1, 0x9f, 0x70, 0xec, 0x82, 0x11, 0x06, 0x36,
-+	0xec, 0x8b, 0x69, 0x66, 0x24, 0x44, 0xc9, 0x4a,
-+	0x57, 0xbb, 0x9b, 0x78, 0x13, 0xce, 0x9c, 0x0c,
-+	0xba, 0x92, 0x93, 0x63, 0xb8, 0xe2, 0x95, 0x0f,
-+	0x0f, 0x16, 0x39, 0x52, 0xfd, 0x3a, 0x6d, 0x02,
-+	0x4b, 0xdf, 0x13, 0xd3, 0x2a, 0x22, 0xb4, 0x03,
-+	0x7c, 0x54, 0x49, 0x96, 0x68, 0x54, 0x10, 0xfa,
-+	0xef, 0xaa, 0x6c, 0xe8, 0x22, 0xdc, 0x71, 0x16,
-+	0x13, 0x1a, 0xf6, 0x28, 0xe5, 0x6d, 0x77, 0x3d,
-+	0xcd, 0x30, 0x63, 0xb1, 0x70, 0x52, 0xa1, 0xc5,
-+	0x94, 0x5f, 0xcf, 0xe8, 0xb8, 0x26, 0x98, 0xf7,
-+	0x06, 0xa0, 0x0a, 0x70, 0xfa, 0x03, 0x80, 0xac,
-+	0xc1, 0xec, 0xd6, 0x4c, 0x54, 0xd7, 0xfe, 0x47,
-+	0xb6, 0x88, 0x4a, 0xf7, 0x71, 0x24, 0xee, 0xf3,
-+	0xd2, 0xc2, 0x4a, 0x7f, 0xfe, 0x61, 0xc7, 0x35,
-+	0xc9, 0x37, 0x67, 0xcb, 0x24, 0x35, 0xda, 0x7e,
-+	0xca, 0x5f, 0xf3, 0x8d, 0xd4, 0x13, 0x8e, 0xd6,
-+	0xcb, 0x4d, 0x53, 0x8f, 0x53, 0x1f, 0xc0, 0x74,
-+	0xf7, 0x53, 0xb9, 0x5e, 0x23, 0x37, 0xba, 0x6e,
-+	0xe3, 0x9d, 0x07, 0x55, 0x25, 0x7b, 0xe6, 0x2a,
-+	0x64, 0xd1, 0x32, 0xdd, 0x54, 0x1b, 0x4b, 0xc0,
-+	0xe1, 0xd7, 0x69, 0x58, 0xf8, 0x93, 0x29, 0xc4,
-+	0xdd, 0x23, 0x2f, 0xa5, 0xfc, 0x9d, 0x7e, 0xf8,
-+	0xd4, 0x90, 0xcd, 0x82, 0x55, 0xdc, 0x16, 0x16,
-+	0x9f, 0x07, 0x52, 0x9b, 0x9d, 0x25, 0xed, 0x32,
-+	0xc5, 0x7b, 0xdf, 0xf6, 0x83, 0x46, 0x3d, 0x65,
-+	0xb7, 0xef, 0x87, 0x7a, 0x12, 0x69, 0x8f, 0x06,
-+	0x7c, 0x51, 0x15, 0x4a, 0x08, 0xe8, 0xac, 0x9a,
-+	0x0c, 0x24, 0xa7, 0x27, 0xd8, 0x46, 0x2f, 0xe7,
-+	0x01, 0x0e, 0x1c, 0xc6, 0x91, 0xb0, 0x6e, 0x85,
-+	0x65, 0xf0, 0x29, 0x0d, 0x2e, 0x6b, 0x3b, 0xfb,
-+	0x4b, 0xdf, 0xe4, 0x80, 0x93, 0x03, 0x66, 0x46,
-+	0x3e, 0x8a, 0x6e, 0xf3, 0x5e, 0x4d, 0x62, 0x0e,
-+	0x49, 0x05, 0xaf, 0xd4, 0xf8, 0x21, 0x20, 0x61,
-+	0x1d, 0x39, 0x17, 0xf4, 0x61, 0x47, 0x95, 0xfb,
-+	0x15, 0x2e, 0xb3, 0x4f, 0xd0, 0x5d, 0xf5, 0x7d,
-+	0x40, 0xda, 0x90, 0x3c, 0x6b, 0xcb, 0x17, 0x00,
-+	0x13, 0x3b, 0x64, 0x34, 0x1b, 0xf0, 0xf2, 0xe5,
-+	0x3b, 0xb2, 0xc7, 0xd3, 0x5f, 0x3a, 0x44, 0xa6,
-+	0x9b, 0xb7, 0x78, 0x0e, 0x42, 0x5d, 0x4c, 0xc1,
-+	0xe9, 0xd2, 0xcb, 0xb7, 0x78, 0xd1, 0xfe, 0x9a,
-+	0xb5, 0x07, 0xe9, 0xe0, 0xbe, 0xe2, 0x8a, 0xa7,
-+	0x01, 0x83, 0x00, 0x8c, 0x5c, 0x08, 0xe6, 0x63,
-+	0x12, 0x92, 0xb7, 0xb7, 0xa6, 0x19, 0x7d, 0x38,
-+	0x13, 0x38, 0x92, 0x87, 0x24, 0xf9, 0x48, 0xb3,
-+	0x5e, 0x87, 0x6a, 0x40, 0x39, 0x5c, 0x3f, 0xed,
-+	0x8f, 0xee, 0xdb, 0x15, 0x82, 0x06, 0xda, 0x49,
-+	0x21, 0x2b, 0xb5, 0xbf, 0x32, 0x7c, 0x9f, 0x42,
-+	0x28, 0x63, 0xcf, 0xaf, 0x1e, 0xf8, 0xc6, 0xa0,
-+	0xd1, 0x02, 0x43, 0x57, 0x62, 0xec, 0x9b, 0x0f,
-+	0x01, 0x9e, 0x71, 0xd8, 0x87, 0x9d, 0x01, 0xc1,
-+	0x58, 0x77, 0xd9, 0xaf, 0xb1, 0x10, 0x7e, 0xdd,
-+	0xa6, 0x50, 0x96, 0xe5, 0xf0, 0x72, 0x00, 0x6d,
-+	0x4b, 0xf8, 0x2a, 0x8f, 0x19, 0xf3, 0x22, 0x88,
-+	0x11, 0x4a, 0x8b, 0x7c, 0xfd, 0xb7, 0xed, 0xe1,
-+	0xf6, 0x40, 0x39, 0xe0, 0xe9, 0xf6, 0x3d, 0x25,
-+	0xe6, 0x74, 0x3c, 0x58, 0x57, 0x7f, 0xe1, 0x22,
-+	0x96, 0x47, 0x31, 0x91, 0xba, 0x70, 0x85, 0x28,
-+	0x6b, 0x9f, 0x6e, 0x25, 0xac, 0x23, 0x66, 0x2f,
-+	0x29, 0x88, 0x28, 0xce, 0x8c, 0x5c, 0x88, 0x53,
-+	0xd1, 0x3b, 0xcc, 0x6a, 0x51, 0xb2, 0xe1, 0x28,
-+	0x3f, 0x91, 0xb4, 0x0d, 0x00, 0x3a, 0xe3, 0xf8,
-+	0xc3, 0x8f, 0xd7, 0x96, 0x62, 0x0e, 0x2e, 0xfc,
-+	0xc8, 0x6c, 0x77, 0xa6, 0x1d, 0x22, 0xc1, 0xb8,
-+	0xe6, 0x61, 0xd7, 0x67, 0x36, 0x13, 0x7b, 0xbb,
-+	0x9b, 0x59, 0x09, 0xa6, 0xdf, 0xf7, 0x6b, 0xa3,
-+	0x40, 0x1a, 0xf5, 0x4f, 0xb4, 0xda, 0xd3, 0xf3,
-+	0x81, 0x93, 0xc6, 0x18, 0xd9, 0x26, 0xee, 0xac,
-+	0xf0, 0xaa, 0xdf, 0xc5, 0x9c, 0xca, 0xc2, 0xa2,
-+	0xcc, 0x7b, 0x5c, 0x24, 0xb0, 0xbc, 0xd0, 0x6a,
-+	0x4d, 0x89, 0x09, 0xb8, 0x07, 0xfe, 0x87, 0xad,
-+	0x0a, 0xea, 0xb8, 0x42, 0xf9, 0x5e, 0xb3, 0x3e,
-+	0x36, 0x4c, 0xaf, 0x75, 0x9e, 0x1c, 0xeb, 0xbd,
-+	0xbc, 0xbb, 0x80, 0x40, 0xa7, 0x3a, 0x30, 0xbf,
-+	0xa8, 0x44, 0xf4, 0xeb, 0x38, 0xad, 0x29, 0xba,
-+	0x23, 0xed, 0x41, 0x0c, 0xea, 0xd2, 0xbb, 0x41,
-+	0x18, 0xd6, 0xb9, 0xba, 0x65, 0x2b, 0xa3, 0x91,
-+	0x6d, 0x1f, 0xa9, 0xf4, 0xd1, 0x25, 0x8d, 0x4d,
-+	0x38, 0xff, 0x64, 0xa0, 0xec, 0xde, 0xa6, 0xb6,
-+	0x79, 0xab, 0x8e, 0x33, 0x6c, 0x47, 0xde, 0xaf,
-+	0x94, 0xa4, 0xa5, 0x86, 0x77, 0x55, 0x09, 0x92,
-+	0x81, 0x31, 0x76, 0xc7, 0x34, 0x22, 0x89, 0x8e,
-+	0x3d, 0x26, 0x26, 0xd7, 0xfc, 0x1e, 0x16, 0x72,
-+	0x13, 0x33, 0x63, 0xd5, 0x22, 0xbe, 0xb8, 0x04,
-+	0x34, 0x84, 0x41, 0xbb, 0x80, 0xd0, 0x9f, 0x46,
-+	0x48, 0x07, 0xa7, 0xfc, 0x2b, 0x3a, 0x75, 0x55,
-+	0x8c, 0xc7, 0x6a, 0xbd, 0x7e, 0x46, 0x08, 0x84,
-+	0x0f, 0xd5, 0x74, 0xc0, 0x82, 0x8e, 0xaa, 0x61,
-+	0x05, 0x01, 0xb2, 0x47, 0x6e, 0x20, 0x6a, 0x2d,
-+	0x58, 0x70, 0x48, 0x32, 0xa7, 0x37, 0xd2, 0xb8,
-+	0x82, 0x1a, 0x51, 0xb9, 0x61, 0xdd, 0xfd, 0x9d,
-+	0x6b, 0x0e, 0x18, 0x97, 0xf8, 0x45, 0x5f, 0x87,
-+	0x10, 0xcf, 0x34, 0x72, 0x45, 0x26, 0x49, 0x70,
-+	0xe7, 0xa3, 0x78, 0xe0, 0x52, 0x89, 0x84, 0x94,
-+	0x83, 0x82, 0xc2, 0x69, 0x8f, 0xe3, 0xe1, 0x3f,
-+	0x60, 0x74, 0x88, 0xc4, 0xf7, 0x75, 0x2c, 0xfb,
-+	0xbd, 0xb6, 0xc4, 0x7e, 0x10, 0x0a, 0x6c, 0x90,
-+	0x04, 0x9e, 0xc3, 0x3f, 0x59, 0x7c, 0xce, 0x31,
-+	0x18, 0x60, 0x57, 0x73, 0x46, 0x94, 0x7d, 0x06,
-+	0xa0, 0x6d, 0x44, 0xec, 0xa2, 0x0a, 0x9e, 0x05,
-+	0x15, 0xef, 0xca, 0x5c, 0xbf, 0x00, 0xeb, 0xf7,
-+	0x3d, 0x32, 0xd4, 0xa5, 0xef, 0x49, 0x89, 0x5e,
-+	0x46, 0xb0, 0xa6, 0x63, 0x5b, 0x8a, 0x73, 0xae,
-+	0x6f, 0xd5, 0x9d, 0xf8, 0x4f, 0x40, 0xb5, 0xb2,
-+	0x6e, 0xd3, 0xb6, 0x01, 0xa9, 0x26, 0xa2, 0x21,
-+	0xcf, 0x33, 0x7a, 0x3a, 0xa4, 0x23, 0x13, 0xb0,
-+	0x69, 0x6a, 0xee, 0xce, 0xd8, 0x9d, 0x01, 0x1d,
-+	0x50, 0xc1, 0x30, 0x6c, 0xb1, 0xcd, 0xa0, 0xf0,
-+	0xf0, 0xa2, 0x64, 0x6f, 0xbb, 0xbf, 0x5e, 0xe6,
-+	0xab, 0x87, 0xb4, 0x0f, 0x4f, 0x15, 0xaf, 0xb5,
-+	0x25, 0xa1, 0xb2, 0xd0, 0x80, 0x2c, 0xfb, 0xf9,
-+	0xfe, 0xd2, 0x33, 0xbb, 0x76, 0xfe, 0x7c, 0xa8,
-+	0x66, 0xf7, 0xe7, 0x85, 0x9f, 0x1f, 0x85, 0x57,
-+	0x88, 0xe1, 0xe9, 0x63, 0xe4, 0xd8, 0x1c, 0xa1,
-+	0xfb, 0xda, 0x44, 0x05, 0x2e, 0x1d, 0x3a, 0x1c,
-+	0xff, 0xc8, 0x3b, 0xc0, 0xfe, 0xda, 0x22, 0x0b,
-+	0x43, 0xd6, 0x88, 0x39, 0x4c, 0x4a, 0xa6, 0x69,
-+	0x18, 0x93, 0x42, 0x4e, 0xb5, 0xcc, 0x66, 0x0d,
-+	0x09, 0xf8, 0x1e, 0x7c, 0xd3, 0x3c, 0x99, 0x0d,
-+	0x50, 0x1d, 0x62, 0xe9, 0x57, 0x06, 0xbf, 0x19,
-+	0x88, 0xdd, 0xad, 0x7b, 0x4f, 0xf9, 0xc7, 0x82,
-+	0x6d, 0x8d, 0xc8, 0xc4, 0xc5, 0x78, 0x17, 0x20,
-+	0x15, 0xc5, 0x52, 0x41, 0xcf, 0x5b, 0xd6, 0x7f,
-+	0x94, 0x02, 0x41, 0xe0, 0x40, 0x22, 0x03, 0x5e,
-+	0xd1, 0x53, 0xd4, 0x86, 0xd3, 0x2c, 0x9f, 0x0f,
-+	0x96, 0xe3, 0x6b, 0x9a, 0x76, 0x32, 0x06, 0x47,
-+	0x4b, 0x11, 0xb3, 0xdd, 0x03, 0x65, 0xbd, 0x9b,
-+	0x01, 0xda, 0x9c, 0xb9, 0x7e, 0x3f, 0x6a, 0xc4,
-+	0x7b, 0xea, 0xd4, 0x3c, 0xb9, 0xfb, 0x5c, 0x6b,
-+	0x64, 0x33, 0x52, 0xba, 0x64, 0x78, 0x8f, 0xa4,
-+	0xaf, 0x7a, 0x61, 0x8d, 0xbc, 0xc5, 0x73, 0xe9,
-+	0x6b, 0x58, 0x97, 0x4b, 0xbf, 0x63, 0x22, 0xd3,
-+	0x37, 0x02, 0x54, 0xc5, 0xb9, 0x16, 0x4a, 0xf0,
-+	0x19, 0xd8, 0x94, 0x57, 0xb8, 0x8a, 0xb3, 0x16,
-+	0x3b, 0xd0, 0x84, 0x8e, 0x67, 0xa6, 0xa3, 0x7d,
-+	0x78, 0xec, 0x00
-+};
-+static const u8 dec_assoc013[] __initconst = {
-+	0xb1, 0x69, 0x83, 0x87, 0x30, 0xaa, 0x5d, 0xb8,
-+	0x77, 0xe8, 0x21, 0xff, 0x06, 0x59, 0x35, 0xce,
-+	0x75, 0xfe, 0x38, 0xef, 0xb8, 0x91, 0x43, 0x8c,
-+	0xcf, 0x70, 0xdd, 0x0a, 0x68, 0xbf, 0xd4, 0xbc,
-+	0x16, 0x76, 0x99, 0x36, 0x1e, 0x58, 0x79, 0x5e,
-+	0xd4, 0x29, 0xf7, 0x33, 0x93, 0x48, 0xdb, 0x5f,
-+	0x01, 0xae, 0x9c, 0xb6, 0xe4, 0x88, 0x6d, 0x2b,
-+	0x76, 0x75, 0xe0, 0xf3, 0x74, 0xe2, 0xc9
-+};
-+static const u8 dec_nonce013[] __initconst = {
-+	0x05, 0xa3, 0x93, 0xed, 0x30, 0xc5, 0xa2, 0x06
-+};
-+static const u8 dec_key013[] __initconst = {
-+	0xb3, 0x35, 0x50, 0x03, 0x54, 0x2e, 0x40, 0x5e,
-+	0x8f, 0x59, 0x8e, 0xc5, 0x90, 0xd5, 0x27, 0x2d,
-+	0xba, 0x29, 0x2e, 0xcb, 0x1b, 0x70, 0x44, 0x1e,
-+	0x65, 0x91, 0x6e, 0x2a, 0x79, 0x22, 0xda, 0x64
-+};
-+
-+static const struct chacha20poly1305_testvec
-+chacha20poly1305_dec_vectors[] __initconst = {
-+	{ dec_input001, dec_output001, dec_assoc001, dec_nonce001, dec_key001,
-+	  sizeof(dec_input001), sizeof(dec_assoc001), sizeof(dec_nonce001) },
-+	{ dec_input002, dec_output002, dec_assoc002, dec_nonce002, dec_key002,
-+	  sizeof(dec_input002), sizeof(dec_assoc002), sizeof(dec_nonce002) },
-+	{ dec_input003, dec_output003, dec_assoc003, dec_nonce003, dec_key003,
-+	  sizeof(dec_input003), sizeof(dec_assoc003), sizeof(dec_nonce003) },
-+	{ dec_input004, dec_output004, dec_assoc004, dec_nonce004, dec_key004,
-+	  sizeof(dec_input004), sizeof(dec_assoc004), sizeof(dec_nonce004) },
-+	{ dec_input005, dec_output005, dec_assoc005, dec_nonce005, dec_key005,
-+	  sizeof(dec_input005), sizeof(dec_assoc005), sizeof(dec_nonce005) },
-+	{ dec_input006, dec_output006, dec_assoc006, dec_nonce006, dec_key006,
-+	  sizeof(dec_input006), sizeof(dec_assoc006), sizeof(dec_nonce006) },
-+	{ dec_input007, dec_output007, dec_assoc007, dec_nonce007, dec_key007,
-+	  sizeof(dec_input007), sizeof(dec_assoc007), sizeof(dec_nonce007) },
-+	{ dec_input008, dec_output008, dec_assoc008, dec_nonce008, dec_key008,
-+	  sizeof(dec_input008), sizeof(dec_assoc008), sizeof(dec_nonce008) },
-+	{ dec_input009, dec_output009, dec_assoc009, dec_nonce009, dec_key009,
-+	  sizeof(dec_input009), sizeof(dec_assoc009), sizeof(dec_nonce009) },
-+	{ dec_input010, dec_output010, dec_assoc010, dec_nonce010, dec_key010,
-+	  sizeof(dec_input010), sizeof(dec_assoc010), sizeof(dec_nonce010) },
-+	{ dec_input011, dec_output011, dec_assoc011, dec_nonce011, dec_key011,
-+	  sizeof(dec_input011), sizeof(dec_assoc011), sizeof(dec_nonce011) },
-+	{ dec_input012, dec_output012, dec_assoc012, dec_nonce012, dec_key012,
-+	  sizeof(dec_input012), sizeof(dec_assoc012), sizeof(dec_nonce012) },
-+	{ dec_input013, dec_output013, dec_assoc013, dec_nonce013, dec_key013,
-+	  sizeof(dec_input013), sizeof(dec_assoc013), sizeof(dec_nonce013),
-+	  true }
-+};
-+
-+static const u8 xenc_input001[] __initconst = {
-+	0x49, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x65, 0x74,
-+	0x2d, 0x44, 0x72, 0x61, 0x66, 0x74, 0x73, 0x20,
-+	0x61, 0x72, 0x65, 0x20, 0x64, 0x72, 0x61, 0x66,
-+	0x74, 0x20, 0x64, 0x6f, 0x63, 0x75, 0x6d, 0x65,
-+	0x6e, 0x74, 0x73, 0x20, 0x76, 0x61, 0x6c, 0x69,
-+	0x64, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x61, 0x20,
-+	0x6d, 0x61, 0x78, 0x69, 0x6d, 0x75, 0x6d, 0x20,
-+	0x6f, 0x66, 0x20, 0x73, 0x69, 0x78, 0x20, 0x6d,
-+	0x6f, 0x6e, 0x74, 0x68, 0x73, 0x20, 0x61, 0x6e,
-+	0x64, 0x20, 0x6d, 0x61, 0x79, 0x20, 0x62, 0x65,
-+	0x20, 0x75, 0x70, 0x64, 0x61, 0x74, 0x65, 0x64,
-+	0x2c, 0x20, 0x72, 0x65, 0x70, 0x6c, 0x61, 0x63,
-+	0x65, 0x64, 0x2c, 0x20, 0x6f, 0x72, 0x20, 0x6f,
-+	0x62, 0x73, 0x6f, 0x6c, 0x65, 0x74, 0x65, 0x64,
-+	0x20, 0x62, 0x79, 0x20, 0x6f, 0x74, 0x68, 0x65,
-+	0x72, 0x20, 0x64, 0x6f, 0x63, 0x75, 0x6d, 0x65,
-+	0x6e, 0x74, 0x73, 0x20, 0x61, 0x74, 0x20, 0x61,
-+	0x6e, 0x79, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x2e,
-+	0x20, 0x49, 0x74, 0x20, 0x69, 0x73, 0x20, 0x69,
-+	0x6e, 0x61, 0x70, 0x70, 0x72, 0x6f, 0x70, 0x72,
-+	0x69, 0x61, 0x74, 0x65, 0x20, 0x74, 0x6f, 0x20,
-+	0x75, 0x73, 0x65, 0x20, 0x49, 0x6e, 0x74, 0x65,
-+	0x72, 0x6e, 0x65, 0x74, 0x2d, 0x44, 0x72, 0x61,
-+	0x66, 0x74, 0x73, 0x20, 0x61, 0x73, 0x20, 0x72,
-+	0x65, 0x66, 0x65, 0x72, 0x65, 0x6e, 0x63, 0x65,
-+	0x20, 0x6d, 0x61, 0x74, 0x65, 0x72, 0x69, 0x61,
-+	0x6c, 0x20, 0x6f, 0x72, 0x20, 0x74, 0x6f, 0x20,
-+	0x63, 0x69, 0x74, 0x65, 0x20, 0x74, 0x68, 0x65,
-+	0x6d, 0x20, 0x6f, 0x74, 0x68, 0x65, 0x72, 0x20,
-+	0x74, 0x68, 0x61, 0x6e, 0x20, 0x61, 0x73, 0x20,
-+	0x2f, 0xe2, 0x80, 0x9c, 0x77, 0x6f, 0x72, 0x6b,
-+	0x20, 0x69, 0x6e, 0x20, 0x70, 0x72, 0x6f, 0x67,
-+	0x72, 0x65, 0x73, 0x73, 0x2e, 0x2f, 0xe2, 0x80,
-+	0x9d
-+};
-+static const u8 xenc_output001[] __initconst = {
-+	0x1a, 0x6e, 0x3a, 0xd9, 0xfd, 0x41, 0x3f, 0x77,
-+	0x54, 0x72, 0x0a, 0x70, 0x9a, 0xa0, 0x29, 0x92,
-+	0x2e, 0xed, 0x93, 0xcf, 0x0f, 0x71, 0x88, 0x18,
-+	0x7a, 0x9d, 0x2d, 0x24, 0xe0, 0xf5, 0xea, 0x3d,
-+	0x55, 0x64, 0xd7, 0xad, 0x2a, 0x1a, 0x1f, 0x7e,
-+	0x86, 0x6d, 0xb0, 0xce, 0x80, 0x41, 0x72, 0x86,
-+	0x26, 0xee, 0x84, 0xd7, 0xef, 0x82, 0x9e, 0xe2,
-+	0x60, 0x9d, 0x5a, 0xfc, 0xf0, 0xe4, 0x19, 0x85,
-+	0xea, 0x09, 0xc6, 0xfb, 0xb3, 0xa9, 0x50, 0x09,
-+	0xec, 0x5e, 0x11, 0x90, 0xa1, 0xc5, 0x4e, 0x49,
-+	0xef, 0x50, 0xd8, 0x8f, 0xe0, 0x78, 0xd7, 0xfd,
-+	0xb9, 0x3b, 0xc9, 0xf2, 0x91, 0xc8, 0x25, 0xc8,
-+	0xa7, 0x63, 0x60, 0xce, 0x10, 0xcd, 0xc6, 0x7f,
-+	0xf8, 0x16, 0xf8, 0xe1, 0x0a, 0xd9, 0xde, 0x79,
-+	0x50, 0x33, 0xf2, 0x16, 0x0f, 0x17, 0xba, 0xb8,
-+	0x5d, 0xd8, 0xdf, 0x4e, 0x51, 0xa8, 0x39, 0xd0,
-+	0x85, 0xca, 0x46, 0x6a, 0x10, 0xa7, 0xa3, 0x88,
-+	0xef, 0x79, 0xb9, 0xf8, 0x24, 0xf3, 0xe0, 0x71,
-+	0x7b, 0x76, 0x28, 0x46, 0x3a, 0x3a, 0x1b, 0x91,
-+	0xb6, 0xd4, 0x3e, 0x23, 0xe5, 0x44, 0x15, 0xbf,
-+	0x60, 0x43, 0x9d, 0xa4, 0xbb, 0xd5, 0x5f, 0x89,
-+	0xeb, 0xef, 0x8e, 0xfd, 0xdd, 0xb4, 0x0d, 0x46,
-+	0xf0, 0x69, 0x23, 0x63, 0xae, 0x94, 0xf5, 0x5e,
-+	0xa5, 0xad, 0x13, 0x1c, 0x41, 0x76, 0xe6, 0x90,
-+	0xd6, 0x6d, 0xa2, 0x8f, 0x97, 0x4c, 0xa8, 0x0b,
-+	0xcf, 0x8d, 0x43, 0x2b, 0x9c, 0x9b, 0xc5, 0x58,
-+	0xa5, 0xb6, 0x95, 0x9a, 0xbf, 0x81, 0xc6, 0x54,
-+	0xc9, 0x66, 0x0c, 0xe5, 0x4f, 0x6a, 0x53, 0xa1,
-+	0xe5, 0x0c, 0xba, 0x31, 0xde, 0x34, 0x64, 0x73,
-+	0x8a, 0x3b, 0xbd, 0x92, 0x01, 0xdb, 0x71, 0x69,
-+	0xf3, 0x58, 0x99, 0xbc, 0xd1, 0xcb, 0x4a, 0x05,
-+	0xe2, 0x58, 0x9c, 0x25, 0x17, 0xcd, 0xdc, 0x83,
-+	0xb7, 0xff, 0xfb, 0x09, 0x61, 0xad, 0xbf, 0x13,
-+	0x5b, 0x5e, 0xed, 0x46, 0x82, 0x6f, 0x22, 0xd8,
-+	0x93, 0xa6, 0x85, 0x5b, 0x40, 0x39, 0x5c, 0xc5,
-+	0x9c
-+};
-+static const u8 xenc_assoc001[] __initconst = {
-+	0xf3, 0x33, 0x88, 0x86, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x4e, 0x91
-+};
-+static const u8 xenc_nonce001[] __initconst = {
-+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+	0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
-+	0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17
-+};
-+static const u8 xenc_key001[] __initconst = {
-+	0x1c, 0x92, 0x40, 0xa5, 0xeb, 0x55, 0xd3, 0x8a,
-+	0xf3, 0x33, 0x88, 0x86, 0x04, 0xf6, 0xb5, 0xf0,
-+	0x47, 0x39, 0x17, 0xc1, 0x40, 0x2b, 0x80, 0x09,
-+	0x9d, 0xca, 0x5c, 0xbc, 0x20, 0x70, 0x75, 0xc0
-+};
-+
-+static const struct chacha20poly1305_testvec
-+xchacha20poly1305_enc_vectors[] __initconst = {
-+	{ xenc_input001, xenc_output001, xenc_assoc001, xenc_nonce001, xenc_key001,
-+	  sizeof(xenc_input001), sizeof(xenc_assoc001), sizeof(xenc_nonce001) }
-+};
-+
-+static const u8 xdec_input001[] __initconst = {
-+	0x1a, 0x6e, 0x3a, 0xd9, 0xfd, 0x41, 0x3f, 0x77,
-+	0x54, 0x72, 0x0a, 0x70, 0x9a, 0xa0, 0x29, 0x92,
-+	0x2e, 0xed, 0x93, 0xcf, 0x0f, 0x71, 0x88, 0x18,
-+	0x7a, 0x9d, 0x2d, 0x24, 0xe0, 0xf5, 0xea, 0x3d,
-+	0x55, 0x64, 0xd7, 0xad, 0x2a, 0x1a, 0x1f, 0x7e,
-+	0x86, 0x6d, 0xb0, 0xce, 0x80, 0x41, 0x72, 0x86,
-+	0x26, 0xee, 0x84, 0xd7, 0xef, 0x82, 0x9e, 0xe2,
-+	0x60, 0x9d, 0x5a, 0xfc, 0xf0, 0xe4, 0x19, 0x85,
-+	0xea, 0x09, 0xc6, 0xfb, 0xb3, 0xa9, 0x50, 0x09,
-+	0xec, 0x5e, 0x11, 0x90, 0xa1, 0xc5, 0x4e, 0x49,
-+	0xef, 0x50, 0xd8, 0x8f, 0xe0, 0x78, 0xd7, 0xfd,
-+	0xb9, 0x3b, 0xc9, 0xf2, 0x91, 0xc8, 0x25, 0xc8,
-+	0xa7, 0x63, 0x60, 0xce, 0x10, 0xcd, 0xc6, 0x7f,
-+	0xf8, 0x16, 0xf8, 0xe1, 0x0a, 0xd9, 0xde, 0x79,
-+	0x50, 0x33, 0xf2, 0x16, 0x0f, 0x17, 0xba, 0xb8,
-+	0x5d, 0xd8, 0xdf, 0x4e, 0x51, 0xa8, 0x39, 0xd0,
-+	0x85, 0xca, 0x46, 0x6a, 0x10, 0xa7, 0xa3, 0x88,
-+	0xef, 0x79, 0xb9, 0xf8, 0x24, 0xf3, 0xe0, 0x71,
-+	0x7b, 0x76, 0x28, 0x46, 0x3a, 0x3a, 0x1b, 0x91,
-+	0xb6, 0xd4, 0x3e, 0x23, 0xe5, 0x44, 0x15, 0xbf,
-+	0x60, 0x43, 0x9d, 0xa4, 0xbb, 0xd5, 0x5f, 0x89,
-+	0xeb, 0xef, 0x8e, 0xfd, 0xdd, 0xb4, 0x0d, 0x46,
-+	0xf0, 0x69, 0x23, 0x63, 0xae, 0x94, 0xf5, 0x5e,
-+	0xa5, 0xad, 0x13, 0x1c, 0x41, 0x76, 0xe6, 0x90,
-+	0xd6, 0x6d, 0xa2, 0x8f, 0x97, 0x4c, 0xa8, 0x0b,
-+	0xcf, 0x8d, 0x43, 0x2b, 0x9c, 0x9b, 0xc5, 0x58,
-+	0xa5, 0xb6, 0x95, 0x9a, 0xbf, 0x81, 0xc6, 0x54,
-+	0xc9, 0x66, 0x0c, 0xe5, 0x4f, 0x6a, 0x53, 0xa1,
-+	0xe5, 0x0c, 0xba, 0x31, 0xde, 0x34, 0x64, 0x73,
-+	0x8a, 0x3b, 0xbd, 0x92, 0x01, 0xdb, 0x71, 0x69,
-+	0xf3, 0x58, 0x99, 0xbc, 0xd1, 0xcb, 0x4a, 0x05,
-+	0xe2, 0x58, 0x9c, 0x25, 0x17, 0xcd, 0xdc, 0x83,
-+	0xb7, 0xff, 0xfb, 0x09, 0x61, 0xad, 0xbf, 0x13,
-+	0x5b, 0x5e, 0xed, 0x46, 0x82, 0x6f, 0x22, 0xd8,
-+	0x93, 0xa6, 0x85, 0x5b, 0x40, 0x39, 0x5c, 0xc5,
-+	0x9c
-+};
-+static const u8 xdec_output001[] __initconst = {
-+	0x49, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x65, 0x74,
-+	0x2d, 0x44, 0x72, 0x61, 0x66, 0x74, 0x73, 0x20,
-+	0x61, 0x72, 0x65, 0x20, 0x64, 0x72, 0x61, 0x66,
-+	0x74, 0x20, 0x64, 0x6f, 0x63, 0x75, 0x6d, 0x65,
-+	0x6e, 0x74, 0x73, 0x20, 0x76, 0x61, 0x6c, 0x69,
-+	0x64, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x61, 0x20,
-+	0x6d, 0x61, 0x78, 0x69, 0x6d, 0x75, 0x6d, 0x20,
-+	0x6f, 0x66, 0x20, 0x73, 0x69, 0x78, 0x20, 0x6d,
-+	0x6f, 0x6e, 0x74, 0x68, 0x73, 0x20, 0x61, 0x6e,
-+	0x64, 0x20, 0x6d, 0x61, 0x79, 0x20, 0x62, 0x65,
-+	0x20, 0x75, 0x70, 0x64, 0x61, 0x74, 0x65, 0x64,
-+	0x2c, 0x20, 0x72, 0x65, 0x70, 0x6c, 0x61, 0x63,
-+	0x65, 0x64, 0x2c, 0x20, 0x6f, 0x72, 0x20, 0x6f,
-+	0x62, 0x73, 0x6f, 0x6c, 0x65, 0x74, 0x65, 0x64,
-+	0x20, 0x62, 0x79, 0x20, 0x6f, 0x74, 0x68, 0x65,
-+	0x72, 0x20, 0x64, 0x6f, 0x63, 0x75, 0x6d, 0x65,
-+	0x6e, 0x74, 0x73, 0x20, 0x61, 0x74, 0x20, 0x61,
-+	0x6e, 0x79, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x2e,
-+	0x20, 0x49, 0x74, 0x20, 0x69, 0x73, 0x20, 0x69,
-+	0x6e, 0x61, 0x70, 0x70, 0x72, 0x6f, 0x70, 0x72,
-+	0x69, 0x61, 0x74, 0x65, 0x20, 0x74, 0x6f, 0x20,
-+	0x75, 0x73, 0x65, 0x20, 0x49, 0x6e, 0x74, 0x65,
-+	0x72, 0x6e, 0x65, 0x74, 0x2d, 0x44, 0x72, 0x61,
-+	0x66, 0x74, 0x73, 0x20, 0x61, 0x73, 0x20, 0x72,
-+	0x65, 0x66, 0x65, 0x72, 0x65, 0x6e, 0x63, 0x65,
-+	0x20, 0x6d, 0x61, 0x74, 0x65, 0x72, 0x69, 0x61,
-+	0x6c, 0x20, 0x6f, 0x72, 0x20, 0x74, 0x6f, 0x20,
-+	0x63, 0x69, 0x74, 0x65, 0x20, 0x74, 0x68, 0x65,
-+	0x6d, 0x20, 0x6f, 0x74, 0x68, 0x65, 0x72, 0x20,
-+	0x74, 0x68, 0x61, 0x6e, 0x20, 0x61, 0x73, 0x20,
-+	0x2f, 0xe2, 0x80, 0x9c, 0x77, 0x6f, 0x72, 0x6b,
-+	0x20, 0x69, 0x6e, 0x20, 0x70, 0x72, 0x6f, 0x67,
-+	0x72, 0x65, 0x73, 0x73, 0x2e, 0x2f, 0xe2, 0x80,
-+	0x9d
-+};
-+static const u8 xdec_assoc001[] __initconst = {
-+	0xf3, 0x33, 0x88, 0x86, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x4e, 0x91
-+};
-+static const u8 xdec_nonce001[] __initconst = {
-+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+	0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
-+	0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17
-+};
-+static const u8 xdec_key001[] __initconst = {
-+	0x1c, 0x92, 0x40, 0xa5, 0xeb, 0x55, 0xd3, 0x8a,
-+	0xf3, 0x33, 0x88, 0x86, 0x04, 0xf6, 0xb5, 0xf0,
-+	0x47, 0x39, 0x17, 0xc1, 0x40, 0x2b, 0x80, 0x09,
-+	0x9d, 0xca, 0x5c, 0xbc, 0x20, 0x70, 0x75, 0xc0
-+};
-+
-+static const struct chacha20poly1305_testvec
-+xchacha20poly1305_dec_vectors[] __initconst = {
-+	{ xdec_input001, xdec_output001, xdec_assoc001, xdec_nonce001, xdec_key001,
-+	  sizeof(xdec_input001), sizeof(xdec_assoc001), sizeof(xdec_nonce001) }
-+};
-+
-+static void __init
-+chacha20poly1305_selftest_encrypt(u8 *dst, const u8 *src, const size_t src_len,
-+				  const u8 *ad, const size_t ad_len,
-+				  const u8 *nonce, const size_t nonce_len,
-+				  const u8 key[CHACHA20POLY1305_KEY_SIZE])
-+{
-+	if (nonce_len == 8)
-+		chacha20poly1305_encrypt(dst, src, src_len, ad, ad_len,
-+					 get_unaligned_le64(nonce), key);
-+	else
-+		BUG();
-+}
-+
-+static bool __init
-+decryption_success(bool func_ret, bool expect_failure, int memcmp_result)
-+{
-+	if (expect_failure)
-+		return !func_ret;
-+	return func_ret && !memcmp_result;
-+}
-+
-+bool __init chacha20poly1305_selftest(void)
-+{
-+	enum { MAXIMUM_TEST_BUFFER_LEN = 1UL << 12 };
-+	size_t i;
-+	u8 *computed_output = NULL, *heap_src = NULL;
-+	bool success = true, ret;
-+
-+	heap_src = kmalloc(MAXIMUM_TEST_BUFFER_LEN, GFP_KERNEL);
-+	computed_output = kmalloc(MAXIMUM_TEST_BUFFER_LEN, GFP_KERNEL);
-+	if (!heap_src || !computed_output) {
-+		pr_err("chacha20poly1305 self-test malloc: FAIL\n");
-+		success = false;
-+		goto out;
-+	}
-+
-+	for (i = 0; i < ARRAY_SIZE(chacha20poly1305_enc_vectors); ++i) {
-+		memset(computed_output, 0, MAXIMUM_TEST_BUFFER_LEN);
-+		chacha20poly1305_selftest_encrypt(computed_output,
-+					chacha20poly1305_enc_vectors[i].input,
-+					chacha20poly1305_enc_vectors[i].ilen,
-+					chacha20poly1305_enc_vectors[i].assoc,
-+					chacha20poly1305_enc_vectors[i].alen,
-+					chacha20poly1305_enc_vectors[i].nonce,
-+					chacha20poly1305_enc_vectors[i].nlen,
-+					chacha20poly1305_enc_vectors[i].key);
-+		if (memcmp(computed_output,
-+			   chacha20poly1305_enc_vectors[i].output,
-+			   chacha20poly1305_enc_vectors[i].ilen +
-+							POLY1305_DIGEST_SIZE)) {
-+			pr_err("chacha20poly1305 encryption self-test %zu: FAIL\n",
-+			       i + 1);
-+			success = false;
-+		}
-+	}
-+
-+	for (i = 0; i < ARRAY_SIZE(chacha20poly1305_dec_vectors); ++i) {
-+		memset(computed_output, 0, MAXIMUM_TEST_BUFFER_LEN);
-+		ret = chacha20poly1305_decrypt(computed_output,
-+			chacha20poly1305_dec_vectors[i].input,
-+			chacha20poly1305_dec_vectors[i].ilen,
-+			chacha20poly1305_dec_vectors[i].assoc,
-+			chacha20poly1305_dec_vectors[i].alen,
-+			get_unaligned_le64(chacha20poly1305_dec_vectors[i].nonce),
-+			chacha20poly1305_dec_vectors[i].key);
-+		if (!decryption_success(ret,
-+				chacha20poly1305_dec_vectors[i].failure,
-+				memcmp(computed_output,
-+				       chacha20poly1305_dec_vectors[i].output,
-+				       chacha20poly1305_dec_vectors[i].ilen -
-+							POLY1305_DIGEST_SIZE))) {
-+			pr_err("chacha20poly1305 decryption self-test %zu: FAIL\n",
-+			       i + 1);
-+			success = false;
-+		}
-+	}
-+
-+
-+	for (i = 0; i < ARRAY_SIZE(xchacha20poly1305_enc_vectors); ++i) {
-+		memset(computed_output, 0, MAXIMUM_TEST_BUFFER_LEN);
-+		xchacha20poly1305_encrypt(computed_output,
-+					xchacha20poly1305_enc_vectors[i].input,
-+					xchacha20poly1305_enc_vectors[i].ilen,
-+					xchacha20poly1305_enc_vectors[i].assoc,
-+					xchacha20poly1305_enc_vectors[i].alen,
-+					xchacha20poly1305_enc_vectors[i].nonce,
-+					xchacha20poly1305_enc_vectors[i].key);
-+		if (memcmp(computed_output,
-+			   xchacha20poly1305_enc_vectors[i].output,
-+			   xchacha20poly1305_enc_vectors[i].ilen +
-+							POLY1305_DIGEST_SIZE)) {
-+			pr_err("xchacha20poly1305 encryption self-test %zu: FAIL\n",
-+			       i + 1);
-+			success = false;
-+		}
-+	}
-+	for (i = 0; i < ARRAY_SIZE(xchacha20poly1305_dec_vectors); ++i) {
-+		memset(computed_output, 0, MAXIMUM_TEST_BUFFER_LEN);
-+		ret = xchacha20poly1305_decrypt(computed_output,
-+					xchacha20poly1305_dec_vectors[i].input,
-+					xchacha20poly1305_dec_vectors[i].ilen,
-+					xchacha20poly1305_dec_vectors[i].assoc,
-+					xchacha20poly1305_dec_vectors[i].alen,
-+					xchacha20poly1305_dec_vectors[i].nonce,
-+					xchacha20poly1305_dec_vectors[i].key);
-+		if (!decryption_success(ret,
-+				xchacha20poly1305_dec_vectors[i].failure,
-+				memcmp(computed_output,
-+				       xchacha20poly1305_dec_vectors[i].output,
-+				       xchacha20poly1305_dec_vectors[i].ilen -
-+							POLY1305_DIGEST_SIZE))) {
-+			pr_err("xchacha20poly1305 decryption self-test %zu: FAIL\n",
-+			       i + 1);
-+			success = false;
-+		}
-+	}
-+
-+out:
-+	kfree(heap_src);
-+	kfree(computed_output);
-+	return success;
-+}
---- /dev/null
-+++ b/lib/crypto/chacha20poly1305.c
-@@ -0,0 +1,219 @@
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ *
-+ * This is an implementation of the ChaCha20Poly1305 AEAD construction.
-+ *
-+ * Information: https://tools.ietf.org/html/rfc8439
-+ */
-+
-+#include <crypto/algapi.h>
-+#include <crypto/chacha20poly1305.h>
-+#include <crypto/chacha.h>
-+#include <crypto/poly1305.h>
-+
-+#include <asm/unaligned.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+
-+#define CHACHA_KEY_WORDS	(CHACHA_KEY_SIZE / sizeof(u32))
-+
-+bool __init chacha20poly1305_selftest(void);
-+
-+static void chacha_load_key(u32 *k, const u8 *in)
-+{
-+	k[0] = get_unaligned_le32(in);
-+	k[1] = get_unaligned_le32(in + 4);
-+	k[2] = get_unaligned_le32(in + 8);
-+	k[3] = get_unaligned_le32(in + 12);
-+	k[4] = get_unaligned_le32(in + 16);
-+	k[5] = get_unaligned_le32(in + 20);
-+	k[6] = get_unaligned_le32(in + 24);
-+	k[7] = get_unaligned_le32(in + 28);
-+}
-+
-+static void xchacha_init(u32 *chacha_state, const u8 *key, const u8 *nonce)
-+{
-+	u32 k[CHACHA_KEY_WORDS];
-+	u8 iv[CHACHA_IV_SIZE];
-+
-+	memset(iv, 0, 8);
-+	memcpy(iv + 8, nonce + 16, 8);
-+
-+	chacha_load_key(k, key);
-+
-+	/* Compute the subkey given the original key and first 128 nonce bits */
-+	chacha_init(chacha_state, k, nonce);
-+	hchacha_block(chacha_state, k, 20);
-+
-+	chacha_init(chacha_state, k, iv);
-+
-+	memzero_explicit(k, sizeof(k));
-+	memzero_explicit(iv, sizeof(iv));
-+}
-+
-+static void
-+__chacha20poly1305_encrypt(u8 *dst, const u8 *src, const size_t src_len,
-+			   const u8 *ad, const size_t ad_len, u32 *chacha_state)
-+{
-+	const u8 *pad0 = page_address(ZERO_PAGE(0));
-+	struct poly1305_desc_ctx poly1305_state;
-+	union {
-+		u8 block0[POLY1305_KEY_SIZE];
-+		__le64 lens[2];
-+	} b;
-+
-+	chacha_crypt(chacha_state, b.block0, pad0, sizeof(b.block0), 20);
-+	poly1305_init(&poly1305_state, b.block0);
-+
-+	poly1305_update(&poly1305_state, ad, ad_len);
-+	if (ad_len & 0xf)
-+		poly1305_update(&poly1305_state, pad0, 0x10 - (ad_len & 0xf));
-+
-+	chacha_crypt(chacha_state, dst, src, src_len, 20);
-+
-+	poly1305_update(&poly1305_state, dst, src_len);
-+	if (src_len & 0xf)
-+		poly1305_update(&poly1305_state, pad0, 0x10 - (src_len & 0xf));
-+
-+	b.lens[0] = cpu_to_le64(ad_len);
-+	b.lens[1] = cpu_to_le64(src_len);
-+	poly1305_update(&poly1305_state, (u8 *)b.lens, sizeof(b.lens));
-+
-+	poly1305_final(&poly1305_state, dst + src_len);
-+
-+	memzero_explicit(chacha_state, CHACHA_STATE_WORDS * sizeof(u32));
-+	memzero_explicit(&b, sizeof(b));
-+}
-+
-+void chacha20poly1305_encrypt(u8 *dst, const u8 *src, const size_t src_len,
-+			      const u8 *ad, const size_t ad_len,
-+			      const u64 nonce,
-+			      const u8 key[CHACHA20POLY1305_KEY_SIZE])
-+{
-+	u32 chacha_state[CHACHA_STATE_WORDS];
-+	u32 k[CHACHA_KEY_WORDS];
-+	__le64 iv[2];
-+
-+	chacha_load_key(k, key);
-+
-+	iv[0] = 0;
-+	iv[1] = cpu_to_le64(nonce);
-+
-+	chacha_init(chacha_state, k, (u8 *)iv);
-+	__chacha20poly1305_encrypt(dst, src, src_len, ad, ad_len, chacha_state);
-+
-+	memzero_explicit(iv, sizeof(iv));
-+	memzero_explicit(k, sizeof(k));
-+}
-+EXPORT_SYMBOL(chacha20poly1305_encrypt);
-+
-+void xchacha20poly1305_encrypt(u8 *dst, const u8 *src, const size_t src_len,
-+			       const u8 *ad, const size_t ad_len,
-+			       const u8 nonce[XCHACHA20POLY1305_NONCE_SIZE],
-+			       const u8 key[CHACHA20POLY1305_KEY_SIZE])
-+{
-+	u32 chacha_state[CHACHA_STATE_WORDS];
-+
-+	xchacha_init(chacha_state, key, nonce);
-+	__chacha20poly1305_encrypt(dst, src, src_len, ad, ad_len, chacha_state);
-+}
-+EXPORT_SYMBOL(xchacha20poly1305_encrypt);
-+
-+static bool
-+__chacha20poly1305_decrypt(u8 *dst, const u8 *src, const size_t src_len,
-+			   const u8 *ad, const size_t ad_len, u32 *chacha_state)
-+{
-+	const u8 *pad0 = page_address(ZERO_PAGE(0));
-+	struct poly1305_desc_ctx poly1305_state;
-+	size_t dst_len;
-+	int ret;
-+	union {
-+		u8 block0[POLY1305_KEY_SIZE];
-+		u8 mac[POLY1305_DIGEST_SIZE];
-+		__le64 lens[2];
-+	} b;
-+
-+	if (unlikely(src_len < POLY1305_DIGEST_SIZE))
-+		return false;
-+
-+	chacha_crypt(chacha_state, b.block0, pad0, sizeof(b.block0), 20);
-+	poly1305_init(&poly1305_state, b.block0);
-+
-+	poly1305_update(&poly1305_state, ad, ad_len);
-+	if (ad_len & 0xf)
-+		poly1305_update(&poly1305_state, pad0, 0x10 - (ad_len & 0xf));
-+
-+	dst_len = src_len - POLY1305_DIGEST_SIZE;
-+	poly1305_update(&poly1305_state, src, dst_len);
-+	if (dst_len & 0xf)
-+		poly1305_update(&poly1305_state, pad0, 0x10 - (dst_len & 0xf));
-+
-+	b.lens[0] = cpu_to_le64(ad_len);
-+	b.lens[1] = cpu_to_le64(dst_len);
-+	poly1305_update(&poly1305_state, (u8 *)b.lens, sizeof(b.lens));
-+
-+	poly1305_final(&poly1305_state, b.mac);
-+
-+	ret = crypto_memneq(b.mac, src + dst_len, POLY1305_DIGEST_SIZE);
-+	if (likely(!ret))
-+		chacha_crypt(chacha_state, dst, src, dst_len, 20);
-+
-+	memzero_explicit(&b, sizeof(b));
-+
-+	return !ret;
-+}
-+
-+bool chacha20poly1305_decrypt(u8 *dst, const u8 *src, const size_t src_len,
-+			      const u8 *ad, const size_t ad_len,
-+			      const u64 nonce,
-+			      const u8 key[CHACHA20POLY1305_KEY_SIZE])
-+{
-+	u32 chacha_state[CHACHA_STATE_WORDS];
-+	u32 k[CHACHA_KEY_WORDS];
-+	__le64 iv[2];
-+	bool ret;
-+
-+	chacha_load_key(k, key);
-+
-+	iv[0] = 0;
-+	iv[1] = cpu_to_le64(nonce);
-+
-+	chacha_init(chacha_state, k, (u8 *)iv);
-+	ret = __chacha20poly1305_decrypt(dst, src, src_len, ad, ad_len,
-+					 chacha_state);
-+
-+	memzero_explicit(chacha_state, sizeof(chacha_state));
-+	memzero_explicit(iv, sizeof(iv));
-+	memzero_explicit(k, sizeof(k));
-+	return ret;
-+}
-+EXPORT_SYMBOL(chacha20poly1305_decrypt);
-+
-+bool xchacha20poly1305_decrypt(u8 *dst, const u8 *src, const size_t src_len,
-+			       const u8 *ad, const size_t ad_len,
-+			       const u8 nonce[XCHACHA20POLY1305_NONCE_SIZE],
-+			       const u8 key[CHACHA20POLY1305_KEY_SIZE])
-+{
-+	u32 chacha_state[CHACHA_STATE_WORDS];
-+
-+	xchacha_init(chacha_state, key, nonce);
-+	return __chacha20poly1305_decrypt(dst, src, src_len, ad, ad_len,
-+					  chacha_state);
-+}
-+EXPORT_SYMBOL(xchacha20poly1305_decrypt);
-+
-+static int __init mod_init(void)
-+{
-+	if (!IS_ENABLED(CONFIG_CRYPTO_MANAGER_DISABLE_TESTS) &&
-+	    WARN_ON(!chacha20poly1305_selftest()))
-+		return -ENODEV;
-+	return 0;
-+}
-+
-+module_init(mod_init);
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("ChaCha20Poly1305 AEAD construction");
-+MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0033-crypto-lib-chacha20poly1305-reimplement-crypt_from_s.patch b/target/linux/generic/backport-5.4/080-wireguard-0033-crypto-lib-chacha20poly1305-reimplement-crypt_from_s.patch
deleted file mode 100644
index e4b2b58b82..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0033-crypto-lib-chacha20poly1305-reimplement-crypt_from_s.patch
+++ /dev/null
@@ -1,295 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 8 Nov 2019 13:22:40 +0100
-Subject: [PATCH] crypto: lib/chacha20poly1305 - reimplement crypt_from_sg()
- routine
-
-commit d95312a3ccc0cd544d374be2fc45aeaa803e5fd9 upstream.
-
-Reimplement the library routines to perform chacha20poly1305 en/decryption
-on scatterlists, without [ab]using the [deprecated] blkcipher interface,
-which is rather heavyweight and does things we don't really need.
-
-Instead, we use the sg_miter API in a novel and clever way, to iterate
-over the scatterlist in-place (i.e., source == destination, which is the
-only way this library is expected to be used). That way, we don't have to
-iterate over two scatterlists in parallel.
-
-Another optimization is that, instead of relying on the blkcipher walker
-to present the input in suitable chunks, we recognize that ChaCha is a
-streamcipher, and so we can simply deal with partial blocks by keeping a
-block of cipherstream on the stack and use crypto_xor() to mix it with
-the in/output.
-
-Finally, we omit the scatterwalk_and_copy() call if the last element of
-the scatterlist covers the MAC as well (which is the common case),
-avoiding the need to walk the scatterlist and kmap() the page twice.
-
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- include/crypto/chacha20poly1305.h      |  11 ++
- lib/crypto/chacha20poly1305-selftest.c |  45 ++++++++
- lib/crypto/chacha20poly1305.c          | 150 +++++++++++++++++++++++++
- 3 files changed, 206 insertions(+)
-
---- a/include/crypto/chacha20poly1305.h
-+++ b/include/crypto/chacha20poly1305.h
-@@ -7,6 +7,7 @@
- #define __CHACHA20POLY1305_H
- 
- #include <linux/types.h>
-+#include <linux/scatterlist.h>
- 
- enum chacha20poly1305_lengths {
- 	XCHACHA20POLY1305_NONCE_SIZE = 24,
-@@ -34,4 +35,14 @@ bool __must_check xchacha20poly1305_decr
- 	const size_t ad_len, const u8 nonce[XCHACHA20POLY1305_NONCE_SIZE],
- 	const u8 key[CHACHA20POLY1305_KEY_SIZE]);
- 
-+bool chacha20poly1305_encrypt_sg_inplace(struct scatterlist *src, size_t src_len,
-+					 const u8 *ad, const size_t ad_len,
-+					 const u64 nonce,
-+					 const u8 key[CHACHA20POLY1305_KEY_SIZE]);
-+
-+bool chacha20poly1305_decrypt_sg_inplace(struct scatterlist *src, size_t src_len,
-+					 const u8 *ad, const size_t ad_len,
-+					 const u64 nonce,
-+					 const u8 key[CHACHA20POLY1305_KEY_SIZE]);
-+
- #endif /* __CHACHA20POLY1305_H */
---- a/lib/crypto/chacha20poly1305-selftest.c
-+++ b/lib/crypto/chacha20poly1305-selftest.c
-@@ -7250,6 +7250,7 @@ bool __init chacha20poly1305_selftest(vo
- 	enum { MAXIMUM_TEST_BUFFER_LEN = 1UL << 12 };
- 	size_t i;
- 	u8 *computed_output = NULL, *heap_src = NULL;
-+	struct scatterlist sg_src;
- 	bool success = true, ret;
- 
- 	heap_src = kmalloc(MAXIMUM_TEST_BUFFER_LEN, GFP_KERNEL);
-@@ -7280,6 +7281,29 @@ bool __init chacha20poly1305_selftest(vo
- 		}
- 	}
- 
-+	for (i = 0; i < ARRAY_SIZE(chacha20poly1305_enc_vectors); ++i) {
-+		if (chacha20poly1305_enc_vectors[i].nlen != 8)
-+			continue;
-+		memcpy(heap_src, chacha20poly1305_enc_vectors[i].input,
-+		       chacha20poly1305_enc_vectors[i].ilen);
-+		sg_init_one(&sg_src, heap_src,
-+			    chacha20poly1305_enc_vectors[i].ilen + POLY1305_DIGEST_SIZE);
-+		chacha20poly1305_encrypt_sg_inplace(&sg_src,
-+			chacha20poly1305_enc_vectors[i].ilen,
-+			chacha20poly1305_enc_vectors[i].assoc,
-+			chacha20poly1305_enc_vectors[i].alen,
-+			get_unaligned_le64(chacha20poly1305_enc_vectors[i].nonce),
-+			chacha20poly1305_enc_vectors[i].key);
-+		if (memcmp(heap_src,
-+				   chacha20poly1305_enc_vectors[i].output,
-+				   chacha20poly1305_enc_vectors[i].ilen +
-+							POLY1305_DIGEST_SIZE)) {
-+			pr_err("chacha20poly1305 sg encryption self-test %zu: FAIL\n",
-+			       i + 1);
-+			success = false;
-+		}
-+	}
-+
- 	for (i = 0; i < ARRAY_SIZE(chacha20poly1305_dec_vectors); ++i) {
- 		memset(computed_output, 0, MAXIMUM_TEST_BUFFER_LEN);
- 		ret = chacha20poly1305_decrypt(computed_output,
-@@ -7301,6 +7325,27 @@ bool __init chacha20poly1305_selftest(vo
- 		}
- 	}
- 
-+	for (i = 0; i < ARRAY_SIZE(chacha20poly1305_dec_vectors); ++i) {
-+		memcpy(heap_src, chacha20poly1305_dec_vectors[i].input,
-+		       chacha20poly1305_dec_vectors[i].ilen);
-+		sg_init_one(&sg_src, heap_src,
-+			    chacha20poly1305_dec_vectors[i].ilen);
-+		ret = chacha20poly1305_decrypt_sg_inplace(&sg_src,
-+			chacha20poly1305_dec_vectors[i].ilen,
-+			chacha20poly1305_dec_vectors[i].assoc,
-+			chacha20poly1305_dec_vectors[i].alen,
-+			get_unaligned_le64(chacha20poly1305_dec_vectors[i].nonce),
-+			chacha20poly1305_dec_vectors[i].key);
-+		if (!decryption_success(ret,
-+			chacha20poly1305_dec_vectors[i].failure,
-+			memcmp(heap_src, chacha20poly1305_dec_vectors[i].output,
-+			       chacha20poly1305_dec_vectors[i].ilen -
-+							POLY1305_DIGEST_SIZE))) {
-+			pr_err("chacha20poly1305 sg decryption self-test %zu: FAIL\n",
-+			       i + 1);
-+			success = false;
-+		}
-+	}
- 
- 	for (i = 0; i < ARRAY_SIZE(xchacha20poly1305_enc_vectors); ++i) {
- 		memset(computed_output, 0, MAXIMUM_TEST_BUFFER_LEN);
---- a/lib/crypto/chacha20poly1305.c
-+++ b/lib/crypto/chacha20poly1305.c
-@@ -11,6 +11,7 @@
- #include <crypto/chacha20poly1305.h>
- #include <crypto/chacha.h>
- #include <crypto/poly1305.h>
-+#include <crypto/scatterwalk.h>
- 
- #include <asm/unaligned.h>
- #include <linux/kernel.h>
-@@ -205,6 +206,155 @@ bool xchacha20poly1305_decrypt(u8 *dst,
- }
- EXPORT_SYMBOL(xchacha20poly1305_decrypt);
- 
-+static
-+bool chacha20poly1305_crypt_sg_inplace(struct scatterlist *src,
-+				       const size_t src_len,
-+				       const u8 *ad, const size_t ad_len,
-+				       const u64 nonce,
-+				       const u8 key[CHACHA20POLY1305_KEY_SIZE],
-+				       int encrypt)
-+{
-+	const u8 *pad0 = page_address(ZERO_PAGE(0));
-+	struct poly1305_desc_ctx poly1305_state;
-+	u32 chacha_state[CHACHA_STATE_WORDS];
-+	struct sg_mapping_iter miter;
-+	size_t partial = 0;
-+	unsigned int flags;
-+	bool ret = true;
-+	int sl;
-+	union {
-+		struct {
-+			u32 k[CHACHA_KEY_WORDS];
-+			__le64 iv[2];
-+		};
-+		u8 block0[POLY1305_KEY_SIZE];
-+		u8 chacha_stream[CHACHA_BLOCK_SIZE];
-+		struct {
-+			u8 mac[2][POLY1305_DIGEST_SIZE];
-+		};
-+		__le64 lens[2];
-+	} b __aligned(16);
-+
-+	chacha_load_key(b.k, key);
-+
-+	b.iv[0] = 0;
-+	b.iv[1] = cpu_to_le64(nonce);
-+
-+	chacha_init(chacha_state, b.k, (u8 *)b.iv);
-+	chacha_crypt(chacha_state, b.block0, pad0, sizeof(b.block0), 20);
-+	poly1305_init(&poly1305_state, b.block0);
-+
-+	if (unlikely(ad_len)) {
-+		poly1305_update(&poly1305_state, ad, ad_len);
-+		if (ad_len & 0xf)
-+			poly1305_update(&poly1305_state, pad0, 0x10 - (ad_len & 0xf));
-+	}
-+
-+	flags = SG_MITER_TO_SG;
-+	if (!preemptible())
-+		flags |= SG_MITER_ATOMIC;
-+
-+	sg_miter_start(&miter, src, sg_nents(src), flags);
-+
-+	for (sl = src_len; sl > 0 && sg_miter_next(&miter); sl -= miter.length) {
-+		u8 *addr = miter.addr;
-+		size_t length = min_t(size_t, sl, miter.length);
-+
-+		if (!encrypt)
-+			poly1305_update(&poly1305_state, addr, length);
-+
-+		if (unlikely(partial)) {
-+			size_t l = min(length, CHACHA_BLOCK_SIZE - partial);
-+
-+			crypto_xor(addr, b.chacha_stream + partial, l);
-+			partial = (partial + l) & (CHACHA_BLOCK_SIZE - 1);
-+
-+			addr += l;
-+			length -= l;
-+		}
-+
-+		if (likely(length >= CHACHA_BLOCK_SIZE || length == sl)) {
-+			size_t l = length;
-+
-+			if (unlikely(length < sl))
-+				l &= ~(CHACHA_BLOCK_SIZE - 1);
-+			chacha_crypt(chacha_state, addr, addr, l, 20);
-+			addr += l;
-+			length -= l;
-+		}
-+
-+		if (unlikely(length > 0)) {
-+			chacha_crypt(chacha_state, b.chacha_stream, pad0,
-+				     CHACHA_BLOCK_SIZE, 20);
-+			crypto_xor(addr, b.chacha_stream, length);
-+			partial = length;
-+		}
-+
-+		if (encrypt)
-+			poly1305_update(&poly1305_state, miter.addr,
-+					min_t(size_t, sl, miter.length));
-+	}
-+
-+	if (src_len & 0xf)
-+		poly1305_update(&poly1305_state, pad0, 0x10 - (src_len & 0xf));
-+
-+	b.lens[0] = cpu_to_le64(ad_len);
-+	b.lens[1] = cpu_to_le64(src_len);
-+	poly1305_update(&poly1305_state, (u8 *)b.lens, sizeof(b.lens));
-+
-+	if (likely(sl <= -POLY1305_DIGEST_SIZE)) {
-+		if (encrypt) {
-+			poly1305_final(&poly1305_state,
-+				       miter.addr + miter.length + sl);
-+			ret = true;
-+		} else {
-+			poly1305_final(&poly1305_state, b.mac[0]);
-+			ret = !crypto_memneq(b.mac[0],
-+					     miter.addr + miter.length + sl,
-+					     POLY1305_DIGEST_SIZE);
-+		}
-+	}
-+
-+	sg_miter_stop(&miter);
-+
-+	if (unlikely(sl > -POLY1305_DIGEST_SIZE)) {
-+		poly1305_final(&poly1305_state, b.mac[1]);
-+		scatterwalk_map_and_copy(b.mac[encrypt], src, src_len,
-+					 sizeof(b.mac[1]), encrypt);
-+		ret = encrypt ||
-+		      !crypto_memneq(b.mac[0], b.mac[1], POLY1305_DIGEST_SIZE);
-+	}
-+
-+	memzero_explicit(chacha_state, sizeof(chacha_state));
-+	memzero_explicit(&b, sizeof(b));
-+
-+	return ret;
-+}
-+
-+bool chacha20poly1305_encrypt_sg_inplace(struct scatterlist *src, size_t src_len,
-+					 const u8 *ad, const size_t ad_len,
-+					 const u64 nonce,
-+					 const u8 key[CHACHA20POLY1305_KEY_SIZE])
-+{
-+	return chacha20poly1305_crypt_sg_inplace(src, src_len, ad, ad_len,
-+						 nonce, key, 1);
-+}
-+EXPORT_SYMBOL(chacha20poly1305_encrypt_sg_inplace);
-+
-+bool chacha20poly1305_decrypt_sg_inplace(struct scatterlist *src, size_t src_len,
-+					 const u8 *ad, const size_t ad_len,
-+					 const u64 nonce,
-+					 const u8 key[CHACHA20POLY1305_KEY_SIZE])
-+{
-+	if (unlikely(src_len < POLY1305_DIGEST_SIZE))
-+		return false;
-+
-+	return chacha20poly1305_crypt_sg_inplace(src,
-+						 src_len - POLY1305_DIGEST_SIZE,
-+						 ad, ad_len, nonce, key, 0);
-+}
-+EXPORT_SYMBOL(chacha20poly1305_decrypt_sg_inplace);
-+
- static int __init mod_init(void)
- {
- 	if (!IS_ENABLED(CONFIG_CRYPTO_MANAGER_DISABLE_TESTS) &&
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0034-crypto-chacha_generic-remove-unnecessary-setkey-func.patch b/target/linux/generic/backport-5.4/080-wireguard-0034-crypto-chacha_generic-remove-unnecessary-setkey-func.patch
deleted file mode 100644
index 709b1fbcf5..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0034-crypto-chacha_generic-remove-unnecessary-setkey-func.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Eric Biggers <ebiggers@google.com>
-Date: Sun, 17 Nov 2019 23:21:29 -0800
-Subject: [PATCH] crypto: chacha_generic - remove unnecessary setkey()
- functions
-
-commit 2043323a799a660bc84bbee404cf7a2617ec6157 upstream.
-
-Use chacha20_setkey() and chacha12_setkey() from
-<crypto/internal/chacha.h> instead of defining them again in
-chacha_generic.c.
-
-Signed-off-by: Eric Biggers <ebiggers@google.com>
-Acked-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- crypto/chacha_generic.c | 18 +++---------------
- 1 file changed, 3 insertions(+), 15 deletions(-)
-
---- a/crypto/chacha_generic.c
-+++ b/crypto/chacha_generic.c
-@@ -37,18 +37,6 @@ static int chacha_stream_xor(struct skci
- 	return err;
- }
- 
--static int crypto_chacha20_setkey(struct crypto_skcipher *tfm, const u8 *key,
--				  unsigned int keysize)
--{
--	return chacha_setkey(tfm, key, keysize, 20);
--}
--
--static int crypto_chacha12_setkey(struct crypto_skcipher *tfm, const u8 *key,
--				 unsigned int keysize)
--{
--	return chacha_setkey(tfm, key, keysize, 12);
--}
--
- static int crypto_chacha_crypt(struct skcipher_request *req)
- {
- 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-@@ -91,7 +79,7 @@ static struct skcipher_alg algs[] = {
- 		.max_keysize		= CHACHA_KEY_SIZE,
- 		.ivsize			= CHACHA_IV_SIZE,
- 		.chunksize		= CHACHA_BLOCK_SIZE,
--		.setkey			= crypto_chacha20_setkey,
-+		.setkey			= chacha20_setkey,
- 		.encrypt		= crypto_chacha_crypt,
- 		.decrypt		= crypto_chacha_crypt,
- 	}, {
-@@ -106,7 +94,7 @@ static struct skcipher_alg algs[] = {
- 		.max_keysize		= CHACHA_KEY_SIZE,
- 		.ivsize			= XCHACHA_IV_SIZE,
- 		.chunksize		= CHACHA_BLOCK_SIZE,
--		.setkey			= crypto_chacha20_setkey,
-+		.setkey			= chacha20_setkey,
- 		.encrypt		= crypto_xchacha_crypt,
- 		.decrypt		= crypto_xchacha_crypt,
- 	}, {
-@@ -121,7 +109,7 @@ static struct skcipher_alg algs[] = {
- 		.max_keysize		= CHACHA_KEY_SIZE,
- 		.ivsize			= XCHACHA_IV_SIZE,
- 		.chunksize		= CHACHA_BLOCK_SIZE,
--		.setkey			= crypto_chacha12_setkey,
-+		.setkey			= chacha12_setkey,
- 		.encrypt		= crypto_xchacha_crypt,
- 		.decrypt		= crypto_xchacha_crypt,
- 	}
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0035-crypto-x86-chacha-only-unregister-algorithms-if-regi.patch b/target/linux/generic/backport-5.4/080-wireguard-0035-crypto-x86-chacha-only-unregister-algorithms-if-regi.patch
deleted file mode 100644
index 4554ea898b..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0035-crypto-x86-chacha-only-unregister-algorithms-if-regi.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Eric Biggers <ebiggers@google.com>
-Date: Sun, 17 Nov 2019 23:21:58 -0800
-Subject: [PATCH] crypto: x86/chacha - only unregister algorithms if registered
-
-commit b62755aed3a3f5ca9edd2718339ccea3b6bbbe57 upstream.
-
-It's not valid to call crypto_unregister_skciphers() without a prior
-call to crypto_register_skciphers().
-
-Fixes: 84e03fa39fbe ("crypto: x86/chacha - expose SIMD ChaCha routine as library function")
-Signed-off-by: Eric Biggers <ebiggers@google.com>
-Acked-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/chacha_glue.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/x86/crypto/chacha_glue.c
-+++ b/arch/x86/crypto/chacha_glue.c
-@@ -304,7 +304,8 @@ static int __init chacha_simd_mod_init(v
- 
- static void __exit chacha_simd_mod_fini(void)
- {
--	crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
-+	if (boot_cpu_has(X86_FEATURE_SSSE3))
-+		crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
- }
- 
- module_init(chacha_simd_mod_init);
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0036-crypto-lib-chacha20poly1305-use-chacha20_crypt.patch b/target/linux/generic/backport-5.4/080-wireguard-0036-crypto-lib-chacha20poly1305-use-chacha20_crypt.patch
deleted file mode 100644
index 6ad20b999e..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0036-crypto-lib-chacha20poly1305-use-chacha20_crypt.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Eric Biggers <ebiggers@google.com>
-Date: Sun, 17 Nov 2019 23:22:16 -0800
-Subject: [PATCH] crypto: lib/chacha20poly1305 - use chacha20_crypt()
-
-commit 413808b71e6204b0cc1eeaa77960f7c3cd381d33 upstream.
-
-Use chacha20_crypt() instead of chacha_crypt(), since it's not really
-appropriate for users of the ChaCha library API to be passing the number
-of rounds as an argument.
-
-Signed-off-by: Eric Biggers <ebiggers@google.com>
-Acked-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- lib/crypto/chacha20poly1305.c | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
---- a/lib/crypto/chacha20poly1305.c
-+++ b/lib/crypto/chacha20poly1305.c
-@@ -66,14 +66,14 @@ __chacha20poly1305_encrypt(u8 *dst, cons
- 		__le64 lens[2];
- 	} b;
- 
--	chacha_crypt(chacha_state, b.block0, pad0, sizeof(b.block0), 20);
-+	chacha20_crypt(chacha_state, b.block0, pad0, sizeof(b.block0));
- 	poly1305_init(&poly1305_state, b.block0);
- 
- 	poly1305_update(&poly1305_state, ad, ad_len);
- 	if (ad_len & 0xf)
- 		poly1305_update(&poly1305_state, pad0, 0x10 - (ad_len & 0xf));
- 
--	chacha_crypt(chacha_state, dst, src, src_len, 20);
-+	chacha20_crypt(chacha_state, dst, src, src_len);
- 
- 	poly1305_update(&poly1305_state, dst, src_len);
- 	if (src_len & 0xf)
-@@ -140,7 +140,7 @@ __chacha20poly1305_decrypt(u8 *dst, cons
- 	if (unlikely(src_len < POLY1305_DIGEST_SIZE))
- 		return false;
- 
--	chacha_crypt(chacha_state, b.block0, pad0, sizeof(b.block0), 20);
-+	chacha20_crypt(chacha_state, b.block0, pad0, sizeof(b.block0));
- 	poly1305_init(&poly1305_state, b.block0);
- 
- 	poly1305_update(&poly1305_state, ad, ad_len);
-@@ -160,7 +160,7 @@ __chacha20poly1305_decrypt(u8 *dst, cons
- 
- 	ret = crypto_memneq(b.mac, src + dst_len, POLY1305_DIGEST_SIZE);
- 	if (likely(!ret))
--		chacha_crypt(chacha_state, dst, src, dst_len, 20);
-+		chacha20_crypt(chacha_state, dst, src, dst_len);
- 
- 	memzero_explicit(&b, sizeof(b));
- 
-@@ -241,7 +241,7 @@ bool chacha20poly1305_crypt_sg_inplace(s
- 	b.iv[1] = cpu_to_le64(nonce);
- 
- 	chacha_init(chacha_state, b.k, (u8 *)b.iv);
--	chacha_crypt(chacha_state, b.block0, pad0, sizeof(b.block0), 20);
-+	chacha20_crypt(chacha_state, b.block0, pad0, sizeof(b.block0));
- 	poly1305_init(&poly1305_state, b.block0);
- 
- 	if (unlikely(ad_len)) {
-@@ -278,14 +278,14 @@ bool chacha20poly1305_crypt_sg_inplace(s
- 
- 			if (unlikely(length < sl))
- 				l &= ~(CHACHA_BLOCK_SIZE - 1);
--			chacha_crypt(chacha_state, addr, addr, l, 20);
-+			chacha20_crypt(chacha_state, addr, addr, l);
- 			addr += l;
- 			length -= l;
- 		}
- 
- 		if (unlikely(length > 0)) {
--			chacha_crypt(chacha_state, b.chacha_stream, pad0,
--				     CHACHA_BLOCK_SIZE, 20);
-+			chacha20_crypt(chacha_state, b.chacha_stream, pad0,
-+				       CHACHA_BLOCK_SIZE);
- 			crypto_xor(addr, b.chacha_stream, length);
- 			partial = length;
- 		}
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0037-crypto-arch-conditionalize-crypto-api-in-arch-glue-f.patch b/target/linux/generic/backport-5.4/080-wireguard-0037-crypto-arch-conditionalize-crypto-api-in-arch-glue-f.patch
deleted file mode 100644
index d510438f1d..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0037-crypto-arch-conditionalize-crypto-api-in-arch-glue-f.patch
+++ /dev/null
@@ -1,275 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Mon, 25 Nov 2019 11:31:12 +0100
-Subject: [PATCH] crypto: arch - conditionalize crypto api in arch glue for lib
- code
-
-commit 8394bfec51e0e565556101bcc4e2fe7551104cd8 upstream.
-
-For glue code that's used by Zinc, the actual Crypto API functions might
-not necessarily exist, and don't need to exist either. Before this
-patch, there are valid build configurations that lead to a unbuildable
-kernel. This fixes it to conditionalize those symbols on the existence
-of the proper config entry.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Acked-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/chacha-glue.c        | 26 ++++++++++++++++----------
- arch/arm/crypto/curve25519-glue.c    |  5 +++--
- arch/arm/crypto/poly1305-glue.c      |  9 ++++++---
- arch/arm64/crypto/chacha-neon-glue.c |  5 +++--
- arch/arm64/crypto/poly1305-glue.c    |  5 +++--
- arch/mips/crypto/chacha-glue.c       |  6 ++++--
- arch/mips/crypto/poly1305-glue.c     |  6 ++++--
- arch/x86/crypto/blake2s-glue.c       |  6 ++++--
- arch/x86/crypto/chacha_glue.c        |  5 +++--
- arch/x86/crypto/curve25519-x86_64.c  |  7 ++++---
- arch/x86/crypto/poly1305_glue.c      |  5 +++--
- 11 files changed, 53 insertions(+), 32 deletions(-)
-
---- a/arch/arm/crypto/chacha-glue.c
-+++ b/arch/arm/crypto/chacha-glue.c
-@@ -286,11 +286,13 @@ static struct skcipher_alg neon_algs[] =
- 
- static int __init chacha_simd_mod_init(void)
- {
--	int err;
-+	int err = 0;
- 
--	err = crypto_register_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
--	if (err)
--		return err;
-+	if (IS_REACHABLE(CONFIG_CRYPTO_BLKCIPHER)) {
-+		err = crypto_register_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-+		if (err)
-+			return err;
-+	}
- 
- 	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON)) {
- 		int i;
-@@ -310,18 +312,22 @@ static int __init chacha_simd_mod_init(v
- 			static_branch_enable(&use_neon);
- 		}
- 
--		err = crypto_register_skciphers(neon_algs, ARRAY_SIZE(neon_algs));
--		if (err)
--			crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-+		if (IS_REACHABLE(CONFIG_CRYPTO_BLKCIPHER)) {
-+			err = crypto_register_skciphers(neon_algs, ARRAY_SIZE(neon_algs));
-+			if (err)
-+				crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-+		}
- 	}
- 	return err;
- }
- 
- static void __exit chacha_simd_mod_fini(void)
- {
--	crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
--	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON))
--		crypto_unregister_skciphers(neon_algs, ARRAY_SIZE(neon_algs));
-+	if (IS_REACHABLE(CONFIG_CRYPTO_BLKCIPHER)) {
-+		crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-+		if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON))
-+			crypto_unregister_skciphers(neon_algs, ARRAY_SIZE(neon_algs));
-+	}
- }
- 
- module_init(chacha_simd_mod_init);
---- a/arch/arm/crypto/curve25519-glue.c
-+++ b/arch/arm/crypto/curve25519-glue.c
-@@ -108,14 +108,15 @@ static int __init mod_init(void)
- {
- 	if (elf_hwcap & HWCAP_NEON) {
- 		static_branch_enable(&have_neon);
--		return crypto_register_kpp(&curve25519_alg);
-+		return IS_REACHABLE(CONFIG_CRYPTO_KPP) ?
-+			crypto_register_kpp(&curve25519_alg) : 0;
- 	}
- 	return 0;
- }
- 
- static void __exit mod_exit(void)
- {
--	if (elf_hwcap & HWCAP_NEON)
-+	if (IS_REACHABLE(CONFIG_CRYPTO_KPP) && elf_hwcap & HWCAP_NEON)
- 		crypto_unregister_kpp(&curve25519_alg);
- }
- 
---- a/arch/arm/crypto/poly1305-glue.c
-+++ b/arch/arm/crypto/poly1305-glue.c
-@@ -249,16 +249,19 @@ static int __init arm_poly1305_mod_init(
- 	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) &&
- 	    (elf_hwcap & HWCAP_NEON))
- 		static_branch_enable(&have_neon);
--	else
-+	else if (IS_REACHABLE(CONFIG_CRYPTO_HASH))
- 		/* register only the first entry */
- 		return crypto_register_shash(&arm_poly1305_algs[0]);
- 
--	return crypto_register_shashes(arm_poly1305_algs,
--				       ARRAY_SIZE(arm_poly1305_algs));
-+	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
-+		crypto_register_shashes(arm_poly1305_algs,
-+					ARRAY_SIZE(arm_poly1305_algs)) : 0;
- }
- 
- static void __exit arm_poly1305_mod_exit(void)
- {
-+	if (!IS_REACHABLE(CONFIG_CRYPTO_HASH))
-+		return;
- 	if (!static_branch_likely(&have_neon)) {
- 		crypto_unregister_shash(&arm_poly1305_algs[0]);
- 		return;
---- a/arch/arm64/crypto/chacha-neon-glue.c
-+++ b/arch/arm64/crypto/chacha-neon-glue.c
-@@ -211,12 +211,13 @@ static int __init chacha_simd_mod_init(v
- 
- 	static_branch_enable(&have_neon);
- 
--	return crypto_register_skciphers(algs, ARRAY_SIZE(algs));
-+	return IS_REACHABLE(CONFIG_CRYPTO_BLKCIPHER) ?
-+		crypto_register_skciphers(algs, ARRAY_SIZE(algs)) : 0;
- }
- 
- static void __exit chacha_simd_mod_fini(void)
- {
--	if (cpu_have_named_feature(ASIMD))
-+	if (IS_REACHABLE(CONFIG_CRYPTO_BLKCIPHER) && cpu_have_named_feature(ASIMD))
- 		crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
- }
- 
---- a/arch/arm64/crypto/poly1305-glue.c
-+++ b/arch/arm64/crypto/poly1305-glue.c
-@@ -220,12 +220,13 @@ static int __init neon_poly1305_mod_init
- 
- 	static_branch_enable(&have_neon);
- 
--	return crypto_register_shash(&neon_poly1305_alg);
-+	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
-+		crypto_register_shash(&neon_poly1305_alg) : 0;
- }
- 
- static void __exit neon_poly1305_mod_exit(void)
- {
--	if (cpu_have_named_feature(ASIMD))
-+	if (IS_REACHABLE(CONFIG_CRYPTO_HASH) && cpu_have_named_feature(ASIMD))
- 		crypto_unregister_shash(&neon_poly1305_alg);
- }
- 
---- a/arch/mips/crypto/chacha-glue.c
-+++ b/arch/mips/crypto/chacha-glue.c
-@@ -128,12 +128,14 @@ static struct skcipher_alg algs[] = {
- 
- static int __init chacha_simd_mod_init(void)
- {
--	return crypto_register_skciphers(algs, ARRAY_SIZE(algs));
-+	return IS_REACHABLE(CONFIG_CRYPTO_BLKCIPHER) ?
-+		crypto_register_skciphers(algs, ARRAY_SIZE(algs)) : 0;
- }
- 
- static void __exit chacha_simd_mod_fini(void)
- {
--	crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
-+	if (IS_REACHABLE(CONFIG_CRYPTO_BLKCIPHER))
-+		crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
- }
- 
- module_init(chacha_simd_mod_init);
---- a/arch/mips/crypto/poly1305-glue.c
-+++ b/arch/mips/crypto/poly1305-glue.c
-@@ -187,12 +187,14 @@ static struct shash_alg mips_poly1305_al
- 
- static int __init mips_poly1305_mod_init(void)
- {
--	return crypto_register_shash(&mips_poly1305_alg);
-+	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
-+		crypto_register_shash(&mips_poly1305_alg) : 0;
- }
- 
- static void __exit mips_poly1305_mod_exit(void)
- {
--	crypto_unregister_shash(&mips_poly1305_alg);
-+	if (IS_REACHABLE(CONFIG_CRYPTO_HASH))
-+		crypto_unregister_shash(&mips_poly1305_alg);
- }
- 
- module_init(mips_poly1305_mod_init);
---- a/arch/x86/crypto/blake2s-glue.c
-+++ b/arch/x86/crypto/blake2s-glue.c
-@@ -210,12 +210,14 @@ static int __init blake2s_mod_init(void)
- 			      XFEATURE_MASK_AVX512, NULL))
- 		static_branch_enable(&blake2s_use_avx512);
- 
--	return crypto_register_shashes(blake2s_algs, ARRAY_SIZE(blake2s_algs));
-+	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
-+		crypto_register_shashes(blake2s_algs,
-+					ARRAY_SIZE(blake2s_algs)) : 0;
- }
- 
- static void __exit blake2s_mod_exit(void)
- {
--	if (boot_cpu_has(X86_FEATURE_SSSE3))
-+	if (IS_REACHABLE(CONFIG_CRYPTO_HASH) && boot_cpu_has(X86_FEATURE_SSSE3))
- 		crypto_unregister_shashes(blake2s_algs, ARRAY_SIZE(blake2s_algs));
- }
- 
---- a/arch/x86/crypto/chacha_glue.c
-+++ b/arch/x86/crypto/chacha_glue.c
-@@ -299,12 +299,13 @@ static int __init chacha_simd_mod_init(v
- 		    boot_cpu_has(X86_FEATURE_AVX512BW)) /* kmovq */
- 			static_branch_enable(&chacha_use_avx512vl);
- 	}
--	return crypto_register_skciphers(algs, ARRAY_SIZE(algs));
-+	return IS_REACHABLE(CONFIG_CRYPTO_BLKCIPHER) ?
-+		crypto_register_skciphers(algs, ARRAY_SIZE(algs)) : 0;
- }
- 
- static void __exit chacha_simd_mod_fini(void)
- {
--	if (boot_cpu_has(X86_FEATURE_SSSE3))
-+	if (IS_REACHABLE(CONFIG_CRYPTO_BLKCIPHER) && boot_cpu_has(X86_FEATURE_SSSE3))
- 		crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
- }
- 
---- a/arch/x86/crypto/curve25519-x86_64.c
-+++ b/arch/x86/crypto/curve25519-x86_64.c
-@@ -2457,13 +2457,14 @@ static int __init curve25519_mod_init(vo
- 		static_branch_enable(&curve25519_use_adx);
- 	else
- 		return 0;
--	return crypto_register_kpp(&curve25519_alg);
-+	return IS_REACHABLE(CONFIG_CRYPTO_KPP) ?
-+		crypto_register_kpp(&curve25519_alg) : 0;
- }
- 
- static void __exit curve25519_mod_exit(void)
- {
--	if (boot_cpu_has(X86_FEATURE_BMI2) ||
--	    boot_cpu_has(X86_FEATURE_ADX))
-+	if (IS_REACHABLE(CONFIG_CRYPTO_KPP) &&
-+	    (boot_cpu_has(X86_FEATURE_BMI2) || boot_cpu_has(X86_FEATURE_ADX)))
- 		crypto_unregister_kpp(&curve25519_alg);
- }
- 
---- a/arch/x86/crypto/poly1305_glue.c
-+++ b/arch/x86/crypto/poly1305_glue.c
-@@ -224,12 +224,13 @@ static int __init poly1305_simd_mod_init
- 	    cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM, NULL))
- 		static_branch_enable(&poly1305_use_avx2);
- 
--	return crypto_register_shash(&alg);
-+	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ? crypto_register_shash(&alg) : 0;
- }
- 
- static void __exit poly1305_simd_mod_exit(void)
- {
--	crypto_unregister_shash(&alg);
-+	if (IS_REACHABLE(CONFIG_CRYPTO_HASH))
-+		crypto_unregister_shash(&alg);
- }
- 
- module_init(poly1305_simd_mod_init);
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0038-crypto-chacha-fix-warning-message-in-header-file.patch b/target/linux/generic/backport-5.4/080-wireguard-0038-crypto-chacha-fix-warning-message-in-header-file.patch
deleted file mode 100644
index ccd03e3525..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0038-crypto-chacha-fix-warning-message-in-header-file.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Valdis=20Kl=C4=93tnieks?= <valdis.kletnieks@vt.edu>
-Date: Thu, 5 Dec 2019 20:58:36 -0500
-Subject: [PATCH] crypto: chacha - fix warning message in header file
-
-commit 579d705cd64e44f3fcda1a6cfd5f37468a5ddf63 upstream.
-
-Building with W=1 causes a warning:
-
-  CC [M]  arch/x86/crypto/chacha_glue.o
-In file included from arch/x86/crypto/chacha_glue.c:10:
-./include/crypto/internal/chacha.h:37:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
-   37 | static int inline chacha12_setkey(struct crypto_skcipher *tfm, const u8 *key,
-      | ^~~~~~
-
-Straighten out the order to match the rest of the header file.
-
-Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- include/crypto/internal/chacha.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/crypto/internal/chacha.h
-+++ b/include/crypto/internal/chacha.h
-@@ -34,7 +34,7 @@ static inline int chacha20_setkey(struct
- 	return chacha_setkey(tfm, key, keysize, 20);
- }
- 
--static int inline chacha12_setkey(struct crypto_skcipher *tfm, const u8 *key,
-+static inline int chacha12_setkey(struct crypto_skcipher *tfm, const u8 *key,
- 				  unsigned int keysize)
- {
- 	return chacha_setkey(tfm, key, keysize, 12);
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0039-crypto-arm-curve25519-add-arch-specific-key-generati.patch b/target/linux/generic/backport-5.4/080-wireguard-0039-crypto-arm-curve25519-add-arch-specific-key-generati.patch
deleted file mode 100644
index 67de22deb6..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0039-crypto-arm-curve25519-add-arch-specific-key-generati.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Wed, 11 Dec 2019 10:26:39 +0100
-Subject: [PATCH] crypto: arm/curve25519 - add arch-specific key generation
- function
-
-commit 84faa307249b341f6ad8de3e1869d77a65e26669 upstream.
-
-Somehow this was forgotten when Zinc was being split into oddly shaped
-pieces, resulting in linker errors. The x86_64 glue has a specific key
-generation implementation, but the Arm one does not. However, it can
-still receive the NEON speedups by calling the ordinary DH function
-using the base point.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Acked-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/curve25519-glue.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/crypto/curve25519-glue.c
-+++ b/arch/arm/crypto/curve25519-glue.c
-@@ -38,6 +38,13 @@ void curve25519_arch(u8 out[CURVE25519_K
- }
- EXPORT_SYMBOL(curve25519_arch);
- 
-+void curve25519_base_arch(u8 pub[CURVE25519_KEY_SIZE],
-+			  const u8 secret[CURVE25519_KEY_SIZE])
-+{
-+	return curve25519_arch(pub, secret, curve25519_base_point);
-+}
-+EXPORT_SYMBOL(curve25519_base_arch);
-+
- static int curve25519_set_secret(struct crypto_kpp *tfm, const void *buf,
- 				 unsigned int len)
- {
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0040-crypto-lib-curve25519-re-add-selftests.patch b/target/linux/generic/backport-5.4/080-wireguard-0040-crypto-lib-curve25519-re-add-selftests.patch
deleted file mode 100644
index e43d196a3b..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0040-crypto-lib-curve25519-re-add-selftests.patch
+++ /dev/null
@@ -1,1387 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Mon, 16 Dec 2019 19:53:26 +0100
-Subject: [PATCH] crypto: lib/curve25519 - re-add selftests
-
-commit aa127963f1cab2b93c74c9b128a84610203fb674 upstream.
-
-Somehow these were dropped when Zinc was being integrated, which is
-problematic, because testing the library interface for Curve25519 is
-important.. This commit simply adds them back and wires them in in the
-same way that the blake2s selftests are wired in.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- lib/crypto/Makefile              |    1 +
- lib/crypto/curve25519-selftest.c | 1321 ++++++++++++++++++++++++++++++
- lib/crypto/curve25519.c          |   17 +
- 3 files changed, 1339 insertions(+)
- create mode 100644 lib/crypto/curve25519-selftest.c
-
---- a/lib/crypto/Makefile
-+++ b/lib/crypto/Makefile
-@@ -36,4 +36,5 @@ libsha256-y					:= sha256.o
- ifneq ($(CONFIG_CRYPTO_MANAGER_DISABLE_TESTS),y)
- libblake2s-y					+= blake2s-selftest.o
- libchacha20poly1305-y				+= chacha20poly1305-selftest.o
-+libcurve25519-y					+= curve25519-selftest.o
- endif
---- /dev/null
-+++ b/lib/crypto/curve25519-selftest.c
-@@ -0,0 +1,1321 @@
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include <crypto/curve25519.h>
-+
-+struct curve25519_test_vector {
-+	u8 private[CURVE25519_KEY_SIZE];
-+	u8 public[CURVE25519_KEY_SIZE];
-+	u8 result[CURVE25519_KEY_SIZE];
-+	bool valid;
-+};
-+static const struct curve25519_test_vector curve25519_test_vectors[] __initconst = {
-+	{
-+		.private = { 0x77, 0x07, 0x6d, 0x0a, 0x73, 0x18, 0xa5, 0x7d,
-+			     0x3c, 0x16, 0xc1, 0x72, 0x51, 0xb2, 0x66, 0x45,
-+			     0xdf, 0x4c, 0x2f, 0x87, 0xeb, 0xc0, 0x99, 0x2a,
-+			     0xb1, 0x77, 0xfb, 0xa5, 0x1d, 0xb9, 0x2c, 0x2a },
-+		.public = { 0xde, 0x9e, 0xdb, 0x7d, 0x7b, 0x7d, 0xc1, 0xb4,
-+			    0xd3, 0x5b, 0x61, 0xc2, 0xec, 0xe4, 0x35, 0x37,
-+			    0x3f, 0x83, 0x43, 0xc8, 0x5b, 0x78, 0x67, 0x4d,
-+			    0xad, 0xfc, 0x7e, 0x14, 0x6f, 0x88, 0x2b, 0x4f },
-+		.result = { 0x4a, 0x5d, 0x9d, 0x5b, 0xa4, 0xce, 0x2d, 0xe1,
-+			    0x72, 0x8e, 0x3b, 0xf4, 0x80, 0x35, 0x0f, 0x25,
-+			    0xe0, 0x7e, 0x21, 0xc9, 0x47, 0xd1, 0x9e, 0x33,
-+			    0x76, 0xf0, 0x9b, 0x3c, 0x1e, 0x16, 0x17, 0x42 },
-+		.valid = true
-+	},
-+	{
-+		.private = { 0x5d, 0xab, 0x08, 0x7e, 0x62, 0x4a, 0x8a, 0x4b,
-+			     0x79, 0xe1, 0x7f, 0x8b, 0x83, 0x80, 0x0e, 0xe6,
-+			     0x6f, 0x3b, 0xb1, 0x29, 0x26, 0x18, 0xb6, 0xfd,
-+			     0x1c, 0x2f, 0x8b, 0x27, 0xff, 0x88, 0xe0, 0xeb },
-+		.public = { 0x85, 0x20, 0xf0, 0x09, 0x89, 0x30, 0xa7, 0x54,
-+			    0x74, 0x8b, 0x7d, 0xdc, 0xb4, 0x3e, 0xf7, 0x5a,
-+			    0x0d, 0xbf, 0x3a, 0x0d, 0x26, 0x38, 0x1a, 0xf4,
-+			    0xeb, 0xa4, 0xa9, 0x8e, 0xaa, 0x9b, 0x4e, 0x6a },
-+		.result = { 0x4a, 0x5d, 0x9d, 0x5b, 0xa4, 0xce, 0x2d, 0xe1,
-+			    0x72, 0x8e, 0x3b, 0xf4, 0x80, 0x35, 0x0f, 0x25,
-+			    0xe0, 0x7e, 0x21, 0xc9, 0x47, 0xd1, 0x9e, 0x33,
-+			    0x76, 0xf0, 0x9b, 0x3c, 0x1e, 0x16, 0x17, 0x42 },
-+		.valid = true
-+	},
-+	{
-+		.private = { 1 },
-+		.public = { 0x25, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.result = { 0x3c, 0x77, 0x77, 0xca, 0xf9, 0x97, 0xb2, 0x64,
-+			    0x41, 0x60, 0x77, 0x66, 0x5b, 0x4e, 0x22, 0x9d,
-+			    0x0b, 0x95, 0x48, 0xdc, 0x0c, 0xd8, 0x19, 0x98,
-+			    0xdd, 0xcd, 0xc5, 0xc8, 0x53, 0x3c, 0x79, 0x7f },
-+		.valid = true
-+	},
-+	{
-+		.private = { 1 },
-+		.public = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+		.result = { 0xb3, 0x2d, 0x13, 0x62, 0xc2, 0x48, 0xd6, 0x2f,
-+			    0xe6, 0x26, 0x19, 0xcf, 0xf0, 0x4d, 0xd4, 0x3d,
-+			    0xb7, 0x3f, 0xfc, 0x1b, 0x63, 0x08, 0xed, 0xe3,
-+			    0x0b, 0x78, 0xd8, 0x73, 0x80, 0xf1, 0xe8, 0x34 },
-+		.valid = true
-+	},
-+	{
-+		.private = { 0xa5, 0x46, 0xe3, 0x6b, 0xf0, 0x52, 0x7c, 0x9d,
-+			     0x3b, 0x16, 0x15, 0x4b, 0x82, 0x46, 0x5e, 0xdd,
-+			     0x62, 0x14, 0x4c, 0x0a, 0xc1, 0xfc, 0x5a, 0x18,
-+			     0x50, 0x6a, 0x22, 0x44, 0xba, 0x44, 0x9a, 0xc4 },
-+		.public = { 0xe6, 0xdb, 0x68, 0x67, 0x58, 0x30, 0x30, 0xdb,
-+			    0x35, 0x94, 0xc1, 0xa4, 0x24, 0xb1, 0x5f, 0x7c,
-+			    0x72, 0x66, 0x24, 0xec, 0x26, 0xb3, 0x35, 0x3b,
-+			    0x10, 0xa9, 0x03, 0xa6, 0xd0, 0xab, 0x1c, 0x4c },
-+		.result = { 0xc3, 0xda, 0x55, 0x37, 0x9d, 0xe9, 0xc6, 0x90,
-+			    0x8e, 0x94, 0xea, 0x4d, 0xf2, 0x8d, 0x08, 0x4f,
-+			    0x32, 0xec, 0xcf, 0x03, 0x49, 0x1c, 0x71, 0xf7,
-+			    0x54, 0xb4, 0x07, 0x55, 0x77, 0xa2, 0x85, 0x52 },
-+		.valid = true
-+	},
-+	{
-+		.private = { 1, 2, 3, 4 },
-+		.public = { 0 },
-+		.result = { 0 },
-+		.valid = false
-+	},
-+	{
-+		.private = { 2, 4, 6, 8 },
-+		.public = { 0xe0, 0xeb, 0x7a, 0x7c, 0x3b, 0x41, 0xb8, 0xae,
-+			    0x16, 0x56, 0xe3, 0xfa, 0xf1, 0x9f, 0xc4, 0x6a,
-+			    0xda, 0x09, 0x8d, 0xeb, 0x9c, 0x32, 0xb1, 0xfd,
-+			    0x86, 0x62, 0x05, 0x16, 0x5f, 0x49, 0xb8 },
-+		.result = { 0 },
-+		.valid = false
-+	},
-+	{
-+		.private = { 0xff, 0xff, 0xff, 0xff, 0x0a, 0xff, 0xff, 0xff,
-+			     0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			     0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			     0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+		.public = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0x0a, 0x00, 0xfb, 0x9f },
-+		.result = { 0x77, 0x52, 0xb6, 0x18, 0xc1, 0x2d, 0x48, 0xd2,
-+			    0xc6, 0x93, 0x46, 0x83, 0x81, 0x7c, 0xc6, 0x57,
-+			    0xf3, 0x31, 0x03, 0x19, 0x49, 0x48, 0x20, 0x05,
-+			    0x42, 0x2b, 0x4e, 0xae, 0x8d, 0x1d, 0x43, 0x23 },
-+		.valid = true
-+	},
-+	{
-+		.private = { 0x8e, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.public = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8e, 0x06 },
-+		.result = { 0x5a, 0xdf, 0xaa, 0x25, 0x86, 0x8e, 0x32, 0x3d,
-+			    0xae, 0x49, 0x62, 0xc1, 0x01, 0x5c, 0xb3, 0x12,
-+			    0xe1, 0xc5, 0xc7, 0x9e, 0x95, 0x3f, 0x03, 0x99,
-+			    0xb0, 0xba, 0x16, 0x22, 0xf3, 0xb6, 0xf7, 0x0c },
-+		.valid = true
-+	},
-+	/* wycheproof - normal case */
-+	{
-+		.private = { 0x48, 0x52, 0x83, 0x4d, 0x9d, 0x6b, 0x77, 0xda,
-+			     0xde, 0xab, 0xaa, 0xf2, 0xe1, 0x1d, 0xca, 0x66,
-+			     0xd1, 0x9f, 0xe7, 0x49, 0x93, 0xa7, 0xbe, 0xc3,
-+			     0x6c, 0x6e, 0x16, 0xa0, 0x98, 0x3f, 0xea, 0xba },
-+		.public = { 0x9c, 0x64, 0x7d, 0x9a, 0xe5, 0x89, 0xb9, 0xf5,
-+			    0x8f, 0xdc, 0x3c, 0xa4, 0x94, 0x7e, 0xfb, 0xc9,
-+			    0x15, 0xc4, 0xb2, 0xe0, 0x8e, 0x74, 0x4a, 0x0e,
-+			    0xdf, 0x46, 0x9d, 0xac, 0x59, 0xc8, 0xf8, 0x5a },
-+		.result = { 0x87, 0xb7, 0xf2, 0x12, 0xb6, 0x27, 0xf7, 0xa5,
-+			    0x4c, 0xa5, 0xe0, 0xbc, 0xda, 0xdd, 0xd5, 0x38,
-+			    0x9d, 0x9d, 0xe6, 0x15, 0x6c, 0xdb, 0xcf, 0x8e,
-+			    0xbe, 0x14, 0xff, 0xbc, 0xfb, 0x43, 0x65, 0x51 },
-+		.valid = true
-+	},
-+	/* wycheproof - public key on twist */
-+	{
-+		.private = { 0x58, 0x8c, 0x06, 0x1a, 0x50, 0x80, 0x4a, 0xc4,
-+			     0x88, 0xad, 0x77, 0x4a, 0xc7, 0x16, 0xc3, 0xf5,
-+			     0xba, 0x71, 0x4b, 0x27, 0x12, 0xe0, 0x48, 0x49,
-+			     0x13, 0x79, 0xa5, 0x00, 0x21, 0x19, 0x98, 0xa8 },
-+		.public = { 0x63, 0xaa, 0x40, 0xc6, 0xe3, 0x83, 0x46, 0xc5,
-+			    0xca, 0xf2, 0x3a, 0x6d, 0xf0, 0xa5, 0xe6, 0xc8,
-+			    0x08, 0x89, 0xa0, 0x86, 0x47, 0xe5, 0x51, 0xb3,
-+			    0x56, 0x34, 0x49, 0xbe, 0xfc, 0xfc, 0x97, 0x33 },
-+		.result = { 0xb1, 0xa7, 0x07, 0x51, 0x94, 0x95, 0xff, 0xff,
-+			    0xb2, 0x98, 0xff, 0x94, 0x17, 0x16, 0xb0, 0x6d,
-+			    0xfa, 0xb8, 0x7c, 0xf8, 0xd9, 0x11, 0x23, 0xfe,
-+			    0x2b, 0xe9, 0xa2, 0x33, 0xdd, 0xa2, 0x22, 0x12 },
-+		.valid = true
-+	},
-+	/* wycheproof - public key on twist */
-+	{
-+		.private = { 0xb0, 0x5b, 0xfd, 0x32, 0xe5, 0x53, 0x25, 0xd9,
-+			     0xfd, 0x64, 0x8c, 0xb3, 0x02, 0x84, 0x80, 0x39,
-+			     0x00, 0x0b, 0x39, 0x0e, 0x44, 0xd5, 0x21, 0xe5,
-+			     0x8a, 0xab, 0x3b, 0x29, 0xa6, 0x96, 0x0b, 0xa8 },
-+		.public = { 0x0f, 0x83, 0xc3, 0x6f, 0xde, 0xd9, 0xd3, 0x2f,
-+			    0xad, 0xf4, 0xef, 0xa3, 0xae, 0x93, 0xa9, 0x0b,
-+			    0xb5, 0xcf, 0xa6, 0x68, 0x93, 0xbc, 0x41, 0x2c,
-+			    0x43, 0xfa, 0x72, 0x87, 0xdb, 0xb9, 0x97, 0x79 },
-+		.result = { 0x67, 0xdd, 0x4a, 0x6e, 0x16, 0x55, 0x33, 0x53,
-+			    0x4c, 0x0e, 0x3f, 0x17, 0x2e, 0x4a, 0xb8, 0x57,
-+			    0x6b, 0xca, 0x92, 0x3a, 0x5f, 0x07, 0xb2, 0xc0,
-+			    0x69, 0xb4, 0xc3, 0x10, 0xff, 0x2e, 0x93, 0x5b },
-+		.valid = true
-+	},
-+	/* wycheproof - public key on twist */
-+	{
-+		.private = { 0x70, 0xe3, 0x4b, 0xcb, 0xe1, 0xf4, 0x7f, 0xbc,
-+			     0x0f, 0xdd, 0xfd, 0x7c, 0x1e, 0x1a, 0xa5, 0x3d,
-+			     0x57, 0xbf, 0xe0, 0xf6, 0x6d, 0x24, 0x30, 0x67,
-+			     0xb4, 0x24, 0xbb, 0x62, 0x10, 0xbe, 0xd1, 0x9c },
-+		.public = { 0x0b, 0x82, 0x11, 0xa2, 0xb6, 0x04, 0x90, 0x97,
-+			    0xf6, 0x87, 0x1c, 0x6c, 0x05, 0x2d, 0x3c, 0x5f,
-+			    0xc1, 0xba, 0x17, 0xda, 0x9e, 0x32, 0xae, 0x45,
-+			    0x84, 0x03, 0xb0, 0x5b, 0xb2, 0x83, 0x09, 0x2a },
-+		.result = { 0x4a, 0x06, 0x38, 0xcf, 0xaa, 0x9e, 0xf1, 0x93,
-+			    0x3b, 0x47, 0xf8, 0x93, 0x92, 0x96, 0xa6, 0xb2,
-+			    0x5b, 0xe5, 0x41, 0xef, 0x7f, 0x70, 0xe8, 0x44,
-+			    0xc0, 0xbc, 0xc0, 0x0b, 0x13, 0x4d, 0xe6, 0x4a },
-+		.valid = true
-+	},
-+	/* wycheproof - public key on twist */
-+	{
-+		.private = { 0x68, 0xc1, 0xf3, 0xa6, 0x53, 0xa4, 0xcd, 0xb1,
-+			     0xd3, 0x7b, 0xba, 0x94, 0x73, 0x8f, 0x8b, 0x95,
-+			     0x7a, 0x57, 0xbe, 0xb2, 0x4d, 0x64, 0x6e, 0x99,
-+			     0x4d, 0xc2, 0x9a, 0x27, 0x6a, 0xad, 0x45, 0x8d },
-+		.public = { 0x34, 0x3a, 0xc2, 0x0a, 0x3b, 0x9c, 0x6a, 0x27,
-+			    0xb1, 0x00, 0x81, 0x76, 0x50, 0x9a, 0xd3, 0x07,
-+			    0x35, 0x85, 0x6e, 0xc1, 0xc8, 0xd8, 0xfc, 0xae,
-+			    0x13, 0x91, 0x2d, 0x08, 0xd1, 0x52, 0xf4, 0x6c },
-+		.result = { 0x39, 0x94, 0x91, 0xfc, 0xe8, 0xdf, 0xab, 0x73,
-+			    0xb4, 0xf9, 0xf6, 0x11, 0xde, 0x8e, 0xa0, 0xb2,
-+			    0x7b, 0x28, 0xf8, 0x59, 0x94, 0x25, 0x0b, 0x0f,
-+			    0x47, 0x5d, 0x58, 0x5d, 0x04, 0x2a, 0xc2, 0x07 },
-+		.valid = true
-+	},
-+	/* wycheproof - public key on twist */
-+	{
-+		.private = { 0xd8, 0x77, 0xb2, 0x6d, 0x06, 0xdf, 0xf9, 0xd9,
-+			     0xf7, 0xfd, 0x4c, 0x5b, 0x37, 0x69, 0xf8, 0xcd,
-+			     0xd5, 0xb3, 0x05, 0x16, 0xa5, 0xab, 0x80, 0x6b,
-+			     0xe3, 0x24, 0xff, 0x3e, 0xb6, 0x9e, 0xa0, 0xb2 },
-+		.public = { 0xfa, 0x69, 0x5f, 0xc7, 0xbe, 0x8d, 0x1b, 0xe5,
-+			    0xbf, 0x70, 0x48, 0x98, 0xf3, 0x88, 0xc4, 0x52,
-+			    0xba, 0xfd, 0xd3, 0xb8, 0xea, 0xe8, 0x05, 0xf8,
-+			    0x68, 0x1a, 0x8d, 0x15, 0xc2, 0xd4, 0xe1, 0x42 },
-+		.result = { 0x2c, 0x4f, 0xe1, 0x1d, 0x49, 0x0a, 0x53, 0x86,
-+			    0x17, 0x76, 0xb1, 0x3b, 0x43, 0x54, 0xab, 0xd4,
-+			    0xcf, 0x5a, 0x97, 0x69, 0x9d, 0xb6, 0xe6, 0xc6,
-+			    0x8c, 0x16, 0x26, 0xd0, 0x76, 0x62, 0xf7, 0x58 },
-+		.valid = true
-+	},
-+	/* wycheproof - public key = 0 */
-+	{
-+		.private = { 0x20, 0x74, 0x94, 0x03, 0x8f, 0x2b, 0xb8, 0x11,
-+			     0xd4, 0x78, 0x05, 0xbc, 0xdf, 0x04, 0xa2, 0xac,
-+			     0x58, 0x5a, 0xda, 0x7f, 0x2f, 0x23, 0x38, 0x9b,
-+			     0xfd, 0x46, 0x58, 0xf9, 0xdd, 0xd4, 0xde, 0xbc },
-+		.public = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = false
-+	},
-+	/* wycheproof - public key = 1 */
-+	{
-+		.private = { 0x20, 0x2e, 0x89, 0x72, 0xb6, 0x1c, 0x7e, 0x61,
-+			     0x93, 0x0e, 0xb9, 0x45, 0x0b, 0x50, 0x70, 0xea,
-+			     0xe1, 0xc6, 0x70, 0x47, 0x56, 0x85, 0x54, 0x1f,
-+			     0x04, 0x76, 0x21, 0x7e, 0x48, 0x18, 0xcf, 0xab },
-+		.public = { 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = false
-+	},
-+	/* wycheproof - edge case on twist */
-+	{
-+		.private = { 0x38, 0xdd, 0xe9, 0xf3, 0xe7, 0xb7, 0x99, 0x04,
-+			     0x5f, 0x9a, 0xc3, 0x79, 0x3d, 0x4a, 0x92, 0x77,
-+			     0xda, 0xde, 0xad, 0xc4, 0x1b, 0xec, 0x02, 0x90,
-+			     0xf8, 0x1f, 0x74, 0x4f, 0x73, 0x77, 0x5f, 0x84 },
-+		.public = { 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.result = { 0x9a, 0x2c, 0xfe, 0x84, 0xff, 0x9c, 0x4a, 0x97,
-+			    0x39, 0x62, 0x5c, 0xae, 0x4a, 0x3b, 0x82, 0xa9,
-+			    0x06, 0x87, 0x7a, 0x44, 0x19, 0x46, 0xf8, 0xd7,
-+			    0xb3, 0xd7, 0x95, 0xfe, 0x8f, 0x5d, 0x16, 0x39 },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case on twist */
-+	{
-+		.private = { 0x98, 0x57, 0xa9, 0x14, 0xe3, 0xc2, 0x90, 0x36,
-+			     0xfd, 0x9a, 0x44, 0x2b, 0xa5, 0x26, 0xb5, 0xcd,
-+			     0xcd, 0xf2, 0x82, 0x16, 0x15, 0x3e, 0x63, 0x6c,
-+			     0x10, 0x67, 0x7a, 0xca, 0xb6, 0xbd, 0x6a, 0xa5 },
-+		.public = { 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.result = { 0x4d, 0xa4, 0xe0, 0xaa, 0x07, 0x2c, 0x23, 0x2e,
-+			    0xe2, 0xf0, 0xfa, 0x4e, 0x51, 0x9a, 0xe5, 0x0b,
-+			    0x52, 0xc1, 0xed, 0xd0, 0x8a, 0x53, 0x4d, 0x4e,
-+			    0xf3, 0x46, 0xc2, 0xe1, 0x06, 0xd2, 0x1d, 0x60 },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case on twist */
-+	{
-+		.private = { 0x48, 0xe2, 0x13, 0x0d, 0x72, 0x33, 0x05, 0xed,
-+			     0x05, 0xe6, 0xe5, 0x89, 0x4d, 0x39, 0x8a, 0x5e,
-+			     0x33, 0x36, 0x7a, 0x8c, 0x6a, 0xac, 0x8f, 0xcd,
-+			     0xf0, 0xa8, 0x8e, 0x4b, 0x42, 0x82, 0x0d, 0xb7 },
-+		.public = { 0xff, 0xff, 0xff, 0x03, 0x00, 0x00, 0xf8, 0xff,
-+			    0xff, 0x1f, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff,
-+			    0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0x07, 0x00,
-+			    0x00, 0xf0, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00 },
-+		.result = { 0x9e, 0xd1, 0x0c, 0x53, 0x74, 0x7f, 0x64, 0x7f,
-+			    0x82, 0xf4, 0x51, 0x25, 0xd3, 0xde, 0x15, 0xa1,
-+			    0xe6, 0xb8, 0x24, 0x49, 0x6a, 0xb4, 0x04, 0x10,
-+			    0xff, 0xcc, 0x3c, 0xfe, 0x95, 0x76, 0x0f, 0x3b },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case on twist */
-+	{
-+		.private = { 0x28, 0xf4, 0x10, 0x11, 0x69, 0x18, 0x51, 0xb3,
-+			     0xa6, 0x2b, 0x64, 0x15, 0x53, 0xb3, 0x0d, 0x0d,
-+			     0xfd, 0xdc, 0xb8, 0xff, 0xfc, 0xf5, 0x37, 0x00,
-+			     0xa7, 0xbe, 0x2f, 0x6a, 0x87, 0x2e, 0x9f, 0xb0 },
-+		.public = { 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0x07, 0x00,
-+			    0x00, 0xe0, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00,
-+			    0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0xf8, 0xff,
-+			    0xff, 0x0f, 0x00, 0x00, 0xc0, 0xff, 0xff, 0x7f },
-+		.result = { 0xcf, 0x72, 0xb4, 0xaa, 0x6a, 0xa1, 0xc9, 0xf8,
-+			    0x94, 0xf4, 0x16, 0x5b, 0x86, 0x10, 0x9a, 0xa4,
-+			    0x68, 0x51, 0x76, 0x48, 0xe1, 0xf0, 0xcc, 0x70,
-+			    0xe1, 0xab, 0x08, 0x46, 0x01, 0x76, 0x50, 0x6b },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case on twist */
-+	{
-+		.private = { 0x18, 0xa9, 0x3b, 0x64, 0x99, 0xb9, 0xf6, 0xb3,
-+			     0x22, 0x5c, 0xa0, 0x2f, 0xef, 0x41, 0x0e, 0x0a,
-+			     0xde, 0xc2, 0x35, 0x32, 0x32, 0x1d, 0x2d, 0x8e,
-+			     0xf1, 0xa6, 0xd6, 0x02, 0xa8, 0xc6, 0x5b, 0x83 },
-+		.public = { 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+			    0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+			    0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-+			    0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0x7f },
-+		.result = { 0x5d, 0x50, 0xb6, 0x28, 0x36, 0xbb, 0x69, 0x57,
-+			    0x94, 0x10, 0x38, 0x6c, 0xf7, 0xbb, 0x81, 0x1c,
-+			    0x14, 0xbf, 0x85, 0xb1, 0xc7, 0xb1, 0x7e, 0x59,
-+			    0x24, 0xc7, 0xff, 0xea, 0x91, 0xef, 0x9e, 0x12 },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case on twist */
-+	{
-+		.private = { 0xc0, 0x1d, 0x13, 0x05, 0xa1, 0x33, 0x8a, 0x1f,
-+			     0xca, 0xc2, 0xba, 0x7e, 0x2e, 0x03, 0x2b, 0x42,
-+			     0x7e, 0x0b, 0x04, 0x90, 0x31, 0x65, 0xac, 0xa9,
-+			     0x57, 0xd8, 0xd0, 0x55, 0x3d, 0x87, 0x17, 0xb0 },
-+		.public = { 0xea, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+		.result = { 0x19, 0x23, 0x0e, 0xb1, 0x48, 0xd5, 0xd6, 0x7c,
-+			    0x3c, 0x22, 0xab, 0x1d, 0xae, 0xff, 0x80, 0xa5,
-+			    0x7e, 0xae, 0x42, 0x65, 0xce, 0x28, 0x72, 0x65,
-+			    0x7b, 0x2c, 0x80, 0x99, 0xfc, 0x69, 0x8e, 0x50 },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for public key */
-+	{
-+		.private = { 0x38, 0x6f, 0x7f, 0x16, 0xc5, 0x07, 0x31, 0xd6,
-+			     0x4f, 0x82, 0xe6, 0xa1, 0x70, 0xb1, 0x42, 0xa4,
-+			     0xe3, 0x4f, 0x31, 0xfd, 0x77, 0x68, 0xfc, 0xb8,
-+			     0x90, 0x29, 0x25, 0xe7, 0xd1, 0xe2, 0x1a, 0xbe },
-+		.public = { 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.result = { 0x0f, 0xca, 0xb5, 0xd8, 0x42, 0xa0, 0x78, 0xd7,
-+			    0xa7, 0x1f, 0xc5, 0x9b, 0x57, 0xbf, 0xb4, 0xca,
-+			    0x0b, 0xe6, 0x87, 0x3b, 0x49, 0xdc, 0xdb, 0x9f,
-+			    0x44, 0xe1, 0x4a, 0xe8, 0xfb, 0xdf, 0xa5, 0x42 },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for public key */
-+	{
-+		.private = { 0xe0, 0x23, 0xa2, 0x89, 0xbd, 0x5e, 0x90, 0xfa,
-+			     0x28, 0x04, 0xdd, 0xc0, 0x19, 0xa0, 0x5e, 0xf3,
-+			     0xe7, 0x9d, 0x43, 0x4b, 0xb6, 0xea, 0x2f, 0x52,
-+			     0x2e, 0xcb, 0x64, 0x3a, 0x75, 0x29, 0x6e, 0x95 },
-+		.public = { 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+			    0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+			    0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+			    0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00 },
-+		.result = { 0x54, 0xce, 0x8f, 0x22, 0x75, 0xc0, 0x77, 0xe3,
-+			    0xb1, 0x30, 0x6a, 0x39, 0x39, 0xc5, 0xe0, 0x3e,
-+			    0xef, 0x6b, 0xbb, 0x88, 0x06, 0x05, 0x44, 0x75,
-+			    0x8d, 0x9f, 0xef, 0x59, 0xb0, 0xbc, 0x3e, 0x4f },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for public key */
-+	{
-+		.private = { 0x68, 0xf0, 0x10, 0xd6, 0x2e, 0xe8, 0xd9, 0x26,
-+			     0x05, 0x3a, 0x36, 0x1c, 0x3a, 0x75, 0xc6, 0xea,
-+			     0x4e, 0xbd, 0xc8, 0x60, 0x6a, 0xb2, 0x85, 0x00,
-+			     0x3a, 0x6f, 0x8f, 0x40, 0x76, 0xb0, 0x1e, 0x83 },
-+		.public = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03 },
-+		.result = { 0xf1, 0x36, 0x77, 0x5c, 0x5b, 0xeb, 0x0a, 0xf8,
-+			    0x11, 0x0a, 0xf1, 0x0b, 0x20, 0x37, 0x23, 0x32,
-+			    0x04, 0x3c, 0xab, 0x75, 0x24, 0x19, 0x67, 0x87,
-+			    0x75, 0xa2, 0x23, 0xdf, 0x57, 0xc9, 0xd3, 0x0d },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for public key */
-+	{
-+		.private = { 0x58, 0xeb, 0xcb, 0x35, 0xb0, 0xf8, 0x84, 0x5c,
-+			     0xaf, 0x1e, 0xc6, 0x30, 0xf9, 0x65, 0x76, 0xb6,
-+			     0x2c, 0x4b, 0x7b, 0x6c, 0x36, 0xb2, 0x9d, 0xeb,
-+			     0x2c, 0xb0, 0x08, 0x46, 0x51, 0x75, 0x5c, 0x96 },
-+		.public = { 0xff, 0xff, 0xff, 0xfb, 0xff, 0xff, 0xfb, 0xff,
-+			    0xff, 0xdf, 0xff, 0xff, 0xdf, 0xff, 0xff, 0xff,
-+			    0xfe, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xf7, 0xff,
-+			    0xff, 0xf7, 0xff, 0xff, 0xbf, 0xff, 0xff, 0x3f },
-+		.result = { 0xbf, 0x9a, 0xff, 0xd0, 0x6b, 0x84, 0x40, 0x85,
-+			    0x58, 0x64, 0x60, 0x96, 0x2e, 0xf2, 0x14, 0x6f,
-+			    0xf3, 0xd4, 0x53, 0x3d, 0x94, 0x44, 0xaa, 0xb0,
-+			    0x06, 0xeb, 0x88, 0xcc, 0x30, 0x54, 0x40, 0x7d },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for public key */
-+	{
-+		.private = { 0x18, 0x8c, 0x4b, 0xc5, 0xb9, 0xc4, 0x4b, 0x38,
-+			     0xbb, 0x65, 0x8b, 0x9b, 0x2a, 0xe8, 0x2d, 0x5b,
-+			     0x01, 0x01, 0x5e, 0x09, 0x31, 0x84, 0xb1, 0x7c,
-+			     0xb7, 0x86, 0x35, 0x03, 0xa7, 0x83, 0xe1, 0xbb },
-+		.public = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f },
-+		.result = { 0xd4, 0x80, 0xde, 0x04, 0xf6, 0x99, 0xcb, 0x3b,
-+			    0xe0, 0x68, 0x4a, 0x9c, 0xc2, 0xe3, 0x12, 0x81,
-+			    0xea, 0x0b, 0xc5, 0xa9, 0xdc, 0xc1, 0x57, 0xd3,
-+			    0xd2, 0x01, 0x58, 0xd4, 0x6c, 0xa5, 0x24, 0x6d },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for public key */
-+	{
-+		.private = { 0xe0, 0x6c, 0x11, 0xbb, 0x2e, 0x13, 0xce, 0x3d,
-+			     0xc7, 0x67, 0x3f, 0x67, 0xf5, 0x48, 0x22, 0x42,
-+			     0x90, 0x94, 0x23, 0xa9, 0xae, 0x95, 0xee, 0x98,
-+			     0x6a, 0x98, 0x8d, 0x98, 0xfa, 0xee, 0x23, 0xa2 },
-+		.public = { 0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0x7f,
-+			    0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0x7f,
-+			    0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0x7f,
-+			    0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0x7f },
-+		.result = { 0x4c, 0x44, 0x01, 0xcc, 0xe6, 0xb5, 0x1e, 0x4c,
-+			    0xb1, 0x8f, 0x27, 0x90, 0x24, 0x6c, 0x9b, 0xf9,
-+			    0x14, 0xdb, 0x66, 0x77, 0x50, 0xa1, 0xcb, 0x89,
-+			    0x06, 0x90, 0x92, 0xaf, 0x07, 0x29, 0x22, 0x76 },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for public key */
-+	{
-+		.private = { 0xc0, 0x65, 0x8c, 0x46, 0xdd, 0xe1, 0x81, 0x29,
-+			     0x29, 0x38, 0x77, 0x53, 0x5b, 0x11, 0x62, 0xb6,
-+			     0xf9, 0xf5, 0x41, 0x4a, 0x23, 0xcf, 0x4d, 0x2c,
-+			     0xbc, 0x14, 0x0a, 0x4d, 0x99, 0xda, 0x2b, 0x8f },
-+		.public = { 0xeb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+		.result = { 0x57, 0x8b, 0xa8, 0xcc, 0x2d, 0xbd, 0xc5, 0x75,
-+			    0xaf, 0xcf, 0x9d, 0xf2, 0xb3, 0xee, 0x61, 0x89,
-+			    0xf5, 0x33, 0x7d, 0x68, 0x54, 0xc7, 0x9b, 0x4c,
-+			    0xe1, 0x65, 0xea, 0x12, 0x29, 0x3b, 0x3a, 0x0f },
-+		.valid = true
-+	},
-+	/* wycheproof - public key with low order */
-+	{
-+		.private = { 0x10, 0x25, 0x5c, 0x92, 0x30, 0xa9, 0x7a, 0x30,
-+			     0xa4, 0x58, 0xca, 0x28, 0x4a, 0x62, 0x96, 0x69,
-+			     0x29, 0x3a, 0x31, 0x89, 0x0c, 0xda, 0x9d, 0x14,
-+			     0x7f, 0xeb, 0xc7, 0xd1, 0xe2, 0x2d, 0x6b, 0xb1 },
-+		.public = { 0xe0, 0xeb, 0x7a, 0x7c, 0x3b, 0x41, 0xb8, 0xae,
-+			    0x16, 0x56, 0xe3, 0xfa, 0xf1, 0x9f, 0xc4, 0x6a,
-+			    0xda, 0x09, 0x8d, 0xeb, 0x9c, 0x32, 0xb1, 0xfd,
-+			    0x86, 0x62, 0x05, 0x16, 0x5f, 0x49, 0xb8, 0x00 },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = false
-+	},
-+	/* wycheproof - public key with low order */
-+	{
-+		.private = { 0x78, 0xf1, 0xe8, 0xed, 0xf1, 0x44, 0x81, 0xb3,
-+			     0x89, 0x44, 0x8d, 0xac, 0x8f, 0x59, 0xc7, 0x0b,
-+			     0x03, 0x8e, 0x7c, 0xf9, 0x2e, 0xf2, 0xc7, 0xef,
-+			     0xf5, 0x7a, 0x72, 0x46, 0x6e, 0x11, 0x52, 0x96 },
-+		.public = { 0x5f, 0x9c, 0x95, 0xbc, 0xa3, 0x50, 0x8c, 0x24,
-+			    0xb1, 0xd0, 0xb1, 0x55, 0x9c, 0x83, 0xef, 0x5b,
-+			    0x04, 0x44, 0x5c, 0xc4, 0x58, 0x1c, 0x8e, 0x86,
-+			    0xd8, 0x22, 0x4e, 0xdd, 0xd0, 0x9f, 0x11, 0x57 },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = false
-+	},
-+	/* wycheproof - public key with low order */
-+	{
-+		.private = { 0xa0, 0xa0, 0x5a, 0x3e, 0x8f, 0x9f, 0x44, 0x20,
-+			     0x4d, 0x5f, 0x80, 0x59, 0xa9, 0x4a, 0xc7, 0xdf,
-+			     0xc3, 0x9a, 0x49, 0xac, 0x01, 0x6d, 0xd7, 0x43,
-+			     0xdb, 0xfa, 0x43, 0xc5, 0xd6, 0x71, 0xfd, 0x88 },
-+		.public = { 0xec, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = false
-+	},
-+	/* wycheproof - public key with low order */
-+	{
-+		.private = { 0xd0, 0xdb, 0xb3, 0xed, 0x19, 0x06, 0x66, 0x3f,
-+			     0x15, 0x42, 0x0a, 0xf3, 0x1f, 0x4e, 0xaf, 0x65,
-+			     0x09, 0xd9, 0xa9, 0x94, 0x97, 0x23, 0x50, 0x06,
-+			     0x05, 0xad, 0x7c, 0x1c, 0x6e, 0x74, 0x50, 0xa9 },
-+		.public = { 0xed, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = false
-+	},
-+	/* wycheproof - public key with low order */
-+	{
-+		.private = { 0xc0, 0xb1, 0xd0, 0xeb, 0x22, 0xb2, 0x44, 0xfe,
-+			     0x32, 0x91, 0x14, 0x00, 0x72, 0xcd, 0xd9, 0xd9,
-+			     0x89, 0xb5, 0xf0, 0xec, 0xd9, 0x6c, 0x10, 0x0f,
-+			     0xeb, 0x5b, 0xca, 0x24, 0x1c, 0x1d, 0x9f, 0x8f },
-+		.public = { 0xee, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = false
-+	},
-+	/* wycheproof - public key with low order */
-+	{
-+		.private = { 0x48, 0x0b, 0xf4, 0x5f, 0x59, 0x49, 0x42, 0xa8,
-+			     0xbc, 0x0f, 0x33, 0x53, 0xc6, 0xe8, 0xb8, 0x85,
-+			     0x3d, 0x77, 0xf3, 0x51, 0xf1, 0xc2, 0xca, 0x6c,
-+			     0x2d, 0x1a, 0xbf, 0x8a, 0x00, 0xb4, 0x22, 0x9c },
-+		.public = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80 },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = false
-+	},
-+	/* wycheproof - public key with low order */
-+	{
-+		.private = { 0x30, 0xf9, 0x93, 0xfc, 0xf8, 0x51, 0x4f, 0xc8,
-+			     0x9b, 0xd8, 0xdb, 0x14, 0xcd, 0x43, 0xba, 0x0d,
-+			     0x4b, 0x25, 0x30, 0xe7, 0x3c, 0x42, 0x76, 0xa0,
-+			     0x5e, 0x1b, 0x14, 0x5d, 0x42, 0x0c, 0xed, 0xb4 },
-+		.public = { 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80 },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = false
-+	},
-+	/* wycheproof - public key with low order */
-+	{
-+		.private = { 0xc0, 0x49, 0x74, 0xb7, 0x58, 0x38, 0x0e, 0x2a,
-+			     0x5b, 0x5d, 0xf6, 0xeb, 0x09, 0xbb, 0x2f, 0x6b,
-+			     0x34, 0x34, 0xf9, 0x82, 0x72, 0x2a, 0x8e, 0x67,
-+			     0x6d, 0x3d, 0xa2, 0x51, 0xd1, 0xb3, 0xde, 0x83 },
-+		.public = { 0xe0, 0xeb, 0x7a, 0x7c, 0x3b, 0x41, 0xb8, 0xae,
-+			    0x16, 0x56, 0xe3, 0xfa, 0xf1, 0x9f, 0xc4, 0x6a,
-+			    0xda, 0x09, 0x8d, 0xeb, 0x9c, 0x32, 0xb1, 0xfd,
-+			    0x86, 0x62, 0x05, 0x16, 0x5f, 0x49, 0xb8, 0x80 },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = false
-+	},
-+	/* wycheproof - public key with low order */
-+	{
-+		.private = { 0x50, 0x2a, 0x31, 0x37, 0x3d, 0xb3, 0x24, 0x46,
-+			     0x84, 0x2f, 0xe5, 0xad, 0xd3, 0xe0, 0x24, 0x02,
-+			     0x2e, 0xa5, 0x4f, 0x27, 0x41, 0x82, 0xaf, 0xc3,
-+			     0xd9, 0xf1, 0xbb, 0x3d, 0x39, 0x53, 0x4e, 0xb5 },
-+		.public = { 0x5f, 0x9c, 0x95, 0xbc, 0xa3, 0x50, 0x8c, 0x24,
-+			    0xb1, 0xd0, 0xb1, 0x55, 0x9c, 0x83, 0xef, 0x5b,
-+			    0x04, 0x44, 0x5c, 0xc4, 0x58, 0x1c, 0x8e, 0x86,
-+			    0xd8, 0x22, 0x4e, 0xdd, 0xd0, 0x9f, 0x11, 0xd7 },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = false
-+	},
-+	/* wycheproof - public key with low order */
-+	{
-+		.private = { 0x90, 0xfa, 0x64, 0x17, 0xb0, 0xe3, 0x70, 0x30,
-+			     0xfd, 0x6e, 0x43, 0xef, 0xf2, 0xab, 0xae, 0xf1,
-+			     0x4c, 0x67, 0x93, 0x11, 0x7a, 0x03, 0x9c, 0xf6,
-+			     0x21, 0x31, 0x8b, 0xa9, 0x0f, 0x4e, 0x98, 0xbe },
-+		.public = { 0xec, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = false
-+	},
-+	/* wycheproof - public key with low order */
-+	{
-+		.private = { 0x78, 0xad, 0x3f, 0x26, 0x02, 0x7f, 0x1c, 0x9f,
-+			     0xdd, 0x97, 0x5a, 0x16, 0x13, 0xb9, 0x47, 0x77,
-+			     0x9b, 0xad, 0x2c, 0xf2, 0xb7, 0x41, 0xad, 0xe0,
-+			     0x18, 0x40, 0x88, 0x5a, 0x30, 0xbb, 0x97, 0x9c },
-+		.public = { 0xed, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = false
-+	},
-+	/* wycheproof - public key with low order */
-+	{
-+		.private = { 0x98, 0xe2, 0x3d, 0xe7, 0xb1, 0xe0, 0x92, 0x6e,
-+			     0xd9, 0xc8, 0x7e, 0x7b, 0x14, 0xba, 0xf5, 0x5f,
-+			     0x49, 0x7a, 0x1d, 0x70, 0x96, 0xf9, 0x39, 0x77,
-+			     0x68, 0x0e, 0x44, 0xdc, 0x1c, 0x7b, 0x7b, 0x8b },
-+		.public = { 0xee, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = false
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0xf0, 0x1e, 0x48, 0xda, 0xfa, 0xc9, 0xd7, 0xbc,
-+			     0xf5, 0x89, 0xcb, 0xc3, 0x82, 0xc8, 0x78, 0xd1,
-+			     0x8b, 0xda, 0x35, 0x50, 0x58, 0x9f, 0xfb, 0x5d,
-+			     0x50, 0xb5, 0x23, 0xbe, 0xbe, 0x32, 0x9d, 0xae },
-+		.public = { 0xef, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+		.result = { 0xbd, 0x36, 0xa0, 0x79, 0x0e, 0xb8, 0x83, 0x09,
-+			    0x8c, 0x98, 0x8b, 0x21, 0x78, 0x67, 0x73, 0xde,
-+			    0x0b, 0x3a, 0x4d, 0xf1, 0x62, 0x28, 0x2c, 0xf1,
-+			    0x10, 0xde, 0x18, 0xdd, 0x48, 0x4c, 0xe7, 0x4b },
-+		.valid = true
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0x28, 0x87, 0x96, 0xbc, 0x5a, 0xff, 0x4b, 0x81,
-+			     0xa3, 0x75, 0x01, 0x75, 0x7b, 0xc0, 0x75, 0x3a,
-+			     0x3c, 0x21, 0x96, 0x47, 0x90, 0xd3, 0x86, 0x99,
-+			     0x30, 0x8d, 0xeb, 0xc1, 0x7a, 0x6e, 0xaf, 0x8d },
-+		.public = { 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+		.result = { 0xb4, 0xe0, 0xdd, 0x76, 0xda, 0x7b, 0x07, 0x17,
-+			    0x28, 0xb6, 0x1f, 0x85, 0x67, 0x71, 0xaa, 0x35,
-+			    0x6e, 0x57, 0xed, 0xa7, 0x8a, 0x5b, 0x16, 0x55,
-+			    0xcc, 0x38, 0x20, 0xfb, 0x5f, 0x85, 0x4c, 0x5c },
-+		.valid = true
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0x98, 0xdf, 0x84, 0x5f, 0x66, 0x51, 0xbf, 0x11,
-+			     0x38, 0x22, 0x1f, 0x11, 0x90, 0x41, 0xf7, 0x2b,
-+			     0x6d, 0xbc, 0x3c, 0x4a, 0xce, 0x71, 0x43, 0xd9,
-+			     0x9f, 0xd5, 0x5a, 0xd8, 0x67, 0x48, 0x0d, 0xa8 },
-+		.public = { 0xf1, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+		.result = { 0x6f, 0xdf, 0x6c, 0x37, 0x61, 0x1d, 0xbd, 0x53,
-+			    0x04, 0xdc, 0x0f, 0x2e, 0xb7, 0xc9, 0x51, 0x7e,
-+			    0xb3, 0xc5, 0x0e, 0x12, 0xfd, 0x05, 0x0a, 0xc6,
-+			    0xde, 0xc2, 0x70, 0x71, 0xd4, 0xbf, 0xc0, 0x34 },
-+		.valid = true
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0xf0, 0x94, 0x98, 0xe4, 0x6f, 0x02, 0xf8, 0x78,
-+			     0x82, 0x9e, 0x78, 0xb8, 0x03, 0xd3, 0x16, 0xa2,
-+			     0xed, 0x69, 0x5d, 0x04, 0x98, 0xa0, 0x8a, 0xbd,
-+			     0xf8, 0x27, 0x69, 0x30, 0xe2, 0x4e, 0xdc, 0xb0 },
-+		.public = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+		.result = { 0x4c, 0x8f, 0xc4, 0xb1, 0xc6, 0xab, 0x88, 0xfb,
-+			    0x21, 0xf1, 0x8f, 0x6d, 0x4c, 0x81, 0x02, 0x40,
-+			    0xd4, 0xe9, 0x46, 0x51, 0xba, 0x44, 0xf7, 0xa2,
-+			    0xc8, 0x63, 0xce, 0xc7, 0xdc, 0x56, 0x60, 0x2d },
-+		.valid = true
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0x18, 0x13, 0xc1, 0x0a, 0x5c, 0x7f, 0x21, 0xf9,
-+			     0x6e, 0x17, 0xf2, 0x88, 0xc0, 0xcc, 0x37, 0x60,
-+			     0x7c, 0x04, 0xc5, 0xf5, 0xae, 0xa2, 0xdb, 0x13,
-+			     0x4f, 0x9e, 0x2f, 0xfc, 0x66, 0xbd, 0x9d, 0xb8 },
-+		.public = { 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80 },
-+		.result = { 0x1c, 0xd0, 0xb2, 0x82, 0x67, 0xdc, 0x54, 0x1c,
-+			    0x64, 0x2d, 0x6d, 0x7d, 0xca, 0x44, 0xa8, 0xb3,
-+			    0x8a, 0x63, 0x73, 0x6e, 0xef, 0x5c, 0x4e, 0x65,
-+			    0x01, 0xff, 0xbb, 0xb1, 0x78, 0x0c, 0x03, 0x3c },
-+		.valid = true
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0x78, 0x57, 0xfb, 0x80, 0x86, 0x53, 0x64, 0x5a,
-+			     0x0b, 0xeb, 0x13, 0x8a, 0x64, 0xf5, 0xf4, 0xd7,
-+			     0x33, 0xa4, 0x5e, 0xa8, 0x4c, 0x3c, 0xda, 0x11,
-+			     0xa9, 0xc0, 0x6f, 0x7e, 0x71, 0x39, 0x14, 0x9e },
-+		.public = { 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80 },
-+		.result = { 0x87, 0x55, 0xbe, 0x01, 0xc6, 0x0a, 0x7e, 0x82,
-+			    0x5c, 0xff, 0x3e, 0x0e, 0x78, 0xcb, 0x3a, 0xa4,
-+			    0x33, 0x38, 0x61, 0x51, 0x6a, 0xa5, 0x9b, 0x1c,
-+			    0x51, 0xa8, 0xb2, 0xa5, 0x43, 0xdf, 0xa8, 0x22 },
-+		.valid = true
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0xe0, 0x3a, 0xa8, 0x42, 0xe2, 0xab, 0xc5, 0x6e,
-+			     0x81, 0xe8, 0x7b, 0x8b, 0x9f, 0x41, 0x7b, 0x2a,
-+			     0x1e, 0x59, 0x13, 0xc7, 0x23, 0xee, 0xd2, 0x8d,
-+			     0x75, 0x2f, 0x8d, 0x47, 0xa5, 0x9f, 0x49, 0x8f },
-+		.public = { 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80 },
-+		.result = { 0x54, 0xc9, 0xa1, 0xed, 0x95, 0xe5, 0x46, 0xd2,
-+			    0x78, 0x22, 0xa3, 0x60, 0x93, 0x1d, 0xda, 0x60,
-+			    0xa1, 0xdf, 0x04, 0x9d, 0xa6, 0xf9, 0x04, 0x25,
-+			    0x3c, 0x06, 0x12, 0xbb, 0xdc, 0x08, 0x74, 0x76 },
-+		.valid = true
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0xf8, 0xf7, 0x07, 0xb7, 0x99, 0x9b, 0x18, 0xcb,
-+			     0x0d, 0x6b, 0x96, 0x12, 0x4f, 0x20, 0x45, 0x97,
-+			     0x2c, 0xa2, 0x74, 0xbf, 0xc1, 0x54, 0xad, 0x0c,
-+			     0x87, 0x03, 0x8c, 0x24, 0xc6, 0xd0, 0xd4, 0xb2 },
-+		.public = { 0xda, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+		.result = { 0xcc, 0x1f, 0x40, 0xd7, 0x43, 0xcd, 0xc2, 0x23,
-+			    0x0e, 0x10, 0x43, 0xda, 0xba, 0x8b, 0x75, 0xe8,
-+			    0x10, 0xf1, 0xfb, 0xab, 0x7f, 0x25, 0x52, 0x69,
-+			    0xbd, 0x9e, 0xbb, 0x29, 0xe6, 0xbf, 0x49, 0x4f },
-+		.valid = true
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0xa0, 0x34, 0xf6, 0x84, 0xfa, 0x63, 0x1e, 0x1a,
-+			     0x34, 0x81, 0x18, 0xc1, 0xce, 0x4c, 0x98, 0x23,
-+			     0x1f, 0x2d, 0x9e, 0xec, 0x9b, 0xa5, 0x36, 0x5b,
-+			     0x4a, 0x05, 0xd6, 0x9a, 0x78, 0x5b, 0x07, 0x96 },
-+		.public = { 0xdb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+		.result = { 0x54, 0x99, 0x8e, 0xe4, 0x3a, 0x5b, 0x00, 0x7b,
-+			    0xf4, 0x99, 0xf0, 0x78, 0xe7, 0x36, 0x52, 0x44,
-+			    0x00, 0xa8, 0xb5, 0xc7, 0xe9, 0xb9, 0xb4, 0x37,
-+			    0x71, 0x74, 0x8c, 0x7c, 0xdf, 0x88, 0x04, 0x12 },
-+		.valid = true
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0x30, 0xb6, 0xc6, 0xa0, 0xf2, 0xff, 0xa6, 0x80,
-+			     0x76, 0x8f, 0x99, 0x2b, 0xa8, 0x9e, 0x15, 0x2d,
-+			     0x5b, 0xc9, 0x89, 0x3d, 0x38, 0xc9, 0x11, 0x9b,
-+			     0xe4, 0xf7, 0x67, 0xbf, 0xab, 0x6e, 0x0c, 0xa5 },
-+		.public = { 0xdc, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+		.result = { 0xea, 0xd9, 0xb3, 0x8e, 0xfd, 0xd7, 0x23, 0x63,
-+			    0x79, 0x34, 0xe5, 0x5a, 0xb7, 0x17, 0xa7, 0xae,
-+			    0x09, 0xeb, 0x86, 0xa2, 0x1d, 0xc3, 0x6a, 0x3f,
-+			    0xee, 0xb8, 0x8b, 0x75, 0x9e, 0x39, 0x1e, 0x09 },
-+		.valid = true
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0x90, 0x1b, 0x9d, 0xcf, 0x88, 0x1e, 0x01, 0xe0,
-+			     0x27, 0x57, 0x50, 0x35, 0xd4, 0x0b, 0x43, 0xbd,
-+			     0xc1, 0xc5, 0x24, 0x2e, 0x03, 0x08, 0x47, 0x49,
-+			     0x5b, 0x0c, 0x72, 0x86, 0x46, 0x9b, 0x65, 0x91 },
-+		.public = { 0xea, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+		.result = { 0x60, 0x2f, 0xf4, 0x07, 0x89, 0xb5, 0x4b, 0x41,
-+			    0x80, 0x59, 0x15, 0xfe, 0x2a, 0x62, 0x21, 0xf0,
-+			    0x7a, 0x50, 0xff, 0xc2, 0xc3, 0xfc, 0x94, 0xcf,
-+			    0x61, 0xf1, 0x3d, 0x79, 0x04, 0xe8, 0x8e, 0x0e },
-+		.valid = true
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0x80, 0x46, 0x67, 0x7c, 0x28, 0xfd, 0x82, 0xc9,
-+			     0xa1, 0xbd, 0xb7, 0x1a, 0x1a, 0x1a, 0x34, 0xfa,
-+			     0xba, 0x12, 0x25, 0xe2, 0x50, 0x7f, 0xe3, 0xf5,
-+			     0x4d, 0x10, 0xbd, 0x5b, 0x0d, 0x86, 0x5f, 0x8e },
-+		.public = { 0xeb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+		.result = { 0xe0, 0x0a, 0xe8, 0xb1, 0x43, 0x47, 0x12, 0x47,
-+			    0xba, 0x24, 0xf1, 0x2c, 0x88, 0x55, 0x36, 0xc3,
-+			    0xcb, 0x98, 0x1b, 0x58, 0xe1, 0xe5, 0x6b, 0x2b,
-+			    0xaf, 0x35, 0xc1, 0x2a, 0xe1, 0xf7, 0x9c, 0x26 },
-+		.valid = true
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0x60, 0x2f, 0x7e, 0x2f, 0x68, 0xa8, 0x46, 0xb8,
-+			     0x2c, 0xc2, 0x69, 0xb1, 0xd4, 0x8e, 0x93, 0x98,
-+			     0x86, 0xae, 0x54, 0xfd, 0x63, 0x6c, 0x1f, 0xe0,
-+			     0x74, 0xd7, 0x10, 0x12, 0x7d, 0x47, 0x24, 0x91 },
-+		.public = { 0xef, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+		.result = { 0x98, 0xcb, 0x9b, 0x50, 0xdd, 0x3f, 0xc2, 0xb0,
-+			    0xd4, 0xf2, 0xd2, 0xbf, 0x7c, 0x5c, 0xfd, 0xd1,
-+			    0x0c, 0x8f, 0xcd, 0x31, 0xfc, 0x40, 0xaf, 0x1a,
-+			    0xd4, 0x4f, 0x47, 0xc1, 0x31, 0x37, 0x63, 0x62 },
-+		.valid = true
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0x60, 0x88, 0x7b, 0x3d, 0xc7, 0x24, 0x43, 0x02,
-+			     0x6e, 0xbe, 0xdb, 0xbb, 0xb7, 0x06, 0x65, 0xf4,
-+			     0x2b, 0x87, 0xad, 0xd1, 0x44, 0x0e, 0x77, 0x68,
-+			     0xfb, 0xd7, 0xe8, 0xe2, 0xce, 0x5f, 0x63, 0x9d },
-+		.public = { 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+		.result = { 0x38, 0xd6, 0x30, 0x4c, 0x4a, 0x7e, 0x6d, 0x9f,
-+			    0x79, 0x59, 0x33, 0x4f, 0xb5, 0x24, 0x5b, 0xd2,
-+			    0xc7, 0x54, 0x52, 0x5d, 0x4c, 0x91, 0xdb, 0x95,
-+			    0x02, 0x06, 0x92, 0x62, 0x34, 0xc1, 0xf6, 0x33 },
-+		.valid = true
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0x78, 0xd3, 0x1d, 0xfa, 0x85, 0x44, 0x97, 0xd7,
-+			     0x2d, 0x8d, 0xef, 0x8a, 0x1b, 0x7f, 0xb0, 0x06,
-+			     0xce, 0xc2, 0xd8, 0xc4, 0x92, 0x46, 0x47, 0xc9,
-+			     0x38, 0x14, 0xae, 0x56, 0xfa, 0xed, 0xa4, 0x95 },
-+		.public = { 0xf1, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+		.result = { 0x78, 0x6c, 0xd5, 0x49, 0x96, 0xf0, 0x14, 0xa5,
-+			    0xa0, 0x31, 0xec, 0x14, 0xdb, 0x81, 0x2e, 0xd0,
-+			    0x83, 0x55, 0x06, 0x1f, 0xdb, 0x5d, 0xe6, 0x80,
-+			    0xa8, 0x00, 0xac, 0x52, 0x1f, 0x31, 0x8e, 0x23 },
-+		.valid = true
-+	},
-+	/* wycheproof - public key >= p */
-+	{
-+		.private = { 0xc0, 0x4c, 0x5b, 0xae, 0xfa, 0x83, 0x02, 0xdd,
-+			     0xde, 0xd6, 0xa4, 0xbb, 0x95, 0x77, 0x61, 0xb4,
-+			     0xeb, 0x97, 0xae, 0xfa, 0x4f, 0xc3, 0xb8, 0x04,
-+			     0x30, 0x85, 0xf9, 0x6a, 0x56, 0x59, 0xb3, 0xa5 },
-+		.public = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
-+		.result = { 0x29, 0xae, 0x8b, 0xc7, 0x3e, 0x9b, 0x10, 0xa0,
-+			    0x8b, 0x4f, 0x68, 0x1c, 0x43, 0xc3, 0xe0, 0xac,
-+			    0x1a, 0x17, 0x1d, 0x31, 0xb3, 0x8f, 0x1a, 0x48,
-+			    0xef, 0xba, 0x29, 0xae, 0x63, 0x9e, 0xa1, 0x34 },
-+		.valid = true
-+	},
-+	/* wycheproof - RFC 7748 */
-+	{
-+		.private = { 0xa0, 0x46, 0xe3, 0x6b, 0xf0, 0x52, 0x7c, 0x9d,
-+			     0x3b, 0x16, 0x15, 0x4b, 0x82, 0x46, 0x5e, 0xdd,
-+			     0x62, 0x14, 0x4c, 0x0a, 0xc1, 0xfc, 0x5a, 0x18,
-+			     0x50, 0x6a, 0x22, 0x44, 0xba, 0x44, 0x9a, 0x44 },
-+		.public = { 0xe6, 0xdb, 0x68, 0x67, 0x58, 0x30, 0x30, 0xdb,
-+			    0x35, 0x94, 0xc1, 0xa4, 0x24, 0xb1, 0x5f, 0x7c,
-+			    0x72, 0x66, 0x24, 0xec, 0x26, 0xb3, 0x35, 0x3b,
-+			    0x10, 0xa9, 0x03, 0xa6, 0xd0, 0xab, 0x1c, 0x4c },
-+		.result = { 0xc3, 0xda, 0x55, 0x37, 0x9d, 0xe9, 0xc6, 0x90,
-+			    0x8e, 0x94, 0xea, 0x4d, 0xf2, 0x8d, 0x08, 0x4f,
-+			    0x32, 0xec, 0xcf, 0x03, 0x49, 0x1c, 0x71, 0xf7,
-+			    0x54, 0xb4, 0x07, 0x55, 0x77, 0xa2, 0x85, 0x52 },
-+		.valid = true
-+	},
-+	/* wycheproof - RFC 7748 */
-+	{
-+		.private = { 0x48, 0x66, 0xe9, 0xd4, 0xd1, 0xb4, 0x67, 0x3c,
-+			     0x5a, 0xd2, 0x26, 0x91, 0x95, 0x7d, 0x6a, 0xf5,
-+			     0xc1, 0x1b, 0x64, 0x21, 0xe0, 0xea, 0x01, 0xd4,
-+			     0x2c, 0xa4, 0x16, 0x9e, 0x79, 0x18, 0xba, 0x4d },
-+		.public = { 0xe5, 0x21, 0x0f, 0x12, 0x78, 0x68, 0x11, 0xd3,
-+			    0xf4, 0xb7, 0x95, 0x9d, 0x05, 0x38, 0xae, 0x2c,
-+			    0x31, 0xdb, 0xe7, 0x10, 0x6f, 0xc0, 0x3c, 0x3e,
-+			    0xfc, 0x4c, 0xd5, 0x49, 0xc7, 0x15, 0xa4, 0x13 },
-+		.result = { 0x95, 0xcb, 0xde, 0x94, 0x76, 0xe8, 0x90, 0x7d,
-+			    0x7a, 0xad, 0xe4, 0x5c, 0xb4, 0xb8, 0x73, 0xf8,
-+			    0x8b, 0x59, 0x5a, 0x68, 0x79, 0x9f, 0xa1, 0x52,
-+			    0xe6, 0xf8, 0xf7, 0x64, 0x7a, 0xac, 0x79, 0x57 },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for shared secret */
-+	{
-+		.private = { 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+			     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+			     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+			     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+		.public = { 0x0a, 0xb4, 0xe7, 0x63, 0x80, 0xd8, 0x4d, 0xde,
-+			    0x4f, 0x68, 0x33, 0xc5, 0x8f, 0x2a, 0x9f, 0xb8,
-+			    0xf8, 0x3b, 0xb0, 0x16, 0x9b, 0x17, 0x2b, 0xe4,
-+			    0xb6, 0xe0, 0x59, 0x28, 0x87, 0x74, 0x1a, 0x36 },
-+		.result = { 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for shared secret */
-+	{
-+		.private = { 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+			     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+			     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+			     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+		.public = { 0x89, 0xe1, 0x0d, 0x57, 0x01, 0xb4, 0x33, 0x7d,
-+			    0x2d, 0x03, 0x21, 0x81, 0x53, 0x8b, 0x10, 0x64,
-+			    0xbd, 0x40, 0x84, 0x40, 0x1c, 0xec, 0xa1, 0xfd,
-+			    0x12, 0x66, 0x3a, 0x19, 0x59, 0x38, 0x80, 0x00 },
-+		.result = { 0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for shared secret */
-+	{
-+		.private = { 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+			     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+			     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+			     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+		.public = { 0x2b, 0x55, 0xd3, 0xaa, 0x4a, 0x8f, 0x80, 0xc8,
-+			    0xc0, 0xb2, 0xae, 0x5f, 0x93, 0x3e, 0x85, 0xaf,
-+			    0x49, 0xbe, 0xac, 0x36, 0xc2, 0xfa, 0x73, 0x94,
-+			    0xba, 0xb7, 0x6c, 0x89, 0x33, 0xf8, 0xf8, 0x1d },
-+		.result = { 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for shared secret */
-+	{
-+		.private = { 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+			     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+			     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+			     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+		.public = { 0x63, 0xe5, 0xb1, 0xfe, 0x96, 0x01, 0xfe, 0x84,
-+			    0x38, 0x5d, 0x88, 0x66, 0xb0, 0x42, 0x12, 0x62,
-+			    0xf7, 0x8f, 0xbf, 0xa5, 0xaf, 0xf9, 0x58, 0x5e,
-+			    0x62, 0x66, 0x79, 0xb1, 0x85, 0x47, 0xd9, 0x59 },
-+		.result = { 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for shared secret */
-+	{
-+		.private = { 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+			     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+			     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+			     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+		.public = { 0xe4, 0x28, 0xf3, 0xda, 0xc1, 0x78, 0x09, 0xf8,
-+			    0x27, 0xa5, 0x22, 0xce, 0x32, 0x35, 0x50, 0x58,
-+			    0xd0, 0x73, 0x69, 0x36, 0x4a, 0xa7, 0x89, 0x02,
-+			    0xee, 0x10, 0x13, 0x9b, 0x9f, 0x9d, 0xd6, 0x53 },
-+		.result = { 0xfc, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for shared secret */
-+	{
-+		.private = { 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+			     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+			     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+			     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+		.public = { 0xb3, 0xb5, 0x0e, 0x3e, 0xd3, 0xa4, 0x07, 0xb9,
-+			    0x5d, 0xe9, 0x42, 0xef, 0x74, 0x57, 0x5b, 0x5a,
-+			    0xb8, 0xa1, 0x0c, 0x09, 0xee, 0x10, 0x35, 0x44,
-+			    0xd6, 0x0b, 0xdf, 0xed, 0x81, 0x38, 0xab, 0x2b },
-+		.result = { 0xf9, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for shared secret */
-+	{
-+		.private = { 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+			     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+			     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+			     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+		.public = { 0x21, 0x3f, 0xff, 0xe9, 0x3d, 0x5e, 0xa8, 0xcd,
-+			    0x24, 0x2e, 0x46, 0x28, 0x44, 0x02, 0x99, 0x22,
-+			    0xc4, 0x3c, 0x77, 0xc9, 0xe3, 0xe4, 0x2f, 0x56,
-+			    0x2f, 0x48, 0x5d, 0x24, 0xc5, 0x01, 0xa2, 0x0b },
-+		.result = { 0xf3, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for shared secret */
-+	{
-+		.private = { 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+			     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+			     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+			     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+		.public = { 0x91, 0xb2, 0x32, 0xa1, 0x78, 0xb3, 0xcd, 0x53,
-+			    0x09, 0x32, 0x44, 0x1e, 0x61, 0x39, 0x41, 0x8f,
-+			    0x72, 0x17, 0x22, 0x92, 0xf1, 0xda, 0x4c, 0x18,
-+			    0x34, 0xfc, 0x5e, 0xbf, 0xef, 0xb5, 0x1e, 0x3f },
-+		.result = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03 },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for shared secret */
-+	{
-+		.private = { 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+			     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+			     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+			     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+		.public = { 0x04, 0x5c, 0x6e, 0x11, 0xc5, 0xd3, 0x32, 0x55,
-+			    0x6c, 0x78, 0x22, 0xfe, 0x94, 0xeb, 0xf8, 0x9b,
-+			    0x56, 0xa3, 0x87, 0x8d, 0xc2, 0x7c, 0xa0, 0x79,
-+			    0x10, 0x30, 0x58, 0x84, 0x9f, 0xab, 0xcb, 0x4f },
-+		.result = { 0xe5, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for shared secret */
-+	{
-+		.private = { 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+			     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+			     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+			     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+		.public = { 0x1c, 0xa2, 0x19, 0x0b, 0x71, 0x16, 0x35, 0x39,
-+			    0x06, 0x3c, 0x35, 0x77, 0x3b, 0xda, 0x0c, 0x9c,
-+			    0x92, 0x8e, 0x91, 0x36, 0xf0, 0x62, 0x0a, 0xeb,
-+			    0x09, 0x3f, 0x09, 0x91, 0x97, 0xb7, 0xf7, 0x4e },
-+		.result = { 0xe3, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for shared secret */
-+	{
-+		.private = { 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+			     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+			     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+			     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+		.public = { 0xf7, 0x6e, 0x90, 0x10, 0xac, 0x33, 0xc5, 0x04,
-+			    0x3b, 0x2d, 0x3b, 0x76, 0xa8, 0x42, 0x17, 0x10,
-+			    0x00, 0xc4, 0x91, 0x62, 0x22, 0xe9, 0xe8, 0x58,
-+			    0x97, 0xa0, 0xae, 0xc7, 0xf6, 0x35, 0x0b, 0x3c },
-+		.result = { 0xdd, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for shared secret */
-+	{
-+		.private = { 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+			     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+			     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+			     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+		.public = { 0xbb, 0x72, 0x68, 0x8d, 0x8f, 0x8a, 0xa7, 0xa3,
-+			    0x9c, 0xd6, 0x06, 0x0c, 0xd5, 0xc8, 0x09, 0x3c,
-+			    0xde, 0xc6, 0xfe, 0x34, 0x19, 0x37, 0xc3, 0x88,
-+			    0x6a, 0x99, 0x34, 0x6c, 0xd0, 0x7f, 0xaa, 0x55 },
-+		.result = { 0xdb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for shared secret */
-+	{
-+		.private = { 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+			     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+			     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+			     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+		.public = { 0x88, 0xfd, 0xde, 0xa1, 0x93, 0x39, 0x1c, 0x6a,
-+			    0x59, 0x33, 0xef, 0x9b, 0x71, 0x90, 0x15, 0x49,
-+			    0x44, 0x72, 0x05, 0xaa, 0xe9, 0xda, 0x92, 0x8a,
-+			    0x6b, 0x91, 0xa3, 0x52, 0xba, 0x10, 0xf4, 0x1f },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02 },
-+		.valid = true
-+	},
-+	/* wycheproof - edge case for shared secret */
-+	{
-+		.private = { 0xa0, 0xa4, 0xf1, 0x30, 0xb9, 0x8a, 0x5b, 0xe4,
-+			     0xb1, 0xce, 0xdb, 0x7c, 0xb8, 0x55, 0x84, 0xa3,
-+			     0x52, 0x0e, 0x14, 0x2d, 0x47, 0x4d, 0xc9, 0xcc,
-+			     0xb9, 0x09, 0xa0, 0x73, 0xa9, 0x76, 0xbf, 0x63 },
-+		.public = { 0x30, 0x3b, 0x39, 0x2f, 0x15, 0x31, 0x16, 0xca,
-+			    0xd9, 0xcc, 0x68, 0x2a, 0x00, 0xcc, 0xc4, 0x4c,
-+			    0x95, 0xff, 0x0d, 0x3b, 0xbe, 0x56, 0x8b, 0xeb,
-+			    0x6c, 0x4e, 0x73, 0x9b, 0xaf, 0xdc, 0x2c, 0x68 },
-+		.result = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00 },
-+		.valid = true
-+	},
-+	/* wycheproof - checking for overflow */
-+	{
-+		.private = { 0xc8, 0x17, 0x24, 0x70, 0x40, 0x00, 0xb2, 0x6d,
-+			     0x31, 0x70, 0x3c, 0xc9, 0x7e, 0x3a, 0x37, 0x8d,
-+			     0x56, 0xfa, 0xd8, 0x21, 0x93, 0x61, 0xc8, 0x8c,
-+			     0xca, 0x8b, 0xd7, 0xc5, 0x71, 0x9b, 0x12, 0xb2 },
-+		.public = { 0xfd, 0x30, 0x0a, 0xeb, 0x40, 0xe1, 0xfa, 0x58,
-+			    0x25, 0x18, 0x41, 0x2b, 0x49, 0xb2, 0x08, 0xa7,
-+			    0x84, 0x2b, 0x1e, 0x1f, 0x05, 0x6a, 0x04, 0x01,
-+			    0x78, 0xea, 0x41, 0x41, 0x53, 0x4f, 0x65, 0x2d },
-+		.result = { 0xb7, 0x34, 0x10, 0x5d, 0xc2, 0x57, 0x58, 0x5d,
-+			    0x73, 0xb5, 0x66, 0xcc, 0xb7, 0x6f, 0x06, 0x27,
-+			    0x95, 0xcc, 0xbe, 0xc8, 0x91, 0x28, 0xe5, 0x2b,
-+			    0x02, 0xf3, 0xe5, 0x96, 0x39, 0xf1, 0x3c, 0x46 },
-+		.valid = true
-+	},
-+	/* wycheproof - checking for overflow */
-+	{
-+		.private = { 0xc8, 0x17, 0x24, 0x70, 0x40, 0x00, 0xb2, 0x6d,
-+			     0x31, 0x70, 0x3c, 0xc9, 0x7e, 0x3a, 0x37, 0x8d,
-+			     0x56, 0xfa, 0xd8, 0x21, 0x93, 0x61, 0xc8, 0x8c,
-+			     0xca, 0x8b, 0xd7, 0xc5, 0x71, 0x9b, 0x12, 0xb2 },
-+		.public = { 0xc8, 0xef, 0x79, 0xb5, 0x14, 0xd7, 0x68, 0x26,
-+			    0x77, 0xbc, 0x79, 0x31, 0xe0, 0x6e, 0xe5, 0xc2,
-+			    0x7c, 0x9b, 0x39, 0x2b, 0x4a, 0xe9, 0x48, 0x44,
-+			    0x73, 0xf5, 0x54, 0xe6, 0x67, 0x8e, 0xcc, 0x2e },
-+		.result = { 0x64, 0x7a, 0x46, 0xb6, 0xfc, 0x3f, 0x40, 0xd6,
-+			    0x21, 0x41, 0xee, 0x3c, 0xee, 0x70, 0x6b, 0x4d,
-+			    0x7a, 0x92, 0x71, 0x59, 0x3a, 0x7b, 0x14, 0x3e,
-+			    0x8e, 0x2e, 0x22, 0x79, 0x88, 0x3e, 0x45, 0x50 },
-+		.valid = true
-+	},
-+	/* wycheproof - checking for overflow */
-+	{
-+		.private = { 0xc8, 0x17, 0x24, 0x70, 0x40, 0x00, 0xb2, 0x6d,
-+			     0x31, 0x70, 0x3c, 0xc9, 0x7e, 0x3a, 0x37, 0x8d,
-+			     0x56, 0xfa, 0xd8, 0x21, 0x93, 0x61, 0xc8, 0x8c,
-+			     0xca, 0x8b, 0xd7, 0xc5, 0x71, 0x9b, 0x12, 0xb2 },
-+		.public = { 0x64, 0xae, 0xac, 0x25, 0x04, 0x14, 0x48, 0x61,
-+			    0x53, 0x2b, 0x7b, 0xbc, 0xb6, 0xc8, 0x7d, 0x67,
-+			    0xdd, 0x4c, 0x1f, 0x07, 0xeb, 0xc2, 0xe0, 0x6e,
-+			    0xff, 0xb9, 0x5a, 0xec, 0xc6, 0x17, 0x0b, 0x2c },
-+		.result = { 0x4f, 0xf0, 0x3d, 0x5f, 0xb4, 0x3c, 0xd8, 0x65,
-+			    0x7a, 0x3c, 0xf3, 0x7c, 0x13, 0x8c, 0xad, 0xce,
-+			    0xcc, 0xe5, 0x09, 0xe4, 0xeb, 0xa0, 0x89, 0xd0,
-+			    0xef, 0x40, 0xb4, 0xe4, 0xfb, 0x94, 0x61, 0x55 },
-+		.valid = true
-+	},
-+	/* wycheproof - checking for overflow */
-+	{
-+		.private = { 0xc8, 0x17, 0x24, 0x70, 0x40, 0x00, 0xb2, 0x6d,
-+			     0x31, 0x70, 0x3c, 0xc9, 0x7e, 0x3a, 0x37, 0x8d,
-+			     0x56, 0xfa, 0xd8, 0x21, 0x93, 0x61, 0xc8, 0x8c,
-+			     0xca, 0x8b, 0xd7, 0xc5, 0x71, 0x9b, 0x12, 0xb2 },
-+		.public = { 0xbf, 0x68, 0xe3, 0x5e, 0x9b, 0xdb, 0x7e, 0xee,
-+			    0x1b, 0x50, 0x57, 0x02, 0x21, 0x86, 0x0f, 0x5d,
-+			    0xcd, 0xad, 0x8a, 0xcb, 0xab, 0x03, 0x1b, 0x14,
-+			    0x97, 0x4c, 0xc4, 0x90, 0x13, 0xc4, 0x98, 0x31 },
-+		.result = { 0x21, 0xce, 0xe5, 0x2e, 0xfd, 0xbc, 0x81, 0x2e,
-+			    0x1d, 0x02, 0x1a, 0x4a, 0xf1, 0xe1, 0xd8, 0xbc,
-+			    0x4d, 0xb3, 0xc4, 0x00, 0xe4, 0xd2, 0xa2, 0xc5,
-+			    0x6a, 0x39, 0x26, 0xdb, 0x4d, 0x99, 0xc6, 0x5b },
-+		.valid = true
-+	},
-+	/* wycheproof - checking for overflow */
-+	{
-+		.private = { 0xc8, 0x17, 0x24, 0x70, 0x40, 0x00, 0xb2, 0x6d,
-+			     0x31, 0x70, 0x3c, 0xc9, 0x7e, 0x3a, 0x37, 0x8d,
-+			     0x56, 0xfa, 0xd8, 0x21, 0x93, 0x61, 0xc8, 0x8c,
-+			     0xca, 0x8b, 0xd7, 0xc5, 0x71, 0x9b, 0x12, 0xb2 },
-+		.public = { 0x53, 0x47, 0xc4, 0x91, 0x33, 0x1a, 0x64, 0xb4,
-+			    0x3d, 0xdc, 0x68, 0x30, 0x34, 0xe6, 0x77, 0xf5,
-+			    0x3d, 0xc3, 0x2b, 0x52, 0xa5, 0x2a, 0x57, 0x7c,
-+			    0x15, 0xa8, 0x3b, 0xf2, 0x98, 0xe9, 0x9f, 0x19 },
-+		.result = { 0x18, 0xcb, 0x89, 0xe4, 0xe2, 0x0c, 0x0c, 0x2b,
-+			    0xd3, 0x24, 0x30, 0x52, 0x45, 0x26, 0x6c, 0x93,
-+			    0x27, 0x69, 0x0b, 0xbe, 0x79, 0xac, 0xb8, 0x8f,
-+			    0x5b, 0x8f, 0xb3, 0xf7, 0x4e, 0xca, 0x3e, 0x52 },
-+		.valid = true
-+	},
-+	/* wycheproof - private key == -1 (mod order) */
-+	{
-+		.private = { 0xa0, 0x23, 0xcd, 0xd0, 0x83, 0xef, 0x5b, 0xb8,
-+			     0x2f, 0x10, 0xd6, 0x2e, 0x59, 0xe1, 0x5a, 0x68,
-+			     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50 },
-+		.public = { 0x25, 0x8e, 0x04, 0x52, 0x3b, 0x8d, 0x25, 0x3e,
-+			    0xe6, 0x57, 0x19, 0xfc, 0x69, 0x06, 0xc6, 0x57,
-+			    0x19, 0x2d, 0x80, 0x71, 0x7e, 0xdc, 0x82, 0x8f,
-+			    0xa0, 0xaf, 0x21, 0x68, 0x6e, 0x2f, 0xaa, 0x75 },
-+		.result = { 0x25, 0x8e, 0x04, 0x52, 0x3b, 0x8d, 0x25, 0x3e,
-+			    0xe6, 0x57, 0x19, 0xfc, 0x69, 0x06, 0xc6, 0x57,
-+			    0x19, 0x2d, 0x80, 0x71, 0x7e, 0xdc, 0x82, 0x8f,
-+			    0xa0, 0xaf, 0x21, 0x68, 0x6e, 0x2f, 0xaa, 0x75 },
-+		.valid = true
-+	},
-+	/* wycheproof - private key == 1 (mod order) on twist */
-+	{
-+		.private = { 0x58, 0x08, 0x3d, 0xd2, 0x61, 0xad, 0x91, 0xef,
-+			     0xf9, 0x52, 0x32, 0x2e, 0xc8, 0x24, 0xc6, 0x82,
-+			     0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+			     0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x5f },
-+		.public = { 0x2e, 0xae, 0x5e, 0xc3, 0xdd, 0x49, 0x4e, 0x9f,
-+			    0x2d, 0x37, 0xd2, 0x58, 0xf8, 0x73, 0xa8, 0xe6,
-+			    0xe9, 0xd0, 0xdb, 0xd1, 0xe3, 0x83, 0xef, 0x64,
-+			    0xd9, 0x8b, 0xb9, 0x1b, 0x3e, 0x0b, 0xe0, 0x35 },
-+		.result = { 0x2e, 0xae, 0x5e, 0xc3, 0xdd, 0x49, 0x4e, 0x9f,
-+			    0x2d, 0x37, 0xd2, 0x58, 0xf8, 0x73, 0xa8, 0xe6,
-+			    0xe9, 0xd0, 0xdb, 0xd1, 0xe3, 0x83, 0xef, 0x64,
-+			    0xd9, 0x8b, 0xb9, 0x1b, 0x3e, 0x0b, 0xe0, 0x35 },
-+		.valid = true
-+	}
-+};
-+
-+bool __init curve25519_selftest(void)
-+{
-+	bool success = true, ret, ret2;
-+	size_t i = 0, j;
-+	u8 in[CURVE25519_KEY_SIZE];
-+	u8 out[CURVE25519_KEY_SIZE], out2[CURVE25519_KEY_SIZE],
-+	   out3[CURVE25519_KEY_SIZE];
-+
-+	for (i = 0; i < ARRAY_SIZE(curve25519_test_vectors); ++i) {
-+		memset(out, 0, CURVE25519_KEY_SIZE);
-+		ret = curve25519(out, curve25519_test_vectors[i].private,
-+				 curve25519_test_vectors[i].public);
-+		if (ret != curve25519_test_vectors[i].valid ||
-+		    memcmp(out, curve25519_test_vectors[i].result,
-+			   CURVE25519_KEY_SIZE)) {
-+			pr_err("curve25519 self-test %zu: FAIL\n", i + 1);
-+			success = false;
-+		}
-+	}
-+
-+	for (i = 0; i < 5; ++i) {
-+		get_random_bytes(in, sizeof(in));
-+		ret = curve25519_generate_public(out, in);
-+		ret2 = curve25519(out2, in, (u8[CURVE25519_KEY_SIZE]){ 9 });
-+		curve25519_generic(out3, in, (u8[CURVE25519_KEY_SIZE]){ 9 });
-+		if (ret != ret2 ||
-+		    memcmp(out, out2, CURVE25519_KEY_SIZE) ||
-+		    memcmp(out, out3, CURVE25519_KEY_SIZE)) {
-+			pr_err("curve25519 basepoint self-test %zu: FAIL: input - 0x",
-+			       i + 1);
-+			for (j = CURVE25519_KEY_SIZE; j-- > 0;)
-+				printk(KERN_CONT "%02x", in[j]);
-+			printk(KERN_CONT "\n");
-+			success = false;
-+		}
-+	}
-+
-+	return success;
-+}
---- a/lib/crypto/curve25519.c
-+++ b/lib/crypto/curve25519.c
-@@ -13,6 +13,8 @@
- #include <linux/module.h>
- #include <linux/init.h>
- 
-+bool curve25519_selftest(void);
-+
- const u8 curve25519_null_point[CURVE25519_KEY_SIZE] __aligned(32) = { 0 };
- const u8 curve25519_base_point[CURVE25519_KEY_SIZE] __aligned(32) = { 9 };
- 
-@@ -20,6 +22,21 @@ EXPORT_SYMBOL(curve25519_null_point);
- EXPORT_SYMBOL(curve25519_base_point);
- EXPORT_SYMBOL(curve25519_generic);
- 
-+static int __init mod_init(void)
-+{
-+	if (!IS_ENABLED(CONFIG_CRYPTO_MANAGER_DISABLE_TESTS) &&
-+	    WARN_ON(!curve25519_selftest()))
-+		return -ENODEV;
-+	return 0;
-+}
-+
-+static void __exit mod_exit(void)
-+{
-+}
-+
-+module_init(mod_init);
-+module_exit(mod_exit);
-+
- MODULE_LICENSE("GPL v2");
- MODULE_DESCRIPTION("Curve25519 scalar multiplication");
- MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0041-crypto-poly1305-add-new-32-and-64-bit-generic-versio.patch b/target/linux/generic/backport-5.4/080-wireguard-0041-crypto-poly1305-add-new-32-and-64-bit-generic-versio.patch
deleted file mode 100644
index c41ef55b14..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0041-crypto-poly1305-add-new-32-and-64-bit-generic-versio.patch
+++ /dev/null
@@ -1,1164 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Sun, 5 Jan 2020 22:40:46 -0500
-Subject: [PATCH] crypto: poly1305 - add new 32 and 64-bit generic versions
-
-commit 1c08a104360f3e18f4ee6346c21cc3923efb952e upstream.
-
-These two C implementations from Zinc -- a 32x32 one and a 64x64 one,
-depending on the platform -- come from Andrew Moon's public domain
-poly1305-donna portable code, modified for usage in the kernel. The
-precomputation in the 32-bit version and the use of 64x64 multiplies in
-the 64-bit version make these perform better than the code it replaces.
-Moon's code is also very widespread and has received many eyeballs of
-scrutiny.
-
-There's a bit of interference between the x86 implementation, which
-relies on internal details of the old scalar implementation. In the next
-commit, the x86 implementation will be replaced with a faster one that
-doesn't rely on this, so none of this matters much. But for now, to keep
-this passing the tests, we inline the bits of the old implementation
-that the x86 implementation relied on. Also, since we now support a
-slightly larger key space, via the union, some offsets had to be fixed
-up.
-
-Nonce calculation was folded in with the emit function, to take
-advantage of 64x64 arithmetic. However, Adiantum appeared to rely on no
-nonce handling in emit, so this path was conditionalized. We also
-introduced a new struct, poly1305_core_key, to represent the precise
-amount of space that particular implementation uses.
-
-Testing with kbench9000, depending on the CPU, the update function for
-the 32x32 version has been improved by 4%-7%, and for the 64x64 by
-19%-30%. The 32x32 gains are small, but I think there's great value in
-having a parallel implementation to the 64x64 one so that the two can be
-compared side-by-side as nice stand-alone units.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/poly1305-avx2-x86_64.S |  20 +--
- arch/x86/crypto/poly1305_glue.c        | 215 +++++++++++++++++++++++--
- crypto/adiantum.c                      |   4 +-
- crypto/nhpoly1305.c                    |   2 +-
- crypto/poly1305_generic.c              |  25 ++-
- include/crypto/internal/poly1305.h     |  45 ++----
- include/crypto/nhpoly1305.h            |   4 +-
- include/crypto/poly1305.h              |  26 ++-
- lib/crypto/Makefile                    |   4 +-
- lib/crypto/poly1305-donna32.c          | 204 +++++++++++++++++++++++
- lib/crypto/poly1305-donna64.c          | 185 +++++++++++++++++++++
- lib/crypto/poly1305.c                  | 169 +------------------
- 12 files changed, 675 insertions(+), 228 deletions(-)
- create mode 100644 lib/crypto/poly1305-donna32.c
- create mode 100644 lib/crypto/poly1305-donna64.c
-
---- a/arch/x86/crypto/poly1305-avx2-x86_64.S
-+++ b/arch/x86/crypto/poly1305-avx2-x86_64.S
-@@ -34,16 +34,16 @@ ORMASK:	.octa 0x000000000100000000000000
- #define u2 0x08(%r8)
- #define u3 0x0c(%r8)
- #define u4 0x10(%r8)
--#define w0 0x14(%r8)
--#define w1 0x18(%r8)
--#define w2 0x1c(%r8)
--#define w3 0x20(%r8)
--#define w4 0x24(%r8)
--#define y0 0x28(%r8)
--#define y1 0x2c(%r8)
--#define y2 0x30(%r8)
--#define y3 0x34(%r8)
--#define y4 0x38(%r8)
-+#define w0 0x18(%r8)
-+#define w1 0x1c(%r8)
-+#define w2 0x20(%r8)
-+#define w3 0x24(%r8)
-+#define w4 0x28(%r8)
-+#define y0 0x30(%r8)
-+#define y1 0x34(%r8)
-+#define y2 0x38(%r8)
-+#define y3 0x3c(%r8)
-+#define y4 0x40(%r8)
- #define m %rsi
- #define hc0 %ymm0
- #define hc1 %ymm1
---- a/arch/x86/crypto/poly1305_glue.c
-+++ b/arch/x86/crypto/poly1305_glue.c
-@@ -25,6 +25,21 @@ asmlinkage void poly1305_4block_avx2(u32
- static __ro_after_init DEFINE_STATIC_KEY_FALSE(poly1305_use_simd);
- static __ro_after_init DEFINE_STATIC_KEY_FALSE(poly1305_use_avx2);
- 
-+static inline u64 mlt(u64 a, u64 b)
-+{
-+	return a * b;
-+}
-+
-+static inline u32 sr(u64 v, u_char n)
-+{
-+	return v >> n;
-+}
-+
-+static inline u32 and(u32 v, u32 mask)
-+{
-+	return v & mask;
-+}
-+
- static void poly1305_simd_mult(u32 *a, const u32 *b)
- {
- 	u8 m[POLY1305_BLOCK_SIZE];
-@@ -36,6 +51,168 @@ static void poly1305_simd_mult(u32 *a, c
- 	poly1305_block_sse2(a, m, b, 1);
- }
- 
-+static void poly1305_integer_setkey(struct poly1305_key *key, const u8 *raw_key)
-+{
-+	/* r &= 0xffffffc0ffffffc0ffffffc0fffffff */
-+	key->r[0] = (get_unaligned_le32(raw_key +  0) >> 0) & 0x3ffffff;
-+	key->r[1] = (get_unaligned_le32(raw_key +  3) >> 2) & 0x3ffff03;
-+	key->r[2] = (get_unaligned_le32(raw_key +  6) >> 4) & 0x3ffc0ff;
-+	key->r[3] = (get_unaligned_le32(raw_key +  9) >> 6) & 0x3f03fff;
-+	key->r[4] = (get_unaligned_le32(raw_key + 12) >> 8) & 0x00fffff;
-+}
-+
-+static void poly1305_integer_blocks(struct poly1305_state *state,
-+				    const struct poly1305_key *key,
-+				    const void *src,
-+				    unsigned int nblocks, u32 hibit)
-+{
-+	u32 r0, r1, r2, r3, r4;
-+	u32 s1, s2, s3, s4;
-+	u32 h0, h1, h2, h3, h4;
-+	u64 d0, d1, d2, d3, d4;
-+
-+	if (!nblocks)
-+		return;
-+
-+	r0 = key->r[0];
-+	r1 = key->r[1];
-+	r2 = key->r[2];
-+	r3 = key->r[3];
-+	r4 = key->r[4];
-+
-+	s1 = r1 * 5;
-+	s2 = r2 * 5;
-+	s3 = r3 * 5;
-+	s4 = r4 * 5;
-+
-+	h0 = state->h[0];
-+	h1 = state->h[1];
-+	h2 = state->h[2];
-+	h3 = state->h[3];
-+	h4 = state->h[4];
-+
-+	do {
-+		/* h += m[i] */
-+		h0 += (get_unaligned_le32(src +  0) >> 0) & 0x3ffffff;
-+		h1 += (get_unaligned_le32(src +  3) >> 2) & 0x3ffffff;
-+		h2 += (get_unaligned_le32(src +  6) >> 4) & 0x3ffffff;
-+		h3 += (get_unaligned_le32(src +  9) >> 6) & 0x3ffffff;
-+		h4 += (get_unaligned_le32(src + 12) >> 8) | (hibit << 24);
-+
-+		/* h *= r */
-+		d0 = mlt(h0, r0) + mlt(h1, s4) + mlt(h2, s3) +
-+		     mlt(h3, s2) + mlt(h4, s1);
-+		d1 = mlt(h0, r1) + mlt(h1, r0) + mlt(h2, s4) +
-+		     mlt(h3, s3) + mlt(h4, s2);
-+		d2 = mlt(h0, r2) + mlt(h1, r1) + mlt(h2, r0) +
-+		     mlt(h3, s4) + mlt(h4, s3);
-+		d3 = mlt(h0, r3) + mlt(h1, r2) + mlt(h2, r1) +
-+		     mlt(h3, r0) + mlt(h4, s4);
-+		d4 = mlt(h0, r4) + mlt(h1, r3) + mlt(h2, r2) +
-+		     mlt(h3, r1) + mlt(h4, r0);
-+
-+		/* (partial) h %= p */
-+		d1 += sr(d0, 26);     h0 = and(d0, 0x3ffffff);
-+		d2 += sr(d1, 26);     h1 = and(d1, 0x3ffffff);
-+		d3 += sr(d2, 26);     h2 = and(d2, 0x3ffffff);
-+		d4 += sr(d3, 26);     h3 = and(d3, 0x3ffffff);
-+		h0 += sr(d4, 26) * 5; h4 = and(d4, 0x3ffffff);
-+		h1 += h0 >> 26;       h0 = h0 & 0x3ffffff;
-+
-+		src += POLY1305_BLOCK_SIZE;
-+	} while (--nblocks);
-+
-+	state->h[0] = h0;
-+	state->h[1] = h1;
-+	state->h[2] = h2;
-+	state->h[3] = h3;
-+	state->h[4] = h4;
-+}
-+
-+static void poly1305_integer_emit(const struct poly1305_state *state, void *dst)
-+{
-+	u32 h0, h1, h2, h3, h4;
-+	u32 g0, g1, g2, g3, g4;
-+	u32 mask;
-+
-+	/* fully carry h */
-+	h0 = state->h[0];
-+	h1 = state->h[1];
-+	h2 = state->h[2];
-+	h3 = state->h[3];
-+	h4 = state->h[4];
-+
-+	h2 += (h1 >> 26);     h1 = h1 & 0x3ffffff;
-+	h3 += (h2 >> 26);     h2 = h2 & 0x3ffffff;
-+	h4 += (h3 >> 26);     h3 = h3 & 0x3ffffff;
-+	h0 += (h4 >> 26) * 5; h4 = h4 & 0x3ffffff;
-+	h1 += (h0 >> 26);     h0 = h0 & 0x3ffffff;
-+
-+	/* compute h + -p */
-+	g0 = h0 + 5;
-+	g1 = h1 + (g0 >> 26);             g0 &= 0x3ffffff;
-+	g2 = h2 + (g1 >> 26);             g1 &= 0x3ffffff;
-+	g3 = h3 + (g2 >> 26);             g2 &= 0x3ffffff;
-+	g4 = h4 + (g3 >> 26) - (1 << 26); g3 &= 0x3ffffff;
-+
-+	/* select h if h < p, or h + -p if h >= p */
-+	mask = (g4 >> ((sizeof(u32) * 8) - 1)) - 1;
-+	g0 &= mask;
-+	g1 &= mask;
-+	g2 &= mask;
-+	g3 &= mask;
-+	g4 &= mask;
-+	mask = ~mask;
-+	h0 = (h0 & mask) | g0;
-+	h1 = (h1 & mask) | g1;
-+	h2 = (h2 & mask) | g2;
-+	h3 = (h3 & mask) | g3;
-+	h4 = (h4 & mask) | g4;
-+
-+	/* h = h % (2^128) */
-+	put_unaligned_le32((h0 >>  0) | (h1 << 26), dst +  0);
-+	put_unaligned_le32((h1 >>  6) | (h2 << 20), dst +  4);
-+	put_unaligned_le32((h2 >> 12) | (h3 << 14), dst +  8);
-+	put_unaligned_le32((h3 >> 18) | (h4 <<  8), dst + 12);
-+}
-+
-+void poly1305_init_arch(struct poly1305_desc_ctx *desc, const u8 *key)
-+{
-+	poly1305_integer_setkey(desc->opaque_r, key);
-+	desc->s[0] = get_unaligned_le32(key + 16);
-+	desc->s[1] = get_unaligned_le32(key + 20);
-+	desc->s[2] = get_unaligned_le32(key + 24);
-+	desc->s[3] = get_unaligned_le32(key + 28);
-+	poly1305_core_init(&desc->h);
-+	desc->buflen = 0;
-+	desc->sset = true;
-+	desc->rset = 1;
-+}
-+EXPORT_SYMBOL_GPL(poly1305_init_arch);
-+
-+static unsigned int crypto_poly1305_setdesckey(struct poly1305_desc_ctx *dctx,
-+					       const u8 *src, unsigned int srclen)
-+{
-+	if (!dctx->sset) {
-+		if (!dctx->rset && srclen >= POLY1305_BLOCK_SIZE) {
-+			poly1305_integer_setkey(dctx->r, src);
-+			src += POLY1305_BLOCK_SIZE;
-+			srclen -= POLY1305_BLOCK_SIZE;
-+			dctx->rset = 1;
-+		}
-+		if (srclen >= POLY1305_BLOCK_SIZE) {
-+			dctx->s[0] = get_unaligned_le32(src +  0);
-+			dctx->s[1] = get_unaligned_le32(src +  4);
-+			dctx->s[2] = get_unaligned_le32(src +  8);
-+			dctx->s[3] = get_unaligned_le32(src + 12);
-+			src += POLY1305_BLOCK_SIZE;
-+			srclen -= POLY1305_BLOCK_SIZE;
-+			dctx->sset = true;
-+		}
-+	}
-+	return srclen;
-+}
-+
- static unsigned int poly1305_scalar_blocks(struct poly1305_desc_ctx *dctx,
- 					   const u8 *src, unsigned int srclen)
- {
-@@ -47,8 +224,8 @@ static unsigned int poly1305_scalar_bloc
- 		srclen = datalen;
- 	}
- 	if (srclen >= POLY1305_BLOCK_SIZE) {
--		poly1305_core_blocks(&dctx->h, dctx->r, src,
--				     srclen / POLY1305_BLOCK_SIZE, 1);
-+		poly1305_integer_blocks(&dctx->h, dctx->opaque_r, src,
-+					srclen / POLY1305_BLOCK_SIZE, 1);
- 		srclen %= POLY1305_BLOCK_SIZE;
- 	}
- 	return srclen;
-@@ -105,12 +282,6 @@ static unsigned int poly1305_simd_blocks
- 	return srclen;
- }
- 
--void poly1305_init_arch(struct poly1305_desc_ctx *desc, const u8 *key)
--{
--	poly1305_init_generic(desc, key);
--}
--EXPORT_SYMBOL(poly1305_init_arch);
--
- void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src,
- 			  unsigned int srclen)
- {
-@@ -158,9 +329,31 @@ void poly1305_update_arch(struct poly130
- }
- EXPORT_SYMBOL(poly1305_update_arch);
- 
--void poly1305_final_arch(struct poly1305_desc_ctx *desc, u8 *digest)
-+void poly1305_final_arch(struct poly1305_desc_ctx *desc, u8 *dst)
- {
--	poly1305_final_generic(desc, digest);
-+	__le32 digest[4];
-+	u64 f = 0;
-+
-+	if (unlikely(desc->buflen)) {
-+		desc->buf[desc->buflen++] = 1;
-+		memset(desc->buf + desc->buflen, 0,
-+		       POLY1305_BLOCK_SIZE - desc->buflen);
-+		poly1305_integer_blocks(&desc->h, desc->opaque_r, desc->buf, 1, 0);
-+	}
-+
-+	poly1305_integer_emit(&desc->h, digest);
-+
-+	/* mac = (h + s) % (2^128) */
-+	f = (f >> 32) + le32_to_cpu(digest[0]) + desc->s[0];
-+	put_unaligned_le32(f, dst + 0);
-+	f = (f >> 32) + le32_to_cpu(digest[1]) + desc->s[1];
-+	put_unaligned_le32(f, dst + 4);
-+	f = (f >> 32) + le32_to_cpu(digest[2]) + desc->s[2];
-+	put_unaligned_le32(f, dst + 8);
-+	f = (f >> 32) + le32_to_cpu(digest[3]) + desc->s[3];
-+	put_unaligned_le32(f, dst + 12);
-+
-+	*desc = (struct poly1305_desc_ctx){};
- }
- EXPORT_SYMBOL(poly1305_final_arch);
- 
-@@ -183,7 +376,7 @@ static int crypto_poly1305_final(struct
- 	if (unlikely(!dctx->sset))
- 		return -ENOKEY;
- 
--	poly1305_final_generic(dctx, dst);
-+	poly1305_final_arch(dctx, dst);
- 	return 0;
- }
- 
---- a/crypto/adiantum.c
-+++ b/crypto/adiantum.c
-@@ -72,7 +72,7 @@ struct adiantum_tfm_ctx {
- 	struct crypto_skcipher *streamcipher;
- 	struct crypto_cipher *blockcipher;
- 	struct crypto_shash *hash;
--	struct poly1305_key header_hash_key;
-+	struct poly1305_core_key header_hash_key;
- };
- 
- struct adiantum_request_ctx {
-@@ -249,7 +249,7 @@ static void adiantum_hash_header(struct
- 	poly1305_core_blocks(&state, &tctx->header_hash_key, req->iv,
- 			     TWEAK_SIZE / POLY1305_BLOCK_SIZE, 1);
- 
--	poly1305_core_emit(&state, &rctx->header_hash);
-+	poly1305_core_emit(&state, NULL, &rctx->header_hash);
- }
- 
- /* Hash the left-hand part (the "bulk") of the message using NHPoly1305 */
---- a/crypto/nhpoly1305.c
-+++ b/crypto/nhpoly1305.c
-@@ -210,7 +210,7 @@ int crypto_nhpoly1305_final_helper(struc
- 	if (state->nh_remaining)
- 		process_nh_hash_value(state, key);
- 
--	poly1305_core_emit(&state->poly_state, dst);
-+	poly1305_core_emit(&state->poly_state, NULL, dst);
- 	return 0;
- }
- EXPORT_SYMBOL(crypto_nhpoly1305_final_helper);
---- a/crypto/poly1305_generic.c
-+++ b/crypto/poly1305_generic.c
-@@ -31,6 +31,29 @@ static int crypto_poly1305_init(struct s
- 	return 0;
- }
- 
-+static unsigned int crypto_poly1305_setdesckey(struct poly1305_desc_ctx *dctx,
-+					       const u8 *src, unsigned int srclen)
-+{
-+	if (!dctx->sset) {
-+		if (!dctx->rset && srclen >= POLY1305_BLOCK_SIZE) {
-+			poly1305_core_setkey(&dctx->core_r, src);
-+			src += POLY1305_BLOCK_SIZE;
-+			srclen -= POLY1305_BLOCK_SIZE;
-+			dctx->rset = 2;
-+		}
-+		if (srclen >= POLY1305_BLOCK_SIZE) {
-+			dctx->s[0] = get_unaligned_le32(src +  0);
-+			dctx->s[1] = get_unaligned_le32(src +  4);
-+			dctx->s[2] = get_unaligned_le32(src +  8);
-+			dctx->s[3] = get_unaligned_le32(src + 12);
-+			src += POLY1305_BLOCK_SIZE;
-+			srclen -= POLY1305_BLOCK_SIZE;
-+			dctx->sset = true;
-+		}
-+	}
-+	return srclen;
-+}
-+
- static void poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
- 			    unsigned int srclen)
- {
-@@ -42,7 +65,7 @@ static void poly1305_blocks(struct poly1
- 		srclen = datalen;
- 	}
- 
--	poly1305_core_blocks(&dctx->h, dctx->r, src,
-+	poly1305_core_blocks(&dctx->h, &dctx->core_r, src,
- 			     srclen / POLY1305_BLOCK_SIZE, 1);
- }
- 
---- a/include/crypto/internal/poly1305.h
-+++ b/include/crypto/internal/poly1305.h
-@@ -11,48 +11,23 @@
- #include <crypto/poly1305.h>
- 
- /*
-- * Poly1305 core functions.  These implement the ε-almost-∆-universal hash
-- * function underlying the Poly1305 MAC, i.e. they don't add an encrypted nonce
-- * ("s key") at the end.  They also only support block-aligned inputs.
-+ * Poly1305 core functions.  These only accept whole blocks; the caller must
-+ * handle any needed block buffering and padding.  'hibit' must be 1 for any
-+ * full blocks, or 0 for the final block if it had to be padded.  If 'nonce' is
-+ * non-NULL, then it's added at the end to compute the Poly1305 MAC.  Otherwise,
-+ * only the ε-almost-∆-universal hash function (not the full MAC) is computed.
-  */
--void poly1305_core_setkey(struct poly1305_key *key, const u8 *raw_key);
-+
-+void poly1305_core_setkey(struct poly1305_core_key *key, const u8 *raw_key);
- static inline void poly1305_core_init(struct poly1305_state *state)
- {
- 	*state = (struct poly1305_state){};
- }
- 
- void poly1305_core_blocks(struct poly1305_state *state,
--			  const struct poly1305_key *key, const void *src,
-+			  const struct poly1305_core_key *key, const void *src,
- 			  unsigned int nblocks, u32 hibit);
--void poly1305_core_emit(const struct poly1305_state *state, void *dst);
--
--/*
-- * Poly1305 requires a unique key for each tag, which implies that we can't set
-- * it on the tfm that gets accessed by multiple users simultaneously. Instead we
-- * expect the key as the first 32 bytes in the update() call.
-- */
--static inline
--unsigned int crypto_poly1305_setdesckey(struct poly1305_desc_ctx *dctx,
--					const u8 *src, unsigned int srclen)
--{
--	if (!dctx->sset) {
--		if (!dctx->rset && srclen >= POLY1305_BLOCK_SIZE) {
--			poly1305_core_setkey(dctx->r, src);
--			src += POLY1305_BLOCK_SIZE;
--			srclen -= POLY1305_BLOCK_SIZE;
--			dctx->rset = 1;
--		}
--		if (srclen >= POLY1305_BLOCK_SIZE) {
--			dctx->s[0] = get_unaligned_le32(src +  0);
--			dctx->s[1] = get_unaligned_le32(src +  4);
--			dctx->s[2] = get_unaligned_le32(src +  8);
--			dctx->s[3] = get_unaligned_le32(src + 12);
--			src += POLY1305_BLOCK_SIZE;
--			srclen -= POLY1305_BLOCK_SIZE;
--			dctx->sset = true;
--		}
--	}
--	return srclen;
--}
-+void poly1305_core_emit(const struct poly1305_state *state, const u32 nonce[4],
-+			void *dst);
- 
- #endif
---- a/include/crypto/nhpoly1305.h
-+++ b/include/crypto/nhpoly1305.h
-@@ -7,7 +7,7 @@
- #define _NHPOLY1305_H
- 
- #include <crypto/hash.h>
--#include <crypto/poly1305.h>
-+#include <crypto/internal/poly1305.h>
- 
- /* NH parameterization: */
- 
-@@ -33,7 +33,7 @@
- #define NHPOLY1305_KEY_SIZE	(POLY1305_BLOCK_SIZE + NH_KEY_BYTES)
- 
- struct nhpoly1305_key {
--	struct poly1305_key poly_key;
-+	struct poly1305_core_key poly_key;
- 	u32 nh_key[NH_KEY_WORDS];
- };
- 
---- a/include/crypto/poly1305.h
-+++ b/include/crypto/poly1305.h
-@@ -13,12 +13,29 @@
- #define POLY1305_KEY_SIZE	32
- #define POLY1305_DIGEST_SIZE	16
- 
-+/* The poly1305_key and poly1305_state types are mostly opaque and
-+ * implementation-defined. Limbs might be in base 2^64 or base 2^26, or
-+ * different yet. The union type provided keeps these 64-bit aligned for the
-+ * case in which this is implemented using 64x64 multiplies.
-+ */
-+
- struct poly1305_key {
--	u32 r[5];	/* key, base 2^26 */
-+	union {
-+		u32 r[5];
-+		u64 r64[3];
-+	};
-+};
-+
-+struct poly1305_core_key {
-+	struct poly1305_key key;
-+	struct poly1305_key precomputed_s;
- };
- 
- struct poly1305_state {
--	u32 h[5];	/* accumulator, base 2^26 */
-+	union {
-+		u32 h[5];
-+		u64 h64[3];
-+	};
- };
- 
- struct poly1305_desc_ctx {
-@@ -35,7 +52,10 @@ struct poly1305_desc_ctx {
- 	/* accumulator */
- 	struct poly1305_state h;
- 	/* key */
--	struct poly1305_key r[CONFIG_CRYPTO_LIB_POLY1305_RSIZE];
-+	union {
-+		struct poly1305_key opaque_r[CONFIG_CRYPTO_LIB_POLY1305_RSIZE];
-+		struct poly1305_core_key core_r;
-+	};
- };
- 
- void poly1305_init_arch(struct poly1305_desc_ctx *desc, const u8 *key);
---- a/lib/crypto/Makefile
-+++ b/lib/crypto/Makefile
-@@ -28,7 +28,9 @@ obj-$(CONFIG_CRYPTO_LIB_DES)			+= libdes
- libdes-y					:= des.o
- 
- obj-$(CONFIG_CRYPTO_LIB_POLY1305_GENERIC)	+= libpoly1305.o
--libpoly1305-y					:= poly1305.o
-+libpoly1305-y					:= poly1305-donna32.o
-+libpoly1305-$(CONFIG_ARCH_SUPPORTS_INT128)	:= poly1305-donna64.o
-+libpoly1305-y					+= poly1305.o
- 
- obj-$(CONFIG_CRYPTO_LIB_SHA256)			+= libsha256.o
- libsha256-y					:= sha256.o
---- /dev/null
-+++ b/lib/crypto/poly1305-donna32.c
-@@ -0,0 +1,204 @@
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ *
-+ * This is based in part on Andrew Moon's poly1305-donna, which is in the
-+ * public domain.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <asm/unaligned.h>
-+#include <crypto/internal/poly1305.h>
-+
-+void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
-+{
-+	/* r &= 0xffffffc0ffffffc0ffffffc0fffffff */
-+	key->key.r[0] = (get_unaligned_le32(&raw_key[0])) & 0x3ffffff;
-+	key->key.r[1] = (get_unaligned_le32(&raw_key[3]) >> 2) & 0x3ffff03;
-+	key->key.r[2] = (get_unaligned_le32(&raw_key[6]) >> 4) & 0x3ffc0ff;
-+	key->key.r[3] = (get_unaligned_le32(&raw_key[9]) >> 6) & 0x3f03fff;
-+	key->key.r[4] = (get_unaligned_le32(&raw_key[12]) >> 8) & 0x00fffff;
-+
-+	/* s = 5*r */
-+	key->precomputed_s.r[0] = key->key.r[1] * 5;
-+	key->precomputed_s.r[1] = key->key.r[2] * 5;
-+	key->precomputed_s.r[2] = key->key.r[3] * 5;
-+	key->precomputed_s.r[3] = key->key.r[4] * 5;
-+}
-+EXPORT_SYMBOL(poly1305_core_setkey);
-+
-+void poly1305_core_blocks(struct poly1305_state *state,
-+			  const struct poly1305_core_key *key, const void *src,
-+			  unsigned int nblocks, u32 hibit)
-+{
-+	const u8 *input = src;
-+	u32 r0, r1, r2, r3, r4;
-+	u32 s1, s2, s3, s4;
-+	u32 h0, h1, h2, h3, h4;
-+	u64 d0, d1, d2, d3, d4;
-+	u32 c;
-+
-+	if (!nblocks)
-+		return;
-+
-+	hibit <<= 24;
-+
-+	r0 = key->key.r[0];
-+	r1 = key->key.r[1];
-+	r2 = key->key.r[2];
-+	r3 = key->key.r[3];
-+	r4 = key->key.r[4];
-+
-+	s1 = key->precomputed_s.r[0];
-+	s2 = key->precomputed_s.r[1];
-+	s3 = key->precomputed_s.r[2];
-+	s4 = key->precomputed_s.r[3];
-+
-+	h0 = state->h[0];
-+	h1 = state->h[1];
-+	h2 = state->h[2];
-+	h3 = state->h[3];
-+	h4 = state->h[4];
-+
-+	do {
-+		/* h += m[i] */
-+		h0 += (get_unaligned_le32(&input[0])) & 0x3ffffff;
-+		h1 += (get_unaligned_le32(&input[3]) >> 2) & 0x3ffffff;
-+		h2 += (get_unaligned_le32(&input[6]) >> 4) & 0x3ffffff;
-+		h3 += (get_unaligned_le32(&input[9]) >> 6) & 0x3ffffff;
-+		h4 += (get_unaligned_le32(&input[12]) >> 8) | hibit;
-+
-+		/* h *= r */
-+		d0 = ((u64)h0 * r0) + ((u64)h1 * s4) +
-+		     ((u64)h2 * s3) + ((u64)h3 * s2) +
-+		     ((u64)h4 * s1);
-+		d1 = ((u64)h0 * r1) + ((u64)h1 * r0) +
-+		     ((u64)h2 * s4) + ((u64)h3 * s3) +
-+		     ((u64)h4 * s2);
-+		d2 = ((u64)h0 * r2) + ((u64)h1 * r1) +
-+		     ((u64)h2 * r0) + ((u64)h3 * s4) +
-+		     ((u64)h4 * s3);
-+		d3 = ((u64)h0 * r3) + ((u64)h1 * r2) +
-+		     ((u64)h2 * r1) + ((u64)h3 * r0) +
-+		     ((u64)h4 * s4);
-+		d4 = ((u64)h0 * r4) + ((u64)h1 * r3) +
-+		     ((u64)h2 * r2) + ((u64)h3 * r1) +
-+		     ((u64)h4 * r0);
-+
-+		/* (partial) h %= p */
-+		c = (u32)(d0 >> 26);
-+		h0 = (u32)d0 & 0x3ffffff;
-+		d1 += c;
-+		c = (u32)(d1 >> 26);
-+		h1 = (u32)d1 & 0x3ffffff;
-+		d2 += c;
-+		c = (u32)(d2 >> 26);
-+		h2 = (u32)d2 & 0x3ffffff;
-+		d3 += c;
-+		c = (u32)(d3 >> 26);
-+		h3 = (u32)d3 & 0x3ffffff;
-+		d4 += c;
-+		c = (u32)(d4 >> 26);
-+		h4 = (u32)d4 & 0x3ffffff;
-+		h0 += c * 5;
-+		c = (h0 >> 26);
-+		h0 = h0 & 0x3ffffff;
-+		h1 += c;
-+
-+		input += POLY1305_BLOCK_SIZE;
-+	} while (--nblocks);
-+
-+	state->h[0] = h0;
-+	state->h[1] = h1;
-+	state->h[2] = h2;
-+	state->h[3] = h3;
-+	state->h[4] = h4;
-+}
-+EXPORT_SYMBOL(poly1305_core_blocks);
-+
-+void poly1305_core_emit(const struct poly1305_state *state, const u32 nonce[4],
-+			void *dst)
-+{
-+	u8 *mac = dst;
-+	u32 h0, h1, h2, h3, h4, c;
-+	u32 g0, g1, g2, g3, g4;
-+	u64 f;
-+	u32 mask;
-+
-+	/* fully carry h */
-+	h0 = state->h[0];
-+	h1 = state->h[1];
-+	h2 = state->h[2];
-+	h3 = state->h[3];
-+	h4 = state->h[4];
-+
-+	c = h1 >> 26;
-+	h1 = h1 & 0x3ffffff;
-+	h2 += c;
-+	c = h2 >> 26;
-+	h2 = h2 & 0x3ffffff;
-+	h3 += c;
-+	c = h3 >> 26;
-+	h3 = h3 & 0x3ffffff;
-+	h4 += c;
-+	c = h4 >> 26;
-+	h4 = h4 & 0x3ffffff;
-+	h0 += c * 5;
-+	c = h0 >> 26;
-+	h0 = h0 & 0x3ffffff;
-+	h1 += c;
-+
-+	/* compute h + -p */
-+	g0 = h0 + 5;
-+	c = g0 >> 26;
-+	g0 &= 0x3ffffff;
-+	g1 = h1 + c;
-+	c = g1 >> 26;
-+	g1 &= 0x3ffffff;
-+	g2 = h2 + c;
-+	c = g2 >> 26;
-+	g2 &= 0x3ffffff;
-+	g3 = h3 + c;
-+	c = g3 >> 26;
-+	g3 &= 0x3ffffff;
-+	g4 = h4 + c - (1UL << 26);
-+
-+	/* select h if h < p, or h + -p if h >= p */
-+	mask = (g4 >> ((sizeof(u32) * 8) - 1)) - 1;
-+	g0 &= mask;
-+	g1 &= mask;
-+	g2 &= mask;
-+	g3 &= mask;
-+	g4 &= mask;
-+	mask = ~mask;
-+
-+	h0 = (h0 & mask) | g0;
-+	h1 = (h1 & mask) | g1;
-+	h2 = (h2 & mask) | g2;
-+	h3 = (h3 & mask) | g3;
-+	h4 = (h4 & mask) | g4;
-+
-+	/* h = h % (2^128) */
-+	h0 = ((h0) | (h1 << 26)) & 0xffffffff;
-+	h1 = ((h1 >> 6) | (h2 << 20)) & 0xffffffff;
-+	h2 = ((h2 >> 12) | (h3 << 14)) & 0xffffffff;
-+	h3 = ((h3 >> 18) | (h4 << 8)) & 0xffffffff;
-+
-+	if (likely(nonce)) {
-+		/* mac = (h + nonce) % (2^128) */
-+		f = (u64)h0 + nonce[0];
-+		h0 = (u32)f;
-+		f = (u64)h1 + nonce[1] + (f >> 32);
-+		h1 = (u32)f;
-+		f = (u64)h2 + nonce[2] + (f >> 32);
-+		h2 = (u32)f;
-+		f = (u64)h3 + nonce[3] + (f >> 32);
-+		h3 = (u32)f;
-+	}
-+
-+	put_unaligned_le32(h0, &mac[0]);
-+	put_unaligned_le32(h1, &mac[4]);
-+	put_unaligned_le32(h2, &mac[8]);
-+	put_unaligned_le32(h3, &mac[12]);
-+}
-+EXPORT_SYMBOL(poly1305_core_emit);
---- /dev/null
-+++ b/lib/crypto/poly1305-donna64.c
-@@ -0,0 +1,185 @@
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ *
-+ * This is based in part on Andrew Moon's poly1305-donna, which is in the
-+ * public domain.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <asm/unaligned.h>
-+#include <crypto/internal/poly1305.h>
-+
-+typedef __uint128_t u128;
-+
-+void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
-+{
-+	u64 t0, t1;
-+
-+	/* r &= 0xffffffc0ffffffc0ffffffc0fffffff */
-+	t0 = get_unaligned_le64(&raw_key[0]);
-+	t1 = get_unaligned_le64(&raw_key[8]);
-+
-+	key->key.r64[0] = t0 & 0xffc0fffffffULL;
-+	key->key.r64[1] = ((t0 >> 44) | (t1 << 20)) & 0xfffffc0ffffULL;
-+	key->key.r64[2] = ((t1 >> 24)) & 0x00ffffffc0fULL;
-+
-+	/* s = 20*r */
-+	key->precomputed_s.r64[0] = key->key.r64[1] * 20;
-+	key->precomputed_s.r64[1] = key->key.r64[2] * 20;
-+}
-+EXPORT_SYMBOL(poly1305_core_setkey);
-+
-+void poly1305_core_blocks(struct poly1305_state *state,
-+			  const struct poly1305_core_key *key, const void *src,
-+			  unsigned int nblocks, u32 hibit)
-+{
-+	const u8 *input = src;
-+	u64 hibit64;
-+	u64 r0, r1, r2;
-+	u64 s1, s2;
-+	u64 h0, h1, h2;
-+	u64 c;
-+	u128 d0, d1, d2, d;
-+
-+	if (!nblocks)
-+		return;
-+
-+	hibit64 = ((u64)hibit) << 40;
-+
-+	r0 = key->key.r64[0];
-+	r1 = key->key.r64[1];
-+	r2 = key->key.r64[2];
-+
-+	h0 = state->h64[0];
-+	h1 = state->h64[1];
-+	h2 = state->h64[2];
-+
-+	s1 = key->precomputed_s.r64[0];
-+	s2 = key->precomputed_s.r64[1];
-+
-+	do {
-+		u64 t0, t1;
-+
-+		/* h += m[i] */
-+		t0 = get_unaligned_le64(&input[0]);
-+		t1 = get_unaligned_le64(&input[8]);
-+
-+		h0 += t0 & 0xfffffffffffULL;
-+		h1 += ((t0 >> 44) | (t1 << 20)) & 0xfffffffffffULL;
-+		h2 += (((t1 >> 24)) & 0x3ffffffffffULL) | hibit64;
-+
-+		/* h *= r */
-+		d0 = (u128)h0 * r0;
-+		d = (u128)h1 * s2;
-+		d0 += d;
-+		d = (u128)h2 * s1;
-+		d0 += d;
-+		d1 = (u128)h0 * r1;
-+		d = (u128)h1 * r0;
-+		d1 += d;
-+		d = (u128)h2 * s2;
-+		d1 += d;
-+		d2 = (u128)h0 * r2;
-+		d = (u128)h1 * r1;
-+		d2 += d;
-+		d = (u128)h2 * r0;
-+		d2 += d;
-+
-+		/* (partial) h %= p */
-+		c = (u64)(d0 >> 44);
-+		h0 = (u64)d0 & 0xfffffffffffULL;
-+		d1 += c;
-+		c = (u64)(d1 >> 44);
-+		h1 = (u64)d1 & 0xfffffffffffULL;
-+		d2 += c;
-+		c = (u64)(d2 >> 42);
-+		h2 = (u64)d2 & 0x3ffffffffffULL;
-+		h0 += c * 5;
-+		c = h0 >> 44;
-+		h0 = h0 & 0xfffffffffffULL;
-+		h1 += c;
-+
-+		input += POLY1305_BLOCK_SIZE;
-+	} while (--nblocks);
-+
-+	state->h64[0] = h0;
-+	state->h64[1] = h1;
-+	state->h64[2] = h2;
-+}
-+EXPORT_SYMBOL(poly1305_core_blocks);
-+
-+void poly1305_core_emit(const struct poly1305_state *state, const u32 nonce[4],
-+			void *dst)
-+{
-+	u8 *mac = dst;
-+	u64 h0, h1, h2, c;
-+	u64 g0, g1, g2;
-+	u64 t0, t1;
-+
-+	/* fully carry h */
-+	h0 = state->h64[0];
-+	h1 = state->h64[1];
-+	h2 = state->h64[2];
-+
-+	c = h1 >> 44;
-+	h1 &= 0xfffffffffffULL;
-+	h2 += c;
-+	c = h2 >> 42;
-+	h2 &= 0x3ffffffffffULL;
-+	h0 += c * 5;
-+	c = h0 >> 44;
-+	h0 &= 0xfffffffffffULL;
-+	h1 += c;
-+	c = h1 >> 44;
-+	h1 &= 0xfffffffffffULL;
-+	h2 += c;
-+	c = h2 >> 42;
-+	h2 &= 0x3ffffffffffULL;
-+	h0 += c * 5;
-+	c = h0 >> 44;
-+	h0 &= 0xfffffffffffULL;
-+	h1 += c;
-+
-+	/* compute h + -p */
-+	g0 = h0 + 5;
-+	c  = g0 >> 44;
-+	g0 &= 0xfffffffffffULL;
-+	g1 = h1 + c;
-+	c  = g1 >> 44;
-+	g1 &= 0xfffffffffffULL;
-+	g2 = h2 + c - (1ULL << 42);
-+
-+	/* select h if h < p, or h + -p if h >= p */
-+	c = (g2 >> ((sizeof(u64) * 8) - 1)) - 1;
-+	g0 &= c;
-+	g1 &= c;
-+	g2 &= c;
-+	c  = ~c;
-+	h0 = (h0 & c) | g0;
-+	h1 = (h1 & c) | g1;
-+	h2 = (h2 & c) | g2;
-+
-+	if (likely(nonce)) {
-+		/* h = (h + nonce) */
-+		t0 = ((u64)nonce[1] << 32) | nonce[0];
-+		t1 = ((u64)nonce[3] << 32) | nonce[2];
-+
-+		h0 += t0 & 0xfffffffffffULL;
-+		c = h0 >> 44;
-+		h0 &= 0xfffffffffffULL;
-+		h1 += (((t0 >> 44) | (t1 << 20)) & 0xfffffffffffULL) + c;
-+		c = h1 >> 44;
-+		h1 &= 0xfffffffffffULL;
-+		h2 += (((t1 >> 24)) & 0x3ffffffffffULL) + c;
-+		h2 &= 0x3ffffffffffULL;
-+	}
-+
-+	/* mac = h % (2^128) */
-+	h0 = h0 | (h1 << 44);
-+	h1 = (h1 >> 20) | (h2 << 24);
-+
-+	put_unaligned_le64(h0, &mac[0]);
-+	put_unaligned_le64(h1, &mac[8]);
-+}
-+EXPORT_SYMBOL(poly1305_core_emit);
---- a/lib/crypto/poly1305.c
-+++ b/lib/crypto/poly1305.c
-@@ -12,151 +12,9 @@
- #include <linux/module.h>
- #include <asm/unaligned.h>
- 
--static inline u64 mlt(u64 a, u64 b)
--{
--	return a * b;
--}
--
--static inline u32 sr(u64 v, u_char n)
--{
--	return v >> n;
--}
--
--static inline u32 and(u32 v, u32 mask)
--{
--	return v & mask;
--}
--
--void poly1305_core_setkey(struct poly1305_key *key, const u8 *raw_key)
--{
--	/* r &= 0xffffffc0ffffffc0ffffffc0fffffff */
--	key->r[0] = (get_unaligned_le32(raw_key +  0) >> 0) & 0x3ffffff;
--	key->r[1] = (get_unaligned_le32(raw_key +  3) >> 2) & 0x3ffff03;
--	key->r[2] = (get_unaligned_le32(raw_key +  6) >> 4) & 0x3ffc0ff;
--	key->r[3] = (get_unaligned_le32(raw_key +  9) >> 6) & 0x3f03fff;
--	key->r[4] = (get_unaligned_le32(raw_key + 12) >> 8) & 0x00fffff;
--}
--EXPORT_SYMBOL_GPL(poly1305_core_setkey);
--
--void poly1305_core_blocks(struct poly1305_state *state,
--			  const struct poly1305_key *key, const void *src,
--			  unsigned int nblocks, u32 hibit)
--{
--	u32 r0, r1, r2, r3, r4;
--	u32 s1, s2, s3, s4;
--	u32 h0, h1, h2, h3, h4;
--	u64 d0, d1, d2, d3, d4;
--
--	if (!nblocks)
--		return;
--
--	r0 = key->r[0];
--	r1 = key->r[1];
--	r2 = key->r[2];
--	r3 = key->r[3];
--	r4 = key->r[4];
--
--	s1 = r1 * 5;
--	s2 = r2 * 5;
--	s3 = r3 * 5;
--	s4 = r4 * 5;
--
--	h0 = state->h[0];
--	h1 = state->h[1];
--	h2 = state->h[2];
--	h3 = state->h[3];
--	h4 = state->h[4];
--
--	do {
--		/* h += m[i] */
--		h0 += (get_unaligned_le32(src +  0) >> 0) & 0x3ffffff;
--		h1 += (get_unaligned_le32(src +  3) >> 2) & 0x3ffffff;
--		h2 += (get_unaligned_le32(src +  6) >> 4) & 0x3ffffff;
--		h3 += (get_unaligned_le32(src +  9) >> 6) & 0x3ffffff;
--		h4 += (get_unaligned_le32(src + 12) >> 8) | (hibit << 24);
--
--		/* h *= r */
--		d0 = mlt(h0, r0) + mlt(h1, s4) + mlt(h2, s3) +
--		     mlt(h3, s2) + mlt(h4, s1);
--		d1 = mlt(h0, r1) + mlt(h1, r0) + mlt(h2, s4) +
--		     mlt(h3, s3) + mlt(h4, s2);
--		d2 = mlt(h0, r2) + mlt(h1, r1) + mlt(h2, r0) +
--		     mlt(h3, s4) + mlt(h4, s3);
--		d3 = mlt(h0, r3) + mlt(h1, r2) + mlt(h2, r1) +
--		     mlt(h3, r0) + mlt(h4, s4);
--		d4 = mlt(h0, r4) + mlt(h1, r3) + mlt(h2, r2) +
--		     mlt(h3, r1) + mlt(h4, r0);
--
--		/* (partial) h %= p */
--		d1 += sr(d0, 26);     h0 = and(d0, 0x3ffffff);
--		d2 += sr(d1, 26);     h1 = and(d1, 0x3ffffff);
--		d3 += sr(d2, 26);     h2 = and(d2, 0x3ffffff);
--		d4 += sr(d3, 26);     h3 = and(d3, 0x3ffffff);
--		h0 += sr(d4, 26) * 5; h4 = and(d4, 0x3ffffff);
--		h1 += h0 >> 26;       h0 = h0 & 0x3ffffff;
--
--		src += POLY1305_BLOCK_SIZE;
--	} while (--nblocks);
--
--	state->h[0] = h0;
--	state->h[1] = h1;
--	state->h[2] = h2;
--	state->h[3] = h3;
--	state->h[4] = h4;
--}
--EXPORT_SYMBOL_GPL(poly1305_core_blocks);
--
--void poly1305_core_emit(const struct poly1305_state *state, void *dst)
--{
--	u32 h0, h1, h2, h3, h4;
--	u32 g0, g1, g2, g3, g4;
--	u32 mask;
--
--	/* fully carry h */
--	h0 = state->h[0];
--	h1 = state->h[1];
--	h2 = state->h[2];
--	h3 = state->h[3];
--	h4 = state->h[4];
--
--	h2 += (h1 >> 26);     h1 = h1 & 0x3ffffff;
--	h3 += (h2 >> 26);     h2 = h2 & 0x3ffffff;
--	h4 += (h3 >> 26);     h3 = h3 & 0x3ffffff;
--	h0 += (h4 >> 26) * 5; h4 = h4 & 0x3ffffff;
--	h1 += (h0 >> 26);     h0 = h0 & 0x3ffffff;
--
--	/* compute h + -p */
--	g0 = h0 + 5;
--	g1 = h1 + (g0 >> 26);             g0 &= 0x3ffffff;
--	g2 = h2 + (g1 >> 26);             g1 &= 0x3ffffff;
--	g3 = h3 + (g2 >> 26);             g2 &= 0x3ffffff;
--	g4 = h4 + (g3 >> 26) - (1 << 26); g3 &= 0x3ffffff;
--
--	/* select h if h < p, or h + -p if h >= p */
--	mask = (g4 >> ((sizeof(u32) * 8) - 1)) - 1;
--	g0 &= mask;
--	g1 &= mask;
--	g2 &= mask;
--	g3 &= mask;
--	g4 &= mask;
--	mask = ~mask;
--	h0 = (h0 & mask) | g0;
--	h1 = (h1 & mask) | g1;
--	h2 = (h2 & mask) | g2;
--	h3 = (h3 & mask) | g3;
--	h4 = (h4 & mask) | g4;
--
--	/* h = h % (2^128) */
--	put_unaligned_le32((h0 >>  0) | (h1 << 26), dst +  0);
--	put_unaligned_le32((h1 >>  6) | (h2 << 20), dst +  4);
--	put_unaligned_le32((h2 >> 12) | (h3 << 14), dst +  8);
--	put_unaligned_le32((h3 >> 18) | (h4 <<  8), dst + 12);
--}
--EXPORT_SYMBOL_GPL(poly1305_core_emit);
--
- void poly1305_init_generic(struct poly1305_desc_ctx *desc, const u8 *key)
- {
--	poly1305_core_setkey(desc->r, key);
-+	poly1305_core_setkey(&desc->core_r, key);
- 	desc->s[0] = get_unaligned_le32(key + 16);
- 	desc->s[1] = get_unaligned_le32(key + 20);
- 	desc->s[2] = get_unaligned_le32(key + 24);
-@@ -164,7 +22,7 @@ void poly1305_init_generic(struct poly13
- 	poly1305_core_init(&desc->h);
- 	desc->buflen = 0;
- 	desc->sset = true;
--	desc->rset = 1;
-+	desc->rset = 2;
- }
- EXPORT_SYMBOL_GPL(poly1305_init_generic);
- 
-@@ -181,13 +39,14 @@ void poly1305_update_generic(struct poly
- 		desc->buflen += bytes;
- 
- 		if (desc->buflen == POLY1305_BLOCK_SIZE) {
--			poly1305_core_blocks(&desc->h, desc->r, desc->buf, 1, 1);
-+			poly1305_core_blocks(&desc->h, &desc->core_r, desc->buf,
-+					     1, 1);
- 			desc->buflen = 0;
- 		}
- 	}
- 
- 	if (likely(nbytes >= POLY1305_BLOCK_SIZE)) {
--		poly1305_core_blocks(&desc->h, desc->r, src,
-+		poly1305_core_blocks(&desc->h, &desc->core_r, src,
- 				     nbytes / POLY1305_BLOCK_SIZE, 1);
- 		src += nbytes - (nbytes % POLY1305_BLOCK_SIZE);
- 		nbytes %= POLY1305_BLOCK_SIZE;
-@@ -202,28 +61,14 @@ EXPORT_SYMBOL_GPL(poly1305_update_generi
- 
- void poly1305_final_generic(struct poly1305_desc_ctx *desc, u8 *dst)
- {
--	__le32 digest[4];
--	u64 f = 0;
--
- 	if (unlikely(desc->buflen)) {
- 		desc->buf[desc->buflen++] = 1;
- 		memset(desc->buf + desc->buflen, 0,
- 		       POLY1305_BLOCK_SIZE - desc->buflen);
--		poly1305_core_blocks(&desc->h, desc->r, desc->buf, 1, 0);
-+		poly1305_core_blocks(&desc->h, &desc->core_r, desc->buf, 1, 0);
- 	}
- 
--	poly1305_core_emit(&desc->h, digest);
--
--	/* mac = (h + s) % (2^128) */
--	f = (f >> 32) + le32_to_cpu(digest[0]) + desc->s[0];
--	put_unaligned_le32(f, dst + 0);
--	f = (f >> 32) + le32_to_cpu(digest[1]) + desc->s[1];
--	put_unaligned_le32(f, dst + 4);
--	f = (f >> 32) + le32_to_cpu(digest[2]) + desc->s[2];
--	put_unaligned_le32(f, dst + 8);
--	f = (f >> 32) + le32_to_cpu(digest[3]) + desc->s[3];
--	put_unaligned_le32(f, dst + 12);
--
-+	poly1305_core_emit(&desc->h, desc->s, dst);
- 	*desc = (struct poly1305_desc_ctx){};
- }
- EXPORT_SYMBOL_GPL(poly1305_final_generic);
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0042-crypto-x86-poly1305-import-unmodified-cryptogams-imp.patch b/target/linux/generic/backport-5.4/080-wireguard-0042-crypto-x86-poly1305-import-unmodified-cryptogams-imp.patch
deleted file mode 100644
index 8e52383ae1..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0042-crypto-x86-poly1305-import-unmodified-cryptogams-imp.patch
+++ /dev/null
@@ -1,4183 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Sun, 5 Jan 2020 22:40:47 -0500
-Subject: [PATCH] crypto: x86/poly1305 - import unmodified cryptogams
- implementation
-
-commit 0896ca2a0cb6127e8a129f1f2a680d49b6b0f65c upstream.
-
-These x86_64 vectorized implementations come from Andy Polyakov's
-CRYPTOGAMS implementation, and are included here in raw form without
-modification, so that subsequent commits that fix these up for the
-kernel can see how it has changed.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/poly1305-x86_64-cryptogams.pl | 4159 +++++++++++++++++
- 1 file changed, 4159 insertions(+)
- create mode 100644 arch/x86/crypto/poly1305-x86_64-cryptogams.pl
-
---- /dev/null
-+++ b/arch/x86/crypto/poly1305-x86_64-cryptogams.pl
-@@ -0,0 +1,4159 @@
-+#! /usr/bin/env perl
-+# Copyright 2016-2018 The OpenSSL Project Authors. All Rights Reserved.
-+#
-+# Licensed under the OpenSSL license (the "License").  You may not use
-+# this file except in compliance with the License.  You can obtain a copy
-+# in the file LICENSE in the source distribution or at
-+# https://www.openssl.org/source/license.html
-+
-+#
-+# ====================================================================
-+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
-+# project. The module is, however, dual licensed under OpenSSL and
-+# CRYPTOGAMS licenses depending on where you obtain it. For further
-+# details see http://www.openssl.org/~appro/cryptogams/.
-+# ====================================================================
-+#
-+# This module implements Poly1305 hash for x86_64.
-+#
-+# March 2015
-+#
-+# Initial release.
-+#
-+# December 2016
-+#
-+# Add AVX512F+VL+BW code path.
-+#
-+# November 2017
-+#
-+# Convert AVX512F+VL+BW code path to pure AVX512F, so that it can be
-+# executed even on Knights Landing. Trigger for modification was
-+# observation that AVX512 code paths can negatively affect overall
-+# Skylake-X system performance. Since we are likely to suppress
-+# AVX512F capability flag [at least on Skylake-X], conversion serves
-+# as kind of "investment protection". Note that next *lake processor,
-+# Cannolake, has AVX512IFMA code path to execute...
-+#
-+# Numbers are cycles per processed byte with poly1305_blocks alone,
-+# measured with rdtsc at fixed clock frequency.
-+#
-+#		IALU/gcc-4.8(*)	AVX(**)		AVX2	AVX-512
-+# P4		4.46/+120%	-
-+# Core 2	2.41/+90%	-
-+# Westmere	1.88/+120%	-
-+# Sandy Bridge	1.39/+140%	1.10
-+# Haswell	1.14/+175%	1.11		0.65
-+# Skylake[-X]	1.13/+120%	0.96		0.51	[0.35]
-+# Silvermont	2.83/+95%	-
-+# Knights L	3.60/?		1.65		1.10	0.41(***)
-+# Goldmont	1.70/+180%	-
-+# VIA Nano	1.82/+150%	-
-+# Sledgehammer	1.38/+160%	-
-+# Bulldozer	2.30/+130%	0.97
-+# Ryzen		1.15/+200%	1.08		1.18
-+#
-+# (*)	improvement coefficients relative to clang are more modest and
-+#	are ~50% on most processors, in both cases we are comparing to
-+#	__int128 code;
-+# (**)	SSE2 implementation was attempted, but among non-AVX processors
-+#	it was faster than integer-only code only on older Intel P4 and
-+#	Core processors, 50-30%, less newer processor is, but slower on
-+#	contemporary ones, for example almost 2x slower on Atom, and as
-+#	former are naturally disappearing, SSE2 is deemed unnecessary;
-+# (***)	strangely enough performance seems to vary from core to core,
-+#	listed result is best case;
-+
-+$flavour = shift;
-+$output  = shift;
-+if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
-+
-+$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
-+
-+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-+( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
-+( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
-+die "can't locate x86_64-xlate.pl";
-+
-+if (`$ENV{CC} -Wa,-v -c -o /dev/null -x assembler /dev/null 2>&1`
-+		=~ /GNU assembler version ([2-9]\.[0-9]+)/) {
-+	$avx = ($1>=2.19) + ($1>=2.22) + ($1>=2.25) + ($1>=2.26);
-+}
-+
-+if (!$avx && $win64 && ($flavour =~ /nasm/ || $ENV{ASM} =~ /nasm/) &&
-+	   `nasm -v 2>&1` =~ /NASM version ([2-9]\.[0-9]+)(?:\.([0-9]+))?/) {
-+	$avx = ($1>=2.09) + ($1>=2.10) + 2 * ($1>=2.12);
-+	$avx += 2 if ($1==2.11 && $2>=8);
-+}
-+
-+if (!$avx && $win64 && ($flavour =~ /masm/ || $ENV{ASM} =~ /ml64/) &&
-+	   `ml64 2>&1` =~ /Version ([0-9]+)\./) {
-+	$avx = ($1>=10) + ($1>=12);
-+}
-+
-+if (!$avx && `$ENV{CC} -v 2>&1` =~ /((?:^clang|LLVM) version|.*based on LLVM) ([3-9]\.[0-9]+)/) {
-+	$avx = ($2>=3.0) + ($2>3.0);
-+}
-+
-+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
-+*STDOUT=*OUT;
-+
-+my ($ctx,$inp,$len,$padbit)=("%rdi","%rsi","%rdx","%rcx");
-+my ($mac,$nonce)=($inp,$len);	# *_emit arguments
-+my ($d1,$d2,$d3, $r0,$r1,$s1)=map("%r$_",(8..13));
-+my ($h0,$h1,$h2)=("%r14","%rbx","%rbp");
-+
-+sub poly1305_iteration {
-+# input:	copy of $r1 in %rax, $h0-$h2, $r0-$r1
-+# output:	$h0-$h2 *= $r0-$r1
-+$code.=<<___;
-+	mulq	$h0			# h0*r1
-+	mov	%rax,$d2
-+	 mov	$r0,%rax
-+	mov	%rdx,$d3
-+
-+	mulq	$h0			# h0*r0
-+	mov	%rax,$h0		# future $h0
-+	 mov	$r0,%rax
-+	mov	%rdx,$d1
-+
-+	mulq	$h1			# h1*r0
-+	add	%rax,$d2
-+	 mov	$s1,%rax
-+	adc	%rdx,$d3
-+
-+	mulq	$h1			# h1*s1
-+	 mov	$h2,$h1			# borrow $h1
-+	add	%rax,$h0
-+	adc	%rdx,$d1
-+
-+	imulq	$s1,$h1			# h2*s1
-+	add	$h1,$d2
-+	 mov	$d1,$h1
-+	adc	\$0,$d3
-+
-+	imulq	$r0,$h2			# h2*r0
-+	add	$d2,$h1
-+	mov	\$-4,%rax		# mask value
-+	adc	$h2,$d3
-+
-+	and	$d3,%rax		# last reduction step
-+	mov	$d3,$h2
-+	shr	\$2,$d3
-+	and	\$3,$h2
-+	add	$d3,%rax
-+	add	%rax,$h0
-+	adc	\$0,$h1
-+	adc	\$0,$h2
-+___
-+}
-+
-+########################################################################
-+# Layout of opaque area is following.
-+#
-+#	unsigned __int64 h[3];		# current hash value base 2^64
-+#	unsigned __int64 r[2];		# key value base 2^64
-+
-+$code.=<<___;
-+.text
-+
-+.extern	OPENSSL_ia32cap_P
-+
-+.globl	poly1305_init
-+.hidden	poly1305_init
-+.globl	poly1305_blocks
-+.hidden	poly1305_blocks
-+.globl	poly1305_emit
-+.hidden	poly1305_emit
-+
-+.type	poly1305_init,\@function,3
-+.align	32
-+poly1305_init:
-+	xor	%rax,%rax
-+	mov	%rax,0($ctx)		# initialize hash value
-+	mov	%rax,8($ctx)
-+	mov	%rax,16($ctx)
-+
-+	cmp	\$0,$inp
-+	je	.Lno_key
-+
-+	lea	poly1305_blocks(%rip),%r10
-+	lea	poly1305_emit(%rip),%r11
-+___
-+$code.=<<___	if ($avx);
-+	mov	OPENSSL_ia32cap_P+4(%rip),%r9
-+	lea	poly1305_blocks_avx(%rip),%rax
-+	lea	poly1305_emit_avx(%rip),%rcx
-+	bt	\$`60-32`,%r9		# AVX?
-+	cmovc	%rax,%r10
-+	cmovc	%rcx,%r11
-+___
-+$code.=<<___	if ($avx>1);
-+	lea	poly1305_blocks_avx2(%rip),%rax
-+	bt	\$`5+32`,%r9		# AVX2?
-+	cmovc	%rax,%r10
-+___
-+$code.=<<___	if ($avx>3);
-+	mov	\$`(1<<31|1<<21|1<<16)`,%rax
-+	shr	\$32,%r9
-+	and	%rax,%r9
-+	cmp	%rax,%r9
-+	je	.Linit_base2_44
-+___
-+$code.=<<___;
-+	mov	\$0x0ffffffc0fffffff,%rax
-+	mov	\$0x0ffffffc0ffffffc,%rcx
-+	and	0($inp),%rax
-+	and	8($inp),%rcx
-+	mov	%rax,24($ctx)
-+	mov	%rcx,32($ctx)
-+___
-+$code.=<<___	if ($flavour !~ /elf32/);
-+	mov	%r10,0(%rdx)
-+	mov	%r11,8(%rdx)
-+___
-+$code.=<<___	if ($flavour =~ /elf32/);
-+	mov	%r10d,0(%rdx)
-+	mov	%r11d,4(%rdx)
-+___
-+$code.=<<___;
-+	mov	\$1,%eax
-+.Lno_key:
-+	ret
-+.size	poly1305_init,.-poly1305_init
-+
-+.type	poly1305_blocks,\@function,4
-+.align	32
-+poly1305_blocks:
-+.cfi_startproc
-+.Lblocks:
-+	shr	\$4,$len
-+	jz	.Lno_data		# too short
-+
-+	push	%rbx
-+.cfi_push	%rbx
-+	push	%rbp
-+.cfi_push	%rbp
-+	push	%r12
-+.cfi_push	%r12
-+	push	%r13
-+.cfi_push	%r13
-+	push	%r14
-+.cfi_push	%r14
-+	push	%r15
-+.cfi_push	%r15
-+.Lblocks_body:
-+
-+	mov	$len,%r15		# reassign $len
-+
-+	mov	24($ctx),$r0		# load r
-+	mov	32($ctx),$s1
-+
-+	mov	0($ctx),$h0		# load hash value
-+	mov	8($ctx),$h1
-+	mov	16($ctx),$h2
-+
-+	mov	$s1,$r1
-+	shr	\$2,$s1
-+	mov	$r1,%rax
-+	add	$r1,$s1			# s1 = r1 + (r1 >> 2)
-+	jmp	.Loop
-+
-+.align	32
-+.Loop:
-+	add	0($inp),$h0		# accumulate input
-+	adc	8($inp),$h1
-+	lea	16($inp),$inp
-+	adc	$padbit,$h2
-+___
-+	&poly1305_iteration();
-+$code.=<<___;
-+	mov	$r1,%rax
-+	dec	%r15			# len-=16
-+	jnz	.Loop
-+
-+	mov	$h0,0($ctx)		# store hash value
-+	mov	$h1,8($ctx)
-+	mov	$h2,16($ctx)
-+
-+	mov	0(%rsp),%r15
-+.cfi_restore	%r15
-+	mov	8(%rsp),%r14
-+.cfi_restore	%r14
-+	mov	16(%rsp),%r13
-+.cfi_restore	%r13
-+	mov	24(%rsp),%r12
-+.cfi_restore	%r12
-+	mov	32(%rsp),%rbp
-+.cfi_restore	%rbp
-+	mov	40(%rsp),%rbx
-+.cfi_restore	%rbx
-+	lea	48(%rsp),%rsp
-+.cfi_adjust_cfa_offset	-48
-+.Lno_data:
-+.Lblocks_epilogue:
-+	ret
-+.cfi_endproc
-+.size	poly1305_blocks,.-poly1305_blocks
-+
-+.type	poly1305_emit,\@function,3
-+.align	32
-+poly1305_emit:
-+.Lemit:
-+	mov	0($ctx),%r8	# load hash value
-+	mov	8($ctx),%r9
-+	mov	16($ctx),%r10
-+
-+	mov	%r8,%rax
-+	add	\$5,%r8		# compare to modulus
-+	mov	%r9,%rcx
-+	adc	\$0,%r9
-+	adc	\$0,%r10
-+	shr	\$2,%r10	# did 130-bit value overflow?
-+	cmovnz	%r8,%rax
-+	cmovnz	%r9,%rcx
-+
-+	add	0($nonce),%rax	# accumulate nonce
-+	adc	8($nonce),%rcx
-+	mov	%rax,0($mac)	# write result
-+	mov	%rcx,8($mac)
-+
-+	ret
-+.size	poly1305_emit,.-poly1305_emit
-+___
-+if ($avx) {
-+
-+########################################################################
-+# Layout of opaque area is following.
-+#
-+#	unsigned __int32 h[5];		# current hash value base 2^26
-+#	unsigned __int32 is_base2_26;
-+#	unsigned __int64 r[2];		# key value base 2^64
-+#	unsigned __int64 pad;
-+#	struct { unsigned __int32 r^2, r^1, r^4, r^3; } r[9];
-+#
-+# where r^n are base 2^26 digits of degrees of multiplier key. There are
-+# 5 digits, but last four are interleaved with multiples of 5, totalling
-+# in 9 elements: r0, r1, 5*r1, r2, 5*r2, r3, 5*r3, r4, 5*r4.
-+
-+my ($H0,$H1,$H2,$H3,$H4, $T0,$T1,$T2,$T3,$T4, $D0,$D1,$D2,$D3,$D4, $MASK) =
-+    map("%xmm$_",(0..15));
-+
-+$code.=<<___;
-+.type	__poly1305_block,\@abi-omnipotent
-+.align	32
-+__poly1305_block:
-+___
-+	&poly1305_iteration();
-+$code.=<<___;
-+	ret
-+.size	__poly1305_block,.-__poly1305_block
-+
-+.type	__poly1305_init_avx,\@abi-omnipotent
-+.align	32
-+__poly1305_init_avx:
-+	mov	$r0,$h0
-+	mov	$r1,$h1
-+	xor	$h2,$h2
-+
-+	lea	48+64($ctx),$ctx	# size optimization
-+
-+	mov	$r1,%rax
-+	call	__poly1305_block	# r^2
-+
-+	mov	\$0x3ffffff,%eax	# save interleaved r^2 and r base 2^26
-+	mov	\$0x3ffffff,%edx
-+	mov	$h0,$d1
-+	and	$h0#d,%eax
-+	mov	$r0,$d2
-+	and	$r0#d,%edx
-+	mov	%eax,`16*0+0-64`($ctx)
-+	shr	\$26,$d1
-+	mov	%edx,`16*0+4-64`($ctx)
-+	shr	\$26,$d2
-+
-+	mov	\$0x3ffffff,%eax
-+	mov	\$0x3ffffff,%edx
-+	and	$d1#d,%eax
-+	and	$d2#d,%edx
-+	mov	%eax,`16*1+0-64`($ctx)
-+	lea	(%rax,%rax,4),%eax	# *5
-+	mov	%edx,`16*1+4-64`($ctx)
-+	lea	(%rdx,%rdx,4),%edx	# *5
-+	mov	%eax,`16*2+0-64`($ctx)
-+	shr	\$26,$d1
-+	mov	%edx,`16*2+4-64`($ctx)
-+	shr	\$26,$d2
-+
-+	mov	$h1,%rax
-+	mov	$r1,%rdx
-+	shl	\$12,%rax
-+	shl	\$12,%rdx
-+	or	$d1,%rax
-+	or	$d2,%rdx
-+	and	\$0x3ffffff,%eax
-+	and	\$0x3ffffff,%edx
-+	mov	%eax,`16*3+0-64`($ctx)
-+	lea	(%rax,%rax,4),%eax	# *5
-+	mov	%edx,`16*3+4-64`($ctx)
-+	lea	(%rdx,%rdx,4),%edx	# *5
-+	mov	%eax,`16*4+0-64`($ctx)
-+	mov	$h1,$d1
-+	mov	%edx,`16*4+4-64`($ctx)
-+	mov	$r1,$d2
-+
-+	mov	\$0x3ffffff,%eax
-+	mov	\$0x3ffffff,%edx
-+	shr	\$14,$d1
-+	shr	\$14,$d2
-+	and	$d1#d,%eax
-+	and	$d2#d,%edx
-+	mov	%eax,`16*5+0-64`($ctx)
-+	lea	(%rax,%rax,4),%eax	# *5
-+	mov	%edx,`16*5+4-64`($ctx)
-+	lea	(%rdx,%rdx,4),%edx	# *5
-+	mov	%eax,`16*6+0-64`($ctx)
-+	shr	\$26,$d1
-+	mov	%edx,`16*6+4-64`($ctx)
-+	shr	\$26,$d2
-+
-+	mov	$h2,%rax
-+	shl	\$24,%rax
-+	or	%rax,$d1
-+	mov	$d1#d,`16*7+0-64`($ctx)
-+	lea	($d1,$d1,4),$d1		# *5
-+	mov	$d2#d,`16*7+4-64`($ctx)
-+	lea	($d2,$d2,4),$d2		# *5
-+	mov	$d1#d,`16*8+0-64`($ctx)
-+	mov	$d2#d,`16*8+4-64`($ctx)
-+
-+	mov	$r1,%rax
-+	call	__poly1305_block	# r^3
-+
-+	mov	\$0x3ffffff,%eax	# save r^3 base 2^26
-+	mov	$h0,$d1
-+	and	$h0#d,%eax
-+	shr	\$26,$d1
-+	mov	%eax,`16*0+12-64`($ctx)
-+
-+	mov	\$0x3ffffff,%edx
-+	and	$d1#d,%edx
-+	mov	%edx,`16*1+12-64`($ctx)
-+	lea	(%rdx,%rdx,4),%edx	# *5
-+	shr	\$26,$d1
-+	mov	%edx,`16*2+12-64`($ctx)
-+
-+	mov	$h1,%rax
-+	shl	\$12,%rax
-+	or	$d1,%rax
-+	and	\$0x3ffffff,%eax
-+	mov	%eax,`16*3+12-64`($ctx)
-+	lea	(%rax,%rax,4),%eax	# *5
-+	mov	$h1,$d1
-+	mov	%eax,`16*4+12-64`($ctx)
-+
-+	mov	\$0x3ffffff,%edx
-+	shr	\$14,$d1
-+	and	$d1#d,%edx
-+	mov	%edx,`16*5+12-64`($ctx)
-+	lea	(%rdx,%rdx,4),%edx	# *5
-+	shr	\$26,$d1
-+	mov	%edx,`16*6+12-64`($ctx)
-+
-+	mov	$h2,%rax
-+	shl	\$24,%rax
-+	or	%rax,$d1
-+	mov	$d1#d,`16*7+12-64`($ctx)
-+	lea	($d1,$d1,4),$d1		# *5
-+	mov	$d1#d,`16*8+12-64`($ctx)
-+
-+	mov	$r1,%rax
-+	call	__poly1305_block	# r^4
-+
-+	mov	\$0x3ffffff,%eax	# save r^4 base 2^26
-+	mov	$h0,$d1
-+	and	$h0#d,%eax
-+	shr	\$26,$d1
-+	mov	%eax,`16*0+8-64`($ctx)
-+
-+	mov	\$0x3ffffff,%edx
-+	and	$d1#d,%edx
-+	mov	%edx,`16*1+8-64`($ctx)
-+	lea	(%rdx,%rdx,4),%edx	# *5
-+	shr	\$26,$d1
-+	mov	%edx,`16*2+8-64`($ctx)
-+
-+	mov	$h1,%rax
-+	shl	\$12,%rax
-+	or	$d1,%rax
-+	and	\$0x3ffffff,%eax
-+	mov	%eax,`16*3+8-64`($ctx)
-+	lea	(%rax,%rax,4),%eax	# *5
-+	mov	$h1,$d1
-+	mov	%eax,`16*4+8-64`($ctx)
-+
-+	mov	\$0x3ffffff,%edx
-+	shr	\$14,$d1
-+	and	$d1#d,%edx
-+	mov	%edx,`16*5+8-64`($ctx)
-+	lea	(%rdx,%rdx,4),%edx	# *5
-+	shr	\$26,$d1
-+	mov	%edx,`16*6+8-64`($ctx)
-+
-+	mov	$h2,%rax
-+	shl	\$24,%rax
-+	or	%rax,$d1
-+	mov	$d1#d,`16*7+8-64`($ctx)
-+	lea	($d1,$d1,4),$d1		# *5
-+	mov	$d1#d,`16*8+8-64`($ctx)
-+
-+	lea	-48-64($ctx),$ctx	# size [de-]optimization
-+	ret
-+.size	__poly1305_init_avx,.-__poly1305_init_avx
-+
-+.type	poly1305_blocks_avx,\@function,4
-+.align	32
-+poly1305_blocks_avx:
-+.cfi_startproc
-+	mov	20($ctx),%r8d		# is_base2_26
-+	cmp	\$128,$len
-+	jae	.Lblocks_avx
-+	test	%r8d,%r8d
-+	jz	.Lblocks
-+
-+.Lblocks_avx:
-+	and	\$-16,$len
-+	jz	.Lno_data_avx
-+
-+	vzeroupper
-+
-+	test	%r8d,%r8d
-+	jz	.Lbase2_64_avx
-+
-+	test	\$31,$len
-+	jz	.Leven_avx
-+
-+	push	%rbx
-+.cfi_push	%rbx
-+	push	%rbp
-+.cfi_push	%rbp
-+	push	%r12
-+.cfi_push	%r12
-+	push	%r13
-+.cfi_push	%r13
-+	push	%r14
-+.cfi_push	%r14
-+	push	%r15
-+.cfi_push	%r15
-+.Lblocks_avx_body:
-+
-+	mov	$len,%r15		# reassign $len
-+
-+	mov	0($ctx),$d1		# load hash value
-+	mov	8($ctx),$d2
-+	mov	16($ctx),$h2#d
-+
-+	mov	24($ctx),$r0		# load r
-+	mov	32($ctx),$s1
-+
-+	################################# base 2^26 -> base 2^64
-+	mov	$d1#d,$h0#d
-+	and	\$`-1*(1<<31)`,$d1
-+	mov	$d2,$r1			# borrow $r1
-+	mov	$d2#d,$h1#d
-+	and	\$`-1*(1<<31)`,$d2
-+
-+	shr	\$6,$d1
-+	shl	\$52,$r1
-+	add	$d1,$h0
-+	shr	\$12,$h1
-+	shr	\$18,$d2
-+	add	$r1,$h0
-+	adc	$d2,$h1
-+
-+	mov	$h2,$d1
-+	shl	\$40,$d1
-+	shr	\$24,$h2
-+	add	$d1,$h1
-+	adc	\$0,$h2			# can be partially reduced...
-+
-+	mov	\$-4,$d2		# ... so reduce
-+	mov	$h2,$d1
-+	and	$h2,$d2
-+	shr	\$2,$d1
-+	and	\$3,$h2
-+	add	$d2,$d1			# =*5
-+	add	$d1,$h0
-+	adc	\$0,$h1
-+	adc	\$0,$h2
-+
-+	mov	$s1,$r1
-+	mov	$s1,%rax
-+	shr	\$2,$s1
-+	add	$r1,$s1			# s1 = r1 + (r1 >> 2)
-+
-+	add	0($inp),$h0		# accumulate input
-+	adc	8($inp),$h1
-+	lea	16($inp),$inp
-+	adc	$padbit,$h2
-+
-+	call	__poly1305_block
-+
-+	test	$padbit,$padbit		# if $padbit is zero,
-+	jz	.Lstore_base2_64_avx	# store hash in base 2^64 format
-+
-+	################################# base 2^64 -> base 2^26
-+	mov	$h0,%rax
-+	mov	$h0,%rdx
-+	shr	\$52,$h0
-+	mov	$h1,$r0
-+	mov	$h1,$r1
-+	shr	\$26,%rdx
-+	and	\$0x3ffffff,%rax	# h[0]
-+	shl	\$12,$r0
-+	and	\$0x3ffffff,%rdx	# h[1]
-+	shr	\$14,$h1
-+	or	$r0,$h0
-+	shl	\$24,$h2
-+	and	\$0x3ffffff,$h0		# h[2]
-+	shr	\$40,$r1
-+	and	\$0x3ffffff,$h1		# h[3]
-+	or	$r1,$h2			# h[4]
-+
-+	sub	\$16,%r15
-+	jz	.Lstore_base2_26_avx
-+
-+	vmovd	%rax#d,$H0
-+	vmovd	%rdx#d,$H1
-+	vmovd	$h0#d,$H2
-+	vmovd	$h1#d,$H3
-+	vmovd	$h2#d,$H4
-+	jmp	.Lproceed_avx
-+
-+.align	32
-+.Lstore_base2_64_avx:
-+	mov	$h0,0($ctx)
-+	mov	$h1,8($ctx)
-+	mov	$h2,16($ctx)		# note that is_base2_26 is zeroed
-+	jmp	.Ldone_avx
-+
-+.align	16
-+.Lstore_base2_26_avx:
-+	mov	%rax#d,0($ctx)		# store hash value base 2^26
-+	mov	%rdx#d,4($ctx)
-+	mov	$h0#d,8($ctx)
-+	mov	$h1#d,12($ctx)
-+	mov	$h2#d,16($ctx)
-+.align	16
-+.Ldone_avx:
-+	mov	0(%rsp),%r15
-+.cfi_restore	%r15
-+	mov	8(%rsp),%r14
-+.cfi_restore	%r14
-+	mov	16(%rsp),%r13
-+.cfi_restore	%r13
-+	mov	24(%rsp),%r12
-+.cfi_restore	%r12
-+	mov	32(%rsp),%rbp
-+.cfi_restore	%rbp
-+	mov	40(%rsp),%rbx
-+.cfi_restore	%rbx
-+	lea	48(%rsp),%rsp
-+.cfi_adjust_cfa_offset	-48
-+.Lno_data_avx:
-+.Lblocks_avx_epilogue:
-+	ret
-+.cfi_endproc
-+
-+.align	32
-+.Lbase2_64_avx:
-+.cfi_startproc
-+	push	%rbx
-+.cfi_push	%rbx
-+	push	%rbp
-+.cfi_push	%rbp
-+	push	%r12
-+.cfi_push	%r12
-+	push	%r13
-+.cfi_push	%r13
-+	push	%r14
-+.cfi_push	%r14
-+	push	%r15
-+.cfi_push	%r15
-+.Lbase2_64_avx_body:
-+
-+	mov	$len,%r15		# reassign $len
-+
-+	mov	24($ctx),$r0		# load r
-+	mov	32($ctx),$s1
-+
-+	mov	0($ctx),$h0		# load hash value
-+	mov	8($ctx),$h1
-+	mov	16($ctx),$h2#d
-+
-+	mov	$s1,$r1
-+	mov	$s1,%rax
-+	shr	\$2,$s1
-+	add	$r1,$s1			# s1 = r1 + (r1 >> 2)
-+
-+	test	\$31,$len
-+	jz	.Linit_avx
-+
-+	add	0($inp),$h0		# accumulate input
-+	adc	8($inp),$h1
-+	lea	16($inp),$inp
-+	adc	$padbit,$h2
-+	sub	\$16,%r15
-+
-+	call	__poly1305_block
-+
-+.Linit_avx:
-+	################################# base 2^64 -> base 2^26
-+	mov	$h0,%rax
-+	mov	$h0,%rdx
-+	shr	\$52,$h0
-+	mov	$h1,$d1
-+	mov	$h1,$d2
-+	shr	\$26,%rdx
-+	and	\$0x3ffffff,%rax	# h[0]
-+	shl	\$12,$d1
-+	and	\$0x3ffffff,%rdx	# h[1]
-+	shr	\$14,$h1
-+	or	$d1,$h0
-+	shl	\$24,$h2
-+	and	\$0x3ffffff,$h0		# h[2]
-+	shr	\$40,$d2
-+	and	\$0x3ffffff,$h1		# h[3]
-+	or	$d2,$h2			# h[4]
-+
-+	vmovd	%rax#d,$H0
-+	vmovd	%rdx#d,$H1
-+	vmovd	$h0#d,$H2
-+	vmovd	$h1#d,$H3
-+	vmovd	$h2#d,$H4
-+	movl	\$1,20($ctx)		# set is_base2_26
-+
-+	call	__poly1305_init_avx
-+
-+.Lproceed_avx:
-+	mov	%r15,$len
-+
-+	mov	0(%rsp),%r15
-+.cfi_restore	%r15
-+	mov	8(%rsp),%r14
-+.cfi_restore	%r14
-+	mov	16(%rsp),%r13
-+.cfi_restore	%r13
-+	mov	24(%rsp),%r12
-+.cfi_restore	%r12
-+	mov	32(%rsp),%rbp
-+.cfi_restore	%rbp
-+	mov	40(%rsp),%rbx
-+.cfi_restore	%rbx
-+	lea	48(%rsp),%rax
-+	lea	48(%rsp),%rsp
-+.cfi_adjust_cfa_offset	-48
-+.Lbase2_64_avx_epilogue:
-+	jmp	.Ldo_avx
-+.cfi_endproc
-+
-+.align	32
-+.Leven_avx:
-+.cfi_startproc
-+	vmovd		4*0($ctx),$H0		# load hash value
-+	vmovd		4*1($ctx),$H1
-+	vmovd		4*2($ctx),$H2
-+	vmovd		4*3($ctx),$H3
-+	vmovd		4*4($ctx),$H4
-+
-+.Ldo_avx:
-+___
-+$code.=<<___	if (!$win64);
-+	lea		-0x58(%rsp),%r11
-+.cfi_def_cfa		%r11,0x60
-+	sub		\$0x178,%rsp
-+___
-+$code.=<<___	if ($win64);
-+	lea		-0xf8(%rsp),%r11
-+	sub		\$0x218,%rsp
-+	vmovdqa		%xmm6,0x50(%r11)
-+	vmovdqa		%xmm7,0x60(%r11)
-+	vmovdqa		%xmm8,0x70(%r11)
-+	vmovdqa		%xmm9,0x80(%r11)
-+	vmovdqa		%xmm10,0x90(%r11)
-+	vmovdqa		%xmm11,0xa0(%r11)
-+	vmovdqa		%xmm12,0xb0(%r11)
-+	vmovdqa		%xmm13,0xc0(%r11)
-+	vmovdqa		%xmm14,0xd0(%r11)
-+	vmovdqa		%xmm15,0xe0(%r11)
-+.Ldo_avx_body:
-+___
-+$code.=<<___;
-+	sub		\$64,$len
-+	lea		-32($inp),%rax
-+	cmovc		%rax,$inp
-+
-+	vmovdqu		`16*3`($ctx),$D4	# preload r0^2
-+	lea		`16*3+64`($ctx),$ctx	# size optimization
-+	lea		.Lconst(%rip),%rcx
-+
-+	################################################################
-+	# load input
-+	vmovdqu		16*2($inp),$T0
-+	vmovdqu		16*3($inp),$T1
-+	vmovdqa		64(%rcx),$MASK		# .Lmask26
-+
-+	vpsrldq		\$6,$T0,$T2		# splat input
-+	vpsrldq		\$6,$T1,$T3
-+	vpunpckhqdq	$T1,$T0,$T4		# 4
-+	vpunpcklqdq	$T1,$T0,$T0		# 0:1
-+	vpunpcklqdq	$T3,$T2,$T3		# 2:3
-+
-+	vpsrlq		\$40,$T4,$T4		# 4
-+	vpsrlq		\$26,$T0,$T1
-+	vpand		$MASK,$T0,$T0		# 0
-+	vpsrlq		\$4,$T3,$T2
-+	vpand		$MASK,$T1,$T1		# 1
-+	vpsrlq		\$30,$T3,$T3
-+	vpand		$MASK,$T2,$T2		# 2
-+	vpand		$MASK,$T3,$T3		# 3
-+	vpor		32(%rcx),$T4,$T4	# padbit, yes, always
-+
-+	jbe		.Lskip_loop_avx
-+
-+	# expand and copy pre-calculated table to stack
-+	vmovdqu		`16*1-64`($ctx),$D1
-+	vmovdqu		`16*2-64`($ctx),$D2
-+	vpshufd		\$0xEE,$D4,$D3		# 34xx -> 3434
-+	vpshufd		\$0x44,$D4,$D0		# xx12 -> 1212
-+	vmovdqa		$D3,-0x90(%r11)
-+	vmovdqa		$D0,0x00(%rsp)
-+	vpshufd		\$0xEE,$D1,$D4
-+	vmovdqu		`16*3-64`($ctx),$D0
-+	vpshufd		\$0x44,$D1,$D1
-+	vmovdqa		$D4,-0x80(%r11)
-+	vmovdqa		$D1,0x10(%rsp)
-+	vpshufd		\$0xEE,$D2,$D3
-+	vmovdqu		`16*4-64`($ctx),$D1
-+	vpshufd		\$0x44,$D2,$D2
-+	vmovdqa		$D3,-0x70(%r11)
-+	vmovdqa		$D2,0x20(%rsp)
-+	vpshufd		\$0xEE,$D0,$D4
-+	vmovdqu		`16*5-64`($ctx),$D2
-+	vpshufd		\$0x44,$D0,$D0
-+	vmovdqa		$D4,-0x60(%r11)
-+	vmovdqa		$D0,0x30(%rsp)
-+	vpshufd		\$0xEE,$D1,$D3
-+	vmovdqu		`16*6-64`($ctx),$D0
-+	vpshufd		\$0x44,$D1,$D1
-+	vmovdqa		$D3,-0x50(%r11)
-+	vmovdqa		$D1,0x40(%rsp)
-+	vpshufd		\$0xEE,$D2,$D4
-+	vmovdqu		`16*7-64`($ctx),$D1
-+	vpshufd		\$0x44,$D2,$D2
-+	vmovdqa		$D4,-0x40(%r11)
-+	vmovdqa		$D2,0x50(%rsp)
-+	vpshufd		\$0xEE,$D0,$D3
-+	vmovdqu		`16*8-64`($ctx),$D2
-+	vpshufd		\$0x44,$D0,$D0
-+	vmovdqa		$D3,-0x30(%r11)
-+	vmovdqa		$D0,0x60(%rsp)
-+	vpshufd		\$0xEE,$D1,$D4
-+	vpshufd		\$0x44,$D1,$D1
-+	vmovdqa		$D4,-0x20(%r11)
-+	vmovdqa		$D1,0x70(%rsp)
-+	vpshufd		\$0xEE,$D2,$D3
-+	 vmovdqa	0x00(%rsp),$D4		# preload r0^2
-+	vpshufd		\$0x44,$D2,$D2
-+	vmovdqa		$D3,-0x10(%r11)
-+	vmovdqa		$D2,0x80(%rsp)
-+
-+	jmp		.Loop_avx
-+
-+.align	32
-+.Loop_avx:
-+	################################################################
-+	# ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2
-+	# ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r
-+	#   \___________________/
-+	# ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2
-+	# ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r
-+	#   \___________________/ \____________________/
-+	#
-+	# Note that we start with inp[2:3]*r^2. This is because it
-+	# doesn't depend on reduction in previous iteration.
-+	################################################################
-+	# d4 = h4*r0 + h3*r1   + h2*r2   + h1*r3   + h0*r4
-+	# d3 = h3*r0 + h2*r1   + h1*r2   + h0*r3   + h4*5*r4
-+	# d2 = h2*r0 + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-+	# d1 = h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3 + h2*5*r4
-+	# d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
-+	#
-+	# though note that $Tx and $Hx are "reversed" in this section,
-+	# and $D4 is preloaded with r0^2...
-+
-+	vpmuludq	$T0,$D4,$D0		# d0 = h0*r0
-+	vpmuludq	$T1,$D4,$D1		# d1 = h1*r0
-+	  vmovdqa	$H2,0x20(%r11)				# offload hash
-+	vpmuludq	$T2,$D4,$D2		# d3 = h2*r0
-+	 vmovdqa	0x10(%rsp),$H2		# r1^2
-+	vpmuludq	$T3,$D4,$D3		# d3 = h3*r0
-+	vpmuludq	$T4,$D4,$D4		# d4 = h4*r0
-+
-+	  vmovdqa	$H0,0x00(%r11)				#
-+	vpmuludq	0x20(%rsp),$T4,$H0	# h4*s1
-+	  vmovdqa	$H1,0x10(%r11)				#
-+	vpmuludq	$T3,$H2,$H1		# h3*r1
-+	vpaddq		$H0,$D0,$D0		# d0 += h4*s1
-+	vpaddq		$H1,$D4,$D4		# d4 += h3*r1
-+	  vmovdqa	$H3,0x30(%r11)				#
-+	vpmuludq	$T2,$H2,$H0		# h2*r1
-+	vpmuludq	$T1,$H2,$H1		# h1*r1
-+	vpaddq		$H0,$D3,$D3		# d3 += h2*r1
-+	 vmovdqa	0x30(%rsp),$H3		# r2^2
-+	vpaddq		$H1,$D2,$D2		# d2 += h1*r1
-+	  vmovdqa	$H4,0x40(%r11)				#
-+	vpmuludq	$T0,$H2,$H2		# h0*r1
-+	 vpmuludq	$T2,$H3,$H0		# h2*r2
-+	vpaddq		$H2,$D1,$D1		# d1 += h0*r1
-+
-+	 vmovdqa	0x40(%rsp),$H4		# s2^2
-+	vpaddq		$H0,$D4,$D4		# d4 += h2*r2
-+	vpmuludq	$T1,$H3,$H1		# h1*r2
-+	vpmuludq	$T0,$H3,$H3		# h0*r2
-+	vpaddq		$H1,$D3,$D3		# d3 += h1*r2
-+	 vmovdqa	0x50(%rsp),$H2		# r3^2
-+	vpaddq		$H3,$D2,$D2		# d2 += h0*r2
-+	vpmuludq	$T4,$H4,$H0		# h4*s2
-+	vpmuludq	$T3,$H4,$H4		# h3*s2
-+	vpaddq		$H0,$D1,$D1		# d1 += h4*s2
-+	 vmovdqa	0x60(%rsp),$H3		# s3^2
-+	vpaddq		$H4,$D0,$D0		# d0 += h3*s2
-+
-+	 vmovdqa	0x80(%rsp),$H4		# s4^2
-+	vpmuludq	$T1,$H2,$H1		# h1*r3
-+	vpmuludq	$T0,$H2,$H2		# h0*r3
-+	vpaddq		$H1,$D4,$D4		# d4 += h1*r3
-+	vpaddq		$H2,$D3,$D3		# d3 += h0*r3
-+	vpmuludq	$T4,$H3,$H0		# h4*s3
-+	vpmuludq	$T3,$H3,$H1		# h3*s3
-+	vpaddq		$H0,$D2,$D2		# d2 += h4*s3
-+	 vmovdqu	16*0($inp),$H0				# load input
-+	vpaddq		$H1,$D1,$D1		# d1 += h3*s3
-+	vpmuludq	$T2,$H3,$H3		# h2*s3
-+	 vpmuludq	$T2,$H4,$T2		# h2*s4
-+	vpaddq		$H3,$D0,$D0		# d0 += h2*s3
-+
-+	 vmovdqu	16*1($inp),$H1				#
-+	vpaddq		$T2,$D1,$D1		# d1 += h2*s4
-+	vpmuludq	$T3,$H4,$T3		# h3*s4
-+	vpmuludq	$T4,$H4,$T4		# h4*s4
-+	 vpsrldq	\$6,$H0,$H2				# splat input
-+	vpaddq		$T3,$D2,$D2		# d2 += h3*s4
-+	vpaddq		$T4,$D3,$D3		# d3 += h4*s4
-+	 vpsrldq	\$6,$H1,$H3				#
-+	vpmuludq	0x70(%rsp),$T0,$T4	# h0*r4
-+	vpmuludq	$T1,$H4,$T0		# h1*s4
-+	 vpunpckhqdq	$H1,$H0,$H4		# 4
-+	vpaddq		$T4,$D4,$D4		# d4 += h0*r4
-+	 vmovdqa	-0x90(%r11),$T4		# r0^4
-+	vpaddq		$T0,$D0,$D0		# d0 += h1*s4
-+
-+	vpunpcklqdq	$H1,$H0,$H0		# 0:1
-+	vpunpcklqdq	$H3,$H2,$H3		# 2:3
-+
-+	#vpsrlq		\$40,$H4,$H4		# 4
-+	vpsrldq		\$`40/8`,$H4,$H4	# 4
-+	vpsrlq		\$26,$H0,$H1
-+	vpand		$MASK,$H0,$H0		# 0
-+	vpsrlq		\$4,$H3,$H2
-+	vpand		$MASK,$H1,$H1		# 1
-+	vpand		0(%rcx),$H4,$H4		# .Lmask24
-+	vpsrlq		\$30,$H3,$H3
-+	vpand		$MASK,$H2,$H2		# 2
-+	vpand		$MASK,$H3,$H3		# 3
-+	vpor		32(%rcx),$H4,$H4	# padbit, yes, always
-+
-+	vpaddq		0x00(%r11),$H0,$H0	# add hash value
-+	vpaddq		0x10(%r11),$H1,$H1
-+	vpaddq		0x20(%r11),$H2,$H2
-+	vpaddq		0x30(%r11),$H3,$H3
-+	vpaddq		0x40(%r11),$H4,$H4
-+
-+	lea		16*2($inp),%rax
-+	lea		16*4($inp),$inp
-+	sub		\$64,$len
-+	cmovc		%rax,$inp
-+
-+	################################################################
-+	# Now we accumulate (inp[0:1]+hash)*r^4
-+	################################################################
-+	# d4 = h4*r0 + h3*r1   + h2*r2   + h1*r3   + h0*r4
-+	# d3 = h3*r0 + h2*r1   + h1*r2   + h0*r3   + h4*5*r4
-+	# d2 = h2*r0 + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-+	# d1 = h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3 + h2*5*r4
-+	# d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
-+
-+	vpmuludq	$H0,$T4,$T0		# h0*r0
-+	vpmuludq	$H1,$T4,$T1		# h1*r0
-+	vpaddq		$T0,$D0,$D0
-+	vpaddq		$T1,$D1,$D1
-+	 vmovdqa	-0x80(%r11),$T2		# r1^4
-+	vpmuludq	$H2,$T4,$T0		# h2*r0
-+	vpmuludq	$H3,$T4,$T1		# h3*r0
-+	vpaddq		$T0,$D2,$D2
-+	vpaddq		$T1,$D3,$D3
-+	vpmuludq	$H4,$T4,$T4		# h4*r0
-+	 vpmuludq	-0x70(%r11),$H4,$T0	# h4*s1
-+	vpaddq		$T4,$D4,$D4
-+
-+	vpaddq		$T0,$D0,$D0		# d0 += h4*s1
-+	vpmuludq	$H2,$T2,$T1		# h2*r1
-+	vpmuludq	$H3,$T2,$T0		# h3*r1
-+	vpaddq		$T1,$D3,$D3		# d3 += h2*r1
-+	 vmovdqa	-0x60(%r11),$T3		# r2^4
-+	vpaddq		$T0,$D4,$D4		# d4 += h3*r1
-+	vpmuludq	$H1,$T2,$T1		# h1*r1
-+	vpmuludq	$H0,$T2,$T2		# h0*r1
-+	vpaddq		$T1,$D2,$D2		# d2 += h1*r1
-+	vpaddq		$T2,$D1,$D1		# d1 += h0*r1
-+
-+	 vmovdqa	-0x50(%r11),$T4		# s2^4
-+	vpmuludq	$H2,$T3,$T0		# h2*r2
-+	vpmuludq	$H1,$T3,$T1		# h1*r2
-+	vpaddq		$T0,$D4,$D4		# d4 += h2*r2
-+	vpaddq		$T1,$D3,$D3		# d3 += h1*r2
-+	 vmovdqa	-0x40(%r11),$T2		# r3^4
-+	vpmuludq	$H0,$T3,$T3		# h0*r2
-+	vpmuludq	$H4,$T4,$T0		# h4*s2
-+	vpaddq		$T3,$D2,$D2		# d2 += h0*r2
-+	vpaddq		$T0,$D1,$D1		# d1 += h4*s2
-+	 vmovdqa	-0x30(%r11),$T3		# s3^4
-+	vpmuludq	$H3,$T4,$T4		# h3*s2
-+	 vpmuludq	$H1,$T2,$T1		# h1*r3
-+	vpaddq		$T4,$D0,$D0		# d0 += h3*s2
-+
-+	 vmovdqa	-0x10(%r11),$T4		# s4^4
-+	vpaddq		$T1,$D4,$D4		# d4 += h1*r3
-+	vpmuludq	$H0,$T2,$T2		# h0*r3
-+	vpmuludq	$H4,$T3,$T0		# h4*s3
-+	vpaddq		$T2,$D3,$D3		# d3 += h0*r3
-+	vpaddq		$T0,$D2,$D2		# d2 += h4*s3
-+	 vmovdqu	16*2($inp),$T0				# load input
-+	vpmuludq	$H3,$T3,$T2		# h3*s3
-+	vpmuludq	$H2,$T3,$T3		# h2*s3
-+	vpaddq		$T2,$D1,$D1		# d1 += h3*s3
-+	 vmovdqu	16*3($inp),$T1				#
-+	vpaddq		$T3,$D0,$D0		# d0 += h2*s3
-+
-+	vpmuludq	$H2,$T4,$H2		# h2*s4
-+	vpmuludq	$H3,$T4,$H3		# h3*s4
-+	 vpsrldq	\$6,$T0,$T2				# splat input
-+	vpaddq		$H2,$D1,$D1		# d1 += h2*s4
-+	vpmuludq	$H4,$T4,$H4		# h4*s4
-+	 vpsrldq	\$6,$T1,$T3				#
-+	vpaddq		$H3,$D2,$H2		# h2 = d2 + h3*s4
-+	vpaddq		$H4,$D3,$H3		# h3 = d3 + h4*s4
-+	vpmuludq	-0x20(%r11),$H0,$H4	# h0*r4
-+	vpmuludq	$H1,$T4,$H0
-+	 vpunpckhqdq	$T1,$T0,$T4		# 4
-+	vpaddq		$H4,$D4,$H4		# h4 = d4 + h0*r4
-+	vpaddq		$H0,$D0,$H0		# h0 = d0 + h1*s4
-+
-+	vpunpcklqdq	$T1,$T0,$T0		# 0:1
-+	vpunpcklqdq	$T3,$T2,$T3		# 2:3
-+
-+	#vpsrlq		\$40,$T4,$T4		# 4
-+	vpsrldq		\$`40/8`,$T4,$T4	# 4
-+	vpsrlq		\$26,$T0,$T1
-+	 vmovdqa	0x00(%rsp),$D4		# preload r0^2
-+	vpand		$MASK,$T0,$T0		# 0
-+	vpsrlq		\$4,$T3,$T2
-+	vpand		$MASK,$T1,$T1		# 1
-+	vpand		0(%rcx),$T4,$T4		# .Lmask24
-+	vpsrlq		\$30,$T3,$T3
-+	vpand		$MASK,$T2,$T2		# 2
-+	vpand		$MASK,$T3,$T3		# 3
-+	vpor		32(%rcx),$T4,$T4	# padbit, yes, always
-+
-+	################################################################
-+	# lazy reduction as discussed in "NEON crypto" by D.J. Bernstein
-+	# and P. Schwabe
-+
-+	vpsrlq		\$26,$H3,$D3
-+	vpand		$MASK,$H3,$H3
-+	vpaddq		$D3,$H4,$H4		# h3 -> h4
-+
-+	vpsrlq		\$26,$H0,$D0
-+	vpand		$MASK,$H0,$H0
-+	vpaddq		$D0,$D1,$H1		# h0 -> h1
-+
-+	vpsrlq		\$26,$H4,$D0
-+	vpand		$MASK,$H4,$H4
-+
-+	vpsrlq		\$26,$H1,$D1
-+	vpand		$MASK,$H1,$H1
-+	vpaddq		$D1,$H2,$H2		# h1 -> h2
-+
-+	vpaddq		$D0,$H0,$H0
-+	vpsllq		\$2,$D0,$D0
-+	vpaddq		$D0,$H0,$H0		# h4 -> h0
-+
-+	vpsrlq		\$26,$H2,$D2
-+	vpand		$MASK,$H2,$H2
-+	vpaddq		$D2,$H3,$H3		# h2 -> h3
-+
-+	vpsrlq		\$26,$H0,$D0
-+	vpand		$MASK,$H0,$H0
-+	vpaddq		$D0,$H1,$H1		# h0 -> h1
-+
-+	vpsrlq		\$26,$H3,$D3
-+	vpand		$MASK,$H3,$H3
-+	vpaddq		$D3,$H4,$H4		# h3 -> h4
-+
-+	ja		.Loop_avx
-+
-+.Lskip_loop_avx:
-+	################################################################
-+	# multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1
-+
-+	vpshufd		\$0x10,$D4,$D4		# r0^n, xx12 -> x1x2
-+	add		\$32,$len
-+	jnz		.Long_tail_avx
-+
-+	vpaddq		$H2,$T2,$T2
-+	vpaddq		$H0,$T0,$T0
-+	vpaddq		$H1,$T1,$T1
-+	vpaddq		$H3,$T3,$T3
-+	vpaddq		$H4,$T4,$T4
-+
-+.Long_tail_avx:
-+	vmovdqa		$H2,0x20(%r11)
-+	vmovdqa		$H0,0x00(%r11)
-+	vmovdqa		$H1,0x10(%r11)
-+	vmovdqa		$H3,0x30(%r11)
-+	vmovdqa		$H4,0x40(%r11)
-+
-+	# d4 = h4*r0 + h3*r1   + h2*r2   + h1*r3   + h0*r4
-+	# d3 = h3*r0 + h2*r1   + h1*r2   + h0*r3   + h4*5*r4
-+	# d2 = h2*r0 + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-+	# d1 = h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3 + h2*5*r4
-+	# d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
-+
-+	vpmuludq	$T2,$D4,$D2		# d2 = h2*r0
-+	vpmuludq	$T0,$D4,$D0		# d0 = h0*r0
-+	 vpshufd	\$0x10,`16*1-64`($ctx),$H2		# r1^n
-+	vpmuludq	$T1,$D4,$D1		# d1 = h1*r0
-+	vpmuludq	$T3,$D4,$D3		# d3 = h3*r0
-+	vpmuludq	$T4,$D4,$D4		# d4 = h4*r0
-+
-+	vpmuludq	$T3,$H2,$H0		# h3*r1
-+	vpaddq		$H0,$D4,$D4		# d4 += h3*r1
-+	 vpshufd	\$0x10,`16*2-64`($ctx),$H3		# s1^n
-+	vpmuludq	$T2,$H2,$H1		# h2*r1
-+	vpaddq		$H1,$D3,$D3		# d3 += h2*r1
-+	 vpshufd	\$0x10,`16*3-64`($ctx),$H4		# r2^n
-+	vpmuludq	$T1,$H2,$H0		# h1*r1
-+	vpaddq		$H0,$D2,$D2		# d2 += h1*r1
-+	vpmuludq	$T0,$H2,$H2		# h0*r1
-+	vpaddq		$H2,$D1,$D1		# d1 += h0*r1
-+	vpmuludq	$T4,$H3,$H3		# h4*s1
-+	vpaddq		$H3,$D0,$D0		# d0 += h4*s1
-+
-+	 vpshufd	\$0x10,`16*4-64`($ctx),$H2		# s2^n
-+	vpmuludq	$T2,$H4,$H1		# h2*r2
-+	vpaddq		$H1,$D4,$D4		# d4 += h2*r2
-+	vpmuludq	$T1,$H4,$H0		# h1*r2
-+	vpaddq		$H0,$D3,$D3		# d3 += h1*r2
-+	 vpshufd	\$0x10,`16*5-64`($ctx),$H3		# r3^n
-+	vpmuludq	$T0,$H4,$H4		# h0*r2
-+	vpaddq		$H4,$D2,$D2		# d2 += h0*r2
-+	vpmuludq	$T4,$H2,$H1		# h4*s2
-+	vpaddq		$H1,$D1,$D1		# d1 += h4*s2
-+	 vpshufd	\$0x10,`16*6-64`($ctx),$H4		# s3^n
-+	vpmuludq	$T3,$H2,$H2		# h3*s2
-+	vpaddq		$H2,$D0,$D0		# d0 += h3*s2
-+
-+	vpmuludq	$T1,$H3,$H0		# h1*r3
-+	vpaddq		$H0,$D4,$D4		# d4 += h1*r3
-+	vpmuludq	$T0,$H3,$H3		# h0*r3
-+	vpaddq		$H3,$D3,$D3		# d3 += h0*r3
-+	 vpshufd	\$0x10,`16*7-64`($ctx),$H2		# r4^n
-+	vpmuludq	$T4,$H4,$H1		# h4*s3
-+	vpaddq		$H1,$D2,$D2		# d2 += h4*s3
-+	 vpshufd	\$0x10,`16*8-64`($ctx),$H3		# s4^n
-+	vpmuludq	$T3,$H4,$H0		# h3*s3
-+	vpaddq		$H0,$D1,$D1		# d1 += h3*s3
-+	vpmuludq	$T2,$H4,$H4		# h2*s3
-+	vpaddq		$H4,$D0,$D0		# d0 += h2*s3
-+
-+	vpmuludq	$T0,$H2,$H2		# h0*r4
-+	vpaddq		$H2,$D4,$D4		# h4 = d4 + h0*r4
-+	vpmuludq	$T4,$H3,$H1		# h4*s4
-+	vpaddq		$H1,$D3,$D3		# h3 = d3 + h4*s4
-+	vpmuludq	$T3,$H3,$H0		# h3*s4
-+	vpaddq		$H0,$D2,$D2		# h2 = d2 + h3*s4
-+	vpmuludq	$T2,$H3,$H1		# h2*s4
-+	vpaddq		$H1,$D1,$D1		# h1 = d1 + h2*s4
-+	vpmuludq	$T1,$H3,$H3		# h1*s4
-+	vpaddq		$H3,$D0,$D0		# h0 = d0 + h1*s4
-+
-+	jz		.Lshort_tail_avx
-+
-+	vmovdqu		16*0($inp),$H0		# load input
-+	vmovdqu		16*1($inp),$H1
-+
-+	vpsrldq		\$6,$H0,$H2		# splat input
-+	vpsrldq		\$6,$H1,$H3
-+	vpunpckhqdq	$H1,$H0,$H4		# 4
-+	vpunpcklqdq	$H1,$H0,$H0		# 0:1
-+	vpunpcklqdq	$H3,$H2,$H3		# 2:3
-+
-+	vpsrlq		\$40,$H4,$H4		# 4
-+	vpsrlq		\$26,$H0,$H1
-+	vpand		$MASK,$H0,$H0		# 0
-+	vpsrlq		\$4,$H3,$H2
-+	vpand		$MASK,$H1,$H1		# 1
-+	vpsrlq		\$30,$H3,$H3
-+	vpand		$MASK,$H2,$H2		# 2
-+	vpand		$MASK,$H3,$H3		# 3
-+	vpor		32(%rcx),$H4,$H4	# padbit, yes, always
-+
-+	vpshufd		\$0x32,`16*0-64`($ctx),$T4	# r0^n, 34xx -> x3x4
-+	vpaddq		0x00(%r11),$H0,$H0
-+	vpaddq		0x10(%r11),$H1,$H1
-+	vpaddq		0x20(%r11),$H2,$H2
-+	vpaddq		0x30(%r11),$H3,$H3
-+	vpaddq		0x40(%r11),$H4,$H4
-+
-+	################################################################
-+	# multiply (inp[0:1]+hash) by r^4:r^3 and accumulate
-+
-+	vpmuludq	$H0,$T4,$T0		# h0*r0
-+	vpaddq		$T0,$D0,$D0		# d0 += h0*r0
-+	vpmuludq	$H1,$T4,$T1		# h1*r0
-+	vpaddq		$T1,$D1,$D1		# d1 += h1*r0
-+	vpmuludq	$H2,$T4,$T0		# h2*r0
-+	vpaddq		$T0,$D2,$D2		# d2 += h2*r0
-+	 vpshufd	\$0x32,`16*1-64`($ctx),$T2		# r1^n
-+	vpmuludq	$H3,$T4,$T1		# h3*r0
-+	vpaddq		$T1,$D3,$D3		# d3 += h3*r0
-+	vpmuludq	$H4,$T4,$T4		# h4*r0
-+	vpaddq		$T4,$D4,$D4		# d4 += h4*r0
-+
-+	vpmuludq	$H3,$T2,$T0		# h3*r1
-+	vpaddq		$T0,$D4,$D4		# d4 += h3*r1
-+	 vpshufd	\$0x32,`16*2-64`($ctx),$T3		# s1
-+	vpmuludq	$H2,$T2,$T1		# h2*r1
-+	vpaddq		$T1,$D3,$D3		# d3 += h2*r1
-+	 vpshufd	\$0x32,`16*3-64`($ctx),$T4		# r2
-+	vpmuludq	$H1,$T2,$T0		# h1*r1
-+	vpaddq		$T0,$D2,$D2		# d2 += h1*r1
-+	vpmuludq	$H0,$T2,$T2		# h0*r1
-+	vpaddq		$T2,$D1,$D1		# d1 += h0*r1
-+	vpmuludq	$H4,$T3,$T3		# h4*s1
-+	vpaddq		$T3,$D0,$D0		# d0 += h4*s1
-+
-+	 vpshufd	\$0x32,`16*4-64`($ctx),$T2		# s2
-+	vpmuludq	$H2,$T4,$T1		# h2*r2
-+	vpaddq		$T1,$D4,$D4		# d4 += h2*r2
-+	vpmuludq	$H1,$T4,$T0		# h1*r2
-+	vpaddq		$T0,$D3,$D3		# d3 += h1*r2
-+	 vpshufd	\$0x32,`16*5-64`($ctx),$T3		# r3
-+	vpmuludq	$H0,$T4,$T4		# h0*r2
-+	vpaddq		$T4,$D2,$D2		# d2 += h0*r2
-+	vpmuludq	$H4,$T2,$T1		# h4*s2
-+	vpaddq		$T1,$D1,$D1		# d1 += h4*s2
-+	 vpshufd	\$0x32,`16*6-64`($ctx),$T4		# s3
-+	vpmuludq	$H3,$T2,$T2		# h3*s2
-+	vpaddq		$T2,$D0,$D0		# d0 += h3*s2
-+
-+	vpmuludq	$H1,$T3,$T0		# h1*r3
-+	vpaddq		$T0,$D4,$D4		# d4 += h1*r3
-+	vpmuludq	$H0,$T3,$T3		# h0*r3
-+	vpaddq		$T3,$D3,$D3		# d3 += h0*r3
-+	 vpshufd	\$0x32,`16*7-64`($ctx),$T2		# r4
-+	vpmuludq	$H4,$T4,$T1		# h4*s3
-+	vpaddq		$T1,$D2,$D2		# d2 += h4*s3
-+	 vpshufd	\$0x32,`16*8-64`($ctx),$T3		# s4
-+	vpmuludq	$H3,$T4,$T0		# h3*s3
-+	vpaddq		$T0,$D1,$D1		# d1 += h3*s3
-+	vpmuludq	$H2,$T4,$T4		# h2*s3
-+	vpaddq		$T4,$D0,$D0		# d0 += h2*s3
-+
-+	vpmuludq	$H0,$T2,$T2		# h0*r4
-+	vpaddq		$T2,$D4,$D4		# d4 += h0*r4
-+	vpmuludq	$H4,$T3,$T1		# h4*s4
-+	vpaddq		$T1,$D3,$D3		# d3 += h4*s4
-+	vpmuludq	$H3,$T3,$T0		# h3*s4
-+	vpaddq		$T0,$D2,$D2		# d2 += h3*s4
-+	vpmuludq	$H2,$T3,$T1		# h2*s4
-+	vpaddq		$T1,$D1,$D1		# d1 += h2*s4
-+	vpmuludq	$H1,$T3,$T3		# h1*s4
-+	vpaddq		$T3,$D0,$D0		# d0 += h1*s4
-+
-+.Lshort_tail_avx:
-+	################################################################
-+	# horizontal addition
-+
-+	vpsrldq		\$8,$D4,$T4
-+	vpsrldq		\$8,$D3,$T3
-+	vpsrldq		\$8,$D1,$T1
-+	vpsrldq		\$8,$D0,$T0
-+	vpsrldq		\$8,$D2,$T2
-+	vpaddq		$T3,$D3,$D3
-+	vpaddq		$T4,$D4,$D4
-+	vpaddq		$T0,$D0,$D0
-+	vpaddq		$T1,$D1,$D1
-+	vpaddq		$T2,$D2,$D2
-+
-+	################################################################
-+	# lazy reduction
-+
-+	vpsrlq		\$26,$D3,$H3
-+	vpand		$MASK,$D3,$D3
-+	vpaddq		$H3,$D4,$D4		# h3 -> h4
-+
-+	vpsrlq		\$26,$D0,$H0
-+	vpand		$MASK,$D0,$D0
-+	vpaddq		$H0,$D1,$D1		# h0 -> h1
-+
-+	vpsrlq		\$26,$D4,$H4
-+	vpand		$MASK,$D4,$D4
-+
-+	vpsrlq		\$26,$D1,$H1
-+	vpand		$MASK,$D1,$D1
-+	vpaddq		$H1,$D2,$D2		# h1 -> h2
-+
-+	vpaddq		$H4,$D0,$D0
-+	vpsllq		\$2,$H4,$H4
-+	vpaddq		$H4,$D0,$D0		# h4 -> h0
-+
-+	vpsrlq		\$26,$D2,$H2
-+	vpand		$MASK,$D2,$D2
-+	vpaddq		$H2,$D3,$D3		# h2 -> h3
-+
-+	vpsrlq		\$26,$D0,$H0
-+	vpand		$MASK,$D0,$D0
-+	vpaddq		$H0,$D1,$D1		# h0 -> h1
-+
-+	vpsrlq		\$26,$D3,$H3
-+	vpand		$MASK,$D3,$D3
-+	vpaddq		$H3,$D4,$D4		# h3 -> h4
-+
-+	vmovd		$D0,`4*0-48-64`($ctx)	# save partially reduced
-+	vmovd		$D1,`4*1-48-64`($ctx)
-+	vmovd		$D2,`4*2-48-64`($ctx)
-+	vmovd		$D3,`4*3-48-64`($ctx)
-+	vmovd		$D4,`4*4-48-64`($ctx)
-+___
-+$code.=<<___	if ($win64);
-+	vmovdqa		0x50(%r11),%xmm6
-+	vmovdqa		0x60(%r11),%xmm7
-+	vmovdqa		0x70(%r11),%xmm8
-+	vmovdqa		0x80(%r11),%xmm9
-+	vmovdqa		0x90(%r11),%xmm10
-+	vmovdqa		0xa0(%r11),%xmm11
-+	vmovdqa		0xb0(%r11),%xmm12
-+	vmovdqa		0xc0(%r11),%xmm13
-+	vmovdqa		0xd0(%r11),%xmm14
-+	vmovdqa		0xe0(%r11),%xmm15
-+	lea		0xf8(%r11),%rsp
-+.Ldo_avx_epilogue:
-+___
-+$code.=<<___	if (!$win64);
-+	lea		0x58(%r11),%rsp
-+.cfi_def_cfa		%rsp,8
-+___
-+$code.=<<___;
-+	vzeroupper
-+	ret
-+.cfi_endproc
-+.size	poly1305_blocks_avx,.-poly1305_blocks_avx
-+
-+.type	poly1305_emit_avx,\@function,3
-+.align	32
-+poly1305_emit_avx:
-+	cmpl	\$0,20($ctx)	# is_base2_26?
-+	je	.Lemit
-+
-+	mov	0($ctx),%eax	# load hash value base 2^26
-+	mov	4($ctx),%ecx
-+	mov	8($ctx),%r8d
-+	mov	12($ctx),%r11d
-+	mov	16($ctx),%r10d
-+
-+	shl	\$26,%rcx	# base 2^26 -> base 2^64
-+	mov	%r8,%r9
-+	shl	\$52,%r8
-+	add	%rcx,%rax
-+	shr	\$12,%r9
-+	add	%rax,%r8	# h0
-+	adc	\$0,%r9
-+
-+	shl	\$14,%r11
-+	mov	%r10,%rax
-+	shr	\$24,%r10
-+	add	%r11,%r9
-+	shl	\$40,%rax
-+	add	%rax,%r9	# h1
-+	adc	\$0,%r10	# h2
-+
-+	mov	%r10,%rax	# could be partially reduced, so reduce
-+	mov	%r10,%rcx
-+	and	\$3,%r10
-+	shr	\$2,%rax
-+	and	\$-4,%rcx
-+	add	%rcx,%rax
-+	add	%rax,%r8
-+	adc	\$0,%r9
-+	adc	\$0,%r10
-+
-+	mov	%r8,%rax
-+	add	\$5,%r8		# compare to modulus
-+	mov	%r9,%rcx
-+	adc	\$0,%r9
-+	adc	\$0,%r10
-+	shr	\$2,%r10	# did 130-bit value overflow?
-+	cmovnz	%r8,%rax
-+	cmovnz	%r9,%rcx
-+
-+	add	0($nonce),%rax	# accumulate nonce
-+	adc	8($nonce),%rcx
-+	mov	%rax,0($mac)	# write result
-+	mov	%rcx,8($mac)
-+
-+	ret
-+.size	poly1305_emit_avx,.-poly1305_emit_avx
-+___
-+
-+if ($avx>1) {
-+my ($H0,$H1,$H2,$H3,$H4, $MASK, $T4,$T0,$T1,$T2,$T3, $D0,$D1,$D2,$D3,$D4) =
-+    map("%ymm$_",(0..15));
-+my $S4=$MASK;
-+
-+$code.=<<___;
-+.type	poly1305_blocks_avx2,\@function,4
-+.align	32
-+poly1305_blocks_avx2:
-+.cfi_startproc
-+	mov	20($ctx),%r8d		# is_base2_26
-+	cmp	\$128,$len
-+	jae	.Lblocks_avx2
-+	test	%r8d,%r8d
-+	jz	.Lblocks
-+
-+.Lblocks_avx2:
-+	and	\$-16,$len
-+	jz	.Lno_data_avx2
-+
-+	vzeroupper
-+
-+	test	%r8d,%r8d
-+	jz	.Lbase2_64_avx2
-+
-+	test	\$63,$len
-+	jz	.Leven_avx2
-+
-+	push	%rbx
-+.cfi_push	%rbx
-+	push	%rbp
-+.cfi_push	%rbp
-+	push	%r12
-+.cfi_push	%r12
-+	push	%r13
-+.cfi_push	%r13
-+	push	%r14
-+.cfi_push	%r14
-+	push	%r15
-+.cfi_push	%r15
-+.Lblocks_avx2_body:
-+
-+	mov	$len,%r15		# reassign $len
-+
-+	mov	0($ctx),$d1		# load hash value
-+	mov	8($ctx),$d2
-+	mov	16($ctx),$h2#d
-+
-+	mov	24($ctx),$r0		# load r
-+	mov	32($ctx),$s1
-+
-+	################################# base 2^26 -> base 2^64
-+	mov	$d1#d,$h0#d
-+	and	\$`-1*(1<<31)`,$d1
-+	mov	$d2,$r1			# borrow $r1
-+	mov	$d2#d,$h1#d
-+	and	\$`-1*(1<<31)`,$d2
-+
-+	shr	\$6,$d1
-+	shl	\$52,$r1
-+	add	$d1,$h0
-+	shr	\$12,$h1
-+	shr	\$18,$d2
-+	add	$r1,$h0
-+	adc	$d2,$h1
-+
-+	mov	$h2,$d1
-+	shl	\$40,$d1
-+	shr	\$24,$h2
-+	add	$d1,$h1
-+	adc	\$0,$h2			# can be partially reduced...
-+
-+	mov	\$-4,$d2		# ... so reduce
-+	mov	$h2,$d1
-+	and	$h2,$d2
-+	shr	\$2,$d1
-+	and	\$3,$h2
-+	add	$d2,$d1			# =*5
-+	add	$d1,$h0
-+	adc	\$0,$h1
-+	adc	\$0,$h2
-+
-+	mov	$s1,$r1
-+	mov	$s1,%rax
-+	shr	\$2,$s1
-+	add	$r1,$s1			# s1 = r1 + (r1 >> 2)
-+
-+.Lbase2_26_pre_avx2:
-+	add	0($inp),$h0		# accumulate input
-+	adc	8($inp),$h1
-+	lea	16($inp),$inp
-+	adc	$padbit,$h2
-+	sub	\$16,%r15
-+
-+	call	__poly1305_block
-+	mov	$r1,%rax
-+
-+	test	\$63,%r15
-+	jnz	.Lbase2_26_pre_avx2
-+
-+	test	$padbit,$padbit		# if $padbit is zero,
-+	jz	.Lstore_base2_64_avx2	# store hash in base 2^64 format
-+
-+	################################# base 2^64 -> base 2^26
-+	mov	$h0,%rax
-+	mov	$h0,%rdx
-+	shr	\$52,$h0
-+	mov	$h1,$r0
-+	mov	$h1,$r1
-+	shr	\$26,%rdx
-+	and	\$0x3ffffff,%rax	# h[0]
-+	shl	\$12,$r0
-+	and	\$0x3ffffff,%rdx	# h[1]
-+	shr	\$14,$h1
-+	or	$r0,$h0
-+	shl	\$24,$h2
-+	and	\$0x3ffffff,$h0		# h[2]
-+	shr	\$40,$r1
-+	and	\$0x3ffffff,$h1		# h[3]
-+	or	$r1,$h2			# h[4]
-+
-+	test	%r15,%r15
-+	jz	.Lstore_base2_26_avx2
-+
-+	vmovd	%rax#d,%x#$H0
-+	vmovd	%rdx#d,%x#$H1
-+	vmovd	$h0#d,%x#$H2
-+	vmovd	$h1#d,%x#$H3
-+	vmovd	$h2#d,%x#$H4
-+	jmp	.Lproceed_avx2
-+
-+.align	32
-+.Lstore_base2_64_avx2:
-+	mov	$h0,0($ctx)
-+	mov	$h1,8($ctx)
-+	mov	$h2,16($ctx)		# note that is_base2_26 is zeroed
-+	jmp	.Ldone_avx2
-+
-+.align	16
-+.Lstore_base2_26_avx2:
-+	mov	%rax#d,0($ctx)		# store hash value base 2^26
-+	mov	%rdx#d,4($ctx)
-+	mov	$h0#d,8($ctx)
-+	mov	$h1#d,12($ctx)
-+	mov	$h2#d,16($ctx)
-+.align	16
-+.Ldone_avx2:
-+	mov	0(%rsp),%r15
-+.cfi_restore	%r15
-+	mov	8(%rsp),%r14
-+.cfi_restore	%r14
-+	mov	16(%rsp),%r13
-+.cfi_restore	%r13
-+	mov	24(%rsp),%r12
-+.cfi_restore	%r12
-+	mov	32(%rsp),%rbp
-+.cfi_restore	%rbp
-+	mov	40(%rsp),%rbx
-+.cfi_restore	%rbx
-+	lea	48(%rsp),%rsp
-+.cfi_adjust_cfa_offset	-48
-+.Lno_data_avx2:
-+.Lblocks_avx2_epilogue:
-+	ret
-+.cfi_endproc
-+
-+.align	32
-+.Lbase2_64_avx2:
-+.cfi_startproc
-+	push	%rbx
-+.cfi_push	%rbx
-+	push	%rbp
-+.cfi_push	%rbp
-+	push	%r12
-+.cfi_push	%r12
-+	push	%r13
-+.cfi_push	%r13
-+	push	%r14
-+.cfi_push	%r14
-+	push	%r15
-+.cfi_push	%r15
-+.Lbase2_64_avx2_body:
-+
-+	mov	$len,%r15		# reassign $len
-+
-+	mov	24($ctx),$r0		# load r
-+	mov	32($ctx),$s1
-+
-+	mov	0($ctx),$h0		# load hash value
-+	mov	8($ctx),$h1
-+	mov	16($ctx),$h2#d
-+
-+	mov	$s1,$r1
-+	mov	$s1,%rax
-+	shr	\$2,$s1
-+	add	$r1,$s1			# s1 = r1 + (r1 >> 2)
-+
-+	test	\$63,$len
-+	jz	.Linit_avx2
-+
-+.Lbase2_64_pre_avx2:
-+	add	0($inp),$h0		# accumulate input
-+	adc	8($inp),$h1
-+	lea	16($inp),$inp
-+	adc	$padbit,$h2
-+	sub	\$16,%r15
-+
-+	call	__poly1305_block
-+	mov	$r1,%rax
-+
-+	test	\$63,%r15
-+	jnz	.Lbase2_64_pre_avx2
-+
-+.Linit_avx2:
-+	################################# base 2^64 -> base 2^26
-+	mov	$h0,%rax
-+	mov	$h0,%rdx
-+	shr	\$52,$h0
-+	mov	$h1,$d1
-+	mov	$h1,$d2
-+	shr	\$26,%rdx
-+	and	\$0x3ffffff,%rax	# h[0]
-+	shl	\$12,$d1
-+	and	\$0x3ffffff,%rdx	# h[1]
-+	shr	\$14,$h1
-+	or	$d1,$h0
-+	shl	\$24,$h2
-+	and	\$0x3ffffff,$h0		# h[2]
-+	shr	\$40,$d2
-+	and	\$0x3ffffff,$h1		# h[3]
-+	or	$d2,$h2			# h[4]
-+
-+	vmovd	%rax#d,%x#$H0
-+	vmovd	%rdx#d,%x#$H1
-+	vmovd	$h0#d,%x#$H2
-+	vmovd	$h1#d,%x#$H3
-+	vmovd	$h2#d,%x#$H4
-+	movl	\$1,20($ctx)		# set is_base2_26
-+
-+	call	__poly1305_init_avx
-+
-+.Lproceed_avx2:
-+	mov	%r15,$len			# restore $len
-+	mov	OPENSSL_ia32cap_P+8(%rip),%r10d
-+	mov	\$`(1<<31|1<<30|1<<16)`,%r11d
-+
-+	mov	0(%rsp),%r15
-+.cfi_restore	%r15
-+	mov	8(%rsp),%r14
-+.cfi_restore	%r14
-+	mov	16(%rsp),%r13
-+.cfi_restore	%r13
-+	mov	24(%rsp),%r12
-+.cfi_restore	%r12
-+	mov	32(%rsp),%rbp
-+.cfi_restore	%rbp
-+	mov	40(%rsp),%rbx
-+.cfi_restore	%rbx
-+	lea	48(%rsp),%rax
-+	lea	48(%rsp),%rsp
-+.cfi_adjust_cfa_offset	-48
-+.Lbase2_64_avx2_epilogue:
-+	jmp	.Ldo_avx2
-+.cfi_endproc
-+
-+.align	32
-+.Leven_avx2:
-+.cfi_startproc
-+	mov		OPENSSL_ia32cap_P+8(%rip),%r10d
-+	vmovd		4*0($ctx),%x#$H0	# load hash value base 2^26
-+	vmovd		4*1($ctx),%x#$H1
-+	vmovd		4*2($ctx),%x#$H2
-+	vmovd		4*3($ctx),%x#$H3
-+	vmovd		4*4($ctx),%x#$H4
-+
-+.Ldo_avx2:
-+___
-+$code.=<<___		if ($avx>2);
-+	cmp		\$512,$len
-+	jb		.Lskip_avx512
-+	and		%r11d,%r10d
-+	test		\$`1<<16`,%r10d		# check for AVX512F
-+	jnz		.Lblocks_avx512
-+.Lskip_avx512:
-+___
-+$code.=<<___	if (!$win64);
-+	lea		-8(%rsp),%r11
-+.cfi_def_cfa		%r11,16
-+	sub		\$0x128,%rsp
-+___
-+$code.=<<___	if ($win64);
-+	lea		-0xf8(%rsp),%r11
-+	sub		\$0x1c8,%rsp
-+	vmovdqa		%xmm6,0x50(%r11)
-+	vmovdqa		%xmm7,0x60(%r11)
-+	vmovdqa		%xmm8,0x70(%r11)
-+	vmovdqa		%xmm9,0x80(%r11)
-+	vmovdqa		%xmm10,0x90(%r11)
-+	vmovdqa		%xmm11,0xa0(%r11)
-+	vmovdqa		%xmm12,0xb0(%r11)
-+	vmovdqa		%xmm13,0xc0(%r11)
-+	vmovdqa		%xmm14,0xd0(%r11)
-+	vmovdqa		%xmm15,0xe0(%r11)
-+.Ldo_avx2_body:
-+___
-+$code.=<<___;
-+	lea		.Lconst(%rip),%rcx
-+	lea		48+64($ctx),$ctx	# size optimization
-+	vmovdqa		96(%rcx),$T0		# .Lpermd_avx2
-+
-+	# expand and copy pre-calculated table to stack
-+	vmovdqu		`16*0-64`($ctx),%x#$T2
-+	and		\$-512,%rsp
-+	vmovdqu		`16*1-64`($ctx),%x#$T3
-+	vmovdqu		`16*2-64`($ctx),%x#$T4
-+	vmovdqu		`16*3-64`($ctx),%x#$D0
-+	vmovdqu		`16*4-64`($ctx),%x#$D1
-+	vmovdqu		`16*5-64`($ctx),%x#$D2
-+	lea		0x90(%rsp),%rax		# size optimization
-+	vmovdqu		`16*6-64`($ctx),%x#$D3
-+	vpermd		$T2,$T0,$T2		# 00003412 -> 14243444
-+	vmovdqu		`16*7-64`($ctx),%x#$D4
-+	vpermd		$T3,$T0,$T3
-+	vmovdqu		`16*8-64`($ctx),%x#$MASK
-+	vpermd		$T4,$T0,$T4
-+	vmovdqa		$T2,0x00(%rsp)
-+	vpermd		$D0,$T0,$D0
-+	vmovdqa		$T3,0x20-0x90(%rax)
-+	vpermd		$D1,$T0,$D1
-+	vmovdqa		$T4,0x40-0x90(%rax)
-+	vpermd		$D2,$T0,$D2
-+	vmovdqa		$D0,0x60-0x90(%rax)
-+	vpermd		$D3,$T0,$D3
-+	vmovdqa		$D1,0x80-0x90(%rax)
-+	vpermd		$D4,$T0,$D4
-+	vmovdqa		$D2,0xa0-0x90(%rax)
-+	vpermd		$MASK,$T0,$MASK
-+	vmovdqa		$D3,0xc0-0x90(%rax)
-+	vmovdqa		$D4,0xe0-0x90(%rax)
-+	vmovdqa		$MASK,0x100-0x90(%rax)
-+	vmovdqa		64(%rcx),$MASK		# .Lmask26
-+
-+	################################################################
-+	# load input
-+	vmovdqu		16*0($inp),%x#$T0
-+	vmovdqu		16*1($inp),%x#$T1
-+	vinserti128	\$1,16*2($inp),$T0,$T0
-+	vinserti128	\$1,16*3($inp),$T1,$T1
-+	lea		16*4($inp),$inp
-+
-+	vpsrldq		\$6,$T0,$T2		# splat input
-+	vpsrldq		\$6,$T1,$T3
-+	vpunpckhqdq	$T1,$T0,$T4		# 4
-+	vpunpcklqdq	$T3,$T2,$T2		# 2:3
-+	vpunpcklqdq	$T1,$T0,$T0		# 0:1
-+
-+	vpsrlq		\$30,$T2,$T3
-+	vpsrlq		\$4,$T2,$T2
-+	vpsrlq		\$26,$T0,$T1
-+	vpsrlq		\$40,$T4,$T4		# 4
-+	vpand		$MASK,$T2,$T2		# 2
-+	vpand		$MASK,$T0,$T0		# 0
-+	vpand		$MASK,$T1,$T1		# 1
-+	vpand		$MASK,$T3,$T3		# 3
-+	vpor		32(%rcx),$T4,$T4	# padbit, yes, always
-+
-+	vpaddq		$H2,$T2,$H2		# accumulate input
-+	sub		\$64,$len
-+	jz		.Ltail_avx2
-+	jmp		.Loop_avx2
-+
-+.align	32
-+.Loop_avx2:
-+	################################################################
-+	# ((inp[0]*r^4+inp[4])*r^4+inp[ 8])*r^4
-+	# ((inp[1]*r^4+inp[5])*r^4+inp[ 9])*r^3
-+	# ((inp[2]*r^4+inp[6])*r^4+inp[10])*r^2
-+	# ((inp[3]*r^4+inp[7])*r^4+inp[11])*r^1
-+	#   \________/\__________/
-+	################################################################
-+	#vpaddq		$H2,$T2,$H2		# accumulate input
-+	vpaddq		$H0,$T0,$H0
-+	vmovdqa		`32*0`(%rsp),$T0	# r0^4
-+	vpaddq		$H1,$T1,$H1
-+	vmovdqa		`32*1`(%rsp),$T1	# r1^4
-+	vpaddq		$H3,$T3,$H3
-+	vmovdqa		`32*3`(%rsp),$T2	# r2^4
-+	vpaddq		$H4,$T4,$H4
-+	vmovdqa		`32*6-0x90`(%rax),$T3	# s3^4
-+	vmovdqa		`32*8-0x90`(%rax),$S4	# s4^4
-+
-+	# d4 = h4*r0 + h3*r1   + h2*r2   + h1*r3   + h0*r4
-+	# d3 = h3*r0 + h2*r1   + h1*r2   + h0*r3   + h4*5*r4
-+	# d2 = h2*r0 + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-+	# d1 = h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3 + h2*5*r4
-+	# d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
-+	#
-+	# however, as h2 is "chronologically" first one available pull
-+	# corresponding operations up, so it's
-+	#
-+	# d4 = h2*r2   + h4*r0 + h3*r1             + h1*r3   + h0*r4
-+	# d3 = h2*r1   + h3*r0           + h1*r2   + h0*r3   + h4*5*r4
-+	# d2 = h2*r0           + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-+	# d1 = h2*5*r4 + h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3
-+	# d0 = h2*5*r3 + h0*r0 + h4*5*r1 + h3*5*r2           + h1*5*r4
-+
-+	vpmuludq	$H2,$T0,$D2		# d2 = h2*r0
-+	vpmuludq	$H2,$T1,$D3		# d3 = h2*r1
-+	vpmuludq	$H2,$T2,$D4		# d4 = h2*r2
-+	vpmuludq	$H2,$T3,$D0		# d0 = h2*s3
-+	vpmuludq	$H2,$S4,$D1		# d1 = h2*s4
-+
-+	vpmuludq	$H0,$T1,$T4		# h0*r1
-+	vpmuludq	$H1,$T1,$H2		# h1*r1, borrow $H2 as temp
-+	vpaddq		$T4,$D1,$D1		# d1 += h0*r1
-+	vpaddq		$H2,$D2,$D2		# d2 += h1*r1
-+	vpmuludq	$H3,$T1,$T4		# h3*r1
-+	vpmuludq	`32*2`(%rsp),$H4,$H2	# h4*s1
-+	vpaddq		$T4,$D4,$D4		# d4 += h3*r1
-+	vpaddq		$H2,$D0,$D0		# d0 += h4*s1
-+	 vmovdqa	`32*4-0x90`(%rax),$T1	# s2
-+
-+	vpmuludq	$H0,$T0,$T4		# h0*r0
-+	vpmuludq	$H1,$T0,$H2		# h1*r0
-+	vpaddq		$T4,$D0,$D0		# d0 += h0*r0
-+	vpaddq		$H2,$D1,$D1		# d1 += h1*r0
-+	vpmuludq	$H3,$T0,$T4		# h3*r0
-+	vpmuludq	$H4,$T0,$H2		# h4*r0
-+	 vmovdqu	16*0($inp),%x#$T0	# load input
-+	vpaddq		$T4,$D3,$D3		# d3 += h3*r0
-+	vpaddq		$H2,$D4,$D4		# d4 += h4*r0
-+	 vinserti128	\$1,16*2($inp),$T0,$T0
-+
-+	vpmuludq	$H3,$T1,$T4		# h3*s2
-+	vpmuludq	$H4,$T1,$H2		# h4*s2
-+	 vmovdqu	16*1($inp),%x#$T1
-+	vpaddq		$T4,$D0,$D0		# d0 += h3*s2
-+	vpaddq		$H2,$D1,$D1		# d1 += h4*s2
-+	 vmovdqa	`32*5-0x90`(%rax),$H2	# r3
-+	vpmuludq	$H1,$T2,$T4		# h1*r2
-+	vpmuludq	$H0,$T2,$T2		# h0*r2
-+	vpaddq		$T4,$D3,$D3		# d3 += h1*r2
-+	vpaddq		$T2,$D2,$D2		# d2 += h0*r2
-+	 vinserti128	\$1,16*3($inp),$T1,$T1
-+	 lea		16*4($inp),$inp
-+
-+	vpmuludq	$H1,$H2,$T4		# h1*r3
-+	vpmuludq	$H0,$H2,$H2		# h0*r3
-+	 vpsrldq	\$6,$T0,$T2		# splat input
-+	vpaddq		$T4,$D4,$D4		# d4 += h1*r3
-+	vpaddq		$H2,$D3,$D3		# d3 += h0*r3
-+	vpmuludq	$H3,$T3,$T4		# h3*s3
-+	vpmuludq	$H4,$T3,$H2		# h4*s3
-+	 vpsrldq	\$6,$T1,$T3
-+	vpaddq		$T4,$D1,$D1		# d1 += h3*s3
-+	vpaddq		$H2,$D2,$D2		# d2 += h4*s3
-+	 vpunpckhqdq	$T1,$T0,$T4		# 4
-+
-+	vpmuludq	$H3,$S4,$H3		# h3*s4
-+	vpmuludq	$H4,$S4,$H4		# h4*s4
-+	 vpunpcklqdq	$T1,$T0,$T0		# 0:1
-+	vpaddq		$H3,$D2,$H2		# h2 = d2 + h3*r4
-+	vpaddq		$H4,$D3,$H3		# h3 = d3 + h4*r4
-+	 vpunpcklqdq	$T3,$T2,$T3		# 2:3
-+	vpmuludq	`32*7-0x90`(%rax),$H0,$H4	# h0*r4
-+	vpmuludq	$H1,$S4,$H0		# h1*s4
-+	vmovdqa		64(%rcx),$MASK		# .Lmask26
-+	vpaddq		$H4,$D4,$H4		# h4 = d4 + h0*r4
-+	vpaddq		$H0,$D0,$H0		# h0 = d0 + h1*s4
-+
-+	################################################################
-+	# lazy reduction (interleaved with tail of input splat)
-+
-+	vpsrlq		\$26,$H3,$D3
-+	vpand		$MASK,$H3,$H3
-+	vpaddq		$D3,$H4,$H4		# h3 -> h4
-+
-+	vpsrlq		\$26,$H0,$D0
-+	vpand		$MASK,$H0,$H0
-+	vpaddq		$D0,$D1,$H1		# h0 -> h1
-+
-+	vpsrlq		\$26,$H4,$D4
-+	vpand		$MASK,$H4,$H4
-+
-+	 vpsrlq		\$4,$T3,$T2
-+
-+	vpsrlq		\$26,$H1,$D1
-+	vpand		$MASK,$H1,$H1
-+	vpaddq		$D1,$H2,$H2		# h1 -> h2
-+
-+	vpaddq		$D4,$H0,$H0
-+	vpsllq		\$2,$D4,$D4
-+	vpaddq		$D4,$H0,$H0		# h4 -> h0
-+
-+	 vpand		$MASK,$T2,$T2		# 2
-+	 vpsrlq		\$26,$T0,$T1
-+
-+	vpsrlq		\$26,$H2,$D2
-+	vpand		$MASK,$H2,$H2
-+	vpaddq		$D2,$H3,$H3		# h2 -> h3
-+
-+	 vpaddq		$T2,$H2,$H2		# modulo-scheduled
-+	 vpsrlq		\$30,$T3,$T3
-+
-+	vpsrlq		\$26,$H0,$D0
-+	vpand		$MASK,$H0,$H0
-+	vpaddq		$D0,$H1,$H1		# h0 -> h1
-+
-+	 vpsrlq		\$40,$T4,$T4		# 4
-+
-+	vpsrlq		\$26,$H3,$D3
-+	vpand		$MASK,$H3,$H3
-+	vpaddq		$D3,$H4,$H4		# h3 -> h4
-+
-+	 vpand		$MASK,$T0,$T0		# 0
-+	 vpand		$MASK,$T1,$T1		# 1
-+	 vpand		$MASK,$T3,$T3		# 3
-+	 vpor		32(%rcx),$T4,$T4	# padbit, yes, always
-+
-+	sub		\$64,$len
-+	jnz		.Loop_avx2
-+
-+	.byte		0x66,0x90
-+.Ltail_avx2:
-+	################################################################
-+	# while above multiplications were by r^4 in all lanes, in last
-+	# iteration we multiply least significant lane by r^4 and most
-+	# significant one by r, so copy of above except that references
-+	# to the precomputed table are displaced by 4...
-+
-+	#vpaddq		$H2,$T2,$H2		# accumulate input
-+	vpaddq		$H0,$T0,$H0
-+	vmovdqu		`32*0+4`(%rsp),$T0	# r0^4
-+	vpaddq		$H1,$T1,$H1
-+	vmovdqu		`32*1+4`(%rsp),$T1	# r1^4
-+	vpaddq		$H3,$T3,$H3
-+	vmovdqu		`32*3+4`(%rsp),$T2	# r2^4
-+	vpaddq		$H4,$T4,$H4
-+	vmovdqu		`32*6+4-0x90`(%rax),$T3	# s3^4
-+	vmovdqu		`32*8+4-0x90`(%rax),$S4	# s4^4
-+
-+	vpmuludq	$H2,$T0,$D2		# d2 = h2*r0
-+	vpmuludq	$H2,$T1,$D3		# d3 = h2*r1
-+	vpmuludq	$H2,$T2,$D4		# d4 = h2*r2
-+	vpmuludq	$H2,$T3,$D0		# d0 = h2*s3
-+	vpmuludq	$H2,$S4,$D1		# d1 = h2*s4
-+
-+	vpmuludq	$H0,$T1,$T4		# h0*r1
-+	vpmuludq	$H1,$T1,$H2		# h1*r1
-+	vpaddq		$T4,$D1,$D1		# d1 += h0*r1
-+	vpaddq		$H2,$D2,$D2		# d2 += h1*r1
-+	vpmuludq	$H3,$T1,$T4		# h3*r1
-+	vpmuludq	`32*2+4`(%rsp),$H4,$H2	# h4*s1
-+	vpaddq		$T4,$D4,$D4		# d4 += h3*r1
-+	vpaddq		$H2,$D0,$D0		# d0 += h4*s1
-+
-+	vpmuludq	$H0,$T0,$T4		# h0*r0
-+	vpmuludq	$H1,$T0,$H2		# h1*r0
-+	vpaddq		$T4,$D0,$D0		# d0 += h0*r0
-+	 vmovdqu	`32*4+4-0x90`(%rax),$T1	# s2
-+	vpaddq		$H2,$D1,$D1		# d1 += h1*r0
-+	vpmuludq	$H3,$T0,$T4		# h3*r0
-+	vpmuludq	$H4,$T0,$H2		# h4*r0
-+	vpaddq		$T4,$D3,$D3		# d3 += h3*r0
-+	vpaddq		$H2,$D4,$D4		# d4 += h4*r0
-+
-+	vpmuludq	$H3,$T1,$T4		# h3*s2
-+	vpmuludq	$H4,$T1,$H2		# h4*s2
-+	vpaddq		$T4,$D0,$D0		# d0 += h3*s2
-+	vpaddq		$H2,$D1,$D1		# d1 += h4*s2
-+	 vmovdqu	`32*5+4-0x90`(%rax),$H2	# r3
-+	vpmuludq	$H1,$T2,$T4		# h1*r2
-+	vpmuludq	$H0,$T2,$T2		# h0*r2
-+	vpaddq		$T4,$D3,$D3		# d3 += h1*r2
-+	vpaddq		$T2,$D2,$D2		# d2 += h0*r2
-+
-+	vpmuludq	$H1,$H2,$T4		# h1*r3
-+	vpmuludq	$H0,$H2,$H2		# h0*r3
-+	vpaddq		$T4,$D4,$D4		# d4 += h1*r3
-+	vpaddq		$H2,$D3,$D3		# d3 += h0*r3
-+	vpmuludq	$H3,$T3,$T4		# h3*s3
-+	vpmuludq	$H4,$T3,$H2		# h4*s3
-+	vpaddq		$T4,$D1,$D1		# d1 += h3*s3
-+	vpaddq		$H2,$D2,$D2		# d2 += h4*s3
-+
-+	vpmuludq	$H3,$S4,$H3		# h3*s4
-+	vpmuludq	$H4,$S4,$H4		# h4*s4
-+	vpaddq		$H3,$D2,$H2		# h2 = d2 + h3*r4
-+	vpaddq		$H4,$D3,$H3		# h3 = d3 + h4*r4
-+	vpmuludq	`32*7+4-0x90`(%rax),$H0,$H4		# h0*r4
-+	vpmuludq	$H1,$S4,$H0		# h1*s4
-+	vmovdqa		64(%rcx),$MASK		# .Lmask26
-+	vpaddq		$H4,$D4,$H4		# h4 = d4 + h0*r4
-+	vpaddq		$H0,$D0,$H0		# h0 = d0 + h1*s4
-+
-+	################################################################
-+	# horizontal addition
-+
-+	vpsrldq		\$8,$D1,$T1
-+	vpsrldq		\$8,$H2,$T2
-+	vpsrldq		\$8,$H3,$T3
-+	vpsrldq		\$8,$H4,$T4
-+	vpsrldq		\$8,$H0,$T0
-+	vpaddq		$T1,$D1,$D1
-+	vpaddq		$T2,$H2,$H2
-+	vpaddq		$T3,$H3,$H3
-+	vpaddq		$T4,$H4,$H4
-+	vpaddq		$T0,$H0,$H0
-+
-+	vpermq		\$0x2,$H3,$T3
-+	vpermq		\$0x2,$H4,$T4
-+	vpermq		\$0x2,$H0,$T0
-+	vpermq		\$0x2,$D1,$T1
-+	vpermq		\$0x2,$H2,$T2
-+	vpaddq		$T3,$H3,$H3
-+	vpaddq		$T4,$H4,$H4
-+	vpaddq		$T0,$H0,$H0
-+	vpaddq		$T1,$D1,$D1
-+	vpaddq		$T2,$H2,$H2
-+
-+	################################################################
-+	# lazy reduction
-+
-+	vpsrlq		\$26,$H3,$D3
-+	vpand		$MASK,$H3,$H3
-+	vpaddq		$D3,$H4,$H4		# h3 -> h4
-+
-+	vpsrlq		\$26,$H0,$D0
-+	vpand		$MASK,$H0,$H0
-+	vpaddq		$D0,$D1,$H1		# h0 -> h1
-+
-+	vpsrlq		\$26,$H4,$D4
-+	vpand		$MASK,$H4,$H4
-+
-+	vpsrlq		\$26,$H1,$D1
-+	vpand		$MASK,$H1,$H1
-+	vpaddq		$D1,$H2,$H2		# h1 -> h2
-+
-+	vpaddq		$D4,$H0,$H0
-+	vpsllq		\$2,$D4,$D4
-+	vpaddq		$D4,$H0,$H0		# h4 -> h0
-+
-+	vpsrlq		\$26,$H2,$D2
-+	vpand		$MASK,$H2,$H2
-+	vpaddq		$D2,$H3,$H3		# h2 -> h3
-+
-+	vpsrlq		\$26,$H0,$D0
-+	vpand		$MASK,$H0,$H0
-+	vpaddq		$D0,$H1,$H1		# h0 -> h1
-+
-+	vpsrlq		\$26,$H3,$D3
-+	vpand		$MASK,$H3,$H3
-+	vpaddq		$D3,$H4,$H4		# h3 -> h4
-+
-+	vmovd		%x#$H0,`4*0-48-64`($ctx)# save partially reduced
-+	vmovd		%x#$H1,`4*1-48-64`($ctx)
-+	vmovd		%x#$H2,`4*2-48-64`($ctx)
-+	vmovd		%x#$H3,`4*3-48-64`($ctx)
-+	vmovd		%x#$H4,`4*4-48-64`($ctx)
-+___
-+$code.=<<___	if ($win64);
-+	vmovdqa		0x50(%r11),%xmm6
-+	vmovdqa		0x60(%r11),%xmm7
-+	vmovdqa		0x70(%r11),%xmm8
-+	vmovdqa		0x80(%r11),%xmm9
-+	vmovdqa		0x90(%r11),%xmm10
-+	vmovdqa		0xa0(%r11),%xmm11
-+	vmovdqa		0xb0(%r11),%xmm12
-+	vmovdqa		0xc0(%r11),%xmm13
-+	vmovdqa		0xd0(%r11),%xmm14
-+	vmovdqa		0xe0(%r11),%xmm15
-+	lea		0xf8(%r11),%rsp
-+.Ldo_avx2_epilogue:
-+___
-+$code.=<<___	if (!$win64);
-+	lea		8(%r11),%rsp
-+.cfi_def_cfa		%rsp,8
-+___
-+$code.=<<___;
-+	vzeroupper
-+	ret
-+.cfi_endproc
-+.size	poly1305_blocks_avx2,.-poly1305_blocks_avx2
-+___
-+#######################################################################
-+if ($avx>2) {
-+# On entry we have input length divisible by 64. But since inner loop
-+# processes 128 bytes per iteration, cases when length is not divisible
-+# by 128 are handled by passing tail 64 bytes to .Ltail_avx2. For this
-+# reason stack layout is kept identical to poly1305_blocks_avx2. If not
-+# for this tail, we wouldn't have to even allocate stack frame...
-+
-+my ($R0,$R1,$R2,$R3,$R4, $S1,$S2,$S3,$S4) = map("%zmm$_",(16..24));
-+my ($M0,$M1,$M2,$M3,$M4) = map("%zmm$_",(25..29));
-+my $PADBIT="%zmm30";
-+
-+map(s/%y/%z/,($T4,$T0,$T1,$T2,$T3));		# switch to %zmm domain
-+map(s/%y/%z/,($D0,$D1,$D2,$D3,$D4));
-+map(s/%y/%z/,($H0,$H1,$H2,$H3,$H4));
-+map(s/%y/%z/,($MASK));
-+
-+$code.=<<___;
-+.type	poly1305_blocks_avx512,\@function,4
-+.align	32
-+poly1305_blocks_avx512:
-+.cfi_startproc
-+.Lblocks_avx512:
-+	mov		\$15,%eax
-+	kmovw		%eax,%k2
-+___
-+$code.=<<___	if (!$win64);
-+	lea		-8(%rsp),%r11
-+.cfi_def_cfa		%r11,16
-+	sub		\$0x128,%rsp
-+___
-+$code.=<<___	if ($win64);
-+	lea		-0xf8(%rsp),%r11
-+	sub		\$0x1c8,%rsp
-+	vmovdqa		%xmm6,0x50(%r11)
-+	vmovdqa		%xmm7,0x60(%r11)
-+	vmovdqa		%xmm8,0x70(%r11)
-+	vmovdqa		%xmm9,0x80(%r11)
-+	vmovdqa		%xmm10,0x90(%r11)
-+	vmovdqa		%xmm11,0xa0(%r11)
-+	vmovdqa		%xmm12,0xb0(%r11)
-+	vmovdqa		%xmm13,0xc0(%r11)
-+	vmovdqa		%xmm14,0xd0(%r11)
-+	vmovdqa		%xmm15,0xe0(%r11)
-+.Ldo_avx512_body:
-+___
-+$code.=<<___;
-+	lea		.Lconst(%rip),%rcx
-+	lea		48+64($ctx),$ctx	# size optimization
-+	vmovdqa		96(%rcx),%y#$T2		# .Lpermd_avx2
-+
-+	# expand pre-calculated table
-+	vmovdqu		`16*0-64`($ctx),%x#$D0	# will become expanded ${R0}
-+	and		\$-512,%rsp
-+	vmovdqu		`16*1-64`($ctx),%x#$D1	# will become ... ${R1}
-+	mov		\$0x20,%rax
-+	vmovdqu		`16*2-64`($ctx),%x#$T0	# ... ${S1}
-+	vmovdqu		`16*3-64`($ctx),%x#$D2	# ... ${R2}
-+	vmovdqu		`16*4-64`($ctx),%x#$T1	# ... ${S2}
-+	vmovdqu		`16*5-64`($ctx),%x#$D3	# ... ${R3}
-+	vmovdqu		`16*6-64`($ctx),%x#$T3	# ... ${S3}
-+	vmovdqu		`16*7-64`($ctx),%x#$D4	# ... ${R4}
-+	vmovdqu		`16*8-64`($ctx),%x#$T4	# ... ${S4}
-+	vpermd		$D0,$T2,$R0		# 00003412 -> 14243444
-+	vpbroadcastq	64(%rcx),$MASK		# .Lmask26
-+	vpermd		$D1,$T2,$R1
-+	vpermd		$T0,$T2,$S1
-+	vpermd		$D2,$T2,$R2
-+	vmovdqa64	$R0,0x00(%rsp){%k2}	# save in case $len%128 != 0
-+	 vpsrlq		\$32,$R0,$T0		# 14243444 -> 01020304
-+	vpermd		$T1,$T2,$S2
-+	vmovdqu64	$R1,0x00(%rsp,%rax){%k2}
-+	 vpsrlq		\$32,$R1,$T1
-+	vpermd		$D3,$T2,$R3
-+	vmovdqa64	$S1,0x40(%rsp){%k2}
-+	vpermd		$T3,$T2,$S3
-+	vpermd		$D4,$T2,$R4
-+	vmovdqu64	$R2,0x40(%rsp,%rax){%k2}
-+	vpermd		$T4,$T2,$S4
-+	vmovdqa64	$S2,0x80(%rsp){%k2}
-+	vmovdqu64	$R3,0x80(%rsp,%rax){%k2}
-+	vmovdqa64	$S3,0xc0(%rsp){%k2}
-+	vmovdqu64	$R4,0xc0(%rsp,%rax){%k2}
-+	vmovdqa64	$S4,0x100(%rsp){%k2}
-+
-+	################################################################
-+	# calculate 5th through 8th powers of the key
-+	#
-+	# d0 = r0'*r0 + r1'*5*r4 + r2'*5*r3 + r3'*5*r2 + r4'*5*r1
-+	# d1 = r0'*r1 + r1'*r0   + r2'*5*r4 + r3'*5*r3 + r4'*5*r2
-+	# d2 = r0'*r2 + r1'*r1   + r2'*r0   + r3'*5*r4 + r4'*5*r3
-+	# d3 = r0'*r3 + r1'*r2   + r2'*r1   + r3'*r0   + r4'*5*r4
-+	# d4 = r0'*r4 + r1'*r3   + r2'*r2   + r3'*r1   + r4'*r0
-+
-+	vpmuludq	$T0,$R0,$D0		# d0 = r0'*r0
-+	vpmuludq	$T0,$R1,$D1		# d1 = r0'*r1
-+	vpmuludq	$T0,$R2,$D2		# d2 = r0'*r2
-+	vpmuludq	$T0,$R3,$D3		# d3 = r0'*r3
-+	vpmuludq	$T0,$R4,$D4		# d4 = r0'*r4
-+	 vpsrlq		\$32,$R2,$T2
-+
-+	vpmuludq	$T1,$S4,$M0
-+	vpmuludq	$T1,$R0,$M1
-+	vpmuludq	$T1,$R1,$M2
-+	vpmuludq	$T1,$R2,$M3
-+	vpmuludq	$T1,$R3,$M4
-+	 vpsrlq		\$32,$R3,$T3
-+	vpaddq		$M0,$D0,$D0		# d0 += r1'*5*r4
-+	vpaddq		$M1,$D1,$D1		# d1 += r1'*r0
-+	vpaddq		$M2,$D2,$D2		# d2 += r1'*r1
-+	vpaddq		$M3,$D3,$D3		# d3 += r1'*r2
-+	vpaddq		$M4,$D4,$D4		# d4 += r1'*r3
-+
-+	vpmuludq	$T2,$S3,$M0
-+	vpmuludq	$T2,$S4,$M1
-+	vpmuludq	$T2,$R1,$M3
-+	vpmuludq	$T2,$R2,$M4
-+	vpmuludq	$T2,$R0,$M2
-+	 vpsrlq		\$32,$R4,$T4
-+	vpaddq		$M0,$D0,$D0		# d0 += r2'*5*r3
-+	vpaddq		$M1,$D1,$D1		# d1 += r2'*5*r4
-+	vpaddq		$M3,$D3,$D3		# d3 += r2'*r1
-+	vpaddq		$M4,$D4,$D4		# d4 += r2'*r2
-+	vpaddq		$M2,$D2,$D2		# d2 += r2'*r0
-+
-+	vpmuludq	$T3,$S2,$M0
-+	vpmuludq	$T3,$R0,$M3
-+	vpmuludq	$T3,$R1,$M4
-+	vpmuludq	$T3,$S3,$M1
-+	vpmuludq	$T3,$S4,$M2
-+	vpaddq		$M0,$D0,$D0		# d0 += r3'*5*r2
-+	vpaddq		$M3,$D3,$D3		# d3 += r3'*r0
-+	vpaddq		$M4,$D4,$D4		# d4 += r3'*r1
-+	vpaddq		$M1,$D1,$D1		# d1 += r3'*5*r3
-+	vpaddq		$M2,$D2,$D2		# d2 += r3'*5*r4
-+
-+	vpmuludq	$T4,$S4,$M3
-+	vpmuludq	$T4,$R0,$M4
-+	vpmuludq	$T4,$S1,$M0
-+	vpmuludq	$T4,$S2,$M1
-+	vpmuludq	$T4,$S3,$M2
-+	vpaddq		$M3,$D3,$D3		# d3 += r2'*5*r4
-+	vpaddq		$M4,$D4,$D4		# d4 += r2'*r0
-+	vpaddq		$M0,$D0,$D0		# d0 += r2'*5*r1
-+	vpaddq		$M1,$D1,$D1		# d1 += r2'*5*r2
-+	vpaddq		$M2,$D2,$D2		# d2 += r2'*5*r3
-+
-+	################################################################
-+	# load input
-+	vmovdqu64	16*0($inp),%z#$T3
-+	vmovdqu64	16*4($inp),%z#$T4
-+	lea		16*8($inp),$inp
-+
-+	################################################################
-+	# lazy reduction
-+
-+	vpsrlq		\$26,$D3,$M3
-+	vpandq		$MASK,$D3,$D3
-+	vpaddq		$M3,$D4,$D4		# d3 -> d4
-+
-+	vpsrlq		\$26,$D0,$M0
-+	vpandq		$MASK,$D0,$D0
-+	vpaddq		$M0,$D1,$D1		# d0 -> d1
-+
-+	vpsrlq		\$26,$D4,$M4
-+	vpandq		$MASK,$D4,$D4
-+
-+	vpsrlq		\$26,$D1,$M1
-+	vpandq		$MASK,$D1,$D1
-+	vpaddq		$M1,$D2,$D2		# d1 -> d2
-+
-+	vpaddq		$M4,$D0,$D0
-+	vpsllq		\$2,$M4,$M4
-+	vpaddq		$M4,$D0,$D0		# d4 -> d0
-+
-+	vpsrlq		\$26,$D2,$M2
-+	vpandq		$MASK,$D2,$D2
-+	vpaddq		$M2,$D3,$D3		# d2 -> d3
-+
-+	vpsrlq		\$26,$D0,$M0
-+	vpandq		$MASK,$D0,$D0
-+	vpaddq		$M0,$D1,$D1		# d0 -> d1
-+
-+	vpsrlq		\$26,$D3,$M3
-+	vpandq		$MASK,$D3,$D3
-+	vpaddq		$M3,$D4,$D4		# d3 -> d4
-+
-+	################################################################
-+	# at this point we have 14243444 in $R0-$S4 and 05060708 in
-+	# $D0-$D4, ...
-+
-+	vpunpcklqdq	$T4,$T3,$T0	# transpose input
-+	vpunpckhqdq	$T4,$T3,$T4
-+
-+	# ... since input 64-bit lanes are ordered as 73625140, we could
-+	# "vperm" it to 76543210 (here and in each loop iteration), *or*
-+	# we could just flow along, hence the goal for $R0-$S4 is
-+	# 1858286838784888 ...
-+
-+	vmovdqa32	128(%rcx),$M0		# .Lpermd_avx512:
-+	mov		\$0x7777,%eax
-+	kmovw		%eax,%k1
-+
-+	vpermd		$R0,$M0,$R0		# 14243444 -> 1---2---3---4---
-+	vpermd		$R1,$M0,$R1
-+	vpermd		$R2,$M0,$R2
-+	vpermd		$R3,$M0,$R3
-+	vpermd		$R4,$M0,$R4
-+
-+	vpermd		$D0,$M0,${R0}{%k1}	# 05060708 -> 1858286838784888
-+	vpermd		$D1,$M0,${R1}{%k1}
-+	vpermd		$D2,$M0,${R2}{%k1}
-+	vpermd		$D3,$M0,${R3}{%k1}
-+	vpermd		$D4,$M0,${R4}{%k1}
-+
-+	vpslld		\$2,$R1,$S1		# *5
-+	vpslld		\$2,$R2,$S2
-+	vpslld		\$2,$R3,$S3
-+	vpslld		\$2,$R4,$S4
-+	vpaddd		$R1,$S1,$S1
-+	vpaddd		$R2,$S2,$S2
-+	vpaddd		$R3,$S3,$S3
-+	vpaddd		$R4,$S4,$S4
-+
-+	vpbroadcastq	32(%rcx),$PADBIT	# .L129
-+
-+	vpsrlq		\$52,$T0,$T2		# splat input
-+	vpsllq		\$12,$T4,$T3
-+	vporq		$T3,$T2,$T2
-+	vpsrlq		\$26,$T0,$T1
-+	vpsrlq		\$14,$T4,$T3
-+	vpsrlq		\$40,$T4,$T4		# 4
-+	vpandq		$MASK,$T2,$T2		# 2
-+	vpandq		$MASK,$T0,$T0		# 0
-+	#vpandq		$MASK,$T1,$T1		# 1
-+	#vpandq		$MASK,$T3,$T3		# 3
-+	#vporq		$PADBIT,$T4,$T4		# padbit, yes, always
-+
-+	vpaddq		$H2,$T2,$H2		# accumulate input
-+	sub		\$192,$len
-+	jbe		.Ltail_avx512
-+	jmp		.Loop_avx512
-+
-+.align	32
-+.Loop_avx512:
-+	################################################################
-+	# ((inp[0]*r^8+inp[ 8])*r^8+inp[16])*r^8
-+	# ((inp[1]*r^8+inp[ 9])*r^8+inp[17])*r^7
-+	# ((inp[2]*r^8+inp[10])*r^8+inp[18])*r^6
-+	# ((inp[3]*r^8+inp[11])*r^8+inp[19])*r^5
-+	# ((inp[4]*r^8+inp[12])*r^8+inp[20])*r^4
-+	# ((inp[5]*r^8+inp[13])*r^8+inp[21])*r^3
-+	# ((inp[6]*r^8+inp[14])*r^8+inp[22])*r^2
-+	# ((inp[7]*r^8+inp[15])*r^8+inp[23])*r^1
-+	#   \________/\___________/
-+	################################################################
-+	#vpaddq		$H2,$T2,$H2		# accumulate input
-+
-+	# d4 = h4*r0 + h3*r1   + h2*r2   + h1*r3   + h0*r4
-+	# d3 = h3*r0 + h2*r1   + h1*r2   + h0*r3   + h4*5*r4
-+	# d2 = h2*r0 + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-+	# d1 = h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3 + h2*5*r4
-+	# d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
-+	#
-+	# however, as h2 is "chronologically" first one available pull
-+	# corresponding operations up, so it's
-+	#
-+	# d3 = h2*r1   + h0*r3 + h1*r2   + h3*r0 + h4*5*r4
-+	# d4 = h2*r2   + h0*r4 + h1*r3   + h3*r1 + h4*r0
-+	# d0 = h2*5*r3 + h0*r0 + h1*5*r4         + h3*5*r2 + h4*5*r1
-+	# d1 = h2*5*r4 + h0*r1           + h1*r0 + h3*5*r3 + h4*5*r2
-+	# d2 = h2*r0           + h0*r2   + h1*r1 + h3*5*r4 + h4*5*r3
-+
-+	vpmuludq	$H2,$R1,$D3		# d3 = h2*r1
-+	 vpaddq		$H0,$T0,$H0
-+	vpmuludq	$H2,$R2,$D4		# d4 = h2*r2
-+	 vpandq		$MASK,$T1,$T1		# 1
-+	vpmuludq	$H2,$S3,$D0		# d0 = h2*s3
-+	 vpandq		$MASK,$T3,$T3		# 3
-+	vpmuludq	$H2,$S4,$D1		# d1 = h2*s4
-+	 vporq		$PADBIT,$T4,$T4		# padbit, yes, always
-+	vpmuludq	$H2,$R0,$D2		# d2 = h2*r0
-+	 vpaddq		$H1,$T1,$H1		# accumulate input
-+	 vpaddq		$H3,$T3,$H3
-+	 vpaddq		$H4,$T4,$H4
-+
-+	  vmovdqu64	16*0($inp),$T3		# load input
-+	  vmovdqu64	16*4($inp),$T4
-+	  lea		16*8($inp),$inp
-+	vpmuludq	$H0,$R3,$M3
-+	vpmuludq	$H0,$R4,$M4
-+	vpmuludq	$H0,$R0,$M0
-+	vpmuludq	$H0,$R1,$M1
-+	vpaddq		$M3,$D3,$D3		# d3 += h0*r3
-+	vpaddq		$M4,$D4,$D4		# d4 += h0*r4
-+	vpaddq		$M0,$D0,$D0		# d0 += h0*r0
-+	vpaddq		$M1,$D1,$D1		# d1 += h0*r1
-+
-+	vpmuludq	$H1,$R2,$M3
-+	vpmuludq	$H1,$R3,$M4
-+	vpmuludq	$H1,$S4,$M0
-+	vpmuludq	$H0,$R2,$M2
-+	vpaddq		$M3,$D3,$D3		# d3 += h1*r2
-+	vpaddq		$M4,$D4,$D4		# d4 += h1*r3
-+	vpaddq		$M0,$D0,$D0		# d0 += h1*s4
-+	vpaddq		$M2,$D2,$D2		# d2 += h0*r2
-+
-+	  vpunpcklqdq	$T4,$T3,$T0		# transpose input
-+	  vpunpckhqdq	$T4,$T3,$T4
-+
-+	vpmuludq	$H3,$R0,$M3
-+	vpmuludq	$H3,$R1,$M4
-+	vpmuludq	$H1,$R0,$M1
-+	vpmuludq	$H1,$R1,$M2
-+	vpaddq		$M3,$D3,$D3		# d3 += h3*r0
-+	vpaddq		$M4,$D4,$D4		# d4 += h3*r1
-+	vpaddq		$M1,$D1,$D1		# d1 += h1*r0
-+	vpaddq		$M2,$D2,$D2		# d2 += h1*r1
-+
-+	vpmuludq	$H4,$S4,$M3
-+	vpmuludq	$H4,$R0,$M4
-+	vpmuludq	$H3,$S2,$M0
-+	vpmuludq	$H3,$S3,$M1
-+	vpaddq		$M3,$D3,$D3		# d3 += h4*s4
-+	vpmuludq	$H3,$S4,$M2
-+	vpaddq		$M4,$D4,$D4		# d4 += h4*r0
-+	vpaddq		$M0,$D0,$D0		# d0 += h3*s2
-+	vpaddq		$M1,$D1,$D1		# d1 += h3*s3
-+	vpaddq		$M2,$D2,$D2		# d2 += h3*s4
-+
-+	vpmuludq	$H4,$S1,$M0
-+	vpmuludq	$H4,$S2,$M1
-+	vpmuludq	$H4,$S3,$M2
-+	vpaddq		$M0,$D0,$H0		# h0 = d0 + h4*s1
-+	vpaddq		$M1,$D1,$H1		# h1 = d2 + h4*s2
-+	vpaddq		$M2,$D2,$H2		# h2 = d3 + h4*s3
-+
-+	################################################################
-+	# lazy reduction (interleaved with input splat)
-+
-+	 vpsrlq		\$52,$T0,$T2		# splat input
-+	 vpsllq		\$12,$T4,$T3
-+
-+	vpsrlq		\$26,$D3,$H3
-+	vpandq		$MASK,$D3,$D3
-+	vpaddq		$H3,$D4,$H4		# h3 -> h4
-+
-+	 vporq		$T3,$T2,$T2
-+
-+	vpsrlq		\$26,$H0,$D0
-+	vpandq		$MASK,$H0,$H0
-+	vpaddq		$D0,$H1,$H1		# h0 -> h1
-+
-+	 vpandq		$MASK,$T2,$T2		# 2
-+
-+	vpsrlq		\$26,$H4,$D4
-+	vpandq		$MASK,$H4,$H4
-+
-+	vpsrlq		\$26,$H1,$D1
-+	vpandq		$MASK,$H1,$H1
-+	vpaddq		$D1,$H2,$H2		# h1 -> h2
-+
-+	vpaddq		$D4,$H0,$H0
-+	vpsllq		\$2,$D4,$D4
-+	vpaddq		$D4,$H0,$H0		# h4 -> h0
-+
-+	 vpaddq		$T2,$H2,$H2		# modulo-scheduled
-+	 vpsrlq		\$26,$T0,$T1
-+
-+	vpsrlq		\$26,$H2,$D2
-+	vpandq		$MASK,$H2,$H2
-+	vpaddq		$D2,$D3,$H3		# h2 -> h3
-+
-+	 vpsrlq		\$14,$T4,$T3
-+
-+	vpsrlq		\$26,$H0,$D0
-+	vpandq		$MASK,$H0,$H0
-+	vpaddq		$D0,$H1,$H1		# h0 -> h1
-+
-+	 vpsrlq		\$40,$T4,$T4		# 4
-+
-+	vpsrlq		\$26,$H3,$D3
-+	vpandq		$MASK,$H3,$H3
-+	vpaddq		$D3,$H4,$H4		# h3 -> h4
-+
-+	 vpandq		$MASK,$T0,$T0		# 0
-+	 #vpandq	$MASK,$T1,$T1		# 1
-+	 #vpandq	$MASK,$T3,$T3		# 3
-+	 #vporq		$PADBIT,$T4,$T4		# padbit, yes, always
-+
-+	sub		\$128,$len
-+	ja		.Loop_avx512
-+
-+.Ltail_avx512:
-+	################################################################
-+	# while above multiplications were by r^8 in all lanes, in last
-+	# iteration we multiply least significant lane by r^8 and most
-+	# significant one by r, that's why table gets shifted...
-+
-+	vpsrlq		\$32,$R0,$R0		# 0105020603070408
-+	vpsrlq		\$32,$R1,$R1
-+	vpsrlq		\$32,$R2,$R2
-+	vpsrlq		\$32,$S3,$S3
-+	vpsrlq		\$32,$S4,$S4
-+	vpsrlq		\$32,$R3,$R3
-+	vpsrlq		\$32,$R4,$R4
-+	vpsrlq		\$32,$S1,$S1
-+	vpsrlq		\$32,$S2,$S2
-+
-+	################################################################
-+	# load either next or last 64 byte of input
-+	lea		($inp,$len),$inp
-+
-+	#vpaddq		$H2,$T2,$H2		# accumulate input
-+	vpaddq		$H0,$T0,$H0
-+
-+	vpmuludq	$H2,$R1,$D3		# d3 = h2*r1
-+	vpmuludq	$H2,$R2,$D4		# d4 = h2*r2
-+	vpmuludq	$H2,$S3,$D0		# d0 = h2*s3
-+	 vpandq		$MASK,$T1,$T1		# 1
-+	vpmuludq	$H2,$S4,$D1		# d1 = h2*s4
-+	 vpandq		$MASK,$T3,$T3		# 3
-+	vpmuludq	$H2,$R0,$D2		# d2 = h2*r0
-+	 vporq		$PADBIT,$T4,$T4		# padbit, yes, always
-+	 vpaddq		$H1,$T1,$H1		# accumulate input
-+	 vpaddq		$H3,$T3,$H3
-+	 vpaddq		$H4,$T4,$H4
-+
-+	  vmovdqu	16*0($inp),%x#$T0
-+	vpmuludq	$H0,$R3,$M3
-+	vpmuludq	$H0,$R4,$M4
-+	vpmuludq	$H0,$R0,$M0
-+	vpmuludq	$H0,$R1,$M1
-+	vpaddq		$M3,$D3,$D3		# d3 += h0*r3
-+	vpaddq		$M4,$D4,$D4		# d4 += h0*r4
-+	vpaddq		$M0,$D0,$D0		# d0 += h0*r0
-+	vpaddq		$M1,$D1,$D1		# d1 += h0*r1
-+
-+	  vmovdqu	16*1($inp),%x#$T1
-+	vpmuludq	$H1,$R2,$M3
-+	vpmuludq	$H1,$R3,$M4
-+	vpmuludq	$H1,$S4,$M0
-+	vpmuludq	$H0,$R2,$M2
-+	vpaddq		$M3,$D3,$D3		# d3 += h1*r2
-+	vpaddq		$M4,$D4,$D4		# d4 += h1*r3
-+	vpaddq		$M0,$D0,$D0		# d0 += h1*s4
-+	vpaddq		$M2,$D2,$D2		# d2 += h0*r2
-+
-+	  vinserti128	\$1,16*2($inp),%y#$T0,%y#$T0
-+	vpmuludq	$H3,$R0,$M3
-+	vpmuludq	$H3,$R1,$M4
-+	vpmuludq	$H1,$R0,$M1
-+	vpmuludq	$H1,$R1,$M2
-+	vpaddq		$M3,$D3,$D3		# d3 += h3*r0
-+	vpaddq		$M4,$D4,$D4		# d4 += h3*r1
-+	vpaddq		$M1,$D1,$D1		# d1 += h1*r0
-+	vpaddq		$M2,$D2,$D2		# d2 += h1*r1
-+
-+	  vinserti128	\$1,16*3($inp),%y#$T1,%y#$T1
-+	vpmuludq	$H4,$S4,$M3
-+	vpmuludq	$H4,$R0,$M4
-+	vpmuludq	$H3,$S2,$M0
-+	vpmuludq	$H3,$S3,$M1
-+	vpmuludq	$H3,$S4,$M2
-+	vpaddq		$M3,$D3,$H3		# h3 = d3 + h4*s4
-+	vpaddq		$M4,$D4,$D4		# d4 += h4*r0
-+	vpaddq		$M0,$D0,$D0		# d0 += h3*s2
-+	vpaddq		$M1,$D1,$D1		# d1 += h3*s3
-+	vpaddq		$M2,$D2,$D2		# d2 += h3*s4
-+
-+	vpmuludq	$H4,$S1,$M0
-+	vpmuludq	$H4,$S2,$M1
-+	vpmuludq	$H4,$S3,$M2
-+	vpaddq		$M0,$D0,$H0		# h0 = d0 + h4*s1
-+	vpaddq		$M1,$D1,$H1		# h1 = d2 + h4*s2
-+	vpaddq		$M2,$D2,$H2		# h2 = d3 + h4*s3
-+
-+	################################################################
-+	# horizontal addition
-+
-+	mov		\$1,%eax
-+	vpermq		\$0xb1,$H3,$D3
-+	vpermq		\$0xb1,$D4,$H4
-+	vpermq		\$0xb1,$H0,$D0
-+	vpermq		\$0xb1,$H1,$D1
-+	vpermq		\$0xb1,$H2,$D2
-+	vpaddq		$D3,$H3,$H3
-+	vpaddq		$D4,$H4,$H4
-+	vpaddq		$D0,$H0,$H0
-+	vpaddq		$D1,$H1,$H1
-+	vpaddq		$D2,$H2,$H2
-+
-+	kmovw		%eax,%k3
-+	vpermq		\$0x2,$H3,$D3
-+	vpermq		\$0x2,$H4,$D4
-+	vpermq		\$0x2,$H0,$D0
-+	vpermq		\$0x2,$H1,$D1
-+	vpermq		\$0x2,$H2,$D2
-+	vpaddq		$D3,$H3,$H3
-+	vpaddq		$D4,$H4,$H4
-+	vpaddq		$D0,$H0,$H0
-+	vpaddq		$D1,$H1,$H1
-+	vpaddq		$D2,$H2,$H2
-+
-+	vextracti64x4	\$0x1,$H3,%y#$D3
-+	vextracti64x4	\$0x1,$H4,%y#$D4
-+	vextracti64x4	\$0x1,$H0,%y#$D0
-+	vextracti64x4	\$0x1,$H1,%y#$D1
-+	vextracti64x4	\$0x1,$H2,%y#$D2
-+	vpaddq		$D3,$H3,${H3}{%k3}{z}	# keep single qword in case
-+	vpaddq		$D4,$H4,${H4}{%k3}{z}	# it's passed to .Ltail_avx2
-+	vpaddq		$D0,$H0,${H0}{%k3}{z}
-+	vpaddq		$D1,$H1,${H1}{%k3}{z}
-+	vpaddq		$D2,$H2,${H2}{%k3}{z}
-+___
-+map(s/%z/%y/,($T0,$T1,$T2,$T3,$T4, $PADBIT));
-+map(s/%z/%y/,($H0,$H1,$H2,$H3,$H4, $D0,$D1,$D2,$D3,$D4, $MASK));
-+$code.=<<___;
-+	################################################################
-+	# lazy reduction (interleaved with input splat)
-+
-+	vpsrlq		\$26,$H3,$D3
-+	vpand		$MASK,$H3,$H3
-+	 vpsrldq	\$6,$T0,$T2		# splat input
-+	 vpsrldq	\$6,$T1,$T3
-+	 vpunpckhqdq	$T1,$T0,$T4		# 4
-+	vpaddq		$D3,$H4,$H4		# h3 -> h4
-+
-+	vpsrlq		\$26,$H0,$D0
-+	vpand		$MASK,$H0,$H0
-+	 vpunpcklqdq	$T3,$T2,$T2		# 2:3
-+	 vpunpcklqdq	$T1,$T0,$T0		# 0:1
-+	vpaddq		$D0,$H1,$H1		# h0 -> h1
-+
-+	vpsrlq		\$26,$H4,$D4
-+	vpand		$MASK,$H4,$H4
-+
-+	vpsrlq		\$26,$H1,$D1
-+	vpand		$MASK,$H1,$H1
-+	 vpsrlq		\$30,$T2,$T3
-+	 vpsrlq		\$4,$T2,$T2
-+	vpaddq		$D1,$H2,$H2		# h1 -> h2
-+
-+	vpaddq		$D4,$H0,$H0
-+	vpsllq		\$2,$D4,$D4
-+	 vpsrlq		\$26,$T0,$T1
-+	 vpsrlq		\$40,$T4,$T4		# 4
-+	vpaddq		$D4,$H0,$H0		# h4 -> h0
-+
-+	vpsrlq		\$26,$H2,$D2
-+	vpand		$MASK,$H2,$H2
-+	 vpand		$MASK,$T2,$T2		# 2
-+	 vpand		$MASK,$T0,$T0		# 0
-+	vpaddq		$D2,$H3,$H3		# h2 -> h3
-+
-+	vpsrlq		\$26,$H0,$D0
-+	vpand		$MASK,$H0,$H0
-+	 vpaddq		$H2,$T2,$H2		# accumulate input for .Ltail_avx2
-+	 vpand		$MASK,$T1,$T1		# 1
-+	vpaddq		$D0,$H1,$H1		# h0 -> h1
-+
-+	vpsrlq		\$26,$H3,$D3
-+	vpand		$MASK,$H3,$H3
-+	 vpand		$MASK,$T3,$T3		# 3
-+	 vpor		32(%rcx),$T4,$T4	# padbit, yes, always
-+	vpaddq		$D3,$H4,$H4		# h3 -> h4
-+
-+	lea		0x90(%rsp),%rax		# size optimization for .Ltail_avx2
-+	add		\$64,$len
-+	jnz		.Ltail_avx2
-+
-+	vpsubq		$T2,$H2,$H2		# undo input accumulation
-+	vmovd		%x#$H0,`4*0-48-64`($ctx)# save partially reduced
-+	vmovd		%x#$H1,`4*1-48-64`($ctx)
-+	vmovd		%x#$H2,`4*2-48-64`($ctx)
-+	vmovd		%x#$H3,`4*3-48-64`($ctx)
-+	vmovd		%x#$H4,`4*4-48-64`($ctx)
-+	vzeroall
-+___
-+$code.=<<___	if ($win64);
-+	movdqa		0x50(%r11),%xmm6
-+	movdqa		0x60(%r11),%xmm7
-+	movdqa		0x70(%r11),%xmm8
-+	movdqa		0x80(%r11),%xmm9
-+	movdqa		0x90(%r11),%xmm10
-+	movdqa		0xa0(%r11),%xmm11
-+	movdqa		0xb0(%r11),%xmm12
-+	movdqa		0xc0(%r11),%xmm13
-+	movdqa		0xd0(%r11),%xmm14
-+	movdqa		0xe0(%r11),%xmm15
-+	lea		0xf8(%r11),%rsp
-+.Ldo_avx512_epilogue:
-+___
-+$code.=<<___	if (!$win64);
-+	lea		8(%r11),%rsp
-+.cfi_def_cfa		%rsp,8
-+___
-+$code.=<<___;
-+	ret
-+.cfi_endproc
-+.size	poly1305_blocks_avx512,.-poly1305_blocks_avx512
-+___
-+if ($avx>3) {
-+########################################################################
-+# VPMADD52 version using 2^44 radix.
-+#
-+# One can argue that base 2^52 would be more natural. Well, even though
-+# some operations would be more natural, one has to recognize couple of
-+# things. Base 2^52 doesn't provide advantage over base 2^44 if you look
-+# at amount of multiply-n-accumulate operations. Secondly, it makes it
-+# impossible to pre-compute multiples of 5 [referred to as s[]/sN in
-+# reference implementations], which means that more such operations
-+# would have to be performed in inner loop, which in turn makes critical
-+# path longer. In other words, even though base 2^44 reduction might
-+# look less elegant, overall critical path is actually shorter...
-+
-+########################################################################
-+# Layout of opaque area is following.
-+#
-+#	unsigned __int64 h[3];		# current hash value base 2^44
-+#	unsigned __int64 s[2];		# key value*20 base 2^44
-+#	unsigned __int64 r[3];		# key value base 2^44
-+#	struct { unsigned __int64 r^1, r^3, r^2, r^4; } R[4];
-+#					# r^n positions reflect
-+#					# placement in register, not
-+#					# memory, R[3] is R[1]*20
-+
-+$code.=<<___;
-+.type	poly1305_init_base2_44,\@function,3
-+.align	32
-+poly1305_init_base2_44:
-+	xor	%rax,%rax
-+	mov	%rax,0($ctx)		# initialize hash value
-+	mov	%rax,8($ctx)
-+	mov	%rax,16($ctx)
-+
-+.Linit_base2_44:
-+	lea	poly1305_blocks_vpmadd52(%rip),%r10
-+	lea	poly1305_emit_base2_44(%rip),%r11
-+
-+	mov	\$0x0ffffffc0fffffff,%rax
-+	mov	\$0x0ffffffc0ffffffc,%rcx
-+	and	0($inp),%rax
-+	mov	\$0x00000fffffffffff,%r8
-+	and	8($inp),%rcx
-+	mov	\$0x00000fffffffffff,%r9
-+	and	%rax,%r8
-+	shrd	\$44,%rcx,%rax
-+	mov	%r8,40($ctx)		# r0
-+	and	%r9,%rax
-+	shr	\$24,%rcx
-+	mov	%rax,48($ctx)		# r1
-+	lea	(%rax,%rax,4),%rax	# *5
-+	mov	%rcx,56($ctx)		# r2
-+	shl	\$2,%rax		# magic <<2
-+	lea	(%rcx,%rcx,4),%rcx	# *5
-+	shl	\$2,%rcx		# magic <<2
-+	mov	%rax,24($ctx)		# s1
-+	mov	%rcx,32($ctx)		# s2
-+	movq	\$-1,64($ctx)		# write impossible value
-+___
-+$code.=<<___	if ($flavour !~ /elf32/);
-+	mov	%r10,0(%rdx)
-+	mov	%r11,8(%rdx)
-+___
-+$code.=<<___	if ($flavour =~ /elf32/);
-+	mov	%r10d,0(%rdx)
-+	mov	%r11d,4(%rdx)
-+___
-+$code.=<<___;
-+	mov	\$1,%eax
-+	ret
-+.size	poly1305_init_base2_44,.-poly1305_init_base2_44
-+___
-+{
-+my ($H0,$H1,$H2,$r2r1r0,$r1r0s2,$r0s2s1,$Dlo,$Dhi) = map("%ymm$_",(0..5,16,17));
-+my ($T0,$inp_permd,$inp_shift,$PAD) = map("%ymm$_",(18..21));
-+my ($reduc_mask,$reduc_rght,$reduc_left) = map("%ymm$_",(22..25));
-+
-+$code.=<<___;
-+.type	poly1305_blocks_vpmadd52,\@function,4
-+.align	32
-+poly1305_blocks_vpmadd52:
-+	shr	\$4,$len
-+	jz	.Lno_data_vpmadd52		# too short
-+
-+	shl	\$40,$padbit
-+	mov	64($ctx),%r8			# peek on power of the key
-+
-+	# if powers of the key are not calculated yet, process up to 3
-+	# blocks with this single-block subroutine, otherwise ensure that
-+	# length is divisible by 2 blocks and pass the rest down to next
-+	# subroutine...
-+
-+	mov	\$3,%rax
-+	mov	\$1,%r10
-+	cmp	\$4,$len			# is input long
-+	cmovae	%r10,%rax
-+	test	%r8,%r8				# is power value impossible?
-+	cmovns	%r10,%rax
-+
-+	and	$len,%rax			# is input of favourable length?
-+	jz	.Lblocks_vpmadd52_4x
-+
-+	sub		%rax,$len
-+	mov		\$7,%r10d
-+	mov		\$1,%r11d
-+	kmovw		%r10d,%k7
-+	lea		.L2_44_inp_permd(%rip),%r10
-+	kmovw		%r11d,%k1
-+
-+	vmovq		$padbit,%x#$PAD
-+	vmovdqa64	0(%r10),$inp_permd	# .L2_44_inp_permd
-+	vmovdqa64	32(%r10),$inp_shift	# .L2_44_inp_shift
-+	vpermq		\$0xcf,$PAD,$PAD
-+	vmovdqa64	64(%r10),$reduc_mask	# .L2_44_mask
-+
-+	vmovdqu64	0($ctx),${Dlo}{%k7}{z}		# load hash value
-+	vmovdqu64	40($ctx),${r2r1r0}{%k7}{z}	# load keys
-+	vmovdqu64	32($ctx),${r1r0s2}{%k7}{z}
-+	vmovdqu64	24($ctx),${r0s2s1}{%k7}{z}
-+
-+	vmovdqa64	96(%r10),$reduc_rght	# .L2_44_shift_rgt
-+	vmovdqa64	128(%r10),$reduc_left	# .L2_44_shift_lft
-+
-+	jmp		.Loop_vpmadd52
-+
-+.align	32
-+.Loop_vpmadd52:
-+	vmovdqu32	0($inp),%x#$T0		# load input as ----3210
-+	lea		16($inp),$inp
-+
-+	vpermd		$T0,$inp_permd,$T0	# ----3210 -> --322110
-+	vpsrlvq		$inp_shift,$T0,$T0
-+	vpandq		$reduc_mask,$T0,$T0
-+	vporq		$PAD,$T0,$T0
-+
-+	vpaddq		$T0,$Dlo,$Dlo		# accumulate input
-+
-+	vpermq		\$0,$Dlo,${H0}{%k7}{z}	# smash hash value
-+	vpermq		\$0b01010101,$Dlo,${H1}{%k7}{z}
-+	vpermq		\$0b10101010,$Dlo,${H2}{%k7}{z}
-+
-+	vpxord		$Dlo,$Dlo,$Dlo
-+	vpxord		$Dhi,$Dhi,$Dhi
-+
-+	vpmadd52luq	$r2r1r0,$H0,$Dlo
-+	vpmadd52huq	$r2r1r0,$H0,$Dhi
-+
-+	vpmadd52luq	$r1r0s2,$H1,$Dlo
-+	vpmadd52huq	$r1r0s2,$H1,$Dhi
-+
-+	vpmadd52luq	$r0s2s1,$H2,$Dlo
-+	vpmadd52huq	$r0s2s1,$H2,$Dhi
-+
-+	vpsrlvq		$reduc_rght,$Dlo,$T0	# 0 in topmost qword
-+	vpsllvq		$reduc_left,$Dhi,$Dhi	# 0 in topmost qword
-+	vpandq		$reduc_mask,$Dlo,$Dlo
-+
-+	vpaddq		$T0,$Dhi,$Dhi
-+
-+	vpermq		\$0b10010011,$Dhi,$Dhi	# 0 in lowest qword
-+
-+	vpaddq		$Dhi,$Dlo,$Dlo		# note topmost qword :-)
-+
-+	vpsrlvq		$reduc_rght,$Dlo,$T0	# 0 in topmost word
-+	vpandq		$reduc_mask,$Dlo,$Dlo
-+
-+	vpermq		\$0b10010011,$T0,$T0
-+
-+	vpaddq		$T0,$Dlo,$Dlo
-+
-+	vpermq		\$0b10010011,$Dlo,${T0}{%k1}{z}
-+
-+	vpaddq		$T0,$Dlo,$Dlo
-+	vpsllq		\$2,$T0,$T0
-+
-+	vpaddq		$T0,$Dlo,$Dlo
-+
-+	dec		%rax			# len-=16
-+	jnz		.Loop_vpmadd52
-+
-+	vmovdqu64	$Dlo,0($ctx){%k7}	# store hash value
-+
-+	test		$len,$len
-+	jnz		.Lblocks_vpmadd52_4x
-+
-+.Lno_data_vpmadd52:
-+	ret
-+.size	poly1305_blocks_vpmadd52,.-poly1305_blocks_vpmadd52
-+___
-+}
-+{
-+########################################################################
-+# As implied by its name 4x subroutine processes 4 blocks in parallel
-+# (but handles even 4*n+2 blocks lengths). It takes up to 4th key power
-+# and is handled in 256-bit %ymm registers.
-+
-+my ($H0,$H1,$H2,$R0,$R1,$R2,$S1,$S2) = map("%ymm$_",(0..5,16,17));
-+my ($D0lo,$D0hi,$D1lo,$D1hi,$D2lo,$D2hi) = map("%ymm$_",(18..23));
-+my ($T0,$T1,$T2,$T3,$mask44,$mask42,$tmp,$PAD) = map("%ymm$_",(24..31));
-+
-+$code.=<<___;
-+.type	poly1305_blocks_vpmadd52_4x,\@function,4
-+.align	32
-+poly1305_blocks_vpmadd52_4x:
-+	shr	\$4,$len
-+	jz	.Lno_data_vpmadd52_4x		# too short
-+
-+	shl	\$40,$padbit
-+	mov	64($ctx),%r8			# peek on power of the key
-+
-+.Lblocks_vpmadd52_4x:
-+	vpbroadcastq	$padbit,$PAD
-+
-+	vmovdqa64	.Lx_mask44(%rip),$mask44
-+	mov		\$5,%eax
-+	vmovdqa64	.Lx_mask42(%rip),$mask42
-+	kmovw		%eax,%k1		# used in 2x path
-+
-+	test		%r8,%r8			# is power value impossible?
-+	js		.Linit_vpmadd52		# if it is, then init R[4]
-+
-+	vmovq		0($ctx),%x#$H0		# load current hash value
-+	vmovq		8($ctx),%x#$H1
-+	vmovq		16($ctx),%x#$H2
-+
-+	test		\$3,$len		# is length 4*n+2?
-+	jnz		.Lblocks_vpmadd52_2x_do
-+
-+.Lblocks_vpmadd52_4x_do:
-+	vpbroadcastq	64($ctx),$R0		# load 4th power of the key
-+	vpbroadcastq	96($ctx),$R1
-+	vpbroadcastq	128($ctx),$R2
-+	vpbroadcastq	160($ctx),$S1
-+
-+.Lblocks_vpmadd52_4x_key_loaded:
-+	vpsllq		\$2,$R2,$S2		# S2 = R2*5*4
-+	vpaddq		$R2,$S2,$S2
-+	vpsllq		\$2,$S2,$S2
-+
-+	test		\$7,$len		# is len 8*n?
-+	jz		.Lblocks_vpmadd52_8x
-+
-+	vmovdqu64	16*0($inp),$T2		# load data
-+	vmovdqu64	16*2($inp),$T3
-+	lea		16*4($inp),$inp
-+
-+	vpunpcklqdq	$T3,$T2,$T1		# transpose data
-+	vpunpckhqdq	$T3,$T2,$T3
-+
-+	# at this point 64-bit lanes are ordered as 3-1-2-0
-+
-+	vpsrlq		\$24,$T3,$T2		# splat the data
-+	vporq		$PAD,$T2,$T2
-+	 vpaddq		$T2,$H2,$H2		# accumulate input
-+	vpandq		$mask44,$T1,$T0
-+	vpsrlq		\$44,$T1,$T1
-+	vpsllq		\$20,$T3,$T3
-+	vporq		$T3,$T1,$T1
-+	vpandq		$mask44,$T1,$T1
-+
-+	sub		\$4,$len
-+	jz		.Ltail_vpmadd52_4x
-+	jmp		.Loop_vpmadd52_4x
-+	ud2
-+
-+.align	32
-+.Linit_vpmadd52:
-+	vmovq		24($ctx),%x#$S1		# load key
-+	vmovq		56($ctx),%x#$H2
-+	vmovq		32($ctx),%x#$S2
-+	vmovq		40($ctx),%x#$R0
-+	vmovq		48($ctx),%x#$R1
-+
-+	vmovdqa		$R0,$H0
-+	vmovdqa		$R1,$H1
-+	vmovdqa		$H2,$R2
-+
-+	mov		\$2,%eax
-+
-+.Lmul_init_vpmadd52:
-+	vpxorq		$D0lo,$D0lo,$D0lo
-+	vpmadd52luq	$H2,$S1,$D0lo
-+	vpxorq		$D0hi,$D0hi,$D0hi
-+	vpmadd52huq	$H2,$S1,$D0hi
-+	vpxorq		$D1lo,$D1lo,$D1lo
-+	vpmadd52luq	$H2,$S2,$D1lo
-+	vpxorq		$D1hi,$D1hi,$D1hi
-+	vpmadd52huq	$H2,$S2,$D1hi
-+	vpxorq		$D2lo,$D2lo,$D2lo
-+	vpmadd52luq	$H2,$R0,$D2lo
-+	vpxorq		$D2hi,$D2hi,$D2hi
-+	vpmadd52huq	$H2,$R0,$D2hi
-+
-+	vpmadd52luq	$H0,$R0,$D0lo
-+	vpmadd52huq	$H0,$R0,$D0hi
-+	vpmadd52luq	$H0,$R1,$D1lo
-+	vpmadd52huq	$H0,$R1,$D1hi
-+	vpmadd52luq	$H0,$R2,$D2lo
-+	vpmadd52huq	$H0,$R2,$D2hi
-+
-+	vpmadd52luq	$H1,$S2,$D0lo
-+	vpmadd52huq	$H1,$S2,$D0hi
-+	vpmadd52luq	$H1,$R0,$D1lo
-+	vpmadd52huq	$H1,$R0,$D1hi
-+	vpmadd52luq	$H1,$R1,$D2lo
-+	vpmadd52huq	$H1,$R1,$D2hi
-+
-+	################################################################
-+	# partial reduction
-+	vpsrlq		\$44,$D0lo,$tmp
-+	vpsllq		\$8,$D0hi,$D0hi
-+	vpandq		$mask44,$D0lo,$H0
-+	vpaddq		$tmp,$D0hi,$D0hi
-+
-+	vpaddq		$D0hi,$D1lo,$D1lo
-+
-+	vpsrlq		\$44,$D1lo,$tmp
-+	vpsllq		\$8,$D1hi,$D1hi
-+	vpandq		$mask44,$D1lo,$H1
-+	vpaddq		$tmp,$D1hi,$D1hi
-+
-+	vpaddq		$D1hi,$D2lo,$D2lo
-+
-+	vpsrlq		\$42,$D2lo,$tmp
-+	vpsllq		\$10,$D2hi,$D2hi
-+	vpandq		$mask42,$D2lo,$H2
-+	vpaddq		$tmp,$D2hi,$D2hi
-+
-+	vpaddq		$D2hi,$H0,$H0
-+	vpsllq		\$2,$D2hi,$D2hi
-+
-+	vpaddq		$D2hi,$H0,$H0
-+
-+	vpsrlq		\$44,$H0,$tmp		# additional step
-+	vpandq		$mask44,$H0,$H0
-+
-+	vpaddq		$tmp,$H1,$H1
-+
-+	dec		%eax
-+	jz		.Ldone_init_vpmadd52
-+
-+	vpunpcklqdq	$R1,$H1,$R1		# 1,2
-+	vpbroadcastq	%x#$H1,%x#$H1		# 2,2
-+	vpunpcklqdq	$R2,$H2,$R2
-+	vpbroadcastq	%x#$H2,%x#$H2
-+	vpunpcklqdq	$R0,$H0,$R0
-+	vpbroadcastq	%x#$H0,%x#$H0
-+
-+	vpsllq		\$2,$R1,$S1		# S1 = R1*5*4
-+	vpsllq		\$2,$R2,$S2		# S2 = R2*5*4
-+	vpaddq		$R1,$S1,$S1
-+	vpaddq		$R2,$S2,$S2
-+	vpsllq		\$2,$S1,$S1
-+	vpsllq		\$2,$S2,$S2
-+
-+	jmp		.Lmul_init_vpmadd52
-+	ud2
-+
-+.align	32
-+.Ldone_init_vpmadd52:
-+	vinserti128	\$1,%x#$R1,$H1,$R1	# 1,2,3,4
-+	vinserti128	\$1,%x#$R2,$H2,$R2
-+	vinserti128	\$1,%x#$R0,$H0,$R0
-+
-+	vpermq		\$0b11011000,$R1,$R1	# 1,3,2,4
-+	vpermq		\$0b11011000,$R2,$R2
-+	vpermq		\$0b11011000,$R0,$R0
-+
-+	vpsllq		\$2,$R1,$S1		# S1 = R1*5*4
-+	vpaddq		$R1,$S1,$S1
-+	vpsllq		\$2,$S1,$S1
-+
-+	vmovq		0($ctx),%x#$H0		# load current hash value
-+	vmovq		8($ctx),%x#$H1
-+	vmovq		16($ctx),%x#$H2
-+
-+	test		\$3,$len		# is length 4*n+2?
-+	jnz		.Ldone_init_vpmadd52_2x
-+
-+	vmovdqu64	$R0,64($ctx)		# save key powers
-+	vpbroadcastq	%x#$R0,$R0		# broadcast 4th power
-+	vmovdqu64	$R1,96($ctx)
-+	vpbroadcastq	%x#$R1,$R1
-+	vmovdqu64	$R2,128($ctx)
-+	vpbroadcastq	%x#$R2,$R2
-+	vmovdqu64	$S1,160($ctx)
-+	vpbroadcastq	%x#$S1,$S1
-+
-+	jmp		.Lblocks_vpmadd52_4x_key_loaded
-+	ud2
-+
-+.align	32
-+.Ldone_init_vpmadd52_2x:
-+	vmovdqu64	$R0,64($ctx)		# save key powers
-+	vpsrldq		\$8,$R0,$R0		# 0-1-0-2
-+	vmovdqu64	$R1,96($ctx)
-+	vpsrldq		\$8,$R1,$R1
-+	vmovdqu64	$R2,128($ctx)
-+	vpsrldq		\$8,$R2,$R2
-+	vmovdqu64	$S1,160($ctx)
-+	vpsrldq		\$8,$S1,$S1
-+	jmp		.Lblocks_vpmadd52_2x_key_loaded
-+	ud2
-+
-+.align	32
-+.Lblocks_vpmadd52_2x_do:
-+	vmovdqu64	128+8($ctx),${R2}{%k1}{z}# load 2nd and 1st key powers
-+	vmovdqu64	160+8($ctx),${S1}{%k1}{z}
-+	vmovdqu64	64+8($ctx),${R0}{%k1}{z}
-+	vmovdqu64	96+8($ctx),${R1}{%k1}{z}
-+
-+.Lblocks_vpmadd52_2x_key_loaded:
-+	vmovdqu64	16*0($inp),$T2		# load data
-+	vpxorq		$T3,$T3,$T3
-+	lea		16*2($inp),$inp
-+
-+	vpunpcklqdq	$T3,$T2,$T1		# transpose data
-+	vpunpckhqdq	$T3,$T2,$T3
-+
-+	# at this point 64-bit lanes are ordered as x-1-x-0
-+
-+	vpsrlq		\$24,$T3,$T2		# splat the data
-+	vporq		$PAD,$T2,$T2
-+	 vpaddq		$T2,$H2,$H2		# accumulate input
-+	vpandq		$mask44,$T1,$T0
-+	vpsrlq		\$44,$T1,$T1
-+	vpsllq		\$20,$T3,$T3
-+	vporq		$T3,$T1,$T1
-+	vpandq		$mask44,$T1,$T1
-+
-+	jmp		.Ltail_vpmadd52_2x
-+	ud2
-+
-+.align	32
-+.Loop_vpmadd52_4x:
-+	#vpaddq		$T2,$H2,$H2		# accumulate input
-+	vpaddq		$T0,$H0,$H0
-+	vpaddq		$T1,$H1,$H1
-+
-+	vpxorq		$D0lo,$D0lo,$D0lo
-+	vpmadd52luq	$H2,$S1,$D0lo
-+	vpxorq		$D0hi,$D0hi,$D0hi
-+	vpmadd52huq	$H2,$S1,$D0hi
-+	vpxorq		$D1lo,$D1lo,$D1lo
-+	vpmadd52luq	$H2,$S2,$D1lo
-+	vpxorq		$D1hi,$D1hi,$D1hi
-+	vpmadd52huq	$H2,$S2,$D1hi
-+	vpxorq		$D2lo,$D2lo,$D2lo
-+	vpmadd52luq	$H2,$R0,$D2lo
-+	vpxorq		$D2hi,$D2hi,$D2hi
-+	vpmadd52huq	$H2,$R0,$D2hi
-+
-+	 vmovdqu64	16*0($inp),$T2		# load data
-+	 vmovdqu64	16*2($inp),$T3
-+	 lea		16*4($inp),$inp
-+	vpmadd52luq	$H0,$R0,$D0lo
-+	vpmadd52huq	$H0,$R0,$D0hi
-+	vpmadd52luq	$H0,$R1,$D1lo
-+	vpmadd52huq	$H0,$R1,$D1hi
-+	vpmadd52luq	$H0,$R2,$D2lo
-+	vpmadd52huq	$H0,$R2,$D2hi
-+
-+	 vpunpcklqdq	$T3,$T2,$T1		# transpose data
-+	 vpunpckhqdq	$T3,$T2,$T3
-+	vpmadd52luq	$H1,$S2,$D0lo
-+	vpmadd52huq	$H1,$S2,$D0hi
-+	vpmadd52luq	$H1,$R0,$D1lo
-+	vpmadd52huq	$H1,$R0,$D1hi
-+	vpmadd52luq	$H1,$R1,$D2lo
-+	vpmadd52huq	$H1,$R1,$D2hi
-+
-+	################################################################
-+	# partial reduction (interleaved with data splat)
-+	vpsrlq		\$44,$D0lo,$tmp
-+	vpsllq		\$8,$D0hi,$D0hi
-+	vpandq		$mask44,$D0lo,$H0
-+	vpaddq		$tmp,$D0hi,$D0hi
-+
-+	 vpsrlq		\$24,$T3,$T2
-+	 vporq		$PAD,$T2,$T2
-+	vpaddq		$D0hi,$D1lo,$D1lo
-+
-+	vpsrlq		\$44,$D1lo,$tmp
-+	vpsllq		\$8,$D1hi,$D1hi
-+	vpandq		$mask44,$D1lo,$H1
-+	vpaddq		$tmp,$D1hi,$D1hi
-+
-+	 vpandq		$mask44,$T1,$T0
-+	 vpsrlq		\$44,$T1,$T1
-+	 vpsllq		\$20,$T3,$T3
-+	vpaddq		$D1hi,$D2lo,$D2lo
-+
-+	vpsrlq		\$42,$D2lo,$tmp
-+	vpsllq		\$10,$D2hi,$D2hi
-+	vpandq		$mask42,$D2lo,$H2
-+	vpaddq		$tmp,$D2hi,$D2hi
-+
-+	  vpaddq	$T2,$H2,$H2		# accumulate input
-+	vpaddq		$D2hi,$H0,$H0
-+	vpsllq		\$2,$D2hi,$D2hi
-+
-+	vpaddq		$D2hi,$H0,$H0
-+	 vporq		$T3,$T1,$T1
-+	 vpandq		$mask44,$T1,$T1
-+
-+	vpsrlq		\$44,$H0,$tmp		# additional step
-+	vpandq		$mask44,$H0,$H0
-+
-+	vpaddq		$tmp,$H1,$H1
-+
-+	sub		\$4,$len		# len-=64
-+	jnz		.Loop_vpmadd52_4x
-+
-+.Ltail_vpmadd52_4x:
-+	vmovdqu64	128($ctx),$R2		# load all key powers
-+	vmovdqu64	160($ctx),$S1
-+	vmovdqu64	64($ctx),$R0
-+	vmovdqu64	96($ctx),$R1
-+
-+.Ltail_vpmadd52_2x:
-+	vpsllq		\$2,$R2,$S2		# S2 = R2*5*4
-+	vpaddq		$R2,$S2,$S2
-+	vpsllq		\$2,$S2,$S2
-+
-+	#vpaddq		$T2,$H2,$H2		# accumulate input
-+	vpaddq		$T0,$H0,$H0
-+	vpaddq		$T1,$H1,$H1
-+
-+	vpxorq		$D0lo,$D0lo,$D0lo
-+	vpmadd52luq	$H2,$S1,$D0lo
-+	vpxorq		$D0hi,$D0hi,$D0hi
-+	vpmadd52huq	$H2,$S1,$D0hi
-+	vpxorq		$D1lo,$D1lo,$D1lo
-+	vpmadd52luq	$H2,$S2,$D1lo
-+	vpxorq		$D1hi,$D1hi,$D1hi
-+	vpmadd52huq	$H2,$S2,$D1hi
-+	vpxorq		$D2lo,$D2lo,$D2lo
-+	vpmadd52luq	$H2,$R0,$D2lo
-+	vpxorq		$D2hi,$D2hi,$D2hi
-+	vpmadd52huq	$H2,$R0,$D2hi
-+
-+	vpmadd52luq	$H0,$R0,$D0lo
-+	vpmadd52huq	$H0,$R0,$D0hi
-+	vpmadd52luq	$H0,$R1,$D1lo
-+	vpmadd52huq	$H0,$R1,$D1hi
-+	vpmadd52luq	$H0,$R2,$D2lo
-+	vpmadd52huq	$H0,$R2,$D2hi
-+
-+	vpmadd52luq	$H1,$S2,$D0lo
-+	vpmadd52huq	$H1,$S2,$D0hi
-+	vpmadd52luq	$H1,$R0,$D1lo
-+	vpmadd52huq	$H1,$R0,$D1hi
-+	vpmadd52luq	$H1,$R1,$D2lo
-+	vpmadd52huq	$H1,$R1,$D2hi
-+
-+	################################################################
-+	# horizontal addition
-+
-+	mov		\$1,%eax
-+	kmovw		%eax,%k1
-+	vpsrldq		\$8,$D0lo,$T0
-+	vpsrldq		\$8,$D0hi,$H0
-+	vpsrldq		\$8,$D1lo,$T1
-+	vpsrldq		\$8,$D1hi,$H1
-+	vpaddq		$T0,$D0lo,$D0lo
-+	vpaddq		$H0,$D0hi,$D0hi
-+	vpsrldq		\$8,$D2lo,$T2
-+	vpsrldq		\$8,$D2hi,$H2
-+	vpaddq		$T1,$D1lo,$D1lo
-+	vpaddq		$H1,$D1hi,$D1hi
-+	 vpermq		\$0x2,$D0lo,$T0
-+	 vpermq		\$0x2,$D0hi,$H0
-+	vpaddq		$T2,$D2lo,$D2lo
-+	vpaddq		$H2,$D2hi,$D2hi
-+
-+	vpermq		\$0x2,$D1lo,$T1
-+	vpermq		\$0x2,$D1hi,$H1
-+	vpaddq		$T0,$D0lo,${D0lo}{%k1}{z}
-+	vpaddq		$H0,$D0hi,${D0hi}{%k1}{z}
-+	vpermq		\$0x2,$D2lo,$T2
-+	vpermq		\$0x2,$D2hi,$H2
-+	vpaddq		$T1,$D1lo,${D1lo}{%k1}{z}
-+	vpaddq		$H1,$D1hi,${D1hi}{%k1}{z}
-+	vpaddq		$T2,$D2lo,${D2lo}{%k1}{z}
-+	vpaddq		$H2,$D2hi,${D2hi}{%k1}{z}
-+
-+	################################################################
-+	# partial reduction
-+	vpsrlq		\$44,$D0lo,$tmp
-+	vpsllq		\$8,$D0hi,$D0hi
-+	vpandq		$mask44,$D0lo,$H0
-+	vpaddq		$tmp,$D0hi,$D0hi
-+
-+	vpaddq		$D0hi,$D1lo,$D1lo
-+
-+	vpsrlq		\$44,$D1lo,$tmp
-+	vpsllq		\$8,$D1hi,$D1hi
-+	vpandq		$mask44,$D1lo,$H1
-+	vpaddq		$tmp,$D1hi,$D1hi
-+
-+	vpaddq		$D1hi,$D2lo,$D2lo
-+
-+	vpsrlq		\$42,$D2lo,$tmp
-+	vpsllq		\$10,$D2hi,$D2hi
-+	vpandq		$mask42,$D2lo,$H2
-+	vpaddq		$tmp,$D2hi,$D2hi
-+
-+	vpaddq		$D2hi,$H0,$H0
-+	vpsllq		\$2,$D2hi,$D2hi
-+
-+	vpaddq		$D2hi,$H0,$H0
-+
-+	vpsrlq		\$44,$H0,$tmp		# additional step
-+	vpandq		$mask44,$H0,$H0
-+
-+	vpaddq		$tmp,$H1,$H1
-+						# at this point $len is
-+						# either 4*n+2 or 0...
-+	sub		\$2,$len		# len-=32
-+	ja		.Lblocks_vpmadd52_4x_do
-+
-+	vmovq		%x#$H0,0($ctx)
-+	vmovq		%x#$H1,8($ctx)
-+	vmovq		%x#$H2,16($ctx)
-+	vzeroall
-+
-+.Lno_data_vpmadd52_4x:
-+	ret
-+.size	poly1305_blocks_vpmadd52_4x,.-poly1305_blocks_vpmadd52_4x
-+___
-+}
-+{
-+########################################################################
-+# As implied by its name 8x subroutine processes 8 blocks in parallel...
-+# This is intermediate version, as it's used only in cases when input
-+# length is either 8*n, 8*n+1 or 8*n+2...
-+
-+my ($H0,$H1,$H2,$R0,$R1,$R2,$S1,$S2) = map("%ymm$_",(0..5,16,17));
-+my ($D0lo,$D0hi,$D1lo,$D1hi,$D2lo,$D2hi) = map("%ymm$_",(18..23));
-+my ($T0,$T1,$T2,$T3,$mask44,$mask42,$tmp,$PAD) = map("%ymm$_",(24..31));
-+my ($RR0,$RR1,$RR2,$SS1,$SS2) = map("%ymm$_",(6..10));
-+
-+$code.=<<___;
-+.type	poly1305_blocks_vpmadd52_8x,\@function,4
-+.align	32
-+poly1305_blocks_vpmadd52_8x:
-+	shr	\$4,$len
-+	jz	.Lno_data_vpmadd52_8x		# too short
-+
-+	shl	\$40,$padbit
-+	mov	64($ctx),%r8			# peek on power of the key
-+
-+	vmovdqa64	.Lx_mask44(%rip),$mask44
-+	vmovdqa64	.Lx_mask42(%rip),$mask42
-+
-+	test	%r8,%r8				# is power value impossible?
-+	js	.Linit_vpmadd52			# if it is, then init R[4]
-+
-+	vmovq	0($ctx),%x#$H0			# load current hash value
-+	vmovq	8($ctx),%x#$H1
-+	vmovq	16($ctx),%x#$H2
-+
-+.Lblocks_vpmadd52_8x:
-+	################################################################
-+	# fist we calculate more key powers
-+
-+	vmovdqu64	128($ctx),$R2		# load 1-3-2-4 powers
-+	vmovdqu64	160($ctx),$S1
-+	vmovdqu64	64($ctx),$R0
-+	vmovdqu64	96($ctx),$R1
-+
-+	vpsllq		\$2,$R2,$S2		# S2 = R2*5*4
-+	vpaddq		$R2,$S2,$S2
-+	vpsllq		\$2,$S2,$S2
-+
-+	vpbroadcastq	%x#$R2,$RR2		# broadcast 4th power
-+	vpbroadcastq	%x#$R0,$RR0
-+	vpbroadcastq	%x#$R1,$RR1
-+
-+	vpxorq		$D0lo,$D0lo,$D0lo
-+	vpmadd52luq	$RR2,$S1,$D0lo
-+	vpxorq		$D0hi,$D0hi,$D0hi
-+	vpmadd52huq	$RR2,$S1,$D0hi
-+	vpxorq		$D1lo,$D1lo,$D1lo
-+	vpmadd52luq	$RR2,$S2,$D1lo
-+	vpxorq		$D1hi,$D1hi,$D1hi
-+	vpmadd52huq	$RR2,$S2,$D1hi
-+	vpxorq		$D2lo,$D2lo,$D2lo
-+	vpmadd52luq	$RR2,$R0,$D2lo
-+	vpxorq		$D2hi,$D2hi,$D2hi
-+	vpmadd52huq	$RR2,$R0,$D2hi
-+
-+	vpmadd52luq	$RR0,$R0,$D0lo
-+	vpmadd52huq	$RR0,$R0,$D0hi
-+	vpmadd52luq	$RR0,$R1,$D1lo
-+	vpmadd52huq	$RR0,$R1,$D1hi
-+	vpmadd52luq	$RR0,$R2,$D2lo
-+	vpmadd52huq	$RR0,$R2,$D2hi
-+
-+	vpmadd52luq	$RR1,$S2,$D0lo
-+	vpmadd52huq	$RR1,$S2,$D0hi
-+	vpmadd52luq	$RR1,$R0,$D1lo
-+	vpmadd52huq	$RR1,$R0,$D1hi
-+	vpmadd52luq	$RR1,$R1,$D2lo
-+	vpmadd52huq	$RR1,$R1,$D2hi
-+
-+	################################################################
-+	# partial reduction
-+	vpsrlq		\$44,$D0lo,$tmp
-+	vpsllq		\$8,$D0hi,$D0hi
-+	vpandq		$mask44,$D0lo,$RR0
-+	vpaddq		$tmp,$D0hi,$D0hi
-+
-+	vpaddq		$D0hi,$D1lo,$D1lo
-+
-+	vpsrlq		\$44,$D1lo,$tmp
-+	vpsllq		\$8,$D1hi,$D1hi
-+	vpandq		$mask44,$D1lo,$RR1
-+	vpaddq		$tmp,$D1hi,$D1hi
-+
-+	vpaddq		$D1hi,$D2lo,$D2lo
-+
-+	vpsrlq		\$42,$D2lo,$tmp
-+	vpsllq		\$10,$D2hi,$D2hi
-+	vpandq		$mask42,$D2lo,$RR2
-+	vpaddq		$tmp,$D2hi,$D2hi
-+
-+	vpaddq		$D2hi,$RR0,$RR0
-+	vpsllq		\$2,$D2hi,$D2hi
-+
-+	vpaddq		$D2hi,$RR0,$RR0
-+
-+	vpsrlq		\$44,$RR0,$tmp		# additional step
-+	vpandq		$mask44,$RR0,$RR0
-+
-+	vpaddq		$tmp,$RR1,$RR1
-+
-+	################################################################
-+	# At this point Rx holds 1324 powers, RRx - 5768, and the goal
-+	# is 15263748, which reflects how data is loaded...
-+
-+	vpunpcklqdq	$R2,$RR2,$T2		# 3748
-+	vpunpckhqdq	$R2,$RR2,$R2		# 1526
-+	vpunpcklqdq	$R0,$RR0,$T0
-+	vpunpckhqdq	$R0,$RR0,$R0
-+	vpunpcklqdq	$R1,$RR1,$T1
-+	vpunpckhqdq	$R1,$RR1,$R1
-+___
-+######## switch to %zmm
-+map(s/%y/%z/, $H0,$H1,$H2,$R0,$R1,$R2,$S1,$S2);
-+map(s/%y/%z/, $D0lo,$D0hi,$D1lo,$D1hi,$D2lo,$D2hi);
-+map(s/%y/%z/, $T0,$T1,$T2,$T3,$mask44,$mask42,$tmp,$PAD);
-+map(s/%y/%z/, $RR0,$RR1,$RR2,$SS1,$SS2);
-+
-+$code.=<<___;
-+	vshufi64x2	\$0x44,$R2,$T2,$RR2	# 15263748
-+	vshufi64x2	\$0x44,$R0,$T0,$RR0
-+	vshufi64x2	\$0x44,$R1,$T1,$RR1
-+
-+	vmovdqu64	16*0($inp),$T2		# load data
-+	vmovdqu64	16*4($inp),$T3
-+	lea		16*8($inp),$inp
-+
-+	vpsllq		\$2,$RR2,$SS2		# S2 = R2*5*4
-+	vpsllq		\$2,$RR1,$SS1		# S1 = R1*5*4
-+	vpaddq		$RR2,$SS2,$SS2
-+	vpaddq		$RR1,$SS1,$SS1
-+	vpsllq		\$2,$SS2,$SS2
-+	vpsllq		\$2,$SS1,$SS1
-+
-+	vpbroadcastq	$padbit,$PAD
-+	vpbroadcastq	%x#$mask44,$mask44
-+	vpbroadcastq	%x#$mask42,$mask42
-+
-+	vpbroadcastq	%x#$SS1,$S1		# broadcast 8th power
-+	vpbroadcastq	%x#$SS2,$S2
-+	vpbroadcastq	%x#$RR0,$R0
-+	vpbroadcastq	%x#$RR1,$R1
-+	vpbroadcastq	%x#$RR2,$R2
-+
-+	vpunpcklqdq	$T3,$T2,$T1		# transpose data
-+	vpunpckhqdq	$T3,$T2,$T3
-+
-+	# at this point 64-bit lanes are ordered as 73625140
-+
-+	vpsrlq		\$24,$T3,$T2		# splat the data
-+	vporq		$PAD,$T2,$T2
-+	 vpaddq		$T2,$H2,$H2		# accumulate input
-+	vpandq		$mask44,$T1,$T0
-+	vpsrlq		\$44,$T1,$T1
-+	vpsllq		\$20,$T3,$T3
-+	vporq		$T3,$T1,$T1
-+	vpandq		$mask44,$T1,$T1
-+
-+	sub		\$8,$len
-+	jz		.Ltail_vpmadd52_8x
-+	jmp		.Loop_vpmadd52_8x
-+
-+.align	32
-+.Loop_vpmadd52_8x:
-+	#vpaddq		$T2,$H2,$H2		# accumulate input
-+	vpaddq		$T0,$H0,$H0
-+	vpaddq		$T1,$H1,$H1
-+
-+	vpxorq		$D0lo,$D0lo,$D0lo
-+	vpmadd52luq	$H2,$S1,$D0lo
-+	vpxorq		$D0hi,$D0hi,$D0hi
-+	vpmadd52huq	$H2,$S1,$D0hi
-+	vpxorq		$D1lo,$D1lo,$D1lo
-+	vpmadd52luq	$H2,$S2,$D1lo
-+	vpxorq		$D1hi,$D1hi,$D1hi
-+	vpmadd52huq	$H2,$S2,$D1hi
-+	vpxorq		$D2lo,$D2lo,$D2lo
-+	vpmadd52luq	$H2,$R0,$D2lo
-+	vpxorq		$D2hi,$D2hi,$D2hi
-+	vpmadd52huq	$H2,$R0,$D2hi
-+
-+	 vmovdqu64	16*0($inp),$T2		# load data
-+	 vmovdqu64	16*4($inp),$T3
-+	 lea		16*8($inp),$inp
-+	vpmadd52luq	$H0,$R0,$D0lo
-+	vpmadd52huq	$H0,$R0,$D0hi
-+	vpmadd52luq	$H0,$R1,$D1lo
-+	vpmadd52huq	$H0,$R1,$D1hi
-+	vpmadd52luq	$H0,$R2,$D2lo
-+	vpmadd52huq	$H0,$R2,$D2hi
-+
-+	 vpunpcklqdq	$T3,$T2,$T1		# transpose data
-+	 vpunpckhqdq	$T3,$T2,$T3
-+	vpmadd52luq	$H1,$S2,$D0lo
-+	vpmadd52huq	$H1,$S2,$D0hi
-+	vpmadd52luq	$H1,$R0,$D1lo
-+	vpmadd52huq	$H1,$R0,$D1hi
-+	vpmadd52luq	$H1,$R1,$D2lo
-+	vpmadd52huq	$H1,$R1,$D2hi
-+
-+	################################################################
-+	# partial reduction (interleaved with data splat)
-+	vpsrlq		\$44,$D0lo,$tmp
-+	vpsllq		\$8,$D0hi,$D0hi
-+	vpandq		$mask44,$D0lo,$H0
-+	vpaddq		$tmp,$D0hi,$D0hi
-+
-+	 vpsrlq		\$24,$T3,$T2
-+	 vporq		$PAD,$T2,$T2
-+	vpaddq		$D0hi,$D1lo,$D1lo
-+
-+	vpsrlq		\$44,$D1lo,$tmp
-+	vpsllq		\$8,$D1hi,$D1hi
-+	vpandq		$mask44,$D1lo,$H1
-+	vpaddq		$tmp,$D1hi,$D1hi
-+
-+	 vpandq		$mask44,$T1,$T0
-+	 vpsrlq		\$44,$T1,$T1
-+	 vpsllq		\$20,$T3,$T3
-+	vpaddq		$D1hi,$D2lo,$D2lo
-+
-+	vpsrlq		\$42,$D2lo,$tmp
-+	vpsllq		\$10,$D2hi,$D2hi
-+	vpandq		$mask42,$D2lo,$H2
-+	vpaddq		$tmp,$D2hi,$D2hi
-+
-+	  vpaddq	$T2,$H2,$H2		# accumulate input
-+	vpaddq		$D2hi,$H0,$H0
-+	vpsllq		\$2,$D2hi,$D2hi
-+
-+	vpaddq		$D2hi,$H0,$H0
-+	 vporq		$T3,$T1,$T1
-+	 vpandq		$mask44,$T1,$T1
-+
-+	vpsrlq		\$44,$H0,$tmp		# additional step
-+	vpandq		$mask44,$H0,$H0
-+
-+	vpaddq		$tmp,$H1,$H1
-+
-+	sub		\$8,$len		# len-=128
-+	jnz		.Loop_vpmadd52_8x
-+
-+.Ltail_vpmadd52_8x:
-+	#vpaddq		$T2,$H2,$H2		# accumulate input
-+	vpaddq		$T0,$H0,$H0
-+	vpaddq		$T1,$H1,$H1
-+
-+	vpxorq		$D0lo,$D0lo,$D0lo
-+	vpmadd52luq	$H2,$SS1,$D0lo
-+	vpxorq		$D0hi,$D0hi,$D0hi
-+	vpmadd52huq	$H2,$SS1,$D0hi
-+	vpxorq		$D1lo,$D1lo,$D1lo
-+	vpmadd52luq	$H2,$SS2,$D1lo
-+	vpxorq		$D1hi,$D1hi,$D1hi
-+	vpmadd52huq	$H2,$SS2,$D1hi
-+	vpxorq		$D2lo,$D2lo,$D2lo
-+	vpmadd52luq	$H2,$RR0,$D2lo
-+	vpxorq		$D2hi,$D2hi,$D2hi
-+	vpmadd52huq	$H2,$RR0,$D2hi
-+
-+	vpmadd52luq	$H0,$RR0,$D0lo
-+	vpmadd52huq	$H0,$RR0,$D0hi
-+	vpmadd52luq	$H0,$RR1,$D1lo
-+	vpmadd52huq	$H0,$RR1,$D1hi
-+	vpmadd52luq	$H0,$RR2,$D2lo
-+	vpmadd52huq	$H0,$RR2,$D2hi
-+
-+	vpmadd52luq	$H1,$SS2,$D0lo
-+	vpmadd52huq	$H1,$SS2,$D0hi
-+	vpmadd52luq	$H1,$RR0,$D1lo
-+	vpmadd52huq	$H1,$RR0,$D1hi
-+	vpmadd52luq	$H1,$RR1,$D2lo
-+	vpmadd52huq	$H1,$RR1,$D2hi
-+
-+	################################################################
-+	# horizontal addition
-+
-+	mov		\$1,%eax
-+	kmovw		%eax,%k1
-+	vpsrldq		\$8,$D0lo,$T0
-+	vpsrldq		\$8,$D0hi,$H0
-+	vpsrldq		\$8,$D1lo,$T1
-+	vpsrldq		\$8,$D1hi,$H1
-+	vpaddq		$T0,$D0lo,$D0lo
-+	vpaddq		$H0,$D0hi,$D0hi
-+	vpsrldq		\$8,$D2lo,$T2
-+	vpsrldq		\$8,$D2hi,$H2
-+	vpaddq		$T1,$D1lo,$D1lo
-+	vpaddq		$H1,$D1hi,$D1hi
-+	 vpermq		\$0x2,$D0lo,$T0
-+	 vpermq		\$0x2,$D0hi,$H0
-+	vpaddq		$T2,$D2lo,$D2lo
-+	vpaddq		$H2,$D2hi,$D2hi
-+
-+	vpermq		\$0x2,$D1lo,$T1
-+	vpermq		\$0x2,$D1hi,$H1
-+	vpaddq		$T0,$D0lo,$D0lo
-+	vpaddq		$H0,$D0hi,$D0hi
-+	vpermq		\$0x2,$D2lo,$T2
-+	vpermq		\$0x2,$D2hi,$H2
-+	vpaddq		$T1,$D1lo,$D1lo
-+	vpaddq		$H1,$D1hi,$D1hi
-+	 vextracti64x4	\$1,$D0lo,%y#$T0
-+	 vextracti64x4	\$1,$D0hi,%y#$H0
-+	vpaddq		$T2,$D2lo,$D2lo
-+	vpaddq		$H2,$D2hi,$D2hi
-+
-+	vextracti64x4	\$1,$D1lo,%y#$T1
-+	vextracti64x4	\$1,$D1hi,%y#$H1
-+	vextracti64x4	\$1,$D2lo,%y#$T2
-+	vextracti64x4	\$1,$D2hi,%y#$H2
-+___
-+######## switch back to %ymm
-+map(s/%z/%y/, $H0,$H1,$H2,$R0,$R1,$R2,$S1,$S2);
-+map(s/%z/%y/, $D0lo,$D0hi,$D1lo,$D1hi,$D2lo,$D2hi);
-+map(s/%z/%y/, $T0,$T1,$T2,$T3,$mask44,$mask42,$tmp,$PAD);
-+
-+$code.=<<___;
-+	vpaddq		$T0,$D0lo,${D0lo}{%k1}{z}
-+	vpaddq		$H0,$D0hi,${D0hi}{%k1}{z}
-+	vpaddq		$T1,$D1lo,${D1lo}{%k1}{z}
-+	vpaddq		$H1,$D1hi,${D1hi}{%k1}{z}
-+	vpaddq		$T2,$D2lo,${D2lo}{%k1}{z}
-+	vpaddq		$H2,$D2hi,${D2hi}{%k1}{z}
-+
-+	################################################################
-+	# partial reduction
-+	vpsrlq		\$44,$D0lo,$tmp
-+	vpsllq		\$8,$D0hi,$D0hi
-+	vpandq		$mask44,$D0lo,$H0
-+	vpaddq		$tmp,$D0hi,$D0hi
-+
-+	vpaddq		$D0hi,$D1lo,$D1lo
-+
-+	vpsrlq		\$44,$D1lo,$tmp
-+	vpsllq		\$8,$D1hi,$D1hi
-+	vpandq		$mask44,$D1lo,$H1
-+	vpaddq		$tmp,$D1hi,$D1hi
-+
-+	vpaddq		$D1hi,$D2lo,$D2lo
-+
-+	vpsrlq		\$42,$D2lo,$tmp
-+	vpsllq		\$10,$D2hi,$D2hi
-+	vpandq		$mask42,$D2lo,$H2
-+	vpaddq		$tmp,$D2hi,$D2hi
-+
-+	vpaddq		$D2hi,$H0,$H0
-+	vpsllq		\$2,$D2hi,$D2hi
-+
-+	vpaddq		$D2hi,$H0,$H0
-+
-+	vpsrlq		\$44,$H0,$tmp		# additional step
-+	vpandq		$mask44,$H0,$H0
-+
-+	vpaddq		$tmp,$H1,$H1
-+
-+	################################################################
-+
-+	vmovq		%x#$H0,0($ctx)
-+	vmovq		%x#$H1,8($ctx)
-+	vmovq		%x#$H2,16($ctx)
-+	vzeroall
-+
-+.Lno_data_vpmadd52_8x:
-+	ret
-+.size	poly1305_blocks_vpmadd52_8x,.-poly1305_blocks_vpmadd52_8x
-+___
-+}
-+$code.=<<___;
-+.type	poly1305_emit_base2_44,\@function,3
-+.align	32
-+poly1305_emit_base2_44:
-+	mov	0($ctx),%r8	# load hash value
-+	mov	8($ctx),%r9
-+	mov	16($ctx),%r10
-+
-+	mov	%r9,%rax
-+	shr	\$20,%r9
-+	shl	\$44,%rax
-+	mov	%r10,%rcx
-+	shr	\$40,%r10
-+	shl	\$24,%rcx
-+
-+	add	%rax,%r8
-+	adc	%rcx,%r9
-+	adc	\$0,%r10
-+
-+	mov	%r8,%rax
-+	add	\$5,%r8		# compare to modulus
-+	mov	%r9,%rcx
-+	adc	\$0,%r9
-+	adc	\$0,%r10
-+	shr	\$2,%r10	# did 130-bit value overflow?
-+	cmovnz	%r8,%rax
-+	cmovnz	%r9,%rcx
-+
-+	add	0($nonce),%rax	# accumulate nonce
-+	adc	8($nonce),%rcx
-+	mov	%rax,0($mac)	# write result
-+	mov	%rcx,8($mac)
-+
-+	ret
-+.size	poly1305_emit_base2_44,.-poly1305_emit_base2_44
-+___
-+}	}	}
-+$code.=<<___;
-+.align	64
-+.Lconst:
-+.Lmask24:
-+.long	0x0ffffff,0,0x0ffffff,0,0x0ffffff,0,0x0ffffff,0
-+.L129:
-+.long	`1<<24`,0,`1<<24`,0,`1<<24`,0,`1<<24`,0
-+.Lmask26:
-+.long	0x3ffffff,0,0x3ffffff,0,0x3ffffff,0,0x3ffffff,0
-+.Lpermd_avx2:
-+.long	2,2,2,3,2,0,2,1
-+.Lpermd_avx512:
-+.long	0,0,0,1, 0,2,0,3, 0,4,0,5, 0,6,0,7
-+
-+.L2_44_inp_permd:
-+.long	0,1,1,2,2,3,7,7
-+.L2_44_inp_shift:
-+.quad	0,12,24,64
-+.L2_44_mask:
-+.quad	0xfffffffffff,0xfffffffffff,0x3ffffffffff,0xffffffffffffffff
-+.L2_44_shift_rgt:
-+.quad	44,44,42,64
-+.L2_44_shift_lft:
-+.quad	8,8,10,64
-+
-+.align	64
-+.Lx_mask44:
-+.quad	0xfffffffffff,0xfffffffffff,0xfffffffffff,0xfffffffffff
-+.quad	0xfffffffffff,0xfffffffffff,0xfffffffffff,0xfffffffffff
-+.Lx_mask42:
-+.quad	0x3ffffffffff,0x3ffffffffff,0x3ffffffffff,0x3ffffffffff
-+.quad	0x3ffffffffff,0x3ffffffffff,0x3ffffffffff,0x3ffffffffff
-+___
-+}
-+$code.=<<___;
-+.asciz	"Poly1305 for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
-+.align	16
-+___
-+
-+{	# chacha20-poly1305 helpers
-+my ($out,$inp,$otp,$len)=$win64 ? ("%rcx","%rdx","%r8", "%r9") :  # Win64 order
-+                                  ("%rdi","%rsi","%rdx","%rcx");  # Unix order
-+$code.=<<___;
-+.globl	xor128_encrypt_n_pad
-+.type	xor128_encrypt_n_pad,\@abi-omnipotent
-+.align	16
-+xor128_encrypt_n_pad:
-+	sub	$otp,$inp
-+	sub	$otp,$out
-+	mov	$len,%r10		# put len aside
-+	shr	\$4,$len		# len / 16
-+	jz	.Ltail_enc
-+	nop
-+.Loop_enc_xmm:
-+	movdqu	($inp,$otp),%xmm0
-+	pxor	($otp),%xmm0
-+	movdqu	%xmm0,($out,$otp)
-+	movdqa	%xmm0,($otp)
-+	lea	16($otp),$otp
-+	dec	$len
-+	jnz	.Loop_enc_xmm
-+
-+	and	\$15,%r10		# len % 16
-+	jz	.Ldone_enc
-+
-+.Ltail_enc:
-+	mov	\$16,$len
-+	sub	%r10,$len
-+	xor	%eax,%eax
-+.Loop_enc_byte:
-+	mov	($inp,$otp),%al
-+	xor	($otp),%al
-+	mov	%al,($out,$otp)
-+	mov	%al,($otp)
-+	lea	1($otp),$otp
-+	dec	%r10
-+	jnz	.Loop_enc_byte
-+
-+	xor	%eax,%eax
-+.Loop_enc_pad:
-+	mov	%al,($otp)
-+	lea	1($otp),$otp
-+	dec	$len
-+	jnz	.Loop_enc_pad
-+
-+.Ldone_enc:
-+	mov	$otp,%rax
-+	ret
-+.size	xor128_encrypt_n_pad,.-xor128_encrypt_n_pad
-+
-+.globl	xor128_decrypt_n_pad
-+.type	xor128_decrypt_n_pad,\@abi-omnipotent
-+.align	16
-+xor128_decrypt_n_pad:
-+	sub	$otp,$inp
-+	sub	$otp,$out
-+	mov	$len,%r10		# put len aside
-+	shr	\$4,$len		# len / 16
-+	jz	.Ltail_dec
-+	nop
-+.Loop_dec_xmm:
-+	movdqu	($inp,$otp),%xmm0
-+	movdqa	($otp),%xmm1
-+	pxor	%xmm0,%xmm1
-+	movdqu	%xmm1,($out,$otp)
-+	movdqa	%xmm0,($otp)
-+	lea	16($otp),$otp
-+	dec	$len
-+	jnz	.Loop_dec_xmm
-+
-+	pxor	%xmm1,%xmm1
-+	and	\$15,%r10		# len % 16
-+	jz	.Ldone_dec
-+
-+.Ltail_dec:
-+	mov	\$16,$len
-+	sub	%r10,$len
-+	xor	%eax,%eax
-+	xor	%r11,%r11
-+.Loop_dec_byte:
-+	mov	($inp,$otp),%r11b
-+	mov	($otp),%al
-+	xor	%r11b,%al
-+	mov	%al,($out,$otp)
-+	mov	%r11b,($otp)
-+	lea	1($otp),$otp
-+	dec	%r10
-+	jnz	.Loop_dec_byte
-+
-+	xor	%eax,%eax
-+.Loop_dec_pad:
-+	mov	%al,($otp)
-+	lea	1($otp),$otp
-+	dec	$len
-+	jnz	.Loop_dec_pad
-+
-+.Ldone_dec:
-+	mov	$otp,%rax
-+	ret
-+.size	xor128_decrypt_n_pad,.-xor128_decrypt_n_pad
-+___
-+}
-+
-+# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
-+#		CONTEXT *context,DISPATCHER_CONTEXT *disp)
-+if ($win64) {
-+$rec="%rcx";
-+$frame="%rdx";
-+$context="%r8";
-+$disp="%r9";
-+
-+$code.=<<___;
-+.extern	__imp_RtlVirtualUnwind
-+.type	se_handler,\@abi-omnipotent
-+.align	16
-+se_handler:
-+	push	%rsi
-+	push	%rdi
-+	push	%rbx
-+	push	%rbp
-+	push	%r12
-+	push	%r13
-+	push	%r14
-+	push	%r15
-+	pushfq
-+	sub	\$64,%rsp
-+
-+	mov	120($context),%rax	# pull context->Rax
-+	mov	248($context),%rbx	# pull context->Rip
-+
-+	mov	8($disp),%rsi		# disp->ImageBase
-+	mov	56($disp),%r11		# disp->HandlerData
-+
-+	mov	0(%r11),%r10d		# HandlerData[0]
-+	lea	(%rsi,%r10),%r10	# prologue label
-+	cmp	%r10,%rbx		# context->Rip<.Lprologue
-+	jb	.Lcommon_seh_tail
-+
-+	mov	152($context),%rax	# pull context->Rsp
-+
-+	mov	4(%r11),%r10d		# HandlerData[1]
-+	lea	(%rsi,%r10),%r10	# epilogue label
-+	cmp	%r10,%rbx		# context->Rip>=.Lepilogue
-+	jae	.Lcommon_seh_tail
-+
-+	lea	48(%rax),%rax
-+
-+	mov	-8(%rax),%rbx
-+	mov	-16(%rax),%rbp
-+	mov	-24(%rax),%r12
-+	mov	-32(%rax),%r13
-+	mov	-40(%rax),%r14
-+	mov	-48(%rax),%r15
-+	mov	%rbx,144($context)	# restore context->Rbx
-+	mov	%rbp,160($context)	# restore context->Rbp
-+	mov	%r12,216($context)	# restore context->R12
-+	mov	%r13,224($context)	# restore context->R13
-+	mov	%r14,232($context)	# restore context->R14
-+	mov	%r15,240($context)	# restore context->R14
-+
-+	jmp	.Lcommon_seh_tail
-+.size	se_handler,.-se_handler
-+
-+.type	avx_handler,\@abi-omnipotent
-+.align	16
-+avx_handler:
-+	push	%rsi
-+	push	%rdi
-+	push	%rbx
-+	push	%rbp
-+	push	%r12
-+	push	%r13
-+	push	%r14
-+	push	%r15
-+	pushfq
-+	sub	\$64,%rsp
-+
-+	mov	120($context),%rax	# pull context->Rax
-+	mov	248($context),%rbx	# pull context->Rip
-+
-+	mov	8($disp),%rsi		# disp->ImageBase
-+	mov	56($disp),%r11		# disp->HandlerData
-+
-+	mov	0(%r11),%r10d		# HandlerData[0]
-+	lea	(%rsi,%r10),%r10	# prologue label
-+	cmp	%r10,%rbx		# context->Rip<prologue label
-+	jb	.Lcommon_seh_tail
-+
-+	mov	152($context),%rax	# pull context->Rsp
-+
-+	mov	4(%r11),%r10d		# HandlerData[1]
-+	lea	(%rsi,%r10),%r10	# epilogue label
-+	cmp	%r10,%rbx		# context->Rip>=epilogue label
-+	jae	.Lcommon_seh_tail
-+
-+	mov	208($context),%rax	# pull context->R11
-+
-+	lea	0x50(%rax),%rsi
-+	lea	0xf8(%rax),%rax
-+	lea	512($context),%rdi	# &context.Xmm6
-+	mov	\$20,%ecx
-+	.long	0xa548f3fc		# cld; rep movsq
-+
-+.Lcommon_seh_tail:
-+	mov	8(%rax),%rdi
-+	mov	16(%rax),%rsi
-+	mov	%rax,152($context)	# restore context->Rsp
-+	mov	%rsi,168($context)	# restore context->Rsi
-+	mov	%rdi,176($context)	# restore context->Rdi
-+
-+	mov	40($disp),%rdi		# disp->ContextRecord
-+	mov	$context,%rsi		# context
-+	mov	\$154,%ecx		# sizeof(CONTEXT)
-+	.long	0xa548f3fc		# cld; rep movsq
-+
-+	mov	$disp,%rsi
-+	xor	%rcx,%rcx		# arg1, UNW_FLAG_NHANDLER
-+	mov	8(%rsi),%rdx		# arg2, disp->ImageBase
-+	mov	0(%rsi),%r8		# arg3, disp->ControlPc
-+	mov	16(%rsi),%r9		# arg4, disp->FunctionEntry
-+	mov	40(%rsi),%r10		# disp->ContextRecord
-+	lea	56(%rsi),%r11		# &disp->HandlerData
-+	lea	24(%rsi),%r12		# &disp->EstablisherFrame
-+	mov	%r10,32(%rsp)		# arg5
-+	mov	%r11,40(%rsp)		# arg6
-+	mov	%r12,48(%rsp)		# arg7
-+	mov	%rcx,56(%rsp)		# arg8, (NULL)
-+	call	*__imp_RtlVirtualUnwind(%rip)
-+
-+	mov	\$1,%eax		# ExceptionContinueSearch
-+	add	\$64,%rsp
-+	popfq
-+	pop	%r15
-+	pop	%r14
-+	pop	%r13
-+	pop	%r12
-+	pop	%rbp
-+	pop	%rbx
-+	pop	%rdi
-+	pop	%rsi
-+	ret
-+.size	avx_handler,.-avx_handler
-+
-+.section	.pdata
-+.align	4
-+	.rva	.LSEH_begin_poly1305_init
-+	.rva	.LSEH_end_poly1305_init
-+	.rva	.LSEH_info_poly1305_init
-+
-+	.rva	.LSEH_begin_poly1305_blocks
-+	.rva	.LSEH_end_poly1305_blocks
-+	.rva	.LSEH_info_poly1305_blocks
-+
-+	.rva	.LSEH_begin_poly1305_emit
-+	.rva	.LSEH_end_poly1305_emit
-+	.rva	.LSEH_info_poly1305_emit
-+___
-+$code.=<<___ if ($avx);
-+	.rva	.LSEH_begin_poly1305_blocks_avx
-+	.rva	.Lbase2_64_avx
-+	.rva	.LSEH_info_poly1305_blocks_avx_1
-+
-+	.rva	.Lbase2_64_avx
-+	.rva	.Leven_avx
-+	.rva	.LSEH_info_poly1305_blocks_avx_2
-+
-+	.rva	.Leven_avx
-+	.rva	.LSEH_end_poly1305_blocks_avx
-+	.rva	.LSEH_info_poly1305_blocks_avx_3
-+
-+	.rva	.LSEH_begin_poly1305_emit_avx
-+	.rva	.LSEH_end_poly1305_emit_avx
-+	.rva	.LSEH_info_poly1305_emit_avx
-+___
-+$code.=<<___ if ($avx>1);
-+	.rva	.LSEH_begin_poly1305_blocks_avx2
-+	.rva	.Lbase2_64_avx2
-+	.rva	.LSEH_info_poly1305_blocks_avx2_1
-+
-+	.rva	.Lbase2_64_avx2
-+	.rva	.Leven_avx2
-+	.rva	.LSEH_info_poly1305_blocks_avx2_2
-+
-+	.rva	.Leven_avx2
-+	.rva	.LSEH_end_poly1305_blocks_avx2
-+	.rva	.LSEH_info_poly1305_blocks_avx2_3
-+___
-+$code.=<<___ if ($avx>2);
-+	.rva	.LSEH_begin_poly1305_blocks_avx512
-+	.rva	.LSEH_end_poly1305_blocks_avx512
-+	.rva	.LSEH_info_poly1305_blocks_avx512
-+___
-+$code.=<<___;
-+.section	.xdata
-+.align	8
-+.LSEH_info_poly1305_init:
-+	.byte	9,0,0,0
-+	.rva	se_handler
-+	.rva	.LSEH_begin_poly1305_init,.LSEH_begin_poly1305_init
-+
-+.LSEH_info_poly1305_blocks:
-+	.byte	9,0,0,0
-+	.rva	se_handler
-+	.rva	.Lblocks_body,.Lblocks_epilogue
-+
-+.LSEH_info_poly1305_emit:
-+	.byte	9,0,0,0
-+	.rva	se_handler
-+	.rva	.LSEH_begin_poly1305_emit,.LSEH_begin_poly1305_emit
-+___
-+$code.=<<___ if ($avx);
-+.LSEH_info_poly1305_blocks_avx_1:
-+	.byte	9,0,0,0
-+	.rva	se_handler
-+	.rva	.Lblocks_avx_body,.Lblocks_avx_epilogue		# HandlerData[]
-+
-+.LSEH_info_poly1305_blocks_avx_2:
-+	.byte	9,0,0,0
-+	.rva	se_handler
-+	.rva	.Lbase2_64_avx_body,.Lbase2_64_avx_epilogue	# HandlerData[]
-+
-+.LSEH_info_poly1305_blocks_avx_3:
-+	.byte	9,0,0,0
-+	.rva	avx_handler
-+	.rva	.Ldo_avx_body,.Ldo_avx_epilogue			# HandlerData[]
-+
-+.LSEH_info_poly1305_emit_avx:
-+	.byte	9,0,0,0
-+	.rva	se_handler
-+	.rva	.LSEH_begin_poly1305_emit_avx,.LSEH_begin_poly1305_emit_avx
-+___
-+$code.=<<___ if ($avx>1);
-+.LSEH_info_poly1305_blocks_avx2_1:
-+	.byte	9,0,0,0
-+	.rva	se_handler
-+	.rva	.Lblocks_avx2_body,.Lblocks_avx2_epilogue	# HandlerData[]
-+
-+.LSEH_info_poly1305_blocks_avx2_2:
-+	.byte	9,0,0,0
-+	.rva	se_handler
-+	.rva	.Lbase2_64_avx2_body,.Lbase2_64_avx2_epilogue	# HandlerData[]
-+
-+.LSEH_info_poly1305_blocks_avx2_3:
-+	.byte	9,0,0,0
-+	.rva	avx_handler
-+	.rva	.Ldo_avx2_body,.Ldo_avx2_epilogue		# HandlerData[]
-+___
-+$code.=<<___ if ($avx>2);
-+.LSEH_info_poly1305_blocks_avx512:
-+	.byte	9,0,0,0
-+	.rva	avx_handler
-+	.rva	.Ldo_avx512_body,.Ldo_avx512_epilogue		# HandlerData[]
-+___
-+}
-+
-+foreach (split('\n',$code)) {
-+	s/\`([^\`]*)\`/eval($1)/ge;
-+	s/%r([a-z]+)#d/%e$1/g;
-+	s/%r([0-9]+)#d/%r$1d/g;
-+	s/%x#%[yz]/%x/g or s/%y#%z/%y/g or s/%z#%[yz]/%z/g;
-+
-+	print $_,"\n";
-+}
-+close STDOUT;
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0043-crypto-x86-poly1305-wire-up-faster-implementations-f.patch b/target/linux/generic/backport-5.4/080-wireguard-0043-crypto-x86-poly1305-wire-up-faster-implementations-f.patch
deleted file mode 100644
index 0fc8348585..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0043-crypto-x86-poly1305-wire-up-faster-implementations-f.patch
+++ /dev/null
@@ -1,2927 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Sun, 5 Jan 2020 22:40:48 -0500
-Subject: [PATCH] crypto: x86/poly1305 - wire up faster implementations for
- kernel
-
-commit d7d7b853566254648df59f7ea27ea05952a6cfa8 upstream.
-
-These x86_64 vectorized implementations support AVX, AVX-2, and AVX512F.
-The AVX-512F implementation is disabled on Skylake, due to throttling,
-but it is quite fast on >= Cannonlake.
-
-On the left is cycle counts on a Core i7 6700HQ using the AVX-2
-codepath, comparing this implementation ("new") to the implementation in
-the current crypto api ("old"). On the right are benchmarks on a Xeon
-Gold 5120 using the AVX-512 codepath. The new implementation is faster
-on all benchmarks.
-
-        AVX-2                  AVX-512
-      ---------              -----------
-
-    size    old     new      size   old     new
-    ----    ----    ----     ----   ----    ----
-    0       70      68       0      74      70
-    16      92      90       16     96      92
-    32      134     104      32     136     106
-    48      172     120      48     184     124
-    64      218     136      64     218     138
-    80      254     158      80     260     160
-    96      298     174      96     300     176
-    112     342     192      112    342     194
-    128     388     212      128    384     212
-    144     428     228      144    420     226
-    160     466     246      160    464     248
-    176     510     264      176    504     264
-    192     550     282      192    544     282
-    208     594     302      208    582     300
-    224     628     316      224    624     318
-    240     676     334      240    662     338
-    256     716     354      256    708     358
-    272     764     374      272    748     372
-    288     802     352      288    788     358
-    304     420     366      304    422     370
-    320     428     360      320    432     364
-    336     484     378      336    486     380
-    352     426     384      352    434     390
-    368     478     400      368    480     408
-    384     488     394      384    490     398
-    400     542     408      400    542     412
-    416     486     416      416    492     426
-    432     534     430      432    538     436
-    448     544     422      448    546     432
-    464     600     438      464    600     448
-    480     540     448      480    548     456
-    496     594     464      496    594     476
-    512     602     456      512    606     470
-    528     656     476      528    656     480
-    544     600     480      544    606     498
-    560     650     494      560    652     512
-    576     664     490      576    662     508
-    592     714     508      592    716     522
-    608     656     514      608    664     538
-    624     708     532      624    710     552
-    640     716     524      640    720     516
-    656     770     536      656    772     526
-    672     716     548      672    722     544
-    688     770     562      688    768     556
-    704     774     552      704    778     556
-    720     826     568      720    832     568
-    736     768     574      736    780     584
-    752     822     592      752    826     600
-    768     830     584      768    836     560
-    784     884     602      784    888     572
-    800     828     610      800    838     588
-    816     884     628      816    884     604
-    832     888     618      832    894     598
-    848     942     632      848    946     612
-    864     884     644      864    896     628
-    880     936     660      880    942     644
-    896     948     652      896    952     608
-    912     1000    664      912    1004    616
-    928     942     676      928    954     634
-    944     994     690      944    1000    646
-    960     1002    680      960    1008    646
-    976     1054    694      976    1062    658
-    992     1002    706      992    1012    674
-    1008    1052    720      1008   1058    690
-
-This commit wires in the prior implementation from Andy, and makes the
-following changes to be suitable for kernel land.
-
-  - Some cosmetic and structural changes, like renaming labels to
-    .Lname, constants, and other Linux conventions, as well as making
-    the code easy for us to maintain moving forward.
-
-  - CPU feature checking is done in C by the glue code.
-
-  - We avoid jumping into the middle of functions, to appease objtool,
-    and instead parameterize shared code.
-
-  - We maintain frame pointers so that stack traces make sense.
-
-  - We remove the dependency on the perl xlate code, which transforms
-    the output into things that assemblers we don't care about use.
-
-Importantly, none of our changes affect the arithmetic or core code, but
-just involve the differing environment of kernel space.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
-Co-developed-by: Samuel Neves <sneves@dei.uc.pt>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/.gitignore                    |   1 +
- arch/x86/crypto/Makefile                      |  11 +-
- arch/x86/crypto/poly1305-avx2-x86_64.S        | 390 ----------
- arch/x86/crypto/poly1305-sse2-x86_64.S        | 590 ---------------
- arch/x86/crypto/poly1305-x86_64-cryptogams.pl | 682 ++++++++++--------
- arch/x86/crypto/poly1305_glue.c               | 473 +++++-------
- lib/crypto/Kconfig                            |   2 +-
- 7 files changed, 572 insertions(+), 1577 deletions(-)
- create mode 100644 arch/x86/crypto/.gitignore
- delete mode 100644 arch/x86/crypto/poly1305-avx2-x86_64.S
- delete mode 100644 arch/x86/crypto/poly1305-sse2-x86_64.S
-
---- /dev/null
-+++ b/arch/x86/crypto/.gitignore
-@@ -0,0 +1 @@
-+poly1305-x86_64.S
---- a/arch/x86/crypto/Makefile
-+++ b/arch/x86/crypto/Makefile
-@@ -73,6 +73,10 @@ aegis128-aesni-y := aegis128-aesni-asm.o
- 
- nhpoly1305-sse2-y := nh-sse2-x86_64.o nhpoly1305-sse2-glue.o
- blake2s-x86_64-y := blake2s-core.o blake2s-glue.o
-+poly1305-x86_64-y := poly1305-x86_64-cryptogams.o poly1305_glue.o
-+ifneq ($(CONFIG_CRYPTO_POLY1305_X86_64),)
-+targets += poly1305-x86_64-cryptogams.S
-+endif
- 
- ifeq ($(avx_supported),yes)
- 	camellia-aesni-avx-x86_64-y := camellia-aesni-avx-asm_64.o \
-@@ -101,10 +105,8 @@ aesni-intel-y := aesni-intel_asm.o aesni
- aesni-intel-$(CONFIG_64BIT) += aesni-intel_avx-x86_64.o aes_ctrby8_avx-x86_64.o
- ghash-clmulni-intel-y := ghash-clmulni-intel_asm.o ghash-clmulni-intel_glue.o
- sha1-ssse3-y := sha1_ssse3_asm.o sha1_ssse3_glue.o
--poly1305-x86_64-y := poly1305-sse2-x86_64.o poly1305_glue.o
- ifeq ($(avx2_supported),yes)
- sha1-ssse3-y += sha1_avx2_x86_64_asm.o
--poly1305-x86_64-y += poly1305-avx2-x86_64.o
- endif
- ifeq ($(sha1_ni_supported),yes)
- sha1-ssse3-y += sha1_ni_asm.o
-@@ -118,3 +120,8 @@ sha256-ssse3-y += sha256_ni_asm.o
- endif
- sha512-ssse3-y := sha512-ssse3-asm.o sha512-avx-asm.o sha512-avx2-asm.o sha512_ssse3_glue.o
- crct10dif-pclmul-y := crct10dif-pcl-asm_64.o crct10dif-pclmul_glue.o
-+
-+quiet_cmd_perlasm = PERLASM $@
-+      cmd_perlasm = $(PERL) $< > $@
-+$(obj)/%.S: $(src)/%.pl FORCE
-+	$(call if_changed,perlasm)
---- a/arch/x86/crypto/poly1305-avx2-x86_64.S
-+++ /dev/null
-@@ -1,390 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0-or-later */
--/*
-- * Poly1305 authenticator algorithm, RFC7539, x64 AVX2 functions
-- *
-- * Copyright (C) 2015 Martin Willi
-- */
--
--#include <linux/linkage.h>
--
--.section	.rodata.cst32.ANMASK, "aM", @progbits, 32
--.align 32
--ANMASK:	.octa 0x0000000003ffffff0000000003ffffff
--	.octa 0x0000000003ffffff0000000003ffffff
--
--.section	.rodata.cst32.ORMASK, "aM", @progbits, 32
--.align 32
--ORMASK:	.octa 0x00000000010000000000000001000000
--	.octa 0x00000000010000000000000001000000
--
--.text
--
--#define h0 0x00(%rdi)
--#define h1 0x04(%rdi)
--#define h2 0x08(%rdi)
--#define h3 0x0c(%rdi)
--#define h4 0x10(%rdi)
--#define r0 0x00(%rdx)
--#define r1 0x04(%rdx)
--#define r2 0x08(%rdx)
--#define r3 0x0c(%rdx)
--#define r4 0x10(%rdx)
--#define u0 0x00(%r8)
--#define u1 0x04(%r8)
--#define u2 0x08(%r8)
--#define u3 0x0c(%r8)
--#define u4 0x10(%r8)
--#define w0 0x18(%r8)
--#define w1 0x1c(%r8)
--#define w2 0x20(%r8)
--#define w3 0x24(%r8)
--#define w4 0x28(%r8)
--#define y0 0x30(%r8)
--#define y1 0x34(%r8)
--#define y2 0x38(%r8)
--#define y3 0x3c(%r8)
--#define y4 0x40(%r8)
--#define m %rsi
--#define hc0 %ymm0
--#define hc1 %ymm1
--#define hc2 %ymm2
--#define hc3 %ymm3
--#define hc4 %ymm4
--#define hc0x %xmm0
--#define hc1x %xmm1
--#define hc2x %xmm2
--#define hc3x %xmm3
--#define hc4x %xmm4
--#define t1 %ymm5
--#define t2 %ymm6
--#define t1x %xmm5
--#define t2x %xmm6
--#define ruwy0 %ymm7
--#define ruwy1 %ymm8
--#define ruwy2 %ymm9
--#define ruwy3 %ymm10
--#define ruwy4 %ymm11
--#define ruwy0x %xmm7
--#define ruwy1x %xmm8
--#define ruwy2x %xmm9
--#define ruwy3x %xmm10
--#define ruwy4x %xmm11
--#define svxz1 %ymm12
--#define svxz2 %ymm13
--#define svxz3 %ymm14
--#define svxz4 %ymm15
--#define d0 %r9
--#define d1 %r10
--#define d2 %r11
--#define d3 %r12
--#define d4 %r13
--
--ENTRY(poly1305_4block_avx2)
--	# %rdi: Accumulator h[5]
--	# %rsi: 64 byte input block m
--	# %rdx: Poly1305 key r[5]
--	# %rcx: Quadblock count
--	# %r8:  Poly1305 derived key r^2 u[5], r^3 w[5], r^4 y[5],
--
--	# This four-block variant uses loop unrolled block processing. It
--	# requires 4 Poly1305 keys: r, r^2, r^3 and r^4:
--	# h = (h + m) * r  =>  h = (h + m1) * r^4 + m2 * r^3 + m3 * r^2 + m4 * r
--
--	vzeroupper
--	push		%rbx
--	push		%r12
--	push		%r13
--
--	# combine r0,u0,w0,y0
--	vmovd		y0,ruwy0x
--	vmovd		w0,t1x
--	vpunpcklqdq	t1,ruwy0,ruwy0
--	vmovd		u0,t1x
--	vmovd		r0,t2x
--	vpunpcklqdq	t2,t1,t1
--	vperm2i128	$0x20,t1,ruwy0,ruwy0
--
--	# combine r1,u1,w1,y1 and s1=r1*5,v1=u1*5,x1=w1*5,z1=y1*5
--	vmovd		y1,ruwy1x
--	vmovd		w1,t1x
--	vpunpcklqdq	t1,ruwy1,ruwy1
--	vmovd		u1,t1x
--	vmovd		r1,t2x
--	vpunpcklqdq	t2,t1,t1
--	vperm2i128	$0x20,t1,ruwy1,ruwy1
--	vpslld		$2,ruwy1,svxz1
--	vpaddd		ruwy1,svxz1,svxz1
--
--	# combine r2,u2,w2,y2 and s2=r2*5,v2=u2*5,x2=w2*5,z2=y2*5
--	vmovd		y2,ruwy2x
--	vmovd		w2,t1x
--	vpunpcklqdq	t1,ruwy2,ruwy2
--	vmovd		u2,t1x
--	vmovd		r2,t2x
--	vpunpcklqdq	t2,t1,t1
--	vperm2i128	$0x20,t1,ruwy2,ruwy2
--	vpslld		$2,ruwy2,svxz2
--	vpaddd		ruwy2,svxz2,svxz2
--
--	# combine r3,u3,w3,y3 and s3=r3*5,v3=u3*5,x3=w3*5,z3=y3*5
--	vmovd		y3,ruwy3x
--	vmovd		w3,t1x
--	vpunpcklqdq	t1,ruwy3,ruwy3
--	vmovd		u3,t1x
--	vmovd		r3,t2x
--	vpunpcklqdq	t2,t1,t1
--	vperm2i128	$0x20,t1,ruwy3,ruwy3
--	vpslld		$2,ruwy3,svxz3
--	vpaddd		ruwy3,svxz3,svxz3
--
--	# combine r4,u4,w4,y4 and s4=r4*5,v4=u4*5,x4=w4*5,z4=y4*5
--	vmovd		y4,ruwy4x
--	vmovd		w4,t1x
--	vpunpcklqdq	t1,ruwy4,ruwy4
--	vmovd		u4,t1x
--	vmovd		r4,t2x
--	vpunpcklqdq	t2,t1,t1
--	vperm2i128	$0x20,t1,ruwy4,ruwy4
--	vpslld		$2,ruwy4,svxz4
--	vpaddd		ruwy4,svxz4,svxz4
--
--.Ldoblock4:
--	# hc0 = [m[48-51] & 0x3ffffff, m[32-35] & 0x3ffffff,
--	#	 m[16-19] & 0x3ffffff, m[ 0- 3] & 0x3ffffff + h0]
--	vmovd		0x00(m),hc0x
--	vmovd		0x10(m),t1x
--	vpunpcklqdq	t1,hc0,hc0
--	vmovd		0x20(m),t1x
--	vmovd		0x30(m),t2x
--	vpunpcklqdq	t2,t1,t1
--	vperm2i128	$0x20,t1,hc0,hc0
--	vpand		ANMASK(%rip),hc0,hc0
--	vmovd		h0,t1x
--	vpaddd		t1,hc0,hc0
--	# hc1 = [(m[51-54] >> 2) & 0x3ffffff, (m[35-38] >> 2) & 0x3ffffff,
--	#	 (m[19-22] >> 2) & 0x3ffffff, (m[ 3- 6] >> 2) & 0x3ffffff + h1]
--	vmovd		0x03(m),hc1x
--	vmovd		0x13(m),t1x
--	vpunpcklqdq	t1,hc1,hc1
--	vmovd		0x23(m),t1x
--	vmovd		0x33(m),t2x
--	vpunpcklqdq	t2,t1,t1
--	vperm2i128	$0x20,t1,hc1,hc1
--	vpsrld		$2,hc1,hc1
--	vpand		ANMASK(%rip),hc1,hc1
--	vmovd		h1,t1x
--	vpaddd		t1,hc1,hc1
--	# hc2 = [(m[54-57] >> 4) & 0x3ffffff, (m[38-41] >> 4) & 0x3ffffff,
--	#	 (m[22-25] >> 4) & 0x3ffffff, (m[ 6- 9] >> 4) & 0x3ffffff + h2]
--	vmovd		0x06(m),hc2x
--	vmovd		0x16(m),t1x
--	vpunpcklqdq	t1,hc2,hc2
--	vmovd		0x26(m),t1x
--	vmovd		0x36(m),t2x
--	vpunpcklqdq	t2,t1,t1
--	vperm2i128	$0x20,t1,hc2,hc2
--	vpsrld		$4,hc2,hc2
--	vpand		ANMASK(%rip),hc2,hc2
--	vmovd		h2,t1x
--	vpaddd		t1,hc2,hc2
--	# hc3 = [(m[57-60] >> 6) & 0x3ffffff, (m[41-44] >> 6) & 0x3ffffff,
--	#	 (m[25-28] >> 6) & 0x3ffffff, (m[ 9-12] >> 6) & 0x3ffffff + h3]
--	vmovd		0x09(m),hc3x
--	vmovd		0x19(m),t1x
--	vpunpcklqdq	t1,hc3,hc3
--	vmovd		0x29(m),t1x
--	vmovd		0x39(m),t2x
--	vpunpcklqdq	t2,t1,t1
--	vperm2i128	$0x20,t1,hc3,hc3
--	vpsrld		$6,hc3,hc3
--	vpand		ANMASK(%rip),hc3,hc3
--	vmovd		h3,t1x
--	vpaddd		t1,hc3,hc3
--	# hc4 = [(m[60-63] >> 8) | (1<<24), (m[44-47] >> 8) | (1<<24),
--	#	 (m[28-31] >> 8) | (1<<24), (m[12-15] >> 8) | (1<<24) + h4]
--	vmovd		0x0c(m),hc4x
--	vmovd		0x1c(m),t1x
--	vpunpcklqdq	t1,hc4,hc4
--	vmovd		0x2c(m),t1x
--	vmovd		0x3c(m),t2x
--	vpunpcklqdq	t2,t1,t1
--	vperm2i128	$0x20,t1,hc4,hc4
--	vpsrld		$8,hc4,hc4
--	vpor		ORMASK(%rip),hc4,hc4
--	vmovd		h4,t1x
--	vpaddd		t1,hc4,hc4
--
--	# t1 = [ hc0[3] * r0, hc0[2] * u0, hc0[1] * w0, hc0[0] * y0 ]
--	vpmuludq	hc0,ruwy0,t1
--	# t1 += [ hc1[3] * s4, hc1[2] * v4, hc1[1] * x4, hc1[0] * z4 ]
--	vpmuludq	hc1,svxz4,t2
--	vpaddq		t2,t1,t1
--	# t1 += [ hc2[3] * s3, hc2[2] * v3, hc2[1] * x3, hc2[0] * z3 ]
--	vpmuludq	hc2,svxz3,t2
--	vpaddq		t2,t1,t1
--	# t1 += [ hc3[3] * s2, hc3[2] * v2, hc3[1] * x2, hc3[0] * z2 ]
--	vpmuludq	hc3,svxz2,t2
--	vpaddq		t2,t1,t1
--	# t1 += [ hc4[3] * s1, hc4[2] * v1, hc4[1] * x1, hc4[0] * z1 ]
--	vpmuludq	hc4,svxz1,t2
--	vpaddq		t2,t1,t1
--	# d0 = t1[0] + t1[1] + t[2] + t[3]
--	vpermq		$0xee,t1,t2
--	vpaddq		t2,t1,t1
--	vpsrldq		$8,t1,t2
--	vpaddq		t2,t1,t1
--	vmovq		t1x,d0
--
--	# t1 = [ hc0[3] * r1, hc0[2] * u1,hc0[1] * w1, hc0[0] * y1 ]
--	vpmuludq	hc0,ruwy1,t1
--	# t1 += [ hc1[3] * r0, hc1[2] * u0, hc1[1] * w0, hc1[0] * y0 ]
--	vpmuludq	hc1,ruwy0,t2
--	vpaddq		t2,t1,t1
--	# t1 += [ hc2[3] * s4, hc2[2] * v4, hc2[1] * x4, hc2[0] * z4 ]
--	vpmuludq	hc2,svxz4,t2
--	vpaddq		t2,t1,t1
--	# t1 += [ hc3[3] * s3, hc3[2] * v3, hc3[1] * x3, hc3[0] * z3 ]
--	vpmuludq	hc3,svxz3,t2
--	vpaddq		t2,t1,t1
--	# t1 += [ hc4[3] * s2, hc4[2] * v2, hc4[1] * x2, hc4[0] * z2 ]
--	vpmuludq	hc4,svxz2,t2
--	vpaddq		t2,t1,t1
--	# d1 = t1[0] + t1[1] + t1[3] + t1[4]
--	vpermq		$0xee,t1,t2
--	vpaddq		t2,t1,t1
--	vpsrldq		$8,t1,t2
--	vpaddq		t2,t1,t1
--	vmovq		t1x,d1
--
--	# t1 = [ hc0[3] * r2, hc0[2] * u2, hc0[1] * w2, hc0[0] * y2 ]
--	vpmuludq	hc0,ruwy2,t1
--	# t1 += [ hc1[3] * r1, hc1[2] * u1, hc1[1] * w1, hc1[0] * y1 ]
--	vpmuludq	hc1,ruwy1,t2
--	vpaddq		t2,t1,t1
--	# t1 += [ hc2[3] * r0, hc2[2] * u0, hc2[1] * w0, hc2[0] * y0 ]
--	vpmuludq	hc2,ruwy0,t2
--	vpaddq		t2,t1,t1
--	# t1 += [ hc3[3] * s4, hc3[2] * v4, hc3[1] * x4, hc3[0] * z4 ]
--	vpmuludq	hc3,svxz4,t2
--	vpaddq		t2,t1,t1
--	# t1 += [ hc4[3] * s3, hc4[2] * v3, hc4[1] * x3, hc4[0] * z3 ]
--	vpmuludq	hc4,svxz3,t2
--	vpaddq		t2,t1,t1
--	# d2 = t1[0] + t1[1] + t1[2] + t1[3]
--	vpermq		$0xee,t1,t2
--	vpaddq		t2,t1,t1
--	vpsrldq		$8,t1,t2
--	vpaddq		t2,t1,t1
--	vmovq		t1x,d2
--
--	# t1 = [ hc0[3] * r3, hc0[2] * u3, hc0[1] * w3, hc0[0] * y3 ]
--	vpmuludq	hc0,ruwy3,t1
--	# t1 += [ hc1[3] * r2, hc1[2] * u2, hc1[1] * w2, hc1[0] * y2 ]
--	vpmuludq	hc1,ruwy2,t2
--	vpaddq		t2,t1,t1
--	# t1 += [ hc2[3] * r1, hc2[2] * u1, hc2[1] * w1, hc2[0] * y1 ]
--	vpmuludq	hc2,ruwy1,t2
--	vpaddq		t2,t1,t1
--	# t1 += [ hc3[3] * r0, hc3[2] * u0, hc3[1] * w0, hc3[0] * y0 ]
--	vpmuludq	hc3,ruwy0,t2
--	vpaddq		t2,t1,t1
--	# t1 += [ hc4[3] * s4, hc4[2] * v4, hc4[1] * x4, hc4[0] * z4 ]
--	vpmuludq	hc4,svxz4,t2
--	vpaddq		t2,t1,t1
--	# d3 = t1[0] + t1[1] + t1[2] + t1[3]
--	vpermq		$0xee,t1,t2
--	vpaddq		t2,t1,t1
--	vpsrldq		$8,t1,t2
--	vpaddq		t2,t1,t1
--	vmovq		t1x,d3
--
--	# t1 = [ hc0[3] * r4, hc0[2] * u4, hc0[1] * w4, hc0[0] * y4 ]
--	vpmuludq	hc0,ruwy4,t1
--	# t1 += [ hc1[3] * r3, hc1[2] * u3, hc1[1] * w3, hc1[0] * y3 ]
--	vpmuludq	hc1,ruwy3,t2
--	vpaddq		t2,t1,t1
--	# t1 += [ hc2[3] * r2, hc2[2] * u2, hc2[1] * w2, hc2[0] * y2 ]
--	vpmuludq	hc2,ruwy2,t2
--	vpaddq		t2,t1,t1
--	# t1 += [ hc3[3] * r1, hc3[2] * u1, hc3[1] * w1, hc3[0] * y1 ]
--	vpmuludq	hc3,ruwy1,t2
--	vpaddq		t2,t1,t1
--	# t1 += [ hc4[3] * r0, hc4[2] * u0, hc4[1] * w0, hc4[0] * y0 ]
--	vpmuludq	hc4,ruwy0,t2
--	vpaddq		t2,t1,t1
--	# d4 = t1[0] + t1[1] + t1[2] + t1[3]
--	vpermq		$0xee,t1,t2
--	vpaddq		t2,t1,t1
--	vpsrldq		$8,t1,t2
--	vpaddq		t2,t1,t1
--	vmovq		t1x,d4
--
--	# Now do a partial reduction mod (2^130)-5, carrying h0 -> h1 -> h2 ->
--	# h3 -> h4 -> h0 -> h1 to get h0,h2,h3,h4 < 2^26 and h1 < 2^26 + a small
--	# amount.  Careful: we must not assume the carry bits 'd0 >> 26',
--	# 'd1 >> 26', 'd2 >> 26', 'd3 >> 26', and '(d4 >> 26) * 5' fit in 32-bit
--	# integers.  It's true in a single-block implementation, but not here.
--
--	# d1 += d0 >> 26
--	mov		d0,%rax
--	shr		$26,%rax
--	add		%rax,d1
--	# h0 = d0 & 0x3ffffff
--	mov		d0,%rbx
--	and		$0x3ffffff,%ebx
--
--	# d2 += d1 >> 26
--	mov		d1,%rax
--	shr		$26,%rax
--	add		%rax,d2
--	# h1 = d1 & 0x3ffffff
--	mov		d1,%rax
--	and		$0x3ffffff,%eax
--	mov		%eax,h1
--
--	# d3 += d2 >> 26
--	mov		d2,%rax
--	shr		$26,%rax
--	add		%rax,d3
--	# h2 = d2 & 0x3ffffff
--	mov		d2,%rax
--	and		$0x3ffffff,%eax
--	mov		%eax,h2
--
--	# d4 += d3 >> 26
--	mov		d3,%rax
--	shr		$26,%rax
--	add		%rax,d4
--	# h3 = d3 & 0x3ffffff
--	mov		d3,%rax
--	and		$0x3ffffff,%eax
--	mov		%eax,h3
--
--	# h0 += (d4 >> 26) * 5
--	mov		d4,%rax
--	shr		$26,%rax
--	lea		(%rax,%rax,4),%rax
--	add		%rax,%rbx
--	# h4 = d4 & 0x3ffffff
--	mov		d4,%rax
--	and		$0x3ffffff,%eax
--	mov		%eax,h4
--
--	# h1 += h0 >> 26
--	mov		%rbx,%rax
--	shr		$26,%rax
--	add		%eax,h1
--	# h0 = h0 & 0x3ffffff
--	andl		$0x3ffffff,%ebx
--	mov		%ebx,h0
--
--	add		$0x40,m
--	dec		%rcx
--	jnz		.Ldoblock4
--
--	vzeroupper
--	pop		%r13
--	pop		%r12
--	pop		%rbx
--	ret
--ENDPROC(poly1305_4block_avx2)
---- a/arch/x86/crypto/poly1305-sse2-x86_64.S
-+++ /dev/null
-@@ -1,590 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0-or-later */
--/*
-- * Poly1305 authenticator algorithm, RFC7539, x64 SSE2 functions
-- *
-- * Copyright (C) 2015 Martin Willi
-- */
--
--#include <linux/linkage.h>
--
--.section	.rodata.cst16.ANMASK, "aM", @progbits, 16
--.align 16
--ANMASK:	.octa 0x0000000003ffffff0000000003ffffff
--
--.section	.rodata.cst16.ORMASK, "aM", @progbits, 16
--.align 16
--ORMASK:	.octa 0x00000000010000000000000001000000
--
--.text
--
--#define h0 0x00(%rdi)
--#define h1 0x04(%rdi)
--#define h2 0x08(%rdi)
--#define h3 0x0c(%rdi)
--#define h4 0x10(%rdi)
--#define r0 0x00(%rdx)
--#define r1 0x04(%rdx)
--#define r2 0x08(%rdx)
--#define r3 0x0c(%rdx)
--#define r4 0x10(%rdx)
--#define s1 0x00(%rsp)
--#define s2 0x04(%rsp)
--#define s3 0x08(%rsp)
--#define s4 0x0c(%rsp)
--#define m %rsi
--#define h01 %xmm0
--#define h23 %xmm1
--#define h44 %xmm2
--#define t1 %xmm3
--#define t2 %xmm4
--#define t3 %xmm5
--#define t4 %xmm6
--#define mask %xmm7
--#define d0 %r8
--#define d1 %r9
--#define d2 %r10
--#define d3 %r11
--#define d4 %r12
--
--ENTRY(poly1305_block_sse2)
--	# %rdi: Accumulator h[5]
--	# %rsi: 16 byte input block m
--	# %rdx: Poly1305 key r[5]
--	# %rcx: Block count
--
--	# This single block variant tries to improve performance by doing two
--	# multiplications in parallel using SSE instructions. There is quite
--	# some quardword packing involved, hence the speedup is marginal.
--
--	push		%rbx
--	push		%r12
--	sub		$0x10,%rsp
--
--	# s1..s4 = r1..r4 * 5
--	mov		r1,%eax
--	lea		(%eax,%eax,4),%eax
--	mov		%eax,s1
--	mov		r2,%eax
--	lea		(%eax,%eax,4),%eax
--	mov		%eax,s2
--	mov		r3,%eax
--	lea		(%eax,%eax,4),%eax
--	mov		%eax,s3
--	mov		r4,%eax
--	lea		(%eax,%eax,4),%eax
--	mov		%eax,s4
--
--	movdqa		ANMASK(%rip),mask
--
--.Ldoblock:
--	# h01 = [0, h1, 0, h0]
--	# h23 = [0, h3, 0, h2]
--	# h44 = [0, h4, 0, h4]
--	movd		h0,h01
--	movd		h1,t1
--	movd		h2,h23
--	movd		h3,t2
--	movd		h4,h44
--	punpcklqdq	t1,h01
--	punpcklqdq	t2,h23
--	punpcklqdq	h44,h44
--
--	# h01 += [ (m[3-6] >> 2) & 0x3ffffff, m[0-3] & 0x3ffffff ]
--	movd		0x00(m),t1
--	movd		0x03(m),t2
--	psrld		$2,t2
--	punpcklqdq	t2,t1
--	pand		mask,t1
--	paddd		t1,h01
--	# h23 += [ (m[9-12] >> 6) & 0x3ffffff, (m[6-9] >> 4) & 0x3ffffff ]
--	movd		0x06(m),t1
--	movd		0x09(m),t2
--	psrld		$4,t1
--	psrld		$6,t2
--	punpcklqdq	t2,t1
--	pand		mask,t1
--	paddd		t1,h23
--	# h44 += [ (m[12-15] >> 8) | (1 << 24), (m[12-15] >> 8) | (1 << 24) ]
--	mov		0x0c(m),%eax
--	shr		$8,%eax
--	or		$0x01000000,%eax
--	movd		%eax,t1
--	pshufd		$0xc4,t1,t1
--	paddd		t1,h44
--
--	# t1[0] = h0 * r0 + h2 * s3
--	# t1[1] = h1 * s4 + h3 * s2
--	movd		r0,t1
--	movd		s4,t2
--	punpcklqdq	t2,t1
--	pmuludq		h01,t1
--	movd		s3,t2
--	movd		s2,t3
--	punpcklqdq	t3,t2
--	pmuludq		h23,t2
--	paddq		t2,t1
--	# t2[0] = h0 * r1 + h2 * s4
--	# t2[1] = h1 * r0 + h3 * s3
--	movd		r1,t2
--	movd		r0,t3
--	punpcklqdq	t3,t2
--	pmuludq		h01,t2
--	movd		s4,t3
--	movd		s3,t4
--	punpcklqdq	t4,t3
--	pmuludq		h23,t3
--	paddq		t3,t2
--	# t3[0] = h4 * s1
--	# t3[1] = h4 * s2
--	movd		s1,t3
--	movd		s2,t4
--	punpcklqdq	t4,t3
--	pmuludq		h44,t3
--	# d0 = t1[0] + t1[1] + t3[0]
--	# d1 = t2[0] + t2[1] + t3[1]
--	movdqa		t1,t4
--	punpcklqdq	t2,t4
--	punpckhqdq	t2,t1
--	paddq		t4,t1
--	paddq		t3,t1
--	movq		t1,d0
--	psrldq		$8,t1
--	movq		t1,d1
--
--	# t1[0] = h0 * r2 + h2 * r0
--	# t1[1] = h1 * r1 + h3 * s4
--	movd		r2,t1
--	movd		r1,t2
--	punpcklqdq 	t2,t1
--	pmuludq		h01,t1
--	movd		r0,t2
--	movd		s4,t3
--	punpcklqdq	t3,t2
--	pmuludq		h23,t2
--	paddq		t2,t1
--	# t2[0] = h0 * r3 + h2 * r1
--	# t2[1] = h1 * r2 + h3 * r0
--	movd		r3,t2
--	movd		r2,t3
--	punpcklqdq	t3,t2
--	pmuludq		h01,t2
--	movd		r1,t3
--	movd		r0,t4
--	punpcklqdq	t4,t3
--	pmuludq		h23,t3
--	paddq		t3,t2
--	# t3[0] = h4 * s3
--	# t3[1] = h4 * s4
--	movd		s3,t3
--	movd		s4,t4
--	punpcklqdq	t4,t3
--	pmuludq		h44,t3
--	# d2 = t1[0] + t1[1] + t3[0]
--	# d3 = t2[0] + t2[1] + t3[1]
--	movdqa		t1,t4
--	punpcklqdq	t2,t4
--	punpckhqdq	t2,t1
--	paddq		t4,t1
--	paddq		t3,t1
--	movq		t1,d2
--	psrldq		$8,t1
--	movq		t1,d3
--
--	# t1[0] = h0 * r4 + h2 * r2
--	# t1[1] = h1 * r3 + h3 * r1
--	movd		r4,t1
--	movd		r3,t2
--	punpcklqdq	t2,t1
--	pmuludq		h01,t1
--	movd		r2,t2
--	movd		r1,t3
--	punpcklqdq	t3,t2
--	pmuludq		h23,t2
--	paddq		t2,t1
--	# t3[0] = h4 * r0
--	movd		r0,t3
--	pmuludq		h44,t3
--	# d4 = t1[0] + t1[1] + t3[0]
--	movdqa		t1,t4
--	psrldq		$8,t4
--	paddq		t4,t1
--	paddq		t3,t1
--	movq		t1,d4
--
--	# d1 += d0 >> 26
--	mov		d0,%rax
--	shr		$26,%rax
--	add		%rax,d1
--	# h0 = d0 & 0x3ffffff
--	mov		d0,%rbx
--	and		$0x3ffffff,%ebx
--
--	# d2 += d1 >> 26
--	mov		d1,%rax
--	shr		$26,%rax
--	add		%rax,d2
--	# h1 = d1 & 0x3ffffff
--	mov		d1,%rax
--	and		$0x3ffffff,%eax
--	mov		%eax,h1
--
--	# d3 += d2 >> 26
--	mov		d2,%rax
--	shr		$26,%rax
--	add		%rax,d3
--	# h2 = d2 & 0x3ffffff
--	mov		d2,%rax
--	and		$0x3ffffff,%eax
--	mov		%eax,h2
--
--	# d4 += d3 >> 26
--	mov		d3,%rax
--	shr		$26,%rax
--	add		%rax,d4
--	# h3 = d3 & 0x3ffffff
--	mov		d3,%rax
--	and		$0x3ffffff,%eax
--	mov		%eax,h3
--
--	# h0 += (d4 >> 26) * 5
--	mov		d4,%rax
--	shr		$26,%rax
--	lea		(%rax,%rax,4),%rax
--	add		%rax,%rbx
--	# h4 = d4 & 0x3ffffff
--	mov		d4,%rax
--	and		$0x3ffffff,%eax
--	mov		%eax,h4
--
--	# h1 += h0 >> 26
--	mov		%rbx,%rax
--	shr		$26,%rax
--	add		%eax,h1
--	# h0 = h0 & 0x3ffffff
--	andl		$0x3ffffff,%ebx
--	mov		%ebx,h0
--
--	add		$0x10,m
--	dec		%rcx
--	jnz		.Ldoblock
--
--	# Zeroing of key material
--	mov		%rcx,0x00(%rsp)
--	mov		%rcx,0x08(%rsp)
--
--	add		$0x10,%rsp
--	pop		%r12
--	pop		%rbx
--	ret
--ENDPROC(poly1305_block_sse2)
--
--
--#define u0 0x00(%r8)
--#define u1 0x04(%r8)
--#define u2 0x08(%r8)
--#define u3 0x0c(%r8)
--#define u4 0x10(%r8)
--#define hc0 %xmm0
--#define hc1 %xmm1
--#define hc2 %xmm2
--#define hc3 %xmm5
--#define hc4 %xmm6
--#define ru0 %xmm7
--#define ru1 %xmm8
--#define ru2 %xmm9
--#define ru3 %xmm10
--#define ru4 %xmm11
--#define sv1 %xmm12
--#define sv2 %xmm13
--#define sv3 %xmm14
--#define sv4 %xmm15
--#undef d0
--#define d0 %r13
--
--ENTRY(poly1305_2block_sse2)
--	# %rdi: Accumulator h[5]
--	# %rsi: 16 byte input block m
--	# %rdx: Poly1305 key r[5]
--	# %rcx: Doubleblock count
--	# %r8:  Poly1305 derived key r^2 u[5]
--
--	# This two-block variant further improves performance by using loop
--	# unrolled block processing. This is more straight forward and does
--	# less byte shuffling, but requires a second Poly1305 key r^2:
--	# h = (h + m) * r    =>    h = (h + m1) * r^2 + m2 * r
--
--	push		%rbx
--	push		%r12
--	push		%r13
--
--	# combine r0,u0
--	movd		u0,ru0
--	movd		r0,t1
--	punpcklqdq	t1,ru0
--
--	# combine r1,u1 and s1=r1*5,v1=u1*5
--	movd		u1,ru1
--	movd		r1,t1
--	punpcklqdq	t1,ru1
--	movdqa		ru1,sv1
--	pslld		$2,sv1
--	paddd		ru1,sv1
--
--	# combine r2,u2 and s2=r2*5,v2=u2*5
--	movd		u2,ru2
--	movd		r2,t1
--	punpcklqdq	t1,ru2
--	movdqa		ru2,sv2
--	pslld		$2,sv2
--	paddd		ru2,sv2
--
--	# combine r3,u3 and s3=r3*5,v3=u3*5
--	movd		u3,ru3
--	movd		r3,t1
--	punpcklqdq	t1,ru3
--	movdqa		ru3,sv3
--	pslld		$2,sv3
--	paddd		ru3,sv3
--
--	# combine r4,u4 and s4=r4*5,v4=u4*5
--	movd		u4,ru4
--	movd		r4,t1
--	punpcklqdq	t1,ru4
--	movdqa		ru4,sv4
--	pslld		$2,sv4
--	paddd		ru4,sv4
--
--.Ldoblock2:
--	# hc0 = [ m[16-19] & 0x3ffffff, h0 + m[0-3] & 0x3ffffff ]
--	movd		0x00(m),hc0
--	movd		0x10(m),t1
--	punpcklqdq	t1,hc0
--	pand		ANMASK(%rip),hc0
--	movd		h0,t1
--	paddd		t1,hc0
--	# hc1 = [ (m[19-22] >> 2) & 0x3ffffff, h1 + (m[3-6] >> 2) & 0x3ffffff ]
--	movd		0x03(m),hc1
--	movd		0x13(m),t1
--	punpcklqdq	t1,hc1
--	psrld		$2,hc1
--	pand		ANMASK(%rip),hc1
--	movd		h1,t1
--	paddd		t1,hc1
--	# hc2 = [ (m[22-25] >> 4) & 0x3ffffff, h2 + (m[6-9] >> 4) & 0x3ffffff ]
--	movd		0x06(m),hc2
--	movd		0x16(m),t1
--	punpcklqdq	t1,hc2
--	psrld		$4,hc2
--	pand		ANMASK(%rip),hc2
--	movd		h2,t1
--	paddd		t1,hc2
--	# hc3 = [ (m[25-28] >> 6) & 0x3ffffff, h3 + (m[9-12] >> 6) & 0x3ffffff ]
--	movd		0x09(m),hc3
--	movd		0x19(m),t1
--	punpcklqdq	t1,hc3
--	psrld		$6,hc3
--	pand		ANMASK(%rip),hc3
--	movd		h3,t1
--	paddd		t1,hc3
--	# hc4 = [ (m[28-31] >> 8) | (1<<24), h4 + (m[12-15] >> 8) | (1<<24) ]
--	movd		0x0c(m),hc4
--	movd		0x1c(m),t1
--	punpcklqdq	t1,hc4
--	psrld		$8,hc4
--	por		ORMASK(%rip),hc4
--	movd		h4,t1
--	paddd		t1,hc4
--
--	# t1 = [ hc0[1] * r0, hc0[0] * u0 ]
--	movdqa		ru0,t1
--	pmuludq		hc0,t1
--	# t1 += [ hc1[1] * s4, hc1[0] * v4 ]
--	movdqa		sv4,t2
--	pmuludq		hc1,t2
--	paddq		t2,t1
--	# t1 += [ hc2[1] * s3, hc2[0] * v3 ]
--	movdqa		sv3,t2
--	pmuludq		hc2,t2
--	paddq		t2,t1
--	# t1 += [ hc3[1] * s2, hc3[0] * v2 ]
--	movdqa		sv2,t2
--	pmuludq		hc3,t2
--	paddq		t2,t1
--	# t1 += [ hc4[1] * s1, hc4[0] * v1 ]
--	movdqa		sv1,t2
--	pmuludq		hc4,t2
--	paddq		t2,t1
--	# d0 = t1[0] + t1[1]
--	movdqa		t1,t2
--	psrldq		$8,t2
--	paddq		t2,t1
--	movq		t1,d0
--
--	# t1 = [ hc0[1] * r1, hc0[0] * u1 ]
--	movdqa		ru1,t1
--	pmuludq		hc0,t1
--	# t1 += [ hc1[1] * r0, hc1[0] * u0 ]
--	movdqa		ru0,t2
--	pmuludq		hc1,t2
--	paddq		t2,t1
--	# t1 += [ hc2[1] * s4, hc2[0] * v4 ]
--	movdqa		sv4,t2
--	pmuludq		hc2,t2
--	paddq		t2,t1
--	# t1 += [ hc3[1] * s3, hc3[0] * v3 ]
--	movdqa		sv3,t2
--	pmuludq		hc3,t2
--	paddq		t2,t1
--	# t1 += [ hc4[1] * s2, hc4[0] * v2 ]
--	movdqa		sv2,t2
--	pmuludq		hc4,t2
--	paddq		t2,t1
--	# d1 = t1[0] + t1[1]
--	movdqa		t1,t2
--	psrldq		$8,t2
--	paddq		t2,t1
--	movq		t1,d1
--
--	# t1 = [ hc0[1] * r2, hc0[0] * u2 ]
--	movdqa		ru2,t1
--	pmuludq		hc0,t1
--	# t1 += [ hc1[1] * r1, hc1[0] * u1 ]
--	movdqa		ru1,t2
--	pmuludq		hc1,t2
--	paddq		t2,t1
--	# t1 += [ hc2[1] * r0, hc2[0] * u0 ]
--	movdqa		ru0,t2
--	pmuludq		hc2,t2
--	paddq		t2,t1
--	# t1 += [ hc3[1] * s4, hc3[0] * v4 ]
--	movdqa		sv4,t2
--	pmuludq		hc3,t2
--	paddq		t2,t1
--	# t1 += [ hc4[1] * s3, hc4[0] * v3 ]
--	movdqa		sv3,t2
--	pmuludq		hc4,t2
--	paddq		t2,t1
--	# d2 = t1[0] + t1[1]
--	movdqa		t1,t2
--	psrldq		$8,t2
--	paddq		t2,t1
--	movq		t1,d2
--
--	# t1 = [ hc0[1] * r3, hc0[0] * u3 ]
--	movdqa		ru3,t1
--	pmuludq		hc0,t1
--	# t1 += [ hc1[1] * r2, hc1[0] * u2 ]
--	movdqa		ru2,t2
--	pmuludq		hc1,t2
--	paddq		t2,t1
--	# t1 += [ hc2[1] * r1, hc2[0] * u1 ]
--	movdqa		ru1,t2
--	pmuludq		hc2,t2
--	paddq		t2,t1
--	# t1 += [ hc3[1] * r0, hc3[0] * u0 ]
--	movdqa		ru0,t2
--	pmuludq		hc3,t2
--	paddq		t2,t1
--	# t1 += [ hc4[1] * s4, hc4[0] * v4 ]
--	movdqa		sv4,t2
--	pmuludq		hc4,t2
--	paddq		t2,t1
--	# d3 = t1[0] + t1[1]
--	movdqa		t1,t2
--	psrldq		$8,t2
--	paddq		t2,t1
--	movq		t1,d3
--
--	# t1 = [ hc0[1] * r4, hc0[0] * u4 ]
--	movdqa		ru4,t1
--	pmuludq		hc0,t1
--	# t1 += [ hc1[1] * r3, hc1[0] * u3 ]
--	movdqa		ru3,t2
--	pmuludq		hc1,t2
--	paddq		t2,t1
--	# t1 += [ hc2[1] * r2, hc2[0] * u2 ]
--	movdqa		ru2,t2
--	pmuludq		hc2,t2
--	paddq		t2,t1
--	# t1 += [ hc3[1] * r1, hc3[0] * u1 ]
--	movdqa		ru1,t2
--	pmuludq		hc3,t2
--	paddq		t2,t1
--	# t1 += [ hc4[1] * r0, hc4[0] * u0 ]
--	movdqa		ru0,t2
--	pmuludq		hc4,t2
--	paddq		t2,t1
--	# d4 = t1[0] + t1[1]
--	movdqa		t1,t2
--	psrldq		$8,t2
--	paddq		t2,t1
--	movq		t1,d4
--
--	# Now do a partial reduction mod (2^130)-5, carrying h0 -> h1 -> h2 ->
--	# h3 -> h4 -> h0 -> h1 to get h0,h2,h3,h4 < 2^26 and h1 < 2^26 + a small
--	# amount.  Careful: we must not assume the carry bits 'd0 >> 26',
--	# 'd1 >> 26', 'd2 >> 26', 'd3 >> 26', and '(d4 >> 26) * 5' fit in 32-bit
--	# integers.  It's true in a single-block implementation, but not here.
--
--	# d1 += d0 >> 26
--	mov		d0,%rax
--	shr		$26,%rax
--	add		%rax,d1
--	# h0 = d0 & 0x3ffffff
--	mov		d0,%rbx
--	and		$0x3ffffff,%ebx
--
--	# d2 += d1 >> 26
--	mov		d1,%rax
--	shr		$26,%rax
--	add		%rax,d2
--	# h1 = d1 & 0x3ffffff
--	mov		d1,%rax
--	and		$0x3ffffff,%eax
--	mov		%eax,h1
--
--	# d3 += d2 >> 26
--	mov		d2,%rax
--	shr		$26,%rax
--	add		%rax,d3
--	# h2 = d2 & 0x3ffffff
--	mov		d2,%rax
--	and		$0x3ffffff,%eax
--	mov		%eax,h2
--
--	# d4 += d3 >> 26
--	mov		d3,%rax
--	shr		$26,%rax
--	add		%rax,d4
--	# h3 = d3 & 0x3ffffff
--	mov		d3,%rax
--	and		$0x3ffffff,%eax
--	mov		%eax,h3
--
--	# h0 += (d4 >> 26) * 5
--	mov		d4,%rax
--	shr		$26,%rax
--	lea		(%rax,%rax,4),%rax
--	add		%rax,%rbx
--	# h4 = d4 & 0x3ffffff
--	mov		d4,%rax
--	and		$0x3ffffff,%eax
--	mov		%eax,h4
--
--	# h1 += h0 >> 26
--	mov		%rbx,%rax
--	shr		$26,%rax
--	add		%eax,h1
--	# h0 = h0 & 0x3ffffff
--	andl		$0x3ffffff,%ebx
--	mov		%ebx,h0
--
--	add		$0x20,m
--	dec		%rcx
--	jnz		.Ldoblock2
--
--	pop		%r13
--	pop		%r12
--	pop		%rbx
--	ret
--ENDPROC(poly1305_2block_sse2)
---- a/arch/x86/crypto/poly1305-x86_64-cryptogams.pl
-+++ b/arch/x86/crypto/poly1305-x86_64-cryptogams.pl
-@@ -1,11 +1,14 @@
--#! /usr/bin/env perl
--# Copyright 2016-2018 The OpenSSL Project Authors. All Rights Reserved.
-+#!/usr/bin/env perl
-+# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
- #
--# Licensed under the OpenSSL license (the "License").  You may not use
--# this file except in compliance with the License.  You can obtain a copy
--# in the file LICENSE in the source distribution or at
--# https://www.openssl.org/source/license.html
--
-+# Copyright (C) 2017-2018 Samuel Neves <sneves@dei.uc.pt>. All Rights Reserved.
-+# Copyright (C) 2017-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+# Copyright (C) 2006-2017 CRYPTOGAMS by <appro@openssl.org>. All Rights Reserved.
-+#
-+# This code is taken from the OpenSSL project but the author, Andy Polyakov,
-+# has relicensed it under the licenses specified in the SPDX header above.
-+# The original headers, including the original license headers, are
-+# included below for completeness.
- #
- # ====================================================================
- # Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
-@@ -32,7 +35,7 @@
- # Skylake-X system performance. Since we are likely to suppress
- # AVX512F capability flag [at least on Skylake-X], conversion serves
- # as kind of "investment protection". Note that next *lake processor,
--# Cannolake, has AVX512IFMA code path to execute...
-+# Cannonlake, has AVX512IFMA code path to execute...
- #
- # Numbers are cycles per processed byte with poly1305_blocks alone,
- # measured with rdtsc at fixed clock frequency.
-@@ -68,39 +71,114 @@ $output  = shift;
- if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
- 
- $win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
-+$kernel=0; $kernel=1 if (!$flavour && !$output);
- 
--$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
--( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
--( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
--die "can't locate x86_64-xlate.pl";
--
--if (`$ENV{CC} -Wa,-v -c -o /dev/null -x assembler /dev/null 2>&1`
--		=~ /GNU assembler version ([2-9]\.[0-9]+)/) {
--	$avx = ($1>=2.19) + ($1>=2.22) + ($1>=2.25) + ($1>=2.26);
-+if (!$kernel) {
-+	$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-+	( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
-+	( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
-+	die "can't locate x86_64-xlate.pl";
-+
-+	open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
-+	*STDOUT=*OUT;
-+
-+	if (`$ENV{CC} -Wa,-v -c -o /dev/null -x assembler /dev/null 2>&1`
-+	    =~ /GNU assembler version ([2-9]\.[0-9]+)/) {
-+		$avx = ($1>=2.19) + ($1>=2.22) + ($1>=2.25);
-+	}
-+
-+	if (!$avx && $win64 && ($flavour =~ /nasm/ || $ENV{ASM} =~ /nasm/) &&
-+	    `nasm -v 2>&1` =~ /NASM version ([2-9]\.[0-9]+)(?:\.([0-9]+))?/) {
-+		$avx = ($1>=2.09) + ($1>=2.10) + ($1>=2.12);
-+		$avx += 1 if ($1==2.11 && $2>=8);
-+	}
-+
-+	if (!$avx && $win64 && ($flavour =~ /masm/ || $ENV{ASM} =~ /ml64/) &&
-+	    `ml64 2>&1` =~ /Version ([0-9]+)\./) {
-+		$avx = ($1>=10) + ($1>=11);
-+	}
-+
-+	if (!$avx && `$ENV{CC} -v 2>&1` =~ /((?:^clang|LLVM) version|.*based on LLVM) ([3-9]\.[0-9]+)/) {
-+		$avx = ($2>=3.0) + ($2>3.0);
-+	}
-+} else {
-+	$avx = 4; # The kernel uses ifdefs for this.
- }
- 
--if (!$avx && $win64 && ($flavour =~ /nasm/ || $ENV{ASM} =~ /nasm/) &&
--	   `nasm -v 2>&1` =~ /NASM version ([2-9]\.[0-9]+)(?:\.([0-9]+))?/) {
--	$avx = ($1>=2.09) + ($1>=2.10) + 2 * ($1>=2.12);
--	$avx += 2 if ($1==2.11 && $2>=8);
-+sub declare_function() {
-+	my ($name, $align, $nargs) = @_;
-+	if($kernel) {
-+		$code .= ".align $align\n";
-+		$code .= "ENTRY($name)\n";
-+		$code .= ".L$name:\n";
-+	} else {
-+		$code .= ".globl	$name\n";
-+		$code .= ".type	$name,\@function,$nargs\n";
-+		$code .= ".align	$align\n";
-+		$code .= "$name:\n";
-+	}
- }
- 
--if (!$avx && $win64 && ($flavour =~ /masm/ || $ENV{ASM} =~ /ml64/) &&
--	   `ml64 2>&1` =~ /Version ([0-9]+)\./) {
--	$avx = ($1>=10) + ($1>=12);
-+sub end_function() {
-+	my ($name) = @_;
-+	if($kernel) {
-+		$code .= "ENDPROC($name)\n";
-+	} else {
-+		$code .= ".size   $name,.-$name\n";
-+	}
- }
- 
--if (!$avx && `$ENV{CC} -v 2>&1` =~ /((?:^clang|LLVM) version|.*based on LLVM) ([3-9]\.[0-9]+)/) {
--	$avx = ($2>=3.0) + ($2>3.0);
--}
-+$code.=<<___ if $kernel;
-+#include <linux/linkage.h>
-+___
- 
--open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
--*STDOUT=*OUT;
-+if ($avx) {
-+$code.=<<___ if $kernel;
-+.section .rodata
-+___
-+$code.=<<___;
-+.align	64
-+.Lconst:
-+.Lmask24:
-+.long	0x0ffffff,0,0x0ffffff,0,0x0ffffff,0,0x0ffffff,0
-+.L129:
-+.long	`1<<24`,0,`1<<24`,0,`1<<24`,0,`1<<24`,0
-+.Lmask26:
-+.long	0x3ffffff,0,0x3ffffff,0,0x3ffffff,0,0x3ffffff,0
-+.Lpermd_avx2:
-+.long	2,2,2,3,2,0,2,1
-+.Lpermd_avx512:
-+.long	0,0,0,1, 0,2,0,3, 0,4,0,5, 0,6,0,7
-+
-+.L2_44_inp_permd:
-+.long	0,1,1,2,2,3,7,7
-+.L2_44_inp_shift:
-+.quad	0,12,24,64
-+.L2_44_mask:
-+.quad	0xfffffffffff,0xfffffffffff,0x3ffffffffff,0xffffffffffffffff
-+.L2_44_shift_rgt:
-+.quad	44,44,42,64
-+.L2_44_shift_lft:
-+.quad	8,8,10,64
-+
-+.align	64
-+.Lx_mask44:
-+.quad	0xfffffffffff,0xfffffffffff,0xfffffffffff,0xfffffffffff
-+.quad	0xfffffffffff,0xfffffffffff,0xfffffffffff,0xfffffffffff
-+.Lx_mask42:
-+.quad	0x3ffffffffff,0x3ffffffffff,0x3ffffffffff,0x3ffffffffff
-+.quad	0x3ffffffffff,0x3ffffffffff,0x3ffffffffff,0x3ffffffffff
-+___
-+}
-+$code.=<<___ if (!$kernel);
-+.asciz	"Poly1305 for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
-+.align	16
-+___
- 
- my ($ctx,$inp,$len,$padbit)=("%rdi","%rsi","%rdx","%rcx");
- my ($mac,$nonce)=($inp,$len);	# *_emit arguments
--my ($d1,$d2,$d3, $r0,$r1,$s1)=map("%r$_",(8..13));
--my ($h0,$h1,$h2)=("%r14","%rbx","%rbp");
-+my ($d1,$d2,$d3, $r0,$r1,$s1)=("%r8","%r9","%rdi","%r11","%r12","%r13");
-+my ($h0,$h1,$h2)=("%r14","%rbx","%r10");
- 
- sub poly1305_iteration {
- # input:	copy of $r1 in %rax, $h0-$h2, $r0-$r1
-@@ -155,19 +233,19 @@ ___
- 
- $code.=<<___;
- .text
--
-+___
-+$code.=<<___ if (!$kernel);
- .extern	OPENSSL_ia32cap_P
- 
--.globl	poly1305_init
--.hidden	poly1305_init
--.globl	poly1305_blocks
--.hidden	poly1305_blocks
--.globl	poly1305_emit
--.hidden	poly1305_emit
--
--.type	poly1305_init,\@function,3
--.align	32
--poly1305_init:
-+.globl	poly1305_init_x86_64
-+.hidden	poly1305_init_x86_64
-+.globl	poly1305_blocks_x86_64
-+.hidden	poly1305_blocks_x86_64
-+.globl	poly1305_emit_x86_64
-+.hidden	poly1305_emit_x86_64
-+___
-+&declare_function("poly1305_init_x86_64", 32, 3);
-+$code.=<<___;
- 	xor	%rax,%rax
- 	mov	%rax,0($ctx)		# initialize hash value
- 	mov	%rax,8($ctx)
-@@ -175,11 +253,12 @@ poly1305_init:
- 
- 	cmp	\$0,$inp
- 	je	.Lno_key
--
--	lea	poly1305_blocks(%rip),%r10
--	lea	poly1305_emit(%rip),%r11
- ___
--$code.=<<___	if ($avx);
-+$code.=<<___ if (!$kernel);
-+	lea	poly1305_blocks_x86_64(%rip),%r10
-+	lea	poly1305_emit_x86_64(%rip),%r11
-+___
-+$code.=<<___	if (!$kernel && $avx);
- 	mov	OPENSSL_ia32cap_P+4(%rip),%r9
- 	lea	poly1305_blocks_avx(%rip),%rax
- 	lea	poly1305_emit_avx(%rip),%rcx
-@@ -187,12 +266,12 @@ $code.=<<___	if ($avx);
- 	cmovc	%rax,%r10
- 	cmovc	%rcx,%r11
- ___
--$code.=<<___	if ($avx>1);
-+$code.=<<___	if (!$kernel && $avx>1);
- 	lea	poly1305_blocks_avx2(%rip),%rax
- 	bt	\$`5+32`,%r9		# AVX2?
- 	cmovc	%rax,%r10
- ___
--$code.=<<___	if ($avx>3);
-+$code.=<<___	if (!$kernel && $avx>3);
- 	mov	\$`(1<<31|1<<21|1<<16)`,%rax
- 	shr	\$32,%r9
- 	and	%rax,%r9
-@@ -207,11 +286,11 @@ $code.=<<___;
- 	mov	%rax,24($ctx)
- 	mov	%rcx,32($ctx)
- ___
--$code.=<<___	if ($flavour !~ /elf32/);
-+$code.=<<___	if (!$kernel && $flavour !~ /elf32/);
- 	mov	%r10,0(%rdx)
- 	mov	%r11,8(%rdx)
- ___
--$code.=<<___	if ($flavour =~ /elf32/);
-+$code.=<<___	if (!$kernel && $flavour =~ /elf32/);
- 	mov	%r10d,0(%rdx)
- 	mov	%r11d,4(%rdx)
- ___
-@@ -219,11 +298,11 @@ $code.=<<___;
- 	mov	\$1,%eax
- .Lno_key:
- 	ret
--.size	poly1305_init,.-poly1305_init
-+___
-+&end_function("poly1305_init_x86_64");
- 
--.type	poly1305_blocks,\@function,4
--.align	32
--poly1305_blocks:
-+&declare_function("poly1305_blocks_x86_64", 32, 4);
-+$code.=<<___;
- .cfi_startproc
- .Lblocks:
- 	shr	\$4,$len
-@@ -231,8 +310,6 @@ poly1305_blocks:
- 
- 	push	%rbx
- .cfi_push	%rbx
--	push	%rbp
--.cfi_push	%rbp
- 	push	%r12
- .cfi_push	%r12
- 	push	%r13
-@@ -241,6 +318,8 @@ poly1305_blocks:
- .cfi_push	%r14
- 	push	%r15
- .cfi_push	%r15
-+	push	$ctx
-+.cfi_push	$ctx
- .Lblocks_body:
- 
- 	mov	$len,%r15		# reassign $len
-@@ -265,26 +344,29 @@ poly1305_blocks:
- 	lea	16($inp),$inp
- 	adc	$padbit,$h2
- ___
-+
- 	&poly1305_iteration();
-+
- $code.=<<___;
- 	mov	$r1,%rax
- 	dec	%r15			# len-=16
- 	jnz	.Loop
- 
-+	mov	0(%rsp),$ctx
-+.cfi_restore	$ctx
-+
- 	mov	$h0,0($ctx)		# store hash value
- 	mov	$h1,8($ctx)
- 	mov	$h2,16($ctx)
- 
--	mov	0(%rsp),%r15
-+	mov	8(%rsp),%r15
- .cfi_restore	%r15
--	mov	8(%rsp),%r14
-+	mov	16(%rsp),%r14
- .cfi_restore	%r14
--	mov	16(%rsp),%r13
-+	mov	24(%rsp),%r13
- .cfi_restore	%r13
--	mov	24(%rsp),%r12
-+	mov	32(%rsp),%r12
- .cfi_restore	%r12
--	mov	32(%rsp),%rbp
--.cfi_restore	%rbp
- 	mov	40(%rsp),%rbx
- .cfi_restore	%rbx
- 	lea	48(%rsp),%rsp
-@@ -293,11 +375,11 @@ $code.=<<___;
- .Lblocks_epilogue:
- 	ret
- .cfi_endproc
--.size	poly1305_blocks,.-poly1305_blocks
-+___
-+&end_function("poly1305_blocks_x86_64");
- 
--.type	poly1305_emit,\@function,3
--.align	32
--poly1305_emit:
-+&declare_function("poly1305_emit_x86_64", 32, 3);
-+$code.=<<___;
- .Lemit:
- 	mov	0($ctx),%r8	# load hash value
- 	mov	8($ctx),%r9
-@@ -318,10 +400,14 @@ poly1305_emit:
- 	mov	%rcx,8($mac)
- 
- 	ret
--.size	poly1305_emit,.-poly1305_emit
- ___
-+&end_function("poly1305_emit_x86_64");
- if ($avx) {
- 
-+if($kernel) {
-+	$code .= "#ifdef CONFIG_AS_AVX\n";
-+}
-+
- ########################################################################
- # Layout of opaque area is following.
- #
-@@ -342,15 +428,19 @@ $code.=<<___;
- .type	__poly1305_block,\@abi-omnipotent
- .align	32
- __poly1305_block:
-+	push $ctx
- ___
- 	&poly1305_iteration();
- $code.=<<___;
-+	pop $ctx
- 	ret
- .size	__poly1305_block,.-__poly1305_block
- 
- .type	__poly1305_init_avx,\@abi-omnipotent
- .align	32
- __poly1305_init_avx:
-+	push %rbp
-+	mov %rsp,%rbp
- 	mov	$r0,$h0
- 	mov	$r1,$h1
- 	xor	$h2,$h2
-@@ -507,12 +597,13 @@ __poly1305_init_avx:
- 	mov	$d1#d,`16*8+8-64`($ctx)
- 
- 	lea	-48-64($ctx),$ctx	# size [de-]optimization
-+	pop %rbp
- 	ret
- .size	__poly1305_init_avx,.-__poly1305_init_avx
-+___
- 
--.type	poly1305_blocks_avx,\@function,4
--.align	32
--poly1305_blocks_avx:
-+&declare_function("poly1305_blocks_avx", 32, 4);
-+$code.=<<___;
- .cfi_startproc
- 	mov	20($ctx),%r8d		# is_base2_26
- 	cmp	\$128,$len
-@@ -532,10 +623,11 @@ poly1305_blocks_avx:
- 	test	\$31,$len
- 	jz	.Leven_avx
- 
--	push	%rbx
--.cfi_push	%rbx
- 	push	%rbp
- .cfi_push	%rbp
-+	mov 	%rsp,%rbp
-+	push	%rbx
-+.cfi_push	%rbx
- 	push	%r12
- .cfi_push	%r12
- 	push	%r13
-@@ -645,20 +737,18 @@ poly1305_blocks_avx:
- 	mov	$h2#d,16($ctx)
- .align	16
- .Ldone_avx:
--	mov	0(%rsp),%r15
-+	pop 		%r15
- .cfi_restore	%r15
--	mov	8(%rsp),%r14
-+	pop 		%r14
- .cfi_restore	%r14
--	mov	16(%rsp),%r13
-+	pop 		%r13
- .cfi_restore	%r13
--	mov	24(%rsp),%r12
-+	pop 		%r12
- .cfi_restore	%r12
--	mov	32(%rsp),%rbp
--.cfi_restore	%rbp
--	mov	40(%rsp),%rbx
-+	pop 		%rbx
- .cfi_restore	%rbx
--	lea	48(%rsp),%rsp
--.cfi_adjust_cfa_offset	-48
-+	pop 		%rbp
-+.cfi_restore	%rbp
- .Lno_data_avx:
- .Lblocks_avx_epilogue:
- 	ret
-@@ -667,10 +757,11 @@ poly1305_blocks_avx:
- .align	32
- .Lbase2_64_avx:
- .cfi_startproc
--	push	%rbx
--.cfi_push	%rbx
- 	push	%rbp
- .cfi_push	%rbp
-+	mov 	%rsp,%rbp
-+	push	%rbx
-+.cfi_push	%rbx
- 	push	%r12
- .cfi_push	%r12
- 	push	%r13
-@@ -736,22 +827,18 @@ poly1305_blocks_avx:
- 
- .Lproceed_avx:
- 	mov	%r15,$len
--
--	mov	0(%rsp),%r15
-+	pop 		%r15
- .cfi_restore	%r15
--	mov	8(%rsp),%r14
-+	pop 		%r14
- .cfi_restore	%r14
--	mov	16(%rsp),%r13
-+	pop 		%r13
- .cfi_restore	%r13
--	mov	24(%rsp),%r12
-+	pop 		%r12
- .cfi_restore	%r12
--	mov	32(%rsp),%rbp
--.cfi_restore	%rbp
--	mov	40(%rsp),%rbx
-+	pop 		%rbx
- .cfi_restore	%rbx
--	lea	48(%rsp),%rax
--	lea	48(%rsp),%rsp
--.cfi_adjust_cfa_offset	-48
-+	pop 		%rbp
-+.cfi_restore	%rbp
- .Lbase2_64_avx_epilogue:
- 	jmp	.Ldo_avx
- .cfi_endproc
-@@ -768,8 +855,11 @@ poly1305_blocks_avx:
- .Ldo_avx:
- ___
- $code.=<<___	if (!$win64);
-+	lea		8(%rsp),%r10
-+.cfi_def_cfa_register	%r10
-+	and		\$-32,%rsp
-+	sub		\$-8,%rsp
- 	lea		-0x58(%rsp),%r11
--.cfi_def_cfa		%r11,0x60
- 	sub		\$0x178,%rsp
- ___
- $code.=<<___	if ($win64);
-@@ -1361,18 +1451,18 @@ $code.=<<___	if ($win64);
- .Ldo_avx_epilogue:
- ___
- $code.=<<___	if (!$win64);
--	lea		0x58(%r11),%rsp
--.cfi_def_cfa		%rsp,8
-+	lea		-8(%r10),%rsp
-+.cfi_def_cfa_register	%rsp
- ___
- $code.=<<___;
- 	vzeroupper
- 	ret
- .cfi_endproc
--.size	poly1305_blocks_avx,.-poly1305_blocks_avx
-+___
-+&end_function("poly1305_blocks_avx");
- 
--.type	poly1305_emit_avx,\@function,3
--.align	32
--poly1305_emit_avx:
-+&declare_function("poly1305_emit_avx", 32, 3);
-+$code.=<<___;
- 	cmpl	\$0,20($ctx)	# is_base2_26?
- 	je	.Lemit
- 
-@@ -1423,41 +1513,51 @@ poly1305_emit_avx:
- 	mov	%rcx,8($mac)
- 
- 	ret
--.size	poly1305_emit_avx,.-poly1305_emit_avx
- ___
-+&end_function("poly1305_emit_avx");
-+
-+if ($kernel) {
-+	$code .= "#endif\n";
-+}
- 
- if ($avx>1) {
-+
-+if ($kernel) {
-+	$code .= "#ifdef CONFIG_AS_AVX2\n";
-+}
-+
- my ($H0,$H1,$H2,$H3,$H4, $MASK, $T4,$T0,$T1,$T2,$T3, $D0,$D1,$D2,$D3,$D4) =
-     map("%ymm$_",(0..15));
- my $S4=$MASK;
- 
-+sub poly1305_blocks_avxN {
-+	my ($avx512) = @_;
-+	my $suffix = $avx512 ? "_avx512" : "";
- $code.=<<___;
--.type	poly1305_blocks_avx2,\@function,4
--.align	32
--poly1305_blocks_avx2:
- .cfi_startproc
- 	mov	20($ctx),%r8d		# is_base2_26
- 	cmp	\$128,$len
--	jae	.Lblocks_avx2
-+	jae	.Lblocks_avx2$suffix
- 	test	%r8d,%r8d
- 	jz	.Lblocks
- 
--.Lblocks_avx2:
-+.Lblocks_avx2$suffix:
- 	and	\$-16,$len
--	jz	.Lno_data_avx2
-+	jz	.Lno_data_avx2$suffix
- 
- 	vzeroupper
- 
- 	test	%r8d,%r8d
--	jz	.Lbase2_64_avx2
-+	jz	.Lbase2_64_avx2$suffix
- 
- 	test	\$63,$len
--	jz	.Leven_avx2
-+	jz	.Leven_avx2$suffix
- 
--	push	%rbx
--.cfi_push	%rbx
- 	push	%rbp
- .cfi_push	%rbp
-+	mov 	%rsp,%rbp
-+	push	%rbx
-+.cfi_push	%rbx
- 	push	%r12
- .cfi_push	%r12
- 	push	%r13
-@@ -1466,7 +1566,7 @@ poly1305_blocks_avx2:
- .cfi_push	%r14
- 	push	%r15
- .cfi_push	%r15
--.Lblocks_avx2_body:
-+.Lblocks_avx2_body$suffix:
- 
- 	mov	$len,%r15		# reassign $len
- 
-@@ -1513,7 +1613,7 @@ poly1305_blocks_avx2:
- 	shr	\$2,$s1
- 	add	$r1,$s1			# s1 = r1 + (r1 >> 2)
- 
--.Lbase2_26_pre_avx2:
-+.Lbase2_26_pre_avx2$suffix:
- 	add	0($inp),$h0		# accumulate input
- 	adc	8($inp),$h1
- 	lea	16($inp),$inp
-@@ -1524,10 +1624,10 @@ poly1305_blocks_avx2:
- 	mov	$r1,%rax
- 
- 	test	\$63,%r15
--	jnz	.Lbase2_26_pre_avx2
-+	jnz	.Lbase2_26_pre_avx2$suffix
- 
- 	test	$padbit,$padbit		# if $padbit is zero,
--	jz	.Lstore_base2_64_avx2	# store hash in base 2^64 format
-+	jz	.Lstore_base2_64_avx2$suffix	# store hash in base 2^64 format
- 
- 	################################# base 2^64 -> base 2^26
- 	mov	$h0,%rax
-@@ -1548,57 +1648,56 @@ poly1305_blocks_avx2:
- 	or	$r1,$h2			# h[4]
- 
- 	test	%r15,%r15
--	jz	.Lstore_base2_26_avx2
-+	jz	.Lstore_base2_26_avx2$suffix
- 
- 	vmovd	%rax#d,%x#$H0
- 	vmovd	%rdx#d,%x#$H1
- 	vmovd	$h0#d,%x#$H2
- 	vmovd	$h1#d,%x#$H3
- 	vmovd	$h2#d,%x#$H4
--	jmp	.Lproceed_avx2
-+	jmp	.Lproceed_avx2$suffix
- 
- .align	32
--.Lstore_base2_64_avx2:
-+.Lstore_base2_64_avx2$suffix:
- 	mov	$h0,0($ctx)
- 	mov	$h1,8($ctx)
- 	mov	$h2,16($ctx)		# note that is_base2_26 is zeroed
--	jmp	.Ldone_avx2
-+	jmp	.Ldone_avx2$suffix
- 
- .align	16
--.Lstore_base2_26_avx2:
-+.Lstore_base2_26_avx2$suffix:
- 	mov	%rax#d,0($ctx)		# store hash value base 2^26
- 	mov	%rdx#d,4($ctx)
- 	mov	$h0#d,8($ctx)
- 	mov	$h1#d,12($ctx)
- 	mov	$h2#d,16($ctx)
- .align	16
--.Ldone_avx2:
--	mov	0(%rsp),%r15
-+.Ldone_avx2$suffix:
-+	pop 		%r15
- .cfi_restore	%r15
--	mov	8(%rsp),%r14
-+	pop 		%r14
- .cfi_restore	%r14
--	mov	16(%rsp),%r13
-+	pop 		%r13
- .cfi_restore	%r13
--	mov	24(%rsp),%r12
-+	pop 		%r12
- .cfi_restore	%r12
--	mov	32(%rsp),%rbp
--.cfi_restore	%rbp
--	mov	40(%rsp),%rbx
-+	pop 		%rbx
- .cfi_restore	%rbx
--	lea	48(%rsp),%rsp
--.cfi_adjust_cfa_offset	-48
--.Lno_data_avx2:
--.Lblocks_avx2_epilogue:
-+	pop 		%rbp
-+.cfi_restore 	%rbp
-+.Lno_data_avx2$suffix:
-+.Lblocks_avx2_epilogue$suffix:
- 	ret
- .cfi_endproc
- 
- .align	32
--.Lbase2_64_avx2:
-+.Lbase2_64_avx2$suffix:
- .cfi_startproc
--	push	%rbx
--.cfi_push	%rbx
- 	push	%rbp
- .cfi_push	%rbp
-+	mov 	%rsp,%rbp
-+	push	%rbx
-+.cfi_push	%rbx
- 	push	%r12
- .cfi_push	%r12
- 	push	%r13
-@@ -1607,7 +1706,7 @@ poly1305_blocks_avx2:
- .cfi_push	%r14
- 	push	%r15
- .cfi_push	%r15
--.Lbase2_64_avx2_body:
-+.Lbase2_64_avx2_body$suffix:
- 
- 	mov	$len,%r15		# reassign $len
- 
-@@ -1624,9 +1723,9 @@ poly1305_blocks_avx2:
- 	add	$r1,$s1			# s1 = r1 + (r1 >> 2)
- 
- 	test	\$63,$len
--	jz	.Linit_avx2
-+	jz	.Linit_avx2$suffix
- 
--.Lbase2_64_pre_avx2:
-+.Lbase2_64_pre_avx2$suffix:
- 	add	0($inp),$h0		# accumulate input
- 	adc	8($inp),$h1
- 	lea	16($inp),$inp
-@@ -1637,9 +1736,9 @@ poly1305_blocks_avx2:
- 	mov	$r1,%rax
- 
- 	test	\$63,%r15
--	jnz	.Lbase2_64_pre_avx2
-+	jnz	.Lbase2_64_pre_avx2$suffix
- 
--.Linit_avx2:
-+.Linit_avx2$suffix:
- 	################################# base 2^64 -> base 2^26
- 	mov	$h0,%rax
- 	mov	$h0,%rdx
-@@ -1667,69 +1766,77 @@ poly1305_blocks_avx2:
- 
- 	call	__poly1305_init_avx
- 
--.Lproceed_avx2:
-+.Lproceed_avx2$suffix:
- 	mov	%r15,$len			# restore $len
--	mov	OPENSSL_ia32cap_P+8(%rip),%r10d
-+___
-+$code.=<<___ if (!$kernel);
-+	mov	OPENSSL_ia32cap_P+8(%rip),%r9d
- 	mov	\$`(1<<31|1<<30|1<<16)`,%r11d
--
--	mov	0(%rsp),%r15
-+___
-+$code.=<<___;
-+	pop 		%r15
- .cfi_restore	%r15
--	mov	8(%rsp),%r14
-+	pop 		%r14
- .cfi_restore	%r14
--	mov	16(%rsp),%r13
-+	pop 		%r13
- .cfi_restore	%r13
--	mov	24(%rsp),%r12
-+	pop 		%r12
- .cfi_restore	%r12
--	mov	32(%rsp),%rbp
--.cfi_restore	%rbp
--	mov	40(%rsp),%rbx
-+	pop 		%rbx
- .cfi_restore	%rbx
--	lea	48(%rsp),%rax
--	lea	48(%rsp),%rsp
--.cfi_adjust_cfa_offset	-48
--.Lbase2_64_avx2_epilogue:
--	jmp	.Ldo_avx2
-+	pop 		%rbp
-+.cfi_restore 	%rbp
-+.Lbase2_64_avx2_epilogue$suffix:
-+	jmp	.Ldo_avx2$suffix
- .cfi_endproc
- 
- .align	32
--.Leven_avx2:
-+.Leven_avx2$suffix:
- .cfi_startproc
--	mov		OPENSSL_ia32cap_P+8(%rip),%r10d
-+___
-+$code.=<<___ if (!$kernel);
-+	mov		OPENSSL_ia32cap_P+8(%rip),%r9d
-+___
-+$code.=<<___;
- 	vmovd		4*0($ctx),%x#$H0	# load hash value base 2^26
- 	vmovd		4*1($ctx),%x#$H1
- 	vmovd		4*2($ctx),%x#$H2
- 	vmovd		4*3($ctx),%x#$H3
- 	vmovd		4*4($ctx),%x#$H4
- 
--.Ldo_avx2:
-+.Ldo_avx2$suffix:
- ___
--$code.=<<___		if ($avx>2);
-+$code.=<<___		if (!$kernel && $avx>2);
- 	cmp		\$512,$len
- 	jb		.Lskip_avx512
--	and		%r11d,%r10d
--	test		\$`1<<16`,%r10d		# check for AVX512F
-+	and		%r11d,%r9d
-+	test		\$`1<<16`,%r9d		# check for AVX512F
- 	jnz		.Lblocks_avx512
--.Lskip_avx512:
-+.Lskip_avx512$suffix:
-+___
-+$code.=<<___ if ($avx > 2 && $avx512 && $kernel);
-+	cmp		\$512,$len
-+	jae		.Lblocks_avx512
- ___
- $code.=<<___	if (!$win64);
--	lea		-8(%rsp),%r11
--.cfi_def_cfa		%r11,16
-+	lea		8(%rsp),%r10
-+.cfi_def_cfa_register	%r10
- 	sub		\$0x128,%rsp
- ___
- $code.=<<___	if ($win64);
--	lea		-0xf8(%rsp),%r11
-+	lea		8(%rsp),%r10
- 	sub		\$0x1c8,%rsp
--	vmovdqa		%xmm6,0x50(%r11)
--	vmovdqa		%xmm7,0x60(%r11)
--	vmovdqa		%xmm8,0x70(%r11)
--	vmovdqa		%xmm9,0x80(%r11)
--	vmovdqa		%xmm10,0x90(%r11)
--	vmovdqa		%xmm11,0xa0(%r11)
--	vmovdqa		%xmm12,0xb0(%r11)
--	vmovdqa		%xmm13,0xc0(%r11)
--	vmovdqa		%xmm14,0xd0(%r11)
--	vmovdqa		%xmm15,0xe0(%r11)
--.Ldo_avx2_body:
-+	vmovdqa		%xmm6,-0xb0(%r10)
-+	vmovdqa		%xmm7,-0xa0(%r10)
-+	vmovdqa		%xmm8,-0x90(%r10)
-+	vmovdqa		%xmm9,-0x80(%r10)
-+	vmovdqa		%xmm10,-0x70(%r10)
-+	vmovdqa		%xmm11,-0x60(%r10)
-+	vmovdqa		%xmm12,-0x50(%r10)
-+	vmovdqa		%xmm13,-0x40(%r10)
-+	vmovdqa		%xmm14,-0x30(%r10)
-+	vmovdqa		%xmm15,-0x20(%r10)
-+.Ldo_avx2_body$suffix:
- ___
- $code.=<<___;
- 	lea		.Lconst(%rip),%rcx
-@@ -1794,11 +1901,11 @@ $code.=<<___;
- 
- 	vpaddq		$H2,$T2,$H2		# accumulate input
- 	sub		\$64,$len
--	jz		.Ltail_avx2
--	jmp		.Loop_avx2
-+	jz		.Ltail_avx2$suffix
-+	jmp		.Loop_avx2$suffix
- 
- .align	32
--.Loop_avx2:
-+.Loop_avx2$suffix:
- 	################################################################
- 	# ((inp[0]*r^4+inp[4])*r^4+inp[ 8])*r^4
- 	# ((inp[1]*r^4+inp[5])*r^4+inp[ 9])*r^3
-@@ -1946,10 +2053,10 @@ $code.=<<___;
- 	 vpor		32(%rcx),$T4,$T4	# padbit, yes, always
- 
- 	sub		\$64,$len
--	jnz		.Loop_avx2
-+	jnz		.Loop_avx2$suffix
- 
- 	.byte		0x66,0x90
--.Ltail_avx2:
-+.Ltail_avx2$suffix:
- 	################################################################
- 	# while above multiplications were by r^4 in all lanes, in last
- 	# iteration we multiply least significant lane by r^4 and most
-@@ -2087,37 +2194,29 @@ $code.=<<___;
- 	vmovd		%x#$H4,`4*4-48-64`($ctx)
- ___
- $code.=<<___	if ($win64);
--	vmovdqa		0x50(%r11),%xmm6
--	vmovdqa		0x60(%r11),%xmm7
--	vmovdqa		0x70(%r11),%xmm8
--	vmovdqa		0x80(%r11),%xmm9
--	vmovdqa		0x90(%r11),%xmm10
--	vmovdqa		0xa0(%r11),%xmm11
--	vmovdqa		0xb0(%r11),%xmm12
--	vmovdqa		0xc0(%r11),%xmm13
--	vmovdqa		0xd0(%r11),%xmm14
--	vmovdqa		0xe0(%r11),%xmm15
--	lea		0xf8(%r11),%rsp
--.Ldo_avx2_epilogue:
-+	vmovdqa		-0xb0(%r10),%xmm6
-+	vmovdqa		-0xa0(%r10),%xmm7
-+	vmovdqa		-0x90(%r10),%xmm8
-+	vmovdqa		-0x80(%r10),%xmm9
-+	vmovdqa		-0x70(%r10),%xmm10
-+	vmovdqa		-0x60(%r10),%xmm11
-+	vmovdqa		-0x50(%r10),%xmm12
-+	vmovdqa		-0x40(%r10),%xmm13
-+	vmovdqa		-0x30(%r10),%xmm14
-+	vmovdqa		-0x20(%r10),%xmm15
-+	lea		-8(%r10),%rsp
-+.Ldo_avx2_epilogue$suffix:
- ___
- $code.=<<___	if (!$win64);
--	lea		8(%r11),%rsp
--.cfi_def_cfa		%rsp,8
-+	lea		-8(%r10),%rsp
-+.cfi_def_cfa_register	%rsp
- ___
- $code.=<<___;
- 	vzeroupper
- 	ret
- .cfi_endproc
--.size	poly1305_blocks_avx2,.-poly1305_blocks_avx2
- ___
--#######################################################################
--if ($avx>2) {
--# On entry we have input length divisible by 64. But since inner loop
--# processes 128 bytes per iteration, cases when length is not divisible
--# by 128 are handled by passing tail 64 bytes to .Ltail_avx2. For this
--# reason stack layout is kept identical to poly1305_blocks_avx2. If not
--# for this tail, we wouldn't have to even allocate stack frame...
--
-+if($avx > 2 && $avx512) {
- my ($R0,$R1,$R2,$R3,$R4, $S1,$S2,$S3,$S4) = map("%zmm$_",(16..24));
- my ($M0,$M1,$M2,$M3,$M4) = map("%zmm$_",(25..29));
- my $PADBIT="%zmm30";
-@@ -2128,32 +2227,29 @@ map(s/%y/%z/,($H0,$H1,$H2,$H3,$H4));
- map(s/%y/%z/,($MASK));
- 
- $code.=<<___;
--.type	poly1305_blocks_avx512,\@function,4
--.align	32
--poly1305_blocks_avx512:
- .cfi_startproc
- .Lblocks_avx512:
- 	mov		\$15,%eax
- 	kmovw		%eax,%k2
- ___
- $code.=<<___	if (!$win64);
--	lea		-8(%rsp),%r11
--.cfi_def_cfa		%r11,16
-+	lea		8(%rsp),%r10
-+.cfi_def_cfa_register	%r10
- 	sub		\$0x128,%rsp
- ___
- $code.=<<___	if ($win64);
--	lea		-0xf8(%rsp),%r11
-+	lea		8(%rsp),%r10
- 	sub		\$0x1c8,%rsp
--	vmovdqa		%xmm6,0x50(%r11)
--	vmovdqa		%xmm7,0x60(%r11)
--	vmovdqa		%xmm8,0x70(%r11)
--	vmovdqa		%xmm9,0x80(%r11)
--	vmovdqa		%xmm10,0x90(%r11)
--	vmovdqa		%xmm11,0xa0(%r11)
--	vmovdqa		%xmm12,0xb0(%r11)
--	vmovdqa		%xmm13,0xc0(%r11)
--	vmovdqa		%xmm14,0xd0(%r11)
--	vmovdqa		%xmm15,0xe0(%r11)
-+	vmovdqa		%xmm6,-0xb0(%r10)
-+	vmovdqa		%xmm7,-0xa0(%r10)
-+	vmovdqa		%xmm8,-0x90(%r10)
-+	vmovdqa		%xmm9,-0x80(%r10)
-+	vmovdqa		%xmm10,-0x70(%r10)
-+	vmovdqa		%xmm11,-0x60(%r10)
-+	vmovdqa		%xmm12,-0x50(%r10)
-+	vmovdqa		%xmm13,-0x40(%r10)
-+	vmovdqa		%xmm14,-0x30(%r10)
-+	vmovdqa		%xmm15,-0x20(%r10)
- .Ldo_avx512_body:
- ___
- $code.=<<___;
-@@ -2679,7 +2775,7 @@ $code.=<<___;
- 
- 	lea		0x90(%rsp),%rax		# size optimization for .Ltail_avx2
- 	add		\$64,$len
--	jnz		.Ltail_avx2
-+	jnz		.Ltail_avx2$suffix
- 
- 	vpsubq		$T2,$H2,$H2		# undo input accumulation
- 	vmovd		%x#$H0,`4*0-48-64`($ctx)# save partially reduced
-@@ -2690,29 +2786,61 @@ $code.=<<___;
- 	vzeroall
- ___
- $code.=<<___	if ($win64);
--	movdqa		0x50(%r11),%xmm6
--	movdqa		0x60(%r11),%xmm7
--	movdqa		0x70(%r11),%xmm8
--	movdqa		0x80(%r11),%xmm9
--	movdqa		0x90(%r11),%xmm10
--	movdqa		0xa0(%r11),%xmm11
--	movdqa		0xb0(%r11),%xmm12
--	movdqa		0xc0(%r11),%xmm13
--	movdqa		0xd0(%r11),%xmm14
--	movdqa		0xe0(%r11),%xmm15
--	lea		0xf8(%r11),%rsp
-+	movdqa		-0xb0(%r10),%xmm6
-+	movdqa		-0xa0(%r10),%xmm7
-+	movdqa		-0x90(%r10),%xmm8
-+	movdqa		-0x80(%r10),%xmm9
-+	movdqa		-0x70(%r10),%xmm10
-+	movdqa		-0x60(%r10),%xmm11
-+	movdqa		-0x50(%r10),%xmm12
-+	movdqa		-0x40(%r10),%xmm13
-+	movdqa		-0x30(%r10),%xmm14
-+	movdqa		-0x20(%r10),%xmm15
-+	lea		-8(%r10),%rsp
- .Ldo_avx512_epilogue:
- ___
- $code.=<<___	if (!$win64);
--	lea		8(%r11),%rsp
--.cfi_def_cfa		%rsp,8
-+	lea		-8(%r10),%rsp
-+.cfi_def_cfa_register	%rsp
- ___
- $code.=<<___;
- 	ret
- .cfi_endproc
--.size	poly1305_blocks_avx512,.-poly1305_blocks_avx512
- ___
--if ($avx>3) {
-+
-+}
-+
-+}
-+
-+&declare_function("poly1305_blocks_avx2", 32, 4);
-+poly1305_blocks_avxN(0);
-+&end_function("poly1305_blocks_avx2");
-+
-+if($kernel) {
-+	$code .= "#endif\n";
-+}
-+
-+#######################################################################
-+if ($avx>2) {
-+# On entry we have input length divisible by 64. But since inner loop
-+# processes 128 bytes per iteration, cases when length is not divisible
-+# by 128 are handled by passing tail 64 bytes to .Ltail_avx2. For this
-+# reason stack layout is kept identical to poly1305_blocks_avx2. If not
-+# for this tail, we wouldn't have to even allocate stack frame...
-+
-+if($kernel) {
-+	$code .= "#ifdef CONFIG_AS_AVX512\n";
-+}
-+
-+&declare_function("poly1305_blocks_avx512", 32, 4);
-+poly1305_blocks_avxN(1);
-+&end_function("poly1305_blocks_avx512");
-+
-+if ($kernel) {
-+	$code .= "#endif\n";
-+}
-+
-+if (!$kernel && $avx>3) {
- ########################################################################
- # VPMADD52 version using 2^44 radix.
- #
-@@ -3753,45 +3881,9 @@ poly1305_emit_base2_44:
- .size	poly1305_emit_base2_44,.-poly1305_emit_base2_44
- ___
- }	}	}
--$code.=<<___;
--.align	64
--.Lconst:
--.Lmask24:
--.long	0x0ffffff,0,0x0ffffff,0,0x0ffffff,0,0x0ffffff,0
--.L129:
--.long	`1<<24`,0,`1<<24`,0,`1<<24`,0,`1<<24`,0
--.Lmask26:
--.long	0x3ffffff,0,0x3ffffff,0,0x3ffffff,0,0x3ffffff,0
--.Lpermd_avx2:
--.long	2,2,2,3,2,0,2,1
--.Lpermd_avx512:
--.long	0,0,0,1, 0,2,0,3, 0,4,0,5, 0,6,0,7
--
--.L2_44_inp_permd:
--.long	0,1,1,2,2,3,7,7
--.L2_44_inp_shift:
--.quad	0,12,24,64
--.L2_44_mask:
--.quad	0xfffffffffff,0xfffffffffff,0x3ffffffffff,0xffffffffffffffff
--.L2_44_shift_rgt:
--.quad	44,44,42,64
--.L2_44_shift_lft:
--.quad	8,8,10,64
--
--.align	64
--.Lx_mask44:
--.quad	0xfffffffffff,0xfffffffffff,0xfffffffffff,0xfffffffffff
--.quad	0xfffffffffff,0xfffffffffff,0xfffffffffff,0xfffffffffff
--.Lx_mask42:
--.quad	0x3ffffffffff,0x3ffffffffff,0x3ffffffffff,0x3ffffffffff
--.quad	0x3ffffffffff,0x3ffffffffff,0x3ffffffffff,0x3ffffffffff
--___
- }
--$code.=<<___;
--.asciz	"Poly1305 for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
--.align	16
--___
- 
-+if (!$kernel)
- {	# chacha20-poly1305 helpers
- my ($out,$inp,$otp,$len)=$win64 ? ("%rcx","%rdx","%r8", "%r9") :  # Win64 order
-                                   ("%rdi","%rsi","%rdx","%rcx");  # Unix order
-@@ -4038,17 +4130,17 @@ avx_handler:
- 
- .section	.pdata
- .align	4
--	.rva	.LSEH_begin_poly1305_init
--	.rva	.LSEH_end_poly1305_init
--	.rva	.LSEH_info_poly1305_init
--
--	.rva	.LSEH_begin_poly1305_blocks
--	.rva	.LSEH_end_poly1305_blocks
--	.rva	.LSEH_info_poly1305_blocks
--
--	.rva	.LSEH_begin_poly1305_emit
--	.rva	.LSEH_end_poly1305_emit
--	.rva	.LSEH_info_poly1305_emit
-+	.rva	.LSEH_begin_poly1305_init_x86_64
-+	.rva	.LSEH_end_poly1305_init_x86_64
-+	.rva	.LSEH_info_poly1305_init_x86_64
-+
-+	.rva	.LSEH_begin_poly1305_blocks_x86_64
-+	.rva	.LSEH_end_poly1305_blocks_x86_64
-+	.rva	.LSEH_info_poly1305_blocks_x86_64
-+
-+	.rva	.LSEH_begin_poly1305_emit_x86_64
-+	.rva	.LSEH_end_poly1305_emit_x86_64
-+	.rva	.LSEH_info_poly1305_emit_x86_64
- ___
- $code.=<<___ if ($avx);
- 	.rva	.LSEH_begin_poly1305_blocks_avx
-@@ -4088,20 +4180,20 @@ ___
- $code.=<<___;
- .section	.xdata
- .align	8
--.LSEH_info_poly1305_init:
-+.LSEH_info_poly1305_init_x86_64:
- 	.byte	9,0,0,0
- 	.rva	se_handler
--	.rva	.LSEH_begin_poly1305_init,.LSEH_begin_poly1305_init
-+	.rva	.LSEH_begin_poly1305_init_x86_64,.LSEH_begin_poly1305_init_x86_64
- 
--.LSEH_info_poly1305_blocks:
-+.LSEH_info_poly1305_blocks_x86_64:
- 	.byte	9,0,0,0
- 	.rva	se_handler
- 	.rva	.Lblocks_body,.Lblocks_epilogue
- 
--.LSEH_info_poly1305_emit:
-+.LSEH_info_poly1305_emit_x86_64:
- 	.byte	9,0,0,0
- 	.rva	se_handler
--	.rva	.LSEH_begin_poly1305_emit,.LSEH_begin_poly1305_emit
-+	.rva	.LSEH_begin_poly1305_emit_x86_64,.LSEH_begin_poly1305_emit_x86_64
- ___
- $code.=<<___ if ($avx);
- .LSEH_info_poly1305_blocks_avx_1:
-@@ -4148,12 +4240,26 @@ $code.=<<___ if ($avx>2);
- ___
- }
- 
-+open SELF,$0;
-+while(<SELF>) {
-+	next if (/^#!/);
-+	last if (!s/^#/\/\// and !/^$/);
-+	print;
-+}
-+close SELF;
-+
- foreach (split('\n',$code)) {
- 	s/\`([^\`]*)\`/eval($1)/ge;
- 	s/%r([a-z]+)#d/%e$1/g;
- 	s/%r([0-9]+)#d/%r$1d/g;
- 	s/%x#%[yz]/%x/g or s/%y#%z/%y/g or s/%z#%[yz]/%z/g;
- 
-+	if ($kernel) {
-+		s/(^\.type.*),[0-9]+$/\1/;
-+		s/(^\.type.*),\@abi-omnipotent+$/\1,\@function/;
-+		next if /^\.cfi.*/;
-+	}
-+
- 	print $_,"\n";
- }
- close STDOUT;
---- a/arch/x86/crypto/poly1305_glue.c
-+++ b/arch/x86/crypto/poly1305_glue.c
-@@ -1,8 +1,6 @@
--// SPDX-License-Identifier: GPL-2.0-or-later
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
- /*
-- * Poly1305 authenticator algorithm, RFC7539, SIMD glue code
-- *
-- * Copyright (C) 2015 Martin Willi
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-  */
- 
- #include <crypto/algapi.h>
-@@ -13,279 +11,170 @@
- #include <linux/jump_label.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
-+#include <asm/intel-family.h>
- #include <asm/simd.h>
- 
--asmlinkage void poly1305_block_sse2(u32 *h, const u8 *src,
--				    const u32 *r, unsigned int blocks);
--asmlinkage void poly1305_2block_sse2(u32 *h, const u8 *src, const u32 *r,
--				     unsigned int blocks, const u32 *u);
--asmlinkage void poly1305_4block_avx2(u32 *h, const u8 *src, const u32 *r,
--				     unsigned int blocks, const u32 *u);
-+asmlinkage void poly1305_init_x86_64(void *ctx,
-+				     const u8 key[POLY1305_KEY_SIZE]);
-+asmlinkage void poly1305_blocks_x86_64(void *ctx, const u8 *inp,
-+				       const size_t len, const u32 padbit);
-+asmlinkage void poly1305_emit_x86_64(void *ctx, u8 mac[POLY1305_DIGEST_SIZE],
-+				     const u32 nonce[4]);
-+asmlinkage void poly1305_emit_avx(void *ctx, u8 mac[POLY1305_DIGEST_SIZE],
-+				  const u32 nonce[4]);
-+asmlinkage void poly1305_blocks_avx(void *ctx, const u8 *inp, const size_t len,
-+				    const u32 padbit);
-+asmlinkage void poly1305_blocks_avx2(void *ctx, const u8 *inp, const size_t len,
-+				     const u32 padbit);
-+asmlinkage void poly1305_blocks_avx512(void *ctx, const u8 *inp,
-+				       const size_t len, const u32 padbit);
- 
--static __ro_after_init DEFINE_STATIC_KEY_FALSE(poly1305_use_simd);
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(poly1305_use_avx);
- static __ro_after_init DEFINE_STATIC_KEY_FALSE(poly1305_use_avx2);
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(poly1305_use_avx512);
- 
--static inline u64 mlt(u64 a, u64 b)
--{
--	return a * b;
--}
--
--static inline u32 sr(u64 v, u_char n)
--{
--	return v >> n;
--}
--
--static inline u32 and(u32 v, u32 mask)
--{
--	return v & mask;
--}
--
--static void poly1305_simd_mult(u32 *a, const u32 *b)
--{
--	u8 m[POLY1305_BLOCK_SIZE];
--
--	memset(m, 0, sizeof(m));
--	/* The poly1305 block function adds a hi-bit to the accumulator which
--	 * we don't need for key multiplication; compensate for it. */
--	a[4] -= 1 << 24;
--	poly1305_block_sse2(a, m, b, 1);
--}
--
--static void poly1305_integer_setkey(struct poly1305_key *key, const u8 *raw_key)
--{
--	/* r &= 0xffffffc0ffffffc0ffffffc0fffffff */
--	key->r[0] = (get_unaligned_le32(raw_key +  0) >> 0) & 0x3ffffff;
--	key->r[1] = (get_unaligned_le32(raw_key +  3) >> 2) & 0x3ffff03;
--	key->r[2] = (get_unaligned_le32(raw_key +  6) >> 4) & 0x3ffc0ff;
--	key->r[3] = (get_unaligned_le32(raw_key +  9) >> 6) & 0x3f03fff;
--	key->r[4] = (get_unaligned_le32(raw_key + 12) >> 8) & 0x00fffff;
--}
-+struct poly1305_arch_internal {
-+	union {
-+		struct {
-+			u32 h[5];
-+			u32 is_base2_26;
-+		};
-+		u64 hs[3];
-+	};
-+	u64 r[2];
-+	u64 pad;
-+	struct { u32 r2, r1, r4, r3; } rn[9];
-+};
- 
--static void poly1305_integer_blocks(struct poly1305_state *state,
--				    const struct poly1305_key *key,
--				    const void *src,
--				    unsigned int nblocks, u32 hibit)
-+/* The AVX code uses base 2^26, while the scalar code uses base 2^64. If we hit
-+ * the unfortunate situation of using AVX and then having to go back to scalar
-+ * -- because the user is silly and has called the update function from two
-+ * separate contexts -- then we need to convert back to the original base before
-+ * proceeding. It is possible to reason that the initial reduction below is
-+ * sufficient given the implementation invariants. However, for an avoidance of
-+ * doubt and because this is not performance critical, we do the full reduction
-+ * anyway. Z3 proof of below function: https://xn--4db.cc/ltPtHCKN/py
-+ */
-+static void convert_to_base2_64(void *ctx)
- {
--	u32 r0, r1, r2, r3, r4;
--	u32 s1, s2, s3, s4;
--	u32 h0, h1, h2, h3, h4;
--	u64 d0, d1, d2, d3, d4;
-+	struct poly1305_arch_internal *state = ctx;
-+	u32 cy;
- 
--	if (!nblocks)
-+	if (!state->is_base2_26)
- 		return;
- 
--	r0 = key->r[0];
--	r1 = key->r[1];
--	r2 = key->r[2];
--	r3 = key->r[3];
--	r4 = key->r[4];
--
--	s1 = r1 * 5;
--	s2 = r2 * 5;
--	s3 = r3 * 5;
--	s4 = r4 * 5;
--
--	h0 = state->h[0];
--	h1 = state->h[1];
--	h2 = state->h[2];
--	h3 = state->h[3];
--	h4 = state->h[4];
--
--	do {
--		/* h += m[i] */
--		h0 += (get_unaligned_le32(src +  0) >> 0) & 0x3ffffff;
--		h1 += (get_unaligned_le32(src +  3) >> 2) & 0x3ffffff;
--		h2 += (get_unaligned_le32(src +  6) >> 4) & 0x3ffffff;
--		h3 += (get_unaligned_le32(src +  9) >> 6) & 0x3ffffff;
--		h4 += (get_unaligned_le32(src + 12) >> 8) | (hibit << 24);
--
--		/* h *= r */
--		d0 = mlt(h0, r0) + mlt(h1, s4) + mlt(h2, s3) +
--		     mlt(h3, s2) + mlt(h4, s1);
--		d1 = mlt(h0, r1) + mlt(h1, r0) + mlt(h2, s4) +
--		     mlt(h3, s3) + mlt(h4, s2);
--		d2 = mlt(h0, r2) + mlt(h1, r1) + mlt(h2, r0) +
--		     mlt(h3, s4) + mlt(h4, s3);
--		d3 = mlt(h0, r3) + mlt(h1, r2) + mlt(h2, r1) +
--		     mlt(h3, r0) + mlt(h4, s4);
--		d4 = mlt(h0, r4) + mlt(h1, r3) + mlt(h2, r2) +
--		     mlt(h3, r1) + mlt(h4, r0);
--
--		/* (partial) h %= p */
--		d1 += sr(d0, 26);     h0 = and(d0, 0x3ffffff);
--		d2 += sr(d1, 26);     h1 = and(d1, 0x3ffffff);
--		d3 += sr(d2, 26);     h2 = and(d2, 0x3ffffff);
--		d4 += sr(d3, 26);     h3 = and(d3, 0x3ffffff);
--		h0 += sr(d4, 26) * 5; h4 = and(d4, 0x3ffffff);
--		h1 += h0 >> 26;       h0 = h0 & 0x3ffffff;
--
--		src += POLY1305_BLOCK_SIZE;
--	} while (--nblocks);
--
--	state->h[0] = h0;
--	state->h[1] = h1;
--	state->h[2] = h2;
--	state->h[3] = h3;
--	state->h[4] = h4;
--}
--
--static void poly1305_integer_emit(const struct poly1305_state *state, void *dst)
--{
--	u32 h0, h1, h2, h3, h4;
--	u32 g0, g1, g2, g3, g4;
--	u32 mask;
--
--	/* fully carry h */
--	h0 = state->h[0];
--	h1 = state->h[1];
--	h2 = state->h[2];
--	h3 = state->h[3];
--	h4 = state->h[4];
--
--	h2 += (h1 >> 26);     h1 = h1 & 0x3ffffff;
--	h3 += (h2 >> 26);     h2 = h2 & 0x3ffffff;
--	h4 += (h3 >> 26);     h3 = h3 & 0x3ffffff;
--	h0 += (h4 >> 26) * 5; h4 = h4 & 0x3ffffff;
--	h1 += (h0 >> 26);     h0 = h0 & 0x3ffffff;
--
--	/* compute h + -p */
--	g0 = h0 + 5;
--	g1 = h1 + (g0 >> 26);             g0 &= 0x3ffffff;
--	g2 = h2 + (g1 >> 26);             g1 &= 0x3ffffff;
--	g3 = h3 + (g2 >> 26);             g2 &= 0x3ffffff;
--	g4 = h4 + (g3 >> 26) - (1 << 26); g3 &= 0x3ffffff;
--
--	/* select h if h < p, or h + -p if h >= p */
--	mask = (g4 >> ((sizeof(u32) * 8) - 1)) - 1;
--	g0 &= mask;
--	g1 &= mask;
--	g2 &= mask;
--	g3 &= mask;
--	g4 &= mask;
--	mask = ~mask;
--	h0 = (h0 & mask) | g0;
--	h1 = (h1 & mask) | g1;
--	h2 = (h2 & mask) | g2;
--	h3 = (h3 & mask) | g3;
--	h4 = (h4 & mask) | g4;
--
--	/* h = h % (2^128) */
--	put_unaligned_le32((h0 >>  0) | (h1 << 26), dst +  0);
--	put_unaligned_le32((h1 >>  6) | (h2 << 20), dst +  4);
--	put_unaligned_le32((h2 >> 12) | (h3 << 14), dst +  8);
--	put_unaligned_le32((h3 >> 18) | (h4 <<  8), dst + 12);
--}
--
--void poly1305_init_arch(struct poly1305_desc_ctx *desc, const u8 *key)
--{
--	poly1305_integer_setkey(desc->opaque_r, key);
--	desc->s[0] = get_unaligned_le32(key + 16);
--	desc->s[1] = get_unaligned_le32(key + 20);
--	desc->s[2] = get_unaligned_le32(key + 24);
--	desc->s[3] = get_unaligned_le32(key + 28);
--	poly1305_core_init(&desc->h);
--	desc->buflen = 0;
--	desc->sset = true;
--	desc->rset = 1;
--}
--EXPORT_SYMBOL_GPL(poly1305_init_arch);
--
--static unsigned int crypto_poly1305_setdesckey(struct poly1305_desc_ctx *dctx,
--					       const u8 *src, unsigned int srclen)
--{
--	if (!dctx->sset) {
--		if (!dctx->rset && srclen >= POLY1305_BLOCK_SIZE) {
--			poly1305_integer_setkey(dctx->r, src);
--			src += POLY1305_BLOCK_SIZE;
--			srclen -= POLY1305_BLOCK_SIZE;
--			dctx->rset = 1;
--		}
--		if (srclen >= POLY1305_BLOCK_SIZE) {
--			dctx->s[0] = get_unaligned_le32(src +  0);
--			dctx->s[1] = get_unaligned_le32(src +  4);
--			dctx->s[2] = get_unaligned_le32(src +  8);
--			dctx->s[3] = get_unaligned_le32(src + 12);
--			src += POLY1305_BLOCK_SIZE;
--			srclen -= POLY1305_BLOCK_SIZE;
--			dctx->sset = true;
--		}
-+	cy = state->h[0] >> 26; state->h[0] &= 0x3ffffff; state->h[1] += cy;
-+	cy = state->h[1] >> 26; state->h[1] &= 0x3ffffff; state->h[2] += cy;
-+	cy = state->h[2] >> 26; state->h[2] &= 0x3ffffff; state->h[3] += cy;
-+	cy = state->h[3] >> 26; state->h[3] &= 0x3ffffff; state->h[4] += cy;
-+	state->hs[0] = ((u64)state->h[2] << 52) | ((u64)state->h[1] << 26) | state->h[0];
-+	state->hs[1] = ((u64)state->h[4] << 40) | ((u64)state->h[3] << 14) | (state->h[2] >> 12);
-+	state->hs[2] = state->h[4] >> 24;
-+#define ULT(a, b) ((a ^ ((a ^ b) | ((a - b) ^ b))) >> (sizeof(a) * 8 - 1))
-+	cy = (state->hs[2] >> 2) + (state->hs[2] & ~3ULL);
-+	state->hs[2] &= 3;
-+	state->hs[0] += cy;
-+	state->hs[1] += (cy = ULT(state->hs[0], cy));
-+	state->hs[2] += ULT(state->hs[1], cy);
-+#undef ULT
-+	state->is_base2_26 = 0;
-+}
-+
-+static void poly1305_simd_init(void *ctx, const u8 key[POLY1305_KEY_SIZE])
-+{
-+	poly1305_init_x86_64(ctx, key);
-+}
-+
-+static void poly1305_simd_blocks(void *ctx, const u8 *inp, size_t len,
-+				 const u32 padbit)
-+{
-+	struct poly1305_arch_internal *state = ctx;
-+
-+	/* SIMD disables preemption, so relax after processing each page. */
-+	BUILD_BUG_ON(PAGE_SIZE < POLY1305_BLOCK_SIZE ||
-+		     PAGE_SIZE % POLY1305_BLOCK_SIZE);
-+
-+	if (!IS_ENABLED(CONFIG_AS_AVX) || !static_branch_likely(&poly1305_use_avx) ||
-+	    (len < (POLY1305_BLOCK_SIZE * 18) && !state->is_base2_26) ||
-+	    !crypto_simd_usable()) {
-+		convert_to_base2_64(ctx);
-+		poly1305_blocks_x86_64(ctx, inp, len, padbit);
-+		return;
- 	}
--	return srclen;
--}
- 
--static unsigned int poly1305_scalar_blocks(struct poly1305_desc_ctx *dctx,
--					   const u8 *src, unsigned int srclen)
--{
--	unsigned int datalen;
-+	for (;;) {
-+		const size_t bytes = min_t(size_t, len, PAGE_SIZE);
- 
--	if (unlikely(!dctx->sset)) {
--		datalen = crypto_poly1305_setdesckey(dctx, src, srclen);
--		src += srclen - datalen;
--		srclen = datalen;
--	}
--	if (srclen >= POLY1305_BLOCK_SIZE) {
--		poly1305_integer_blocks(&dctx->h, dctx->opaque_r, src,
--					srclen / POLY1305_BLOCK_SIZE, 1);
--		srclen %= POLY1305_BLOCK_SIZE;
-+		kernel_fpu_begin();
-+		if (IS_ENABLED(CONFIG_AS_AVX512) && static_branch_likely(&poly1305_use_avx512))
-+			poly1305_blocks_avx512(ctx, inp, bytes, padbit);
-+		else if (IS_ENABLED(CONFIG_AS_AVX2) && static_branch_likely(&poly1305_use_avx2))
-+			poly1305_blocks_avx2(ctx, inp, bytes, padbit);
-+		else
-+			poly1305_blocks_avx(ctx, inp, bytes, padbit);
-+		kernel_fpu_end();
-+		len -= bytes;
-+		if (!len)
-+			break;
-+		inp += bytes;
- 	}
--	return srclen;
- }
- 
--static unsigned int poly1305_simd_blocks(struct poly1305_desc_ctx *dctx,
--					 const u8 *src, unsigned int srclen)
--{
--	unsigned int blocks, datalen;
-+static void poly1305_simd_emit(void *ctx, u8 mac[POLY1305_DIGEST_SIZE],
-+			       const u32 nonce[4])
-+{
-+	struct poly1305_arch_internal *state = ctx;
-+
-+	if (!IS_ENABLED(CONFIG_AS_AVX) || !static_branch_likely(&poly1305_use_avx) ||
-+	    !state->is_base2_26 || !crypto_simd_usable()) {
-+		convert_to_base2_64(ctx);
-+		poly1305_emit_x86_64(ctx, mac, nonce);
-+	} else
-+		poly1305_emit_avx(ctx, mac, nonce);
-+}
-+
-+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
-+{
-+	poly1305_simd_init(&dctx->h, key);
-+	dctx->s[0] = get_unaligned_le32(&key[16]);
-+	dctx->s[1] = get_unaligned_le32(&key[20]);
-+	dctx->s[2] = get_unaligned_le32(&key[24]);
-+	dctx->s[3] = get_unaligned_le32(&key[28]);
-+	dctx->buflen = 0;
-+	dctx->sset = true;
-+}
-+EXPORT_SYMBOL(poly1305_init_arch);
- 
-+static unsigned int crypto_poly1305_setdctxkey(struct poly1305_desc_ctx *dctx,
-+					       const u8 *inp, unsigned int len)
-+{
-+	unsigned int acc = 0;
- 	if (unlikely(!dctx->sset)) {
--		datalen = crypto_poly1305_setdesckey(dctx, src, srclen);
--		src += srclen - datalen;
--		srclen = datalen;
--	}
--
--	if (IS_ENABLED(CONFIG_AS_AVX2) &&
--	    static_branch_likely(&poly1305_use_avx2) &&
--	    srclen >= POLY1305_BLOCK_SIZE * 4) {
--		if (unlikely(dctx->rset < 4)) {
--			if (dctx->rset < 2) {
--				dctx->r[1] = dctx->r[0];
--				poly1305_simd_mult(dctx->r[1].r, dctx->r[0].r);
--			}
--			dctx->r[2] = dctx->r[1];
--			poly1305_simd_mult(dctx->r[2].r, dctx->r[0].r);
--			dctx->r[3] = dctx->r[2];
--			poly1305_simd_mult(dctx->r[3].r, dctx->r[0].r);
--			dctx->rset = 4;
-+		if (!dctx->rset && len >= POLY1305_BLOCK_SIZE) {
-+			poly1305_simd_init(&dctx->h, inp);
-+			inp += POLY1305_BLOCK_SIZE;
-+			len -= POLY1305_BLOCK_SIZE;
-+			acc += POLY1305_BLOCK_SIZE;
-+			dctx->rset = 1;
- 		}
--		blocks = srclen / (POLY1305_BLOCK_SIZE * 4);
--		poly1305_4block_avx2(dctx->h.h, src, dctx->r[0].r, blocks,
--				     dctx->r[1].r);
--		src += POLY1305_BLOCK_SIZE * 4 * blocks;
--		srclen -= POLY1305_BLOCK_SIZE * 4 * blocks;
--	}
--
--	if (likely(srclen >= POLY1305_BLOCK_SIZE * 2)) {
--		if (unlikely(dctx->rset < 2)) {
--			dctx->r[1] = dctx->r[0];
--			poly1305_simd_mult(dctx->r[1].r, dctx->r[0].r);
--			dctx->rset = 2;
-+		if (len >= POLY1305_BLOCK_SIZE) {
-+			dctx->s[0] = get_unaligned_le32(&inp[0]);
-+			dctx->s[1] = get_unaligned_le32(&inp[4]);
-+			dctx->s[2] = get_unaligned_le32(&inp[8]);
-+			dctx->s[3] = get_unaligned_le32(&inp[12]);
-+			inp += POLY1305_BLOCK_SIZE;
-+			len -= POLY1305_BLOCK_SIZE;
-+			acc += POLY1305_BLOCK_SIZE;
-+			dctx->sset = true;
- 		}
--		blocks = srclen / (POLY1305_BLOCK_SIZE * 2);
--		poly1305_2block_sse2(dctx->h.h, src, dctx->r[0].r,
--				     blocks, dctx->r[1].r);
--		src += POLY1305_BLOCK_SIZE * 2 * blocks;
--		srclen -= POLY1305_BLOCK_SIZE * 2 * blocks;
--	}
--	if (srclen >= POLY1305_BLOCK_SIZE) {
--		poly1305_block_sse2(dctx->h.h, src, dctx->r[0].r, 1);
--		srclen -= POLY1305_BLOCK_SIZE;
- 	}
--	return srclen;
-+	return acc;
- }
- 
- void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src,
- 			  unsigned int srclen)
- {
--	unsigned int bytes;
-+	unsigned int bytes, used;
- 
- 	if (unlikely(dctx->buflen)) {
- 		bytes = min(srclen, POLY1305_BLOCK_SIZE - dctx->buflen);
-@@ -295,31 +184,19 @@ void poly1305_update_arch(struct poly130
- 		dctx->buflen += bytes;
- 
- 		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
--			if (static_branch_likely(&poly1305_use_simd) &&
--			    likely(crypto_simd_usable())) {
--				kernel_fpu_begin();
--				poly1305_simd_blocks(dctx, dctx->buf,
--						     POLY1305_BLOCK_SIZE);
--				kernel_fpu_end();
--			} else {
--				poly1305_scalar_blocks(dctx, dctx->buf,
--						       POLY1305_BLOCK_SIZE);
--			}
-+			if (likely(!crypto_poly1305_setdctxkey(dctx, dctx->buf, POLY1305_BLOCK_SIZE)))
-+				poly1305_simd_blocks(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 1);
- 			dctx->buflen = 0;
- 		}
- 	}
- 
- 	if (likely(srclen >= POLY1305_BLOCK_SIZE)) {
--		if (static_branch_likely(&poly1305_use_simd) &&
--		    likely(crypto_simd_usable())) {
--			kernel_fpu_begin();
--			bytes = poly1305_simd_blocks(dctx, src, srclen);
--			kernel_fpu_end();
--		} else {
--			bytes = poly1305_scalar_blocks(dctx, src, srclen);
--		}
--		src += srclen - bytes;
--		srclen = bytes;
-+		bytes = round_down(srclen, POLY1305_BLOCK_SIZE);
-+		srclen -= bytes;
-+		used = crypto_poly1305_setdctxkey(dctx, src, bytes);
-+		if (likely(bytes - used))
-+			poly1305_simd_blocks(&dctx->h, src + used, bytes - used, 1);
-+		src += bytes;
- 	}
- 
- 	if (unlikely(srclen)) {
-@@ -329,31 +206,17 @@ void poly1305_update_arch(struct poly130
- }
- EXPORT_SYMBOL(poly1305_update_arch);
- 
--void poly1305_final_arch(struct poly1305_desc_ctx *desc, u8 *dst)
-+void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst)
- {
--	__le32 digest[4];
--	u64 f = 0;
--
--	if (unlikely(desc->buflen)) {
--		desc->buf[desc->buflen++] = 1;
--		memset(desc->buf + desc->buflen, 0,
--		       POLY1305_BLOCK_SIZE - desc->buflen);
--		poly1305_integer_blocks(&desc->h, desc->opaque_r, desc->buf, 1, 0);
-+	if (unlikely(dctx->buflen)) {
-+		dctx->buf[dctx->buflen++] = 1;
-+		memset(dctx->buf + dctx->buflen, 0,
-+		       POLY1305_BLOCK_SIZE - dctx->buflen);
-+		poly1305_simd_blocks(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
- 	}
- 
--	poly1305_integer_emit(&desc->h, digest);
--
--	/* mac = (h + s) % (2^128) */
--	f = (f >> 32) + le32_to_cpu(digest[0]) + desc->s[0];
--	put_unaligned_le32(f, dst + 0);
--	f = (f >> 32) + le32_to_cpu(digest[1]) + desc->s[1];
--	put_unaligned_le32(f, dst + 4);
--	f = (f >> 32) + le32_to_cpu(digest[2]) + desc->s[2];
--	put_unaligned_le32(f, dst + 8);
--	f = (f >> 32) + le32_to_cpu(digest[3]) + desc->s[3];
--	put_unaligned_le32(f, dst + 12);
--
--	*desc = (struct poly1305_desc_ctx){};
-+	poly1305_simd_emit(&dctx->h, dst, dctx->s);
-+	*dctx = (struct poly1305_desc_ctx){};
- }
- EXPORT_SYMBOL(poly1305_final_arch);
- 
-@@ -361,38 +224,34 @@ static int crypto_poly1305_init(struct s
- {
- 	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
- 
--	poly1305_core_init(&dctx->h);
--	dctx->buflen = 0;
--	dctx->rset = 0;
--	dctx->sset = false;
--
-+	*dctx = (struct poly1305_desc_ctx){};
- 	return 0;
- }
- 
--static int crypto_poly1305_final(struct shash_desc *desc, u8 *dst)
-+static int crypto_poly1305_update(struct shash_desc *desc,
-+				  const u8 *src, unsigned int srclen)
- {
- 	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
- 
--	if (unlikely(!dctx->sset))
--		return -ENOKEY;
--
--	poly1305_final_arch(dctx, dst);
-+	poly1305_update_arch(dctx, src, srclen);
- 	return 0;
- }
- 
--static int poly1305_simd_update(struct shash_desc *desc,
--				const u8 *src, unsigned int srclen)
-+static int crypto_poly1305_final(struct shash_desc *desc, u8 *dst)
- {
- 	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
- 
--	poly1305_update_arch(dctx, src, srclen);
-+	if (unlikely(!dctx->sset))
-+		return -ENOKEY;
-+
-+	poly1305_final_arch(dctx, dst);
- 	return 0;
- }
- 
- static struct shash_alg alg = {
- 	.digestsize	= POLY1305_DIGEST_SIZE,
- 	.init		= crypto_poly1305_init,
--	.update		= poly1305_simd_update,
-+	.update		= crypto_poly1305_update,
- 	.final		= crypto_poly1305_final,
- 	.descsize	= sizeof(struct poly1305_desc_ctx),
- 	.base		= {
-@@ -406,17 +265,19 @@ static struct shash_alg alg = {
- 
- static int __init poly1305_simd_mod_init(void)
- {
--	if (!boot_cpu_has(X86_FEATURE_XMM2))
--		return 0;
--
--	static_branch_enable(&poly1305_use_simd);
--
--	if (IS_ENABLED(CONFIG_AS_AVX2) &&
--	    boot_cpu_has(X86_FEATURE_AVX) &&
-+	if (IS_ENABLED(CONFIG_AS_AVX) && boot_cpu_has(X86_FEATURE_AVX) &&
-+	    cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM, NULL))
-+		static_branch_enable(&poly1305_use_avx);
-+	if (IS_ENABLED(CONFIG_AS_AVX2) && boot_cpu_has(X86_FEATURE_AVX) &&
- 	    boot_cpu_has(X86_FEATURE_AVX2) &&
- 	    cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM, NULL))
- 		static_branch_enable(&poly1305_use_avx2);
--
-+	if (IS_ENABLED(CONFIG_AS_AVX512) && boot_cpu_has(X86_FEATURE_AVX) &&
-+	    boot_cpu_has(X86_FEATURE_AVX2) && boot_cpu_has(X86_FEATURE_AVX512F) &&
-+	    cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM | XFEATURE_MASK_AVX512, NULL) &&
-+	    /* Skylake downclocks unacceptably much when using zmm, but later generations are fast. */
-+	    boot_cpu_data.x86_model != INTEL_FAM6_SKYLAKE_X)
-+		static_branch_enable(&poly1305_use_avx512);
- 	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ? crypto_register_shash(&alg) : 0;
- }
- 
-@@ -430,7 +291,7 @@ module_init(poly1305_simd_mod_init);
- module_exit(poly1305_simd_mod_exit);
- 
- MODULE_LICENSE("GPL");
--MODULE_AUTHOR("Martin Willi <martin@strongswan.org>");
-+MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
- MODULE_DESCRIPTION("Poly1305 authenticator");
- MODULE_ALIAS_CRYPTO("poly1305");
- MODULE_ALIAS_CRYPTO("poly1305-simd");
---- a/lib/crypto/Kconfig
-+++ b/lib/crypto/Kconfig
-@@ -90,7 +90,7 @@ config CRYPTO_LIB_DES
- config CRYPTO_LIB_POLY1305_RSIZE
- 	int
- 	default 2 if MIPS
--	default 4 if X86_64
-+	default 11 if X86_64
- 	default 9 if ARM || ARM64
- 	default 1
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0044-crypto-arm-arm64-mips-poly1305-remove-redundant-non-.patch b/target/linux/generic/backport-5.4/080-wireguard-0044-crypto-arm-arm64-mips-poly1305-remove-redundant-non-.patch
deleted file mode 100644
index b95b998880..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0044-crypto-arm-arm64-mips-poly1305-remove-redundant-non-.patch
+++ /dev/null
@@ -1,171 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Sun, 5 Jan 2020 22:40:49 -0500
-Subject: [PATCH] crypto: {arm,arm64,mips}/poly1305 - remove redundant
- non-reduction from emit
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-commit 31899908a0d248b030b4464425b86c717e0007d4 upstream.
-
-This appears to be some kind of copy and paste error, and is actually
-dead code.
-
-Pre: f = 0 ⇒ (f >> 32) = 0
-    f = (f >> 32) + le32_to_cpu(digest[0]);
-Post: 0 ≤ f < 2³²
-    put_unaligned_le32(f, dst);
-
-Pre: 0 ≤ f < 2³² ⇒ (f >> 32) = 0
-    f = (f >> 32) + le32_to_cpu(digest[1]);
-Post: 0 ≤ f < 2³²
-    put_unaligned_le32(f, dst + 4);
-
-Pre: 0 ≤ f < 2³² ⇒ (f >> 32) = 0
-    f = (f >> 32) + le32_to_cpu(digest[2]);
-Post: 0 ≤ f < 2³²
-    put_unaligned_le32(f, dst + 8);
-
-Pre: 0 ≤ f < 2³² ⇒ (f >> 32) = 0
-    f = (f >> 32) + le32_to_cpu(digest[3]);
-Post: 0 ≤ f < 2³²
-    put_unaligned_le32(f, dst + 12);
-
-Therefore this sequence is redundant. And Andy's code appears to handle
-misalignment acceptably.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Tested-by: Ard Biesheuvel <ardb@kernel.org>
-Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/poly1305-glue.c   | 18 ++----------------
- arch/arm64/crypto/poly1305-glue.c | 18 ++----------------
- arch/mips/crypto/poly1305-glue.c  | 18 ++----------------
- 3 files changed, 6 insertions(+), 48 deletions(-)
-
---- a/arch/arm/crypto/poly1305-glue.c
-+++ b/arch/arm/crypto/poly1305-glue.c
-@@ -20,7 +20,7 @@
- 
- void poly1305_init_arm(void *state, const u8 *key);
- void poly1305_blocks_arm(void *state, const u8 *src, u32 len, u32 hibit);
--void poly1305_emit_arm(void *state, __le32 *digest, const u32 *nonce);
-+void poly1305_emit_arm(void *state, u8 *digest, const u32 *nonce);
- 
- void __weak poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit)
- {
-@@ -179,9 +179,6 @@ EXPORT_SYMBOL(poly1305_update_arch);
- 
- void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst)
- {
--	__le32 digest[4];
--	u64 f = 0;
--
- 	if (unlikely(dctx->buflen)) {
- 		dctx->buf[dctx->buflen++] = 1;
- 		memset(dctx->buf + dctx->buflen, 0,
-@@ -189,18 +186,7 @@ void poly1305_final_arch(struct poly1305
- 		poly1305_blocks_arm(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
- 	}
- 
--	poly1305_emit_arm(&dctx->h, digest, dctx->s);
--
--	/* mac = (h + s) % (2^128) */
--	f = (f >> 32) + le32_to_cpu(digest[0]);
--	put_unaligned_le32(f, dst);
--	f = (f >> 32) + le32_to_cpu(digest[1]);
--	put_unaligned_le32(f, dst + 4);
--	f = (f >> 32) + le32_to_cpu(digest[2]);
--	put_unaligned_le32(f, dst + 8);
--	f = (f >> 32) + le32_to_cpu(digest[3]);
--	put_unaligned_le32(f, dst + 12);
--
-+	poly1305_emit_arm(&dctx->h, dst, dctx->s);
- 	*dctx = (struct poly1305_desc_ctx){};
- }
- EXPORT_SYMBOL(poly1305_final_arch);
---- a/arch/arm64/crypto/poly1305-glue.c
-+++ b/arch/arm64/crypto/poly1305-glue.c
-@@ -21,7 +21,7 @@
- asmlinkage void poly1305_init_arm64(void *state, const u8 *key);
- asmlinkage void poly1305_blocks(void *state, const u8 *src, u32 len, u32 hibit);
- asmlinkage void poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit);
--asmlinkage void poly1305_emit(void *state, __le32 *digest, const u32 *nonce);
-+asmlinkage void poly1305_emit(void *state, u8 *digest, const u32 *nonce);
- 
- static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
- 
-@@ -162,9 +162,6 @@ EXPORT_SYMBOL(poly1305_update_arch);
- 
- void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst)
- {
--	__le32 digest[4];
--	u64 f = 0;
--
- 	if (unlikely(dctx->buflen)) {
- 		dctx->buf[dctx->buflen++] = 1;
- 		memset(dctx->buf + dctx->buflen, 0,
-@@ -172,18 +169,7 @@ void poly1305_final_arch(struct poly1305
- 		poly1305_blocks(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
- 	}
- 
--	poly1305_emit(&dctx->h, digest, dctx->s);
--
--	/* mac = (h + s) % (2^128) */
--	f = (f >> 32) + le32_to_cpu(digest[0]);
--	put_unaligned_le32(f, dst);
--	f = (f >> 32) + le32_to_cpu(digest[1]);
--	put_unaligned_le32(f, dst + 4);
--	f = (f >> 32) + le32_to_cpu(digest[2]);
--	put_unaligned_le32(f, dst + 8);
--	f = (f >> 32) + le32_to_cpu(digest[3]);
--	put_unaligned_le32(f, dst + 12);
--
-+	poly1305_emit(&dctx->h, dst, dctx->s);
- 	*dctx = (struct poly1305_desc_ctx){};
- }
- EXPORT_SYMBOL(poly1305_final_arch);
---- a/arch/mips/crypto/poly1305-glue.c
-+++ b/arch/mips/crypto/poly1305-glue.c
-@@ -15,7 +15,7 @@
- 
- asmlinkage void poly1305_init_mips(void *state, const u8 *key);
- asmlinkage void poly1305_blocks_mips(void *state, const u8 *src, u32 len, u32 hibit);
--asmlinkage void poly1305_emit_mips(void *state, __le32 *digest, const u32 *nonce);
-+asmlinkage void poly1305_emit_mips(void *state, u8 *digest, const u32 *nonce);
- 
- void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
- {
-@@ -134,9 +134,6 @@ EXPORT_SYMBOL(poly1305_update_arch);
- 
- void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst)
- {
--	__le32 digest[4];
--	u64 f = 0;
--
- 	if (unlikely(dctx->buflen)) {
- 		dctx->buf[dctx->buflen++] = 1;
- 		memset(dctx->buf + dctx->buflen, 0,
-@@ -144,18 +141,7 @@ void poly1305_final_arch(struct poly1305
- 		poly1305_blocks_mips(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
- 	}
- 
--	poly1305_emit_mips(&dctx->h, digest, dctx->s);
--
--	/* mac = (h + s) % (2^128) */
--	f = (f >> 32) + le32_to_cpu(digest[0]);
--	put_unaligned_le32(f, dst);
--	f = (f >> 32) + le32_to_cpu(digest[1]);
--	put_unaligned_le32(f, dst + 4);
--	f = (f >> 32) + le32_to_cpu(digest[2]);
--	put_unaligned_le32(f, dst + 8);
--	f = (f >> 32) + le32_to_cpu(digest[3]);
--	put_unaligned_le32(f, dst + 12);
--
-+	poly1305_emit_mips(&dctx->h, dst, dctx->s);
- 	*dctx = (struct poly1305_desc_ctx){};
- }
- EXPORT_SYMBOL(poly1305_final_arch);
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0045-crypto-curve25519-Fix-selftest-build-error.patch b/target/linux/generic/backport-5.4/080-wireguard-0045-crypto-curve25519-Fix-selftest-build-error.patch
deleted file mode 100644
index fa8d8fd6a9..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0045-crypto-curve25519-Fix-selftest-build-error.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Herbert Xu <herbert@gondor.apana.org.au>
-Date: Wed, 8 Jan 2020 12:37:35 +0800
-Subject: [PATCH] crypto: curve25519 - Fix selftest build error
-
-commit a8bdf2c42ee4d1ee42af1f3601f85de94e70a421 upstream.
-
-If CRYPTO_CURVE25519 is y, CRYPTO_LIB_CURVE25519_GENERIC will be
-y, but CRYPTO_LIB_CURVE25519 may be set to m, this causes build
-errors:
-
-lib/crypto/curve25519-selftest.o: In function `curve25519':
-curve25519-selftest.c:(.text.unlikely+0xc): undefined reference to `curve25519_arch'
-lib/crypto/curve25519-selftest.o: In function `curve25519_selftest':
-curve25519-selftest.c:(.init.text+0x17e): undefined reference to `curve25519_base_arch'
-
-This is because the curve25519 self-test code is being controlled
-by the GENERIC option rather than the overall CURVE25519 option,
-as is the case with blake2s.  To recap, the GENERIC and ARCH options
-for CURVE25519 are internal only and selected by users such as
-the Crypto API, or the externally visible CURVE25519 option which
-in turn is selected by wireguard.  The self-test is specific to the
-the external CURVE25519 option and should not be enabled by the
-Crypto API.
-
-This patch fixes this by splitting the GENERIC module from the
-CURVE25519 module with the latter now containing just the self-test.
-
-Reported-by: Hulk Robot <hulkci@huawei.com>
-Fixes: aa127963f1ca ("crypto: lib/curve25519 - re-add selftests")
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- lib/crypto/Makefile             |  9 ++++++---
- lib/crypto/curve25519-generic.c | 24 ++++++++++++++++++++++++
- lib/crypto/curve25519.c         |  7 -------
- 3 files changed, 30 insertions(+), 10 deletions(-)
- create mode 100644 lib/crypto/curve25519-generic.c
-
---- a/lib/crypto/Makefile
-+++ b/lib/crypto/Makefile
-@@ -19,9 +19,12 @@ libblake2s-y					+= blake2s.o
- obj-$(CONFIG_CRYPTO_LIB_CHACHA20POLY1305)	+= libchacha20poly1305.o
- libchacha20poly1305-y				+= chacha20poly1305.o
- 
--obj-$(CONFIG_CRYPTO_LIB_CURVE25519_GENERIC)	+= libcurve25519.o
--libcurve25519-y					:= curve25519-fiat32.o
--libcurve25519-$(CONFIG_ARCH_SUPPORTS_INT128)	:= curve25519-hacl64.o
-+obj-$(CONFIG_CRYPTO_LIB_CURVE25519_GENERIC)	+= libcurve25519-generic.o
-+libcurve25519-generic-y				:= curve25519-fiat32.o
-+libcurve25519-generic-$(CONFIG_ARCH_SUPPORTS_INT128)	:= curve25519-hacl64.o
-+libcurve25519-generic-y				+= curve25519-generic.o
-+
-+obj-$(CONFIG_CRYPTO_LIB_CURVE25519)		+= libcurve25519.o
- libcurve25519-y					+= curve25519.o
- 
- obj-$(CONFIG_CRYPTO_LIB_DES)			+= libdes.o
---- /dev/null
-+++ b/lib/crypto/curve25519-generic.c
-@@ -0,0 +1,24 @@
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ *
-+ * This is an implementation of the Curve25519 ECDH algorithm, using either
-+ * a 32-bit implementation or a 64-bit implementation with 128-bit integers,
-+ * depending on what is supported by the target compiler.
-+ *
-+ * Information: https://cr.yp.to/ecdh.html
-+ */
-+
-+#include <crypto/curve25519.h>
-+#include <linux/module.h>
-+
-+const u8 curve25519_null_point[CURVE25519_KEY_SIZE] __aligned(32) = { 0 };
-+const u8 curve25519_base_point[CURVE25519_KEY_SIZE] __aligned(32) = { 9 };
-+
-+EXPORT_SYMBOL(curve25519_null_point);
-+EXPORT_SYMBOL(curve25519_base_point);
-+EXPORT_SYMBOL(curve25519_generic);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("Curve25519 scalar multiplication");
-+MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
---- a/lib/crypto/curve25519.c
-+++ b/lib/crypto/curve25519.c
-@@ -15,13 +15,6 @@
- 
- bool curve25519_selftest(void);
- 
--const u8 curve25519_null_point[CURVE25519_KEY_SIZE] __aligned(32) = { 0 };
--const u8 curve25519_base_point[CURVE25519_KEY_SIZE] __aligned(32) = { 9 };
--
--EXPORT_SYMBOL(curve25519_null_point);
--EXPORT_SYMBOL(curve25519_base_point);
--EXPORT_SYMBOL(curve25519_generic);
--
- static int __init mod_init(void)
- {
- 	if (!IS_ENABLED(CONFIG_CRYPTO_MANAGER_DISABLE_TESTS) &&
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0046-crypto-x86-poly1305-fix-.gitignore-typo.patch b/target/linux/generic/backport-5.4/080-wireguard-0046-crypto-x86-poly1305-fix-.gitignore-typo.patch
deleted file mode 100644
index 27f0417ac3..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0046-crypto-x86-poly1305-fix-.gitignore-typo.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Thu, 16 Jan 2020 18:23:55 +0100
-Subject: [PATCH] crypto: x86/poly1305 - fix .gitignore typo
-
-commit 1f6868995326cc82102049e349d8dbd116bdb656 upstream.
-
-Admist the kbuild robot induced changes, the .gitignore file for the
-generated file wasn't updated with the non-clashing filename. This
-commit adjusts that.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/.gitignore | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/x86/crypto/.gitignore
-+++ b/arch/x86/crypto/.gitignore
-@@ -1 +1 @@
--poly1305-x86_64.S
-+poly1305-x86_64-cryptogams.S
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0047-crypto-chacha20poly1305-add-back-missing-test-vector.patch b/target/linux/generic/backport-5.4/080-wireguard-0047-crypto-chacha20poly1305-add-back-missing-test-vector.patch
deleted file mode 100644
index eda969577a..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0047-crypto-chacha20poly1305-add-back-missing-test-vector.patch
+++ /dev/null
@@ -1,1858 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Thu, 16 Jan 2020 21:26:34 +0100
-Subject: [PATCH] crypto: chacha20poly1305 - add back missing test vectors and
- test chunking
-
-commit 72c7943792c9e7788ddd182337bcf8f650cf56f5 upstream.
-
-When this was originally ported, the 12-byte nonce vectors were left out
-to keep things simple. I agree that we don't need nor want a library
-interface for 12-byte nonces. But these test vectors were specially
-crafted to look at issues in the underlying primitives and related
-interactions.  Therefore, we actually want to keep around all of the
-test vectors, and simply have a helper function to test them with.
-
-Secondly, the sglist-based chunking code in the library interface is
-rather complicated, so this adds a developer-only test for ensuring that
-all the book keeping is correct, across a wide array of possibilities.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- lib/crypto/chacha20poly1305-selftest.c | 1712 +++++++++++++++++++++++-
- 1 file changed, 1698 insertions(+), 14 deletions(-)
-
---- a/lib/crypto/chacha20poly1305-selftest.c
-+++ b/lib/crypto/chacha20poly1305-selftest.c
-@@ -4,6 +4,7 @@
-  */
- 
- #include <crypto/chacha20poly1305.h>
-+#include <crypto/chacha.h>
- #include <crypto/poly1305.h>
- 
- #include <asm/unaligned.h>
-@@ -1926,6 +1927,1104 @@ static const u8 enc_key012[] __initconst
- 	0x65, 0x91, 0x6e, 0x2a, 0x79, 0x22, 0xda, 0x64
- };
- 
-+/* wycheproof - rfc7539 */
-+static const u8 enc_input013[] __initconst = {
-+	0x4c, 0x61, 0x64, 0x69, 0x65, 0x73, 0x20, 0x61,
-+	0x6e, 0x64, 0x20, 0x47, 0x65, 0x6e, 0x74, 0x6c,
-+	0x65, 0x6d, 0x65, 0x6e, 0x20, 0x6f, 0x66, 0x20,
-+	0x74, 0x68, 0x65, 0x20, 0x63, 0x6c, 0x61, 0x73,
-+	0x73, 0x20, 0x6f, 0x66, 0x20, 0x27, 0x39, 0x39,
-+	0x3a, 0x20, 0x49, 0x66, 0x20, 0x49, 0x20, 0x63,
-+	0x6f, 0x75, 0x6c, 0x64, 0x20, 0x6f, 0x66, 0x66,
-+	0x65, 0x72, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x6f,
-+	0x6e, 0x6c, 0x79, 0x20, 0x6f, 0x6e, 0x65, 0x20,
-+	0x74, 0x69, 0x70, 0x20, 0x66, 0x6f, 0x72, 0x20,
-+	0x74, 0x68, 0x65, 0x20, 0x66, 0x75, 0x74, 0x75,
-+	0x72, 0x65, 0x2c, 0x20, 0x73, 0x75, 0x6e, 0x73,
-+	0x63, 0x72, 0x65, 0x65, 0x6e, 0x20, 0x77, 0x6f,
-+	0x75, 0x6c, 0x64, 0x20, 0x62, 0x65, 0x20, 0x69,
-+	0x74, 0x2e
-+};
-+static const u8 enc_output013[] __initconst = {
-+	0xd3, 0x1a, 0x8d, 0x34, 0x64, 0x8e, 0x60, 0xdb,
-+	0x7b, 0x86, 0xaf, 0xbc, 0x53, 0xef, 0x7e, 0xc2,
-+	0xa4, 0xad, 0xed, 0x51, 0x29, 0x6e, 0x08, 0xfe,
-+	0xa9, 0xe2, 0xb5, 0xa7, 0x36, 0xee, 0x62, 0xd6,
-+	0x3d, 0xbe, 0xa4, 0x5e, 0x8c, 0xa9, 0x67, 0x12,
-+	0x82, 0xfa, 0xfb, 0x69, 0xda, 0x92, 0x72, 0x8b,
-+	0x1a, 0x71, 0xde, 0x0a, 0x9e, 0x06, 0x0b, 0x29,
-+	0x05, 0xd6, 0xa5, 0xb6, 0x7e, 0xcd, 0x3b, 0x36,
-+	0x92, 0xdd, 0xbd, 0x7f, 0x2d, 0x77, 0x8b, 0x8c,
-+	0x98, 0x03, 0xae, 0xe3, 0x28, 0x09, 0x1b, 0x58,
-+	0xfa, 0xb3, 0x24, 0xe4, 0xfa, 0xd6, 0x75, 0x94,
-+	0x55, 0x85, 0x80, 0x8b, 0x48, 0x31, 0xd7, 0xbc,
-+	0x3f, 0xf4, 0xde, 0xf0, 0x8e, 0x4b, 0x7a, 0x9d,
-+	0xe5, 0x76, 0xd2, 0x65, 0x86, 0xce, 0xc6, 0x4b,
-+	0x61, 0x16, 0x1a, 0xe1, 0x0b, 0x59, 0x4f, 0x09,
-+	0xe2, 0x6a, 0x7e, 0x90, 0x2e, 0xcb, 0xd0, 0x60,
-+	0x06, 0x91
-+};
-+static const u8 enc_assoc013[] __initconst = {
-+	0x50, 0x51, 0x52, 0x53, 0xc0, 0xc1, 0xc2, 0xc3,
-+	0xc4, 0xc5, 0xc6, 0xc7
-+};
-+static const u8 enc_nonce013[] __initconst = {
-+	0x07, 0x00, 0x00, 0x00, 0x40, 0x41, 0x42, 0x43,
-+	0x44, 0x45, 0x46, 0x47
-+};
-+static const u8 enc_key013[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input014[] __initconst = { };
-+static const u8 enc_output014[] __initconst = {
-+	0x76, 0xac, 0xb3, 0x42, 0xcf, 0x31, 0x66, 0xa5,
-+	0xb6, 0x3c, 0x0c, 0x0e, 0xa1, 0x38, 0x3c, 0x8d
-+};
-+static const u8 enc_assoc014[] __initconst = { };
-+static const u8 enc_nonce014[] __initconst = {
-+	0x4d, 0xa5, 0xbf, 0x8d, 0xfd, 0x58, 0x52, 0xc1,
-+	0xea, 0x12, 0x37, 0x9d
-+};
-+static const u8 enc_key014[] __initconst = {
-+	0x80, 0xba, 0x31, 0x92, 0xc8, 0x03, 0xce, 0x96,
-+	0x5e, 0xa3, 0x71, 0xd5, 0xff, 0x07, 0x3c, 0xf0,
-+	0xf4, 0x3b, 0x6a, 0x2a, 0xb5, 0x76, 0xb2, 0x08,
-+	0x42, 0x6e, 0x11, 0x40, 0x9c, 0x09, 0xb9, 0xb0
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input015[] __initconst = { };
-+static const u8 enc_output015[] __initconst = {
-+	0x90, 0x6f, 0xa6, 0x28, 0x4b, 0x52, 0xf8, 0x7b,
-+	0x73, 0x59, 0xcb, 0xaa, 0x75, 0x63, 0xc7, 0x09
-+};
-+static const u8 enc_assoc015[] __initconst = {
-+	0xbd, 0x50, 0x67, 0x64, 0xf2, 0xd2, 0xc4, 0x10
-+};
-+static const u8 enc_nonce015[] __initconst = {
-+	0xa9, 0x2e, 0xf0, 0xac, 0x99, 0x1d, 0xd5, 0x16,
-+	0xa3, 0xc6, 0xf6, 0x89
-+};
-+static const u8 enc_key015[] __initconst = {
-+	0x7a, 0x4c, 0xd7, 0x59, 0x17, 0x2e, 0x02, 0xeb,
-+	0x20, 0x4d, 0xb2, 0xc3, 0xf5, 0xc7, 0x46, 0x22,
-+	0x7d, 0xf5, 0x84, 0xfc, 0x13, 0x45, 0x19, 0x63,
-+	0x91, 0xdb, 0xb9, 0x57, 0x7a, 0x25, 0x07, 0x42
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input016[] __initconst = {
-+	0x2a
-+};
-+static const u8 enc_output016[] __initconst = {
-+	0x3a, 0xca, 0xc2, 0x7d, 0xec, 0x09, 0x68, 0x80,
-+	0x1e, 0x9f, 0x6e, 0xde, 0xd6, 0x9d, 0x80, 0x75,
-+	0x22
-+};
-+static const u8 enc_assoc016[] __initconst = { };
-+static const u8 enc_nonce016[] __initconst = {
-+	0x99, 0xe2, 0x3e, 0xc4, 0x89, 0x85, 0xbc, 0xcd,
-+	0xee, 0xab, 0x60, 0xf1
-+};
-+static const u8 enc_key016[] __initconst = {
-+	0xcc, 0x56, 0xb6, 0x80, 0x55, 0x2e, 0xb7, 0x50,
-+	0x08, 0xf5, 0x48, 0x4b, 0x4c, 0xb8, 0x03, 0xfa,
-+	0x50, 0x63, 0xeb, 0xd6, 0xea, 0xb9, 0x1f, 0x6a,
-+	0xb6, 0xae, 0xf4, 0x91, 0x6a, 0x76, 0x62, 0x73
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input017[] __initconst = {
-+	0x51
-+};
-+static const u8 enc_output017[] __initconst = {
-+	0xc4, 0x16, 0x83, 0x10, 0xca, 0x45, 0xb1, 0xf7,
-+	0xc6, 0x6c, 0xad, 0x4e, 0x99, 0xe4, 0x3f, 0x72,
-+	0xb9
-+};
-+static const u8 enc_assoc017[] __initconst = {
-+	0x91, 0xca, 0x6c, 0x59, 0x2c, 0xbc, 0xca, 0x53
-+};
-+static const u8 enc_nonce017[] __initconst = {
-+	0xab, 0x0d, 0xca, 0x71, 0x6e, 0xe0, 0x51, 0xd2,
-+	0x78, 0x2f, 0x44, 0x03
-+};
-+static const u8 enc_key017[] __initconst = {
-+	0x46, 0xf0, 0x25, 0x49, 0x65, 0xf7, 0x69, 0xd5,
-+	0x2b, 0xdb, 0x4a, 0x70, 0xb4, 0x43, 0x19, 0x9f,
-+	0x8e, 0xf2, 0x07, 0x52, 0x0d, 0x12, 0x20, 0xc5,
-+	0x5e, 0x4b, 0x70, 0xf0, 0xfd, 0xa6, 0x20, 0xee
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input018[] __initconst = {
-+	0x5c, 0x60
-+};
-+static const u8 enc_output018[] __initconst = {
-+	0x4d, 0x13, 0x91, 0xe8, 0xb6, 0x1e, 0xfb, 0x39,
-+	0xc1, 0x22, 0x19, 0x54, 0x53, 0x07, 0x7b, 0x22,
-+	0xe5, 0xe2
-+};
-+static const u8 enc_assoc018[] __initconst = { };
-+static const u8 enc_nonce018[] __initconst = {
-+	0x46, 0x1a, 0xf1, 0x22, 0xe9, 0xf2, 0xe0, 0x34,
-+	0x7e, 0x03, 0xf2, 0xdb
-+};
-+static const u8 enc_key018[] __initconst = {
-+	0x2f, 0x7f, 0x7e, 0x4f, 0x59, 0x2b, 0xb3, 0x89,
-+	0x19, 0x49, 0x89, 0x74, 0x35, 0x07, 0xbf, 0x3e,
-+	0xe9, 0xcb, 0xde, 0x17, 0x86, 0xb6, 0x69, 0x5f,
-+	0xe6, 0xc0, 0x25, 0xfd, 0x9b, 0xa4, 0xc1, 0x00
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input019[] __initconst = {
-+	0xdd, 0xf2
-+};
-+static const u8 enc_output019[] __initconst = {
-+	0xb6, 0x0d, 0xea, 0xd0, 0xfd, 0x46, 0x97, 0xec,
-+	0x2e, 0x55, 0x58, 0x23, 0x77, 0x19, 0xd0, 0x24,
-+	0x37, 0xa2
-+};
-+static const u8 enc_assoc019[] __initconst = {
-+	0x88, 0x36, 0x4f, 0xc8, 0x06, 0x05, 0x18, 0xbf
-+};
-+static const u8 enc_nonce019[] __initconst = {
-+	0x61, 0x54, 0x6b, 0xa5, 0xf1, 0x72, 0x05, 0x90,
-+	0xb6, 0x04, 0x0a, 0xc6
-+};
-+static const u8 enc_key019[] __initconst = {
-+	0xc8, 0x83, 0x3d, 0xce, 0x5e, 0xa9, 0xf2, 0x48,
-+	0xaa, 0x20, 0x30, 0xea, 0xcf, 0xe7, 0x2b, 0xff,
-+	0xe6, 0x9a, 0x62, 0x0c, 0xaf, 0x79, 0x33, 0x44,
-+	0xe5, 0x71, 0x8f, 0xe0, 0xd7, 0xab, 0x1a, 0x58
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input020[] __initconst = {
-+	0xab, 0x85, 0xe9, 0xc1, 0x57, 0x17, 0x31
-+};
-+static const u8 enc_output020[] __initconst = {
-+	0x5d, 0xfe, 0x34, 0x40, 0xdb, 0xb3, 0xc3, 0xed,
-+	0x7a, 0x43, 0x4e, 0x26, 0x02, 0xd3, 0x94, 0x28,
-+	0x1e, 0x0a, 0xfa, 0x9f, 0xb7, 0xaa, 0x42
-+};
-+static const u8 enc_assoc020[] __initconst = { };
-+static const u8 enc_nonce020[] __initconst = {
-+	0x3c, 0x4e, 0x65, 0x4d, 0x66, 0x3f, 0xa4, 0x59,
-+	0x6d, 0xc5, 0x5b, 0xb7
-+};
-+static const u8 enc_key020[] __initconst = {
-+	0x55, 0x56, 0x81, 0x58, 0xd3, 0xa6, 0x48, 0x3f,
-+	0x1f, 0x70, 0x21, 0xea, 0xb6, 0x9b, 0x70, 0x3f,
-+	0x61, 0x42, 0x51, 0xca, 0xdc, 0x1a, 0xf5, 0xd3,
-+	0x4a, 0x37, 0x4f, 0xdb, 0xfc, 0x5a, 0xda, 0xc7
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input021[] __initconst = {
-+	0x4e, 0xe5, 0xcd, 0xa2, 0x0d, 0x42, 0x90
-+};
-+static const u8 enc_output021[] __initconst = {
-+	0x4b, 0xd4, 0x72, 0x12, 0x94, 0x1c, 0xe3, 0x18,
-+	0x5f, 0x14, 0x08, 0xee, 0x7f, 0xbf, 0x18, 0xf5,
-+	0xab, 0xad, 0x6e, 0x22, 0x53, 0xa1, 0xba
-+};
-+static const u8 enc_assoc021[] __initconst = {
-+	0x84, 0xe4, 0x6b, 0xe8, 0xc0, 0x91, 0x90, 0x53
-+};
-+static const u8 enc_nonce021[] __initconst = {
-+	0x58, 0x38, 0x93, 0x75, 0xc6, 0x9e, 0xe3, 0x98,
-+	0xde, 0x94, 0x83, 0x96
-+};
-+static const u8 enc_key021[] __initconst = {
-+	0xe3, 0xc0, 0x9e, 0x7f, 0xab, 0x1a, 0xef, 0xb5,
-+	0x16, 0xda, 0x6a, 0x33, 0x02, 0x2a, 0x1d, 0xd4,
-+	0xeb, 0x27, 0x2c, 0x80, 0xd5, 0x40, 0xc5, 0xda,
-+	0x52, 0xa7, 0x30, 0xf3, 0x4d, 0x84, 0x0d, 0x7f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input022[] __initconst = {
-+	0xbe, 0x33, 0x08, 0xf7, 0x2a, 0x2c, 0x6a, 0xed
-+};
-+static const u8 enc_output022[] __initconst = {
-+	0x8e, 0x94, 0x39, 0xa5, 0x6e, 0xee, 0xc8, 0x17,
-+	0xfb, 0xe8, 0xa6, 0xed, 0x8f, 0xab, 0xb1, 0x93,
-+	0x75, 0x39, 0xdd, 0x6c, 0x00, 0xe9, 0x00, 0x21
-+};
-+static const u8 enc_assoc022[] __initconst = { };
-+static const u8 enc_nonce022[] __initconst = {
-+	0x4f, 0x07, 0xaf, 0xed, 0xfd, 0xc3, 0xb6, 0xc2,
-+	0x36, 0x18, 0x23, 0xd3
-+};
-+static const u8 enc_key022[] __initconst = {
-+	0x51, 0xe4, 0xbf, 0x2b, 0xad, 0x92, 0xb7, 0xaf,
-+	0xf1, 0xa4, 0xbc, 0x05, 0x55, 0x0b, 0xa8, 0x1d,
-+	0xf4, 0xb9, 0x6f, 0xab, 0xf4, 0x1c, 0x12, 0xc7,
-+	0xb0, 0x0e, 0x60, 0xe4, 0x8d, 0xb7, 0xe1, 0x52
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input023[] __initconst = {
-+	0xa4, 0xc9, 0xc2, 0x80, 0x1b, 0x71, 0xf7, 0xdf
-+};
-+static const u8 enc_output023[] __initconst = {
-+	0xb9, 0xb9, 0x10, 0x43, 0x3a, 0xf0, 0x52, 0xb0,
-+	0x45, 0x30, 0xf5, 0x1a, 0xee, 0xe0, 0x24, 0xe0,
-+	0xa4, 0x45, 0xa6, 0x32, 0x8f, 0xa6, 0x7a, 0x18
-+};
-+static const u8 enc_assoc023[] __initconst = {
-+	0x66, 0xc0, 0xae, 0x70, 0x07, 0x6c, 0xb1, 0x4d
-+};
-+static const u8 enc_nonce023[] __initconst = {
-+	0xb4, 0xea, 0x66, 0x6e, 0xe1, 0x19, 0x56, 0x33,
-+	0x66, 0x48, 0x4a, 0x78
-+};
-+static const u8 enc_key023[] __initconst = {
-+	0x11, 0x31, 0xc1, 0x41, 0x85, 0x77, 0xa0, 0x54,
-+	0xde, 0x7a, 0x4a, 0xc5, 0x51, 0x95, 0x0f, 0x1a,
-+	0x05, 0x3f, 0x9a, 0xe4, 0x6e, 0x5b, 0x75, 0xfe,
-+	0x4a, 0xbd, 0x56, 0x08, 0xd7, 0xcd, 0xda, 0xdd
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input024[] __initconst = {
-+	0x42, 0xba, 0xae, 0x59, 0x78, 0xfe, 0xaf, 0x5c,
-+	0x36, 0x8d, 0x14, 0xe0
-+};
-+static const u8 enc_output024[] __initconst = {
-+	0xff, 0x7d, 0xc2, 0x03, 0xb2, 0x6c, 0x46, 0x7a,
-+	0x6b, 0x50, 0xdb, 0x33, 0x57, 0x8c, 0x0f, 0x27,
-+	0x58, 0xc2, 0xe1, 0x4e, 0x36, 0xd4, 0xfc, 0x10,
-+	0x6d, 0xcb, 0x29, 0xb4
-+};
-+static const u8 enc_assoc024[] __initconst = { };
-+static const u8 enc_nonce024[] __initconst = {
-+	0x9a, 0x59, 0xfc, 0xe2, 0x6d, 0xf0, 0x00, 0x5e,
-+	0x07, 0x53, 0x86, 0x56
-+};
-+static const u8 enc_key024[] __initconst = {
-+	0x99, 0xb6, 0x2b, 0xd5, 0xaf, 0xbe, 0x3f, 0xb0,
-+	0x15, 0xbd, 0xe9, 0x3f, 0x0a, 0xbf, 0x48, 0x39,
-+	0x57, 0xa1, 0xc3, 0xeb, 0x3c, 0xa5, 0x9c, 0xb5,
-+	0x0b, 0x39, 0xf7, 0xf8, 0xa9, 0xcc, 0x51, 0xbe
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input025[] __initconst = {
-+	0xfd, 0xc8, 0x5b, 0x94, 0xa4, 0xb2, 0xa6, 0xb7,
-+	0x59, 0xb1, 0xa0, 0xda
-+};
-+static const u8 enc_output025[] __initconst = {
-+	0x9f, 0x88, 0x16, 0xde, 0x09, 0x94, 0xe9, 0x38,
-+	0xd9, 0xe5, 0x3f, 0x95, 0xd0, 0x86, 0xfc, 0x6c,
-+	0x9d, 0x8f, 0xa9, 0x15, 0xfd, 0x84, 0x23, 0xa7,
-+	0xcf, 0x05, 0x07, 0x2f
-+};
-+static const u8 enc_assoc025[] __initconst = {
-+	0xa5, 0x06, 0xe1, 0xa5, 0xc6, 0x90, 0x93, 0xf9
-+};
-+static const u8 enc_nonce025[] __initconst = {
-+	0x58, 0xdb, 0xd4, 0xad, 0x2c, 0x4a, 0xd3, 0x5d,
-+	0xd9, 0x06, 0xe9, 0xce
-+};
-+static const u8 enc_key025[] __initconst = {
-+	0x85, 0xf3, 0x5b, 0x62, 0x82, 0xcf, 0xf4, 0x40,
-+	0xbc, 0x10, 0x20, 0xc8, 0x13, 0x6f, 0xf2, 0x70,
-+	0x31, 0x11, 0x0f, 0xa6, 0x3e, 0xc1, 0x6f, 0x1e,
-+	0x82, 0x51, 0x18, 0xb0, 0x06, 0xb9, 0x12, 0x57
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input026[] __initconst = {
-+	0x51, 0xf8, 0xc1, 0xf7, 0x31, 0xea, 0x14, 0xac,
-+	0xdb, 0x21, 0x0a, 0x6d, 0x97, 0x3e, 0x07
-+};
-+static const u8 enc_output026[] __initconst = {
-+	0x0b, 0x29, 0x63, 0x8e, 0x1f, 0xbd, 0xd6, 0xdf,
-+	0x53, 0x97, 0x0b, 0xe2, 0x21, 0x00, 0x42, 0x2a,
-+	0x91, 0x34, 0x08, 0x7d, 0x67, 0xa4, 0x6e, 0x79,
-+	0x17, 0x8d, 0x0a, 0x93, 0xf5, 0xe1, 0xd2
-+};
-+static const u8 enc_assoc026[] __initconst = { };
-+static const u8 enc_nonce026[] __initconst = {
-+	0x68, 0xab, 0x7f, 0xdb, 0xf6, 0x19, 0x01, 0xda,
-+	0xd4, 0x61, 0xd2, 0x3c
-+};
-+static const u8 enc_key026[] __initconst = {
-+	0x67, 0x11, 0x96, 0x27, 0xbd, 0x98, 0x8e, 0xda,
-+	0x90, 0x62, 0x19, 0xe0, 0x8c, 0x0d, 0x0d, 0x77,
-+	0x9a, 0x07, 0xd2, 0x08, 0xce, 0x8a, 0x4f, 0xe0,
-+	0x70, 0x9a, 0xf7, 0x55, 0xee, 0xec, 0x6d, 0xcb
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input027[] __initconst = {
-+	0x97, 0x46, 0x9d, 0xa6, 0x67, 0xd6, 0x11, 0x0f,
-+	0x9c, 0xbd, 0xa1, 0xd1, 0xa2, 0x06, 0x73
-+};
-+static const u8 enc_output027[] __initconst = {
-+	0x32, 0xdb, 0x66, 0xc4, 0xa3, 0x81, 0x9d, 0x81,
-+	0x55, 0x74, 0x55, 0xe5, 0x98, 0x0f, 0xed, 0xfe,
-+	0xae, 0x30, 0xde, 0xc9, 0x4e, 0x6a, 0xd3, 0xa9,
-+	0xee, 0xa0, 0x6a, 0x0d, 0x70, 0x39, 0x17
-+};
-+static const u8 enc_assoc027[] __initconst = {
-+	0x64, 0x53, 0xa5, 0x33, 0x84, 0x63, 0x22, 0x12
-+};
-+static const u8 enc_nonce027[] __initconst = {
-+	0xd9, 0x5b, 0x32, 0x43, 0xaf, 0xae, 0xf7, 0x14,
-+	0xc5, 0x03, 0x5b, 0x6a
-+};
-+static const u8 enc_key027[] __initconst = {
-+	0xe6, 0xf1, 0x11, 0x8d, 0x41, 0xe4, 0xb4, 0x3f,
-+	0xb5, 0x82, 0x21, 0xb7, 0xed, 0x79, 0x67, 0x38,
-+	0x34, 0xe0, 0xd8, 0xac, 0x5c, 0x4f, 0xa6, 0x0b,
-+	0xbc, 0x8b, 0xc4, 0x89, 0x3a, 0x58, 0x89, 0x4d
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input028[] __initconst = {
-+	0x54, 0x9b, 0x36, 0x5a, 0xf9, 0x13, 0xf3, 0xb0,
-+	0x81, 0x13, 0x1c, 0xcb, 0x6b, 0x82, 0x55, 0x88
-+};
-+static const u8 enc_output028[] __initconst = {
-+	0xe9, 0x11, 0x0e, 0x9f, 0x56, 0xab, 0x3c, 0xa4,
-+	0x83, 0x50, 0x0c, 0xea, 0xba, 0xb6, 0x7a, 0x13,
-+	0x83, 0x6c, 0xca, 0xbf, 0x15, 0xa6, 0xa2, 0x2a,
-+	0x51, 0xc1, 0x07, 0x1c, 0xfa, 0x68, 0xfa, 0x0c
-+};
-+static const u8 enc_assoc028[] __initconst = { };
-+static const u8 enc_nonce028[] __initconst = {
-+	0x2f, 0xcb, 0x1b, 0x38, 0xa9, 0x9e, 0x71, 0xb8,
-+	0x47, 0x40, 0xad, 0x9b
-+};
-+static const u8 enc_key028[] __initconst = {
-+	0x59, 0xd4, 0xea, 0xfb, 0x4d, 0xe0, 0xcf, 0xc7,
-+	0xd3, 0xdb, 0x99, 0xa8, 0xf5, 0x4b, 0x15, 0xd7,
-+	0xb3, 0x9f, 0x0a, 0xcc, 0x8d, 0xa6, 0x97, 0x63,
-+	0xb0, 0x19, 0xc1, 0x69, 0x9f, 0x87, 0x67, 0x4a
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input029[] __initconst = {
-+	0x55, 0xa4, 0x65, 0x64, 0x4f, 0x5b, 0x65, 0x09,
-+	0x28, 0xcb, 0xee, 0x7c, 0x06, 0x32, 0x14, 0xd6
-+};
-+static const u8 enc_output029[] __initconst = {
-+	0xe4, 0xb1, 0x13, 0xcb, 0x77, 0x59, 0x45, 0xf3,
-+	0xd3, 0xa8, 0xae, 0x9e, 0xc1, 0x41, 0xc0, 0x0c,
-+	0x7c, 0x43, 0xf1, 0x6c, 0xe0, 0x96, 0xd0, 0xdc,
-+	0x27, 0xc9, 0x58, 0x49, 0xdc, 0x38, 0x3b, 0x7d
-+};
-+static const u8 enc_assoc029[] __initconst = {
-+	0x03, 0x45, 0x85, 0x62, 0x1a, 0xf8, 0xd7, 0xff
-+};
-+static const u8 enc_nonce029[] __initconst = {
-+	0x11, 0x8a, 0x69, 0x64, 0xc2, 0xd3, 0xe3, 0x80,
-+	0x07, 0x1f, 0x52, 0x66
-+};
-+static const u8 enc_key029[] __initconst = {
-+	0xb9, 0x07, 0xa4, 0x50, 0x75, 0x51, 0x3f, 0xe8,
-+	0xa8, 0x01, 0x9e, 0xde, 0xe3, 0xf2, 0x59, 0x14,
-+	0x87, 0xb2, 0xa0, 0x30, 0xb0, 0x3c, 0x6e, 0x1d,
-+	0x77, 0x1c, 0x86, 0x25, 0x71, 0xd2, 0xea, 0x1e
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input030[] __initconst = {
-+	0x3f, 0xf1, 0x51, 0x4b, 0x1c, 0x50, 0x39, 0x15,
-+	0x91, 0x8f, 0x0c, 0x0c, 0x31, 0x09, 0x4a, 0x6e,
-+	0x1f
-+};
-+static const u8 enc_output030[] __initconst = {
-+	0x02, 0xcc, 0x3a, 0xcb, 0x5e, 0xe1, 0xfc, 0xdd,
-+	0x12, 0xa0, 0x3b, 0xb8, 0x57, 0x97, 0x64, 0x74,
-+	0xd3, 0xd8, 0x3b, 0x74, 0x63, 0xa2, 0xc3, 0x80,
-+	0x0f, 0xe9, 0x58, 0xc2, 0x8e, 0xaa, 0x29, 0x08,
-+	0x13
-+};
-+static const u8 enc_assoc030[] __initconst = { };
-+static const u8 enc_nonce030[] __initconst = {
-+	0x45, 0xaa, 0xa3, 0xe5, 0xd1, 0x6d, 0x2d, 0x42,
-+	0xdc, 0x03, 0x44, 0x5d
-+};
-+static const u8 enc_key030[] __initconst = {
-+	0x3b, 0x24, 0x58, 0xd8, 0x17, 0x6e, 0x16, 0x21,
-+	0xc0, 0xcc, 0x24, 0xc0, 0xc0, 0xe2, 0x4c, 0x1e,
-+	0x80, 0xd7, 0x2f, 0x7e, 0xe9, 0x14, 0x9a, 0x4b,
-+	0x16, 0x61, 0x76, 0x62, 0x96, 0x16, 0xd0, 0x11
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input031[] __initconst = {
-+	0x63, 0x85, 0x8c, 0xa3, 0xe2, 0xce, 0x69, 0x88,
-+	0x7b, 0x57, 0x8a, 0x3c, 0x16, 0x7b, 0x42, 0x1c,
-+	0x9c
-+};
-+static const u8 enc_output031[] __initconst = {
-+	0x35, 0x76, 0x64, 0x88, 0xd2, 0xbc, 0x7c, 0x2b,
-+	0x8d, 0x17, 0xcb, 0xbb, 0x9a, 0xbf, 0xad, 0x9e,
-+	0x6d, 0x1f, 0x39, 0x1e, 0x65, 0x7b, 0x27, 0x38,
-+	0xdd, 0xa0, 0x84, 0x48, 0xcb, 0xa2, 0x81, 0x1c,
-+	0xeb
-+};
-+static const u8 enc_assoc031[] __initconst = {
-+	0x9a, 0xaf, 0x29, 0x9e, 0xee, 0xa7, 0x8f, 0x79
-+};
-+static const u8 enc_nonce031[] __initconst = {
-+	0xf0, 0x38, 0x4f, 0xb8, 0x76, 0x12, 0x14, 0x10,
-+	0x63, 0x3d, 0x99, 0x3d
-+};
-+static const u8 enc_key031[] __initconst = {
-+	0xf6, 0x0c, 0x6a, 0x1b, 0x62, 0x57, 0x25, 0xf7,
-+	0x6c, 0x70, 0x37, 0xb4, 0x8f, 0xe3, 0x57, 0x7f,
-+	0xa7, 0xf7, 0xb8, 0x7b, 0x1b, 0xd5, 0xa9, 0x82,
-+	0x17, 0x6d, 0x18, 0x23, 0x06, 0xff, 0xb8, 0x70
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input032[] __initconst = {
-+	0x10, 0xf1, 0xec, 0xf9, 0xc6, 0x05, 0x84, 0x66,
-+	0x5d, 0x9a, 0xe5, 0xef, 0xe2, 0x79, 0xe7, 0xf7,
-+	0x37, 0x7e, 0xea, 0x69, 0x16, 0xd2, 0xb1, 0x11
-+};
-+static const u8 enc_output032[] __initconst = {
-+	0x42, 0xf2, 0x6c, 0x56, 0xcb, 0x4b, 0xe2, 0x1d,
-+	0x9d, 0x8d, 0x0c, 0x80, 0xfc, 0x99, 0xdd, 0xe0,
-+	0x0d, 0x75, 0xf3, 0x80, 0x74, 0xbf, 0xe7, 0x64,
-+	0x54, 0xaa, 0x7e, 0x13, 0xd4, 0x8f, 0xff, 0x7d,
-+	0x75, 0x57, 0x03, 0x94, 0x57, 0x04, 0x0a, 0x3a
-+};
-+static const u8 enc_assoc032[] __initconst = { };
-+static const u8 enc_nonce032[] __initconst = {
-+	0xe6, 0xb1, 0xad, 0xf2, 0xfd, 0x58, 0xa8, 0x76,
-+	0x2c, 0x65, 0xf3, 0x1b
-+};
-+static const u8 enc_key032[] __initconst = {
-+	0x02, 0x12, 0xa8, 0xde, 0x50, 0x07, 0xed, 0x87,
-+	0xb3, 0x3f, 0x1a, 0x70, 0x90, 0xb6, 0x11, 0x4f,
-+	0x9e, 0x08, 0xce, 0xfd, 0x96, 0x07, 0xf2, 0xc2,
-+	0x76, 0xbd, 0xcf, 0xdb, 0xc5, 0xce, 0x9c, 0xd7
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input033[] __initconst = {
-+	0x92, 0x22, 0xf9, 0x01, 0x8e, 0x54, 0xfd, 0x6d,
-+	0xe1, 0x20, 0x08, 0x06, 0xa9, 0xee, 0x8e, 0x4c,
-+	0xc9, 0x04, 0xd2, 0x9f, 0x25, 0xcb, 0xa1, 0x93
-+};
-+static const u8 enc_output033[] __initconst = {
-+	0x12, 0x30, 0x32, 0x43, 0x7b, 0x4b, 0xfd, 0x69,
-+	0x20, 0xe8, 0xf7, 0xe7, 0xe0, 0x08, 0x7a, 0xe4,
-+	0x88, 0x9e, 0xbe, 0x7a, 0x0a, 0xd0, 0xe9, 0x00,
-+	0x3c, 0xf6, 0x8f, 0x17, 0x95, 0x50, 0xda, 0x63,
-+	0xd3, 0xb9, 0x6c, 0x2d, 0x55, 0x41, 0x18, 0x65
-+};
-+static const u8 enc_assoc033[] __initconst = {
-+	0x3e, 0x8b, 0xc5, 0xad, 0xe1, 0x82, 0xff, 0x08
-+};
-+static const u8 enc_nonce033[] __initconst = {
-+	0x6b, 0x28, 0x2e, 0xbe, 0xcc, 0x54, 0x1b, 0xcd,
-+	0x78, 0x34, 0xed, 0x55
-+};
-+static const u8 enc_key033[] __initconst = {
-+	0xc5, 0xbc, 0x09, 0x56, 0x56, 0x46, 0xe7, 0xed,
-+	0xda, 0x95, 0x4f, 0x1f, 0x73, 0x92, 0x23, 0xda,
-+	0xda, 0x20, 0xb9, 0x5c, 0x44, 0xab, 0x03, 0x3d,
-+	0x0f, 0xae, 0x4b, 0x02, 0x83, 0xd1, 0x8b, 0xe3
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input034[] __initconst = {
-+	0xb0, 0x53, 0x99, 0x92, 0x86, 0xa2, 0x82, 0x4f,
-+	0x42, 0xcc, 0x8c, 0x20, 0x3a, 0xb2, 0x4e, 0x2c,
-+	0x97, 0xa6, 0x85, 0xad, 0xcc, 0x2a, 0xd3, 0x26,
-+	0x62, 0x55, 0x8e, 0x55, 0xa5, 0xc7, 0x29
-+};
-+static const u8 enc_output034[] __initconst = {
-+	0x45, 0xc7, 0xd6, 0xb5, 0x3a, 0xca, 0xd4, 0xab,
-+	0xb6, 0x88, 0x76, 0xa6, 0xe9, 0x6a, 0x48, 0xfb,
-+	0x59, 0x52, 0x4d, 0x2c, 0x92, 0xc9, 0xd8, 0xa1,
-+	0x89, 0xc9, 0xfd, 0x2d, 0xb9, 0x17, 0x46, 0x56,
-+	0x6d, 0x3c, 0xa1, 0x0e, 0x31, 0x1b, 0x69, 0x5f,
-+	0x3e, 0xae, 0x15, 0x51, 0x65, 0x24, 0x93
-+};
-+static const u8 enc_assoc034[] __initconst = { };
-+static const u8 enc_nonce034[] __initconst = {
-+	0x04, 0xa9, 0xbe, 0x03, 0x50, 0x8a, 0x5f, 0x31,
-+	0x37, 0x1a, 0x6f, 0xd2
-+};
-+static const u8 enc_key034[] __initconst = {
-+	0x2e, 0xb5, 0x1c, 0x46, 0x9a, 0xa8, 0xeb, 0x9e,
-+	0x6c, 0x54, 0xa8, 0x34, 0x9b, 0xae, 0x50, 0xa2,
-+	0x0f, 0x0e, 0x38, 0x27, 0x11, 0xbb, 0xa1, 0x15,
-+	0x2c, 0x42, 0x4f, 0x03, 0xb6, 0x67, 0x1d, 0x71
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input035[] __initconst = {
-+	0xf4, 0x52, 0x06, 0xab, 0xc2, 0x55, 0x52, 0xb2,
-+	0xab, 0xc9, 0xab, 0x7f, 0xa2, 0x43, 0x03, 0x5f,
-+	0xed, 0xaa, 0xdd, 0xc3, 0xb2, 0x29, 0x39, 0x56,
-+	0xf1, 0xea, 0x6e, 0x71, 0x56, 0xe7, 0xeb
-+};
-+static const u8 enc_output035[] __initconst = {
-+	0x46, 0xa8, 0x0c, 0x41, 0x87, 0x02, 0x47, 0x20,
-+	0x08, 0x46, 0x27, 0x58, 0x00, 0x80, 0xdd, 0xe5,
-+	0xa3, 0xf4, 0xa1, 0x10, 0x93, 0xa7, 0x07, 0x6e,
-+	0xd6, 0xf3, 0xd3, 0x26, 0xbc, 0x7b, 0x70, 0x53,
-+	0x4d, 0x4a, 0xa2, 0x83, 0x5a, 0x52, 0xe7, 0x2d,
-+	0x14, 0xdf, 0x0e, 0x4f, 0x47, 0xf2, 0x5f
-+};
-+static const u8 enc_assoc035[] __initconst = {
-+	0x37, 0x46, 0x18, 0xa0, 0x6e, 0xa9, 0x8a, 0x48
-+};
-+static const u8 enc_nonce035[] __initconst = {
-+	0x47, 0x0a, 0x33, 0x9e, 0xcb, 0x32, 0x19, 0xb8,
-+	0xb8, 0x1a, 0x1f, 0x8b
-+};
-+static const u8 enc_key035[] __initconst = {
-+	0x7f, 0x5b, 0x74, 0xc0, 0x7e, 0xd1, 0xb4, 0x0f,
-+	0xd1, 0x43, 0x58, 0xfe, 0x2f, 0xf2, 0xa7, 0x40,
-+	0xc1, 0x16, 0xc7, 0x70, 0x65, 0x10, 0xe6, 0xa4,
-+	0x37, 0xf1, 0x9e, 0xa4, 0x99, 0x11, 0xce, 0xc4
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input036[] __initconst = {
-+	0xb9, 0xc5, 0x54, 0xcb, 0xc3, 0x6a, 0xc1, 0x8a,
-+	0xe8, 0x97, 0xdf, 0x7b, 0xee, 0xca, 0xc1, 0xdb,
-+	0xeb, 0x4e, 0xaf, 0xa1, 0x56, 0xbb, 0x60, 0xce,
-+	0x2e, 0x5d, 0x48, 0xf0, 0x57, 0x15, 0xe6, 0x78
-+};
-+static const u8 enc_output036[] __initconst = {
-+	0xea, 0x29, 0xaf, 0xa4, 0x9d, 0x36, 0xe8, 0x76,
-+	0x0f, 0x5f, 0xe1, 0x97, 0x23, 0xb9, 0x81, 0x1e,
-+	0xd5, 0xd5, 0x19, 0x93, 0x4a, 0x44, 0x0f, 0x50,
-+	0x81, 0xac, 0x43, 0x0b, 0x95, 0x3b, 0x0e, 0x21,
-+	0x22, 0x25, 0x41, 0xaf, 0x46, 0xb8, 0x65, 0x33,
-+	0xc6, 0xb6, 0x8d, 0x2f, 0xf1, 0x08, 0xa7, 0xea
-+};
-+static const u8 enc_assoc036[] __initconst = { };
-+static const u8 enc_nonce036[] __initconst = {
-+	0x72, 0xcf, 0xd9, 0x0e, 0xf3, 0x02, 0x6c, 0xa2,
-+	0x2b, 0x7e, 0x6e, 0x6a
-+};
-+static const u8 enc_key036[] __initconst = {
-+	0xe1, 0x73, 0x1d, 0x58, 0x54, 0xe1, 0xb7, 0x0c,
-+	0xb3, 0xff, 0xe8, 0xb7, 0x86, 0xa2, 0xb3, 0xeb,
-+	0xf0, 0x99, 0x43, 0x70, 0x95, 0x47, 0x57, 0xb9,
-+	0xdc, 0x8c, 0x7b, 0xc5, 0x35, 0x46, 0x34, 0xa3
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input037[] __initconst = {
-+	0x6b, 0x26, 0x04, 0x99, 0x6c, 0xd3, 0x0c, 0x14,
-+	0xa1, 0x3a, 0x52, 0x57, 0xed, 0x6c, 0xff, 0xd3,
-+	0xbc, 0x5e, 0x29, 0xd6, 0xb9, 0x7e, 0xb1, 0x79,
-+	0x9e, 0xb3, 0x35, 0xe2, 0x81, 0xea, 0x45, 0x1e
-+};
-+static const u8 enc_output037[] __initconst = {
-+	0x6d, 0xad, 0x63, 0x78, 0x97, 0x54, 0x4d, 0x8b,
-+	0xf6, 0xbe, 0x95, 0x07, 0xed, 0x4d, 0x1b, 0xb2,
-+	0xe9, 0x54, 0xbc, 0x42, 0x7e, 0x5d, 0xe7, 0x29,
-+	0xda, 0xf5, 0x07, 0x62, 0x84, 0x6f, 0xf2, 0xf4,
-+	0x7b, 0x99, 0x7d, 0x93, 0xc9, 0x82, 0x18, 0x9d,
-+	0x70, 0x95, 0xdc, 0x79, 0x4c, 0x74, 0x62, 0x32
-+};
-+static const u8 enc_assoc037[] __initconst = {
-+	0x23, 0x33, 0xe5, 0xce, 0x0f, 0x93, 0xb0, 0x59
-+};
-+static const u8 enc_nonce037[] __initconst = {
-+	0x26, 0x28, 0x80, 0xd4, 0x75, 0xf3, 0xda, 0xc5,
-+	0x34, 0x0d, 0xd1, 0xb8
-+};
-+static const u8 enc_key037[] __initconst = {
-+	0x27, 0xd8, 0x60, 0x63, 0x1b, 0x04, 0x85, 0xa4,
-+	0x10, 0x70, 0x2f, 0xea, 0x61, 0xbc, 0x87, 0x3f,
-+	0x34, 0x42, 0x26, 0x0c, 0xad, 0xed, 0x4a, 0xbd,
-+	0xe2, 0x5b, 0x78, 0x6a, 0x2d, 0x97, 0xf1, 0x45
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input038[] __initconst = {
-+	0x97, 0x3d, 0x0c, 0x75, 0x38, 0x26, 0xba, 0xe4,
-+	0x66, 0xcf, 0x9a, 0xbb, 0x34, 0x93, 0x15, 0x2e,
-+	0x9d, 0xe7, 0x81, 0x9e, 0x2b, 0xd0, 0xc7, 0x11,
-+	0x71, 0x34, 0x6b, 0x4d, 0x2c, 0xeb, 0xf8, 0x04,
-+	0x1a, 0xa3, 0xce, 0xdc, 0x0d, 0xfd, 0x7b, 0x46,
-+	0x7e, 0x26, 0x22, 0x8b, 0xc8, 0x6c, 0x9a
-+};
-+static const u8 enc_output038[] __initconst = {
-+	0xfb, 0xa7, 0x8a, 0xe4, 0xf9, 0xd8, 0x08, 0xa6,
-+	0x2e, 0x3d, 0xa4, 0x0b, 0xe2, 0xcb, 0x77, 0x00,
-+	0xc3, 0x61, 0x3d, 0x9e, 0xb2, 0xc5, 0x29, 0xc6,
-+	0x52, 0xe7, 0x6a, 0x43, 0x2c, 0x65, 0x8d, 0x27,
-+	0x09, 0x5f, 0x0e, 0xb8, 0xf9, 0x40, 0xc3, 0x24,
-+	0x98, 0x1e, 0xa9, 0x35, 0xe5, 0x07, 0xf9, 0x8f,
-+	0x04, 0x69, 0x56, 0xdb, 0x3a, 0x51, 0x29, 0x08,
-+	0xbd, 0x7a, 0xfc, 0x8f, 0x2a, 0xb0, 0xa9
-+};
-+static const u8 enc_assoc038[] __initconst = { };
-+static const u8 enc_nonce038[] __initconst = {
-+	0xe7, 0x4a, 0x51, 0x5e, 0x7e, 0x21, 0x02, 0xb9,
-+	0x0b, 0xef, 0x55, 0xd2
-+};
-+static const u8 enc_key038[] __initconst = {
-+	0xcf, 0x0d, 0x40, 0xa4, 0x64, 0x4e, 0x5f, 0x51,
-+	0x81, 0x51, 0x65, 0xd5, 0x30, 0x1b, 0x22, 0x63,
-+	0x1f, 0x45, 0x44, 0xc4, 0x9a, 0x18, 0x78, 0xe3,
-+	0xa0, 0xa5, 0xe8, 0xe1, 0xaa, 0xe0, 0xf2, 0x64
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input039[] __initconst = {
-+	0xa9, 0x89, 0x95, 0x50, 0x4d, 0xf1, 0x6f, 0x74,
-+	0x8b, 0xfb, 0x77, 0x85, 0xff, 0x91, 0xee, 0xb3,
-+	0xb6, 0x60, 0xea, 0x9e, 0xd3, 0x45, 0x0c, 0x3d,
-+	0x5e, 0x7b, 0x0e, 0x79, 0xef, 0x65, 0x36, 0x59,
-+	0xa9, 0x97, 0x8d, 0x75, 0x54, 0x2e, 0xf9, 0x1c,
-+	0x45, 0x67, 0x62, 0x21, 0x56, 0x40, 0xb9
-+};
-+static const u8 enc_output039[] __initconst = {
-+	0xa1, 0xff, 0xed, 0x80, 0x76, 0x18, 0x29, 0xec,
-+	0xce, 0x24, 0x2e, 0x0e, 0x88, 0xb1, 0x38, 0x04,
-+	0x90, 0x16, 0xbc, 0xa0, 0x18, 0xda, 0x2b, 0x6e,
-+	0x19, 0x98, 0x6b, 0x3e, 0x31, 0x8c, 0xae, 0x8d,
-+	0x80, 0x61, 0x98, 0xfb, 0x4c, 0x52, 0x7c, 0xc3,
-+	0x93, 0x50, 0xeb, 0xdd, 0xea, 0xc5, 0x73, 0xc4,
-+	0xcb, 0xf0, 0xbe, 0xfd, 0xa0, 0xb7, 0x02, 0x42,
-+	0xc6, 0x40, 0xd7, 0xcd, 0x02, 0xd7, 0xa3
-+};
-+static const u8 enc_assoc039[] __initconst = {
-+	0xb3, 0xe4, 0x06, 0x46, 0x83, 0xb0, 0x2d, 0x84
-+};
-+static const u8 enc_nonce039[] __initconst = {
-+	0xd4, 0xd8, 0x07, 0x34, 0x16, 0x83, 0x82, 0x5b,
-+	0x31, 0xcd, 0x4d, 0x95
-+};
-+static const u8 enc_key039[] __initconst = {
-+	0x6c, 0xbf, 0xd7, 0x1c, 0x64, 0x5d, 0x18, 0x4c,
-+	0xf5, 0xd2, 0x3c, 0x40, 0x2b, 0xdb, 0x0d, 0x25,
-+	0xec, 0x54, 0x89, 0x8c, 0x8a, 0x02, 0x73, 0xd4,
-+	0x2e, 0xb5, 0xbe, 0x10, 0x9f, 0xdc, 0xb2, 0xac
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input040[] __initconst = {
-+	0xd0, 0x96, 0x80, 0x31, 0x81, 0xbe, 0xef, 0x9e,
-+	0x00, 0x8f, 0xf8, 0x5d, 0x5d, 0xdc, 0x38, 0xdd,
-+	0xac, 0xf0, 0xf0, 0x9e, 0xe5, 0xf7, 0xe0, 0x7f,
-+	0x1e, 0x40, 0x79, 0xcb, 0x64, 0xd0, 0xdc, 0x8f,
-+	0x5e, 0x67, 0x11, 0xcd, 0x49, 0x21, 0xa7, 0x88,
-+	0x7d, 0xe7, 0x6e, 0x26, 0x78, 0xfd, 0xc6, 0x76,
-+	0x18, 0xf1, 0x18, 0x55, 0x86, 0xbf, 0xea, 0x9d,
-+	0x4c, 0x68, 0x5d, 0x50, 0xe4, 0xbb, 0x9a, 0x82
-+};
-+static const u8 enc_output040[] __initconst = {
-+	0x9a, 0x4e, 0xf2, 0x2b, 0x18, 0x16, 0x77, 0xb5,
-+	0x75, 0x5c, 0x08, 0xf7, 0x47, 0xc0, 0xf8, 0xd8,
-+	0xe8, 0xd4, 0xc1, 0x8a, 0x9c, 0xc2, 0x40, 0x5c,
-+	0x12, 0xbb, 0x51, 0xbb, 0x18, 0x72, 0xc8, 0xe8,
-+	0xb8, 0x77, 0x67, 0x8b, 0xec, 0x44, 0x2c, 0xfc,
-+	0xbb, 0x0f, 0xf4, 0x64, 0xa6, 0x4b, 0x74, 0x33,
-+	0x2c, 0xf0, 0x72, 0x89, 0x8c, 0x7e, 0x0e, 0xdd,
-+	0xf6, 0x23, 0x2e, 0xa6, 0xe2, 0x7e, 0xfe, 0x50,
-+	0x9f, 0xf3, 0x42, 0x7a, 0x0f, 0x32, 0xfa, 0x56,
-+	0x6d, 0x9c, 0xa0, 0xa7, 0x8a, 0xef, 0xc0, 0x13
-+};
-+static const u8 enc_assoc040[] __initconst = { };
-+static const u8 enc_nonce040[] __initconst = {
-+	0xd6, 0x10, 0x40, 0xa3, 0x13, 0xed, 0x49, 0x28,
-+	0x23, 0xcc, 0x06, 0x5b
-+};
-+static const u8 enc_key040[] __initconst = {
-+	0x5b, 0x1d, 0x10, 0x35, 0xc0, 0xb1, 0x7e, 0xe0,
-+	0xb0, 0x44, 0x47, 0x67, 0xf8, 0x0a, 0x25, 0xb8,
-+	0xc1, 0xb7, 0x41, 0xf4, 0xb5, 0x0a, 0x4d, 0x30,
-+	0x52, 0x22, 0x6b, 0xaa, 0x1c, 0x6f, 0xb7, 0x01
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input041[] __initconst = {
-+	0x94, 0xee, 0x16, 0x6d, 0x6d, 0x6e, 0xcf, 0x88,
-+	0x32, 0x43, 0x71, 0x36, 0xb4, 0xae, 0x80, 0x5d,
-+	0x42, 0x88, 0x64, 0x35, 0x95, 0x86, 0xd9, 0x19,
-+	0x3a, 0x25, 0x01, 0x62, 0x93, 0xed, 0xba, 0x44,
-+	0x3c, 0x58, 0xe0, 0x7e, 0x7b, 0x71, 0x95, 0xec,
-+	0x5b, 0xd8, 0x45, 0x82, 0xa9, 0xd5, 0x6c, 0x8d,
-+	0x4a, 0x10, 0x8c, 0x7d, 0x7c, 0xe3, 0x4e, 0x6c,
-+	0x6f, 0x8e, 0xa1, 0xbe, 0xc0, 0x56, 0x73, 0x17
-+};
-+static const u8 enc_output041[] __initconst = {
-+	0x5f, 0xbb, 0xde, 0xcc, 0x34, 0xbe, 0x20, 0x16,
-+	0x14, 0xf6, 0x36, 0x03, 0x1e, 0xeb, 0x42, 0xf1,
-+	0xca, 0xce, 0x3c, 0x79, 0xa1, 0x2c, 0xff, 0xd8,
-+	0x71, 0xee, 0x8e, 0x73, 0x82, 0x0c, 0x82, 0x97,
-+	0x49, 0xf1, 0xab, 0xb4, 0x29, 0x43, 0x67, 0x84,
-+	0x9f, 0xb6, 0xc2, 0xaa, 0x56, 0xbd, 0xa8, 0xa3,
-+	0x07, 0x8f, 0x72, 0x3d, 0x7c, 0x1c, 0x85, 0x20,
-+	0x24, 0xb0, 0x17, 0xb5, 0x89, 0x73, 0xfb, 0x1e,
-+	0x09, 0x26, 0x3d, 0xa7, 0xb4, 0xcb, 0x92, 0x14,
-+	0x52, 0xf9, 0x7d, 0xca, 0x40, 0xf5, 0x80, 0xec
-+};
-+static const u8 enc_assoc041[] __initconst = {
-+	0x71, 0x93, 0xf6, 0x23, 0x66, 0x33, 0x21, 0xa2
-+};
-+static const u8 enc_nonce041[] __initconst = {
-+	0xd3, 0x1c, 0x21, 0xab, 0xa1, 0x75, 0xb7, 0x0d,
-+	0xe4, 0xeb, 0xb1, 0x9c
-+};
-+static const u8 enc_key041[] __initconst = {
-+	0x97, 0xd6, 0x35, 0xc4, 0xf4, 0x75, 0x74, 0xd9,
-+	0x99, 0x8a, 0x90, 0x87, 0x5d, 0xa1, 0xd3, 0xa2,
-+	0x84, 0xb7, 0x55, 0xb2, 0xd3, 0x92, 0x97, 0xa5,
-+	0x72, 0x52, 0x35, 0x19, 0x0e, 0x10, 0xa9, 0x7e
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input042[] __initconst = {
-+	0xb4, 0x29, 0xeb, 0x80, 0xfb, 0x8f, 0xe8, 0xba,
-+	0xed, 0xa0, 0xc8, 0x5b, 0x9c, 0x33, 0x34, 0x58,
-+	0xe7, 0xc2, 0x99, 0x2e, 0x55, 0x84, 0x75, 0x06,
-+	0x9d, 0x12, 0xd4, 0x5c, 0x22, 0x21, 0x75, 0x64,
-+	0x12, 0x15, 0x88, 0x03, 0x22, 0x97, 0xef, 0xf5,
-+	0x67, 0x83, 0x74, 0x2a, 0x5f, 0xc2, 0x2d, 0x74,
-+	0x10, 0xff, 0xb2, 0x9d, 0x66, 0x09, 0x86, 0x61,
-+	0xd7, 0x6f, 0x12, 0x6c, 0x3c, 0x27, 0x68, 0x9e,
-+	0x43, 0xb3, 0x72, 0x67, 0xca, 0xc5, 0xa3, 0xa6,
-+	0xd3, 0xab, 0x49, 0xe3, 0x91, 0xda, 0x29, 0xcd,
-+	0x30, 0x54, 0xa5, 0x69, 0x2e, 0x28, 0x07, 0xe4,
-+	0xc3, 0xea, 0x46, 0xc8, 0x76, 0x1d, 0x50, 0xf5,
-+	0x92
-+};
-+static const u8 enc_output042[] __initconst = {
-+	0xd0, 0x10, 0x2f, 0x6c, 0x25, 0x8b, 0xf4, 0x97,
-+	0x42, 0xce, 0xc3, 0x4c, 0xf2, 0xd0, 0xfe, 0xdf,
-+	0x23, 0xd1, 0x05, 0xfb, 0x4c, 0x84, 0xcf, 0x98,
-+	0x51, 0x5e, 0x1b, 0xc9, 0xa6, 0x4f, 0x8a, 0xd5,
-+	0xbe, 0x8f, 0x07, 0x21, 0xbd, 0xe5, 0x06, 0x45,
-+	0xd0, 0x00, 0x83, 0xc3, 0xa2, 0x63, 0xa3, 0x10,
-+	0x53, 0xb7, 0x60, 0x24, 0x5f, 0x52, 0xae, 0x28,
-+	0x66, 0xa5, 0xec, 0x83, 0xb1, 0x9f, 0x61, 0xbe,
-+	0x1d, 0x30, 0xd5, 0xc5, 0xd9, 0xfe, 0xcc, 0x4c,
-+	0xbb, 0xe0, 0x8f, 0xd3, 0x85, 0x81, 0x3a, 0x2a,
-+	0xa3, 0x9a, 0x00, 0xff, 0x9c, 0x10, 0xf7, 0xf2,
-+	0x37, 0x02, 0xad, 0xd1, 0xe4, 0xb2, 0xff, 0xa3,
-+	0x1c, 0x41, 0x86, 0x5f, 0xc7, 0x1d, 0xe1, 0x2b,
-+	0x19, 0x61, 0x21, 0x27, 0xce, 0x49, 0x99, 0x3b,
-+	0xb0
-+};
-+static const u8 enc_assoc042[] __initconst = { };
-+static const u8 enc_nonce042[] __initconst = {
-+	0x17, 0xc8, 0x6a, 0x8a, 0xbb, 0xb7, 0xe0, 0x03,
-+	0xac, 0xde, 0x27, 0x99
-+};
-+static const u8 enc_key042[] __initconst = {
-+	0xfe, 0x6e, 0x55, 0xbd, 0xae, 0xd1, 0xf7, 0x28,
-+	0x4c, 0xa5, 0xfc, 0x0f, 0x8c, 0x5f, 0x2b, 0x8d,
-+	0xf5, 0x6d, 0xc0, 0xf4, 0x9e, 0x8c, 0xa6, 0x6a,
-+	0x41, 0x99, 0x5e, 0x78, 0x33, 0x51, 0xf9, 0x01
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input043[] __initconst = {
-+	0xce, 0xb5, 0x34, 0xce, 0x50, 0xdc, 0x23, 0xff,
-+	0x63, 0x8a, 0xce, 0x3e, 0xf6, 0x3a, 0xb2, 0xcc,
-+	0x29, 0x73, 0xee, 0xad, 0xa8, 0x07, 0x85, 0xfc,
-+	0x16, 0x5d, 0x06, 0xc2, 0xf5, 0x10, 0x0f, 0xf5,
-+	0xe8, 0xab, 0x28, 0x82, 0xc4, 0x75, 0xaf, 0xcd,
-+	0x05, 0xcc, 0xd4, 0x9f, 0x2e, 0x7d, 0x8f, 0x55,
-+	0xef, 0x3a, 0x72, 0xe3, 0xdc, 0x51, 0xd6, 0x85,
-+	0x2b, 0x8e, 0x6b, 0x9e, 0x7a, 0xec, 0xe5, 0x7b,
-+	0xe6, 0x55, 0x6b, 0x0b, 0x6d, 0x94, 0x13, 0xe3,
-+	0x3f, 0xc5, 0xfc, 0x24, 0xa9, 0xa2, 0x05, 0xad,
-+	0x59, 0x57, 0x4b, 0xb3, 0x9d, 0x94, 0x4a, 0x92,
-+	0xdc, 0x47, 0x97, 0x0d, 0x84, 0xa6, 0xad, 0x31,
-+	0x76
-+};
-+static const u8 enc_output043[] __initconst = {
-+	0x75, 0x45, 0x39, 0x1b, 0x51, 0xde, 0x01, 0xd5,
-+	0xc5, 0x3d, 0xfa, 0xca, 0x77, 0x79, 0x09, 0x06,
-+	0x3e, 0x58, 0xed, 0xee, 0x4b, 0xb1, 0x22, 0x7e,
-+	0x71, 0x10, 0xac, 0x4d, 0x26, 0x20, 0xc2, 0xae,
-+	0xc2, 0xf8, 0x48, 0xf5, 0x6d, 0xee, 0xb0, 0x37,
-+	0xa8, 0xdc, 0xed, 0x75, 0xaf, 0xa8, 0xa6, 0xc8,
-+	0x90, 0xe2, 0xde, 0xe4, 0x2f, 0x95, 0x0b, 0xb3,
-+	0x3d, 0x9e, 0x24, 0x24, 0xd0, 0x8a, 0x50, 0x5d,
-+	0x89, 0x95, 0x63, 0x97, 0x3e, 0xd3, 0x88, 0x70,
-+	0xf3, 0xde, 0x6e, 0xe2, 0xad, 0xc7, 0xfe, 0x07,
-+	0x2c, 0x36, 0x6c, 0x14, 0xe2, 0xcf, 0x7c, 0xa6,
-+	0x2f, 0xb3, 0xd3, 0x6b, 0xee, 0x11, 0x68, 0x54,
-+	0x61, 0xb7, 0x0d, 0x44, 0xef, 0x8c, 0x66, 0xc5,
-+	0xc7, 0xbb, 0xf1, 0x0d, 0xca, 0xdd, 0x7f, 0xac,
-+	0xf6
-+};
-+static const u8 enc_assoc043[] __initconst = {
-+	0xa1, 0x1c, 0x40, 0xb6, 0x03, 0x76, 0x73, 0x30
-+};
-+static const u8 enc_nonce043[] __initconst = {
-+	0x46, 0x36, 0x2f, 0x45, 0xd6, 0x37, 0x9e, 0x63,
-+	0xe5, 0x22, 0x94, 0x60
-+};
-+static const u8 enc_key043[] __initconst = {
-+	0xaa, 0xbc, 0x06, 0x34, 0x74, 0xe6, 0x5c, 0x4c,
-+	0x3e, 0x9b, 0xdc, 0x48, 0x0d, 0xea, 0x97, 0xb4,
-+	0x51, 0x10, 0xc8, 0x61, 0x88, 0x46, 0xff, 0x6b,
-+	0x15, 0xbd, 0xd2, 0xa4, 0xa5, 0x68, 0x2c, 0x4e
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input044[] __initconst = {
-+	0xe5, 0xcc, 0xaa, 0x44, 0x1b, 0xc8, 0x14, 0x68,
-+	0x8f, 0x8f, 0x6e, 0x8f, 0x28, 0xb5, 0x00, 0xb2
-+};
-+static const u8 enc_output044[] __initconst = {
-+	0x7e, 0x72, 0xf5, 0xa1, 0x85, 0xaf, 0x16, 0xa6,
-+	0x11, 0x92, 0x1b, 0x43, 0x8f, 0x74, 0x9f, 0x0b,
-+	0x12, 0x42, 0xc6, 0x70, 0x73, 0x23, 0x34, 0x02,
-+	0x9a, 0xdf, 0xe1, 0xc5, 0x00, 0x16, 0x51, 0xe4
-+};
-+static const u8 enc_assoc044[] __initconst = {
-+	0x02
-+};
-+static const u8 enc_nonce044[] __initconst = {
-+	0x87, 0x34, 0x5f, 0x10, 0x55, 0xfd, 0x9e, 0x21,
-+	0x02, 0xd5, 0x06, 0x56
-+};
-+static const u8 enc_key044[] __initconst = {
-+	0x7d, 0x00, 0xb4, 0x80, 0x95, 0xad, 0xfa, 0x32,
-+	0x72, 0x05, 0x06, 0x07, 0xb2, 0x64, 0x18, 0x50,
-+	0x02, 0xba, 0x99, 0x95, 0x7c, 0x49, 0x8b, 0xe0,
-+	0x22, 0x77, 0x0f, 0x2c, 0xe2, 0xf3, 0x14, 0x3c
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input045[] __initconst = {
-+	0x02, 0xcd, 0xe1, 0x68, 0xfb, 0xa3, 0xf5, 0x44,
-+	0xbb, 0xd0, 0x33, 0x2f, 0x7a, 0xde, 0xad, 0xa8
-+};
-+static const u8 enc_output045[] __initconst = {
-+	0x85, 0xf2, 0x9a, 0x71, 0x95, 0x57, 0xcd, 0xd1,
-+	0x4d, 0x1f, 0x8f, 0xff, 0xab, 0x6d, 0x9e, 0x60,
-+	0x73, 0x2c, 0xa3, 0x2b, 0xec, 0xd5, 0x15, 0xa1,
-+	0xed, 0x35, 0x3f, 0x54, 0x2e, 0x99, 0x98, 0x58
-+};
-+static const u8 enc_assoc045[] __initconst = {
-+	0xb6, 0x48
-+};
-+static const u8 enc_nonce045[] __initconst = {
-+	0x87, 0xa3, 0x16, 0x3e, 0xc0, 0x59, 0x8a, 0xd9,
-+	0x5b, 0x3a, 0xa7, 0x13
-+};
-+static const u8 enc_key045[] __initconst = {
-+	0x64, 0x32, 0x71, 0x7f, 0x1d, 0xb8, 0x5e, 0x41,
-+	0xac, 0x78, 0x36, 0xbc, 0xe2, 0x51, 0x85, 0xa0,
-+	0x80, 0xd5, 0x76, 0x2b, 0x9e, 0x2b, 0x18, 0x44,
-+	0x4b, 0x6e, 0xc7, 0x2c, 0x3b, 0xd8, 0xe4, 0xdc
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input046[] __initconst = {
-+	0x16, 0xdd, 0xd2, 0x3f, 0xf5, 0x3f, 0x3d, 0x23,
-+	0xc0, 0x63, 0x34, 0x48, 0x70, 0x40, 0xeb, 0x47
-+};
-+static const u8 enc_output046[] __initconst = {
-+	0xc1, 0xb2, 0x95, 0x93, 0x6d, 0x56, 0xfa, 0xda,
-+	0xc0, 0x3e, 0x5f, 0x74, 0x2b, 0xff, 0x73, 0xa1,
-+	0x39, 0xc4, 0x57, 0xdb, 0xab, 0x66, 0x38, 0x2b,
-+	0xab, 0xb3, 0xb5, 0x58, 0x00, 0xcd, 0xa5, 0xb8
-+};
-+static const u8 enc_assoc046[] __initconst = {
-+	0xbd, 0x4c, 0xd0, 0x2f, 0xc7, 0x50, 0x2b, 0xbd,
-+	0xbd, 0xf6, 0xc9, 0xa3, 0xcb, 0xe8, 0xf0
-+};
-+static const u8 enc_nonce046[] __initconst = {
-+	0x6f, 0x57, 0x3a, 0xa8, 0x6b, 0xaa, 0x49, 0x2b,
-+	0xa4, 0x65, 0x96, 0xdf
-+};
-+static const u8 enc_key046[] __initconst = {
-+	0x8e, 0x34, 0xcf, 0x73, 0xd2, 0x45, 0xa1, 0x08,
-+	0x2a, 0x92, 0x0b, 0x86, 0x36, 0x4e, 0xb8, 0x96,
-+	0xc4, 0x94, 0x64, 0x67, 0xbc, 0xb3, 0xd5, 0x89,
-+	0x29, 0xfc, 0xb3, 0x66, 0x90, 0xe6, 0x39, 0x4f
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input047[] __initconst = {
-+	0x62, 0x3b, 0x78, 0x50, 0xc3, 0x21, 0xe2, 0xcf,
-+	0x0c, 0x6f, 0xbc, 0xc8, 0xdf, 0xd1, 0xaf, 0xf2
-+};
-+static const u8 enc_output047[] __initconst = {
-+	0xc8, 0x4c, 0x9b, 0xb7, 0xc6, 0x1c, 0x1b, 0xcb,
-+	0x17, 0x77, 0x2a, 0x1c, 0x50, 0x0c, 0x50, 0x95,
-+	0xdb, 0xad, 0xf7, 0xa5, 0x13, 0x8c, 0xa0, 0x34,
-+	0x59, 0xa2, 0xcd, 0x65, 0x83, 0x1e, 0x09, 0x2f
-+};
-+static const u8 enc_assoc047[] __initconst = {
-+	0x89, 0xcc, 0xe9, 0xfb, 0x47, 0x44, 0x1d, 0x07,
-+	0xe0, 0x24, 0x5a, 0x66, 0xfe, 0x8b, 0x77, 0x8b
-+};
-+static const u8 enc_nonce047[] __initconst = {
-+	0x1a, 0x65, 0x18, 0xf0, 0x2e, 0xde, 0x1d, 0xa6,
-+	0x80, 0x92, 0x66, 0xd9
-+};
-+static const u8 enc_key047[] __initconst = {
-+	0xcb, 0x55, 0x75, 0xf5, 0xc7, 0xc4, 0x5c, 0x91,
-+	0xcf, 0x32, 0x0b, 0x13, 0x9f, 0xb5, 0x94, 0x23,
-+	0x75, 0x60, 0xd0, 0xa3, 0xe6, 0xf8, 0x65, 0xa6,
-+	0x7d, 0x4f, 0x63, 0x3f, 0x2c, 0x08, 0xf0, 0x16
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input048[] __initconst = {
-+	0x87, 0xb3, 0xa4, 0xd7, 0xb2, 0x6d, 0x8d, 0x32,
-+	0x03, 0xa0, 0xde, 0x1d, 0x64, 0xef, 0x82, 0xe3
-+};
-+static const u8 enc_output048[] __initconst = {
-+	0x94, 0xbc, 0x80, 0x62, 0x1e, 0xd1, 0xe7, 0x1b,
-+	0x1f, 0xd2, 0xb5, 0xc3, 0xa1, 0x5e, 0x35, 0x68,
-+	0x33, 0x35, 0x11, 0x86, 0x17, 0x96, 0x97, 0x84,
-+	0x01, 0x59, 0x8b, 0x96, 0x37, 0x22, 0xf5, 0xb3
-+};
-+static const u8 enc_assoc048[] __initconst = {
-+	0xd1, 0x9f, 0x2d, 0x98, 0x90, 0x95, 0xf7, 0xab,
-+	0x03, 0xa5, 0xfd, 0xe8, 0x44, 0x16, 0xe0, 0x0c,
-+	0x0e
-+};
-+static const u8 enc_nonce048[] __initconst = {
-+	0x56, 0x4d, 0xee, 0x49, 0xab, 0x00, 0xd2, 0x40,
-+	0xfc, 0x10, 0x68, 0xc3
-+};
-+static const u8 enc_key048[] __initconst = {
-+	0xa5, 0x56, 0x9e, 0x72, 0x9a, 0x69, 0xb2, 0x4b,
-+	0xa6, 0xe0, 0xff, 0x15, 0xc4, 0x62, 0x78, 0x97,
-+	0x43, 0x68, 0x24, 0xc9, 0x41, 0xe9, 0xd0, 0x0b,
-+	0x2e, 0x93, 0xfd, 0xdc, 0x4b, 0xa7, 0x76, 0x57
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input049[] __initconst = {
-+	0xe6, 0x01, 0xb3, 0x85, 0x57, 0x79, 0x7d, 0xa2,
-+	0xf8, 0xa4, 0x10, 0x6a, 0x08, 0x9d, 0x1d, 0xa6
-+};
-+static const u8 enc_output049[] __initconst = {
-+	0x29, 0x9b, 0x5d, 0x3f, 0x3d, 0x03, 0xc0, 0x87,
-+	0x20, 0x9a, 0x16, 0xe2, 0x85, 0x14, 0x31, 0x11,
-+	0x4b, 0x45, 0x4e, 0xd1, 0x98, 0xde, 0x11, 0x7e,
-+	0x83, 0xec, 0x49, 0xfa, 0x8d, 0x85, 0x08, 0xd6
-+};
-+static const u8 enc_assoc049[] __initconst = {
-+	0x5e, 0x64, 0x70, 0xfa, 0xcd, 0x99, 0xc1, 0xd8,
-+	0x1e, 0x37, 0xcd, 0x44, 0x01, 0x5f, 0xe1, 0x94,
-+	0x80, 0xa2, 0xa4, 0xd3, 0x35, 0x2a, 0x4f, 0xf5,
-+	0x60, 0xc0, 0x64, 0x0f, 0xdb, 0xda
-+};
-+static const u8 enc_nonce049[] __initconst = {
-+	0xdf, 0x87, 0x13, 0xe8, 0x7e, 0xc3, 0xdb, 0xcf,
-+	0xad, 0x14, 0xd5, 0x3e
-+};
-+static const u8 enc_key049[] __initconst = {
-+	0x56, 0x20, 0x74, 0x65, 0xb4, 0xe4, 0x8e, 0x6d,
-+	0x04, 0x63, 0x0f, 0x4a, 0x42, 0xf3, 0x5c, 0xfc,
-+	0x16, 0x3a, 0xb2, 0x89, 0xc2, 0x2a, 0x2b, 0x47,
-+	0x84, 0xf6, 0xf9, 0x29, 0x03, 0x30, 0xbe, 0xe0
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input050[] __initconst = {
-+	0xdc, 0x9e, 0x9e, 0xaf, 0x11, 0xe3, 0x14, 0x18,
-+	0x2d, 0xf6, 0xa4, 0xeb, 0xa1, 0x7a, 0xec, 0x9c
-+};
-+static const u8 enc_output050[] __initconst = {
-+	0x60, 0x5b, 0xbf, 0x90, 0xae, 0xb9, 0x74, 0xf6,
-+	0x60, 0x2b, 0xc7, 0x78, 0x05, 0x6f, 0x0d, 0xca,
-+	0x38, 0xea, 0x23, 0xd9, 0x90, 0x54, 0xb4, 0x6b,
-+	0x42, 0xff, 0xe0, 0x04, 0x12, 0x9d, 0x22, 0x04
-+};
-+static const u8 enc_assoc050[] __initconst = {
-+	0xba, 0x44, 0x6f, 0x6f, 0x9a, 0x0c, 0xed, 0x22,
-+	0x45, 0x0f, 0xeb, 0x10, 0x73, 0x7d, 0x90, 0x07,
-+	0xfd, 0x69, 0xab, 0xc1, 0x9b, 0x1d, 0x4d, 0x90,
-+	0x49, 0xa5, 0x55, 0x1e, 0x86, 0xec, 0x2b, 0x37
-+};
-+static const u8 enc_nonce050[] __initconst = {
-+	0x8d, 0xf4, 0xb1, 0x5a, 0x88, 0x8c, 0x33, 0x28,
-+	0x6a, 0x7b, 0x76, 0x51
-+};
-+static const u8 enc_key050[] __initconst = {
-+	0x39, 0x37, 0x98, 0x6a, 0xf8, 0x6d, 0xaf, 0xc1,
-+	0xba, 0x0c, 0x46, 0x72, 0xd8, 0xab, 0xc4, 0x6c,
-+	0x20, 0x70, 0x62, 0x68, 0x2d, 0x9c, 0x26, 0x4a,
-+	0xb0, 0x6d, 0x6c, 0x58, 0x07, 0x20, 0x51, 0x30
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input051[] __initconst = {
-+	0x81, 0xce, 0x84, 0xed, 0xe9, 0xb3, 0x58, 0x59,
-+	0xcc, 0x8c, 0x49, 0xa8, 0xf6, 0xbe, 0x7d, 0xc6
-+};
-+static const u8 enc_output051[] __initconst = {
-+	0x7b, 0x7c, 0xe0, 0xd8, 0x24, 0x80, 0x9a, 0x70,
-+	0xde, 0x32, 0x56, 0x2c, 0xcf, 0x2c, 0x2b, 0xbd,
-+	0x15, 0xd4, 0x4a, 0x00, 0xce, 0x0d, 0x19, 0xb4,
-+	0x23, 0x1f, 0x92, 0x1e, 0x22, 0xbc, 0x0a, 0x43
-+};
-+static const u8 enc_assoc051[] __initconst = {
-+	0xd4, 0x1a, 0x82, 0x8d, 0x5e, 0x71, 0x82, 0x92,
-+	0x47, 0x02, 0x19, 0x05, 0x40, 0x2e, 0xa2, 0x57,
-+	0xdc, 0xcb, 0xc3, 0xb8, 0x0f, 0xcd, 0x56, 0x75,
-+	0x05, 0x6b, 0x68, 0xbb, 0x59, 0xe6, 0x2e, 0x88,
-+	0x73
-+};
-+static const u8 enc_nonce051[] __initconst = {
-+	0xbe, 0x40, 0xe5, 0xf1, 0xa1, 0x18, 0x17, 0xa0,
-+	0xa8, 0xfa, 0x89, 0x49
-+};
-+static const u8 enc_key051[] __initconst = {
-+	0x36, 0x37, 0x2a, 0xbc, 0xdb, 0x78, 0xe0, 0x27,
-+	0x96, 0x46, 0xac, 0x3d, 0x17, 0x6b, 0x96, 0x74,
-+	0xe9, 0x15, 0x4e, 0xec, 0xf0, 0xd5, 0x46, 0x9c,
-+	0x65, 0x1e, 0xc7, 0xe1, 0x6b, 0x4c, 0x11, 0x99
-+};
-+
-+/* wycheproof - misc */
-+static const u8 enc_input052[] __initconst = {
-+	0xa6, 0x67, 0x47, 0xc8, 0x9e, 0x85, 0x7a, 0xf3,
-+	0xa1, 0x8e, 0x2c, 0x79, 0x50, 0x00, 0x87, 0xed
-+};
-+static const u8 enc_output052[] __initconst = {
-+	0xca, 0x82, 0xbf, 0xf3, 0xe2, 0xf3, 0x10, 0xcc,
-+	0xc9, 0x76, 0x67, 0x2c, 0x44, 0x15, 0xe6, 0x9b,
-+	0x57, 0x63, 0x8c, 0x62, 0xa5, 0xd8, 0x5d, 0xed,
-+	0x77, 0x4f, 0x91, 0x3c, 0x81, 0x3e, 0xa0, 0x32
-+};
-+static const u8 enc_assoc052[] __initconst = {
-+	0x3f, 0x2d, 0xd4, 0x9b, 0xbf, 0x09, 0xd6, 0x9a,
-+	0x78, 0xa3, 0xd8, 0x0e, 0xa2, 0x56, 0x66, 0x14,
-+	0xfc, 0x37, 0x94, 0x74, 0x19, 0x6c, 0x1a, 0xae,
-+	0x84, 0x58, 0x3d, 0xa7, 0x3d, 0x7f, 0xf8, 0x5c,
-+	0x6f, 0x42, 0xca, 0x42, 0x05, 0x6a, 0x97, 0x92,
-+	0xcc, 0x1b, 0x9f, 0xb3, 0xc7, 0xd2, 0x61
-+};
-+static const u8 enc_nonce052[] __initconst = {
-+	0x84, 0xc8, 0x7d, 0xae, 0x4e, 0xee, 0x27, 0x73,
-+	0x0e, 0xc3, 0x5d, 0x12
-+};
-+static const u8 enc_key052[] __initconst = {
-+	0x9f, 0x14, 0x79, 0xed, 0x09, 0x7d, 0x7f, 0xe5,
-+	0x29, 0xc1, 0x1f, 0x2f, 0x5a, 0xdd, 0x9a, 0xaf,
-+	0xf4, 0xa1, 0xca, 0x0b, 0x68, 0x99, 0x7a, 0x2c,
-+	0xb7, 0xf7, 0x97, 0x49, 0xbd, 0x90, 0xaa, 0xf4
-+};
-+
- /* wycheproof - misc */
- static const u8 enc_input053[] __initconst = {
- 	0x25, 0x6d, 0x40, 0x88, 0x80, 0x94, 0x17, 0x83,
-@@ -2760,6 +3859,126 @@ static const u8 enc_key073[] __initconst
- };
- 
- /* wycheproof - checking for int overflows */
-+static const u8 enc_input074[] __initconst = {
-+	0xd4, 0x50, 0x0b, 0xf0, 0x09, 0x49, 0x35, 0x51,
-+	0xc3, 0x80, 0xad, 0xf5, 0x2c, 0x57, 0x3a, 0x69,
-+	0xdf, 0x7e, 0x8b, 0x76, 0x24, 0x63, 0x33, 0x0f,
-+	0xac, 0xc1, 0x6a, 0x57, 0x26, 0xbe, 0x71, 0x90,
-+	0xc6, 0x3c, 0x5a, 0x1c, 0x92, 0x65, 0x84, 0xa0,
-+	0x96, 0x75, 0x68, 0x28, 0xdc, 0xdc, 0x64, 0xac,
-+	0xdf, 0x96, 0x3d, 0x93, 0x1b, 0xf1, 0xda, 0xe2,
-+	0x38, 0xf3, 0xf1, 0x57, 0x22, 0x4a, 0xc4, 0xb5,
-+	0x42, 0xd7, 0x85, 0xb0, 0xdd, 0x84, 0xdb, 0x6b,
-+	0xe3, 0xbc, 0x5a, 0x36, 0x63, 0xe8, 0x41, 0x49,
-+	0xff, 0xbe, 0xd0, 0x9e, 0x54, 0xf7, 0x8f, 0x16,
-+	0xa8, 0x22, 0x3b, 0x24, 0xcb, 0x01, 0x9f, 0x58,
-+	0xb2, 0x1b, 0x0e, 0x55, 0x1e, 0x7a, 0xa0, 0x73,
-+	0x27, 0x62, 0x95, 0x51, 0x37, 0x6c, 0xcb, 0xc3,
-+	0x93, 0x76, 0x71, 0xa0, 0x62, 0x9b, 0xd9, 0x5c,
-+	0x99, 0x15, 0xc7, 0x85, 0x55, 0x77, 0x1e, 0x7a
-+};
-+static const u8 enc_output074[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x0b, 0x30, 0x0d, 0x8d, 0xa5, 0x6c, 0x21, 0x85,
-+	0x75, 0x52, 0x79, 0x55, 0x3c, 0x4c, 0x82, 0xca
-+};
-+static const u8 enc_assoc074[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce074[] __initconst = {
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x00, 0x02, 0x50, 0x6e
-+};
-+static const u8 enc_key074[] __initconst = {
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30
-+};
-+
-+/* wycheproof - checking for int overflows */
-+static const u8 enc_input075[] __initconst = {
-+	0x7d, 0xe8, 0x7f, 0x67, 0x29, 0x94, 0x52, 0x75,
-+	0xd0, 0x65, 0x5d, 0xa4, 0xc7, 0xfd, 0xe4, 0x56,
-+	0x9e, 0x16, 0xf1, 0x11, 0xb5, 0xeb, 0x26, 0xc2,
-+	0x2d, 0x85, 0x9e, 0x3f, 0xf8, 0x22, 0xec, 0xed,
-+	0x3a, 0x6d, 0xd9, 0xa6, 0x0f, 0x22, 0x95, 0x7f,
-+	0x7b, 0x7c, 0x85, 0x7e, 0x88, 0x22, 0xeb, 0x9f,
-+	0xe0, 0xb8, 0xd7, 0x02, 0x21, 0x41, 0xf2, 0xd0,
-+	0xb4, 0x8f, 0x4b, 0x56, 0x12, 0xd3, 0x22, 0xa8,
-+	0x8d, 0xd0, 0xfe, 0x0b, 0x4d, 0x91, 0x79, 0x32,
-+	0x4f, 0x7c, 0x6c, 0x9e, 0x99, 0x0e, 0xfb, 0xd8,
-+	0x0e, 0x5e, 0xd6, 0x77, 0x58, 0x26, 0x49, 0x8b,
-+	0x1e, 0xfe, 0x0f, 0x71, 0xa0, 0xf3, 0xec, 0x5b,
-+	0x29, 0xcb, 0x28, 0xc2, 0x54, 0x0a, 0x7d, 0xcd,
-+	0x51, 0xb7, 0xda, 0xae, 0xe0, 0xff, 0x4a, 0x7f,
-+	0x3a, 0xc1, 0xee, 0x54, 0xc2, 0x9e, 0xe4, 0xc1,
-+	0x70, 0xde, 0x40, 0x8f, 0x66, 0x69, 0x21, 0x94
-+};
-+static const u8 enc_output075[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xc5, 0x78, 0xe2, 0xaa, 0x44, 0xd3, 0x09, 0xb7,
-+	0xb6, 0xa5, 0x19, 0x3b, 0xdc, 0x61, 0x18, 0xf5
-+};
-+static const u8 enc_assoc075[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_nonce075[] __initconst = {
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x00, 0x03, 0x18, 0xa5
-+};
-+static const u8 enc_key075[] __initconst = {
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
-+	0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30
-+};
-+
-+/* wycheproof - checking for int overflows */
- static const u8 enc_input076[] __initconst = {
- 	0x1b, 0x99, 0x6f, 0x9a, 0x3c, 0xcc, 0x67, 0x85,
- 	0xde, 0x22, 0xff, 0x5b, 0x8a, 0xdd, 0x95, 0x02,
-@@ -3349,6 +4568,286 @@ static const u8 enc_key085[] __initconst
- 	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
- };
- 
-+/* wycheproof - special case tag */
-+static const u8 enc_input086[] __initconst = {
-+	0x9a, 0x49, 0xc4, 0x0f, 0x8b, 0x48, 0xd7, 0xc6,
-+	0x6d, 0x1d, 0xb4, 0xe5, 0x3f, 0x20, 0xf2, 0xdd,
-+	0x4a, 0xaa, 0x24, 0x1d, 0xda, 0xb2, 0x6b, 0x5b,
-+	0xc0, 0xe2, 0x18, 0xb7, 0x2c, 0x33, 0x90, 0xf2,
-+	0xdf, 0x3e, 0xbd, 0x01, 0x76, 0x70, 0x44, 0x19,
-+	0x97, 0x2b, 0xcd, 0xbc, 0x6b, 0xbc, 0xb3, 0xe4,
-+	0xe7, 0x4a, 0x71, 0x52, 0x8e, 0xf5, 0x12, 0x63,
-+	0xce, 0x24, 0xe0, 0xd5, 0x75, 0xe0, 0xe4, 0x4d
-+};
-+static const u8 enc_output086[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+	0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
-+};
-+static const u8 enc_assoc086[] __initconst = {
-+	0x85, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xa6, 0x90, 0x2f, 0xcb, 0xc8, 0x83, 0xbb, 0xc1,
-+	0x80, 0xb2, 0x56, 0xae, 0x34, 0xad, 0x7f, 0x00
-+};
-+static const u8 enc_nonce086[] __initconst = {
-+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+	0x08, 0x09, 0x0a, 0x0b
-+};
-+static const u8 enc_key086[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - special case tag */
-+static const u8 enc_input087[] __initconst = {
-+	0x9a, 0x49, 0xc4, 0x0f, 0x8b, 0x48, 0xd7, 0xc6,
-+	0x6d, 0x1d, 0xb4, 0xe5, 0x3f, 0x20, 0xf2, 0xdd,
-+	0x4a, 0xaa, 0x24, 0x1d, 0xda, 0xb2, 0x6b, 0x5b,
-+	0xc0, 0xe2, 0x18, 0xb7, 0x2c, 0x33, 0x90, 0xf2,
-+	0xdf, 0x3e, 0xbd, 0x01, 0x76, 0x70, 0x44, 0x19,
-+	0x97, 0x2b, 0xcd, 0xbc, 0x6b, 0xbc, 0xb3, 0xe4,
-+	0xe7, 0x4a, 0x71, 0x52, 0x8e, 0xf5, 0x12, 0x63,
-+	0xce, 0x24, 0xe0, 0xd5, 0x75, 0xe0, 0xe4, 0x4d
-+};
-+static const u8 enc_output087[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-+};
-+static const u8 enc_assoc087[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x24, 0x7e, 0x50, 0x64, 0x2a, 0x1c, 0x0a, 0x2f,
-+	0x8f, 0x77, 0x21, 0x96, 0x09, 0xdb, 0xa9, 0x58
-+};
-+static const u8 enc_nonce087[] __initconst = {
-+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+	0x08, 0x09, 0x0a, 0x0b
-+};
-+static const u8 enc_key087[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - special case tag */
-+static const u8 enc_input088[] __initconst = {
-+	0x9a, 0x49, 0xc4, 0x0f, 0x8b, 0x48, 0xd7, 0xc6,
-+	0x6d, 0x1d, 0xb4, 0xe5, 0x3f, 0x20, 0xf2, 0xdd,
-+	0x4a, 0xaa, 0x24, 0x1d, 0xda, 0xb2, 0x6b, 0x5b,
-+	0xc0, 0xe2, 0x18, 0xb7, 0x2c, 0x33, 0x90, 0xf2,
-+	0xdf, 0x3e, 0xbd, 0x01, 0x76, 0x70, 0x44, 0x19,
-+	0x97, 0x2b, 0xcd, 0xbc, 0x6b, 0xbc, 0xb3, 0xe4,
-+	0xe7, 0x4a, 0x71, 0x52, 0x8e, 0xf5, 0x12, 0x63,
-+	0xce, 0x24, 0xe0, 0xd5, 0x75, 0xe0, 0xe4, 0x4d
-+};
-+static const u8 enc_output088[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+static const u8 enc_assoc088[] __initconst = {
-+	0x7c, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xd9, 0xe7, 0x2c, 0x06, 0x4a, 0xc8, 0x96, 0x1f,
-+	0x3f, 0xa5, 0x85, 0xe0, 0xe2, 0xab, 0xd6, 0x00
-+};
-+static const u8 enc_nonce088[] __initconst = {
-+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+	0x08, 0x09, 0x0a, 0x0b
-+};
-+static const u8 enc_key088[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - special case tag */
-+static const u8 enc_input089[] __initconst = {
-+	0x9a, 0x49, 0xc4, 0x0f, 0x8b, 0x48, 0xd7, 0xc6,
-+	0x6d, 0x1d, 0xb4, 0xe5, 0x3f, 0x20, 0xf2, 0xdd,
-+	0x4a, 0xaa, 0x24, 0x1d, 0xda, 0xb2, 0x6b, 0x5b,
-+	0xc0, 0xe2, 0x18, 0xb7, 0x2c, 0x33, 0x90, 0xf2,
-+	0xdf, 0x3e, 0xbd, 0x01, 0x76, 0x70, 0x44, 0x19,
-+	0x97, 0x2b, 0xcd, 0xbc, 0x6b, 0xbc, 0xb3, 0xe4,
-+	0xe7, 0x4a, 0x71, 0x52, 0x8e, 0xf5, 0x12, 0x63,
-+	0xce, 0x24, 0xe0, 0xd5, 0x75, 0xe0, 0xe4, 0x4d
-+};
-+static const u8 enc_output089[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80,
-+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80
-+};
-+static const u8 enc_assoc089[] __initconst = {
-+	0x65, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x95, 0xaf, 0x0f, 0x4d, 0x0b, 0x68, 0x6e, 0xae,
-+	0xcc, 0xca, 0x43, 0x07, 0xd5, 0x96, 0xf5, 0x02
-+};
-+static const u8 enc_nonce089[] __initconst = {
-+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+	0x08, 0x09, 0x0a, 0x0b
-+};
-+static const u8 enc_key089[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - special case tag */
-+static const u8 enc_input090[] __initconst = {
-+	0x9a, 0x49, 0xc4, 0x0f, 0x8b, 0x48, 0xd7, 0xc6,
-+	0x6d, 0x1d, 0xb4, 0xe5, 0x3f, 0x20, 0xf2, 0xdd,
-+	0x4a, 0xaa, 0x24, 0x1d, 0xda, 0xb2, 0x6b, 0x5b,
-+	0xc0, 0xe2, 0x18, 0xb7, 0x2c, 0x33, 0x90, 0xf2,
-+	0xdf, 0x3e, 0xbd, 0x01, 0x76, 0x70, 0x44, 0x19,
-+	0x97, 0x2b, 0xcd, 0xbc, 0x6b, 0xbc, 0xb3, 0xe4,
-+	0xe7, 0x4a, 0x71, 0x52, 0x8e, 0xf5, 0x12, 0x63,
-+	0xce, 0x24, 0xe0, 0xd5, 0x75, 0xe0, 0xe4, 0x4d
-+};
-+static const u8 enc_output090[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f,
-+	0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f
-+};
-+static const u8 enc_assoc090[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x85, 0x40, 0xb4, 0x64, 0x35, 0x77, 0x07, 0xbe,
-+	0x3a, 0x39, 0xd5, 0x5c, 0x34, 0xf8, 0xbc, 0xb3
-+};
-+static const u8 enc_nonce090[] __initconst = {
-+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+	0x08, 0x09, 0x0a, 0x0b
-+};
-+static const u8 enc_key090[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - special case tag */
-+static const u8 enc_input091[] __initconst = {
-+	0x9a, 0x49, 0xc4, 0x0f, 0x8b, 0x48, 0xd7, 0xc6,
-+	0x6d, 0x1d, 0xb4, 0xe5, 0x3f, 0x20, 0xf2, 0xdd,
-+	0x4a, 0xaa, 0x24, 0x1d, 0xda, 0xb2, 0x6b, 0x5b,
-+	0xc0, 0xe2, 0x18, 0xb7, 0x2c, 0x33, 0x90, 0xf2,
-+	0xdf, 0x3e, 0xbd, 0x01, 0x76, 0x70, 0x44, 0x19,
-+	0x97, 0x2b, 0xcd, 0xbc, 0x6b, 0xbc, 0xb3, 0xe4,
-+	0xe7, 0x4a, 0x71, 0x52, 0x8e, 0xf5, 0x12, 0x63,
-+	0xce, 0x24, 0xe0, 0xd5, 0x75, 0xe0, 0xe4, 0x4d
-+};
-+static const u8 enc_output091[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
-+	0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00
-+};
-+static const u8 enc_assoc091[] __initconst = {
-+	0x4f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x66, 0x23, 0xd9, 0x90, 0xb8, 0x98, 0xd8, 0x30,
-+	0xd2, 0x12, 0xaf, 0x23, 0x83, 0x33, 0x07, 0x01
-+};
-+static const u8 enc_nonce091[] __initconst = {
-+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+	0x08, 0x09, 0x0a, 0x0b
-+};
-+static const u8 enc_key091[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
-+/* wycheproof - special case tag */
-+static const u8 enc_input092[] __initconst = {
-+	0x9a, 0x49, 0xc4, 0x0f, 0x8b, 0x48, 0xd7, 0xc6,
-+	0x6d, 0x1d, 0xb4, 0xe5, 0x3f, 0x20, 0xf2, 0xdd,
-+	0x4a, 0xaa, 0x24, 0x1d, 0xda, 0xb2, 0x6b, 0x5b,
-+	0xc0, 0xe2, 0x18, 0xb7, 0x2c, 0x33, 0x90, 0xf2,
-+	0xdf, 0x3e, 0xbd, 0x01, 0x76, 0x70, 0x44, 0x19,
-+	0x97, 0x2b, 0xcd, 0xbc, 0x6b, 0xbc, 0xb3, 0xe4,
-+	0xe7, 0x4a, 0x71, 0x52, 0x8e, 0xf5, 0x12, 0x63,
-+	0xce, 0x24, 0xe0, 0xd5, 0x75, 0xe0, 0xe4, 0x4d
-+};
-+static const u8 enc_output092[] __initconst = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-+};
-+static const u8 enc_assoc092[] __initconst = {
-+	0x83, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0x5f, 0x16, 0xd0, 0x9f, 0x17, 0x78, 0x72, 0x11,
-+	0xb7, 0xd4, 0x84, 0xe0, 0x24, 0xf8, 0x97, 0x01
-+};
-+static const u8 enc_nonce092[] __initconst = {
-+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+	0x08, 0x09, 0x0a, 0x0b
-+};
-+static const u8 enc_key092[] __initconst = {
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f
-+};
-+
- /* wycheproof - edge case intermediate sums in poly1305 */
- static const u8 enc_input093[] __initconst = {
- 	0x00, 0x52, 0x35, 0xd2, 0xa9, 0x19, 0xf2, 0x8d,
-@@ -4455,6 +5954,86 @@ chacha20poly1305_enc_vectors[] __initcon
- 	  sizeof(enc_input011), sizeof(enc_assoc011), sizeof(enc_nonce011) },
- 	{ enc_input012, enc_output012, enc_assoc012, enc_nonce012, enc_key012,
- 	  sizeof(enc_input012), sizeof(enc_assoc012), sizeof(enc_nonce012) },
-+	{ enc_input013, enc_output013, enc_assoc013, enc_nonce013, enc_key013,
-+	  sizeof(enc_input013), sizeof(enc_assoc013), sizeof(enc_nonce013) },
-+	{ enc_input014, enc_output014, enc_assoc014, enc_nonce014, enc_key014,
-+	  sizeof(enc_input014), sizeof(enc_assoc014), sizeof(enc_nonce014) },
-+	{ enc_input015, enc_output015, enc_assoc015, enc_nonce015, enc_key015,
-+	  sizeof(enc_input015), sizeof(enc_assoc015), sizeof(enc_nonce015) },
-+	{ enc_input016, enc_output016, enc_assoc016, enc_nonce016, enc_key016,
-+	  sizeof(enc_input016), sizeof(enc_assoc016), sizeof(enc_nonce016) },
-+	{ enc_input017, enc_output017, enc_assoc017, enc_nonce017, enc_key017,
-+	  sizeof(enc_input017), sizeof(enc_assoc017), sizeof(enc_nonce017) },
-+	{ enc_input018, enc_output018, enc_assoc018, enc_nonce018, enc_key018,
-+	  sizeof(enc_input018), sizeof(enc_assoc018), sizeof(enc_nonce018) },
-+	{ enc_input019, enc_output019, enc_assoc019, enc_nonce019, enc_key019,
-+	  sizeof(enc_input019), sizeof(enc_assoc019), sizeof(enc_nonce019) },
-+	{ enc_input020, enc_output020, enc_assoc020, enc_nonce020, enc_key020,
-+	  sizeof(enc_input020), sizeof(enc_assoc020), sizeof(enc_nonce020) },
-+	{ enc_input021, enc_output021, enc_assoc021, enc_nonce021, enc_key021,
-+	  sizeof(enc_input021), sizeof(enc_assoc021), sizeof(enc_nonce021) },
-+	{ enc_input022, enc_output022, enc_assoc022, enc_nonce022, enc_key022,
-+	  sizeof(enc_input022), sizeof(enc_assoc022), sizeof(enc_nonce022) },
-+	{ enc_input023, enc_output023, enc_assoc023, enc_nonce023, enc_key023,
-+	  sizeof(enc_input023), sizeof(enc_assoc023), sizeof(enc_nonce023) },
-+	{ enc_input024, enc_output024, enc_assoc024, enc_nonce024, enc_key024,
-+	  sizeof(enc_input024), sizeof(enc_assoc024), sizeof(enc_nonce024) },
-+	{ enc_input025, enc_output025, enc_assoc025, enc_nonce025, enc_key025,
-+	  sizeof(enc_input025), sizeof(enc_assoc025), sizeof(enc_nonce025) },
-+	{ enc_input026, enc_output026, enc_assoc026, enc_nonce026, enc_key026,
-+	  sizeof(enc_input026), sizeof(enc_assoc026), sizeof(enc_nonce026) },
-+	{ enc_input027, enc_output027, enc_assoc027, enc_nonce027, enc_key027,
-+	  sizeof(enc_input027), sizeof(enc_assoc027), sizeof(enc_nonce027) },
-+	{ enc_input028, enc_output028, enc_assoc028, enc_nonce028, enc_key028,
-+	  sizeof(enc_input028), sizeof(enc_assoc028), sizeof(enc_nonce028) },
-+	{ enc_input029, enc_output029, enc_assoc029, enc_nonce029, enc_key029,
-+	  sizeof(enc_input029), sizeof(enc_assoc029), sizeof(enc_nonce029) },
-+	{ enc_input030, enc_output030, enc_assoc030, enc_nonce030, enc_key030,
-+	  sizeof(enc_input030), sizeof(enc_assoc030), sizeof(enc_nonce030) },
-+	{ enc_input031, enc_output031, enc_assoc031, enc_nonce031, enc_key031,
-+	  sizeof(enc_input031), sizeof(enc_assoc031), sizeof(enc_nonce031) },
-+	{ enc_input032, enc_output032, enc_assoc032, enc_nonce032, enc_key032,
-+	  sizeof(enc_input032), sizeof(enc_assoc032), sizeof(enc_nonce032) },
-+	{ enc_input033, enc_output033, enc_assoc033, enc_nonce033, enc_key033,
-+	  sizeof(enc_input033), sizeof(enc_assoc033), sizeof(enc_nonce033) },
-+	{ enc_input034, enc_output034, enc_assoc034, enc_nonce034, enc_key034,
-+	  sizeof(enc_input034), sizeof(enc_assoc034), sizeof(enc_nonce034) },
-+	{ enc_input035, enc_output035, enc_assoc035, enc_nonce035, enc_key035,
-+	  sizeof(enc_input035), sizeof(enc_assoc035), sizeof(enc_nonce035) },
-+	{ enc_input036, enc_output036, enc_assoc036, enc_nonce036, enc_key036,
-+	  sizeof(enc_input036), sizeof(enc_assoc036), sizeof(enc_nonce036) },
-+	{ enc_input037, enc_output037, enc_assoc037, enc_nonce037, enc_key037,
-+	  sizeof(enc_input037), sizeof(enc_assoc037), sizeof(enc_nonce037) },
-+	{ enc_input038, enc_output038, enc_assoc038, enc_nonce038, enc_key038,
-+	  sizeof(enc_input038), sizeof(enc_assoc038), sizeof(enc_nonce038) },
-+	{ enc_input039, enc_output039, enc_assoc039, enc_nonce039, enc_key039,
-+	  sizeof(enc_input039), sizeof(enc_assoc039), sizeof(enc_nonce039) },
-+	{ enc_input040, enc_output040, enc_assoc040, enc_nonce040, enc_key040,
-+	  sizeof(enc_input040), sizeof(enc_assoc040), sizeof(enc_nonce040) },
-+	{ enc_input041, enc_output041, enc_assoc041, enc_nonce041, enc_key041,
-+	  sizeof(enc_input041), sizeof(enc_assoc041), sizeof(enc_nonce041) },
-+	{ enc_input042, enc_output042, enc_assoc042, enc_nonce042, enc_key042,
-+	  sizeof(enc_input042), sizeof(enc_assoc042), sizeof(enc_nonce042) },
-+	{ enc_input043, enc_output043, enc_assoc043, enc_nonce043, enc_key043,
-+	  sizeof(enc_input043), sizeof(enc_assoc043), sizeof(enc_nonce043) },
-+	{ enc_input044, enc_output044, enc_assoc044, enc_nonce044, enc_key044,
-+	  sizeof(enc_input044), sizeof(enc_assoc044), sizeof(enc_nonce044) },
-+	{ enc_input045, enc_output045, enc_assoc045, enc_nonce045, enc_key045,
-+	  sizeof(enc_input045), sizeof(enc_assoc045), sizeof(enc_nonce045) },
-+	{ enc_input046, enc_output046, enc_assoc046, enc_nonce046, enc_key046,
-+	  sizeof(enc_input046), sizeof(enc_assoc046), sizeof(enc_nonce046) },
-+	{ enc_input047, enc_output047, enc_assoc047, enc_nonce047, enc_key047,
-+	  sizeof(enc_input047), sizeof(enc_assoc047), sizeof(enc_nonce047) },
-+	{ enc_input048, enc_output048, enc_assoc048, enc_nonce048, enc_key048,
-+	  sizeof(enc_input048), sizeof(enc_assoc048), sizeof(enc_nonce048) },
-+	{ enc_input049, enc_output049, enc_assoc049, enc_nonce049, enc_key049,
-+	  sizeof(enc_input049), sizeof(enc_assoc049), sizeof(enc_nonce049) },
-+	{ enc_input050, enc_output050, enc_assoc050, enc_nonce050, enc_key050,
-+	  sizeof(enc_input050), sizeof(enc_assoc050), sizeof(enc_nonce050) },
-+	{ enc_input051, enc_output051, enc_assoc051, enc_nonce051, enc_key051,
-+	  sizeof(enc_input051), sizeof(enc_assoc051), sizeof(enc_nonce051) },
-+	{ enc_input052, enc_output052, enc_assoc052, enc_nonce052, enc_key052,
-+	  sizeof(enc_input052), sizeof(enc_assoc052), sizeof(enc_nonce052) },
- 	{ enc_input053, enc_output053, enc_assoc053, enc_nonce053, enc_key053,
- 	  sizeof(enc_input053), sizeof(enc_assoc053), sizeof(enc_nonce053) },
- 	{ enc_input054, enc_output054, enc_assoc054, enc_nonce054, enc_key054,
-@@ -4497,6 +6076,10 @@ chacha20poly1305_enc_vectors[] __initcon
- 	  sizeof(enc_input072), sizeof(enc_assoc072), sizeof(enc_nonce072) },
- 	{ enc_input073, enc_output073, enc_assoc073, enc_nonce073, enc_key073,
- 	  sizeof(enc_input073), sizeof(enc_assoc073), sizeof(enc_nonce073) },
-+	{ enc_input074, enc_output074, enc_assoc074, enc_nonce074, enc_key074,
-+	  sizeof(enc_input074), sizeof(enc_assoc074), sizeof(enc_nonce074) },
-+	{ enc_input075, enc_output075, enc_assoc075, enc_nonce075, enc_key075,
-+	  sizeof(enc_input075), sizeof(enc_assoc075), sizeof(enc_nonce075) },
- 	{ enc_input076, enc_output076, enc_assoc076, enc_nonce076, enc_key076,
- 	  sizeof(enc_input076), sizeof(enc_assoc076), sizeof(enc_nonce076) },
- 	{ enc_input077, enc_output077, enc_assoc077, enc_nonce077, enc_key077,
-@@ -4517,6 +6100,20 @@ chacha20poly1305_enc_vectors[] __initcon
- 	  sizeof(enc_input084), sizeof(enc_assoc084), sizeof(enc_nonce084) },
- 	{ enc_input085, enc_output085, enc_assoc085, enc_nonce085, enc_key085,
- 	  sizeof(enc_input085), sizeof(enc_assoc085), sizeof(enc_nonce085) },
-+	{ enc_input086, enc_output086, enc_assoc086, enc_nonce086, enc_key086,
-+	  sizeof(enc_input086), sizeof(enc_assoc086), sizeof(enc_nonce086) },
-+	{ enc_input087, enc_output087, enc_assoc087, enc_nonce087, enc_key087,
-+	  sizeof(enc_input087), sizeof(enc_assoc087), sizeof(enc_nonce087) },
-+	{ enc_input088, enc_output088, enc_assoc088, enc_nonce088, enc_key088,
-+	  sizeof(enc_input088), sizeof(enc_assoc088), sizeof(enc_nonce088) },
-+	{ enc_input089, enc_output089, enc_assoc089, enc_nonce089, enc_key089,
-+	  sizeof(enc_input089), sizeof(enc_assoc089), sizeof(enc_nonce089) },
-+	{ enc_input090, enc_output090, enc_assoc090, enc_nonce090, enc_key090,
-+	  sizeof(enc_input090), sizeof(enc_assoc090), sizeof(enc_nonce090) },
-+	{ enc_input091, enc_output091, enc_assoc091, enc_nonce091, enc_key091,
-+	  sizeof(enc_input091), sizeof(enc_assoc091), sizeof(enc_nonce091) },
-+	{ enc_input092, enc_output092, enc_assoc092, enc_nonce092, enc_key092,
-+	  sizeof(enc_input092), sizeof(enc_assoc092), sizeof(enc_nonce092) },
- 	{ enc_input093, enc_output093, enc_assoc093, enc_nonce093, enc_key093,
- 	  sizeof(enc_input093), sizeof(enc_assoc093), sizeof(enc_nonce093) },
- 	{ enc_input094, enc_output094, enc_assoc094, enc_nonce094, enc_key094,
-@@ -7224,6 +8821,43 @@ xchacha20poly1305_dec_vectors[] __initco
- 	  sizeof(xdec_input001), sizeof(xdec_assoc001), sizeof(xdec_nonce001) }
- };
- 
-+/* This is for the selftests-only, since it is only useful for the purpose of
-+ * testing the underlying primitives and interactions.
-+ */
-+static void __init
-+chacha20poly1305_encrypt_bignonce(u8 *dst, const u8 *src, const size_t src_len,
-+				  const u8 *ad, const size_t ad_len,
-+				  const u8 nonce[12],
-+				  const u8 key[CHACHA20POLY1305_KEY_SIZE])
-+{
-+	const u8 *pad0 = page_address(ZERO_PAGE(0));
-+	struct poly1305_desc_ctx poly1305_state;
-+	u32 chacha20_state[CHACHA_STATE_WORDS];
-+	union {
-+		u8 block0[POLY1305_KEY_SIZE];
-+		__le64 lens[2];
-+	} b = {{ 0 }};
-+	u8 bottom_row[16] = { 0 };
-+	u32 le_key[8];
-+	int i;
-+
-+	memcpy(&bottom_row[4], nonce, 12);
-+	for (i = 0; i < 8; ++i)
-+		le_key[i] = get_unaligned_le32(key + sizeof(le_key[i]) * i);
-+	chacha_init(chacha20_state, le_key, bottom_row);
-+	chacha20_crypt(chacha20_state, b.block0, b.block0, sizeof(b.block0));
-+	poly1305_init(&poly1305_state, b.block0);
-+	poly1305_update(&poly1305_state, ad, ad_len);
-+	poly1305_update(&poly1305_state, pad0, (0x10 - ad_len) & 0xf);
-+	chacha20_crypt(chacha20_state, dst, src, src_len);
-+	poly1305_update(&poly1305_state, dst, src_len);
-+	poly1305_update(&poly1305_state, pad0, (0x10 - src_len) & 0xf);
-+	b.lens[0] = cpu_to_le64(ad_len);
-+	b.lens[1] = cpu_to_le64(src_len);
-+	poly1305_update(&poly1305_state, (u8 *)b.lens, sizeof(b.lens));
-+	poly1305_final(&poly1305_state, dst + src_len);
-+}
-+
- static void __init
- chacha20poly1305_selftest_encrypt(u8 *dst, const u8 *src, const size_t src_len,
- 				  const u8 *ad, const size_t ad_len,
-@@ -7233,6 +8867,9 @@ chacha20poly1305_selftest_encrypt(u8 *ds
- 	if (nonce_len == 8)
- 		chacha20poly1305_encrypt(dst, src, src_len, ad, ad_len,
- 					 get_unaligned_le64(nonce), key);
-+	else if (nonce_len == 12)
-+		chacha20poly1305_encrypt_bignonce(dst, src, src_len, ad,
-+						  ad_len, nonce, key);
- 	else
- 		BUG();
- }
-@@ -7248,14 +8885,14 @@ decryption_success(bool func_ret, bool e
- bool __init chacha20poly1305_selftest(void)
- {
- 	enum { MAXIMUM_TEST_BUFFER_LEN = 1UL << 12 };
--	size_t i;
--	u8 *computed_output = NULL, *heap_src = NULL;
--	struct scatterlist sg_src;
-+	size_t i, j, k, total_len;
-+	u8 *computed_output = NULL, *input = NULL;
- 	bool success = true, ret;
-+	struct scatterlist sg_src[3];
- 
--	heap_src = kmalloc(MAXIMUM_TEST_BUFFER_LEN, GFP_KERNEL);
- 	computed_output = kmalloc(MAXIMUM_TEST_BUFFER_LEN, GFP_KERNEL);
--	if (!heap_src || !computed_output) {
-+	input = kmalloc(MAXIMUM_TEST_BUFFER_LEN, GFP_KERNEL);
-+	if (!computed_output || !input) {
- 		pr_err("chacha20poly1305 self-test malloc: FAIL\n");
- 		success = false;
- 		goto out;
-@@ -7284,17 +8921,17 @@ bool __init chacha20poly1305_selftest(vo
- 	for (i = 0; i < ARRAY_SIZE(chacha20poly1305_enc_vectors); ++i) {
- 		if (chacha20poly1305_enc_vectors[i].nlen != 8)
- 			continue;
--		memcpy(heap_src, chacha20poly1305_enc_vectors[i].input,
-+		memcpy(computed_output, chacha20poly1305_enc_vectors[i].input,
- 		       chacha20poly1305_enc_vectors[i].ilen);
--		sg_init_one(&sg_src, heap_src,
-+		sg_init_one(sg_src, computed_output,
- 			    chacha20poly1305_enc_vectors[i].ilen + POLY1305_DIGEST_SIZE);
--		chacha20poly1305_encrypt_sg_inplace(&sg_src,
-+		ret = chacha20poly1305_encrypt_sg_inplace(sg_src,
- 			chacha20poly1305_enc_vectors[i].ilen,
- 			chacha20poly1305_enc_vectors[i].assoc,
- 			chacha20poly1305_enc_vectors[i].alen,
- 			get_unaligned_le64(chacha20poly1305_enc_vectors[i].nonce),
- 			chacha20poly1305_enc_vectors[i].key);
--		if (memcmp(heap_src,
-+		if (!ret || memcmp(computed_output,
- 				   chacha20poly1305_enc_vectors[i].output,
- 				   chacha20poly1305_enc_vectors[i].ilen +
- 							POLY1305_DIGEST_SIZE)) {
-@@ -7326,11 +8963,11 @@ bool __init chacha20poly1305_selftest(vo
- 	}
- 
- 	for (i = 0; i < ARRAY_SIZE(chacha20poly1305_dec_vectors); ++i) {
--		memcpy(heap_src, chacha20poly1305_dec_vectors[i].input,
-+		memcpy(computed_output, chacha20poly1305_dec_vectors[i].input,
- 		       chacha20poly1305_dec_vectors[i].ilen);
--		sg_init_one(&sg_src, heap_src,
-+		sg_init_one(sg_src, computed_output,
- 			    chacha20poly1305_dec_vectors[i].ilen);
--		ret = chacha20poly1305_decrypt_sg_inplace(&sg_src,
-+		ret = chacha20poly1305_decrypt_sg_inplace(sg_src,
- 			chacha20poly1305_dec_vectors[i].ilen,
- 			chacha20poly1305_dec_vectors[i].assoc,
- 			chacha20poly1305_dec_vectors[i].alen,
-@@ -7338,7 +8975,7 @@ bool __init chacha20poly1305_selftest(vo
- 			chacha20poly1305_dec_vectors[i].key);
- 		if (!decryption_success(ret,
- 			chacha20poly1305_dec_vectors[i].failure,
--			memcmp(heap_src, chacha20poly1305_dec_vectors[i].output,
-+			memcmp(computed_output, chacha20poly1305_dec_vectors[i].output,
- 			       chacha20poly1305_dec_vectors[i].ilen -
- 							POLY1305_DIGEST_SIZE))) {
- 			pr_err("chacha20poly1305 sg decryption self-test %zu: FAIL\n",
-@@ -7365,6 +9002,7 @@ bool __init chacha20poly1305_selftest(vo
- 			success = false;
- 		}
- 	}
-+
- 	for (i = 0; i < ARRAY_SIZE(xchacha20poly1305_dec_vectors); ++i) {
- 		memset(computed_output, 0, MAXIMUM_TEST_BUFFER_LEN);
- 		ret = xchacha20poly1305_decrypt(computed_output,
-@@ -7386,8 +9024,54 @@ bool __init chacha20poly1305_selftest(vo
- 		}
- 	}
- 
-+	for (total_len = POLY1305_DIGEST_SIZE; IS_ENABLED(DEBUG_CHACHA20POLY1305_SLOW_CHUNK_TEST)
-+	     && total_len <= 1 << 10; ++total_len) {
-+		for (i = 0; i <= total_len; ++i) {
-+			for (j = i; j <= total_len; ++j) {
-+				sg_init_table(sg_src, 3);
-+				sg_set_buf(&sg_src[0], input, i);
-+				sg_set_buf(&sg_src[1], input + i, j - i);
-+				sg_set_buf(&sg_src[2], input + j, total_len - j);
-+				memset(computed_output, 0, total_len);
-+				memset(input, 0, total_len);
-+
-+				if (!chacha20poly1305_encrypt_sg_inplace(sg_src,
-+					total_len - POLY1305_DIGEST_SIZE, NULL, 0,
-+					0, enc_key001))
-+					goto chunkfail;
-+				chacha20poly1305_encrypt(computed_output,
-+					computed_output,
-+					total_len - POLY1305_DIGEST_SIZE, NULL, 0, 0,
-+					enc_key001);
-+				if (memcmp(computed_output, input, total_len))
-+					goto chunkfail;
-+				if (!chacha20poly1305_decrypt(computed_output,
-+					input, total_len, NULL, 0, 0, enc_key001))
-+					goto chunkfail;
-+				for (k = 0; k < total_len - POLY1305_DIGEST_SIZE; ++k) {
-+					if (computed_output[k])
-+						goto chunkfail;
-+				}
-+				if (!chacha20poly1305_decrypt_sg_inplace(sg_src,
-+					total_len, NULL, 0, 0, enc_key001))
-+					goto chunkfail;
-+				for (k = 0; k < total_len - POLY1305_DIGEST_SIZE; ++k) {
-+					if (input[k])
-+						goto chunkfail;
-+				}
-+				continue;
-+
-+			chunkfail:
-+				pr_err("chacha20poly1305 chunked self-test %zu/%zu/%zu: FAIL\n",
-+				       total_len, i, j);
-+				success = false;
-+			}
-+
-+		}
-+	}
-+
- out:
--	kfree(heap_src);
- 	kfree(computed_output);
-+	kfree(input);
- 	return success;
- }
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0048-crypto-x86-poly1305-emit-does-base-conversion-itself.patch b/target/linux/generic/backport-5.4/080-wireguard-0048-crypto-x86-poly1305-emit-does-base-conversion-itself.patch
deleted file mode 100644
index 8209ca2898..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0048-crypto-x86-poly1305-emit-does-base-conversion-itself.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 17 Jan 2020 11:42:22 +0100
-Subject: [PATCH] crypto: x86/poly1305 - emit does base conversion itself
-
-commit f9e7fe32a792726186301423ff63a465d63386e1 upstream.
-
-The emit code does optional base conversion itself in assembly, so we
-don't need to do that here. Also, neither one of these functions uses
-simd instructions, so checking for that doesn't make sense either.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/poly1305_glue.c | 8 ++------
- 1 file changed, 2 insertions(+), 6 deletions(-)
-
---- a/arch/x86/crypto/poly1305_glue.c
-+++ b/arch/x86/crypto/poly1305_glue.c
-@@ -123,13 +123,9 @@ static void poly1305_simd_blocks(void *c
- static void poly1305_simd_emit(void *ctx, u8 mac[POLY1305_DIGEST_SIZE],
- 			       const u32 nonce[4])
- {
--	struct poly1305_arch_internal *state = ctx;
--
--	if (!IS_ENABLED(CONFIG_AS_AVX) || !static_branch_likely(&poly1305_use_avx) ||
--	    !state->is_base2_26 || !crypto_simd_usable()) {
--		convert_to_base2_64(ctx);
-+	if (!IS_ENABLED(CONFIG_AS_AVX) || !static_branch_likely(&poly1305_use_avx))
- 		poly1305_emit_x86_64(ctx, mac, nonce);
--	} else
-+	else
- 		poly1305_emit_avx(ctx, mac, nonce);
- }
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0049-crypto-arm-chacha-fix-build-failured-when-kernel-mod.patch b/target/linux/generic/backport-5.4/080-wireguard-0049-crypto-arm-chacha-fix-build-failured-when-kernel-mod.patch
deleted file mode 100644
index 354f584315..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0049-crypto-arm-chacha-fix-build-failured-when-kernel-mod.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 17 Jan 2020 17:43:18 +0100
-Subject: [PATCH] crypto: arm/chacha - fix build failured when kernel mode NEON
- is disabled
-
-commit 0bc81767c5bd9d005fae1099fb39eb3688370cb1 upstream.
-
-When the ARM accelerated ChaCha driver is built as part of a configuration
-that has kernel mode NEON disabled, we expect the compiler to propagate
-the build time constant expression IS_ENABLED(CONFIG_KERNEL_MODE_NEON) in
-a way that eliminates all the cross-object references to the actual NEON
-routines, which allows the chacha-neon-core.o object to be omitted from
-the build entirely.
-
-Unfortunately, this fails to work as expected in some cases, and we may
-end up with a build error such as
-
-  chacha-glue.c:(.text+0xc0): undefined reference to `chacha_4block_xor_neon'
-
-caused by the fact that chacha_doneon() has not been eliminated from the
-object code, even though it will never be called in practice.
-
-Let's fix this by adding some IS_ENABLED(CONFIG_KERNEL_MODE_NEON) tests
-that are not strictly needed from a logical point of view, but should
-help the compiler infer that the NEON code paths are unreachable in
-those cases.
-
-Fixes: b36d8c09e710c71f ("crypto: arm/chacha - remove dependency on generic ...")
-Reported-by: Russell King <linux@armlinux.org.uk>
-Cc: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/chacha-glue.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/crypto/chacha-glue.c
-+++ b/arch/arm/crypto/chacha-glue.c
-@@ -115,7 +115,7 @@ static int chacha_stream_xor(struct skci
- 		if (nbytes < walk.total)
- 			nbytes = round_down(nbytes, walk.stride);
- 
--		if (!neon) {
-+		if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon) {
- 			chacha_doarm(walk.dst.virt.addr, walk.src.virt.addr,
- 				     nbytes, state, ctx->nrounds);
- 			state[12] += DIV_ROUND_UP(nbytes, CHACHA_BLOCK_SIZE);
-@@ -159,7 +159,7 @@ static int do_xchacha(struct skcipher_re
- 
- 	chacha_init_generic(state, ctx->key, req->iv);
- 
--	if (!neon) {
-+	if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon) {
- 		hchacha_block_arm(state, subctx.key, ctx->nrounds);
- 	} else {
- 		kernel_neon_begin();
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0050-crypto-Kconfig-allow-tests-to-be-disabled-when-manag.patch b/target/linux/generic/backport-5.4/080-wireguard-0050-crypto-Kconfig-allow-tests-to-be-disabled-when-manag.patch
deleted file mode 100644
index c52bf0a2a7..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0050-crypto-Kconfig-allow-tests-to-be-disabled-when-manag.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 17 Jan 2020 12:01:36 +0100
-Subject: [PATCH] crypto: Kconfig - allow tests to be disabled when manager is
- disabled
-
-commit 2343d1529aff8b552589f622c23932035ed7a05d upstream.
-
-The library code uses CRYPTO_MANAGER_DISABLE_TESTS to conditionalize its
-tests, but the library code can also exist without CRYPTO_MANAGER. That
-means on minimal configs, the test code winds up being built with no way
-to disable it.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- crypto/Kconfig | 4 ----
- 1 file changed, 4 deletions(-)
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -136,8 +136,6 @@ config CRYPTO_USER
- 	  Userspace configuration for cryptographic instantiations such as
- 	  cbc(aes).
- 
--if CRYPTO_MANAGER2
--
- config CRYPTO_MANAGER_DISABLE_TESTS
- 	bool "Disable run-time self tests"
- 	default y
-@@ -155,8 +153,6 @@ config CRYPTO_MANAGER_EXTRA_TESTS
- 	  This is intended for developer use only, as these tests take much
- 	  longer to run than the normal self tests.
- 
--endif	# if CRYPTO_MANAGER2
--
- config CRYPTO_GF128MUL
- 	tristate
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0051-crypto-chacha20poly1305-prevent-integer-overflow-on-.patch b/target/linux/generic/backport-5.4/080-wireguard-0051-crypto-chacha20poly1305-prevent-integer-overflow-on-.patch
deleted file mode 100644
index 1ed49e5b6c..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0051-crypto-chacha20poly1305-prevent-integer-overflow-on-.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Thu, 6 Feb 2020 12:42:01 +0100
-Subject: [PATCH] crypto: chacha20poly1305 - prevent integer overflow on large
- input
-
-commit c9cc0517bba9f0213f1e55172feceb99e5512daf upstream.
-
-This code assigns src_len (size_t) to sl (int), which causes problems
-when src_len is very large. Probably nobody in the kernel should be
-passing this much data to chacha20poly1305 all in one go anyway, so I
-don't think we need to change the algorithm or introduce larger types
-or anything. But we should at least error out early in this case and
-print a warning so that we get reports if this does happen and can look
-into why anybody is possibly passing it that much data or if they're
-accidently passing -1 or similar.
-
-Fixes: d95312a3ccc0 ("crypto: lib/chacha20poly1305 - reimplement crypt_from_sg() routine")
-Cc: Ard Biesheuvel <ardb@kernel.org>
-Cc: stable@vger.kernel.org # 5.5+
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Acked-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- lib/crypto/chacha20poly1305.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/lib/crypto/chacha20poly1305.c
-+++ b/lib/crypto/chacha20poly1305.c
-@@ -235,6 +235,9 @@ bool chacha20poly1305_crypt_sg_inplace(s
- 		__le64 lens[2];
- 	} b __aligned(16);
- 
-+	if (WARN_ON(src_len > INT_MAX))
-+		return false;
-+
- 	chacha_load_key(b.k, key);
- 
- 	b.iv[0] = 0;
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0052-crypto-x86-curve25519-support-assemblers-with-no-adx.patch b/target/linux/generic/backport-5.4/080-wireguard-0052-crypto-x86-curve25519-support-assemblers-with-no-adx.patch
deleted file mode 100644
index cd507b1e44..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0052-crypto-x86-curve25519-support-assemblers-with-no-adx.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Sun, 1 Mar 2020 22:52:35 +0800
-Subject: [PATCH] crypto: x86/curve25519 - support assemblers with no adx
- support
-
-commit 1579f1bc3b753d17a44de3457d5c6f4a5b14c752 upstream.
-
-Some older version of GAS do not support the ADX instructions, similarly
-to how they also don't support AVX and such. This commit adds the same
-build-time detection mechanisms we use for AVX and others for ADX, and
-then makes sure that the curve25519 library dispatcher calls the right
-functions.
-
-Reported-by: Willy Tarreau <w@1wt.eu>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/Makefile           | 5 +++--
- arch/x86/crypto/Makefile    | 7 ++++++-
- include/crypto/curve25519.h | 6 ++++--
- 3 files changed, 13 insertions(+), 5 deletions(-)
-
---- a/arch/x86/Makefile
-+++ b/arch/x86/Makefile
-@@ -198,9 +198,10 @@ avx2_instr :=$(call as-instr,vpbroadcast
- avx512_instr :=$(call as-instr,vpmovm2b %k1$(comma)%zmm5,-DCONFIG_AS_AVX512=1)
- sha1_ni_instr :=$(call as-instr,sha1msg1 %xmm0$(comma)%xmm1,-DCONFIG_AS_SHA1_NI=1)
- sha256_ni_instr :=$(call as-instr,sha256msg1 %xmm0$(comma)%xmm1,-DCONFIG_AS_SHA256_NI=1)
-+adx_instr := $(call as-instr,adox %r10$(comma)%r10,-DCONFIG_AS_ADX=1)
- 
--KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr)
--KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr)
-+KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr) $(adx_instr)
-+KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr) $(adx_instr)
- 
- KBUILD_LDFLAGS := -m elf_$(UTS_MACHINE)
- 
---- a/arch/x86/crypto/Makefile
-+++ b/arch/x86/crypto/Makefile
-@@ -11,6 +11,7 @@ avx2_supported := $(call as-instr,vpgath
- avx512_supported :=$(call as-instr,vpmovm2b %k1$(comma)%zmm5,yes,no)
- sha1_ni_supported :=$(call as-instr,sha1msg1 %xmm0$(comma)%xmm1,yes,no)
- sha256_ni_supported :=$(call as-instr,sha256msg1 %xmm0$(comma)%xmm1,yes,no)
-+adx_supported := $(call as-instr,adox %r10$(comma)%r10,yes,no)
- 
- obj-$(CONFIG_CRYPTO_GLUE_HELPER_X86) += glue_helper.o
- 
-@@ -39,7 +40,11 @@ obj-$(CONFIG_CRYPTO_AEGIS128_AESNI_SSE2)
- 
- obj-$(CONFIG_CRYPTO_NHPOLY1305_SSE2) += nhpoly1305-sse2.o
- obj-$(CONFIG_CRYPTO_NHPOLY1305_AVX2) += nhpoly1305-avx2.o
--obj-$(CONFIG_CRYPTO_CURVE25519_X86) += curve25519-x86_64.o
-+
-+# These modules require the assembler to support ADX.
-+ifeq ($(adx_supported),yes)
-+	obj-$(CONFIG_CRYPTO_CURVE25519_X86) += curve25519-x86_64.o
-+endif
- 
- # These modules require assembler to support AVX.
- ifeq ($(avx_supported),yes)
---- a/include/crypto/curve25519.h
-+++ b/include/crypto/curve25519.h
-@@ -33,7 +33,8 @@ bool __must_check curve25519(u8 mypublic
- 			     const u8 secret[CURVE25519_KEY_SIZE],
- 			     const u8 basepoint[CURVE25519_KEY_SIZE])
- {
--	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519))
-+	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519) &&
-+	    (!IS_ENABLED(CONFIG_CRYPTO_CURVE25519_X86) || IS_ENABLED(CONFIG_AS_ADX)))
- 		curve25519_arch(mypublic, secret, basepoint);
- 	else
- 		curve25519_generic(mypublic, secret, basepoint);
-@@ -49,7 +50,8 @@ __must_check curve25519_generate_public(
- 				    CURVE25519_KEY_SIZE)))
- 		return false;
- 
--	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519))
-+	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519) &&
-+	    (!IS_ENABLED(CONFIG_CRYPTO_CURVE25519_X86) || IS_ENABLED(CONFIG_AS_ADX)))
- 		curve25519_base_arch(pub, secret);
- 	else
- 		curve25519_generic(pub, secret, curve25519_base_point);
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0053-crypto-arm64-chacha-correctly-walk-through-blocks.patch b/target/linux/generic/backport-5.4/080-wireguard-0053-crypto-arm64-chacha-correctly-walk-through-blocks.patch
deleted file mode 100644
index 823a908373..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0053-crypto-arm64-chacha-correctly-walk-through-blocks.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Wed, 18 Mar 2020 20:27:32 -0600
-Subject: [PATCH] crypto: arm64/chacha - correctly walk through blocks
-
-commit c8cfcb78c65877313cda7bcbace624d3dbd1f3b3 upstream.
-
-Prior, passing in chunks of 2, 3, or 4, followed by any additional
-chunks would result in the chacha state counter getting out of sync,
-resulting in incorrect encryption/decryption, which is a pretty nasty
-crypto vuln: "why do images look weird on webpages?" WireGuard users
-never experienced this prior, because we have always, out of tree, used
-a different crypto library, until the recent Frankenzinc addition. This
-commit fixes the issue by advancing the pointers and state counter by
-the actual size processed. It also fixes up a bug in the (optional,
-costly) stride test that prevented it from running on arm64.
-
-Fixes: b3aad5bad26a ("crypto: arm64/chacha - expose arm64 ChaCha routine as library function")
-Reported-and-tested-by: Emil Renner Berthing <kernel@esmil.dk>
-Cc: Ard Biesheuvel <ardb@kernel.org>
-Cc: stable@vger.kernel.org # v5.5+
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Reviewed-by: Eric Biggers <ebiggers@google.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm64/crypto/chacha-neon-glue.c   |  8 ++++----
- lib/crypto/chacha20poly1305-selftest.c | 11 ++++++++---
- 2 files changed, 12 insertions(+), 7 deletions(-)
-
---- a/arch/arm64/crypto/chacha-neon-glue.c
-+++ b/arch/arm64/crypto/chacha-neon-glue.c
-@@ -55,10 +55,10 @@ static void chacha_doneon(u32 *state, u8
- 			break;
- 		}
- 		chacha_4block_xor_neon(state, dst, src, nrounds, l);
--		bytes -= CHACHA_BLOCK_SIZE * 5;
--		src += CHACHA_BLOCK_SIZE * 5;
--		dst += CHACHA_BLOCK_SIZE * 5;
--		state[12] += 5;
-+		bytes -= l;
-+		src += l;
-+		dst += l;
-+		state[12] += DIV_ROUND_UP(l, CHACHA_BLOCK_SIZE);
- 	}
- }
- 
---- a/lib/crypto/chacha20poly1305-selftest.c
-+++ b/lib/crypto/chacha20poly1305-selftest.c
-@@ -9028,10 +9028,15 @@ bool __init chacha20poly1305_selftest(vo
- 	     && total_len <= 1 << 10; ++total_len) {
- 		for (i = 0; i <= total_len; ++i) {
- 			for (j = i; j <= total_len; ++j) {
-+				k = 0;
- 				sg_init_table(sg_src, 3);
--				sg_set_buf(&sg_src[0], input, i);
--				sg_set_buf(&sg_src[1], input + i, j - i);
--				sg_set_buf(&sg_src[2], input + j, total_len - j);
-+				if (i)
-+					sg_set_buf(&sg_src[k++], input, i);
-+				if (j - i)
-+					sg_set_buf(&sg_src[k++], input + i, j - i);
-+				if (total_len - j)
-+					sg_set_buf(&sg_src[k++], input + j, total_len - j);
-+				sg_init_marker(sg_src, k);
- 				memset(computed_output, 0, total_len);
- 				memset(input, 0, total_len);
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0054-crypto-x86-curve25519-replace-with-formally-verified.patch b/target/linux/generic/backport-5.4/080-wireguard-0054-crypto-x86-curve25519-replace-with-formally-verified.patch
deleted file mode 100644
index 938d700da2..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0054-crypto-x86-curve25519-replace-with-formally-verified.patch
+++ /dev/null
@@ -1,3765 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Mon, 20 Jan 2020 18:18:15 +0100
-Subject: [PATCH] crypto: x86/curve25519 - replace with formally verified
- implementation
-
-commit 07b586fe06625b0b610dc3d3a969c51913d143d4 upstream.
-
-This comes from INRIA's HACL*/Vale. It implements the same algorithm and
-implementation strategy as the code it replaces, only this code has been
-formally verified, sans the base point multiplication, which uses code
-similar to prior, only it uses the formally verified field arithmetic
-alongside reproducable ladder generation steps. This doesn't have a
-pure-bmi2 version, which means haswell no longer benefits, but the
-increased (doubled) code complexity is not worth it for a single
-generation of chips that's already old.
-
-Performance-wise, this is around 1% slower on older microarchitectures,
-and slightly faster on newer microarchitectures, mainly 10nm ones or
-backports of 10nm to 14nm. This implementation is "everest" below:
-
-Xeon E5-2680 v4 (Broadwell)
-
-     armfazh: 133340 cycles per call
-     everest: 133436 cycles per call
-
-Xeon Gold 5120 (Sky Lake Server)
-
-     armfazh: 112636 cycles per call
-     everest: 113906 cycles per call
-
-Core i5-6300U (Sky Lake Client)
-
-     armfazh: 116810 cycles per call
-     everest: 117916 cycles per call
-
-Core i7-7600U (Kaby Lake)
-
-     armfazh: 119523 cycles per call
-     everest: 119040 cycles per call
-
-Core i7-8750H (Coffee Lake)
-
-     armfazh: 113914 cycles per call
-     everest: 113650 cycles per call
-
-Core i9-9880H (Coffee Lake Refresh)
-
-     armfazh: 112616 cycles per call
-     everest: 114082 cycles per call
-
-Core i3-8121U (Cannon Lake)
-
-     armfazh: 113202 cycles per call
-     everest: 111382 cycles per call
-
-Core i7-8265U (Whiskey Lake)
-
-     armfazh: 127307 cycles per call
-     everest: 127697 cycles per call
-
-Core i7-8550U (Kaby Lake Refresh)
-
-     armfazh: 127522 cycles per call
-     everest: 127083 cycles per call
-
-Xeon Platinum 8275CL (Cascade Lake)
-
-     armfazh: 114380 cycles per call
-     everest: 114656 cycles per call
-
-Achieving these kind of results with formally verified code is quite
-remarkable, especialy considering that performance is favorable for
-newer chips.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/curve25519-x86_64.c | 3546 ++++++++++-----------------
- 1 file changed, 1292 insertions(+), 2254 deletions(-)
-
---- a/arch/x86/crypto/curve25519-x86_64.c
-+++ b/arch/x86/crypto/curve25519-x86_64.c
-@@ -1,8 +1,7 @@
--// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
-+// SPDX-License-Identifier: GPL-2.0 OR MIT
- /*
-- * Copyright (c) 2017 Armando Faz <armfazh@ic.unicamp.br>. All Rights Reserved.
-- * Copyright (C) 2018-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-- * Copyright (C) 2018 Samuel Neves <sneves@dei.uc.pt>. All Rights Reserved.
-+ * Copyright (C) 2020 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ * Copyright (c) 2016-2020 INRIA, CMU and Microsoft Corporation
-  */
- 
- #include <crypto/curve25519.h>
-@@ -16,2337 +15,1378 @@
- #include <asm/cpufeature.h>
- #include <asm/processor.h>
- 
--static __ro_after_init DEFINE_STATIC_KEY_FALSE(curve25519_use_bmi2);
--static __ro_after_init DEFINE_STATIC_KEY_FALSE(curve25519_use_adx);
--
--enum { NUM_WORDS_ELTFP25519 = 4 };
--typedef __aligned(32) u64 eltfp25519_1w[NUM_WORDS_ELTFP25519];
--typedef __aligned(32) u64 eltfp25519_1w_buffer[2 * NUM_WORDS_ELTFP25519];
--
--#define mul_eltfp25519_1w_adx(c, a, b) do { \
--	mul_256x256_integer_adx(m.buffer, a, b); \
--	red_eltfp25519_1w_adx(c, m.buffer); \
--} while (0)
--
--#define mul_eltfp25519_1w_bmi2(c, a, b) do { \
--	mul_256x256_integer_bmi2(m.buffer, a, b); \
--	red_eltfp25519_1w_bmi2(c, m.buffer); \
--} while (0)
--
--#define sqr_eltfp25519_1w_adx(a) do { \
--	sqr_256x256_integer_adx(m.buffer, a); \
--	red_eltfp25519_1w_adx(a, m.buffer); \
--} while (0)
--
--#define sqr_eltfp25519_1w_bmi2(a) do { \
--	sqr_256x256_integer_bmi2(m.buffer, a); \
--	red_eltfp25519_1w_bmi2(a, m.buffer); \
--} while (0)
--
--#define mul_eltfp25519_2w_adx(c, a, b) do { \
--	mul2_256x256_integer_adx(m.buffer, a, b); \
--	red_eltfp25519_2w_adx(c, m.buffer); \
--} while (0)
--
--#define mul_eltfp25519_2w_bmi2(c, a, b) do { \
--	mul2_256x256_integer_bmi2(m.buffer, a, b); \
--	red_eltfp25519_2w_bmi2(c, m.buffer); \
--} while (0)
--
--#define sqr_eltfp25519_2w_adx(a) do { \
--	sqr2_256x256_integer_adx(m.buffer, a); \
--	red_eltfp25519_2w_adx(a, m.buffer); \
--} while (0)
--
--#define sqr_eltfp25519_2w_bmi2(a) do { \
--	sqr2_256x256_integer_bmi2(m.buffer, a); \
--	red_eltfp25519_2w_bmi2(a, m.buffer); \
--} while (0)
--
--#define sqrn_eltfp25519_1w_adx(a, times) do { \
--	int ____counter = (times); \
--	while (____counter-- > 0) \
--		sqr_eltfp25519_1w_adx(a); \
--} while (0)
--
--#define sqrn_eltfp25519_1w_bmi2(a, times) do { \
--	int ____counter = (times); \
--	while (____counter-- > 0) \
--		sqr_eltfp25519_1w_bmi2(a); \
--} while (0)
--
--#define copy_eltfp25519_1w(C, A) do { \
--	(C)[0] = (A)[0]; \
--	(C)[1] = (A)[1]; \
--	(C)[2] = (A)[2]; \
--	(C)[3] = (A)[3]; \
--} while (0)
--
--#define setzero_eltfp25519_1w(C) do { \
--	(C)[0] = 0; \
--	(C)[1] = 0; \
--	(C)[2] = 0; \
--	(C)[3] = 0; \
--} while (0)
--
--__aligned(32) static const u64 table_ladder_8k[252 * NUM_WORDS_ELTFP25519] = {
--	/*   1 */ 0xfffffffffffffff3UL, 0xffffffffffffffffUL,
--		  0xffffffffffffffffUL, 0x5fffffffffffffffUL,
--	/*   2 */ 0x6b8220f416aafe96UL, 0x82ebeb2b4f566a34UL,
--		  0xd5a9a5b075a5950fUL, 0x5142b2cf4b2488f4UL,
--	/*   3 */ 0x6aaebc750069680cUL, 0x89cf7820a0f99c41UL,
--		  0x2a58d9183b56d0f4UL, 0x4b5aca80e36011a4UL,
--	/*   4 */ 0x329132348c29745dUL, 0xf4a2e616e1642fd7UL,
--		  0x1e45bb03ff67bc34UL, 0x306912d0f42a9b4aUL,
--	/*   5 */ 0xff886507e6af7154UL, 0x04f50e13dfeec82fUL,
--		  0xaa512fe82abab5ceUL, 0x174e251a68d5f222UL,
--	/*   6 */ 0xcf96700d82028898UL, 0x1743e3370a2c02c5UL,
--		  0x379eec98b4e86eaaUL, 0x0c59888a51e0482eUL,
--	/*   7 */ 0xfbcbf1d699b5d189UL, 0xacaef0d58e9fdc84UL,
--		  0xc1c20d06231f7614UL, 0x2938218da274f972UL,
--	/*   8 */ 0xf6af49beff1d7f18UL, 0xcc541c22387ac9c2UL,
--		  0x96fcc9ef4015c56bUL, 0x69c1627c690913a9UL,
--	/*   9 */ 0x7a86fd2f4733db0eUL, 0xfdb8c4f29e087de9UL,
--		  0x095e4b1a8ea2a229UL, 0x1ad7a7c829b37a79UL,
--	/*  10 */ 0x342d89cad17ea0c0UL, 0x67bedda6cced2051UL,
--		  0x19ca31bf2bb42f74UL, 0x3df7b4c84980acbbUL,
--	/*  11 */ 0xa8c6444dc80ad883UL, 0xb91e440366e3ab85UL,
--		  0xc215cda00164f6d8UL, 0x3d867c6ef247e668UL,
--	/*  12 */ 0xc7dd582bcc3e658cUL, 0xfd2c4748ee0e5528UL,
--		  0xa0fd9b95cc9f4f71UL, 0x7529d871b0675ddfUL,
--	/*  13 */ 0xb8f568b42d3cbd78UL, 0x1233011b91f3da82UL,
--		  0x2dce6ccd4a7c3b62UL, 0x75e7fc8e9e498603UL,
--	/*  14 */ 0x2f4f13f1fcd0b6ecUL, 0xf1a8ca1f29ff7a45UL,
--		  0xc249c1a72981e29bUL, 0x6ebe0dbb8c83b56aUL,
--	/*  15 */ 0x7114fa8d170bb222UL, 0x65a2dcd5bf93935fUL,
--		  0xbdc41f68b59c979aUL, 0x2f0eef79a2ce9289UL,
--	/*  16 */ 0x42ecbf0c083c37ceUL, 0x2930bc09ec496322UL,
--		  0xf294b0c19cfeac0dUL, 0x3780aa4bedfabb80UL,
--	/*  17 */ 0x56c17d3e7cead929UL, 0xe7cb4beb2e5722c5UL,
--		  0x0ce931732dbfe15aUL, 0x41b883c7621052f8UL,
--	/*  18 */ 0xdbf75ca0c3d25350UL, 0x2936be086eb1e351UL,
--		  0xc936e03cb4a9b212UL, 0x1d45bf82322225aaUL,
--	/*  19 */ 0xe81ab1036a024cc5UL, 0xe212201c304c9a72UL,
--		  0xc5d73fba6832b1fcUL, 0x20ffdb5a4d839581UL,
--	/*  20 */ 0xa283d367be5d0fadUL, 0x6c2b25ca8b164475UL,
--		  0x9d4935467caaf22eUL, 0x5166408eee85ff49UL,
--	/*  21 */ 0x3c67baa2fab4e361UL, 0xb3e433c67ef35cefUL,
--		  0x5259729241159b1cUL, 0x6a621892d5b0ab33UL,
--	/*  22 */ 0x20b74a387555cdcbUL, 0x532aa10e1208923fUL,
--		  0xeaa17b7762281dd1UL, 0x61ab3443f05c44bfUL,
--	/*  23 */ 0x257a6c422324def8UL, 0x131c6c1017e3cf7fUL,
--		  0x23758739f630a257UL, 0x295a407a01a78580UL,
--	/*  24 */ 0xf8c443246d5da8d9UL, 0x19d775450c52fa5dUL,
--		  0x2afcfc92731bf83dUL, 0x7d10c8e81b2b4700UL,
--	/*  25 */ 0xc8e0271f70baa20bUL, 0x993748867ca63957UL,
--		  0x5412efb3cb7ed4bbUL, 0x3196d36173e62975UL,
--	/*  26 */ 0xde5bcad141c7dffcUL, 0x47cc8cd2b395c848UL,
--		  0xa34cd942e11af3cbUL, 0x0256dbf2d04ecec2UL,
--	/*  27 */ 0x875ab7e94b0e667fUL, 0xcad4dd83c0850d10UL,
--		  0x47f12e8f4e72c79fUL, 0x5f1a87bb8c85b19bUL,
--	/*  28 */ 0x7ae9d0b6437f51b8UL, 0x12c7ce5518879065UL,
--		  0x2ade09fe5cf77aeeUL, 0x23a05a2f7d2c5627UL,
--	/*  29 */ 0x5908e128f17c169aUL, 0xf77498dd8ad0852dUL,
--		  0x74b4c4ceab102f64UL, 0x183abadd10139845UL,
--	/*  30 */ 0xb165ba8daa92aaacUL, 0xd5c5ef9599386705UL,
--		  0xbe2f8f0cf8fc40d1UL, 0x2701e635ee204514UL,
--	/*  31 */ 0x629fa80020156514UL, 0xf223868764a8c1ceUL,
--		  0x5b894fff0b3f060eUL, 0x60d9944cf708a3faUL,
--	/*  32 */ 0xaeea001a1c7a201fUL, 0xebf16a633ee2ce63UL,
--		  0x6f7709594c7a07e1UL, 0x79b958150d0208cbUL,
--	/*  33 */ 0x24b55e5301d410e7UL, 0xe3a34edff3fdc84dUL,
--		  0xd88768e4904032d8UL, 0x131384427b3aaeecUL,
--	/*  34 */ 0x8405e51286234f14UL, 0x14dc4739adb4c529UL,
--		  0xb8a2b5b250634ffdUL, 0x2fe2a94ad8a7ff93UL,
--	/*  35 */ 0xec5c57efe843faddUL, 0x2843ce40f0bb9918UL,
--		  0xa4b561d6cf3d6305UL, 0x743629bde8fb777eUL,
--	/*  36 */ 0x343edd46bbaf738fUL, 0xed981828b101a651UL,
--		  0xa401760b882c797aUL, 0x1fc223e28dc88730UL,
--	/*  37 */ 0x48604e91fc0fba0eUL, 0xb637f78f052c6fa4UL,
--		  0x91ccac3d09e9239cUL, 0x23f7eed4437a687cUL,
--	/*  38 */ 0x5173b1118d9bd800UL, 0x29d641b63189d4a7UL,
--		  0xfdbf177988bbc586UL, 0x2959894fcad81df5UL,
--	/*  39 */ 0xaebc8ef3b4bbc899UL, 0x4148995ab26992b9UL,
--		  0x24e20b0134f92cfbUL, 0x40d158894a05dee8UL,
--	/*  40 */ 0x46b00b1185af76f6UL, 0x26bac77873187a79UL,
--		  0x3dc0bf95ab8fff5fUL, 0x2a608bd8945524d7UL,
--	/*  41 */ 0x26449588bd446302UL, 0x7c4bc21c0388439cUL,
--		  0x8e98a4f383bd11b2UL, 0x26218d7bc9d876b9UL,
--	/*  42 */ 0xe3081542997c178aUL, 0x3c2d29a86fb6606fUL,
--		  0x5c217736fa279374UL, 0x7dde05734afeb1faUL,
--	/*  43 */ 0x3bf10e3906d42babUL, 0xe4f7803e1980649cUL,
--		  0xe6053bf89595bf7aUL, 0x394faf38da245530UL,
--	/*  44 */ 0x7a8efb58896928f4UL, 0xfbc778e9cc6a113cUL,
--		  0x72670ce330af596fUL, 0x48f222a81d3d6cf7UL,
--	/*  45 */ 0xf01fce410d72caa7UL, 0x5a20ecc7213b5595UL,
--		  0x7bc21165c1fa1483UL, 0x07f89ae31da8a741UL,
--	/*  46 */ 0x05d2c2b4c6830ff9UL, 0xd43e330fc6316293UL,
--		  0xa5a5590a96d3a904UL, 0x705edb91a65333b6UL,
--	/*  47 */ 0x048ee15e0bb9a5f7UL, 0x3240cfca9e0aaf5dUL,
--		  0x8f4b71ceedc4a40bUL, 0x621c0da3de544a6dUL,
--	/*  48 */ 0x92872836a08c4091UL, 0xce8375b010c91445UL,
--		  0x8a72eb524f276394UL, 0x2667fcfa7ec83635UL,
--	/*  49 */ 0x7f4c173345e8752aUL, 0x061b47feee7079a5UL,
--		  0x25dd9afa9f86ff34UL, 0x3780cef5425dc89cUL,
--	/*  50 */ 0x1a46035a513bb4e9UL, 0x3e1ef379ac575adaUL,
--		  0xc78c5f1c5fa24b50UL, 0x321a967634fd9f22UL,
--	/*  51 */ 0x946707b8826e27faUL, 0x3dca84d64c506fd0UL,
--		  0xc189218075e91436UL, 0x6d9284169b3b8484UL,
--	/*  52 */ 0x3a67e840383f2ddfUL, 0x33eec9a30c4f9b75UL,
--		  0x3ec7c86fa783ef47UL, 0x26ec449fbac9fbc4UL,
--	/*  53 */ 0x5c0f38cba09b9e7dUL, 0x81168cc762a3478cUL,
--		  0x3e23b0d306fc121cUL, 0x5a238aa0a5efdcddUL,
--	/*  54 */ 0x1ba26121c4ea43ffUL, 0x36f8c77f7c8832b5UL,
--		  0x88fbea0b0adcf99aUL, 0x5ca9938ec25bebf9UL,
--	/*  55 */ 0xd5436a5e51fccda0UL, 0x1dbc4797c2cd893bUL,
--		  0x19346a65d3224a08UL, 0x0f5034e49b9af466UL,
--	/*  56 */ 0xf23c3967a1e0b96eUL, 0xe58b08fa867a4d88UL,
--		  0xfb2fabc6a7341679UL, 0x2a75381eb6026946UL,
--	/*  57 */ 0xc80a3be4c19420acUL, 0x66b1f6c681f2b6dcUL,
--		  0x7cf7036761e93388UL, 0x25abbbd8a660a4c4UL,
--	/*  58 */ 0x91ea12ba14fd5198UL, 0x684950fc4a3cffa9UL,
--		  0xf826842130f5ad28UL, 0x3ea988f75301a441UL,
--	/*  59 */ 0xc978109a695f8c6fUL, 0x1746eb4a0530c3f3UL,
--		  0x444d6d77b4459995UL, 0x75952b8c054e5cc7UL,
--	/*  60 */ 0xa3703f7915f4d6aaUL, 0x66c346202f2647d8UL,
--		  0xd01469df811d644bUL, 0x77fea47d81a5d71fUL,
--	/*  61 */ 0xc5e9529ef57ca381UL, 0x6eeeb4b9ce2f881aUL,
--		  0xb6e91a28e8009bd6UL, 0x4b80be3e9afc3fecUL,
--	/*  62 */ 0x7e3773c526aed2c5UL, 0x1b4afcb453c9a49dUL,
--		  0xa920bdd7baffb24dUL, 0x7c54699f122d400eUL,
--	/*  63 */ 0xef46c8e14fa94bc8UL, 0xe0b074ce2952ed5eUL,
--		  0xbea450e1dbd885d5UL, 0x61b68649320f712cUL,
--	/*  64 */ 0x8a485f7309ccbdd1UL, 0xbd06320d7d4d1a2dUL,
--		  0x25232973322dbef4UL, 0x445dc4758c17f770UL,
--	/*  65 */ 0xdb0434177cc8933cUL, 0xed6fe82175ea059fUL,
--		  0x1efebefdc053db34UL, 0x4adbe867c65daf99UL,
--	/*  66 */ 0x3acd71a2a90609dfUL, 0xe5e991856dd04050UL,
--		  0x1ec69b688157c23cUL, 0x697427f6885cfe4dUL,
--	/*  67 */ 0xd7be7b9b65e1a851UL, 0xa03d28d522c536ddUL,
--		  0x28399d658fd2b645UL, 0x49e5b7e17c2641e1UL,
--	/*  68 */ 0x6f8c3a98700457a4UL, 0x5078f0a25ebb6778UL,
--		  0xd13c3ccbc382960fUL, 0x2e003258a7df84b1UL,
--	/*  69 */ 0x8ad1f39be6296a1cUL, 0xc1eeaa652a5fbfb2UL,
--		  0x33ee0673fd26f3cbUL, 0x59256173a69d2cccUL,
--	/*  70 */ 0x41ea07aa4e18fc41UL, 0xd9fc19527c87a51eUL,
--		  0xbdaacb805831ca6fUL, 0x445b652dc916694fUL,
--	/*  71 */ 0xce92a3a7f2172315UL, 0x1edc282de11b9964UL,
--		  0xa1823aafe04c314aUL, 0x790a2d94437cf586UL,
--	/*  72 */ 0x71c447fb93f6e009UL, 0x8922a56722845276UL,
--		  0xbf70903b204f5169UL, 0x2f7a89891ba319feUL,
--	/*  73 */ 0x02a08eb577e2140cUL, 0xed9a4ed4427bdcf4UL,
--		  0x5253ec44e4323cd1UL, 0x3e88363c14e9355bUL,
--	/*  74 */ 0xaa66c14277110b8cUL, 0x1ae0391610a23390UL,
--		  0x2030bd12c93fc2a2UL, 0x3ee141579555c7abUL,
--	/*  75 */ 0x9214de3a6d6e7d41UL, 0x3ccdd88607f17efeUL,
--		  0x674f1288f8e11217UL, 0x5682250f329f93d0UL,
--	/*  76 */ 0x6cf00b136d2e396eUL, 0x6e4cf86f1014debfUL,
--		  0x5930b1b5bfcc4e83UL, 0x047069b48aba16b6UL,
--	/*  77 */ 0x0d4ce4ab69b20793UL, 0xb24db91a97d0fb9eUL,
--		  0xcdfa50f54e00d01dUL, 0x221b1085368bddb5UL,
--	/*  78 */ 0xe7e59468b1e3d8d2UL, 0x53c56563bd122f93UL,
--		  0xeee8a903e0663f09UL, 0x61efa662cbbe3d42UL,
--	/*  79 */ 0x2cf8ddddde6eab2aUL, 0x9bf80ad51435f231UL,
--		  0x5deadacec9f04973UL, 0x29275b5d41d29b27UL,
--	/*  80 */ 0xcfde0f0895ebf14fUL, 0xb9aab96b054905a7UL,
--		  0xcae80dd9a1c420fdUL, 0x0a63bf2f1673bbc7UL,
--	/*  81 */ 0x092f6e11958fbc8cUL, 0x672a81e804822fadUL,
--		  0xcac8351560d52517UL, 0x6f3f7722c8f192f8UL,
--	/*  82 */ 0xf8ba90ccc2e894b7UL, 0x2c7557a438ff9f0dUL,
--		  0x894d1d855ae52359UL, 0x68e122157b743d69UL,
--	/*  83 */ 0xd87e5570cfb919f3UL, 0x3f2cdecd95798db9UL,
--		  0x2121154710c0a2ceUL, 0x3c66a115246dc5b2UL,
--	/*  84 */ 0xcbedc562294ecb72UL, 0xba7143c36a280b16UL,
--		  0x9610c2efd4078b67UL, 0x6144735d946a4b1eUL,
--	/*  85 */ 0x536f111ed75b3350UL, 0x0211db8c2041d81bUL,
--		  0xf93cb1000e10413cUL, 0x149dfd3c039e8876UL,
--	/*  86 */ 0xd479dde46b63155bUL, 0xb66e15e93c837976UL,
--		  0xdafde43b1f13e038UL, 0x5fafda1a2e4b0b35UL,
--	/*  87 */ 0x3600bbdf17197581UL, 0x3972050bbe3cd2c2UL,
--		  0x5938906dbdd5be86UL, 0x34fce5e43f9b860fUL,
--	/*  88 */ 0x75a8a4cd42d14d02UL, 0x828dabc53441df65UL,
--		  0x33dcabedd2e131d3UL, 0x3ebad76fb814d25fUL,
--	/*  89 */ 0xd4906f566f70e10fUL, 0x5d12f7aa51690f5aUL,
--		  0x45adb16e76cefcf2UL, 0x01f768aead232999UL,
--	/*  90 */ 0x2b6cc77b6248febdUL, 0x3cd30628ec3aaffdUL,
--		  0xce1c0b80d4ef486aUL, 0x4c3bff2ea6f66c23UL,
--	/*  91 */ 0x3f2ec4094aeaeb5fUL, 0x61b19b286e372ca7UL,
--		  0x5eefa966de2a701dUL, 0x23b20565de55e3efUL,
--	/*  92 */ 0xe301ca5279d58557UL, 0x07b2d4ce27c2874fUL,
--		  0xa532cd8a9dcf1d67UL, 0x2a52fee23f2bff56UL,
--	/*  93 */ 0x8624efb37cd8663dUL, 0xbbc7ac20ffbd7594UL,
--		  0x57b85e9c82d37445UL, 0x7b3052cb86a6ec66UL,
--	/*  94 */ 0x3482f0ad2525e91eUL, 0x2cb68043d28edca0UL,
--		  0xaf4f6d052e1b003aUL, 0x185f8c2529781b0aUL,
--	/*  95 */ 0xaa41de5bd80ce0d6UL, 0x9407b2416853e9d6UL,
--		  0x563ec36e357f4c3aUL, 0x4cc4b8dd0e297bceUL,
--	/*  96 */ 0xa2fc1a52ffb8730eUL, 0x1811f16e67058e37UL,
--		  0x10f9a366cddf4ee1UL, 0x72f4a0c4a0b9f099UL,
--	/*  97 */ 0x8c16c06f663f4ea7UL, 0x693b3af74e970fbaUL,
--		  0x2102e7f1d69ec345UL, 0x0ba53cbc968a8089UL,
--	/*  98 */ 0xca3d9dc7fea15537UL, 0x4c6824bb51536493UL,
--		  0xb9886314844006b1UL, 0x40d2a72ab454cc60UL,
--	/*  99 */ 0x5936a1b712570975UL, 0x91b9d648debda657UL,
--		  0x3344094bb64330eaUL, 0x006ba10d12ee51d0UL,
--	/* 100 */ 0x19228468f5de5d58UL, 0x0eb12f4c38cc05b0UL,
--		  0xa1039f9dd5601990UL, 0x4502d4ce4fff0e0bUL,
--	/* 101 */ 0xeb2054106837c189UL, 0xd0f6544c6dd3b93cUL,
--		  0x40727064c416d74fUL, 0x6e15c6114b502ef0UL,
--	/* 102 */ 0x4df2a398cfb1a76bUL, 0x11256c7419f2f6b1UL,
--		  0x4a497962066e6043UL, 0x705b3aab41355b44UL,
--	/* 103 */ 0x365ef536d797b1d8UL, 0x00076bd622ddf0dbUL,
--		  0x3bbf33b0e0575a88UL, 0x3777aa05c8e4ca4dUL,
--	/* 104 */ 0x392745c85578db5fUL, 0x6fda4149dbae5ae2UL,
--		  0xb1f0b00b8adc9867UL, 0x09963437d36f1da3UL,
--	/* 105 */ 0x7e824e90a5dc3853UL, 0xccb5f6641f135cbdUL,
--		  0x6736d86c87ce8fccUL, 0x625f3ce26604249fUL,
--	/* 106 */ 0xaf8ac8059502f63fUL, 0x0c05e70a2e351469UL,
--		  0x35292e9c764b6305UL, 0x1a394360c7e23ac3UL,
--	/* 107 */ 0xd5c6d53251183264UL, 0x62065abd43c2b74fUL,
--		  0xb5fbf5d03b973f9bUL, 0x13a3da3661206e5eUL,
--	/* 108 */ 0xc6bd5837725d94e5UL, 0x18e30912205016c5UL,
--		  0x2088ce1570033c68UL, 0x7fba1f495c837987UL,
--	/* 109 */ 0x5a8c7423f2f9079dUL, 0x1735157b34023fc5UL,
--		  0xe4f9b49ad2fab351UL, 0x6691ff72c878e33cUL,
--	/* 110 */ 0x122c2adedc5eff3eUL, 0xf8dd4bf1d8956cf4UL,
--		  0xeb86205d9e9e5bdaUL, 0x049b92b9d975c743UL,
--	/* 111 */ 0xa5379730b0f6c05aUL, 0x72a0ffacc6f3a553UL,
--		  0xb0032c34b20dcd6dUL, 0x470e9dbc88d5164aUL,
--	/* 112 */ 0xb19cf10ca237c047UL, 0xb65466711f6c81a2UL,
--		  0xb3321bd16dd80b43UL, 0x48c14f600c5fbe8eUL,
--	/* 113 */ 0x66451c264aa6c803UL, 0xb66e3904a4fa7da6UL,
--		  0xd45f19b0b3128395UL, 0x31602627c3c9bc10UL,
--	/* 114 */ 0x3120dc4832e4e10dUL, 0xeb20c46756c717f7UL,
--		  0x00f52e3f67280294UL, 0x566d4fc14730c509UL,
--	/* 115 */ 0x7e3a5d40fd837206UL, 0xc1e926dc7159547aUL,
--		  0x216730fba68d6095UL, 0x22e8c3843f69cea7UL,
--	/* 116 */ 0x33d074e8930e4b2bUL, 0xb6e4350e84d15816UL,
--		  0x5534c26ad6ba2365UL, 0x7773c12f89f1f3f3UL,
--	/* 117 */ 0x8cba404da57962aaUL, 0x5b9897a81999ce56UL,
--		  0x508e862f121692fcUL, 0x3a81907fa093c291UL,
--	/* 118 */ 0x0dded0ff4725a510UL, 0x10d8cc10673fc503UL,
--		  0x5b9d151c9f1f4e89UL, 0x32a5c1d5cb09a44cUL,
--	/* 119 */ 0x1e0aa442b90541fbUL, 0x5f85eb7cc1b485dbUL,
--		  0xbee595ce8a9df2e5UL, 0x25e496c722422236UL,
--	/* 120 */ 0x5edf3c46cd0fe5b9UL, 0x34e75a7ed2a43388UL,
--		  0xe488de11d761e352UL, 0x0e878a01a085545cUL,
--	/* 121 */ 0xba493c77e021bb04UL, 0x2b4d1843c7df899aUL,
--		  0x9ea37a487ae80d67UL, 0x67a9958011e41794UL,
--	/* 122 */ 0x4b58051a6697b065UL, 0x47e33f7d8d6ba6d4UL,
--		  0xbb4da8d483ca46c1UL, 0x68becaa181c2db0dUL,
--	/* 123 */ 0x8d8980e90b989aa5UL, 0xf95eb14a2c93c99bUL,
--		  0x51c6c7c4796e73a2UL, 0x6e228363b5efb569UL,
--	/* 124 */ 0xc6bbc0b02dd624c8UL, 0x777eb47dec8170eeUL,
--		  0x3cde15a004cfafa9UL, 0x1dc6bc087160bf9bUL,
--	/* 125 */ 0x2e07e043eec34002UL, 0x18e9fc677a68dc7fUL,
--		  0xd8da03188bd15b9aUL, 0x48fbc3bb00568253UL,
--	/* 126 */ 0x57547d4cfb654ce1UL, 0xd3565b82a058e2adUL,
--		  0xf63eaf0bbf154478UL, 0x47531ef114dfbb18UL,
--	/* 127 */ 0xe1ec630a4278c587UL, 0x5507d546ca8e83f3UL,
--		  0x85e135c63adc0c2bUL, 0x0aa7efa85682844eUL,
--	/* 128 */ 0x72691ba8b3e1f615UL, 0x32b4e9701fbe3ffaUL,
--		  0x97b6d92e39bb7868UL, 0x2cfe53dea02e39e8UL,
--	/* 129 */ 0x687392cd85cd52b0UL, 0x27ff66c910e29831UL,
--		  0x97134556a9832d06UL, 0x269bb0360a84f8a0UL,
--	/* 130 */ 0x706e55457643f85cUL, 0x3734a48c9b597d1bUL,
--		  0x7aee91e8c6efa472UL, 0x5cd6abc198a9d9e0UL,
--	/* 131 */ 0x0e04de06cb3ce41aUL, 0xd8c6eb893402e138UL,
--		  0x904659bb686e3772UL, 0x7215c371746ba8c8UL,
--	/* 132 */ 0xfd12a97eeae4a2d9UL, 0x9514b7516394f2c5UL,
--		  0x266fd5809208f294UL, 0x5c847085619a26b9UL,
--	/* 133 */ 0x52985410fed694eaUL, 0x3c905b934a2ed254UL,
--		  0x10bb47692d3be467UL, 0x063b3d2d69e5e9e1UL,
--	/* 134 */ 0x472726eedda57debUL, 0xefb6c4ae10f41891UL,
--		  0x2b1641917b307614UL, 0x117c554fc4f45b7cUL,
--	/* 135 */ 0xc07cf3118f9d8812UL, 0x01dbd82050017939UL,
--		  0xd7e803f4171b2827UL, 0x1015e87487d225eaUL,
--	/* 136 */ 0xc58de3fed23acc4dUL, 0x50db91c294a7be2dUL,
--		  0x0b94d43d1c9cf457UL, 0x6b1640fa6e37524aUL,
--	/* 137 */ 0x692f346c5fda0d09UL, 0x200b1c59fa4d3151UL,
--		  0xb8c46f760777a296UL, 0x4b38395f3ffdfbcfUL,
--	/* 138 */ 0x18d25e00be54d671UL, 0x60d50582bec8aba6UL,
--		  0x87ad8f263b78b982UL, 0x50fdf64e9cda0432UL,
--	/* 139 */ 0x90f567aac578dcf0UL, 0xef1e9b0ef2a3133bUL,
--		  0x0eebba9242d9de71UL, 0x15473c9bf03101c7UL,
--	/* 140 */ 0x7c77e8ae56b78095UL, 0xb678e7666e6f078eUL,
--		  0x2da0b9615348ba1fUL, 0x7cf931c1ff733f0bUL,
--	/* 141 */ 0x26b357f50a0a366cUL, 0xe9708cf42b87d732UL,
--		  0xc13aeea5f91cb2c0UL, 0x35d90c991143bb4cUL,
--	/* 142 */ 0x47c1c404a9a0d9dcUL, 0x659e58451972d251UL,
--		  0x3875a8c473b38c31UL, 0x1fbd9ed379561f24UL,
--	/* 143 */ 0x11fabc6fd41ec28dUL, 0x7ef8dfe3cd2a2dcaUL,
--		  0x72e73b5d8c404595UL, 0x6135fa4954b72f27UL,
--	/* 144 */ 0xccfc32a2de24b69cUL, 0x3f55698c1f095d88UL,
--		  0xbe3350ed5ac3f929UL, 0x5e9bf806ca477eebUL,
--	/* 145 */ 0xe9ce8fb63c309f68UL, 0x5376f63565e1f9f4UL,
--		  0xd1afcfb35a6393f1UL, 0x6632a1ede5623506UL,
--	/* 146 */ 0x0b7d6c390c2ded4cUL, 0x56cb3281df04cb1fUL,
--		  0x66305a1249ecc3c7UL, 0x5d588b60a38ca72aUL,
--	/* 147 */ 0xa6ecbf78e8e5f42dUL, 0x86eeb44b3c8a3eecUL,
--		  0xec219c48fbd21604UL, 0x1aaf1af517c36731UL,
--	/* 148 */ 0xc306a2836769bde7UL, 0x208280622b1e2adbUL,
--		  0x8027f51ffbff94a6UL, 0x76cfa1ce1124f26bUL,
--	/* 149 */ 0x18eb00562422abb6UL, 0xf377c4d58f8c29c3UL,
--		  0x4dbbc207f531561aUL, 0x0253b7f082128a27UL,
--	/* 150 */ 0x3d1f091cb62c17e0UL, 0x4860e1abd64628a9UL,
--		  0x52d17436309d4253UL, 0x356f97e13efae576UL,
--	/* 151 */ 0xd351e11aa150535bUL, 0x3e6b45bb1dd878ccUL,
--		  0x0c776128bed92c98UL, 0x1d34ae93032885b8UL,
--	/* 152 */ 0x4ba0488ca85ba4c3UL, 0x985348c33c9ce6ceUL,
--		  0x66124c6f97bda770UL, 0x0f81a0290654124aUL,
--	/* 153 */ 0x9ed09ca6569b86fdUL, 0x811009fd18af9a2dUL,
--		  0xff08d03f93d8c20aUL, 0x52a148199faef26bUL,
--	/* 154 */ 0x3e03f9dc2d8d1b73UL, 0x4205801873961a70UL,
--		  0xc0d987f041a35970UL, 0x07aa1f15a1c0d549UL,
--	/* 155 */ 0xdfd46ce08cd27224UL, 0x6d0a024f934e4239UL,
--		  0x808a7a6399897b59UL, 0x0a4556e9e13d95a2UL,
--	/* 156 */ 0xd21a991fe9c13045UL, 0x9b0e8548fe7751b8UL,
--		  0x5da643cb4bf30035UL, 0x77db28d63940f721UL,
--	/* 157 */ 0xfc5eeb614adc9011UL, 0x5229419ae8c411ebUL,
--		  0x9ec3e7787d1dcf74UL, 0x340d053e216e4cb5UL,
--	/* 158 */ 0xcac7af39b48df2b4UL, 0xc0faec2871a10a94UL,
--		  0x140a69245ca575edUL, 0x0cf1c37134273a4cUL,
--	/* 159 */ 0xc8ee306ac224b8a5UL, 0x57eaee7ccb4930b0UL,
--		  0xa1e806bdaacbe74fUL, 0x7d9a62742eeb657dUL,
--	/* 160 */ 0x9eb6b6ef546c4830UL, 0x885cca1fddb36e2eUL,
--		  0xe6b9f383ef0d7105UL, 0x58654fef9d2e0412UL,
--	/* 161 */ 0xa905c4ffbe0e8e26UL, 0x942de5df9b31816eUL,
--		  0x497d723f802e88e1UL, 0x30684dea602f408dUL,
--	/* 162 */ 0x21e5a278a3e6cb34UL, 0xaefb6e6f5b151dc4UL,
--		  0xb30b8e049d77ca15UL, 0x28c3c9cf53b98981UL,
--	/* 163 */ 0x287fb721556cdd2aUL, 0x0d317ca897022274UL,
--		  0x7468c7423a543258UL, 0x4a7f11464eb5642fUL,
--	/* 164 */ 0xa237a4774d193aa6UL, 0xd865986ea92129a1UL,
--		  0x24c515ecf87c1a88UL, 0x604003575f39f5ebUL,
--	/* 165 */ 0x47b9f189570a9b27UL, 0x2b98cede465e4b78UL,
--		  0x026df551dbb85c20UL, 0x74fcd91047e21901UL,
--	/* 166 */ 0x13e2a90a23c1bfa3UL, 0x0cb0074e478519f6UL,
--		  0x5ff1cbbe3af6cf44UL, 0x67fe5438be812dbeUL,
--	/* 167 */ 0xd13cf64fa40f05b0UL, 0x054dfb2f32283787UL,
--		  0x4173915b7f0d2aeaUL, 0x482f144f1f610d4eUL,
--	/* 168 */ 0xf6210201b47f8234UL, 0x5d0ae1929e70b990UL,
--		  0xdcd7f455b049567cUL, 0x7e93d0f1f0916f01UL,
--	/* 169 */ 0xdd79cbf18a7db4faUL, 0xbe8391bf6f74c62fUL,
--		  0x027145d14b8291bdUL, 0x585a73ea2cbf1705UL,
--	/* 170 */ 0x485ca03e928a0db2UL, 0x10fc01a5742857e7UL,
--		  0x2f482edbd6d551a7UL, 0x0f0433b5048fdb8aUL,
--	/* 171 */ 0x60da2e8dd7dc6247UL, 0x88b4c9d38cd4819aUL,
--		  0x13033ac001f66697UL, 0x273b24fe3b367d75UL,
--	/* 172 */ 0xc6e8f66a31b3b9d4UL, 0x281514a494df49d5UL,
--		  0xd1726fdfc8b23da7UL, 0x4b3ae7d103dee548UL,
--	/* 173 */ 0xc6256e19ce4b9d7eUL, 0xff5c5cf186e3c61cUL,
--		  0xacc63ca34b8ec145UL, 0x74621888fee66574UL,
--	/* 174 */ 0x956f409645290a1eUL, 0xef0bf8e3263a962eUL,
--		  0xed6a50eb5ec2647bUL, 0x0694283a9dca7502UL,
--	/* 175 */ 0x769b963643a2dcd1UL, 0x42b7c8ea09fc5353UL,
--		  0x4f002aee13397eabUL, 0x63005e2c19b7d63aUL,
--	/* 176 */ 0xca6736da63023beaUL, 0x966c7f6db12a99b7UL,
--		  0xace09390c537c5e1UL, 0x0b696063a1aa89eeUL,
--	/* 177 */ 0xebb03e97288c56e5UL, 0x432a9f9f938c8be8UL,
--		  0xa6a5a93d5b717f71UL, 0x1a5fb4c3e18f9d97UL,
--	/* 178 */ 0x1c94e7ad1c60cdceUL, 0xee202a43fc02c4a0UL,
--		  0x8dafe4d867c46a20UL, 0x0a10263c8ac27b58UL,
--	/* 179 */ 0xd0dea9dfe4432a4aUL, 0x856af87bbe9277c5UL,
--		  0xce8472acc212c71aUL, 0x6f151b6d9bbb1e91UL,
--	/* 180 */ 0x26776c527ceed56aUL, 0x7d211cb7fbf8faecUL,
--		  0x37ae66a6fd4609ccUL, 0x1f81b702d2770c42UL,
--	/* 181 */ 0x2fb0b057eac58392UL, 0xe1dd89fe29744e9dUL,
--		  0xc964f8eb17beb4f8UL, 0x29571073c9a2d41eUL,
--	/* 182 */ 0xa948a18981c0e254UL, 0x2df6369b65b22830UL,
--		  0xa33eb2d75fcfd3c6UL, 0x078cd6ec4199a01fUL,
--	/* 183 */ 0x4a584a41ad900d2fUL, 0x32142b78e2c74c52UL,
--		  0x68c4e8338431c978UL, 0x7f69ea9008689fc2UL,
--	/* 184 */ 0x52f2c81e46a38265UL, 0xfd78072d04a832fdUL,
--		  0x8cd7d5fa25359e94UL, 0x4de71b7454cc29d2UL,
--	/* 185 */ 0x42eb60ad1eda6ac9UL, 0x0aad37dfdbc09c3aUL,
--		  0x81004b71e33cc191UL, 0x44e6be345122803cUL,
--	/* 186 */ 0x03fe8388ba1920dbUL, 0xf5d57c32150db008UL,
--		  0x49c8c4281af60c29UL, 0x21edb518de701aeeUL,
--	/* 187 */ 0x7fb63e418f06dc99UL, 0xa4460d99c166d7b8UL,
--		  0x24dd5248ce520a83UL, 0x5ec3ad712b928358UL,
--	/* 188 */ 0x15022a5fbd17930fUL, 0xa4f64a77d82570e3UL,
--		  0x12bc8d6915783712UL, 0x498194c0fc620abbUL,
--	/* 189 */ 0x38a2d9d255686c82UL, 0x785c6bd9193e21f0UL,
--		  0xe4d5c81ab24a5484UL, 0x56307860b2e20989UL,
--	/* 190 */ 0x429d55f78b4d74c4UL, 0x22f1834643350131UL,
--		  0x1e60c24598c71fffUL, 0x59f2f014979983efUL,
--	/* 191 */ 0x46a47d56eb494a44UL, 0x3e22a854d636a18eUL,
--		  0xb346e15274491c3bUL, 0x2ceafd4e5390cde7UL,
--	/* 192 */ 0xba8a8538be0d6675UL, 0x4b9074bb50818e23UL,
--		  0xcbdab89085d304c3UL, 0x61a24fe0e56192c4UL,
--	/* 193 */ 0xcb7615e6db525bcbUL, 0xdd7d8c35a567e4caUL,
--		  0xe6b4153acafcdd69UL, 0x2d668e097f3c9766UL,
--	/* 194 */ 0xa57e7e265ce55ef0UL, 0x5d9f4e527cd4b967UL,
--		  0xfbc83606492fd1e5UL, 0x090d52beb7c3f7aeUL,
--	/* 195 */ 0x09b9515a1e7b4d7cUL, 0x1f266a2599da44c0UL,
--		  0xa1c49548e2c55504UL, 0x7ef04287126f15ccUL,
--	/* 196 */ 0xfed1659dbd30ef15UL, 0x8b4ab9eec4e0277bUL,
--		  0x884d6236a5df3291UL, 0x1fd96ea6bf5cf788UL,
--	/* 197 */ 0x42a161981f190d9aUL, 0x61d849507e6052c1UL,
--		  0x9fe113bf285a2cd5UL, 0x7c22d676dbad85d8UL,
--	/* 198 */ 0x82e770ed2bfbd27dUL, 0x4c05b2ece996f5a5UL,
--		  0xcd40a9c2b0900150UL, 0x5895319213d9bf64UL,
--	/* 199 */ 0xe7cc5d703fea2e08UL, 0xb50c491258e2188cUL,
--		  0xcce30baa48205bf0UL, 0x537c659ccfa32d62UL,
--	/* 200 */ 0x37b6623a98cfc088UL, 0xfe9bed1fa4d6aca4UL,
--		  0x04d29b8e56a8d1b0UL, 0x725f71c40b519575UL,
--	/* 201 */ 0x28c7f89cd0339ce6UL, 0x8367b14469ddc18bUL,
--		  0x883ada83a6a1652cUL, 0x585f1974034d6c17UL,
--	/* 202 */ 0x89cfb266f1b19188UL, 0xe63b4863e7c35217UL,
--		  0xd88c9da6b4c0526aUL, 0x3e035c9df0954635UL,
--	/* 203 */ 0xdd9d5412fb45de9dUL, 0xdd684532e4cff40dUL,
--		  0x4b5c999b151d671cUL, 0x2d8c2cc811e7f690UL,
--	/* 204 */ 0x7f54be1d90055d40UL, 0xa464c5df464aaf40UL,
--		  0x33979624f0e917beUL, 0x2c018dc527356b30UL,
--	/* 205 */ 0xa5415024e330b3d4UL, 0x73ff3d96691652d3UL,
--		  0x94ec42c4ef9b59f1UL, 0x0747201618d08e5aUL,
--	/* 206 */ 0x4d6ca48aca411c53UL, 0x66415f2fcfa66119UL,
--		  0x9c4dd40051e227ffUL, 0x59810bc09a02f7ebUL,
--	/* 207 */ 0x2a7eb171b3dc101dUL, 0x441c5ab99ffef68eUL,
--		  0x32025c9b93b359eaUL, 0x5e8ce0a71e9d112fUL,
--	/* 208 */ 0xbfcccb92429503fdUL, 0xd271ba752f095d55UL,
--		  0x345ead5e972d091eUL, 0x18c8df11a83103baUL,
--	/* 209 */ 0x90cd949a9aed0f4cUL, 0xc5d1f4cb6660e37eUL,
--		  0xb8cac52d56c52e0bUL, 0x6e42e400c5808e0dUL,
--	/* 210 */ 0xa3b46966eeaefd23UL, 0x0c4f1f0be39ecdcaUL,
--		  0x189dc8c9d683a51dUL, 0x51f27f054c09351bUL,
--	/* 211 */ 0x4c487ccd2a320682UL, 0x587ea95bb3df1c96UL,
--		  0xc8ccf79e555cb8e8UL, 0x547dc829a206d73dUL,
--	/* 212 */ 0xb822a6cd80c39b06UL, 0xe96d54732000d4c6UL,
--		  0x28535b6f91463b4dUL, 0x228f4660e2486e1dUL,
--	/* 213 */ 0x98799538de8d3abfUL, 0x8cd8330045ebca6eUL,
--		  0x79952a008221e738UL, 0x4322e1a7535cd2bbUL,
--	/* 214 */ 0xb114c11819d1801cUL, 0x2016e4d84f3f5ec7UL,
--		  0xdd0e2df409260f4cUL, 0x5ec362c0ae5f7266UL,
--	/* 215 */ 0xc0462b18b8b2b4eeUL, 0x7cc8d950274d1afbUL,
--		  0xf25f7105436b02d2UL, 0x43bbf8dcbff9ccd3UL,
--	/* 216 */ 0xb6ad1767a039e9dfUL, 0xb0714da8f69d3583UL,
--		  0x5e55fa18b42931f5UL, 0x4ed5558f33c60961UL,
--	/* 217 */ 0x1fe37901c647a5ddUL, 0x593ddf1f8081d357UL,
--		  0x0249a4fd813fd7a6UL, 0x69acca274e9caf61UL,
--	/* 218 */ 0x047ba3ea330721c9UL, 0x83423fc20e7e1ea0UL,
--		  0x1df4c0af01314a60UL, 0x09a62dab89289527UL,
--	/* 219 */ 0xa5b325a49cc6cb00UL, 0xe94b5dc654b56cb6UL,
--		  0x3be28779adc994a0UL, 0x4296e8f8ba3a4aadUL,
--	/* 220 */ 0x328689761e451eabUL, 0x2e4d598bff59594aUL,
--		  0x49b96853d7a7084aUL, 0x4980a319601420a8UL,
--	/* 221 */ 0x9565b9e12f552c42UL, 0x8a5318db7100fe96UL,
--		  0x05c90b4d43add0d7UL, 0x538b4cd66a5d4edaUL,
--	/* 222 */ 0xf4e94fc3e89f039fUL, 0x592c9af26f618045UL,
--		  0x08a36eb5fd4b9550UL, 0x25fffaf6c2ed1419UL,
--	/* 223 */ 0x34434459cc79d354UL, 0xeeecbfb4b1d5476bUL,
--		  0xddeb34a061615d99UL, 0x5129cecceb64b773UL,
--	/* 224 */ 0xee43215894993520UL, 0x772f9c7cf14c0b3bUL,
--		  0xd2e2fce306bedad5UL, 0x715f42b546f06a97UL,
--	/* 225 */ 0x434ecdceda5b5f1aUL, 0x0da17115a49741a9UL,
--		  0x680bd77c73edad2eUL, 0x487c02354edd9041UL,
--	/* 226 */ 0xb8efeff3a70ed9c4UL, 0x56a32aa3e857e302UL,
--		  0xdf3a68bd48a2a5a0UL, 0x07f650b73176c444UL,
--	/* 227 */ 0xe38b9b1626e0ccb1UL, 0x79e053c18b09fb36UL,
--		  0x56d90319c9f94964UL, 0x1ca941e7ac9ff5c4UL,
--	/* 228 */ 0x49c4df29162fa0bbUL, 0x8488cf3282b33305UL,
--		  0x95dfda14cabb437dUL, 0x3391f78264d5ad86UL,
--	/* 229 */ 0x729ae06ae2b5095dUL, 0xd58a58d73259a946UL,
--		  0xe9834262d13921edUL, 0x27fedafaa54bb592UL,
--	/* 230 */ 0xa99dc5b829ad48bbUL, 0x5f025742499ee260UL,
--		  0x802c8ecd5d7513fdUL, 0x78ceb3ef3f6dd938UL,
--	/* 231 */ 0xc342f44f8a135d94UL, 0x7b9edb44828cdda3UL,
--		  0x9436d11a0537cfe7UL, 0x5064b164ec1ab4c8UL,
--	/* 232 */ 0x7020eccfd37eb2fcUL, 0x1f31ea3ed90d25fcUL,
--		  0x1b930d7bdfa1bb34UL, 0x5344467a48113044UL,
--	/* 233 */ 0x70073170f25e6dfbUL, 0xe385dc1a50114cc8UL,
--		  0x2348698ac8fc4f00UL, 0x2a77a55284dd40d8UL,
--	/* 234 */ 0xfe06afe0c98c6ce4UL, 0xc235df96dddfd6e4UL,
--		  0x1428d01e33bf1ed3UL, 0x785768ec9300bdafUL,
--	/* 235 */ 0x9702e57a91deb63bUL, 0x61bdb8bfe5ce8b80UL,
--		  0x645b426f3d1d58acUL, 0x4804a82227a557bcUL,
--	/* 236 */ 0x8e57048ab44d2601UL, 0x68d6501a4b3a6935UL,
--		  0xc39c9ec3f9e1c293UL, 0x4172f257d4de63e2UL,
--	/* 237 */ 0xd368b450330c6401UL, 0x040d3017418f2391UL,
--		  0x2c34bb6090b7d90dUL, 0x16f649228fdfd51fUL,
--	/* 238 */ 0xbea6818e2b928ef5UL, 0xe28ccf91cdc11e72UL,
--		  0x594aaa68e77a36cdUL, 0x313034806c7ffd0fUL,
--	/* 239 */ 0x8a9d27ac2249bd65UL, 0x19a3b464018e9512UL,
--		  0xc26ccff352b37ec7UL, 0x056f68341d797b21UL,
--	/* 240 */ 0x5e79d6757efd2327UL, 0xfabdbcb6553afe15UL,
--		  0xd3e7222c6eaf5a60UL, 0x7046c76d4dae743bUL,
--	/* 241 */ 0x660be872b18d4a55UL, 0x19992518574e1496UL,
--		  0xc103053a302bdcbbUL, 0x3ed8e9800b218e8eUL,
--	/* 242 */ 0x7b0b9239fa75e03eUL, 0xefe9fb684633c083UL,
--		  0x98a35fbe391a7793UL, 0x6065510fe2d0fe34UL,
--	/* 243 */ 0x55cb668548abad0cUL, 0xb4584548da87e527UL,
--		  0x2c43ecea0107c1ddUL, 0x526028809372de35UL,
--	/* 244 */ 0x3415c56af9213b1fUL, 0x5bee1a4d017e98dbUL,
--		  0x13f6b105b5cf709bUL, 0x5ff20e3482b29ab6UL,
--	/* 245 */ 0x0aa29c75cc2e6c90UL, 0xfc7d73ca3a70e206UL,
--		  0x899fc38fc4b5c515UL, 0x250386b124ffc207UL,
--	/* 246 */ 0x54ea28d5ae3d2b56UL, 0x9913149dd6de60ceUL,
--		  0x16694fc58f06d6c1UL, 0x46b23975eb018fc7UL,
--	/* 247 */ 0x470a6a0fb4b7b4e2UL, 0x5d92475a8f7253deUL,
--		  0xabeee5b52fbd3adbUL, 0x7fa20801a0806968UL,
--	/* 248 */ 0x76f3faf19f7714d2UL, 0xb3e840c12f4660c3UL,
--		  0x0fb4cd8df212744eUL, 0x4b065a251d3a2dd2UL,
--	/* 249 */ 0x5cebde383d77cd4aUL, 0x6adf39df882c9cb1UL,
--		  0xa2dd242eb09af759UL, 0x3147c0e50e5f6422UL,
--	/* 250 */ 0x164ca5101d1350dbUL, 0xf8d13479c33fc962UL,
--		  0xe640ce4d13e5da08UL, 0x4bdee0c45061f8baUL,
--	/* 251 */ 0xd7c46dc1a4edb1c9UL, 0x5514d7b6437fd98aUL,
--		  0x58942f6bb2a1c00bUL, 0x2dffb2ab1d70710eUL,
--	/* 252 */ 0xccdfcf2fc18b6d68UL, 0xa8ebcba8b7806167UL,
--		  0x980697f95e2937e3UL, 0x02fbba1cd0126e8cUL
--};
--
--/* c is two 512-bit products: c0[0:7]=a0[0:3]*b0[0:3] and c1[8:15]=a1[4:7]*b1[4:7]
-- * a is two 256-bit integers: a0[0:3] and a1[4:7]
-- * b is two 256-bit integers: b0[0:3] and b1[4:7]
-- */
--static void mul2_256x256_integer_adx(u64 *const c, const u64 *const a,
--				     const u64 *const b)
--{
--	asm volatile(
--		"xorl %%r14d, %%r14d ;"
--		"movq   (%1), %%rdx; "	/* A[0] */
--		"mulx   (%2),  %%r8, %%r15; " /* A[0]*B[0] */
--		"xorl %%r10d, %%r10d ;"
--		"movq %%r8, (%0) ;"
--		"mulx  8(%2), %%r10, %%rax; " /* A[0]*B[1] */
--		"adox %%r10, %%r15 ;"
--		"mulx 16(%2),  %%r8, %%rbx; " /* A[0]*B[2] */
--		"adox  %%r8, %%rax ;"
--		"mulx 24(%2), %%r10, %%rcx; " /* A[0]*B[3] */
--		"adox %%r10, %%rbx ;"
--		/******************************************/
--		"adox %%r14, %%rcx ;"
--
--		"movq  8(%1), %%rdx; "	/* A[1] */
--		"mulx   (%2),  %%r8,  %%r9; " /* A[1]*B[0] */
--		"adox %%r15,  %%r8 ;"
--		"movq  %%r8, 8(%0) ;"
--		"mulx  8(%2), %%r10, %%r11; " /* A[1]*B[1] */
--		"adox %%r10,  %%r9 ;"
--		"adcx  %%r9, %%rax ;"
--		"mulx 16(%2),  %%r8, %%r13; " /* A[1]*B[2] */
--		"adox  %%r8, %%r11 ;"
--		"adcx %%r11, %%rbx ;"
--		"mulx 24(%2), %%r10, %%r15; " /* A[1]*B[3] */
--		"adox %%r10, %%r13 ;"
--		"adcx %%r13, %%rcx ;"
--		/******************************************/
--		"adox %%r14, %%r15 ;"
--		"adcx %%r14, %%r15 ;"
--
--		"movq 16(%1), %%rdx; " /* A[2] */
--		"xorl %%r10d, %%r10d ;"
--		"mulx   (%2),  %%r8,  %%r9; " /* A[2]*B[0] */
--		"adox %%rax,  %%r8 ;"
--		"movq %%r8, 16(%0) ;"
--		"mulx  8(%2), %%r10, %%r11; " /* A[2]*B[1] */
--		"adox %%r10,  %%r9 ;"
--		"adcx  %%r9, %%rbx ;"
--		"mulx 16(%2),  %%r8, %%r13; " /* A[2]*B[2] */
--		"adox  %%r8, %%r11 ;"
--		"adcx %%r11, %%rcx ;"
--		"mulx 24(%2), %%r10, %%rax; " /* A[2]*B[3] */
--		"adox %%r10, %%r13 ;"
--		"adcx %%r13, %%r15 ;"
--		/******************************************/
--		"adox %%r14, %%rax ;"
--		"adcx %%r14, %%rax ;"
--
--		"movq 24(%1), %%rdx; " /* A[3] */
--		"xorl %%r10d, %%r10d ;"
--		"mulx   (%2),  %%r8,  %%r9; " /* A[3]*B[0] */
--		"adox %%rbx,  %%r8 ;"
--		"movq %%r8, 24(%0) ;"
--		"mulx  8(%2), %%r10, %%r11; " /* A[3]*B[1] */
--		"adox %%r10,  %%r9 ;"
--		"adcx  %%r9, %%rcx ;"
--		"movq %%rcx, 32(%0) ;"
--		"mulx 16(%2),  %%r8, %%r13; " /* A[3]*B[2] */
--		"adox  %%r8, %%r11 ;"
--		"adcx %%r11, %%r15 ;"
--		"movq %%r15, 40(%0) ;"
--		"mulx 24(%2), %%r10, %%rbx; " /* A[3]*B[3] */
--		"adox %%r10, %%r13 ;"
--		"adcx %%r13, %%rax ;"
--		"movq %%rax, 48(%0) ;"
--		/******************************************/
--		"adox %%r14, %%rbx ;"
--		"adcx %%r14, %%rbx ;"
--		"movq %%rbx, 56(%0) ;"
--
--		"movq 32(%1), %%rdx; "	/* C[0] */
--		"mulx 32(%2),  %%r8, %%r15; " /* C[0]*D[0] */
--		"xorl %%r10d, %%r10d ;"
--		"movq %%r8, 64(%0);"
--		"mulx 40(%2), %%r10, %%rax; " /* C[0]*D[1] */
--		"adox %%r10, %%r15 ;"
--		"mulx 48(%2),  %%r8, %%rbx; " /* C[0]*D[2] */
--		"adox  %%r8, %%rax ;"
--		"mulx 56(%2), %%r10, %%rcx; " /* C[0]*D[3] */
--		"adox %%r10, %%rbx ;"
--		/******************************************/
--		"adox %%r14, %%rcx ;"
--
--		"movq 40(%1), %%rdx; " /* C[1] */
--		"xorl %%r10d, %%r10d ;"
--		"mulx 32(%2),  %%r8,  %%r9; " /* C[1]*D[0] */
--		"adox %%r15,  %%r8 ;"
--		"movq  %%r8, 72(%0);"
--		"mulx 40(%2), %%r10, %%r11; " /* C[1]*D[1] */
--		"adox %%r10,  %%r9 ;"
--		"adcx  %%r9, %%rax ;"
--		"mulx 48(%2),  %%r8, %%r13; " /* C[1]*D[2] */
--		"adox  %%r8, %%r11 ;"
--		"adcx %%r11, %%rbx ;"
--		"mulx 56(%2), %%r10, %%r15; " /* C[1]*D[3] */
--		"adox %%r10, %%r13 ;"
--		"adcx %%r13, %%rcx ;"
--		/******************************************/
--		"adox %%r14, %%r15 ;"
--		"adcx %%r14, %%r15 ;"
--
--		"movq 48(%1), %%rdx; " /* C[2] */
--		"xorl %%r10d, %%r10d ;"
--		"mulx 32(%2),  %%r8,  %%r9; " /* C[2]*D[0] */
--		"adox %%rax,  %%r8 ;"
--		"movq  %%r8, 80(%0);"
--		"mulx 40(%2), %%r10, %%r11; " /* C[2]*D[1] */
--		"adox %%r10,  %%r9 ;"
--		"adcx  %%r9, %%rbx ;"
--		"mulx 48(%2),  %%r8, %%r13; " /* C[2]*D[2] */
--		"adox  %%r8, %%r11 ;"
--		"adcx %%r11, %%rcx ;"
--		"mulx 56(%2), %%r10, %%rax; " /* C[2]*D[3] */
--		"adox %%r10, %%r13 ;"
--		"adcx %%r13, %%r15 ;"
--		/******************************************/
--		"adox %%r14, %%rax ;"
--		"adcx %%r14, %%rax ;"
--
--		"movq 56(%1), %%rdx; " /* C[3] */
--		"xorl %%r10d, %%r10d ;"
--		"mulx 32(%2),  %%r8,  %%r9; " /* C[3]*D[0] */
--		"adox %%rbx,  %%r8 ;"
--		"movq  %%r8, 88(%0);"
--		"mulx 40(%2), %%r10, %%r11; " /* C[3]*D[1] */
--		"adox %%r10,  %%r9 ;"
--		"adcx  %%r9, %%rcx ;"
--		"movq %%rcx,  96(%0) ;"
--		"mulx 48(%2),  %%r8, %%r13; " /* C[3]*D[2] */
--		"adox  %%r8, %%r11 ;"
--		"adcx %%r11, %%r15 ;"
--		"movq %%r15, 104(%0) ;"
--		"mulx 56(%2), %%r10, %%rbx; " /* C[3]*D[3] */
--		"adox %%r10, %%r13 ;"
--		"adcx %%r13, %%rax ;"
--		"movq %%rax, 112(%0) ;"
--		/******************************************/
--		"adox %%r14, %%rbx ;"
--		"adcx %%r14, %%rbx ;"
--		"movq %%rbx, 120(%0) ;"
--		:
--		: "r"(c), "r"(a), "r"(b)
--		: "memory", "cc", "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9",
--		  "%r10", "%r11", "%r13", "%r14", "%r15");
--}
--
--static void mul2_256x256_integer_bmi2(u64 *const c, const u64 *const a,
--				      const u64 *const b)
-+static __always_inline u64 eq_mask(u64 a, u64 b)
- {
--	asm volatile(
--		"movq   (%1), %%rdx; "	/* A[0] */
--		"mulx   (%2),  %%r8, %%r15; " /* A[0]*B[0] */
--		"movq %%r8,  (%0) ;"
--		"mulx  8(%2), %%r10, %%rax; " /* A[0]*B[1] */
--		"addq %%r10, %%r15 ;"
--		"mulx 16(%2),  %%r8, %%rbx; " /* A[0]*B[2] */
--		"adcq  %%r8, %%rax ;"
--		"mulx 24(%2), %%r10, %%rcx; " /* A[0]*B[3] */
--		"adcq %%r10, %%rbx ;"
--		/******************************************/
--		"adcq    $0, %%rcx ;"
--
--		"movq  8(%1), %%rdx; "	/* A[1] */
--		"mulx   (%2),  %%r8,  %%r9; " /* A[1]*B[0] */
--		"addq %%r15,  %%r8 ;"
--		"movq %%r8, 8(%0) ;"
--		"mulx  8(%2), %%r10, %%r11; " /* A[1]*B[1] */
--		"adcq %%r10,  %%r9 ;"
--		"mulx 16(%2),  %%r8, %%r13; " /* A[1]*B[2] */
--		"adcq  %%r8, %%r11 ;"
--		"mulx 24(%2), %%r10, %%r15; " /* A[1]*B[3] */
--		"adcq %%r10, %%r13 ;"
--		/******************************************/
--		"adcq    $0, %%r15 ;"
--
--		"addq  %%r9, %%rax ;"
--		"adcq %%r11, %%rbx ;"
--		"adcq %%r13, %%rcx ;"
--		"adcq    $0, %%r15 ;"
--
--		"movq 16(%1), %%rdx; "	/* A[2] */
--		"mulx   (%2),  %%r8,  %%r9; " /* A[2]*B[0] */
--		"addq %%rax,  %%r8 ;"
--		"movq %%r8, 16(%0) ;"
--		"mulx  8(%2), %%r10, %%r11; " /* A[2]*B[1] */
--		"adcq %%r10,  %%r9 ;"
--		"mulx 16(%2),  %%r8, %%r13; " /* A[2]*B[2] */
--		"adcq  %%r8, %%r11 ;"
--		"mulx 24(%2), %%r10, %%rax; " /* A[2]*B[3] */
--		"adcq %%r10, %%r13 ;"
--		/******************************************/
--		"adcq    $0, %%rax ;"
--
--		"addq  %%r9, %%rbx ;"
--		"adcq %%r11, %%rcx ;"
--		"adcq %%r13, %%r15 ;"
--		"adcq    $0, %%rax ;"
--
--		"movq 24(%1), %%rdx; "	/* A[3] */
--		"mulx   (%2),  %%r8,  %%r9; " /* A[3]*B[0] */
--		"addq %%rbx,  %%r8 ;"
--		"movq %%r8, 24(%0) ;"
--		"mulx  8(%2), %%r10, %%r11; " /* A[3]*B[1] */
--		"adcq %%r10,  %%r9 ;"
--		"mulx 16(%2),  %%r8, %%r13; " /* A[3]*B[2] */
--		"adcq  %%r8, %%r11 ;"
--		"mulx 24(%2), %%r10, %%rbx; " /* A[3]*B[3] */
--		"adcq %%r10, %%r13 ;"
--		/******************************************/
--		"adcq    $0, %%rbx ;"
--
--		"addq  %%r9, %%rcx ;"
--		"movq %%rcx, 32(%0) ;"
--		"adcq %%r11, %%r15 ;"
--		"movq %%r15, 40(%0) ;"
--		"adcq %%r13, %%rax ;"
--		"movq %%rax, 48(%0) ;"
--		"adcq    $0, %%rbx ;"
--		"movq %%rbx, 56(%0) ;"
--
--		"movq 32(%1), %%rdx; "	/* C[0] */
--		"mulx 32(%2),  %%r8, %%r15; " /* C[0]*D[0] */
--		"movq %%r8, 64(%0) ;"
--		"mulx 40(%2), %%r10, %%rax; " /* C[0]*D[1] */
--		"addq %%r10, %%r15 ;"
--		"mulx 48(%2),  %%r8, %%rbx; " /* C[0]*D[2] */
--		"adcq  %%r8, %%rax ;"
--		"mulx 56(%2), %%r10, %%rcx; " /* C[0]*D[3] */
--		"adcq %%r10, %%rbx ;"
--		/******************************************/
--		"adcq    $0, %%rcx ;"
--
--		"movq 40(%1), %%rdx; "	/* C[1] */
--		"mulx 32(%2),  %%r8,  %%r9; " /* C[1]*D[0] */
--		"addq %%r15,  %%r8 ;"
--		"movq %%r8, 72(%0) ;"
--		"mulx 40(%2), %%r10, %%r11; " /* C[1]*D[1] */
--		"adcq %%r10,  %%r9 ;"
--		"mulx 48(%2),  %%r8, %%r13; " /* C[1]*D[2] */
--		"adcq  %%r8, %%r11 ;"
--		"mulx 56(%2), %%r10, %%r15; " /* C[1]*D[3] */
--		"adcq %%r10, %%r13 ;"
--		/******************************************/
--		"adcq    $0, %%r15 ;"
--
--		"addq  %%r9, %%rax ;"
--		"adcq %%r11, %%rbx ;"
--		"adcq %%r13, %%rcx ;"
--		"adcq    $0, %%r15 ;"
--
--		"movq 48(%1), %%rdx; "	/* C[2] */
--		"mulx 32(%2),  %%r8,  %%r9; " /* C[2]*D[0] */
--		"addq %%rax,  %%r8 ;"
--		"movq %%r8, 80(%0) ;"
--		"mulx 40(%2), %%r10, %%r11; " /* C[2]*D[1] */
--		"adcq %%r10,  %%r9 ;"
--		"mulx 48(%2),  %%r8, %%r13; " /* C[2]*D[2] */
--		"adcq  %%r8, %%r11 ;"
--		"mulx 56(%2), %%r10, %%rax; " /* C[2]*D[3] */
--		"adcq %%r10, %%r13 ;"
--		/******************************************/
--		"adcq    $0, %%rax ;"
--
--		"addq  %%r9, %%rbx ;"
--		"adcq %%r11, %%rcx ;"
--		"adcq %%r13, %%r15 ;"
--		"adcq    $0, %%rax ;"
--
--		"movq 56(%1), %%rdx; "	/* C[3] */
--		"mulx 32(%2),  %%r8,  %%r9; " /* C[3]*D[0] */
--		"addq %%rbx,  %%r8 ;"
--		"movq %%r8, 88(%0) ;"
--		"mulx 40(%2), %%r10, %%r11; " /* C[3]*D[1] */
--		"adcq %%r10,  %%r9 ;"
--		"mulx 48(%2),  %%r8, %%r13; " /* C[3]*D[2] */
--		"adcq  %%r8, %%r11 ;"
--		"mulx 56(%2), %%r10, %%rbx; " /* C[3]*D[3] */
--		"adcq %%r10, %%r13 ;"
--		/******************************************/
--		"adcq    $0, %%rbx ;"
--
--		"addq  %%r9, %%rcx ;"
--		"movq %%rcx,  96(%0) ;"
--		"adcq %%r11, %%r15 ;"
--		"movq %%r15, 104(%0) ;"
--		"adcq %%r13, %%rax ;"
--		"movq %%rax, 112(%0) ;"
--		"adcq    $0, %%rbx ;"
--		"movq %%rbx, 120(%0) ;"
--		:
--		: "r"(c), "r"(a), "r"(b)
--		: "memory", "cc", "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9",
--		  "%r10", "%r11", "%r13", "%r15");
-+	u64 x = a ^ b;
-+	u64 minus_x = ~x + (u64)1U;
-+	u64 x_or_minus_x = x | minus_x;
-+	u64 xnx = x_or_minus_x >> (u32)63U;
-+	return xnx - (u64)1U;
- }
- 
--static void sqr2_256x256_integer_adx(u64 *const c, const u64 *const a)
-+static __always_inline u64 gte_mask(u64 a, u64 b)
- {
--	asm volatile(
--		"movq   (%1), %%rdx        ;" /* A[0]      */
--		"mulx  8(%1),  %%r8, %%r14 ;" /* A[1]*A[0] */
--		"xorl %%r15d, %%r15d;"
--		"mulx 16(%1),  %%r9, %%r10 ;" /* A[2]*A[0] */
--		"adcx %%r14,  %%r9 ;"
--		"mulx 24(%1), %%rax, %%rcx ;" /* A[3]*A[0] */
--		"adcx %%rax, %%r10 ;"
--		"movq 24(%1), %%rdx        ;" /* A[3]      */
--		"mulx  8(%1), %%r11, %%rbx ;" /* A[1]*A[3] */
--		"adcx %%rcx, %%r11 ;"
--		"mulx 16(%1), %%rax, %%r13 ;" /* A[2]*A[3] */
--		"adcx %%rax, %%rbx ;"
--		"movq  8(%1), %%rdx        ;" /* A[1]      */
--		"adcx %%r15, %%r13 ;"
--		"mulx 16(%1), %%rax, %%rcx ;" /* A[2]*A[1] */
--		"movq    $0, %%r14 ;"
--		/******************************************/
--		"adcx %%r15, %%r14 ;"
--
--		"xorl %%r15d, %%r15d;"
--		"adox %%rax, %%r10 ;"
--		"adcx  %%r8,  %%r8 ;"
--		"adox %%rcx, %%r11 ;"
--		"adcx  %%r9,  %%r9 ;"
--		"adox %%r15, %%rbx ;"
--		"adcx %%r10, %%r10 ;"
--		"adox %%r15, %%r13 ;"
--		"adcx %%r11, %%r11 ;"
--		"adox %%r15, %%r14 ;"
--		"adcx %%rbx, %%rbx ;"
--		"adcx %%r13, %%r13 ;"
--		"adcx %%r14, %%r14 ;"
--
--		"movq   (%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ;" /* A[0]^2 */
--		/*******************/
--		"movq %%rax,  0(%0) ;"
--		"addq %%rcx,  %%r8 ;"
--		"movq  %%r8,  8(%0) ;"
--		"movq  8(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ;" /* A[1]^2 */
--		"adcq %%rax,  %%r9 ;"
--		"movq  %%r9, 16(%0) ;"
--		"adcq %%rcx, %%r10 ;"
--		"movq %%r10, 24(%0) ;"
--		"movq 16(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ;" /* A[2]^2 */
--		"adcq %%rax, %%r11 ;"
--		"movq %%r11, 32(%0) ;"
--		"adcq %%rcx, %%rbx ;"
--		"movq %%rbx, 40(%0) ;"
--		"movq 24(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ;" /* A[3]^2 */
--		"adcq %%rax, %%r13 ;"
--		"movq %%r13, 48(%0) ;"
--		"adcq %%rcx, %%r14 ;"
--		"movq %%r14, 56(%0) ;"
--
--
--		"movq 32(%1), %%rdx        ;" /* B[0]      */
--		"mulx 40(%1),  %%r8, %%r14 ;" /* B[1]*B[0] */
--		"xorl %%r15d, %%r15d;"
--		"mulx 48(%1),  %%r9, %%r10 ;" /* B[2]*B[0] */
--		"adcx %%r14,  %%r9 ;"
--		"mulx 56(%1), %%rax, %%rcx ;" /* B[3]*B[0] */
--		"adcx %%rax, %%r10 ;"
--		"movq 56(%1), %%rdx        ;" /* B[3]      */
--		"mulx 40(%1), %%r11, %%rbx ;" /* B[1]*B[3] */
--		"adcx %%rcx, %%r11 ;"
--		"mulx 48(%1), %%rax, %%r13 ;" /* B[2]*B[3] */
--		"adcx %%rax, %%rbx ;"
--		"movq 40(%1), %%rdx        ;" /* B[1]      */
--		"adcx %%r15, %%r13 ;"
--		"mulx 48(%1), %%rax, %%rcx ;" /* B[2]*B[1] */
--		"movq    $0, %%r14 ;"
--		/******************************************/
--		"adcx %%r15, %%r14 ;"
--
--		"xorl %%r15d, %%r15d;"
--		"adox %%rax, %%r10 ;"
--		"adcx  %%r8,  %%r8 ;"
--		"adox %%rcx, %%r11 ;"
--		"adcx  %%r9,  %%r9 ;"
--		"adox %%r15, %%rbx ;"
--		"adcx %%r10, %%r10 ;"
--		"adox %%r15, %%r13 ;"
--		"adcx %%r11, %%r11 ;"
--		"adox %%r15, %%r14 ;"
--		"adcx %%rbx, %%rbx ;"
--		"adcx %%r13, %%r13 ;"
--		"adcx %%r14, %%r14 ;"
--
--		"movq 32(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ;" /* B[0]^2 */
--		/*******************/
--		"movq %%rax,  64(%0) ;"
--		"addq %%rcx,  %%r8 ;"
--		"movq  %%r8,  72(%0) ;"
--		"movq 40(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ;" /* B[1]^2 */
--		"adcq %%rax,  %%r9 ;"
--		"movq  %%r9,  80(%0) ;"
--		"adcq %%rcx, %%r10 ;"
--		"movq %%r10,  88(%0) ;"
--		"movq 48(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ;" /* B[2]^2 */
--		"adcq %%rax, %%r11 ;"
--		"movq %%r11,  96(%0) ;"
--		"adcq %%rcx, %%rbx ;"
--		"movq %%rbx, 104(%0) ;"
--		"movq 56(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ;" /* B[3]^2 */
--		"adcq %%rax, %%r13 ;"
--		"movq %%r13, 112(%0) ;"
--		"adcq %%rcx, %%r14 ;"
--		"movq %%r14, 120(%0) ;"
--		:
--		: "r"(c), "r"(a)
--		: "memory", "cc", "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9",
--		  "%r10", "%r11", "%r13", "%r14", "%r15");
-+	u64 x = a;
-+	u64 y = b;
-+	u64 x_xor_y = x ^ y;
-+	u64 x_sub_y = x - y;
-+	u64 x_sub_y_xor_y = x_sub_y ^ y;
-+	u64 q = x_xor_y | x_sub_y_xor_y;
-+	u64 x_xor_q = x ^ q;
-+	u64 x_xor_q_ = x_xor_q >> (u32)63U;
-+	return x_xor_q_ - (u64)1U;
- }
- 
--static void sqr2_256x256_integer_bmi2(u64 *const c, const u64 *const a)
-+/* Computes the addition of four-element f1 with value in f2
-+ * and returns the carry (if any) */
-+static inline u64 add_scalar(u64 *out, const u64 *f1, u64 f2)
- {
--	asm volatile(
--		"movq  8(%1), %%rdx        ;" /* A[1]      */
--		"mulx   (%1),  %%r8,  %%r9 ;" /* A[0]*A[1] */
--		"mulx 16(%1), %%r10, %%r11 ;" /* A[2]*A[1] */
--		"mulx 24(%1), %%rcx, %%r14 ;" /* A[3]*A[1] */
--
--		"movq 16(%1), %%rdx        ;" /* A[2]      */
--		"mulx 24(%1), %%r15, %%r13 ;" /* A[3]*A[2] */
--		"mulx   (%1), %%rax, %%rdx ;" /* A[0]*A[2] */
--
--		"addq %%rax,  %%r9 ;"
--		"adcq %%rdx, %%r10 ;"
--		"adcq %%rcx, %%r11 ;"
--		"adcq %%r14, %%r15 ;"
--		"adcq    $0, %%r13 ;"
--		"movq    $0, %%r14 ;"
--		"adcq    $0, %%r14 ;"
--
--		"movq   (%1), %%rdx        ;" /* A[0]      */
--		"mulx 24(%1), %%rax, %%rcx ;" /* A[0]*A[3] */
--
--		"addq %%rax, %%r10 ;"
--		"adcq %%rcx, %%r11 ;"
--		"adcq    $0, %%r15 ;"
--		"adcq    $0, %%r13 ;"
--		"adcq    $0, %%r14 ;"
--
--		"shldq $1, %%r13, %%r14 ;"
--		"shldq $1, %%r15, %%r13 ;"
--		"shldq $1, %%r11, %%r15 ;"
--		"shldq $1, %%r10, %%r11 ;"
--		"shldq $1,  %%r9, %%r10 ;"
--		"shldq $1,  %%r8,  %%r9 ;"
--		"shlq  $1,  %%r8        ;"
--
--		/*******************/
--		"mulx %%rdx, %%rax, %%rcx ; " /* A[0]^2 */
--		/*******************/
--		"movq %%rax,  0(%0) ;"
--		"addq %%rcx,  %%r8 ;"
--		"movq  %%r8,  8(%0) ;"
--		"movq  8(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ; " /* A[1]^2 */
--		"adcq %%rax,  %%r9 ;"
--		"movq  %%r9, 16(%0) ;"
--		"adcq %%rcx, %%r10 ;"
--		"movq %%r10, 24(%0) ;"
--		"movq 16(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ; " /* A[2]^2 */
--		"adcq %%rax, %%r11 ;"
--		"movq %%r11, 32(%0) ;"
--		"adcq %%rcx, %%r15 ;"
--		"movq %%r15, 40(%0) ;"
--		"movq 24(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ; " /* A[3]^2 */
--		"adcq %%rax, %%r13 ;"
--		"movq %%r13, 48(%0) ;"
--		"adcq %%rcx, %%r14 ;"
--		"movq %%r14, 56(%0) ;"
--
--		"movq 40(%1), %%rdx        ;" /* B[1]      */
--		"mulx 32(%1),  %%r8,  %%r9 ;" /* B[0]*B[1] */
--		"mulx 48(%1), %%r10, %%r11 ;" /* B[2]*B[1] */
--		"mulx 56(%1), %%rcx, %%r14 ;" /* B[3]*B[1] */
--
--		"movq 48(%1), %%rdx        ;" /* B[2]      */
--		"mulx 56(%1), %%r15, %%r13 ;" /* B[3]*B[2] */
--		"mulx 32(%1), %%rax, %%rdx ;" /* B[0]*B[2] */
--
--		"addq %%rax,  %%r9 ;"
--		"adcq %%rdx, %%r10 ;"
--		"adcq %%rcx, %%r11 ;"
--		"adcq %%r14, %%r15 ;"
--		"adcq    $0, %%r13 ;"
--		"movq    $0, %%r14 ;"
--		"adcq    $0, %%r14 ;"
--
--		"movq 32(%1), %%rdx        ;" /* B[0]      */
--		"mulx 56(%1), %%rax, %%rcx ;" /* B[0]*B[3] */
--
--		"addq %%rax, %%r10 ;"
--		"adcq %%rcx, %%r11 ;"
--		"adcq    $0, %%r15 ;"
--		"adcq    $0, %%r13 ;"
--		"adcq    $0, %%r14 ;"
--
--		"shldq $1, %%r13, %%r14 ;"
--		"shldq $1, %%r15, %%r13 ;"
--		"shldq $1, %%r11, %%r15 ;"
--		"shldq $1, %%r10, %%r11 ;"
--		"shldq $1,  %%r9, %%r10 ;"
--		"shldq $1,  %%r8,  %%r9 ;"
--		"shlq  $1,  %%r8        ;"
--
--		/*******************/
--		"mulx %%rdx, %%rax, %%rcx ; " /* B[0]^2 */
--		/*******************/
--		"movq %%rax,  64(%0) ;"
--		"addq %%rcx,  %%r8 ;"
--		"movq  %%r8,  72(%0) ;"
--		"movq 40(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ; " /* B[1]^2 */
--		"adcq %%rax,  %%r9 ;"
--		"movq  %%r9,  80(%0) ;"
--		"adcq %%rcx, %%r10 ;"
--		"movq %%r10,  88(%0) ;"
--		"movq 48(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ; " /* B[2]^2 */
--		"adcq %%rax, %%r11 ;"
--		"movq %%r11,  96(%0) ;"
--		"adcq %%rcx, %%r15 ;"
--		"movq %%r15, 104(%0) ;"
--		"movq 56(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ; " /* B[3]^2 */
--		"adcq %%rax, %%r13 ;"
--		"movq %%r13, 112(%0) ;"
--		"adcq %%rcx, %%r14 ;"
--		"movq %%r14, 120(%0) ;"
--		:
--		: "r"(c), "r"(a)
--		: "memory", "cc", "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10",
--		  "%r11", "%r13", "%r14", "%r15");
--}
-+	u64 carry_r;
- 
--static void red_eltfp25519_2w_adx(u64 *const c, const u64 *const a)
--{
- 	asm volatile(
--		"movl    $38, %%edx; "	/* 2*c = 38 = 2^256 */
--		"mulx 32(%1),  %%r8, %%r10; " /* c*C[4] */
--		"xorl %%ebx, %%ebx ;"
--		"adox   (%1),  %%r8 ;"
--		"mulx 40(%1),  %%r9, %%r11; " /* c*C[5] */
--		"adcx %%r10,  %%r9 ;"
--		"adox  8(%1),  %%r9 ;"
--		"mulx 48(%1), %%r10, %%rax; " /* c*C[6] */
--		"adcx %%r11, %%r10 ;"
--		"adox 16(%1), %%r10 ;"
--		"mulx 56(%1), %%r11, %%rcx; " /* c*C[7] */
--		"adcx %%rax, %%r11 ;"
--		"adox 24(%1), %%r11 ;"
--		/***************************************/
--		"adcx %%rbx, %%rcx ;"
--		"adox  %%rbx, %%rcx ;"
--		"imul %%rdx, %%rcx ;" /* c*C[4], cf=0, of=0 */
--		"adcx %%rcx,  %%r8 ;"
--		"adcx %%rbx,  %%r9 ;"
--		"movq  %%r9,  8(%0) ;"
--		"adcx %%rbx, %%r10 ;"
--		"movq %%r10, 16(%0) ;"
--		"adcx %%rbx, %%r11 ;"
--		"movq %%r11, 24(%0) ;"
--		"mov     $0, %%ecx ;"
--		"cmovc %%edx, %%ecx ;"
--		"addq %%rcx,  %%r8 ;"
--		"movq  %%r8,   (%0) ;"
--
--		"mulx  96(%1),  %%r8, %%r10; " /* c*C[4] */
--		"xorl %%ebx, %%ebx ;"
--		"adox 64(%1),  %%r8 ;"
--		"mulx 104(%1),  %%r9, %%r11; " /* c*C[5] */
--		"adcx %%r10,  %%r9 ;"
--		"adox 72(%1),  %%r9 ;"
--		"mulx 112(%1), %%r10, %%rax; " /* c*C[6] */
--		"adcx %%r11, %%r10 ;"
--		"adox 80(%1), %%r10 ;"
--		"mulx 120(%1), %%r11, %%rcx; " /* c*C[7] */
--		"adcx %%rax, %%r11 ;"
--		"adox 88(%1), %%r11 ;"
--		/****************************************/
--		"adcx %%rbx, %%rcx ;"
--		"adox  %%rbx, %%rcx ;"
--		"imul %%rdx, %%rcx ;" /* c*C[4], cf=0, of=0 */
--		"adcx %%rcx,  %%r8 ;"
--		"adcx %%rbx,  %%r9 ;"
--		"movq  %%r9, 40(%0) ;"
--		"adcx %%rbx, %%r10 ;"
--		"movq %%r10, 48(%0) ;"
--		"adcx %%rbx, %%r11 ;"
--		"movq %%r11, 56(%0) ;"
--		"mov     $0, %%ecx ;"
--		"cmovc %%edx, %%ecx ;"
--		"addq %%rcx,  %%r8 ;"
--		"movq  %%r8, 32(%0) ;"
--		:
--		: "r"(c), "r"(a)
--		: "memory", "cc", "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9",
--		  "%r10", "%r11");
--}
-+		/* Clear registers to propagate the carry bit */
-+		"  xor %%r8, %%r8;"
-+		"  xor %%r9, %%r9;"
-+		"  xor %%r10, %%r10;"
-+		"  xor %%r11, %%r11;"
-+		"  xor %1, %1;"
-+
-+		/* Begin addition chain */
-+		"  addq 0(%3), %0;"
-+		"  movq %0, 0(%2);"
-+		"  adcxq 8(%3), %%r8;"
-+		"  movq %%r8, 8(%2);"
-+		"  adcxq 16(%3), %%r9;"
-+		"  movq %%r9, 16(%2);"
-+		"  adcxq 24(%3), %%r10;"
-+		"  movq %%r10, 24(%2);"
-+
-+		/* Return the carry bit in a register */
-+		"  adcx %%r11, %1;"
-+	: "+&r" (f2), "=&r" (carry_r)
-+	: "r" (out), "r" (f1)
-+	: "%r8", "%r9", "%r10", "%r11", "memory", "cc"
-+	);
- 
--static void red_eltfp25519_2w_bmi2(u64 *const c, const u64 *const a)
--{
--	asm volatile(
--		"movl    $38, %%edx ; "       /* 2*c = 38 = 2^256 */
--		"mulx 32(%1),  %%r8, %%r10 ;" /* c*C[4] */
--		"mulx 40(%1),  %%r9, %%r11 ;" /* c*C[5] */
--		"addq %%r10,  %%r9 ;"
--		"mulx 48(%1), %%r10, %%rax ;" /* c*C[6] */
--		"adcq %%r11, %%r10 ;"
--		"mulx 56(%1), %%r11, %%rcx ;" /* c*C[7] */
--		"adcq %%rax, %%r11 ;"
--		/***************************************/
--		"adcq    $0, %%rcx ;"
--		"addq   (%1),  %%r8 ;"
--		"adcq  8(%1),  %%r9 ;"
--		"adcq 16(%1), %%r10 ;"
--		"adcq 24(%1), %%r11 ;"
--		"adcq     $0, %%rcx ;"
--		"imul %%rdx, %%rcx ;" /* c*C[4], cf=0 */
--		"addq %%rcx,  %%r8 ;"
--		"adcq    $0,  %%r9 ;"
--		"movq  %%r9,  8(%0) ;"
--		"adcq    $0, %%r10 ;"
--		"movq %%r10, 16(%0) ;"
--		"adcq    $0, %%r11 ;"
--		"movq %%r11, 24(%0) ;"
--		"mov     $0, %%ecx ;"
--		"cmovc %%edx, %%ecx ;"
--		"addq %%rcx,  %%r8 ;"
--		"movq  %%r8,   (%0) ;"
--
--		"mulx  96(%1),  %%r8, %%r10 ;" /* c*C[4] */
--		"mulx 104(%1),  %%r9, %%r11 ;" /* c*C[5] */
--		"addq %%r10,  %%r9 ;"
--		"mulx 112(%1), %%r10, %%rax ;" /* c*C[6] */
--		"adcq %%r11, %%r10 ;"
--		"mulx 120(%1), %%r11, %%rcx ;" /* c*C[7] */
--		"adcq %%rax, %%r11 ;"
--		/****************************************/
--		"adcq    $0, %%rcx ;"
--		"addq 64(%1),  %%r8 ;"
--		"adcq 72(%1),  %%r9 ;"
--		"adcq 80(%1), %%r10 ;"
--		"adcq 88(%1), %%r11 ;"
--		"adcq     $0, %%rcx ;"
--		"imul %%rdx, %%rcx ;" /* c*C[4], cf=0 */
--		"addq %%rcx,  %%r8 ;"
--		"adcq    $0,  %%r9 ;"
--		"movq  %%r9, 40(%0) ;"
--		"adcq    $0, %%r10 ;"
--		"movq %%r10, 48(%0) ;"
--		"adcq    $0, %%r11 ;"
--		"movq %%r11, 56(%0) ;"
--		"mov     $0, %%ecx ;"
--		"cmovc %%edx, %%ecx ;"
--		"addq %%rcx,  %%r8 ;"
--		"movq  %%r8, 32(%0) ;"
--		:
--		: "r"(c), "r"(a)
--		: "memory", "cc", "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10",
--		  "%r11");
-+	return carry_r;
- }
- 
--static void mul_256x256_integer_adx(u64 *const c, const u64 *const a,
--				    const u64 *const b)
-+/* Computes the field addition of two field elements */
-+static inline void fadd(u64 *out, const u64 *f1, const u64 *f2)
- {
- 	asm volatile(
--		"movq   (%1), %%rdx; "	/* A[0] */
--		"mulx   (%2),  %%r8,  %%r9; " /* A[0]*B[0] */
--		"xorl %%r10d, %%r10d ;"
--		"movq  %%r8,  (%0) ;"
--		"mulx  8(%2), %%r10, %%r11; " /* A[0]*B[1] */
--		"adox  %%r9, %%r10 ;"
--		"movq %%r10, 8(%0) ;"
--		"mulx 16(%2), %%r15, %%r13; " /* A[0]*B[2] */
--		"adox %%r11, %%r15 ;"
--		"mulx 24(%2), %%r14, %%rdx; " /* A[0]*B[3] */
--		"adox %%r13, %%r14 ;"
--		"movq $0, %%rax ;"
--		/******************************************/
--		"adox %%rdx, %%rax ;"
--
--		"movq  8(%1), %%rdx; "	/* A[1] */
--		"mulx   (%2),  %%r8,  %%r9; " /* A[1]*B[0] */
--		"xorl %%r10d, %%r10d ;"
--		"adcx 8(%0),  %%r8 ;"
--		"movq  %%r8,  8(%0) ;"
--		"mulx  8(%2), %%r10, %%r11; " /* A[1]*B[1] */
--		"adox  %%r9, %%r10 ;"
--		"adcx %%r15, %%r10 ;"
--		"movq %%r10, 16(%0) ;"
--		"mulx 16(%2), %%r15, %%r13; " /* A[1]*B[2] */
--		"adox %%r11, %%r15 ;"
--		"adcx %%r14, %%r15 ;"
--		"movq $0, %%r8  ;"
--		"mulx 24(%2), %%r14, %%rdx; " /* A[1]*B[3] */
--		"adox %%r13, %%r14 ;"
--		"adcx %%rax, %%r14 ;"
--		"movq $0, %%rax ;"
--		/******************************************/
--		"adox %%rdx, %%rax ;"
--		"adcx  %%r8, %%rax ;"
--
--		"movq 16(%1), %%rdx; "	/* A[2] */
--		"mulx   (%2),  %%r8,  %%r9; " /* A[2]*B[0] */
--		"xorl %%r10d, %%r10d ;"
--		"adcx 16(%0), %%r8 ;"
--		"movq  %%r8, 16(%0) ;"
--		"mulx  8(%2), %%r10, %%r11; " /* A[2]*B[1] */
--		"adox  %%r9, %%r10 ;"
--		"adcx %%r15, %%r10 ;"
--		"movq %%r10, 24(%0) ;"
--		"mulx 16(%2), %%r15, %%r13; " /* A[2]*B[2] */
--		"adox %%r11, %%r15 ;"
--		"adcx %%r14, %%r15 ;"
--		"movq $0, %%r8  ;"
--		"mulx 24(%2), %%r14, %%rdx; " /* A[2]*B[3] */
--		"adox %%r13, %%r14 ;"
--		"adcx %%rax, %%r14 ;"
--		"movq $0, %%rax ;"
--		/******************************************/
--		"adox %%rdx, %%rax ;"
--		"adcx  %%r8, %%rax ;"
--
--		"movq 24(%1), %%rdx; "	/* A[3] */
--		"mulx   (%2),  %%r8,  %%r9; " /* A[3]*B[0] */
--		"xorl %%r10d, %%r10d ;"
--		"adcx 24(%0), %%r8 ;"
--		"movq  %%r8, 24(%0) ;"
--		"mulx  8(%2), %%r10, %%r11; " /* A[3]*B[1] */
--		"adox  %%r9, %%r10 ;"
--		"adcx %%r15, %%r10 ;"
--		"movq %%r10, 32(%0) ;"
--		"mulx 16(%2), %%r15, %%r13; " /* A[3]*B[2] */
--		"adox %%r11, %%r15 ;"
--		"adcx %%r14, %%r15 ;"
--		"movq %%r15, 40(%0) ;"
--		"movq $0, %%r8  ;"
--		"mulx 24(%2), %%r14, %%rdx; " /* A[3]*B[3] */
--		"adox %%r13, %%r14 ;"
--		"adcx %%rax, %%r14 ;"
--		"movq %%r14, 48(%0) ;"
--		"movq $0, %%rax ;"
--		/******************************************/
--		"adox %%rdx, %%rax ;"
--		"adcx  %%r8, %%rax ;"
--		"movq %%rax, 56(%0) ;"
--		:
--		: "r"(c), "r"(a), "r"(b)
--		: "memory", "cc", "%rax", "%rdx", "%r8", "%r9", "%r10", "%r11",
--		  "%r13", "%r14", "%r15");
-+		/* Compute the raw addition of f1 + f2 */
-+		"  movq 0(%0), %%r8;"
-+		"  addq 0(%2), %%r8;"
-+		"  movq 8(%0), %%r9;"
-+		"  adcxq 8(%2), %%r9;"
-+		"  movq 16(%0), %%r10;"
-+		"  adcxq 16(%2), %%r10;"
-+		"  movq 24(%0), %%r11;"
-+		"  adcxq 24(%2), %%r11;"
-+
-+		/* Wrap the result back into the field */
-+
-+		/* Step 1: Compute carry*38 */
-+		"  mov $0, %%rax;"
-+		"  mov $38, %0;"
-+		"  cmovc %0, %%rax;"
-+
-+		/* Step 2: Add carry*38 to the original sum */
-+		"  xor %%rcx, %%rcx;"
-+		"  add %%rax, %%r8;"
-+		"  adcx %%rcx, %%r9;"
-+		"  movq %%r9, 8(%1);"
-+		"  adcx %%rcx, %%r10;"
-+		"  movq %%r10, 16(%1);"
-+		"  adcx %%rcx, %%r11;"
-+		"  movq %%r11, 24(%1);"
-+
-+		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-+		"  mov $0, %%rax;"
-+		"  cmovc %0, %%rax;"
-+		"  add %%rax, %%r8;"
-+		"  movq %%r8, 0(%1);"
-+	: "+&r" (f2)
-+	: "r" (out), "r" (f1)
-+	: "%rax", "%rcx", "%r8", "%r9", "%r10", "%r11", "memory", "cc"
-+	);
- }
- 
--static void mul_256x256_integer_bmi2(u64 *const c, const u64 *const a,
--				     const u64 *const b)
-+/* Computes the field substraction of two field elements */
-+static inline void fsub(u64 *out, const u64 *f1, const u64 *f2)
- {
- 	asm volatile(
--		"movq   (%1), %%rdx; "	/* A[0] */
--		"mulx   (%2),  %%r8, %%r15; " /* A[0]*B[0] */
--		"movq %%r8,  (%0) ;"
--		"mulx  8(%2), %%r10, %%rax; " /* A[0]*B[1] */
--		"addq %%r10, %%r15 ;"
--		"mulx 16(%2),  %%r8, %%rbx; " /* A[0]*B[2] */
--		"adcq  %%r8, %%rax ;"
--		"mulx 24(%2), %%r10, %%rcx; " /* A[0]*B[3] */
--		"adcq %%r10, %%rbx ;"
--		/******************************************/
--		"adcq    $0, %%rcx ;"
--
--		"movq  8(%1), %%rdx; "	/* A[1] */
--		"mulx   (%2),  %%r8,  %%r9; " /* A[1]*B[0] */
--		"addq %%r15,  %%r8 ;"
--		"movq %%r8, 8(%0) ;"
--		"mulx  8(%2), %%r10, %%r11; " /* A[1]*B[1] */
--		"adcq %%r10,  %%r9 ;"
--		"mulx 16(%2),  %%r8, %%r13; " /* A[1]*B[2] */
--		"adcq  %%r8, %%r11 ;"
--		"mulx 24(%2), %%r10, %%r15; " /* A[1]*B[3] */
--		"adcq %%r10, %%r13 ;"
--		/******************************************/
--		"adcq    $0, %%r15 ;"
--
--		"addq  %%r9, %%rax ;"
--		"adcq %%r11, %%rbx ;"
--		"adcq %%r13, %%rcx ;"
--		"adcq    $0, %%r15 ;"
--
--		"movq 16(%1), %%rdx; "	/* A[2] */
--		"mulx   (%2),  %%r8,  %%r9; " /* A[2]*B[0] */
--		"addq %%rax,  %%r8 ;"
--		"movq %%r8, 16(%0) ;"
--		"mulx  8(%2), %%r10, %%r11; " /* A[2]*B[1] */
--		"adcq %%r10,  %%r9 ;"
--		"mulx 16(%2),  %%r8, %%r13; " /* A[2]*B[2] */
--		"adcq  %%r8, %%r11 ;"
--		"mulx 24(%2), %%r10, %%rax; " /* A[2]*B[3] */
--		"adcq %%r10, %%r13 ;"
--		/******************************************/
--		"adcq    $0, %%rax ;"
--
--		"addq  %%r9, %%rbx ;"
--		"adcq %%r11, %%rcx ;"
--		"adcq %%r13, %%r15 ;"
--		"adcq    $0, %%rax ;"
--
--		"movq 24(%1), %%rdx; "	/* A[3] */
--		"mulx   (%2),  %%r8,  %%r9; " /* A[3]*B[0] */
--		"addq %%rbx,  %%r8 ;"
--		"movq %%r8, 24(%0) ;"
--		"mulx  8(%2), %%r10, %%r11; " /* A[3]*B[1] */
--		"adcq %%r10,  %%r9 ;"
--		"mulx 16(%2),  %%r8, %%r13; " /* A[3]*B[2] */
--		"adcq  %%r8, %%r11 ;"
--		"mulx 24(%2), %%r10, %%rbx; " /* A[3]*B[3] */
--		"adcq %%r10, %%r13 ;"
--		/******************************************/
--		"adcq    $0, %%rbx ;"
--
--		"addq  %%r9, %%rcx ;"
--		"movq %%rcx, 32(%0) ;"
--		"adcq %%r11, %%r15 ;"
--		"movq %%r15, 40(%0) ;"
--		"adcq %%r13, %%rax ;"
--		"movq %%rax, 48(%0) ;"
--		"adcq    $0, %%rbx ;"
--		"movq %%rbx, 56(%0) ;"
--		:
--		: "r"(c), "r"(a), "r"(b)
--		: "memory", "cc", "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9",
--		  "%r10", "%r11", "%r13", "%r15");
-+		/* Compute the raw substraction of f1-f2 */
-+		"  movq 0(%1), %%r8;"
-+		"  subq 0(%2), %%r8;"
-+		"  movq 8(%1), %%r9;"
-+		"  sbbq 8(%2), %%r9;"
-+		"  movq 16(%1), %%r10;"
-+		"  sbbq 16(%2), %%r10;"
-+		"  movq 24(%1), %%r11;"
-+		"  sbbq 24(%2), %%r11;"
-+
-+		/* Wrap the result back into the field */
-+
-+		/* Step 1: Compute carry*38 */
-+		"  mov $0, %%rax;"
-+		"  mov $38, %%rcx;"
-+		"  cmovc %%rcx, %%rax;"
-+
-+		/* Step 2: Substract carry*38 from the original difference */
-+		"  sub %%rax, %%r8;"
-+		"  sbb $0, %%r9;"
-+		"  sbb $0, %%r10;"
-+		"  sbb $0, %%r11;"
-+
-+		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-+		"  mov $0, %%rax;"
-+		"  cmovc %%rcx, %%rax;"
-+		"  sub %%rax, %%r8;"
-+
-+		/* Store the result */
-+		"  movq %%r8, 0(%0);"
-+		"  movq %%r9, 8(%0);"
-+		"  movq %%r10, 16(%0);"
-+		"  movq %%r11, 24(%0);"
-+	:
-+	: "r" (out), "r" (f1), "r" (f2)
-+	: "%rax", "%rcx", "%r8", "%r9", "%r10", "%r11", "memory", "cc"
-+	);
- }
- 
--static void sqr_256x256_integer_adx(u64 *const c, const u64 *const a)
-+/* Computes a field multiplication: out <- f1 * f2
-+ * Uses the 8-element buffer tmp for intermediate results */
-+static inline void fmul(u64 *out, const u64 *f1, const u64 *f2, u64 *tmp)
- {
- 	asm volatile(
--		"movq   (%1), %%rdx        ;" /* A[0]      */
--		"mulx  8(%1),  %%r8, %%r14 ;" /* A[1]*A[0] */
--		"xorl %%r15d, %%r15d;"
--		"mulx 16(%1),  %%r9, %%r10 ;" /* A[2]*A[0] */
--		"adcx %%r14,  %%r9 ;"
--		"mulx 24(%1), %%rax, %%rcx ;" /* A[3]*A[0] */
--		"adcx %%rax, %%r10 ;"
--		"movq 24(%1), %%rdx        ;" /* A[3]      */
--		"mulx  8(%1), %%r11, %%rbx ;" /* A[1]*A[3] */
--		"adcx %%rcx, %%r11 ;"
--		"mulx 16(%1), %%rax, %%r13 ;" /* A[2]*A[3] */
--		"adcx %%rax, %%rbx ;"
--		"movq  8(%1), %%rdx        ;" /* A[1]      */
--		"adcx %%r15, %%r13 ;"
--		"mulx 16(%1), %%rax, %%rcx ;" /* A[2]*A[1] */
--		"movq    $0, %%r14 ;"
--		/******************************************/
--		"adcx %%r15, %%r14 ;"
--
--		"xorl %%r15d, %%r15d;"
--		"adox %%rax, %%r10 ;"
--		"adcx  %%r8,  %%r8 ;"
--		"adox %%rcx, %%r11 ;"
--		"adcx  %%r9,  %%r9 ;"
--		"adox %%r15, %%rbx ;"
--		"adcx %%r10, %%r10 ;"
--		"adox %%r15, %%r13 ;"
--		"adcx %%r11, %%r11 ;"
--		"adox %%r15, %%r14 ;"
--		"adcx %%rbx, %%rbx ;"
--		"adcx %%r13, %%r13 ;"
--		"adcx %%r14, %%r14 ;"
--
--		"movq   (%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ;" /* A[0]^2 */
--		/*******************/
--		"movq %%rax,  0(%0) ;"
--		"addq %%rcx,  %%r8 ;"
--		"movq  %%r8,  8(%0) ;"
--		"movq  8(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ;" /* A[1]^2 */
--		"adcq %%rax,  %%r9 ;"
--		"movq  %%r9, 16(%0) ;"
--		"adcq %%rcx, %%r10 ;"
--		"movq %%r10, 24(%0) ;"
--		"movq 16(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ;" /* A[2]^2 */
--		"adcq %%rax, %%r11 ;"
--		"movq %%r11, 32(%0) ;"
--		"adcq %%rcx, %%rbx ;"
--		"movq %%rbx, 40(%0) ;"
--		"movq 24(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ;" /* A[3]^2 */
--		"adcq %%rax, %%r13 ;"
--		"movq %%r13, 48(%0) ;"
--		"adcq %%rcx, %%r14 ;"
--		"movq %%r14, 56(%0) ;"
--		:
--		: "r"(c), "r"(a)
--		: "memory", "cc", "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9",
--		  "%r10", "%r11", "%r13", "%r14", "%r15");
--}
-+		/* Compute the raw multiplication: tmp <- src1 * src2 */
- 
--static void sqr_256x256_integer_bmi2(u64 *const c, const u64 *const a)
--{
--	asm volatile(
--		"movq  8(%1), %%rdx        ;" /* A[1]      */
--		"mulx   (%1),  %%r8,  %%r9 ;" /* A[0]*A[1] */
--		"mulx 16(%1), %%r10, %%r11 ;" /* A[2]*A[1] */
--		"mulx 24(%1), %%rcx, %%r14 ;" /* A[3]*A[1] */
--
--		"movq 16(%1), %%rdx        ;" /* A[2]      */
--		"mulx 24(%1), %%r15, %%r13 ;" /* A[3]*A[2] */
--		"mulx   (%1), %%rax, %%rdx ;" /* A[0]*A[2] */
--
--		"addq %%rax,  %%r9 ;"
--		"adcq %%rdx, %%r10 ;"
--		"adcq %%rcx, %%r11 ;"
--		"adcq %%r14, %%r15 ;"
--		"adcq    $0, %%r13 ;"
--		"movq    $0, %%r14 ;"
--		"adcq    $0, %%r14 ;"
--
--		"movq   (%1), %%rdx        ;" /* A[0]      */
--		"mulx 24(%1), %%rax, %%rcx ;" /* A[0]*A[3] */
--
--		"addq %%rax, %%r10 ;"
--		"adcq %%rcx, %%r11 ;"
--		"adcq    $0, %%r15 ;"
--		"adcq    $0, %%r13 ;"
--		"adcq    $0, %%r14 ;"
--
--		"shldq $1, %%r13, %%r14 ;"
--		"shldq $1, %%r15, %%r13 ;"
--		"shldq $1, %%r11, %%r15 ;"
--		"shldq $1, %%r10, %%r11 ;"
--		"shldq $1,  %%r9, %%r10 ;"
--		"shldq $1,  %%r8,  %%r9 ;"
--		"shlq  $1,  %%r8        ;"
--
--		/*******************/
--		"mulx %%rdx, %%rax, %%rcx ;" /* A[0]^2 */
--		/*******************/
--		"movq %%rax,  0(%0) ;"
--		"addq %%rcx,  %%r8 ;"
--		"movq  %%r8,  8(%0) ;"
--		"movq  8(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ;" /* A[1]^2 */
--		"adcq %%rax,  %%r9 ;"
--		"movq  %%r9, 16(%0) ;"
--		"adcq %%rcx, %%r10 ;"
--		"movq %%r10, 24(%0) ;"
--		"movq 16(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ;" /* A[2]^2 */
--		"adcq %%rax, %%r11 ;"
--		"movq %%r11, 32(%0) ;"
--		"adcq %%rcx, %%r15 ;"
--		"movq %%r15, 40(%0) ;"
--		"movq 24(%1), %%rdx ;"
--		"mulx %%rdx, %%rax, %%rcx ;" /* A[3]^2 */
--		"adcq %%rax, %%r13 ;"
--		"movq %%r13, 48(%0) ;"
--		"adcq %%rcx, %%r14 ;"
--		"movq %%r14, 56(%0) ;"
--		:
--		: "r"(c), "r"(a)
--		: "memory", "cc", "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10",
--		  "%r11", "%r13", "%r14", "%r15");
-+		/* Compute src1[0] * src2 */
-+		"  movq 0(%1), %%rdx;"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  movq %%r8, 0(%0);"
-+		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  movq %%r10, 8(%0);"
-+		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"
-+		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  mov $0, %%rax;"
-+		                                   "  adox %%rdx, %%rax;"
-+		/* Compute src1[1] * src2 */
-+		"  movq 8(%1), %%rdx;"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  adcxq 8(%0), %%r8;"    "  movq %%r8, 8(%0);"
-+		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 16(%0);"
-+		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  mov $0, %%r8;"
-+		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
-+		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
-+		/* Compute src1[2] * src2 */
-+		"  movq 16(%1), %%rdx;"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 16(%0), %%r8;"    "  movq %%r8, 16(%0);"
-+		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 24(%0);"
-+		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  mov $0, %%r8;"
-+		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
-+		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
-+		/* Compute src1[3] * src2 */
-+		"  movq 24(%1), %%rdx;"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 24(%0), %%r8;"    "  movq %%r8, 24(%0);"
-+		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 32(%0);"
-+		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  movq %%r12, 40(%0);"    "  mov $0, %%r8;"
-+		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  movq %%r14, 48(%0);"    "  mov $0, %%rax;"
-+		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"     "  movq %%rax, 56(%0);"
-+		/* Line up pointers */
-+		"  mov %0, %1;"
-+		"  mov %2, %0;"
-+
-+		/* Wrap the result back into the field */
-+
-+		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
-+		"  mov $38, %%rdx;"
-+		"  mulxq 32(%1), %%r8, %%r13;"
-+		"  xor %3, %3;"
-+		"  adoxq 0(%1), %%r8;"
-+		"  mulxq 40(%1), %%r9, %%r12;"
-+		"  adcx %%r13, %%r9;"
-+		"  adoxq 8(%1), %%r9;"
-+		"  mulxq 48(%1), %%r10, %%r13;"
-+		"  adcx %%r12, %%r10;"
-+		"  adoxq 16(%1), %%r10;"
-+		"  mulxq 56(%1), %%r11, %%rax;"
-+		"  adcx %%r13, %%r11;"
-+		"  adoxq 24(%1), %%r11;"
-+		"  adcx %3, %%rax;"
-+		"  adox %3, %%rax;"
-+		"  imul %%rdx, %%rax;"
-+
-+		/* Step 2: Fold the carry back into dst */
-+		"  add %%rax, %%r8;"
-+		"  adcx %3, %%r9;"
-+		"  movq %%r9, 8(%0);"
-+		"  adcx %3, %%r10;"
-+		"  movq %%r10, 16(%0);"
-+		"  adcx %3, %%r11;"
-+		"  movq %%r11, 24(%0);"
-+
-+		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-+		"  mov $0, %%rax;"
-+		"  cmovc %%rdx, %%rax;"
-+		"  add %%rax, %%r8;"
-+		"  movq %%r8, 0(%0);"
-+	: "+&r" (tmp), "+&r" (f1), "+&r" (out), "+&r" (f2)
-+	:
-+	: "%rax", "%rdx", "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "memory", "cc"
-+	);
- }
- 
--static void red_eltfp25519_1w_adx(u64 *const c, const u64 *const a)
-+/* Computes two field multiplications:
-+ * out[0] <- f1[0] * f2[0]
-+ * out[1] <- f1[1] * f2[1]
-+ * Uses the 16-element buffer tmp for intermediate results. */
-+static inline void fmul2(u64 *out, const u64 *f1, const u64 *f2, u64 *tmp)
- {
- 	asm volatile(
--		"movl    $38, %%edx ;"	/* 2*c = 38 = 2^256 */
--		"mulx 32(%1),  %%r8, %%r10 ;" /* c*C[4] */
--		"xorl %%ebx, %%ebx ;"
--		"adox   (%1),  %%r8 ;"
--		"mulx 40(%1),  %%r9, %%r11 ;" /* c*C[5] */
--		"adcx %%r10,  %%r9 ;"
--		"adox  8(%1),  %%r9 ;"
--		"mulx 48(%1), %%r10, %%rax ;" /* c*C[6] */
--		"adcx %%r11, %%r10 ;"
--		"adox 16(%1), %%r10 ;"
--		"mulx 56(%1), %%r11, %%rcx ;" /* c*C[7] */
--		"adcx %%rax, %%r11 ;"
--		"adox 24(%1), %%r11 ;"
--		/***************************************/
--		"adcx %%rbx, %%rcx ;"
--		"adox  %%rbx, %%rcx ;"
--		"imul %%rdx, %%rcx ;" /* c*C[4], cf=0, of=0 */
--		"adcx %%rcx,  %%r8 ;"
--		"adcx %%rbx,  %%r9 ;"
--		"movq  %%r9,  8(%0) ;"
--		"adcx %%rbx, %%r10 ;"
--		"movq %%r10, 16(%0) ;"
--		"adcx %%rbx, %%r11 ;"
--		"movq %%r11, 24(%0) ;"
--		"mov     $0, %%ecx ;"
--		"cmovc %%edx, %%ecx ;"
--		"addq %%rcx,  %%r8 ;"
--		"movq  %%r8,   (%0) ;"
--		:
--		: "r"(c), "r"(a)
--		: "memory", "cc", "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9",
--		  "%r10", "%r11");
--}
-+		/* Compute the raw multiplication tmp[0] <- f1[0] * f2[0] */
- 
--static void red_eltfp25519_1w_bmi2(u64 *const c, const u64 *const a)
--{
--	asm volatile(
--		"movl    $38, %%edx ;"	/* 2*c = 38 = 2^256 */
--		"mulx 32(%1),  %%r8, %%r10 ;" /* c*C[4] */
--		"mulx 40(%1),  %%r9, %%r11 ;" /* c*C[5] */
--		"addq %%r10,  %%r9 ;"
--		"mulx 48(%1), %%r10, %%rax ;" /* c*C[6] */
--		"adcq %%r11, %%r10 ;"
--		"mulx 56(%1), %%r11, %%rcx ;" /* c*C[7] */
--		"adcq %%rax, %%r11 ;"
--		/***************************************/
--		"adcq    $0, %%rcx ;"
--		"addq   (%1),  %%r8 ;"
--		"adcq  8(%1),  %%r9 ;"
--		"adcq 16(%1), %%r10 ;"
--		"adcq 24(%1), %%r11 ;"
--		"adcq     $0, %%rcx ;"
--		"imul %%rdx, %%rcx ;" /* c*C[4], cf=0 */
--		"addq %%rcx,  %%r8 ;"
--		"adcq    $0,  %%r9 ;"
--		"movq  %%r9,  8(%0) ;"
--		"adcq    $0, %%r10 ;"
--		"movq %%r10, 16(%0) ;"
--		"adcq    $0, %%r11 ;"
--		"movq %%r11, 24(%0) ;"
--		"mov     $0, %%ecx ;"
--		"cmovc %%edx, %%ecx ;"
--		"addq %%rcx,  %%r8 ;"
--		"movq  %%r8,   (%0) ;"
--		:
--		: "r"(c), "r"(a)
--		: "memory", "cc", "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10",
--		  "%r11");
-+		/* Compute src1[0] * src2 */
-+		"  movq 0(%1), %%rdx;"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  movq %%r8, 0(%0);"
-+		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  movq %%r10, 8(%0);"
-+		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"
-+		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  mov $0, %%rax;"
-+		                                   "  adox %%rdx, %%rax;"
-+		/* Compute src1[1] * src2 */
-+		"  movq 8(%1), %%rdx;"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  adcxq 8(%0), %%r8;"    "  movq %%r8, 8(%0);"
-+		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 16(%0);"
-+		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  mov $0, %%r8;"
-+		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
-+		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
-+		/* Compute src1[2] * src2 */
-+		"  movq 16(%1), %%rdx;"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 16(%0), %%r8;"    "  movq %%r8, 16(%0);"
-+		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 24(%0);"
-+		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  mov $0, %%r8;"
-+		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
-+		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
-+		/* Compute src1[3] * src2 */
-+		"  movq 24(%1), %%rdx;"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 24(%0), %%r8;"    "  movq %%r8, 24(%0);"
-+		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 32(%0);"
-+		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  movq %%r12, 40(%0);"    "  mov $0, %%r8;"
-+		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  movq %%r14, 48(%0);"    "  mov $0, %%rax;"
-+		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"     "  movq %%rax, 56(%0);"
-+
-+		/* Compute the raw multiplication tmp[1] <- f1[1] * f2[1] */
-+
-+		/* Compute src1[0] * src2 */
-+		"  movq 32(%1), %%rdx;"
-+		"  mulxq 32(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  movq %%r8, 64(%0);"
-+		"  mulxq 40(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  movq %%r10, 72(%0);"
-+		"  mulxq 48(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"
-+		"  mulxq 56(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  mov $0, %%rax;"
-+		                                   "  adox %%rdx, %%rax;"
-+		/* Compute src1[1] * src2 */
-+		"  movq 40(%1), %%rdx;"
-+		"  mulxq 32(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  adcxq 72(%0), %%r8;"    "  movq %%r8, 72(%0);"
-+		"  mulxq 40(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 80(%0);"
-+		"  mulxq 48(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  mov $0, %%r8;"
-+		"  mulxq 56(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
-+		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
-+		/* Compute src1[2] * src2 */
-+		"  movq 48(%1), %%rdx;"
-+		"  mulxq 32(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 80(%0), %%r8;"    "  movq %%r8, 80(%0);"
-+		"  mulxq 40(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 88(%0);"
-+		"  mulxq 48(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  mov $0, %%r8;"
-+		"  mulxq 56(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
-+		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
-+		/* Compute src1[3] * src2 */
-+		"  movq 56(%1), %%rdx;"
-+		"  mulxq 32(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 88(%0), %%r8;"    "  movq %%r8, 88(%0);"
-+		"  mulxq 40(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 96(%0);"
-+		"  mulxq 48(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  movq %%r12, 104(%0);"    "  mov $0, %%r8;"
-+		"  mulxq 56(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  movq %%r14, 112(%0);"    "  mov $0, %%rax;"
-+		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"     "  movq %%rax, 120(%0);"
-+		/* Line up pointers */
-+		"  mov %0, %1;"
-+		"  mov %2, %0;"
-+
-+		/* Wrap the results back into the field */
-+
-+		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
-+		"  mov $38, %%rdx;"
-+		"  mulxq 32(%1), %%r8, %%r13;"
-+		"  xor %3, %3;"
-+		"  adoxq 0(%1), %%r8;"
-+		"  mulxq 40(%1), %%r9, %%r12;"
-+		"  adcx %%r13, %%r9;"
-+		"  adoxq 8(%1), %%r9;"
-+		"  mulxq 48(%1), %%r10, %%r13;"
-+		"  adcx %%r12, %%r10;"
-+		"  adoxq 16(%1), %%r10;"
-+		"  mulxq 56(%1), %%r11, %%rax;"
-+		"  adcx %%r13, %%r11;"
-+		"  adoxq 24(%1), %%r11;"
-+		"  adcx %3, %%rax;"
-+		"  adox %3, %%rax;"
-+		"  imul %%rdx, %%rax;"
-+
-+		/* Step 2: Fold the carry back into dst */
-+		"  add %%rax, %%r8;"
-+		"  adcx %3, %%r9;"
-+		"  movq %%r9, 8(%0);"
-+		"  adcx %3, %%r10;"
-+		"  movq %%r10, 16(%0);"
-+		"  adcx %3, %%r11;"
-+		"  movq %%r11, 24(%0);"
-+
-+		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-+		"  mov $0, %%rax;"
-+		"  cmovc %%rdx, %%rax;"
-+		"  add %%rax, %%r8;"
-+		"  movq %%r8, 0(%0);"
-+
-+		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
-+		"  mov $38, %%rdx;"
-+		"  mulxq 96(%1), %%r8, %%r13;"
-+		"  xor %3, %3;"
-+		"  adoxq 64(%1), %%r8;"
-+		"  mulxq 104(%1), %%r9, %%r12;"
-+		"  adcx %%r13, %%r9;"
-+		"  adoxq 72(%1), %%r9;"
-+		"  mulxq 112(%1), %%r10, %%r13;"
-+		"  adcx %%r12, %%r10;"
-+		"  adoxq 80(%1), %%r10;"
-+		"  mulxq 120(%1), %%r11, %%rax;"
-+		"  adcx %%r13, %%r11;"
-+		"  adoxq 88(%1), %%r11;"
-+		"  adcx %3, %%rax;"
-+		"  adox %3, %%rax;"
-+		"  imul %%rdx, %%rax;"
-+
-+		/* Step 2: Fold the carry back into dst */
-+		"  add %%rax, %%r8;"
-+		"  adcx %3, %%r9;"
-+		"  movq %%r9, 40(%0);"
-+		"  adcx %3, %%r10;"
-+		"  movq %%r10, 48(%0);"
-+		"  adcx %3, %%r11;"
-+		"  movq %%r11, 56(%0);"
-+
-+		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-+		"  mov $0, %%rax;"
-+		"  cmovc %%rdx, %%rax;"
-+		"  add %%rax, %%r8;"
-+		"  movq %%r8, 32(%0);"
-+	: "+&r" (tmp), "+&r" (f1), "+&r" (out), "+&r" (f2)
-+	:
-+	: "%rax", "%rdx", "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "memory", "cc"
-+	);
- }
- 
--static __always_inline void
--add_eltfp25519_1w_adx(u64 *const c, const u64 *const a, const u64 *const b)
-+/* Computes the field multiplication of four-element f1 with value in f2 */
-+static inline void fmul_scalar(u64 *out, const u64 *f1, u64 f2)
- {
--	asm volatile(
--		"mov     $38, %%eax ;"
--		"xorl  %%ecx, %%ecx ;"
--		"movq   (%2),  %%r8 ;"
--		"adcx   (%1),  %%r8 ;"
--		"movq  8(%2),  %%r9 ;"
--		"adcx  8(%1),  %%r9 ;"
--		"movq 16(%2), %%r10 ;"
--		"adcx 16(%1), %%r10 ;"
--		"movq 24(%2), %%r11 ;"
--		"adcx 24(%1), %%r11 ;"
--		"cmovc %%eax, %%ecx ;"
--		"xorl %%eax, %%eax  ;"
--		"adcx %%rcx,  %%r8  ;"
--		"adcx %%rax,  %%r9  ;"
--		"movq  %%r9,  8(%0) ;"
--		"adcx %%rax, %%r10  ;"
--		"movq %%r10, 16(%0) ;"
--		"adcx %%rax, %%r11  ;"
--		"movq %%r11, 24(%0) ;"
--		"mov     $38, %%ecx ;"
--		"cmovc %%ecx, %%eax ;"
--		"addq %%rax,  %%r8  ;"
--		"movq  %%r8,   (%0) ;"
--		:
--		: "r"(c), "r"(a), "r"(b)
--		: "memory", "cc", "%rax", "%rcx", "%r8", "%r9", "%r10", "%r11");
--}
-+	register u64 f2_r asm("rdx") = f2;
- 
--static __always_inline void
--add_eltfp25519_1w_bmi2(u64 *const c, const u64 *const a, const u64 *const b)
--{
- 	asm volatile(
--		"mov     $38, %%eax ;"
--		"movq   (%2),  %%r8 ;"
--		"addq   (%1),  %%r8 ;"
--		"movq  8(%2),  %%r9 ;"
--		"adcq  8(%1),  %%r9 ;"
--		"movq 16(%2), %%r10 ;"
--		"adcq 16(%1), %%r10 ;"
--		"movq 24(%2), %%r11 ;"
--		"adcq 24(%1), %%r11 ;"
--		"mov      $0, %%ecx ;"
--		"cmovc %%eax, %%ecx ;"
--		"addq %%rcx,  %%r8  ;"
--		"adcq    $0,  %%r9  ;"
--		"movq  %%r9,  8(%0) ;"
--		"adcq    $0, %%r10  ;"
--		"movq %%r10, 16(%0) ;"
--		"adcq    $0, %%r11  ;"
--		"movq %%r11, 24(%0) ;"
--		"mov     $0, %%ecx  ;"
--		"cmovc %%eax, %%ecx ;"
--		"addq %%rcx,  %%r8  ;"
--		"movq  %%r8,   (%0) ;"
--		:
--		: "r"(c), "r"(a), "r"(b)
--		: "memory", "cc", "%rax", "%rcx", "%r8", "%r9", "%r10", "%r11");
-+		/* Compute the raw multiplication of f1*f2 */
-+		"  mulxq 0(%2), %%r8, %%rcx;"      /* f1[0]*f2 */
-+		"  mulxq 8(%2), %%r9, %%r12;"      /* f1[1]*f2 */
-+		"  add %%rcx, %%r9;"
-+		"  mov $0, %%rcx;"
-+		"  mulxq 16(%2), %%r10, %%r13;"    /* f1[2]*f2 */
-+		"  adcx %%r12, %%r10;"
-+		"  mulxq 24(%2), %%r11, %%rax;"    /* f1[3]*f2 */
-+		"  adcx %%r13, %%r11;"
-+		"  adcx %%rcx, %%rax;"
-+
-+		/* Wrap the result back into the field */
-+
-+		/* Step 1: Compute carry*38 */
-+		"  mov $38, %%rdx;"
-+		"  imul %%rdx, %%rax;"
-+
-+		/* Step 2: Fold the carry back into dst */
-+		"  add %%rax, %%r8;"
-+		"  adcx %%rcx, %%r9;"
-+		"  movq %%r9, 8(%1);"
-+		"  adcx %%rcx, %%r10;"
-+		"  movq %%r10, 16(%1);"
-+		"  adcx %%rcx, %%r11;"
-+		"  movq %%r11, 24(%1);"
-+
-+		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-+		"  mov $0, %%rax;"
-+		"  cmovc %%rdx, %%rax;"
-+		"  add %%rax, %%r8;"
-+		"  movq %%r8, 0(%1);"
-+	: "+&r" (f2_r)
-+	: "r" (out), "r" (f1)
-+	: "%rax", "%rcx", "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "memory", "cc"
-+	);
- }
- 
--static __always_inline void
--sub_eltfp25519_1w(u64 *const c, const u64 *const a, const u64 *const b)
--{
--	asm volatile(
--		"mov     $38, %%eax ;"
--		"movq   (%1),  %%r8 ;"
--		"subq   (%2),  %%r8 ;"
--		"movq  8(%1),  %%r9 ;"
--		"sbbq  8(%2),  %%r9 ;"
--		"movq 16(%1), %%r10 ;"
--		"sbbq 16(%2), %%r10 ;"
--		"movq 24(%1), %%r11 ;"
--		"sbbq 24(%2), %%r11 ;"
--		"mov      $0, %%ecx ;"
--		"cmovc %%eax, %%ecx ;"
--		"subq %%rcx,  %%r8  ;"
--		"sbbq    $0,  %%r9  ;"
--		"movq  %%r9,  8(%0) ;"
--		"sbbq    $0, %%r10  ;"
--		"movq %%r10, 16(%0) ;"
--		"sbbq    $0, %%r11  ;"
--		"movq %%r11, 24(%0) ;"
--		"mov     $0, %%ecx  ;"
--		"cmovc %%eax, %%ecx ;"
--		"subq %%rcx,  %%r8  ;"
--		"movq  %%r8,   (%0) ;"
--		:
--		: "r"(c), "r"(a), "r"(b)
--		: "memory", "cc", "%rax", "%rcx", "%r8", "%r9", "%r10", "%r11");
--}
--
--/* Multiplication by a24 = (A+2)/4 = (486662+2)/4 = 121666 */
--static __always_inline void
--mul_a24_eltfp25519_1w(u64 *const c, const u64 *const a)
-+/* Computes p1 <- bit ? p2 : p1 in constant time */
-+static inline void cswap2(u64 bit, const u64 *p1, const u64 *p2)
- {
--	const u64 a24 = 121666;
- 	asm volatile(
--		"movq     %2, %%rdx ;"
--		"mulx   (%1),  %%r8, %%r10 ;"
--		"mulx  8(%1),  %%r9, %%r11 ;"
--		"addq %%r10,  %%r9 ;"
--		"mulx 16(%1), %%r10, %%rax ;"
--		"adcq %%r11, %%r10 ;"
--		"mulx 24(%1), %%r11, %%rcx ;"
--		"adcq %%rax, %%r11 ;"
--		/**************************/
--		"adcq    $0, %%rcx ;"
--		"movl   $38, %%edx ;" /* 2*c = 38 = 2^256 mod 2^255-19*/
--		"imul %%rdx, %%rcx ;"
--		"addq %%rcx,  %%r8 ;"
--		"adcq    $0,  %%r9 ;"
--		"movq  %%r9,  8(%0) ;"
--		"adcq    $0, %%r10 ;"
--		"movq %%r10, 16(%0) ;"
--		"adcq    $0, %%r11 ;"
--		"movq %%r11, 24(%0) ;"
--		"mov     $0, %%ecx ;"
--		"cmovc %%edx, %%ecx ;"
--		"addq %%rcx,  %%r8 ;"
--		"movq  %%r8,   (%0) ;"
--		:
--		: "r"(c), "r"(a), "r"(a24)
--		: "memory", "cc", "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10",
--		  "%r11");
--}
--
--static void inv_eltfp25519_1w_adx(u64 *const c, const u64 *const a)
--{
--	struct {
--		eltfp25519_1w_buffer buffer;
--		eltfp25519_1w x0, x1, x2;
--	} __aligned(32) m;
--	u64 *T[4];
--
--	T[0] = m.x0;
--	T[1] = c; /* x^(-1) */
--	T[2] = m.x1;
--	T[3] = m.x2;
--
--	copy_eltfp25519_1w(T[1], a);
--	sqrn_eltfp25519_1w_adx(T[1], 1);
--	copy_eltfp25519_1w(T[2], T[1]);
--	sqrn_eltfp25519_1w_adx(T[2], 2);
--	mul_eltfp25519_1w_adx(T[0], a, T[2]);
--	mul_eltfp25519_1w_adx(T[1], T[1], T[0]);
--	copy_eltfp25519_1w(T[2], T[1]);
--	sqrn_eltfp25519_1w_adx(T[2], 1);
--	mul_eltfp25519_1w_adx(T[0], T[0], T[2]);
--	copy_eltfp25519_1w(T[2], T[0]);
--	sqrn_eltfp25519_1w_adx(T[2], 5);
--	mul_eltfp25519_1w_adx(T[0], T[0], T[2]);
--	copy_eltfp25519_1w(T[2], T[0]);
--	sqrn_eltfp25519_1w_adx(T[2], 10);
--	mul_eltfp25519_1w_adx(T[2], T[2], T[0]);
--	copy_eltfp25519_1w(T[3], T[2]);
--	sqrn_eltfp25519_1w_adx(T[3], 20);
--	mul_eltfp25519_1w_adx(T[3], T[3], T[2]);
--	sqrn_eltfp25519_1w_adx(T[3], 10);
--	mul_eltfp25519_1w_adx(T[3], T[3], T[0]);
--	copy_eltfp25519_1w(T[0], T[3]);
--	sqrn_eltfp25519_1w_adx(T[0], 50);
--	mul_eltfp25519_1w_adx(T[0], T[0], T[3]);
--	copy_eltfp25519_1w(T[2], T[0]);
--	sqrn_eltfp25519_1w_adx(T[2], 100);
--	mul_eltfp25519_1w_adx(T[2], T[2], T[0]);
--	sqrn_eltfp25519_1w_adx(T[2], 50);
--	mul_eltfp25519_1w_adx(T[2], T[2], T[3]);
--	sqrn_eltfp25519_1w_adx(T[2], 5);
--	mul_eltfp25519_1w_adx(T[1], T[1], T[2]);
--
--	memzero_explicit(&m, sizeof(m));
--}
--
--static void inv_eltfp25519_1w_bmi2(u64 *const c, const u64 *const a)
--{
--	struct {
--		eltfp25519_1w_buffer buffer;
--		eltfp25519_1w x0, x1, x2;
--	} __aligned(32) m;
--	u64 *T[5];
--
--	T[0] = m.x0;
--	T[1] = c; /* x^(-1) */
--	T[2] = m.x1;
--	T[3] = m.x2;
--
--	copy_eltfp25519_1w(T[1], a);
--	sqrn_eltfp25519_1w_bmi2(T[1], 1);
--	copy_eltfp25519_1w(T[2], T[1]);
--	sqrn_eltfp25519_1w_bmi2(T[2], 2);
--	mul_eltfp25519_1w_bmi2(T[0], a, T[2]);
--	mul_eltfp25519_1w_bmi2(T[1], T[1], T[0]);
--	copy_eltfp25519_1w(T[2], T[1]);
--	sqrn_eltfp25519_1w_bmi2(T[2], 1);
--	mul_eltfp25519_1w_bmi2(T[0], T[0], T[2]);
--	copy_eltfp25519_1w(T[2], T[0]);
--	sqrn_eltfp25519_1w_bmi2(T[2], 5);
--	mul_eltfp25519_1w_bmi2(T[0], T[0], T[2]);
--	copy_eltfp25519_1w(T[2], T[0]);
--	sqrn_eltfp25519_1w_bmi2(T[2], 10);
--	mul_eltfp25519_1w_bmi2(T[2], T[2], T[0]);
--	copy_eltfp25519_1w(T[3], T[2]);
--	sqrn_eltfp25519_1w_bmi2(T[3], 20);
--	mul_eltfp25519_1w_bmi2(T[3], T[3], T[2]);
--	sqrn_eltfp25519_1w_bmi2(T[3], 10);
--	mul_eltfp25519_1w_bmi2(T[3], T[3], T[0]);
--	copy_eltfp25519_1w(T[0], T[3]);
--	sqrn_eltfp25519_1w_bmi2(T[0], 50);
--	mul_eltfp25519_1w_bmi2(T[0], T[0], T[3]);
--	copy_eltfp25519_1w(T[2], T[0]);
--	sqrn_eltfp25519_1w_bmi2(T[2], 100);
--	mul_eltfp25519_1w_bmi2(T[2], T[2], T[0]);
--	sqrn_eltfp25519_1w_bmi2(T[2], 50);
--	mul_eltfp25519_1w_bmi2(T[2], T[2], T[3]);
--	sqrn_eltfp25519_1w_bmi2(T[2], 5);
--	mul_eltfp25519_1w_bmi2(T[1], T[1], T[2]);
-+		/* Invert the polarity of bit to match cmov expectations */
-+		"  add $18446744073709551615, %0;"
- 
--	memzero_explicit(&m, sizeof(m));
-+		/* cswap p1[0], p2[0] */
-+		"  movq 0(%1), %%r8;"
-+		"  movq 0(%2), %%r9;"
-+		"  mov %%r8, %%r10;"
-+		"  cmovc %%r9, %%r8;"
-+		"  cmovc %%r10, %%r9;"
-+		"  movq %%r8, 0(%1);"
-+		"  movq %%r9, 0(%2);"
-+
-+		/* cswap p1[1], p2[1] */
-+		"  movq 8(%1), %%r8;"
-+		"  movq 8(%2), %%r9;"
-+		"  mov %%r8, %%r10;"
-+		"  cmovc %%r9, %%r8;"
-+		"  cmovc %%r10, %%r9;"
-+		"  movq %%r8, 8(%1);"
-+		"  movq %%r9, 8(%2);"
-+
-+		/* cswap p1[2], p2[2] */
-+		"  movq 16(%1), %%r8;"
-+		"  movq 16(%2), %%r9;"
-+		"  mov %%r8, %%r10;"
-+		"  cmovc %%r9, %%r8;"
-+		"  cmovc %%r10, %%r9;"
-+		"  movq %%r8, 16(%1);"
-+		"  movq %%r9, 16(%2);"
-+
-+		/* cswap p1[3], p2[3] */
-+		"  movq 24(%1), %%r8;"
-+		"  movq 24(%2), %%r9;"
-+		"  mov %%r8, %%r10;"
-+		"  cmovc %%r9, %%r8;"
-+		"  cmovc %%r10, %%r9;"
-+		"  movq %%r8, 24(%1);"
-+		"  movq %%r9, 24(%2);"
-+
-+		/* cswap p1[4], p2[4] */
-+		"  movq 32(%1), %%r8;"
-+		"  movq 32(%2), %%r9;"
-+		"  mov %%r8, %%r10;"
-+		"  cmovc %%r9, %%r8;"
-+		"  cmovc %%r10, %%r9;"
-+		"  movq %%r8, 32(%1);"
-+		"  movq %%r9, 32(%2);"
-+
-+		/* cswap p1[5], p2[5] */
-+		"  movq 40(%1), %%r8;"
-+		"  movq 40(%2), %%r9;"
-+		"  mov %%r8, %%r10;"
-+		"  cmovc %%r9, %%r8;"
-+		"  cmovc %%r10, %%r9;"
-+		"  movq %%r8, 40(%1);"
-+		"  movq %%r9, 40(%2);"
-+
-+		/* cswap p1[6], p2[6] */
-+		"  movq 48(%1), %%r8;"
-+		"  movq 48(%2), %%r9;"
-+		"  mov %%r8, %%r10;"
-+		"  cmovc %%r9, %%r8;"
-+		"  cmovc %%r10, %%r9;"
-+		"  movq %%r8, 48(%1);"
-+		"  movq %%r9, 48(%2);"
-+
-+		/* cswap p1[7], p2[7] */
-+		"  movq 56(%1), %%r8;"
-+		"  movq 56(%2), %%r9;"
-+		"  mov %%r8, %%r10;"
-+		"  cmovc %%r9, %%r8;"
-+		"  cmovc %%r10, %%r9;"
-+		"  movq %%r8, 56(%1);"
-+		"  movq %%r9, 56(%2);"
-+	: "+&r" (bit)
-+	: "r" (p1), "r" (p2)
-+	: "%r8", "%r9", "%r10", "memory", "cc"
-+	);
- }
- 
--/* Given c, a 256-bit number, fred_eltfp25519_1w updates c
-- * with a number such that 0 <= C < 2**255-19.
-- */
--static __always_inline void fred_eltfp25519_1w(u64 *const c)
-+/* Computes the square of a field element: out <- f * f
-+ * Uses the 8-element buffer tmp for intermediate results */
-+static inline void fsqr(u64 *out, const u64 *f, u64 *tmp)
- {
--	u64 tmp0 = 38, tmp1 = 19;
- 	asm volatile(
--		"btrq   $63,    %3 ;" /* Put bit 255 in carry flag and clear */
--		"cmovncl %k5,   %k4 ;" /* c[255] ? 38 : 19 */
--
--		/* Add either 19 or 38 to c */
--		"addq    %4,   %0 ;"
--		"adcq    $0,   %1 ;"
--		"adcq    $0,   %2 ;"
--		"adcq    $0,   %3 ;"
--
--		/* Test for bit 255 again; only triggered on overflow modulo 2^255-19 */
--		"movl    $0,  %k4 ;"
--		"cmovnsl %k5,  %k4 ;" /* c[255] ? 0 : 19 */
--		"btrq   $63,   %3 ;" /* Clear bit 255 */
--
--		/* Subtract 19 if necessary */
--		"subq    %4,   %0 ;"
--		"sbbq    $0,   %1 ;"
--		"sbbq    $0,   %2 ;"
--		"sbbq    $0,   %3 ;"
--
--		: "+r"(c[0]), "+r"(c[1]), "+r"(c[2]), "+r"(c[3]), "+r"(tmp0),
--		  "+r"(tmp1)
--		:
--		: "memory", "cc");
--}
-+		/* Compute the raw multiplication: tmp <- f * f */
- 
--static __always_inline void cswap(u8 bit, u64 *const px, u64 *const py)
--{
--	u64 temp;
--	asm volatile(
--		"test %9, %9 ;"
--		"movq %0, %8 ;"
--		"cmovnzq %4, %0 ;"
--		"cmovnzq %8, %4 ;"
--		"movq %1, %8 ;"
--		"cmovnzq %5, %1 ;"
--		"cmovnzq %8, %5 ;"
--		"movq %2, %8 ;"
--		"cmovnzq %6, %2 ;"
--		"cmovnzq %8, %6 ;"
--		"movq %3, %8 ;"
--		"cmovnzq %7, %3 ;"
--		"cmovnzq %8, %7 ;"
--		: "+r"(px[0]), "+r"(px[1]), "+r"(px[2]), "+r"(px[3]),
--		  "+r"(py[0]), "+r"(py[1]), "+r"(py[2]), "+r"(py[3]),
--		  "=r"(temp)
--		: "r"(bit)
--		: "cc"
-+		/* Step 1: Compute all partial products */
-+		"  movq 0(%1), %%rdx;"                                       /* f[0] */
-+		"  mulxq 8(%1), %%r8, %%r14;"      "  xor %%r15, %%r15;"     /* f[1]*f[0] */
-+		"  mulxq 16(%1), %%r9, %%r10;"     "  adcx %%r14, %%r9;"     /* f[2]*f[0] */
-+		"  mulxq 24(%1), %%rax, %%rcx;"    "  adcx %%rax, %%r10;"    /* f[3]*f[0] */
-+		"  movq 24(%1), %%rdx;"                                      /* f[3] */
-+		"  mulxq 8(%1), %%r11, %%r12;"     "  adcx %%rcx, %%r11;"    /* f[1]*f[3] */
-+		"  mulxq 16(%1), %%rax, %%r13;"    "  adcx %%rax, %%r12;"    /* f[2]*f[3] */
-+		"  movq 8(%1), %%rdx;"             "  adcx %%r15, %%r13;"    /* f1 */
-+		"  mulxq 16(%1), %%rax, %%rcx;"    "  mov $0, %%r14;"        /* f[2]*f[1] */
-+
-+		/* Step 2: Compute two parallel carry chains */
-+		"  xor %%r15, %%r15;"
-+		"  adox %%rax, %%r10;"
-+		"  adcx %%r8, %%r8;"
-+		"  adox %%rcx, %%r11;"
-+		"  adcx %%r9, %%r9;"
-+		"  adox %%r15, %%r12;"
-+		"  adcx %%r10, %%r10;"
-+		"  adox %%r15, %%r13;"
-+		"  adcx %%r11, %%r11;"
-+		"  adox %%r15, %%r14;"
-+		"  adcx %%r12, %%r12;"
-+		"  adcx %%r13, %%r13;"
-+		"  adcx %%r14, %%r14;"
-+
-+		/* Step 3: Compute intermediate squares */
-+		"  movq 0(%1), %%rdx;"     "  mulx %%rdx, %%rax, %%rcx;"    /* f[0]^2 */
-+		                           "  movq %%rax, 0(%0);"
-+		"  add %%rcx, %%r8;"       "  movq %%r8, 8(%0);"
-+		"  movq 8(%1), %%rdx;"     "  mulx %%rdx, %%rax, %%rcx;"    /* f[1]^2 */
-+		"  adcx %%rax, %%r9;"      "  movq %%r9, 16(%0);"
-+		"  adcx %%rcx, %%r10;"     "  movq %%r10, 24(%0);"
-+		"  movq 16(%1), %%rdx;"    "  mulx %%rdx, %%rax, %%rcx;"    /* f[2]^2 */
-+		"  adcx %%rax, %%r11;"     "  movq %%r11, 32(%0);"
-+		"  adcx %%rcx, %%r12;"     "  movq %%r12, 40(%0);"
-+		"  movq 24(%1), %%rdx;"    "  mulx %%rdx, %%rax, %%rcx;"    /* f[3]^2 */
-+		"  adcx %%rax, %%r13;"     "  movq %%r13, 48(%0);"
-+		"  adcx %%rcx, %%r14;"     "  movq %%r14, 56(%0);"
-+
-+		/* Line up pointers */
-+		"  mov %0, %1;"
-+		"  mov %2, %0;"
-+
-+		/* Wrap the result back into the field */
-+
-+		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
-+		"  mov $38, %%rdx;"
-+		"  mulxq 32(%1), %%r8, %%r13;"
-+		"  xor %%rcx, %%rcx;"
-+		"  adoxq 0(%1), %%r8;"
-+		"  mulxq 40(%1), %%r9, %%r12;"
-+		"  adcx %%r13, %%r9;"
-+		"  adoxq 8(%1), %%r9;"
-+		"  mulxq 48(%1), %%r10, %%r13;"
-+		"  adcx %%r12, %%r10;"
-+		"  adoxq 16(%1), %%r10;"
-+		"  mulxq 56(%1), %%r11, %%rax;"
-+		"  adcx %%r13, %%r11;"
-+		"  adoxq 24(%1), %%r11;"
-+		"  adcx %%rcx, %%rax;"
-+		"  adox %%rcx, %%rax;"
-+		"  imul %%rdx, %%rax;"
-+
-+		/* Step 2: Fold the carry back into dst */
-+		"  add %%rax, %%r8;"
-+		"  adcx %%rcx, %%r9;"
-+		"  movq %%r9, 8(%0);"
-+		"  adcx %%rcx, %%r10;"
-+		"  movq %%r10, 16(%0);"
-+		"  adcx %%rcx, %%r11;"
-+		"  movq %%r11, 24(%0);"
-+
-+		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-+		"  mov $0, %%rax;"
-+		"  cmovc %%rdx, %%rax;"
-+		"  add %%rax, %%r8;"
-+		"  movq %%r8, 0(%0);"
-+	: "+&r" (tmp), "+&r" (f), "+&r" (out)
-+	:
-+	: "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15", "memory", "cc"
- 	);
- }
- 
--static __always_inline void cselect(u8 bit, u64 *const px, const u64 *const py)
-+/* Computes two field squarings:
-+ * out[0] <- f[0] * f[0]
-+ * out[1] <- f[1] * f[1]
-+ * Uses the 16-element buffer tmp for intermediate results */
-+static inline void fsqr2(u64 *out, const u64 *f, u64 *tmp)
- {
- 	asm volatile(
--		"test %4, %4 ;"
--		"cmovnzq %5, %0 ;"
--		"cmovnzq %6, %1 ;"
--		"cmovnzq %7, %2 ;"
--		"cmovnzq %8, %3 ;"
--		: "+r"(px[0]), "+r"(px[1]), "+r"(px[2]), "+r"(px[3])
--		: "r"(bit), "rm"(py[0]), "rm"(py[1]), "rm"(py[2]), "rm"(py[3])
--		: "cc"
-+		/* Step 1: Compute all partial products */
-+		"  movq 0(%1), %%rdx;"                                       /* f[0] */
-+		"  mulxq 8(%1), %%r8, %%r14;"      "  xor %%r15, %%r15;"     /* f[1]*f[0] */
-+		"  mulxq 16(%1), %%r9, %%r10;"     "  adcx %%r14, %%r9;"     /* f[2]*f[0] */
-+		"  mulxq 24(%1), %%rax, %%rcx;"    "  adcx %%rax, %%r10;"    /* f[3]*f[0] */
-+		"  movq 24(%1), %%rdx;"                                      /* f[3] */
-+		"  mulxq 8(%1), %%r11, %%r12;"     "  adcx %%rcx, %%r11;"    /* f[1]*f[3] */
-+		"  mulxq 16(%1), %%rax, %%r13;"    "  adcx %%rax, %%r12;"    /* f[2]*f[3] */
-+		"  movq 8(%1), %%rdx;"             "  adcx %%r15, %%r13;"    /* f1 */
-+		"  mulxq 16(%1), %%rax, %%rcx;"    "  mov $0, %%r14;"        /* f[2]*f[1] */
-+
-+		/* Step 2: Compute two parallel carry chains */
-+		"  xor %%r15, %%r15;"
-+		"  adox %%rax, %%r10;"
-+		"  adcx %%r8, %%r8;"
-+		"  adox %%rcx, %%r11;"
-+		"  adcx %%r9, %%r9;"
-+		"  adox %%r15, %%r12;"
-+		"  adcx %%r10, %%r10;"
-+		"  adox %%r15, %%r13;"
-+		"  adcx %%r11, %%r11;"
-+		"  adox %%r15, %%r14;"
-+		"  adcx %%r12, %%r12;"
-+		"  adcx %%r13, %%r13;"
-+		"  adcx %%r14, %%r14;"
-+
-+		/* Step 3: Compute intermediate squares */
-+		"  movq 0(%1), %%rdx;"     "  mulx %%rdx, %%rax, %%rcx;"    /* f[0]^2 */
-+		                           "  movq %%rax, 0(%0);"
-+		"  add %%rcx, %%r8;"       "  movq %%r8, 8(%0);"
-+		"  movq 8(%1), %%rdx;"     "  mulx %%rdx, %%rax, %%rcx;"    /* f[1]^2 */
-+		"  adcx %%rax, %%r9;"      "  movq %%r9, 16(%0);"
-+		"  adcx %%rcx, %%r10;"     "  movq %%r10, 24(%0);"
-+		"  movq 16(%1), %%rdx;"    "  mulx %%rdx, %%rax, %%rcx;"    /* f[2]^2 */
-+		"  adcx %%rax, %%r11;"     "  movq %%r11, 32(%0);"
-+		"  adcx %%rcx, %%r12;"     "  movq %%r12, 40(%0);"
-+		"  movq 24(%1), %%rdx;"    "  mulx %%rdx, %%rax, %%rcx;"    /* f[3]^2 */
-+		"  adcx %%rax, %%r13;"     "  movq %%r13, 48(%0);"
-+		"  adcx %%rcx, %%r14;"     "  movq %%r14, 56(%0);"
-+
-+		/* Step 1: Compute all partial products */
-+		"  movq 32(%1), %%rdx;"                                       /* f[0] */
-+		"  mulxq 40(%1), %%r8, %%r14;"      "  xor %%r15, %%r15;"     /* f[1]*f[0] */
-+		"  mulxq 48(%1), %%r9, %%r10;"     "  adcx %%r14, %%r9;"     /* f[2]*f[0] */
-+		"  mulxq 56(%1), %%rax, %%rcx;"    "  adcx %%rax, %%r10;"    /* f[3]*f[0] */
-+		"  movq 56(%1), %%rdx;"                                      /* f[3] */
-+		"  mulxq 40(%1), %%r11, %%r12;"     "  adcx %%rcx, %%r11;"    /* f[1]*f[3] */
-+		"  mulxq 48(%1), %%rax, %%r13;"    "  adcx %%rax, %%r12;"    /* f[2]*f[3] */
-+		"  movq 40(%1), %%rdx;"             "  adcx %%r15, %%r13;"    /* f1 */
-+		"  mulxq 48(%1), %%rax, %%rcx;"    "  mov $0, %%r14;"        /* f[2]*f[1] */
-+
-+		/* Step 2: Compute two parallel carry chains */
-+		"  xor %%r15, %%r15;"
-+		"  adox %%rax, %%r10;"
-+		"  adcx %%r8, %%r8;"
-+		"  adox %%rcx, %%r11;"
-+		"  adcx %%r9, %%r9;"
-+		"  adox %%r15, %%r12;"
-+		"  adcx %%r10, %%r10;"
-+		"  adox %%r15, %%r13;"
-+		"  adcx %%r11, %%r11;"
-+		"  adox %%r15, %%r14;"
-+		"  adcx %%r12, %%r12;"
-+		"  adcx %%r13, %%r13;"
-+		"  adcx %%r14, %%r14;"
-+
-+		/* Step 3: Compute intermediate squares */
-+		"  movq 32(%1), %%rdx;"     "  mulx %%rdx, %%rax, %%rcx;"    /* f[0]^2 */
-+		                           "  movq %%rax, 64(%0);"
-+		"  add %%rcx, %%r8;"       "  movq %%r8, 72(%0);"
-+		"  movq 40(%1), %%rdx;"     "  mulx %%rdx, %%rax, %%rcx;"    /* f[1]^2 */
-+		"  adcx %%rax, %%r9;"      "  movq %%r9, 80(%0);"
-+		"  adcx %%rcx, %%r10;"     "  movq %%r10, 88(%0);"
-+		"  movq 48(%1), %%rdx;"    "  mulx %%rdx, %%rax, %%rcx;"    /* f[2]^2 */
-+		"  adcx %%rax, %%r11;"     "  movq %%r11, 96(%0);"
-+		"  adcx %%rcx, %%r12;"     "  movq %%r12, 104(%0);"
-+		"  movq 56(%1), %%rdx;"    "  mulx %%rdx, %%rax, %%rcx;"    /* f[3]^2 */
-+		"  adcx %%rax, %%r13;"     "  movq %%r13, 112(%0);"
-+		"  adcx %%rcx, %%r14;"     "  movq %%r14, 120(%0);"
-+
-+		/* Line up pointers */
-+		"  mov %0, %1;"
-+		"  mov %2, %0;"
-+
-+		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
-+		"  mov $38, %%rdx;"
-+		"  mulxq 32(%1), %%r8, %%r13;"
-+		"  xor %%rcx, %%rcx;"
-+		"  adoxq 0(%1), %%r8;"
-+		"  mulxq 40(%1), %%r9, %%r12;"
-+		"  adcx %%r13, %%r9;"
-+		"  adoxq 8(%1), %%r9;"
-+		"  mulxq 48(%1), %%r10, %%r13;"
-+		"  adcx %%r12, %%r10;"
-+		"  adoxq 16(%1), %%r10;"
-+		"  mulxq 56(%1), %%r11, %%rax;"
-+		"  adcx %%r13, %%r11;"
-+		"  adoxq 24(%1), %%r11;"
-+		"  adcx %%rcx, %%rax;"
-+		"  adox %%rcx, %%rax;"
-+		"  imul %%rdx, %%rax;"
-+
-+		/* Step 2: Fold the carry back into dst */
-+		"  add %%rax, %%r8;"
-+		"  adcx %%rcx, %%r9;"
-+		"  movq %%r9, 8(%0);"
-+		"  adcx %%rcx, %%r10;"
-+		"  movq %%r10, 16(%0);"
-+		"  adcx %%rcx, %%r11;"
-+		"  movq %%r11, 24(%0);"
-+
-+		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-+		"  mov $0, %%rax;"
-+		"  cmovc %%rdx, %%rax;"
-+		"  add %%rax, %%r8;"
-+		"  movq %%r8, 0(%0);"
-+
-+		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
-+		"  mov $38, %%rdx;"
-+		"  mulxq 96(%1), %%r8, %%r13;"
-+		"  xor %%rcx, %%rcx;"
-+		"  adoxq 64(%1), %%r8;"
-+		"  mulxq 104(%1), %%r9, %%r12;"
-+		"  adcx %%r13, %%r9;"
-+		"  adoxq 72(%1), %%r9;"
-+		"  mulxq 112(%1), %%r10, %%r13;"
-+		"  adcx %%r12, %%r10;"
-+		"  adoxq 80(%1), %%r10;"
-+		"  mulxq 120(%1), %%r11, %%rax;"
-+		"  adcx %%r13, %%r11;"
-+		"  adoxq 88(%1), %%r11;"
-+		"  adcx %%rcx, %%rax;"
-+		"  adox %%rcx, %%rax;"
-+		"  imul %%rdx, %%rax;"
-+
-+		/* Step 2: Fold the carry back into dst */
-+		"  add %%rax, %%r8;"
-+		"  adcx %%rcx, %%r9;"
-+		"  movq %%r9, 40(%0);"
-+		"  adcx %%rcx, %%r10;"
-+		"  movq %%r10, 48(%0);"
-+		"  adcx %%rcx, %%r11;"
-+		"  movq %%r11, 56(%0);"
-+
-+		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-+		"  mov $0, %%rax;"
-+		"  cmovc %%rdx, %%rax;"
-+		"  add %%rax, %%r8;"
-+		"  movq %%r8, 32(%0);"
-+	: "+&r" (tmp), "+&r" (f), "+&r" (out)
-+	:
-+	: "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15", "memory", "cc"
- 	);
- }
- 
--static void curve25519_adx(u8 shared[CURVE25519_KEY_SIZE],
--			   const u8 private_key[CURVE25519_KEY_SIZE],
--			   const u8 session_key[CURVE25519_KEY_SIZE])
--{
--	struct {
--		u64 buffer[4 * NUM_WORDS_ELTFP25519];
--		u64 coordinates[4 * NUM_WORDS_ELTFP25519];
--		u64 workspace[6 * NUM_WORDS_ELTFP25519];
--		u8 session[CURVE25519_KEY_SIZE];
--		u8 private[CURVE25519_KEY_SIZE];
--	} __aligned(32) m;
--
--	int i = 0, j = 0;
--	u64 prev = 0;
--	u64 *const X1 = (u64 *)m.session;
--	u64 *const key = (u64 *)m.private;
--	u64 *const Px = m.coordinates + 0;
--	u64 *const Pz = m.coordinates + 4;
--	u64 *const Qx = m.coordinates + 8;
--	u64 *const Qz = m.coordinates + 12;
--	u64 *const X2 = Qx;
--	u64 *const Z2 = Qz;
--	u64 *const X3 = Px;
--	u64 *const Z3 = Pz;
--	u64 *const X2Z2 = Qx;
--	u64 *const X3Z3 = Px;
--
--	u64 *const A = m.workspace + 0;
--	u64 *const B = m.workspace + 4;
--	u64 *const D = m.workspace + 8;
--	u64 *const C = m.workspace + 12;
--	u64 *const DA = m.workspace + 16;
--	u64 *const CB = m.workspace + 20;
--	u64 *const AB = A;
--	u64 *const DC = D;
--	u64 *const DACB = DA;
--
--	memcpy(m.private, private_key, sizeof(m.private));
--	memcpy(m.session, session_key, sizeof(m.session));
--
--	curve25519_clamp_secret(m.private);
--
--	/* As in the draft:
--	 * When receiving such an array, implementations of curve25519
--	 * MUST mask the most-significant bit in the final byte. This
--	 * is done to preserve compatibility with point formats which
--	 * reserve the sign bit for use in other protocols and to
--	 * increase resistance to implementation fingerprinting
--	 */
--	m.session[CURVE25519_KEY_SIZE - 1] &= (1 << (255 % 8)) - 1;
--
--	copy_eltfp25519_1w(Px, X1);
--	setzero_eltfp25519_1w(Pz);
--	setzero_eltfp25519_1w(Qx);
--	setzero_eltfp25519_1w(Qz);
--
--	Pz[0] = 1;
--	Qx[0] = 1;
--
--	/* main-loop */
--	prev = 0;
--	j = 62;
--	for (i = 3; i >= 0; --i) {
--		while (j >= 0) {
--			u64 bit = (key[i] >> j) & 0x1;
--			u64 swap = bit ^ prev;
--			prev = bit;
--
--			add_eltfp25519_1w_adx(A, X2, Z2);	/* A = (X2+Z2) */
--			sub_eltfp25519_1w(B, X2, Z2);		/* B = (X2-Z2) */
--			add_eltfp25519_1w_adx(C, X3, Z3);	/* C = (X3+Z3) */
--			sub_eltfp25519_1w(D, X3, Z3);		/* D = (X3-Z3) */
--			mul_eltfp25519_2w_adx(DACB, AB, DC);	/* [DA|CB] = [A|B]*[D|C] */
--
--			cselect(swap, A, C);
--			cselect(swap, B, D);
--
--			sqr_eltfp25519_2w_adx(AB);		/* [AA|BB] = [A^2|B^2] */
--			add_eltfp25519_1w_adx(X3, DA, CB);	/* X3 = (DA+CB) */
--			sub_eltfp25519_1w(Z3, DA, CB);		/* Z3 = (DA-CB) */
--			sqr_eltfp25519_2w_adx(X3Z3);		/* [X3|Z3] = [(DA+CB)|(DA+CB)]^2 */
--
--			copy_eltfp25519_1w(X2, B);		/* X2 = B^2 */
--			sub_eltfp25519_1w(Z2, A, B);		/* Z2 = E = AA-BB */
--
--			mul_a24_eltfp25519_1w(B, Z2);		/* B = a24*E */
--			add_eltfp25519_1w_adx(B, B, X2);	/* B = a24*E+B */
--			mul_eltfp25519_2w_adx(X2Z2, X2Z2, AB);	/* [X2|Z2] = [B|E]*[A|a24*E+B] */
--			mul_eltfp25519_1w_adx(Z3, Z3, X1);	/* Z3 = Z3*X1 */
--			--j;
--		}
--		j = 63;
--	}
--
--	inv_eltfp25519_1w_adx(A, Qz);
--	mul_eltfp25519_1w_adx((u64 *)shared, Qx, A);
--	fred_eltfp25519_1w((u64 *)shared);
--
--	memzero_explicit(&m, sizeof(m));
--}
--
--static void curve25519_adx_base(u8 session_key[CURVE25519_KEY_SIZE],
--				const u8 private_key[CURVE25519_KEY_SIZE])
-+static void point_add_and_double(u64 *q, u64 *p01_tmp1, u64 *tmp2)
- {
--	struct {
--		u64 buffer[4 * NUM_WORDS_ELTFP25519];
--		u64 coordinates[4 * NUM_WORDS_ELTFP25519];
--		u64 workspace[4 * NUM_WORDS_ELTFP25519];
--		u8 private[CURVE25519_KEY_SIZE];
--	} __aligned(32) m;
--
--	const int ite[4] = { 64, 64, 64, 63 };
--	const int q = 3;
--	u64 swap = 1;
--
--	int i = 0, j = 0, k = 0;
--	u64 *const key = (u64 *)m.private;
--	u64 *const Ur1 = m.coordinates + 0;
--	u64 *const Zr1 = m.coordinates + 4;
--	u64 *const Ur2 = m.coordinates + 8;
--	u64 *const Zr2 = m.coordinates + 12;
--
--	u64 *const UZr1 = m.coordinates + 0;
--	u64 *const ZUr2 = m.coordinates + 8;
--
--	u64 *const A = m.workspace + 0;
--	u64 *const B = m.workspace + 4;
--	u64 *const C = m.workspace + 8;
--	u64 *const D = m.workspace + 12;
--
--	u64 *const AB = m.workspace + 0;
--	u64 *const CD = m.workspace + 8;
--
--	const u64 *const P = table_ladder_8k;
--
--	memcpy(m.private, private_key, sizeof(m.private));
--
--	curve25519_clamp_secret(m.private);
--
--	setzero_eltfp25519_1w(Ur1);
--	setzero_eltfp25519_1w(Zr1);
--	setzero_eltfp25519_1w(Zr2);
--	Ur1[0] = 1;
--	Zr1[0] = 1;
--	Zr2[0] = 1;
--
--	/* G-S */
--	Ur2[3] = 0x1eaecdeee27cab34UL;
--	Ur2[2] = 0xadc7a0b9235d48e2UL;
--	Ur2[1] = 0xbbf095ae14b2edf8UL;
--	Ur2[0] = 0x7e94e1fec82faabdUL;
--
--	/* main-loop */
--	j = q;
--	for (i = 0; i < NUM_WORDS_ELTFP25519; ++i) {
--		while (j < ite[i]) {
--			u64 bit = (key[i] >> j) & 0x1;
--			k = (64 * i + j - q);
--			swap = swap ^ bit;
--			cswap(swap, Ur1, Ur2);
--			cswap(swap, Zr1, Zr2);
--			swap = bit;
--			/* Addition */
--			sub_eltfp25519_1w(B, Ur1, Zr1);		/* B = Ur1-Zr1 */
--			add_eltfp25519_1w_adx(A, Ur1, Zr1);	/* A = Ur1+Zr1 */
--			mul_eltfp25519_1w_adx(C, &P[4 * k], B);	/* C = M0-B */
--			sub_eltfp25519_1w(B, A, C);		/* B = (Ur1+Zr1) - M*(Ur1-Zr1) */
--			add_eltfp25519_1w_adx(A, A, C);		/* A = (Ur1+Zr1) + M*(Ur1-Zr1) */
--			sqr_eltfp25519_2w_adx(AB);		/* A = A^2      |  B = B^2 */
--			mul_eltfp25519_2w_adx(UZr1, ZUr2, AB);	/* Ur1 = Zr2*A  |  Zr1 = Ur2*B */
--			++j;
-+	u64 *nq = p01_tmp1;
-+	u64 *nq_p1 = p01_tmp1 + (u32)8U;
-+	u64 *tmp1 = p01_tmp1 + (u32)16U;
-+	u64 *x1 = q;
-+	u64 *x2 = nq;
-+	u64 *z2 = nq + (u32)4U;
-+	u64 *z3 = nq_p1 + (u32)4U;
-+	u64 *a = tmp1;
-+	u64 *b = tmp1 + (u32)4U;
-+	u64 *ab = tmp1;
-+	u64 *dc = tmp1 + (u32)8U;
-+	u64 *x3;
-+	u64 *z31;
-+	u64 *d0;
-+	u64 *c0;
-+	u64 *a1;
-+	u64 *b1;
-+	u64 *d;
-+	u64 *c;
-+	u64 *ab1;
-+	u64 *dc1;
-+	fadd(a, x2, z2);
-+	fsub(b, x2, z2);
-+	x3 = nq_p1;
-+	z31 = nq_p1 + (u32)4U;
-+	d0 = dc;
-+	c0 = dc + (u32)4U;
-+	fadd(c0, x3, z31);
-+	fsub(d0, x3, z31);
-+	fmul2(dc, dc, ab, tmp2);
-+	fadd(x3, d0, c0);
-+	fsub(z31, d0, c0);
-+	a1 = tmp1;
-+	b1 = tmp1 + (u32)4U;
-+	d = tmp1 + (u32)8U;
-+	c = tmp1 + (u32)12U;
-+	ab1 = tmp1;
-+	dc1 = tmp1 + (u32)8U;
-+	fsqr2(dc1, ab1, tmp2);
-+	fsqr2(nq_p1, nq_p1, tmp2);
-+	a1[0U] = c[0U];
-+	a1[1U] = c[1U];
-+	a1[2U] = c[2U];
-+	a1[3U] = c[3U];
-+	fsub(c, d, c);
-+	fmul_scalar(b1, c, (u64)121665U);
-+	fadd(b1, b1, d);
-+	fmul2(nq, dc1, ab1, tmp2);
-+	fmul(z3, z3, x1, tmp2);
-+}
-+
-+static void point_double(u64 *nq, u64 *tmp1, u64 *tmp2)
-+{
-+	u64 *x2 = nq;
-+	u64 *z2 = nq + (u32)4U;
-+	u64 *a = tmp1;
-+	u64 *b = tmp1 + (u32)4U;
-+	u64 *d = tmp1 + (u32)8U;
-+	u64 *c = tmp1 + (u32)12U;
-+	u64 *ab = tmp1;
-+	u64 *dc = tmp1 + (u32)8U;
-+	fadd(a, x2, z2);
-+	fsub(b, x2, z2);
-+	fsqr2(dc, ab, tmp2);
-+	a[0U] = c[0U];
-+	a[1U] = c[1U];
-+	a[2U] = c[2U];
-+	a[3U] = c[3U];
-+	fsub(c, d, c);
-+	fmul_scalar(b, c, (u64)121665U);
-+	fadd(b, b, d);
-+	fmul2(nq, dc, ab, tmp2);
-+}
-+
-+static void montgomery_ladder(u64 *out, const u8 *key, u64 *init1)
-+{
-+	u64 tmp2[16U] = { 0U };
-+	u64 p01_tmp1_swap[33U] = { 0U };
-+	u64 *p0 = p01_tmp1_swap;
-+	u64 *p01 = p01_tmp1_swap;
-+	u64 *p03 = p01;
-+	u64 *p11 = p01 + (u32)8U;
-+	u64 *x0;
-+	u64 *z0;
-+	u64 *p01_tmp1;
-+	u64 *p01_tmp11;
-+	u64 *nq10;
-+	u64 *nq_p11;
-+	u64 *swap1;
-+	u64 sw0;
-+	u64 *nq1;
-+	u64 *tmp1;
-+	memcpy(p11, init1, (u32)8U * sizeof(init1[0U]));
-+	x0 = p03;
-+	z0 = p03 + (u32)4U;
-+	x0[0U] = (u64)1U;
-+	x0[1U] = (u64)0U;
-+	x0[2U] = (u64)0U;
-+	x0[3U] = (u64)0U;
-+	z0[0U] = (u64)0U;
-+	z0[1U] = (u64)0U;
-+	z0[2U] = (u64)0U;
-+	z0[3U] = (u64)0U;
-+	p01_tmp1 = p01_tmp1_swap;
-+	p01_tmp11 = p01_tmp1_swap;
-+	nq10 = p01_tmp1_swap;
-+	nq_p11 = p01_tmp1_swap + (u32)8U;
-+	swap1 = p01_tmp1_swap + (u32)32U;
-+	cswap2((u64)1U, nq10, nq_p11);
-+	point_add_and_double(init1, p01_tmp11, tmp2);
-+	swap1[0U] = (u64)1U;
-+	{
-+		u32 i;
-+		for (i = (u32)0U; i < (u32)251U; i = i + (u32)1U) {
-+			u64 *p01_tmp12 = p01_tmp1_swap;
-+			u64 *swap2 = p01_tmp1_swap + (u32)32U;
-+			u64 *nq2 = p01_tmp12;
-+			u64 *nq_p12 = p01_tmp12 + (u32)8U;
-+			u64 bit = (u64)(key[((u32)253U - i) / (u32)8U] >> ((u32)253U - i) % (u32)8U & (u8)1U);
-+			u64 sw = swap2[0U] ^ bit;
-+			cswap2(sw, nq2, nq_p12);
-+			point_add_and_double(init1, p01_tmp12, tmp2);
-+			swap2[0U] = bit;
- 		}
--		j = 0;
- 	}
--
--	/* Doubling */
--	for (i = 0; i < q; ++i) {
--		add_eltfp25519_1w_adx(A, Ur1, Zr1);	/*  A = Ur1+Zr1 */
--		sub_eltfp25519_1w(B, Ur1, Zr1);		/*  B = Ur1-Zr1 */
--		sqr_eltfp25519_2w_adx(AB);		/*  A = A**2     B = B**2 */
--		copy_eltfp25519_1w(C, B);		/*  C = B */
--		sub_eltfp25519_1w(B, A, B);		/*  B = A-B */
--		mul_a24_eltfp25519_1w(D, B);		/*  D = my_a24*B */
--		add_eltfp25519_1w_adx(D, D, C);		/*  D = D+C */
--		mul_eltfp25519_2w_adx(UZr1, AB, CD);	/*  Ur1 = A*B   Zr1 = Zr1*A */
--	}
--
--	/* Convert to affine coordinates */
--	inv_eltfp25519_1w_adx(A, Zr1);
--	mul_eltfp25519_1w_adx((u64 *)session_key, Ur1, A);
--	fred_eltfp25519_1w((u64 *)session_key);
--
--	memzero_explicit(&m, sizeof(m));
--}
--
--static void curve25519_bmi2(u8 shared[CURVE25519_KEY_SIZE],
--			    const u8 private_key[CURVE25519_KEY_SIZE],
--			    const u8 session_key[CURVE25519_KEY_SIZE])
--{
--	struct {
--		u64 buffer[4 * NUM_WORDS_ELTFP25519];
--		u64 coordinates[4 * NUM_WORDS_ELTFP25519];
--		u64 workspace[6 * NUM_WORDS_ELTFP25519];
--		u8 session[CURVE25519_KEY_SIZE];
--		u8 private[CURVE25519_KEY_SIZE];
--	} __aligned(32) m;
--
--	int i = 0, j = 0;
--	u64 prev = 0;
--	u64 *const X1 = (u64 *)m.session;
--	u64 *const key = (u64 *)m.private;
--	u64 *const Px = m.coordinates + 0;
--	u64 *const Pz = m.coordinates + 4;
--	u64 *const Qx = m.coordinates + 8;
--	u64 *const Qz = m.coordinates + 12;
--	u64 *const X2 = Qx;
--	u64 *const Z2 = Qz;
--	u64 *const X3 = Px;
--	u64 *const Z3 = Pz;
--	u64 *const X2Z2 = Qx;
--	u64 *const X3Z3 = Px;
--
--	u64 *const A = m.workspace + 0;
--	u64 *const B = m.workspace + 4;
--	u64 *const D = m.workspace + 8;
--	u64 *const C = m.workspace + 12;
--	u64 *const DA = m.workspace + 16;
--	u64 *const CB = m.workspace + 20;
--	u64 *const AB = A;
--	u64 *const DC = D;
--	u64 *const DACB = DA;
--
--	memcpy(m.private, private_key, sizeof(m.private));
--	memcpy(m.session, session_key, sizeof(m.session));
--
--	curve25519_clamp_secret(m.private);
--
--	/* As in the draft:
--	 * When receiving such an array, implementations of curve25519
--	 * MUST mask the most-significant bit in the final byte. This
--	 * is done to preserve compatibility with point formats which
--	 * reserve the sign bit for use in other protocols and to
--	 * increase resistance to implementation fingerprinting
--	 */
--	m.session[CURVE25519_KEY_SIZE - 1] &= (1 << (255 % 8)) - 1;
--
--	copy_eltfp25519_1w(Px, X1);
--	setzero_eltfp25519_1w(Pz);
--	setzero_eltfp25519_1w(Qx);
--	setzero_eltfp25519_1w(Qz);
--
--	Pz[0] = 1;
--	Qx[0] = 1;
--
--	/* main-loop */
--	prev = 0;
--	j = 62;
--	for (i = 3; i >= 0; --i) {
--		while (j >= 0) {
--			u64 bit = (key[i] >> j) & 0x1;
--			u64 swap = bit ^ prev;
--			prev = bit;
--
--			add_eltfp25519_1w_bmi2(A, X2, Z2);	/* A = (X2+Z2) */
--			sub_eltfp25519_1w(B, X2, Z2);		/* B = (X2-Z2) */
--			add_eltfp25519_1w_bmi2(C, X3, Z3);	/* C = (X3+Z3) */
--			sub_eltfp25519_1w(D, X3, Z3);		/* D = (X3-Z3) */
--			mul_eltfp25519_2w_bmi2(DACB, AB, DC);	/* [DA|CB] = [A|B]*[D|C] */
--
--			cselect(swap, A, C);
--			cselect(swap, B, D);
--
--			sqr_eltfp25519_2w_bmi2(AB);		/* [AA|BB] = [A^2|B^2] */
--			add_eltfp25519_1w_bmi2(X3, DA, CB);	/* X3 = (DA+CB) */
--			sub_eltfp25519_1w(Z3, DA, CB);		/* Z3 = (DA-CB) */
--			sqr_eltfp25519_2w_bmi2(X3Z3);		/* [X3|Z3] = [(DA+CB)|(DA+CB)]^2 */
--
--			copy_eltfp25519_1w(X2, B);		/* X2 = B^2 */
--			sub_eltfp25519_1w(Z2, A, B);		/* Z2 = E = AA-BB */
--
--			mul_a24_eltfp25519_1w(B, Z2);		/* B = a24*E */
--			add_eltfp25519_1w_bmi2(B, B, X2);	/* B = a24*E+B */
--			mul_eltfp25519_2w_bmi2(X2Z2, X2Z2, AB);	/* [X2|Z2] = [B|E]*[A|a24*E+B] */
--			mul_eltfp25519_1w_bmi2(Z3, Z3, X1);	/* Z3 = Z3*X1 */
--			--j;
-+	sw0 = swap1[0U];
-+	cswap2(sw0, nq10, nq_p11);
-+	nq1 = p01_tmp1;
-+	tmp1 = p01_tmp1 + (u32)16U;
-+	point_double(nq1, tmp1, tmp2);
-+	point_double(nq1, tmp1, tmp2);
-+	point_double(nq1, tmp1, tmp2);
-+	memcpy(out, p0, (u32)8U * sizeof(p0[0U]));
-+
-+	memzero_explicit(tmp2, sizeof(tmp2));
-+	memzero_explicit(p01_tmp1_swap, sizeof(p01_tmp1_swap));
-+}
-+
-+static void fsquare_times(u64 *o, const u64 *inp, u64 *tmp, u32 n1)
-+{
-+	u32 i;
-+	fsqr(o, inp, tmp);
-+	for (i = (u32)0U; i < n1 - (u32)1U; i = i + (u32)1U)
-+		fsqr(o, o, tmp);
-+}
-+
-+static void finv(u64 *o, const u64 *i, u64 *tmp)
-+{
-+	u64 t1[16U] = { 0U };
-+	u64 *a0 = t1;
-+	u64 *b = t1 + (u32)4U;
-+	u64 *c = t1 + (u32)8U;
-+	u64 *t00 = t1 + (u32)12U;
-+	u64 *tmp1 = tmp;
-+	u64 *a;
-+	u64 *t0;
-+	fsquare_times(a0, i, tmp1, (u32)1U);
-+	fsquare_times(t00, a0, tmp1, (u32)2U);
-+	fmul(b, t00, i, tmp);
-+	fmul(a0, b, a0, tmp);
-+	fsquare_times(t00, a0, tmp1, (u32)1U);
-+	fmul(b, t00, b, tmp);
-+	fsquare_times(t00, b, tmp1, (u32)5U);
-+	fmul(b, t00, b, tmp);
-+	fsquare_times(t00, b, tmp1, (u32)10U);
-+	fmul(c, t00, b, tmp);
-+	fsquare_times(t00, c, tmp1, (u32)20U);
-+	fmul(t00, t00, c, tmp);
-+	fsquare_times(t00, t00, tmp1, (u32)10U);
-+	fmul(b, t00, b, tmp);
-+	fsquare_times(t00, b, tmp1, (u32)50U);
-+	fmul(c, t00, b, tmp);
-+	fsquare_times(t00, c, tmp1, (u32)100U);
-+	fmul(t00, t00, c, tmp);
-+	fsquare_times(t00, t00, tmp1, (u32)50U);
-+	fmul(t00, t00, b, tmp);
-+	fsquare_times(t00, t00, tmp1, (u32)5U);
-+	a = t1;
-+	t0 = t1 + (u32)12U;
-+	fmul(o, t0, a, tmp);
-+}
-+
-+static void store_felem(u64 *b, u64 *f)
-+{
-+	u64 f30 = f[3U];
-+	u64 top_bit0 = f30 >> (u32)63U;
-+	u64 carry0;
-+	u64 f31;
-+	u64 top_bit;
-+	u64 carry;
-+	u64 f0;
-+	u64 f1;
-+	u64 f2;
-+	u64 f3;
-+	u64 m0;
-+	u64 m1;
-+	u64 m2;
-+	u64 m3;
-+	u64 mask;
-+	u64 f0_;
-+	u64 f1_;
-+	u64 f2_;
-+	u64 f3_;
-+	u64 o0;
-+	u64 o1;
-+	u64 o2;
-+	u64 o3;
-+	f[3U] = f30 & (u64)0x7fffffffffffffffU;
-+	carry0 = add_scalar(f, f, (u64)19U * top_bit0);
-+	f31 = f[3U];
-+	top_bit = f31 >> (u32)63U;
-+	f[3U] = f31 & (u64)0x7fffffffffffffffU;
-+	carry = add_scalar(f, f, (u64)19U * top_bit);
-+	f0 = f[0U];
-+	f1 = f[1U];
-+	f2 = f[2U];
-+	f3 = f[3U];
-+	m0 = gte_mask(f0, (u64)0xffffffffffffffedU);
-+	m1 = eq_mask(f1, (u64)0xffffffffffffffffU);
-+	m2 = eq_mask(f2, (u64)0xffffffffffffffffU);
-+	m3 = eq_mask(f3, (u64)0x7fffffffffffffffU);
-+	mask = ((m0 & m1) & m2) & m3;
-+	f0_ = f0 - (mask & (u64)0xffffffffffffffedU);
-+	f1_ = f1 - (mask & (u64)0xffffffffffffffffU);
-+	f2_ = f2 - (mask & (u64)0xffffffffffffffffU);
-+	f3_ = f3 - (mask & (u64)0x7fffffffffffffffU);
-+	o0 = f0_;
-+	o1 = f1_;
-+	o2 = f2_;
-+	o3 = f3_;
-+	b[0U] = o0;
-+	b[1U] = o1;
-+	b[2U] = o2;
-+	b[3U] = o3;
-+}
-+
-+static void encode_point(u8 *o, const u64 *i)
-+{
-+	const u64 *x = i;
-+	const u64 *z = i + (u32)4U;
-+	u64 tmp[4U] = { 0U };
-+	u64 tmp_w[16U] = { 0U };
-+	finv(tmp, z, tmp_w);
-+	fmul(tmp, tmp, x, tmp_w);
-+	store_felem((u64 *)o, tmp);
-+}
-+
-+static void curve25519_ever64(u8 *out, const u8 *priv, const u8 *pub)
-+{
-+	u64 init1[8U] = { 0U };
-+	u64 tmp[4U] = { 0U };
-+	u64 tmp3;
-+	u64 *x;
-+	u64 *z;
-+	{
-+		u32 i;
-+		for (i = (u32)0U; i < (u32)4U; i = i + (u32)1U) {
-+			u64 *os = tmp;
-+			const u8 *bj = pub + i * (u32)8U;
-+			u64 u = *(u64 *)bj;
-+			u64 r = u;
-+			u64 x0 = r;
-+			os[i] = x0;
- 		}
--		j = 63;
- 	}
-+	tmp3 = tmp[3U];
-+	tmp[3U] = tmp3 & (u64)0x7fffffffffffffffU;
-+	x = init1;
-+	z = init1 + (u32)4U;
-+	z[0U] = (u64)1U;
-+	z[1U] = (u64)0U;
-+	z[2U] = (u64)0U;
-+	z[3U] = (u64)0U;
-+	x[0U] = tmp[0U];
-+	x[1U] = tmp[1U];
-+	x[2U] = tmp[2U];
-+	x[3U] = tmp[3U];
-+	montgomery_ladder(init1, priv, init1);
-+	encode_point(out, init1);
-+}
-+
-+/* The below constants were generated using this sage script:
-+ *
-+ * #!/usr/bin/env sage
-+ * import sys
-+ * from sage.all import *
-+ * def limbs(n):
-+ * 	n = int(n)
-+ * 	l = ((n >> 0) % 2^64, (n >> 64) % 2^64, (n >> 128) % 2^64, (n >> 192) % 2^64)
-+ * 	return "0x%016xULL, 0x%016xULL, 0x%016xULL, 0x%016xULL" % l
-+ * ec = EllipticCurve(GF(2^255 - 19), [0, 486662, 0, 1, 0])
-+ * p_minus_s = (ec.lift_x(9) - ec.lift_x(1))[0]
-+ * print("static const u64 p_minus_s[] = { %s };\n" % limbs(p_minus_s))
-+ * print("static const u64 table_ladder[] = {")
-+ * p = ec.lift_x(9)
-+ * for i in range(252):
-+ * 	l = (p[0] + p[2]) / (p[0] - p[2])
-+ * 	print(("\t%s" + ("," if i != 251 else "")) % limbs(l))
-+ * 	p = p * 2
-+ * print("};")
-+ *
-+ */
- 
--	inv_eltfp25519_1w_bmi2(A, Qz);
--	mul_eltfp25519_1w_bmi2((u64 *)shared, Qx, A);
--	fred_eltfp25519_1w((u64 *)shared);
-+static const u64 p_minus_s[] = { 0x816b1e0137d48290ULL, 0x440f6a51eb4d1207ULL, 0x52385f46dca2b71dULL, 0x215132111d8354cbULL };
- 
--	memzero_explicit(&m, sizeof(m));
--}
-+static const u64 table_ladder[] = {
-+	0xfffffffffffffff3ULL, 0xffffffffffffffffULL, 0xffffffffffffffffULL, 0x5fffffffffffffffULL,
-+	0x6b8220f416aafe96ULL, 0x82ebeb2b4f566a34ULL, 0xd5a9a5b075a5950fULL, 0x5142b2cf4b2488f4ULL,
-+	0x6aaebc750069680cULL, 0x89cf7820a0f99c41ULL, 0x2a58d9183b56d0f4ULL, 0x4b5aca80e36011a4ULL,
-+	0x329132348c29745dULL, 0xf4a2e616e1642fd7ULL, 0x1e45bb03ff67bc34ULL, 0x306912d0f42a9b4aULL,
-+	0xff886507e6af7154ULL, 0x04f50e13dfeec82fULL, 0xaa512fe82abab5ceULL, 0x174e251a68d5f222ULL,
-+	0xcf96700d82028898ULL, 0x1743e3370a2c02c5ULL, 0x379eec98b4e86eaaULL, 0x0c59888a51e0482eULL,
-+	0xfbcbf1d699b5d189ULL, 0xacaef0d58e9fdc84ULL, 0xc1c20d06231f7614ULL, 0x2938218da274f972ULL,
-+	0xf6af49beff1d7f18ULL, 0xcc541c22387ac9c2ULL, 0x96fcc9ef4015c56bULL, 0x69c1627c690913a9ULL,
-+	0x7a86fd2f4733db0eULL, 0xfdb8c4f29e087de9ULL, 0x095e4b1a8ea2a229ULL, 0x1ad7a7c829b37a79ULL,
-+	0x342d89cad17ea0c0ULL, 0x67bedda6cced2051ULL, 0x19ca31bf2bb42f74ULL, 0x3df7b4c84980acbbULL,
-+	0xa8c6444dc80ad883ULL, 0xb91e440366e3ab85ULL, 0xc215cda00164f6d8ULL, 0x3d867c6ef247e668ULL,
-+	0xc7dd582bcc3e658cULL, 0xfd2c4748ee0e5528ULL, 0xa0fd9b95cc9f4f71ULL, 0x7529d871b0675ddfULL,
-+	0xb8f568b42d3cbd78ULL, 0x1233011b91f3da82ULL, 0x2dce6ccd4a7c3b62ULL, 0x75e7fc8e9e498603ULL,
-+	0x2f4f13f1fcd0b6ecULL, 0xf1a8ca1f29ff7a45ULL, 0xc249c1a72981e29bULL, 0x6ebe0dbb8c83b56aULL,
-+	0x7114fa8d170bb222ULL, 0x65a2dcd5bf93935fULL, 0xbdc41f68b59c979aULL, 0x2f0eef79a2ce9289ULL,
-+	0x42ecbf0c083c37ceULL, 0x2930bc09ec496322ULL, 0xf294b0c19cfeac0dULL, 0x3780aa4bedfabb80ULL,
-+	0x56c17d3e7cead929ULL, 0xe7cb4beb2e5722c5ULL, 0x0ce931732dbfe15aULL, 0x41b883c7621052f8ULL,
-+	0xdbf75ca0c3d25350ULL, 0x2936be086eb1e351ULL, 0xc936e03cb4a9b212ULL, 0x1d45bf82322225aaULL,
-+	0xe81ab1036a024cc5ULL, 0xe212201c304c9a72ULL, 0xc5d73fba6832b1fcULL, 0x20ffdb5a4d839581ULL,
-+	0xa283d367be5d0fadULL, 0x6c2b25ca8b164475ULL, 0x9d4935467caaf22eULL, 0x5166408eee85ff49ULL,
-+	0x3c67baa2fab4e361ULL, 0xb3e433c67ef35cefULL, 0x5259729241159b1cULL, 0x6a621892d5b0ab33ULL,
-+	0x20b74a387555cdcbULL, 0x532aa10e1208923fULL, 0xeaa17b7762281dd1ULL, 0x61ab3443f05c44bfULL,
-+	0x257a6c422324def8ULL, 0x131c6c1017e3cf7fULL, 0x23758739f630a257ULL, 0x295a407a01a78580ULL,
-+	0xf8c443246d5da8d9ULL, 0x19d775450c52fa5dULL, 0x2afcfc92731bf83dULL, 0x7d10c8e81b2b4700ULL,
-+	0xc8e0271f70baa20bULL, 0x993748867ca63957ULL, 0x5412efb3cb7ed4bbULL, 0x3196d36173e62975ULL,
-+	0xde5bcad141c7dffcULL, 0x47cc8cd2b395c848ULL, 0xa34cd942e11af3cbULL, 0x0256dbf2d04ecec2ULL,
-+	0x875ab7e94b0e667fULL, 0xcad4dd83c0850d10ULL, 0x47f12e8f4e72c79fULL, 0x5f1a87bb8c85b19bULL,
-+	0x7ae9d0b6437f51b8ULL, 0x12c7ce5518879065ULL, 0x2ade09fe5cf77aeeULL, 0x23a05a2f7d2c5627ULL,
-+	0x5908e128f17c169aULL, 0xf77498dd8ad0852dULL, 0x74b4c4ceab102f64ULL, 0x183abadd10139845ULL,
-+	0xb165ba8daa92aaacULL, 0xd5c5ef9599386705ULL, 0xbe2f8f0cf8fc40d1ULL, 0x2701e635ee204514ULL,
-+	0x629fa80020156514ULL, 0xf223868764a8c1ceULL, 0x5b894fff0b3f060eULL, 0x60d9944cf708a3faULL,
-+	0xaeea001a1c7a201fULL, 0xebf16a633ee2ce63ULL, 0x6f7709594c7a07e1ULL, 0x79b958150d0208cbULL,
-+	0x24b55e5301d410e7ULL, 0xe3a34edff3fdc84dULL, 0xd88768e4904032d8ULL, 0x131384427b3aaeecULL,
-+	0x8405e51286234f14ULL, 0x14dc4739adb4c529ULL, 0xb8a2b5b250634ffdULL, 0x2fe2a94ad8a7ff93ULL,
-+	0xec5c57efe843faddULL, 0x2843ce40f0bb9918ULL, 0xa4b561d6cf3d6305ULL, 0x743629bde8fb777eULL,
-+	0x343edd46bbaf738fULL, 0xed981828b101a651ULL, 0xa401760b882c797aULL, 0x1fc223e28dc88730ULL,
-+	0x48604e91fc0fba0eULL, 0xb637f78f052c6fa4ULL, 0x91ccac3d09e9239cULL, 0x23f7eed4437a687cULL,
-+	0x5173b1118d9bd800ULL, 0x29d641b63189d4a7ULL, 0xfdbf177988bbc586ULL, 0x2959894fcad81df5ULL,
-+	0xaebc8ef3b4bbc899ULL, 0x4148995ab26992b9ULL, 0x24e20b0134f92cfbULL, 0x40d158894a05dee8ULL,
-+	0x46b00b1185af76f6ULL, 0x26bac77873187a79ULL, 0x3dc0bf95ab8fff5fULL, 0x2a608bd8945524d7ULL,
-+	0x26449588bd446302ULL, 0x7c4bc21c0388439cULL, 0x8e98a4f383bd11b2ULL, 0x26218d7bc9d876b9ULL,
-+	0xe3081542997c178aULL, 0x3c2d29a86fb6606fULL, 0x5c217736fa279374ULL, 0x7dde05734afeb1faULL,
-+	0x3bf10e3906d42babULL, 0xe4f7803e1980649cULL, 0xe6053bf89595bf7aULL, 0x394faf38da245530ULL,
-+	0x7a8efb58896928f4ULL, 0xfbc778e9cc6a113cULL, 0x72670ce330af596fULL, 0x48f222a81d3d6cf7ULL,
-+	0xf01fce410d72caa7ULL, 0x5a20ecc7213b5595ULL, 0x7bc21165c1fa1483ULL, 0x07f89ae31da8a741ULL,
-+	0x05d2c2b4c6830ff9ULL, 0xd43e330fc6316293ULL, 0xa5a5590a96d3a904ULL, 0x705edb91a65333b6ULL,
-+	0x048ee15e0bb9a5f7ULL, 0x3240cfca9e0aaf5dULL, 0x8f4b71ceedc4a40bULL, 0x621c0da3de544a6dULL,
-+	0x92872836a08c4091ULL, 0xce8375b010c91445ULL, 0x8a72eb524f276394ULL, 0x2667fcfa7ec83635ULL,
-+	0x7f4c173345e8752aULL, 0x061b47feee7079a5ULL, 0x25dd9afa9f86ff34ULL, 0x3780cef5425dc89cULL,
-+	0x1a46035a513bb4e9ULL, 0x3e1ef379ac575adaULL, 0xc78c5f1c5fa24b50ULL, 0x321a967634fd9f22ULL,
-+	0x946707b8826e27faULL, 0x3dca84d64c506fd0ULL, 0xc189218075e91436ULL, 0x6d9284169b3b8484ULL,
-+	0x3a67e840383f2ddfULL, 0x33eec9a30c4f9b75ULL, 0x3ec7c86fa783ef47ULL, 0x26ec449fbac9fbc4ULL,
-+	0x5c0f38cba09b9e7dULL, 0x81168cc762a3478cULL, 0x3e23b0d306fc121cULL, 0x5a238aa0a5efdcddULL,
-+	0x1ba26121c4ea43ffULL, 0x36f8c77f7c8832b5ULL, 0x88fbea0b0adcf99aULL, 0x5ca9938ec25bebf9ULL,
-+	0xd5436a5e51fccda0ULL, 0x1dbc4797c2cd893bULL, 0x19346a65d3224a08ULL, 0x0f5034e49b9af466ULL,
-+	0xf23c3967a1e0b96eULL, 0xe58b08fa867a4d88ULL, 0xfb2fabc6a7341679ULL, 0x2a75381eb6026946ULL,
-+	0xc80a3be4c19420acULL, 0x66b1f6c681f2b6dcULL, 0x7cf7036761e93388ULL, 0x25abbbd8a660a4c4ULL,
-+	0x91ea12ba14fd5198ULL, 0x684950fc4a3cffa9ULL, 0xf826842130f5ad28ULL, 0x3ea988f75301a441ULL,
-+	0xc978109a695f8c6fULL, 0x1746eb4a0530c3f3ULL, 0x444d6d77b4459995ULL, 0x75952b8c054e5cc7ULL,
-+	0xa3703f7915f4d6aaULL, 0x66c346202f2647d8ULL, 0xd01469df811d644bULL, 0x77fea47d81a5d71fULL,
-+	0xc5e9529ef57ca381ULL, 0x6eeeb4b9ce2f881aULL, 0xb6e91a28e8009bd6ULL, 0x4b80be3e9afc3fecULL,
-+	0x7e3773c526aed2c5ULL, 0x1b4afcb453c9a49dULL, 0xa920bdd7baffb24dULL, 0x7c54699f122d400eULL,
-+	0xef46c8e14fa94bc8ULL, 0xe0b074ce2952ed5eULL, 0xbea450e1dbd885d5ULL, 0x61b68649320f712cULL,
-+	0x8a485f7309ccbdd1ULL, 0xbd06320d7d4d1a2dULL, 0x25232973322dbef4ULL, 0x445dc4758c17f770ULL,
-+	0xdb0434177cc8933cULL, 0xed6fe82175ea059fULL, 0x1efebefdc053db34ULL, 0x4adbe867c65daf99ULL,
-+	0x3acd71a2a90609dfULL, 0xe5e991856dd04050ULL, 0x1ec69b688157c23cULL, 0x697427f6885cfe4dULL,
-+	0xd7be7b9b65e1a851ULL, 0xa03d28d522c536ddULL, 0x28399d658fd2b645ULL, 0x49e5b7e17c2641e1ULL,
-+	0x6f8c3a98700457a4ULL, 0x5078f0a25ebb6778ULL, 0xd13c3ccbc382960fULL, 0x2e003258a7df84b1ULL,
-+	0x8ad1f39be6296a1cULL, 0xc1eeaa652a5fbfb2ULL, 0x33ee0673fd26f3cbULL, 0x59256173a69d2cccULL,
-+	0x41ea07aa4e18fc41ULL, 0xd9fc19527c87a51eULL, 0xbdaacb805831ca6fULL, 0x445b652dc916694fULL,
-+	0xce92a3a7f2172315ULL, 0x1edc282de11b9964ULL, 0xa1823aafe04c314aULL, 0x790a2d94437cf586ULL,
-+	0x71c447fb93f6e009ULL, 0x8922a56722845276ULL, 0xbf70903b204f5169ULL, 0x2f7a89891ba319feULL,
-+	0x02a08eb577e2140cULL, 0xed9a4ed4427bdcf4ULL, 0x5253ec44e4323cd1ULL, 0x3e88363c14e9355bULL,
-+	0xaa66c14277110b8cULL, 0x1ae0391610a23390ULL, 0x2030bd12c93fc2a2ULL, 0x3ee141579555c7abULL,
-+	0x9214de3a6d6e7d41ULL, 0x3ccdd88607f17efeULL, 0x674f1288f8e11217ULL, 0x5682250f329f93d0ULL,
-+	0x6cf00b136d2e396eULL, 0x6e4cf86f1014debfULL, 0x5930b1b5bfcc4e83ULL, 0x047069b48aba16b6ULL,
-+	0x0d4ce4ab69b20793ULL, 0xb24db91a97d0fb9eULL, 0xcdfa50f54e00d01dULL, 0x221b1085368bddb5ULL,
-+	0xe7e59468b1e3d8d2ULL, 0x53c56563bd122f93ULL, 0xeee8a903e0663f09ULL, 0x61efa662cbbe3d42ULL,
-+	0x2cf8ddddde6eab2aULL, 0x9bf80ad51435f231ULL, 0x5deadacec9f04973ULL, 0x29275b5d41d29b27ULL,
-+	0xcfde0f0895ebf14fULL, 0xb9aab96b054905a7ULL, 0xcae80dd9a1c420fdULL, 0x0a63bf2f1673bbc7ULL,
-+	0x092f6e11958fbc8cULL, 0x672a81e804822fadULL, 0xcac8351560d52517ULL, 0x6f3f7722c8f192f8ULL,
-+	0xf8ba90ccc2e894b7ULL, 0x2c7557a438ff9f0dULL, 0x894d1d855ae52359ULL, 0x68e122157b743d69ULL,
-+	0xd87e5570cfb919f3ULL, 0x3f2cdecd95798db9ULL, 0x2121154710c0a2ceULL, 0x3c66a115246dc5b2ULL,
-+	0xcbedc562294ecb72ULL, 0xba7143c36a280b16ULL, 0x9610c2efd4078b67ULL, 0x6144735d946a4b1eULL,
-+	0x536f111ed75b3350ULL, 0x0211db8c2041d81bULL, 0xf93cb1000e10413cULL, 0x149dfd3c039e8876ULL,
-+	0xd479dde46b63155bULL, 0xb66e15e93c837976ULL, 0xdafde43b1f13e038ULL, 0x5fafda1a2e4b0b35ULL,
-+	0x3600bbdf17197581ULL, 0x3972050bbe3cd2c2ULL, 0x5938906dbdd5be86ULL, 0x34fce5e43f9b860fULL,
-+	0x75a8a4cd42d14d02ULL, 0x828dabc53441df65ULL, 0x33dcabedd2e131d3ULL, 0x3ebad76fb814d25fULL,
-+	0xd4906f566f70e10fULL, 0x5d12f7aa51690f5aULL, 0x45adb16e76cefcf2ULL, 0x01f768aead232999ULL,
-+	0x2b6cc77b6248febdULL, 0x3cd30628ec3aaffdULL, 0xce1c0b80d4ef486aULL, 0x4c3bff2ea6f66c23ULL,
-+	0x3f2ec4094aeaeb5fULL, 0x61b19b286e372ca7ULL, 0x5eefa966de2a701dULL, 0x23b20565de55e3efULL,
-+	0xe301ca5279d58557ULL, 0x07b2d4ce27c2874fULL, 0xa532cd8a9dcf1d67ULL, 0x2a52fee23f2bff56ULL,
-+	0x8624efb37cd8663dULL, 0xbbc7ac20ffbd7594ULL, 0x57b85e9c82d37445ULL, 0x7b3052cb86a6ec66ULL,
-+	0x3482f0ad2525e91eULL, 0x2cb68043d28edca0ULL, 0xaf4f6d052e1b003aULL, 0x185f8c2529781b0aULL,
-+	0xaa41de5bd80ce0d6ULL, 0x9407b2416853e9d6ULL, 0x563ec36e357f4c3aULL, 0x4cc4b8dd0e297bceULL,
-+	0xa2fc1a52ffb8730eULL, 0x1811f16e67058e37ULL, 0x10f9a366cddf4ee1ULL, 0x72f4a0c4a0b9f099ULL,
-+	0x8c16c06f663f4ea7ULL, 0x693b3af74e970fbaULL, 0x2102e7f1d69ec345ULL, 0x0ba53cbc968a8089ULL,
-+	0xca3d9dc7fea15537ULL, 0x4c6824bb51536493ULL, 0xb9886314844006b1ULL, 0x40d2a72ab454cc60ULL,
-+	0x5936a1b712570975ULL, 0x91b9d648debda657ULL, 0x3344094bb64330eaULL, 0x006ba10d12ee51d0ULL,
-+	0x19228468f5de5d58ULL, 0x0eb12f4c38cc05b0ULL, 0xa1039f9dd5601990ULL, 0x4502d4ce4fff0e0bULL,
-+	0xeb2054106837c189ULL, 0xd0f6544c6dd3b93cULL, 0x40727064c416d74fULL, 0x6e15c6114b502ef0ULL,
-+	0x4df2a398cfb1a76bULL, 0x11256c7419f2f6b1ULL, 0x4a497962066e6043ULL, 0x705b3aab41355b44ULL,
-+	0x365ef536d797b1d8ULL, 0x00076bd622ddf0dbULL, 0x3bbf33b0e0575a88ULL, 0x3777aa05c8e4ca4dULL,
-+	0x392745c85578db5fULL, 0x6fda4149dbae5ae2ULL, 0xb1f0b00b8adc9867ULL, 0x09963437d36f1da3ULL,
-+	0x7e824e90a5dc3853ULL, 0xccb5f6641f135cbdULL, 0x6736d86c87ce8fccULL, 0x625f3ce26604249fULL,
-+	0xaf8ac8059502f63fULL, 0x0c05e70a2e351469ULL, 0x35292e9c764b6305ULL, 0x1a394360c7e23ac3ULL,
-+	0xd5c6d53251183264ULL, 0x62065abd43c2b74fULL, 0xb5fbf5d03b973f9bULL, 0x13a3da3661206e5eULL,
-+	0xc6bd5837725d94e5ULL, 0x18e30912205016c5ULL, 0x2088ce1570033c68ULL, 0x7fba1f495c837987ULL,
-+	0x5a8c7423f2f9079dULL, 0x1735157b34023fc5ULL, 0xe4f9b49ad2fab351ULL, 0x6691ff72c878e33cULL,
-+	0x122c2adedc5eff3eULL, 0xf8dd4bf1d8956cf4ULL, 0xeb86205d9e9e5bdaULL, 0x049b92b9d975c743ULL,
-+	0xa5379730b0f6c05aULL, 0x72a0ffacc6f3a553ULL, 0xb0032c34b20dcd6dULL, 0x470e9dbc88d5164aULL,
-+	0xb19cf10ca237c047ULL, 0xb65466711f6c81a2ULL, 0xb3321bd16dd80b43ULL, 0x48c14f600c5fbe8eULL,
-+	0x66451c264aa6c803ULL, 0xb66e3904a4fa7da6ULL, 0xd45f19b0b3128395ULL, 0x31602627c3c9bc10ULL,
-+	0x3120dc4832e4e10dULL, 0xeb20c46756c717f7ULL, 0x00f52e3f67280294ULL, 0x566d4fc14730c509ULL,
-+	0x7e3a5d40fd837206ULL, 0xc1e926dc7159547aULL, 0x216730fba68d6095ULL, 0x22e8c3843f69cea7ULL,
-+	0x33d074e8930e4b2bULL, 0xb6e4350e84d15816ULL, 0x5534c26ad6ba2365ULL, 0x7773c12f89f1f3f3ULL,
-+	0x8cba404da57962aaULL, 0x5b9897a81999ce56ULL, 0x508e862f121692fcULL, 0x3a81907fa093c291ULL,
-+	0x0dded0ff4725a510ULL, 0x10d8cc10673fc503ULL, 0x5b9d151c9f1f4e89ULL, 0x32a5c1d5cb09a44cULL,
-+	0x1e0aa442b90541fbULL, 0x5f85eb7cc1b485dbULL, 0xbee595ce8a9df2e5ULL, 0x25e496c722422236ULL,
-+	0x5edf3c46cd0fe5b9ULL, 0x34e75a7ed2a43388ULL, 0xe488de11d761e352ULL, 0x0e878a01a085545cULL,
-+	0xba493c77e021bb04ULL, 0x2b4d1843c7df899aULL, 0x9ea37a487ae80d67ULL, 0x67a9958011e41794ULL,
-+	0x4b58051a6697b065ULL, 0x47e33f7d8d6ba6d4ULL, 0xbb4da8d483ca46c1ULL, 0x68becaa181c2db0dULL,
-+	0x8d8980e90b989aa5ULL, 0xf95eb14a2c93c99bULL, 0x51c6c7c4796e73a2ULL, 0x6e228363b5efb569ULL,
-+	0xc6bbc0b02dd624c8ULL, 0x777eb47dec8170eeULL, 0x3cde15a004cfafa9ULL, 0x1dc6bc087160bf9bULL,
-+	0x2e07e043eec34002ULL, 0x18e9fc677a68dc7fULL, 0xd8da03188bd15b9aULL, 0x48fbc3bb00568253ULL,
-+	0x57547d4cfb654ce1ULL, 0xd3565b82a058e2adULL, 0xf63eaf0bbf154478ULL, 0x47531ef114dfbb18ULL,
-+	0xe1ec630a4278c587ULL, 0x5507d546ca8e83f3ULL, 0x85e135c63adc0c2bULL, 0x0aa7efa85682844eULL,
-+	0x72691ba8b3e1f615ULL, 0x32b4e9701fbe3ffaULL, 0x97b6d92e39bb7868ULL, 0x2cfe53dea02e39e8ULL,
-+	0x687392cd85cd52b0ULL, 0x27ff66c910e29831ULL, 0x97134556a9832d06ULL, 0x269bb0360a84f8a0ULL,
-+	0x706e55457643f85cULL, 0x3734a48c9b597d1bULL, 0x7aee91e8c6efa472ULL, 0x5cd6abc198a9d9e0ULL,
-+	0x0e04de06cb3ce41aULL, 0xd8c6eb893402e138ULL, 0x904659bb686e3772ULL, 0x7215c371746ba8c8ULL,
-+	0xfd12a97eeae4a2d9ULL, 0x9514b7516394f2c5ULL, 0x266fd5809208f294ULL, 0x5c847085619a26b9ULL,
-+	0x52985410fed694eaULL, 0x3c905b934a2ed254ULL, 0x10bb47692d3be467ULL, 0x063b3d2d69e5e9e1ULL,
-+	0x472726eedda57debULL, 0xefb6c4ae10f41891ULL, 0x2b1641917b307614ULL, 0x117c554fc4f45b7cULL,
-+	0xc07cf3118f9d8812ULL, 0x01dbd82050017939ULL, 0xd7e803f4171b2827ULL, 0x1015e87487d225eaULL,
-+	0xc58de3fed23acc4dULL, 0x50db91c294a7be2dULL, 0x0b94d43d1c9cf457ULL, 0x6b1640fa6e37524aULL,
-+	0x692f346c5fda0d09ULL, 0x200b1c59fa4d3151ULL, 0xb8c46f760777a296ULL, 0x4b38395f3ffdfbcfULL,
-+	0x18d25e00be54d671ULL, 0x60d50582bec8aba6ULL, 0x87ad8f263b78b982ULL, 0x50fdf64e9cda0432ULL,
-+	0x90f567aac578dcf0ULL, 0xef1e9b0ef2a3133bULL, 0x0eebba9242d9de71ULL, 0x15473c9bf03101c7ULL,
-+	0x7c77e8ae56b78095ULL, 0xb678e7666e6f078eULL, 0x2da0b9615348ba1fULL, 0x7cf931c1ff733f0bULL,
-+	0x26b357f50a0a366cULL, 0xe9708cf42b87d732ULL, 0xc13aeea5f91cb2c0ULL, 0x35d90c991143bb4cULL,
-+	0x47c1c404a9a0d9dcULL, 0x659e58451972d251ULL, 0x3875a8c473b38c31ULL, 0x1fbd9ed379561f24ULL,
-+	0x11fabc6fd41ec28dULL, 0x7ef8dfe3cd2a2dcaULL, 0x72e73b5d8c404595ULL, 0x6135fa4954b72f27ULL,
-+	0xccfc32a2de24b69cULL, 0x3f55698c1f095d88ULL, 0xbe3350ed5ac3f929ULL, 0x5e9bf806ca477eebULL,
-+	0xe9ce8fb63c309f68ULL, 0x5376f63565e1f9f4ULL, 0xd1afcfb35a6393f1ULL, 0x6632a1ede5623506ULL,
-+	0x0b7d6c390c2ded4cULL, 0x56cb3281df04cb1fULL, 0x66305a1249ecc3c7ULL, 0x5d588b60a38ca72aULL,
-+	0xa6ecbf78e8e5f42dULL, 0x86eeb44b3c8a3eecULL, 0xec219c48fbd21604ULL, 0x1aaf1af517c36731ULL,
-+	0xc306a2836769bde7ULL, 0x208280622b1e2adbULL, 0x8027f51ffbff94a6ULL, 0x76cfa1ce1124f26bULL,
-+	0x18eb00562422abb6ULL, 0xf377c4d58f8c29c3ULL, 0x4dbbc207f531561aULL, 0x0253b7f082128a27ULL,
-+	0x3d1f091cb62c17e0ULL, 0x4860e1abd64628a9ULL, 0x52d17436309d4253ULL, 0x356f97e13efae576ULL,
-+	0xd351e11aa150535bULL, 0x3e6b45bb1dd878ccULL, 0x0c776128bed92c98ULL, 0x1d34ae93032885b8ULL,
-+	0x4ba0488ca85ba4c3ULL, 0x985348c33c9ce6ceULL, 0x66124c6f97bda770ULL, 0x0f81a0290654124aULL,
-+	0x9ed09ca6569b86fdULL, 0x811009fd18af9a2dULL, 0xff08d03f93d8c20aULL, 0x52a148199faef26bULL,
-+	0x3e03f9dc2d8d1b73ULL, 0x4205801873961a70ULL, 0xc0d987f041a35970ULL, 0x07aa1f15a1c0d549ULL,
-+	0xdfd46ce08cd27224ULL, 0x6d0a024f934e4239ULL, 0x808a7a6399897b59ULL, 0x0a4556e9e13d95a2ULL,
-+	0xd21a991fe9c13045ULL, 0x9b0e8548fe7751b8ULL, 0x5da643cb4bf30035ULL, 0x77db28d63940f721ULL,
-+	0xfc5eeb614adc9011ULL, 0x5229419ae8c411ebULL, 0x9ec3e7787d1dcf74ULL, 0x340d053e216e4cb5ULL,
-+	0xcac7af39b48df2b4ULL, 0xc0faec2871a10a94ULL, 0x140a69245ca575edULL, 0x0cf1c37134273a4cULL,
-+	0xc8ee306ac224b8a5ULL, 0x57eaee7ccb4930b0ULL, 0xa1e806bdaacbe74fULL, 0x7d9a62742eeb657dULL,
-+	0x9eb6b6ef546c4830ULL, 0x885cca1fddb36e2eULL, 0xe6b9f383ef0d7105ULL, 0x58654fef9d2e0412ULL,
-+	0xa905c4ffbe0e8e26ULL, 0x942de5df9b31816eULL, 0x497d723f802e88e1ULL, 0x30684dea602f408dULL,
-+	0x21e5a278a3e6cb34ULL, 0xaefb6e6f5b151dc4ULL, 0xb30b8e049d77ca15ULL, 0x28c3c9cf53b98981ULL,
-+	0x287fb721556cdd2aULL, 0x0d317ca897022274ULL, 0x7468c7423a543258ULL, 0x4a7f11464eb5642fULL,
-+	0xa237a4774d193aa6ULL, 0xd865986ea92129a1ULL, 0x24c515ecf87c1a88ULL, 0x604003575f39f5ebULL,
-+	0x47b9f189570a9b27ULL, 0x2b98cede465e4b78ULL, 0x026df551dbb85c20ULL, 0x74fcd91047e21901ULL,
-+	0x13e2a90a23c1bfa3ULL, 0x0cb0074e478519f6ULL, 0x5ff1cbbe3af6cf44ULL, 0x67fe5438be812dbeULL,
-+	0xd13cf64fa40f05b0ULL, 0x054dfb2f32283787ULL, 0x4173915b7f0d2aeaULL, 0x482f144f1f610d4eULL,
-+	0xf6210201b47f8234ULL, 0x5d0ae1929e70b990ULL, 0xdcd7f455b049567cULL, 0x7e93d0f1f0916f01ULL,
-+	0xdd79cbf18a7db4faULL, 0xbe8391bf6f74c62fULL, 0x027145d14b8291bdULL, 0x585a73ea2cbf1705ULL,
-+	0x485ca03e928a0db2ULL, 0x10fc01a5742857e7ULL, 0x2f482edbd6d551a7ULL, 0x0f0433b5048fdb8aULL,
-+	0x60da2e8dd7dc6247ULL, 0x88b4c9d38cd4819aULL, 0x13033ac001f66697ULL, 0x273b24fe3b367d75ULL,
-+	0xc6e8f66a31b3b9d4ULL, 0x281514a494df49d5ULL, 0xd1726fdfc8b23da7ULL, 0x4b3ae7d103dee548ULL,
-+	0xc6256e19ce4b9d7eULL, 0xff5c5cf186e3c61cULL, 0xacc63ca34b8ec145ULL, 0x74621888fee66574ULL,
-+	0x956f409645290a1eULL, 0xef0bf8e3263a962eULL, 0xed6a50eb5ec2647bULL, 0x0694283a9dca7502ULL,
-+	0x769b963643a2dcd1ULL, 0x42b7c8ea09fc5353ULL, 0x4f002aee13397eabULL, 0x63005e2c19b7d63aULL,
-+	0xca6736da63023beaULL, 0x966c7f6db12a99b7ULL, 0xace09390c537c5e1ULL, 0x0b696063a1aa89eeULL,
-+	0xebb03e97288c56e5ULL, 0x432a9f9f938c8be8ULL, 0xa6a5a93d5b717f71ULL, 0x1a5fb4c3e18f9d97ULL,
-+	0x1c94e7ad1c60cdceULL, 0xee202a43fc02c4a0ULL, 0x8dafe4d867c46a20ULL, 0x0a10263c8ac27b58ULL,
-+	0xd0dea9dfe4432a4aULL, 0x856af87bbe9277c5ULL, 0xce8472acc212c71aULL, 0x6f151b6d9bbb1e91ULL,
-+	0x26776c527ceed56aULL, 0x7d211cb7fbf8faecULL, 0x37ae66a6fd4609ccULL, 0x1f81b702d2770c42ULL,
-+	0x2fb0b057eac58392ULL, 0xe1dd89fe29744e9dULL, 0xc964f8eb17beb4f8ULL, 0x29571073c9a2d41eULL,
-+	0xa948a18981c0e254ULL, 0x2df6369b65b22830ULL, 0xa33eb2d75fcfd3c6ULL, 0x078cd6ec4199a01fULL,
-+	0x4a584a41ad900d2fULL, 0x32142b78e2c74c52ULL, 0x68c4e8338431c978ULL, 0x7f69ea9008689fc2ULL,
-+	0x52f2c81e46a38265ULL, 0xfd78072d04a832fdULL, 0x8cd7d5fa25359e94ULL, 0x4de71b7454cc29d2ULL,
-+	0x42eb60ad1eda6ac9ULL, 0x0aad37dfdbc09c3aULL, 0x81004b71e33cc191ULL, 0x44e6be345122803cULL,
-+	0x03fe8388ba1920dbULL, 0xf5d57c32150db008ULL, 0x49c8c4281af60c29ULL, 0x21edb518de701aeeULL,
-+	0x7fb63e418f06dc99ULL, 0xa4460d99c166d7b8ULL, 0x24dd5248ce520a83ULL, 0x5ec3ad712b928358ULL,
-+	0x15022a5fbd17930fULL, 0xa4f64a77d82570e3ULL, 0x12bc8d6915783712ULL, 0x498194c0fc620abbULL,
-+	0x38a2d9d255686c82ULL, 0x785c6bd9193e21f0ULL, 0xe4d5c81ab24a5484ULL, 0x56307860b2e20989ULL,
-+	0x429d55f78b4d74c4ULL, 0x22f1834643350131ULL, 0x1e60c24598c71fffULL, 0x59f2f014979983efULL,
-+	0x46a47d56eb494a44ULL, 0x3e22a854d636a18eULL, 0xb346e15274491c3bULL, 0x2ceafd4e5390cde7ULL,
-+	0xba8a8538be0d6675ULL, 0x4b9074bb50818e23ULL, 0xcbdab89085d304c3ULL, 0x61a24fe0e56192c4ULL,
-+	0xcb7615e6db525bcbULL, 0xdd7d8c35a567e4caULL, 0xe6b4153acafcdd69ULL, 0x2d668e097f3c9766ULL,
-+	0xa57e7e265ce55ef0ULL, 0x5d9f4e527cd4b967ULL, 0xfbc83606492fd1e5ULL, 0x090d52beb7c3f7aeULL,
-+	0x09b9515a1e7b4d7cULL, 0x1f266a2599da44c0ULL, 0xa1c49548e2c55504ULL, 0x7ef04287126f15ccULL,
-+	0xfed1659dbd30ef15ULL, 0x8b4ab9eec4e0277bULL, 0x884d6236a5df3291ULL, 0x1fd96ea6bf5cf788ULL,
-+	0x42a161981f190d9aULL, 0x61d849507e6052c1ULL, 0x9fe113bf285a2cd5ULL, 0x7c22d676dbad85d8ULL,
-+	0x82e770ed2bfbd27dULL, 0x4c05b2ece996f5a5ULL, 0xcd40a9c2b0900150ULL, 0x5895319213d9bf64ULL,
-+	0xe7cc5d703fea2e08ULL, 0xb50c491258e2188cULL, 0xcce30baa48205bf0ULL, 0x537c659ccfa32d62ULL,
-+	0x37b6623a98cfc088ULL, 0xfe9bed1fa4d6aca4ULL, 0x04d29b8e56a8d1b0ULL, 0x725f71c40b519575ULL,
-+	0x28c7f89cd0339ce6ULL, 0x8367b14469ddc18bULL, 0x883ada83a6a1652cULL, 0x585f1974034d6c17ULL,
-+	0x89cfb266f1b19188ULL, 0xe63b4863e7c35217ULL, 0xd88c9da6b4c0526aULL, 0x3e035c9df0954635ULL,
-+	0xdd9d5412fb45de9dULL, 0xdd684532e4cff40dULL, 0x4b5c999b151d671cULL, 0x2d8c2cc811e7f690ULL,
-+	0x7f54be1d90055d40ULL, 0xa464c5df464aaf40ULL, 0x33979624f0e917beULL, 0x2c018dc527356b30ULL,
-+	0xa5415024e330b3d4ULL, 0x73ff3d96691652d3ULL, 0x94ec42c4ef9b59f1ULL, 0x0747201618d08e5aULL,
-+	0x4d6ca48aca411c53ULL, 0x66415f2fcfa66119ULL, 0x9c4dd40051e227ffULL, 0x59810bc09a02f7ebULL,
-+	0x2a7eb171b3dc101dULL, 0x441c5ab99ffef68eULL, 0x32025c9b93b359eaULL, 0x5e8ce0a71e9d112fULL,
-+	0xbfcccb92429503fdULL, 0xd271ba752f095d55ULL, 0x345ead5e972d091eULL, 0x18c8df11a83103baULL,
-+	0x90cd949a9aed0f4cULL, 0xc5d1f4cb6660e37eULL, 0xb8cac52d56c52e0bULL, 0x6e42e400c5808e0dULL,
-+	0xa3b46966eeaefd23ULL, 0x0c4f1f0be39ecdcaULL, 0x189dc8c9d683a51dULL, 0x51f27f054c09351bULL,
-+	0x4c487ccd2a320682ULL, 0x587ea95bb3df1c96ULL, 0xc8ccf79e555cb8e8ULL, 0x547dc829a206d73dULL,
-+	0xb822a6cd80c39b06ULL, 0xe96d54732000d4c6ULL, 0x28535b6f91463b4dULL, 0x228f4660e2486e1dULL,
-+	0x98799538de8d3abfULL, 0x8cd8330045ebca6eULL, 0x79952a008221e738ULL, 0x4322e1a7535cd2bbULL,
-+	0xb114c11819d1801cULL, 0x2016e4d84f3f5ec7ULL, 0xdd0e2df409260f4cULL, 0x5ec362c0ae5f7266ULL,
-+	0xc0462b18b8b2b4eeULL, 0x7cc8d950274d1afbULL, 0xf25f7105436b02d2ULL, 0x43bbf8dcbff9ccd3ULL,
-+	0xb6ad1767a039e9dfULL, 0xb0714da8f69d3583ULL, 0x5e55fa18b42931f5ULL, 0x4ed5558f33c60961ULL,
-+	0x1fe37901c647a5ddULL, 0x593ddf1f8081d357ULL, 0x0249a4fd813fd7a6ULL, 0x69acca274e9caf61ULL,
-+	0x047ba3ea330721c9ULL, 0x83423fc20e7e1ea0ULL, 0x1df4c0af01314a60ULL, 0x09a62dab89289527ULL,
-+	0xa5b325a49cc6cb00ULL, 0xe94b5dc654b56cb6ULL, 0x3be28779adc994a0ULL, 0x4296e8f8ba3a4aadULL,
-+	0x328689761e451eabULL, 0x2e4d598bff59594aULL, 0x49b96853d7a7084aULL, 0x4980a319601420a8ULL,
-+	0x9565b9e12f552c42ULL, 0x8a5318db7100fe96ULL, 0x05c90b4d43add0d7ULL, 0x538b4cd66a5d4edaULL,
-+	0xf4e94fc3e89f039fULL, 0x592c9af26f618045ULL, 0x08a36eb5fd4b9550ULL, 0x25fffaf6c2ed1419ULL,
-+	0x34434459cc79d354ULL, 0xeeecbfb4b1d5476bULL, 0xddeb34a061615d99ULL, 0x5129cecceb64b773ULL,
-+	0xee43215894993520ULL, 0x772f9c7cf14c0b3bULL, 0xd2e2fce306bedad5ULL, 0x715f42b546f06a97ULL,
-+	0x434ecdceda5b5f1aULL, 0x0da17115a49741a9ULL, 0x680bd77c73edad2eULL, 0x487c02354edd9041ULL,
-+	0xb8efeff3a70ed9c4ULL, 0x56a32aa3e857e302ULL, 0xdf3a68bd48a2a5a0ULL, 0x07f650b73176c444ULL,
-+	0xe38b9b1626e0ccb1ULL, 0x79e053c18b09fb36ULL, 0x56d90319c9f94964ULL, 0x1ca941e7ac9ff5c4ULL,
-+	0x49c4df29162fa0bbULL, 0x8488cf3282b33305ULL, 0x95dfda14cabb437dULL, 0x3391f78264d5ad86ULL,
-+	0x729ae06ae2b5095dULL, 0xd58a58d73259a946ULL, 0xe9834262d13921edULL, 0x27fedafaa54bb592ULL,
-+	0xa99dc5b829ad48bbULL, 0x5f025742499ee260ULL, 0x802c8ecd5d7513fdULL, 0x78ceb3ef3f6dd938ULL,
-+	0xc342f44f8a135d94ULL, 0x7b9edb44828cdda3ULL, 0x9436d11a0537cfe7ULL, 0x5064b164ec1ab4c8ULL,
-+	0x7020eccfd37eb2fcULL, 0x1f31ea3ed90d25fcULL, 0x1b930d7bdfa1bb34ULL, 0x5344467a48113044ULL,
-+	0x70073170f25e6dfbULL, 0xe385dc1a50114cc8ULL, 0x2348698ac8fc4f00ULL, 0x2a77a55284dd40d8ULL,
-+	0xfe06afe0c98c6ce4ULL, 0xc235df96dddfd6e4ULL, 0x1428d01e33bf1ed3ULL, 0x785768ec9300bdafULL,
-+	0x9702e57a91deb63bULL, 0x61bdb8bfe5ce8b80ULL, 0x645b426f3d1d58acULL, 0x4804a82227a557bcULL,
-+	0x8e57048ab44d2601ULL, 0x68d6501a4b3a6935ULL, 0xc39c9ec3f9e1c293ULL, 0x4172f257d4de63e2ULL,
-+	0xd368b450330c6401ULL, 0x040d3017418f2391ULL, 0x2c34bb6090b7d90dULL, 0x16f649228fdfd51fULL,
-+	0xbea6818e2b928ef5ULL, 0xe28ccf91cdc11e72ULL, 0x594aaa68e77a36cdULL, 0x313034806c7ffd0fULL,
-+	0x8a9d27ac2249bd65ULL, 0x19a3b464018e9512ULL, 0xc26ccff352b37ec7ULL, 0x056f68341d797b21ULL,
-+	0x5e79d6757efd2327ULL, 0xfabdbcb6553afe15ULL, 0xd3e7222c6eaf5a60ULL, 0x7046c76d4dae743bULL,
-+	0x660be872b18d4a55ULL, 0x19992518574e1496ULL, 0xc103053a302bdcbbULL, 0x3ed8e9800b218e8eULL,
-+	0x7b0b9239fa75e03eULL, 0xefe9fb684633c083ULL, 0x98a35fbe391a7793ULL, 0x6065510fe2d0fe34ULL,
-+	0x55cb668548abad0cULL, 0xb4584548da87e527ULL, 0x2c43ecea0107c1ddULL, 0x526028809372de35ULL,
-+	0x3415c56af9213b1fULL, 0x5bee1a4d017e98dbULL, 0x13f6b105b5cf709bULL, 0x5ff20e3482b29ab6ULL,
-+	0x0aa29c75cc2e6c90ULL, 0xfc7d73ca3a70e206ULL, 0x899fc38fc4b5c515ULL, 0x250386b124ffc207ULL,
-+	0x54ea28d5ae3d2b56ULL, 0x9913149dd6de60ceULL, 0x16694fc58f06d6c1ULL, 0x46b23975eb018fc7ULL,
-+	0x470a6a0fb4b7b4e2ULL, 0x5d92475a8f7253deULL, 0xabeee5b52fbd3adbULL, 0x7fa20801a0806968ULL,
-+	0x76f3faf19f7714d2ULL, 0xb3e840c12f4660c3ULL, 0x0fb4cd8df212744eULL, 0x4b065a251d3a2dd2ULL,
-+	0x5cebde383d77cd4aULL, 0x6adf39df882c9cb1ULL, 0xa2dd242eb09af759ULL, 0x3147c0e50e5f6422ULL,
-+	0x164ca5101d1350dbULL, 0xf8d13479c33fc962ULL, 0xe640ce4d13e5da08ULL, 0x4bdee0c45061f8baULL,
-+	0xd7c46dc1a4edb1c9ULL, 0x5514d7b6437fd98aULL, 0x58942f6bb2a1c00bULL, 0x2dffb2ab1d70710eULL,
-+	0xccdfcf2fc18b6d68ULL, 0xa8ebcba8b7806167ULL, 0x980697f95e2937e3ULL, 0x02fbba1cd0126e8cULL
-+};
- 
--static void curve25519_bmi2_base(u8 session_key[CURVE25519_KEY_SIZE],
--				 const u8 private_key[CURVE25519_KEY_SIZE])
-+static void curve25519_ever64_base(u8 *out, const u8 *priv)
- {
--	struct {
--		u64 buffer[4 * NUM_WORDS_ELTFP25519];
--		u64 coordinates[4 * NUM_WORDS_ELTFP25519];
--		u64 workspace[4 * NUM_WORDS_ELTFP25519];
--		u8 private[CURVE25519_KEY_SIZE];
--	} __aligned(32) m;
--
--	const int ite[4] = { 64, 64, 64, 63 };
--	const int q = 3;
- 	u64 swap = 1;
--
--	int i = 0, j = 0, k = 0;
--	u64 *const key = (u64 *)m.private;
--	u64 *const Ur1 = m.coordinates + 0;
--	u64 *const Zr1 = m.coordinates + 4;
--	u64 *const Ur2 = m.coordinates + 8;
--	u64 *const Zr2 = m.coordinates + 12;
--
--	u64 *const UZr1 = m.coordinates + 0;
--	u64 *const ZUr2 = m.coordinates + 8;
--
--	u64 *const A = m.workspace + 0;
--	u64 *const B = m.workspace + 4;
--	u64 *const C = m.workspace + 8;
--	u64 *const D = m.workspace + 12;
--
--	u64 *const AB = m.workspace + 0;
--	u64 *const CD = m.workspace + 8;
--
--	const u64 *const P = table_ladder_8k;
--
--	memcpy(m.private, private_key, sizeof(m.private));
--
--	curve25519_clamp_secret(m.private);
--
--	setzero_eltfp25519_1w(Ur1);
--	setzero_eltfp25519_1w(Zr1);
--	setzero_eltfp25519_1w(Zr2);
--	Ur1[0] = 1;
--	Zr1[0] = 1;
--	Zr2[0] = 1;
--
--	/* G-S */
--	Ur2[3] = 0x1eaecdeee27cab34UL;
--	Ur2[2] = 0xadc7a0b9235d48e2UL;
--	Ur2[1] = 0xbbf095ae14b2edf8UL;
--	Ur2[0] = 0x7e94e1fec82faabdUL;
--
--	/* main-loop */
--	j = q;
--	for (i = 0; i < NUM_WORDS_ELTFP25519; ++i) {
--		while (j < ite[i]) {
--			u64 bit = (key[i] >> j) & 0x1;
--			k = (64 * i + j - q);
-+	int i, j, k;
-+	u64 tmp[16 + 32 + 4];
-+	u64 *x1 = &tmp[0];
-+	u64 *z1 = &tmp[4];
-+	u64 *x2 = &tmp[8];
-+	u64 *z2 = &tmp[12];
-+	u64 *xz1 = &tmp[0];
-+	u64 *xz2 = &tmp[8];
-+	u64 *a = &tmp[0 + 16];
-+	u64 *b = &tmp[4 + 16];
-+	u64 *c = &tmp[8 + 16];
-+	u64 *ab = &tmp[0 + 16];
-+	u64 *abcd = &tmp[0 + 16];
-+	u64 *ef = &tmp[16 + 16];
-+	u64 *efgh = &tmp[16 + 16];
-+	u64 *key = &tmp[0 + 16 + 32];
-+
-+	memcpy(key, priv, 32);
-+	((u8 *)key)[0] &= 248;
-+	((u8 *)key)[31] = (((u8 *)key)[31] & 127) | 64;
-+
-+	x1[0] = 1, x1[1] = x1[2] = x1[3] = 0;
-+	z1[0] = 1, z1[1] = z1[2] = z1[3] = 0;
-+	z2[0] = 1, z2[1] = z2[2] = z2[3] = 0;
-+	memcpy(x2, p_minus_s, sizeof(p_minus_s));
-+
-+	j = 3;
-+	for (i = 0; i < 4; ++i) {
-+		while (j < (const int[]){ 64, 64, 64, 63 }[i]) {
-+			u64 bit = (key[i] >> j) & 1;
-+			k = (64 * i + j - 3);
- 			swap = swap ^ bit;
--			cswap(swap, Ur1, Ur2);
--			cswap(swap, Zr1, Zr2);
-+			cswap2(swap, xz1, xz2);
- 			swap = bit;
--			/* Addition */
--			sub_eltfp25519_1w(B, Ur1, Zr1);		/* B = Ur1-Zr1 */
--			add_eltfp25519_1w_bmi2(A, Ur1, Zr1);	/* A = Ur1+Zr1 */
--			mul_eltfp25519_1w_bmi2(C, &P[4 * k], B);/* C = M0-B */
--			sub_eltfp25519_1w(B, A, C);		/* B = (Ur1+Zr1) - M*(Ur1-Zr1) */
--			add_eltfp25519_1w_bmi2(A, A, C);	/* A = (Ur1+Zr1) + M*(Ur1-Zr1) */
--			sqr_eltfp25519_2w_bmi2(AB);		/* A = A^2      |  B = B^2 */
--			mul_eltfp25519_2w_bmi2(UZr1, ZUr2, AB);	/* Ur1 = Zr2*A  |  Zr1 = Ur2*B */
-+			fsub(b, x1, z1);
-+			fadd(a, x1, z1);
-+			fmul(c, &table_ladder[4 * k], b, ef);
-+			fsub(b, a, c);
-+			fadd(a, a, c);
-+			fsqr2(ab, ab, efgh);
-+			fmul2(xz1, xz2, ab, efgh);
- 			++j;
- 		}
- 		j = 0;
- 	}
- 
--	/* Doubling */
--	for (i = 0; i < q; ++i) {
--		add_eltfp25519_1w_bmi2(A, Ur1, Zr1);	/*  A = Ur1+Zr1 */
--		sub_eltfp25519_1w(B, Ur1, Zr1);		/*  B = Ur1-Zr1 */
--		sqr_eltfp25519_2w_bmi2(AB);		/*  A = A**2     B = B**2 */
--		copy_eltfp25519_1w(C, B);		/*  C = B */
--		sub_eltfp25519_1w(B, A, B);		/*  B = A-B */
--		mul_a24_eltfp25519_1w(D, B);		/*  D = my_a24*B */
--		add_eltfp25519_1w_bmi2(D, D, C);	/*  D = D+C */
--		mul_eltfp25519_2w_bmi2(UZr1, AB, CD);	/*  Ur1 = A*B   Zr1 = Zr1*A */
--	}
--
--	/* Convert to affine coordinates */
--	inv_eltfp25519_1w_bmi2(A, Zr1);
--	mul_eltfp25519_1w_bmi2((u64 *)session_key, Ur1, A);
--	fred_eltfp25519_1w((u64 *)session_key);
-+	point_double(xz1, abcd, efgh);
-+	point_double(xz1, abcd, efgh);
-+	point_double(xz1, abcd, efgh);
-+	encode_point(out, xz1);
- 
--	memzero_explicit(&m, sizeof(m));
-+	memzero_explicit(tmp, sizeof(tmp));
- }
- 
-+static __ro_after_init DEFINE_STATIC_KEY_FALSE(curve25519_use_bmi2_adx);
-+
- void curve25519_arch(u8 mypublic[CURVE25519_KEY_SIZE],
- 		     const u8 secret[CURVE25519_KEY_SIZE],
- 		     const u8 basepoint[CURVE25519_KEY_SIZE])
- {
--	if (static_branch_likely(&curve25519_use_adx))
--		curve25519_adx(mypublic, secret, basepoint);
--	else if (static_branch_likely(&curve25519_use_bmi2))
--		curve25519_bmi2(mypublic, secret, basepoint);
-+	if (static_branch_likely(&curve25519_use_bmi2_adx))
-+		curve25519_ever64(mypublic, secret, basepoint);
- 	else
- 		curve25519_generic(mypublic, secret, basepoint);
- }
-@@ -2355,10 +1395,8 @@ EXPORT_SYMBOL(curve25519_arch);
- void curve25519_base_arch(u8 pub[CURVE25519_KEY_SIZE],
- 			  const u8 secret[CURVE25519_KEY_SIZE])
- {
--	if (static_branch_likely(&curve25519_use_adx))
--		curve25519_adx_base(pub, secret);
--	else if (static_branch_likely(&curve25519_use_bmi2))
--		curve25519_bmi2_base(pub, secret);
-+	if (static_branch_likely(&curve25519_use_bmi2_adx))
-+		curve25519_ever64_base(pub, secret);
- 	else
- 		curve25519_generic(pub, secret, curve25519_base_point);
- }
-@@ -2449,12 +1487,11 @@ static struct kpp_alg curve25519_alg = {
- 	.max_size		= curve25519_max_size,
- };
- 
-+
- static int __init curve25519_mod_init(void)
- {
--	if (boot_cpu_has(X86_FEATURE_BMI2))
--		static_branch_enable(&curve25519_use_bmi2);
--	else if (boot_cpu_has(X86_FEATURE_ADX))
--		static_branch_enable(&curve25519_use_adx);
-+	if (boot_cpu_has(X86_FEATURE_BMI2) && boot_cpu_has(X86_FEATURE_ADX))
-+		static_branch_enable(&curve25519_use_bmi2_adx);
- 	else
- 		return 0;
- 	return IS_REACHABLE(CONFIG_CRYPTO_KPP) ?
-@@ -2474,3 +1511,4 @@ module_exit(curve25519_mod_exit);
- MODULE_ALIAS_CRYPTO("curve25519");
- MODULE_ALIAS_CRYPTO("curve25519-x86");
- MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0055-crypto-x86-curve25519-leave-r12-as-spare-register.patch b/target/linux/generic/backport-5.4/080-wireguard-0055-crypto-x86-curve25519-leave-r12-as-spare-register.patch
deleted file mode 100644
index d5b11e0d36..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0055-crypto-x86-curve25519-leave-r12-as-spare-register.patch
+++ /dev/null
@@ -1,376 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Sun, 1 Mar 2020 16:06:56 +0800
-Subject: [PATCH] crypto: x86/curve25519 - leave r12 as spare register
-
-commit dc7fc3a53ae158263196b1892b672aedf67796c5 upstream.
-
-This updates to the newer register selection proved by HACL*, which
-leads to a more compact instruction encoding, and saves around 100
-cycles.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/curve25519-x86_64.c | 110 ++++++++++++++--------------
- 1 file changed, 55 insertions(+), 55 deletions(-)
-
---- a/arch/x86/crypto/curve25519-x86_64.c
-+++ b/arch/x86/crypto/curve25519-x86_64.c
-@@ -167,28 +167,28 @@ static inline void fmul(u64 *out, const
- 		"  movq 0(%1), %%rdx;"
- 		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  movq %%r8, 0(%0);"
- 		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  movq %%r10, 8(%0);"
--		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"
-+		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"
- 		/* Compute src1[1] * src2 */
- 		"  movq 8(%1), %%rdx;"
- 		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  adcxq 8(%0), %%r8;"    "  movq %%r8, 8(%0);"
--		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 16(%0);"
--		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  mov $0, %%r8;"
-+		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 16(%0);"
-+		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  mov $0, %%r8;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
- 		/* Compute src1[2] * src2 */
- 		"  movq 16(%1), %%rdx;"
- 		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 16(%0), %%r8;"    "  movq %%r8, 16(%0);"
--		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 24(%0);"
--		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  mov $0, %%r8;"
-+		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 24(%0);"
-+		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  mov $0, %%r8;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
- 		/* Compute src1[3] * src2 */
- 		"  movq 24(%1), %%rdx;"
- 		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 24(%0), %%r8;"    "  movq %%r8, 24(%0);"
--		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 32(%0);"
--		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  movq %%r12, 40(%0);"    "  mov $0, %%r8;"
-+		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 32(%0);"
-+		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  movq %%rbx, 40(%0);"    "  mov $0, %%r8;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  movq %%r14, 48(%0);"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"     "  movq %%rax, 56(%0);"
- 		/* Line up pointers */
-@@ -202,11 +202,11 @@ static inline void fmul(u64 *out, const
- 		"  mulxq 32(%1), %%r8, %%r13;"
- 		"  xor %3, %3;"
- 		"  adoxq 0(%1), %%r8;"
--		"  mulxq 40(%1), %%r9, %%r12;"
-+		"  mulxq 40(%1), %%r9, %%rbx;"
- 		"  adcx %%r13, %%r9;"
- 		"  adoxq 8(%1), %%r9;"
- 		"  mulxq 48(%1), %%r10, %%r13;"
--		"  adcx %%r12, %%r10;"
-+		"  adcx %%rbx, %%r10;"
- 		"  adoxq 16(%1), %%r10;"
- 		"  mulxq 56(%1), %%r11, %%rax;"
- 		"  adcx %%r13, %%r11;"
-@@ -231,7 +231,7 @@ static inline void fmul(u64 *out, const
- 		"  movq %%r8, 0(%0);"
- 	: "+&r" (tmp), "+&r" (f1), "+&r" (out), "+&r" (f2)
- 	:
--	: "%rax", "%rdx", "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "memory", "cc"
-+	: "%rax", "%rdx", "%r8", "%r9", "%r10", "%r11", "%rbx", "%r13", "%r14", "memory", "cc"
- 	);
- }
- 
-@@ -248,28 +248,28 @@ static inline void fmul2(u64 *out, const
- 		"  movq 0(%1), %%rdx;"
- 		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  movq %%r8, 0(%0);"
- 		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  movq %%r10, 8(%0);"
--		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"
-+		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"
- 		/* Compute src1[1] * src2 */
- 		"  movq 8(%1), %%rdx;"
- 		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  adcxq 8(%0), %%r8;"    "  movq %%r8, 8(%0);"
--		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 16(%0);"
--		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  mov $0, %%r8;"
-+		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 16(%0);"
-+		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  mov $0, %%r8;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
- 		/* Compute src1[2] * src2 */
- 		"  movq 16(%1), %%rdx;"
- 		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 16(%0), %%r8;"    "  movq %%r8, 16(%0);"
--		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 24(%0);"
--		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  mov $0, %%r8;"
-+		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 24(%0);"
-+		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  mov $0, %%r8;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
- 		/* Compute src1[3] * src2 */
- 		"  movq 24(%1), %%rdx;"
- 		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 24(%0), %%r8;"    "  movq %%r8, 24(%0);"
--		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 32(%0);"
--		"  mulxq 16(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  movq %%r12, 40(%0);"    "  mov $0, %%r8;"
-+		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 32(%0);"
-+		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  movq %%rbx, 40(%0);"    "  mov $0, %%r8;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  movq %%r14, 48(%0);"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"     "  movq %%rax, 56(%0);"
- 
-@@ -279,28 +279,28 @@ static inline void fmul2(u64 *out, const
- 		"  movq 32(%1), %%rdx;"
- 		"  mulxq 32(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  movq %%r8, 64(%0);"
- 		"  mulxq 40(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  movq %%r10, 72(%0);"
--		"  mulxq 48(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"
-+		"  mulxq 48(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"
- 		"  mulxq 56(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"
- 		/* Compute src1[1] * src2 */
- 		"  movq 40(%1), %%rdx;"
- 		"  mulxq 32(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  adcxq 72(%0), %%r8;"    "  movq %%r8, 72(%0);"
--		"  mulxq 40(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 80(%0);"
--		"  mulxq 48(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  mov $0, %%r8;"
-+		"  mulxq 40(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 80(%0);"
-+		"  mulxq 48(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  mov $0, %%r8;"
- 		"  mulxq 56(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
- 		/* Compute src1[2] * src2 */
- 		"  movq 48(%1), %%rdx;"
- 		"  mulxq 32(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 80(%0), %%r8;"    "  movq %%r8, 80(%0);"
--		"  mulxq 40(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 88(%0);"
--		"  mulxq 48(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  mov $0, %%r8;"
-+		"  mulxq 40(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 88(%0);"
-+		"  mulxq 48(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  mov $0, %%r8;"
- 		"  mulxq 56(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
- 		/* Compute src1[3] * src2 */
- 		"  movq 56(%1), %%rdx;"
- 		"  mulxq 32(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 88(%0), %%r8;"    "  movq %%r8, 88(%0);"
--		"  mulxq 40(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%r12, %%r10;"    "  movq %%r10, 96(%0);"
--		"  mulxq 48(%3), %%r12, %%r13;"    "  adox %%r11, %%r12;"    "  adcx %%r14, %%r12;"    "  movq %%r12, 104(%0);"    "  mov $0, %%r8;"
-+		"  mulxq 40(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 96(%0);"
-+		"  mulxq 48(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  movq %%rbx, 104(%0);"    "  mov $0, %%r8;"
- 		"  mulxq 56(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  movq %%r14, 112(%0);"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"     "  movq %%rax, 120(%0);"
- 		/* Line up pointers */
-@@ -314,11 +314,11 @@ static inline void fmul2(u64 *out, const
- 		"  mulxq 32(%1), %%r8, %%r13;"
- 		"  xor %3, %3;"
- 		"  adoxq 0(%1), %%r8;"
--		"  mulxq 40(%1), %%r9, %%r12;"
-+		"  mulxq 40(%1), %%r9, %%rbx;"
- 		"  adcx %%r13, %%r9;"
- 		"  adoxq 8(%1), %%r9;"
- 		"  mulxq 48(%1), %%r10, %%r13;"
--		"  adcx %%r12, %%r10;"
-+		"  adcx %%rbx, %%r10;"
- 		"  adoxq 16(%1), %%r10;"
- 		"  mulxq 56(%1), %%r11, %%rax;"
- 		"  adcx %%r13, %%r11;"
-@@ -347,11 +347,11 @@ static inline void fmul2(u64 *out, const
- 		"  mulxq 96(%1), %%r8, %%r13;"
- 		"  xor %3, %3;"
- 		"  adoxq 64(%1), %%r8;"
--		"  mulxq 104(%1), %%r9, %%r12;"
-+		"  mulxq 104(%1), %%r9, %%rbx;"
- 		"  adcx %%r13, %%r9;"
- 		"  adoxq 72(%1), %%r9;"
- 		"  mulxq 112(%1), %%r10, %%r13;"
--		"  adcx %%r12, %%r10;"
-+		"  adcx %%rbx, %%r10;"
- 		"  adoxq 80(%1), %%r10;"
- 		"  mulxq 120(%1), %%r11, %%rax;"
- 		"  adcx %%r13, %%r11;"
-@@ -376,7 +376,7 @@ static inline void fmul2(u64 *out, const
- 		"  movq %%r8, 32(%0);"
- 	: "+&r" (tmp), "+&r" (f1), "+&r" (out), "+&r" (f2)
- 	:
--	: "%rax", "%rdx", "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "memory", "cc"
-+	: "%rax", "%rdx", "%r8", "%r9", "%r10", "%r11", "%rbx", "%r13", "%r14", "memory", "cc"
- 	);
- }
- 
-@@ -388,11 +388,11 @@ static inline void fmul_scalar(u64 *out,
- 	asm volatile(
- 		/* Compute the raw multiplication of f1*f2 */
- 		"  mulxq 0(%2), %%r8, %%rcx;"      /* f1[0]*f2 */
--		"  mulxq 8(%2), %%r9, %%r12;"      /* f1[1]*f2 */
-+		"  mulxq 8(%2), %%r9, %%rbx;"      /* f1[1]*f2 */
- 		"  add %%rcx, %%r9;"
- 		"  mov $0, %%rcx;"
- 		"  mulxq 16(%2), %%r10, %%r13;"    /* f1[2]*f2 */
--		"  adcx %%r12, %%r10;"
-+		"  adcx %%rbx, %%r10;"
- 		"  mulxq 24(%2), %%r11, %%rax;"    /* f1[3]*f2 */
- 		"  adcx %%r13, %%r11;"
- 		"  adcx %%rcx, %%rax;"
-@@ -419,7 +419,7 @@ static inline void fmul_scalar(u64 *out,
- 		"  movq %%r8, 0(%1);"
- 	: "+&r" (f2_r)
- 	: "r" (out), "r" (f1)
--	: "%rax", "%rcx", "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "memory", "cc"
-+	: "%rax", "%rcx", "%r8", "%r9", "%r10", "%r11", "%rbx", "%r13", "memory", "cc"
- 	);
- }
- 
-@@ -520,8 +520,8 @@ static inline void fsqr(u64 *out, const
- 		"  mulxq 16(%1), %%r9, %%r10;"     "  adcx %%r14, %%r9;"     /* f[2]*f[0] */
- 		"  mulxq 24(%1), %%rax, %%rcx;"    "  adcx %%rax, %%r10;"    /* f[3]*f[0] */
- 		"  movq 24(%1), %%rdx;"                                      /* f[3] */
--		"  mulxq 8(%1), %%r11, %%r12;"     "  adcx %%rcx, %%r11;"    /* f[1]*f[3] */
--		"  mulxq 16(%1), %%rax, %%r13;"    "  adcx %%rax, %%r12;"    /* f[2]*f[3] */
-+		"  mulxq 8(%1), %%r11, %%rbx;"     "  adcx %%rcx, %%r11;"    /* f[1]*f[3] */
-+		"  mulxq 16(%1), %%rax, %%r13;"    "  adcx %%rax, %%rbx;"    /* f[2]*f[3] */
- 		"  movq 8(%1), %%rdx;"             "  adcx %%r15, %%r13;"    /* f1 */
- 		"  mulxq 16(%1), %%rax, %%rcx;"    "  mov $0, %%r14;"        /* f[2]*f[1] */
- 
-@@ -531,12 +531,12 @@ static inline void fsqr(u64 *out, const
- 		"  adcx %%r8, %%r8;"
- 		"  adox %%rcx, %%r11;"
- 		"  adcx %%r9, %%r9;"
--		"  adox %%r15, %%r12;"
-+		"  adox %%r15, %%rbx;"
- 		"  adcx %%r10, %%r10;"
- 		"  adox %%r15, %%r13;"
- 		"  adcx %%r11, %%r11;"
- 		"  adox %%r15, %%r14;"
--		"  adcx %%r12, %%r12;"
-+		"  adcx %%rbx, %%rbx;"
- 		"  adcx %%r13, %%r13;"
- 		"  adcx %%r14, %%r14;"
- 
-@@ -549,7 +549,7 @@ static inline void fsqr(u64 *out, const
- 		"  adcx %%rcx, %%r10;"     "  movq %%r10, 24(%0);"
- 		"  movq 16(%1), %%rdx;"    "  mulx %%rdx, %%rax, %%rcx;"    /* f[2]^2 */
- 		"  adcx %%rax, %%r11;"     "  movq %%r11, 32(%0);"
--		"  adcx %%rcx, %%r12;"     "  movq %%r12, 40(%0);"
-+		"  adcx %%rcx, %%rbx;"     "  movq %%rbx, 40(%0);"
- 		"  movq 24(%1), %%rdx;"    "  mulx %%rdx, %%rax, %%rcx;"    /* f[3]^2 */
- 		"  adcx %%rax, %%r13;"     "  movq %%r13, 48(%0);"
- 		"  adcx %%rcx, %%r14;"     "  movq %%r14, 56(%0);"
-@@ -565,11 +565,11 @@ static inline void fsqr(u64 *out, const
- 		"  mulxq 32(%1), %%r8, %%r13;"
- 		"  xor %%rcx, %%rcx;"
- 		"  adoxq 0(%1), %%r8;"
--		"  mulxq 40(%1), %%r9, %%r12;"
-+		"  mulxq 40(%1), %%r9, %%rbx;"
- 		"  adcx %%r13, %%r9;"
- 		"  adoxq 8(%1), %%r9;"
- 		"  mulxq 48(%1), %%r10, %%r13;"
--		"  adcx %%r12, %%r10;"
-+		"  adcx %%rbx, %%r10;"
- 		"  adoxq 16(%1), %%r10;"
- 		"  mulxq 56(%1), %%r11, %%rax;"
- 		"  adcx %%r13, %%r11;"
-@@ -594,7 +594,7 @@ static inline void fsqr(u64 *out, const
- 		"  movq %%r8, 0(%0);"
- 	: "+&r" (tmp), "+&r" (f), "+&r" (out)
- 	:
--	: "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15", "memory", "cc"
-+	: "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10", "%r11", "%rbx", "%r13", "%r14", "%r15", "memory", "cc"
- 	);
- }
- 
-@@ -611,8 +611,8 @@ static inline void fsqr2(u64 *out, const
- 		"  mulxq 16(%1), %%r9, %%r10;"     "  adcx %%r14, %%r9;"     /* f[2]*f[0] */
- 		"  mulxq 24(%1), %%rax, %%rcx;"    "  adcx %%rax, %%r10;"    /* f[3]*f[0] */
- 		"  movq 24(%1), %%rdx;"                                      /* f[3] */
--		"  mulxq 8(%1), %%r11, %%r12;"     "  adcx %%rcx, %%r11;"    /* f[1]*f[3] */
--		"  mulxq 16(%1), %%rax, %%r13;"    "  adcx %%rax, %%r12;"    /* f[2]*f[3] */
-+		"  mulxq 8(%1), %%r11, %%rbx;"     "  adcx %%rcx, %%r11;"    /* f[1]*f[3] */
-+		"  mulxq 16(%1), %%rax, %%r13;"    "  adcx %%rax, %%rbx;"    /* f[2]*f[3] */
- 		"  movq 8(%1), %%rdx;"             "  adcx %%r15, %%r13;"    /* f1 */
- 		"  mulxq 16(%1), %%rax, %%rcx;"    "  mov $0, %%r14;"        /* f[2]*f[1] */
- 
-@@ -622,12 +622,12 @@ static inline void fsqr2(u64 *out, const
- 		"  adcx %%r8, %%r8;"
- 		"  adox %%rcx, %%r11;"
- 		"  adcx %%r9, %%r9;"
--		"  adox %%r15, %%r12;"
-+		"  adox %%r15, %%rbx;"
- 		"  adcx %%r10, %%r10;"
- 		"  adox %%r15, %%r13;"
- 		"  adcx %%r11, %%r11;"
- 		"  adox %%r15, %%r14;"
--		"  adcx %%r12, %%r12;"
-+		"  adcx %%rbx, %%rbx;"
- 		"  adcx %%r13, %%r13;"
- 		"  adcx %%r14, %%r14;"
- 
-@@ -640,7 +640,7 @@ static inline void fsqr2(u64 *out, const
- 		"  adcx %%rcx, %%r10;"     "  movq %%r10, 24(%0);"
- 		"  movq 16(%1), %%rdx;"    "  mulx %%rdx, %%rax, %%rcx;"    /* f[2]^2 */
- 		"  adcx %%rax, %%r11;"     "  movq %%r11, 32(%0);"
--		"  adcx %%rcx, %%r12;"     "  movq %%r12, 40(%0);"
-+		"  adcx %%rcx, %%rbx;"     "  movq %%rbx, 40(%0);"
- 		"  movq 24(%1), %%rdx;"    "  mulx %%rdx, %%rax, %%rcx;"    /* f[3]^2 */
- 		"  adcx %%rax, %%r13;"     "  movq %%r13, 48(%0);"
- 		"  adcx %%rcx, %%r14;"     "  movq %%r14, 56(%0);"
-@@ -651,8 +651,8 @@ static inline void fsqr2(u64 *out, const
- 		"  mulxq 48(%1), %%r9, %%r10;"     "  adcx %%r14, %%r9;"     /* f[2]*f[0] */
- 		"  mulxq 56(%1), %%rax, %%rcx;"    "  adcx %%rax, %%r10;"    /* f[3]*f[0] */
- 		"  movq 56(%1), %%rdx;"                                      /* f[3] */
--		"  mulxq 40(%1), %%r11, %%r12;"     "  adcx %%rcx, %%r11;"    /* f[1]*f[3] */
--		"  mulxq 48(%1), %%rax, %%r13;"    "  adcx %%rax, %%r12;"    /* f[2]*f[3] */
-+		"  mulxq 40(%1), %%r11, %%rbx;"     "  adcx %%rcx, %%r11;"    /* f[1]*f[3] */
-+		"  mulxq 48(%1), %%rax, %%r13;"    "  adcx %%rax, %%rbx;"    /* f[2]*f[3] */
- 		"  movq 40(%1), %%rdx;"             "  adcx %%r15, %%r13;"    /* f1 */
- 		"  mulxq 48(%1), %%rax, %%rcx;"    "  mov $0, %%r14;"        /* f[2]*f[1] */
- 
-@@ -662,12 +662,12 @@ static inline void fsqr2(u64 *out, const
- 		"  adcx %%r8, %%r8;"
- 		"  adox %%rcx, %%r11;"
- 		"  adcx %%r9, %%r9;"
--		"  adox %%r15, %%r12;"
-+		"  adox %%r15, %%rbx;"
- 		"  adcx %%r10, %%r10;"
- 		"  adox %%r15, %%r13;"
- 		"  adcx %%r11, %%r11;"
- 		"  adox %%r15, %%r14;"
--		"  adcx %%r12, %%r12;"
-+		"  adcx %%rbx, %%rbx;"
- 		"  adcx %%r13, %%r13;"
- 		"  adcx %%r14, %%r14;"
- 
-@@ -680,7 +680,7 @@ static inline void fsqr2(u64 *out, const
- 		"  adcx %%rcx, %%r10;"     "  movq %%r10, 88(%0);"
- 		"  movq 48(%1), %%rdx;"    "  mulx %%rdx, %%rax, %%rcx;"    /* f[2]^2 */
- 		"  adcx %%rax, %%r11;"     "  movq %%r11, 96(%0);"
--		"  adcx %%rcx, %%r12;"     "  movq %%r12, 104(%0);"
-+		"  adcx %%rcx, %%rbx;"     "  movq %%rbx, 104(%0);"
- 		"  movq 56(%1), %%rdx;"    "  mulx %%rdx, %%rax, %%rcx;"    /* f[3]^2 */
- 		"  adcx %%rax, %%r13;"     "  movq %%r13, 112(%0);"
- 		"  adcx %%rcx, %%r14;"     "  movq %%r14, 120(%0);"
-@@ -694,11 +694,11 @@ static inline void fsqr2(u64 *out, const
- 		"  mulxq 32(%1), %%r8, %%r13;"
- 		"  xor %%rcx, %%rcx;"
- 		"  adoxq 0(%1), %%r8;"
--		"  mulxq 40(%1), %%r9, %%r12;"
-+		"  mulxq 40(%1), %%r9, %%rbx;"
- 		"  adcx %%r13, %%r9;"
- 		"  adoxq 8(%1), %%r9;"
- 		"  mulxq 48(%1), %%r10, %%r13;"
--		"  adcx %%r12, %%r10;"
-+		"  adcx %%rbx, %%r10;"
- 		"  adoxq 16(%1), %%r10;"
- 		"  mulxq 56(%1), %%r11, %%rax;"
- 		"  adcx %%r13, %%r11;"
-@@ -727,11 +727,11 @@ static inline void fsqr2(u64 *out, const
- 		"  mulxq 96(%1), %%r8, %%r13;"
- 		"  xor %%rcx, %%rcx;"
- 		"  adoxq 64(%1), %%r8;"
--		"  mulxq 104(%1), %%r9, %%r12;"
-+		"  mulxq 104(%1), %%r9, %%rbx;"
- 		"  adcx %%r13, %%r9;"
- 		"  adoxq 72(%1), %%r9;"
- 		"  mulxq 112(%1), %%r10, %%r13;"
--		"  adcx %%r12, %%r10;"
-+		"  adcx %%rbx, %%r10;"
- 		"  adoxq 80(%1), %%r10;"
- 		"  mulxq 120(%1), %%r11, %%rax;"
- 		"  adcx %%r13, %%r11;"
-@@ -756,7 +756,7 @@ static inline void fsqr2(u64 *out, const
- 		"  movq %%r8, 32(%0);"
- 	: "+&r" (tmp), "+&r" (f), "+&r" (out)
- 	:
--	: "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15", "memory", "cc"
-+	: "%rax", "%rcx", "%rdx", "%r8", "%r9", "%r10", "%r11", "%rbx", "%r13", "%r14", "%r15", "memory", "cc"
- 	);
- }
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0056-crypto-arm-64-poly1305-add-artifact-to-.gitignore-fi.patch b/target/linux/generic/backport-5.4/080-wireguard-0056-crypto-arm-64-poly1305-add-artifact-to-.gitignore-fi.patch
deleted file mode 100644
index 655371630c..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0056-crypto-arm-64-poly1305-add-artifact-to-.gitignore-fi.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Thu, 19 Mar 2020 11:56:17 -0600
-Subject: [PATCH] crypto: arm[64]/poly1305 - add artifact to .gitignore files
-
-commit 6e4e00d8b68ca7eb30d08afb740033e0d36abe55 upstream.
-
-The .S_shipped yields a .S, and the pattern in these directories is to
-add that to .gitignore so that git-status doesn't raise a fuss.
-
-Fixes: a6b803b3ddc7 ("crypto: arm/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation")
-Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation")
-Reported-by: Emil Renner Berthing <kernel@esmil.dk>
-Cc: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/.gitignore   | 1 +
- arch/arm64/crypto/.gitignore | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/arch/arm/crypto/.gitignore
-+++ b/arch/arm/crypto/.gitignore
-@@ -1,3 +1,4 @@
- aesbs-core.S
- sha256-core.S
- sha512-core.S
-+poly1305-core.S
---- a/arch/arm64/crypto/.gitignore
-+++ b/arch/arm64/crypto/.gitignore
-@@ -1,2 +1,3 @@
- sha256-core.S
- sha512-core.S
-+poly1305-core.S
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0057-crypto-arch-lib-limit-simd-usage-to-4k-chunks.patch b/target/linux/generic/backport-5.4/080-wireguard-0057-crypto-arch-lib-limit-simd-usage-to-4k-chunks.patch
deleted file mode 100644
index f8828f243e..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0057-crypto-arch-lib-limit-simd-usage-to-4k-chunks.patch
+++ /dev/null
@@ -1,243 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Thu, 23 Apr 2020 15:54:04 -0600
-Subject: [PATCH] crypto: arch/lib - limit simd usage to 4k chunks
-
-commit 706024a52c614b478b63f7728d202532ce6591a9 upstream.
-
-The initial Zinc patchset, after some mailing list discussion, contained
-code to ensure that kernel_fpu_enable would not be kept on for more than
-a 4k chunk, since it disables preemption. The choice of 4k isn't totally
-scientific, but it's not a bad guess either, and it's what's used in
-both the x86 poly1305, blake2s, and nhpoly1305 code already (in the form
-of PAGE_SIZE, which this commit corrects to be explicitly 4k for the
-former two).
-
-Ard did some back of the envelope calculations and found that
-at 5 cycles/byte (overestimate) on a 1ghz processor (pretty slow), 4k
-means we have a maximum preemption disabling of 20us, which Sebastian
-confirmed was probably a good limit.
-
-Unfortunately the chunking appears to have been left out of the final
-patchset that added the glue code. So, this commit adds it back in.
-
-Fixes: 84e03fa39fbe ("crypto: x86/chacha - expose SIMD ChaCha routine as library function")
-Fixes: b3aad5bad26a ("crypto: arm64/chacha - expose arm64 ChaCha routine as library function")
-Fixes: a44a3430d71b ("crypto: arm/chacha - expose ARM ChaCha routine as library function")
-Fixes: d7d7b8535662 ("crypto: x86/poly1305 - wire up faster implementations for kernel")
-Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation")
-Fixes: a6b803b3ddc7 ("crypto: arm/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation")
-Fixes: ed0356eda153 ("crypto: blake2s - x86_64 SIMD implementation")
-Cc: Eric Biggers <ebiggers@google.com>
-Cc: Ard Biesheuvel <ardb@kernel.org>
-Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
-Cc: stable@vger.kernel.org
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/chacha-glue.c        | 14 +++++++++++---
- arch/arm/crypto/poly1305-glue.c      | 15 +++++++++++----
- arch/arm64/crypto/chacha-neon-glue.c | 14 +++++++++++---
- arch/arm64/crypto/poly1305-glue.c    | 15 +++++++++++----
- arch/x86/crypto/blake2s-glue.c       | 10 ++++------
- arch/x86/crypto/chacha_glue.c        | 14 +++++++++++---
- arch/x86/crypto/poly1305_glue.c      | 13 ++++++-------
- 7 files changed, 65 insertions(+), 30 deletions(-)
-
---- a/arch/arm/crypto/chacha-glue.c
-+++ b/arch/arm/crypto/chacha-glue.c
-@@ -91,9 +91,17 @@ void chacha_crypt_arch(u32 *state, u8 *d
- 		return;
- 	}
- 
--	kernel_neon_begin();
--	chacha_doneon(state, dst, src, bytes, nrounds);
--	kernel_neon_end();
-+	do {
-+		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
-+
-+		kernel_neon_begin();
-+		chacha_doneon(state, dst, src, todo, nrounds);
-+		kernel_neon_end();
-+
-+		bytes -= todo;
-+		src += todo;
-+		dst += todo;
-+	} while (bytes);
- }
- EXPORT_SYMBOL(chacha_crypt_arch);
- 
---- a/arch/arm/crypto/poly1305-glue.c
-+++ b/arch/arm/crypto/poly1305-glue.c
-@@ -160,13 +160,20 @@ void poly1305_update_arch(struct poly130
- 		unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE);
- 
- 		if (static_branch_likely(&have_neon) && do_neon) {
--			kernel_neon_begin();
--			poly1305_blocks_neon(&dctx->h, src, len, 1);
--			kernel_neon_end();
-+			do {
-+				unsigned int todo = min_t(unsigned int, len, SZ_4K);
-+
-+				kernel_neon_begin();
-+				poly1305_blocks_neon(&dctx->h, src, todo, 1);
-+				kernel_neon_end();
-+
-+				len -= todo;
-+				src += todo;
-+			} while (len);
- 		} else {
- 			poly1305_blocks_arm(&dctx->h, src, len, 1);
-+			src += len;
- 		}
--		src += len;
- 		nbytes %= POLY1305_BLOCK_SIZE;
- 	}
- 
---- a/arch/arm64/crypto/chacha-neon-glue.c
-+++ b/arch/arm64/crypto/chacha-neon-glue.c
-@@ -87,9 +87,17 @@ void chacha_crypt_arch(u32 *state, u8 *d
- 	    !crypto_simd_usable())
- 		return chacha_crypt_generic(state, dst, src, bytes, nrounds);
- 
--	kernel_neon_begin();
--	chacha_doneon(state, dst, src, bytes, nrounds);
--	kernel_neon_end();
-+	do {
-+		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
-+
-+		kernel_neon_begin();
-+		chacha_doneon(state, dst, src, todo, nrounds);
-+		kernel_neon_end();
-+
-+		bytes -= todo;
-+		src += todo;
-+		dst += todo;
-+	} while (bytes);
- }
- EXPORT_SYMBOL(chacha_crypt_arch);
- 
---- a/arch/arm64/crypto/poly1305-glue.c
-+++ b/arch/arm64/crypto/poly1305-glue.c
-@@ -143,13 +143,20 @@ void poly1305_update_arch(struct poly130
- 		unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE);
- 
- 		if (static_branch_likely(&have_neon) && crypto_simd_usable()) {
--			kernel_neon_begin();
--			poly1305_blocks_neon(&dctx->h, src, len, 1);
--			kernel_neon_end();
-+			do {
-+				unsigned int todo = min_t(unsigned int, len, SZ_4K);
-+
-+				kernel_neon_begin();
-+				poly1305_blocks_neon(&dctx->h, src, todo, 1);
-+				kernel_neon_end();
-+
-+				len -= todo;
-+				src += todo;
-+			} while (len);
- 		} else {
- 			poly1305_blocks(&dctx->h, src, len, 1);
-+			src += len;
- 		}
--		src += len;
- 		nbytes %= POLY1305_BLOCK_SIZE;
- 	}
- 
---- a/arch/x86/crypto/blake2s-glue.c
-+++ b/arch/x86/crypto/blake2s-glue.c
-@@ -32,16 +32,16 @@ void blake2s_compress_arch(struct blake2
- 			   const u32 inc)
- {
- 	/* SIMD disables preemption, so relax after processing each page. */
--	BUILD_BUG_ON(PAGE_SIZE / BLAKE2S_BLOCK_SIZE < 8);
-+	BUILD_BUG_ON(SZ_4K / BLAKE2S_BLOCK_SIZE < 8);
- 
- 	if (!static_branch_likely(&blake2s_use_ssse3) || !crypto_simd_usable()) {
- 		blake2s_compress_generic(state, block, nblocks, inc);
- 		return;
- 	}
- 
--	for (;;) {
-+	do {
- 		const size_t blocks = min_t(size_t, nblocks,
--					    PAGE_SIZE / BLAKE2S_BLOCK_SIZE);
-+					    SZ_4K / BLAKE2S_BLOCK_SIZE);
- 
- 		kernel_fpu_begin();
- 		if (IS_ENABLED(CONFIG_AS_AVX512) &&
-@@ -52,10 +52,8 @@ void blake2s_compress_arch(struct blake2
- 		kernel_fpu_end();
- 
- 		nblocks -= blocks;
--		if (!nblocks)
--			break;
- 		block += blocks * BLAKE2S_BLOCK_SIZE;
--	}
-+	} while (nblocks);
- }
- EXPORT_SYMBOL(blake2s_compress_arch);
- 
---- a/arch/x86/crypto/chacha_glue.c
-+++ b/arch/x86/crypto/chacha_glue.c
-@@ -154,9 +154,17 @@ void chacha_crypt_arch(u32 *state, u8 *d
- 	    bytes <= CHACHA_BLOCK_SIZE)
- 		return chacha_crypt_generic(state, dst, src, bytes, nrounds);
- 
--	kernel_fpu_begin();
--	chacha_dosimd(state, dst, src, bytes, nrounds);
--	kernel_fpu_end();
-+	do {
-+		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
-+
-+		kernel_fpu_begin();
-+		chacha_dosimd(state, dst, src, todo, nrounds);
-+		kernel_fpu_end();
-+
-+		bytes -= todo;
-+		src += todo;
-+		dst += todo;
-+	} while (bytes);
- }
- EXPORT_SYMBOL(chacha_crypt_arch);
- 
---- a/arch/x86/crypto/poly1305_glue.c
-+++ b/arch/x86/crypto/poly1305_glue.c
-@@ -91,8 +91,8 @@ static void poly1305_simd_blocks(void *c
- 	struct poly1305_arch_internal *state = ctx;
- 
- 	/* SIMD disables preemption, so relax after processing each page. */
--	BUILD_BUG_ON(PAGE_SIZE < POLY1305_BLOCK_SIZE ||
--		     PAGE_SIZE % POLY1305_BLOCK_SIZE);
-+	BUILD_BUG_ON(SZ_4K < POLY1305_BLOCK_SIZE ||
-+		     SZ_4K % POLY1305_BLOCK_SIZE);
- 
- 	if (!IS_ENABLED(CONFIG_AS_AVX) || !static_branch_likely(&poly1305_use_avx) ||
- 	    (len < (POLY1305_BLOCK_SIZE * 18) && !state->is_base2_26) ||
-@@ -102,8 +102,8 @@ static void poly1305_simd_blocks(void *c
- 		return;
- 	}
- 
--	for (;;) {
--		const size_t bytes = min_t(size_t, len, PAGE_SIZE);
-+	do {
-+		const size_t bytes = min_t(size_t, len, SZ_4K);
- 
- 		kernel_fpu_begin();
- 		if (IS_ENABLED(CONFIG_AS_AVX512) && static_branch_likely(&poly1305_use_avx512))
-@@ -113,11 +113,10 @@ static void poly1305_simd_blocks(void *c
- 		else
- 			poly1305_blocks_avx(ctx, inp, bytes, padbit);
- 		kernel_fpu_end();
-+
- 		len -= bytes;
--		if (!len)
--			break;
- 		inp += bytes;
--	}
-+	} while (len);
- }
- 
- static void poly1305_simd_emit(void *ctx, u8 mac[POLY1305_DIGEST_SIZE],
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0058-crypto-lib-chacha20poly1305-Add-missing-function-dec.patch b/target/linux/generic/backport-5.4/080-wireguard-0058-crypto-lib-chacha20poly1305-Add-missing-function-dec.patch
deleted file mode 100644
index 736147f934..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0058-crypto-lib-chacha20poly1305-Add-missing-function-dec.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Herbert Xu <herbert@gondor.apana.org.au>
-Date: Wed, 8 Jul 2020 12:41:13 +1000
-Subject: [PATCH] crypto: lib/chacha20poly1305 - Add missing function
- declaration
-
-commit 06cc2afbbdf9a9e8df3e2f8db724997dd6e1b4ac upstream.
-
-This patch adds a declaration for chacha20poly1305_selftest to
-silence a sparse warning.
-
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- include/crypto/chacha20poly1305.h | 2 ++
- lib/crypto/chacha20poly1305.c     | 2 --
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/include/crypto/chacha20poly1305.h
-+++ b/include/crypto/chacha20poly1305.h
-@@ -45,4 +45,6 @@ bool chacha20poly1305_decrypt_sg_inplace
- 					 const u64 nonce,
- 					 const u8 key[CHACHA20POLY1305_KEY_SIZE]);
- 
-+bool chacha20poly1305_selftest(void);
-+
- #endif /* __CHACHA20POLY1305_H */
---- a/lib/crypto/chacha20poly1305.c
-+++ b/lib/crypto/chacha20poly1305.c
-@@ -21,8 +21,6 @@
- 
- #define CHACHA_KEY_WORDS	(CHACHA_KEY_SIZE / sizeof(u32))
- 
--bool __init chacha20poly1305_selftest(void);
--
- static void chacha_load_key(u32 *k, const u8 *in)
- {
- 	k[0] = get_unaligned_le32(in);
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0059-crypto-x86-chacha-sse3-use-unaligned-loads-for-state.patch b/target/linux/generic/backport-5.4/080-wireguard-0059-crypto-x86-chacha-sse3-use-unaligned-loads-for-state.patch
deleted file mode 100644
index 52847877f6..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0059-crypto-x86-chacha-sse3-use-unaligned-loads-for-state.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Wed, 8 Jul 2020 12:11:18 +0300
-Subject: [PATCH] crypto: x86/chacha-sse3 - use unaligned loads for state array
-
-commit e79a31715193686e92dadb4caedfbb1f5de3659c upstream.
-
-Due to the fact that the x86 port does not support allocating objects
-on the stack with an alignment that exceeds 8 bytes, we have a rather
-ugly hack in the x86 code for ChaCha to ensure that the state array is
-aligned to 16 bytes, allowing the SSE3 implementation of the algorithm
-to use aligned loads.
-
-Given that the performance benefit of using of aligned loads appears to
-be limited (~0.25% for 1k blocks using tcrypt on a Corei7-8650U), and
-the fact that this hack has leaked into generic ChaCha code, let's just
-remove it.
-
-Cc: Martin Willi <martin@strongswan.org>
-Cc: Herbert Xu <herbert@gondor.apana.org.au>
-Cc: Eric Biggers <ebiggers@kernel.org>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Reviewed-by: Martin Willi <martin@strongswan.org>
-Reviewed-by: Eric Biggers <ebiggers@google.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/chacha-ssse3-x86_64.S | 16 ++++++++--------
- arch/x86/crypto/chacha_glue.c         | 17 ++---------------
- include/crypto/chacha.h               |  4 ----
- 3 files changed, 10 insertions(+), 27 deletions(-)
-
---- a/arch/x86/crypto/chacha-ssse3-x86_64.S
-+++ b/arch/x86/crypto/chacha-ssse3-x86_64.S
-@@ -120,10 +120,10 @@ ENTRY(chacha_block_xor_ssse3)
- 	FRAME_BEGIN
- 
- 	# x0..3 = s0..3
--	movdqa		0x00(%rdi),%xmm0
--	movdqa		0x10(%rdi),%xmm1
--	movdqa		0x20(%rdi),%xmm2
--	movdqa		0x30(%rdi),%xmm3
-+	movdqu		0x00(%rdi),%xmm0
-+	movdqu		0x10(%rdi),%xmm1
-+	movdqu		0x20(%rdi),%xmm2
-+	movdqu		0x30(%rdi),%xmm3
- 	movdqa		%xmm0,%xmm8
- 	movdqa		%xmm1,%xmm9
- 	movdqa		%xmm2,%xmm10
-@@ -205,10 +205,10 @@ ENTRY(hchacha_block_ssse3)
- 	# %edx: nrounds
- 	FRAME_BEGIN
- 
--	movdqa		0x00(%rdi),%xmm0
--	movdqa		0x10(%rdi),%xmm1
--	movdqa		0x20(%rdi),%xmm2
--	movdqa		0x30(%rdi),%xmm3
-+	movdqu		0x00(%rdi),%xmm0
-+	movdqu		0x10(%rdi),%xmm1
-+	movdqu		0x20(%rdi),%xmm2
-+	movdqu		0x30(%rdi),%xmm3
- 
- 	mov		%edx,%r8d
- 	call		chacha_permute
---- a/arch/x86/crypto/chacha_glue.c
-+++ b/arch/x86/crypto/chacha_glue.c
-@@ -14,8 +14,6 @@
- #include <linux/module.h>
- #include <asm/simd.h>
- 
--#define CHACHA_STATE_ALIGN 16
--
- asmlinkage void chacha_block_xor_ssse3(u32 *state, u8 *dst, const u8 *src,
- 				       unsigned int len, int nrounds);
- asmlinkage void chacha_4block_xor_ssse3(u32 *state, u8 *dst, const u8 *src,
-@@ -125,8 +123,6 @@ static void chacha_dosimd(u32 *state, u8
- 
- void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds)
- {
--	state = PTR_ALIGN(state, CHACHA_STATE_ALIGN);
--
- 	if (!static_branch_likely(&chacha_use_simd) || !crypto_simd_usable()) {
- 		hchacha_block_generic(state, stream, nrounds);
- 	} else {
-@@ -139,8 +135,6 @@ EXPORT_SYMBOL(hchacha_block_arch);
- 
- void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv)
- {
--	state = PTR_ALIGN(state, CHACHA_STATE_ALIGN);
--
- 	chacha_init_generic(state, key, iv);
- }
- EXPORT_SYMBOL(chacha_init_arch);
-@@ -148,8 +142,6 @@ EXPORT_SYMBOL(chacha_init_arch);
- void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes,
- 		       int nrounds)
- {
--	state = PTR_ALIGN(state, CHACHA_STATE_ALIGN);
--
- 	if (!static_branch_likely(&chacha_use_simd) || !crypto_simd_usable() ||
- 	    bytes <= CHACHA_BLOCK_SIZE)
- 		return chacha_crypt_generic(state, dst, src, bytes, nrounds);
-@@ -171,15 +163,12 @@ EXPORT_SYMBOL(chacha_crypt_arch);
- static int chacha_simd_stream_xor(struct skcipher_request *req,
- 				  const struct chacha_ctx *ctx, const u8 *iv)
- {
--	u32 *state, state_buf[16 + 2] __aligned(8);
-+	u32 state[CHACHA_STATE_WORDS] __aligned(8);
- 	struct skcipher_walk walk;
- 	int err;
- 
- 	err = skcipher_walk_virt(&walk, req, false);
- 
--	BUILD_BUG_ON(CHACHA_STATE_ALIGN != 16);
--	state = PTR_ALIGN(state_buf + 0, CHACHA_STATE_ALIGN);
--
- 	chacha_init_generic(state, ctx->key, iv);
- 
- 	while (walk.nbytes > 0) {
-@@ -218,12 +207,10 @@ static int xchacha_simd(struct skcipher_
- {
- 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
- 	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
--	u32 *state, state_buf[16 + 2] __aligned(8);
-+	u32 state[CHACHA_STATE_WORDS] __aligned(8);
- 	struct chacha_ctx subctx;
- 	u8 real_iv[16];
- 
--	BUILD_BUG_ON(CHACHA_STATE_ALIGN != 16);
--	state = PTR_ALIGN(state_buf + 0, CHACHA_STATE_ALIGN);
- 	chacha_init_generic(state, ctx->key, req->iv);
- 
- 	if (req->cryptlen > CHACHA_BLOCK_SIZE && crypto_simd_usable()) {
---- a/include/crypto/chacha.h
-+++ b/include/crypto/chacha.h
-@@ -25,11 +25,7 @@
- #define CHACHA_BLOCK_SIZE	64
- #define CHACHAPOLY_IV_SIZE	12
- 
--#ifdef CONFIG_X86_64
--#define CHACHA_STATE_WORDS	((CHACHA_BLOCK_SIZE + 12) / sizeof(u32))
--#else
- #define CHACHA_STATE_WORDS	(CHACHA_BLOCK_SIZE / sizeof(u32))
--#endif
- 
- /* 192-bit nonce, then 64-bit stream position */
- #define XCHACHA_IV_SIZE		32
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0060-crypto-x86-curve25519-Remove-unused-carry-variables.patch b/target/linux/generic/backport-5.4/080-wireguard-0060-crypto-x86-curve25519-Remove-unused-carry-variables.patch
deleted file mode 100644
index 5a2d20a982..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0060-crypto-x86-curve25519-Remove-unused-carry-variables.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Herbert Xu <herbert@gondor.apana.org.au>
-Date: Thu, 23 Jul 2020 17:50:48 +1000
-Subject: [PATCH] crypto: x86/curve25519 - Remove unused carry variables
-
-commit 054a5540fb8f7268e2c79e9deab4242db15c8cba upstream.
-
-The carry variables are assigned but never used, which upsets
-the compiler.  This patch removes them.
-
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Reviewed-by: Karthikeyan Bhargavan <karthik.bhargavan@gmail.com>
-Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/curve25519-x86_64.c | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/arch/x86/crypto/curve25519-x86_64.c
-+++ b/arch/x86/crypto/curve25519-x86_64.c
-@@ -948,10 +948,8 @@ static void store_felem(u64 *b, u64 *f)
- {
- 	u64 f30 = f[3U];
- 	u64 top_bit0 = f30 >> (u32)63U;
--	u64 carry0;
- 	u64 f31;
- 	u64 top_bit;
--	u64 carry;
- 	u64 f0;
- 	u64 f1;
- 	u64 f2;
-@@ -970,11 +968,11 @@ static void store_felem(u64 *b, u64 *f)
- 	u64 o2;
- 	u64 o3;
- 	f[3U] = f30 & (u64)0x7fffffffffffffffU;
--	carry0 = add_scalar(f, f, (u64)19U * top_bit0);
-+	add_scalar(f, f, (u64)19U * top_bit0);
- 	f31 = f[3U];
- 	top_bit = f31 >> (u32)63U;
- 	f[3U] = f31 & (u64)0x7fffffffffffffffU;
--	carry = add_scalar(f, f, (u64)19U * top_bit);
-+	add_scalar(f, f, (u64)19U * top_bit);
- 	f0 = f[0U];
- 	f1 = f[1U];
- 	f2 = f[2U];
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0061-crypto-arm-curve25519-include-linux-scatterlist.h.patch b/target/linux/generic/backport-5.4/080-wireguard-0061-crypto-arm-curve25519-include-linux-scatterlist.h.patch
deleted file mode 100644
index b58fd08fc9..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0061-crypto-arm-curve25519-include-linux-scatterlist.h.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Fabio Estevam <festevam@gmail.com>
-Date: Mon, 24 Aug 2020 11:09:53 -0300
-Subject: [PATCH] crypto: arm/curve25519 - include <linux/scatterlist.h>
-
-commit 6779d0e6b0fe193ab3010ea201782ca6f75a3862 upstream.
-
-Building ARM allmodconfig leads to the following warnings:
-
-arch/arm/crypto/curve25519-glue.c:73:12: error: implicit declaration of function 'sg_copy_to_buffer' [-Werror=implicit-function-declaration]
-arch/arm/crypto/curve25519-glue.c:74:9: error: implicit declaration of function 'sg_nents_for_len' [-Werror=implicit-function-declaration]
-arch/arm/crypto/curve25519-glue.c:88:11: error: implicit declaration of function 'sg_copy_from_buffer' [-Werror=implicit-function-declaration]
-
-Include <linux/scatterlist.h> to fix such warnings
-
-Reported-by: Olof's autobuilder <build@lixom.net>
-Fixes: 0c3dc787a62a ("crypto: algapi - Remove skbuff.h inclusion")
-Signed-off-by: Fabio Estevam <festevam@gmail.com>
-Acked-by: Ard Biesheuvel <ardb@kernel.org>
-Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/curve25519-glue.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/crypto/curve25519-glue.c
-+++ b/arch/arm/crypto/curve25519-glue.c
-@@ -16,6 +16,7 @@
- #include <linux/module.h>
- #include <linux/init.h>
- #include <linux/jump_label.h>
-+#include <linux/scatterlist.h>
- #include <crypto/curve25519.h>
- 
- asmlinkage void curve25519_neon(u8 mypublic[CURVE25519_KEY_SIZE],
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0062-crypto-arm-poly1305-Add-prototype-for-poly1305_block.patch b/target/linux/generic/backport-5.4/080-wireguard-0062-crypto-arm-poly1305-Add-prototype-for-poly1305_block.patch
deleted file mode 100644
index cf3724a499..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0062-crypto-arm-poly1305-Add-prototype-for-poly1305_block.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Herbert Xu <herbert@gondor.apana.org.au>
-Date: Tue, 25 Aug 2020 11:23:00 +1000
-Subject: [PATCH] crypto: arm/poly1305 - Add prototype for poly1305_blocks_neon
-
-commit 51982ea02aef972132eb35c583d3e4c5b83166e5 upstream.
-
-This patch adds a prototype for poly1305_blocks_neon to slience
-a compiler warning:
-
-  CC [M]  arch/arm/crypto/poly1305-glue.o
-../arch/arm/crypto/poly1305-glue.c:25:13: warning: no previous prototype for `poly1305_blocks_neon' [-Wmissing-prototypes]
- void __weak poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit)
-             ^~~~~~~~~~~~~~~~~~~~
-
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/poly1305-glue.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/crypto/poly1305-glue.c
-+++ b/arch/arm/crypto/poly1305-glue.c
-@@ -20,6 +20,7 @@
- 
- void poly1305_init_arm(void *state, const u8 *key);
- void poly1305_blocks_arm(void *state, const u8 *src, u32 len, u32 hibit);
-+void poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit);
- void poly1305_emit_arm(void *state, u8 *digest, const u32 *nonce);
- 
- void __weak poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit)
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0063-crypto-curve25519-x86_64-Use-XORL-r32-32.patch b/target/linux/generic/backport-5.4/080-wireguard-0063-crypto-curve25519-x86_64-Use-XORL-r32-32.patch
deleted file mode 100644
index dd76e2a1f2..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0063-crypto-curve25519-x86_64-Use-XORL-r32-32.patch
+++ /dev/null
@@ -1,261 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Uros Bizjak <ubizjak@gmail.com>
-Date: Thu, 27 Aug 2020 19:30:58 +0200
-Subject: [PATCH] crypto: curve25519-x86_64 - Use XORL r32,32
-
-commit db719539fd3889836900bf912755aa30a5985e9a upstream.
-
-x86_64 zero extends 32bit operations, so for 64bit operands,
-XORL r32,r32 is functionally equal to XORL r64,r64, but avoids
-a REX prefix byte when legacy registers are used.
-
-Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
-Cc: Herbert Xu <herbert@gondor.apana.org.au>
-Cc: "David S. Miller" <davem@davemloft.net>
-Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/curve25519-x86_64.c | 68 ++++++++++++++---------------
- 1 file changed, 34 insertions(+), 34 deletions(-)
-
---- a/arch/x86/crypto/curve25519-x86_64.c
-+++ b/arch/x86/crypto/curve25519-x86_64.c
-@@ -45,11 +45,11 @@ static inline u64 add_scalar(u64 *out, c
- 
- 	asm volatile(
- 		/* Clear registers to propagate the carry bit */
--		"  xor %%r8, %%r8;"
--		"  xor %%r9, %%r9;"
--		"  xor %%r10, %%r10;"
--		"  xor %%r11, %%r11;"
--		"  xor %1, %1;"
-+		"  xor %%r8d, %%r8d;"
-+		"  xor %%r9d, %%r9d;"
-+		"  xor %%r10d, %%r10d;"
-+		"  xor %%r11d, %%r11d;"
-+		"  xor %k1, %k1;"
- 
- 		/* Begin addition chain */
- 		"  addq 0(%3), %0;"
-@@ -93,7 +93,7 @@ static inline void fadd(u64 *out, const
- 		"  cmovc %0, %%rax;"
- 
- 		/* Step 2: Add carry*38 to the original sum */
--		"  xor %%rcx, %%rcx;"
-+		"  xor %%ecx, %%ecx;"
- 		"  add %%rax, %%r8;"
- 		"  adcx %%rcx, %%r9;"
- 		"  movq %%r9, 8(%1);"
-@@ -165,28 +165,28 @@ static inline void fmul(u64 *out, const
- 
- 		/* Compute src1[0] * src2 */
- 		"  movq 0(%1), %%rdx;"
--		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  movq %%r8, 0(%0);"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10d, %%r10d;"   "  movq %%r8, 0(%0);"
- 		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  movq %%r10, 8(%0);"
- 		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"
- 		/* Compute src1[1] * src2 */
- 		"  movq 8(%1), %%rdx;"
--		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  adcxq 8(%0), %%r8;"    "  movq %%r8, 8(%0);"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10d, %%r10d;"   "  adcxq 8(%0), %%r8;"    "  movq %%r8, 8(%0);"
- 		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 16(%0);"
- 		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  mov $0, %%r8;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
- 		/* Compute src1[2] * src2 */
- 		"  movq 16(%1), %%rdx;"
--		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 16(%0), %%r8;"    "  movq %%r8, 16(%0);"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10d, %%r10d;"   "  adcxq 16(%0), %%r8;"   "  movq %%r8, 16(%0);"
- 		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 24(%0);"
- 		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  mov $0, %%r8;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
- 		/* Compute src1[3] * src2 */
- 		"  movq 24(%1), %%rdx;"
--		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 24(%0), %%r8;"    "  movq %%r8, 24(%0);"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10d, %%r10d;"   "  adcxq 24(%0), %%r8;"   "  movq %%r8, 24(%0);"
- 		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 32(%0);"
- 		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  movq %%rbx, 40(%0);"    "  mov $0, %%r8;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  movq %%r14, 48(%0);"    "  mov $0, %%rax;"
-@@ -200,7 +200,7 @@ static inline void fmul(u64 *out, const
- 		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
- 		"  mov $38, %%rdx;"
- 		"  mulxq 32(%1), %%r8, %%r13;"
--		"  xor %3, %3;"
-+		"  xor %k3, %k3;"
- 		"  adoxq 0(%1), %%r8;"
- 		"  mulxq 40(%1), %%r9, %%rbx;"
- 		"  adcx %%r13, %%r9;"
-@@ -246,28 +246,28 @@ static inline void fmul2(u64 *out, const
- 
- 		/* Compute src1[0] * src2 */
- 		"  movq 0(%1), %%rdx;"
--		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  movq %%r8, 0(%0);"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10d, %%r10d;"   "  movq %%r8, 0(%0);"
- 		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  movq %%r10, 8(%0);"
- 		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"
- 		/* Compute src1[1] * src2 */
- 		"  movq 8(%1), %%rdx;"
--		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  adcxq 8(%0), %%r8;"    "  movq %%r8, 8(%0);"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10d, %%r10d;"   "  adcxq 8(%0), %%r8;"    "  movq %%r8, 8(%0);"
- 		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 16(%0);"
- 		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  mov $0, %%r8;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
- 		/* Compute src1[2] * src2 */
- 		"  movq 16(%1), %%rdx;"
--		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 16(%0), %%r8;"    "  movq %%r8, 16(%0);"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10d, %%r10d;"   "  adcxq 16(%0), %%r8;"   "  movq %%r8, 16(%0);"
- 		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 24(%0);"
- 		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  mov $0, %%r8;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
- 		/* Compute src1[3] * src2 */
- 		"  movq 24(%1), %%rdx;"
--		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 24(%0), %%r8;"    "  movq %%r8, 24(%0);"
-+		"  mulxq 0(%3), %%r8, %%r9;"       "  xor %%r10d, %%r10d;"   "  adcxq 24(%0), %%r8;"   "  movq %%r8, 24(%0);"
- 		"  mulxq 8(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 32(%0);"
- 		"  mulxq 16(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  movq %%rbx, 40(%0);"    "  mov $0, %%r8;"
- 		"  mulxq 24(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  movq %%r14, 48(%0);"    "  mov $0, %%rax;"
-@@ -277,29 +277,29 @@ static inline void fmul2(u64 *out, const
- 
- 		/* Compute src1[0] * src2 */
- 		"  movq 32(%1), %%rdx;"
--		"  mulxq 32(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  movq %%r8, 64(%0);"
--		"  mulxq 40(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  movq %%r10, 72(%0);"
-+		"  mulxq 32(%3), %%r8, %%r9;"      "  xor %%r10d, %%r10d;"   "  movq %%r8, 64(%0);"
-+		"  mulxq 40(%3), %%r10, %%r11;"    "  adox %%r9, %%r10;"     "  movq %%r10, 72(%0);"
- 		"  mulxq 48(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"
- 		"  mulxq 56(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"
- 		/* Compute src1[1] * src2 */
- 		"  movq 40(%1), %%rdx;"
--		"  mulxq 32(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"     "  adcxq 72(%0), %%r8;"    "  movq %%r8, 72(%0);"
--		"  mulxq 40(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 80(%0);"
-+		"  mulxq 32(%3), %%r8, %%r9;"      "  xor %%r10d, %%r10d;"   "  adcxq 72(%0), %%r8;"   "  movq %%r8, 72(%0);"
-+		"  mulxq 40(%3), %%r10, %%r11;"    "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 80(%0);"
- 		"  mulxq 48(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  mov $0, %%r8;"
- 		"  mulxq 56(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
- 		/* Compute src1[2] * src2 */
- 		"  movq 48(%1), %%rdx;"
--		"  mulxq 32(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 80(%0), %%r8;"    "  movq %%r8, 80(%0);"
--		"  mulxq 40(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 88(%0);"
-+		"  mulxq 32(%3), %%r8, %%r9;"      "  xor %%r10d, %%r10d;"   "  adcxq 80(%0), %%r8;"   "  movq %%r8, 80(%0);"
-+		"  mulxq 40(%3), %%r10, %%r11;"    "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 88(%0);"
- 		"  mulxq 48(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  mov $0, %%r8;"
- 		"  mulxq 56(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"
- 		/* Compute src1[3] * src2 */
- 		"  movq 56(%1), %%rdx;"
--		"  mulxq 32(%3), %%r8, %%r9;"       "  xor %%r10, %%r10;"    "  adcxq 88(%0), %%r8;"    "  movq %%r8, 88(%0);"
--		"  mulxq 40(%3), %%r10, %%r11;"     "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 96(%0);"
-+		"  mulxq 32(%3), %%r8, %%r9;"      "  xor %%r10d, %%r10d;"   "  adcxq 88(%0), %%r8;"   "  movq %%r8, 88(%0);"
-+		"  mulxq 40(%3), %%r10, %%r11;"    "  adox %%r9, %%r10;"     "  adcx %%rbx, %%r10;"    "  movq %%r10, 96(%0);"
- 		"  mulxq 48(%3), %%rbx, %%r13;"    "  adox %%r11, %%rbx;"    "  adcx %%r14, %%rbx;"    "  movq %%rbx, 104(%0);"    "  mov $0, %%r8;"
- 		"  mulxq 56(%3), %%r14, %%rdx;"    "  adox %%r13, %%r14;"    "  adcx %%rax, %%r14;"    "  movq %%r14, 112(%0);"    "  mov $0, %%rax;"
- 		                                   "  adox %%rdx, %%rax;"    "  adcx %%r8, %%rax;"     "  movq %%rax, 120(%0);"
-@@ -312,7 +312,7 @@ static inline void fmul2(u64 *out, const
- 		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
- 		"  mov $38, %%rdx;"
- 		"  mulxq 32(%1), %%r8, %%r13;"
--		"  xor %3, %3;"
-+		"  xor %k3, %k3;"
- 		"  adoxq 0(%1), %%r8;"
- 		"  mulxq 40(%1), %%r9, %%rbx;"
- 		"  adcx %%r13, %%r9;"
-@@ -345,7 +345,7 @@ static inline void fmul2(u64 *out, const
- 		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
- 		"  mov $38, %%rdx;"
- 		"  mulxq 96(%1), %%r8, %%r13;"
--		"  xor %3, %3;"
-+		"  xor %k3, %k3;"
- 		"  adoxq 64(%1), %%r8;"
- 		"  mulxq 104(%1), %%r9, %%rbx;"
- 		"  adcx %%r13, %%r9;"
-@@ -516,7 +516,7 @@ static inline void fsqr(u64 *out, const
- 
- 		/* Step 1: Compute all partial products */
- 		"  movq 0(%1), %%rdx;"                                       /* f[0] */
--		"  mulxq 8(%1), %%r8, %%r14;"      "  xor %%r15, %%r15;"     /* f[1]*f[0] */
-+		"  mulxq 8(%1), %%r8, %%r14;"      "  xor %%r15d, %%r15d;"   /* f[1]*f[0] */
- 		"  mulxq 16(%1), %%r9, %%r10;"     "  adcx %%r14, %%r9;"     /* f[2]*f[0] */
- 		"  mulxq 24(%1), %%rax, %%rcx;"    "  adcx %%rax, %%r10;"    /* f[3]*f[0] */
- 		"  movq 24(%1), %%rdx;"                                      /* f[3] */
-@@ -526,7 +526,7 @@ static inline void fsqr(u64 *out, const
- 		"  mulxq 16(%1), %%rax, %%rcx;"    "  mov $0, %%r14;"        /* f[2]*f[1] */
- 
- 		/* Step 2: Compute two parallel carry chains */
--		"  xor %%r15, %%r15;"
-+		"  xor %%r15d, %%r15d;"
- 		"  adox %%rax, %%r10;"
- 		"  adcx %%r8, %%r8;"
- 		"  adox %%rcx, %%r11;"
-@@ -563,7 +563,7 @@ static inline void fsqr(u64 *out, const
- 		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
- 		"  mov $38, %%rdx;"
- 		"  mulxq 32(%1), %%r8, %%r13;"
--		"  xor %%rcx, %%rcx;"
-+		"  xor %%ecx, %%ecx;"
- 		"  adoxq 0(%1), %%r8;"
- 		"  mulxq 40(%1), %%r9, %%rbx;"
- 		"  adcx %%r13, %%r9;"
-@@ -607,7 +607,7 @@ static inline void fsqr2(u64 *out, const
- 	asm volatile(
- 		/* Step 1: Compute all partial products */
- 		"  movq 0(%1), %%rdx;"                                       /* f[0] */
--		"  mulxq 8(%1), %%r8, %%r14;"      "  xor %%r15, %%r15;"     /* f[1]*f[0] */
-+		"  mulxq 8(%1), %%r8, %%r14;"      "  xor %%r15d, %%r15d;"   /* f[1]*f[0] */
- 		"  mulxq 16(%1), %%r9, %%r10;"     "  adcx %%r14, %%r9;"     /* f[2]*f[0] */
- 		"  mulxq 24(%1), %%rax, %%rcx;"    "  adcx %%rax, %%r10;"    /* f[3]*f[0] */
- 		"  movq 24(%1), %%rdx;"                                      /* f[3] */
-@@ -617,7 +617,7 @@ static inline void fsqr2(u64 *out, const
- 		"  mulxq 16(%1), %%rax, %%rcx;"    "  mov $0, %%r14;"        /* f[2]*f[1] */
- 
- 		/* Step 2: Compute two parallel carry chains */
--		"  xor %%r15, %%r15;"
-+		"  xor %%r15d, %%r15d;"
- 		"  adox %%rax, %%r10;"
- 		"  adcx %%r8, %%r8;"
- 		"  adox %%rcx, %%r11;"
-@@ -647,7 +647,7 @@ static inline void fsqr2(u64 *out, const
- 
- 		/* Step 1: Compute all partial products */
- 		"  movq 32(%1), %%rdx;"                                       /* f[0] */
--		"  mulxq 40(%1), %%r8, %%r14;"      "  xor %%r15, %%r15;"     /* f[1]*f[0] */
-+		"  mulxq 40(%1), %%r8, %%r14;"     "  xor %%r15d, %%r15d;"   /* f[1]*f[0] */
- 		"  mulxq 48(%1), %%r9, %%r10;"     "  adcx %%r14, %%r9;"     /* f[2]*f[0] */
- 		"  mulxq 56(%1), %%rax, %%rcx;"    "  adcx %%rax, %%r10;"    /* f[3]*f[0] */
- 		"  movq 56(%1), %%rdx;"                                      /* f[3] */
-@@ -657,7 +657,7 @@ static inline void fsqr2(u64 *out, const
- 		"  mulxq 48(%1), %%rax, %%rcx;"    "  mov $0, %%r14;"        /* f[2]*f[1] */
- 
- 		/* Step 2: Compute two parallel carry chains */
--		"  xor %%r15, %%r15;"
-+		"  xor %%r15d, %%r15d;"
- 		"  adox %%rax, %%r10;"
- 		"  adcx %%r8, %%r8;"
- 		"  adox %%rcx, %%r11;"
-@@ -692,7 +692,7 @@ static inline void fsqr2(u64 *out, const
- 		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
- 		"  mov $38, %%rdx;"
- 		"  mulxq 32(%1), %%r8, %%r13;"
--		"  xor %%rcx, %%rcx;"
-+		"  xor %%ecx, %%ecx;"
- 		"  adoxq 0(%1), %%r8;"
- 		"  mulxq 40(%1), %%r9, %%rbx;"
- 		"  adcx %%r13, %%r9;"
-@@ -725,7 +725,7 @@ static inline void fsqr2(u64 *out, const
- 		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
- 		"  mov $38, %%rdx;"
- 		"  mulxq 96(%1), %%r8, %%r13;"
--		"  xor %%rcx, %%rcx;"
-+		"  xor %%ecx, %%ecx;"
- 		"  adoxq 64(%1), %%r8;"
- 		"  mulxq 104(%1), %%r9, %%rbx;"
- 		"  adcx %%r13, %%r9;"
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0064-crypto-poly1305-x86_64-Use-XORL-r32-32.patch b/target/linux/generic/backport-5.4/080-wireguard-0064-crypto-poly1305-x86_64-Use-XORL-r32-32.patch
deleted file mode 100644
index 4fcaa1eb75..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0064-crypto-poly1305-x86_64-Use-XORL-r32-32.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Uros Bizjak <ubizjak@gmail.com>
-Date: Thu, 27 Aug 2020 19:38:31 +0200
-Subject: [PATCH] crypto: poly1305-x86_64 - Use XORL r32,32
-
-commit 7dfd1e01b3dfc13431b1b25720cf2692a7e111ef upstream.
-
-x86_64 zero extends 32bit operations, so for 64bit operands,
-XORL r32,r32 is functionally equal to XORQ r64,r64, but avoids
-a REX prefix byte when legacy registers are used.
-
-Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
-Cc: Herbert Xu <herbert@gondor.apana.org.au>
-Cc: "David S. Miller" <davem@davemloft.net>
-Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/poly1305-x86_64-cryptogams.pl | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/x86/crypto/poly1305-x86_64-cryptogams.pl
-+++ b/arch/x86/crypto/poly1305-x86_64-cryptogams.pl
-@@ -246,7 +246,7 @@ $code.=<<___ if (!$kernel);
- ___
- &declare_function("poly1305_init_x86_64", 32, 3);
- $code.=<<___;
--	xor	%rax,%rax
-+	xor	%eax,%eax
- 	mov	%rax,0($ctx)		# initialize hash value
- 	mov	%rax,8($ctx)
- 	mov	%rax,16($ctx)
-@@ -2869,7 +2869,7 @@ $code.=<<___;
- .type	poly1305_init_base2_44,\@function,3
- .align	32
- poly1305_init_base2_44:
--	xor	%rax,%rax
-+	xor	%eax,%eax
- 	mov	%rax,0($ctx)		# initialize hash value
- 	mov	%rax,8($ctx)
- 	mov	%rax,16($ctx)
-@@ -3963,7 +3963,7 @@ xor128_decrypt_n_pad:
- 	mov	\$16,$len
- 	sub	%r10,$len
- 	xor	%eax,%eax
--	xor	%r11,%r11
-+	xor	%r11d,%r11d
- .Loop_dec_byte:
- 	mov	($inp,$otp),%r11b
- 	mov	($otp),%al
-@@ -4101,7 +4101,7 @@ avx_handler:
- 	.long	0xa548f3fc		# cld; rep movsq
- 
- 	mov	$disp,%rsi
--	xor	%rcx,%rcx		# arg1, UNW_FLAG_NHANDLER
-+	xor	%ecx,%ecx		# arg1, UNW_FLAG_NHANDLER
- 	mov	8(%rsi),%rdx		# arg2, disp->ImageBase
- 	mov	0(%rsi),%r8		# arg3, disp->ControlPc
- 	mov	16(%rsi),%r9		# arg4, disp->FunctionEntry
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0065-crypto-x86-poly1305-Remove-assignments-with-no-effec.patch b/target/linux/generic/backport-5.4/080-wireguard-0065-crypto-x86-poly1305-Remove-assignments-with-no-effec.patch
deleted file mode 100644
index ee64bfe1fc..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0065-crypto-x86-poly1305-Remove-assignments-with-no-effec.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Herbert Xu <herbert@gondor.apana.org.au>
-Date: Thu, 24 Sep 2020 13:29:04 +1000
-Subject: [PATCH] crypto: x86/poly1305 - Remove assignments with no effect
-
-commit 4a0c1de64bf9d9027a6f19adfba89fc27893db23 upstream.
-
-This patch removes a few ineffectual assignments from the function
-crypto_poly1305_setdctxkey.
-
-Reported-by: kernel test robot <lkp@intel.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/poly1305_glue.c | 3 ---
- 1 file changed, 3 deletions(-)
-
---- a/arch/x86/crypto/poly1305_glue.c
-+++ b/arch/x86/crypto/poly1305_glue.c
-@@ -157,9 +157,6 @@ static unsigned int crypto_poly1305_setd
- 			dctx->s[1] = get_unaligned_le32(&inp[4]);
- 			dctx->s[2] = get_unaligned_le32(&inp[8]);
- 			dctx->s[3] = get_unaligned_le32(&inp[12]);
--			inp += POLY1305_BLOCK_SIZE;
--			len -= POLY1305_BLOCK_SIZE;
--			acc += POLY1305_BLOCK_SIZE;
- 			dctx->sset = true;
- 		}
- 	}
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0066-crypto-x86-poly1305-add-back-a-needed-assignment.patch b/target/linux/generic/backport-5.4/080-wireguard-0066-crypto-x86-poly1305-add-back-a-needed-assignment.patch
deleted file mode 100644
index dce8bb912b..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0066-crypto-x86-poly1305-add-back-a-needed-assignment.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Eric Biggers <ebiggers@google.com>
-Date: Fri, 23 Oct 2020 15:27:48 -0700
-Subject: [PATCH] crypto: x86/poly1305 - add back a needed assignment
-
-commit c3a98c3ad5c0dc60a1ac66bf91147a3f39cac96b upstream.
-
-One of the assignments that was removed by commit 4a0c1de64bf9 ("crypto:
-x86/poly1305 - Remove assignments with no effect") is actually needed,
-since it affects the return value.
-
-This fixes the following crypto self-test failure:
-
-    alg: shash: poly1305-simd test failed (wrong result) on test vector 2, cfg="init+update+final aligned buffer"
-
-Fixes: 4a0c1de64bf9 ("crypto: x86/poly1305 - Remove assignments with no effect")
-Signed-off-by: Eric Biggers <ebiggers@google.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/x86/crypto/poly1305_glue.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/x86/crypto/poly1305_glue.c
-+++ b/arch/x86/crypto/poly1305_glue.c
-@@ -157,6 +157,7 @@ static unsigned int crypto_poly1305_setd
- 			dctx->s[1] = get_unaligned_le32(&inp[4]);
- 			dctx->s[2] = get_unaligned_le32(&inp[8]);
- 			dctx->s[3] = get_unaligned_le32(&inp[12]);
-+			acc += POLY1305_BLOCK_SIZE;
- 			dctx->sset = true;
- 		}
- 	}
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0067-crypto-Kconfig-CRYPTO_MANAGER_EXTRA_TESTS-requires-t.patch b/target/linux/generic/backport-5.4/080-wireguard-0067-crypto-Kconfig-CRYPTO_MANAGER_EXTRA_TESTS-requires-t.patch
deleted file mode 100644
index 31c47df4b3..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0067-crypto-Kconfig-CRYPTO_MANAGER_EXTRA_TESTS-requires-t.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Mon, 2 Nov 2020 14:48:15 +0100
-Subject: [PATCH] crypto: Kconfig - CRYPTO_MANAGER_EXTRA_TESTS requires the
- manager
-
-commit 6569e3097f1c4a490bdf2b23d326855e04942dfd upstream.
-
-The extra tests in the manager actually require the manager to be
-selected too. Otherwise the linker gives errors like:
-
-ld: arch/x86/crypto/chacha_glue.o: in function `chacha_simd_stream_xor':
-chacha_glue.c:(.text+0x422): undefined reference to `crypto_simd_disabled_for_test'
-
-Fixes: 2343d1529aff ("crypto: Kconfig - allow tests to be disabled when manager is disabled")
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- crypto/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -145,7 +145,7 @@ config CRYPTO_MANAGER_DISABLE_TESTS
- 
- config CRYPTO_MANAGER_EXTRA_TESTS
- 	bool "Enable extra run-time crypto self tests"
--	depends on DEBUG_KERNEL && !CRYPTO_MANAGER_DISABLE_TESTS
-+	depends on DEBUG_KERNEL && !CRYPTO_MANAGER_DISABLE_TESTS && CRYPTO_MANAGER
- 	help
- 	  Enable extra run-time self tests of registered crypto algorithms,
- 	  including randomized fuzz tests.
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0068-crypto-arm-chacha-neon-optimize-for-non-block-size-m.patch b/target/linux/generic/backport-5.4/080-wireguard-0068-crypto-arm-chacha-neon-optimize-for-non-block-size-m.patch
deleted file mode 100644
index b31b8d9a0e..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0068-crypto-arm-chacha-neon-optimize-for-non-block-size-m.patch
+++ /dev/null
@@ -1,272 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Tue, 3 Nov 2020 17:28:09 +0100
-Subject: [PATCH] crypto: arm/chacha-neon - optimize for non-block size
- multiples
-
-commit 86cd97ec4b943af35562a74688bc4e909b32c3d1 upstream.
-
-The current NEON based ChaCha implementation for ARM is optimized for
-multiples of 4x the ChaCha block size (64 bytes). This makes sense for
-block encryption, but given that ChaCha is also often used in the
-context of networking, it makes sense to consider arbitrary length
-inputs as well.
-
-For example, WireGuard typically uses 1420 byte packets, and performing
-ChaCha encryption involves 5 invocations of chacha_4block_xor_neon()
-and 3 invocations of chacha_block_xor_neon(), where the last one also
-involves a memcpy() using a buffer on the stack to process the final
-chunk of 1420 % 64 == 12 bytes.
-
-Let's optimize for this case as well, by letting chacha_4block_xor_neon()
-deal with any input size between 64 and 256 bytes, using NEON permutation
-instructions and overlapping loads and stores. This way, the 140 byte
-tail of a 1420 byte input buffer can simply be processed in one go.
-
-This results in the following performance improvements for 1420 byte
-blocks, without significant impact on power-of-2 input sizes. (Note
-that Raspberry Pi is widely used in combination with a 32-bit kernel,
-even though the core is 64-bit capable)
-
-   Cortex-A8  (BeagleBone)       :   7%
-   Cortex-A15 (Calxeda Midway)   :  21%
-   Cortex-A53 (Raspberry Pi 3)   :   3%
-   Cortex-A72 (Raspberry Pi 4)   :  19%
-
-Cc: Eric Biggers <ebiggers@google.com>
-Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/chacha-glue.c      | 34 +++++------
- arch/arm/crypto/chacha-neon-core.S | 97 +++++++++++++++++++++++++++---
- 2 files changed, 107 insertions(+), 24 deletions(-)
-
---- a/arch/arm/crypto/chacha-glue.c
-+++ b/arch/arm/crypto/chacha-glue.c
-@@ -23,7 +23,7 @@
- asmlinkage void chacha_block_xor_neon(const u32 *state, u8 *dst, const u8 *src,
- 				      int nrounds);
- asmlinkage void chacha_4block_xor_neon(const u32 *state, u8 *dst, const u8 *src,
--				       int nrounds);
-+				       int nrounds, unsigned int nbytes);
- asmlinkage void hchacha_block_arm(const u32 *state, u32 *out, int nrounds);
- asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds);
- 
-@@ -42,24 +42,24 @@ static void chacha_doneon(u32 *state, u8
- {
- 	u8 buf[CHACHA_BLOCK_SIZE];
- 
--	while (bytes >= CHACHA_BLOCK_SIZE * 4) {
--		chacha_4block_xor_neon(state, dst, src, nrounds);
--		bytes -= CHACHA_BLOCK_SIZE * 4;
--		src += CHACHA_BLOCK_SIZE * 4;
--		dst += CHACHA_BLOCK_SIZE * 4;
--		state[12] += 4;
--	}
--	while (bytes >= CHACHA_BLOCK_SIZE) {
--		chacha_block_xor_neon(state, dst, src, nrounds);
--		bytes -= CHACHA_BLOCK_SIZE;
--		src += CHACHA_BLOCK_SIZE;
--		dst += CHACHA_BLOCK_SIZE;
--		state[12]++;
-+	while (bytes > CHACHA_BLOCK_SIZE) {
-+		unsigned int l = min(bytes, CHACHA_BLOCK_SIZE * 4U);
-+
-+		chacha_4block_xor_neon(state, dst, src, nrounds, l);
-+		bytes -= l;
-+		src += l;
-+		dst += l;
-+		state[12] += DIV_ROUND_UP(l, CHACHA_BLOCK_SIZE);
- 	}
- 	if (bytes) {
--		memcpy(buf, src, bytes);
--		chacha_block_xor_neon(state, buf, buf, nrounds);
--		memcpy(dst, buf, bytes);
-+		const u8 *s = src;
-+		u8 *d = dst;
-+
-+		if (bytes != CHACHA_BLOCK_SIZE)
-+			s = d = memcpy(buf, src, bytes);
-+		chacha_block_xor_neon(state, d, s, nrounds);
-+		if (d != dst)
-+			memcpy(dst, buf, bytes);
- 	}
- }
- 
---- a/arch/arm/crypto/chacha-neon-core.S
-+++ b/arch/arm/crypto/chacha-neon-core.S
-@@ -47,6 +47,7 @@
-   */
- 
- #include <linux/linkage.h>
-+#include <asm/cache.h>
- 
- 	.text
- 	.fpu		neon
-@@ -205,7 +206,7 @@ ENDPROC(hchacha_block_neon)
- 
- 	.align		5
- ENTRY(chacha_4block_xor_neon)
--	push		{r4-r5}
-+	push		{r4, lr}
- 	mov		r4, sp			// preserve the stack pointer
- 	sub		ip, sp, #0x20		// allocate a 32 byte buffer
- 	bic		ip, ip, #0x1f		// aligned to 32 bytes
-@@ -229,10 +230,10 @@ ENTRY(chacha_4block_xor_neon)
- 	vld1.32		{q0-q1}, [r0]
- 	vld1.32		{q2-q3}, [ip]
- 
--	adr		r5, .Lctrinc
-+	adr		lr, .Lctrinc
- 	vdup.32		q15, d7[1]
- 	vdup.32		q14, d7[0]
--	vld1.32		{q4}, [r5, :128]
-+	vld1.32		{q4}, [lr, :128]
- 	vdup.32		q13, d6[1]
- 	vdup.32		q12, d6[0]
- 	vdup.32		q11, d5[1]
-@@ -455,7 +456,7 @@ ENTRY(chacha_4block_xor_neon)
- 
- 	// Re-interleave the words in the first two rows of each block (x0..7).
- 	// Also add the counter values 0-3 to x12[0-3].
--	  vld1.32	{q8}, [r5, :128]	// load counter values 0-3
-+	  vld1.32	{q8}, [lr, :128]	// load counter values 0-3
- 	vzip.32		q0, q1			// => (0 1 0 1) (0 1 0 1)
- 	vzip.32		q2, q3			// => (2 3 2 3) (2 3 2 3)
- 	vzip.32		q4, q5			// => (4 5 4 5) (4 5 4 5)
-@@ -493,6 +494,8 @@ ENTRY(chacha_4block_xor_neon)
- 
- 	// Re-interleave the words in the last two rows of each block (x8..15).
- 	vld1.32		{q8-q9}, [sp, :256]
-+	  mov		sp, r4		// restore original stack pointer
-+	  ldr		r4, [r4, #8]	// load number of bytes
- 	vzip.32		q12, q13	// => (12 13 12 13) (12 13 12 13)
- 	vzip.32		q14, q15	// => (14 15 14 15) (14 15 14 15)
- 	vzip.32		q8, q9		// => (8 9 8 9) (8 9 8 9)
-@@ -520,41 +523,121 @@ ENTRY(chacha_4block_xor_neon)
- 	// XOR the rest of the data with the keystream
- 
- 	vld1.8		{q0-q1}, [r2]!
-+	subs		r4, r4, #96
- 	veor		q0, q0, q8
- 	veor		q1, q1, q12
-+	ble		.Lle96
- 	vst1.8		{q0-q1}, [r1]!
- 
- 	vld1.8		{q0-q1}, [r2]!
-+	subs		r4, r4, #32
- 	veor		q0, q0, q2
- 	veor		q1, q1, q6
-+	ble		.Lle128
- 	vst1.8		{q0-q1}, [r1]!
- 
- 	vld1.8		{q0-q1}, [r2]!
-+	subs		r4, r4, #32
- 	veor		q0, q0, q10
- 	veor		q1, q1, q14
-+	ble		.Lle160
- 	vst1.8		{q0-q1}, [r1]!
- 
- 	vld1.8		{q0-q1}, [r2]!
-+	subs		r4, r4, #32
- 	veor		q0, q0, q4
- 	veor		q1, q1, q5
-+	ble		.Lle192
- 	vst1.8		{q0-q1}, [r1]!
- 
- 	vld1.8		{q0-q1}, [r2]!
-+	subs		r4, r4, #32
- 	veor		q0, q0, q9
- 	veor		q1, q1, q13
-+	ble		.Lle224
- 	vst1.8		{q0-q1}, [r1]!
- 
- 	vld1.8		{q0-q1}, [r2]!
-+	subs		r4, r4, #32
- 	veor		q0, q0, q3
- 	veor		q1, q1, q7
-+	blt		.Llt256
-+.Lout:
- 	vst1.8		{q0-q1}, [r1]!
- 
- 	vld1.8		{q0-q1}, [r2]
--	  mov		sp, r4		// restore original stack pointer
- 	veor		q0, q0, q11
- 	veor		q1, q1, q15
- 	vst1.8		{q0-q1}, [r1]
- 
--	pop		{r4-r5}
--	bx		lr
-+	pop		{r4, pc}
-+
-+.Lle192:
-+	vmov		q4, q9
-+	vmov		q5, q13
-+
-+.Lle160:
-+	// nothing to do
-+
-+.Lfinalblock:
-+	// Process the final block if processing less than 4 full blocks.
-+	// Entered with 32 bytes of ChaCha cipher stream in q4-q5, and the
-+	// previous 32 byte output block that still needs to be written at
-+	// [r1] in q0-q1.
-+	beq		.Lfullblock
-+
-+.Lpartialblock:
-+	adr		lr, .Lpermute + 32
-+	add		r2, r2, r4
-+	add		lr, lr, r4
-+	add		r4, r4, r1
-+
-+	vld1.8		{q2-q3}, [lr]
-+	vld1.8		{q6-q7}, [r2]
-+
-+	add		r4, r4, #32
-+
-+	vtbl.8		d4, {q4-q5}, d4
-+	vtbl.8		d5, {q4-q5}, d5
-+	vtbl.8		d6, {q4-q5}, d6
-+	vtbl.8		d7, {q4-q5}, d7
-+
-+	veor		q6, q6, q2
-+	veor		q7, q7, q3
-+
-+	vst1.8		{q6-q7}, [r4]	// overlapping stores
-+	vst1.8		{q0-q1}, [r1]
-+	pop		{r4, pc}
-+
-+.Lfullblock:
-+	vmov		q11, q4
-+	vmov		q15, q5
-+	b		.Lout
-+.Lle96:
-+	vmov		q4, q2
-+	vmov		q5, q6
-+	b		.Lfinalblock
-+.Lle128:
-+	vmov		q4, q10
-+	vmov		q5, q14
-+	b		.Lfinalblock
-+.Lle224:
-+	vmov		q4, q3
-+	vmov		q5, q7
-+	b		.Lfinalblock
-+.Llt256:
-+	vmov		q4, q11
-+	vmov		q5, q15
-+	b		.Lpartialblock
- ENDPROC(chacha_4block_xor_neon)
-+
-+	.align		L1_CACHE_SHIFT
-+.Lpermute:
-+	.byte		0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
-+	.byte		0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
-+	.byte		0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17
-+	.byte		0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f
-+	.byte		0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
-+	.byte		0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
-+	.byte		0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17
-+	.byte		0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0069-crypto-arm64-chacha-simplify-tail-block-handling.patch b/target/linux/generic/backport-5.4/080-wireguard-0069-crypto-arm64-chacha-simplify-tail-block-handling.patch
deleted file mode 100644
index 42e9048b99..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0069-crypto-arm64-chacha-simplify-tail-block-handling.patch
+++ /dev/null
@@ -1,324 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Fri, 6 Nov 2020 17:39:38 +0100
-Subject: [PATCH] crypto: arm64/chacha - simplify tail block handling
-
-commit c4fc6328d6c67690a7e6e03f43a5a976a13120ef upstream.
-
-Based on lessons learnt from optimizing the 32-bit version of this driver,
-we can simplify the arm64 version considerably, by reordering the final
-two stores when the last block is not a multiple of 64 bytes. This removes
-the need to use permutation instructions to calculate the elements that are
-clobbered by the final overlapping store, given that the store of the
-penultimate block now follows it, and that one carries the correct values
-for those elements already.
-
-While at it, simplify the overlapping loads as well, by calculating the
-address of the final overlapping load upfront, and switching to this
-address for every load that would otherwise extend past the end of the
-source buffer.
-
-There is no impact on performance, but the resulting code is substantially
-smaller and easier to follow.
-
-Cc: Eric Biggers <ebiggers@google.com>
-Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm64/crypto/chacha-neon-core.S | 193 ++++++++++-----------------
- 1 file changed, 69 insertions(+), 124 deletions(-)
-
---- a/arch/arm64/crypto/chacha-neon-core.S
-+++ b/arch/arm64/crypto/chacha-neon-core.S
-@@ -195,7 +195,6 @@ ENTRY(chacha_4block_xor_neon)
- 	adr_l		x10, .Lpermute
- 	and		x5, x4, #63
- 	add		x10, x10, x5
--	add		x11, x10, #64
- 
- 	//
- 	// This function encrypts four consecutive ChaCha blocks by loading
-@@ -645,11 +644,11 @@ CPU_BE(	  rev		a15, a15	)
- 	zip2		v31.4s, v14.4s, v15.4s
- 	  eor		a15, a15, w9
- 
--	mov		x3, #64
-+	add		x3, x2, x4
-+	sub		x3, x3, #128		// start of last block
-+
- 	subs		x5, x4, #128
--	add		x6, x5, x2
--	csel		x3, x3, xzr, ge
--	csel		x2, x2, x6, ge
-+	csel		x2, x2, x3, ge
- 
- 	// interleave 64-bit words in state n, n+2
- 	zip1		v0.2d, v16.2d, v18.2d
-@@ -658,13 +657,10 @@ CPU_BE(	  rev		a15, a15	)
- 	zip1		v8.2d, v17.2d, v19.2d
- 	zip2		v12.2d, v17.2d, v19.2d
- 	  stp		a2, a3, [x1, #-56]
--	ld1		{v16.16b-v19.16b}, [x2], x3
- 
- 	subs		x6, x4, #192
--	ccmp		x3, xzr, #4, lt
--	add		x7, x6, x2
--	csel		x3, x3, xzr, eq
--	csel		x2, x2, x7, eq
-+	ld1		{v16.16b-v19.16b}, [x2], #64
-+	csel		x2, x2, x3, ge
- 
- 	zip1		v1.2d, v20.2d, v22.2d
- 	zip2		v5.2d, v20.2d, v22.2d
-@@ -672,13 +668,10 @@ CPU_BE(	  rev		a15, a15	)
- 	zip1		v9.2d, v21.2d, v23.2d
- 	zip2		v13.2d, v21.2d, v23.2d
- 	  stp		a6, a7, [x1, #-40]
--	ld1		{v20.16b-v23.16b}, [x2], x3
- 
- 	subs		x7, x4, #256
--	ccmp		x3, xzr, #4, lt
--	add		x8, x7, x2
--	csel		x3, x3, xzr, eq
--	csel		x2, x2, x8, eq
-+	ld1		{v20.16b-v23.16b}, [x2], #64
-+	csel		x2, x2, x3, ge
- 
- 	zip1		v2.2d, v24.2d, v26.2d
- 	zip2		v6.2d, v24.2d, v26.2d
-@@ -686,12 +679,10 @@ CPU_BE(	  rev		a15, a15	)
- 	zip1		v10.2d, v25.2d, v27.2d
- 	zip2		v14.2d, v25.2d, v27.2d
- 	  stp		a10, a11, [x1, #-24]
--	ld1		{v24.16b-v27.16b}, [x2], x3
- 
- 	subs		x8, x4, #320
--	ccmp		x3, xzr, #4, lt
--	add		x9, x8, x2
--	csel		x2, x2, x9, eq
-+	ld1		{v24.16b-v27.16b}, [x2], #64
-+	csel		x2, x2, x3, ge
- 
- 	zip1		v3.2d, v28.2d, v30.2d
- 	zip2		v7.2d, v28.2d, v30.2d
-@@ -699,151 +690,105 @@ CPU_BE(	  rev		a15, a15	)
- 	zip1		v11.2d, v29.2d, v31.2d
- 	zip2		v15.2d, v29.2d, v31.2d
- 	  stp		a14, a15, [x1, #-8]
-+
-+	tbnz		x5, #63, .Lt128
- 	ld1		{v28.16b-v31.16b}, [x2]
- 
- 	// xor with corresponding input, write to output
--	tbnz		x5, #63, 0f
- 	eor		v16.16b, v16.16b, v0.16b
- 	eor		v17.16b, v17.16b, v1.16b
- 	eor		v18.16b, v18.16b, v2.16b
- 	eor		v19.16b, v19.16b, v3.16b
--	st1		{v16.16b-v19.16b}, [x1], #64
--	cbz		x5, .Lout
- 
--	tbnz		x6, #63, 1f
-+	tbnz		x6, #63, .Lt192
-+
- 	eor		v20.16b, v20.16b, v4.16b
- 	eor		v21.16b, v21.16b, v5.16b
- 	eor		v22.16b, v22.16b, v6.16b
- 	eor		v23.16b, v23.16b, v7.16b
--	st1		{v20.16b-v23.16b}, [x1], #64
--	cbz		x6, .Lout
- 
--	tbnz		x7, #63, 2f
-+	st1		{v16.16b-v19.16b}, [x1], #64
-+	tbnz		x7, #63, .Lt256
-+
- 	eor		v24.16b, v24.16b, v8.16b
- 	eor		v25.16b, v25.16b, v9.16b
- 	eor		v26.16b, v26.16b, v10.16b
- 	eor		v27.16b, v27.16b, v11.16b
--	st1		{v24.16b-v27.16b}, [x1], #64
--	cbz		x7, .Lout
- 
--	tbnz		x8, #63, 3f
-+	st1		{v20.16b-v23.16b}, [x1], #64
-+	tbnz		x8, #63, .Lt320
-+
- 	eor		v28.16b, v28.16b, v12.16b
- 	eor		v29.16b, v29.16b, v13.16b
- 	eor		v30.16b, v30.16b, v14.16b
- 	eor		v31.16b, v31.16b, v15.16b
-+
-+	st1		{v24.16b-v27.16b}, [x1], #64
- 	st1		{v28.16b-v31.16b}, [x1]
- 
- .Lout:	frame_pop
- 	ret
- 
--	// fewer than 128 bytes of in/output
--0:	ld1		{v8.16b}, [x10]
--	ld1		{v9.16b}, [x11]
--	movi		v10.16b, #16
--	sub		x2, x1, #64
--	add		x1, x1, x5
--	ld1		{v16.16b-v19.16b}, [x2]
--	tbl		v4.16b, {v0.16b-v3.16b}, v8.16b
--	tbx		v20.16b, {v16.16b-v19.16b}, v9.16b
--	add		v8.16b, v8.16b, v10.16b
--	add		v9.16b, v9.16b, v10.16b
--	tbl		v5.16b, {v0.16b-v3.16b}, v8.16b
--	tbx		v21.16b, {v16.16b-v19.16b}, v9.16b
--	add		v8.16b, v8.16b, v10.16b
--	add		v9.16b, v9.16b, v10.16b
--	tbl		v6.16b, {v0.16b-v3.16b}, v8.16b
--	tbx		v22.16b, {v16.16b-v19.16b}, v9.16b
--	add		v8.16b, v8.16b, v10.16b
--	add		v9.16b, v9.16b, v10.16b
--	tbl		v7.16b, {v0.16b-v3.16b}, v8.16b
--	tbx		v23.16b, {v16.16b-v19.16b}, v9.16b
--
--	eor		v20.16b, v20.16b, v4.16b
--	eor		v21.16b, v21.16b, v5.16b
--	eor		v22.16b, v22.16b, v6.16b
--	eor		v23.16b, v23.16b, v7.16b
--	st1		{v20.16b-v23.16b}, [x1]
--	b		.Lout
--
- 	// fewer than 192 bytes of in/output
--1:	ld1		{v8.16b}, [x10]
--	ld1		{v9.16b}, [x11]
--	movi		v10.16b, #16
--	add		x1, x1, x6
--	tbl		v0.16b, {v4.16b-v7.16b}, v8.16b
--	tbx		v20.16b, {v16.16b-v19.16b}, v9.16b
--	add		v8.16b, v8.16b, v10.16b
--	add		v9.16b, v9.16b, v10.16b
--	tbl		v1.16b, {v4.16b-v7.16b}, v8.16b
--	tbx		v21.16b, {v16.16b-v19.16b}, v9.16b
--	add		v8.16b, v8.16b, v10.16b
--	add		v9.16b, v9.16b, v10.16b
--	tbl		v2.16b, {v4.16b-v7.16b}, v8.16b
--	tbx		v22.16b, {v16.16b-v19.16b}, v9.16b
--	add		v8.16b, v8.16b, v10.16b
--	add		v9.16b, v9.16b, v10.16b
--	tbl		v3.16b, {v4.16b-v7.16b}, v8.16b
--	tbx		v23.16b, {v16.16b-v19.16b}, v9.16b
--
--	eor		v20.16b, v20.16b, v0.16b
--	eor		v21.16b, v21.16b, v1.16b
--	eor		v22.16b, v22.16b, v2.16b
--	eor		v23.16b, v23.16b, v3.16b
--	st1		{v20.16b-v23.16b}, [x1]
-+.Lt192:	cbz		x5, 1f				// exactly 128 bytes?
-+	ld1		{v28.16b-v31.16b}, [x10]
-+	add		x5, x5, x1
-+	tbl		v28.16b, {v4.16b-v7.16b}, v28.16b
-+	tbl		v29.16b, {v4.16b-v7.16b}, v29.16b
-+	tbl		v30.16b, {v4.16b-v7.16b}, v30.16b
-+	tbl		v31.16b, {v4.16b-v7.16b}, v31.16b
-+
-+0:	eor		v20.16b, v20.16b, v28.16b
-+	eor		v21.16b, v21.16b, v29.16b
-+	eor		v22.16b, v22.16b, v30.16b
-+	eor		v23.16b, v23.16b, v31.16b
-+	st1		{v20.16b-v23.16b}, [x5]		// overlapping stores
-+1:	st1		{v16.16b-v19.16b}, [x1]
- 	b		.Lout
- 
-+	// fewer than 128 bytes of in/output
-+.Lt128:	ld1		{v28.16b-v31.16b}, [x10]
-+	add		x5, x5, x1
-+	sub		x1, x1, #64
-+	tbl		v28.16b, {v0.16b-v3.16b}, v28.16b
-+	tbl		v29.16b, {v0.16b-v3.16b}, v29.16b
-+	tbl		v30.16b, {v0.16b-v3.16b}, v30.16b
-+	tbl		v31.16b, {v0.16b-v3.16b}, v31.16b
-+	ld1		{v16.16b-v19.16b}, [x1]		// reload first output block
-+	b		0b
-+
- 	// fewer than 256 bytes of in/output
--2:	ld1		{v4.16b}, [x10]
--	ld1		{v5.16b}, [x11]
--	movi		v6.16b, #16
--	add		x1, x1, x7
-+.Lt256:	cbz		x6, 2f				// exactly 192 bytes?
-+	ld1		{v4.16b-v7.16b}, [x10]
-+	add		x6, x6, x1
- 	tbl		v0.16b, {v8.16b-v11.16b}, v4.16b
--	tbx		v24.16b, {v20.16b-v23.16b}, v5.16b
--	add		v4.16b, v4.16b, v6.16b
--	add		v5.16b, v5.16b, v6.16b
--	tbl		v1.16b, {v8.16b-v11.16b}, v4.16b
--	tbx		v25.16b, {v20.16b-v23.16b}, v5.16b
--	add		v4.16b, v4.16b, v6.16b
--	add		v5.16b, v5.16b, v6.16b
--	tbl		v2.16b, {v8.16b-v11.16b}, v4.16b
--	tbx		v26.16b, {v20.16b-v23.16b}, v5.16b
--	add		v4.16b, v4.16b, v6.16b
--	add		v5.16b, v5.16b, v6.16b
--	tbl		v3.16b, {v8.16b-v11.16b}, v4.16b
--	tbx		v27.16b, {v20.16b-v23.16b}, v5.16b
--
--	eor		v24.16b, v24.16b, v0.16b
--	eor		v25.16b, v25.16b, v1.16b
--	eor		v26.16b, v26.16b, v2.16b
--	eor		v27.16b, v27.16b, v3.16b
--	st1		{v24.16b-v27.16b}, [x1]
-+	tbl		v1.16b, {v8.16b-v11.16b}, v5.16b
-+	tbl		v2.16b, {v8.16b-v11.16b}, v6.16b
-+	tbl		v3.16b, {v8.16b-v11.16b}, v7.16b
-+
-+	eor		v28.16b, v28.16b, v0.16b
-+	eor		v29.16b, v29.16b, v1.16b
-+	eor		v30.16b, v30.16b, v2.16b
-+	eor		v31.16b, v31.16b, v3.16b
-+	st1		{v28.16b-v31.16b}, [x6]		// overlapping stores
-+2:	st1		{v20.16b-v23.16b}, [x1]
- 	b		.Lout
- 
- 	// fewer than 320 bytes of in/output
--3:	ld1		{v4.16b}, [x10]
--	ld1		{v5.16b}, [x11]
--	movi		v6.16b, #16
--	add		x1, x1, x8
-+.Lt320:	cbz		x7, 3f				// exactly 256 bytes?
-+	ld1		{v4.16b-v7.16b}, [x10]
-+	add		x7, x7, x1
- 	tbl		v0.16b, {v12.16b-v15.16b}, v4.16b
--	tbx		v28.16b, {v24.16b-v27.16b}, v5.16b
--	add		v4.16b, v4.16b, v6.16b
--	add		v5.16b, v5.16b, v6.16b
--	tbl		v1.16b, {v12.16b-v15.16b}, v4.16b
--	tbx		v29.16b, {v24.16b-v27.16b}, v5.16b
--	add		v4.16b, v4.16b, v6.16b
--	add		v5.16b, v5.16b, v6.16b
--	tbl		v2.16b, {v12.16b-v15.16b}, v4.16b
--	tbx		v30.16b, {v24.16b-v27.16b}, v5.16b
--	add		v4.16b, v4.16b, v6.16b
--	add		v5.16b, v5.16b, v6.16b
--	tbl		v3.16b, {v12.16b-v15.16b}, v4.16b
--	tbx		v31.16b, {v24.16b-v27.16b}, v5.16b
-+	tbl		v1.16b, {v12.16b-v15.16b}, v5.16b
-+	tbl		v2.16b, {v12.16b-v15.16b}, v6.16b
-+	tbl		v3.16b, {v12.16b-v15.16b}, v7.16b
- 
- 	eor		v28.16b, v28.16b, v0.16b
- 	eor		v29.16b, v29.16b, v1.16b
- 	eor		v30.16b, v30.16b, v2.16b
- 	eor		v31.16b, v31.16b, v3.16b
--	st1		{v28.16b-v31.16b}, [x1]
-+	st1		{v28.16b-v31.16b}, [x7]		// overlapping stores
-+3:	st1		{v24.16b-v27.16b}, [x1]
- 	b		.Lout
- ENDPROC(chacha_4block_xor_neon)
- 
-@@ -851,7 +796,7 @@ ENDPROC(chacha_4block_xor_neon)
- 	.align		L1_CACHE_SHIFT
- .Lpermute:
- 	.set		.Li, 0
--	.rept		192
-+	.rept		128
- 	.byte		(.Li - 64)
- 	.set		.Li, .Li + 1
- 	.endr
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0070-crypto-lib-chacha20poly1305-define-empty-module-exit.patch b/target/linux/generic/backport-5.4/080-wireguard-0070-crypto-lib-chacha20poly1305-define-empty-module-exit.patch
deleted file mode 100644
index 084ae74bfd..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0070-crypto-lib-chacha20poly1305-define-empty-module-exit.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 15 Jan 2021 20:30:12 +0100
-Subject: [PATCH] crypto: lib/chacha20poly1305 - define empty module exit
- function
-
-commit ac88c322d0f2917d41d13553c69e9d7f043c8b6f upstream.
-
-With no mod_exit function, users are unable to unload the module after
-use. I'm not aware of any reason why module unloading should be
-prohibited for this one, so this commit simply adds an empty exit
-function.
-
-Reported-and-tested-by: John Donnelly <john.p.donnelly@oracle.com>
-Acked-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- lib/crypto/chacha20poly1305.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/lib/crypto/chacha20poly1305.c
-+++ b/lib/crypto/chacha20poly1305.c
-@@ -364,7 +364,12 @@ static int __init mod_init(void)
- 	return 0;
- }
- 
-+static void __exit mod_exit(void)
-+{
-+}
-+
- module_init(mod_init);
-+module_exit(mod_exit);
- MODULE_LICENSE("GPL v2");
- MODULE_DESCRIPTION("ChaCha20Poly1305 AEAD construction");
- MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0071-crypto-arm-chacha-neon-add-missing-counter-increment.patch b/target/linux/generic/backport-5.4/080-wireguard-0071-crypto-arm-chacha-neon-add-missing-counter-increment.patch
deleted file mode 100644
index ea3cc802a9..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0071-crypto-arm-chacha-neon-add-missing-counter-increment.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Sun, 13 Dec 2020 15:39:29 +0100
-Subject: [PATCH] crypto: arm/chacha-neon - add missing counter increment
-
-commit fd16931a2f518a32753920ff20895e5cf04c8ff1 upstream.
-
-Commit 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block
-size multiples") refactored the chacha block handling in the glue code in
-a way that may result in the counter increment to be omitted when calling
-chacha_block_xor_neon() to process a full block. This violates the skcipher
-API, which requires that the output IV is suitable for handling more input
-as long as the preceding input has been presented in round multiples of the
-block size. Also, the same code is exposed via the chacha library interface
-whose callers may actually rely on this increment to occur even for final
-blocks that are smaller than the chacha block size.
-
-So increment the counter after calling chacha_block_xor_neon().
-
-Fixes: 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block size multiples")
-Reported-by: Eric Biggers <ebiggers@kernel.org>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/chacha-glue.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/crypto/chacha-glue.c
-+++ b/arch/arm/crypto/chacha-glue.c
-@@ -60,6 +60,7 @@ static void chacha_doneon(u32 *state, u8
- 		chacha_block_xor_neon(state, d, s, nrounds);
- 		if (d != dst)
- 			memcpy(dst, buf, bytes);
-+		state[12]++;
- 	}
- }
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0072-net-WireGuard-secure-network-tunnel.patch b/target/linux/generic/backport-5.4/080-wireguard-0072-net-WireGuard-secure-network-tunnel.patch
deleted file mode 100644
index a29da1e7b2..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0072-net-WireGuard-secure-network-tunnel.patch
+++ /dev/null
@@ -1,8071 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Mon, 9 Dec 2019 00:27:34 +0100
-Subject: [PATCH] net: WireGuard secure network tunnel
-
-commit e7096c131e5161fa3b8e52a650d7719d2857adfd upstream.
-
-WireGuard is a layer 3 secure networking tunnel made specifically for
-the kernel, that aims to be much simpler and easier to audit than IPsec.
-Extensive documentation and description of the protocol and
-considerations, along with formal proofs of the cryptography, are
-available at:
-
-  * https://www.wireguard.com/
-  * https://www.wireguard.com/papers/wireguard.pdf
-
-This commit implements WireGuard as a simple network device driver,
-accessible in the usual RTNL way used by virtual network drivers. It
-makes use of the udp_tunnel APIs, GRO, GSO, NAPI, and the usual set of
-networking subsystem APIs. It has a somewhat novel multicore queueing
-system designed for maximum throughput and minimal latency of encryption
-operations, but it is implemented modestly using workqueues and NAPI.
-Configuration is done via generic Netlink, and following a review from
-the Netlink maintainer a year ago, several high profile userspace tools
-have already implemented the API.
-
-This commit also comes with several different tests, both in-kernel
-tests and out-of-kernel tests based on network namespaces, taking profit
-of the fact that sockets used by WireGuard intentionally stay in the
-namespace the WireGuard interface was originally created, exactly like
-the semantics of userspace tun devices. See wireguard.com/netns/ for
-pictures and examples.
-
-The source code is fairly short, but rather than combining everything
-into a single file, WireGuard is developed as cleanly separable files,
-making auditing and comprehension easier. Things are laid out as
-follows:
-
-  * noise.[ch], cookie.[ch], messages.h: These implement the bulk of the
-    cryptographic aspects of the protocol, and are mostly data-only in
-    nature, taking in buffers of bytes and spitting out buffers of
-    bytes. They also handle reference counting for their various shared
-    pieces of data, like keys and key lists.
-
-  * ratelimiter.[ch]: Used as an integral part of cookie.[ch] for
-    ratelimiting certain types of cryptographic operations in accordance
-    with particular WireGuard semantics.
-
-  * allowedips.[ch], peerlookup.[ch]: The main lookup structures of
-    WireGuard, the former being trie-like with particular semantics, an
-    integral part of the design of the protocol, and the latter just
-    being nice helper functions around the various hashtables we use.
-
-  * device.[ch]: Implementation of functions for the netdevice and for
-    rtnl, responsible for maintaining the life of a given interface and
-    wiring it up to the rest of WireGuard.
-
-  * peer.[ch]: Each interface has a list of peers, with helper functions
-    available here for creation, destruction, and reference counting.
-
-  * socket.[ch]: Implementation of functions related to udp_socket and
-    the general set of kernel socket APIs, for sending and receiving
-    ciphertext UDP packets, and taking care of WireGuard-specific sticky
-    socket routing semantics for the automatic roaming.
-
-  * netlink.[ch]: Userspace API entry point for configuring WireGuard
-    peers and devices. The API has been implemented by several userspace
-    tools and network management utility, and the WireGuard project
-    distributes the basic wg(8) tool.
-
-  * queueing.[ch]: Shared function on the rx and tx path for handling
-    the various queues used in the multicore algorithms.
-
-  * send.c: Handles encrypting outgoing packets in parallel on
-    multiple cores, before sending them in order on a single core, via
-    workqueues and ring buffers. Also handles sending handshake and cookie
-    messages as part of the protocol, in parallel.
-
-  * receive.c: Handles decrypting incoming packets in parallel on
-    multiple cores, before passing them off in order to be ingested via
-    the rest of the networking subsystem with GRO via the typical NAPI
-    poll function. Also handles receiving handshake and cookie messages
-    as part of the protocol, in parallel.
-
-  * timers.[ch]: Uses the timer wheel to implement protocol particular
-    event timeouts, and gives a set of very simple event-driven entry
-    point functions for callers.
-
-  * main.c, version.h: Initialization and deinitialization of the module.
-
-  * selftest/*.h: Runtime unit tests for some of the most security
-    sensitive functions.
-
-  * tools/testing/selftests/wireguard/netns.sh: Aforementioned testing
-    script using network namespaces.
-
-This commit aims to be as self-contained as possible, implementing
-WireGuard as a standalone module not needing much special handling or
-coordination from the network subsystem. I expect for future
-optimizations to the network stack to positively improve WireGuard, and
-vice-versa, but for the time being, this exists as intentionally
-standalone.
-
-We introduce a menu option for CONFIG_WIREGUARD, as well as providing a
-verbose debug log and self-tests via CONFIG_WIREGUARD_DEBUG.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Cc: David Miller <davem@davemloft.net>
-Cc: Greg KH <gregkh@linuxfoundation.org>
-Cc: Linus Torvalds <torvalds@linux-foundation.org>
-Cc: Herbert Xu <herbert@gondor.apana.org.au>
-Cc: linux-crypto@vger.kernel.org
-Cc: linux-kernel@vger.kernel.org
-Cc: netdev@vger.kernel.org
-Signed-off-by: David S. Miller <davem@davemloft.net>
-[Jason: ported to 5.4 by doing the following:
- - wg_get_device_start uses genl_family_attrbuf
- - trival skb_redirect_reset change from 2c64605b590e is folded in
- - skb_list_walk_safe was already backported prior]
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- MAINTAINERS                                  |   8 +
- drivers/net/Kconfig                          |  41 +
- drivers/net/Makefile                         |   1 +
- drivers/net/wireguard/Makefile               |  18 +
- drivers/net/wireguard/allowedips.c           | 381 +++++++++
- drivers/net/wireguard/allowedips.h           |  59 ++
- drivers/net/wireguard/cookie.c               | 236 ++++++
- drivers/net/wireguard/cookie.h               |  59 ++
- drivers/net/wireguard/device.c               | 458 ++++++++++
- drivers/net/wireguard/device.h               |  65 ++
- drivers/net/wireguard/main.c                 |  64 ++
- drivers/net/wireguard/messages.h             | 128 +++
- drivers/net/wireguard/netlink.c              | 648 +++++++++++++++
- drivers/net/wireguard/netlink.h              |  12 +
- drivers/net/wireguard/noise.c                | 828 +++++++++++++++++++
- drivers/net/wireguard/noise.h                | 137 +++
- drivers/net/wireguard/peer.c                 | 240 ++++++
- drivers/net/wireguard/peer.h                 |  83 ++
- drivers/net/wireguard/peerlookup.c           | 221 +++++
- drivers/net/wireguard/peerlookup.h           |  64 ++
- drivers/net/wireguard/queueing.c             |  53 ++
- drivers/net/wireguard/queueing.h             | 197 +++++
- drivers/net/wireguard/ratelimiter.c          | 223 +++++
- drivers/net/wireguard/ratelimiter.h          |  19 +
- drivers/net/wireguard/receive.c              | 595 +++++++++++++
- drivers/net/wireguard/selftest/allowedips.c  | 683 +++++++++++++++
- drivers/net/wireguard/selftest/counter.c     | 104 +++
- drivers/net/wireguard/selftest/ratelimiter.c | 226 +++++
- drivers/net/wireguard/send.c                 | 413 +++++++++
- drivers/net/wireguard/socket.c               | 437 ++++++++++
- drivers/net/wireguard/socket.h               |  44 +
- drivers/net/wireguard/timers.c               | 243 ++++++
- drivers/net/wireguard/timers.h               |  31 +
- drivers/net/wireguard/version.h              |   1 +
- include/uapi/linux/wireguard.h               | 196 +++++
- tools/testing/selftests/wireguard/netns.sh   | 537 ++++++++++++
- 36 files changed, 7753 insertions(+)
- create mode 100644 drivers/net/wireguard/Makefile
- create mode 100644 drivers/net/wireguard/allowedips.c
- create mode 100644 drivers/net/wireguard/allowedips.h
- create mode 100644 drivers/net/wireguard/cookie.c
- create mode 100644 drivers/net/wireguard/cookie.h
- create mode 100644 drivers/net/wireguard/device.c
- create mode 100644 drivers/net/wireguard/device.h
- create mode 100644 drivers/net/wireguard/main.c
- create mode 100644 drivers/net/wireguard/messages.h
- create mode 100644 drivers/net/wireguard/netlink.c
- create mode 100644 drivers/net/wireguard/netlink.h
- create mode 100644 drivers/net/wireguard/noise.c
- create mode 100644 drivers/net/wireguard/noise.h
- create mode 100644 drivers/net/wireguard/peer.c
- create mode 100644 drivers/net/wireguard/peer.h
- create mode 100644 drivers/net/wireguard/peerlookup.c
- create mode 100644 drivers/net/wireguard/peerlookup.h
- create mode 100644 drivers/net/wireguard/queueing.c
- create mode 100644 drivers/net/wireguard/queueing.h
- create mode 100644 drivers/net/wireguard/ratelimiter.c
- create mode 100644 drivers/net/wireguard/ratelimiter.h
- create mode 100644 drivers/net/wireguard/receive.c
- create mode 100644 drivers/net/wireguard/selftest/allowedips.c
- create mode 100644 drivers/net/wireguard/selftest/counter.c
- create mode 100644 drivers/net/wireguard/selftest/ratelimiter.c
- create mode 100644 drivers/net/wireguard/send.c
- create mode 100644 drivers/net/wireguard/socket.c
- create mode 100644 drivers/net/wireguard/socket.h
- create mode 100644 drivers/net/wireguard/timers.c
- create mode 100644 drivers/net/wireguard/timers.h
- create mode 100644 drivers/net/wireguard/version.h
- create mode 100644 include/uapi/linux/wireguard.h
- create mode 100755 tools/testing/selftests/wireguard/netns.sh
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -17585,6 +17585,14 @@ L:	linux-gpio@vger.kernel.org
- S:	Maintained
- F:	drivers/gpio/gpio-ws16c48.c
- 
-+WIREGUARD SECURE NETWORK TUNNEL
-+M:	Jason A. Donenfeld <Jason@zx2c4.com>
-+S:	Maintained
-+F:	drivers/net/wireguard/
-+F:	tools/testing/selftests/wireguard/
-+L:	wireguard@lists.zx2c4.com
-+L:	netdev@vger.kernel.org
-+
- WISTRON LAPTOP BUTTON DRIVER
- M:	Miloslav Trmac <mitr@volny.cz>
- S:	Maintained
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -71,6 +71,47 @@ config DUMMY
- 	  To compile this driver as a module, choose M here: the module
- 	  will be called dummy.
- 
-+config WIREGUARD
-+	tristate "WireGuard secure network tunnel"
-+	depends on NET && INET
-+	depends on IPV6 || !IPV6
-+	select NET_UDP_TUNNEL
-+	select DST_CACHE
-+	select CRYPTO
-+	select CRYPTO_LIB_CURVE25519
-+	select CRYPTO_LIB_CHACHA20POLY1305
-+	select CRYPTO_LIB_BLAKE2S
-+	select CRYPTO_CHACHA20_X86_64 if X86 && 64BIT
-+	select CRYPTO_POLY1305_X86_64 if X86 && 64BIT
-+	select CRYPTO_BLAKE2S_X86 if X86 && 64BIT
-+	select CRYPTO_CURVE25519_X86 if X86 && 64BIT
-+	select CRYPTO_CHACHA20_NEON if (ARM || ARM64) && KERNEL_MODE_NEON
-+	select CRYPTO_POLY1305_NEON if ARM64 && KERNEL_MODE_NEON
-+	select CRYPTO_POLY1305_ARM if ARM
-+	select CRYPTO_CURVE25519_NEON if ARM && KERNEL_MODE_NEON
-+	select CRYPTO_CHACHA_MIPS if CPU_MIPS32_R2
-+	select CRYPTO_POLY1305_MIPS if CPU_MIPS32 || (CPU_MIPS64 && 64BIT)
-+	help
-+	  WireGuard is a secure, fast, and easy to use replacement for IPSec
-+	  that uses modern cryptography and clever networking tricks. It's
-+	  designed to be fairly general purpose and abstract enough to fit most
-+	  use cases, while at the same time remaining extremely simple to
-+	  configure. See www.wireguard.com for more info.
-+
-+	  It's safe to say Y or M here, as the driver is very lightweight and
-+	  is only in use when an administrator chooses to add an interface.
-+
-+config WIREGUARD_DEBUG
-+	bool "Debugging checks and verbose messages"
-+	depends on WIREGUARD
-+	help
-+	  This will write log messages for handshake and other events
-+	  that occur for a WireGuard interface. It will also perform some
-+	  extra validation checks and unit tests at various points. This is
-+	  only useful for debugging.
-+
-+	  Say N here unless you know what you're doing.
-+
- config EQUALIZER
- 	tristate "EQL (serial line load balancing) support"
- 	---help---
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_BONDING) += bonding/
- obj-$(CONFIG_IPVLAN) += ipvlan/
- obj-$(CONFIG_IPVTAP) += ipvlan/
- obj-$(CONFIG_DUMMY) += dummy.o
-+obj-$(CONFIG_WIREGUARD) += wireguard/
- obj-$(CONFIG_EQUALIZER) += eql.o
- obj-$(CONFIG_IFB) += ifb.o
- obj-$(CONFIG_MACSEC) += macsec.o
---- /dev/null
-+++ b/drivers/net/wireguard/Makefile
-@@ -0,0 +1,18 @@
-+ccflags-y := -O3
-+ccflags-y += -D'pr_fmt(fmt)=KBUILD_MODNAME ": " fmt'
-+ccflags-$(CONFIG_WIREGUARD_DEBUG) += -DDEBUG
-+wireguard-y := main.o
-+wireguard-y += noise.o
-+wireguard-y += device.o
-+wireguard-y += peer.o
-+wireguard-y += timers.o
-+wireguard-y += queueing.o
-+wireguard-y += send.o
-+wireguard-y += receive.o
-+wireguard-y += socket.o
-+wireguard-y += peerlookup.o
-+wireguard-y += allowedips.o
-+wireguard-y += ratelimiter.o
-+wireguard-y += cookie.o
-+wireguard-y += netlink.o
-+obj-$(CONFIG_WIREGUARD) := wireguard.o
---- /dev/null
-+++ b/drivers/net/wireguard/allowedips.c
-@@ -0,0 +1,381 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include "allowedips.h"
-+#include "peer.h"
-+
-+static void swap_endian(u8 *dst, const u8 *src, u8 bits)
-+{
-+	if (bits == 32) {
-+		*(u32 *)dst = be32_to_cpu(*(const __be32 *)src);
-+	} else if (bits == 128) {
-+		((u64 *)dst)[0] = be64_to_cpu(((const __be64 *)src)[0]);
-+		((u64 *)dst)[1] = be64_to_cpu(((const __be64 *)src)[1]);
-+	}
-+}
-+
-+static void copy_and_assign_cidr(struct allowedips_node *node, const u8 *src,
-+				 u8 cidr, u8 bits)
-+{
-+	node->cidr = cidr;
-+	node->bit_at_a = cidr / 8U;
-+#ifdef __LITTLE_ENDIAN
-+	node->bit_at_a ^= (bits / 8U - 1U) % 8U;
-+#endif
-+	node->bit_at_b = 7U - (cidr % 8U);
-+	node->bitlen = bits;
-+	memcpy(node->bits, src, bits / 8U);
-+}
-+#define CHOOSE_NODE(parent, key) \
-+	parent->bit[(key[parent->bit_at_a] >> parent->bit_at_b) & 1]
-+
-+static void node_free_rcu(struct rcu_head *rcu)
-+{
-+	kfree(container_of(rcu, struct allowedips_node, rcu));
-+}
-+
-+static void push_rcu(struct allowedips_node **stack,
-+		     struct allowedips_node __rcu *p, unsigned int *len)
-+{
-+	if (rcu_access_pointer(p)) {
-+		WARN_ON(IS_ENABLED(DEBUG) && *len >= 128);
-+		stack[(*len)++] = rcu_dereference_raw(p);
-+	}
-+}
-+
-+static void root_free_rcu(struct rcu_head *rcu)
-+{
-+	struct allowedips_node *node, *stack[128] = {
-+		container_of(rcu, struct allowedips_node, rcu) };
-+	unsigned int len = 1;
-+
-+	while (len > 0 && (node = stack[--len])) {
-+		push_rcu(stack, node->bit[0], &len);
-+		push_rcu(stack, node->bit[1], &len);
-+		kfree(node);
-+	}
-+}
-+
-+static void root_remove_peer_lists(struct allowedips_node *root)
-+{
-+	struct allowedips_node *node, *stack[128] = { root };
-+	unsigned int len = 1;
-+
-+	while (len > 0 && (node = stack[--len])) {
-+		push_rcu(stack, node->bit[0], &len);
-+		push_rcu(stack, node->bit[1], &len);
-+		if (rcu_access_pointer(node->peer))
-+			list_del(&node->peer_list);
-+	}
-+}
-+
-+static void walk_remove_by_peer(struct allowedips_node __rcu **top,
-+				struct wg_peer *peer, struct mutex *lock)
-+{
-+#define REF(p) rcu_access_pointer(p)
-+#define DEREF(p) rcu_dereference_protected(*(p), lockdep_is_held(lock))
-+#define PUSH(p) ({                                                             \
-+		WARN_ON(IS_ENABLED(DEBUG) && len >= 128);                      \
-+		stack[len++] = p;                                              \
-+	})
-+
-+	struct allowedips_node __rcu **stack[128], **nptr;
-+	struct allowedips_node *node, *prev;
-+	unsigned int len;
-+
-+	if (unlikely(!peer || !REF(*top)))
-+		return;
-+
-+	for (prev = NULL, len = 0, PUSH(top); len > 0; prev = node) {
-+		nptr = stack[len - 1];
-+		node = DEREF(nptr);
-+		if (!node) {
-+			--len;
-+			continue;
-+		}
-+		if (!prev || REF(prev->bit[0]) == node ||
-+		    REF(prev->bit[1]) == node) {
-+			if (REF(node->bit[0]))
-+				PUSH(&node->bit[0]);
-+			else if (REF(node->bit[1]))
-+				PUSH(&node->bit[1]);
-+		} else if (REF(node->bit[0]) == prev) {
-+			if (REF(node->bit[1]))
-+				PUSH(&node->bit[1]);
-+		} else {
-+			if (rcu_dereference_protected(node->peer,
-+				lockdep_is_held(lock)) == peer) {
-+				RCU_INIT_POINTER(node->peer, NULL);
-+				list_del_init(&node->peer_list);
-+				if (!node->bit[0] || !node->bit[1]) {
-+					rcu_assign_pointer(*nptr, DEREF(
-+					       &node->bit[!REF(node->bit[0])]));
-+					call_rcu(&node->rcu, node_free_rcu);
-+					node = DEREF(nptr);
-+				}
-+			}
-+			--len;
-+		}
-+	}
-+
-+#undef REF
-+#undef DEREF
-+#undef PUSH
-+}
-+
-+static unsigned int fls128(u64 a, u64 b)
-+{
-+	return a ? fls64(a) + 64U : fls64(b);
-+}
-+
-+static u8 common_bits(const struct allowedips_node *node, const u8 *key,
-+		      u8 bits)
-+{
-+	if (bits == 32)
-+		return 32U - fls(*(const u32 *)node->bits ^ *(const u32 *)key);
-+	else if (bits == 128)
-+		return 128U - fls128(
-+			*(const u64 *)&node->bits[0] ^ *(const u64 *)&key[0],
-+			*(const u64 *)&node->bits[8] ^ *(const u64 *)&key[8]);
-+	return 0;
-+}
-+
-+static bool prefix_matches(const struct allowedips_node *node, const u8 *key,
-+			   u8 bits)
-+{
-+	/* This could be much faster if it actually just compared the common
-+	 * bits properly, by precomputing a mask bswap(~0 << (32 - cidr)), and
-+	 * the rest, but it turns out that common_bits is already super fast on
-+	 * modern processors, even taking into account the unfortunate bswap.
-+	 * So, we just inline it like this instead.
-+	 */
-+	return common_bits(node, key, bits) >= node->cidr;
-+}
-+
-+static struct allowedips_node *find_node(struct allowedips_node *trie, u8 bits,
-+					 const u8 *key)
-+{
-+	struct allowedips_node *node = trie, *found = NULL;
-+
-+	while (node && prefix_matches(node, key, bits)) {
-+		if (rcu_access_pointer(node->peer))
-+			found = node;
-+		if (node->cidr == bits)
-+			break;
-+		node = rcu_dereference_bh(CHOOSE_NODE(node, key));
-+	}
-+	return found;
-+}
-+
-+/* Returns a strong reference to a peer */
-+static struct wg_peer *lookup(struct allowedips_node __rcu *root, u8 bits,
-+			      const void *be_ip)
-+{
-+	/* Aligned so it can be passed to fls/fls64 */
-+	u8 ip[16] __aligned(__alignof(u64));
-+	struct allowedips_node *node;
-+	struct wg_peer *peer = NULL;
-+
-+	swap_endian(ip, be_ip, bits);
-+
-+	rcu_read_lock_bh();
-+retry:
-+	node = find_node(rcu_dereference_bh(root), bits, ip);
-+	if (node) {
-+		peer = wg_peer_get_maybe_zero(rcu_dereference_bh(node->peer));
-+		if (!peer)
-+			goto retry;
-+	}
-+	rcu_read_unlock_bh();
-+	return peer;
-+}
-+
-+static bool node_placement(struct allowedips_node __rcu *trie, const u8 *key,
-+			   u8 cidr, u8 bits, struct allowedips_node **rnode,
-+			   struct mutex *lock)
-+{
-+	struct allowedips_node *node = rcu_dereference_protected(trie,
-+						lockdep_is_held(lock));
-+	struct allowedips_node *parent = NULL;
-+	bool exact = false;
-+
-+	while (node && node->cidr <= cidr && prefix_matches(node, key, bits)) {
-+		parent = node;
-+		if (parent->cidr == cidr) {
-+			exact = true;
-+			break;
-+		}
-+		node = rcu_dereference_protected(CHOOSE_NODE(parent, key),
-+						 lockdep_is_held(lock));
-+	}
-+	*rnode = parent;
-+	return exact;
-+}
-+
-+static int add(struct allowedips_node __rcu **trie, u8 bits, const u8 *key,
-+	       u8 cidr, struct wg_peer *peer, struct mutex *lock)
-+{
-+	struct allowedips_node *node, *parent, *down, *newnode;
-+
-+	if (unlikely(cidr > bits || !peer))
-+		return -EINVAL;
-+
-+	if (!rcu_access_pointer(*trie)) {
-+		node = kzalloc(sizeof(*node), GFP_KERNEL);
-+		if (unlikely(!node))
-+			return -ENOMEM;
-+		RCU_INIT_POINTER(node->peer, peer);
-+		list_add_tail(&node->peer_list, &peer->allowedips_list);
-+		copy_and_assign_cidr(node, key, cidr, bits);
-+		rcu_assign_pointer(*trie, node);
-+		return 0;
-+	}
-+	if (node_placement(*trie, key, cidr, bits, &node, lock)) {
-+		rcu_assign_pointer(node->peer, peer);
-+		list_move_tail(&node->peer_list, &peer->allowedips_list);
-+		return 0;
-+	}
-+
-+	newnode = kzalloc(sizeof(*newnode), GFP_KERNEL);
-+	if (unlikely(!newnode))
-+		return -ENOMEM;
-+	RCU_INIT_POINTER(newnode->peer, peer);
-+	list_add_tail(&newnode->peer_list, &peer->allowedips_list);
-+	copy_and_assign_cidr(newnode, key, cidr, bits);
-+
-+	if (!node) {
-+		down = rcu_dereference_protected(*trie, lockdep_is_held(lock));
-+	} else {
-+		down = rcu_dereference_protected(CHOOSE_NODE(node, key),
-+						 lockdep_is_held(lock));
-+		if (!down) {
-+			rcu_assign_pointer(CHOOSE_NODE(node, key), newnode);
-+			return 0;
-+		}
-+	}
-+	cidr = min(cidr, common_bits(down, key, bits));
-+	parent = node;
-+
-+	if (newnode->cidr == cidr) {
-+		rcu_assign_pointer(CHOOSE_NODE(newnode, down->bits), down);
-+		if (!parent)
-+			rcu_assign_pointer(*trie, newnode);
-+		else
-+			rcu_assign_pointer(CHOOSE_NODE(parent, newnode->bits),
-+					   newnode);
-+	} else {
-+		node = kzalloc(sizeof(*node), GFP_KERNEL);
-+		if (unlikely(!node)) {
-+			kfree(newnode);
-+			return -ENOMEM;
-+		}
-+		INIT_LIST_HEAD(&node->peer_list);
-+		copy_and_assign_cidr(node, newnode->bits, cidr, bits);
-+
-+		rcu_assign_pointer(CHOOSE_NODE(node, down->bits), down);
-+		rcu_assign_pointer(CHOOSE_NODE(node, newnode->bits), newnode);
-+		if (!parent)
-+			rcu_assign_pointer(*trie, node);
-+		else
-+			rcu_assign_pointer(CHOOSE_NODE(parent, node->bits),
-+					   node);
-+	}
-+	return 0;
-+}
-+
-+void wg_allowedips_init(struct allowedips *table)
-+{
-+	table->root4 = table->root6 = NULL;
-+	table->seq = 1;
-+}
-+
-+void wg_allowedips_free(struct allowedips *table, struct mutex *lock)
-+{
-+	struct allowedips_node __rcu *old4 = table->root4, *old6 = table->root6;
-+
-+	++table->seq;
-+	RCU_INIT_POINTER(table->root4, NULL);
-+	RCU_INIT_POINTER(table->root6, NULL);
-+	if (rcu_access_pointer(old4)) {
-+		struct allowedips_node *node = rcu_dereference_protected(old4,
-+							lockdep_is_held(lock));
-+
-+		root_remove_peer_lists(node);
-+		call_rcu(&node->rcu, root_free_rcu);
-+	}
-+	if (rcu_access_pointer(old6)) {
-+		struct allowedips_node *node = rcu_dereference_protected(old6,
-+							lockdep_is_held(lock));
-+
-+		root_remove_peer_lists(node);
-+		call_rcu(&node->rcu, root_free_rcu);
-+	}
-+}
-+
-+int wg_allowedips_insert_v4(struct allowedips *table, const struct in_addr *ip,
-+			    u8 cidr, struct wg_peer *peer, struct mutex *lock)
-+{
-+	/* Aligned so it can be passed to fls */
-+	u8 key[4] __aligned(__alignof(u32));
-+
-+	++table->seq;
-+	swap_endian(key, (const u8 *)ip, 32);
-+	return add(&table->root4, 32, key, cidr, peer, lock);
-+}
-+
-+int wg_allowedips_insert_v6(struct allowedips *table, const struct in6_addr *ip,
-+			    u8 cidr, struct wg_peer *peer, struct mutex *lock)
-+{
-+	/* Aligned so it can be passed to fls64 */
-+	u8 key[16] __aligned(__alignof(u64));
-+
-+	++table->seq;
-+	swap_endian(key, (const u8 *)ip, 128);
-+	return add(&table->root6, 128, key, cidr, peer, lock);
-+}
-+
-+void wg_allowedips_remove_by_peer(struct allowedips *table,
-+				  struct wg_peer *peer, struct mutex *lock)
-+{
-+	++table->seq;
-+	walk_remove_by_peer(&table->root4, peer, lock);
-+	walk_remove_by_peer(&table->root6, peer, lock);
-+}
-+
-+int wg_allowedips_read_node(struct allowedips_node *node, u8 ip[16], u8 *cidr)
-+{
-+	const unsigned int cidr_bytes = DIV_ROUND_UP(node->cidr, 8U);
-+	swap_endian(ip, node->bits, node->bitlen);
-+	memset(ip + cidr_bytes, 0, node->bitlen / 8U - cidr_bytes);
-+	if (node->cidr)
-+		ip[cidr_bytes - 1U] &= ~0U << (-node->cidr % 8U);
-+
-+	*cidr = node->cidr;
-+	return node->bitlen == 32 ? AF_INET : AF_INET6;
-+}
-+
-+/* Returns a strong reference to a peer */
-+struct wg_peer *wg_allowedips_lookup_dst(struct allowedips *table,
-+					 struct sk_buff *skb)
-+{
-+	if (skb->protocol == htons(ETH_P_IP))
-+		return lookup(table->root4, 32, &ip_hdr(skb)->daddr);
-+	else if (skb->protocol == htons(ETH_P_IPV6))
-+		return lookup(table->root6, 128, &ipv6_hdr(skb)->daddr);
-+	return NULL;
-+}
-+
-+/* Returns a strong reference to a peer */
-+struct wg_peer *wg_allowedips_lookup_src(struct allowedips *table,
-+					 struct sk_buff *skb)
-+{
-+	if (skb->protocol == htons(ETH_P_IP))
-+		return lookup(table->root4, 32, &ip_hdr(skb)->saddr);
-+	else if (skb->protocol == htons(ETH_P_IPV6))
-+		return lookup(table->root6, 128, &ipv6_hdr(skb)->saddr);
-+	return NULL;
-+}
-+
-+#include "selftest/allowedips.c"
---- /dev/null
-+++ b/drivers/net/wireguard/allowedips.h
-@@ -0,0 +1,59 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifndef _WG_ALLOWEDIPS_H
-+#define _WG_ALLOWEDIPS_H
-+
-+#include <linux/mutex.h>
-+#include <linux/ip.h>
-+#include <linux/ipv6.h>
-+
-+struct wg_peer;
-+
-+struct allowedips_node {
-+	struct wg_peer __rcu *peer;
-+	struct allowedips_node __rcu *bit[2];
-+	/* While it may seem scandalous that we waste space for v4,
-+	 * we're alloc'ing to the nearest power of 2 anyway, so this
-+	 * doesn't actually make a difference.
-+	 */
-+	u8 bits[16] __aligned(__alignof(u64));
-+	u8 cidr, bit_at_a, bit_at_b, bitlen;
-+
-+	/* Keep rarely used list at bottom to be beyond cache line. */
-+	union {
-+		struct list_head peer_list;
-+		struct rcu_head rcu;
-+	};
-+};
-+
-+struct allowedips {
-+	struct allowedips_node __rcu *root4;
-+	struct allowedips_node __rcu *root6;
-+	u64 seq;
-+};
-+
-+void wg_allowedips_init(struct allowedips *table);
-+void wg_allowedips_free(struct allowedips *table, struct mutex *mutex);
-+int wg_allowedips_insert_v4(struct allowedips *table, const struct in_addr *ip,
-+			    u8 cidr, struct wg_peer *peer, struct mutex *lock);
-+int wg_allowedips_insert_v6(struct allowedips *table, const struct in6_addr *ip,
-+			    u8 cidr, struct wg_peer *peer, struct mutex *lock);
-+void wg_allowedips_remove_by_peer(struct allowedips *table,
-+				  struct wg_peer *peer, struct mutex *lock);
-+/* The ip input pointer should be __aligned(__alignof(u64))) */
-+int wg_allowedips_read_node(struct allowedips_node *node, u8 ip[16], u8 *cidr);
-+
-+/* These return a strong reference to a peer: */
-+struct wg_peer *wg_allowedips_lookup_dst(struct allowedips *table,
-+					 struct sk_buff *skb);
-+struct wg_peer *wg_allowedips_lookup_src(struct allowedips *table,
-+					 struct sk_buff *skb);
-+
-+#ifdef DEBUG
-+bool wg_allowedips_selftest(void);
-+#endif
-+
-+#endif /* _WG_ALLOWEDIPS_H */
---- /dev/null
-+++ b/drivers/net/wireguard/cookie.c
-@@ -0,0 +1,236 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include "cookie.h"
-+#include "peer.h"
-+#include "device.h"
-+#include "messages.h"
-+#include "ratelimiter.h"
-+#include "timers.h"
-+
-+#include <crypto/blake2s.h>
-+#include <crypto/chacha20poly1305.h>
-+
-+#include <net/ipv6.h>
-+#include <crypto/algapi.h>
-+
-+void wg_cookie_checker_init(struct cookie_checker *checker,
-+			    struct wg_device *wg)
-+{
-+	init_rwsem(&checker->secret_lock);
-+	checker->secret_birthdate = ktime_get_coarse_boottime_ns();
-+	get_random_bytes(checker->secret, NOISE_HASH_LEN);
-+	checker->device = wg;
-+}
-+
-+enum { COOKIE_KEY_LABEL_LEN = 8 };
-+static const u8 mac1_key_label[COOKIE_KEY_LABEL_LEN] = "mac1----";
-+static const u8 cookie_key_label[COOKIE_KEY_LABEL_LEN] = "cookie--";
-+
-+static void precompute_key(u8 key[NOISE_SYMMETRIC_KEY_LEN],
-+			   const u8 pubkey[NOISE_PUBLIC_KEY_LEN],
-+			   const u8 label[COOKIE_KEY_LABEL_LEN])
-+{
-+	struct blake2s_state blake;
-+
-+	blake2s_init(&blake, NOISE_SYMMETRIC_KEY_LEN);
-+	blake2s_update(&blake, label, COOKIE_KEY_LABEL_LEN);
-+	blake2s_update(&blake, pubkey, NOISE_PUBLIC_KEY_LEN);
-+	blake2s_final(&blake, key);
-+}
-+
-+/* Must hold peer->handshake.static_identity->lock */
-+void wg_cookie_checker_precompute_device_keys(struct cookie_checker *checker)
-+{
-+	if (likely(checker->device->static_identity.has_identity)) {
-+		precompute_key(checker->cookie_encryption_key,
-+			       checker->device->static_identity.static_public,
-+			       cookie_key_label);
-+		precompute_key(checker->message_mac1_key,
-+			       checker->device->static_identity.static_public,
-+			       mac1_key_label);
-+	} else {
-+		memset(checker->cookie_encryption_key, 0,
-+		       NOISE_SYMMETRIC_KEY_LEN);
-+		memset(checker->message_mac1_key, 0, NOISE_SYMMETRIC_KEY_LEN);
-+	}
-+}
-+
-+void wg_cookie_checker_precompute_peer_keys(struct wg_peer *peer)
-+{
-+	precompute_key(peer->latest_cookie.cookie_decryption_key,
-+		       peer->handshake.remote_static, cookie_key_label);
-+	precompute_key(peer->latest_cookie.message_mac1_key,
-+		       peer->handshake.remote_static, mac1_key_label);
-+}
-+
-+void wg_cookie_init(struct cookie *cookie)
-+{
-+	memset(cookie, 0, sizeof(*cookie));
-+	init_rwsem(&cookie->lock);
-+}
-+
-+static void compute_mac1(u8 mac1[COOKIE_LEN], const void *message, size_t len,
-+			 const u8 key[NOISE_SYMMETRIC_KEY_LEN])
-+{
-+	len = len - sizeof(struct message_macs) +
-+	      offsetof(struct message_macs, mac1);
-+	blake2s(mac1, message, key, COOKIE_LEN, len, NOISE_SYMMETRIC_KEY_LEN);
-+}
-+
-+static void compute_mac2(u8 mac2[COOKIE_LEN], const void *message, size_t len,
-+			 const u8 cookie[COOKIE_LEN])
-+{
-+	len = len - sizeof(struct message_macs) +
-+	      offsetof(struct message_macs, mac2);
-+	blake2s(mac2, message, cookie, COOKIE_LEN, len, COOKIE_LEN);
-+}
-+
-+static void make_cookie(u8 cookie[COOKIE_LEN], struct sk_buff *skb,
-+			struct cookie_checker *checker)
-+{
-+	struct blake2s_state state;
-+
-+	if (wg_birthdate_has_expired(checker->secret_birthdate,
-+				     COOKIE_SECRET_MAX_AGE)) {
-+		down_write(&checker->secret_lock);
-+		checker->secret_birthdate = ktime_get_coarse_boottime_ns();
-+		get_random_bytes(checker->secret, NOISE_HASH_LEN);
-+		up_write(&checker->secret_lock);
-+	}
-+
-+	down_read(&checker->secret_lock);
-+
-+	blake2s_init_key(&state, COOKIE_LEN, checker->secret, NOISE_HASH_LEN);
-+	if (skb->protocol == htons(ETH_P_IP))
-+		blake2s_update(&state, (u8 *)&ip_hdr(skb)->saddr,
-+			       sizeof(struct in_addr));
-+	else if (skb->protocol == htons(ETH_P_IPV6))
-+		blake2s_update(&state, (u8 *)&ipv6_hdr(skb)->saddr,
-+			       sizeof(struct in6_addr));
-+	blake2s_update(&state, (u8 *)&udp_hdr(skb)->source, sizeof(__be16));
-+	blake2s_final(&state, cookie);
-+
-+	up_read(&checker->secret_lock);
-+}
-+
-+enum cookie_mac_state wg_cookie_validate_packet(struct cookie_checker *checker,
-+						struct sk_buff *skb,
-+						bool check_cookie)
-+{
-+	struct message_macs *macs = (struct message_macs *)
-+		(skb->data + skb->len - sizeof(*macs));
-+	enum cookie_mac_state ret;
-+	u8 computed_mac[COOKIE_LEN];
-+	u8 cookie[COOKIE_LEN];
-+
-+	ret = INVALID_MAC;
-+	compute_mac1(computed_mac, skb->data, skb->len,
-+		     checker->message_mac1_key);
-+	if (crypto_memneq(computed_mac, macs->mac1, COOKIE_LEN))
-+		goto out;
-+
-+	ret = VALID_MAC_BUT_NO_COOKIE;
-+
-+	if (!check_cookie)
-+		goto out;
-+
-+	make_cookie(cookie, skb, checker);
-+
-+	compute_mac2(computed_mac, skb->data, skb->len, cookie);
-+	if (crypto_memneq(computed_mac, macs->mac2, COOKIE_LEN))
-+		goto out;
-+
-+	ret = VALID_MAC_WITH_COOKIE_BUT_RATELIMITED;
-+	if (!wg_ratelimiter_allow(skb, dev_net(checker->device->dev)))
-+		goto out;
-+
-+	ret = VALID_MAC_WITH_COOKIE;
-+
-+out:
-+	return ret;
-+}
-+
-+void wg_cookie_add_mac_to_packet(void *message, size_t len,
-+				 struct wg_peer *peer)
-+{
-+	struct message_macs *macs = (struct message_macs *)
-+		((u8 *)message + len - sizeof(*macs));
-+
-+	down_write(&peer->latest_cookie.lock);
-+	compute_mac1(macs->mac1, message, len,
-+		     peer->latest_cookie.message_mac1_key);
-+	memcpy(peer->latest_cookie.last_mac1_sent, macs->mac1, COOKIE_LEN);
-+	peer->latest_cookie.have_sent_mac1 = true;
-+	up_write(&peer->latest_cookie.lock);
-+
-+	down_read(&peer->latest_cookie.lock);
-+	if (peer->latest_cookie.is_valid &&
-+	    !wg_birthdate_has_expired(peer->latest_cookie.birthdate,
-+				COOKIE_SECRET_MAX_AGE - COOKIE_SECRET_LATENCY))
-+		compute_mac2(macs->mac2, message, len,
-+			     peer->latest_cookie.cookie);
-+	else
-+		memset(macs->mac2, 0, COOKIE_LEN);
-+	up_read(&peer->latest_cookie.lock);
-+}
-+
-+void wg_cookie_message_create(struct message_handshake_cookie *dst,
-+			      struct sk_buff *skb, __le32 index,
-+			      struct cookie_checker *checker)
-+{
-+	struct message_macs *macs = (struct message_macs *)
-+		((u8 *)skb->data + skb->len - sizeof(*macs));
-+	u8 cookie[COOKIE_LEN];
-+
-+	dst->header.type = cpu_to_le32(MESSAGE_HANDSHAKE_COOKIE);
-+	dst->receiver_index = index;
-+	get_random_bytes_wait(dst->nonce, COOKIE_NONCE_LEN);
-+
-+	make_cookie(cookie, skb, checker);
-+	xchacha20poly1305_encrypt(dst->encrypted_cookie, cookie, COOKIE_LEN,
-+				  macs->mac1, COOKIE_LEN, dst->nonce,
-+				  checker->cookie_encryption_key);
-+}
-+
-+void wg_cookie_message_consume(struct message_handshake_cookie *src,
-+			       struct wg_device *wg)
-+{
-+	struct wg_peer *peer = NULL;
-+	u8 cookie[COOKIE_LEN];
-+	bool ret;
-+
-+	if (unlikely(!wg_index_hashtable_lookup(wg->index_hashtable,
-+						INDEX_HASHTABLE_HANDSHAKE |
-+						INDEX_HASHTABLE_KEYPAIR,
-+						src->receiver_index, &peer)))
-+		return;
-+
-+	down_read(&peer->latest_cookie.lock);
-+	if (unlikely(!peer->latest_cookie.have_sent_mac1)) {
-+		up_read(&peer->latest_cookie.lock);
-+		goto out;
-+	}
-+	ret = xchacha20poly1305_decrypt(
-+		cookie, src->encrypted_cookie, sizeof(src->encrypted_cookie),
-+		peer->latest_cookie.last_mac1_sent, COOKIE_LEN, src->nonce,
-+		peer->latest_cookie.cookie_decryption_key);
-+	up_read(&peer->latest_cookie.lock);
-+
-+	if (ret) {
-+		down_write(&peer->latest_cookie.lock);
-+		memcpy(peer->latest_cookie.cookie, cookie, COOKIE_LEN);
-+		peer->latest_cookie.birthdate = ktime_get_coarse_boottime_ns();
-+		peer->latest_cookie.is_valid = true;
-+		peer->latest_cookie.have_sent_mac1 = false;
-+		up_write(&peer->latest_cookie.lock);
-+	} else {
-+		net_dbg_ratelimited("%s: Could not decrypt invalid cookie response\n",
-+				    wg->dev->name);
-+	}
-+
-+out:
-+	wg_peer_put(peer);
-+}
---- /dev/null
-+++ b/drivers/net/wireguard/cookie.h
-@@ -0,0 +1,59 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifndef _WG_COOKIE_H
-+#define _WG_COOKIE_H
-+
-+#include "messages.h"
-+#include <linux/rwsem.h>
-+
-+struct wg_peer;
-+
-+struct cookie_checker {
-+	u8 secret[NOISE_HASH_LEN];
-+	u8 cookie_encryption_key[NOISE_SYMMETRIC_KEY_LEN];
-+	u8 message_mac1_key[NOISE_SYMMETRIC_KEY_LEN];
-+	u64 secret_birthdate;
-+	struct rw_semaphore secret_lock;
-+	struct wg_device *device;
-+};
-+
-+struct cookie {
-+	u64 birthdate;
-+	bool is_valid;
-+	u8 cookie[COOKIE_LEN];
-+	bool have_sent_mac1;
-+	u8 last_mac1_sent[COOKIE_LEN];
-+	u8 cookie_decryption_key[NOISE_SYMMETRIC_KEY_LEN];
-+	u8 message_mac1_key[NOISE_SYMMETRIC_KEY_LEN];
-+	struct rw_semaphore lock;
-+};
-+
-+enum cookie_mac_state {
-+	INVALID_MAC,
-+	VALID_MAC_BUT_NO_COOKIE,
-+	VALID_MAC_WITH_COOKIE_BUT_RATELIMITED,
-+	VALID_MAC_WITH_COOKIE
-+};
-+
-+void wg_cookie_checker_init(struct cookie_checker *checker,
-+			    struct wg_device *wg);
-+void wg_cookie_checker_precompute_device_keys(struct cookie_checker *checker);
-+void wg_cookie_checker_precompute_peer_keys(struct wg_peer *peer);
-+void wg_cookie_init(struct cookie *cookie);
-+
-+enum cookie_mac_state wg_cookie_validate_packet(struct cookie_checker *checker,
-+						struct sk_buff *skb,
-+						bool check_cookie);
-+void wg_cookie_add_mac_to_packet(void *message, size_t len,
-+				 struct wg_peer *peer);
-+
-+void wg_cookie_message_create(struct message_handshake_cookie *src,
-+			      struct sk_buff *skb, __le32 index,
-+			      struct cookie_checker *checker);
-+void wg_cookie_message_consume(struct message_handshake_cookie *src,
-+			       struct wg_device *wg);
-+
-+#endif /* _WG_COOKIE_H */
---- /dev/null
-+++ b/drivers/net/wireguard/device.c
-@@ -0,0 +1,458 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include "queueing.h"
-+#include "socket.h"
-+#include "timers.h"
-+#include "device.h"
-+#include "ratelimiter.h"
-+#include "peer.h"
-+#include "messages.h"
-+
-+#include <linux/module.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/inet.h>
-+#include <linux/netdevice.h>
-+#include <linux/inetdevice.h>
-+#include <linux/if_arp.h>
-+#include <linux/icmp.h>
-+#include <linux/suspend.h>
-+#include <net/icmp.h>
-+#include <net/rtnetlink.h>
-+#include <net/ip_tunnels.h>
-+#include <net/addrconf.h>
-+
-+static LIST_HEAD(device_list);
-+
-+static int wg_open(struct net_device *dev)
-+{
-+	struct in_device *dev_v4 = __in_dev_get_rtnl(dev);
-+	struct inet6_dev *dev_v6 = __in6_dev_get(dev);
-+	struct wg_device *wg = netdev_priv(dev);
-+	struct wg_peer *peer;
-+	int ret;
-+
-+	if (dev_v4) {
-+		/* At some point we might put this check near the ip_rt_send_
-+		 * redirect call of ip_forward in net/ipv4/ip_forward.c, similar
-+		 * to the current secpath check.
-+		 */
-+		IN_DEV_CONF_SET(dev_v4, SEND_REDIRECTS, false);
-+		IPV4_DEVCONF_ALL(dev_net(dev), SEND_REDIRECTS) = false;
-+	}
-+	if (dev_v6)
-+		dev_v6->cnf.addr_gen_mode = IN6_ADDR_GEN_MODE_NONE;
-+
-+	ret = wg_socket_init(wg, wg->incoming_port);
-+	if (ret < 0)
-+		return ret;
-+	mutex_lock(&wg->device_update_lock);
-+	list_for_each_entry(peer, &wg->peer_list, peer_list) {
-+		wg_packet_send_staged_packets(peer);
-+		if (peer->persistent_keepalive_interval)
-+			wg_packet_send_keepalive(peer);
-+	}
-+	mutex_unlock(&wg->device_update_lock);
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM_SLEEP
-+static int wg_pm_notification(struct notifier_block *nb, unsigned long action,
-+			      void *data)
-+{
-+	struct wg_device *wg;
-+	struct wg_peer *peer;
-+
-+	/* If the machine is constantly suspending and resuming, as part of
-+	 * its normal operation rather than as a somewhat rare event, then we
-+	 * don't actually want to clear keys.
-+	 */
-+	if (IS_ENABLED(CONFIG_PM_AUTOSLEEP) || IS_ENABLED(CONFIG_ANDROID))
-+		return 0;
-+
-+	if (action != PM_HIBERNATION_PREPARE && action != PM_SUSPEND_PREPARE)
-+		return 0;
-+
-+	rtnl_lock();
-+	list_for_each_entry(wg, &device_list, device_list) {
-+		mutex_lock(&wg->device_update_lock);
-+		list_for_each_entry(peer, &wg->peer_list, peer_list) {
-+			del_timer(&peer->timer_zero_key_material);
-+			wg_noise_handshake_clear(&peer->handshake);
-+			wg_noise_keypairs_clear(&peer->keypairs);
-+		}
-+		mutex_unlock(&wg->device_update_lock);
-+	}
-+	rtnl_unlock();
-+	rcu_barrier();
-+	return 0;
-+}
-+
-+static struct notifier_block pm_notifier = { .notifier_call = wg_pm_notification };
-+#endif
-+
-+static int wg_stop(struct net_device *dev)
-+{
-+	struct wg_device *wg = netdev_priv(dev);
-+	struct wg_peer *peer;
-+
-+	mutex_lock(&wg->device_update_lock);
-+	list_for_each_entry(peer, &wg->peer_list, peer_list) {
-+		wg_packet_purge_staged_packets(peer);
-+		wg_timers_stop(peer);
-+		wg_noise_handshake_clear(&peer->handshake);
-+		wg_noise_keypairs_clear(&peer->keypairs);
-+		wg_noise_reset_last_sent_handshake(&peer->last_sent_handshake);
-+	}
-+	mutex_unlock(&wg->device_update_lock);
-+	skb_queue_purge(&wg->incoming_handshakes);
-+	wg_socket_reinit(wg, NULL, NULL);
-+	return 0;
-+}
-+
-+static netdev_tx_t wg_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+	struct wg_device *wg = netdev_priv(dev);
-+	struct sk_buff_head packets;
-+	struct wg_peer *peer;
-+	struct sk_buff *next;
-+	sa_family_t family;
-+	u32 mtu;
-+	int ret;
-+
-+	if (unlikely(wg_skb_examine_untrusted_ip_hdr(skb) != skb->protocol)) {
-+		ret = -EPROTONOSUPPORT;
-+		net_dbg_ratelimited("%s: Invalid IP packet\n", dev->name);
-+		goto err;
-+	}
-+
-+	peer = wg_allowedips_lookup_dst(&wg->peer_allowedips, skb);
-+	if (unlikely(!peer)) {
-+		ret = -ENOKEY;
-+		if (skb->protocol == htons(ETH_P_IP))
-+			net_dbg_ratelimited("%s: No peer has allowed IPs matching %pI4\n",
-+					    dev->name, &ip_hdr(skb)->daddr);
-+		else if (skb->protocol == htons(ETH_P_IPV6))
-+			net_dbg_ratelimited("%s: No peer has allowed IPs matching %pI6\n",
-+					    dev->name, &ipv6_hdr(skb)->daddr);
-+		goto err;
-+	}
-+
-+	family = READ_ONCE(peer->endpoint.addr.sa_family);
-+	if (unlikely(family != AF_INET && family != AF_INET6)) {
-+		ret = -EDESTADDRREQ;
-+		net_dbg_ratelimited("%s: No valid endpoint has been configured or discovered for peer %llu\n",
-+				    dev->name, peer->internal_id);
-+		goto err_peer;
-+	}
-+
-+	mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
-+
-+	__skb_queue_head_init(&packets);
-+	if (!skb_is_gso(skb)) {
-+		skb_mark_not_on_list(skb);
-+	} else {
-+		struct sk_buff *segs = skb_gso_segment(skb, 0);
-+
-+		if (unlikely(IS_ERR(segs))) {
-+			ret = PTR_ERR(segs);
-+			goto err_peer;
-+		}
-+		dev_kfree_skb(skb);
-+		skb = segs;
-+	}
-+
-+	skb_list_walk_safe(skb, skb, next) {
-+		skb_mark_not_on_list(skb);
-+
-+		skb = skb_share_check(skb, GFP_ATOMIC);
-+		if (unlikely(!skb))
-+			continue;
-+
-+		/* We only need to keep the original dst around for icmp,
-+		 * so at this point we're in a position to drop it.
-+		 */
-+		skb_dst_drop(skb);
-+
-+		PACKET_CB(skb)->mtu = mtu;
-+
-+		__skb_queue_tail(&packets, skb);
-+	}
-+
-+	spin_lock_bh(&peer->staged_packet_queue.lock);
-+	/* If the queue is getting too big, we start removing the oldest packets
-+	 * until it's small again. We do this before adding the new packet, so
-+	 * we don't remove GSO segments that are in excess.
-+	 */
-+	while (skb_queue_len(&peer->staged_packet_queue) > MAX_STAGED_PACKETS) {
-+		dev_kfree_skb(__skb_dequeue(&peer->staged_packet_queue));
-+		++dev->stats.tx_dropped;
-+	}
-+	skb_queue_splice_tail(&packets, &peer->staged_packet_queue);
-+	spin_unlock_bh(&peer->staged_packet_queue.lock);
-+
-+	wg_packet_send_staged_packets(peer);
-+
-+	wg_peer_put(peer);
-+	return NETDEV_TX_OK;
-+
-+err_peer:
-+	wg_peer_put(peer);
-+err:
-+	++dev->stats.tx_errors;
-+	if (skb->protocol == htons(ETH_P_IP))
-+		icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0);
-+	else if (skb->protocol == htons(ETH_P_IPV6))
-+		icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0);
-+	kfree_skb(skb);
-+	return ret;
-+}
-+
-+static const struct net_device_ops netdev_ops = {
-+	.ndo_open		= wg_open,
-+	.ndo_stop		= wg_stop,
-+	.ndo_start_xmit		= wg_xmit,
-+	.ndo_get_stats64	= ip_tunnel_get_stats64
-+};
-+
-+static void wg_destruct(struct net_device *dev)
-+{
-+	struct wg_device *wg = netdev_priv(dev);
-+
-+	rtnl_lock();
-+	list_del(&wg->device_list);
-+	rtnl_unlock();
-+	mutex_lock(&wg->device_update_lock);
-+	wg->incoming_port = 0;
-+	wg_socket_reinit(wg, NULL, NULL);
-+	/* The final references are cleared in the below calls to destroy_workqueue. */
-+	wg_peer_remove_all(wg);
-+	destroy_workqueue(wg->handshake_receive_wq);
-+	destroy_workqueue(wg->handshake_send_wq);
-+	destroy_workqueue(wg->packet_crypt_wq);
-+	wg_packet_queue_free(&wg->decrypt_queue, true);
-+	wg_packet_queue_free(&wg->encrypt_queue, true);
-+	rcu_barrier(); /* Wait for all the peers to be actually freed. */
-+	wg_ratelimiter_uninit();
-+	memzero_explicit(&wg->static_identity, sizeof(wg->static_identity));
-+	skb_queue_purge(&wg->incoming_handshakes);
-+	free_percpu(dev->tstats);
-+	free_percpu(wg->incoming_handshakes_worker);
-+	if (wg->have_creating_net_ref)
-+		put_net(wg->creating_net);
-+	kvfree(wg->index_hashtable);
-+	kvfree(wg->peer_hashtable);
-+	mutex_unlock(&wg->device_update_lock);
-+
-+	pr_debug("%s: Interface deleted\n", dev->name);
-+	free_netdev(dev);
-+}
-+
-+static const struct device_type device_type = { .name = KBUILD_MODNAME };
-+
-+static void wg_setup(struct net_device *dev)
-+{
-+	struct wg_device *wg = netdev_priv(dev);
-+	enum { WG_NETDEV_FEATURES = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
-+				    NETIF_F_SG | NETIF_F_GSO |
-+				    NETIF_F_GSO_SOFTWARE | NETIF_F_HIGHDMA };
-+
-+	dev->netdev_ops = &netdev_ops;
-+	dev->hard_header_len = 0;
-+	dev->addr_len = 0;
-+	dev->needed_headroom = DATA_PACKET_HEAD_ROOM;
-+	dev->needed_tailroom = noise_encrypted_len(MESSAGE_PADDING_MULTIPLE);
-+	dev->type = ARPHRD_NONE;
-+	dev->flags = IFF_POINTOPOINT | IFF_NOARP;
-+	dev->priv_flags |= IFF_NO_QUEUE;
-+	dev->features |= NETIF_F_LLTX;
-+	dev->features |= WG_NETDEV_FEATURES;
-+	dev->hw_features |= WG_NETDEV_FEATURES;
-+	dev->hw_enc_features |= WG_NETDEV_FEATURES;
-+	dev->mtu = ETH_DATA_LEN - MESSAGE_MINIMUM_LENGTH -
-+		   sizeof(struct udphdr) -
-+		   max(sizeof(struct ipv6hdr), sizeof(struct iphdr));
-+
-+	SET_NETDEV_DEVTYPE(dev, &device_type);
-+
-+	/* We need to keep the dst around in case of icmp replies. */
-+	netif_keep_dst(dev);
-+
-+	memset(wg, 0, sizeof(*wg));
-+	wg->dev = dev;
-+}
-+
-+static int wg_newlink(struct net *src_net, struct net_device *dev,
-+		      struct nlattr *tb[], struct nlattr *data[],
-+		      struct netlink_ext_ack *extack)
-+{
-+	struct wg_device *wg = netdev_priv(dev);
-+	int ret = -ENOMEM;
-+
-+	wg->creating_net = src_net;
-+	init_rwsem(&wg->static_identity.lock);
-+	mutex_init(&wg->socket_update_lock);
-+	mutex_init(&wg->device_update_lock);
-+	skb_queue_head_init(&wg->incoming_handshakes);
-+	wg_allowedips_init(&wg->peer_allowedips);
-+	wg_cookie_checker_init(&wg->cookie_checker, wg);
-+	INIT_LIST_HEAD(&wg->peer_list);
-+	wg->device_update_gen = 1;
-+
-+	wg->peer_hashtable = wg_pubkey_hashtable_alloc();
-+	if (!wg->peer_hashtable)
-+		return ret;
-+
-+	wg->index_hashtable = wg_index_hashtable_alloc();
-+	if (!wg->index_hashtable)
-+		goto err_free_peer_hashtable;
-+
-+	dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
-+	if (!dev->tstats)
-+		goto err_free_index_hashtable;
-+
-+	wg->incoming_handshakes_worker =
-+		wg_packet_percpu_multicore_worker_alloc(
-+				wg_packet_handshake_receive_worker, wg);
-+	if (!wg->incoming_handshakes_worker)
-+		goto err_free_tstats;
-+
-+	wg->handshake_receive_wq = alloc_workqueue("wg-kex-%s",
-+			WQ_CPU_INTENSIVE | WQ_FREEZABLE, 0, dev->name);
-+	if (!wg->handshake_receive_wq)
-+		goto err_free_incoming_handshakes;
-+
-+	wg->handshake_send_wq = alloc_workqueue("wg-kex-%s",
-+			WQ_UNBOUND | WQ_FREEZABLE, 0, dev->name);
-+	if (!wg->handshake_send_wq)
-+		goto err_destroy_handshake_receive;
-+
-+	wg->packet_crypt_wq = alloc_workqueue("wg-crypt-%s",
-+			WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM, 0, dev->name);
-+	if (!wg->packet_crypt_wq)
-+		goto err_destroy_handshake_send;
-+
-+	ret = wg_packet_queue_init(&wg->encrypt_queue, wg_packet_encrypt_worker,
-+				   true, MAX_QUEUED_PACKETS);
-+	if (ret < 0)
-+		goto err_destroy_packet_crypt;
-+
-+	ret = wg_packet_queue_init(&wg->decrypt_queue, wg_packet_decrypt_worker,
-+				   true, MAX_QUEUED_PACKETS);
-+	if (ret < 0)
-+		goto err_free_encrypt_queue;
-+
-+	ret = wg_ratelimiter_init();
-+	if (ret < 0)
-+		goto err_free_decrypt_queue;
-+
-+	ret = register_netdevice(dev);
-+	if (ret < 0)
-+		goto err_uninit_ratelimiter;
-+
-+	list_add(&wg->device_list, &device_list);
-+
-+	/* We wait until the end to assign priv_destructor, so that
-+	 * register_netdevice doesn't call it for us if it fails.
-+	 */
-+	dev->priv_destructor = wg_destruct;
-+
-+	pr_debug("%s: Interface created\n", dev->name);
-+	return ret;
-+
-+err_uninit_ratelimiter:
-+	wg_ratelimiter_uninit();
-+err_free_decrypt_queue:
-+	wg_packet_queue_free(&wg->decrypt_queue, true);
-+err_free_encrypt_queue:
-+	wg_packet_queue_free(&wg->encrypt_queue, true);
-+err_destroy_packet_crypt:
-+	destroy_workqueue(wg->packet_crypt_wq);
-+err_destroy_handshake_send:
-+	destroy_workqueue(wg->handshake_send_wq);
-+err_destroy_handshake_receive:
-+	destroy_workqueue(wg->handshake_receive_wq);
-+err_free_incoming_handshakes:
-+	free_percpu(wg->incoming_handshakes_worker);
-+err_free_tstats:
-+	free_percpu(dev->tstats);
-+err_free_index_hashtable:
-+	kvfree(wg->index_hashtable);
-+err_free_peer_hashtable:
-+	kvfree(wg->peer_hashtable);
-+	return ret;
-+}
-+
-+static struct rtnl_link_ops link_ops __read_mostly = {
-+	.kind			= KBUILD_MODNAME,
-+	.priv_size		= sizeof(struct wg_device),
-+	.setup			= wg_setup,
-+	.newlink		= wg_newlink,
-+};
-+
-+static int wg_netdevice_notification(struct notifier_block *nb,
-+				     unsigned long action, void *data)
-+{
-+	struct net_device *dev = ((struct netdev_notifier_info *)data)->dev;
-+	struct wg_device *wg = netdev_priv(dev);
-+
-+	ASSERT_RTNL();
-+
-+	if (action != NETDEV_REGISTER || dev->netdev_ops != &netdev_ops)
-+		return 0;
-+
-+	if (dev_net(dev) == wg->creating_net && wg->have_creating_net_ref) {
-+		put_net(wg->creating_net);
-+		wg->have_creating_net_ref = false;
-+	} else if (dev_net(dev) != wg->creating_net &&
-+		   !wg->have_creating_net_ref) {
-+		wg->have_creating_net_ref = true;
-+		get_net(wg->creating_net);
-+	}
-+	return 0;
-+}
-+
-+static struct notifier_block netdevice_notifier = {
-+	.notifier_call = wg_netdevice_notification
-+};
-+
-+int __init wg_device_init(void)
-+{
-+	int ret;
-+
-+#ifdef CONFIG_PM_SLEEP
-+	ret = register_pm_notifier(&pm_notifier);
-+	if (ret)
-+		return ret;
-+#endif
-+
-+	ret = register_netdevice_notifier(&netdevice_notifier);
-+	if (ret)
-+		goto error_pm;
-+
-+	ret = rtnl_link_register(&link_ops);
-+	if (ret)
-+		goto error_netdevice;
-+
-+	return 0;
-+
-+error_netdevice:
-+	unregister_netdevice_notifier(&netdevice_notifier);
-+error_pm:
-+#ifdef CONFIG_PM_SLEEP
-+	unregister_pm_notifier(&pm_notifier);
-+#endif
-+	return ret;
-+}
-+
-+void wg_device_uninit(void)
-+{
-+	rtnl_link_unregister(&link_ops);
-+	unregister_netdevice_notifier(&netdevice_notifier);
-+#ifdef CONFIG_PM_SLEEP
-+	unregister_pm_notifier(&pm_notifier);
-+#endif
-+	rcu_barrier();
-+}
---- /dev/null
-+++ b/drivers/net/wireguard/device.h
-@@ -0,0 +1,65 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifndef _WG_DEVICE_H
-+#define _WG_DEVICE_H
-+
-+#include "noise.h"
-+#include "allowedips.h"
-+#include "peerlookup.h"
-+#include "cookie.h"
-+
-+#include <linux/types.h>
-+#include <linux/netdevice.h>
-+#include <linux/workqueue.h>
-+#include <linux/mutex.h>
-+#include <linux/net.h>
-+#include <linux/ptr_ring.h>
-+
-+struct wg_device;
-+
-+struct multicore_worker {
-+	void *ptr;
-+	struct work_struct work;
-+};
-+
-+struct crypt_queue {
-+	struct ptr_ring ring;
-+	union {
-+		struct {
-+			struct multicore_worker __percpu *worker;
-+			int last_cpu;
-+		};
-+		struct work_struct work;
-+	};
-+};
-+
-+struct wg_device {
-+	struct net_device *dev;
-+	struct crypt_queue encrypt_queue, decrypt_queue;
-+	struct sock __rcu *sock4, *sock6;
-+	struct net *creating_net;
-+	struct noise_static_identity static_identity;
-+	struct workqueue_struct *handshake_receive_wq, *handshake_send_wq;
-+	struct workqueue_struct *packet_crypt_wq;
-+	struct sk_buff_head incoming_handshakes;
-+	int incoming_handshake_cpu;
-+	struct multicore_worker __percpu *incoming_handshakes_worker;
-+	struct cookie_checker cookie_checker;
-+	struct pubkey_hashtable *peer_hashtable;
-+	struct index_hashtable *index_hashtable;
-+	struct allowedips peer_allowedips;
-+	struct mutex device_update_lock, socket_update_lock;
-+	struct list_head device_list, peer_list;
-+	unsigned int num_peers, device_update_gen;
-+	u32 fwmark;
-+	u16 incoming_port;
-+	bool have_creating_net_ref;
-+};
-+
-+int wg_device_init(void);
-+void wg_device_uninit(void);
-+
-+#endif /* _WG_DEVICE_H */
---- /dev/null
-+++ b/drivers/net/wireguard/main.c
-@@ -0,0 +1,64 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include "version.h"
-+#include "device.h"
-+#include "noise.h"
-+#include "queueing.h"
-+#include "ratelimiter.h"
-+#include "netlink.h"
-+
-+#include <uapi/linux/wireguard.h>
-+
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/genetlink.h>
-+#include <net/rtnetlink.h>
-+
-+static int __init mod_init(void)
-+{
-+	int ret;
-+
-+#ifdef DEBUG
-+	if (!wg_allowedips_selftest() || !wg_packet_counter_selftest() ||
-+	    !wg_ratelimiter_selftest())
-+		return -ENOTRECOVERABLE;
-+#endif
-+	wg_noise_init();
-+
-+	ret = wg_device_init();
-+	if (ret < 0)
-+		goto err_device;
-+
-+	ret = wg_genetlink_init();
-+	if (ret < 0)
-+		goto err_netlink;
-+
-+	pr_info("WireGuard " WIREGUARD_VERSION " loaded. See www.wireguard.com for information.\n");
-+	pr_info("Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.\n");
-+
-+	return 0;
-+
-+err_netlink:
-+	wg_device_uninit();
-+err_device:
-+	return ret;
-+}
-+
-+static void __exit mod_exit(void)
-+{
-+	wg_genetlink_uninit();
-+	wg_device_uninit();
-+}
-+
-+module_init(mod_init);
-+module_exit(mod_exit);
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("WireGuard secure network tunnel");
-+MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
-+MODULE_VERSION(WIREGUARD_VERSION);
-+MODULE_ALIAS_RTNL_LINK(KBUILD_MODNAME);
-+MODULE_ALIAS_GENL_FAMILY(WG_GENL_NAME);
---- /dev/null
-+++ b/drivers/net/wireguard/messages.h
-@@ -0,0 +1,128 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifndef _WG_MESSAGES_H
-+#define _WG_MESSAGES_H
-+
-+#include <crypto/curve25519.h>
-+#include <crypto/chacha20poly1305.h>
-+#include <crypto/blake2s.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/param.h>
-+#include <linux/skbuff.h>
-+
-+enum noise_lengths {
-+	NOISE_PUBLIC_KEY_LEN = CURVE25519_KEY_SIZE,
-+	NOISE_SYMMETRIC_KEY_LEN = CHACHA20POLY1305_KEY_SIZE,
-+	NOISE_TIMESTAMP_LEN = sizeof(u64) + sizeof(u32),
-+	NOISE_AUTHTAG_LEN = CHACHA20POLY1305_AUTHTAG_SIZE,
-+	NOISE_HASH_LEN = BLAKE2S_HASH_SIZE
-+};
-+
-+#define noise_encrypted_len(plain_len) ((plain_len) + NOISE_AUTHTAG_LEN)
-+
-+enum cookie_values {
-+	COOKIE_SECRET_MAX_AGE = 2 * 60,
-+	COOKIE_SECRET_LATENCY = 5,
-+	COOKIE_NONCE_LEN = XCHACHA20POLY1305_NONCE_SIZE,
-+	COOKIE_LEN = 16
-+};
-+
-+enum counter_values {
-+	COUNTER_BITS_TOTAL = 2048,
-+	COUNTER_REDUNDANT_BITS = BITS_PER_LONG,
-+	COUNTER_WINDOW_SIZE = COUNTER_BITS_TOTAL - COUNTER_REDUNDANT_BITS
-+};
-+
-+enum limits {
-+	REKEY_AFTER_MESSAGES = 1ULL << 60,
-+	REJECT_AFTER_MESSAGES = U64_MAX - COUNTER_WINDOW_SIZE - 1,
-+	REKEY_TIMEOUT = 5,
-+	REKEY_TIMEOUT_JITTER_MAX_JIFFIES = HZ / 3,
-+	REKEY_AFTER_TIME = 120,
-+	REJECT_AFTER_TIME = 180,
-+	INITIATIONS_PER_SECOND = 50,
-+	MAX_PEERS_PER_DEVICE = 1U << 20,
-+	KEEPALIVE_TIMEOUT = 10,
-+	MAX_TIMER_HANDSHAKES = 90 / REKEY_TIMEOUT,
-+	MAX_QUEUED_INCOMING_HANDSHAKES = 4096, /* TODO: replace this with DQL */
-+	MAX_STAGED_PACKETS = 128,
-+	MAX_QUEUED_PACKETS = 1024 /* TODO: replace this with DQL */
-+};
-+
-+enum message_type {
-+	MESSAGE_INVALID = 0,
-+	MESSAGE_HANDSHAKE_INITIATION = 1,
-+	MESSAGE_HANDSHAKE_RESPONSE = 2,
-+	MESSAGE_HANDSHAKE_COOKIE = 3,
-+	MESSAGE_DATA = 4
-+};
-+
-+struct message_header {
-+	/* The actual layout of this that we want is:
-+	 * u8 type
-+	 * u8 reserved_zero[3]
-+	 *
-+	 * But it turns out that by encoding this as little endian,
-+	 * we achieve the same thing, and it makes checking faster.
-+	 */
-+	__le32 type;
-+};
-+
-+struct message_macs {
-+	u8 mac1[COOKIE_LEN];
-+	u8 mac2[COOKIE_LEN];
-+};
-+
-+struct message_handshake_initiation {
-+	struct message_header header;
-+	__le32 sender_index;
-+	u8 unencrypted_ephemeral[NOISE_PUBLIC_KEY_LEN];
-+	u8 encrypted_static[noise_encrypted_len(NOISE_PUBLIC_KEY_LEN)];
-+	u8 encrypted_timestamp[noise_encrypted_len(NOISE_TIMESTAMP_LEN)];
-+	struct message_macs macs;
-+};
-+
-+struct message_handshake_response {
-+	struct message_header header;
-+	__le32 sender_index;
-+	__le32 receiver_index;
-+	u8 unencrypted_ephemeral[NOISE_PUBLIC_KEY_LEN];
-+	u8 encrypted_nothing[noise_encrypted_len(0)];
-+	struct message_macs macs;
-+};
-+
-+struct message_handshake_cookie {
-+	struct message_header header;
-+	__le32 receiver_index;
-+	u8 nonce[COOKIE_NONCE_LEN];
-+	u8 encrypted_cookie[noise_encrypted_len(COOKIE_LEN)];
-+};
-+
-+struct message_data {
-+	struct message_header header;
-+	__le32 key_idx;
-+	__le64 counter;
-+	u8 encrypted_data[];
-+};
-+
-+#define message_data_len(plain_len) \
-+	(noise_encrypted_len(plain_len) + sizeof(struct message_data))
-+
-+enum message_alignments {
-+	MESSAGE_PADDING_MULTIPLE = 16,
-+	MESSAGE_MINIMUM_LENGTH = message_data_len(0)
-+};
-+
-+#define SKB_HEADER_LEN                                       \
-+	(max(sizeof(struct iphdr), sizeof(struct ipv6hdr)) + \
-+	 sizeof(struct udphdr) + NET_SKB_PAD)
-+#define DATA_PACKET_HEAD_ROOM \
-+	ALIGN(sizeof(struct message_data) + SKB_HEADER_LEN, 4)
-+
-+enum { HANDSHAKE_DSCP = 0x88 /* AF41, plus 00 ECN */ };
-+
-+#endif /* _WG_MESSAGES_H */
---- /dev/null
-+++ b/drivers/net/wireguard/netlink.c
-@@ -0,0 +1,648 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include "netlink.h"
-+#include "device.h"
-+#include "peer.h"
-+#include "socket.h"
-+#include "queueing.h"
-+#include "messages.h"
-+
-+#include <uapi/linux/wireguard.h>
-+
-+#include <linux/if.h>
-+#include <net/genetlink.h>
-+#include <net/sock.h>
-+#include <crypto/algapi.h>
-+
-+static struct genl_family genl_family;
-+
-+static const struct nla_policy device_policy[WGDEVICE_A_MAX + 1] = {
-+	[WGDEVICE_A_IFINDEX]		= { .type = NLA_U32 },
-+	[WGDEVICE_A_IFNAME]		= { .type = NLA_NUL_STRING, .len = IFNAMSIZ - 1 },
-+	[WGDEVICE_A_PRIVATE_KEY]	= { .type = NLA_EXACT_LEN, .len = NOISE_PUBLIC_KEY_LEN },
-+	[WGDEVICE_A_PUBLIC_KEY]		= { .type = NLA_EXACT_LEN, .len = NOISE_PUBLIC_KEY_LEN },
-+	[WGDEVICE_A_FLAGS]		= { .type = NLA_U32 },
-+	[WGDEVICE_A_LISTEN_PORT]	= { .type = NLA_U16 },
-+	[WGDEVICE_A_FWMARK]		= { .type = NLA_U32 },
-+	[WGDEVICE_A_PEERS]		= { .type = NLA_NESTED }
-+};
-+
-+static const struct nla_policy peer_policy[WGPEER_A_MAX + 1] = {
-+	[WGPEER_A_PUBLIC_KEY]				= { .type = NLA_EXACT_LEN, .len = NOISE_PUBLIC_KEY_LEN },
-+	[WGPEER_A_PRESHARED_KEY]			= { .type = NLA_EXACT_LEN, .len = NOISE_SYMMETRIC_KEY_LEN },
-+	[WGPEER_A_FLAGS]				= { .type = NLA_U32 },
-+	[WGPEER_A_ENDPOINT]				= { .type = NLA_MIN_LEN, .len = sizeof(struct sockaddr) },
-+	[WGPEER_A_PERSISTENT_KEEPALIVE_INTERVAL]	= { .type = NLA_U16 },
-+	[WGPEER_A_LAST_HANDSHAKE_TIME]			= { .type = NLA_EXACT_LEN, .len = sizeof(struct __kernel_timespec) },
-+	[WGPEER_A_RX_BYTES]				= { .type = NLA_U64 },
-+	[WGPEER_A_TX_BYTES]				= { .type = NLA_U64 },
-+	[WGPEER_A_ALLOWEDIPS]				= { .type = NLA_NESTED },
-+	[WGPEER_A_PROTOCOL_VERSION]			= { .type = NLA_U32 }
-+};
-+
-+static const struct nla_policy allowedip_policy[WGALLOWEDIP_A_MAX + 1] = {
-+	[WGALLOWEDIP_A_FAMILY]		= { .type = NLA_U16 },
-+	[WGALLOWEDIP_A_IPADDR]		= { .type = NLA_MIN_LEN, .len = sizeof(struct in_addr) },
-+	[WGALLOWEDIP_A_CIDR_MASK]	= { .type = NLA_U8 }
-+};
-+
-+static struct wg_device *lookup_interface(struct nlattr **attrs,
-+					  struct sk_buff *skb)
-+{
-+	struct net_device *dev = NULL;
-+
-+	if (!attrs[WGDEVICE_A_IFINDEX] == !attrs[WGDEVICE_A_IFNAME])
-+		return ERR_PTR(-EBADR);
-+	if (attrs[WGDEVICE_A_IFINDEX])
-+		dev = dev_get_by_index(sock_net(skb->sk),
-+				       nla_get_u32(attrs[WGDEVICE_A_IFINDEX]));
-+	else if (attrs[WGDEVICE_A_IFNAME])
-+		dev = dev_get_by_name(sock_net(skb->sk),
-+				      nla_data(attrs[WGDEVICE_A_IFNAME]));
-+	if (!dev)
-+		return ERR_PTR(-ENODEV);
-+	if (!dev->rtnl_link_ops || !dev->rtnl_link_ops->kind ||
-+	    strcmp(dev->rtnl_link_ops->kind, KBUILD_MODNAME)) {
-+		dev_put(dev);
-+		return ERR_PTR(-EOPNOTSUPP);
-+	}
-+	return netdev_priv(dev);
-+}
-+
-+static int get_allowedips(struct sk_buff *skb, const u8 *ip, u8 cidr,
-+			  int family)
-+{
-+	struct nlattr *allowedip_nest;
-+
-+	allowedip_nest = nla_nest_start(skb, 0);
-+	if (!allowedip_nest)
-+		return -EMSGSIZE;
-+
-+	if (nla_put_u8(skb, WGALLOWEDIP_A_CIDR_MASK, cidr) ||
-+	    nla_put_u16(skb, WGALLOWEDIP_A_FAMILY, family) ||
-+	    nla_put(skb, WGALLOWEDIP_A_IPADDR, family == AF_INET6 ?
-+		    sizeof(struct in6_addr) : sizeof(struct in_addr), ip)) {
-+		nla_nest_cancel(skb, allowedip_nest);
-+		return -EMSGSIZE;
-+	}
-+
-+	nla_nest_end(skb, allowedip_nest);
-+	return 0;
-+}
-+
-+struct dump_ctx {
-+	struct wg_device *wg;
-+	struct wg_peer *next_peer;
-+	u64 allowedips_seq;
-+	struct allowedips_node *next_allowedip;
-+};
-+
-+#define DUMP_CTX(cb) ((struct dump_ctx *)(cb)->args)
-+
-+static int
-+get_peer(struct wg_peer *peer, struct sk_buff *skb, struct dump_ctx *ctx)
-+{
-+
-+	struct nlattr *allowedips_nest, *peer_nest = nla_nest_start(skb, 0);
-+	struct allowedips_node *allowedips_node = ctx->next_allowedip;
-+	bool fail;
-+
-+	if (!peer_nest)
-+		return -EMSGSIZE;
-+
-+	down_read(&peer->handshake.lock);
-+	fail = nla_put(skb, WGPEER_A_PUBLIC_KEY, NOISE_PUBLIC_KEY_LEN,
-+		       peer->handshake.remote_static);
-+	up_read(&peer->handshake.lock);
-+	if (fail)
-+		goto err;
-+
-+	if (!allowedips_node) {
-+		const struct __kernel_timespec last_handshake = {
-+			.tv_sec = peer->walltime_last_handshake.tv_sec,
-+			.tv_nsec = peer->walltime_last_handshake.tv_nsec
-+		};
-+
-+		down_read(&peer->handshake.lock);
-+		fail = nla_put(skb, WGPEER_A_PRESHARED_KEY,
-+			       NOISE_SYMMETRIC_KEY_LEN,
-+			       peer->handshake.preshared_key);
-+		up_read(&peer->handshake.lock);
-+		if (fail)
-+			goto err;
-+
-+		if (nla_put(skb, WGPEER_A_LAST_HANDSHAKE_TIME,
-+			    sizeof(last_handshake), &last_handshake) ||
-+		    nla_put_u16(skb, WGPEER_A_PERSISTENT_KEEPALIVE_INTERVAL,
-+				peer->persistent_keepalive_interval) ||
-+		    nla_put_u64_64bit(skb, WGPEER_A_TX_BYTES, peer->tx_bytes,
-+				      WGPEER_A_UNSPEC) ||
-+		    nla_put_u64_64bit(skb, WGPEER_A_RX_BYTES, peer->rx_bytes,
-+				      WGPEER_A_UNSPEC) ||
-+		    nla_put_u32(skb, WGPEER_A_PROTOCOL_VERSION, 1))
-+			goto err;
-+
-+		read_lock_bh(&peer->endpoint_lock);
-+		if (peer->endpoint.addr.sa_family == AF_INET)
-+			fail = nla_put(skb, WGPEER_A_ENDPOINT,
-+				       sizeof(peer->endpoint.addr4),
-+				       &peer->endpoint.addr4);
-+		else if (peer->endpoint.addr.sa_family == AF_INET6)
-+			fail = nla_put(skb, WGPEER_A_ENDPOINT,
-+				       sizeof(peer->endpoint.addr6),
-+				       &peer->endpoint.addr6);
-+		read_unlock_bh(&peer->endpoint_lock);
-+		if (fail)
-+			goto err;
-+		allowedips_node =
-+			list_first_entry_or_null(&peer->allowedips_list,
-+					struct allowedips_node, peer_list);
-+	}
-+	if (!allowedips_node)
-+		goto no_allowedips;
-+	if (!ctx->allowedips_seq)
-+		ctx->allowedips_seq = peer->device->peer_allowedips.seq;
-+	else if (ctx->allowedips_seq != peer->device->peer_allowedips.seq)
-+		goto no_allowedips;
-+
-+	allowedips_nest = nla_nest_start(skb, WGPEER_A_ALLOWEDIPS);
-+	if (!allowedips_nest)
-+		goto err;
-+
-+	list_for_each_entry_from(allowedips_node, &peer->allowedips_list,
-+				 peer_list) {
-+		u8 cidr, ip[16] __aligned(__alignof(u64));
-+		int family;
-+
-+		family = wg_allowedips_read_node(allowedips_node, ip, &cidr);
-+		if (get_allowedips(skb, ip, cidr, family)) {
-+			nla_nest_end(skb, allowedips_nest);
-+			nla_nest_end(skb, peer_nest);
-+			ctx->next_allowedip = allowedips_node;
-+			return -EMSGSIZE;
-+		}
-+	}
-+	nla_nest_end(skb, allowedips_nest);
-+no_allowedips:
-+	nla_nest_end(skb, peer_nest);
-+	ctx->next_allowedip = NULL;
-+	ctx->allowedips_seq = 0;
-+	return 0;
-+err:
-+	nla_nest_cancel(skb, peer_nest);
-+	return -EMSGSIZE;
-+}
-+
-+static int wg_get_device_start(struct netlink_callback *cb)
-+{
-+	struct nlattr **attrs = genl_family_attrbuf(&genl_family);
-+	struct wg_device *wg;
-+	int ret;
-+
-+	ret = nlmsg_parse(cb->nlh, GENL_HDRLEN + genl_family.hdrsize, attrs,
-+			  genl_family.maxattr, device_policy, NULL);
-+	if (ret < 0)
-+		return ret;
-+	wg = lookup_interface(attrs, cb->skb);
-+	if (IS_ERR(wg))
-+		return PTR_ERR(wg);
-+	DUMP_CTX(cb)->wg = wg;
-+	return 0;
-+}
-+
-+static int wg_get_device_dump(struct sk_buff *skb, struct netlink_callback *cb)
-+{
-+	struct wg_peer *peer, *next_peer_cursor;
-+	struct dump_ctx *ctx = DUMP_CTX(cb);
-+	struct wg_device *wg = ctx->wg;
-+	struct nlattr *peers_nest;
-+	int ret = -EMSGSIZE;
-+	bool done = true;
-+	void *hdr;
-+
-+	rtnl_lock();
-+	mutex_lock(&wg->device_update_lock);
-+	cb->seq = wg->device_update_gen;
-+	next_peer_cursor = ctx->next_peer;
-+
-+	hdr = genlmsg_put(skb, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq,
-+			  &genl_family, NLM_F_MULTI, WG_CMD_GET_DEVICE);
-+	if (!hdr)
-+		goto out;
-+	genl_dump_check_consistent(cb, hdr);
-+
-+	if (!ctx->next_peer) {
-+		if (nla_put_u16(skb, WGDEVICE_A_LISTEN_PORT,
-+				wg->incoming_port) ||
-+		    nla_put_u32(skb, WGDEVICE_A_FWMARK, wg->fwmark) ||
-+		    nla_put_u32(skb, WGDEVICE_A_IFINDEX, wg->dev->ifindex) ||
-+		    nla_put_string(skb, WGDEVICE_A_IFNAME, wg->dev->name))
-+			goto out;
-+
-+		down_read(&wg->static_identity.lock);
-+		if (wg->static_identity.has_identity) {
-+			if (nla_put(skb, WGDEVICE_A_PRIVATE_KEY,
-+				    NOISE_PUBLIC_KEY_LEN,
-+				    wg->static_identity.static_private) ||
-+			    nla_put(skb, WGDEVICE_A_PUBLIC_KEY,
-+				    NOISE_PUBLIC_KEY_LEN,
-+				    wg->static_identity.static_public)) {
-+				up_read(&wg->static_identity.lock);
-+				goto out;
-+			}
-+		}
-+		up_read(&wg->static_identity.lock);
-+	}
-+
-+	peers_nest = nla_nest_start(skb, WGDEVICE_A_PEERS);
-+	if (!peers_nest)
-+		goto out;
-+	ret = 0;
-+	/* If the last cursor was removed via list_del_init in peer_remove, then
-+	 * we just treat this the same as there being no more peers left. The
-+	 * reason is that seq_nr should indicate to userspace that this isn't a
-+	 * coherent dump anyway, so they'll try again.
-+	 */
-+	if (list_empty(&wg->peer_list) ||
-+	    (ctx->next_peer && list_empty(&ctx->next_peer->peer_list))) {
-+		nla_nest_cancel(skb, peers_nest);
-+		goto out;
-+	}
-+	lockdep_assert_held(&wg->device_update_lock);
-+	peer = list_prepare_entry(ctx->next_peer, &wg->peer_list, peer_list);
-+	list_for_each_entry_continue(peer, &wg->peer_list, peer_list) {
-+		if (get_peer(peer, skb, ctx)) {
-+			done = false;
-+			break;
-+		}
-+		next_peer_cursor = peer;
-+	}
-+	nla_nest_end(skb, peers_nest);
-+
-+out:
-+	if (!ret && !done && next_peer_cursor)
-+		wg_peer_get(next_peer_cursor);
-+	wg_peer_put(ctx->next_peer);
-+	mutex_unlock(&wg->device_update_lock);
-+	rtnl_unlock();
-+
-+	if (ret) {
-+		genlmsg_cancel(skb, hdr);
-+		return ret;
-+	}
-+	genlmsg_end(skb, hdr);
-+	if (done) {
-+		ctx->next_peer = NULL;
-+		return 0;
-+	}
-+	ctx->next_peer = next_peer_cursor;
-+	return skb->len;
-+
-+	/* At this point, we can't really deal ourselves with safely zeroing out
-+	 * the private key material after usage. This will need an additional API
-+	 * in the kernel for marking skbs as zero_on_free.
-+	 */
-+}
-+
-+static int wg_get_device_done(struct netlink_callback *cb)
-+{
-+	struct dump_ctx *ctx = DUMP_CTX(cb);
-+
-+	if (ctx->wg)
-+		dev_put(ctx->wg->dev);
-+	wg_peer_put(ctx->next_peer);
-+	return 0;
-+}
-+
-+static int set_port(struct wg_device *wg, u16 port)
-+{
-+	struct wg_peer *peer;
-+
-+	if (wg->incoming_port == port)
-+		return 0;
-+	list_for_each_entry(peer, &wg->peer_list, peer_list)
-+		wg_socket_clear_peer_endpoint_src(peer);
-+	if (!netif_running(wg->dev)) {
-+		wg->incoming_port = port;
-+		return 0;
-+	}
-+	return wg_socket_init(wg, port);
-+}
-+
-+static int set_allowedip(struct wg_peer *peer, struct nlattr **attrs)
-+{
-+	int ret = -EINVAL;
-+	u16 family;
-+	u8 cidr;
-+
-+	if (!attrs[WGALLOWEDIP_A_FAMILY] || !attrs[WGALLOWEDIP_A_IPADDR] ||
-+	    !attrs[WGALLOWEDIP_A_CIDR_MASK])
-+		return ret;
-+	family = nla_get_u16(attrs[WGALLOWEDIP_A_FAMILY]);
-+	cidr = nla_get_u8(attrs[WGALLOWEDIP_A_CIDR_MASK]);
-+
-+	if (family == AF_INET && cidr <= 32 &&
-+	    nla_len(attrs[WGALLOWEDIP_A_IPADDR]) == sizeof(struct in_addr))
-+		ret = wg_allowedips_insert_v4(
-+			&peer->device->peer_allowedips,
-+			nla_data(attrs[WGALLOWEDIP_A_IPADDR]), cidr, peer,
-+			&peer->device->device_update_lock);
-+	else if (family == AF_INET6 && cidr <= 128 &&
-+		 nla_len(attrs[WGALLOWEDIP_A_IPADDR]) == sizeof(struct in6_addr))
-+		ret = wg_allowedips_insert_v6(
-+			&peer->device->peer_allowedips,
-+			nla_data(attrs[WGALLOWEDIP_A_IPADDR]), cidr, peer,
-+			&peer->device->device_update_lock);
-+
-+	return ret;
-+}
-+
-+static int set_peer(struct wg_device *wg, struct nlattr **attrs)
-+{
-+	u8 *public_key = NULL, *preshared_key = NULL;
-+	struct wg_peer *peer = NULL;
-+	u32 flags = 0;
-+	int ret;
-+
-+	ret = -EINVAL;
-+	if (attrs[WGPEER_A_PUBLIC_KEY] &&
-+	    nla_len(attrs[WGPEER_A_PUBLIC_KEY]) == NOISE_PUBLIC_KEY_LEN)
-+		public_key = nla_data(attrs[WGPEER_A_PUBLIC_KEY]);
-+	else
-+		goto out;
-+	if (attrs[WGPEER_A_PRESHARED_KEY] &&
-+	    nla_len(attrs[WGPEER_A_PRESHARED_KEY]) == NOISE_SYMMETRIC_KEY_LEN)
-+		preshared_key = nla_data(attrs[WGPEER_A_PRESHARED_KEY]);
-+
-+	if (attrs[WGPEER_A_FLAGS])
-+		flags = nla_get_u32(attrs[WGPEER_A_FLAGS]);
-+	ret = -EOPNOTSUPP;
-+	if (flags & ~__WGPEER_F_ALL)
-+		goto out;
-+
-+	ret = -EPFNOSUPPORT;
-+	if (attrs[WGPEER_A_PROTOCOL_VERSION]) {
-+		if (nla_get_u32(attrs[WGPEER_A_PROTOCOL_VERSION]) != 1)
-+			goto out;
-+	}
-+
-+	peer = wg_pubkey_hashtable_lookup(wg->peer_hashtable,
-+					  nla_data(attrs[WGPEER_A_PUBLIC_KEY]));
-+	ret = 0;
-+	if (!peer) { /* Peer doesn't exist yet. Add a new one. */
-+		if (flags & (WGPEER_F_REMOVE_ME | WGPEER_F_UPDATE_ONLY))
-+			goto out;
-+
-+		/* The peer is new, so there aren't allowed IPs to remove. */
-+		flags &= ~WGPEER_F_REPLACE_ALLOWEDIPS;
-+
-+		down_read(&wg->static_identity.lock);
-+		if (wg->static_identity.has_identity &&
-+		    !memcmp(nla_data(attrs[WGPEER_A_PUBLIC_KEY]),
-+			    wg->static_identity.static_public,
-+			    NOISE_PUBLIC_KEY_LEN)) {
-+			/* We silently ignore peers that have the same public
-+			 * key as the device. The reason we do it silently is
-+			 * that we'd like for people to be able to reuse the
-+			 * same set of API calls across peers.
-+			 */
-+			up_read(&wg->static_identity.lock);
-+			ret = 0;
-+			goto out;
-+		}
-+		up_read(&wg->static_identity.lock);
-+
-+		peer = wg_peer_create(wg, public_key, preshared_key);
-+		if (IS_ERR(peer)) {
-+			/* Similar to the above, if the key is invalid, we skip
-+			 * it without fanfare, so that services don't need to
-+			 * worry about doing key validation themselves.
-+			 */
-+			ret = PTR_ERR(peer) == -EKEYREJECTED ? 0 : PTR_ERR(peer);
-+			peer = NULL;
-+			goto out;
-+		}
-+		/* Take additional reference, as though we've just been
-+		 * looked up.
-+		 */
-+		wg_peer_get(peer);
-+	}
-+
-+	if (flags & WGPEER_F_REMOVE_ME) {
-+		wg_peer_remove(peer);
-+		goto out;
-+	}
-+
-+	if (preshared_key) {
-+		down_write(&peer->handshake.lock);
-+		memcpy(&peer->handshake.preshared_key, preshared_key,
-+		       NOISE_SYMMETRIC_KEY_LEN);
-+		up_write(&peer->handshake.lock);
-+	}
-+
-+	if (attrs[WGPEER_A_ENDPOINT]) {
-+		struct sockaddr *addr = nla_data(attrs[WGPEER_A_ENDPOINT]);
-+		size_t len = nla_len(attrs[WGPEER_A_ENDPOINT]);
-+
-+		if ((len == sizeof(struct sockaddr_in) &&
-+		     addr->sa_family == AF_INET) ||
-+		    (len == sizeof(struct sockaddr_in6) &&
-+		     addr->sa_family == AF_INET6)) {
-+			struct endpoint endpoint = { { { 0 } } };
-+
-+			memcpy(&endpoint.addr, addr, len);
-+			wg_socket_set_peer_endpoint(peer, &endpoint);
-+		}
-+	}
-+
-+	if (flags & WGPEER_F_REPLACE_ALLOWEDIPS)
-+		wg_allowedips_remove_by_peer(&wg->peer_allowedips, peer,
-+					     &wg->device_update_lock);
-+
-+	if (attrs[WGPEER_A_ALLOWEDIPS]) {
-+		struct nlattr *attr, *allowedip[WGALLOWEDIP_A_MAX + 1];
-+		int rem;
-+
-+		nla_for_each_nested(attr, attrs[WGPEER_A_ALLOWEDIPS], rem) {
-+			ret = nla_parse_nested(allowedip, WGALLOWEDIP_A_MAX,
-+					       attr, allowedip_policy, NULL);
-+			if (ret < 0)
-+				goto out;
-+			ret = set_allowedip(peer, allowedip);
-+			if (ret < 0)
-+				goto out;
-+		}
-+	}
-+
-+	if (attrs[WGPEER_A_PERSISTENT_KEEPALIVE_INTERVAL]) {
-+		const u16 persistent_keepalive_interval = nla_get_u16(
-+				attrs[WGPEER_A_PERSISTENT_KEEPALIVE_INTERVAL]);
-+		const bool send_keepalive =
-+			!peer->persistent_keepalive_interval &&
-+			persistent_keepalive_interval &&
-+			netif_running(wg->dev);
-+
-+		peer->persistent_keepalive_interval = persistent_keepalive_interval;
-+		if (send_keepalive)
-+			wg_packet_send_keepalive(peer);
-+	}
-+
-+	if (netif_running(wg->dev))
-+		wg_packet_send_staged_packets(peer);
-+
-+out:
-+	wg_peer_put(peer);
-+	if (attrs[WGPEER_A_PRESHARED_KEY])
-+		memzero_explicit(nla_data(attrs[WGPEER_A_PRESHARED_KEY]),
-+				 nla_len(attrs[WGPEER_A_PRESHARED_KEY]));
-+	return ret;
-+}
-+
-+static int wg_set_device(struct sk_buff *skb, struct genl_info *info)
-+{
-+	struct wg_device *wg = lookup_interface(info->attrs, skb);
-+	u32 flags = 0;
-+	int ret;
-+
-+	if (IS_ERR(wg)) {
-+		ret = PTR_ERR(wg);
-+		goto out_nodev;
-+	}
-+
-+	rtnl_lock();
-+	mutex_lock(&wg->device_update_lock);
-+
-+	if (info->attrs[WGDEVICE_A_FLAGS])
-+		flags = nla_get_u32(info->attrs[WGDEVICE_A_FLAGS]);
-+	ret = -EOPNOTSUPP;
-+	if (flags & ~__WGDEVICE_F_ALL)
-+		goto out;
-+
-+	ret = -EPERM;
-+	if ((info->attrs[WGDEVICE_A_LISTEN_PORT] ||
-+	     info->attrs[WGDEVICE_A_FWMARK]) &&
-+	    !ns_capable(wg->creating_net->user_ns, CAP_NET_ADMIN))
-+		goto out;
-+
-+	++wg->device_update_gen;
-+
-+	if (info->attrs[WGDEVICE_A_FWMARK]) {
-+		struct wg_peer *peer;
-+
-+		wg->fwmark = nla_get_u32(info->attrs[WGDEVICE_A_FWMARK]);
-+		list_for_each_entry(peer, &wg->peer_list, peer_list)
-+			wg_socket_clear_peer_endpoint_src(peer);
-+	}
-+
-+	if (info->attrs[WGDEVICE_A_LISTEN_PORT]) {
-+		ret = set_port(wg,
-+			nla_get_u16(info->attrs[WGDEVICE_A_LISTEN_PORT]));
-+		if (ret)
-+			goto out;
-+	}
-+
-+	if (flags & WGDEVICE_F_REPLACE_PEERS)
-+		wg_peer_remove_all(wg);
-+
-+	if (info->attrs[WGDEVICE_A_PRIVATE_KEY] &&
-+	    nla_len(info->attrs[WGDEVICE_A_PRIVATE_KEY]) ==
-+		    NOISE_PUBLIC_KEY_LEN) {
-+		u8 *private_key = nla_data(info->attrs[WGDEVICE_A_PRIVATE_KEY]);
-+		u8 public_key[NOISE_PUBLIC_KEY_LEN];
-+		struct wg_peer *peer, *temp;
-+
-+		if (!crypto_memneq(wg->static_identity.static_private,
-+				   private_key, NOISE_PUBLIC_KEY_LEN))
-+			goto skip_set_private_key;
-+
-+		/* We remove before setting, to prevent race, which means doing
-+		 * two 25519-genpub ops.
-+		 */
-+		if (curve25519_generate_public(public_key, private_key)) {
-+			peer = wg_pubkey_hashtable_lookup(wg->peer_hashtable,
-+							  public_key);
-+			if (peer) {
-+				wg_peer_put(peer);
-+				wg_peer_remove(peer);
-+			}
-+		}
-+
-+		down_write(&wg->static_identity.lock);
-+		wg_noise_set_static_identity_private_key(&wg->static_identity,
-+							 private_key);
-+		list_for_each_entry_safe(peer, temp, &wg->peer_list,
-+					 peer_list) {
-+			if (wg_noise_precompute_static_static(peer))
-+				wg_noise_expire_current_peer_keypairs(peer);
-+			else
-+				wg_peer_remove(peer);
-+		}
-+		wg_cookie_checker_precompute_device_keys(&wg->cookie_checker);
-+		up_write(&wg->static_identity.lock);
-+	}
-+skip_set_private_key:
-+
-+	if (info->attrs[WGDEVICE_A_PEERS]) {
-+		struct nlattr *attr, *peer[WGPEER_A_MAX + 1];
-+		int rem;
-+
-+		nla_for_each_nested(attr, info->attrs[WGDEVICE_A_PEERS], rem) {
-+			ret = nla_parse_nested(peer, WGPEER_A_MAX, attr,
-+					       peer_policy, NULL);
-+			if (ret < 0)
-+				goto out;
-+			ret = set_peer(wg, peer);
-+			if (ret < 0)
-+				goto out;
-+		}
-+	}
-+	ret = 0;
-+
-+out:
-+	mutex_unlock(&wg->device_update_lock);
-+	rtnl_unlock();
-+	dev_put(wg->dev);
-+out_nodev:
-+	if (info->attrs[WGDEVICE_A_PRIVATE_KEY])
-+		memzero_explicit(nla_data(info->attrs[WGDEVICE_A_PRIVATE_KEY]),
-+				 nla_len(info->attrs[WGDEVICE_A_PRIVATE_KEY]));
-+	return ret;
-+}
-+
-+static const struct genl_ops genl_ops[] = {
-+	{
-+		.cmd = WG_CMD_GET_DEVICE,
-+		.start = wg_get_device_start,
-+		.dumpit = wg_get_device_dump,
-+		.done = wg_get_device_done,
-+		.flags = GENL_UNS_ADMIN_PERM
-+	}, {
-+		.cmd = WG_CMD_SET_DEVICE,
-+		.doit = wg_set_device,
-+		.flags = GENL_UNS_ADMIN_PERM
-+	}
-+};
-+
-+static struct genl_family genl_family __ro_after_init = {
-+	.ops = genl_ops,
-+	.n_ops = ARRAY_SIZE(genl_ops),
-+	.name = WG_GENL_NAME,
-+	.version = WG_GENL_VERSION,
-+	.maxattr = WGDEVICE_A_MAX,
-+	.module = THIS_MODULE,
-+	.policy = device_policy,
-+	.netnsok = true
-+};
-+
-+int __init wg_genetlink_init(void)
-+{
-+	return genl_register_family(&genl_family);
-+}
-+
-+void __exit wg_genetlink_uninit(void)
-+{
-+	genl_unregister_family(&genl_family);
-+}
---- /dev/null
-+++ b/drivers/net/wireguard/netlink.h
-@@ -0,0 +1,12 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifndef _WG_NETLINK_H
-+#define _WG_NETLINK_H
-+
-+int wg_genetlink_init(void);
-+void wg_genetlink_uninit(void);
-+
-+#endif /* _WG_NETLINK_H */
---- /dev/null
-+++ b/drivers/net/wireguard/noise.c
-@@ -0,0 +1,828 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include "noise.h"
-+#include "device.h"
-+#include "peer.h"
-+#include "messages.h"
-+#include "queueing.h"
-+#include "peerlookup.h"
-+
-+#include <linux/rcupdate.h>
-+#include <linux/slab.h>
-+#include <linux/bitmap.h>
-+#include <linux/scatterlist.h>
-+#include <linux/highmem.h>
-+#include <crypto/algapi.h>
-+
-+/* This implements Noise_IKpsk2:
-+ *
-+ * <- s
-+ * ******
-+ * -> e, es, s, ss, {t}
-+ * <- e, ee, se, psk, {}
-+ */
-+
-+static const u8 handshake_name[37] = "Noise_IKpsk2_25519_ChaChaPoly_BLAKE2s";
-+static const u8 identifier_name[34] = "WireGuard v1 zx2c4 Jason@zx2c4.com";
-+static u8 handshake_init_hash[NOISE_HASH_LEN] __ro_after_init;
-+static u8 handshake_init_chaining_key[NOISE_HASH_LEN] __ro_after_init;
-+static atomic64_t keypair_counter = ATOMIC64_INIT(0);
-+
-+void __init wg_noise_init(void)
-+{
-+	struct blake2s_state blake;
-+
-+	blake2s(handshake_init_chaining_key, handshake_name, NULL,
-+		NOISE_HASH_LEN, sizeof(handshake_name), 0);
-+	blake2s_init(&blake, NOISE_HASH_LEN);
-+	blake2s_update(&blake, handshake_init_chaining_key, NOISE_HASH_LEN);
-+	blake2s_update(&blake, identifier_name, sizeof(identifier_name));
-+	blake2s_final(&blake, handshake_init_hash);
-+}
-+
-+/* Must hold peer->handshake.static_identity->lock */
-+bool wg_noise_precompute_static_static(struct wg_peer *peer)
-+{
-+	bool ret = true;
-+
-+	down_write(&peer->handshake.lock);
-+	if (peer->handshake.static_identity->has_identity)
-+		ret = curve25519(
-+			peer->handshake.precomputed_static_static,
-+			peer->handshake.static_identity->static_private,
-+			peer->handshake.remote_static);
-+	else
-+		memset(peer->handshake.precomputed_static_static, 0,
-+		       NOISE_PUBLIC_KEY_LEN);
-+	up_write(&peer->handshake.lock);
-+	return ret;
-+}
-+
-+bool wg_noise_handshake_init(struct noise_handshake *handshake,
-+			   struct noise_static_identity *static_identity,
-+			   const u8 peer_public_key[NOISE_PUBLIC_KEY_LEN],
-+			   const u8 peer_preshared_key[NOISE_SYMMETRIC_KEY_LEN],
-+			   struct wg_peer *peer)
-+{
-+	memset(handshake, 0, sizeof(*handshake));
-+	init_rwsem(&handshake->lock);
-+	handshake->entry.type = INDEX_HASHTABLE_HANDSHAKE;
-+	handshake->entry.peer = peer;
-+	memcpy(handshake->remote_static, peer_public_key, NOISE_PUBLIC_KEY_LEN);
-+	if (peer_preshared_key)
-+		memcpy(handshake->preshared_key, peer_preshared_key,
-+		       NOISE_SYMMETRIC_KEY_LEN);
-+	handshake->static_identity = static_identity;
-+	handshake->state = HANDSHAKE_ZEROED;
-+	return wg_noise_precompute_static_static(peer);
-+}
-+
-+static void handshake_zero(struct noise_handshake *handshake)
-+{
-+	memset(&handshake->ephemeral_private, 0, NOISE_PUBLIC_KEY_LEN);
-+	memset(&handshake->remote_ephemeral, 0, NOISE_PUBLIC_KEY_LEN);
-+	memset(&handshake->hash, 0, NOISE_HASH_LEN);
-+	memset(&handshake->chaining_key, 0, NOISE_HASH_LEN);
-+	handshake->remote_index = 0;
-+	handshake->state = HANDSHAKE_ZEROED;
-+}
-+
-+void wg_noise_handshake_clear(struct noise_handshake *handshake)
-+{
-+	wg_index_hashtable_remove(
-+			handshake->entry.peer->device->index_hashtable,
-+			&handshake->entry);
-+	down_write(&handshake->lock);
-+	handshake_zero(handshake);
-+	up_write(&handshake->lock);
-+	wg_index_hashtable_remove(
-+			handshake->entry.peer->device->index_hashtable,
-+			&handshake->entry);
-+}
-+
-+static struct noise_keypair *keypair_create(struct wg_peer *peer)
-+{
-+	struct noise_keypair *keypair = kzalloc(sizeof(*keypair), GFP_KERNEL);
-+
-+	if (unlikely(!keypair))
-+		return NULL;
-+	keypair->internal_id = atomic64_inc_return(&keypair_counter);
-+	keypair->entry.type = INDEX_HASHTABLE_KEYPAIR;
-+	keypair->entry.peer = peer;
-+	kref_init(&keypair->refcount);
-+	return keypair;
-+}
-+
-+static void keypair_free_rcu(struct rcu_head *rcu)
-+{
-+	kzfree(container_of(rcu, struct noise_keypair, rcu));
-+}
-+
-+static void keypair_free_kref(struct kref *kref)
-+{
-+	struct noise_keypair *keypair =
-+		container_of(kref, struct noise_keypair, refcount);
-+
-+	net_dbg_ratelimited("%s: Keypair %llu destroyed for peer %llu\n",
-+			    keypair->entry.peer->device->dev->name,
-+			    keypair->internal_id,
-+			    keypair->entry.peer->internal_id);
-+	wg_index_hashtable_remove(keypair->entry.peer->device->index_hashtable,
-+				  &keypair->entry);
-+	call_rcu(&keypair->rcu, keypair_free_rcu);
-+}
-+
-+void wg_noise_keypair_put(struct noise_keypair *keypair, bool unreference_now)
-+{
-+	if (unlikely(!keypair))
-+		return;
-+	if (unlikely(unreference_now))
-+		wg_index_hashtable_remove(
-+			keypair->entry.peer->device->index_hashtable,
-+			&keypair->entry);
-+	kref_put(&keypair->refcount, keypair_free_kref);
-+}
-+
-+struct noise_keypair *wg_noise_keypair_get(struct noise_keypair *keypair)
-+{
-+	RCU_LOCKDEP_WARN(!rcu_read_lock_bh_held(),
-+		"Taking noise keypair reference without holding the RCU BH read lock");
-+	if (unlikely(!keypair || !kref_get_unless_zero(&keypair->refcount)))
-+		return NULL;
-+	return keypair;
-+}
-+
-+void wg_noise_keypairs_clear(struct noise_keypairs *keypairs)
-+{
-+	struct noise_keypair *old;
-+
-+	spin_lock_bh(&keypairs->keypair_update_lock);
-+
-+	/* We zero the next_keypair before zeroing the others, so that
-+	 * wg_noise_received_with_keypair returns early before subsequent ones
-+	 * are zeroed.
-+	 */
-+	old = rcu_dereference_protected(keypairs->next_keypair,
-+		lockdep_is_held(&keypairs->keypair_update_lock));
-+	RCU_INIT_POINTER(keypairs->next_keypair, NULL);
-+	wg_noise_keypair_put(old, true);
-+
-+	old = rcu_dereference_protected(keypairs->previous_keypair,
-+		lockdep_is_held(&keypairs->keypair_update_lock));
-+	RCU_INIT_POINTER(keypairs->previous_keypair, NULL);
-+	wg_noise_keypair_put(old, true);
-+
-+	old = rcu_dereference_protected(keypairs->current_keypair,
-+		lockdep_is_held(&keypairs->keypair_update_lock));
-+	RCU_INIT_POINTER(keypairs->current_keypair, NULL);
-+	wg_noise_keypair_put(old, true);
-+
-+	spin_unlock_bh(&keypairs->keypair_update_lock);
-+}
-+
-+void wg_noise_expire_current_peer_keypairs(struct wg_peer *peer)
-+{
-+	struct noise_keypair *keypair;
-+
-+	wg_noise_handshake_clear(&peer->handshake);
-+	wg_noise_reset_last_sent_handshake(&peer->last_sent_handshake);
-+
-+	spin_lock_bh(&peer->keypairs.keypair_update_lock);
-+	keypair = rcu_dereference_protected(peer->keypairs.next_keypair,
-+			lockdep_is_held(&peer->keypairs.keypair_update_lock));
-+	if (keypair)
-+		keypair->sending.is_valid = false;
-+	keypair = rcu_dereference_protected(peer->keypairs.current_keypair,
-+			lockdep_is_held(&peer->keypairs.keypair_update_lock));
-+	if (keypair)
-+		keypair->sending.is_valid = false;
-+	spin_unlock_bh(&peer->keypairs.keypair_update_lock);
-+}
-+
-+static void add_new_keypair(struct noise_keypairs *keypairs,
-+			    struct noise_keypair *new_keypair)
-+{
-+	struct noise_keypair *previous_keypair, *next_keypair, *current_keypair;
-+
-+	spin_lock_bh(&keypairs->keypair_update_lock);
-+	previous_keypair = rcu_dereference_protected(keypairs->previous_keypair,
-+		lockdep_is_held(&keypairs->keypair_update_lock));
-+	next_keypair = rcu_dereference_protected(keypairs->next_keypair,
-+		lockdep_is_held(&keypairs->keypair_update_lock));
-+	current_keypair = rcu_dereference_protected(keypairs->current_keypair,
-+		lockdep_is_held(&keypairs->keypair_update_lock));
-+	if (new_keypair->i_am_the_initiator) {
-+		/* If we're the initiator, it means we've sent a handshake, and
-+		 * received a confirmation response, which means this new
-+		 * keypair can now be used.
-+		 */
-+		if (next_keypair) {
-+			/* If there already was a next keypair pending, we
-+			 * demote it to be the previous keypair, and free the
-+			 * existing current. Note that this means KCI can result
-+			 * in this transition. It would perhaps be more sound to
-+			 * always just get rid of the unused next keypair
-+			 * instead of putting it in the previous slot, but this
-+			 * might be a bit less robust. Something to think about
-+			 * for the future.
-+			 */
-+			RCU_INIT_POINTER(keypairs->next_keypair, NULL);
-+			rcu_assign_pointer(keypairs->previous_keypair,
-+					   next_keypair);
-+			wg_noise_keypair_put(current_keypair, true);
-+		} else /* If there wasn't an existing next keypair, we replace
-+			* the previous with the current one.
-+			*/
-+			rcu_assign_pointer(keypairs->previous_keypair,
-+					   current_keypair);
-+		/* At this point we can get rid of the old previous keypair, and
-+		 * set up the new keypair.
-+		 */
-+		wg_noise_keypair_put(previous_keypair, true);
-+		rcu_assign_pointer(keypairs->current_keypair, new_keypair);
-+	} else {
-+		/* If we're the responder, it means we can't use the new keypair
-+		 * until we receive confirmation via the first data packet, so
-+		 * we get rid of the existing previous one, the possibly
-+		 * existing next one, and slide in the new next one.
-+		 */
-+		rcu_assign_pointer(keypairs->next_keypair, new_keypair);
-+		wg_noise_keypair_put(next_keypair, true);
-+		RCU_INIT_POINTER(keypairs->previous_keypair, NULL);
-+		wg_noise_keypair_put(previous_keypair, true);
-+	}
-+	spin_unlock_bh(&keypairs->keypair_update_lock);
-+}
-+
-+bool wg_noise_received_with_keypair(struct noise_keypairs *keypairs,
-+				    struct noise_keypair *received_keypair)
-+{
-+	struct noise_keypair *old_keypair;
-+	bool key_is_new;
-+
-+	/* We first check without taking the spinlock. */
-+	key_is_new = received_keypair ==
-+		     rcu_access_pointer(keypairs->next_keypair);
-+	if (likely(!key_is_new))
-+		return false;
-+
-+	spin_lock_bh(&keypairs->keypair_update_lock);
-+	/* After locking, we double check that things didn't change from
-+	 * beneath us.
-+	 */
-+	if (unlikely(received_keypair !=
-+		    rcu_dereference_protected(keypairs->next_keypair,
-+			    lockdep_is_held(&keypairs->keypair_update_lock)))) {
-+		spin_unlock_bh(&keypairs->keypair_update_lock);
-+		return false;
-+	}
-+
-+	/* When we've finally received the confirmation, we slide the next
-+	 * into the current, the current into the previous, and get rid of
-+	 * the old previous.
-+	 */
-+	old_keypair = rcu_dereference_protected(keypairs->previous_keypair,
-+		lockdep_is_held(&keypairs->keypair_update_lock));
-+	rcu_assign_pointer(keypairs->previous_keypair,
-+		rcu_dereference_protected(keypairs->current_keypair,
-+			lockdep_is_held(&keypairs->keypair_update_lock)));
-+	wg_noise_keypair_put(old_keypair, true);
-+	rcu_assign_pointer(keypairs->current_keypair, received_keypair);
-+	RCU_INIT_POINTER(keypairs->next_keypair, NULL);
-+
-+	spin_unlock_bh(&keypairs->keypair_update_lock);
-+	return true;
-+}
-+
-+/* Must hold static_identity->lock */
-+void wg_noise_set_static_identity_private_key(
-+	struct noise_static_identity *static_identity,
-+	const u8 private_key[NOISE_PUBLIC_KEY_LEN])
-+{
-+	memcpy(static_identity->static_private, private_key,
-+	       NOISE_PUBLIC_KEY_LEN);
-+	curve25519_clamp_secret(static_identity->static_private);
-+	static_identity->has_identity = curve25519_generate_public(
-+		static_identity->static_public, private_key);
-+}
-+
-+/* This is Hugo Krawczyk's HKDF:
-+ *  - https://eprint.iacr.org/2010/264.pdf
-+ *  - https://tools.ietf.org/html/rfc5869
-+ */
-+static void kdf(u8 *first_dst, u8 *second_dst, u8 *third_dst, const u8 *data,
-+		size_t first_len, size_t second_len, size_t third_len,
-+		size_t data_len, const u8 chaining_key[NOISE_HASH_LEN])
-+{
-+	u8 output[BLAKE2S_HASH_SIZE + 1];
-+	u8 secret[BLAKE2S_HASH_SIZE];
-+
-+	WARN_ON(IS_ENABLED(DEBUG) &&
-+		(first_len > BLAKE2S_HASH_SIZE ||
-+		 second_len > BLAKE2S_HASH_SIZE ||
-+		 third_len > BLAKE2S_HASH_SIZE ||
-+		 ((second_len || second_dst || third_len || third_dst) &&
-+		  (!first_len || !first_dst)) ||
-+		 ((third_len || third_dst) && (!second_len || !second_dst))));
-+
-+	/* Extract entropy from data into secret */
-+	blake2s256_hmac(secret, data, chaining_key, data_len, NOISE_HASH_LEN);
-+
-+	if (!first_dst || !first_len)
-+		goto out;
-+
-+	/* Expand first key: key = secret, data = 0x1 */
-+	output[0] = 1;
-+	blake2s256_hmac(output, output, secret, 1, BLAKE2S_HASH_SIZE);
-+	memcpy(first_dst, output, first_len);
-+
-+	if (!second_dst || !second_len)
-+		goto out;
-+
-+	/* Expand second key: key = secret, data = first-key || 0x2 */
-+	output[BLAKE2S_HASH_SIZE] = 2;
-+	blake2s256_hmac(output, output, secret, BLAKE2S_HASH_SIZE + 1,
-+			BLAKE2S_HASH_SIZE);
-+	memcpy(second_dst, output, second_len);
-+
-+	if (!third_dst || !third_len)
-+		goto out;
-+
-+	/* Expand third key: key = secret, data = second-key || 0x3 */
-+	output[BLAKE2S_HASH_SIZE] = 3;
-+	blake2s256_hmac(output, output, secret, BLAKE2S_HASH_SIZE + 1,
-+			BLAKE2S_HASH_SIZE);
-+	memcpy(third_dst, output, third_len);
-+
-+out:
-+	/* Clear sensitive data from stack */
-+	memzero_explicit(secret, BLAKE2S_HASH_SIZE);
-+	memzero_explicit(output, BLAKE2S_HASH_SIZE + 1);
-+}
-+
-+static void symmetric_key_init(struct noise_symmetric_key *key)
-+{
-+	spin_lock_init(&key->counter.receive.lock);
-+	atomic64_set(&key->counter.counter, 0);
-+	memset(key->counter.receive.backtrack, 0,
-+	       sizeof(key->counter.receive.backtrack));
-+	key->birthdate = ktime_get_coarse_boottime_ns();
-+	key->is_valid = true;
-+}
-+
-+static void derive_keys(struct noise_symmetric_key *first_dst,
-+			struct noise_symmetric_key *second_dst,
-+			const u8 chaining_key[NOISE_HASH_LEN])
-+{
-+	kdf(first_dst->key, second_dst->key, NULL, NULL,
-+	    NOISE_SYMMETRIC_KEY_LEN, NOISE_SYMMETRIC_KEY_LEN, 0, 0,
-+	    chaining_key);
-+	symmetric_key_init(first_dst);
-+	symmetric_key_init(second_dst);
-+}
-+
-+static bool __must_check mix_dh(u8 chaining_key[NOISE_HASH_LEN],
-+				u8 key[NOISE_SYMMETRIC_KEY_LEN],
-+				const u8 private[NOISE_PUBLIC_KEY_LEN],
-+				const u8 public[NOISE_PUBLIC_KEY_LEN])
-+{
-+	u8 dh_calculation[NOISE_PUBLIC_KEY_LEN];
-+
-+	if (unlikely(!curve25519(dh_calculation, private, public)))
-+		return false;
-+	kdf(chaining_key, key, NULL, dh_calculation, NOISE_HASH_LEN,
-+	    NOISE_SYMMETRIC_KEY_LEN, 0, NOISE_PUBLIC_KEY_LEN, chaining_key);
-+	memzero_explicit(dh_calculation, NOISE_PUBLIC_KEY_LEN);
-+	return true;
-+}
-+
-+static void mix_hash(u8 hash[NOISE_HASH_LEN], const u8 *src, size_t src_len)
-+{
-+	struct blake2s_state blake;
-+
-+	blake2s_init(&blake, NOISE_HASH_LEN);
-+	blake2s_update(&blake, hash, NOISE_HASH_LEN);
-+	blake2s_update(&blake, src, src_len);
-+	blake2s_final(&blake, hash);
-+}
-+
-+static void mix_psk(u8 chaining_key[NOISE_HASH_LEN], u8 hash[NOISE_HASH_LEN],
-+		    u8 key[NOISE_SYMMETRIC_KEY_LEN],
-+		    const u8 psk[NOISE_SYMMETRIC_KEY_LEN])
-+{
-+	u8 temp_hash[NOISE_HASH_LEN];
-+
-+	kdf(chaining_key, temp_hash, key, psk, NOISE_HASH_LEN, NOISE_HASH_LEN,
-+	    NOISE_SYMMETRIC_KEY_LEN, NOISE_SYMMETRIC_KEY_LEN, chaining_key);
-+	mix_hash(hash, temp_hash, NOISE_HASH_LEN);
-+	memzero_explicit(temp_hash, NOISE_HASH_LEN);
-+}
-+
-+static void handshake_init(u8 chaining_key[NOISE_HASH_LEN],
-+			   u8 hash[NOISE_HASH_LEN],
-+			   const u8 remote_static[NOISE_PUBLIC_KEY_LEN])
-+{
-+	memcpy(hash, handshake_init_hash, NOISE_HASH_LEN);
-+	memcpy(chaining_key, handshake_init_chaining_key, NOISE_HASH_LEN);
-+	mix_hash(hash, remote_static, NOISE_PUBLIC_KEY_LEN);
-+}
-+
-+static void message_encrypt(u8 *dst_ciphertext, const u8 *src_plaintext,
-+			    size_t src_len, u8 key[NOISE_SYMMETRIC_KEY_LEN],
-+			    u8 hash[NOISE_HASH_LEN])
-+{
-+	chacha20poly1305_encrypt(dst_ciphertext, src_plaintext, src_len, hash,
-+				 NOISE_HASH_LEN,
-+				 0 /* Always zero for Noise_IK */, key);
-+	mix_hash(hash, dst_ciphertext, noise_encrypted_len(src_len));
-+}
-+
-+static bool message_decrypt(u8 *dst_plaintext, const u8 *src_ciphertext,
-+			    size_t src_len, u8 key[NOISE_SYMMETRIC_KEY_LEN],
-+			    u8 hash[NOISE_HASH_LEN])
-+{
-+	if (!chacha20poly1305_decrypt(dst_plaintext, src_ciphertext, src_len,
-+				      hash, NOISE_HASH_LEN,
-+				      0 /* Always zero for Noise_IK */, key))
-+		return false;
-+	mix_hash(hash, src_ciphertext, src_len);
-+	return true;
-+}
-+
-+static void message_ephemeral(u8 ephemeral_dst[NOISE_PUBLIC_KEY_LEN],
-+			      const u8 ephemeral_src[NOISE_PUBLIC_KEY_LEN],
-+			      u8 chaining_key[NOISE_HASH_LEN],
-+			      u8 hash[NOISE_HASH_LEN])
-+{
-+	if (ephemeral_dst != ephemeral_src)
-+		memcpy(ephemeral_dst, ephemeral_src, NOISE_PUBLIC_KEY_LEN);
-+	mix_hash(hash, ephemeral_src, NOISE_PUBLIC_KEY_LEN);
-+	kdf(chaining_key, NULL, NULL, ephemeral_src, NOISE_HASH_LEN, 0, 0,
-+	    NOISE_PUBLIC_KEY_LEN, chaining_key);
-+}
-+
-+static void tai64n_now(u8 output[NOISE_TIMESTAMP_LEN])
-+{
-+	struct timespec64 now;
-+
-+	ktime_get_real_ts64(&now);
-+
-+	/* In order to prevent some sort of infoleak from precise timers, we
-+	 * round down the nanoseconds part to the closest rounded-down power of
-+	 * two to the maximum initiations per second allowed anyway by the
-+	 * implementation.
-+	 */
-+	now.tv_nsec = ALIGN_DOWN(now.tv_nsec,
-+		rounddown_pow_of_two(NSEC_PER_SEC / INITIATIONS_PER_SECOND));
-+
-+	/* https://cr.yp.to/libtai/tai64.html */
-+	*(__be64 *)output = cpu_to_be64(0x400000000000000aULL + now.tv_sec);
-+	*(__be32 *)(output + sizeof(__be64)) = cpu_to_be32(now.tv_nsec);
-+}
-+
-+bool
-+wg_noise_handshake_create_initiation(struct message_handshake_initiation *dst,
-+				     struct noise_handshake *handshake)
-+{
-+	u8 timestamp[NOISE_TIMESTAMP_LEN];
-+	u8 key[NOISE_SYMMETRIC_KEY_LEN];
-+	bool ret = false;
-+
-+	/* We need to wait for crng _before_ taking any locks, since
-+	 * curve25519_generate_secret uses get_random_bytes_wait.
-+	 */
-+	wait_for_random_bytes();
-+
-+	down_read(&handshake->static_identity->lock);
-+	down_write(&handshake->lock);
-+
-+	if (unlikely(!handshake->static_identity->has_identity))
-+		goto out;
-+
-+	dst->header.type = cpu_to_le32(MESSAGE_HANDSHAKE_INITIATION);
-+
-+	handshake_init(handshake->chaining_key, handshake->hash,
-+		       handshake->remote_static);
-+
-+	/* e */
-+	curve25519_generate_secret(handshake->ephemeral_private);
-+	if (!curve25519_generate_public(dst->unencrypted_ephemeral,
-+					handshake->ephemeral_private))
-+		goto out;
-+	message_ephemeral(dst->unencrypted_ephemeral,
-+			  dst->unencrypted_ephemeral, handshake->chaining_key,
-+			  handshake->hash);
-+
-+	/* es */
-+	if (!mix_dh(handshake->chaining_key, key, handshake->ephemeral_private,
-+		    handshake->remote_static))
-+		goto out;
-+
-+	/* s */
-+	message_encrypt(dst->encrypted_static,
-+			handshake->static_identity->static_public,
-+			NOISE_PUBLIC_KEY_LEN, key, handshake->hash);
-+
-+	/* ss */
-+	kdf(handshake->chaining_key, key, NULL,
-+	    handshake->precomputed_static_static, NOISE_HASH_LEN,
-+	    NOISE_SYMMETRIC_KEY_LEN, 0, NOISE_PUBLIC_KEY_LEN,
-+	    handshake->chaining_key);
-+
-+	/* {t} */
-+	tai64n_now(timestamp);
-+	message_encrypt(dst->encrypted_timestamp, timestamp,
-+			NOISE_TIMESTAMP_LEN, key, handshake->hash);
-+
-+	dst->sender_index = wg_index_hashtable_insert(
-+		handshake->entry.peer->device->index_hashtable,
-+		&handshake->entry);
-+
-+	handshake->state = HANDSHAKE_CREATED_INITIATION;
-+	ret = true;
-+
-+out:
-+	up_write(&handshake->lock);
-+	up_read(&handshake->static_identity->lock);
-+	memzero_explicit(key, NOISE_SYMMETRIC_KEY_LEN);
-+	return ret;
-+}
-+
-+struct wg_peer *
-+wg_noise_handshake_consume_initiation(struct message_handshake_initiation *src,
-+				      struct wg_device *wg)
-+{
-+	struct wg_peer *peer = NULL, *ret_peer = NULL;
-+	struct noise_handshake *handshake;
-+	bool replay_attack, flood_attack;
-+	u8 key[NOISE_SYMMETRIC_KEY_LEN];
-+	u8 chaining_key[NOISE_HASH_LEN];
-+	u8 hash[NOISE_HASH_LEN];
-+	u8 s[NOISE_PUBLIC_KEY_LEN];
-+	u8 e[NOISE_PUBLIC_KEY_LEN];
-+	u8 t[NOISE_TIMESTAMP_LEN];
-+	u64 initiation_consumption;
-+
-+	down_read(&wg->static_identity.lock);
-+	if (unlikely(!wg->static_identity.has_identity))
-+		goto out;
-+
-+	handshake_init(chaining_key, hash, wg->static_identity.static_public);
-+
-+	/* e */
-+	message_ephemeral(e, src->unencrypted_ephemeral, chaining_key, hash);
-+
-+	/* es */
-+	if (!mix_dh(chaining_key, key, wg->static_identity.static_private, e))
-+		goto out;
-+
-+	/* s */
-+	if (!message_decrypt(s, src->encrypted_static,
-+			     sizeof(src->encrypted_static), key, hash))
-+		goto out;
-+
-+	/* Lookup which peer we're actually talking to */
-+	peer = wg_pubkey_hashtable_lookup(wg->peer_hashtable, s);
-+	if (!peer)
-+		goto out;
-+	handshake = &peer->handshake;
-+
-+	/* ss */
-+	kdf(chaining_key, key, NULL, handshake->precomputed_static_static,
-+	    NOISE_HASH_LEN, NOISE_SYMMETRIC_KEY_LEN, 0, NOISE_PUBLIC_KEY_LEN,
-+	    chaining_key);
-+
-+	/* {t} */
-+	if (!message_decrypt(t, src->encrypted_timestamp,
-+			     sizeof(src->encrypted_timestamp), key, hash))
-+		goto out;
-+
-+	down_read(&handshake->lock);
-+	replay_attack = memcmp(t, handshake->latest_timestamp,
-+			       NOISE_TIMESTAMP_LEN) <= 0;
-+	flood_attack = (s64)handshake->last_initiation_consumption +
-+			       NSEC_PER_SEC / INITIATIONS_PER_SECOND >
-+		       (s64)ktime_get_coarse_boottime_ns();
-+	up_read(&handshake->lock);
-+	if (replay_attack || flood_attack)
-+		goto out;
-+
-+	/* Success! Copy everything to peer */
-+	down_write(&handshake->lock);
-+	memcpy(handshake->remote_ephemeral, e, NOISE_PUBLIC_KEY_LEN);
-+	if (memcmp(t, handshake->latest_timestamp, NOISE_TIMESTAMP_LEN) > 0)
-+		memcpy(handshake->latest_timestamp, t, NOISE_TIMESTAMP_LEN);
-+	memcpy(handshake->hash, hash, NOISE_HASH_LEN);
-+	memcpy(handshake->chaining_key, chaining_key, NOISE_HASH_LEN);
-+	handshake->remote_index = src->sender_index;
-+	if ((s64)(handshake->last_initiation_consumption -
-+	    (initiation_consumption = ktime_get_coarse_boottime_ns())) < 0)
-+		handshake->last_initiation_consumption = initiation_consumption;
-+	handshake->state = HANDSHAKE_CONSUMED_INITIATION;
-+	up_write(&handshake->lock);
-+	ret_peer = peer;
-+
-+out:
-+	memzero_explicit(key, NOISE_SYMMETRIC_KEY_LEN);
-+	memzero_explicit(hash, NOISE_HASH_LEN);
-+	memzero_explicit(chaining_key, NOISE_HASH_LEN);
-+	up_read(&wg->static_identity.lock);
-+	if (!ret_peer)
-+		wg_peer_put(peer);
-+	return ret_peer;
-+}
-+
-+bool wg_noise_handshake_create_response(struct message_handshake_response *dst,
-+					struct noise_handshake *handshake)
-+{
-+	u8 key[NOISE_SYMMETRIC_KEY_LEN];
-+	bool ret = false;
-+
-+	/* We need to wait for crng _before_ taking any locks, since
-+	 * curve25519_generate_secret uses get_random_bytes_wait.
-+	 */
-+	wait_for_random_bytes();
-+
-+	down_read(&handshake->static_identity->lock);
-+	down_write(&handshake->lock);
-+
-+	if (handshake->state != HANDSHAKE_CONSUMED_INITIATION)
-+		goto out;
-+
-+	dst->header.type = cpu_to_le32(MESSAGE_HANDSHAKE_RESPONSE);
-+	dst->receiver_index = handshake->remote_index;
-+
-+	/* e */
-+	curve25519_generate_secret(handshake->ephemeral_private);
-+	if (!curve25519_generate_public(dst->unencrypted_ephemeral,
-+					handshake->ephemeral_private))
-+		goto out;
-+	message_ephemeral(dst->unencrypted_ephemeral,
-+			  dst->unencrypted_ephemeral, handshake->chaining_key,
-+			  handshake->hash);
-+
-+	/* ee */
-+	if (!mix_dh(handshake->chaining_key, NULL, handshake->ephemeral_private,
-+		    handshake->remote_ephemeral))
-+		goto out;
-+
-+	/* se */
-+	if (!mix_dh(handshake->chaining_key, NULL, handshake->ephemeral_private,
-+		    handshake->remote_static))
-+		goto out;
-+
-+	/* psk */
-+	mix_psk(handshake->chaining_key, handshake->hash, key,
-+		handshake->preshared_key);
-+
-+	/* {} */
-+	message_encrypt(dst->encrypted_nothing, NULL, 0, key, handshake->hash);
-+
-+	dst->sender_index = wg_index_hashtable_insert(
-+		handshake->entry.peer->device->index_hashtable,
-+		&handshake->entry);
-+
-+	handshake->state = HANDSHAKE_CREATED_RESPONSE;
-+	ret = true;
-+
-+out:
-+	up_write(&handshake->lock);
-+	up_read(&handshake->static_identity->lock);
-+	memzero_explicit(key, NOISE_SYMMETRIC_KEY_LEN);
-+	return ret;
-+}
-+
-+struct wg_peer *
-+wg_noise_handshake_consume_response(struct message_handshake_response *src,
-+				    struct wg_device *wg)
-+{
-+	enum noise_handshake_state state = HANDSHAKE_ZEROED;
-+	struct wg_peer *peer = NULL, *ret_peer = NULL;
-+	struct noise_handshake *handshake;
-+	u8 key[NOISE_SYMMETRIC_KEY_LEN];
-+	u8 hash[NOISE_HASH_LEN];
-+	u8 chaining_key[NOISE_HASH_LEN];
-+	u8 e[NOISE_PUBLIC_KEY_LEN];
-+	u8 ephemeral_private[NOISE_PUBLIC_KEY_LEN];
-+	u8 static_private[NOISE_PUBLIC_KEY_LEN];
-+
-+	down_read(&wg->static_identity.lock);
-+
-+	if (unlikely(!wg->static_identity.has_identity))
-+		goto out;
-+
-+	handshake = (struct noise_handshake *)wg_index_hashtable_lookup(
-+		wg->index_hashtable, INDEX_HASHTABLE_HANDSHAKE,
-+		src->receiver_index, &peer);
-+	if (unlikely(!handshake))
-+		goto out;
-+
-+	down_read(&handshake->lock);
-+	state = handshake->state;
-+	memcpy(hash, handshake->hash, NOISE_HASH_LEN);
-+	memcpy(chaining_key, handshake->chaining_key, NOISE_HASH_LEN);
-+	memcpy(ephemeral_private, handshake->ephemeral_private,
-+	       NOISE_PUBLIC_KEY_LEN);
-+	up_read(&handshake->lock);
-+
-+	if (state != HANDSHAKE_CREATED_INITIATION)
-+		goto fail;
-+
-+	/* e */
-+	message_ephemeral(e, src->unencrypted_ephemeral, chaining_key, hash);
-+
-+	/* ee */
-+	if (!mix_dh(chaining_key, NULL, ephemeral_private, e))
-+		goto fail;
-+
-+	/* se */
-+	if (!mix_dh(chaining_key, NULL, wg->static_identity.static_private, e))
-+		goto fail;
-+
-+	/* psk */
-+	mix_psk(chaining_key, hash, key, handshake->preshared_key);
-+
-+	/* {} */
-+	if (!message_decrypt(NULL, src->encrypted_nothing,
-+			     sizeof(src->encrypted_nothing), key, hash))
-+		goto fail;
-+
-+	/* Success! Copy everything to peer */
-+	down_write(&handshake->lock);
-+	/* It's important to check that the state is still the same, while we
-+	 * have an exclusive lock.
-+	 */
-+	if (handshake->state != state) {
-+		up_write(&handshake->lock);
-+		goto fail;
-+	}
-+	memcpy(handshake->remote_ephemeral, e, NOISE_PUBLIC_KEY_LEN);
-+	memcpy(handshake->hash, hash, NOISE_HASH_LEN);
-+	memcpy(handshake->chaining_key, chaining_key, NOISE_HASH_LEN);
-+	handshake->remote_index = src->sender_index;
-+	handshake->state = HANDSHAKE_CONSUMED_RESPONSE;
-+	up_write(&handshake->lock);
-+	ret_peer = peer;
-+	goto out;
-+
-+fail:
-+	wg_peer_put(peer);
-+out:
-+	memzero_explicit(key, NOISE_SYMMETRIC_KEY_LEN);
-+	memzero_explicit(hash, NOISE_HASH_LEN);
-+	memzero_explicit(chaining_key, NOISE_HASH_LEN);
-+	memzero_explicit(ephemeral_private, NOISE_PUBLIC_KEY_LEN);
-+	memzero_explicit(static_private, NOISE_PUBLIC_KEY_LEN);
-+	up_read(&wg->static_identity.lock);
-+	return ret_peer;
-+}
-+
-+bool wg_noise_handshake_begin_session(struct noise_handshake *handshake,
-+				      struct noise_keypairs *keypairs)
-+{
-+	struct noise_keypair *new_keypair;
-+	bool ret = false;
-+
-+	down_write(&handshake->lock);
-+	if (handshake->state != HANDSHAKE_CREATED_RESPONSE &&
-+	    handshake->state != HANDSHAKE_CONSUMED_RESPONSE)
-+		goto out;
-+
-+	new_keypair = keypair_create(handshake->entry.peer);
-+	if (!new_keypair)
-+		goto out;
-+	new_keypair->i_am_the_initiator = handshake->state ==
-+					  HANDSHAKE_CONSUMED_RESPONSE;
-+	new_keypair->remote_index = handshake->remote_index;
-+
-+	if (new_keypair->i_am_the_initiator)
-+		derive_keys(&new_keypair->sending, &new_keypair->receiving,
-+			    handshake->chaining_key);
-+	else
-+		derive_keys(&new_keypair->receiving, &new_keypair->sending,
-+			    handshake->chaining_key);
-+
-+	handshake_zero(handshake);
-+	rcu_read_lock_bh();
-+	if (likely(!READ_ONCE(container_of(handshake, struct wg_peer,
-+					   handshake)->is_dead))) {
-+		add_new_keypair(keypairs, new_keypair);
-+		net_dbg_ratelimited("%s: Keypair %llu created for peer %llu\n",
-+				    handshake->entry.peer->device->dev->name,
-+				    new_keypair->internal_id,
-+				    handshake->entry.peer->internal_id);
-+		ret = wg_index_hashtable_replace(
-+			handshake->entry.peer->device->index_hashtable,
-+			&handshake->entry, &new_keypair->entry);
-+	} else {
-+		kzfree(new_keypair);
-+	}
-+	rcu_read_unlock_bh();
-+
-+out:
-+	up_write(&handshake->lock);
-+	return ret;
-+}
---- /dev/null
-+++ b/drivers/net/wireguard/noise.h
-@@ -0,0 +1,137 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+#ifndef _WG_NOISE_H
-+#define _WG_NOISE_H
-+
-+#include "messages.h"
-+#include "peerlookup.h"
-+
-+#include <linux/types.h>
-+#include <linux/spinlock.h>
-+#include <linux/atomic.h>
-+#include <linux/rwsem.h>
-+#include <linux/mutex.h>
-+#include <linux/kref.h>
-+
-+union noise_counter {
-+	struct {
-+		u64 counter;
-+		unsigned long backtrack[COUNTER_BITS_TOTAL / BITS_PER_LONG];
-+		spinlock_t lock;
-+	} receive;
-+	atomic64_t counter;
-+};
-+
-+struct noise_symmetric_key {
-+	u8 key[NOISE_SYMMETRIC_KEY_LEN];
-+	union noise_counter counter;
-+	u64 birthdate;
-+	bool is_valid;
-+};
-+
-+struct noise_keypair {
-+	struct index_hashtable_entry entry;
-+	struct noise_symmetric_key sending;
-+	struct noise_symmetric_key receiving;
-+	__le32 remote_index;
-+	bool i_am_the_initiator;
-+	struct kref refcount;
-+	struct rcu_head rcu;
-+	u64 internal_id;
-+};
-+
-+struct noise_keypairs {
-+	struct noise_keypair __rcu *current_keypair;
-+	struct noise_keypair __rcu *previous_keypair;
-+	struct noise_keypair __rcu *next_keypair;
-+	spinlock_t keypair_update_lock;
-+};
-+
-+struct noise_static_identity {
-+	u8 static_public[NOISE_PUBLIC_KEY_LEN];
-+	u8 static_private[NOISE_PUBLIC_KEY_LEN];
-+	struct rw_semaphore lock;
-+	bool has_identity;
-+};
-+
-+enum noise_handshake_state {
-+	HANDSHAKE_ZEROED,
-+	HANDSHAKE_CREATED_INITIATION,
-+	HANDSHAKE_CONSUMED_INITIATION,
-+	HANDSHAKE_CREATED_RESPONSE,
-+	HANDSHAKE_CONSUMED_RESPONSE
-+};
-+
-+struct noise_handshake {
-+	struct index_hashtable_entry entry;
-+
-+	enum noise_handshake_state state;
-+	u64 last_initiation_consumption;
-+
-+	struct noise_static_identity *static_identity;
-+
-+	u8 ephemeral_private[NOISE_PUBLIC_KEY_LEN];
-+	u8 remote_static[NOISE_PUBLIC_KEY_LEN];
-+	u8 remote_ephemeral[NOISE_PUBLIC_KEY_LEN];
-+	u8 precomputed_static_static[NOISE_PUBLIC_KEY_LEN];
-+
-+	u8 preshared_key[NOISE_SYMMETRIC_KEY_LEN];
-+
-+	u8 hash[NOISE_HASH_LEN];
-+	u8 chaining_key[NOISE_HASH_LEN];
-+
-+	u8 latest_timestamp[NOISE_TIMESTAMP_LEN];
-+	__le32 remote_index;
-+
-+	/* Protects all members except the immutable (after noise_handshake_
-+	 * init): remote_static, precomputed_static_static, static_identity.
-+	 */
-+	struct rw_semaphore lock;
-+};
-+
-+struct wg_device;
-+
-+void wg_noise_init(void);
-+bool wg_noise_handshake_init(struct noise_handshake *handshake,
-+			   struct noise_static_identity *static_identity,
-+			   const u8 peer_public_key[NOISE_PUBLIC_KEY_LEN],
-+			   const u8 peer_preshared_key[NOISE_SYMMETRIC_KEY_LEN],
-+			   struct wg_peer *peer);
-+void wg_noise_handshake_clear(struct noise_handshake *handshake);
-+static inline void wg_noise_reset_last_sent_handshake(atomic64_t *handshake_ns)
-+{
-+	atomic64_set(handshake_ns, ktime_get_coarse_boottime_ns() -
-+				       (u64)(REKEY_TIMEOUT + 1) * NSEC_PER_SEC);
-+}
-+
-+void wg_noise_keypair_put(struct noise_keypair *keypair, bool unreference_now);
-+struct noise_keypair *wg_noise_keypair_get(struct noise_keypair *keypair);
-+void wg_noise_keypairs_clear(struct noise_keypairs *keypairs);
-+bool wg_noise_received_with_keypair(struct noise_keypairs *keypairs,
-+				    struct noise_keypair *received_keypair);
-+void wg_noise_expire_current_peer_keypairs(struct wg_peer *peer);
-+
-+void wg_noise_set_static_identity_private_key(
-+	struct noise_static_identity *static_identity,
-+	const u8 private_key[NOISE_PUBLIC_KEY_LEN]);
-+bool wg_noise_precompute_static_static(struct wg_peer *peer);
-+
-+bool
-+wg_noise_handshake_create_initiation(struct message_handshake_initiation *dst,
-+				     struct noise_handshake *handshake);
-+struct wg_peer *
-+wg_noise_handshake_consume_initiation(struct message_handshake_initiation *src,
-+				      struct wg_device *wg);
-+
-+bool wg_noise_handshake_create_response(struct message_handshake_response *dst,
-+					struct noise_handshake *handshake);
-+struct wg_peer *
-+wg_noise_handshake_consume_response(struct message_handshake_response *src,
-+				    struct wg_device *wg);
-+
-+bool wg_noise_handshake_begin_session(struct noise_handshake *handshake,
-+				      struct noise_keypairs *keypairs);
-+
-+#endif /* _WG_NOISE_H */
---- /dev/null
-+++ b/drivers/net/wireguard/peer.c
-@@ -0,0 +1,240 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include "peer.h"
-+#include "device.h"
-+#include "queueing.h"
-+#include "timers.h"
-+#include "peerlookup.h"
-+#include "noise.h"
-+
-+#include <linux/kref.h>
-+#include <linux/lockdep.h>
-+#include <linux/rcupdate.h>
-+#include <linux/list.h>
-+
-+static atomic64_t peer_counter = ATOMIC64_INIT(0);
-+
-+struct wg_peer *wg_peer_create(struct wg_device *wg,
-+			       const u8 public_key[NOISE_PUBLIC_KEY_LEN],
-+			       const u8 preshared_key[NOISE_SYMMETRIC_KEY_LEN])
-+{
-+	struct wg_peer *peer;
-+	int ret = -ENOMEM;
-+
-+	lockdep_assert_held(&wg->device_update_lock);
-+
-+	if (wg->num_peers >= MAX_PEERS_PER_DEVICE)
-+		return ERR_PTR(ret);
-+
-+	peer = kzalloc(sizeof(*peer), GFP_KERNEL);
-+	if (unlikely(!peer))
-+		return ERR_PTR(ret);
-+	peer->device = wg;
-+
-+	if (!wg_noise_handshake_init(&peer->handshake, &wg->static_identity,
-+				     public_key, preshared_key, peer)) {
-+		ret = -EKEYREJECTED;
-+		goto err_1;
-+	}
-+	if (dst_cache_init(&peer->endpoint_cache, GFP_KERNEL))
-+		goto err_1;
-+	if (wg_packet_queue_init(&peer->tx_queue, wg_packet_tx_worker, false,
-+				 MAX_QUEUED_PACKETS))
-+		goto err_2;
-+	if (wg_packet_queue_init(&peer->rx_queue, NULL, false,
-+				 MAX_QUEUED_PACKETS))
-+		goto err_3;
-+
-+	peer->internal_id = atomic64_inc_return(&peer_counter);
-+	peer->serial_work_cpu = nr_cpumask_bits;
-+	wg_cookie_init(&peer->latest_cookie);
-+	wg_timers_init(peer);
-+	wg_cookie_checker_precompute_peer_keys(peer);
-+	spin_lock_init(&peer->keypairs.keypair_update_lock);
-+	INIT_WORK(&peer->transmit_handshake_work,
-+		  wg_packet_handshake_send_worker);
-+	rwlock_init(&peer->endpoint_lock);
-+	kref_init(&peer->refcount);
-+	skb_queue_head_init(&peer->staged_packet_queue);
-+	wg_noise_reset_last_sent_handshake(&peer->last_sent_handshake);
-+	set_bit(NAPI_STATE_NO_BUSY_POLL, &peer->napi.state);
-+	netif_napi_add(wg->dev, &peer->napi, wg_packet_rx_poll,
-+		       NAPI_POLL_WEIGHT);
-+	napi_enable(&peer->napi);
-+	list_add_tail(&peer->peer_list, &wg->peer_list);
-+	INIT_LIST_HEAD(&peer->allowedips_list);
-+	wg_pubkey_hashtable_add(wg->peer_hashtable, peer);
-+	++wg->num_peers;
-+	pr_debug("%s: Peer %llu created\n", wg->dev->name, peer->internal_id);
-+	return peer;
-+
-+err_3:
-+	wg_packet_queue_free(&peer->tx_queue, false);
-+err_2:
-+	dst_cache_destroy(&peer->endpoint_cache);
-+err_1:
-+	kfree(peer);
-+	return ERR_PTR(ret);
-+}
-+
-+struct wg_peer *wg_peer_get_maybe_zero(struct wg_peer *peer)
-+{
-+	RCU_LOCKDEP_WARN(!rcu_read_lock_bh_held(),
-+			 "Taking peer reference without holding the RCU read lock");
-+	if (unlikely(!peer || !kref_get_unless_zero(&peer->refcount)))
-+		return NULL;
-+	return peer;
-+}
-+
-+static void peer_make_dead(struct wg_peer *peer)
-+{
-+	/* Remove from configuration-time lookup structures. */
-+	list_del_init(&peer->peer_list);
-+	wg_allowedips_remove_by_peer(&peer->device->peer_allowedips, peer,
-+				     &peer->device->device_update_lock);
-+	wg_pubkey_hashtable_remove(peer->device->peer_hashtable, peer);
-+
-+	/* Mark as dead, so that we don't allow jumping contexts after. */
-+	WRITE_ONCE(peer->is_dead, true);
-+
-+	/* The caller must now synchronize_rcu() for this to take effect. */
-+}
-+
-+static void peer_remove_after_dead(struct wg_peer *peer)
-+{
-+	WARN_ON(!peer->is_dead);
-+
-+	/* No more keypairs can be created for this peer, since is_dead protects
-+	 * add_new_keypair, so we can now destroy existing ones.
-+	 */
-+	wg_noise_keypairs_clear(&peer->keypairs);
-+
-+	/* Destroy all ongoing timers that were in-flight at the beginning of
-+	 * this function.
-+	 */
-+	wg_timers_stop(peer);
-+
-+	/* The transition between packet encryption/decryption queues isn't
-+	 * guarded by is_dead, but each reference's life is strictly bounded by
-+	 * two generations: once for parallel crypto and once for serial
-+	 * ingestion, so we can simply flush twice, and be sure that we no
-+	 * longer have references inside these queues.
-+	 */
-+
-+	/* a) For encrypt/decrypt. */
-+	flush_workqueue(peer->device->packet_crypt_wq);
-+	/* b.1) For send (but not receive, since that's napi). */
-+	flush_workqueue(peer->device->packet_crypt_wq);
-+	/* b.2.1) For receive (but not send, since that's wq). */
-+	napi_disable(&peer->napi);
-+	/* b.2.1) It's now safe to remove the napi struct, which must be done
-+	 * here from process context.
-+	 */
-+	netif_napi_del(&peer->napi);
-+
-+	/* Ensure any workstructs we own (like transmit_handshake_work or
-+	 * clear_peer_work) no longer are in use.
-+	 */
-+	flush_workqueue(peer->device->handshake_send_wq);
-+
-+	/* After the above flushes, a peer might still be active in a few
-+	 * different contexts: 1) from xmit(), before hitting is_dead and
-+	 * returning, 2) from wg_packet_consume_data(), before hitting is_dead
-+	 * and returning, 3) from wg_receive_handshake_packet() after a point
-+	 * where it has processed an incoming handshake packet, but where
-+	 * all calls to pass it off to timers fails because of is_dead. We won't
-+	 * have new references in (1) eventually, because we're removed from
-+	 * allowedips; we won't have new references in (2) eventually, because
-+	 * wg_index_hashtable_lookup will always return NULL, since we removed
-+	 * all existing keypairs and no more can be created; we won't have new
-+	 * references in (3) eventually, because we're removed from the pubkey
-+	 * hash table, which allows for a maximum of one handshake response,
-+	 * via the still-uncleared index hashtable entry, but not more than one,
-+	 * and in wg_cookie_message_consume, the lookup eventually gets a peer
-+	 * with a refcount of zero, so no new reference is taken.
-+	 */
-+
-+	--peer->device->num_peers;
-+	wg_peer_put(peer);
-+}
-+
-+/* We have a separate "remove" function make sure that all active places where
-+ * a peer is currently operating will eventually come to an end and not pass
-+ * their reference onto another context.
-+ */
-+void wg_peer_remove(struct wg_peer *peer)
-+{
-+	if (unlikely(!peer))
-+		return;
-+	lockdep_assert_held(&peer->device->device_update_lock);
-+
-+	peer_make_dead(peer);
-+	synchronize_rcu();
-+	peer_remove_after_dead(peer);
-+}
-+
-+void wg_peer_remove_all(struct wg_device *wg)
-+{
-+	struct wg_peer *peer, *temp;
-+	LIST_HEAD(dead_peers);
-+
-+	lockdep_assert_held(&wg->device_update_lock);
-+
-+	/* Avoid having to traverse individually for each one. */
-+	wg_allowedips_free(&wg->peer_allowedips, &wg->device_update_lock);
-+
-+	list_for_each_entry_safe(peer, temp, &wg->peer_list, peer_list) {
-+		peer_make_dead(peer);
-+		list_add_tail(&peer->peer_list, &dead_peers);
-+	}
-+	synchronize_rcu();
-+	list_for_each_entry_safe(peer, temp, &dead_peers, peer_list)
-+		peer_remove_after_dead(peer);
-+}
-+
-+static void rcu_release(struct rcu_head *rcu)
-+{
-+	struct wg_peer *peer = container_of(rcu, struct wg_peer, rcu);
-+
-+	dst_cache_destroy(&peer->endpoint_cache);
-+	wg_packet_queue_free(&peer->rx_queue, false);
-+	wg_packet_queue_free(&peer->tx_queue, false);
-+
-+	/* The final zeroing takes care of clearing any remaining handshake key
-+	 * material and other potentially sensitive information.
-+	 */
-+	kzfree(peer);
-+}
-+
-+static void kref_release(struct kref *refcount)
-+{
-+	struct wg_peer *peer = container_of(refcount, struct wg_peer, refcount);
-+
-+	pr_debug("%s: Peer %llu (%pISpfsc) destroyed\n",
-+		 peer->device->dev->name, peer->internal_id,
-+		 &peer->endpoint.addr);
-+
-+	/* Remove ourself from dynamic runtime lookup structures, now that the
-+	 * last reference is gone.
-+	 */
-+	wg_index_hashtable_remove(peer->device->index_hashtable,
-+				  &peer->handshake.entry);
-+
-+	/* Remove any lingering packets that didn't have a chance to be
-+	 * transmitted.
-+	 */
-+	wg_packet_purge_staged_packets(peer);
-+
-+	/* Free the memory used. */
-+	call_rcu(&peer->rcu, rcu_release);
-+}
-+
-+void wg_peer_put(struct wg_peer *peer)
-+{
-+	if (unlikely(!peer))
-+		return;
-+	kref_put(&peer->refcount, kref_release);
-+}
---- /dev/null
-+++ b/drivers/net/wireguard/peer.h
-@@ -0,0 +1,83 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifndef _WG_PEER_H
-+#define _WG_PEER_H
-+
-+#include "device.h"
-+#include "noise.h"
-+#include "cookie.h"
-+
-+#include <linux/types.h>
-+#include <linux/netfilter.h>
-+#include <linux/spinlock.h>
-+#include <linux/kref.h>
-+#include <net/dst_cache.h>
-+
-+struct wg_device;
-+
-+struct endpoint {
-+	union {
-+		struct sockaddr addr;
-+		struct sockaddr_in addr4;
-+		struct sockaddr_in6 addr6;
-+	};
-+	union {
-+		struct {
-+			struct in_addr src4;
-+			/* Essentially the same as addr6->scope_id */
-+			int src_if4;
-+		};
-+		struct in6_addr src6;
-+	};
-+};
-+
-+struct wg_peer {
-+	struct wg_device *device;
-+	struct crypt_queue tx_queue, rx_queue;
-+	struct sk_buff_head staged_packet_queue;
-+	int serial_work_cpu;
-+	struct noise_keypairs keypairs;
-+	struct endpoint endpoint;
-+	struct dst_cache endpoint_cache;
-+	rwlock_t endpoint_lock;
-+	struct noise_handshake handshake;
-+	atomic64_t last_sent_handshake;
-+	struct work_struct transmit_handshake_work, clear_peer_work;
-+	struct cookie latest_cookie;
-+	struct hlist_node pubkey_hash;
-+	u64 rx_bytes, tx_bytes;
-+	struct timer_list timer_retransmit_handshake, timer_send_keepalive;
-+	struct timer_list timer_new_handshake, timer_zero_key_material;
-+	struct timer_list timer_persistent_keepalive;
-+	unsigned int timer_handshake_attempts;
-+	u16 persistent_keepalive_interval;
-+	bool timer_need_another_keepalive;
-+	bool sent_lastminute_handshake;
-+	struct timespec64 walltime_last_handshake;
-+	struct kref refcount;
-+	struct rcu_head rcu;
-+	struct list_head peer_list;
-+	struct list_head allowedips_list;
-+	u64 internal_id;
-+	struct napi_struct napi;
-+	bool is_dead;
-+};
-+
-+struct wg_peer *wg_peer_create(struct wg_device *wg,
-+			       const u8 public_key[NOISE_PUBLIC_KEY_LEN],
-+			       const u8 preshared_key[NOISE_SYMMETRIC_KEY_LEN]);
-+
-+struct wg_peer *__must_check wg_peer_get_maybe_zero(struct wg_peer *peer);
-+static inline struct wg_peer *wg_peer_get(struct wg_peer *peer)
-+{
-+	kref_get(&peer->refcount);
-+	return peer;
-+}
-+void wg_peer_put(struct wg_peer *peer);
-+void wg_peer_remove(struct wg_peer *peer);
-+void wg_peer_remove_all(struct wg_device *wg);
-+
-+#endif /* _WG_PEER_H */
---- /dev/null
-+++ b/drivers/net/wireguard/peerlookup.c
-@@ -0,0 +1,221 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include "peerlookup.h"
-+#include "peer.h"
-+#include "noise.h"
-+
-+static struct hlist_head *pubkey_bucket(struct pubkey_hashtable *table,
-+					const u8 pubkey[NOISE_PUBLIC_KEY_LEN])
-+{
-+	/* siphash gives us a secure 64bit number based on a random key. Since
-+	 * the bits are uniformly distributed, we can then mask off to get the
-+	 * bits we need.
-+	 */
-+	const u64 hash = siphash(pubkey, NOISE_PUBLIC_KEY_LEN, &table->key);
-+
-+	return &table->hashtable[hash & (HASH_SIZE(table->hashtable) - 1)];
-+}
-+
-+struct pubkey_hashtable *wg_pubkey_hashtable_alloc(void)
-+{
-+	struct pubkey_hashtable *table = kvmalloc(sizeof(*table), GFP_KERNEL);
-+
-+	if (!table)
-+		return NULL;
-+
-+	get_random_bytes(&table->key, sizeof(table->key));
-+	hash_init(table->hashtable);
-+	mutex_init(&table->lock);
-+	return table;
-+}
-+
-+void wg_pubkey_hashtable_add(struct pubkey_hashtable *table,
-+			     struct wg_peer *peer)
-+{
-+	mutex_lock(&table->lock);
-+	hlist_add_head_rcu(&peer->pubkey_hash,
-+			   pubkey_bucket(table, peer->handshake.remote_static));
-+	mutex_unlock(&table->lock);
-+}
-+
-+void wg_pubkey_hashtable_remove(struct pubkey_hashtable *table,
-+				struct wg_peer *peer)
-+{
-+	mutex_lock(&table->lock);
-+	hlist_del_init_rcu(&peer->pubkey_hash);
-+	mutex_unlock(&table->lock);
-+}
-+
-+/* Returns a strong reference to a peer */
-+struct wg_peer *
-+wg_pubkey_hashtable_lookup(struct pubkey_hashtable *table,
-+			   const u8 pubkey[NOISE_PUBLIC_KEY_LEN])
-+{
-+	struct wg_peer *iter_peer, *peer = NULL;
-+
-+	rcu_read_lock_bh();
-+	hlist_for_each_entry_rcu_bh(iter_peer, pubkey_bucket(table, pubkey),
-+				    pubkey_hash) {
-+		if (!memcmp(pubkey, iter_peer->handshake.remote_static,
-+			    NOISE_PUBLIC_KEY_LEN)) {
-+			peer = iter_peer;
-+			break;
-+		}
-+	}
-+	peer = wg_peer_get_maybe_zero(peer);
-+	rcu_read_unlock_bh();
-+	return peer;
-+}
-+
-+static struct hlist_head *index_bucket(struct index_hashtable *table,
-+				       const __le32 index)
-+{
-+	/* Since the indices are random and thus all bits are uniformly
-+	 * distributed, we can find its bucket simply by masking.
-+	 */
-+	return &table->hashtable[(__force u32)index &
-+				 (HASH_SIZE(table->hashtable) - 1)];
-+}
-+
-+struct index_hashtable *wg_index_hashtable_alloc(void)
-+{
-+	struct index_hashtable *table = kvmalloc(sizeof(*table), GFP_KERNEL);
-+
-+	if (!table)
-+		return NULL;
-+
-+	hash_init(table->hashtable);
-+	spin_lock_init(&table->lock);
-+	return table;
-+}
-+
-+/* At the moment, we limit ourselves to 2^20 total peers, which generally might
-+ * amount to 2^20*3 items in this hashtable. The algorithm below works by
-+ * picking a random number and testing it. We can see that these limits mean we
-+ * usually succeed pretty quickly:
-+ *
-+ * >>> def calculation(tries, size):
-+ * ...     return (size / 2**32)**(tries - 1) *  (1 - (size / 2**32))
-+ * ...
-+ * >>> calculation(1, 2**20 * 3)
-+ * 0.999267578125
-+ * >>> calculation(2, 2**20 * 3)
-+ * 0.0007318854331970215
-+ * >>> calculation(3, 2**20 * 3)
-+ * 5.360489012673497e-07
-+ * >>> calculation(4, 2**20 * 3)
-+ * 3.9261394135792216e-10
-+ *
-+ * At the moment, we don't do any masking, so this algorithm isn't exactly
-+ * constant time in either the random guessing or in the hash list lookup. We
-+ * could require a minimum of 3 tries, which would successfully mask the
-+ * guessing. this would not, however, help with the growing hash lengths, which
-+ * is another thing to consider moving forward.
-+ */
-+
-+__le32 wg_index_hashtable_insert(struct index_hashtable *table,
-+				 struct index_hashtable_entry *entry)
-+{
-+	struct index_hashtable_entry *existing_entry;
-+
-+	spin_lock_bh(&table->lock);
-+	hlist_del_init_rcu(&entry->index_hash);
-+	spin_unlock_bh(&table->lock);
-+
-+	rcu_read_lock_bh();
-+
-+search_unused_slot:
-+	/* First we try to find an unused slot, randomly, while unlocked. */
-+	entry->index = (__force __le32)get_random_u32();
-+	hlist_for_each_entry_rcu_bh(existing_entry,
-+				    index_bucket(table, entry->index),
-+				    index_hash) {
-+		if (existing_entry->index == entry->index)
-+			/* If it's already in use, we continue searching. */
-+			goto search_unused_slot;
-+	}
-+
-+	/* Once we've found an unused slot, we lock it, and then double-check
-+	 * that nobody else stole it from us.
-+	 */
-+	spin_lock_bh(&table->lock);
-+	hlist_for_each_entry_rcu_bh(existing_entry,
-+				    index_bucket(table, entry->index),
-+				    index_hash) {
-+		if (existing_entry->index == entry->index) {
-+			spin_unlock_bh(&table->lock);
-+			/* If it was stolen, we start over. */
-+			goto search_unused_slot;
-+		}
-+	}
-+	/* Otherwise, we know we have it exclusively (since we're locked),
-+	 * so we insert.
-+	 */
-+	hlist_add_head_rcu(&entry->index_hash,
-+			   index_bucket(table, entry->index));
-+	spin_unlock_bh(&table->lock);
-+
-+	rcu_read_unlock_bh();
-+
-+	return entry->index;
-+}
-+
-+bool wg_index_hashtable_replace(struct index_hashtable *table,
-+				struct index_hashtable_entry *old,
-+				struct index_hashtable_entry *new)
-+{
-+	if (unlikely(hlist_unhashed(&old->index_hash)))
-+		return false;
-+	spin_lock_bh(&table->lock);
-+	new->index = old->index;
-+	hlist_replace_rcu(&old->index_hash, &new->index_hash);
-+
-+	/* Calling init here NULLs out index_hash, and in fact after this
-+	 * function returns, it's theoretically possible for this to get
-+	 * reinserted elsewhere. That means the RCU lookup below might either
-+	 * terminate early or jump between buckets, in which case the packet
-+	 * simply gets dropped, which isn't terrible.
-+	 */
-+	INIT_HLIST_NODE(&old->index_hash);
-+	spin_unlock_bh(&table->lock);
-+	return true;
-+}
-+
-+void wg_index_hashtable_remove(struct index_hashtable *table,
-+			       struct index_hashtable_entry *entry)
-+{
-+	spin_lock_bh(&table->lock);
-+	hlist_del_init_rcu(&entry->index_hash);
-+	spin_unlock_bh(&table->lock);
-+}
-+
-+/* Returns a strong reference to a entry->peer */
-+struct index_hashtable_entry *
-+wg_index_hashtable_lookup(struct index_hashtable *table,
-+			  const enum index_hashtable_type type_mask,
-+			  const __le32 index, struct wg_peer **peer)
-+{
-+	struct index_hashtable_entry *iter_entry, *entry = NULL;
-+
-+	rcu_read_lock_bh();
-+	hlist_for_each_entry_rcu_bh(iter_entry, index_bucket(table, index),
-+				    index_hash) {
-+		if (iter_entry->index == index) {
-+			if (likely(iter_entry->type & type_mask))
-+				entry = iter_entry;
-+			break;
-+		}
-+	}
-+	if (likely(entry)) {
-+		entry->peer = wg_peer_get_maybe_zero(entry->peer);
-+		if (likely(entry->peer))
-+			*peer = entry->peer;
-+		else
-+			entry = NULL;
-+	}
-+	rcu_read_unlock_bh();
-+	return entry;
-+}
---- /dev/null
-+++ b/drivers/net/wireguard/peerlookup.h
-@@ -0,0 +1,64 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifndef _WG_PEERLOOKUP_H
-+#define _WG_PEERLOOKUP_H
-+
-+#include "messages.h"
-+
-+#include <linux/hashtable.h>
-+#include <linux/mutex.h>
-+#include <linux/siphash.h>
-+
-+struct wg_peer;
-+
-+struct pubkey_hashtable {
-+	/* TODO: move to rhashtable */
-+	DECLARE_HASHTABLE(hashtable, 11);
-+	siphash_key_t key;
-+	struct mutex lock;
-+};
-+
-+struct pubkey_hashtable *wg_pubkey_hashtable_alloc(void);
-+void wg_pubkey_hashtable_add(struct pubkey_hashtable *table,
-+			     struct wg_peer *peer);
-+void wg_pubkey_hashtable_remove(struct pubkey_hashtable *table,
-+				struct wg_peer *peer);
-+struct wg_peer *
-+wg_pubkey_hashtable_lookup(struct pubkey_hashtable *table,
-+			   const u8 pubkey[NOISE_PUBLIC_KEY_LEN]);
-+
-+struct index_hashtable {
-+	/* TODO: move to rhashtable */
-+	DECLARE_HASHTABLE(hashtable, 13);
-+	spinlock_t lock;
-+};
-+
-+enum index_hashtable_type {
-+	INDEX_HASHTABLE_HANDSHAKE = 1U << 0,
-+	INDEX_HASHTABLE_KEYPAIR = 1U << 1
-+};
-+
-+struct index_hashtable_entry {
-+	struct wg_peer *peer;
-+	struct hlist_node index_hash;
-+	enum index_hashtable_type type;
-+	__le32 index;
-+};
-+
-+struct index_hashtable *wg_index_hashtable_alloc(void);
-+__le32 wg_index_hashtable_insert(struct index_hashtable *table,
-+				 struct index_hashtable_entry *entry);
-+bool wg_index_hashtable_replace(struct index_hashtable *table,
-+				struct index_hashtable_entry *old,
-+				struct index_hashtable_entry *new);
-+void wg_index_hashtable_remove(struct index_hashtable *table,
-+			       struct index_hashtable_entry *entry);
-+struct index_hashtable_entry *
-+wg_index_hashtable_lookup(struct index_hashtable *table,
-+			  const enum index_hashtable_type type_mask,
-+			  const __le32 index, struct wg_peer **peer);
-+
-+#endif /* _WG_PEERLOOKUP_H */
---- /dev/null
-+++ b/drivers/net/wireguard/queueing.c
-@@ -0,0 +1,53 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include "queueing.h"
-+
-+struct multicore_worker __percpu *
-+wg_packet_percpu_multicore_worker_alloc(work_func_t function, void *ptr)
-+{
-+	int cpu;
-+	struct multicore_worker __percpu *worker =
-+		alloc_percpu(struct multicore_worker);
-+
-+	if (!worker)
-+		return NULL;
-+
-+	for_each_possible_cpu(cpu) {
-+		per_cpu_ptr(worker, cpu)->ptr = ptr;
-+		INIT_WORK(&per_cpu_ptr(worker, cpu)->work, function);
-+	}
-+	return worker;
-+}
-+
-+int wg_packet_queue_init(struct crypt_queue *queue, work_func_t function,
-+			 bool multicore, unsigned int len)
-+{
-+	int ret;
-+
-+	memset(queue, 0, sizeof(*queue));
-+	ret = ptr_ring_init(&queue->ring, len, GFP_KERNEL);
-+	if (ret)
-+		return ret;
-+	if (function) {
-+		if (multicore) {
-+			queue->worker = wg_packet_percpu_multicore_worker_alloc(
-+				function, queue);
-+			if (!queue->worker)
-+				return -ENOMEM;
-+		} else {
-+			INIT_WORK(&queue->work, function);
-+		}
-+	}
-+	return 0;
-+}
-+
-+void wg_packet_queue_free(struct crypt_queue *queue, bool multicore)
-+{
-+	if (multicore)
-+		free_percpu(queue->worker);
-+	WARN_ON(!__ptr_ring_empty(&queue->ring));
-+	ptr_ring_cleanup(&queue->ring, NULL);
-+}
---- /dev/null
-+++ b/drivers/net/wireguard/queueing.h
-@@ -0,0 +1,197 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifndef _WG_QUEUEING_H
-+#define _WG_QUEUEING_H
-+
-+#include "peer.h"
-+#include <linux/types.h>
-+#include <linux/skbuff.h>
-+#include <linux/ip.h>
-+#include <linux/ipv6.h>
-+
-+struct wg_device;
-+struct wg_peer;
-+struct multicore_worker;
-+struct crypt_queue;
-+struct sk_buff;
-+
-+/* queueing.c APIs: */
-+int wg_packet_queue_init(struct crypt_queue *queue, work_func_t function,
-+			 bool multicore, unsigned int len);
-+void wg_packet_queue_free(struct crypt_queue *queue, bool multicore);
-+struct multicore_worker __percpu *
-+wg_packet_percpu_multicore_worker_alloc(work_func_t function, void *ptr);
-+
-+/* receive.c APIs: */
-+void wg_packet_receive(struct wg_device *wg, struct sk_buff *skb);
-+void wg_packet_handshake_receive_worker(struct work_struct *work);
-+/* NAPI poll function: */
-+int wg_packet_rx_poll(struct napi_struct *napi, int budget);
-+/* Workqueue worker: */
-+void wg_packet_decrypt_worker(struct work_struct *work);
-+
-+/* send.c APIs: */
-+void wg_packet_send_queued_handshake_initiation(struct wg_peer *peer,
-+						bool is_retry);
-+void wg_packet_send_handshake_response(struct wg_peer *peer);
-+void wg_packet_send_handshake_cookie(struct wg_device *wg,
-+				     struct sk_buff *initiating_skb,
-+				     __le32 sender_index);
-+void wg_packet_send_keepalive(struct wg_peer *peer);
-+void wg_packet_purge_staged_packets(struct wg_peer *peer);
-+void wg_packet_send_staged_packets(struct wg_peer *peer);
-+/* Workqueue workers: */
-+void wg_packet_handshake_send_worker(struct work_struct *work);
-+void wg_packet_tx_worker(struct work_struct *work);
-+void wg_packet_encrypt_worker(struct work_struct *work);
-+
-+enum packet_state {
-+	PACKET_STATE_UNCRYPTED,
-+	PACKET_STATE_CRYPTED,
-+	PACKET_STATE_DEAD
-+};
-+
-+struct packet_cb {
-+	u64 nonce;
-+	struct noise_keypair *keypair;
-+	atomic_t state;
-+	u32 mtu;
-+	u8 ds;
-+};
-+
-+#define PACKET_CB(skb) ((struct packet_cb *)((skb)->cb))
-+#define PACKET_PEER(skb) (PACKET_CB(skb)->keypair->entry.peer)
-+
-+/* Returns either the correct skb->protocol value, or 0 if invalid. */
-+static inline __be16 wg_skb_examine_untrusted_ip_hdr(struct sk_buff *skb)
-+{
-+	if (skb_network_header(skb) >= skb->head &&
-+	    (skb_network_header(skb) + sizeof(struct iphdr)) <=
-+		    skb_tail_pointer(skb) &&
-+	    ip_hdr(skb)->version == 4)
-+		return htons(ETH_P_IP);
-+	if (skb_network_header(skb) >= skb->head &&
-+	    (skb_network_header(skb) + sizeof(struct ipv6hdr)) <=
-+		    skb_tail_pointer(skb) &&
-+	    ipv6_hdr(skb)->version == 6)
-+		return htons(ETH_P_IPV6);
-+	return 0;
-+}
-+
-+static inline void wg_reset_packet(struct sk_buff *skb)
-+{
-+	const int pfmemalloc = skb->pfmemalloc;
-+
-+	skb_scrub_packet(skb, true);
-+	memset(&skb->headers_start, 0,
-+	       offsetof(struct sk_buff, headers_end) -
-+		       offsetof(struct sk_buff, headers_start));
-+	skb->pfmemalloc = pfmemalloc;
-+	skb->queue_mapping = 0;
-+	skb->nohdr = 0;
-+	skb->peeked = 0;
-+	skb->mac_len = 0;
-+	skb->dev = NULL;
-+#ifdef CONFIG_NET_SCHED
-+	skb->tc_index = 0;
-+#endif
-+	skb_reset_redirect(skb);
-+	skb->hdr_len = skb_headroom(skb);
-+	skb_reset_mac_header(skb);
-+	skb_reset_network_header(skb);
-+	skb_reset_transport_header(skb);
-+	skb_probe_transport_header(skb);
-+	skb_reset_inner_headers(skb);
-+}
-+
-+static inline int wg_cpumask_choose_online(int *stored_cpu, unsigned int id)
-+{
-+	unsigned int cpu = *stored_cpu, cpu_index, i;
-+
-+	if (unlikely(cpu == nr_cpumask_bits ||
-+		     !cpumask_test_cpu(cpu, cpu_online_mask))) {
-+		cpu_index = id % cpumask_weight(cpu_online_mask);
-+		cpu = cpumask_first(cpu_online_mask);
-+		for (i = 0; i < cpu_index; ++i)
-+			cpu = cpumask_next(cpu, cpu_online_mask);
-+		*stored_cpu = cpu;
-+	}
-+	return cpu;
-+}
-+
-+/* This function is racy, in the sense that next is unlocked, so it could return
-+ * the same CPU twice. A race-free version of this would be to instead store an
-+ * atomic sequence number, do an increment-and-return, and then iterate through
-+ * every possible CPU until we get to that index -- choose_cpu. However that's
-+ * a bit slower, and it doesn't seem like this potential race actually
-+ * introduces any performance loss, so we live with it.
-+ */
-+static inline int wg_cpumask_next_online(int *next)
-+{
-+	int cpu = *next;
-+
-+	while (unlikely(!cpumask_test_cpu(cpu, cpu_online_mask)))
-+		cpu = cpumask_next(cpu, cpu_online_mask) % nr_cpumask_bits;
-+	*next = cpumask_next(cpu, cpu_online_mask) % nr_cpumask_bits;
-+	return cpu;
-+}
-+
-+static inline int wg_queue_enqueue_per_device_and_peer(
-+	struct crypt_queue *device_queue, struct crypt_queue *peer_queue,
-+	struct sk_buff *skb, struct workqueue_struct *wq, int *next_cpu)
-+{
-+	int cpu;
-+
-+	atomic_set_release(&PACKET_CB(skb)->state, PACKET_STATE_UNCRYPTED);
-+	/* We first queue this up for the peer ingestion, but the consumer
-+	 * will wait for the state to change to CRYPTED or DEAD before.
-+	 */
-+	if (unlikely(ptr_ring_produce_bh(&peer_queue->ring, skb)))
-+		return -ENOSPC;
-+	/* Then we queue it up in the device queue, which consumes the
-+	 * packet as soon as it can.
-+	 */
-+	cpu = wg_cpumask_next_online(next_cpu);
-+	if (unlikely(ptr_ring_produce_bh(&device_queue->ring, skb)))
-+		return -EPIPE;
-+	queue_work_on(cpu, wq, &per_cpu_ptr(device_queue->worker, cpu)->work);
-+	return 0;
-+}
-+
-+static inline void wg_queue_enqueue_per_peer(struct crypt_queue *queue,
-+					     struct sk_buff *skb,
-+					     enum packet_state state)
-+{
-+	/* We take a reference, because as soon as we call atomic_set, the
-+	 * peer can be freed from below us.
-+	 */
-+	struct wg_peer *peer = wg_peer_get(PACKET_PEER(skb));
-+
-+	atomic_set_release(&PACKET_CB(skb)->state, state);
-+	queue_work_on(wg_cpumask_choose_online(&peer->serial_work_cpu,
-+					       peer->internal_id),
-+		      peer->device->packet_crypt_wq, &queue->work);
-+	wg_peer_put(peer);
-+}
-+
-+static inline void wg_queue_enqueue_per_peer_napi(struct sk_buff *skb,
-+						  enum packet_state state)
-+{
-+	/* We take a reference, because as soon as we call atomic_set, the
-+	 * peer can be freed from below us.
-+	 */
-+	struct wg_peer *peer = wg_peer_get(PACKET_PEER(skb));
-+
-+	atomic_set_release(&PACKET_CB(skb)->state, state);
-+	napi_schedule(&peer->napi);
-+	wg_peer_put(peer);
-+}
-+
-+#ifdef DEBUG
-+bool wg_packet_counter_selftest(void);
-+#endif
-+
-+#endif /* _WG_QUEUEING_H */
---- /dev/null
-+++ b/drivers/net/wireguard/ratelimiter.c
-@@ -0,0 +1,223 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include "ratelimiter.h"
-+#include <linux/siphash.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <net/ip.h>
-+
-+static struct kmem_cache *entry_cache;
-+static hsiphash_key_t key;
-+static spinlock_t table_lock = __SPIN_LOCK_UNLOCKED("ratelimiter_table_lock");
-+static DEFINE_MUTEX(init_lock);
-+static u64 init_refcnt; /* Protected by init_lock, hence not atomic. */
-+static atomic_t total_entries = ATOMIC_INIT(0);
-+static unsigned int max_entries, table_size;
-+static void wg_ratelimiter_gc_entries(struct work_struct *);
-+static DECLARE_DEFERRABLE_WORK(gc_work, wg_ratelimiter_gc_entries);
-+static struct hlist_head *table_v4;
-+#if IS_ENABLED(CONFIG_IPV6)
-+static struct hlist_head *table_v6;
-+#endif
-+
-+struct ratelimiter_entry {
-+	u64 last_time_ns, tokens, ip;
-+	void *net;
-+	spinlock_t lock;
-+	struct hlist_node hash;
-+	struct rcu_head rcu;
-+};
-+
-+enum {
-+	PACKETS_PER_SECOND = 20,
-+	PACKETS_BURSTABLE = 5,
-+	PACKET_COST = NSEC_PER_SEC / PACKETS_PER_SECOND,
-+	TOKEN_MAX = PACKET_COST * PACKETS_BURSTABLE
-+};
-+
-+static void entry_free(struct rcu_head *rcu)
-+{
-+	kmem_cache_free(entry_cache,
-+			container_of(rcu, struct ratelimiter_entry, rcu));
-+	atomic_dec(&total_entries);
-+}
-+
-+static void entry_uninit(struct ratelimiter_entry *entry)
-+{
-+	hlist_del_rcu(&entry->hash);
-+	call_rcu(&entry->rcu, entry_free);
-+}
-+
-+/* Calling this function with a NULL work uninits all entries. */
-+static void wg_ratelimiter_gc_entries(struct work_struct *work)
-+{
-+	const u64 now = ktime_get_coarse_boottime_ns();
-+	struct ratelimiter_entry *entry;
-+	struct hlist_node *temp;
-+	unsigned int i;
-+
-+	for (i = 0; i < table_size; ++i) {
-+		spin_lock(&table_lock);
-+		hlist_for_each_entry_safe(entry, temp, &table_v4[i], hash) {
-+			if (unlikely(!work) ||
-+			    now - entry->last_time_ns > NSEC_PER_SEC)
-+				entry_uninit(entry);
-+		}
-+#if IS_ENABLED(CONFIG_IPV6)
-+		hlist_for_each_entry_safe(entry, temp, &table_v6[i], hash) {
-+			if (unlikely(!work) ||
-+			    now - entry->last_time_ns > NSEC_PER_SEC)
-+				entry_uninit(entry);
-+		}
-+#endif
-+		spin_unlock(&table_lock);
-+		if (likely(work))
-+			cond_resched();
-+	}
-+	if (likely(work))
-+		queue_delayed_work(system_power_efficient_wq, &gc_work, HZ);
-+}
-+
-+bool wg_ratelimiter_allow(struct sk_buff *skb, struct net *net)
-+{
-+	/* We only take the bottom half of the net pointer, so that we can hash
-+	 * 3 words in the end. This way, siphash's len param fits into the final
-+	 * u32, and we don't incur an extra round.
-+	 */
-+	const u32 net_word = (unsigned long)net;
-+	struct ratelimiter_entry *entry;
-+	struct hlist_head *bucket;
-+	u64 ip;
-+
-+	if (skb->protocol == htons(ETH_P_IP)) {
-+		ip = (u64 __force)ip_hdr(skb)->saddr;
-+		bucket = &table_v4[hsiphash_2u32(net_word, ip, &key) &
-+				   (table_size - 1)];
-+	}
-+#if IS_ENABLED(CONFIG_IPV6)
-+	else if (skb->protocol == htons(ETH_P_IPV6)) {
-+		/* Only use 64 bits, so as to ratelimit the whole /64. */
-+		memcpy(&ip, &ipv6_hdr(skb)->saddr, sizeof(ip));
-+		bucket = &table_v6[hsiphash_3u32(net_word, ip >> 32, ip, &key) &
-+				   (table_size - 1)];
-+	}
-+#endif
-+	else
-+		return false;
-+	rcu_read_lock();
-+	hlist_for_each_entry_rcu(entry, bucket, hash) {
-+		if (entry->net == net && entry->ip == ip) {
-+			u64 now, tokens;
-+			bool ret;
-+			/* Quasi-inspired by nft_limit.c, but this is actually a
-+			 * slightly different algorithm. Namely, we incorporate
-+			 * the burst as part of the maximum tokens, rather than
-+			 * as part of the rate.
-+			 */
-+			spin_lock(&entry->lock);
-+			now = ktime_get_coarse_boottime_ns();
-+			tokens = min_t(u64, TOKEN_MAX,
-+				       entry->tokens + now -
-+					       entry->last_time_ns);
-+			entry->last_time_ns = now;
-+			ret = tokens >= PACKET_COST;
-+			entry->tokens = ret ? tokens - PACKET_COST : tokens;
-+			spin_unlock(&entry->lock);
-+			rcu_read_unlock();
-+			return ret;
-+		}
-+	}
-+	rcu_read_unlock();
-+
-+	if (atomic_inc_return(&total_entries) > max_entries)
-+		goto err_oom;
-+
-+	entry = kmem_cache_alloc(entry_cache, GFP_KERNEL);
-+	if (unlikely(!entry))
-+		goto err_oom;
-+
-+	entry->net = net;
-+	entry->ip = ip;
-+	INIT_HLIST_NODE(&entry->hash);
-+	spin_lock_init(&entry->lock);
-+	entry->last_time_ns = ktime_get_coarse_boottime_ns();
-+	entry->tokens = TOKEN_MAX - PACKET_COST;
-+	spin_lock(&table_lock);
-+	hlist_add_head_rcu(&entry->hash, bucket);
-+	spin_unlock(&table_lock);
-+	return true;
-+
-+err_oom:
-+	atomic_dec(&total_entries);
-+	return false;
-+}
-+
-+int wg_ratelimiter_init(void)
-+{
-+	mutex_lock(&init_lock);
-+	if (++init_refcnt != 1)
-+		goto out;
-+
-+	entry_cache = KMEM_CACHE(ratelimiter_entry, 0);
-+	if (!entry_cache)
-+		goto err;
-+
-+	/* xt_hashlimit.c uses a slightly different algorithm for ratelimiting,
-+	 * but what it shares in common is that it uses a massive hashtable. So,
-+	 * we borrow their wisdom about good table sizes on different systems
-+	 * dependent on RAM. This calculation here comes from there.
-+	 */
-+	table_size = (totalram_pages() > (1U << 30) / PAGE_SIZE) ? 8192 :
-+		max_t(unsigned long, 16, roundup_pow_of_two(
-+			(totalram_pages() << PAGE_SHIFT) /
-+			(1U << 14) / sizeof(struct hlist_head)));
-+	max_entries = table_size * 8;
-+
-+	table_v4 = kvzalloc(table_size * sizeof(*table_v4), GFP_KERNEL);
-+	if (unlikely(!table_v4))
-+		goto err_kmemcache;
-+
-+#if IS_ENABLED(CONFIG_IPV6)
-+	table_v6 = kvzalloc(table_size * sizeof(*table_v6), GFP_KERNEL);
-+	if (unlikely(!table_v6)) {
-+		kvfree(table_v4);
-+		goto err_kmemcache;
-+	}
-+#endif
-+
-+	queue_delayed_work(system_power_efficient_wq, &gc_work, HZ);
-+	get_random_bytes(&key, sizeof(key));
-+out:
-+	mutex_unlock(&init_lock);
-+	return 0;
-+
-+err_kmemcache:
-+	kmem_cache_destroy(entry_cache);
-+err:
-+	--init_refcnt;
-+	mutex_unlock(&init_lock);
-+	return -ENOMEM;
-+}
-+
-+void wg_ratelimiter_uninit(void)
-+{
-+	mutex_lock(&init_lock);
-+	if (!init_refcnt || --init_refcnt)
-+		goto out;
-+
-+	cancel_delayed_work_sync(&gc_work);
-+	wg_ratelimiter_gc_entries(NULL);
-+	rcu_barrier();
-+	kvfree(table_v4);
-+#if IS_ENABLED(CONFIG_IPV6)
-+	kvfree(table_v6);
-+#endif
-+	kmem_cache_destroy(entry_cache);
-+out:
-+	mutex_unlock(&init_lock);
-+}
-+
-+#include "selftest/ratelimiter.c"
---- /dev/null
-+++ b/drivers/net/wireguard/ratelimiter.h
-@@ -0,0 +1,19 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifndef _WG_RATELIMITER_H
-+#define _WG_RATELIMITER_H
-+
-+#include <linux/skbuff.h>
-+
-+int wg_ratelimiter_init(void);
-+void wg_ratelimiter_uninit(void);
-+bool wg_ratelimiter_allow(struct sk_buff *skb, struct net *net);
-+
-+#ifdef DEBUG
-+bool wg_ratelimiter_selftest(void);
-+#endif
-+
-+#endif /* _WG_RATELIMITER_H */
---- /dev/null
-+++ b/drivers/net/wireguard/receive.c
-@@ -0,0 +1,595 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include "queueing.h"
-+#include "device.h"
-+#include "peer.h"
-+#include "timers.h"
-+#include "messages.h"
-+#include "cookie.h"
-+#include "socket.h"
-+
-+#include <linux/ip.h>
-+#include <linux/ipv6.h>
-+#include <linux/udp.h>
-+#include <net/ip_tunnels.h>
-+
-+/* Must be called with bh disabled. */
-+static void update_rx_stats(struct wg_peer *peer, size_t len)
-+{
-+	struct pcpu_sw_netstats *tstats =
-+		get_cpu_ptr(peer->device->dev->tstats);
-+
-+	u64_stats_update_begin(&tstats->syncp);
-+	++tstats->rx_packets;
-+	tstats->rx_bytes += len;
-+	peer->rx_bytes += len;
-+	u64_stats_update_end(&tstats->syncp);
-+	put_cpu_ptr(tstats);
-+}
-+
-+#define SKB_TYPE_LE32(skb) (((struct message_header *)(skb)->data)->type)
-+
-+static size_t validate_header_len(struct sk_buff *skb)
-+{
-+	if (unlikely(skb->len < sizeof(struct message_header)))
-+		return 0;
-+	if (SKB_TYPE_LE32(skb) == cpu_to_le32(MESSAGE_DATA) &&
-+	    skb->len >= MESSAGE_MINIMUM_LENGTH)
-+		return sizeof(struct message_data);
-+	if (SKB_TYPE_LE32(skb) == cpu_to_le32(MESSAGE_HANDSHAKE_INITIATION) &&
-+	    skb->len == sizeof(struct message_handshake_initiation))
-+		return sizeof(struct message_handshake_initiation);
-+	if (SKB_TYPE_LE32(skb) == cpu_to_le32(MESSAGE_HANDSHAKE_RESPONSE) &&
-+	    skb->len == sizeof(struct message_handshake_response))
-+		return sizeof(struct message_handshake_response);
-+	if (SKB_TYPE_LE32(skb) == cpu_to_le32(MESSAGE_HANDSHAKE_COOKIE) &&
-+	    skb->len == sizeof(struct message_handshake_cookie))
-+		return sizeof(struct message_handshake_cookie);
-+	return 0;
-+}
-+
-+static int prepare_skb_header(struct sk_buff *skb, struct wg_device *wg)
-+{
-+	size_t data_offset, data_len, header_len;
-+	struct udphdr *udp;
-+
-+	if (unlikely(wg_skb_examine_untrusted_ip_hdr(skb) != skb->protocol ||
-+		     skb_transport_header(skb) < skb->head ||
-+		     (skb_transport_header(skb) + sizeof(struct udphdr)) >
-+			     skb_tail_pointer(skb)))
-+		return -EINVAL; /* Bogus IP header */
-+	udp = udp_hdr(skb);
-+	data_offset = (u8 *)udp - skb->data;
-+	if (unlikely(data_offset > U16_MAX ||
-+		     data_offset + sizeof(struct udphdr) > skb->len))
-+		/* Packet has offset at impossible location or isn't big enough
-+		 * to have UDP fields.
-+		 */
-+		return -EINVAL;
-+	data_len = ntohs(udp->len);
-+	if (unlikely(data_len < sizeof(struct udphdr) ||
-+		     data_len > skb->len - data_offset))
-+		/* UDP packet is reporting too small of a size or lying about
-+		 * its size.
-+		 */
-+		return -EINVAL;
-+	data_len -= sizeof(struct udphdr);
-+	data_offset = (u8 *)udp + sizeof(struct udphdr) - skb->data;
-+	if (unlikely(!pskb_may_pull(skb,
-+				data_offset + sizeof(struct message_header)) ||
-+		     pskb_trim(skb, data_len + data_offset) < 0))
-+		return -EINVAL;
-+	skb_pull(skb, data_offset);
-+	if (unlikely(skb->len != data_len))
-+		/* Final len does not agree with calculated len */
-+		return -EINVAL;
-+	header_len = validate_header_len(skb);
-+	if (unlikely(!header_len))
-+		return -EINVAL;
-+	__skb_push(skb, data_offset);
-+	if (unlikely(!pskb_may_pull(skb, data_offset + header_len)))
-+		return -EINVAL;
-+	__skb_pull(skb, data_offset);
-+	return 0;
-+}
-+
-+static void wg_receive_handshake_packet(struct wg_device *wg,
-+					struct sk_buff *skb)
-+{
-+	enum cookie_mac_state mac_state;
-+	struct wg_peer *peer = NULL;
-+	/* This is global, so that our load calculation applies to the whole
-+	 * system. We don't care about races with it at all.
-+	 */
-+	static u64 last_under_load;
-+	bool packet_needs_cookie;
-+	bool under_load;
-+
-+	if (SKB_TYPE_LE32(skb) == cpu_to_le32(MESSAGE_HANDSHAKE_COOKIE)) {
-+		net_dbg_skb_ratelimited("%s: Receiving cookie response from %pISpfsc\n",
-+					wg->dev->name, skb);
-+		wg_cookie_message_consume(
-+			(struct message_handshake_cookie *)skb->data, wg);
-+		return;
-+	}
-+
-+	under_load = skb_queue_len(&wg->incoming_handshakes) >=
-+		     MAX_QUEUED_INCOMING_HANDSHAKES / 8;
-+	if (under_load)
-+		last_under_load = ktime_get_coarse_boottime_ns();
-+	else if (last_under_load)
-+		under_load = !wg_birthdate_has_expired(last_under_load, 1);
-+	mac_state = wg_cookie_validate_packet(&wg->cookie_checker, skb,
-+					      under_load);
-+	if ((under_load && mac_state == VALID_MAC_WITH_COOKIE) ||
-+	    (!under_load && mac_state == VALID_MAC_BUT_NO_COOKIE)) {
-+		packet_needs_cookie = false;
-+	} else if (under_load && mac_state == VALID_MAC_BUT_NO_COOKIE) {
-+		packet_needs_cookie = true;
-+	} else {
-+		net_dbg_skb_ratelimited("%s: Invalid MAC of handshake, dropping packet from %pISpfsc\n",
-+					wg->dev->name, skb);
-+		return;
-+	}
-+
-+	switch (SKB_TYPE_LE32(skb)) {
-+	case cpu_to_le32(MESSAGE_HANDSHAKE_INITIATION): {
-+		struct message_handshake_initiation *message =
-+			(struct message_handshake_initiation *)skb->data;
-+
-+		if (packet_needs_cookie) {
-+			wg_packet_send_handshake_cookie(wg, skb,
-+							message->sender_index);
-+			return;
-+		}
-+		peer = wg_noise_handshake_consume_initiation(message, wg);
-+		if (unlikely(!peer)) {
-+			net_dbg_skb_ratelimited("%s: Invalid handshake initiation from %pISpfsc\n",
-+						wg->dev->name, skb);
-+			return;
-+		}
-+		wg_socket_set_peer_endpoint_from_skb(peer, skb);
-+		net_dbg_ratelimited("%s: Receiving handshake initiation from peer %llu (%pISpfsc)\n",
-+				    wg->dev->name, peer->internal_id,
-+				    &peer->endpoint.addr);
-+		wg_packet_send_handshake_response(peer);
-+		break;
-+	}
-+	case cpu_to_le32(MESSAGE_HANDSHAKE_RESPONSE): {
-+		struct message_handshake_response *message =
-+			(struct message_handshake_response *)skb->data;
-+
-+		if (packet_needs_cookie) {
-+			wg_packet_send_handshake_cookie(wg, skb,
-+							message->sender_index);
-+			return;
-+		}
-+		peer = wg_noise_handshake_consume_response(message, wg);
-+		if (unlikely(!peer)) {
-+			net_dbg_skb_ratelimited("%s: Invalid handshake response from %pISpfsc\n",
-+						wg->dev->name, skb);
-+			return;
-+		}
-+		wg_socket_set_peer_endpoint_from_skb(peer, skb);
-+		net_dbg_ratelimited("%s: Receiving handshake response from peer %llu (%pISpfsc)\n",
-+				    wg->dev->name, peer->internal_id,
-+				    &peer->endpoint.addr);
-+		if (wg_noise_handshake_begin_session(&peer->handshake,
-+						     &peer->keypairs)) {
-+			wg_timers_session_derived(peer);
-+			wg_timers_handshake_complete(peer);
-+			/* Calling this function will either send any existing
-+			 * packets in the queue and not send a keepalive, which
-+			 * is the best case, Or, if there's nothing in the
-+			 * queue, it will send a keepalive, in order to give
-+			 * immediate confirmation of the session.
-+			 */
-+			wg_packet_send_keepalive(peer);
-+		}
-+		break;
-+	}
-+	}
-+
-+	if (unlikely(!peer)) {
-+		WARN(1, "Somehow a wrong type of packet wound up in the handshake queue!\n");
-+		return;
-+	}
-+
-+	local_bh_disable();
-+	update_rx_stats(peer, skb->len);
-+	local_bh_enable();
-+
-+	wg_timers_any_authenticated_packet_received(peer);
-+	wg_timers_any_authenticated_packet_traversal(peer);
-+	wg_peer_put(peer);
-+}
-+
-+void wg_packet_handshake_receive_worker(struct work_struct *work)
-+{
-+	struct wg_device *wg = container_of(work, struct multicore_worker,
-+					    work)->ptr;
-+	struct sk_buff *skb;
-+
-+	while ((skb = skb_dequeue(&wg->incoming_handshakes)) != NULL) {
-+		wg_receive_handshake_packet(wg, skb);
-+		dev_kfree_skb(skb);
-+		cond_resched();
-+	}
-+}
-+
-+static void keep_key_fresh(struct wg_peer *peer)
-+{
-+	struct noise_keypair *keypair;
-+	bool send = false;
-+
-+	if (peer->sent_lastminute_handshake)
-+		return;
-+
-+	rcu_read_lock_bh();
-+	keypair = rcu_dereference_bh(peer->keypairs.current_keypair);
-+	if (likely(keypair && READ_ONCE(keypair->sending.is_valid)) &&
-+	    keypair->i_am_the_initiator &&
-+	    unlikely(wg_birthdate_has_expired(keypair->sending.birthdate,
-+			REJECT_AFTER_TIME - KEEPALIVE_TIMEOUT - REKEY_TIMEOUT)))
-+		send = true;
-+	rcu_read_unlock_bh();
-+
-+	if (send) {
-+		peer->sent_lastminute_handshake = true;
-+		wg_packet_send_queued_handshake_initiation(peer, false);
-+	}
-+}
-+
-+static bool decrypt_packet(struct sk_buff *skb, struct noise_symmetric_key *key)
-+{
-+	struct scatterlist sg[MAX_SKB_FRAGS + 8];
-+	struct sk_buff *trailer;
-+	unsigned int offset;
-+	int num_frags;
-+
-+	if (unlikely(!key))
-+		return false;
-+
-+	if (unlikely(!READ_ONCE(key->is_valid) ||
-+		  wg_birthdate_has_expired(key->birthdate, REJECT_AFTER_TIME) ||
-+		  key->counter.receive.counter >= REJECT_AFTER_MESSAGES)) {
-+		WRITE_ONCE(key->is_valid, false);
-+		return false;
-+	}
-+
-+	PACKET_CB(skb)->nonce =
-+		le64_to_cpu(((struct message_data *)skb->data)->counter);
-+
-+	/* We ensure that the network header is part of the packet before we
-+	 * call skb_cow_data, so that there's no chance that data is removed
-+	 * from the skb, so that later we can extract the original endpoint.
-+	 */
-+	offset = skb->data - skb_network_header(skb);
-+	skb_push(skb, offset);
-+	num_frags = skb_cow_data(skb, 0, &trailer);
-+	offset += sizeof(struct message_data);
-+	skb_pull(skb, offset);
-+	if (unlikely(num_frags < 0 || num_frags > ARRAY_SIZE(sg)))
-+		return false;
-+
-+	sg_init_table(sg, num_frags);
-+	if (skb_to_sgvec(skb, sg, 0, skb->len) <= 0)
-+		return false;
-+
-+	if (!chacha20poly1305_decrypt_sg_inplace(sg, skb->len, NULL, 0,
-+					         PACKET_CB(skb)->nonce,
-+						 key->key))
-+		return false;
-+
-+	/* Another ugly situation of pushing and pulling the header so as to
-+	 * keep endpoint information intact.
-+	 */
-+	skb_push(skb, offset);
-+	if (pskb_trim(skb, skb->len - noise_encrypted_len(0)))
-+		return false;
-+	skb_pull(skb, offset);
-+
-+	return true;
-+}
-+
-+/* This is RFC6479, a replay detection bitmap algorithm that avoids bitshifts */
-+static bool counter_validate(union noise_counter *counter, u64 their_counter)
-+{
-+	unsigned long index, index_current, top, i;
-+	bool ret = false;
-+
-+	spin_lock_bh(&counter->receive.lock);
-+
-+	if (unlikely(counter->receive.counter >= REJECT_AFTER_MESSAGES + 1 ||
-+		     their_counter >= REJECT_AFTER_MESSAGES))
-+		goto out;
-+
-+	++their_counter;
-+
-+	if (unlikely((COUNTER_WINDOW_SIZE + their_counter) <
-+		     counter->receive.counter))
-+		goto out;
-+
-+	index = their_counter >> ilog2(BITS_PER_LONG);
-+
-+	if (likely(their_counter > counter->receive.counter)) {
-+		index_current = counter->receive.counter >> ilog2(BITS_PER_LONG);
-+		top = min_t(unsigned long, index - index_current,
-+			    COUNTER_BITS_TOTAL / BITS_PER_LONG);
-+		for (i = 1; i <= top; ++i)
-+			counter->receive.backtrack[(i + index_current) &
-+				((COUNTER_BITS_TOTAL / BITS_PER_LONG) - 1)] = 0;
-+		counter->receive.counter = their_counter;
-+	}
-+
-+	index &= (COUNTER_BITS_TOTAL / BITS_PER_LONG) - 1;
-+	ret = !test_and_set_bit(their_counter & (BITS_PER_LONG - 1),
-+				&counter->receive.backtrack[index]);
-+
-+out:
-+	spin_unlock_bh(&counter->receive.lock);
-+	return ret;
-+}
-+
-+#include "selftest/counter.c"
-+
-+static void wg_packet_consume_data_done(struct wg_peer *peer,
-+					struct sk_buff *skb,
-+					struct endpoint *endpoint)
-+{
-+	struct net_device *dev = peer->device->dev;
-+	unsigned int len, len_before_trim;
-+	struct wg_peer *routed_peer;
-+
-+	wg_socket_set_peer_endpoint(peer, endpoint);
-+
-+	if (unlikely(wg_noise_received_with_keypair(&peer->keypairs,
-+						    PACKET_CB(skb)->keypair))) {
-+		wg_timers_handshake_complete(peer);
-+		wg_packet_send_staged_packets(peer);
-+	}
-+
-+	keep_key_fresh(peer);
-+
-+	wg_timers_any_authenticated_packet_received(peer);
-+	wg_timers_any_authenticated_packet_traversal(peer);
-+
-+	/* A packet with length 0 is a keepalive packet */
-+	if (unlikely(!skb->len)) {
-+		update_rx_stats(peer, message_data_len(0));
-+		net_dbg_ratelimited("%s: Receiving keepalive packet from peer %llu (%pISpfsc)\n",
-+				    dev->name, peer->internal_id,
-+				    &peer->endpoint.addr);
-+		goto packet_processed;
-+	}
-+
-+	wg_timers_data_received(peer);
-+
-+	if (unlikely(skb_network_header(skb) < skb->head))
-+		goto dishonest_packet_size;
-+	if (unlikely(!(pskb_network_may_pull(skb, sizeof(struct iphdr)) &&
-+		       (ip_hdr(skb)->version == 4 ||
-+			(ip_hdr(skb)->version == 6 &&
-+			 pskb_network_may_pull(skb, sizeof(struct ipv6hdr)))))))
-+		goto dishonest_packet_type;
-+
-+	skb->dev = dev;
-+	/* We've already verified the Poly1305 auth tag, which means this packet
-+	 * was not modified in transit. We can therefore tell the networking
-+	 * stack that all checksums of every layer of encapsulation have already
-+	 * been checked "by the hardware" and therefore is unneccessary to check
-+	 * again in software.
-+	 */
-+	skb->ip_summed = CHECKSUM_UNNECESSARY;
-+	skb->csum_level = ~0; /* All levels */
-+	skb->protocol = wg_skb_examine_untrusted_ip_hdr(skb);
-+	if (skb->protocol == htons(ETH_P_IP)) {
-+		len = ntohs(ip_hdr(skb)->tot_len);
-+		if (unlikely(len < sizeof(struct iphdr)))
-+			goto dishonest_packet_size;
-+		if (INET_ECN_is_ce(PACKET_CB(skb)->ds))
-+			IP_ECN_set_ce(ip_hdr(skb));
-+	} else if (skb->protocol == htons(ETH_P_IPV6)) {
-+		len = ntohs(ipv6_hdr(skb)->payload_len) +
-+		      sizeof(struct ipv6hdr);
-+		if (INET_ECN_is_ce(PACKET_CB(skb)->ds))
-+			IP6_ECN_set_ce(skb, ipv6_hdr(skb));
-+	} else {
-+		goto dishonest_packet_type;
-+	}
-+
-+	if (unlikely(len > skb->len))
-+		goto dishonest_packet_size;
-+	len_before_trim = skb->len;
-+	if (unlikely(pskb_trim(skb, len)))
-+		goto packet_processed;
-+
-+	routed_peer = wg_allowedips_lookup_src(&peer->device->peer_allowedips,
-+					       skb);
-+	wg_peer_put(routed_peer); /* We don't need the extra reference. */
-+
-+	if (unlikely(routed_peer != peer))
-+		goto dishonest_packet_peer;
-+
-+	if (unlikely(napi_gro_receive(&peer->napi, skb) == GRO_DROP)) {
-+		++dev->stats.rx_dropped;
-+		net_dbg_ratelimited("%s: Failed to give packet to userspace from peer %llu (%pISpfsc)\n",
-+				    dev->name, peer->internal_id,
-+				    &peer->endpoint.addr);
-+	} else {
-+		update_rx_stats(peer, message_data_len(len_before_trim));
-+	}
-+	return;
-+
-+dishonest_packet_peer:
-+	net_dbg_skb_ratelimited("%s: Packet has unallowed src IP (%pISc) from peer %llu (%pISpfsc)\n",
-+				dev->name, skb, peer->internal_id,
-+				&peer->endpoint.addr);
-+	++dev->stats.rx_errors;
-+	++dev->stats.rx_frame_errors;
-+	goto packet_processed;
-+dishonest_packet_type:
-+	net_dbg_ratelimited("%s: Packet is neither ipv4 nor ipv6 from peer %llu (%pISpfsc)\n",
-+			    dev->name, peer->internal_id, &peer->endpoint.addr);
-+	++dev->stats.rx_errors;
-+	++dev->stats.rx_frame_errors;
-+	goto packet_processed;
-+dishonest_packet_size:
-+	net_dbg_ratelimited("%s: Packet has incorrect size from peer %llu (%pISpfsc)\n",
-+			    dev->name, peer->internal_id, &peer->endpoint.addr);
-+	++dev->stats.rx_errors;
-+	++dev->stats.rx_length_errors;
-+	goto packet_processed;
-+packet_processed:
-+	dev_kfree_skb(skb);
-+}
-+
-+int wg_packet_rx_poll(struct napi_struct *napi, int budget)
-+{
-+	struct wg_peer *peer = container_of(napi, struct wg_peer, napi);
-+	struct crypt_queue *queue = &peer->rx_queue;
-+	struct noise_keypair *keypair;
-+	struct endpoint endpoint;
-+	enum packet_state state;
-+	struct sk_buff *skb;
-+	int work_done = 0;
-+	bool free;
-+
-+	if (unlikely(budget <= 0))
-+		return 0;
-+
-+	while ((skb = __ptr_ring_peek(&queue->ring)) != NULL &&
-+	       (state = atomic_read_acquire(&PACKET_CB(skb)->state)) !=
-+		       PACKET_STATE_UNCRYPTED) {
-+		__ptr_ring_discard_one(&queue->ring);
-+		peer = PACKET_PEER(skb);
-+		keypair = PACKET_CB(skb)->keypair;
-+		free = true;
-+
-+		if (unlikely(state != PACKET_STATE_CRYPTED))
-+			goto next;
-+
-+		if (unlikely(!counter_validate(&keypair->receiving.counter,
-+					       PACKET_CB(skb)->nonce))) {
-+			net_dbg_ratelimited("%s: Packet has invalid nonce %llu (max %llu)\n",
-+					    peer->device->dev->name,
-+					    PACKET_CB(skb)->nonce,
-+					    keypair->receiving.counter.receive.counter);
-+			goto next;
-+		}
-+
-+		if (unlikely(wg_socket_endpoint_from_skb(&endpoint, skb)))
-+			goto next;
-+
-+		wg_reset_packet(skb);
-+		wg_packet_consume_data_done(peer, skb, &endpoint);
-+		free = false;
-+
-+next:
-+		wg_noise_keypair_put(keypair, false);
-+		wg_peer_put(peer);
-+		if (unlikely(free))
-+			dev_kfree_skb(skb);
-+
-+		if (++work_done >= budget)
-+			break;
-+	}
-+
-+	if (work_done < budget)
-+		napi_complete_done(napi, work_done);
-+
-+	return work_done;
-+}
-+
-+void wg_packet_decrypt_worker(struct work_struct *work)
-+{
-+	struct crypt_queue *queue = container_of(work, struct multicore_worker,
-+						 work)->ptr;
-+	struct sk_buff *skb;
-+
-+	while ((skb = ptr_ring_consume_bh(&queue->ring)) != NULL) {
-+		enum packet_state state = likely(decrypt_packet(skb,
-+				&PACKET_CB(skb)->keypair->receiving)) ?
-+				PACKET_STATE_CRYPTED : PACKET_STATE_DEAD;
-+		wg_queue_enqueue_per_peer_napi(skb, state);
-+	}
-+}
-+
-+static void wg_packet_consume_data(struct wg_device *wg, struct sk_buff *skb)
-+{
-+	__le32 idx = ((struct message_data *)skb->data)->key_idx;
-+	struct wg_peer *peer = NULL;
-+	int ret;
-+
-+	rcu_read_lock_bh();
-+	PACKET_CB(skb)->keypair =
-+		(struct noise_keypair *)wg_index_hashtable_lookup(
-+			wg->index_hashtable, INDEX_HASHTABLE_KEYPAIR, idx,
-+			&peer);
-+	if (unlikely(!wg_noise_keypair_get(PACKET_CB(skb)->keypair)))
-+		goto err_keypair;
-+
-+	if (unlikely(READ_ONCE(peer->is_dead)))
-+		goto err;
-+
-+	ret = wg_queue_enqueue_per_device_and_peer(&wg->decrypt_queue,
-+						   &peer->rx_queue, skb,
-+						   wg->packet_crypt_wq,
-+						   &wg->decrypt_queue.last_cpu);
-+	if (unlikely(ret == -EPIPE))
-+		wg_queue_enqueue_per_peer_napi(skb, PACKET_STATE_DEAD);
-+	if (likely(!ret || ret == -EPIPE)) {
-+		rcu_read_unlock_bh();
-+		return;
-+	}
-+err:
-+	wg_noise_keypair_put(PACKET_CB(skb)->keypair, false);
-+err_keypair:
-+	rcu_read_unlock_bh();
-+	wg_peer_put(peer);
-+	dev_kfree_skb(skb);
-+}
-+
-+void wg_packet_receive(struct wg_device *wg, struct sk_buff *skb)
-+{
-+	if (unlikely(prepare_skb_header(skb, wg) < 0))
-+		goto err;
-+	switch (SKB_TYPE_LE32(skb)) {
-+	case cpu_to_le32(MESSAGE_HANDSHAKE_INITIATION):
-+	case cpu_to_le32(MESSAGE_HANDSHAKE_RESPONSE):
-+	case cpu_to_le32(MESSAGE_HANDSHAKE_COOKIE): {
-+		int cpu;
-+
-+		if (skb_queue_len(&wg->incoming_handshakes) >
-+			    MAX_QUEUED_INCOMING_HANDSHAKES ||
-+		    unlikely(!rng_is_initialized())) {
-+			net_dbg_skb_ratelimited("%s: Dropping handshake packet from %pISpfsc\n",
-+						wg->dev->name, skb);
-+			goto err;
-+		}
-+		skb_queue_tail(&wg->incoming_handshakes, skb);
-+		/* Queues up a call to packet_process_queued_handshake_
-+		 * packets(skb):
-+		 */
-+		cpu = wg_cpumask_next_online(&wg->incoming_handshake_cpu);
-+		queue_work_on(cpu, wg->handshake_receive_wq,
-+			&per_cpu_ptr(wg->incoming_handshakes_worker, cpu)->work);
-+		break;
-+	}
-+	case cpu_to_le32(MESSAGE_DATA):
-+		PACKET_CB(skb)->ds = ip_tunnel_get_dsfield(ip_hdr(skb), skb);
-+		wg_packet_consume_data(wg, skb);
-+		break;
-+	default:
-+		net_dbg_skb_ratelimited("%s: Invalid packet from %pISpfsc\n",
-+					wg->dev->name, skb);
-+		goto err;
-+	}
-+	return;
-+
-+err:
-+	dev_kfree_skb(skb);
-+}
---- /dev/null
-+++ b/drivers/net/wireguard/selftest/allowedips.c
-@@ -0,0 +1,683 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ *
-+ * This contains some basic static unit tests for the allowedips data structure.
-+ * It also has two additional modes that are disabled and meant to be used by
-+ * folks directly playing with this file. If you define the macro
-+ * DEBUG_PRINT_TRIE_GRAPHVIZ to be 1, then every time there's a full tree in
-+ * memory, it will be printed out as KERN_DEBUG in a format that can be passed
-+ * to graphviz (the dot command) to visualize it. If you define the macro
-+ * DEBUG_RANDOM_TRIE to be 1, then there will be an extremely costly set of
-+ * randomized tests done against a trivial implementation, which may take
-+ * upwards of a half-hour to complete. There's no set of users who should be
-+ * enabling these, and the only developers that should go anywhere near these
-+ * nobs are the ones who are reading this comment.
-+ */
-+
-+#ifdef DEBUG
-+
-+#include <linux/siphash.h>
-+
-+static __init void swap_endian_and_apply_cidr(u8 *dst, const u8 *src, u8 bits,
-+					      u8 cidr)
-+{
-+	swap_endian(dst, src, bits);
-+	memset(dst + (cidr + 7) / 8, 0, bits / 8 - (cidr + 7) / 8);
-+	if (cidr)
-+		dst[(cidr + 7) / 8 - 1] &= ~0U << ((8 - (cidr % 8)) % 8);
-+}
-+
-+static __init void print_node(struct allowedips_node *node, u8 bits)
-+{
-+	char *fmt_connection = KERN_DEBUG "\t\"%p/%d\" -> \"%p/%d\";\n";
-+	char *fmt_declaration = KERN_DEBUG
-+		"\t\"%p/%d\"[style=%s, color=\"#%06x\"];\n";
-+	char *style = "dotted";
-+	u8 ip1[16], ip2[16];
-+	u32 color = 0;
-+
-+	if (bits == 32) {
-+		fmt_connection = KERN_DEBUG "\t\"%pI4/%d\" -> \"%pI4/%d\";\n";
-+		fmt_declaration = KERN_DEBUG
-+			"\t\"%pI4/%d\"[style=%s, color=\"#%06x\"];\n";
-+	} else if (bits == 128) {
-+		fmt_connection = KERN_DEBUG "\t\"%pI6/%d\" -> \"%pI6/%d\";\n";
-+		fmt_declaration = KERN_DEBUG
-+			"\t\"%pI6/%d\"[style=%s, color=\"#%06x\"];\n";
-+	}
-+	if (node->peer) {
-+		hsiphash_key_t key = { { 0 } };
-+
-+		memcpy(&key, &node->peer, sizeof(node->peer));
-+		color = hsiphash_1u32(0xdeadbeef, &key) % 200 << 16 |
-+			hsiphash_1u32(0xbabecafe, &key) % 200 << 8 |
-+			hsiphash_1u32(0xabad1dea, &key) % 200;
-+		style = "bold";
-+	}
-+	swap_endian_and_apply_cidr(ip1, node->bits, bits, node->cidr);
-+	printk(fmt_declaration, ip1, node->cidr, style, color);
-+	if (node->bit[0]) {
-+		swap_endian_and_apply_cidr(ip2,
-+				rcu_dereference_raw(node->bit[0])->bits, bits,
-+				node->cidr);
-+		printk(fmt_connection, ip1, node->cidr, ip2,
-+		       rcu_dereference_raw(node->bit[0])->cidr);
-+		print_node(rcu_dereference_raw(node->bit[0]), bits);
-+	}
-+	if (node->bit[1]) {
-+		swap_endian_and_apply_cidr(ip2,
-+				rcu_dereference_raw(node->bit[1])->bits,
-+				bits, node->cidr);
-+		printk(fmt_connection, ip1, node->cidr, ip2,
-+		       rcu_dereference_raw(node->bit[1])->cidr);
-+		print_node(rcu_dereference_raw(node->bit[1]), bits);
-+	}
-+}
-+
-+static __init void print_tree(struct allowedips_node __rcu *top, u8 bits)
-+{
-+	printk(KERN_DEBUG "digraph trie {\n");
-+	print_node(rcu_dereference_raw(top), bits);
-+	printk(KERN_DEBUG "}\n");
-+}
-+
-+enum {
-+	NUM_PEERS = 2000,
-+	NUM_RAND_ROUTES = 400,
-+	NUM_MUTATED_ROUTES = 100,
-+	NUM_QUERIES = NUM_RAND_ROUTES * NUM_MUTATED_ROUTES * 30
-+};
-+
-+struct horrible_allowedips {
-+	struct hlist_head head;
-+};
-+
-+struct horrible_allowedips_node {
-+	struct hlist_node table;
-+	union nf_inet_addr ip;
-+	union nf_inet_addr mask;
-+	u8 ip_version;
-+	void *value;
-+};
-+
-+static __init void horrible_allowedips_init(struct horrible_allowedips *table)
-+{
-+	INIT_HLIST_HEAD(&table->head);
-+}
-+
-+static __init void horrible_allowedips_free(struct horrible_allowedips *table)
-+{
-+	struct horrible_allowedips_node *node;
-+	struct hlist_node *h;
-+
-+	hlist_for_each_entry_safe(node, h, &table->head, table) {
-+		hlist_del(&node->table);
-+		kfree(node);
-+	}
-+}
-+
-+static __init inline union nf_inet_addr horrible_cidr_to_mask(u8 cidr)
-+{
-+	union nf_inet_addr mask;
-+
-+	memset(&mask, 0x00, 128 / 8);
-+	memset(&mask, 0xff, cidr / 8);
-+	if (cidr % 32)
-+		mask.all[cidr / 32] = (__force u32)htonl(
-+			(0xFFFFFFFFUL << (32 - (cidr % 32))) & 0xFFFFFFFFUL);
-+	return mask;
-+}
-+
-+static __init inline u8 horrible_mask_to_cidr(union nf_inet_addr subnet)
-+{
-+	return hweight32(subnet.all[0]) + hweight32(subnet.all[1]) +
-+	       hweight32(subnet.all[2]) + hweight32(subnet.all[3]);
-+}
-+
-+static __init inline void
-+horrible_mask_self(struct horrible_allowedips_node *node)
-+{
-+	if (node->ip_version == 4) {
-+		node->ip.ip &= node->mask.ip;
-+	} else if (node->ip_version == 6) {
-+		node->ip.ip6[0] &= node->mask.ip6[0];
-+		node->ip.ip6[1] &= node->mask.ip6[1];
-+		node->ip.ip6[2] &= node->mask.ip6[2];
-+		node->ip.ip6[3] &= node->mask.ip6[3];
-+	}
-+}
-+
-+static __init inline bool
-+horrible_match_v4(const struct horrible_allowedips_node *node,
-+		  struct in_addr *ip)
-+{
-+	return (ip->s_addr & node->mask.ip) == node->ip.ip;
-+}
-+
-+static __init inline bool
-+horrible_match_v6(const struct horrible_allowedips_node *node,
-+		  struct in6_addr *ip)
-+{
-+	return (ip->in6_u.u6_addr32[0] & node->mask.ip6[0]) ==
-+		       node->ip.ip6[0] &&
-+	       (ip->in6_u.u6_addr32[1] & node->mask.ip6[1]) ==
-+		       node->ip.ip6[1] &&
-+	       (ip->in6_u.u6_addr32[2] & node->mask.ip6[2]) ==
-+		       node->ip.ip6[2] &&
-+	       (ip->in6_u.u6_addr32[3] & node->mask.ip6[3]) == node->ip.ip6[3];
-+}
-+
-+static __init void
-+horrible_insert_ordered(struct horrible_allowedips *table,
-+			struct horrible_allowedips_node *node)
-+{
-+	struct horrible_allowedips_node *other = NULL, *where = NULL;
-+	u8 my_cidr = horrible_mask_to_cidr(node->mask);
-+
-+	hlist_for_each_entry(other, &table->head, table) {
-+		if (!memcmp(&other->mask, &node->mask,
-+			    sizeof(union nf_inet_addr)) &&
-+		    !memcmp(&other->ip, &node->ip,
-+			    sizeof(union nf_inet_addr)) &&
-+		    other->ip_version == node->ip_version) {
-+			other->value = node->value;
-+			kfree(node);
-+			return;
-+		}
-+		where = other;
-+		if (horrible_mask_to_cidr(other->mask) <= my_cidr)
-+			break;
-+	}
-+	if (!other && !where)
-+		hlist_add_head(&node->table, &table->head);
-+	else if (!other)
-+		hlist_add_behind(&node->table, &where->table);
-+	else
-+		hlist_add_before(&node->table, &where->table);
-+}
-+
-+static __init int
-+horrible_allowedips_insert_v4(struct horrible_allowedips *table,
-+			      struct in_addr *ip, u8 cidr, void *value)
-+{
-+	struct horrible_allowedips_node *node = kzalloc(sizeof(*node),
-+							GFP_KERNEL);
-+
-+	if (unlikely(!node))
-+		return -ENOMEM;
-+	node->ip.in = *ip;
-+	node->mask = horrible_cidr_to_mask(cidr);
-+	node->ip_version = 4;
-+	node->value = value;
-+	horrible_mask_self(node);
-+	horrible_insert_ordered(table, node);
-+	return 0;
-+}
-+
-+static __init int
-+horrible_allowedips_insert_v6(struct horrible_allowedips *table,
-+			      struct in6_addr *ip, u8 cidr, void *value)
-+{
-+	struct horrible_allowedips_node *node = kzalloc(sizeof(*node),
-+							GFP_KERNEL);
-+
-+	if (unlikely(!node))
-+		return -ENOMEM;
-+	node->ip.in6 = *ip;
-+	node->mask = horrible_cidr_to_mask(cidr);
-+	node->ip_version = 6;
-+	node->value = value;
-+	horrible_mask_self(node);
-+	horrible_insert_ordered(table, node);
-+	return 0;
-+}
-+
-+static __init void *
-+horrible_allowedips_lookup_v4(struct horrible_allowedips *table,
-+			      struct in_addr *ip)
-+{
-+	struct horrible_allowedips_node *node;
-+	void *ret = NULL;
-+
-+	hlist_for_each_entry(node, &table->head, table) {
-+		if (node->ip_version != 4)
-+			continue;
-+		if (horrible_match_v4(node, ip)) {
-+			ret = node->value;
-+			break;
-+		}
-+	}
-+	return ret;
-+}
-+
-+static __init void *
-+horrible_allowedips_lookup_v6(struct horrible_allowedips *table,
-+			      struct in6_addr *ip)
-+{
-+	struct horrible_allowedips_node *node;
-+	void *ret = NULL;
-+
-+	hlist_for_each_entry(node, &table->head, table) {
-+		if (node->ip_version != 6)
-+			continue;
-+		if (horrible_match_v6(node, ip)) {
-+			ret = node->value;
-+			break;
-+		}
-+	}
-+	return ret;
-+}
-+
-+static __init bool randomized_test(void)
-+{
-+	unsigned int i, j, k, mutate_amount, cidr;
-+	u8 ip[16], mutate_mask[16], mutated[16];
-+	struct wg_peer **peers, *peer;
-+	struct horrible_allowedips h;
-+	DEFINE_MUTEX(mutex);
-+	struct allowedips t;
-+	bool ret = false;
-+
-+	mutex_init(&mutex);
-+
-+	wg_allowedips_init(&t);
-+	horrible_allowedips_init(&h);
-+
-+	peers = kcalloc(NUM_PEERS, sizeof(*peers), GFP_KERNEL);
-+	if (unlikely(!peers)) {
-+		pr_err("allowedips random self-test malloc: FAIL\n");
-+		goto free;
-+	}
-+	for (i = 0; i < NUM_PEERS; ++i) {
-+		peers[i] = kzalloc(sizeof(*peers[i]), GFP_KERNEL);
-+		if (unlikely(!peers[i])) {
-+			pr_err("allowedips random self-test malloc: FAIL\n");
-+			goto free;
-+		}
-+		kref_init(&peers[i]->refcount);
-+	}
-+
-+	mutex_lock(&mutex);
-+
-+	for (i = 0; i < NUM_RAND_ROUTES; ++i) {
-+		prandom_bytes(ip, 4);
-+		cidr = prandom_u32_max(32) + 1;
-+		peer = peers[prandom_u32_max(NUM_PEERS)];
-+		if (wg_allowedips_insert_v4(&t, (struct in_addr *)ip, cidr,
-+					    peer, &mutex) < 0) {
-+			pr_err("allowedips random self-test malloc: FAIL\n");
-+			goto free_locked;
-+		}
-+		if (horrible_allowedips_insert_v4(&h, (struct in_addr *)ip,
-+						  cidr, peer) < 0) {
-+			pr_err("allowedips random self-test malloc: FAIL\n");
-+			goto free_locked;
-+		}
-+		for (j = 0; j < NUM_MUTATED_ROUTES; ++j) {
-+			memcpy(mutated, ip, 4);
-+			prandom_bytes(mutate_mask, 4);
-+			mutate_amount = prandom_u32_max(32);
-+			for (k = 0; k < mutate_amount / 8; ++k)
-+				mutate_mask[k] = 0xff;
-+			mutate_mask[k] = 0xff
-+					 << ((8 - (mutate_amount % 8)) % 8);
-+			for (; k < 4; ++k)
-+				mutate_mask[k] = 0;
-+			for (k = 0; k < 4; ++k)
-+				mutated[k] = (mutated[k] & mutate_mask[k]) |
-+					     (~mutate_mask[k] &
-+					      prandom_u32_max(256));
-+			cidr = prandom_u32_max(32) + 1;
-+			peer = peers[prandom_u32_max(NUM_PEERS)];
-+			if (wg_allowedips_insert_v4(&t,
-+						    (struct in_addr *)mutated,
-+						    cidr, peer, &mutex) < 0) {
-+				pr_err("allowedips random malloc: FAIL\n");
-+				goto free_locked;
-+			}
-+			if (horrible_allowedips_insert_v4(&h,
-+				(struct in_addr *)mutated, cidr, peer)) {
-+				pr_err("allowedips random self-test malloc: FAIL\n");
-+				goto free_locked;
-+			}
-+		}
-+	}
-+
-+	for (i = 0; i < NUM_RAND_ROUTES; ++i) {
-+		prandom_bytes(ip, 16);
-+		cidr = prandom_u32_max(128) + 1;
-+		peer = peers[prandom_u32_max(NUM_PEERS)];
-+		if (wg_allowedips_insert_v6(&t, (struct in6_addr *)ip, cidr,
-+					    peer, &mutex) < 0) {
-+			pr_err("allowedips random self-test malloc: FAIL\n");
-+			goto free_locked;
-+		}
-+		if (horrible_allowedips_insert_v6(&h, (struct in6_addr *)ip,
-+						  cidr, peer) < 0) {
-+			pr_err("allowedips random self-test malloc: FAIL\n");
-+			goto free_locked;
-+		}
-+		for (j = 0; j < NUM_MUTATED_ROUTES; ++j) {
-+			memcpy(mutated, ip, 16);
-+			prandom_bytes(mutate_mask, 16);
-+			mutate_amount = prandom_u32_max(128);
-+			for (k = 0; k < mutate_amount / 8; ++k)
-+				mutate_mask[k] = 0xff;
-+			mutate_mask[k] = 0xff
-+					 << ((8 - (mutate_amount % 8)) % 8);
-+			for (; k < 4; ++k)
-+				mutate_mask[k] = 0;
-+			for (k = 0; k < 4; ++k)
-+				mutated[k] = (mutated[k] & mutate_mask[k]) |
-+					     (~mutate_mask[k] &
-+					      prandom_u32_max(256));
-+			cidr = prandom_u32_max(128) + 1;
-+			peer = peers[prandom_u32_max(NUM_PEERS)];
-+			if (wg_allowedips_insert_v6(&t,
-+						    (struct in6_addr *)mutated,
-+						    cidr, peer, &mutex) < 0) {
-+				pr_err("allowedips random self-test malloc: FAIL\n");
-+				goto free_locked;
-+			}
-+			if (horrible_allowedips_insert_v6(
-+				    &h, (struct in6_addr *)mutated, cidr,
-+				    peer)) {
-+				pr_err("allowedips random self-test malloc: FAIL\n");
-+				goto free_locked;
-+			}
-+		}
-+	}
-+
-+	mutex_unlock(&mutex);
-+
-+	if (IS_ENABLED(DEBUG_PRINT_TRIE_GRAPHVIZ)) {
-+		print_tree(t.root4, 32);
-+		print_tree(t.root6, 128);
-+	}
-+
-+	for (i = 0; i < NUM_QUERIES; ++i) {
-+		prandom_bytes(ip, 4);
-+		if (lookup(t.root4, 32, ip) !=
-+		    horrible_allowedips_lookup_v4(&h, (struct in_addr *)ip)) {
-+			pr_err("allowedips random self-test: FAIL\n");
-+			goto free;
-+		}
-+	}
-+
-+	for (i = 0; i < NUM_QUERIES; ++i) {
-+		prandom_bytes(ip, 16);
-+		if (lookup(t.root6, 128, ip) !=
-+		    horrible_allowedips_lookup_v6(&h, (struct in6_addr *)ip)) {
-+			pr_err("allowedips random self-test: FAIL\n");
-+			goto free;
-+		}
-+	}
-+	ret = true;
-+
-+free:
-+	mutex_lock(&mutex);
-+free_locked:
-+	wg_allowedips_free(&t, &mutex);
-+	mutex_unlock(&mutex);
-+	horrible_allowedips_free(&h);
-+	if (peers) {
-+		for (i = 0; i < NUM_PEERS; ++i)
-+			kfree(peers[i]);
-+	}
-+	kfree(peers);
-+	return ret;
-+}
-+
-+static __init inline struct in_addr *ip4(u8 a, u8 b, u8 c, u8 d)
-+{
-+	static struct in_addr ip;
-+	u8 *split = (u8 *)&ip;
-+
-+	split[0] = a;
-+	split[1] = b;
-+	split[2] = c;
-+	split[3] = d;
-+	return &ip;
-+}
-+
-+static __init inline struct in6_addr *ip6(u32 a, u32 b, u32 c, u32 d)
-+{
-+	static struct in6_addr ip;
-+	__be32 *split = (__be32 *)&ip;
-+
-+	split[0] = cpu_to_be32(a);
-+	split[1] = cpu_to_be32(b);
-+	split[2] = cpu_to_be32(c);
-+	split[3] = cpu_to_be32(d);
-+	return &ip;
-+}
-+
-+static __init struct wg_peer *init_peer(void)
-+{
-+	struct wg_peer *peer = kzalloc(sizeof(*peer), GFP_KERNEL);
-+
-+	if (!peer)
-+		return NULL;
-+	kref_init(&peer->refcount);
-+	INIT_LIST_HEAD(&peer->allowedips_list);
-+	return peer;
-+}
-+
-+#define insert(version, mem, ipa, ipb, ipc, ipd, cidr)                       \
-+	wg_allowedips_insert_v##version(&t, ip##version(ipa, ipb, ipc, ipd), \
-+					cidr, mem, &mutex)
-+
-+#define maybe_fail() do {                                               \
-+		++i;                                                    \
-+		if (!_s) {                                              \
-+			pr_info("allowedips self-test %zu: FAIL\n", i); \
-+			success = false;                                \
-+		}                                                       \
-+	} while (0)
-+
-+#define test(version, mem, ipa, ipb, ipc, ipd) do {                          \
-+		bool _s = lookup(t.root##version, (version) == 4 ? 32 : 128, \
-+				 ip##version(ipa, ipb, ipc, ipd)) == (mem);  \
-+		maybe_fail();                                                \
-+	} while (0)
-+
-+#define test_negative(version, mem, ipa, ipb, ipc, ipd) do {                 \
-+		bool _s = lookup(t.root##version, (version) == 4 ? 32 : 128, \
-+				 ip##version(ipa, ipb, ipc, ipd)) != (mem);  \
-+		maybe_fail();                                                \
-+	} while (0)
-+
-+#define test_boolean(cond) do {   \
-+		bool _s = (cond); \
-+		maybe_fail();     \
-+	} while (0)
-+
-+bool __init wg_allowedips_selftest(void)
-+{
-+	bool found_a = false, found_b = false, found_c = false, found_d = false,
-+	     found_e = false, found_other = false;
-+	struct wg_peer *a = init_peer(), *b = init_peer(), *c = init_peer(),
-+		       *d = init_peer(), *e = init_peer(), *f = init_peer(),
-+		       *g = init_peer(), *h = init_peer();
-+	struct allowedips_node *iter_node;
-+	bool success = false;
-+	struct allowedips t;
-+	DEFINE_MUTEX(mutex);
-+	struct in6_addr ip;
-+	size_t i = 0, count = 0;
-+	__be64 part;
-+
-+	mutex_init(&mutex);
-+	mutex_lock(&mutex);
-+	wg_allowedips_init(&t);
-+
-+	if (!a || !b || !c || !d || !e || !f || !g || !h) {
-+		pr_err("allowedips self-test malloc: FAIL\n");
-+		goto free;
-+	}
-+
-+	insert(4, a, 192, 168, 4, 0, 24);
-+	insert(4, b, 192, 168, 4, 4, 32);
-+	insert(4, c, 192, 168, 0, 0, 16);
-+	insert(4, d, 192, 95, 5, 64, 27);
-+	/* replaces previous entry, and maskself is required */
-+	insert(4, c, 192, 95, 5, 65, 27);
-+	insert(6, d, 0x26075300, 0x60006b00, 0, 0xc05f0543, 128);
-+	insert(6, c, 0x26075300, 0x60006b00, 0, 0, 64);
-+	insert(4, e, 0, 0, 0, 0, 0);
-+	insert(6, e, 0, 0, 0, 0, 0);
-+	/* replaces previous entry */
-+	insert(6, f, 0, 0, 0, 0, 0);
-+	insert(6, g, 0x24046800, 0, 0, 0, 32);
-+	/* maskself is required */
-+	insert(6, h, 0x24046800, 0x40040800, 0xdeadbeef, 0xdeadbeef, 64);
-+	insert(6, a, 0x24046800, 0x40040800, 0xdeadbeef, 0xdeadbeef, 128);
-+	insert(6, c, 0x24446800, 0x40e40800, 0xdeaebeef, 0xdefbeef, 128);
-+	insert(6, b, 0x24446800, 0xf0e40800, 0xeeaebeef, 0, 98);
-+	insert(4, g, 64, 15, 112, 0, 20);
-+	/* maskself is required */
-+	insert(4, h, 64, 15, 123, 211, 25);
-+	insert(4, a, 10, 0, 0, 0, 25);
-+	insert(4, b, 10, 0, 0, 128, 25);
-+	insert(4, a, 10, 1, 0, 0, 30);
-+	insert(4, b, 10, 1, 0, 4, 30);
-+	insert(4, c, 10, 1, 0, 8, 29);
-+	insert(4, d, 10, 1, 0, 16, 29);
-+
-+	if (IS_ENABLED(DEBUG_PRINT_TRIE_GRAPHVIZ)) {
-+		print_tree(t.root4, 32);
-+		print_tree(t.root6, 128);
-+	}
-+
-+	success = true;
-+
-+	test(4, a, 192, 168, 4, 20);
-+	test(4, a, 192, 168, 4, 0);
-+	test(4, b, 192, 168, 4, 4);
-+	test(4, c, 192, 168, 200, 182);
-+	test(4, c, 192, 95, 5, 68);
-+	test(4, e, 192, 95, 5, 96);
-+	test(6, d, 0x26075300, 0x60006b00, 0, 0xc05f0543);
-+	test(6, c, 0x26075300, 0x60006b00, 0, 0xc02e01ee);
-+	test(6, f, 0x26075300, 0x60006b01, 0, 0);
-+	test(6, g, 0x24046800, 0x40040806, 0, 0x1006);
-+	test(6, g, 0x24046800, 0x40040806, 0x1234, 0x5678);
-+	test(6, f, 0x240467ff, 0x40040806, 0x1234, 0x5678);
-+	test(6, f, 0x24046801, 0x40040806, 0x1234, 0x5678);
-+	test(6, h, 0x24046800, 0x40040800, 0x1234, 0x5678);
-+	test(6, h, 0x24046800, 0x40040800, 0, 0);
-+	test(6, h, 0x24046800, 0x40040800, 0x10101010, 0x10101010);
-+	test(6, a, 0x24046800, 0x40040800, 0xdeadbeef, 0xdeadbeef);
-+	test(4, g, 64, 15, 116, 26);
-+	test(4, g, 64, 15, 127, 3);
-+	test(4, g, 64, 15, 123, 1);
-+	test(4, h, 64, 15, 123, 128);
-+	test(4, h, 64, 15, 123, 129);
-+	test(4, a, 10, 0, 0, 52);
-+	test(4, b, 10, 0, 0, 220);
-+	test(4, a, 10, 1, 0, 2);
-+	test(4, b, 10, 1, 0, 6);
-+	test(4, c, 10, 1, 0, 10);
-+	test(4, d, 10, 1, 0, 20);
-+
-+	insert(4, a, 1, 0, 0, 0, 32);
-+	insert(4, a, 64, 0, 0, 0, 32);
-+	insert(4, a, 128, 0, 0, 0, 32);
-+	insert(4, a, 192, 0, 0, 0, 32);
-+	insert(4, a, 255, 0, 0, 0, 32);
-+	wg_allowedips_remove_by_peer(&t, a, &mutex);
-+	test_negative(4, a, 1, 0, 0, 0);
-+	test_negative(4, a, 64, 0, 0, 0);
-+	test_negative(4, a, 128, 0, 0, 0);
-+	test_negative(4, a, 192, 0, 0, 0);
-+	test_negative(4, a, 255, 0, 0, 0);
-+
-+	wg_allowedips_free(&t, &mutex);
-+	wg_allowedips_init(&t);
-+	insert(4, a, 192, 168, 0, 0, 16);
-+	insert(4, a, 192, 168, 0, 0, 24);
-+	wg_allowedips_remove_by_peer(&t, a, &mutex);
-+	test_negative(4, a, 192, 168, 0, 1);
-+
-+	/* These will hit the WARN_ON(len >= 128) in free_node if something
-+	 * goes wrong.
-+	 */
-+	for (i = 0; i < 128; ++i) {
-+		part = cpu_to_be64(~(1LLU << (i % 64)));
-+		memset(&ip, 0xff, 16);
-+		memcpy((u8 *)&ip + (i < 64) * 8, &part, 8);
-+		wg_allowedips_insert_v6(&t, &ip, 128, a, &mutex);
-+	}
-+
-+	wg_allowedips_free(&t, &mutex);
-+
-+	wg_allowedips_init(&t);
-+	insert(4, a, 192, 95, 5, 93, 27);
-+	insert(6, a, 0x26075300, 0x60006b00, 0, 0xc05f0543, 128);
-+	insert(4, a, 10, 1, 0, 20, 29);
-+	insert(6, a, 0x26075300, 0x6d8a6bf8, 0xdab1f1df, 0xc05f1523, 83);
-+	insert(6, a, 0x26075300, 0x6d8a6bf8, 0xdab1f1df, 0xc05f1523, 21);
-+	list_for_each_entry(iter_node, &a->allowedips_list, peer_list) {
-+		u8 cidr, ip[16] __aligned(__alignof(u64));
-+		int family = wg_allowedips_read_node(iter_node, ip, &cidr);
-+
-+		count++;
-+
-+		if (cidr == 27 && family == AF_INET &&
-+		    !memcmp(ip, ip4(192, 95, 5, 64), sizeof(struct in_addr)))
-+			found_a = true;
-+		else if (cidr == 128 && family == AF_INET6 &&
-+			 !memcmp(ip, ip6(0x26075300, 0x60006b00, 0, 0xc05f0543),
-+				 sizeof(struct in6_addr)))
-+			found_b = true;
-+		else if (cidr == 29 && family == AF_INET &&
-+			 !memcmp(ip, ip4(10, 1, 0, 16), sizeof(struct in_addr)))
-+			found_c = true;
-+		else if (cidr == 83 && family == AF_INET6 &&
-+			 !memcmp(ip, ip6(0x26075300, 0x6d8a6bf8, 0xdab1e000, 0),
-+				 sizeof(struct in6_addr)))
-+			found_d = true;
-+		else if (cidr == 21 && family == AF_INET6 &&
-+			 !memcmp(ip, ip6(0x26075000, 0, 0, 0),
-+				 sizeof(struct in6_addr)))
-+			found_e = true;
-+		else
-+			found_other = true;
-+	}
-+	test_boolean(count == 5);
-+	test_boolean(found_a);
-+	test_boolean(found_b);
-+	test_boolean(found_c);
-+	test_boolean(found_d);
-+	test_boolean(found_e);
-+	test_boolean(!found_other);
-+
-+	if (IS_ENABLED(DEBUG_RANDOM_TRIE) && success)
-+		success = randomized_test();
-+
-+	if (success)
-+		pr_info("allowedips self-tests: pass\n");
-+
-+free:
-+	wg_allowedips_free(&t, &mutex);
-+	kfree(a);
-+	kfree(b);
-+	kfree(c);
-+	kfree(d);
-+	kfree(e);
-+	kfree(f);
-+	kfree(g);
-+	kfree(h);
-+	mutex_unlock(&mutex);
-+
-+	return success;
-+}
-+
-+#undef test_negative
-+#undef test
-+#undef remove
-+#undef insert
-+#undef init_peer
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/wireguard/selftest/counter.c
-@@ -0,0 +1,104 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifdef DEBUG
-+bool __init wg_packet_counter_selftest(void)
-+{
-+	unsigned int test_num = 0, i;
-+	union noise_counter counter;
-+	bool success = true;
-+
-+#define T_INIT do {                                               \
-+		memset(&counter, 0, sizeof(union noise_counter)); \
-+		spin_lock_init(&counter.receive.lock);            \
-+	} while (0)
-+#define T_LIM (COUNTER_WINDOW_SIZE + 1)
-+#define T(n, v) do {                                                  \
-+		++test_num;                                           \
-+		if (counter_validate(&counter, n) != (v)) {           \
-+			pr_err("nonce counter self-test %u: FAIL\n",  \
-+			       test_num);                             \
-+			success = false;                              \
-+		}                                                     \
-+	} while (0)
-+
-+	T_INIT;
-+	/*  1 */ T(0, true);
-+	/*  2 */ T(1, true);
-+	/*  3 */ T(1, false);
-+	/*  4 */ T(9, true);
-+	/*  5 */ T(8, true);
-+	/*  6 */ T(7, true);
-+	/*  7 */ T(7, false);
-+	/*  8 */ T(T_LIM, true);
-+	/*  9 */ T(T_LIM - 1, true);
-+	/* 10 */ T(T_LIM - 1, false);
-+	/* 11 */ T(T_LIM - 2, true);
-+	/* 12 */ T(2, true);
-+	/* 13 */ T(2, false);
-+	/* 14 */ T(T_LIM + 16, true);
-+	/* 15 */ T(3, false);
-+	/* 16 */ T(T_LIM + 16, false);
-+	/* 17 */ T(T_LIM * 4, true);
-+	/* 18 */ T(T_LIM * 4 - (T_LIM - 1), true);
-+	/* 19 */ T(10, false);
-+	/* 20 */ T(T_LIM * 4 - T_LIM, false);
-+	/* 21 */ T(T_LIM * 4 - (T_LIM + 1), false);
-+	/* 22 */ T(T_LIM * 4 - (T_LIM - 2), true);
-+	/* 23 */ T(T_LIM * 4 + 1 - T_LIM, false);
-+	/* 24 */ T(0, false);
-+	/* 25 */ T(REJECT_AFTER_MESSAGES, false);
-+	/* 26 */ T(REJECT_AFTER_MESSAGES - 1, true);
-+	/* 27 */ T(REJECT_AFTER_MESSAGES, false);
-+	/* 28 */ T(REJECT_AFTER_MESSAGES - 1, false);
-+	/* 29 */ T(REJECT_AFTER_MESSAGES - 2, true);
-+	/* 30 */ T(REJECT_AFTER_MESSAGES + 1, false);
-+	/* 31 */ T(REJECT_AFTER_MESSAGES + 2, false);
-+	/* 32 */ T(REJECT_AFTER_MESSAGES - 2, false);
-+	/* 33 */ T(REJECT_AFTER_MESSAGES - 3, true);
-+	/* 34 */ T(0, false);
-+
-+	T_INIT;
-+	for (i = 1; i <= COUNTER_WINDOW_SIZE; ++i)
-+		T(i, true);
-+	T(0, true);
-+	T(0, false);
-+
-+	T_INIT;
-+	for (i = 2; i <= COUNTER_WINDOW_SIZE + 1; ++i)
-+		T(i, true);
-+	T(1, true);
-+	T(0, false);
-+
-+	T_INIT;
-+	for (i = COUNTER_WINDOW_SIZE + 1; i-- > 0;)
-+		T(i, true);
-+
-+	T_INIT;
-+	for (i = COUNTER_WINDOW_SIZE + 2; i-- > 1;)
-+		T(i, true);
-+	T(0, false);
-+
-+	T_INIT;
-+	for (i = COUNTER_WINDOW_SIZE + 1; i-- > 1;)
-+		T(i, true);
-+	T(COUNTER_WINDOW_SIZE + 1, true);
-+	T(0, false);
-+
-+	T_INIT;
-+	for (i = COUNTER_WINDOW_SIZE + 1; i-- > 1;)
-+		T(i, true);
-+	T(0, true);
-+	T(COUNTER_WINDOW_SIZE + 1, true);
-+
-+#undef T
-+#undef T_LIM
-+#undef T_INIT
-+
-+	if (success)
-+		pr_info("nonce counter self-tests: pass\n");
-+	return success;
-+}
-+#endif
---- /dev/null
-+++ b/drivers/net/wireguard/selftest/ratelimiter.c
-@@ -0,0 +1,226 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifdef DEBUG
-+
-+#include <linux/jiffies.h>
-+
-+static const struct {
-+	bool result;
-+	unsigned int msec_to_sleep_before;
-+} expected_results[] __initconst = {
-+	[0 ... PACKETS_BURSTABLE - 1] = { true, 0 },
-+	[PACKETS_BURSTABLE] = { false, 0 },
-+	[PACKETS_BURSTABLE + 1] = { true, MSEC_PER_SEC / PACKETS_PER_SECOND },
-+	[PACKETS_BURSTABLE + 2] = { false, 0 },
-+	[PACKETS_BURSTABLE + 3] = { true, (MSEC_PER_SEC / PACKETS_PER_SECOND) * 2 },
-+	[PACKETS_BURSTABLE + 4] = { true, 0 },
-+	[PACKETS_BURSTABLE + 5] = { false, 0 }
-+};
-+
-+static __init unsigned int maximum_jiffies_at_index(int index)
-+{
-+	unsigned int total_msecs = 2 * MSEC_PER_SEC / PACKETS_PER_SECOND / 3;
-+	int i;
-+
-+	for (i = 0; i <= index; ++i)
-+		total_msecs += expected_results[i].msec_to_sleep_before;
-+	return msecs_to_jiffies(total_msecs);
-+}
-+
-+static __init int timings_test(struct sk_buff *skb4, struct iphdr *hdr4,
-+			       struct sk_buff *skb6, struct ipv6hdr *hdr6,
-+			       int *test)
-+{
-+	unsigned long loop_start_time;
-+	int i;
-+
-+	wg_ratelimiter_gc_entries(NULL);
-+	rcu_barrier();
-+	loop_start_time = jiffies;
-+
-+	for (i = 0; i < ARRAY_SIZE(expected_results); ++i) {
-+		if (expected_results[i].msec_to_sleep_before)
-+			msleep(expected_results[i].msec_to_sleep_before);
-+
-+		if (time_is_before_jiffies(loop_start_time +
-+					   maximum_jiffies_at_index(i)))
-+			return -ETIMEDOUT;
-+		if (wg_ratelimiter_allow(skb4, &init_net) !=
-+					expected_results[i].result)
-+			return -EXFULL;
-+		++(*test);
-+
-+		hdr4->saddr = htonl(ntohl(hdr4->saddr) + i + 1);
-+		if (time_is_before_jiffies(loop_start_time +
-+					   maximum_jiffies_at_index(i)))
-+			return -ETIMEDOUT;
-+		if (!wg_ratelimiter_allow(skb4, &init_net))
-+			return -EXFULL;
-+		++(*test);
-+
-+		hdr4->saddr = htonl(ntohl(hdr4->saddr) - i - 1);
-+
-+#if IS_ENABLED(CONFIG_IPV6)
-+		hdr6->saddr.in6_u.u6_addr32[2] = htonl(i);
-+		hdr6->saddr.in6_u.u6_addr32[3] = htonl(i);
-+		if (time_is_before_jiffies(loop_start_time +
-+					   maximum_jiffies_at_index(i)))
-+			return -ETIMEDOUT;
-+		if (wg_ratelimiter_allow(skb6, &init_net) !=
-+					expected_results[i].result)
-+			return -EXFULL;
-+		++(*test);
-+
-+		hdr6->saddr.in6_u.u6_addr32[0] =
-+			htonl(ntohl(hdr6->saddr.in6_u.u6_addr32[0]) + i + 1);
-+		if (time_is_before_jiffies(loop_start_time +
-+					   maximum_jiffies_at_index(i)))
-+			return -ETIMEDOUT;
-+		if (!wg_ratelimiter_allow(skb6, &init_net))
-+			return -EXFULL;
-+		++(*test);
-+
-+		hdr6->saddr.in6_u.u6_addr32[0] =
-+			htonl(ntohl(hdr6->saddr.in6_u.u6_addr32[0]) - i - 1);
-+
-+		if (time_is_before_jiffies(loop_start_time +
-+					   maximum_jiffies_at_index(i)))
-+			return -ETIMEDOUT;
-+#endif
-+	}
-+	return 0;
-+}
-+
-+static __init int capacity_test(struct sk_buff *skb4, struct iphdr *hdr4,
-+				int *test)
-+{
-+	int i;
-+
-+	wg_ratelimiter_gc_entries(NULL);
-+	rcu_barrier();
-+
-+	if (atomic_read(&total_entries))
-+		return -EXFULL;
-+	++(*test);
-+
-+	for (i = 0; i <= max_entries; ++i) {
-+		hdr4->saddr = htonl(i);
-+		if (wg_ratelimiter_allow(skb4, &init_net) != (i != max_entries))
-+			return -EXFULL;
-+		++(*test);
-+	}
-+	return 0;
-+}
-+
-+bool __init wg_ratelimiter_selftest(void)
-+{
-+	enum { TRIALS_BEFORE_GIVING_UP = 5000 };
-+	bool success = false;
-+	int test = 0, trials;
-+	struct sk_buff *skb4, *skb6;
-+	struct iphdr *hdr4;
-+	struct ipv6hdr *hdr6;
-+
-+	if (IS_ENABLED(CONFIG_KASAN) || IS_ENABLED(CONFIG_UBSAN))
-+		return true;
-+
-+	BUILD_BUG_ON(MSEC_PER_SEC % PACKETS_PER_SECOND != 0);
-+
-+	if (wg_ratelimiter_init())
-+		goto out;
-+	++test;
-+	if (wg_ratelimiter_init()) {
-+		wg_ratelimiter_uninit();
-+		goto out;
-+	}
-+	++test;
-+	if (wg_ratelimiter_init()) {
-+		wg_ratelimiter_uninit();
-+		wg_ratelimiter_uninit();
-+		goto out;
-+	}
-+	++test;
-+
-+	skb4 = alloc_skb(sizeof(struct iphdr), GFP_KERNEL);
-+	if (unlikely(!skb4))
-+		goto err_nofree;
-+	skb4->protocol = htons(ETH_P_IP);
-+	hdr4 = (struct iphdr *)skb_put(skb4, sizeof(*hdr4));
-+	hdr4->saddr = htonl(8182);
-+	skb_reset_network_header(skb4);
-+	++test;
-+
-+#if IS_ENABLED(CONFIG_IPV6)
-+	skb6 = alloc_skb(sizeof(struct ipv6hdr), GFP_KERNEL);
-+	if (unlikely(!skb6)) {
-+		kfree_skb(skb4);
-+		goto err_nofree;
-+	}
-+	skb6->protocol = htons(ETH_P_IPV6);
-+	hdr6 = (struct ipv6hdr *)skb_put(skb6, sizeof(*hdr6));
-+	hdr6->saddr.in6_u.u6_addr32[0] = htonl(1212);
-+	hdr6->saddr.in6_u.u6_addr32[1] = htonl(289188);
-+	skb_reset_network_header(skb6);
-+	++test;
-+#endif
-+
-+	for (trials = TRIALS_BEFORE_GIVING_UP;;) {
-+		int test_count = 0, ret;
-+
-+		ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count);
-+		if (ret == -ETIMEDOUT) {
-+			if (!trials--) {
-+				test += test_count;
-+				goto err;
-+			}
-+			msleep(500);
-+			continue;
-+		} else if (ret < 0) {
-+			test += test_count;
-+			goto err;
-+		} else {
-+			test += test_count;
-+			break;
-+		}
-+	}
-+
-+	for (trials = TRIALS_BEFORE_GIVING_UP;;) {
-+		int test_count = 0;
-+
-+		if (capacity_test(skb4, hdr4, &test_count) < 0) {
-+			if (!trials--) {
-+				test += test_count;
-+				goto err;
-+			}
-+			msleep(50);
-+			continue;
-+		}
-+		test += test_count;
-+		break;
-+	}
-+
-+	success = true;
-+
-+err:
-+	kfree_skb(skb4);
-+#if IS_ENABLED(CONFIG_IPV6)
-+	kfree_skb(skb6);
-+#endif
-+err_nofree:
-+	wg_ratelimiter_uninit();
-+	wg_ratelimiter_uninit();
-+	wg_ratelimiter_uninit();
-+	/* Uninit one extra time to check underflow detection. */
-+	wg_ratelimiter_uninit();
-+out:
-+	if (success)
-+		pr_info("ratelimiter self-tests: pass\n");
-+	else
-+		pr_err("ratelimiter self-test %d: FAIL\n", test);
-+
-+	return success;
-+}
-+#endif
---- /dev/null
-+++ b/drivers/net/wireguard/send.c
-@@ -0,0 +1,413 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include "queueing.h"
-+#include "timers.h"
-+#include "device.h"
-+#include "peer.h"
-+#include "socket.h"
-+#include "messages.h"
-+#include "cookie.h"
-+
-+#include <linux/uio.h>
-+#include <linux/inetdevice.h>
-+#include <linux/socket.h>
-+#include <net/ip_tunnels.h>
-+#include <net/udp.h>
-+#include <net/sock.h>
-+
-+static void wg_packet_send_handshake_initiation(struct wg_peer *peer)
-+{
-+	struct message_handshake_initiation packet;
-+
-+	if (!wg_birthdate_has_expired(atomic64_read(&peer->last_sent_handshake),
-+				      REKEY_TIMEOUT))
-+		return; /* This function is rate limited. */
-+
-+	atomic64_set(&peer->last_sent_handshake, ktime_get_coarse_boottime_ns());
-+	net_dbg_ratelimited("%s: Sending handshake initiation to peer %llu (%pISpfsc)\n",
-+			    peer->device->dev->name, peer->internal_id,
-+			    &peer->endpoint.addr);
-+
-+	if (wg_noise_handshake_create_initiation(&packet, &peer->handshake)) {
-+		wg_cookie_add_mac_to_packet(&packet, sizeof(packet), peer);
-+		wg_timers_any_authenticated_packet_traversal(peer);
-+		wg_timers_any_authenticated_packet_sent(peer);
-+		atomic64_set(&peer->last_sent_handshake,
-+			     ktime_get_coarse_boottime_ns());
-+		wg_socket_send_buffer_to_peer(peer, &packet, sizeof(packet),
-+					      HANDSHAKE_DSCP);
-+		wg_timers_handshake_initiated(peer);
-+	}
-+}
-+
-+void wg_packet_handshake_send_worker(struct work_struct *work)
-+{
-+	struct wg_peer *peer = container_of(work, struct wg_peer,
-+					    transmit_handshake_work);
-+
-+	wg_packet_send_handshake_initiation(peer);
-+	wg_peer_put(peer);
-+}
-+
-+void wg_packet_send_queued_handshake_initiation(struct wg_peer *peer,
-+						bool is_retry)
-+{
-+	if (!is_retry)
-+		peer->timer_handshake_attempts = 0;
-+
-+	rcu_read_lock_bh();
-+	/* We check last_sent_handshake here in addition to the actual function
-+	 * we're queueing up, so that we don't queue things if not strictly
-+	 * necessary:
-+	 */
-+	if (!wg_birthdate_has_expired(atomic64_read(&peer->last_sent_handshake),
-+				      REKEY_TIMEOUT) ||
-+			unlikely(READ_ONCE(peer->is_dead)))
-+		goto out;
-+
-+	wg_peer_get(peer);
-+	/* Queues up calling packet_send_queued_handshakes(peer), where we do a
-+	 * peer_put(peer) after:
-+	 */
-+	if (!queue_work(peer->device->handshake_send_wq,
-+			&peer->transmit_handshake_work))
-+		/* If the work was already queued, we want to drop the
-+		 * extra reference:
-+		 */
-+		wg_peer_put(peer);
-+out:
-+	rcu_read_unlock_bh();
-+}
-+
-+void wg_packet_send_handshake_response(struct wg_peer *peer)
-+{
-+	struct message_handshake_response packet;
-+
-+	atomic64_set(&peer->last_sent_handshake, ktime_get_coarse_boottime_ns());
-+	net_dbg_ratelimited("%s: Sending handshake response to peer %llu (%pISpfsc)\n",
-+			    peer->device->dev->name, peer->internal_id,
-+			    &peer->endpoint.addr);
-+
-+	if (wg_noise_handshake_create_response(&packet, &peer->handshake)) {
-+		wg_cookie_add_mac_to_packet(&packet, sizeof(packet), peer);
-+		if (wg_noise_handshake_begin_session(&peer->handshake,
-+						     &peer->keypairs)) {
-+			wg_timers_session_derived(peer);
-+			wg_timers_any_authenticated_packet_traversal(peer);
-+			wg_timers_any_authenticated_packet_sent(peer);
-+			atomic64_set(&peer->last_sent_handshake,
-+				     ktime_get_coarse_boottime_ns());
-+			wg_socket_send_buffer_to_peer(peer, &packet,
-+						      sizeof(packet),
-+						      HANDSHAKE_DSCP);
-+		}
-+	}
-+}
-+
-+void wg_packet_send_handshake_cookie(struct wg_device *wg,
-+				     struct sk_buff *initiating_skb,
-+				     __le32 sender_index)
-+{
-+	struct message_handshake_cookie packet;
-+
-+	net_dbg_skb_ratelimited("%s: Sending cookie response for denied handshake message for %pISpfsc\n",
-+				wg->dev->name, initiating_skb);
-+	wg_cookie_message_create(&packet, initiating_skb, sender_index,
-+				 &wg->cookie_checker);
-+	wg_socket_send_buffer_as_reply_to_skb(wg, initiating_skb, &packet,
-+					      sizeof(packet));
-+}
-+
-+static void keep_key_fresh(struct wg_peer *peer)
-+{
-+	struct noise_keypair *keypair;
-+	bool send = false;
-+
-+	rcu_read_lock_bh();
-+	keypair = rcu_dereference_bh(peer->keypairs.current_keypair);
-+	if (likely(keypair && READ_ONCE(keypair->sending.is_valid)) &&
-+	    (unlikely(atomic64_read(&keypair->sending.counter.counter) >
-+		      REKEY_AFTER_MESSAGES) ||
-+	     (keypair->i_am_the_initiator &&
-+	      unlikely(wg_birthdate_has_expired(keypair->sending.birthdate,
-+						REKEY_AFTER_TIME)))))
-+		send = true;
-+	rcu_read_unlock_bh();
-+
-+	if (send)
-+		wg_packet_send_queued_handshake_initiation(peer, false);
-+}
-+
-+static unsigned int calculate_skb_padding(struct sk_buff *skb)
-+{
-+	/* We do this modulo business with the MTU, just in case the networking
-+	 * layer gives us a packet that's bigger than the MTU. In that case, we
-+	 * wouldn't want the final subtraction to overflow in the case of the
-+	 * padded_size being clamped.
-+	 */
-+	unsigned int last_unit = skb->len % PACKET_CB(skb)->mtu;
-+	unsigned int padded_size = ALIGN(last_unit, MESSAGE_PADDING_MULTIPLE);
-+
-+	if (padded_size > PACKET_CB(skb)->mtu)
-+		padded_size = PACKET_CB(skb)->mtu;
-+	return padded_size - last_unit;
-+}
-+
-+static bool encrypt_packet(struct sk_buff *skb, struct noise_keypair *keypair)
-+{
-+	unsigned int padding_len, plaintext_len, trailer_len;
-+	struct scatterlist sg[MAX_SKB_FRAGS + 8];
-+	struct message_data *header;
-+	struct sk_buff *trailer;
-+	int num_frags;
-+
-+	/* Calculate lengths. */
-+	padding_len = calculate_skb_padding(skb);
-+	trailer_len = padding_len + noise_encrypted_len(0);
-+	plaintext_len = skb->len + padding_len;
-+
-+	/* Expand data section to have room for padding and auth tag. */
-+	num_frags = skb_cow_data(skb, trailer_len, &trailer);
-+	if (unlikely(num_frags < 0 || num_frags > ARRAY_SIZE(sg)))
-+		return false;
-+
-+	/* Set the padding to zeros, and make sure it and the auth tag are part
-+	 * of the skb.
-+	 */
-+	memset(skb_tail_pointer(trailer), 0, padding_len);
-+
-+	/* Expand head section to have room for our header and the network
-+	 * stack's headers.
-+	 */
-+	if (unlikely(skb_cow_head(skb, DATA_PACKET_HEAD_ROOM) < 0))
-+		return false;
-+
-+	/* Finalize checksum calculation for the inner packet, if required. */
-+	if (unlikely(skb->ip_summed == CHECKSUM_PARTIAL &&
-+		     skb_checksum_help(skb)))
-+		return false;
-+
-+	/* Only after checksumming can we safely add on the padding at the end
-+	 * and the header.
-+	 */
-+	skb_set_inner_network_header(skb, 0);
-+	header = (struct message_data *)skb_push(skb, sizeof(*header));
-+	header->header.type = cpu_to_le32(MESSAGE_DATA);
-+	header->key_idx = keypair->remote_index;
-+	header->counter = cpu_to_le64(PACKET_CB(skb)->nonce);
-+	pskb_put(skb, trailer, trailer_len);
-+
-+	/* Now we can encrypt the scattergather segments */
-+	sg_init_table(sg, num_frags);
-+	if (skb_to_sgvec(skb, sg, sizeof(struct message_data),
-+			 noise_encrypted_len(plaintext_len)) <= 0)
-+		return false;
-+	return chacha20poly1305_encrypt_sg_inplace(sg, plaintext_len, NULL, 0,
-+						   PACKET_CB(skb)->nonce,
-+						   keypair->sending.key);
-+}
-+
-+void wg_packet_send_keepalive(struct wg_peer *peer)
-+{
-+	struct sk_buff *skb;
-+
-+	if (skb_queue_empty(&peer->staged_packet_queue)) {
-+		skb = alloc_skb(DATA_PACKET_HEAD_ROOM + MESSAGE_MINIMUM_LENGTH,
-+				GFP_ATOMIC);
-+		if (unlikely(!skb))
-+			return;
-+		skb_reserve(skb, DATA_PACKET_HEAD_ROOM);
-+		skb->dev = peer->device->dev;
-+		PACKET_CB(skb)->mtu = skb->dev->mtu;
-+		skb_queue_tail(&peer->staged_packet_queue, skb);
-+		net_dbg_ratelimited("%s: Sending keepalive packet to peer %llu (%pISpfsc)\n",
-+				    peer->device->dev->name, peer->internal_id,
-+				    &peer->endpoint.addr);
-+	}
-+
-+	wg_packet_send_staged_packets(peer);
-+}
-+
-+static void wg_packet_create_data_done(struct sk_buff *first,
-+				       struct wg_peer *peer)
-+{
-+	struct sk_buff *skb, *next;
-+	bool is_keepalive, data_sent = false;
-+
-+	wg_timers_any_authenticated_packet_traversal(peer);
-+	wg_timers_any_authenticated_packet_sent(peer);
-+	skb_list_walk_safe(first, skb, next) {
-+		is_keepalive = skb->len == message_data_len(0);
-+		if (likely(!wg_socket_send_skb_to_peer(peer, skb,
-+				PACKET_CB(skb)->ds) && !is_keepalive))
-+			data_sent = true;
-+	}
-+
-+	if (likely(data_sent))
-+		wg_timers_data_sent(peer);
-+
-+	keep_key_fresh(peer);
-+}
-+
-+void wg_packet_tx_worker(struct work_struct *work)
-+{
-+	struct crypt_queue *queue = container_of(work, struct crypt_queue,
-+						 work);
-+	struct noise_keypair *keypair;
-+	enum packet_state state;
-+	struct sk_buff *first;
-+	struct wg_peer *peer;
-+
-+	while ((first = __ptr_ring_peek(&queue->ring)) != NULL &&
-+	       (state = atomic_read_acquire(&PACKET_CB(first)->state)) !=
-+		       PACKET_STATE_UNCRYPTED) {
-+		__ptr_ring_discard_one(&queue->ring);
-+		peer = PACKET_PEER(first);
-+		keypair = PACKET_CB(first)->keypair;
-+
-+		if (likely(state == PACKET_STATE_CRYPTED))
-+			wg_packet_create_data_done(first, peer);
-+		else
-+			kfree_skb_list(first);
-+
-+		wg_noise_keypair_put(keypair, false);
-+		wg_peer_put(peer);
-+	}
-+}
-+
-+void wg_packet_encrypt_worker(struct work_struct *work)
-+{
-+	struct crypt_queue *queue = container_of(work, struct multicore_worker,
-+						 work)->ptr;
-+	struct sk_buff *first, *skb, *next;
-+
-+	while ((first = ptr_ring_consume_bh(&queue->ring)) != NULL) {
-+		enum packet_state state = PACKET_STATE_CRYPTED;
-+
-+		skb_list_walk_safe(first, skb, next) {
-+			if (likely(encrypt_packet(skb,
-+					PACKET_CB(first)->keypair))) {
-+				wg_reset_packet(skb);
-+			} else {
-+				state = PACKET_STATE_DEAD;
-+				break;
-+			}
-+		}
-+		wg_queue_enqueue_per_peer(&PACKET_PEER(first)->tx_queue, first,
-+					  state);
-+
-+	}
-+}
-+
-+static void wg_packet_create_data(struct sk_buff *first)
-+{
-+	struct wg_peer *peer = PACKET_PEER(first);
-+	struct wg_device *wg = peer->device;
-+	int ret = -EINVAL;
-+
-+	rcu_read_lock_bh();
-+	if (unlikely(READ_ONCE(peer->is_dead)))
-+		goto err;
-+
-+	ret = wg_queue_enqueue_per_device_and_peer(&wg->encrypt_queue,
-+						   &peer->tx_queue, first,
-+						   wg->packet_crypt_wq,
-+						   &wg->encrypt_queue.last_cpu);
-+	if (unlikely(ret == -EPIPE))
-+		wg_queue_enqueue_per_peer(&peer->tx_queue, first,
-+					  PACKET_STATE_DEAD);
-+err:
-+	rcu_read_unlock_bh();
-+	if (likely(!ret || ret == -EPIPE))
-+		return;
-+	wg_noise_keypair_put(PACKET_CB(first)->keypair, false);
-+	wg_peer_put(peer);
-+	kfree_skb_list(first);
-+}
-+
-+void wg_packet_purge_staged_packets(struct wg_peer *peer)
-+{
-+	spin_lock_bh(&peer->staged_packet_queue.lock);
-+	peer->device->dev->stats.tx_dropped += peer->staged_packet_queue.qlen;
-+	__skb_queue_purge(&peer->staged_packet_queue);
-+	spin_unlock_bh(&peer->staged_packet_queue.lock);
-+}
-+
-+void wg_packet_send_staged_packets(struct wg_peer *peer)
-+{
-+	struct noise_symmetric_key *key;
-+	struct noise_keypair *keypair;
-+	struct sk_buff_head packets;
-+	struct sk_buff *skb;
-+
-+	/* Steal the current queue into our local one. */
-+	__skb_queue_head_init(&packets);
-+	spin_lock_bh(&peer->staged_packet_queue.lock);
-+	skb_queue_splice_init(&peer->staged_packet_queue, &packets);
-+	spin_unlock_bh(&peer->staged_packet_queue.lock);
-+	if (unlikely(skb_queue_empty(&packets)))
-+		return;
-+
-+	/* First we make sure we have a valid reference to a valid key. */
-+	rcu_read_lock_bh();
-+	keypair = wg_noise_keypair_get(
-+		rcu_dereference_bh(peer->keypairs.current_keypair));
-+	rcu_read_unlock_bh();
-+	if (unlikely(!keypair))
-+		goto out_nokey;
-+	key = &keypair->sending;
-+	if (unlikely(!READ_ONCE(key->is_valid)))
-+		goto out_nokey;
-+	if (unlikely(wg_birthdate_has_expired(key->birthdate,
-+					      REJECT_AFTER_TIME)))
-+		goto out_invalid;
-+
-+	/* After we know we have a somewhat valid key, we now try to assign
-+	 * nonces to all of the packets in the queue. If we can't assign nonces
-+	 * for all of them, we just consider it a failure and wait for the next
-+	 * handshake.
-+	 */
-+	skb_queue_walk(&packets, skb) {
-+		/* 0 for no outer TOS: no leak. TODO: at some later point, we
-+		 * might consider using flowi->tos as outer instead.
-+		 */
-+		PACKET_CB(skb)->ds = ip_tunnel_ecn_encap(0, ip_hdr(skb), skb);
-+		PACKET_CB(skb)->nonce =
-+				atomic64_inc_return(&key->counter.counter) - 1;
-+		if (unlikely(PACKET_CB(skb)->nonce >= REJECT_AFTER_MESSAGES))
-+			goto out_invalid;
-+	}
-+
-+	packets.prev->next = NULL;
-+	wg_peer_get(keypair->entry.peer);
-+	PACKET_CB(packets.next)->keypair = keypair;
-+	wg_packet_create_data(packets.next);
-+	return;
-+
-+out_invalid:
-+	WRITE_ONCE(key->is_valid, false);
-+out_nokey:
-+	wg_noise_keypair_put(keypair, false);
-+
-+	/* We orphan the packets if we're waiting on a handshake, so that they
-+	 * don't block a socket's pool.
-+	 */
-+	skb_queue_walk(&packets, skb)
-+		skb_orphan(skb);
-+	/* Then we put them back on the top of the queue. We're not too
-+	 * concerned about accidentally getting things a little out of order if
-+	 * packets are being added really fast, because this queue is for before
-+	 * packets can even be sent and it's small anyway.
-+	 */
-+	spin_lock_bh(&peer->staged_packet_queue.lock);
-+	skb_queue_splice(&packets, &peer->staged_packet_queue);
-+	spin_unlock_bh(&peer->staged_packet_queue.lock);
-+
-+	/* If we're exiting because there's something wrong with the key, it
-+	 * means we should initiate a new handshake.
-+	 */
-+	wg_packet_send_queued_handshake_initiation(peer, false);
-+}
---- /dev/null
-+++ b/drivers/net/wireguard/socket.c
-@@ -0,0 +1,437 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include "device.h"
-+#include "peer.h"
-+#include "socket.h"
-+#include "queueing.h"
-+#include "messages.h"
-+
-+#include <linux/ctype.h>
-+#include <linux/net.h>
-+#include <linux/if_vlan.h>
-+#include <linux/if_ether.h>
-+#include <linux/inetdevice.h>
-+#include <net/udp_tunnel.h>
-+#include <net/ipv6.h>
-+
-+static int send4(struct wg_device *wg, struct sk_buff *skb,
-+		 struct endpoint *endpoint, u8 ds, struct dst_cache *cache)
-+{
-+	struct flowi4 fl = {
-+		.saddr = endpoint->src4.s_addr,
-+		.daddr = endpoint->addr4.sin_addr.s_addr,
-+		.fl4_dport = endpoint->addr4.sin_port,
-+		.flowi4_mark = wg->fwmark,
-+		.flowi4_proto = IPPROTO_UDP
-+	};
-+	struct rtable *rt = NULL;
-+	struct sock *sock;
-+	int ret = 0;
-+
-+	skb_mark_not_on_list(skb);
-+	skb->dev = wg->dev;
-+	skb->mark = wg->fwmark;
-+
-+	rcu_read_lock_bh();
-+	sock = rcu_dereference_bh(wg->sock4);
-+
-+	if (unlikely(!sock)) {
-+		ret = -ENONET;
-+		goto err;
-+	}
-+
-+	fl.fl4_sport = inet_sk(sock)->inet_sport;
-+
-+	if (cache)
-+		rt = dst_cache_get_ip4(cache, &fl.saddr);
-+
-+	if (!rt) {
-+		security_sk_classify_flow(sock, flowi4_to_flowi(&fl));
-+		if (unlikely(!inet_confirm_addr(sock_net(sock), NULL, 0,
-+						fl.saddr, RT_SCOPE_HOST))) {
-+			endpoint->src4.s_addr = 0;
-+			*(__force __be32 *)&endpoint->src_if4 = 0;
-+			fl.saddr = 0;
-+			if (cache)
-+				dst_cache_reset(cache);
-+		}
-+		rt = ip_route_output_flow(sock_net(sock), &fl, sock);
-+		if (unlikely(endpoint->src_if4 && ((IS_ERR(rt) &&
-+			     PTR_ERR(rt) == -EINVAL) || (!IS_ERR(rt) &&
-+			     rt->dst.dev->ifindex != endpoint->src_if4)))) {
-+			endpoint->src4.s_addr = 0;
-+			*(__force __be32 *)&endpoint->src_if4 = 0;
-+			fl.saddr = 0;
-+			if (cache)
-+				dst_cache_reset(cache);
-+			if (!IS_ERR(rt))
-+				ip_rt_put(rt);
-+			rt = ip_route_output_flow(sock_net(sock), &fl, sock);
-+		}
-+		if (unlikely(IS_ERR(rt))) {
-+			ret = PTR_ERR(rt);
-+			net_dbg_ratelimited("%s: No route to %pISpfsc, error %d\n",
-+					    wg->dev->name, &endpoint->addr, ret);
-+			goto err;
-+		} else if (unlikely(rt->dst.dev == skb->dev)) {
-+			ip_rt_put(rt);
-+			ret = -ELOOP;
-+			net_dbg_ratelimited("%s: Avoiding routing loop to %pISpfsc\n",
-+					    wg->dev->name, &endpoint->addr);
-+			goto err;
-+		}
-+		if (cache)
-+			dst_cache_set_ip4(cache, &rt->dst, fl.saddr);
-+	}
-+
-+	skb->ignore_df = 1;
-+	udp_tunnel_xmit_skb(rt, sock, skb, fl.saddr, fl.daddr, ds,
-+			    ip4_dst_hoplimit(&rt->dst), 0, fl.fl4_sport,
-+			    fl.fl4_dport, false, false);
-+	goto out;
-+
-+err:
-+	kfree_skb(skb);
-+out:
-+	rcu_read_unlock_bh();
-+	return ret;
-+}
-+
-+static int send6(struct wg_device *wg, struct sk_buff *skb,
-+		 struct endpoint *endpoint, u8 ds, struct dst_cache *cache)
-+{
-+#if IS_ENABLED(CONFIG_IPV6)
-+	struct flowi6 fl = {
-+		.saddr = endpoint->src6,
-+		.daddr = endpoint->addr6.sin6_addr,
-+		.fl6_dport = endpoint->addr6.sin6_port,
-+		.flowi6_mark = wg->fwmark,
-+		.flowi6_oif = endpoint->addr6.sin6_scope_id,
-+		.flowi6_proto = IPPROTO_UDP
-+		/* TODO: addr->sin6_flowinfo */
-+	};
-+	struct dst_entry *dst = NULL;
-+	struct sock *sock;
-+	int ret = 0;
-+
-+	skb_mark_not_on_list(skb);
-+	skb->dev = wg->dev;
-+	skb->mark = wg->fwmark;
-+
-+	rcu_read_lock_bh();
-+	sock = rcu_dereference_bh(wg->sock6);
-+
-+	if (unlikely(!sock)) {
-+		ret = -ENONET;
-+		goto err;
-+	}
-+
-+	fl.fl6_sport = inet_sk(sock)->inet_sport;
-+
-+	if (cache)
-+		dst = dst_cache_get_ip6(cache, &fl.saddr);
-+
-+	if (!dst) {
-+		security_sk_classify_flow(sock, flowi6_to_flowi(&fl));
-+		if (unlikely(!ipv6_addr_any(&fl.saddr) &&
-+			     !ipv6_chk_addr(sock_net(sock), &fl.saddr, NULL, 0))) {
-+			endpoint->src6 = fl.saddr = in6addr_any;
-+			if (cache)
-+				dst_cache_reset(cache);
-+		}
-+		dst = ipv6_stub->ipv6_dst_lookup_flow(sock_net(sock), sock, &fl,
-+						      NULL);
-+		if (unlikely(IS_ERR(dst))) {
-+			ret = PTR_ERR(dst);
-+			net_dbg_ratelimited("%s: No route to %pISpfsc, error %d\n",
-+					    wg->dev->name, &endpoint->addr, ret);
-+			goto err;
-+		} else if (unlikely(dst->dev == skb->dev)) {
-+			dst_release(dst);
-+			ret = -ELOOP;
-+			net_dbg_ratelimited("%s: Avoiding routing loop to %pISpfsc\n",
-+					    wg->dev->name, &endpoint->addr);
-+			goto err;
-+		}
-+		if (cache)
-+			dst_cache_set_ip6(cache, dst, &fl.saddr);
-+	}
-+
-+	skb->ignore_df = 1;
-+	udp_tunnel6_xmit_skb(dst, sock, skb, skb->dev, &fl.saddr, &fl.daddr, ds,
-+			     ip6_dst_hoplimit(dst), 0, fl.fl6_sport,
-+			     fl.fl6_dport, false);
-+	goto out;
-+
-+err:
-+	kfree_skb(skb);
-+out:
-+	rcu_read_unlock_bh();
-+	return ret;
-+#else
-+	return -EAFNOSUPPORT;
-+#endif
-+}
-+
-+int wg_socket_send_skb_to_peer(struct wg_peer *peer, struct sk_buff *skb, u8 ds)
-+{
-+	size_t skb_len = skb->len;
-+	int ret = -EAFNOSUPPORT;
-+
-+	read_lock_bh(&peer->endpoint_lock);
-+	if (peer->endpoint.addr.sa_family == AF_INET)
-+		ret = send4(peer->device, skb, &peer->endpoint, ds,
-+			    &peer->endpoint_cache);
-+	else if (peer->endpoint.addr.sa_family == AF_INET6)
-+		ret = send6(peer->device, skb, &peer->endpoint, ds,
-+			    &peer->endpoint_cache);
-+	else
-+		dev_kfree_skb(skb);
-+	if (likely(!ret))
-+		peer->tx_bytes += skb_len;
-+	read_unlock_bh(&peer->endpoint_lock);
-+
-+	return ret;
-+}
-+
-+int wg_socket_send_buffer_to_peer(struct wg_peer *peer, void *buffer,
-+				  size_t len, u8 ds)
-+{
-+	struct sk_buff *skb = alloc_skb(len + SKB_HEADER_LEN, GFP_ATOMIC);
-+
-+	if (unlikely(!skb))
-+		return -ENOMEM;
-+
-+	skb_reserve(skb, SKB_HEADER_LEN);
-+	skb_set_inner_network_header(skb, 0);
-+	skb_put_data(skb, buffer, len);
-+	return wg_socket_send_skb_to_peer(peer, skb, ds);
-+}
-+
-+int wg_socket_send_buffer_as_reply_to_skb(struct wg_device *wg,
-+					  struct sk_buff *in_skb, void *buffer,
-+					  size_t len)
-+{
-+	int ret = 0;
-+	struct sk_buff *skb;
-+	struct endpoint endpoint;
-+
-+	if (unlikely(!in_skb))
-+		return -EINVAL;
-+	ret = wg_socket_endpoint_from_skb(&endpoint, in_skb);
-+	if (unlikely(ret < 0))
-+		return ret;
-+
-+	skb = alloc_skb(len + SKB_HEADER_LEN, GFP_ATOMIC);
-+	if (unlikely(!skb))
-+		return -ENOMEM;
-+	skb_reserve(skb, SKB_HEADER_LEN);
-+	skb_set_inner_network_header(skb, 0);
-+	skb_put_data(skb, buffer, len);
-+
-+	if (endpoint.addr.sa_family == AF_INET)
-+		ret = send4(wg, skb, &endpoint, 0, NULL);
-+	else if (endpoint.addr.sa_family == AF_INET6)
-+		ret = send6(wg, skb, &endpoint, 0, NULL);
-+	/* No other possibilities if the endpoint is valid, which it is,
-+	 * as we checked above.
-+	 */
-+
-+	return ret;
-+}
-+
-+int wg_socket_endpoint_from_skb(struct endpoint *endpoint,
-+				const struct sk_buff *skb)
-+{
-+	memset(endpoint, 0, sizeof(*endpoint));
-+	if (skb->protocol == htons(ETH_P_IP)) {
-+		endpoint->addr4.sin_family = AF_INET;
-+		endpoint->addr4.sin_port = udp_hdr(skb)->source;
-+		endpoint->addr4.sin_addr.s_addr = ip_hdr(skb)->saddr;
-+		endpoint->src4.s_addr = ip_hdr(skb)->daddr;
-+		endpoint->src_if4 = skb->skb_iif;
-+	} else if (skb->protocol == htons(ETH_P_IPV6)) {
-+		endpoint->addr6.sin6_family = AF_INET6;
-+		endpoint->addr6.sin6_port = udp_hdr(skb)->source;
-+		endpoint->addr6.sin6_addr = ipv6_hdr(skb)->saddr;
-+		endpoint->addr6.sin6_scope_id = ipv6_iface_scope_id(
-+			&ipv6_hdr(skb)->saddr, skb->skb_iif);
-+		endpoint->src6 = ipv6_hdr(skb)->daddr;
-+	} else {
-+		return -EINVAL;
-+	}
-+	return 0;
-+}
-+
-+static bool endpoint_eq(const struct endpoint *a, const struct endpoint *b)
-+{
-+	return (a->addr.sa_family == AF_INET && b->addr.sa_family == AF_INET &&
-+		a->addr4.sin_port == b->addr4.sin_port &&
-+		a->addr4.sin_addr.s_addr == b->addr4.sin_addr.s_addr &&
-+		a->src4.s_addr == b->src4.s_addr && a->src_if4 == b->src_if4) ||
-+	       (a->addr.sa_family == AF_INET6 &&
-+		b->addr.sa_family == AF_INET6 &&
-+		a->addr6.sin6_port == b->addr6.sin6_port &&
-+		ipv6_addr_equal(&a->addr6.sin6_addr, &b->addr6.sin6_addr) &&
-+		a->addr6.sin6_scope_id == b->addr6.sin6_scope_id &&
-+		ipv6_addr_equal(&a->src6, &b->src6)) ||
-+	       unlikely(!a->addr.sa_family && !b->addr.sa_family);
-+}
-+
-+void wg_socket_set_peer_endpoint(struct wg_peer *peer,
-+				 const struct endpoint *endpoint)
-+{
-+	/* First we check unlocked, in order to optimize, since it's pretty rare
-+	 * that an endpoint will change. If we happen to be mid-write, and two
-+	 * CPUs wind up writing the same thing or something slightly different,
-+	 * it doesn't really matter much either.
-+	 */
-+	if (endpoint_eq(endpoint, &peer->endpoint))
-+		return;
-+	write_lock_bh(&peer->endpoint_lock);
-+	if (endpoint->addr.sa_family == AF_INET) {
-+		peer->endpoint.addr4 = endpoint->addr4;
-+		peer->endpoint.src4 = endpoint->src4;
-+		peer->endpoint.src_if4 = endpoint->src_if4;
-+	} else if (endpoint->addr.sa_family == AF_INET6) {
-+		peer->endpoint.addr6 = endpoint->addr6;
-+		peer->endpoint.src6 = endpoint->src6;
-+	} else {
-+		goto out;
-+	}
-+	dst_cache_reset(&peer->endpoint_cache);
-+out:
-+	write_unlock_bh(&peer->endpoint_lock);
-+}
-+
-+void wg_socket_set_peer_endpoint_from_skb(struct wg_peer *peer,
-+					  const struct sk_buff *skb)
-+{
-+	struct endpoint endpoint;
-+
-+	if (!wg_socket_endpoint_from_skb(&endpoint, skb))
-+		wg_socket_set_peer_endpoint(peer, &endpoint);
-+}
-+
-+void wg_socket_clear_peer_endpoint_src(struct wg_peer *peer)
-+{
-+	write_lock_bh(&peer->endpoint_lock);
-+	memset(&peer->endpoint.src6, 0, sizeof(peer->endpoint.src6));
-+	dst_cache_reset(&peer->endpoint_cache);
-+	write_unlock_bh(&peer->endpoint_lock);
-+}
-+
-+static int wg_receive(struct sock *sk, struct sk_buff *skb)
-+{
-+	struct wg_device *wg;
-+
-+	if (unlikely(!sk))
-+		goto err;
-+	wg = sk->sk_user_data;
-+	if (unlikely(!wg))
-+		goto err;
-+	wg_packet_receive(wg, skb);
-+	return 0;
-+
-+err:
-+	kfree_skb(skb);
-+	return 0;
-+}
-+
-+static void sock_free(struct sock *sock)
-+{
-+	if (unlikely(!sock))
-+		return;
-+	sk_clear_memalloc(sock);
-+	udp_tunnel_sock_release(sock->sk_socket);
-+}
-+
-+static void set_sock_opts(struct socket *sock)
-+{
-+	sock->sk->sk_allocation = GFP_ATOMIC;
-+	sock->sk->sk_sndbuf = INT_MAX;
-+	sk_set_memalloc(sock->sk);
-+}
-+
-+int wg_socket_init(struct wg_device *wg, u16 port)
-+{
-+	int ret;
-+	struct udp_tunnel_sock_cfg cfg = {
-+		.sk_user_data = wg,
-+		.encap_type = 1,
-+		.encap_rcv = wg_receive
-+	};
-+	struct socket *new4 = NULL, *new6 = NULL;
-+	struct udp_port_cfg port4 = {
-+		.family = AF_INET,
-+		.local_ip.s_addr = htonl(INADDR_ANY),
-+		.local_udp_port = htons(port),
-+		.use_udp_checksums = true
-+	};
-+#if IS_ENABLED(CONFIG_IPV6)
-+	int retries = 0;
-+	struct udp_port_cfg port6 = {
-+		.family = AF_INET6,
-+		.local_ip6 = IN6ADDR_ANY_INIT,
-+		.use_udp6_tx_checksums = true,
-+		.use_udp6_rx_checksums = true,
-+		.ipv6_v6only = true
-+	};
-+#endif
-+
-+#if IS_ENABLED(CONFIG_IPV6)
-+retry:
-+#endif
-+
-+	ret = udp_sock_create(wg->creating_net, &port4, &new4);
-+	if (ret < 0) {
-+		pr_err("%s: Could not create IPv4 socket\n", wg->dev->name);
-+		return ret;
-+	}
-+	set_sock_opts(new4);
-+	setup_udp_tunnel_sock(wg->creating_net, new4, &cfg);
-+
-+#if IS_ENABLED(CONFIG_IPV6)
-+	if (ipv6_mod_enabled()) {
-+		port6.local_udp_port = inet_sk(new4->sk)->inet_sport;
-+		ret = udp_sock_create(wg->creating_net, &port6, &new6);
-+		if (ret < 0) {
-+			udp_tunnel_sock_release(new4);
-+			if (ret == -EADDRINUSE && !port && retries++ < 100)
-+				goto retry;
-+			pr_err("%s: Could not create IPv6 socket\n",
-+			       wg->dev->name);
-+			return ret;
-+		}
-+		set_sock_opts(new6);
-+		setup_udp_tunnel_sock(wg->creating_net, new6, &cfg);
-+	}
-+#endif
-+
-+	wg_socket_reinit(wg, new4->sk, new6 ? new6->sk : NULL);
-+	return 0;
-+}
-+
-+void wg_socket_reinit(struct wg_device *wg, struct sock *new4,
-+		      struct sock *new6)
-+{
-+	struct sock *old4, *old6;
-+
-+	mutex_lock(&wg->socket_update_lock);
-+	old4 = rcu_dereference_protected(wg->sock4,
-+				lockdep_is_held(&wg->socket_update_lock));
-+	old6 = rcu_dereference_protected(wg->sock6,
-+				lockdep_is_held(&wg->socket_update_lock));
-+	rcu_assign_pointer(wg->sock4, new4);
-+	rcu_assign_pointer(wg->sock6, new6);
-+	if (new4)
-+		wg->incoming_port = ntohs(inet_sk(new4)->inet_sport);
-+	mutex_unlock(&wg->socket_update_lock);
-+	synchronize_rcu();
-+	synchronize_net();
-+	sock_free(old4);
-+	sock_free(old6);
-+}
---- /dev/null
-+++ b/drivers/net/wireguard/socket.h
-@@ -0,0 +1,44 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifndef _WG_SOCKET_H
-+#define _WG_SOCKET_H
-+
-+#include <linux/netdevice.h>
-+#include <linux/udp.h>
-+#include <linux/if_vlan.h>
-+#include <linux/if_ether.h>
-+
-+int wg_socket_init(struct wg_device *wg, u16 port);
-+void wg_socket_reinit(struct wg_device *wg, struct sock *new4,
-+		      struct sock *new6);
-+int wg_socket_send_buffer_to_peer(struct wg_peer *peer, void *data,
-+				  size_t len, u8 ds);
-+int wg_socket_send_skb_to_peer(struct wg_peer *peer, struct sk_buff *skb,
-+			       u8 ds);
-+int wg_socket_send_buffer_as_reply_to_skb(struct wg_device *wg,
-+					  struct sk_buff *in_skb,
-+					  void *out_buffer, size_t len);
-+
-+int wg_socket_endpoint_from_skb(struct endpoint *endpoint,
-+				const struct sk_buff *skb);
-+void wg_socket_set_peer_endpoint(struct wg_peer *peer,
-+				 const struct endpoint *endpoint);
-+void wg_socket_set_peer_endpoint_from_skb(struct wg_peer *peer,
-+					  const struct sk_buff *skb);
-+void wg_socket_clear_peer_endpoint_src(struct wg_peer *peer);
-+
-+#if defined(CONFIG_DYNAMIC_DEBUG) || defined(DEBUG)
-+#define net_dbg_skb_ratelimited(fmt, dev, skb, ...) do {                       \
-+		struct endpoint __endpoint;                                    \
-+		wg_socket_endpoint_from_skb(&__endpoint, skb);                 \
-+		net_dbg_ratelimited(fmt, dev, &__endpoint.addr,                \
-+				    ##__VA_ARGS__);                            \
-+	} while (0)
-+#else
-+#define net_dbg_skb_ratelimited(fmt, skb, ...)
-+#endif
-+
-+#endif /* _WG_SOCKET_H */
---- /dev/null
-+++ b/drivers/net/wireguard/timers.c
-@@ -0,0 +1,243 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#include "timers.h"
-+#include "device.h"
-+#include "peer.h"
-+#include "queueing.h"
-+#include "socket.h"
-+
-+/*
-+ * - Timer for retransmitting the handshake if we don't hear back after
-+ * `REKEY_TIMEOUT + jitter` ms.
-+ *
-+ * - Timer for sending empty packet if we have received a packet but after have
-+ * not sent one for `KEEPALIVE_TIMEOUT` ms.
-+ *
-+ * - Timer for initiating new handshake if we have sent a packet but after have
-+ * not received one (even empty) for `(KEEPALIVE_TIMEOUT + REKEY_TIMEOUT) +
-+ * jitter` ms.
-+ *
-+ * - Timer for zeroing out all ephemeral keys after `(REJECT_AFTER_TIME * 3)` ms
-+ * if no new keys have been received.
-+ *
-+ * - Timer for, if enabled, sending an empty authenticated packet every user-
-+ * specified seconds.
-+ */
-+
-+static inline void mod_peer_timer(struct wg_peer *peer,
-+				  struct timer_list *timer,
-+				  unsigned long expires)
-+{
-+	rcu_read_lock_bh();
-+	if (likely(netif_running(peer->device->dev) &&
-+		   !READ_ONCE(peer->is_dead)))
-+		mod_timer(timer, expires);
-+	rcu_read_unlock_bh();
-+}
-+
-+static void wg_expired_retransmit_handshake(struct timer_list *timer)
-+{
-+	struct wg_peer *peer = from_timer(peer, timer,
-+					  timer_retransmit_handshake);
-+
-+	if (peer->timer_handshake_attempts > MAX_TIMER_HANDSHAKES) {
-+		pr_debug("%s: Handshake for peer %llu (%pISpfsc) did not complete after %d attempts, giving up\n",
-+			 peer->device->dev->name, peer->internal_id,
-+			 &peer->endpoint.addr, MAX_TIMER_HANDSHAKES + 2);
-+
-+		del_timer(&peer->timer_send_keepalive);
-+		/* We drop all packets without a keypair and don't try again,
-+		 * if we try unsuccessfully for too long to make a handshake.
-+		 */
-+		wg_packet_purge_staged_packets(peer);
-+
-+		/* We set a timer for destroying any residue that might be left
-+		 * of a partial exchange.
-+		 */
-+		if (!timer_pending(&peer->timer_zero_key_material))
-+			mod_peer_timer(peer, &peer->timer_zero_key_material,
-+				       jiffies + REJECT_AFTER_TIME * 3 * HZ);
-+	} else {
-+		++peer->timer_handshake_attempts;
-+		pr_debug("%s: Handshake for peer %llu (%pISpfsc) did not complete after %d seconds, retrying (try %d)\n",
-+			 peer->device->dev->name, peer->internal_id,
-+			 &peer->endpoint.addr, REKEY_TIMEOUT,
-+			 peer->timer_handshake_attempts + 1);
-+
-+		/* We clear the endpoint address src address, in case this is
-+		 * the cause of trouble.
-+		 */
-+		wg_socket_clear_peer_endpoint_src(peer);
-+
-+		wg_packet_send_queued_handshake_initiation(peer, true);
-+	}
-+}
-+
-+static void wg_expired_send_keepalive(struct timer_list *timer)
-+{
-+	struct wg_peer *peer = from_timer(peer, timer, timer_send_keepalive);
-+
-+	wg_packet_send_keepalive(peer);
-+	if (peer->timer_need_another_keepalive) {
-+		peer->timer_need_another_keepalive = false;
-+		mod_peer_timer(peer, &peer->timer_send_keepalive,
-+			       jiffies + KEEPALIVE_TIMEOUT * HZ);
-+	}
-+}
-+
-+static void wg_expired_new_handshake(struct timer_list *timer)
-+{
-+	struct wg_peer *peer = from_timer(peer, timer, timer_new_handshake);
-+
-+	pr_debug("%s: Retrying handshake with peer %llu (%pISpfsc) because we stopped hearing back after %d seconds\n",
-+		 peer->device->dev->name, peer->internal_id,
-+		 &peer->endpoint.addr, KEEPALIVE_TIMEOUT + REKEY_TIMEOUT);
-+	/* We clear the endpoint address src address, in case this is the cause
-+	 * of trouble.
-+	 */
-+	wg_socket_clear_peer_endpoint_src(peer);
-+	wg_packet_send_queued_handshake_initiation(peer, false);
-+}
-+
-+static void wg_expired_zero_key_material(struct timer_list *timer)
-+{
-+	struct wg_peer *peer = from_timer(peer, timer, timer_zero_key_material);
-+
-+	rcu_read_lock_bh();
-+	if (!READ_ONCE(peer->is_dead)) {
-+		wg_peer_get(peer);
-+		if (!queue_work(peer->device->handshake_send_wq,
-+				&peer->clear_peer_work))
-+			/* If the work was already on the queue, we want to drop
-+			 * the extra reference.
-+			 */
-+			wg_peer_put(peer);
-+	}
-+	rcu_read_unlock_bh();
-+}
-+
-+static void wg_queued_expired_zero_key_material(struct work_struct *work)
-+{
-+	struct wg_peer *peer = container_of(work, struct wg_peer,
-+					    clear_peer_work);
-+
-+	pr_debug("%s: Zeroing out all keys for peer %llu (%pISpfsc), since we haven't received a new one in %d seconds\n",
-+		 peer->device->dev->name, peer->internal_id,
-+		 &peer->endpoint.addr, REJECT_AFTER_TIME * 3);
-+	wg_noise_handshake_clear(&peer->handshake);
-+	wg_noise_keypairs_clear(&peer->keypairs);
-+	wg_peer_put(peer);
-+}
-+
-+static void wg_expired_send_persistent_keepalive(struct timer_list *timer)
-+{
-+	struct wg_peer *peer = from_timer(peer, timer,
-+					  timer_persistent_keepalive);
-+
-+	if (likely(peer->persistent_keepalive_interval))
-+		wg_packet_send_keepalive(peer);
-+}
-+
-+/* Should be called after an authenticated data packet is sent. */
-+void wg_timers_data_sent(struct wg_peer *peer)
-+{
-+	if (!timer_pending(&peer->timer_new_handshake))
-+		mod_peer_timer(peer, &peer->timer_new_handshake,
-+			jiffies + (KEEPALIVE_TIMEOUT + REKEY_TIMEOUT) * HZ +
-+			prandom_u32_max(REKEY_TIMEOUT_JITTER_MAX_JIFFIES));
-+}
-+
-+/* Should be called after an authenticated data packet is received. */
-+void wg_timers_data_received(struct wg_peer *peer)
-+{
-+	if (likely(netif_running(peer->device->dev))) {
-+		if (!timer_pending(&peer->timer_send_keepalive))
-+			mod_peer_timer(peer, &peer->timer_send_keepalive,
-+				       jiffies + KEEPALIVE_TIMEOUT * HZ);
-+		else
-+			peer->timer_need_another_keepalive = true;
-+	}
-+}
-+
-+/* Should be called after any type of authenticated packet is sent, whether
-+ * keepalive, data, or handshake.
-+ */
-+void wg_timers_any_authenticated_packet_sent(struct wg_peer *peer)
-+{
-+	del_timer(&peer->timer_send_keepalive);
-+}
-+
-+/* Should be called after any type of authenticated packet is received, whether
-+ * keepalive, data, or handshake.
-+ */
-+void wg_timers_any_authenticated_packet_received(struct wg_peer *peer)
-+{
-+	del_timer(&peer->timer_new_handshake);
-+}
-+
-+/* Should be called after a handshake initiation message is sent. */
-+void wg_timers_handshake_initiated(struct wg_peer *peer)
-+{
-+	mod_peer_timer(peer, &peer->timer_retransmit_handshake,
-+		       jiffies + REKEY_TIMEOUT * HZ +
-+		       prandom_u32_max(REKEY_TIMEOUT_JITTER_MAX_JIFFIES));
-+}
-+
-+/* Should be called after a handshake response message is received and processed
-+ * or when getting key confirmation via the first data message.
-+ */
-+void wg_timers_handshake_complete(struct wg_peer *peer)
-+{
-+	del_timer(&peer->timer_retransmit_handshake);
-+	peer->timer_handshake_attempts = 0;
-+	peer->sent_lastminute_handshake = false;
-+	ktime_get_real_ts64(&peer->walltime_last_handshake);
-+}
-+
-+/* Should be called after an ephemeral key is created, which is before sending a
-+ * handshake response or after receiving a handshake response.
-+ */
-+void wg_timers_session_derived(struct wg_peer *peer)
-+{
-+	mod_peer_timer(peer, &peer->timer_zero_key_material,
-+		       jiffies + REJECT_AFTER_TIME * 3 * HZ);
-+}
-+
-+/* Should be called before a packet with authentication, whether
-+ * keepalive, data, or handshakem is sent, or after one is received.
-+ */
-+void wg_timers_any_authenticated_packet_traversal(struct wg_peer *peer)
-+{
-+	if (peer->persistent_keepalive_interval)
-+		mod_peer_timer(peer, &peer->timer_persistent_keepalive,
-+			jiffies + peer->persistent_keepalive_interval * HZ);
-+}
-+
-+void wg_timers_init(struct wg_peer *peer)
-+{
-+	timer_setup(&peer->timer_retransmit_handshake,
-+		    wg_expired_retransmit_handshake, 0);
-+	timer_setup(&peer->timer_send_keepalive, wg_expired_send_keepalive, 0);
-+	timer_setup(&peer->timer_new_handshake, wg_expired_new_handshake, 0);
-+	timer_setup(&peer->timer_zero_key_material,
-+		    wg_expired_zero_key_material, 0);
-+	timer_setup(&peer->timer_persistent_keepalive,
-+		    wg_expired_send_persistent_keepalive, 0);
-+	INIT_WORK(&peer->clear_peer_work, wg_queued_expired_zero_key_material);
-+	peer->timer_handshake_attempts = 0;
-+	peer->sent_lastminute_handshake = false;
-+	peer->timer_need_another_keepalive = false;
-+}
-+
-+void wg_timers_stop(struct wg_peer *peer)
-+{
-+	del_timer_sync(&peer->timer_retransmit_handshake);
-+	del_timer_sync(&peer->timer_send_keepalive);
-+	del_timer_sync(&peer->timer_new_handshake);
-+	del_timer_sync(&peer->timer_zero_key_material);
-+	del_timer_sync(&peer->timer_persistent_keepalive);
-+	flush_work(&peer->clear_peer_work);
-+}
---- /dev/null
-+++ b/drivers/net/wireguard/timers.h
-@@ -0,0 +1,31 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#ifndef _WG_TIMERS_H
-+#define _WG_TIMERS_H
-+
-+#include <linux/ktime.h>
-+
-+struct wg_peer;
-+
-+void wg_timers_init(struct wg_peer *peer);
-+void wg_timers_stop(struct wg_peer *peer);
-+void wg_timers_data_sent(struct wg_peer *peer);
-+void wg_timers_data_received(struct wg_peer *peer);
-+void wg_timers_any_authenticated_packet_sent(struct wg_peer *peer);
-+void wg_timers_any_authenticated_packet_received(struct wg_peer *peer);
-+void wg_timers_handshake_initiated(struct wg_peer *peer);
-+void wg_timers_handshake_complete(struct wg_peer *peer);
-+void wg_timers_session_derived(struct wg_peer *peer);
-+void wg_timers_any_authenticated_packet_traversal(struct wg_peer *peer);
-+
-+static inline bool wg_birthdate_has_expired(u64 birthday_nanoseconds,
-+					    u64 expiration_seconds)
-+{
-+	return (s64)(birthday_nanoseconds + expiration_seconds * NSEC_PER_SEC)
-+		<= (s64)ktime_get_coarse_boottime_ns();
-+}
-+
-+#endif /* _WG_TIMERS_H */
---- /dev/null
-+++ b/drivers/net/wireguard/version.h
-@@ -0,0 +1 @@
-+#define WIREGUARD_VERSION "1.0.0"
---- /dev/null
-+++ b/include/uapi/linux/wireguard.h
-@@ -0,0 +1,196 @@
-+/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR MIT */
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ *
-+ * Documentation
-+ * =============
-+ *
-+ * The below enums and macros are for interfacing with WireGuard, using generic
-+ * netlink, with family WG_GENL_NAME and version WG_GENL_VERSION. It defines two
-+ * methods: get and set. Note that while they share many common attributes,
-+ * these two functions actually accept a slightly different set of inputs and
-+ * outputs.
-+ *
-+ * WG_CMD_GET_DEVICE
-+ * -----------------
-+ *
-+ * May only be called via NLM_F_REQUEST | NLM_F_DUMP. The command should contain
-+ * one but not both of:
-+ *
-+ *    WGDEVICE_A_IFINDEX: NLA_U32
-+ *    WGDEVICE_A_IFNAME: NLA_NUL_STRING, maxlen IFNAMESIZ - 1
-+ *
-+ * The kernel will then return several messages (NLM_F_MULTI) containing the
-+ * following tree of nested items:
-+ *
-+ *    WGDEVICE_A_IFINDEX: NLA_U32
-+ *    WGDEVICE_A_IFNAME: NLA_NUL_STRING, maxlen IFNAMESIZ - 1
-+ *    WGDEVICE_A_PRIVATE_KEY: NLA_EXACT_LEN, len WG_KEY_LEN
-+ *    WGDEVICE_A_PUBLIC_KEY: NLA_EXACT_LEN, len WG_KEY_LEN
-+ *    WGDEVICE_A_LISTEN_PORT: NLA_U16
-+ *    WGDEVICE_A_FWMARK: NLA_U32
-+ *    WGDEVICE_A_PEERS: NLA_NESTED
-+ *        0: NLA_NESTED
-+ *            WGPEER_A_PUBLIC_KEY: NLA_EXACT_LEN, len WG_KEY_LEN
-+ *            WGPEER_A_PRESHARED_KEY: NLA_EXACT_LEN, len WG_KEY_LEN
-+ *            WGPEER_A_ENDPOINT: NLA_MIN_LEN(struct sockaddr), struct sockaddr_in or struct sockaddr_in6
-+ *            WGPEER_A_PERSISTENT_KEEPALIVE_INTERVAL: NLA_U16
-+ *            WGPEER_A_LAST_HANDSHAKE_TIME: NLA_EXACT_LEN, struct __kernel_timespec
-+ *            WGPEER_A_RX_BYTES: NLA_U64
-+ *            WGPEER_A_TX_BYTES: NLA_U64
-+ *            WGPEER_A_ALLOWEDIPS: NLA_NESTED
-+ *                0: NLA_NESTED
-+ *                    WGALLOWEDIP_A_FAMILY: NLA_U16
-+ *                    WGALLOWEDIP_A_IPADDR: NLA_MIN_LEN(struct in_addr), struct in_addr or struct in6_addr
-+ *                    WGALLOWEDIP_A_CIDR_MASK: NLA_U8
-+ *                0: NLA_NESTED
-+ *                    ...
-+ *                0: NLA_NESTED
-+ *                    ...
-+ *                ...
-+ *            WGPEER_A_PROTOCOL_VERSION: NLA_U32
-+ *        0: NLA_NESTED
-+ *            ...
-+ *        ...
-+ *
-+ * It is possible that all of the allowed IPs of a single peer will not
-+ * fit within a single netlink message. In that case, the same peer will
-+ * be written in the following message, except it will only contain
-+ * WGPEER_A_PUBLIC_KEY and WGPEER_A_ALLOWEDIPS. This may occur several
-+ * times in a row for the same peer. It is then up to the receiver to
-+ * coalesce adjacent peers. Likewise, it is possible that all peers will
-+ * not fit within a single message. So, subsequent peers will be sent
-+ * in following messages, except those will only contain WGDEVICE_A_IFNAME
-+ * and WGDEVICE_A_PEERS. It is then up to the receiver to coalesce these
-+ * messages to form the complete list of peers.
-+ *
-+ * Since this is an NLA_F_DUMP command, the final message will always be
-+ * NLMSG_DONE, even if an error occurs. However, this NLMSG_DONE message
-+ * contains an integer error code. It is either zero or a negative error
-+ * code corresponding to the errno.
-+ *
-+ * WG_CMD_SET_DEVICE
-+ * -----------------
-+ *
-+ * May only be called via NLM_F_REQUEST. The command should contain the
-+ * following tree of nested items, containing one but not both of
-+ * WGDEVICE_A_IFINDEX and WGDEVICE_A_IFNAME:
-+ *
-+ *    WGDEVICE_A_IFINDEX: NLA_U32
-+ *    WGDEVICE_A_IFNAME: NLA_NUL_STRING, maxlen IFNAMESIZ - 1
-+ *    WGDEVICE_A_FLAGS: NLA_U32, 0 or WGDEVICE_F_REPLACE_PEERS if all current
-+ *                      peers should be removed prior to adding the list below.
-+ *    WGDEVICE_A_PRIVATE_KEY: len WG_KEY_LEN, all zeros to remove
-+ *    WGDEVICE_A_LISTEN_PORT: NLA_U16, 0 to choose randomly
-+ *    WGDEVICE_A_FWMARK: NLA_U32, 0 to disable
-+ *    WGDEVICE_A_PEERS: NLA_NESTED
-+ *        0: NLA_NESTED
-+ *            WGPEER_A_PUBLIC_KEY: len WG_KEY_LEN
-+ *            WGPEER_A_FLAGS: NLA_U32, 0 and/or WGPEER_F_REMOVE_ME if the
-+ *                            specified peer should not exist at the end of the
-+ *                            operation, rather than added/updated and/or
-+ *                            WGPEER_F_REPLACE_ALLOWEDIPS if all current allowed
-+ *                            IPs of this peer should be removed prior to adding
-+ *                            the list below and/or WGPEER_F_UPDATE_ONLY if the
-+ *                            peer should only be set if it already exists.
-+ *            WGPEER_A_PRESHARED_KEY: len WG_KEY_LEN, all zeros to remove
-+ *            WGPEER_A_ENDPOINT: struct sockaddr_in or struct sockaddr_in6
-+ *            WGPEER_A_PERSISTENT_KEEPALIVE_INTERVAL: NLA_U16, 0 to disable
-+ *            WGPEER_A_ALLOWEDIPS: NLA_NESTED
-+ *                0: NLA_NESTED
-+ *                    WGALLOWEDIP_A_FAMILY: NLA_U16
-+ *                    WGALLOWEDIP_A_IPADDR: struct in_addr or struct in6_addr
-+ *                    WGALLOWEDIP_A_CIDR_MASK: NLA_U8
-+ *                0: NLA_NESTED
-+ *                    ...
-+ *                0: NLA_NESTED
-+ *                    ...
-+ *                ...
-+ *            WGPEER_A_PROTOCOL_VERSION: NLA_U32, should not be set or used at
-+ *                                       all by most users of this API, as the
-+ *                                       most recent protocol will be used when
-+ *                                       this is unset. Otherwise, must be set
-+ *                                       to 1.
-+ *        0: NLA_NESTED
-+ *            ...
-+ *        ...
-+ *
-+ * It is possible that the amount of configuration data exceeds that of
-+ * the maximum message length accepted by the kernel. In that case, several
-+ * messages should be sent one after another, with each successive one
-+ * filling in information not contained in the prior. Note that if
-+ * WGDEVICE_F_REPLACE_PEERS is specified in the first message, it probably
-+ * should not be specified in fragments that come after, so that the list
-+ * of peers is only cleared the first time but appened after. Likewise for
-+ * peers, if WGPEER_F_REPLACE_ALLOWEDIPS is specified in the first message
-+ * of a peer, it likely should not be specified in subsequent fragments.
-+ *
-+ * If an error occurs, NLMSG_ERROR will reply containing an errno.
-+ */
-+
-+#ifndef _WG_UAPI_WIREGUARD_H
-+#define _WG_UAPI_WIREGUARD_H
-+
-+#define WG_GENL_NAME "wireguard"
-+#define WG_GENL_VERSION 1
-+
-+#define WG_KEY_LEN 32
-+
-+enum wg_cmd {
-+	WG_CMD_GET_DEVICE,
-+	WG_CMD_SET_DEVICE,
-+	__WG_CMD_MAX
-+};
-+#define WG_CMD_MAX (__WG_CMD_MAX - 1)
-+
-+enum wgdevice_flag {
-+	WGDEVICE_F_REPLACE_PEERS = 1U << 0,
-+	__WGDEVICE_F_ALL = WGDEVICE_F_REPLACE_PEERS
-+};
-+enum wgdevice_attribute {
-+	WGDEVICE_A_UNSPEC,
-+	WGDEVICE_A_IFINDEX,
-+	WGDEVICE_A_IFNAME,
-+	WGDEVICE_A_PRIVATE_KEY,
-+	WGDEVICE_A_PUBLIC_KEY,
-+	WGDEVICE_A_FLAGS,
-+	WGDEVICE_A_LISTEN_PORT,
-+	WGDEVICE_A_FWMARK,
-+	WGDEVICE_A_PEERS,
-+	__WGDEVICE_A_LAST
-+};
-+#define WGDEVICE_A_MAX (__WGDEVICE_A_LAST - 1)
-+
-+enum wgpeer_flag {
-+	WGPEER_F_REMOVE_ME = 1U << 0,
-+	WGPEER_F_REPLACE_ALLOWEDIPS = 1U << 1,
-+	WGPEER_F_UPDATE_ONLY = 1U << 2,
-+	__WGPEER_F_ALL = WGPEER_F_REMOVE_ME | WGPEER_F_REPLACE_ALLOWEDIPS |
-+			 WGPEER_F_UPDATE_ONLY
-+};
-+enum wgpeer_attribute {
-+	WGPEER_A_UNSPEC,
-+	WGPEER_A_PUBLIC_KEY,
-+	WGPEER_A_PRESHARED_KEY,
-+	WGPEER_A_FLAGS,
-+	WGPEER_A_ENDPOINT,
-+	WGPEER_A_PERSISTENT_KEEPALIVE_INTERVAL,
-+	WGPEER_A_LAST_HANDSHAKE_TIME,
-+	WGPEER_A_RX_BYTES,
-+	WGPEER_A_TX_BYTES,
-+	WGPEER_A_ALLOWEDIPS,
-+	WGPEER_A_PROTOCOL_VERSION,
-+	__WGPEER_A_LAST
-+};
-+#define WGPEER_A_MAX (__WGPEER_A_LAST - 1)
-+
-+enum wgallowedip_attribute {
-+	WGALLOWEDIP_A_UNSPEC,
-+	WGALLOWEDIP_A_FAMILY,
-+	WGALLOWEDIP_A_IPADDR,
-+	WGALLOWEDIP_A_CIDR_MASK,
-+	__WGALLOWEDIP_A_LAST
-+};
-+#define WGALLOWEDIP_A_MAX (__WGALLOWEDIP_A_LAST - 1)
-+
-+#endif /* _WG_UAPI_WIREGUARD_H */
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/netns.sh
-@@ -0,0 +1,537 @@
-+#!/bin/bash
-+# SPDX-License-Identifier: GPL-2.0
-+#
-+# Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+#
-+# This script tests the below topology:
-+#
-+# ┌─────────────────────�   ┌──────────────────────────────────�   ┌─────────────────────�
-+# │   $ns1 namespace    │   │          $ns0 namespace          │   │   $ns2 namespace    │
-+# │                     │   │                                  │   │                     │
-+# │┌────────�           │   │            ┌────────�            │   │           ┌────────�│
-+# ││  wg0   │───────────┼───┼────────────│   lo   │────────────┼───┼───────────│  wg0   ││
-+# │├────────┴──────────�│   │    ┌───────┴────────┴────────�   │   │┌──────────┴────────┤│
-+# ││192.168.241.1/24   ││   │    │(ns1)         (ns2)      │   │   ││192.168.241.2/24   ││
-+# ││fd00::1/24         ││   │    │127.0.0.1:1   127.0.0.1:2│   │   ││fd00::2/24         ││
-+# │└───────────────────┘│   │    │[::]:1        [::]:2     │   │   │└───────────────────┘│
-+# └─────────────────────┘   │    └─────────────────────────┘   │   └─────────────────────┘
-+#                           └──────────────────────────────────┘
-+#
-+# After the topology is prepared we run a series of TCP/UDP iperf3 tests between the
-+# wireguard peers in $ns1 and $ns2. Note that $ns0 is the endpoint for the wg0
-+# interfaces in $ns1 and $ns2. See https://www.wireguard.com/netns/ for further
-+# details on how this is accomplished.
-+set -e
-+
-+exec 3>&1
-+export WG_HIDE_KEYS=never
-+netns0="wg-test-$$-0"
-+netns1="wg-test-$$-1"
-+netns2="wg-test-$$-2"
-+pretty() { echo -e "\x1b[32m\x1b[1m[+] ${1:+NS$1: }${2}\x1b[0m" >&3; }
-+pp() { pretty "" "$*"; "$@"; }
-+maybe_exec() { if [[ $BASHPID -eq $$ ]]; then "$@"; else exec "$@"; fi; }
-+n0() { pretty 0 "$*"; maybe_exec ip netns exec $netns0 "$@"; }
-+n1() { pretty 1 "$*"; maybe_exec ip netns exec $netns1 "$@"; }
-+n2() { pretty 2 "$*"; maybe_exec ip netns exec $netns2 "$@"; }
-+ip0() { pretty 0 "ip $*"; ip -n $netns0 "$@"; }
-+ip1() { pretty 1 "ip $*"; ip -n $netns1 "$@"; }
-+ip2() { pretty 2 "ip $*"; ip -n $netns2 "$@"; }
-+sleep() { read -t "$1" -N 0 || true; }
-+waitiperf() { pretty "${1//*-}" "wait for iperf:5201"; while [[ $(ss -N "$1" -tlp 'sport = 5201') != *iperf3* ]]; do sleep 0.1; done; }
-+waitncatudp() { pretty "${1//*-}" "wait for udp:1111"; while [[ $(ss -N "$1" -ulp 'sport = 1111') != *ncat* ]]; do sleep 0.1; done; }
-+waitncattcp() { pretty "${1//*-}" "wait for tcp:1111"; while [[ $(ss -N "$1" -tlp 'sport = 1111') != *ncat* ]]; do sleep 0.1; done; }
-+waitiface() { pretty "${1//*-}" "wait for $2 to come up"; ip netns exec "$1" bash -c "while [[ \$(< \"/sys/class/net/$2/operstate\") != up ]]; do read -t .1 -N 0 || true; done;"; }
-+
-+cleanup() {
-+	set +e
-+	exec 2>/dev/null
-+	printf "$orig_message_cost" > /proc/sys/net/core/message_cost
-+	ip0 link del dev wg0
-+	ip1 link del dev wg0
-+	ip2 link del dev wg0
-+	local to_kill="$(ip netns pids $netns0) $(ip netns pids $netns1) $(ip netns pids $netns2)"
-+	[[ -n $to_kill ]] && kill $to_kill
-+	pp ip netns del $netns1
-+	pp ip netns del $netns2
-+	pp ip netns del $netns0
-+	exit
-+}
-+
-+orig_message_cost="$(< /proc/sys/net/core/message_cost)"
-+trap cleanup EXIT
-+printf 0 > /proc/sys/net/core/message_cost
-+
-+ip netns del $netns0 2>/dev/null || true
-+ip netns del $netns1 2>/dev/null || true
-+ip netns del $netns2 2>/dev/null || true
-+pp ip netns add $netns0
-+pp ip netns add $netns1
-+pp ip netns add $netns2
-+ip0 link set up dev lo
-+
-+ip0 link add dev wg0 type wireguard
-+ip0 link set wg0 netns $netns1
-+ip0 link add dev wg0 type wireguard
-+ip0 link set wg0 netns $netns2
-+key1="$(pp wg genkey)"
-+key2="$(pp wg genkey)"
-+key3="$(pp wg genkey)"
-+pub1="$(pp wg pubkey <<<"$key1")"
-+pub2="$(pp wg pubkey <<<"$key2")"
-+pub3="$(pp wg pubkey <<<"$key3")"
-+psk="$(pp wg genpsk)"
-+[[ -n $key1 && -n $key2 && -n $psk ]]
-+
-+configure_peers() {
-+	ip1 addr add 192.168.241.1/24 dev wg0
-+	ip1 addr add fd00::1/24 dev wg0
-+
-+	ip2 addr add 192.168.241.2/24 dev wg0
-+	ip2 addr add fd00::2/24 dev wg0
-+
-+	n1 wg set wg0 \
-+		private-key <(echo "$key1") \
-+		listen-port 1 \
-+		peer "$pub2" \
-+			preshared-key <(echo "$psk") \
-+			allowed-ips 192.168.241.2/32,fd00::2/128
-+	n2 wg set wg0 \
-+		private-key <(echo "$key2") \
-+		listen-port 2 \
-+		peer "$pub1" \
-+			preshared-key <(echo "$psk") \
-+			allowed-ips 192.168.241.1/32,fd00::1/128
-+
-+	ip1 link set up dev wg0
-+	ip2 link set up dev wg0
-+}
-+configure_peers
-+
-+tests() {
-+	# Ping over IPv4
-+	n2 ping -c 10 -f -W 1 192.168.241.1
-+	n1 ping -c 10 -f -W 1 192.168.241.2
-+
-+	# Ping over IPv6
-+	n2 ping6 -c 10 -f -W 1 fd00::1
-+	n1 ping6 -c 10 -f -W 1 fd00::2
-+
-+	# TCP over IPv4
-+	n2 iperf3 -s -1 -B 192.168.241.2 &
-+	waitiperf $netns2
-+	n1 iperf3 -Z -t 3 -c 192.168.241.2
-+
-+	# TCP over IPv6
-+	n1 iperf3 -s -1 -B fd00::1 &
-+	waitiperf $netns1
-+	n2 iperf3 -Z -t 3 -c fd00::1
-+
-+	# UDP over IPv4
-+	n1 iperf3 -s -1 -B 192.168.241.1 &
-+	waitiperf $netns1
-+	n2 iperf3 -Z -t 3 -b 0 -u -c 192.168.241.1
-+
-+	# UDP over IPv6
-+	n2 iperf3 -s -1 -B fd00::2 &
-+	waitiperf $netns2
-+	n1 iperf3 -Z -t 3 -b 0 -u -c fd00::2
-+}
-+
-+[[ $(ip1 link show dev wg0) =~ mtu\ ([0-9]+) ]] && orig_mtu="${BASH_REMATCH[1]}"
-+big_mtu=$(( 34816 - 1500 + $orig_mtu ))
-+
-+# Test using IPv4 as outer transport
-+n1 wg set wg0 peer "$pub2" endpoint 127.0.0.1:2
-+n2 wg set wg0 peer "$pub1" endpoint 127.0.0.1:1
-+# Before calling tests, we first make sure that the stats counters and timestamper are working
-+n2 ping -c 10 -f -W 1 192.168.241.1
-+{ read _; read _; read _; read rx_bytes _; read _; read tx_bytes _; } < <(ip2 -stats link show dev wg0)
-+(( rx_bytes == 1372 && (tx_bytes == 1428 || tx_bytes == 1460) ))
-+{ read _; read _; read _; read rx_bytes _; read _; read tx_bytes _; } < <(ip1 -stats link show dev wg0)
-+(( tx_bytes == 1372 && (rx_bytes == 1428 || rx_bytes == 1460) ))
-+read _ rx_bytes tx_bytes < <(n2 wg show wg0 transfer)
-+(( rx_bytes == 1372 && (tx_bytes == 1428 || tx_bytes == 1460) ))
-+read _ rx_bytes tx_bytes < <(n1 wg show wg0 transfer)
-+(( tx_bytes == 1372 && (rx_bytes == 1428 || rx_bytes == 1460) ))
-+read _ timestamp < <(n1 wg show wg0 latest-handshakes)
-+(( timestamp != 0 ))
-+
-+tests
-+ip1 link set wg0 mtu $big_mtu
-+ip2 link set wg0 mtu $big_mtu
-+tests
-+
-+ip1 link set wg0 mtu $orig_mtu
-+ip2 link set wg0 mtu $orig_mtu
-+
-+# Test using IPv6 as outer transport
-+n1 wg set wg0 peer "$pub2" endpoint [::1]:2
-+n2 wg set wg0 peer "$pub1" endpoint [::1]:1
-+tests
-+ip1 link set wg0 mtu $big_mtu
-+ip2 link set wg0 mtu $big_mtu
-+tests
-+
-+# Test that route MTUs work with the padding
-+ip1 link set wg0 mtu 1300
-+ip2 link set wg0 mtu 1300
-+n1 wg set wg0 peer "$pub2" endpoint 127.0.0.1:2
-+n2 wg set wg0 peer "$pub1" endpoint 127.0.0.1:1
-+n0 iptables -A INPUT -m length --length 1360 -j DROP
-+n1 ip route add 192.168.241.2/32 dev wg0 mtu 1299
-+n2 ip route add 192.168.241.1/32 dev wg0 mtu 1299
-+n2 ping -c 1 -W 1 -s 1269 192.168.241.1
-+n2 ip route delete 192.168.241.1/32 dev wg0 mtu 1299
-+n1 ip route delete 192.168.241.2/32 dev wg0 mtu 1299
-+n0 iptables -F INPUT
-+
-+ip1 link set wg0 mtu $orig_mtu
-+ip2 link set wg0 mtu $orig_mtu
-+
-+# Test using IPv4 that roaming works
-+ip0 -4 addr del 127.0.0.1/8 dev lo
-+ip0 -4 addr add 127.212.121.99/8 dev lo
-+n1 wg set wg0 listen-port 9999
-+n1 wg set wg0 peer "$pub2" endpoint 127.0.0.1:2
-+n1 ping6 -W 1 -c 1 fd00::2
-+[[ $(n2 wg show wg0 endpoints) == "$pub1	127.212.121.99:9999" ]]
-+
-+# Test using IPv6 that roaming works
-+n1 wg set wg0 listen-port 9998
-+n1 wg set wg0 peer "$pub2" endpoint [::1]:2
-+n1 ping -W 1 -c 1 192.168.241.2
-+[[ $(n2 wg show wg0 endpoints) == "$pub1	[::1]:9998" ]]
-+
-+# Test that crypto-RP filter works
-+n1 wg set wg0 peer "$pub2" allowed-ips 192.168.241.0/24
-+exec 4< <(n1 ncat -l -u -p 1111)
-+ncat_pid=$!
-+waitncatudp $netns1
-+n2 ncat -u 192.168.241.1 1111 <<<"X"
-+read -r -N 1 -t 1 out <&4 && [[ $out == "X" ]]
-+kill $ncat_pid
-+more_specific_key="$(pp wg genkey | pp wg pubkey)"
-+n1 wg set wg0 peer "$more_specific_key" allowed-ips 192.168.241.2/32
-+n2 wg set wg0 listen-port 9997
-+exec 4< <(n1 ncat -l -u -p 1111)
-+ncat_pid=$!
-+waitncatudp $netns1
-+n2 ncat -u 192.168.241.1 1111 <<<"X"
-+! read -r -N 1 -t 1 out <&4 || false
-+kill $ncat_pid
-+n1 wg set wg0 peer "$more_specific_key" remove
-+[[ $(n1 wg show wg0 endpoints) == "$pub2	[::1]:9997" ]]
-+
-+# Test that we can change private keys keys and immediately handshake
-+n1 wg set wg0 private-key <(echo "$key1") peer "$pub2" preshared-key <(echo "$psk") allowed-ips 192.168.241.2/32 endpoint 127.0.0.1:2
-+n2 wg set wg0 private-key <(echo "$key2") listen-port 2 peer "$pub1" preshared-key <(echo "$psk") allowed-ips 192.168.241.1/32
-+n1 ping -W 1 -c 1 192.168.241.2
-+n1 wg set wg0 private-key <(echo "$key3")
-+n2 wg set wg0 peer "$pub3" preshared-key <(echo "$psk") allowed-ips 192.168.241.1/32 peer "$pub1" remove
-+n1 ping -W 1 -c 1 192.168.241.2
-+
-+ip1 link del wg0
-+ip2 link del wg0
-+
-+# Test using NAT. We now change the topology to this:
-+# ┌────────────────────────────────────────�    ┌────────────────────────────────────────────────�     ┌────────────────────────────────────────�
-+# │             $ns1 namespace             │    │                 $ns0 namespace                 │     │             $ns2 namespace             │
-+# │                                        │    │                                                │     │                                        │
-+# │  ┌─────�             ┌─────�           │    │    ┌──────�              ┌──────�              │     │  ┌─────�            ┌─────�            │
-+# │  │ wg0 │─────────────│vethc│───────────┼────┼────│vethrc│              │vethrs│──────────────┼─────┼──│veths│────────────│ wg0 │            │
-+# │  ├─────┴──────────�  ├─────┴──────────�│    │    ├──────┴─────────�    ├──────┴────────────� │     │  ├─────┴──────────� ├─────┴──────────� │
-+# │  │192.168.241.1/24│  │192.168.1.100/24││    │    │192.168.1.1/24  │    │10.0.0.1/24        │ │     │  │10.0.0.100/24   │ │192.168.241.2/24│ │
-+# │  │fd00::1/24      │  │                ││    │    │                │    │SNAT:192.168.1.0/24│ │     │  │                │ │fd00::2/24      │ │
-+# │  └────────────────┘  └────────────────┘│    │    └────────────────┘    └───────────────────┘ │     │  └────────────────┘ └────────────────┘ │
-+# └────────────────────────────────────────┘    └────────────────────────────────────────────────┘     └────────────────────────────────────────┘
-+
-+ip1 link add dev wg0 type wireguard
-+ip2 link add dev wg0 type wireguard
-+configure_peers
-+
-+ip0 link add vethrc type veth peer name vethc
-+ip0 link add vethrs type veth peer name veths
-+ip0 link set vethc netns $netns1
-+ip0 link set veths netns $netns2
-+ip0 link set vethrc up
-+ip0 link set vethrs up
-+ip0 addr add 192.168.1.1/24 dev vethrc
-+ip0 addr add 10.0.0.1/24 dev vethrs
-+ip1 addr add 192.168.1.100/24 dev vethc
-+ip1 link set vethc up
-+ip1 route add default via 192.168.1.1
-+ip2 addr add 10.0.0.100/24 dev veths
-+ip2 link set veths up
-+waitiface $netns0 vethrc
-+waitiface $netns0 vethrs
-+waitiface $netns1 vethc
-+waitiface $netns2 veths
-+
-+n0 bash -c 'printf 1 > /proc/sys/net/ipv4/ip_forward'
-+n0 bash -c 'printf 2 > /proc/sys/net/netfilter/nf_conntrack_udp_timeout'
-+n0 bash -c 'printf 2 > /proc/sys/net/netfilter/nf_conntrack_udp_timeout_stream'
-+n0 iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -d 10.0.0.0/24 -j SNAT --to 10.0.0.1
-+
-+n1 wg set wg0 peer "$pub2" endpoint 10.0.0.100:2 persistent-keepalive 1
-+n1 ping -W 1 -c 1 192.168.241.2
-+n2 ping -W 1 -c 1 192.168.241.1
-+[[ $(n2 wg show wg0 endpoints) == "$pub1	10.0.0.1:1" ]]
-+# Demonstrate n2 can still send packets to n1, since persistent-keepalive will prevent connection tracking entry from expiring (to see entries: `n0 conntrack -L`).
-+pp sleep 3
-+n2 ping -W 1 -c 1 192.168.241.1
-+n1 wg set wg0 peer "$pub2" persistent-keepalive 0
-+
-+# Do a wg-quick(8)-style policy routing for the default route, making sure vethc has a v6 address to tease out bugs.
-+ip1 -6 addr add fc00::9/96 dev vethc
-+ip1 -6 route add default via fc00::1
-+ip2 -4 addr add 192.168.99.7/32 dev wg0
-+ip2 -6 addr add abab::1111/128 dev wg0
-+n1 wg set wg0 fwmark 51820 peer "$pub2" allowed-ips 192.168.99.7,abab::1111
-+ip1 -6 route add default dev wg0 table 51820
-+ip1 -6 rule add not fwmark 51820 table 51820
-+ip1 -6 rule add table main suppress_prefixlength 0
-+ip1 -4 route add default dev wg0 table 51820
-+ip1 -4 rule add not fwmark 51820 table 51820
-+ip1 -4 rule add table main suppress_prefixlength 0
-+# suppress_prefixlength only got added in 3.12, and we want to support 3.10+.
-+if [[ $(ip1 -4 rule show all) == *suppress_prefixlength* ]]; then
-+	# Flood the pings instead of sending just one, to trigger routing table reference counting bugs.
-+	n1 ping -W 1 -c 100 -f 192.168.99.7
-+	n1 ping -W 1 -c 100 -f abab::1111
-+fi
-+
-+n0 iptables -t nat -F
-+ip0 link del vethrc
-+ip0 link del vethrs
-+ip1 link del wg0
-+ip2 link del wg0
-+
-+# Test that saddr routing is sticky but not too sticky, changing to this topology:
-+# ┌────────────────────────────────────────�    ┌────────────────────────────────────────�
-+# │             $ns1 namespace             │    │             $ns2 namespace             │
-+# │                                        │    │                                        │
-+# │  ┌─────�             ┌─────�           │    │  ┌─────�            ┌─────�            │
-+# │  │ wg0 │─────────────│veth1│───────────┼────┼──│veth2│────────────│ wg0 │            │
-+# │  ├─────┴──────────�  ├─────┴──────────�│    │  ├─────┴──────────� ├─────┴──────────� │
-+# │  │192.168.241.1/24│  │10.0.0.1/24     ││    │  │10.0.0.2/24     │ │192.168.241.2/24│ │
-+# │  │fd00::1/24      │  │fd00:aa::1/96   ││    │  │fd00:aa::2/96   │ │fd00::2/24      │ │
-+# │  └────────────────┘  └────────────────┘│    │  └────────────────┘ └────────────────┘ │
-+# └────────────────────────────────────────┘    └────────────────────────────────────────┘
-+
-+ip1 link add dev wg0 type wireguard
-+ip2 link add dev wg0 type wireguard
-+configure_peers
-+ip1 link add veth1 type veth peer name veth2
-+ip1 link set veth2 netns $netns2
-+n1 bash -c 'printf 0 > /proc/sys/net/ipv6/conf/all/accept_dad'
-+n2 bash -c 'printf 0 > /proc/sys/net/ipv6/conf/all/accept_dad'
-+n1 bash -c 'printf 0 > /proc/sys/net/ipv6/conf/veth1/accept_dad'
-+n2 bash -c 'printf 0 > /proc/sys/net/ipv6/conf/veth2/accept_dad'
-+n1 bash -c 'printf 1 > /proc/sys/net/ipv4/conf/veth1/promote_secondaries'
-+
-+# First we check that we aren't overly sticky and can fall over to new IPs when old ones are removed
-+ip1 addr add 10.0.0.1/24 dev veth1
-+ip1 addr add fd00:aa::1/96 dev veth1
-+ip2 addr add 10.0.0.2/24 dev veth2
-+ip2 addr add fd00:aa::2/96 dev veth2
-+ip1 link set veth1 up
-+ip2 link set veth2 up
-+waitiface $netns1 veth1
-+waitiface $netns2 veth2
-+n1 wg set wg0 peer "$pub2" endpoint 10.0.0.2:2
-+n1 ping -W 1 -c 1 192.168.241.2
-+ip1 addr add 10.0.0.10/24 dev veth1
-+ip1 addr del 10.0.0.1/24 dev veth1
-+n1 ping -W 1 -c 1 192.168.241.2
-+n1 wg set wg0 peer "$pub2" endpoint [fd00:aa::2]:2
-+n1 ping -W 1 -c 1 192.168.241.2
-+ip1 addr add fd00:aa::10/96 dev veth1
-+ip1 addr del fd00:aa::1/96 dev veth1
-+n1 ping -W 1 -c 1 192.168.241.2
-+
-+# Now we show that we can successfully do reply to sender routing
-+ip1 link set veth1 down
-+ip2 link set veth2 down
-+ip1 addr flush dev veth1
-+ip2 addr flush dev veth2
-+ip1 addr add 10.0.0.1/24 dev veth1
-+ip1 addr add 10.0.0.2/24 dev veth1
-+ip1 addr add fd00:aa::1/96 dev veth1
-+ip1 addr add fd00:aa::2/96 dev veth1
-+ip2 addr add 10.0.0.3/24 dev veth2
-+ip2 addr add fd00:aa::3/96 dev veth2
-+ip1 link set veth1 up
-+ip2 link set veth2 up
-+waitiface $netns1 veth1
-+waitiface $netns2 veth2
-+n2 wg set wg0 peer "$pub1" endpoint 10.0.0.1:1
-+n2 ping -W 1 -c 1 192.168.241.1
-+[[ $(n2 wg show wg0 endpoints) == "$pub1	10.0.0.1:1" ]]
-+n2 wg set wg0 peer "$pub1" endpoint [fd00:aa::1]:1
-+n2 ping -W 1 -c 1 192.168.241.1
-+[[ $(n2 wg show wg0 endpoints) == "$pub1	[fd00:aa::1]:1" ]]
-+n2 wg set wg0 peer "$pub1" endpoint 10.0.0.2:1
-+n2 ping -W 1 -c 1 192.168.241.1
-+[[ $(n2 wg show wg0 endpoints) == "$pub1	10.0.0.2:1" ]]
-+n2 wg set wg0 peer "$pub1" endpoint [fd00:aa::2]:1
-+n2 ping -W 1 -c 1 192.168.241.1
-+[[ $(n2 wg show wg0 endpoints) == "$pub1	[fd00:aa::2]:1" ]]
-+
-+# What happens if the inbound destination address belongs to a different interface as the default route?
-+ip1 link add dummy0 type dummy
-+ip1 addr add 10.50.0.1/24 dev dummy0
-+ip1 link set dummy0 up
-+ip2 route add 10.50.0.0/24 dev veth2
-+n2 wg set wg0 peer "$pub1" endpoint 10.50.0.1:1
-+n2 ping -W 1 -c 1 192.168.241.1
-+[[ $(n2 wg show wg0 endpoints) == "$pub1	10.50.0.1:1" ]]
-+
-+ip1 link del dummy0
-+ip1 addr flush dev veth1
-+ip2 addr flush dev veth2
-+ip1 route flush dev veth1
-+ip2 route flush dev veth2
-+
-+# Now we see what happens if another interface route takes precedence over an ongoing one
-+ip1 link add veth3 type veth peer name veth4
-+ip1 link set veth4 netns $netns2
-+ip1 addr add 10.0.0.1/24 dev veth1
-+ip2 addr add 10.0.0.2/24 dev veth2
-+ip1 addr add 10.0.0.3/24 dev veth3
-+ip1 link set veth1 up
-+ip2 link set veth2 up
-+ip1 link set veth3 up
-+ip2 link set veth4 up
-+waitiface $netns1 veth1
-+waitiface $netns2 veth2
-+waitiface $netns1 veth3
-+waitiface $netns2 veth4
-+ip1 route flush dev veth1
-+ip1 route flush dev veth3
-+ip1 route add 10.0.0.0/24 dev veth1 src 10.0.0.1 metric 2
-+n1 wg set wg0 peer "$pub2" endpoint 10.0.0.2:2
-+n1 ping -W 1 -c 1 192.168.241.2
-+[[ $(n2 wg show wg0 endpoints) == "$pub1	10.0.0.1:1" ]]
-+ip1 route add 10.0.0.0/24 dev veth3 src 10.0.0.3 metric 1
-+n1 bash -c 'printf 0 > /proc/sys/net/ipv4/conf/veth1/rp_filter'
-+n2 bash -c 'printf 0 > /proc/sys/net/ipv4/conf/veth4/rp_filter'
-+n1 bash -c 'printf 0 > /proc/sys/net/ipv4/conf/all/rp_filter'
-+n2 bash -c 'printf 0 > /proc/sys/net/ipv4/conf/all/rp_filter'
-+n1 ping -W 1 -c 1 192.168.241.2
-+[[ $(n2 wg show wg0 endpoints) == "$pub1	10.0.0.3:1" ]]
-+
-+ip1 link del veth1
-+ip1 link del veth3
-+ip1 link del wg0
-+ip2 link del wg0
-+
-+# We test that Netlink/IPC is working properly by doing things that usually cause split responses
-+ip0 link add dev wg0 type wireguard
-+config=( "[Interface]" "PrivateKey=$(wg genkey)" "[Peer]" "PublicKey=$(wg genkey)" )
-+for a in {1..255}; do
-+	for b in {0..255}; do
-+		config+=( "AllowedIPs=$a.$b.0.0/16,$a::$b/128" )
-+	done
-+done
-+n0 wg setconf wg0 <(printf '%s\n' "${config[@]}")
-+i=0
-+for ip in $(n0 wg show wg0 allowed-ips); do
-+	((++i))
-+done
-+((i == 255*256*2+1))
-+ip0 link del wg0
-+ip0 link add dev wg0 type wireguard
-+config=( "[Interface]" "PrivateKey=$(wg genkey)" )
-+for a in {1..40}; do
-+	config+=( "[Peer]" "PublicKey=$(wg genkey)" )
-+	for b in {1..52}; do
-+		config+=( "AllowedIPs=$a.$b.0.0/16" )
-+	done
-+done
-+n0 wg setconf wg0 <(printf '%s\n' "${config[@]}")
-+i=0
-+while read -r line; do
-+	j=0
-+	for ip in $line; do
-+		((++j))
-+	done
-+	((j == 53))
-+	((++i))
-+done < <(n0 wg show wg0 allowed-ips)
-+((i == 40))
-+ip0 link del wg0
-+ip0 link add wg0 type wireguard
-+config=( )
-+for i in {1..29}; do
-+	config+=( "[Peer]" "PublicKey=$(wg genkey)" )
-+done
-+config+=( "[Peer]" "PublicKey=$(wg genkey)" "AllowedIPs=255.2.3.4/32,abcd::255/128" )
-+n0 wg setconf wg0 <(printf '%s\n' "${config[@]}")
-+n0 wg showconf wg0 > /dev/null
-+ip0 link del wg0
-+
-+allowedips=( )
-+for i in {1..197}; do
-+        allowedips+=( abcd::$i )
-+done
-+saved_ifs="$IFS"
-+IFS=,
-+allowedips="${allowedips[*]}"
-+IFS="$saved_ifs"
-+ip0 link add wg0 type wireguard
-+n0 wg set wg0 peer "$pub1"
-+n0 wg set wg0 peer "$pub2" allowed-ips "$allowedips"
-+{
-+	read -r pub allowedips
-+	[[ $pub == "$pub1" && $allowedips == "(none)" ]]
-+	read -r pub allowedips
-+	[[ $pub == "$pub2" ]]
-+	i=0
-+	for _ in $allowedips; do
-+		((++i))
-+	done
-+	((i == 197))
-+} < <(n0 wg show wg0 allowed-ips)
-+ip0 link del wg0
-+
-+! n0 wg show doesnotexist || false
-+
-+ip0 link add wg0 type wireguard
-+n0 wg set wg0 private-key <(echo "$key1") peer "$pub2" preshared-key <(echo "$psk")
-+[[ $(n0 wg show wg0 private-key) == "$key1" ]]
-+[[ $(n0 wg show wg0 preshared-keys) == "$pub2	$psk" ]]
-+n0 wg set wg0 private-key /dev/null peer "$pub2" preshared-key /dev/null
-+[[ $(n0 wg show wg0 private-key) == "(none)" ]]
-+[[ $(n0 wg show wg0 preshared-keys) == "$pub2	(none)" ]]
-+n0 wg set wg0 peer "$pub2"
-+n0 wg set wg0 private-key <(echo "$key2")
-+[[ $(n0 wg show wg0 public-key) == "$pub2" ]]
-+[[ -z $(n0 wg show wg0 peers) ]]
-+n0 wg set wg0 peer "$pub2"
-+[[ -z $(n0 wg show wg0 peers) ]]
-+n0 wg set wg0 private-key <(echo "$key1")
-+n0 wg set wg0 peer "$pub2"
-+[[ $(n0 wg show wg0 peers) == "$pub2" ]]
-+n0 wg set wg0 private-key <(echo "/${key1:1}")
-+[[ $(n0 wg show wg0 private-key) == "+${key1:1}" ]]
-+n0 wg set wg0 peer "$pub2" allowed-ips 0.0.0.0/0,10.0.0.0/8,100.0.0.0/10,172.16.0.0/12,192.168.0.0/16
-+n0 wg set wg0 peer "$pub2" allowed-ips 0.0.0.0/0
-+n0 wg set wg0 peer "$pub2" allowed-ips ::/0,1700::/111,5000::/4,e000::/37,9000::/75
-+n0 wg set wg0 peer "$pub2" allowed-ips ::/0
-+ip0 link del wg0
-+
-+declare -A objects
-+while read -t 0.1 -r line 2>/dev/null || [[ $? -ne 142 ]]; do
-+	[[ $line =~ .*(wg[0-9]+:\ [A-Z][a-z]+\ [0-9]+)\ .*(created|destroyed).* ]] || continue
-+	objects["${BASH_REMATCH[1]}"]+="${BASH_REMATCH[2]}"
-+done < /dev/kmsg
-+alldeleted=1
-+for object in "${!objects[@]}"; do
-+	if [[ ${objects["$object"]} != *createddestroyed ]]; then
-+		echo "Error: $object: merely ${objects["$object"]}" >&3
-+		alldeleted=0
-+	fi
-+done
-+[[ $alldeleted -eq 1 ]]
-+pretty "" "Objects that were created were also destroyed."
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0073-wireguard-selftests-import-harness-makefile-for-test.patch b/target/linux/generic/backport-5.4/080-wireguard-0073-wireguard-selftests-import-harness-makefile-for-test.patch
deleted file mode 100644
index ca3853aa19..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0073-wireguard-selftests-import-harness-makefile-for-test.patch
+++ /dev/null
@@ -1,1078 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Sun, 15 Dec 2019 22:08:00 +0100
-Subject: [PATCH] wireguard: selftests: import harness makefile for test suite
-
-commit 65d88d04114bca7d85faebd5fed61069cb2b632c upstream.
-
-WireGuard has been using this on build.wireguard.com for the last
-several years with considerable success. It allows for very quick and
-iterative development cycles, and supports several platforms.
-
-To run the test suite on your current platform in QEMU:
-
-  $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc)
-
-To run it with KASAN and such turned on:
-
-  $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc)
-
-To run it emulated for another platform in QEMU:
-
-  $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc)
-
-At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k,
-mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64.
-
-The system supports incremental rebuilding, so it should be very fast to
-change a single file and then test it out and have immediate feedback.
-
-This requires for the right toolchain and qemu to be installed prior.
-I've had success with those from musl.cc.
-
-This is tailored for WireGuard at the moment, though later projects
-might generalize it for other network testing.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- .../selftests/wireguard/qemu/.gitignore       |   2 +
- .../testing/selftests/wireguard/qemu/Makefile | 385 ++++++++++++++++++
- .../wireguard/qemu/arch/aarch64.config        |   5 +
- .../wireguard/qemu/arch/aarch64_be.config     |   6 +
- .../selftests/wireguard/qemu/arch/arm.config  |   9 +
- .../wireguard/qemu/arch/armeb.config          |  10 +
- .../selftests/wireguard/qemu/arch/i686.config |   5 +
- .../selftests/wireguard/qemu/arch/m68k.config |   9 +
- .../selftests/wireguard/qemu/arch/mips.config |  11 +
- .../wireguard/qemu/arch/mips64.config         |  14 +
- .../wireguard/qemu/arch/mips64el.config       |  15 +
- .../wireguard/qemu/arch/mipsel.config         |  12 +
- .../wireguard/qemu/arch/powerpc.config        |  10 +
- .../wireguard/qemu/arch/powerpc64le.config    |  12 +
- .../wireguard/qemu/arch/x86_64.config         |   5 +
- .../selftests/wireguard/qemu/debug.config     |  67 +++
- tools/testing/selftests/wireguard/qemu/init.c | 284 +++++++++++++
- .../selftests/wireguard/qemu/kernel.config    |  86 ++++
- 18 files changed, 947 insertions(+)
- create mode 100644 tools/testing/selftests/wireguard/qemu/.gitignore
- create mode 100644 tools/testing/selftests/wireguard/qemu/Makefile
- create mode 100644 tools/testing/selftests/wireguard/qemu/arch/aarch64.config
- create mode 100644 tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config
- create mode 100644 tools/testing/selftests/wireguard/qemu/arch/arm.config
- create mode 100644 tools/testing/selftests/wireguard/qemu/arch/armeb.config
- create mode 100644 tools/testing/selftests/wireguard/qemu/arch/i686.config
- create mode 100644 tools/testing/selftests/wireguard/qemu/arch/m68k.config
- create mode 100644 tools/testing/selftests/wireguard/qemu/arch/mips.config
- create mode 100644 tools/testing/selftests/wireguard/qemu/arch/mips64.config
- create mode 100644 tools/testing/selftests/wireguard/qemu/arch/mips64el.config
- create mode 100644 tools/testing/selftests/wireguard/qemu/arch/mipsel.config
- create mode 100644 tools/testing/selftests/wireguard/qemu/arch/powerpc.config
- create mode 100644 tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config
- create mode 100644 tools/testing/selftests/wireguard/qemu/arch/x86_64.config
- create mode 100644 tools/testing/selftests/wireguard/qemu/debug.config
- create mode 100644 tools/testing/selftests/wireguard/qemu/init.c
- create mode 100644 tools/testing/selftests/wireguard/qemu/kernel.config
-
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/.gitignore
-@@ -0,0 +1,2 @@
-+build/
-+distfiles/
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/Makefile
-@@ -0,0 +1,385 @@
-+# SPDX-License-Identifier: GPL-2.0
-+#
-+# Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+
-+PWD := $(shell pwd)
-+
-+CHOST := $(shell gcc -dumpmachine)
-+ifneq (,$(ARCH))
-+CBUILD := $(subst -gcc,,$(lastword $(subst /, ,$(firstword $(wildcard $(foreach bindir,$(subst :, ,$(PATH)),$(bindir)/$(ARCH)-*-gcc))))))
-+ifeq (,$(CBUILD))
-+$(error The toolchain for $(ARCH) is not installed)
-+endif
-+else
-+CBUILD := $(CHOST)
-+ARCH := $(firstword $(subst -, ,$(CBUILD)))
-+endif
-+
-+# Set these from the environment to override
-+KERNEL_PATH ?= $(PWD)/../../../../..
-+BUILD_PATH ?= $(PWD)/build/$(ARCH)
-+DISTFILES_PATH ?= $(PWD)/distfiles
-+NR_CPUS ?= 4
-+
-+MIRROR := https://download.wireguard.com/qemu-test/distfiles/
-+
-+default: qemu
-+
-+# variable name, tarball project name, version, tarball extension, default URI base
-+define tar_download =
-+$(1)_VERSION := $(3)
-+$(1)_NAME := $(2)-$$($(1)_VERSION)
-+$(1)_TAR := $(DISTFILES_PATH)/$$($(1)_NAME)$(4)
-+$(1)_PATH := $(BUILD_PATH)/$$($(1)_NAME)
-+$(call file_download,$$($(1)_NAME)$(4),$(5),$(6))
-+endef
-+
-+define file_download =
-+$(DISTFILES_PATH)/$(1):
-+	mkdir -p $(DISTFILES_PATH)
-+	flock -x $$@.lock -c '[ -f $$@ ] && exit 0; wget -O $$@.tmp $(MIRROR)$(1) || wget -t inf --retry-on-http-error=404 -O $$@.tmp $(2)$(1) || rm -f $$@.tmp'
-+	if echo "$(3)  $$@.tmp" | sha256sum -c -; then mv $$@.tmp $$@; else rm -f $$@.tmp; exit 71; fi
-+endef
-+
-+$(eval $(call tar_download,MUSL,musl,1.1.20,.tar.gz,https://www.musl-libc.org/releases/,44be8771d0e6c6b5f82dd15662eb2957c9a3173a19a8b49966ac0542bbd40d61))
-+$(eval $(call tar_download,LIBMNL,libmnl,1.0.4,.tar.bz2,https://www.netfilter.org/projects/libmnl/files/,171f89699f286a5854b72b91d06e8f8e3683064c5901fb09d954a9ab6f551f81))
-+$(eval $(call tar_download,IPERF,iperf,3.1.7,.tar.gz,http://downloads.es.net/pub/iperf/,a4ef73406fe92250602b8da2ae89ec53211f805df97a1d1d629db5a14043734f))
-+$(eval $(call tar_download,BASH,bash,5.0,.tar.gz,https://ftp.gnu.org/gnu/bash/,b4a80f2ac66170b2913efbfb9f2594f1f76c7b1afd11f799e22035d63077fb4d))
-+$(eval $(call tar_download,IPROUTE2,iproute2,5.1.0,.tar.gz,https://www.kernel.org/pub/linux/utils/net/iproute2/,9b43707d6075ecdca14803ca8ce0c8553848c49fa1586d12fd508d66577243f2))
-+$(eval $(call tar_download,IPTABLES,iptables,1.6.1,.tar.bz2,https://www.netfilter.org/projects/iptables/files/,0fc2d7bd5d7be11311726466789d4c65fb4c8e096c9182b56ce97440864f0cf5))
-+$(eval $(call tar_download,NMAP,nmap,7.60,.tar.bz2,https://nmap.org/dist/,a8796ecc4fa6c38aad6139d9515dc8113023a82e9d787e5a5fb5fa1b05516f21))
-+$(eval $(call tar_download,IPUTILS,iputils,s20161105,.tar.gz,https://github.com/iputils/iputils/archive/s20161105.tar.gz/#,f813092f03d17294fd23544b129b95cdb87fe19f7970a51908a6b88509acad8a))
-+$(eval $(call tar_download,WIREGUARD_TOOLS,WireGuard,0.0.20191212,.tar.xz,https://git.zx2c4.com/WireGuard/snapshot/,b0d718380f7a8822b2f12d75e462fa4eafa3a77871002981f367cd4fe2a1b071))
-+
-+KERNEL_BUILD_PATH := $(BUILD_PATH)/kernel$(if $(findstring yes,$(DEBUG_KERNEL)),-debug)
-+rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d))
-+WIREGUARD_SOURCES := $(call rwildcard,$(KERNEL_PATH)/drivers/net/wireguard/,*)
-+
-+export CFLAGS ?= -O3 -pipe
-+export LDFLAGS ?=
-+export CPPFLAGS := -I$(BUILD_PATH)/include
-+
-+ifeq ($(CHOST),$(CBUILD))
-+CROSS_COMPILE_FLAG := --host=$(CHOST)
-+NOPIE_GCC := gcc -fno-PIE
-+CFLAGS += -march=native
-+STRIP := strip
-+else
-+$(info Cross compilation: building for $(CBUILD) using $(CHOST))
-+CROSS_COMPILE_FLAG := --build=$(CBUILD) --host=$(CHOST)
-+export CROSS_COMPILE=$(CBUILD)-
-+NOPIE_GCC := $(CBUILD)-gcc -fno-PIE
-+STRIP := $(CBUILD)-strip
-+endif
-+ifeq ($(ARCH),aarch64)
-+QEMU_ARCH := aarch64
-+KERNEL_ARCH := arm64
-+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm64/boot/Image
-+ifeq ($(CHOST),$(CBUILD))
-+QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
-+else
-+QEMU_MACHINE := -cpu cortex-a53 -machine virt
-+CFLAGS += -march=armv8-a -mtune=cortex-a53
-+endif
-+else ifeq ($(ARCH),aarch64_be)
-+QEMU_ARCH := aarch64
-+KERNEL_ARCH := arm64
-+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm64/boot/Image
-+ifeq ($(CHOST),$(CBUILD))
-+QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
-+else
-+QEMU_MACHINE := -cpu cortex-a53 -machine virt
-+CFLAGS += -march=armv8-a -mtune=cortex-a53
-+endif
-+else ifeq ($(ARCH),arm)
-+QEMU_ARCH := arm
-+KERNEL_ARCH := arm
-+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm/boot/zImage
-+ifeq ($(CHOST),$(CBUILD))
-+QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
-+else
-+QEMU_MACHINE := -cpu cortex-a15 -machine virt
-+CFLAGS += -march=armv7-a -mtune=cortex-a15 -mabi=aapcs-linux
-+endif
-+else ifeq ($(ARCH),armeb)
-+QEMU_ARCH := arm
-+KERNEL_ARCH := arm
-+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm/boot/zImage
-+ifeq ($(CHOST),$(CBUILD))
-+QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
-+else
-+QEMU_MACHINE := -cpu cortex-a15 -machine virt
-+CFLAGS += -march=armv7-a -mabi=aapcs-linux # We don't pass -mtune=cortex-a15 due to a compiler bug on big endian.
-+LDFLAGS += -Wl,--be8
-+endif
-+else ifeq ($(ARCH),x86_64)
-+QEMU_ARCH := x86_64
-+KERNEL_ARCH := x86_64
-+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/x86/boot/bzImage
-+ifeq ($(CHOST),$(CBUILD))
-+QEMU_MACHINE := -cpu host -machine q35,accel=kvm
-+else
-+QEMU_MACHINE := -cpu Skylake-Server -machine q35
-+CFLAGS += -march=skylake-avx512
-+endif
-+else ifeq ($(ARCH),i686)
-+QEMU_ARCH := i386
-+KERNEL_ARCH := x86
-+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/x86/boot/bzImage
-+ifeq ($(subst i686,x86_64,$(CBUILD)),$(CHOST))
-+QEMU_MACHINE := -cpu host -machine q35,accel=kvm
-+else
-+QEMU_MACHINE := -cpu coreduo -machine q35
-+CFLAGS += -march=prescott
-+endif
-+else ifeq ($(ARCH),mips64)
-+QEMU_ARCH := mips64
-+KERNEL_ARCH := mips
-+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
-+ifeq ($(CHOST),$(CBUILD))
-+QEMU_MACHINE := -cpu host -machine malta,accel=kvm
-+CFLAGS += -EB
-+else
-+QEMU_MACHINE := -cpu MIPS64R2-generic -machine malta -smp 1
-+CFLAGS += -march=mips64r2 -EB
-+endif
-+else ifeq ($(ARCH),mips64el)
-+QEMU_ARCH := mips64el
-+KERNEL_ARCH := mips
-+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
-+ifeq ($(CHOST),$(CBUILD))
-+QEMU_MACHINE := -cpu host -machine malta,accel=kvm
-+CFLAGS += -EL
-+else
-+QEMU_MACHINE := -cpu MIPS64R2-generic -machine malta -smp 1
-+CFLAGS += -march=mips64r2 -EL
-+endif
-+else ifeq ($(ARCH),mips)
-+QEMU_ARCH := mips
-+KERNEL_ARCH := mips
-+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
-+ifeq ($(CHOST),$(CBUILD))
-+QEMU_MACHINE := -cpu host -machine malta,accel=kvm
-+CFLAGS += -EB
-+else
-+QEMU_MACHINE := -cpu 24Kf -machine malta -smp 1
-+CFLAGS += -march=mips32r2 -EB
-+endif
-+else ifeq ($(ARCH),mipsel)
-+QEMU_ARCH := mipsel
-+KERNEL_ARCH := mips
-+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
-+ifeq ($(CHOST),$(CBUILD))
-+QEMU_MACHINE := -cpu host -machine malta,accel=kvm
-+CFLAGS += -EL
-+else
-+QEMU_MACHINE := -cpu 24Kf -machine malta -smp 1
-+CFLAGS += -march=mips32r2 -EL
-+endif
-+else ifeq ($(ARCH),powerpc64le)
-+QEMU_ARCH := ppc64
-+KERNEL_ARCH := powerpc
-+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
-+ifeq ($(CHOST),$(CBUILD))
-+QEMU_MACHINE := -cpu host,accel=kvm -machine pseries
-+else
-+QEMU_MACHINE := -machine pseries
-+endif
-+CFLAGS += -mcpu=powerpc64le -mlong-double-64
-+else ifeq ($(ARCH),powerpc)
-+QEMU_ARCH := ppc
-+KERNEL_ARCH := powerpc
-+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/powerpc/boot/uImage
-+ifeq ($(CHOST),$(CBUILD))
-+QEMU_MACHINE := -cpu host,accel=kvm -machine ppce500
-+else
-+QEMU_MACHINE := -machine ppce500
-+endif
-+CFLAGS += -mcpu=powerpc -mlong-double-64 -msecure-plt
-+else ifeq ($(ARCH),m68k)
-+QEMU_ARCH := m68k
-+KERNEL_ARCH := m68k
-+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
-+ifeq ($(CHOST),$(CBUILD))
-+QEMU_MACHINE := -cpu host,accel=kvm -machine q800
-+else
-+QEMU_MACHINE := -machine q800
-+endif
-+else
-+$(error I only build: x86_64, i686, arm, armeb, aarch64, aarch64_be, mips, mipsel, mips64, mips64el, powerpc64le, powerpc, m68k)
-+endif
-+
-+REAL_CC := $(CBUILD)-gcc
-+MUSL_CC := $(BUILD_PATH)/musl-gcc
-+export CC := $(MUSL_CC)
-+USERSPACE_DEPS := $(MUSL_CC) $(BUILD_PATH)/include/.installed $(BUILD_PATH)/include/linux/.installed
-+
-+build: $(KERNEL_BZIMAGE)
-+qemu: $(KERNEL_BZIMAGE)
-+	rm -f $(BUILD_PATH)/result
-+	timeout --foreground 20m qemu-system-$(QEMU_ARCH) \
-+		-nodefaults \
-+		-nographic \
-+		-smp $(NR_CPUS) \
-+		$(QEMU_MACHINE) \
-+		-m $$(grep -q CONFIG_DEBUG_KMEMLEAK=y $(KERNEL_BUILD_PATH)/.config && echo 1G || echo 256M) \
-+		-serial stdio \
-+		-serial file:$(BUILD_PATH)/result \
-+		-no-reboot \
-+		-monitor none \
-+		-kernel $<
-+	grep -Fq success $(BUILD_PATH)/result
-+
-+$(BUILD_PATH)/init-cpio-spec.txt:
-+	mkdir -p $(BUILD_PATH)
-+	echo "file /init $(BUILD_PATH)/init 755 0 0" > $@
-+	echo "file /init.sh $(PWD)/../netns.sh 755 0 0" >> $@
-+	echo "dir /dev 755 0 0" >> $@
-+	echo "nod /dev/console 644 0 0 c 5 1" >> $@
-+	echo "dir /bin 755 0 0" >> $@
-+	echo "file /bin/iperf3 $(IPERF_PATH)/src/iperf3 755 0 0" >> $@
-+	echo "file /bin/wg $(WIREGUARD_TOOLS_PATH)/src/tools/wg 755 0 0" >> $@
-+	echo "file /bin/bash $(BASH_PATH)/bash 755 0 0" >> $@
-+	echo "file /bin/ip $(IPROUTE2_PATH)/ip/ip 755 0 0" >> $@
-+	echo "file /bin/ss $(IPROUTE2_PATH)/misc/ss 755 0 0" >> $@
-+	echo "file /bin/ping $(IPUTILS_PATH)/ping 755 0 0" >> $@
-+	echo "file /bin/ncat $(NMAP_PATH)/ncat/ncat 755 0 0" >> $@
-+	echo "file /bin/xtables-multi $(IPTABLES_PATH)/iptables/xtables-multi 755 0 0" >> $@
-+	echo "slink /bin/iptables xtables-multi 777 0 0" >> $@
-+	echo "slink /bin/ping6 ping 777 0 0" >> $@
-+	echo "dir /lib 755 0 0" >> $@
-+	echo "file /lib/libc.so $(MUSL_PATH)/lib/libc.so 755 0 0" >> $@
-+	echo "slink /lib/ld-linux.so.1 libc.so 777 0 0" >> $@
-+
-+$(KERNEL_BUILD_PATH)/.config: kernel.config arch/$(ARCH).config
-+	mkdir -p $(KERNEL_BUILD_PATH)
-+	cp kernel.config $(KERNEL_BUILD_PATH)/minimal.config
-+	printf 'CONFIG_NR_CPUS=$(NR_CPUS)\nCONFIG_INITRAMFS_SOURCE="$(BUILD_PATH)/init-cpio-spec.txt"\n' >> $(KERNEL_BUILD_PATH)/minimal.config
-+	cat arch/$(ARCH).config >> $(KERNEL_BUILD_PATH)/minimal.config
-+	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) allnoconfig
-+	cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config $(KERNEL_BUILD_PATH)/minimal.config
-+	$(if $(findstring yes,$(DEBUG_KERNEL)),cp debug.config $(KERNEL_BUILD_PATH) && cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config debug.config,)
-+
-+$(KERNEL_BZIMAGE): $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(MUSL_PATH)/lib/libc.so $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/tools/wg $(BUILD_PATH)/init ../netns.sh $(WIREGUARD_SOURCES)
-+	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) CC="$(NOPIE_GCC)"
-+
-+$(BUILD_PATH)/include/linux/.installed: | $(KERNEL_BUILD_PATH)/.config
-+	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) INSTALL_HDR_PATH=$(BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) headers_install
-+	touch $@
-+
-+$(MUSL_PATH)/lib/libc.so: $(MUSL_TAR)
-+	mkdir -p $(BUILD_PATH)
-+	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
-+	cd $(MUSL_PATH) && CC=$(REAL_CC) ./configure --prefix=/ --disable-static --build=$(CBUILD)
-+	$(MAKE) -C $(MUSL_PATH)
-+	$(STRIP) -s $@
-+
-+$(BUILD_PATH)/include/.installed: $(MUSL_PATH)/lib/libc.so
-+	$(MAKE) -C $(MUSL_PATH) DESTDIR=$(BUILD_PATH) install-headers
-+	touch $@
-+
-+$(MUSL_CC): $(MUSL_PATH)/lib/libc.so
-+	sh $(MUSL_PATH)/tools/musl-gcc.specs.sh $(BUILD_PATH)/include $(MUSL_PATH)/lib /lib/ld-linux.so.1 > $(BUILD_PATH)/musl-gcc.specs
-+	printf '#!/bin/sh\nexec "$(REAL_CC)" --specs="$(BUILD_PATH)/musl-gcc.specs" -fno-stack-protector -no-pie "$$@"\n' > $(BUILD_PATH)/musl-gcc
-+	chmod +x $(BUILD_PATH)/musl-gcc
-+
-+$(IPERF_PATH)/.installed: $(IPERF_TAR)
-+	mkdir -p $(BUILD_PATH)
-+	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
-+	sed -i '1s/^/#include <stdint.h>/' $(IPERF_PATH)/src/cjson.h $(IPERF_PATH)/src/timer.h
-+	sed -i -r 's/-p?g//g' $(IPERF_PATH)/src/Makefile*
-+	touch $@
-+
-+$(IPERF_PATH)/src/iperf3: | $(IPERF_PATH)/.installed $(USERSPACE_DEPS)
-+	cd $(IPERF_PATH) && CFLAGS="$(CFLAGS) -D_GNU_SOURCE" ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared
-+	$(MAKE) -C $(IPERF_PATH)
-+	$(STRIP) -s $@
-+
-+$(LIBMNL_PATH)/.installed: $(LIBMNL_TAR)
-+	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
-+	touch $@
-+
-+$(LIBMNL_PATH)/src/.libs/libmnl.a: | $(LIBMNL_PATH)/.installed $(USERSPACE_DEPS)
-+	cd $(LIBMNL_PATH) && ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared
-+	$(MAKE) -C $(LIBMNL_PATH)
-+	sed -i 's:prefix=.*:prefix=$(LIBMNL_PATH):' $(LIBMNL_PATH)/libmnl.pc
-+
-+$(WIREGUARD_TOOLS_PATH)/.installed: $(WIREGUARD_TOOLS_TAR)
-+	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
-+	touch $@
-+
-+$(WIREGUARD_TOOLS_PATH)/src/tools/wg: | $(WIREGUARD_TOOLS_PATH)/.installed $(LIBMNL_PATH)/src/.libs/libmnl.a $(USERSPACE_DEPS)
-+	LDFLAGS="$(LDFLAGS) -L$(LIBMNL_PATH)/src/.libs" $(MAKE) -C $(WIREGUARD_TOOLS_PATH)/src/tools LIBMNL_CFLAGS="-I$(LIBMNL_PATH)/include" LIBMNL_LDLIBS="-lmnl" wg
-+	$(STRIP) -s $@
-+
-+$(BUILD_PATH)/init: init.c | $(USERSPACE_DEPS)
-+	mkdir -p $(BUILD_PATH)
-+	$(MUSL_CC) -o $@ $(CFLAGS) $(LDFLAGS) -std=gnu11 $<
-+	$(STRIP) -s $@
-+
-+$(IPUTILS_PATH)/.installed: $(IPUTILS_TAR)
-+	mkdir -p $(BUILD_PATH)
-+	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
-+	touch $@
-+
-+$(IPUTILS_PATH)/ping: | $(IPUTILS_PATH)/.installed $(USERSPACE_DEPS)
-+	$(MAKE) -C $(IPUTILS_PATH) USE_CAP=no USE_IDN=no USE_NETTLE=no USE_CRYPTO=no ping
-+	$(STRIP) -s $@
-+
-+$(BASH_PATH)/.installed: $(BASH_TAR)
-+	mkdir -p $(BUILD_PATH)
-+	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
-+	touch $@
-+
-+$(BASH_PATH)/bash: | $(BASH_PATH)/.installed $(USERSPACE_DEPS)
-+	cd $(BASH_PATH) && ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --without-bash-malloc --disable-debugger --disable-help-builtin --disable-history --disable-multibyte --disable-progcomp --disable-readline --disable-mem-scramble
-+	$(MAKE) -C $(BASH_PATH)
-+	$(STRIP) -s $@
-+
-+$(IPROUTE2_PATH)/.installed: $(IPROUTE2_TAR)
-+	mkdir -p $(BUILD_PATH)
-+	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
-+	printf 'CC:=$(CC)\nPKG_CONFIG:=pkg-config\nTC_CONFIG_XT:=n\nTC_CONFIG_ATM:=n\nTC_CONFIG_IPSET:=n\nIP_CONFIG_SETNS:=y\nHAVE_ELF:=n\nHAVE_MNL:=y\nHAVE_BERKELEY_DB:=n\nHAVE_LATEX:=n\nHAVE_PDFLATEX:=n\nCFLAGS+=-DHAVE_SETNS -DHAVE_LIBMNL -I$(LIBMNL_PATH)/include\nLDLIBS+=-lmnl' > $(IPROUTE2_PATH)/config.mk
-+	printf 'lib: snapshot\n\t$$(MAKE) -C lib\nip/ip: lib\n\t$$(MAKE) -C ip ip\nmisc/ss: lib\n\t$$(MAKE) -C misc ss\n' >> $(IPROUTE2_PATH)/Makefile
-+	touch $@
-+
-+$(IPROUTE2_PATH)/ip/ip: | $(IPROUTE2_PATH)/.installed $(LIBMNL_PATH)/src/.libs/libmnl.a $(USERSPACE_DEPS)
-+	LDFLAGS="$(LDFLAGS) -L$(LIBMNL_PATH)/src/.libs" PKG_CONFIG_LIBDIR="$(LIBMNL_PATH)" $(MAKE) -C $(IPROUTE2_PATH) PREFIX=/ ip/ip
-+	$(STRIP) -s $(IPROUTE2_PATH)/ip/ip
-+
-+$(IPROUTE2_PATH)/misc/ss: | $(IPROUTE2_PATH)/.installed $(LIBMNL_PATH)/src/.libs/libmnl.a $(USERSPACE_DEPS)
-+	LDFLAGS="$(LDFLAGS) -L$(LIBMNL_PATH)/src/.libs" PKG_CONFIG_LIBDIR="$(LIBMNL_PATH)" $(MAKE) -C $(IPROUTE2_PATH) PREFIX=/ misc/ss
-+	$(STRIP) -s $(IPROUTE2_PATH)/misc/ss
-+
-+$(IPTABLES_PATH)/.installed: $(IPTABLES_TAR)
-+	mkdir -p $(BUILD_PATH)
-+	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
-+	sed -i -e "/nfnetlink=[01]/s:=[01]:=0:" -e "/nfconntrack=[01]/s:=[01]:=0:" $(IPTABLES_PATH)/configure
-+	touch $@
-+
-+$(IPTABLES_PATH)/iptables/xtables-multi: | $(IPTABLES_PATH)/.installed $(LIBMNL_PATH)/src/.libs/libmnl.a $(USERSPACE_DEPS)
-+	cd $(IPTABLES_PATH) && PKG_CONFIG_LIBDIR="$(LIBMNL_PATH)" ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared --disable-nftables --disable-bpf-compiler --disable-nfsynproxy --disable-libipq --with-kernel=$(BUILD_PATH)/include
-+	$(MAKE) -C $(IPTABLES_PATH)
-+	$(STRIP) -s $@
-+
-+$(NMAP_PATH)/.installed: $(NMAP_TAR)
-+	mkdir -p $(BUILD_PATH)
-+	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
-+	touch $@
-+
-+$(NMAP_PATH)/ncat/ncat: | $(NMAP_PATH)/.installed $(USERSPACE_DEPS)
-+	cd $(NMAP_PATH) && ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared --without-ndiff --without-zenmap --without-nping --with-libpcap=included --with-libpcre=included --with-libdnet=included --without-liblua --with-liblinear=included --without-nmap-update --without-openssl --with-pcap=linux
-+	$(MAKE) -C $(NMAP_PATH) build-ncat
-+	$(STRIP) -s $@
-+
-+clean:
-+	rm -rf $(BUILD_PATH)
-+
-+distclean: clean
-+	rm -rf $(DISTFILES_PATH)
-+
-+menuconfig: $(KERNEL_BUILD_PATH)/.config
-+	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) CC="$(NOPIE_GCC)" menuconfig
-+
-+.PHONY: qemu build clean distclean menuconfig
-+.DELETE_ON_ERROR:
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/arch/aarch64.config
-@@ -0,0 +1,5 @@
-+CONFIG_SERIAL_AMBA_PL011=y
-+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
-+CONFIG_FRAME_WARN=1280
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config
-@@ -0,0 +1,6 @@
-+CONFIG_CPU_BIG_ENDIAN=y
-+CONFIG_SERIAL_AMBA_PL011=y
-+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
-+CONFIG_FRAME_WARN=1280
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/arch/arm.config
-@@ -0,0 +1,9 @@
-+CONFIG_MMU=y
-+CONFIG_ARCH_MULTI_V7=y
-+CONFIG_ARCH_VIRT=y
-+CONFIG_THUMB2_KERNEL=n
-+CONFIG_SERIAL_AMBA_PL011=y
-+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
-+CONFIG_FRAME_WARN=1024
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/arch/armeb.config
-@@ -0,0 +1,10 @@
-+CONFIG_MMU=y
-+CONFIG_ARCH_MULTI_V7=y
-+CONFIG_ARCH_VIRT=y
-+CONFIG_THUMB2_KERNEL=n
-+CONFIG_SERIAL_AMBA_PL011=y
-+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
-+CONFIG_CPU_BIG_ENDIAN=y
-+CONFIG_FRAME_WARN=1024
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/arch/i686.config
-@@ -0,0 +1,5 @@
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
-+CONFIG_FRAME_WARN=1024
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/arch/m68k.config
-@@ -0,0 +1,9 @@
-+CONFIG_MMU=y
-+CONFIG_M68040=y
-+CONFIG_MAC=y
-+CONFIG_SERIAL_PMACZILOG=y
-+CONFIG_SERIAL_PMACZILOG_TTYS=y
-+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
-+CONFIG_FRAME_WARN=1024
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/arch/mips.config
-@@ -0,0 +1,11 @@
-+CONFIG_CPU_MIPS32_R2=y
-+CONFIG_MIPS_MALTA=y
-+CONFIG_MIPS_CPS=y
-+CONFIG_MIPS_FP_SUPPORT=y
-+CONFIG_POWER_RESET=y
-+CONFIG_POWER_RESET_SYSCON=y
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
-+CONFIG_FRAME_WARN=1024
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/arch/mips64.config
-@@ -0,0 +1,14 @@
-+CONFIG_64BIT=y
-+CONFIG_CPU_MIPS64_R2=y
-+CONFIG_MIPS32_N32=y
-+CONFIG_CPU_HAS_MSA=y
-+CONFIG_MIPS_MALTA=y
-+CONFIG_MIPS_CPS=y
-+CONFIG_MIPS_FP_SUPPORT=y
-+CONFIG_POWER_RESET=y
-+CONFIG_POWER_RESET_SYSCON=y
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
-+CONFIG_FRAME_WARN=1280
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/arch/mips64el.config
-@@ -0,0 +1,15 @@
-+CONFIG_64BIT=y
-+CONFIG_CPU_MIPS64_R2=y
-+CONFIG_MIPS32_N32=y
-+CONFIG_CPU_HAS_MSA=y
-+CONFIG_MIPS_MALTA=y
-+CONFIG_CPU_LITTLE_ENDIAN=y
-+CONFIG_MIPS_CPS=y
-+CONFIG_MIPS_FP_SUPPORT=y
-+CONFIG_POWER_RESET=y
-+CONFIG_POWER_RESET_SYSCON=y
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
-+CONFIG_FRAME_WARN=1280
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/arch/mipsel.config
-@@ -0,0 +1,12 @@
-+CONFIG_CPU_MIPS32_R2=y
-+CONFIG_MIPS_MALTA=y
-+CONFIG_CPU_LITTLE_ENDIAN=y
-+CONFIG_MIPS_CPS=y
-+CONFIG_MIPS_FP_SUPPORT=y
-+CONFIG_POWER_RESET=y
-+CONFIG_POWER_RESET_SYSCON=y
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
-+CONFIG_FRAME_WARN=1024
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/arch/powerpc.config
-@@ -0,0 +1,10 @@
-+CONFIG_PPC_QEMU_E500=y
-+CONFIG_FSL_SOC_BOOKE=y
-+CONFIG_PPC_85xx=y
-+CONFIG_PHYS_64BIT=y
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_MATH_EMULATION=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
-+CONFIG_FRAME_WARN=1024
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config
-@@ -0,0 +1,12 @@
-+CONFIG_PPC64=y
-+CONFIG_PPC_PSERIES=y
-+CONFIG_ALTIVEC=y
-+CONFIG_VSX=y
-+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-+CONFIG_PPC_RADIX_MMU=y
-+CONFIG_HVC_CONSOLE=y
-+CONFIG_CPU_LITTLE_ENDIAN=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="console=hvc0 wg.success=hvc1"
-+CONFIG_SECTION_MISMATCH_WARN_ONLY=y
-+CONFIG_FRAME_WARN=1280
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/arch/x86_64.config
-@@ -0,0 +1,5 @@
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
-+CONFIG_FRAME_WARN=1280
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/debug.config
-@@ -0,0 +1,67 @@
-+CONFIG_LOCALVERSION="-debug"
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_FRAME_POINTER=y
-+CONFIG_STACK_VALIDATION=y
-+CONFIG_DEBUG_KERNEL=y
-+CONFIG_DEBUG_INFO=y
-+CONFIG_DEBUG_INFO_DWARF4=y
-+CONFIG_PAGE_EXTENSION=y
-+CONFIG_PAGE_POISONING=y
-+CONFIG_DEBUG_OBJECTS=y
-+CONFIG_DEBUG_OBJECTS_FREE=y
-+CONFIG_DEBUG_OBJECTS_TIMERS=y
-+CONFIG_DEBUG_OBJECTS_WORK=y
-+CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-+CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
-+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
-+CONFIG_SLUB_DEBUG_ON=y
-+CONFIG_DEBUG_VM=y
-+CONFIG_DEBUG_MEMORY_INIT=y
-+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-+CONFIG_DEBUG_STACKOVERFLOW=y
-+CONFIG_HAVE_ARCH_KMEMCHECK=y
-+CONFIG_HAVE_ARCH_KASAN=y
-+CONFIG_KASAN=y
-+CONFIG_KASAN_INLINE=y
-+CONFIG_UBSAN=y
-+CONFIG_UBSAN_SANITIZE_ALL=y
-+CONFIG_UBSAN_NO_ALIGNMENT=y
-+CONFIG_UBSAN_NULL=y
-+CONFIG_DEBUG_KMEMLEAK=y
-+CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=8192
-+CONFIG_DEBUG_STACK_USAGE=y
-+CONFIG_DEBUG_SHIRQ=y
-+CONFIG_WQ_WATCHDOG=y
-+CONFIG_SCHED_DEBUG=y
-+CONFIG_SCHED_INFO=y
-+CONFIG_SCHEDSTATS=y
-+CONFIG_SCHED_STACK_END_CHECK=y
-+CONFIG_DEBUG_TIMEKEEPING=y
-+CONFIG_TIMER_STATS=y
-+CONFIG_DEBUG_PREEMPT=y
-+CONFIG_DEBUG_RT_MUTEXES=y
-+CONFIG_DEBUG_SPINLOCK=y
-+CONFIG_DEBUG_MUTEXES=y
-+CONFIG_DEBUG_LOCK_ALLOC=y
-+CONFIG_PROVE_LOCKING=y
-+CONFIG_LOCKDEP=y
-+CONFIG_DEBUG_ATOMIC_SLEEP=y
-+CONFIG_TRACE_IRQFLAGS=y
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_DEBUG_LIST=y
-+CONFIG_DEBUG_PI_LIST=y
-+CONFIG_PROVE_RCU=y
-+CONFIG_SPARSE_RCU_POINTER=y
-+CONFIG_RCU_CPU_STALL_TIMEOUT=21
-+CONFIG_RCU_TRACE=y
-+CONFIG_RCU_EQS_DEBUG=y
-+CONFIG_USER_STACKTRACE_SUPPORT=y
-+CONFIG_DEBUG_SG=y
-+CONFIG_DEBUG_NOTIFIERS=y
-+CONFIG_DOUBLEFAULT=y
-+CONFIG_X86_DEBUG_FPU=y
-+CONFIG_DEBUG_SECTION_MISMATCH=y
-+CONFIG_DEBUG_PAGEALLOC=y
-+CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
-+CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/init.c
-@@ -0,0 +1,284 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
-+ */
-+
-+#define _GNU_SOURCE
-+#include <unistd.h>
-+#include <errno.h>
-+#include <string.h>
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <stdbool.h>
-+#include <fcntl.h>
-+#include <sys/wait.h>
-+#include <sys/mount.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+#include <sys/types.h>
-+#include <sys/io.h>
-+#include <sys/ioctl.h>
-+#include <sys/reboot.h>
-+#include <sys/utsname.h>
-+#include <sys/sendfile.h>
-+#include <linux/random.h>
-+#include <linux/version.h>
-+
-+__attribute__((noreturn)) static void poweroff(void)
-+{
-+	fflush(stdout);
-+	fflush(stderr);
-+	reboot(RB_AUTOBOOT);
-+	sleep(30);
-+	fprintf(stderr, "\x1b[37m\x1b[41m\x1b[1mFailed to power off!!!\x1b[0m\n");
-+	exit(1);
-+}
-+
-+static void panic(const char *what)
-+{
-+	fprintf(stderr, "\n\n\x1b[37m\x1b[41m\x1b[1mSOMETHING WENT HORRIBLY WRONG\x1b[0m\n\n    \x1b[31m\x1b[1m%s: %s\x1b[0m\n\n\x1b[37m\x1b[44m\x1b[1mPower off...\x1b[0m\n\n", what, strerror(errno));
-+	poweroff();
-+}
-+
-+#define pretty_message(msg) puts("\x1b[32m\x1b[1m" msg "\x1b[0m")
-+
-+static void print_banner(void)
-+{
-+	struct utsname utsname;
-+	int len;
-+
-+	if (uname(&utsname) < 0)
-+		panic("uname");
-+
-+	len = strlen("    WireGuard Test Suite on       ") + strlen(utsname.sysname) + strlen(utsname.release) + strlen(utsname.machine);
-+	printf("\x1b[45m\x1b[33m\x1b[1m%*.s\x1b[0m\n\x1b[45m\x1b[33m\x1b[1m    WireGuard Test Suite on %s %s %s    \x1b[0m\n\x1b[45m\x1b[33m\x1b[1m%*.s\x1b[0m\n\n", len, "", utsname.sysname, utsname.release, utsname.machine, len, "");
-+}
-+
-+static void seed_rng(void)
-+{
-+	int fd;
-+	struct {
-+		int entropy_count;
-+		int buffer_size;
-+		unsigned char buffer[256];
-+	} entropy = {
-+		.entropy_count = sizeof(entropy.buffer) * 8,
-+		.buffer_size = sizeof(entropy.buffer),
-+		.buffer = "Adding real entropy is not actually important for these tests. Don't try this at home, kids!"
-+	};
-+
-+	if (mknod("/dev/urandom", S_IFCHR | 0644, makedev(1, 9)))
-+		panic("mknod(/dev/urandom)");
-+	fd = open("/dev/urandom", O_WRONLY);
-+	if (fd < 0)
-+		panic("open(urandom)");
-+	for (int i = 0; i < 256; ++i) {
-+		if (ioctl(fd, RNDADDENTROPY, &entropy) < 0)
-+			panic("ioctl(urandom)");
-+	}
-+	close(fd);
-+}
-+
-+static void mount_filesystems(void)
-+{
-+	pretty_message("[+] Mounting filesystems...");
-+	mkdir("/dev", 0755);
-+	mkdir("/proc", 0755);
-+	mkdir("/sys", 0755);
-+	mkdir("/tmp", 0755);
-+	mkdir("/run", 0755);
-+	mkdir("/var", 0755);
-+	if (mount("none", "/dev", "devtmpfs", 0, NULL))
-+		panic("devtmpfs mount");
-+	if (mount("none", "/proc", "proc", 0, NULL))
-+		panic("procfs mount");
-+	if (mount("none", "/sys", "sysfs", 0, NULL))
-+		panic("sysfs mount");
-+	if (mount("none", "/tmp", "tmpfs", 0, NULL))
-+		panic("tmpfs mount");
-+	if (mount("none", "/run", "tmpfs", 0, NULL))
-+		panic("tmpfs mount");
-+	if (mount("none", "/sys/kernel/debug", "debugfs", 0, NULL))
-+		; /* Not a problem if it fails.*/
-+	if (symlink("/run", "/var/run"))
-+		panic("run symlink");
-+	if (symlink("/proc/self/fd", "/dev/fd"))
-+		panic("fd symlink");
-+}
-+
-+static void enable_logging(void)
-+{
-+	int fd;
-+	pretty_message("[+] Enabling logging...");
-+	fd = open("/proc/sys/kernel/printk", O_WRONLY);
-+	if (fd >= 0) {
-+		if (write(fd, "9\n", 2) != 2)
-+			panic("write(printk)");
-+		close(fd);
-+	}
-+	fd = open("/proc/sys/debug/exception-trace", O_WRONLY);
-+	if (fd >= 0) {
-+		if (write(fd, "1\n", 2) != 2)
-+			panic("write(exception-trace)");
-+		close(fd);
-+	}
-+	fd = open("/proc/sys/kernel/panic_on_warn", O_WRONLY);
-+	if (fd >= 0) {
-+		if (write(fd, "1\n", 2) != 2)
-+			panic("write(panic_on_warn)");
-+		close(fd);
-+	}
-+}
-+
-+static void kmod_selftests(void)
-+{
-+	FILE *file;
-+	char line[2048], *start, *pass;
-+	bool success = true;
-+	pretty_message("[+] Module self-tests:");
-+	file = fopen("/proc/kmsg", "r");
-+	if (!file)
-+		panic("fopen(kmsg)");
-+	if (fcntl(fileno(file), F_SETFL, O_NONBLOCK) < 0)
-+		panic("fcntl(kmsg, nonblock)");
-+	while (fgets(line, sizeof(line), file)) {
-+		start = strstr(line, "wireguard: ");
-+		if (!start)
-+			continue;
-+		start += 11;
-+		*strchrnul(start, '\n') = '\0';
-+		if (strstr(start, "www.wireguard.com"))
-+			break;
-+		pass = strstr(start, ": pass");
-+		if (!pass || pass[6] != '\0') {
-+			success = false;
-+			printf(" \x1b[31m*  %s\x1b[0m\n", start);
-+		} else
-+			printf(" \x1b[32m*  %s\x1b[0m\n", start);
-+	}
-+	fclose(file);
-+	if (!success) {
-+		puts("\x1b[31m\x1b[1m[-] Tests failed! \u2639\x1b[0m");
-+		poweroff();
-+	}
-+}
-+
-+static void launch_tests(void)
-+{
-+	char cmdline[4096], *success_dev;
-+	int status, fd;
-+	pid_t pid;
-+
-+	pretty_message("[+] Launching tests...");
-+	pid = fork();
-+	if (pid == -1)
-+		panic("fork");
-+	else if (pid == 0) {
-+		execl("/init.sh", "init", NULL);
-+		panic("exec");
-+	}
-+	if (waitpid(pid, &status, 0) < 0)
-+		panic("waitpid");
-+	if (WIFEXITED(status) && WEXITSTATUS(status) == 0) {
-+		pretty_message("[+] Tests successful! :-)");
-+		fd = open("/proc/cmdline", O_RDONLY);
-+		if (fd < 0)
-+			panic("open(/proc/cmdline)");
-+		if (read(fd, cmdline, sizeof(cmdline) - 1) <= 0)
-+			panic("read(/proc/cmdline)");
-+		cmdline[sizeof(cmdline) - 1] = '\0';
-+		for (success_dev = strtok(cmdline, " \n"); success_dev; success_dev = strtok(NULL, " \n")) {
-+			if (strncmp(success_dev, "wg.success=", 11))
-+				continue;
-+			memcpy(success_dev + 11 - 5, "/dev/", 5);
-+			success_dev += 11 - 5;
-+			break;
-+		}
-+		if (!success_dev || !strlen(success_dev))
-+			panic("Unable to find success device");
-+
-+		fd = open(success_dev, O_WRONLY);
-+		if (fd < 0)
-+			panic("open(success_dev)");
-+		if (write(fd, "success\n", 8) != 8)
-+			panic("write(success_dev)");
-+		close(fd);
-+	} else {
-+		const char *why = "unknown cause";
-+		int what = -1;
-+
-+		if (WIFEXITED(status)) {
-+			why = "exit code";
-+			what = WEXITSTATUS(status);
-+		} else if (WIFSIGNALED(status)) {
-+			why = "signal";
-+			what = WTERMSIG(status);
-+		}
-+		printf("\x1b[31m\x1b[1m[-] Tests failed with %s %d! \u2639\x1b[0m\n", why, what);
-+	}
-+}
-+
-+static void ensure_console(void)
-+{
-+	for (unsigned int i = 0; i < 1000; ++i) {
-+		int fd = open("/dev/console", O_RDWR);
-+		if (fd < 0) {
-+			usleep(50000);
-+			continue;
-+		}
-+		dup2(fd, 0);
-+		dup2(fd, 1);
-+		dup2(fd, 2);
-+		close(fd);
-+		if (write(1, "\0\0\0\0\n", 5) == 5)
-+			return;
-+	}
-+	panic("Unable to open console device");
-+}
-+
-+static void clear_leaks(void)
-+{
-+	int fd;
-+
-+	fd = open("/sys/kernel/debug/kmemleak", O_WRONLY);
-+	if (fd < 0)
-+		return;
-+	pretty_message("[+] Starting memory leak detection...");
-+	write(fd, "clear\n", 5);
-+	close(fd);
-+}
-+
-+static void check_leaks(void)
-+{
-+	int fd;
-+
-+	fd = open("/sys/kernel/debug/kmemleak", O_WRONLY);
-+	if (fd < 0)
-+		return;
-+	pretty_message("[+] Scanning for memory leaks...");
-+	sleep(2); /* Wait for any grace periods. */
-+	write(fd, "scan\n", 5);
-+	close(fd);
-+
-+	fd = open("/sys/kernel/debug/kmemleak", O_RDONLY);
-+	if (fd < 0)
-+		return;
-+	if (sendfile(1, fd, NULL, 0x7ffff000) > 0)
-+		panic("Memory leaks encountered");
-+	close(fd);
-+}
-+
-+int main(int argc, char *argv[])
-+{
-+	seed_rng();
-+	ensure_console();
-+	print_banner();
-+	mount_filesystems();
-+	kmod_selftests();
-+	enable_logging();
-+	clear_leaks();
-+	launch_tests();
-+	check_leaks();
-+	poweroff();
-+	return 1;
-+}
---- /dev/null
-+++ b/tools/testing/selftests/wireguard/qemu/kernel.config
-@@ -0,0 +1,86 @@
-+CONFIG_LOCALVERSION=""
-+CONFIG_NET=y
-+CONFIG_NETDEVICES=y
-+CONFIG_NET_CORE=y
-+CONFIG_NET_IPIP=y
-+CONFIG_DUMMY=y
-+CONFIG_VETH=y
-+CONFIG_MULTIUSER=y
-+CONFIG_NAMESPACES=y
-+CONFIG_NET_NS=y
-+CONFIG_UNIX=y
-+CONFIG_INET=y
-+CONFIG_IPV6=y
-+CONFIG_NETFILTER=y
-+CONFIG_NETFILTER_ADVANCED=y
-+CONFIG_NF_CONNTRACK=y
-+CONFIG_NF_NAT=y
-+CONFIG_NETFILTER_XTABLES=y
-+CONFIG_NETFILTER_XT_NAT=y
-+CONFIG_NETFILTER_XT_MATCH_LENGTH=y
-+CONFIG_NF_CONNTRACK_IPV4=y
-+CONFIG_NF_NAT_IPV4=y
-+CONFIG_IP_NF_IPTABLES=y
-+CONFIG_IP_NF_FILTER=y
-+CONFIG_IP_NF_NAT=y
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_IP_MULTIPLE_TABLES=y
-+CONFIG_IPV6_MULTIPLE_TABLES=y
-+CONFIG_TTY=y
-+CONFIG_BINFMT_ELF=y
-+CONFIG_BINFMT_SCRIPT=y
-+CONFIG_VDSO=y
-+CONFIG_VIRTUALIZATION=y
-+CONFIG_HYPERVISOR_GUEST=y
-+CONFIG_PARAVIRT=y
-+CONFIG_KVM_GUEST=y
-+CONFIG_PARAVIRT_SPINLOCKS=y
-+CONFIG_PRINTK=y
-+CONFIG_KALLSYMS=y
-+CONFIG_BUG=y
-+CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
-+CONFIG_EMBEDDED=n
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_SHMEM=y
-+CONFIG_SLUB=y
-+CONFIG_SPARSEMEM_VMEMMAP=y
-+CONFIG_SMP=y
-+CONFIG_SCHED_SMT=y
-+CONFIG_SCHED_MC=y
-+CONFIG_NUMA=y
-+CONFIG_PREEMPT=y
-+CONFIG_NO_HZ=y
-+CONFIG_NO_HZ_IDLE=y
-+CONFIG_NO_HZ_FULL=n
-+CONFIG_HZ_PERIODIC=n
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_ARCH_RANDOM=y
-+CONFIG_FILE_LOCKING=y
-+CONFIG_POSIX_TIMERS=y
-+CONFIG_DEVTMPFS=y
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
-+CONFIG_PRINTK_TIME=y
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_LEGACY_VSYSCALL_NONE=y
-+CONFIG_KERNEL_GZIP=y
-+CONFIG_PANIC_ON_OOPS=y
-+CONFIG_BUG_ON_DATA_CORRUPTION=y
-+CONFIG_LOCKUP_DETECTOR=y
-+CONFIG_SOFTLOCKUP_DETECTOR=y
-+CONFIG_HARDLOCKUP_DETECTOR=y
-+CONFIG_WQ_WATCHDOG=y
-+CONFIG_DETECT_HUNG_TASK=y
-+CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
-+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-+CONFIG_PANIC_TIMEOUT=-1
-+CONFIG_STACKTRACE=y
-+CONFIG_EARLY_PRINTK=y
-+CONFIG_GDB_SCRIPTS=y
-+CONFIG_WIREGUARD=y
-+CONFIG_WIREGUARD_DEBUG=y
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0074-wireguard-Kconfig-select-parent-dependency-for-crypt.patch b/target/linux/generic/backport-5.4/080-wireguard-0074-wireguard-Kconfig-select-parent-dependency-for-crypt.patch
deleted file mode 100644
index c2f8f77f53..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0074-wireguard-Kconfig-select-parent-dependency-for-crypt.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Sun, 15 Dec 2019 22:08:01 +0100
-Subject: [PATCH] wireguard: Kconfig: select parent dependency for crypto
-
-commit d7c68a38bb4f9b7c1a2e4a772872c752ee5c44a6 upstream.
-
-This fixes the crypto selection submenu depenencies. Otherwise, we'd
-wind up issuing warnings in which certain dependencies we also select
-couldn't be satisfied. This condition was triggered by the addition of
-the test suite autobuilder in the previous commit.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -85,6 +85,8 @@ config WIREGUARD
- 	select CRYPTO_POLY1305_X86_64 if X86 && 64BIT
- 	select CRYPTO_BLAKE2S_X86 if X86 && 64BIT
- 	select CRYPTO_CURVE25519_X86 if X86 && 64BIT
-+	select ARM_CRYPTO if ARM
-+	select ARM64_CRYPTO if ARM64
- 	select CRYPTO_CHACHA20_NEON if (ARM || ARM64) && KERNEL_MODE_NEON
- 	select CRYPTO_POLY1305_NEON if ARM64 && KERNEL_MODE_NEON
- 	select CRYPTO_POLY1305_ARM if ARM
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0075-wireguard-global-fix-spelling-mistakes-in-comments.patch b/target/linux/generic/backport-5.4/080-wireguard-0075-wireguard-global-fix-spelling-mistakes-in-comments.patch
deleted file mode 100644
index 9b34e663a9..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0075-wireguard-global-fix-spelling-mistakes-in-comments.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Josh Soref <jsoref@gmail.com>
-Date: Sun, 15 Dec 2019 22:08:02 +0100
-Subject: [PATCH] wireguard: global: fix spelling mistakes in comments
-
-commit a2ec8b5706944d228181c8b91d815f41d6dd8e7b upstream.
-
-This fixes two spelling errors in source code comments.
-
-Signed-off-by: Josh Soref <jsoref@gmail.com>
-[Jason: rewrote commit message]
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/receive.c | 2 +-
- include/uapi/linux/wireguard.h  | 8 ++++----
- 2 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/net/wireguard/receive.c
-+++ b/drivers/net/wireguard/receive.c
-@@ -380,7 +380,7 @@ static void wg_packet_consume_data_done(
- 	/* We've already verified the Poly1305 auth tag, which means this packet
- 	 * was not modified in transit. We can therefore tell the networking
- 	 * stack that all checksums of every layer of encapsulation have already
--	 * been checked "by the hardware" and therefore is unneccessary to check
-+	 * been checked "by the hardware" and therefore is unnecessary to check
- 	 * again in software.
- 	 */
- 	skb->ip_summed = CHECKSUM_UNNECESSARY;
---- a/include/uapi/linux/wireguard.h
-+++ b/include/uapi/linux/wireguard.h
-@@ -18,13 +18,13 @@
-  * one but not both of:
-  *
-  *    WGDEVICE_A_IFINDEX: NLA_U32
-- *    WGDEVICE_A_IFNAME: NLA_NUL_STRING, maxlen IFNAMESIZ - 1
-+ *    WGDEVICE_A_IFNAME: NLA_NUL_STRING, maxlen IFNAMSIZ - 1
-  *
-  * The kernel will then return several messages (NLM_F_MULTI) containing the
-  * following tree of nested items:
-  *
-  *    WGDEVICE_A_IFINDEX: NLA_U32
-- *    WGDEVICE_A_IFNAME: NLA_NUL_STRING, maxlen IFNAMESIZ - 1
-+ *    WGDEVICE_A_IFNAME: NLA_NUL_STRING, maxlen IFNAMSIZ - 1
-  *    WGDEVICE_A_PRIVATE_KEY: NLA_EXACT_LEN, len WG_KEY_LEN
-  *    WGDEVICE_A_PUBLIC_KEY: NLA_EXACT_LEN, len WG_KEY_LEN
-  *    WGDEVICE_A_LISTEN_PORT: NLA_U16
-@@ -77,7 +77,7 @@
-  * WGDEVICE_A_IFINDEX and WGDEVICE_A_IFNAME:
-  *
-  *    WGDEVICE_A_IFINDEX: NLA_U32
-- *    WGDEVICE_A_IFNAME: NLA_NUL_STRING, maxlen IFNAMESIZ - 1
-+ *    WGDEVICE_A_IFNAME: NLA_NUL_STRING, maxlen IFNAMSIZ - 1
-  *    WGDEVICE_A_FLAGS: NLA_U32, 0 or WGDEVICE_F_REPLACE_PEERS if all current
-  *                      peers should be removed prior to adding the list below.
-  *    WGDEVICE_A_PRIVATE_KEY: len WG_KEY_LEN, all zeros to remove
-@@ -121,7 +121,7 @@
-  * filling in information not contained in the prior. Note that if
-  * WGDEVICE_F_REPLACE_PEERS is specified in the first message, it probably
-  * should not be specified in fragments that come after, so that the list
-- * of peers is only cleared the first time but appened after. Likewise for
-+ * of peers is only cleared the first time but appended after. Likewise for
-  * peers, if WGPEER_F_REPLACE_ALLOWEDIPS is specified in the first message
-  * of a peer, it likely should not be specified in subsequent fragments.
-  *
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0076-wireguard-main-remove-unused-include-linux-version.h.patch b/target/linux/generic/backport-5.4/080-wireguard-0076-wireguard-main-remove-unused-include-linux-version.h.patch
deleted file mode 100644
index 3cc0b56c3e..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0076-wireguard-main-remove-unused-include-linux-version.h.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: YueHaibing <yuehaibing@huawei.com>
-Date: Sun, 15 Dec 2019 22:08:03 +0100
-Subject: [PATCH] wireguard: main: remove unused include <linux/version.h>
-
-commit 43967b6ff91e53bcce5ae08c16a0588a475b53a1 upstream.
-
-Remove <linux/version.h> from the includes for main.c, which is unused.
-
-Signed-off-by: YueHaibing <yuehaibing@huawei.com>
-[Jason: reworded commit message]
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/main.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/net/wireguard/main.c
-+++ b/drivers/net/wireguard/main.c
-@@ -12,7 +12,6 @@
- 
- #include <uapi/linux/wireguard.h>
- 
--#include <linux/version.h>
- #include <linux/init.h>
- #include <linux/module.h>
- #include <linux/genetlink.h>
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0077-wireguard-allowedips-use-kfree_rcu-instead-of-call_r.patch b/target/linux/generic/backport-5.4/080-wireguard-0077-wireguard-allowedips-use-kfree_rcu-instead-of-call_r.patch
deleted file mode 100644
index edd90484dd..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0077-wireguard-allowedips-use-kfree_rcu-instead-of-call_r.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Wei Yongjun <weiyongjun1@huawei.com>
-Date: Sun, 15 Dec 2019 22:08:04 +0100
-Subject: [PATCH] wireguard: allowedips: use kfree_rcu() instead of call_rcu()
-
-commit d89ee7d5c73af15c1c6f12b016cdf469742b5726 upstream.
-
-The callback function of call_rcu() just calls a kfree(), so we
-can use kfree_rcu() instead of call_rcu() + callback function.
-
-Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/allowedips.c | 7 +------
- 1 file changed, 1 insertion(+), 6 deletions(-)
-
---- a/drivers/net/wireguard/allowedips.c
-+++ b/drivers/net/wireguard/allowedips.c
-@@ -31,11 +31,6 @@ static void copy_and_assign_cidr(struct
- #define CHOOSE_NODE(parent, key) \
- 	parent->bit[(key[parent->bit_at_a] >> parent->bit_at_b) & 1]
- 
--static void node_free_rcu(struct rcu_head *rcu)
--{
--	kfree(container_of(rcu, struct allowedips_node, rcu));
--}
--
- static void push_rcu(struct allowedips_node **stack,
- 		     struct allowedips_node __rcu *p, unsigned int *len)
- {
-@@ -112,7 +107,7 @@ static void walk_remove_by_peer(struct a
- 				if (!node->bit[0] || !node->bit[1]) {
- 					rcu_assign_pointer(*nptr, DEREF(
- 					       &node->bit[!REF(node->bit[0])]));
--					call_rcu(&node->rcu, node_free_rcu);
-+					kfree_rcu(node, rcu);
- 					node = DEREF(nptr);
- 				}
- 			}
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0078-wireguard-selftests-remove-ancient-kernel-compatibil.patch b/target/linux/generic/backport-5.4/080-wireguard-0078-wireguard-selftests-remove-ancient-kernel-compatibil.patch
deleted file mode 100644
index 6ff0dd9d10..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0078-wireguard-selftests-remove-ancient-kernel-compatibil.patch
+++ /dev/null
@@ -1,373 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Thu, 2 Jan 2020 17:47:49 +0100
-Subject: [PATCH] wireguard: selftests: remove ancient kernel compatibility
- code
-
-commit 9a69a4c8802adf642bc4a13d471b5a86b44ed434 upstream.
-
-Quite a bit of the test suite was designed to work with ancient kernels.
-Thankfully we no longer have to deal with this. This commit updates
-things that we can finally update and removes things that we can finally
-remove, to avoid the build-up of the last several years as a result of
-having to support ancient kernels. We can finally rely on suppress_
-prefixlength being available. On the build side of things, the no-PIE
-hack is no longer required, and we can bump some of the tools, repair
-our m68k and i686-kvm support, and get better coverage of the static
-branches used in the crypto lib and in udp_tunnel.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- tools/testing/selftests/wireguard/netns.sh    | 11 +--
- .../testing/selftests/wireguard/qemu/Makefile | 82 ++++++++++---------
- .../selftests/wireguard/qemu/arch/m68k.config |  2 +-
- tools/testing/selftests/wireguard/qemu/init.c |  1 +
- .../selftests/wireguard/qemu/kernel.config    |  2 +
- 5 files changed, 50 insertions(+), 48 deletions(-)
-
---- a/tools/testing/selftests/wireguard/netns.sh
-+++ b/tools/testing/selftests/wireguard/netns.sh
-@@ -37,7 +37,7 @@ n2() { pretty 2 "$*"; maybe_exec ip netn
- ip0() { pretty 0 "ip $*"; ip -n $netns0 "$@"; }
- ip1() { pretty 1 "ip $*"; ip -n $netns1 "$@"; }
- ip2() { pretty 2 "ip $*"; ip -n $netns2 "$@"; }
--sleep() { read -t "$1" -N 0 || true; }
-+sleep() { read -t "$1" -N 1 || true; }
- waitiperf() { pretty "${1//*-}" "wait for iperf:5201"; while [[ $(ss -N "$1" -tlp 'sport = 5201') != *iperf3* ]]; do sleep 0.1; done; }
- waitncatudp() { pretty "${1//*-}" "wait for udp:1111"; while [[ $(ss -N "$1" -ulp 'sport = 1111') != *ncat* ]]; do sleep 0.1; done; }
- waitncattcp() { pretty "${1//*-}" "wait for tcp:1111"; while [[ $(ss -N "$1" -tlp 'sport = 1111') != *ncat* ]]; do sleep 0.1; done; }
-@@ -294,12 +294,9 @@ ip1 -6 rule add table main suppress_pref
- ip1 -4 route add default dev wg0 table 51820
- ip1 -4 rule add not fwmark 51820 table 51820
- ip1 -4 rule add table main suppress_prefixlength 0
--# suppress_prefixlength only got added in 3.12, and we want to support 3.10+.
--if [[ $(ip1 -4 rule show all) == *suppress_prefixlength* ]]; then
--	# Flood the pings instead of sending just one, to trigger routing table reference counting bugs.
--	n1 ping -W 1 -c 100 -f 192.168.99.7
--	n1 ping -W 1 -c 100 -f abab::1111
--fi
-+# Flood the pings instead of sending just one, to trigger routing table reference counting bugs.
-+n1 ping -W 1 -c 100 -f 192.168.99.7
-+n1 ping -W 1 -c 100 -f abab::1111
- 
- n0 iptables -t nat -F
- ip0 link del vethrc
---- a/tools/testing/selftests/wireguard/qemu/Makefile
-+++ b/tools/testing/selftests/wireguard/qemu/Makefile
-@@ -5,6 +5,7 @@
- PWD := $(shell pwd)
- 
- CHOST := $(shell gcc -dumpmachine)
-+HOST_ARCH := $(firstword $(subst -, ,$(CHOST)))
- ifneq (,$(ARCH))
- CBUILD := $(subst -gcc,,$(lastword $(subst /, ,$(firstword $(wildcard $(foreach bindir,$(subst :, ,$(PATH)),$(bindir)/$(ARCH)-*-gcc))))))
- ifeq (,$(CBUILD))
-@@ -37,19 +38,19 @@ endef
- define file_download =
- $(DISTFILES_PATH)/$(1):
- 	mkdir -p $(DISTFILES_PATH)
--	flock -x $$@.lock -c '[ -f $$@ ] && exit 0; wget -O $$@.tmp $(MIRROR)$(1) || wget -t inf --retry-on-http-error=404 -O $$@.tmp $(2)$(1) || rm -f $$@.tmp'
-+	flock -x $$@.lock -c '[ -f $$@ ] && exit 0; wget -O $$@.tmp $(MIRROR)$(1) || wget -O $$@.tmp $(2)$(1) || rm -f $$@.tmp'
- 	if echo "$(3)  $$@.tmp" | sha256sum -c -; then mv $$@.tmp $$@; else rm -f $$@.tmp; exit 71; fi
- endef
- 
--$(eval $(call tar_download,MUSL,musl,1.1.20,.tar.gz,https://www.musl-libc.org/releases/,44be8771d0e6c6b5f82dd15662eb2957c9a3173a19a8b49966ac0542bbd40d61))
-+$(eval $(call tar_download,MUSL,musl,1.1.24,.tar.gz,https://www.musl-libc.org/releases/,1370c9a812b2cf2a7d92802510cca0058cc37e66a7bedd70051f0a34015022a3))
- $(eval $(call tar_download,LIBMNL,libmnl,1.0.4,.tar.bz2,https://www.netfilter.org/projects/libmnl/files/,171f89699f286a5854b72b91d06e8f8e3683064c5901fb09d954a9ab6f551f81))
--$(eval $(call tar_download,IPERF,iperf,3.1.7,.tar.gz,http://downloads.es.net/pub/iperf/,a4ef73406fe92250602b8da2ae89ec53211f805df97a1d1d629db5a14043734f))
-+$(eval $(call tar_download,IPERF,iperf,3.7,.tar.gz,https://downloads.es.net/pub/iperf/,d846040224317caf2f75c843d309a950a7db23f9b44b94688ccbe557d6d1710c))
- $(eval $(call tar_download,BASH,bash,5.0,.tar.gz,https://ftp.gnu.org/gnu/bash/,b4a80f2ac66170b2913efbfb9f2594f1f76c7b1afd11f799e22035d63077fb4d))
--$(eval $(call tar_download,IPROUTE2,iproute2,5.1.0,.tar.gz,https://www.kernel.org/pub/linux/utils/net/iproute2/,9b43707d6075ecdca14803ca8ce0c8553848c49fa1586d12fd508d66577243f2))
--$(eval $(call tar_download,IPTABLES,iptables,1.6.1,.tar.bz2,https://www.netfilter.org/projects/iptables/files/,0fc2d7bd5d7be11311726466789d4c65fb4c8e096c9182b56ce97440864f0cf5))
--$(eval $(call tar_download,NMAP,nmap,7.60,.tar.bz2,https://nmap.org/dist/,a8796ecc4fa6c38aad6139d9515dc8113023a82e9d787e5a5fb5fa1b05516f21))
--$(eval $(call tar_download,IPUTILS,iputils,s20161105,.tar.gz,https://github.com/iputils/iputils/archive/s20161105.tar.gz/#,f813092f03d17294fd23544b129b95cdb87fe19f7970a51908a6b88509acad8a))
--$(eval $(call tar_download,WIREGUARD_TOOLS,WireGuard,0.0.20191212,.tar.xz,https://git.zx2c4.com/WireGuard/snapshot/,b0d718380f7a8822b2f12d75e462fa4eafa3a77871002981f367cd4fe2a1b071))
-+$(eval $(call tar_download,IPROUTE2,iproute2,5.4.0,.tar.xz,https://www.kernel.org/pub/linux/utils/net/iproute2/,fe97aa60a0d4c5ac830be18937e18dc3400ca713a33a89ad896ff1e3d46086ae))
-+$(eval $(call tar_download,IPTABLES,iptables,1.8.4,.tar.bz2,https://www.netfilter.org/projects/iptables/files/,993a3a5490a544c2cbf2ef15cf7e7ed21af1845baf228318d5c36ef8827e157c))
-+$(eval $(call tar_download,NMAP,nmap,7.80,.tar.bz2,https://nmap.org/dist/,fcfa5a0e42099e12e4bf7a68ebe6fde05553383a682e816a7ec9256ab4773faa))
-+$(eval $(call tar_download,IPUTILS,iputils,s20190709,.tar.gz,https://github.com/iputils/iputils/archive/s20190709.tar.gz/#,a15720dd741d7538dd2645f9f516d193636ae4300ff7dbc8bfca757bf166490a))
-+$(eval $(call tar_download,WIREGUARD_TOOLS,wireguard-tools,1.0.20191226,.tar.xz,https://git.zx2c4.com/wireguard-tools/snapshot/,aa8af0fdc9872d369d8c890a84dbc2a2466b55795dccd5b47721b2d97644b04f))
- 
- KERNEL_BUILD_PATH := $(BUILD_PATH)/kernel$(if $(findstring yes,$(DEBUG_KERNEL)),-debug)
- rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d))
-@@ -59,23 +60,21 @@ export CFLAGS ?= -O3 -pipe
- export LDFLAGS ?=
- export CPPFLAGS := -I$(BUILD_PATH)/include
- 
--ifeq ($(CHOST),$(CBUILD))
-+ifeq ($(HOST_ARCH),$(ARCH))
- CROSS_COMPILE_FLAG := --host=$(CHOST)
--NOPIE_GCC := gcc -fno-PIE
- CFLAGS += -march=native
- STRIP := strip
- else
- $(info Cross compilation: building for $(CBUILD) using $(CHOST))
- CROSS_COMPILE_FLAG := --build=$(CBUILD) --host=$(CHOST)
- export CROSS_COMPILE=$(CBUILD)-
--NOPIE_GCC := $(CBUILD)-gcc -fno-PIE
- STRIP := $(CBUILD)-strip
- endif
- ifeq ($(ARCH),aarch64)
- QEMU_ARCH := aarch64
- KERNEL_ARCH := arm64
- KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm64/boot/Image
--ifeq ($(CHOST),$(CBUILD))
-+ifeq ($(HOST_ARCH),$(ARCH))
- QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
- else
- QEMU_MACHINE := -cpu cortex-a53 -machine virt
-@@ -85,7 +84,7 @@ else ifeq ($(ARCH),aarch64_be)
- QEMU_ARCH := aarch64
- KERNEL_ARCH := arm64
- KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm64/boot/Image
--ifeq ($(CHOST),$(CBUILD))
-+ifeq ($(HOST_ARCH),$(ARCH))
- QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
- else
- QEMU_MACHINE := -cpu cortex-a53 -machine virt
-@@ -95,7 +94,7 @@ else ifeq ($(ARCH),arm)
- QEMU_ARCH := arm
- KERNEL_ARCH := arm
- KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm/boot/zImage
--ifeq ($(CHOST),$(CBUILD))
-+ifeq ($(HOST_ARCH),$(ARCH))
- QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
- else
- QEMU_MACHINE := -cpu cortex-a15 -machine virt
-@@ -105,7 +104,7 @@ else ifeq ($(ARCH),armeb)
- QEMU_ARCH := arm
- KERNEL_ARCH := arm
- KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm/boot/zImage
--ifeq ($(CHOST),$(CBUILD))
-+ifeq ($(HOST_ARCH),$(ARCH))
- QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
- else
- QEMU_MACHINE := -cpu cortex-a15 -machine virt
-@@ -116,7 +115,7 @@ else ifeq ($(ARCH),x86_64)
- QEMU_ARCH := x86_64
- KERNEL_ARCH := x86_64
- KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/x86/boot/bzImage
--ifeq ($(CHOST),$(CBUILD))
-+ifeq ($(HOST_ARCH),$(ARCH))
- QEMU_MACHINE := -cpu host -machine q35,accel=kvm
- else
- QEMU_MACHINE := -cpu Skylake-Server -machine q35
-@@ -126,7 +125,7 @@ else ifeq ($(ARCH),i686)
- QEMU_ARCH := i386
- KERNEL_ARCH := x86
- KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/x86/boot/bzImage
--ifeq ($(subst i686,x86_64,$(CBUILD)),$(CHOST))
-+ifeq ($(subst x86_64,i686,$(HOST_ARCH)),$(ARCH))
- QEMU_MACHINE := -cpu host -machine q35,accel=kvm
- else
- QEMU_MACHINE := -cpu coreduo -machine q35
-@@ -136,7 +135,7 @@ else ifeq ($(ARCH),mips64)
- QEMU_ARCH := mips64
- KERNEL_ARCH := mips
- KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
--ifeq ($(CHOST),$(CBUILD))
-+ifeq ($(HOST_ARCH),$(ARCH))
- QEMU_MACHINE := -cpu host -machine malta,accel=kvm
- CFLAGS += -EB
- else
-@@ -147,7 +146,7 @@ else ifeq ($(ARCH),mips64el)
- QEMU_ARCH := mips64el
- KERNEL_ARCH := mips
- KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
--ifeq ($(CHOST),$(CBUILD))
-+ifeq ($(HOST_ARCH),$(ARCH))
- QEMU_MACHINE := -cpu host -machine malta,accel=kvm
- CFLAGS += -EL
- else
-@@ -158,7 +157,7 @@ else ifeq ($(ARCH),mips)
- QEMU_ARCH := mips
- KERNEL_ARCH := mips
- KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
--ifeq ($(CHOST),$(CBUILD))
-+ifeq ($(HOST_ARCH),$(ARCH))
- QEMU_MACHINE := -cpu host -machine malta,accel=kvm
- CFLAGS += -EB
- else
-@@ -169,7 +168,7 @@ else ifeq ($(ARCH),mipsel)
- QEMU_ARCH := mipsel
- KERNEL_ARCH := mips
- KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
--ifeq ($(CHOST),$(CBUILD))
-+ifeq ($(HOST_ARCH),$(ARCH))
- QEMU_MACHINE := -cpu host -machine malta,accel=kvm
- CFLAGS += -EL
- else
-@@ -180,7 +179,7 @@ else ifeq ($(ARCH),powerpc64le)
- QEMU_ARCH := ppc64
- KERNEL_ARCH := powerpc
- KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
--ifeq ($(CHOST),$(CBUILD))
-+ifeq ($(HOST_ARCH),$(ARCH))
- QEMU_MACHINE := -cpu host,accel=kvm -machine pseries
- else
- QEMU_MACHINE := -machine pseries
-@@ -190,7 +189,7 @@ else ifeq ($(ARCH),powerpc)
- QEMU_ARCH := ppc
- KERNEL_ARCH := powerpc
- KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/powerpc/boot/uImage
--ifeq ($(CHOST),$(CBUILD))
-+ifeq ($(HOST_ARCH),$(ARCH))
- QEMU_MACHINE := -cpu host,accel=kvm -machine ppce500
- else
- QEMU_MACHINE := -machine ppce500
-@@ -200,10 +199,11 @@ else ifeq ($(ARCH),m68k)
- QEMU_ARCH := m68k
- KERNEL_ARCH := m68k
- KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
--ifeq ($(CHOST),$(CBUILD))
--QEMU_MACHINE := -cpu host,accel=kvm -machine q800
-+KERNEL_CMDLINE := $(shell sed -n 's/CONFIG_CMDLINE=\(.*\)/\1/p' arch/m68k.config)
-+ifeq ($(HOST_ARCH),$(ARCH))
-+QEMU_MACHINE := -cpu host,accel=kvm -machine q800 -smp 1 -append $(KERNEL_CMDLINE)
- else
--QEMU_MACHINE := -machine q800
-+QEMU_MACHINE := -machine q800 -smp 1 -append $(KERNEL_CMDLINE)
- endif
- else
- $(error I only build: x86_64, i686, arm, armeb, aarch64, aarch64_be, mips, mipsel, mips64, mips64el, powerpc64le, powerpc, m68k)
-@@ -238,14 +238,14 @@ $(BUILD_PATH)/init-cpio-spec.txt:
- 	echo "nod /dev/console 644 0 0 c 5 1" >> $@
- 	echo "dir /bin 755 0 0" >> $@
- 	echo "file /bin/iperf3 $(IPERF_PATH)/src/iperf3 755 0 0" >> $@
--	echo "file /bin/wg $(WIREGUARD_TOOLS_PATH)/src/tools/wg 755 0 0" >> $@
-+	echo "file /bin/wg $(WIREGUARD_TOOLS_PATH)/src/wg 755 0 0" >> $@
- 	echo "file /bin/bash $(BASH_PATH)/bash 755 0 0" >> $@
- 	echo "file /bin/ip $(IPROUTE2_PATH)/ip/ip 755 0 0" >> $@
- 	echo "file /bin/ss $(IPROUTE2_PATH)/misc/ss 755 0 0" >> $@
- 	echo "file /bin/ping $(IPUTILS_PATH)/ping 755 0 0" >> $@
- 	echo "file /bin/ncat $(NMAP_PATH)/ncat/ncat 755 0 0" >> $@
--	echo "file /bin/xtables-multi $(IPTABLES_PATH)/iptables/xtables-multi 755 0 0" >> $@
--	echo "slink /bin/iptables xtables-multi 777 0 0" >> $@
-+	echo "file /bin/xtables-legacy-multi $(IPTABLES_PATH)/iptables/xtables-legacy-multi 755 0 0" >> $@
-+	echo "slink /bin/iptables xtables-legacy-multi 777 0 0" >> $@
- 	echo "slink /bin/ping6 ping 777 0 0" >> $@
- 	echo "dir /lib 755 0 0" >> $@
- 	echo "file /lib/libc.so $(MUSL_PATH)/lib/libc.so 755 0 0" >> $@
-@@ -260,8 +260,8 @@ $(KERNEL_BUILD_PATH)/.config: kernel.con
- 	cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config $(KERNEL_BUILD_PATH)/minimal.config
- 	$(if $(findstring yes,$(DEBUG_KERNEL)),cp debug.config $(KERNEL_BUILD_PATH) && cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config debug.config,)
- 
--$(KERNEL_BZIMAGE): $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(MUSL_PATH)/lib/libc.so $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/tools/wg $(BUILD_PATH)/init ../netns.sh $(WIREGUARD_SOURCES)
--	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) CC="$(NOPIE_GCC)"
-+$(KERNEL_BZIMAGE): $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(MUSL_PATH)/lib/libc.so $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init ../netns.sh $(WIREGUARD_SOURCES)
-+	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE)
- 
- $(BUILD_PATH)/include/linux/.installed: | $(KERNEL_BUILD_PATH)/.config
- 	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) INSTALL_HDR_PATH=$(BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) headers_install
-@@ -280,7 +280,7 @@ $(BUILD_PATH)/include/.installed: $(MUSL
- 
- $(MUSL_CC): $(MUSL_PATH)/lib/libc.so
- 	sh $(MUSL_PATH)/tools/musl-gcc.specs.sh $(BUILD_PATH)/include $(MUSL_PATH)/lib /lib/ld-linux.so.1 > $(BUILD_PATH)/musl-gcc.specs
--	printf '#!/bin/sh\nexec "$(REAL_CC)" --specs="$(BUILD_PATH)/musl-gcc.specs" -fno-stack-protector -no-pie "$$@"\n' > $(BUILD_PATH)/musl-gcc
-+	printf '#!/bin/sh\nexec "$(REAL_CC)" --specs="$(BUILD_PATH)/musl-gcc.specs" "$$@"\n' > $(BUILD_PATH)/musl-gcc
- 	chmod +x $(BUILD_PATH)/musl-gcc
- 
- $(IPERF_PATH)/.installed: $(IPERF_TAR)
-@@ -291,7 +291,7 @@ $(IPERF_PATH)/.installed: $(IPERF_TAR)
- 	touch $@
- 
- $(IPERF_PATH)/src/iperf3: | $(IPERF_PATH)/.installed $(USERSPACE_DEPS)
--	cd $(IPERF_PATH) && CFLAGS="$(CFLAGS) -D_GNU_SOURCE" ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared
-+	cd $(IPERF_PATH) && CFLAGS="$(CFLAGS) -D_GNU_SOURCE" ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared --with-openssl=no
- 	$(MAKE) -C $(IPERF_PATH)
- 	$(STRIP) -s $@
- 
-@@ -308,8 +308,8 @@ $(WIREGUARD_TOOLS_PATH)/.installed: $(WI
- 	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
- 	touch $@
- 
--$(WIREGUARD_TOOLS_PATH)/src/tools/wg: | $(WIREGUARD_TOOLS_PATH)/.installed $(LIBMNL_PATH)/src/.libs/libmnl.a $(USERSPACE_DEPS)
--	LDFLAGS="$(LDFLAGS) -L$(LIBMNL_PATH)/src/.libs" $(MAKE) -C $(WIREGUARD_TOOLS_PATH)/src/tools LIBMNL_CFLAGS="-I$(LIBMNL_PATH)/include" LIBMNL_LDLIBS="-lmnl" wg
-+$(WIREGUARD_TOOLS_PATH)/src/wg: | $(WIREGUARD_TOOLS_PATH)/.installed $(LIBMNL_PATH)/src/.libs/libmnl.a $(USERSPACE_DEPS)
-+	LDFLAGS="$(LDFLAGS) -L$(LIBMNL_PATH)/src/.libs" $(MAKE) -C $(WIREGUARD_TOOLS_PATH)/src LIBMNL_CFLAGS="-I$(LIBMNL_PATH)/include" LIBMNL_LDLIBS="-lmnl" wg
- 	$(STRIP) -s $@
- 
- $(BUILD_PATH)/init: init.c | $(USERSPACE_DEPS)
-@@ -323,7 +323,8 @@ $(IPUTILS_PATH)/.installed: $(IPUTILS_TA
- 	touch $@
- 
- $(IPUTILS_PATH)/ping: | $(IPUTILS_PATH)/.installed $(USERSPACE_DEPS)
--	$(MAKE) -C $(IPUTILS_PATH) USE_CAP=no USE_IDN=no USE_NETTLE=no USE_CRYPTO=no ping
-+	sed -i /atexit/d $(IPUTILS_PATH)/ping.c
-+	cd $(IPUTILS_PATH) && $(CC) $(CFLAGS) -std=c99 -o $@ ping.c ping_common.c ping6_common.c iputils_common.c -D_GNU_SOURCE -D'IPUTILS_VERSION(f)=f' -lresolv $(LDFLAGS)
- 	$(STRIP) -s $@
- 
- $(BASH_PATH)/.installed: $(BASH_TAR)
-@@ -357,7 +358,7 @@ $(IPTABLES_PATH)/.installed: $(IPTABLES_
- 	sed -i -e "/nfnetlink=[01]/s:=[01]:=0:" -e "/nfconntrack=[01]/s:=[01]:=0:" $(IPTABLES_PATH)/configure
- 	touch $@
- 
--$(IPTABLES_PATH)/iptables/xtables-multi: | $(IPTABLES_PATH)/.installed $(LIBMNL_PATH)/src/.libs/libmnl.a $(USERSPACE_DEPS)
-+$(IPTABLES_PATH)/iptables/xtables-legacy-multi: | $(IPTABLES_PATH)/.installed $(LIBMNL_PATH)/src/.libs/libmnl.a $(USERSPACE_DEPS)
- 	cd $(IPTABLES_PATH) && PKG_CONFIG_LIBDIR="$(LIBMNL_PATH)" ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared --disable-nftables --disable-bpf-compiler --disable-nfsynproxy --disable-libipq --with-kernel=$(BUILD_PATH)/include
- 	$(MAKE) -C $(IPTABLES_PATH)
- 	$(STRIP) -s $@
-@@ -368,8 +369,9 @@ $(NMAP_PATH)/.installed: $(NMAP_TAR)
- 	touch $@
- 
- $(NMAP_PATH)/ncat/ncat: | $(NMAP_PATH)/.installed $(USERSPACE_DEPS)
--	cd $(NMAP_PATH) && ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared --without-ndiff --without-zenmap --without-nping --with-libpcap=included --with-libpcre=included --with-libdnet=included --without-liblua --with-liblinear=included --without-nmap-update --without-openssl --with-pcap=linux
--	$(MAKE) -C $(NMAP_PATH) build-ncat
-+	cd $(NMAP_PATH) && ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared --without-ndiff --without-zenmap --without-nping --with-libpcap=included --with-libpcre=included --with-libdnet=included --without-liblua --with-liblinear=included --without-nmap-update --without-openssl --with-pcap=linux --without-libssh
-+	$(MAKE) -C $(NMAP_PATH)/libpcap
-+	$(MAKE) -C $(NMAP_PATH)/ncat
- 	$(STRIP) -s $@
- 
- clean:
-@@ -379,7 +381,7 @@ distclean: clean
- 	rm -rf $(DISTFILES_PATH)
- 
- menuconfig: $(KERNEL_BUILD_PATH)/.config
--	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) CC="$(NOPIE_GCC)" menuconfig
-+	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) menuconfig
- 
- .PHONY: qemu build clean distclean menuconfig
- .DELETE_ON_ERROR:
---- a/tools/testing/selftests/wireguard/qemu/arch/m68k.config
-+++ b/tools/testing/selftests/wireguard/qemu/arch/m68k.config
-@@ -1,9 +1,9 @@
- CONFIG_MMU=y
-+CONFIG_M68KCLASSIC=y
- CONFIG_M68040=y
- CONFIG_MAC=y
- CONFIG_SERIAL_PMACZILOG=y
- CONFIG_SERIAL_PMACZILOG_TTYS=y
- CONFIG_SERIAL_PMACZILOG_CONSOLE=y
--CONFIG_CMDLINE_BOOL=y
- CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
- CONFIG_FRAME_WARN=1024
---- a/tools/testing/selftests/wireguard/qemu/init.c
-+++ b/tools/testing/selftests/wireguard/qemu/init.c
-@@ -21,6 +21,7 @@
- #include <sys/reboot.h>
- #include <sys/utsname.h>
- #include <sys/sendfile.h>
-+#include <sys/sysmacros.h>
- #include <linux/random.h>
- #include <linux/version.h>
- 
---- a/tools/testing/selftests/wireguard/qemu/kernel.config
-+++ b/tools/testing/selftests/wireguard/qemu/kernel.config
-@@ -39,6 +39,7 @@ CONFIG_PRINTK=y
- CONFIG_KALLSYMS=y
- CONFIG_BUG=y
- CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
-+CONFIG_JUMP_LABEL=y
- CONFIG_EMBEDDED=n
- CONFIG_BASE_FULL=y
- CONFIG_FUTEX=y
-@@ -55,6 +56,7 @@ CONFIG_NO_HZ_IDLE=y
- CONFIG_NO_HZ_FULL=n
- CONFIG_HZ_PERIODIC=n
- CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_COMPAT_32BIT_TIME=y
- CONFIG_ARCH_RANDOM=y
- CONFIG_FILE_LOCKING=y
- CONFIG_POSIX_TIMERS=y
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0079-wireguard-queueing-do-not-account-for-pfmemalloc-whe.patch b/target/linux/generic/backport-5.4/080-wireguard-0079-wireguard-queueing-do-not-account-for-pfmemalloc-whe.patch
deleted file mode 100644
index fb03b1b1a6..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0079-wireguard-queueing-do-not-account-for-pfmemalloc-whe.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Thu, 2 Jan 2020 17:47:50 +0100
-Subject: [PATCH] wireguard: queueing: do not account for pfmemalloc when
- clearing skb header
-
-commit 04d2ea92a18417619182cbb79063f154892b0150 upstream.
-
-Before 8b7008620b84 ("net: Don't copy pfmemalloc flag in __copy_skb_
-header()"), the pfmemalloc flag used to be between headers_start and
-headers_end, which is a region we clear when preparing the packet for
-encryption/decryption. This is a parameter we certainly want to
-preserve, which is why 8b7008620b84 moved it out of there. The code here
-was written in a world before 8b7008620b84, though, where we had to
-manually account for it. This commit brings things up to speed.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/queueing.h | 3 ---
- 1 file changed, 3 deletions(-)
-
---- a/drivers/net/wireguard/queueing.h
-+++ b/drivers/net/wireguard/queueing.h
-@@ -83,13 +83,10 @@ static inline __be16 wg_skb_examine_untr
- 
- static inline void wg_reset_packet(struct sk_buff *skb)
- {
--	const int pfmemalloc = skb->pfmemalloc;
--
- 	skb_scrub_packet(skb, true);
- 	memset(&skb->headers_start, 0,
- 	       offsetof(struct sk_buff, headers_end) -
- 		       offsetof(struct sk_buff, headers_start));
--	skb->pfmemalloc = pfmemalloc;
- 	skb->queue_mapping = 0;
- 	skb->nohdr = 0;
- 	skb->peeked = 0;
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0080-wireguard-socket-mark-skbs-as-not-on-list-when-recei.patch b/target/linux/generic/backport-5.4/080-wireguard-0080-wireguard-socket-mark-skbs-as-not-on-list-when-recei.patch
deleted file mode 100644
index 779491c8db..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0080-wireguard-socket-mark-skbs-as-not-on-list-when-recei.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Thu, 2 Jan 2020 17:47:51 +0100
-Subject: [PATCH] wireguard: socket: mark skbs as not on list when receiving
- via gro
-
-commit 736775d06bac60d7a353e405398b48b2bd8b1e54 upstream.
-
-Certain drivers will pass gro skbs to udp, at which point the udp driver
-simply iterates through them and passes them off to encap_rcv, which is
-where we pick up. At the moment, we're not attempting to coalesce these
-into bundles, but we also don't want to wind up having cascaded lists of
-skbs treated separately. The right behavior here, then, is to just mark
-each incoming one as not on a list. This can be seen in practice, for
-example, with Qualcomm's rmnet_perf driver.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Tested-by: Yaroslav Furman <yaro330@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/socket.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/wireguard/socket.c
-+++ b/drivers/net/wireguard/socket.c
-@@ -333,6 +333,7 @@ static int wg_receive(struct sock *sk, s
- 	wg = sk->sk_user_data;
- 	if (unlikely(!wg))
- 		goto err;
-+	skb_mark_not_on_list(skb);
- 	wg_packet_receive(wg, skb);
- 	return 0;
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0081-wireguard-allowedips-fix-use-after-free-in-root_remo.patch b/target/linux/generic/backport-5.4/080-wireguard-0081-wireguard-allowedips-fix-use-after-free-in-root_remo.patch
deleted file mode 100644
index e77ab5834a..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0081-wireguard-allowedips-fix-use-after-free-in-root_remo.patch
+++ /dev/null
@@ -1,164 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Eric Dumazet <edumazet@google.com>
-Date: Tue, 4 Feb 2020 22:17:25 +0100
-Subject: [PATCH] wireguard: allowedips: fix use-after-free in
- root_remove_peer_lists
-
-commit 9981159fc3b677b357f84e069a11de5a5ec8a2a8 upstream.
-
-In the unlikely case a new node could not be allocated, we need to
-remove @newnode from @peer->allowedips_list before freeing it.
-
-syzbot reported:
-
-BUG: KASAN: use-after-free in __list_del_entry_valid+0xdc/0xf5 lib/list_debug.c:54
-Read of size 8 at addr ffff88809881a538 by task syz-executor.4/30133
-
-CPU: 0 PID: 30133 Comm: syz-executor.4 Not tainted 5.5.0-syzkaller #0
-Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
-Call Trace:
- __dump_stack lib/dump_stack.c:77 [inline]
- dump_stack+0x197/0x210 lib/dump_stack.c:118
- print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
- __kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506
- kasan_report+0x12/0x20 mm/kasan/common.c:639
- __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
- __list_del_entry_valid+0xdc/0xf5 lib/list_debug.c:54
- __list_del_entry include/linux/list.h:132 [inline]
- list_del include/linux/list.h:146 [inline]
- root_remove_peer_lists+0x24f/0x4b0 drivers/net/wireguard/allowedips.c:65
- wg_allowedips_free+0x232/0x390 drivers/net/wireguard/allowedips.c:300
- wg_peer_remove_all+0xd5/0x620 drivers/net/wireguard/peer.c:187
- wg_set_device+0xd01/0x1350 drivers/net/wireguard/netlink.c:542
- genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
- genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
- genl_rcv_msg+0x67d/0xea0 net/netlink/genetlink.c:734
- netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
- genl_rcv+0x29/0x40 net/netlink/genetlink.c:745
- netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
- netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328
- netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
- sock_sendmsg_nosec net/socket.c:652 [inline]
- sock_sendmsg+0xd7/0x130 net/socket.c:672
- ____sys_sendmsg+0x753/0x880 net/socket.c:2343
- ___sys_sendmsg+0x100/0x170 net/socket.c:2397
- __sys_sendmsg+0x105/0x1d0 net/socket.c:2430
- __do_sys_sendmsg net/socket.c:2439 [inline]
- __se_sys_sendmsg net/socket.c:2437 [inline]
- __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
- do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
- entry_SYSCALL_64_after_hwframe+0x49/0xbe
-RIP: 0033:0x45b399
-Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
-RSP: 002b:00007f99a9bcdc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
-RAX: ffffffffffffffda RBX: 00007f99a9bce6d4 RCX: 000000000045b399
-RDX: 0000000000000000 RSI: 0000000020001340 RDI: 0000000000000003
-RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
-R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000004
-R13: 00000000000009ba R14: 00000000004cb2b8 R15: 0000000000000009
-
-Allocated by task 30103:
- save_stack+0x23/0x90 mm/kasan/common.c:72
- set_track mm/kasan/common.c:80 [inline]
- __kasan_kmalloc mm/kasan/common.c:513 [inline]
- __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
- kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527
- kmem_cache_alloc_trace+0x158/0x790 mm/slab.c:3551
- kmalloc include/linux/slab.h:556 [inline]
- kzalloc include/linux/slab.h:670 [inline]
- add+0x70a/0x1970 drivers/net/wireguard/allowedips.c:236
- wg_allowedips_insert_v4+0xf6/0x160 drivers/net/wireguard/allowedips.c:320
- set_allowedip drivers/net/wireguard/netlink.c:343 [inline]
- set_peer+0xfb9/0x1150 drivers/net/wireguard/netlink.c:468
- wg_set_device+0xbd4/0x1350 drivers/net/wireguard/netlink.c:591
- genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
- genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
- genl_rcv_msg+0x67d/0xea0 net/netlink/genetlink.c:734
- netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
- genl_rcv+0x29/0x40 net/netlink/genetlink.c:745
- netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
- netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328
- netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
- sock_sendmsg_nosec net/socket.c:652 [inline]
- sock_sendmsg+0xd7/0x130 net/socket.c:672
- ____sys_sendmsg+0x753/0x880 net/socket.c:2343
- ___sys_sendmsg+0x100/0x170 net/socket.c:2397
- __sys_sendmsg+0x105/0x1d0 net/socket.c:2430
- __do_sys_sendmsg net/socket.c:2439 [inline]
- __se_sys_sendmsg net/socket.c:2437 [inline]
- __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
- do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
- entry_SYSCALL_64_after_hwframe+0x49/0xbe
-
-Freed by task 30103:
- save_stack+0x23/0x90 mm/kasan/common.c:72
- set_track mm/kasan/common.c:80 [inline]
- kasan_set_free_info mm/kasan/common.c:335 [inline]
- __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
- kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
- __cache_free mm/slab.c:3426 [inline]
- kfree+0x10a/0x2c0 mm/slab.c:3757
- add+0x12d2/0x1970 drivers/net/wireguard/allowedips.c:266
- wg_allowedips_insert_v4+0xf6/0x160 drivers/net/wireguard/allowedips.c:320
- set_allowedip drivers/net/wireguard/netlink.c:343 [inline]
- set_peer+0xfb9/0x1150 drivers/net/wireguard/netlink.c:468
- wg_set_device+0xbd4/0x1350 drivers/net/wireguard/netlink.c:591
- genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
- genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
- genl_rcv_msg+0x67d/0xea0 net/netlink/genetlink.c:734
- netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
- genl_rcv+0x29/0x40 net/netlink/genetlink.c:745
- netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
- netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328
- netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
- sock_sendmsg_nosec net/socket.c:652 [inline]
- sock_sendmsg+0xd7/0x130 net/socket.c:672
- ____sys_sendmsg+0x753/0x880 net/socket.c:2343
- ___sys_sendmsg+0x100/0x170 net/socket.c:2397
- __sys_sendmsg+0x105/0x1d0 net/socket.c:2430
- __do_sys_sendmsg net/socket.c:2439 [inline]
- __se_sys_sendmsg net/socket.c:2437 [inline]
- __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
- do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
- entry_SYSCALL_64_after_hwframe+0x49/0xbe
-
-The buggy address belongs to the object at ffff88809881a500
- which belongs to the cache kmalloc-64 of size 64
-The buggy address is located 56 bytes inside of
- 64-byte region [ffff88809881a500, ffff88809881a540)
-The buggy address belongs to the page:
-page:ffffea0002620680 refcount:1 mapcount:0 mapping:ffff8880aa400380 index:0x0
-raw: 00fffe0000000200 ffffea000250b748 ffffea000254bac8 ffff8880aa400380
-raw: 0000000000000000 ffff88809881a000 0000000100000020 0000000000000000
-page dumped because: kasan: bad access detected
-
-Memory state around the buggy address:
- ffff88809881a400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
- ffff88809881a480: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
->ffff88809881a500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
-                                        ^
- ffff88809881a580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
- ffff88809881a600: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
-
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Signed-off-by: Eric Dumazet <edumazet@google.com>
-Reported-by: syzbot <syzkaller@googlegroups.com>
-Cc: Jason A. Donenfeld <Jason@zx2c4.com>
-Cc: wireguard@lists.zx2c4.com
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/allowedips.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/wireguard/allowedips.c
-+++ b/drivers/net/wireguard/allowedips.c
-@@ -263,6 +263,7 @@ static int add(struct allowedips_node __
- 	} else {
- 		node = kzalloc(sizeof(*node), GFP_KERNEL);
- 		if (unlikely(!node)) {
-+			list_del(&newnode->peer_list);
- 			kfree(newnode);
- 			return -ENOMEM;
- 		}
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0082-wireguard-noise-reject-peers-with-low-order-public-k.patch b/target/linux/generic/backport-5.4/080-wireguard-0082-wireguard-noise-reject-peers-with-low-order-public-k.patch
deleted file mode 100644
index 55bb276118..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0082-wireguard-noise-reject-peers-with-low-order-public-k.patch
+++ /dev/null
@@ -1,233 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Tue, 4 Feb 2020 22:17:26 +0100
-Subject: [PATCH] wireguard: noise: reject peers with low order public keys
-
-commit ec31c2676a10e064878927b243fada8c2fb0c03c upstream.
-
-Our static-static calculation returns a failure if the public key is of
-low order. We check for this when peers are added, and don't allow them
-to be added if they're low order, except in the case where we haven't
-yet been given a private key. In that case, we would defer the removal
-of the peer until we're given a private key, since at that point we're
-doing new static-static calculations which incur failures we can act on.
-This meant, however, that we wound up removing peers rather late in the
-configuration flow.
-
-Syzkaller points out that peer_remove calls flush_workqueue, which in
-turn might then wait for sending a handshake initiation to complete.
-Since handshake initiation needs the static identity lock, holding the
-static identity lock while calling peer_remove can result in a rare
-deadlock. We have precisely this case in this situation of late-stage
-peer removal based on an invalid public key. We can't drop the lock when
-removing, because then incoming handshakes might interact with a bogus
-static-static calculation.
-
-While the band-aid patch for this would involve breaking up the peer
-removal into two steps like wg_peer_remove_all does, in order to solve
-the locking issue, there's actually a much more elegant way of fixing
-this:
-
-If the static-static calculation succeeds with one private key, it
-*must* succeed with all others, because all 32-byte strings map to valid
-private keys, thanks to clamping. That means we can get rid of this
-silly dance and locking headaches of removing peers late in the
-configuration flow, and instead just reject them early on, regardless of
-whether the device has yet been assigned a private key. For the case
-where the device doesn't yet have a private key, we safely use zeros
-just for the purposes of checking for low order points by way of
-checking the output of the calculation.
-
-The following PoC will trigger the deadlock:
-
-ip link add wg0 type wireguard
-ip addr add 10.0.0.1/24 dev wg0
-ip link set wg0 up
-ping -f 10.0.0.2 &
-while true; do
-        wg set wg0 private-key /dev/null peer AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= allowed-ips 10.0.0.0/24 endpoint 10.0.0.3:1234
-        wg set wg0 private-key <(echo AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=)
-done
-
-[    0.949105] ======================================================
-[    0.949550] WARNING: possible circular locking dependency detected
-[    0.950143] 5.5.0-debug+ #18 Not tainted
-[    0.950431] ------------------------------------------------------
-[    0.950959] wg/89 is trying to acquire lock:
-[    0.951252] ffff8880333e2128 ((wq_completion)wg-kex-wg0){+.+.}, at: flush_workqueue+0xe3/0x12f0
-[    0.951865]
-[    0.951865] but task is already holding lock:
-[    0.952280] ffff888032819bc0 (&wg->static_identity.lock){++++}, at: wg_set_device+0x95d/0xcc0
-[    0.953011]
-[    0.953011] which lock already depends on the new lock.
-[    0.953011]
-[    0.953651]
-[    0.953651] the existing dependency chain (in reverse order) is:
-[    0.954292]
-[    0.954292] -> #2 (&wg->static_identity.lock){++++}:
-[    0.954804]        lock_acquire+0x127/0x350
-[    0.955133]        down_read+0x83/0x410
-[    0.955428]        wg_noise_handshake_create_initiation+0x97/0x700
-[    0.955885]        wg_packet_send_handshake_initiation+0x13a/0x280
-[    0.956401]        wg_packet_handshake_send_worker+0x10/0x20
-[    0.956841]        process_one_work+0x806/0x1500
-[    0.957167]        worker_thread+0x8c/0xcb0
-[    0.957549]        kthread+0x2ee/0x3b0
-[    0.957792]        ret_from_fork+0x24/0x30
-[    0.958234]
-[    0.958234] -> #1 ((work_completion)(&peer->transmit_handshake_work)){+.+.}:
-[    0.958808]        lock_acquire+0x127/0x350
-[    0.959075]        process_one_work+0x7ab/0x1500
-[    0.959369]        worker_thread+0x8c/0xcb0
-[    0.959639]        kthread+0x2ee/0x3b0
-[    0.959896]        ret_from_fork+0x24/0x30
-[    0.960346]
-[    0.960346] -> #0 ((wq_completion)wg-kex-wg0){+.+.}:
-[    0.960945]        check_prev_add+0x167/0x1e20
-[    0.961351]        __lock_acquire+0x2012/0x3170
-[    0.961725]        lock_acquire+0x127/0x350
-[    0.961990]        flush_workqueue+0x106/0x12f0
-[    0.962280]        peer_remove_after_dead+0x160/0x220
-[    0.962600]        wg_set_device+0xa24/0xcc0
-[    0.962994]        genl_rcv_msg+0x52f/0xe90
-[    0.963298]        netlink_rcv_skb+0x111/0x320
-[    0.963618]        genl_rcv+0x1f/0x30
-[    0.963853]        netlink_unicast+0x3f6/0x610
-[    0.964245]        netlink_sendmsg+0x700/0xb80
-[    0.964586]        __sys_sendto+0x1dd/0x2c0
-[    0.964854]        __x64_sys_sendto+0xd8/0x1b0
-[    0.965141]        do_syscall_64+0x90/0xd9a
-[    0.965408]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
-[    0.965769]
-[    0.965769] other info that might help us debug this:
-[    0.965769]
-[    0.966337] Chain exists of:
-[    0.966337]   (wq_completion)wg-kex-wg0 --> (work_completion)(&peer->transmit_handshake_work) --> &wg->static_identity.lock
-[    0.966337]
-[    0.967417]  Possible unsafe locking scenario:
-[    0.967417]
-[    0.967836]        CPU0                    CPU1
-[    0.968155]        ----                    ----
-[    0.968497]   lock(&wg->static_identity.lock);
-[    0.968779]                                lock((work_completion)(&peer->transmit_handshake_work));
-[    0.969345]                                lock(&wg->static_identity.lock);
-[    0.969809]   lock((wq_completion)wg-kex-wg0);
-[    0.970146]
-[    0.970146]  *** DEADLOCK ***
-[    0.970146]
-[    0.970531] 5 locks held by wg/89:
-[    0.970908]  #0: ffffffff827433c8 (cb_lock){++++}, at: genl_rcv+0x10/0x30
-[    0.971400]  #1: ffffffff82743480 (genl_mutex){+.+.}, at: genl_rcv_msg+0x642/0xe90
-[    0.971924]  #2: ffffffff827160c0 (rtnl_mutex){+.+.}, at: wg_set_device+0x9f/0xcc0
-[    0.972488]  #3: ffff888032819de0 (&wg->device_update_lock){+.+.}, at: wg_set_device+0xb0/0xcc0
-[    0.973095]  #4: ffff888032819bc0 (&wg->static_identity.lock){++++}, at: wg_set_device+0x95d/0xcc0
-[    0.973653]
-[    0.973653] stack backtrace:
-[    0.973932] CPU: 1 PID: 89 Comm: wg Not tainted 5.5.0-debug+ #18
-[    0.974476] Call Trace:
-[    0.974638]  dump_stack+0x97/0xe0
-[    0.974869]  check_noncircular+0x312/0x3e0
-[    0.975132]  ? print_circular_bug+0x1f0/0x1f0
-[    0.975410]  ? __kernel_text_address+0x9/0x30
-[    0.975727]  ? unwind_get_return_address+0x51/0x90
-[    0.976024]  check_prev_add+0x167/0x1e20
-[    0.976367]  ? graph_lock+0x70/0x160
-[    0.976682]  __lock_acquire+0x2012/0x3170
-[    0.976998]  ? register_lock_class+0x1140/0x1140
-[    0.977323]  lock_acquire+0x127/0x350
-[    0.977627]  ? flush_workqueue+0xe3/0x12f0
-[    0.977890]  flush_workqueue+0x106/0x12f0
-[    0.978147]  ? flush_workqueue+0xe3/0x12f0
-[    0.978410]  ? find_held_lock+0x2c/0x110
-[    0.978662]  ? lock_downgrade+0x6e0/0x6e0
-[    0.978919]  ? queue_rcu_work+0x60/0x60
-[    0.979166]  ? netif_napi_del+0x151/0x3b0
-[    0.979501]  ? peer_remove_after_dead+0x160/0x220
-[    0.979871]  peer_remove_after_dead+0x160/0x220
-[    0.980232]  wg_set_device+0xa24/0xcc0
-[    0.980516]  ? deref_stack_reg+0x8e/0xc0
-[    0.980801]  ? set_peer+0xe10/0xe10
-[    0.981040]  ? __ww_mutex_check_waiters+0x150/0x150
-[    0.981430]  ? __nla_validate_parse+0x163/0x270
-[    0.981719]  ? genl_family_rcv_msg_attrs_parse+0x13f/0x310
-[    0.982078]  genl_rcv_msg+0x52f/0xe90
-[    0.982348]  ? genl_family_rcv_msg_attrs_parse+0x310/0x310
-[    0.982690]  ? register_lock_class+0x1140/0x1140
-[    0.983049]  netlink_rcv_skb+0x111/0x320
-[    0.983298]  ? genl_family_rcv_msg_attrs_parse+0x310/0x310
-[    0.983645]  ? netlink_ack+0x880/0x880
-[    0.983888]  genl_rcv+0x1f/0x30
-[    0.984168]  netlink_unicast+0x3f6/0x610
-[    0.984443]  ? netlink_detachskb+0x60/0x60
-[    0.984729]  ? find_held_lock+0x2c/0x110
-[    0.984976]  netlink_sendmsg+0x700/0xb80
-[    0.985220]  ? netlink_broadcast_filtered+0xa60/0xa60
-[    0.985533]  __sys_sendto+0x1dd/0x2c0
-[    0.985763]  ? __x64_sys_getpeername+0xb0/0xb0
-[    0.986039]  ? sockfd_lookup_light+0x17/0x160
-[    0.986397]  ? __sys_recvmsg+0x8c/0xf0
-[    0.986711]  ? __sys_recvmsg_sock+0xd0/0xd0
-[    0.987018]  __x64_sys_sendto+0xd8/0x1b0
-[    0.987283]  ? lockdep_hardirqs_on+0x39b/0x5a0
-[    0.987666]  do_syscall_64+0x90/0xd9a
-[    0.987903]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
-[    0.988223] RIP: 0033:0x7fe77c12003e
-[    0.988508] Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 4
-[    0.989666] RSP: 002b:00007fffada2ed58 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
-[    0.990137] RAX: ffffffffffffffda RBX: 00007fe77c159d48 RCX: 00007fe77c12003e
-[    0.990583] RDX: 0000000000000040 RSI: 000055fd1d38e020 RDI: 0000000000000004
-[    0.991091] RBP: 000055fd1d38e020 R08: 000055fd1cb63358 R09: 000000000000000c
-[    0.991568] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000002c
-[    0.992014] R13: 0000000000000004 R14: 000055fd1d38e020 R15: 0000000000000001
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Reported-by: syzbot <syzkaller@googlegroups.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/netlink.c |  6 ++----
- drivers/net/wireguard/noise.c   | 10 +++++++---
- 2 files changed, 9 insertions(+), 7 deletions(-)
-
---- a/drivers/net/wireguard/netlink.c
-+++ b/drivers/net/wireguard/netlink.c
-@@ -575,10 +575,8 @@ static int wg_set_device(struct sk_buff
- 							 private_key);
- 		list_for_each_entry_safe(peer, temp, &wg->peer_list,
- 					 peer_list) {
--			if (wg_noise_precompute_static_static(peer))
--				wg_noise_expire_current_peer_keypairs(peer);
--			else
--				wg_peer_remove(peer);
-+			BUG_ON(!wg_noise_precompute_static_static(peer));
-+			wg_noise_expire_current_peer_keypairs(peer);
- 		}
- 		wg_cookie_checker_precompute_device_keys(&wg->cookie_checker);
- 		up_write(&wg->static_identity.lock);
---- a/drivers/net/wireguard/noise.c
-+++ b/drivers/net/wireguard/noise.c
-@@ -46,17 +46,21 @@ void __init wg_noise_init(void)
- /* Must hold peer->handshake.static_identity->lock */
- bool wg_noise_precompute_static_static(struct wg_peer *peer)
- {
--	bool ret = true;
-+	bool ret;
- 
- 	down_write(&peer->handshake.lock);
--	if (peer->handshake.static_identity->has_identity)
-+	if (peer->handshake.static_identity->has_identity) {
- 		ret = curve25519(
- 			peer->handshake.precomputed_static_static,
- 			peer->handshake.static_identity->static_private,
- 			peer->handshake.remote_static);
--	else
-+	} else {
-+		u8 empty[NOISE_PUBLIC_KEY_LEN] = { 0 };
-+
-+		ret = curve25519(empty, empty, peer->handshake.remote_static);
- 		memset(peer->handshake.precomputed_static_static, 0,
- 		       NOISE_PUBLIC_KEY_LEN);
-+	}
- 	up_write(&peer->handshake.lock);
- 	return ret;
- }
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0083-wireguard-selftests-ensure-non-addition-of-peers-wit.patch b/target/linux/generic/backport-5.4/080-wireguard-0083-wireguard-selftests-ensure-non-addition-of-peers-wit.patch
deleted file mode 100644
index 86877a6590..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0083-wireguard-selftests-ensure-non-addition-of-peers-wit.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Tue, 4 Feb 2020 22:17:27 +0100
-Subject: [PATCH] wireguard: selftests: ensure non-addition of peers with
- failed precomputation
-
-commit f9398acba6a4ae9cb98bfe4d56414d376eff8d57 upstream.
-
-Ensure that peers with low order points are ignored, both in the case
-where we already have a device private key and in the case where we do
-not. This adds points that naturally give a zero output.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- tools/testing/selftests/wireguard/netns.sh | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/tools/testing/selftests/wireguard/netns.sh
-+++ b/tools/testing/selftests/wireguard/netns.sh
-@@ -516,6 +516,12 @@ n0 wg set wg0 peer "$pub2" allowed-ips 0
- n0 wg set wg0 peer "$pub2" allowed-ips 0.0.0.0/0
- n0 wg set wg0 peer "$pub2" allowed-ips ::/0,1700::/111,5000::/4,e000::/37,9000::/75
- n0 wg set wg0 peer "$pub2" allowed-ips ::/0
-+n0 wg set wg0 peer "$pub2" remove
-+low_order_points=( AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= AQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= 4Ot6fDtBuK4WVuP68Z/EatoJjeucMrH9hmIFFl9JuAA= X5yVvKNQjCSx0LFVnIPvWwREXMRYHI6G2CJO3dCfEVc= 7P///////////////////////////////////////38= 7f///////////////////////////////////////38= 7v///////////////////////////////////////38= )
-+n0 wg set wg0 private-key /dev/null ${low_order_points[@]/#/peer }
-+[[ -z $(n0 wg show wg0 peers) ]]
-+n0 wg set wg0 private-key <(echo "$key1") ${low_order_points[@]/#/peer }
-+[[ -z $(n0 wg show wg0 peers) ]]
- ip0 link del wg0
- 
- declare -A objects
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0084-wireguard-selftests-tie-socket-waiting-to-target-pid.patch b/target/linux/generic/backport-5.4/080-wireguard-0084-wireguard-selftests-tie-socket-waiting-to-target-pid.patch
deleted file mode 100644
index 4530f0f49a..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0084-wireguard-selftests-tie-socket-waiting-to-target-pid.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Tue, 4 Feb 2020 22:17:29 +0100
-Subject: [PATCH] wireguard: selftests: tie socket waiting to target pid
-
-commit 88f404a9b1d75388225b1c67b6dd327cb2182777 upstream.
-
-Without this, we wind up proceeding too early sometimes when the
-previous process has just used the same listening port. So, we tie the
-listening socket query to the specific pid we're interested in.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- tools/testing/selftests/wireguard/netns.sh | 17 ++++++++---------
- 1 file changed, 8 insertions(+), 9 deletions(-)
-
---- a/tools/testing/selftests/wireguard/netns.sh
-+++ b/tools/testing/selftests/wireguard/netns.sh
-@@ -38,9 +38,8 @@ ip0() { pretty 0 "ip $*"; ip -n $netns0
- ip1() { pretty 1 "ip $*"; ip -n $netns1 "$@"; }
- ip2() { pretty 2 "ip $*"; ip -n $netns2 "$@"; }
- sleep() { read -t "$1" -N 1 || true; }
--waitiperf() { pretty "${1//*-}" "wait for iperf:5201"; while [[ $(ss -N "$1" -tlp 'sport = 5201') != *iperf3* ]]; do sleep 0.1; done; }
--waitncatudp() { pretty "${1//*-}" "wait for udp:1111"; while [[ $(ss -N "$1" -ulp 'sport = 1111') != *ncat* ]]; do sleep 0.1; done; }
--waitncattcp() { pretty "${1//*-}" "wait for tcp:1111"; while [[ $(ss -N "$1" -tlp 'sport = 1111') != *ncat* ]]; do sleep 0.1; done; }
-+waitiperf() { pretty "${1//*-}" "wait for iperf:5201 pid $2"; while [[ $(ss -N "$1" -tlpH 'sport = 5201') != *\"iperf3\",pid=$2,fd=* ]]; do sleep 0.1; done; }
-+waitncatudp() { pretty "${1//*-}" "wait for udp:1111 pid $2"; while [[ $(ss -N "$1" -ulpH 'sport = 1111') != *\"ncat\",pid=$2,fd=* ]]; do sleep 0.1; done; }
- waitiface() { pretty "${1//*-}" "wait for $2 to come up"; ip netns exec "$1" bash -c "while [[ \$(< \"/sys/class/net/$2/operstate\") != up ]]; do read -t .1 -N 0 || true; done;"; }
- 
- cleanup() {
-@@ -119,22 +118,22 @@ tests() {
- 
- 	# TCP over IPv4
- 	n2 iperf3 -s -1 -B 192.168.241.2 &
--	waitiperf $netns2
-+	waitiperf $netns2 $!
- 	n1 iperf3 -Z -t 3 -c 192.168.241.2
- 
- 	# TCP over IPv6
- 	n1 iperf3 -s -1 -B fd00::1 &
--	waitiperf $netns1
-+	waitiperf $netns1 $!
- 	n2 iperf3 -Z -t 3 -c fd00::1
- 
- 	# UDP over IPv4
- 	n1 iperf3 -s -1 -B 192.168.241.1 &
--	waitiperf $netns1
-+	waitiperf $netns1 $!
- 	n2 iperf3 -Z -t 3 -b 0 -u -c 192.168.241.1
- 
- 	# UDP over IPv6
- 	n2 iperf3 -s -1 -B fd00::2 &
--	waitiperf $netns2
-+	waitiperf $netns2 $!
- 	n1 iperf3 -Z -t 3 -b 0 -u -c fd00::2
- }
- 
-@@ -207,7 +206,7 @@ n1 ping -W 1 -c 1 192.168.241.2
- n1 wg set wg0 peer "$pub2" allowed-ips 192.168.241.0/24
- exec 4< <(n1 ncat -l -u -p 1111)
- ncat_pid=$!
--waitncatudp $netns1
-+waitncatudp $netns1 $ncat_pid
- n2 ncat -u 192.168.241.1 1111 <<<"X"
- read -r -N 1 -t 1 out <&4 && [[ $out == "X" ]]
- kill $ncat_pid
-@@ -216,7 +215,7 @@ n1 wg set wg0 peer "$more_specific_key"
- n2 wg set wg0 listen-port 9997
- exec 4< <(n1 ncat -l -u -p 1111)
- ncat_pid=$!
--waitncatudp $netns1
-+waitncatudp $netns1 $ncat_pid
- n2 ncat -u 192.168.241.1 1111 <<<"X"
- ! read -r -N 1 -t 1 out <&4 || false
- kill $ncat_pid
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0085-wireguard-device-use-icmp_ndo_send-helper.patch b/target/linux/generic/backport-5.4/080-wireguard-0085-wireguard-device-use-icmp_ndo_send-helper.patch
deleted file mode 100644
index 321db189e1..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0085-wireguard-device-use-icmp_ndo_send-helper.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Tue, 11 Feb 2020 20:47:08 +0100
-Subject: [PATCH] wireguard: device: use icmp_ndo_send helper
-
-commit a12d7f3cbdc72c7625881c8dc2660fc2c979fdf2 upstream.
-
-Because wireguard is calling icmp from network device context, it should
-use the ndo helper so that the rate limiting applies correctly.  This
-commit adds a small test to the wireguard test suite to ensure that the
-new functions continue doing the right thing in the context of
-wireguard. It does this by setting up a condition that will definately
-evoke an icmp error message from the driver, but along a nat'd path.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/device.c             |  4 ++--
- tools/testing/selftests/wireguard/netns.sh | 11 +++++++++++
- 2 files changed, 13 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireguard/device.c
-+++ b/drivers/net/wireguard/device.c
-@@ -203,9 +203,9 @@ err_peer:
- err:
- 	++dev->stats.tx_errors;
- 	if (skb->protocol == htons(ETH_P_IP))
--		icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0);
-+		icmp_ndo_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0);
- 	else if (skb->protocol == htons(ETH_P_IPV6))
--		icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0);
-+		icmpv6_ndo_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0);
- 	kfree_skb(skb);
- 	return ret;
- }
---- a/tools/testing/selftests/wireguard/netns.sh
-+++ b/tools/testing/selftests/wireguard/netns.sh
-@@ -24,6 +24,7 @@
- set -e
- 
- exec 3>&1
-+export LANG=C
- export WG_HIDE_KEYS=never
- netns0="wg-test-$$-0"
- netns1="wg-test-$$-1"
-@@ -297,7 +298,17 @@ ip1 -4 rule add table main suppress_pref
- n1 ping -W 1 -c 100 -f 192.168.99.7
- n1 ping -W 1 -c 100 -f abab::1111
- 
-+# Have ns2 NAT into wg0 packets from ns0, but return an icmp error along the right route.
-+n2 iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -d 192.168.241.0/24 -j SNAT --to 192.168.241.2
-+n0 iptables -t filter -A INPUT \! -s 10.0.0.0/24 -i vethrs -j DROP # Manual rpfilter just to be explicit.
-+n2 bash -c 'printf 1 > /proc/sys/net/ipv4/ip_forward'
-+ip0 -4 route add 192.168.241.1 via 10.0.0.100
-+n2 wg set wg0 peer "$pub1" remove
-+[[ $(! n0 ping -W 1 -c 1 192.168.241.1 || false) == *"From 10.0.0.100 icmp_seq=1 Destination Host Unreachable"* ]]
-+
- n0 iptables -t nat -F
-+n0 iptables -t filter -F
-+n2 iptables -t nat -F
- ip0 link del vethrc
- ip0 link del vethrs
- ip1 link del wg0
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0086-wireguard-selftests-reduce-complexity-and-fix-make-r.patch b/target/linux/generic/backport-5.4/080-wireguard-0086-wireguard-selftests-reduce-complexity-and-fix-make-r.patch
deleted file mode 100644
index ac292a8682..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0086-wireguard-selftests-reduce-complexity-and-fix-make-r.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 14 Feb 2020 23:57:20 +0100
-Subject: [PATCH] wireguard: selftests: reduce complexity and fix make races
-
-commit 04ddf1208f03e1dbc39a4619c40eba640051b950 upstream.
-
-This gives us fewer dependencies and shortens build time, fixes up some
-hash checking race conditions, and also fixes missing directory creation
-that caused issues on massively parallel builds.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- .../testing/selftests/wireguard/qemu/Makefile | 38 +++++++------------
- 1 file changed, 14 insertions(+), 24 deletions(-)
-
---- a/tools/testing/selftests/wireguard/qemu/Makefile
-+++ b/tools/testing/selftests/wireguard/qemu/Makefile
-@@ -38,19 +38,17 @@ endef
- define file_download =
- $(DISTFILES_PATH)/$(1):
- 	mkdir -p $(DISTFILES_PATH)
--	flock -x $$@.lock -c '[ -f $$@ ] && exit 0; wget -O $$@.tmp $(MIRROR)$(1) || wget -O $$@.tmp $(2)$(1) || rm -f $$@.tmp'
--	if echo "$(3)  $$@.tmp" | sha256sum -c -; then mv $$@.tmp $$@; else rm -f $$@.tmp; exit 71; fi
-+	flock -x $$@.lock -c '[ -f $$@ ] && exit 0; wget -O $$@.tmp $(MIRROR)$(1) || wget -O $$@.tmp $(2)$(1) || rm -f $$@.tmp; [ -f $$@.tmp ] || exit 1; if echo "$(3)  $$@.tmp" | sha256sum -c -; then mv $$@.tmp $$@; else rm -f $$@.tmp; exit 71; fi'
- endef
- 
- $(eval $(call tar_download,MUSL,musl,1.1.24,.tar.gz,https://www.musl-libc.org/releases/,1370c9a812b2cf2a7d92802510cca0058cc37e66a7bedd70051f0a34015022a3))
--$(eval $(call tar_download,LIBMNL,libmnl,1.0.4,.tar.bz2,https://www.netfilter.org/projects/libmnl/files/,171f89699f286a5854b72b91d06e8f8e3683064c5901fb09d954a9ab6f551f81))
- $(eval $(call tar_download,IPERF,iperf,3.7,.tar.gz,https://downloads.es.net/pub/iperf/,d846040224317caf2f75c843d309a950a7db23f9b44b94688ccbe557d6d1710c))
- $(eval $(call tar_download,BASH,bash,5.0,.tar.gz,https://ftp.gnu.org/gnu/bash/,b4a80f2ac66170b2913efbfb9f2594f1f76c7b1afd11f799e22035d63077fb4d))
- $(eval $(call tar_download,IPROUTE2,iproute2,5.4.0,.tar.xz,https://www.kernel.org/pub/linux/utils/net/iproute2/,fe97aa60a0d4c5ac830be18937e18dc3400ca713a33a89ad896ff1e3d46086ae))
- $(eval $(call tar_download,IPTABLES,iptables,1.8.4,.tar.bz2,https://www.netfilter.org/projects/iptables/files/,993a3a5490a544c2cbf2ef15cf7e7ed21af1845baf228318d5c36ef8827e157c))
- $(eval $(call tar_download,NMAP,nmap,7.80,.tar.bz2,https://nmap.org/dist/,fcfa5a0e42099e12e4bf7a68ebe6fde05553383a682e816a7ec9256ab4773faa))
- $(eval $(call tar_download,IPUTILS,iputils,s20190709,.tar.gz,https://github.com/iputils/iputils/archive/s20190709.tar.gz/#,a15720dd741d7538dd2645f9f516d193636ae4300ff7dbc8bfca757bf166490a))
--$(eval $(call tar_download,WIREGUARD_TOOLS,wireguard-tools,1.0.20191226,.tar.xz,https://git.zx2c4.com/wireguard-tools/snapshot/,aa8af0fdc9872d369d8c890a84dbc2a2466b55795dccd5b47721b2d97644b04f))
-+$(eval $(call tar_download,WIREGUARD_TOOLS,wireguard-tools,1.0.20200206,.tar.xz,https://git.zx2c4.com/wireguard-tools/snapshot/,f5207248c6a3c3e3bfc9ab30b91c1897b00802ed861e1f9faaed873366078c64))
- 
- KERNEL_BUILD_PATH := $(BUILD_PATH)/kernel$(if $(findstring yes,$(DEBUG_KERNEL)),-debug)
- rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d))
-@@ -295,21 +293,13 @@ $(IPERF_PATH)/src/iperf3: | $(IPERF_PATH
- 	$(MAKE) -C $(IPERF_PATH)
- 	$(STRIP) -s $@
- 
--$(LIBMNL_PATH)/.installed: $(LIBMNL_TAR)
--	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
--	touch $@
--
--$(LIBMNL_PATH)/src/.libs/libmnl.a: | $(LIBMNL_PATH)/.installed $(USERSPACE_DEPS)
--	cd $(LIBMNL_PATH) && ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared
--	$(MAKE) -C $(LIBMNL_PATH)
--	sed -i 's:prefix=.*:prefix=$(LIBMNL_PATH):' $(LIBMNL_PATH)/libmnl.pc
--
- $(WIREGUARD_TOOLS_PATH)/.installed: $(WIREGUARD_TOOLS_TAR)
-+	mkdir -p $(BUILD_PATH)
- 	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
- 	touch $@
- 
--$(WIREGUARD_TOOLS_PATH)/src/wg: | $(WIREGUARD_TOOLS_PATH)/.installed $(LIBMNL_PATH)/src/.libs/libmnl.a $(USERSPACE_DEPS)
--	LDFLAGS="$(LDFLAGS) -L$(LIBMNL_PATH)/src/.libs" $(MAKE) -C $(WIREGUARD_TOOLS_PATH)/src LIBMNL_CFLAGS="-I$(LIBMNL_PATH)/include" LIBMNL_LDLIBS="-lmnl" wg
-+$(WIREGUARD_TOOLS_PATH)/src/wg: | $(WIREGUARD_TOOLS_PATH)/.installed $(USERSPACE_DEPS)
-+	$(MAKE) -C $(WIREGUARD_TOOLS_PATH)/src wg
- 	$(STRIP) -s $@
- 
- $(BUILD_PATH)/init: init.c | $(USERSPACE_DEPS)
-@@ -340,17 +330,17 @@ $(BASH_PATH)/bash: | $(BASH_PATH)/.insta
- $(IPROUTE2_PATH)/.installed: $(IPROUTE2_TAR)
- 	mkdir -p $(BUILD_PATH)
- 	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
--	printf 'CC:=$(CC)\nPKG_CONFIG:=pkg-config\nTC_CONFIG_XT:=n\nTC_CONFIG_ATM:=n\nTC_CONFIG_IPSET:=n\nIP_CONFIG_SETNS:=y\nHAVE_ELF:=n\nHAVE_MNL:=y\nHAVE_BERKELEY_DB:=n\nHAVE_LATEX:=n\nHAVE_PDFLATEX:=n\nCFLAGS+=-DHAVE_SETNS -DHAVE_LIBMNL -I$(LIBMNL_PATH)/include\nLDLIBS+=-lmnl' > $(IPROUTE2_PATH)/config.mk
-+	printf 'CC:=$(CC)\nPKG_CONFIG:=pkg-config\nTC_CONFIG_XT:=n\nTC_CONFIG_ATM:=n\nTC_CONFIG_IPSET:=n\nIP_CONFIG_SETNS:=y\nHAVE_ELF:=n\nHAVE_MNL:=n\nHAVE_BERKELEY_DB:=n\nHAVE_LATEX:=n\nHAVE_PDFLATEX:=n\nCFLAGS+=-DHAVE_SETNS\n' > $(IPROUTE2_PATH)/config.mk
- 	printf 'lib: snapshot\n\t$$(MAKE) -C lib\nip/ip: lib\n\t$$(MAKE) -C ip ip\nmisc/ss: lib\n\t$$(MAKE) -C misc ss\n' >> $(IPROUTE2_PATH)/Makefile
- 	touch $@
- 
--$(IPROUTE2_PATH)/ip/ip: | $(IPROUTE2_PATH)/.installed $(LIBMNL_PATH)/src/.libs/libmnl.a $(USERSPACE_DEPS)
--	LDFLAGS="$(LDFLAGS) -L$(LIBMNL_PATH)/src/.libs" PKG_CONFIG_LIBDIR="$(LIBMNL_PATH)" $(MAKE) -C $(IPROUTE2_PATH) PREFIX=/ ip/ip
--	$(STRIP) -s $(IPROUTE2_PATH)/ip/ip
--
--$(IPROUTE2_PATH)/misc/ss: | $(IPROUTE2_PATH)/.installed $(LIBMNL_PATH)/src/.libs/libmnl.a $(USERSPACE_DEPS)
--	LDFLAGS="$(LDFLAGS) -L$(LIBMNL_PATH)/src/.libs" PKG_CONFIG_LIBDIR="$(LIBMNL_PATH)" $(MAKE) -C $(IPROUTE2_PATH) PREFIX=/ misc/ss
--	$(STRIP) -s $(IPROUTE2_PATH)/misc/ss
-+$(IPROUTE2_PATH)/ip/ip: | $(IPROUTE2_PATH)/.installed $(USERSPACE_DEPS)
-+	$(MAKE) -C $(IPROUTE2_PATH) PREFIX=/ ip/ip
-+	$(STRIP) -s $@
-+
-+$(IPROUTE2_PATH)/misc/ss: | $(IPROUTE2_PATH)/.installed $(USERSPACE_DEPS)
-+	$(MAKE) -C $(IPROUTE2_PATH) PREFIX=/ misc/ss
-+	$(STRIP) -s $@
- 
- $(IPTABLES_PATH)/.installed: $(IPTABLES_TAR)
- 	mkdir -p $(BUILD_PATH)
-@@ -358,8 +348,8 @@ $(IPTABLES_PATH)/.installed: $(IPTABLES_
- 	sed -i -e "/nfnetlink=[01]/s:=[01]:=0:" -e "/nfconntrack=[01]/s:=[01]:=0:" $(IPTABLES_PATH)/configure
- 	touch $@
- 
--$(IPTABLES_PATH)/iptables/xtables-legacy-multi: | $(IPTABLES_PATH)/.installed $(LIBMNL_PATH)/src/.libs/libmnl.a $(USERSPACE_DEPS)
--	cd $(IPTABLES_PATH) && PKG_CONFIG_LIBDIR="$(LIBMNL_PATH)" ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared --disable-nftables --disable-bpf-compiler --disable-nfsynproxy --disable-libipq --with-kernel=$(BUILD_PATH)/include
-+$(IPTABLES_PATH)/iptables/xtables-legacy-multi: | $(IPTABLES_PATH)/.installed $(USERSPACE_DEPS)
-+	cd $(IPTABLES_PATH) && ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared --disable-nftables --disable-bpf-compiler --disable-nfsynproxy --disable-libipq --disable-connlabel --with-kernel=$(BUILD_PATH)/include
- 	$(MAKE) -C $(IPTABLES_PATH)
- 	$(STRIP) -s $@
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0087-wireguard-receive-reset-last_under_load-to-zero.patch b/target/linux/generic/backport-5.4/080-wireguard-0087-wireguard-receive-reset-last_under_load-to-zero.patch
deleted file mode 100644
index 193d28a83f..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0087-wireguard-receive-reset-last_under_load-to-zero.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 14 Feb 2020 23:57:21 +0100
-Subject: [PATCH] wireguard: receive: reset last_under_load to zero
-
-commit 2a8a4df36462aa85b0db87b7c5ea145ba67e34a8 upstream.
-
-This is a small optimization that prevents more expensive comparisons
-from happening when they are no longer necessary, by clearing the
-last_under_load variable whenever we wind up in a state where we were
-under load but we no longer are.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Suggested-by: Matt Dunwoodie <ncon@noconroy.net>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/receive.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireguard/receive.c
-+++ b/drivers/net/wireguard/receive.c
-@@ -118,10 +118,13 @@ static void wg_receive_handshake_packet(
- 
- 	under_load = skb_queue_len(&wg->incoming_handshakes) >=
- 		     MAX_QUEUED_INCOMING_HANDSHAKES / 8;
--	if (under_load)
-+	if (under_load) {
- 		last_under_load = ktime_get_coarse_boottime_ns();
--	else if (last_under_load)
-+	} else if (last_under_load) {
- 		under_load = !wg_birthdate_has_expired(last_under_load, 1);
-+		if (!under_load)
-+			last_under_load = 0;
-+	}
- 	mac_state = wg_cookie_validate_packet(&wg->cookie_checker, skb,
- 					      under_load);
- 	if ((under_load && mac_state == VALID_MAC_WITH_COOKIE) ||
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0088-wireguard-send-account-for-mtu-0-devices.patch b/target/linux/generic/backport-5.4/080-wireguard-0088-wireguard-send-account-for-mtu-0-devices.patch
deleted file mode 100644
index d84efe20f0..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0088-wireguard-send-account-for-mtu-0-devices.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 14 Feb 2020 23:57:22 +0100
-Subject: [PATCH] wireguard: send: account for mtu=0 devices
-
-commit 175f1ca9a9ed8689d2028da1a7c624bb4fb4ff7e upstream.
-
-It turns out there's an easy way to get packets queued up while still
-having an MTU of zero, and that's via persistent keep alive. This commit
-makes sure that in whatever condition, we don't wind up dividing by
-zero. Note that an MTU of zero for a wireguard interface is something
-quasi-valid, so I don't think the correct fix is to limit it via
-min_mtu. This can be reproduced easily with:
-
-ip link add wg0 type wireguard
-ip link add wg1 type wireguard
-ip link set wg0 up mtu 0
-ip link set wg1 up
-wg set wg0 private-key <(wg genkey)
-wg set wg1 listen-port 1 private-key <(wg genkey) peer $(wg show wg0 public-key)
-wg set wg0 peer $(wg show wg1 public-key) persistent-keepalive 1 endpoint 127.0.0.1:1
-
-However, while min_mtu=0 seems fine, it makes sense to restrict the
-max_mtu. This commit also restricts the maximum MTU to the greatest
-number for which rounding up to the padding multiple won't overflow a
-signed integer. Packets this large were always rejected anyway
-eventually, due to checks deeper in, but it seems more sound not to even
-let the administrator configure something that won't work anyway.
-
-We use this opportunity to clean up this function a bit so that it's
-clear which paths we're expecting.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Cc: Eric Dumazet <eric.dumazet@gmail.com>
-Reviewed-by: Eric Dumazet <edumazet@google.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/device.c |  7 ++++---
- drivers/net/wireguard/send.c   | 16 +++++++++++-----
- 2 files changed, 15 insertions(+), 8 deletions(-)
-
---- a/drivers/net/wireguard/device.c
-+++ b/drivers/net/wireguard/device.c
-@@ -258,6 +258,8 @@ static void wg_setup(struct net_device *
- 	enum { WG_NETDEV_FEATURES = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
- 				    NETIF_F_SG | NETIF_F_GSO |
- 				    NETIF_F_GSO_SOFTWARE | NETIF_F_HIGHDMA };
-+	const int overhead = MESSAGE_MINIMUM_LENGTH + sizeof(struct udphdr) +
-+			     max(sizeof(struct ipv6hdr), sizeof(struct iphdr));
- 
- 	dev->netdev_ops = &netdev_ops;
- 	dev->hard_header_len = 0;
-@@ -271,9 +273,8 @@ static void wg_setup(struct net_device *
- 	dev->features |= WG_NETDEV_FEATURES;
- 	dev->hw_features |= WG_NETDEV_FEATURES;
- 	dev->hw_enc_features |= WG_NETDEV_FEATURES;
--	dev->mtu = ETH_DATA_LEN - MESSAGE_MINIMUM_LENGTH -
--		   sizeof(struct udphdr) -
--		   max(sizeof(struct ipv6hdr), sizeof(struct iphdr));
-+	dev->mtu = ETH_DATA_LEN - overhead;
-+	dev->max_mtu = round_down(INT_MAX, MESSAGE_PADDING_MULTIPLE) - overhead;
- 
- 	SET_NETDEV_DEVTYPE(dev, &device_type);
- 
---- a/drivers/net/wireguard/send.c
-+++ b/drivers/net/wireguard/send.c
-@@ -143,16 +143,22 @@ static void keep_key_fresh(struct wg_pee
- 
- static unsigned int calculate_skb_padding(struct sk_buff *skb)
- {
-+	unsigned int padded_size, last_unit = skb->len;
-+
-+	if (unlikely(!PACKET_CB(skb)->mtu))
-+		return ALIGN(last_unit, MESSAGE_PADDING_MULTIPLE) - last_unit;
-+
- 	/* We do this modulo business with the MTU, just in case the networking
- 	 * layer gives us a packet that's bigger than the MTU. In that case, we
- 	 * wouldn't want the final subtraction to overflow in the case of the
--	 * padded_size being clamped.
-+	 * padded_size being clamped. Fortunately, that's very rarely the case,
-+	 * so we optimize for that not happening.
- 	 */
--	unsigned int last_unit = skb->len % PACKET_CB(skb)->mtu;
--	unsigned int padded_size = ALIGN(last_unit, MESSAGE_PADDING_MULTIPLE);
-+	if (unlikely(last_unit > PACKET_CB(skb)->mtu))
-+		last_unit %= PACKET_CB(skb)->mtu;
- 
--	if (padded_size > PACKET_CB(skb)->mtu)
--		padded_size = PACKET_CB(skb)->mtu;
-+	padded_size = min(PACKET_CB(skb)->mtu,
-+			  ALIGN(last_unit, MESSAGE_PADDING_MULTIPLE));
- 	return padded_size - last_unit;
- }
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0089-wireguard-socket-remove-extra-call-to-synchronize_ne.patch b/target/linux/generic/backport-5.4/080-wireguard-0089-wireguard-socket-remove-extra-call-to-synchronize_ne.patch
deleted file mode 100644
index 458e9d51e5..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0089-wireguard-socket-remove-extra-call-to-synchronize_ne.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 14 Feb 2020 23:57:23 +0100
-Subject: [PATCH] wireguard: socket: remove extra call to synchronize_net
-
-commit 1fbc33b0a7feb6ca72bf7dc8a05d81485ee8ee2e upstream.
-
-synchronize_net() is a wrapper around synchronize_rcu(), so there's no
-point in having synchronize_net and synchronize_rcu back to back,
-despite the documentation comment suggesting maybe it's somewhat useful,
-"Wait for packets currently being received to be done." This commit
-removes the extra call.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
-Reviewed-by: Eric Dumazet <edumazet@google.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/socket.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/net/wireguard/socket.c
-+++ b/drivers/net/wireguard/socket.c
-@@ -432,7 +432,6 @@ void wg_socket_reinit(struct wg_device *
- 		wg->incoming_port = ntohs(inet_sk(new4)->inet_sport);
- 	mutex_unlock(&wg->socket_update_lock);
- 	synchronize_rcu();
--	synchronize_net();
- 	sock_free(old4);
- 	sock_free(old6);
- }
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0090-wireguard-selftests-remove-duplicated-include-sys-ty.patch b/target/linux/generic/backport-5.4/080-wireguard-0090-wireguard-selftests-remove-duplicated-include-sys-ty.patch
deleted file mode 100644
index 93545e6760..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0090-wireguard-selftests-remove-duplicated-include-sys-ty.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: YueHaibing <yuehaibing@huawei.com>
-Date: Wed, 18 Mar 2020 18:30:43 -0600
-Subject: [PATCH] wireguard: selftests: remove duplicated include <sys/types.h>
-
-commit 166391159c5deb84795d2ff46e95f276177fa5fb upstream.
-
-This commit removes a duplicated include.
-
-Signed-off-by: YueHaibing <yuehaibing@huawei.com>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- tools/testing/selftests/wireguard/qemu/init.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/tools/testing/selftests/wireguard/qemu/init.c
-+++ b/tools/testing/selftests/wireguard/qemu/init.c
-@@ -13,7 +13,6 @@
- #include <fcntl.h>
- #include <sys/wait.h>
- #include <sys/mount.h>
--#include <sys/types.h>
- #include <sys/stat.h>
- #include <sys/types.h>
- #include <sys/io.h>
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0091-wireguard-queueing-account-for-skb-protocol-0.patch b/target/linux/generic/backport-5.4/080-wireguard-0091-wireguard-queueing-account-for-skb-protocol-0.patch
deleted file mode 100644
index a9ca655e74..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0091-wireguard-queueing-account-for-skb-protocol-0.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Wed, 18 Mar 2020 18:30:45 -0600
-Subject: [PATCH] wireguard: queueing: account for skb->protocol==0
-
-commit a5588604af448664e796daf3c1d5a4523c60667b upstream.
-
-We carry out checks to the effect of:
-
-  if (skb->protocol != wg_examine_packet_protocol(skb))
-    goto err;
-
-By having wg_skb_examine_untrusted_ip_hdr return 0 on failure, this
-means that the check above still passes in the case where skb->protocol
-is zero, which is possible to hit with AF_PACKET:
-
-  struct sockaddr_pkt saddr = { .spkt_device = "wg0" };
-  unsigned char buffer[5] = { 0 };
-  sendto(socket(AF_PACKET, SOCK_PACKET, /* skb->protocol = */ 0),
-         buffer, sizeof(buffer), 0, (const struct sockaddr *)&saddr, sizeof(saddr));
-
-Additional checks mean that this isn't actually a problem in the code
-base, but I could imagine it becoming a problem later if the function is
-used more liberally.
-
-I would prefer to fix this by having wg_examine_packet_protocol return a
-32-bit ~0 value on failure, which will never match any value of
-skb->protocol, which would simply change the generated code from a mov
-to a movzx. However, sparse complains, and adding __force casts doesn't
-seem like a good idea, so instead we just add a simple helper function
-to check for the zero return value. Since wg_examine_packet_protocol
-itself gets inlined, this winds up not adding an additional branch to
-the generated code, since the 0 return value already happens in a
-mergable branch.
-
-Reported-by: Fabian Freyer <fabianfreyer@radicallyopensecurity.com>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/device.c   | 2 +-
- drivers/net/wireguard/queueing.h | 8 +++++++-
- drivers/net/wireguard/receive.c  | 4 ++--
- 3 files changed, 10 insertions(+), 4 deletions(-)
-
---- a/drivers/net/wireguard/device.c
-+++ b/drivers/net/wireguard/device.c
-@@ -122,7 +122,7 @@ static netdev_tx_t wg_xmit(struct sk_buf
- 	u32 mtu;
- 	int ret;
- 
--	if (unlikely(wg_skb_examine_untrusted_ip_hdr(skb) != skb->protocol)) {
-+	if (unlikely(!wg_check_packet_protocol(skb))) {
- 		ret = -EPROTONOSUPPORT;
- 		net_dbg_ratelimited("%s: Invalid IP packet\n", dev->name);
- 		goto err;
---- a/drivers/net/wireguard/queueing.h
-+++ b/drivers/net/wireguard/queueing.h
-@@ -66,7 +66,7 @@ struct packet_cb {
- #define PACKET_PEER(skb) (PACKET_CB(skb)->keypair->entry.peer)
- 
- /* Returns either the correct skb->protocol value, or 0 if invalid. */
--static inline __be16 wg_skb_examine_untrusted_ip_hdr(struct sk_buff *skb)
-+static inline __be16 wg_examine_packet_protocol(struct sk_buff *skb)
- {
- 	if (skb_network_header(skb) >= skb->head &&
- 	    (skb_network_header(skb) + sizeof(struct iphdr)) <=
-@@ -81,6 +81,12 @@ static inline __be16 wg_skb_examine_untr
- 	return 0;
- }
- 
-+static inline bool wg_check_packet_protocol(struct sk_buff *skb)
-+{
-+	__be16 real_protocol = wg_examine_packet_protocol(skb);
-+	return real_protocol && skb->protocol == real_protocol;
-+}
-+
- static inline void wg_reset_packet(struct sk_buff *skb)
- {
- 	skb_scrub_packet(skb, true);
---- a/drivers/net/wireguard/receive.c
-+++ b/drivers/net/wireguard/receive.c
-@@ -56,7 +56,7 @@ static int prepare_skb_header(struct sk_
- 	size_t data_offset, data_len, header_len;
- 	struct udphdr *udp;
- 
--	if (unlikely(wg_skb_examine_untrusted_ip_hdr(skb) != skb->protocol ||
-+	if (unlikely(!wg_check_packet_protocol(skb) ||
- 		     skb_transport_header(skb) < skb->head ||
- 		     (skb_transport_header(skb) + sizeof(struct udphdr)) >
- 			     skb_tail_pointer(skb)))
-@@ -388,7 +388,7 @@ static void wg_packet_consume_data_done(
- 	 */
- 	skb->ip_summed = CHECKSUM_UNNECESSARY;
- 	skb->csum_level = ~0; /* All levels */
--	skb->protocol = wg_skb_examine_untrusted_ip_hdr(skb);
-+	skb->protocol = wg_examine_packet_protocol(skb);
- 	if (skb->protocol == htons(ETH_P_IP)) {
- 		len = ntohs(ip_hdr(skb)->tot_len);
- 		if (unlikely(len < sizeof(struct iphdr)))
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0092-wireguard-receive-remove-dead-code-from-default-pack.patch b/target/linux/generic/backport-5.4/080-wireguard-0092-wireguard-receive-remove-dead-code-from-default-pack.patch
deleted file mode 100644
index bcd4fbfbc1..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0092-wireguard-receive-remove-dead-code-from-default-pack.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Wed, 18 Mar 2020 18:30:46 -0600
-Subject: [PATCH] wireguard: receive: remove dead code from default packet type
- case
-
-commit 2b8765c52db24c0fbcc81bac9b5e8390f2c7d3c8 upstream.
-
-The situation in which we wind up hitting the default case here
-indicates a major bug in earlier parsing code. It is not a usual thing
-that should ever happen, which means a "friendly" message for it doesn't
-make sense. Rather, replace this with a WARN_ON, just like we do earlier
-in the file for a similar situation, so that somebody sends us a bug
-report and we can fix it.
-
-Reported-by: Fabian Freyer <fabianfreyer@radicallyopensecurity.com>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/receive.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/net/wireguard/receive.c
-+++ b/drivers/net/wireguard/receive.c
-@@ -587,8 +587,7 @@ void wg_packet_receive(struct wg_device
- 		wg_packet_consume_data(wg, skb);
- 		break;
- 	default:
--		net_dbg_skb_ratelimited("%s: Invalid packet from %pISpfsc\n",
--					wg->dev->name, skb);
-+		WARN(1, "Non-exhaustive parsing of packet header lead to unknown packet type!\n");
- 		goto err;
- 	}
- 	return;
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0093-wireguard-noise-error-out-precomputed-DH-during-hand.patch b/target/linux/generic/backport-5.4/080-wireguard-0093-wireguard-noise-error-out-precomputed-DH-during-hand.patch
deleted file mode 100644
index dac3046e47..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0093-wireguard-noise-error-out-precomputed-DH-during-hand.patch
+++ /dev/null
@@ -1,224 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Wed, 18 Mar 2020 18:30:47 -0600
-Subject: [PATCH] wireguard: noise: error out precomputed DH during handshake
- rather than config
-
-commit 11a7686aa99c7fe4b3f80f6dcccd54129817984d upstream.
-
-We precompute the static-static ECDH during configuration time, in order
-to save an expensive computation later when receiving network packets.
-However, not all ECDH computations yield a contributory result. Prior,
-we were just not letting those peers be added to the interface. However,
-this creates a strange inconsistency, since it was still possible to add
-other weird points, like a valid public key plus a low-order point, and,
-like points that result in zeros, a handshake would not complete. In
-order to make the behavior more uniform and less surprising, simply
-allow all peers to be added. Then, we'll error out later when doing the
-crypto if there's an issue. This also adds more separation between the
-crypto layer and the configuration layer.
-
-Discussed-with: Mathias Hall-Andersen <mathias@hall-andersen.dk>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/netlink.c            |  8 +---
- drivers/net/wireguard/noise.c              | 55 ++++++++++++----------
- drivers/net/wireguard/noise.h              | 12 ++---
- drivers/net/wireguard/peer.c               |  7 +--
- tools/testing/selftests/wireguard/netns.sh | 15 ++++--
- 5 files changed, 49 insertions(+), 48 deletions(-)
-
---- a/drivers/net/wireguard/netlink.c
-+++ b/drivers/net/wireguard/netlink.c
-@@ -417,11 +417,7 @@ static int set_peer(struct wg_device *wg
- 
- 		peer = wg_peer_create(wg, public_key, preshared_key);
- 		if (IS_ERR(peer)) {
--			/* Similar to the above, if the key is invalid, we skip
--			 * it without fanfare, so that services don't need to
--			 * worry about doing key validation themselves.
--			 */
--			ret = PTR_ERR(peer) == -EKEYREJECTED ? 0 : PTR_ERR(peer);
-+			ret = PTR_ERR(peer);
- 			peer = NULL;
- 			goto out;
- 		}
-@@ -575,7 +571,7 @@ static int wg_set_device(struct sk_buff
- 							 private_key);
- 		list_for_each_entry_safe(peer, temp, &wg->peer_list,
- 					 peer_list) {
--			BUG_ON(!wg_noise_precompute_static_static(peer));
-+			wg_noise_precompute_static_static(peer);
- 			wg_noise_expire_current_peer_keypairs(peer);
- 		}
- 		wg_cookie_checker_precompute_device_keys(&wg->cookie_checker);
---- a/drivers/net/wireguard/noise.c
-+++ b/drivers/net/wireguard/noise.c
-@@ -44,32 +44,23 @@ void __init wg_noise_init(void)
- }
- 
- /* Must hold peer->handshake.static_identity->lock */
--bool wg_noise_precompute_static_static(struct wg_peer *peer)
-+void wg_noise_precompute_static_static(struct wg_peer *peer)
- {
--	bool ret;
--
- 	down_write(&peer->handshake.lock);
--	if (peer->handshake.static_identity->has_identity) {
--		ret = curve25519(
--			peer->handshake.precomputed_static_static,
-+	if (!peer->handshake.static_identity->has_identity ||
-+	    !curve25519(peer->handshake.precomputed_static_static,
- 			peer->handshake.static_identity->static_private,
--			peer->handshake.remote_static);
--	} else {
--		u8 empty[NOISE_PUBLIC_KEY_LEN] = { 0 };
--
--		ret = curve25519(empty, empty, peer->handshake.remote_static);
-+			peer->handshake.remote_static))
- 		memset(peer->handshake.precomputed_static_static, 0,
- 		       NOISE_PUBLIC_KEY_LEN);
--	}
- 	up_write(&peer->handshake.lock);
--	return ret;
- }
- 
--bool wg_noise_handshake_init(struct noise_handshake *handshake,
--			   struct noise_static_identity *static_identity,
--			   const u8 peer_public_key[NOISE_PUBLIC_KEY_LEN],
--			   const u8 peer_preshared_key[NOISE_SYMMETRIC_KEY_LEN],
--			   struct wg_peer *peer)
-+void wg_noise_handshake_init(struct noise_handshake *handshake,
-+			     struct noise_static_identity *static_identity,
-+			     const u8 peer_public_key[NOISE_PUBLIC_KEY_LEN],
-+			     const u8 peer_preshared_key[NOISE_SYMMETRIC_KEY_LEN],
-+			     struct wg_peer *peer)
- {
- 	memset(handshake, 0, sizeof(*handshake));
- 	init_rwsem(&handshake->lock);
-@@ -81,7 +72,7 @@ bool wg_noise_handshake_init(struct nois
- 		       NOISE_SYMMETRIC_KEY_LEN);
- 	handshake->static_identity = static_identity;
- 	handshake->state = HANDSHAKE_ZEROED;
--	return wg_noise_precompute_static_static(peer);
-+	wg_noise_precompute_static_static(peer);
- }
- 
- static void handshake_zero(struct noise_handshake *handshake)
-@@ -403,6 +394,19 @@ static bool __must_check mix_dh(u8 chain
- 	return true;
- }
- 
-+static bool __must_check mix_precomputed_dh(u8 chaining_key[NOISE_HASH_LEN],
-+					    u8 key[NOISE_SYMMETRIC_KEY_LEN],
-+					    const u8 precomputed[NOISE_PUBLIC_KEY_LEN])
-+{
-+	static u8 zero_point[NOISE_PUBLIC_KEY_LEN];
-+	if (unlikely(!crypto_memneq(precomputed, zero_point, NOISE_PUBLIC_KEY_LEN)))
-+		return false;
-+	kdf(chaining_key, key, NULL, precomputed, NOISE_HASH_LEN,
-+	    NOISE_SYMMETRIC_KEY_LEN, 0, NOISE_PUBLIC_KEY_LEN,
-+	    chaining_key);
-+	return true;
-+}
-+
- static void mix_hash(u8 hash[NOISE_HASH_LEN], const u8 *src, size_t src_len)
- {
- 	struct blake2s_state blake;
-@@ -531,10 +535,9 @@ wg_noise_handshake_create_initiation(str
- 			NOISE_PUBLIC_KEY_LEN, key, handshake->hash);
- 
- 	/* ss */
--	kdf(handshake->chaining_key, key, NULL,
--	    handshake->precomputed_static_static, NOISE_HASH_LEN,
--	    NOISE_SYMMETRIC_KEY_LEN, 0, NOISE_PUBLIC_KEY_LEN,
--	    handshake->chaining_key);
-+	if (!mix_precomputed_dh(handshake->chaining_key, key,
-+				handshake->precomputed_static_static))
-+		goto out;
- 
- 	/* {t} */
- 	tai64n_now(timestamp);
-@@ -595,9 +598,9 @@ wg_noise_handshake_consume_initiation(st
- 	handshake = &peer->handshake;
- 
- 	/* ss */
--	kdf(chaining_key, key, NULL, handshake->precomputed_static_static,
--	    NOISE_HASH_LEN, NOISE_SYMMETRIC_KEY_LEN, 0, NOISE_PUBLIC_KEY_LEN,
--	    chaining_key);
-+	if (!mix_precomputed_dh(chaining_key, key,
-+				handshake->precomputed_static_static))
-+	    goto out;
- 
- 	/* {t} */
- 	if (!message_decrypt(t, src->encrypted_timestamp,
---- a/drivers/net/wireguard/noise.h
-+++ b/drivers/net/wireguard/noise.h
-@@ -94,11 +94,11 @@ struct noise_handshake {
- struct wg_device;
- 
- void wg_noise_init(void);
--bool wg_noise_handshake_init(struct noise_handshake *handshake,
--			   struct noise_static_identity *static_identity,
--			   const u8 peer_public_key[NOISE_PUBLIC_KEY_LEN],
--			   const u8 peer_preshared_key[NOISE_SYMMETRIC_KEY_LEN],
--			   struct wg_peer *peer);
-+void wg_noise_handshake_init(struct noise_handshake *handshake,
-+			     struct noise_static_identity *static_identity,
-+			     const u8 peer_public_key[NOISE_PUBLIC_KEY_LEN],
-+			     const u8 peer_preshared_key[NOISE_SYMMETRIC_KEY_LEN],
-+			     struct wg_peer *peer);
- void wg_noise_handshake_clear(struct noise_handshake *handshake);
- static inline void wg_noise_reset_last_sent_handshake(atomic64_t *handshake_ns)
- {
-@@ -116,7 +116,7 @@ void wg_noise_expire_current_peer_keypai
- void wg_noise_set_static_identity_private_key(
- 	struct noise_static_identity *static_identity,
- 	const u8 private_key[NOISE_PUBLIC_KEY_LEN]);
--bool wg_noise_precompute_static_static(struct wg_peer *peer);
-+void wg_noise_precompute_static_static(struct wg_peer *peer);
- 
- bool
- wg_noise_handshake_create_initiation(struct message_handshake_initiation *dst,
---- a/drivers/net/wireguard/peer.c
-+++ b/drivers/net/wireguard/peer.c
-@@ -34,11 +34,8 @@ struct wg_peer *wg_peer_create(struct wg
- 		return ERR_PTR(ret);
- 	peer->device = wg;
- 
--	if (!wg_noise_handshake_init(&peer->handshake, &wg->static_identity,
--				     public_key, preshared_key, peer)) {
--		ret = -EKEYREJECTED;
--		goto err_1;
--	}
-+	wg_noise_handshake_init(&peer->handshake, &wg->static_identity,
-+				public_key, preshared_key, peer);
- 	if (dst_cache_init(&peer->endpoint_cache, GFP_KERNEL))
- 		goto err_1;
- 	if (wg_packet_queue_init(&peer->tx_queue, wg_packet_tx_worker, false,
---- a/tools/testing/selftests/wireguard/netns.sh
-+++ b/tools/testing/selftests/wireguard/netns.sh
-@@ -527,11 +527,16 @@ n0 wg set wg0 peer "$pub2" allowed-ips 0
- n0 wg set wg0 peer "$pub2" allowed-ips ::/0,1700::/111,5000::/4,e000::/37,9000::/75
- n0 wg set wg0 peer "$pub2" allowed-ips ::/0
- n0 wg set wg0 peer "$pub2" remove
--low_order_points=( AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= AQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= 4Ot6fDtBuK4WVuP68Z/EatoJjeucMrH9hmIFFl9JuAA= X5yVvKNQjCSx0LFVnIPvWwREXMRYHI6G2CJO3dCfEVc= 7P///////////////////////////////////////38= 7f///////////////////////////////////////38= 7v///////////////////////////////////////38= )
--n0 wg set wg0 private-key /dev/null ${low_order_points[@]/#/peer }
--[[ -z $(n0 wg show wg0 peers) ]]
--n0 wg set wg0 private-key <(echo "$key1") ${low_order_points[@]/#/peer }
--[[ -z $(n0 wg show wg0 peers) ]]
-+for low_order_point in AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= AQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= 4Ot6fDtBuK4WVuP68Z/EatoJjeucMrH9hmIFFl9JuAA= X5yVvKNQjCSx0LFVnIPvWwREXMRYHI6G2CJO3dCfEVc= 7P///////////////////////////////////////38= 7f///////////////////////////////////////38= 7v///////////////////////////////////////38=; do
-+	n0 wg set wg0 peer "$low_order_point" persistent-keepalive 1 endpoint 127.0.0.1:1111
-+done
-+[[ -n $(n0 wg show wg0 peers) ]]
-+exec 4< <(n0 ncat -l -u -p 1111)
-+ncat_pid=$!
-+waitncatudp $netns0 $ncat_pid
-+ip0 link set wg0 up
-+! read -r -n 1 -t 2 <&4 || false
-+kill $ncat_pid
- ip0 link del wg0
- 
- declare -A objects
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0094-wireguard-send-remove-errant-newline-from-packet_enc.patch b/target/linux/generic/backport-5.4/080-wireguard-0094-wireguard-send-remove-errant-newline-from-packet_enc.patch
deleted file mode 100644
index c92b6a784a..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0094-wireguard-send-remove-errant-newline-from-packet_enc.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Sultan Alsawaf <sultan@kerneltoast.com>
-Date: Wed, 29 Apr 2020 14:59:20 -0600
-Subject: [PATCH] wireguard: send: remove errant newline from
- packet_encrypt_worker
-
-commit d6833e42786e050e7522d6a91a9361e54085897d upstream.
-
-This commit removes a useless newline at the end of a scope, which
-doesn't add anything in the way of organization or readability.
-
-Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/send.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/net/wireguard/send.c
-+++ b/drivers/net/wireguard/send.c
-@@ -304,7 +304,6 @@ void wg_packet_encrypt_worker(struct wor
- 		}
- 		wg_queue_enqueue_per_peer(&PACKET_PEER(first)->tx_queue, first,
- 					  state);
--
- 	}
- }
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0095-wireguard-queueing-cleanup-ptr_ring-in-error-path-of.patch b/target/linux/generic/backport-5.4/080-wireguard-0095-wireguard-queueing-cleanup-ptr_ring-in-error-path-of.patch
deleted file mode 100644
index a72c509894..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0095-wireguard-queueing-cleanup-ptr_ring-in-error-path-of.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Wed, 29 Apr 2020 14:59:21 -0600
-Subject: [PATCH] wireguard: queueing: cleanup ptr_ring in error path of
- packet_queue_init
-
-commit 130c58606171326c81841a49cc913cd354113dd9 upstream.
-
-Prior, if the alloc_percpu of packet_percpu_multicore_worker_alloc
-failed, the previously allocated ptr_ring wouldn't be freed. This commit
-adds the missing call to ptr_ring_cleanup in the error case.
-
-Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/queueing.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireguard/queueing.c
-+++ b/drivers/net/wireguard/queueing.c
-@@ -35,8 +35,10 @@ int wg_packet_queue_init(struct crypt_qu
- 		if (multicore) {
- 			queue->worker = wg_packet_percpu_multicore_worker_alloc(
- 				function, queue);
--			if (!queue->worker)
-+			if (!queue->worker) {
-+				ptr_ring_cleanup(&queue->ring, NULL);
- 				return -ENOMEM;
-+			}
- 		} else {
- 			INIT_WORK(&queue->work, function);
- 		}
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0096-wireguard-receive-use-tunnel-helpers-for-decapsulati.patch b/target/linux/generic/backport-5.4/080-wireguard-0096-wireguard-receive-use-tunnel-helpers-for-decapsulati.patch
deleted file mode 100644
index a72358c302..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0096-wireguard-receive-use-tunnel-helpers-for-decapsulati.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= <toke@redhat.com>
-Date: Wed, 29 Apr 2020 14:59:22 -0600
-Subject: [PATCH] wireguard: receive: use tunnel helpers for decapsulating ECN
- markings
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-commit eebabcb26ea1e3295704477c6cd4e772c96a9559 upstream.
-
-WireGuard currently only propagates ECN markings on tunnel decap according
-to the old RFC3168 specification. However, the spec has since been updated
-in RFC6040 to recommend slightly different decapsulation semantics. This
-was implemented in the kernel as a set of common helpers for ECN
-decapsulation, so let's just switch over WireGuard to using those, so it
-can benefit from this enhancement and any future tweaks. We do not drop
-packets with invalid ECN marking combinations, because WireGuard is
-frequently used to work around broken ISPs, which could be doing that.
-
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Reported-by: Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com>
-Cc: Dave Taht <dave.taht@gmail.com>
-Cc: Rodney W. Grimes <ietf@gndrsh.dnsmgr.net>
-Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/receive.c | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/drivers/net/wireguard/receive.c
-+++ b/drivers/net/wireguard/receive.c
-@@ -393,13 +393,11 @@ static void wg_packet_consume_data_done(
- 		len = ntohs(ip_hdr(skb)->tot_len);
- 		if (unlikely(len < sizeof(struct iphdr)))
- 			goto dishonest_packet_size;
--		if (INET_ECN_is_ce(PACKET_CB(skb)->ds))
--			IP_ECN_set_ce(ip_hdr(skb));
-+		INET_ECN_decapsulate(skb, PACKET_CB(skb)->ds, ip_hdr(skb)->tos);
- 	} else if (skb->protocol == htons(ETH_P_IPV6)) {
- 		len = ntohs(ipv6_hdr(skb)->payload_len) +
- 		      sizeof(struct ipv6hdr);
--		if (INET_ECN_is_ce(PACKET_CB(skb)->ds))
--			IP6_ECN_set_ce(skb, ipv6_hdr(skb));
-+		INET_ECN_decapsulate(skb, PACKET_CB(skb)->ds, ipv6_get_dsfield(ipv6_hdr(skb)));
- 	} else {
- 		goto dishonest_packet_type;
- 	}
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0097-wireguard-selftests-use-normal-kernel-stack-size-on-.patch b/target/linux/generic/backport-5.4/080-wireguard-0097-wireguard-selftests-use-normal-kernel-stack-size-on-.patch
deleted file mode 100644
index f4543d2568..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0097-wireguard-selftests-use-normal-kernel-stack-size-on-.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Wed, 6 May 2020 15:33:02 -0600
-Subject: [PATCH] wireguard: selftests: use normal kernel stack size on ppc64
-
-commit a0fd7cc87a018df1a17f9d3f0bd994c1f22c6b34 upstream.
-
-While at some point it might have made sense to be running these tests
-on ppc64 with 4k stacks, the kernel hasn't actually used 4k stacks on
-64-bit powerpc in a long time, and more interesting things that we test
-don't really work when we deviate from the default (16k). So, we stop
-pushing our luck in this commit, and return to the default instead of
-the minimum.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config
-+++ b/tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config
-@@ -10,3 +10,4 @@ CONFIG_CMDLINE_BOOL=y
- CONFIG_CMDLINE="console=hvc0 wg.success=hvc1"
- CONFIG_SECTION_MISMATCH_WARN_ONLY=y
- CONFIG_FRAME_WARN=1280
-+CONFIG_THREAD_SHIFT=14
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0098-wireguard-socket-remove-errant-restriction-on-loopin.patch b/target/linux/generic/backport-5.4/080-wireguard-0098-wireguard-socket-remove-errant-restriction-on-loopin.patch
deleted file mode 100644
index 6dafa4781b..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0098-wireguard-socket-remove-errant-restriction-on-loopin.patch
+++ /dev/null
@@ -1,162 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Wed, 6 May 2020 15:33:03 -0600
-Subject: [PATCH] wireguard: socket: remove errant restriction on looping to
- self
-
-commit b673e24aad36981f327a6570412ffa7754de8911 upstream.
-
-It's already possible to create two different interfaces and loop
-packets between them. This has always been possible with tunnels in the
-kernel, and isn't specific to wireguard. Therefore, the networking stack
-already needs to deal with that. At the very least, the packet winds up
-exceeding the MTU and is discarded at that point. So, since this is
-already something that happens, there's no need to forbid the not very
-exceptional case of routing a packet back to the same interface; this
-loop is no different than others, and we shouldn't special case it, but
-rather rely on generic handling of loops in general. This also makes it
-easier to do interesting things with wireguard such as onion routing.
-
-At the same time, we add a selftest for this, ensuring that both onion
-routing works and infinite routing loops do not crash the kernel. We
-also add a test case for wireguard interfaces nesting packets and
-sending traffic between each other, as well as the loop in this case
-too. We make sure to send some throughput-heavy traffic for this use
-case, to stress out any possible recursion issues with the locks around
-workqueues.
-
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/socket.c             | 12 -----
- tools/testing/selftests/wireguard/netns.sh | 54 ++++++++++++++++++++--
- 2 files changed, 51 insertions(+), 15 deletions(-)
-
---- a/drivers/net/wireguard/socket.c
-+++ b/drivers/net/wireguard/socket.c
-@@ -76,12 +76,6 @@ static int send4(struct wg_device *wg, s
- 			net_dbg_ratelimited("%s: No route to %pISpfsc, error %d\n",
- 					    wg->dev->name, &endpoint->addr, ret);
- 			goto err;
--		} else if (unlikely(rt->dst.dev == skb->dev)) {
--			ip_rt_put(rt);
--			ret = -ELOOP;
--			net_dbg_ratelimited("%s: Avoiding routing loop to %pISpfsc\n",
--					    wg->dev->name, &endpoint->addr);
--			goto err;
- 		}
- 		if (cache)
- 			dst_cache_set_ip4(cache, &rt->dst, fl.saddr);
-@@ -149,12 +143,6 @@ static int send6(struct wg_device *wg, s
- 			net_dbg_ratelimited("%s: No route to %pISpfsc, error %d\n",
- 					    wg->dev->name, &endpoint->addr, ret);
- 			goto err;
--		} else if (unlikely(dst->dev == skb->dev)) {
--			dst_release(dst);
--			ret = -ELOOP;
--			net_dbg_ratelimited("%s: Avoiding routing loop to %pISpfsc\n",
--					    wg->dev->name, &endpoint->addr);
--			goto err;
- 		}
- 		if (cache)
- 			dst_cache_set_ip6(cache, dst, &fl.saddr);
---- a/tools/testing/selftests/wireguard/netns.sh
-+++ b/tools/testing/selftests/wireguard/netns.sh
-@@ -48,8 +48,11 @@ cleanup() {
- 	exec 2>/dev/null
- 	printf "$orig_message_cost" > /proc/sys/net/core/message_cost
- 	ip0 link del dev wg0
-+	ip0 link del dev wg1
- 	ip1 link del dev wg0
-+	ip1 link del dev wg1
- 	ip2 link del dev wg0
-+	ip2 link del dev wg1
- 	local to_kill="$(ip netns pids $netns0) $(ip netns pids $netns1) $(ip netns pids $netns2)"
- 	[[ -n $to_kill ]] && kill $to_kill
- 	pp ip netns del $netns1
-@@ -77,18 +80,20 @@ ip0 link set wg0 netns $netns2
- key1="$(pp wg genkey)"
- key2="$(pp wg genkey)"
- key3="$(pp wg genkey)"
-+key4="$(pp wg genkey)"
- pub1="$(pp wg pubkey <<<"$key1")"
- pub2="$(pp wg pubkey <<<"$key2")"
- pub3="$(pp wg pubkey <<<"$key3")"
-+pub4="$(pp wg pubkey <<<"$key4")"
- psk="$(pp wg genpsk)"
- [[ -n $key1 && -n $key2 && -n $psk ]]
- 
- configure_peers() {
- 	ip1 addr add 192.168.241.1/24 dev wg0
--	ip1 addr add fd00::1/24 dev wg0
-+	ip1 addr add fd00::1/112 dev wg0
- 
- 	ip2 addr add 192.168.241.2/24 dev wg0
--	ip2 addr add fd00::2/24 dev wg0
-+	ip2 addr add fd00::2/112 dev wg0
- 
- 	n1 wg set wg0 \
- 		private-key <(echo "$key1") \
-@@ -230,9 +235,38 @@ n1 ping -W 1 -c 1 192.168.241.2
- n1 wg set wg0 private-key <(echo "$key3")
- n2 wg set wg0 peer "$pub3" preshared-key <(echo "$psk") allowed-ips 192.168.241.1/32 peer "$pub1" remove
- n1 ping -W 1 -c 1 192.168.241.2
-+n2 wg set wg0 peer "$pub3" remove
- 
--ip1 link del wg0
-+# Test that we can route wg through wg
-+ip1 addr flush dev wg0
-+ip2 addr flush dev wg0
-+ip1 addr add fd00::5:1/112 dev wg0
-+ip2 addr add fd00::5:2/112 dev wg0
-+n1 wg set wg0 private-key <(echo "$key1") peer "$pub2" preshared-key <(echo "$psk") allowed-ips fd00::5:2/128 endpoint 127.0.0.1:2
-+n2 wg set wg0 private-key <(echo "$key2") listen-port 2 peer "$pub1" preshared-key <(echo "$psk") allowed-ips fd00::5:1/128 endpoint 127.212.121.99:9998
-+ip1 link add wg1 type wireguard
-+ip2 link add wg1 type wireguard
-+ip1 addr add 192.168.241.1/24 dev wg1
-+ip1 addr add fd00::1/112 dev wg1
-+ip2 addr add 192.168.241.2/24 dev wg1
-+ip2 addr add fd00::2/112 dev wg1
-+ip1 link set mtu 1340 up dev wg1
-+ip2 link set mtu 1340 up dev wg1
-+n1 wg set wg1 listen-port 5 private-key <(echo "$key3") peer "$pub4" allowed-ips 192.168.241.2/32,fd00::2/128 endpoint [fd00::5:2]:5
-+n2 wg set wg1 listen-port 5 private-key <(echo "$key4") peer "$pub3" allowed-ips 192.168.241.1/32,fd00::1/128 endpoint [fd00::5:1]:5
-+tests
-+# Try to set up a routing loop between the two namespaces
-+ip1 link set netns $netns0 dev wg1
-+ip0 addr add 192.168.241.1/24 dev wg1
-+ip0 link set up dev wg1
-+n0 ping -W 1 -c 1 192.168.241.2
-+n1 wg set wg0 peer "$pub2" endpoint 192.168.241.2:7
- ip2 link del wg0
-+ip2 link del wg1
-+! n0 ping -W 1 -c 10 -f 192.168.241.2 || false # Should not crash kernel
-+
-+ip0 link del wg1
-+ip1 link del wg0
- 
- # Test using NAT. We now change the topology to this:
- # ┌────────────────────────────────────────�    ┌────────────────────────────────────────────────�     ┌────────────────────────────────────────�
-@@ -282,6 +316,20 @@ pp sleep 3
- n2 ping -W 1 -c 1 192.168.241.1
- n1 wg set wg0 peer "$pub2" persistent-keepalive 0
- 
-+# Test that onion routing works, even when it loops
-+n1 wg set wg0 peer "$pub3" allowed-ips 192.168.242.2/32 endpoint 192.168.241.2:5
-+ip1 addr add 192.168.242.1/24 dev wg0
-+ip2 link add wg1 type wireguard
-+ip2 addr add 192.168.242.2/24 dev wg1
-+n2 wg set wg1 private-key <(echo "$key3") listen-port 5 peer "$pub1" allowed-ips 192.168.242.1/32
-+ip2 link set wg1 up
-+n1 ping -W 1 -c 1 192.168.242.2
-+ip2 link del wg1
-+n1 wg set wg0 peer "$pub3" endpoint 192.168.242.2:5
-+! n1 ping -W 1 -c 1 192.168.242.2 || false # Should not crash kernel
-+n1 wg set wg0 peer "$pub3" remove
-+ip1 addr del 192.168.242.1/24 dev wg0
-+
- # Do a wg-quick(8)-style policy routing for the default route, making sure vethc has a v6 address to tease out bugs.
- ip1 -6 addr add fc00::9/96 dev vethc
- ip1 -6 route add default via fc00::1
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0099-wireguard-send-receive-cond_resched-when-processing-.patch b/target/linux/generic/backport-5.4/080-wireguard-0099-wireguard-send-receive-cond_resched-when-processing-.patch
deleted file mode 100644
index 499b36bc5f..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0099-wireguard-send-receive-cond_resched-when-processing-.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Wed, 6 May 2020 15:33:04 -0600
-Subject: [PATCH] wireguard: send/receive: cond_resched() when processing
- worker ringbuffers
-
-commit 4005f5c3c9d006157ba716594e0d70c88a235c5e upstream.
-
-Users with pathological hardware reported CPU stalls on CONFIG_
-PREEMPT_VOLUNTARY=y, because the ringbuffers would stay full, meaning
-these workers would never terminate. That turned out not to be okay on
-systems without forced preemption, which Sultan observed. This commit
-adds a cond_resched() to the bottom of each loop iteration, so that
-these workers don't hog the core. Note that we don't need this on the
-napi poll worker, since that terminates after its budget is expended.
-
-Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com>
-Reported-by: Wang Jian <larkwang@gmail.com>
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/receive.c | 2 ++
- drivers/net/wireguard/send.c    | 4 ++++
- 2 files changed, 6 insertions(+)
-
---- a/drivers/net/wireguard/receive.c
-+++ b/drivers/net/wireguard/receive.c
-@@ -516,6 +516,8 @@ void wg_packet_decrypt_worker(struct wor
- 				&PACKET_CB(skb)->keypair->receiving)) ?
- 				PACKET_STATE_CRYPTED : PACKET_STATE_DEAD;
- 		wg_queue_enqueue_per_peer_napi(skb, state);
-+		if (need_resched())
-+			cond_resched();
- 	}
- }
- 
---- a/drivers/net/wireguard/send.c
-+++ b/drivers/net/wireguard/send.c
-@@ -281,6 +281,8 @@ void wg_packet_tx_worker(struct work_str
- 
- 		wg_noise_keypair_put(keypair, false);
- 		wg_peer_put(peer);
-+		if (need_resched())
-+			cond_resched();
- 	}
- }
- 
-@@ -304,6 +306,8 @@ void wg_packet_encrypt_worker(struct wor
- 		}
- 		wg_queue_enqueue_per_peer(&PACKET_PEER(first)->tx_queue, first,
- 					  state);
-+		if (need_resched())
-+			cond_resched();
- 	}
- }
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0100-wireguard-selftests-initalize-ipv6-members-to-NULL-t.patch b/target/linux/generic/backport-5.4/080-wireguard-0100-wireguard-selftests-initalize-ipv6-members-to-NULL-t.patch
deleted file mode 100644
index c1124be5ca..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0100-wireguard-selftests-initalize-ipv6-members-to-NULL-t.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Wed, 6 May 2020 15:33:05 -0600
-Subject: [PATCH] wireguard: selftests: initalize ipv6 members to NULL to
- squelch clang warning
-
-commit 4fed818ef54b08d4b29200e416cce65546ad5312 upstream.
-
-Without setting these to NULL, clang complains in certain
-configurations that have CONFIG_IPV6=n:
-
-In file included from drivers/net/wireguard/ratelimiter.c:223:
-drivers/net/wireguard/selftest/ratelimiter.c:173:34: error: variable 'skb6' is uninitialized when used here [-Werror,-Wuninitialized]
-                ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count);
-                                               ^~~~
-drivers/net/wireguard/selftest/ratelimiter.c:123:29: note: initialize the variable 'skb6' to silence this warning
-        struct sk_buff *skb4, *skb6;
-                                   ^
-                                    = NULL
-drivers/net/wireguard/selftest/ratelimiter.c:173:40: error: variable 'hdr6' is uninitialized when used here [-Werror,-Wuninitialized]
-                ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count);
-                                                     ^~~~
-drivers/net/wireguard/selftest/ratelimiter.c:125:22: note: initialize the variable 'hdr6' to silence this warning
-        struct ipv6hdr *hdr6;
-                            ^
-
-We silence this warning by setting the variables to NULL as the warning
-suggests.
-
-Reported-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/selftest/ratelimiter.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireguard/selftest/ratelimiter.c
-+++ b/drivers/net/wireguard/selftest/ratelimiter.c
-@@ -120,9 +120,9 @@ bool __init wg_ratelimiter_selftest(void
- 	enum { TRIALS_BEFORE_GIVING_UP = 5000 };
- 	bool success = false;
- 	int test = 0, trials;
--	struct sk_buff *skb4, *skb6;
-+	struct sk_buff *skb4, *skb6 = NULL;
- 	struct iphdr *hdr4;
--	struct ipv6hdr *hdr6;
-+	struct ipv6hdr *hdr6 = NULL;
- 
- 	if (IS_ENABLED(CONFIG_KASAN) || IS_ENABLED(CONFIG_UBSAN))
- 		return true;
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0101-wireguard-send-receive-use-explicit-unlikely-branch-.patch b/target/linux/generic/backport-5.4/080-wireguard-0101-wireguard-send-receive-use-explicit-unlikely-branch-.patch
deleted file mode 100644
index 900e2f2350..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0101-wireguard-send-receive-use-explicit-unlikely-branch-.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Wed, 6 May 2020 15:33:06 -0600
-Subject: [PATCH] wireguard: send/receive: use explicit unlikely branch instead
- of implicit coalescing
-
-commit 243f2148937adc72bcaaa590d482d599c936efde upstream.
-
-It's very unlikely that send will become true. It's nearly always false
-between 0 and 120 seconds of a session, and in most cases becomes true
-only between 120 and 121 seconds before becoming false again. So,
-unlikely(send) is clearly the right option here.
-
-What happened before was that we had this complex boolean expression
-with multiple likely and unlikely clauses nested. Since this is
-evaluated left-to-right anyway, the whole thing got converted to
-unlikely. So, we can clean this up to better represent what's going on.
-
-The generated code is the same.
-
-Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/receive.c | 13 ++++++-------
- drivers/net/wireguard/send.c    | 15 ++++++---------
- 2 files changed, 12 insertions(+), 16 deletions(-)
-
---- a/drivers/net/wireguard/receive.c
-+++ b/drivers/net/wireguard/receive.c
-@@ -226,21 +226,20 @@ void wg_packet_handshake_receive_worker(
- static void keep_key_fresh(struct wg_peer *peer)
- {
- 	struct noise_keypair *keypair;
--	bool send = false;
-+	bool send;
- 
- 	if (peer->sent_lastminute_handshake)
- 		return;
- 
- 	rcu_read_lock_bh();
- 	keypair = rcu_dereference_bh(peer->keypairs.current_keypair);
--	if (likely(keypair && READ_ONCE(keypair->sending.is_valid)) &&
--	    keypair->i_am_the_initiator &&
--	    unlikely(wg_birthdate_has_expired(keypair->sending.birthdate,
--			REJECT_AFTER_TIME - KEEPALIVE_TIMEOUT - REKEY_TIMEOUT)))
--		send = true;
-+	send = keypair && READ_ONCE(keypair->sending.is_valid) &&
-+	       keypair->i_am_the_initiator &&
-+	       wg_birthdate_has_expired(keypair->sending.birthdate,
-+			REJECT_AFTER_TIME - KEEPALIVE_TIMEOUT - REKEY_TIMEOUT);
- 	rcu_read_unlock_bh();
- 
--	if (send) {
-+	if (unlikely(send)) {
- 		peer->sent_lastminute_handshake = true;
- 		wg_packet_send_queued_handshake_initiation(peer, false);
- 	}
---- a/drivers/net/wireguard/send.c
-+++ b/drivers/net/wireguard/send.c
-@@ -124,20 +124,17 @@ void wg_packet_send_handshake_cookie(str
- static void keep_key_fresh(struct wg_peer *peer)
- {
- 	struct noise_keypair *keypair;
--	bool send = false;
-+	bool send;
- 
- 	rcu_read_lock_bh();
- 	keypair = rcu_dereference_bh(peer->keypairs.current_keypair);
--	if (likely(keypair && READ_ONCE(keypair->sending.is_valid)) &&
--	    (unlikely(atomic64_read(&keypair->sending.counter.counter) >
--		      REKEY_AFTER_MESSAGES) ||
--	     (keypair->i_am_the_initiator &&
--	      unlikely(wg_birthdate_has_expired(keypair->sending.birthdate,
--						REKEY_AFTER_TIME)))))
--		send = true;
-+	send = keypair && READ_ONCE(keypair->sending.is_valid) &&
-+	       (atomic64_read(&keypair->sending.counter.counter) > REKEY_AFTER_MESSAGES ||
-+		(keypair->i_am_the_initiator &&
-+		 wg_birthdate_has_expired(keypair->sending.birthdate, REKEY_AFTER_TIME)));
- 	rcu_read_unlock_bh();
- 
--	if (send)
-+	if (unlikely(send))
- 		wg_packet_send_queued_handshake_initiation(peer, false);
- }
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0102-wireguard-selftests-use-newer-iproute2-for-gcc-10.patch b/target/linux/generic/backport-5.4/080-wireguard-0102-wireguard-selftests-use-newer-iproute2-for-gcc-10.patch
deleted file mode 100644
index d4efe37a49..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0102-wireguard-selftests-use-newer-iproute2-for-gcc-10.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Tue, 19 May 2020 22:49:27 -0600
-Subject: [PATCH] wireguard: selftests: use newer iproute2 for gcc-10
-
-commit ee3c1aa3f34b7842c1557cfe5d8c3f7b8c692de8 upstream.
-
-gcc-10 switched to defaulting to -fno-common, which broke iproute2-5.4.
-This was fixed in iproute-5.6, so switch to that. Because we're after a
-stable testing surface, we generally don't like to bump these
-unnecessarily, but in this case, being able to actually build is a basic
-necessity.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- tools/testing/selftests/wireguard/qemu/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/tools/testing/selftests/wireguard/qemu/Makefile
-+++ b/tools/testing/selftests/wireguard/qemu/Makefile
-@@ -44,7 +44,7 @@ endef
- $(eval $(call tar_download,MUSL,musl,1.1.24,.tar.gz,https://www.musl-libc.org/releases/,1370c9a812b2cf2a7d92802510cca0058cc37e66a7bedd70051f0a34015022a3))
- $(eval $(call tar_download,IPERF,iperf,3.7,.tar.gz,https://downloads.es.net/pub/iperf/,d846040224317caf2f75c843d309a950a7db23f9b44b94688ccbe557d6d1710c))
- $(eval $(call tar_download,BASH,bash,5.0,.tar.gz,https://ftp.gnu.org/gnu/bash/,b4a80f2ac66170b2913efbfb9f2594f1f76c7b1afd11f799e22035d63077fb4d))
--$(eval $(call tar_download,IPROUTE2,iproute2,5.4.0,.tar.xz,https://www.kernel.org/pub/linux/utils/net/iproute2/,fe97aa60a0d4c5ac830be18937e18dc3400ca713a33a89ad896ff1e3d46086ae))
-+$(eval $(call tar_download,IPROUTE2,iproute2,5.6.0,.tar.xz,https://www.kernel.org/pub/linux/utils/net/iproute2/,1b5b0e25ce6e23da7526ea1da044e814ad85ba761b10dd29c2b027c056b04692))
- $(eval $(call tar_download,IPTABLES,iptables,1.8.4,.tar.bz2,https://www.netfilter.org/projects/iptables/files/,993a3a5490a544c2cbf2ef15cf7e7ed21af1845baf228318d5c36ef8827e157c))
- $(eval $(call tar_download,NMAP,nmap,7.80,.tar.bz2,https://nmap.org/dist/,fcfa5a0e42099e12e4bf7a68ebe6fde05553383a682e816a7ec9256ab4773faa))
- $(eval $(call tar_download,IPUTILS,iputils,s20190709,.tar.gz,https://github.com/iputils/iputils/archive/s20190709.tar.gz/#,a15720dd741d7538dd2645f9f516d193636ae4300ff7dbc8bfca757bf166490a))
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0103-wireguard-noise-read-preshared-key-while-taking-lock.patch b/target/linux/generic/backport-5.4/080-wireguard-0103-wireguard-noise-read-preshared-key-while-taking-lock.patch
deleted file mode 100644
index 2dac4b7064..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0103-wireguard-noise-read-preshared-key-while-taking-lock.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Tue, 19 May 2020 22:49:28 -0600
-Subject: [PATCH] wireguard: noise: read preshared key while taking lock
-
-commit bc67d371256f5c47d824e2eec51e46c8d62d022e upstream.
-
-Prior we read the preshared key after dropping the handshake lock, which
-isn't an actual crypto issue if it races, but it's still not quite
-correct. So copy that part of the state into a temporary like we do with
-the rest of the handshake state variables. Then we can release the lock,
-operate on the temporary, and zero it out at the end of the function. In
-performance tests, the impact of this was entirely unnoticable, probably
-because those bytes are coming from the same cacheline as other things
-that are being copied out in the same manner.
-
-Reported-by: Matt Dunwoodie <ncon@noconroy.net>
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/noise.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireguard/noise.c
-+++ b/drivers/net/wireguard/noise.c
-@@ -715,6 +715,7 @@ wg_noise_handshake_consume_response(stru
- 	u8 e[NOISE_PUBLIC_KEY_LEN];
- 	u8 ephemeral_private[NOISE_PUBLIC_KEY_LEN];
- 	u8 static_private[NOISE_PUBLIC_KEY_LEN];
-+	u8 preshared_key[NOISE_SYMMETRIC_KEY_LEN];
- 
- 	down_read(&wg->static_identity.lock);
- 
-@@ -733,6 +734,8 @@ wg_noise_handshake_consume_response(stru
- 	memcpy(chaining_key, handshake->chaining_key, NOISE_HASH_LEN);
- 	memcpy(ephemeral_private, handshake->ephemeral_private,
- 	       NOISE_PUBLIC_KEY_LEN);
-+	memcpy(preshared_key, handshake->preshared_key,
-+	       NOISE_SYMMETRIC_KEY_LEN);
- 	up_read(&handshake->lock);
- 
- 	if (state != HANDSHAKE_CREATED_INITIATION)
-@@ -750,7 +753,7 @@ wg_noise_handshake_consume_response(stru
- 		goto fail;
- 
- 	/* psk */
--	mix_psk(chaining_key, hash, key, handshake->preshared_key);
-+	mix_psk(chaining_key, hash, key, preshared_key);
- 
- 	/* {} */
- 	if (!message_decrypt(NULL, src->encrypted_nothing,
-@@ -783,6 +786,7 @@ out:
- 	memzero_explicit(chaining_key, NOISE_HASH_LEN);
- 	memzero_explicit(ephemeral_private, NOISE_PUBLIC_KEY_LEN);
- 	memzero_explicit(static_private, NOISE_PUBLIC_KEY_LEN);
-+	memzero_explicit(preshared_key, NOISE_SYMMETRIC_KEY_LEN);
- 	up_read(&wg->static_identity.lock);
- 	return ret_peer;
- }
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0104-wireguard-queueing-preserve-flow-hash-across-packet-.patch b/target/linux/generic/backport-5.4/080-wireguard-0104-wireguard-queueing-preserve-flow-hash-across-packet-.patch
deleted file mode 100644
index 31deadbfc1..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0104-wireguard-queueing-preserve-flow-hash-across-packet-.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Tue, 19 May 2020 22:49:29 -0600
-Subject: [PATCH] wireguard: queueing: preserve flow hash across packet
- scrubbing
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-commit c78a0b4a78839d572d8a80f6a62221c0d7843135 upstream.
-
-It's important that we clear most header fields during encapsulation and
-decapsulation, because the packet is substantially changed, and we don't
-want any info leak or logic bug due to an accidental correlation. But,
-for encapsulation, it's wrong to clear skb->hash, since it's used by
-fq_codel and flow dissection in general. Without it, classification does
-not proceed as usual. This change might make it easier to estimate the
-number of innerflows by examining clustering of out of order packets,
-but this shouldn't open up anything that can't already be inferred
-otherwise (e.g. syn packet size inference), and fq_codel can be disabled
-anyway.
-
-Furthermore, it might be the case that the hash isn't used or queried at
-all until after wireguard transmits the encrypted UDP packet, which
-means skb->hash might still be zero at this point, and thus no hash
-taken over the inner packet data. In order to address this situation, we
-force a calculation of skb->hash before encrypting packet data.
-
-Of course this means that fq_codel might transmit packets slightly more
-out of order than usual. Toke did some testing on beefy machines with
-high quantities of parallel flows and found that increasing the
-reply-attack counter to 8192 takes care of the most pathological cases
-pretty well.
-
-Reported-by: Dave Taht <dave.taht@gmail.com>
-Reviewed-and-tested-by: Toke Høiland-Jørgensen <toke@toke.dk>
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/messages.h |  2 +-
- drivers/net/wireguard/queueing.h | 10 +++++++++-
- drivers/net/wireguard/receive.c  |  2 +-
- drivers/net/wireguard/send.c     |  7 ++++++-
- 4 files changed, 17 insertions(+), 4 deletions(-)
-
---- a/drivers/net/wireguard/messages.h
-+++ b/drivers/net/wireguard/messages.h
-@@ -32,7 +32,7 @@ enum cookie_values {
- };
- 
- enum counter_values {
--	COUNTER_BITS_TOTAL = 2048,
-+	COUNTER_BITS_TOTAL = 8192,
- 	COUNTER_REDUNDANT_BITS = BITS_PER_LONG,
- 	COUNTER_WINDOW_SIZE = COUNTER_BITS_TOTAL - COUNTER_REDUNDANT_BITS
- };
---- a/drivers/net/wireguard/queueing.h
-+++ b/drivers/net/wireguard/queueing.h
-@@ -87,12 +87,20 @@ static inline bool wg_check_packet_proto
- 	return real_protocol && skb->protocol == real_protocol;
- }
- 
--static inline void wg_reset_packet(struct sk_buff *skb)
-+static inline void wg_reset_packet(struct sk_buff *skb, bool encapsulating)
- {
-+	u8 l4_hash = skb->l4_hash;
-+	u8 sw_hash = skb->sw_hash;
-+	u32 hash = skb->hash;
- 	skb_scrub_packet(skb, true);
- 	memset(&skb->headers_start, 0,
- 	       offsetof(struct sk_buff, headers_end) -
- 		       offsetof(struct sk_buff, headers_start));
-+	if (encapsulating) {
-+		skb->l4_hash = l4_hash;
-+		skb->sw_hash = sw_hash;
-+		skb->hash = hash;
-+	}
- 	skb->queue_mapping = 0;
- 	skb->nohdr = 0;
- 	skb->peeked = 0;
---- a/drivers/net/wireguard/receive.c
-+++ b/drivers/net/wireguard/receive.c
-@@ -484,7 +484,7 @@ int wg_packet_rx_poll(struct napi_struct
- 		if (unlikely(wg_socket_endpoint_from_skb(&endpoint, skb)))
- 			goto next;
- 
--		wg_reset_packet(skb);
-+		wg_reset_packet(skb, false);
- 		wg_packet_consume_data_done(peer, skb, &endpoint);
- 		free = false;
- 
---- a/drivers/net/wireguard/send.c
-+++ b/drivers/net/wireguard/send.c
-@@ -167,6 +167,11 @@ static bool encrypt_packet(struct sk_buf
- 	struct sk_buff *trailer;
- 	int num_frags;
- 
-+	/* Force hash calculation before encryption so that flow analysis is
-+	 * consistent over the inner packet.
-+	 */
-+	skb_get_hash(skb);
-+
- 	/* Calculate lengths. */
- 	padding_len = calculate_skb_padding(skb);
- 	trailer_len = padding_len + noise_encrypted_len(0);
-@@ -295,7 +300,7 @@ void wg_packet_encrypt_worker(struct wor
- 		skb_list_walk_safe(first, skb, next) {
- 			if (likely(encrypt_packet(skb,
- 					PACKET_CB(first)->keypair))) {
--				wg_reset_packet(skb);
-+				wg_reset_packet(skb, true);
- 			} else {
- 				state = PACKET_STATE_DEAD;
- 				break;
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0105-wireguard-noise-separate-receive-counter-from-send-c.patch b/target/linux/generic/backport-5.4/080-wireguard-0105-wireguard-noise-separate-receive-counter-from-send-c.patch
deleted file mode 100644
index 87d38d36fe..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0105-wireguard-noise-separate-receive-counter-from-send-c.patch
+++ /dev/null
@@ -1,330 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Tue, 19 May 2020 22:49:30 -0600
-Subject: [PATCH] wireguard: noise: separate receive counter from send counter
-
-commit a9e90d9931f3a474f04bab782ccd9d77904941e9 upstream.
-
-In "wireguard: queueing: preserve flow hash across packet scrubbing", we
-were required to slightly increase the size of the receive replay
-counter to something still fairly small, but an increase nonetheless.
-It turns out that we can recoup some of the additional memory overhead
-by splitting up the prior union type into two distinct types. Before, we
-used the same "noise_counter" union for both sending and receiving, with
-sending just using a simple atomic64_t, while receiving used the full
-replay counter checker. This meant that most of the memory being
-allocated for the sending counter was being wasted. Since the old
-"noise_counter" type increased in size in the prior commit, now is a
-good time to split up that union type into a distinct "noise_replay_
-counter" for receiving and a boring atomic64_t for sending, each using
-neither more nor less memory than required.
-
-Also, since sometimes the replay counter is accessed without
-necessitating additional accesses to the bitmap, we can reduce cache
-misses by hoisting the always-necessary lock above the bitmap in the
-struct layout. We also change a "noise_replay_counter" stack allocation
-to kmalloc in a -DDEBUG selftest so that KASAN doesn't trigger a stack
-frame warning.
-
-All and all, removing a bit of abstraction in this commit makes the code
-simpler and smaller, in addition to the motivating memory usage
-recuperation. For example, passing around raw "noise_symmetric_key"
-structs is something that really only makes sense within noise.c, in the
-one place where the sending and receiving keys can safely be thought of
-as the same type of object; subsequent to that, it's important that we
-uniformly access these through keypair->{sending,receiving}, where their
-distinct roles are always made explicit. So this patch allows us to draw
-that distinction clearly as well.
-
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/noise.c            | 16 +++------
- drivers/net/wireguard/noise.h            | 14 ++++----
- drivers/net/wireguard/receive.c          | 42 ++++++++++++------------
- drivers/net/wireguard/selftest/counter.c | 17 +++++++---
- drivers/net/wireguard/send.c             | 12 +++----
- 5 files changed, 48 insertions(+), 53 deletions(-)
-
---- a/drivers/net/wireguard/noise.c
-+++ b/drivers/net/wireguard/noise.c
-@@ -104,6 +104,7 @@ static struct noise_keypair *keypair_cre
- 
- 	if (unlikely(!keypair))
- 		return NULL;
-+	spin_lock_init(&keypair->receiving_counter.lock);
- 	keypair->internal_id = atomic64_inc_return(&keypair_counter);
- 	keypair->entry.type = INDEX_HASHTABLE_KEYPAIR;
- 	keypair->entry.peer = peer;
-@@ -358,25 +359,16 @@ out:
- 	memzero_explicit(output, BLAKE2S_HASH_SIZE + 1);
- }
- 
--static void symmetric_key_init(struct noise_symmetric_key *key)
--{
--	spin_lock_init(&key->counter.receive.lock);
--	atomic64_set(&key->counter.counter, 0);
--	memset(key->counter.receive.backtrack, 0,
--	       sizeof(key->counter.receive.backtrack));
--	key->birthdate = ktime_get_coarse_boottime_ns();
--	key->is_valid = true;
--}
--
- static void derive_keys(struct noise_symmetric_key *first_dst,
- 			struct noise_symmetric_key *second_dst,
- 			const u8 chaining_key[NOISE_HASH_LEN])
- {
-+	u64 birthdate = ktime_get_coarse_boottime_ns();
- 	kdf(first_dst->key, second_dst->key, NULL, NULL,
- 	    NOISE_SYMMETRIC_KEY_LEN, NOISE_SYMMETRIC_KEY_LEN, 0, 0,
- 	    chaining_key);
--	symmetric_key_init(first_dst);
--	symmetric_key_init(second_dst);
-+	first_dst->birthdate = second_dst->birthdate = birthdate;
-+	first_dst->is_valid = second_dst->is_valid = true;
- }
- 
- static bool __must_check mix_dh(u8 chaining_key[NOISE_HASH_LEN],
---- a/drivers/net/wireguard/noise.h
-+++ b/drivers/net/wireguard/noise.h
-@@ -15,18 +15,14 @@
- #include <linux/mutex.h>
- #include <linux/kref.h>
- 
--union noise_counter {
--	struct {
--		u64 counter;
--		unsigned long backtrack[COUNTER_BITS_TOTAL / BITS_PER_LONG];
--		spinlock_t lock;
--	} receive;
--	atomic64_t counter;
-+struct noise_replay_counter {
-+	u64 counter;
-+	spinlock_t lock;
-+	unsigned long backtrack[COUNTER_BITS_TOTAL / BITS_PER_LONG];
- };
- 
- struct noise_symmetric_key {
- 	u8 key[NOISE_SYMMETRIC_KEY_LEN];
--	union noise_counter counter;
- 	u64 birthdate;
- 	bool is_valid;
- };
-@@ -34,7 +30,9 @@ struct noise_symmetric_key {
- struct noise_keypair {
- 	struct index_hashtable_entry entry;
- 	struct noise_symmetric_key sending;
-+	atomic64_t sending_counter;
- 	struct noise_symmetric_key receiving;
-+	struct noise_replay_counter receiving_counter;
- 	__le32 remote_index;
- 	bool i_am_the_initiator;
- 	struct kref refcount;
---- a/drivers/net/wireguard/receive.c
-+++ b/drivers/net/wireguard/receive.c
-@@ -245,20 +245,20 @@ static void keep_key_fresh(struct wg_pee
- 	}
- }
- 
--static bool decrypt_packet(struct sk_buff *skb, struct noise_symmetric_key *key)
-+static bool decrypt_packet(struct sk_buff *skb, struct noise_keypair *keypair)
- {
- 	struct scatterlist sg[MAX_SKB_FRAGS + 8];
- 	struct sk_buff *trailer;
- 	unsigned int offset;
- 	int num_frags;
- 
--	if (unlikely(!key))
-+	if (unlikely(!keypair))
- 		return false;
- 
--	if (unlikely(!READ_ONCE(key->is_valid) ||
--		  wg_birthdate_has_expired(key->birthdate, REJECT_AFTER_TIME) ||
--		  key->counter.receive.counter >= REJECT_AFTER_MESSAGES)) {
--		WRITE_ONCE(key->is_valid, false);
-+	if (unlikely(!READ_ONCE(keypair->receiving.is_valid) ||
-+		  wg_birthdate_has_expired(keypair->receiving.birthdate, REJECT_AFTER_TIME) ||
-+		  keypair->receiving_counter.counter >= REJECT_AFTER_MESSAGES)) {
-+		WRITE_ONCE(keypair->receiving.is_valid, false);
- 		return false;
- 	}
- 
-@@ -283,7 +283,7 @@ static bool decrypt_packet(struct sk_buf
- 
- 	if (!chacha20poly1305_decrypt_sg_inplace(sg, skb->len, NULL, 0,
- 					         PACKET_CB(skb)->nonce,
--						 key->key))
-+						 keypair->receiving.key))
- 		return false;
- 
- 	/* Another ugly situation of pushing and pulling the header so as to
-@@ -298,41 +298,41 @@ static bool decrypt_packet(struct sk_buf
- }
- 
- /* This is RFC6479, a replay detection bitmap algorithm that avoids bitshifts */
--static bool counter_validate(union noise_counter *counter, u64 their_counter)
-+static bool counter_validate(struct noise_replay_counter *counter, u64 their_counter)
- {
- 	unsigned long index, index_current, top, i;
- 	bool ret = false;
- 
--	spin_lock_bh(&counter->receive.lock);
-+	spin_lock_bh(&counter->lock);
- 
--	if (unlikely(counter->receive.counter >= REJECT_AFTER_MESSAGES + 1 ||
-+	if (unlikely(counter->counter >= REJECT_AFTER_MESSAGES + 1 ||
- 		     their_counter >= REJECT_AFTER_MESSAGES))
- 		goto out;
- 
- 	++their_counter;
- 
- 	if (unlikely((COUNTER_WINDOW_SIZE + their_counter) <
--		     counter->receive.counter))
-+		     counter->counter))
- 		goto out;
- 
- 	index = their_counter >> ilog2(BITS_PER_LONG);
- 
--	if (likely(their_counter > counter->receive.counter)) {
--		index_current = counter->receive.counter >> ilog2(BITS_PER_LONG);
-+	if (likely(their_counter > counter->counter)) {
-+		index_current = counter->counter >> ilog2(BITS_PER_LONG);
- 		top = min_t(unsigned long, index - index_current,
- 			    COUNTER_BITS_TOTAL / BITS_PER_LONG);
- 		for (i = 1; i <= top; ++i)
--			counter->receive.backtrack[(i + index_current) &
-+			counter->backtrack[(i + index_current) &
- 				((COUNTER_BITS_TOTAL / BITS_PER_LONG) - 1)] = 0;
--		counter->receive.counter = their_counter;
-+		counter->counter = their_counter;
- 	}
- 
- 	index &= (COUNTER_BITS_TOTAL / BITS_PER_LONG) - 1;
- 	ret = !test_and_set_bit(their_counter & (BITS_PER_LONG - 1),
--				&counter->receive.backtrack[index]);
-+				&counter->backtrack[index]);
- 
- out:
--	spin_unlock_bh(&counter->receive.lock);
-+	spin_unlock_bh(&counter->lock);
- 	return ret;
- }
- 
-@@ -472,12 +472,12 @@ int wg_packet_rx_poll(struct napi_struct
- 		if (unlikely(state != PACKET_STATE_CRYPTED))
- 			goto next;
- 
--		if (unlikely(!counter_validate(&keypair->receiving.counter,
-+		if (unlikely(!counter_validate(&keypair->receiving_counter,
- 					       PACKET_CB(skb)->nonce))) {
- 			net_dbg_ratelimited("%s: Packet has invalid nonce %llu (max %llu)\n",
- 					    peer->device->dev->name,
- 					    PACKET_CB(skb)->nonce,
--					    keypair->receiving.counter.receive.counter);
-+					    keypair->receiving_counter.counter);
- 			goto next;
- 		}
- 
-@@ -511,8 +511,8 @@ void wg_packet_decrypt_worker(struct wor
- 	struct sk_buff *skb;
- 
- 	while ((skb = ptr_ring_consume_bh(&queue->ring)) != NULL) {
--		enum packet_state state = likely(decrypt_packet(skb,
--				&PACKET_CB(skb)->keypair->receiving)) ?
-+		enum packet_state state =
-+			likely(decrypt_packet(skb, PACKET_CB(skb)->keypair)) ?
- 				PACKET_STATE_CRYPTED : PACKET_STATE_DEAD;
- 		wg_queue_enqueue_per_peer_napi(skb, state);
- 		if (need_resched())
---- a/drivers/net/wireguard/selftest/counter.c
-+++ b/drivers/net/wireguard/selftest/counter.c
-@@ -6,18 +6,24 @@
- #ifdef DEBUG
- bool __init wg_packet_counter_selftest(void)
- {
-+	struct noise_replay_counter *counter;
- 	unsigned int test_num = 0, i;
--	union noise_counter counter;
- 	bool success = true;
- 
--#define T_INIT do {                                               \
--		memset(&counter, 0, sizeof(union noise_counter)); \
--		spin_lock_init(&counter.receive.lock);            \
-+	counter = kmalloc(sizeof(*counter), GFP_KERNEL);
-+	if (unlikely(!counter)) {
-+		pr_err("nonce counter self-test malloc: FAIL\n");
-+		return false;
-+	}
-+
-+#define T_INIT do {                                    \
-+		memset(counter, 0, sizeof(*counter));  \
-+		spin_lock_init(&counter->lock);        \
- 	} while (0)
- #define T_LIM (COUNTER_WINDOW_SIZE + 1)
- #define T(n, v) do {                                                  \
- 		++test_num;                                           \
--		if (counter_validate(&counter, n) != (v)) {           \
-+		if (counter_validate(counter, n) != (v)) {            \
- 			pr_err("nonce counter self-test %u: FAIL\n",  \
- 			       test_num);                             \
- 			success = false;                              \
-@@ -99,6 +105,7 @@ bool __init wg_packet_counter_selftest(v
- 
- 	if (success)
- 		pr_info("nonce counter self-tests: pass\n");
-+	kfree(counter);
- 	return success;
- }
- #endif
---- a/drivers/net/wireguard/send.c
-+++ b/drivers/net/wireguard/send.c
-@@ -129,7 +129,7 @@ static void keep_key_fresh(struct wg_pee
- 	rcu_read_lock_bh();
- 	keypair = rcu_dereference_bh(peer->keypairs.current_keypair);
- 	send = keypair && READ_ONCE(keypair->sending.is_valid) &&
--	       (atomic64_read(&keypair->sending.counter.counter) > REKEY_AFTER_MESSAGES ||
-+	       (atomic64_read(&keypair->sending_counter) > REKEY_AFTER_MESSAGES ||
- 		(keypair->i_am_the_initiator &&
- 		 wg_birthdate_has_expired(keypair->sending.birthdate, REKEY_AFTER_TIME)));
- 	rcu_read_unlock_bh();
-@@ -349,7 +349,6 @@ void wg_packet_purge_staged_packets(stru
- 
- void wg_packet_send_staged_packets(struct wg_peer *peer)
- {
--	struct noise_symmetric_key *key;
- 	struct noise_keypair *keypair;
- 	struct sk_buff_head packets;
- 	struct sk_buff *skb;
-@@ -369,10 +368,9 @@ void wg_packet_send_staged_packets(struc
- 	rcu_read_unlock_bh();
- 	if (unlikely(!keypair))
- 		goto out_nokey;
--	key = &keypair->sending;
--	if (unlikely(!READ_ONCE(key->is_valid)))
-+	if (unlikely(!READ_ONCE(keypair->sending.is_valid)))
- 		goto out_nokey;
--	if (unlikely(wg_birthdate_has_expired(key->birthdate,
-+	if (unlikely(wg_birthdate_has_expired(keypair->sending.birthdate,
- 					      REJECT_AFTER_TIME)))
- 		goto out_invalid;
- 
-@@ -387,7 +385,7 @@ void wg_packet_send_staged_packets(struc
- 		 */
- 		PACKET_CB(skb)->ds = ip_tunnel_ecn_encap(0, ip_hdr(skb), skb);
- 		PACKET_CB(skb)->nonce =
--				atomic64_inc_return(&key->counter.counter) - 1;
-+				atomic64_inc_return(&keypair->sending_counter) - 1;
- 		if (unlikely(PACKET_CB(skb)->nonce >= REJECT_AFTER_MESSAGES))
- 			goto out_invalid;
- 	}
-@@ -399,7 +397,7 @@ void wg_packet_send_staged_packets(struc
- 	return;
- 
- out_invalid:
--	WRITE_ONCE(key->is_valid, false);
-+	WRITE_ONCE(keypair->sending.is_valid, false);
- out_nokey:
- 	wg_noise_keypair_put(keypair, false);
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0106-wireguard-noise-do-not-assign-initiation-time-in-if-.patch b/target/linux/generic/backport-5.4/080-wireguard-0106-wireguard-noise-do-not-assign-initiation-time-in-if-.patch
deleted file mode 100644
index a53c764708..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0106-wireguard-noise-do-not-assign-initiation-time-in-if-.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Frank Werner-Krippendorf <mail@hb9fxq.ch>
-Date: Tue, 23 Jun 2020 03:59:44 -0600
-Subject: [PATCH] wireguard: noise: do not assign initiation time in if
- condition
-
-commit 558b353c9c2a717509f291c066c6bd8f5f5e21be upstream.
-
-Fixes an error condition reported by checkpatch.pl which caused by
-assigning a variable in an if condition in wg_noise_handshake_consume_
-initiation().
-
-Signed-off-by: Frank Werner-Krippendorf <mail@hb9fxq.ch>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/noise.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireguard/noise.c
-+++ b/drivers/net/wireguard/noise.c
-@@ -617,8 +617,8 @@ wg_noise_handshake_consume_initiation(st
- 	memcpy(handshake->hash, hash, NOISE_HASH_LEN);
- 	memcpy(handshake->chaining_key, chaining_key, NOISE_HASH_LEN);
- 	handshake->remote_index = src->sender_index;
--	if ((s64)(handshake->last_initiation_consumption -
--	    (initiation_consumption = ktime_get_coarse_boottime_ns())) < 0)
-+	initiation_consumption = ktime_get_coarse_boottime_ns();
-+	if ((s64)(handshake->last_initiation_consumption - initiation_consumption) < 0)
- 		handshake->last_initiation_consumption = initiation_consumption;
- 	handshake->state = HANDSHAKE_CONSUMED_INITIATION;
- 	up_write(&handshake->lock);
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0107-wireguard-device-avoid-circular-netns-references.patch b/target/linux/generic/backport-5.4/080-wireguard-0107-wireguard-device-avoid-circular-netns-references.patch
deleted file mode 100644
index 013023a3e2..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0107-wireguard-device-avoid-circular-netns-references.patch
+++ /dev/null
@@ -1,296 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Tue, 23 Jun 2020 03:59:45 -0600
-Subject: [PATCH] wireguard: device: avoid circular netns references
-
-commit 900575aa33a3eaaef802b31de187a85c4a4b4bd0 upstream.
-
-Before, we took a reference to the creating netns if the new netns was
-different. This caused issues with circular references, with two
-wireguard interfaces swapping namespaces. The solution is to rather not
-take any extra references at all, but instead simply invalidate the
-creating netns pointer when that netns is deleted.
-
-In order to prevent this from happening again, this commit improves the
-rough object leak tracking by allowing it to account for created and
-destroyed interfaces, aside from just peers and keys. That then makes it
-possible to check for the object leak when having two interfaces take a
-reference to each others' namespaces.
-
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/device.c             | 58 ++++++++++------------
- drivers/net/wireguard/device.h             |  3 +-
- drivers/net/wireguard/netlink.c            | 14 ++++--
- drivers/net/wireguard/socket.c             | 25 +++++++---
- tools/testing/selftests/wireguard/netns.sh | 13 ++++-
- 5 files changed, 67 insertions(+), 46 deletions(-)
-
---- a/drivers/net/wireguard/device.c
-+++ b/drivers/net/wireguard/device.c
-@@ -45,17 +45,18 @@ static int wg_open(struct net_device *de
- 	if (dev_v6)
- 		dev_v6->cnf.addr_gen_mode = IN6_ADDR_GEN_MODE_NONE;
- 
-+	mutex_lock(&wg->device_update_lock);
- 	ret = wg_socket_init(wg, wg->incoming_port);
- 	if (ret < 0)
--		return ret;
--	mutex_lock(&wg->device_update_lock);
-+		goto out;
- 	list_for_each_entry(peer, &wg->peer_list, peer_list) {
- 		wg_packet_send_staged_packets(peer);
- 		if (peer->persistent_keepalive_interval)
- 			wg_packet_send_keepalive(peer);
- 	}
-+out:
- 	mutex_unlock(&wg->device_update_lock);
--	return 0;
-+	return ret;
- }
- 
- #ifdef CONFIG_PM_SLEEP
-@@ -225,6 +226,7 @@ static void wg_destruct(struct net_devic
- 	list_del(&wg->device_list);
- 	rtnl_unlock();
- 	mutex_lock(&wg->device_update_lock);
-+	rcu_assign_pointer(wg->creating_net, NULL);
- 	wg->incoming_port = 0;
- 	wg_socket_reinit(wg, NULL, NULL);
- 	/* The final references are cleared in the below calls to destroy_workqueue. */
-@@ -240,13 +242,11 @@ static void wg_destruct(struct net_devic
- 	skb_queue_purge(&wg->incoming_handshakes);
- 	free_percpu(dev->tstats);
- 	free_percpu(wg->incoming_handshakes_worker);
--	if (wg->have_creating_net_ref)
--		put_net(wg->creating_net);
- 	kvfree(wg->index_hashtable);
- 	kvfree(wg->peer_hashtable);
- 	mutex_unlock(&wg->device_update_lock);
- 
--	pr_debug("%s: Interface deleted\n", dev->name);
-+	pr_debug("%s: Interface destroyed\n", dev->name);
- 	free_netdev(dev);
- }
- 
-@@ -292,7 +292,7 @@ static int wg_newlink(struct net *src_ne
- 	struct wg_device *wg = netdev_priv(dev);
- 	int ret = -ENOMEM;
- 
--	wg->creating_net = src_net;
-+	rcu_assign_pointer(wg->creating_net, src_net);
- 	init_rwsem(&wg->static_identity.lock);
- 	mutex_init(&wg->socket_update_lock);
- 	mutex_init(&wg->device_update_lock);
-@@ -393,30 +393,26 @@ static struct rtnl_link_ops link_ops __r
- 	.newlink		= wg_newlink,
- };
- 
--static int wg_netdevice_notification(struct notifier_block *nb,
--				     unsigned long action, void *data)
-+static void wg_netns_pre_exit(struct net *net)
- {
--	struct net_device *dev = ((struct netdev_notifier_info *)data)->dev;
--	struct wg_device *wg = netdev_priv(dev);
--
--	ASSERT_RTNL();
--
--	if (action != NETDEV_REGISTER || dev->netdev_ops != &netdev_ops)
--		return 0;
-+	struct wg_device *wg;
- 
--	if (dev_net(dev) == wg->creating_net && wg->have_creating_net_ref) {
--		put_net(wg->creating_net);
--		wg->have_creating_net_ref = false;
--	} else if (dev_net(dev) != wg->creating_net &&
--		   !wg->have_creating_net_ref) {
--		wg->have_creating_net_ref = true;
--		get_net(wg->creating_net);
-+	rtnl_lock();
-+	list_for_each_entry(wg, &device_list, device_list) {
-+		if (rcu_access_pointer(wg->creating_net) == net) {
-+			pr_debug("%s: Creating namespace exiting\n", wg->dev->name);
-+			netif_carrier_off(wg->dev);
-+			mutex_lock(&wg->device_update_lock);
-+			rcu_assign_pointer(wg->creating_net, NULL);
-+			wg_socket_reinit(wg, NULL, NULL);
-+			mutex_unlock(&wg->device_update_lock);
-+		}
- 	}
--	return 0;
-+	rtnl_unlock();
- }
- 
--static struct notifier_block netdevice_notifier = {
--	.notifier_call = wg_netdevice_notification
-+static struct pernet_operations pernet_ops = {
-+	.pre_exit = wg_netns_pre_exit
- };
- 
- int __init wg_device_init(void)
-@@ -429,18 +425,18 @@ int __init wg_device_init(void)
- 		return ret;
- #endif
- 
--	ret = register_netdevice_notifier(&netdevice_notifier);
-+	ret = register_pernet_device(&pernet_ops);
- 	if (ret)
- 		goto error_pm;
- 
- 	ret = rtnl_link_register(&link_ops);
- 	if (ret)
--		goto error_netdevice;
-+		goto error_pernet;
- 
- 	return 0;
- 
--error_netdevice:
--	unregister_netdevice_notifier(&netdevice_notifier);
-+error_pernet:
-+	unregister_pernet_device(&pernet_ops);
- error_pm:
- #ifdef CONFIG_PM_SLEEP
- 	unregister_pm_notifier(&pm_notifier);
-@@ -451,7 +447,7 @@ error_pm:
- void wg_device_uninit(void)
- {
- 	rtnl_link_unregister(&link_ops);
--	unregister_netdevice_notifier(&netdevice_notifier);
-+	unregister_pernet_device(&pernet_ops);
- #ifdef CONFIG_PM_SLEEP
- 	unregister_pm_notifier(&pm_notifier);
- #endif
---- a/drivers/net/wireguard/device.h
-+++ b/drivers/net/wireguard/device.h
-@@ -40,7 +40,7 @@ struct wg_device {
- 	struct net_device *dev;
- 	struct crypt_queue encrypt_queue, decrypt_queue;
- 	struct sock __rcu *sock4, *sock6;
--	struct net *creating_net;
-+	struct net __rcu *creating_net;
- 	struct noise_static_identity static_identity;
- 	struct workqueue_struct *handshake_receive_wq, *handshake_send_wq;
- 	struct workqueue_struct *packet_crypt_wq;
-@@ -56,7 +56,6 @@ struct wg_device {
- 	unsigned int num_peers, device_update_gen;
- 	u32 fwmark;
- 	u16 incoming_port;
--	bool have_creating_net_ref;
- };
- 
- int wg_device_init(void);
---- a/drivers/net/wireguard/netlink.c
-+++ b/drivers/net/wireguard/netlink.c
-@@ -517,11 +517,15 @@ static int wg_set_device(struct sk_buff
- 	if (flags & ~__WGDEVICE_F_ALL)
- 		goto out;
- 
--	ret = -EPERM;
--	if ((info->attrs[WGDEVICE_A_LISTEN_PORT] ||
--	     info->attrs[WGDEVICE_A_FWMARK]) &&
--	    !ns_capable(wg->creating_net->user_ns, CAP_NET_ADMIN))
--		goto out;
-+	if (info->attrs[WGDEVICE_A_LISTEN_PORT] || info->attrs[WGDEVICE_A_FWMARK]) {
-+		struct net *net;
-+		rcu_read_lock();
-+		net = rcu_dereference(wg->creating_net);
-+		ret = !net || !ns_capable(net->user_ns, CAP_NET_ADMIN) ? -EPERM : 0;
-+		rcu_read_unlock();
-+		if (ret)
-+			goto out;
-+	}
- 
- 	++wg->device_update_gen;
- 
---- a/drivers/net/wireguard/socket.c
-+++ b/drivers/net/wireguard/socket.c
-@@ -347,6 +347,7 @@ static void set_sock_opts(struct socket
- 
- int wg_socket_init(struct wg_device *wg, u16 port)
- {
-+	struct net *net;
- 	int ret;
- 	struct udp_tunnel_sock_cfg cfg = {
- 		.sk_user_data = wg,
-@@ -371,37 +372,47 @@ int wg_socket_init(struct wg_device *wg,
- 	};
- #endif
- 
-+	rcu_read_lock();
-+	net = rcu_dereference(wg->creating_net);
-+	net = net ? maybe_get_net(net) : NULL;
-+	rcu_read_unlock();
-+	if (unlikely(!net))
-+		return -ENONET;
-+
- #if IS_ENABLED(CONFIG_IPV6)
- retry:
- #endif
- 
--	ret = udp_sock_create(wg->creating_net, &port4, &new4);
-+	ret = udp_sock_create(net, &port4, &new4);
- 	if (ret < 0) {
- 		pr_err("%s: Could not create IPv4 socket\n", wg->dev->name);
--		return ret;
-+		goto out;
- 	}
- 	set_sock_opts(new4);
--	setup_udp_tunnel_sock(wg->creating_net, new4, &cfg);
-+	setup_udp_tunnel_sock(net, new4, &cfg);
- 
- #if IS_ENABLED(CONFIG_IPV6)
- 	if (ipv6_mod_enabled()) {
- 		port6.local_udp_port = inet_sk(new4->sk)->inet_sport;
--		ret = udp_sock_create(wg->creating_net, &port6, &new6);
-+		ret = udp_sock_create(net, &port6, &new6);
- 		if (ret < 0) {
- 			udp_tunnel_sock_release(new4);
- 			if (ret == -EADDRINUSE && !port && retries++ < 100)
- 				goto retry;
- 			pr_err("%s: Could not create IPv6 socket\n",
- 			       wg->dev->name);
--			return ret;
-+			goto out;
- 		}
- 		set_sock_opts(new6);
--		setup_udp_tunnel_sock(wg->creating_net, new6, &cfg);
-+		setup_udp_tunnel_sock(net, new6, &cfg);
- 	}
- #endif
- 
- 	wg_socket_reinit(wg, new4->sk, new6 ? new6->sk : NULL);
--	return 0;
-+	ret = 0;
-+out:
-+	put_net(net);
-+	return ret;
- }
- 
- void wg_socket_reinit(struct wg_device *wg, struct sock *new4,
---- a/tools/testing/selftests/wireguard/netns.sh
-+++ b/tools/testing/selftests/wireguard/netns.sh
-@@ -587,9 +587,20 @@ ip0 link set wg0 up
- kill $ncat_pid
- ip0 link del wg0
- 
-+# Ensure there aren't circular reference loops
-+ip1 link add wg1 type wireguard
-+ip2 link add wg2 type wireguard
-+ip1 link set wg1 netns $netns2
-+ip2 link set wg2 netns $netns1
-+pp ip netns delete $netns1
-+pp ip netns delete $netns2
-+pp ip netns add $netns1
-+pp ip netns add $netns2
-+
-+sleep 2 # Wait for cleanup and grace periods
- declare -A objects
- while read -t 0.1 -r line 2>/dev/null || [[ $? -ne 142 ]]; do
--	[[ $line =~ .*(wg[0-9]+:\ [A-Z][a-z]+\ [0-9]+)\ .*(created|destroyed).* ]] || continue
-+	[[ $line =~ .*(wg[0-9]+:\ [A-Z][a-z]+\ ?[0-9]*)\ .*(created|destroyed).* ]] || continue
- 	objects["${BASH_REMATCH[1]}"]+="${BASH_REMATCH[2]}"
- done < /dev/kmsg
- alldeleted=1
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0108-wireguard-receive-account-for-napi_gro_receive-never.patch b/target/linux/generic/backport-5.4/080-wireguard-0108-wireguard-receive-account-for-napi_gro_receive-never.patch
deleted file mode 100644
index eceb0b9255..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0108-wireguard-receive-account-for-napi_gro_receive-never.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Wed, 24 Jun 2020 16:06:03 -0600
-Subject: [PATCH] wireguard: receive: account for napi_gro_receive never
- returning GRO_DROP
-
-commit df08126e3833e9dca19e2407db5f5860a7c194fb upstream.
-
-The napi_gro_receive function no longer returns GRO_DROP ever, making
-handling GRO_DROP dead code. This commit removes that dead code.
-Further, it's not even clear that device drivers have any business in
-taking action after passing off received packets; that's arguably out of
-their hands.
-
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/receive.c | 10 ++--------
- 1 file changed, 2 insertions(+), 8 deletions(-)
-
---- a/drivers/net/wireguard/receive.c
-+++ b/drivers/net/wireguard/receive.c
-@@ -414,14 +414,8 @@ static void wg_packet_consume_data_done(
- 	if (unlikely(routed_peer != peer))
- 		goto dishonest_packet_peer;
- 
--	if (unlikely(napi_gro_receive(&peer->napi, skb) == GRO_DROP)) {
--		++dev->stats.rx_dropped;
--		net_dbg_ratelimited("%s: Failed to give packet to userspace from peer %llu (%pISpfsc)\n",
--				    dev->name, peer->internal_id,
--				    &peer->endpoint.addr);
--	} else {
--		update_rx_stats(peer, message_data_len(len_before_trim));
--	}
-+	napi_gro_receive(&peer->napi, skb);
-+	update_rx_stats(peer, message_data_len(len_before_trim));
- 	return;
- 
- dishonest_packet_peer:
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0109-net-ip_tunnel-add-header_ops-for-layer-3-devices.patch b/target/linux/generic/backport-5.4/080-wireguard-0109-net-ip_tunnel-add-header_ops-for-layer-3-devices.patch
deleted file mode 100644
index cfd6b1457c..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0109-net-ip_tunnel-add-header_ops-for-layer-3-devices.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Mon, 29 Jun 2020 19:06:18 -0600
-Subject: [PATCH] net: ip_tunnel: add header_ops for layer 3 devices
-
-commit 2606aff916854b61234bf85001be9777bab2d5f8 upstream.
-
-Some devices that take straight up layer 3 packets benefit from having a
-shared header_ops so that AF_PACKET sockets can inject packets that are
-recognized. This shared infrastructure will be used by other drivers
-that currently can't inject packets using AF_PACKET. It also exposes the
-parser function, as it is useful in standalone form too.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Acked-by: Willem de Bruijn <willemb@google.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- include/net/ip_tunnels.h  |  3 +++
- net/ipv4/ip_tunnel_core.c | 18 ++++++++++++++++++
- 2 files changed, 21 insertions(+)
-
---- a/include/net/ip_tunnels.h
-+++ b/include/net/ip_tunnels.h
-@@ -289,6 +289,9 @@ int ip_tunnel_newlink(struct net_device
- 		      struct ip_tunnel_parm *p, __u32 fwmark);
- void ip_tunnel_setup(struct net_device *dev, unsigned int net_id);
- 
-+extern const struct header_ops ip_tunnel_header_ops;
-+__be16 ip_tunnel_parse_protocol(const struct sk_buff *skb);
-+
- struct ip_tunnel_encap_ops {
- 	size_t (*encap_hlen)(struct ip_tunnel_encap *e);
- 	int (*build_header)(struct sk_buff *skb, struct ip_tunnel_encap *e,
---- a/net/ipv4/ip_tunnel_core.c
-+++ b/net/ipv4/ip_tunnel_core.c
-@@ -446,3 +446,21 @@ void ip_tunnel_unneed_metadata(void)
- 	static_branch_dec(&ip_tunnel_metadata_cnt);
- }
- EXPORT_SYMBOL_GPL(ip_tunnel_unneed_metadata);
-+
-+/* Returns either the correct skb->protocol value, or 0 if invalid. */
-+__be16 ip_tunnel_parse_protocol(const struct sk_buff *skb)
-+{
-+	if (skb_network_header(skb) >= skb->head &&
-+	    (skb_network_header(skb) + sizeof(struct iphdr)) <= skb_tail_pointer(skb) &&
-+	    ip_hdr(skb)->version == 4)
-+		return htons(ETH_P_IP);
-+	if (skb_network_header(skb) >= skb->head &&
-+	    (skb_network_header(skb) + sizeof(struct ipv6hdr)) <= skb_tail_pointer(skb) &&
-+	    ipv6_hdr(skb)->version == 6)
-+		return htons(ETH_P_IPV6);
-+	return 0;
-+}
-+EXPORT_SYMBOL(ip_tunnel_parse_protocol);
-+
-+const struct header_ops ip_tunnel_header_ops = { .parse_protocol = ip_tunnel_parse_protocol };
-+EXPORT_SYMBOL(ip_tunnel_header_ops);
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0110-wireguard-implement-header_ops-parse_protocol-for-AF.patch b/target/linux/generic/backport-5.4/080-wireguard-0110-wireguard-implement-header_ops-parse_protocol-for-AF.patch
deleted file mode 100644
index 415ecffeef..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0110-wireguard-implement-header_ops-parse_protocol-for-AF.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Mon, 29 Jun 2020 19:06:20 -0600
-Subject: [PATCH] wireguard: implement header_ops->parse_protocol for AF_PACKET
-
-commit 01a4967c71c004f8ecad4ab57021348636502fa9 upstream.
-
-WireGuard uses skb->protocol to determine packet type, and bails out if
-it's not set or set to something it's not expecting. For AF_PACKET
-injection, we need to support its call chain of:
-
-    packet_sendmsg -> packet_snd -> packet_parse_headers ->
-      dev_parse_header_protocol -> parse_protocol
-
-Without a valid parse_protocol, this returns zero, and wireguard then
-rejects the skb. So, this wires up the ip_tunnel handler for layer 3
-packets for that case.
-
-Reported-by: Hans Wippel <ndev@hwipl.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/device.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/wireguard/device.c
-+++ b/drivers/net/wireguard/device.c
-@@ -262,6 +262,7 @@ static void wg_setup(struct net_device *
- 			     max(sizeof(struct ipv6hdr), sizeof(struct iphdr));
- 
- 	dev->netdev_ops = &netdev_ops;
-+	dev->header_ops = &ip_tunnel_header_ops;
- 	dev->hard_header_len = 0;
- 	dev->addr_len = 0;
- 	dev->needed_headroom = DATA_PACKET_HEAD_ROOM;
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0111-wireguard-queueing-make-use-of-ip_tunnel_parse_proto.patch b/target/linux/generic/backport-5.4/080-wireguard-0111-wireguard-queueing-make-use-of-ip_tunnel_parse_proto.patch
deleted file mode 100644
index a777732ce7..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0111-wireguard-queueing-make-use-of-ip_tunnel_parse_proto.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Mon, 29 Jun 2020 19:06:21 -0600
-Subject: [PATCH] wireguard: queueing: make use of ip_tunnel_parse_protocol
-
-commit 1a574074ae7d1d745c16f7710655f38a53174c27 upstream.
-
-Now that wg_examine_packet_protocol has been added for general
-consumption as ip_tunnel_parse_protocol, it's possible to remove
-wg_examine_packet_protocol and simply use the new
-ip_tunnel_parse_protocol function directly.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/queueing.h | 19 ++-----------------
- drivers/net/wireguard/receive.c  |  2 +-
- 2 files changed, 3 insertions(+), 18 deletions(-)
-
---- a/drivers/net/wireguard/queueing.h
-+++ b/drivers/net/wireguard/queueing.h
-@@ -11,6 +11,7 @@
- #include <linux/skbuff.h>
- #include <linux/ip.h>
- #include <linux/ipv6.h>
-+#include <net/ip_tunnels.h>
- 
- struct wg_device;
- struct wg_peer;
-@@ -65,25 +66,9 @@ struct packet_cb {
- #define PACKET_CB(skb) ((struct packet_cb *)((skb)->cb))
- #define PACKET_PEER(skb) (PACKET_CB(skb)->keypair->entry.peer)
- 
--/* Returns either the correct skb->protocol value, or 0 if invalid. */
--static inline __be16 wg_examine_packet_protocol(struct sk_buff *skb)
--{
--	if (skb_network_header(skb) >= skb->head &&
--	    (skb_network_header(skb) + sizeof(struct iphdr)) <=
--		    skb_tail_pointer(skb) &&
--	    ip_hdr(skb)->version == 4)
--		return htons(ETH_P_IP);
--	if (skb_network_header(skb) >= skb->head &&
--	    (skb_network_header(skb) + sizeof(struct ipv6hdr)) <=
--		    skb_tail_pointer(skb) &&
--	    ipv6_hdr(skb)->version == 6)
--		return htons(ETH_P_IPV6);
--	return 0;
--}
--
- static inline bool wg_check_packet_protocol(struct sk_buff *skb)
- {
--	__be16 real_protocol = wg_examine_packet_protocol(skb);
-+	__be16 real_protocol = ip_tunnel_parse_protocol(skb);
- 	return real_protocol && skb->protocol == real_protocol;
- }
- 
---- a/drivers/net/wireguard/receive.c
-+++ b/drivers/net/wireguard/receive.c
-@@ -387,7 +387,7 @@ static void wg_packet_consume_data_done(
- 	 */
- 	skb->ip_summed = CHECKSUM_UNNECESSARY;
- 	skb->csum_level = ~0; /* All levels */
--	skb->protocol = wg_examine_packet_protocol(skb);
-+	skb->protocol = ip_tunnel_parse_protocol(skb);
- 	if (skb->protocol == htons(ETH_P_IP)) {
- 		len = ntohs(ip_hdr(skb)->tot_len);
- 		if (unlikely(len < sizeof(struct iphdr)))
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0112-netlink-consistently-use-NLA_POLICY_EXACT_LEN.patch b/target/linux/generic/backport-5.4/080-wireguard-0112-netlink-consistently-use-NLA_POLICY_EXACT_LEN.patch
deleted file mode 100644
index 4b2712bb2d..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0112-netlink-consistently-use-NLA_POLICY_EXACT_LEN.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Tue, 18 Aug 2020 10:17:31 +0200
-Subject: [PATCH] netlink: consistently use NLA_POLICY_EXACT_LEN()
-
-commit 8140860c817f3e9f78bcd1e420b9777ddcbaa629 upstream.
-
-Change places that open-code NLA_POLICY_EXACT_LEN() to
-use the macro instead, giving us flexibility in how we
-handle the details of the macro.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-[Jason: only picked the drivers/net/wireguard/* part]
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/netlink.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/net/wireguard/netlink.c
-+++ b/drivers/net/wireguard/netlink.c
-@@ -22,8 +22,8 @@ static struct genl_family genl_family;
- static const struct nla_policy device_policy[WGDEVICE_A_MAX + 1] = {
- 	[WGDEVICE_A_IFINDEX]		= { .type = NLA_U32 },
- 	[WGDEVICE_A_IFNAME]		= { .type = NLA_NUL_STRING, .len = IFNAMSIZ - 1 },
--	[WGDEVICE_A_PRIVATE_KEY]	= { .type = NLA_EXACT_LEN, .len = NOISE_PUBLIC_KEY_LEN },
--	[WGDEVICE_A_PUBLIC_KEY]		= { .type = NLA_EXACT_LEN, .len = NOISE_PUBLIC_KEY_LEN },
-+	[WGDEVICE_A_PRIVATE_KEY]	= NLA_POLICY_EXACT_LEN(NOISE_PUBLIC_KEY_LEN),
-+	[WGDEVICE_A_PUBLIC_KEY]		= NLA_POLICY_EXACT_LEN(NOISE_PUBLIC_KEY_LEN),
- 	[WGDEVICE_A_FLAGS]		= { .type = NLA_U32 },
- 	[WGDEVICE_A_LISTEN_PORT]	= { .type = NLA_U16 },
- 	[WGDEVICE_A_FWMARK]		= { .type = NLA_U32 },
-@@ -31,12 +31,12 @@ static const struct nla_policy device_po
- };
- 
- static const struct nla_policy peer_policy[WGPEER_A_MAX + 1] = {
--	[WGPEER_A_PUBLIC_KEY]				= { .type = NLA_EXACT_LEN, .len = NOISE_PUBLIC_KEY_LEN },
--	[WGPEER_A_PRESHARED_KEY]			= { .type = NLA_EXACT_LEN, .len = NOISE_SYMMETRIC_KEY_LEN },
-+	[WGPEER_A_PUBLIC_KEY]				= NLA_POLICY_EXACT_LEN(NOISE_PUBLIC_KEY_LEN),
-+	[WGPEER_A_PRESHARED_KEY]			= NLA_POLICY_EXACT_LEN(NOISE_SYMMETRIC_KEY_LEN),
- 	[WGPEER_A_FLAGS]				= { .type = NLA_U32 },
- 	[WGPEER_A_ENDPOINT]				= { .type = NLA_MIN_LEN, .len = sizeof(struct sockaddr) },
- 	[WGPEER_A_PERSISTENT_KEEPALIVE_INTERVAL]	= { .type = NLA_U16 },
--	[WGPEER_A_LAST_HANDSHAKE_TIME]			= { .type = NLA_EXACT_LEN, .len = sizeof(struct __kernel_timespec) },
-+	[WGPEER_A_LAST_HANDSHAKE_TIME]			= NLA_POLICY_EXACT_LEN(sizeof(struct __kernel_timespec)),
- 	[WGPEER_A_RX_BYTES]				= { .type = NLA_U64 },
- 	[WGPEER_A_TX_BYTES]				= { .type = NLA_U64 },
- 	[WGPEER_A_ALLOWEDIPS]				= { .type = NLA_NESTED },
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0113-netlink-consistently-use-NLA_POLICY_MIN_LEN.patch b/target/linux/generic/backport-5.4/080-wireguard-0113-netlink-consistently-use-NLA_POLICY_MIN_LEN.patch
deleted file mode 100644
index 4b414bc309..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0113-netlink-consistently-use-NLA_POLICY_MIN_LEN.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Tue, 18 Aug 2020 10:17:32 +0200
-Subject: [PATCH] netlink: consistently use NLA_POLICY_MIN_LEN()
-
-commit bc0435855041d7fff0b83dd992fc4be34aa11afb upstream.
-
-Change places that open-code NLA_POLICY_MIN_LEN() to
-use the macro instead, giving us flexibility in how we
-handle the details of the macro.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-[Jason: only picked the drivers/net/wireguard/* part]
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/netlink.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireguard/netlink.c
-+++ b/drivers/net/wireguard/netlink.c
-@@ -34,7 +34,7 @@ static const struct nla_policy peer_poli
- 	[WGPEER_A_PUBLIC_KEY]				= NLA_POLICY_EXACT_LEN(NOISE_PUBLIC_KEY_LEN),
- 	[WGPEER_A_PRESHARED_KEY]			= NLA_POLICY_EXACT_LEN(NOISE_SYMMETRIC_KEY_LEN),
- 	[WGPEER_A_FLAGS]				= { .type = NLA_U32 },
--	[WGPEER_A_ENDPOINT]				= { .type = NLA_MIN_LEN, .len = sizeof(struct sockaddr) },
-+	[WGPEER_A_ENDPOINT]				= NLA_POLICY_MIN_LEN(sizeof(struct sockaddr)),
- 	[WGPEER_A_PERSISTENT_KEEPALIVE_INTERVAL]	= { .type = NLA_U16 },
- 	[WGPEER_A_LAST_HANDSHAKE_TIME]			= NLA_POLICY_EXACT_LEN(sizeof(struct __kernel_timespec)),
- 	[WGPEER_A_RX_BYTES]				= { .type = NLA_U64 },
-@@ -45,7 +45,7 @@ static const struct nla_policy peer_poli
- 
- static const struct nla_policy allowedip_policy[WGALLOWEDIP_A_MAX + 1] = {
- 	[WGALLOWEDIP_A_FAMILY]		= { .type = NLA_U16 },
--	[WGALLOWEDIP_A_IPADDR]		= { .type = NLA_MIN_LEN, .len = sizeof(struct in_addr) },
-+	[WGALLOWEDIP_A_IPADDR]		= NLA_POLICY_MIN_LEN(sizeof(struct in_addr)),
- 	[WGALLOWEDIP_A_CIDR_MASK]	= { .type = NLA_U8 }
- };
- 
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0114-wireguard-noise-take-lock-when-removing-handshake-en.patch b/target/linux/generic/backport-5.4/080-wireguard-0114-wireguard-noise-take-lock-when-removing-handshake-en.patch
deleted file mode 100644
index e80528c91b..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0114-wireguard-noise-take-lock-when-removing-handshake-en.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Wed, 9 Sep 2020 13:58:14 +0200
-Subject: [PATCH] wireguard: noise: take lock when removing handshake entry
- from table
-
-commit 9179ba31367bcf481c3c79b5f028c94faad9f30a upstream.
-
-Eric reported that syzkaller found a race of this variety:
-
-CPU 1                                       CPU 2
--------------------------------------------|---------------------------------------
-wg_index_hashtable_replace(old, ...)       |
-  if (hlist_unhashed(&old->index_hash))    |
-                                           | wg_index_hashtable_remove(old)
-                                           |   hlist_del_init_rcu(&old->index_hash)
-				           |     old->index_hash.pprev = NULL
-  hlist_replace_rcu(&old->index_hash, ...) |
-    *old->index_hash.pprev                 |
-
-Syzbot wasn't actually able to reproduce this more than once or create a
-reproducer, because the race window between checking "hlist_unhashed" and
-calling "hlist_replace_rcu" is just so small. Adding an mdelay(5) or
-similar there helps make this demonstrable using this simple script:
-
-    #!/bin/bash
-    set -ex
-    trap 'kill $pid1; kill $pid2; ip link del wg0; ip link del wg1' EXIT
-    ip link add wg0 type wireguard
-    ip link add wg1 type wireguard
-    wg set wg0 private-key <(wg genkey) listen-port 9999
-    wg set wg1 private-key <(wg genkey) peer $(wg show wg0 public-key) endpoint 127.0.0.1:9999 persistent-keepalive 1
-    wg set wg0 peer $(wg show wg1 public-key)
-    ip link set wg0 up
-    yes link set wg1 up | ip -force -batch - &
-    pid1=$!
-    yes link set wg1 down | ip -force -batch - &
-    pid2=$!
-    wait
-
-The fundumental underlying problem is that we permit calls to wg_index_
-hashtable_remove(handshake.entry) without requiring the caller to take
-the handshake mutex that is intended to protect members of handshake
-during mutations. This is consistently the case with calls to wg_index_
-hashtable_insert(handshake.entry) and wg_index_hashtable_replace(
-handshake.entry), but it's missing from a pertinent callsite of wg_
-index_hashtable_remove(handshake.entry). So, this patch makes sure that
-mutex is taken.
-
-The original code was a little bit funky though, in the form of:
-
-    remove(handshake.entry)
-    lock(), memzero(handshake.some_members), unlock()
-    remove(handshake.entry)
-
-The original intention of that double removal pattern outside the lock
-appears to be some attempt to prevent insertions that might happen while
-locks are dropped during expensive crypto operations, but actually, all
-callers of wg_index_hashtable_insert(handshake.entry) take the write
-lock and then explicitly check handshake.state, as they should, which
-the aforementioned memzero clears, which means an insertion should
-already be impossible. And regardless, the original intention was
-necessarily racy, since it wasn't guaranteed that something else would
-run after the unlock() instead of after the remove(). So, from a
-soundness perspective, it seems positive to remove what looks like a
-hack at best.
-
-The crash from both syzbot and from the script above is as follows:
-
-  general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
-  KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
-  CPU: 0 PID: 7395 Comm: kworker/0:3 Not tainted 5.9.0-rc4-syzkaller #0
-  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
-  Workqueue: wg-kex-wg1 wg_packet_handshake_receive_worker
-  RIP: 0010:hlist_replace_rcu include/linux/rculist.h:505 [inline]
-  RIP: 0010:wg_index_hashtable_replace+0x176/0x330 drivers/net/wireguard/peerlookup.c:174
-  Code: 00 fc ff df 48 89 f9 48 c1 e9 03 80 3c 01 00 0f 85 44 01 00 00 48 b9 00 00 00 00 00 fc ff df 48 8b 45 10 48 89 c6 48 c1 ee 03 <80> 3c 0e 00 0f 85 06 01 00 00 48 85 d2 4c 89 28 74 47 e8 a3 4f b5
-  RSP: 0018:ffffc90006a97bf8 EFLAGS: 00010246
-  RAX: 0000000000000000 RBX: ffff888050ffc4f8 RCX: dffffc0000000000
-  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88808e04e010
-  RBP: ffff88808e04e000 R08: 0000000000000001 R09: ffff8880543d0000
-  R10: ffffed100a87a000 R11: 000000000000016e R12: ffff8880543d0000
-  R13: ffff88808e04e008 R14: ffff888050ffc508 R15: ffff888050ffc500
-  FS:  0000000000000000(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000
-  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
-  CR2: 00000000f5505db0 CR3: 0000000097cf7000 CR4: 00000000001526f0
-  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
-  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
-  Call Trace:
-  wg_noise_handshake_begin_session+0x752/0xc9a drivers/net/wireguard/noise.c:820
-  wg_receive_handshake_packet drivers/net/wireguard/receive.c:183 [inline]
-  wg_packet_handshake_receive_worker+0x33b/0x730 drivers/net/wireguard/receive.c:220
-  process_one_work+0x94c/0x1670 kernel/workqueue.c:2269
-  worker_thread+0x64c/0x1120 kernel/workqueue.c:2415
-  kthread+0x3b5/0x4a0 kernel/kthread.c:292
-  ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
-
-Reported-by: syzbot <syzkaller@googlegroups.com>
-Reported-by: Eric Dumazet <edumazet@google.com>
-Link: https://lore.kernel.org/wireguard/20200908145911.4090480-1-edumazet@google.com/
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/noise.c | 5 +----
- 1 file changed, 1 insertion(+), 4 deletions(-)
-
---- a/drivers/net/wireguard/noise.c
-+++ b/drivers/net/wireguard/noise.c
-@@ -87,15 +87,12 @@ static void handshake_zero(struct noise_
- 
- void wg_noise_handshake_clear(struct noise_handshake *handshake)
- {
-+	down_write(&handshake->lock);
- 	wg_index_hashtable_remove(
- 			handshake->entry.peer->device->index_hashtable,
- 			&handshake->entry);
--	down_write(&handshake->lock);
- 	handshake_zero(handshake);
- 	up_write(&handshake->lock);
--	wg_index_hashtable_remove(
--			handshake->entry.peer->device->index_hashtable,
--			&handshake->entry);
- }
- 
- static struct noise_keypair *keypair_create(struct wg_peer *peer)
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0115-wireguard-peerlookup-take-lock-before-checking-hash-.patch b/target/linux/generic/backport-5.4/080-wireguard-0115-wireguard-peerlookup-take-lock-before-checking-hash-.patch
deleted file mode 100644
index e7f46ddf9c..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0115-wireguard-peerlookup-take-lock-before-checking-hash-.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Wed, 9 Sep 2020 13:58:15 +0200
-Subject: [PATCH] wireguard: peerlookup: take lock before checking hash in
- replace operation
-
-commit 6147f7b1e90ff09bd52afc8b9206a7fcd133daf7 upstream.
-
-Eric's suggested fix for the previous commit's mentioned race condition
-was to simply take the table->lock in wg_index_hashtable_replace(). The
-table->lock of the hash table is supposed to protect the bucket heads,
-not the entires, but actually, since all the mutator functions are
-already taking it, it makes sense to take it too for the test to
-hlist_unhashed, as a defense in depth measure, so that it no longer
-races with deletions, regardless of what other locks are protecting
-individual entries. This is sensible from a performance perspective
-because, as Eric pointed out, the case of being unhashed is already the
-unlikely case, so this won't add common contention. And comparing
-instructions, this basically doesn't make much of a difference other
-than pushing and popping %r13, used by the new `bool ret`. More
-generally, I like the idea of locking consistency across table mutator
-functions, and this might let me rest slightly easier at night.
-
-Suggested-by: Eric Dumazet <edumazet@google.com>
-Link: https://lore.kernel.org/wireguard/20200908145911.4090480-1-edumazet@google.com/
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/peerlookup.c | 11 ++++++++---
- 1 file changed, 8 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireguard/peerlookup.c
-+++ b/drivers/net/wireguard/peerlookup.c
-@@ -167,9 +167,13 @@ bool wg_index_hashtable_replace(struct i
- 				struct index_hashtable_entry *old,
- 				struct index_hashtable_entry *new)
- {
--	if (unlikely(hlist_unhashed(&old->index_hash)))
--		return false;
-+	bool ret;
-+
- 	spin_lock_bh(&table->lock);
-+	ret = !hlist_unhashed(&old->index_hash);
-+	if (unlikely(!ret))
-+		goto out;
-+
- 	new->index = old->index;
- 	hlist_replace_rcu(&old->index_hash, &new->index_hash);
- 
-@@ -180,8 +184,9 @@ bool wg_index_hashtable_replace(struct i
- 	 * simply gets dropped, which isn't terrible.
- 	 */
- 	INIT_HLIST_NODE(&old->index_hash);
-+out:
- 	spin_unlock_bh(&table->lock);
--	return true;
-+	return ret;
- }
- 
- void wg_index_hashtable_remove(struct index_hashtable *table,
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0116-wireguard-selftests-check-that-route_me_harder-packe.patch b/target/linux/generic/backport-5.4/080-wireguard-0116-wireguard-selftests-check-that-route_me_harder-packe.patch
deleted file mode 100644
index 09c1b0b8f8..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0116-wireguard-selftests-check-that-route_me_harder-packe.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Thu, 29 Oct 2020 03:56:05 +0100
-Subject: [PATCH] wireguard: selftests: check that route_me_harder packets use
- the right sk
-
-commit af8afcf1fdd5f365f70e2386c2d8c7a1abd853d7 upstream.
-
-If netfilter changes the packet mark, the packet is rerouted. The
-ip_route_me_harder family of functions fails to use the right sk, opting
-to instead use skb->sk, resulting in a routing loop when used with
-tunnels. With the next change fixing this issue in netfilter, test for
-the relevant condition inside our test suite, since wireguard was where
-the bug was discovered.
-
-Reported-by: Chen Minqiang <ptpt52@gmail.com>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- tools/testing/selftests/wireguard/netns.sh           | 8 ++++++++
- tools/testing/selftests/wireguard/qemu/kernel.config | 2 ++
- 2 files changed, 10 insertions(+)
-
---- a/tools/testing/selftests/wireguard/netns.sh
-+++ b/tools/testing/selftests/wireguard/netns.sh
-@@ -316,6 +316,14 @@ pp sleep 3
- n2 ping -W 1 -c 1 192.168.241.1
- n1 wg set wg0 peer "$pub2" persistent-keepalive 0
- 
-+# Test that sk_bound_dev_if works
-+n1 ping -I wg0 -c 1 -W 1 192.168.241.2
-+# What about when the mark changes and the packet must be rerouted?
-+n1 iptables -t mangle -I OUTPUT -j MARK --set-xmark 1
-+n1 ping -c 1 -W 1 192.168.241.2 # First the boring case
-+n1 ping -I wg0 -c 1 -W 1 192.168.241.2 # Then the sk_bound_dev_if case
-+n1 iptables -t mangle -D OUTPUT -j MARK --set-xmark 1
-+
- # Test that onion routing works, even when it loops
- n1 wg set wg0 peer "$pub3" allowed-ips 192.168.242.2/32 endpoint 192.168.241.2:5
- ip1 addr add 192.168.242.1/24 dev wg0
---- a/tools/testing/selftests/wireguard/qemu/kernel.config
-+++ b/tools/testing/selftests/wireguard/qemu/kernel.config
-@@ -18,10 +18,12 @@ CONFIG_NF_NAT=y
- CONFIG_NETFILTER_XTABLES=y
- CONFIG_NETFILTER_XT_NAT=y
- CONFIG_NETFILTER_XT_MATCH_LENGTH=y
-+CONFIG_NETFILTER_XT_MARK=y
- CONFIG_NF_CONNTRACK_IPV4=y
- CONFIG_NF_NAT_IPV4=y
- CONFIG_IP_NF_IPTABLES=y
- CONFIG_IP_NF_FILTER=y
-+CONFIG_IP_NF_MANGLE=y
- CONFIG_IP_NF_NAT=y
- CONFIG_IP_ADVANCED_ROUTER=y
- CONFIG_IP_MULTIPLE_TABLES=y
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0117-wireguard-avoid-double-unlikely-notation-when-using-.patch b/target/linux/generic/backport-5.4/080-wireguard-0117-wireguard-avoid-double-unlikely-notation-when-using-.patch
deleted file mode 100644
index 7dfc1bb919..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0117-wireguard-avoid-double-unlikely-notation-when-using-.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Antonio Quartulli <a@unstable.cc>
-Date: Mon, 22 Feb 2021 17:25:43 +0100
-Subject: [PATCH] wireguard: avoid double unlikely() notation when using
- IS_ERR()
-
-commit 30ac4e2f54ec067b7b9ca0db27e75681581378d6 upstream.
-
-The definition of IS_ERR() already applies the unlikely() notation
-when checking the error status of the passed pointer. For this
-reason there is no need to have the same notation outside of
-IS_ERR() itself.
-
-Clean up code by removing redundant notation.
-
-Signed-off-by: Antonio Quartulli <a@unstable.cc>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/device.c | 2 +-
- drivers/net/wireguard/socket.c | 4 ++--
- 2 files changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireguard/device.c
-+++ b/drivers/net/wireguard/device.c
-@@ -157,7 +157,7 @@ static netdev_tx_t wg_xmit(struct sk_buf
- 	} else {
- 		struct sk_buff *segs = skb_gso_segment(skb, 0);
- 
--		if (unlikely(IS_ERR(segs))) {
-+		if (IS_ERR(segs)) {
- 			ret = PTR_ERR(segs);
- 			goto err_peer;
- 		}
---- a/drivers/net/wireguard/socket.c
-+++ b/drivers/net/wireguard/socket.c
-@@ -71,7 +71,7 @@ static int send4(struct wg_device *wg, s
- 				ip_rt_put(rt);
- 			rt = ip_route_output_flow(sock_net(sock), &fl, sock);
- 		}
--		if (unlikely(IS_ERR(rt))) {
-+		if (IS_ERR(rt)) {
- 			ret = PTR_ERR(rt);
- 			net_dbg_ratelimited("%s: No route to %pISpfsc, error %d\n",
- 					    wg->dev->name, &endpoint->addr, ret);
-@@ -138,7 +138,7 @@ static int send6(struct wg_device *wg, s
- 		}
- 		dst = ipv6_stub->ipv6_dst_lookup_flow(sock_net(sock), sock, &fl,
- 						      NULL);
--		if (unlikely(IS_ERR(dst))) {
-+		if (IS_ERR(dst)) {
- 			ret = PTR_ERR(dst);
- 			net_dbg_ratelimited("%s: No route to %pISpfsc, error %d\n",
- 					    wg->dev->name, &endpoint->addr, ret);
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0118-wireguard-socket-remove-bogus-__be32-annotation.patch b/target/linux/generic/backport-5.4/080-wireguard-0118-wireguard-socket-remove-bogus-__be32-annotation.patch
deleted file mode 100644
index 1796f54de9..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0118-wireguard-socket-remove-bogus-__be32-annotation.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Jann Horn <jannh@google.com>
-Date: Mon, 22 Feb 2021 17:25:44 +0100
-Subject: [PATCH] wireguard: socket: remove bogus __be32 annotation
-
-commit 7f57bd8dc22de35ddd895294aa554003e4f19a72 upstream.
-
-The endpoint->src_if4 has nothing to do with fixed-endian numbers; remove
-the bogus annotation.
-
-This was introduced in
-https://git.zx2c4.com/wireguard-monolithic-historical/commit?id=14e7d0a499a676ec55176c0de2f9fcbd34074a82
-in the historical WireGuard repo because the old code used to
-zero-initialize multiple members as follows:
-
-    endpoint->src4.s_addr = endpoint->src_if4 = fl.saddr = 0;
-
-Because fl.saddr is fixed-endian and an assignment returns a value with the
-type of its left operand, this meant that sparse detected an assignment
-between values of different endianness.
-
-Since then, this assignment was already split up into separate statements;
-just the cast survived.
-
-Signed-off-by: Jann Horn <jannh@google.com>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/socket.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireguard/socket.c
-+++ b/drivers/net/wireguard/socket.c
-@@ -53,7 +53,7 @@ static int send4(struct wg_device *wg, s
- 		if (unlikely(!inet_confirm_addr(sock_net(sock), NULL, 0,
- 						fl.saddr, RT_SCOPE_HOST))) {
- 			endpoint->src4.s_addr = 0;
--			*(__force __be32 *)&endpoint->src_if4 = 0;
-+			endpoint->src_if4 = 0;
- 			fl.saddr = 0;
- 			if (cache)
- 				dst_cache_reset(cache);
-@@ -63,7 +63,7 @@ static int send4(struct wg_device *wg, s
- 			     PTR_ERR(rt) == -EINVAL) || (!IS_ERR(rt) &&
- 			     rt->dst.dev->ifindex != endpoint->src_if4)))) {
- 			endpoint->src4.s_addr = 0;
--			*(__force __be32 *)&endpoint->src_if4 = 0;
-+			endpoint->src_if4 = 0;
- 			fl.saddr = 0;
- 			if (cache)
- 				dst_cache_reset(cache);
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0119-wireguard-selftests-test-multiple-parallel-streams.patch b/target/linux/generic/backport-5.4/080-wireguard-0119-wireguard-selftests-test-multiple-parallel-streams.patch
deleted file mode 100644
index 3093de45f7..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0119-wireguard-selftests-test-multiple-parallel-streams.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Mon, 22 Feb 2021 17:25:45 +0100
-Subject: [PATCH] wireguard: selftests: test multiple parallel streams
-
-commit d5a49aa6c3e264a93a7d08485d66e346be0969dd upstream.
-
-In order to test ndo_start_xmit being called in parallel, explicitly add
-separate tests, which should all run on different cores. This should
-help tease out bugs associated with queueing up packets from different
-cores in parallel. Currently, it hasn't found those types of bugs, but
-given future planned work, this is a useful regression to avoid.
-
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- tools/testing/selftests/wireguard/netns.sh | 15 ++++++++++++++-
- 1 file changed, 14 insertions(+), 1 deletion(-)
-
---- a/tools/testing/selftests/wireguard/netns.sh
-+++ b/tools/testing/selftests/wireguard/netns.sh
-@@ -39,7 +39,7 @@ ip0() { pretty 0 "ip $*"; ip -n $netns0
- ip1() { pretty 1 "ip $*"; ip -n $netns1 "$@"; }
- ip2() { pretty 2 "ip $*"; ip -n $netns2 "$@"; }
- sleep() { read -t "$1" -N 1 || true; }
--waitiperf() { pretty "${1//*-}" "wait for iperf:5201 pid $2"; while [[ $(ss -N "$1" -tlpH 'sport = 5201') != *\"iperf3\",pid=$2,fd=* ]]; do sleep 0.1; done; }
-+waitiperf() { pretty "${1//*-}" "wait for iperf:${3:-5201} pid $2"; while [[ $(ss -N "$1" -tlpH "sport = ${3:-5201}") != *\"iperf3\",pid=$2,fd=* ]]; do sleep 0.1; done; }
- waitncatudp() { pretty "${1//*-}" "wait for udp:1111 pid $2"; while [[ $(ss -N "$1" -ulpH 'sport = 1111') != *\"ncat\",pid=$2,fd=* ]]; do sleep 0.1; done; }
- waitiface() { pretty "${1//*-}" "wait for $2 to come up"; ip netns exec "$1" bash -c "while [[ \$(< \"/sys/class/net/$2/operstate\") != up ]]; do read -t .1 -N 0 || true; done;"; }
- 
-@@ -141,6 +141,19 @@ tests() {
- 	n2 iperf3 -s -1 -B fd00::2 &
- 	waitiperf $netns2 $!
- 	n1 iperf3 -Z -t 3 -b 0 -u -c fd00::2
-+
-+	# TCP over IPv4, in parallel
-+	for max in 4 5 50; do
-+		local pids=( )
-+		for ((i=0; i < max; ++i)) do
-+			n2 iperf3 -p $(( 5200 + i )) -s -1 -B 192.168.241.2 &
-+			pids+=( $! ); waitiperf $netns2 $! $(( 5200 + i ))
-+		done
-+		for ((i=0; i < max; ++i)) do
-+			n1 iperf3 -Z -t 3 -p $(( 5200 + i )) -c 192.168.241.2 &
-+		done
-+		wait "${pids[@]}"
-+	done
- }
- 
- [[ $(ip1 link show dev wg0) =~ mtu\ ([0-9]+) ]] && orig_mtu="${BASH_REMATCH[1]}"
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0120-wireguard-peer-put-frequently-used-members-above-cac.patch b/target/linux/generic/backport-5.4/080-wireguard-0120-wireguard-peer-put-frequently-used-members-above-cac.patch
deleted file mode 100644
index 69e76b96e3..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0120-wireguard-peer-put-frequently-used-members-above-cac.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Mon, 22 Feb 2021 17:25:46 +0100
-Subject: [PATCH] wireguard: peer: put frequently used members above cache
- lines
-
-commit 5a0598695634a6bb4126818902dd9140cd9df8b6 upstream.
-
-The is_dead boolean is checked for every single packet, while the
-internal_id member is used basically only for pr_debug messages. So it
-makes sense to hoist up is_dead into some space formerly unused by a
-struct hole, while demoting internal_api to below the lowest struct
-cache line.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/peer.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireguard/peer.h
-+++ b/drivers/net/wireguard/peer.h
-@@ -39,6 +39,7 @@ struct wg_peer {
- 	struct crypt_queue tx_queue, rx_queue;
- 	struct sk_buff_head staged_packet_queue;
- 	int serial_work_cpu;
-+	bool is_dead;
- 	struct noise_keypairs keypairs;
- 	struct endpoint endpoint;
- 	struct dst_cache endpoint_cache;
-@@ -61,9 +62,8 @@ struct wg_peer {
- 	struct rcu_head rcu;
- 	struct list_head peer_list;
- 	struct list_head allowedips_list;
--	u64 internal_id;
- 	struct napi_struct napi;
--	bool is_dead;
-+	u64 internal_id;
- };
- 
- struct wg_peer *wg_peer_create(struct wg_device *wg,
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0121-wireguard-device-do-not-generate-ICMP-for-non-IP-pac.patch b/target/linux/generic/backport-5.4/080-wireguard-0121-wireguard-device-do-not-generate-ICMP-for-non-IP-pac.patch
deleted file mode 100644
index 073ee9b0d5..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0121-wireguard-device-do-not-generate-ICMP-for-non-IP-pac.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Mon, 22 Feb 2021 17:25:47 +0100
-Subject: [PATCH] wireguard: device: do not generate ICMP for non-IP packets
-
-commit 99fff5264e7ab06f45b0ad60243475be0a8d0559 upstream.
-
-If skb->protocol doesn't match the actual skb->data header, it's
-probably not a good idea to pass it off to icmp{,v6}_ndo_send, which is
-expecting to reply to a valid IP packet. So this commit has that early
-mismatch case jump to a later error label.
-
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/device.c | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireguard/device.c
-+++ b/drivers/net/wireguard/device.c
-@@ -138,7 +138,7 @@ static netdev_tx_t wg_xmit(struct sk_buf
- 		else if (skb->protocol == htons(ETH_P_IPV6))
- 			net_dbg_ratelimited("%s: No peer has allowed IPs matching %pI6\n",
- 					    dev->name, &ipv6_hdr(skb)->daddr);
--		goto err;
-+		goto err_icmp;
- 	}
- 
- 	family = READ_ONCE(peer->endpoint.addr.sa_family);
-@@ -201,12 +201,13 @@ static netdev_tx_t wg_xmit(struct sk_buf
- 
- err_peer:
- 	wg_peer_put(peer);
--err:
--	++dev->stats.tx_errors;
-+err_icmp:
- 	if (skb->protocol == htons(ETH_P_IP))
- 		icmp_ndo_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0);
- 	else if (skb->protocol == htons(ETH_P_IPV6))
- 		icmpv6_ndo_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0);
-+err:
-+	++dev->stats.tx_errors;
- 	kfree_skb(skb);
- 	return ret;
- }
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0122-wireguard-queueing-get-rid-of-per-peer-ring-buffers.patch b/target/linux/generic/backport-5.4/080-wireguard-0122-wireguard-queueing-get-rid-of-per-peer-ring-buffers.patch
deleted file mode 100644
index 9dc7ddae7f..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0122-wireguard-queueing-get-rid-of-per-peer-ring-buffers.patch
+++ /dev/null
@@ -1,560 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Mon, 22 Feb 2021 17:25:48 +0100
-Subject: [PATCH] wireguard: queueing: get rid of per-peer ring buffers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-commit 8b5553ace83cced775eefd0f3f18b5c6214ccf7a upstream.
-
-Having two ring buffers per-peer means that every peer results in two
-massive ring allocations. On an 8-core x86_64 machine, this commit
-reduces the per-peer allocation from 18,688 bytes to 1,856 bytes, which
-is an 90% reduction. Ninety percent! With some single-machine
-deployments approaching 500,000 peers, we're talking about a reduction
-from 7 gigs of memory down to 700 megs of memory.
-
-In order to get rid of these per-peer allocations, this commit switches
-to using a list-based queueing approach. Currently GSO fragments are
-chained together using the skb->next pointer (the skb_list_* singly
-linked list approach), so we form the per-peer queue around the unused
-skb->prev pointer (which sort of makes sense because the links are
-pointing backwards). Use of skb_queue_* is not possible here, because
-that is based on doubly linked lists and spinlocks. Multiple cores can
-write into the queue at any given time, because its writes occur in the
-start_xmit path or in the udp_recv path. But reads happen in a single
-workqueue item per-peer, amounting to a multi-producer, single-consumer
-paradigm.
-
-The MPSC queue is implemented locklessly and never blocks. However, it
-is not linearizable (though it is serializable), with a very tight and
-unlikely race on writes, which, when hit (some tiny fraction of the
-0.15% of partial adds on a fully loaded 16-core x86_64 system), causes
-the queue reader to terminate early. However, because every packet sent
-queues up the same workqueue item after it is fully added, the worker
-resumes again, and stopping early isn't actually a problem, since at
-that point the packet wouldn't have yet been added to the encryption
-queue. These properties allow us to avoid disabling interrupts or
-spinning. The design is based on Dmitry Vyukov's algorithm [1].
-
-Performance-wise, ordinarily list-based queues aren't preferable to
-ringbuffers, because of cache misses when following pointers around.
-However, we *already* have to follow the adjacent pointers when working
-through fragments, so there shouldn't actually be any change there. A
-potential downside is that dequeueing is a bit more complicated, but the
-ptr_ring structure used prior had a spinlock when dequeueing, so all and
-all the difference appears to be a wash.
-
-Actually, from profiling, the biggest performance hit, by far, of this
-commit winds up being atomic_add_unless(count, 1, max) and atomic_
-dec(count), which account for the majority of CPU time, according to
-perf. In that sense, the previous ring buffer was superior in that it
-could check if it was full by head==tail, which the list-based approach
-cannot do.
-
-But all and all, this enables us to get massive memory savings, allowing
-WireGuard to scale for real world deployments, without taking much of a
-performance hit.
-
-[1] http://www.1024cores.net/home/lock-free-algorithms/queues/intrusive-mpsc-node-based-queue
-
-Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
-Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/device.c   | 12 ++---
- drivers/net/wireguard/device.h   | 15 +++---
- drivers/net/wireguard/peer.c     | 28 ++++-------
- drivers/net/wireguard/peer.h     |  4 +-
- drivers/net/wireguard/queueing.c | 86 +++++++++++++++++++++++++-------
- drivers/net/wireguard/queueing.h | 45 ++++++++++++-----
- drivers/net/wireguard/receive.c  | 16 +++---
- drivers/net/wireguard/send.c     | 31 ++++--------
- 8 files changed, 144 insertions(+), 93 deletions(-)
-
---- a/drivers/net/wireguard/device.c
-+++ b/drivers/net/wireguard/device.c
-@@ -235,8 +235,8 @@ static void wg_destruct(struct net_devic
- 	destroy_workqueue(wg->handshake_receive_wq);
- 	destroy_workqueue(wg->handshake_send_wq);
- 	destroy_workqueue(wg->packet_crypt_wq);
--	wg_packet_queue_free(&wg->decrypt_queue, true);
--	wg_packet_queue_free(&wg->encrypt_queue, true);
-+	wg_packet_queue_free(&wg->decrypt_queue);
-+	wg_packet_queue_free(&wg->encrypt_queue);
- 	rcu_barrier(); /* Wait for all the peers to be actually freed. */
- 	wg_ratelimiter_uninit();
- 	memzero_explicit(&wg->static_identity, sizeof(wg->static_identity));
-@@ -338,12 +338,12 @@ static int wg_newlink(struct net *src_ne
- 		goto err_destroy_handshake_send;
- 
- 	ret = wg_packet_queue_init(&wg->encrypt_queue, wg_packet_encrypt_worker,
--				   true, MAX_QUEUED_PACKETS);
-+				   MAX_QUEUED_PACKETS);
- 	if (ret < 0)
- 		goto err_destroy_packet_crypt;
- 
- 	ret = wg_packet_queue_init(&wg->decrypt_queue, wg_packet_decrypt_worker,
--				   true, MAX_QUEUED_PACKETS);
-+				   MAX_QUEUED_PACKETS);
- 	if (ret < 0)
- 		goto err_free_encrypt_queue;
- 
-@@ -368,9 +368,9 @@ static int wg_newlink(struct net *src_ne
- err_uninit_ratelimiter:
- 	wg_ratelimiter_uninit();
- err_free_decrypt_queue:
--	wg_packet_queue_free(&wg->decrypt_queue, true);
-+	wg_packet_queue_free(&wg->decrypt_queue);
- err_free_encrypt_queue:
--	wg_packet_queue_free(&wg->encrypt_queue, true);
-+	wg_packet_queue_free(&wg->encrypt_queue);
- err_destroy_packet_crypt:
- 	destroy_workqueue(wg->packet_crypt_wq);
- err_destroy_handshake_send:
---- a/drivers/net/wireguard/device.h
-+++ b/drivers/net/wireguard/device.h
-@@ -27,13 +27,14 @@ struct multicore_worker {
- 
- struct crypt_queue {
- 	struct ptr_ring ring;
--	union {
--		struct {
--			struct multicore_worker __percpu *worker;
--			int last_cpu;
--		};
--		struct work_struct work;
--	};
-+	struct multicore_worker __percpu *worker;
-+	int last_cpu;
-+};
-+
-+struct prev_queue {
-+	struct sk_buff *head, *tail, *peeked;
-+	struct { struct sk_buff *next, *prev; } empty; // Match first 2 members of struct sk_buff.
-+	atomic_t count;
- };
- 
- struct wg_device {
---- a/drivers/net/wireguard/peer.c
-+++ b/drivers/net/wireguard/peer.c
-@@ -32,27 +32,22 @@ struct wg_peer *wg_peer_create(struct wg
- 	peer = kzalloc(sizeof(*peer), GFP_KERNEL);
- 	if (unlikely(!peer))
- 		return ERR_PTR(ret);
--	peer->device = wg;
-+	if (dst_cache_init(&peer->endpoint_cache, GFP_KERNEL))
-+		goto err;
- 
-+	peer->device = wg;
- 	wg_noise_handshake_init(&peer->handshake, &wg->static_identity,
- 				public_key, preshared_key, peer);
--	if (dst_cache_init(&peer->endpoint_cache, GFP_KERNEL))
--		goto err_1;
--	if (wg_packet_queue_init(&peer->tx_queue, wg_packet_tx_worker, false,
--				 MAX_QUEUED_PACKETS))
--		goto err_2;
--	if (wg_packet_queue_init(&peer->rx_queue, NULL, false,
--				 MAX_QUEUED_PACKETS))
--		goto err_3;
--
- 	peer->internal_id = atomic64_inc_return(&peer_counter);
- 	peer->serial_work_cpu = nr_cpumask_bits;
- 	wg_cookie_init(&peer->latest_cookie);
- 	wg_timers_init(peer);
- 	wg_cookie_checker_precompute_peer_keys(peer);
- 	spin_lock_init(&peer->keypairs.keypair_update_lock);
--	INIT_WORK(&peer->transmit_handshake_work,
--		  wg_packet_handshake_send_worker);
-+	INIT_WORK(&peer->transmit_handshake_work, wg_packet_handshake_send_worker);
-+	INIT_WORK(&peer->transmit_packet_work, wg_packet_tx_worker);
-+	wg_prev_queue_init(&peer->tx_queue);
-+	wg_prev_queue_init(&peer->rx_queue);
- 	rwlock_init(&peer->endpoint_lock);
- 	kref_init(&peer->refcount);
- 	skb_queue_head_init(&peer->staged_packet_queue);
-@@ -68,11 +63,7 @@ struct wg_peer *wg_peer_create(struct wg
- 	pr_debug("%s: Peer %llu created\n", wg->dev->name, peer->internal_id);
- 	return peer;
- 
--err_3:
--	wg_packet_queue_free(&peer->tx_queue, false);
--err_2:
--	dst_cache_destroy(&peer->endpoint_cache);
--err_1:
-+err:
- 	kfree(peer);
- 	return ERR_PTR(ret);
- }
-@@ -197,8 +188,7 @@ static void rcu_release(struct rcu_head
- 	struct wg_peer *peer = container_of(rcu, struct wg_peer, rcu);
- 
- 	dst_cache_destroy(&peer->endpoint_cache);
--	wg_packet_queue_free(&peer->rx_queue, false);
--	wg_packet_queue_free(&peer->tx_queue, false);
-+	WARN_ON(wg_prev_queue_peek(&peer->tx_queue) || wg_prev_queue_peek(&peer->rx_queue));
- 
- 	/* The final zeroing takes care of clearing any remaining handshake key
- 	 * material and other potentially sensitive information.
---- a/drivers/net/wireguard/peer.h
-+++ b/drivers/net/wireguard/peer.h
-@@ -36,7 +36,7 @@ struct endpoint {
- 
- struct wg_peer {
- 	struct wg_device *device;
--	struct crypt_queue tx_queue, rx_queue;
-+	struct prev_queue tx_queue, rx_queue;
- 	struct sk_buff_head staged_packet_queue;
- 	int serial_work_cpu;
- 	bool is_dead;
-@@ -46,7 +46,7 @@ struct wg_peer {
- 	rwlock_t endpoint_lock;
- 	struct noise_handshake handshake;
- 	atomic64_t last_sent_handshake;
--	struct work_struct transmit_handshake_work, clear_peer_work;
-+	struct work_struct transmit_handshake_work, clear_peer_work, transmit_packet_work;
- 	struct cookie latest_cookie;
- 	struct hlist_node pubkey_hash;
- 	u64 rx_bytes, tx_bytes;
---- a/drivers/net/wireguard/queueing.c
-+++ b/drivers/net/wireguard/queueing.c
-@@ -9,8 +9,7 @@ struct multicore_worker __percpu *
- wg_packet_percpu_multicore_worker_alloc(work_func_t function, void *ptr)
- {
- 	int cpu;
--	struct multicore_worker __percpu *worker =
--		alloc_percpu(struct multicore_worker);
-+	struct multicore_worker __percpu *worker = alloc_percpu(struct multicore_worker);
- 
- 	if (!worker)
- 		return NULL;
-@@ -23,7 +22,7 @@ wg_packet_percpu_multicore_worker_alloc(
- }
- 
- int wg_packet_queue_init(struct crypt_queue *queue, work_func_t function,
--			 bool multicore, unsigned int len)
-+			 unsigned int len)
- {
- 	int ret;
- 
-@@ -31,25 +30,78 @@ int wg_packet_queue_init(struct crypt_qu
- 	ret = ptr_ring_init(&queue->ring, len, GFP_KERNEL);
- 	if (ret)
- 		return ret;
--	if (function) {
--		if (multicore) {
--			queue->worker = wg_packet_percpu_multicore_worker_alloc(
--				function, queue);
--			if (!queue->worker) {
--				ptr_ring_cleanup(&queue->ring, NULL);
--				return -ENOMEM;
--			}
--		} else {
--			INIT_WORK(&queue->work, function);
--		}
-+	queue->worker = wg_packet_percpu_multicore_worker_alloc(function, queue);
-+	if (!queue->worker) {
-+		ptr_ring_cleanup(&queue->ring, NULL);
-+		return -ENOMEM;
- 	}
- 	return 0;
- }
- 
--void wg_packet_queue_free(struct crypt_queue *queue, bool multicore)
-+void wg_packet_queue_free(struct crypt_queue *queue)
- {
--	if (multicore)
--		free_percpu(queue->worker);
-+	free_percpu(queue->worker);
- 	WARN_ON(!__ptr_ring_empty(&queue->ring));
- 	ptr_ring_cleanup(&queue->ring, NULL);
- }
-+
-+#define NEXT(skb) ((skb)->prev)
-+#define STUB(queue) ((struct sk_buff *)&queue->empty)
-+
-+void wg_prev_queue_init(struct prev_queue *queue)
-+{
-+	NEXT(STUB(queue)) = NULL;
-+	queue->head = queue->tail = STUB(queue);
-+	queue->peeked = NULL;
-+	atomic_set(&queue->count, 0);
-+	BUILD_BUG_ON(
-+		offsetof(struct sk_buff, next) != offsetof(struct prev_queue, empty.next) -
-+							offsetof(struct prev_queue, empty) ||
-+		offsetof(struct sk_buff, prev) != offsetof(struct prev_queue, empty.prev) -
-+							 offsetof(struct prev_queue, empty));
-+}
-+
-+static void __wg_prev_queue_enqueue(struct prev_queue *queue, struct sk_buff *skb)
-+{
-+	WRITE_ONCE(NEXT(skb), NULL);
-+	WRITE_ONCE(NEXT(xchg_release(&queue->head, skb)), skb);
-+}
-+
-+bool wg_prev_queue_enqueue(struct prev_queue *queue, struct sk_buff *skb)
-+{
-+	if (!atomic_add_unless(&queue->count, 1, MAX_QUEUED_PACKETS))
-+		return false;
-+	__wg_prev_queue_enqueue(queue, skb);
-+	return true;
-+}
-+
-+struct sk_buff *wg_prev_queue_dequeue(struct prev_queue *queue)
-+{
-+	struct sk_buff *tail = queue->tail, *next = smp_load_acquire(&NEXT(tail));
-+
-+	if (tail == STUB(queue)) {
-+		if (!next)
-+			return NULL;
-+		queue->tail = next;
-+		tail = next;
-+		next = smp_load_acquire(&NEXT(next));
-+	}
-+	if (next) {
-+		queue->tail = next;
-+		atomic_dec(&queue->count);
-+		return tail;
-+	}
-+	if (tail != READ_ONCE(queue->head))
-+		return NULL;
-+	__wg_prev_queue_enqueue(queue, STUB(queue));
-+	next = smp_load_acquire(&NEXT(tail));
-+	if (next) {
-+		queue->tail = next;
-+		atomic_dec(&queue->count);
-+		return tail;
-+	}
-+	return NULL;
-+}
-+
-+#undef NEXT
-+#undef STUB
---- a/drivers/net/wireguard/queueing.h
-+++ b/drivers/net/wireguard/queueing.h
-@@ -17,12 +17,13 @@ struct wg_device;
- struct wg_peer;
- struct multicore_worker;
- struct crypt_queue;
-+struct prev_queue;
- struct sk_buff;
- 
- /* queueing.c APIs: */
- int wg_packet_queue_init(struct crypt_queue *queue, work_func_t function,
--			 bool multicore, unsigned int len);
--void wg_packet_queue_free(struct crypt_queue *queue, bool multicore);
-+			 unsigned int len);
-+void wg_packet_queue_free(struct crypt_queue *queue);
- struct multicore_worker __percpu *
- wg_packet_percpu_multicore_worker_alloc(work_func_t function, void *ptr);
- 
-@@ -135,8 +136,31 @@ static inline int wg_cpumask_next_online
- 	return cpu;
- }
- 
-+void wg_prev_queue_init(struct prev_queue *queue);
-+
-+/* Multi producer */
-+bool wg_prev_queue_enqueue(struct prev_queue *queue, struct sk_buff *skb);
-+
-+/* Single consumer */
-+struct sk_buff *wg_prev_queue_dequeue(struct prev_queue *queue);
-+
-+/* Single consumer */
-+static inline struct sk_buff *wg_prev_queue_peek(struct prev_queue *queue)
-+{
-+	if (queue->peeked)
-+		return queue->peeked;
-+	queue->peeked = wg_prev_queue_dequeue(queue);
-+	return queue->peeked;
-+}
-+
-+/* Single consumer */
-+static inline void wg_prev_queue_drop_peeked(struct prev_queue *queue)
-+{
-+	queue->peeked = NULL;
-+}
-+
- static inline int wg_queue_enqueue_per_device_and_peer(
--	struct crypt_queue *device_queue, struct crypt_queue *peer_queue,
-+	struct crypt_queue *device_queue, struct prev_queue *peer_queue,
- 	struct sk_buff *skb, struct workqueue_struct *wq, int *next_cpu)
- {
- 	int cpu;
-@@ -145,8 +169,9 @@ static inline int wg_queue_enqueue_per_d
- 	/* We first queue this up for the peer ingestion, but the consumer
- 	 * will wait for the state to change to CRYPTED or DEAD before.
- 	 */
--	if (unlikely(ptr_ring_produce_bh(&peer_queue->ring, skb)))
-+	if (unlikely(!wg_prev_queue_enqueue(peer_queue, skb)))
- 		return -ENOSPC;
-+
- 	/* Then we queue it up in the device queue, which consumes the
- 	 * packet as soon as it can.
- 	 */
-@@ -157,9 +182,7 @@ static inline int wg_queue_enqueue_per_d
- 	return 0;
- }
- 
--static inline void wg_queue_enqueue_per_peer(struct crypt_queue *queue,
--					     struct sk_buff *skb,
--					     enum packet_state state)
-+static inline void wg_queue_enqueue_per_peer_tx(struct sk_buff *skb, enum packet_state state)
- {
- 	/* We take a reference, because as soon as we call atomic_set, the
- 	 * peer can be freed from below us.
-@@ -167,14 +190,12 @@ static inline void wg_queue_enqueue_per_
- 	struct wg_peer *peer = wg_peer_get(PACKET_PEER(skb));
- 
- 	atomic_set_release(&PACKET_CB(skb)->state, state);
--	queue_work_on(wg_cpumask_choose_online(&peer->serial_work_cpu,
--					       peer->internal_id),
--		      peer->device->packet_crypt_wq, &queue->work);
-+	queue_work_on(wg_cpumask_choose_online(&peer->serial_work_cpu, peer->internal_id),
-+		      peer->device->packet_crypt_wq, &peer->transmit_packet_work);
- 	wg_peer_put(peer);
- }
- 
--static inline void wg_queue_enqueue_per_peer_napi(struct sk_buff *skb,
--						  enum packet_state state)
-+static inline void wg_queue_enqueue_per_peer_rx(struct sk_buff *skb, enum packet_state state)
- {
- 	/* We take a reference, because as soon as we call atomic_set, the
- 	 * peer can be freed from below us.
---- a/drivers/net/wireguard/receive.c
-+++ b/drivers/net/wireguard/receive.c
-@@ -444,7 +444,6 @@ packet_processed:
- int wg_packet_rx_poll(struct napi_struct *napi, int budget)
- {
- 	struct wg_peer *peer = container_of(napi, struct wg_peer, napi);
--	struct crypt_queue *queue = &peer->rx_queue;
- 	struct noise_keypair *keypair;
- 	struct endpoint endpoint;
- 	enum packet_state state;
-@@ -455,11 +454,10 @@ int wg_packet_rx_poll(struct napi_struct
- 	if (unlikely(budget <= 0))
- 		return 0;
- 
--	while ((skb = __ptr_ring_peek(&queue->ring)) != NULL &&
-+	while ((skb = wg_prev_queue_peek(&peer->rx_queue)) != NULL &&
- 	       (state = atomic_read_acquire(&PACKET_CB(skb)->state)) !=
- 		       PACKET_STATE_UNCRYPTED) {
--		__ptr_ring_discard_one(&queue->ring);
--		peer = PACKET_PEER(skb);
-+		wg_prev_queue_drop_peeked(&peer->rx_queue);
- 		keypair = PACKET_CB(skb)->keypair;
- 		free = true;
- 
-@@ -508,7 +506,7 @@ void wg_packet_decrypt_worker(struct wor
- 		enum packet_state state =
- 			likely(decrypt_packet(skb, PACKET_CB(skb)->keypair)) ?
- 				PACKET_STATE_CRYPTED : PACKET_STATE_DEAD;
--		wg_queue_enqueue_per_peer_napi(skb, state);
-+		wg_queue_enqueue_per_peer_rx(skb, state);
- 		if (need_resched())
- 			cond_resched();
- 	}
-@@ -531,12 +529,10 @@ static void wg_packet_consume_data(struc
- 	if (unlikely(READ_ONCE(peer->is_dead)))
- 		goto err;
- 
--	ret = wg_queue_enqueue_per_device_and_peer(&wg->decrypt_queue,
--						   &peer->rx_queue, skb,
--						   wg->packet_crypt_wq,
--						   &wg->decrypt_queue.last_cpu);
-+	ret = wg_queue_enqueue_per_device_and_peer(&wg->decrypt_queue, &peer->rx_queue, skb,
-+						   wg->packet_crypt_wq, &wg->decrypt_queue.last_cpu);
- 	if (unlikely(ret == -EPIPE))
--		wg_queue_enqueue_per_peer_napi(skb, PACKET_STATE_DEAD);
-+		wg_queue_enqueue_per_peer_rx(skb, PACKET_STATE_DEAD);
- 	if (likely(!ret || ret == -EPIPE)) {
- 		rcu_read_unlock_bh();
- 		return;
---- a/drivers/net/wireguard/send.c
-+++ b/drivers/net/wireguard/send.c
-@@ -239,8 +239,7 @@ void wg_packet_send_keepalive(struct wg_
- 	wg_packet_send_staged_packets(peer);
- }
- 
--static void wg_packet_create_data_done(struct sk_buff *first,
--				       struct wg_peer *peer)
-+static void wg_packet_create_data_done(struct wg_peer *peer, struct sk_buff *first)
- {
- 	struct sk_buff *skb, *next;
- 	bool is_keepalive, data_sent = false;
-@@ -262,22 +261,19 @@ static void wg_packet_create_data_done(s
- 
- void wg_packet_tx_worker(struct work_struct *work)
- {
--	struct crypt_queue *queue = container_of(work, struct crypt_queue,
--						 work);
-+	struct wg_peer *peer = container_of(work, struct wg_peer, transmit_packet_work);
- 	struct noise_keypair *keypair;
- 	enum packet_state state;
- 	struct sk_buff *first;
--	struct wg_peer *peer;
- 
--	while ((first = __ptr_ring_peek(&queue->ring)) != NULL &&
-+	while ((first = wg_prev_queue_peek(&peer->tx_queue)) != NULL &&
- 	       (state = atomic_read_acquire(&PACKET_CB(first)->state)) !=
- 		       PACKET_STATE_UNCRYPTED) {
--		__ptr_ring_discard_one(&queue->ring);
--		peer = PACKET_PEER(first);
-+		wg_prev_queue_drop_peeked(&peer->tx_queue);
- 		keypair = PACKET_CB(first)->keypair;
- 
- 		if (likely(state == PACKET_STATE_CRYPTED))
--			wg_packet_create_data_done(first, peer);
-+			wg_packet_create_data_done(peer, first);
- 		else
- 			kfree_skb_list(first);
- 
-@@ -306,16 +302,14 @@ void wg_packet_encrypt_worker(struct wor
- 				break;
- 			}
- 		}
--		wg_queue_enqueue_per_peer(&PACKET_PEER(first)->tx_queue, first,
--					  state);
-+		wg_queue_enqueue_per_peer_tx(first, state);
- 		if (need_resched())
- 			cond_resched();
- 	}
- }
- 
--static void wg_packet_create_data(struct sk_buff *first)
-+static void wg_packet_create_data(struct wg_peer *peer, struct sk_buff *first)
- {
--	struct wg_peer *peer = PACKET_PEER(first);
- 	struct wg_device *wg = peer->device;
- 	int ret = -EINVAL;
- 
-@@ -323,13 +317,10 @@ static void wg_packet_create_data(struct
- 	if (unlikely(READ_ONCE(peer->is_dead)))
- 		goto err;
- 
--	ret = wg_queue_enqueue_per_device_and_peer(&wg->encrypt_queue,
--						   &peer->tx_queue, first,
--						   wg->packet_crypt_wq,
--						   &wg->encrypt_queue.last_cpu);
-+	ret = wg_queue_enqueue_per_device_and_peer(&wg->encrypt_queue, &peer->tx_queue, first,
-+						   wg->packet_crypt_wq, &wg->encrypt_queue.last_cpu);
- 	if (unlikely(ret == -EPIPE))
--		wg_queue_enqueue_per_peer(&peer->tx_queue, first,
--					  PACKET_STATE_DEAD);
-+		wg_queue_enqueue_per_peer_tx(first, PACKET_STATE_DEAD);
- err:
- 	rcu_read_unlock_bh();
- 	if (likely(!ret || ret == -EPIPE))
-@@ -393,7 +384,7 @@ void wg_packet_send_staged_packets(struc
- 	packets.prev->next = NULL;
- 	wg_peer_get(keypair->entry.peer);
- 	PACKET_CB(packets.next)->keypair = keypair;
--	wg_packet_create_data(packets.next);
-+	wg_packet_create_data(peer, packets.next);
- 	return;
- 
- out_invalid:
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0123-wireguard-kconfig-use-arm-chacha-even-with-no-neon.patch b/target/linux/generic/backport-5.4/080-wireguard-0123-wireguard-kconfig-use-arm-chacha-even-with-no-neon.patch
deleted file mode 100644
index 9a251492c2..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0123-wireguard-kconfig-use-arm-chacha-even-with-no-neon.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Mon, 22 Feb 2021 17:25:49 +0100
-Subject: [PATCH] wireguard: kconfig: use arm chacha even with no neon
-
-commit bce2473927af8de12ad131a743f55d69d358c0b9 upstream.
-
-The condition here was incorrect: a non-neon fallback implementation is
-available on arm32 when NEON is not supported.
-
-Reported-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -87,7 +87,7 @@ config WIREGUARD
- 	select CRYPTO_CURVE25519_X86 if X86 && 64BIT
- 	select ARM_CRYPTO if ARM
- 	select ARM64_CRYPTO if ARM64
--	select CRYPTO_CHACHA20_NEON if (ARM || ARM64) && KERNEL_MODE_NEON
-+	select CRYPTO_CHACHA20_NEON if ARM || (ARM64 && KERNEL_MODE_NEON)
- 	select CRYPTO_POLY1305_NEON if ARM64 && KERNEL_MODE_NEON
- 	select CRYPTO_POLY1305_ARM if ARM
- 	select CRYPTO_CURVE25519_NEON if ARM && KERNEL_MODE_NEON
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0124-crypto-mips-poly1305-enable-for-all-MIPS-processors.patch b/target/linux/generic/backport-5.4/080-wireguard-0124-crypto-mips-poly1305-enable-for-all-MIPS-processors.patch
deleted file mode 100644
index c0ee841b02..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0124-crypto-mips-poly1305-enable-for-all-MIPS-processors.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Maciej W. Rozycki" <macro@orcam.me.uk>
-Date: Thu, 11 Mar 2021 21:50:47 -0700
-Subject: [PATCH] crypto: mips/poly1305 - enable for all MIPS processors
-
-commit 6c810cf20feef0d4338e9b424ab7f2644a8b353e upstream.
-
-The MIPS Poly1305 implementation is generic MIPS code written such as to
-support down to the original MIPS I and MIPS III ISA for the 32-bit and
-64-bit variant respectively.  Lift the current limitation then to enable
-code for MIPSr1 ISA or newer processors only and have it available for
-all MIPS processors.
-
-Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
-Fixes: a11d055e7a64 ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation")
-Cc: stable@vger.kernel.org # v5.5+
-Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/mips/crypto/Makefile | 4 ++--
- crypto/Kconfig            | 2 +-
- drivers/net/Kconfig       | 2 +-
- 3 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/mips/crypto/Makefile
-+++ b/arch/mips/crypto/Makefile
-@@ -12,8 +12,8 @@ AFLAGS_chacha-core.o += -O2 # needed to
- obj-$(CONFIG_CRYPTO_POLY1305_MIPS) += poly1305-mips.o
- poly1305-mips-y := poly1305-core.o poly1305-glue.o
- 
--perlasm-flavour-$(CONFIG_CPU_MIPS32) := o32
--perlasm-flavour-$(CONFIG_CPU_MIPS64) := 64
-+perlasm-flavour-$(CONFIG_32BIT) := o32
-+perlasm-flavour-$(CONFIG_64BIT) := 64
- 
- quiet_cmd_perlasm = PERLASM $@
-       cmd_perlasm = $(PERL) $(<) $(perlasm-flavour-y) $(@)
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -740,7 +740,7 @@ config CRYPTO_POLY1305_X86_64
- 
- config CRYPTO_POLY1305_MIPS
- 	tristate "Poly1305 authenticator algorithm (MIPS optimized)"
--	depends on CPU_MIPS32 || (CPU_MIPS64 && 64BIT)
-+	depends on MIPS
- 	select CRYPTO_ARCH_HAVE_LIB_POLY1305
- 
- config CRYPTO_MD4
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -92,7 +92,7 @@ config WIREGUARD
- 	select CRYPTO_POLY1305_ARM if ARM
- 	select CRYPTO_CURVE25519_NEON if ARM && KERNEL_MODE_NEON
- 	select CRYPTO_CHACHA_MIPS if CPU_MIPS32_R2
--	select CRYPTO_POLY1305_MIPS if CPU_MIPS32 || (CPU_MIPS64 && 64BIT)
-+	select CRYPTO_POLY1305_MIPS if MIPS
- 	help
- 	  WireGuard is a secure, fast, and easy to use replacement for IPSec
- 	  that uses modern cryptography and clever networking tricks. It's
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0125-crypto-mips-add-poly1305-core.S-to-.gitignore.patch b/target/linux/generic/backport-5.4/080-wireguard-0125-crypto-mips-add-poly1305-core.S-to-.gitignore.patch
deleted file mode 100644
index 856d67d5b8..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0125-crypto-mips-add-poly1305-core.S-to-.gitignore.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Date: Sat, 27 Mar 2021 19:39:43 -0700
-Subject: [PATCH] crypto: mips: add poly1305-core.S to .gitignore
-
-commit dc92d0df51dc61de88bf6f4884a17bf73d5c6326 upstream.
-
-poly1305-core.S is an auto-generated file, so it should be ignored.
-
-Fixes: a11d055e7a64 ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation")
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Cc: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/mips/crypto/.gitignore | 2 ++
- 1 file changed, 2 insertions(+)
- create mode 100644 arch/mips/crypto/.gitignore
-
---- /dev/null
-+++ b/arch/mips/crypto/.gitignore
-@@ -0,0 +1,2 @@
-+# SPDX-License-Identifier: GPL-2.0-only
-+poly1305-core.S
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0126-crypto-poly1305-fix-poly1305_core_setkey-declaration.patch b/target/linux/generic/backport-5.4/080-wireguard-0126-crypto-poly1305-fix-poly1305_core_setkey-declaration.patch
deleted file mode 100644
index ded6625aeb..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0126-crypto-poly1305-fix-poly1305_core_setkey-declaration.patch
+++ /dev/null
@@ -1,172 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Mon, 22 Mar 2021 18:05:15 +0100
-Subject: [PATCH] crypto: poly1305 - fix poly1305_core_setkey() declaration
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-commit 8d195e7a8ada68928f2aedb2c18302a4518fe68e upstream.
-
-gcc-11 points out a mismatch between the declaration and the definition
-of poly1305_core_setkey():
-
-lib/crypto/poly1305-donna32.c:13:67: error: argument 2 of type ‘const u8[16]’ {aka ‘const unsigned char[16]’} with mismatched bound [-Werror=array-parameter=]
-   13 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
-      |                                                          ~~~~~~~~~^~~~~~~~~~~
-In file included from lib/crypto/poly1305-donna32.c:11:
-include/crypto/internal/poly1305.h:21:68: note: previously declared as ‘const u8 *’ {aka ‘const unsigned char *’}
-   21 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 *raw_key);
-
-This is harmless in principle, as the calling conventions are the same,
-but the more specific prototype allows better type checking in the
-caller.
-
-Change the declaration to match the actual function definition.
-The poly1305_simd_init() is a bit suspicious here, as it previously
-had a 32-byte argument type, but looks like it needs to take the
-16-byte POLY1305_BLOCK_SIZE array instead.
-
-Fixes: 1c08a104360f ("crypto: poly1305 - add new 32 and 64-bit generic versions")
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
-Reviewed-by: Eric Biggers <ebiggers@google.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/poly1305-glue.c    | 2 +-
- arch/arm64/crypto/poly1305-glue.c  | 2 +-
- arch/mips/crypto/poly1305-glue.c   | 2 +-
- arch/x86/crypto/poly1305_glue.c    | 6 +++---
- include/crypto/internal/poly1305.h | 3 ++-
- include/crypto/poly1305.h          | 6 ++++--
- lib/crypto/poly1305-donna32.c      | 3 ++-
- lib/crypto/poly1305-donna64.c      | 3 ++-
- lib/crypto/poly1305.c              | 3 ++-
- 9 files changed, 18 insertions(+), 12 deletions(-)
-
---- a/arch/arm/crypto/poly1305-glue.c
-+++ b/arch/arm/crypto/poly1305-glue.c
-@@ -29,7 +29,7 @@ void __weak poly1305_blocks_neon(void *s
- 
- static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
- 
--void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
-+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
- {
- 	poly1305_init_arm(&dctx->h, key);
- 	dctx->s[0] = get_unaligned_le32(key + 16);
---- a/arch/arm64/crypto/poly1305-glue.c
-+++ b/arch/arm64/crypto/poly1305-glue.c
-@@ -25,7 +25,7 @@ asmlinkage void poly1305_emit(void *stat
- 
- static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
- 
--void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
-+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
- {
- 	poly1305_init_arm64(&dctx->h, key);
- 	dctx->s[0] = get_unaligned_le32(key + 16);
---- a/arch/mips/crypto/poly1305-glue.c
-+++ b/arch/mips/crypto/poly1305-glue.c
-@@ -17,7 +17,7 @@ asmlinkage void poly1305_init_mips(void
- asmlinkage void poly1305_blocks_mips(void *state, const u8 *src, u32 len, u32 hibit);
- asmlinkage void poly1305_emit_mips(void *state, u8 *digest, const u32 *nonce);
- 
--void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
-+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
- {
- 	poly1305_init_mips(&dctx->h, key);
- 	dctx->s[0] = get_unaligned_le32(key + 16);
---- a/arch/x86/crypto/poly1305_glue.c
-+++ b/arch/x86/crypto/poly1305_glue.c
-@@ -15,7 +15,7 @@
- #include <asm/simd.h>
- 
- asmlinkage void poly1305_init_x86_64(void *ctx,
--				     const u8 key[POLY1305_KEY_SIZE]);
-+				     const u8 key[POLY1305_BLOCK_SIZE]);
- asmlinkage void poly1305_blocks_x86_64(void *ctx, const u8 *inp,
- 				       const size_t len, const u32 padbit);
- asmlinkage void poly1305_emit_x86_64(void *ctx, u8 mac[POLY1305_DIGEST_SIZE],
-@@ -80,7 +80,7 @@ static void convert_to_base2_64(void *ct
- 	state->is_base2_26 = 0;
- }
- 
--static void poly1305_simd_init(void *ctx, const u8 key[POLY1305_KEY_SIZE])
-+static void poly1305_simd_init(void *ctx, const u8 key[POLY1305_BLOCK_SIZE])
- {
- 	poly1305_init_x86_64(ctx, key);
- }
-@@ -128,7 +128,7 @@ static void poly1305_simd_emit(void *ctx
- 		poly1305_emit_avx(ctx, mac, nonce);
- }
- 
--void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
-+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
- {
- 	poly1305_simd_init(&dctx->h, key);
- 	dctx->s[0] = get_unaligned_le32(&key[16]);
---- a/include/crypto/internal/poly1305.h
-+++ b/include/crypto/internal/poly1305.h
-@@ -18,7 +18,8 @@
-  * only the ε-almost-∆-universal hash function (not the full MAC) is computed.
-  */
- 
--void poly1305_core_setkey(struct poly1305_core_key *key, const u8 *raw_key);
-+void poly1305_core_setkey(struct poly1305_core_key *key,
-+			  const u8 raw_key[POLY1305_BLOCK_SIZE]);
- static inline void poly1305_core_init(struct poly1305_state *state)
- {
- 	*state = (struct poly1305_state){};
---- a/include/crypto/poly1305.h
-+++ b/include/crypto/poly1305.h
-@@ -58,8 +58,10 @@ struct poly1305_desc_ctx {
- 	};
- };
- 
--void poly1305_init_arch(struct poly1305_desc_ctx *desc, const u8 *key);
--void poly1305_init_generic(struct poly1305_desc_ctx *desc, const u8 *key);
-+void poly1305_init_arch(struct poly1305_desc_ctx *desc,
-+			const u8 key[POLY1305_KEY_SIZE]);
-+void poly1305_init_generic(struct poly1305_desc_ctx *desc,
-+			   const u8 key[POLY1305_KEY_SIZE]);
- 
- static inline void poly1305_init(struct poly1305_desc_ctx *desc, const u8 *key)
- {
---- a/lib/crypto/poly1305-donna32.c
-+++ b/lib/crypto/poly1305-donna32.c
-@@ -10,7 +10,8 @@
- #include <asm/unaligned.h>
- #include <crypto/internal/poly1305.h>
- 
--void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
-+void poly1305_core_setkey(struct poly1305_core_key *key,
-+			  const u8 raw_key[POLY1305_BLOCK_SIZE])
- {
- 	/* r &= 0xffffffc0ffffffc0ffffffc0fffffff */
- 	key->key.r[0] = (get_unaligned_le32(&raw_key[0])) & 0x3ffffff;
---- a/lib/crypto/poly1305-donna64.c
-+++ b/lib/crypto/poly1305-donna64.c
-@@ -12,7 +12,8 @@
- 
- typedef __uint128_t u128;
- 
--void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
-+void poly1305_core_setkey(struct poly1305_core_key *key,
-+			  const u8 raw_key[POLY1305_BLOCK_SIZE])
- {
- 	u64 t0, t1;
- 
---- a/lib/crypto/poly1305.c
-+++ b/lib/crypto/poly1305.c
-@@ -12,7 +12,8 @@
- #include <linux/module.h>
- #include <asm/unaligned.h>
- 
--void poly1305_init_generic(struct poly1305_desc_ctx *desc, const u8 *key)
-+void poly1305_init_generic(struct poly1305_desc_ctx *desc,
-+			   const u8 key[POLY1305_KEY_SIZE])
- {
- 	poly1305_core_setkey(&desc->core_r, key);
- 	desc->s[0] = get_unaligned_le32(key + 16);
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0127-wireguard-selftests-remove-old-conntrack-kconfig-val.patch b/target/linux/generic/backport-5.4/080-wireguard-0127-wireguard-selftests-remove-old-conntrack-kconfig-val.patch
deleted file mode 100644
index 3e7d1a8e02..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0127-wireguard-selftests-remove-old-conntrack-kconfig-val.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 4 Jun 2021 17:17:30 +0200
-Subject: [PATCH] wireguard: selftests: remove old conntrack kconfig value
-
-commit acf2492b51c9a3c4dfb947f4d3477a86d315150f upstream.
-
-On recent kernels, this config symbol is no longer used.
-
-Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Cc: stable@vger.kernel.org
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- tools/testing/selftests/wireguard/qemu/kernel.config | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/tools/testing/selftests/wireguard/qemu/kernel.config
-+++ b/tools/testing/selftests/wireguard/qemu/kernel.config
-@@ -19,7 +19,6 @@ CONFIG_NETFILTER_XTABLES=y
- CONFIG_NETFILTER_XT_NAT=y
- CONFIG_NETFILTER_XT_MATCH_LENGTH=y
- CONFIG_NETFILTER_XT_MARK=y
--CONFIG_NF_CONNTRACK_IPV4=y
- CONFIG_NF_NAT_IPV4=y
- CONFIG_IP_NF_IPTABLES=y
- CONFIG_IP_NF_FILTER=y
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0128-wireguard-selftests-make-sure-rp_filter-is-disabled-.patch b/target/linux/generic/backport-5.4/080-wireguard-0128-wireguard-selftests-make-sure-rp_filter-is-disabled-.patch
deleted file mode 100644
index 22d0f3e32e..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0128-wireguard-selftests-make-sure-rp_filter-is-disabled-.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 4 Jun 2021 17:17:31 +0200
-Subject: [PATCH] wireguard: selftests: make sure rp_filter is disabled on
- vethc
-
-commit f8873d11d4121aad35024f9379e431e0c83abead upstream.
-
-Some distros may enable strict rp_filter by default, which will prevent
-vethc from receiving the packets with an unrouteable reverse path address.
-
-Reported-by: Hangbin Liu <liuhangbin@gmail.com>
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Cc: stable@vger.kernel.org
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- tools/testing/selftests/wireguard/netns.sh | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/tools/testing/selftests/wireguard/netns.sh
-+++ b/tools/testing/selftests/wireguard/netns.sh
-@@ -363,6 +363,7 @@ ip1 -6 rule add table main suppress_pref
- ip1 -4 route add default dev wg0 table 51820
- ip1 -4 rule add not fwmark 51820 table 51820
- ip1 -4 rule add table main suppress_prefixlength 0
-+n1 bash -c 'printf 0 > /proc/sys/net/ipv4/conf/vethc/rp_filter'
- # Flood the pings instead of sending just one, to trigger routing table reference counting bugs.
- n1 ping -W 1 -c 100 -f 192.168.99.7
- n1 ping -W 1 -c 100 -f abab::1111
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0129-wireguard-do-not-use-O3.patch b/target/linux/generic/backport-5.4/080-wireguard-0129-wireguard-do-not-use-O3.patch
deleted file mode 100644
index a7890a7384..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0129-wireguard-do-not-use-O3.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 4 Jun 2021 17:17:32 +0200
-Subject: [PATCH] wireguard: do not use -O3
-
-commit cc5060ca0285efe2728bced399a1955a7ce808b2 upstream.
-
-Apparently, various versions of gcc have O3-related miscompiles. Looking
-at the difference between -O2 and -O3 for gcc 11 doesn't indicate
-miscompiles, but the difference also doesn't seem so significant for
-performance that it's worth risking.
-
-Link: https://lore.kernel.org/lkml/CAHk-=wjuoGyxDhAF8SsrTkN0-YfCx7E6jUN3ikC_tn2AKWTTsA@mail.gmail.com/
-Link: https://lore.kernel.org/lkml/CAHmME9otB5Wwxp7H8bR_i2uH2esEMvoBMC8uEXBMH9p0q1s6Bw@mail.gmail.com/
-Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Cc: stable@vger.kernel.org
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/Makefile | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/net/wireguard/Makefile
-+++ b/drivers/net/wireguard/Makefile
-@@ -1,5 +1,4 @@
--ccflags-y := -O3
--ccflags-y += -D'pr_fmt(fmt)=KBUILD_MODNAME ": " fmt'
-+ccflags-y := -D'pr_fmt(fmt)=KBUILD_MODNAME ": " fmt'
- ccflags-$(CONFIG_WIREGUARD_DEBUG) += -DDEBUG
- wireguard-y := main.o
- wireguard-y += noise.o
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0130-wireguard-use-synchronize_net-rather-than-synchroniz.patch b/target/linux/generic/backport-5.4/080-wireguard-0130-wireguard-use-synchronize_net-rather-than-synchroniz.patch
deleted file mode 100644
index 309fe36198..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0130-wireguard-use-synchronize_net-rather-than-synchroniz.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 4 Jun 2021 17:17:33 +0200
-Subject: [PATCH] wireguard: use synchronize_net rather than synchronize_rcu
-
-commit 24b70eeeb4f46c09487f8155239ebfb1f875774a upstream.
-
-Many of the synchronization points are sometimes called under the rtnl
-lock, which means we should use synchronize_net rather than
-synchronize_rcu. Under the hood, this expands to using the expedited
-flavor of function in the event that rtnl is held, in order to not stall
-other concurrent changes.
-
-This fixes some very, very long delays when removing multiple peers at
-once, which would cause some operations to take several minutes.
-
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Cc: stable@vger.kernel.org
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/peer.c   | 6 +++---
- drivers/net/wireguard/socket.c | 2 +-
- 2 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/wireguard/peer.c
-+++ b/drivers/net/wireguard/peer.c
-@@ -88,7 +88,7 @@ static void peer_make_dead(struct wg_pee
- 	/* Mark as dead, so that we don't allow jumping contexts after. */
- 	WRITE_ONCE(peer->is_dead, true);
- 
--	/* The caller must now synchronize_rcu() for this to take effect. */
-+	/* The caller must now synchronize_net() for this to take effect. */
- }
- 
- static void peer_remove_after_dead(struct wg_peer *peer)
-@@ -160,7 +160,7 @@ void wg_peer_remove(struct wg_peer *peer
- 	lockdep_assert_held(&peer->device->device_update_lock);
- 
- 	peer_make_dead(peer);
--	synchronize_rcu();
-+	synchronize_net();
- 	peer_remove_after_dead(peer);
- }
- 
-@@ -178,7 +178,7 @@ void wg_peer_remove_all(struct wg_device
- 		peer_make_dead(peer);
- 		list_add_tail(&peer->peer_list, &dead_peers);
- 	}
--	synchronize_rcu();
-+	synchronize_net();
- 	list_for_each_entry_safe(peer, temp, &dead_peers, peer_list)
- 		peer_remove_after_dead(peer);
- }
---- a/drivers/net/wireguard/socket.c
-+++ b/drivers/net/wireguard/socket.c
-@@ -430,7 +430,7 @@ void wg_socket_reinit(struct wg_device *
- 	if (new4)
- 		wg->incoming_port = ntohs(inet_sk(new4)->inet_sport);
- 	mutex_unlock(&wg->socket_update_lock);
--	synchronize_rcu();
-+	synchronize_net();
- 	sock_free(old4);
- 	sock_free(old6);
- }
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0131-wireguard-peer-allocate-in-kmem_cache.patch b/target/linux/generic/backport-5.4/080-wireguard-0131-wireguard-peer-allocate-in-kmem_cache.patch
deleted file mode 100644
index 32ae327037..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0131-wireguard-peer-allocate-in-kmem_cache.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 4 Jun 2021 17:17:34 +0200
-Subject: [PATCH] wireguard: peer: allocate in kmem_cache
-
-commit a4e9f8e3287c9eb6bf70df982870980dd3341863 upstream.
-
-With deployments having upwards of 600k peers now, this somewhat heavy
-structure could benefit from more fine-grained allocations.
-Specifically, instead of using a 2048-byte slab for a 1544-byte object,
-we can now use 1544-byte objects directly, thus saving almost 25%
-per-peer, or with 600k peers, that's a savings of 303 MiB. This also
-makes wireguard's memory usage more transparent in tools like slabtop
-and /proc/slabinfo.
-
-Fixes: 8b5553ace83c ("wireguard: queueing: get rid of per-peer ring buffers")
-Suggested-by: Arnd Bergmann <arnd@arndb.de>
-Suggested-by: Matthew Wilcox <willy@infradead.org>
-Cc: stable@vger.kernel.org
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/main.c |  7 +++++++
- drivers/net/wireguard/peer.c | 21 +++++++++++++++++----
- drivers/net/wireguard/peer.h |  3 +++
- 3 files changed, 27 insertions(+), 4 deletions(-)
-
---- a/drivers/net/wireguard/main.c
-+++ b/drivers/net/wireguard/main.c
-@@ -28,6 +28,10 @@ static int __init mod_init(void)
- #endif
- 	wg_noise_init();
- 
-+	ret = wg_peer_init();
-+	if (ret < 0)
-+		goto err_peer;
-+
- 	ret = wg_device_init();
- 	if (ret < 0)
- 		goto err_device;
-@@ -44,6 +48,8 @@ static int __init mod_init(void)
- err_netlink:
- 	wg_device_uninit();
- err_device:
-+	wg_peer_uninit();
-+err_peer:
- 	return ret;
- }
- 
-@@ -51,6 +57,7 @@ static void __exit mod_exit(void)
- {
- 	wg_genetlink_uninit();
- 	wg_device_uninit();
-+	wg_peer_uninit();
- }
- 
- module_init(mod_init);
---- a/drivers/net/wireguard/peer.c
-+++ b/drivers/net/wireguard/peer.c
-@@ -15,6 +15,7 @@
- #include <linux/rcupdate.h>
- #include <linux/list.h>
- 
-+static struct kmem_cache *peer_cache;
- static atomic64_t peer_counter = ATOMIC64_INIT(0);
- 
- struct wg_peer *wg_peer_create(struct wg_device *wg,
-@@ -29,10 +30,10 @@ struct wg_peer *wg_peer_create(struct wg
- 	if (wg->num_peers >= MAX_PEERS_PER_DEVICE)
- 		return ERR_PTR(ret);
- 
--	peer = kzalloc(sizeof(*peer), GFP_KERNEL);
-+	peer = kmem_cache_zalloc(peer_cache, GFP_KERNEL);
- 	if (unlikely(!peer))
- 		return ERR_PTR(ret);
--	if (dst_cache_init(&peer->endpoint_cache, GFP_KERNEL))
-+	if (unlikely(dst_cache_init(&peer->endpoint_cache, GFP_KERNEL)))
- 		goto err;
- 
- 	peer->device = wg;
-@@ -64,7 +65,7 @@ struct wg_peer *wg_peer_create(struct wg
- 	return peer;
- 
- err:
--	kfree(peer);
-+	kmem_cache_free(peer_cache, peer);
- 	return ERR_PTR(ret);
- }
- 
-@@ -193,7 +194,8 @@ static void rcu_release(struct rcu_head
- 	/* The final zeroing takes care of clearing any remaining handshake key
- 	 * material and other potentially sensitive information.
- 	 */
--	kzfree(peer);
-+	memzero_explicit(peer, sizeof(*peer));
-+	kmem_cache_free(peer_cache, peer);
- }
- 
- static void kref_release(struct kref *refcount)
-@@ -225,3 +227,14 @@ void wg_peer_put(struct wg_peer *peer)
- 		return;
- 	kref_put(&peer->refcount, kref_release);
- }
-+
-+int __init wg_peer_init(void)
-+{
-+	peer_cache = KMEM_CACHE(wg_peer, 0);
-+	return peer_cache ? 0 : -ENOMEM;
-+}
-+
-+void wg_peer_uninit(void)
-+{
-+	kmem_cache_destroy(peer_cache);
-+}
---- a/drivers/net/wireguard/peer.h
-+++ b/drivers/net/wireguard/peer.h
-@@ -80,4 +80,7 @@ void wg_peer_put(struct wg_peer *peer);
- void wg_peer_remove(struct wg_peer *peer);
- void wg_peer_remove_all(struct wg_device *wg);
- 
-+int wg_peer_init(void);
-+void wg_peer_uninit(void);
-+
- #endif /* _WG_PEER_H */
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0132-wireguard-allowedips-initialize-list-head-in-selftes.patch b/target/linux/generic/backport-5.4/080-wireguard-0132-wireguard-allowedips-initialize-list-head-in-selftes.patch
deleted file mode 100644
index ce4e5dcf50..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0132-wireguard-allowedips-initialize-list-head-in-selftes.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 4 Jun 2021 17:17:35 +0200
-Subject: [PATCH] wireguard: allowedips: initialize list head in selftest
-
-commit 46cfe8eee285cde465b420637507884551f5d7ca upstream.
-
-The randomized trie tests weren't initializing the dummy peer list head,
-resulting in a NULL pointer dereference when used. Fix this by
-initializing it in the randomized trie test, just like we do for the
-static unit test.
-
-While we're at it, all of the other strings like this have the word
-"self-test", so add it to the missing place here.
-
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Cc: stable@vger.kernel.org
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/selftest/allowedips.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireguard/selftest/allowedips.c
-+++ b/drivers/net/wireguard/selftest/allowedips.c
-@@ -296,6 +296,7 @@ static __init bool randomized_test(void)
- 			goto free;
- 		}
- 		kref_init(&peers[i]->refcount);
-+		INIT_LIST_HEAD(&peers[i]->allowedips_list);
- 	}
- 
- 	mutex_lock(&mutex);
-@@ -333,7 +334,7 @@ static __init bool randomized_test(void)
- 			if (wg_allowedips_insert_v4(&t,
- 						    (struct in_addr *)mutated,
- 						    cidr, peer, &mutex) < 0) {
--				pr_err("allowedips random malloc: FAIL\n");
-+				pr_err("allowedips random self-test malloc: FAIL\n");
- 				goto free_locked;
- 			}
- 			if (horrible_allowedips_insert_v4(&h,
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0133-wireguard-allowedips-remove-nodes-in-O-1.patch b/target/linux/generic/backport-5.4/080-wireguard-0133-wireguard-allowedips-remove-nodes-in-O-1.patch
deleted file mode 100644
index 78da24ea46..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0133-wireguard-allowedips-remove-nodes-in-O-1.patch
+++ /dev/null
@@ -1,237 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 4 Jun 2021 17:17:36 +0200
-Subject: [PATCH] wireguard: allowedips: remove nodes in O(1)
-
-commit f634f418c227c912e7ea95a3299efdc9b10e4022 upstream.
-
-Previously, deleting peers would require traversing the entire trie in
-order to rebalance nodes and safely free them. This meant that removing
-1000 peers from a trie with a half million nodes would take an extremely
-long time, during which we're holding the rtnl lock. Large-scale users
-were reporting 200ms latencies added to the networking stack as a whole
-every time their userspace software would queue up significant removals.
-That's a serious situation.
-
-This commit fixes that by maintaining a double pointer to the parent's
-bit pointer for each node, and then using the already existing node list
-belonging to each peer to go directly to the node, fix up its pointers,
-and free it with RCU. This means removal is O(1) instead of O(n), and we
-don't use gobs of stack.
-
-The removal algorithm has the same downside as the code that it fixes:
-it won't collapse needlessly long runs of fillers.  We can enhance that
-in the future if it ever becomes a problem. This commit documents that
-limitation with a TODO comment in code, a small but meaningful
-improvement over the prior situation.
-
-Currently the biggest flaw, which the next commit addresses, is that
-because this increases the node size on 64-bit machines from 60 bytes to
-68 bytes. 60 rounds up to 64, but 68 rounds up to 128. So we wind up
-using twice as much memory per node, because of power-of-two
-allocations, which is a big bummer. We'll need to figure something out
-there.
-
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Cc: stable@vger.kernel.org
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/allowedips.c | 132 ++++++++++++-----------------
- drivers/net/wireguard/allowedips.h |   9 +-
- 2 files changed, 57 insertions(+), 84 deletions(-)
-
---- a/drivers/net/wireguard/allowedips.c
-+++ b/drivers/net/wireguard/allowedips.c
-@@ -66,60 +66,6 @@ static void root_remove_peer_lists(struc
- 	}
- }
- 
--static void walk_remove_by_peer(struct allowedips_node __rcu **top,
--				struct wg_peer *peer, struct mutex *lock)
--{
--#define REF(p) rcu_access_pointer(p)
--#define DEREF(p) rcu_dereference_protected(*(p), lockdep_is_held(lock))
--#define PUSH(p) ({                                                             \
--		WARN_ON(IS_ENABLED(DEBUG) && len >= 128);                      \
--		stack[len++] = p;                                              \
--	})
--
--	struct allowedips_node __rcu **stack[128], **nptr;
--	struct allowedips_node *node, *prev;
--	unsigned int len;
--
--	if (unlikely(!peer || !REF(*top)))
--		return;
--
--	for (prev = NULL, len = 0, PUSH(top); len > 0; prev = node) {
--		nptr = stack[len - 1];
--		node = DEREF(nptr);
--		if (!node) {
--			--len;
--			continue;
--		}
--		if (!prev || REF(prev->bit[0]) == node ||
--		    REF(prev->bit[1]) == node) {
--			if (REF(node->bit[0]))
--				PUSH(&node->bit[0]);
--			else if (REF(node->bit[1]))
--				PUSH(&node->bit[1]);
--		} else if (REF(node->bit[0]) == prev) {
--			if (REF(node->bit[1]))
--				PUSH(&node->bit[1]);
--		} else {
--			if (rcu_dereference_protected(node->peer,
--				lockdep_is_held(lock)) == peer) {
--				RCU_INIT_POINTER(node->peer, NULL);
--				list_del_init(&node->peer_list);
--				if (!node->bit[0] || !node->bit[1]) {
--					rcu_assign_pointer(*nptr, DEREF(
--					       &node->bit[!REF(node->bit[0])]));
--					kfree_rcu(node, rcu);
--					node = DEREF(nptr);
--				}
--			}
--			--len;
--		}
--	}
--
--#undef REF
--#undef DEREF
--#undef PUSH
--}
--
- static unsigned int fls128(u64 a, u64 b)
- {
- 	return a ? fls64(a) + 64U : fls64(b);
-@@ -224,6 +170,7 @@ static int add(struct allowedips_node __
- 		RCU_INIT_POINTER(node->peer, peer);
- 		list_add_tail(&node->peer_list, &peer->allowedips_list);
- 		copy_and_assign_cidr(node, key, cidr, bits);
-+		rcu_assign_pointer(node->parent_bit, trie);
- 		rcu_assign_pointer(*trie, node);
- 		return 0;
- 	}
-@@ -243,9 +190,9 @@ static int add(struct allowedips_node __
- 	if (!node) {
- 		down = rcu_dereference_protected(*trie, lockdep_is_held(lock));
- 	} else {
--		down = rcu_dereference_protected(CHOOSE_NODE(node, key),
--						 lockdep_is_held(lock));
-+		down = rcu_dereference_protected(CHOOSE_NODE(node, key), lockdep_is_held(lock));
- 		if (!down) {
-+			rcu_assign_pointer(newnode->parent_bit, &CHOOSE_NODE(node, key));
- 			rcu_assign_pointer(CHOOSE_NODE(node, key), newnode);
- 			return 0;
- 		}
-@@ -254,29 +201,37 @@ static int add(struct allowedips_node __
- 	parent = node;
- 
- 	if (newnode->cidr == cidr) {
-+		rcu_assign_pointer(down->parent_bit, &CHOOSE_NODE(newnode, down->bits));
- 		rcu_assign_pointer(CHOOSE_NODE(newnode, down->bits), down);
--		if (!parent)
-+		if (!parent) {
-+			rcu_assign_pointer(newnode->parent_bit, trie);
- 			rcu_assign_pointer(*trie, newnode);
--		else
--			rcu_assign_pointer(CHOOSE_NODE(parent, newnode->bits),
--					   newnode);
--	} else {
--		node = kzalloc(sizeof(*node), GFP_KERNEL);
--		if (unlikely(!node)) {
--			list_del(&newnode->peer_list);
--			kfree(newnode);
--			return -ENOMEM;
-+		} else {
-+			rcu_assign_pointer(newnode->parent_bit, &CHOOSE_NODE(parent, newnode->bits));
-+			rcu_assign_pointer(CHOOSE_NODE(parent, newnode->bits), newnode);
- 		}
--		INIT_LIST_HEAD(&node->peer_list);
--		copy_and_assign_cidr(node, newnode->bits, cidr, bits);
-+		return 0;
-+	}
-+
-+	node = kzalloc(sizeof(*node), GFP_KERNEL);
-+	if (unlikely(!node)) {
-+		list_del(&newnode->peer_list);
-+		kfree(newnode);
-+		return -ENOMEM;
-+	}
-+	INIT_LIST_HEAD(&node->peer_list);
-+	copy_and_assign_cidr(node, newnode->bits, cidr, bits);
- 
--		rcu_assign_pointer(CHOOSE_NODE(node, down->bits), down);
--		rcu_assign_pointer(CHOOSE_NODE(node, newnode->bits), newnode);
--		if (!parent)
--			rcu_assign_pointer(*trie, node);
--		else
--			rcu_assign_pointer(CHOOSE_NODE(parent, node->bits),
--					   node);
-+	rcu_assign_pointer(down->parent_bit, &CHOOSE_NODE(node, down->bits));
-+	rcu_assign_pointer(CHOOSE_NODE(node, down->bits), down);
-+	rcu_assign_pointer(newnode->parent_bit, &CHOOSE_NODE(node, newnode->bits));
-+	rcu_assign_pointer(CHOOSE_NODE(node, newnode->bits), newnode);
-+	if (!parent) {
-+		rcu_assign_pointer(node->parent_bit, trie);
-+		rcu_assign_pointer(*trie, node);
-+	} else {
-+		rcu_assign_pointer(node->parent_bit, &CHOOSE_NODE(parent, node->bits));
-+		rcu_assign_pointer(CHOOSE_NODE(parent, node->bits), node);
- 	}
- 	return 0;
- }
-@@ -335,9 +290,30 @@ int wg_allowedips_insert_v6(struct allow
- void wg_allowedips_remove_by_peer(struct allowedips *table,
- 				  struct wg_peer *peer, struct mutex *lock)
- {
-+	struct allowedips_node *node, *child, *tmp;
-+
-+	if (list_empty(&peer->allowedips_list))
-+		return;
- 	++table->seq;
--	walk_remove_by_peer(&table->root4, peer, lock);
--	walk_remove_by_peer(&table->root6, peer, lock);
-+	list_for_each_entry_safe(node, tmp, &peer->allowedips_list, peer_list) {
-+		list_del_init(&node->peer_list);
-+		RCU_INIT_POINTER(node->peer, NULL);
-+		if (node->bit[0] && node->bit[1])
-+			continue;
-+		child = rcu_dereference_protected(
-+				node->bit[!rcu_access_pointer(node->bit[0])],
-+				lockdep_is_held(lock));
-+		if (child)
-+			child->parent_bit = node->parent_bit;
-+		*rcu_dereference_protected(node->parent_bit, lockdep_is_held(lock)) = child;
-+		kfree_rcu(node, rcu);
-+
-+		/* TODO: Note that we currently don't walk up and down in order to
-+		 * free any potential filler nodes. This means that this function
-+		 * doesn't free up as much as it could, which could be revisited
-+		 * at some point.
-+		 */
-+	}
- }
- 
- int wg_allowedips_read_node(struct allowedips_node *node, u8 ip[16], u8 *cidr)
---- a/drivers/net/wireguard/allowedips.h
-+++ b/drivers/net/wireguard/allowedips.h
-@@ -15,14 +15,11 @@ struct wg_peer;
- struct allowedips_node {
- 	struct wg_peer __rcu *peer;
- 	struct allowedips_node __rcu *bit[2];
--	/* While it may seem scandalous that we waste space for v4,
--	 * we're alloc'ing to the nearest power of 2 anyway, so this
--	 * doesn't actually make a difference.
--	 */
--	u8 bits[16] __aligned(__alignof(u64));
- 	u8 cidr, bit_at_a, bit_at_b, bitlen;
-+	u8 bits[16] __aligned(__alignof(u64));
- 
--	/* Keep rarely used list at bottom to be beyond cache line. */
-+	/* Keep rarely used members at bottom to be beyond cache line. */
-+	struct allowedips_node *__rcu *parent_bit; /* XXX: this puts us at 68->128 bytes instead of 60->64 bytes!! */
- 	union {
- 		struct list_head peer_list;
- 		struct rcu_head rcu;
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0134-wireguard-allowedips-allocate-nodes-in-kmem_cache.patch b/target/linux/generic/backport-5.4/080-wireguard-0134-wireguard-allowedips-allocate-nodes-in-kmem_cache.patch
deleted file mode 100644
index 65b31b05f5..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0134-wireguard-allowedips-allocate-nodes-in-kmem_cache.patch
+++ /dev/null
@@ -1,173 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 4 Jun 2021 17:17:37 +0200
-Subject: [PATCH] wireguard: allowedips: allocate nodes in kmem_cache
-
-commit dc680de28ca849dfe589dc15ac56d22505f0ef11 upstream.
-
-The previous commit moved from O(n) to O(1) for removal, but in the
-process introduced an additional pointer member to a struct that
-increased the size from 60 to 68 bytes, putting nodes in the 128-byte
-slab. With deployed systems having as many as 2 million nodes, this
-represents a significant doubling in memory usage (128 MiB -> 256 MiB).
-Fix this by using our own kmem_cache, that's sized exactly right. This
-also makes wireguard's memory usage more transparent in tools like
-slabtop and /proc/slabinfo.
-
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Suggested-by: Arnd Bergmann <arnd@arndb.de>
-Suggested-by: Matthew Wilcox <willy@infradead.org>
-Cc: stable@vger.kernel.org
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/allowedips.c | 31 ++++++++++++++++++++++++------
- drivers/net/wireguard/allowedips.h |  5 ++++-
- drivers/net/wireguard/main.c       | 10 +++++++++-
- 3 files changed, 38 insertions(+), 8 deletions(-)
-
---- a/drivers/net/wireguard/allowedips.c
-+++ b/drivers/net/wireguard/allowedips.c
-@@ -6,6 +6,8 @@
- #include "allowedips.h"
- #include "peer.h"
- 
-+static struct kmem_cache *node_cache;
-+
- static void swap_endian(u8 *dst, const u8 *src, u8 bits)
- {
- 	if (bits == 32) {
-@@ -40,6 +42,11 @@ static void push_rcu(struct allowedips_n
- 	}
- }
- 
-+static void node_free_rcu(struct rcu_head *rcu)
-+{
-+	kmem_cache_free(node_cache, container_of(rcu, struct allowedips_node, rcu));
-+}
-+
- static void root_free_rcu(struct rcu_head *rcu)
- {
- 	struct allowedips_node *node, *stack[128] = {
-@@ -49,7 +56,7 @@ static void root_free_rcu(struct rcu_hea
- 	while (len > 0 && (node = stack[--len])) {
- 		push_rcu(stack, node->bit[0], &len);
- 		push_rcu(stack, node->bit[1], &len);
--		kfree(node);
-+		kmem_cache_free(node_cache, node);
- 	}
- }
- 
-@@ -164,7 +171,7 @@ static int add(struct allowedips_node __
- 		return -EINVAL;
- 
- 	if (!rcu_access_pointer(*trie)) {
--		node = kzalloc(sizeof(*node), GFP_KERNEL);
-+		node = kmem_cache_zalloc(node_cache, GFP_KERNEL);
- 		if (unlikely(!node))
- 			return -ENOMEM;
- 		RCU_INIT_POINTER(node->peer, peer);
-@@ -180,7 +187,7 @@ static int add(struct allowedips_node __
- 		return 0;
- 	}
- 
--	newnode = kzalloc(sizeof(*newnode), GFP_KERNEL);
-+	newnode = kmem_cache_zalloc(node_cache, GFP_KERNEL);
- 	if (unlikely(!newnode))
- 		return -ENOMEM;
- 	RCU_INIT_POINTER(newnode->peer, peer);
-@@ -213,10 +220,10 @@ static int add(struct allowedips_node __
- 		return 0;
- 	}
- 
--	node = kzalloc(sizeof(*node), GFP_KERNEL);
-+	node = kmem_cache_zalloc(node_cache, GFP_KERNEL);
- 	if (unlikely(!node)) {
- 		list_del(&newnode->peer_list);
--		kfree(newnode);
-+		kmem_cache_free(node_cache, newnode);
- 		return -ENOMEM;
- 	}
- 	INIT_LIST_HEAD(&node->peer_list);
-@@ -306,7 +313,7 @@ void wg_allowedips_remove_by_peer(struct
- 		if (child)
- 			child->parent_bit = node->parent_bit;
- 		*rcu_dereference_protected(node->parent_bit, lockdep_is_held(lock)) = child;
--		kfree_rcu(node, rcu);
-+		call_rcu(&node->rcu, node_free_rcu);
- 
- 		/* TODO: Note that we currently don't walk up and down in order to
- 		 * free any potential filler nodes. This means that this function
-@@ -350,4 +357,16 @@ struct wg_peer *wg_allowedips_lookup_src
- 	return NULL;
- }
- 
-+int __init wg_allowedips_slab_init(void)
-+{
-+	node_cache = KMEM_CACHE(allowedips_node, 0);
-+	return node_cache ? 0 : -ENOMEM;
-+}
-+
-+void wg_allowedips_slab_uninit(void)
-+{
-+	rcu_barrier();
-+	kmem_cache_destroy(node_cache);
-+}
-+
- #include "selftest/allowedips.c"
---- a/drivers/net/wireguard/allowedips.h
-+++ b/drivers/net/wireguard/allowedips.h
-@@ -19,7 +19,7 @@ struct allowedips_node {
- 	u8 bits[16] __aligned(__alignof(u64));
- 
- 	/* Keep rarely used members at bottom to be beyond cache line. */
--	struct allowedips_node *__rcu *parent_bit; /* XXX: this puts us at 68->128 bytes instead of 60->64 bytes!! */
-+	struct allowedips_node *__rcu *parent_bit;
- 	union {
- 		struct list_head peer_list;
- 		struct rcu_head rcu;
-@@ -53,4 +53,7 @@ struct wg_peer *wg_allowedips_lookup_src
- bool wg_allowedips_selftest(void);
- #endif
- 
-+int wg_allowedips_slab_init(void);
-+void wg_allowedips_slab_uninit(void);
-+
- #endif /* _WG_ALLOWEDIPS_H */
---- a/drivers/net/wireguard/main.c
-+++ b/drivers/net/wireguard/main.c
-@@ -21,10 +21,15 @@ static int __init mod_init(void)
- {
- 	int ret;
- 
-+	ret = wg_allowedips_slab_init();
-+	if (ret < 0)
-+		goto err_allowedips;
-+
- #ifdef DEBUG
-+	ret = -ENOTRECOVERABLE;
- 	if (!wg_allowedips_selftest() || !wg_packet_counter_selftest() ||
- 	    !wg_ratelimiter_selftest())
--		return -ENOTRECOVERABLE;
-+		goto err_peer;
- #endif
- 	wg_noise_init();
- 
-@@ -50,6 +55,8 @@ err_netlink:
- err_device:
- 	wg_peer_uninit();
- err_peer:
-+	wg_allowedips_slab_uninit();
-+err_allowedips:
- 	return ret;
- }
- 
-@@ -58,6 +65,7 @@ static void __exit mod_exit(void)
- 	wg_genetlink_uninit();
- 	wg_device_uninit();
- 	wg_peer_uninit();
-+	wg_allowedips_slab_uninit();
- }
- 
- module_init(mod_init);
diff --git a/target/linux/generic/backport-5.4/080-wireguard-0135-wireguard-allowedips-free-empty-intermediate-nodes-w.patch b/target/linux/generic/backport-5.4/080-wireguard-0135-wireguard-allowedips-free-empty-intermediate-nodes-w.patch
deleted file mode 100644
index c044ad25af..0000000000
--- a/target/linux/generic/backport-5.4/080-wireguard-0135-wireguard-allowedips-free-empty-intermediate-nodes-w.patch
+++ /dev/null
@@ -1,521 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Fri, 4 Jun 2021 17:17:38 +0200
-Subject: [PATCH] wireguard: allowedips: free empty intermediate nodes when
- removing single node
-
-commit bf7b042dc62a31f66d3a41dd4dfc7806f267b307 upstream.
-
-When removing single nodes, it's possible that that node's parent is an
-empty intermediate node, in which case, it too should be removed.
-Otherwise the trie fills up and never is fully emptied, leading to
-gradual memory leaks over time for tries that are modified often. There
-was originally code to do this, but was removed during refactoring in
-2016 and never reworked. Now that we have proper parent pointers from
-the previous commits, we can implement this properly.
-
-In order to reduce branching and expensive comparisons, we want to keep
-the double pointer for parent assignment (which lets us easily chain up
-to the root), but we still need to actually get the parent's base
-address. So encode the bit number into the last two bits of the pointer,
-and pack and unpack it as needed. This is a little bit clumsy but is the
-fastest and less memory wasteful of the compromises. Note that we align
-the root struct here to a minimum of 4, because it's embedded into a
-larger struct, and we're relying on having the bottom two bits for our
-flag, which would only be 16-bit aligned on m68k.
-
-The existing macro-based helpers were a bit unwieldy for adding the bit
-packing to, so this commit replaces them with safer and clearer ordinary
-functions.
-
-We add a test to the randomized/fuzzer part of the selftests, to free
-the randomized tries by-peer, refuzz it, and repeat, until it's supposed
-to be empty, and then then see if that actually resulted in the whole
-thing being emptied. That combined with kmemcheck should hopefully make
-sure this commit is doing what it should. Along the way this resulted in
-various other cleanups of the tests and fixes for recent graphviz.
-
-Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
-Cc: stable@vger.kernel.org
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/allowedips.c          | 102 ++++++------
- drivers/net/wireguard/allowedips.h          |   4 +-
- drivers/net/wireguard/selftest/allowedips.c | 162 ++++++++++----------
- 3 files changed, 137 insertions(+), 131 deletions(-)
-
---- a/drivers/net/wireguard/allowedips.c
-+++ b/drivers/net/wireguard/allowedips.c
-@@ -30,8 +30,11 @@ static void copy_and_assign_cidr(struct
- 	node->bitlen = bits;
- 	memcpy(node->bits, src, bits / 8U);
- }
--#define CHOOSE_NODE(parent, key) \
--	parent->bit[(key[parent->bit_at_a] >> parent->bit_at_b) & 1]
-+
-+static inline u8 choose(struct allowedips_node *node, const u8 *key)
-+{
-+	return (key[node->bit_at_a] >> node->bit_at_b) & 1;
-+}
- 
- static void push_rcu(struct allowedips_node **stack,
- 		     struct allowedips_node __rcu *p, unsigned int *len)
-@@ -112,7 +115,7 @@ static struct allowedips_node *find_node
- 			found = node;
- 		if (node->cidr == bits)
- 			break;
--		node = rcu_dereference_bh(CHOOSE_NODE(node, key));
-+		node = rcu_dereference_bh(node->bit[choose(node, key)]);
- 	}
- 	return found;
- }
-@@ -144,8 +147,7 @@ static bool node_placement(struct allowe
- 			   u8 cidr, u8 bits, struct allowedips_node **rnode,
- 			   struct mutex *lock)
- {
--	struct allowedips_node *node = rcu_dereference_protected(trie,
--						lockdep_is_held(lock));
-+	struct allowedips_node *node = rcu_dereference_protected(trie, lockdep_is_held(lock));
- 	struct allowedips_node *parent = NULL;
- 	bool exact = false;
- 
-@@ -155,13 +157,24 @@ static bool node_placement(struct allowe
- 			exact = true;
- 			break;
- 		}
--		node = rcu_dereference_protected(CHOOSE_NODE(parent, key),
--						 lockdep_is_held(lock));
-+		node = rcu_dereference_protected(parent->bit[choose(parent, key)], lockdep_is_held(lock));
- 	}
- 	*rnode = parent;
- 	return exact;
- }
- 
-+static inline void connect_node(struct allowedips_node **parent, u8 bit, struct allowedips_node *node)
-+{
-+	node->parent_bit_packed = (unsigned long)parent | bit;
-+	rcu_assign_pointer(*parent, node);
-+}
-+
-+static inline void choose_and_connect_node(struct allowedips_node *parent, struct allowedips_node *node)
-+{
-+	u8 bit = choose(parent, node->bits);
-+	connect_node(&parent->bit[bit], bit, node);
-+}
-+
- static int add(struct allowedips_node __rcu **trie, u8 bits, const u8 *key,
- 	       u8 cidr, struct wg_peer *peer, struct mutex *lock)
- {
-@@ -177,8 +190,7 @@ static int add(struct allowedips_node __
- 		RCU_INIT_POINTER(node->peer, peer);
- 		list_add_tail(&node->peer_list, &peer->allowedips_list);
- 		copy_and_assign_cidr(node, key, cidr, bits);
--		rcu_assign_pointer(node->parent_bit, trie);
--		rcu_assign_pointer(*trie, node);
-+		connect_node(trie, 2, node);
- 		return 0;
- 	}
- 	if (node_placement(*trie, key, cidr, bits, &node, lock)) {
-@@ -197,10 +209,10 @@ static int add(struct allowedips_node __
- 	if (!node) {
- 		down = rcu_dereference_protected(*trie, lockdep_is_held(lock));
- 	} else {
--		down = rcu_dereference_protected(CHOOSE_NODE(node, key), lockdep_is_held(lock));
-+		const u8 bit = choose(node, key);
-+		down = rcu_dereference_protected(node->bit[bit], lockdep_is_held(lock));
- 		if (!down) {
--			rcu_assign_pointer(newnode->parent_bit, &CHOOSE_NODE(node, key));
--			rcu_assign_pointer(CHOOSE_NODE(node, key), newnode);
-+			connect_node(&node->bit[bit], bit, newnode);
- 			return 0;
- 		}
- 	}
-@@ -208,15 +220,11 @@ static int add(struct allowedips_node __
- 	parent = node;
- 
- 	if (newnode->cidr == cidr) {
--		rcu_assign_pointer(down->parent_bit, &CHOOSE_NODE(newnode, down->bits));
--		rcu_assign_pointer(CHOOSE_NODE(newnode, down->bits), down);
--		if (!parent) {
--			rcu_assign_pointer(newnode->parent_bit, trie);
--			rcu_assign_pointer(*trie, newnode);
--		} else {
--			rcu_assign_pointer(newnode->parent_bit, &CHOOSE_NODE(parent, newnode->bits));
--			rcu_assign_pointer(CHOOSE_NODE(parent, newnode->bits), newnode);
--		}
-+		choose_and_connect_node(newnode, down);
-+		if (!parent)
-+			connect_node(trie, 2, newnode);
-+		else
-+			choose_and_connect_node(parent, newnode);
- 		return 0;
- 	}
- 
-@@ -229,17 +237,12 @@ static int add(struct allowedips_node __
- 	INIT_LIST_HEAD(&node->peer_list);
- 	copy_and_assign_cidr(node, newnode->bits, cidr, bits);
- 
--	rcu_assign_pointer(down->parent_bit, &CHOOSE_NODE(node, down->bits));
--	rcu_assign_pointer(CHOOSE_NODE(node, down->bits), down);
--	rcu_assign_pointer(newnode->parent_bit, &CHOOSE_NODE(node, newnode->bits));
--	rcu_assign_pointer(CHOOSE_NODE(node, newnode->bits), newnode);
--	if (!parent) {
--		rcu_assign_pointer(node->parent_bit, trie);
--		rcu_assign_pointer(*trie, node);
--	} else {
--		rcu_assign_pointer(node->parent_bit, &CHOOSE_NODE(parent, node->bits));
--		rcu_assign_pointer(CHOOSE_NODE(parent, node->bits), node);
--	}
-+	choose_and_connect_node(node, down);
-+	choose_and_connect_node(node, newnode);
-+	if (!parent)
-+		connect_node(trie, 2, node);
-+	else
-+		choose_and_connect_node(parent, node);
- 	return 0;
- }
- 
-@@ -297,7 +300,8 @@ int wg_allowedips_insert_v6(struct allow
- void wg_allowedips_remove_by_peer(struct allowedips *table,
- 				  struct wg_peer *peer, struct mutex *lock)
- {
--	struct allowedips_node *node, *child, *tmp;
-+	struct allowedips_node *node, *child, **parent_bit, *parent, *tmp;
-+	bool free_parent;
- 
- 	if (list_empty(&peer->allowedips_list))
- 		return;
-@@ -307,19 +311,29 @@ void wg_allowedips_remove_by_peer(struct
- 		RCU_INIT_POINTER(node->peer, NULL);
- 		if (node->bit[0] && node->bit[1])
- 			continue;
--		child = rcu_dereference_protected(
--				node->bit[!rcu_access_pointer(node->bit[0])],
--				lockdep_is_held(lock));
-+		child = rcu_dereference_protected(node->bit[!rcu_access_pointer(node->bit[0])],
-+						  lockdep_is_held(lock));
- 		if (child)
--			child->parent_bit = node->parent_bit;
--		*rcu_dereference_protected(node->parent_bit, lockdep_is_held(lock)) = child;
-+			child->parent_bit_packed = node->parent_bit_packed;
-+		parent_bit = (struct allowedips_node **)(node->parent_bit_packed & ~3UL);
-+		*parent_bit = child;
-+		parent = (void *)parent_bit -
-+			 offsetof(struct allowedips_node, bit[node->parent_bit_packed & 1]);
-+		free_parent = !rcu_access_pointer(node->bit[0]) &&
-+			      !rcu_access_pointer(node->bit[1]) &&
-+			      (node->parent_bit_packed & 3) <= 1 &&
-+			      !rcu_access_pointer(parent->peer);
-+		if (free_parent)
-+			child = rcu_dereference_protected(
-+					parent->bit[!(node->parent_bit_packed & 1)],
-+					lockdep_is_held(lock));
- 		call_rcu(&node->rcu, node_free_rcu);
--
--		/* TODO: Note that we currently don't walk up and down in order to
--		 * free any potential filler nodes. This means that this function
--		 * doesn't free up as much as it could, which could be revisited
--		 * at some point.
--		 */
-+		if (!free_parent)
-+			continue;
-+		if (child)
-+			child->parent_bit_packed = parent->parent_bit_packed;
-+		*(struct allowedips_node **)(parent->parent_bit_packed & ~3UL) = child;
-+		call_rcu(&parent->rcu, node_free_rcu);
- 	}
- }
- 
---- a/drivers/net/wireguard/allowedips.h
-+++ b/drivers/net/wireguard/allowedips.h
-@@ -19,7 +19,7 @@ struct allowedips_node {
- 	u8 bits[16] __aligned(__alignof(u64));
- 
- 	/* Keep rarely used members at bottom to be beyond cache line. */
--	struct allowedips_node *__rcu *parent_bit;
-+	unsigned long parent_bit_packed;
- 	union {
- 		struct list_head peer_list;
- 		struct rcu_head rcu;
-@@ -30,7 +30,7 @@ struct allowedips {
- 	struct allowedips_node __rcu *root4;
- 	struct allowedips_node __rcu *root6;
- 	u64 seq;
--};
-+} __aligned(4); /* We pack the lower 2 bits of &root, but m68k only gives 16-bit alignment. */
- 
- void wg_allowedips_init(struct allowedips *table);
- void wg_allowedips_free(struct allowedips *table, struct mutex *mutex);
---- a/drivers/net/wireguard/selftest/allowedips.c
-+++ b/drivers/net/wireguard/selftest/allowedips.c
-@@ -19,32 +19,22 @@
- 
- #include <linux/siphash.h>
- 
--static __init void swap_endian_and_apply_cidr(u8 *dst, const u8 *src, u8 bits,
--					      u8 cidr)
--{
--	swap_endian(dst, src, bits);
--	memset(dst + (cidr + 7) / 8, 0, bits / 8 - (cidr + 7) / 8);
--	if (cidr)
--		dst[(cidr + 7) / 8 - 1] &= ~0U << ((8 - (cidr % 8)) % 8);
--}
--
- static __init void print_node(struct allowedips_node *node, u8 bits)
- {
- 	char *fmt_connection = KERN_DEBUG "\t\"%p/%d\" -> \"%p/%d\";\n";
--	char *fmt_declaration = KERN_DEBUG
--		"\t\"%p/%d\"[style=%s, color=\"#%06x\"];\n";
-+	char *fmt_declaration = KERN_DEBUG "\t\"%p/%d\"[style=%s, color=\"#%06x\"];\n";
-+	u8 ip1[16], ip2[16], cidr1, cidr2;
- 	char *style = "dotted";
--	u8 ip1[16], ip2[16];
- 	u32 color = 0;
- 
-+	if (node == NULL)
-+		return;
- 	if (bits == 32) {
- 		fmt_connection = KERN_DEBUG "\t\"%pI4/%d\" -> \"%pI4/%d\";\n";
--		fmt_declaration = KERN_DEBUG
--			"\t\"%pI4/%d\"[style=%s, color=\"#%06x\"];\n";
-+		fmt_declaration = KERN_DEBUG "\t\"%pI4/%d\"[style=%s, color=\"#%06x\"];\n";
- 	} else if (bits == 128) {
- 		fmt_connection = KERN_DEBUG "\t\"%pI6/%d\" -> \"%pI6/%d\";\n";
--		fmt_declaration = KERN_DEBUG
--			"\t\"%pI6/%d\"[style=%s, color=\"#%06x\"];\n";
-+		fmt_declaration = KERN_DEBUG "\t\"%pI6/%d\"[style=%s, color=\"#%06x\"];\n";
- 	}
- 	if (node->peer) {
- 		hsiphash_key_t key = { { 0 } };
-@@ -55,24 +45,20 @@ static __init void print_node(struct all
- 			hsiphash_1u32(0xabad1dea, &key) % 200;
- 		style = "bold";
- 	}
--	swap_endian_and_apply_cidr(ip1, node->bits, bits, node->cidr);
--	printk(fmt_declaration, ip1, node->cidr, style, color);
-+	wg_allowedips_read_node(node, ip1, &cidr1);
-+	printk(fmt_declaration, ip1, cidr1, style, color);
- 	if (node->bit[0]) {
--		swap_endian_and_apply_cidr(ip2,
--				rcu_dereference_raw(node->bit[0])->bits, bits,
--				node->cidr);
--		printk(fmt_connection, ip1, node->cidr, ip2,
--		       rcu_dereference_raw(node->bit[0])->cidr);
--		print_node(rcu_dereference_raw(node->bit[0]), bits);
-+		wg_allowedips_read_node(rcu_dereference_raw(node->bit[0]), ip2, &cidr2);
-+		printk(fmt_connection, ip1, cidr1, ip2, cidr2);
- 	}
- 	if (node->bit[1]) {
--		swap_endian_and_apply_cidr(ip2,
--				rcu_dereference_raw(node->bit[1])->bits,
--				bits, node->cidr);
--		printk(fmt_connection, ip1, node->cidr, ip2,
--		       rcu_dereference_raw(node->bit[1])->cidr);
--		print_node(rcu_dereference_raw(node->bit[1]), bits);
-+		wg_allowedips_read_node(rcu_dereference_raw(node->bit[1]), ip2, &cidr2);
-+		printk(fmt_connection, ip1, cidr1, ip2, cidr2);
- 	}
-+	if (node->bit[0])
-+		print_node(rcu_dereference_raw(node->bit[0]), bits);
-+	if (node->bit[1])
-+		print_node(rcu_dereference_raw(node->bit[1]), bits);
- }
- 
- static __init void print_tree(struct allowedips_node __rcu *top, u8 bits)
-@@ -121,8 +107,8 @@ static __init inline union nf_inet_addr
- {
- 	union nf_inet_addr mask;
- 
--	memset(&mask, 0x00, 128 / 8);
--	memset(&mask, 0xff, cidr / 8);
-+	memset(&mask, 0, sizeof(mask));
-+	memset(&mask.all, 0xff, cidr / 8);
- 	if (cidr % 32)
- 		mask.all[cidr / 32] = (__force u32)htonl(
- 			(0xFFFFFFFFUL << (32 - (cidr % 32))) & 0xFFFFFFFFUL);
-@@ -149,42 +135,36 @@ horrible_mask_self(struct horrible_allow
- }
- 
- static __init inline bool
--horrible_match_v4(const struct horrible_allowedips_node *node,
--		  struct in_addr *ip)
-+horrible_match_v4(const struct horrible_allowedips_node *node, struct in_addr *ip)
- {
- 	return (ip->s_addr & node->mask.ip) == node->ip.ip;
- }
- 
- static __init inline bool
--horrible_match_v6(const struct horrible_allowedips_node *node,
--		  struct in6_addr *ip)
-+horrible_match_v6(const struct horrible_allowedips_node *node, struct in6_addr *ip)
- {
--	return (ip->in6_u.u6_addr32[0] & node->mask.ip6[0]) ==
--		       node->ip.ip6[0] &&
--	       (ip->in6_u.u6_addr32[1] & node->mask.ip6[1]) ==
--		       node->ip.ip6[1] &&
--	       (ip->in6_u.u6_addr32[2] & node->mask.ip6[2]) ==
--		       node->ip.ip6[2] &&
-+	return (ip->in6_u.u6_addr32[0] & node->mask.ip6[0]) == node->ip.ip6[0] &&
-+	       (ip->in6_u.u6_addr32[1] & node->mask.ip6[1]) == node->ip.ip6[1] &&
-+	       (ip->in6_u.u6_addr32[2] & node->mask.ip6[2]) == node->ip.ip6[2] &&
- 	       (ip->in6_u.u6_addr32[3] & node->mask.ip6[3]) == node->ip.ip6[3];
- }
- 
- static __init void
--horrible_insert_ordered(struct horrible_allowedips *table,
--			struct horrible_allowedips_node *node)
-+horrible_insert_ordered(struct horrible_allowedips *table, struct horrible_allowedips_node *node)
- {
- 	struct horrible_allowedips_node *other = NULL, *where = NULL;
- 	u8 my_cidr = horrible_mask_to_cidr(node->mask);
- 
- 	hlist_for_each_entry(other, &table->head, table) {
--		if (!memcmp(&other->mask, &node->mask,
--			    sizeof(union nf_inet_addr)) &&
--		    !memcmp(&other->ip, &node->ip,
--			    sizeof(union nf_inet_addr)) &&
--		    other->ip_version == node->ip_version) {
-+		if (other->ip_version == node->ip_version &&
-+		    !memcmp(&other->mask, &node->mask, sizeof(union nf_inet_addr)) &&
-+		    !memcmp(&other->ip, &node->ip, sizeof(union nf_inet_addr))) {
- 			other->value = node->value;
- 			kfree(node);
- 			return;
- 		}
-+	}
-+	hlist_for_each_entry(other, &table->head, table) {
- 		where = other;
- 		if (horrible_mask_to_cidr(other->mask) <= my_cidr)
- 			break;
-@@ -201,8 +181,7 @@ static __init int
- horrible_allowedips_insert_v4(struct horrible_allowedips *table,
- 			      struct in_addr *ip, u8 cidr, void *value)
- {
--	struct horrible_allowedips_node *node = kzalloc(sizeof(*node),
--							GFP_KERNEL);
-+	struct horrible_allowedips_node *node = kzalloc(sizeof(*node), GFP_KERNEL);
- 
- 	if (unlikely(!node))
- 		return -ENOMEM;
-@@ -219,8 +198,7 @@ static __init int
- horrible_allowedips_insert_v6(struct horrible_allowedips *table,
- 			      struct in6_addr *ip, u8 cidr, void *value)
- {
--	struct horrible_allowedips_node *node = kzalloc(sizeof(*node),
--							GFP_KERNEL);
-+	struct horrible_allowedips_node *node = kzalloc(sizeof(*node), GFP_KERNEL);
- 
- 	if (unlikely(!node))
- 		return -ENOMEM;
-@@ -234,39 +212,43 @@ horrible_allowedips_insert_v6(struct hor
- }
- 
- static __init void *
--horrible_allowedips_lookup_v4(struct horrible_allowedips *table,
--			      struct in_addr *ip)
-+horrible_allowedips_lookup_v4(struct horrible_allowedips *table, struct in_addr *ip)
- {
- 	struct horrible_allowedips_node *node;
--	void *ret = NULL;
- 
- 	hlist_for_each_entry(node, &table->head, table) {
--		if (node->ip_version != 4)
--			continue;
--		if (horrible_match_v4(node, ip)) {
--			ret = node->value;
--			break;
--		}
-+		if (node->ip_version == 4 && horrible_match_v4(node, ip))
-+			return node->value;
- 	}
--	return ret;
-+	return NULL;
- }
- 
- static __init void *
--horrible_allowedips_lookup_v6(struct horrible_allowedips *table,
--			      struct in6_addr *ip)
-+horrible_allowedips_lookup_v6(struct horrible_allowedips *table, struct in6_addr *ip)
- {
- 	struct horrible_allowedips_node *node;
--	void *ret = NULL;
- 
- 	hlist_for_each_entry(node, &table->head, table) {
--		if (node->ip_version != 6)
-+		if (node->ip_version == 6 && horrible_match_v6(node, ip))
-+			return node->value;
-+	}
-+	return NULL;
-+}
-+
-+
-+static __init void
-+horrible_allowedips_remove_by_value(struct horrible_allowedips *table, void *value)
-+{
-+	struct horrible_allowedips_node *node;
-+	struct hlist_node *h;
-+
-+	hlist_for_each_entry_safe(node, h, &table->head, table) {
-+		if (node->value != value)
- 			continue;
--		if (horrible_match_v6(node, ip)) {
--			ret = node->value;
--			break;
--		}
-+		hlist_del(&node->table);
-+		kfree(node);
- 	}
--	return ret;
-+
- }
- 
- static __init bool randomized_test(void)
-@@ -397,23 +379,33 @@ static __init bool randomized_test(void)
- 		print_tree(t.root6, 128);
- 	}
- 
--	for (i = 0; i < NUM_QUERIES; ++i) {
--		prandom_bytes(ip, 4);
--		if (lookup(t.root4, 32, ip) !=
--		    horrible_allowedips_lookup_v4(&h, (struct in_addr *)ip)) {
--			pr_err("allowedips random self-test: FAIL\n");
--			goto free;
-+	for (j = 0;; ++j) {
-+		for (i = 0; i < NUM_QUERIES; ++i) {
-+			prandom_bytes(ip, 4);
-+			if (lookup(t.root4, 32, ip) != horrible_allowedips_lookup_v4(&h, (struct in_addr *)ip)) {
-+				horrible_allowedips_lookup_v4(&h, (struct in_addr *)ip);
-+				pr_err("allowedips random v4 self-test: FAIL\n");
-+				goto free;
-+			}
-+			prandom_bytes(ip, 16);
-+			if (lookup(t.root6, 128, ip) != horrible_allowedips_lookup_v6(&h, (struct in6_addr *)ip)) {
-+				pr_err("allowedips random v6 self-test: FAIL\n");
-+				goto free;
-+			}
- 		}
-+		if (j >= NUM_PEERS)
-+			break;
-+		mutex_lock(&mutex);
-+		wg_allowedips_remove_by_peer(&t, peers[j], &mutex);
-+		mutex_unlock(&mutex);
-+		horrible_allowedips_remove_by_value(&h, peers[j]);
- 	}
- 
--	for (i = 0; i < NUM_QUERIES; ++i) {
--		prandom_bytes(ip, 16);
--		if (lookup(t.root6, 128, ip) !=
--		    horrible_allowedips_lookup_v6(&h, (struct in6_addr *)ip)) {
--			pr_err("allowedips random self-test: FAIL\n");
--			goto free;
--		}
-+	if (t.root4 || t.root6) {
-+		pr_err("allowedips random self-test removal: FAIL\n");
-+		goto free;
- 	}
-+
- 	ret = true;
- 
- free:
diff --git a/target/linux/generic/backport-5.4/300-MIPS-Exclude-more-dsemul-code-when-CONFIG_MIPS_FP_SU.patch b/target/linux/generic/backport-5.4/300-MIPS-Exclude-more-dsemul-code-when-CONFIG_MIPS_FP_SU.patch
deleted file mode 100644
index 0bc58e756b..0000000000
--- a/target/linux/generic/backport-5.4/300-MIPS-Exclude-more-dsemul-code-when-CONFIG_MIPS_FP_SU.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From d96c3157f9ca177727fbad960fcf6f52f145f471 Mon Sep 17 00:00:00 2001
-From: Yousong Zhou <yszhou4tech@gmail.com>
-Date: Thu, 9 Jan 2020 11:33:19 +0800
-Subject: [PATCH] MIPS: Exclude more dsemul code when CONFIG_MIPS_FP_SUPPORT=n
-
-This furthers what commit 42b10815d559 ("MIPS: Don't compile math-emu
-when CONFIG_MIPS_FP_SUPPORT=n") has done
-
-Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
----
- arch/mips/include/asm/processor.h | 12 ++++++------
- arch/mips/kernel/process.c        | 10 ++++++++--
- arch/mips/kernel/vdso.c           | 26 +++++++++++++++-----------
- 3 files changed, 29 insertions(+), 19 deletions(-)
-
---- a/arch/mips/include/asm/processor.h
-+++ b/arch/mips/include/asm/processor.h
-@@ -253,13 +253,13 @@ struct thread_struct {
- #ifdef CONFIG_MIPS_FP_SUPPORT
- 	/* Saved fpu/fpu emulator stuff. */
- 	struct mips_fpu_struct fpu FPU_ALIGN;
--#endif
- 	/* Assigned branch delay slot 'emulation' frame */
- 	atomic_t bd_emu_frame;
- 	/* PC of the branch from a branch delay slot 'emulation' */
- 	unsigned long bd_emu_branch_pc;
- 	/* PC to continue from following a branch delay slot 'emulation' */
- 	unsigned long bd_emu_cont_pc;
-+#endif
- #ifdef CONFIG_MIPS_MT_FPAFF
- 	/* Emulated instruction count */
- 	unsigned long emulated_fp;
-@@ -302,7 +302,11 @@ struct thread_struct {
- 		.fpr		= {{{0,},},},			\
- 		.fcr31		= 0,				\
- 		.msacsr		= 0,				\
--	},
-+	},							\
-+	/* Delay slot emulation */				\
-+	.bd_emu_frame = ATOMIC_INIT(BD_EMUFRAME_NONE),		\
-+	.bd_emu_branch_pc = 0,					\
-+	.bd_emu_cont_pc = 0,
- #else
- # define FPU_INIT
- #endif
-@@ -334,10 +338,6 @@ struct thread_struct {
- 	 * FPU affinity state (null if not FPAFF)		\
- 	 */							\
- 	FPAFF_INIT						\
--	/* Delay slot emulation */				\
--	.bd_emu_frame = ATOMIC_INIT(BD_EMUFRAME_NONE),		\
--	.bd_emu_branch_pc = 0,					\
--	.bd_emu_cont_pc = 0,					\
- 	/*							\
- 	 * Saved DSP stuff					\
- 	 */							\
---- a/arch/mips/kernel/process.c
-+++ b/arch/mips/kernel/process.c
-@@ -75,7 +75,9 @@ void start_thread(struct pt_regs * regs,
- 	lose_fpu(0);
- 	clear_thread_flag(TIF_MSA_CTX_LIVE);
- 	clear_used_math();
-+#ifdef CONFIG_MIPS_FP_SUPPORT
- 	atomic_set(&current->thread.bd_emu_frame, BD_EMUFRAME_NONE);
-+#endif
- 	init_dsp();
- 	regs->cp0_epc = pc;
- 	regs->regs[29] = sp;
-@@ -176,7 +178,9 @@ int copy_thread_tls(unsigned long clone_
- 	clear_tsk_thread_flag(p, TIF_FPUBOUND);
- #endif /* CONFIG_MIPS_MT_FPAFF */
- 
-+#ifdef CONFIG_MIPS_FP_SUPPORT
- 	atomic_set(&p->thread.bd_emu_frame, BD_EMUFRAME_NONE);
-+#endif
- 
- 	if (clone_flags & CLONE_SETTLS)
- 		ti->tp_value = tls;
-@@ -650,8 +654,10 @@ unsigned long mips_stack_top(void)
- {
- 	unsigned long top = TASK_SIZE & PAGE_MASK;
- 
--	/* One page for branch delay slot "emulation" */
--	top -= PAGE_SIZE;
-+	if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT)) {
-+		/* One page for branch delay slot "emulation" */
-+		top -= PAGE_SIZE;
-+	}
- 
- 	/* Space for the VDSO, data page & GIC user page */
- 	top -= PAGE_ALIGN(current->thread.abi->vdso->size);
---- a/arch/mips/kernel/vdso.c
-+++ b/arch/mips/kernel/vdso.c
-@@ -71,10 +71,12 @@ subsys_initcall(init_vdso);
- 
- static unsigned long vdso_base(void)
- {
--	unsigned long base;
-+	unsigned long base = STACK_TOP;
- 
--	/* Skip the delay slot emulation page */
--	base = STACK_TOP + PAGE_SIZE;
-+	if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT)) {
-+		/* Skip the delay slot emulation page */
-+		base += PAGE_SIZE;
-+	}
- 
- 	if (current->flags & PF_RANDOMIZE) {
- 		base += get_random_int() & (VDSO_RANDOMIZE_SIZE - 1);
-@@ -95,14 +97,16 @@ int arch_setup_additional_pages(struct l
- 	if (down_write_killable(&mm->mmap_sem))
- 		return -EINTR;
- 
--	/* Map delay slot emulation page */
--	base = mmap_region(NULL, STACK_TOP, PAGE_SIZE,
--			   VM_READ | VM_EXEC |
--			   VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
--			   0, NULL);
--	if (IS_ERR_VALUE(base)) {
--		ret = base;
--		goto out;
-+	if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT)) {
-+		/* Map delay slot emulation page */
-+		base = mmap_region(NULL, STACK_TOP, PAGE_SIZE,
-+				VM_READ | VM_EXEC |
-+				VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
-+				0, NULL);
-+		if (IS_ERR_VALUE(base)) {
-+			ret = base;
-+			goto out;
-+		}
- 	}
- 
- 	/*
diff --git a/target/linux/generic/backport-5.4/310-mips-Kconfig-Add-ARCH_HAS_FORTIFY_SOURCE.patch b/target/linux/generic/backport-5.4/310-mips-Kconfig-Add-ARCH_HAS_FORTIFY_SOURCE.patch
deleted file mode 100644
index e02f103543..0000000000
--- a/target/linux/generic/backport-5.4/310-mips-Kconfig-Add-ARCH_HAS_FORTIFY_SOURCE.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From a8d2bb0559b5fefa5173ff4e7496cc6250db2c8a Mon Sep 17 00:00:00 2001
-From: Dmitry Korotin <dkorotin@wavecomp.com>
-Date: Thu, 12 Sep 2019 22:53:45 +0000
-Subject: [PATCH] mips: Kconfig: Add ARCH_HAS_FORTIFY_SOURCE
-
-FORTIFY_SOURCE detects various overflows at compile and run time.
-(6974f0c4555e ("include/linux/string.h:
-add the option of fortified string.h functions)
-
-ARCH_HAS_FORTIFY_SOURCE means that the architecture can be built and
-run with CONFIG_FORTIFY_SOURCE.
-
-Since mips can be built and run with that flag,
-select ARCH_HAS_FORTIFY_SOURCE as default.
-
-Signed-off-by: Dmitry Korotin <dkorotin@wavecomp.com>
-Signed-off-by: Paul Burton <paul.burton@mips.com>
-Cc: linux-mips@vger.kernel.org
----
- arch/mips/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -7,6 +7,7 @@ config MIPS
- 	select ARCH_CLOCKSOURCE_DATA
- 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
- 	select ARCH_HAS_UBSAN_SANITIZE_ALL
-+	select ARCH_HAS_FORTIFY_SOURCE
- 	select ARCH_SUPPORTS_UPROBES
- 	select ARCH_USE_BUILTIN_BSWAP
- 	select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
diff --git a/target/linux/generic/backport-5.4/310-v5.6-mips-vdso-fix-jalr-t9-crash-in-vdso-code.patch b/target/linux/generic/backport-5.4/310-v5.6-mips-vdso-fix-jalr-t9-crash-in-vdso-code.patch
deleted file mode 100644
index 51eef4b26b..0000000000
--- a/target/linux/generic/backport-5.4/310-v5.6-mips-vdso-fix-jalr-t9-crash-in-vdso-code.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From d3f703c4359ff06619b2322b91f69710453e6b6d Mon Sep 17 00:00:00 2001
-From: Victor Kamensky <kamensky@cisco.com>
-Date: Tue, 11 Feb 2020 11:24:33 -0800
-Subject: [PATCH] mips: vdso: fix 'jalr t9' crash in vdso code
-
-Observed that when kernel is built with Yocto mips64-poky-linux-gcc,
-and mips64-poky-linux-gnun32-gcc toolchain, resulting vdso contains
-'jalr t9' instructions in its code and since in vdso case nobody
-sets GOT table code crashes when instruction reached. On other hand
-observed that when kernel is built mips-poky-linux-gcc toolchain, the
-same 'jalr t9' instruction are replaced with PC relative function
-calls using 'bal' instructions.
-
-The difference boils down to -mrelax-pic-calls and -mexplicit-relocs
-gcc options that gets different default values depending on gcc
-target triplets and corresponding binutils. -mrelax-pic-calls got
-enabled by default only in mips-poky-linux-gcc case. MIPS binutils
-ld relies on R_MIPS_JALR relocation to convert 'jalr t9' into 'bal'
-and such relocation is generated only if -mrelax-pic-calls option
-is on.
-
-Please note 'jalr t9' conversion to 'bal' can happen only to static
-functions. These static PIC calls use mips local GOT entries that
-are supposed to be filled with start of DSO value by run-time linker
-(missing in VDSO case) and they do not have dynamic relocations.
-Global mips GOT entries must have dynamic relocations and they should
-be prevented by cmd_vdso_check Makefile rule.
-
-Solution call out -mrelax-pic-calls and -mexplicit-relocs options
-explicitly while compiling MIPS vdso code. That would get correct
-and consistent between different toolchains behaviour.
-
-Reported-by: Bruce Ashfield <bruce.ashfield@gmail.com>
-Signed-off-by: Victor Kamensky <kamensky@cisco.com>
-Signed-off-by: Paul Burton <paulburton@kernel.org>
-Cc: linux-mips@vger.kernel.org
-Cc: Ralf Baechle <ralf@linux-mips.org>
-Cc: James Hogan <jhogan@kernel.org>
-Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
-Cc: richard.purdie@linuxfoundation.org
----
- arch/mips/vdso/Makefile | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/vdso/Makefile
-+++ b/arch/mips/vdso/Makefile
-@@ -26,6 +26,7 @@ ccflags-vdso := \
- cflags-vdso := $(ccflags-vdso) \
- 	$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
- 	-O3 -g -fPIC -fno-strict-aliasing -fno-common -fno-builtin -G 0 \
-+	-mrelax-pic-calls -mexplicit-relocs \
- 	-fno-stack-protector -fno-jump-tables -DDISABLE_BRANCH_PROFILING \
- 	$(call cc-option, -fno-asynchronous-unwind-tables) \
- 	$(call cc-option, -fno-stack-protector)
diff --git a/target/linux/generic/backport-5.4/311-MIPS-Fix-exception-handler-memcpy.patch b/target/linux/generic/backport-5.4/311-MIPS-Fix-exception-handler-memcpy.patch
deleted file mode 100644
index 5a6725c7a0..0000000000
--- a/target/linux/generic/backport-5.4/311-MIPS-Fix-exception-handler-memcpy.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From e01c91a360793298c9e1656a61faceff01487a43 Mon Sep 17 00:00:00 2001
-From: Ben Hutchings <ben@decadent.org.uk>
-Date: Sat, 23 May 2020 23:50:34 +0800
-Subject: [PATCH] MIPS: Fix exception handler memcpy()
-
-The exception handler subroutines are declared as a single char, but
-when copied to the required addresses the copy length is 0x80.
-
-When range checks are enabled for memcpy() this results in a build
-failure, with error messages such as:
-
-In file included from arch/mips/mti-malta/malta-init.c:15:
-In function 'memcpy',
-    inlined from 'mips_nmi_setup' at arch/mips/mti-malta/malta-init.c:98:2:
-include/linux/string.h:376:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter
-  376 |    __read_overflow2();
-      |    ^~~~~~~~~~~~~~~~~~
-
-Change the declarations to use type char[].
-
-Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-Signed-off-by: YunQiang Su <syq@debian.org>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/loongson64/common/init.c | 4 ++--
- arch/mips/mti-malta/malta-init.c   | 8 ++++----
- arch/mips/pistachio/init.c         | 8 ++++----
- 3 files changed, 10 insertions(+), 10 deletions(-)
-
---- a/arch/mips/loongson64/common/init.c
-+++ b/arch/mips/loongson64/common/init.c
-@@ -18,10 +18,10 @@ unsigned long __maybe_unused _loongson_a
- static void __init mips_nmi_setup(void)
- {
- 	void *base;
--	extern char except_vec_nmi;
-+	extern char except_vec_nmi[];
- 
- 	base = (void *)(CAC_BASE + 0x380);
--	memcpy(base, &except_vec_nmi, 0x80);
-+	memcpy(base, except_vec_nmi, 0x80);
- 	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
- }
- 
---- a/arch/mips/mti-malta/malta-init.c
-+++ b/arch/mips/mti-malta/malta-init.c
-@@ -90,24 +90,24 @@ static void __init console_config(void)
- static void __init mips_nmi_setup(void)
- {
- 	void *base;
--	extern char except_vec_nmi;
-+	extern char except_vec_nmi[];
- 
- 	base = cpu_has_veic ?
- 		(void *)(CAC_BASE + 0xa80) :
- 		(void *)(CAC_BASE + 0x380);
--	memcpy(base, &except_vec_nmi, 0x80);
-+	memcpy(base, except_vec_nmi, 0x80);
- 	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
- }
- 
- static void __init mips_ejtag_setup(void)
- {
- 	void *base;
--	extern char except_vec_ejtag_debug;
-+	extern char except_vec_ejtag_debug[];
- 
- 	base = cpu_has_veic ?
- 		(void *)(CAC_BASE + 0xa00) :
- 		(void *)(CAC_BASE + 0x300);
--	memcpy(base, &except_vec_ejtag_debug, 0x80);
-+	memcpy(base, except_vec_ejtag_debug, 0x80);
- 	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
- }
- 
---- a/arch/mips/pistachio/init.c
-+++ b/arch/mips/pistachio/init.c
-@@ -83,12 +83,12 @@ phys_addr_t mips_cdmm_phys_base(void)
- static void __init mips_nmi_setup(void)
- {
- 	void *base;
--	extern char except_vec_nmi;
-+	extern char except_vec_nmi[];
- 
- 	base = cpu_has_veic ?
- 		(void *)(CAC_BASE + 0xa80) :
- 		(void *)(CAC_BASE + 0x380);
--	memcpy(base, &except_vec_nmi, 0x80);
-+	memcpy(base, except_vec_nmi, 0x80);
- 	flush_icache_range((unsigned long)base,
- 			   (unsigned long)base + 0x80);
- }
-@@ -96,12 +96,12 @@ static void __init mips_nmi_setup(void)
- static void __init mips_ejtag_setup(void)
- {
- 	void *base;
--	extern char except_vec_ejtag_debug;
-+	extern char except_vec_ejtag_debug[];
- 
- 	base = cpu_has_veic ?
- 		(void *)(CAC_BASE + 0xa00) :
- 		(void *)(CAC_BASE + 0x300);
--	memcpy(base, &except_vec_ejtag_debug, 0x80);
-+	memcpy(base, except_vec_ejtag_debug, 0x80);
- 	flush_icache_range((unsigned long)base,
- 			   (unsigned long)base + 0x80);
- }
diff --git a/target/linux/generic/backport-5.4/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch b/target/linux/generic/backport-5.4/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch
deleted file mode 100644
index 501f42d88e..0000000000
--- a/target/linux/generic/backport-5.4/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Thu, 25 Jan 2018 12:58:55 +0100
-Subject: [PATCH] netfilter: nft_flow_offload: handle netdevice events from
- nf_flow_table
-
-Move the code that deals with device events to the core.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -529,5 +529,35 @@ void nf_flow_table_free(struct nf_flowta
- }
- EXPORT_SYMBOL_GPL(nf_flow_table_free);
- 
-+static int nf_flow_table_netdev_event(struct notifier_block *this,
-+				      unsigned long event, void *ptr)
-+{
-+	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-+
-+	if (event != NETDEV_DOWN)
-+		return NOTIFY_DONE;
-+
-+	nf_flow_table_cleanup(dev);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block flow_offload_netdev_notifier = {
-+	.notifier_call	= nf_flow_table_netdev_event,
-+};
-+
-+static int __init nf_flow_table_module_init(void)
-+{
-+	return register_netdevice_notifier(&flow_offload_netdev_notifier);
-+}
-+
-+static void __exit nf_flow_table_module_exit(void)
-+{
-+	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
-+}
-+
-+module_init(nf_flow_table_module_init);
-+module_exit(nf_flow_table_module_exit);
-+
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Pablo Neira Ayuso <pablo@netfilter.org>");
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -234,47 +234,14 @@ static struct nft_expr_type nft_flow_off
- 	.owner		= THIS_MODULE,
- };
- 
--static int flow_offload_netdev_event(struct notifier_block *this,
--				     unsigned long event, void *ptr)
--{
--	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
--
--	if (event != NETDEV_DOWN)
--		return NOTIFY_DONE;
--
--	nf_flow_table_cleanup(dev);
--
--	return NOTIFY_DONE;
--}
--
--static struct notifier_block flow_offload_netdev_notifier = {
--	.notifier_call	= flow_offload_netdev_event,
--};
--
- static int __init nft_flow_offload_module_init(void)
- {
--	int err;
--
--	err = register_netdevice_notifier(&flow_offload_netdev_notifier);
--	if (err)
--		goto err;
--
--	err = nft_register_expr(&nft_flow_offload_type);
--	if (err < 0)
--		goto register_expr;
--
--	return 0;
--
--register_expr:
--	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
--err:
--	return err;
-+	return nft_register_expr(&nft_flow_offload_type);
- }
- 
- static void __exit nft_flow_offload_module_exit(void)
- {
- 	nft_unregister_expr(&nft_flow_offload_type);
--	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
- }
- 
- module_init(nft_flow_offload_module_init);
diff --git a/target/linux/generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch b/target/linux/generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch
deleted file mode 100644
index 373a156429..0000000000
--- a/target/linux/generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch
+++ /dev/null
@@ -1,114 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 13 Jun 2018 12:33:39 +0200
-Subject: [PATCH] netfilter: nf_flow_table: fix offloaded connection timeout
- corner case
-
-The full teardown of offloaded flows is deferred to a gc work item,
-however processing of packets by netfilter needs to happen immediately
-after a teardown is requested, because the conntrack state needs to be
-fixed up.
-
-Since the IPS_OFFLOAD_BIT is still kept until the teardown is complete,
-the netfilter conntrack gc can accidentally bump the timeout of a
-connection where offload was just stopped, causing a conntrack entry
-leak.
-
-Fix this by moving the conntrack timeout bumping from conntrack core to
-the nf_flow_offload and add a check to prevent bogus timeout bumps.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/netfilter/nf_conntrack_core.c
-+++ b/net/netfilter/nf_conntrack_core.c
-@@ -1207,18 +1207,6 @@ static bool gc_worker_can_early_drop(con
- 	return false;
- }
- 
--#define	DAY	(86400 * HZ)
--
--/* Set an arbitrary timeout large enough not to ever expire, this save
-- * us a check for the IPS_OFFLOAD_BIT from the packet path via
-- * nf_ct_is_expired().
-- */
--static void nf_ct_offload_timeout(struct nf_conn *ct)
--{
--	if (nf_ct_expires(ct) < DAY / 2)
--		ct->timeout = nfct_time_stamp + DAY;
--}
--
- static void gc_worker(struct work_struct *work)
- {
- 	unsigned long end_time = jiffies + GC_SCAN_MAX_DURATION;
-@@ -1250,10 +1238,8 @@ static void gc_worker(struct work_struct
- 
- 			tmp = nf_ct_tuplehash_to_ctrack(h);
- 
--			if (test_bit(IPS_OFFLOAD_BIT, &tmp->status)) {
--				nf_ct_offload_timeout(tmp);
-+			if (test_bit(IPS_OFFLOAD_BIT, &tmp->status))
- 				continue;
--			}
- 
- 			if (nf_ct_is_expired(tmp)) {
- 				nf_ct_gc_expired(tmp);
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -198,10 +198,29 @@ static const struct rhashtable_params nf
- 	.automatic_shrinking	= true,
- };
- 
-+#define        DAY     (86400 * HZ)
-+
-+/* Set an arbitrary timeout large enough not to ever expire, this save
-+ * us a check for the IPS_OFFLOAD_BIT from the packet path via
-+ * nf_ct_is_expired().
-+ */
-+static void nf_ct_offload_timeout(struct flow_offload *flow)
-+{
-+	struct flow_offload_entry *entry;
-+	struct nf_conn *ct;
-+
-+	entry = container_of(flow, struct flow_offload_entry, flow);
-+	ct = entry->ct;
-+
-+	if (nf_ct_expires(ct) < DAY / 2)
-+		ct->timeout = nfct_time_stamp + DAY;
-+}
-+
- int flow_offload_add(struct nf_flowtable *flow_table, struct flow_offload *flow)
- {
- 	int err;
- 
-+	nf_ct_offload_timeout(flow);
- 	flow->timeout = (u32)jiffies + NF_FLOW_TIMEOUT;
- 
- 	err = rhashtable_insert_fast(&flow_table->rhashtable,
-@@ -304,6 +323,7 @@ nf_flow_table_iterate(struct nf_flowtabl
- 	rhashtable_walk_start(&hti);
- 
- 	while ((tuplehash = rhashtable_walk_next(&hti))) {
-+
- 		if (IS_ERR(tuplehash)) {
- 			if (PTR_ERR(tuplehash) != -EAGAIN) {
- 				err = PTR_ERR(tuplehash);
-@@ -328,10 +348,17 @@ static void nf_flow_offload_gc_step(stru
- {
- 	struct nf_flowtable *flow_table = data;
- 	struct flow_offload_entry *e;
-+	bool teardown;
- 
- 	e = container_of(flow, struct flow_offload_entry, flow);
--	if (nf_flow_has_expired(flow) || nf_ct_is_dying(e->ct) ||
--	    (flow->flags & (FLOW_OFFLOAD_DYING | FLOW_OFFLOAD_TEARDOWN)))
-+
-+	teardown = flow->flags & (FLOW_OFFLOAD_DYING |
-+				  FLOW_OFFLOAD_TEARDOWN);
-+
-+	if (!teardown)
-+		nf_ct_offload_timeout(flow);
-+
-+	if (nf_flow_has_expired(flow) || teardown)
- 		flow_offload_del(flow_table, flow);
- }
- 
diff --git a/target/linux/generic/backport-5.4/371-netfilter-nf_flow_table-fix-up-ct-state-of-flows-aft.patch b/target/linux/generic/backport-5.4/371-netfilter-nf_flow_table-fix-up-ct-state-of-flows-aft.patch
deleted file mode 100644
index 383641dfb7..0000000000
--- a/target/linux/generic/backport-5.4/371-netfilter-nf_flow_table-fix-up-ct-state-of-flows-aft.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 14 Jun 2018 11:20:09 +0200
-Subject: [PATCH] netfilter: nf_flow_table: fix up ct state of flows after
- timeout
-
-If a connection simply times out instead of being torn down, it is left
-active with a long timeout. Fix this by calling flow_offload_fixup_ct_state
-here as well.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -268,6 +268,9 @@ static void flow_offload_del(struct nf_f
- 	else if (flow->flags & FLOW_OFFLOAD_TEARDOWN)
- 		flow_offload_fixup_ct_timeout(e->ct);
- 
-+	if (!(flow->flags & FLOW_OFFLOAD_TEARDOWN))
-+		flow_offload_fixup_ct_state(e->ct);
-+
- 	flow_offload_free(flow);
- }
- 
diff --git a/target/linux/generic/backport-5.4/393-v5.5-sch_cake-drop-unused-variable-tin_quantum_prio.patch b/target/linux/generic/backport-5.4/393-v5.5-sch_cake-drop-unused-variable-tin_quantum_prio.patch
deleted file mode 100644
index 6c9e8ad5ee..0000000000
--- a/target/linux/generic/backport-5.4/393-v5.5-sch_cake-drop-unused-variable-tin_quantum_prio.patch
+++ /dev/null
@@ -1,158 +0,0 @@
-From d7e1738f0a0b0573ac93cf570ba3df9dee61b68e Mon Sep 17 00:00:00 2001
-From: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Date: Wed, 18 Dec 2019 14:05:13 +0000
-Subject: [PATCH 2/2] sch_cake: drop unused variable tin_quantum_prio
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Turns out tin_quantum_prio isn't used anymore and is a leftover from a
-previous implementation of diffserv tins.  Since the variable isn't used
-in any calculations it can be eliminated.
-
-Drop variable and places where it was set.  Rename remaining variable
-and consolidate naming of intermediate variables that set it.
-
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/sched/sch_cake.c | 59 ++++++++++++++------------------------------
- 1 file changed, 18 insertions(+), 41 deletions(-)
-
---- a/net/sched/sch_cake.c
-+++ b/net/sched/sch_cake.c
-@@ -173,8 +173,7 @@ struct cake_tin_data {
- 	u64	tin_rate_bps;
- 	u16	tin_rate_shft;
- 
--	u16	tin_quantum_prio;
--	u16	tin_quantum_band;
-+	u16	tin_quantum;
- 	s32	tin_deficit;
- 	u32	tin_backlog;
- 	u32	tin_dropped;
-@@ -1947,7 +1946,7 @@ begin:
- 		while (b->tin_deficit < 0 ||
- 		       !(b->sparse_flow_count + b->bulk_flow_count)) {
- 			if (b->tin_deficit <= 0)
--				b->tin_deficit += b->tin_quantum_band;
-+				b->tin_deficit += b->tin_quantum;
- 			if (b->sparse_flow_count + b->bulk_flow_count)
- 				empty = false;
- 
-@@ -2269,8 +2268,7 @@ static int cake_config_besteffort(struct
- 
- 	cake_set_rate(b, rate, mtu,
- 		      us_to_ns(q->target), us_to_ns(q->interval));
--	b->tin_quantum_band = 65535;
--	b->tin_quantum_prio = 65535;
-+	b->tin_quantum = 65535;
- 
- 	return 0;
- }
-@@ -2281,8 +2279,7 @@ static int cake_config_precedence(struct
- 	struct cake_sched_data *q = qdisc_priv(sch);
- 	u32 mtu = psched_mtu(qdisc_dev(sch));
- 	u64 rate = q->rate_bps;
--	u32 quantum1 = 256;
--	u32 quantum2 = 256;
-+	u32 quantum = 256;
- 	u32 i;
- 
- 	q->tin_cnt = 8;
-@@ -2295,18 +2292,14 @@ static int cake_config_precedence(struct
- 		cake_set_rate(b, rate, mtu, us_to_ns(q->target),
- 			      us_to_ns(q->interval));
- 
--		b->tin_quantum_prio = max_t(u16, 1U, quantum1);
--		b->tin_quantum_band = max_t(u16, 1U, quantum2);
-+		b->tin_quantum = max_t(u16, 1U, quantum);
- 
- 		/* calculate next class's parameters */
- 		rate  *= 7;
- 		rate >>= 3;
- 
--		quantum1  *= 3;
--		quantum1 >>= 1;
--
--		quantum2  *= 7;
--		quantum2 >>= 3;
-+		quantum  *= 7;
-+		quantum >>= 3;
- 	}
- 
- 	return 0;
-@@ -2375,8 +2368,7 @@ static int cake_config_diffserv8(struct
- 	struct cake_sched_data *q = qdisc_priv(sch);
- 	u32 mtu = psched_mtu(qdisc_dev(sch));
- 	u64 rate = q->rate_bps;
--	u32 quantum1 = 256;
--	u32 quantum2 = 256;
-+	u32 quantum = 256;
- 	u32 i;
- 
- 	q->tin_cnt = 8;
-@@ -2392,18 +2384,14 @@ static int cake_config_diffserv8(struct
- 		cake_set_rate(b, rate, mtu, us_to_ns(q->target),
- 			      us_to_ns(q->interval));
- 
--		b->tin_quantum_prio = max_t(u16, 1U, quantum1);
--		b->tin_quantum_band = max_t(u16, 1U, quantum2);
-+		b->tin_quantum = max_t(u16, 1U, quantum);
- 
- 		/* calculate next class's parameters */
- 		rate  *= 7;
- 		rate >>= 3;
- 
--		quantum1  *= 3;
--		quantum1 >>= 1;
--
--		quantum2  *= 7;
--		quantum2 >>= 3;
-+		quantum  *= 7;
-+		quantum >>= 3;
- 	}
- 
- 	return 0;
-@@ -2442,17 +2430,11 @@ static int cake_config_diffserv4(struct
- 	cake_set_rate(&q->tins[3], rate >> 2, mtu,
- 		      us_to_ns(q->target), us_to_ns(q->interval));
- 
--	/* priority weights */
--	q->tins[0].tin_quantum_prio = quantum;
--	q->tins[1].tin_quantum_prio = quantum >> 4;
--	q->tins[2].tin_quantum_prio = quantum << 2;
--	q->tins[3].tin_quantum_prio = quantum << 4;
--
- 	/* bandwidth-sharing weights */
--	q->tins[0].tin_quantum_band = quantum;
--	q->tins[1].tin_quantum_band = quantum >> 4;
--	q->tins[2].tin_quantum_band = quantum >> 1;
--	q->tins[3].tin_quantum_band = quantum >> 2;
-+	q->tins[0].tin_quantum = quantum;
-+	q->tins[1].tin_quantum = quantum >> 4;
-+	q->tins[2].tin_quantum = quantum >> 1;
-+	q->tins[3].tin_quantum = quantum >> 2;
- 
- 	return 0;
- }
-@@ -2483,15 +2465,10 @@ static int cake_config_diffserv3(struct
- 	cake_set_rate(&q->tins[2], rate >> 2, mtu,
- 		      us_to_ns(q->target), us_to_ns(q->interval));
- 
--	/* priority weights */
--	q->tins[0].tin_quantum_prio = quantum;
--	q->tins[1].tin_quantum_prio = quantum >> 4;
--	q->tins[2].tin_quantum_prio = quantum << 4;
--
- 	/* bandwidth-sharing weights */
--	q->tins[0].tin_quantum_band = quantum;
--	q->tins[1].tin_quantum_band = quantum >> 4;
--	q->tins[2].tin_quantum_band = quantum >> 2;
-+	q->tins[0].tin_quantum = quantum;
-+	q->tins[1].tin_quantum = quantum >> 4;
-+	q->tins[2].tin_quantum = quantum >> 2;
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-5.4/395-v5.8-net-sch_cake-Take-advantage-of-skb-hash-where-appropriate.patch b/target/linux/generic/backport-5.4/395-v5.8-net-sch_cake-Take-advantage-of-skb-hash-where-appropriate.patch
deleted file mode 100644
index a4981acdee..0000000000
--- a/target/linux/generic/backport-5.4/395-v5.8-net-sch_cake-Take-advantage-of-skb-hash-where-appropriate.patch
+++ /dev/null
@@ -1,170 +0,0 @@
-From b0c19ed6088ab41dd2a727b60594b7297c15d6ce Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= <toke@redhat.com>
-Date: Fri, 29 May 2020 14:43:44 +0200
-Subject: [PATCH] sch_cake: Take advantage of skb->hash where appropriate
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-While the other fq-based qdiscs take advantage of skb->hash and doesn't
-recompute it if it is already set, sch_cake does not.
-
-This was a deliberate choice because sch_cake hashes various parts of the
-packet header to support its advanced flow isolation modes. However,
-foregoing the use of skb->hash entirely loses a few important benefits:
-
-- When skb->hash is set by hardware, a few CPU cycles can be saved by not
-  hashing again in software.
-
-- Tunnel encapsulations will generally preserve the value of skb->hash from
-  before the encapsulation, which allows flow-based qdiscs to distinguish
-  between flows even though the outer packet header no longer has flow
-  information.
-
-It turns out that we can preserve these desirable properties in many cases,
-while still supporting the advanced flow isolation properties of sch_cake.
-This patch does so by reusing the skb->hash value as the flow_hash part of
-the hashing procedure in cake_hash() only in the following conditions:
-
-- If the skb->hash is marked as covering the flow headers (skb->l4_hash is
-  set)
-
-AND
-
-- NAT header rewriting is either disabled, or did not change any values
-  used for hashing. The latter is important to match local-origin packets
-  such as those of a tunnel endpoint.
-
-The immediate motivation for fixing this was the recent patch to WireGuard
-to preserve the skb->hash on encapsulation. As such, this is also what I
-tested against; with this patch, added latency under load for competing
-flows drops from ~8 ms to sub-1ms on an RRUL test over a WireGuard tunnel
-going through a virtual link shaped to 1Gbps using sch_cake. This matches
-the results we saw with a similar setup using sch_fq_codel when testing the
-WireGuard patch.
-
-Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
-Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
----
- net/sched/sch_cake.c | 65 ++++++++++++++++++++++++++++++++++----------
- 1 file changed, 51 insertions(+), 14 deletions(-)
-
---- a/net/sched/sch_cake.c
-+++ b/net/sched/sch_cake.c
-@@ -584,26 +584,48 @@ static bool cobalt_should_drop(struct co
- 	return drop;
- }
- 
--static void cake_update_flowkeys(struct flow_keys *keys,
-+static bool cake_update_flowkeys(struct flow_keys *keys,
- 				 const struct sk_buff *skb)
- {
- #if IS_ENABLED(CONFIG_NF_CONNTRACK)
- 	struct nf_conntrack_tuple tuple = {};
--	bool rev = !skb->_nfct;
-+	bool rev = !skb->_nfct, upd = false;
-+	__be32 ip;
- 
- 	if (skb_protocol(skb, true) != htons(ETH_P_IP))
--		return;
-+		return false;
- 
- 	if (!nf_ct_get_tuple_skb(&tuple, skb))
--		return;
-+		return false;
- 
--	keys->addrs.v4addrs.src = rev ? tuple.dst.u3.ip : tuple.src.u3.ip;
--	keys->addrs.v4addrs.dst = rev ? tuple.src.u3.ip : tuple.dst.u3.ip;
-+	ip = rev ? tuple.dst.u3.ip : tuple.src.u3.ip;
-+	if (ip != keys->addrs.v4addrs.src) {
-+		keys->addrs.v4addrs.src = ip;
-+		upd = true;
-+	}
-+	ip = rev ? tuple.src.u3.ip : tuple.dst.u3.ip;
-+	if (ip != keys->addrs.v4addrs.dst) {
-+		keys->addrs.v4addrs.dst = ip;
-+		upd = true;
-+	}
- 
- 	if (keys->ports.ports) {
--		keys->ports.src = rev ? tuple.dst.u.all : tuple.src.u.all;
--		keys->ports.dst = rev ? tuple.src.u.all : tuple.dst.u.all;
-+		__be16 port;
-+
-+		port = rev ? tuple.dst.u.all : tuple.src.u.all;
-+		if (port != keys->ports.src) {
-+			keys->ports.src = port;
-+			upd = true;
-+		}
-+		port = rev ? tuple.src.u.all : tuple.dst.u.all;
-+		if (port != keys->ports.dst) {
-+			port = keys->ports.dst;
-+			upd = true;
-+		}
- 	}
-+	return upd;
-+#else
-+	return false;
- #endif
- }
- 
-@@ -624,23 +646,36 @@ static bool cake_ddst(int flow_mode)
- static u32 cake_hash(struct cake_tin_data *q, const struct sk_buff *skb,
- 		     int flow_mode, u16 flow_override, u16 host_override)
- {
-+	bool hash_flows = (!flow_override && !!(flow_mode & CAKE_FLOW_FLOWS));
-+	bool hash_hosts = (!host_override && !!(flow_mode & CAKE_FLOW_HOSTS));
-+	bool nat_enabled = !!(flow_mode & CAKE_FLOW_NAT_FLAG);
- 	u32 flow_hash = 0, srchost_hash = 0, dsthost_hash = 0;
- 	u16 reduced_hash, srchost_idx, dsthost_idx;
- 	struct flow_keys keys, host_keys;
-+	bool use_skbhash = skb->l4_hash;
- 
- 	if (unlikely(flow_mode == CAKE_FLOW_NONE))
- 		return 0;
- 
--	/* If both overrides are set we can skip packet dissection entirely */
--	if ((flow_override || !(flow_mode & CAKE_FLOW_FLOWS)) &&
--	    (host_override || !(flow_mode & CAKE_FLOW_HOSTS)))
-+	/* If both overrides are set, or we can use the SKB hash and nat mode is
-+	 * disabled, we can skip packet dissection entirely. If nat mode is
-+	 * enabled there's another check below after doing the conntrack lookup.
-+	 */
-+	if ((!hash_flows || (use_skbhash && !nat_enabled)) && !hash_hosts)
- 		goto skip_hash;
- 
- 	skb_flow_dissect_flow_keys(skb, &keys,
- 				   FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL);
- 
--	if (flow_mode & CAKE_FLOW_NAT_FLAG)
--		cake_update_flowkeys(&keys, skb);
-+	/* Don't use the SKB hash if we change the lookup keys from conntrack */
-+	if (nat_enabled && cake_update_flowkeys(&keys, skb))
-+		use_skbhash = false;
-+
-+	/* If we can still use the SKB hash and don't need the host hash, we can
-+	 * skip the rest of the hashing procedure
-+	 */
-+	if (use_skbhash && !hash_hosts)
-+		goto skip_hash;
- 
- 	/* flow_hash_from_keys() sorts the addresses by value, so we have
- 	 * to preserve their order in a separate data structure to treat
-@@ -679,12 +714,14 @@ static u32 cake_hash(struct cake_tin_dat
- 	/* This *must* be after the above switch, since as a
- 	 * side-effect it sorts the src and dst addresses.
- 	 */
--	if (flow_mode & CAKE_FLOW_FLOWS)
-+	if (hash_flows && !use_skbhash)
- 		flow_hash = flow_hash_from_keys(&keys);
- 
- skip_hash:
- 	if (flow_override)
- 		flow_hash = flow_override - 1;
-+	else if (use_skbhash)
-+		flow_hash = skb->hash;
- 	if (host_override) {
- 		dsthost_hash = host_override - 1;
- 		srchost_hash = host_override - 1;
diff --git a/target/linux/generic/backport-5.4/399-5.9-sch_cake-add-RFC-8622-LE-PHB-support-to-CAKE-diffser.patch b/target/linux/generic/backport-5.4/399-5.9-sch_cake-add-RFC-8622-LE-PHB-support-to-CAKE-diffser.patch
deleted file mode 100644
index e171b4cec7..0000000000
--- a/target/linux/generic/backport-5.4/399-5.9-sch_cake-add-RFC-8622-LE-PHB-support-to-CAKE-diffser.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From b8392808eb3fc28e523e28cb258c81ca246deb9b Mon Sep 17 00:00:00 2001
-From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Date: Thu, 25 Jun 2020 22:18:00 +0200
-Subject: [PATCH] sch_cake: add RFC 8622 LE PHB support to CAKE diffserv
- handling
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Change tin mapping on diffserv3, 4 & 8 for LE PHB support, in essence
-making LE a member of the Bulk tin.
-
-Bulk has the least priority and minimum of 1/16th total bandwidth in the
-face of higher priority traffic.
-
-NB: Diffserv 3 & 4 swap tin 0 & 1 priorities from the default order as
-found in diffserv8, in case anyone is wondering why it looks a bit odd.
-
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-[ reword commit message slightly ]
-Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/sched/sch_cake.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/net/sched/sch_cake.c
-+++ b/net/sched/sch_cake.c
-@@ -312,8 +312,8 @@ static const u8 precedence[] = {
- };
- 
- static const u8 diffserv8[] = {
--	2, 5, 1, 2, 4, 2, 2, 2,
--	0, 2, 1, 2, 1, 2, 1, 2,
-+	2, 0, 1, 2, 4, 2, 2, 2,
-+	1, 2, 1, 2, 1, 2, 1, 2,
- 	5, 2, 4, 2, 4, 2, 4, 2,
- 	3, 2, 3, 2, 3, 2, 3, 2,
- 	6, 2, 3, 2, 3, 2, 3, 2,
-@@ -323,7 +323,7 @@ static const u8 diffserv8[] = {
- };
- 
- static const u8 diffserv4[] = {
--	0, 2, 0, 0, 2, 0, 0, 0,
-+	0, 1, 0, 0, 2, 0, 0, 0,
- 	1, 0, 0, 0, 0, 0, 0, 0,
- 	2, 0, 2, 0, 2, 0, 2, 0,
- 	2, 0, 2, 0, 2, 0, 2, 0,
-@@ -334,7 +334,7 @@ static const u8 diffserv4[] = {
- };
- 
- static const u8 diffserv3[] = {
--	0, 0, 0, 0, 2, 0, 0, 0,
-+	0, 1, 0, 0, 2, 0, 0, 0,
- 	1, 0, 0, 0, 0, 0, 0, 0,
- 	0, 0, 0, 0, 0, 0, 0, 0,
- 	0, 0, 0, 0, 0, 0, 0, 0,
diff --git a/target/linux/generic/backport-5.4/400-v5.8-dt-bindings-mtd-partition-Document-the-slc-mode-prop.patch b/target/linux/generic/backport-5.4/400-v5.8-dt-bindings-mtd-partition-Document-the-slc-mode-prop.patch
deleted file mode 100644
index 7926843686..0000000000
--- a/target/linux/generic/backport-5.4/400-v5.8-dt-bindings-mtd-partition-Document-the-slc-mode-prop.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 422928a040fe17d17ded69c57903c7908423c7ef Mon Sep 17 00:00:00 2001
-From: Boris Brezillon <bbrezillon@kernel.org>
-Date: Sun, 3 May 2020 17:53:38 +0200
-Subject: [PATCH] dt-bindings: mtd: partition: Document the slc-mode property
-
-Add a boolean property to force a specific partition attached to an MLC
-NAND to be accessed in an emulated SLC mode this making this partition
-immune to paired-pages corruptions.
-
-Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20200503155341.16712-6-miquel.raynal@bootlin.com
----
- Documentation/devicetree/bindings/mtd/partition.txt | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/Documentation/devicetree/bindings/mtd/partition.txt
-+++ b/Documentation/devicetree/bindings/mtd/partition.txt
-@@ -61,6 +61,9 @@ Optional properties:
-   clobbered.
- - lock : Do not unlock the partition at initialization time (not supported on
-   all devices)
-+- slc-mode: This parameter, if present, allows one to emulate SLC mode on a
-+  partition attached to an MLC NAND thus making this partition immune to
-+  paired-pages corruptions
- 
- Examples:
- 
diff --git a/target/linux/generic/backport-5.4/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch b/target/linux/generic/backport-5.4/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch
deleted file mode 100644
index 8aded43526..0000000000
--- a/target/linux/generic/backport-5.4/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch
+++ /dev/null
@@ -1,324 +0,0 @@
-From 04e9ab75267489224364fa510a88ada83e11c325 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 10 Dec 2020 18:23:52 +0100
-Subject: [PATCH] dt-bindings: mtd: convert "fixed-partitions" to the
- json-schema
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This standardizes its documentation, allows validating with Makefile
-checks and helps writing DTS files.
-
-Noticeable changes:
-1. Dropped "Partitions can be represented by sub-nodes of a flash
-   device." as we also support subpartitions (don't have to be part of
-   flash device node)
-2. Dropped "to Linux" as bindings are meant to be os agnostic.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20201210172352.31632-1-zajec5@gmail.com
-Signed-off-by: Rob Herring <robh@kernel.org>
----
- .../devicetree/bindings/mtd/partition.txt     | 131 +--------------
- .../mtd/partitions/fixed-partitions.yaml      | 152 ++++++++++++++++++
- 2 files changed, 154 insertions(+), 129 deletions(-)
- create mode 100644 Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
-
---- a/Documentation/devicetree/bindings/mtd/partition.txt
-+++ b/Documentation/devicetree/bindings/mtd/partition.txt
-@@ -24,137 +24,10 @@ another partitioning method.
- Available bindings are listed in the "partitions" subdirectory.
- 
- 
--Fixed Partitions
--================
--
--Partitions can be represented by sub-nodes of a flash device. This can be used
--on platforms which have strong conventions about which portions of a flash are
--used for what purposes, but which don't use an on-flash partition table such
--as RedBoot.
--
--The partition table should be a subnode of the flash node and should be named
--'partitions'. This node should have the following property:
--- compatible : (required) must be "fixed-partitions"
--Partitions are then defined in subnodes of the partitions node.
-+Deprecated: partitions defined in flash node
-+============================================
- 
- For backwards compatibility partitions as direct subnodes of the flash device are
- supported. This use is discouraged.
- NOTE: also for backwards compatibility, direct subnodes that have a compatible
- string are not considered partitions, as they may be used for other bindings.
--
--#address-cells & #size-cells must both be present in the partitions subnode of the
--flash device. There are two valid values for both:
--<1>: for partitions that require a single 32-bit cell to represent their
--     size/address (aka the value is below 4 GiB)
--<2>: for partitions that require two 32-bit cells to represent their
--     size/address (aka the value is 4 GiB or greater).
--
--Required properties:
--- reg : The partition's offset and size within the flash
--
--Optional properties:
--- label : The label / name for this partition.  If omitted, the label is taken
--  from the node name (excluding the unit address).
--- read-only : This parameter, if present, is a hint to Linux that this
--  partition should only be mounted read-only. This is usually used for flash
--  partitions containing early-boot firmware images or data which should not be
--  clobbered.
--- lock : Do not unlock the partition at initialization time (not supported on
--  all devices)
--- slc-mode: This parameter, if present, allows one to emulate SLC mode on a
--  partition attached to an MLC NAND thus making this partition immune to
--  paired-pages corruptions
--
--Examples:
--
--
--flash@0 {
--	partitions {
--		compatible = "fixed-partitions";
--		#address-cells = <1>;
--		#size-cells = <1>;
--
--		partition@0 {
--			label = "u-boot";
--			reg = <0x0000000 0x100000>;
--			read-only;
--		};
--
--		uimage@100000 {
--			reg = <0x0100000 0x200000>;
--		};
--	};
--};
--
--flash@1 {
--	partitions {
--		compatible = "fixed-partitions";
--		#address-cells = <1>;
--		#size-cells = <2>;
--
--		/* a 4 GiB partition */
--		partition@0 {
--			label = "filesystem";
--			reg = <0x00000000 0x1 0x00000000>;
--		};
--	};
--};
--
--flash@2 {
--	partitions {
--		compatible = "fixed-partitions";
--		#address-cells = <2>;
--		#size-cells = <2>;
--
--		/* an 8 GiB partition */
--		partition@0 {
--			label = "filesystem #1";
--			reg = <0x0 0x00000000 0x2 0x00000000>;
--		};
--
--		/* a 4 GiB partition */
--		partition@200000000 {
--			label = "filesystem #2";
--			reg = <0x2 0x00000000 0x1 0x00000000>;
--		};
--	};
--};
--
--flash@3 {
--	partitions {
--		compatible = "fixed-partitions";
--		#address-cells = <1>;
--		#size-cells = <1>;
--
--		partition@0 {
--			label = "bootloader";
--			reg = <0x000000 0x100000>;
--			read-only;
--		};
--
--		firmware@100000 {
--			label = "firmware";
--			reg = <0x100000 0xe00000>;
--			compatible = "brcm,trx";
--		};
--
--		calibration@f00000 {
--			label = "calibration";
--			reg = <0xf00000 0x100000>;
--			compatible = "fixed-partitions";
--			ranges = <0 0xf00000 0x100000>;
--			#address-cells = <1>;
--			#size-cells = <1>;
--
--			partition@0 {
--				label = "wifi0";
--				reg = <0x000000 0x080000>;
--			};
--
--			partition@80000 {
--				label = "wifi1";
--				reg = <0x080000 0x080000>;
--			};
--		};
--	};
--};
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
-@@ -0,0 +1,152 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mtd/partitions/fixed-partitions.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Fixed partitions
-+
-+description: |
-+  This binding can be used on platforms which have strong conventions about
-+  which portions of a flash are used for what purposes, but which don't use an
-+  on-flash partition table such as RedBoot.
-+
-+  The partition table should be a node named "partitions". Partitions are then
-+  defined as subnodes.
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  compatible:
-+    const: fixed-partitions
-+
-+  "#address-cells": true
-+
-+  "#size-cells": true
-+
-+patternProperties:
-+  "@[0-9a-f]+$":
-+    description: node describing a single flash partition
-+    type: object
-+
-+    properties:
-+      reg:
-+        description: partition's offset and size within the flash
-+        maxItems: 1
-+
-+      label:
-+        description: The label / name for this partition. If omitted, the label
-+          is taken from the node name (excluding the unit address).
-+
-+      read-only:
-+        description: This parameter, if present, is a hint that this partition
-+          should only be mounted read-only. This is usually used for flash
-+          partitions containing early-boot firmware images or data which should
-+          not be clobbered.
-+        type: boolean
-+
-+      lock:
-+        description: Do not unlock the partition at initialization time (not
-+          supported on all devices)
-+        type: boolean
-+
-+      slc-mode:
-+        description: This parameter, if present, allows one to emulate SLC mode
-+          on a partition attached to an MLC NAND thus making this partition
-+          immune to paired-pages corruptions
-+        type: boolean
-+
-+    required:
-+      - reg
-+
-+required:
-+  - "#address-cells"
-+  - "#size-cells"
-+
-+additionalProperties: true
-+
-+examples:
-+  - |
-+    partitions {
-+        compatible = "fixed-partitions";
-+        #address-cells = <1>;
-+        #size-cells = <1>;
-+
-+        partition@0 {
-+            label = "u-boot";
-+            reg = <0x0000000 0x100000>;
-+            read-only;
-+        };
-+
-+        uimage@100000 {
-+            reg = <0x0100000 0x200000>;
-+        };
-+    };
-+  - |
-+    partitions {
-+        compatible = "fixed-partitions";
-+        #address-cells = <1>;
-+        #size-cells = <2>;
-+
-+        /* a 4 GiB partition */
-+        partition@0 {
-+            label = "filesystem";
-+            reg = <0x00000000 0x1 0x00000000>;
-+        };
-+    };
-+  - |
-+    partitions {
-+        compatible = "fixed-partitions";
-+        #address-cells = <2>;
-+        #size-cells = <2>;
-+
-+        /* an 8 GiB partition */
-+        partition@0 {
-+            label = "filesystem #1";
-+            reg = <0x0 0x00000000 0x2 0x00000000>;
-+        };
-+
-+        /* a 4 GiB partition */
-+        partition@200000000 {
-+            label = "filesystem #2";
-+            reg = <0x2 0x00000000 0x1 0x00000000>;
-+        };
-+    };
-+  - |
-+    partitions {
-+        compatible = "fixed-partitions";
-+        #address-cells = <1>;
-+        #size-cells = <1>;
-+
-+        partition@0 {
-+            label = "bootloader";
-+            reg = <0x000000 0x100000>;
-+            read-only;
-+        };
-+
-+        firmware@100000 {
-+            compatible = "brcm,trx";
-+            label = "firmware";
-+            reg = <0x100000 0xe00000>;
-+        };
-+
-+        calibration@f00000 {
-+            compatible = "fixed-partitions";
-+            label = "calibration";
-+            reg = <0xf00000 0x100000>;
-+            ranges = <0 0xf00000 0x100000>;
-+            #address-cells = <1>;
-+            #size-cells = <1>;
-+
-+            partition@0 {
-+                label = "wifi0";
-+                reg = <0x000000 0x080000>;
-+            };
-+
-+            partition@80000 {
-+                label = "wifi1";
-+                reg = <0x080000 0x080000>;
-+            };
-+        };
-+    };
diff --git a/target/linux/generic/backport-5.4/402-v5.12-0001-dt-bindings-mtd-move-partition-binding-to-its-own-fi.patch b/target/linux/generic/backport-5.4/402-v5.12-0001-dt-bindings-mtd-move-partition-binding-to-its-own-fi.patch
deleted file mode 100644
index f3b1179ecd..0000000000
--- a/target/linux/generic/backport-5.4/402-v5.12-0001-dt-bindings-mtd-move-partition-binding-to-its-own-fi.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 6418522022c706fd867b00b2571edba48b8fa8c7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 23:04:25 +0100
-Subject: [PATCH] dt-bindings: mtd: move partition binding to its own file
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Single partition binding is quite common and may be:
-1. Used by multiple parsers
-2. Extended for more specific cases
-
-Move it to separated file to avoid code duplication.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Richard Weinberger <richard@nod.at>
----
- .../mtd/partitions/fixed-partitions.yaml      | 33 +------------
- .../bindings/mtd/partitions/partition.yaml    | 47 +++++++++++++++++++
- 2 files changed, 48 insertions(+), 32 deletions(-)
- create mode 100644 Documentation/devicetree/bindings/mtd/partitions/partition.yaml
-
---- a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
-+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
-@@ -27,38 +27,7 @@ properties:
- 
- patternProperties:
-   "@[0-9a-f]+$":
--    description: node describing a single flash partition
--    type: object
--
--    properties:
--      reg:
--        description: partition's offset and size within the flash
--        maxItems: 1
--
--      label:
--        description: The label / name for this partition. If omitted, the label
--          is taken from the node name (excluding the unit address).
--
--      read-only:
--        description: This parameter, if present, is a hint that this partition
--          should only be mounted read-only. This is usually used for flash
--          partitions containing early-boot firmware images or data which should
--          not be clobbered.
--        type: boolean
--
--      lock:
--        description: Do not unlock the partition at initialization time (not
--          supported on all devices)
--        type: boolean
--
--      slc-mode:
--        description: This parameter, if present, allows one to emulate SLC mode
--          on a partition attached to an MLC NAND thus making this partition
--          immune to paired-pages corruptions
--        type: boolean
--
--    required:
--      - reg
-+    $ref: "partition.yaml#"
- 
- required:
-   - "#address-cells"
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
-@@ -0,0 +1,47 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mtd/partitions/partition.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Partition
-+
-+description: |
-+  This binding describes a single flash partition. Each partition must have its
-+  relative offset and size specified. Depending on partition function extra
-+  properties can be used.
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  reg:
-+    description: partition's offset and size within the flash
-+    maxItems: 1
-+
-+  label:
-+    description: The label / name for this partition. If omitted, the label
-+      is taken from the node name (excluding the unit address).
-+
-+  read-only:
-+    description: This parameter, if present, is a hint that this partition
-+      should only be mounted read-only. This is usually used for flash
-+      partitions containing early-boot firmware images or data which should
-+      not be clobbered.
-+    type: boolean
-+
-+  lock:
-+    description: Do not unlock the partition at initialization time (not
-+      supported on all devices)
-+    type: boolean
-+
-+  slc-mode:
-+    description: This parameter, if present, allows one to emulate SLC mode
-+      on a partition attached to an MLC NAND thus making this partition
-+      immune to paired-pages corruptions
-+    type: boolean
-+
-+required:
-+  - reg
-+
-+additionalProperties: true
diff --git a/target/linux/generic/backport-5.4/402-v5.12-0002-dt-bindings-mtd-add-binding-for-BCM4908-partitions.patch b/target/linux/generic/backport-5.4/402-v5.12-0002-dt-bindings-mtd-add-binding-for-BCM4908-partitions.patch
deleted file mode 100644
index 8576c7d78d..0000000000
--- a/target/linux/generic/backport-5.4/402-v5.12-0002-dt-bindings-mtd-add-binding-for-BCM4908-partitions.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 6e9dff6fe3fbc452f16566e4a7e293b0decefdba Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 23:04:26 +0100
-Subject: [PATCH] dt-bindings: mtd: add binding for BCM4908 partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 uses fixed partitions layout but function of some partitions may
-vary. Some devices use multiple firmware partitions and those partitions
-should be marked to let system discover their purpose.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Richard Weinberger <richard@nod.at>
----
- .../partitions/brcm,bcm4908-partitions.yaml   | 70 +++++++++++++++++++
- 1 file changed, 70 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
-@@ -0,0 +1,70 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mtd/partitions/brcm,bcm4908-partitions.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom BCM4908 partitioning
-+
-+description: |
-+  Broadcom BCM4908 CFE bootloader supports two firmware partitions. One is used
-+  for regular booting, the other is treated as fallback.
-+
-+  This binding allows defining all fixed partitions and marking those containing
-+  firmware. System can use that information e.g. for booting or flashing
-+  purposes.
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  compatible:
-+    const: brcm,bcm4908-partitions
-+
-+  "#address-cells":
-+    enum: [ 1, 2 ]
-+
-+  "#size-cells":
-+    enum: [ 1, 2 ]
-+
-+patternProperties:
-+  "^partition@[0-9a-f]+$":
-+    $ref: "partition.yaml#"
-+    properties:
-+      compatible:
-+        const: brcm,bcm4908-firmware
-+    unevaluatedProperties: false
-+
-+required:
-+  - "#address-cells"
-+  - "#size-cells"
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    partitions {
-+        compatible = "brcm,bcm4908-partitions";
-+        #address-cells = <1>;
-+        #size-cells = <1>;
-+
-+        partition@0 {
-+            label = "cferom";
-+            reg = <0x0 0x100000>;
-+        };
-+
-+        partition@100000 {
-+            compatible = "brcm,bcm4908-firmware";
-+            reg = <0x100000 0xf00000>;
-+        };
-+
-+        partition@1000000 {
-+            compatible = "brcm,bcm4908-firmware";
-+            reg = <0x1000000 0xf00000>;
-+        };
-+
-+        partition@1f00000 {
-+            label = "calibration";
-+            reg = <0x1f00000 0x100000>;
-+        };
-+    };
diff --git a/target/linux/generic/backport-5.4/403-v5.13-mtd-parsers-ofpart-support-BCM4908-fixed-partitions.patch b/target/linux/generic/backport-5.4/403-v5.13-mtd-parsers-ofpart-support-BCM4908-fixed-partitions.patch
deleted file mode 100644
index 8f292bd177..0000000000
--- a/target/linux/generic/backport-5.4/403-v5.13-mtd-parsers-ofpart-support-BCM4908-fixed-partitions.patch
+++ /dev/null
@@ -1,648 +0,0 @@
-From afbef8efb591792579c633a7c545f914c6165f82 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 23:04:27 +0100
-Subject: [PATCH] mtd: parsers: ofpart: support BCM4908 fixed partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some devices use fixed partitioning with some partitions requiring some
-extra logic. E.g. BCM4908 may have multiple firmware partitions but
-detecting currently used one requires checking bootloader parameters.
-
-To support such cases without duplicating a lot of code (without copying
-most of the ofpart.c code) support for post-parsing callback was added.
-
-BCM4908 support in ofpart can be enabled using config option and results
-in compiling & executing a specific callback. It simply reads offset of
-currently used firmware partition from the DT. Bootloader specifies it
-using the "brcm_blparms" property.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/mtd/parsers/Kconfig                   |  9 +++
- drivers/mtd/parsers/Makefile                  |  2 +
- drivers/mtd/parsers/ofpart_bcm4908.c          | 64 +++++++++++++++++++
- drivers/mtd/parsers/ofpart_bcm4908.h          | 15 +++++
- .../mtd/parsers/{ofpart.c => ofpart_core.c}   | 28 +++++++-
- 5 files changed, 116 insertions(+), 2 deletions(-)
- create mode 100644 drivers/mtd/parsers/ofpart_bcm4908.c
- create mode 100644 drivers/mtd/parsers/ofpart_bcm4908.h
- rename drivers/mtd/parsers/{ofpart.c => ofpart_core.c} (88%)
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -67,6 +67,15 @@ config MTD_OF_PARTS
- 	  flash memory node, as described in
- 	  Documentation/devicetree/bindings/mtd/partition.txt.
- 
-+config MTD_OF_PARTS_BCM4908
-+	bool "BCM4908 partitioning support"
-+	depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST)
-+	default ARCH_BCM4908
-+	help
-+	  This provides partitions parser for BCM4908 family devices
-+	  that can have multiple "firmware" partitions. It takes care of
-+	  finding currently used one and backup ones.
-+
- config MTD_PARSER_IMAGETAG
- 	tristate "Parser for BCM963XX Image Tag format partitions"
- 	depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -4,6 +4,8 @@ obj-$(CONFIG_MTD_BCM47XX_PARTS)		+= bcm4
- obj-$(CONFIG_MTD_BCM63XX_PARTS)		+= bcm63xxpart.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS)		+= cmdlinepart.o
- obj-$(CONFIG_MTD_OF_PARTS)		+= ofpart.o
-+ofpart-y				+= ofpart_core.o
-+ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908)	+= ofpart_bcm4908.o
- obj-$(CONFIG_MTD_PARSER_IMAGETAG)	+= parser_imagetag.o
- obj-$(CONFIG_MTD_AFS_PARTS)		+= afs.o
- obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
---- /dev/null
-+++ b/drivers/mtd/parsers/ofpart_bcm4908.c
-@@ -0,0 +1,64 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/of.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include "ofpart_bcm4908.h"
-+
-+#define BLPARAMS_FW_OFFSET		"NAND_RFS_OFS"
-+
-+static long long bcm4908_partitions_fw_offset(void)
-+{
-+	struct device_node *root;
-+	struct property *prop;
-+	const char *s;
-+
-+	root = of_find_node_by_path("/");
-+	if (!root)
-+		return -ENOENT;
-+
-+	of_property_for_each_string(root, "brcm_blparms", prop, s) {
-+		size_t len = strlen(BLPARAMS_FW_OFFSET);
-+		unsigned long offset;
-+		int err;
-+
-+		if (strncmp(s, BLPARAMS_FW_OFFSET, len) || s[len] != '=')
-+			continue;
-+
-+		err = kstrtoul(s + len + 1, 0, &offset);
-+		if (err) {
-+			pr_err("failed to parse %s\n", s + len + 1);
-+			return err;
-+		}
-+
-+		return offset << 10;
-+	}
-+
-+	return -ENOENT;
-+}
-+
-+int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts)
-+{
-+	long long fw_offset;
-+	int i;
-+
-+	fw_offset = bcm4908_partitions_fw_offset();
-+
-+	for (i = 0; i < nr_parts; i++) {
-+		if (of_device_is_compatible(parts[i].of_node, "brcm,bcm4908-firmware")) {
-+			if (fw_offset < 0 || parts[i].offset == fw_offset)
-+				parts[i].name = "firmware";
-+			else
-+				parts[i].name = "backup";
-+		}
-+	}
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/mtd/parsers/ofpart_bcm4908.h
-@@ -0,0 +1,15 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+#ifndef __BCM4908_PARTITIONS_H
-+#define __BCM4908_PARTITIONS_H
-+
-+#ifdef CONFIG_MTD_OF_PARTS_BCM4908
-+int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts);
-+#else
-+static inline int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts,
-+						int nr_parts)
-+{
-+	return -EOPNOTSUPP;
-+}
-+#endif
-+
-+#endif
---- a/drivers/mtd/parsers/ofpart.c
-+++ /dev/null
-@@ -1,236 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-or-later
--/*
-- * Flash partitions described by the OF (or flattened) device tree
-- *
-- * Copyright © 2006 MontaVista Software Inc.
-- * Author: Vitaly Wool <vwool@ru.mvista.com>
-- *
-- * Revised to handle newer style flash binding by:
-- *   Copyright © 2007 David Gibson, IBM Corporation.
-- */
--
--#include <linux/module.h>
--#include <linux/init.h>
--#include <linux/of.h>
--#include <linux/mtd/mtd.h>
--#include <linux/slab.h>
--#include <linux/mtd/partitions.h>
--
--static bool node_has_compatible(struct device_node *pp)
--{
--	return of_get_property(pp, "compatible", NULL);
--}
--
--static int parse_fixed_partitions(struct mtd_info *master,
--				  const struct mtd_partition **pparts,
--				  struct mtd_part_parser_data *data)
--{
--	struct mtd_partition *parts;
--	struct device_node *mtd_node;
--	struct device_node *ofpart_node;
--	const char *partname;
--	struct device_node *pp;
--	int nr_parts, i, ret = 0;
--	bool dedicated = true;
--
--
--	/* Pull of_node from the master device node */
--	mtd_node = mtd_get_of_node(master);
--	if (!mtd_node)
--		return 0;
--
--	ofpart_node = of_get_child_by_name(mtd_node, "partitions");
--	if (!ofpart_node) {
--		/*
--		 * We might get here even when ofpart isn't used at all (e.g.,
--		 * when using another parser), so don't be louder than
--		 * KERN_DEBUG
--		 */
--		pr_debug("%s: 'partitions' subnode not found on %pOF. Trying to parse direct subnodes as partitions.\n",
--			 master->name, mtd_node);
--		ofpart_node = mtd_node;
--		dedicated = false;
--	} else if (!of_device_is_compatible(ofpart_node, "fixed-partitions")) {
--		/* The 'partitions' subnode might be used by another parser */
--		return 0;
--	}
--
--	/* First count the subnodes */
--	nr_parts = 0;
--	for_each_child_of_node(ofpart_node,  pp) {
--		if (!dedicated && node_has_compatible(pp))
--			continue;
--
--		nr_parts++;
--	}
--
--	if (nr_parts == 0)
--		return 0;
--
--	parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL);
--	if (!parts)
--		return -ENOMEM;
--
--	i = 0;
--	for_each_child_of_node(ofpart_node,  pp) {
--		const __be32 *reg;
--		int len;
--		int a_cells, s_cells;
--
--		if (!dedicated && node_has_compatible(pp))
--			continue;
--
--		reg = of_get_property(pp, "reg", &len);
--		if (!reg) {
--			if (dedicated) {
--				pr_debug("%s: ofpart partition %pOF (%pOF) missing reg property.\n",
--					 master->name, pp,
--					 mtd_node);
--				goto ofpart_fail;
--			} else {
--				nr_parts--;
--				continue;
--			}
--		}
--
--		a_cells = of_n_addr_cells(pp);
--		s_cells = of_n_size_cells(pp);
--		if (len / 4 != a_cells + s_cells) {
--			pr_debug("%s: ofpart partition %pOF (%pOF) error parsing reg property.\n",
--				 master->name, pp,
--				 mtd_node);
--			goto ofpart_fail;
--		}
--
--		parts[i].offset = of_read_number(reg, a_cells);
--		parts[i].size = of_read_number(reg + a_cells, s_cells);
--		parts[i].of_node = pp;
--
--		partname = of_get_property(pp, "label", &len);
--		if (!partname)
--			partname = of_get_property(pp, "name", &len);
--		parts[i].name = partname;
--
--		if (of_get_property(pp, "read-only", &len))
--			parts[i].mask_flags |= MTD_WRITEABLE;
--
--		if (of_get_property(pp, "lock", &len))
--			parts[i].mask_flags |= MTD_POWERUP_LOCK;
--
--		i++;
--	}
--
--	if (!nr_parts)
--		goto ofpart_none;
--
--	*pparts = parts;
--	return nr_parts;
--
--ofpart_fail:
--	pr_err("%s: error parsing ofpart partition %pOF (%pOF)\n",
--	       master->name, pp, mtd_node);
--	ret = -EINVAL;
--ofpart_none:
--	of_node_put(pp);
--	kfree(parts);
--	return ret;
--}
--
--static const struct of_device_id parse_ofpart_match_table[] = {
--	{ .compatible = "fixed-partitions" },
--	{},
--};
--MODULE_DEVICE_TABLE(of, parse_ofpart_match_table);
--
--static struct mtd_part_parser ofpart_parser = {
--	.parse_fn = parse_fixed_partitions,
--	.name = "fixed-partitions",
--	.of_match_table = parse_ofpart_match_table,
--};
--
--static int parse_ofoldpart_partitions(struct mtd_info *master,
--				      const struct mtd_partition **pparts,
--				      struct mtd_part_parser_data *data)
--{
--	struct mtd_partition *parts;
--	struct device_node *dp;
--	int i, plen, nr_parts;
--	const struct {
--		__be32 offset, len;
--	} *part;
--	const char *names;
--
--	/* Pull of_node from the master device node */
--	dp = mtd_get_of_node(master);
--	if (!dp)
--		return 0;
--
--	part = of_get_property(dp, "partitions", &plen);
--	if (!part)
--		return 0; /* No partitions found */
--
--	pr_warn("Device tree uses obsolete partition map binding: %pOF\n", dp);
--
--	nr_parts = plen / sizeof(part[0]);
--
--	parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL);
--	if (!parts)
--		return -ENOMEM;
--
--	names = of_get_property(dp, "partition-names", &plen);
--
--	for (i = 0; i < nr_parts; i++) {
--		parts[i].offset = be32_to_cpu(part->offset);
--		parts[i].size   = be32_to_cpu(part->len) & ~1;
--		/* bit 0 set signifies read only partition */
--		if (be32_to_cpu(part->len) & 1)
--			parts[i].mask_flags = MTD_WRITEABLE;
--
--		if (names && (plen > 0)) {
--			int len = strlen(names) + 1;
--
--			parts[i].name = names;
--			plen -= len;
--			names += len;
--		} else {
--			parts[i].name = "unnamed";
--		}
--
--		part++;
--	}
--
--	*pparts = parts;
--	return nr_parts;
--}
--
--static struct mtd_part_parser ofoldpart_parser = {
--	.parse_fn = parse_ofoldpart_partitions,
--	.name = "ofoldpart",
--};
--
--static int __init ofpart_parser_init(void)
--{
--	register_mtd_parser(&ofpart_parser);
--	register_mtd_parser(&ofoldpart_parser);
--	return 0;
--}
--
--static void __exit ofpart_parser_exit(void)
--{
--	deregister_mtd_parser(&ofpart_parser);
--	deregister_mtd_parser(&ofoldpart_parser);
--}
--
--module_init(ofpart_parser_init);
--module_exit(ofpart_parser_exit);
--
--MODULE_LICENSE("GPL");
--MODULE_DESCRIPTION("Parser for MTD partitioning information in device tree");
--MODULE_AUTHOR("Vitaly Wool, David Gibson");
--/*
-- * When MTD core cannot find the requested parser, it tries to load the module
-- * with the same name. Since we provide the ofoldpart parser, we should have
-- * the corresponding alias.
-- */
--MODULE_ALIAS("fixed-partitions");
--MODULE_ALIAS("ofoldpart");
---- /dev/null
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -0,0 +1,260 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * Flash partitions described by the OF (or flattened) device tree
-+ *
-+ * Copyright © 2006 MontaVista Software Inc.
-+ * Author: Vitaly Wool <vwool@ru.mvista.com>
-+ *
-+ * Revised to handle newer style flash binding by:
-+ *   Copyright © 2007 David Gibson, IBM Corporation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/of.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include "ofpart_bcm4908.h"
-+
-+struct fixed_partitions_quirks {
-+	int (*post_parse)(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts);
-+};
-+
-+struct fixed_partitions_quirks bcm4908_partitions_quirks = {
-+	.post_parse = bcm4908_partitions_post_parse,
-+};
-+
-+static const struct of_device_id parse_ofpart_match_table[];
-+
-+static bool node_has_compatible(struct device_node *pp)
-+{
-+	return of_get_property(pp, "compatible", NULL);
-+}
-+
-+static int parse_fixed_partitions(struct mtd_info *master,
-+				  const struct mtd_partition **pparts,
-+				  struct mtd_part_parser_data *data)
-+{
-+	const struct fixed_partitions_quirks *quirks;
-+	const struct of_device_id *of_id;
-+	struct mtd_partition *parts;
-+	struct device_node *mtd_node;
-+	struct device_node *ofpart_node;
-+	const char *partname;
-+	struct device_node *pp;
-+	int nr_parts, i, ret = 0;
-+	bool dedicated = true;
-+
-+	/* Pull of_node from the master device node */
-+	mtd_node = mtd_get_of_node(master);
-+	if (!mtd_node)
-+		return 0;
-+
-+	ofpart_node = of_get_child_by_name(mtd_node, "partitions");
-+	if (!ofpart_node) {
-+		/*
-+		 * We might get here even when ofpart isn't used at all (e.g.,
-+		 * when using another parser), so don't be louder than
-+		 * KERN_DEBUG
-+		 */
-+		pr_debug("%s: 'partitions' subnode not found on %pOF. Trying to parse direct subnodes as partitions.\n",
-+			 master->name, mtd_node);
-+		ofpart_node = mtd_node;
-+		dedicated = false;
-+	}
-+
-+	of_id = of_match_node(parse_ofpart_match_table, ofpart_node);
-+	if (dedicated && !of_id) {
-+		/* The 'partitions' subnode might be used by another parser */
-+		return 0;
-+	}
-+
-+	quirks = of_id ? of_id->data : NULL;
-+
-+	/* First count the subnodes */
-+	nr_parts = 0;
-+	for_each_child_of_node(ofpart_node,  pp) {
-+		if (!dedicated && node_has_compatible(pp))
-+			continue;
-+
-+		nr_parts++;
-+	}
-+
-+	if (nr_parts == 0)
-+		return 0;
-+
-+	parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL);
-+	if (!parts)
-+		return -ENOMEM;
-+
-+	i = 0;
-+	for_each_child_of_node(ofpart_node,  pp) {
-+		const __be32 *reg;
-+		int len;
-+		int a_cells, s_cells;
-+
-+		if (!dedicated && node_has_compatible(pp))
-+			continue;
-+
-+		reg = of_get_property(pp, "reg", &len);
-+		if (!reg) {
-+			if (dedicated) {
-+				pr_debug("%s: ofpart partition %pOF (%pOF) missing reg property.\n",
-+					 master->name, pp,
-+					 mtd_node);
-+				goto ofpart_fail;
-+			} else {
-+				nr_parts--;
-+				continue;
-+			}
-+		}
-+
-+		a_cells = of_n_addr_cells(pp);
-+		s_cells = of_n_size_cells(pp);
-+		if (len / 4 != a_cells + s_cells) {
-+			pr_debug("%s: ofpart partition %pOF (%pOF) error parsing reg property.\n",
-+				 master->name, pp,
-+				 mtd_node);
-+			goto ofpart_fail;
-+		}
-+
-+		parts[i].offset = of_read_number(reg, a_cells);
-+		parts[i].size = of_read_number(reg + a_cells, s_cells);
-+		parts[i].of_node = pp;
-+
-+		partname = of_get_property(pp, "label", &len);
-+		if (!partname)
-+			partname = of_get_property(pp, "name", &len);
-+		parts[i].name = partname;
-+
-+		if (of_get_property(pp, "read-only", &len))
-+			parts[i].mask_flags |= MTD_WRITEABLE;
-+
-+		if (of_get_property(pp, "lock", &len))
-+			parts[i].mask_flags |= MTD_POWERUP_LOCK;
-+
-+		i++;
-+	}
-+
-+	if (!nr_parts)
-+		goto ofpart_none;
-+
-+	if (quirks && quirks->post_parse)
-+		quirks->post_parse(master, parts, nr_parts);
-+
-+	*pparts = parts;
-+	return nr_parts;
-+
-+ofpart_fail:
-+	pr_err("%s: error parsing ofpart partition %pOF (%pOF)\n",
-+	       master->name, pp, mtd_node);
-+	ret = -EINVAL;
-+ofpart_none:
-+	of_node_put(pp);
-+	kfree(parts);
-+	return ret;
-+}
-+
-+static const struct of_device_id parse_ofpart_match_table[] = {
-+	/* Generic */
-+	{ .compatible = "fixed-partitions" },
-+	/* Customized */
-+	{ .compatible = "brcm,bcm4908-partitions", .data = &bcm4908_partitions_quirks, },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, parse_ofpart_match_table);
-+
-+static struct mtd_part_parser ofpart_parser = {
-+	.parse_fn = parse_fixed_partitions,
-+	.name = "fixed-partitions",
-+	.of_match_table = parse_ofpart_match_table,
-+};
-+
-+static int parse_ofoldpart_partitions(struct mtd_info *master,
-+				      const struct mtd_partition **pparts,
-+				      struct mtd_part_parser_data *data)
-+{
-+	struct mtd_partition *parts;
-+	struct device_node *dp;
-+	int i, plen, nr_parts;
-+	const struct {
-+		__be32 offset, len;
-+	} *part;
-+	const char *names;
-+
-+	/* Pull of_node from the master device node */
-+	dp = mtd_get_of_node(master);
-+	if (!dp)
-+		return 0;
-+
-+	part = of_get_property(dp, "partitions", &plen);
-+	if (!part)
-+		return 0; /* No partitions found */
-+
-+	pr_warn("Device tree uses obsolete partition map binding: %pOF\n", dp);
-+
-+	nr_parts = plen / sizeof(part[0]);
-+
-+	parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL);
-+	if (!parts)
-+		return -ENOMEM;
-+
-+	names = of_get_property(dp, "partition-names", &plen);
-+
-+	for (i = 0; i < nr_parts; i++) {
-+		parts[i].offset = be32_to_cpu(part->offset);
-+		parts[i].size   = be32_to_cpu(part->len) & ~1;
-+		/* bit 0 set signifies read only partition */
-+		if (be32_to_cpu(part->len) & 1)
-+			parts[i].mask_flags = MTD_WRITEABLE;
-+
-+		if (names && (plen > 0)) {
-+			int len = strlen(names) + 1;
-+
-+			parts[i].name = names;
-+			plen -= len;
-+			names += len;
-+		} else {
-+			parts[i].name = "unnamed";
-+		}
-+
-+		part++;
-+	}
-+
-+	*pparts = parts;
-+	return nr_parts;
-+}
-+
-+static struct mtd_part_parser ofoldpart_parser = {
-+	.parse_fn = parse_ofoldpart_partitions,
-+	.name = "ofoldpart",
-+};
-+
-+static int __init ofpart_parser_init(void)
-+{
-+	register_mtd_parser(&ofpart_parser);
-+	register_mtd_parser(&ofoldpart_parser);
-+	return 0;
-+}
-+
-+static void __exit ofpart_parser_exit(void)
-+{
-+	deregister_mtd_parser(&ofpart_parser);
-+	deregister_mtd_parser(&ofoldpart_parser);
-+}
-+
-+module_init(ofpart_parser_init);
-+module_exit(ofpart_parser_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Parser for MTD partitioning information in device tree");
-+MODULE_AUTHOR("Vitaly Wool, David Gibson");
-+/*
-+ * When MTD core cannot find the requested parser, it tries to load the module
-+ * with the same name. Since we provide the ofoldpart parser, we should have
-+ * the corresponding alias.
-+ */
-+MODULE_ALIAS("fixed-partitions");
-+MODULE_ALIAS("ofoldpart");
diff --git a/target/linux/generic/backport-5.4/404-v5.13-mtd-parsers-ofpart-limit-parsing-of-deprecated-DT-sy.patch b/target/linux/generic/backport-5.4/404-v5.13-mtd-parsers-ofpart-limit-parsing-of-deprecated-DT-sy.patch
deleted file mode 100644
index 35058adba7..0000000000
--- a/target/linux/generic/backport-5.4/404-v5.13-mtd-parsers-ofpart-limit-parsing-of-deprecated-DT-sy.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 2d751203aacf86a1b301a188d8551c7da91043ab Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 2 Mar 2021 20:00:12 +0100
-Subject: [PATCH] mtd: parsers: ofpart: limit parsing of deprecated DT syntax
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-For backward compatibility ofpart still supports the old syntax like:
-spi-flash@0 {
-	compatible = "jedec,spi-nor";
-	reg = <0x0>;
-
-	partition@0 {
-		label = "bootloader";
-		reg = <0x0 0x100000>;
-	};
-};
-(without "partitions" subnode).
-
-There is no reason however to support nested partitions without a clear
-"compatible" string like:
-partitions {
-	compatible = "fixed-partitions";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	partition@0 {
-		label = "bootloader";
-		reg = <0x0 0x100000>;
-
-		partition@0 {
-			label = "config";
-			reg = <0x80000 0x80000>;
-		};
-	};
-};
-(we never officially supported or documented that).
-
-Make sure ofpart doesn't attempt to parse above.
-
-Cc: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210302190012.1255-1-zajec5@gmail.com
----
- drivers/mtd/parsers/ofpart_core.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -53,7 +53,7 @@ static int parse_fixed_partitions(struct
- 		return 0;
- 
- 	ofpart_node = of_get_child_by_name(mtd_node, "partitions");
--	if (!ofpart_node) {
-+	if (!ofpart_node && !mtd_is_partition(master)) {
- 		/*
- 		 * We might get here even when ofpart isn't used at all (e.g.,
- 		 * when using another parser), so don't be louder than
-@@ -64,6 +64,8 @@ static int parse_fixed_partitions(struct
- 		ofpart_node = mtd_node;
- 		dedicated = false;
- 	}
-+	if (!ofpart_node)
-+		return 0;
- 
- 	of_id = of_match_node(parse_ofpart_match_table, ofpart_node);
- 	if (dedicated && !of_id) {
diff --git a/target/linux/generic/backport-5.4/405-v5.13-mtd-parsers-ofpart-make-symbol-bcm4908_partitions_qu.patch b/target/linux/generic/backport-5.4/405-v5.13-mtd-parsers-ofpart-make-symbol-bcm4908_partitions_qu.patch
deleted file mode 100644
index f1b778a6e1..0000000000
--- a/target/linux/generic/backport-5.4/405-v5.13-mtd-parsers-ofpart-make-symbol-bcm4908_partitions_qu.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From b87b6d2d6f540e29c3f98e1572d64e560d73d6c1 Mon Sep 17 00:00:00 2001
-From: Wei Yongjun <weiyongjun1@huawei.com>
-Date: Thu, 4 Mar 2021 06:46:00 +0000
-Subject: [PATCH] mtd: parsers: ofpart: make symbol 'bcm4908_partitions_quirks'
- static
-
-The sparse tool complains as follows:
-
-drivers/mtd/parsers/ofpart_core.c:25:32: warning:
- symbol 'bcm4908_partitions_quirks' was not declared. Should it be static?
-
-This symbol is not used outside of ofpart_core.c, so this
-commit marks it static.
-
-Fixes: 457da931b608 ("mtd: parsers: ofpart: support BCM4908 fixed partitions")
-Reported-by: Hulk Robot <hulkci@huawei.com>
-Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210304064600.3279138-1-weiyongjun1@huawei.com
----
- drivers/mtd/parsers/ofpart_core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -22,7 +22,7 @@ struct fixed_partitions_quirks {
- 	int (*post_parse)(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts);
- };
- 
--struct fixed_partitions_quirks bcm4908_partitions_quirks = {
-+static struct fixed_partitions_quirks bcm4908_partitions_quirks = {
- 	.post_parse = bcm4908_partitions_post_parse,
- };
- 
diff --git a/target/linux/generic/backport-5.4/406-v5.13-0001-mtd-core-add-nvmem-cells-compatible-to-parse-mtd-as-.patch b/target/linux/generic/backport-5.4/406-v5.13-0001-mtd-core-add-nvmem-cells-compatible-to-parse-mtd-as-.patch
deleted file mode 100644
index ecea743d87..0000000000
--- a/target/linux/generic/backport-5.4/406-v5.13-0001-mtd-core-add-nvmem-cells-compatible-to-parse-mtd-as-.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 658c4448bbbf02a143abf1b89d09a3337ebd3ba6 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 12 Mar 2021 07:28:19 +0100
-Subject: [PATCH] mtd: core: add nvmem-cells compatible to parse mtd as nvmem
- cells
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Partitions that contains the nvmem-cells compatible will register
-their direct subonodes as nvmem cells and the node will be treated as a
-nvmem provider.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Tested-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210312062830.20548-1-ansuelsmth@gmail.com
----
- drivers/mtd/mtdcore.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -559,6 +559,7 @@ static int mtd_nvmem_reg_read(void *priv
- 
- static int mtd_nvmem_add(struct mtd_info *mtd)
- {
-+	struct device_node *node = mtd_get_of_node(mtd);
- 	struct nvmem_config config = {};
- 
- 	config.id = -1;
-@@ -571,7 +572,7 @@ static int mtd_nvmem_add(struct mtd_info
- 	config.stride = 1;
- 	config.read_only = true;
- 	config.root_only = true;
--	config.no_of_node = true;
-+	config.no_of_node = !of_device_is_compatible(node, "nvmem-cells");
- 	config.priv = mtd;
- 
- 	mtd->nvmem = nvmem_register(&config);
diff --git a/target/linux/generic/backport-5.4/406-v5.13-0002-dt-bindings-nvmem-drop-nodename-restriction.patch b/target/linux/generic/backport-5.4/406-v5.13-0002-dt-bindings-nvmem-drop-nodename-restriction.patch
deleted file mode 100644
index c0515bd571..0000000000
--- a/target/linux/generic/backport-5.4/406-v5.13-0002-dt-bindings-nvmem-drop-nodename-restriction.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 52981a0fa9f7d68641e0e6bb584054c6d9eb2056 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 12 Mar 2021 07:28:20 +0100
-Subject: [PATCH] dt-bindings: nvmem: drop $nodename restriction
-
-Drop $nodename restriction as now mtd partition can also be used as
-nvmem provider.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210312062830.20548-2-ansuelsmth@gmail.com
----
- Documentation/devicetree/bindings/nvmem/nvmem.yaml | 3 ---
- 1 file changed, 3 deletions(-)
-
---- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
-+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
-@@ -20,9 +20,6 @@ description: |
-   storage device.
- 
- properties:
--  $nodename:
--    pattern: "^(eeprom|efuse|nvram)(@.*|-[0-9a-f])*$"
--
-   "#address-cells":
-     const: 1
- 
diff --git a/target/linux/generic/backport-5.4/406-v5.13-0003-dt-bindings-mtd-Document-use-of-nvmem-cells-compatib.patch b/target/linux/generic/backport-5.4/406-v5.13-0003-dt-bindings-mtd-Document-use-of-nvmem-cells-compatib.patch
deleted file mode 100644
index 552919f587..0000000000
--- a/target/linux/generic/backport-5.4/406-v5.13-0003-dt-bindings-mtd-Document-use-of-nvmem-cells-compatib.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From ac42c46f983e4a9003a7bb91ad44a23ab7b8f534 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 12 Mar 2021 07:28:21 +0100
-Subject: [PATCH] dt-bindings: mtd: Document use of nvmem-cells compatible
-
-Document nvmem-cells compatible used to treat mtd partitions as a
-nvmem provider.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210312062830.20548-3-ansuelsmth@gmail.com
----
- .../bindings/mtd/partitions/nvmem-cells.yaml  | 99 +++++++++++++++++++
- 1 file changed, 99 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml
-@@ -0,0 +1,99 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mtd/partitions/nvmem-cells.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Nvmem cells
-+
-+description: |
-+  Any partition containing the compatible "nvmem-cells" will register as a
-+  nvmem provider.
-+  Each direct subnodes represents a nvmem cell following the nvmem binding.
-+  Nvmem binding to declare nvmem-cells can be found in:
-+  Documentation/devicetree/bindings/nvmem/nvmem.yaml
-+
-+maintainers:
-+  - Ansuel Smith <ansuelsmth@gmail.com>
-+
-+allOf:
-+  - $ref: /schemas/nvmem/nvmem.yaml#
-+
-+properties:
-+  compatible:
-+    const: nvmem-cells
-+
-+required:
-+  - compatible
-+
-+additionalProperties: true
-+
-+examples:
-+  - |
-+    partitions {
-+      compatible = "fixed-partitions";
-+      #address-cells = <1>;
-+      #size-cells = <1>;
-+
-+      /* ... */
-+
-+      };
-+      art: art@1200000 {
-+        compatible = "nvmem-cells";
-+        reg = <0x1200000 0x0140000>;
-+        label = "art";
-+        read-only;
-+        #address-cells = <1>;
-+        #size-cells = <1>;
-+
-+        macaddr_gmac1: macaddr_gmac1@0 {
-+          reg = <0x0 0x6>;
-+        };
-+
-+        macaddr_gmac2: macaddr_gmac2@6 {
-+          reg = <0x6 0x6>;
-+        };
-+
-+        pre_cal_24g: pre_cal_24g@1000 {
-+          reg = <0x1000 0x2f20>;
-+        };
-+
-+        pre_cal_5g: pre_cal_5g@5000{
-+          reg = <0x5000 0x2f20>;
-+        };
-+      };
-+  - |
-+    partitions {
-+        compatible = "fixed-partitions";
-+        #address-cells = <1>;
-+        #size-cells = <1>;
-+
-+        partition@0 {
-+            label = "bootloader";
-+            reg = <0x000000 0x100000>;
-+            read-only;
-+        };
-+
-+        firmware@100000 {
-+            compatible = "brcm,trx";
-+            label = "firmware";
-+            reg = <0x100000 0xe00000>;
-+        };
-+
-+        calibration@f00000 {
-+            compatible = "nvmem-cells";
-+            label = "calibration";
-+            reg = <0xf00000 0x100000>;
-+            ranges = <0 0xf00000 0x100000>;
-+            #address-cells = <1>;
-+            #size-cells = <1>;
-+
-+            wifi0@0 {
-+                reg = <0x000000 0x080000>;
-+            };
-+
-+            wifi1@80000 {
-+                reg = <0x080000 0x080000>;
-+            };
-+        };
-+    };
diff --git a/target/linux/generic/backport-5.4/407-v5.13-0001-dt-bindings-mtd-add-binding-for-Linksys-Northstar-pa.patch b/target/linux/generic/backport-5.4/407-v5.13-0001-dt-bindings-mtd-add-binding-for-Linksys-Northstar-pa.patch
deleted file mode 100644
index 35a4afd67b..0000000000
--- a/target/linux/generic/backport-5.4/407-v5.13-0001-dt-bindings-mtd-add-binding-for-Linksys-Northstar-pa.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 2fa7294175c76e1ec568aa75c1891fd908728c8d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 12 Mar 2021 14:49:18 +0100
-Subject: [PATCH] dt-bindings: mtd: add binding for Linksys Northstar
- partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Linksys on Broadcom Northstar devices uses fixed flash layout with
-multiple firmware partitions.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210312134919.7767-1-zajec5@gmail.com
----
- .../mtd/partitions/linksys,ns-partitions.yaml | 74 +++++++++++++++++++
- 1 file changed, 74 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
-@@ -0,0 +1,74 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mtd/partitions/linksys,ns-partitions.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Linksys Northstar partitioning
-+
-+description: |
-+  Linksys devices based on Broadcom Northstar architecture often use two
-+  firmware partitions. One is used for regular booting, the other is treated as
-+  fallback.
-+
-+  This binding allows defining all fixed partitions and marking those containing
-+  firmware. System can use that information e.g. for booting or flashing
-+  purposes.
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  compatible:
-+    const: linksys,ns-partitions
-+
-+  "#address-cells":
-+    enum: [ 1, 2 ]
-+
-+  "#size-cells":
-+    enum: [ 1, 2 ]
-+
-+patternProperties:
-+  "^partition@[0-9a-f]+$":
-+    $ref: "partition.yaml#"
-+    properties:
-+      compatible:
-+        items:
-+          - const: linksys,ns-firmware
-+          - const: brcm,trx
-+    unevaluatedProperties: false
-+
-+required:
-+  - "#address-cells"
-+  - "#size-cells"
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    partitions {
-+        compatible = "linksys,ns-partitions";
-+        #address-cells = <1>;
-+        #size-cells = <1>;
-+
-+        partition@0 {
-+            label = "boot";
-+            reg = <0x0 0x100000>;
-+            read-only;
-+        };
-+
-+        partition@100000 {
-+            label = "nvram";
-+            reg = <0x100000 0x100000>;
-+        };
-+
-+        partition@200000 {
-+            compatible = "linksys,ns-firmware", "brcm,trx";
-+            reg = <0x200000 0xf00000>;
-+        };
-+
-+        partition@1100000 {
-+            compatible = "linksys,ns-firmware", "brcm,trx";
-+            reg = <0x1100000 0xf00000>;
-+        };
-+    };
diff --git a/target/linux/generic/backport-5.4/407-v5.13-0002-mtd-parsers-ofpart-support-Linksys-Northstar-partiti.patch b/target/linux/generic/backport-5.4/407-v5.13-0002-mtd-parsers-ofpart-support-Linksys-Northstar-partiti.patch
deleted file mode 100644
index 75eb9391ae..0000000000
--- a/target/linux/generic/backport-5.4/407-v5.13-0002-mtd-parsers-ofpart-support-Linksys-Northstar-partiti.patch
+++ /dev/null
@@ -1,156 +0,0 @@
-From 7134a2d026d942210b4d26d6059c9d979ca7866e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 12 Mar 2021 14:49:19 +0100
-Subject: [PATCH] mtd: parsers: ofpart: support Linksys Northstar partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows extending ofpart parser with support for Linksys Northstar
-devices. That support uses recently added quirks mechanism.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210312134919.7767-2-zajec5@gmail.com
----
- drivers/mtd/parsers/Kconfig             | 10 +++++
- drivers/mtd/parsers/Makefile            |  1 +
- drivers/mtd/parsers/ofpart_core.c       |  6 +++
- drivers/mtd/parsers/ofpart_linksys_ns.c | 50 +++++++++++++++++++++++++
- drivers/mtd/parsers/ofpart_linksys_ns.h | 18 +++++++++
- 5 files changed, 85 insertions(+)
- create mode 100644 drivers/mtd/parsers/ofpart_linksys_ns.c
- create mode 100644 drivers/mtd/parsers/ofpart_linksys_ns.h
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -76,6 +76,16 @@ config MTD_OF_PARTS_BCM4908
- 	  that can have multiple "firmware" partitions. It takes care of
- 	  finding currently used one and backup ones.
- 
-+config MTD_OF_PARTS_LINKSYS_NS
-+	bool "Linksys Northstar partitioning support"
-+	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST)
-+	default ARCH_BCM_5301X
-+	help
-+	  This provides partitions parser for Linksys devices based on Broadcom
-+	  Northstar architecture. Linksys commonly uses fixed flash layout with
-+	  two "firmware" partitions. Currently used firmware has to be detected
-+	  using CFE environment variable.
-+
- config MTD_PARSER_IMAGETAG
- 	tristate "Parser for BCM963XX Image Tag format partitions"
- 	depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -6,6 +6,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS)		+= cmdl
- obj-$(CONFIG_MTD_OF_PARTS)		+= ofpart.o
- ofpart-y				+= ofpart_core.o
- ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908)	+= ofpart_bcm4908.o
-+ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)+= ofpart_linksys_ns.o
- obj-$(CONFIG_MTD_PARSER_IMAGETAG)	+= parser_imagetag.o
- obj-$(CONFIG_MTD_AFS_PARTS)		+= afs.o
- obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -17,6 +17,7 @@
- #include <linux/mtd/partitions.h>
- 
- #include "ofpart_bcm4908.h"
-+#include "ofpart_linksys_ns.h"
- 
- struct fixed_partitions_quirks {
- 	int (*post_parse)(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts);
-@@ -26,6 +27,10 @@ static struct fixed_partitions_quirks bc
- 	.post_parse = bcm4908_partitions_post_parse,
- };
- 
-+static struct fixed_partitions_quirks linksys_ns_partitions_quirks = {
-+	.post_parse = linksys_ns_partitions_post_parse,
-+};
-+
- static const struct of_device_id parse_ofpart_match_table[];
- 
- static bool node_has_compatible(struct device_node *pp)
-@@ -164,6 +169,7 @@ static const struct of_device_id parse_o
- 	{ .compatible = "fixed-partitions" },
- 	/* Customized */
- 	{ .compatible = "brcm,bcm4908-partitions", .data = &bcm4908_partitions_quirks, },
-+	{ .compatible = "linksys,ns-partitions", .data = &linksys_ns_partitions_quirks, },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, parse_ofpart_match_table);
---- /dev/null
-+++ b/drivers/mtd/parsers/ofpart_linksys_ns.c
-@@ -0,0 +1,50 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/bcm47xx_nvram.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include "ofpart_linksys_ns.h"
-+
-+#define NVRAM_BOOT_PART		"bootpartition"
-+
-+static int ofpart_linksys_ns_bootpartition(void)
-+{
-+	char buf[4];
-+	int bootpartition;
-+
-+	/* Check CFE environment variable */
-+	if (bcm47xx_nvram_getenv(NVRAM_BOOT_PART, buf, sizeof(buf)) > 0) {
-+		if (!kstrtoint(buf, 0, &bootpartition))
-+			return bootpartition;
-+		pr_warn("Failed to parse %s value \"%s\"\n", NVRAM_BOOT_PART,
-+			buf);
-+	} else {
-+		pr_warn("Failed to get NVRAM \"%s\"\n", NVRAM_BOOT_PART);
-+	}
-+
-+	return 0;
-+}
-+
-+int linksys_ns_partitions_post_parse(struct mtd_info *mtd,
-+				     struct mtd_partition *parts,
-+				     int nr_parts)
-+{
-+	int bootpartition = ofpart_linksys_ns_bootpartition();
-+	int trx_idx = 0;
-+	int i;
-+
-+	for (i = 0; i < nr_parts; i++) {
-+		if (of_device_is_compatible(parts[i].of_node, "linksys,ns-firmware")) {
-+			if (trx_idx++ == bootpartition)
-+				parts[i].name = "firmware";
-+			else
-+				parts[i].name = "backup";
-+		}
-+	}
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/mtd/parsers/ofpart_linksys_ns.h
-@@ -0,0 +1,18 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+#ifndef __OFPART_LINKSYS_NS_H
-+#define __OFPART_LINKSYS_NS_H
-+
-+#ifdef CONFIG_MTD_OF_PARTS_LINKSYS_NS
-+int linksys_ns_partitions_post_parse(struct mtd_info *mtd,
-+				     struct mtd_partition *parts,
-+				     int nr_parts);
-+#else
-+static inline int linksys_ns_partitions_post_parse(struct mtd_info *mtd,
-+						   struct mtd_partition *parts,
-+						   int nr_parts)
-+{
-+	return -EOPNOTSUPP;
-+}
-+#endif
-+
-+#endif
diff --git a/target/linux/generic/backport-5.4/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch b/target/linux/generic/backport-5.4/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch
deleted file mode 100644
index 3af641e62e..0000000000
--- a/target/linux/generic/backport-5.4/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 7e4404113686868858a34210c28ae122e967aa64 Mon Sep 17 00:00:00 2001
-From: Mauri Sandberg <sandberg@mailfence.com>
-Date: Tue, 9 Mar 2021 19:48:59 +0200
-Subject: [PATCH] mtd: cfi_cmdset_0002: Disable buffered writes for AMD chip
- 0x2201
-
-Buffer writes do not work with AMD chip 0x2201. The chip in question
-is a AMD/Spansion/Cypress Semiconductor S29GL256N and datasheet [1]
-talks about writing buffers being possible. While waiting for a neater
-solution resort to writing word-sized chunks only.
-
-Without the patch kernel logs will be flooded with entries like below:
-
-jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
-jffs2_build_filesystem(): unlocking the mtd device...
-done.
-jffs2_build_filesystem(): erasing all blocks after the end marker...
-MTD do_write_buffer_wait(): software timeout, address:0x01ec000a.
-jffs2: Write clean marker to block at 0x01920000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01e2000a.
-jffs2: Write clean marker to block at 0x01880000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01e0000a.
-jffs2: Write clean marker to block at 0x01860000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01dc000a.
-jffs2: Write clean marker to block at 0x01820000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01da000a.
-jffs2: Write clean marker to block at 0x01800000 failed: -5
-...
-
-Tested on a Buffalo wzr-hp-g300nh running kernel 5.10.16.
-
-[1] https://www.cypress.com/file/219941/download
-or  https://datasheetspdf.com/pdf-file/565708/SPANSION/S29GL256N/1
-
-Signed-off-by: Mauri Sandberg <sandberg@mailfence.com>
-Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
-Link: https://lore.kernel.org/r/20210309174859.362060-1-sandberg@mailfence.com
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -272,6 +272,10 @@ static void fixup_use_write_buffers(stru
- {
- 	struct map_info *map = mtd->priv;
- 	struct cfi_private *cfi = map->fldrv_priv;
-+
-+	if (cfi->mfr == CFI_MFR_AMD && cfi->id == 0x2201)
-+		return;
-+
- 	if (cfi->cfiq->BufWriteTimeoutTyp) {
- 		pr_debug("Using buffer write method\n");
- 		mtd->_write = cfi_amdstd_write_buffers;
diff --git a/target/linux/generic/backport-5.4/410-mtd-fix-calculating-partition-end-address.patch b/target/linux/generic/backport-5.4/410-mtd-fix-calculating-partition-end-address.patch
deleted file mode 100644
index 1eae015b28..0000000000
--- a/target/linux/generic/backport-5.4/410-mtd-fix-calculating-partition-end-address.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 9 Mar 2020 08:30:19 +0100
-Subject: [PATCH] mtd: fix calculating partition end address
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes check for partitions that don't start at beginning of their
-parents. Missing partition's offset in formula could result in forcing
-read-only incorrectly.
-
-Fixes: 6750f61a13a0 ("mtd: improve calculating partition boundaries when checking for alignment")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/mtd/mtdpart.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -524,7 +524,7 @@ static struct mtd_part *allocate_partiti
- 			part->name);
- 	}
- 
--	tmp = part_absolute_offset(parent) + slave->mtd.size;
-+	tmp = part_absolute_offset(parent) + slave->offset + slave->mtd.size;
- 	remainder = do_div(tmp, wr_alignment);
- 	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
- 		slave->mtd.flags &= ~MTD_WRITEABLE;
diff --git a/target/linux/generic/backport-5.4/500-v5.13-ubifs-default-to-zstd-compression.patch b/target/linux/generic/backport-5.4/500-v5.13-ubifs-default-to-zstd-compression.patch
deleted file mode 100644
index dd50c19c27..0000000000
--- a/target/linux/generic/backport-5.4/500-v5.13-ubifs-default-to-zstd-compression.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From dcdf415b740923530dc71d89fecc8361078473f5 Mon Sep 17 00:00:00 2001
-From: Rui Salvaterra <rsalvaterra@gmail.com>
-Date: Mon, 5 Apr 2021 16:11:55 +0100
-Subject: [PATCH] ubifs: default to zstd compression
-
-Compared to lzo and zlib, zstd is the best all-around performer, both in terms
-of speed and compression ratio. Set it as the default, if available.
-
-Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
----
- fs/ubifs/sb.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/fs/ubifs/sb.c
-+++ b/fs/ubifs/sb.c
-@@ -53,6 +53,9 @@
- 
- static int get_default_compressor(struct ubifs_info *c)
- {
-+	if (ubifs_compr_present(c, UBIFS_COMPR_ZSTD))
-+		return UBIFS_COMPR_ZSTD;
-+
- 	if (ubifs_compr_present(c, UBIFS_COMPR_LZO))
- 		return UBIFS_COMPR_LZO;
- 
diff --git a/target/linux/generic/backport-5.4/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch b/target/linux/generic/backport-5.4/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch
deleted file mode 100644
index 35aeb96251..0000000000
--- a/target/linux/generic/backport-5.4/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 8 Feb 2021 11:34:08 -0800
-Subject: [PATCH] net: extract napi poll functionality to __napi_poll()
-
-This commit introduces a new function __napi_poll() which does the main
-logic of the existing napi_poll() function, and will be called by other
-functions in later commits.
-This idea and implementation is done by Felix Fietkau <nbd@nbd.name> and
-is proposed as part of the patch to move napi work to work_queue
-context.
-This commit by itself is a code restructure.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Wei Wang <weiwan@google.com>
-Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -6325,15 +6325,10 @@ void netif_napi_del(struct napi_struct *
- }
- EXPORT_SYMBOL(netif_napi_del);
- 
--static int napi_poll(struct napi_struct *n, struct list_head *repoll)
-+static int __napi_poll(struct napi_struct *n, bool *repoll)
- {
--	void *have;
- 	int work, weight;
- 
--	list_del_init(&n->poll_list);
--
--	have = netpoll_poll_lock(n);
--
- 	weight = n->weight;
- 
- 	/* This NAPI_STATE_SCHED test is for avoiding a race
-@@ -6351,7 +6346,7 @@ static int napi_poll(struct napi_struct
- 	WARN_ON_ONCE(work > weight);
- 
- 	if (likely(work < weight))
--		goto out_unlock;
-+		return work;
- 
- 	/* Drivers must not modify the NAPI state if they
- 	 * consume the entire weight.  In such cases this code
-@@ -6360,7 +6355,7 @@ static int napi_poll(struct napi_struct
- 	 */
- 	if (unlikely(napi_disable_pending(n))) {
- 		napi_complete(n);
--		goto out_unlock;
-+		return work;
- 	}
- 
- 	if (n->gro_bitmask) {
-@@ -6378,12 +6373,29 @@ static int napi_poll(struct napi_struct
- 	if (unlikely(!list_empty(&n->poll_list))) {
- 		pr_warn_once("%s: Budget exhausted after napi rescheduled\n",
- 			     n->dev ? n->dev->name : "backlog");
--		goto out_unlock;
-+		return work;
- 	}
- 
--	list_add_tail(&n->poll_list, repoll);
-+	*repoll = true;
-+
-+	return work;
-+}
-+
-+static int napi_poll(struct napi_struct *n, struct list_head *repoll)
-+{
-+	bool do_repoll = false;
-+	void *have;
-+	int work;
-+
-+	list_del_init(&n->poll_list);
-+
-+	have = netpoll_poll_lock(n);
-+
-+	work = __napi_poll(n, &do_repoll);
-+
-+	if (do_repoll)
-+		list_add_tail(&n->poll_list, repoll);
- 
--out_unlock:
- 	netpoll_poll_unlock(have);
- 
- 	return work;
diff --git a/target/linux/generic/backport-5.4/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch b/target/linux/generic/backport-5.4/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch
deleted file mode 100644
index 0c548f331a..0000000000
--- a/target/linux/generic/backport-5.4/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch
+++ /dev/null
@@ -1,261 +0,0 @@
-From: Wei Wang <weiwan@google.com>
-Date: Mon, 8 Feb 2021 11:34:09 -0800
-Subject: [PATCH] net: implement threaded-able napi poll loop support
-
-This patch allows running each napi poll loop inside its own
-kernel thread.
-The kthread is created during netif_napi_add() if dev->threaded
-is set. And threaded mode is enabled in napi_enable(). We will
-provide a way to set dev->threaded and enable threaded mode
-without a device up/down in the following patch.
-
-Once that threaded mode is enabled and the kthread is
-started, napi_schedule() will wake-up such thread instead
-of scheduling the softirq.
-
-The threaded poll loop behaves quite likely the net_rx_action,
-but it does not have to manipulate local irqs and uses
-an explicit scheduling point based on netdev_budget.
-
-Co-developed-by: Paolo Abeni <pabeni@redhat.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-Co-developed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
-Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
-Co-developed-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Wei Wang <weiwan@google.com>
-Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -340,6 +340,7 @@ struct napi_struct {
- 	struct list_head	dev_list;
- 	struct hlist_node	napi_hash_node;
- 	unsigned int		napi_id;
-+	struct task_struct	*thread;
- };
- 
- enum {
-@@ -350,6 +351,7 @@ enum {
- 	NAPI_STATE_HASHED,	/* In NAPI hash (busy polling possible) */
- 	NAPI_STATE_NO_BUSY_POLL,/* Do not add in napi_hash, no busy polling */
- 	NAPI_STATE_IN_BUSY_POLL,/* sk_busy_loop() owns this NAPI */
-+	NAPI_STATE_THREADED,		/* The poll is performed inside its own thread*/
- };
- 
- enum {
-@@ -360,6 +362,7 @@ enum {
- 	NAPIF_STATE_HASHED	 = BIT(NAPI_STATE_HASHED),
- 	NAPIF_STATE_NO_BUSY_POLL = BIT(NAPI_STATE_NO_BUSY_POLL),
- 	NAPIF_STATE_IN_BUSY_POLL = BIT(NAPI_STATE_IN_BUSY_POLL),
-+	NAPIF_STATE_THREADED	 = BIT(NAPI_STATE_THREADED),
- };
- 
- enum gro_result {
-@@ -504,20 +507,7 @@ bool napi_hash_del(struct napi_struct *n
-  */
- void napi_disable(struct napi_struct *n);
- 
--/**
-- *	napi_enable - enable NAPI scheduling
-- *	@n: NAPI context
-- *
-- * Resume NAPI from being scheduled on this context.
-- * Must be paired with napi_disable.
-- */
--static inline void napi_enable(struct napi_struct *n)
--{
--	BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
--	smp_mb__before_atomic();
--	clear_bit(NAPI_STATE_SCHED, &n->state);
--	clear_bit(NAPI_STATE_NPSVC, &n->state);
--}
-+void napi_enable(struct napi_struct *n);
- 
- /**
-  *	napi_synchronize - wait until NAPI is not running
-@@ -1783,6 +1773,8 @@ enum netdev_ml_priv_type {
-  *
-  *	@wol_enabled:	Wake-on-LAN is enabled
-  *
-+ *	@threaded:	napi threaded mode is enabled
-+ *
-  *	FIXME: cleanup struct net_device such that network protocol info
-  *	moves out.
-  */
-@@ -2075,6 +2067,7 @@ struct net_device {
- 	struct lock_class_key	addr_list_lock_key;
- 	bool			proto_down;
- 	unsigned		wol_enabled:1;
-+	unsigned		threaded:1;
- };
- #define to_net_dev(d) container_of(d, struct net_device, dev)
- 
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -91,6 +91,7 @@
- #include <linux/etherdevice.h>
- #include <linux/ethtool.h>
- #include <linux/skbuff.h>
-+#include <linux/kthread.h>
- #include <linux/bpf.h>
- #include <linux/bpf_trace.h>
- #include <net/net_namespace.h>
-@@ -1289,6 +1290,27 @@ void netdev_notify_peers(struct net_devi
- }
- EXPORT_SYMBOL(netdev_notify_peers);
- 
-+static int napi_threaded_poll(void *data);
-+
-+static int napi_kthread_create(struct napi_struct *n)
-+{
-+	int err = 0;
-+
-+	/* Create and wake up the kthread once to put it in
-+	 * TASK_INTERRUPTIBLE mode to avoid the blocked task
-+	 * warning and work with loadavg.
-+	 */
-+	n->thread = kthread_run(napi_threaded_poll, n, "napi/%s-%d",
-+				n->dev->name, n->napi_id);
-+	if (IS_ERR(n->thread)) {
-+		err = PTR_ERR(n->thread);
-+		pr_err("kthread_run failed with err %d\n", err);
-+		n->thread = NULL;
-+	}
-+
-+	return err;
-+}
-+
- static int __dev_open(struct net_device *dev, struct netlink_ext_ack *extack)
- {
- 	const struct net_device_ops *ops = dev->netdev_ops;
-@@ -3888,6 +3910,21 @@ int gro_normal_batch __read_mostly = 8;
- static inline void ____napi_schedule(struct softnet_data *sd,
- 				     struct napi_struct *napi)
- {
-+	struct task_struct *thread;
-+
-+	if (test_bit(NAPI_STATE_THREADED, &napi->state)) {
-+		/* Paired with smp_mb__before_atomic() in
-+		 * napi_enable(). Use READ_ONCE() to guarantee
-+		 * a complete read on napi->thread. Only call
-+		 * wake_up_process() when it's not NULL.
-+		 */
-+		thread = READ_ONCE(napi->thread);
-+		if (thread) {
-+			wake_up_process(thread);
-+			return;
-+		}
-+	}
-+
- 	list_add_tail(&napi->poll_list, &sd->poll_list);
- 	__raise_softirq_irqoff(NET_RX_SOFTIRQ);
- }
-@@ -6279,6 +6316,12 @@ void netif_napi_add(struct net_device *d
- 	set_bit(NAPI_STATE_NPSVC, &napi->state);
- 	list_add_rcu(&napi->dev_list, &dev->napi_list);
- 	napi_hash_add(napi);
-+	/* Create kthread for this napi if dev->threaded is set.
-+	 * Clear dev->threaded if kthread creation failed so that
-+	 * threaded mode will not be enabled in napi_enable().
-+	 */
-+	if (dev->threaded && napi_kthread_create(napi))
-+		dev->threaded = 0;
- }
- EXPORT_SYMBOL(netif_napi_add);
- 
-@@ -6295,9 +6338,28 @@ void napi_disable(struct napi_struct *n)
- 	hrtimer_cancel(&n->timer);
- 
- 	clear_bit(NAPI_STATE_DISABLE, &n->state);
-+	clear_bit(NAPI_STATE_THREADED, &n->state);
- }
- EXPORT_SYMBOL(napi_disable);
- 
-+/**
-+ *	napi_enable - enable NAPI scheduling
-+ *	@n: NAPI context
-+ *
-+ * Resume NAPI from being scheduled on this context.
-+ * Must be paired with napi_disable.
-+ */
-+void napi_enable(struct napi_struct *n)
-+{
-+	BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
-+	smp_mb__before_atomic();
-+	clear_bit(NAPI_STATE_SCHED, &n->state);
-+	clear_bit(NAPI_STATE_NPSVC, &n->state);
-+	if (n->dev->threaded && n->thread)
-+		set_bit(NAPI_STATE_THREADED, &n->state);
-+}
-+EXPORT_SYMBOL(napi_enable);
-+
- static void flush_gro_hash(struct napi_struct *napi)
- {
- 	int i;
-@@ -6322,6 +6384,11 @@ void netif_napi_del(struct napi_struct *
- 
- 	flush_gro_hash(napi);
- 	napi->gro_bitmask = 0;
-+
-+	if (napi->thread) {
-+		kthread_stop(napi->thread);
-+		napi->thread = NULL;
-+	}
- }
- EXPORT_SYMBOL(netif_napi_del);
- 
-@@ -6401,6 +6468,51 @@ static int napi_poll(struct napi_struct
- 	return work;
- }
- 
-+static int napi_thread_wait(struct napi_struct *napi)
-+{
-+	set_current_state(TASK_INTERRUPTIBLE);
-+
-+	while (!kthread_should_stop() && !napi_disable_pending(napi)) {
-+		if (test_bit(NAPI_STATE_SCHED, &napi->state)) {
-+			WARN_ON(!list_empty(&napi->poll_list));
-+			__set_current_state(TASK_RUNNING);
-+			return 0;
-+		}
-+
-+		schedule();
-+		set_current_state(TASK_INTERRUPTIBLE);
-+	}
-+	__set_current_state(TASK_RUNNING);
-+	return -1;
-+}
-+
-+static int napi_threaded_poll(void *data)
-+{
-+	struct napi_struct *napi = data;
-+	void *have;
-+
-+	while (!napi_thread_wait(napi)) {
-+		for (;;) {
-+			bool repoll = false;
-+
-+			local_bh_disable();
-+
-+			have = netpoll_poll_lock(napi);
-+			__napi_poll(napi, &repoll);
-+			netpoll_poll_unlock(have);
-+
-+			__kfree_skb_flush();
-+			local_bh_enable();
-+
-+			if (!repoll)
-+				break;
-+
-+			cond_resched();
-+		}
-+	}
-+	return 0;
-+}
-+
- static __latent_entropy void net_rx_action(struct softirq_action *h)
- {
- 	struct softnet_data *sd = this_cpu_ptr(&softnet_data);
diff --git a/target/linux/generic/backport-5.4/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch b/target/linux/generic/backport-5.4/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch
deleted file mode 100644
index bdc34a15ea..0000000000
--- a/target/linux/generic/backport-5.4/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch
+++ /dev/null
@@ -1,177 +0,0 @@
-From: Wei Wang <weiwan@google.com>
-Date: Mon, 8 Feb 2021 11:34:10 -0800
-Subject: [PATCH] net: add sysfs attribute to control napi threaded mode
-
-This patch adds a new sysfs attribute to the network device class.
-Said attribute provides a per-device control to enable/disable the
-threaded mode for all the napi instances of the given network device,
-without the need for a device up/down.
-User sets it to 1 or 0 to enable or disable threaded mode.
-Note: when switching between threaded and the current softirq based mode
-for a napi instance, it will not immediately take effect if the napi is
-currently being polled. The mode switch will happen for the next time
-napi_schedule() is called.
-
-Co-developed-by: Paolo Abeni <pabeni@redhat.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-Co-developed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
-Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
-Co-developed-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Wei Wang <weiwan@google.com>
-Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/Documentation/ABI/testing/sysfs-class-net
-+++ b/Documentation/ABI/testing/sysfs-class-net
-@@ -301,3 +301,18 @@ Contact:	netdev@vger.kernel.org
- Description:
- 		32-bit unsigned integer counting the number of times the link has
- 		been down
-+
-+What:		/sys/class/net/<iface>/threaded
-+Date:		Jan 2021
-+KernelVersion:	5.12
-+Contact:	netdev@vger.kernel.org
-+Description:
-+		Boolean value to control the threaded mode per device. User could
-+		set this value to enable/disable threaded mode for all napi
-+		belonging to this device, without the need to do device up/down.
-+
-+		Possible values:
-+		== ==================================
-+		0  threaded mode disabled for this dev
-+		1  threaded mode enabled for this dev
-+		== ==================================
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -498,6 +498,8 @@ static inline bool napi_complete(struct
-  */
- bool napi_hash_del(struct napi_struct *napi);
- 
-+int dev_set_threaded(struct net_device *dev, bool threaded);
-+
- /**
-  *	napi_disable - prevent NAPI from scheduling
-  *	@n: NAPI context
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -3914,8 +3914,9 @@ static inline void ____napi_schedule(str
- 
- 	if (test_bit(NAPI_STATE_THREADED, &napi->state)) {
- 		/* Paired with smp_mb__before_atomic() in
--		 * napi_enable(). Use READ_ONCE() to guarantee
--		 * a complete read on napi->thread. Only call
-+		 * napi_enable()/dev_set_threaded().
-+		 * Use READ_ONCE() to guarantee a complete
-+		 * read on napi->thread. Only call
- 		 * wake_up_process() when it's not NULL.
- 		 */
- 		thread = READ_ONCE(napi->thread);
-@@ -6293,6 +6294,49 @@ static void init_gro_hash(struct napi_st
- 	napi->gro_bitmask = 0;
- }
- 
-+int dev_set_threaded(struct net_device *dev, bool threaded)
-+{
-+	struct napi_struct *napi;
-+	int err = 0;
-+
-+	if (dev->threaded == threaded)
-+		return 0;
-+
-+	if (threaded) {
-+		list_for_each_entry(napi, &dev->napi_list, dev_list) {
-+			if (!napi->thread) {
-+				err = napi_kthread_create(napi);
-+				if (err) {
-+					threaded = false;
-+					break;
-+				}
-+			}
-+		}
-+	}
-+
-+	dev->threaded = threaded;
-+
-+	/* Make sure kthread is created before THREADED bit
-+	 * is set.
-+	 */
-+	smp_mb__before_atomic();
-+
-+	/* Setting/unsetting threaded mode on a napi might not immediately
-+	 * take effect, if the current napi instance is actively being
-+	 * polled. In this case, the switch between threaded mode and
-+	 * softirq mode will happen in the next round of napi_schedule().
-+	 * This should not cause hiccups/stalls to the live traffic.
-+	 */
-+	list_for_each_entry(napi, &dev->napi_list, dev_list) {
-+		if (threaded)
-+			set_bit(NAPI_STATE_THREADED, &napi->state);
-+		else
-+			clear_bit(NAPI_STATE_THREADED, &napi->state);
-+	}
-+
-+	return err;
-+}
-+
- void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
- 		    int (*poll)(struct napi_struct *, int), int weight)
- {
---- a/net/core/net-sysfs.c
-+++ b/net/core/net-sysfs.c
-@@ -557,6 +557,45 @@ static ssize_t phys_switch_id_show(struc
- }
- static DEVICE_ATTR_RO(phys_switch_id);
- 
-+static ssize_t threaded_show(struct device *dev,
-+			     struct device_attribute *attr, char *buf)
-+{
-+	struct net_device *netdev = to_net_dev(dev);
-+	ssize_t ret = -EINVAL;
-+
-+	if (!rtnl_trylock())
-+		return restart_syscall();
-+
-+	if (dev_isalive(netdev))
-+		ret = sprintf(buf, fmt_dec, netdev->threaded);
-+
-+	rtnl_unlock();
-+	return ret;
-+}
-+
-+static int modify_napi_threaded(struct net_device *dev, unsigned long val)
-+{
-+	int ret;
-+
-+	if (list_empty(&dev->napi_list))
-+		return -EOPNOTSUPP;
-+
-+	if (val != 0 && val != 1)
-+		return -EOPNOTSUPP;
-+
-+	ret = dev_set_threaded(dev, val);
-+
-+	return ret;
-+}
-+
-+static ssize_t threaded_store(struct device *dev,
-+			      struct device_attribute *attr,
-+			      const char *buf, size_t len)
-+{
-+	return netdev_store(dev, attr, buf, len, modify_napi_threaded);
-+}
-+static DEVICE_ATTR_RW(threaded);
-+
- static struct attribute *net_class_attrs[] __ro_after_init = {
- 	&dev_attr_netdev_group.attr,
- 	&dev_attr_type.attr,
-@@ -587,6 +626,7 @@ static struct attribute *net_class_attrs
- 	&dev_attr_proto_down.attr,
- 	&dev_attr_carrier_up_count.attr,
- 	&dev_attr_carrier_down_count.attr,
-+	&dev_attr_threaded.attr,
- 	NULL,
- };
- ATTRIBUTE_GROUPS(net_class);
diff --git a/target/linux/generic/backport-5.4/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch b/target/linux/generic/backport-5.4/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch
deleted file mode 100644
index 764f33e3fc..0000000000
--- a/target/linux/generic/backport-5.4/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From: Wei Wang <weiwan@google.com>
-Date: Mon, 1 Mar 2021 17:21:13 -0800
-Subject: [PATCH] net: fix race between napi kthread mode and busy poll
-
-Currently, napi_thread_wait() checks for NAPI_STATE_SCHED bit to
-determine if the kthread owns this napi and could call napi->poll() on
-it. However, if socket busy poll is enabled, it is possible that the
-busy poll thread grabs this SCHED bit (after the previous napi->poll()
-invokes napi_complete_done() and clears SCHED bit) and tries to poll
-on the same napi. napi_disable() could grab the SCHED bit as well.
-This patch tries to fix this race by adding a new bit
-NAPI_STATE_SCHED_THREADED in napi->state. This bit gets set in
-____napi_schedule() if the threaded mode is enabled, and gets cleared
-in napi_complete_done(), and we only poll the napi in kthread if this
-bit is set. This helps distinguish the ownership of the napi between
-kthread and other scenarios and fixes the race issue.
-
-Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support")
-Reported-by: Martin Zaharinov <micron10@gmail.com>
-Suggested-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Wei Wang <weiwan@google.com>
-Cc: Alexander Duyck <alexanderduyck@fb.com>
-Cc: Eric Dumazet <edumazet@google.com>
-Cc: Paolo Abeni <pabeni@redhat.com>
-Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -352,6 +352,7 @@ enum {
- 	NAPI_STATE_NO_BUSY_POLL,/* Do not add in napi_hash, no busy polling */
- 	NAPI_STATE_IN_BUSY_POLL,/* sk_busy_loop() owns this NAPI */
- 	NAPI_STATE_THREADED,		/* The poll is performed inside its own thread*/
-+	NAPI_STATE_SCHED_THREADED,	/* Napi is currently scheduled in threaded mode */
- };
- 
- enum {
-@@ -363,6 +364,7 @@ enum {
- 	NAPIF_STATE_NO_BUSY_POLL = BIT(NAPI_STATE_NO_BUSY_POLL),
- 	NAPIF_STATE_IN_BUSY_POLL = BIT(NAPI_STATE_IN_BUSY_POLL),
- 	NAPIF_STATE_THREADED	 = BIT(NAPI_STATE_THREADED),
-+	NAPIF_STATE_SCHED_THREADED	= BIT(NAPI_STATE_SCHED_THREADED),
- };
- 
- enum gro_result {
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -3921,6 +3921,8 @@ static inline void ____napi_schedule(str
- 		 */
- 		thread = READ_ONCE(napi->thread);
- 		if (thread) {
-+			if (thread->state != TASK_INTERRUPTIBLE)
-+				set_bit(NAPI_STATE_SCHED_THREADED, &napi->state);
- 			wake_up_process(thread);
- 			return;
- 		}
-@@ -6081,7 +6083,8 @@ bool napi_complete_done(struct napi_stru
- 
- 		WARN_ON_ONCE(!(val & NAPIF_STATE_SCHED));
- 
--		new = val & ~(NAPIF_STATE_MISSED | NAPIF_STATE_SCHED);
-+		new = val & ~(NAPIF_STATE_MISSED | NAPIF_STATE_SCHED |
-+			      NAPIF_STATE_SCHED_THREADED);
- 
- 		/* If STATE_MISSED was set, leave STATE_SCHED set,
- 		 * because we will call napi->poll() one more time.
-@@ -6514,16 +6517,25 @@ static int napi_poll(struct napi_struct
- 
- static int napi_thread_wait(struct napi_struct *napi)
- {
-+	bool woken = false;
-+
- 	set_current_state(TASK_INTERRUPTIBLE);
- 
- 	while (!kthread_should_stop() && !napi_disable_pending(napi)) {
--		if (test_bit(NAPI_STATE_SCHED, &napi->state)) {
-+		/* Testing SCHED_THREADED bit here to make sure the current
-+		 * kthread owns this napi and could poll on this napi.
-+		 * Testing SCHED bit is not enough because SCHED bit might be
-+		 * set by some other busy poll thread or by napi_disable().
-+		 */
-+		if (test_bit(NAPI_STATE_SCHED_THREADED, &napi->state) || woken) {
- 			WARN_ON(!list_empty(&napi->poll_list));
- 			__set_current_state(TASK_RUNNING);
- 			return 0;
- 		}
- 
- 		schedule();
-+		/* woken being true indicates this thread owns this napi. */
-+		woken = true;
- 		set_current_state(TASK_INTERRUPTIBLE);
- 	}
- 	__set_current_state(TASK_RUNNING);
diff --git a/target/linux/generic/backport-5.4/604-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch b/target/linux/generic/backport-5.4/604-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch
deleted file mode 100644
index 5c48fdf5c1..0000000000
--- a/target/linux/generic/backport-5.4/604-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From: Paolo Abeni <pabeni@redhat.com>
-Date: Fri, 9 Apr 2021 17:24:17 +0200
-Subject: [PATCH] net: fix hangup on napi_disable for threaded napi
-
-napi_disable() is subject to an hangup, when the threaded
-mode is enabled and the napi is under heavy traffic.
-
-If the relevant napi has been scheduled and the napi_disable()
-kicks in before the next napi_threaded_wait() completes - so
-that the latter quits due to the napi_disable_pending() condition,
-the existing code leaves the NAPI_STATE_SCHED bit set and the
-napi_disable() loop waiting for such bit will hang.
-
-This patch addresses the issue by dropping the NAPI_STATE_DISABLE
-bit test in napi_thread_wait(). The later napi_threaded_poll()
-iteration will take care of clearing the NAPI_STATE_SCHED.
-
-This also addresses a related problem reported by Jakub:
-before this patch a napi_disable()/napi_enable() pair killed
-the napi thread, effectively disabling the threaded mode.
-On the patched kernel napi_disable() simply stops scheduling
-the relevant thread.
-
-v1 -> v2:
-  - let the main napi_thread_poll() loop clear the SCHED bit
-
-Reported-by: Jakub Kicinski <kuba@kernel.org>
-Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support")
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-Reviewed-by: Eric Dumazet <edumazet@google.com>
-Link: https://lore.kernel.org/r/883923fa22745a9589e8610962b7dc59df09fb1f.1617981844.git.pabeni@redhat.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
-
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -6521,7 +6521,7 @@ static int napi_thread_wait(struct napi_
- 
- 	set_current_state(TASK_INTERRUPTIBLE);
- 
--	while (!kthread_should_stop() && !napi_disable_pending(napi)) {
-+	while (!kthread_should_stop()) {
- 		/* Testing SCHED_THREADED bit here to make sure the current
- 		 * kthread owns this napi and could poll on this napi.
- 		 * Testing SCHED bit is not enough because SCHED bit might be
-@@ -6539,6 +6539,7 @@ static int napi_thread_wait(struct napi_
- 		set_current_state(TASK_INTERRUPTIBLE);
- 	}
- 	__set_current_state(TASK_RUNNING);
-+
- 	return -1;
- }
- 
diff --git a/target/linux/generic/backport-5.4/610-v5.9-net-bridge-clear-bridge-s-private-skb-space-on-xmit.patch b/target/linux/generic/backport-5.4/610-v5.9-net-bridge-clear-bridge-s-private-skb-space-on-xmit.patch
deleted file mode 100644
index f1862943f8..0000000000
--- a/target/linux/generic/backport-5.4/610-v5.9-net-bridge-clear-bridge-s-private-skb-space-on-xmit.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
-Date: Fri, 31 Jul 2020 19:26:16 +0300
-Subject: [PATCH] net: bridge: clear bridge's private skb space on xmit
-
-We need to clear all of the bridge private skb variables as they can be
-stale due to the packet being recirculated through the stack and then
-transmitted through the bridge device. Similar memset is already done on
-bridge's input. We've seen cases where proxyarp_replied was 1 on routed
-multicast packets transmitted through the bridge to ports with neigh
-suppress which were getting dropped. Same thing can in theory happen with
-the port isolation bit as well.
-
-Fixes: 821f1b21cabb ("bridge: add new BR_NEIGH_SUPPRESS port flag to suppress arp and nd flood")
-Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/bridge/br_device.c
-+++ b/net/bridge/br_device.c
-@@ -36,6 +36,8 @@ netdev_tx_t br_dev_xmit(struct sk_buff *
- 	struct ethhdr *eth;
- 	u16 vid = 0;
- 
-+	memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
-+
- 	rcu_read_lock();
- 	nf_ops = rcu_dereference(nf_br_ops);
- 	if (nf_ops && nf_ops->br_dev_xmit_hook(skb)) {
diff --git a/target/linux/generic/backport-5.4/700-v5.5-net-core-allow-fast-GRO-for-skbs-with-Ethernet-heade.patch b/target/linux/generic/backport-5.4/700-v5.5-net-core-allow-fast-GRO-for-skbs-with-Ethernet-heade.patch
deleted file mode 100644
index 24b76cdca4..0000000000
--- a/target/linux/generic/backport-5.4/700-v5.5-net-core-allow-fast-GRO-for-skbs-with-Ethernet-heade.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From: Alexander Lobakin <alobakin@dlink.ru>
-Date: Fri, 15 Nov 2019 12:11:35 +0300
-Subject: [PATCH] net: core: allow fast GRO for skbs with Ethernet header in
- head
-
-Commit 78d3fd0b7de8 ("gro: Only use skb_gro_header for completely
-non-linear packets") back in May'09 (v2.6.31-rc1) has changed the
-original condition '!skb_headlen(skb)' to
-'skb->mac_header == skb->tail' in gro_reset_offset() saying: "Since
-the drivers that need this optimisation all provide completely
-non-linear packets" (note that this condition has become the current
-'skb_mac_header(skb) == skb_tail_pointer(skb)' later with commmit
-ced14f6804a9 ("net: Correct comparisons and calculations using
-skb->tail and skb-transport_header") without any functional changes).
-
-For now, we have the following rough statistics for v5.4-rc7:
-1) napi_gro_frags: 14
-2) napi_gro_receive with skb->head containing (most of) payload: 83
-3) napi_gro_receive with skb->head containing all the headers: 20
-4) napi_gro_receive with skb->head containing only Ethernet header: 2
-
-With the current condition, fast GRO with the usage of
-NAPI_GRO_CB(skb)->frag0 is available only in the [1] case.
-Packets pushed by [2] and [3] go through the 'slow' path, but
-it's not a problem for them as they already contain all the needed
-headers in skb->head, so pskb_may_pull() only moves skb->data.
-
-The layout of skbs in the fourth [4] case at the moment of
-dev_gro_receive() is identical to skbs that have come through [1],
-as napi_frags_skb() pulls Ethernet header to skb->head. The only
-difference is that the mentioned condition is always false for them,
-because skb_put() and friends irreversibly alter the tail pointer.
-They also go through the 'slow' path, but now every single
-pskb_may_pull() in every single .gro_receive() will call the *really*
-slow __pskb_pull_tail() to pull headers to head. This significantly
-decreases the overall performance for no visible reasons.
-
-The only two users of method [4] is:
-* drivers/staging/qlge
-* drivers/net/wireless/iwlwifi (all three variants: dvm, mvm, mvm-mq)
-
-Note that in case with wireless drivers we can't use [1]
-(napi_gro_frags()) at least for now and mac80211 stack always
-performs pushes and pulls anyways, so performance hit is inavoidable.
-
-At the moment of v2.6.31 the mentioned change was necessary (that's
-why I don't add the "Fixes:" tag), but it became obsolete since
-skb_gro_mac_header() has gone in commit a50e233c50db ("net-gro:
-restore frag0 optimization"), so we can simply revert the condition
-in gro_reset_offset() to allow skbs from [4] go through the 'fast'
-path just like in case [1].
-
-This was tested on a 600 MHz MIPS CPU and a custom driver and this
-patch gave boosts up to 40 Mbps to method [4] in both directions
-comparing to net-next, which made overall performance relatively
-close to [1] (without it, [4] is the slowest).
-
-v2:
-- Add more references and explanations to commit message
-- Fix some typos ibid
-- No functional changes
-
-Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -5475,8 +5475,7 @@ static inline void skb_gro_reset_offset(
- 	NAPI_GRO_CB(skb)->frag0 = NULL;
- 	NAPI_GRO_CB(skb)->frag0_len = 0;
- 
--	if (skb_mac_header(skb) == skb_tail_pointer(skb) &&
--	    pinfo->nr_frags &&
-+	if (!skb_headlen(skb) && pinfo->nr_frags &&
- 	    !PageHighMem(skb_frag_page(frag0)) &&
- 	    (!NET_IP_ALIGN || !((skb_frag_off(frag0) + nhoff) & 3))) {
- 		NAPI_GRO_CB(skb)->frag0 = skb_frag_address(frag0);
diff --git a/target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch b/target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
deleted file mode 100644
index 92fe224873..0000000000
--- a/target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
+++ /dev/null
@@ -1,179 +0,0 @@
-From 4054955f0da08c81d42220cb445820d474f1ac92 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 14 Sep 2019 14:21:22 +0100
-Subject: [PATCH 614/660] net: sfp: move fwnode parsing into sfp-bus layer
-
-Rather than parsing the sfp firmware node in phylink, parse it in the
-sfp-bus code, so we can re-use this code for PHYs without having to
-duplicate the parsing.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 21 ++++---------
- drivers/net/phy/sfp-bus.c | 65 +++++++++++++++++++++++++--------------
- include/linux/sfp.h       | 10 +++---
- 3 files changed, 53 insertions(+), 43 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -565,26 +565,17 @@ static const struct sfp_upstream_ops sfp
- static int phylink_register_sfp(struct phylink *pl,
- 				struct fwnode_handle *fwnode)
- {
--	struct fwnode_reference_args ref;
-+	struct sfp_bus *bus;
- 	int ret;
- 
--	if (!fwnode)
--		return 0;
--
--	ret = fwnode_property_get_reference_args(fwnode, "sfp", NULL,
--						 0, 0, &ref);
--	if (ret < 0) {
--		if (ret == -ENOENT)
--			return 0;
--
--		phylink_err(pl, "unable to parse \"sfp\" node: %d\n",
--			    ret);
-+	bus = sfp_register_upstream_node(fwnode, pl, &sfp_phylink_ops);
-+	if (IS_ERR(bus)) {
-+		ret = PTR_ERR(bus);
-+		phylink_err(pl, "unable to attach SFP bus: %d\n", ret);
- 		return ret;
- 	}
- 
--	pl->sfp_bus = sfp_register_upstream(ref.fwnode, pl, &sfp_phylink_ops);
--	if (!pl->sfp_bus)
--		return -ENOMEM;
-+	pl->sfp_bus = bus;
- 
- 	return 0;
- }
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -4,6 +4,7 @@
- #include <linux/list.h>
- #include <linux/mutex.h>
- #include <linux/phylink.h>
-+#include <linux/property.h>
- #include <linux/rtnetlink.h>
- #include <linux/slab.h>
- 
-@@ -520,45 +521,63 @@ static void sfp_upstream_clear(struct sf
- }
- 
- /**
-- * sfp_register_upstream() - Register the neighbouring device
-- * @fwnode: firmware node for the SFP bus
-+ * sfp_register_upstream_node() - parse and register the neighbouring device
-+ * @fwnode: firmware node for the parent device (MAC or PHY)
-  * @upstream: the upstream private data
-  * @ops: the upstream's &struct sfp_upstream_ops
-  *
-- * Register the upstream device (eg, PHY) with the SFP bus. MAC drivers
-- * should use phylink, which will call this function for them. Returns
-- * a pointer to the allocated &struct sfp_bus.
-+ * Parse the parent device's firmware node for a SFP bus, and register the
-+ * SFP bus using sfp_register_upstream().
-  *
-- * On error, returns %NULL.
-+ * Returns: on success, a pointer to the sfp_bus structure,
-+ *	    %NULL if no SFP is specified,
-+ * 	    on failure, an error pointer value:
-+ * 		corresponding to the errors detailed for
-+ * 		fwnode_property_get_reference_args().
-+ * 	        %-ENOMEM if we failed to allocate the bus.
-+ *		an error from the upstream's connect_phy() method.
-  */
--struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode,
--				      void *upstream,
--				      const struct sfp_upstream_ops *ops)
--{
--	struct sfp_bus *bus = sfp_bus_get(fwnode);
--	int ret = 0;
--
--	if (bus) {
--		rtnl_lock();
--		bus->upstream_ops = ops;
--		bus->upstream = upstream;
-+struct sfp_bus *sfp_register_upstream_node(struct fwnode_handle *fwnode,
-+					   void *upstream,
-+					   const struct sfp_upstream_ops *ops)
-+{
-+	struct fwnode_reference_args ref;
-+	struct sfp_bus *bus;
-+	int ret;
- 
--		if (bus->sfp) {
--			ret = sfp_register_bus(bus);
--			if (ret)
--				sfp_upstream_clear(bus);
--		}
--		rtnl_unlock();
-+	ret = fwnode_property_get_reference_args(fwnode, "sfp", NULL,
-+						 0, 0, &ref);
-+	if (ret == -ENOENT)
-+		return NULL;
-+	else if (ret < 0)
-+		return ERR_PTR(ret);
-+
-+	bus = sfp_bus_get(ref.fwnode);
-+	fwnode_handle_put(ref.fwnode);
-+	if (!bus)
-+		return ERR_PTR(-ENOMEM);
-+
-+	rtnl_lock();
-+	bus->upstream_ops = ops;
-+	bus->upstream = upstream;
-+
-+	if (bus->sfp) {
-+		ret = sfp_register_bus(bus);
-+		if (ret)
-+			sfp_upstream_clear(bus);
-+	} else {
-+		ret = 0;
- 	}
-+	rtnl_unlock();
- 
- 	if (ret) {
- 		sfp_bus_put(bus);
--		bus = NULL;
-+		bus = ERR_PTR(ret);
- 	}
- 
- 	return bus;
- }
--EXPORT_SYMBOL_GPL(sfp_register_upstream);
-+EXPORT_SYMBOL_GPL(sfp_register_upstream_node);
- 
- /**
-  * sfp_unregister_upstream() - Unregister sfp bus
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -508,9 +508,9 @@ int sfp_get_module_eeprom(struct sfp_bus
- 			  u8 *data);
- void sfp_upstream_start(struct sfp_bus *bus);
- void sfp_upstream_stop(struct sfp_bus *bus);
--struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode,
--				      void *upstream,
--				      const struct sfp_upstream_ops *ops);
-+struct sfp_bus *sfp_register_upstream_node(struct fwnode_handle *fwnode,
-+					   void *upstream,
-+					   const struct sfp_upstream_ops *ops);
- void sfp_unregister_upstream(struct sfp_bus *bus);
- #else
- static inline int sfp_parse_port(struct sfp_bus *bus,
-@@ -553,11 +553,11 @@ static inline void sfp_upstream_stop(str
- {
- }
- 
--static inline struct sfp_bus *sfp_register_upstream(
-+static inline struct sfp_bus *sfp_register_upstream_node(
- 	struct fwnode_handle *fwnode, void *upstream,
- 	const struct sfp_upstream_ops *ops)
- {
--	return (struct sfp_bus *)-1;
-+	return NULL;
- }
- 
- static inline void sfp_unregister_upstream(struct sfp_bus *bus)
diff --git a/target/linux/generic/backport-5.4/717-v5.5-net-sfp-rework-upstream-interface.patch b/target/linux/generic/backport-5.4/717-v5.5-net-sfp-rework-upstream-interface.patch
deleted file mode 100644
index 9175f2557a..0000000000
--- a/target/linux/generic/backport-5.4/717-v5.5-net-sfp-rework-upstream-interface.patch
+++ /dev/null
@@ -1,254 +0,0 @@
-From 863b5b6941f9f43b924393b6ba2b36647e7dee42 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 7 Nov 2019 17:06:08 +0000
-Subject: [PATCH 615/660] net: sfp: rework upstream interface
-
-The current upstream interface is an all-or-nothing, which is
-sub-optimal for future changes, as it doesn't allow the upstream driver
-to prepare for the SFP module becoming available, as it is at boot.
-
-Switch to a find-sfp-bus, add-upstream, del-upstream, put-sfp-bus
-interface structure instead, which allows the upstream driver to
-prepare for a module being available as soon as add-upstream is called.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 10 +++--
- drivers/net/phy/sfp-bus.c | 92 +++++++++++++++++++++++++++------------
- include/linux/sfp.h       | 25 +++++++----
- 3 files changed, 88 insertions(+), 39 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -568,7 +568,7 @@ static int phylink_register_sfp(struct p
- 	struct sfp_bus *bus;
- 	int ret;
- 
--	bus = sfp_register_upstream_node(fwnode, pl, &sfp_phylink_ops);
-+	bus = sfp_bus_find_fwnode(fwnode);
- 	if (IS_ERR(bus)) {
- 		ret = PTR_ERR(bus);
- 		phylink_err(pl, "unable to attach SFP bus: %d\n", ret);
-@@ -577,7 +577,10 @@ static int phylink_register_sfp(struct p
- 
- 	pl->sfp_bus = bus;
- 
--	return 0;
-+	ret = sfp_bus_add_upstream(bus, pl, &sfp_phylink_ops);
-+	sfp_bus_put(bus);
-+
-+	return ret;
- }
- 
- /**
-@@ -675,8 +678,7 @@ EXPORT_SYMBOL_GPL(phylink_create);
-  */
- void phylink_destroy(struct phylink *pl)
- {
--	if (pl->sfp_bus)
--		sfp_unregister_upstream(pl->sfp_bus);
-+	sfp_bus_del_upstream(pl->sfp_bus);
- 	if (pl->link_gpio)
- 		gpiod_put(pl->link_gpio);
- 
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -404,10 +404,19 @@ static void sfp_bus_release(struct kref
- 	kfree(bus);
- }
- 
--static void sfp_bus_put(struct sfp_bus *bus)
-+/**
-+ * sfp_bus_put() - put a reference on the &struct sfp_bus
-+ * bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
-+ *
-+ * Put a reference on the &struct sfp_bus and free the underlying structure
-+ * if this was the last reference.
-+ */
-+void sfp_bus_put(struct sfp_bus *bus)
- {
--	kref_put_mutex(&bus->kref, sfp_bus_release, &sfp_mutex);
-+	if (bus)
-+		kref_put_mutex(&bus->kref, sfp_bus_release, &sfp_mutex);
- }
-+EXPORT_SYMBOL_GPL(sfp_bus_put);
- 
- static int sfp_register_bus(struct sfp_bus *bus)
- {
-@@ -423,11 +432,11 @@ static int sfp_register_bus(struct sfp_b
- 				return ret;
- 		}
- 	}
-+	bus->registered = true;
- 	bus->socket_ops->attach(bus->sfp);
- 	if (bus->started)
- 		bus->socket_ops->start(bus->sfp);
- 	bus->upstream_ops->attach(bus->upstream, bus);
--	bus->registered = true;
- 	return 0;
- }
- 
-@@ -521,13 +530,12 @@ static void sfp_upstream_clear(struct sf
- }
- 
- /**
-- * sfp_register_upstream_node() - parse and register the neighbouring device
-+ * sfp_bus_find_fwnode() - parse and locate the SFP bus from fwnode
-  * @fwnode: firmware node for the parent device (MAC or PHY)
-- * @upstream: the upstream private data
-- * @ops: the upstream's &struct sfp_upstream_ops
-  *
-- * Parse the parent device's firmware node for a SFP bus, and register the
-- * SFP bus using sfp_register_upstream().
-+ * Parse the parent device's firmware node for a SFP bus, and locate
-+ * the sfp_bus structure, incrementing its reference count.  This must
-+ * be put via sfp_bus_put() when done.
-  *
-  * Returns: on success, a pointer to the sfp_bus structure,
-  *	    %NULL if no SFP is specified,
-@@ -537,9 +545,7 @@ static void sfp_upstream_clear(struct sf
-  * 	        %-ENOMEM if we failed to allocate the bus.
-  *		an error from the upstream's connect_phy() method.
-  */
--struct sfp_bus *sfp_register_upstream_node(struct fwnode_handle *fwnode,
--					   void *upstream,
--					   const struct sfp_upstream_ops *ops)
-+struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
- {
- 	struct fwnode_reference_args ref;
- 	struct sfp_bus *bus;
-@@ -557,7 +563,39 @@ struct sfp_bus *sfp_register_upstream_no
- 	if (!bus)
- 		return ERR_PTR(-ENOMEM);
- 
-+	return bus;
-+}
-+EXPORT_SYMBOL_GPL(sfp_bus_find_fwnode);
-+
-+/**
-+ * sfp_bus_add_upstream() - parse and register the neighbouring device
-+ * @bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
-+ * @upstream: the upstream private data
-+ * @ops: the upstream's &struct sfp_upstream_ops
-+ *
-+ * Add upstream driver for the SFP bus, and if the bus is complete, register
-+ * the SFP bus using sfp_register_upstream().  This takes a reference on the
-+ * bus, so it is safe to put the bus after this call.
-+ *
-+ * Returns: on success, a pointer to the sfp_bus structure,
-+ *	    %NULL if no SFP is specified,
-+ * 	    on failure, an error pointer value:
-+ * 		corresponding to the errors detailed for
-+ * 		fwnode_property_get_reference_args().
-+ * 	        %-ENOMEM if we failed to allocate the bus.
-+ *		an error from the upstream's connect_phy() method.
-+ */
-+int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
-+			 const struct sfp_upstream_ops *ops)
-+{
-+	int ret;
-+
-+	/* If no bus, return success */
-+	if (!bus)
-+		return 0;
-+
- 	rtnl_lock();
-+	kref_get(&bus->kref);
- 	bus->upstream_ops = ops;
- 	bus->upstream = upstream;
- 
-@@ -570,33 +608,33 @@ struct sfp_bus *sfp_register_upstream_no
- 	}
- 	rtnl_unlock();
- 
--	if (ret) {
-+	if (ret)
- 		sfp_bus_put(bus);
--		bus = ERR_PTR(ret);
--	}
- 
--	return bus;
-+	return ret;
- }
--EXPORT_SYMBOL_GPL(sfp_register_upstream_node);
-+EXPORT_SYMBOL_GPL(sfp_bus_add_upstream);
- 
- /**
-- * sfp_unregister_upstream() - Unregister sfp bus
-+ * sfp_bus_del_upstream() - Delete a sfp bus
-  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
-  *
-- * Unregister a previously registered upstream connection for the SFP
-- * module. @bus is returned from sfp_register_upstream().
-+ * Delete a previously registered upstream connection for the SFP
-+ * module. @bus should have been added by sfp_bus_add_upstream().
-  */
--void sfp_unregister_upstream(struct sfp_bus *bus)
-+void sfp_bus_del_upstream(struct sfp_bus *bus)
- {
--	rtnl_lock();
--	if (bus->sfp)
--		sfp_unregister_bus(bus);
--	sfp_upstream_clear(bus);
--	rtnl_unlock();
-+	if (bus) {
-+		rtnl_lock();
-+		if (bus->sfp)
-+			sfp_unregister_bus(bus);
-+		sfp_upstream_clear(bus);
-+		rtnl_unlock();
- 
--	sfp_bus_put(bus);
-+		sfp_bus_put(bus);
-+	}
- }
--EXPORT_SYMBOL_GPL(sfp_unregister_upstream);
-+EXPORT_SYMBOL_GPL(sfp_bus_del_upstream);
- 
- /* Socket driver entry points */
- int sfp_add_phy(struct sfp_bus *bus, struct phy_device *phydev)
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -508,10 +508,11 @@ int sfp_get_module_eeprom(struct sfp_bus
- 			  u8 *data);
- void sfp_upstream_start(struct sfp_bus *bus);
- void sfp_upstream_stop(struct sfp_bus *bus);
--struct sfp_bus *sfp_register_upstream_node(struct fwnode_handle *fwnode,
--					   void *upstream,
--					   const struct sfp_upstream_ops *ops);
--void sfp_unregister_upstream(struct sfp_bus *bus);
-+void sfp_bus_put(struct sfp_bus *bus);
-+struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode);
-+int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
-+			 const struct sfp_upstream_ops *ops);
-+void sfp_bus_del_upstream(struct sfp_bus *bus);
- #else
- static inline int sfp_parse_port(struct sfp_bus *bus,
- 				 const struct sfp_eeprom_id *id,
-@@ -553,14 +554,22 @@ static inline void sfp_upstream_stop(str
- {
- }
- 
--static inline struct sfp_bus *sfp_register_upstream_node(
--	struct fwnode_handle *fwnode, void *upstream,
--	const struct sfp_upstream_ops *ops)
-+static inline void sfp_bus_put(struct sfp_bus *bus)
-+{
-+}
-+
-+static inline struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
- {
- 	return NULL;
- }
- 
--static inline void sfp_unregister_upstream(struct sfp_bus *bus)
-+static int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
-+				const struct sfp_upstream_ops *ops)
-+{
-+	return 0;
-+}
-+
-+static inline void sfp_bus_del_upstream(struct sfp_bus *bus)
- {
- }
- #endif
diff --git a/target/linux/generic/backport-5.4/718-v5.5-net-sfp-fix-sfp_bus_put-kernel-documentation.patch b/target/linux/generic/backport-5.4/718-v5.5-net-sfp-fix-sfp_bus_put-kernel-documentation.patch
deleted file mode 100644
index c7bfd8a304..0000000000
--- a/target/linux/generic/backport-5.4/718-v5.5-net-sfp-fix-sfp_bus_put-kernel-documentation.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From ea7bfd81921827d334c2a23bd11ef0e4e2abafd2 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 9 Nov 2019 08:13:50 +0000
-Subject: [PATCH 616/660] net: sfp: fix sfp_bus_put() kernel documentation
-
-The kbuild test robot found a problem with htmldocs with the recent
-change to the SFP interfaces.  Fix the kernel documentation for
-sfp_bus_put() which was missing an '@' before the argument name
-description.
-
-Fixes: 727b3668b730 ("net: sfp: rework upstream interface")
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp-bus.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -406,7 +406,7 @@ static void sfp_bus_release(struct kref
- 
- /**
-  * sfp_bus_put() - put a reference on the &struct sfp_bus
-- * bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
-+ * @bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
-  *
-  * Put a reference on the &struct sfp_bus and free the underlying structure
-  * if this was the last reference.
diff --git a/target/linux/generic/backport-5.4/719-v5.5-net-sfp-fix-sfp_bus_add_upstream-warning.patch b/target/linux/generic/backport-5.4/719-v5.5-net-sfp-fix-sfp_bus_add_upstream-warning.patch
deleted file mode 100644
index 9528049e1b..0000000000
--- a/target/linux/generic/backport-5.4/719-v5.5-net-sfp-fix-sfp_bus_add_upstream-warning.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From f76d84cd85f8bd3f083495f7ca723822cba8abc9 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Mon, 11 Nov 2019 10:23:35 +0000
-Subject: [PATCH 617/660] net: sfp: fix sfp_bus_add_upstream() warning
-
-When building with SFP disabled, the stub for sfp_bus_add_upstream()
-missed "inline".  Add it.
-
-Fixes: 727b3668b730 ("net: sfp: rework upstream interface")
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- include/linux/sfp.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -563,8 +563,8 @@ static inline struct sfp_bus *sfp_bus_fi
- 	return NULL;
- }
- 
--static int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
--				const struct sfp_upstream_ops *ops)
-+static inline int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
-+				       const struct sfp_upstream_ops *ops)
- {
- 	return 0;
- }
diff --git a/target/linux/generic/backport-5.4/720-v5.5-net-sfp-move-sfp-sub-state-machines-into-separate-fu.patch b/target/linux/generic/backport-5.4/720-v5.5-net-sfp-move-sfp-sub-state-machines-into-separate-fu.patch
deleted file mode 100644
index e4ca85b6e2..0000000000
--- a/target/linux/generic/backport-5.4/720-v5.5-net-sfp-move-sfp-sub-state-machines-into-separate-fu.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From b9d6ed5cdb67533feda7f221eb06f2f9f1ff5047 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 11 Oct 2019 19:33:58 +0100
-Subject: [PATCH 618/660] net: sfp: move sfp sub-state machines into separate
- functions
-
-Move the SFP sub-state machines out of the main state machine function,
-in preparation for it doing a bit more with the device state.  By doing
-so, we ensure that our debug after the main state machine is always
-printed.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 74 +++++++++++++++++++++++++------------------
- 1 file changed, 43 insertions(+), 31 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1544,19 +1544,34 @@ static void sfp_sm_mod_remove(struct sfp
- 	dev_info(sfp->dev, "module removed\n");
- }
- 
--static void sfp_sm_event(struct sfp *sfp, unsigned int event)
-+/* This state machine tracks the netdev up/down state */
-+static void sfp_sm_device(struct sfp *sfp, unsigned int event)
- {
--	mutex_lock(&sfp->sm_mutex);
-+	switch (sfp->sm_dev_state) {
-+	default:
-+		if (event == SFP_E_DEV_UP)
-+			sfp->sm_dev_state = SFP_DEV_UP;
-+		break;
- 
--	dev_dbg(sfp->dev, "SM: enter %s:%s:%s event %s\n",
--		mod_state_to_str(sfp->sm_mod_state),
--		dev_state_to_str(sfp->sm_dev_state),
--		sm_state_to_str(sfp->sm_state),
--		event_to_str(event));
-+	case SFP_DEV_UP:
-+		if (event == SFP_E_DEV_DOWN) {
-+			/* If the module has a PHY, avoid raising TX disable
-+			 * as this resets the PHY. Otherwise, raise it to
-+			 * turn the laser off.
-+			 */
-+			if (!sfp->mod_phy)
-+				sfp_module_tx_disable(sfp);
-+			sfp->sm_dev_state = SFP_DEV_DOWN;
-+		}
-+		break;
-+	}
-+}
- 
--	/* This state machine tracks the insert/remove state of
--	 * the module, and handles probing the on-board EEPROM.
--	 */
-+/* This state machine tracks the insert/remove state of
-+ * the module, and handles probing the on-board EEPROM.
-+ */
-+static void sfp_sm_module(struct sfp *sfp, unsigned int event)
-+{
- 	switch (sfp->sm_mod_state) {
- 	default:
- 		if (event == SFP_E_INSERT && sfp->attached) {
-@@ -1596,27 +1611,10 @@ static void sfp_sm_event(struct sfp *sfp
- 		}
- 		break;
- 	}
-+}
- 
--	/* This state machine tracks the netdev up/down state */
--	switch (sfp->sm_dev_state) {
--	default:
--		if (event == SFP_E_DEV_UP)
--			sfp->sm_dev_state = SFP_DEV_UP;
--		break;
--
--	case SFP_DEV_UP:
--		if (event == SFP_E_DEV_DOWN) {
--			/* If the module has a PHY, avoid raising TX disable
--			 * as this resets the PHY. Otherwise, raise it to
--			 * turn the laser off.
--			 */
--			if (!sfp->mod_phy)
--				sfp_module_tx_disable(sfp);
--			sfp->sm_dev_state = SFP_DEV_DOWN;
--		}
--		break;
--	}
--
-+static void sfp_sm_main(struct sfp *sfp, unsigned int event)
-+{
- 	/* Some events are global */
- 	if (sfp->sm_state != SFP_S_DOWN &&
- 	    (sfp->sm_mod_state != SFP_MOD_PRESENT ||
-@@ -1627,7 +1625,6 @@ static void sfp_sm_event(struct sfp *sfp
- 		if (sfp->mod_phy)
- 			sfp_sm_phy_detach(sfp);
- 		sfp_sm_next(sfp, SFP_S_DOWN, 0);
--		mutex_unlock(&sfp->sm_mutex);
- 		return;
- 	}
- 
-@@ -1682,6 +1679,21 @@ static void sfp_sm_event(struct sfp *sfp
- 	case SFP_S_TX_DISABLE:
- 		break;
- 	}
-+}
-+
-+static void sfp_sm_event(struct sfp *sfp, unsigned int event)
-+{
-+	mutex_lock(&sfp->sm_mutex);
-+
-+	dev_dbg(sfp->dev, "SM: enter %s:%s:%s event %s\n",
-+		mod_state_to_str(sfp->sm_mod_state),
-+		dev_state_to_str(sfp->sm_dev_state),
-+		sm_state_to_str(sfp->sm_state),
-+		event_to_str(event));
-+
-+	sfp_sm_module(sfp, event);
-+	sfp_sm_device(sfp, event);
-+	sfp_sm_main(sfp, event);
- 
- 	dev_dbg(sfp->dev, "SM: exit %s:%s:%s\n",
- 		mod_state_to_str(sfp->sm_mod_state),
diff --git a/target/linux/generic/backport-5.4/721-v5.5-net-sfp-move-tx-disable-on-device-down-to-main-state.patch b/target/linux/generic/backport-5.4/721-v5.5-net-sfp-move-tx-disable-on-device-down-to-main-state.patch
deleted file mode 100644
index 71021c8f4e..0000000000
--- a/target/linux/generic/backport-5.4/721-v5.5-net-sfp-move-tx-disable-on-device-down-to-main-state.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 7e89b737c97a9e7a81dd1584000bc136b92f12fd Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 11 Oct 2019 22:14:47 +0100
-Subject: [PATCH 619/660] net: sfp: move tx disable on device down to main
- state machine
-
-Move the tx disable assertion on device down to the main state
-machine.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 10 ++--------
- 1 file changed, 2 insertions(+), 8 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1554,15 +1554,8 @@ static void sfp_sm_device(struct sfp *sf
- 		break;
- 
- 	case SFP_DEV_UP:
--		if (event == SFP_E_DEV_DOWN) {
--			/* If the module has a PHY, avoid raising TX disable
--			 * as this resets the PHY. Otherwise, raise it to
--			 * turn the laser off.
--			 */
--			if (!sfp->mod_phy)
--				sfp_module_tx_disable(sfp);
-+		if (event == SFP_E_DEV_DOWN)
- 			sfp->sm_dev_state = SFP_DEV_DOWN;
--		}
- 		break;
- 	}
- }
-@@ -1624,6 +1617,7 @@ static void sfp_sm_main(struct sfp *sfp,
- 			sfp_sm_link_down(sfp);
- 		if (sfp->mod_phy)
- 			sfp_sm_phy_detach(sfp);
-+		sfp_module_tx_disable(sfp);
- 		sfp_sm_next(sfp, SFP_S_DOWN, 0);
- 		return;
- 	}
diff --git a/target/linux/generic/backport-5.4/722-v5.5-net-sfp-rename-sfp_sm_ins_next-as-sfp_sm_mod_next.patch b/target/linux/generic/backport-5.4/722-v5.5-net-sfp-rename-sfp_sm_ins_next-as-sfp_sm_mod_next.patch
deleted file mode 100644
index 2974586b13..0000000000
--- a/target/linux/generic/backport-5.4/722-v5.5-net-sfp-rename-sfp_sm_ins_next-as-sfp_sm_mod_next.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From f2a1ccfc4ad4f97c98c3cc18eb32992151ce089a Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 11 Oct 2019 22:27:21 +0100
-Subject: [PATCH 620/660] net: sfp: rename sfp_sm_ins_next() as
- sfp_sm_mod_next()
-
-sfp_sm_ins_next() modifies the module state machine.  Change it's name
-to reflect this.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1245,7 +1245,7 @@ static void sfp_sm_next(struct sfp *sfp,
- 	sfp_sm_set_timer(sfp, timeout);
- }
- 
--static void sfp_sm_ins_next(struct sfp *sfp, unsigned int state,
-+static void sfp_sm_mod_next(struct sfp *sfp, unsigned int state,
- 			    unsigned int timeout)
- {
- 	sfp->sm_mod_state = state;
-@@ -1569,22 +1569,22 @@ static void sfp_sm_module(struct sfp *sf
- 	default:
- 		if (event == SFP_E_INSERT && sfp->attached) {
- 			sfp_module_tx_disable(sfp);
--			sfp_sm_ins_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT);
-+			sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT);
- 		}
- 		break;
- 
- 	case SFP_MOD_PROBE:
- 		if (event == SFP_E_REMOVE) {
--			sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0);
-+			sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
- 		} else if (event == SFP_E_TIMEOUT) {
- 			int val = sfp_sm_mod_probe(sfp);
- 
- 			if (val == 0)
--				sfp_sm_ins_next(sfp, SFP_MOD_PRESENT, 0);
-+				sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
- 			else if (val > 0)
--				sfp_sm_ins_next(sfp, SFP_MOD_HPOWER, val);
-+				sfp_sm_mod_next(sfp, SFP_MOD_HPOWER, val);
- 			else if (val != -EAGAIN)
--				sfp_sm_ins_next(sfp, SFP_MOD_ERROR, 0);
-+				sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
- 			else
- 				sfp_sm_set_timer(sfp, T_PROBE_RETRY);
- 		}
-@@ -1592,7 +1592,7 @@ static void sfp_sm_module(struct sfp *sf
- 
- 	case SFP_MOD_HPOWER:
- 		if (event == SFP_E_TIMEOUT) {
--			sfp_sm_ins_next(sfp, SFP_MOD_PRESENT, 0);
-+			sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
- 			break;
- 		}
- 		/* fallthrough */
-@@ -1600,7 +1600,7 @@ static void sfp_sm_module(struct sfp *sf
- 	case SFP_MOD_ERROR:
- 		if (event == SFP_E_REMOVE) {
- 			sfp_sm_mod_remove(sfp);
--			sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0);
-+			sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
- 		}
- 		break;
- 	}
diff --git a/target/linux/generic/backport-5.4/723-v5.5-net-sfp-handle-module-remove-outside-state-machine.patch b/target/linux/generic/backport-5.4/723-v5.5-net-sfp-handle-module-remove-outside-state-machine.patch
deleted file mode 100644
index 62cdb8a6ce..0000000000
--- a/target/linux/generic/backport-5.4/723-v5.5-net-sfp-handle-module-remove-outside-state-machine.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From d2591ea5520e2ee8fa557f96bb64c23cafac4b20 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 15 Oct 2019 10:33:13 +0100
-Subject: [PATCH 621/660] net: sfp: handle module remove outside state machine
-
-Removing a module resets the module state machine back to its initial
-state.  Rather than explicitly handling this in every state, handle it
-early on outside of the state machine.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 16 +++++++++-------
- 1 file changed, 9 insertions(+), 7 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1565,6 +1565,14 @@ static void sfp_sm_device(struct sfp *sf
-  */
- static void sfp_sm_module(struct sfp *sfp, unsigned int event)
- {
-+	/* Handle remove event globally, it resets this state machine */
-+	if (event == SFP_E_REMOVE) {
-+		if (sfp->sm_mod_state > SFP_MOD_PROBE)
-+			sfp_sm_mod_remove(sfp);
-+		sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
-+		return;
-+	}
-+
- 	switch (sfp->sm_mod_state) {
- 	default:
- 		if (event == SFP_E_INSERT && sfp->attached) {
-@@ -1574,9 +1582,7 @@ static void sfp_sm_module(struct sfp *sf
- 		break;
- 
- 	case SFP_MOD_PROBE:
--		if (event == SFP_E_REMOVE) {
--			sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
--		} else if (event == SFP_E_TIMEOUT) {
-+		if (event == SFP_E_TIMEOUT) {
- 			int val = sfp_sm_mod_probe(sfp);
- 
- 			if (val == 0)
-@@ -1598,10 +1604,6 @@ static void sfp_sm_module(struct sfp *sf
- 		/* fallthrough */
- 	case SFP_MOD_PRESENT:
- 	case SFP_MOD_ERROR:
--		if (event == SFP_E_REMOVE) {
--			sfp_sm_mod_remove(sfp);
--			sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
--		}
- 		break;
- 	}
- }
diff --git a/target/linux/generic/backport-5.4/724-v5.5-net-sfp-rename-T_PROBE_WAIT-to-T_SERIAL.patch b/target/linux/generic/backport-5.4/724-v5.5-net-sfp-rename-T_PROBE_WAIT-to-T_SERIAL.patch
deleted file mode 100644
index 780e7d7876..0000000000
--- a/target/linux/generic/backport-5.4/724-v5.5-net-sfp-rename-T_PROBE_WAIT-to-T_SERIAL.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 615090acb3c0b41691f3a03522ea38350387c0e4 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 15 Oct 2019 10:54:15 +0100
-Subject: [PATCH 622/660] net: sfp: rename T_PROBE_WAIT to T_SERIAL
-
-SFF-8472 rev 12.2 defines the time for the serial bus to become ready
-using t_serial.  Use this as our identifier for this timeout to make
-it clear what we are referring to.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 13 ++++++-------
- 1 file changed, 6 insertions(+), 7 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -149,11 +149,10 @@ static const enum gpiod_flags gpio_flags
-  * the same length on the PCB, which means it's possible for MOD DEF 0 to
-  * connect before the I2C bus on MOD DEF 1/2.
-  *
-- * The SFP MSA specifies 300ms as t_init (the time taken for TX_FAULT to
-- * be deasserted) but makes no mention of the earliest time before we can
-- * access the I2C EEPROM.  However, Avago modules require 300ms.
-+ * The SFF-8472 specifies t_serial ("Time from power on until module is
-+ * ready for data transmission over the two wire serial bus.") as 300ms.
-  */
--#define T_PROBE_INIT	msecs_to_jiffies(300)
-+#define T_SERIAL	msecs_to_jiffies(300)
- #define T_HPOWER_LEVEL	msecs_to_jiffies(300)
- #define T_PROBE_RETRY	msecs_to_jiffies(100)
- 
-@@ -1560,8 +1559,8 @@ static void sfp_sm_device(struct sfp *sf
- 	}
- }
- 
--/* This state machine tracks the insert/remove state of
-- * the module, and handles probing the on-board EEPROM.
-+/* This state machine tracks the insert/remove state of the module, probes
-+ * the on-board EEPROM, and sets up the power level.
-  */
- static void sfp_sm_module(struct sfp *sfp, unsigned int event)
- {
-@@ -1577,7 +1576,7 @@ static void sfp_sm_module(struct sfp *sf
- 	default:
- 		if (event == SFP_E_INSERT && sfp->attached) {
- 			sfp_module_tx_disable(sfp);
--			sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT);
-+			sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL);
- 		}
- 		break;
- 
diff --git a/target/linux/generic/backport-5.4/725-v5.5-net-sfp-parse-SFP-power-requirement-earlier.patch b/target/linux/generic/backport-5.4/725-v5.5-net-sfp-parse-SFP-power-requirement-earlier.patch
deleted file mode 100644
index df5ef9f79e..0000000000
--- a/target/linux/generic/backport-5.4/725-v5.5-net-sfp-parse-SFP-power-requirement-earlier.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From d4b8746219e8c0361e5ed6e440ab3a8a600d1f76 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 11 Oct 2019 17:24:40 +0100
-Subject: [PATCH 623/660] net: sfp: parse SFP power requirement earlier
-
-Parse the SFP power requirement earlier, in preparation for moving the
-power level setup code.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 42 +++++++++++++++++++++++++++++-------------
- 1 file changed, 29 insertions(+), 13 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -198,6 +198,8 @@ struct sfp {
- 	unsigned int sm_retries;
- 
- 	struct sfp_eeprom_id id;
-+	unsigned int module_power_mW;
-+
- #if IS_ENABLED(CONFIG_HWMON)
- 	struct sfp_diag diag;
- 	struct device *hwmon_dev;
-@@ -1374,17 +1376,14 @@ static void sfp_sm_mod_init(struct sfp *
- 		sfp_sm_probe_phy(sfp);
- }
- 
--static int sfp_sm_mod_hpower(struct sfp *sfp)
-+static int sfp_module_parse_power(struct sfp *sfp)
- {
--	u32 power;
--	u8 val;
--	int err;
-+	u32 power_mW = 1000;
- 
--	power = 1000;
- 	if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_POWER_DECL))
--		power = 1500;
-+		power_mW = 1500;
- 	if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_HIGH_POWER_LEVEL))
--		power = 2000;
-+		power_mW = 2000;
- 
- 	if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE &&
- 	    (sfp->id.ext.diagmon & (SFP_DIAGMON_DDM | SFP_DIAGMON_ADDRMODE)) !=
-@@ -1393,23 +1392,33 @@ static int sfp_sm_mod_hpower(struct sfp
- 		 * or requires an address change sequence, so assume that
- 		 * the module powers up in the indicated power mode.
- 		 */
--		if (power > sfp->max_power_mW) {
-+		if (power_mW > sfp->max_power_mW) {
- 			dev_err(sfp->dev,
- 				"Host does not support %u.%uW modules\n",
--				power / 1000, (power / 100) % 10);
-+				power_mW / 1000, (power_mW / 100) % 10);
- 			return -EINVAL;
- 		}
- 		return 0;
- 	}
- 
--	if (power > sfp->max_power_mW) {
-+	if (power_mW > sfp->max_power_mW) {
- 		dev_warn(sfp->dev,
- 			 "Host does not support %u.%uW modules, module left in power mode 1\n",
--			 power / 1000, (power / 100) % 10);
-+			 power_mW / 1000, (power_mW / 100) % 10);
- 		return 0;
- 	}
- 
--	if (power <= 1000)
-+	sfp->module_power_mW = power_mW;
-+
-+	return 0;
-+}
-+
-+static int sfp_sm_mod_hpower(struct sfp *sfp)
-+{
-+	u8 val;
-+	int err;
-+
-+	if (sfp->module_power_mW <= 1000)
- 		return 0;
- 
- 	err = sfp_read(sfp, true, SFP_EXT_STATUS, &val, sizeof(val));
-@@ -1429,7 +1438,8 @@ static int sfp_sm_mod_hpower(struct sfp
- 	}
- 
- 	dev_info(sfp->dev, "Module switched to %u.%uW power level\n",
--		 power / 1000, (power / 100) % 10);
-+		 sfp->module_power_mW / 1000,
-+		 (sfp->module_power_mW / 100) % 10);
- 	return T_HPOWER_LEVEL;
- 
- err:
-@@ -1516,6 +1526,11 @@ static int sfp_sm_mod_probe(struct sfp *
- 		dev_warn(sfp->dev,
- 			 "module address swap to access page 0xA2 is not supported.\n");
- 
-+	/* Parse the module power requirement */
-+	ret = sfp_module_parse_power(sfp);
-+	if (ret < 0)
-+		return ret;
-+
- 	ret = sfp_hwmon_insert(sfp);
- 	if (ret < 0)
- 		return ret;
-@@ -1539,6 +1554,7 @@ static void sfp_sm_mod_remove(struct sfp
- 	sfp_module_tx_disable(sfp);
- 
- 	memset(&sfp->id, 0, sizeof(sfp->id));
-+	sfp->module_power_mW = 0;
- 
- 	dev_info(sfp->dev, "module removed\n");
- }
diff --git a/target/linux/generic/backport-5.4/726-v5.5-net-sfp-avoid-power-switch-on-address-change-modules.patch b/target/linux/generic/backport-5.4/726-v5.5-net-sfp-avoid-power-switch-on-address-change-modules.patch
deleted file mode 100644
index 5237f55055..0000000000
--- a/target/linux/generic/backport-5.4/726-v5.5-net-sfp-avoid-power-switch-on-address-change-modules.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From dca678b8838945572cf50584cb33a7199c1fd397 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 17 Oct 2019 00:24:18 +0100
-Subject: [PATCH 624/660] net: sfp: avoid power switch on address-change
- modules
-
-If the module indicates that it requires an address change sequence to
-switch between address 0x50 and 0x51, which we don't support, we can't
-write to the register that controls the power mode to switch to high
-power mode.  Warn the user that the module may not be functional in
-this case, and don't try to change the power mode.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 31 ++++++++++++++++++++-----------
- 1 file changed, 20 insertions(+), 11 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1385,25 +1385,34 @@ static int sfp_module_parse_power(struct
- 	if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_HIGH_POWER_LEVEL))
- 		power_mW = 2000;
- 
--	if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE &&
--	    (sfp->id.ext.diagmon & (SFP_DIAGMON_DDM | SFP_DIAGMON_ADDRMODE)) !=
--	    SFP_DIAGMON_DDM) {
--		/* The module appears not to implement bus address 0xa2,
--		 * or requires an address change sequence, so assume that
--		 * the module powers up in the indicated power mode.
--		 */
--		if (power_mW > sfp->max_power_mW) {
-+	if (power_mW > sfp->max_power_mW) {
-+		/* Module power specification exceeds the allowed maximum. */
-+		if (sfp->id.ext.sff8472_compliance ==
-+			SFP_SFF8472_COMPLIANCE_NONE &&
-+		    !(sfp->id.ext.diagmon & SFP_DIAGMON_DDM)) {
-+			/* The module appears not to implement bus address
-+			 * 0xa2, so assume that the module powers up in the
-+			 * indicated mode.
-+			 */
- 			dev_err(sfp->dev,
- 				"Host does not support %u.%uW modules\n",
- 				power_mW / 1000, (power_mW / 100) % 10);
- 			return -EINVAL;
-+		} else {
-+			dev_warn(sfp->dev,
-+				 "Host does not support %u.%uW modules, module left in power mode 1\n",
-+				 power_mW / 1000, (power_mW / 100) % 10);
-+			return 0;
- 		}
--		return 0;
- 	}
- 
--	if (power_mW > sfp->max_power_mW) {
-+	/* If the module requires a higher power mode, but also requires
-+	 * an address change sequence, warn the user that the module may
-+	 * not be functional.
-+	 */
-+	if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE && power_mW > 1000) {
- 		dev_warn(sfp->dev,
--			 "Host does not support %u.%uW modules, module left in power mode 1\n",
-+			 "Address Change Sequence not supported but module requies %u.%uW, module may not be functional\n",
- 			 power_mW / 1000, (power_mW / 100) % 10);
- 		return 0;
- 	}
diff --git a/target/linux/generic/backport-5.4/727-v5.5-net-sfp-control-TX_DISABLE-and-phy-only-from-main-st.patch b/target/linux/generic/backport-5.4/727-v5.5-net-sfp-control-TX_DISABLE-and-phy-only-from-main-st.patch
deleted file mode 100644
index eebcac639f..0000000000
--- a/target/linux/generic/backport-5.4/727-v5.5-net-sfp-control-TX_DISABLE-and-phy-only-from-main-st.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From df5c4d93c5a59cba0f7479a4cd4e22b50726ce88 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 17 Oct 2019 11:12:42 +0100
-Subject: [PATCH 625/660] net: sfp: control TX_DISABLE and phy only from main
- state machine
-
-We initialise TX_DISABLE when the sfp cage is probed, and then
-maintain its state in the main state machine.  However, the module
-state machine:
-- negates it when detecting a newly inserted module when it's already
-  guaranteed to be negated.
-- negates it when the module is removed, but the main state machine
-  will do this anyway.
-
-Make TX_DISABLE entirely controlled by the main state machine.
-
-The main state machine also probes the module for a PHY, and removes
-the PHY when the the module is removed.  Hence, removing the PHY in
-sfp_sm_module_remove() is also redundant, and is a left-over from
-when we tried to probe for the PHY from the module state machine.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 9 +--------
- 1 file changed, 1 insertion(+), 8 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1557,11 +1557,6 @@ static void sfp_sm_mod_remove(struct sfp
- 
- 	sfp_hwmon_remove(sfp);
- 
--	if (sfp->mod_phy)
--		sfp_sm_phy_detach(sfp);
--
--	sfp_module_tx_disable(sfp);
--
- 	memset(&sfp->id, 0, sizeof(sfp->id));
- 	sfp->module_power_mW = 0;
- 
-@@ -1599,10 +1594,8 @@ static void sfp_sm_module(struct sfp *sf
- 
- 	switch (sfp->sm_mod_state) {
- 	default:
--		if (event == SFP_E_INSERT && sfp->attached) {
--			sfp_module_tx_disable(sfp);
-+		if (event == SFP_E_INSERT && sfp->attached)
- 			sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL);
--		}
- 		break;
- 
- 	case SFP_MOD_PROBE:
diff --git a/target/linux/generic/backport-5.4/728-v5.5-net-sfp-split-the-PHY-probe-from-sfp_sm_mod_init.patch b/target/linux/generic/backport-5.4/728-v5.5-net-sfp-split-the-PHY-probe-from-sfp_sm_mod_init.patch
deleted file mode 100644
index 92df26c6a2..0000000000
--- a/target/linux/generic/backport-5.4/728-v5.5-net-sfp-split-the-PHY-probe-from-sfp_sm_mod_init.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 5ed0bd49b2d3ac4439c2d7f44e5a82b7cf6f409a Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 18 Oct 2019 10:09:02 +0100
-Subject: [PATCH 626/660] net: sfp: split the PHY probe from sfp_sm_mod_init()
-
-Move the PHY probe into a separate function, splitting it from
-sfp_sm_mod_init().  This will allow us to eliminate the 50ms mdelay()
-inside the state machine.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 21 +++++++++++++--------
- 1 file changed, 13 insertions(+), 8 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1353,14 +1353,10 @@ static void sfp_sm_fault(struct sfp *sfp
- static void sfp_sm_mod_init(struct sfp *sfp)
- {
- 	sfp_module_tx_enable(sfp);
-+}
- 
--	/* Wait t_init before indicating that the link is up, provided the
--	 * current state indicates no TX_FAULT.  If TX_FAULT clears before
--	 * this time, that's fine too.
--	 */
--	sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
--	sfp->sm_retries = 5;
--
-+static void sfp_sm_probe_for_phy(struct sfp *sfp)
-+{
- 	/* Setting the serdes link mode is guesswork: there's no
- 	 * field in the EEPROM which indicates what mode should
- 	 * be used.
-@@ -1645,8 +1641,17 @@ static void sfp_sm_main(struct sfp *sfp,
- 	switch (sfp->sm_state) {
- 	case SFP_S_DOWN:
- 		if (sfp->sm_mod_state == SFP_MOD_PRESENT &&
--		    sfp->sm_dev_state == SFP_DEV_UP)
-+		    sfp->sm_dev_state == SFP_DEV_UP) {
- 			sfp_sm_mod_init(sfp);
-+			sfp_sm_probe_for_phy(sfp);
-+
-+			/* Wait t_init before indicating that the link is up,
-+			 * provided the current state indicates no TX_FAULT. If
-+			 * TX_FAULT clears before this time, that's fine too.
-+			 */
-+			sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-+			sfp->sm_retries = 5;
-+		}
- 		break;
- 
- 	case SFP_S_INIT:
diff --git a/target/linux/generic/backport-5.4/729-v5.5-net-sfp-eliminate-mdelay-from-PHY-probe.patch b/target/linux/generic/backport-5.4/729-v5.5-net-sfp-eliminate-mdelay-from-PHY-probe.patch
deleted file mode 100644
index e26a7276d3..0000000000
--- a/target/linux/generic/backport-5.4/729-v5.5-net-sfp-eliminate-mdelay-from-PHY-probe.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From 0fe72afaa31f98ebd71bd6683fc47021105d0157 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 18 Oct 2019 10:21:46 +0100
-Subject: [PATCH 627/660] net: sfp: eliminate mdelay() from PHY probe
-
-Rather than using mdelay() to wait before probing the PHY (which holds
-several locks, including the rtnl lock), add an extra wait state to
-the state machine to introduce the 50ms delay without holding any
-locks.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 52 +++++++++++++++++++++++++++++++++----------
- 1 file changed, 40 insertions(+), 12 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -54,6 +54,7 @@ enum {
- 	SFP_DEV_UP,
- 
- 	SFP_S_DOWN = 0,
-+	SFP_S_WAIT,
- 	SFP_S_INIT,
- 	SFP_S_WAIT_LOS,
- 	SFP_S_LINK_UP,
-@@ -110,6 +111,7 @@ static const char *event_to_str(unsigned
- 
- static const char * const sm_state_strings[] = {
- 	[SFP_S_DOWN] = "down",
-+	[SFP_S_WAIT] = "wait",
- 	[SFP_S_INIT] = "init",
- 	[SFP_S_WAIT_LOS] = "wait_los",
- 	[SFP_S_LINK_UP] = "link_up",
-@@ -141,6 +143,7 @@ static const enum gpiod_flags gpio_flags
- 	GPIOD_ASIS,
- };
- 
-+#define T_WAIT		msecs_to_jiffies(50)
- #define T_INIT_JIFFIES	msecs_to_jiffies(300)
- #define T_RESET_US	10
- #define T_FAULT_RECOVER	msecs_to_jiffies(1000)
-@@ -161,9 +164,6 @@ static const enum gpiod_flags gpio_flags
-  */
- #define SFP_PHY_ADDR	22
- 
--/* Give this long for the PHY to reset. */
--#define T_PHY_RESET_MS	50
--
- struct sff_data {
- 	unsigned int gpios;
- 	bool (*module_supported)(const struct sfp_eeprom_id *id);
-@@ -1267,8 +1267,6 @@ static void sfp_sm_probe_phy(struct sfp
- 	struct phy_device *phy;
- 	int err;
- 
--	msleep(T_PHY_RESET_MS);
--
- 	phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
- 	if (phy == ERR_PTR(-ENODEV)) {
- 		dev_info(sfp->dev, "no PHY detected\n");
-@@ -1623,6 +1621,8 @@ static void sfp_sm_module(struct sfp *sf
- 
- static void sfp_sm_main(struct sfp *sfp, unsigned int event)
- {
-+	unsigned long timeout;
-+
- 	/* Some events are global */
- 	if (sfp->sm_state != SFP_S_DOWN &&
- 	    (sfp->sm_mod_state != SFP_MOD_PRESENT ||
-@@ -1640,17 +1640,45 @@ static void sfp_sm_main(struct sfp *sfp,
- 	/* The main state machine */
- 	switch (sfp->sm_state) {
- 	case SFP_S_DOWN:
--		if (sfp->sm_mod_state == SFP_MOD_PRESENT &&
--		    sfp->sm_dev_state == SFP_DEV_UP) {
--			sfp_sm_mod_init(sfp);
--			sfp_sm_probe_for_phy(sfp);
-+		if (sfp->sm_mod_state != SFP_MOD_PRESENT ||
-+		    sfp->sm_dev_state != SFP_DEV_UP)
-+			break;
-+
-+		sfp_sm_mod_init(sfp);
-+
-+		/* Initialise the fault clearance retries */
-+		sfp->sm_retries = 5;
-+
-+		/* We need to check the TX_FAULT state, which is not defined
-+		 * while TX_DISABLE is asserted. The earliest we want to do
-+		 * anything (such as probe for a PHY) is 50ms.
-+		 */
-+		sfp_sm_next(sfp, SFP_S_WAIT, T_WAIT);
-+		break;
-+
-+	case SFP_S_WAIT:
-+		if (event != SFP_E_TIMEOUT)
-+			break;
-+
-+		sfp_sm_probe_for_phy(sfp);
- 
-+		if (sfp->state & SFP_F_TX_FAULT) {
- 			/* Wait t_init before indicating that the link is up,
- 			 * provided the current state indicates no TX_FAULT. If
- 			 * TX_FAULT clears before this time, that's fine too.
- 			 */
--			sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
--			sfp->sm_retries = 5;
-+			timeout = T_INIT_JIFFIES;
-+			if (timeout > T_WAIT)
-+				timeout -= T_WAIT;
-+			else
-+				timeout = 1;
-+
-+			sfp_sm_next(sfp, SFP_S_INIT, timeout);
-+		} else {
-+			/* TX_FAULT is not asserted, assume the module has
-+			 * finished initialising.
-+			 */
-+			goto init_done;
- 		}
- 		break;
- 
-@@ -1658,7 +1686,7 @@ static void sfp_sm_main(struct sfp *sfp,
- 		if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT)
- 			sfp_sm_fault(sfp, true);
- 		else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR)
--			sfp_sm_link_check_los(sfp);
-+	init_done:	sfp_sm_link_check_los(sfp);
- 		break;
- 
- 	case SFP_S_WAIT_LOS:
diff --git a/target/linux/generic/backport-5.4/730-v5.5-net-sfp-allow-fault-processing-to-transition-to-othe.patch b/target/linux/generic/backport-5.4/730-v5.5-net-sfp-allow-fault-processing-to-transition-to-othe.patch
deleted file mode 100644
index d45b0618bd..0000000000
--- a/target/linux/generic/backport-5.4/730-v5.5-net-sfp-allow-fault-processing-to-transition-to-othe.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 2aa424ee7fbe43e2cd24e28c2f6388c4e1796bd2 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 18 Oct 2019 09:58:33 +0100
-Subject: [PATCH 628/660] net: sfp: allow fault processing to transition to
- other states
-
-Add the next state to sfp_sm_fault() so that it can branch to other
-states. This will be necessary to improve the initialisation path.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1334,7 +1334,7 @@ static bool sfp_los_event_inactive(struc
- 		event == SFP_E_LOS_LOW);
- }
- 
--static void sfp_sm_fault(struct sfp *sfp, bool warn)
-+static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn)
- {
- 	if (sfp->sm_retries && !--sfp->sm_retries) {
- 		dev_err(sfp->dev,
-@@ -1344,7 +1344,7 @@ static void sfp_sm_fault(struct sfp *sfp
- 		if (warn)
- 			dev_err(sfp->dev, "module transmit fault indicated\n");
- 
--		sfp_sm_next(sfp, SFP_S_TX_FAULT, T_FAULT_RECOVER);
-+		sfp_sm_next(sfp, next_state, T_FAULT_RECOVER);
- 	}
- }
- 
-@@ -1684,14 +1684,14 @@ static void sfp_sm_main(struct sfp *sfp,
- 
- 	case SFP_S_INIT:
- 		if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT)
--			sfp_sm_fault(sfp, true);
-+			sfp_sm_fault(sfp, SFP_S_TX_FAULT, true);
- 		else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR)
- 	init_done:	sfp_sm_link_check_los(sfp);
- 		break;
- 
- 	case SFP_S_WAIT_LOS:
- 		if (event == SFP_E_TX_FAULT)
--			sfp_sm_fault(sfp, true);
-+			sfp_sm_fault(sfp, SFP_S_TX_FAULT, true);
- 		else if (sfp_los_event_inactive(sfp, event))
- 			sfp_sm_link_up(sfp);
- 		break;
-@@ -1699,7 +1699,7 @@ static void sfp_sm_main(struct sfp *sfp,
- 	case SFP_S_LINK_UP:
- 		if (event == SFP_E_TX_FAULT) {
- 			sfp_sm_link_down(sfp);
--			sfp_sm_fault(sfp, true);
-+			sfp_sm_fault(sfp, SFP_S_TX_FAULT, true);
- 		} else if (sfp_los_event_active(sfp, event)) {
- 			sfp_sm_link_down(sfp);
- 			sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0);
-@@ -1715,7 +1715,7 @@ static void sfp_sm_main(struct sfp *sfp,
- 
- 	case SFP_S_REINIT:
- 		if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
--			sfp_sm_fault(sfp, false);
-+			sfp_sm_fault(sfp, SFP_S_TX_FAULT, false);
- 		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
- 			dev_info(sfp->dev, "module transmit fault recovered\n");
- 			sfp_sm_link_check_los(sfp);
diff --git a/target/linux/generic/backport-5.4/731-v5.5-net-sfp-ensure-TX_FAULT-has-deasserted-before-probin.patch b/target/linux/generic/backport-5.4/731-v5.5-net-sfp-ensure-TX_FAULT-has-deasserted-before-probin.patch
deleted file mode 100644
index acca29be87..0000000000
--- a/target/linux/generic/backport-5.4/731-v5.5-net-sfp-ensure-TX_FAULT-has-deasserted-before-probin.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 38b62a12231be4b86fc5ca5477579d29831c02a5 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 18 Oct 2019 10:31:07 +0100
-Subject: [PATCH 629/660] net: sfp: ensure TX_FAULT has deasserted before
- probing the PHY
-
-TX_FAULT should be deasserted to indicate that the module has completed
-its initialisation.  This may include the on-board PHY, so wait until
-the module has deasserted TX_FAULT before probing the PHY.
-
-This means that we need an extra state to handle a TX_FAULT that
-remains set for longer than t_init, since using the existing handling
-state would bypass the PHY probe.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 31 +++++++++++++++++++++++++------
- 1 file changed, 25 insertions(+), 6 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -56,6 +56,7 @@ enum {
- 	SFP_S_DOWN = 0,
- 	SFP_S_WAIT,
- 	SFP_S_INIT,
-+	SFP_S_INIT_TX_FAULT,
- 	SFP_S_WAIT_LOS,
- 	SFP_S_LINK_UP,
- 	SFP_S_TX_FAULT,
-@@ -113,6 +114,7 @@ static const char * const sm_state_strin
- 	[SFP_S_DOWN] = "down",
- 	[SFP_S_WAIT] = "wait",
- 	[SFP_S_INIT] = "init",
-+	[SFP_S_INIT_TX_FAULT] = "init_tx_fault",
- 	[SFP_S_WAIT_LOS] = "wait_los",
- 	[SFP_S_LINK_UP] = "link_up",
- 	[SFP_S_TX_FAULT] = "tx_fault",
-@@ -1660,8 +1662,6 @@ static void sfp_sm_main(struct sfp *sfp,
- 		if (event != SFP_E_TIMEOUT)
- 			break;
- 
--		sfp_sm_probe_for_phy(sfp);
--
- 		if (sfp->state & SFP_F_TX_FAULT) {
- 			/* Wait t_init before indicating that the link is up,
- 			 * provided the current state indicates no TX_FAULT. If
-@@ -1683,10 +1683,29 @@ static void sfp_sm_main(struct sfp *sfp,
- 		break;
- 
- 	case SFP_S_INIT:
--		if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT)
--			sfp_sm_fault(sfp, SFP_S_TX_FAULT, true);
--		else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR)
--	init_done:	sfp_sm_link_check_los(sfp);
-+		if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
-+			/* TX_FAULT is still asserted after t_init, so assume
-+			 * there is a fault.
-+			 */
-+			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
-+				     sfp->sm_retries == 5);
-+		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
-+	init_done:	/* TX_FAULT deasserted or we timed out with TX_FAULT
-+			 * clear.  Probe for the PHY and check the LOS state.
-+			 */
-+			sfp_sm_probe_for_phy(sfp);
-+			sfp_sm_link_check_los(sfp);
-+
-+			/* Reset the fault retry count */
-+			sfp->sm_retries = 5;
-+		}
-+		break;
-+
-+	case SFP_S_INIT_TX_FAULT:
-+		if (event == SFP_E_TIMEOUT) {
-+			sfp_module_tx_fault_reset(sfp);
-+			sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-+		}
- 		break;
- 
- 	case SFP_S_WAIT_LOS:
diff --git a/target/linux/generic/backport-5.4/732-v5.5-net-sfp-track-upstream-s-attachment-state-in-state-m.patch b/target/linux/generic/backport-5.4/732-v5.5-net-sfp-track-upstream-s-attachment-state-in-state-m.patch
deleted file mode 100644
index 714d783c4e..0000000000
--- a/target/linux/generic/backport-5.4/732-v5.5-net-sfp-track-upstream-s-attachment-state-in-state-m.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-From ec6036a58f979c66bbd5cd9d0d1c783a98c2c644 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 5 Nov 2019 12:57:40 +0000
-Subject: [PATCH 630/660] net: sfp: track upstream's attachment state in state
- machine
-
-Track the upstream's attachment state in the state machine rather than
-maintaining a boolean, which ensures that we have a strict order of
-ATTACH followed by an UP event - we can never believe that a newly
-attached upstream will be anything but down.
-
-Rearrange the order of state machines so we run the module state
-machine after the upstream device's state machine, so the module state
-machine can check the current state of the device and take action to
-e.g. reset back to empty state when the upstream is detached.
-
-This is to allow the module detection to run independently of the
-network device becoming available.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 42 +++++++++++++++++++++++++++++-------------
- 1 file changed, 29 insertions(+), 13 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -36,6 +36,8 @@ enum {
- 
- 	SFP_E_INSERT = 0,
- 	SFP_E_REMOVE,
-+	SFP_E_DEV_ATTACH,
-+	SFP_E_DEV_DETACH,
- 	SFP_E_DEV_DOWN,
- 	SFP_E_DEV_UP,
- 	SFP_E_TX_FAULT,
-@@ -50,7 +52,8 @@ enum {
- 	SFP_MOD_PRESENT,
- 	SFP_MOD_ERROR,
- 
--	SFP_DEV_DOWN = 0,
-+	SFP_DEV_DETACHED = 0,
-+	SFP_DEV_DOWN,
- 	SFP_DEV_UP,
- 
- 	SFP_S_DOWN = 0,
-@@ -80,6 +83,7 @@ static const char *mod_state_to_str(unsi
- }
- 
- static const char * const dev_state_strings[] = {
-+	[SFP_DEV_DETACHED] = "detached",
- 	[SFP_DEV_DOWN] = "down",
- 	[SFP_DEV_UP] = "up",
- };
-@@ -94,6 +98,8 @@ static const char *dev_state_to_str(unsi
- static const char * const event_strings[] = {
- 	[SFP_E_INSERT] = "insert",
- 	[SFP_E_REMOVE] = "remove",
-+	[SFP_E_DEV_ATTACH] = "dev_attach",
-+	[SFP_E_DEV_DETACH] = "dev_detach",
- 	[SFP_E_DEV_DOWN] = "dev_down",
- 	[SFP_E_DEV_UP] = "dev_up",
- 	[SFP_E_TX_FAULT] = "tx_fault",
-@@ -188,7 +194,6 @@ struct sfp {
- 	struct gpio_desc *gpio[GPIO_MAX];
- 	int gpio_irq[GPIO_MAX];
- 
--	bool attached;
- 	struct mutex st_mutex;			/* Protects state */
- 	unsigned int state;
- 	struct delayed_work poll;
-@@ -1559,17 +1564,26 @@ static void sfp_sm_mod_remove(struct sfp
- 	dev_info(sfp->dev, "module removed\n");
- }
- 
--/* This state machine tracks the netdev up/down state */
-+/* This state machine tracks the upstream's state */
- static void sfp_sm_device(struct sfp *sfp, unsigned int event)
- {
- 	switch (sfp->sm_dev_state) {
- 	default:
--		if (event == SFP_E_DEV_UP)
-+		if (event == SFP_E_DEV_ATTACH)
-+			sfp->sm_dev_state = SFP_DEV_DOWN;
-+		break;
-+
-+	case SFP_DEV_DOWN:
-+		if (event == SFP_E_DEV_DETACH)
-+			sfp->sm_dev_state = SFP_DEV_DETACHED;
-+		else if (event == SFP_E_DEV_UP)
- 			sfp->sm_dev_state = SFP_DEV_UP;
- 		break;
- 
- 	case SFP_DEV_UP:
--		if (event == SFP_E_DEV_DOWN)
-+		if (event == SFP_E_DEV_DETACH)
-+			sfp->sm_dev_state = SFP_DEV_DETACHED;
-+		else if (event == SFP_E_DEV_DOWN)
- 			sfp->sm_dev_state = SFP_DEV_DOWN;
- 		break;
- 	}
-@@ -1580,17 +1594,20 @@ static void sfp_sm_device(struct sfp *sf
-  */
- static void sfp_sm_module(struct sfp *sfp, unsigned int event)
- {
--	/* Handle remove event globally, it resets this state machine */
--	if (event == SFP_E_REMOVE) {
-+	/* Handle remove event globally, it resets this state machine.
-+	 * Also deal with upstream detachment.
-+	 */
-+	if (event == SFP_E_REMOVE || sfp->sm_dev_state < SFP_DEV_DOWN) {
- 		if (sfp->sm_mod_state > SFP_MOD_PROBE)
- 			sfp_sm_mod_remove(sfp);
--		sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
-+		if (sfp->sm_mod_state != SFP_MOD_EMPTY)
-+			sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
- 		return;
- 	}
- 
- 	switch (sfp->sm_mod_state) {
- 	default:
--		if (event == SFP_E_INSERT && sfp->attached)
-+		if (event == SFP_E_INSERT)
- 			sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL);
- 		break;
- 
-@@ -1756,8 +1773,8 @@ static void sfp_sm_event(struct sfp *sfp
- 		sm_state_to_str(sfp->sm_state),
- 		event_to_str(event));
- 
--	sfp_sm_module(sfp, event);
- 	sfp_sm_device(sfp, event);
-+	sfp_sm_module(sfp, event);
- 	sfp_sm_main(sfp, event);
- 
- 	dev_dbg(sfp->dev, "SM: exit %s:%s:%s\n",
-@@ -1770,15 +1787,14 @@ static void sfp_sm_event(struct sfp *sfp
- 
- static void sfp_attach(struct sfp *sfp)
- {
--	sfp->attached = true;
-+	sfp_sm_event(sfp, SFP_E_DEV_ATTACH);
- 	if (sfp->state & SFP_F_PRESENT)
- 		sfp_sm_event(sfp, SFP_E_INSERT);
- }
- 
- static void sfp_detach(struct sfp *sfp)
- {
--	sfp->attached = false;
--	sfp_sm_event(sfp, SFP_E_REMOVE);
-+	sfp_sm_event(sfp, SFP_E_DEV_DETACH);
- }
- 
- static void sfp_start(struct sfp *sfp)
diff --git a/target/linux/generic/backport-5.4/733-v5.5-net-sfp-split-power-mode-switching-from-probe.patch b/target/linux/generic/backport-5.4/733-v5.5-net-sfp-split-power-mode-switching-from-probe.patch
deleted file mode 100644
index f645e44191..0000000000
--- a/target/linux/generic/backport-5.4/733-v5.5-net-sfp-split-power-mode-switching-from-probe.patch
+++ /dev/null
@@ -1,184 +0,0 @@
-From fdff863a4ce3677907f64396e34c45025abb6600 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 5 Nov 2019 12:59:36 +0000
-Subject: [PATCH 631/660] net: sfp: split power mode switching from probe
-
-Switch the power mode switching from the probe, so that we don't
-repeatedly re-probe the SFP device if there is a problem accessing
-the registers at I2C address 0x51.
-
-In splitting this out, we can also fix a bug where we leave the module
-in high-power mode when the upstream device is detached but the module
-is still inserted.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 101 ++++++++++++++++++++++++++----------------
- 1 file changed, 64 insertions(+), 37 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -49,6 +49,7 @@ enum {
- 	SFP_MOD_EMPTY = 0,
- 	SFP_MOD_PROBE,
- 	SFP_MOD_HPOWER,
-+	SFP_MOD_WAITPWR,
- 	SFP_MOD_PRESENT,
- 	SFP_MOD_ERROR,
- 
-@@ -71,6 +72,7 @@ static const char  * const mod_state_str
- 	[SFP_MOD_EMPTY] = "empty",
- 	[SFP_MOD_PROBE] = "probe",
- 	[SFP_MOD_HPOWER] = "hpower",
-+	[SFP_MOD_WAITPWR] = "waitpwr",
- 	[SFP_MOD_PRESENT] = "present",
- 	[SFP_MOD_ERROR] = "error",
- };
-@@ -1423,37 +1425,34 @@ static int sfp_module_parse_power(struct
- 	return 0;
- }
- 
--static int sfp_sm_mod_hpower(struct sfp *sfp)
-+static int sfp_sm_mod_hpower(struct sfp *sfp, bool enable)
- {
- 	u8 val;
- 	int err;
- 
--	if (sfp->module_power_mW <= 1000)
--		return 0;
--
- 	err = sfp_read(sfp, true, SFP_EXT_STATUS, &val, sizeof(val));
- 	if (err != sizeof(val)) {
- 		dev_err(sfp->dev, "Failed to read EEPROM: %d\n", err);
--		err = -EAGAIN;
--		goto err;
-+		return -EAGAIN;
- 	}
- 
--	val |= BIT(0);
-+	if (enable)
-+		val |= BIT(0);
-+	else
-+		val &= ~BIT(0);
- 
- 	err = sfp_write(sfp, true, SFP_EXT_STATUS, &val, sizeof(val));
- 	if (err != sizeof(val)) {
- 		dev_err(sfp->dev, "Failed to write EEPROM: %d\n", err);
--		err = -EAGAIN;
--		goto err;
-+		return -EAGAIN;
- 	}
- 
--	dev_info(sfp->dev, "Module switched to %u.%uW power level\n",
--		 sfp->module_power_mW / 1000,
--		 (sfp->module_power_mW / 100) % 10);
--	return T_HPOWER_LEVEL;
-+	if (enable)
-+		dev_info(sfp->dev, "Module switched to %u.%uW power level\n",
-+			 sfp->module_power_mW / 1000,
-+			 (sfp->module_power_mW / 100) % 10);
- 
--err:
--	return err;
-+	return 0;
- }
- 
- static int sfp_sm_mod_probe(struct sfp *sfp)
-@@ -1549,7 +1548,7 @@ static int sfp_sm_mod_probe(struct sfp *
- 	if (ret < 0)
- 		return ret;
- 
--	return sfp_sm_mod_hpower(sfp);
-+	return 0;
- }
- 
- static void sfp_sm_mod_remove(struct sfp *sfp)
-@@ -1594,13 +1593,22 @@ static void sfp_sm_device(struct sfp *sf
-  */
- static void sfp_sm_module(struct sfp *sfp, unsigned int event)
- {
--	/* Handle remove event globally, it resets this state machine.
--	 * Also deal with upstream detachment.
--	 */
--	if (event == SFP_E_REMOVE || sfp->sm_dev_state < SFP_DEV_DOWN) {
-+	int err;
-+
-+	/* Handle remove event globally, it resets this state machine */
-+	if (event == SFP_E_REMOVE) {
- 		if (sfp->sm_mod_state > SFP_MOD_PROBE)
- 			sfp_sm_mod_remove(sfp);
--		if (sfp->sm_mod_state != SFP_MOD_EMPTY)
-+		sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
-+		return;
-+	}
-+
-+	/* Handle device detach globally */
-+	if (sfp->sm_dev_state < SFP_DEV_DOWN) {
-+		if (sfp->module_power_mW > 1000 &&
-+		    sfp->sm_mod_state > SFP_MOD_HPOWER)
-+			sfp_sm_mod_hpower(sfp, false);
-+		if (sfp->sm_mod_state > SFP_MOD_EMPTY)
- 			sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
- 		return;
- 	}
-@@ -1612,26 +1620,45 @@ static void sfp_sm_module(struct sfp *sf
- 		break;
- 
- 	case SFP_MOD_PROBE:
--		if (event == SFP_E_TIMEOUT) {
--			int val = sfp_sm_mod_probe(sfp);
-+		if (event != SFP_E_TIMEOUT)
-+			break;
- 
--			if (val == 0)
--				sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
--			else if (val > 0)
--				sfp_sm_mod_next(sfp, SFP_MOD_HPOWER, val);
--			else if (val != -EAGAIN)
--				sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
--			else
--				sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+		err = sfp_sm_mod_probe(sfp);
-+		if (err == -EAGAIN) {
-+			sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+			break;
- 		}
--		break;
-+		if (err < 0) {
-+			sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
-+			break;
-+		}
-+
-+		/* If this is a power level 1 module, we are done */
-+		if (sfp->module_power_mW <= 1000)
-+			goto insert;
- 
-+		sfp_sm_mod_next(sfp, SFP_MOD_HPOWER, 0);
-+		/* fall through */
- 	case SFP_MOD_HPOWER:
--		if (event == SFP_E_TIMEOUT) {
--			sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
-+		/* Enable high power mode */
-+		err = sfp_sm_mod_hpower(sfp, true);
-+		if (err == 0)
-+			sfp_sm_mod_next(sfp, SFP_MOD_WAITPWR, T_HPOWER_LEVEL);
-+		else if (err != -EAGAIN)
-+			sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
-+		else
-+			sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+		break;
-+
-+	case SFP_MOD_WAITPWR:
-+		/* Wait for T_HPOWER_LEVEL to time out */
-+		if (event != SFP_E_TIMEOUT)
- 			break;
--		}
--		/* fallthrough */
-+
-+	insert:
-+		sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
-+		break;
-+
- 	case SFP_MOD_PRESENT:
- 	case SFP_MOD_ERROR:
- 		break;
diff --git a/target/linux/generic/backport-5.4/734-v5.5-net-sfp-move-module-insert-reporting-out-of-probe.patch b/target/linux/generic/backport-5.4/734-v5.5-net-sfp-move-module-insert-reporting-out-of-probe.patch
deleted file mode 100644
index e49bde27e3..0000000000
--- a/target/linux/generic/backport-5.4/734-v5.5-net-sfp-move-module-insert-reporting-out-of-probe.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-From 57cbf7453551db1df619b79410d79fc418d862d5 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 5 Nov 2019 13:00:45 +0000
-Subject: [PATCH 632/660] net: sfp: move module insert reporting out of probe
-
-Move the module insertion reporting out of the probe handling, but
-after we have detected that the upstream has attached (since that is
-whom we are reporting insertion to.)
-
-Only report module removal if we had previously reported a module
-insertion.
-
-This gives cleaner semantics, and means we can probe the module before
-we have an upstream attached.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 58 +++++++++++++++++++++++++++++--------------
- 1 file changed, 40 insertions(+), 18 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -47,11 +47,12 @@ enum {
- 	SFP_E_TIMEOUT,
- 
- 	SFP_MOD_EMPTY = 0,
-+	SFP_MOD_ERROR,
- 	SFP_MOD_PROBE,
-+	SFP_MOD_WAITDEV,
- 	SFP_MOD_HPOWER,
- 	SFP_MOD_WAITPWR,
- 	SFP_MOD_PRESENT,
--	SFP_MOD_ERROR,
- 
- 	SFP_DEV_DETACHED = 0,
- 	SFP_DEV_DOWN,
-@@ -70,11 +71,12 @@ enum {
- 
- static const char  * const mod_state_strings[] = {
- 	[SFP_MOD_EMPTY] = "empty",
-+	[SFP_MOD_ERROR] = "error",
- 	[SFP_MOD_PROBE] = "probe",
-+	[SFP_MOD_WAITDEV] = "waitdev",
- 	[SFP_MOD_HPOWER] = "hpower",
- 	[SFP_MOD_WAITPWR] = "waitpwr",
- 	[SFP_MOD_PRESENT] = "present",
--	[SFP_MOD_ERROR] = "error",
- };
- 
- static const char *mod_state_to_str(unsigned short mod_state)
-@@ -1544,16 +1546,13 @@ static int sfp_sm_mod_probe(struct sfp *
- 	if (ret < 0)
- 		return ret;
- 
--	ret = sfp_module_insert(sfp->sfp_bus, &sfp->id);
--	if (ret < 0)
--		return ret;
--
- 	return 0;
- }
- 
- static void sfp_sm_mod_remove(struct sfp *sfp)
- {
--	sfp_module_remove(sfp->sfp_bus);
-+	if (sfp->sm_mod_state > SFP_MOD_WAITDEV)
-+		sfp_module_remove(sfp->sfp_bus);
- 
- 	sfp_hwmon_remove(sfp);
- 
-@@ -1604,12 +1603,12 @@ static void sfp_sm_module(struct sfp *sf
- 	}
- 
- 	/* Handle device detach globally */
--	if (sfp->sm_dev_state < SFP_DEV_DOWN) {
-+	if (sfp->sm_dev_state < SFP_DEV_DOWN &&
-+	    sfp->sm_mod_state > SFP_MOD_WAITDEV) {
- 		if (sfp->module_power_mW > 1000 &&
- 		    sfp->sm_mod_state > SFP_MOD_HPOWER)
- 			sfp_sm_mod_hpower(sfp, false);
--		if (sfp->sm_mod_state > SFP_MOD_EMPTY)
--			sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
-+		sfp_sm_mod_next(sfp, SFP_MOD_WAITDEV, 0);
- 		return;
- 	}
- 
-@@ -1620,6 +1619,7 @@ static void sfp_sm_module(struct sfp *sf
- 		break;
- 
- 	case SFP_MOD_PROBE:
-+		/* Wait for T_PROBE_INIT to time out */
- 		if (event != SFP_E_TIMEOUT)
- 			break;
- 
-@@ -1633,6 +1633,20 @@ static void sfp_sm_module(struct sfp *sf
- 			break;
- 		}
- 
-+		sfp_sm_mod_next(sfp, SFP_MOD_WAITDEV, 0);
-+		/* fall through */
-+	case SFP_MOD_WAITDEV:
-+		/* Ensure that the device is attached before proceeding */
-+		if (sfp->sm_dev_state < SFP_DEV_DOWN)
-+			break;
-+
-+		/* Report the module insertion to the upstream device */
-+		err = sfp_module_insert(sfp->sfp_bus, &sfp->id);
-+		if (err < 0) {
-+			sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
-+			break;
-+		}
-+
- 		/* If this is a power level 1 module, we are done */
- 		if (sfp->module_power_mW <= 1000)
- 			goto insert;
-@@ -1642,12 +1656,17 @@ static void sfp_sm_module(struct sfp *sf
- 	case SFP_MOD_HPOWER:
- 		/* Enable high power mode */
- 		err = sfp_sm_mod_hpower(sfp, true);
--		if (err == 0)
--			sfp_sm_mod_next(sfp, SFP_MOD_WAITPWR, T_HPOWER_LEVEL);
--		else if (err != -EAGAIN)
--			sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
--		else
--			sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+		if (err < 0) {
-+			if (err != -EAGAIN) {
-+				sfp_module_remove(sfp->sfp_bus);
-+				sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
-+			} else {
-+				sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+			}
-+			break;
-+		}
-+
-+		sfp_sm_mod_next(sfp, SFP_MOD_WAITPWR, T_HPOWER_LEVEL);
- 		break;
- 
- 	case SFP_MOD_WAITPWR:
-@@ -1815,8 +1834,6 @@ static void sfp_sm_event(struct sfp *sfp
- static void sfp_attach(struct sfp *sfp)
- {
- 	sfp_sm_event(sfp, SFP_E_DEV_ATTACH);
--	if (sfp->state & SFP_F_PRESENT)
--		sfp_sm_event(sfp, SFP_E_INSERT);
- }
- 
- static void sfp_detach(struct sfp *sfp)
-@@ -2084,6 +2101,11 @@ static int sfp_probe(struct platform_dev
- 		sfp->state |= SFP_F_RATE_SELECT;
- 	sfp_set_state(sfp, sfp->state);
- 	sfp_module_tx_disable(sfp);
-+	if (sfp->state & SFP_F_PRESENT) {
-+		rtnl_lock();
-+		sfp_sm_event(sfp, SFP_E_INSERT);
-+		rtnl_unlock();
-+	}
- 
- 	for (i = 0; i < GPIO_MAX; i++) {
- 		if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i])
diff --git a/target/linux/generic/backport-5.4/735-v5.5-net-sfp-allow-sfp-to-probe-slow-to-initialise-GPON-m.patch b/target/linux/generic/backport-5.4/735-v5.5-net-sfp-allow-sfp-to-probe-slow-to-initialise-GPON-m.patch
deleted file mode 100644
index ab1ae753d7..0000000000
--- a/target/linux/generic/backport-5.4/735-v5.5-net-sfp-allow-sfp-to-probe-slow-to-initialise-GPON-m.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From fb56cd08880aff8fb030e684fa4311bef712a499 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 5 Nov 2019 13:02:30 +0000
-Subject: [PATCH 633/660] net: sfp: allow sfp to probe slow to initialise GPON
- modules
-
-Some GPON modules (e.g. Huawei MA5671A) take a significant amount of
-time to start responding on the I2C bus, contary to the SFF
-specifications.
-
-Work around this by implementing a two-level timeout strategy, where
-we initially quickly retry for the module, and then use a slower retry
-after we exceed a maximum number of quick attempts.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 38 ++++++++++++++++++++++++++++----------
- 1 file changed, 28 insertions(+), 10 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -167,9 +167,12 @@ static const enum gpiod_flags gpio_flags
-  * The SFF-8472 specifies t_serial ("Time from power on until module is
-  * ready for data transmission over the two wire serial bus.") as 300ms.
-  */
--#define T_SERIAL	msecs_to_jiffies(300)
--#define T_HPOWER_LEVEL	msecs_to_jiffies(300)
--#define T_PROBE_RETRY	msecs_to_jiffies(100)
-+#define T_SERIAL		msecs_to_jiffies(300)
-+#define T_HPOWER_LEVEL		msecs_to_jiffies(300)
-+#define T_PROBE_RETRY_INIT	msecs_to_jiffies(100)
-+#define R_PROBE_RETRY_INIT	10
-+#define T_PROBE_RETRY_SLOW	msecs_to_jiffies(5000)
-+#define R_PROBE_RETRY_SLOW	12
- 
- /* SFP modules appear to always have their PHY configured for bus address
-  * 0x56 (which with mdio-i2c, translates to a PHY address of 22).
-@@ -204,6 +207,8 @@ struct sfp {
- 	struct delayed_work timeout;
- 	struct mutex sm_mutex;			/* Protects state machine */
- 	unsigned char sm_mod_state;
-+	unsigned char sm_mod_tries_init;
-+	unsigned char sm_mod_tries;
- 	unsigned char sm_dev_state;
- 	unsigned short sm_state;
- 	unsigned int sm_retries;
-@@ -1457,7 +1462,7 @@ static int sfp_sm_mod_hpower(struct sfp
- 	return 0;
- }
- 
--static int sfp_sm_mod_probe(struct sfp *sfp)
-+static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
- {
- 	/* SFP module inserted - read I2C data */
- 	struct sfp_eeprom_id id;
-@@ -1467,7 +1472,8 @@ static int sfp_sm_mod_probe(struct sfp *
- 
- 	ret = sfp_read(sfp, false, 0, &id, sizeof(id));
- 	if (ret < 0) {
--		dev_err(sfp->dev, "failed to read EEPROM: %d\n", ret);
-+		if (report)
-+			dev_err(sfp->dev, "failed to read EEPROM: %d\n", ret);
- 		return -EAGAIN;
- 	}
- 
-@@ -1614,8 +1620,11 @@ static void sfp_sm_module(struct sfp *sf
- 
- 	switch (sfp->sm_mod_state) {
- 	default:
--		if (event == SFP_E_INSERT)
-+		if (event == SFP_E_INSERT) {
- 			sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL);
-+			sfp->sm_mod_tries_init = R_PROBE_RETRY_INIT;
-+			sfp->sm_mod_tries = R_PROBE_RETRY_SLOW;
-+		}
- 		break;
- 
- 	case SFP_MOD_PROBE:
-@@ -1623,10 +1632,19 @@ static void sfp_sm_module(struct sfp *sf
- 		if (event != SFP_E_TIMEOUT)
- 			break;
- 
--		err = sfp_sm_mod_probe(sfp);
-+		err = sfp_sm_mod_probe(sfp, sfp->sm_mod_tries == 1);
- 		if (err == -EAGAIN) {
--			sfp_sm_set_timer(sfp, T_PROBE_RETRY);
--			break;
-+			if (sfp->sm_mod_tries_init &&
-+			   --sfp->sm_mod_tries_init) {
-+				sfp_sm_set_timer(sfp, T_PROBE_RETRY_INIT);
-+				break;
-+			} else if (sfp->sm_mod_tries && --sfp->sm_mod_tries) {
-+				if (sfp->sm_mod_tries == R_PROBE_RETRY_SLOW - 1)
-+					dev_warn(sfp->dev,
-+						 "please wait, module slow to respond\n");
-+				sfp_sm_set_timer(sfp, T_PROBE_RETRY_SLOW);
-+				break;
-+			}
- 		}
- 		if (err < 0) {
- 			sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
-@@ -1661,7 +1679,7 @@ static void sfp_sm_module(struct sfp *sf
- 				sfp_module_remove(sfp->sfp_bus);
- 				sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
- 			} else {
--				sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+				sfp_sm_set_timer(sfp, T_PROBE_RETRY_INIT);
- 			}
- 			break;
- 		}
diff --git a/target/linux/generic/backport-5.4/736-v5.5-net-sfp-allow-modules-with-slow-diagnostics-to-probe.patch b/target/linux/generic/backport-5.4/736-v5.5-net-sfp-allow-modules-with-slow-diagnostics-to-probe.patch
deleted file mode 100644
index e6c1fd71d8..0000000000
--- a/target/linux/generic/backport-5.4/736-v5.5-net-sfp-allow-modules-with-slow-diagnostics-to-probe.patch
+++ /dev/null
@@ -1,198 +0,0 @@
-From 559391fc20fae506adcb311b904cc544c76436c0 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 7 Nov 2019 18:52:07 +0000
-Subject: [PATCH 634/660] net: sfp: allow modules with slow diagnostics to
- probe
-
-When a module is inserted, we attempt to read read the ID from address
-0x50.  Once we are able to read the ID, we immediately attempt to
-initialise the hwmon support by reading from address 0x51.  If this
-fails, then we fall into error state, and assume that the module is
-not usable.
-
-Modules such as the ALCATELLUCENT 3FE46541AA use a real EEPROM for
-I2C address 0x50, which responds immediately.  However, address 0x51
-is an emulated, which only becomes available once the on-board firmware
-has booted.  This prompts us to fall into the error state.
-
-Since the module may be usable without diagnostics, arrange for the
-hwmon probe independent of the rest of the SFP itself, retrying every
-5s for up to about 60s for the monitoring to become available, and
-print an error message if it doesn't become available.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 96 +++++++++++++++++++++++++++++++++----------
- 1 file changed, 74 insertions(+), 22 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -218,6 +218,8 @@ struct sfp {
- 
- #if IS_ENABLED(CONFIG_HWMON)
- 	struct sfp_diag diag;
-+	struct delayed_work hwmon_probe;
-+	unsigned int hwmon_tries;
- 	struct device *hwmon_dev;
- 	char *hwmon_name;
- #endif
-@@ -1159,29 +1161,27 @@ static const struct hwmon_chip_info sfp_
- 	.info = sfp_hwmon_info,
- };
- 
--static int sfp_hwmon_insert(struct sfp *sfp)
-+static void sfp_hwmon_probe(struct work_struct *work)
- {
-+	struct sfp *sfp = container_of(work, struct sfp, hwmon_probe.work);
- 	int err, i;
- 
--	if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE)
--		return 0;
--
--	if (!(sfp->id.ext.diagmon & SFP_DIAGMON_DDM))
--		return 0;
--
--	if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE)
--		/* This driver in general does not support address
--		 * change.
--		 */
--		return 0;
--
- 	err = sfp_read(sfp, true, 0, &sfp->diag, sizeof(sfp->diag));
--	if (err < 0)
--		return err;
-+	if (err < 0) {
-+		if (sfp->hwmon_tries--) {
-+			mod_delayed_work(system_wq, &sfp->hwmon_probe,
-+					 T_PROBE_RETRY_SLOW);
-+		} else {
-+			dev_warn(sfp->dev, "hwmon probe failed: %d\n", err);
-+		}
-+		return;
-+	}
- 
- 	sfp->hwmon_name = kstrdup(dev_name(sfp->dev), GFP_KERNEL);
--	if (!sfp->hwmon_name)
--		return -ENODEV;
-+	if (!sfp->hwmon_name) {
-+		dev_err(sfp->dev, "out of memory for hwmon name\n");
-+		return;
-+	}
- 
- 	for (i = 0; sfp->hwmon_name[i]; i++)
- 		if (hwmon_is_bad_char(sfp->hwmon_name[i]))
-@@ -1191,18 +1191,52 @@ static int sfp_hwmon_insert(struct sfp *
- 							 sfp->hwmon_name, sfp,
- 							 &sfp_hwmon_chip_info,
- 							 NULL);
-+	if (IS_ERR(sfp->hwmon_dev))
-+		dev_err(sfp->dev, "failed to register hwmon device: %ld\n",
-+			PTR_ERR(sfp->hwmon_dev));
-+}
-+
-+static int sfp_hwmon_insert(struct sfp *sfp)
-+{
-+	if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE)
-+		return 0;
-+
-+	if (!(sfp->id.ext.diagmon & SFP_DIAGMON_DDM))
-+		return 0;
-+
-+	if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE)
-+		/* This driver in general does not support address
-+		 * change.
-+		 */
-+		return 0;
-+
-+	mod_delayed_work(system_wq, &sfp->hwmon_probe, 1);
-+	sfp->hwmon_tries = R_PROBE_RETRY_SLOW;
- 
--	return PTR_ERR_OR_ZERO(sfp->hwmon_dev);
-+	return 0;
- }
- 
- static void sfp_hwmon_remove(struct sfp *sfp)
- {
-+	cancel_delayed_work_sync(&sfp->hwmon_probe);
- 	if (!IS_ERR_OR_NULL(sfp->hwmon_dev)) {
- 		hwmon_device_unregister(sfp->hwmon_dev);
- 		sfp->hwmon_dev = NULL;
- 		kfree(sfp->hwmon_name);
- 	}
- }
-+
-+static int sfp_hwmon_init(struct sfp *sfp)
-+{
-+	INIT_DELAYED_WORK(&sfp->hwmon_probe, sfp_hwmon_probe);
-+
-+	return 0;
-+}
-+
-+static void sfp_hwmon_exit(struct sfp *sfp)
-+{
-+	cancel_delayed_work_sync(&sfp->hwmon_probe);
-+}
- #else
- static int sfp_hwmon_insert(struct sfp *sfp)
- {
-@@ -1212,6 +1246,15 @@ static int sfp_hwmon_insert(struct sfp *
- static void sfp_hwmon_remove(struct sfp *sfp)
- {
- }
-+
-+static int sfp_hwmon_init(struct sfp *sfp)
-+{
-+	return 0;
-+}
-+
-+static void sfp_hwmon_exit(struct sfp *sfp)
-+{
-+}
- #endif
- 
- /* Helpers */
-@@ -1548,10 +1591,6 @@ static int sfp_sm_mod_probe(struct sfp *
- 	if (ret < 0)
- 		return ret;
- 
--	ret = sfp_hwmon_insert(sfp);
--	if (ret < 0)
--		return ret;
--
- 	return 0;
- }
- 
-@@ -1700,6 +1739,15 @@ static void sfp_sm_module(struct sfp *sf
- 	case SFP_MOD_ERROR:
- 		break;
- 	}
-+
-+#if IS_ENABLED(CONFIG_HWMON)
-+	if (sfp->sm_mod_state >= SFP_MOD_WAITDEV &&
-+	    IS_ERR_OR_NULL(sfp->hwmon_dev)) {
-+		err = sfp_hwmon_insert(sfp);
-+		if (err)
-+			dev_warn(sfp->dev, "hwmon probe failed: %d\n", err);
-+	}
-+#endif
- }
- 
- static void sfp_sm_main(struct sfp *sfp, unsigned int event)
-@@ -2001,6 +2049,8 @@ static struct sfp *sfp_alloc(struct devi
- 	INIT_DELAYED_WORK(&sfp->poll, sfp_poll);
- 	INIT_DELAYED_WORK(&sfp->timeout, sfp_timeout);
- 
-+	sfp_hwmon_init(sfp);
-+
- 	return sfp;
- }
- 
-@@ -2008,6 +2058,8 @@ static void sfp_cleanup(void *data)
- {
- 	struct sfp *sfp = data;
- 
-+	sfp_hwmon_exit(sfp);
-+
- 	cancel_delayed_work_sync(&sfp->poll);
- 	cancel_delayed_work_sync(&sfp->timeout);
- 	if (sfp->i2c_mii) {
diff --git a/target/linux/generic/backport-5.4/737-v5.5-net-phy-add-core-phylib-sfp-support.patch b/target/linux/generic/backport-5.4/737-v5.5-net-phy-add-core-phylib-sfp-support.patch
deleted file mode 100644
index edfe151725..0000000000
--- a/target/linux/generic/backport-5.4/737-v5.5-net-phy-add-core-phylib-sfp-support.patch
+++ /dev/null
@@ -1,183 +0,0 @@
-From eb156db588ac583cdae7b91eaac9c0ad3a358e63 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sun, 15 Sep 2019 20:05:34 +0100
-Subject: [PATCH 635/660] net: phy: add core phylib sfp support
-
-Add core phylib help for supporting SFP sockets on PHYs.  This provides
-a mechanism to inform the SFP layer about PHY up/down events, and also
-unregister the SFP bus when the PHY is going away.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phy.c        |  7 ++++
- drivers/net/phy/phy_device.c | 66 ++++++++++++++++++++++++++++++++++++
- include/linux/phy.h          | 11 ++++++
- 3 files changed, 84 insertions(+)
-
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -23,6 +23,7 @@
- #include <linux/ethtool.h>
- #include <linux/phy.h>
- #include <linux/phy_led_triggers.h>
-+#include <linux/sfp.h>
- #include <linux/workqueue.h>
- #include <linux/mdio.h>
- #include <linux/io.h>
-@@ -863,6 +864,9 @@ void phy_stop(struct phy_device *phydev)
- 
- 	mutex_lock(&phydev->lock);
- 
-+	if (phydev->sfp_bus)
-+		sfp_upstream_stop(phydev->sfp_bus);
-+
- 	phydev->state = PHY_HALTED;
- 
- 	mutex_unlock(&phydev->lock);
-@@ -925,6 +929,9 @@ void phy_state_machine(struct work_struc
- 
- 	old_state = phydev->state;
- 
-+	if (phydev->sfp_bus)
-+		sfp_upstream_start(phydev->sfp_bus);
-+
- 	switch (phydev->state) {
- 	case PHY_DOWN:
- 	case PHY_READY:
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -27,6 +27,7 @@
- #include <linux/bitmap.h>
- #include <linux/phy.h>
- #include <linux/phy_led_triggers.h>
-+#include <linux/sfp.h>
- #include <linux/mdio.h>
- #include <linux/io.h>
- #include <linux/uaccess.h>
-@@ -1185,6 +1186,65 @@ phy_standalone_show(struct device *dev,
- static DEVICE_ATTR_RO(phy_standalone);
- 
- /**
-+ * phy_sfp_attach - attach the SFP bus to the PHY upstream network device
-+ * @upstream: pointer to the phy device
-+ * @bus: sfp bus representing cage being attached
-+ *
-+ * This is used to fill in the sfp_upstream_ops .attach member.
-+ */
-+void phy_sfp_attach(void *upstream, struct sfp_bus *bus)
-+{
-+	struct phy_device *phydev = upstream;
-+
-+	if (phydev->attached_dev)
-+		phydev->attached_dev->sfp_bus = bus;
-+	phydev->sfp_bus_attached = true;
-+}
-+EXPORT_SYMBOL(phy_sfp_attach);
-+
-+/**
-+ * phy_sfp_detach - detach the SFP bus from the PHY upstream network device
-+ * @upstream: pointer to the phy device
-+ * @bus: sfp bus representing cage being attached
-+ *
-+ * This is used to fill in the sfp_upstream_ops .detach member.
-+ */
-+void phy_sfp_detach(void *upstream, struct sfp_bus *bus)
-+{
-+	struct phy_device *phydev = upstream;
-+
-+	if (phydev->attached_dev)
-+		phydev->attached_dev->sfp_bus = NULL;
-+	phydev->sfp_bus_attached = false;
-+}
-+EXPORT_SYMBOL(phy_sfp_detach);
-+
-+/**
-+ * phy_sfp_probe - probe for a SFP cage attached to this PHY device
-+ * @phydev: Pointer to phy_device
-+ * @ops: SFP's upstream operations
-+ */
-+int phy_sfp_probe(struct phy_device *phydev,
-+		  const struct sfp_upstream_ops *ops)
-+{
-+	struct sfp_bus *bus;
-+	int ret;
-+
-+	if (phydev->mdio.dev.fwnode) {
-+		bus = sfp_bus_find_fwnode(phydev->mdio.dev.fwnode);
-+		if (IS_ERR(bus))
-+			return PTR_ERR(bus);
-+
-+		phydev->sfp_bus = bus;
-+
-+		ret = sfp_bus_add_upstream(bus, phydev, ops);
-+		sfp_bus_put(bus);
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(phy_sfp_probe);
-+
-+/**
-  * phy_attach_direct - attach a network device to a given PHY device pointer
-  * @dev: network device to attach
-  * @phydev: Pointer to phy_device to attach
-@@ -1261,6 +1321,9 @@ int phy_attach_direct(struct net_device
- 		dev->phydev = phydev;
- 	}
- 
-+	if (phydev->sfp_bus_attached)
-+		dev->sfp_bus = phydev->sfp_bus;
-+
- 	/* Some Ethernet drivers try to connect to a PHY device before
- 	 * calling register_netdevice() -> netdev_register_kobject() and
- 	 * does the dev->dev.kobj initialization. Here we only check for
-@@ -2291,6 +2354,9 @@ static int phy_remove(struct device *dev
- 	phydev->state = PHY_DOWN;
- 	mutex_unlock(&phydev->lock);
- 
-+	sfp_bus_del_upstream(phydev->sfp_bus);
-+	phydev->sfp_bus = NULL;
-+
- 	if (phydev->drv && phydev->drv->remove) {
- 		phydev->drv->remove(phydev);
- 
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -203,6 +203,8 @@ static inline const char *phy_modes(phy_
- 
- struct device;
- struct phylink;
-+struct sfp_bus;
-+struct sfp_upstream_ops;
- struct sk_buff;
- 
- /*
-@@ -343,6 +345,8 @@ struct phy_c45_device_ids {
-  * dev_flags: Device-specific flags used by the PHY driver.
-  * irq: IRQ number of the PHY's interrupt (-1 if none)
-  * phy_timer: The timer for handling the state machine
-+ * sfp_bus_attached: flag indicating whether the SFP bus has been attached
-+ * sfp_bus: SFP bus attached to this PHY's fiber port
-  * attached_dev: The attached enet driver's device instance ptr
-  * adjust_link: Callback for the enet controller to respond to
-  * changes in the link state.
-@@ -434,6 +438,9 @@ struct phy_device {
- 
- 	struct mutex lock;
- 
-+	/* This may be modified under the rtnl lock */
-+	bool sfp_bus_attached;
-+	struct sfp_bus *sfp_bus;
- 	struct phylink *phylink;
- 	struct net_device *attached_dev;
- 
-@@ -1023,6 +1030,10 @@ int phy_suspend(struct phy_device *phyde
- int phy_resume(struct phy_device *phydev);
- int __phy_resume(struct phy_device *phydev);
- int phy_loopback(struct phy_device *phydev, bool enable);
-+void phy_sfp_attach(void *upstream, struct sfp_bus *bus);
-+void phy_sfp_detach(void *upstream, struct sfp_bus *bus);
-+int phy_sfp_probe(struct phy_device *phydev,
-+	          const struct sfp_upstream_ops *ops);
- struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
- 			      phy_interface_t interface);
- struct phy_device *phy_find_first(struct mii_bus *bus);
diff --git a/target/linux/generic/backport-5.4/738-v5.5-net-phy-marvell10g-add-SFP-support.patch b/target/linux/generic/backport-5.4/738-v5.5-net-phy-marvell10g-add-SFP-support.patch
deleted file mode 100644
index 40a666a3f2..0000000000
--- a/target/linux/generic/backport-5.4/738-v5.5-net-phy-marvell10g-add-SFP-support.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 0836d9fb41ed90090ef4af0d7abe784ee7706f80 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 14 Apr 2017 14:21:25 +0100
-Subject: [PATCH 636/660] net: phy: marvell10g: add SFP+ support
-
-Add support for SFP+ cages to the Marvell 10G PHY driver. This is
-slightly complicated by the way phylib works in that we need to use
-a multi-step process to attach the SFP bus, and we also need to track
-the phylink state machine to know when the module's transmit disable
-signal should change state.
-
-With appropriate DT changes, this allows the SFP+ canges on the
-Macchiatobin platform to be functional.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/marvell10g.c | 25 ++++++++++++++++++++++++-
- 1 file changed, 24 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/marvell10g.c
-+++ b/drivers/net/phy/marvell10g.c
-@@ -26,6 +26,7 @@
- #include <linux/hwmon.h>
- #include <linux/marvell_phy.h>
- #include <linux/phy.h>
-+#include <linux/sfp.h>
- 
- #define MV_PHY_ALASKA_NBT_QUIRK_MASK	0xfffffffe
- #define MV_PHY_ALASKA_NBT_QUIRK_REV	(MARVELL_PHY_ID_88X3310 | 0xa)
-@@ -206,6 +207,28 @@ static int mv3310_hwmon_probe(struct phy
- }
- #endif
- 
-+static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
-+{
-+	struct phy_device *phydev = upstream;
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
-+	phy_interface_t iface;
-+
-+	sfp_parse_support(phydev->sfp_bus, id, support);
-+	iface = sfp_select_interface(phydev->sfp_bus, id, support);
-+
-+	if (iface != PHY_INTERFACE_MODE_10GKR) {
-+		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
-+		return -EINVAL;
-+	}
-+	return 0;
-+}
-+
-+static const struct sfp_upstream_ops mv3310_sfp_ops = {
-+	.attach = phy_sfp_attach,
-+	.detach = phy_sfp_detach,
-+	.module_insert = mv3310_sfp_insert,
-+};
-+
- static int mv3310_probe(struct phy_device *phydev)
- {
- 	struct mv3310_priv *priv;
-@@ -236,7 +259,7 @@ static int mv3310_probe(struct phy_devic
- 	if (ret)
- 		return ret;
- 
--	return 0;
-+	return phy_sfp_probe(phydev, &mv3310_sfp_ops);
- }
- 
- static int mv3310_suspend(struct phy_device *phydev)
diff --git a/target/linux/generic/backport-5.4/739-v5.5-net-phylink-update-to-use-phy_support_asym_pause.patch b/target/linux/generic/backport-5.4/739-v5.5-net-phylink-update-to-use-phy_support_asym_pause.patch
deleted file mode 100644
index 84a8214ca5..0000000000
--- a/target/linux/generic/backport-5.4/739-v5.5-net-phylink-update-to-use-phy_support_asym_pause.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 09d7d8395ec61fba4392b35baa6f71c4e36489df Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 8 Nov 2019 15:18:02 +0000
-Subject: [PATCH 637/660] net: phylink: update to use phy_support_asym_pause()
-
-Use phy_support_asym_pause() rather than open-coding it.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 17 +++++++----------
- 1 file changed, 7 insertions(+), 10 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -718,11 +718,6 @@ static int phylink_bringup_phy(struct ph
- 	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
- 	int ret;
- 
--	memset(&config, 0, sizeof(config));
--	linkmode_copy(supported, phy->supported);
--	linkmode_copy(config.advertising, phy->advertising);
--	config.interface = pl->link_config.interface;
--
- 	/*
- 	 * This is the new way of dealing with flow control for PHYs,
- 	 * as described by Timur Tabi in commit 529ed1275263 ("net: phy:
-@@ -730,10 +725,12 @@ static int phylink_bringup_phy(struct ph
- 	 * using our validate call to the MAC, we rely upon the MAC
- 	 * clearing the bits from both supported and advertising fields.
- 	 */
--	if (phylink_test(supported, Pause))
--		phylink_set(config.advertising, Pause);
--	if (phylink_test(supported, Asym_Pause))
--		phylink_set(config.advertising, Asym_Pause);
-+	phy_support_asym_pause(phy);
-+
-+	memset(&config, 0, sizeof(config));
-+	linkmode_copy(supported, phy->supported);
-+	linkmode_copy(config.advertising, phy->advertising);
-+	config.interface = pl->link_config.interface;
- 
- 	ret = phylink_validate(pl, supported, &config);
- 	if (ret)
diff --git a/target/linux/generic/backport-5.4/744-v5.5-net-sfp-soft-status-and-control-support.patch b/target/linux/generic/backport-5.4/744-v5.5-net-sfp-soft-status-and-control-support.patch
deleted file mode 100644
index abc9f65f09..0000000000
--- a/target/linux/generic/backport-5.4/744-v5.5-net-sfp-soft-status-and-control-support.patch
+++ /dev/null
@@ -1,225 +0,0 @@
-From 40e0b3b15f7da92e6b065292b14af7b9bfb1c6e0 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 13 Sep 2019 23:00:35 +0100
-Subject: [PATCH 642/660] net: sfp: soft status and control support
-
-Add support for the soft status and control register, which allows
-TX_FAULT and RX_LOS to be monitored and TX_DISABLE to be set.  We
-make use of this when the board does not support GPIOs for these
-signals.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 110 ++++++++++++++++++++++++++++++++++--------
- include/linux/sfp.h   |   4 ++
- 2 files changed, 94 insertions(+), 20 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -201,7 +201,10 @@ struct sfp {
- 	struct gpio_desc *gpio[GPIO_MAX];
- 	int gpio_irq[GPIO_MAX];
- 
-+	bool need_poll;
-+
- 	struct mutex st_mutex;			/* Protects state */
-+	unsigned int state_soft_mask;
- 	unsigned int state;
- 	struct delayed_work poll;
- 	struct delayed_work timeout;
-@@ -395,24 +398,90 @@ static int sfp_i2c_configure(struct sfp
- }
- 
- /* Interface */
--static unsigned int sfp_get_state(struct sfp *sfp)
-+static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
- {
--	return sfp->get_state(sfp);
-+	return sfp->read(sfp, a2, addr, buf, len);
- }
- 
--static void sfp_set_state(struct sfp *sfp, unsigned int state)
-+static int sfp_write(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
- {
--	sfp->set_state(sfp, state);
-+	return sfp->write(sfp, a2, addr, buf, len);
- }
- 
--static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
-+static unsigned int sfp_soft_get_state(struct sfp *sfp)
- {
--	return sfp->read(sfp, a2, addr, buf, len);
-+	unsigned int state = 0;
-+	u8 status;
-+
-+	if (sfp_read(sfp, true, SFP_STATUS, &status, sizeof(status)) ==
-+		     sizeof(status)) {
-+		if (status & SFP_STATUS_RX_LOS)
-+			state |= SFP_F_LOS;
-+		if (status & SFP_STATUS_TX_FAULT)
-+			state |= SFP_F_TX_FAULT;
-+	}
-+
-+	return state & sfp->state_soft_mask;
- }
- 
--static int sfp_write(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
-+static void sfp_soft_set_state(struct sfp *sfp, unsigned int state)
- {
--	return sfp->write(sfp, a2, addr, buf, len);
-+	u8 status;
-+
-+	if (sfp_read(sfp, true, SFP_STATUS, &status, sizeof(status)) ==
-+		     sizeof(status)) {
-+		if (state & SFP_F_TX_DISABLE)
-+			status |= SFP_STATUS_TX_DISABLE_FORCE;
-+		else
-+			status &= ~SFP_STATUS_TX_DISABLE_FORCE;
-+
-+		sfp_write(sfp, true, SFP_STATUS, &status, sizeof(status));
-+	}
-+}
-+
-+static void sfp_soft_start_poll(struct sfp *sfp)
-+{
-+	const struct sfp_eeprom_id *id = &sfp->id;
-+
-+	sfp->state_soft_mask = 0;
-+	if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_DISABLE &&
-+	    !sfp->gpio[GPIO_TX_DISABLE])
-+		sfp->state_soft_mask |= SFP_F_TX_DISABLE;
-+	if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_FAULT &&
-+	    !sfp->gpio[GPIO_TX_FAULT])
-+		sfp->state_soft_mask |= SFP_F_TX_FAULT;
-+	if (id->ext.enhopts & SFP_ENHOPTS_SOFT_RX_LOS &&
-+	    !sfp->gpio[GPIO_LOS])
-+		sfp->state_soft_mask |= SFP_F_LOS;
-+
-+	if (sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT) &&
-+	    !sfp->need_poll)
-+		mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
-+}
-+
-+static void sfp_soft_stop_poll(struct sfp *sfp)
-+{
-+	sfp->state_soft_mask = 0;
-+}
-+
-+static unsigned int sfp_get_state(struct sfp *sfp)
-+{
-+	unsigned int state = sfp->get_state(sfp);
-+
-+	if (state & SFP_F_PRESENT &&
-+	    sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT))
-+		state |= sfp_soft_get_state(sfp);
-+
-+	return state;
-+}
-+
-+static void sfp_set_state(struct sfp *sfp, unsigned int state)
-+{
-+	sfp->set_state(sfp, state);
-+
-+	if (state & SFP_F_PRESENT &&
-+	    sfp->state_soft_mask & SFP_F_TX_DISABLE)
-+		sfp_soft_set_state(sfp, state);
- }
- 
- static unsigned int sfp_check(void *buf, size_t len)
-@@ -1407,11 +1476,6 @@ static void sfp_sm_fault(struct sfp *sfp
- 	}
- }
- 
--static void sfp_sm_mod_init(struct sfp *sfp)
--{
--	sfp_module_tx_enable(sfp);
--}
--
- static void sfp_sm_probe_for_phy(struct sfp *sfp)
- {
- 	/* Setting the serdes link mode is guesswork: there's no
-@@ -1574,7 +1638,7 @@ static int sfp_sm_mod_probe(struct sfp *
- 		 (int)sizeof(id.ext.datecode), id.ext.datecode);
- 
- 	/* Check whether we support this module */
--	if (!sfp->type->module_supported(&sfp->id)) {
-+	if (!sfp->type->module_supported(&id)) {
- 		dev_err(sfp->dev,
- 			"module is not supported - phys id 0x%02x 0x%02x\n",
- 			sfp->id.base.phys_id, sfp->id.base.phys_ext_id);
-@@ -1764,6 +1828,7 @@ static void sfp_sm_main(struct sfp *sfp,
- 		if (sfp->mod_phy)
- 			sfp_sm_phy_detach(sfp);
- 		sfp_module_tx_disable(sfp);
-+		sfp_soft_stop_poll(sfp);
- 		sfp_sm_next(sfp, SFP_S_DOWN, 0);
- 		return;
- 	}
-@@ -1775,7 +1840,10 @@ static void sfp_sm_main(struct sfp *sfp,
- 		    sfp->sm_dev_state != SFP_DEV_UP)
- 			break;
- 
--		sfp_sm_mod_init(sfp);
-+		if (!(sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE))
-+			sfp_soft_start_poll(sfp);
-+
-+		sfp_module_tx_enable(sfp);
- 
- 		/* Initialise the fault clearance retries */
- 		sfp->sm_retries = 5;
-@@ -2031,7 +2099,10 @@ static void sfp_poll(struct work_struct
- 	struct sfp *sfp = container_of(work, struct sfp, poll.work);
- 
- 	sfp_check_state(sfp);
--	mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
-+
-+	if (sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT) ||
-+	    sfp->need_poll)
-+		mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
- }
- 
- static struct sfp *sfp_alloc(struct device *dev)
-@@ -2076,7 +2147,6 @@ static int sfp_probe(struct platform_dev
- 	const struct sff_data *sff;
- 	struct i2c_adapter *i2c;
- 	struct sfp *sfp;
--	bool poll = false;
- 	int err, i;
- 
- 	sfp = sfp_alloc(&pdev->dev);
-@@ -2184,7 +2254,7 @@ static int sfp_probe(struct platform_dev
- 		sfp->gpio_irq[i] = gpiod_to_irq(sfp->gpio[i]);
- 		if (sfp->gpio_irq[i] < 0) {
- 			sfp->gpio_irq[i] = 0;
--			poll = true;
-+			sfp->need_poll = true;
- 			continue;
- 		}
- 
-@@ -2196,11 +2266,11 @@ static int sfp_probe(struct platform_dev
- 						dev_name(sfp->dev), sfp);
- 		if (err) {
- 			sfp->gpio_irq[i] = 0;
--			poll = true;
-+			sfp->need_poll = true;
- 		}
- 	}
- 
--	if (poll)
-+	if (sfp->need_poll)
- 		mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
- 
- 	/* We could have an issue in cases no Tx disable pin is available or
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -428,6 +428,10 @@ enum {
- 	SFP_TEC_CUR			= 0x6c,
- 
- 	SFP_STATUS			= 0x6e,
-+	SFP_STATUS_TX_DISABLE		= BIT(7),
-+	SFP_STATUS_TX_DISABLE_FORCE	= BIT(6),
-+	SFP_STATUS_TX_FAULT		= BIT(2),
-+	SFP_STATUS_RX_LOS		= BIT(1),
- 	SFP_ALARM0			= 0x70,
- 	SFP_ALARM0_TEMP_HIGH		= BIT(7),
- 	SFP_ALARM0_TEMP_LOW		= BIT(6),
diff --git a/target/linux/generic/backport-5.4/745-v5.7-net-dsa-mt7530-add-support-for-port-mirroring.patch b/target/linux/generic/backport-5.4/745-v5.7-net-dsa-mt7530-add-support-for-port-mirroring.patch
deleted file mode 100644
index 71a06997c3..0000000000
--- a/target/linux/generic/backport-5.4/745-v5.7-net-dsa-mt7530-add-support-for-port-mirroring.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From 37feab6076aa816ed72fe836759a485353241916 Mon Sep 17 00:00:00 2001
-From: DENG Qingfang <dqfext@gmail.com>
-Date: Fri, 6 Mar 2020 20:35:35 +0800
-Subject: net: dsa: mt7530: add support for port mirroring
-
-Add support for configuring port mirroring through the cls_matchall
-classifier. We do a full ingress and/or egress capture towards a
-capture port.
-MT7530 supports one monitor port and multiple mirrored ports.
-
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++++
- drivers/net/dsa/mt7530.h |  7 ++++++
- 2 files changed, 67 insertions(+)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1143,6 +1143,64 @@ mt7530_port_vlan_del(struct dsa_switch *
- 	return 0;
- }
- 
-+static int mt7530_port_mirror_add(struct dsa_switch *ds, int port,
-+				  struct dsa_mall_mirror_tc_entry *mirror,
-+				  bool ingress)
-+{
-+	struct mt7530_priv *priv = ds->priv;
-+	u32 val;
-+
-+	/* Check for existent entry */
-+	if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port))
-+		return -EEXIST;
-+
-+	val = mt7530_read(priv, MT7530_MFC);
-+
-+	/* MT7530 only supports one monitor port */
-+	if (val & MIRROR_EN && MIRROR_PORT(val) != mirror->to_local_port)
-+		return -EEXIST;
-+
-+	val |= MIRROR_EN;
-+	val &= ~MIRROR_MASK;
-+	val |= mirror->to_local_port;
-+	mt7530_write(priv, MT7530_MFC, val);
-+
-+	val = mt7530_read(priv, MT7530_PCR_P(port));
-+	if (ingress) {
-+		val |= PORT_RX_MIR;
-+		priv->mirror_rx |= BIT(port);
-+	} else {
-+		val |= PORT_TX_MIR;
-+		priv->mirror_tx |= BIT(port);
-+	}
-+	mt7530_write(priv, MT7530_PCR_P(port), val);
-+
-+	return 0;
-+}
-+
-+static void mt7530_port_mirror_del(struct dsa_switch *ds, int port,
-+				   struct dsa_mall_mirror_tc_entry *mirror)
-+{
-+	struct mt7530_priv *priv = ds->priv;
-+	u32 val;
-+
-+	val = mt7530_read(priv, MT7530_PCR_P(port));
-+	if (mirror->ingress) {
-+		val &= ~PORT_RX_MIR;
-+		priv->mirror_rx &= ~BIT(port);
-+	} else {
-+		val &= ~PORT_TX_MIR;
-+		priv->mirror_tx &= ~BIT(port);
-+	}
-+	mt7530_write(priv, MT7530_PCR_P(port), val);
-+
-+	if (!priv->mirror_rx && !priv->mirror_tx) {
-+		val = mt7530_read(priv, MT7530_MFC);
-+		val &= ~MIRROR_EN;
-+		mt7530_write(priv, MT7530_MFC, val);
-+	}
-+}
-+
- static enum dsa_tag_protocol
- mtk_get_tag_protocol(struct dsa_switch *ds, int port)
- {
-@@ -1520,6 +1578,8 @@ static const struct dsa_switch_ops mt753
- 	.port_vlan_prepare	= mt7530_port_vlan_prepare,
- 	.port_vlan_add		= mt7530_port_vlan_add,
- 	.port_vlan_del		= mt7530_port_vlan_del,
-+	.port_mirror_add	= mt7530_port_mirror_add,
-+	.port_mirror_del	= mt7530_port_mirror_del,
- 	.phylink_validate	= mt7530_phylink_validate,
- 	.phylink_mac_link_state = mt7530_phylink_mac_link_state,
- 	.phylink_mac_config	= mt7530_phylink_mac_config,
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -37,6 +37,9 @@ enum {
- #define  CPU_EN				BIT(7)
- #define  CPU_PORT(x)			((x) << 4)
- #define  CPU_MASK			(0xf << 4)
-+#define  MIRROR_EN			BIT(3)
-+#define  MIRROR_PORT(x)			((x) & 0x7)
-+#define  MIRROR_MASK			0x7
- 
- /* Registers for address table access */
- #define MT7530_ATA1			0x74
-@@ -142,6 +145,8 @@ enum mt7530_stp_state {
- 
- /* Register for port control */
- #define MT7530_PCR_P(x)			(0x2004 + ((x) * 0x100))
-+#define  PORT_TX_MIR			BIT(9)
-+#define  PORT_RX_MIR			BIT(8)
- #define  PORT_VLAN(x)			((x) & 0x3)
- 
- enum mt7530_port_mode {
-@@ -464,6 +469,8 @@ struct mt7530_priv {
- 	phy_interface_t		p6_interface;
- 	phy_interface_t		p5_interface;
- 	unsigned int		p5_intf_sel;
-+	u8			mirror_rx;
-+	u8			mirror_tx;
- 
- 	struct mt7530_port	ports[MT7530_NUM_PORTS];
- 	/* protect among processes for registers access*/
diff --git a/target/linux/generic/backport-5.4/746-v5.5-net-dsa-mv88e6xxx-Split-monitor-port-configuration.patch b/target/linux/generic/backport-5.4/746-v5.5-net-dsa-mv88e6xxx-Split-monitor-port-configuration.patch
deleted file mode 100644
index 683178727c..0000000000
--- a/target/linux/generic/backport-5.4/746-v5.5-net-dsa-mv88e6xxx-Split-monitor-port-configuration.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From 5c74c54ce6fff719999ff48f128cf4150ee4ff59 Mon Sep 17 00:00:00 2001
-From: Iwan R Timmer <irtimmer@gmail.com>
-Date: Thu, 7 Nov 2019 22:11:13 +0100
-Subject: [PATCH] net: dsa: mv88e6xxx: Split monitor port configuration
-
-Separate the configuration of the egress and ingress monitor port.
-This allows the port mirror functionality to do ingress and egress
-port mirroring to separate ports.
-
-Signed-off-by: Iwan R Timmer <irtimmer@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mv88e6xxx/chip.c    |  9 ++++++-
- drivers/net/dsa/mv88e6xxx/chip.h    |  9 ++++++-
- drivers/net/dsa/mv88e6xxx/global1.c | 42 ++++++++++++++++++++---------
- drivers/net/dsa/mv88e6xxx/global1.h |  8 ++++--
- 4 files changed, 52 insertions(+), 16 deletions(-)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -2384,7 +2384,14 @@ static int mv88e6xxx_setup_upstream_port
- 
- 		if (chip->info->ops->set_egress_port) {
- 			err = chip->info->ops->set_egress_port(chip,
--							       upstream_port);
-+						MV88E6XXX_EGRESS_DIR_INGRESS,
-+						upstream_port);
-+			if (err)
-+				return err;
-+
-+			err = chip->info->ops->set_egress_port(chip,
-+						MV88E6XXX_EGRESS_DIR_EGRESS,
-+						upstream_port);
- 			if (err)
- 				return err;
- 		}
---- a/drivers/net/dsa/mv88e6xxx/chip.h
-+++ b/drivers/net/dsa/mv88e6xxx/chip.h
-@@ -33,6 +33,11 @@ enum mv88e6xxx_egress_mode {
- 	MV88E6XXX_EGRESS_MODE_ETHERTYPE,
- };
- 
-+enum mv88e6xxx_egress_direction {
-+        MV88E6XXX_EGRESS_DIR_INGRESS,
-+        MV88E6XXX_EGRESS_DIR_EGRESS,
-+};
-+
- enum mv88e6xxx_frame_mode {
- 	MV88E6XXX_FRAME_MODE_NORMAL,
- 	MV88E6XXX_FRAME_MODE_DSA,
-@@ -464,7 +469,9 @@ struct mv88e6xxx_ops {
- 	int (*stats_get_stats)(struct mv88e6xxx_chip *chip,  int port,
- 			       uint64_t *data);
- 	int (*set_cpu_port)(struct mv88e6xxx_chip *chip, int port);
--	int (*set_egress_port)(struct mv88e6xxx_chip *chip, int port);
-+	int (*set_egress_port)(struct mv88e6xxx_chip *chip,
-+			       enum mv88e6xxx_egress_direction direction,
-+			       int port);
- 
- #define MV88E6XXX_CASCADE_PORT_NONE		0xe
- #define MV88E6XXX_CASCADE_PORT_MULTIPLE		0xf
---- a/drivers/net/dsa/mv88e6xxx/global1.c
-+++ b/drivers/net/dsa/mv88e6xxx/global1.c
-@@ -294,7 +294,9 @@ int mv88e6250_g1_ieee_pri_map(struct mv8
- /* Offset 0x1a: Monitor Control */
- /* Offset 0x1a: Monitor & MGMT Control on some devices */
- 
--int mv88e6095_g1_set_egress_port(struct mv88e6xxx_chip *chip, int port)
-+int mv88e6095_g1_set_egress_port(struct mv88e6xxx_chip *chip,
-+				 enum mv88e6xxx_egress_direction direction,
-+				 int port)
- {
- 	u16 reg;
- 	int err;
-@@ -303,11 +305,20 @@ int mv88e6095_g1_set_egress_port(struct
- 	if (err)
- 		return err;
- 
--	reg &= ~(MV88E6185_G1_MONITOR_CTL_INGRESS_DEST_MASK |
--		 MV88E6185_G1_MONITOR_CTL_EGRESS_DEST_MASK);
--
--	reg |= port << __bf_shf(MV88E6185_G1_MONITOR_CTL_INGRESS_DEST_MASK) |
--		port << __bf_shf(MV88E6185_G1_MONITOR_CTL_EGRESS_DEST_MASK);
-+	switch (direction) {
-+	case MV88E6XXX_EGRESS_DIR_INGRESS:
-+		reg &= MV88E6185_G1_MONITOR_CTL_INGRESS_DEST_MASK;
-+		reg |= port <<
-+		       __bf_shf(MV88E6185_G1_MONITOR_CTL_INGRESS_DEST_MASK);
-+		break;
-+	case MV88E6XXX_EGRESS_DIR_EGRESS:
-+		reg &= MV88E6185_G1_MONITOR_CTL_EGRESS_DEST_MASK;
-+		reg |= port <<
-+		       __bf_shf(MV88E6185_G1_MONITOR_CTL_EGRESS_DEST_MASK);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
- 
- 	return mv88e6xxx_g1_write(chip, MV88E6185_G1_MONITOR_CTL, reg);
- }
-@@ -341,17 +352,24 @@ static int mv88e6390_g1_monitor_write(st
- 	return mv88e6xxx_g1_write(chip, MV88E6390_G1_MONITOR_MGMT_CTL, reg);
- }
- 
--int mv88e6390_g1_set_egress_port(struct mv88e6xxx_chip *chip, int port)
-+int mv88e6390_g1_set_egress_port(struct mv88e6xxx_chip *chip,
-+				 enum mv88e6xxx_egress_direction direction,
-+				 int port)
- {
- 	u16 ptr;
- 	int err;
- 
--	ptr = MV88E6390_G1_MONITOR_MGMT_CTL_PTR_INGRESS_DEST;
--	err = mv88e6390_g1_monitor_write(chip, ptr, port);
--	if (err)
--		return err;
-+	switch (direction) {
-+	case MV88E6XXX_EGRESS_DIR_INGRESS:
-+		ptr = MV88E6390_G1_MONITOR_MGMT_CTL_PTR_INGRESS_DEST;
-+		break;
-+	case MV88E6XXX_EGRESS_DIR_EGRESS:
-+		ptr = MV88E6390_G1_MONITOR_MGMT_CTL_PTR_EGRESS_DEST;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
- 
--	ptr = MV88E6390_G1_MONITOR_MGMT_CTL_PTR_EGRESS_DEST;
- 	err = mv88e6390_g1_monitor_write(chip, ptr, port);
- 	if (err)
- 		return err;
---- a/drivers/net/dsa/mv88e6xxx/global1.h
-+++ b/drivers/net/dsa/mv88e6xxx/global1.h
-@@ -289,8 +289,12 @@ int mv88e6095_g1_stats_set_histogram(str
- int mv88e6390_g1_stats_set_histogram(struct mv88e6xxx_chip *chip);
- void mv88e6xxx_g1_stats_read(struct mv88e6xxx_chip *chip, int stat, u32 *val);
- int mv88e6xxx_g1_stats_clear(struct mv88e6xxx_chip *chip);
--int mv88e6095_g1_set_egress_port(struct mv88e6xxx_chip *chip, int port);
--int mv88e6390_g1_set_egress_port(struct mv88e6xxx_chip *chip, int port);
-+int mv88e6095_g1_set_egress_port(struct mv88e6xxx_chip *chip,
-+				 enum mv88e6xxx_egress_direction direction,
-+				 int port);
-+int mv88e6390_g1_set_egress_port(struct mv88e6xxx_chip *chip,
-+				 enum mv88e6xxx_egress_direction direction,
-+				 int port);
- int mv88e6095_g1_set_cpu_port(struct mv88e6xxx_chip *chip, int port);
- int mv88e6390_g1_set_cpu_port(struct mv88e6xxx_chip *chip, int port);
- int mv88e6390_g1_mgmt_rsvd2cpu(struct mv88e6xxx_chip *chip);
diff --git a/target/linux/generic/backport-5.4/747-v5.5-net-dsa-mv88e6xxx-Add-support-for-port-mirroring.patch b/target/linux/generic/backport-5.4/747-v5.5-net-dsa-mv88e6xxx-Add-support-for-port-mirroring.patch
deleted file mode 100644
index a23f45075f..0000000000
--- a/target/linux/generic/backport-5.4/747-v5.5-net-dsa-mv88e6xxx-Add-support-for-port-mirroring.patch
+++ /dev/null
@@ -1,266 +0,0 @@
-From f0942e00a1abb6404ca4302c66497fc623676c11 Mon Sep 17 00:00:00 2001
-From: Iwan R Timmer <irtimmer@gmail.com>
-Date: Thu, 7 Nov 2019 22:11:14 +0100
-Subject: [PATCH] net: dsa: mv88e6xxx: Add support for port mirroring
-
-Add support for configuring port mirroring through the cls_matchall
-classifier. We do a full ingress and/or egress capture towards a
-capture port. It allows setting a different capture port for ingress
-and egress traffic.
-
-It keeps track of the mirrored ports and the destination ports to
-prevent changes to the capture port while other ports are being
-mirrored.
-
-Signed-off-by: Iwan R Timmer <irtimmer@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mv88e6xxx/chip.c    | 76 +++++++++++++++++++++++++++++
- drivers/net/dsa/mv88e6xxx/chip.h    |  6 +++
- drivers/net/dsa/mv88e6xxx/global1.c | 18 +++++--
- drivers/net/dsa/mv88e6xxx/port.c    | 37 ++++++++++++++
- drivers/net/dsa/mv88e6xxx/port.h    |  3 ++
- 5 files changed, 136 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -4926,6 +4926,80 @@ static int mv88e6xxx_port_mdb_del(struct
- 	return err;
- }
- 
-+static int mv88e6xxx_port_mirror_add(struct dsa_switch *ds, int port,
-+				     struct dsa_mall_mirror_tc_entry *mirror,
-+				     bool ingress)
-+{
-+	enum mv88e6xxx_egress_direction direction = ingress ?
-+						MV88E6XXX_EGRESS_DIR_INGRESS :
-+						MV88E6XXX_EGRESS_DIR_EGRESS;
-+	struct mv88e6xxx_chip *chip = ds->priv;
-+	bool other_mirrors = false;
-+	int i;
-+	int err;
-+
-+	if (!chip->info->ops->set_egress_port)
-+		return -EOPNOTSUPP;
-+
-+	mutex_lock(&chip->reg_lock);
-+	if ((ingress ? chip->ingress_dest_port : chip->egress_dest_port) !=
-+	    mirror->to_local_port) {
-+		for (i = 0; i < mv88e6xxx_num_ports(chip); i++)
-+			other_mirrors |= ingress ?
-+					 chip->ports[i].mirror_ingress :
-+					 chip->ports[i].mirror_egress;
-+
-+		/* Can't change egress port when other mirror is active */
-+		if (other_mirrors) {
-+			err = -EBUSY;
-+			goto out;
-+		}
-+
-+		err = chip->info->ops->set_egress_port(chip,
-+						       direction,
-+						       mirror->to_local_port);
-+		if (err)
-+			goto out;
-+	}
-+
-+	err = mv88e6xxx_port_set_mirror(chip, port, direction, true);
-+out:
-+	mutex_unlock(&chip->reg_lock);
-+
-+	return err;
-+}
-+
-+static void mv88e6xxx_port_mirror_del(struct dsa_switch *ds, int port,
-+				      struct dsa_mall_mirror_tc_entry *mirror)
-+{
-+	enum mv88e6xxx_egress_direction direction = mirror->ingress ?
-+						MV88E6XXX_EGRESS_DIR_INGRESS :
-+						MV88E6XXX_EGRESS_DIR_EGRESS;
-+	struct mv88e6xxx_chip *chip = ds->priv;
-+	bool other_mirrors = false;
-+	int i;
-+
-+	mutex_lock(&chip->reg_lock);
-+	if (mv88e6xxx_port_set_mirror(chip, port, direction, false))
-+		dev_err(ds->dev, "p%d: failed to disable mirroring\n", port);
-+
-+	for (i = 0; i < mv88e6xxx_num_ports(chip); i++)
-+		other_mirrors |= mirror->ingress ?
-+				 chip->ports[i].mirror_ingress :
-+				 chip->ports[i].mirror_egress;
-+
-+	/* Reset egress port when no other mirror is active */
-+	if (!other_mirrors) {
-+		if (chip->info->ops->set_egress_port(chip,
-+						     direction,
-+						     dsa_upstream_port(ds,
-+								       port)));
-+			dev_err(ds->dev, "failed to set egress port\n");
-+	}
-+
-+	mutex_unlock(&chip->reg_lock);
-+}
-+
- static int mv88e6xxx_port_egress_floods(struct dsa_switch *ds, int port,
- 					 bool unicast, bool multicast)
- {
-@@ -4980,6 +5054,8 @@ static const struct dsa_switch_ops mv88e
- 	.port_mdb_prepare       = mv88e6xxx_port_mdb_prepare,
- 	.port_mdb_add           = mv88e6xxx_port_mdb_add,
- 	.port_mdb_del           = mv88e6xxx_port_mdb_del,
-+	.port_mirror_add	= mv88e6xxx_port_mirror_add,
-+	.port_mirror_del	= mv88e6xxx_port_mirror_del,
- 	.crosschip_bridge_join	= mv88e6xxx_crosschip_bridge_join,
- 	.crosschip_bridge_leave	= mv88e6xxx_crosschip_bridge_leave,
- 	.port_hwtstamp_set	= mv88e6xxx_port_hwtstamp_set,
---- a/drivers/net/dsa/mv88e6xxx/chip.h
-+++ b/drivers/net/dsa/mv88e6xxx/chip.h
-@@ -232,6 +232,8 @@ struct mv88e6xxx_port {
- 	u64 vtu_member_violation;
- 	u64 vtu_miss_violation;
- 	u8 cmode;
-+	bool mirror_ingress;
-+	bool mirror_egress;
- 	unsigned int serdes_irq;
- };
- 
-@@ -315,6 +317,10 @@ struct mv88e6xxx_chip {
- 	u16 evcap_config;
- 	u16 enable_count;
- 
-+	/* Current ingress and egress monitor ports */
-+	int egress_dest_port;
-+	int ingress_dest_port;
-+
- 	/* Per-port timestamping resources. */
- 	struct mv88e6xxx_port_hwtstamp port_hwtstamp[DSA_MAX_PORTS];
- 
---- a/drivers/net/dsa/mv88e6xxx/global1.c
-+++ b/drivers/net/dsa/mv88e6xxx/global1.c
-@@ -298,6 +298,7 @@ int mv88e6095_g1_set_egress_port(struct
- 				 enum mv88e6xxx_egress_direction direction,
- 				 int port)
- {
-+	int *dest_port_chip;
- 	u16 reg;
- 	int err;
- 
-@@ -307,11 +308,13 @@ int mv88e6095_g1_set_egress_port(struct
- 
- 	switch (direction) {
- 	case MV88E6XXX_EGRESS_DIR_INGRESS:
-+		dest_port_chip = &chip->ingress_dest_port;
- 		reg &= MV88E6185_G1_MONITOR_CTL_INGRESS_DEST_MASK;
- 		reg |= port <<
- 		       __bf_shf(MV88E6185_G1_MONITOR_CTL_INGRESS_DEST_MASK);
- 		break;
- 	case MV88E6XXX_EGRESS_DIR_EGRESS:
-+		dest_port_chip = &chip->egress_dest_port;
- 		reg &= MV88E6185_G1_MONITOR_CTL_EGRESS_DEST_MASK;
- 		reg |= port <<
- 		       __bf_shf(MV88E6185_G1_MONITOR_CTL_EGRESS_DEST_MASK);
-@@ -320,7 +323,11 @@ int mv88e6095_g1_set_egress_port(struct
- 		return -EINVAL;
- 	}
- 
--	return mv88e6xxx_g1_write(chip, MV88E6185_G1_MONITOR_CTL, reg);
-+	err = mv88e6xxx_g1_write(chip, MV88E6185_G1_MONITOR_CTL, reg);
-+	if (!err)
-+		*dest_port_chip = port;
-+
-+	return err;
- }
- 
- /* Older generations also call this the ARP destination. It has been
-@@ -356,14 +363,17 @@ int mv88e6390_g1_set_egress_port(struct
- 				 enum mv88e6xxx_egress_direction direction,
- 				 int port)
- {
-+	int *dest_port_chip;
- 	u16 ptr;
- 	int err;
- 
- 	switch (direction) {
- 	case MV88E6XXX_EGRESS_DIR_INGRESS:
-+		dest_port_chip = &chip->ingress_dest_port;
- 		ptr = MV88E6390_G1_MONITOR_MGMT_CTL_PTR_INGRESS_DEST;
- 		break;
- 	case MV88E6XXX_EGRESS_DIR_EGRESS:
-+		dest_port_chip = &chip->egress_dest_port;
- 		ptr = MV88E6390_G1_MONITOR_MGMT_CTL_PTR_EGRESS_DEST;
- 		break;
- 	default:
-@@ -371,10 +381,10 @@ int mv88e6390_g1_set_egress_port(struct
- 	}
- 
- 	err = mv88e6390_g1_monitor_write(chip, ptr, port);
--	if (err)
--		return err;
-+	if (!err)
-+		*dest_port_chip = port;
- 
--	return 0;
-+	return err;
- }
- 
- int mv88e6390_g1_set_cpu_port(struct mv88e6xxx_chip *chip, int port)
---- a/drivers/net/dsa/mv88e6xxx/port.c
-+++ b/drivers/net/dsa/mv88e6xxx/port.c
-@@ -1181,6 +1181,43 @@ int mv88e6095_port_set_upstream_port(str
- 	return mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_CTL2, reg);
- }
- 
-+int mv88e6xxx_port_set_mirror(struct mv88e6xxx_chip *chip, int port,
-+			      enum mv88e6xxx_egress_direction direction,
-+			      bool mirror)
-+{
-+	bool *mirror_port;
-+	u16 reg;
-+	u16 bit;
-+	int err;
-+
-+	err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_CTL2, &reg);
-+	if (err)
-+		return err;
-+
-+	switch (direction) {
-+	case MV88E6XXX_EGRESS_DIR_INGRESS:
-+		bit = MV88E6XXX_PORT_CTL2_INGRESS_MONITOR;
-+		mirror_port = &chip->ports[port].mirror_ingress;
-+		break;
-+	case MV88E6XXX_EGRESS_DIR_EGRESS:
-+		bit = MV88E6XXX_PORT_CTL2_EGRESS_MONITOR;
-+		mirror_port = &chip->ports[port].mirror_egress;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	reg &= ~bit;
-+	if (mirror)
-+		reg |= bit;
-+
-+	err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_CTL2, reg);
-+	if (!err)
-+		*mirror_port = mirror;
-+
-+	return err;
-+}
-+
- int mv88e6xxx_port_set_8021q_mode(struct mv88e6xxx_chip *chip, int port,
- 				  u16 mode)
- {
---- a/drivers/net/dsa/mv88e6xxx/port.h
-+++ b/drivers/net/dsa/mv88e6xxx/port.h
-@@ -368,6 +368,9 @@ int mv88e6352_port_link_state(struct mv8
- int mv88e6xxx_port_set_map_da(struct mv88e6xxx_chip *chip, int port);
- int mv88e6095_port_set_upstream_port(struct mv88e6xxx_chip *chip, int port,
- 				     int upstream_port);
-+int mv88e6xxx_port_set_mirror(struct mv88e6xxx_chip *chip, int port,
-+			      enum mv88e6xxx_egress_direction direction,
-+			      bool mirror);
- 
- int mv88e6xxx_port_disable_learn_limit(struct mv88e6xxx_chip *chip, int port);
- int mv88e6xxx_port_disable_pri_override(struct mv88e6xxx_chip *chip, int port);
diff --git a/target/linux/generic/backport-5.4/748-v5.5-net-dsa-mv88e6xxx-fix-broken-if-statement-because-of.patch b/target/linux/generic/backport-5.4/748-v5.5-net-dsa-mv88e6xxx-fix-broken-if-statement-because-of.patch
deleted file mode 100644
index 37e7a7f2a9..0000000000
--- a/target/linux/generic/backport-5.4/748-v5.5-net-dsa-mv88e6xxx-fix-broken-if-statement-because-of.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 4e4637b10374ede3cd33d7e1b389e6cea6343ea3 Mon Sep 17 00:00:00 2001
-From: Colin Ian King <colin.king@canonical.com>
-Date: Tue, 12 Nov 2019 13:05:23 +0000
-Subject: [PATCH] net: dsa: mv88e6xxx: fix broken if statement because of a
- stray semicolon
-
-There is a stray semicolon in an if statement that will cause a dev_err
-message to be printed unconditionally. Fix this by removing the stray
-semicolon.
-
-Addresses-Coverity: ("Stay semicolon")
-Fixes: f0942e00a1ab ("net: dsa: mv88e6xxx: Add support for port mirroring")
-Signed-off-by: Colin Ian King <colin.king@canonical.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mv88e6xxx/chip.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -4993,7 +4993,7 @@ static void mv88e6xxx_port_mirror_del(st
- 		if (chip->info->ops->set_egress_port(chip,
- 						     direction,
- 						     dsa_upstream_port(ds,
--								       port)));
-+								       port)))
- 			dev_err(ds->dev, "failed to set egress port\n");
- 	}
- 
diff --git a/target/linux/generic/backport-5.4/749-v5.5-net-dsa-mv88e6xxx-Fix-masking-of-egress-port.patch b/target/linux/generic/backport-5.4/749-v5.5-net-dsa-mv88e6xxx-Fix-masking-of-egress-port.patch
deleted file mode 100644
index 497a808511..0000000000
--- a/target/linux/generic/backport-5.4/749-v5.5-net-dsa-mv88e6xxx-Fix-masking-of-egress-port.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 3ee339eb28959629db33aaa2b8cde4c63c6289eb Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Thu, 27 Feb 2020 21:20:49 +0100
-Subject: [PATCH] net: dsa: mv88e6xxx: Fix masking of egress port
-
-Add missing ~ to the usage of the mask.
-
-Reported-by: Kevin Benson <Kevin.Benson@zii.aero>
-Reported-by: Chris Healy <Chris.Healy@zii.aero>
-Fixes: 5c74c54ce6ff ("net: dsa: mv88e6xxx: Split monitor port configuration")
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mv88e6xxx/global1.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/dsa/mv88e6xxx/global1.c
-+++ b/drivers/net/dsa/mv88e6xxx/global1.c
-@@ -309,13 +309,13 @@ int mv88e6095_g1_set_egress_port(struct
- 	switch (direction) {
- 	case MV88E6XXX_EGRESS_DIR_INGRESS:
- 		dest_port_chip = &chip->ingress_dest_port;
--		reg &= MV88E6185_G1_MONITOR_CTL_INGRESS_DEST_MASK;
-+		reg &= ~MV88E6185_G1_MONITOR_CTL_INGRESS_DEST_MASK;
- 		reg |= port <<
- 		       __bf_shf(MV88E6185_G1_MONITOR_CTL_INGRESS_DEST_MASK);
- 		break;
- 	case MV88E6XXX_EGRESS_DIR_EGRESS:
- 		dest_port_chip = &chip->egress_dest_port;
--		reg &= MV88E6185_G1_MONITOR_CTL_EGRESS_DEST_MASK;
-+		reg &= ~MV88E6185_G1_MONITOR_CTL_EGRESS_DEST_MASK;
- 		reg |= port <<
- 		       __bf_shf(MV88E6185_G1_MONITOR_CTL_EGRESS_DEST_MASK);
- 		break;
diff --git a/target/linux/generic/backport-5.4/750-v5.5-net-phy-add-support-for-clause-37-auto-negotiation.patch b/target/linux/generic/backport-5.4/750-v5.5-net-phy-add-support-for-clause-37-auto-negotiation.patch
deleted file mode 100644
index 69c56eca7a..0000000000
--- a/target/linux/generic/backport-5.4/750-v5.5-net-phy-add-support-for-clause-37-auto-negotiation.patch
+++ /dev/null
@@ -1,195 +0,0 @@
-From fa6e98cee558622565c97924e922b97340aeabd8 Mon Sep 17 00:00:00 2001
-From: Heiner Kallweit <hkallweit1@gmail.com>
-Date: Tue, 22 Oct 2019 11:31:07 -0700
-Subject: [PATCH] net: phy: add support for clause 37 auto-negotiation
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch adds support for clause 37 1000Base-X auto-negotiation.
-
-Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
-Signed-off-by: Tao Ren <taoren@fb.com>
-Tested-by: René van Dorst <opensource@vdorst.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phy_device.c | 139 +++++++++++++++++++++++++++++++++++
- include/linux/phy.h          |   4 +
- 2 files changed, 143 insertions(+)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -1682,6 +1682,40 @@ static int genphy_config_advert(struct p
- }
- 
- /**
-+ * genphy_c37_config_advert - sanitize and advertise auto-negotiation parameters
-+ * @phydev: target phy_device struct
-+ *
-+ * Description: Writes MII_ADVERTISE with the appropriate values,
-+ *   after sanitizing the values to make sure we only advertise
-+ *   what is supported.  Returns < 0 on error, 0 if the PHY's advertisement
-+ *   hasn't changed, and > 0 if it has changed. This function is intended
-+ *   for Clause 37 1000Base-X mode.
-+ */
-+static int genphy_c37_config_advert(struct phy_device *phydev)
-+{
-+	u16 adv = 0;
-+
-+	/* Only allow advertising what this PHY supports */
-+	linkmode_and(phydev->advertising, phydev->advertising,
-+		     phydev->supported);
-+
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
-+			      phydev->advertising))
-+		adv |= ADVERTISE_1000XFULL;
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
-+			      phydev->advertising))
-+		adv |= ADVERTISE_1000XPAUSE;
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
-+			      phydev->advertising))
-+		adv |= ADVERTISE_1000XPSE_ASYM;
-+
-+	return phy_modify_changed(phydev, MII_ADVERTISE,
-+				  ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE |
-+				  ADVERTISE_1000XHALF | ADVERTISE_1000XPSE_ASYM,
-+				  adv);
-+}
-+
-+/**
-  * genphy_config_eee_advert - disable unwanted eee mode advertisement
-  * @phydev: target phy_device struct
-  *
-@@ -1790,6 +1824,54 @@ int __genphy_config_aneg(struct phy_devi
- EXPORT_SYMBOL(__genphy_config_aneg);
- 
- /**
-+ * genphy_c37_config_aneg - restart auto-negotiation or write BMCR
-+ * @phydev: target phy_device struct
-+ *
-+ * Description: If auto-negotiation is enabled, we configure the
-+ *   advertising, and then restart auto-negotiation.  If it is not
-+ *   enabled, then we write the BMCR. This function is intended
-+ *   for use with Clause 37 1000Base-X mode.
-+ */
-+int genphy_c37_config_aneg(struct phy_device *phydev)
-+{
-+	int err, changed;
-+
-+	if (phydev->autoneg != AUTONEG_ENABLE)
-+		return genphy_setup_forced(phydev);
-+
-+	err = phy_modify(phydev, MII_BMCR, BMCR_SPEED1000 | BMCR_SPEED100,
-+			 BMCR_SPEED1000);
-+	if (err)
-+		return err;
-+
-+	changed = genphy_c37_config_advert(phydev);
-+	if (changed < 0) /* error */
-+		return changed;
-+
-+	if (!changed) {
-+		/* Advertisement hasn't changed, but maybe aneg was never on to
-+		 * begin with?  Or maybe phy was isolated?
-+		 */
-+		int ctl = phy_read(phydev, MII_BMCR);
-+
-+		if (ctl < 0)
-+			return ctl;
-+
-+		if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
-+			changed = 1; /* do restart aneg */
-+	}
-+
-+	/* Only restart aneg if we are advertising something different
-+	 * than we were before.
-+	 */
-+	if (changed > 0)
-+		return genphy_restart_aneg(phydev);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(genphy_c37_config_aneg);
-+
-+/**
-  * genphy_aneg_done - return auto-negotiation status
-  * @phydev: target phy_device struct
-  *
-@@ -1962,6 +2044,63 @@ int genphy_read_status(struct phy_device
- EXPORT_SYMBOL(genphy_read_status);
- 
- /**
-+ * genphy_c37_read_status - check the link status and update current link state
-+ * @phydev: target phy_device struct
-+ *
-+ * Description: Check the link, then figure out the current state
-+ *   by comparing what we advertise with what the link partner
-+ *   advertises. This function is for Clause 37 1000Base-X mode.
-+ */
-+int genphy_c37_read_status(struct phy_device *phydev)
-+{
-+	int lpa, err, old_link = phydev->link;
-+
-+	/* Update the link, but return if there was an error */
-+	err = genphy_update_link(phydev);
-+	if (err)
-+		return err;
-+
-+	/* why bother the PHY if nothing can have changed */
-+	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
-+		return 0;
-+
-+	phydev->duplex = DUPLEX_UNKNOWN;
-+	phydev->pause = 0;
-+	phydev->asym_pause = 0;
-+
-+	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
-+		lpa = phy_read(phydev, MII_LPA);
-+		if (lpa < 0)
-+			return lpa;
-+
-+		linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-+				 phydev->lp_advertising, lpa & LPA_LPACK);
-+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
-+				 phydev->lp_advertising, lpa & LPA_1000XFULL);
-+		linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT,
-+				 phydev->lp_advertising, lpa & LPA_1000XPAUSE);
-+		linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
-+				 phydev->lp_advertising,
-+				 lpa & LPA_1000XPAUSE_ASYM);
-+
-+		phy_resolve_aneg_linkmode(phydev);
-+	} else if (phydev->autoneg == AUTONEG_DISABLE) {
-+		int bmcr = phy_read(phydev, MII_BMCR);
-+
-+		if (bmcr < 0)
-+			return bmcr;
-+
-+		if (bmcr & BMCR_FULLDPLX)
-+			phydev->duplex = DUPLEX_FULL;
-+		else
-+			phydev->duplex = DUPLEX_HALF;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(genphy_c37_read_status);
-+
-+/**
-  * genphy_soft_reset - software reset the PHY via BMCR_RESET bit
-  * @phydev: target phy_device struct
-  *
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -1120,6 +1120,10 @@ int genphy_read_mmd_unsupported(struct p
- int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum,
- 				 u16 regnum, u16 val);
- 
-+/* Clause 37 */
-+int genphy_c37_config_aneg(struct phy_device *phydev);
-+int genphy_c37_read_status(struct phy_device *phydev);
-+
- /* Clause 45 PHY */
- int genphy_c45_restart_aneg(struct phy_device *phydev);
- int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart);
diff --git a/target/linux/generic/backport-5.4/751-v5.6-net-mvmdio-avoid-error-message-for-optional-IRQ.patch b/target/linux/generic/backport-5.4/751-v5.6-net-mvmdio-avoid-error-message-for-optional-IRQ.patch
deleted file mode 100644
index 6d51de8372..0000000000
--- a/target/linux/generic/backport-5.4/751-v5.6-net-mvmdio-avoid-error-message-for-optional-IRQ.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From fa2632f74e57bbc869c8ad37751a11b6147a3acc Mon Sep 17 00:00:00 2001
-From: Chris Packham <chris.packham@alliedtelesis.co.nz>
-Date: Mon, 16 Mar 2020 20:49:07 +1300
-Subject: [PATCH] net: mvmdio: avoid error message for optional IRQ
-
-Per the dt-binding the interrupt is optional so use
-platform_get_irq_optional() instead of platform_get_irq(). Since
-commit 7723f4c5ecdb ("driver core: platform: Add an error message to
-platform_get_irq*()") platform_get_irq() produces an error message
-
-  orion-mdio f1072004.mdio: IRQ index 0 not found
-
-which is perfectly normal if one hasn't specified the optional property
-in the device tree.
-
-Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvmdio.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/marvell/mvmdio.c
-+++ b/drivers/net/ethernet/marvell/mvmdio.c
-@@ -347,7 +347,7 @@ static int orion_mdio_probe(struct platf
- 	}
- 
- 
--	dev->err_interrupt = platform_get_irq(pdev, 0);
-+	dev->err_interrupt = platform_get_irq_optional(pdev, 0);
- 	if (dev->err_interrupt > 0 &&
- 	    resource_size(r) < MVMDIO_ERR_INT_MASK + 4) {
- 		dev_err(&pdev->dev,
diff --git a/target/linux/generic/backport-5.4/752-v5.8-net-dsa-provide-an-option-for-drivers-to-always-rece.patch b/target/linux/generic/backport-5.4/752-v5.8-net-dsa-provide-an-option-for-drivers-to-always-rece.patch
deleted file mode 100644
index 52d9351b70..0000000000
--- a/target/linux/generic/backport-5.4/752-v5.8-net-dsa-provide-an-option-for-drivers-to-always-rece.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From 54a0ed0df49609f4e3f098f8943e38e389dc2e15 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 12 May 2020 20:20:25 +0300
-Subject: net: dsa: provide an option for drivers to always receive bridge
- VLANs
-
-DSA assumes that a bridge which has vlan filtering disabled is not
-vlan aware, and ignores all vlan configuration. However, the kernel
-software bridge code allows configuration in this state.
-
-This causes the kernel's idea of the bridge vlan state and the
-hardware state to disagree, so "bridge vlan show" indicates a correct
-configuration but the hardware lacks all configuration. Even worse,
-enabling vlan filtering on a DSA bridge immediately blocks all traffic
-which, given the output of "bridge vlan show", is very confusing.
-
-Provide an option that drivers can set to indicate they want to receive
-vlan configuration even when vlan filtering is disabled. At the very
-least, this is safe for Marvell DSA bridges, which do not look up
-ingress traffic in the VTU if the port is in 8021Q disabled state. It is
-also safe for the Ocelot switch family. Whether this change is suitable
-for all DSA bridges is not known.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/net/dsa.h  |  7 +++++++
- net/dsa/dsa_priv.h |  1 +
- net/dsa/port.c     | 14 ++++++++++++++
- net/dsa/slave.c    |  8 ++++----
- 4 files changed, 26 insertions(+), 4 deletions(-)
-
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -270,6 +270,13 @@ struct dsa_switch {
- 	 */
- 	bool			vlan_filtering_is_global;
- 
-+	/* Pass .port_vlan_add and .port_vlan_del to drivers even for bridges
-+	 * that have vlan_filtering=0. All drivers should ideally set this (and
-+	 * then the option would get removed), but it is unknown whether this
-+	 * would break things or not.
-+	 */
-+	bool			configure_vlan_while_not_filtering;
-+
- 	/* In case vlan_filtering_is_global is set, the VLAN awareness state
- 	 * should be retrieved from here and not from the per-port settings.
- 	 */
---- a/net/dsa/dsa_priv.h
-+++ b/net/dsa/dsa_priv.h
-@@ -139,6 +139,7 @@ int dsa_port_bridge_join(struct dsa_port
- void dsa_port_bridge_leave(struct dsa_port *dp, struct net_device *br);
- int dsa_port_vlan_filtering(struct dsa_port *dp, bool vlan_filtering,
- 			    struct switchdev_trans *trans);
-+bool dsa_port_skip_vlan_configuration(struct dsa_port *dp);
- int dsa_port_ageing_time(struct dsa_port *dp, clock_t ageing_clock,
- 			 struct switchdev_trans *trans);
- int dsa_port_fdb_add(struct dsa_port *dp, const unsigned char *addr,
---- a/net/dsa/port.c
-+++ b/net/dsa/port.c
-@@ -238,6 +238,20 @@ int dsa_port_vlan_filtering(struct dsa_p
- 	return 0;
- }
- 
-+/* This enforces legacy behavior for switch drivers which assume they can't
-+ * receive VLAN configuration when enslaved to a bridge with vlan_filtering=0
-+ */
-+bool dsa_port_skip_vlan_configuration(struct dsa_port *dp)
-+{
-+	struct dsa_switch *ds = dp->ds;
-+
-+	if (!dp->bridge_dev)
-+		return false;
-+
-+	return (!ds->configure_vlan_while_not_filtering &&
-+		!br_vlan_enabled(dp->bridge_dev));
-+}
-+
- int dsa_port_ageing_time(struct dsa_port *dp, clock_t ageing_clock,
- 			 struct switchdev_trans *trans)
- {
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -319,7 +319,7 @@ static int dsa_slave_vlan_add(struct net
- 	if (obj->orig_dev != dev)
- 		return -EOPNOTSUPP;
- 
--	if (dp->bridge_dev && !br_vlan_enabled(dp->bridge_dev))
-+	if (dsa_port_skip_vlan_configuration(dp))
- 		return 0;
- 
- 	vlan = *SWITCHDEV_OBJ_PORT_VLAN(obj);
-@@ -386,7 +386,7 @@ static int dsa_slave_vlan_del(struct net
- 	if (obj->orig_dev != dev)
- 		return -EOPNOTSUPP;
- 
--	if (dp->bridge_dev && !br_vlan_enabled(dp->bridge_dev))
-+	if (dsa_port_skip_vlan_configuration(dp))
- 		return 0;
- 
- 	/* Do not deprogram the CPU port as it may be shared with other user
-@@ -1120,7 +1120,7 @@ static int dsa_slave_vlan_rx_add_vid(str
- 	 * need to emulate the switchdev prepare + commit phase.
- 	 */
- 	if (dp->bridge_dev) {
--		if (!br_vlan_enabled(dp->bridge_dev))
-+		if (dsa_port_skip_vlan_configuration(dp))
- 			return 0;
- 
- 		/* br_vlan_get_info() returns -EINVAL or -ENOENT if the
-@@ -1154,7 +1154,7 @@ static int dsa_slave_vlan_rx_kill_vid(st
- 	 * need to emulate the switchdev prepare + commit phase.
- 	 */
- 	if (dp->bridge_dev) {
--		if (!br_vlan_enabled(dp->bridge_dev))
-+		if (dsa_port_skip_vlan_configuration(dp))
- 			return 0;
- 
- 		/* br_vlan_get_info() returns -EINVAL or -ENOENT if the
diff --git a/target/linux/generic/backport-5.4/753-v5.8-net-dsa-mt7530-fix-VLAN-setup.patch b/target/linux/generic/backport-5.4/753-v5.8-net-dsa-mt7530-fix-VLAN-setup.patch
deleted file mode 100644
index 0804cea9f7..0000000000
--- a/target/linux/generic/backport-5.4/753-v5.8-net-dsa-mt7530-fix-VLAN-setup.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 0141792f8b7300006b874dda1c35acd0abd90d9d Mon Sep 17 00:00:00 2001
-From: DENG Qingfang <dqfext@gmail.com>
-Date: Fri, 15 May 2020 23:25:55 +0800
-Subject: net: dsa: mt7530: fix VLAN setup
-
-Allow DSA to add VLAN entries even if VLAN filtering is disabled, so
-enabling it will not block the traffic of existent ports in the bridge
-
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 13 +------------
- 1 file changed, 1 insertion(+), 12 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1083,12 +1083,6 @@ mt7530_port_vlan_add(struct dsa_switch *
- 	struct mt7530_priv *priv = ds->priv;
- 	u16 vid;
- 
--	/* The port is kept as VLAN-unaware if bridge with vlan_filtering not
--	 * being set.
--	 */
--	if (!dsa_port_is_vlan_filtering(&ds->ports[port]))
--		return;
--
- 	mutex_lock(&priv->reg_mutex);
- 
- 	for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
-@@ -1114,12 +1108,6 @@ mt7530_port_vlan_del(struct dsa_switch *
- 	struct mt7530_priv *priv = ds->priv;
- 	u16 vid, pvid;
- 
--	/* The port is kept as VLAN-unaware if bridge with vlan_filtering not
--	 * being set.
--	 */
--	if (!dsa_port_is_vlan_filtering(&ds->ports[port]))
--		return 0;
--
- 	mutex_lock(&priv->reg_mutex);
- 
- 	pvid = priv->ports[port].pvid;
-@@ -1232,6 +1220,7 @@ mt7530_setup(struct dsa_switch *ds)
- 	 * as two netdev instances.
- 	 */
- 	dn = ds->ports[MT7530_CPU_PORT].master->dev.of_node->parent;
-+	ds->configure_vlan_while_not_filtering = true;
- 
- 	if (priv->id == ID_MT7530) {
- 		regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
diff --git a/target/linux/generic/backport-5.4/756-v5.8-net-dsa-rtl8366-Pass-GENMASK-signed-bits.patch b/target/linux/generic/backport-5.4/756-v5.8-net-dsa-rtl8366-Pass-GENMASK-signed-bits.patch
deleted file mode 100644
index b0ab598365..0000000000
--- a/target/linux/generic/backport-5.4/756-v5.8-net-dsa-rtl8366-Pass-GENMASK-signed-bits.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 733993f502f254912b1415e13f73651d9f2e74ef Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Sun, 5 Jul 2020 22:42:27 +0200
-Subject: [PATCH 1/5] net: dsa: rtl8366: Pass GENMASK() signed bits
-
-Oddly, GENMASK() requires signed bit numbers, so that it can compare
-them for < 0. If passed an unsigned type, we get warnings about the
-test never being true.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/rtl8366.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/dsa/rtl8366.c
-+++ b/drivers/net/dsa/rtl8366.c
-@@ -311,7 +311,7 @@ int rtl8366_init_vlan(struct realtek_smi
- 			/* For the CPU port, make all ports members of this
- 			 * VLAN.
- 			 */
--			mask = GENMASK(smi->num_ports - 1, 0);
-+			mask = GENMASK((int)smi->num_ports - 1, 0);
- 		else
- 			/* For all other ports, enable itself plus the
- 			 * CPU port.
diff --git a/target/linux/generic/backport-5.4/757-v5.8-net-dsa-tag_rtl4_a-Implement-Realtek-4-byte-A-tag.patch b/target/linux/generic/backport-5.4/757-v5.8-net-dsa-tag_rtl4_a-Implement-Realtek-4-byte-A-tag.patch
deleted file mode 100644
index 70d7000ba1..0000000000
--- a/target/linux/generic/backport-5.4/757-v5.8-net-dsa-tag_rtl4_a-Implement-Realtek-4-byte-A-tag.patch
+++ /dev/null
@@ -1,232 +0,0 @@
-From 078ced30af696b52a450a016a16eb47499d68117 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Wed, 8 Jul 2020 14:25:36 +0200
-Subject: [PATCH 2/5] net: dsa: tag_rtl4_a: Implement Realtek 4 byte A tag
-
-This implements the known parts of the Realtek 4 byte
-tag protocol version 0xA, as found in the RTL8366RB
-DSA switch.
-
-It is designated as protocol version 0xA as a
-different Realtek 4 byte tag format with protocol
-version 0x9 is known to exist in the Realtek RTL8306
-chips.
-
-The tag and switch chip lacks public documentation, so
-the tag format has been reverse-engineered from
-packet dumps. As only ingress traffic has been available
-for analysis an egress tag has not been possible to
-develop (even using educated guesses about bit fields)
-so this is as far as it gets. It is not known if the
-switch even supports egress tagging.
-
-Excessive attempts to figure out the egress tag format
-was made. When nothing else worked, I just tried all bit
-combinations with 0xannp where a is protocol and p is
-port. I looped through all values several times trying
-to get a response from ping, without any positive
-result.
-
-Using just these ingress tags however, the switch
-functionality is vastly improved and the packets find
-their way into the destination port without any
-tricky VLAN configuration. On the D-Link DIR-685 the
-LAN ports now come up and respond to ping without
-any command line configuration so this is a real
-improvement for users.
-
-Egress packets need to be restricted to the proper
-target ports using VLAN, which the RTL8366RB DSA
-switch driver already sets up.
-
-Cc: DENG Qingfang <dqfext@gmail.com>
-Cc: Mauri Sandberg <sandberg@mailfence.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/net/dsa.h    |   2 +
- net/dsa/Kconfig      |   7 +++
- net/dsa/Makefile     |   1 +
- net/dsa/tag_rtl4_a.c | 130 +++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 140 insertions(+)
- create mode 100644 net/dsa/tag_rtl4_a.c
-
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -42,6 +42,7 @@ struct phylink_link_state;
- #define DSA_TAG_PROTO_8021Q_VALUE		12
- #define DSA_TAG_PROTO_SJA1105_VALUE		13
- #define DSA_TAG_PROTO_KSZ8795_VALUE		14
-+#define DSA_TAG_PROTO_RTL4_A_VALUE		17
- 
- enum dsa_tag_protocol {
- 	DSA_TAG_PROTO_NONE		= DSA_TAG_PROTO_NONE_VALUE,
-@@ -59,6 +60,7 @@ enum dsa_tag_protocol {
- 	DSA_TAG_PROTO_8021Q		= DSA_TAG_PROTO_8021Q_VALUE,
- 	DSA_TAG_PROTO_SJA1105		= DSA_TAG_PROTO_SJA1105_VALUE,
- 	DSA_TAG_PROTO_KSZ8795		= DSA_TAG_PROTO_KSZ8795_VALUE,
-+	DSA_TAG_PROTO_RTL4_A		= DSA_TAG_PROTO_RTL4_A_VALUE,
- };
- 
- struct packet_type;
---- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -80,6 +80,13 @@ config NET_DSA_TAG_KSZ
- 	  Say Y if you want to enable support for tagging frames for the
- 	  Microchip 8795/9477/9893 families of switches.
- 
-+config NET_DSA_TAG_RTL4_A
-+	tristate "Tag driver for Realtek 4 byte protocol A tags"
-+	help
-+	  Say Y or M if you want to enable support for tagging frames for the
-+	  Realtek switches with 4 byte protocol A tags, sich as found in
-+	  the Realtek RTL8366RB.
-+
- config NET_DSA_TAG_QCA
- 	tristate "Tag driver for Qualcomm Atheros QCA8K switches"
- 	help
---- a/net/dsa/Makefile
-+++ b/net/dsa/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa
- obj-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
- obj-$(CONFIG_NET_DSA_TAG_GSWIP) += tag_gswip.o
- obj-$(CONFIG_NET_DSA_TAG_KSZ) += tag_ksz.o
-+obj-$(CONFIG_NET_DSA_TAG_RTL4_A) += tag_rtl4_a.o
- obj-$(CONFIG_NET_DSA_TAG_LAN9303) += tag_lan9303.o
- obj-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk.o
- obj-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
---- /dev/null
-+++ b/net/dsa/tag_rtl4_a.c
-@@ -0,0 +1,130 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Handler for Realtek 4 byte DSA switch tags
-+ * Currently only supports protocol "A" found in RTL8366RB
-+ * Copyright (c) 2020 Linus Walleij <linus.walleij@linaro.org>
-+ *
-+ * This "proprietary tag" header looks like so:
-+ *
-+ * -------------------------------------------------
-+ * | MAC DA | MAC SA | 0x8899 | 2 bytes tag | Type |
-+ * -------------------------------------------------
-+ *
-+ * The 2 bytes tag form a 16 bit big endian word. The exact
-+ * meaning has been guessed from packet dumps from ingress
-+ * frames, as no working egress traffic has been available
-+ * we do not know the format of the egress tags or if they
-+ * are even supported.
-+ */
-+
-+#include <linux/etherdevice.h>
-+#include <linux/bits.h>
-+
-+#include "dsa_priv.h"
-+
-+#define RTL4_A_HDR_LEN		4
-+#define RTL4_A_ETHERTYPE	0x8899
-+#define RTL4_A_PROTOCOL_SHIFT	12
-+/*
-+ * 0x1 = Realtek Remote Control protocol (RRCP)
-+ * 0x2/0x3 seems to be used for loopback testing
-+ * 0x9 = RTL8306 DSA protocol
-+ * 0xa = RTL8366RB DSA protocol
-+ */
-+#define RTL4_A_PROTOCOL_RTL8366RB	0xa
-+
-+static struct sk_buff *rtl4a_tag_xmit(struct sk_buff *skb,
-+				      struct net_device *dev)
-+{
-+	/*
-+	 * Just let it pass thru, we don't know if it is possible
-+	 * to tag a frame with the 0x8899 ethertype and direct it
-+	 * to a specific port, all attempts at reverse-engineering have
-+	 * ended up with the frames getting dropped.
-+	 *
-+	 * The VLAN set-up needs to restrict the frames to the right port.
-+	 *
-+	 * If you have documentation on the tagging format for RTL8366RB
-+	 * (tag type A) then please contribute.
-+	 */
-+	return skb;
-+}
-+
-+static struct sk_buff *rtl4a_tag_rcv(struct sk_buff *skb,
-+				     struct net_device *dev,
-+				     struct packet_type *pt)
-+{
-+	u16 protport;
-+	__be16 *p;
-+	u16 etype;
-+	u8 *tag;
-+	u8 prot;
-+	u8 port;
-+
-+	if (unlikely(!pskb_may_pull(skb, RTL4_A_HDR_LEN)))
-+		return NULL;
-+
-+	/* The RTL4 header has its own custom Ethertype 0x8899 and that
-+	 * starts right at the beginning of the packet, after the src
-+	 * ethernet addr. Apparantly skb->data always points 2 bytes in,
-+	 * behind the Ethertype.
-+	 */
-+	tag = skb->data - 2;
-+	p = (__be16 *)tag;
-+	etype = ntohs(*p);
-+	if (etype != RTL4_A_ETHERTYPE) {
-+		/* Not custom, just pass through */
-+		netdev_dbg(dev, "non-realtek ethertype 0x%04x\n", etype);
-+		return skb;
-+	}
-+	p = (__be16 *)(tag + 2);
-+	protport = ntohs(*p);
-+	/* The 4 upper bits are the protocol */
-+	prot = (protport >> RTL4_A_PROTOCOL_SHIFT) & 0x0f;
-+	if (prot != RTL4_A_PROTOCOL_RTL8366RB) {
-+		netdev_err(dev, "unknown realtek protocol 0x%01x\n", prot);
-+		return NULL;
-+	}
-+	port = protport & 0xff;
-+
-+	skb->dev = dsa_master_find_slave(dev, 0, port);
-+	if (!skb->dev) {
-+		netdev_dbg(dev, "could not find slave for port %d\n", port);
-+		return NULL;
-+	}
-+
-+	/* Remove RTL4 tag and recalculate checksum */
-+	skb_pull_rcsum(skb, RTL4_A_HDR_LEN);
-+
-+	/* Move ethernet DA and SA in front of the data */
-+	memmove(skb->data - ETH_HLEN,
-+		skb->data - ETH_HLEN - RTL4_A_HDR_LEN,
-+		2 * ETH_ALEN);
-+
-+	skb->offload_fwd_mark = 1;
-+
-+	return skb;
-+}
-+
-+static int rtl4a_tag_flow_dissect(const struct sk_buff *skb, __be16 *proto,
-+				  int *offset)
-+{
-+	*offset = RTL4_A_HDR_LEN;
-+	/* Skip past the tag and fetch the encapsulated Ethertype */
-+	*proto = ((__be16 *)skb->data)[1];
-+
-+	return 0;
-+}
-+
-+static const struct dsa_device_ops rtl4a_netdev_ops = {
-+	.name	= "rtl4a",
-+	.proto	= DSA_TAG_PROTO_RTL4_A,
-+	.xmit	= rtl4a_tag_xmit,
-+	.rcv	= rtl4a_tag_rcv,
-+	.flow_dissect = rtl4a_tag_flow_dissect,
-+	.overhead = RTL4_A_HDR_LEN,
-+};
-+module_dsa_tag_driver(rtl4a_netdev_ops);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_RTL4_A);
diff --git a/target/linux/generic/backport-5.4/758-v5.8-net-dsa-rtl8366rb-Support-the-CPU-DSA-tag.patch b/target/linux/generic/backport-5.4/758-v5.8-net-dsa-rtl8366rb-Support-the-CPU-DSA-tag.patch
deleted file mode 100644
index b68c033bbe..0000000000
--- a/target/linux/generic/backport-5.4/758-v5.8-net-dsa-rtl8366rb-Support-the-CPU-DSA-tag.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From c633ba43b7a9c2bfdb992ffd198d4c661520466f Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Wed, 8 Jul 2020 14:25:37 +0200
-Subject: [PATCH 3/5] net: dsa: rtl8366rb: Support the CPU DSA tag
-
-This activates the support to use the CPU tag to properly
-direct ingress traffic to the right port.
-
-Bit 15 in register RTL8368RB_CPU_CTRL_REG can be set to
-1 to disable the insertion of the CPU tag which is what
-the code currently does. The bit 15 define calls this
-setting RTL8368RB_CPU_INSTAG which is confusing since the
-inverse meaning is implied: programmers may think that
-setting this bit to 1 will *enable* inserting the tag
-rather than disabling it, so rename this setting in
-bit 15 to RTL8368RB_CPU_NO_TAG which is more to the
-point.
-
-After this e.g. ping works out-of-the-box with the
-RTL8366RB.
-
-Cc: DENG Qingfang <dqfext@gmail.com>
-Cc: Mauri Sandberg <sandberg@mailfence.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/Kconfig     |  1 +
- drivers/net/dsa/rtl8366rb.c | 31 ++++++++-----------------------
- 2 files changed, 9 insertions(+), 23 deletions(-)
-
---- a/drivers/net/dsa/Kconfig
-+++ b/drivers/net/dsa/Kconfig
-@@ -66,6 +66,7 @@ config NET_DSA_QCA8K
- config NET_DSA_REALTEK_SMI
- 	tristate "Realtek SMI Ethernet switch family support"
- 	depends on NET_DSA
-+	select NET_DSA_TAG_RTL4_A
- 	select FIXED_PHY
- 	select IRQ_DOMAIN
- 	select REALTEK_PHY
---- a/drivers/net/dsa/rtl8366rb.c
-+++ b/drivers/net/dsa/rtl8366rb.c
-@@ -109,8 +109,8 @@
- /* CPU port control reg */
- #define RTL8368RB_CPU_CTRL_REG		0x0061
- #define RTL8368RB_CPU_PORTS_MSK		0x00FF
--/* Enables inserting custom tag length/type 0x8899 */
--#define RTL8368RB_CPU_INSTAG		BIT(15)
-+/* Disables inserting custom tag length/type 0x8899 */
-+#define RTL8368RB_CPU_NO_TAG		BIT(15)
- 
- #define RTL8366RB_SMAR0			0x0070 /* bits 0..15 */
- #define RTL8366RB_SMAR1			0x0071 /* bits 16..31 */
-@@ -844,16 +844,14 @@ static int rtl8366rb_setup(struct dsa_sw
- 	if (ret)
- 		return ret;
- 
--	/* Enable CPU port and enable inserting CPU tag
-+	/* Enable CPU port with custom DSA tag 8899.
- 	 *
--	 * Disabling RTL8368RB_CPU_INSTAG here will change the behaviour
--	 * of the switch totally and it will start talking Realtek RRCP
--	 * internally. It is probably possible to experiment with this,
--	 * but then the kernel needs to understand and handle RRCP first.
-+	 * If you set RTL8368RB_CPU_NO_TAG (bit 15) in this registers
-+	 * the custom tag is turned off.
- 	 */
- 	ret = regmap_update_bits(smi->map, RTL8368RB_CPU_CTRL_REG,
- 				 0xFFFF,
--				 RTL8368RB_CPU_INSTAG | BIT(smi->cpu_port));
-+				 BIT(smi->cpu_port));
- 	if (ret)
- 		return ret;
- 
-@@ -966,21 +964,8 @@ static int rtl8366rb_setup(struct dsa_sw
- static enum dsa_tag_protocol rtl8366_get_tag_protocol(struct dsa_switch *ds,
- 						      int port)
- {
--	/* For now, the RTL switches are handled without any custom tags.
--	 *
--	 * It is possible to turn on "custom tags" by removing the
--	 * RTL8368RB_CPU_INSTAG flag when enabling the port but what it
--	 * does is unfamiliar to DSA: ethernet frames of type 8899, the Realtek
--	 * Remote Control Protocol (RRCP) start to appear on the CPU port of
--	 * the device. So this is not the ordinary few extra bytes in the
--	 * frame. Instead it appears that the switch starts to talk Realtek
--	 * RRCP internally which means a pretty complex RRCP implementation
--	 * decoding and responding the RRCP protocol is needed to exploit this.
--	 *
--	 * The OpenRRCP project (dormant since 2009) have reverse-egineered
--	 * parts of the protocol.
--	 */
--	return DSA_TAG_PROTO_NONE;
-+	/* This switch uses the 4 byte protocol A Realtek DSA tag */
-+	return DSA_TAG_PROTO_RTL4_A;
- }
- 
- static void rtl8366rb_adjust_link(struct dsa_switch *ds, int port,
diff --git a/target/linux/generic/backport-5.4/760-net-ethernet-mediatek-Integrate-GDM-PSE-setup-operat.patch b/target/linux/generic/backport-5.4/760-net-ethernet-mediatek-Integrate-GDM-PSE-setup-operat.patch
deleted file mode 100644
index e352b0380e..0000000000
--- a/target/linux/generic/backport-5.4/760-net-ethernet-mediatek-Integrate-GDM-PSE-setup-operat.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From: MarkLee <Mark-MC.Lee@mediatek.com>
-Date: Wed, 13 Nov 2019 10:38:42 +0800
-Subject: [PATCH] net: ethernet: mediatek: Integrate GDM/PSE setup operations
-
-Integrate GDM/PSE setup operations into single function "mtk_gdm_config"
-
-Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2232,6 +2232,28 @@ static int mtk_start_dma(struct mtk_eth
- 	return 0;
- }
- 
-+static void mtk_gdm_config(struct mtk_eth *eth, u32 config)
-+{
-+	int i;
-+
-+	for (i = 0; i < MTK_MAC_COUNT; i++) {
-+		u32 val = mtk_r32(eth, MTK_GDMA_FWD_CFG(i));
-+
-+		/* default setup the forward port to send frame to PDMA */
-+		val &= ~0xffff;
-+
-+		/* Enable RX checksum */
-+		val |= MTK_GDMA_ICS_EN | MTK_GDMA_TCS_EN | MTK_GDMA_UCS_EN;
-+
-+		val |= config;
-+
-+		mtk_w32(eth, val, MTK_GDMA_FWD_CFG(i));
-+	}
-+	/* Reset and enable PSE */
-+	mtk_w32(eth, RST_GL_PSE, MTK_RST_GL);
-+	mtk_w32(eth, 0, MTK_RST_GL);
-+}
-+
- static int mtk_open(struct net_device *dev)
- {
- 	struct mtk_mac *mac = netdev_priv(dev);
-@@ -2427,8 +2449,6 @@ static int mtk_hw_init(struct mtk_eth *e
- 	mtk_w32(eth, 0, MTK_QDMA_DELAY_INT);
- 	mtk_tx_irq_disable(eth, ~0);
- 	mtk_rx_irq_disable(eth, ~0);
--	mtk_w32(eth, RST_GL_PSE, MTK_RST_GL);
--	mtk_w32(eth, 0, MTK_RST_GL);
- 
- 	/* FE int grouping */
- 	mtk_w32(eth, MTK_TX_DONE_INT, MTK_PDMA_INT_GRP1);
-@@ -2437,18 +2457,7 @@ static int mtk_hw_init(struct mtk_eth *e
- 	mtk_w32(eth, MTK_RX_DONE_INT, MTK_QDMA_INT_GRP2);
- 	mtk_w32(eth, 0x21021000, MTK_FE_INT_GRP);
- 
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
--		u32 val = mtk_r32(eth, MTK_GDMA_FWD_CFG(i));
--
--		/* setup the forward port to send frame to PDMA */
--		val &= ~0xffff;
--
--		/* Enable RX checksum */
--		val |= MTK_GDMA_ICS_EN | MTK_GDMA_TCS_EN | MTK_GDMA_UCS_EN;
--
--		/* setup the mac dma */
--		mtk_w32(eth, val, MTK_GDMA_FWD_CFG(i));
--	}
-+	mtk_gdm_config(eth, MTK_GDMA_TO_PDMA);
- 
- 	return 0;
- 
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -84,6 +84,7 @@
- #define MTK_GDMA_ICS_EN		BIT(22)
- #define MTK_GDMA_TCS_EN		BIT(21)
- #define MTK_GDMA_UCS_EN		BIT(20)
-+#define MTK_GDMA_TO_PDMA	0x0
- 
- /* Unicast Filter MAC Address Register - Low */
- #define MTK_GDMA_MAC_ADRL(x)	(0x508 + (x * 0x1000))
diff --git a/target/linux/generic/backport-5.4/761-net-ethernet-mediatek-Refine-the-timing-of-GDM-PSE-s.patch b/target/linux/generic/backport-5.4/761-net-ethernet-mediatek-Refine-the-timing-of-GDM-PSE-s.patch
deleted file mode 100644
index d18d9f93eb..0000000000
--- a/target/linux/generic/backport-5.4/761-net-ethernet-mediatek-Refine-the-timing-of-GDM-PSE-s.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: MarkLee <Mark-MC.Lee@mediatek.com>
-Date: Wed, 13 Nov 2019 10:38:43 +0800
-Subject: [PATCH] net: ethernet: mediatek: Refine the timing of GDM/PSE setup
-
-Refine the timing of GDM/PSE setup, move it from mtk_hw_init
-to mtk_open. This is recommended by the mt762x HW design to
-do GDM/PSE setup only after PDMA has been started.
-
-We exclude mt7628 in mtk_gdm_config function since it is a old IP
-and there is no GDM/PSE block on it.
-
-Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2236,6 +2236,9 @@ static void mtk_gdm_config(struct mtk_et
- {
- 	int i;
- 
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628))
-+		return;
-+
- 	for (i = 0; i < MTK_MAC_COUNT; i++) {
- 		u32 val = mtk_r32(eth, MTK_GDMA_FWD_CFG(i));
- 
-@@ -2274,6 +2277,8 @@ static int mtk_open(struct net_device *d
- 		if (err)
- 			return err;
- 
-+		mtk_gdm_config(eth, MTK_GDMA_TO_PDMA);
-+
- 		napi_enable(&eth->tx_napi);
- 		napi_enable(&eth->rx_napi);
- 		mtk_tx_irq_enable(eth, MTK_TX_DONE_INT);
-@@ -2457,8 +2462,6 @@ static int mtk_hw_init(struct mtk_eth *e
- 	mtk_w32(eth, MTK_RX_DONE_INT, MTK_QDMA_INT_GRP2);
- 	mtk_w32(eth, 0x21021000, MTK_FE_INT_GRP);
- 
--	mtk_gdm_config(eth, MTK_GDMA_TO_PDMA);
--
- 	return 0;
- 
- err_disable_pm:
diff --git a/target/linux/generic/backport-5.4/762-net-ethernet-mediatek-Enable-GDM-GDMA_DROP_ALL-mode.patch b/target/linux/generic/backport-5.4/762-net-ethernet-mediatek-Enable-GDM-GDMA_DROP_ALL-mode.patch
deleted file mode 100644
index e25f1211eb..0000000000
--- a/target/linux/generic/backport-5.4/762-net-ethernet-mediatek-Enable-GDM-GDMA_DROP_ALL-mode.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From: MarkLee <Mark-MC.Lee@mediatek.com>
-Date: Wed, 13 Nov 2019 10:38:44 +0800
-Subject: [PATCH] net: ethernet: mediatek: Enable GDM GDMA_DROP_ALL mode
-
-Enable GDM GDMA_DROP_ALL mode to drop all packet during the
-stop operation. This is recommended by the mt762x HW design
-to drop all packet from GMAC before stopping PDMA.
-
-Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2331,6 +2331,8 @@ static int mtk_stop(struct net_device *d
- 	if (!refcount_dec_and_test(&eth->dma_refcnt))
- 		return 0;
- 
-+	mtk_gdm_config(eth, MTK_GDMA_DROP_ALL);
-+
- 	mtk_tx_irq_disable(eth, MTK_TX_DONE_INT);
- 	mtk_rx_irq_disable(eth, MTK_RX_DONE_INT);
- 	napi_disable(&eth->tx_napi);
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -85,6 +85,7 @@
- #define MTK_GDMA_TCS_EN		BIT(21)
- #define MTK_GDMA_UCS_EN		BIT(20)
- #define MTK_GDMA_TO_PDMA	0x0
-+#define MTK_GDMA_DROP_ALL       0x7777
- 
- /* Unicast Filter MAC Address Register - Low */
- #define MTK_GDMA_MAC_ADRL(x)	(0x508 + (x * 0x1000))
diff --git a/target/linux/generic/backport-5.4/765-v5.12-net-dsa-automatically-bring-up-DSA-master-when-openi.patch b/target/linux/generic/backport-5.4/765-v5.12-net-dsa-automatically-bring-up-DSA-master-when-openi.patch
deleted file mode 100644
index 7ec26899f9..0000000000
--- a/target/linux/generic/backport-5.4/765-v5.12-net-dsa-automatically-bring-up-DSA-master-when-openi.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 9d5ef190e5615a7b63af89f88c4106a5bc127974 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Fri, 5 Feb 2021 15:37:10 +0200
-Subject: [PATCH] net: dsa: automatically bring up DSA master when opening user
- port
-
-DSA wants the master interface to be open before the user port is due to
-historical reasons. The promiscuity of interfaces that are down used to
-have issues, as referenced Lennert Buytenhek in commit df02c6ff2e39
-("dsa: fix master interface allmulti/promisc handling").
-
-The bugfix mentioned there, commit b6c40d68ff64 ("net: only invoke
-dev->change_rx_flags when device is UP"), was basically a "don't do
-that" approach to working around the promiscuity while down issue.
-
-Further work done by Vlad Yasevich in commit d2615bf45069 ("net: core:
-Always propagate flag changes to interfaces") has resolved the
-underlying issue, and it is strictly up to the DSA and 8021q drivers
-now, it is no longer mandated by the networking core that the master
-interface must be up when changing its promiscuity.
-
-From DSA's point of view, deciding to error out in dsa_slave_open
-because the master isn't up is
-(a) a bad user experience and
-(b) knocking at an open door.
-Even if there still was an issue with promiscuity while down, DSA could
-still just open the master and avoid it.
-
-Doing it this way has the additional benefit that user space can now
-remove DSA-specific workarounds, like systemd-networkd with BindCarrier:
-https://github.com/systemd/systemd/issues/7478
-
-And we can finally remove one of the 2 bullets in the "Common pitfalls
-using DSA setups" chapter.
-
-Tested with two cascaded DSA switches:
-
-$ ip link set sw0p2 up
-fsl_enetc 0000:00:00.2 eno2: configuring for fixed/internal link mode
-fsl_enetc 0000:00:00.2 eno2: Link is Up - 1Gbps/Full - flow control rx/tx
-mscc_felix 0000:00:00.5 swp0: configuring for fixed/sgmii link mode
-mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Full - flow control off
-8021q: adding VLAN 0 to HW filter on device swp0
-sja1105 spi2.0 sw0p2: configuring for phy/rgmii-id link mode
-IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready
-IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- Documentation/networking/dsa/dsa.rst | 4 ----
- net/dsa/slave.c                      | 7 +++++--
- 2 files changed, 5 insertions(+), 6 deletions(-)
-
---- a/Documentation/networking/dsa/dsa.rst
-+++ b/Documentation/networking/dsa/dsa.rst
-@@ -273,10 +273,6 @@ will not make us go through the switch t
- the Ethernet switch on the other end, expecting a tag will typically drop this
- frame.
- 
--Slave network devices check that the master network device is UP before allowing
--you to administratively bring UP these slave network devices. A common
--configuration mistake is forgetting to bring UP the master network device first.
--
- Interactions with other subsystems
- ==================================
- 
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -70,8 +70,11 @@ static int dsa_slave_open(struct net_dev
- 	struct dsa_port *dp = dsa_slave_to_port(dev);
- 	int err;
- 
--	if (!(master->flags & IFF_UP))
--		return -ENETDOWN;
-+	err = dev_open(master, NULL);
-+	if (err < 0) {
-+		netdev_err(dev, "failed to open master %s\n", master->name);
-+		goto out;
-+	}
- 
- 	if (!ether_addr_equal(dev->dev_addr, master->dev_addr)) {
- 		err = dev_uc_add(master, dev->dev_addr);
diff --git a/target/linux/generic/backport-5.4/770-v5.12-net-bridge-notify-switchdev-of-disappearance-of-old-.patch b/target/linux/generic/backport-5.4/770-v5.12-net-bridge-notify-switchdev-of-disappearance-of-old-.patch
deleted file mode 100644
index df4e74cd96..0000000000
--- a/target/linux/generic/backport-5.4/770-v5.12-net-bridge-notify-switchdev-of-disappearance-of-old-.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From 90dc8fd36078a536671adae884d0b929cce6480a Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Wed, 6 Jan 2021 11:51:30 +0200
-Subject: [PATCH] net: bridge: notify switchdev of disappearance of old FDB
- entry upon migration
-
-Currently the bridge emits atomic switchdev notifications for
-dynamically learnt FDB entries. Monitoring these notifications works
-wonders for switchdev drivers that want to keep their hardware FDB in
-sync with the bridge's FDB.
-
-For example station A wants to talk to station B in the diagram below,
-and we are concerned with the behavior of the bridge on the DUT device:
-
-                   DUT
- +-------------------------------------+
- |                 br0                 |
- | +------+ +------+ +------+ +------+ |
- | |      | |      | |      | |      | |
- | | swp0 | | swp1 | | swp2 | | eth0 | |
- +-------------------------------------+
-      |        |                  |
-  Station A    |                  |
-               |                  |
-         +--+------+--+    +--+------+--+
-         |  |      |  |    |  |      |  |
-         |  | swp0 |  |    |  | swp0 |  |
- Another |  +------+  |    |  +------+  | Another
-  switch |     br0    |    |     br0    | switch
-         |  +------+  |    |  +------+  |
-         |  |      |  |    |  |      |  |
-         |  | swp1 |  |    |  | swp1 |  |
-         +--+------+--+    +--+------+--+
-                                  |
-                              Station B
-
-Interfaces swp0, swp1, swp2 are handled by a switchdev driver that has
-the following property: frames injected from its control interface bypass
-the internal address analyzer logic, and therefore, this hardware does
-not learn from the source address of packets transmitted by the network
-stack through it. So, since bridging between eth0 (where Station B is
-attached) and swp0 (where Station A is attached) is done in software,
-the switchdev hardware will never learn the source address of Station B.
-So the traffic towards that destination will be treated as unknown, i.e.
-flooded.
-
-This is where the bridge notifications come in handy. When br0 on the
-DUT sees frames with Station B's MAC address on eth0, the switchdev
-driver gets these notifications and can install a rule to send frames
-towards Station B's address that are incoming from swp0, swp1, swp2,
-only towards the control interface. This is all switchdev driver private
-business, which the notification makes possible.
-
-All is fine until someone unplugs Station B's cable and moves it to the
-other switch:
-
-                   DUT
- +-------------------------------------+
- |                 br0                 |
- | +------+ +------+ +------+ +------+ |
- | |      | |      | |      | |      | |
- | | swp0 | | swp1 | | swp2 | | eth0 | |
- +-------------------------------------+
-      |        |                  |
-  Station A    |                  |
-               |                  |
-         +--+------+--+    +--+------+--+
-         |  |      |  |    |  |      |  |
-         |  | swp0 |  |    |  | swp0 |  |
- Another |  +------+  |    |  +------+  | Another
-  switch |     br0    |    |     br0    | switch
-         |  +------+  |    |  +------+  |
-         |  |      |  |    |  |      |  |
-         |  | swp1 |  |    |  | swp1 |  |
-         +--+------+--+    +--+------+--+
-               |
-           Station B
-
-Luckily for the use cases we care about, Station B is noisy enough that
-the DUT hears it (on swp1 this time). swp1 receives the frames and
-delivers them to the bridge, who enters the unlikely path in br_fdb_update
-of updating an existing entry. It moves the entry in the software bridge
-to swp1 and emits an addition notification towards that.
-
-As far as the switchdev driver is concerned, all that it needs to ensure
-is that traffic between Station A and Station B is not forever broken.
-If it does nothing, then the stale rule to send frames for Station B
-towards the control interface remains in place. But Station B is no
-longer reachable via the control interface, but via a port that can
-offload the bridge port learning attribute. It's just that the port is
-prevented from learning this address, since the rule overrides FDB
-updates. So the rule needs to go. The question is via what mechanism.
-
-It sure would be possible for this switchdev driver to keep track of all
-addresses which are sent to the control interface, and then also listen
-for bridge notifier events on its own ports, searching for the ones that
-have a MAC address which was previously sent to the control interface.
-But this is cumbersome and inefficient. Instead, with one small change,
-the bridge could notify of the address deletion from the old port, in a
-symmetrical manner with how it did for the insertion. Then the switchdev
-driver would not be required to monitor learn/forget events for its own
-ports. It could just delete the rule towards the control interface upon
-bridge entry migration. This would make hardware address learning be
-possible again. Then it would take a few more packets until the hardware
-and software FDB would be in sync again.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
-Reviewed-by: Ido Schimmel <idosch@nvidia.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- net/bridge/br_fdb.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/net/bridge/br_fdb.c
-+++ b/net/bridge/br_fdb.c
-@@ -581,6 +581,7 @@ void br_fdb_update(struct net_bridge *br
- 
- 			/* fastpath: update of existing entry */
- 			if (unlikely(source != fdb->dst && !fdb->is_sticky)) {
-+				br_switchdev_fdb_notify(fdb, RTM_DELNEIGH);
- 				fdb->dst = source;
- 				fdb_modified = true;
- 				/* Take over HW learned entry */
diff --git a/target/linux/generic/backport-5.4/771-mdio-bus-add-generic-find-bus.patch b/target/linux/generic/backport-5.4/771-mdio-bus-add-generic-find-bus.patch
deleted file mode 100644
index b79fa0f18a..0000000000
--- a/target/linux/generic/backport-5.4/771-mdio-bus-add-generic-find-bus.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From ce69e2162f158d9d4a0e513971d02dabc7d14cb7 Mon Sep 17 00:00:00 2001
-From: Jeremy Linton <jeremy.linton@arm.com>
-Date: Mon, 24 Feb 2020 16:53:58 -0600
-Subject: [PATCH] mdio_bus: Add generic mdio_find_bus()
-
-It appears most ethernet drivers follow one of two main strategies
-for mdio bus/phy management. A monolithic model where the net driver
-itself creates, probes and uses the phy, and one where an external
-mdio/phy driver instantiates the mdio bus/phy and the net driver
-only attaches to a known phy. Usually in this latter model the phys
-are discovered via DT relationships or simply phy name/address
-hardcoding.
-
-This is a shame because modern well behaved mdio buses are self
-describing and can be probed. The mdio layer itself is fully capable
-of this, yet there isn't a clean way for a standalone net driver
-to attach and enumerate the discovered devices. This is because
-outside of of_mdio_find_bus() there isn't a straightforward way
-to acquire the mii_bus pointer.
-
-So, lets add a mdio_find_bus which can return the mii_bus based
-only on its name.
-
-Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/mdio_bus.c | 17 +++++++++++++++++
- include/linux/phy.h        |  1 +
- 2 files changed, 18 insertions(+)
-
---- a/drivers/net/phy/mdio_bus.c
-+++ b/drivers/net/phy/mdio_bus.c
-@@ -260,6 +260,23 @@ static struct class mdio_bus_class = {
- 	.dev_release	= mdiobus_release,
- };
- 
-+/**
-+ * mdio_find_bus - Given the name of a mdiobus, find the mii_bus.
-+ * @mdio_bus_np: Pointer to the mii_bus.
-+ *
-+ * Returns a reference to the mii_bus, or NULL if none found.  The
-+ * embedded struct device will have its reference count incremented,
-+ * and this must be put_deviced'ed once the bus is finished with.
-+ */
-+struct mii_bus *mdio_find_bus(const char *mdio_name)
-+{
-+	struct device *d;
-+
-+	d = class_find_device_by_name(&mdio_bus_class, mdio_name);
-+	return d ? to_mii_bus(d) : NULL;
-+}
-+EXPORT_SYMBOL(mdio_find_bus);
-+
- #if IS_ENABLED(CONFIG_OF_MDIO)
- /**
-  * of_mdio_find_bus - Given an mii_bus node, find the mii_bus.
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -273,6 +273,7 @@ static inline struct mii_bus *devm_mdiob
- 	return devm_mdiobus_alloc_size(dev, 0);
- }
- 
-+struct mii_bus *mdio_find_bus(const char *mdio_name);
- void devm_mdiobus_free(struct device *dev, struct mii_bus *bus);
- struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
- 
diff --git a/target/linux/generic/backport-5.4/771-v5.12-net-dsa-be-louder-when-a-non-legacy-FDB-operation-fa.patch b/target/linux/generic/backport-5.4/771-v5.12-net-dsa-be-louder-when-a-non-legacy-FDB-operation-fa.patch
deleted file mode 100644
index 893eb719ca..0000000000
--- a/target/linux/generic/backport-5.4/771-v5.12-net-dsa-be-louder-when-a-non-legacy-FDB-operation-fa.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 2fd186501b1cff155cc4a755c210793cfc0dffb5 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Wed, 6 Jan 2021 11:51:31 +0200
-Subject: [PATCH] net: dsa: be louder when a non-legacy FDB operation fails
-
-The dev_close() call was added in commit c9eb3e0f8701 ("net: dsa: Add
-support for learning FDB through notification") "to indicate inconsistent
-situation" when we could not delete an FDB entry from the port.
-
-bridge fdb del d8:58:d7:00:ca:6d dev swp0 self master
-
-It is a bit drastic and at the same time not helpful if the above fails
-to only print with netdev_dbg log level, but on the other hand to bring
-the interface down.
-
-So increase the verbosity of the error message, and drop dev_close().
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- net/dsa/slave.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -1593,7 +1593,9 @@ static void dsa_slave_switchdev_event_wo
- 
- 		err = dsa_port_fdb_add(dp, fdb_info->addr, fdb_info->vid);
- 		if (err) {
--			netdev_dbg(dev, "fdb add failed err=%d\n", err);
-+			netdev_err(dev,
-+				   "failed to add %pM vid %d to fdb: %d\n",
-+				   fdb_info->addr, fdb_info->vid, err);
- 			break;
- 		}
- 		fdb_info->offloaded = true;
-@@ -1608,9 +1610,11 @@ static void dsa_slave_switchdev_event_wo
- 
- 		err = dsa_port_fdb_del(dp, fdb_info->addr, fdb_info->vid);
- 		if (err) {
--			netdev_dbg(dev, "fdb del failed err=%d\n", err);
--			dev_close(dev);
-+			netdev_err(dev,
-+				   "failed to delete %pM vid %d from fdb: %d\n",
-+				   fdb_info->addr, fdb_info->vid, err);
- 		}
-+
- 		break;
- 	}
- 	rtnl_unlock();
diff --git a/target/linux/generic/backport-5.4/772-v5.12-net-dsa-don-t-use-switchdev_notifier_fdb_info-in-dsa.patch b/target/linux/generic/backport-5.4/772-v5.12-net-dsa-don-t-use-switchdev_notifier_fdb_info-in-dsa.patch
deleted file mode 100644
index 275870d19f..0000000000
--- a/target/linux/generic/backport-5.4/772-v5.12-net-dsa-don-t-use-switchdev_notifier_fdb_info-in-dsa.patch
+++ /dev/null
@@ -1,226 +0,0 @@
-From c4bb76a9a0ef87c4cc1f636defed5f12deb9f5a7 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Wed, 6 Jan 2021 11:51:32 +0200
-Subject: [PATCH] net: dsa: don't use switchdev_notifier_fdb_info in
- dsa_switchdev_event_work
-
-Currently DSA doesn't add FDB entries on the CPU port, because it only
-does so through switchdev, which is associated with a net_device, and
-there are none of those for the CPU port.
-
-But actually FDB addresses on the CPU port have some use cases of their
-own, if the switchdev operations are initiated from within the DSA
-layer. There is just one problem with the existing code: it passes a
-structure in dsa_switchdev_event_work which was retrieved directly from
-switchdev, so it contains a net_device. We need to generalize the
-contents to something that covers the CPU port as well: the "ds, port"
-tuple is fine for that.
-
-Note that the new procedure for notifying the successful FDB offload is
-inspired from the rocker model.
-
-Also, nothing was being done if added_by_user was false. Let's check for
-that a lot earlier, and don't actually bother to schedule the worker
-for nothing.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- net/dsa/dsa_priv.h |  12 +++++
- net/dsa/slave.c    | 106 ++++++++++++++++++++++-----------------------
- 2 files changed, 65 insertions(+), 53 deletions(-)
-
---- a/net/dsa/dsa_priv.h
-+++ b/net/dsa/dsa_priv.h
-@@ -62,6 +62,18 @@ struct dsa_notifier_vlan_info {
- 	int port;
- };
- 
-+struct dsa_switchdev_event_work {
-+	struct dsa_switch *ds;
-+	int port;
-+	struct work_struct work;
-+	unsigned long event;
-+	/* Specific for SWITCHDEV_FDB_ADD_TO_DEVICE and
-+	 * SWITCHDEV_FDB_DEL_TO_DEVICE
-+	 */
-+	unsigned char addr[ETH_ALEN];
-+	u16 vid;
-+};
-+
- struct dsa_slave_priv {
- 	/* Copy of CPU port xmit for faster access in slave transmit hot path */
- 	struct sk_buff *	(*xmit)(struct sk_buff *skb,
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -1568,76 +1568,66 @@ static int dsa_slave_netdevice_event(str
- 	return NOTIFY_DONE;
- }
- 
--struct dsa_switchdev_event_work {
--	struct work_struct work;
--	struct switchdev_notifier_fdb_info fdb_info;
--	struct net_device *dev;
--	unsigned long event;
--};
-+static void
-+dsa_fdb_offload_notify(struct dsa_switchdev_event_work *switchdev_work)
-+{
-+	struct dsa_switch *ds = switchdev_work->ds;
-+	struct switchdev_notifier_fdb_info info;
-+	struct dsa_port *dp;
-+
-+	if (!dsa_is_user_port(ds, switchdev_work->port))
-+		return;
-+
-+	info.addr = switchdev_work->addr;
-+	info.vid = switchdev_work->vid;
-+	info.offloaded = true;
-+	dp = dsa_to_port(ds, switchdev_work->port);
-+	call_switchdev_notifiers(SWITCHDEV_FDB_OFFLOADED,
-+				 dp->slave, &info.info, NULL);
-+}
- 
- static void dsa_slave_switchdev_event_work(struct work_struct *work)
- {
- 	struct dsa_switchdev_event_work *switchdev_work =
- 		container_of(work, struct dsa_switchdev_event_work, work);
--	struct net_device *dev = switchdev_work->dev;
--	struct switchdev_notifier_fdb_info *fdb_info;
--	struct dsa_port *dp = dsa_slave_to_port(dev);
-+	struct dsa_switch *ds = switchdev_work->ds;
-+	struct dsa_port *dp;
- 	int err;
- 
-+	dp = dsa_to_port(ds, switchdev_work->port);
-+
- 	rtnl_lock();
- 	switch (switchdev_work->event) {
- 	case SWITCHDEV_FDB_ADD_TO_DEVICE:
--		fdb_info = &switchdev_work->fdb_info;
--		if (!fdb_info->added_by_user)
--			break;
--
--		err = dsa_port_fdb_add(dp, fdb_info->addr, fdb_info->vid);
-+		err = dsa_port_fdb_add(dp, switchdev_work->addr,
-+				       switchdev_work->vid);
- 		if (err) {
--			netdev_err(dev,
--				   "failed to add %pM vid %d to fdb: %d\n",
--				   fdb_info->addr, fdb_info->vid, err);
-+			dev_err(ds->dev,
-+				"port %d failed to add %pM vid %d to fdb: %d\n",
-+				dp->index, switchdev_work->addr,
-+				switchdev_work->vid, err);
- 			break;
- 		}
--		fdb_info->offloaded = true;
--		call_switchdev_notifiers(SWITCHDEV_FDB_OFFLOADED, dev,
--					 &fdb_info->info, NULL);
-+		dsa_fdb_offload_notify(switchdev_work);
- 		break;
- 
- 	case SWITCHDEV_FDB_DEL_TO_DEVICE:
--		fdb_info = &switchdev_work->fdb_info;
--		if (!fdb_info->added_by_user)
--			break;
--
--		err = dsa_port_fdb_del(dp, fdb_info->addr, fdb_info->vid);
-+		err = dsa_port_fdb_del(dp, switchdev_work->addr,
-+				       switchdev_work->vid);
- 		if (err) {
--			netdev_err(dev,
--				   "failed to delete %pM vid %d from fdb: %d\n",
--				   fdb_info->addr, fdb_info->vid, err);
-+			dev_err(ds->dev,
-+				"port %d failed to delete %pM vid %d from fdb: %d\n",
-+				dp->index, switchdev_work->addr,
-+				switchdev_work->vid, err);
- 		}
- 
- 		break;
- 	}
- 	rtnl_unlock();
- 
--	kfree(switchdev_work->fdb_info.addr);
- 	kfree(switchdev_work);
--	dev_put(dev);
--}
--
--static int
--dsa_slave_switchdev_fdb_work_init(struct dsa_switchdev_event_work *
--				  switchdev_work,
--				  const struct switchdev_notifier_fdb_info *
--				  fdb_info)
--{
--	memcpy(&switchdev_work->fdb_info, fdb_info,
--	       sizeof(switchdev_work->fdb_info));
--	switchdev_work->fdb_info.addr = kzalloc(ETH_ALEN, GFP_ATOMIC);
--	if (!switchdev_work->fdb_info.addr)
--		return -ENOMEM;
--	ether_addr_copy((u8 *)switchdev_work->fdb_info.addr,
--			fdb_info->addr);
--	return 0;
-+	if (dsa_is_user_port(ds, dp->index))
-+		dev_put(dp->slave);
- }
- 
- /* Called under rcu_read_lock() */
-@@ -1645,7 +1635,9 @@ static int dsa_slave_switchdev_event(str
- 				     unsigned long event, void *ptr)
- {
- 	struct net_device *dev = switchdev_notifier_info_to_dev(ptr);
-+	const struct switchdev_notifier_fdb_info *fdb_info;
- 	struct dsa_switchdev_event_work *switchdev_work;
-+	struct dsa_port *dp;
- 	int err;
- 
- 	if (event == SWITCHDEV_PORT_ATTR_SET) {
-@@ -1658,20 +1650,32 @@ static int dsa_slave_switchdev_event(str
- 	if (!dsa_slave_dev_check(dev))
- 		return NOTIFY_DONE;
- 
-+	dp = dsa_slave_to_port(dev);
-+
- 	switchdev_work = kzalloc(sizeof(*switchdev_work), GFP_ATOMIC);
- 	if (!switchdev_work)
- 		return NOTIFY_BAD;
- 
- 	INIT_WORK(&switchdev_work->work,
- 		  dsa_slave_switchdev_event_work);
--	switchdev_work->dev = dev;
-+	switchdev_work->ds = dp->ds;
-+	switchdev_work->port = dp->index;
- 	switchdev_work->event = event;
- 
- 	switch (event) {
- 	case SWITCHDEV_FDB_ADD_TO_DEVICE: /* fall through */
- 	case SWITCHDEV_FDB_DEL_TO_DEVICE:
--		if (dsa_slave_switchdev_fdb_work_init(switchdev_work, ptr))
--			goto err_fdb_work_init;
-+		fdb_info = ptr;
-+
-+		if (!fdb_info->added_by_user) {
-+			kfree(switchdev_work);
-+			return NOTIFY_OK;
-+		}
-+
-+		ether_addr_copy(switchdev_work->addr,
-+				fdb_info->addr);
-+		switchdev_work->vid = fdb_info->vid;
-+
- 		dev_hold(dev);
- 		break;
- 	default:
-@@ -1681,10 +1685,6 @@ static int dsa_slave_switchdev_event(str
- 
- 	dsa_schedule_work(&switchdev_work->work);
- 	return NOTIFY_OK;
--
--err_fdb_work_init:
--	kfree(switchdev_work);
--	return NOTIFY_BAD;
- }
- 
- static int dsa_slave_switchdev_blocking_event(struct notifier_block *unused,
diff --git a/target/linux/generic/backport-5.4/773-v5.12-net-dsa-move-switchdev-event-implementation-under-th.patch b/target/linux/generic/backport-5.4/773-v5.12-net-dsa-move-switchdev-event-implementation-under-th.patch
deleted file mode 100644
index b70986fcc1..0000000000
--- a/target/linux/generic/backport-5.4/773-v5.12-net-dsa-move-switchdev-event-implementation-under-th.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 447d290a58bd335d68f665713842365d3d6447df Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Wed, 6 Jan 2021 11:51:33 +0200
-Subject: [PATCH] net: dsa: move switchdev event implementation under the same
- switch/case statement
-
-We'll need to start listening to SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE
-events even for interfaces where dsa_slave_dev_check returns false, so
-we need that check inside the switch-case statement for SWITCHDEV_FDB_*.
-
-This movement also avoids a useless allocation / free of switchdev_work
-on the untreated "default event" case.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- net/dsa/slave.c | 35 ++++++++++++++++-------------------
- 1 file changed, 16 insertions(+), 19 deletions(-)
-
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -1640,31 +1640,29 @@ static int dsa_slave_switchdev_event(str
- 	struct dsa_port *dp;
- 	int err;
- 
--	if (event == SWITCHDEV_PORT_ATTR_SET) {
-+	switch (event) {
-+	case SWITCHDEV_PORT_ATTR_SET:
- 		err = switchdev_handle_port_attr_set(dev, ptr,
- 						     dsa_slave_dev_check,
- 						     dsa_slave_port_attr_set);
- 		return notifier_from_errno(err);
--	}
--
--	if (!dsa_slave_dev_check(dev))
--		return NOTIFY_DONE;
-+	case SWITCHDEV_FDB_ADD_TO_DEVICE:
-+	case SWITCHDEV_FDB_DEL_TO_DEVICE:
-+		if (!dsa_slave_dev_check(dev))
-+			return NOTIFY_DONE;
- 
--	dp = dsa_slave_to_port(dev);
-+		dp = dsa_slave_to_port(dev);
- 
--	switchdev_work = kzalloc(sizeof(*switchdev_work), GFP_ATOMIC);
--	if (!switchdev_work)
--		return NOTIFY_BAD;
--
--	INIT_WORK(&switchdev_work->work,
--		  dsa_slave_switchdev_event_work);
--	switchdev_work->ds = dp->ds;
--	switchdev_work->port = dp->index;
--	switchdev_work->event = event;
-+		switchdev_work = kzalloc(sizeof(*switchdev_work), GFP_ATOMIC);
-+		if (!switchdev_work)
-+			return NOTIFY_BAD;
-+
-+		INIT_WORK(&switchdev_work->work,
-+			  dsa_slave_switchdev_event_work);
-+		switchdev_work->ds = dp->ds;
-+		switchdev_work->port = dp->index;
-+		switchdev_work->event = event;
- 
--	switch (event) {
--	case SWITCHDEV_FDB_ADD_TO_DEVICE: /* fall through */
--	case SWITCHDEV_FDB_DEL_TO_DEVICE:
- 		fdb_info = ptr;
- 
- 		if (!fdb_info->added_by_user) {
-@@ -1677,13 +1675,12 @@ static int dsa_slave_switchdev_event(str
- 		switchdev_work->vid = fdb_info->vid;
- 
- 		dev_hold(dev);
-+		dsa_schedule_work(&switchdev_work->work);
- 		break;
- 	default:
--		kfree(switchdev_work);
- 		return NOTIFY_DONE;
- 	}
- 
--	dsa_schedule_work(&switchdev_work->work);
- 	return NOTIFY_OK;
- }
- 
diff --git a/target/linux/generic/backport-5.4/774-v5.12-net-dsa-exit-early-in-dsa_slave_switchdev_event-if-w.patch b/target/linux/generic/backport-5.4/774-v5.12-net-dsa-exit-early-in-dsa_slave_switchdev_event-if-w.patch
deleted file mode 100644
index c7ed4064e8..0000000000
--- a/target/linux/generic/backport-5.4/774-v5.12-net-dsa-exit-early-in-dsa_slave_switchdev_event-if-w.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 5fb4a451a87d8ed3363d28b63a3295399373d6c4 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Wed, 6 Jan 2021 11:51:34 +0200
-Subject: [PATCH] net: dsa: exit early in dsa_slave_switchdev_event if we can't
- program the FDB
-
-Right now, the following would happen for a switch driver that does not
-implement .port_fdb_add or .port_fdb_del.
-
-dsa_slave_switchdev_event returns NOTIFY_OK and schedules:
--> dsa_slave_switchdev_event_work
-   -> dsa_port_fdb_add
-      -> dsa_port_notify(DSA_NOTIFIER_FDB_ADD)
-         -> dsa_switch_fdb_add
-            -> if (!ds->ops->port_fdb_add) return -EOPNOTSUPP;
-   -> an error is printed with dev_dbg, and
-      dsa_fdb_offload_notify(switchdev_work) is not called.
-
-We can avoid scheduling the worker for nothing and say NOTIFY_DONE.
-Because we don't call dsa_fdb_offload_notify, the static FDB entry will
-remain just in the software bridge.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- net/dsa/slave.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -1653,6 +1653,9 @@ static int dsa_slave_switchdev_event(str
- 
- 		dp = dsa_slave_to_port(dev);
- 
-+		if (!dp->ds->ops->port_fdb_add || !dp->ds->ops->port_fdb_del)
-+			return NOTIFY_DONE;
-+
- 		switchdev_work = kzalloc(sizeof(*switchdev_work), GFP_ATOMIC);
- 		if (!switchdev_work)
- 			return NOTIFY_BAD;
diff --git a/target/linux/generic/backport-5.4/775-v5.12-net-dsa-listen-for-SWITCHDEV_-FDB-DEL-_ADD_TO_DEVICE.patch b/target/linux/generic/backport-5.4/775-v5.12-net-dsa-listen-for-SWITCHDEV_-FDB-DEL-_ADD_TO_DEVICE.patch
deleted file mode 100644
index e4ed6e808f..0000000000
--- a/target/linux/generic/backport-5.4/775-v5.12-net-dsa-listen-for-SWITCHDEV_-FDB-DEL-_ADD_TO_DEVICE.patch
+++ /dev/null
@@ -1,263 +0,0 @@
-From d5f19486cee79d04c054427577ac96ed123706db Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Wed, 6 Jan 2021 11:51:35 +0200
-Subject: [PATCH] net: dsa: listen for SWITCHDEV_{FDB,DEL}_ADD_TO_DEVICE on
- foreign bridge neighbors
-
-Some DSA switches (and not only) cannot learn source MAC addresses from
-packets injected from the CPU. They only perform hardware address
-learning from inbound traffic.
-
-This can be problematic when we have a bridge spanning some DSA switch
-ports and some non-DSA ports (which we'll call "foreign interfaces" from
-DSA's perspective).
-
-There are 2 classes of problems created by the lack of learning on
-CPU-injected traffic:
-- excessive flooding, due to the fact that DSA treats those addresses as
-  unknown
-- the risk of stale routes, which can lead to temporary packet loss
-
-To illustrate the second class, consider the following situation, which
-is common in production equipment (wireless access points, where there
-is a WLAN interface and an Ethernet switch, and these form a single
-bridging domain).
-
- AP 1:
- +------------------------------------------------------------------------+
- |                                          br0                           |
- +------------------------------------------------------------------------+
- +------------+ +------------+ +------------+ +------------+ +------------+
- |    swp0    | |    swp1    | |    swp2    | |    swp3    | |    wlan0   |
- +------------+ +------------+ +------------+ +------------+ +------------+
-       |                                                       ^        ^
-       |                                                       |        |
-       |                                                       |        |
-       |                                                    Client A  Client B
-       |
-       |
-       |
- +------------+ +------------+ +------------+ +------------+ +------------+
- |    swp0    | |    swp1    | |    swp2    | |    swp3    | |    wlan0   |
- +------------+ +------------+ +------------+ +------------+ +------------+
- +------------------------------------------------------------------------+
- |                                          br0                           |
- +------------------------------------------------------------------------+
- AP 2
-
-- br0 of AP 1 will know that Clients A and B are reachable via wlan0
-- the hardware fdb of a DSA switch driver today is not kept in sync with
-  the software entries on other bridge ports, so it will not know that
-  clients A and B are reachable via the CPU port UNLESS the hardware
-  switch itself performs SA learning from traffic injected from the CPU.
-  Nonetheless, a substantial number of switches don't.
-- the hardware fdb of the DSA switch on AP 2 may autonomously learn that
-  Client A and B are reachable through swp0. Therefore, the software br0
-  of AP 2 also may or may not learn this. In the example we're
-  illustrating, some Ethernet traffic has been going on, and br0 from AP
-  2 has indeed learnt that it can reach Client B through swp0.
-
-One of the wireless clients, say Client B, disconnects from AP 1 and
-roams to AP 2. The topology now looks like this:
-
- AP 1:
- +------------------------------------------------------------------------+
- |                                          br0                           |
- +------------------------------------------------------------------------+
- +------------+ +------------+ +------------+ +------------+ +------------+
- |    swp0    | |    swp1    | |    swp2    | |    swp3    | |    wlan0   |
- +------------+ +------------+ +------------+ +------------+ +------------+
-       |                                                            ^
-       |                                                            |
-       |                                                         Client A
-       |
-       |
-       |                                                         Client B
-       |                                                            |
-       |                                                            v
- +------------+ +------------+ +------------+ +------------+ +------------+
- |    swp0    | |    swp1    | |    swp2    | |    swp3    | |    wlan0   |
- +------------+ +------------+ +------------+ +------------+ +------------+
- +------------------------------------------------------------------------+
- |                                          br0                           |
- +------------------------------------------------------------------------+
- AP 2
-
-- br0 of AP 1 still knows that Client A is reachable via wlan0 (no change)
-- br0 of AP 1 will (possibly) know that Client B has left wlan0. There
-  are cases where it might never find out though. Either way, DSA today
-  does not process that notification in any way.
-- the hardware FDB of the DSA switch on AP 1 may learn autonomously that
-  Client B can be reached via swp0, if it receives any packet with
-  Client 1's source MAC address over Ethernet.
-- the hardware FDB of the DSA switch on AP 2 still thinks that Client B
-  can be reached via swp0. It does not know that it has roamed to wlan0,
-  because it doesn't perform SA learning from the CPU port.
-
-Now Client A contacts Client B.
-AP 1 routes the packet fine towards swp0 and delivers it on the Ethernet
-segment.
-AP 2 sees a frame on swp0 and its fdb says that the destination is swp0.
-Hairpinning is disabled => drop.
-
-This problem comes from the fact that these switches have a 'blind spot'
-for addresses coming from software bridging. The generic solution is not
-to assume that hardware learning can be enabled somehow, but to listen
-to more bridge learning events. It turns out that the bridge driver does
-learn in software from all inbound frames, in __br_handle_local_finish.
-A proper SWITCHDEV_FDB_ADD_TO_DEVICE notification is emitted for the
-addresses serviced by the bridge on 'foreign' interfaces. The software
-bridge also does the right thing on migration, by notifying that the old
-entry is deleted, so that does not need to be special-cased in DSA. When
-it is deleted, we just need to delete our static FDB entry towards the
-CPU too, and wait.
-
-The problem is that DSA currently only cares about SWITCHDEV_FDB_ADD_TO_DEVICE
-events received on its own interfaces, such as static FDB entries.
-
-Luckily we can change that, and DSA can listen to all switchdev FDB
-add/del events in the system and figure out if those events were emitted
-by a bridge that spans at least one of DSA's own ports. In case that is
-true, DSA will also offload that address towards its own CPU port, in
-the eventuality that there might be bridge clients attached to the DSA
-switch who want to talk to the station connected to the foreign
-interface.
-
-In terms of implementation, we need to keep the fdb_info->added_by_user
-check for the case where the switchdev event was targeted directly at a
-DSA switch port. But we don't need to look at that flag for snooped
-events. So the check is currently too late, we need to move it earlier.
-This also simplifies the code a bit, since we avoid uselessly allocating
-and freeing switchdev_work.
-
-We could probably do some improvements in the future. For example,
-multi-bridge support is rudimentary at the moment. If there are two
-bridges spanning a DSA switch's ports, and both of them need to service
-the same MAC address, then what will happen is that the migration of one
-of those stations will trigger the deletion of the FDB entry from the
-CPU port while it is still used by other bridge. That could be improved
-with reference counting but is left for another time.
-
-This behavior needs to be enabled at driver level by setting
-ds->assisted_learning_on_cpu_port = true. This is because we don't want
-to inflict a potential performance penalty (accesses through
-MDIO/I2C/SPI are expensive) to hardware that really doesn't need it
-because address learning on the CPU port works there.
-
-Reported-by: DENG Qingfang <dqfext@gmail.com>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-[Backported to linux-5.4.y]
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
----
- include/net/dsa.h |  5 ++++
- net/dsa/slave.c   | 63 ++++++++++++++++++++++++++++++++++++++---------
- 2 files changed, 57 insertions(+), 11 deletions(-)
-
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -279,6 +279,11 @@ struct dsa_switch {
- 	 */
- 	bool			configure_vlan_while_not_filtering;
- 
-+	/* Let DSA manage the FDB entries towards the CPU, based on the
-+	 * software bridge database.
-+	 */
-+	bool			assisted_learning_on_cpu_port;
-+
- 	/* In case vlan_filtering_is_global is set, the VLAN awareness state
- 	 * should be retrieved from here and not from the per-port settings.
- 	 */
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -1630,6 +1630,25 @@ static void dsa_slave_switchdev_event_wo
- 		dev_put(dp->slave);
- }
- 
-+static int dsa_lower_dev_walk(struct net_device *lower_dev, void *data)
-+{
-+	if (dsa_slave_dev_check(lower_dev)) {
-+		*((void **)data) = (void *)netdev_priv(lower_dev);
-+		return 1;
-+	}
-+
-+	return 0;
-+}
-+
-+static struct dsa_slave_priv *dsa_slave_dev_lower_find(struct net_device *dev)
-+{
-+	struct dsa_slave_priv *data = NULL;
-+
-+	netdev_walk_all_lower_dev_rcu(dev, dsa_lower_dev_walk, (void **) &data);
-+
-+	return data;
-+}
-+
- /* Called under rcu_read_lock() */
- static int dsa_slave_switchdev_event(struct notifier_block *unused,
- 				     unsigned long event, void *ptr)
-@@ -1648,10 +1667,37 @@ static int dsa_slave_switchdev_event(str
- 		return notifier_from_errno(err);
- 	case SWITCHDEV_FDB_ADD_TO_DEVICE:
- 	case SWITCHDEV_FDB_DEL_TO_DEVICE:
--		if (!dsa_slave_dev_check(dev))
--			return NOTIFY_DONE;
-+		fdb_info = ptr;
-+
-+		if (dsa_slave_dev_check(dev)) {
-+			if (!fdb_info->added_by_user)
-+				return NOTIFY_OK;
-+
-+			dp = dsa_slave_to_port(dev);
-+		} else {
-+			/* Snoop addresses learnt on foreign interfaces
-+			 * bridged with us, for switches that don't
-+			 * automatically learn SA from CPU-injected traffic
-+			 */
-+			struct net_device *br_dev;
-+			struct dsa_slave_priv *p;
-+
-+			br_dev = netdev_master_upper_dev_get_rcu(dev);
-+			if (!br_dev)
-+				return NOTIFY_DONE;
-+
-+			if (!netif_is_bridge_master(br_dev))
-+				return NOTIFY_DONE;
-+
-+			p = dsa_slave_dev_lower_find(br_dev);
-+			if (!p)
-+				return NOTIFY_DONE;
- 
--		dp = dsa_slave_to_port(dev);
-+			dp = p->dp->cpu_dp;
-+
-+			if (!dp->ds->assisted_learning_on_cpu_port)
-+				return NOTIFY_DONE;
-+		}
- 
- 		if (!dp->ds->ops->port_fdb_add || !dp->ds->ops->port_fdb_del)
- 			return NOTIFY_DONE;
-@@ -1666,18 +1712,13 @@ static int dsa_slave_switchdev_event(str
- 		switchdev_work->port = dp->index;
- 		switchdev_work->event = event;
- 
--		fdb_info = ptr;
--
--		if (!fdb_info->added_by_user) {
--			kfree(switchdev_work);
--			return NOTIFY_OK;
--		}
--
- 		ether_addr_copy(switchdev_work->addr,
- 				fdb_info->addr);
- 		switchdev_work->vid = fdb_info->vid;
- 
--		dev_hold(dev);
-+		/* Hold a reference on the slave for dsa_fdb_offload_notify */
-+		if (dsa_is_user_port(dp->ds, dp->index))
-+			dev_hold(dev);
- 		dsa_schedule_work(&switchdev_work->work);
- 		break;
- 	default:
diff --git a/target/linux/generic/backport-5.4/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch b/target/linux/generic/backport-5.4/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch
deleted file mode 100644
index 7ad7cd3a01..0000000000
--- a/target/linux/generic/backport-5.4/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From c3b8e07909dbe67b0d580416c1a5257643a73be7 Mon Sep 17 00:00:00 2001
-From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Date: Fri, 12 Mar 2021 00:07:03 -0800
-Subject: [PATCH] net: dsa: mt7530: setup core clock even in TRGMII mode
-
-A recent change to MIPS ralink reset logic made it so mt7530 actually
-resets the switch on platforms such as mt7621 (where bit 2 is the reset
-line for the switch). That exposed an issue where the switch would not
-function properly in TRGMII mode after a reset.
-
-Reconfigure core clock in TRGMII mode to fix the issue.
-
-Tested on Ubiquiti ER-X (MT7621) with TRGMII mode enabled.
-
-Fixes: 3f9ef7785a9c ("MIPS: ralink: manage low reset lines")
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 52 +++++++++++++++++++---------------------
- 1 file changed, 25 insertions(+), 27 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -428,34 +428,32 @@ mt7530_pad_clk_setup(struct dsa_switch *
- 			     TD_DM_DRVP(8) | TD_DM_DRVN(8));
- 
- 	/* Setup core clock for MT7530 */
--	if (!trgint) {
--		/* Disable MT7530 core clock */
--		core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
--
--		/* Disable PLL, since phy_device has not yet been created
--		 * provided for phy_[read,write]_mmd_indirect is called, we
--		 * provide our own core_write_mmd_indirect to complete this
--		 * function.
--		 */
--		core_write_mmd_indirect(priv,
--					CORE_GSWPLL_GRP1,
--					MDIO_MMD_VEND2,
--					0);
--
--		/* Set core clock into 500Mhz */
--		core_write(priv, CORE_GSWPLL_GRP2,
--			   RG_GSWPLL_POSDIV_500M(1) |
--			   RG_GSWPLL_FBKDIV_500M(25));
--
--		/* Enable PLL */
--		core_write(priv, CORE_GSWPLL_GRP1,
--			   RG_GSWPLL_EN_PRE |
--			   RG_GSWPLL_POSDIV_200M(2) |
--			   RG_GSWPLL_FBKDIV_200M(32));
--
--		/* Enable MT7530 core clock */
--		core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
--	}
-+	/* Disable MT7530 core clock */
-+	core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
-+
-+	/* Disable PLL, since phy_device has not yet been created
-+	 * provided for phy_[read,write]_mmd_indirect is called, we
-+	 * provide our own core_write_mmd_indirect to complete this
-+	 * function.
-+	 */
-+	core_write_mmd_indirect(priv,
-+				CORE_GSWPLL_GRP1,
-+				MDIO_MMD_VEND2,
-+				0);
-+
-+	/* Set core clock into 500Mhz */
-+	core_write(priv, CORE_GSWPLL_GRP2,
-+		   RG_GSWPLL_POSDIV_500M(1) |
-+		   RG_GSWPLL_FBKDIV_500M(25));
-+
-+	/* Enable PLL */
-+	core_write(priv, CORE_GSWPLL_GRP1,
-+		   RG_GSWPLL_EN_PRE |
-+		   RG_GSWPLL_POSDIV_200M(2) |
-+		   RG_GSWPLL_FBKDIV_200M(32));
-+
-+	/* Enable MT7530 core clock */
-+	core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
- 
- 	/* Setup the MT7530 TRGMII Tx Clock */
- 	core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
diff --git a/target/linux/generic/backport-5.4/782-net-next-1-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch b/target/linux/generic/backport-5.4/782-net-next-1-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch
deleted file mode 100644
index 66d379b859..0000000000
--- a/target/linux/generic/backport-5.4/782-net-next-1-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch
+++ /dev/null
@@ -1,1875 +0,0 @@
-From 83216e3988cd196183542937c9bd58b279f946af Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 12 Apr 2021 19:47:17 +0200
-Subject: of: net: pass the dst buffer to of_get_mac_address()
-
-of_get_mac_address() returns a "const void*" pointer to a MAC address.
-Lately, support to fetch the MAC address by an NVMEM provider was added.
-But this will only work with platform devices. It will not work with
-PCI devices (e.g. of an integrated root complex) and esp. not with DSA
-ports.
-
-There is an of_* variant of the nvmem binding which works without
-devices. The returned data of a nvmem_cell_read() has to be freed after
-use. On the other hand the return of_get_mac_address() points to some
-static data without a lifetime. The trick for now, was to allocate a
-device resource managed buffer which is then returned. This will only
-work if we have an actual device.
-
-Change it, so that the caller of of_get_mac_address() has to supply a
-buffer where the MAC address is written to. Unfortunately, this will
-touch all drivers which use the of_get_mac_address().
-
-Usually the code looks like:
-
-  const char *addr;
-  addr = of_get_mac_address(np);
-  if (!IS_ERR(addr))
-    ether_addr_copy(ndev->dev_addr, addr);
-
-This can then be simply rewritten as:
-
-  of_get_mac_address(np, ndev->dev_addr);
-
-Sometimes is_valid_ether_addr() is used to test the MAC address.
-of_get_mac_address() already makes sure, it just returns a valid MAC
-address. Thus we can just test its return code. But we have to be
-careful if there are still other sources for the MAC address before the
-of_get_mac_address(). In this case we have to keep the
-is_valid_ether_addr() call.
-
-The following coccinelle patch was used to convert common cases to the
-new style. Afterwards, I've manually gone over the drivers and fixed the
-return code variable: either used a new one or if one was already
-available use that. Mansour Moufid, thanks for that coccinelle patch!
-
-<spml>
-@a@
-identifier x;
-expression y, z;
-@@
-- x = of_get_mac_address(y);
-+ x = of_get_mac_address(y, z);
-  <...
-- ether_addr_copy(z, x);
-  ...>
-
-@@
-identifier a.x;
-@@
-- if (<+... x ...+>) {}
-
-@@
-identifier a.x;
-@@
-  if (<+... x ...+>) {
-      ...
-  }
-- else {}
-
-@@
-identifier a.x;
-expression e;
-@@
-- if (<+... x ...+>@e)
--     {}
-- else
-+ if (!(e))
-      {...}
-
-@@
-expression x, y, z;
-@@
-- x = of_get_mac_address(y, z);
-+ of_get_mac_address(y, z);
-  ... when != x
-</spml>
-
-All drivers, except drivers/net/ethernet/aeroflex/greth.c, were
-compile-time tested.
-
-Suggested-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Michael Walle <michael@walle.cc>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- arch/arm/mach-mvebu/kirkwood.c                     |  3 +-
- arch/powerpc/sysdev/tsi108_dev.c                   |  5 +-
- drivers/net/ethernet/aeroflex/greth.c              |  6 +--
- drivers/net/ethernet/allwinner/sun4i-emac.c        | 10 ++--
- drivers/net/ethernet/altera/altera_tse_main.c      |  7 +--
- drivers/net/ethernet/arc/emac_main.c               |  8 +--
- drivers/net/ethernet/atheros/ag71xx.c              |  7 +--
- drivers/net/ethernet/broadcom/bcm4908_enet.c       |  7 +--
- drivers/net/ethernet/broadcom/bcmsysport.c         |  7 +--
- drivers/net/ethernet/broadcom/bgmac-bcma.c         | 10 ++--
- drivers/net/ethernet/broadcom/bgmac-platform.c     | 11 ++--
- drivers/net/ethernet/cadence/macb_main.c           | 11 ++--
- drivers/net/ethernet/cavium/octeon/octeon_mgmt.c   |  8 +--
- drivers/net/ethernet/cavium/thunder/thunder_bgx.c  |  5 +-
- drivers/net/ethernet/davicom/dm9000.c              | 10 ++--
- drivers/net/ethernet/ethoc.c                       |  6 +--
- drivers/net/ethernet/ezchip/nps_enet.c             |  7 +--
- drivers/net/ethernet/freescale/fec_main.c          |  7 +--
- drivers/net/ethernet/freescale/fec_mpc52xx.c       |  7 +--
- drivers/net/ethernet/freescale/fman/mac.c          |  9 ++--
- .../net/ethernet/freescale/fs_enet/fs_enet-main.c  |  5 +-
- drivers/net/ethernet/freescale/gianfar.c           |  8 +--
- drivers/net/ethernet/freescale/ucc_geth.c          |  5 +-
- drivers/net/ethernet/hisilicon/hisi_femac.c        |  7 +--
- drivers/net/ethernet/hisilicon/hix5hd2_gmac.c      |  7 +--
- drivers/net/ethernet/lantiq_xrx200.c               |  7 +--
- drivers/net/ethernet/marvell/mv643xx_eth.c         |  5 +-
- drivers/net/ethernet/marvell/mvneta.c              |  6 +--
- .../net/ethernet/marvell/prestera/prestera_main.c  | 11 ++--
- drivers/net/ethernet/marvell/pxa168_eth.c          |  9 +---
- drivers/net/ethernet/marvell/sky2.c                |  8 ++-
- drivers/net/ethernet/mediatek/mtk_eth_soc.c        | 11 ++--
- drivers/net/ethernet/micrel/ks8851_common.c        |  7 ++-
- drivers/net/ethernet/microchip/lan743x_main.c      |  5 +-
- drivers/net/ethernet/nxp/lpc_eth.c                 |  4 +-
- drivers/net/ethernet/qualcomm/qca_spi.c            | 10 ++--
- drivers/net/ethernet/qualcomm/qca_uart.c           |  9 +---
- drivers/net/ethernet/renesas/ravb_main.c           | 12 +++--
- drivers/net/ethernet/renesas/sh_eth.c              |  5 +-
- .../net/ethernet/samsung/sxgbe/sxgbe_platform.c    | 13 ++---
- drivers/net/ethernet/socionext/sni_ave.c           | 10 ++--
- .../net/ethernet/stmicro/stmmac/dwmac-anarion.c    |  2 +-
- .../ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c    |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-generic.c    |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c    |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-intel-plat.c |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-ipq806x.c    |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c    |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-mediatek.c   |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c  |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-meson8b.c    |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c  |  2 +-
- .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c     |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c    |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c    |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c  |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c  |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c  |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-visconti.c   |  2 +-
- drivers/net/ethernet/stmicro/stmmac/stmmac.h       |  2 +-
- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  2 +-
- .../net/ethernet/stmicro/stmmac/stmmac_platform.c  | 14 ++---
- .../net/ethernet/stmicro/stmmac/stmmac_platform.h  |  2 +-
- drivers/net/ethernet/ti/am65-cpsw-nuss.c           | 19 ++++---
- drivers/net/ethernet/ti/cpsw.c                     |  7 +--
- drivers/net/ethernet/ti/cpsw_new.c                 |  7 +--
- drivers/net/ethernet/ti/davinci_emac.c             |  8 +--
- drivers/net/ethernet/ti/netcp_core.c               |  7 +--
- drivers/net/ethernet/wiznet/w5100-spi.c            |  8 ++-
- drivers/net/ethernet/wiznet/w5100.c                |  2 +-
- drivers/net/ethernet/xilinx/ll_temac_main.c        |  8 +--
- drivers/net/ethernet/xilinx/xilinx_axienet_main.c  | 15 +++---
- drivers/net/ethernet/xilinx/xilinx_emaclite.c      |  8 +--
- drivers/net/wireless/ath/ath9k/init.c              |  5 +-
- drivers/net/wireless/mediatek/mt76/eeprom.c        |  9 +---
- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c     |  6 +--
- drivers/of/of_net.c                                | 60 ++++++++++------------
- drivers/staging/octeon/ethernet.c                  | 10 ++--
- drivers/staging/wfx/main.c                         |  7 ++-
- include/linux/of_net.h                             |  6 +--
- include/net/dsa.h                                  |  2 +-
- net/dsa/dsa2.c                                     |  2 +-
- net/dsa/slave.c                                    |  2 +-
- net/ethernet/eth.c                                 | 11 ++--
- 85 files changed, 218 insertions(+), 364 deletions(-)
-
---- a/arch/arm/mach-mvebu/kirkwood.c
-+++ b/arch/arm/mach-mvebu/kirkwood.c
-@@ -84,6 +84,7 @@ static void __init kirkwood_dt_eth_fixup
- 		struct device_node *pnp = of_get_parent(np);
- 		struct clk *clk;
- 		struct property *pmac;
-+		u8 tmpmac[ETH_ALEN];
- 		void __iomem *io;
- 		u8 *macaddr;
- 		u32 reg;
-@@ -93,7 +94,7 @@ static void __init kirkwood_dt_eth_fixup
- 
- 		/* skip disabled nodes or nodes with valid MAC address*/
- 		if (!of_device_is_available(pnp) ||
--		    !IS_ERR(of_get_mac_address(np)))
-+		    !of_get_mac_address(np, tmpmac))
- 			goto eth_fixup_skip;
- 
- 		clk = of_clk_get(pnp, 0);
---- a/arch/powerpc/sysdev/tsi108_dev.c
-+++ b/arch/powerpc/sysdev/tsi108_dev.c
-@@ -73,7 +73,6 @@ static int __init tsi108_eth_of_init(voi
- 		struct device_node *phy, *mdio;
- 		hw_info tsi_eth_data;
- 		const unsigned int *phy_id;
--		const void *mac_addr;
- 		const phandle *ph;
- 
- 		memset(r, 0, sizeof(r));
-@@ -101,9 +100,7 @@ static int __init tsi108_eth_of_init(voi
- 			goto err;
- 		}
- 
--		mac_addr = of_get_mac_address(np);
--		if (!IS_ERR(mac_addr))
--			ether_addr_copy(tsi_eth_data.mac_addr, mac_addr);
-+		of_get_mac_address(np, tsi_eth_data.mac_addr);
- 
- 		ph = of_get_property(np, "mdio-handle", NULL);
- 		mdio = of_find_node_by_phandle(*ph);
---- a/drivers/net/ethernet/aeroflex/greth.c
-+++ b/drivers/net/ethernet/aeroflex/greth.c
-@@ -1451,10 +1451,10 @@ static int greth_of_probe(struct platfor
- 			break;
- 	}
- 	if (i == 6) {
--		const u8 *addr;
-+		u8 addr[ETH_ALEN];
- 
--		addr = of_get_mac_address(ofdev->dev.of_node);
--		if (!IS_ERR(addr)) {
-+		err = of_get_mac_address(ofdev->dev.of_node, addr);
-+		if (!err) {
- 			for (i = 0; i < 6; i++)
- 				macaddr[i] = (unsigned int) addr[i];
- 		} else {
---- a/drivers/net/ethernet/allwinner/sun4i-emac.c
-+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
-@@ -807,7 +807,6 @@ static int emac_probe(struct platform_de
- 	struct emac_board_info *db;
- 	struct net_device *ndev;
- 	int ret = 0;
--	const char *mac_addr;
- 
- 	ndev = alloc_etherdev(sizeof(struct emac_board_info));
- 	if (!ndev) {
-@@ -870,12 +869,9 @@ static int emac_probe(struct platform_de
- 	}
- 
- 	/* Read MAC-address from DT */
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ndev->dev_addr, mac_addr);
--
--	/* Check if the MAC address is valid, if not get a random one */
--	if (!is_valid_ether_addr(ndev->dev_addr)) {
-+	ret = of_get_mac_address(np, ndev->dev_addr);
-+	if (ret) {
-+		/* if the MAC address is invalid get a random one */
- 		eth_hw_addr_random(ndev);
- 		dev_warn(&pdev->dev, "using random MAC address %pM\n",
- 			 ndev->dev_addr);
---- a/drivers/net/ethernet/altera/altera_tse_main.c
-+++ b/drivers/net/ethernet/altera/altera_tse_main.c
-@@ -1351,7 +1351,6 @@ static int altera_tse_probe(struct platf
- 	struct resource *control_port;
- 	struct resource *dma_res;
- 	struct altera_tse_private *priv;
--	const unsigned char *macaddr;
- 	void __iomem *descmap;
- 	const struct of_device_id *of_id = NULL;
- 
-@@ -1528,10 +1527,8 @@ static int altera_tse_probe(struct platf
- 	priv->rx_dma_buf_sz = ALTERA_RXDMABUFFER_SIZE;
- 
- 	/* get default MAC address from device tree */
--	macaddr = of_get_mac_address(pdev->dev.of_node);
--	if (!IS_ERR(macaddr))
--		ether_addr_copy(ndev->dev_addr, macaddr);
--	else
-+	ret = of_get_mac_address(pdev->dev.of_node, ndev->dev_addr);
-+	if (ret)
- 		eth_hw_addr_random(ndev);
- 
- 	/* get phy addr and create mdio */
---- a/drivers/net/ethernet/arc/emac_main.c
-+++ b/drivers/net/ethernet/arc/emac_main.c
-@@ -870,7 +870,6 @@ int arc_emac_probe(struct net_device *nd
- 	struct device_node *phy_node;
- 	struct phy_device *phydev = NULL;
- 	struct arc_emac_priv *priv;
--	const char *mac_addr;
- 	unsigned int id, clock_frequency, irq;
- 	int err;
- 
-@@ -955,11 +954,8 @@ int arc_emac_probe(struct net_device *nd
- 	}
- 
- 	/* Get MAC address from device tree */
--	mac_addr = of_get_mac_address(dev->of_node);
--
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ndev->dev_addr, mac_addr);
--	else
-+	err = of_get_mac_address(dev->of_node, ndev->dev_addr);
-+	if (err)
- 		eth_hw_addr_random(ndev);
- 
- 	arc_emac_set_address_internal(ndev);
---- a/drivers/net/ethernet/atheros/ag71xx.c
-+++ b/drivers/net/ethernet/atheros/ag71xx.c
-@@ -1634,7 +1634,6 @@ static int ag71xx_probe(struct platform_
- 	const struct ag71xx_dcfg *dcfg;
- 	struct net_device *ndev;
- 	struct resource *res;
--	const void *mac_addr;
- 	int tx_size, err, i;
- 	struct ag71xx *ag;
- 
-@@ -1735,10 +1734,8 @@ static int ag71xx_probe(struct platform_
- 	ag->stop_desc->ctrl = 0;
- 	ag->stop_desc->next = (u32)ag->stop_desc_dma;
- 
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr))
--		memcpy(ndev->dev_addr, mac_addr, ETH_ALEN);
--	if (IS_ERR(mac_addr) || !is_valid_ether_addr(ndev->dev_addr)) {
-+	err = of_get_mac_address(np, ndev->dev_addr);
-+	if (err) {
- 		netif_err(ag, probe, ndev, "invalid MAC address, using random address\n");
- 		eth_random_addr(ndev->dev_addr);
- 	}
---- a/drivers/net/ethernet/broadcom/bcmsysport.c
-+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
-@@ -2423,7 +2423,6 @@ static int bcm_sysport_probe(struct plat
- 	struct bcm_sysport_priv *priv;
- 	struct device_node *dn;
- 	struct net_device *dev;
--	const void *macaddr;
- 	u32 txq, rxq;
- 	int ret;
- 
-@@ -2505,12 +2504,10 @@ static int bcm_sysport_probe(struct plat
- 	}
- 
- 	/* Initialize netdevice members */
--	macaddr = of_get_mac_address(dn);
--	if (IS_ERR(macaddr)) {
-+	ret = of_get_mac_address(dn, dev->dev_addr);
-+	if (ret) {
- 		dev_warn(&pdev->dev, "using random Ethernet MAC\n");
- 		eth_hw_addr_random(dev);
--	} else {
--		ether_addr_copy(dev->dev_addr, macaddr);
- 	}
- 
- 	SET_NETDEV_DEV(dev, &pdev->dev);
---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
-@@ -115,7 +115,7 @@ static int bgmac_probe(struct bcma_devic
- 	struct ssb_sprom *sprom = &core->bus->sprom;
- 	struct mii_bus *mii_bus;
- 	struct bgmac *bgmac;
--	const u8 *mac = NULL;
-+	const u8 *mac;
- 	int err;
- 
- 	bgmac = bgmac_alloc(&core->dev);
-@@ -128,11 +128,10 @@ static int bgmac_probe(struct bcma_devic
- 
- 	bcma_set_drvdata(core, bgmac);
- 
--	if (bgmac->dev->of_node)
--		mac = of_get_mac_address(bgmac->dev->of_node);
-+	err = of_get_mac_address(bgmac->dev->of_node, bgmac->net_dev->dev_addr);
- 
- 	/* If no MAC address assigned via device tree, check SPROM */
--	if (IS_ERR_OR_NULL(mac)) {
-+	if (err) {
- 		switch (core->core_unit) {
- 		case 0:
- 			mac = sprom->et0mac;
-@@ -149,10 +148,9 @@ static int bgmac_probe(struct bcma_devic
- 			err = -ENOTSUPP;
- 			goto err;
- 		}
-+		ether_addr_copy(bgmac->net_dev->dev_addr, mac);
- 	}
- 
--	ether_addr_copy(bgmac->net_dev->dev_addr, mac);
--
- 	/* On BCM4706 we need common core to access PHY */
- 	if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
- 	    !core->bus->drv_gmac_cmn.core) {
---- a/drivers/net/ethernet/broadcom/bgmac-platform.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-platform.c
-@@ -173,7 +173,7 @@ static int bgmac_probe(struct platform_d
- 	struct device_node *np = pdev->dev.of_node;
- 	struct bgmac *bgmac;
- 	struct resource *regs;
--	const u8 *mac_addr;
-+	int ret;
- 
- 	bgmac = bgmac_alloc(&pdev->dev);
- 	if (!bgmac)
-@@ -192,11 +192,10 @@ static int bgmac_probe(struct platform_d
- 	bgmac->dev = &pdev->dev;
- 	bgmac->dma_dev = &pdev->dev;
- 
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(bgmac->net_dev->dev_addr, mac_addr);
--	else
--		dev_warn(&pdev->dev, "MAC address not present in device tree\n");
-+	ret = of_get_mac_address(np, bgmac->net_dev->dev_addr);
-+	if (ret)
-+		dev_warn(&pdev->dev,
-+			 "MAC address not present in device tree\n");
- 
- 	bgmac->irq = platform_get_irq(pdev, 0);
- 	if (bgmac->irq < 0)
---- a/drivers/net/ethernet/cadence/macb_main.c
-+++ b/drivers/net/ethernet/cadence/macb_main.c
-@@ -4206,7 +4206,6 @@ static int macb_probe(struct platform_de
- 	struct net_device *dev;
- 	struct resource *regs;
- 	void __iomem *mem;
--	const char *mac;
- 	struct macb *bp;
- 	int err, val;
- 
-@@ -4319,15 +4318,11 @@ static int macb_probe(struct platform_de
- 	if (bp->caps & MACB_CAPS_NEEDS_RSTONUBR)
- 		bp->rx_intr_mask |= MACB_BIT(RXUBR);
- 
--	mac = of_get_mac_address(np);
--	if (PTR_ERR(mac) == -EPROBE_DEFER) {
--		err = -EPROBE_DEFER;
-+	err = of_get_mac_address(np, bp->dev->dev_addr);
-+	if (err == -EPROBE_DEFER)
- 		goto err_out_free_netdev;
--	} else if (!IS_ERR_OR_NULL(mac)) {
--		ether_addr_copy(bp->dev->dev_addr, mac);
--	} else {
-+	else if (err)
- 		macb_get_hwaddr(bp);
--	}
- 
- 	err = of_get_phy_mode(np);
- 	if (err < 0)
---- a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c
-+++ b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c
-@@ -1391,7 +1391,6 @@ static int octeon_mgmt_probe(struct plat
- 	struct net_device *netdev;
- 	struct octeon_mgmt *p;
- 	const __be32 *data;
--	const u8 *mac;
- 	struct resource *res_mix;
- 	struct resource *res_agl;
- 	struct resource *res_agl_prt_ctl;
-@@ -1508,11 +1507,8 @@ static int octeon_mgmt_probe(struct plat
- 	netdev->min_mtu = 64 - OCTEON_MGMT_RX_HEADROOM;
- 	netdev->max_mtu = 16383 - OCTEON_MGMT_RX_HEADROOM - VLAN_HLEN;
- 
--	mac = of_get_mac_address(pdev->dev.of_node);
--
--	if (!IS_ERR(mac))
--		ether_addr_copy(netdev->dev_addr, mac);
--	else
-+	result = of_get_mac_address(pdev->dev.of_node, netdev->dev_addr);
-+	if (result)
- 		eth_hw_addr_random(netdev);
- 
- 	p->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
---- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
-+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
-@@ -1474,7 +1474,6 @@ static int bgx_init_of_phy(struct bgx *b
- 	device_for_each_child_node(&bgx->pdev->dev, fwn) {
- 		struct phy_device *pd;
- 		struct device_node *phy_np;
--		const char *mac;
- 
- 		/* Should always be an OF node.  But if it is not, we
- 		 * cannot handle it, so exit the loop.
-@@ -1483,9 +1482,7 @@ static int bgx_init_of_phy(struct bgx *b
- 		if (!node)
- 			break;
- 
--		mac = of_get_mac_address(node);
--		if (!IS_ERR(mac))
--			ether_addr_copy(bgx->lmac[lmac].mac, mac);
-+		of_get_mac_address(node, bgx->lmac[lmac].mac);
- 
- 		SET_NETDEV_DEV(&bgx->lmac[lmac].netdev, &bgx->pdev->dev);
- 		bgx->lmac[lmac].lmacid = lmac;
---- a/drivers/net/ethernet/davicom/dm9000.c
-+++ b/drivers/net/ethernet/davicom/dm9000.c
-@@ -1390,7 +1390,7 @@ static struct dm9000_plat_data *dm9000_p
- {
- 	struct dm9000_plat_data *pdata;
- 	struct device_node *np = dev->of_node;
--	const void *mac_addr;
-+	int ret;
- 
- 	if (!IS_ENABLED(CONFIG_OF) || !np)
- 		return ERR_PTR(-ENXIO);
-@@ -1404,11 +1404,9 @@ static struct dm9000_plat_data *dm9000_p
- 	if (of_find_property(np, "davicom,no-eeprom", NULL))
- 		pdata->flags |= DM9000_PLATF_NO_EEPROM;
- 
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(pdata->dev_addr, mac_addr);
--	else if (PTR_ERR(mac_addr) == -EPROBE_DEFER)
--		return ERR_CAST(mac_addr);
-+	ret = of_get_mac_address(np, pdata->dev_addr);
-+	if (ret == -EPROBE_DEFER)
-+		return ERR_PTR(ret);
- 
- 	return pdata;
- }
---- a/drivers/net/ethernet/ethoc.c
-+++ b/drivers/net/ethernet/ethoc.c
-@@ -1147,11 +1147,7 @@ static int ethoc_probe(struct platform_d
- 		ether_addr_copy(netdev->dev_addr, pdata->hwaddr);
- 		priv->phy_id = pdata->phy_id;
- 	} else {
--		const void *mac;
--
--		mac = of_get_mac_address(pdev->dev.of_node);
--		if (!IS_ERR(mac))
--			ether_addr_copy(netdev->dev_addr, mac);
-+		of_get_mac_address(pdev->dev.of_node, netdev->dev_addr);
- 		priv->phy_id = -1;
- 	}
- 
---- a/drivers/net/ethernet/ezchip/nps_enet.c
-+++ b/drivers/net/ethernet/ezchip/nps_enet.c
-@@ -575,7 +575,6 @@ static s32 nps_enet_probe(struct platfor
- 	struct net_device *ndev;
- 	struct nps_enet_priv *priv;
- 	s32 err = 0;
--	const char *mac_addr;
- 
- 	if (!dev->of_node)
- 		return -ENODEV;
-@@ -602,10 +601,8 @@ static s32 nps_enet_probe(struct platfor
- 	dev_dbg(dev, "Registers base address is 0x%p\n", priv->regs_base);
- 
- 	/* set kernel MAC address to dev */
--	mac_addr = of_get_mac_address(dev->of_node);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ndev->dev_addr, mac_addr);
--	else
-+	err = of_get_mac_address(dev->of_node, ndev->dev_addr);
-+	if (err)
- 		eth_hw_addr_random(ndev);
- 
- 	/* Get IRQ number */
---- a/drivers/net/ethernet/freescale/fec_main.c
-+++ b/drivers/net/ethernet/freescale/fec_main.c
-@@ -1695,6 +1695,7 @@ static void fec_get_mac(struct net_devic
- 	struct fec_enet_private *fep = netdev_priv(ndev);
- 	struct fec_platform_data *pdata = dev_get_platdata(&fep->pdev->dev);
- 	unsigned char *iap, tmpaddr[ETH_ALEN];
-+	int ret;
- 
- 	/*
- 	 * try to get mac address in following order:
-@@ -1710,9 +1711,9 @@ static void fec_get_mac(struct net_devic
- 	if (!is_valid_ether_addr(iap)) {
- 		struct device_node *np = fep->pdev->dev.of_node;
- 		if (np) {
--			const char *mac = of_get_mac_address(np);
--			if (!IS_ERR(mac))
--				iap = (unsigned char *) mac;
-+			ret = of_get_mac_address(np, tmpaddr);
-+			if (!ret)
-+				iap = tmpaddr;
- 		}
- 	}
- 
---- a/drivers/net/ethernet/freescale/fec_mpc52xx.c
-+++ b/drivers/net/ethernet/freescale/fec_mpc52xx.c
-@@ -823,7 +823,6 @@ static int mpc52xx_fec_probe(struct plat
- 	const u32 *prop;
- 	int prop_size;
- 	struct device_node *np = op->dev.of_node;
--	const char *mac_addr;
- 
- 	phys_addr_t rx_fifo;
- 	phys_addr_t tx_fifo;
-@@ -901,10 +900,8 @@ static int mpc52xx_fec_probe(struct plat
- 	 *
- 	 * First try to read MAC address from DT
- 	 */
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr)) {
--		ether_addr_copy(ndev->dev_addr, mac_addr);
--	} else {
-+	rv = of_get_mac_address(np, ndev->dev_addr);
-+	if (rv) {
- 		struct mpc52xx_fec __iomem *fec = priv->fec;
- 
- 		/*
---- a/drivers/net/ethernet/freescale/fman/mac.c
-+++ b/drivers/net/ethernet/freescale/fman/mac.c
-@@ -616,7 +616,6 @@ static int mac_probe(struct platform_dev
- 	struct platform_device	*of_dev;
- 	struct resource		 res;
- 	struct mac_priv_s	*priv;
--	const u8		*mac_addr;
- 	u32			 val;
- 	u8			fman_id;
- 	int			phy_if;
-@@ -734,13 +733,12 @@ static int mac_probe(struct platform_dev
- 	priv->cell_index = (u8)val;
- 
- 	/* Get the MAC address */
--	mac_addr = of_get_mac_address(mac_node);
--	if (IS_ERR(mac_addr)) {
-+	err = of_get_mac_address(mac_node, mac_dev->addr);
-+	if (err) {
- 		dev_err(dev, "of_get_mac_address(%pOF) failed\n", mac_node);
- 		err = -EINVAL;
- 		goto _return_of_get_parent;
- 	}
--	ether_addr_copy(mac_dev->addr, mac_addr);
- 
- 	/* Get the port handles */
- 	nph = of_count_phandle_with_args(mac_node, "fsl,fman-ports", NULL);
---- a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
-+++ b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
-@@ -925,7 +925,6 @@ static int fs_enet_probe(struct platform
- 	const u32 *data;
- 	struct clk *clk;
- 	int err;
--	const u8 *mac_addr;
- 	const char *phy_connection_type;
- 	int privsize, len, ret = -ENODEV;
- 
-@@ -1013,9 +1012,7 @@ static int fs_enet_probe(struct platform
- 	spin_lock_init(&fep->lock);
- 	spin_lock_init(&fep->tx_lock);
- 
--	mac_addr = of_get_mac_address(ofdev->dev.of_node);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ndev->dev_addr, mac_addr);
-+	of_get_mac_address(ofdev->dev.of_node, ndev->dev_addr);
- 
- 	ret = fep->ops->allocate_bd(ndev);
- 	if (ret)
---- a/drivers/net/ethernet/freescale/gianfar.c
-+++ b/drivers/net/ethernet/freescale/gianfar.c
-@@ -643,7 +643,6 @@ static phy_interface_t gfar_get_interfac
- static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
- {
- 	const char *model;
--	const void *mac_addr;
- 	int err = 0, i;
- 	struct net_device *dev = NULL;
- 	struct gfar_private *priv = NULL;
-@@ -784,10 +783,7 @@ static int gfar_of_init(struct platform_
- 	if (stash_len || stash_idx)
- 		priv->device_flags |= FSL_GIANFAR_DEV_HAS_BUF_STASHING;
- 
--	mac_addr = of_get_mac_address(np);
--
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(dev->dev_addr, mac_addr);
-+	err = of_get_mac_address(np, dev->dev_addr);
- 
- 	if (model && !strcasecmp(model, "TSEC"))
- 		priv->device_flags |= FSL_GIANFAR_DEV_HAS_GIGABIT |
---- a/drivers/net/ethernet/freescale/ucc_geth.c
-+++ b/drivers/net/ethernet/freescale/ucc_geth.c
-@@ -3697,7 +3697,6 @@ static int ucc_geth_probe(struct platfor
- 	int err, ucc_num, max_speed = 0;
- 	const unsigned int *prop;
- 	const char *sprop;
--	const void *mac_addr;
- 	phy_interface_t phy_interface;
- 	static const int enet_to_speed[] = {
- 		SPEED_10, SPEED_10, SPEED_10,
-@@ -3907,9 +3906,7 @@ static int ucc_geth_probe(struct platfor
- 		goto err_free_netdev;
- 	}
- 
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(dev->dev_addr, mac_addr);
-+	of_get_mac_address(np, dev->dev_addr);
- 
- 	ugeth->ug_info = ug_info;
- 	ugeth->dev = device;
---- a/drivers/net/ethernet/hisilicon/hisi_femac.c
-+++ b/drivers/net/ethernet/hisilicon/hisi_femac.c
-@@ -784,7 +784,6 @@ static int hisi_femac_drv_probe(struct p
- 	struct net_device *ndev;
- 	struct hisi_femac_priv *priv;
- 	struct phy_device *phy;
--	const char *mac_addr;
- 	int ret;
- 
- 	ndev = alloc_etherdev(sizeof(*priv));
-@@ -854,10 +853,8 @@ static int hisi_femac_drv_probe(struct p
- 			   (unsigned long)phy->phy_id,
- 			   phy_modes(phy->interface));
- 
--	mac_addr = of_get_mac_address(node);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ndev->dev_addr, mac_addr);
--	if (!is_valid_ether_addr(ndev->dev_addr)) {
-+	ret = of_get_mac_address(node, ndev->dev_addr);
-+	if (ret) {
- 		eth_hw_addr_random(ndev);
- 		dev_warn(dev, "using random MAC address %pM\n",
- 			 ndev->dev_addr);
---- a/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c
-+++ b/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c
-@@ -1098,7 +1098,6 @@ static int hix5hd2_dev_probe(struct plat
- 	struct net_device *ndev;
- 	struct hix5hd2_priv *priv;
- 	struct mii_bus *bus;
--	const char *mac_addr;
- 	int ret;
- 
- 	ndev = alloc_etherdev(sizeof(struct hix5hd2_priv));
-@@ -1221,10 +1220,8 @@ static int hix5hd2_dev_probe(struct plat
- 		goto out_phy_node;
- 	}
- 
--	mac_addr = of_get_mac_address(node);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ndev->dev_addr, mac_addr);
--	if (!is_valid_ether_addr(ndev->dev_addr)) {
-+	ret = of_get_mac_address(node, ndev->dev_addr);
-+	if (ret) {
- 		eth_hw_addr_random(ndev);
- 		netdev_warn(ndev, "using random MAC address %pM\n",
- 			    ndev->dev_addr);
---- a/drivers/net/ethernet/lantiq_xrx200.c
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -439,7 +439,6 @@ static int xrx200_probe(struct platform_
- 	struct resource *res;
- 	struct xrx200_priv *priv;
- 	struct net_device *net_dev;
--	const u8 *mac;
- 	int err;
- 
- 	/* alloc the network device */
-@@ -483,10 +482,8 @@ static int xrx200_probe(struct platform_
- 		return PTR_ERR(priv->clk);
- 	}
- 
--	mac = of_get_mac_address(np);
--	if (!IS_ERR(mac))
--		ether_addr_copy(net_dev->dev_addr, mac);
--	else
-+	err = of_get_mac_address(np, net_dev->dev_addr);
-+	if (err)
- 		eth_hw_addr_random(net_dev);
- 
- 	/* bring up the dma engine and IP core */
---- a/drivers/net/ethernet/marvell/mv643xx_eth.c
-+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
-@@ -2705,7 +2705,6 @@ static int mv643xx_eth_shared_of_add_por
- 	struct platform_device *ppdev;
- 	struct mv643xx_eth_platform_data ppd;
- 	struct resource res;
--	const char *mac_addr;
- 	int ret;
- 	int dev_num = 0;
- 
-@@ -2736,9 +2735,7 @@ static int mv643xx_eth_shared_of_add_por
- 		return -EINVAL;
- 	}
- 
--	mac_addr = of_get_mac_address(pnp);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ppd.mac_addr, mac_addr);
-+	of_get_mac_address(pnp, ppd.mac_addr);
- 
- 	mv643xx_eth_property(pnp, "tx-queue-size", ppd.tx_queue_size);
- 	mv643xx_eth_property(pnp, "tx-sram-addr", ppd.tx_sram_addr);
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4526,7 +4526,6 @@ static int mvneta_probe(struct platform_
- 	struct net_device *dev;
- 	struct phylink *phylink;
- 	struct phy *comphy;
--	const char *dt_mac_addr;
- 	char hw_mac_addr[ETH_ALEN];
- 	const char *mac_from;
- 	int tx_csum_limit;
-@@ -4623,10 +4622,9 @@ static int mvneta_probe(struct platform_
- 		goto err_free_ports;
- 	}
- 
--	dt_mac_addr = of_get_mac_address(dn);
--	if (!IS_ERR(dt_mac_addr)) {
-+	err = of_get_mac_address(dn, dev->dev_addr);
-+	if (!err) {
- 		mac_from = "device tree";
--		ether_addr_copy(dev->dev_addr, dt_mac_addr);
- 	} else {
- 		mvneta_get_mac_addr(pp, hw_mac_addr);
- 		if (is_valid_ether_addr(hw_mac_addr)) {
---- a/drivers/net/ethernet/marvell/pxa168_eth.c
-+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
-@@ -1402,7 +1402,6 @@ static int pxa168_eth_probe(struct platf
- 	struct resource *res;
- 	struct clk *clk;
- 	struct device_node *np;
--	const unsigned char *mac_addr = NULL;
- 	int err;
- 
- 	printk(KERN_NOTICE "PXA168 10/100 Ethernet Driver\n");
-@@ -1445,12 +1444,8 @@ static int pxa168_eth_probe(struct platf
- 
- 	INIT_WORK(&pep->tx_timeout_task, pxa168_eth_tx_timeout_task);
- 
--	if (pdev->dev.of_node)
--		mac_addr = of_get_mac_address(pdev->dev.of_node);
--
--	if (!IS_ERR_OR_NULL(mac_addr)) {
--		ether_addr_copy(dev->dev_addr, mac_addr);
--	} else {
-+	err = of_get_mac_address(pdev->dev.of_node, dev->dev_addr);
-+	if (err) {
- 		/* try reading the mac address, if set by the bootloader */
- 		pxa168_eth_get_mac_address(dev, dev->dev_addr);
- 		if (!is_valid_ether_addr(dev->dev_addr)) {
---- a/drivers/net/ethernet/marvell/sky2.c
-+++ b/drivers/net/ethernet/marvell/sky2.c
-@@ -4721,7 +4721,7 @@ static struct net_device *sky2_init_netd
- {
- 	struct sky2_port *sky2;
- 	struct net_device *dev = alloc_etherdev(sizeof(*sky2));
--	const void *iap;
-+	int ret;
- 
- 	if (!dev)
- 		return NULL;
-@@ -4791,10 +4791,8 @@ static struct net_device *sky2_init_netd
- 	 * 1) from device tree data
- 	 * 2) from internal registers set by bootloader
- 	 */
--	iap = of_get_mac_address(hw->pdev->dev.of_node);
--	if (!IS_ERR(iap))
--		ether_addr_copy(dev->dev_addr, iap);
--	else
-+	ret = of_get_mac_address(hw->pdev->dev.of_node, dev->dev_addr);
-+	if (ret)
- 		memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8,
- 			      ETH_ALEN);
- 
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2490,14 +2490,11 @@ static int __init mtk_init(struct net_de
- {
- 	struct mtk_mac *mac = netdev_priv(dev);
- 	struct mtk_eth *eth = mac->hw;
--	const char *mac_addr;
-+	int ret;
- 
--	mac_addr = of_get_mac_address(mac->of_node);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(dev->dev_addr, mac_addr);
--
--	/* If the mac address is invalid, use random mac address  */
--	if (!is_valid_ether_addr(dev->dev_addr)) {
-+	ret = of_get_mac_address(mac->of_node, dev->dev_addr);
-+	if (ret) {
-+		/* If the mac address is invalid, use random mac address */
- 		eth_hw_addr_random(dev);
- 		dev_err(eth->dev, "generated random MAC address %pM\n",
- 			dev->dev_addr);
---- a/drivers/net/ethernet/micrel/ks8851.c
-+++ b/drivers/net/ethernet/micrel/ks8851.c
-@@ -419,11 +419,10 @@ static void ks8851_read_mac_addr(struct
- static void ks8851_init_mac(struct ks8851_net *ks)
- {
- 	struct net_device *dev = ks->netdev;
--	const u8 *mac_addr;
-+	int ret;
- 
--	mac_addr = of_get_mac_address(ks->spidev->dev.of_node);
--	if (!IS_ERR(mac_addr)) {
--		ether_addr_copy(dev->dev_addr, mac_addr);
-+	ret = of_get_mac_address(ks->spidev->dev.of_node, dev->dev_addr);
-+	if (!ret) {
- 		ks8851_write_mac_addr(dev);
- 		return;
- 	}
---- a/drivers/net/ethernet/micrel/ks8851_mll.c
-+++ b/drivers/net/ethernet/micrel/ks8851_mll.c
-@@ -1239,7 +1239,6 @@ static int ks8851_probe(struct platform_
- 	struct net_device *netdev;
- 	struct ks_net *ks;
- 	u16 id, data;
--	const char *mac;
- 
- 	netdev = alloc_etherdev(sizeof(struct ks_net));
- 	if (!netdev)
-@@ -1326,9 +1325,7 @@ static int ks8851_probe(struct platform_
- 
- 	/* overwriting the default MAC address */
- 	if (pdev->dev.of_node) {
--		mac = of_get_mac_address(pdev->dev.of_node);
--		if (!IS_ERR(mac))
--			ether_addr_copy(ks->mac_addr, mac);
-+		of_get_mac_address(pdev->dev.of_node, ks->mac_addr);
- 	} else {
- 		struct ks8851_mll_platform_data *pdata;
- 
---- a/drivers/net/ethernet/nxp/lpc_eth.c
-+++ b/drivers/net/ethernet/nxp/lpc_eth.c
-@@ -1349,9 +1349,7 @@ static int lpc_eth_drv_probe(struct plat
- 	__lpc_get_mac(pldat, ndev->dev_addr);
- 
- 	if (!is_valid_ether_addr(ndev->dev_addr)) {
--		const char *macaddr = of_get_mac_address(np);
--		if (!IS_ERR(macaddr))
--			ether_addr_copy(ndev->dev_addr, macaddr);
-+		of_get_mac_address(np, ndev->dev_addr);
- 	}
- 	if (!is_valid_ether_addr(ndev->dev_addr))
- 		eth_hw_addr_random(ndev);
---- a/drivers/net/ethernet/qualcomm/qca_spi.c
-+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
-@@ -885,7 +885,7 @@ qca_spi_probe(struct spi_device *spi)
- 	struct net_device *qcaspi_devs = NULL;
- 	u8 legacy_mode = 0;
- 	u16 signature;
--	const char *mac;
-+	int ret;
- 
- 	if (!spi->dev.of_node) {
- 		dev_err(&spi->dev, "Missing device tree\n");
-@@ -962,12 +962,8 @@ qca_spi_probe(struct spi_device *spi)
- 
- 	spi_set_drvdata(spi, qcaspi_devs);
- 
--	mac = of_get_mac_address(spi->dev.of_node);
--
--	if (!IS_ERR(mac))
--		ether_addr_copy(qca->net_dev->dev_addr, mac);
--
--	if (!is_valid_ether_addr(qca->net_dev->dev_addr)) {
-+	ret = of_get_mac_address(spi->dev.of_node, qca->net_dev->dev_addr);
-+	if (ret) {
- 		eth_hw_addr_random(qca->net_dev);
- 		dev_info(&spi->dev, "Using random MAC address: %pM\n",
- 			 qca->net_dev->dev_addr);
---- a/drivers/net/ethernet/qualcomm/qca_uart.c
-+++ b/drivers/net/ethernet/qualcomm/qca_uart.c
-@@ -323,7 +323,6 @@ static int qca_uart_probe(struct serdev_
- {
- 	struct net_device *qcauart_dev = alloc_etherdev(sizeof(struct qcauart));
- 	struct qcauart *qca;
--	const char *mac;
- 	u32 speed = 115200;
- 	int ret;
- 
-@@ -348,12 +347,8 @@ static int qca_uart_probe(struct serdev_
- 
- 	of_property_read_u32(serdev->dev.of_node, "current-speed", &speed);
- 
--	mac = of_get_mac_address(serdev->dev.of_node);
--
--	if (!IS_ERR(mac))
--		ether_addr_copy(qca->net_dev->dev_addr, mac);
--
--	if (!is_valid_ether_addr(qca->net_dev->dev_addr)) {
-+	ret = of_get_mac_address(serdev->dev.of_node, qca->net_dev->dev_addr);
-+	if (ret) {
- 		eth_hw_addr_random(qca->net_dev);
- 		dev_info(&serdev->dev, "Using random MAC address: %pM\n",
- 			 qca->net_dev->dev_addr);
---- a/drivers/net/ethernet/renesas/ravb_main.c
-+++ b/drivers/net/ethernet/renesas/ravb_main.c
-@@ -109,11 +109,13 @@ static void ravb_set_buffer_align(struct
-  * Ethernet AVB device doesn't have ROM for MAC address.
-  * This function gets the MAC address that was used by a bootloader.
-  */
--static void ravb_read_mac_address(struct net_device *ndev, const u8 *mac)
-+static void ravb_read_mac_address(struct device_node *np,
-+				  struct net_device *ndev)
- {
--	if (!IS_ERR(mac)) {
--		ether_addr_copy(ndev->dev_addr, mac);
--	} else {
-+	int ret;
-+
-+	ret = of_get_mac_address(np, ndev->dev_addr);
-+	if (ret) {
- 		u32 mahr = ravb_read(ndev, MAHR);
- 		u32 malr = ravb_read(ndev, MALR);
- 
-@@ -2152,7 +2154,7 @@ static int ravb_probe(struct platform_de
- 	priv->msg_enable = RAVB_DEF_MSG_ENABLE;
- 
- 	/* Read and set MAC address */
--	ravb_read_mac_address(ndev, of_get_mac_address(np));
-+	ravb_read_mac_address(np, ndev);
- 	if (!is_valid_ether_addr(ndev->dev_addr)) {
- 		dev_warn(&pdev->dev,
- 			 "no valid MAC address supplied, using a random one\n");
---- a/drivers/net/ethernet/renesas/sh_eth.c
-+++ b/drivers/net/ethernet/renesas/sh_eth.c
-@@ -3195,7 +3195,6 @@ static struct sh_eth_plat_data *sh_eth_p
- {
- 	struct device_node *np = dev->of_node;
- 	struct sh_eth_plat_data *pdata;
--	const char *mac_addr;
- 	int ret;
- 
- 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
-@@ -3207,9 +3206,7 @@ static struct sh_eth_plat_data *sh_eth_p
- 		return NULL;
- 	pdata->phy_interface = ret;
- 
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(pdata->mac_addr, mac_addr);
-+	of_get_mac_address(np, pdata->mac_addr);
- 
- 	pdata->no_ether_link =
- 		of_property_read_bool(np, "renesas,no-ether-link");
---- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
-+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
-@@ -25,8 +25,7 @@
- 
- #ifdef CONFIG_OF
- static int sxgbe_probe_config_dt(struct platform_device *pdev,
--				 struct sxgbe_plat_data *plat,
--				 const char **mac)
-+				 struct sxgbe_plat_data *plat)
- {
- 	struct device_node *np = pdev->dev.of_node;
- 	struct sxgbe_dma_cfg *dma_cfg;
-@@ -34,7 +33,6 @@ static int sxgbe_probe_config_dt(struct
- 	if (!np)
- 		return -ENODEV;
- 
--	*mac = of_get_mac_address(np);
- 	plat->interface = of_get_phy_mode(np);
- 
- 	plat->bus_id = of_alias_get_id(np, "ethernet");
-@@ -60,8 +58,7 @@ static int sxgbe_probe_config_dt(struct
- }
- #else
- static int sxgbe_probe_config_dt(struct platform_device *pdev,
--				 struct sxgbe_plat_data *plat,
--				 const char **mac)
-+				 struct sxgbe_plat_data *plat)
- {
- 	return -ENOSYS;
- }
-@@ -82,7 +79,6 @@ static int sxgbe_platform_probe(struct p
- 	void __iomem *addr;
- 	struct sxgbe_priv_data *priv = NULL;
- 	struct sxgbe_plat_data *plat_dat = NULL;
--	const char *mac = NULL;
- 	struct net_device *ndev = platform_get_drvdata(pdev);
- 	struct device_node *node = dev->of_node;
- 
-@@ -98,7 +94,7 @@ static int sxgbe_platform_probe(struct p
- 		if (!plat_dat)
- 			return  -ENOMEM;
- 
--		ret = sxgbe_probe_config_dt(pdev, plat_dat, &mac);
-+		ret = sxgbe_probe_config_dt(pdev, plat_dat);
- 		if (ret) {
- 			pr_err("%s: main dt probe failed\n", __func__);
- 			return ret;
-@@ -119,8 +115,7 @@ static int sxgbe_platform_probe(struct p
- 	}
- 
- 	/* Get MAC address if available (DT) */
--	if (!IS_ERR_OR_NULL(mac))
--		ether_addr_copy(priv->dev->dev_addr, mac);
-+	of_get_mac_address(node, priv->dev->dev_addr);
- 
- 	/* Get the TX/RX IRQ numbers */
- 	for (i = 0, chan = 1; i < SXGBE_TX_QUEUES; i++) {
---- a/drivers/net/ethernet/socionext/sni_ave.c
-+++ b/drivers/net/ethernet/socionext/sni_ave.c
-@@ -1559,7 +1559,6 @@ static int ave_probe(struct platform_dev
- 	struct ave_private *priv;
- 	struct net_device *ndev;
- 	struct device_node *np;
--	const void *mac_addr;
- 	void __iomem *base;
- 	const char *name;
- 	int i, irq, ret;
-@@ -1600,12 +1599,9 @@ static int ave_probe(struct platform_dev
- 
- 	ndev->max_mtu = AVE_MAX_ETHFRAME - (ETH_HLEN + ETH_FCS_LEN);
- 
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ndev->dev_addr, mac_addr);
--
--	/* if the mac address is invalid, use random mac address */
--	if (!is_valid_ether_addr(ndev->dev_addr)) {
-+	ret = of_get_mac_address(np, ndev->dev_addr);
-+	if (ret) {
-+		/* if the mac address is invalid, use random mac address */
- 		eth_hw_addr_random(ndev);
- 		dev_warn(dev, "Using random MAC address: %pM\n",
- 			 ndev->dev_addr);
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
-@@ -110,7 +110,7 @@ static int anarion_dwmac_probe(struct pl
- 	if (IS_ERR(gmac))
- 		return PTR_ERR(gmac);
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
-@@ -438,7 +438,7 @@ static int dwc_eth_dwmac_probe(struct pl
- 	if (IS_ERR(stmmac_res.addr))
- 		return PTR_ERR(stmmac_res.addr);
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
-@@ -27,7 +27,7 @@ static int dwmac_generic_probe(struct pl
- 		return ret;
- 
- 	if (pdev->dev.of_node) {
--		plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+		plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 		if (IS_ERR(plat_dat)) {
- 			dev_err(&pdev->dev, "dt configuration failed\n");
- 			return PTR_ERR(plat_dat);
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
-@@ -254,7 +254,7 @@ static int ipq806x_gmac_probe(struct pla
- 	if (val)
- 		return val;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c
-@@ -37,7 +37,7 @@ static int lpc18xx_dwmac_probe(struct pl
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
-@@ -348,7 +348,7 @@ static int mediatek_dwmac_probe(struct p
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
-@@ -52,7 +52,7 @@ static int meson6_dwmac_probe(struct pla
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
-@@ -324,7 +324,7 @@ static int meson8b_dwmac_probe(struct pl
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c
-@@ -118,7 +118,7 @@ static int oxnas_dwmac_probe(struct plat
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
-@@ -461,7 +461,7 @@ static int qcom_ethqos_probe(struct plat
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat)) {
- 		dev_err(&pdev->dev, "dt configuration failed\n");
- 		return PTR_ERR(plat_dat);
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
-@@ -1396,7 +1396,7 @@ static int rk_gmac_probe(struct platform
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
-@@ -398,7 +398,7 @@ static int socfpga_dwmac_probe(struct pl
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
-@@ -320,7 +320,7 @@ static int sti_dwmac_probe(struct platfo
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
-@@ -364,7 +364,7 @@ static int stm32_dwmac_probe(struct plat
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
-@@ -1127,7 +1127,7 @@ static int sun8i_dwmac_probe(struct plat
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
-@@ -108,7 +108,7 @@ static int sun7i_gmac_probe(struct platf
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
-@@ -25,7 +25,7 @@
- 
- struct stmmac_resources {
- 	void __iomem *addr;
--	const char *mac;
-+	u8 mac[ETH_ALEN];
- 	int wol_irq;
- 	int lpi_irq;
- 	int irq;
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-@@ -4471,7 +4471,7 @@ int stmmac_dvr_probe(struct device *devi
- 	priv->wol_irq = res->wol_irq;
- 	priv->lpi_irq = res->lpi_irq;
- 
--	if (!IS_ERR_OR_NULL(res->mac))
-+	if (!is_zero_ether_addr(res->mac))
- 		memcpy(priv->dev->dev_addr, res->mac, ETH_ALEN);
- 
- 	dev_set_drvdata(device, priv->dev);
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-@@ -393,7 +393,7 @@ static int stmmac_of_get_mac_mode(struct
-  * set some private fields that will be used by the main at runtime.
-  */
- struct plat_stmmacenet_data *
--stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
-+stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
- {
- 	struct device_node *np = pdev->dev.of_node;
- 	struct plat_stmmacenet_data *plat;
-@@ -404,12 +404,12 @@ stmmac_probe_config_dt(struct platform_d
- 	if (!plat)
- 		return ERR_PTR(-ENOMEM);
- 
--	*mac = of_get_mac_address(np);
--	if (IS_ERR(*mac)) {
--		if (PTR_ERR(*mac) == -EPROBE_DEFER)
--			return ERR_CAST(*mac);
-+	rc = of_get_mac_address(np, mac);
-+	if (rc) {
-+		if (rc == -EPROBE_DEFER)
-+			return ERR_PTR(rc);
- 
--		*mac = NULL;
-+		eth_zero_addr(mac);
- 	}
- 
- 	plat->phy_interface = of_get_phy_mode(np);
-@@ -639,7 +639,7 @@ void stmmac_remove_config_dt(struct plat
- }
- #else
- struct plat_stmmacenet_data *
--stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
-+stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
- {
- 	return ERR_PTR(-EINVAL);
- }
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
-@@ -12,7 +12,7 @@
- #include "stmmac.h"
- 
- struct plat_stmmacenet_data *
--stmmac_probe_config_dt(struct platform_device *pdev, const char **mac);
-+stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac);
- void stmmac_remove_config_dt(struct platform_device *pdev,
- 			     struct plat_stmmacenet_data *plat);
- 
---- a/drivers/net/ethernet/ti/cpsw.c
-+++ b/drivers/net/ethernet/ti/cpsw.c
-@@ -2555,7 +2555,6 @@ static int cpsw_probe_dt(struct cpsw_pla
- 
- 	for_each_available_child_of_node(node, slave_node) {
- 		struct cpsw_slave_data *slave_data = data->slave_data + i;
--		const void *mac_addr = NULL;
- 		int lenp;
- 		const __be32 *parp;
- 
-@@ -2628,10 +2627,8 @@ static int cpsw_probe_dt(struct cpsw_pla
- 		}
- 
- no_phy_slave:
--		mac_addr = of_get_mac_address(slave_node);
--		if (!IS_ERR(mac_addr)) {
--			ether_addr_copy(slave_data->mac_addr, mac_addr);
--		} else {
-+		ret = of_get_mac_address(slave_node, slave_data->mac_addr);
-+		if (ret) {
- 			ret = ti_cm_get_macid(&pdev->dev, i,
- 					      slave_data->mac_addr);
- 			if (ret)
---- a/drivers/net/ethernet/ti/davinci_emac.c
-+++ b/drivers/net/ethernet/ti/davinci_emac.c
-@@ -1697,7 +1697,6 @@ davinci_emac_of_get_pdata(struct platfor
- 	const struct of_device_id *match;
- 	const struct emac_platform_data *auxdata;
- 	struct emac_platform_data *pdata = NULL;
--	const u8 *mac_addr;
- 
- 	if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node)
- 		return dev_get_platdata(&pdev->dev);
-@@ -1709,11 +1708,8 @@ davinci_emac_of_get_pdata(struct platfor
- 	np = pdev->dev.of_node;
- 	pdata->version = EMAC_VERSION_2;
- 
--	if (!is_valid_ether_addr(pdata->mac_addr)) {
--		mac_addr = of_get_mac_address(np);
--		if (!IS_ERR(mac_addr))
--			ether_addr_copy(pdata->mac_addr, mac_addr);
--	}
-+	if (!is_valid_ether_addr(pdata->mac_addr))
-+		of_get_mac_address(np, pdata->mac_addr);
- 
- 	of_property_read_u32(np, "ti,davinci-ctrl-reg-offset",
- 			     &pdata->ctrl_reg_offset);
---- a/drivers/net/ethernet/ti/netcp_core.c
-+++ b/drivers/net/ethernet/ti/netcp_core.c
-@@ -1966,7 +1966,6 @@ static int netcp_create_interface(struct
- 	struct resource res;
- 	void __iomem *efuse = NULL;
- 	u32 efuse_mac = 0;
--	const void *mac_addr;
- 	u8 efuse_mac_addr[6];
- 	u32 temp[2];
- 	int ret = 0;
-@@ -2036,10 +2035,8 @@ static int netcp_create_interface(struct
- 		devm_iounmap(dev, efuse);
- 		devm_release_mem_region(dev, res.start, size);
- 	} else {
--		mac_addr = of_get_mac_address(node_interface);
--		if (!IS_ERR(mac_addr))
--			ether_addr_copy(ndev->dev_addr, mac_addr);
--		else
-+		ret = of_get_mac_address(node_interface, ndev->dev_addr);
-+		if (ret)
- 			eth_random_addr(ndev->dev_addr);
- 	}
- 
---- a/drivers/net/ethernet/wiznet/w5100-spi.c
-+++ b/drivers/net/ethernet/wiznet/w5100-spi.c
-@@ -423,8 +423,14 @@ static int w5100_spi_probe(struct spi_de
- 	const struct of_device_id *of_id;
- 	const struct w5100_ops *ops;
- 	kernel_ulong_t driver_data;
-+	const void *mac = NULL;
-+	u8 tmpmac[ETH_ALEN];
- 	int priv_size;
--	const void *mac = of_get_mac_address(spi->dev.of_node);
-+	int ret;
-+
-+	ret = of_get_mac_address(spi->dev.of_node, tmpmac);
-+	if (!ret)
-+		mac = tmpmac;
- 
- 	if (spi->dev.of_node) {
- 		of_id = of_match_device(w5100_of_match, &spi->dev);
---- a/drivers/net/ethernet/wiznet/w5100.c
-+++ b/drivers/net/ethernet/wiznet/w5100.c
-@@ -1159,7 +1159,7 @@ int w5100_probe(struct device *dev, cons
- 	INIT_WORK(&priv->setrx_work, w5100_setrx_work);
- 	INIT_WORK(&priv->restart_work, w5100_restart_work);
- 
--	if (!IS_ERR_OR_NULL(mac_addr))
-+	if (mac_addr)
- 		memcpy(ndev->dev_addr, mac_addr, ETH_ALEN);
- 	else
- 		eth_hw_addr_random(ndev);
---- a/drivers/net/ethernet/xilinx/ll_temac_main.c
-+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
-@@ -434,7 +434,7 @@ static void temac_do_set_mac_address(str
- 
- static int temac_init_mac_address(struct net_device *ndev, const void *address)
- {
--	ether_addr_copy(ndev->dev_addr, address);
-+	memcpy(ndev->dev_addr, address, ETH_ALEN);
- 	if (!is_valid_ether_addr(ndev->dev_addr))
- 		eth_hw_addr_random(ndev);
- 	temac_do_set_mac_address(ndev);
-@@ -1296,7 +1296,7 @@ static int temac_probe(struct platform_d
- 	struct temac_local *lp;
- 	struct net_device *ndev;
- 	struct resource *res;
--	const void *addr;
-+	u8 addr[ETH_ALEN];
- 	__be32 *p;
- 	bool little_endian;
- 	int rc = 0;
-@@ -1492,8 +1492,8 @@ static int temac_probe(struct platform_d
- 
- 	if (temac_np) {
- 		/* Retrieve the MAC address */
--		addr = of_get_mac_address(temac_np);
--		if (IS_ERR(addr)) {
-+		rc = of_get_mac_address(temac_np, addr);
-+		if (rc) {
- 			dev_err(&pdev->dev, "could not find MAC address\n");
- 			return -ENODEV;
- 		}
---- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
-+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
-@@ -1665,7 +1665,7 @@ static int axienet_probe(struct platform
- 	struct device_node *np;
- 	struct axienet_local *lp;
- 	struct net_device *ndev;
--	const void *mac_addr;
-+	u8 mac_addr[ETH_ALEN];
- 	struct resource *ethres;
- 	u32 value;
- 
-@@ -1837,13 +1837,14 @@ static int axienet_probe(struct platform
- 		dev_info(&pdev->dev, "Ethernet core IRQ not defined\n");
- 
- 	/* Retrieve the MAC address */
--	mac_addr = of_get_mac_address(pdev->dev.of_node);
--	if (IS_ERR(mac_addr)) {
--		dev_warn(&pdev->dev, "could not find MAC address property: %ld\n",
--			 PTR_ERR(mac_addr));
--		mac_addr = NULL;
-+	ret = of_get_mac_address(pdev->dev.of_node, mac_addr);
-+	if (!ret) {
-+		axienet_set_mac_address(ndev, mac_addr);
-+	} else {
-+		dev_warn(&pdev->dev, "could not find MAC address property: %d\n",
-+			 ret);
-+		axienet_set_mac_address(ndev, NULL);
- 	}
--	axienet_set_mac_address(ndev, mac_addr);
- 
- 	lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD;
- 	lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;
---- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-@@ -1113,7 +1113,6 @@ static int xemaclite_of_probe(struct pla
- 	struct net_device *ndev = NULL;
- 	struct net_local *lp = NULL;
- 	struct device *dev = &ofdev->dev;
--	const void *mac_address;
- 
- 	int rc = 0;
- 
-@@ -1155,12 +1154,9 @@ static int xemaclite_of_probe(struct pla
- 	lp->next_rx_buf_to_use = 0x0;
- 	lp->tx_ping_pong = get_bool(ofdev, "xlnx,tx-ping-pong");
- 	lp->rx_ping_pong = get_bool(ofdev, "xlnx,rx-ping-pong");
--	mac_address = of_get_mac_address(ofdev->dev.of_node);
- 
--	if (!IS_ERR(mac_address)) {
--		/* Set the MAC address. */
--		ether_addr_copy(ndev->dev_addr, mac_address);
--	} else {
-+	rc = of_get_mac_address(ofdev->dev.of_node, ndev->dev_addr);
-+	if (rc) {
- 		dev_warn(dev, "No MAC address found, using random\n");
- 		eth_hw_addr_random(ndev);
- 	}
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -618,7 +618,6 @@ static int ath9k_of_init(struct ath_soft
- 	struct ath_hw *ah = sc->sc_ah;
- 	struct ath_common *common = ath9k_hw_common(ah);
- 	enum ath_bus_type bus_type = common->bus_ops->ath_bus_type;
--	const char *mac;
- 	char eeprom_name[100];
- 	int ret;
- 
-@@ -641,9 +640,7 @@ static int ath9k_of_init(struct ath_soft
- 		ah->ah_flags |= AH_NO_EEP_SWAP;
- 	}
- 
--	mac = of_get_mac_address(np);
--	if (!IS_ERR(mac))
--		ether_addr_copy(common->macaddr, mac);
-+	of_get_mac_address(np, common->macaddr);
- 
- 	return 0;
- }
---- a/drivers/net/wireless/mediatek/mt76/eeprom.c
-+++ b/drivers/net/wireless/mediatek/mt76/eeprom.c
-@@ -75,17 +75,9 @@ out_put_node:
- void
- mt76_eeprom_override(struct mt76_dev *dev)
- {
--#ifdef CONFIG_OF
- 	struct device_node *np = dev->dev->of_node;
--	const u8 *mac;
- 
--	if (!np)
--		return;
--
--	mac = of_get_mac_address(np);
--	if (!IS_ERR(mac))
--		ether_addr_copy(dev->macaddr, mac);
--#endif
-+	of_get_mac_address(np, dev->macaddr);
- 
- 	if (!is_valid_ether_addr(dev->macaddr)) {
- 		eth_random_addr(dev->macaddr);
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -990,11 +990,7 @@ static void rt2x00lib_rate(struct ieee80
- 
- void rt2x00lib_set_mac_address(struct rt2x00_dev *rt2x00dev, u8 *eeprom_mac_addr)
- {
--	const char *mac_addr;
--
--	mac_addr = of_get_mac_address(rt2x00dev->dev->of_node);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(eeprom_mac_addr, mac_addr);
-+	of_get_mac_address(rt2x00dev->dev->of_node, eeprom_mac_addr);
- 
- 	if (!is_valid_ether_addr(eeprom_mac_addr)) {
- 		eth_random_addr(eeprom_mac_addr);
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -39,37 +39,29 @@ int of_get_phy_mode(struct device_node *
- }
- EXPORT_SYMBOL_GPL(of_get_phy_mode);
- 
--static const void *of_get_mac_addr(struct device_node *np, const char *name)
-+static int of_get_mac_addr(struct device_node *np, const char *name, u8 *addr)
- {
- 	struct property *pp = of_find_property(np, name, NULL);
- 
--	if (pp && pp->length == ETH_ALEN && is_valid_ether_addr(pp->value))
--		return pp->value;
--	return NULL;
-+	if (pp && pp->length == ETH_ALEN && is_valid_ether_addr(pp->value)) {
-+		memcpy(addr, pp->value, ETH_ALEN);
-+		return 0;
-+	}
-+	return -ENODEV;
- }
- 
--static const void *of_get_mac_addr_nvmem(struct device_node *np)
-+static int of_get_mac_addr_nvmem(struct device_node *np, u8 *addr)
- {
--	int ret;
--	const void *mac;
--	u8 nvmem_mac[ETH_ALEN];
- 	struct platform_device *pdev = of_find_device_by_node(np);
-+	int ret;
- 
- 	if (!pdev)
--		return ERR_PTR(-ENODEV);
-+		return -ENODEV;
- 
--	ret = nvmem_get_mac_address(&pdev->dev, &nvmem_mac);
--	if (ret) {
--		put_device(&pdev->dev);
--		return ERR_PTR(ret);
--	}
--
--	mac = devm_kmemdup(&pdev->dev, nvmem_mac, ETH_ALEN, GFP_KERNEL);
-+	ret = nvmem_get_mac_address(&pdev->dev, addr);
- 	put_device(&pdev->dev);
--	if (!mac)
--		return ERR_PTR(-ENOMEM);
- 
--	return mac;
-+	return ret;
- }
- 
- /**
-@@ -92,24 +84,27 @@ static const void *of_get_mac_addr_nvmem
-  * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
-  * but is all zeros.
-  *
-- * Return: Will be a valid pointer on success and ERR_PTR in case of error.
-+ * Return: 0 on success and errno in case of error.
- */
--const void *of_get_mac_address(struct device_node *np)
-+int of_get_mac_address(struct device_node *np, u8 *addr)
- {
--	const void *addr;
--
--	addr = of_get_mac_addr(np, "mac-address");
--	if (addr)
--		return addr;
-+	int ret;
- 
--	addr = of_get_mac_addr(np, "local-mac-address");
--	if (addr)
--		return addr;
-+	if (!np)
-+		return -ENODEV;
- 
--	addr = of_get_mac_addr(np, "address");
--	if (addr)
--		return addr;
-+	ret = of_get_mac_addr(np, "mac-address", addr);
-+	if (!ret)
-+		return 0;
-+
-+	ret = of_get_mac_addr(np, "local-mac-address", addr);
-+	if (!ret)
-+		return 0;
-+
-+	ret = of_get_mac_addr(np, "address", addr);
-+	if (!ret)
-+		return 0;
- 
--	return of_get_mac_addr_nvmem(np);
-+	return of_get_mac_addr_nvmem(np, addr);
- }
- EXPORT_SYMBOL(of_get_mac_address);
---- a/drivers/staging/octeon/ethernet.c
-+++ b/drivers/staging/octeon/ethernet.c
-@@ -407,14 +407,10 @@ static int cvm_oct_common_set_mac_addres
- int cvm_oct_common_init(struct net_device *dev)
- {
- 	struct octeon_ethernet *priv = netdev_priv(dev);
--	const u8 *mac = NULL;
-+	int ret;
- 
--	if (priv->of_node)
--		mac = of_get_mac_address(priv->of_node);
--
--	if (!IS_ERR_OR_NULL(mac))
--		ether_addr_copy(dev->dev_addr, mac);
--	else
-+	ret = of_get_mac_address(priv->of_node, dev->dev_addr);
-+	if (ret)
- 		eth_hw_addr_random(dev);
- 
- 	/*
---- a/include/linux/of_net.h
-+++ b/include/linux/of_net.h
-@@ -11,7 +11,7 @@
- 
- struct net_device;
- extern int of_get_phy_mode(struct device_node *np);
--extern const void *of_get_mac_address(struct device_node *np);
-+extern int of_get_mac_address(struct device_node *np, u8 *mac);
- extern struct net_device *of_find_net_device_by_node(struct device_node *np);
- #else
- static inline int of_get_phy_mode(struct device_node *np)
-@@ -19,9 +19,9 @@ static inline int of_get_phy_mode(struct
- 	return -ENODEV;
- }
- 
--static inline const void *of_get_mac_address(struct device_node *np)
-+static inline int of_get_mac_address(struct device_node *np, u8 *mac)
- {
--	return ERR_PTR(-ENODEV);
-+	return -ENODEV;
- }
- 
- static inline struct net_device *of_find_net_device_by_node(struct device_node *np)
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -186,7 +186,7 @@ struct dsa_port {
- 	unsigned int		index;
- 	const char		*name;
- 	struct dsa_port		*cpu_dp;
--	const char		*mac;
-+	u8			mac[ETH_ALEN];
- 	struct device_node	*dn;
- 	unsigned int		ageing_time;
- 	bool			vlan_filtering;
---- a/net/dsa/dsa2.c
-+++ b/net/dsa/dsa2.c
-@@ -318,7 +318,7 @@ static int dsa_port_setup(struct dsa_por
- 			break;
- 		devlink_port_registered = true;
- 
--		dp->mac = of_get_mac_address(dp->dn);
-+		of_get_mac_address(dp->dn, dp->mac);
- 		err = dsa_slave_create(dp);
- 		if (err)
- 			break;
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -1414,7 +1414,7 @@ int dsa_slave_create(struct dsa_port *po
- 	slave_dev->hw_features |= NETIF_F_HW_TC;
- 	slave_dev->features |= NETIF_F_LLTX;
- 	slave_dev->ethtool_ops = &dsa_slave_ethtool_ops;
--	if (!IS_ERR_OR_NULL(port->mac))
-+	if (!is_zero_ether_addr(port->mac))
- 		ether_addr_copy(slave_dev->dev_addr, port->mac);
- 	else
- 		eth_hw_addr_inherit(slave_dev, master);
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -550,13 +550,14 @@ unsigned char * __weak arch_get_platform
- 
- int eth_platform_get_mac_address(struct device *dev, u8 *mac_addr)
- {
--	const unsigned char *addr = NULL;
-+	unsigned char *addr;
-+	int ret;
- 
--	if (dev->of_node)
--		addr = of_get_mac_address(dev->of_node);
--	if (IS_ERR_OR_NULL(addr))
--		addr = arch_get_platform_mac_address();
-+	ret = of_get_mac_address(dev->of_node, mac_addr);
-+	if (!ret)
-+		return 0;
- 
-+	addr = arch_get_platform_mac_address();
- 	if (!addr)
- 		return -ENODEV;
- 
---- a/drivers/net/usb/smsc75xx.c
-+++ b/drivers/net/usb/smsc75xx.c
-@@ -757,11 +757,12 @@ static int smsc75xx_ioctl(struct net_dev
- 
- static void smsc75xx_init_mac_address(struct usbnet *dev)
- {
--	const u8 *mac_addr;
-+	u8 mac_addr[ETH_ALEN];
-+	int ret;
- 
- 	/* maybe the boot loader passed the MAC address in devicetree */
--	mac_addr = of_get_mac_address(dev->udev->dev.of_node);
--	if (!IS_ERR(mac_addr)) {
-+	ret = of_get_mac_address(dev->udev->dev.of_node, mac_addr);
-+	if (!ret) {
- 		ether_addr_copy(dev->net->dev_addr, mac_addr);
- 		return;
- 	}
---- a/drivers/net/usb/smsc95xx.c
-+++ b/drivers/net/usb/smsc95xx.c
-@@ -901,11 +901,12 @@ static int smsc95xx_ioctl(struct net_dev
- 
- static void smsc95xx_init_mac_address(struct usbnet *dev)
- {
--	const u8 *mac_addr;
-+	u8 mac_addr[ETH_ALEN];
-+	int ret;
- 
- 	/* maybe the boot loader passed the MAC address in devicetree */
--	mac_addr = of_get_mac_address(dev->udev->dev.of_node);
--	if (!IS_ERR(mac_addr)) {
-+	ret = of_get_mac_address(dev->udev->dev.of_node, mac_addr);
-+	if (!ret) {
- 		ether_addr_copy(dev->net->dev_addr, mac_addr);
- 		return;
- 	}
---- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
-+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
-@@ -3444,10 +3444,11 @@ static int bcmgenet_probe(struct platfor
- 	const struct of_device_id *of_id = NULL;
- 	struct bcmgenet_priv *priv;
- 	struct net_device *dev;
--	const void *macaddr;
-+	u8 macaddr[ETH_ALEN];
- 	unsigned int i;
- 	int err = -EIO;
- 	const char *phy_mode_str;
-+	int ret;
- 
- 	/* Up to GENET_MAX_MQ_CNT + 1 TX queues and RX queues */
- 	dev = alloc_etherdev_mqs(sizeof(*priv), GENET_MAX_MQ_CNT + 1,
-@@ -3474,14 +3475,15 @@ static int bcmgenet_probe(struct platfor
- 	}
- 
- 	if (dn) {
--		macaddr = of_get_mac_address(dn);
--		if (IS_ERR(macaddr)) {
-+		ret = of_get_mac_address(dn, macaddr);
-+		if (ret) {
- 			dev_err(&pdev->dev, "can't find MAC address\n");
- 			err = -EINVAL;
- 			goto err;
- 		}
-+		ether_addr_copy(dev->dev_addr, macaddr);
- 	} else {
--		macaddr = pd->mac_address;
-+		ether_addr_copy(dev->dev_addr, pd->mac_address);
- 	}
- 
- 	priv->base = devm_platform_ioremap_resource(pdev, 0);
-@@ -3494,7 +3496,6 @@ static int bcmgenet_probe(struct platfor
- 
- 	SET_NETDEV_DEV(dev, &pdev->dev);
- 	dev_set_drvdata(&pdev->dev, dev);
--	ether_addr_copy(dev->dev_addr, macaddr);
- 	dev->watchdog_timeo = 2 * HZ;
- 	dev->ethtool_ops = &bcmgenet_ethtool_ops;
- 	dev->netdev_ops = &bcmgenet_netdev_ops;
diff --git a/target/linux/generic/backport-5.4/782-net-next-2-of-net-fix-of_get_mac_addr_nvmem-for-non-platform-devices.patch b/target/linux/generic/backport-5.4/782-net-next-2-of-net-fix-of_get_mac_addr_nvmem-for-non-platform-devices.patch
deleted file mode 100644
index c365ac0bb2..0000000000
--- a/target/linux/generic/backport-5.4/782-net-next-2-of-net-fix-of_get_mac_addr_nvmem-for-non-platform-devices.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From f10843e04a075202dbb39dfcee047e3a2fdf5a8d Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 12 Apr 2021 19:47:18 +0200
-Subject: of: net: fix of_get_mac_addr_nvmem() for non-platform devices
-
-of_get_mac_address() already supports fetching the MAC address by an
-nvmem provider. But until now, it was just working for platform devices.
-Esp. it was not working for DSA ports and PCI devices. It gets more
-common that PCI devices have a device tree binding since SoCs contain
-integrated root complexes.
-
-Use the nvmem of_* binding to fetch the nvmem cells by a struct
-device_node. We still have to try to read the cell by device first
-because there might be a nvmem_cell_lookup associated with that device.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/of/of_net.c | 35 ++++++++++++++++++++++++++++++-----
- 1 file changed, 30 insertions(+), 5 deletions(-)
-
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -11,6 +11,7 @@
- #include <linux/phy.h>
- #include <linux/export.h>
- #include <linux/device.h>
-+#include <linux/nvmem-consumer.h>
- 
- /**
-  * of_get_phy_mode - Get phy mode for given device_node
-@@ -53,15 +54,39 @@ static int of_get_mac_addr(struct device
- static int of_get_mac_addr_nvmem(struct device_node *np, u8 *addr)
- {
- 	struct platform_device *pdev = of_find_device_by_node(np);
-+	struct nvmem_cell *cell;
-+	const void *mac;
-+	size_t len;
- 	int ret;
- 
--	if (!pdev)
--		return -ENODEV;
-+	/* Try lookup by device first, there might be a nvmem_cell_lookup
-+	 * associated with a given device.
-+	 */
-+	if (pdev) {
-+		ret = nvmem_get_mac_address(&pdev->dev, addr);
-+		put_device(&pdev->dev);
-+		return ret;
-+	}
-+
-+	cell = of_nvmem_cell_get(np, "mac-address");
-+	if (IS_ERR(cell))
-+		return PTR_ERR(cell);
-+
-+	mac = nvmem_cell_read(cell, &len);
-+	nvmem_cell_put(cell);
-+
-+	if (IS_ERR(mac))
-+		return PTR_ERR(mac);
-+
-+	if (len != ETH_ALEN || !is_valid_ether_addr(mac)) {
-+		kfree(mac);
-+		return -EINVAL;
-+	}
- 
--	ret = nvmem_get_mac_address(&pdev->dev, addr);
--	put_device(&pdev->dev);
-+	memcpy(addr, mac, ETH_ALEN);
-+	kfree(mac);
- 
--	return ret;
-+	return 0;
- }
- 
- /**
diff --git a/target/linux/generic/backport-5.4/790-net-phy-at803x-select-correct-page-on-config-init.patch b/target/linux/generic/backport-5.4/790-net-phy-at803x-select-correct-page-on-config-init.patch
deleted file mode 100644
index b7e3201fb7..0000000000
--- a/target/linux/generic/backport-5.4/790-net-phy-at803x-select-correct-page-on-config-init.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From c329e5afb42ff0a88285eb4d8a391a18793e4777 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Thu, 15 Apr 2021 03:26:50 +0200
-Subject: [PATCH] net: phy: at803x: select correct page on config init
-
-The Atheros AR8031 and AR8033 expose different registers for SGMII/Fiber
-as well as the copper side of the PHY depending on the BT_BX_REG_SEL bit
-in the chip configure register.
-
-The driver assumes the copper side is selected on probe, but this might
-not be the case depending which page was last selected by the
-bootloader. Notably, Ubiquiti UniFi bootloaders show this behavior.
-
-Select the copper page when probing to circumvent this.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 50 +++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 49 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -67,6 +67,9 @@
- #define ATH8035_PHY_ID 0x004dd072
- #define AT803X_PHY_ID_MASK			0xffffffef
- 
-+#define AT803X_PAGE_FIBER		0
-+#define AT803X_PAGE_COPPER		1
-+
- MODULE_DESCRIPTION("Atheros 803x PHY driver");
- MODULE_AUTHOR("Matus Ujhelyi");
- MODULE_LICENSE("GPL");
-@@ -112,6 +115,35 @@ static int at803x_debug_reg_mask(struct
- 	return phy_write(phydev, AT803X_DEBUG_DATA, val);
- }
- 
-+static int at803x_write_page(struct phy_device *phydev, int page)
-+{
-+	int mask;
-+	int set;
-+
-+	if (page == AT803X_PAGE_COPPER) {
-+		set = AT803X_BT_BX_REG_SEL;
-+		mask = 0;
-+	} else {
-+		set = 0;
-+		mask = AT803X_BT_BX_REG_SEL;
-+	}
-+
-+	return __phy_modify(phydev, AT803X_REG_CHIP_CONFIG, mask, set);
-+}
-+
-+static int at803x_read_page(struct phy_device *phydev)
-+{
-+	int ccr = __phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-+
-+	if (ccr < 0)
-+		return ccr;
-+
-+	if (ccr & AT803X_BT_BX_REG_SEL)
-+		return AT803X_PAGE_COPPER;
-+
-+	return AT803X_PAGE_FIBER;
-+}
-+
- static int at803x_enable_rx_delay(struct phy_device *phydev)
- {
- 	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
-@@ -244,6 +276,7 @@ static int at803x_probe(struct phy_devic
- {
- 	struct device *dev = &phydev->mdio.dev;
- 	struct at803x_priv *priv;
-+	int ret = 0;
- 
- 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- 	if (!priv)
-@@ -251,7 +284,16 @@ static int at803x_probe(struct phy_devic
- 
- 	phydev->priv = priv;
- 
--	return 0;
-+	/* Some bootloaders leave the fiber page selected.
-+	 * Switch to the copper page, as otherwise we read
-+	 * the PHY capabilities from the fiber side.
-+	 */
-+	if ((phydev->phy_id & phydev->drv->phy_id_mask) == (ATH8031_PHY_ID & phydev->drv->phy_id_mask)) {
-+		ret = phy_select_page(phydev, AT803X_PAGE_COPPER);
-+		ret = phy_restore_page(phydev, AT803X_PAGE_COPPER, ret);
-+	}
-+
-+	return ret;
- }
- 
- static int at803x_config_init(struct phy_device *phydev)
-@@ -466,6 +508,8 @@ static struct phy_driver at803x_driver[]
- 	.get_wol		= at803x_get_wol,
- 	.suspend		= at803x_suspend,
- 	.resume			= at803x_resume,
-+	.read_page		= at803x_read_page,
-+	.write_page		= at803x_write_page,
- 	/* PHY_GBIT_FEATURES */
- 	.read_status		= at803x_read_status,
- 	.aneg_done		= at803x_aneg_done,
diff --git a/target/linux/generic/backport-5.4/791-net-phy-at803x-fix-probe-error-if-copper-page-is-sel.patch b/target/linux/generic/backport-5.4/791-net-phy-at803x-fix-probe-error-if-copper-page-is-sel.patch
deleted file mode 100644
index ac9583a89e..0000000000
--- a/target/linux/generic/backport-5.4/791-net-phy-at803x-fix-probe-error-if-copper-page-is-sel.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 8f7e876273e294b732b42af2e5e6bba91d798954 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 20 Apr 2021 12:29:29 +0200
-Subject: [PATCH] net: phy: at803x: fix probe error if copper page is selected
-
-The commit c329e5afb42f ("net: phy: at803x: select correct page on
-config init") selects the copper page during probe. This fails if the
-copper page was already selected. In this case, the value of the copper
-page (which is 1) is propagated through phy_restore_page() and is
-finally returned for at803x_probe(). Fix it, by just using the
-at803x_page_write() directly.
-
-Also in case of an error, the regulator is not disabled and leads to a
-WARN_ON() when the probe fails. This couldn't happen before, because
-at803x_parse_dt() was the last call in at803x_probe(). It is hard to
-see, that the parse_dt() actually enables the regulator. Thus move the
-regulator_enable() to the probe function and undo it in case of an
-error.
-
-Fixes: c329e5afb42f ("net: phy: at803x: select correct page on config init")
-Signed-off-by: Michael Walle <michael@walle.cc>
-Reviewed-by: David Bauer <mail@david-bauer.net>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 23 +++++++++++++++++------
- 1 file changed, 17 insertions(+), 6 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -289,8 +289,9 @@ static int at803x_probe(struct phy_devic
- 	 * the PHY capabilities from the fiber side.
- 	 */
- 	if ((phydev->phy_id & phydev->drv->phy_id_mask) == (ATH8031_PHY_ID & phydev->drv->phy_id_mask)) {
--		ret = phy_select_page(phydev, AT803X_PAGE_COPPER);
--		ret = phy_restore_page(phydev, AT803X_PAGE_COPPER, ret);
-+		mutex_lock(&phydev->mdio.bus->mdio_lock);
-+		ret = at803x_write_page(phydev, AT803X_PAGE_COPPER);
-+		mutex_unlock(&phydev->mdio.bus->mdio_lock);
- 	}
- 
- 	return ret;
diff --git a/target/linux/generic/backport-5.4/800-v5.5-iio-imu-Add-support-for-the-FXOS8700-IMU.patch b/target/linux/generic/backport-5.4/800-v5.5-iio-imu-Add-support-for-the-FXOS8700-IMU.patch
deleted file mode 100644
index b9cd276327..0000000000
--- a/target/linux/generic/backport-5.4/800-v5.5-iio-imu-Add-support-for-the-FXOS8700-IMU.patch
+++ /dev/null
@@ -1,893 +0,0 @@
-From 84e5ddd5c46ea3bf0cad670da32028994cad5936 Mon Sep 17 00:00:00 2001
-From: Robert Jones <rjones@gateworks.com>
-Date: Mon, 14 Oct 2019 11:49:21 -0700
-Subject: [PATCH] iio: imu: Add support for the FXOS8700 IMU
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-FXOS8700CQ is a small, low-power, 3-axis linear accelerometer and 3-axis
-magnetometer combined into a single package. The device features a
-selectable I2C or point-to-point SPI serial interface with 14-bit
-accelerometer and 16-bit magnetometer ADC resolution along with
-smart-embedded functions.
-
-FXOS8700CQ has dynamically selectable accelerationfull-scale ranges of
-±2 g/±4 g/±8 g and a fixed magnetic measurement range of ±1200 μT.
-Output data rates (ODR) from 1.563 Hz to 800 Hz are selectable by the user
-for each sensor. Interleaved magnetic and acceleration data is available
-at ODR rates of up to 400 Hz. FXOS8700CQ is available in a plastic QFN
-package and it is guaranteed to operate over the extended temperature
-range of –40 °C to +85 °C.
-
-TODO: Trigger and IRQ configuration support
-
-Datasheet:
-  http://cache.freescale.com/files/sensors/doc/data_sheet/FXOS8700CQ.pdf
-
-Signed-off-by: Robert Jones <rjones@gateworks.com>
-Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
----
- drivers/iio/imu/Kconfig         |  27 ++
- drivers/iio/imu/Makefile        |   5 +
- drivers/iio/imu/fxos8700.h      |  10 +
- drivers/iio/imu/fxos8700_core.c | 649 ++++++++++++++++++++++++++++++++++++++++
- drivers/iio/imu/fxos8700_i2c.c  |  71 +++++
- drivers/iio/imu/fxos8700_spi.c  |  59 ++++
- 6 files changed, 821 insertions(+)
- create mode 100644 drivers/iio/imu/fxos8700.h
- create mode 100644 drivers/iio/imu/fxos8700_core.c
- create mode 100644 drivers/iio/imu/fxos8700_i2c.c
- create mode 100644 drivers/iio/imu/fxos8700_spi.c
-
---- a/drivers/iio/imu/Kconfig
-+++ b/drivers/iio/imu/Kconfig
-@@ -40,6 +40,33 @@ config ADIS16480
- 
- source "drivers/iio/imu/bmi160/Kconfig"
- 
-+config FXOS8700
-+	tristate
-+
-+config FXOS8700_I2C
-+	tristate "NXP FXOS8700 I2C driver"
-+	depends on I2C
-+	select FXOS8700
-+	select REGMAP_I2C
-+	help
-+	  Say yes here to build support for the NXP FXOS8700 m+g combo
-+	  sensor on I2C.
-+
-+	  This driver can also be built as a module. If so, the module will be
-+	  called fxos8700_i2c.
-+
-+config FXOS8700_SPI
-+	tristate "NXP FXOS8700 SPI driver"
-+	depends on SPI
-+	select FXOS8700
-+	select REGMAP_SPI
-+	help
-+	  Say yes here to build support for the NXP FXOS8700 m+g combo
-+	  sensor on SPI.
-+
-+	  This driver can also be built as a module. If so, the module will be
-+	  called fxos8700_spi.
-+
- config KMX61
- 	tristate "Kionix KMX61 6-axis accelerometer and magnetometer"
- 	depends on I2C
---- a/drivers/iio/imu/Makefile
-+++ b/drivers/iio/imu/Makefile
-@@ -14,6 +14,11 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) +
- obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o
- 
- obj-y += bmi160/
-+
-+obj-$(CONFIG_FXOS8700) += fxos8700_core.o
-+obj-$(CONFIG_FXOS8700_I2C) += fxos8700_i2c.o
-+obj-$(CONFIG_FXOS8700_SPI) += fxos8700_spi.o
-+
- obj-y += inv_mpu6050/
- 
- obj-$(CONFIG_KMX61) += kmx61.o
---- /dev/null
-+++ b/drivers/iio/imu/fxos8700.h
-@@ -0,0 +1,10 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+#ifndef FXOS8700_H_
-+#define FXOS8700_H_
-+
-+extern const struct regmap_config fxos8700_regmap_config;
-+
-+int fxos8700_core_probe(struct device *dev, struct regmap *regmap,
-+			const char *name, bool use_spi);
-+
-+#endif  /* FXOS8700_H_ */
---- /dev/null
-+++ b/drivers/iio/imu/fxos8700_core.c
-@@ -0,0 +1,649 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * FXOS8700 - NXP IMU (accelerometer plus magnetometer)
-+ *
-+ * IIO core driver for FXOS8700, with support for I2C/SPI busses
-+ *
-+ * TODO: Buffer, trigger, and IRQ support
-+ */
-+#include <linux/module.h>
-+#include <linux/regmap.h>
-+#include <linux/acpi.h>
-+#include <linux/bitops.h>
-+
-+#include <linux/iio/iio.h>
-+#include <linux/iio/sysfs.h>
-+
-+#include "fxos8700.h"
-+
-+/* Register Definitions */
-+#define FXOS8700_STATUS             0x00
-+#define FXOS8700_OUT_X_MSB          0x01
-+#define FXOS8700_OUT_X_LSB          0x02
-+#define FXOS8700_OUT_Y_MSB          0x03
-+#define FXOS8700_OUT_Y_LSB          0x04
-+#define FXOS8700_OUT_Z_MSB          0x05
-+#define FXOS8700_OUT_Z_LSB          0x06
-+#define FXOS8700_F_SETUP            0x09
-+#define FXOS8700_TRIG_CFG           0x0a
-+#define FXOS8700_SYSMOD             0x0b
-+#define FXOS8700_INT_SOURCE         0x0c
-+#define FXOS8700_WHO_AM_I           0x0d
-+#define FXOS8700_XYZ_DATA_CFG       0x0e
-+#define FXOS8700_HP_FILTER_CUTOFF   0x0f
-+#define FXOS8700_PL_STATUS          0x10
-+#define FXOS8700_PL_CFG             0x11
-+#define FXOS8700_PL_COUNT           0x12
-+#define FXOS8700_PL_BF_ZCOMP        0x13
-+#define FXOS8700_PL_THS_REG         0x14
-+#define FXOS8700_A_FFMT_CFG         0x15
-+#define FXOS8700_A_FFMT_SRC         0x16
-+#define FXOS8700_A_FFMT_THS         0x17
-+#define FXOS8700_A_FFMT_COUNT       0x18
-+#define FXOS8700_TRANSIENT_CFG      0x1d
-+#define FXOS8700_TRANSIENT_SRC      0x1e
-+#define FXOS8700_TRANSIENT_THS      0x1f
-+#define FXOS8700_TRANSIENT_COUNT    0x20
-+#define FXOS8700_PULSE_CFG          0x21
-+#define FXOS8700_PULSE_SRC          0x22
-+#define FXOS8700_PULSE_THSX         0x23
-+#define FXOS8700_PULSE_THSY         0x24
-+#define FXOS8700_PULSE_THSZ         0x25
-+#define FXOS8700_PULSE_TMLT         0x26
-+#define FXOS8700_PULSE_LTCY         0x27
-+#define FXOS8700_PULSE_WIND         0x28
-+#define FXOS8700_ASLP_COUNT         0x29
-+#define FXOS8700_CTRL_REG1          0x2a
-+#define FXOS8700_CTRL_REG2          0x2b
-+#define FXOS8700_CTRL_REG3          0x2c
-+#define FXOS8700_CTRL_REG4          0x2d
-+#define FXOS8700_CTRL_REG5          0x2e
-+#define FXOS8700_OFF_X              0x2f
-+#define FXOS8700_OFF_Y              0x30
-+#define FXOS8700_OFF_Z              0x31
-+#define FXOS8700_M_DR_STATUS        0x32
-+#define FXOS8700_M_OUT_X_MSB        0x33
-+#define FXOS8700_M_OUT_X_LSB        0x34
-+#define FXOS8700_M_OUT_Y_MSB        0x35
-+#define FXOS8700_M_OUT_Y_LSB        0x36
-+#define FXOS8700_M_OUT_Z_MSB        0x37
-+#define FXOS8700_M_OUT_Z_LSB        0x38
-+#define FXOS8700_CMP_X_MSB          0x39
-+#define FXOS8700_CMP_X_LSB          0x3a
-+#define FXOS8700_CMP_Y_MSB          0x3b
-+#define FXOS8700_CMP_Y_LSB          0x3c
-+#define FXOS8700_CMP_Z_MSB          0x3d
-+#define FXOS8700_CMP_Z_LSB          0x3e
-+#define FXOS8700_M_OFF_X_MSB        0x3f
-+#define FXOS8700_M_OFF_X_LSB        0x40
-+#define FXOS8700_M_OFF_Y_MSB        0x41
-+#define FXOS8700_M_OFF_Y_LSB        0x42
-+#define FXOS8700_M_OFF_Z_MSB        0x43
-+#define FXOS8700_M_OFF_Z_LSB        0x44
-+#define FXOS8700_MAX_X_MSB          0x45
-+#define FXOS8700_MAX_X_LSB          0x46
-+#define FXOS8700_MAX_Y_MSB          0x47
-+#define FXOS8700_MAX_Y_LSB          0x48
-+#define FXOS8700_MAX_Z_MSB          0x49
-+#define FXOS8700_MAX_Z_LSB          0x4a
-+#define FXOS8700_MIN_X_MSB          0x4b
-+#define FXOS8700_MIN_X_LSB          0x4c
-+#define FXOS8700_MIN_Y_MSB          0x4d
-+#define FXOS8700_MIN_Y_LSB          0x4e
-+#define FXOS8700_MIN_Z_MSB          0x4f
-+#define FXOS8700_MIN_Z_LSB          0x50
-+#define FXOS8700_TEMP               0x51
-+#define FXOS8700_M_THS_CFG          0x52
-+#define FXOS8700_M_THS_SRC          0x53
-+#define FXOS8700_M_THS_X_MSB        0x54
-+#define FXOS8700_M_THS_X_LSB        0x55
-+#define FXOS8700_M_THS_Y_MSB        0x56
-+#define FXOS8700_M_THS_Y_LSB        0x57
-+#define FXOS8700_M_THS_Z_MSB        0x58
-+#define FXOS8700_M_THS_Z_LSB        0x59
-+#define FXOS8700_M_THS_COUNT        0x5a
-+#define FXOS8700_M_CTRL_REG1        0x5b
-+#define FXOS8700_M_CTRL_REG2        0x5c
-+#define FXOS8700_M_CTRL_REG3        0x5d
-+#define FXOS8700_M_INT_SRC          0x5e
-+#define FXOS8700_A_VECM_CFG         0x5f
-+#define FXOS8700_A_VECM_THS_MSB     0x60
-+#define FXOS8700_A_VECM_THS_LSB     0x61
-+#define FXOS8700_A_VECM_CNT         0x62
-+#define FXOS8700_A_VECM_INITX_MSB   0x63
-+#define FXOS8700_A_VECM_INITX_LSB   0x64
-+#define FXOS8700_A_VECM_INITY_MSB   0x65
-+#define FXOS8700_A_VECM_INITY_LSB   0x66
-+#define FXOS8700_A_VECM_INITZ_MSB   0x67
-+#define FXOS8700_A_VECM_INITZ_LSB   0x68
-+#define FXOS8700_M_VECM_CFG         0x69
-+#define FXOS8700_M_VECM_THS_MSB     0x6a
-+#define FXOS8700_M_VECM_THS_LSB     0x6b
-+#define FXOS8700_M_VECM_CNT         0x6c
-+#define FXOS8700_M_VECM_INITX_MSB   0x6d
-+#define FXOS8700_M_VECM_INITX_LSB   0x6e
-+#define FXOS8700_M_VECM_INITY_MSB   0x6f
-+#define FXOS8700_M_VECM_INITY_LSB   0x70
-+#define FXOS8700_M_VECM_INITZ_MSB   0x71
-+#define FXOS8700_M_VECM_INITZ_LSB   0x72
-+#define FXOS8700_A_FFMT_THS_X_MSB   0x73
-+#define FXOS8700_A_FFMT_THS_X_LSB   0x74
-+#define FXOS8700_A_FFMT_THS_Y_MSB   0x75
-+#define FXOS8700_A_FFMT_THS_Y_LSB   0x76
-+#define FXOS8700_A_FFMT_THS_Z_MSB   0x77
-+#define FXOS8700_A_FFMT_THS_Z_LSB   0x78
-+#define FXOS8700_A_TRAN_INIT_MSB    0x79
-+#define FXOS8700_A_TRAN_INIT_LSB_X  0x7a
-+#define FXOS8700_A_TRAN_INIT_LSB_Y  0x7b
-+#define FXOS8700_A_TRAN_INIT_LSB_Z  0x7d
-+#define FXOS8700_TM_NVM_LOCK        0x7e
-+#define FXOS8700_NVM_DATA0_35       0x80
-+#define FXOS8700_NVM_DATA_BNK3      0xa4
-+#define FXOS8700_NVM_DATA_BNK2      0xa5
-+#define FXOS8700_NVM_DATA_BNK1      0xa6
-+#define FXOS8700_NVM_DATA_BNK0      0xa7
-+
-+/* Bit definitions for FXOS8700_CTRL_REG1 */
-+#define FXOS8700_CTRL_ODR_MSK       0x38
-+#define FXOS8700_CTRL_ODR_MAX       0x00
-+#define FXOS8700_CTRL_ODR_MIN       GENMASK(4, 3)
-+
-+/* Bit definitions for FXOS8700_M_CTRL_REG1 */
-+#define FXOS8700_HMS_MASK           GENMASK(1, 0)
-+#define FXOS8700_OS_MASK            GENMASK(4, 2)
-+
-+/* Bit definitions for FXOS8700_M_CTRL_REG2 */
-+#define FXOS8700_MAXMIN_RST         BIT(2)
-+#define FXOS8700_MAXMIN_DIS_THS     BIT(3)
-+#define FXOS8700_MAXMIN_DIS         BIT(4)
-+
-+#define FXOS8700_ACTIVE             0x01
-+#define FXOS8700_ACTIVE_MIN_USLEEP  4000 /* from table 6 in datasheet */
-+
-+#define FXOS8700_DEVICE_ID          0xC7
-+#define FXOS8700_PRE_DEVICE_ID      0xC4
-+#define FXOS8700_DATA_BUF_SIZE      3
-+
-+struct fxos8700_data {
-+	struct regmap *regmap;
-+	struct iio_trigger *trig;
-+	__be16 buf[FXOS8700_DATA_BUF_SIZE] ____cacheline_aligned;
-+};
-+
-+/* Regmap info */
-+static const struct regmap_range read_range[] = {
-+	{
-+		.range_min = FXOS8700_STATUS,
-+		.range_max = FXOS8700_A_FFMT_COUNT,
-+	}, {
-+		.range_min = FXOS8700_TRANSIENT_CFG,
-+		.range_max = FXOS8700_A_FFMT_THS_Z_LSB,
-+	},
-+};
-+
-+static const struct regmap_range write_range[] = {
-+	{
-+		.range_min = FXOS8700_F_SETUP,
-+		.range_max = FXOS8700_TRIG_CFG,
-+	}, {
-+		.range_min = FXOS8700_XYZ_DATA_CFG,
-+		.range_max = FXOS8700_HP_FILTER_CUTOFF,
-+	}, {
-+		.range_min = FXOS8700_PL_CFG,
-+		.range_max = FXOS8700_A_FFMT_CFG,
-+	}, {
-+		.range_min = FXOS8700_A_FFMT_THS,
-+		.range_max = FXOS8700_TRANSIENT_CFG,
-+	}, {
-+		.range_min = FXOS8700_TRANSIENT_THS,
-+		.range_max = FXOS8700_PULSE_CFG,
-+	}, {
-+		.range_min = FXOS8700_PULSE_THSX,
-+		.range_max = FXOS8700_OFF_Z,
-+	}, {
-+		.range_min = FXOS8700_M_OFF_X_MSB,
-+		.range_max = FXOS8700_M_OFF_Z_LSB,
-+	}, {
-+		.range_min = FXOS8700_M_THS_CFG,
-+		.range_max = FXOS8700_M_THS_CFG,
-+	}, {
-+		.range_min = FXOS8700_M_THS_X_MSB,
-+		.range_max = FXOS8700_M_CTRL_REG3,
-+	}, {
-+		.range_min = FXOS8700_A_VECM_CFG,
-+		.range_max = FXOS8700_A_FFMT_THS_Z_LSB,
-+	},
-+};
-+
-+static const struct regmap_access_table driver_read_table = {
-+	.yes_ranges =   read_range,
-+	.n_yes_ranges = ARRAY_SIZE(read_range),
-+};
-+
-+static const struct regmap_access_table driver_write_table = {
-+	.yes_ranges =   write_range,
-+	.n_yes_ranges = ARRAY_SIZE(write_range),
-+};
-+
-+const struct regmap_config fxos8700_regmap_config = {
-+	.reg_bits = 8,
-+	.val_bits = 8,
-+	.max_register = FXOS8700_NVM_DATA_BNK0,
-+	.rd_table = &driver_read_table,
-+	.wr_table = &driver_write_table,
-+};
-+EXPORT_SYMBOL(fxos8700_regmap_config);
-+
-+#define FXOS8700_CHANNEL(_type, _axis) {			\
-+	.type = _type,						\
-+	.modified = 1,						\
-+	.channel2 = IIO_MOD_##_axis,				\
-+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
-+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |  \
-+		BIT(IIO_CHAN_INFO_SAMP_FREQ),			\
-+}
-+
-+enum fxos8700_accel_scale_bits {
-+	MODE_2G = 0,
-+	MODE_4G,
-+	MODE_8G,
-+};
-+
-+/* scan indexes follow DATA register order */
-+enum fxos8700_scan_axis {
-+	FXOS8700_SCAN_ACCEL_X = 0,
-+	FXOS8700_SCAN_ACCEL_Y,
-+	FXOS8700_SCAN_ACCEL_Z,
-+	FXOS8700_SCAN_MAGN_X,
-+	FXOS8700_SCAN_MAGN_Y,
-+	FXOS8700_SCAN_MAGN_Z,
-+	FXOS8700_SCAN_RHALL,
-+	FXOS8700_SCAN_TIMESTAMP,
-+};
-+
-+enum fxos8700_sensor {
-+	FXOS8700_ACCEL	= 0,
-+	FXOS8700_MAGN,
-+	FXOS8700_NUM_SENSORS /* must be last */
-+};
-+
-+enum fxos8700_int_pin {
-+	FXOS8700_PIN_INT1,
-+	FXOS8700_PIN_INT2
-+};
-+
-+struct fxos8700_scale {
-+	u8 bits;
-+	int uscale;
-+};
-+
-+struct fxos8700_odr {
-+	u8 bits;
-+	int odr;
-+	int uodr;
-+};
-+
-+static const struct fxos8700_scale fxos8700_accel_scale[] = {
-+	{ MODE_2G, 244},
-+	{ MODE_4G, 488},
-+	{ MODE_8G, 976},
-+};
-+
-+/*
-+ * Accellerometer and magnetometer have the same ODR options, set in the
-+ * CTRL_REG1 register. ODR is halved when using both sensors at once in
-+ * hybrid mode.
-+ */
-+static const struct fxos8700_odr fxos8700_odr[] = {
-+	{0x00, 800, 0},
-+	{0x01, 400, 0},
-+	{0x02, 200, 0},
-+	{0x03, 100, 0},
-+	{0x04, 50, 0},
-+	{0x05, 12, 500000},
-+	{0x06, 6, 250000},
-+	{0x07, 1, 562500},
-+};
-+
-+static const struct iio_chan_spec fxos8700_channels[] = {
-+	FXOS8700_CHANNEL(IIO_ACCEL, X),
-+	FXOS8700_CHANNEL(IIO_ACCEL, Y),
-+	FXOS8700_CHANNEL(IIO_ACCEL, Z),
-+	FXOS8700_CHANNEL(IIO_MAGN, X),
-+	FXOS8700_CHANNEL(IIO_MAGN, Y),
-+	FXOS8700_CHANNEL(IIO_MAGN, Z),
-+	IIO_CHAN_SOFT_TIMESTAMP(FXOS8700_SCAN_TIMESTAMP),
-+};
-+
-+static enum fxos8700_sensor fxos8700_to_sensor(enum iio_chan_type iio_type)
-+{
-+	switch (iio_type) {
-+	case IIO_ACCEL:
-+		return FXOS8700_ACCEL;
-+	case IIO_ANGL_VEL:
-+		return FXOS8700_MAGN;
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
-+static int fxos8700_set_active_mode(struct fxos8700_data *data,
-+				    enum fxos8700_sensor t, bool mode)
-+{
-+	int ret;
-+
-+	ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1, mode);
-+	if (ret)
-+		return ret;
-+
-+	usleep_range(FXOS8700_ACTIVE_MIN_USLEEP,
-+		     FXOS8700_ACTIVE_MIN_USLEEP + 1000);
-+
-+	return 0;
-+}
-+
-+static int fxos8700_set_scale(struct fxos8700_data *data,
-+			      enum fxos8700_sensor t, int uscale)
-+{
-+	int i;
-+	static const int scale_num = ARRAY_SIZE(fxos8700_accel_scale);
-+	struct device *dev = regmap_get_device(data->regmap);
-+
-+	if (t == FXOS8700_MAGN) {
-+		dev_err(dev, "Magnetometer scale is locked at 1200uT\n");
-+		return -EINVAL;
-+	}
-+
-+	for (i = 0; i < scale_num; i++)
-+		if (fxos8700_accel_scale[i].uscale == uscale)
-+			break;
-+
-+	if (i == scale_num)
-+		return -EINVAL;
-+
-+	return regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG,
-+			    fxos8700_accel_scale[i].bits);
-+}
-+
-+static int fxos8700_get_scale(struct fxos8700_data *data,
-+			      enum fxos8700_sensor t, int *uscale)
-+{
-+	int i, ret, val;
-+	static const int scale_num = ARRAY_SIZE(fxos8700_accel_scale);
-+
-+	if (t == FXOS8700_MAGN) {
-+		*uscale = 1200; /* Magnetometer is locked at 1200uT */
-+		return 0;
-+	}
-+
-+	ret = regmap_read(data->regmap, FXOS8700_XYZ_DATA_CFG, &val);
-+	if (ret)
-+		return ret;
-+
-+	for (i = 0; i < scale_num; i++) {
-+		if (fxos8700_accel_scale[i].bits == (val & 0x3)) {
-+			*uscale = fxos8700_accel_scale[i].uscale;
-+			return 0;
-+		}
-+	}
-+
-+	return -EINVAL;
-+}
-+
-+static int fxos8700_get_data(struct fxos8700_data *data, int chan_type,
-+			     int axis, int *val)
-+{
-+	u8 base, reg;
-+	int ret;
-+	enum fxos8700_sensor type = fxos8700_to_sensor(chan_type);
-+
-+	base = type ? FXOS8700_OUT_X_MSB : FXOS8700_M_OUT_X_MSB;
-+
-+	/* Block read 6 bytes of device output registers to avoid data loss */
-+	ret = regmap_bulk_read(data->regmap, base, data->buf,
-+			       FXOS8700_DATA_BUF_SIZE);
-+	if (ret)
-+		return ret;
-+
-+	/* Convert axis to buffer index */
-+	reg = axis - IIO_MOD_X;
-+
-+	/* Convert to native endianness */
-+	*val = sign_extend32(be16_to_cpu(data->buf[reg]), 15);
-+
-+	return 0;
-+}
-+
-+static int fxos8700_set_odr(struct fxos8700_data *data, enum fxos8700_sensor t,
-+			    int odr, int uodr)
-+{
-+	int i, ret, val;
-+	bool active_mode;
-+	static const int odr_num = ARRAY_SIZE(fxos8700_odr);
-+
-+	ret = regmap_read(data->regmap, FXOS8700_CTRL_REG1, &val);
-+	if (ret)
-+		return ret;
-+
-+	active_mode = val & FXOS8700_ACTIVE;
-+
-+	if (active_mode) {
-+		/*
-+		 * The device must be in standby mode to change any of the
-+		 * other fields within CTRL_REG1
-+		 */
-+		ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1,
-+				   val & ~FXOS8700_ACTIVE);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	for (i = 0; i < odr_num; i++)
-+		if (fxos8700_odr[i].odr == odr && fxos8700_odr[i].uodr == uodr)
-+			break;
-+
-+	if (i >= odr_num)
-+		return -EINVAL;
-+
-+	return regmap_update_bits(data->regmap,
-+				  FXOS8700_CTRL_REG1,
-+				  FXOS8700_CTRL_ODR_MSK + FXOS8700_ACTIVE,
-+				  fxos8700_odr[i].bits << 3 | active_mode);
-+}
-+
-+static int fxos8700_get_odr(struct fxos8700_data *data, enum fxos8700_sensor t,
-+			    int *odr, int *uodr)
-+{
-+	int i, val, ret;
-+	static const int odr_num = ARRAY_SIZE(fxos8700_odr);
-+
-+	ret = regmap_read(data->regmap, FXOS8700_CTRL_REG1, &val);
-+	if (ret)
-+		return ret;
-+
-+	val &= FXOS8700_CTRL_ODR_MSK;
-+
-+	for (i = 0; i < odr_num; i++)
-+		if (val == fxos8700_odr[i].bits)
-+			break;
-+
-+	if (i >= odr_num)
-+		return -EINVAL;
-+
-+	*odr = fxos8700_odr[i].odr;
-+	*uodr = fxos8700_odr[i].uodr;
-+
-+	return 0;
-+}
-+
-+static int fxos8700_read_raw(struct iio_dev *indio_dev,
-+			     struct iio_chan_spec const *chan,
-+			     int *val, int *val2, long mask)
-+{
-+	int ret;
-+	struct fxos8700_data *data = iio_priv(indio_dev);
-+
-+	switch (mask) {
-+	case IIO_CHAN_INFO_RAW:
-+		ret = fxos8700_get_data(data, chan->type, chan->channel2, val);
-+		if (ret)
-+			return ret;
-+		return IIO_VAL_INT;
-+	case IIO_CHAN_INFO_SCALE:
-+		*val = 0;
-+		ret = fxos8700_get_scale(data, fxos8700_to_sensor(chan->type),
-+					 val2);
-+		return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
-+	case IIO_CHAN_INFO_SAMP_FREQ:
-+		ret = fxos8700_get_odr(data, fxos8700_to_sensor(chan->type),
-+				       val, val2);
-+		return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
-+static int fxos8700_write_raw(struct iio_dev *indio_dev,
-+			      struct iio_chan_spec const *chan,
-+			      int val, int val2, long mask)
-+{
-+	struct fxos8700_data *data = iio_priv(indio_dev);
-+
-+	switch (mask) {
-+	case IIO_CHAN_INFO_SCALE:
-+		return fxos8700_set_scale(data, fxos8700_to_sensor(chan->type),
-+					  val2);
-+	case IIO_CHAN_INFO_SAMP_FREQ:
-+		return fxos8700_set_odr(data, fxos8700_to_sensor(chan->type),
-+					val, val2);
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
-+static IIO_CONST_ATTR(in_accel_sampling_frequency_available,
-+		      "1.5625 6.25 12.5 50 100 200 400 800");
-+static IIO_CONST_ATTR(in_magn_sampling_frequency_available,
-+		      "1.5625 6.25 12.5 50 100 200 400 800");
-+static IIO_CONST_ATTR(in_accel_scale_available, "0.000244 0.000488 0.000976");
-+static IIO_CONST_ATTR(in_magn_scale_available, "0.000001200");
-+
-+static struct attribute *fxos8700_attrs[] = {
-+	&iio_const_attr_in_accel_sampling_frequency_available.dev_attr.attr,
-+	&iio_const_attr_in_magn_sampling_frequency_available.dev_attr.attr,
-+	&iio_const_attr_in_accel_scale_available.dev_attr.attr,
-+	&iio_const_attr_in_magn_scale_available.dev_attr.attr,
-+	NULL,
-+};
-+
-+static const struct attribute_group fxos8700_attrs_group = {
-+	.attrs = fxos8700_attrs,
-+};
-+
-+static const struct iio_info fxos8700_info = {
-+	.read_raw = fxos8700_read_raw,
-+	.write_raw = fxos8700_write_raw,
-+	.attrs = &fxos8700_attrs_group,
-+};
-+
-+static int fxos8700_chip_init(struct fxos8700_data *data, bool use_spi)
-+{
-+	int ret;
-+	unsigned int val;
-+	struct device *dev = regmap_get_device(data->regmap);
-+
-+	ret = regmap_read(data->regmap, FXOS8700_WHO_AM_I, &val);
-+	if (ret) {
-+		dev_err(dev, "Error reading chip id\n");
-+		return ret;
-+	}
-+	if (val != FXOS8700_DEVICE_ID && val != FXOS8700_PRE_DEVICE_ID) {
-+		dev_err(dev, "Wrong chip id, got %x expected %x or %x\n",
-+			val, FXOS8700_DEVICE_ID, FXOS8700_PRE_DEVICE_ID);
-+		return -ENODEV;
-+	}
-+
-+	ret = fxos8700_set_active_mode(data, FXOS8700_ACCEL, true);
-+	if (ret)
-+		return ret;
-+
-+	ret = fxos8700_set_active_mode(data, FXOS8700_MAGN, true);
-+	if (ret)
-+		return ret;
-+
-+	/*
-+	 * The device must be in standby mode to change any of the other fields
-+	 * within CTRL_REG1
-+	 */
-+	ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1, 0x00);
-+	if (ret)
-+		return ret;
-+
-+	/* Set max oversample ratio (OSR) and both devices active */
-+	ret = regmap_write(data->regmap, FXOS8700_M_CTRL_REG1,
-+			   FXOS8700_HMS_MASK | FXOS8700_OS_MASK);
-+	if (ret)
-+		return ret;
-+
-+	/* Disable and rst min/max measurements & threshold */
-+	ret = regmap_write(data->regmap, FXOS8700_M_CTRL_REG2,
-+			   FXOS8700_MAXMIN_RST | FXOS8700_MAXMIN_DIS_THS |
-+			   FXOS8700_MAXMIN_DIS);
-+	if (ret)
-+		return ret;
-+
-+	/* Max ODR (800Hz individual or 400Hz hybrid), active mode */
-+	ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1,
-+			   FXOS8700_CTRL_ODR_MAX | FXOS8700_ACTIVE);
-+	if (ret)
-+		return ret;
-+
-+	/* Set for max full-scale range (+/-8G) */
-+	return regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG, MODE_8G);
-+}
-+
-+static void fxos8700_chip_uninit(void *data)
-+{
-+	struct fxos8700_data *fxos8700_data = data;
-+
-+	fxos8700_set_active_mode(fxos8700_data, FXOS8700_ACCEL, false);
-+	fxos8700_set_active_mode(fxos8700_data, FXOS8700_MAGN, false);
-+}
-+
-+int fxos8700_core_probe(struct device *dev, struct regmap *regmap,
-+			const char *name, bool use_spi)
-+{
-+	struct iio_dev *indio_dev;
-+	struct fxos8700_data *data;
-+	int ret;
-+
-+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
-+	if (!indio_dev)
-+		return -ENOMEM;
-+
-+	data = iio_priv(indio_dev);
-+	dev_set_drvdata(dev, indio_dev);
-+	data->regmap = regmap;
-+
-+	ret = fxos8700_chip_init(data, use_spi);
-+	if (ret)
-+		return ret;
-+
-+	ret = devm_add_action_or_reset(dev, fxos8700_chip_uninit, data);
-+	if (ret)
-+		return ret;
-+
-+	indio_dev->dev.parent = dev;
-+	indio_dev->channels = fxos8700_channels;
-+	indio_dev->num_channels = ARRAY_SIZE(fxos8700_channels);
-+	indio_dev->name = name ? name : "fxos8700";
-+	indio_dev->modes = INDIO_DIRECT_MODE;
-+	indio_dev->info = &fxos8700_info;
-+
-+	return devm_iio_device_register(dev, indio_dev);
-+}
-+EXPORT_SYMBOL_GPL(fxos8700_core_probe);
-+
-+MODULE_AUTHOR("Robert Jones <rjones@gateworks.com>");
-+MODULE_DESCRIPTION("FXOS8700 6-Axis Acc and Mag Combo Sensor driver");
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/drivers/iio/imu/fxos8700_i2c.c
-@@ -0,0 +1,71 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * FXOS8700 - NXP IMU, I2C bits
-+ *
-+ * 7-bit I2C slave address determined by SA1 and SA0 logic level
-+ * inputs represented in the following table:
-+ *      SA1  |  SA0  |  Slave Address
-+ *      0    |  0    |  0x1E
-+ *      0    |  1    |  0x1D
-+ *      1    |  0    |  0x1C
-+ *      1    |  1    |  0x1F
-+ */
-+#include <linux/acpi.h>
-+#include <linux/i2c.h>
-+#include <linux/module.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/regmap.h>
-+
-+#include "fxos8700.h"
-+
-+static int fxos8700_i2c_probe(struct i2c_client *client,
-+			      const struct i2c_device_id *id)
-+{
-+	struct regmap *regmap;
-+	const char *name = NULL;
-+
-+	regmap = devm_regmap_init_i2c(client, &fxos8700_regmap_config);
-+	if (IS_ERR(regmap)) {
-+		dev_err(&client->dev, "Failed to register i2c regmap %d\n",
-+			(int)PTR_ERR(regmap));
-+		return PTR_ERR(regmap);
-+	}
-+
-+	if (id)
-+		name = id->name;
-+
-+	return fxos8700_core_probe(&client->dev, regmap, name, false);
-+}
-+
-+static const struct i2c_device_id fxos8700_i2c_id[] = {
-+	{"fxos8700", 0},
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(i2c, fxos8700_i2c_id);
-+
-+static const struct acpi_device_id fxos8700_acpi_match[] = {
-+	{"FXOS8700", 0},
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(acpi, fxos8700_acpi_match);
-+
-+static const struct of_device_id fxos8700_of_match[] = {
-+	{ .compatible = "nxp,fxos8700" },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(of, fxos8700_of_match);
-+
-+static struct i2c_driver fxos8700_i2c_driver = {
-+	.driver = {
-+		.name                   = "fxos8700_i2c",
-+		.acpi_match_table       = ACPI_PTR(fxos8700_acpi_match),
-+		.of_match_table         = fxos8700_of_match,
-+	},
-+	.probe          = fxos8700_i2c_probe,
-+	.id_table       = fxos8700_i2c_id,
-+};
-+module_i2c_driver(fxos8700_i2c_driver);
-+
-+MODULE_AUTHOR("Robert Jones <rjones@gateworks.com>");
-+MODULE_DESCRIPTION("FXOS8700 I2C driver");
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/drivers/iio/imu/fxos8700_spi.c
-@@ -0,0 +1,59 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * FXOS8700 - NXP IMU, SPI bits
-+ */
-+#include <linux/acpi.h>
-+#include <linux/module.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/regmap.h>
-+#include <linux/spi/spi.h>
-+
-+#include "fxos8700.h"
-+
-+static int fxos8700_spi_probe(struct spi_device *spi)
-+{
-+	struct regmap *regmap;
-+	const struct spi_device_id *id = spi_get_device_id(spi);
-+
-+	regmap = devm_regmap_init_spi(spi, &fxos8700_regmap_config);
-+	if (IS_ERR(regmap)) {
-+		dev_err(&spi->dev, "Failed to register spi regmap %d\n",
-+			(int)PTR_ERR(regmap));
-+		return PTR_ERR(regmap);
-+	}
-+
-+	return fxos8700_core_probe(&spi->dev, regmap, id->name, true);
-+}
-+
-+static const struct spi_device_id fxos8700_spi_id[] = {
-+	{"fxos8700", 0},
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(spi, fxos8700_spi_id);
-+
-+static const struct acpi_device_id fxos8700_acpi_match[] = {
-+	{"FXOS8700", 0},
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(acpi, fxos8700_acpi_match);
-+
-+static const struct of_device_id fxos8700_of_match[] = {
-+	{ .compatible = "nxp,fxos8700" },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(of, fxos8700_of_match);
-+
-+static struct spi_driver fxos8700_spi_driver = {
-+	.probe          = fxos8700_spi_probe,
-+	.id_table       = fxos8700_spi_id,
-+	.driver = {
-+		.acpi_match_table       = ACPI_PTR(fxos8700_acpi_match),
-+		.of_match_table         = fxos8700_of_match,
-+		.name                   = "fxos8700_spi",
-+	},
-+};
-+module_spi_driver(fxos8700_spi_driver);
-+
-+MODULE_AUTHOR("Robert Jones <rjones@gateworks.com>");
-+MODULE_DESCRIPTION("FXOS8700 SPI driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/backport-5.4/800-v5.5-scsi-core-Add-sysfs-attributes-for-VPD-pages-0h-and-.patch b/target/linux/generic/backport-5.4/800-v5.5-scsi-core-Add-sysfs-attributes-for-VPD-pages-0h-and-.patch
deleted file mode 100644
index 2133280e88..0000000000
--- a/target/linux/generic/backport-5.4/800-v5.5-scsi-core-Add-sysfs-attributes-for-VPD-pages-0h-and-.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From d188b0675b21d5a6ca27b3e741381813983f4719 Mon Sep 17 00:00:00 2001
-From: Ryan Attard <ryanattard@ryanattard.info>
-Date: Thu, 26 Sep 2019 11:22:17 -0500
-Subject: [PATCH] scsi: core: Add sysfs attributes for VPD pages 0h and 89h
-
-Add sysfs attributes for the ATA information page and Supported VPD Pages
-page.
-
-Link: https://lore.kernel.org/r/20190926162216.56591-1-ryanattard@ryanattard.info
-Signed-off-by: Ryan Attard <ryanattard@ryanattard.info>
-Reviewed-by: Bart Van Assche <bvanassche@acm.org>
-Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
----
- drivers/scsi/scsi.c        |  4 ++++
- drivers/scsi/scsi_sysfs.c  | 19 +++++++++++++++++++
- include/scsi/scsi_device.h |  2 ++
- 3 files changed, 25 insertions(+)
-
---- a/drivers/scsi/scsi.c
-+++ b/drivers/scsi/scsi.c
-@@ -465,10 +465,14 @@ void scsi_attach_vpd(struct scsi_device
- 		return;
- 
- 	for (i = 4; i < vpd_buf->len; i++) {
-+		if (vpd_buf->data[i] == 0x0)
-+			scsi_update_vpd_page(sdev, 0x0, &sdev->vpd_pg0);
- 		if (vpd_buf->data[i] == 0x80)
- 			scsi_update_vpd_page(sdev, 0x80, &sdev->vpd_pg80);
- 		if (vpd_buf->data[i] == 0x83)
- 			scsi_update_vpd_page(sdev, 0x83, &sdev->vpd_pg83);
-+		if (vpd_buf->data[i] == 0x89)
-+			scsi_update_vpd_page(sdev, 0x89, &sdev->vpd_pg89);
- 	}
- 	kfree(vpd_buf);
- }
---- a/drivers/scsi/scsi_sysfs.c
-+++ b/drivers/scsi/scsi_sysfs.c
-@@ -437,6 +437,7 @@ static void scsi_device_dev_release_user
- 	struct device *parent;
- 	struct list_head *this, *tmp;
- 	struct scsi_vpd *vpd_pg80 = NULL, *vpd_pg83 = NULL;
-+	struct scsi_vpd *vpd_pg0 = NULL, *vpd_pg89 = NULL;
- 	unsigned long flags;
- 	struct module *mod;
- 
-@@ -469,16 +470,24 @@ static void scsi_device_dev_release_user
- 	sdev->request_queue = NULL;
- 
- 	mutex_lock(&sdev->inquiry_mutex);
-+	rcu_swap_protected(sdev->vpd_pg0, vpd_pg0,
-+			   lockdep_is_held(&sdev->inquiry_mutex));
- 	rcu_swap_protected(sdev->vpd_pg80, vpd_pg80,
- 			   lockdep_is_held(&sdev->inquiry_mutex));
- 	rcu_swap_protected(sdev->vpd_pg83, vpd_pg83,
- 			   lockdep_is_held(&sdev->inquiry_mutex));
-+	rcu_swap_protected(sdev->vpd_pg89, vpd_pg89,
-+			   lockdep_is_held(&sdev->inquiry_mutex));
- 	mutex_unlock(&sdev->inquiry_mutex);
- 
-+	if (vpd_pg0)
-+		kfree_rcu(vpd_pg0, rcu);
- 	if (vpd_pg83)
- 		kfree_rcu(vpd_pg83, rcu);
- 	if (vpd_pg80)
- 		kfree_rcu(vpd_pg80, rcu);
-+	if (vpd_pg89)
-+		kfree_rcu(vpd_pg89, rcu);
- 	kfree(sdev->inquiry);
- 	kfree(sdev);
- 
-@@ -891,6 +900,8 @@ static struct bin_attribute dev_attr_vpd
- 
- sdev_vpd_pg_attr(pg83);
- sdev_vpd_pg_attr(pg80);
-+sdev_vpd_pg_attr(pg89);
-+sdev_vpd_pg_attr(pg0);
- 
- static ssize_t show_inquiry(struct file *filep, struct kobject *kobj,
- 			    struct bin_attribute *bin_attr,
-@@ -1223,12 +1234,18 @@ static umode_t scsi_sdev_bin_attr_is_vis
- 	struct scsi_device *sdev = to_scsi_device(dev);
- 
- 
-+	if (attr == &dev_attr_vpd_pg0 && !sdev->vpd_pg0)
-+		return 0;
-+
- 	if (attr == &dev_attr_vpd_pg80 && !sdev->vpd_pg80)
- 		return 0;
- 
- 	if (attr == &dev_attr_vpd_pg83 && !sdev->vpd_pg83)
- 		return 0;
- 
-+	if (attr == &dev_attr_vpd_pg89 && !sdev->vpd_pg89)
-+		return 0;
-+
- 	return S_IRUGO;
- }
- 
-@@ -1271,8 +1288,10 @@ static struct attribute *scsi_sdev_attrs
- };
- 
- static struct bin_attribute *scsi_sdev_bin_attrs[] = {
-+	&dev_attr_vpd_pg0,
- 	&dev_attr_vpd_pg83,
- 	&dev_attr_vpd_pg80,
-+	&dev_attr_vpd_pg89,
- 	&dev_attr_inquiry,
- 	NULL
- };
---- a/include/scsi/scsi_device.h
-+++ b/include/scsi/scsi_device.h
-@@ -140,8 +140,10 @@ struct scsi_device {
- 	const char * rev;		/* ... "nullnullnullnull" before scan */
- 
- #define SCSI_VPD_PG_LEN                255
-+	struct scsi_vpd __rcu *vpd_pg0;
- 	struct scsi_vpd __rcu *vpd_pg83;
- 	struct scsi_vpd __rcu *vpd_pg80;
-+	struct scsi_vpd __rcu *vpd_pg89;
- 	unsigned char current_tag;	/* current tag */
- 	struct scsi_target      *sdev_target;   /* used only for single_lun */
- 
diff --git a/target/linux/generic/backport-5.4/801-v5.5-hwmon-Driver-for-disk-and-solid-state-drives-with-te.patch b/target/linux/generic/backport-5.4/801-v5.5-hwmon-Driver-for-disk-and-solid-state-drives-with-te.patch
deleted file mode 100644
index 32a629772f..0000000000
--- a/target/linux/generic/backport-5.4/801-v5.5-hwmon-Driver-for-disk-and-solid-state-drives-with-te.patch
+++ /dev/null
@@ -1,737 +0,0 @@
-From 5b46903d8bf372e563bf2150d46b87fff197a109 Mon Sep 17 00:00:00 2001
-From: Guenter Roeck <linux@roeck-us.net>
-Date: Thu, 28 Nov 2019 21:34:40 -0800
-Subject: [PATCH] hwmon: Driver for disk and solid state drives with
- temperature sensors
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Reading the temperature of ATA drives has been supported for years
-by userspace tools such as smarttools or hddtemp. The downside of
-such tools is that they need to run with super-user privilege, that
-the temperatures are not reported by standard tools such as 'sensors'
-or 'libsensors', and that drive temperatures are not available for use
-in the kernel's thermal subsystem.
-
-This driver solves this problem by adding support for reading the
-temperature of ATA drives from the kernel using the hwmon API and
-by adding a temperature zone for each drive.
-
-With this driver, the hard disk temperature can be read using the
-unprivileged 'sensors' application:
-
-$ sensors drivetemp-scsi-1-0
-drivetemp-scsi-1-0
-Adapter: SCSI adapter
-temp1:        +23.0°C
-
-or directly from sysfs:
-
-$ grep . /sys/class/hwmon/hwmon9/{name,temp1_input}
-/sys/class/hwmon/hwmon9/name:drivetemp
-/sys/class/hwmon/hwmon9/temp1_input:23000
-
-If the drive supports SCT transport and reports temperature limits,
-those are reported as well.
-
-drivetemp-scsi-0-0
-Adapter: SCSI adapter
-temp1:        +27.0°C  (low  =  +0.0°C, high = +60.0°C)
-                       (crit low = -41.0°C, crit = +85.0°C)
-                       (lowest = +23.0°C, highest = +34.0°C)
-
-The driver attempts to use SCT Command Transport to read the drive
-temperature. If the SCT Command Transport feature set is not available,
-or if it does not report the drive temperature, drive temperatures may
-be readable through SMART attributes. Since SMART attributes are not well
-defined, this method is only used as fallback mechanism.
-
-Cc: Chris Healy <cphealy@gmail.com>
-Cc: Linus Walleij <linus.walleij@linaro.org>
-Cc: Martin K. Petersen <martin.petersen@oracle.com>
-Cc: Bart Van Assche <bvanassche@acm.org>
-Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
-Tested-by: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
----
- Documentation/hwmon/drivetemp.rst |  52 +++
- Documentation/hwmon/index.rst     |   1 +
- drivers/hwmon/Kconfig             |  10 +
- drivers/hwmon/Makefile            |   1 +
- drivers/hwmon/drivetemp.c         | 574 ++++++++++++++++++++++++++++++
- 5 files changed, 638 insertions(+)
- create mode 100644 Documentation/hwmon/drivetemp.rst
- create mode 100644 drivers/hwmon/drivetemp.c
-
---- /dev/null
-+++ b/Documentation/hwmon/drivetemp.rst
-@@ -0,0 +1,52 @@
-+.. SPDX-License-Identifier: GPL-2.0
-+
-+Kernel driver drivetemp
-+=======================
-+
-+
-+References
-+----------
-+
-+ANS T13/1699-D
-+Information technology - AT Attachment 8 - ATA/ATAPI Command Set (ATA8-ACS)
-+
-+ANS Project T10/BSR INCITS 513
-+Information technology - SCSI Primary Commands - 4 (SPC-4)
-+
-+ANS Project INCITS 557
-+Information technology - SCSI / ATA Translation - 5 (SAT-5)
-+
-+
-+Description
-+-----------
-+
-+This driver supports reporting the temperature of disk and solid state
-+drives with temperature sensors.
-+
-+If supported, it uses the ATA SCT Command Transport feature to read
-+the current drive temperature and, if available, temperature limits
-+as well as historic minimum and maximum temperatures. If SCT Command
-+Transport is not supported, the driver uses SMART attributes to read
-+the drive temperature.
-+
-+
-+Sysfs entries
-+-------------
-+
-+Only the temp1_input attribute is always available. Other attributes are
-+available only if reported by the drive. All temperatures are reported in
-+milli-degrees Celsius.
-+
-+=======================	=====================================================
-+temp1_input		Current drive temperature
-+temp1_lcrit		Minimum temperature limit. Operating the device below
-+			this temperature may cause physical damage to the
-+			device.
-+temp1_min		Minimum recommended continuous operating limit
-+temp1_max		Maximum recommended continuous operating temperature
-+temp1_crit		Maximum temperature limit. Operating the device above
-+			this temperature may cause physical damage to the
-+			device.
-+temp1_lowest		Minimum temperature seen this power cycle
-+temp1_highest		Maximum temperature seen this power cycle
-+=======================	=====================================================
---- a/Documentation/hwmon/index.rst
-+++ b/Documentation/hwmon/index.rst
-@@ -45,6 +45,7 @@ Hardware Monitoring Kernel Drivers
-    da9052
-    da9055
-    dme1737
-+   drivetemp
-    ds1621
-    ds620
-    emc1403
---- a/drivers/hwmon/Kconfig
-+++ b/drivers/hwmon/Kconfig
-@@ -385,6 +385,16 @@ config SENSORS_ATXP1
- 	  This driver can also be built as a module. If so, the module
- 	  will be called atxp1.
- 
-+config SENSORS_DRIVETEMP
-+	tristate "Hard disk drives with temperature sensors"
-+	depends on SCSI && ATA
-+	help
-+	  If you say yes you get support for the temperature sensor on
-+	  hard disk drives.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called satatemp.
-+
- config SENSORS_DS620
- 	tristate "Dallas Semiconductor DS620"
- 	depends on I2C
---- a/drivers/hwmon/Makefile
-+++ b/drivers/hwmon/Makefile
-@@ -56,6 +56,7 @@ obj-$(CONFIG_SENSORS_DA9052_ADC)+= da905
- obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o
- obj-$(CONFIG_SENSORS_DELL_SMM)	+= dell-smm-hwmon.o
- obj-$(CONFIG_SENSORS_DME1737)	+= dme1737.o
-+obj-$(CONFIG_SENSORS_DRIVETEMP)	+= drivetemp.o
- obj-$(CONFIG_SENSORS_DS620)	+= ds620.o
- obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
- obj-$(CONFIG_SENSORS_EMC1403)	+= emc1403.o
---- /dev/null
-+++ b/drivers/hwmon/drivetemp.c
-@@ -0,0 +1,574 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Hwmon client for disk and solid state drives with temperature sensors
-+ * Copyright (C) 2019 Zodiac Inflight Innovations
-+ *
-+ * With input from:
-+ *    Hwmon client for S.M.A.R.T. hard disk drives with temperature sensors.
-+ *    (C) 2018 Linus Walleij
-+ *
-+ *    hwmon: Driver for SCSI/ATA temperature sensors
-+ *    by Constantin Baranov <const@mimas.ru>, submitted September 2009
-+ *
-+ * This drive supports reporting the temperatire of SATA drives. It can be
-+ * easily extended to report the temperature of SCSI drives.
-+ *
-+ * The primary means to read drive temperatures and temperature limits
-+ * for ATA drives is the SCT Command Transport feature set as specified in
-+ * ATA8-ACS.
-+ * It can be used to read the current drive temperature, temperature limits,
-+ * and historic minimum and maximum temperatures. The SCT Command Transport
-+ * feature set is documented in "AT Attachment 8 - ATA/ATAPI Command Set
-+ * (ATA8-ACS)".
-+ *
-+ * If the SCT Command Transport feature set is not available, drive temperatures
-+ * may be readable through SMART attributes. Since SMART attributes are not well
-+ * defined, this method is only used as fallback mechanism.
-+ *
-+ * There are three SMART attributes which may report drive temperatures.
-+ * Those are defined as follows (from
-+ * http://www.cropel.com/library/smart-attribute-list.aspx).
-+ *
-+ * 190	Temperature	Temperature, monitored by a sensor somewhere inside
-+ *			the drive. Raw value typicaly holds the actual
-+ *			temperature (hexadecimal) in its rightmost two digits.
-+ *
-+ * 194	Temperature	Temperature, monitored by a sensor somewhere inside
-+ *			the drive. Raw value typicaly holds the actual
-+ *			temperature (hexadecimal) in its rightmost two digits.
-+ *
-+ * 231	Temperature	Temperature, monitored by a sensor somewhere inside
-+ *			the drive. Raw value typicaly holds the actual
-+ *			temperature (hexadecimal) in its rightmost two digits.
-+ *
-+ * Wikipedia defines attributes a bit differently.
-+ *
-+ * 190	Temperature	Value is equal to (100-temp. °C), allowing manufacturer
-+ *	Difference or	to set a minimum threshold which corresponds to a
-+ *	Airflow		maximum temperature. This also follows the convention of
-+ *	Temperature	100 being a best-case value and lower values being
-+ *			undesirable. However, some older drives may instead
-+ *			report raw Temperature (identical to 0xC2) or
-+ *			Temperature minus 50 here.
-+ * 194	Temperature or	Indicates the device temperature, if the appropriate
-+ *	Temperature	sensor is fitted. Lowest byte of the raw value contains
-+ *	Celsius		the exact temperature value (Celsius degrees).
-+ * 231	Life Left	Indicates the approximate SSD life left, in terms of
-+ *	(SSDs) or	program/erase cycles or available reserved blocks.
-+ *	Temperature	A normalized value of 100 represents a new drive, with
-+ *			a threshold value at 10 indicating a need for
-+ *			replacement. A value of 0 may mean that the drive is
-+ *			operating in read-only mode to allow data recovery.
-+ *			Previously (pre-2010) occasionally used for Drive
-+ *			Temperature (more typically reported at 0xC2).
-+ *
-+ * Common denominator is that the first raw byte reports the temperature
-+ * in degrees C on almost all drives. Some drives may report a fractional
-+ * temperature in the second raw byte.
-+ *
-+ * Known exceptions (from libatasmart):
-+ * - SAMSUNG SV0412H and SAMSUNG SV1204H) report the temperature in 10th
-+ *   degrees C in the first two raw bytes.
-+ * - A few Maxtor drives report an unknown or bad value in attribute 194.
-+ * - Certain Apple SSD drives report an unknown value in attribute 190.
-+ *   Only certain firmware versions are affected.
-+ *
-+ * Those exceptions affect older ATA drives and are currently ignored.
-+ * Also, the second raw byte (possibly reporting the fractional temperature)
-+ * is currently ignored.
-+ *
-+ * Many drives also report temperature limits in additional SMART data raw
-+ * bytes. The format of those is not well defined and varies widely.
-+ * The driver does not currently attempt to report those limits.
-+ *
-+ * According to data in smartmontools, attribute 231 is rarely used to report
-+ * drive temperatures. At the same time, several drives report SSD life left
-+ * in attribute 231, but do not support temperature sensors. For this reason,
-+ * attribute 231 is currently ignored.
-+ *
-+ * Following above definitions, temperatures are reported as follows.
-+ *   If SCT Command Transport is supported, it is used to read the
-+ *   temperature and, if available, temperature limits.
-+ * - Otherwise, if SMART attribute 194 is supported, it is used to read
-+ *   the temperature.
-+ * - Otherwise, if SMART attribute 190 is supported, it is used to read
-+ *   the temperature.
-+ */
-+
-+#include <linux/ata.h>
-+#include <linux/bits.h>
-+#include <linux/device.h>
-+#include <linux/hwmon.h>
-+#include <linux/kernel.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <scsi/scsi_cmnd.h>
-+#include <scsi/scsi_device.h>
-+#include <scsi/scsi_driver.h>
-+#include <scsi/scsi_proto.h>
-+
-+struct drivetemp_data {
-+	struct list_head list;		/* list of instantiated devices */
-+	struct mutex lock;		/* protect data buffer accesses */
-+	struct scsi_device *sdev;	/* SCSI device */
-+	struct device *dev;		/* instantiating device */
-+	struct device *hwdev;		/* hardware monitoring device */
-+	u8 smartdata[ATA_SECT_SIZE];	/* local buffer */
-+	int (*get_temp)(struct drivetemp_data *st, u32 attr, long *val);
-+	bool have_temp_lowest;		/* lowest temp in SCT status */
-+	bool have_temp_highest;		/* highest temp in SCT status */
-+	bool have_temp_min;		/* have min temp */
-+	bool have_temp_max;		/* have max temp */
-+	bool have_temp_lcrit;		/* have lower critical limit */
-+	bool have_temp_crit;		/* have critical limit */
-+	int temp_min;			/* min temp */
-+	int temp_max;			/* max temp */
-+	int temp_lcrit;			/* lower critical limit */
-+	int temp_crit;			/* critical limit */
-+};
-+
-+static LIST_HEAD(drivetemp_devlist);
-+
-+#define ATA_MAX_SMART_ATTRS	30
-+#define SMART_TEMP_PROP_190	190
-+#define SMART_TEMP_PROP_194	194
-+
-+#define SCT_STATUS_REQ_ADDR	0xe0
-+#define  SCT_STATUS_VERSION_LOW		0	/* log byte offsets */
-+#define  SCT_STATUS_VERSION_HIGH	1
-+#define  SCT_STATUS_TEMP		200
-+#define  SCT_STATUS_TEMP_LOWEST		201
-+#define  SCT_STATUS_TEMP_HIGHEST	202
-+#define SCT_READ_LOG_ADDR	0xe1
-+#define  SMART_READ_LOG			0xd5
-+#define  SMART_WRITE_LOG		0xd6
-+
-+#define INVALID_TEMP		0x80
-+
-+#define temp_is_valid(temp)	((temp) != INVALID_TEMP)
-+#define temp_from_sct(temp)	(((s8)(temp)) * 1000)
-+
-+static inline bool ata_id_smart_supported(u16 *id)
-+{
-+	return id[ATA_ID_COMMAND_SET_1] & BIT(0);
-+}
-+
-+static inline bool ata_id_smart_enabled(u16 *id)
-+{
-+	return id[ATA_ID_CFS_ENABLE_1] & BIT(0);
-+}
-+
-+static int drivetemp_scsi_command(struct drivetemp_data *st,
-+				 u8 ata_command, u8 feature,
-+				 u8 lba_low, u8 lba_mid, u8 lba_high)
-+{
-+	u8 scsi_cmd[MAX_COMMAND_SIZE];
-+	int data_dir;
-+
-+	memset(scsi_cmd, 0, sizeof(scsi_cmd));
-+	scsi_cmd[0] = ATA_16;
-+	if (ata_command == ATA_CMD_SMART && feature == SMART_WRITE_LOG) {
-+		scsi_cmd[1] = (5 << 1);	/* PIO Data-out */
-+		/*
-+		 * No off.line or cc, write to dev, block count in sector count
-+		 * field.
-+		 */
-+		scsi_cmd[2] = 0x06;
-+		data_dir = DMA_TO_DEVICE;
-+	} else {
-+		scsi_cmd[1] = (4 << 1);	/* PIO Data-in */
-+		/*
-+		 * No off.line or cc, read from dev, block count in sector count
-+		 * field.
-+		 */
-+		scsi_cmd[2] = 0x0e;
-+		data_dir = DMA_FROM_DEVICE;
-+	}
-+	scsi_cmd[4] = feature;
-+	scsi_cmd[6] = 1;	/* 1 sector */
-+	scsi_cmd[8] = lba_low;
-+	scsi_cmd[10] = lba_mid;
-+	scsi_cmd[12] = lba_high;
-+	scsi_cmd[14] = ata_command;
-+
-+	return scsi_execute_req(st->sdev, scsi_cmd, data_dir,
-+				st->smartdata, ATA_SECT_SIZE, NULL, HZ, 5,
-+				NULL);
-+}
-+
-+static int drivetemp_ata_command(struct drivetemp_data *st, u8 feature,
-+				 u8 select)
-+{
-+	return drivetemp_scsi_command(st, ATA_CMD_SMART, feature, select,
-+				     ATA_SMART_LBAM_PASS, ATA_SMART_LBAH_PASS);
-+}
-+
-+static int drivetemp_get_smarttemp(struct drivetemp_data *st, u32 attr,
-+				  long *temp)
-+{
-+	u8 *buf = st->smartdata;
-+	bool have_temp = false;
-+	u8 temp_raw;
-+	u8 csum;
-+	int err;
-+	int i;
-+
-+	err = drivetemp_ata_command(st, ATA_SMART_READ_VALUES, 0);
-+	if (err)
-+		return err;
-+
-+	/* Checksum the read value table */
-+	csum = 0;
-+	for (i = 0; i < ATA_SECT_SIZE; i++)
-+		csum += buf[i];
-+	if (csum) {
-+		dev_dbg(&st->sdev->sdev_gendev,
-+			"checksum error reading SMART values\n");
-+		return -EIO;
-+	}
-+
-+	for (i = 0; i < ATA_MAX_SMART_ATTRS; i++) {
-+		u8 *attr = buf + i * 12;
-+		int id = attr[2];
-+
-+		if (!id)
-+			continue;
-+
-+		if (id == SMART_TEMP_PROP_190) {
-+			temp_raw = attr[7];
-+			have_temp = true;
-+		}
-+		if (id == SMART_TEMP_PROP_194) {
-+			temp_raw = attr[7];
-+			have_temp = true;
-+			break;
-+		}
-+	}
-+
-+	if (have_temp) {
-+		*temp = temp_raw * 1000;
-+		return 0;
-+	}
-+
-+	return -ENXIO;
-+}
-+
-+static int drivetemp_get_scttemp(struct drivetemp_data *st, u32 attr, long *val)
-+{
-+	u8 *buf = st->smartdata;
-+	int err;
-+
-+	err = drivetemp_ata_command(st, SMART_READ_LOG, SCT_STATUS_REQ_ADDR);
-+	if (err)
-+		return err;
-+	switch (attr) {
-+	case hwmon_temp_input:
-+		*val = temp_from_sct(buf[SCT_STATUS_TEMP]);
-+		break;
-+	case hwmon_temp_lowest:
-+		*val = temp_from_sct(buf[SCT_STATUS_TEMP_LOWEST]);
-+		break;
-+	case hwmon_temp_highest:
-+		*val = temp_from_sct(buf[SCT_STATUS_TEMP_HIGHEST]);
-+		break;
-+	default:
-+		err = -EINVAL;
-+		break;
-+	}
-+	return err;
-+}
-+
-+static int drivetemp_identify_sata(struct drivetemp_data *st)
-+{
-+	struct scsi_device *sdev = st->sdev;
-+	u8 *buf = st->smartdata;
-+	struct scsi_vpd *vpd;
-+	bool is_ata, is_sata;
-+	bool have_sct_data_table;
-+	bool have_sct_temp;
-+	bool have_smart;
-+	bool have_sct;
-+	u16 *ata_id;
-+	u16 version;
-+	long temp;
-+	int err;
-+
-+	/* SCSI-ATA Translation present? */
-+	rcu_read_lock();
-+	vpd = rcu_dereference(sdev->vpd_pg89);
-+
-+	/*
-+	 * Verify that ATA IDENTIFY DEVICE data is included in ATA Information
-+	 * VPD and that the drive implements the SATA protocol.
-+	 */
-+	if (!vpd || vpd->len < 572 || vpd->data[56] != ATA_CMD_ID_ATA ||
-+	    vpd->data[36] != 0x34) {
-+		rcu_read_unlock();
-+		return -ENODEV;
-+	}
-+	ata_id = (u16 *)&vpd->data[60];
-+	is_ata = ata_id_is_ata(ata_id);
-+	is_sata = ata_id_is_sata(ata_id);
-+	have_sct = ata_id_sct_supported(ata_id);
-+	have_sct_data_table = ata_id_sct_data_tables(ata_id);
-+	have_smart = ata_id_smart_supported(ata_id) &&
-+				ata_id_smart_enabled(ata_id);
-+
-+	rcu_read_unlock();
-+
-+	/* bail out if this is not a SATA device */
-+	if (!is_ata || !is_sata)
-+		return -ENODEV;
-+	if (!have_sct)
-+		goto skip_sct;
-+
-+	err = drivetemp_ata_command(st, SMART_READ_LOG, SCT_STATUS_REQ_ADDR);
-+	if (err)
-+		goto skip_sct;
-+
-+	version = (buf[SCT_STATUS_VERSION_HIGH] << 8) |
-+		  buf[SCT_STATUS_VERSION_LOW];
-+	if (version != 2 && version != 3)
-+		goto skip_sct;
-+
-+	have_sct_temp = temp_is_valid(buf[SCT_STATUS_TEMP]);
-+	if (!have_sct_temp)
-+		goto skip_sct;
-+
-+	st->have_temp_lowest = temp_is_valid(buf[SCT_STATUS_TEMP_LOWEST]);
-+	st->have_temp_highest = temp_is_valid(buf[SCT_STATUS_TEMP_HIGHEST]);
-+
-+	if (!have_sct_data_table)
-+		goto skip_sct;
-+
-+	/* Request and read temperature history table */
-+	memset(buf, '\0', sizeof(st->smartdata));
-+	buf[0] = 5;	/* data table command */
-+	buf[2] = 1;	/* read table */
-+	buf[4] = 2;	/* temperature history table */
-+
-+	err = drivetemp_ata_command(st, SMART_WRITE_LOG, SCT_STATUS_REQ_ADDR);
-+	if (err)
-+		goto skip_sct_data;
-+
-+	err = drivetemp_ata_command(st, SMART_READ_LOG, SCT_READ_LOG_ADDR);
-+	if (err)
-+		goto skip_sct_data;
-+
-+	/*
-+	 * Temperature limits per AT Attachment 8 -
-+	 * ATA/ATAPI Command Set (ATA8-ACS)
-+	 */
-+	st->have_temp_max = temp_is_valid(buf[6]);
-+	st->have_temp_crit = temp_is_valid(buf[7]);
-+	st->have_temp_min = temp_is_valid(buf[8]);
-+	st->have_temp_lcrit = temp_is_valid(buf[9]);
-+
-+	st->temp_max = temp_from_sct(buf[6]);
-+	st->temp_crit = temp_from_sct(buf[7]);
-+	st->temp_min = temp_from_sct(buf[8]);
-+	st->temp_lcrit = temp_from_sct(buf[9]);
-+
-+skip_sct_data:
-+	if (have_sct_temp) {
-+		st->get_temp = drivetemp_get_scttemp;
-+		return 0;
-+	}
-+skip_sct:
-+	if (!have_smart)
-+		return -ENODEV;
-+	st->get_temp = drivetemp_get_smarttemp;
-+	return drivetemp_get_smarttemp(st, hwmon_temp_input, &temp);
-+}
-+
-+static int drivetemp_identify(struct drivetemp_data *st)
-+{
-+	struct scsi_device *sdev = st->sdev;
-+
-+	/* Bail out immediately if there is no inquiry data */
-+	if (!sdev->inquiry || sdev->inquiry_len < 16)
-+		return -ENODEV;
-+
-+	/* Disk device? */
-+	if (sdev->type != TYPE_DISK && sdev->type != TYPE_ZBC)
-+		return -ENODEV;
-+
-+	return drivetemp_identify_sata(st);
-+}
-+
-+static int drivetemp_read(struct device *dev, enum hwmon_sensor_types type,
-+			 u32 attr, int channel, long *val)
-+{
-+	struct drivetemp_data *st = dev_get_drvdata(dev);
-+	int err = 0;
-+
-+	if (type != hwmon_temp)
-+		return -EINVAL;
-+
-+	switch (attr) {
-+	case hwmon_temp_input:
-+	case hwmon_temp_lowest:
-+	case hwmon_temp_highest:
-+		mutex_lock(&st->lock);
-+		err = st->get_temp(st, attr, val);
-+		mutex_unlock(&st->lock);
-+		break;
-+	case hwmon_temp_lcrit:
-+		*val = st->temp_lcrit;
-+		break;
-+	case hwmon_temp_min:
-+		*val = st->temp_min;
-+		break;
-+	case hwmon_temp_max:
-+		*val = st->temp_max;
-+		break;
-+	case hwmon_temp_crit:
-+		*val = st->temp_crit;
-+		break;
-+	default:
-+		err = -EINVAL;
-+		break;
-+	}
-+	return err;
-+}
-+
-+static umode_t drivetemp_is_visible(const void *data,
-+				   enum hwmon_sensor_types type,
-+				   u32 attr, int channel)
-+{
-+	const struct drivetemp_data *st = data;
-+
-+	switch (type) {
-+	case hwmon_temp:
-+		switch (attr) {
-+		case hwmon_temp_input:
-+			return 0444;
-+		case hwmon_temp_lowest:
-+			if (st->have_temp_lowest)
-+				return 0444;
-+			break;
-+		case hwmon_temp_highest:
-+			if (st->have_temp_highest)
-+				return 0444;
-+			break;
-+		case hwmon_temp_min:
-+			if (st->have_temp_min)
-+				return 0444;
-+			break;
-+		case hwmon_temp_max:
-+			if (st->have_temp_max)
-+				return 0444;
-+			break;
-+		case hwmon_temp_lcrit:
-+			if (st->have_temp_lcrit)
-+				return 0444;
-+			break;
-+		case hwmon_temp_crit:
-+			if (st->have_temp_crit)
-+				return 0444;
-+			break;
-+		default:
-+			break;
-+		}
-+		break;
-+	default:
-+		break;
-+	}
-+	return 0;
-+}
-+
-+static const struct hwmon_channel_info *drivetemp_info[] = {
-+	HWMON_CHANNEL_INFO(chip,
-+			   HWMON_C_REGISTER_TZ),
-+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT |
-+			   HWMON_T_LOWEST | HWMON_T_HIGHEST |
-+			   HWMON_T_MIN | HWMON_T_MAX |
-+			   HWMON_T_LCRIT | HWMON_T_CRIT),
-+	NULL
-+};
-+
-+static const struct hwmon_ops drivetemp_ops = {
-+	.is_visible = drivetemp_is_visible,
-+	.read = drivetemp_read,
-+};
-+
-+static const struct hwmon_chip_info drivetemp_chip_info = {
-+	.ops = &drivetemp_ops,
-+	.info = drivetemp_info,
-+};
-+
-+/*
-+ * The device argument points to sdev->sdev_dev. Its parent is
-+ * sdev->sdev_gendev, which we can use to get the scsi_device pointer.
-+ */
-+static int drivetemp_add(struct device *dev, struct class_interface *intf)
-+{
-+	struct scsi_device *sdev = to_scsi_device(dev->parent);
-+	struct drivetemp_data *st;
-+	int err;
-+
-+	st = kzalloc(sizeof(*st), GFP_KERNEL);
-+	if (!st)
-+		return -ENOMEM;
-+
-+	st->sdev = sdev;
-+	st->dev = dev;
-+	mutex_init(&st->lock);
-+
-+	if (drivetemp_identify(st)) {
-+		err = -ENODEV;
-+		goto abort;
-+	}
-+
-+	st->hwdev = hwmon_device_register_with_info(dev->parent, "drivetemp",
-+						    st, &drivetemp_chip_info,
-+						    NULL);
-+	if (IS_ERR(st->hwdev)) {
-+		err = PTR_ERR(st->hwdev);
-+		goto abort;
-+	}
-+
-+	list_add(&st->list, &drivetemp_devlist);
-+	return 0;
-+
-+abort:
-+	kfree(st);
-+	return err;
-+}
-+
-+static void drivetemp_remove(struct device *dev, struct class_interface *intf)
-+{
-+	struct drivetemp_data *st, *tmp;
-+
-+	list_for_each_entry_safe(st, tmp, &drivetemp_devlist, list) {
-+		if (st->dev == dev) {
-+			list_del(&st->list);
-+			hwmon_device_unregister(st->hwdev);
-+			kfree(st);
-+			break;
-+		}
-+	}
-+}
-+
-+static struct class_interface drivetemp_interface = {
-+	.add_dev = drivetemp_add,
-+	.remove_dev = drivetemp_remove,
-+};
-+
-+static int __init drivetemp_init(void)
-+{
-+	return scsi_register_interface(&drivetemp_interface);
-+}
-+
-+static void __exit drivetemp_exit(void)
-+{
-+	scsi_unregister_interface(&drivetemp_interface);
-+}
-+
-+module_init(drivetemp_init);
-+module_exit(drivetemp_exit);
-+
-+MODULE_AUTHOR("Guenter Roeck <linus@roeck-us.net>");
-+MODULE_DESCRIPTION("Hard drive temperature monitor");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-5.4/801-v5.6-leds-populate-the-device-s-of_node.patch b/target/linux/generic/backport-5.4/801-v5.6-leds-populate-the-device-s-of_node.patch
deleted file mode 100644
index 5c3b58c436..0000000000
--- a/target/linux/generic/backport-5.4/801-v5.6-leds-populate-the-device-s-of_node.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 7a349e8c535d7327bf80710323c725df47149b8d Mon Sep 17 00:00:00 2001
-From: Jean-Jacques Hiblot <jjhiblot@ti.com>
-Date: Sun, 5 Jan 2020 23:31:14 +0100
-Subject: [PATCH] leds: populate the device's of_node
-
-If initialization data is available and its fwnode is actually a
-of_node, store this information in the led device's structure. This
-will allow the device to use or provide OF-based API such (devm_xxx).
-
-Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
-[backport to 5.4]
----
-
---- a/drivers/leds/led-class.c
-+++ b/drivers/leds/led-class.c
-@@ -19,6 +19,7 @@
- #include <linux/spinlock.h>
- #include <linux/timer.h>
- #include <uapi/linux/uleds.h>
-+#include <linux/of.h>
- #include "leds.h"
- 
- static struct class *leds_class;
-@@ -277,8 +278,10 @@ int led_classdev_register_ext(struct dev
- 		mutex_unlock(&led_cdev->led_access);
- 		return PTR_ERR(led_cdev->dev);
- 	}
--	if (init_data && init_data->fwnode)
-+	if (init_data && init_data->fwnode) {
- 		led_cdev->dev->fwnode = init_data->fwnode;
-+		led_cdev->dev->of_node = to_of_node(init_data->fwnode);
-+	}
- 
- 	if (ret)
- 		dev_warn(parent, "Led %s renamed to %s due to name collision",
diff --git a/target/linux/generic/backport-5.4/803-v5.8-i2c-pxa-use-official-address-byte-helper.patch b/target/linux/generic/backport-5.4/803-v5.8-i2c-pxa-use-official-address-byte-helper.patch
deleted file mode 100644
index a937b52d9d..0000000000
--- a/target/linux/generic/backport-5.4/803-v5.8-i2c-pxa-use-official-address-byte-helper.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Cc: linux-i2c@vger.kernel.org
-Subject: [PATCH 01/17] i2c: pxa: use official address byte helper
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-i2c-pxa was created before i2c_8bit_addr_from_msg() was implemented,
-and used its own i2c_pxa_addr_byte() which is functionally the same.
-Sadly, it was never updated to use this new helper. Switch it over.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 21 +++++++--------------
- 1 file changed, 7 insertions(+), 14 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -674,16 +674,6 @@ static void i2c_pxa_slave_stop(struct px
-  * PXA I2C Master mode
-  */
- 
--static inline unsigned int i2c_pxa_addr_byte(struct i2c_msg *msg)
--{
--	unsigned int addr = (msg->addr & 0x7f) << 1;
--
--	if (msg->flags & I2C_M_RD)
--		addr |= 1;
--
--	return addr;
--}
--
- static inline void i2c_pxa_start_message(struct pxa_i2c *i2c)
- {
- 	u32 icr;
-@@ -691,8 +681,8 @@ static inline void i2c_pxa_start_message
- 	/*
- 	 * Step 1: target slave address into IDBR
- 	 */
--	writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c));
--	i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg);
-+	i2c->req_slave_addr = i2c_8bit_addr_from_msg(i2c->msg);
-+	writel(i2c->req_slave_addr, _IDBR(i2c));
- 
- 	/*
- 	 * Step 2: initiate the write.
-@@ -1003,8 +993,8 @@ static void i2c_pxa_irq_txempty(struct p
- 		/*
- 		 * Write the next address.
- 		 */
--		writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c));
--		i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg);
-+		i2c->req_slave_addr = i2c_8bit_addr_from_msg(i2c->msg);
-+		writel(i2c->req_slave_addr, _IDBR(i2c));
- 
- 		/*
- 		 * And trigger a repeated start, and send the byte.
diff --git a/target/linux/generic/backport-5.4/804-v5.8-i2c-pxa-remove-unneeded-includes.patch b/target/linux/generic/backport-5.4/804-v5.8-i2c-pxa-remove-unneeded-includes.patch
deleted file mode 100644
index 6a911325dd..0000000000
--- a/target/linux/generic/backport-5.4/804-v5.8-i2c-pxa-remove-unneeded-includes.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Cc: linux-i2c@vger.kernel.org
-Subject: [PATCH 02/17] i2c: pxa: remove unneeded includes
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-i2c-pxa does not need linux/sched.h nor linux/time.h includes, so
-remove these.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 4 ----
- 1 file changed, 4 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -20,8 +20,6 @@
- #include <linux/module.h>
- #include <linux/i2c.h>
- #include <linux/init.h>
--#include <linux/time.h>
--#include <linux/sched.h>
- #include <linux/delay.h>
- #include <linux/errno.h>
- #include <linux/interrupt.h>
-@@ -35,8 +33,6 @@
- #include <linux/io.h>
- #include <linux/platform_data/i2c-pxa.h>
- 
--#include <asm/irq.h>
--
- struct pxa_reg_layout {
- 	u32 ibmr;
- 	u32 idbr;
diff --git a/target/linux/generic/backport-5.4/805-v5.8-i2c-pxa-re-arrange-includes-to-be-in-alphabetical-or.patch b/target/linux/generic/backport-5.4/805-v5.8-i2c-pxa-re-arrange-includes-to-be-in-alphabetical-or.patch
deleted file mode 100644
index 4d6dc7f071..0000000000
--- a/target/linux/generic/backport-5.4/805-v5.8-i2c-pxa-re-arrange-includes-to-be-in-alphabetical-or.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Cc: linux-i2c@vger.kernel.org
-Subject: [PATCH 03/17] i2c: pxa: re-arrange includes to be in alphabetical
- order
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Arrange the includes to be in alphabetical order to help avoid
-duplicated includes.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 18 +++++++++---------
- 1 file changed, 9 insertions(+), 9 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -16,22 +16,22 @@
-  *    Dec 2004: Added support for PXA27x and slave device probing [Liam Girdwood]
-  *    Feb 2005: Rework slave mode handling [RMK]
-  */
--#include <linux/kernel.h>
--#include <linux/module.h>
--#include <linux/i2c.h>
--#include <linux/init.h>
-+#include <linux/clk.h>
- #include <linux/delay.h>
-+#include <linux/err.h>
- #include <linux/errno.h>
--#include <linux/interrupt.h>
-+#include <linux/i2c.h>
- #include <linux/i2c-pxa.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
- #include <linux/platform_device.h>
--#include <linux/err.h>
--#include <linux/clk.h>
--#include <linux/slab.h>
--#include <linux/io.h>
- #include <linux/platform_data/i2c-pxa.h>
-+#include <linux/slab.h>
- 
- struct pxa_reg_layout {
- 	u32 ibmr;
diff --git a/target/linux/generic/backport-5.4/806-v5.8-i2c-pxa-re-arrange-functions-to-flow-better.patch b/target/linux/generic/backport-5.4/806-v5.8-i2c-pxa-re-arrange-functions-to-flow-better.patch
deleted file mode 100644
index 9f09f9dacb..0000000000
--- a/target/linux/generic/backport-5.4/806-v5.8-i2c-pxa-re-arrange-functions-to-flow-better.patch
+++ /dev/null
@@ -1,380 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Cc: linux-i2c@vger.kernel.org
-Subject: [PATCH 04/17] i2c: pxa: re-arrange functions to flow better
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Re-arrange the PXA I2C code to avoid forward declarations, and keep
-similar functionality (e.g. the non-IRQ mode support) together. This
-improves code readability.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 325 +++++++++++++++++------------------
- 1 file changed, 162 insertions(+), 163 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -326,7 +326,6 @@ static void i2c_pxa_scream_blue_murder(s
- #endif /* ifdef DEBUG / else */
- 
- static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret);
--static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id);
- 
- static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
- {
-@@ -697,34 +696,6 @@ static inline void i2c_pxa_stop_message(
- 	writel(icr, _ICR(i2c));
- }
- 
--static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c)
--{
--	/* make timeout the same as for interrupt based functions */
--	long timeout = 2 * DEF_TIMEOUT;
--
--	/*
--	 * Wait for the bus to become free.
--	 */
--	while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) {
--		udelay(1000);
--		show_state(i2c);
--	}
--
--	if (timeout < 0) {
--		show_state(i2c);
--		dev_err(&i2c->adap.dev,
--			"i2c_pxa: timeout waiting for bus free\n");
--		return I2C_RETRY;
--	}
--
--	/*
--	 * Set master mode.
--	 */
--	writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c));
--
--	return 0;
--}
--
- /*
-  * PXA I2C send master code
-  * 1. Load master code to IDBR and send it.
-@@ -753,140 +724,6 @@ static int i2c_pxa_send_mastercode(struc
- 	return (timeout == 0) ? I2C_RETRY : 0;
- }
- 
--static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c,
--			       struct i2c_msg *msg, int num)
--{
--	unsigned long timeout = 500000; /* 5 seconds */
--	int ret = 0;
--
--	ret = i2c_pxa_pio_set_master(i2c);
--	if (ret)
--		goto out;
--
--	i2c->msg = msg;
--	i2c->msg_num = num;
--	i2c->msg_idx = 0;
--	i2c->msg_ptr = 0;
--	i2c->irqlogidx = 0;
--
--	i2c_pxa_start_message(i2c);
--
--	while (i2c->msg_num > 0 && --timeout) {
--		i2c_pxa_handler(0, i2c);
--		udelay(10);
--	}
--
--	i2c_pxa_stop_message(i2c);
--
--	/*
--	 * We place the return code in i2c->msg_idx.
--	 */
--	ret = i2c->msg_idx;
--
--out:
--	if (timeout == 0) {
--		i2c_pxa_scream_blue_murder(i2c, "timeout");
--		ret = I2C_RETRY;
--	}
--
--	return ret;
--}
--
--/*
-- * We are protected by the adapter bus mutex.
-- */
--static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
--{
--	long timeout;
--	int ret;
--
--	/*
--	 * Wait for the bus to become free.
--	 */
--	ret = i2c_pxa_wait_bus_not_busy(i2c);
--	if (ret) {
--		dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n");
--		goto out;
--	}
--
--	/*
--	 * Set master mode.
--	 */
--	ret = i2c_pxa_set_master(i2c);
--	if (ret) {
--		dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret);
--		goto out;
--	}
--
--	if (i2c->high_mode) {
--		ret = i2c_pxa_send_mastercode(i2c);
--		if (ret) {
--			dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n");
--			goto out;
--			}
--	}
--
--	spin_lock_irq(&i2c->lock);
--
--	i2c->msg = msg;
--	i2c->msg_num = num;
--	i2c->msg_idx = 0;
--	i2c->msg_ptr = 0;
--	i2c->irqlogidx = 0;
--
--	i2c_pxa_start_message(i2c);
--
--	spin_unlock_irq(&i2c->lock);
--
--	/*
--	 * The rest of the processing occurs in the interrupt handler.
--	 */
--	timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
--	i2c_pxa_stop_message(i2c);
--
--	/*
--	 * We place the return code in i2c->msg_idx.
--	 */
--	ret = i2c->msg_idx;
--
--	if (!timeout && i2c->msg_num) {
--		i2c_pxa_scream_blue_murder(i2c, "timeout");
--		ret = I2C_RETRY;
--	}
--
-- out:
--	return ret;
--}
--
--static int i2c_pxa_pio_xfer(struct i2c_adapter *adap,
--			    struct i2c_msg msgs[], int num)
--{
--	struct pxa_i2c *i2c = adap->algo_data;
--	int ret, i;
--
--	/* If the I2C controller is disabled we need to reset it
--	  (probably due to a suspend/resume destroying state). We do
--	  this here as we can then avoid worrying about resuming the
--	  controller before its users. */
--	if (!(readl(_ICR(i2c)) & ICR_IUE))
--		i2c_pxa_reset(i2c);
--
--	for (i = adap->retries; i >= 0; i--) {
--		ret = i2c_pxa_do_pio_xfer(i2c, msgs, num);
--		if (ret != I2C_RETRY)
--			goto out;
--
--		if (i2c_debug)
--			dev_dbg(&adap->dev, "Retrying transmission\n");
--		udelay(100);
--	}
--	i2c_pxa_scream_blue_murder(i2c, "exhausted retries");
--	ret = -EREMOTEIO;
-- out:
--	i2c_pxa_set_slave(i2c, ret);
--	return ret;
--}
--
- /*
-  * i2c_pxa_master_complete - complete the message and wake up.
-  */
-@@ -1093,6 +930,71 @@ static irqreturn_t i2c_pxa_handler(int t
- 	return IRQ_HANDLED;
- }
- 
-+/*
-+ * We are protected by the adapter bus mutex.
-+ */
-+static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
-+{
-+	long timeout;
-+	int ret;
-+
-+	/*
-+	 * Wait for the bus to become free.
-+	 */
-+	ret = i2c_pxa_wait_bus_not_busy(i2c);
-+	if (ret) {
-+		dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n");
-+		goto out;
-+	}
-+
-+	/*
-+	 * Set master mode.
-+	 */
-+	ret = i2c_pxa_set_master(i2c);
-+	if (ret) {
-+		dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret);
-+		goto out;
-+	}
-+
-+	if (i2c->high_mode) {
-+		ret = i2c_pxa_send_mastercode(i2c);
-+		if (ret) {
-+			dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n");
-+			goto out;
-+			}
-+	}
-+
-+	spin_lock_irq(&i2c->lock);
-+
-+	i2c->msg = msg;
-+	i2c->msg_num = num;
-+	i2c->msg_idx = 0;
-+	i2c->msg_ptr = 0;
-+	i2c->irqlogidx = 0;
-+
-+	i2c_pxa_start_message(i2c);
-+
-+	spin_unlock_irq(&i2c->lock);
-+
-+	/*
-+	 * The rest of the processing occurs in the interrupt handler.
-+	 */
-+	timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
-+	i2c_pxa_stop_message(i2c);
-+
-+	/*
-+	 * We place the return code in i2c->msg_idx.
-+	 */
-+	ret = i2c->msg_idx;
-+
-+	if (!timeout && i2c->msg_num) {
-+		i2c_pxa_scream_blue_murder(i2c, "timeout");
-+		ret = I2C_RETRY;
-+	}
-+
-+ out:
-+	return ret;
-+}
- 
- static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
- {
-@@ -1126,6 +1028,103 @@ static const struct i2c_algorithm i2c_px
- 	.functionality	= i2c_pxa_functionality,
- };
- 
-+/* Non-interrupt mode support */
-+static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c)
-+{
-+	/* make timeout the same as for interrupt based functions */
-+	long timeout = 2 * DEF_TIMEOUT;
-+
-+	/*
-+	 * Wait for the bus to become free.
-+	 */
-+	while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) {
-+		udelay(1000);
-+		show_state(i2c);
-+	}
-+
-+	if (timeout < 0) {
-+		show_state(i2c);
-+		dev_err(&i2c->adap.dev,
-+			"i2c_pxa: timeout waiting for bus free\n");
-+		return I2C_RETRY;
-+	}
-+
-+	/*
-+	 * Set master mode.
-+	 */
-+	writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c));
-+
-+	return 0;
-+}
-+
-+static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c,
-+			       struct i2c_msg *msg, int num)
-+{
-+	unsigned long timeout = 500000; /* 5 seconds */
-+	int ret = 0;
-+
-+	ret = i2c_pxa_pio_set_master(i2c);
-+	if (ret)
-+		goto out;
-+
-+	i2c->msg = msg;
-+	i2c->msg_num = num;
-+	i2c->msg_idx = 0;
-+	i2c->msg_ptr = 0;
-+	i2c->irqlogidx = 0;
-+
-+	i2c_pxa_start_message(i2c);
-+
-+	while (i2c->msg_num > 0 && --timeout) {
-+		i2c_pxa_handler(0, i2c);
-+		udelay(10);
-+	}
-+
-+	i2c_pxa_stop_message(i2c);
-+
-+	/*
-+	 * We place the return code in i2c->msg_idx.
-+	 */
-+	ret = i2c->msg_idx;
-+
-+out:
-+	if (timeout == 0) {
-+		i2c_pxa_scream_blue_murder(i2c, "timeout");
-+		ret = I2C_RETRY;
-+	}
-+
-+	return ret;
-+}
-+
-+static int i2c_pxa_pio_xfer(struct i2c_adapter *adap,
-+			    struct i2c_msg msgs[], int num)
-+{
-+	struct pxa_i2c *i2c = adap->algo_data;
-+	int ret, i;
-+
-+	/* If the I2C controller is disabled we need to reset it
-+	  (probably due to a suspend/resume destroying state). We do
-+	  this here as we can then avoid worrying about resuming the
-+	  controller before its users. */
-+	if (!(readl(_ICR(i2c)) & ICR_IUE))
-+		i2c_pxa_reset(i2c);
-+
-+	for (i = adap->retries; i >= 0; i--) {
-+		ret = i2c_pxa_do_pio_xfer(i2c, msgs, num);
-+		if (ret != I2C_RETRY)
-+			goto out;
-+
-+		if (i2c_debug)
-+			dev_dbg(&adap->dev, "Retrying transmission\n");
-+		udelay(100);
-+	}
-+	i2c_pxa_scream_blue_murder(i2c, "exhausted retries");
-+	ret = -EREMOTEIO;
-+ out:
-+	i2c_pxa_set_slave(i2c, ret);
-+	return ret;
-+}
-+
- static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
- 	.master_xfer	= i2c_pxa_pio_xfer,
- 	.functionality	= i2c_pxa_functionality,
diff --git a/target/linux/generic/backport-5.4/807-v5.8-i2c-pxa-re-arrange-register-field-definitions.patch b/target/linux/generic/backport-5.4/807-v5.8-i2c-pxa-re-arrange-register-field-definitions.patch
deleted file mode 100644
index afade04877..0000000000
--- a/target/linux/generic/backport-5.4/807-v5.8-i2c-pxa-re-arrange-register-field-definitions.patch
+++ /dev/null
@@ -1,161 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Cc: linux-i2c@vger.kernel.org
-Subject: [PATCH 05/17] i2c: pxa: re-arrange register field definitions
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Arrange the register field definitions to be grouped together, rather
-than the Armada-3700 definitions being separated from the rest of the
-definitions.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 113 ++++++++++++++++-------------------
- 1 file changed, 53 insertions(+), 60 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -33,6 +33,56 @@
- #include <linux/platform_data/i2c-pxa.h>
- #include <linux/slab.h>
- 
-+/* I2C register field definitions */
-+#define ICR_START	(1 << 0)	   /* start bit */
-+#define ICR_STOP	(1 << 1)	   /* stop bit */
-+#define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
-+#define ICR_TB		(1 << 3)	   /* transfer byte bit */
-+#define ICR_MA		(1 << 4)	   /* master abort */
-+#define ICR_SCLE	(1 << 5)	   /* master clock enable */
-+#define ICR_IUE		(1 << 6)	   /* unit enable */
-+#define ICR_GCD		(1 << 7)	   /* general call disable */
-+#define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
-+#define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
-+#define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
-+#define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
-+#define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
-+#define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
-+#define ICR_UR		(1 << 14)	   /* unit reset */
-+#define ICR_FM		(1 << 15)	   /* fast mode */
-+#define ICR_HS		(1 << 16)	   /* High Speed mode */
-+#define ICR_A3700_FM	(1 << 16)	   /* fast mode for armada-3700 */
-+#define ICR_A3700_HS	(1 << 17)	   /* high speed mode for armada-3700 */
-+#define ICR_GPIOEN	(1 << 19)	   /* enable GPIO mode for SCL in HS */
-+
-+#define ISR_RWM		(1 << 0)	   /* read/write mode */
-+#define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
-+#define ISR_UB		(1 << 2)	   /* unit busy */
-+#define ISR_IBB		(1 << 3)	   /* bus busy */
-+#define ISR_SSD		(1 << 4)	   /* slave stop detected */
-+#define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
-+#define ISR_ITE		(1 << 6)	   /* tx buffer empty */
-+#define ISR_IRF		(1 << 7)	   /* rx buffer full */
-+#define ISR_GCAD	(1 << 8)	   /* general call address detected */
-+#define ISR_SAD		(1 << 9)	   /* slave address detected */
-+#define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
-+
-+#define ILCR_SLV_SHIFT		0
-+#define ILCR_SLV_MASK		(0x1FF << ILCR_SLV_SHIFT)
-+#define ILCR_FLV_SHIFT		9
-+#define ILCR_FLV_MASK		(0x1FF << ILCR_FLV_SHIFT)
-+#define ILCR_HLVL_SHIFT		18
-+#define ILCR_HLVL_MASK		(0x1FF << ILCR_HLVL_SHIFT)
-+#define ILCR_HLVH_SHIFT		27
-+#define ILCR_HLVH_MASK		(0x1F << ILCR_HLVH_SHIFT)
-+
-+#define IWCR_CNT_SHIFT		0
-+#define IWCR_CNT_MASK		(0x1F << IWCR_CNT_SHIFT)
-+#define IWCR_HS_CNT1_SHIFT	5
-+#define IWCR_HS_CNT1_MASK	(0x1F << IWCR_HS_CNT1_SHIFT)
-+#define IWCR_HS_CNT2_SHIFT	10
-+#define IWCR_HS_CNT2_MASK	(0x1F << IWCR_HS_CNT2_SHIFT)
-+
- struct pxa_reg_layout {
- 	u32 ibmr;
- 	u32 idbr;
-@@ -53,12 +103,7 @@ enum pxa_i2c_types {
- 	REGS_A3700,
- };
- 
--#define ICR_BUSMODE_FM	(1 << 16)	   /* shifted fast mode for armada-3700 */
--#define ICR_BUSMODE_HS	(1 << 17)	   /* shifted high speed mode for armada-3700 */
--
--/*
-- * I2C registers definitions
-- */
-+/* I2C register layout definitions */
- static struct pxa_reg_layout pxa_reg_layout[] = {
- 	[REGS_PXA2XX] = {
- 		.ibmr =	0x00,
-@@ -96,8 +141,8 @@ static struct pxa_reg_layout pxa_reg_lay
- 		.icr =	0x08,
- 		.isr =	0x0c,
- 		.isar =	0x10,
--		.fm = ICR_BUSMODE_FM,
--		.hs = ICR_BUSMODE_HS,
-+		.fm = ICR_A3700_FM,
-+		.hs = ICR_A3700_HS,
- 	},
- };
- 
-@@ -111,58 +156,6 @@ static const struct platform_device_id i
- };
- MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
- 
--/*
-- * I2C bit definitions
-- */
--
--#define ICR_START	(1 << 0)	   /* start bit */
--#define ICR_STOP	(1 << 1)	   /* stop bit */
--#define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
--#define ICR_TB		(1 << 3)	   /* transfer byte bit */
--#define ICR_MA		(1 << 4)	   /* master abort */
--#define ICR_SCLE	(1 << 5)	   /* master clock enable */
--#define ICR_IUE		(1 << 6)	   /* unit enable */
--#define ICR_GCD		(1 << 7)	   /* general call disable */
--#define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
--#define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
--#define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
--#define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
--#define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
--#define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
--#define ICR_UR		(1 << 14)	   /* unit reset */
--#define ICR_FM		(1 << 15)	   /* fast mode */
--#define ICR_HS		(1 << 16)	   /* High Speed mode */
--#define ICR_GPIOEN	(1 << 19)	   /* enable GPIO mode for SCL in HS */
--
--#define ISR_RWM		(1 << 0)	   /* read/write mode */
--#define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
--#define ISR_UB		(1 << 2)	   /* unit busy */
--#define ISR_IBB		(1 << 3)	   /* bus busy */
--#define ISR_SSD		(1 << 4)	   /* slave stop detected */
--#define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
--#define ISR_ITE		(1 << 6)	   /* tx buffer empty */
--#define ISR_IRF		(1 << 7)	   /* rx buffer full */
--#define ISR_GCAD	(1 << 8)	   /* general call address detected */
--#define ISR_SAD		(1 << 9)	   /* slave address detected */
--#define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
--
--/* bit field shift & mask */
--#define ILCR_SLV_SHIFT		0
--#define ILCR_SLV_MASK		(0x1FF << ILCR_SLV_SHIFT)
--#define ILCR_FLV_SHIFT		9
--#define ILCR_FLV_MASK		(0x1FF << ILCR_FLV_SHIFT)
--#define ILCR_HLVL_SHIFT		18
--#define ILCR_HLVL_MASK		(0x1FF << ILCR_HLVL_SHIFT)
--#define ILCR_HLVH_SHIFT		27
--#define ILCR_HLVH_MASK		(0x1F << ILCR_HLVH_SHIFT)
--
--#define IWCR_CNT_SHIFT		0
--#define IWCR_CNT_MASK		(0x1F << IWCR_CNT_SHIFT)
--#define IWCR_HS_CNT1_SHIFT	5
--#define IWCR_HS_CNT1_MASK	(0x1F << IWCR_HS_CNT1_SHIFT)
--#define IWCR_HS_CNT2_SHIFT	10
--#define IWCR_HS_CNT2_MASK	(0x1F << IWCR_HS_CNT2_SHIFT)
--
- struct pxa_i2c {
- 	spinlock_t		lock;
- 	wait_queue_head_t	wait;
diff --git a/target/linux/generic/backport-5.4/808-v5.8-i2c-pxa-add-and-use-definitions-for-IBMR-register.patch b/target/linux/generic/backport-5.4/808-v5.8-i2c-pxa-add-and-use-definitions-for-IBMR-register.patch
deleted file mode 100644
index f197808d23..0000000000
--- a/target/linux/generic/backport-5.4/808-v5.8-i2c-pxa-add-and-use-definitions-for-IBMR-register.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Cc: linux-i2c@vger.kernel.org
-Subject: [PATCH 06/17] i2c: pxa: add and use definitions for IBMR register
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Add definitions for the bits in the IBMR register, and use them in the
-code. This improves readability.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 12 ++++++++----
- 1 file changed, 8 insertions(+), 4 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -34,6 +34,9 @@
- #include <linux/slab.h>
- 
- /* I2C register field definitions */
-+#define IBMR_SDAS	(1 << 0)
-+#define IBMR_SCLS	(1 << 1)
-+
- #define ICR_START	(1 << 0)	   /* start bit */
- #define ICR_STOP	(1 << 1)	   /* stop bit */
- #define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
-@@ -334,7 +337,7 @@ static void i2c_pxa_abort(struct pxa_i2c
- 		return;
- 	}
- 
--	while ((i > 0) && (readl(_IBMR(i2c)) & 0x1) == 0) {
-+	while ((i > 0) && (readl(_IBMR(i2c)) & IBMR_SDAS) == 0) {
- 		unsigned long icr = readl(_ICR(i2c));
- 
- 		icr &= ~ICR_START;
-@@ -389,7 +392,8 @@ static int i2c_pxa_wait_master(struct px
- 		 * quick check of the i2c lines themselves to ensure they've
- 		 * gone high...
- 		 */
--		if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 && readl(_IBMR(i2c)) == 3) {
-+		if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 &&
-+		    readl(_IBMR(i2c)) == (IBMR_SCLS | IBMR_SDAS)) {
- 			if (i2c_debug > 0)
- 				dev_dbg(&i2c->adap.dev, "%s: done\n", __func__);
- 			return 1;
-@@ -574,7 +578,7 @@ static void i2c_pxa_slave_start(struct p
- 	timeout = 0x10000;
- 
- 	while (1) {
--		if ((readl(_IBMR(i2c)) & 2) == 2)
-+		if ((readl(_IBMR(i2c)) & IBMR_SCLS) == IBMR_SCLS)
- 			break;
- 
- 		timeout--;
-@@ -637,7 +641,7 @@ static void i2c_pxa_slave_start(struct p
- 	timeout = 0x10000;
- 
- 	while (1) {
--		if ((readl(_IBMR(i2c)) & 2) == 2)
-+		if ((readl(_IBMR(i2c)) & IBMR_SCLS) == IBMR_SCLS)
- 			break;
- 
- 		timeout--;
diff --git a/target/linux/generic/backport-5.4/809-v5.8-i2c-pxa-always-set-fm-and-hs-members-for-each-type.patch b/target/linux/generic/backport-5.4/809-v5.8-i2c-pxa-always-set-fm-and-hs-members-for-each-type.patch
deleted file mode 100644
index 9b1dee62ce..0000000000
--- a/target/linux/generic/backport-5.4/809-v5.8-i2c-pxa-always-set-fm-and-hs-members-for-each-type.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Cc: linux-i2c@vger.kernel.org
-Subject: [PATCH 07/17] i2c: pxa: always set fm and hs members for each type
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Always set the fm and hs members of struct pxa_reg_layout. These
-members are already taking space, we don't need code as well.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 12 ++++++++++--
- 1 file changed, 10 insertions(+), 2 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -114,6 +114,8 @@ static struct pxa_reg_layout pxa_reg_lay
- 		.icr =	0x10,
- 		.isr =	0x18,
- 		.isar =	0x20,
-+		.fm = ICR_FM,
-+		.hs = ICR_HS,
- 	},
- 	[REGS_PXA3XX] = {
- 		.ibmr =	0x00,
-@@ -121,6 +123,8 @@ static struct pxa_reg_layout pxa_reg_lay
- 		.icr =	0x08,
- 		.isr =	0x0c,
- 		.isar =	0x10,
-+		.fm = ICR_FM,
-+		.hs = ICR_HS,
- 	},
- 	[REGS_CE4100] = {
- 		.ibmr =	0x14,
-@@ -128,6 +132,8 @@ static struct pxa_reg_layout pxa_reg_lay
- 		.icr =	0x00,
- 		.isr =	0x04,
- 		/* no isar register */
-+		.fm = ICR_FM,
-+		.hs = ICR_HS,
- 	},
- 	[REGS_PXA910] = {
- 		.ibmr = 0x00,
-@@ -137,6 +143,8 @@ static struct pxa_reg_layout pxa_reg_lay
- 		.isar = 0x20,
- 		.ilcr = 0x28,
- 		.iwcr = 0x30,
-+		.fm = ICR_FM,
-+		.hs = ICR_HS,
- 	},
- 	[REGS_A3700] = {
- 		.ibmr =	0x00,
-@@ -1229,8 +1237,8 @@ static int i2c_pxa_probe(struct platform
- 	i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr;
- 	i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr;
- 	i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr;
--	i2c->fm_mask = pxa_reg_layout[i2c_type].fm ? : ICR_FM;
--	i2c->hs_mask = pxa_reg_layout[i2c_type].hs ? : ICR_HS;
-+	i2c->fm_mask = pxa_reg_layout[i2c_type].fm;
-+	i2c->hs_mask = pxa_reg_layout[i2c_type].hs;
- 
- 	if (i2c_type != REGS_CE4100)
- 		i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar;
diff --git a/target/linux/generic/backport-5.4/810-v5.8-i2c-pxa-move-private-definitions-to-i2c-pxa.c.patch b/target/linux/generic/backport-5.4/810-v5.8-i2c-pxa-move-private-definitions-to-i2c-pxa.c.patch
deleted file mode 100644
index dda463052f..0000000000
--- a/target/linux/generic/backport-5.4/810-v5.8-i2c-pxa-move-private-definitions-to-i2c-pxa.c.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Cc: linux-i2c@vger.kernel.org
-Subject: [PATCH 08/17] i2c: pxa: move private definitions to i2c-pxa.c
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Move driver-private definitions out of the i2c-pxa.h platform data
-header file into the driver itself. Nothing outside of the driver
-makes use of these constants.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c          | 43 ++++++++++++++++++++++++
- include/linux/platform_data/i2c-pxa.h | 48 ---------------------------
- 2 files changed, 43 insertions(+), 48 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -86,6 +86,49 @@
- #define IWCR_HS_CNT2_SHIFT	10
- #define IWCR_HS_CNT2_MASK	(0x1F << IWCR_HS_CNT2_SHIFT)
- 
-+/* need a longer timeout if we're dealing with the fact we may well be
-+ * looking at a multi-master environment
-+ */
-+#define DEF_TIMEOUT             32
-+
-+#define BUS_ERROR               (-EREMOTEIO)
-+#define XFER_NAKED              (-ECONNREFUSED)
-+#define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
-+
-+/* ICR initialize bit values
-+ *
-+ * 15 FM     0 (100 kHz operation)
-+ * 14 UR     0 (No unit reset)
-+ * 13 SADIE  0 (Disables the unit from interrupting on slave addresses
-+ *              matching its slave address)
-+ * 12 ALDIE  0 (Disables the unit from interrupt when it loses arbitration
-+ *              in master mode)
-+ * 11 SSDIE  0 (Disables interrupts from a slave stop detected, in slave mode)
-+ * 10 BEIE   1 (Enable interrupts from detected bus errors, no ACK sent)
-+ *  9 IRFIE  1 (Enable interrupts from full buffer received)
-+ *  8 ITEIE  1 (Enables the I2C unit to interrupt when transmit buffer empty)
-+ *  7 GCD    1 (Disables i2c unit response to general call messages as a slave)
-+ *  6 IUE    0 (Disable unit until we change settings)
-+ *  5 SCLE   1 (Enables the i2c clock output for master mode (drives SCL)
-+ *  4 MA     0 (Only send stop with the ICR stop bit)
-+ *  3 TB     0 (We are not transmitting a byte initially)
-+ *  2 ACKNAK 0 (Send an ACK after the unit receives a byte)
-+ *  1 STOP   0 (Do not send a STOP)
-+ *  0 START  0 (Do not send a START)
-+ */
-+#define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
-+
-+/* I2C status register init values
-+ *
-+ * 10 BED    1 (Clear bus error detected)
-+ *  9 SAD    1 (Clear slave address detected)
-+ *  7 IRF    1 (Clear IDBR Receive Full)
-+ *  6 ITE    1 (Clear IDBR Transmit Empty)
-+ *  5 ALD    1 (Clear Arbitration Loss Detected)
-+ *  4 SSD    1 (Clear Slave Stop Detected)
-+ */
-+#define I2C_ISR_INIT	0x7FF  /* status register init */
-+
- struct pxa_reg_layout {
- 	u32 ibmr;
- 	u32 idbr;
---- a/include/linux/platform_data/i2c-pxa.h
-+++ b/include/linux/platform_data/i2c-pxa.h
-@@ -7,54 +7,6 @@
- #ifndef _I2C_PXA_H_
- #define _I2C_PXA_H_
- 
--#if 0
--#define DEF_TIMEOUT             3
--#else
--/* need a longer timeout if we're dealing with the fact we may well be
-- * looking at a multi-master environment
--*/
--#define DEF_TIMEOUT             32
--#endif
--
--#define BUS_ERROR               (-EREMOTEIO)
--#define XFER_NAKED              (-ECONNREFUSED)
--#define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
--
--/* ICR initialize bit values
--*
--*  15. FM       0 (100 Khz operation)
--*  14. UR       0 (No unit reset)
--*  13. SADIE    0 (Disables the unit from interrupting on slave addresses
--*                                       matching its slave address)
--*  12. ALDIE    0 (Disables the unit from interrupt when it loses arbitration
--*                                       in master mode)
--*  11. SSDIE    0 (Disables interrupts from a slave stop detected, in slave mode)
--*  10. BEIE     1 (Enable interrupts from detected bus errors, no ACK sent)
--*  9.  IRFIE    1 (Enable interrupts from full buffer received)
--*  8.  ITEIE    1 (Enables the I2C unit to interrupt when transmit buffer empty)
--*  7.  GCD      1 (Disables i2c unit response to general call messages as a slave)
--*  6.  IUE      0 (Disable unit until we change settings)
--*  5.  SCLE     1 (Enables the i2c clock output for master mode (drives SCL)
--*  4.  MA       0 (Only send stop with the ICR stop bit)
--*  3.  TB       0 (We are not transmitting a byte initially)
--*  2.  ACKNAK   0 (Send an ACK after the unit receives a byte)
--*  1.  STOP     0 (Do not send a STOP)
--*  0.  START    0 (Do not send a START)
--*
--*/
--#define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
--
--/* I2C status register init values
-- *
-- * 10. BED      1 (Clear bus error detected)
-- * 9.  SAD      1 (Clear slave address detected)
-- * 7.  IRF      1 (Clear IDBR Receive Full)
-- * 6.  ITE      1 (Clear IDBR Transmit Empty)
-- * 5.  ALD      1 (Clear Arbitration Loss Detected)
-- * 4.  SSD      1 (Clear Slave Stop Detected)
-- */
--#define I2C_ISR_INIT	0x7FF  /* status register init */
--
- struct i2c_slave_client;
- 
- struct i2c_pxa_platform_data {
diff --git a/target/linux/generic/backport-5.4/811-v5.8-i2c-pxa-move-DT-IDs-along-side-platform-IDs.patch b/target/linux/generic/backport-5.4/811-v5.8-i2c-pxa-move-DT-IDs-along-side-platform-IDs.patch
deleted file mode 100644
index 02565229d8..0000000000
--- a/target/linux/generic/backport-5.4/811-v5.8-i2c-pxa-move-DT-IDs-along-side-platform-IDs.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Cc: linux-i2c@vger.kernel.org
-Subject: [PATCH 09/17] i2c: pxa: move DT IDs along side platform IDs
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Move the ID tables into one place, near the device dependent data.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 18 +++++++++---------
- 1 file changed, 9 insertions(+), 9 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -200,6 +200,15 @@ static struct pxa_reg_layout pxa_reg_lay
- 	},
- };
- 
-+static const struct of_device_id i2c_pxa_dt_ids[] = {
-+	{ .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX },
-+	{ .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX },
-+	{ .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 },
-+	{ .compatible = "marvell,armada-3700-i2c", .data = (void *)REGS_A3700 },
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
-+
- static const struct platform_device_id i2c_pxa_id_table[] = {
- 	{ "pxa2xx-i2c",		REGS_PXA2XX },
- 	{ "pxa3xx-pwri2c",	REGS_PXA3XX },
-@@ -1178,15 +1187,6 @@ static const struct i2c_algorithm i2c_px
- 	.functionality	= i2c_pxa_functionality,
- };
- 
--static const struct of_device_id i2c_pxa_dt_ids[] = {
--	{ .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX },
--	{ .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX },
--	{ .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 },
--	{ .compatible = "marvell,armada-3700-i2c", .data = (void *)REGS_A3700 },
--	{}
--};
--MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
--
- static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
- 			    enum pxa_i2c_types *i2c_types)
- {
diff --git a/target/linux/generic/backport-5.4/813-v5.8-i2c-pxa-clean-up-decode_bits.patch b/target/linux/generic/backport-5.4/813-v5.8-i2c-pxa-clean-up-decode_bits.patch
deleted file mode 100644
index adcf969ef6..0000000000
--- a/target/linux/generic/backport-5.4/813-v5.8-i2c-pxa-clean-up-decode_bits.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Cc: linux-i2c@vger.kernel.org
-Subject: [PATCH 11/17] i2c: pxa: clean up decode_bits()
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Clean up decode_bits() to use pr_cont(), and move the newline into the
-function rather than at its two callsites. Avoid printing an
-unnecessary space before the newline.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -287,13 +287,14 @@ struct bits {
- static inline void
- decode_bits(const char *prefix, const struct bits *bits, int num, u32 val)
- {
--	printk("%s %08x: ", prefix, val);
-+	printk("%s %08x:", prefix, val);
- 	while (num--) {
- 		const char *str = val & bits->mask ? bits->set : bits->unset;
- 		if (str)
--			printk("%s ", str);
-+			pr_cont(" %s", str);
- 		bits++;
- 	}
-+	pr_cont("\n");
- }
- 
- static const struct bits isr_bits[] = {
-@@ -313,7 +314,6 @@ static const struct bits isr_bits[] = {
- static void decode_ISR(unsigned int val)
- {
- 	decode_bits(KERN_DEBUG "ISR", isr_bits, ARRAY_SIZE(isr_bits), val);
--	printk("\n");
- }
- 
- static const struct bits icr_bits[] = {
-@@ -338,7 +338,6 @@ static const struct bits icr_bits[] = {
- static void decode_ICR(unsigned int val)
- {
- 	decode_bits(KERN_DEBUG "ICR", icr_bits, ARRAY_SIZE(icr_bits), val);
--	printk("\n");
- }
- #endif
- 
diff --git a/target/linux/generic/backport-5.4/814-v5.8-i2c-pxa-fix-i2c_pxa_wait_bus_not_busy-boundary-condi.patch b/target/linux/generic/backport-5.4/814-v5.8-i2c-pxa-fix-i2c_pxa_wait_bus_not_busy-boundary-condi.patch
deleted file mode 100644
index 2aadecc357..0000000000
--- a/target/linux/generic/backport-5.4/814-v5.8-i2c-pxa-fix-i2c_pxa_wait_bus_not_busy-boundary-condi.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Cc: linux-i2c@vger.kernel.org
-Subject: [PATCH 12/17] i2c: pxa: fix i2c_pxa_wait_bus_not_busy() boundary
- condition
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Fix i2c_pxa_wait_bus_not_busy()'s boundary conditions, so that a
-coincidental success and timeout results in the function returning
-success.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 17 ++++++++++++-----
- 1 file changed, 12 insertions(+), 5 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -417,19 +417,26 @@ static void i2c_pxa_abort(struct pxa_i2c
- static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c)
- {
- 	int timeout = DEF_TIMEOUT;
-+	u32 isr;
- 
--	while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) {
--		if ((readl(_ISR(i2c)) & ISR_SAD) != 0)
-+	while (1) {
-+		isr = readl(_ISR(i2c));
-+		if (!(isr & (ISR_IBB | ISR_UB)))
-+			return 0;
-+
-+		if (isr & ISR_SAD)
- 			timeout += 4;
- 
-+		if (!timeout--)
-+			break;
-+
- 		msleep(2);
- 		show_state(i2c);
- 	}
- 
--	if (timeout < 0)
--		show_state(i2c);
-+	show_state(i2c);
- 
--	return timeout < 0 ? I2C_RETRY : 0;
-+	return I2C_RETRY;
- }
- 
- static int i2c_pxa_wait_master(struct pxa_i2c *i2c)
diff --git a/target/linux/generic/backport-5.4/815-v5.8-i2c-pxa-consolidate-i2c_pxa_-xfer-implementations.patch b/target/linux/generic/backport-5.4/815-v5.8-i2c-pxa-consolidate-i2c_pxa_-xfer-implementations.patch
deleted file mode 100644
index 2debd4c86b..0000000000
--- a/target/linux/generic/backport-5.4/815-v5.8-i2c-pxa-consolidate-i2c_pxa_-xfer-implementations.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Subject: [PATCH 1/7] i2c: pxa: consolidate i2c_pxa_*xfer() implementations
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Most of i2c_pxa_pio_xfer() and i2c_pxa_xfer() are identical; the only
-differences are that i2c_pxa_pio_xfer() may reset the bus, and they
-use different underlying transfer functions. The retry loop is the
-same. Consolidate these two functions.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 36 ++++++++++++++++--------------------
- 1 file changed, 16 insertions(+), 20 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -1059,18 +1059,20 @@ static int i2c_pxa_do_xfer(struct pxa_i2
- 	return ret;
- }
- 
--static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
-+static int i2c_pxa_internal_xfer(struct pxa_i2c *i2c,
-+				 struct i2c_msg *msgs, int num,
-+				 int (*xfer)(struct pxa_i2c *,
-+					     struct i2c_msg *, int num))
- {
--	struct pxa_i2c *i2c = adap->algo_data;
- 	int ret, i;
- 
--	for (i = adap->retries; i >= 0; i--) {
--		ret = i2c_pxa_do_xfer(i2c, msgs, num);
-+	for (i = i2c->adap.retries; i >= 0; i--) {
-+		ret = xfer(i2c, msgs, num);
- 		if (ret != I2C_RETRY)
- 			goto out;
- 
- 		if (i2c_debug)
--			dev_dbg(&adap->dev, "Retrying transmission\n");
-+			dev_dbg(&i2c->adap.dev, "Retrying transmission\n");
- 		udelay(100);
- 	}
- 	i2c_pxa_scream_blue_murder(i2c, "exhausted retries");
-@@ -1080,6 +1082,14 @@ static int i2c_pxa_xfer(struct i2c_adapt
- 	return ret;
- }
- 
-+static int i2c_pxa_xfer(struct i2c_adapter *adap,
-+			struct i2c_msg msgs[], int num)
-+{
-+	struct pxa_i2c *i2c = adap->algo_data;
-+
-+	return i2c_pxa_internal_xfer(i2c, msgs, num, i2c_pxa_do_xfer);
-+}
-+
- static u32 i2c_pxa_functionality(struct i2c_adapter *adap)
- {
- 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
-@@ -1163,7 +1173,6 @@ static int i2c_pxa_pio_xfer(struct i2c_a
- 			    struct i2c_msg msgs[], int num)
- {
- 	struct pxa_i2c *i2c = adap->algo_data;
--	int ret, i;
- 
- 	/* If the I2C controller is disabled we need to reset it
- 	  (probably due to a suspend/resume destroying state). We do
-@@ -1172,20 +1181,7 @@ static int i2c_pxa_pio_xfer(struct i2c_a
- 	if (!(readl(_ICR(i2c)) & ICR_IUE))
- 		i2c_pxa_reset(i2c);
- 
--	for (i = adap->retries; i >= 0; i--) {
--		ret = i2c_pxa_do_pio_xfer(i2c, msgs, num);
--		if (ret != I2C_RETRY)
--			goto out;
--
--		if (i2c_debug)
--			dev_dbg(&adap->dev, "Retrying transmission\n");
--		udelay(100);
--	}
--	i2c_pxa_scream_blue_murder(i2c, "exhausted retries");
--	ret = -EREMOTEIO;
-- out:
--	i2c_pxa_set_slave(i2c, ret);
--	return ret;
-+	return i2c_pxa_internal_xfer(i2c, msgs, num, i2c_pxa_do_pio_xfer);
- }
- 
- static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
diff --git a/target/linux/generic/backport-5.4/816-v5.8-i2c-pxa-avoid-complaints-with-non-responsive-slaves.patch b/target/linux/generic/backport-5.4/816-v5.8-i2c-pxa-avoid-complaints-with-non-responsive-slaves.patch
deleted file mode 100644
index 63e6db80ad..0000000000
--- a/target/linux/generic/backport-5.4/816-v5.8-i2c-pxa-avoid-complaints-with-non-responsive-slaves.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Subject: [PATCH 2/7] i2c: pxa: avoid complaints with non-responsive slaves
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Running i2cdetect on a PXA I2C adapter is very noisy; it complains
-whenever a slave fails to respond to the address cycle.  Since it is
-normal to probe for slaves in this way, we should not fill the kernel
-log.  This is especially true with SFP modules that take a while to
-respond on the I2C bus, and probing via the I2C bus is the only way to
-detect that they are ready.
-
-Fix this by changing the internal transfer return code from I2C_RETRY
-to a new NO_SLAVE code (mapped to -ENXIO, as per the I2C documentation
-for this condition, but we still return -EREMOTEIO to the I2C stack to
-maintain long established driver behaviour.)
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 12 ++++++++----
- 1 file changed, 8 insertions(+), 4 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -91,6 +91,7 @@
-  */
- #define DEF_TIMEOUT             32
- 
-+#define NO_SLAVE		(-ENXIO)
- #define BUS_ERROR               (-EREMOTEIO)
- #define XFER_NAKED              (-ECONNREFUSED)
- #define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
-@@ -838,7 +839,7 @@ static void i2c_pxa_irq_txempty(struct p
- 		 */
- 		if (isr & ISR_ACKNAK) {
- 			if (i2c->msg_ptr == 0 && i2c->msg_idx == 0)
--				ret = I2C_RETRY;
-+				ret = NO_SLAVE;
- 			else
- 				ret = XFER_NAKED;
- 		}
-@@ -1066,16 +1067,19 @@ static int i2c_pxa_internal_xfer(struct
- {
- 	int ret, i;
- 
--	for (i = i2c->adap.retries; i >= 0; i--) {
-+	for (i = 0; ; ) {
- 		ret = xfer(i2c, msgs, num);
--		if (ret != I2C_RETRY)
-+		if (ret != I2C_RETRY && ret != NO_SLAVE)
- 			goto out;
-+		if (++i >= i2c->adap.retries)
-+			break;
- 
- 		if (i2c_debug)
- 			dev_dbg(&i2c->adap.dev, "Retrying transmission\n");
- 		udelay(100);
- 	}
--	i2c_pxa_scream_blue_murder(i2c, "exhausted retries");
-+	if (ret != NO_SLAVE)
-+		i2c_pxa_scream_blue_murder(i2c, "exhausted retries");
- 	ret = -EREMOTEIO;
-  out:
- 	i2c_pxa_set_slave(i2c, ret);
diff --git a/target/linux/generic/backport-5.4/817-v5.8-i2c-pxa-ensure-timeout-messages-are-unique.patch b/target/linux/generic/backport-5.4/817-v5.8-i2c-pxa-ensure-timeout-messages-are-unique.patch
deleted file mode 100644
index 37a77b6c5c..0000000000
--- a/target/linux/generic/backport-5.4/817-v5.8-i2c-pxa-ensure-timeout-messages-are-unique.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Subject: [PATCH 3/7] i2c: pxa: ensure timeout messages are unique
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Ensure that the various timeout messages can identify where in the code
-they were produced from to aid debugging.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -1052,7 +1052,7 @@ static int i2c_pxa_do_xfer(struct pxa_i2
- 	ret = i2c->msg_idx;
- 
- 	if (!timeout && i2c->msg_num) {
--		i2c_pxa_scream_blue_murder(i2c, "timeout");
-+		i2c_pxa_scream_blue_murder(i2c, "timeout with active message");
- 		ret = I2C_RETRY;
- 	}
- 
-@@ -1122,7 +1122,7 @@ static int i2c_pxa_pio_set_master(struct
- 	if (timeout < 0) {
- 		show_state(i2c);
- 		dev_err(&i2c->adap.dev,
--			"i2c_pxa: timeout waiting for bus free\n");
-+			"i2c_pxa: timeout waiting for bus free (set_master)\n");
- 		return I2C_RETRY;
- 	}
- 
-@@ -1166,7 +1166,7 @@ static int i2c_pxa_do_pio_xfer(struct px
- 
- out:
- 	if (timeout == 0) {
--		i2c_pxa_scream_blue_murder(i2c, "timeout");
-+		i2c_pxa_scream_blue_murder(i2c, "timeout (do_pio_xfer)");
- 		ret = I2C_RETRY;
- 	}
- 
diff --git a/target/linux/generic/backport-5.4/818-v5.8-i2c-pxa-remove-some-unnecessary-debug.patch b/target/linux/generic/backport-5.4/818-v5.8-i2c-pxa-remove-some-unnecessary-debug.patch
deleted file mode 100644
index 5438588ded..0000000000
--- a/target/linux/generic/backport-5.4/818-v5.8-i2c-pxa-remove-some-unnecessary-debug.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Subject: [PATCH 4/7] i2c: pxa: remove some unnecessary debug
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Remove unnecessary show_state() in the loop inside
-i2c_pxa_pio_set_master(), which can be unnecessarily verbose.
-
-Remove the i2c_pxa_scream_blue_murder() in i2c_pxa_pio_xfer(), which
-will trigger if we are probing the I2C bus and a slave does not
-respond; this is a normal event, and not something to report.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -1114,10 +1114,8 @@ static int i2c_pxa_pio_set_master(struct
- 	/*
- 	 * Wait for the bus to become free.
- 	 */
--	while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) {
-+	while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB))
- 		udelay(1000);
--		show_state(i2c);
--	}
- 
- 	if (timeout < 0) {
- 		show_state(i2c);
diff --git a/target/linux/generic/backport-5.4/820-v5.8-i2c-pxa-use-master-abort-for-device-probes.patch b/target/linux/generic/backport-5.4/820-v5.8-i2c-pxa-use-master-abort-for-device-probes.patch
deleted file mode 100644
index cde9e3fe33..0000000000
--- a/target/linux/generic/backport-5.4/820-v5.8-i2c-pxa-use-master-abort-for-device-probes.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Subject: [PATCH 6/7] i2c: pxa: use master-abort for device probes
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Use master-abort to send the stop condition after an address cycle
-rather than resetting the controller.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 10 ++--------
- 1 file changed, 2 insertions(+), 8 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -899,14 +899,8 @@ static void i2c_pxa_irq_txempty(struct p
- 		icr &= ~ICR_ALDIE;
- 		icr |= ICR_START | ICR_TB;
- 	} else {
--		if (i2c->msg->len == 0) {
--			/*
--			 * Device probes have a message length of zero
--			 * and need the bus to be reset before it can
--			 * be used again.
--			 */
--			i2c_pxa_reset(i2c);
--		}
-+		if (i2c->msg->len == 0)
-+			icr |= ICR_MA;
- 		i2c_pxa_master_complete(i2c, 0);
- 	}
- 
diff --git a/target/linux/generic/backport-5.4/821-v5.8-i2c-pxa-implement-generic-i2c-bus-recovery.patch b/target/linux/generic/backport-5.4/821-v5.8-i2c-pxa-implement-generic-i2c-bus-recovery.patch
deleted file mode 100644
index 592b763b6a..0000000000
--- a/target/linux/generic/backport-5.4/821-v5.8-i2c-pxa-implement-generic-i2c-bus-recovery.patch
+++ /dev/null
@@ -1,285 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Subject: [PATCH 7/7] i2c: pxa: implement generic i2c bus recovery
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Implement generic GPIO-based I2C bus recovery for the PXA I2C driver.
-
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c | 176 +++++++++++++++++++++++++++++++----
- 1 file changed, 159 insertions(+), 17 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -20,6 +20,7 @@
- #include <linux/delay.h>
- #include <linux/err.h>
- #include <linux/errno.h>
-+#include <linux/gpio/consumer.h>
- #include <linux/i2c.h>
- #include <linux/i2c-pxa.h>
- #include <linux/init.h>
-@@ -29,6 +30,7 @@
- #include <linux/module.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-+#include <linux/pinctrl/consumer.h>
- #include <linux/platform_device.h>
- #include <linux/platform_data/i2c-pxa.h>
- #include <linux/slab.h>
-@@ -261,6 +263,11 @@ struct pxa_i2c {
- 	bool			highmode_enter;
- 	u32			fm_mask;
- 	u32			hs_mask;
-+
-+	struct i2c_bus_recovery_info recovery;
-+	struct pinctrl		*pinctrl;
-+	struct pinctrl_state	*pinctrl_default;
-+	struct pinctrl_state	*pinctrl_recovery;
- };
- 
- #define _IBMR(i2c)	((i2c)->reg_ibmr)
-@@ -560,13 +567,8 @@ static void i2c_pxa_set_slave(struct pxa
- #define i2c_pxa_set_slave(i2c, err)	do { } while (0)
- #endif
- 
--static void i2c_pxa_reset(struct pxa_i2c *i2c)
-+static void i2c_pxa_do_reset(struct pxa_i2c *i2c)
- {
--	pr_debug("Resetting I2C Controller Unit\n");
--
--	/* abort any transfer currently under way */
--	i2c_pxa_abort(i2c);
--
- 	/* reset according to 9.8 */
- 	writel(ICR_UR, _ICR(i2c));
- 	writel(I2C_ISR_INIT, _ISR(i2c));
-@@ -585,12 +587,25 @@ static void i2c_pxa_reset(struct pxa_i2c
- #endif
- 
- 	i2c_pxa_set_slave(i2c, 0);
-+}
- 
-+static void i2c_pxa_enable(struct pxa_i2c *i2c)
-+{
- 	/* enable unit */
- 	writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c));
- 	udelay(100);
- }
- 
-+static void i2c_pxa_reset(struct pxa_i2c *i2c)
-+{
-+	pr_debug("Resetting I2C Controller Unit\n");
-+
-+	/* abort any transfer currently under way */
-+	i2c_pxa_abort(i2c);
-+	i2c_pxa_do_reset(i2c);
-+	i2c_pxa_enable(i2c);
-+}
-+
- 
- #ifdef CONFIG_I2C_PXA_SLAVE
- /*
-@@ -1002,6 +1017,7 @@ static int i2c_pxa_do_xfer(struct pxa_i2
- 	ret = i2c_pxa_wait_bus_not_busy(i2c);
- 	if (ret) {
- 		dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n");
-+		i2c_recover_bus(&i2c->adap);
- 		goto out;
- 	}
- 
-@@ -1047,6 +1063,7 @@ static int i2c_pxa_do_xfer(struct pxa_i2
- 
- 	if (!timeout && i2c->msg_num) {
- 		i2c_pxa_scream_blue_murder(i2c, "timeout with active message");
-+		i2c_recover_bus(&i2c->adap);
- 		ret = I2C_RETRY;
- 	}
- 
-@@ -1228,6 +1245,129 @@ static int i2c_pxa_probe_pdata(struct pl
- 	return 0;
- }
- 
-+static void i2c_pxa_prepare_recovery(struct i2c_adapter *adap)
-+{
-+	struct pxa_i2c *i2c = adap->algo_data;
-+	u32 ibmr = readl(_IBMR(i2c));
-+
-+	/*
-+	 * Program the GPIOs to reflect the current I2C bus state while
-+	 * we transition to recovery; this avoids glitching the bus.
-+	 */
-+	gpiod_set_value(i2c->recovery.scl_gpiod, ibmr & IBMR_SCLS);
-+	gpiod_set_value(i2c->recovery.sda_gpiod, ibmr & IBMR_SDAS);
-+
-+	WARN_ON(pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_recovery));
-+}
-+
-+static void i2c_pxa_unprepare_recovery(struct i2c_adapter *adap)
-+{
-+	struct pxa_i2c *i2c = adap->algo_data;
-+	u32 isr;
-+
-+	/*
-+	 * The bus should now be free. Clear up the I2C controller before
-+	 * handing control of the bus back to avoid the bus changing state.
-+	 */
-+	isr = readl(_ISR(i2c));
-+	if (isr & (ISR_UB | ISR_IBB)) {
-+		dev_dbg(&i2c->adap.dev,
-+			"recovery: resetting controller, ISR=0x%08x\n", isr);
-+		i2c_pxa_do_reset(i2c);
-+	}
-+
-+	WARN_ON(pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_default));
-+
-+	dev_dbg(&i2c->adap.dev, "recovery: IBMR 0x%08x ISR 0x%08x\n",
-+	        readl(_IBMR(i2c)), readl(_ISR(i2c)));
-+
-+	i2c_pxa_enable(i2c);
-+}
-+
-+static int i2c_pxa_init_recovery(struct pxa_i2c *i2c)
-+{
-+	struct i2c_bus_recovery_info *bri = &i2c->recovery;
-+	struct device *dev = i2c->adap.dev.parent;
-+
-+	/*
-+	 * When slave mode is enabled, we are not the only master on the bus.
-+	 * Bus recovery can only be performed when we are the master, which
-+	 * we can't be certain of. Therefore, when slave mode is enabled, do
-+	 * not configure bus recovery.
-+	 */
-+	if (IS_ENABLED(CONFIG_I2C_PXA_SLAVE))
-+		return 0;
-+
-+	i2c->pinctrl = devm_pinctrl_get(dev);
-+	if (IS_ERR(i2c->pinctrl))
-+		return PTR_ERR(i2c->pinctrl);
-+
-+	if (!i2c->pinctrl)
-+		return 0;
-+
-+	i2c->pinctrl_default = pinctrl_lookup_state(i2c->pinctrl,
-+						    PINCTRL_STATE_DEFAULT);
-+	i2c->pinctrl_recovery = pinctrl_lookup_state(i2c->pinctrl, "recovery");
-+
-+	if (IS_ERR(i2c->pinctrl_default) || IS_ERR(i2c->pinctrl_recovery)) {
-+		dev_info(dev, "missing pinmux recovery information: %ld %ld\n",
-+			 PTR_ERR(i2c->pinctrl_default),
-+			 PTR_ERR(i2c->pinctrl_recovery));
-+		return 0;
-+	}
-+
-+	/*
-+	 * Claiming GPIOs can influence the pinmux state, and may glitch the
-+	 * I2C bus. Do this carefully.
-+	 */
-+	bri->scl_gpiod = devm_gpiod_get(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
-+	if (bri->scl_gpiod == ERR_PTR(-EPROBE_DEFER))
-+		return -EPROBE_DEFER;
-+	if (IS_ERR(bri->scl_gpiod)) {
-+		dev_info(dev, "missing scl gpio recovery information: %pe\n",
-+			 bri->scl_gpiod);
-+		return 0;
-+	}
-+
-+	/*
-+	 * We have SCL. Pull SCL low and wait a bit so that SDA glitches
-+	 * have no effect.
-+	 */
-+	gpiod_direction_output(bri->scl_gpiod, 0);
-+	udelay(10);
-+	bri->sda_gpiod = devm_gpiod_get(dev, "sda", GPIOD_OUT_HIGH_OPEN_DRAIN);
-+
-+	/* Wait a bit in case of a SDA glitch, and then release SCL. */
-+	udelay(10);
-+	gpiod_direction_output(bri->scl_gpiod, 1);
-+
-+	if (bri->sda_gpiod == ERR_PTR(-EPROBE_DEFER))
-+		return -EPROBE_DEFER;
-+
-+	if (IS_ERR(bri->sda_gpiod)) {
-+		dev_info(dev, "missing sda gpio recovery information: %pe\n",
-+			 bri->sda_gpiod);
-+		return 0;
-+	}
-+
-+	bri->prepare_recovery = i2c_pxa_prepare_recovery;
-+	bri->unprepare_recovery = i2c_pxa_unprepare_recovery;
-+	bri->recover_bus = i2c_generic_scl_recovery;
-+
-+	i2c->adap.bus_recovery_info = bri;
-+
-+	/*
-+	 * Claiming GPIOs can change the pinmux state, which confuses the
-+	 * pinctrl since pinctrl's idea of the current setting is unaffected
-+	 * by the pinmux change caused by claiming the GPIO. Work around that
-+	 * by switching pinctrl to the GPIO state here. We do it this way to
-+	 * avoid glitching the I2C bus.
-+	 */
-+	pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_recovery);
-+
-+	return pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_default);
-+}
-+
- static int i2c_pxa_probe(struct platform_device *dev)
- {
- 	struct i2c_pxa_platform_data *plat = dev_get_platdata(&dev->dev);
-@@ -1240,6 +1380,16 @@ static int i2c_pxa_probe(struct platform
- 	if (!i2c)
- 		return -ENOMEM;
- 
-+	/* Default adapter num to device id; i2c_pxa_probe_dt can override. */
-+	i2c->adap.nr = dev->id;
-+	i2c->adap.owner   = THIS_MODULE;
-+	i2c->adap.retries = 5;
-+	i2c->adap.algo_data = i2c;
-+	i2c->adap.dev.parent = &dev->dev;
-+#ifdef CONFIG_OF
-+	i2c->adap.dev.of_node = dev->dev.of_node;
-+#endif
-+
- 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
- 	i2c->reg_base = devm_ioremap_resource(&dev->dev, res);
- 	if (IS_ERR(i2c->reg_base))
-@@ -1251,8 +1401,9 @@ static int i2c_pxa_probe(struct platform
- 		return irq;
- 	}
- 
--	/* Default adapter num to device id; i2c_pxa_probe_dt can override. */
--	i2c->adap.nr = dev->id;
-+	ret = i2c_pxa_init_recovery(i2c);
-+	if (ret)
-+		return ret;
- 
- 	ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type);
- 	if (ret > 0)
-@@ -1260,9 +1411,6 @@ static int i2c_pxa_probe(struct platform
- 	if (ret < 0)
- 		return ret;
- 
--	i2c->adap.owner   = THIS_MODULE;
--	i2c->adap.retries = 5;
--
- 	spin_lock_init(&i2c->lock);
- 	init_waitqueue_head(&i2c->wait);
- 
-@@ -1332,12 +1480,6 @@ static int i2c_pxa_probe(struct platform
- 
- 	i2c_pxa_reset(i2c);
- 
--	i2c->adap.algo_data = i2c;
--	i2c->adap.dev.parent = &dev->dev;
--#ifdef CONFIG_OF
--	i2c->adap.dev.of_node = dev->dev.of_node;
--#endif
--
- 	ret = i2c_add_numbered_adapter(&i2c->adap);
- 	if (ret < 0)
- 		goto ereqirq;
diff --git a/target/linux/generic/backport-5.4/825-v5.8-spi-rb4xx-null-pointer-bug-fix.patch b/target/linux/generic/backport-5.4/825-v5.8-spi-rb4xx-null-pointer-bug-fix.patch
deleted file mode 100644
index 71e26d50da..0000000000
--- a/target/linux/generic/backport-5.4/825-v5.8-spi-rb4xx-null-pointer-bug-fix.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From: Christopher Hill <ch6574@gmail.com>
-To: Mark Brown <broonie@kernel.org>
-Cc: Christopher Hill <ch6574@gmail.com>, linux-spi@vger.kernel.org,
-        linux-kernel@vger.kernel.org
-Subject: [PATCH 1/3] spi: rb4xx: null pointer bug fix
-Date: Thu, 21 May 2020 14:36:29 -0400
-Message-Id: <20200521183631.37806-1-ch6574@gmail.com>
-X-Mailer: git-send-email 2.25.1
-MIME-Version: 1.0
-Sender: linux-spi-owner@vger.kernel.org
-Precedence: bulk
-List-ID: <linux-spi.vger.kernel.org>
-X-Mailing-List: linux-spi@vger.kernel.org
-
-This patch fixes a null pointer bug in the spi driver spi-rb4xx.c by
-moving the private data initialization to earlier in probe
-
-Signed-off-by: Christopher Hill <ch6574@gmail.com>
----
- drivers/spi/spi-rb4xx.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/spi/spi-rb4xx.c
-+++ b/drivers/spi/spi-rb4xx.c
-@@ -158,6 +158,11 @@ static int rb4xx_spi_probe(struct platfo
- 	master->transfer_one = rb4xx_transfer_one;
- 	master->set_cs = rb4xx_set_cs;
- 
-+	rbspi = spi_master_get_devdata(master);
-+	rbspi->base = spi_base;
-+	rbspi->clk = ahb_clk;
-+	platform_set_drvdata(pdev, rbspi);
-+
- 	err = devm_spi_register_master(&pdev->dev, master);
- 	if (err) {
- 		dev_err(&pdev->dev, "failed to register SPI master\n");
-@@ -168,11 +173,6 @@ static int rb4xx_spi_probe(struct platfo
- 	if (err)
- 		return err;
- 
--	rbspi = spi_master_get_devdata(master);
--	rbspi->base = spi_base;
--	rbspi->clk = ahb_clk;
--	platform_set_drvdata(pdev, rbspi);
--
- 	/* Enable SPI */
- 	rb4xx_write(rbspi, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
- 
diff --git a/target/linux/generic/backport-5.4/826-v5.8-spi-rb4xx-update-driver-to-be-device-tree-aware.patch b/target/linux/generic/backport-5.4/826-v5.8-spi-rb4xx-update-driver-to-be-device-tree-aware.patch
deleted file mode 100644
index 0ce4f2bb35..0000000000
--- a/target/linux/generic/backport-5.4/826-v5.8-spi-rb4xx-update-driver-to-be-device-tree-aware.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From: Christopher Hill <ch6574@gmail.com>
-To: Mark Brown <broonie@kernel.org>
-Cc: Christopher Hill <ch6574@gmail.com>, linux-spi@vger.kernel.org,
-        linux-kernel@vger.kernel.org
-Subject: [PATCH 2/3] spi: rb4xx: update driver to be device tree aware
-Date: Thu, 21 May 2020 14:36:30 -0400
-Message-Id: <20200521183631.37806-2-ch6574@gmail.com>
-X-Mailer: git-send-email 2.25.1
-In-Reply-To: <20200521183631.37806-1-ch6574@gmail.com>
-References: <20200521183631.37806-1-ch6574@gmail.com>
-MIME-Version: 1.0
-Sender: linux-spi-owner@vger.kernel.org
-Precedence: bulk
-List-ID: <linux-spi.vger.kernel.org>
-X-Mailing-List: linux-spi@vger.kernel.org
-
-This patch updates the spi driver spi-rb4xx.c to be device tree aware
-
-Signed-off-by: Christopher Hill <ch6574@gmail.com>
----
- drivers/spi/spi-rb4xx.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/spi/spi-rb4xx.c
-+++ b/drivers/spi/spi-rb4xx.c
-@@ -14,6 +14,7 @@
- #include <linux/platform_device.h>
- #include <linux/clk.h>
- #include <linux/spi/spi.h>
-+#include <linux/of.h>
- 
- #include <asm/mach-ath79/ar71xx_regs.h>
- 
-@@ -150,6 +151,7 @@ static int rb4xx_spi_probe(struct platfo
- 	if (IS_ERR(ahb_clk))
- 		return PTR_ERR(ahb_clk);
- 
-+	master->dev.of_node = pdev->dev.of_node;
- 	master->bus_num = 0;
- 	master->num_chipselect = 3;
- 	master->mode_bits = SPI_TX_DUAL;
-@@ -188,11 +190,18 @@ static int rb4xx_spi_remove(struct platf
- 	return 0;
- }
- 
-+static const struct of_device_id rb4xx_spi_dt_match[] = {
-+	{ .compatible = "mikrotik,rb4xx-spi" },
-+	{ },
-+};
-+MODULE_DEVICE_TABLE(of, rb4xx_spi_dt_match);
-+
- static struct platform_driver rb4xx_spi_drv = {
- 	.probe = rb4xx_spi_probe,
- 	.remove = rb4xx_spi_remove,
- 	.driver = {
- 		.name = "rb4xx-spi",
-+		.of_match_table = of_match_ptr(rb4xx_spi_dt_match),
- 	},
- };
- 
diff --git a/target/linux/generic/backport-5.4/831-v5.13-0001-firmware-bcm47xx_nvram-rename-finding-function-and-i.patch b/target/linux/generic/backport-5.4/831-v5.13-0001-firmware-bcm47xx_nvram-rename-finding-function-and-i.patch
deleted file mode 100644
index 19938704b7..0000000000
--- a/target/linux/generic/backport-5.4/831-v5.13-0001-firmware-bcm47xx_nvram-rename-finding-function-and-i.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From fb009cbdd0693bd633f11e99526617b3d392cfad Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 8 Mar 2021 10:03:16 +0100
-Subject: [PATCH] firmware: bcm47xx_nvram: rename finding function and its
- variables
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1. Use "bcm47xx_" function name prefix for consistency
-2. It takes flash start as argument so s/iobase/flash_start/
-3. "off" was used for finding flash end so just call it "flash_size"
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- drivers/firmware/broadcom/bcm47xx_nvram.c | 24 ++++++++++++-----------
- 1 file changed, 13 insertions(+), 11 deletions(-)
-
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -48,11 +48,13 @@ static u32 find_nvram_size(void __iomem
- 	return 0;
- }
- 
--/* Probe for NVRAM header */
--static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
-+/**
-+ * bcm47xx_nvram_find_and_copy - find NVRAM on flash mapping & copy it
-+ */
-+static int bcm47xx_nvram_find_and_copy(void __iomem *flash_start, size_t res_size)
- {
- 	struct nvram_header __iomem *header;
--	u32 off;
-+	size_t flash_size;
- 	u32 size;
- 
- 	if (nvram_len) {
-@@ -61,25 +63,25 @@ static int nvram_find_and_copy(void __io
- 	}
- 
- 	/* TODO: when nvram is on nand flash check for bad blocks first. */
--	off = FLASH_MIN;
--	while (off <= lim) {
-+	flash_size = FLASH_MIN;
-+	while (flash_size <= res_size) {
- 		/* Windowed flash access */
--		size = find_nvram_size(iobase + off);
-+		size = find_nvram_size(flash_start + flash_size);
- 		if (size) {
--			header = (struct nvram_header *)(iobase + off - size);
-+			header = (struct nvram_header *)(flash_start + flash_size - size);
- 			goto found;
- 		}
--		off <<= 1;
-+		flash_size <<= 1;
- 	}
- 
- 	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
--	header = (struct nvram_header *)(iobase + 4096);
-+	header = (struct nvram_header *)(flash_start + 4096);
- 	if (header->magic == NVRAM_MAGIC) {
- 		size = NVRAM_SPACE;
- 		goto found;
- 	}
- 
--	header = (struct nvram_header *)(iobase + 1024);
-+	header = (struct nvram_header *)(flash_start + 1024);
- 	if (header->magic == NVRAM_MAGIC) {
- 		size = NVRAM_SPACE;
- 		goto found;
-@@ -124,7 +126,7 @@ int bcm47xx_nvram_init_from_mem(u32 base
- 	if (!iobase)
- 		return -ENOMEM;
- 
--	err = nvram_find_and_copy(iobase, lim);
-+	err = bcm47xx_nvram_find_and_copy(iobase, lim);
- 
- 	iounmap(iobase);
- 
diff --git a/target/linux/generic/backport-5.4/831-v5.13-0002-firmware-bcm47xx_nvram-add-helper-checking-for-NVRAM.patch b/target/linux/generic/backport-5.4/831-v5.13-0002-firmware-bcm47xx_nvram-add-helper-checking-for-NVRAM.patch
deleted file mode 100644
index 6ab072883d..0000000000
--- a/target/linux/generic/backport-5.4/831-v5.13-0002-firmware-bcm47xx_nvram-add-helper-checking-for-NVRAM.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 0a24b51a3264a3f942a75025ea5ff6133c8989b0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 8 Mar 2021 10:03:17 +0100
-Subject: [PATCH] firmware: bcm47xx_nvram: add helper checking for NVRAM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This avoids duplicating code doing casting and checking for NVRAM magic.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- drivers/firmware/broadcom/bcm47xx_nvram.c | 30 ++++++++++++++---------
- 1 file changed, 18 insertions(+), 12 deletions(-)
-
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -34,14 +34,20 @@ static char nvram_buf[NVRAM_SPACE];
- static size_t nvram_len;
- static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
- 
-+/**
-+ * bcm47xx_nvram_is_valid - check for a valid NVRAM at specified memory
-+ */
-+static bool bcm47xx_nvram_is_valid(void __iomem *nvram)
-+{
-+	return ((struct nvram_header *)nvram)->magic == NVRAM_MAGIC;
-+}
-+
- static u32 find_nvram_size(void __iomem *end)
- {
--	struct nvram_header __iomem *header;
- 	int i;
- 
- 	for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
--		header = (struct nvram_header *)(end - nvram_sizes[i]);
--		if (header->magic == NVRAM_MAGIC)
-+		if (bcm47xx_nvram_is_valid(end - nvram_sizes[i]))
- 			return nvram_sizes[i];
- 	}
- 
-@@ -55,6 +61,7 @@ static int bcm47xx_nvram_find_and_copy(v
- {
- 	struct nvram_header __iomem *header;
- 	size_t flash_size;
-+	size_t offset;
- 	u32 size;
- 
- 	if (nvram_len) {
-@@ -68,31 +75,30 @@ static int bcm47xx_nvram_find_and_copy(v
- 		/* Windowed flash access */
- 		size = find_nvram_size(flash_start + flash_size);
- 		if (size) {
--			header = (struct nvram_header *)(flash_start + flash_size - size);
-+			offset = flash_size - size;
- 			goto found;
- 		}
- 		flash_size <<= 1;
- 	}
- 
- 	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
--	header = (struct nvram_header *)(flash_start + 4096);
--	if (header->magic == NVRAM_MAGIC) {
--		size = NVRAM_SPACE;
-+
-+	offset = 4096;
-+	if (bcm47xx_nvram_is_valid(flash_start + offset))
- 		goto found;
--	}
- 
--	header = (struct nvram_header *)(flash_start + 1024);
--	if (header->magic == NVRAM_MAGIC) {
--		size = NVRAM_SPACE;
-+	offset = 1024;
-+	if (bcm47xx_nvram_is_valid(flash_start + offset))
- 		goto found;
--	}
- 
- 	pr_err("no nvram found\n");
- 	return -ENXIO;
- 
- found:
-+	header = (struct nvram_header *)(flash_start + offset);
- 	__ioread32_copy(nvram_buf, header, sizeof(*header) / 4);
- 	nvram_len = ((struct nvram_header *)(nvram_buf))->len;
-+	size = res_size - offset;
- 	if (nvram_len > size) {
- 		pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n");
- 		nvram_len = size;
diff --git a/target/linux/generic/backport-5.4/831-v5.13-0003-firmware-bcm47xx_nvram-extract-code-copying-NVRAM.patch b/target/linux/generic/backport-5.4/831-v5.13-0003-firmware-bcm47xx_nvram-extract-code-copying-NVRAM.patch
deleted file mode 100644
index a1351f1197..0000000000
--- a/target/linux/generic/backport-5.4/831-v5.13-0003-firmware-bcm47xx_nvram-extract-code-copying-NVRAM.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 298923cf999cecd2ef06df126f85a3d68da8c4d8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 8 Mar 2021 10:03:18 +0100
-Subject: [PATCH] firmware: bcm47xx_nvram: extract code copying NVRAM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This simplifies function finding NVRAM. It doesn't directly deal with
-NVRAM structure anymore and is a bit smaller.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- drivers/firmware/broadcom/bcm47xx_nvram.c | 43 +++++++++++++----------
- 1 file changed, 25 insertions(+), 18 deletions(-)
-
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -55,11 +55,34 @@ static u32 find_nvram_size(void __iomem
- }
- 
- /**
-+ * bcm47xx_nvram_copy - copy NVRAM to internal buffer
-+ */
-+static void bcm47xx_nvram_copy(void __iomem *nvram_start, size_t res_size)
-+{
-+	struct nvram_header __iomem *header = nvram_start;
-+	size_t copy_size;
-+
-+	copy_size = header->len;
-+	if (copy_size > res_size) {
-+		pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n");
-+		copy_size = res_size;
-+	}
-+	if (copy_size >= NVRAM_SPACE) {
-+		pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
-+		       copy_size, NVRAM_SPACE - 1);
-+		copy_size = NVRAM_SPACE - 1;
-+	}
-+
-+	__ioread32_copy(nvram_buf, nvram_start, DIV_ROUND_UP(copy_size, 4));
-+	nvram_buf[NVRAM_SPACE - 1] = '\0';
-+	nvram_len = copy_size;
-+}
-+
-+/**
-  * bcm47xx_nvram_find_and_copy - find NVRAM on flash mapping & copy it
-  */
- static int bcm47xx_nvram_find_and_copy(void __iomem *flash_start, size_t res_size)
- {
--	struct nvram_header __iomem *header;
- 	size_t flash_size;
- 	size_t offset;
- 	u32 size;
-@@ -95,23 +118,7 @@ static int bcm47xx_nvram_find_and_copy(v
- 	return -ENXIO;
- 
- found:
--	header = (struct nvram_header *)(flash_start + offset);
--	__ioread32_copy(nvram_buf, header, sizeof(*header) / 4);
--	nvram_len = ((struct nvram_header *)(nvram_buf))->len;
--	size = res_size - offset;
--	if (nvram_len > size) {
--		pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n");
--		nvram_len = size;
--	}
--	if (nvram_len >= NVRAM_SPACE) {
--		pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
--		       nvram_len, NVRAM_SPACE - 1);
--		nvram_len = NVRAM_SPACE - 1;
--	}
--	/* proceed reading data after header */
--	__ioread32_copy(nvram_buf + sizeof(*header), header + 1,
--			DIV_ROUND_UP(nvram_len, 4));
--	nvram_buf[NVRAM_SPACE - 1] = '\0';
-+	bcm47xx_nvram_copy(flash_start + offset, res_size - offset);
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-5.4/831-v5.13-0004-firmware-bcm47xx_nvram-look-for-NVRAM-with-for-inste.patch b/target/linux/generic/backport-5.4/831-v5.13-0004-firmware-bcm47xx_nvram-look-for-NVRAM-with-for-inste.patch
deleted file mode 100644
index 059a13220b..0000000000
--- a/target/linux/generic/backport-5.4/831-v5.13-0004-firmware-bcm47xx_nvram-look-for-NVRAM-with-for-inste.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 98b68324f67236e8c9152976535dc1f27fb67ba8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 8 Mar 2021 10:03:19 +0100
-Subject: [PATCH] firmware: bcm47xx_nvram: look for NVRAM with for instead of
- while
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This loop requires variable initialization, stop condition and post
-iteration increment. It's pretty much a for loop definition.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- drivers/firmware/broadcom/bcm47xx_nvram.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -93,15 +93,13 @@ static int bcm47xx_nvram_find_and_copy(v
- 	}
- 
- 	/* TODO: when nvram is on nand flash check for bad blocks first. */
--	flash_size = FLASH_MIN;
--	while (flash_size <= res_size) {
-+	for (flash_size = FLASH_MIN; flash_size <= res_size; flash_size <<= 1) {
- 		/* Windowed flash access */
- 		size = find_nvram_size(flash_start + flash_size);
- 		if (size) {
- 			offset = flash_size - size;
- 			goto found;
- 		}
--		flash_size <<= 1;
- 	}
- 
- 	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
diff --git a/target/linux/generic/backport-5.4/831-v5.13-0005-firmware-bcm47xx_nvram-inline-code-checking-NVRAM-si.patch b/target/linux/generic/backport-5.4/831-v5.13-0005-firmware-bcm47xx_nvram-inline-code-checking-NVRAM-si.patch
deleted file mode 100644
index 21d250049e..0000000000
--- a/target/linux/generic/backport-5.4/831-v5.13-0005-firmware-bcm47xx_nvram-inline-code-checking-NVRAM-si.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From f52da4ccfec9192e17f5c16260dfdd6d3ea76f65 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 8 Mar 2021 10:03:20 +0100
-Subject: [PATCH] firmware: bcm47xx_nvram: inline code checking NVRAM size
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Separated function was not improving code quality much (or at all).
-Moreover it expected possible flash end address as argument and it was
-returning NVRAM size.
-
-The new code always operates on offsets which means less logic and less
-calculations.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- drivers/firmware/broadcom/bcm47xx_nvram.c | 25 +++++++----------------
- 1 file changed, 7 insertions(+), 18 deletions(-)
-
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -42,18 +42,6 @@ static bool bcm47xx_nvram_is_valid(void
- 	return ((struct nvram_header *)nvram)->magic == NVRAM_MAGIC;
- }
- 
--static u32 find_nvram_size(void __iomem *end)
--{
--	int i;
--
--	for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
--		if (bcm47xx_nvram_is_valid(end - nvram_sizes[i]))
--			return nvram_sizes[i];
--	}
--
--	return 0;
--}
--
- /**
-  * bcm47xx_nvram_copy - copy NVRAM to internal buffer
-  */
-@@ -85,7 +73,7 @@ static int bcm47xx_nvram_find_and_copy(v
- {
- 	size_t flash_size;
- 	size_t offset;
--	u32 size;
-+	int i;
- 
- 	if (nvram_len) {
- 		pr_warn("nvram already initialized\n");
-@@ -93,12 +81,13 @@ static int bcm47xx_nvram_find_and_copy(v
- 	}
- 
- 	/* TODO: when nvram is on nand flash check for bad blocks first. */
-+
-+	/* Try every possible flash size and check for NVRAM at its end */
- 	for (flash_size = FLASH_MIN; flash_size <= res_size; flash_size <<= 1) {
--		/* Windowed flash access */
--		size = find_nvram_size(flash_start + flash_size);
--		if (size) {
--			offset = flash_size - size;
--			goto found;
-+		for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
-+			offset = flash_size - nvram_sizes[i];
-+			if (bcm47xx_nvram_is_valid(flash_start + offset))
-+				goto found;
- 		}
- 	}
- 
diff --git a/target/linux/generic/backport-5.4/850-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch b/target/linux/generic/backport-5.4/850-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch
deleted file mode 100644
index 494c88a496..0000000000
--- a/target/linux/generic/backport-5.4/850-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From 2d5ba37461013253d2ff0a3641b727fd32ea97a9 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Tue, 23 Feb 2021 18:44:53 +0100
-Subject: [PATCH 1/3] usb: ehci: add spurious flag to disable overcurrent
- checking
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch adds an ignore_oc flag which can be set by EHCI controller
-not supporting or wanting to disable overcurrent checking. The EHCI
-platform data in include/linux/usb/ehci_pdriver.h is also augmented to
-take advantage of this new flag.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: �lvaro Fernández Rojas <noltari@gmail.com>
-Link: https://lore.kernel.org/r/20210223174455.1378-2-noltari@gmail.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/ehci-hcd.c      | 2 +-
- drivers/usb/host/ehci-hub.c      | 4 ++--
- drivers/usb/host/ehci-platform.c | 2 ++
- drivers/usb/host/ehci.h          | 1 +
- include/linux/usb/ehci_pdriver.h | 1 +
- 5 files changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -660,7 +660,7 @@ static int ehci_run (struct usb_hcd *hcd
- 		"USB %x.%x started, EHCI %x.%02x%s\n",
- 		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
- 		temp >> 8, temp & 0xff,
--		ignore_oc ? ", overcurrent ignored" : "");
-+		(ignore_oc || ehci->spurious_oc) ? ", overcurrent ignored" : "");
- 
- 	ehci_writel(ehci, INTR_MASK,
- 		    &ehci->regs->intr_enable); /* Turn On Interrupts */
---- a/drivers/usb/host/ehci-hub.c
-+++ b/drivers/usb/host/ehci-hub.c
-@@ -643,7 +643,7 @@ ehci_hub_status_data (struct usb_hcd *hc
- 	 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
- 	 * PORT_POWER; that's surprising, but maybe within-spec.
- 	 */
--	if (!ignore_oc)
-+	if (!ignore_oc && !ehci->spurious_oc)
- 		mask = PORT_CSC | PORT_PEC | PORT_OCC;
- 	else
- 		mask = PORT_CSC | PORT_PEC;
-@@ -1013,7 +1013,7 @@ int ehci_hub_control(
- 		if (temp & PORT_PEC)
- 			status |= USB_PORT_STAT_C_ENABLE << 16;
- 
--		if ((temp & PORT_OCC) && !ignore_oc){
-+		if ((temp & PORT_OCC) && (!ignore_oc && !ehci->spurious_oc)){
- 			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
- 
- 			/*
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -325,6 +325,8 @@ static int ehci_platform_probe(struct pl
- 		hcd->has_tt = 1;
- 	if (pdata->reset_on_resume)
- 		priv->reset_on_resume = true;
-+	if (pdata->spurious_oc)
-+		ehci->spurious_oc = 1;
- 
- #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
- 	if (ehci->big_endian_mmio) {
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -219,6 +219,7 @@ struct ehci_hcd {			/* one per controlle
- 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
- 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
- 	unsigned		is_aspeed:1;
-+	unsigned		spurious_oc:1;
- 
- 	/* required for usb32 quirk */
- 	#define OHCI_CTRL_HCFS          (3 << 6)
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -50,6 +50,7 @@ struct usb_ehci_pdata {
- 	unsigned	no_io_watchdog:1;
- 	unsigned	reset_on_resume:1;
- 	unsigned	dma_mask_64:1;
-+	unsigned	spurious_oc:1;
- 
- 	/* Turn on all power and clocks */
- 	int (*power_on)(struct platform_device *pdev);
diff --git a/target/linux/generic/backport-5.4/851-v5.13-usb-host-ehci-platform-add-spurious_oc-DT-support.patch b/target/linux/generic/backport-5.4/851-v5.13-usb-host-ehci-platform-add-spurious_oc-DT-support.patch
deleted file mode 100644
index 6faefeb79c..0000000000
--- a/target/linux/generic/backport-5.4/851-v5.13-usb-host-ehci-platform-add-spurious_oc-DT-support.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 4da57dbbffdfa7fe4e2b70b047fc5ff95ff25a3d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Tue, 23 Feb 2021 18:44:55 +0100
-Subject: [PATCH 3/3] usb: host: ehci-platform: add spurious_oc DT support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Over-current reporting isn't supported on some platforms such as bcm63xx.
-These devices will incorrectly report over-current if this flag isn't properly
-activated.
-
-Signed-off-by: �lvaro Fernández Rojas <noltari@gmail.com>
-Link: https://lore.kernel.org/r/20210223174455.1378-4-noltari@gmail.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/ehci-platform.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -278,6 +278,9 @@ static int ehci_platform_probe(struct pl
- 		if (of_property_read_bool(dev->dev.of_node, "big-endian"))
- 			ehci->big_endian_mmio = ehci->big_endian_desc = 1;
- 
-+		if (of_property_read_bool(dev->dev.of_node, "spurious-oc"))
-+			ehci->spurious_oc = 1;
-+
- 		if (of_property_read_bool(dev->dev.of_node,
- 					  "needs-reset-on-resume"))
- 			priv->reset_on_resume = true;
diff --git a/target/linux/generic/backport-5.4/852-v5.10-0001-net-sfp-VSOL-V2801F-CarlitoxxPro-CPGOS03-0490-v2.0-w.patch b/target/linux/generic/backport-5.4/852-v5.10-0001-net-sfp-VSOL-V2801F-CarlitoxxPro-CPGOS03-0490-v2.0-w.patch
deleted file mode 100644
index 1901054a10..0000000000
--- a/target/linux/generic/backport-5.4/852-v5.10-0001-net-sfp-VSOL-V2801F-CarlitoxxPro-CPGOS03-0490-v2.0-w.patch
+++ /dev/null
@@ -1,144 +0,0 @@
-From 0d035bed2a4a6c4878518749348be61bf082d12a Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Wed, 9 Dec 2020 11:22:49 +0000
-Subject: [PATCH] net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0
- workaround
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add a workaround for the detection of VSOL V2801F / CarlitoxxPro
-CPGOS03-0490 v2.0 GPON module which CarlitoxxPro states needs single
-byte I2C reads to the EEPROM.
-
-Pali Rohár reports that he also has a CarlitoxxPro-based V2801F module,
-which reports a manufacturer of "OEM". This manufacturer can't be
-matched as it appears in many different modules, so also match the part
-number too.
-
-Reported-by: Thomas Schreiber <tschreibe@gmail.com>
-Reported-by: Pali Rohár <pali@kernel.org>
-Tested-by: Pali Rohár <pali@kernel.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/sfp.c | 63 +++++++++++++++++++++++++++++++++++++++----
- 1 file changed, 58 insertions(+), 5 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -191,6 +191,7 @@ struct sfp {
- 	struct sfp_bus *sfp_bus;
- 	struct phy_device *mod_phy;
- 	const struct sff_data *type;
-+	size_t i2c_block_size;
- 	u32 max_power_mW;
- 
- 	unsigned int (*get_state)(struct sfp *);
-@@ -305,10 +306,19 @@ static int sfp_i2c_read(struct sfp *sfp,
- 			size_t len)
- {
- 	struct i2c_msg msgs[2];
--	u8 bus_addr = a2 ? 0x51 : 0x50;
-+	size_t block_size;
- 	size_t this_len;
-+	u8 bus_addr;
- 	int ret;
- 
-+	if (a2) {
-+		block_size = 16;
-+		bus_addr = 0x51;
-+	} else {
-+		block_size = sfp->i2c_block_size;
-+		bus_addr = 0x50;
-+	}
-+
- 	msgs[0].addr = bus_addr;
- 	msgs[0].flags = 0;
- 	msgs[0].len = 1;
-@@ -320,8 +330,8 @@ static int sfp_i2c_read(struct sfp *sfp,
- 
- 	while (len) {
- 		this_len = len;
--		if (this_len > 16)
--			this_len = 16;
-+		if (this_len > block_size)
-+			this_len = block_size;
- 
- 		msgs[1].len = this_len;
- 
-@@ -1569,6 +1579,28 @@ static int sfp_sm_mod_hpower(struct sfp
- 	return 0;
- }
- 
-+/* Some modules (Nokia 3FE46541AA) lock up if byte 0x51 is read as a
-+ * single read. Switch back to reading 16 byte blocks unless we have
-+ * a CarlitoxxPro module (rebranded VSOL V2801F). Even more annoyingly,
-+ * some VSOL V2801F have the vendor name changed to OEM.
-+ */
-+static int sfp_quirk_i2c_block_size(const struct sfp_eeprom_base *base)
-+{
-+	if (!memcmp(base->vendor_name, "VSOL            ", 16))
-+		return 1;
-+	if (!memcmp(base->vendor_name, "OEM             ", 16) &&
-+	    !memcmp(base->vendor_pn,   "V2801F          ", 16))
-+		return 1;
-+
-+	/* Some modules can't cope with long reads */
-+	return 16;
-+}
-+
-+static void sfp_quirks_base(struct sfp *sfp, const struct sfp_eeprom_base *base)
-+{
-+	sfp->i2c_block_size = sfp_quirk_i2c_block_size(base);
-+}
-+
- static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
- {
- 	/* SFP module inserted - read I2C data */
-@@ -1577,14 +1609,20 @@ static int sfp_sm_mod_probe(struct sfp *
- 	u8 check;
- 	int ret;
- 
--	ret = sfp_read(sfp, false, 0, &id, sizeof(id));
-+	/* Some modules (CarlitoxxPro CPGOS03-0490) do not support multibyte
-+	 * reads from the EEPROM, so start by reading the base identifying
-+	 * information one byte at a time.
-+	 */
-+	sfp->i2c_block_size = 1;
-+
-+	ret = sfp_read(sfp, false, 0, &id.base, sizeof(id.base));
- 	if (ret < 0) {
- 		if (report)
- 			dev_err(sfp->dev, "failed to read EEPROM: %d\n", ret);
- 		return -EAGAIN;
- 	}
- 
--	if (ret != sizeof(id)) {
-+	if (ret != sizeof(id.base)) {
- 		dev_err(sfp->dev, "EEPROM short read: %d\n", ret);
- 		return -EAGAIN;
- 	}
-@@ -1612,6 +1650,21 @@ static int sfp_sm_mod_probe(struct sfp *
- 		}
- 	}
- 
-+	/* Apply any early module-specific quirks */
-+	sfp_quirks_base(sfp, &id.base);
-+
-+	ret = sfp_read(sfp, false, SFP_CC_BASE + 1, &id.ext, sizeof(id.ext));
-+	if (ret < 0) {
-+		if (report)
-+			dev_err(sfp->dev, "failed to read EEPROM: %d\n", ret);
-+		return -EAGAIN;
-+	}
-+
-+	if (ret != sizeof(id.ext)) {
-+		dev_err(sfp->dev, "EEPROM short read: %d\n", ret);
-+		return -EAGAIN;
-+	}
-+
- 	check = sfp_check(&id.ext, sizeof(id.ext) - 1);
- 	if (check != id.ext.cc_ext) {
- 		if (cotsworks) {
diff --git a/target/linux/generic/backport-5.4/852-v5.10-0002-net-sfp-add-workaround-for-Realtek-RTL8672-and-RTL96.patch b/target/linux/generic/backport-5.4/852-v5.10-0002-net-sfp-add-workaround-for-Realtek-RTL8672-and-RTL96.patch
deleted file mode 100644
index 27ae97cee7..0000000000
--- a/target/linux/generic/backport-5.4/852-v5.10-0002-net-sfp-add-workaround-for-Realtek-RTL8672-and-RTL96.patch
+++ /dev/null
@@ -1,211 +0,0 @@
-From 426c6cbc409cbda9ab1a9dbf15d3c2ef947eb8c1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Mon, 25 Jan 2021 16:02:27 +0100
-Subject: [PATCH] net: sfp: add workaround for Realtek RTL8672 and RTL9601C
- chips
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The workaround for VSOL V2801F brand based GPON SFP modules added in commit
-0d035bed2a4a ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0
-workaround") works only for IDs added explicitly to the list. Since there
-are rebranded modules where OEM vendors put different strings into the
-vendor name field, we cannot base workaround on IDs only.
-
-Moreover the issue which the above mentioned commit tried to work around is
-generic not only to VSOL based modules, but rather to all GPON modules
-based on Realtek RTL8672 and RTL9601C chips.
-
-These include at least the following GPON modules:
-* V-SOL V2801F
-* C-Data FD511GX-RM0
-* OPTON GP801R
-* BAUDCOM BD-1234-SFM
-* CPGOS03-0490 v2.0
-* Ubiquiti U-Fiber Instant
-* EXOT EGS1
-
-These Realtek chips have broken EEPROM emulator which for N-byte read
-operation returns just the first byte of EEPROM data, followed by N-1
-zeros.
-
-Introduce a new function, sfp_id_needs_byte_io(), which detects SFP modules
-with broken EEPROM emulator based on N-1 zeros and switch to 1 byte EEPROM
-reading operation.
-
-Function sfp_i2c_read() now always uses single byte reading when it is
-required and when function sfp_hwmon_probe() detects single byte access,
-it disables registration of hwmon device, because in this case we cannot
-reliably and atomically read 2 bytes as is required by the standard for
-retrieving values from diagnostic area.
-
-(These Realtek chips are broken in a way that violates SFP standards for
-diagnostic interface. Kernel in this case simply cannot do anything less
-of skipping registration of the hwmon interface.)
-
-This patch fixes reading of EEPROM content from SFP modules based on
-Realtek RTL8672 and RTL9601C chips. Diagnostic interface of EEPROM stays
-broken and cannot be fixed.
-
-Fixes: 0d035bed2a4a ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround")
-Co-developed-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/sfp.c | 100 ++++++++++++++++++++++++++++--------------
- 1 file changed, 67 insertions(+), 33 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -306,19 +306,11 @@ static int sfp_i2c_read(struct sfp *sfp,
- 			size_t len)
- {
- 	struct i2c_msg msgs[2];
--	size_t block_size;
-+	u8 bus_addr = a2 ? 0x51 : 0x50;
-+	size_t block_size = sfp->i2c_block_size;
- 	size_t this_len;
--	u8 bus_addr;
- 	int ret;
- 
--	if (a2) {
--		block_size = 16;
--		bus_addr = 0x51;
--	} else {
--		block_size = sfp->i2c_block_size;
--		bus_addr = 0x50;
--	}
--
- 	msgs[0].addr = bus_addr;
- 	msgs[0].flags = 0;
- 	msgs[0].len = 1;
-@@ -1245,6 +1237,20 @@ static void sfp_hwmon_probe(struct work_
- 	struct sfp *sfp = container_of(work, struct sfp, hwmon_probe.work);
- 	int err, i;
- 
-+	/* hwmon interface needs to access 16bit registers in atomic way to
-+	 * guarantee coherency of the diagnostic monitoring data. If it is not
-+	 * possible to guarantee coherency because EEPROM is broken in such way
-+	 * that does not support atomic 16bit read operation then we have to
-+	 * skip registration of hwmon device.
-+	 */
-+	if (sfp->i2c_block_size < 2) {
-+		dev_info(sfp->dev,
-+			 "skipping hwmon device registration due to broken EEPROM\n");
-+		dev_info(sfp->dev,
-+			 "diagnostic EEPROM area cannot be read atomically to guarantee data coherency\n");
-+		return;
-+	}
-+
- 	err = sfp_read(sfp, true, 0, &sfp->diag, sizeof(sfp->diag));
- 	if (err < 0) {
- 		if (sfp->hwmon_tries--) {
-@@ -1579,26 +1585,30 @@ static int sfp_sm_mod_hpower(struct sfp
- 	return 0;
- }
- 
--/* Some modules (Nokia 3FE46541AA) lock up if byte 0x51 is read as a
-- * single read. Switch back to reading 16 byte blocks unless we have
-- * a CarlitoxxPro module (rebranded VSOL V2801F). Even more annoyingly,
-- * some VSOL V2801F have the vendor name changed to OEM.
-+/* GPON modules based on Realtek RTL8672 and RTL9601C chips (e.g. V-SOL
-+ * V2801F, CarlitoxxPro CPGOS03-0490, Ubiquiti U-Fiber Instant, ...) do
-+ * not support multibyte reads from the EEPROM. Each multi-byte read
-+ * operation returns just one byte of EEPROM followed by zeros. There is
-+ * no way to identify which modules are using Realtek RTL8672 and RTL9601C
-+ * chips. Moreover every OEM of V-SOL V2801F module puts its own vendor
-+ * name and vendor id into EEPROM, so there is even no way to detect if
-+ * module is V-SOL V2801F. Therefore check for those zeros in the read
-+ * data and then based on check switch to reading EEPROM to one byte
-+ * at a time.
-  */
--static int sfp_quirk_i2c_block_size(const struct sfp_eeprom_base *base)
-+static bool sfp_id_needs_byte_io(struct sfp *sfp, void *buf, size_t len)
- {
--	if (!memcmp(base->vendor_name, "VSOL            ", 16))
--		return 1;
--	if (!memcmp(base->vendor_name, "OEM             ", 16) &&
--	    !memcmp(base->vendor_pn,   "V2801F          ", 16))
--		return 1;
-+	size_t i, block_size = sfp->i2c_block_size;
- 
--	/* Some modules can't cope with long reads */
--	return 16;
--}
-+	/* Already using byte IO */
-+	if (block_size == 1)
-+		return false;
- 
--static void sfp_quirks_base(struct sfp *sfp, const struct sfp_eeprom_base *base)
--{
--	sfp->i2c_block_size = sfp_quirk_i2c_block_size(base);
-+	for (i = 1; i < len; i += block_size) {
-+		if (memchr_inv(buf + i, '\0', min(block_size - 1, len - i)))
-+			return false;
-+	}
-+	return true;
- }
- 
- static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
-@@ -1609,11 +1619,11 @@ static int sfp_sm_mod_probe(struct sfp *
- 	u8 check;
- 	int ret;
- 
--	/* Some modules (CarlitoxxPro CPGOS03-0490) do not support multibyte
--	 * reads from the EEPROM, so start by reading the base identifying
--	 * information one byte at a time.
-+	/* Some SFP modules and also some Linux I2C drivers do not like reads
-+	 * longer than 16 bytes, so read the EEPROM in chunks of 16 bytes at
-+	 * a time.
- 	 */
--	sfp->i2c_block_size = 1;
-+	sfp->i2c_block_size = 16;
- 
- 	ret = sfp_read(sfp, false, 0, &id.base, sizeof(id.base));
- 	if (ret < 0) {
-@@ -1627,6 +1637,33 @@ static int sfp_sm_mod_probe(struct sfp *
- 		return -EAGAIN;
- 	}
- 
-+	/* Some SFP modules (e.g. Nokia 3FE46541AA) lock up if read from
-+	 * address 0x51 is just one byte at a time. Also SFF-8472 requires
-+	 * that EEPROM supports atomic 16bit read operation for diagnostic
-+	 * fields, so do not switch to one byte reading at a time unless it
-+	 * is really required and we have no other option.
-+	 */
-+	if (sfp_id_needs_byte_io(sfp, &id.base, sizeof(id.base))) {
-+		dev_info(sfp->dev,
-+			 "Detected broken RTL8672/RTL9601C emulated EEPROM\n");
-+		dev_info(sfp->dev,
-+			 "Switching to reading EEPROM to one byte at a time\n");
-+		sfp->i2c_block_size = 1;
-+
-+		ret = sfp_read(sfp, false, 0, &id.base, sizeof(id.base));
-+		if (ret < 0) {
-+			if (report)
-+				dev_err(sfp->dev, "failed to read EEPROM: %d\n",
-+					ret);
-+			return -EAGAIN;
-+		}
-+
-+		if (ret != sizeof(id.base)) {
-+			dev_err(sfp->dev, "EEPROM short read: %d\n", ret);
-+			return -EAGAIN;
-+		}
-+	}
-+
- 	/* Cotsworks do not seem to update the checksums when they
- 	 * do the final programming with the final module part number,
- 	 * serial number and date code.
-@@ -1650,9 +1687,6 @@ static int sfp_sm_mod_probe(struct sfp *
- 		}
- 	}
- 
--	/* Apply any early module-specific quirks */
--	sfp_quirks_base(sfp, &id.base);
--
- 	ret = sfp_read(sfp, false, SFP_CC_BASE + 1, &id.ext, sizeof(id.ext));
- 	if (ret < 0) {
- 		if (report)
diff --git a/target/linux/generic/backport-5.4/900-v5.9-0001-dt-bindings-Add-multicolor-class-dt-bindings-documen.patch b/target/linux/generic/backport-5.4/900-v5.9-0001-dt-bindings-Add-multicolor-class-dt-bindings-documen.patch
deleted file mode 100644
index acc32b69fb..0000000000
--- a/target/linux/generic/backport-5.4/900-v5.9-0001-dt-bindings-Add-multicolor-class-dt-bindings-documen.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 5c7f8ffe741daae7f8d811a2037b2693f02c90c5 Mon Sep 17 00:00:00 2001
-From: Dan Murphy <dmurphy@ti.com>
-Date: Mon, 13 Jul 2020 10:45:31 -0500
-Subject: [PATCH] dt: bindings: Add multicolor class dt bindings documention
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add DT bindings for the LEDs multicolor class framework.
-Add multicolor ID to the color ID list for device tree bindings.
-
-CC: Rob Herring <robh@kernel.org>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Acked-by: Pavel Machek <pavel@ucw.cz>
-Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
-Signed-off-by: Dan Murphy <dmurphy@ti.com>
-Reviewed-by: Marek Behún <marek.behun@nic.cz>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- .../bindings/leds/leds-class-multicolor.yaml  | 37 +++++++++++++++++++
- include/dt-bindings/leds/common.h             |  3 +-
- 2 files changed, 39 insertions(+), 1 deletion(-)
- create mode 100644 Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
-@@ -0,0 +1,37 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/leds/leds-class-multicolor.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Common properties for the multicolor LED class.
-+
-+maintainers:
-+  - Dan Murphy <dmurphy@ti.com>
-+
-+description: |
-+  Bindings for multi color LEDs show how to describe current outputs of
-+  either integrated multi-color LED elements (like RGB, RGBW, RGBWA-UV
-+  etc.) or standalone LEDs, to achieve logically grouped multi-color LED
-+  modules. This is achieved by adding multi-led nodes layer to the
-+  monochrome LED bindings.
-+  The nodes and properties defined in this document are unique to the multicolor
-+  LED class.  Common LED nodes and properties are inherited from the common.txt
-+  within this documentation directory.
-+
-+patternProperties:
-+  "^multi-led@([0-9a-f])$":
-+    type: object
-+    description: Represents the LEDs that are to be grouped.
-+    properties:
-+      color:
-+        const: 8  # LED_COLOR_ID_MULTI
-+        description: |
-+          For multicolor LED support this property should be defined as
-+          LED_COLOR_ID_MULTI which can be found in include/linux/leds/common.h.
-+
-+    $ref: "common.yaml#"
-+
-+    required:
-+      - color
-+...
---- a/include/dt-bindings/leds/common.h
-+++ b/include/dt-bindings/leds/common.h
-@@ -29,7 +29,8 @@
- #define LED_COLOR_ID_VIOLET	5
- #define LED_COLOR_ID_YELLOW	6
- #define LED_COLOR_ID_IR		7
--#define LED_COLOR_ID_MAX	8
-+#define LED_COLOR_ID_MULTI	8
-+#define LED_COLOR_ID_MAX	9
- 
- /* Standard LED functions */
- #define LED_FUNCTION_ACTIVITY "activity"
diff --git a/target/linux/generic/backport-5.4/900-v5.9-0002-leds-Add-multicolor-ID-to-the-color-ID-list.patch b/target/linux/generic/backport-5.4/900-v5.9-0002-leds-Add-multicolor-ID-to-the-color-ID-list.patch
deleted file mode 100644
index 5de5dbda04..0000000000
--- a/target/linux/generic/backport-5.4/900-v5.9-0002-leds-Add-multicolor-ID-to-the-color-ID-list.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 10d3e0d815879129e916cd83e1034438e06efdaa Mon Sep 17 00:00:00 2001
-From: Dan Murphy <dmurphy@ti.com>
-Date: Mon, 13 Jul 2020 10:45:32 -0500
-Subject: [PATCH] leds: Add multicolor ID to the color ID list
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add a new color ID that is declared as MULTICOLOR as with the
-multicolor framework declaring a definitive color is not accurate
-as the node can contain multiple colors.
-
-Signed-off-by: Dan Murphy <dmurphy@ti.com>
-Reviewed-by: Marek Behún <marek.behun@nic.cz>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/led-core.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/leds/led-core.c
-+++ b/drivers/leds/led-core.c
-@@ -34,6 +34,7 @@ const char * const led_colors[LED_COLOR_
- 	[LED_COLOR_ID_VIOLET] = "violet",
- 	[LED_COLOR_ID_YELLOW] = "yellow",
- 	[LED_COLOR_ID_IR] = "ir",
-+	[LED_COLOR_ID_MULTI] = "multicolor",
- };
- EXPORT_SYMBOL_GPL(led_colors);
- 
diff --git a/target/linux/generic/backport-5.4/900-v5.9-0003-leds-add-RGB-color-option-as-that-is-different-from-.patch b/target/linux/generic/backport-5.4/900-v5.9-0003-leds-add-RGB-color-option-as-that-is-different-from-.patch
deleted file mode 100644
index 17c28149f6..0000000000
--- a/target/linux/generic/backport-5.4/900-v5.9-0003-leds-add-RGB-color-option-as-that-is-different-from-.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 54212f5a1ba3123281877e54c1e5f672bf7563d8 Mon Sep 17 00:00:00 2001
-From: Pavel Machek <pavel@ucw.cz>
-Date: Mon, 3 Aug 2020 13:20:06 +0200
-Subject: [PATCH] leds: add RGB color option, as that is different from
- multicolor.
-
-Multicolor is a bit too abstract. Yes, we can have
-Green-Magenta-Ultraviolet LED, but so far all the LEDs we support are
-RGB, and not even RGB-White or RGB-Yellow variants emerged.
-
-Multicolor is not a good fit for RGB LED. It does not really know
-about LED color.  In particular, there's no way to make LED "white".
-
-Userspace is interested in knowing "this LED can produce arbitrary
-color", which not all multicolor LEDs can.
-
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/led-core.c           | 1 +
- drivers/leds/leds-lp55xx-common.c | 2 +-
- include/dt-bindings/leds/common.h | 6 ++++--
- 3 files changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/leds/led-core.c
-+++ b/drivers/leds/led-core.c
-@@ -35,6 +35,7 @@ const char * const led_colors[LED_COLOR_
- 	[LED_COLOR_ID_YELLOW] = "yellow",
- 	[LED_COLOR_ID_IR] = "ir",
- 	[LED_COLOR_ID_MULTI] = "multicolor",
-+	[LED_COLOR_ID_RGB] = "rgb",
- };
- EXPORT_SYMBOL_GPL(led_colors);
- 
---- a/include/dt-bindings/leds/common.h
-+++ b/include/dt-bindings/leds/common.h
-@@ -29,8 +29,10 @@
- #define LED_COLOR_ID_VIOLET	5
- #define LED_COLOR_ID_YELLOW	6
- #define LED_COLOR_ID_IR		7
--#define LED_COLOR_ID_MULTI	8
--#define LED_COLOR_ID_MAX	9
-+#define LED_COLOR_ID_MULTI	8	/* For multicolor LEDs */
-+#define LED_COLOR_ID_RGB	9	/* For multicolor LEDs that can do arbitrary color,
-+					   so this would include RGBW and similar */
-+#define LED_COLOR_ID_MAX	10
- 
- /* Standard LED functions */
- #define LED_FUNCTION_ACTIVITY "activity"
diff --git a/target/linux/generic/config-5.4 b/target/linux/generic/config-5.4
deleted file mode 100644
index 151f0ec1f3..0000000000
--- a/target/linux/generic/config-5.4
+++ /dev/null
@@ -1,6603 +0,0 @@
-# CONFIG_104_QUAD_8 is not set
-CONFIG_32BIT=y
-CONFIG_64BIT_TIME=y
-# CONFIG_6LOWPAN is not set
-# CONFIG_6LOWPAN_DEBUGFS is not set
-# CONFIG_6PACK is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_9P_FS is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_AB8500_CORE is not set
-# CONFIG_ABP060MG is not set
-# CONFIG_ABX500_CORE is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_ACENIC is not set
-# CONFIG_ACERHDF is not set
-# CONFIG_ACER_WIRELESS is not set
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_ACPI_ALS is not set
-# CONFIG_ACPI_APEI is not set
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_CONFIGFS is not set
-# CONFIG_ACPI_CUSTOM_METHOD is not set
-# CONFIG_ACPI_EXTLOG is not set
-# CONFIG_ACPI_HED is not set
-# CONFIG_ACPI_NFIT is not set
-# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
-# CONFIG_ACPI_TABLE_UPGRADE is not set
-# CONFIG_ACPI_VIDEO is not set
-# CONFIG_AD2S1200 is not set
-# CONFIG_AD2S1210 is not set
-# CONFIG_AD2S90 is not set
-# CONFIG_AD5064 is not set
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_AD5272 is not set
-# CONFIG_AD5360 is not set
-# CONFIG_AD5380 is not set
-# CONFIG_AD5421 is not set
-# CONFIG_AD5446 is not set
-# CONFIG_AD5449 is not set
-# CONFIG_AD5504 is not set
-# CONFIG_AD5592R is not set
-# CONFIG_AD5593R is not set
-# CONFIG_AD5624R_SPI is not set
-# CONFIG_AD5686 is not set
-# CONFIG_AD5686_SPI is not set
-# CONFIG_AD5696_I2C is not set
-# CONFIG_AD5755 is not set
-# CONFIG_AD5758 is not set
-# CONFIG_AD5761 is not set
-# CONFIG_AD5764 is not set
-# CONFIG_AD5791 is not set
-# CONFIG_AD5933 is not set
-# CONFIG_AD7124 is not set
-# CONFIG_AD7150 is not set
-# CONFIG_AD7152 is not set
-# CONFIG_AD7192 is not set
-# CONFIG_AD7266 is not set
-# CONFIG_AD7280 is not set
-# CONFIG_AD7291 is not set
-# CONFIG_AD7298 is not set
-# CONFIG_AD7303 is not set
-# CONFIG_AD7476 is not set
-# CONFIG_AD7606 is not set
-# CONFIG_AD7606_IFACE_PARALLEL is not set
-# CONFIG_AD7606_IFACE_SPI is not set
-# CONFIG_AD7746 is not set
-# CONFIG_AD7766 is not set
-# CONFIG_AD7768_1 is not set
-# CONFIG_AD7780 is not set
-# CONFIG_AD7791 is not set
-# CONFIG_AD7793 is not set
-# CONFIG_AD7816 is not set
-# CONFIG_AD7887 is not set
-# CONFIG_AD7923 is not set
-# CONFIG_AD7949 is not set
-# CONFIG_AD799X is not set
-# CONFIG_AD8366 is not set
-# CONFIG_AD8801 is not set
-# CONFIG_AD9523 is not set
-# CONFIG_AD9832 is not set
-# CONFIG_AD9834 is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_ADE7854 is not set
-# CONFIG_ADF4350 is not set
-# CONFIG_ADF4371 is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADIN_PHY is not set
-# CONFIG_ADIS16080 is not set
-# CONFIG_ADIS16130 is not set
-# CONFIG_ADIS16136 is not set
-# CONFIG_ADIS16201 is not set
-# CONFIG_ADIS16203 is not set
-# CONFIG_ADIS16209 is not set
-# CONFIG_ADIS16240 is not set
-# CONFIG_ADIS16260 is not set
-# CONFIG_ADIS16400 is not set
-# CONFIG_ADIS16460 is not set
-# CONFIG_ADIS16480 is not set
-# CONFIG_ADJD_S311 is not set
-# CONFIG_ADM6996_PHY is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_ADT7316 is not set
-CONFIG_ADVISE_SYSCALLS=y
-# CONFIG_ADXL345_I2C is not set
-# CONFIG_ADXL345_SPI is not set
-# CONFIG_ADXL372_I2C is not set
-# CONFIG_ADXL372_SPI is not set
-# CONFIG_ADXRS450 is not set
-CONFIG_AEABI=y
-# CONFIG_AFE4403 is not set
-# CONFIG_AFE4404 is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_AFS_DEBUG_CURSOR is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_AF_KCM is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_AF_RXRPC_INJECT_LOSS is not set
-# CONFIG_AF_RXRPC_IPV6 is not set
-# CONFIG_AGP is not set
-# CONFIG_AHCI_CEVA is not set
-# CONFIG_AHCI_IMX is not set
-# CONFIG_AHCI_MVEBU is not set
-# CONFIG_AHCI_QORIQ is not set
-# CONFIG_AHCI_XGENE is not set
-CONFIG_AIO=y
-# CONFIG_AIRO is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_AIX_PARTITION is not set
-# CONFIG_AK09911 is not set
-# CONFIG_AK8974 is not set
-# CONFIG_AK8975 is not set
-# CONFIG_AL3320A is not set
-# CONFIG_ALIM7101_WDT is not set
-CONFIG_ALLOW_DEV_COREDUMP=y
-# CONFIG_ALTERA_MBOX is not set
-# CONFIG_ALTERA_MSGDMA is not set
-# CONFIG_ALTERA_STAPL is not set
-# CONFIG_ALTERA_TSE is not set
-# CONFIG_ALX is not set
-# CONFIG_AL_FIC is not set
-# CONFIG_AM2315 is not set
-# CONFIG_AM335X_PHY_USB is not set
-# CONFIG_AMBA_PL08X is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_AMD_MEM_ENCRYPT is not set
-# CONFIG_AMD_PHY is not set
-# CONFIG_AMD_XGBE is not set
-# CONFIG_AMD_XGBE_HAVE_ECC is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_AMILO_RFKILL is not set
-# CONFIG_ANDROID is not set
-CONFIG_ANON_INODES=y
-# CONFIG_APDS9300 is not set
-# CONFIG_APDS9802ALS is not set
-# CONFIG_APDS9960 is not set
-# CONFIG_APM8018X is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_APPLE_GMUX is not set
-# CONFIG_APPLE_PROPERTIES is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_AQTION is not set
-# CONFIG_AQUANTIA_PHY is not set
-# CONFIG_AR5523 is not set
-# CONFIG_AR7 is not set
-# CONFIG_AR8216_PHY is not set
-# CONFIG_AR8216_PHY_LEDS is not set
-# CONFIG_ARCH_ACTIONS is not set
-# CONFIG_ARCH_AGILEX is not set
-# CONFIG_ARCH_ALPINE is not set
-# CONFIG_ARCH_ARTPEC is not set
-# CONFIG_ARCH_ASPEED is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_AXXIA is not set
-# CONFIG_ARCH_BCM is not set
-# CONFIG_ARCH_BCM2835 is not set
-# CONFIG_ARCH_BCM_21664 is not set
-# CONFIG_ARCH_BCM_23550 is not set
-# CONFIG_ARCH_BCM_281XX is not set
-# CONFIG_ARCH_BCM_5301X is not set
-# CONFIG_ARCH_BCM_53573 is not set
-# CONFIG_ARCH_BCM_63XX is not set
-# CONFIG_ARCH_BCM_CYGNUS is not set
-# CONFIG_ARCH_BCM_IPROC is not set
-# CONFIG_ARCH_BCM_NSP is not set
-# CONFIG_ARCH_BERLIN is not set
-# CONFIG_ARCH_BITMAIN is not set
-# CONFIG_ARCH_BRCMSTB is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_DIGICOLOR is not set
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_EXYNOS is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_GEMINI is not set
-CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
-# CONFIG_ARCH_HI3xxx is not set
-# CONFIG_ARCH_HIGHBANK is not set
-# CONFIG_ARCH_HISI is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_K3 is not set
-# CONFIG_ARCH_KEYSTONE is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_LAYERSCAPE is not set
-# CONFIG_ARCH_LG1K is not set
-# CONFIG_ARCH_LPC32XX is not set
-# CONFIG_ARCH_MEDIATEK is not set
-# CONFIG_ARCH_MESON is not set
-# CONFIG_ARCH_MILBEAUT is not set
-CONFIG_ARCH_MMAP_RND_BITS=8
-CONFIG_ARCH_MMAP_RND_BITS_MAX=16
-CONFIG_ARCH_MMAP_RND_BITS_MIN=8
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_MULTIPLATFORM is not set
-# CONFIG_ARCH_MULTI_V6 is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MVEBU is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_NPCM is not set
-# CONFIG_ARCH_NSPIRE is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP2PLUS is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_OXNAS is not set
-# CONFIG_ARCH_PICOXCELL is not set
-# CONFIG_ARCH_PRIMA2 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_QCOM is not set
-# CONFIG_ARCH_RDA is not set
-# CONFIG_ARCH_REALTEK is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_RENESAS is not set
-# CONFIG_ARCH_ROCKCHIP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_S3C24XX is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_SEATTLE is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_SIRF is not set
-# CONFIG_ARCH_SOCFPGA is not set
-# CONFIG_ARCH_SPRD is not set
-# CONFIG_ARCH_STI is not set
-# CONFIG_ARCH_STM32 is not set
-# CONFIG_ARCH_STRATIX10 is not set
-# CONFIG_ARCH_SUNXI is not set
-# CONFIG_ARCH_SYNQUACER is not set
-# CONFIG_ARCH_TANGO is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_THUNDER is not set
-# CONFIG_ARCH_THUNDER2 is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_UNIPHIER is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_VIRT is not set
-# CONFIG_ARCH_VT8500 is not set
-# CONFIG_ARCH_VULCAN is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_WANTS_THP_SWAP is not set
-# CONFIG_ARCH_WM8505 is not set
-# CONFIG_ARCH_WM8750 is not set
-# CONFIG_ARCH_WM8850 is not set
-# CONFIG_ARCH_XGENE is not set
-# CONFIG_ARCH_ZX is not set
-# CONFIG_ARCH_ZYNQ is not set
-# CONFIG_ARCH_ZYNQMP is not set
-# CONFIG_ARCNET is not set
-# CONFIG_ARC_EMAC is not set
-# CONFIG_ARC_IRQ_NO_AUTOSAVE is not set
-# CONFIG_ARM64_16K_PAGES is not set
-# CONFIG_ARM64_64K_PAGES is not set
-# CONFIG_ARM64_CRYPTO is not set
-# CONFIG_ARM64_ERRATUM_1024718 is not set
-# CONFIG_ARM64_ERRATUM_1165522 is not set
-# CONFIG_ARM64_ERRATUM_1286807 is not set
-# CONFIG_ARM64_ERRATUM_1418040 is not set
-# CONFIG_ARM64_ERRATUM_1463225 is not set
-# CONFIG_ARM64_ERRATUM_1542419 is not set
-# CONFIG_ARM64_ERRATUM_819472 is not set
-# CONFIG_ARM64_ERRATUM_824069 is not set
-# CONFIG_ARM64_ERRATUM_826319 is not set
-# CONFIG_ARM64_ERRATUM_827319 is not set
-# CONFIG_ARM64_ERRATUM_832075 is not set
-# CONFIG_ARM64_ERRATUM_834220 is not set
-# CONFIG_ARM64_ERRATUM_843419 is not set
-# CONFIG_ARM64_ERRATUM_845719 is not set
-# CONFIG_ARM64_ERRATUM_858921 is not set
-# CONFIG_ARM64_HW_AFDBM is not set
-# CONFIG_ARM64_LSE_ATOMICS is not set
-# CONFIG_ARM64_MODULE_PLTS is not set
-# CONFIG_ARM64_PAN is not set
-# CONFIG_ARM64_PMEM is not set
-# CONFIG_ARM64_PSEUDO_NMI is not set
-# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
-# CONFIG_ARM64_RAS_EXTN is not set
-# CONFIG_ARM64_RELOC_TEST is not set
-CONFIG_ARM64_SW_TTBR0_PAN=y
-# CONFIG_ARM64_UAO is not set
-# CONFIG_ARM64_VA_BITS_48 is not set
-# CONFIG_ARM64_VHE is not set
-# CONFIG_ARM_APPENDED_DTB is not set
-# CONFIG_ARM_ARCH_TIMER is not set
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
-# CONFIG_ARM_CCI is not set
-# CONFIG_ARM_CCI400_PMU is not set
-# CONFIG_ARM_CCI5xx_PMU is not set
-# CONFIG_ARM_CCI_PMU is not set
-# CONFIG_ARM_CCN is not set
-# CONFIG_ARM_CPUIDLE is not set
-CONFIG_ARM_CPU_TOPOLOGY=y
-# CONFIG_ARM_CRYPTO is not set
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-# CONFIG_ARM_DSU_PMU is not set
-# CONFIG_ARM_ERRATA_326103 is not set
-# CONFIG_ARM_ERRATA_364296 is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# CONFIG_ARM_ERRATA_643719 is not set
-# CONFIG_ARM_ERRATA_720789 is not set
-# CONFIG_ARM_ERRATA_742230 is not set
-# CONFIG_ARM_ERRATA_742231 is not set
-# CONFIG_ARM_ERRATA_743622 is not set
-# CONFIG_ARM_ERRATA_751472 is not set
-# CONFIG_ARM_ERRATA_754322 is not set
-# CONFIG_ARM_ERRATA_754327 is not set
-# CONFIG_ARM_ERRATA_764369 is not set
-# CONFIG_ARM_ERRATA_773022 is not set
-# CONFIG_ARM_ERRATA_775420 is not set
-# CONFIG_ARM_ERRATA_798181 is not set
-# CONFIG_ARM_ERRATA_814220 is not set
-# CONFIG_ARM_ERRATA_818325_852422 is not set
-# CONFIG_ARM_ERRATA_821420 is not set
-# CONFIG_ARM_ERRATA_825619 is not set
-# CONFIG_ARM_ERRATA_852421 is not set
-# CONFIG_ARM_ERRATA_852423 is not set
-# CONFIG_ARM_ERRATA_857271 is not set
-# CONFIG_ARM_ERRATA_857272 is not set
-CONFIG_ARM_GIC_MAX_NR=1
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
-# CONFIG_ARM_KPROBES_TEST is not set
-# CONFIG_ARM_LPAE is not set
-# CONFIG_ARM_MHU is not set
-# CONFIG_ARM_MODULE_PLTS is not set
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-# CONFIG_ARM_PSCI is not set
-# CONFIG_ARM_PSCI_CHECKER is not set
-# CONFIG_ARM_PSCI_CPUIDLE is not set
-# CONFIG_ARM_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM_SBSA_WATCHDOG is not set
-# CONFIG_ARM_SCPI_PROTOCOL is not set
-# CONFIG_ARM_SDE_INTERFACE is not set
-# CONFIG_ARM_SP805_WATCHDOG is not set
-# CONFIG_ARM_SPE_PMU is not set
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_ARM_TIMER_SP804 is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_ARM_VIRT_EXT is not set
-# CONFIG_AS3935 is not set
-# CONFIG_ASM9260_TIMER is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_ASUS_WIRELESS is not set
-# CONFIG_ASYMMETRIC_KEY_TYPE is not set
-# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set
-# CONFIG_ASYNC_RAID6_TEST is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AT803X_PHY is not set
-# CONFIG_AT91_SAMA5D2_ADC is not set
-# CONFIG_ATA is not set
-# CONFIG_ATAGS is not set
-CONFIG_ATAGS_PROC=y
-# CONFIG_ATALK is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_ATA_ACPI is not set
-CONFIG_ATA_BMDMA=y
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_ATA_LEDS is not set
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_ATA_PIIX is not set
-CONFIG_ATA_SFF=y
-# CONFIG_ATA_VERBOSE_ERROR is not set
-# CONFIG_ATH10K is not set
-# CONFIG_ATH25 is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH6KL is not set
-# CONFIG_ATH79 is not set
-# CONFIG_ATH9K is not set
-# CONFIG_ATH9K_HTC is not set
-# CONFIG_ATH_DEBUG is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1C is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL2 is not set
-# CONFIG_ATLAS_PH_SENSOR is not set
-# CONFIG_ATM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_ATMEL_PIT is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_BR2684 is not set
-CONFIG_ATM_BR2684_IPFILTER=y
-# CONFIG_ATM_CLIP is not set
-CONFIG_ATM_CLIP_NO_ICMP=y
-# CONFIG_ATM_DRIVERS is not set
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_MPOA is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_SOLOS is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_ATP is not set
-# CONFIG_AUDIT is not set
-# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
-# CONFIG_AURORA_NB8800 is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTO_ZRELADDR is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_AX25 is not set
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_AX88796 is not set
-# CONFIG_AX88796B_PHY is not set
-# CONFIG_AXP20X_ADC is not set
-# CONFIG_AXP20X_POWER is not set
-# CONFIG_AXP288_ADC is not set
-# CONFIG_AXP288_FUEL_GAUGE is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_B44 is not set
-# CONFIG_B53 is not set
-# CONFIG_B53_MDIO_DRIVER is not set
-# CONFIG_B53_MMAP_DRIVER is not set
-# CONFIG_B53_SERDES is not set
-# CONFIG_B53_SPI_DRIVER is not set
-# CONFIG_B53_SRAB_DRIVER is not set
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-# CONFIG_BACKLIGHT_APPLE is not set
-# CONFIG_BACKLIGHT_ARCXCNN is not set
-# CONFIG_BACKLIGHT_BD6107 is not set
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_BACKLIGHT_GPIO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_BACKLIGHT_LM3630A is not set
-# CONFIG_BACKLIGHT_LM3639 is not set
-# CONFIG_BACKLIGHT_LP855X is not set
-# CONFIG_BACKLIGHT_LV5207LP is not set
-# CONFIG_BACKLIGHT_PANDORA is not set
-# CONFIG_BACKLIGHT_PM8941_WLED is not set
-# CONFIG_BACKLIGHT_PWM is not set
-# CONFIG_BACKLIGHT_RPI is not set
-# CONFIG_BACKLIGHT_SAHARA is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-CONFIG_BASE_FULL=y
-CONFIG_BASE_SMALL=0
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_BATTERY_BQ27XXX is not set
-# CONFIG_BATTERY_BQ27XXX_HDQ is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2780 is not set
-# CONFIG_BATTERY_DS2781 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_GAUGE_LTC2941 is not set
-# CONFIG_BATTERY_GOLDFISH is not set
-# CONFIG_BATTERY_LEGO_EV3 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_BATTERY_MAX17042 is not set
-# CONFIG_BATTERY_MAX1721X is not set
-# CONFIG_BATTERY_RT5033 is not set
-# CONFIG_BATTERY_SBS is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BCACHE is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_BCM63XX_PHY is not set
-# CONFIG_BCM7038_WDT is not set
-# CONFIG_BCM7XXX_PHY is not set
-# CONFIG_BCM84881_PHY is not set
-# CONFIG_BCM87XX_PHY is not set
-# CONFIG_BCMA is not set
-# CONFIG_BCMA_DRIVER_GPIO is not set
-CONFIG_BCMA_POSSIBLE=y
-# CONFIG_BCMGENET is not set
-# CONFIG_BCM_IPROC_ADC is not set
-# CONFIG_BCM_KONA_USB2_PHY is not set
-# CONFIG_BCM_SBA_RAID is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BE2NET is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_BGMAC is not set
-# CONFIG_BH1750 is not set
-# CONFIG_BH1780 is not set
-# CONFIG_BIG_KEYS is not set
-# CONFIG_BIG_LITTLE is not set
-# CONFIG_BINARY_PRINTF is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_ELF_FDPIC is not set
-# CONFIG_BINFMT_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_BINFMT_SCRIPT=y
-CONFIG_BITREVERSE=y
-# CONFIG_BLK_CGROUP_IOCOST is not set
-# CONFIG_BLK_CGROUP_IOLATENCY is not set
-# CONFIG_BLK_CMDLINE_PARSER is not set
-# CONFIG_BLK_DEBUG_FS is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_BSGLIB is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_CS5536 is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDE_AU1XXX is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_NULL_BLK is not set
-# CONFIG_BLK_DEV_NVME is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_PMEM is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_RBD is not set
-# CONFIG_BLK_DEV_RSXX is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SKD is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_THROTTLING is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_ZONED is not set
-# CONFIG_BLK_SED_OPAL is not set
-# CONFIG_BLK_WBT is not set
-CONFIG_BLOCK=y
-# CONFIG_BMA180 is not set
-# CONFIG_BMA220 is not set
-# CONFIG_BMC150_ACCEL is not set
-# CONFIG_BMC150_MAGN is not set
-# CONFIG_BMC150_MAGN_I2C is not set
-# CONFIG_BMC150_MAGN_SPI is not set
-# CONFIG_BME680 is not set
-# CONFIG_BMG160 is not set
-# CONFIG_BMI160_I2C is not set
-# CONFIG_BMI160_SPI is not set
-# CONFIG_BMIPS_GENERIC is not set
-# CONFIG_BMP280 is not set
-# CONFIG_BNA is not set
-# CONFIG_BNX2 is not set
-# CONFIG_BNX2X is not set
-# CONFIG_BNX2X_SRIOV is not set
-# CONFIG_BNXT is not set
-# CONFIG_BONDING is not set
-# CONFIG_BOOKE_WDT is not set
-CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=3
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_BOOT_RAW=y
-CONFIG_BPF=y
-# CONFIG_BPFILTER is not set
-CONFIG_BPF_JIT=y
-# CONFIG_BPF_JIT_ALWAYS_ON is not set
-# CONFIG_BPF_STREAM_PARSER is not set
-CONFIG_BPF_SYSCALL=y
-# CONFIG_BPQETHER is not set
-CONFIG_BQL=y
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_BRCMFMAC is not set
-# CONFIG_BRCMSMAC is not set
-# CONFIG_BRCMSTB_GISB_ARB is not set
-CONFIG_BRIDGE=y
-# CONFIG_BRIDGE_EBT_802_3 is not set
-# CONFIG_BRIDGE_EBT_AMONG is not set
-# CONFIG_BRIDGE_EBT_ARP is not set
-# CONFIG_BRIDGE_EBT_ARPREPLY is not set
-# CONFIG_BRIDGE_EBT_BROUTE is not set
-# CONFIG_BRIDGE_EBT_DNAT is not set
-# CONFIG_BRIDGE_EBT_IP is not set
-# CONFIG_BRIDGE_EBT_IP6 is not set
-# CONFIG_BRIDGE_EBT_LIMIT is not set
-# CONFIG_BRIDGE_EBT_LOG is not set
-# CONFIG_BRIDGE_EBT_MARK is not set
-# CONFIG_BRIDGE_EBT_MARK_T is not set
-# CONFIG_BRIDGE_EBT_NFLOG is not set
-# CONFIG_BRIDGE_EBT_PKTTYPE is not set
-# CONFIG_BRIDGE_EBT_REDIRECT is not set
-# CONFIG_BRIDGE_EBT_SNAT is not set
-# CONFIG_BRIDGE_EBT_STP is not set
-# CONFIG_BRIDGE_EBT_T_FILTER is not set
-# CONFIG_BRIDGE_EBT_T_NAT is not set
-# CONFIG_BRIDGE_EBT_VLAN is not set
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_BRIDGE_NETFILTER is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-CONFIG_BRIDGE_VLAN_FILTERING=y
-# CONFIG_BROADCOM_PHY is not set
-CONFIG_BROKEN_ON_SMP=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_BT is not set
-# CONFIG_BTRFS_ASSERT is not set
-# CONFIG_BTRFS_DEBUG is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_BTRFS_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS_REF_VERIFY is not set
-# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
-# CONFIG_BT_ATH3K is not set
-# CONFIG_BT_BNEP is not set
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_BREDR is not set
-# CONFIG_BT_CMTP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
-# CONFIG_BT_HCIBTUSB_MTK is not set
-# CONFIG_BT_HCIBTUSB_RTL is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIUART_3WIRE is not set
-# CONFIG_BT_HCIUART_AG6XX is not set
-# CONFIG_BT_HCIUART_ATH3K is not set
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIUART_MRVL is not set
-# CONFIG_BT_HCIUART_QCA is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_HIDP is not set
-# CONFIG_BT_HS is not set
-# CONFIG_BT_LE is not set
-# CONFIG_BT_LEDS is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_BT_MTKSDIO is not set
-# CONFIG_BT_MTKUART is not set
-# CONFIG_BT_RFCOMM is not set
-CONFIG_BT_RFCOMM_TTY=y
-# CONFIG_BT_SELFTEST is not set
-CONFIG_BUG=y
-# CONFIG_BUG_ON_DATA_CORRUPTION is not set
-CONFIG_BUILDTIME_EXTABLE_SORT=y
-# CONFIG_BUILD_BIN2C is not set
-CONFIG_BUILD_SALT=""
-# CONFIG_C2PORT is not set
-CONFIG_CACHE_L2X0_PMU=y
-# CONFIG_CADENCE_WATCHDOG is not set
-# CONFIG_CAIF is not set
-# CONFIG_CAN is not set
-# CONFIG_CAN_BCM is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
-# CONFIG_CAN_DEV is not set
-# CONFIG_CAN_GS_USB is not set
-# CONFIG_CAN_GW is not set
-# CONFIG_CAN_HI311X is not set
-# CONFIG_CAN_IFI_CANFD is not set
-# CONFIG_CAN_J1939 is not set
-# CONFIG_CAN_KVASER_PCIEFD is not set
-# CONFIG_CAN_MCBA_USB is not set
-# CONFIG_CAN_M_CAN is not set
-# CONFIG_CAN_PEAK_PCIEFD is not set
-# CONFIG_CAN_RAW is not set
-# CONFIG_CAN_RCAR is not set
-# CONFIG_CAN_RCAR_CANFD is not set
-# CONFIG_CAN_SLCAN is not set
-# CONFIG_CAN_SUN4I is not set
-# CONFIG_CAN_UCAN is not set
-# CONFIG_CAN_VCAN is not set
-# CONFIG_CAN_VXCAN is not set
-# CONFIG_CAPI_AVM is not set
-# CONFIG_CAPI_EICON is not set
-# CONFIG_CAPI_TRACE is not set
-CONFIG_CARDBUS=y
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_CARL9170 is not set
-# CONFIG_CASSINI is not set
-# CONFIG_CAVIUM_CPT is not set
-# CONFIG_CAVIUM_ERRATUM_22375 is not set
-# CONFIG_CAVIUM_ERRATUM_23144 is not set
-# CONFIG_CAVIUM_ERRATUM_23154 is not set
-# CONFIG_CAVIUM_ERRATUM_27456 is not set
-# CONFIG_CAVIUM_ERRATUM_30115 is not set
-# CONFIG_CAVIUM_OCTEON_SOC is not set
-# CONFIG_CAVIUM_PTP is not set
-# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set
-# CONFIG_CB710_CORE is not set
-# CONFIG_CC10001_ADC is not set
-# CONFIG_CCS811 is not set
-CONFIG_CC_CAN_LINK=y
-CONFIG_CC_HAS_ASM_INLINE=y
-CONFIG_CC_HAS_SANCOV_TRACE_PC=y
-CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
-CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CEPH_LIB is not set
-# CONFIG_CFG80211 is not set
-# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_CHARGER_ADP5061 is not set
-# CONFIG_CHARGER_BQ2415X is not set
-# CONFIG_CHARGER_BQ24190 is not set
-# CONFIG_CHARGER_BQ24257 is not set
-# CONFIG_CHARGER_BQ24735 is not set
-# CONFIG_CHARGER_BQ25890 is not set
-# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
-# CONFIG_CHARGER_GPIO is not set
-# CONFIG_CHARGER_ISP1704 is not set
-# CONFIG_CHARGER_LP8727 is not set
-# CONFIG_CHARGER_LT3651 is not set
-# CONFIG_CHARGER_LTC3651 is not set
-# CONFIG_CHARGER_MANAGER is not set
-# CONFIG_CHARGER_MAX8903 is not set
-# CONFIG_CHARGER_RT9455 is not set
-# CONFIG_CHARGER_SBS is not set
-# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_CHARGER_TWL4030 is not set
-# CONFIG_CHARGER_UCS1002 is not set
-# CONFIG_CHASH_SELFTEST is not set
-# CONFIG_CHASH_STATS is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_CHELSIO_T4VF is not set
-# CONFIG_CHROME_PLATFORMS is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_CIFS is not set
-# CONFIG_CIFS_ACL is not set
-CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
-# CONFIG_CIFS_DEBUG is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_FSCACHE is not set
-# CONFIG_CIFS_NFSD_EXPORT is not set
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_SMB2 is not set
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_STATS2 is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-CONFIG_CIFS_XATTR=y
-# CONFIG_CIO_DAC is not set
-# CONFIG_CLEANCACHE is not set
-# CONFIG_CLKSRC_VERSATILE is not set
-# CONFIG_CLK_HSDK is not set
-# CONFIG_CLK_QORIQ is not set
-# CONFIG_CLOCK_THERMAL is not set
-CONFIG_CLS_U32_MARK=y
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CM32181 is not set
-# CONFIG_CM3232 is not set
-# CONFIG_CM3323 is not set
-# CONFIG_CM3605 is not set
-# CONFIG_CM36651 is not set
-# CONFIG_CMA is not set
-CONFIG_CMDLINE=""
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_CMDLINE_EXTEND is not set
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
-# CONFIG_CMDLINE_PARTITION is not set
-# CONFIG_CNIC is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_COMEDI is not set
-# CONFIG_COMMON_CLK_CDCE706 is not set
-# CONFIG_COMMON_CLK_CDCE925 is not set
-# CONFIG_COMMON_CLK_CS2000_CP is not set
-# CONFIG_COMMON_CLK_FIXED_MMIO is not set
-# CONFIG_COMMON_CLK_IPROC is not set
-# CONFIG_COMMON_CLK_MAX9485 is not set
-# CONFIG_COMMON_CLK_NXP is not set
-# CONFIG_COMMON_CLK_PIC32 is not set
-# CONFIG_COMMON_CLK_PWM is not set
-# CONFIG_COMMON_CLK_PXA is not set
-# CONFIG_COMMON_CLK_QCOM is not set
-# CONFIG_COMMON_CLK_SI514 is not set
-# CONFIG_COMMON_CLK_SI5341 is not set
-# CONFIG_COMMON_CLK_SI5351 is not set
-# CONFIG_COMMON_CLK_SI544 is not set
-# CONFIG_COMMON_CLK_SI570 is not set
-# CONFIG_COMMON_CLK_VC5 is not set
-# CONFIG_COMMON_CLK_VERSATILE is not set
-# CONFIG_COMMON_CLK_XGENE is not set
-# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
-CONFIG_COMPACTION=y
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_COMPAT is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_COMPILE_TEST is not set
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
-CONFIG_CONSOLE_LOGLEVEL_QUIET=4
-CONFIG_CONSTRUCTORS=y
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_COPS is not set
-# CONFIG_CORDIC is not set
-# CONFIG_COREDUMP is not set
-# CONFIG_CORESIGHT is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_CORTINA_PHY is not set
-# CONFIG_COUNTER is not set
-# CONFIG_CPA_DEBUG is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND is not set
-# CONFIG_CPU_IDLE is not set
-# CONFIG_CPU_IDLE_GOV_LADDER is not set
-# CONFIG_CPU_IDLE_GOV_MENU is not set
-# CONFIG_CPU_IDLE_GOV_TEO is not set
-# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
-# CONFIG_CPU_ISOLATION is not set
-# CONFIG_CPU_NO_EFFICIENT_FFS is not set
-CONFIG_CPU_SW_DOMAIN_PAN=y
-# CONFIG_CRAMFS is not set
-CONFIG_CRAMFS_BLOCKDEV=y
-# CONFIG_CRAMFS_MTD is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_CRC32_BIT is not set
-CONFIG_CRC32_SARWATE=y
-# CONFIG_CRC32_SELFTEST is not set
-# CONFIG_CRC32_SLICEBY4 is not set
-# CONFIG_CRC32_SLICEBY8 is not set
-# CONFIG_CRC4 is not set
-# CONFIG_CRC64 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_CRC8 is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CROSS_COMPILE=""
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_842 is not set
-# CONFIG_CRYPTO_ADIANTUM is not set
-# CONFIG_CRYPTO_AEAD is not set
-# CONFIG_CRYPTO_AEGIS128 is not set
-# CONFIG_CRYPTO_AEGIS128L is not set
-# CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2 is not set
-# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
-# CONFIG_CRYPTO_AEGIS256 is not set
-# CONFIG_CRYPTO_AEGIS256_AESNI_SSE2 is not set
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_586 is not set
-# CONFIG_CRYPTO_AES_ARM is not set
-# CONFIG_CRYPTO_AES_ARM64 is not set
-# CONFIG_CRYPTO_AES_ARM64_BS is not set
-# CONFIG_CRYPTO_AES_ARM64_CE is not set
-# CONFIG_CRYPTO_AES_ARM64_CE_BLK is not set
-# CONFIG_CRYPTO_AES_ARM64_CE_CCM is not set
-# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set
-# CONFIG_CRYPTO_AES_ARM_BS is not set
-# CONFIG_CRYPTO_AES_ARM_CE is not set
-# CONFIG_CRYPTO_AES_NI_INTEL is not set
-# CONFIG_CRYPTO_AES_TI is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_BLAKE2S is not set
-# CONFIG_CRYPTO_BLAKE2S_X86 is not set
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CFB is not set
-# CONFIG_CRYPTO_CHACHA20 is not set
-# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
-# CONFIG_CRYPTO_CHACHA20_NEON is not set
-# CONFIG_CRYPTO_CHACHA_MIPS is not set
-# CONFIG_CRYPTO_CMAC is not set
-# CONFIG_CRYPTO_CRC32 is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
-# CONFIG_CRYPTO_CRC32_ARM_CE is not set
-# CONFIG_CRYPTO_CRCT10DIF is not set
-# CONFIG_CRYPTO_CRCT10DIF_ARM64_CE is not set
-# CONFIG_CRYPTO_CRCT10DIF_ARM_CE is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_CURVE25519 is not set
-# CONFIG_CRYPTO_CURVE25519_NEON is not set
-# CONFIG_CRYPTO_CURVE25519_X86 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
-# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set
-# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
-# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
-# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
-# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
-# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
-# CONFIG_CRYPTO_DEV_CCP is not set
-# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
-# CONFIG_CRYPTO_DEV_CCREE is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_HISI_SEC is not set
-# CONFIG_CRYPTO_DEV_HISI_ZIP is not set
-# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
-# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set
-# CONFIG_CRYPTO_DEV_MV_CESA is not set
-# CONFIG_CRYPTO_DEV_MXC_SCC is not set
-# CONFIG_CRYPTO_DEV_MXS_DCP is not set
-# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
-# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
-# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
-# CONFIG_CRYPTO_DEV_QAT_C62X is not set
-# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
-# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
-# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
-# CONFIG_CRYPTO_DEV_QCE is not set
-# CONFIG_CRYPTO_DEV_S5P is not set
-# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
-# CONFIG_CRYPTO_DEV_SAHARA is not set
-# CONFIG_CRYPTO_DEV_SP_PSP is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_CRYPTO_DEV_VIRTIO is not set
-# CONFIG_CRYPTO_DH is not set
-# CONFIG_CRYPTO_DRBG_CTR is not set
-# CONFIG_CRYPTO_DRBG_HASH is not set
-# CONFIG_CRYPTO_DRBG_MENU is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_ECDH is not set
-# CONFIG_CRYPTO_ECHAINIV is not set
-# CONFIG_CRYPTO_ECRDSA is not set
-# CONFIG_CRYPTO_ESSIV is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_GHASH_ARM64_CE is not set
-# CONFIG_CRYPTO_GHASH_ARM_CE is not set
-# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
-# CONFIG_CRYPTO_HASH is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_HW is not set
-# CONFIG_CRYPTO_JITTERENTROPY is not set
-# CONFIG_CRYPTO_KEYWRAP is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-CONFIG_CRYPTO_LIB_AES=y
-CONFIG_CRYPTO_LIB_ARC4=y
-# CONFIG_CRYPTO_LIB_BLAKE2S is not set
-# CONFIG_CRYPTO_LIB_CHACHA is not set
-# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
-# CONFIG_CRYPTO_LIB_CURVE25519 is not set
-# CONFIG_CRYPTO_LIB_POLY1305 is not set
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_LZ4 is not set
-# CONFIG_CRYPTO_LZ4HC is not set
-# CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-# CONFIG_CRYPTO_MCRYPTD is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_MORUS1280 is not set
-# CONFIG_CRYPTO_MORUS1280_AVX2 is not set
-# CONFIG_CRYPTO_MORUS1280_SSE2 is not set
-# CONFIG_CRYPTO_MORUS640 is not set
-# CONFIG_CRYPTO_MORUS640_SSE2 is not set
-# CONFIG_CRYPTO_NHPOLY1305_NEON is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_OFB is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_PCOMP is not set
-# CONFIG_CRYPTO_PCOMP2 is not set
-CONFIG_CRYPTO_PCRYPT=y
-# CONFIG_CRYPTO_POLY1305 is not set
-# CONFIG_CRYPTO_POLY1305_ARM is not set
-# CONFIG_CRYPTO_POLY1305_MIPS is not set
-# CONFIG_CRYPTO_POLY1305_NEON is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_RNG is not set
-# CONFIG_CRYPTO_RSA is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SALSA20_586 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA1_ARM is not set
-# CONFIG_CRYPTO_SHA1_ARM64_CE is not set
-# CONFIG_CRYPTO_SHA1_ARM_CE is not set
-# CONFIG_CRYPTO_SHA1_ARM_NEON is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA256_ARM is not set
-# CONFIG_CRYPTO_SHA256_ARM64 is not set
-# CONFIG_CRYPTO_SHA2_ARM64_CE is not set
-# CONFIG_CRYPTO_SHA2_ARM_CE is not set
-# CONFIG_CRYPTO_SHA3 is not set
-# CONFIG_CRYPTO_SHA3_ARM64 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_SHA512_ARM is not set
-# CONFIG_CRYPTO_SHA512_ARM64 is not set
-# CONFIG_CRYPTO_SHA512_ARM64_CE is not set
-# CONFIG_CRYPTO_SIMD is not set
-# CONFIG_CRYPTO_SM3 is not set
-# CONFIG_CRYPTO_SM3_ARM64_CE is not set
-# CONFIG_CRYPTO_SM4 is not set
-# CONFIG_CRYPTO_SM4_ARM64_CE is not set
-# CONFIG_CRYPTO_SPECK is not set
-# CONFIG_CRYPTO_STATS is not set
-# CONFIG_CRYPTO_STREEBOG is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-# CONFIG_CRYPTO_TWOFISH_COMMON is not set
-# CONFIG_CRYPTO_USER is not set
-# CONFIG_CRYPTO_USER_API_AEAD is not set
-# CONFIG_CRYPTO_USER_API_HASH is not set
-# CONFIG_CRYPTO_USER_API_RNG is not set
-# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
-# CONFIG_CRYPTO_VMAC is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_XXHASH is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_ZSTD is not set
-# CONFIG_CS5535_MFGPT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_CUSE is not set
-# CONFIG_CW1200 is not set
-# CONFIG_CXL_AFU_DRIVER_OPS is not set
-# CONFIG_CXL_BASE is not set
-# CONFIG_CXL_EEH is not set
-# CONFIG_CXL_KERNEL_API is not set
-# CONFIG_CXL_LIB is not set
-# CONFIG_CYPRESS_FIRMWARE is not set
-# CONFIG_DA280 is not set
-# CONFIG_DA311 is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_DAX is not set
-# CONFIG_DCB is not set
-# CONFIG_DDR is not set
-# CONFIG_DEBUG_ALIGN_RODATA is not set
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_EFI is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_INFO_BTF is not set
-# CONFIG_DEBUG_INFO_DWARF4 is not set
-CONFIG_DEBUG_INFO_REDUCED=y
-# CONFIG_DEBUG_INFO_SPLIT is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_KOBJECT_RELEASE is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_LL_UART_8250 is not set
-# CONFIG_DEBUG_LL_UART_PL01X is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_MISC is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUG_PAGE_REF is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_DEBUG_PINCTRL is not set
-# CONFIG_DEBUG_PI_LIST is not set
-# CONFIG_DEBUG_PLIST is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RODATA_TEST is not set
-# CONFIG_DEBUG_RSEQ is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
-# CONFIG_DEBUG_SEMIHOSTING is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
-# CONFIG_DEBUG_TIMEKEEPING is not set
-# CONFIG_DEBUG_UART_8250_PALMCHIP is not set
-# CONFIG_DEBUG_UART_BCM63XX is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
-# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
-# CONFIG_DEBUG_WX is not set
-# CONFIG_DEBUG_ZBOOT is not set
-# CONFIG_DECNET is not set
-CONFIG_DEFAULT_CUBIC=y
-CONFIG_DEFAULT_DEADLINE=y
-CONFIG_DEFAULT_HOSTNAME="(none)"
-CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_DEFAULT_NOOP is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_DEFAULT_SECURITY_DAC=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
-# CONFIG_DELL_LAPTOP is not set
-# CONFIG_DELL_RBTN is not set
-# CONFIG_DELL_SMBIOS is not set
-# CONFIG_DELL_SMO8800 is not set
-# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_DEVMEM is not set
-CONFIG_DEVPORT=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_DEVTMPFS is not set
-# CONFIG_DEVTMPFS_MOUNT is not set
-# CONFIG_DEV_DAX is not set
-# CONFIG_DGAP is not set
-# CONFIG_DGNC is not set
-# CONFIG_DHT11 is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
-# CONFIG_DISPLAY_CONNECTOR_DVI is not set
-# CONFIG_DISPLAY_CONNECTOR_HDMI is not set
-# CONFIG_DISPLAY_ENCODER_TFP410 is not set
-# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set
-# CONFIG_DISPLAY_PANEL_DPI is not set
-# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
-# CONFIG_DL2K is not set
-# CONFIG_DLM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_DMABUF_SELFTESTS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_DMADEVICES_DEBUG is not set
-# CONFIG_DMARD06 is not set
-# CONFIG_DMARD09 is not set
-# CONFIG_DMARD10 is not set
-# CONFIG_DMASCC is not set
-# CONFIG_DMATEST is not set
-# CONFIG_DMA_API_DEBUG is not set
-CONFIG_DMA_DECLARE_COHERENT=y
-# CONFIG_DMA_ENGINE is not set
-# CONFIG_DMA_FENCE_TRACE is not set
-# CONFIG_DMA_JZ4780 is not set
-# CONFIG_DMA_NOOP_OPS is not set
-# CONFIG_DMA_SHARED_BUFFER is not set
-# CONFIG_DMA_VIRT_OPS is not set
-# CONFIG_DM_CACHE is not set
-# CONFIG_DM_CLONE is not set
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_DUST is not set
-# CONFIG_DM_ERA is not set
-# CONFIG_DM_FLAKEY is not set
-# CONFIG_DM_INTEGRITY is not set
-# CONFIG_DM_LOG_USERSPACE is not set
-# CONFIG_DM_LOG_WRITES is not set
-# CONFIG_DM_MQ_DEFAULT is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_RAID is not set
-# CONFIG_DM_SWITCH is not set
-# CONFIG_DM_THIN_PROVISIONING is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_DM_UNSTRIPED is not set
-# CONFIG_DM_VERITY is not set
-# CONFIG_DM_WRITECACHE is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DNET is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_DNS_RESOLVER is not set
-CONFIG_DOUBLEFAULT=y
-# CONFIG_DP83822_PHY is not set
-# CONFIG_DP83848_PHY is not set
-# CONFIG_DP83867_PHY is not set
-# CONFIG_DP83TC811_PHY is not set
-# CONFIG_DPOT_DAC is not set
-# CONFIG_DPS310 is not set
-CONFIG_DQL=y
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_DRM is not set
-# CONFIG_DRM_AMDGPU is not set
-# CONFIG_DRM_AMDGPU_CIK is not set
-# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
-# CONFIG_DRM_AMDGPU_SI is not set
-# CONFIG_DRM_AMDGPU_USERPTR is not set
-# CONFIG_DRM_AMD_ACP is not set
-# CONFIG_DRM_AMD_DC_DCN2_0 is not set
-# CONFIG_DRM_ANALOGIX_ANX78XX is not set
-# CONFIG_DRM_ARCPGU is not set
-# CONFIG_DRM_ARMADA is not set
-# CONFIG_DRM_AST is not set
-# CONFIG_DRM_BOCHS is not set
-# CONFIG_DRM_CDNS_DSI is not set
-# CONFIG_DRM_CIRRUS_QEMU is not set
-# CONFIG_DRM_DEBUG_MM is not set
-# CONFIG_DRM_DEBUG_SELFTEST is not set
-# CONFIG_DRM_DP_AUX_CHARDEV is not set
-# CONFIG_DRM_DP_CEC is not set
-# CONFIG_DRM_DUMB_VGA_DAC is not set
-# CONFIG_DRM_DW_HDMI_CEC is not set
-# CONFIG_DRM_ETNAVIV is not set
-# CONFIG_DRM_EXYNOS is not set
-# CONFIG_DRM_FBDEV_EMULATION is not set
-# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
-# CONFIG_DRM_FSL_DCU is not set
-# CONFIG_DRM_GM12U320 is not set
-# CONFIG_DRM_GMA500 is not set
-# CONFIG_DRM_HDLCD is not set
-# CONFIG_DRM_HISI_HIBMC is not set
-# CONFIG_DRM_HISI_KIRIN is not set
-# CONFIG_DRM_I2C_ADV7511 is not set
-# CONFIG_DRM_I2C_CH7006 is not set
-# CONFIG_DRM_I2C_NXP_TDA9950 is not set
-# CONFIG_DRM_I2C_NXP_TDA998X is not set
-# CONFIG_DRM_I2C_SIL164 is not set
-# CONFIG_DRM_I915 is not set
-# CONFIG_DRM_KOMEDA is not set
-# CONFIG_DRM_LEGACY is not set
-# CONFIG_DRM_LIB_RANDOM is not set
-# CONFIG_DRM_LIMA is not set
-# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
-# CONFIG_DRM_LVDS_ENCODER is not set
-# CONFIG_DRM_MALI_DISPLAY is not set
-# CONFIG_DRM_MCDE is not set
-# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
-# CONFIG_DRM_MGAG200 is not set
-# CONFIG_DRM_MXSFB is not set
-# CONFIG_DRM_NOUVEAU is not set
-# CONFIG_DRM_NXP_PTN3460 is not set
-# CONFIG_DRM_OMAP is not set
-# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
-# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set
-# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
-# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set
-# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set
-# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
-# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set
-# CONFIG_DRM_PANEL_LG_LB035Q02 is not set
-# CONFIG_DRM_PANEL_LG_LG4573 is not set
-# CONFIG_DRM_PANEL_LVDS is not set
-# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set
-# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set
-# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
-# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set
-# CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS is not set
-# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
-# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
-# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
-# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
-# CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 is not set
-# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
-# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
-# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
-# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
-# CONFIG_DRM_PANEL_SIMPLE is not set
-# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
-# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
-# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
-# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set
-# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
-# CONFIG_DRM_PANEL_TPO_TPG110 is not set
-# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
-# CONFIG_DRM_PANFROST is not set
-# CONFIG_DRM_PARADE_PS8622 is not set
-# CONFIG_DRM_PL111 is not set
-# CONFIG_DRM_QXL is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_RADEON_USERPTR is not set
-# CONFIG_DRM_RCAR_DW_HDMI is not set
-# CONFIG_DRM_RCAR_LVDS is not set
-# CONFIG_DRM_SII902X is not set
-# CONFIG_DRM_SII9234 is not set
-# CONFIG_DRM_SIL_SII8620 is not set
-# CONFIG_DRM_STI is not set
-# CONFIG_DRM_STM is not set
-# CONFIG_DRM_SUN4I is not set
-# CONFIG_DRM_THINE_THC63LVD1024 is not set
-# CONFIG_DRM_TILCDC is not set
-# CONFIG_DRM_TINYDRM is not set
-# CONFIG_DRM_TI_SN65DSI86 is not set
-# CONFIG_DRM_TI_TFP410 is not set
-# CONFIG_DRM_TOSHIBA_TC358764 is not set
-# CONFIG_DRM_TOSHIBA_TC358767 is not set
-# CONFIG_DRM_TVE200 is not set
-# CONFIG_DRM_UDL is not set
-# CONFIG_DRM_VBOXVIDEO is not set
-# CONFIG_DRM_VC4_HDMI_CEC is not set
-# CONFIG_DRM_VGEM is not set
-# CONFIG_DRM_VIRTIO_GPU is not set
-# CONFIG_DRM_VKMS is not set
-# CONFIG_DRM_VMWGFX is not set
-# CONFIG_DRM_XEN is not set
-# CONFIG_DS1682 is not set
-# CONFIG_DS1803 is not set
-# CONFIG_DS4424 is not set
-# CONFIG_DST_CACHE is not set
-# CONFIG_DTLK is not set
-# CONFIG_DUMMY is not set
-CONFIG_DUMMY_CONSOLE_COLUMNS=80
-CONFIG_DUMMY_CONSOLE_ROWS=25
-# CONFIG_DUMMY_IRQ is not set
-# CONFIG_DVB_AU8522_V4L is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_DIB0090 is not set
-# CONFIG_DWC_XLGMAC is not set
-# CONFIG_DWMAC_DWC_QOS_ETH is not set
-# CONFIG_DWMAC_IPQ806X is not set
-# CONFIG_DWMAC_LPC18XX is not set
-# CONFIG_DWMAC_MESON is not set
-# CONFIG_DWMAC_ROCKCHIP is not set
-# CONFIG_DWMAC_SOCFPGA is not set
-# CONFIG_DWMAC_STI is not set
-# CONFIG_DW_AXI_DMAC is not set
-# CONFIG_DW_DMAC is not set
-# CONFIG_DW_DMAC_PCI is not set
-# CONFIG_DW_EDMA is not set
-# CONFIG_DW_EDMA_PCIE is not set
-# CONFIG_DW_WATCHDOG is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_E100 is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_HWTS is not set
-# CONFIG_EARLY_PRINTK_8250 is not set
-# CONFIG_EARLY_PRINTK_USB_XDBC is not set
-# CONFIG_EBC_C384_WDT is not set
-# CONFIG_ECHO is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_EDAC is not set
-# CONFIG_EEEPC_LAPTOP is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_EEPROM_93XX46 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_DIGSY_MTC_CFG is not set
-# CONFIG_EEPROM_EE1004 is not set
-# CONFIG_EEPROM_IDT_89HPESX is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EFI is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_EFI_VARS_PSTORE is not set
-# CONFIG_EFS_FS is not set
-CONFIG_ELFCORE=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_EMAC_ROCKCHIP is not set
-CONFIG_EMBEDDED=y
-# CONFIG_EM_TIMER_STI is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENA_ETHERNET is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ENCRYPTED_KEYS is not set
-# CONFIG_ENCX24J600 is not set
-# CONFIG_ENERGY_MODEL is not set
-# CONFIG_ENIC is not set
-# CONFIG_ENVELOPE_DETECTOR is not set
-# CONFIG_EPAPR_PARAVIRT is not set
-# CONFIG_EPIC100 is not set
-CONFIG_EPOLL=y
-# CONFIG_EQUALIZER is not set
-# CONFIG_EROFS_FS is not set
-# CONFIG_ET131X is not set
-CONFIG_ETHERNET=y
-# CONFIG_ETHOC is not set
-CONFIG_EVENTFD=y
-# CONFIG_EVM is not set
-# CONFIG_EXFAT_DEBUG_MSG is not set
-CONFIG_EXFAT_DEFAULT_CODEPAGE=437
-# CONFIG_EXFAT_DELAYED_SYNC is not set
-CONFIG_EXFAT_DISCARD=y
-CONFIG_EXFAT_DONT_MOUNT_VFAT=y
-# CONFIG_EXFAT_FS is not set
-# CONFIG_EXFAT_KERNEL_DEBUG is not set
-CONFIG_EXPERT=y
-CONFIG_EXPORTFS=y
-# CONFIG_EXPORTFS_BLOCK_OPS is not set
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_DEBUG is not set
-# CONFIG_EXT4_ENCRYPTION is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_EXT4_USE_FOR_EXT2=y
-# CONFIG_EXTCON is not set
-# CONFIG_EXTCON_ADC_JACK is not set
-# CONFIG_EXTCON_ARIZONA is not set
-# CONFIG_EXTCON_AXP288 is not set
-# CONFIG_EXTCON_FSA9480 is not set
-# CONFIG_EXTCON_GPIO is not set
-# CONFIG_EXTCON_INTEL_INT3496 is not set
-# CONFIG_EXTCON_MAX3355 is not set
-# CONFIG_EXTCON_PTN5150 is not set
-# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
-# CONFIG_EXTCON_RT8973A is not set
-# CONFIG_EXTCON_SM5502 is not set
-# CONFIG_EXTCON_USB_GPIO is not set
-CONFIG_EXTRA_FIRMWARE=""
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_EXYNOS_ADC is not set
-# CONFIG_EXYNOS_VIDEO is not set
-# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_F2FS_CHECK_FS is not set
-# CONFIG_F2FS_FAULT_INJECTION is not set
-# CONFIG_F2FS_FS is not set
-# CONFIG_F2FS_FS_ENCRYPTION is not set
-# CONFIG_F2FS_FS_POSIX_ACL is not set
-# CONFIG_F2FS_FS_SECURITY is not set
-CONFIG_F2FS_FS_XATTR=y
-# CONFIG_F2FS_IO_TRACE is not set
-CONFIG_F2FS_STAT_FS=y
-# CONFIG_FAILOVER is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_FANOTIFY is not set
-# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_FAT_DEFAULT_UTF8 is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_FB is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_AUO_K190X is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_BIG_ENDIAN is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_BOTH_ENDIAN is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_DA8XX is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_FLEX is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_GEODE is not set
-# CONFIG_FB_GOLDFISH is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_I740 is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_IMX is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_LITTLE_ENDIAN is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_MXS is not set
-# CONFIG_FB_N411 is not set
-# CONFIG_FB_NEOMAGIC is not set
-CONFIG_FB_NOTIFY=y
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_OMAP2 is not set
-# CONFIG_FB_OPENCORES is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_PS3 is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIMPLE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_SM712 is not set
-# CONFIG_FB_SM750 is not set
-# CONFIG_FB_SMSCUFX is not set
-# CONFIG_FB_SSD1307 is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_TFT is not set
-# CONFIG_FB_TFT_AGM1264K_FL is not set
-# CONFIG_FB_TFT_BD663474 is not set
-# CONFIG_FB_TFT_FBTFT_DEVICE is not set
-# CONFIG_FB_TFT_HX8340BN is not set
-# CONFIG_FB_TFT_HX8347D is not set
-# CONFIG_FB_TFT_HX8353D is not set
-# CONFIG_FB_TFT_HX8357D is not set
-# CONFIG_FB_TFT_ILI9163 is not set
-# CONFIG_FB_TFT_ILI9320 is not set
-# CONFIG_FB_TFT_ILI9325 is not set
-# CONFIG_FB_TFT_ILI9340 is not set
-# CONFIG_FB_TFT_ILI9341 is not set
-# CONFIG_FB_TFT_ILI9481 is not set
-# CONFIG_FB_TFT_ILI9486 is not set
-# CONFIG_FB_TFT_PCD8544 is not set
-# CONFIG_FB_TFT_RA8875 is not set
-# CONFIG_FB_TFT_S6D02A1 is not set
-# CONFIG_FB_TFT_S6D1121 is not set
-# CONFIG_FB_TFT_SH1106 is not set
-# CONFIG_FB_TFT_SSD1289 is not set
-# CONFIG_FB_TFT_SSD1305 is not set
-# CONFIG_FB_TFT_SSD1306 is not set
-# CONFIG_FB_TFT_SSD1325 is not set
-# CONFIG_FB_TFT_SSD1331 is not set
-# CONFIG_FB_TFT_SSD1351 is not set
-# CONFIG_FB_TFT_ST7735R is not set
-# CONFIG_FB_TFT_ST7789V is not set
-# CONFIG_FB_TFT_TINYLCD is not set
-# CONFIG_FB_TFT_TLS8204 is not set
-# CONFIG_FB_TFT_UC1611 is not set
-# CONFIG_FB_TFT_UC1701 is not set
-# CONFIG_FB_TFT_UPD161704 is not set
-# CONFIG_FB_TFT_WATTEROTT is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_UDL is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_XGI is not set
-# CONFIG_FCOE is not set
-# CONFIG_FCOE_FNIC is not set
-# CONFIG_FDDI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_FENCE_TRACE is not set
-# CONFIG_FHANDLE is not set
-CONFIG_FIB_RULES=y
-# CONFIG_FIELDBUS_DEV is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FIND_BIT_BENCHMARK is not set
-# CONFIG_FIREWIRE is not set
-# CONFIG_FIREWIRE_NOSY is not set
-# CONFIG_FIREWIRE_SERIAL is not set
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_FIT_PARTITION is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_FLATMEM=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_FM10K is not set
-# CONFIG_FMC is not set
-# CONFIG_FONTS is not set
-# CONFIG_FONT_TER16x32 is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_FORTIFY_SOURCE=y
-# CONFIG_FPGA is not set
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
-# CONFIG_FRAME_POINTER is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_FREEZER is not set
-# CONFIG_FRONTSWAP is not set
-# CONFIG_FSCACHE is not set
-# CONFIG_FSI is not set
-# CONFIG_FSL_EDMA is not set
-# CONFIG_FSL_ERRATUM_A008585 is not set
-# CONFIG_FSL_MC_BUS is not set
-# CONFIG_FSL_PQ_MDIO is not set
-# CONFIG_FSL_QDMA is not set
-# CONFIG_FSL_XGMAC_MDIO is not set
-CONFIG_FSNOTIFY=y
-# CONFIG_FS_DAX is not set
-# CONFIG_FS_ENCRYPTION is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FS_VERITY is not set
-# CONFIG_FTGMAC100 is not set
-# CONFIG_FTL is not set
-# CONFIG_FTMAC100 is not set
-# CONFIG_FTRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_FTWDT010_WATCHDOG is not set
-# CONFIG_FUJITSU_ERRATUM_010001 is not set
-# CONFIG_FUJITSU_ES is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_FUJITSU_TABLET is not set
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_FUSE_FS is not set
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-# CONFIG_FUSION_SPI is not set
-CONFIG_FUTEX=y
-CONFIG_FUTEX_PI=y
-# CONFIG_FW_CFG_SYSFS is not set
-CONFIG_FW_LOADER=y
-# CONFIG_FW_LOADER_COMPRESS is not set
-CONFIG_FW_LOADER_USER_HELPER=y
-CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
-# CONFIG_FXAS21002C is not set
-# CONFIG_FXOS8700_I2C is not set
-# CONFIG_FXOS8700_SPI is not set
-CONFIG_GACT_PROB=y
-# CONFIG_GADGET_UAC1 is not set
-# CONFIG_GAMEPORT is not set
-# CONFIG_GATEWORKS_GW16083 is not set
-# CONFIG_GCC_PLUGINS is not set
-# CONFIG_GCOV is not set
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_GDB_SCRIPTS is not set
-# CONFIG_GEMINI_ETHERNET is not set
-# CONFIG_GENERIC_ADC_BATTERY is not set
-# CONFIG_GENERIC_ADC_THERMAL is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_CPU_DEVICES is not set
-CONFIG_GENERIC_HWEIGHT=y
-# CONFIG_GENERIC_IRQ_DEBUGFS is not set
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_NET_UTILS=y
-# CONFIG_GENERIC_PHY is not set
-# CONFIG_GENEVE is not set
-# CONFIG_GENWQE is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_GIGASET_CAPI is not set
-# CONFIG_GIGASET_DEBUG is not set
-# CONFIG_GIGASET_DUMMYLL is not set
-# CONFIG_GLOB_SELFTEST is not set
-# CONFIG_GNSS is not set
-# CONFIG_GOLDFISH is not set
-# CONFIG_GOOGLE_FIRMWARE is not set
-# CONFIG_GP2AP020A00F is not set
-# CONFIG_GPD_POCKET_FAN is not set
-# CONFIG_GPIOLIB is not set
-CONFIG_GPIOLIB_FASTPATH_LIMIT=512
-# CONFIG_GPIO_104_DIO_48E is not set
-# CONFIG_GPIO_104_IDIO_16 is not set
-# CONFIG_GPIO_104_IDI_48 is not set
-# CONFIG_GPIO_74X164 is not set
-# CONFIG_GPIO_74XX_MMIO is not set
-# CONFIG_GPIO_ADNP is not set
-# CONFIG_GPIO_ADP5588 is not set
-# CONFIG_GPIO_ALTERA is not set
-# CONFIG_GPIO_AMD8111 is not set
-# CONFIG_GPIO_AMDPT is not set
-# CONFIG_GPIO_AMD_FCH is not set
-# CONFIG_GPIO_BCM_KONA is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_CADENCE is not set
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_DWAPB is not set
-# CONFIG_GPIO_EM is not set
-# CONFIG_GPIO_EXAR is not set
-# CONFIG_GPIO_F7188X is not set
-# CONFIG_GPIO_FTGPIO010 is not set
-# CONFIG_GPIO_GENERIC_PLATFORM is not set
-# CONFIG_GPIO_GPIO_MM is not set
-# CONFIG_GPIO_GRGPIO is not set
-# CONFIG_GPIO_GW_PLD is not set
-# CONFIG_GPIO_HLWD is not set
-# CONFIG_GPIO_ICH is not set
-# CONFIG_GPIO_IT87 is not set
-# CONFIG_GPIO_LYNXPOINT is not set
-# CONFIG_GPIO_MAX3191X is not set
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_MB86S7X is not set
-# CONFIG_GPIO_MC33880 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_ML_IOH is not set
-# CONFIG_GPIO_MOCKUP is not set
-# CONFIG_GPIO_MPC8XXX is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_PCH is not set
-# CONFIG_GPIO_PCIE_IDIO_24 is not set
-# CONFIG_GPIO_PCI_IDIO_16 is not set
-# CONFIG_GPIO_PISOSR is not set
-# CONFIG_GPIO_PL061 is not set
-# CONFIG_GPIO_RCAR is not set
-# CONFIG_GPIO_RDC321X is not set
-# CONFIG_GPIO_SAMA5D2_PIOBU is not set
-# CONFIG_GPIO_SCH is not set
-# CONFIG_GPIO_SCH311X is not set
-# CONFIG_GPIO_SX150X is not set
-# CONFIG_GPIO_SYSCON is not set
-CONFIG_GPIO_SYSFS=y
-# CONFIG_GPIO_TPIC2810 is not set
-# CONFIG_GPIO_TS4900 is not set
-# CONFIG_GPIO_TS5500 is not set
-# CONFIG_GPIO_VX855 is not set
-# CONFIG_GPIO_WATCHDOG is not set
-# CONFIG_GPIO_WINBOND is not set
-# CONFIG_GPIO_WS16C48 is not set
-# CONFIG_GPIO_XGENE is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_XRA1403 is not set
-# CONFIG_GPIO_ZEVIO is not set
-# CONFIG_GPIO_ZX is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_GREYBUS is not set
-# CONFIG_GS_FPGABOOT is not set
-# CONFIG_GTP is not set
-# CONFIG_GUP_BENCHMARK is not set
-# CONFIG_GVE is not set
-# CONFIG_HABANA_AI is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_HAPPYMEAL is not set
-CONFIG_HARDENED_USERCOPY=y
-# CONFIG_HARDENED_USERCOPY_FALLBACK is not set
-# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
-CONFIG_HARDEN_EL2_VECTORS=y
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
-# CONFIG_HAVE_ARCH_HASH is not set
-CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
-# CONFIG_HAVE_ARCH_VMAP_STACK is not set
-CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
-# CONFIG_HAVE_ARM_ARCH_TIMER is not set
-CONFIG_HAVE_EXIT_THREAD=y
-CONFIG_HAVE_GCC_PLUGINS=y
-CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_CAT=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_NMI=y
-CONFIG_HAVE_STACKPROTECTOR=y
-# CONFIG_HCALL_STATS is not set
-# CONFIG_HDC100X is not set
-# CONFIG_HDLC is not set
-# CONFIG_HDLC_CISCO is not set
-# CONFIG_HDLC_FR is not set
-# CONFIG_HDLC_PPP is not set
-# CONFIG_HDLC_RAW is not set
-# CONFIG_HDLC_RAW_ETH is not set
-# CONFIG_HDMI_LPE_AUDIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_HEADERS_INSTALL is not set
-# CONFIG_HEADER_TEST is not set
-# CONFIG_HERMES is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFS_FS_POSIX_ACL is not set
-# CONFIG_HI8435 is not set
-# CONFIG_HIBERNATION is not set
-# CONFIG_HID is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_ACCUTOUCH is not set
-# CONFIG_HID_ACRUX is not set
-# CONFIG_HID_ACRUX_FF is not set
-# CONFIG_HID_ALPS is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_APPLEIR is not set
-# CONFIG_HID_ASUS is not set
-# CONFIG_HID_AUREAL is not set
-# CONFIG_HID_BATTERY_STRENGTH is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_BETOP_FF is not set
-# CONFIG_HID_BIGBEN_FF is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CMEDIA is not set
-# CONFIG_HID_CORSAIR is not set
-# CONFIG_HID_COUGAR is not set
-# CONFIG_HID_CP2112 is not set
-# CONFIG_HID_CREATIVE_SB0540 is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_ELAN is not set
-# CONFIG_HID_ELECOM is not set
-# CONFIG_HID_ELO is not set
-# CONFIG_HID_EMS_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_GEMBIRD is not set
-# CONFIG_HID_GENERIC is not set
-# CONFIG_HID_GFRM is not set
-# CONFIG_HID_GOOGLE_HAMMER is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_GT683R is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_HOLTEK is not set
-# CONFIG_HID_ICADE is not set
-# CONFIG_HID_ITE is not set
-# CONFIG_HID_JABRA is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_KEYTOUCH is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_LCPOWER is not set
-# CONFIG_HID_LED is not set
-# CONFIG_HID_LENOVO is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_LOGITECH_DJ is not set
-# CONFIG_HID_LOGITECH_HIDPP is not set
-# CONFIG_HID_MACALLY is not set
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_MALTRON is not set
-# CONFIG_HID_MAYFLASH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_MULTITOUCH is not set
-# CONFIG_HID_NTI is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PENMOUNT is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_PID is not set
-# CONFIG_HID_PLANTRONICS is not set
-# CONFIG_HID_PRIMAX is not set
-# CONFIG_HID_PRODIKEYS is not set
-# CONFIG_HID_REDRAGON is not set
-# CONFIG_HID_RETRODE is not set
-# CONFIG_HID_RMI is not set
-# CONFIG_HID_ROCCAT is not set
-# CONFIG_HID_SAITEK is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SENSOR_HUB is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SPEEDLINK is not set
-# CONFIG_HID_STEAM is not set
-# CONFIG_HID_STEELSERIES is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_THINGM is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_TIVO is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_U2FZERO is not set
-# CONFIG_HID_UCLOGIC is not set
-# CONFIG_HID_UDRAW_PS3 is not set
-# CONFIG_HID_VIEWSONIC is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_WALTOP is not set
-# CONFIG_HID_WIIMOTE is not set
-# CONFIG_HID_XINMO is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HID_ZYDACRON is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HIGH_RES_TIMERS=y
-# CONFIG_HINIC is not set
-# CONFIG_HIP04_ETH is not set
-# CONFIG_HIPPI is not set
-# CONFIG_HISILICON_ERRATUM_161010101 is not set
-# CONFIG_HISILICON_ERRATUM_161600802 is not set
-# CONFIG_HISI_FEMAC is not set
-# CONFIG_HIX5HD2_GMAC is not set
-# CONFIG_HMC6352 is not set
-# CONFIG_HNS is not set
-# CONFIG_HNS3 is not set
-# CONFIG_HNS_DSAF is not set
-# CONFIG_HNS_ENET is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HOSTAP_CS is not set
-# CONFIG_HOSTAP_PCI is not set
-# CONFIG_HOSTAP_PLX is not set
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HP03 is not set
-# CONFIG_HP100 is not set
-# CONFIG_HP206C is not set
-CONFIG_HPET_MMAP_DEFAULT=y
-# CONFIG_HPFS_FS is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_HP_WIRELESS is not set
-# CONFIG_HSA_AMD is not set
-# CONFIG_HSI is not set
-# CONFIG_HSR is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTS221 is not set
-# CONFIG_HTU21 is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_HVC_DCC is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_HWLAT_TRACER is not set
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWSPINLOCK is not set
-# CONFIG_HWSPINLOCK_OMAP is not set
-CONFIG_HW_PERF_EVENTS=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HW_RANDOM_AMD is not set
-# CONFIG_HW_RANDOM_ATMEL is not set
-# CONFIG_HW_RANDOM_CAVIUM is not set
-# CONFIG_HW_RANDOM_EXYNOS is not set
-# CONFIG_HW_RANDOM_GEODE is not set
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_IPROC_RNG200 is not set
-# CONFIG_HW_RANDOM_OMAP is not set
-# CONFIG_HW_RANDOM_OMAP3_ROM is not set
-# CONFIG_HW_RANDOM_PPC4XX is not set
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_HW_RANDOM_TPM=y
-# CONFIG_HW_RANDOM_VIA is not set
-# CONFIG_HW_RANDOM_VIRTIO is not set
-# CONFIG_HX711 is not set
-# CONFIG_HYPERV is not set
-# CONFIG_HYPERV_TSCPAGE is not set
-# CONFIG_HYSDN is not set
-CONFIG_HZ=100
-CONFIG_HZ_100=y
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_200 is not set
-# CONFIG_HZ_24 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_500 is not set
-# CONFIG_HZ_PERIODIC is not set
-# CONFIG_I2C is not set
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCA is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
-# CONFIG_I2C_AU1550 is not set
-# CONFIG_I2C_BCM2835 is not set
-# CONFIG_I2C_BCM_IPROC is not set
-# CONFIG_I2C_CADENCE is not set
-# CONFIG_I2C_CBUS_GPIO is not set
-# CONFIG_I2C_CHARDEV is not set
-# CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEMUX_PINCTRL is not set
-# CONFIG_I2C_DESIGNWARE_PCI is not set
-# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
-# CONFIG_I2C_DESIGNWARE_SLAVE is not set
-# CONFIG_I2C_DIOLAN_U2C is not set
-# CONFIG_I2C_EG20T is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_EMEV2 is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_HID is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_IMG is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_ISMT is not set
-# CONFIG_I2C_JZ4780 is not set
-# CONFIG_I2C_MLXCPLD is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_MUX is not set
-# CONFIG_I2C_MUX_GPIO is not set
-# CONFIG_I2C_MUX_GPMUX is not set
-# CONFIG_I2C_MUX_LTC4306 is not set
-# CONFIG_I2C_MUX_MLXCPLD is not set
-# CONFIG_I2C_MUX_PCA9541 is not set
-# CONFIG_I2C_MUX_PCA954x is not set
-# CONFIG_I2C_MUX_PINCTRL is not set
-# CONFIG_I2C_MUX_REG is not set
-# CONFIG_I2C_MV64XXX is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_NOMADIK is not set
-# CONFIG_I2C_NVIDIA_GPU is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OCTEON is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PXA_PCI is not set
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_RCAR is not set
-# CONFIG_I2C_RK3X is not set
-# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
-# CONFIG_I2C_S3C2410 is not set
-# CONFIG_I2C_SCMI is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_SLAVE is not set
-# CONFIG_I2C_SLAVE_EEPROM is not set
-# CONFIG_I2C_SMBUS is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_THUNDERX is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VERSATILE is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_XILINX is not set
-# CONFIG_I3C is not set
-# CONFIG_I40E is not set
-# CONFIG_I40EVF is not set
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_IAQCORE is not set
-# CONFIG_IBM_ASM is not set
-# CONFIG_IBM_EMAC_DEBUG is not set
-# CONFIG_IBM_EMAC_EMAC4 is not set
-# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_EMAC_RGMII is not set
-# CONFIG_IBM_EMAC_TAH is not set
-# CONFIG_IBM_EMAC_ZMII is not set
-# CONFIG_ICE is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_IDE is not set
-# CONFIG_IDEAPAD_LAPTOP is not set
-# CONFIG_IDE_GD is not set
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDLE_PAGE_TRACKING is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_IEEE802154_ADF7242 is not set
-# CONFIG_IEEE802154_ATUSB is not set
-# CONFIG_IEEE802154_CA8210 is not set
-# CONFIG_IEEE802154_HWSIM is not set
-# CONFIG_IEEE802154_MCR20A is not set
-# CONFIG_IFB is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_IGC is not set
-# CONFIG_IIO is not set
-# CONFIG_IIO_BUFFER is not set
-# CONFIG_IIO_BUFFER_CB is not set
-# CONFIG_IIO_BUFFER_HW_CONSUMER is not set
-# CONFIG_IIO_CONFIGFS is not set
-CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
-# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set
-# CONFIG_IIO_INTERRUPT_TRIGGER is not set
-# CONFIG_IIO_MUX is not set
-# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
-# CONFIG_IIO_RESCALE is not set
-# CONFIG_IIO_SIMPLE_DUMMY is not set
-# CONFIG_IIO_SSP_SENSORHUB is not set
-# CONFIG_IIO_ST_ACCEL_3AXIS is not set
-# CONFIG_IIO_ST_GYRO_3AXIS is not set
-# CONFIG_IIO_ST_LSM6DSX is not set
-# CONFIG_IIO_ST_MAGN_3AXIS is not set
-# CONFIG_IIO_ST_PRESS is not set
-# CONFIG_IIO_SW_DEVICE is not set
-# CONFIG_IIO_SW_TRIGGER is not set
-# CONFIG_IIO_SYSFS_TRIGGER is not set
-# CONFIG_IIO_TRIGGER is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_IKCONFIG_PROC is not set
-# CONFIG_IKHEADERS is not set
-# CONFIG_IMA is not set
-# CONFIG_IMAGE_CMDLINE_HACK is not set
-# CONFIG_IMGPDC_WDT is not set
-# CONFIG_IMG_MDC_DMA is not set
-# CONFIG_IMX7D_ADC is not set
-# CONFIG_IMX_IPUV3_CORE is not set
-# CONFIG_IMX_THERMAL is not set
-# CONFIG_INA2XX_ADC is not set
-# CONFIG_INDIRECT_PIO is not set
-CONFIG_INET=y
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_TCP_DIAG is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_UDP_DIAG is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_INFTL is not set
-# CONFIG_INGENIC_ADC is not set
-# CONFIG_INGENIC_CGU_JZ4725B is not set
-# CONFIG_INGENIC_CGU_JZ4740 is not set
-# CONFIG_INGENIC_CGU_JZ4770 is not set
-# CONFIG_INGENIC_CGU_JZ4780 is not set
-# CONFIG_INGENIC_TCU_CLK is not set
-# CONFIG_INGENIC_TCU_IRQ is not set
-# CONFIG_INGENIC_TIMER is not set
-CONFIG_INIT_ENV_ARG_LIMIT=32
-# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
-# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
-CONFIG_INIT_STACK_NONE=y
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_APANEL is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_ATLAS_BTNS is not set
-# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
-# CONFIG_INPUT_AXP20X_PEK is not set
-# CONFIG_INPUT_BMA150 is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_CMA3000 is not set
-# CONFIG_INPUT_DRV260X_HAPTICS is not set
-# CONFIG_INPUT_DRV2665_HAPTICS is not set
-# CONFIG_INPUT_DRV2667_HAPTICS is not set
-# CONFIG_INPUT_E3X0_BUTTON is not set
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_BEEPER is not set
-# CONFIG_INPUT_GPIO_DECODER is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-# CONFIG_INPUT_GPIO_VIBRA is not set
-# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
-# CONFIG_INPUT_IMS_PCU is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_KXTJ9 is not set
-# CONFIG_INPUT_LEDS is not set
-# CONFIG_INPUT_MATRIXKMAP is not set
-# CONFIG_INPUT_MAX8997_HAPTIC is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_MMA8450 is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_MPU3050 is not set
-# CONFIG_INPUT_MSM_VIBRATOR is not set
-# CONFIG_INPUT_PALMAS_PWRBUTTON is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_PWM_BEEPER is not set
-# CONFIG_INPUT_PWM_VIBRA is not set
-# CONFIG_INPUT_REGULATOR_HAPTIC is not set
-# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_TPS65218_PWRBUTTON is not set
-# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
-# CONFIG_INPUT_TWL4030_VIBRA is not set
-# CONFIG_INPUT_TWL6040_VIBRA is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_WISTRON_BTNS is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INT340X_THERMAL is not set
-# CONFIG_INTEGRITY is not set
-# CONFIG_INTEGRITY_AUDIT is not set
-# CONFIG_INTEGRITY_SIGNATURE is not set
-# CONFIG_INTEL_ATOMISP2_PM is not set
-# CONFIG_INTEL_CHT_INT33FE is not set
-# CONFIG_INTEL_HID_EVENT is not set
-# CONFIG_INTEL_IDLE is not set
-# CONFIG_INTEL_IDMA64 is not set
-# CONFIG_INTEL_IOATDMA is not set
-# CONFIG_INTEL_ISH_HID is not set
-# CONFIG_INTEL_MEI is not set
-# CONFIG_INTEL_MEI_ME is not set
-# CONFIG_INTEL_MEI_TXE is not set
-# CONFIG_INTEL_MIC_CARD is not set
-# CONFIG_INTEL_MIC_HOST is not set
-# CONFIG_INTEL_MID_PTI is not set
-# CONFIG_INTEL_OAKTRAIL is not set
-# CONFIG_INTEL_PMC_CORE is not set
-# CONFIG_INTEL_PUNIT_IPC is not set
-# CONFIG_INTEL_RST is not set
-# CONFIG_INTEL_SMARTCONNECT is not set
-# CONFIG_INTEL_SOC_PMIC is not set
-# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
-# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
-# CONFIG_INTEL_TH is not set
-# CONFIG_INTEL_VBTN is not set
-# CONFIG_INTEL_XWAY_PHY is not set
-# CONFIG_INTERCONNECT is not set
-# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_INV_MPU6050_I2C is not set
-# CONFIG_INV_MPU6050_IIO is not set
-# CONFIG_INV_MPU6050_SPI is not set
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_IONIC is not set
-# CONFIG_IOSCHED_BFQ is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IO_STRICT_DEVMEM=y
-# CONFIG_IO_URING is not set
-# CONFIG_IP17XX_PHY is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_RPFILTER is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_SRH is not set
-# CONFIG_IP6_NF_NAT is not set
-# CONFIG_IP6_NF_RAW is not set
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
-# CONFIG_IPACK_BUS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_IPMB_DEVICE_INTERFACE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPV6 is not set
-# CONFIG_IPV6_FOU is not set
-# CONFIG_IPV6_FOU_TUNNEL is not set
-# CONFIG_IPV6_ILA is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_SEG6_HMAC is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_SIT_6RD is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_VTI is not set
-# CONFIG_IPVLAN is not set
-# CONFIG_IPVTAP is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2200 is not set
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_IPW2200_MONITOR=y
-# CONFIG_IPW2200_PROMISCUOUS is not set
-# CONFIG_IPW2200_QOS is not set
-# CONFIG_IPW2200_RADIOTAP is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_IPX is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_FIB_TRIE_STATS is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_RPFILTER is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_SYNPROXY is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_IP_PNP is not set
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_IP_SET is not set
-# CONFIG_IP_SET_HASH_IPMAC is not set
-# CONFIG_IP_VS is not set
-# CONFIG_IP_VS_MH is not set
-CONFIG_IP_VS_MH_TAB_INDEX=10
-# CONFIG_IRDA is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_IRQ_ALL_CPUS is not set
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-# CONFIG_IRQ_POLL is not set
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-# CONFIG_IR_GPIO_CIR is not set
-# CONFIG_IR_HIX5HD2 is not set
-# CONFIG_IR_IGORPLUGUSB is not set
-# CONFIG_IR_IGUANA is not set
-# CONFIG_IR_IMG is not set
-# CONFIG_IR_IMON is not set
-# CONFIG_IR_JVC_DECODER is not set
-# CONFIG_IR_LIRC_CODEC is not set
-# CONFIG_IR_MCEUSB is not set
-# CONFIG_IR_NEC_DECODER is not set
-# CONFIG_IR_RC5_DECODER is not set
-# CONFIG_IR_RC6_DECODER is not set
-# CONFIG_IR_REDRAT3 is not set
-# CONFIG_IR_SONY_DECODER is not set
-# CONFIG_IR_STREAMZAP is not set
-# CONFIG_IR_TTUSBIR is not set
-# CONFIG_ISA_BUS is not set
-# CONFIG_ISA_BUS_API is not set
-# CONFIG_ISCSI_BOOT_SYSFS is not set
-# CONFIG_ISCSI_TCP is not set
-CONFIG_ISDN=y
-# CONFIG_ISDN_AUDIO is not set
-# CONFIG_ISDN_CAPI is not set
-# CONFIG_ISDN_CAPI_CAPIDRV is not set
-# CONFIG_ISDN_DIVERSION is not set
-# CONFIG_ISDN_DRV_ACT2000 is not set
-# CONFIG_ISDN_DRV_GIGASET is not set
-# CONFIG_ISDN_DRV_HISAX is not set
-# CONFIG_ISDN_DRV_ICN is not set
-# CONFIG_ISDN_DRV_LOOP is not set
-# CONFIG_ISDN_DRV_PCBIT is not set
-# CONFIG_ISDN_DRV_SC is not set
-# CONFIG_ISDN_I4L is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_ISL29020 is not set
-# CONFIG_ISL29125 is not set
-# CONFIG_ISL29501 is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_ISS4xx is not set
-# CONFIG_ITG3200 is not set
-# CONFIG_IWL3945 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IXGB is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGBEVF is not set
-# CONFIG_JAILHOUSE_GUEST is not set
-# CONFIG_JBD2_DEBUG is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_POSIX_ACL is not set
-# CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_LZMA=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_ZLIB is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_JME is not set
-CONFIG_JOLIET=y
-# CONFIG_JSA1212 is not set
-# CONFIG_JUMP_LABEL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_KALLSYMS_BASE_RELATIVE=y
-# CONFIG_KALLSYMS_UNCOMPRESSED is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_KASAN is not set
-CONFIG_KASAN_STACK=1
-# CONFIG_KCOV is not set
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_CAT is not set
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_LZ4 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_KERNEL_MODE_NEON=y
-CONFIG_KERNEL_XZ=y
-CONFIG_KERNFS=y
-# CONFIG_KEXEC is not set
-# CONFIG_KEXEC_FILE is not set
-# CONFIG_KEXEC_SIG is not set
-# CONFIG_KEYBOARD_ADC is not set
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ADP5589 is not set
-# CONFIG_KEYBOARD_APPLESPI is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_BCM is not set
-# CONFIG_KEYBOARD_CAP11XX is not set
-# CONFIG_KEYBOARD_DLINK_DIR685 is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_GPIO_POLLED is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_LM8333 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_MPR121 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OMAP4 is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_QT1050 is not set
-# CONFIG_KEYBOARD_QT1070 is not set
-# CONFIG_KEYBOARD_QT2160 is not set
-# CONFIG_KEYBOARD_SAMSUNG is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
-# CONFIG_KEYBOARD_STMPE is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_TCA8418 is not set
-# CONFIG_KEYBOARD_TEGRA is not set
-# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
-# CONFIG_KEYBOARD_TWL4030 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYS is not set
-# CONFIG_KEYS_REQUEST_CACHE is not set
-# CONFIG_KEY_DH_OPERATIONS is not set
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-# CONFIG_KMX61 is not set
-# CONFIG_KPC2000 is not set
-# CONFIG_KPROBES is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_KS7010 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_KSM is not set
-# CONFIG_KSZ884X_PCI is not set
-CONFIG_KUSER_HELPERS=y
-# CONFIG_KVM_AMD is not set
-# CONFIG_KVM_AMD_SEV is not set
-# CONFIG_KVM_GUEST is not set
-# CONFIG_KVM_INTEL is not set
-# CONFIG_KXCJK1013 is not set
-# CONFIG_KXSD9 is not set
-# CONFIG_L2TP is not set
-# CONFIG_L2TP_ETH is not set
-# CONFIG_L2TP_IP is not set
-# CONFIG_L2TP_V3 is not set
-# CONFIG_LAN743X is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_LANTIQ is not set
-# CONFIG_LAPB is not set
-# CONFIG_LASAT is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_LATTICE_ECP3_CONFIG is not set
-CONFIG_LBDAF=y
-# CONFIG_LCD_AMS369FG06 is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
-# CONFIG_LCD_HX8357 is not set
-# CONFIG_LCD_ILI922X is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LD9040 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LMS501KF03 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_OTM3225A is not set
-# CONFIG_LCD_S6E63M0 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-CONFIG_LDISC_AUTOLOAD=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y
-# CONFIG_LEDS_AN30259A is not set
-# CONFIG_LEDS_APU is not set
-# CONFIG_LEDS_BCM6328 is not set
-# CONFIG_LEDS_BCM6358 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_BLINKM is not set
-CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
-CONFIG_LEDS_CLASS=y
-# CONFIG_LEDS_CLASS_FLASH is not set
-# CONFIG_LEDS_CR0014114 is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_INTEL_SS4200 is not set
-# CONFIG_LEDS_IS31FL319X is not set
-# CONFIG_LEDS_IS31FL32XX is not set
-# CONFIG_LEDS_LM3530 is not set
-# CONFIG_LEDS_LM3532 is not set
-# CONFIG_LEDS_LM355x is not set
-# CONFIG_LEDS_LM3642 is not set
-# CONFIG_LEDS_LM3692X is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_LP3952 is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_LP5523 is not set
-# CONFIG_LEDS_LP5562 is not set
-# CONFIG_LEDS_LP8501 is not set
-# CONFIG_LEDS_LP8860 is not set
-# CONFIG_LEDS_LT3593 is not set
-# CONFIG_LEDS_MLXCPLD is not set
-# CONFIG_LEDS_MLXREG is not set
-# CONFIG_LEDS_NIC78BX is not set
-# CONFIG_LEDS_NS2 is not set
-# CONFIG_LEDS_OT200 is not set
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_PCA963X is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_SPI_BYTE is not set
-# CONFIG_LEDS_SYSCON is not set
-# CONFIG_LEDS_TCA6507 is not set
-# CONFIG_LEDS_TI_LMU_COMMON is not set
-# CONFIG_LEDS_TLC591XX is not set
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
-# CONFIG_LEDS_TRIGGER_AUDIO is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_CAMERA is not set
-# CONFIG_LEDS_TRIGGER_CPU is not set
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-# CONFIG_LEDS_TRIGGER_DISK is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_MTD is not set
-CONFIG_LEDS_TRIGGER_NETDEV=y
-# CONFIG_LEDS_TRIGGER_ONESHOT is not set
-# CONFIG_LEDS_TRIGGER_PANIC is not set
-# CONFIG_LEDS_TRIGGER_PATTERN is not set
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
-# CONFIG_LEDS_USER is not set
-# CONFIG_LED_TRIGGER_PHY is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_LGUEST is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_LIB80211_CRYPT_CCMP is not set
-# CONFIG_LIB80211_CRYPT_TKIP is not set
-# CONFIG_LIB80211_CRYPT_WEP is not set
-# CONFIG_LIB80211_DEBUG is not set
-# CONFIG_LIBCRC32C is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_LIBIPW_DEBUG is not set
-# CONFIG_LIBNVDIMM is not set
-# CONFIG_LIDAR_LITE_V2 is not set
-# CONFIG_LIQUIDIO is not set
-# CONFIG_LIQUIDIO_VF is not set
-# CONFIG_LIS3L02DQ is not set
-# CONFIG_LKDTM is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_LMP91000 is not set
-# CONFIG_LNET is not set
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_LOCKD is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_LOCKD_V4=y
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_LOCK_EVENT_COUNTS is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_LOCK_TORTURE_TEST is not set
-# CONFIG_LOGFS is not set
-# CONFIG_LOGIG940_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIWHEELS_FF is not set
-# CONFIG_LOGO is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
-# CONFIG_LOONGSON_MC146818 is not set
-# CONFIG_LPC_ICH is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity"
-CONFIG_LSM_MMAP_MIN_ADDR=65536
-# CONFIG_LTC1660 is not set
-# CONFIG_LTC2471 is not set
-# CONFIG_LTC2485 is not set
-# CONFIG_LTC2497 is not set
-# CONFIG_LTC2632 is not set
-# CONFIG_LTE_GDM724X is not set
-# CONFIG_LTPC is not set
-# CONFIG_LTR501 is not set
-# CONFIG_LUSTRE_FS is not set
-# CONFIG_LV0104CS is not set
-# CONFIG_LWTUNNEL is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_LZ4HC_COMPRESS is not set
-# CONFIG_LZ4_COMPRESS is not set
-# CONFIG_LZ4_DECOMPRESS is not set
-CONFIG_LZMA_COMPRESS=y
-CONFIG_LZMA_DECOMPRESS=y
-# CONFIG_LZO_COMPRESS is not set
-# CONFIG_LZO_DECOMPRESS is not set
-# CONFIG_M62332 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_MAC80211_MESSAGE_TRACING is not set
-CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
-# CONFIG_MACB is not set
-# CONFIG_MACB_USE_HWSTAMP is not set
-# CONFIG_MACH_ASM9260 is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_INGENIC is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_JZ4740 is not set
-# CONFIG_MACH_LOONGSON32 is not set
-# CONFIG_MACH_LOONGSON64 is not set
-# CONFIG_MACH_PIC32 is not set
-# CONFIG_MACH_PISTACHIO is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MACH_XILFPGA is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-# CONFIG_MACSEC is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_MACVTAP is not set
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MAG3110 is not set
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
-# CONFIG_MAGIC_SYSRQ_SERIAL is not set
-# CONFIG_MAILBOX is not set
-# CONFIG_MANAGER_SBS is not set
-# CONFIG_MANDATORY_FILE_LOCKING is not set
-# CONFIG_MANGLE_BOOTARGS is not set
-# CONFIG_MARVELL_10G_PHY is not set
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_MAX1027 is not set
-# CONFIG_MAX11100 is not set
-# CONFIG_MAX1118 is not set
-# CONFIG_MAX1363 is not set
-# CONFIG_MAX30100 is not set
-# CONFIG_MAX30102 is not set
-# CONFIG_MAX31856 is not set
-# CONFIG_MAX44000 is not set
-# CONFIG_MAX44009 is not set
-# CONFIG_MAX517 is not set
-# CONFIG_MAX5432 is not set
-# CONFIG_MAX5481 is not set
-# CONFIG_MAX5487 is not set
-# CONFIG_MAX5821 is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-# CONFIG_MAX9611 is not set
-# CONFIG_MAXIM_THERMOCOUPLE is not set
-CONFIG_MAY_USE_DEVLINK=y
-# CONFIG_MB1232 is not set
-# CONFIG_MC3230 is not set
-# CONFIG_MCB is not set
-# CONFIG_MCP320X is not set
-# CONFIG_MCP3422 is not set
-# CONFIG_MCP3911 is not set
-# CONFIG_MCP4018 is not set
-# CONFIG_MCP41010 is not set
-# CONFIG_MCP4131 is not set
-# CONFIG_MCP4531 is not set
-# CONFIG_MCP4725 is not set
-# CONFIG_MCP4922 is not set
-# CONFIG_MCPM is not set
-# CONFIG_MD is not set
-# CONFIG_MDIO_BCM_UNIMAC is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
-# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
-# CONFIG_MDIO_DEVICE is not set
-# CONFIG_MDIO_HISI_FEMAC is not set
-# CONFIG_MDIO_MSCC_MIIM is not set
-# CONFIG_MDIO_OCTEON is not set
-# CONFIG_MDIO_THUNDER is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
-# CONFIG_MEDIA_ATTACH is not set
-# CONFIG_MEDIA_CAMERA_SUPPORT is not set
-# CONFIG_MEDIA_CEC_SUPPORT is not set
-# CONFIG_MEDIA_CONTROLLER is not set
-# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
-# CONFIG_MEDIA_PCI_SUPPORT is not set
-# CONFIG_MEDIA_RADIO_SUPPORT is not set
-# CONFIG_MEDIA_RC_SUPPORT is not set
-# CONFIG_MEDIA_SDR_SUPPORT is not set
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-# CONFIG_MEDIA_SUPPORT is not set
-# CONFIG_MEDIA_USB_SUPPORT is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_MELLANOX_PLATFORM is not set
-CONFIG_MEMBARRIER=y
-# CONFIG_MEMORY is not set
-# CONFIG_MEMORY_FAILURE is not set
-# CONFIG_MEMORY_HOTPLUG is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_MEMTEST is not set
-# CONFIG_MEN_A21_WDT is not set
-# CONFIG_MESON_SM is not set
-CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
-# CONFIG_MFD_88PM800 is not set
-# CONFIG_MFD_88PM805 is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_AAT2870_CORE is not set
-# CONFIG_MFD_AC100 is not set
-# CONFIG_MFD_ACT8945A is not set
-# CONFIG_MFD_ARIZONA_I2C is not set
-# CONFIG_MFD_ARIZONA_SPI is not set
-# CONFIG_MFD_AS3711 is not set
-# CONFIG_MFD_AS3722 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_MFD_ATMEL_FLEXCOM is not set
-# CONFIG_MFD_ATMEL_HLCDC is not set
-# CONFIG_MFD_AXP20X is not set
-# CONFIG_MFD_AXP20X_I2C is not set
-# CONFIG_MFD_BCM590XX is not set
-# CONFIG_MFD_BD9571MWV is not set
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_CPCAP is not set
-# CONFIG_MFD_CROS_EC is not set
-# CONFIG_MFD_CS5535 is not set
-# CONFIG_MFD_DA9052_I2C is not set
-# CONFIG_MFD_DA9052_SPI is not set
-# CONFIG_MFD_DA9055 is not set
-# CONFIG_MFD_DA9062 is not set
-# CONFIG_MFD_DA9063 is not set
-# CONFIG_MFD_DA9150 is not set
-# CONFIG_MFD_DLN2 is not set
-# CONFIG_MFD_EXYNOS_LPASS is not set
-# CONFIG_MFD_HI6421_PMIC is not set
-# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
-# CONFIG_MFD_JANZ_CMODIO is not set
-# CONFIG_MFD_KEMPLD is not set
-# CONFIG_MFD_LM3533 is not set
-# CONFIG_MFD_LOCHNAGAR is not set
-# CONFIG_MFD_LP3943 is not set
-# CONFIG_MFD_LP8788 is not set
-# CONFIG_MFD_MADERA is not set
-# CONFIG_MFD_MAX14577 is not set
-# CONFIG_MFD_MAX77620 is not set
-# CONFIG_MFD_MAX77650 is not set
-# CONFIG_MFD_MAX77686 is not set
-# CONFIG_MFD_MAX77693 is not set
-# CONFIG_MFD_MAX77843 is not set
-# CONFIG_MFD_MAX8907 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_MAX8997 is not set
-# CONFIG_MFD_MAX8998 is not set
-# CONFIG_MFD_MC13XXX is not set
-# CONFIG_MFD_MC13XXX_I2C is not set
-# CONFIG_MFD_MC13XXX_SPI is not set
-# CONFIG_MFD_MENF21BMC is not set
-# CONFIG_MFD_MT6397 is not set
-# CONFIG_MFD_OMAP_USB_HOST is not set
-# CONFIG_MFD_PALMAS is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_PM8921_CORE is not set
-# CONFIG_MFD_PM8XXX is not set
-# CONFIG_MFD_RC5T583 is not set
-# CONFIG_MFD_RDC321X is not set
-# CONFIG_MFD_RETU is not set
-# CONFIG_MFD_RK808 is not set
-# CONFIG_MFD_RN5T618 is not set
-# CONFIG_MFD_ROHM_BD70528 is not set
-# CONFIG_MFD_ROHM_BD718XX is not set
-# CONFIG_MFD_RT5033 is not set
-# CONFIG_MFD_RTSX_PCI is not set
-# CONFIG_MFD_RTSX_USB is not set
-# CONFIG_MFD_SEC_CORE is not set
-# CONFIG_MFD_SI476X_CORE is not set
-# CONFIG_MFD_SKY81452 is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SMSC is not set
-# CONFIG_MFD_STMFX is not set
-# CONFIG_MFD_STMPE is not set
-# CONFIG_MFD_STPMIC1 is not set
-# CONFIG_MFD_SYSCON is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC3589X is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_MFD_TI_AM335X_TSCADC is not set
-# CONFIG_MFD_TI_LMU is not set
-# CONFIG_MFD_TI_LP873X is not set
-# CONFIG_MFD_TI_LP87565 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TPS65086 is not set
-# CONFIG_MFD_TPS65090 is not set
-# CONFIG_MFD_TPS65217 is not set
-# CONFIG_MFD_TPS65218 is not set
-# CONFIG_MFD_TPS6586X is not set
-# CONFIG_MFD_TPS65910 is not set
-# CONFIG_MFD_TPS65912 is not set
-# CONFIG_MFD_TPS65912_I2C is not set
-# CONFIG_MFD_TPS65912_SPI is not set
-# CONFIG_MFD_TPS68470 is not set
-# CONFIG_MFD_TPS80031 is not set
-# CONFIG_MFD_TQMX86 is not set
-# CONFIG_MFD_VIPERBOARD is not set
-# CONFIG_MFD_VX855 is not set
-# CONFIG_MFD_WL1273_CORE is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM831X_I2C is not set
-# CONFIG_MFD_WM831X_SPI is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MG_DISK is not set
-# CONFIG_MICREL_KS8995MA is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_MICROCHIP_KSZ is not set
-# CONFIG_MICROCHIP_PHY is not set
-# CONFIG_MICROCHIP_T1_PHY is not set
-# CONFIG_MICROSEMI_PHY is not set
-# CONFIG_MIGRATION is not set
-CONFIG_MII=y
-# CONFIG_MIKROTIK is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_MIPS_ALCHEMY is not set
-# CONFIG_MIPS_CDMM is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MIPS_FPU_EMULATOR is not set
-# CONFIG_MIPS_FP_SUPPORT is not set
-# CONFIG_MIPS_GENERIC is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_O32_FP64_SUPPORT is not set
-# CONFIG_MIPS_PARAVIRT is not set
-# CONFIG_MIPS_PLATFORM_DEVICES is not set
-# CONFIG_MIPS_SEAD3 is not set
-# CONFIG_MISC_ALCOR_PCI is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_MISC_RTSX_PCI is not set
-# CONFIG_MISC_RTSX_USB is not set
-# CONFIG_MISDN is not set
-# CONFIG_MISDN_AVMFRITZ is not set
-# CONFIG_MISDN_HFCPCI is not set
-# CONFIG_MISDN_HFCUSB is not set
-# CONFIG_MISDN_INFINEON is not set
-# CONFIG_MISDN_NETJET is not set
-# CONFIG_MISDN_SPEEDFAX is not set
-# CONFIG_MISDN_W6692 is not set
-# CONFIG_MKISS is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX5_CORE is not set
-# CONFIG_MLX90614 is not set
-# CONFIG_MLX90632 is not set
-# CONFIG_MLXFW is not set
-# CONFIG_MLXSW_CORE is not set
-# CONFIG_MLX_CPLD_PLATFORM is not set
-# CONFIG_MLX_PLATFORM is not set
-# CONFIG_MMA7455_I2C is not set
-# CONFIG_MMA7455_SPI is not set
-# CONFIG_MMA7660 is not set
-# CONFIG_MMA8452 is not set
-# CONFIG_MMA9551 is not set
-# CONFIG_MMA9553 is not set
-# CONFIG_MMC is not set
-# CONFIG_MMC35240 is not set
-# CONFIG_MMC_ARMMMCI is not set
-# CONFIG_MMC_AU1X is not set
-# CONFIG_MMC_BLOCK is not set
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_MMC_BLOCK_MINORS=8
-# CONFIG_MMC_CAVIUM_THUNDERX is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_CQHCI is not set
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_DW is not set
-# CONFIG_MMC_JZ4740 is not set
-# CONFIG_MMC_MTK is not set
-# CONFIG_MMC_MVSDIO is not set
-# CONFIG_MMC_S3C is not set
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SDHCI_ACPI is not set
-# CONFIG_MMC_SDHCI_AM654 is not set
-# CONFIG_MMC_SDHCI_BCM_KONA is not set
-# CONFIG_MMC_SDHCI_CADENCE is not set
-# CONFIG_MMC_SDHCI_F_SDH30 is not set
-# CONFIG_MMC_SDHCI_IPROC is not set
-# CONFIG_MMC_SDHCI_MSM is not set
-# CONFIG_MMC_SDHCI_OF_ARASAN is not set
-# CONFIG_MMC_SDHCI_OF_ASPEED is not set
-# CONFIG_MMC_SDHCI_OF_AT91 is not set
-# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set
-# CONFIG_MMC_SDHCI_OF_ESDHC is not set
-# CONFIG_MMC_SDHCI_OF_HLWD is not set
-# CONFIG_MMC_SDHCI_OMAP is not set
-# CONFIG_MMC_SDHCI_PXAV2 is not set
-# CONFIG_MMC_SDHCI_PXAV3 is not set
-# CONFIG_MMC_SDHCI_S3C is not set
-# CONFIG_MMC_SDHCI_XENON is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_STM32_SDMMC is not set
-# CONFIG_MMC_TEST is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_TOSHIBA_PCI is not set
-# CONFIG_MMC_USDHI6ROL0 is not set
-# CONFIG_MMC_USHC is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MMC_VUB300 is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_MMU=y
-CONFIG_MODULES=y
-# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
-# CONFIG_MODULE_COMPRESS is not set
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODULE_SIG is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_MODULE_STRIPPED=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MOST is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_ELAN_I2C is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_PS2_FOCALTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_MOUSE_SYNAPTICS_USB is not set
-# CONFIG_MOXTET is not set
-# CONFIG_MPL115 is not set
-# CONFIG_MPL115_I2C is not set
-# CONFIG_MPL115_SPI is not set
-# CONFIG_MPL3115 is not set
-# CONFIG_MPLS is not set
-# CONFIG_MPU3050_I2C is not set
-# CONFIG_MQ_IOSCHED_DEADLINE is not set
-# CONFIG_MQ_IOSCHED_KYBER is not set
-# CONFIG_MS5611 is not set
-# CONFIG_MS5637 is not set
-# CONFIG_MSCC_OCELOT_SWITCH is not set
-# CONFIG_MSDOS_FS is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_MSI_LAPTOP is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_DOCG3 is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_HYPERBUS is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_LATCH_ADDR is not set
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_LPDDR2_NVM is not set
-# CONFIG_MTD_M25P80 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MCHP23K256 is not set
-# CONFIG_MTD_MT81xx_NOR is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_MYLOADER_PARTS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_AMS_DELTA is not set
-# CONFIG_MTD_NAND_AR934X is not set
-# CONFIG_MTD_NAND_AR934X_HW_ECC is not set
-# CONFIG_MTD_NAND_ATMEL is not set
-# CONFIG_MTD_NAND_AU1550 is not set
-# CONFIG_MTD_NAND_BCH is not set
-# CONFIG_MTD_NAND_BF5XX is not set
-# CONFIG_MTD_NAND_BRCMNAND is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_CM_X270 is not set
-# CONFIG_MTD_NAND_CS553X is not set
-# CONFIG_MTD_NAND_DAVINCI is not set
-# CONFIG_MTD_NAND_DENALI is not set
-# CONFIG_MTD_NAND_DENALI_DT is not set
-# CONFIG_MTD_NAND_DENALI_PCI is not set
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xff108018
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_DOCG4 is not set
-# CONFIG_MTD_NAND_ECC is not set
-# CONFIG_MTD_NAND_ECC_BCH is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_ECC_SW_BCH is not set
-# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_IFC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
-# CONFIG_MTD_NAND_FSMC is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_GPMI_NAND is not set
-# CONFIG_MTD_NAND_HISI504 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_JZ4740 is not set
-# CONFIG_MTD_NAND_MPC5121_NFC is not set
-# CONFIG_MTD_NAND_MTK is not set
-# CONFIG_MTD_NAND_MXC is not set
-# CONFIG_MTD_NAND_MXIC is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_NDFC is not set
-# CONFIG_MTD_NAND_NUC900 is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
-# CONFIG_MTD_NAND_ORION is not set
-# CONFIG_MTD_NAND_PASEMI is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_NAND_PXA3xx is not set
-# CONFIG_MTD_NAND_RB4XX is not set
-# CONFIG_MTD_NAND_RB750 is not set
-# CONFIG_MTD_NAND_RICOH is not set
-# CONFIG_MTD_NAND_S3C2410 is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_SH_FLCTL is not set
-# CONFIG_MTD_NAND_SOCRATES is not set
-# CONFIG_MTD_NAND_TMIO is not set
-# CONFIG_MTD_NAND_TXX9NDFMC is not set
-CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_ONENAND is not set
-# CONFIG_MTD_OOPS is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_PARTITIONED_MASTER is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PHYSMAP_GEMINI is not set
-# CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set
-# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
-# CONFIG_MTD_PHYSMAP_VERSATILE is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_RAW_NAND is not set
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_ROM is not set
-CONFIG_MTD_ROOTFS_ROOT_DEV=y
-# CONFIG_MTD_ROUTERBOOT_PARTS is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_SPINAND_MT29F is not set
-# CONFIG_MTD_SPI_NAND is not set
-# CONFIG_MTD_SPI_NOR is not set
-# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=4096
-CONFIG_MTD_SPLIT=y
-# CONFIG_MTD_SPLIT_BCM63XX_FW is not set
-# CONFIG_MTD_SPLIT_BCM_WFI_FW is not set
-# CONFIG_MTD_SPLIT_BRNIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_ELF_FW is not set
-# CONFIG_MTD_SPLIT_EVA_FW is not set
-# CONFIG_MTD_SPLIT_FIRMWARE is not set
-CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
-# CONFIG_MTD_SPLIT_FIT_FW is not set
-# CONFIG_MTD_SPLIT_JIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_LZMA_FW is not set
-# CONFIG_MTD_SPLIT_MINOR_FW is not set
-# CONFIG_MTD_SPLIT_SEAMA_FW is not set
-CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
-CONFIG_MTD_SPLIT_SUPPORT=y
-# CONFIG_MTD_SPLIT_TPLINK_FW is not set
-# CONFIG_MTD_SPLIT_TRX_FW is not set
-# CONFIG_MTD_SPLIT_UIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_WRGG_FW is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SWAP is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_UBI is not set
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-# CONFIG_MTD_UIMAGE_SPLIT is not set
-# CONFIG_MTD_VIRT_CONCAT is not set
-# CONFIG_MTK_MMC is not set
-CONFIG_MULTIUSER=y
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_MVMDIO is not set
-# CONFIG_MVNETA_BM is not set
-# CONFIG_MV_XOR_V2 is not set
-# CONFIG_MWAVE is not set
-# CONFIG_MWL8K is not set
-# CONFIG_MXC4005 is not set
-# CONFIG_MXC6255 is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NAU7802 is not set
-# CONFIG_NBPFAXI_DMA is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NE2000 is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NEC_MARKEINS is not set
-CONFIG_NET=y
-# CONFIG_NETCONSOLE is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVSIM is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_NETFILTER_ADVANCED is not set
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_INGRESS is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_NETLINK_ACCT is not set
-# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NETFILTER_NETLINK_OSF is not set
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_NETFILTER_XT_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_BPF is not set
-# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_CPU is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ECN is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
-# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
-# CONFIG_NETFILTER_XT_TARGET_LOG is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
-# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_TARGET_TEE is not set
-# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETLINK_DIAG is not set
-# CONFIG_NETLINK_MMAP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETROM is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NET_9P is not set
-# CONFIG_NET_ACT_BPF is not set
-# CONFIG_NET_ACT_CSUM is not set
-# CONFIG_NET_ACT_CT is not set
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_IFE is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_MPLS is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_POLICE is not set
-# CONFIG_NET_ACT_SAMPLE is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-# CONFIG_NET_ACT_SKBMOD is not set
-# CONFIG_NET_ACT_TUNNEL_KEY is not set
-# CONFIG_NET_ACT_VLAN is not set
-CONFIG_NET_CADENCE=y
-# CONFIG_NET_CALXEDA_XGMAC is not set
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_BPF is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_FLOWER is not set
-# CONFIG_NET_CLS_FW is not set
-CONFIG_NET_CLS_IND=y
-# CONFIG_NET_CLS_MATCHALL is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_U32 is not set
-CONFIG_NET_CORE=y
-# CONFIG_NET_DEVLINK is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_NET_DSA_BCM_SF2 is not set
-# CONFIG_NET_DSA_LANTIQ_GSWIP is not set
-# CONFIG_NET_DSA_LEGACY is not set
-# CONFIG_NET_DSA_LOOP is not set
-# CONFIG_NET_DSA_MICROCHIP_KSZ8795 is not set
-# CONFIG_NET_DSA_MICROCHIP_KSZ9477 is not set
-# CONFIG_NET_DSA_MT7530 is not set
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6171 is not set
-# CONFIG_NET_DSA_MV88E6352 is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_MV88E6XXX_PTP is not set
-# CONFIG_NET_DSA_QCA8K is not set
-# CONFIG_NET_DSA_REALTEK_SMI is not set
-# CONFIG_NET_DSA_SJA1105 is not set
-# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set
-# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set
-# CONFIG_NET_DSA_TAG_8021Q is not set
-# CONFIG_NET_DSA_TAG_BRCM is not set
-# CONFIG_NET_DSA_TAG_BRCM_PREPEND is not set
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-# CONFIG_NET_DSA_TAG_GSWIP is not set
-# CONFIG_NET_DSA_TAG_KSZ is not set
-# CONFIG_NET_DSA_TAG_LAN9303 is not set
-# CONFIG_NET_DSA_TAG_MTK is not set
-# CONFIG_NET_DSA_TAG_QCA is not set
-# CONFIG_NET_DSA_TAG_RTL4_A is not set
-# CONFIG_NET_DSA_TAG_SJA1105 is not set
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-# CONFIG_NET_DSA_VITESSE_VSC73XX is not set
-# CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM is not set
-# CONFIG_NET_DSA_VITESSE_VSC73XX_SPI is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_EMATCH_CANID is not set
-# CONFIG_NET_EMATCH_CMP is not set
-# CONFIG_NET_EMATCH_IPT is not set
-# CONFIG_NET_EMATCH_META is not set
-# CONFIG_NET_EMATCH_NBYTE is not set
-CONFIG_NET_EMATCH_STACK=32
-# CONFIG_NET_EMATCH_TEXT is not set
-# CONFIG_NET_EMATCH_U32 is not set
-# CONFIG_NET_FAILOVER is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NET_FOU is not set
-# CONFIG_NET_FOU_IP_TUNNELS is not set
-# CONFIG_NET_IFE is not set
-# CONFIG_NET_IPGRE is not set
-CONFIG_NET_IPGRE_BROADCAST=y
-# CONFIG_NET_IPGRE_DEMUX is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPVTI is not set
-# CONFIG_NET_IP_TUNNEL is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_NET_KEY_MIGRATE is not set
-# CONFIG_NET_L3_MASTER_DEV is not set
-# CONFIG_NET_MPLS_GSO is not set
-# CONFIG_NET_NCSI is not set
-# CONFIG_NET_NSH is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_NET_PTP_CLASSIFY is not set
-CONFIG_NET_RX_BUSY_POLL=y
-# CONFIG_NET_SB1000 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_NET_SCH_ATM is not set
-# CONFIG_NET_SCH_CAKE is not set
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_CBS is not set
-# CONFIG_NET_SCH_CHOKE is not set
-# CONFIG_NET_SCH_CODEL is not set
-# CONFIG_NET_SCH_DEFAULT is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_ETF is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_SCH_FQ is not set
-CONFIG_NET_SCH_FQ_CODEL=y
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_HHF is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_INGRESS is not set
-# CONFIG_NET_SCH_MQPRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_PIE is not set
-# CONFIG_NET_SCH_PLUG is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_QFQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFB is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_SKBPRIO is not set
-# CONFIG_NET_SCH_TAPRIO is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCTPPROBE is not set
-# CONFIG_NET_SWITCHDEV is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_TC_SKB_EXT is not set
-# CONFIG_NET_TEAM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_NET_UDP_TUNNEL is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_NET_VENDOR_8390=y
-CONFIG_NET_VENDOR_ADAPTEC=y
-CONFIG_NET_VENDOR_AGERE=y
-CONFIG_NET_VENDOR_ALACRITECH=y
-CONFIG_NET_VENDOR_ALTEON=y
-CONFIG_NET_VENDOR_AMAZON=y
-CONFIG_NET_VENDOR_AMD=y
-CONFIG_NET_VENDOR_AQUANTIA=y
-CONFIG_NET_VENDOR_ARC=y
-CONFIG_NET_VENDOR_ATHEROS=y
-CONFIG_NET_VENDOR_AURORA=y
-CONFIG_NET_VENDOR_BROADCOM=y
-CONFIG_NET_VENDOR_BROCADE=y
-CONFIG_NET_VENDOR_CADENCE=y
-CONFIG_NET_VENDOR_CAVIUM=y
-CONFIG_NET_VENDOR_CHELSIO=y
-CONFIG_NET_VENDOR_CIRRUS=y
-CONFIG_NET_VENDOR_CISCO=y
-CONFIG_NET_VENDOR_CORTINA=y
-CONFIG_NET_VENDOR_DEC=y
-CONFIG_NET_VENDOR_DLINK=y
-CONFIG_NET_VENDOR_EMULEX=y
-CONFIG_NET_VENDOR_EXAR=y
-CONFIG_NET_VENDOR_EZCHIP=y
-CONFIG_NET_VENDOR_FARADAY=y
-CONFIG_NET_VENDOR_FREESCALE=y
-CONFIG_NET_VENDOR_FUJITSU=y
-CONFIG_NET_VENDOR_GOOGLE=y
-CONFIG_NET_VENDOR_HISILICON=y
-CONFIG_NET_VENDOR_HP=y
-CONFIG_NET_VENDOR_HUAWEI=y
-CONFIG_NET_VENDOR_I825XX=y
-CONFIG_NET_VENDOR_IBM=y
-CONFIG_NET_VENDOR_INTEL=y
-CONFIG_NET_VENDOR_MARVELL=y
-CONFIG_NET_VENDOR_MELLANOX=y
-CONFIG_NET_VENDOR_MICREL=y
-CONFIG_NET_VENDOR_MICROCHIP=y
-CONFIG_NET_VENDOR_MICROSEMI=y
-CONFIG_NET_VENDOR_MYRI=y
-CONFIG_NET_VENDOR_NATSEMI=y
-CONFIG_NET_VENDOR_NETERION=y
-CONFIG_NET_VENDOR_NETRONOME=y
-CONFIG_NET_VENDOR_NI=y
-CONFIG_NET_VENDOR_NVIDIA=y
-CONFIG_NET_VENDOR_OKI=y
-CONFIG_NET_VENDOR_PACKET_ENGINES=y
-CONFIG_NET_VENDOR_PENSANDO=y
-CONFIG_NET_VENDOR_QLOGIC=y
-CONFIG_NET_VENDOR_QUALCOMM=y
-CONFIG_NET_VENDOR_RDC=y
-CONFIG_NET_VENDOR_REALTEK=y
-CONFIG_NET_VENDOR_RENESAS=y
-CONFIG_NET_VENDOR_ROCKER=y
-CONFIG_NET_VENDOR_SAMSUNG=y
-CONFIG_NET_VENDOR_SEEQ=y
-CONFIG_NET_VENDOR_SILAN=y
-CONFIG_NET_VENDOR_SIS=y
-CONFIG_NET_VENDOR_SMSC=y
-CONFIG_NET_VENDOR_SOCIONEXT=y
-CONFIG_NET_VENDOR_SOLARFLARE=y
-CONFIG_NET_VENDOR_STMICRO=y
-CONFIG_NET_VENDOR_SUN=y
-CONFIG_NET_VENDOR_SYNOPSYS=y
-CONFIG_NET_VENDOR_TEHUTI=y
-CONFIG_NET_VENDOR_TI=y
-CONFIG_NET_VENDOR_TOSHIBA=y
-CONFIG_NET_VENDOR_VIA=y
-CONFIG_NET_VENDOR_WIZNET=y
-CONFIG_NET_VENDOR_XILINX=y
-CONFIG_NET_VENDOR_XIRCOM=y
-# CONFIG_NET_VRF is not set
-# CONFIG_NET_XGENE is not set
-CONFIG_NEW_LEDS=y
-# CONFIG_NFC is not set
-# CONFIG_NFP is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V2_ACL is not set
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFS_ACL_SUPPORT is not set
-CONFIG_NFS_COMMON=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_FSCACHE is not set
-# CONFIG_NFS_SWAP is not set
-# CONFIG_NFS_V2 is not set
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_V4_1 is not set
-# CONFIG_NFTL is not set
-# CONFIG_NFT_BRIDGE_META is not set
-# CONFIG_NFT_BRIDGE_REJECT is not set
-# CONFIG_NFT_CONNLIMIT is not set
-# CONFIG_NFT_DUP_IPV4 is not set
-# CONFIG_NFT_DUP_IPV6 is not set
-# CONFIG_NFT_FIB_IPV4 is not set
-# CONFIG_NFT_FIB_IPV6 is not set
-# CONFIG_NFT_FIB_NETDEV is not set
-# CONFIG_NFT_FLOW_OFFLOAD is not set
-# CONFIG_NFT_OBJREF is not set
-# CONFIG_NFT_OSF is not set
-# CONFIG_NFT_RT is not set
-# CONFIG_NFT_SET_BITMAP is not set
-# CONFIG_NFT_SOCKET is not set
-# CONFIG_NFT_SYNPROXY is not set
-# CONFIG_NFT_TPROXY is not set
-# CONFIG_NFT_TUNNEL is not set
-# CONFIG_NFT_XFRM is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-# CONFIG_NF_CONNTRACK_BRIDGE is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CONNTRACK_FTP is not set
-# CONFIG_NF_CONNTRACK_H323 is not set
-# CONFIG_NF_CONNTRACK_IRC is not set
-# CONFIG_NF_CONNTRACK_LABELS is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-CONFIG_NF_CONNTRACK_PROCFS=y
-# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SECMARK is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_CONNTRACK_SNMP is not set
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CONNTRACK_TIMEOUT is not set
-# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
-# CONFIG_NF_CONNTRACK_ZONES is not set
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NF_CT_NETLINK_HELPER is not set
-# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_GRE is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_NF_DUP_IPV4 is not set
-# CONFIG_NF_DUP_IPV6 is not set
-# CONFIG_NF_FLOW_TABLE is not set
-# CONFIG_NF_LOG_ARP is not set
-# CONFIG_NF_LOG_BRIDGE is not set
-# CONFIG_NF_LOG_IPV4 is not set
-# CONFIG_NF_LOG_NETDEV is not set
-# CONFIG_NF_NAT is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_FTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_IRC is not set
-# CONFIG_NF_NAT_MASQUERADE is not set
-# CONFIG_NF_NAT_NEEDED is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_PROTO_GRE is not set
-# CONFIG_NF_NAT_SIP is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_REJECT_IPV4 is not set
-# CONFIG_NF_REJECT_IPV6 is not set
-# CONFIG_NF_SOCKET_IPV4 is not set
-# CONFIG_NF_SOCKET_IPV6 is not set
-# CONFIG_NF_TABLES is not set
-CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_TABLES_BRIDGE=y
-CONFIG_NF_TABLES_INET=y
-CONFIG_NF_TABLES_IPV4=y
-CONFIG_NF_TABLES_IPV6=y
-CONFIG_NF_TABLES_NETDEV=y
-# CONFIG_NF_TABLES_SET is not set
-# CONFIG_NF_TPROXY_IPV4 is not set
-# CONFIG_NF_TPROXY_IPV6 is not set
-# CONFIG_NI65 is not set
-# CONFIG_NI903X_WDT is not set
-# CONFIG_NIC7018_WDT is not set
-# CONFIG_NILFS2_FS is not set
-# CONFIG_NIU is not set
-# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
-CONFIG_NLATTR=y
-# CONFIG_NLMON is not set
-# CONFIG_NLM_XLP_BOARD is not set
-# CONFIG_NLM_XLR_BOARD is not set
-# CONFIG_NLS is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_MAC_CELTIC is not set
-# CONFIG_NLS_MAC_CENTEURO is not set
-# CONFIG_NLS_MAC_CROATIAN is not set
-# CONFIG_NLS_MAC_CYRILLIC is not set
-# CONFIG_NLS_MAC_GAELIC is not set
-# CONFIG_NLS_MAC_GREEK is not set
-# CONFIG_NLS_MAC_ICELAND is not set
-# CONFIG_NLS_MAC_INUIT is not set
-# CONFIG_NLS_MAC_ROMAN is not set
-# CONFIG_NLS_MAC_ROMANIAN is not set
-# CONFIG_NLS_MAC_TURKISH is not set
-# CONFIG_NLS_UTF8 is not set
-CONFIG_NMI_LOG_BUF_SHIFT=13
-# CONFIG_NOA1305 is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_NOTIFIER_ERROR_INJECTION is not set
-# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set
-# CONFIG_NOZOMI is not set
-# CONFIG_NO_BOOTMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_NO_HZ_FULL is not set
-# CONFIG_NO_HZ_IDLE is not set
-# CONFIG_NS83820 is not set
-# CONFIG_NTB is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_NTP_PPS is not set
-# CONFIG_NULL_TTY is not set
-# CONFIG_NUMA is not set
-# CONFIG_NVM is not set
-# CONFIG_NVMEM is not set
-# CONFIG_NVMEM_BCM_OCOTP is not set
-# CONFIG_NVMEM_IMX_OCOTP is not set
-# CONFIG_NVMEM_REBOOT_MODE is not set
-# CONFIG_NVMEM_SYSFS is not set
-# CONFIG_NVME_FC is not set
-# CONFIG_NVME_TARGET is not set
-# CONFIG_NVME_TCP is not set
-# CONFIG_NVRAM is not set
-# CONFIG_NV_TCO is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_NXP_TJA11XX_PHY is not set
-# CONFIG_N_GSM is not set
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_OBS600 is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_OCTEONTX2_AF is not set
-# CONFIG_OF_OVERLAY is not set
-CONFIG_OF_RESERVED_MEM=y
-# CONFIG_OF_UNITTEST is not set
-# CONFIG_OMAP2_DSS_DEBUG is not set
-# CONFIG_OMAP2_DSS_DEBUGFS is not set
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP_OCP2SCP is not set
-# CONFIG_OMAP_USB2 is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_OPENVSWITCH is not set
-# CONFIG_OPROFILE is not set
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-# CONFIG_OPT3001 is not set
-CONFIG_OPTIMIZE_INLINING=y
-# CONFIG_ORANGEFS_FS is not set
-# CONFIG_ORION_WATCHDOG is not set
-# CONFIG_OSF_PARTITION is not set
-CONFIG_OVERLAY_FS=y
-# CONFIG_OVERLAY_FS_INDEX is not set
-# CONFIG_OVERLAY_FS_METACOPY is not set
-CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
-# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
-CONFIG_OVERLAY_FS_XINO_AUTO=y
-# CONFIG_OWL_LOADER is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_PA12203001 is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_DIAG is not set
-# CONFIG_PACKING is not set
-# CONFIG_PAGE_EXTENSION is not set
-# CONFIG_PAGE_OWNER is not set
-# CONFIG_PAGE_POISONING is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PALMAS_GPADC is not set
-# CONFIG_PANASONIC_LAPTOP is not set
-# CONFIG_PANEL is not set
-CONFIG_PANIC_ON_OOPS=y
-CONFIG_PANIC_ON_OOPS_VALUE=1
-CONFIG_PANIC_TIMEOUT=1
-# CONFIG_PANTHERLORD_FF is not set
-# CONFIG_PARAVIRT is not set
-# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PARPORT_1284 is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARASAN_CF is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CS5535 is not set
-# CONFIG_PATA_CS5536 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IMX is not set
-# CONFIG_PATA_ISAPNP is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OCTEON_CF is not set
-# CONFIG_PATA_OF_PLATFORM is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_PC104 is not set
-# CONFIG_PC300TOO is not set
-# CONFIG_PCCARD is not set
-# CONFIG_PCH_DMA is not set
-# CONFIG_PCH_GBE is not set
-# CONFIG_PCH_PHUB is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI200SYN is not set
-# CONFIG_PCIEAER is not set
-# CONFIG_PCIEAER_INJECT is not set
-# CONFIG_PCIEASPM is not set
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCIE_AL is not set
-# CONFIG_PCIE_ALTERA is not set
-# CONFIG_PCIE_ARMADA_8K is not set
-# CONFIG_PCIE_BW is not set
-# CONFIG_PCIE_CADENCE_HOST is not set
-# CONFIG_PCIE_DPC is not set
-# CONFIG_PCIE_DW_PLAT is not set
-# CONFIG_PCIE_DW_PLAT_HOST is not set
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIE_IPROC is not set
-# CONFIG_PCIE_KIRIN is not set
-# CONFIG_PCIE_PTM is not set
-# CONFIG_PCIE_XILINX is not set
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_PCI_ATMEL is not set
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
-# CONFIG_PCI_ENDPOINT is not set
-# CONFIG_PCI_ENDPOINT_TEST is not set
-# CONFIG_PCI_FTPCI100 is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_PCI_HISI is not set
-# CONFIG_PCI_HOST_GENERIC is not set
-# CONFIG_PCI_HOST_THUNDER_ECAM is not set
-# CONFIG_PCI_HOST_THUNDER_PEM is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCI_LAYERSCAPE is not set
-# CONFIG_PCI_MESON is not set
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_PASID is not set
-# CONFIG_PCI_PF_STUB is not set
-# CONFIG_PCI_PRI is not set
-CONFIG_PCI_QUIRKS=y
-# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_SW_SWITCHTEC is not set
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCI_V3_SEMI is not set
-# CONFIG_PCI_XGENE is not set
-# CONFIG_PCMCIA is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_ATMEL is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_HERMES is not set
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCNET32 is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_PD6729 is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_PERCPU_STATS is not set
-# CONFIG_PERCPU_TEST is not set
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_EVENTS_AMD_POWER is not set
-# CONFIG_PERSISTENT_KEYRINGS is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_PHONET is not set
-# CONFIG_PHYLIB is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-# CONFIG_PHY_CADENCE_DP is not set
-# CONFIG_PHY_CADENCE_DPHY is not set
-# CONFIG_PHY_CADENCE_SIERRA is not set
-# CONFIG_PHY_CPCAP_USB is not set
-# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
-# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
-# CONFIG_PHY_FSL_IMX8MQ_USB is not set
-# CONFIG_PHY_MAPPHONE_MDM6600 is not set
-# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
-# CONFIG_PHY_OCELOT_SERDES is not set
-# CONFIG_PHY_PXA_28NM_HSIC is not set
-# CONFIG_PHY_PXA_28NM_USB2 is not set
-# CONFIG_PHY_QCOM_DWC3 is not set
-# CONFIG_PHY_QCOM_USB_HS is not set
-# CONFIG_PHY_QCOM_USB_HSIC is not set
-# CONFIG_PHY_SAMSUNG_USB2 is not set
-# CONFIG_PHY_TUSB1210 is not set
-# CONFIG_PHY_XGENE is not set
-# CONFIG_PI433 is not set
-# CONFIG_PID_IN_CONTEXTIDR is not set
-# CONFIG_PID_NS is not set
-CONFIG_PINCONF=y
-# CONFIG_PINCTRL is not set
-# CONFIG_PINCTRL_AMD is not set
-# CONFIG_PINCTRL_AXP209 is not set
-# CONFIG_PINCTRL_CEDARFORK is not set
-# CONFIG_PINCTRL_EXYNOS is not set
-# CONFIG_PINCTRL_EXYNOS5440 is not set
-# CONFIG_PINCTRL_ICELAKE is not set
-# CONFIG_PINCTRL_INGENIC is not set
-# CONFIG_PINCTRL_MCP23S08 is not set
-# CONFIG_PINCTRL_MSM8X74 is not set
-# CONFIG_PINCTRL_OCELOT is not set
-CONFIG_PINCTRL_SINGLE=y
-# CONFIG_PINCTRL_STMFX is not set
-# CONFIG_PINCTRL_SX150X is not set
-CONFIG_PINMUX=y
-# CONFIG_PKCS7_MESSAGE_PARSER is not set
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-# CONFIG_PL320_MBOX is not set
-# CONFIG_PL330_DMA is not set
-# CONFIG_PLATFORM_MHU is not set
-# CONFIG_PLAT_SPEAR is not set
-# CONFIG_PLIP is not set
-# CONFIG_PLX_HERMES is not set
-# CONFIG_PM is not set
-# CONFIG_PMBUS is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMS7003 is not set
-# CONFIG_PM_AUTOSLEEP is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_DEVFREQ is not set
-# CONFIG_PM_WAKELOCKS is not set
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_POSIX_TIMERS=y
-# CONFIG_POWERCAP is not set
-# CONFIG_POWER_AVS is not set
-# CONFIG_POWER_RESET is not set
-# CONFIG_POWER_RESET_BRCMKONA is not set
-# CONFIG_POWER_RESET_BRCMSTB is not set
-# CONFIG_POWER_RESET_GPIO is not set
-# CONFIG_POWER_RESET_GPIO_RESTART is not set
-# CONFIG_POWER_RESET_LINKSTATION is not set
-# CONFIG_POWER_RESET_LTC2952 is not set
-# CONFIG_POWER_RESET_PIIX4_POWEROFF is not set
-# CONFIG_POWER_RESET_QNAP is not set
-# CONFIG_POWER_RESET_RESTART is not set
-# CONFIG_POWER_RESET_SYSCON is not set
-# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
-# CONFIG_POWER_RESET_VERSATILE is not set
-# CONFIG_POWER_RESET_XGENE is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_POWER_SUPPLY_HWMON is not set
-# CONFIG_PPC4xx_GPIO is not set
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
-# CONFIG_PPP is not set
-# CONFIG_PPPOATM is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_DEFLATE is not set
-CONFIG_PPP_FILTER=y
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPS is not set
-# CONFIG_PPS_CLIENT_GPIO is not set
-# CONFIG_PPS_CLIENT_KTIMER is not set
-# CONFIG_PPS_CLIENT_LDISC is not set
-# CONFIG_PPS_CLIENT_PARPORT is not set
-# CONFIG_PPS_DEBUG is not set
-# CONFIG_PPTP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
-# CONFIG_PREEMPTIRQ_EVENTS is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_PRINTK=y
-# CONFIG_PRINTK_CALLER is not set
-CONFIG_PRINTK_NMI=y
-CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
-# CONFIG_PRINTK_TIME is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_PRISM2_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_PROC_CHILDREN is not set
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-# CONFIG_PROC_STRIPPED is not set
-CONFIG_PROC_SYSCTL=y
-# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILING is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_PROVE_RCU is not set
-# CONFIG_PROVE_RCU_LIST is not set
-# CONFIG_PROVE_RCU_REPEATEDLY is not set
-# CONFIG_PSAMPLE is not set
-# CONFIG_PSB6970_PHY is not set
-# CONFIG_PSI is not set
-# CONFIG_PSTORE is not set
-# CONFIG_PSTORE_842_COMPRESS is not set
-# CONFIG_PSTORE_COMPRESS is not set
-# CONFIG_PSTORE_CONSOLE is not set
-# CONFIG_PSTORE_DEFLATE_COMPRESS is not set
-# CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT is not set
-# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
-# CONFIG_PSTORE_LZ4_COMPRESS is not set
-# CONFIG_PSTORE_LZO_COMPRESS is not set
-# CONFIG_PSTORE_PMSG is not set
-# CONFIG_PSTORE_RAM is not set
-# CONFIG_PSTORE_ZSTD_COMPRESS is not set
-# CONFIG_PTP_1588_CLOCK is not set
-# CONFIG_PTP_1588_CLOCK_IXP46X is not set
-# CONFIG_PTP_1588_CLOCK_KVM is not set
-# CONFIG_PTP_1588_CLOCK_PCH is not set
-# CONFIG_PUBLIC_KEY_ALGO_RSA is not set
-# CONFIG_PVPANIC is not set
-# CONFIG_PWM is not set
-# CONFIG_PWM_FSL_FTM is not set
-# CONFIG_PWM_PCA9685 is not set
-CONFIG_PWRSEQ_EMMC=y
-# CONFIG_PWRSEQ_SD8787 is not set
-CONFIG_PWRSEQ_SIMPLE=y
-# CONFIG_QCA7000 is not set
-# CONFIG_QCA7000_SPI is not set
-# CONFIG_QCA7000_UART is not set
-# CONFIG_QCOM_EMAC is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_1003 is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_1009 is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_E1041 is not set
-# CONFIG_QCOM_HIDMA is not set
-# CONFIG_QCOM_HIDMA_MGMT is not set
-# CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set
-# CONFIG_QCOM_SPMI_ADC5 is not set
-# CONFIG_QCOM_SPMI_IADC is not set
-# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
-# CONFIG_QCOM_SPMI_VADC is not set
-# CONFIG_QED is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX6FS_FS is not set
-# CONFIG_QORIQ_CPUFREQ is not set
-# CONFIG_QORIQ_THERMAL is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_QUEUED_LOCK_STAT is not set
-# CONFIG_QUOTA is not set
-# CONFIG_QUOTACTL is not set
-# CONFIG_QUOTA_DEBUG is not set
-# CONFIG_R3964 is not set
-# CONFIG_R6040 is not set
-# CONFIG_R8169 is not set
-# CONFIG_R8188EU is not set
-# CONFIG_R8712U is not set
-# CONFIG_R8723AU is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-# CONFIG_RAID6_PQ_BENCHMARK is not set
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_RALINK is not set
-# CONFIG_RANDOM32_SELFTEST is not set
-# CONFIG_RANDOMIZE_BASE is not set
-# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
-# CONFIG_RANDOM_TRUST_CPU is not set
-# CONFIG_RAPIDIO is not set
-# CONFIG_RAS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_RBTREE_TEST is not set
-# CONFIG_RCU_BOOST is not set
-CONFIG_RCU_CPU_STALL_TIMEOUT=21
-# CONFIG_RCU_EQS_DEBUG is not set
-# CONFIG_RCU_EXPEDITE_BOOT is not set
-# CONFIG_RCU_EXPERT is not set
-CONFIG_RCU_KTHREAD_PRIO=0
-CONFIG_RCU_NEED_SEGCBLIST=y
-# CONFIG_RCU_PERF_TEST is not set
-CONFIG_RCU_STALL_COMMON=y
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3
-# CONFIG_RCU_TRACE is not set
-# CONFIG_RC_ATI_REMOTE is not set
-# CONFIG_RC_CORE is not set
-# CONFIG_RC_DECODERS is not set
-# CONFIG_RC_LOOPBACK is not set
-# CONFIG_RC_MAP is not set
-# CONFIG_RDS is not set
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_GZIP is not set
-# CONFIG_RD_LZ4 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-# CONFIG_RD_XZ is not set
-# CONFIG_READABLE_ASM is not set
-# CONFIG_READ_ONLY_THP_FOR_FS is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_REED_SOLOMON is not set
-# CONFIG_REED_SOLOMON_DEC8 is not set
-# CONFIG_REED_SOLOMON_ENC8 is not set
-# CONFIG_REED_SOLOMON_TEST is not set
-# CONFIG_REFCOUNT_FULL is not set
-# CONFIG_REGMAP is not set
-# CONFIG_REGMAP_I2C is not set
-# CONFIG_REGMAP_MMIO is not set
-# CONFIG_REGMAP_SPI is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_88PG86X is not set
-# CONFIG_REGULATOR_ACT8865 is not set
-# CONFIG_REGULATOR_AD5398 is not set
-# CONFIG_REGULATOR_ANATOP is not set
-# CONFIG_REGULATOR_DA9210 is not set
-# CONFIG_REGULATOR_DA9211 is not set
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FAN53555 is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_GPIO is not set
-# CONFIG_REGULATOR_ISL6271A is not set
-# CONFIG_REGULATOR_ISL9305 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_LP3972 is not set
-# CONFIG_REGULATOR_LP872X is not set
-# CONFIG_REGULATOR_LP8755 is not set
-# CONFIG_REGULATOR_LTC3589 is not set
-# CONFIG_REGULATOR_LTC3676 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX77620 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_MAX8952 is not set
-# CONFIG_REGULATOR_MAX8973 is not set
-# CONFIG_REGULATOR_MCP16502 is not set
-# CONFIG_REGULATOR_MT6311 is not set
-# CONFIG_REGULATOR_PFUZE100 is not set
-# CONFIG_REGULATOR_PV88060 is not set
-# CONFIG_REGULATOR_PV88080 is not set
-# CONFIG_REGULATOR_PV88090 is not set
-# CONFIG_REGULATOR_PWM is not set
-# CONFIG_REGULATOR_SLG51000 is not set
-# CONFIG_REGULATOR_SY8106A is not set
-# CONFIG_REGULATOR_SY8824X is not set
-# CONFIG_REGULATOR_TI_ABB is not set
-# CONFIG_REGULATOR_TPS51632 is not set
-# CONFIG_REGULATOR_TPS62360 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_REGULATOR_TPS65132 is not set
-# CONFIG_REGULATOR_TPS6524X is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_VCTRL is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_FS_POSIX_ACL is not set
-# CONFIG_REISERFS_FS_SECURITY is not set
-CONFIG_REISERFS_FS_XATTR=y
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_RELAY is not set
-# CONFIG_RELOCATABLE is not set
-# CONFIG_REMOTEPROC is not set
-# CONFIG_RENESAS_PHY is not set
-# CONFIG_RESET_ATH79 is not set
-# CONFIG_RESET_BERLIN is not set
-# CONFIG_RESET_CONTROLLER is not set
-# CONFIG_RESET_IMX7 is not set
-# CONFIG_RESET_LANTIQ is not set
-# CONFIG_RESET_LPC18XX is not set
-# CONFIG_RESET_MESON is not set
-# CONFIG_RESET_PISTACHIO is not set
-# CONFIG_RESET_SOCFPGA is not set
-# CONFIG_RESET_STM32 is not set
-# CONFIG_RESET_SUNXI is not set
-# CONFIG_RESET_TEGRA_BPMP is not set
-# CONFIG_RESET_TI_SYSCON is not set
-# CONFIG_RESET_ZYNQ is not set
-# CONFIG_RFD77402 is not set
-# CONFIG_RFD_FTL is not set
-CONFIG_RFKILL=y
-# CONFIG_RFKILL_FULL is not set
-# CONFIG_RFKILL_GPIO is not set
-# CONFIG_RFKILL_INPUT is not set
-# CONFIG_RFKILL_LEDS is not set
-# CONFIG_RFKILL_REGULATOR is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_RING_BUFFER_STARTUP_TEST is not set
-# CONFIG_RMI4_CORE is not set
-# CONFIG_RMNET is not set
-# CONFIG_ROCKCHIP_PHY is not set
-# CONFIG_ROCKER is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_ROSE is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
-# CONFIG_RPMSG_VIRTIO is not set
-# CONFIG_RPR0521 is not set
-# CONFIG_RSEQ is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_RTC_DEBUG is not set
-# CONFIG_RTC_DRV_ABB5ZES3 is not set
-# CONFIG_RTC_DRV_ABEOZ9 is not set
-# CONFIG_RTC_DRV_ABX80X is not set
-# CONFIG_RTC_DRV_ARMADA38X is not set
-# CONFIG_RTC_DRV_AU1XXX is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_CADENCE is not set
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1302 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1307_CENTURY is not set
-# CONFIG_RTC_DRV_DS1307_HWMON is not set
-# CONFIG_RTC_DRV_DS1343 is not set
-# CONFIG_RTC_DRV_DS1347 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1685_FAMILY is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_DS2404 is not set
-# CONFIG_RTC_DRV_DS3232 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_EM3027 is not set
-# CONFIG_RTC_DRV_EP93XX is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_FTRTC010 is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
-# CONFIG_RTC_DRV_HYM8563 is not set
-# CONFIG_RTC_DRV_ISL12022 is not set
-# CONFIG_RTC_DRV_ISL12026 is not set
-# CONFIG_RTC_DRV_ISL12057 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_JZ4740 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_M41T93 is not set
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_MAX6916 is not set
-# CONFIG_RTC_DRV_MCP795 is not set
-# CONFIG_RTC_DRV_MOXART is not set
-# CONFIG_RTC_DRV_MPC5121 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_OMAP is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-# CONFIG_RTC_DRV_PCF2127 is not set
-# CONFIG_RTC_DRV_PCF85063 is not set
-# CONFIG_RTC_DRV_PCF8523 is not set
-# CONFIG_RTC_DRV_PCF85363 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_RTC_DRV_PS3 is not set
-# CONFIG_RTC_DRV_PT7C4338 is not set
-# CONFIG_RTC_DRV_R7301 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_RTC7301 is not set
-# CONFIG_RTC_DRV_RV3028 is not set
-# CONFIG_RTC_DRV_RV3029C2 is not set
-# CONFIG_RTC_DRV_RV8803 is not set
-# CONFIG_RTC_DRV_RX4581 is not set
-# CONFIG_RTC_DRV_RX6110 is not set
-# CONFIG_RTC_DRV_RX8010 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_SD3078 is not set
-# CONFIG_RTC_DRV_SNVS is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_SUN6I is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_XGENE is not set
-# CONFIG_RTC_DRV_ZYNQMP is not set
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_NVMEM is not set
-CONFIG_RTC_SYSTOHC=y
-CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_RTL8192E is not set
-# CONFIG_RTL8192U is not set
-# CONFIG_RTL8306_PHY is not set
-# CONFIG_RTL8366RB_PHY is not set
-# CONFIG_RTL8366S_PHY is not set
-# CONFIG_RTL8366_SMI is not set
-# CONFIG_RTL8366_SMI_DEBUG_FS is not set
-# CONFIG_RTL8367B_PHY is not set
-# CONFIG_RTL8367_PHY is not set
-# CONFIG_RTLLIB is not set
-# CONFIG_RTL_CARDS is not set
-# CONFIG_RTS5208 is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_RUNTIME_DEBUG is not set
-CONFIG_RUNTIME_TESTING_MENU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_RXKAD=y
-# CONFIG_S2IO is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_SAMSUNG_LAPTOP is not set
-# CONFIG_SATA_ACARD_AHCI is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_AHCI_PLATFORM is not set
-# CONFIG_SATA_DWC is not set
-# CONFIG_SATA_FSL is not set
-# CONFIG_SATA_HIGHBANK is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_MOBILE_LPM_POLICY=0
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_RCAR is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SBC_FITPC2_WATCHDOG is not set
-CONFIG_SBITMAP=y
-# CONFIG_SC92031 is not set
-# CONFIG_SCA3000 is not set
-# CONFIG_SCACHE_DEBUGFS is not set
-# CONFIG_SCC is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_SCHED_AUTOGROUP is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCHED_MC is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCHED_SMT is not set
-# CONFIG_SCHED_STACK_END_CHECK is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_SCR24X is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_AM53C974 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_BNX2X_FCOE is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CHELSIO_FCOE is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_CXGB4_ISCSI is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_ESAS2R is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_FDOMAIN_PCI is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_HISI_SAS is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_ISCI is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_LPFC is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_MPT3SAS is not set
-# CONFIG_SCSI_MQ_DEFAULT is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-# CONFIG_SCSI_MVUMI is not set
-# CONFIG_SCSI_MYRB is not set
-# CONFIG_SCSI_MYRS is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_PMCRAID is not set
-CONFIG_SCSI_PROC_FS=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-# CONFIG_SCSI_SMARTPQI is not set
-# CONFIG_SCSI_SNIC is not set
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_UFSHCD is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-# CONFIG_SCSI_VIRTIO is not set
-# CONFIG_SCSI_WD719X is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_SD_ADC_MODULATOR is not set
-# CONFIG_SECCOMP is not set
-CONFIG_SECTION_MISMATCH_WARN_ONLY=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_APPARMOR is not set
-CONFIG_SECURITY_DMESG_RESTRICT=y
-# CONFIG_SECURITY_LOADPIN is not set
-# CONFIG_SECURITY_LOCKDOWN_LSM is not set
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_SAFESETID is not set
-# CONFIG_SECURITY_SELINUX_AVC_STATS is not set
-# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
-CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
-# CONFIG_SECURITY_SELINUX_DEVELOP is not set
-# CONFIG_SECURITY_SELINUX_DISABLE is not set
-# CONFIG_SECURITY_SMACK is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_SECURITY_YAMA is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_SENSIRION_SGP30 is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_ACPI_POWER is not set
-# CONFIG_SENSORS_AD7314 is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADC128D818 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM1275 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADS1015 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_ADS7871 is not set
-# CONFIG_SENSORS_ADT7310 is not set
-# CONFIG_SENSORS_ADT7410 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_APDS990X is not set
-# CONFIG_SENSORS_APPLESMC is not set
-# CONFIG_SENSORS_AS370 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ASPEED is not set
-# CONFIG_SENSORS_ATK0110 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_BH1770 is not set
-# CONFIG_SENSORS_BH1780 is not set
-# CONFIG_SENSORS_CORETEMP is not set
-# CONFIG_SENSORS_DELL_SMM is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_DS620 is not set
-# CONFIG_SENSORS_EMC1403 is not set
-# CONFIG_SENSORS_EMC2103 is not set
-# CONFIG_SENSORS_EMC6W201 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_FAM15H_POWER is not set
-# CONFIG_SENSORS_FSCHMD is not set
-# CONFIG_SENSORS_FTSTEUTATES is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_G762 is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_GPIO_FAN is not set
-# CONFIG_SENSORS_GSC is not set
-# CONFIG_SENSORS_HDAPS is not set
-# CONFIG_SENSORS_HIH6130 is not set
-# CONFIG_SENSORS_HMC5843 is not set
-# CONFIG_SENSORS_HMC5843_I2C is not set
-# CONFIG_SENSORS_HMC5843_SPI is not set
-# CONFIG_SENSORS_HTU21 is not set
-# CONFIG_SENSORS_I5500 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_IBM_CFFPS is not set
-# CONFIG_SENSORS_IIO_HWMON is not set
-# CONFIG_SENSORS_INA209 is not set
-# CONFIG_SENSORS_INA2XX is not set
-# CONFIG_SENSORS_INA3221 is not set
-# CONFIG_SENSORS_INSPUR_IPSPS is not set
-# CONFIG_SENSORS_IR35221 is not set
-# CONFIG_SENSORS_IR38064 is not set
-# CONFIG_SENSORS_IRPS5401 is not set
-# CONFIG_SENSORS_ISL29018 is not set
-# CONFIG_SENSORS_ISL29028 is not set
-# CONFIG_SENSORS_ISL68137 is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_JC42 is not set
-# CONFIG_SENSORS_K10TEMP is not set
-# CONFIG_SENSORS_K8TEMP is not set
-# CONFIG_SENSORS_LINEAGE is not set
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LM25066 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LM95234 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_LM95245 is not set
-# CONFIG_SENSORS_LTC2945 is not set
-# CONFIG_SENSORS_LTC2978 is not set
-# CONFIG_SENSORS_LTC2990 is not set
-# CONFIG_SENSORS_LTC3815 is not set
-# CONFIG_SENSORS_LTC4151 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4222 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LTC4260 is not set
-# CONFIG_SENSORS_LTC4261 is not set
-# CONFIG_SENSORS_LTQ_CPUTEMP is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX16064 is not set
-# CONFIG_SENSORS_MAX16065 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX1668 is not set
-# CONFIG_SENSORS_MAX197 is not set
-# CONFIG_SENSORS_MAX20751 is not set
-# CONFIG_SENSORS_MAX31722 is not set
-# CONFIG_SENSORS_MAX31785 is not set
-# CONFIG_SENSORS_MAX31790 is not set
-# CONFIG_SENSORS_MAX34440 is not set
-# CONFIG_SENSORS_MAX6621 is not set
-# CONFIG_SENSORS_MAX6639 is not set
-# CONFIG_SENSORS_MAX6642 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_MAX6697 is not set
-# CONFIG_SENSORS_MAX8688 is not set
-# CONFIG_SENSORS_MCP3021 is not set
-# CONFIG_SENSORS_NCT6683 is not set
-# CONFIG_SENSORS_NCT6775 is not set
-# CONFIG_SENSORS_NCT7802 is not set
-# CONFIG_SENSORS_NCT7904 is not set
-# CONFIG_SENSORS_NPCM7XX is not set
-# CONFIG_SENSORS_NSA320 is not set
-# CONFIG_SENSORS_NTC_THERMISTOR is not set
-# CONFIG_SENSORS_OCC_P8_I2C is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_PMBUS is not set
-# CONFIG_SENSORS_POWR1220 is not set
-# CONFIG_SENSORS_PWM_FAN is not set
-# CONFIG_SENSORS_PXE1610 is not set
-# CONFIG_SENSORS_RM3100_I2C is not set
-# CONFIG_SENSORS_RM3100_SPI is not set
-# CONFIG_SENSORS_SCH5627 is not set
-# CONFIG_SENSORS_SCH5636 is not set
-# CONFIG_SENSORS_SCH56XX_COMMON is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SHT21 is not set
-# CONFIG_SENSORS_SHT3x is not set
-# CONFIG_SENSORS_SHTC1 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMM665 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_STTS751 is not set
-# CONFIG_SENSORS_TC654 is not set
-# CONFIG_SENSORS_TC74 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP102 is not set
-# CONFIG_SENSORS_TMP103 is not set
-# CONFIG_SENSORS_TMP108 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_TPS40422 is not set
-# CONFIG_SENSORS_TPS53679 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_SENSORS_TSL2563 is not set
-# CONFIG_SENSORS_UCD9000 is not set
-# CONFIG_SENSORS_UCD9200 is not set
-# CONFIG_SENSORS_VEXPRESS is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VIA_CPUTEMP is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83773G is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83795 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_XGENE is not set
-# CONFIG_SENSORS_ZL6100 is not set
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_ASPEED_VUART is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-CONFIG_SERIAL_8250_DMA=y
-# CONFIG_SERIAL_8250_DW is not set
-# CONFIG_SERIAL_8250_EM is not set
-# CONFIG_SERIAL_8250_EXAR is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SERIAL_8250_FINTEK is not set
-# CONFIG_SERIAL_8250_FOURPORT is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
-# CONFIG_SERIAL_8250_INGENIC is not set
-# CONFIG_SERIAL_8250_LPSS is not set
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_MID is not set
-# CONFIG_SERIAL_8250_MOXA is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_SERIAL_8250_RSA is not set
-# CONFIG_SERIAL_8250_RT288X is not set
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-# CONFIG_SERIAL_ARC is not set
-# CONFIG_SERIAL_BCM63XX is not set
-# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_DEV_BUS is not set
-CONFIG_SERIAL_EARLYCON=y
-# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
-# CONFIG_SERIAL_FSL_LINFLEXUART is not set
-# CONFIG_SERIAL_FSL_LPUART is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-# CONFIG_SERIAL_IFX6X60 is not set
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX310X is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_PCH_UART is not set
-# CONFIG_SERIAL_RP2 is not set
-# CONFIG_SERIAL_SC16IS7XX is not set
-# CONFIG_SERIAL_SCCNXP is not set
-# CONFIG_SERIAL_SH_SCI is not set
-# CONFIG_SERIAL_SIFIVE is not set
-# CONFIG_SERIAL_STM32 is not set
-# CONFIG_SERIAL_ST_ASC is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_UARTLITE is not set
-# CONFIG_SERIAL_XILINX_PS_UART is not set
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_APBPS2 is not set
-# CONFIG_SERIO_ARC_PS2 is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_GPIO_PS2 is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_PS2MULT is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_SUN4I_PS2 is not set
-# CONFIG_SFC is not set
-# CONFIG_SFC_FALCON is not set
-# CONFIG_SFI is not set
-# CONFIG_SFP is not set
-# CONFIG_SGETMASK_SYSCALL is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_SG_POOL is not set
-# CONFIG_SG_SPLIT is not set
-CONFIG_SHMEM=y
-# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
-# CONFIG_SH_ETH is not set
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_SH_TIMER_MTU2 is not set
-# CONFIG_SH_TIMER_TMU is not set
-# CONFIG_SI1133 is not set
-# CONFIG_SI1145 is not set
-# CONFIG_SI7005 is not set
-# CONFIG_SI7020 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SIGNALFD=y
-# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_SIMPLE_PM_BUS is not set
-# CONFIG_SIOX is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLABINFO=y
-# CONFIG_SLAB_FREELIST_HARDENED is not set
-# CONFIG_SLAB_FREELIST_RANDOM is not set
-CONFIG_SLAB_MERGE_DEFAULT=y
-# CONFIG_SLHC is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_SLIMBUS is not set
-# CONFIG_SLIP is not set
-# CONFIG_SLOB is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_CPU_PARTIAL=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_SMARTJOYPLUS_FF is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMC9194 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMP is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_SND is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-# CONFIG_SND_AD1816A is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ALOOP is not set
-# CONFIG_SND_ALS100 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_ASIHPI is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_ATMEL_AC97C is not set
-# CONFIG_SND_ATMEL_SOC is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AUDIO_GRAPH_CARD is not set
-# CONFIG_SND_AUDIO_GRAPH_SCU_CARD is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT2320 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BCD2000 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_DESIGNWARE_I2S is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_EDMA_SOC is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FIREWIRE is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDA_INTEL_DETECT_DMIC is not set
-CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
-CONFIG_SND_HDA_PREALLOC_SIZE=64
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_HWDEP is not set
-# CONFIG_SND_I2S_HI6210_I2S is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_ISA is not set
-# CONFIG_SND_JZ4740_SOC_I2S is not set
-# CONFIG_SND_KIRKWOOD_SOC is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_LOLA is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-CONFIG_SND_MAX_CARDS=16
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_MIPS is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MPC52xx_SOC_EFIKA is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_MTS64 is not set
-# CONFIG_SND_MXS_SOC is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-CONFIG_SND_OSSEMUL=y
-# CONFIG_SND_OXYGEN is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_PCM is not set
-# CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_PCM_OSS is not set
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_PCM_TIMER is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_PORTMAN2X4 is not set
-# CONFIG_SND_POWERPC_SOC is not set
-# CONFIG_SND_PPC is not set
-CONFIG_SND_PROC_FS=y
-# CONFIG_SND_RAWMIDI is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_SE6X is not set
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_SIMPLE_CARD is not set
-# CONFIG_SND_SIMPLE_SCU_CARD is not set
-# CONFIG_SND_SIS7019 is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_ADAU1701 is not set
-# CONFIG_SND_SOC_ADAU1761_I2C is not set
-# CONFIG_SND_SOC_ADAU1761_SPI is not set
-# CONFIG_SND_SOC_ADAU7002 is not set
-# CONFIG_SND_SOC_AK4104 is not set
-# CONFIG_SND_SOC_AK4118 is not set
-# CONFIG_SND_SOC_AK4458 is not set
-# CONFIG_SND_SOC_AK4554 is not set
-# CONFIG_SND_SOC_AK4613 is not set
-# CONFIG_SND_SOC_AK4642 is not set
-# CONFIG_SND_SOC_AK5386 is not set
-# CONFIG_SND_SOC_AK5558 is not set
-# CONFIG_SND_SOC_ALC5623 is not set
-# CONFIG_SND_SOC_AMD_ACP is not set
-# CONFIG_SND_SOC_AMD_ACP3x is not set
-# CONFIG_SND_SOC_AU1XAUDIO is not set
-# CONFIG_SND_SOC_AU1XPSC is not set
-# CONFIG_SND_SOC_BD28623 is not set
-# CONFIG_SND_SOC_BT_SCO is not set
-# CONFIG_SND_SOC_CS35L32 is not set
-# CONFIG_SND_SOC_CS35L33 is not set
-# CONFIG_SND_SOC_CS35L34 is not set
-# CONFIG_SND_SOC_CS35L35 is not set
-# CONFIG_SND_SOC_CS35L36 is not set
-# CONFIG_SND_SOC_CS4265 is not set
-# CONFIG_SND_SOC_CS4270 is not set
-# CONFIG_SND_SOC_CS4271 is not set
-# CONFIG_SND_SOC_CS4271_I2C is not set
-# CONFIG_SND_SOC_CS4271_SPI is not set
-# CONFIG_SND_SOC_CS42L42 is not set
-# CONFIG_SND_SOC_CS42L51_I2C is not set
-# CONFIG_SND_SOC_CS42L52 is not set
-# CONFIG_SND_SOC_CS42L56 is not set
-# CONFIG_SND_SOC_CS42L73 is not set
-# CONFIG_SND_SOC_CS42XX8_I2C is not set
-# CONFIG_SND_SOC_CS43130 is not set
-# CONFIG_SND_SOC_CS4341 is not set
-# CONFIG_SND_SOC_CS4349 is not set
-# CONFIG_SND_SOC_CS53L30 is not set
-# CONFIG_SND_SOC_CX2072X is not set
-# CONFIG_SND_SOC_DIO2125 is not set
-# CONFIG_SND_SOC_DMIC is not set
-# CONFIG_SND_SOC_ES7134 is not set
-# CONFIG_SND_SOC_ES7241 is not set
-# CONFIG_SND_SOC_ES8316 is not set
-# CONFIG_SND_SOC_ES8328 is not set
-# CONFIG_SND_SOC_ES8328_I2C is not set
-# CONFIG_SND_SOC_ES8328_SPI is not set
-# CONFIG_SND_SOC_EUKREA_TLV320 is not set
-# CONFIG_SND_SOC_FSL_ASOC_CARD is not set
-# CONFIG_SND_SOC_FSL_ASRC is not set
-# CONFIG_SND_SOC_FSL_AUDMIX is not set
-# CONFIG_SND_SOC_FSL_ESAI is not set
-# CONFIG_SND_SOC_FSL_MICFIL is not set
-# CONFIG_SND_SOC_FSL_SAI is not set
-# CONFIG_SND_SOC_FSL_SPDIF is not set
-# CONFIG_SND_SOC_FSL_SSI is not set
-# CONFIG_SND_SOC_GTM601 is not set
-# CONFIG_SND_SOC_ICS43432 is not set
-# CONFIG_SND_SOC_IMG is not set
-# CONFIG_SND_SOC_IMX_AUDMIX is not set
-# CONFIG_SND_SOC_IMX_AUDMUX is not set
-# CONFIG_SND_SOC_IMX_ES8328 is not set
-# CONFIG_SND_SOC_IMX_SPDIF is not set
-# CONFIG_SND_SOC_IMX_WM8962 is not set
-# CONFIG_SND_SOC_INNO_RK3036 is not set
-# CONFIG_SND_SOC_INTEL_APL is not set
-# CONFIG_SND_SOC_INTEL_BAYTRAIL is not set
-# CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH is not set
-# CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH is not set
-# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH is not set
-# CONFIG_SND_SOC_INTEL_CFL is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH is not set
-# CONFIG_SND_SOC_INTEL_CML_H is not set
-# CONFIG_SND_SOC_INTEL_CML_LP is not set
-# CONFIG_SND_SOC_INTEL_CNL is not set
-# CONFIG_SND_SOC_INTEL_GLK is not set
-# CONFIG_SND_SOC_INTEL_HASWELL is not set
-# CONFIG_SND_SOC_INTEL_KBL is not set
-# CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH is not set
-# CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL is not set
-# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKYLAKE is not set
-# CONFIG_SND_SOC_INTEL_SST is not set
-CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
-# CONFIG_SND_SOC_JZ4725B_CODEC is not set
-# CONFIG_SND_SOC_JZ4740_CODEC is not set
-# CONFIG_SND_SOC_MA120X0P is not set
-# CONFIG_SND_SOC_MAX9759 is not set
-# CONFIG_SND_SOC_MAX98088 is not set
-# CONFIG_SND_SOC_MAX98357A is not set
-# CONFIG_SND_SOC_MAX98373 is not set
-# CONFIG_SND_SOC_MAX98504 is not set
-# CONFIG_SND_SOC_MAX9860 is not set
-# CONFIG_SND_SOC_MAX9867 is not set
-# CONFIG_SND_SOC_MAX98927 is not set
-# CONFIG_SND_SOC_MEDIATEK is not set
-# CONFIG_SND_SOC_MPC5200_AC97 is not set
-# CONFIG_SND_SOC_MPC5200_I2S is not set
-# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
-# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
-# CONFIG_SND_SOC_MT2701 is not set
-# CONFIG_SND_SOC_MT6351 is not set
-# CONFIG_SND_SOC_MT6358 is not set
-# CONFIG_SND_SOC_MT8173 is not set
-# CONFIG_SND_SOC_MTK_BTCVSD is not set
-# CONFIG_SND_SOC_NAU8540 is not set
-# CONFIG_SND_SOC_NAU8810 is not set
-# CONFIG_SND_SOC_NAU8822 is not set
-# CONFIG_SND_SOC_NAU8824 is not set
-# CONFIG_SND_SOC_PCM1681 is not set
-# CONFIG_SND_SOC_PCM1789_I2C is not set
-# CONFIG_SND_SOC_PCM1792A is not set
-# CONFIG_SND_SOC_PCM179X_I2C is not set
-# CONFIG_SND_SOC_PCM179X_SPI is not set
-# CONFIG_SND_SOC_PCM186X_I2C is not set
-# CONFIG_SND_SOC_PCM186X_SPI is not set
-# CONFIG_SND_SOC_PCM3060_I2C is not set
-# CONFIG_SND_SOC_PCM3060_SPI is not set
-# CONFIG_SND_SOC_PCM3168A_I2C is not set
-# CONFIG_SND_SOC_PCM3168A_SPI is not set
-# CONFIG_SND_SOC_PCM512x_I2C is not set
-# CONFIG_SND_SOC_PCM512x_SPI is not set
-# CONFIG_SND_SOC_QCOM is not set
-# CONFIG_SND_SOC_RK3328 is not set
-# CONFIG_SND_SOC_RT5616 is not set
-# CONFIG_SND_SOC_RT5631 is not set
-# CONFIG_SND_SOC_RT5677_SPI is not set
-# CONFIG_SND_SOC_SGTL5000 is not set
-# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
-# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
-# CONFIG_SND_SOC_SOF_TOPLEVEL is not set
-# CONFIG_SND_SOC_SPDIF is not set
-# CONFIG_SND_SOC_SSM2305 is not set
-# CONFIG_SND_SOC_SSM2602_I2C is not set
-# CONFIG_SND_SOC_SSM2602_SPI is not set
-# CONFIG_SND_SOC_SSM4567 is not set
-# CONFIG_SND_SOC_STA32X is not set
-# CONFIG_SND_SOC_STA350 is not set
-# CONFIG_SND_SOC_STI_SAS is not set
-# CONFIG_SND_SOC_TAS2552 is not set
-# CONFIG_SND_SOC_TAS5086 is not set
-# CONFIG_SND_SOC_TAS571X is not set
-# CONFIG_SND_SOC_TAS5720 is not set
-# CONFIG_SND_SOC_TAS6424 is not set
-# CONFIG_SND_SOC_TDA7419 is not set
-# CONFIG_SND_SOC_TFA9879 is not set
-# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
-# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
-# CONFIG_SND_SOC_TLV320AIC31XX is not set
-# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
-# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set
-# CONFIG_SND_SOC_TLV320AIC3X is not set
-# CONFIG_SND_SOC_TPA6130A2 is not set
-# CONFIG_SND_SOC_TS3A227E is not set
-# CONFIG_SND_SOC_TSCS42XX is not set
-# CONFIG_SND_SOC_TSCS454 is not set
-# CONFIG_SND_SOC_UDA1334 is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8523 is not set
-# CONFIG_SND_SOC_WM8524 is not set
-# CONFIG_SND_SOC_WM8580 is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8728 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8737 is not set
-# CONFIG_SND_SOC_WM8741 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8770 is not set
-# CONFIG_SND_SOC_WM8776 is not set
-# CONFIG_SND_SOC_WM8782 is not set
-# CONFIG_SND_SOC_WM8804_I2C is not set
-# CONFIG_SND_SOC_WM8804_SPI is not set
-# CONFIG_SND_SOC_WM8903 is not set
-# CONFIG_SND_SOC_WM8904 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8962 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8978 is not set
-# CONFIG_SND_SOC_WM8985 is not set
-# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set
-# CONFIG_SND_SOC_XILINX_I2S is not set
-# CONFIG_SND_SOC_XILINX_SPDIF is not set
-# CONFIG_SND_SOC_XTFPGA_I2S is not set
-# CONFIG_SND_SOC_ZX_AUD96P22 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI is not set
-# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI is not set
-# CONFIG_SND_SUN4I_CODEC is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_TIMER is not set
-# CONFIG_SND_TRIDENT is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_6FIRE is not set
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_USB_HIFACE is not set
-# CONFIG_SND_USB_POD is not set
-# CONFIG_SND_USB_PODHD is not set
-# CONFIG_SND_USB_TONEPORT is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_US122L is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_VARIAX is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_WAVEFRONT is not set
-CONFIG_SND_X86=y
-# CONFIG_SND_XEN_FRONTEND is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set
-# CONFIG_SOCK_CGROUP_DATA is not set
-# CONFIG_SOC_AM33XX is not set
-# CONFIG_SOC_AM43XX is not set
-# CONFIG_SOC_BRCMSTB is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_SOC_DRA7XX is not set
-# CONFIG_SOC_HAS_OMAP2_SDRC is not set
-# CONFIG_SOC_OMAP5 is not set
-# CONFIG_SOC_TI is not set
-# CONFIG_SOFTLOCKUP_DETECTOR is not set
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_SONYPI is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_SOUND is not set
-# CONFIG_SOUNDWIRE is not set
-# CONFIG_SOUND_OSS_CORE is not set
-# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_SP5100_TCO is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-# CONFIG_SPARSE_IRQ is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_SPEAKUP is not set
-# CONFIG_SPI is not set
-# CONFIG_SPINLOCK_TEST is not set
-# CONFIG_SPI_ALTERA is not set
-# CONFIG_SPI_AU1550 is not set
-# CONFIG_SPI_AXI_SPI_ENGINE is not set
-# CONFIG_SPI_BCM2835 is not set
-# CONFIG_SPI_BCM_QSPI is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_BUTTERFLY is not set
-# CONFIG_SPI_CADENCE is not set
-# CONFIG_SPI_CADENCE_QUADSPI is not set
-# CONFIG_SPI_DEBUG is not set
-# CONFIG_SPI_DESIGNWARE is not set
-# CONFIG_SPI_FSL_DSPI is not set
-# CONFIG_SPI_FSL_ESPI is not set
-# CONFIG_SPI_FSL_SPI is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_GPIO_OLD is not set
-# CONFIG_SPI_IMG_SPFI is not set
-# CONFIG_SPI_LM70_LLP is not set
-# CONFIG_SPI_LOOPBACK_TEST is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_SPI_MEM is not set
-# CONFIG_SPI_MPC52xx is not set
-# CONFIG_SPI_MPC52xx_PSC is not set
-# CONFIG_SPI_MTK_QUADSPI is not set
-# CONFIG_SPI_MXIC is not set
-# CONFIG_SPI_NXP_FLEXSPI is not set
-# CONFIG_SPI_OCTEON is not set
-# CONFIG_SPI_OC_TINY is not set
-# CONFIG_SPI_ORION is not set
-# CONFIG_SPI_PL022 is not set
-# CONFIG_SPI_PPC4xx is not set
-# CONFIG_SPI_PXA2XX is not set
-# CONFIG_SPI_PXA2XX_PCI is not set
-# CONFIG_SPI_QCOM_QSPI is not set
-# CONFIG_SPI_ROCKCHIP is not set
-# CONFIG_SPI_S3C64XX is not set
-# CONFIG_SPI_SC18IS602 is not set
-# CONFIG_SPI_SIFIVE is not set
-# CONFIG_SPI_SLAVE is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_THUNDERX is not set
-# CONFIG_SPI_TI_QSPI is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_SPI_TOPCLIFF_PCH is not set
-# CONFIG_SPI_XCOMM is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_XWAY is not set
-# CONFIG_SPI_ZYNQMP_GQSPI is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_SPMI is not set
-# CONFIG_SPS30 is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
-# CONFIG_SQUASHFS_DECOMP_MULTI is not set
-CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
-# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
-CONFIG_SQUASHFS_EMBEDDED=y
-# CONFIG_SQUASHFS_FILE_CACHE is not set
-CONFIG_SQUASHFS_FILE_DIRECT=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_SQUASHFS_LZ4 is not set
-# CONFIG_SQUASHFS_LZO is not set
-# CONFIG_SQUASHFS_XATTR is not set
-CONFIG_SQUASHFS_XZ=y
-# CONFIG_SQUASHFS_ZLIB is not set
-# CONFIG_SQUASHFS_ZSTD is not set
-# CONFIG_SRAM is not set
-# CONFIG_SRF04 is not set
-# CONFIG_SRF08 is not set
-# CONFIG_SSB is not set
-# CONFIG_SSB_DEBUG is not set
-# CONFIG_SSB_DRIVER_GPIO is not set
-# CONFIG_SSB_HOST_SOC is not set
-# CONFIG_SSB_PCMCIAHOST is not set
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB_SDIOHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSFDC is not set
-# CONFIG_STACKPROTECTOR is not set
-# CONFIG_STACKPROTECTOR_STRONG is not set
-# CONFIG_STACKTRACE is not set
-CONFIG_STACKTRACE_SUPPORT=y
-# CONFIG_STACK_TRACER is not set
-# CONFIG_STACK_VALIDATION is not set
-CONFIG_STAGING=y
-# CONFIG_STAGING_BOARD is not set
-# CONFIG_STAGING_GASKET_FRAMEWORK is not set
-# CONFIG_STAGING_MEDIA is not set
-CONFIG_STANDALONE=y
-# CONFIG_STATIC_KEYS_SELFTEST is not set
-# CONFIG_STATIC_USERMODEHELPER is not set
-CONFIG_STDBINUTILS=y
-# CONFIG_STE10XP is not set
-# CONFIG_STE_MODEM_RPROC is not set
-# CONFIG_STK3310 is not set
-# CONFIG_STK8312 is not set
-# CONFIG_STK8BA50 is not set
-# CONFIG_STM is not set
-# CONFIG_STMMAC_ETH is not set
-# CONFIG_STMMAC_PCI is not set
-# CONFIG_STMMAC_PLATFORM is not set
-# CONFIG_STM_DUMMY is not set
-# CONFIG_STM_SOURCE_CONSOLE is not set
-CONFIG_STP=y
-# CONFIG_STREAM_PARSER is not set
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_STRICT_KERNEL_RWX=y
-CONFIG_STRICT_MODULE_RWX=y
-# CONFIG_STRING_SELFTEST is not set
-CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_STX104 is not set
-# CONFIG_ST_UVIS25 is not set
-# CONFIG_SUN4I_GPADC is not set
-# CONFIG_SUN50I_DE2_BUS is not set
-# CONFIG_SUN50I_ERRATUM_UNKNOWN1 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_SUNRPC_DEBUG is not set
-CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SUNXI_SRAM is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_SURFACE_3_BUTTON is not set
-# CONFIG_SUSPEND is not set
-# CONFIG_SUSPEND_SKIP_SYNC is not set
-CONFIG_SWAP=y
-# CONFIG_SWCONFIG is not set
-# CONFIG_SWCONFIG_B53 is not set
-# CONFIG_SWCONFIG_B53_MDIO_DRIVER is not set
-# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
-# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set
-# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
-# CONFIG_SWCONFIG_LEDS is not set
-# CONFIG_SW_SYNC is not set
-# CONFIG_SX9500 is not set
-# CONFIG_SXGBE_ETH is not set
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_SYNC_FILE is not set
-# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_SYSCON_REBOOT_MODE is not set
-CONFIG_SYSCTL=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_SYSFS=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_SYSFS_SYSCALL is not set
-# CONFIG_SYSTEMPORT is not set
-# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
-# CONFIG_SYSTEM_DATA_VERIFICATION is not set
-# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
-CONFIG_SYSTEM_TRUSTED_KEYS=""
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_T5403 is not set
-# CONFIG_TARGET_CORE is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_TASKS_RCU is not set
-# CONFIG_TASK_XACCT is not set
-# CONFIG_TC35815 is not set
-# CONFIG_TCG_ATMEL is not set
-# CONFIG_TCG_CRB is not set
-# CONFIG_TCG_FTPM_TEE is not set
-# CONFIG_TCG_INFINEON is not set
-# CONFIG_TCG_NSC is not set
-# CONFIG_TCG_ST33_I2C is not set
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_TIS_I2C_ATMEL is not set
-# CONFIG_TCG_TIS_I2C_INFINEON is not set
-# CONFIG_TCG_TIS_I2C_NUVOTON is not set
-# CONFIG_TCG_TIS_SPI is not set
-# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
-# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_TCG_VTPM_PROXY is not set
-# CONFIG_TCG_XEN is not set
-# CONFIG_TCIC is not set
-CONFIG_TCP_CONG_ADVANCED=y
-# CONFIG_TCP_CONG_BBR is not set
-# CONFIG_TCP_CONG_BIC is not set
-# CONFIG_TCP_CONG_CDG is not set
-CONFIG_TCP_CONG_CUBIC=y
-# CONFIG_TCP_CONG_DCTCP is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_NV is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_WESTWOOD is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_TCS3414 is not set
-# CONFIG_TCS3472 is not set
-# CONFIG_TEE is not set
-# CONFIG_TEGRA_AHB is not set
-# CONFIG_TEGRA_HOST1X is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TERANETICS_PHY is not set
-# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
-# CONFIG_TEST_BITFIELD is not set
-# CONFIG_TEST_BITMAP is not set
-# CONFIG_TEST_BLACKHOLE_DEV is not set
-# CONFIG_TEST_BPF is not set
-# CONFIG_TEST_FIRMWARE is not set
-# CONFIG_TEST_HASH is not set
-# CONFIG_TEST_HEXDUMP is not set
-# CONFIG_TEST_IDA is not set
-# CONFIG_TEST_KMOD is not set
-# CONFIG_TEST_KSTRTOX is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_TEST_LKM is not set
-# CONFIG_TEST_MEMCAT_P is not set
-# CONFIG_TEST_MEMINIT is not set
-# CONFIG_TEST_OVERFLOW is not set
-# CONFIG_TEST_POWER is not set
-# CONFIG_TEST_PRINTF is not set
-# CONFIG_TEST_RHASHTABLE is not set
-# CONFIG_TEST_SORT is not set
-# CONFIG_TEST_STACKINIT is not set
-# CONFIG_TEST_STATIC_KEYS is not set
-# CONFIG_TEST_STRING_HELPERS is not set
-# CONFIG_TEST_STRSCPY is not set
-# CONFIG_TEST_SYSCTL is not set
-# CONFIG_TEST_UBSAN is not set
-# CONFIG_TEST_UDELAY is not set
-# CONFIG_TEST_USER_COPY is not set
-# CONFIG_TEST_UUID is not set
-# CONFIG_TEST_VMALLOC is not set
-# CONFIG_TEST_XARRAY is not set
-CONFIG_TEXTSEARCH=y
-# CONFIG_TEXTSEARCH_BM is not set
-# CONFIG_TEXTSEARCH_FSM is not set
-# CONFIG_TEXTSEARCH_KMP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
-# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
-# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_EMULATION is not set
-# CONFIG_THERMAL_GOV_BANG_BANG is not set
-# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
-# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
-# CONFIG_THERMAL_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_THERMAL_MMIO is not set
-# CONFIG_THERMAL_STATISTICS is not set
-# CONFIG_THERMAL_WRITABLE_TRIPS is not set
-# CONFIG_THINKPAD_ACPI is not set
-CONFIG_THIN_ARCHIVES=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_THUMB2_KERNEL is not set
-# CONFIG_THUNDERBOLT is not set
-# CONFIG_THUNDER_NIC_BGX is not set
-# CONFIG_THUNDER_NIC_PF is not set
-# CONFIG_THUNDER_NIC_RGX is not set
-# CONFIG_THUNDER_NIC_VF is not set
-# CONFIG_TICK_CPU_ACCOUNTING is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_TIFM_CORE is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_TIMB_DMA is not set
-CONFIG_TIMERFD=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_TINYDRM_HX8357D is not set
-# CONFIG_TINYDRM_ILI9225 is not set
-# CONFIG_TINYDRM_ILI9341 is not set
-# CONFIG_TINYDRM_MI0283QT is not set
-# CONFIG_TINYDRM_REPAPER is not set
-# CONFIG_TINYDRM_ST7586 is not set
-# CONFIG_TINYDRM_ST7735R is not set
-CONFIG_TINY_RCU=y
-# CONFIG_TIPC is not set
-# CONFIG_TI_ADC081C is not set
-# CONFIG_TI_ADC0832 is not set
-# CONFIG_TI_ADC084S021 is not set
-# CONFIG_TI_ADC108S102 is not set
-# CONFIG_TI_ADC12138 is not set
-# CONFIG_TI_ADC128S052 is not set
-# CONFIG_TI_ADC161S626 is not set
-# CONFIG_TI_ADS1015 is not set
-# CONFIG_TI_ADS124S08 is not set
-# CONFIG_TI_ADS7950 is not set
-# CONFIG_TI_ADS8344 is not set
-# CONFIG_TI_ADS8688 is not set
-# CONFIG_TI_AM335X_ADC is not set
-# CONFIG_TI_CPSW is not set
-# CONFIG_TI_CPSW_ALE is not set
-# CONFIG_TI_CPSW_PHY_SEL is not set
-# CONFIG_TI_CPTS is not set
-# CONFIG_TI_DAC082S085 is not set
-# CONFIG_TI_DAC5571 is not set
-# CONFIG_TI_DAC7311 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_TI_DAC7612 is not set
-# CONFIG_TI_DAVINCI_CPDMA is not set
-# CONFIG_TI_DAVINCI_MDIO is not set
-# CONFIG_TI_ST is not set
-# CONFIG_TI_SYSCON_RESET is not set
-# CONFIG_TI_TLC4541 is not set
-# CONFIG_TLAN is not set
-# CONFIG_TLS is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_TMP006 is not set
-# CONFIG_TMP007 is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TOPSTAR_LAPTOP is not set
-# CONFIG_TORTURE_TEST is not set
-# CONFIG_TOSHIBA_HAPS is not set
-# CONFIG_TOUCHSCREEN_88PM860X is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_ADC is not set
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_BU21029 is not set
-# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
-# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
-# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
-# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set
-# CONFIG_TOUCHSCREEN_DA9034 is not set
-# CONFIG_TOUCHSCREEN_DA9052 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_EGALAX is not set
-# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
-# CONFIG_TOUCHSCREEN_EKTF2127 is not set
-# CONFIG_TOUCHSCREEN_ELAN is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_EXC3000 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GOODIX is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_HIDEEP is not set
-# CONFIG_TOUCHSCREEN_HP600 is not set
-# CONFIG_TOUCHSCREEN_HP7XX is not set
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
-# CONFIG_TOUCHSCREEN_ILI210X is not set
-# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_IPAQ_MICRO is not set
-# CONFIG_TOUCHSCREEN_IPROC is not set
-# CONFIG_TOUCHSCREEN_IQS5XX is not set
-# CONFIG_TOUCHSCREEN_LPC32XX is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_MC13783 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
-# CONFIG_TOUCHSCREEN_MIGOR is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_MMS114 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MX25 is not set
-# CONFIG_TOUCHSCREEN_MXS_LRADC is not set
-# CONFIG_TOUCHSCREEN_PCAP is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_PROPERTIES is not set
-# CONFIG_TOUCHSCREEN_RASPBERRYPI_FW is not set
-# CONFIG_TOUCHSCREEN_RM_TS is not set
-# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
-# CONFIG_TOUCHSCREEN_RPI_FT5406 is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_S6SY761 is not set
-# CONFIG_TOUCHSCREEN_SILEAD is not set
-# CONFIG_TOUCHSCREEN_SIS_I2C is not set
-# CONFIG_TOUCHSCREEN_ST1232 is not set
-# CONFIG_TOUCHSCREEN_STMFTS is not set
-# CONFIG_TOUCHSCREEN_STMPE is not set
-# CONFIG_TOUCHSCREEN_SUN4I is not set
-# CONFIG_TOUCHSCREEN_SUR40 is not set
-# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
-# CONFIG_TOUCHSCREEN_SX8654 is not set
-# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TPS6507X is not set
-# CONFIG_TOUCHSCREEN_TS4800 is not set
-# CONFIG_TOUCHSCREEN_TSC2004 is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
-# CONFIG_TOUCHSCREEN_TSC200X_CORE is not set
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_3M is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
-# CONFIG_TOUCHSCREEN_USB_E2I is not set
-# CONFIG_TOUCHSCREEN_USB_EASYTOUCH is not set
-# CONFIG_TOUCHSCREEN_USB_EGALAX is not set
-# CONFIG_TOUCHSCREEN_USB_ELO is not set
-# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
-# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
-# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
-# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
-# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
-# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
-# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
-# CONFIG_TOUCHSCREEN_USB_ITM is not set
-# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
-# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
-# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
-# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
-# CONFIG_TOUCHSCREEN_WM831X is not set
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-# CONFIG_TOUCHSCREEN_WM9712 is not set
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE is not set
-# CONFIG_TOUCHSCREEN_ZET6223 is not set
-# CONFIG_TOUCHSCREEN_ZFORCE is not set
-# CONFIG_TPL0102 is not set
-# CONFIG_TPS6105X is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TPS6507X is not set
-# CONFIG_TRACEPOINT_BENCHMARK is not set
-# CONFIG_TRACER_SNAPSHOT is not set
-# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_TRACE_EVAL_MAP_FILE is not set
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_TRACE_SINK is not set
-# CONFIG_TRACING_EVENTS_GPIO is not set
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_TRIM_UNUSED_KSYMS is not set
-# CONFIG_TRUSTED_FOUNDATIONS is not set
-# CONFIG_TRUSTED_KEYS is not set
-# CONFIG_TSL2583 is not set
-# CONFIG_TSL2772 is not set
-# CONFIG_TSL2x7x is not set
-# CONFIG_TSL4531 is not set
-# CONFIG_TSYS01 is not set
-# CONFIG_TSYS02D is not set
-# CONFIG_TTPCI_EEPROM is not set
-CONFIG_TTY=y
-# CONFIG_TTY_PRINTK is not set
-# CONFIG_TUN is not set
-# CONFIG_TUN_VNET_CROSS_LE is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_TWL4030_MADC is not set
-# CONFIG_TWL6030_GPADC is not set
-# CONFIG_TWL6040_CORE is not set
-# CONFIG_TYPEC is not set
-# CONFIG_TYPEC_TCPM is not set
-# CONFIG_TYPEC_UCSI is not set
-# CONFIG_TYPHOON is not set
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-# CONFIG_UBIFS_ATIME_SUPPORT is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-# CONFIG_UBIFS_FS_AUTHENTICATION is not set
-# CONFIG_UBIFS_FS_ENCRYPTION is not set
-CONFIG_UBIFS_FS_LZO=y
-# CONFIG_UBIFS_FS_SECURITY is not set
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UBIFS_FS_ZSTD=y
-# CONFIG_UBSAN is not set
-CONFIG_UBSAN_ALIGNMENT=y
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_UCSI is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDMABUF is not set
-CONFIG_UEVENT_HELPER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_UFS_FS is not set
-# CONFIG_UHID is not set
-CONFIG_UID16=y
-# CONFIG_UIO is not set
-# CONFIG_ULTRA is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_UNICODE is not set
-# CONFIG_UNISYSSPAR is not set
-# CONFIG_UNISYS_VISORBUS is not set
-CONFIG_UNIX=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_UNIX_DIAG is not set
-CONFIG_UNIX_SCM=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_UNWINDER_FRAME_POINTER is not set
-# CONFIG_UPROBES is not set
-# CONFIG_UPROBE_EVENTS is not set
-# CONFIG_US5182D is not set
-# CONFIG_USB is not set
-# CONFIG_USBIP_CORE is not set
-CONFIG_USBIP_VHCI_HC_PORTS=8
-CONFIG_USBIP_VHCI_NR_HCS=1
-# CONFIG_USBIP_VUDC is not set
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_ALI_M5632=y
-# CONFIG_USB_AMD5536UDC is not set
-CONFIG_USB_AN2720=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_ATM is not set
-CONFIG_USB_AUTOSUSPEND_DELAY=2
-# CONFIG_USB_BDC_UDC is not set
-CONFIG_USB_BELKIN=y
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_CDNS3 is not set
-# CONFIG_USB_CHAOSKEY is not set
-# CONFIG_USB_CHIPIDEA is not set
-# CONFIG_USB_CONFIGFS is not set
-# CONFIG_USB_CONN_GPIO is not set
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-CONFIG_USB_DEFAULT_PERSIST=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_DUMMY_HCD is not set
-# CONFIG_USB_DWC2 is not set
-# CONFIG_USB_DWC2_DEBUG is not set
-# CONFIG_USB_DWC2_DUAL_ROLE is not set
-# CONFIG_USB_DWC2_HOST is not set
-# CONFIG_USB_DWC2_PERIPHERAL is not set
-# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
-# CONFIG_USB_DWC3 is not set
-# CONFIG_USB_DWC3_EXYNOS is not set
-# CONFIG_USB_DWC3_HAPS is not set
-# CONFIG_USB_DWC3_KEYSTONE is not set
-# CONFIG_USB_DWC3_OF_SIMPLE is not set
-# CONFIG_USB_DWC3_PCI is not set
-# CONFIG_USB_DWC3_QCOM is not set
-# CONFIG_USB_DWC3_ULPI is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_EG20T is not set
-# CONFIG_USB_EHCI_ATH79 is not set
-# CONFIG_USB_EHCI_FSL is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD_AT91 is not set
-# CONFIG_USB_EHCI_HCD_OMAP is not set
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_EHCI_MSM is not set
-# CONFIG_USB_EHCI_MV is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_EHSET_TEST_FIXTURE is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_EZUSB_FX2 is not set
-# CONFIG_USB_FOTG210_HCD is not set
-# CONFIG_USB_FOTG210_UDC is not set
-# CONFIG_USB_FSL_USB2 is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_FUNCTIONFS is not set
-# CONFIG_USB_FUSB300 is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-CONFIG_USB_GADGET_VBUS_DRAW=2
-# CONFIG_USB_GADGET_XILINX is not set
-# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GOKU is not set
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_GR_UDC is not set
-# CONFIG_USB_GSPCA is not set
-# CONFIG_USB_GSPCA_BENQ is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_CPIA1 is not set
-# CONFIG_USB_GSPCA_DTCS033 is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_JL2005BCD is not set
-# CONFIG_USB_GSPCA_KINECT is not set
-# CONFIG_USB_GSPCA_KONICA is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_NW80X is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_OV534_9 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7302 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SE401 is not set
-# CONFIG_USB_GSPCA_SN9C2028 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA1528 is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_SQ930X is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_STK1135 is not set
-# CONFIG_USB_GSPCA_STV0680 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TOPRO is not set
-# CONFIG_USB_GSPCA_TOUPTEK is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_VICAM is not set
-# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_USB_G_ACM_MS is not set
-# CONFIG_USB_G_DBGP is not set
-# CONFIG_USB_G_HID is not set
-# CONFIG_USB_G_MULTI is not set
-# CONFIG_USB_G_NCM is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_G_WEBCAM is not set
-# CONFIG_USB_HCD_TEST_MODE is not set
-# CONFIG_USB_HID is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_HSIC_USB3503 is not set
-# CONFIG_USB_HSIC_USB4604 is not set
-# CONFIG_USB_HSO is not set
-# CONFIG_USB_HUB_USB251XB is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_IMX21_HCD is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1301 is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_ISP1760 is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_KC2190 is not set
-# CONFIG_USB_LAN78XX is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
-# CONFIG_USB_LED_TRIG is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LINK_LAYER_TEST is not set
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_MAX3421_HCD is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_MSM_OTG is not set
-# CONFIG_USB_MTU3 is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_MV_U3D is not set
-# CONFIG_USB_MV_UDC is not set
-# CONFIG_USB_MXS_PHY is not set
-# CONFIG_USB_NET2272 is not set
-# CONFIG_USB_NET2280 is not set
-# CONFIG_USB_NET_AQC111 is not set
-# CONFIG_USB_NET_AX88179_178A is not set
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_CDCETHER is not set
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_CDC_MBIM is not set
-# CONFIG_USB_NET_CDC_NCM is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_CH9200 is not set
-# CONFIG_USB_NET_CX82310_ETH is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_DRIVERS is not set
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_NET_KALMIA is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_QMI_WWAN is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_SR9700 is not set
-# CONFIG_USB_NET_SR9800 is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_OHCI_HCD_PCI is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_SSB is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_OTG_FSM is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_PCI is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_PHY is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_PWC_INPUT_EVDEV is not set
-# CONFIG_USB_PXA27X is not set
-# CONFIG_USB_R8A66597 is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_RCAR_PHY is not set
-# CONFIG_USB_RENESAS_USBHS is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_ROLES_INTEL_XHCI is not set
-# CONFIG_USB_ROLE_SWITCH is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_RTL8152 is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_F81232 is not set
-# CONFIG_USB_SERIAL_F8153X is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_METRO is not set
-# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MXUPORT is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QT2 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SIMPLE is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_SSU100 is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_UPD78F0730 is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_WISHBONE is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_XSENS_MT is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_SNP_UDC_PLAT is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_ENE_UB6250 is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_REALTEK is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_USB_SWITCH_FSA9480 is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_TMC is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_UAS is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_USB_ULPI_BUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USS720 is not set
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_VL600 is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-# CONFIG_USB_XHCI_DBGCAP is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_XHCI_MVEBU is not set
-# CONFIG_USB_XUSBATM is not set
-# CONFIG_USB_YUREX is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USELIB is not set
-# CONFIG_USERFAULTFD is not set
-# CONFIG_USERIO is not set
-# CONFIG_USE_OF is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_UWB is not set
-# CONFIG_U_SERIAL_CONSOLE is not set
-# CONFIG_V4L_MEM2MEM_DRIVERS is not set
-# CONFIG_V4L_TEST_DRIVERS is not set
-# CONFIG_VALIDATE_FS_PARSER is not set
-# CONFIG_VBOXGUEST is not set
-# CONFIG_VCNL4000 is not set
-# CONFIG_VCNL4035 is not set
-CONFIG_VDSO=y
-# CONFIG_VEML6070 is not set
-# CONFIG_VETH is not set
-# CONFIG_VEXPRESS_CONFIG is not set
-# CONFIG_VF610_ADC is not set
-# CONFIG_VF610_DAC is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_VFIO is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VGA_ARB is not set
-# CONFIG_VGA_SWITCHEROO is not set
-# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
-# CONFIG_VHOST_NET is not set
-# CONFIG_VHOST_VSOCK is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_ADV7183 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-# CONFIG_VIDEO_ADV7393 is not set
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_AK881X is not set
-# CONFIG_VIDEO_ASPEED is not set
-# CONFIG_VIDEO_ATMEL_ISC is not set
-# CONFIG_VIDEO_ATMEL_ISI is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_CADENCE is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-# CONFIG_VIDEO_CS3308 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_CX2341X is not set
-# CONFIG_VIDEO_CX25840 is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_DM6446_CCDC is not set
-# CONFIG_VIDEO_DT3155 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_GO7007 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_I2C is not set
-# CONFIG_VIDEO_IR_I2C is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_ML86V7667 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_MT9M111 is not set
-# CONFIG_VIDEO_MT9T112 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_MT9V111 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_NOON010PC30 is not set
-# CONFIG_VIDEO_OMAP2_VOUT is not set
-# CONFIG_VIDEO_OV2640 is not set
-# CONFIG_VIDEO_OV2659 is not set
-# CONFIG_VIDEO_OV5695 is not set
-# CONFIG_VIDEO_OV6650 is not set
-# CONFIG_VIDEO_OV7640 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_OV772X is not set
-# CONFIG_VIDEO_OV7740 is not set
-# CONFIG_VIDEO_OV9640 is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_RJ54N1 is not set
-# CONFIG_VIDEO_SAA6588 is not set
-# CONFIG_VIDEO_SAA6752HS is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_VIDEO_SONY_BTF_MPX is not set
-# CONFIG_VIDEO_SR030PC30 is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_THS8200 is not set
-# CONFIG_VIDEO_TIMBERDALE is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_TM6000 is not set
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_TW2804 is not set
-# CONFIG_VIDEO_TW9903 is not set
-# CONFIG_VIDEO_TW9906 is not set
-# CONFIG_VIDEO_TW9910 is not set
-# CONFIG_VIDEO_UDA1342 is not set
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_USBTV is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_VIDEO_V4L2 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-# CONFIG_VIDEO_VPX3220 is not set
-# CONFIG_VIDEO_VS6624 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIRTIO_BALLOON is not set
-# CONFIG_VIRTIO_BLK_SCSI is not set
-# CONFIG_VIRTIO_FS is not set
-# CONFIG_VIRTIO_INPUT is not set
-CONFIG_VIRTIO_MENU=y
-# CONFIG_VIRTIO_MMIO is not set
-# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
-# CONFIG_VIRT_DRIVERS is not set
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_VL53L0X_I2C is not set
-# CONFIG_VL6180 is not set
-CONFIG_VLAN_8021Q=y
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_VLAN_8021Q_MVRP is not set
-# CONFIG_VME_BUS is not set
-# CONFIG_VMSPLIT_1G is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMWARE_PVSCSI is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_VOP_BUS is not set
-# CONFIG_VORTEX is not set
-# CONFIG_VSOCKETS is not set
-# CONFIG_VSOCKETS_DIAG is not set
-# CONFIG_VT is not set
-# CONFIG_VT6655 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_VXGE is not set
-# CONFIG_VXLAN is not set
-# CONFIG_VZ89X is not set
-# CONFIG_W1 is not set
-# CONFIG_W1_CON is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_W1_MASTER_MATROX is not set
-# CONFIG_W1_MASTER_SGI is not set
-# CONFIG_W1_SLAVE_DS2405 is not set
-# CONFIG_W1_SLAVE_DS2406 is not set
-# CONFIG_W1_SLAVE_DS2408 is not set
-# CONFIG_W1_SLAVE_DS2413 is not set
-# CONFIG_W1_SLAVE_DS2423 is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2438 is not set
-# CONFIG_W1_SLAVE_DS250X is not set
-# CONFIG_W1_SLAVE_DS2780 is not set
-# CONFIG_W1_SLAVE_DS2781 is not set
-# CONFIG_W1_SLAVE_DS2805 is not set
-# CONFIG_W1_SLAVE_DS28E04 is not set
-# CONFIG_W1_SLAVE_DS28E17 is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_WAN is not set
-# CONFIG_WANXL is not set
-# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_CORE is not set
-CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-CONFIG_WATCHDOG_OPEN_TIMEOUT=0
-# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
-# CONFIG_WATCHDOG_SYSFS is not set
-# CONFIG_WD80x3 is not set
-# CONFIG_WDAT_WDT is not set
-# CONFIG_WDTPCI is not set
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PRIV=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WILINK_PLATFORM_DATA=y
-# CONFIG_WIMAX is not set
-# CONFIG_WIREGUARD is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_WDS is not set
-# CONFIG_WIZNET_W5100 is not set
-# CONFIG_WIZNET_W5300 is not set
-# CONFIG_WL1251 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_WL18XX is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_VENDOR_ADMTEK is not set
-# CONFIG_WLAN_VENDOR_ATH is not set
-# CONFIG_WLAN_VENDOR_ATMEL is not set
-# CONFIG_WLAN_VENDOR_BROADCOM is not set
-# CONFIG_WLAN_VENDOR_CISCO is not set
-# CONFIG_WLAN_VENDOR_INTEL is not set
-# CONFIG_WLAN_VENDOR_INTERSIL is not set
-# CONFIG_WLAN_VENDOR_MARVELL is not set
-# CONFIG_WLAN_VENDOR_MEDIATEK is not set
-# CONFIG_WLAN_VENDOR_QUANTENNA is not set
-# CONFIG_WLAN_VENDOR_RALINK is not set
-# CONFIG_WLAN_VENDOR_REALTEK is not set
-# CONFIG_WLAN_VENDOR_RSI is not set
-# CONFIG_WLAN_VENDOR_ST is not set
-# CONFIG_WLAN_VENDOR_TI is not set
-# CONFIG_WLAN_VENDOR_ZYDAS is not set
-# CONFIG_WLCORE is not set
-CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
-# CONFIG_WQ_WATCHDOG is not set
-# CONFIG_WW_MUTEX_SELFTEST is not set
-# CONFIG_X25 is not set
-# CONFIG_X509_CERTIFICATE_PARSER is not set
-# CONFIG_X86_PKG_TEMP_THERMAL is not set
-CONFIG_X86_SYSFB=y
-# CONFIG_XDP_SOCKETS is not set
-# CONFIG_XEN is not set
-# CONFIG_XEN_GRANT_DMA_ALLOC is not set
-# CONFIG_XEN_PVCALLS_FRONTEND is not set
-CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_INTERFACE is not set
-# CONFIG_XFRM_IPCOMP is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_ONLINE_SCRUB is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_WARN is not set
-# CONFIG_XILINX_AXI_EMAC is not set
-# CONFIG_XILINX_DMA is not set
-# CONFIG_XILINX_EMACLITE is not set
-# CONFIG_XILINX_GMII2RGMII is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_XILINX_SDFEC is not set
-# CONFIG_XILINX_VCU is not set
-# CONFIG_XILINX_WATCHDOG is not set
-# CONFIG_XILINX_XADC is not set
-# CONFIG_XILINX_ZYNQMP_DMA is not set
-# CONFIG_XILLYBUS is not set
-# CONFIG_XIL_AXIS_FIFO is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_XMON is not set
-CONFIG_XZ_DEC=y
-# CONFIG_XZ_DEC_ARM is not set
-# CONFIG_XZ_DEC_ARMTHUMB is not set
-# CONFIG_XZ_DEC_BCJ is not set
-# CONFIG_XZ_DEC_IA64 is not set
-# CONFIG_XZ_DEC_POWERPC is not set
-# CONFIG_XZ_DEC_SPARC is not set
-# CONFIG_XZ_DEC_TEST is not set
-# CONFIG_XZ_DEC_X86 is not set
-# CONFIG_YAM is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_YENTA is not set
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_ZBUD is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_ZD1211RW_DEBUG is not set
-# CONFIG_ZEROPLUS_FF is not set
-# CONFIG_ZIIRAVE_WATCHDOG is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_ZLIB_DEFLATE is not set
-# CONFIG_ZLIB_INFLATE is not set
-CONFIG_ZONE_DMA=y
-# CONFIG_ZOPT2201 is not set
-# CONFIG_ZPA2326 is not set
-# CONFIG_ZPOOL is not set
-# CONFIG_ZRAM is not set
-# CONFIG_ZRAM_MEMORY_TRACKING is not set
-# CONFIG_ZSMALLOC is not set
-# CONFIG_ZX_TDM is not set
diff --git a/target/linux/generic/hack-5.4/204-module_strip.patch b/target/linux/generic/hack-5.4/204-module_strip.patch
deleted file mode 100644
index d6e25f319b..0000000000
--- a/target/linux/generic/hack-5.4/204-module_strip.patch
+++ /dev/null
@@ -1,220 +0,0 @@
-From a779a482fb9b9f8fcdf8b2519c789b4b9bb5dd05 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 16:56:48 +0200
-Subject: build: add a hack for removing non-essential module info
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/module.h      | 13 ++++++++-----
- include/linux/moduleparam.h | 15 ++++++++++++---
- init/Kconfig                |  7 +++++++
- kernel/module.c             |  5 ++++-
- scripts/mod/modpost.c       | 12 ++++++++++++
- 5 files changed, 43 insertions(+), 9 deletions(-)
-
---- a/include/linux/module.h
-+++ b/include/linux/module.h
-@@ -157,6 +157,7 @@ extern void cleanup_module(void);
- 
- /* Generic info of form tag = "info" */
- #define MODULE_INFO(tag, info) __MODULE_INFO(tag, tag, info)
-+#define MODULE_INFO_STRIP(tag, info) __MODULE_INFO_STRIP(tag, tag, info)
- 
- /* For userspace: you can also call me... */
- #define MODULE_ALIAS(_alias) MODULE_INFO(alias, _alias)
-@@ -216,12 +217,12 @@ extern void cleanup_module(void);
-  * Author(s), use "Name <email>" or just "Name", for multiple
-  * authors use multiple MODULE_AUTHOR() statements/lines.
-  */
--#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
-+#define MODULE_AUTHOR(_author) MODULE_INFO_STRIP(author, _author)
- 
- /* What your module does. */
--#define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description)
-+#define MODULE_DESCRIPTION(_description) MODULE_INFO_STRIP(description, _description)
- 
--#ifdef MODULE
-+#if defined(MODULE) && !defined(CONFIG_MODULE_STRIPPED)
- /* Creates an alias so file2alias.c can find device table. */
- #define MODULE_DEVICE_TABLE(type, name)					\
- extern typeof(name) __mod_##type##__##name##_device_table		\
-@@ -248,7 +249,9 @@ extern typeof(name) __mod_##type##__##na
-  */
- 
- #if defined(MODULE) || !defined(CONFIG_SYSFS)
--#define MODULE_VERSION(_version) MODULE_INFO(version, _version)
-+#define MODULE_VERSION(_version) MODULE_INFO_STRIP(version, _version)
-+#elif defined(CONFIG_MODULE_STRIPPED)
-+#define MODULE_VERSION(_version) __MODULE_INFO_DISABLED(version)
- #else
- #define MODULE_VERSION(_version)					\
- 	MODULE_INFO(version, _version);					\
-@@ -271,7 +274,7 @@ extern typeof(name) __mod_##type##__##na
- /* Optional firmware file (or files) needed by the module
-  * format is simply firmware file name.  Multiple firmware
-  * files require multiple MODULE_FIRMWARE() specifiers */
--#define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware)
-+#define MODULE_FIRMWARE(_firmware) MODULE_INFO_STRIP(firmware, _firmware)
- 
- #define MODULE_IMPORT_NS(ns) MODULE_INFO(import_ns, #ns)
- 
---- a/include/linux/moduleparam.h
-+++ b/include/linux/moduleparam.h
-@@ -20,10 +20,24 @@
- /* Chosen so that structs with an unsigned long line up. */
- #define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long))
- 
-+/* This struct is here for syntactic coherency, it is not used */
-+#define __MODULE_INFO_DISABLED(name)					  \
-+  struct __UNIQUE_ID(name) {}
-+
-+#ifdef CONFIG_MODULE_STRIPPED
-+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO_DISABLED(name)
-+#else
-+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO(tag, name, info)
-+#endif
-+
-+#ifdef MODULE
- #define __MODULE_INFO(tag, name, info)					  \
- static const char __UNIQUE_ID(name)[]					  \
-   __used __attribute__((section(".modinfo"), unused, aligned(1)))	  \
-   = __MODULE_INFO_PREFIX __stringify(tag) "=" info
-+#else
-+#define __MODULE_INFO(tag, name, info) __MODULE_INFO_DISABLED(name)
-+#endif
- 
- #define __MODULE_PARM_TYPE(name, _type)					  \
-   __MODULE_INFO(parmtype, name##type, #name ":" _type)
-@@ -31,7 +45,7 @@ static const char __UNIQUE_ID(name)[]
- /* One for each parameter, describing how to use it.  Some files do
-    multiple of these per line, so can't just use MODULE_INFO. */
- #define MODULE_PARM_DESC(_parm, desc) \
--	__MODULE_INFO(parm, _parm, #_parm ":" desc)
-+	__MODULE_INFO_STRIP(parm, _parm, #_parm ":" desc)
- 
- struct kernel_param;
- 
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -2198,6 +2198,13 @@ config TRIM_UNUSED_KSYMS
- 
- 	  If unsure, or if you need to build out-of-tree modules, say N.
- 
-+config MODULE_STRIPPED
-+	bool "Reduce module size"
-+	depends on MODULES
-+	help
-+	  Remove module parameter descriptions, author info, version, aliases,
-+	  device tables, etc.
-+
- endif # MODULES
- 
- config MODULES_TREE_LOOKUP
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -1281,6 +1281,7 @@ static struct module_attribute *modinfo_
- 
- static const char vermagic[] = VERMAGIC_STRING;
- 
-+#if defined(CONFIG_MODVERSIONS) || !defined(CONFIG_MODULE_STRIPPED)
- static int try_to_force_load(struct module *mod, const char *reason)
- {
- #ifdef CONFIG_MODULE_FORCE_LOAD
-@@ -1292,6 +1293,7 @@ static int try_to_force_load(struct modu
- 	return -ENOEXEC;
- #endif
- }
-+#endif
- 
- #ifdef CONFIG_MODVERSIONS
- 
-@@ -3256,9 +3258,11 @@ static int setup_load_info(struct load_i
- 
- static int check_modinfo(struct module *mod, struct load_info *info, int flags)
- {
--	const char *modmagic = get_modinfo(info, "vermagic");
- 	int err;
- 
-+#ifndef CONFIG_MODULE_STRIPPED
-+	const char *modmagic = get_modinfo(info, "vermagic");
-+
- 	if (flags & MODULE_INIT_IGNORE_VERMAGIC)
- 		modmagic = NULL;
- 
-@@ -3279,6 +3283,7 @@ static int check_modinfo(struct module *
- 				mod->name);
- 		add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
- 	}
-+#endif
- 
- 	check_modinfo_retpoline(mod, info);
- 
---- a/scripts/mod/modpost.c
-+++ b/scripts/mod/modpost.c
-@@ -2056,7 +2056,9 @@ static void read_symbols(const char *mod
- 		symname = remove_dot(info.strtab + sym->st_name);
- 
- 		handle_modversions(mod, &info, sym, symname);
-+#ifndef CONFIG_MODULE_STRIPPED
- 		handle_moddevtable(mod, &info, sym, symname);
-+#endif
- 	}
- 
- 	/* Apply symbol namespaces from __kstrtabns_<symbol> entries. */
-@@ -2270,8 +2272,10 @@ static void add_header(struct buffer *b,
- 	buf_printf(b, "\n");
- 	buf_printf(b, "BUILD_SALT;\n");
- 	buf_printf(b, "\n");
-+#ifndef CONFIG_MODULE_STRIPPED
- 	buf_printf(b, "MODULE_INFO(vermagic, VERMAGIC_STRING);\n");
- 	buf_printf(b, "MODULE_INFO(name, KBUILD_MODNAME);\n");
-+#endif
- 	buf_printf(b, "\n");
- 	buf_printf(b, "__visible struct module __this_module\n");
- 	buf_printf(b, "__section(.gnu.linkonce.this_module) = {\n");
-@@ -2288,8 +2292,10 @@ static void add_header(struct buffer *b,
- 
- static void add_intree_flag(struct buffer *b, int is_intree)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- 	if (is_intree)
- 		buf_printf(b, "\nMODULE_INFO(intree, \"Y\");\n");
-+#endif
- }
- 
- /* Cannot check for assembler */
-@@ -2302,8 +2308,10 @@ static void add_retpoline(struct buffer
- 
- static void add_staging_flag(struct buffer *b, const char *name)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- 	if (strstarts(name, "drivers/staging"))
- 		buf_printf(b, "\nMODULE_INFO(staging, \"Y\");\n");
-+#endif
- }
- 
- /**
-@@ -2387,11 +2395,13 @@ static void add_depends(struct buffer *b
- 
- static void add_srcversion(struct buffer *b, struct module *mod)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- 	if (mod->srcversion[0]) {
- 		buf_printf(b, "\n");
- 		buf_printf(b, "MODULE_INFO(srcversion, \"%s\");\n",
- 			   mod->srcversion);
- 	}
-+#endif
- }
- 
- static void write_if_changed(struct buffer *b, const char *fname)
-@@ -2661,7 +2671,9 @@ int main(int argc, char **argv)
- 		add_staging_flag(&buf, mod->name);
- 		err |= add_versions(&buf, mod);
- 		add_depends(&buf, mod);
-+#ifndef CONFIG_MODULE_STRIPPED
- 		add_moddevtable(&buf, mod);
-+#endif
- 		add_srcversion(&buf, mod);
- 
- 		sprintf(fname, "%s.mod.c", mod->name);
diff --git a/target/linux/generic/hack-5.4/205-kconfig-exit.patch b/target/linux/generic/hack-5.4/205-kconfig-exit.patch
deleted file mode 100644
index 8931ad3270..0000000000
--- a/target/linux/generic/hack-5.4/205-kconfig-exit.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/scripts/kconfig/conf.c
-+++ b/scripts/kconfig/conf.c
-@@ -212,6 +212,8 @@ static int conf_sym(struct menu *menu)
- 				break;
- 			continue;
- 		case 0:
-+			if (!sym_has_value(sym) && !tty_stdio && getenv("FAIL_ON_UNCONFIGURED"))
-+				exit(1);
- 			newval = oldval;
- 			break;
- 		case '?':
diff --git a/target/linux/generic/hack-5.4/210-darwin_scripts_include.patch b/target/linux/generic/hack-5.4/210-darwin_scripts_include.patch
deleted file mode 100644
index be6adc0d11..0000000000
--- a/target/linux/generic/hack-5.4/210-darwin_scripts_include.patch
+++ /dev/null
@@ -1,3053 +0,0 @@
-From db7c30dcd9a0391bf13b62c9f91e144d762ef43a Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Fri, 7 Jul 2017 17:00:49 +0200
-Subject: Add an OSX specific patch to make the kernel be compiled
-
-lede-commit: 3fc2a24f0422b2f55f9ed43f116db3111f700526
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- scripts/kconfig/Makefile   |    3 +
- scripts/mod/elf.h          | 3007 ++++++++++++++++++++++++++++++++++++++++++++
- scripts/mod/mk_elfconfig.c |    4 +
- scripts/mod/modpost.h      |    4 +
- 4 files changed, 3018 insertions(+)
- create mode 100644 scripts/mod/elf.h
-
---- /dev/null
-+++ b/scripts/mod/elf.h
-@@ -0,0 +1,3007 @@
-+/* This file defines standard ELF types, structures, and macros.
-+   Copyright (C) 1995-2012 Free Software Foundation, Inc.
-+   This file is part of the GNU C Library.
-+
-+   The GNU C Library is free software; you can redistribute it and/or
-+   modify it under the terms of the GNU Lesser General Public
-+   License as published by the Free Software Foundation; either
-+   version 2.1 of the License, or (at your option) any later version.
-+
-+   The GNU C Library is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+   Lesser General Public License for more details.
-+
-+   You should have received a copy of the GNU Lesser General Public
-+   License along with the GNU C Library; if not, see
-+   <http://www.gnu.org/licenses/>.  */
-+
-+#ifndef _ELF_H
-+#define	_ELF_H 1
-+
-+/* Standard ELF types.  */
-+
-+#include <stdint.h>
-+
-+/* Type for a 16-bit quantity.  */
-+typedef uint16_t Elf32_Half;
-+typedef uint16_t Elf64_Half;
-+
-+/* Types for signed and unsigned 32-bit quantities.  */
-+typedef uint32_t Elf32_Word;
-+typedef	int32_t  Elf32_Sword;
-+typedef uint32_t Elf64_Word;
-+typedef	int32_t  Elf64_Sword;
-+
-+/* Types for signed and unsigned 64-bit quantities.  */
-+typedef uint64_t Elf32_Xword;
-+typedef	int64_t  Elf32_Sxword;
-+typedef uint64_t Elf64_Xword;
-+typedef	int64_t  Elf64_Sxword;
-+
-+/* Type of addresses.  */
-+typedef uint32_t Elf32_Addr;
-+typedef uint64_t Elf64_Addr;
-+
-+/* Type of file offsets.  */
-+typedef uint32_t Elf32_Off;
-+typedef uint64_t Elf64_Off;
-+
-+/* Type for section indices, which are 16-bit quantities.  */
-+typedef uint16_t Elf32_Section;
-+typedef uint16_t Elf64_Section;
-+
-+/* Type for version symbol information.  */
-+typedef Elf32_Half Elf32_Versym;
-+typedef Elf64_Half Elf64_Versym;
-+
-+
-+/* The ELF file header.  This appears at the start of every ELF file.  */
-+
-+#define EI_NIDENT (16)
-+
-+typedef struct
-+{
-+  unsigned char	e_ident[EI_NIDENT];	/* Magic number and other info */
-+  Elf32_Half	e_type;			/* Object file type */
-+  Elf32_Half	e_machine;		/* Architecture */
-+  Elf32_Word	e_version;		/* Object file version */
-+  Elf32_Addr	e_entry;		/* Entry point virtual address */
-+  Elf32_Off	e_phoff;		/* Program header table file offset */
-+  Elf32_Off	e_shoff;		/* Section header table file offset */
-+  Elf32_Word	e_flags;		/* Processor-specific flags */
-+  Elf32_Half	e_ehsize;		/* ELF header size in bytes */
-+  Elf32_Half	e_phentsize;		/* Program header table entry size */
-+  Elf32_Half	e_phnum;		/* Program header table entry count */
-+  Elf32_Half	e_shentsize;		/* Section header table entry size */
-+  Elf32_Half	e_shnum;		/* Section header table entry count */
-+  Elf32_Half	e_shstrndx;		/* Section header string table index */
-+} Elf32_Ehdr;
-+
-+typedef struct
-+{
-+  unsigned char	e_ident[EI_NIDENT];	/* Magic number and other info */
-+  Elf64_Half	e_type;			/* Object file type */
-+  Elf64_Half	e_machine;		/* Architecture */
-+  Elf64_Word	e_version;		/* Object file version */
-+  Elf64_Addr	e_entry;		/* Entry point virtual address */
-+  Elf64_Off	e_phoff;		/* Program header table file offset */
-+  Elf64_Off	e_shoff;		/* Section header table file offset */
-+  Elf64_Word	e_flags;		/* Processor-specific flags */
-+  Elf64_Half	e_ehsize;		/* ELF header size in bytes */
-+  Elf64_Half	e_phentsize;		/* Program header table entry size */
-+  Elf64_Half	e_phnum;		/* Program header table entry count */
-+  Elf64_Half	e_shentsize;		/* Section header table entry size */
-+  Elf64_Half	e_shnum;		/* Section header table entry count */
-+  Elf64_Half	e_shstrndx;		/* Section header string table index */
-+} Elf64_Ehdr;
-+
-+/* Fields in the e_ident array.  The EI_* macros are indices into the
-+   array.  The macros under each EI_* macro are the values the byte
-+   may have.  */
-+
-+#define EI_MAG0		0		/* File identification byte 0 index */
-+#define ELFMAG0		0x7f		/* Magic number byte 0 */
-+
-+#define EI_MAG1		1		/* File identification byte 1 index */
-+#define ELFMAG1		'E'		/* Magic number byte 1 */
-+
-+#define EI_MAG2		2		/* File identification byte 2 index */
-+#define ELFMAG2		'L'		/* Magic number byte 2 */
-+
-+#define EI_MAG3		3		/* File identification byte 3 index */
-+#define ELFMAG3		'F'		/* Magic number byte 3 */
-+
-+/* Conglomeration of the identification bytes, for easy testing as a word.  */
-+#define	ELFMAG		"\177ELF"
-+#define	SELFMAG		4
-+
-+#define EI_CLASS	4		/* File class byte index */
-+#define ELFCLASSNONE	0		/* Invalid class */
-+#define ELFCLASS32	1		/* 32-bit objects */
-+#define ELFCLASS64	2		/* 64-bit objects */
-+#define ELFCLASSNUM	3
-+
-+#define EI_DATA		5		/* Data encoding byte index */
-+#define ELFDATANONE	0		/* Invalid data encoding */
-+#define ELFDATA2LSB	1		/* 2's complement, little endian */
-+#define ELFDATA2MSB	2		/* 2's complement, big endian */
-+#define ELFDATANUM	3
-+
-+#define EI_VERSION	6		/* File version byte index */
-+					/* Value must be EV_CURRENT */
-+
-+#define EI_OSABI	7		/* OS ABI identification */
-+#define ELFOSABI_NONE		0	/* UNIX System V ABI */
-+#define ELFOSABI_SYSV		0	/* Alias.  */
-+#define ELFOSABI_HPUX		1	/* HP-UX */
-+#define ELFOSABI_NETBSD		2	/* NetBSD.  */
-+#define ELFOSABI_GNU		3	/* Object uses GNU ELF extensions.  */
-+#define ELFOSABI_LINUX		ELFOSABI_GNU /* Compatibility alias.  */
-+#define ELFOSABI_SOLARIS	6	/* Sun Solaris.  */
-+#define ELFOSABI_AIX		7	/* IBM AIX.  */
-+#define ELFOSABI_IRIX		8	/* SGI Irix.  */
-+#define ELFOSABI_FREEBSD	9	/* FreeBSD.  */
-+#define ELFOSABI_TRU64		10	/* Compaq TRU64 UNIX.  */
-+#define ELFOSABI_MODESTO	11	/* Novell Modesto.  */
-+#define ELFOSABI_OPENBSD	12	/* OpenBSD.  */
-+#define ELFOSABI_ARM_AEABI	64	/* ARM EABI */
-+#define ELFOSABI_ARM		97	/* ARM */
-+#define ELFOSABI_STANDALONE	255	/* Standalone (embedded) application */
-+
-+#define EI_ABIVERSION	8		/* ABI version */
-+
-+#define EI_PAD		9		/* Byte index of padding bytes */
-+
-+/* Legal values for e_type (object file type).  */
-+
-+#define ET_NONE		0		/* No file type */
-+#define ET_REL		1		/* Relocatable file */
-+#define ET_EXEC		2		/* Executable file */
-+#define ET_DYN		3		/* Shared object file */
-+#define ET_CORE		4		/* Core file */
-+#define	ET_NUM		5		/* Number of defined types */
-+#define ET_LOOS		0xfe00		/* OS-specific range start */
-+#define ET_HIOS		0xfeff		/* OS-specific range end */
-+#define ET_LOPROC	0xff00		/* Processor-specific range start */
-+#define ET_HIPROC	0xffff		/* Processor-specific range end */
-+
-+/* Legal values for e_machine (architecture).  */
-+
-+#define EM_NONE		 0		/* No machine */
-+#define EM_M32		 1		/* AT&T WE 32100 */
-+#define EM_SPARC	 2		/* SUN SPARC */
-+#define EM_386		 3		/* Intel 80386 */
-+#define EM_68K		 4		/* Motorola m68k family */
-+#define EM_88K		 5		/* Motorola m88k family */
-+#define EM_860		 7		/* Intel 80860 */
-+#define EM_MIPS		 8		/* MIPS R3000 big-endian */
-+#define EM_S370		 9		/* IBM System/370 */
-+#define EM_MIPS_RS3_LE	10		/* MIPS R3000 little-endian */
-+
-+#define EM_PARISC	15		/* HPPA */
-+#define EM_VPP500	17		/* Fujitsu VPP500 */
-+#define EM_SPARC32PLUS	18		/* Sun's "v8plus" */
-+#define EM_960		19		/* Intel 80960 */
-+#define EM_PPC		20		/* PowerPC */
-+#define EM_PPC64	21		/* PowerPC 64-bit */
-+#define EM_S390		22		/* IBM S390 */
-+
-+#define EM_V800		36		/* NEC V800 series */
-+#define EM_FR20		37		/* Fujitsu FR20 */
-+#define EM_RH32		38		/* TRW RH-32 */
-+#define EM_RCE		39		/* Motorola RCE */
-+#define EM_ARM		40		/* ARM */
-+#define EM_FAKE_ALPHA	41		/* Digital Alpha */
-+#define EM_SH		42		/* Hitachi SH */
-+#define EM_SPARCV9	43		/* SPARC v9 64-bit */
-+#define EM_TRICORE	44		/* Siemens Tricore */
-+#define EM_ARC		45		/* Argonaut RISC Core */
-+#define EM_H8_300	46		/* Hitachi H8/300 */
-+#define EM_H8_300H	47		/* Hitachi H8/300H */
-+#define EM_H8S		48		/* Hitachi H8S */
-+#define EM_H8_500	49		/* Hitachi H8/500 */
-+#define EM_IA_64	50		/* Intel Merced */
-+#define EM_MIPS_X	51		/* Stanford MIPS-X */
-+#define EM_COLDFIRE	52		/* Motorola Coldfire */
-+#define EM_68HC12	53		/* Motorola M68HC12 */
-+#define EM_MMA		54		/* Fujitsu MMA Multimedia Accelerator*/
-+#define EM_PCP		55		/* Siemens PCP */
-+#define EM_NCPU		56		/* Sony nCPU embeeded RISC */
-+#define EM_NDR1		57		/* Denso NDR1 microprocessor */
-+#define EM_STARCORE	58		/* Motorola Start*Core processor */
-+#define EM_ME16		59		/* Toyota ME16 processor */
-+#define EM_ST100	60		/* STMicroelectronic ST100 processor */
-+#define EM_TINYJ	61		/* Advanced Logic Corp. Tinyj emb.fam*/
-+#define EM_X86_64	62		/* AMD x86-64 architecture */
-+#define EM_PDSP		63		/* Sony DSP Processor */
-+
-+#define EM_FX66		66		/* Siemens FX66 microcontroller */
-+#define EM_ST9PLUS	67		/* STMicroelectronics ST9+ 8/16 mc */
-+#define EM_ST7		68		/* STmicroelectronics ST7 8 bit mc */
-+#define EM_68HC16	69		/* Motorola MC68HC16 microcontroller */
-+#define EM_68HC11	70		/* Motorola MC68HC11 microcontroller */
-+#define EM_68HC08	71		/* Motorola MC68HC08 microcontroller */
-+#define EM_68HC05	72		/* Motorola MC68HC05 microcontroller */
-+#define EM_SVX		73		/* Silicon Graphics SVx */
-+#define EM_ST19		74		/* STMicroelectronics ST19 8 bit mc */
-+#define EM_VAX		75		/* Digital VAX */
-+#define EM_CRIS		76		/* Axis Communications 32-bit embedded processor */
-+#define EM_JAVELIN	77		/* Infineon Technologies 32-bit embedded processor */
-+#define EM_FIREPATH	78		/* Element 14 64-bit DSP Processor */
-+#define EM_ZSP		79		/* LSI Logic 16-bit DSP Processor */
-+#define EM_MMIX		80		/* Donald Knuth's educational 64-bit processor */
-+#define EM_HUANY	81		/* Harvard University machine-independent object files */
-+#define EM_PRISM	82		/* SiTera Prism */
-+#define EM_AVR		83		/* Atmel AVR 8-bit microcontroller */
-+#define EM_FR30		84		/* Fujitsu FR30 */
-+#define EM_D10V		85		/* Mitsubishi D10V */
-+#define EM_D30V		86		/* Mitsubishi D30V */
-+#define EM_V850		87		/* NEC v850 */
-+#define EM_M32R		88		/* Mitsubishi M32R */
-+#define EM_MN10300	89		/* Matsushita MN10300 */
-+#define EM_MN10200	90		/* Matsushita MN10200 */
-+#define EM_PJ		91		/* picoJava */
-+#define EM_OPENRISC	92		/* OpenRISC 32-bit embedded processor */
-+#define EM_ARC_A5	93		/* ARC Cores Tangent-A5 */
-+#define EM_XTENSA	94		/* Tensilica Xtensa Architecture */
-+#define EM_TILEPRO	188		/* Tilera TILEPro */
-+#define EM_TILEGX	191		/* Tilera TILE-Gx */
-+#define EM_NUM		192
-+
-+/* If it is necessary to assign new unofficial EM_* values, please
-+   pick large random numbers (0x8523, 0xa7f2, etc.) to minimize the
-+   chances of collision with official or non-GNU unofficial values.  */
-+
-+#define EM_ALPHA	0x9026
-+
-+/* Legal values for e_version (version).  */
-+
-+#define EV_NONE		0		/* Invalid ELF version */
-+#define EV_CURRENT	1		/* Current version */
-+#define EV_NUM		2
-+
-+/* Section header.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	sh_name;		/* Section name (string tbl index) */
-+  Elf32_Word	sh_type;		/* Section type */
-+  Elf32_Word	sh_flags;		/* Section flags */
-+  Elf32_Addr	sh_addr;		/* Section virtual addr at execution */
-+  Elf32_Off	sh_offset;		/* Section file offset */
-+  Elf32_Word	sh_size;		/* Section size in bytes */
-+  Elf32_Word	sh_link;		/* Link to another section */
-+  Elf32_Word	sh_info;		/* Additional section information */
-+  Elf32_Word	sh_addralign;		/* Section alignment */
-+  Elf32_Word	sh_entsize;		/* Entry size if section holds table */
-+} Elf32_Shdr;
-+
-+typedef struct
-+{
-+  Elf64_Word	sh_name;		/* Section name (string tbl index) */
-+  Elf64_Word	sh_type;		/* Section type */
-+  Elf64_Xword	sh_flags;		/* Section flags */
-+  Elf64_Addr	sh_addr;		/* Section virtual addr at execution */
-+  Elf64_Off	sh_offset;		/* Section file offset */
-+  Elf64_Xword	sh_size;		/* Section size in bytes */
-+  Elf64_Word	sh_link;		/* Link to another section */
-+  Elf64_Word	sh_info;		/* Additional section information */
-+  Elf64_Xword	sh_addralign;		/* Section alignment */
-+  Elf64_Xword	sh_entsize;		/* Entry size if section holds table */
-+} Elf64_Shdr;
-+
-+/* Special section indices.  */
-+
-+#define SHN_UNDEF	0		/* Undefined section */
-+#define SHN_LORESERVE	0xff00		/* Start of reserved indices */
-+#define SHN_LOPROC	0xff00		/* Start of processor-specific */
-+#define SHN_BEFORE	0xff00		/* Order section before all others
-+					   (Solaris).  */
-+#define SHN_AFTER	0xff01		/* Order section after all others
-+					   (Solaris).  */
-+#define SHN_HIPROC	0xff1f		/* End of processor-specific */
-+#define SHN_LOOS	0xff20		/* Start of OS-specific */
-+#define SHN_HIOS	0xff3f		/* End of OS-specific */
-+#define SHN_ABS		0xfff1		/* Associated symbol is absolute */
-+#define SHN_COMMON	0xfff2		/* Associated symbol is common */
-+#define SHN_XINDEX	0xffff		/* Index is in extra table.  */
-+#define SHN_HIRESERVE	0xffff		/* End of reserved indices */
-+
-+/* Legal values for sh_type (section type).  */
-+
-+#define SHT_NULL	  0		/* Section header table entry unused */
-+#define SHT_PROGBITS	  1		/* Program data */
-+#define SHT_SYMTAB	  2		/* Symbol table */
-+#define SHT_STRTAB	  3		/* String table */
-+#define SHT_RELA	  4		/* Relocation entries with addends */
-+#define SHT_HASH	  5		/* Symbol hash table */
-+#define SHT_DYNAMIC	  6		/* Dynamic linking information */
-+#define SHT_NOTE	  7		/* Notes */
-+#define SHT_NOBITS	  8		/* Program space with no data (bss) */
-+#define SHT_REL		  9		/* Relocation entries, no addends */
-+#define SHT_SHLIB	  10		/* Reserved */
-+#define SHT_DYNSYM	  11		/* Dynamic linker symbol table */
-+#define SHT_INIT_ARRAY	  14		/* Array of constructors */
-+#define SHT_FINI_ARRAY	  15		/* Array of destructors */
-+#define SHT_PREINIT_ARRAY 16		/* Array of pre-constructors */
-+#define SHT_GROUP	  17		/* Section group */
-+#define SHT_SYMTAB_SHNDX  18		/* Extended section indeces */
-+#define	SHT_NUM		  19		/* Number of defined types.  */
-+#define SHT_LOOS	  0x60000000	/* Start OS-specific.  */
-+#define SHT_GNU_ATTRIBUTES 0x6ffffff5	/* Object attributes.  */
-+#define SHT_GNU_HASH	  0x6ffffff6	/* GNU-style hash table.  */
-+#define SHT_GNU_LIBLIST	  0x6ffffff7	/* Prelink library list */
-+#define SHT_CHECKSUM	  0x6ffffff8	/* Checksum for DSO content.  */
-+#define SHT_LOSUNW	  0x6ffffffa	/* Sun-specific low bound.  */
-+#define SHT_SUNW_move	  0x6ffffffa
-+#define SHT_SUNW_COMDAT   0x6ffffffb
-+#define SHT_SUNW_syminfo  0x6ffffffc
-+#define SHT_GNU_verdef	  0x6ffffffd	/* Version definition section.  */
-+#define SHT_GNU_verneed	  0x6ffffffe	/* Version needs section.  */
-+#define SHT_GNU_versym	  0x6fffffff	/* Version symbol table.  */
-+#define SHT_HISUNW	  0x6fffffff	/* Sun-specific high bound.  */
-+#define SHT_HIOS	  0x6fffffff	/* End OS-specific type */
-+#define SHT_LOPROC	  0x70000000	/* Start of processor-specific */
-+#define SHT_HIPROC	  0x7fffffff	/* End of processor-specific */
-+#define SHT_LOUSER	  0x80000000	/* Start of application-specific */
-+#define SHT_HIUSER	  0x8fffffff	/* End of application-specific */
-+
-+/* Legal values for sh_flags (section flags).  */
-+
-+#define SHF_WRITE	     (1 << 0)	/* Writable */
-+#define SHF_ALLOC	     (1 << 1)	/* Occupies memory during execution */
-+#define SHF_EXECINSTR	     (1 << 2)	/* Executable */
-+#define SHF_MERGE	     (1 << 4)	/* Might be merged */
-+#define SHF_STRINGS	     (1 << 5)	/* Contains nul-terminated strings */
-+#define SHF_INFO_LINK	     (1 << 6)	/* `sh_info' contains SHT index */
-+#define SHF_LINK_ORDER	     (1 << 7)	/* Preserve order after combining */
-+#define SHF_OS_NONCONFORMING (1 << 8)	/* Non-standard OS specific handling
-+					   required */
-+#define SHF_GROUP	     (1 << 9)	/* Section is member of a group.  */
-+#define SHF_TLS		     (1 << 10)	/* Section hold thread-local data.  */
-+#define SHF_MASKOS	     0x0ff00000	/* OS-specific.  */
-+#define SHF_MASKPROC	     0xf0000000	/* Processor-specific */
-+#define SHF_ORDERED	     (1 << 30)	/* Special ordering requirement
-+					   (Solaris).  */
-+#define SHF_EXCLUDE	     (1 << 31)	/* Section is excluded unless
-+					   referenced or allocated (Solaris).*/
-+
-+/* Section group handling.  */
-+#define GRP_COMDAT	0x1		/* Mark group as COMDAT.  */
-+
-+/* Symbol table entry.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	st_name;		/* Symbol name (string tbl index) */
-+  Elf32_Addr	st_value;		/* Symbol value */
-+  Elf32_Word	st_size;		/* Symbol size */
-+  unsigned char	st_info;		/* Symbol type and binding */
-+  unsigned char	st_other;		/* Symbol visibility */
-+  Elf32_Section	st_shndx;		/* Section index */
-+} Elf32_Sym;
-+
-+typedef struct
-+{
-+  Elf64_Word	st_name;		/* Symbol name (string tbl index) */
-+  unsigned char	st_info;		/* Symbol type and binding */
-+  unsigned char st_other;		/* Symbol visibility */
-+  Elf64_Section	st_shndx;		/* Section index */
-+  Elf64_Addr	st_value;		/* Symbol value */
-+  Elf64_Xword	st_size;		/* Symbol size */
-+} Elf64_Sym;
-+
-+/* The syminfo section if available contains additional information about
-+   every dynamic symbol.  */
-+
-+typedef struct
-+{
-+  Elf32_Half si_boundto;		/* Direct bindings, symbol bound to */
-+  Elf32_Half si_flags;			/* Per symbol flags */
-+} Elf32_Syminfo;
-+
-+typedef struct
-+{
-+  Elf64_Half si_boundto;		/* Direct bindings, symbol bound to */
-+  Elf64_Half si_flags;			/* Per symbol flags */
-+} Elf64_Syminfo;
-+
-+/* Possible values for si_boundto.  */
-+#define SYMINFO_BT_SELF		0xffff	/* Symbol bound to self */
-+#define SYMINFO_BT_PARENT	0xfffe	/* Symbol bound to parent */
-+#define SYMINFO_BT_LOWRESERVE	0xff00	/* Beginning of reserved entries */
-+
-+/* Possible bitmasks for si_flags.  */
-+#define SYMINFO_FLG_DIRECT	0x0001	/* Direct bound symbol */
-+#define SYMINFO_FLG_PASSTHRU	0x0002	/* Pass-thru symbol for translator */
-+#define SYMINFO_FLG_COPY	0x0004	/* Symbol is a copy-reloc */
-+#define SYMINFO_FLG_LAZYLOAD	0x0008	/* Symbol bound to object to be lazy
-+					   loaded */
-+/* Syminfo version values.  */
-+#define SYMINFO_NONE		0
-+#define SYMINFO_CURRENT		1
-+#define SYMINFO_NUM		2
-+
-+
-+/* How to extract and insert information held in the st_info field.  */
-+
-+#define ELF32_ST_BIND(val)		(((unsigned char) (val)) >> 4)
-+#define ELF32_ST_TYPE(val)		((val) & 0xf)
-+#define ELF32_ST_INFO(bind, type)	(((bind) << 4) + ((type) & 0xf))
-+
-+/* Both Elf32_Sym and Elf64_Sym use the same one-byte st_info field.  */
-+#define ELF64_ST_BIND(val)		ELF32_ST_BIND (val)
-+#define ELF64_ST_TYPE(val)		ELF32_ST_TYPE (val)
-+#define ELF64_ST_INFO(bind, type)	ELF32_ST_INFO ((bind), (type))
-+
-+/* Legal values for ST_BIND subfield of st_info (symbol binding).  */
-+
-+#define STB_LOCAL	0		/* Local symbol */
-+#define STB_GLOBAL	1		/* Global symbol */
-+#define STB_WEAK	2		/* Weak symbol */
-+#define	STB_NUM		3		/* Number of defined types.  */
-+#define STB_LOOS	10		/* Start of OS-specific */
-+#define STB_GNU_UNIQUE	10		/* Unique symbol.  */
-+#define STB_HIOS	12		/* End of OS-specific */
-+#define STB_LOPROC	13		/* Start of processor-specific */
-+#define STB_HIPROC	15		/* End of processor-specific */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
-+
-+#define STT_NOTYPE	0		/* Symbol type is unspecified */
-+#define STT_OBJECT	1		/* Symbol is a data object */
-+#define STT_FUNC	2		/* Symbol is a code object */
-+#define STT_SECTION	3		/* Symbol associated with a section */
-+#define STT_FILE	4		/* Symbol's name is file name */
-+#define STT_COMMON	5		/* Symbol is a common data object */
-+#define STT_TLS		6		/* Symbol is thread-local data object*/
-+#define	STT_NUM		7		/* Number of defined types.  */
-+#define STT_LOOS	10		/* Start of OS-specific */
-+#define STT_GNU_IFUNC	10		/* Symbol is indirect code object */
-+#define STT_HIOS	12		/* End of OS-specific */
-+#define STT_LOPROC	13		/* Start of processor-specific */
-+#define STT_HIPROC	15		/* End of processor-specific */
-+
-+
-+/* Symbol table indices are found in the hash buckets and chain table
-+   of a symbol hash table section.  This special index value indicates
-+   the end of a chain, meaning no further symbols are found in that bucket.  */
-+
-+#define STN_UNDEF	0		/* End of a chain.  */
-+
-+
-+/* How to extract and insert information held in the st_other field.  */
-+
-+#define ELF32_ST_VISIBILITY(o)	((o) & 0x03)
-+
-+/* For ELF64 the definitions are the same.  */
-+#define ELF64_ST_VISIBILITY(o)	ELF32_ST_VISIBILITY (o)
-+
-+/* Symbol visibility specification encoded in the st_other field.  */
-+#define STV_DEFAULT	0		/* Default symbol visibility rules */
-+#define STV_INTERNAL	1		/* Processor specific hidden class */
-+#define STV_HIDDEN	2		/* Sym unavailable in other modules */
-+#define STV_PROTECTED	3		/* Not preemptible, not exported */
-+
-+
-+/* Relocation table entry without addend (in section of type SHT_REL).  */
-+
-+typedef struct
-+{
-+  Elf32_Addr	r_offset;		/* Address */
-+  Elf32_Word	r_info;			/* Relocation type and symbol index */
-+} Elf32_Rel;
-+
-+/* I have seen two different definitions of the Elf64_Rel and
-+   Elf64_Rela structures, so we'll leave them out until Novell (or
-+   whoever) gets their act together.  */
-+/* The following, at least, is used on Sparc v9, MIPS, and Alpha.  */
-+
-+typedef struct
-+{
-+  Elf64_Addr	r_offset;		/* Address */
-+  Elf64_Xword	r_info;			/* Relocation type and symbol index */
-+} Elf64_Rel;
-+
-+/* Relocation table entry with addend (in section of type SHT_RELA).  */
-+
-+typedef struct
-+{
-+  Elf32_Addr	r_offset;		/* Address */
-+  Elf32_Word	r_info;			/* Relocation type and symbol index */
-+  Elf32_Sword	r_addend;		/* Addend */
-+} Elf32_Rela;
-+
-+typedef struct
-+{
-+  Elf64_Addr	r_offset;		/* Address */
-+  Elf64_Xword	r_info;			/* Relocation type and symbol index */
-+  Elf64_Sxword	r_addend;		/* Addend */
-+} Elf64_Rela;
-+
-+/* How to extract and insert information held in the r_info field.  */
-+
-+#define ELF32_R_SYM(val)		((val) >> 8)
-+#define ELF32_R_TYPE(val)		((val) & 0xff)
-+#define ELF32_R_INFO(sym, type)		(((sym) << 8) + ((type) & 0xff))
-+
-+#define ELF64_R_SYM(i)			((i) >> 32)
-+#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
-+#define ELF64_R_INFO(sym,type)		((((Elf64_Xword) (sym)) << 32) + (type))
-+
-+/* Program segment header.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	p_type;			/* Segment type */
-+  Elf32_Off	p_offset;		/* Segment file offset */
-+  Elf32_Addr	p_vaddr;		/* Segment virtual address */
-+  Elf32_Addr	p_paddr;		/* Segment physical address */
-+  Elf32_Word	p_filesz;		/* Segment size in file */
-+  Elf32_Word	p_memsz;		/* Segment size in memory */
-+  Elf32_Word	p_flags;		/* Segment flags */
-+  Elf32_Word	p_align;		/* Segment alignment */
-+} Elf32_Phdr;
-+
-+typedef struct
-+{
-+  Elf64_Word	p_type;			/* Segment type */
-+  Elf64_Word	p_flags;		/* Segment flags */
-+  Elf64_Off	p_offset;		/* Segment file offset */
-+  Elf64_Addr	p_vaddr;		/* Segment virtual address */
-+  Elf64_Addr	p_paddr;		/* Segment physical address */
-+  Elf64_Xword	p_filesz;		/* Segment size in file */
-+  Elf64_Xword	p_memsz;		/* Segment size in memory */
-+  Elf64_Xword	p_align;		/* Segment alignment */
-+} Elf64_Phdr;
-+
-+/* Special value for e_phnum.  This indicates that the real number of
-+   program headers is too large to fit into e_phnum.  Instead the real
-+   value is in the field sh_info of section 0.  */
-+
-+#define PN_XNUM		0xffff
-+
-+/* Legal values for p_type (segment type).  */
-+
-+#define	PT_NULL		0		/* Program header table entry unused */
-+#define PT_LOAD		1		/* Loadable program segment */
-+#define PT_DYNAMIC	2		/* Dynamic linking information */
-+#define PT_INTERP	3		/* Program interpreter */
-+#define PT_NOTE		4		/* Auxiliary information */
-+#define PT_SHLIB	5		/* Reserved */
-+#define PT_PHDR		6		/* Entry for header table itself */
-+#define PT_TLS		7		/* Thread-local storage segment */
-+#define	PT_NUM		8		/* Number of defined types */
-+#define PT_LOOS		0x60000000	/* Start of OS-specific */
-+#define PT_GNU_EH_FRAME	0x6474e550	/* GCC .eh_frame_hdr segment */
-+#define PT_GNU_STACK	0x6474e551	/* Indicates stack executability */
-+#define PT_GNU_RELRO	0x6474e552	/* Read-only after relocation */
-+#define PT_LOSUNW	0x6ffffffa
-+#define PT_SUNWBSS	0x6ffffffa	/* Sun Specific segment */
-+#define PT_SUNWSTACK	0x6ffffffb	/* Stack segment */
-+#define PT_HISUNW	0x6fffffff
-+#define PT_HIOS		0x6fffffff	/* End of OS-specific */
-+#define PT_LOPROC	0x70000000	/* Start of processor-specific */
-+#define PT_HIPROC	0x7fffffff	/* End of processor-specific */
-+
-+/* Legal values for p_flags (segment flags).  */
-+
-+#define PF_X		(1 << 0)	/* Segment is executable */
-+#define PF_W		(1 << 1)	/* Segment is writable */
-+#define PF_R		(1 << 2)	/* Segment is readable */
-+#define PF_MASKOS	0x0ff00000	/* OS-specific */
-+#define PF_MASKPROC	0xf0000000	/* Processor-specific */
-+
-+/* Legal values for note segment descriptor types for core files. */
-+
-+#define NT_PRSTATUS	1		/* Contains copy of prstatus struct */
-+#define NT_FPREGSET	2		/* Contains copy of fpregset struct */
-+#define NT_PRPSINFO	3		/* Contains copy of prpsinfo struct */
-+#define NT_PRXREG	4		/* Contains copy of prxregset struct */
-+#define NT_TASKSTRUCT	4		/* Contains copy of task structure */
-+#define NT_PLATFORM	5		/* String from sysinfo(SI_PLATFORM) */
-+#define NT_AUXV		6		/* Contains copy of auxv array */
-+#define NT_GWINDOWS	7		/* Contains copy of gwindows struct */
-+#define NT_ASRS		8		/* Contains copy of asrset struct */
-+#define NT_PSTATUS	10		/* Contains copy of pstatus struct */
-+#define NT_PSINFO	13		/* Contains copy of psinfo struct */
-+#define NT_PRCRED	14		/* Contains copy of prcred struct */
-+#define NT_UTSNAME	15		/* Contains copy of utsname struct */
-+#define NT_LWPSTATUS	16		/* Contains copy of lwpstatus struct */
-+#define NT_LWPSINFO	17		/* Contains copy of lwpinfo struct */
-+#define NT_PRFPXREG	20		/* Contains copy of fprxregset struct */
-+#define NT_PRXFPREG	0x46e62b7f	/* Contains copy of user_fxsr_struct */
-+#define NT_PPC_VMX	0x100		/* PowerPC Altivec/VMX registers */
-+#define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
-+#define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
-+#define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
-+#define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
-+#define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
-+
-+/* Legal values for the note segment descriptor types for object files.  */
-+
-+#define NT_VERSION	1		/* Contains a version string.  */
-+
-+
-+/* Dynamic section entry.  */
-+
-+typedef struct
-+{
-+  Elf32_Sword	d_tag;			/* Dynamic entry type */
-+  union
-+    {
-+      Elf32_Word d_val;			/* Integer value */
-+      Elf32_Addr d_ptr;			/* Address value */
-+    } d_un;
-+} Elf32_Dyn;
-+
-+typedef struct
-+{
-+  Elf64_Sxword	d_tag;			/* Dynamic entry type */
-+  union
-+    {
-+      Elf64_Xword d_val;		/* Integer value */
-+      Elf64_Addr d_ptr;			/* Address value */
-+    } d_un;
-+} Elf64_Dyn;
-+
-+/* Legal values for d_tag (dynamic entry type).  */
-+
-+#define DT_NULL		0		/* Marks end of dynamic section */
-+#define DT_NEEDED	1		/* Name of needed library */
-+#define DT_PLTRELSZ	2		/* Size in bytes of PLT relocs */
-+#define DT_PLTGOT	3		/* Processor defined value */
-+#define DT_HASH		4		/* Address of symbol hash table */
-+#define DT_STRTAB	5		/* Address of string table */
-+#define DT_SYMTAB	6		/* Address of symbol table */
-+#define DT_RELA		7		/* Address of Rela relocs */
-+#define DT_RELASZ	8		/* Total size of Rela relocs */
-+#define DT_RELAENT	9		/* Size of one Rela reloc */
-+#define DT_STRSZ	10		/* Size of string table */
-+#define DT_SYMENT	11		/* Size of one symbol table entry */
-+#define DT_INIT		12		/* Address of init function */
-+#define DT_FINI		13		/* Address of termination function */
-+#define DT_SONAME	14		/* Name of shared object */
-+#define DT_RPATH	15		/* Library search path (deprecated) */
-+#define DT_SYMBOLIC	16		/* Start symbol search here */
-+#define DT_REL		17		/* Address of Rel relocs */
-+#define DT_RELSZ	18		/* Total size of Rel relocs */
-+#define DT_RELENT	19		/* Size of one Rel reloc */
-+#define DT_PLTREL	20		/* Type of reloc in PLT */
-+#define DT_DEBUG	21		/* For debugging; unspecified */
-+#define DT_TEXTREL	22		/* Reloc might modify .text */
-+#define DT_JMPREL	23		/* Address of PLT relocs */
-+#define	DT_BIND_NOW	24		/* Process relocations of object */
-+#define	DT_INIT_ARRAY	25		/* Array with addresses of init fct */
-+#define	DT_FINI_ARRAY	26		/* Array with addresses of fini fct */
-+#define	DT_INIT_ARRAYSZ	27		/* Size in bytes of DT_INIT_ARRAY */
-+#define	DT_FINI_ARRAYSZ	28		/* Size in bytes of DT_FINI_ARRAY */
-+#define DT_RUNPATH	29		/* Library search path */
-+#define DT_FLAGS	30		/* Flags for the object being loaded */
-+#define DT_ENCODING	32		/* Start of encoded range */
-+#define DT_PREINIT_ARRAY 32		/* Array with addresses of preinit fct*/
-+#define DT_PREINIT_ARRAYSZ 33		/* size in bytes of DT_PREINIT_ARRAY */
-+#define	DT_NUM		34		/* Number used */
-+#define DT_LOOS		0x6000000d	/* Start of OS-specific */
-+#define DT_HIOS		0x6ffff000	/* End of OS-specific */
-+#define DT_LOPROC	0x70000000	/* Start of processor-specific */
-+#define DT_HIPROC	0x7fffffff	/* End of processor-specific */
-+#define	DT_PROCNUM	DT_MIPS_NUM	/* Most used by any processor */
-+
-+/* DT_* entries which fall between DT_VALRNGHI & DT_VALRNGLO use the
-+   Dyn.d_un.d_val field of the Elf*_Dyn structure.  This follows Sun's
-+   approach.  */
-+#define DT_VALRNGLO	0x6ffffd00
-+#define DT_GNU_PRELINKED 0x6ffffdf5	/* Prelinking timestamp */
-+#define DT_GNU_CONFLICTSZ 0x6ffffdf6	/* Size of conflict section */
-+#define DT_GNU_LIBLISTSZ 0x6ffffdf7	/* Size of library list */
-+#define DT_CHECKSUM	0x6ffffdf8
-+#define DT_PLTPADSZ	0x6ffffdf9
-+#define DT_MOVEENT	0x6ffffdfa
-+#define DT_MOVESZ	0x6ffffdfb
-+#define DT_FEATURE_1	0x6ffffdfc	/* Feature selection (DTF_*).  */
-+#define DT_POSFLAG_1	0x6ffffdfd	/* Flags for DT_* entries, effecting
-+					   the following DT_* entry.  */
-+#define DT_SYMINSZ	0x6ffffdfe	/* Size of syminfo table (in bytes) */
-+#define DT_SYMINENT	0x6ffffdff	/* Entry size of syminfo */
-+#define DT_VALRNGHI	0x6ffffdff
-+#define DT_VALTAGIDX(tag)	(DT_VALRNGHI - (tag))	/* Reverse order! */
-+#define DT_VALNUM 12
-+
-+/* DT_* entries which fall between DT_ADDRRNGHI & DT_ADDRRNGLO use the
-+   Dyn.d_un.d_ptr field of the Elf*_Dyn structure.
-+
-+   If any adjustment is made to the ELF object after it has been
-+   built these entries will need to be adjusted.  */
-+#define DT_ADDRRNGLO	0x6ffffe00
-+#define DT_GNU_HASH	0x6ffffef5	/* GNU-style hash table.  */
-+#define DT_TLSDESC_PLT	0x6ffffef6
-+#define DT_TLSDESC_GOT	0x6ffffef7
-+#define DT_GNU_CONFLICT	0x6ffffef8	/* Start of conflict section */
-+#define DT_GNU_LIBLIST	0x6ffffef9	/* Library list */
-+#define DT_CONFIG	0x6ffffefa	/* Configuration information.  */
-+#define DT_DEPAUDIT	0x6ffffefb	/* Dependency auditing.  */
-+#define DT_AUDIT	0x6ffffefc	/* Object auditing.  */
-+#define	DT_PLTPAD	0x6ffffefd	/* PLT padding.  */
-+#define	DT_MOVETAB	0x6ffffefe	/* Move table.  */
-+#define DT_SYMINFO	0x6ffffeff	/* Syminfo table.  */
-+#define DT_ADDRRNGHI	0x6ffffeff
-+#define DT_ADDRTAGIDX(tag)	(DT_ADDRRNGHI - (tag))	/* Reverse order! */
-+#define DT_ADDRNUM 11
-+
-+/* The versioning entry types.  The next are defined as part of the
-+   GNU extension.  */
-+#define DT_VERSYM	0x6ffffff0
-+
-+#define DT_RELACOUNT	0x6ffffff9
-+#define DT_RELCOUNT	0x6ffffffa
-+
-+/* These were chosen by Sun.  */
-+#define DT_FLAGS_1	0x6ffffffb	/* State flags, see DF_1_* below.  */
-+#define	DT_VERDEF	0x6ffffffc	/* Address of version definition
-+					   table */
-+#define	DT_VERDEFNUM	0x6ffffffd	/* Number of version definitions */
-+#define	DT_VERNEED	0x6ffffffe	/* Address of table with needed
-+					   versions */
-+#define	DT_VERNEEDNUM	0x6fffffff	/* Number of needed versions */
-+#define DT_VERSIONTAGIDX(tag)	(DT_VERNEEDNUM - (tag))	/* Reverse order! */
-+#define DT_VERSIONTAGNUM 16
-+
-+/* Sun added these machine-independent extensions in the "processor-specific"
-+   range.  Be compatible.  */
-+#define DT_AUXILIARY    0x7ffffffd      /* Shared object to load before self */
-+#define DT_FILTER       0x7fffffff      /* Shared object to get values from */
-+#define DT_EXTRATAGIDX(tag)	((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1)
-+#define DT_EXTRANUM	3
-+
-+/* Values of `d_un.d_val' in the DT_FLAGS entry.  */
-+#define DF_ORIGIN	0x00000001	/* Object may use DF_ORIGIN */
-+#define DF_SYMBOLIC	0x00000002	/* Symbol resolutions starts here */
-+#define DF_TEXTREL	0x00000004	/* Object contains text relocations */
-+#define DF_BIND_NOW	0x00000008	/* No lazy binding for this object */
-+#define DF_STATIC_TLS	0x00000010	/* Module uses the static TLS model */
-+
-+/* State flags selectable in the `d_un.d_val' element of the DT_FLAGS_1
-+   entry in the dynamic section.  */
-+#define DF_1_NOW	0x00000001	/* Set RTLD_NOW for this object.  */
-+#define DF_1_GLOBAL	0x00000002	/* Set RTLD_GLOBAL for this object.  */
-+#define DF_1_GROUP	0x00000004	/* Set RTLD_GROUP for this object.  */
-+#define DF_1_NODELETE	0x00000008	/* Set RTLD_NODELETE for this object.*/
-+#define DF_1_LOADFLTR	0x00000010	/* Trigger filtee loading at runtime.*/
-+#define DF_1_INITFIRST	0x00000020	/* Set RTLD_INITFIRST for this object*/
-+#define DF_1_NOOPEN	0x00000040	/* Set RTLD_NOOPEN for this object.  */
-+#define DF_1_ORIGIN	0x00000080	/* $ORIGIN must be handled.  */
-+#define DF_1_DIRECT	0x00000100	/* Direct binding enabled.  */
-+#define DF_1_TRANS	0x00000200
-+#define DF_1_INTERPOSE	0x00000400	/* Object is used to interpose.  */
-+#define DF_1_NODEFLIB	0x00000800	/* Ignore default lib search path.  */
-+#define DF_1_NODUMP	0x00001000	/* Object can't be dldump'ed.  */
-+#define DF_1_CONFALT	0x00002000	/* Configuration alternative created.*/
-+#define DF_1_ENDFILTEE	0x00004000	/* Filtee terminates filters search. */
-+#define	DF_1_DISPRELDNE	0x00008000	/* Disp reloc applied at build time. */
-+#define	DF_1_DISPRELPND	0x00010000	/* Disp reloc applied at run-time.  */
-+
-+/* Flags for the feature selection in DT_FEATURE_1.  */
-+#define DTF_1_PARINIT	0x00000001
-+#define DTF_1_CONFEXP	0x00000002
-+
-+/* Flags in the DT_POSFLAG_1 entry effecting only the next DT_* entry.  */
-+#define DF_P1_LAZYLOAD	0x00000001	/* Lazyload following object.  */
-+#define DF_P1_GROUPPERM	0x00000002	/* Symbols from next object are not
-+					   generally available.  */
-+
-+/* Version definition sections.  */
-+
-+typedef struct
-+{
-+  Elf32_Half	vd_version;		/* Version revision */
-+  Elf32_Half	vd_flags;		/* Version information */
-+  Elf32_Half	vd_ndx;			/* Version Index */
-+  Elf32_Half	vd_cnt;			/* Number of associated aux entries */
-+  Elf32_Word	vd_hash;		/* Version name hash value */
-+  Elf32_Word	vd_aux;			/* Offset in bytes to verdaux array */
-+  Elf32_Word	vd_next;		/* Offset in bytes to next verdef
-+					   entry */
-+} Elf32_Verdef;
-+
-+typedef struct
-+{
-+  Elf64_Half	vd_version;		/* Version revision */
-+  Elf64_Half	vd_flags;		/* Version information */
-+  Elf64_Half	vd_ndx;			/* Version Index */
-+  Elf64_Half	vd_cnt;			/* Number of associated aux entries */
-+  Elf64_Word	vd_hash;		/* Version name hash value */
-+  Elf64_Word	vd_aux;			/* Offset in bytes to verdaux array */
-+  Elf64_Word	vd_next;		/* Offset in bytes to next verdef
-+					   entry */
-+} Elf64_Verdef;
-+
-+
-+/* Legal values for vd_version (version revision).  */
-+#define VER_DEF_NONE	0		/* No version */
-+#define VER_DEF_CURRENT	1		/* Current version */
-+#define VER_DEF_NUM	2		/* Given version number */
-+
-+/* Legal values for vd_flags (version information flags).  */
-+#define VER_FLG_BASE	0x1		/* Version definition of file itself */
-+#define VER_FLG_WEAK	0x2		/* Weak version identifier */
-+
-+/* Versym symbol index values.  */
-+#define	VER_NDX_LOCAL		0	/* Symbol is local.  */
-+#define	VER_NDX_GLOBAL		1	/* Symbol is global.  */
-+#define	VER_NDX_LORESERVE	0xff00	/* Beginning of reserved entries.  */
-+#define	VER_NDX_ELIMINATE	0xff01	/* Symbol is to be eliminated.  */
-+
-+/* Auxialiary version information.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	vda_name;		/* Version or dependency names */
-+  Elf32_Word	vda_next;		/* Offset in bytes to next verdaux
-+					   entry */
-+} Elf32_Verdaux;
-+
-+typedef struct
-+{
-+  Elf64_Word	vda_name;		/* Version or dependency names */
-+  Elf64_Word	vda_next;		/* Offset in bytes to next verdaux
-+					   entry */
-+} Elf64_Verdaux;
-+
-+
-+/* Version dependency section.  */
-+
-+typedef struct
-+{
-+  Elf32_Half	vn_version;		/* Version of structure */
-+  Elf32_Half	vn_cnt;			/* Number of associated aux entries */
-+  Elf32_Word	vn_file;		/* Offset of filename for this
-+					   dependency */
-+  Elf32_Word	vn_aux;			/* Offset in bytes to vernaux array */
-+  Elf32_Word	vn_next;		/* Offset in bytes to next verneed
-+					   entry */
-+} Elf32_Verneed;
-+
-+typedef struct
-+{
-+  Elf64_Half	vn_version;		/* Version of structure */
-+  Elf64_Half	vn_cnt;			/* Number of associated aux entries */
-+  Elf64_Word	vn_file;		/* Offset of filename for this
-+					   dependency */
-+  Elf64_Word	vn_aux;			/* Offset in bytes to vernaux array */
-+  Elf64_Word	vn_next;		/* Offset in bytes to next verneed
-+					   entry */
-+} Elf64_Verneed;
-+
-+
-+/* Legal values for vn_version (version revision).  */
-+#define VER_NEED_NONE	 0		/* No version */
-+#define VER_NEED_CURRENT 1		/* Current version */
-+#define VER_NEED_NUM	 2		/* Given version number */
-+
-+/* Auxiliary needed version information.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	vna_hash;		/* Hash value of dependency name */
-+  Elf32_Half	vna_flags;		/* Dependency specific information */
-+  Elf32_Half	vna_other;		/* Unused */
-+  Elf32_Word	vna_name;		/* Dependency name string offset */
-+  Elf32_Word	vna_next;		/* Offset in bytes to next vernaux
-+					   entry */
-+} Elf32_Vernaux;
-+
-+typedef struct
-+{
-+  Elf64_Word	vna_hash;		/* Hash value of dependency name */
-+  Elf64_Half	vna_flags;		/* Dependency specific information */
-+  Elf64_Half	vna_other;		/* Unused */
-+  Elf64_Word	vna_name;		/* Dependency name string offset */
-+  Elf64_Word	vna_next;		/* Offset in bytes to next vernaux
-+					   entry */
-+} Elf64_Vernaux;
-+
-+
-+/* Legal values for vna_flags.  */
-+#define VER_FLG_WEAK	0x2		/* Weak version identifier */
-+
-+
-+/* Auxiliary vector.  */
-+
-+/* This vector is normally only used by the program interpreter.  The
-+   usual definition in an ABI supplement uses the name auxv_t.  The
-+   vector is not usually defined in a standard <elf.h> file, but it
-+   can't hurt.  We rename it to avoid conflicts.  The sizes of these
-+   types are an arrangement between the exec server and the program
-+   interpreter, so we don't fully specify them here.  */
-+
-+typedef struct
-+{
-+  uint32_t a_type;		/* Entry type */
-+  union
-+    {
-+      uint32_t a_val;		/* Integer value */
-+      /* We use to have pointer elements added here.  We cannot do that,
-+	 though, since it does not work when using 32-bit definitions
-+	 on 64-bit platforms and vice versa.  */
-+    } a_un;
-+} Elf32_auxv_t;
-+
-+typedef struct
-+{
-+  uint64_t a_type;		/* Entry type */
-+  union
-+    {
-+      uint64_t a_val;		/* Integer value */
-+      /* We use to have pointer elements added here.  We cannot do that,
-+	 though, since it does not work when using 32-bit definitions
-+	 on 64-bit platforms and vice versa.  */
-+    } a_un;
-+} Elf64_auxv_t;
-+
-+/* Legal values for a_type (entry type).  */
-+
-+#define AT_NULL		0		/* End of vector */
-+#define AT_IGNORE	1		/* Entry should be ignored */
-+#define AT_EXECFD	2		/* File descriptor of program */
-+#define AT_PHDR		3		/* Program headers for program */
-+#define AT_PHENT	4		/* Size of program header entry */
-+#define AT_PHNUM	5		/* Number of program headers */
-+#define AT_PAGESZ	6		/* System page size */
-+#define AT_BASE		7		/* Base address of interpreter */
-+#define AT_FLAGS	8		/* Flags */
-+#define AT_ENTRY	9		/* Entry point of program */
-+#define AT_NOTELF	10		/* Program is not ELF */
-+#define AT_UID		11		/* Real uid */
-+#define AT_EUID		12		/* Effective uid */
-+#define AT_GID		13		/* Real gid */
-+#define AT_EGID		14		/* Effective gid */
-+#define AT_CLKTCK	17		/* Frequency of times() */
-+
-+/* Some more special a_type values describing the hardware.  */
-+#define AT_PLATFORM	15		/* String identifying platform.  */
-+#define AT_HWCAP	16		/* Machine dependent hints about
-+					   processor capabilities.  */
-+
-+/* This entry gives some information about the FPU initialization
-+   performed by the kernel.  */
-+#define AT_FPUCW	18		/* Used FPU control word.  */
-+
-+/* Cache block sizes.  */
-+#define AT_DCACHEBSIZE	19		/* Data cache block size.  */
-+#define AT_ICACHEBSIZE	20		/* Instruction cache block size.  */
-+#define AT_UCACHEBSIZE	21		/* Unified cache block size.  */
-+
-+/* A special ignored value for PPC, used by the kernel to control the
-+   interpretation of the AUXV. Must be > 16.  */
-+#define AT_IGNOREPPC	22		/* Entry should be ignored.  */
-+
-+#define	AT_SECURE	23		/* Boolean, was exec setuid-like?  */
-+
-+#define AT_BASE_PLATFORM 24		/* String identifying real platforms.*/
-+
-+#define AT_RANDOM	25		/* Address of 16 random bytes.  */
-+
-+#define AT_EXECFN	31		/* Filename of executable.  */
-+
-+/* Pointer to the global system page used for system calls and other
-+   nice things.  */
-+#define AT_SYSINFO	32
-+#define AT_SYSINFO_EHDR	33
-+
-+/* Shapes of the caches.  Bits 0-3 contains associativity; bits 4-7 contains
-+   log2 of line size; mask those to get cache size.  */
-+#define AT_L1I_CACHESHAPE	34
-+#define AT_L1D_CACHESHAPE	35
-+#define AT_L2_CACHESHAPE	36
-+#define AT_L3_CACHESHAPE	37
-+
-+/* Note section contents.  Each entry in the note section begins with
-+   a header of a fixed form.  */
-+
-+typedef struct
-+{
-+  Elf32_Word n_namesz;			/* Length of the note's name.  */
-+  Elf32_Word n_descsz;			/* Length of the note's descriptor.  */
-+  Elf32_Word n_type;			/* Type of the note.  */
-+} Elf32_Nhdr;
-+
-+typedef struct
-+{
-+  Elf64_Word n_namesz;			/* Length of the note's name.  */
-+  Elf64_Word n_descsz;			/* Length of the note's descriptor.  */
-+  Elf64_Word n_type;			/* Type of the note.  */
-+} Elf64_Nhdr;
-+
-+/* Known names of notes.  */
-+
-+/* Solaris entries in the note section have this name.  */
-+#define ELF_NOTE_SOLARIS	"SUNW Solaris"
-+
-+/* Note entries for GNU systems have this name.  */
-+#define ELF_NOTE_GNU		"GNU"
-+
-+
-+/* Defined types of notes for Solaris.  */
-+
-+/* Value of descriptor (one word) is desired pagesize for the binary.  */
-+#define ELF_NOTE_PAGESIZE_HINT	1
-+
-+
-+/* Defined note types for GNU systems.  */
-+
-+/* ABI information.  The descriptor consists of words:
-+   word 0: OS descriptor
-+   word 1: major version of the ABI
-+   word 2: minor version of the ABI
-+   word 3: subminor version of the ABI
-+*/
-+#define NT_GNU_ABI_TAG	1
-+#define ELF_NOTE_ABI	NT_GNU_ABI_TAG /* Old name.  */
-+
-+/* Known OSes.  These values can appear in word 0 of an
-+   NT_GNU_ABI_TAG note section entry.  */
-+#define ELF_NOTE_OS_LINUX	0
-+#define ELF_NOTE_OS_GNU		1
-+#define ELF_NOTE_OS_SOLARIS2	2
-+#define ELF_NOTE_OS_FREEBSD	3
-+
-+/* Synthetic hwcap information.  The descriptor begins with two words:
-+   word 0: number of entries
-+   word 1: bitmask of enabled entries
-+   Then follow variable-length entries, one byte followed by a
-+   '\0'-terminated hwcap name string.  The byte gives the bit
-+   number to test if enabled, (1U << bit) & bitmask.  */
-+#define NT_GNU_HWCAP	2
-+
-+/* Build ID bits as generated by ld --build-id.
-+   The descriptor consists of any nonzero number of bytes.  */
-+#define NT_GNU_BUILD_ID	3
-+
-+/* Version note generated by GNU gold containing a version string.  */
-+#define NT_GNU_GOLD_VERSION	4
-+
-+
-+/* Move records.  */
-+typedef struct
-+{
-+  Elf32_Xword m_value;		/* Symbol value.  */
-+  Elf32_Word m_info;		/* Size and index.  */
-+  Elf32_Word m_poffset;		/* Symbol offset.  */
-+  Elf32_Half m_repeat;		/* Repeat count.  */
-+  Elf32_Half m_stride;		/* Stride info.  */
-+} Elf32_Move;
-+
-+typedef struct
-+{
-+  Elf64_Xword m_value;		/* Symbol value.  */
-+  Elf64_Xword m_info;		/* Size and index.  */
-+  Elf64_Xword m_poffset;	/* Symbol offset.  */
-+  Elf64_Half m_repeat;		/* Repeat count.  */
-+  Elf64_Half m_stride;		/* Stride info.  */
-+} Elf64_Move;
-+
-+/* Macro to construct move records.  */
-+#define ELF32_M_SYM(info)	((info) >> 8)
-+#define ELF32_M_SIZE(info)	((unsigned char) (info))
-+#define ELF32_M_INFO(sym, size)	(((sym) << 8) + (unsigned char) (size))
-+
-+#define ELF64_M_SYM(info)	ELF32_M_SYM (info)
-+#define ELF64_M_SIZE(info)	ELF32_M_SIZE (info)
-+#define ELF64_M_INFO(sym, size)	ELF32_M_INFO (sym, size)
-+
-+
-+/* Motorola 68k specific definitions.  */
-+
-+/* Values for Elf32_Ehdr.e_flags.  */
-+#define EF_CPU32	0x00810000
-+
-+/* m68k relocs.  */
-+
-+#define R_68K_NONE	0		/* No reloc */
-+#define R_68K_32	1		/* Direct 32 bit  */
-+#define R_68K_16	2		/* Direct 16 bit  */
-+#define R_68K_8		3		/* Direct 8 bit  */
-+#define R_68K_PC32	4		/* PC relative 32 bit */
-+#define R_68K_PC16	5		/* PC relative 16 bit */
-+#define R_68K_PC8	6		/* PC relative 8 bit */
-+#define R_68K_GOT32	7		/* 32 bit PC relative GOT entry */
-+#define R_68K_GOT16	8		/* 16 bit PC relative GOT entry */
-+#define R_68K_GOT8	9		/* 8 bit PC relative GOT entry */
-+#define R_68K_GOT32O	10		/* 32 bit GOT offset */
-+#define R_68K_GOT16O	11		/* 16 bit GOT offset */
-+#define R_68K_GOT8O	12		/* 8 bit GOT offset */
-+#define R_68K_PLT32	13		/* 32 bit PC relative PLT address */
-+#define R_68K_PLT16	14		/* 16 bit PC relative PLT address */
-+#define R_68K_PLT8	15		/* 8 bit PC relative PLT address */
-+#define R_68K_PLT32O	16		/* 32 bit PLT offset */
-+#define R_68K_PLT16O	17		/* 16 bit PLT offset */
-+#define R_68K_PLT8O	18		/* 8 bit PLT offset */
-+#define R_68K_COPY	19		/* Copy symbol at runtime */
-+#define R_68K_GLOB_DAT	20		/* Create GOT entry */
-+#define R_68K_JMP_SLOT	21		/* Create PLT entry */
-+#define R_68K_RELATIVE	22		/* Adjust by program base */
-+#define R_68K_TLS_GD32      25          /* 32 bit GOT offset for GD */
-+#define R_68K_TLS_GD16      26          /* 16 bit GOT offset for GD */
-+#define R_68K_TLS_GD8       27          /* 8 bit GOT offset for GD */
-+#define R_68K_TLS_LDM32     28          /* 32 bit GOT offset for LDM */
-+#define R_68K_TLS_LDM16     29          /* 16 bit GOT offset for LDM */
-+#define R_68K_TLS_LDM8      30          /* 8 bit GOT offset for LDM */
-+#define R_68K_TLS_LDO32     31          /* 32 bit module-relative offset */
-+#define R_68K_TLS_LDO16     32          /* 16 bit module-relative offset */
-+#define R_68K_TLS_LDO8      33          /* 8 bit module-relative offset */
-+#define R_68K_TLS_IE32      34          /* 32 bit GOT offset for IE */
-+#define R_68K_TLS_IE16      35          /* 16 bit GOT offset for IE */
-+#define R_68K_TLS_IE8       36          /* 8 bit GOT offset for IE */
-+#define R_68K_TLS_LE32      37          /* 32 bit offset relative to
-+					   static TLS block */
-+#define R_68K_TLS_LE16      38          /* 16 bit offset relative to
-+					   static TLS block */
-+#define R_68K_TLS_LE8       39          /* 8 bit offset relative to
-+					   static TLS block */
-+#define R_68K_TLS_DTPMOD32  40          /* 32 bit module number */
-+#define R_68K_TLS_DTPREL32  41          /* 32 bit module-relative offset */
-+#define R_68K_TLS_TPREL32   42          /* 32 bit TP-relative offset */
-+/* Keep this the last entry.  */
-+#define R_68K_NUM	43
-+
-+/* Intel 80386 specific definitions.  */
-+
-+/* i386 relocs.  */
-+
-+#define R_386_NONE	   0		/* No reloc */
-+#define R_386_32	   1		/* Direct 32 bit  */
-+#define R_386_PC32	   2		/* PC relative 32 bit */
-+#define R_386_GOT32	   3		/* 32 bit GOT entry */
-+#define R_386_PLT32	   4		/* 32 bit PLT address */
-+#define R_386_COPY	   5		/* Copy symbol at runtime */
-+#define R_386_GLOB_DAT	   6		/* Create GOT entry */
-+#define R_386_JMP_SLOT	   7		/* Create PLT entry */
-+#define R_386_RELATIVE	   8		/* Adjust by program base */
-+#define R_386_GOTOFF	   9		/* 32 bit offset to GOT */
-+#define R_386_GOTPC	   10		/* 32 bit PC relative offset to GOT */
-+#define R_386_32PLT	   11
-+#define R_386_TLS_TPOFF	   14		/* Offset in static TLS block */
-+#define R_386_TLS_IE	   15		/* Address of GOT entry for static TLS
-+					   block offset */
-+#define R_386_TLS_GOTIE	   16		/* GOT entry for static TLS block
-+					   offset */
-+#define R_386_TLS_LE	   17		/* Offset relative to static TLS
-+					   block */
-+#define R_386_TLS_GD	   18		/* Direct 32 bit for GNU version of
-+					   general dynamic thread local data */
-+#define R_386_TLS_LDM	   19		/* Direct 32 bit for GNU version of
-+					   local dynamic thread local data
-+					   in LE code */
-+#define R_386_16	   20
-+#define R_386_PC16	   21
-+#define R_386_8		   22
-+#define R_386_PC8	   23
-+#define R_386_TLS_GD_32	   24		/* Direct 32 bit for general dynamic
-+					   thread local data */
-+#define R_386_TLS_GD_PUSH  25		/* Tag for pushl in GD TLS code */
-+#define R_386_TLS_GD_CALL  26		/* Relocation for call to
-+					   __tls_get_addr() */
-+#define R_386_TLS_GD_POP   27		/* Tag for popl in GD TLS code */
-+#define R_386_TLS_LDM_32   28		/* Direct 32 bit for local dynamic
-+					   thread local data in LE code */
-+#define R_386_TLS_LDM_PUSH 29		/* Tag for pushl in LDM TLS code */
-+#define R_386_TLS_LDM_CALL 30		/* Relocation for call to
-+					   __tls_get_addr() in LDM code */
-+#define R_386_TLS_LDM_POP  31		/* Tag for popl in LDM TLS code */
-+#define R_386_TLS_LDO_32   32		/* Offset relative to TLS block */
-+#define R_386_TLS_IE_32	   33		/* GOT entry for negated static TLS
-+					   block offset */
-+#define R_386_TLS_LE_32	   34		/* Negated offset relative to static
-+					   TLS block */
-+#define R_386_TLS_DTPMOD32 35		/* ID of module containing symbol */
-+#define R_386_TLS_DTPOFF32 36		/* Offset in TLS block */
-+#define R_386_TLS_TPOFF32  37		/* Negated offset in static TLS block */
-+/* 38? */
-+#define R_386_TLS_GOTDESC  39		/* GOT offset for TLS descriptor.  */
-+#define R_386_TLS_DESC_CALL 40		/* Marker of call through TLS
-+					   descriptor for
-+					   relaxation.  */
-+#define R_386_TLS_DESC     41		/* TLS descriptor containing
-+					   pointer to code and to
-+					   argument, returning the TLS
-+					   offset for the symbol.  */
-+#define R_386_IRELATIVE	   42		/* Adjust indirectly by program base */
-+/* Keep this the last entry.  */
-+#define R_386_NUM	   43
-+
-+/* SUN SPARC specific definitions.  */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
-+
-+#define STT_SPARC_REGISTER	13	/* Global register reserved to app. */
-+
-+/* Values for Elf64_Ehdr.e_flags.  */
-+
-+#define EF_SPARCV9_MM		3
-+#define EF_SPARCV9_TSO		0
-+#define EF_SPARCV9_PSO		1
-+#define EF_SPARCV9_RMO		2
-+#define EF_SPARC_LEDATA		0x800000 /* little endian data */
-+#define EF_SPARC_EXT_MASK	0xFFFF00
-+#define EF_SPARC_32PLUS		0x000100 /* generic V8+ features */
-+#define EF_SPARC_SUN_US1	0x000200 /* Sun UltraSPARC1 extensions */
-+#define EF_SPARC_HAL_R1		0x000400 /* HAL R1 extensions */
-+#define EF_SPARC_SUN_US3	0x000800 /* Sun UltraSPARCIII extensions */
-+
-+/* SPARC relocs.  */
-+
-+#define R_SPARC_NONE		0	/* No reloc */
-+#define R_SPARC_8		1	/* Direct 8 bit */
-+#define R_SPARC_16		2	/* Direct 16 bit */
-+#define R_SPARC_32		3	/* Direct 32 bit */
-+#define R_SPARC_DISP8		4	/* PC relative 8 bit */
-+#define R_SPARC_DISP16		5	/* PC relative 16 bit */
-+#define R_SPARC_DISP32		6	/* PC relative 32 bit */
-+#define R_SPARC_WDISP30		7	/* PC relative 30 bit shifted */
-+#define R_SPARC_WDISP22		8	/* PC relative 22 bit shifted */
-+#define R_SPARC_HI22		9	/* High 22 bit */
-+#define R_SPARC_22		10	/* Direct 22 bit */
-+#define R_SPARC_13		11	/* Direct 13 bit */
-+#define R_SPARC_LO10		12	/* Truncated 10 bit */
-+#define R_SPARC_GOT10		13	/* Truncated 10 bit GOT entry */
-+#define R_SPARC_GOT13		14	/* 13 bit GOT entry */
-+#define R_SPARC_GOT22		15	/* 22 bit GOT entry shifted */
-+#define R_SPARC_PC10		16	/* PC relative 10 bit truncated */
-+#define R_SPARC_PC22		17	/* PC relative 22 bit shifted */
-+#define R_SPARC_WPLT30		18	/* 30 bit PC relative PLT address */
-+#define R_SPARC_COPY		19	/* Copy symbol at runtime */
-+#define R_SPARC_GLOB_DAT	20	/* Create GOT entry */
-+#define R_SPARC_JMP_SLOT	21	/* Create PLT entry */
-+#define R_SPARC_RELATIVE	22	/* Adjust by program base */
-+#define R_SPARC_UA32		23	/* Direct 32 bit unaligned */
-+
-+/* Additional Sparc64 relocs.  */
-+
-+#define R_SPARC_PLT32		24	/* Direct 32 bit ref to PLT entry */
-+#define R_SPARC_HIPLT22		25	/* High 22 bit PLT entry */
-+#define R_SPARC_LOPLT10		26	/* Truncated 10 bit PLT entry */
-+#define R_SPARC_PCPLT32		27	/* PC rel 32 bit ref to PLT entry */
-+#define R_SPARC_PCPLT22		28	/* PC rel high 22 bit PLT entry */
-+#define R_SPARC_PCPLT10		29	/* PC rel trunc 10 bit PLT entry */
-+#define R_SPARC_10		30	/* Direct 10 bit */
-+#define R_SPARC_11		31	/* Direct 11 bit */
-+#define R_SPARC_64		32	/* Direct 64 bit */
-+#define R_SPARC_OLO10		33	/* 10bit with secondary 13bit addend */
-+#define R_SPARC_HH22		34	/* Top 22 bits of direct 64 bit */
-+#define R_SPARC_HM10		35	/* High middle 10 bits of ... */
-+#define R_SPARC_LM22		36	/* Low middle 22 bits of ... */
-+#define R_SPARC_PC_HH22		37	/* Top 22 bits of pc rel 64 bit */
-+#define R_SPARC_PC_HM10		38	/* High middle 10 bit of ... */
-+#define R_SPARC_PC_LM22		39	/* Low miggle 22 bits of ... */
-+#define R_SPARC_WDISP16		40	/* PC relative 16 bit shifted */
-+#define R_SPARC_WDISP19		41	/* PC relative 19 bit shifted */
-+#define R_SPARC_GLOB_JMP	42	/* was part of v9 ABI but was removed */
-+#define R_SPARC_7		43	/* Direct 7 bit */
-+#define R_SPARC_5		44	/* Direct 5 bit */
-+#define R_SPARC_6		45	/* Direct 6 bit */
-+#define R_SPARC_DISP64		46	/* PC relative 64 bit */
-+#define R_SPARC_PLT64		47	/* Direct 64 bit ref to PLT entry */
-+#define R_SPARC_HIX22		48	/* High 22 bit complemented */
-+#define R_SPARC_LOX10		49	/* Truncated 11 bit complemented */
-+#define R_SPARC_H44		50	/* Direct high 12 of 44 bit */
-+#define R_SPARC_M44		51	/* Direct mid 22 of 44 bit */
-+#define R_SPARC_L44		52	/* Direct low 10 of 44 bit */
-+#define R_SPARC_REGISTER	53	/* Global register usage */
-+#define R_SPARC_UA64		54	/* Direct 64 bit unaligned */
-+#define R_SPARC_UA16		55	/* Direct 16 bit unaligned */
-+#define R_SPARC_TLS_GD_HI22	56
-+#define R_SPARC_TLS_GD_LO10	57
-+#define R_SPARC_TLS_GD_ADD	58
-+#define R_SPARC_TLS_GD_CALL	59
-+#define R_SPARC_TLS_LDM_HI22	60
-+#define R_SPARC_TLS_LDM_LO10	61
-+#define R_SPARC_TLS_LDM_ADD	62
-+#define R_SPARC_TLS_LDM_CALL	63
-+#define R_SPARC_TLS_LDO_HIX22	64
-+#define R_SPARC_TLS_LDO_LOX10	65
-+#define R_SPARC_TLS_LDO_ADD	66
-+#define R_SPARC_TLS_IE_HI22	67
-+#define R_SPARC_TLS_IE_LO10	68
-+#define R_SPARC_TLS_IE_LD	69
-+#define R_SPARC_TLS_IE_LDX	70
-+#define R_SPARC_TLS_IE_ADD	71
-+#define R_SPARC_TLS_LE_HIX22	72
-+#define R_SPARC_TLS_LE_LOX10	73
-+#define R_SPARC_TLS_DTPMOD32	74
-+#define R_SPARC_TLS_DTPMOD64	75
-+#define R_SPARC_TLS_DTPOFF32	76
-+#define R_SPARC_TLS_DTPOFF64	77
-+#define R_SPARC_TLS_TPOFF32	78
-+#define R_SPARC_TLS_TPOFF64	79
-+#define R_SPARC_GOTDATA_HIX22	80
-+#define R_SPARC_GOTDATA_LOX10	81
-+#define R_SPARC_GOTDATA_OP_HIX22	82
-+#define R_SPARC_GOTDATA_OP_LOX10	83
-+#define R_SPARC_GOTDATA_OP	84
-+#define R_SPARC_H34		85
-+#define R_SPARC_SIZE32		86
-+#define R_SPARC_SIZE64		87
-+#define R_SPARC_WDISP10		88
-+#define R_SPARC_JMP_IREL	248
-+#define R_SPARC_IRELATIVE	249
-+#define R_SPARC_GNU_VTINHERIT	250
-+#define R_SPARC_GNU_VTENTRY	251
-+#define R_SPARC_REV32		252
-+/* Keep this the last entry.  */
-+#define R_SPARC_NUM		253
-+
-+/* For Sparc64, legal values for d_tag of Elf64_Dyn.  */
-+
-+#define DT_SPARC_REGISTER 0x70000001
-+#define DT_SPARC_NUM	2
-+
-+/* MIPS R3000 specific definitions.  */
-+
-+/* Legal values for e_flags field of Elf32_Ehdr.  */
-+
-+#define EF_MIPS_NOREORDER   1		/* A .noreorder directive was used */
-+#define EF_MIPS_PIC	    2		/* Contains PIC code */
-+#define EF_MIPS_CPIC	    4		/* Uses PIC calling sequence */
-+#define EF_MIPS_XGOT	    8
-+#define EF_MIPS_64BIT_WHIRL 16
-+#define EF_MIPS_ABI2	    32
-+#define EF_MIPS_ABI_ON32    64
-+#define EF_MIPS_ARCH	    0xf0000000	/* MIPS architecture level */
-+
-+/* Legal values for MIPS architecture level.  */
-+
-+#define EF_MIPS_ARCH_1	    0x00000000	/* -mips1 code.  */
-+#define EF_MIPS_ARCH_2	    0x10000000	/* -mips2 code.  */
-+#define EF_MIPS_ARCH_3	    0x20000000	/* -mips3 code.  */
-+#define EF_MIPS_ARCH_4	    0x30000000	/* -mips4 code.  */
-+#define EF_MIPS_ARCH_5	    0x40000000	/* -mips5 code.  */
-+#define EF_MIPS_ARCH_32	    0x60000000	/* MIPS32 code.  */
-+#define EF_MIPS_ARCH_64	    0x70000000	/* MIPS64 code.  */
-+
-+/* The following are non-official names and should not be used.  */
-+
-+#define E_MIPS_ARCH_1	  0x00000000	/* -mips1 code.  */
-+#define E_MIPS_ARCH_2	  0x10000000	/* -mips2 code.  */
-+#define E_MIPS_ARCH_3	  0x20000000	/* -mips3 code.  */
-+#define E_MIPS_ARCH_4	  0x30000000	/* -mips4 code.  */
-+#define E_MIPS_ARCH_5	  0x40000000	/* -mips5 code.  */
-+#define E_MIPS_ARCH_32	  0x60000000	/* MIPS32 code.  */
-+#define E_MIPS_ARCH_64	  0x70000000	/* MIPS64 code.  */
-+
-+/* Special section indices.  */
-+
-+#define SHN_MIPS_ACOMMON    0xff00	/* Allocated common symbols */
-+#define SHN_MIPS_TEXT	    0xff01	/* Allocated test symbols.  */
-+#define SHN_MIPS_DATA	    0xff02	/* Allocated data symbols.  */
-+#define SHN_MIPS_SCOMMON    0xff03	/* Small common symbols */
-+#define SHN_MIPS_SUNDEFINED 0xff04	/* Small undefined symbols */
-+
-+/* Legal values for sh_type field of Elf32_Shdr.  */
-+
-+#define SHT_MIPS_LIBLIST       0x70000000 /* Shared objects used in link */
-+#define SHT_MIPS_MSYM	       0x70000001
-+#define SHT_MIPS_CONFLICT      0x70000002 /* Conflicting symbols */
-+#define SHT_MIPS_GPTAB	       0x70000003 /* Global data area sizes */
-+#define SHT_MIPS_UCODE	       0x70000004 /* Reserved for SGI/MIPS compilers */
-+#define SHT_MIPS_DEBUG	       0x70000005 /* MIPS ECOFF debugging information*/
-+#define SHT_MIPS_REGINFO       0x70000006 /* Register usage information */
-+#define SHT_MIPS_PACKAGE       0x70000007
-+#define SHT_MIPS_PACKSYM       0x70000008
-+#define SHT_MIPS_RELD	       0x70000009
-+#define SHT_MIPS_IFACE         0x7000000b
-+#define SHT_MIPS_CONTENT       0x7000000c
-+#define SHT_MIPS_OPTIONS       0x7000000d /* Miscellaneous options.  */
-+#define SHT_MIPS_SHDR	       0x70000010
-+#define SHT_MIPS_FDESC	       0x70000011
-+#define SHT_MIPS_EXTSYM	       0x70000012
-+#define SHT_MIPS_DENSE	       0x70000013
-+#define SHT_MIPS_PDESC	       0x70000014
-+#define SHT_MIPS_LOCSYM	       0x70000015
-+#define SHT_MIPS_AUXSYM	       0x70000016
-+#define SHT_MIPS_OPTSYM	       0x70000017
-+#define SHT_MIPS_LOCSTR	       0x70000018
-+#define SHT_MIPS_LINE	       0x70000019
-+#define SHT_MIPS_RFDESC	       0x7000001a
-+#define SHT_MIPS_DELTASYM      0x7000001b
-+#define SHT_MIPS_DELTAINST     0x7000001c
-+#define SHT_MIPS_DELTACLASS    0x7000001d
-+#define SHT_MIPS_DWARF         0x7000001e /* DWARF debugging information.  */
-+#define SHT_MIPS_DELTADECL     0x7000001f
-+#define SHT_MIPS_SYMBOL_LIB    0x70000020
-+#define SHT_MIPS_EVENTS	       0x70000021 /* Event section.  */
-+#define SHT_MIPS_TRANSLATE     0x70000022
-+#define SHT_MIPS_PIXIE	       0x70000023
-+#define SHT_MIPS_XLATE	       0x70000024
-+#define SHT_MIPS_XLATE_DEBUG   0x70000025
-+#define SHT_MIPS_WHIRL	       0x70000026
-+#define SHT_MIPS_EH_REGION     0x70000027
-+#define SHT_MIPS_XLATE_OLD     0x70000028
-+#define SHT_MIPS_PDR_EXCEPTION 0x70000029
-+
-+/* Legal values for sh_flags field of Elf32_Shdr.  */
-+
-+#define SHF_MIPS_GPREL	 0x10000000	/* Must be part of global data area */
-+#define SHF_MIPS_MERGE	 0x20000000
-+#define SHF_MIPS_ADDR	 0x40000000
-+#define SHF_MIPS_STRINGS 0x80000000
-+#define SHF_MIPS_NOSTRIP 0x08000000
-+#define SHF_MIPS_LOCAL	 0x04000000
-+#define SHF_MIPS_NAMES	 0x02000000
-+#define SHF_MIPS_NODUPE	 0x01000000
-+
-+
-+/* Symbol tables.  */
-+
-+/* MIPS specific values for `st_other'.  */
-+#define STO_MIPS_DEFAULT		0x0
-+#define STO_MIPS_INTERNAL		0x1
-+#define STO_MIPS_HIDDEN			0x2
-+#define STO_MIPS_PROTECTED		0x3
-+#define STO_MIPS_PLT			0x8
-+#define STO_MIPS_SC_ALIGN_UNUSED	0xff
-+
-+/* MIPS specific values for `st_info'.  */
-+#define STB_MIPS_SPLIT_COMMON		13
-+
-+/* Entries found in sections of type SHT_MIPS_GPTAB.  */
-+
-+typedef union
-+{
-+  struct
-+    {
-+      Elf32_Word gt_current_g_value;	/* -G value used for compilation */
-+      Elf32_Word gt_unused;		/* Not used */
-+    } gt_header;			/* First entry in section */
-+  struct
-+    {
-+      Elf32_Word gt_g_value;		/* If this value were used for -G */
-+      Elf32_Word gt_bytes;		/* This many bytes would be used */
-+    } gt_entry;				/* Subsequent entries in section */
-+} Elf32_gptab;
-+
-+/* Entry found in sections of type SHT_MIPS_REGINFO.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	ri_gprmask;		/* General registers used */
-+  Elf32_Word	ri_cprmask[4];		/* Coprocessor registers used */
-+  Elf32_Sword	ri_gp_value;		/* $gp register value */
-+} Elf32_RegInfo;
-+
-+/* Entries found in sections of type SHT_MIPS_OPTIONS.  */
-+
-+typedef struct
-+{
-+  unsigned char kind;		/* Determines interpretation of the
-+				   variable part of descriptor.  */
-+  unsigned char size;		/* Size of descriptor, including header.  */
-+  Elf32_Section section;	/* Section header index of section affected,
-+				   0 for global options.  */
-+  Elf32_Word info;		/* Kind-specific information.  */
-+} Elf_Options;
-+
-+/* Values for `kind' field in Elf_Options.  */
-+
-+#define ODK_NULL	0	/* Undefined.  */
-+#define ODK_REGINFO	1	/* Register usage information.  */
-+#define ODK_EXCEPTIONS	2	/* Exception processing options.  */
-+#define ODK_PAD		3	/* Section padding options.  */
-+#define ODK_HWPATCH	4	/* Hardware workarounds performed */
-+#define ODK_FILL	5	/* record the fill value used by the linker. */
-+#define ODK_TAGS	6	/* reserve space for desktop tools to write. */
-+#define ODK_HWAND	7	/* HW workarounds.  'AND' bits when merging. */
-+#define ODK_HWOR	8	/* HW workarounds.  'OR' bits when merging.  */
-+
-+/* Values for `info' in Elf_Options for ODK_EXCEPTIONS entries.  */
-+
-+#define OEX_FPU_MIN	0x1f	/* FPE's which MUST be enabled.  */
-+#define OEX_FPU_MAX	0x1f00	/* FPE's which MAY be enabled.  */
-+#define OEX_PAGE0	0x10000	/* page zero must be mapped.  */
-+#define OEX_SMM		0x20000	/* Force sequential memory mode?  */
-+#define OEX_FPDBUG	0x40000	/* Force floating point debug mode?  */
-+#define OEX_PRECISEFP	OEX_FPDBUG
-+#define OEX_DISMISS	0x80000	/* Dismiss invalid address faults?  */
-+
-+#define OEX_FPU_INVAL	0x10
-+#define OEX_FPU_DIV0	0x08
-+#define OEX_FPU_OFLO	0x04
-+#define OEX_FPU_UFLO	0x02
-+#define OEX_FPU_INEX	0x01
-+
-+/* Masks for `info' in Elf_Options for an ODK_HWPATCH entry.  */
-+
-+#define OHW_R4KEOP	0x1	/* R4000 end-of-page patch.  */
-+#define OHW_R8KPFETCH	0x2	/* may need R8000 prefetch patch.  */
-+#define OHW_R5KEOP	0x4	/* R5000 end-of-page patch.  */
-+#define OHW_R5KCVTL	0x8	/* R5000 cvt.[ds].l bug.  clean=1.  */
-+
-+#define OPAD_PREFIX	0x1
-+#define OPAD_POSTFIX	0x2
-+#define OPAD_SYMBOL	0x4
-+
-+/* Entry found in `.options' section.  */
-+
-+typedef struct
-+{
-+  Elf32_Word hwp_flags1;	/* Extra flags.  */
-+  Elf32_Word hwp_flags2;	/* Extra flags.  */
-+} Elf_Options_Hw;
-+
-+/* Masks for `info' in ElfOptions for ODK_HWAND and ODK_HWOR entries.  */
-+
-+#define OHWA0_R4KEOP_CHECKED	0x00000001
-+#define OHWA1_R4KEOP_CLEAN	0x00000002
-+
-+/* MIPS relocs.  */
-+
-+#define R_MIPS_NONE		0	/* No reloc */
-+#define R_MIPS_16		1	/* Direct 16 bit */
-+#define R_MIPS_32		2	/* Direct 32 bit */
-+#define R_MIPS_REL32		3	/* PC relative 32 bit */
-+#define R_MIPS_26		4	/* Direct 26 bit shifted */
-+#define R_MIPS_HI16		5	/* High 16 bit */
-+#define R_MIPS_LO16		6	/* Low 16 bit */
-+#define R_MIPS_GPREL16		7	/* GP relative 16 bit */
-+#define R_MIPS_LITERAL		8	/* 16 bit literal entry */
-+#define R_MIPS_GOT16		9	/* 16 bit GOT entry */
-+#define R_MIPS_PC16		10	/* PC relative 16 bit */
-+#define R_MIPS_CALL16		11	/* 16 bit GOT entry for function */
-+#define R_MIPS_GPREL32		12	/* GP relative 32 bit */
-+
-+#define R_MIPS_SHIFT5		16
-+#define R_MIPS_SHIFT6		17
-+#define R_MIPS_64		18
-+#define R_MIPS_GOT_DISP		19
-+#define R_MIPS_GOT_PAGE		20
-+#define R_MIPS_GOT_OFST		21
-+#define R_MIPS_GOT_HI16		22
-+#define R_MIPS_GOT_LO16		23
-+#define R_MIPS_SUB		24
-+#define R_MIPS_INSERT_A		25
-+#define R_MIPS_INSERT_B		26
-+#define R_MIPS_DELETE		27
-+#define R_MIPS_HIGHER		28
-+#define R_MIPS_HIGHEST		29
-+#define R_MIPS_CALL_HI16	30
-+#define R_MIPS_CALL_LO16	31
-+#define R_MIPS_SCN_DISP		32
-+#define R_MIPS_REL16		33
-+#define R_MIPS_ADD_IMMEDIATE	34
-+#define R_MIPS_PJUMP		35
-+#define R_MIPS_RELGOT		36
-+#define R_MIPS_JALR		37
-+#define R_MIPS_TLS_DTPMOD32	38	/* Module number 32 bit */
-+#define R_MIPS_TLS_DTPREL32	39	/* Module-relative offset 32 bit */
-+#define R_MIPS_TLS_DTPMOD64	40	/* Module number 64 bit */
-+#define R_MIPS_TLS_DTPREL64	41	/* Module-relative offset 64 bit */
-+#define R_MIPS_TLS_GD		42	/* 16 bit GOT offset for GD */
-+#define R_MIPS_TLS_LDM		43	/* 16 bit GOT offset for LDM */
-+#define R_MIPS_TLS_DTPREL_HI16	44	/* Module-relative offset, high 16 bits */
-+#define R_MIPS_TLS_DTPREL_LO16	45	/* Module-relative offset, low 16 bits */
-+#define R_MIPS_TLS_GOTTPREL	46	/* 16 bit GOT offset for IE */
-+#define R_MIPS_TLS_TPREL32	47	/* TP-relative offset, 32 bit */
-+#define R_MIPS_TLS_TPREL64	48	/* TP-relative offset, 64 bit */
-+#define R_MIPS_TLS_TPREL_HI16	49	/* TP-relative offset, high 16 bits */
-+#define R_MIPS_TLS_TPREL_LO16	50	/* TP-relative offset, low 16 bits */
-+#define R_MIPS_GLOB_DAT		51
-+#define R_MIPS_COPY		126
-+#define R_MIPS_JUMP_SLOT        127
-+/* Keep this the last entry.  */
-+#define R_MIPS_NUM		128
-+
-+/* Legal values for p_type field of Elf32_Phdr.  */
-+
-+#define PT_MIPS_REGINFO	0x70000000	/* Register usage information */
-+#define PT_MIPS_RTPROC  0x70000001	/* Runtime procedure table. */
-+#define PT_MIPS_OPTIONS 0x70000002
-+
-+/* Special program header types.  */
-+
-+#define PF_MIPS_LOCAL	0x10000000
-+
-+/* Legal values for d_tag field of Elf32_Dyn.  */
-+
-+#define DT_MIPS_RLD_VERSION  0x70000001	/* Runtime linker interface version */
-+#define DT_MIPS_TIME_STAMP   0x70000002	/* Timestamp */
-+#define DT_MIPS_ICHECKSUM    0x70000003	/* Checksum */
-+#define DT_MIPS_IVERSION     0x70000004	/* Version string (string tbl index) */
-+#define DT_MIPS_FLAGS	     0x70000005	/* Flags */
-+#define DT_MIPS_BASE_ADDRESS 0x70000006	/* Base address */
-+#define DT_MIPS_MSYM	     0x70000007
-+#define DT_MIPS_CONFLICT     0x70000008	/* Address of CONFLICT section */
-+#define DT_MIPS_LIBLIST	     0x70000009	/* Address of LIBLIST section */
-+#define DT_MIPS_LOCAL_GOTNO  0x7000000a	/* Number of local GOT entries */
-+#define DT_MIPS_CONFLICTNO   0x7000000b	/* Number of CONFLICT entries */
-+#define DT_MIPS_LIBLISTNO    0x70000010	/* Number of LIBLIST entries */
-+#define DT_MIPS_SYMTABNO     0x70000011	/* Number of DYNSYM entries */
-+#define DT_MIPS_UNREFEXTNO   0x70000012	/* First external DYNSYM */
-+#define DT_MIPS_GOTSYM	     0x70000013	/* First GOT entry in DYNSYM */
-+#define DT_MIPS_HIPAGENO     0x70000014	/* Number of GOT page table entries */
-+#define DT_MIPS_RLD_MAP	     0x70000016	/* Address of run time loader map.  */
-+#define DT_MIPS_DELTA_CLASS  0x70000017	/* Delta C++ class definition.  */
-+#define DT_MIPS_DELTA_CLASS_NO    0x70000018 /* Number of entries in
-+						DT_MIPS_DELTA_CLASS.  */
-+#define DT_MIPS_DELTA_INSTANCE    0x70000019 /* Delta C++ class instances.  */
-+#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a /* Number of entries in
-+						DT_MIPS_DELTA_INSTANCE.  */
-+#define DT_MIPS_DELTA_RELOC  0x7000001b /* Delta relocations.  */
-+#define DT_MIPS_DELTA_RELOC_NO 0x7000001c /* Number of entries in
-+					     DT_MIPS_DELTA_RELOC.  */
-+#define DT_MIPS_DELTA_SYM    0x7000001d /* Delta symbols that Delta
-+					   relocations refer to.  */
-+#define DT_MIPS_DELTA_SYM_NO 0x7000001e /* Number of entries in
-+					   DT_MIPS_DELTA_SYM.  */
-+#define DT_MIPS_DELTA_CLASSSYM 0x70000020 /* Delta symbols that hold the
-+					     class declaration.  */
-+#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021 /* Number of entries in
-+						DT_MIPS_DELTA_CLASSSYM.  */
-+#define DT_MIPS_CXX_FLAGS    0x70000022 /* Flags indicating for C++ flavor.  */
-+#define DT_MIPS_PIXIE_INIT   0x70000023
-+#define DT_MIPS_SYMBOL_LIB   0x70000024
-+#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025
-+#define DT_MIPS_LOCAL_GOTIDX 0x70000026
-+#define DT_MIPS_HIDDEN_GOTIDX 0x70000027
-+#define DT_MIPS_PROTECTED_GOTIDX 0x70000028
-+#define DT_MIPS_OPTIONS	     0x70000029 /* Address of .options.  */
-+#define DT_MIPS_INTERFACE    0x7000002a /* Address of .interface.  */
-+#define DT_MIPS_DYNSTR_ALIGN 0x7000002b
-+#define DT_MIPS_INTERFACE_SIZE 0x7000002c /* Size of the .interface section. */
-+#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d /* Address of rld_text_rsolve
-+						    function stored in GOT.  */
-+#define DT_MIPS_PERF_SUFFIX  0x7000002e /* Default suffix of dso to be added
-+					   by rld on dlopen() calls.  */
-+#define DT_MIPS_COMPACT_SIZE 0x7000002f /* (O32)Size of compact rel section. */
-+#define DT_MIPS_GP_VALUE     0x70000030 /* GP value for aux GOTs.  */
-+#define DT_MIPS_AUX_DYNAMIC  0x70000031 /* Address of aux .dynamic.  */
-+/* The address of .got.plt in an executable using the new non-PIC ABI.  */
-+#define DT_MIPS_PLTGOT	     0x70000032
-+/* The base of the PLT in an executable using the new non-PIC ABI if that
-+   PLT is writable.  For a non-writable PLT, this is omitted or has a zero
-+   value.  */
-+#define DT_MIPS_RWPLT        0x70000034
-+#define DT_MIPS_NUM	     0x35
-+
-+/* Legal values for DT_MIPS_FLAGS Elf32_Dyn entry.  */
-+
-+#define RHF_NONE		   0		/* No flags */
-+#define RHF_QUICKSTART		   (1 << 0)	/* Use quickstart */
-+#define RHF_NOTPOT		   (1 << 1)	/* Hash size not power of 2 */
-+#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2)	/* Ignore LD_LIBRARY_PATH */
-+#define RHF_NO_MOVE		   (1 << 3)
-+#define RHF_SGI_ONLY		   (1 << 4)
-+#define RHF_GUARANTEE_INIT	   (1 << 5)
-+#define RHF_DELTA_C_PLUS_PLUS	   (1 << 6)
-+#define RHF_GUARANTEE_START_INIT   (1 << 7)
-+#define RHF_PIXIE		   (1 << 8)
-+#define RHF_DEFAULT_DELAY_LOAD	   (1 << 9)
-+#define RHF_REQUICKSTART	   (1 << 10)
-+#define RHF_REQUICKSTARTED	   (1 << 11)
-+#define RHF_CORD		   (1 << 12)
-+#define RHF_NO_UNRES_UNDEF	   (1 << 13)
-+#define RHF_RLD_ORDER_SAFE	   (1 << 14)
-+
-+/* Entries found in sections of type SHT_MIPS_LIBLIST.  */
-+
-+typedef struct
-+{
-+  Elf32_Word l_name;		/* Name (string table index) */
-+  Elf32_Word l_time_stamp;	/* Timestamp */
-+  Elf32_Word l_checksum;	/* Checksum */
-+  Elf32_Word l_version;		/* Interface version */
-+  Elf32_Word l_flags;		/* Flags */
-+} Elf32_Lib;
-+
-+typedef struct
-+{
-+  Elf64_Word l_name;		/* Name (string table index) */
-+  Elf64_Word l_time_stamp;	/* Timestamp */
-+  Elf64_Word l_checksum;	/* Checksum */
-+  Elf64_Word l_version;		/* Interface version */
-+  Elf64_Word l_flags;		/* Flags */
-+} Elf64_Lib;
-+
-+
-+/* Legal values for l_flags.  */
-+
-+#define LL_NONE		  0
-+#define LL_EXACT_MATCH	  (1 << 0)	/* Require exact match */
-+#define LL_IGNORE_INT_VER (1 << 1)	/* Ignore interface version */
-+#define LL_REQUIRE_MINOR  (1 << 2)
-+#define LL_EXPORTS	  (1 << 3)
-+#define LL_DELAY_LOAD	  (1 << 4)
-+#define LL_DELTA	  (1 << 5)
-+
-+/* Entries found in sections of type SHT_MIPS_CONFLICT.  */
-+
-+typedef Elf32_Addr Elf32_Conflict;
-+
-+
-+/* HPPA specific definitions.  */
-+
-+/* Legal values for e_flags field of Elf32_Ehdr.  */
-+
-+#define EF_PARISC_TRAPNIL	0x00010000 /* Trap nil pointer dereference.  */
-+#define EF_PARISC_EXT		0x00020000 /* Program uses arch. extensions. */
-+#define EF_PARISC_LSB		0x00040000 /* Program expects little endian. */
-+#define EF_PARISC_WIDE		0x00080000 /* Program expects wide mode.  */
-+#define EF_PARISC_NO_KABP	0x00100000 /* No kernel assisted branch
-+					      prediction.  */
-+#define EF_PARISC_LAZYSWAP	0x00400000 /* Allow lazy swapping.  */
-+#define EF_PARISC_ARCH		0x0000ffff /* Architecture version.  */
-+
-+/* Defined values for `e_flags & EF_PARISC_ARCH' are:  */
-+
-+#define EFA_PARISC_1_0		    0x020b /* PA-RISC 1.0 big-endian.  */
-+#define EFA_PARISC_1_1		    0x0210 /* PA-RISC 1.1 big-endian.  */
-+#define EFA_PARISC_2_0		    0x0214 /* PA-RISC 2.0 big-endian.  */
-+
-+/* Additional section indeces.  */
-+
-+#define SHN_PARISC_ANSI_COMMON	0xff00	   /* Section for tenatively declared
-+					      symbols in ANSI C.  */
-+#define SHN_PARISC_HUGE_COMMON	0xff01	   /* Common blocks in huge model.  */
-+
-+/* Legal values for sh_type field of Elf32_Shdr.  */
-+
-+#define SHT_PARISC_EXT		0x70000000 /* Contains product specific ext. */
-+#define SHT_PARISC_UNWIND	0x70000001 /* Unwind information.  */
-+#define SHT_PARISC_DOC		0x70000002 /* Debug info for optimized code. */
-+
-+/* Legal values for sh_flags field of Elf32_Shdr.  */
-+
-+#define SHF_PARISC_SHORT	0x20000000 /* Section with short addressing. */
-+#define SHF_PARISC_HUGE		0x40000000 /* Section far from gp.  */
-+#define SHF_PARISC_SBP		0x80000000 /* Static branch prediction code. */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
-+
-+#define STT_PARISC_MILLICODE	13	/* Millicode function entry point.  */
-+
-+#define STT_HP_OPAQUE		(STT_LOOS + 0x1)
-+#define STT_HP_STUB		(STT_LOOS + 0x2)
-+
-+/* HPPA relocs.  */
-+
-+#define R_PARISC_NONE		0	/* No reloc.  */
-+#define R_PARISC_DIR32		1	/* Direct 32-bit reference.  */
-+#define R_PARISC_DIR21L		2	/* Left 21 bits of eff. address.  */
-+#define R_PARISC_DIR17R		3	/* Right 17 bits of eff. address.  */
-+#define R_PARISC_DIR17F		4	/* 17 bits of eff. address.  */
-+#define R_PARISC_DIR14R		6	/* Right 14 bits of eff. address.  */
-+#define R_PARISC_PCREL32	9	/* 32-bit rel. address.  */
-+#define R_PARISC_PCREL21L	10	/* Left 21 bits of rel. address.  */
-+#define R_PARISC_PCREL17R	11	/* Right 17 bits of rel. address.  */
-+#define R_PARISC_PCREL17F	12	/* 17 bits of rel. address.  */
-+#define R_PARISC_PCREL14R	14	/* Right 14 bits of rel. address.  */
-+#define R_PARISC_DPREL21L	18	/* Left 21 bits of rel. address.  */
-+#define R_PARISC_DPREL14R	22	/* Right 14 bits of rel. address.  */
-+#define R_PARISC_GPREL21L	26	/* GP-relative, left 21 bits.  */
-+#define R_PARISC_GPREL14R	30	/* GP-relative, right 14 bits.  */
-+#define R_PARISC_LTOFF21L	34	/* LT-relative, left 21 bits.  */
-+#define R_PARISC_LTOFF14R	38	/* LT-relative, right 14 bits.  */
-+#define R_PARISC_SECREL32	41	/* 32 bits section rel. address.  */
-+#define R_PARISC_SEGBASE	48	/* No relocation, set segment base.  */
-+#define R_PARISC_SEGREL32	49	/* 32 bits segment rel. address.  */
-+#define R_PARISC_PLTOFF21L	50	/* PLT rel. address, left 21 bits.  */
-+#define R_PARISC_PLTOFF14R	54	/* PLT rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF_FPTR32	57	/* 32 bits LT-rel. function pointer. */
-+#define R_PARISC_LTOFF_FPTR21L	58	/* LT-rel. fct ptr, left 21 bits. */
-+#define R_PARISC_LTOFF_FPTR14R	62	/* LT-rel. fct ptr, right 14 bits. */
-+#define R_PARISC_FPTR64		64	/* 64 bits function address.  */
-+#define R_PARISC_PLABEL32	65	/* 32 bits function address.  */
-+#define R_PARISC_PLABEL21L	66	/* Left 21 bits of fdesc address.  */
-+#define R_PARISC_PLABEL14R	70	/* Right 14 bits of fdesc address.  */
-+#define R_PARISC_PCREL64	72	/* 64 bits PC-rel. address.  */
-+#define R_PARISC_PCREL22F	74	/* 22 bits PC-rel. address.  */
-+#define R_PARISC_PCREL14WR	75	/* PC-rel. address, right 14 bits.  */
-+#define R_PARISC_PCREL14DR	76	/* PC rel. address, right 14 bits.  */
-+#define R_PARISC_PCREL16F	77	/* 16 bits PC-rel. address.  */
-+#define R_PARISC_PCREL16WF	78	/* 16 bits PC-rel. address.  */
-+#define R_PARISC_PCREL16DF	79	/* 16 bits PC-rel. address.  */
-+#define R_PARISC_DIR64		80	/* 64 bits of eff. address.  */
-+#define R_PARISC_DIR14WR	83	/* 14 bits of eff. address.  */
-+#define R_PARISC_DIR14DR	84	/* 14 bits of eff. address.  */
-+#define R_PARISC_DIR16F		85	/* 16 bits of eff. address.  */
-+#define R_PARISC_DIR16WF	86	/* 16 bits of eff. address.  */
-+#define R_PARISC_DIR16DF	87	/* 16 bits of eff. address.  */
-+#define R_PARISC_GPREL64	88	/* 64 bits of GP-rel. address.  */
-+#define R_PARISC_GPREL14WR	91	/* GP-rel. address, right 14 bits.  */
-+#define R_PARISC_GPREL14DR	92	/* GP-rel. address, right 14 bits.  */
-+#define R_PARISC_GPREL16F	93	/* 16 bits GP-rel. address.  */
-+#define R_PARISC_GPREL16WF	94	/* 16 bits GP-rel. address.  */
-+#define R_PARISC_GPREL16DF	95	/* 16 bits GP-rel. address.  */
-+#define R_PARISC_LTOFF64	96	/* 64 bits LT-rel. address.  */
-+#define R_PARISC_LTOFF14WR	99	/* LT-rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF14DR	100	/* LT-rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF16F	101	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_LTOFF16WF	102	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_LTOFF16DF	103	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_SECREL64	104	/* 64 bits section rel. address.  */
-+#define R_PARISC_SEGREL64	112	/* 64 bits segment rel. address.  */
-+#define R_PARISC_PLTOFF14WR	115	/* PLT-rel. address, right 14 bits.  */
-+#define R_PARISC_PLTOFF14DR	116	/* PLT-rel. address, right 14 bits.  */
-+#define R_PARISC_PLTOFF16F	117	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_PLTOFF16WF	118	/* 16 bits PLT-rel. address.  */
-+#define R_PARISC_PLTOFF16DF	119	/* 16 bits PLT-rel. address.  */
-+#define R_PARISC_LTOFF_FPTR64	120	/* 64 bits LT-rel. function ptr.  */
-+#define R_PARISC_LTOFF_FPTR14WR	123	/* LT-rel. fct. ptr., right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR14DR	124	/* LT-rel. fct. ptr., right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR16F	125	/* 16 bits LT-rel. function ptr.  */
-+#define R_PARISC_LTOFF_FPTR16WF	126	/* 16 bits LT-rel. function ptr.  */
-+#define R_PARISC_LTOFF_FPTR16DF	127	/* 16 bits LT-rel. function ptr.  */
-+#define R_PARISC_LORESERVE	128
-+#define R_PARISC_COPY		128	/* Copy relocation.  */
-+#define R_PARISC_IPLT		129	/* Dynamic reloc, imported PLT */
-+#define R_PARISC_EPLT		130	/* Dynamic reloc, exported PLT */
-+#define R_PARISC_TPREL32	153	/* 32 bits TP-rel. address.  */
-+#define R_PARISC_TPREL21L	154	/* TP-rel. address, left 21 bits.  */
-+#define R_PARISC_TPREL14R	158	/* TP-rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF_TP21L	162	/* LT-TP-rel. address, left 21 bits. */
-+#define R_PARISC_LTOFF_TP14R	166	/* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP14F	167	/* 14 bits LT-TP-rel. address.  */
-+#define R_PARISC_TPREL64	216	/* 64 bits TP-rel. address.  */
-+#define R_PARISC_TPREL14WR	219	/* TP-rel. address, right 14 bits.  */
-+#define R_PARISC_TPREL14DR	220	/* TP-rel. address, right 14 bits.  */
-+#define R_PARISC_TPREL16F	221	/* 16 bits TP-rel. address.  */
-+#define R_PARISC_TPREL16WF	222	/* 16 bits TP-rel. address.  */
-+#define R_PARISC_TPREL16DF	223	/* 16 bits TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP64	224	/* 64 bits LT-TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP14WR	227	/* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP14DR	228	/* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP16F	229	/* 16 bits LT-TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP16WF	230	/* 16 bits LT-TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP16DF	231	/* 16 bits LT-TP-rel. address.  */
-+#define R_PARISC_GNU_VTENTRY	232
-+#define R_PARISC_GNU_VTINHERIT	233
-+#define R_PARISC_TLS_GD21L	234	/* GD 21-bit left.  */
-+#define R_PARISC_TLS_GD14R	235	/* GD 14-bit right.  */
-+#define R_PARISC_TLS_GDCALL	236	/* GD call to __t_g_a.  */
-+#define R_PARISC_TLS_LDM21L	237	/* LD module 21-bit left.  */
-+#define R_PARISC_TLS_LDM14R	238	/* LD module 14-bit right.  */
-+#define R_PARISC_TLS_LDMCALL	239	/* LD module call to __t_g_a.  */
-+#define R_PARISC_TLS_LDO21L	240	/* LD offset 21-bit left.  */
-+#define R_PARISC_TLS_LDO14R	241	/* LD offset 14-bit right.  */
-+#define R_PARISC_TLS_DTPMOD32	242	/* DTP module 32-bit.  */
-+#define R_PARISC_TLS_DTPMOD64	243	/* DTP module 64-bit.  */
-+#define R_PARISC_TLS_DTPOFF32	244	/* DTP offset 32-bit.  */
-+#define R_PARISC_TLS_DTPOFF64	245	/* DTP offset 32-bit.  */
-+#define R_PARISC_TLS_LE21L	R_PARISC_TPREL21L
-+#define R_PARISC_TLS_LE14R	R_PARISC_TPREL14R
-+#define R_PARISC_TLS_IE21L	R_PARISC_LTOFF_TP21L
-+#define R_PARISC_TLS_IE14R	R_PARISC_LTOFF_TP14R
-+#define R_PARISC_TLS_TPREL32	R_PARISC_TPREL32
-+#define R_PARISC_TLS_TPREL64	R_PARISC_TPREL64
-+#define R_PARISC_HIRESERVE	255
-+
-+/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr.  */
-+
-+#define PT_HP_TLS		(PT_LOOS + 0x0)
-+#define PT_HP_CORE_NONE		(PT_LOOS + 0x1)
-+#define PT_HP_CORE_VERSION	(PT_LOOS + 0x2)
-+#define PT_HP_CORE_KERNEL	(PT_LOOS + 0x3)
-+#define PT_HP_CORE_COMM		(PT_LOOS + 0x4)
-+#define PT_HP_CORE_PROC		(PT_LOOS + 0x5)
-+#define PT_HP_CORE_LOADABLE	(PT_LOOS + 0x6)
-+#define PT_HP_CORE_STACK	(PT_LOOS + 0x7)
-+#define PT_HP_CORE_SHM		(PT_LOOS + 0x8)
-+#define PT_HP_CORE_MMF		(PT_LOOS + 0x9)
-+#define PT_HP_PARALLEL		(PT_LOOS + 0x10)
-+#define PT_HP_FASTBIND		(PT_LOOS + 0x11)
-+#define PT_HP_OPT_ANNOT		(PT_LOOS + 0x12)
-+#define PT_HP_HSL_ANNOT		(PT_LOOS + 0x13)
-+#define PT_HP_STACK		(PT_LOOS + 0x14)
-+
-+#define PT_PARISC_ARCHEXT	0x70000000
-+#define PT_PARISC_UNWIND	0x70000001
-+
-+/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr.  */
-+
-+#define PF_PARISC_SBP		0x08000000
-+
-+#define PF_HP_PAGE_SIZE		0x00100000
-+#define PF_HP_FAR_SHARED	0x00200000
-+#define PF_HP_NEAR_SHARED	0x00400000
-+#define PF_HP_CODE		0x01000000
-+#define PF_HP_MODIFY		0x02000000
-+#define PF_HP_LAZYSWAP		0x04000000
-+#define PF_HP_SBP		0x08000000
-+
-+
-+/* Alpha specific definitions.  */
-+
-+/* Legal values for e_flags field of Elf64_Ehdr.  */
-+
-+#define EF_ALPHA_32BIT		1	/* All addresses must be < 2GB.  */
-+#define EF_ALPHA_CANRELAX	2	/* Relocations for relaxing exist.  */
-+
-+/* Legal values for sh_type field of Elf64_Shdr.  */
-+
-+/* These two are primerily concerned with ECOFF debugging info.  */
-+#define SHT_ALPHA_DEBUG		0x70000001
-+#define SHT_ALPHA_REGINFO	0x70000002
-+
-+/* Legal values for sh_flags field of Elf64_Shdr.  */
-+
-+#define SHF_ALPHA_GPREL		0x10000000
-+
-+/* Legal values for st_other field of Elf64_Sym.  */
-+#define STO_ALPHA_NOPV		0x80	/* No PV required.  */
-+#define STO_ALPHA_STD_GPLOAD	0x88	/* PV only used for initial ldgp.  */
-+
-+/* Alpha relocs.  */
-+
-+#define R_ALPHA_NONE		0	/* No reloc */
-+#define R_ALPHA_REFLONG		1	/* Direct 32 bit */
-+#define R_ALPHA_REFQUAD		2	/* Direct 64 bit */
-+#define R_ALPHA_GPREL32		3	/* GP relative 32 bit */
-+#define R_ALPHA_LITERAL		4	/* GP relative 16 bit w/optimization */
-+#define R_ALPHA_LITUSE		5	/* Optimization hint for LITERAL */
-+#define R_ALPHA_GPDISP		6	/* Add displacement to GP */
-+#define R_ALPHA_BRADDR		7	/* PC+4 relative 23 bit shifted */
-+#define R_ALPHA_HINT		8	/* PC+4 relative 16 bit shifted */
-+#define R_ALPHA_SREL16		9	/* PC relative 16 bit */
-+#define R_ALPHA_SREL32		10	/* PC relative 32 bit */
-+#define R_ALPHA_SREL64		11	/* PC relative 64 bit */
-+#define R_ALPHA_GPRELHIGH	17	/* GP relative 32 bit, high 16 bits */
-+#define R_ALPHA_GPRELLOW	18	/* GP relative 32 bit, low 16 bits */
-+#define R_ALPHA_GPREL16		19	/* GP relative 16 bit */
-+#define R_ALPHA_COPY		24	/* Copy symbol at runtime */
-+#define R_ALPHA_GLOB_DAT	25	/* Create GOT entry */
-+#define R_ALPHA_JMP_SLOT	26	/* Create PLT entry */
-+#define R_ALPHA_RELATIVE	27	/* Adjust by program base */
-+#define R_ALPHA_TLS_GD_HI	28
-+#define R_ALPHA_TLSGD		29
-+#define R_ALPHA_TLS_LDM		30
-+#define R_ALPHA_DTPMOD64	31
-+#define R_ALPHA_GOTDTPREL	32
-+#define R_ALPHA_DTPREL64	33
-+#define R_ALPHA_DTPRELHI	34
-+#define R_ALPHA_DTPRELLO	35
-+#define R_ALPHA_DTPREL16	36
-+#define R_ALPHA_GOTTPREL	37
-+#define R_ALPHA_TPREL64		38
-+#define R_ALPHA_TPRELHI		39
-+#define R_ALPHA_TPRELLO		40
-+#define R_ALPHA_TPREL16		41
-+/* Keep this the last entry.  */
-+#define R_ALPHA_NUM		46
-+
-+/* Magic values of the LITUSE relocation addend.  */
-+#define LITUSE_ALPHA_ADDR	0
-+#define LITUSE_ALPHA_BASE	1
-+#define LITUSE_ALPHA_BYTOFF	2
-+#define LITUSE_ALPHA_JSR	3
-+#define LITUSE_ALPHA_TLS_GD	4
-+#define LITUSE_ALPHA_TLS_LDM	5
-+
-+/* Legal values for d_tag of Elf64_Dyn.  */
-+#define DT_ALPHA_PLTRO		(DT_LOPROC + 0)
-+#define DT_ALPHA_NUM		1
-+
-+/* PowerPC specific declarations */
-+
-+/* Values for Elf32/64_Ehdr.e_flags.  */
-+#define EF_PPC_EMB		0x80000000	/* PowerPC embedded flag */
-+
-+/* Cygnus local bits below */
-+#define EF_PPC_RELOCATABLE	0x00010000	/* PowerPC -mrelocatable flag*/
-+#define EF_PPC_RELOCATABLE_LIB	0x00008000	/* PowerPC -mrelocatable-lib
-+						   flag */
-+
-+/* PowerPC relocations defined by the ABIs */
-+#define R_PPC_NONE		0
-+#define R_PPC_ADDR32		1	/* 32bit absolute address */
-+#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
-+#define R_PPC_ADDR16		3	/* 16bit absolute address */
-+#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
-+#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
-+#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
-+#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
-+#define R_PPC_ADDR14_BRTAKEN	8
-+#define R_PPC_ADDR14_BRNTAKEN	9
-+#define R_PPC_REL24		10	/* PC relative 26 bit */
-+#define R_PPC_REL14		11	/* PC relative 16 bit */
-+#define R_PPC_REL14_BRTAKEN	12
-+#define R_PPC_REL14_BRNTAKEN	13
-+#define R_PPC_GOT16		14
-+#define R_PPC_GOT16_LO		15
-+#define R_PPC_GOT16_HI		16
-+#define R_PPC_GOT16_HA		17
-+#define R_PPC_PLTREL24		18
-+#define R_PPC_COPY		19
-+#define R_PPC_GLOB_DAT		20
-+#define R_PPC_JMP_SLOT		21
-+#define R_PPC_RELATIVE		22
-+#define R_PPC_LOCAL24PC		23
-+#define R_PPC_UADDR32		24
-+#define R_PPC_UADDR16		25
-+#define R_PPC_REL32		26
-+#define R_PPC_PLT32		27
-+#define R_PPC_PLTREL32		28
-+#define R_PPC_PLT16_LO		29
-+#define R_PPC_PLT16_HI		30
-+#define R_PPC_PLT16_HA		31
-+#define R_PPC_SDAREL16		32
-+#define R_PPC_SECTOFF		33
-+#define R_PPC_SECTOFF_LO	34
-+#define R_PPC_SECTOFF_HI	35
-+#define R_PPC_SECTOFF_HA	36
-+
-+/* PowerPC relocations defined for the TLS access ABI.  */
-+#define R_PPC_TLS		67 /* none	(sym+add)@tls */
-+#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
-+#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
-+#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-+#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-+#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-+#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
-+#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
-+#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-+#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-+#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-+#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
-+#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-+#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-+#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-+#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-+#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-+#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-+#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-+#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-+#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
-+#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
-+#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-+#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-+#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
-+#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
-+#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
-+#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
-+
-+/* The remaining relocs are from the Embedded ELF ABI, and are not
-+   in the SVR4 ELF ABI.  */
-+#define R_PPC_EMB_NADDR32	101
-+#define R_PPC_EMB_NADDR16	102
-+#define R_PPC_EMB_NADDR16_LO	103
-+#define R_PPC_EMB_NADDR16_HI	104
-+#define R_PPC_EMB_NADDR16_HA	105
-+#define R_PPC_EMB_SDAI16	106
-+#define R_PPC_EMB_SDA2I16	107
-+#define R_PPC_EMB_SDA2REL	108
-+#define R_PPC_EMB_SDA21		109	/* 16 bit offset in SDA */
-+#define R_PPC_EMB_MRKREF	110
-+#define R_PPC_EMB_RELSEC16	111
-+#define R_PPC_EMB_RELST_LO	112
-+#define R_PPC_EMB_RELST_HI	113
-+#define R_PPC_EMB_RELST_HA	114
-+#define R_PPC_EMB_BIT_FLD	115
-+#define R_PPC_EMB_RELSDA	116	/* 16 bit relative offset in SDA */
-+
-+/* Diab tool relocations.  */
-+#define R_PPC_DIAB_SDA21_LO	180	/* like EMB_SDA21, but lower 16 bit */
-+#define R_PPC_DIAB_SDA21_HI	181	/* like EMB_SDA21, but high 16 bit */
-+#define R_PPC_DIAB_SDA21_HA	182	/* like EMB_SDA21, adjusted high 16 */
-+#define R_PPC_DIAB_RELSDA_LO	183	/* like EMB_RELSDA, but lower 16 bit */
-+#define R_PPC_DIAB_RELSDA_HI	184	/* like EMB_RELSDA, but high 16 bit */
-+#define R_PPC_DIAB_RELSDA_HA	185	/* like EMB_RELSDA, adjusted high 16 */
-+
-+/* GNU extension to support local ifunc.  */
-+#define R_PPC_IRELATIVE		248
-+
-+/* GNU relocs used in PIC code sequences.  */
-+#define R_PPC_REL16		249	/* half16   (sym+add-.) */
-+#define R_PPC_REL16_LO		250	/* half16   (sym+add-.)@l */
-+#define R_PPC_REL16_HI		251	/* half16   (sym+add-.)@h */
-+#define R_PPC_REL16_HA		252	/* half16   (sym+add-.)@ha */
-+
-+/* This is a phony reloc to handle any old fashioned TOC16 references
-+   that may still be in object files.  */
-+#define R_PPC_TOC16		255
-+
-+/* PowerPC specific values for the Dyn d_tag field.  */
-+#define DT_PPC_GOT		(DT_LOPROC + 0)
-+#define DT_PPC_NUM		1
-+
-+/* PowerPC64 relocations defined by the ABIs */
-+#define R_PPC64_NONE		R_PPC_NONE
-+#define R_PPC64_ADDR32		R_PPC_ADDR32 /* 32bit absolute address */
-+#define R_PPC64_ADDR24		R_PPC_ADDR24 /* 26bit address, word aligned */
-+#define R_PPC64_ADDR16		R_PPC_ADDR16 /* 16bit absolute address */
-+#define R_PPC64_ADDR16_LO	R_PPC_ADDR16_LO	/* lower 16bits of address */
-+#define R_PPC64_ADDR16_HI	R_PPC_ADDR16_HI	/* high 16bits of address. */
-+#define R_PPC64_ADDR16_HA	R_PPC_ADDR16_HA /* adjusted high 16bits.  */
-+#define R_PPC64_ADDR14		R_PPC_ADDR14 /* 16bit address, word aligned */
-+#define R_PPC64_ADDR14_BRTAKEN	R_PPC_ADDR14_BRTAKEN
-+#define R_PPC64_ADDR14_BRNTAKEN	R_PPC_ADDR14_BRNTAKEN
-+#define R_PPC64_REL24		R_PPC_REL24 /* PC-rel. 26 bit, word aligned */
-+#define R_PPC64_REL14		R_PPC_REL14 /* PC relative 16 bit */
-+#define R_PPC64_REL14_BRTAKEN	R_PPC_REL14_BRTAKEN
-+#define R_PPC64_REL14_BRNTAKEN	R_PPC_REL14_BRNTAKEN
-+#define R_PPC64_GOT16		R_PPC_GOT16
-+#define R_PPC64_GOT16_LO	R_PPC_GOT16_LO
-+#define R_PPC64_GOT16_HI	R_PPC_GOT16_HI
-+#define R_PPC64_GOT16_HA	R_PPC_GOT16_HA
-+
-+#define R_PPC64_COPY		R_PPC_COPY
-+#define R_PPC64_GLOB_DAT	R_PPC_GLOB_DAT
-+#define R_PPC64_JMP_SLOT	R_PPC_JMP_SLOT
-+#define R_PPC64_RELATIVE	R_PPC_RELATIVE
-+
-+#define R_PPC64_UADDR32		R_PPC_UADDR32
-+#define R_PPC64_UADDR16		R_PPC_UADDR16
-+#define R_PPC64_REL32		R_PPC_REL32
-+#define R_PPC64_PLT32		R_PPC_PLT32
-+#define R_PPC64_PLTREL32	R_PPC_PLTREL32
-+#define R_PPC64_PLT16_LO	R_PPC_PLT16_LO
-+#define R_PPC64_PLT16_HI	R_PPC_PLT16_HI
-+#define R_PPC64_PLT16_HA	R_PPC_PLT16_HA
-+
-+#define R_PPC64_SECTOFF		R_PPC_SECTOFF
-+#define R_PPC64_SECTOFF_LO	R_PPC_SECTOFF_LO
-+#define R_PPC64_SECTOFF_HI	R_PPC_SECTOFF_HI
-+#define R_PPC64_SECTOFF_HA	R_PPC_SECTOFF_HA
-+#define R_PPC64_ADDR30		37 /* word30 (S + A - P) >> 2 */
-+#define R_PPC64_ADDR64		38 /* doubleword64 S + A */
-+#define R_PPC64_ADDR16_HIGHER	39 /* half16 #higher(S + A) */
-+#define R_PPC64_ADDR16_HIGHERA	40 /* half16 #highera(S + A) */
-+#define R_PPC64_ADDR16_HIGHEST	41 /* half16 #highest(S + A) */
-+#define R_PPC64_ADDR16_HIGHESTA	42 /* half16 #highesta(S + A) */
-+#define R_PPC64_UADDR64		43 /* doubleword64 S + A */
-+#define R_PPC64_REL64		44 /* doubleword64 S + A - P */
-+#define R_PPC64_PLT64		45 /* doubleword64 L + A */
-+#define R_PPC64_PLTREL64	46 /* doubleword64 L + A - P */
-+#define R_PPC64_TOC16		47 /* half16* S + A - .TOC */
-+#define R_PPC64_TOC16_LO	48 /* half16 #lo(S + A - .TOC.) */
-+#define R_PPC64_TOC16_HI	49 /* half16 #hi(S + A - .TOC.) */
-+#define R_PPC64_TOC16_HA	50 /* half16 #ha(S + A - .TOC.) */
-+#define R_PPC64_TOC		51 /* doubleword64 .TOC */
-+#define R_PPC64_PLTGOT16	52 /* half16* M + A */
-+#define R_PPC64_PLTGOT16_LO	53 /* half16 #lo(M + A) */
-+#define R_PPC64_PLTGOT16_HI	54 /* half16 #hi(M + A) */
-+#define R_PPC64_PLTGOT16_HA	55 /* half16 #ha(M + A) */
-+
-+#define R_PPC64_ADDR16_DS	56 /* half16ds* (S + A) >> 2 */
-+#define R_PPC64_ADDR16_LO_DS	57 /* half16ds  #lo(S + A) >> 2 */
-+#define R_PPC64_GOT16_DS	58 /* half16ds* (G + A) >> 2 */
-+#define R_PPC64_GOT16_LO_DS	59 /* half16ds  #lo(G + A) >> 2 */
-+#define R_PPC64_PLT16_LO_DS	60 /* half16ds  #lo(L + A) >> 2 */
-+#define R_PPC64_SECTOFF_DS	61 /* half16ds* (R + A) >> 2 */
-+#define R_PPC64_SECTOFF_LO_DS	62 /* half16ds  #lo(R + A) >> 2 */
-+#define R_PPC64_TOC16_DS	63 /* half16ds* (S + A - .TOC.) >> 2 */
-+#define R_PPC64_TOC16_LO_DS	64 /* half16ds  #lo(S + A - .TOC.) >> 2 */
-+#define R_PPC64_PLTGOT16_DS	65 /* half16ds* (M + A) >> 2 */
-+#define R_PPC64_PLTGOT16_LO_DS	66 /* half16ds  #lo(M + A) >> 2 */
-+
-+/* PowerPC64 relocations defined for the TLS access ABI.  */
-+#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
-+#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
-+#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
-+#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-+#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-+#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-+#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
-+#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
-+#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-+#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-+#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-+#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
-+#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-+#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-+#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-+#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-+#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-+#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-+#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-+#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-+#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
-+#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
-+#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-+#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-+#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
-+#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
-+#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
-+#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
-+#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
-+#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
-+#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
-+#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
-+#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
-+#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
-+#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
-+#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
-+#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
-+#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
-+#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
-+#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
-+
-+/* GNU extension to support local ifunc.  */
-+#define R_PPC64_JMP_IREL	247
-+#define R_PPC64_IRELATIVE	248
-+#define R_PPC64_REL16		249	/* half16   (sym+add-.) */
-+#define R_PPC64_REL16_LO	250	/* half16   (sym+add-.)@l */
-+#define R_PPC64_REL16_HI	251	/* half16   (sym+add-.)@h */
-+#define R_PPC64_REL16_HA	252	/* half16   (sym+add-.)@ha */
-+
-+/* PowerPC64 specific values for the Dyn d_tag field.  */
-+#define DT_PPC64_GLINK  (DT_LOPROC + 0)
-+#define DT_PPC64_OPD	(DT_LOPROC + 1)
-+#define DT_PPC64_OPDSZ	(DT_LOPROC + 2)
-+#define DT_PPC64_NUM    3
-+
-+
-+/* ARM specific declarations */
-+
-+/* Processor specific flags for the ELF header e_flags field.  */
-+#define EF_ARM_RELEXEC		0x01
-+#define EF_ARM_HASENTRY		0x02
-+#define EF_ARM_INTERWORK	0x04
-+#define EF_ARM_APCS_26		0x08
-+#define EF_ARM_APCS_FLOAT	0x10
-+#define EF_ARM_PIC		0x20
-+#define EF_ARM_ALIGN8		0x40 /* 8-bit structure alignment is in use */
-+#define EF_ARM_NEW_ABI		0x80
-+#define EF_ARM_OLD_ABI		0x100
-+#define EF_ARM_SOFT_FLOAT	0x200
-+#define EF_ARM_VFP_FLOAT	0x400
-+#define EF_ARM_MAVERICK_FLOAT	0x800
-+
-+
-+/* Other constants defined in the ARM ELF spec. version B-01.  */
-+/* NB. These conflict with values defined above.  */
-+#define EF_ARM_SYMSARESORTED	0x04
-+#define EF_ARM_DYNSYMSUSESEGIDX	0x08
-+#define EF_ARM_MAPSYMSFIRST	0x10
-+#define EF_ARM_EABIMASK		0XFF000000
-+
-+/* Constants defined in AAELF.  */
-+#define EF_ARM_BE8	    0x00800000
-+#define EF_ARM_LE8	    0x00400000
-+
-+#define EF_ARM_EABI_VERSION(flags)	((flags) & EF_ARM_EABIMASK)
-+#define EF_ARM_EABI_UNKNOWN	0x00000000
-+#define EF_ARM_EABI_VER1	0x01000000
-+#define EF_ARM_EABI_VER2	0x02000000
-+#define EF_ARM_EABI_VER3	0x03000000
-+#define EF_ARM_EABI_VER4	0x04000000
-+#define EF_ARM_EABI_VER5	0x05000000
-+
-+/* Additional symbol types for Thumb.  */
-+#define STT_ARM_TFUNC		STT_LOPROC /* A Thumb function.  */
-+#define STT_ARM_16BIT		STT_HIPROC /* A Thumb label.  */
-+
-+/* ARM-specific values for sh_flags */
-+#define SHF_ARM_ENTRYSECT	0x10000000 /* Section contains an entry point */
-+#define SHF_ARM_COMDEF		0x80000000 /* Section may be multiply defined
-+					      in the input to a link step.  */
-+
-+/* ARM-specific program header flags */
-+#define PF_ARM_SB		0x10000000 /* Segment contains the location
-+					      addressed by the static base. */
-+#define PF_ARM_PI		0x20000000 /* Position-independent segment.  */
-+#define PF_ARM_ABS		0x40000000 /* Absolute segment.  */
-+
-+/* Processor specific values for the Phdr p_type field.  */
-+#define PT_ARM_EXIDX		(PT_LOPROC + 1)	/* ARM unwind segment.  */
-+
-+/* Processor specific values for the Shdr sh_type field.  */
-+#define SHT_ARM_EXIDX		(SHT_LOPROC + 1) /* ARM unwind section.  */
-+#define SHT_ARM_PREEMPTMAP	(SHT_LOPROC + 2) /* Preemption details.  */
-+#define SHT_ARM_ATTRIBUTES	(SHT_LOPROC + 3) /* ARM attributes section.  */
-+
-+
-+/* ARM relocs.  */
-+
-+#define R_ARM_NONE		0	/* No reloc */
-+#define R_ARM_PC24		1	/* PC relative 26 bit branch */
-+#define R_ARM_ABS32		2	/* Direct 32 bit  */
-+#define R_ARM_REL32		3	/* PC relative 32 bit */
-+#define R_ARM_PC13		4
-+#define R_ARM_ABS16		5	/* Direct 16 bit */
-+#define R_ARM_ABS12		6	/* Direct 12 bit */
-+#define R_ARM_THM_ABS5		7
-+#define R_ARM_ABS8		8	/* Direct 8 bit */
-+#define R_ARM_SBREL32		9
-+#define R_ARM_THM_PC22		10
-+#define R_ARM_THM_PC8		11
-+#define R_ARM_AMP_VCALL9	12
-+#define R_ARM_SWI24		13	/* Obsolete static relocation.  */
-+#define R_ARM_TLS_DESC		13      /* Dynamic relocation.  */
-+#define R_ARM_THM_SWI8		14
-+#define R_ARM_XPC25		15
-+#define R_ARM_THM_XPC22		16
-+#define R_ARM_TLS_DTPMOD32	17	/* ID of module containing symbol */
-+#define R_ARM_TLS_DTPOFF32	18	/* Offset in TLS block */
-+#define R_ARM_TLS_TPOFF32	19	/* Offset in static TLS block */
-+#define R_ARM_COPY		20	/* Copy symbol at runtime */
-+#define R_ARM_GLOB_DAT		21	/* Create GOT entry */
-+#define R_ARM_JUMP_SLOT		22	/* Create PLT entry */
-+#define R_ARM_RELATIVE		23	/* Adjust by program base */
-+#define R_ARM_GOTOFF		24	/* 32 bit offset to GOT */
-+#define R_ARM_GOTPC		25	/* 32 bit PC relative offset to GOT */
-+#define R_ARM_GOT32		26	/* 32 bit GOT entry */
-+#define R_ARM_PLT32		27	/* 32 bit PLT address */
-+#define R_ARM_ALU_PCREL_7_0	32
-+#define R_ARM_ALU_PCREL_15_8	33
-+#define R_ARM_ALU_PCREL_23_15	34
-+#define R_ARM_LDR_SBREL_11_0	35
-+#define R_ARM_ALU_SBREL_19_12	36
-+#define R_ARM_ALU_SBREL_27_20	37
-+#define R_ARM_TLS_GOTDESC	90
-+#define R_ARM_TLS_CALL		91
-+#define R_ARM_TLS_DESCSEQ	92
-+#define R_ARM_THM_TLS_CALL	93
-+#define R_ARM_GNU_VTENTRY	100
-+#define R_ARM_GNU_VTINHERIT	101
-+#define R_ARM_THM_PC11		102	/* thumb unconditional branch */
-+#define R_ARM_THM_PC9		103	/* thumb conditional branch */
-+#define R_ARM_TLS_GD32		104	/* PC-rel 32 bit for global dynamic
-+					   thread local data */
-+#define R_ARM_TLS_LDM32		105	/* PC-rel 32 bit for local dynamic
-+					   thread local data */
-+#define R_ARM_TLS_LDO32		106	/* 32 bit offset relative to TLS
-+					   block */
-+#define R_ARM_TLS_IE32		107	/* PC-rel 32 bit for GOT entry of
-+					   static TLS block offset */
-+#define R_ARM_TLS_LE32		108	/* 32 bit offset relative to static
-+					   TLS block */
-+#define	R_ARM_THM_TLS_DESCSEQ	129
-+#define R_ARM_IRELATIVE		160
-+#define R_ARM_RXPC25		249
-+#define R_ARM_RSBREL32		250
-+#define R_ARM_THM_RPC22		251
-+#define R_ARM_RREL32		252
-+#define R_ARM_RABS22		253
-+#define R_ARM_RPC24		254
-+#define R_ARM_RBASE		255
-+/* Keep this the last entry.  */
-+#define R_ARM_NUM		256
-+
-+/* IA-64 specific declarations.  */
-+
-+/* Processor specific flags for the Ehdr e_flags field.  */
-+#define EF_IA_64_MASKOS		0x0000000f	/* os-specific flags */
-+#define EF_IA_64_ABI64		0x00000010	/* 64-bit ABI */
-+#define EF_IA_64_ARCH		0xff000000	/* arch. version mask */
-+
-+/* Processor specific values for the Phdr p_type field.  */
-+#define PT_IA_64_ARCHEXT	(PT_LOPROC + 0)	/* arch extension bits */
-+#define PT_IA_64_UNWIND		(PT_LOPROC + 1)	/* ia64 unwind bits */
-+#define PT_IA_64_HP_OPT_ANOT	(PT_LOOS + 0x12)
-+#define PT_IA_64_HP_HSL_ANOT	(PT_LOOS + 0x13)
-+#define PT_IA_64_HP_STACK	(PT_LOOS + 0x14)
-+
-+/* Processor specific flags for the Phdr p_flags field.  */
-+#define PF_IA_64_NORECOV	0x80000000	/* spec insns w/o recovery */
-+
-+/* Processor specific values for the Shdr sh_type field.  */
-+#define SHT_IA_64_EXT		(SHT_LOPROC + 0) /* extension bits */
-+#define SHT_IA_64_UNWIND	(SHT_LOPROC + 1) /* unwind bits */
-+
-+/* Processor specific flags for the Shdr sh_flags field.  */
-+#define SHF_IA_64_SHORT		0x10000000	/* section near gp */
-+#define SHF_IA_64_NORECOV	0x20000000	/* spec insns w/o recovery */
-+
-+/* Processor specific values for the Dyn d_tag field.  */
-+#define DT_IA_64_PLT_RESERVE	(DT_LOPROC + 0)
-+#define DT_IA_64_NUM		1
-+
-+/* IA-64 relocations.  */
-+#define R_IA64_NONE		0x00	/* none */
-+#define R_IA64_IMM14		0x21	/* symbol + addend, add imm14 */
-+#define R_IA64_IMM22		0x22	/* symbol + addend, add imm22 */
-+#define R_IA64_IMM64		0x23	/* symbol + addend, mov imm64 */
-+#define R_IA64_DIR32MSB		0x24	/* symbol + addend, data4 MSB */
-+#define R_IA64_DIR32LSB		0x25	/* symbol + addend, data4 LSB */
-+#define R_IA64_DIR64MSB		0x26	/* symbol + addend, data8 MSB */
-+#define R_IA64_DIR64LSB		0x27	/* symbol + addend, data8 LSB */
-+#define R_IA64_GPREL22		0x2a	/* @gprel(sym + add), add imm22 */
-+#define R_IA64_GPREL64I		0x2b	/* @gprel(sym + add), mov imm64 */
-+#define R_IA64_GPREL32MSB	0x2c	/* @gprel(sym + add), data4 MSB */
-+#define R_IA64_GPREL32LSB	0x2d	/* @gprel(sym + add), data4 LSB */
-+#define R_IA64_GPREL64MSB	0x2e	/* @gprel(sym + add), data8 MSB */
-+#define R_IA64_GPREL64LSB	0x2f	/* @gprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF22		0x32	/* @ltoff(sym + add), add imm22 */
-+#define R_IA64_LTOFF64I		0x33	/* @ltoff(sym + add), mov imm64 */
-+#define R_IA64_PLTOFF22		0x3a	/* @pltoff(sym + add), add imm22 */
-+#define R_IA64_PLTOFF64I	0x3b	/* @pltoff(sym + add), mov imm64 */
-+#define R_IA64_PLTOFF64MSB	0x3e	/* @pltoff(sym + add), data8 MSB */
-+#define R_IA64_PLTOFF64LSB	0x3f	/* @pltoff(sym + add), data8 LSB */
-+#define R_IA64_FPTR64I		0x43	/* @fptr(sym + add), mov imm64 */
-+#define R_IA64_FPTR32MSB	0x44	/* @fptr(sym + add), data4 MSB */
-+#define R_IA64_FPTR32LSB	0x45	/* @fptr(sym + add), data4 LSB */
-+#define R_IA64_FPTR64MSB	0x46	/* @fptr(sym + add), data8 MSB */
-+#define R_IA64_FPTR64LSB	0x47	/* @fptr(sym + add), data8 LSB */
-+#define R_IA64_PCREL60B		0x48	/* @pcrel(sym + add), brl */
-+#define R_IA64_PCREL21B		0x49	/* @pcrel(sym + add), ptb, call */
-+#define R_IA64_PCREL21M		0x4a	/* @pcrel(sym + add), chk.s */
-+#define R_IA64_PCREL21F		0x4b	/* @pcrel(sym + add), fchkf */
-+#define R_IA64_PCREL32MSB	0x4c	/* @pcrel(sym + add), data4 MSB */
-+#define R_IA64_PCREL32LSB	0x4d	/* @pcrel(sym + add), data4 LSB */
-+#define R_IA64_PCREL64MSB	0x4e	/* @pcrel(sym + add), data8 MSB */
-+#define R_IA64_PCREL64LSB	0x4f	/* @pcrel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_FPTR22	0x52	/* @ltoff(@fptr(s+a)), imm22 */
-+#define R_IA64_LTOFF_FPTR64I	0x53	/* @ltoff(@fptr(s+a)), imm64 */
-+#define R_IA64_LTOFF_FPTR32MSB	0x54	/* @ltoff(@fptr(s+a)), data4 MSB */
-+#define R_IA64_LTOFF_FPTR32LSB	0x55	/* @ltoff(@fptr(s+a)), data4 LSB */
-+#define R_IA64_LTOFF_FPTR64MSB	0x56	/* @ltoff(@fptr(s+a)), data8 MSB */
-+#define R_IA64_LTOFF_FPTR64LSB	0x57	/* @ltoff(@fptr(s+a)), data8 LSB */
-+#define R_IA64_SEGREL32MSB	0x5c	/* @segrel(sym + add), data4 MSB */
-+#define R_IA64_SEGREL32LSB	0x5d	/* @segrel(sym + add), data4 LSB */
-+#define R_IA64_SEGREL64MSB	0x5e	/* @segrel(sym + add), data8 MSB */
-+#define R_IA64_SEGREL64LSB	0x5f	/* @segrel(sym + add), data8 LSB */
-+#define R_IA64_SECREL32MSB	0x64	/* @secrel(sym + add), data4 MSB */
-+#define R_IA64_SECREL32LSB	0x65	/* @secrel(sym + add), data4 LSB */
-+#define R_IA64_SECREL64MSB	0x66	/* @secrel(sym + add), data8 MSB */
-+#define R_IA64_SECREL64LSB	0x67	/* @secrel(sym + add), data8 LSB */
-+#define R_IA64_REL32MSB		0x6c	/* data 4 + REL */
-+#define R_IA64_REL32LSB		0x6d	/* data 4 + REL */
-+#define R_IA64_REL64MSB		0x6e	/* data 8 + REL */
-+#define R_IA64_REL64LSB		0x6f	/* data 8 + REL */
-+#define R_IA64_LTV32MSB		0x74	/* symbol + addend, data4 MSB */
-+#define R_IA64_LTV32LSB		0x75	/* symbol + addend, data4 LSB */
-+#define R_IA64_LTV64MSB		0x76	/* symbol + addend, data8 MSB */
-+#define R_IA64_LTV64LSB		0x77	/* symbol + addend, data8 LSB */
-+#define R_IA64_PCREL21BI	0x79	/* @pcrel(sym + add), 21bit inst */
-+#define R_IA64_PCREL22		0x7a	/* @pcrel(sym + add), 22bit inst */
-+#define R_IA64_PCREL64I		0x7b	/* @pcrel(sym + add), 64bit inst */
-+#define R_IA64_IPLTMSB		0x80	/* dynamic reloc, imported PLT, MSB */
-+#define R_IA64_IPLTLSB		0x81	/* dynamic reloc, imported PLT, LSB */
-+#define R_IA64_COPY		0x84	/* copy relocation */
-+#define R_IA64_SUB		0x85	/* Addend and symbol difference */
-+#define R_IA64_LTOFF22X		0x86	/* LTOFF22, relaxable.  */
-+#define R_IA64_LDXMOV		0x87	/* Use of LTOFF22X.  */
-+#define R_IA64_TPREL14		0x91	/* @tprel(sym + add), imm14 */
-+#define R_IA64_TPREL22		0x92	/* @tprel(sym + add), imm22 */
-+#define R_IA64_TPREL64I		0x93	/* @tprel(sym + add), imm64 */
-+#define R_IA64_TPREL64MSB	0x96	/* @tprel(sym + add), data8 MSB */
-+#define R_IA64_TPREL64LSB	0x97	/* @tprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_TPREL22	0x9a	/* @ltoff(@tprel(s+a)), imm2 */
-+#define R_IA64_DTPMOD64MSB	0xa6	/* @dtpmod(sym + add), data8 MSB */
-+#define R_IA64_DTPMOD64LSB	0xa7	/* @dtpmod(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_DTPMOD22	0xaa	/* @ltoff(@dtpmod(sym + add)), imm22 */
-+#define R_IA64_DTPREL14		0xb1	/* @dtprel(sym + add), imm14 */
-+#define R_IA64_DTPREL22		0xb2	/* @dtprel(sym + add), imm22 */
-+#define R_IA64_DTPREL64I	0xb3	/* @dtprel(sym + add), imm64 */
-+#define R_IA64_DTPREL32MSB	0xb4	/* @dtprel(sym + add), data4 MSB */
-+#define R_IA64_DTPREL32LSB	0xb5	/* @dtprel(sym + add), data4 LSB */
-+#define R_IA64_DTPREL64MSB	0xb6	/* @dtprel(sym + add), data8 MSB */
-+#define R_IA64_DTPREL64LSB	0xb7	/* @dtprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_DTPREL22	0xba	/* @ltoff(@dtprel(s+a)), imm22 */
-+
-+/* SH specific declarations */
-+
-+/* Processor specific flags for the ELF header e_flags field.  */
-+#define EF_SH_MACH_MASK		0x1f
-+#define EF_SH_UNKNOWN		0x0
-+#define EF_SH1			0x1
-+#define EF_SH2			0x2
-+#define EF_SH3			0x3
-+#define EF_SH_DSP		0x4
-+#define EF_SH3_DSP		0x5
-+#define EF_SH4AL_DSP		0x6
-+#define EF_SH3E			0x8
-+#define EF_SH4			0x9
-+#define EF_SH2E			0xb
-+#define EF_SH4A			0xc
-+#define EF_SH2A			0xd
-+#define EF_SH4_NOFPU		0x10
-+#define EF_SH4A_NOFPU		0x11
-+#define EF_SH4_NOMMU_NOFPU	0x12
-+#define EF_SH2A_NOFPU		0x13
-+#define EF_SH3_NOMMU		0x14
-+#define EF_SH2A_SH4_NOFPU	0x15
-+#define EF_SH2A_SH3_NOFPU	0x16
-+#define EF_SH2A_SH4		0x17
-+#define EF_SH2A_SH3E		0x18
-+
-+/* SH relocs.  */
-+#define	R_SH_NONE		0
-+#define	R_SH_DIR32		1
-+#define	R_SH_REL32		2
-+#define	R_SH_DIR8WPN		3
-+#define	R_SH_IND12W		4
-+#define	R_SH_DIR8WPL		5
-+#define	R_SH_DIR8WPZ		6
-+#define	R_SH_DIR8BP		7
-+#define	R_SH_DIR8W		8
-+#define	R_SH_DIR8L		9
-+#define	R_SH_SWITCH16		25
-+#define	R_SH_SWITCH32		26
-+#define	R_SH_USES		27
-+#define	R_SH_COUNT		28
-+#define	R_SH_ALIGN		29
-+#define	R_SH_CODE		30
-+#define	R_SH_DATA		31
-+#define	R_SH_LABEL		32
-+#define	R_SH_SWITCH8		33
-+#define	R_SH_GNU_VTINHERIT	34
-+#define	R_SH_GNU_VTENTRY	35
-+#define	R_SH_TLS_GD_32		144
-+#define	R_SH_TLS_LD_32		145
-+#define	R_SH_TLS_LDO_32		146
-+#define	R_SH_TLS_IE_32		147
-+#define	R_SH_TLS_LE_32		148
-+#define	R_SH_TLS_DTPMOD32	149
-+#define	R_SH_TLS_DTPOFF32	150
-+#define	R_SH_TLS_TPOFF32	151
-+#define	R_SH_GOT32		160
-+#define	R_SH_PLT32		161
-+#define	R_SH_COPY		162
-+#define	R_SH_GLOB_DAT		163
-+#define	R_SH_JMP_SLOT		164
-+#define	R_SH_RELATIVE		165
-+#define	R_SH_GOTOFF		166
-+#define	R_SH_GOTPC		167
-+/* Keep this the last entry.  */
-+#define	R_SH_NUM		256
-+
-+/* S/390 specific definitions.  */
-+
-+/* Valid values for the e_flags field.  */
-+
-+#define EF_S390_HIGH_GPRS    0x00000001  /* High GPRs kernel facility needed.  */
-+
-+/* Additional s390 relocs */
-+
-+#define R_390_NONE		0	/* No reloc.  */
-+#define R_390_8			1	/* Direct 8 bit.  */
-+#define R_390_12		2	/* Direct 12 bit.  */
-+#define R_390_16		3	/* Direct 16 bit.  */
-+#define R_390_32		4	/* Direct 32 bit.  */
-+#define R_390_PC32		5	/* PC relative 32 bit.	*/
-+#define R_390_GOT12		6	/* 12 bit GOT offset.  */
-+#define R_390_GOT32		7	/* 32 bit GOT offset.  */
-+#define R_390_PLT32		8	/* 32 bit PC relative PLT address.  */
-+#define R_390_COPY		9	/* Copy symbol at runtime.  */
-+#define R_390_GLOB_DAT		10	/* Create GOT entry.  */
-+#define R_390_JMP_SLOT		11	/* Create PLT entry.  */
-+#define R_390_RELATIVE		12	/* Adjust by program base.  */
-+#define R_390_GOTOFF32		13	/* 32 bit offset to GOT.	 */
-+#define R_390_GOTPC		14	/* 32 bit PC relative offset to GOT.  */
-+#define R_390_GOT16		15	/* 16 bit GOT offset.  */
-+#define R_390_PC16		16	/* PC relative 16 bit.	*/
-+#define R_390_PC16DBL		17	/* PC relative 16 bit shifted by 1.  */
-+#define R_390_PLT16DBL		18	/* 16 bit PC rel. PLT shifted by 1.  */
-+#define R_390_PC32DBL		19	/* PC relative 32 bit shifted by 1.  */
-+#define R_390_PLT32DBL		20	/* 32 bit PC rel. PLT shifted by 1.  */
-+#define R_390_GOTPCDBL		21	/* 32 bit PC rel. GOT shifted by 1.  */
-+#define R_390_64		22	/* Direct 64 bit.  */
-+#define R_390_PC64		23	/* PC relative 64 bit.	*/
-+#define R_390_GOT64		24	/* 64 bit GOT offset.  */
-+#define R_390_PLT64		25	/* 64 bit PC relative PLT address.  */
-+#define R_390_GOTENT		26	/* 32 bit PC rel. to GOT entry >> 1. */
-+#define R_390_GOTOFF16		27	/* 16 bit offset to GOT. */
-+#define R_390_GOTOFF64		28	/* 64 bit offset to GOT. */
-+#define R_390_GOTPLT12		29	/* 12 bit offset to jump slot.	*/
-+#define R_390_GOTPLT16		30	/* 16 bit offset to jump slot.	*/
-+#define R_390_GOTPLT32		31	/* 32 bit offset to jump slot.	*/
-+#define R_390_GOTPLT64		32	/* 64 bit offset to jump slot.	*/
-+#define R_390_GOTPLTENT		33	/* 32 bit rel. offset to jump slot.  */
-+#define R_390_PLTOFF16		34	/* 16 bit offset from GOT to PLT. */
-+#define R_390_PLTOFF32		35	/* 32 bit offset from GOT to PLT. */
-+#define R_390_PLTOFF64		36	/* 16 bit offset from GOT to PLT. */
-+#define R_390_TLS_LOAD		37	/* Tag for load insn in TLS code.  */
-+#define R_390_TLS_GDCALL	38	/* Tag for function call in general
-+					   dynamic TLS code. */
-+#define R_390_TLS_LDCALL	39	/* Tag for function call in local
-+					   dynamic TLS code. */
-+#define R_390_TLS_GD32		40	/* Direct 32 bit for general dynamic
-+					   thread local data.  */
-+#define R_390_TLS_GD64		41	/* Direct 64 bit for general dynamic
-+					  thread local data.  */
-+#define R_390_TLS_GOTIE12	42	/* 12 bit GOT offset for static TLS
-+					   block offset.  */
-+#define R_390_TLS_GOTIE32	43	/* 32 bit GOT offset for static TLS
-+					   block offset.  */
-+#define R_390_TLS_GOTIE64	44	/* 64 bit GOT offset for static TLS
-+					   block offset. */
-+#define R_390_TLS_LDM32		45	/* Direct 32 bit for local dynamic
-+					   thread local data in LE code.  */
-+#define R_390_TLS_LDM64		46	/* Direct 64 bit for local dynamic
-+					   thread local data in LE code.  */
-+#define R_390_TLS_IE32		47	/* 32 bit address of GOT entry for
-+					   negated static TLS block offset.  */
-+#define R_390_TLS_IE64		48	/* 64 bit address of GOT entry for
-+					   negated static TLS block offset.  */
-+#define R_390_TLS_IEENT		49	/* 32 bit rel. offset to GOT entry for
-+					   negated static TLS block offset.  */
-+#define R_390_TLS_LE32		50	/* 32 bit negated offset relative to
-+					   static TLS block.  */
-+#define R_390_TLS_LE64		51	/* 64 bit negated offset relative to
-+					   static TLS block.  */
-+#define R_390_TLS_LDO32		52	/* 32 bit offset relative to TLS
-+					   block.  */
-+#define R_390_TLS_LDO64		53	/* 64 bit offset relative to TLS
-+					   block.  */
-+#define R_390_TLS_DTPMOD	54	/* ID of module containing symbol.  */
-+#define R_390_TLS_DTPOFF	55	/* Offset in TLS block.	 */
-+#define R_390_TLS_TPOFF		56	/* Negated offset in static TLS
-+					   block.  */
-+#define R_390_20		57	/* Direct 20 bit.  */
-+#define R_390_GOT20		58	/* 20 bit GOT offset.  */
-+#define R_390_GOTPLT20		59	/* 20 bit offset to jump slot.  */
-+#define R_390_TLS_GOTIE20	60	/* 20 bit GOT offset for static TLS
-+					   block offset.  */
-+#define R_390_IRELATIVE         61      /* STT_GNU_IFUNC relocation.  */
-+/* Keep this the last entry.  */
-+#define R_390_NUM		62
-+
-+
-+/* CRIS relocations.  */
-+#define R_CRIS_NONE		0
-+#define R_CRIS_8		1
-+#define R_CRIS_16		2
-+#define R_CRIS_32		3
-+#define R_CRIS_8_PCREL		4
-+#define R_CRIS_16_PCREL		5
-+#define R_CRIS_32_PCREL		6
-+#define R_CRIS_GNU_VTINHERIT	7
-+#define R_CRIS_GNU_VTENTRY	8
-+#define R_CRIS_COPY		9
-+#define R_CRIS_GLOB_DAT		10
-+#define R_CRIS_JUMP_SLOT	11
-+#define R_CRIS_RELATIVE		12
-+#define R_CRIS_16_GOT		13
-+#define R_CRIS_32_GOT		14
-+#define R_CRIS_16_GOTPLT	15
-+#define R_CRIS_32_GOTPLT	16
-+#define R_CRIS_32_GOTREL	17
-+#define R_CRIS_32_PLT_GOTREL	18
-+#define R_CRIS_32_PLT_PCREL	19
-+
-+#define R_CRIS_NUM		20
-+
-+
-+/* AMD x86-64 relocations.  */
-+#define R_X86_64_NONE		0	/* No reloc */
-+#define R_X86_64_64		1	/* Direct 64 bit  */
-+#define R_X86_64_PC32		2	/* PC relative 32 bit signed */
-+#define R_X86_64_GOT32		3	/* 32 bit GOT entry */
-+#define R_X86_64_PLT32		4	/* 32 bit PLT address */
-+#define R_X86_64_COPY		5	/* Copy symbol at runtime */
-+#define R_X86_64_GLOB_DAT	6	/* Create GOT entry */
-+#define R_X86_64_JUMP_SLOT	7	/* Create PLT entry */
-+#define R_X86_64_RELATIVE	8	/* Adjust by program base */
-+#define R_X86_64_GOTPCREL	9	/* 32 bit signed PC relative
-+					   offset to GOT */
-+#define R_X86_64_32		10	/* Direct 32 bit zero extended */
-+#define R_X86_64_32S		11	/* Direct 32 bit sign extended */
-+#define R_X86_64_16		12	/* Direct 16 bit zero extended */
-+#define R_X86_64_PC16		13	/* 16 bit sign extended pc relative */
-+#define R_X86_64_8		14	/* Direct 8 bit sign extended  */
-+#define R_X86_64_PC8		15	/* 8 bit sign extended pc relative */
-+#define R_X86_64_DTPMOD64	16	/* ID of module containing symbol */
-+#define R_X86_64_DTPOFF64	17	/* Offset in module's TLS block */
-+#define R_X86_64_TPOFF64	18	/* Offset in initial TLS block */
-+#define R_X86_64_TLSGD		19	/* 32 bit signed PC relative offset
-+					   to two GOT entries for GD symbol */
-+#define R_X86_64_TLSLD		20	/* 32 bit signed PC relative offset
-+					   to two GOT entries for LD symbol */
-+#define R_X86_64_DTPOFF32	21	/* Offset in TLS block */
-+#define R_X86_64_GOTTPOFF	22	/* 32 bit signed PC relative offset
-+					   to GOT entry for IE symbol */
-+#define R_X86_64_TPOFF32	23	/* Offset in initial TLS block */
-+#define R_X86_64_PC64		24	/* PC relative 64 bit */
-+#define R_X86_64_GOTOFF64	25	/* 64 bit offset to GOT */
-+#define R_X86_64_GOTPC32	26	/* 32 bit signed pc relative
-+					   offset to GOT */
-+#define R_X86_64_GOT64		27	/* 64-bit GOT entry offset */
-+#define R_X86_64_GOTPCREL64	28	/* 64-bit PC relative offset
-+					   to GOT entry */
-+#define R_X86_64_GOTPC64	29	/* 64-bit PC relative offset to GOT */
-+#define R_X86_64_GOTPLT64	30 	/* like GOT64, says PLT entry needed */
-+#define R_X86_64_PLTOFF64	31	/* 64-bit GOT relative offset
-+					   to PLT entry */
-+#define R_X86_64_SIZE32		32	/* Size of symbol plus 32-bit addend */
-+#define R_X86_64_SIZE64		33	/* Size of symbol plus 64-bit addend */
-+#define R_X86_64_GOTPC32_TLSDESC 34	/* GOT offset for TLS descriptor.  */
-+#define R_X86_64_TLSDESC_CALL   35	/* Marker for call through TLS
-+					   descriptor.  */
-+#define R_X86_64_TLSDESC        36	/* TLS descriptor.  */
-+#define R_X86_64_IRELATIVE	37	/* Adjust indirectly by program base */
-+#define R_X86_64_RELATIVE64	38	/* 64-bit adjust by program base */
-+
-+#define R_X86_64_NUM		39
-+
-+
-+/* AM33 relocations.  */
-+#define R_MN10300_NONE		0	/* No reloc.  */
-+#define R_MN10300_32		1	/* Direct 32 bit.  */
-+#define R_MN10300_16		2	/* Direct 16 bit.  */
-+#define R_MN10300_8		3	/* Direct 8 bit.  */
-+#define R_MN10300_PCREL32	4	/* PC-relative 32-bit.  */
-+#define R_MN10300_PCREL16	5	/* PC-relative 16-bit signed.  */
-+#define R_MN10300_PCREL8	6	/* PC-relative 8-bit signed.  */
-+#define R_MN10300_GNU_VTINHERIT	7	/* Ancient C++ vtable garbage... */
-+#define R_MN10300_GNU_VTENTRY	8	/* ... collection annotation.  */
-+#define R_MN10300_24		9	/* Direct 24 bit.  */
-+#define R_MN10300_GOTPC32	10	/* 32-bit PCrel offset to GOT.  */
-+#define R_MN10300_GOTPC16	11	/* 16-bit PCrel offset to GOT.  */
-+#define R_MN10300_GOTOFF32	12	/* 32-bit offset from GOT.  */
-+#define R_MN10300_GOTOFF24	13	/* 24-bit offset from GOT.  */
-+#define R_MN10300_GOTOFF16	14	/* 16-bit offset from GOT.  */
-+#define R_MN10300_PLT32		15	/* 32-bit PCrel to PLT entry.  */
-+#define R_MN10300_PLT16		16	/* 16-bit PCrel to PLT entry.  */
-+#define R_MN10300_GOT32		17	/* 32-bit offset to GOT entry.  */
-+#define R_MN10300_GOT24		18	/* 24-bit offset to GOT entry.  */
-+#define R_MN10300_GOT16		19	/* 16-bit offset to GOT entry.  */
-+#define R_MN10300_COPY		20	/* Copy symbol at runtime.  */
-+#define R_MN10300_GLOB_DAT	21	/* Create GOT entry.  */
-+#define R_MN10300_JMP_SLOT	22	/* Create PLT entry.  */
-+#define R_MN10300_RELATIVE	23	/* Adjust by program base.  */
-+
-+#define R_MN10300_NUM		24
-+
-+
-+/* M32R relocs.  */
-+#define R_M32R_NONE		0	/* No reloc. */
-+#define R_M32R_16		1	/* Direct 16 bit. */
-+#define R_M32R_32		2	/* Direct 32 bit. */
-+#define R_M32R_24		3	/* Direct 24 bit. */
-+#define R_M32R_10_PCREL		4	/* PC relative 10 bit shifted. */
-+#define R_M32R_18_PCREL		5	/* PC relative 18 bit shifted. */
-+#define R_M32R_26_PCREL		6	/* PC relative 26 bit shifted. */
-+#define R_M32R_HI16_ULO		7	/* High 16 bit with unsigned low. */
-+#define R_M32R_HI16_SLO		8	/* High 16 bit with signed low. */
-+#define R_M32R_LO16		9	/* Low 16 bit. */
-+#define R_M32R_SDA16		10	/* 16 bit offset in SDA. */
-+#define R_M32R_GNU_VTINHERIT	11
-+#define R_M32R_GNU_VTENTRY	12
-+/* M32R relocs use SHT_RELA.  */
-+#define R_M32R_16_RELA		33	/* Direct 16 bit. */
-+#define R_M32R_32_RELA		34	/* Direct 32 bit. */
-+#define R_M32R_24_RELA		35	/* Direct 24 bit. */
-+#define R_M32R_10_PCREL_RELA	36	/* PC relative 10 bit shifted. */
-+#define R_M32R_18_PCREL_RELA	37	/* PC relative 18 bit shifted. */
-+#define R_M32R_26_PCREL_RELA	38	/* PC relative 26 bit shifted. */
-+#define R_M32R_HI16_ULO_RELA	39	/* High 16 bit with unsigned low */
-+#define R_M32R_HI16_SLO_RELA	40	/* High 16 bit with signed low */
-+#define R_M32R_LO16_RELA	41	/* Low 16 bit */
-+#define R_M32R_SDA16_RELA	42	/* 16 bit offset in SDA */
-+#define R_M32R_RELA_GNU_VTINHERIT	43
-+#define R_M32R_RELA_GNU_VTENTRY	44
-+#define R_M32R_REL32		45	/* PC relative 32 bit.  */
-+
-+#define R_M32R_GOT24		48	/* 24 bit GOT entry */
-+#define R_M32R_26_PLTREL	49	/* 26 bit PC relative to PLT shifted */
-+#define R_M32R_COPY		50	/* Copy symbol at runtime */
-+#define R_M32R_GLOB_DAT		51	/* Create GOT entry */
-+#define R_M32R_JMP_SLOT		52	/* Create PLT entry */
-+#define R_M32R_RELATIVE		53	/* Adjust by program base */
-+#define R_M32R_GOTOFF		54	/* 24 bit offset to GOT */
-+#define R_M32R_GOTPC24		55	/* 24 bit PC relative offset to GOT */
-+#define R_M32R_GOT16_HI_ULO	56	/* High 16 bit GOT entry with unsigned
-+					   low */
-+#define R_M32R_GOT16_HI_SLO	57	/* High 16 bit GOT entry with signed
-+					   low */
-+#define R_M32R_GOT16_LO		58	/* Low 16 bit GOT entry */
-+#define R_M32R_GOTPC_HI_ULO	59	/* High 16 bit PC relative offset to
-+					   GOT with unsigned low */
-+#define R_M32R_GOTPC_HI_SLO	60	/* High 16 bit PC relative offset to
-+					   GOT with signed low */
-+#define R_M32R_GOTPC_LO		61	/* Low 16 bit PC relative offset to
-+					   GOT */
-+#define R_M32R_GOTOFF_HI_ULO	62	/* High 16 bit offset to GOT
-+					   with unsigned low */
-+#define R_M32R_GOTOFF_HI_SLO	63	/* High 16 bit offset to GOT
-+					   with signed low */
-+#define R_M32R_GOTOFF_LO	64	/* Low 16 bit offset to GOT */
-+#define R_M32R_NUM		256	/* Keep this the last entry. */
-+
-+
-+/* TILEPro relocations.  */
-+#define R_TILEPRO_NONE		0	/* No reloc */
-+#define R_TILEPRO_32		1	/* Direct 32 bit */
-+#define R_TILEPRO_16		2	/* Direct 16 bit */
-+#define R_TILEPRO_8		3	/* Direct 8 bit */
-+#define R_TILEPRO_32_PCREL	4	/* PC relative 32 bit */
-+#define R_TILEPRO_16_PCREL	5	/* PC relative 16 bit */
-+#define R_TILEPRO_8_PCREL	6	/* PC relative 8 bit */
-+#define R_TILEPRO_LO16		7	/* Low 16 bit */
-+#define R_TILEPRO_HI16		8	/* High 16 bit */
-+#define R_TILEPRO_HA16		9	/* High 16 bit, adjusted */
-+#define R_TILEPRO_COPY		10	/* Copy relocation */
-+#define R_TILEPRO_GLOB_DAT	11	/* Create GOT entry */
-+#define R_TILEPRO_JMP_SLOT	12	/* Create PLT entry */
-+#define R_TILEPRO_RELATIVE	13	/* Adjust by program base */
-+#define R_TILEPRO_BROFF_X1	14	/* X1 pipe branch offset */
-+#define R_TILEPRO_JOFFLONG_X1	15	/* X1 pipe jump offset */
-+#define R_TILEPRO_JOFFLONG_X1_PLT 16	/* X1 pipe jump offset to PLT */
-+#define R_TILEPRO_IMM8_X0	17	/* X0 pipe 8-bit */
-+#define R_TILEPRO_IMM8_Y0	18	/* Y0 pipe 8-bit */
-+#define R_TILEPRO_IMM8_X1	19	/* X1 pipe 8-bit */
-+#define R_TILEPRO_IMM8_Y1	20	/* Y1 pipe 8-bit */
-+#define R_TILEPRO_MT_IMM15_X1	21	/* X1 pipe mtspr */
-+#define R_TILEPRO_MF_IMM15_X1	22	/* X1 pipe mfspr */
-+#define R_TILEPRO_IMM16_X0	23	/* X0 pipe 16-bit */
-+#define R_TILEPRO_IMM16_X1	24	/* X1 pipe 16-bit */
-+#define R_TILEPRO_IMM16_X0_LO	25	/* X0 pipe low 16-bit */
-+#define R_TILEPRO_IMM16_X1_LO	26	/* X1 pipe low 16-bit */
-+#define R_TILEPRO_IMM16_X0_HI	27	/* X0 pipe high 16-bit */
-+#define R_TILEPRO_IMM16_X1_HI	28	/* X1 pipe high 16-bit */
-+#define R_TILEPRO_IMM16_X0_HA	29	/* X0 pipe high 16-bit, adjusted */
-+#define R_TILEPRO_IMM16_X1_HA	30	/* X1 pipe high 16-bit, adjusted */
-+#define R_TILEPRO_IMM16_X0_PCREL 31	/* X0 pipe PC relative 16 bit */
-+#define R_TILEPRO_IMM16_X1_PCREL 32	/* X1 pipe PC relative 16 bit */
-+#define R_TILEPRO_IMM16_X0_LO_PCREL 33	/* X0 pipe PC relative low 16 bit */
-+#define R_TILEPRO_IMM16_X1_LO_PCREL 34	/* X1 pipe PC relative low 16 bit */
-+#define R_TILEPRO_IMM16_X0_HI_PCREL 35	/* X0 pipe PC relative high 16 bit */
-+#define R_TILEPRO_IMM16_X1_HI_PCREL 36	/* X1 pipe PC relative high 16 bit */
-+#define R_TILEPRO_IMM16_X0_HA_PCREL 37	/* X0 pipe PC relative ha() 16 bit */
-+#define R_TILEPRO_IMM16_X1_HA_PCREL 38	/* X1 pipe PC relative ha() 16 bit */
-+#define R_TILEPRO_IMM16_X0_GOT	39	/* X0 pipe 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT	40	/* X1 pipe 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_LO 41	/* X0 pipe low 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_LO 42	/* X1 pipe low 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_HI 43	/* X0 pipe high 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_HI 44	/* X1 pipe high 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_HA 45	/* X0 pipe ha() 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_HA 46	/* X1 pipe ha() 16-bit GOT offset */
-+#define R_TILEPRO_MMSTART_X0	47	/* X0 pipe mm "start" */
-+#define R_TILEPRO_MMEND_X0	48	/* X0 pipe mm "end" */
-+#define R_TILEPRO_MMSTART_X1	49	/* X1 pipe mm "start" */
-+#define R_TILEPRO_MMEND_X1	50	/* X1 pipe mm "end" */
-+#define R_TILEPRO_SHAMT_X0	51	/* X0 pipe shift amount */
-+#define R_TILEPRO_SHAMT_X1	52	/* X1 pipe shift amount */
-+#define R_TILEPRO_SHAMT_Y0	53	/* Y0 pipe shift amount */
-+#define R_TILEPRO_SHAMT_Y1	54	/* Y1 pipe shift amount */
-+#define R_TILEPRO_DEST_IMM8_X1	55	/* X1 pipe destination 8-bit */
-+/* Relocs 56-59 are currently not defined.  */
-+#define R_TILEPRO_TLS_GD_CALL	60	/* "jal" for TLS GD */
-+#define R_TILEPRO_IMM8_X0_TLS_GD_ADD 61	/* X0 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_X1_TLS_GD_ADD 62	/* X1 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_Y0_TLS_GD_ADD 63	/* Y0 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_Y1_TLS_GD_ADD 64	/* Y1 pipe "addi" for TLS GD */
-+#define R_TILEPRO_TLS_IE_LOAD	65	/* "lw_tls" for TLS IE */
-+#define R_TILEPRO_IMM16_X0_TLS_GD 66	/* X0 pipe 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD 67	/* X1 pipe 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_LO 68	/* X0 pipe low 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_LO 69	/* X1 pipe low 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_HI 70	/* X0 pipe high 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_HI 71	/* X1 pipe high 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_HA 72	/* X0 pipe ha() 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_HA 73	/* X1 pipe ha() 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE 74	/* X0 pipe 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE 75	/* X1 pipe 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_LO 76	/* X0 pipe low 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_LO 77	/* X1 pipe low 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_HI 78	/* X0 pipe high 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_HI 79	/* X1 pipe high 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_HA 80	/* X0 pipe ha() 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_HA 81	/* X1 pipe ha() 16-bit TLS IE offset */
-+#define R_TILEPRO_TLS_DTPMOD32	82	/* ID of module containing symbol */
-+#define R_TILEPRO_TLS_DTPOFF32	83	/* Offset in TLS block */
-+#define R_TILEPRO_TLS_TPOFF32	84	/* Offset in static TLS block */
-+#define R_TILEPRO_IMM16_X0_TLS_LE 85	/* X0 pipe 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE 86	/* X1 pipe 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_LO 87	/* X0 pipe low 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_LO 88	/* X1 pipe low 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_HI 89	/* X0 pipe high 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_HI 90	/* X1 pipe high 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_HA 91	/* X0 pipe ha() 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_HA 92	/* X1 pipe ha() 16-bit TLS LE offset */
-+
-+#define R_TILEPRO_GNU_VTINHERIT	128	/* GNU C++ vtable hierarchy */
-+#define R_TILEPRO_GNU_VTENTRY	129	/* GNU C++ vtable member usage */
-+
-+#define R_TILEPRO_NUM		130
-+
-+
-+/* TILE-Gx relocations.  */
-+#define R_TILEGX_NONE		0	/* No reloc */
-+#define R_TILEGX_64		1	/* Direct 64 bit */
-+#define R_TILEGX_32		2	/* Direct 32 bit */
-+#define R_TILEGX_16		3	/* Direct 16 bit */
-+#define R_TILEGX_8		4	/* Direct 8 bit */
-+#define R_TILEGX_64_PCREL	5	/* PC relative 64 bit */
-+#define R_TILEGX_32_PCREL	6	/* PC relative 32 bit */
-+#define R_TILEGX_16_PCREL	7	/* PC relative 16 bit */
-+#define R_TILEGX_8_PCREL	8	/* PC relative 8 bit */
-+#define R_TILEGX_HW0		9	/* hword 0 16-bit */
-+#define R_TILEGX_HW1		10	/* hword 1 16-bit */
-+#define R_TILEGX_HW2		11	/* hword 2 16-bit */
-+#define R_TILEGX_HW3		12	/* hword 3 16-bit */
-+#define R_TILEGX_HW0_LAST	13	/* last hword 0 16-bit */
-+#define R_TILEGX_HW1_LAST	14	/* last hword 1 16-bit */
-+#define R_TILEGX_HW2_LAST	15	/* last hword 2 16-bit */
-+#define R_TILEGX_COPY		16	/* Copy relocation */
-+#define R_TILEGX_GLOB_DAT	17	/* Create GOT entry */
-+#define R_TILEGX_JMP_SLOT	18	/* Create PLT entry */
-+#define R_TILEGX_RELATIVE	19	/* Adjust by program base */
-+#define R_TILEGX_BROFF_X1	20	/* X1 pipe branch offset */
-+#define R_TILEGX_JUMPOFF_X1	21	/* X1 pipe jump offset */
-+#define R_TILEGX_JUMPOFF_X1_PLT	22	/* X1 pipe jump offset to PLT */
-+#define R_TILEGX_IMM8_X0	23	/* X0 pipe 8-bit */
-+#define R_TILEGX_IMM8_Y0	24	/* Y0 pipe 8-bit */
-+#define R_TILEGX_IMM8_X1	25	/* X1 pipe 8-bit */
-+#define R_TILEGX_IMM8_Y1	26	/* Y1 pipe 8-bit */
-+#define R_TILEGX_DEST_IMM8_X1	27	/* X1 pipe destination 8-bit */
-+#define R_TILEGX_MT_IMM14_X1	28	/* X1 pipe mtspr */
-+#define R_TILEGX_MF_IMM14_X1	29	/* X1 pipe mfspr */
-+#define R_TILEGX_MMSTART_X0	30	/* X0 pipe mm "start" */
-+#define R_TILEGX_MMEND_X0	31	/* X0 pipe mm "end" */
-+#define R_TILEGX_SHAMT_X0	32	/* X0 pipe shift amount */
-+#define R_TILEGX_SHAMT_X1	33	/* X1 pipe shift amount */
-+#define R_TILEGX_SHAMT_Y0	34	/* Y0 pipe shift amount */
-+#define R_TILEGX_SHAMT_Y1	35	/* Y1 pipe shift amount */
-+#define R_TILEGX_IMM16_X0_HW0	36	/* X0 pipe hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0	37	/* X1 pipe hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1	38	/* X0 pipe hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1	39	/* X1 pipe hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2	40	/* X0 pipe hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2	41	/* X1 pipe hword 2 */
-+#define R_TILEGX_IMM16_X0_HW3	42	/* X0 pipe hword 3 */
-+#define R_TILEGX_IMM16_X1_HW3	43	/* X1 pipe hword 3 */
-+#define R_TILEGX_IMM16_X0_HW0_LAST 44	/* X0 pipe last hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_LAST 45	/* X1 pipe last hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_LAST 46	/* X0 pipe last hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_LAST 47	/* X1 pipe last hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_LAST 48	/* X0 pipe last hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_LAST 49	/* X1 pipe last hword 2 */
-+#define R_TILEGX_IMM16_X0_HW0_PCREL 50	/* X0 pipe PC relative hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_PCREL 51	/* X1 pipe PC relative hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_PCREL 52	/* X0 pipe PC relative hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_PCREL 53	/* X1 pipe PC relative hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_PCREL 54	/* X0 pipe PC relative hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_PCREL 55	/* X1 pipe PC relative hword 2 */
-+#define R_TILEGX_IMM16_X0_HW3_PCREL 56	/* X0 pipe PC relative hword 3 */
-+#define R_TILEGX_IMM16_X1_HW3_PCREL 57	/* X1 pipe PC relative hword 3 */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_PCREL 58 /* X0 pipe PC-rel last hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_PCREL 59 /* X1 pipe PC-rel last hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_PCREL 60 /* X0 pipe PC-rel last hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_PCREL 61 /* X1 pipe PC-rel last hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_LAST_PCREL 62 /* X0 pipe PC-rel last hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_LAST_PCREL 63 /* X1 pipe PC-rel last hword 2 */
-+#define R_TILEGX_IMM16_X0_HW0_GOT 64	/* X0 pipe hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW0_GOT 65	/* X1 pipe hword 0 GOT offset */
-+/* Relocs 66-71 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_GOT 72 /* X0 pipe last hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_GOT 73 /* X1 pipe last hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_GOT 74 /* X0 pipe last hword 1 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_GOT 75 /* X1 pipe last hword 1 GOT offset */
-+/* Relocs 76-77 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_GD 78	/* X0 pipe hword 0 TLS GD offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_GD 79	/* X1 pipe hword 0 TLS GD offset */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_LE 80	/* X0 pipe hword 0 TLS LE offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_LE 81	/* X1 pipe hword 0 TLS LE offset */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_LE 82 /* X0 pipe last hword 0 LE off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_LE 83 /* X1 pipe last hword 0 LE off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_LE 84 /* X0 pipe last hword 1 LE off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_LE 85 /* X1 pipe last hword 1 LE off */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_GD 86 /* X0 pipe last hword 0 GD off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_GD 87 /* X1 pipe last hword 0 GD off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_GD 88 /* X0 pipe last hword 1 GD off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_GD 89 /* X1 pipe last hword 1 GD off */
-+/* Relocs 90-91 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_IE 92	/* X0 pipe hword 0 TLS IE offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_IE 93	/* X1 pipe hword 0 TLS IE offset */
-+/* Relocs 94-99 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_IE 100 /* X0 pipe last hword 0 IE off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_IE 101 /* X1 pipe last hword 0 IE off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_IE 102 /* X0 pipe last hword 1 IE off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_IE 103 /* X1 pipe last hword 1 IE off */
-+/* Relocs 104-105 are currently not defined.  */
-+#define R_TILEGX_TLS_DTPMOD64	106	/* 64-bit ID of symbol's module */
-+#define R_TILEGX_TLS_DTPOFF64	107	/* 64-bit offset in TLS block */
-+#define R_TILEGX_TLS_TPOFF64	108	/* 64-bit offset in static TLS block */
-+#define R_TILEGX_TLS_DTPMOD32	109	/* 32-bit ID of symbol's module */
-+#define R_TILEGX_TLS_DTPOFF32	110	/* 32-bit offset in TLS block */
-+#define R_TILEGX_TLS_TPOFF32	111	/* 32-bit offset in static TLS block */
-+#define R_TILEGX_TLS_GD_CALL	112	/* "jal" for TLS GD */
-+#define R_TILEGX_IMM8_X0_TLS_GD_ADD 113	/* X0 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_X1_TLS_GD_ADD 114	/* X1 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_Y0_TLS_GD_ADD 115	/* Y0 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_Y1_TLS_GD_ADD 116	/* Y1 pipe "addi" for TLS GD */
-+#define R_TILEGX_TLS_IE_LOAD	117	/* "ld_tls" for TLS IE */
-+#define R_TILEGX_IMM8_X0_TLS_ADD 118	/* X0 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_X1_TLS_ADD 119	/* X1 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_Y0_TLS_ADD 120	/* Y0 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_Y1_TLS_ADD 121	/* Y1 pipe "addi" for TLS GD/IE */
-+
-+#define R_TILEGX_GNU_VTINHERIT	128	/* GNU C++ vtable hierarchy */
-+#define R_TILEGX_GNU_VTENTRY	129	/* GNU C++ vtable member usage */
-+
-+#define R_TILEGX_NUM		130
-+
-+#endif	/* elf.h */
---- a/scripts/mod/mk_elfconfig.c
-+++ b/scripts/mod/mk_elfconfig.c
-@@ -2,7 +2,11 @@
- #include <stdio.h>
- #include <stdlib.h>
- #include <string.h>
-+#ifndef __APPLE__
- #include <elf.h>
-+#else
-+#include "elf.h"
-+#endif
- 
- int
- main(int argc, char **argv)
---- a/scripts/mod/modpost.h
-+++ b/scripts/mod/modpost.h
-@@ -8,7 +8,11 @@
- #include <sys/mman.h>
- #include <fcntl.h>
- #include <unistd.h>
-+#if !(defined(__APPLE__) || defined(__CYGWIN__))
- #include <elf.h>
-+#else
-+#include "elf.h"
-+#endif
- 
- #include "elfconfig.h"
- 
diff --git a/target/linux/generic/hack-5.4/211-darwin-uuid-typedef-clash.patch b/target/linux/generic/hack-5.4/211-darwin-uuid-typedef-clash.patch
deleted file mode 100644
index 50a6227148..0000000000
--- a/target/linux/generic/hack-5.4/211-darwin-uuid-typedef-clash.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From e44fc2af1ddc452b6659d08c16973d65c73b7d0a Mon Sep 17 00:00:00 2001
-From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Date: Wed, 5 Feb 2020 18:36:43 +0000
-Subject: [PATCH] file2alias: build on macos
-
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
----
- scripts/mod/file2alias.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/scripts/mod/file2alias.c
-+++ b/scripts/mod/file2alias.c
-@@ -38,6 +38,9 @@ typedef struct {
- 	__u8 b[16];
- } guid_t;
- 
-+#ifdef __APPLE__
-+#define uuid_t compat_uuid_t
-+#endif
- /* backwards compatibility, don't use in new code */
- typedef struct {
- 	__u8 b[16];
diff --git a/target/linux/generic/hack-5.4/212-tools_portability.patch b/target/linux/generic/hack-5.4/212-tools_portability.patch
deleted file mode 100644
index 0d8eb6fb9d..0000000000
--- a/target/linux/generic/hack-5.4/212-tools_portability.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From 48232d3d931c95953ce2ddfe7da7bb164aef6a73 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:03:16 +0200
-Subject: fix portability of some includes files in tools/ used on the host
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- tools/include/tools/be_byteshift.h |  4 ++++
- tools/include/tools/le_byteshift.h |  4 ++++
- tools/include/tools/linux_types.h  | 22 ++++++++++++++++++++++
- 3 files changed, 30 insertions(+)
- create mode 100644 tools/include/tools/linux_types.h
-
---- a/tools/include/tools/be_byteshift.h
-+++ b/tools/include/tools/be_byteshift.h
-@@ -2,6 +2,10 @@
- #ifndef _TOOLS_BE_BYTESHIFT_H
- #define _TOOLS_BE_BYTESHIFT_H
- 
-+#ifndef __linux__
-+#include "linux_types.h"
-+#endif
-+
- #include <stdint.h>
- 
- static inline uint16_t __get_unaligned_be16(const uint8_t *p)
---- a/tools/include/tools/le_byteshift.h
-+++ b/tools/include/tools/le_byteshift.h
-@@ -2,6 +2,10 @@
- #ifndef _TOOLS_LE_BYTESHIFT_H
- #define _TOOLS_LE_BYTESHIFT_H
- 
-+#ifndef __linux__
-+#include "linux_types.h"
-+#endif
-+
- #include <stdint.h>
- 
- static inline uint16_t __get_unaligned_le16(const uint8_t *p)
---- /dev/null
-+++ b/tools/include/tools/linux_types.h
-@@ -0,0 +1,26 @@
-+#ifndef __LINUX_TYPES_H
-+#define __LINUX_TYPES_H
-+
-+#include <stdint.h>
-+
-+typedef int8_t __s8;
-+typedef uint8_t __u8;
-+typedef uint8_t __be8;
-+typedef uint8_t __le8;
-+
-+typedef int16_t __s16;
-+typedef uint16_t __u16;
-+typedef uint16_t __be16;
-+typedef uint16_t __le16;
-+
-+typedef int32_t __s32;
-+typedef uint32_t __u32;
-+typedef uint32_t __be32;
-+typedef uint32_t __le32;
-+
-+typedef int64_t __s64;
-+typedef uint64_t __u64;
-+typedef uint64_t __be64;
-+typedef uint64_t __le64;
-+
-+#endif
---- a/tools/include/linux/types.h
-+++ b/tools/include/linux/types.h
-@@ -7,8 +7,12 @@
- #include <stdint.h>
- 
- #define __SANE_USERSPACE_TYPES__	/* For PPC64, to get LL64 types */
-+#ifndef __linux__
-+#include <tools/linux_types.h>
-+#else
- #include <asm/types.h>
- #include <asm/posix_types.h>
-+#endif
- 
- struct page;
- struct kmem_cache;
---- a/tools/perf/pmu-events/jevents.c
-+++ b/tools/perf/pmu-events/jevents.c
-@@ -1,4 +1,6 @@
-+#ifdef __linux__
- #define  _XOPEN_SOURCE 500	/* needed for nftw() */
-+#endif
- #define  _GNU_SOURCE		/* needed for asprintf() */
- 
- /* Parse event JSON files */
-@@ -35,6 +37,7 @@
- #include <stdlib.h>
- #include <errno.h>
- #include <string.h>
-+#include <strings.h>
- #include <ctype.h>
- #include <unistd.h>
- #include <stdarg.h>
---- a/tools/perf/pmu-events/json.c
-+++ b/tools/perf/pmu-events/json.c
-@@ -38,7 +38,6 @@
- #include <unistd.h>
- #include "jsmn.h"
- #include "json.h"
--#include <linux/kernel.h>
- 
- 
- static char *mapfile(const char *fn, size_t *size)
diff --git a/target/linux/generic/hack-5.4/214-spidev_h_portability.patch b/target/linux/generic/hack-5.4/214-spidev_h_portability.patch
deleted file mode 100644
index 415e9a423c..0000000000
--- a/target/linux/generic/hack-5.4/214-spidev_h_portability.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From be9be95ff10e16a5b4ad36f903978d0cc5747024 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:04:08 +0200
-Subject: kernel: fix linux/spi/spidev.h portability issues with musl
-
-Felix will try to get this define included into musl
-
-lede-commit: 795e7cf60de19e7a076a46874fab7bb88b43bbff
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/spi/spidev.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/uapi/linux/spi/spidev.h
-+++ b/include/uapi/linux/spi/spidev.h
-@@ -117,7 +117,7 @@ struct spi_ioc_transfer {
- 
- /* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */
- #define SPI_MSGSIZE(N) \
--	((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \
-+	((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << 13)) \
- 		? ((N)*(sizeof (struct spi_ioc_transfer))) : 0)
- #define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)])
- 
diff --git a/target/linux/generic/hack-5.4/220-arm-gc_sections.patch b/target/linux/generic/hack-5.4/220-arm-gc_sections.patch
deleted file mode 100644
index 14e2461797..0000000000
--- a/target/linux/generic/hack-5.4/220-arm-gc_sections.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From e3d8676f5722b7622685581e06e8f53e6138e3ab Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 23:42:36 +0200
-Subject: use -ffunction-sections, -fdata-sections and --gc-sections
-
-In combination with kernel symbol export stripping this significantly reduces
-the kernel image size. Used on both ARM and MIPS architectures.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- Makefile                          | 10 +++----
- arch/arm/Kconfig                  |  1 +
- arch/arm/boot/compressed/Makefile |  1 +
- arch/arm/kernel/vmlinux.lds.S     | 26 ++++++++--------
- arch/mips/Kconfig                 |  1 +
- arch/mips/kernel/vmlinux.lds.S    |  4 +--
- include/asm-generic/vmlinux.lds.h | 63 ++++++++++++++++++++-------------------
- 7 files changed, 55 insertions(+), 51 deletions(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -112,6 +112,7 @@ config ARM
- 	select HAVE_UID16
- 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
- 	select IRQ_FORCED_THREADING
-+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
- 	select MODULES_USE_ELF_REL
- 	select NEED_DMA_MAP_STATE
- 	select OF_EARLY_FLATTREE if OF
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -108,6 +108,7 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
- ORIG_CFLAGS := $(KBUILD_CFLAGS)
- KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
- endif
-+KBUILD_CFLAGS_KERNEL := $(patsubst -f%-sections,,$(KBUILD_CFLAGS_KERNEL))
- 
- # -fstack-protector-strong triggers protection checks in this code,
- # but it is being used too early to link to meaningful stack_chk logic.
---- a/arch/arm/kernel/vmlinux.lds.S
-+++ b/arch/arm/kernel/vmlinux.lds.S
-@@ -73,7 +73,7 @@ SECTIONS
- 	. = ALIGN(4);
- 	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- 		__start___ex_table = .;
--		ARM_MMU_KEEP(*(__ex_table))
-+		KEEP(*(__ex_table))
- 		__stop___ex_table = .;
- 	}
- 
-@@ -100,24 +100,24 @@ SECTIONS
- 	}
- 	.init.arch.info : {
- 		__arch_info_begin = .;
--		*(.arch.info.init)
-+		KEEP(*(.arch.info.init))
- 		__arch_info_end = .;
- 	}
- 	.init.tagtable : {
- 		__tagtable_begin = .;
--		*(.taglist.init)
-+		KEEP(*(.taglist.init))
- 		__tagtable_end = .;
- 	}
- #ifdef CONFIG_SMP_ON_UP
- 	.init.smpalt : {
- 		__smpalt_begin = .;
--		*(.alt.smp.init)
-+		KEEP(*(.alt.smp.init))
- 		__smpalt_end = .;
- 	}
- #endif
- 	.init.pv_table : {
- 		__pv_table_begin = .;
--		*(.pv_table)
-+		KEEP(*(.pv_table))
- 		__pv_table_end = .;
- 	}
- 
---- a/arch/arm/kernel/vmlinux.lds.h
-+++ b/arch/arm/kernel/vmlinux.lds.h
-@@ -28,7 +28,7 @@
- #define PROC_INFO							\
- 		. = ALIGN(4);						\
- 		__proc_info_begin = .;					\
--		*(.proc.info.init)					\
-+		KEEP(*(.proc.info.init))				\
- 		__proc_info_end = .;
- 
- #define HYPERVISOR_TEXT							\
-@@ -39,11 +39,11 @@
- #define IDMAP_TEXT							\
- 		ALIGN_FUNCTION();					\
- 		__idmap_text_start = .;					\
--		*(.idmap.text)						\
-+		KEEP(*(.idmap.text))					\
- 		__idmap_text_end = .;					\
- 		. = ALIGN(PAGE_SIZE);					\
- 		__hyp_idmap_text_start = .;				\
--		*(.hyp.idmap.text)					\
-+		KEEP(*(.hyp.idmap.text))				\
- 		__hyp_idmap_text_end = .;
- 
- #define ARM_DISCARD							\
-@@ -86,12 +86,12 @@
- 	. = ALIGN(8);							\
- 	.ARM.unwind_idx : {						\
- 		__start_unwind_idx = .;					\
--		*(.ARM.exidx*)						\
-+		KEEP(*(.ARM.exidx*))					\
- 		__stop_unwind_idx = .;					\
- 	}								\
- 	.ARM.unwind_tab : {						\
- 		__start_unwind_tab = .;					\
--		*(.ARM.extab*)						\
-+		KEEP(*(.ARM.extab*))					\
- 		__stop_unwind_tab = .;					\
- 	}
- 
-@@ -102,14 +102,14 @@
- #define ARM_VECTORS							\
- 	__vectors_start = .;						\
- 	.vectors 0xffff0000 : AT(__vectors_start) {			\
--		*(.vectors)						\
-+		KEEP(*(.vectors))					\
- 	}								\
- 	. = __vectors_start + SIZEOF(.vectors);				\
- 	__vectors_end = .;						\
- 									\
- 	__stubs_start = .;						\
- 	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {		\
--		*(.stubs)						\
-+		KEEP(*(.stubs))						\
- 	}								\
- 	. = __stubs_start + SIZEOF(.stubs);				\
- 	__stubs_end = .;						\
diff --git a/target/linux/generic/hack-5.4/221-module_exports.patch b/target/linux/generic/hack-5.4/221-module_exports.patch
deleted file mode 100644
index 47f40ac5e1..0000000000
--- a/target/linux/generic/hack-5.4/221-module_exports.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From b14784e7883390c20ed3ff904892255404a5914b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:05:53 +0200
-Subject: add an optional config option for stripping all unnecessary symbol exports from the kernel image
-
-lede-commit: bb5a40c64b7c4f4848509fa0a6625055fc9e66cc
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/asm-generic/vmlinux.lds.h | 18 +++++++++++++++---
- include/linux/export.h            |  9 ++++++++-
- scripts/Makefile.build            |  2 +-
- 3 files changed, 24 insertions(+), 5 deletions(-)
-
---- a/include/asm-generic/vmlinux.lds.h
-+++ b/include/asm-generic/vmlinux.lds.h
-@@ -54,6 +54,16 @@
- #define LOAD_OFFSET 0
- #endif
- 
-+#ifndef SYMTAB_KEEP
-+#define SYMTAB_KEEP KEEP(*(SORT(___ksymtab+*)))
-+#define SYMTAB_KEEP_GPL KEEP(*(SORT(___ksymtab_gpl+*)))
-+#endif
-+
-+#ifndef SYMTAB_DISCARD
-+#define SYMTAB_DISCARD
-+#define SYMTAB_DISCARD_GPL
-+#endif
-+
- /* Align . to a 8 byte boundary equals to maximum function alignment. */
- #define ALIGN_FUNCTION()  . = ALIGN(8)
- 
-@@ -407,14 +417,14 @@
- 	/* Kernel symbol table: Normal symbols */			\
- 	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
- 		__start___ksymtab = .;					\
--		KEEP(*(SORT(___ksymtab+*)))				\
-+		SYMTAB_KEEP						\
- 		__stop___ksymtab = .;					\
- 	}								\
- 									\
- 	/* Kernel symbol table: GPL-only symbols */			\
- 	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
- 		__start___ksymtab_gpl = .;				\
--		KEEP(*(SORT(___ksymtab_gpl+*)))				\
-+		SYMTAB_KEEP_GPL						\
- 		__stop___ksymtab_gpl = .;				\
- 	}								\
- 									\
-@@ -476,7 +486,7 @@
- 									\
- 	/* Kernel symbol table: strings */				\
-         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
--		*(__ksymtab_strings)					\
-+		*(__ksymtab_strings+*)					\
- 	}								\
- 									\
- 	/* __*init sections */						\
-@@ -905,6 +915,8 @@
- 	EXIT_TEXT							\
- 	EXIT_DATA							\
- 	EXIT_CALL							\
-+	SYMTAB_DISCARD							\
-+	SYMTAB_DISCARD_GPL						\
- 	*(.discard)							\
- 	*(.discard.*)							\
- 	*(.modinfo)							\
---- a/include/linux/export.h
-+++ b/include/linux/export.h
-@@ -98,18 +98,26 @@ struct kernel_symbol {
- 
- #else
- 
-+#ifdef MODULE
-+#define __EXPORT_SUFFIX(sym)
-+#else
-+#define __EXPORT_SUFFIX(sym) "+" #sym
-+#endif
-+
- #define ___export_symbol_common(sym, sec)				\
- 	extern typeof(sym) sym;						\
- 	__CRC_SYMBOL(sym, sec);						\
- 	static const char __kstrtab_##sym[]				\
--	__attribute__((section("__ksymtab_strings"), used, aligned(1)))	\
-+	__attribute__((section("__ksymtab_strings"			\
-+	  __EXPORT_SUFFIX(sym)), used, aligned(1)))			\
- 	= #sym								\
- 
- /* For every exported symbol, place a struct in the __ksymtab section */
- #define ___EXPORT_SYMBOL_NS(sym, sec, ns)				\
- 	___export_symbol_common(sym, sec);				\
- 	static const char __kstrtabns_##sym[]				\
--	__attribute__((section("__ksymtab_strings"), used, aligned(1)))	\
-+	__attribute__((section("__ksymtab_strings"			\
-+	  __EXPORT_SUFFIX(sym)), used, aligned(1)))			\
- 	= #ns;								\
- 	__KSYMTAB_ENTRY_NS(sym, sec)
- 
---- a/scripts/Makefile.build
-+++ b/scripts/Makefile.build
-@@ -350,7 +350,7 @@ targets += $(extra-y) $(MAKECMDGOALS) $(
- # Linker scripts preprocessor (.lds.S -> .lds)
- # ---------------------------------------------------------------------------
- quiet_cmd_cpp_lds_S = LDS     $@
--      cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \
-+      cmd_cpp_lds_S = $(CPP) $(EXTRA_LDSFLAGS) $(cpp_flags) -P -U$(ARCH) \
- 	                     -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
- 
- $(obj)/%.lds: $(src)/%.lds.S FORCE
diff --git a/target/linux/generic/hack-5.4/230-openwrt_lzma_options.patch b/target/linux/generic/hack-5.4/230-openwrt_lzma_options.patch
deleted file mode 100644
index 809ccbc1e5..0000000000
--- a/target/linux/generic/hack-5.4/230-openwrt_lzma_options.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From b3d00b452467f621317953d9e4c6f9ae8dcfd271 Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Fri, 7 Jul 2017 17:06:55 +0200
-Subject: use the openwrt lzma options for now
-
-lede-commit: 548de949f392049420a6a1feeef118b30ab8ea8c
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- lib/decompress.c              |  1 +
- scripts/Makefile.lib          |  2 +-
- usr/gen_initramfs_list.sh | 10 +++++-----
- 3 files changed, 7 insertions(+), 6 deletions(-)
-
---- a/lib/decompress.c
-+++ b/lib/decompress.c
-@@ -49,6 +49,7 @@ static const struct compress_format comp
- 	{ {0x1f, 0x9e}, "gzip", gunzip },
- 	{ {0x42, 0x5a}, "bzip2", bunzip2 },
- 	{ {0x5d, 0x00}, "lzma", unlzma },
-+	{ {0x6d, 0x00}, "lzma-openwrt", unlzma },
- 	{ {0xfd, 0x37}, "xz", unxz },
- 	{ {0x89, 0x4c}, "lzo", unlzo },
- 	{ {0x02, 0x21}, "lz4", unlz4 },
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -328,7 +328,7 @@ quiet_cmd_bzip2 = BZIP2   $@
- # ---------------------------------------------------------------------------
- 
- quiet_cmd_lzma = LZMA    $@
--      cmd_lzma = { cat $(real-prereqs) | $(LZMA) -9; $(size_append); } > $@
-+      cmd_lzma = { cat $(real-prereqs) | $(LZMA) e -d20 -lc1 -lp2 -pb2 -eos -si -so; $(size_append); } > $@
- 
- quiet_cmd_lzo = LZO     $@
-       cmd_lzo = { cat $(real-prereqs) | $(KLZOP) -9; $(size_append); } > $@
---- a/usr/gen_initramfs_list.sh
-+++ b/usr/gen_initramfs_list.sh
-@@ -229,7 +229,7 @@ cpio_list=
- output="/dev/stdout"
- output_file=""
- is_cpio_compressed=
--compr="gzip -n -9 -f"
-+compr="gzip -n -9 -f -"
- 
- arg="$1"
- case "$arg" in
-@@ -245,13 +245,13 @@ case "$arg" in
- 		output=${cpio_list}
- 		echo "$output_file" | grep -q "\.gz$" \
-                 && [ -x "`which gzip 2> /dev/null`" ] \
--                && compr="gzip -n -9 -f"
-+                && compr="gzip -n -9 -f -"
- 		echo "$output_file" | grep -q "\.bz2$" \
-                 && [ -x "`which bzip2 2> /dev/null`" ] \
--                && compr="bzip2 -9 -f"
-+                && compr="bzip2 -9 -f -"
- 		echo "$output_file" | grep -q "\.lzma$" \
-                 && [ -x "`which lzma 2> /dev/null`" ] \
--                && compr="lzma -9 -f"
-+                && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so"
- 		echo "$output_file" | grep -q "\.xz$" \
-                 && [ -x "`which xz 2> /dev/null`" ] \
-                 && compr="xz --check=crc32 --lzma2=dict=1MiB"
-@@ -320,7 +320,7 @@ if [ ! -z ${output_file} ]; then
- 	if [ "${is_cpio_compressed}" = "compressed" ]; then
- 		cat ${cpio_tfile} > ${output_file}
- 	else
--		(cat ${cpio_tfile} | ${compr}  - > ${output_file}) \
-+		(cat ${cpio_tfile} | ${compr} > ${output_file}) \
- 		|| (rm -f ${output_file} ; false)
- 	fi
- 	[ -z ${cpio_file} ] && rm ${cpio_tfile}
diff --git a/target/linux/generic/hack-5.4/249-udp-tunnel-selection.patch b/target/linux/generic/hack-5.4/249-udp-tunnel-selection.patch
deleted file mode 100644
index 2c74298dfe..0000000000
--- a/target/linux/generic/hack-5.4/249-udp-tunnel-selection.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/net/ipv4/Kconfig
-+++ b/net/ipv4/Kconfig
-@@ -315,7 +315,7 @@ config NET_IPVTI
- 	  on top.
- 
- config NET_UDP_TUNNEL
--	tristate
-+	tristate "IP: UDP tunneling support"
- 	select NET_IP_TUNNEL
- 	default n
- 
diff --git a/target/linux/generic/hack-5.4/250-netfilter_depends.patch b/target/linux/generic/hack-5.4/250-netfilter_depends.patch
deleted file mode 100644
index d03cb53180..0000000000
--- a/target/linux/generic/hack-5.4/250-netfilter_depends.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: hack: net: remove bogus netfilter dependencies
-
-lede-commit: 589d2a377dee27d206fc3725325309cf649e4df6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/Kconfig | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -228,7 +228,6 @@ config NF_CONNTRACK_FTP
- 
- config NF_CONNTRACK_H323
- 	tristate "H.323 protocol support"
--	depends on IPV6 || IPV6=n
- 	depends on NETFILTER_ADVANCED
- 	help
- 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
-@@ -1088,7 +1087,6 @@ config NETFILTER_XT_TARGET_SECMARK
- 
- config NETFILTER_XT_TARGET_TCPMSS
- 	tristate '"TCPMSS" target support'
--	depends on IPV6 || IPV6=n
- 	default m if NETFILTER_ADVANCED=n
- 	---help---
- 	  This option adds a `TCPMSS' target, which allows you to alter the
diff --git a/target/linux/generic/hack-5.4/251-sound_kconfig.patch b/target/linux/generic/hack-5.4/251-sound_kconfig.patch
deleted file mode 100644
index f593417c9d..0000000000
--- a/target/linux/generic/hack-5.4/251-sound_kconfig.patch
+++ /dev/null
@@ -1,199 +0,0 @@
-From da3c50704f14132f4adf80d48e9a4cd5d46e54c9 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Fri, 7 Jul 2017 17:09:21 +0200
-Subject: kconfig: owrt specifc dependencies
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- crypto/Kconfig        | 10 +++++-----
- drivers/bcma/Kconfig  |  1 +
- drivers/ssb/Kconfig   |  3 ++-
- lib/Kconfig           |  8 ++++----
- net/netfilter/Kconfig |  2 +-
- net/wireless/Kconfig  | 17 ++++++++++-------
- sound/core/Kconfig    |  4 ++--
- 7 files changed, 25 insertions(+), 20 deletions(-)
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -33,7 +33,7 @@ config CRYPTO_FIPS
- 	  this is.
- 
- config CRYPTO_ALGAPI
--	tristate
-+	tristate "ALGAPI"
- 	select CRYPTO_ALGAPI2
- 	help
- 	  This option provides the API for cryptographic algorithms.
-@@ -42,7 +42,7 @@ config CRYPTO_ALGAPI2
- 	tristate
- 
- config CRYPTO_AEAD
--	tristate
-+	tristate "AEAD"
- 	select CRYPTO_AEAD2
- 	select CRYPTO_ALGAPI
- 
-@@ -53,7 +53,7 @@ config CRYPTO_AEAD2
- 	select CRYPTO_RNG2
- 
- config CRYPTO_BLKCIPHER
--	tristate
-+	tristate "BLKCIPHER"
- 	select CRYPTO_BLKCIPHER2
- 	select CRYPTO_ALGAPI
- 
-@@ -63,7 +63,7 @@ config CRYPTO_BLKCIPHER2
- 	select CRYPTO_RNG2
- 
- config CRYPTO_HASH
--	tristate
-+	tristate "HASH"
- 	select CRYPTO_HASH2
- 	select CRYPTO_ALGAPI
- 
-@@ -72,7 +72,7 @@ config CRYPTO_HASH2
- 	select CRYPTO_ALGAPI2
- 
- config CRYPTO_RNG
--	tristate
-+	tristate "RNG"
- 	select CRYPTO_RNG2
- 	select CRYPTO_ALGAPI
- 
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -16,6 +16,7 @@ if BCMA
- # Support for Block-I/O. SELECT this from the driver that needs it.
- config BCMA_BLOCKIO
- 	bool
-+	default y
- 
- config BCMA_HOST_PCI_POSSIBLE
- 	bool
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -29,6 +29,7 @@ config SSB_SPROM
- config SSB_BLOCKIO
- 	bool
- 	depends on SSB
-+	default y
- 
- config SSB_PCIHOST_POSSIBLE
- 	bool
-@@ -49,7 +50,7 @@ config SSB_PCIHOST
- config SSB_B43_PCI_BRIDGE
- 	bool
- 	depends on SSB_PCIHOST
--	default n
-+	default y
- 
- config SSB_PCMCIAHOST_POSSIBLE
- 	bool
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -402,16 +402,16 @@ config BCH_CONST_T
- # Textsearch support is select'ed if needed
- #
- config TEXTSEARCH
--	bool
-+	bool "Textsearch support"
- 
- config TEXTSEARCH_KMP
--	tristate
-+	tristate "Textsearch KMP"
- 
- config TEXTSEARCH_BM
--	tristate
-+	tristate "Textsearch BM"
- 
- config TEXTSEARCH_FSM
--	tristate
-+	tristate "Textsearch FSM"
- 
- config BTREE
- 	bool
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -11,7 +11,7 @@ config NETFILTER_INGRESS
- 	  infrastructure.
- 
- config NETFILTER_NETLINK
--	tristate
-+	tristate "Netfilter NFNETLINK interface"
- 
- config NETFILTER_FAMILY_BRIDGE
- 	bool
---- a/net/wireless/Kconfig
-+++ b/net/wireless/Kconfig
-@@ -1,6 +1,6 @@
- # SPDX-License-Identifier: GPL-2.0-only
- config WIRELESS_EXT
--	bool
-+	bool "Wireless extensions"
- 
- config WEXT_CORE
- 	def_bool y
-@@ -12,10 +12,10 @@ config WEXT_PROC
- 	depends on WEXT_CORE
- 
- config WEXT_SPY
--	bool
-+	bool "WEXT_SPY"
- 
- config WEXT_PRIV
--	bool
-+	bool "WEXT_PRIV"
- 
- config CFG80211
- 	tristate "cfg80211 - wireless configuration API"
-@@ -203,7 +203,7 @@ config CFG80211_WEXT_EXPORT
- endif # CFG80211
- 
- config LIB80211
--	tristate
-+	tristate "LIB80211"
- 	default n
- 	help
- 	  This options enables a library of common routines used
-@@ -212,17 +212,17 @@ config LIB80211
- 	  Drivers should select this themselves if needed.
- 
- config LIB80211_CRYPT_WEP
--	tristate
-+	tristate "LIB80211_CRYPT_WEP"
- 	select CRYPTO_LIB_ARC4
- 
- config LIB80211_CRYPT_CCMP
--	tristate
-+	tristate "LIB80211_CRYPT_CCMP"
- 	select CRYPTO
- 	select CRYPTO_AES
- 	select CRYPTO_CCM
- 
- config LIB80211_CRYPT_TKIP
--	tristate
-+	tristate "LIB80211_CRYPT_TKIP"
- 	select CRYPTO_LIB_ARC4
- 
- config LIB80211_DEBUG
---- a/sound/core/Kconfig
-+++ b/sound/core/Kconfig
-@@ -17,7 +17,7 @@ config SND_DMAENGINE_PCM
- 	tristate
- 
- config SND_HWDEP
--	tristate
-+	tristate "Sound hardware support"
- 
- config SND_SEQ_DEVICE
- 	tristate
-@@ -27,7 +27,7 @@ config SND_RAWMIDI
- 	select SND_SEQ_DEVICE if SND_SEQUENCER != n
- 
- config SND_COMPRESS_OFFLOAD
--	tristate
-+	tristate "Compression offloading support"
- 
- config SND_JACK
- 	bool
diff --git a/target/linux/generic/hack-5.4/259-regmap_dynamic.patch b/target/linux/generic/hack-5.4/259-regmap_dynamic.patch
deleted file mode 100644
index 812e182467..0000000000
--- a/target/linux/generic/hack-5.4/259-regmap_dynamic.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From 811d9e2268a62b830cfe93cd8bc929afcb8b198b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 21:12:38 +0200
-Subject: kernel: move regmap bloat out of the kernel image if it is only being used in modules
-
-lede-commit: 96f39119815028073583e4fca3a9c5fe9141e998
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/base/regmap/Kconfig  | 15 ++++++++++-----
- drivers/base/regmap/Makefile | 12 ++++++++----
- drivers/base/regmap/regmap.c |  3 +++
- include/linux/regmap.h       |  2 +-
- 4 files changed, 22 insertions(+), 10 deletions(-)
-
---- a/drivers/base/regmap/Kconfig
-+++ b/drivers/base/regmap/Kconfig
-@@ -4,9 +4,8 @@
- # subsystems should select the appropriate symbols.
- 
- config REGMAP
--	default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ || REGMAP_SCCB || REGMAP_I3C)
- 	select IRQ_DOMAIN if REGMAP_IRQ
--	bool
-+	tristate
- 
- config REGCACHE_COMPRESSED
- 	select LZO_COMPRESS
-@@ -18,38 +17,49 @@ config REGMAP_AC97
- 
- config REGMAP_I2C
- 	tristate
-+	select REGMAP
- 	depends on I2C
- 
- config REGMAP_SLIMBUS
- 	tristate
-+	select REGMAP
- 	depends on SLIMBUS
- 
- config REGMAP_SPI
- 	tristate
-+	select REGMAP
-+	depends on SPI_MASTER
- 	depends on SPI
- 
- config REGMAP_SPMI
- 	tristate
-+	select REGMAP
- 	depends on SPMI
- 
- config REGMAP_W1
- 	tristate
-+	select REGMAP
- 	depends on W1
- 
- config REGMAP_MMIO
- 	tristate
-+	select REGMAP
- 
- config REGMAP_IRQ
- 	bool
-+	select REGMAP
- 
- config REGMAP_SOUNDWIRE
- 	tristate
-+	select REGMAP
- 	depends on SOUNDWIRE
- 
- config REGMAP_SCCB
- 	tristate
-+	select REGMAP
- 	depends on I2C
- 
- config REGMAP_I3C
- 	tristate
-+	select REGMAP
- 	depends on I3C
---- a/drivers/base/regmap/Makefile
-+++ b/drivers/base/regmap/Makefile
-@@ -2,10 +2,14 @@
- # For include/trace/define_trace.h to include trace.h
- CFLAGS_regmap.o := -I$(src)
- 
--obj-$(CONFIG_REGMAP) += regmap.o regcache.o
--obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-flat.o
--obj-$(CONFIG_REGCACHE_COMPRESSED) += regcache-lzo.o
--obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
-+regmap-core-objs = regmap.o regcache.o regcache-rbtree.o regcache-flat.o
-+ifdef CONFIG_DEBUG_FS
-+regmap-core-objs += regmap-debugfs.o
-+endif
-+ifdef CONFIG_REGCACHE_COMPRESSED
-+regmap-core-objs += regcache-lzo.o
-+endif
-+obj-$(CONFIG_REGMAP) += regmap-core.o
- obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o
- obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
- obj-$(CONFIG_REGMAP_SLIMBUS) += regmap-slimbus.o
---- a/drivers/base/regmap/regmap.c
-+++ b/drivers/base/regmap/regmap.c
-@@ -9,6 +9,7 @@
- #include <linux/device.h>
- #include <linux/slab.h>
- #include <linux/export.h>
-+#include <linux/module.h>
- #include <linux/mutex.h>
- #include <linux/err.h>
- #include <linux/of.h>
-@@ -3118,3 +3119,5 @@ static int __init regmap_initcall(void)
- 	return 0;
- }
- postcore_initcall(regmap_initcall);
-+
-+MODULE_LICENSE("GPL");
---- a/include/linux/regmap.h
-+++ b/include/linux/regmap.h
-@@ -185,7 +185,7 @@ struct reg_sequence {
- 	pollret ?: ((cond) ? 0 : -ETIMEDOUT); \
- })
- 
--#ifdef CONFIG_REGMAP
-+#if IS_REACHABLE(CONFIG_REGMAP)
- 
- enum regmap_endian {
- 	/* Unspecified -> 0 -> Backwards compatible default */
diff --git a/target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch b/target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch
deleted file mode 100644
index c1b0b8551e..0000000000
--- a/target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From fd1799b0bf5efa46dd3e6dfbbf3955564807e508 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:12:51 +0200
-Subject: kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run
-
-Reduces kernel size after LZMA by about 5k on MIPS
-
-lede-commit: 044c316167e076479a344c59905e5b435b84a77f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- crypto/Kconfig   | 13 ++++++-------
- crypto/algboss.c |  4 ++++
- 2 files changed, 10 insertions(+), 7 deletions(-)
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -120,13 +120,13 @@ config CRYPTO_MANAGER
- 	  cbc(aes).
- 
- config CRYPTO_MANAGER2
--	def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
--	select CRYPTO_AEAD2
--	select CRYPTO_HASH2
--	select CRYPTO_BLKCIPHER2
--	select CRYPTO_AKCIPHER2
--	select CRYPTO_KPP2
--	select CRYPTO_ACOMP2
-+	def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y && !CRYPTO_MANAGER_DISABLE_TESTS)
-+	select CRYPTO_AEAD2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_HASH2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_BLKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_AKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_KPP2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_ACOMP2 if !CRYPTO_MANAGER_DISABLE_TESTS
- 
- config CRYPTO_USER
- 	tristate "Userspace cryptographic algorithm configuration"
---- a/crypto/algboss.c
-+++ b/crypto/algboss.c
-@@ -240,8 +240,12 @@ static int cryptomgr_schedule_test(struc
- 	type = alg->cra_flags;
- 
- 	/* Do not test internal algorithms. */
-+#ifdef CONFIG_CRYPTO_MANAGER_DISABLE_TESTS
-+	type |= CRYPTO_ALG_TESTED;
-+#else
- 	if (type & CRYPTO_ALG_INTERNAL)
- 		type |= CRYPTO_ALG_TESTED;
-+#endif
- 
- 	param->type = type;
- 
diff --git a/target/linux/generic/hack-5.4/260-lib-arc4-unhide.patch b/target/linux/generic/hack-5.4/260-lib-arc4-unhide.patch
deleted file mode 100644
index a7668acfad..0000000000
--- a/target/linux/generic/hack-5.4/260-lib-arc4-unhide.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-This makes it possible to select CONFIG_CRYPTO_LIB_ARC4 directly. We 
-need this to be able to compile this into the kernel and make use of it 
-from backports.
-
---- a/lib/crypto/Kconfig
-+++ b/lib/crypto/Kconfig
-@@ -6,7 +6,7 @@ config CRYPTO_LIB_AES
- 	tristate
- 
- config CRYPTO_LIB_ARC4
--	tristate
-+	tristate "ARC4 cipher library"
- 
- config CRYPTO_ARCH_HAVE_LIB_BLAKE2S
- 	tristate
diff --git a/target/linux/generic/hack-5.4/280-rfkill-stubs.patch b/target/linux/generic/hack-5.4/280-rfkill-stubs.patch
deleted file mode 100644
index 2e48aea1cf..0000000000
--- a/target/linux/generic/hack-5.4/280-rfkill-stubs.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 236c1acdfef5958010ac9814a9872e0a46fd78ee Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Fri, 7 Jul 2017 17:13:44 +0200
-Subject: rfkill: add fake rfkill support
-
-allow building of modules depending on RFKILL even if RFKILL is not enabled.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- include/linux/rfkill.h |  2 +-
- net/Makefile           |  2 +-
- net/rfkill/Kconfig     | 14 +++++++++-----
- net/rfkill/Makefile    |  2 +-
- 4 files changed, 12 insertions(+), 8 deletions(-)
-
---- a/include/linux/rfkill.h
-+++ b/include/linux/rfkill.h
-@@ -64,7 +64,7 @@ struct rfkill_ops {
- 	int	(*set_block)(void *data, bool blocked);
- };
- 
--#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-+#if defined(CONFIG_RFKILL_FULL) || defined(CONFIG_RFKILL_FULL_MODULE)
- /**
-  * rfkill_alloc - Allocate rfkill structure
-  * @name: name of the struct -- the string is not copied internally
---- a/net/Makefile
-+++ b/net/Makefile
-@@ -53,7 +53,7 @@ obj-$(CONFIG_TIPC)		+= tipc/
- obj-$(CONFIG_NETLABEL)		+= netlabel/
- obj-$(CONFIG_IUCV)		+= iucv/
- obj-$(CONFIG_SMC)		+= smc/
--obj-$(CONFIG_RFKILL)		+= rfkill/
-+obj-$(CONFIG_RFKILL_FULL)	+= rfkill/
- obj-$(CONFIG_NET_9P)		+= 9p/
- obj-$(CONFIG_CAIF)		+= caif/
- ifneq ($(CONFIG_DCB),)
---- a/net/rfkill/Kconfig
-+++ b/net/rfkill/Kconfig
-@@ -2,7 +2,11 @@
- #
- # RF switch subsystem configuration
- #
--menuconfig RFKILL
-+config RFKILL
-+	bool
-+	default y
-+
-+menuconfig RFKILL_FULL
- 	tristate "RF switch subsystem support"
- 	help
- 	  Say Y here if you want to have control over RF switches
-@@ -14,19 +18,19 @@ menuconfig RFKILL
- # LED trigger support
- config RFKILL_LEDS
- 	bool
--	depends on RFKILL
-+	depends on RFKILL_FULL
- 	depends on LEDS_TRIGGERS = y || RFKILL = LEDS_TRIGGERS
- 	default y
- 
- config RFKILL_INPUT
- 	bool "RF switch input support" if EXPERT
--	depends on RFKILL
-+	depends on RFKILL_FULL
- 	depends on INPUT = y || RFKILL = INPUT
- 	default y if !EXPERT
- 
- config RFKILL_GPIO
- 	tristate "GPIO RFKILL driver"
--	depends on RFKILL
-+	depends on RFKILL_FULL
- 	depends on GPIOLIB || COMPILE_TEST
- 	default n
- 	help
---- a/net/rfkill/Makefile
-+++ b/net/rfkill/Makefile
-@@ -5,5 +5,5 @@
- 
- rfkill-y			+= core.o
- rfkill-$(CONFIG_RFKILL_INPUT)	+= input.o
--obj-$(CONFIG_RFKILL)		+= rfkill.o
-+obj-$(CONFIG_RFKILL_FULL)	+= rfkill.o
- obj-$(CONFIG_RFKILL_GPIO)	+= rfkill-gpio.o
diff --git a/target/linux/generic/hack-5.4/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch b/target/linux/generic/hack-5.4/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch
deleted file mode 100644
index aed08a5ec9..0000000000
--- a/target/linux/generic/hack-5.4/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From: Ben Menchaca <ben.menchaca@qca.qualcomm.com>
-Date: Fri, 7 Jun 2013 18:35:22 -0500
-Subject: MIPS: r4k_cache: use more efficient cache blast
-
-Optimize the compiler output for larger cache blast cases that are
-common for DMA-based networking.
-
-Signed-off-by: Ben Menchaca <ben.menchaca@qca.qualcomm.com>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -617,14 +617,46 @@ static inline void prot##extra##blast_##
- 						    unsigned long end)	\
- {									\
- 	unsigned long lsize = cpu_##desc##_line_size();			\
-+	unsigned long lsize_2 = lsize * 2;				\
-+	unsigned long lsize_3 = lsize * 3;				\
-+	unsigned long lsize_4 = lsize * 4;				\
-+	unsigned long lsize_5 = lsize * 5;				\
-+	unsigned long lsize_6 = lsize * 6;				\
-+	unsigned long lsize_7 = lsize * 7;				\
-+	unsigned long lsize_8 = lsize * 8;				\
- 	unsigned long addr = start & ~(lsize - 1);			\
--	unsigned long aend = (end - 1) & ~(lsize - 1);			\
-+	unsigned long aend = (end + lsize - 1) & ~(lsize - 1);		\
-+	int lines = (aend - addr) / lsize;				\
- 									\
--	while (1) {							\
-+	while (lines >= 8) {						\
-+		prot##cache_op(hitop, addr);				\
-+		prot##cache_op(hitop, addr + lsize);			\
-+		prot##cache_op(hitop, addr + lsize_2);			\
-+		prot##cache_op(hitop, addr + lsize_3);			\
-+		prot##cache_op(hitop, addr + lsize_4);			\
-+		prot##cache_op(hitop, addr + lsize_5);			\
-+		prot##cache_op(hitop, addr + lsize_6);			\
-+		prot##cache_op(hitop, addr + lsize_7);			\
-+		addr += lsize_8;					\
-+		lines -= 8;						\
-+	}								\
-+									\
-+	if (lines & 0x4) {						\
-+		prot##cache_op(hitop, addr);				\
-+		prot##cache_op(hitop, addr + lsize);			\
-+		prot##cache_op(hitop, addr + lsize_2);			\
-+		prot##cache_op(hitop, addr + lsize_3);			\
-+		addr += lsize_4;					\
-+	}								\
-+									\
-+	if (lines & 0x2) {						\
-+		prot##cache_op(hitop, addr);				\
-+		prot##cache_op(hitop, addr + lsize);			\
-+		addr += lsize_2;					\
-+	}								\
-+									\
-+	if (lines & 0x1) {						\
- 		prot##cache_op(hitop, addr);				\
--		if (addr == aend)					\
--			break;						\
--		addr += lsize;						\
- 	}								\
- }
- 
diff --git a/target/linux/generic/hack-5.4/301-mips_image_cmdline_hack.patch b/target/linux/generic/hack-5.4/301-mips_image_cmdline_hack.patch
deleted file mode 100644
index ddae75f614..0000000000
--- a/target/linux/generic/hack-5.4/301-mips_image_cmdline_hack.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: John Crispin <john@phrozen.org>
-Subject: hack: kernel: add generic image_cmdline hack to MIPS targets
-
-lede-commit: d59f5b3a987a48508257a0ddbaeadc7909f9f976
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/Kconfig       | 4 ++++
- arch/mips/kernel/head.S | 6 ++++++
- 2 files changed, 10 insertions(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1164,6 +1164,10 @@ config SYNC_R4K
- config MIPS_MACHINE
- 	def_bool n
- 
-+config IMAGE_CMDLINE_HACK
-+	bool "OpenWrt specific image command line hack"
-+	default n
-+
- config NO_IOPORT_MAP
- 	def_bool n
- 
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -79,6 +79,12 @@ FEXPORT(__kernel_entry)
- 	j	kernel_entry
- #endif /* CONFIG_BOOT_RAW */
- 
-+#ifdef CONFIG_IMAGE_CMDLINE_HACK
-+	.ascii	"CMDLINE:"
-+EXPORT(__image_cmdline)
-+	.fill	0x400
-+#endif /* CONFIG_IMAGE_CMDLINE_HACK */
-+
- 	__REF
- 
- NESTED(kernel_entry, 16, sp)			# kernel entry point
diff --git a/target/linux/generic/hack-5.4/321-powerpc_crtsavres_prereq.patch b/target/linux/generic/hack-5.4/321-powerpc_crtsavres_prereq.patch
deleted file mode 100644
index 8591705eae..0000000000
--- a/target/linux/generic/hack-5.4/321-powerpc_crtsavres_prereq.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 107c0964cb8db7ca28ac5199426414fdab3c274d Mon Sep 17 00:00:00 2001
-From: "Alexandros C. Couloumbis" <alex@ozo.com>
-Date: Fri, 7 Jul 2017 17:14:51 +0200
-Subject: hack: arch: powerpc: drop register save/restore library from modules
-
-Upstream GCC uses a libgcc function for saving/restoring registers. This
-makes the code bigger, and upstream kernels need to carry that function
-for every single kernel module. Our GCC is patched to avoid those
-references, so we can drop the extra bloat for modules.
-
-lede-commit: e8e1084654f50904e6bf77b70b2de3f137d7b3ec
-Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
----
- arch/powerpc/Makefile | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/powerpc/Makefile
-+++ b/arch/powerpc/Makefile
-@@ -61,20 +61,6 @@ machine-$(CONFIG_PPC64) += 64
- machine-$(CONFIG_CPU_LITTLE_ENDIAN) += le
- UTS_MACHINE := $(subst $(space),,$(machine-y))
- 
--# XXX This needs to be before we override LD below
--ifdef CONFIG_PPC32
--KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
--else
--KBUILD_LDS_MODULE += $(srctree)/arch/powerpc/kernel/module.lds
--ifeq ($(call ld-ifversion, -ge, 225000000, y),y)
--# Have the linker provide sfpr if possible.
--# There is a corresponding test in arch/powerpc/lib/Makefile
--KBUILD_LDFLAGS_MODULE += --save-restore-funcs
--else
--KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
--endif
--endif
--
- ifdef CONFIG_CPU_LITTLE_ENDIAN
- KBUILD_CFLAGS	+= -mlittle-endian
- KBUILD_LDFLAGS	+= -EL
diff --git a/target/linux/generic/hack-5.4/400-block-fit-partition-parser.patch b/target/linux/generic/hack-5.4/400-block-fit-partition-parser.patch
deleted file mode 100644
index 6b3267ef80..0000000000
--- a/target/linux/generic/hack-5.4/400-block-fit-partition-parser.patch
+++ /dev/null
@@ -1,176 +0,0 @@
---- a/block/partitions/Kconfig
-+++ b/block/partitions/Kconfig
-@@ -101,6 +101,13 @@ config ATARI_PARTITION
- 	  Say Y here if you would like to use hard disks under Linux which
- 	  were partitioned under the Atari OS.
- 
-+config FIT_PARTITION
-+	bool "Flattened-Image-Tree (FIT) partition support" if PARTITION_ADVANCED
-+	default n
-+	help
-+	  Say Y here if your system needs to mount the filesystem part of
-+	  a Flattened-Image-Tree (FIT) image commonly used with Das U-Boot.
-+
- config IBM_PARTITION
- 	bool "IBM disk label and partition support"
- 	depends on PARTITION_ADVANCED && S390
---- a/block/partitions/Makefile
-+++ b/block/partitions/Makefile
-@@ -9,6 +9,7 @@ obj-$(CONFIG_ACORN_PARTITION) += acorn.o
- obj-$(CONFIG_AMIGA_PARTITION) += amiga.o
- obj-$(CONFIG_ATARI_PARTITION) += atari.o
- obj-$(CONFIG_AIX_PARTITION) += aix.o
-+obj-$(CONFIG_FIT_PARTITION) += fit.o
- obj-$(CONFIG_CMDLINE_PARTITION) += cmdline.o
- obj-$(CONFIG_MAC_PARTITION) += mac.o
- obj-$(CONFIG_LDM_PARTITION) += ldm.o
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -396,7 +396,7 @@ int ubiblock_create(struct ubi_volume_in
- 	dev->leb_size = vi->usable_leb_size;
- 
- 	/* Initialize the gendisk of this ubiblock device */
--	gd = alloc_disk(1);
-+	gd = alloc_disk(0);
- 	if (!gd) {
- 		pr_err("UBI: block: alloc_disk failed\n");
- 		ret = -ENODEV;
-@@ -413,6 +413,7 @@ int ubiblock_create(struct ubi_volume_in
- 		goto out_put_disk;
- 	}
- 	gd->private_data = dev;
-+	gd->flags |= GENHD_FL_EXT_DEVT;
- 	sprintf(gd->disk_name, "ubiblock%d_%d", dev->ubi_num, dev->vol_id);
- 	set_capacity(gd, disk_capacity);
- 	dev->gd = gd;
---- a/block/partition-generic.c
-+++ b/block/partition-generic.c
-@@ -18,6 +18,10 @@
- #include <linux/ctype.h>
- #include <linux/genhd.h>
- #include <linux/blktrace_api.h>
-+#ifdef CONFIG_FIT_PARTITION
-+#include <linux/root_dev.h>
-+#endif
-+
- 
- #include "partitions/check.h"
- 
-@@ -180,6 +184,18 @@ ssize_t part_fail_store(struct device *d
- }
- #endif
- 
-+static ssize_t part_name_show(struct device *dev,
-+			      struct device_attribute *attr, char *buf)
-+{
-+	struct hd_struct *p = dev_to_part(dev);
-+
-+	if (p->info && p->info->volname)
-+		return sprintf(buf, "%s\n", p->info->volname);
-+
-+	buf[0] = '\0';
-+	return 0;
-+}
-+
- static DEVICE_ATTR(partition, 0444, part_partition_show, NULL);
- static DEVICE_ATTR(start, 0444, part_start_show, NULL);
- static DEVICE_ATTR(size, 0444, part_size_show, NULL);
-@@ -188,6 +204,7 @@ static DEVICE_ATTR(alignment_offset, 044
- static DEVICE_ATTR(discard_alignment, 0444, part_discard_alignment_show, NULL);
- static DEVICE_ATTR(stat, 0444, part_stat_show, NULL);
- static DEVICE_ATTR(inflight, 0444, part_inflight_show, NULL);
-+static DEVICE_ATTR(name, 0444, part_name_show, NULL);
- #ifdef CONFIG_FAIL_MAKE_REQUEST
- static struct device_attribute dev_attr_fail =
- 	__ATTR(make-it-fail, 0644, part_fail_show, part_fail_store);
-@@ -202,6 +219,7 @@ static struct attribute *part_attrs[] =
- 	&dev_attr_discard_alignment.attr,
- 	&dev_attr_stat.attr,
- 	&dev_attr_inflight.attr,
-+	&dev_attr_name.attr,
- #ifdef CONFIG_FAIL_MAKE_REQUEST
- 	&dev_attr_fail.attr,
- #endif
-@@ -634,6 +652,10 @@ rescan:
- 		if (state->parts[p].flags & ADDPART_FLAG_RAID)
- 			md_autodetect_dev(part_to_dev(part)->devt);
- #endif
-+#ifdef CONFIG_FIT_PARTITION
-+		if ((state->parts[p].flags & ADDPART_FLAG_ROOTDEV) && ROOT_DEV == 0)
-+			ROOT_DEV = part_to_dev(part)->devt;
-+#endif
- 	}
- 	free_partitions(state);
- 	return 0;
---- a/block/partitions/check.c
-+++ b/block/partitions/check.c
-@@ -33,6 +33,7 @@
- #include "ibm.h"
- #include "ultrix.h"
- #include "efi.h"
-+#include "fit.h"
- #include "karma.h"
- #include "sysv68.h"
- #include "cmdline.h"
-@@ -73,6 +74,9 @@ static int (*check_part[])(struct parsed
- #ifdef CONFIG_EFI_PARTITION
- 	efi_partition,		/* this must come before msdos */
- #endif
-+#ifdef CONFIG_FIT_PARTITION
-+	fit_partition,
-+#endif
- #ifdef CONFIG_SGI_PARTITION
- 	sgi_partition,
- #endif
---- a/include/linux/genhd.h
-+++ b/include/linux/genhd.h
-@@ -614,6 +614,7 @@ struct unixware_disklabel {
- #define ADDPART_FLAG_NONE	0
- #define ADDPART_FLAG_RAID	1
- #define ADDPART_FLAG_WHOLEDISK	2
-+#define ADDPART_FLAG_ROOTDEV	4
- 
- extern int blk_alloc_devt(struct hd_struct *part, dev_t *devt);
- extern void blk_free_devt(dev_t devt);
---- /dev/null
-+++ b/block/partitions/fit.h
-@@ -0,0 +1,3 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+int fit_partition(struct parsed_partitions *);
-+int parse_fit_partitions(struct parsed_partitions *state, u64 start_sector, u64 nr_sectors, int *slot, int add_remain);
---- a/block/partitions/efi.c
-+++ b/block/partitions/efi.c
-@@ -681,6 +681,9 @@ int efi_partition(struct parsed_partitio
- 	gpt_entry *ptes = NULL;
- 	u32 i;
- 	unsigned ssz = bdev_logical_block_size(state->bdev) / 512;
-+#ifdef CONFIG_FIT_PARTITION
-+	u32 extra_slot = 64;
-+#endif
- 
- 	if (!find_valid_gpt(state, &gpt, &ptes) || !gpt || !ptes) {
- 		kfree(gpt);
-@@ -722,6 +725,11 @@ int efi_partition(struct parsed_partitio
- 			label_count++;
- 		}
- 		state->parts[i + 1].has_info = true;
-+#ifdef CONFIG_FIT_PARTITION
-+		/* If this is a U-Boot FIT volume it may have subpartitions */
-+		if (!efi_guidcmp(ptes[i].partition_type_guid, PARTITION_LINUX_FIT_GUID))
-+			(void) parse_fit_partitions(state, start * ssz, size * ssz, &extra_slot, 1);
-+#endif
- 	}
- 	kfree(ptes);
- 	kfree(gpt);
---- a/block/partitions/efi.h
-+++ b/block/partitions/efi.h
-@@ -52,6 +52,9 @@
- #define PARTITION_LINUX_LVM_GUID \
-     EFI_GUID( 0xe6d6d379, 0xf507, 0x44c2, \
-               0xa2, 0x3c, 0x23, 0x8f, 0x2a, 0x3d, 0xf9, 0x28)
-+#define PARTITION_LINUX_FIT_GUID \
-+    EFI_GUID( 0xcae9be83, 0xb15f, 0x49cc, \
-+              0x86, 0x3f, 0x08, 0x1b, 0x74, 0x4a, 0x2d, 0x93)
- 
- typedef struct _gpt_header {
- 	__le64 signature;
diff --git a/target/linux/generic/hack-5.4/400-unlock_mx25l6406e_with_4bit_block_protect.patch b/target/linux/generic/hack-5.4/400-unlock_mx25l6406e_with_4bit_block_protect.patch
deleted file mode 100644
index 8112fa7e13..0000000000
--- a/target/linux/generic/hack-5.4/400-unlock_mx25l6406e_with_4bit_block_protect.patch
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -196,7 +196,7 @@ struct flash_info {
- 	u16		page_size;
- 	u16		addr_width;
- 
--	u16		flags;
-+	u32		flags;
- #define SECT_4K			BIT(0)	/* SPINOR_OP_BE_4K works uniformly */
- #define SPI_NOR_NO_ERASE	BIT(1)	/* No erase command needed */
- #define SST_WRITE		BIT(2)	/* use SST byte programming */
-@@ -233,6 +233,10 @@ struct flash_info {
- #define SPI_NOR_SKIP_SFDP	BIT(13)	/* Skip parsing of SFDP tables */
- #define USE_CLSR		BIT(14)	/* use CLSR command */
- #define SPI_NOR_OCTAL_READ	BIT(15)	/* Flash supports Octal Read */
-+#define SPI_NOR_4BIT_BP		BIT(17) /*
-+					 * Flash SR has 4 bit fields (BP0-3)
-+					 * for block protection.
-+					 */
- 
- 	/* Part specific fixup hooks. */
- 	const struct spi_nor_fixups *fixups;
-@@ -1985,6 +1989,9 @@ static int spi_nor_clear_sr_bp(struct sp
- 	int ret;
- 	u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
- 
-+	if (nor->flags & SNOR_F_HAS_4BIT_BP)
-+		mask |= SR_BP3;
-+
- 	ret = read_sr(nor);
- 	if (ret < 0) {
- 		dev_err(nor->dev, "error while reading status register\n");
-@@ -2338,7 +2345,7 @@ static const struct flash_info spi_nor_i
- 	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
- 	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, SECT_4K) },
- 	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
--	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
-+	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_4BIT_BP) },
- 	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4, SECT_4K) },
- 	{ "mx25u3235f",	 INFO(0xc22536, 0, 64 * 1024,  64,
- 			 SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-@@ -5026,6 +5033,9 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	if (info->flags & USE_CLSR)
- 		nor->flags |= SNOR_F_USE_CLSR;
- 
-+	if (info->flags & SPI_NOR_4BIT_BP)
-+		nor->flags |= SNOR_F_HAS_4BIT_BP;
-+
- 	if (info->flags & SPI_NOR_NO_ERASE)
- 		mtd->flags |= MTD_NO_ERASE;
- 
---- a/include/linux/mtd/spi-nor.h
-+++ b/include/linux/mtd/spi-nor.h
-@@ -127,6 +127,7 @@
- #define SR_BP0			BIT(2)	/* Block protect 0 */
- #define SR_BP1			BIT(3)	/* Block protect 1 */
- #define SR_BP2			BIT(4)	/* Block protect 2 */
-+#define SR_BP3			BIT(5)	/* Block protect 3 */
- #define SR_TB			BIT(5)	/* Top/Bottom protect */
- #define SR_SRWD			BIT(7)	/* SR write protect */
- /* Spansion/Cypress specific status bits */
-@@ -243,6 +244,7 @@ enum spi_nor_option_flags {
- 	SNOR_F_4B_OPCODES	= BIT(6),
- 	SNOR_F_HAS_4BAIT	= BIT(7),
- 	SNOR_F_HAS_LOCK		= BIT(8),
-+	SNOR_F_HAS_4BIT_BP      = BIT(12),
- };
- 
- /**
diff --git a/target/linux/generic/hack-5.4/421-drivers-mtd-parsers-add-nvmem-support-to-cmdlinepart.patch b/target/linux/generic/hack-5.4/421-drivers-mtd-parsers-add-nvmem-support-to-cmdlinepart.patch
deleted file mode 100644
index 26a1796d9a..0000000000
--- a/target/linux/generic/hack-5.4/421-drivers-mtd-parsers-add-nvmem-support-to-cmdlinepart.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From 6fa9e3678eb002246df1280322b6a024853950a5 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 11 Oct 2021 00:53:14 +0200
-Subject: [PATCH] drivers: mtd: parsers: add nvmem support to cmdlinepart
-
-Assuming cmdlinepart is only one level deep partition scheme and that
-static partition are also defined in DTS, we can assign an of_node for
-partition declared from bootargs. cmdlinepart have priority than
-fiexed-partition parser so in this specific case the parser doesn't
-assign an of_node. Fix this by searching a defined of_node using a
-similar fixed_partition parser and if a partition is found with the same
-label, check that it has the same offset and size and return the DT
-of_node to correctly use NVMEM cells.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- drivers/mtd/parsers/cmdlinepart.c | 71 +++++++++++++++++++++++++++++++
- 1 file changed, 71 insertions(+)
-
---- a/drivers/mtd/parsers/cmdlinepart.c
-+++ b/drivers/mtd/parsers/cmdlinepart.c
-@@ -43,6 +43,7 @@
- #include <linux/mtd/partitions.h>
- #include <linux/module.h>
- #include <linux/err.h>
-+#include <linux/of.h>
- 
- /* debug macro */
- #if 0
-@@ -315,6 +316,68 @@ static int mtdpart_setup_real(char *s)
- 	return 0;
- }
- 
-+static int search_fixed_partition(struct mtd_info *master,
-+				  struct mtd_partition *target_part,
-+				  struct mtd_partition *fixed_part)
-+{
-+	struct device_node *mtd_node;
-+	struct device_node *ofpart_node;
-+	struct device_node *pp;
-+	struct mtd_partition part;
-+	const char *partname;
-+
-+	mtd_node = mtd_get_of_node(master);
-+	if (!mtd_node)
-+		return -EINVAL;
-+
-+	ofpart_node = of_get_child_by_name(mtd_node, "partitions");
-+
-+	for_each_child_of_node(ofpart_node,  pp) {
-+		const __be32 *reg;
-+		int len;
-+		int a_cells, s_cells;
-+
-+		reg = of_get_property(pp, "reg", &len);
-+		if (!reg) {
-+			pr_debug("%s: ofpart partition %pOF (%pOF) missing reg property.\n",
-+				 master->name, pp,
-+				 mtd_node);
-+			continue;
-+		}
-+
-+		a_cells = of_n_addr_cells(pp);
-+		s_cells = of_n_size_cells(pp);
-+		if (len / 4 != a_cells + s_cells) {
-+			pr_debug("%s: ofpart partition %pOF (%pOF) error parsing reg property.\n",
-+				 master->name, pp,
-+				 mtd_node);
-+			continue;
-+		}
-+
-+		part.offset = of_read_number(reg, a_cells);
-+		part.size = of_read_number(reg + a_cells, s_cells);
-+		part.of_node = pp;
-+
-+		partname = of_get_property(pp, "label", &len);
-+		if (!partname)
-+			partname = of_get_property(pp, "name", &len);
-+		part.name = partname;
-+
-+		if (!strncmp(target_part->name, part.name, len)) {
-+			if (part.offset != target_part->offset)
-+				return -EINVAL;
-+
-+			if (part.size != target_part->size)
-+				return -EINVAL;
-+
-+			memcpy(fixed_part, &part, sizeof(struct mtd_partition));
-+			return 0;
-+		}
-+	}
-+
-+	return -EINVAL;
-+}
-+
- /*
-  * Main function to be called from the MTD mapping driver/device to
-  * obtain the partitioning information. At this point the command line
-@@ -330,6 +393,7 @@ static int parse_cmdline_partitions(stru
- 	int i, err;
- 	struct cmdline_mtd_partition *part;
- 	const char *mtd_id = master->name;
-+	struct mtd_partition fixed_part;
- 
- 	/* parse command line */
- 	if (!cmdline_parsed) {
-@@ -374,6 +438,13 @@ static int parse_cmdline_partitions(stru
- 				sizeof(*part->parts) * (part->num_parts - i));
- 			i--;
- 		}
-+
-+		err = search_fixed_partition(master, &part->parts[i], &fixed_part);
-+		if (!err) {
-+			part->parts[i].of_node = fixed_part.of_node;
-+			pr_info("Found partition defined in DT for %s. Assigning OF node to support nvmem.",
-+				part->parts[i].name);
-+		}
- 	}
- 
- 	*pparts = kmemdup(part->parts, sizeof(*part->parts) * part->num_parts,
diff --git a/target/linux/generic/hack-5.4/531-debloat_lzma.patch b/target/linux/generic/hack-5.4/531-debloat_lzma.patch
deleted file mode 100644
index 2f70eee3e9..0000000000
--- a/target/linux/generic/hack-5.4/531-debloat_lzma.patch
+++ /dev/null
@@ -1,1040 +0,0 @@
-From 3fd297761ac246c54d7723c57fca95c112b99465 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 21:15:44 +0200
-Subject: lzma: de-bloat the lzma library used by jffs2
-
-lede-commit: 3fd1dd08fbcbb78b34efefd32c3032e5c99108d6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/lzma/LzFind.h  |  17 ---
- include/linux/lzma/LzmaDec.h | 101 ---------------
- include/linux/lzma/LzmaEnc.h |  20 ---
- lib/lzma/LzFind.c            | 287 ++++---------------------------------------
- lib/lzma/LzmaDec.c           |  86 +------------
- lib/lzma/LzmaEnc.c           | 172 ++------------------------
- 6 files changed, 42 insertions(+), 641 deletions(-)
-
---- a/include/linux/lzma/LzFind.h
-+++ b/include/linux/lzma/LzFind.h
-@@ -55,11 +55,6 @@ typedef struct _CMatchFinder
- 
- #define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
- 
--int MatchFinder_NeedMove(CMatchFinder *p);
--Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
--void MatchFinder_MoveBlock(CMatchFinder *p);
--void MatchFinder_ReadIfRequired(CMatchFinder *p);
--
- void MatchFinder_Construct(CMatchFinder *p);
- 
- /* Conditions:
-@@ -70,12 +65,6 @@ int MatchFinder_Create(CMatchFinder *p,
-     UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-     ISzAlloc *alloc);
- void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
--void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
--void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
--
--UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
--    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
--    UInt32 *distances, UInt32 maxLen);
- 
- /*
- Conditions:
-@@ -102,12 +91,6 @@ typedef struct _IMatchFinder
- 
- void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
- 
--void MatchFinder_Init(CMatchFinder *p);
--UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
--UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
--void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
--void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
--
- #ifdef __cplusplus
- }
- #endif
---- a/include/linux/lzma/LzmaDec.h
-+++ b/include/linux/lzma/LzmaDec.h
-@@ -31,14 +31,6 @@ typedef struct _CLzmaProps
-   UInt32 dicSize;
- } CLzmaProps;
- 
--/* LzmaProps_Decode - decodes properties
--Returns:
--  SZ_OK
--  SZ_ERROR_UNSUPPORTED - Unsupported properties
--*/
--
--SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
--
- 
- /* ---------- LZMA Decoder state ---------- */
- 
-@@ -70,8 +62,6 @@ typedef struct
- 
- #define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
- 
--void LzmaDec_Init(CLzmaDec *p);
--
- /* There are two types of LZMA streams:
-      0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
-      1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
-@@ -108,97 +98,6 @@ typedef enum
- 
- /* ELzmaStatus is used only as output value for function call */
- 
--
--/* ---------- Interfaces ---------- */
--
--/* There are 3 levels of interfaces:
--     1) Dictionary Interface
--     2) Buffer Interface
--     3) One Call Interface
--   You can select any of these interfaces, but don't mix functions from different
--   groups for same object. */
--
--
--/* There are two variants to allocate state for Dictionary Interface:
--     1) LzmaDec_Allocate / LzmaDec_Free
--     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
--   You can use variant 2, if you set dictionary buffer manually.
--   For Buffer Interface you must always use variant 1.
--
--LzmaDec_Allocate* can return:
--  SZ_OK
--  SZ_ERROR_MEM         - Memory allocation error
--  SZ_ERROR_UNSUPPORTED - Unsupported properties
--*/
--
--SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
--void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
--
--SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
--void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
--
--/* ---------- Dictionary Interface ---------- */
--
--/* You can use it, if you want to eliminate the overhead for data copying from
--   dictionary to some other external buffer.
--   You must work with CLzmaDec variables directly in this interface.
--
--   STEPS:
--     LzmaDec_Constr()
--     LzmaDec_Allocate()
--     for (each new stream)
--     {
--       LzmaDec_Init()
--       while (it needs more decompression)
--       {
--         LzmaDec_DecodeToDic()
--         use data from CLzmaDec::dic and update CLzmaDec::dicPos
--       }
--     }
--     LzmaDec_Free()
--*/
--
--/* LzmaDec_DecodeToDic
--
--   The decoding to internal dictionary buffer (CLzmaDec::dic).
--   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
--
--finishMode:
--  It has meaning only if the decoding reaches output limit (dicLimit).
--  LZMA_FINISH_ANY - Decode just dicLimit bytes.
--  LZMA_FINISH_END - Stream must be finished after dicLimit.
--
--Returns:
--  SZ_OK
--    status:
--      LZMA_STATUS_FINISHED_WITH_MARK
--      LZMA_STATUS_NOT_FINISHED
--      LZMA_STATUS_NEEDS_MORE_INPUT
--      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
--  SZ_ERROR_DATA - Data error
--*/
--
--SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
--    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
--
--
--/* ---------- Buffer Interface ---------- */
--
--/* It's zlib-like interface.
--   See LzmaDec_DecodeToDic description for information about STEPS and return results,
--   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
--   to work with CLzmaDec variables manually.
--
--finishMode:
--  It has meaning only if the decoding reaches output limit (*destLen).
--  LZMA_FINISH_ANY - Decode just destLen bytes.
--  LZMA_FINISH_END - Stream must be finished after (*destLen).
--*/
--
--SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
--    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
--
--
- /* ---------- One Call Interface ---------- */
- 
- /* LzmaDecode
---- a/include/linux/lzma/LzmaEnc.h
-+++ b/include/linux/lzma/LzmaEnc.h
-@@ -31,9 +31,6 @@ typedef struct _CLzmaEncProps
- } CLzmaEncProps;
- 
- void LzmaEncProps_Init(CLzmaEncProps *p);
--void LzmaEncProps_Normalize(CLzmaEncProps *p);
--UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
--
- 
- /* ---------- CLzmaEncHandle Interface ---------- */
- 
-@@ -53,26 +50,9 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
- void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
- SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
- SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
--SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
--    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
- SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-     int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
- 
--/* ---------- One Call Interface ---------- */
--
--/* LzmaEncode
--Return code:
--  SZ_OK               - OK
--  SZ_ERROR_MEM        - Memory allocation error
--  SZ_ERROR_PARAM      - Incorrect paramater
--  SZ_ERROR_OUTPUT_EOF - output buffer overflow
--  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
--*/
--
--SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
--    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
--    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
--
- #ifdef __cplusplus
- }
- #endif
---- a/lib/lzma/LzFind.c
-+++ b/lib/lzma/LzFind.c
-@@ -14,9 +14,15 @@
- 
- #define kStartMaxLen 3
- 
-+#if 0
-+#define DIRECT_INPUT	p->directInput
-+#else
-+#define DIRECT_INPUT	1
-+#endif
-+
- static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
- {
--  if (!p->directInput)
-+  if (!DIRECT_INPUT)
-   {
-     alloc->Free(alloc, p->bufferBase);
-     p->bufferBase = 0;
-@@ -28,7 +34,7 @@ static void LzInWindow_Free(CMatchFinder
- static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
- {
-   UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
--  if (p->directInput)
-+  if (DIRECT_INPUT)
-   {
-     p->blockSize = blockSize;
-     return 1;
-@@ -42,12 +48,12 @@ static int LzInWindow_Create(CMatchFinde
-   return (p->bufferBase != 0);
- }
- 
--Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
--Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-+static Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
-+static Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
- 
--UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-+static UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
- 
--void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
-+static void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
- {
-   p->posLimit -= subValue;
-   p->pos -= subValue;
-@@ -58,7 +64,7 @@ static void MatchFinder_ReadBlock(CMatch
- {
-   if (p->streamEndWasReached || p->result != SZ_OK)
-     return;
--  if (p->directInput)
-+  if (DIRECT_INPUT)
-   {
-     UInt32 curSize = 0xFFFFFFFF - p->streamPos;
-     if (curSize > p->directInputRem)
-@@ -89,7 +95,7 @@ static void MatchFinder_ReadBlock(CMatch
-   }
- }
- 
--void MatchFinder_MoveBlock(CMatchFinder *p)
-+static void MatchFinder_MoveBlock(CMatchFinder *p)
- {
-   memmove(p->bufferBase,
-     p->buffer - p->keepSizeBefore,
-@@ -97,22 +103,14 @@ void MatchFinder_MoveBlock(CMatchFinder
-   p->buffer = p->bufferBase + p->keepSizeBefore;
- }
- 
--int MatchFinder_NeedMove(CMatchFinder *p)
-+static int MatchFinder_NeedMove(CMatchFinder *p)
- {
--  if (p->directInput)
-+  if (DIRECT_INPUT)
-     return 0;
-   /* if (p->streamEndWasReached) return 0; */
-   return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
- }
- 
--void MatchFinder_ReadIfRequired(CMatchFinder *p)
--{
--  if (p->streamEndWasReached)
--    return;
--  if (p->keepSizeAfter >= p->streamPos - p->pos)
--    MatchFinder_ReadBlock(p);
--}
--
- static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
- {
-   if (MatchFinder_NeedMove(p))
-@@ -268,7 +266,7 @@ static void MatchFinder_SetLimits(CMatch
-   p->posLimit = p->pos + limit;
- }
- 
--void MatchFinder_Init(CMatchFinder *p)
-+static void MatchFinder_Init(CMatchFinder *p)
- {
-   UInt32 i;
-   for (i = 0; i < p->hashSizeSum; i++)
-@@ -287,7 +285,7 @@ static UInt32 MatchFinder_GetSubValue(CM
-   return (p->pos - p->historySize - 1) & kNormalizeMask;
- }
- 
--void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
-+static void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
- {
-   UInt32 i;
-   for (i = 0; i < numItems; i++)
-@@ -319,38 +317,7 @@ static void MatchFinder_CheckLimits(CMat
-   MatchFinder_SetLimits(p);
- }
- 
--static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
--    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
--    UInt32 *distances, UInt32 maxLen)
--{
--  son[_cyclicBufferPos] = curMatch;
--  for (;;)
--  {
--    UInt32 delta = pos - curMatch;
--    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
--      return distances;
--    {
--      const Byte *pb = cur - delta;
--      curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
--      if (pb[maxLen] == cur[maxLen] && *pb == *cur)
--      {
--        UInt32 len = 0;
--        while (++len != lenLimit)
--          if (pb[len] != cur[len])
--            break;
--        if (maxLen < len)
--        {
--          *distances++ = maxLen = len;
--          *distances++ = delta - 1;
--          if (len == lenLimit)
--            return distances;
--        }
--      }
--    }
--  }
--}
--
--UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+static UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-     UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-     UInt32 *distances, UInt32 maxLen)
- {
-@@ -460,10 +427,10 @@ static void SkipMatchesSpec(UInt32 lenLi
-   p->buffer++; \
-   if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
- 
--#define MOVE_POS_RET MOVE_POS return offset;
--
- static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
- 
-+#define MOVE_POS_RET MatchFinder_MovePos(p); return offset;
-+
- #define GET_MATCHES_HEADER2(minLen, ret_op) \
-   UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
-   lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
-@@ -479,62 +446,7 @@ static void MatchFinder_MovePos(CMatchFi
-   distances + offset, maxLen) - distances); MOVE_POS_RET;
- 
- #define SKIP_FOOTER \
--  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
--
--static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
--  UInt32 offset;
--  GET_MATCHES_HEADER(2)
--  HASH2_CALC;
--  curMatch = p->hash[hashValue];
--  p->hash[hashValue] = p->pos;
--  offset = 0;
--  GET_MATCHES_FOOTER(offset, 1)
--}
--
--UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
--  UInt32 offset;
--  GET_MATCHES_HEADER(3)
--  HASH_ZIP_CALC;
--  curMatch = p->hash[hashValue];
--  p->hash[hashValue] = p->pos;
--  offset = 0;
--  GET_MATCHES_FOOTER(offset, 2)
--}
--
--static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
--  UInt32 hash2Value, delta2, maxLen, offset;
--  GET_MATCHES_HEADER(3)
--
--  HASH3_CALC;
--
--  delta2 = p->pos - p->hash[hash2Value];
--  curMatch = p->hash[kFix3HashSize + hashValue];
--
--  p->hash[hash2Value] =
--  p->hash[kFix3HashSize + hashValue] = p->pos;
--
--
--  maxLen = 2;
--  offset = 0;
--  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
--  {
--    for (; maxLen != lenLimit; maxLen++)
--      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
--        break;
--    distances[0] = maxLen;
--    distances[1] = delta2 - 1;
--    offset = 2;
--    if (maxLen == lenLimit)
--    {
--      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
--      MOVE_POS_RET;
--    }
--  }
--  GET_MATCHES_FOOTER(offset, maxLen)
--}
-+  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MatchFinder_MovePos(p);
- 
- static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
- {
-@@ -583,108 +495,6 @@ static UInt32 Bt4_MatchFinder_GetMatches
-   GET_MATCHES_FOOTER(offset, maxLen)
- }
- 
--static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
--  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
--  GET_MATCHES_HEADER(4)
--
--  HASH4_CALC;
--
--  delta2 = p->pos - p->hash[                hash2Value];
--  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
--  curMatch = p->hash[kFix4HashSize + hashValue];
--
--  p->hash[                hash2Value] =
--  p->hash[kFix3HashSize + hash3Value] =
--  p->hash[kFix4HashSize + hashValue] = p->pos;
--
--  maxLen = 1;
--  offset = 0;
--  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
--  {
--    distances[0] = maxLen = 2;
--    distances[1] = delta2 - 1;
--    offset = 2;
--  }
--  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
--  {
--    maxLen = 3;
--    distances[offset + 1] = delta3 - 1;
--    offset += 2;
--    delta2 = delta3;
--  }
--  if (offset != 0)
--  {
--    for (; maxLen != lenLimit; maxLen++)
--      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
--        break;
--    distances[offset - 2] = maxLen;
--    if (maxLen == lenLimit)
--    {
--      p->son[p->cyclicBufferPos] = curMatch;
--      MOVE_POS_RET;
--    }
--  }
--  if (maxLen < 3)
--    maxLen = 3;
--  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
--    distances + offset, maxLen) - (distances));
--  MOVE_POS_RET
--}
--
--UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
--  UInt32 offset;
--  GET_MATCHES_HEADER(3)
--  HASH_ZIP_CALC;
--  curMatch = p->hash[hashValue];
--  p->hash[hashValue] = p->pos;
--  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
--    distances, 2) - (distances));
--  MOVE_POS_RET
--}
--
--static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
--  do
--  {
--    SKIP_HEADER(2)
--    HASH2_CALC;
--    curMatch = p->hash[hashValue];
--    p->hash[hashValue] = p->pos;
--    SKIP_FOOTER
--  }
--  while (--num != 0);
--}
--
--void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
--  do
--  {
--    SKIP_HEADER(3)
--    HASH_ZIP_CALC;
--    curMatch = p->hash[hashValue];
--    p->hash[hashValue] = p->pos;
--    SKIP_FOOTER
--  }
--  while (--num != 0);
--}
--
--static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
--  do
--  {
--    UInt32 hash2Value;
--    SKIP_HEADER(3)
--    HASH3_CALC;
--    curMatch = p->hash[kFix3HashSize + hashValue];
--    p->hash[hash2Value] =
--    p->hash[kFix3HashSize + hashValue] = p->pos;
--    SKIP_FOOTER
--  }
--  while (--num != 0);
--}
--
- static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
- {
-   do
-@@ -701,61 +511,12 @@ static void Bt4_MatchFinder_Skip(CMatchF
-   while (--num != 0);
- }
- 
--static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
--  do
--  {
--    UInt32 hash2Value, hash3Value;
--    SKIP_HEADER(4)
--    HASH4_CALC;
--    curMatch = p->hash[kFix4HashSize + hashValue];
--    p->hash[                hash2Value] =
--    p->hash[kFix3HashSize + hash3Value] =
--    p->hash[kFix4HashSize + hashValue] = p->pos;
--    p->son[p->cyclicBufferPos] = curMatch;
--    MOVE_POS
--  }
--  while (--num != 0);
--}
--
--void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
--  do
--  {
--    SKIP_HEADER(3)
--    HASH_ZIP_CALC;
--    curMatch = p->hash[hashValue];
--    p->hash[hashValue] = p->pos;
--    p->son[p->cyclicBufferPos] = curMatch;
--    MOVE_POS
--  }
--  while (--num != 0);
--}
--
- void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
- {
-   vTable->Init = (Mf_Init_Func)MatchFinder_Init;
-   vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
-   vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
-   vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
--  if (!p->btMode)
--  {
--    vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
--    vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
--  }
--  else if (p->numHashBytes == 2)
--  {
--    vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
--    vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
--  }
--  else if (p->numHashBytes == 3)
--  {
--    vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
--    vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
--  }
--  else
--  {
--    vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
--    vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
--  }
-+  vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
-+  vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
- }
---- a/lib/lzma/LzmaDec.c
-+++ b/lib/lzma/LzmaDec.c
-@@ -682,7 +682,7 @@ static void LzmaDec_InitRc(CLzmaDec *p,
-   p->needFlush = 0;
- }
- 
--void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
-+static void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
- {
-   p->needFlush = 1;
-   p->remainLen = 0;
-@@ -698,7 +698,7 @@ void LzmaDec_InitDicAndState(CLzmaDec *p
-     p->needInitState = 1;
- }
- 
--void LzmaDec_Init(CLzmaDec *p)
-+static void LzmaDec_Init(CLzmaDec *p)
- {
-   p->dicPos = 0;
-   LzmaDec_InitDicAndState(p, True, True);
-@@ -716,7 +716,7 @@ static void LzmaDec_InitStateReal(CLzmaD
-   p->needInitState = 0;
- }
- 
--SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-+static SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-     ELzmaFinishMode finishMode, ELzmaStatus *status)
- {
-   SizeT inSize = *srcLen;
-@@ -837,65 +837,13 @@ SRes LzmaDec_DecodeToDic(CLzmaDec *p, Si
-   return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
- }
- 
--SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
--{
--  SizeT outSize = *destLen;
--  SizeT inSize = *srcLen;
--  *srcLen = *destLen = 0;
--  for (;;)
--  {
--    SizeT inSizeCur = inSize, outSizeCur, dicPos;
--    ELzmaFinishMode curFinishMode;
--    SRes res;
--    if (p->dicPos == p->dicBufSize)
--      p->dicPos = 0;
--    dicPos = p->dicPos;
--    if (outSize > p->dicBufSize - dicPos)
--    {
--      outSizeCur = p->dicBufSize;
--      curFinishMode = LZMA_FINISH_ANY;
--    }
--    else
--    {
--      outSizeCur = dicPos + outSize;
--      curFinishMode = finishMode;
--    }
--
--    res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
--    src += inSizeCur;
--    inSize -= inSizeCur;
--    *srcLen += inSizeCur;
--    outSizeCur = p->dicPos - dicPos;
--    memcpy(dest, p->dic + dicPos, outSizeCur);
--    dest += outSizeCur;
--    outSize -= outSizeCur;
--    *destLen += outSizeCur;
--    if (res != 0)
--      return res;
--    if (outSizeCur == 0 || outSize == 0)
--      return SZ_OK;
--  }
--}
--
--void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
-+static void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
- {
-   alloc->Free(alloc, p->probs);
-   p->probs = 0;
- }
- 
--static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
--{
--  alloc->Free(alloc, p->dic);
--  p->dic = 0;
--}
--
--void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
--{
--  LzmaDec_FreeProbs(p, alloc);
--  LzmaDec_FreeDict(p, alloc);
--}
--
--SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
-+static SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
- {
-   UInt32 dicSize;
-   Byte d;
-@@ -935,7 +883,7 @@ static SRes LzmaDec_AllocateProbs2(CLzma
-   return SZ_OK;
- }
- 
--SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+static SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
- {
-   CLzmaProps propNew;
-   RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-@@ -943,28 +891,6 @@ SRes LzmaDec_AllocateProbs(CLzmaDec *p,
-   p->prop = propNew;
-   return SZ_OK;
- }
--
--SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
--{
--  CLzmaProps propNew;
--  SizeT dicBufSize;
--  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
--  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
--  dicBufSize = propNew.dicSize;
--  if (p->dic == 0 || dicBufSize != p->dicBufSize)
--  {
--    LzmaDec_FreeDict(p, alloc);
--    p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
--    if (p->dic == 0)
--    {
--      LzmaDec_FreeProbs(p, alloc);
--      return SZ_ERROR_MEM;
--    }
--  }
--  p->dicBufSize = dicBufSize;
--  p->prop = propNew;
--  return SZ_OK;
--}
- 
- SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-     const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
---- a/lib/lzma/LzmaEnc.c
-+++ b/lib/lzma/LzmaEnc.c
-@@ -53,7 +53,7 @@ void LzmaEncProps_Init(CLzmaEncProps *p)
-   p->writeEndMark = 0;
- }
- 
--void LzmaEncProps_Normalize(CLzmaEncProps *p)
-+static void LzmaEncProps_Normalize(CLzmaEncProps *p)
- {
-   int level = p->level;
-   if (level < 0) level = 5;
-@@ -76,7 +76,7 @@ void LzmaEncProps_Normalize(CLzmaEncProp
-       #endif
- }
- 
--UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
-+static UInt32 __maybe_unused LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
- {
-   CLzmaEncProps props = *props2;
-   LzmaEncProps_Normalize(&props);
-@@ -93,7 +93,7 @@ UInt32 LzmaEncProps_GetDictSize(const CL
- 
- #define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
- 
--UInt32 GetPosSlot1(UInt32 pos)
-+static UInt32 GetPosSlot1(UInt32 pos)
- {
-   UInt32 res;
-   BSR2_RET(pos, res);
-@@ -107,7 +107,7 @@ UInt32 GetPosSlot1(UInt32 pos)
- #define kNumLogBits (9 + (int)sizeof(size_t) / 2)
- #define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
- 
--void LzmaEnc_FastPosInit(Byte *g_FastPos)
-+static void LzmaEnc_FastPosInit(Byte *g_FastPos)
- {
-   int c = 2, slotFast;
-   g_FastPos[0] = 0;
-@@ -339,58 +339,6 @@ typedef struct
-   CSaveState saveState;
- } CLzmaEnc;
- 
--void LzmaEnc_SaveState(CLzmaEncHandle pp)
--{
--  CLzmaEnc *p = (CLzmaEnc *)pp;
--  CSaveState *dest = &p->saveState;
--  int i;
--  dest->lenEnc = p->lenEnc;
--  dest->repLenEnc = p->repLenEnc;
--  dest->state = p->state;
--
--  for (i = 0; i < kNumStates; i++)
--  {
--    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
--    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
--  }
--  for (i = 0; i < kNumLenToPosStates; i++)
--    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
--  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
--  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
--  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
--  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
--  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
--  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
--  memcpy(dest->reps, p->reps, sizeof(p->reps));
--  memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
--}
--
--void LzmaEnc_RestoreState(CLzmaEncHandle pp)
--{
--  CLzmaEnc *dest = (CLzmaEnc *)pp;
--  const CSaveState *p = &dest->saveState;
--  int i;
--  dest->lenEnc = p->lenEnc;
--  dest->repLenEnc = p->repLenEnc;
--  dest->state = p->state;
--
--  for (i = 0; i < kNumStates; i++)
--  {
--    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
--    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
--  }
--  for (i = 0; i < kNumLenToPosStates; i++)
--    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
--  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
--  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
--  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
--  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
--  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
--  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
--  memcpy(dest->reps, p->reps, sizeof(p->reps));
--  memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
--}
--
- SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
- {
-   CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -600,7 +548,7 @@ static void LitEnc_EncodeMatched(CRangeE
-   while (symbol < 0x10000);
- }
- 
--void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
-+static void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
- {
-   UInt32 i;
-   for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
-@@ -1676,7 +1624,7 @@ static void FillDistancesPrices(CLzmaEnc
-   p->matchPriceCount = 0;
- }
- 
--void LzmaEnc_Construct(CLzmaEnc *p)
-+static void LzmaEnc_Construct(CLzmaEnc *p)
- {
-   RangeEnc_Construct(&p->rc);
-   MatchFinder_Construct(&p->matchFinderBase);
-@@ -1709,7 +1657,7 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
-   return p;
- }
- 
--void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
-+static void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
- {
-   alloc->Free(alloc, p->litProbs);
-   alloc->Free(alloc, p->saveState.litProbs);
-@@ -1717,7 +1665,7 @@ void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAl
-   p->saveState.litProbs = 0;
- }
- 
--void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+static void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
- {
-   #ifndef _7ZIP_ST
-   MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
-@@ -1947,7 +1895,7 @@ static SRes LzmaEnc_Alloc(CLzmaEnc *p, U
-   return SZ_OK;
- }
- 
--void LzmaEnc_Init(CLzmaEnc *p)
-+static void LzmaEnc_Init(CLzmaEnc *p)
- {
-   UInt32 i;
-   p->state = 0;
-@@ -2005,7 +1953,7 @@ void LzmaEnc_Init(CLzmaEnc *p)
-   p->lpMask = (1 << p->lp) - 1;
- }
- 
--void LzmaEnc_InitPrices(CLzmaEnc *p)
-+static void LzmaEnc_InitPrices(CLzmaEnc *p)
- {
-   if (!p->fastMode)
-   {
-@@ -2037,26 +1985,6 @@ static SRes LzmaEnc_AllocAndInit(CLzmaEn
-   return SZ_OK;
- }
- 
--static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
--    ISzAlloc *alloc, ISzAlloc *allocBig)
--{
--  CLzmaEnc *p = (CLzmaEnc *)pp;
--  p->matchFinderBase.stream = inStream;
--  p->needInit = 1;
--  p->rc.outStream = outStream;
--  return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
--}
--
--SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
--    ISeqInStream *inStream, UInt32 keepWindowSize,
--    ISzAlloc *alloc, ISzAlloc *allocBig)
--{
--  CLzmaEnc *p = (CLzmaEnc *)pp;
--  p->matchFinderBase.stream = inStream;
--  p->needInit = 1;
--  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
--}
--
- static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
- {
-   p->matchFinderBase.directInput = 1;
-@@ -2064,7 +1992,7 @@ static void LzmaEnc_SetInputBuf(CLzmaEnc
-   p->matchFinderBase.directInputRem = srcLen;
- }
- 
--SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-+static SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-     UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
- {
-   CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -2074,7 +2002,7 @@ SRes LzmaEnc_MemPrepare(CLzmaEncHandle p
-   return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
- }
- 
--void LzmaEnc_Finish(CLzmaEncHandle pp)
-+static void LzmaEnc_Finish(CLzmaEncHandle pp)
- {
-   #ifndef _7ZIP_ST
-   CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -2107,53 +2035,6 @@ static size_t MyWrite(void *pp, const vo
-   return size;
- }
- 
--
--UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
--{
--  const CLzmaEnc *p = (CLzmaEnc *)pp;
--  return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
--}
--
--const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
--{
--  const CLzmaEnc *p = (CLzmaEnc *)pp;
--  return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
--}
--
--SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
--    Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
--{
--  CLzmaEnc *p = (CLzmaEnc *)pp;
--  UInt64 nowPos64;
--  SRes res;
--  CSeqOutStreamBuf outStream;
--
--  outStream.funcTable.Write = MyWrite;
--  outStream.data = dest;
--  outStream.rem = *destLen;
--  outStream.overflow = False;
--
--  p->writeEndMark = False;
--  p->finished = False;
--  p->result = SZ_OK;
--
--  if (reInit)
--    LzmaEnc_Init(p);
--  LzmaEnc_InitPrices(p);
--  nowPos64 = p->nowPos64;
--  RangeEnc_Init(&p->rc);
--  p->rc.outStream = &outStream.funcTable;
--
--  res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
--
--  *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
--  *destLen -= outStream.rem;
--  if (outStream.overflow)
--    return SZ_ERROR_OUTPUT_EOF;
--
--  return res;
--}
--
- static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
- {
-   SRes res = SZ_OK;
-@@ -2184,13 +2065,6 @@ static SRes LzmaEnc_Encode2(CLzmaEnc *p,
-   return res;
- }
- 
--SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
--    ISzAlloc *alloc, ISzAlloc *allocBig)
--{
--  RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
--  return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
--}
--
- SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
- {
-   CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -2247,25 +2121,3 @@ SRes LzmaEnc_MemEncode(CLzmaEncHandle pp
-     return SZ_ERROR_OUTPUT_EOF;
-   return res;
- }
--
--SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
--    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
--    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
--{
--  CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
--  SRes res;
--  if (p == 0)
--    return SZ_ERROR_MEM;
--
--  res = LzmaEnc_SetProps(p, props);
--  if (res == SZ_OK)
--  {
--    res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
--    if (res == SZ_OK)
--      res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
--          writeEndMark, progress, alloc, allocBig);
--  }
--
--  LzmaEnc_Destroy(p, alloc, allocBig);
--  return res;
--}
diff --git a/target/linux/generic/hack-5.4/550-loop-Report-EOPNOTSUPP-properly.patch b/target/linux/generic/hack-5.4/550-loop-Report-EOPNOTSUPP-properly.patch
deleted file mode 100644
index 0e5447d454..0000000000
--- a/target/linux/generic/hack-5.4/550-loop-Report-EOPNOTSUPP-properly.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 2e864386e62e702a343be2507062ee08d5dfc810 Mon Sep 17 00:00:00 2001
-From: Evan Green <evgreen@chromium.org>
-Date: Thu, 14 Nov 2019 15:50:07 -0800
-Subject: loop: Report EOPNOTSUPP properly
-
-Properly plumb out EOPNOTSUPP from loop driver operations, which may
-get returned when for instance a discard operation is attempted but not
-supported by the underlying block device. Before this change, everything
-was reported in the log as an I/O error, which is scary and not
-helpful in debugging.
-
-Signed-off-by: Evan Green <evgreen@chromium.org>
-Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
-Reviewed-by: Bart Van Assche <bvanassche@acm.org>
----
- drivers/block/loop.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/drivers/block/loop.c
-+++ b/drivers/block/loop.c
-@@ -462,7 +462,7 @@ static void lo_complete_rq(struct reques
- 	if (!cmd->use_aio || cmd->ret < 0 || cmd->ret == blk_rq_bytes(rq) ||
- 	    req_op(rq) != REQ_OP_READ) {
- 		if (cmd->ret < 0)
--			ret = BLK_STS_IOERR;
-+			ret = errno_to_blk_status(cmd->ret);
- 		goto end_io;
- 	}
- 
-@@ -1973,7 +1973,10 @@ static void loop_handle_cmd(struct loop_
-  failed:
- 	/* complete non-aio request */
- 	if (!cmd->use_aio || ret) {
--		cmd->ret = ret ? -EIO : 0;
-+		if (ret == -EOPNOTSUPP)
-+			cmd->ret = ret;
-+		else
-+			cmd->ret = ret ? -EIO : 0;
- 		blk_mq_complete_request(rq);
- 	}
- }
diff --git a/target/linux/generic/hack-5.4/645-netfilter-connmark-introduce-set-dscpmark.patch b/target/linux/generic/hack-5.4/645-netfilter-connmark-introduce-set-dscpmark.patch
deleted file mode 100644
index 2d3fe01a75..0000000000
--- a/target/linux/generic/hack-5.4/645-netfilter-connmark-introduce-set-dscpmark.patch
+++ /dev/null
@@ -1,212 +0,0 @@
-From eda40b8c8c82e0f2789d6bc8bf63846dce2e8f32 Mon Sep 17 00:00:00 2001
-From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Date: Sat, 23 Mar 2019 09:29:49 +0000
-Subject: [PATCH] netfilter: connmark: introduce set-dscpmark
-
-set-dscpmark is a method of storing the DSCP of an ip packet into
-conntrack mark.  In combination with a suitable tc filter action
-(act_ctinfo) DSCP values are able to be stored in the mark on egress and
-restored on ingress across links that otherwise alter or bleach DSCP.
-
-This is useful for qdiscs such as CAKE which are able to shape according
-to policies based on DSCP.
-
-Ingress classification is traditionally a challenging task since
-iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT
-lookups, hence are unable to see internal IPv4 addresses as used on the
-typical home masquerading gateway.
-
-x_tables CONNMARK set-dscpmark target solves the problem of storing the
-DSCP to the conntrack mark in a way suitable for the new act_ctinfo tc
-action to restore.
-
-The set-dscpmark option accepts 2 parameters, a 32bit 'dscpmask' and a
-32bit 'statemask'.  The dscp mask must be 6 contiguous bits and
-represents the area where the DSCP will be stored in the connmark.  The
-state mask is a minimum 1 bit length mask that must not overlap with the
-dscpmask.  It represents a flag which is set when the DSCP has been
-stored in the conntrack mark. This is useful to implement a 'one shot'
-iptables based classification where the 'complicated' iptables rules are
-only run once to classify the connection on initial (egress) packet and
-subsequent packets are all marked/restored with the same DSCP.  A state
-mask of zero disables the setting of a status bit/s.
-
-example syntax with a suitably modified iptables user space application:
-
-iptables -A QOS_MARK_eth0 -t mangle -j CONNMARK --set-dscpmark 0xfc000000/0x01000000
-
-Would store the DSCP in the top 6 bits of the 32bit mark field, and use
-the LSB of the top byte as the 'DSCP has been stored' marker.
-
-|----0xFC----conntrack mark----000000---|
-| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
-| DSCP       | unused | flag  |unused   |
-|-----------------------0x01---000000---|
-      ^                   ^
-      |                   |
-      ---|             Conditional flag
-         |             set this when dscp
-|-ip diffserv-|        stored in mark
-| 6 bits      |
-|-------------|
-
-an identically configured tc action to restore looks like:
-
-tc filter show dev eth0 ingress
-filter parent ffff: protocol all pref 10 u32 chain 0
-filter parent ffff: protocol all pref 10 u32 chain 0 fh 800: ht divisor 1
-filter parent ffff: protocol all pref 10 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1: not_in_hw
-  match 00000000/00000000 at 0
-	action order 1: ctinfo zone 0 pipe
-	 index 2 ref 1 bind 1 dscp 0xfc000000/0x1000000
-
-	action order 2: mirred (Egress Redirect to device ifb4eth0) stolen
-	index 1 ref 1 bind 1
-
-|----0xFC----conntrack mark----000000---|
-| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
-| DSCP       | unused | flag  |unused   |
-|-----------------------0x01---000000---|
-      |                   |
-      |                   |
-      ---|             Conditional flag
-         v             only restore if set
-|-ip diffserv-|
-| 6 bits      |
-|-------------|
-
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
----
- include/uapi/linux/netfilter/xt_connmark.h | 10 ++++
- net/netfilter/xt_connmark.c                | 55 ++++++++++++++++++----
- 2 files changed, 57 insertions(+), 8 deletions(-)
-
---- a/include/uapi/linux/netfilter/xt_connmark.h
-+++ b/include/uapi/linux/netfilter/xt_connmark.h
-@@ -20,6 +20,11 @@ enum {
- };
- 
- enum {
-+	XT_CONNMARK_VALUE =	(1 << 0),
-+	XT_CONNMARK_DSCP = 	(1 << 1)
-+};
-+
-+enum {
- 	D_SHIFT_LEFT = 0,
- 	D_SHIFT_RIGHT,
- };
-@@ -34,6 +39,11 @@ struct xt_connmark_tginfo2 {
- 	__u8 shift_dir, shift_bits, mode;
- };
- 
-+struct xt_connmark_tginfo3 {
-+	__u32 ctmark, ctmask, nfmask;
-+	__u8 shift_dir, shift_bits, mode, func;
-+};
-+
- struct xt_connmark_mtinfo1 {
- 	__u32 mark, mask;
- 	__u8 invert;
---- a/net/netfilter/xt_connmark.c
-+++ b/net/netfilter/xt_connmark.c
-@@ -24,12 +24,13 @@ MODULE_ALIAS("ipt_connmark");
- MODULE_ALIAS("ip6t_connmark");
- 
- static unsigned int
--connmark_tg_shift(struct sk_buff *skb, const struct xt_connmark_tginfo2 *info)
-+connmark_tg_shift(struct sk_buff *skb, const struct xt_connmark_tginfo3 *info)
- {
- 	enum ip_conntrack_info ctinfo;
- 	u_int32_t new_targetmark;
- 	struct nf_conn *ct;
- 	u_int32_t newmark;
-+	u_int8_t dscp;
- 
- 	ct = nf_ct_get(skb, &ctinfo);
- 	if (ct == NULL)
-@@ -37,12 +38,24 @@ connmark_tg_shift(struct sk_buff *skb, c
- 
- 	switch (info->mode) {
- 	case XT_CONNMARK_SET:
--		newmark = (ct->mark & ~info->ctmask) ^ info->ctmark;
--		if (info->shift_dir == D_SHIFT_RIGHT)
--			newmark >>= info->shift_bits;
--		else
--			newmark <<= info->shift_bits;
-+		newmark = ct->mark;
-+		if (info->func & XT_CONNMARK_VALUE) {
-+			newmark = (newmark & ~info->ctmask) ^ info->ctmark;
-+			if (info->shift_dir == D_SHIFT_RIGHT)
-+				newmark >>= info->shift_bits;
-+			else
-+				newmark <<= info->shift_bits;
-+		} else if (info->func & XT_CONNMARK_DSCP) {
-+			if (skb->protocol == htons(ETH_P_IP))
-+				dscp = ipv4_get_dsfield(ip_hdr(skb)) >> 2;
-+			else if (skb->protocol == htons(ETH_P_IPV6))
-+				dscp = ipv6_get_dsfield(ipv6_hdr(skb)) >> 2;
-+			else	/* protocol doesn't have diffserv */
-+				break;
- 
-+			newmark = (newmark & ~info->ctmark) |
-+				  (info->ctmask | (dscp << info->shift_bits));
-+		}
- 		if (ct->mark != newmark) {
- 			ct->mark = newmark;
- 			nf_conntrack_event_cache(IPCT_MARK, ct);
-@@ -81,20 +94,36 @@ static unsigned int
- connmark_tg(struct sk_buff *skb, const struct xt_action_param *par)
- {
- 	const struct xt_connmark_tginfo1 *info = par->targinfo;
--	const struct xt_connmark_tginfo2 info2 = {
-+	const struct xt_connmark_tginfo3 info3 = {
- 		.ctmark	= info->ctmark,
- 		.ctmask	= info->ctmask,
- 		.nfmask	= info->nfmask,
- 		.mode	= info->mode,
-+		.func	= XT_CONNMARK_VALUE
- 	};
- 
--	return connmark_tg_shift(skb, &info2);
-+	return connmark_tg_shift(skb, &info3);
- }
- 
- static unsigned int
- connmark_tg_v2(struct sk_buff *skb, const struct xt_action_param *par)
- {
- 	const struct xt_connmark_tginfo2 *info = par->targinfo;
-+	const struct xt_connmark_tginfo3 info3 = {
-+		.ctmark	= info->ctmark,
-+		.ctmask	= info->ctmask,
-+		.nfmask	= info->nfmask,
-+		.mode	= info->mode,
-+		.func	= XT_CONNMARK_VALUE
-+	};
-+
-+	return connmark_tg_shift(skb, &info3);
-+}
-+
-+static unsigned int
-+connmark_tg_v3(struct sk_buff *skb, const struct xt_action_param *par)
-+{
-+	const struct xt_connmark_tginfo3 *info = par->targinfo;
- 
- 	return connmark_tg_shift(skb, info);
- }
-@@ -165,6 +194,16 @@ static struct xt_target connmark_tg_reg[
- 		.targetsize     = sizeof(struct xt_connmark_tginfo2),
- 		.destroy        = connmark_tg_destroy,
- 		.me             = THIS_MODULE,
-+	},
-+	{
-+		.name           = "CONNMARK",
-+		.revision       = 3,
-+		.family         = NFPROTO_UNSPEC,
-+		.checkentry     = connmark_tg_check,
-+		.target         = connmark_tg_v3,
-+		.targetsize     = sizeof(struct xt_connmark_tginfo3),
-+		.destroy        = connmark_tg_destroy,
-+		.me             = THIS_MODULE,
- 	}
- };
- 
diff --git a/target/linux/generic/hack-5.4/647-netfilter-flow-acct.patch b/target/linux/generic/hack-5.4/647-netfilter-flow-acct.patch
deleted file mode 100644
index f9480d59d1..0000000000
--- a/target/linux/generic/hack-5.4/647-netfilter-flow-acct.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -160,6 +160,8 @@ struct nf_flow_table_hw {
- int nf_flow_table_hw_register(const struct nf_flow_table_hw *offload);
- void nf_flow_table_hw_unregister(const struct nf_flow_table_hw *offload);
- 
-+void nf_flow_table_acct(struct flow_offload *flow, struct sk_buff *skb, int dir);
-+
- extern struct work_struct nf_flow_offload_hw_work;
- 
- #define MODULE_ALIAS_NF_FLOWTABLE(family)	\
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -13,6 +13,7 @@
- #include <net/netfilter/nf_conntrack_core.h>
- #include <net/netfilter/nf_conntrack_l4proto.h>
- #include <net/netfilter/nf_conntrack_tuple.h>
-+#include <net/netfilter/nf_conntrack_acct.h>
- 
- struct flow_offload_entry {
- 	struct flow_offload	flow;
-@@ -164,6 +165,22 @@ void flow_offload_free(struct flow_offlo
- }
- EXPORT_SYMBOL_GPL(flow_offload_free);
- 
-+void nf_flow_table_acct(struct flow_offload *flow, struct sk_buff *skb, int dir)
-+{
-+	struct flow_offload_entry *entry;
-+	struct nf_conn_acct *acct;
-+
-+	entry = container_of(flow, struct flow_offload_entry, flow);
-+	acct = nf_conn_acct_find(entry->ct);
-+	if (acct) {
-+		struct nf_conn_counter *counter = acct->counter;
-+
-+		atomic64_inc(&counter[dir].packets);
-+		atomic64_add(skb->len, &counter[dir].bytes);
-+	}
-+}
-+EXPORT_SYMBOL_GPL(nf_flow_table_acct);
-+
- static u32 flow_offload_hash(const void *data, u32 len, u32 seed)
- {
- 	const struct flow_offload_tuple *tuple = data;
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -12,6 +12,7 @@
- #include <net/ip6_route.h>
- #include <net/neighbour.h>
- #include <net/netfilter/nf_flow_table.h>
-+
- /* For layer 4 checksum field offset. */
- #include <linux/tcp.h>
- #include <linux/udp.h>
-@@ -296,6 +297,7 @@ nf_flow_offload_ip_hook(void *priv, stru
- 	skb->dev = outdev;
- 	nexthop = rt_nexthop(rt, flow->tuplehash[!dir].tuple.src_v4.s_addr);
- 	skb_dst_set_noref(skb, &rt->dst);
-+	nf_flow_table_acct(flow, skb, dir);
- 	neigh_xmit(NEIGH_ARP_TABLE, outdev, &nexthop, skb);
- 
- 	return NF_STOLEN;
-@@ -526,6 +528,7 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 	skb->dev = outdev;
- 	nexthop = rt6_nexthop(rt, &flow->tuplehash[!dir].tuple.src_v6);
- 	skb_dst_set_noref(skb, &rt->dst);
-+	nf_flow_table_acct(flow, skb, dir);
- 	neigh_xmit(NEIGH_ND_TABLE, outdev, nexthop, skb);
- 
- 	return NF_STOLEN;
diff --git a/target/linux/generic/hack-5.4/650-netfilter-add-xt_OFFLOAD-target.patch b/target/linux/generic/hack-5.4/650-netfilter-add-xt_OFFLOAD-target.patch
deleted file mode 100644
index d584cb5c6c..0000000000
--- a/target/linux/generic/hack-5.4/650-netfilter-add-xt_OFFLOAD-target.patch
+++ /dev/null
@@ -1,589 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 20 Feb 2018 15:56:02 +0100
-Subject: [PATCH] netfilter: add xt_OFFLOAD target
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- create mode 100644 net/netfilter/xt_OFFLOAD.c
-
---- a/net/ipv4/netfilter/Kconfig
-+++ b/net/ipv4/netfilter/Kconfig
-@@ -56,8 +56,6 @@ config NF_TABLES_ARP
- 	help
- 	  This option enables the ARP support for nf_tables.
- 
--endif # NF_TABLES
--
- config NF_FLOW_TABLE_IPV4
- 	tristate "Netfilter flow table IPv4 module"
- 	depends on NF_FLOW_TABLE
-@@ -66,6 +64,8 @@ config NF_FLOW_TABLE_IPV4
- 
- 	  To compile it as a module, choose M here.
- 
-+endif # NF_TABLES
-+
- config NF_DUP_IPV4
- 	tristate "Netfilter IPv4 packet duplication to alternate destination"
- 	depends on !NF_CONNTRACK || NF_CONNTRACK
---- a/net/ipv6/netfilter/Kconfig
-+++ b/net/ipv6/netfilter/Kconfig
-@@ -45,7 +45,6 @@ config NFT_FIB_IPV6
- 	  multicast or blackhole.
- 
- endif # NF_TABLES_IPV6
--endif # NF_TABLES
- 
- config NF_FLOW_TABLE_IPV6
- 	tristate "Netfilter flow table IPv6 module"
-@@ -55,6 +54,8 @@ config NF_FLOW_TABLE_IPV6
- 
- 	  To compile it as a module, choose M here.
- 
-+endif # NF_TABLES
-+
- config NF_DUP_IPV6
- 	tristate "Netfilter IPv6 packet duplication to alternate destination"
- 	depends on !NF_CONNTRACK || NF_CONNTRACK
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -690,8 +690,6 @@ config NFT_FIB_NETDEV
- 
- endif # NF_TABLES_NETDEV
- 
--endif # NF_TABLES
--
- config NF_FLOW_TABLE_INET
- 	tristate "Netfilter flow table mixed IPv4/IPv6 module"
- 	depends on NF_FLOW_TABLE
-@@ -700,11 +698,12 @@ config NF_FLOW_TABLE_INET
- 
- 	  To compile it as a module, choose M here.
- 
-+endif # NF_TABLES
-+
- config NF_FLOW_TABLE
- 	tristate "Netfilter flow table module"
- 	depends on NETFILTER_INGRESS
- 	depends on NF_CONNTRACK
--	depends on NF_TABLES
- 	help
- 	  This option adds the flow table core infrastructure.
- 
-@@ -993,6 +992,15 @@ config NETFILTER_XT_TARGET_NOTRACK
- 	depends on NETFILTER_ADVANCED
- 	select NETFILTER_XT_TARGET_CT
- 
-+config NETFILTER_XT_TARGET_FLOWOFFLOAD
-+	tristate '"FLOWOFFLOAD" target support'
-+	depends on NF_FLOW_TABLE
-+	depends on NETFILTER_INGRESS
-+	help
-+	  This option adds a `FLOWOFFLOAD' target, which uses the nf_flow_offload
-+	  module to speed up processing of packets by bypassing the usual
-+	  netfilter chains
-+
- config NETFILTER_XT_TARGET_RATEEST
- 	tristate '"RATEEST" target support'
- 	depends on NETFILTER_ADVANCED
---- a/net/netfilter/Makefile
-+++ b/net/netfilter/Makefile
-@@ -141,6 +141,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_CLASSIF
- obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_CT) += xt_CT.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
-+obj-$(CONFIG_NETFILTER_XT_TARGET_FLOWOFFLOAD) += xt_FLOWOFFLOAD.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_HMARK) += xt_HMARK.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
---- /dev/null
-+++ b/net/netfilter/xt_FLOWOFFLOAD.c
-@@ -0,0 +1,427 @@
-+/*
-+ * Copyright (C) 2018 Felix Fietkau <nbd@nbd.name>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/netfilter.h>
-+#include <linux/netfilter/xt_FLOWOFFLOAD.h>
-+#include <net/ip.h>
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_extend.h>
-+#include <net/netfilter/nf_conntrack_helper.h>
-+#include <net/netfilter/nf_flow_table.h>
-+
-+static struct nf_flowtable nf_flowtable;
-+static HLIST_HEAD(hooks);
-+static DEFINE_SPINLOCK(hooks_lock);
-+static struct delayed_work hook_work;
-+
-+struct xt_flowoffload_hook {
-+	struct hlist_node list;
-+	struct nf_hook_ops ops;
-+	struct net *net;
-+	bool registered;
-+	bool used;
-+};
-+
-+static unsigned int
-+xt_flowoffload_net_hook(void *priv, struct sk_buff *skb,
-+			  const struct nf_hook_state *state)
-+{
-+	switch (skb->protocol) {
-+	case htons(ETH_P_IP):
-+		return nf_flow_offload_ip_hook(priv, skb, state);
-+	case htons(ETH_P_IPV6):
-+		return nf_flow_offload_ipv6_hook(priv, skb, state);
-+	}
-+
-+	return NF_ACCEPT;
-+}
-+
-+int nf_flow_table_iterate(struct nf_flowtable *flow_table,
-+			   void (*iter)(struct flow_offload *flow, void *data),
-+			   void *data);
-+
-+static int
-+xt_flowoffload_create_hook(struct net_device *dev)
-+{
-+	struct xt_flowoffload_hook *hook;
-+	struct nf_hook_ops *ops;
-+
-+	hook = kzalloc(sizeof(*hook), GFP_ATOMIC);
-+	if (!hook)
-+		return -ENOMEM;
-+
-+	ops = &hook->ops;
-+	ops->pf = NFPROTO_NETDEV;
-+	ops->hooknum = NF_NETDEV_INGRESS;
-+	ops->priority = 10;
-+	ops->priv = &nf_flowtable;
-+	ops->hook = xt_flowoffload_net_hook;
-+	ops->dev = dev;
-+
-+	hlist_add_head(&hook->list, &hooks);
-+	mod_delayed_work(system_power_efficient_wq, &hook_work, 0);
-+
-+	return 0;
-+}
-+
-+static struct xt_flowoffload_hook *
-+flow_offload_lookup_hook(struct net_device *dev)
-+{
-+	struct xt_flowoffload_hook *hook;
-+
-+	hlist_for_each_entry(hook, &hooks, list) {
-+		if (hook->ops.dev == dev)
-+			return hook;
-+	}
-+
-+	return NULL;
-+}
-+
-+static void
-+xt_flowoffload_check_device(struct net_device *dev)
-+{
-+	struct xt_flowoffload_hook *hook;
-+
-+	spin_lock_bh(&hooks_lock);
-+	hook = flow_offload_lookup_hook(dev);
-+	if (hook)
-+		hook->used = true;
-+	else
-+		xt_flowoffload_create_hook(dev);
-+	spin_unlock_bh(&hooks_lock);
-+}
-+
-+static void
-+xt_flowoffload_register_hooks(void)
-+{
-+	struct xt_flowoffload_hook *hook;
-+
-+restart:
-+	hlist_for_each_entry(hook, &hooks, list) {
-+		if (hook->registered)
-+			continue;
-+
-+		hook->registered = true;
-+		hook->net = dev_net(hook->ops.dev);
-+		spin_unlock_bh(&hooks_lock);
-+		nf_register_net_hook(hook->net, &hook->ops);
-+		spin_lock_bh(&hooks_lock);
-+		goto restart;
-+	}
-+
-+}
-+
-+static void
-+xt_flowoffload_cleanup_hooks(void)
-+{
-+	struct xt_flowoffload_hook *hook;
-+
-+restart:
-+	hlist_for_each_entry(hook, &hooks, list) {
-+		if (hook->used || !hook->registered)
-+			continue;
-+
-+		hlist_del(&hook->list);
-+		spin_unlock_bh(&hooks_lock);
-+		nf_unregister_net_hook(hook->net, &hook->ops);
-+		kfree(hook);
-+		spin_lock_bh(&hooks_lock);
-+		goto restart;
-+	}
-+
-+}
-+
-+static void
-+xt_flowoffload_check_hook(struct flow_offload *flow, void *data)
-+{
-+	struct flow_offload_tuple *tuple = &flow->tuplehash[0].tuple;
-+	struct xt_flowoffload_hook *hook;
-+	bool *found = data;
-+	struct rtable *rt = (struct rtable *)tuple->dst_cache;
-+
-+	spin_lock_bh(&hooks_lock);
-+	hlist_for_each_entry(hook, &hooks, list) {
-+		if (hook->ops.dev->ifindex != tuple->iifidx &&
-+		    hook->ops.dev->ifindex != rt->dst.dev->ifindex)
-+			continue;
-+
-+		hook->used = true;
-+		*found = true;
-+	}
-+	spin_unlock_bh(&hooks_lock);
-+}
-+
-+static void
-+xt_flowoffload_hook_work(struct work_struct *work)
-+{
-+	struct xt_flowoffload_hook *hook;
-+	bool found = false;
-+	int err;
-+
-+	spin_lock_bh(&hooks_lock);
-+	xt_flowoffload_register_hooks();
-+	hlist_for_each_entry(hook, &hooks, list)
-+		hook->used = false;
-+	spin_unlock_bh(&hooks_lock);
-+
-+	err = nf_flow_table_iterate(&nf_flowtable, xt_flowoffload_check_hook,
-+				    &found);
-+	if (err && err != -EAGAIN)
-+	    goto out;
-+
-+	spin_lock_bh(&hooks_lock);
-+	xt_flowoffload_cleanup_hooks();
-+	spin_unlock_bh(&hooks_lock);
-+
-+out:
-+	if (found)
-+		queue_delayed_work(system_power_efficient_wq, &hook_work, HZ);
-+}
-+
-+static bool
-+xt_flowoffload_skip(struct sk_buff *skb, int family)
-+{
-+	if (skb_sec_path(skb))
-+		return true;
-+
-+	if (family == NFPROTO_IPV4) {
-+		const struct ip_options *opt = &(IPCB(skb)->opt);
-+
-+		if (unlikely(opt->optlen))
-+			return true;
-+	}
-+
-+	return false;
-+}
-+
-+static struct dst_entry *
-+xt_flowoffload_dst(const struct nf_conn *ct, enum ip_conntrack_dir dir,
-+		   const struct xt_action_param *par, int ifindex)
-+{
-+	struct dst_entry *dst = NULL;
-+	struct flowi fl;
-+
-+	memset(&fl, 0, sizeof(fl));
-+	switch (xt_family(par)) {
-+	case NFPROTO_IPV4:
-+		fl.u.ip4.daddr = ct->tuplehash[dir].tuple.src.u3.ip;
-+		fl.u.ip4.flowi4_oif = ifindex;
-+		break;
-+	case NFPROTO_IPV6:
-+		fl.u.ip6.saddr = ct->tuplehash[dir].tuple.dst.u3.in6;
-+		fl.u.ip6.daddr = ct->tuplehash[dir].tuple.src.u3.in6;
-+		fl.u.ip6.flowi6_oif = ifindex;
-+		break;
-+	}
-+
-+	nf_route(xt_net(par), &dst, &fl, false, xt_family(par));
-+
-+	return dst;
-+}
-+
-+static int
-+xt_flowoffload_route(struct sk_buff *skb, const struct nf_conn *ct,
-+		   const struct xt_action_param *par,
-+		   struct nf_flow_route *route, enum ip_conntrack_dir dir)
-+{
-+	struct dst_entry *this_dst, *other_dst;
-+
-+	this_dst = xt_flowoffload_dst(ct, !dir, par, xt_out(par)->ifindex);
-+	other_dst = xt_flowoffload_dst(ct, dir, par, xt_in(par)->ifindex);
-+
-+	route->tuple[dir].dst		= this_dst;
-+	route->tuple[!dir].dst		= other_dst;
-+
-+	if (!this_dst || !other_dst)
-+		return -ENOENT;
-+
-+	if (dst_xfrm(this_dst) || dst_xfrm(other_dst))
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+static unsigned int
-+flowoffload_tg(struct sk_buff *skb, const struct xt_action_param *par)
-+{
-+	const struct xt_flowoffload_target_info *info = par->targinfo;
-+	struct tcphdr _tcph, *tcph = NULL;
-+	enum ip_conntrack_info ctinfo;
-+	enum ip_conntrack_dir dir;
-+	struct nf_flow_route route;
-+	struct flow_offload *flow = NULL;
-+	struct nf_conn *ct;
-+	struct net *net;
-+
-+	if (xt_flowoffload_skip(skb, xt_family(par)))
-+		return XT_CONTINUE;
-+
-+	ct = nf_ct_get(skb, &ctinfo);
-+	if (ct == NULL)
-+		return XT_CONTINUE;
-+
-+	switch (ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.protonum) {
-+	case IPPROTO_TCP:
-+		if (ct->proto.tcp.state != TCP_CONNTRACK_ESTABLISHED)
-+			return XT_CONTINUE;
-+
-+		tcph = skb_header_pointer(skb, par->thoff,
-+					  sizeof(_tcph), &_tcph);
-+		if (unlikely(!tcph || tcph->fin || tcph->rst))
-+			return XT_CONTINUE;
-+		break;
-+	case IPPROTO_UDP:
-+		break;
-+	default:
-+		return XT_CONTINUE;
-+	}
-+
-+	if (nf_ct_ext_exist(ct, NF_CT_EXT_HELPER) ||
-+	    ct->status & IPS_SEQ_ADJUST)
-+		return XT_CONTINUE;
-+
-+	if (!nf_ct_is_confirmed(ct))
-+		return XT_CONTINUE;
-+
-+	if (!xt_in(par) || !xt_out(par))
-+		return XT_CONTINUE;
-+
-+	if (test_and_set_bit(IPS_OFFLOAD_BIT, &ct->status))
-+		return XT_CONTINUE;
-+
-+	dir = CTINFO2DIR(ctinfo);
-+
-+	if (xt_flowoffload_route(skb, ct, par, &route, dir) == 0)
-+		flow = flow_offload_alloc(ct, &route);
-+
-+	dst_release(route.tuple[dir].dst);
-+	dst_release(route.tuple[!dir].dst);
-+
-+	if (!flow)
-+		goto err_flow_route;
-+
-+	if (tcph) {
-+		ct->proto.tcp.seen[0].flags |= IP_CT_TCP_FLAG_BE_LIBERAL;
-+		ct->proto.tcp.seen[1].flags |= IP_CT_TCP_FLAG_BE_LIBERAL;
-+	}
-+
-+	if (flow_offload_add(&nf_flowtable, flow) < 0)
-+		goto err_flow_add;
-+
-+	xt_flowoffload_check_device(xt_in(par));
-+	xt_flowoffload_check_device(xt_out(par));
-+
-+	net = read_pnet(&nf_flowtable.ft_net);
-+	if (!net)
-+		write_pnet(&nf_flowtable.ft_net, xt_net(par));
-+
-+	if (info->flags & XT_FLOWOFFLOAD_HW)
-+		nf_flow_offload_hw_add(xt_net(par), flow, ct);
-+
-+	return XT_CONTINUE;
-+
-+err_flow_add:
-+	flow_offload_free(flow);
-+err_flow_route:
-+	clear_bit(IPS_OFFLOAD_BIT, &ct->status);
-+	return XT_CONTINUE;
-+}
-+
-+
-+static int flowoffload_chk(const struct xt_tgchk_param *par)
-+{
-+	struct xt_flowoffload_target_info *info = par->targinfo;
-+
-+	if (info->flags & ~XT_FLOWOFFLOAD_MASK)
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+static struct xt_target offload_tg_reg __read_mostly = {
-+	.family		= NFPROTO_UNSPEC,
-+	.name		= "FLOWOFFLOAD",
-+	.revision	= 0,
-+	.targetsize	= sizeof(struct xt_flowoffload_target_info),
-+	.usersize	= sizeof(struct xt_flowoffload_target_info),
-+	.checkentry	= flowoffload_chk,
-+	.target		= flowoffload_tg,
-+	.me		= THIS_MODULE,
-+};
-+
-+static int xt_flowoffload_table_init(struct nf_flowtable *table)
-+{
-+	table->flags = NF_FLOWTABLE_F_HW;
-+	nf_flow_table_init(table);
-+	return 0;
-+}
-+
-+static void xt_flowoffload_table_cleanup(struct nf_flowtable *table)
-+{
-+	nf_flow_table_free(table);
-+}
-+
-+static int flow_offload_netdev_event(struct notifier_block *this,
-+				     unsigned long event, void *ptr)
-+{
-+	struct xt_flowoffload_hook *hook = NULL;
-+	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-+
-+	if (event != NETDEV_UNREGISTER)
-+		return NOTIFY_DONE;
-+
-+	spin_lock_bh(&hooks_lock);
-+	hook = flow_offload_lookup_hook(dev);
-+	if (hook) {
-+		hlist_del(&hook->list);
-+	}
-+	spin_unlock_bh(&hooks_lock);
-+	if (hook) {
-+		nf_unregister_net_hook(hook->net, &hook->ops);
-+		kfree(hook);
-+	}
-+
-+	nf_flow_table_cleanup(dev);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block flow_offload_netdev_notifier = {
-+	.notifier_call	= flow_offload_netdev_event,
-+};
-+
-+static int __init xt_flowoffload_tg_init(void)
-+{
-+	int ret;
-+
-+	register_netdevice_notifier(&flow_offload_netdev_notifier);
-+
-+	INIT_DELAYED_WORK(&hook_work, xt_flowoffload_hook_work);
-+
-+	ret = xt_flowoffload_table_init(&nf_flowtable);
-+	if (ret)
-+		return ret;
-+
-+	ret = xt_register_target(&offload_tg_reg);
-+	if (ret)
-+		xt_flowoffload_table_cleanup(&nf_flowtable);
-+
-+	return ret;
-+}
-+
-+static void __exit xt_flowoffload_tg_exit(void)
-+{
-+	xt_unregister_target(&offload_tg_reg);
-+	xt_flowoffload_table_cleanup(&nf_flowtable);
-+	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
-+}
-+
-+MODULE_LICENSE("GPL");
-+module_init(xt_flowoffload_tg_init);
-+module_exit(xt_flowoffload_tg_exit);
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -7,7 +7,6 @@
- #include <linux/netdevice.h>
- #include <net/ip.h>
- #include <net/ip6_route.h>
--#include <net/netfilter/nf_tables.h>
- #include <net/netfilter/nf_flow_table.h>
- #include <net/netfilter/nf_conntrack.h>
- #include <net/netfilter/nf_conntrack_core.h>
-@@ -338,8 +337,7 @@ flow_offload_lookup(struct nf_flowtable
- }
- EXPORT_SYMBOL_GPL(flow_offload_lookup);
- 
--static int
--nf_flow_table_iterate(struct nf_flowtable *flow_table,
-+int nf_flow_table_iterate(struct nf_flowtable *flow_table,
- 		      void (*iter)(struct flow_offload *flow, void *data),
- 		      void *data)
- {
-@@ -372,6 +370,7 @@ nf_flow_table_iterate(struct nf_flowtabl
- 
- 	return err;
- }
-+EXPORT_SYMBOL_GPL(nf_flow_table_iterate);
- 
- static void nf_flow_offload_gc_step(struct flow_offload *flow, void *data)
- {
---- /dev/null
-+++ b/include/uapi/linux/netfilter/xt_FLOWOFFLOAD.h
-@@ -0,0 +1,17 @@
-+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-+#ifndef _XT_FLOWOFFLOAD_H
-+#define _XT_FLOWOFFLOAD_H
-+
-+#include <linux/types.h>
-+
-+enum {
-+	XT_FLOWOFFLOAD_HW	= 1 << 0,
-+
-+	XT_FLOWOFFLOAD_MASK	= XT_FLOWOFFLOAD_HW
-+};
-+
-+struct xt_flowoffload_target_info {
-+	__u32 flags;
-+};
-+
-+#endif /* _XT_FLOWOFFLOAD_H */
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -130,6 +130,10 @@ static inline void flow_offload_dead(str
- 	flow->flags |= FLOW_OFFLOAD_DYING;
- }
- 
-+int nf_flow_table_iterate(struct nf_flowtable *flow_table,
-+                      void (*iter)(struct flow_offload *flow, void *data),
-+                      void *data);
-+
- int nf_flow_snat_port(const struct flow_offload *flow,
- 		      struct sk_buff *skb, unsigned int thoff,
- 		      u8 protocol, enum flow_offload_tuple_dir dir);
diff --git a/target/linux/generic/hack-5.4/651-wireless_mesh_header.patch b/target/linux/generic/hack-5.4/651-wireless_mesh_header.patch
deleted file mode 100644
index f545d8ebbc..0000000000
--- a/target/linux/generic/hack-5.4/651-wireless_mesh_header.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 6d3bc769657b0ee7c7506dad9911111c4226a7ea Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Fri, 7 Jul 2017 17:21:05 +0200
-Subject: mac80211: increase wireless mesh header size
-
-lede-commit 3d4466cfd8f75f717efdb1f96fdde3c70d865fc1
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- include/linux/netdevice.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -138,8 +138,8 @@ static inline bool dev_xmit_complete(int
- 
- #if defined(CONFIG_HYPERV_NET)
- # define LL_MAX_HEADER 128
--#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25)
--# if defined(CONFIG_MAC80211_MESH)
-+#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25) || 1
-+# if defined(CONFIG_MAC80211_MESH) || 1
- #  define LL_MAX_HEADER 128
- # else
- #  define LL_MAX_HEADER 96
diff --git a/target/linux/generic/hack-5.4/660-fq_codel_defaults.patch b/target/linux/generic/hack-5.4/660-fq_codel_defaults.patch
deleted file mode 100644
index 46bf0e3b0b..0000000000
--- a/target/linux/generic/hack-5.4/660-fq_codel_defaults.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From a6ccb238939b25851474a279b20367fd24a0e816 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:21:53 +0200
-Subject:  hack: net: fq_codel: tune defaults for small devices
-
-Assume that x86_64 devices always have a big memory and do not need this 
-optimization compared to devices with only 32 MB or 64 MB RAM.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/sched/sch_fq_codel.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -470,7 +470,11 @@ static int fq_codel_init(struct Qdisc *s
- 
- 	sch->limit = 10*1024;
- 	q->flows_cnt = 1024;
-+#ifdef CONFIG_X86_64
- 	q->memory_limit = 32 << 20; /* 32 MBytes */
-+#else
-+	q->memory_limit = 4 << 20; /* 4 MBytes */
-+#endif
- 	q->drop_batch_size = 64;
- 	q->quantum = psched_mtu(qdisc_dev(sch));
- 	INIT_LIST_HEAD(&q->new_flows);
diff --git a/target/linux/generic/hack-5.4/661-use_fq_codel_by_default.patch b/target/linux/generic/hack-5.4/661-use_fq_codel_by_default.patch
deleted file mode 100644
index 11f1a25bce..0000000000
--- a/target/linux/generic/hack-5.4/661-use_fq_codel_by_default.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 1d418f7e88035ed7a94073f6354246c66e9193e9 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:22:58 +0200
-Subject: fq_codel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/net/sch_generic.h | 3 ++-
- net/sched/Kconfig         | 3 ++-
- net/sched/sch_api.c       | 2 +-
- net/sched/sch_fq_codel.c  | 3 ++-
- net/sched/sch_generic.c   | 4 ++--
- 5 files changed, 9 insertions(+), 6 deletions(-)
-
---- a/include/net/sch_generic.h
-+++ b/include/net/sch_generic.h
-@@ -617,12 +617,13 @@ extern struct Qdisc_ops noop_qdisc_ops;
- extern struct Qdisc_ops pfifo_fast_ops;
- extern struct Qdisc_ops mq_qdisc_ops;
- extern struct Qdisc_ops noqueue_qdisc_ops;
-+extern struct Qdisc_ops fq_codel_qdisc_ops;
- extern const struct Qdisc_ops *default_qdisc_ops;
- static inline const struct Qdisc_ops *
- get_default_qdisc_ops(const struct net_device *dev, int ntx)
- {
- 	return ntx < dev->real_num_tx_queues ?
--			default_qdisc_ops : &pfifo_fast_ops;
-+			default_qdisc_ops : &fq_codel_qdisc_ops;
- }
- 
- struct Qdisc_class_common {
---- a/net/sched/Kconfig
-+++ b/net/sched/Kconfig
-@@ -4,8 +4,9 @@
- #
- 
- menuconfig NET_SCHED
--	bool "QoS and/or fair queueing"
-+	def_bool y
- 	select NET_SCH_FIFO
-+	select NET_SCH_FQ_CODEL
- 	---help---
- 	  When the kernel has several packets to send out over a network
- 	  device, it has to decide which ones to send first, which ones to
---- a/net/sched/sch_api.c
-+++ b/net/sched/sch_api.c
-@@ -2278,7 +2278,7 @@ static int __init pktsched_init(void)
- 		return err;
- 	}
- 
--	register_qdisc(&pfifo_fast_ops);
-+	register_qdisc(&fq_codel_qdisc_ops);
- 	register_qdisc(&pfifo_qdisc_ops);
- 	register_qdisc(&bfifo_qdisc_ops);
- 	register_qdisc(&pfifo_head_drop_qdisc_ops);
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -710,7 +710,7 @@ static const struct Qdisc_class_ops fq_c
- 	.walk		=	fq_codel_walk,
- };
- 
--static struct Qdisc_ops fq_codel_qdisc_ops __read_mostly = {
-+struct Qdisc_ops fq_codel_qdisc_ops __read_mostly = {
- 	.cl_ops		=	&fq_codel_class_ops,
- 	.id		=	"fq_codel",
- 	.priv_size	=	sizeof(struct fq_codel_sched_data),
-@@ -725,6 +725,7 @@ static struct Qdisc_ops fq_codel_qdisc_o
- 	.dump_stats =	fq_codel_dump_stats,
- 	.owner		=	THIS_MODULE,
- };
-+EXPORT_SYMBOL(fq_codel_qdisc_ops);
- 
- static int __init fq_codel_module_init(void)
- {
---- a/net/sched/sch_generic.c
-+++ b/net/sched/sch_generic.c
-@@ -32,7 +32,7 @@
- #include <net/xfrm.h>
- 
- /* Qdisc to use by default */
--const struct Qdisc_ops *default_qdisc_ops = &pfifo_fast_ops;
-+const struct Qdisc_ops *default_qdisc_ops = &fq_codel_qdisc_ops;
- EXPORT_SYMBOL(default_qdisc_ops);
- 
- static void qdisc_maybe_clear_missed(struct Qdisc *q,
-@@ -1079,12 +1079,12 @@ static void attach_one_default_qdisc(str
- 				     void *_unused)
- {
- 	struct Qdisc *qdisc;
--	const struct Qdisc_ops *ops = default_qdisc_ops;
-+	const struct Qdisc_ops *ops = &fq_codel_qdisc_ops;
- 
- 	if (dev->priv_flags & IFF_NO_QUEUE)
- 		ops = &noqueue_qdisc_ops;
- 	else if(dev->type == ARPHRD_CAN)
--		ops = &pfifo_fast_ops;
-+		ops = &fq_codel_qdisc_ops;
- 
- 	qdisc = qdisc_create_dflt(dev_queue, ops, TC_H_ROOT, NULL);
- 	if (!qdisc) {
diff --git a/target/linux/generic/hack-5.4/662-remove_pfifo_fast.patch b/target/linux/generic/hack-5.4/662-remove_pfifo_fast.patch
deleted file mode 100644
index 9df3a8258d..0000000000
--- a/target/linux/generic/hack-5.4/662-remove_pfifo_fast.patch
+++ /dev/null
@@ -1,243 +0,0 @@
-From b531d492d5ef1cf9dba0f4888eb5fd8624a6d762 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:23:42 +0200
-Subject: net: sched: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/sched/sch_generic.c | 140 ------------------------------------------------
- 1 file changed, 140 deletions(-)
-
---- a/net/sched/sch_generic.c
-+++ b/net/sched/sch_generic.c
-@@ -620,230 +620,6 @@ struct Qdisc_ops noqueue_qdisc_ops __rea
- 	.owner		=	THIS_MODULE,
- };
- 
--static const u8 prio2band[TC_PRIO_MAX + 1] = {
--	1, 2, 2, 2, 1, 2, 0, 0 , 1, 1, 1, 1, 1, 1, 1, 1
--};
--
--/* 3-band FIFO queue: old style, but should be a bit faster than
--   generic prio+fifo combination.
-- */
--
--#define PFIFO_FAST_BANDS 3
--
--/*
-- * Private data for a pfifo_fast scheduler containing:
-- *	- rings for priority bands
-- */
--struct pfifo_fast_priv {
--	struct skb_array q[PFIFO_FAST_BANDS];
--};
--
--static inline struct skb_array *band2list(struct pfifo_fast_priv *priv,
--					  int band)
--{
--	return &priv->q[band];
--}
--
--static int pfifo_fast_enqueue(struct sk_buff *skb, struct Qdisc *qdisc,
--			      struct sk_buff **to_free)
--{
--	int band = prio2band[skb->priority & TC_PRIO_MAX];
--	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--	struct skb_array *q = band2list(priv, band);
--	unsigned int pkt_len = qdisc_pkt_len(skb);
--	int err;
--
--	err = skb_array_produce(q, skb);
--
--	if (unlikely(err)) {
--		if (qdisc_is_percpu_stats(qdisc))
--			return qdisc_drop_cpu(skb, qdisc, to_free);
--		else
--			return qdisc_drop(skb, qdisc, to_free);
--	}
--
--	qdisc_update_stats_at_enqueue(qdisc, pkt_len);
--	return NET_XMIT_SUCCESS;
--}
--
--static struct sk_buff *pfifo_fast_dequeue(struct Qdisc *qdisc)
--{
--	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--	struct sk_buff *skb = NULL;
--	bool need_retry = true;
--	int band;
--
--retry:
--	for (band = 0; band < PFIFO_FAST_BANDS && !skb; band++) {
--		struct skb_array *q = band2list(priv, band);
--
--		if (__skb_array_empty(q))
--			continue;
--
--		skb = __skb_array_consume(q);
--	}
--	if (likely(skb)) {
--		qdisc_update_stats_at_dequeue(qdisc, skb);
--	} else if (need_retry &&
--		   test_bit(__QDISC_STATE_MISSED, &qdisc->state)) {
--		/* Delay clearing the STATE_MISSED here to reduce
--		 * the overhead of the second spin_trylock() in
--		 * qdisc_run_begin() and __netif_schedule() calling
--		 * in qdisc_run_end().
--		 */
--		clear_bit(__QDISC_STATE_MISSED, &qdisc->state);
--
--		/* Make sure dequeuing happens after clearing
--		 * STATE_MISSED.
--		 */
--		smp_mb__after_atomic();
--
--		need_retry = false;
--
--		goto retry;
--	} else {
--		WRITE_ONCE(qdisc->empty, true);
--	}
--
--	return skb;
--}
--
--static struct sk_buff *pfifo_fast_peek(struct Qdisc *qdisc)
--{
--	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--	struct sk_buff *skb = NULL;
--	int band;
--
--	for (band = 0; band < PFIFO_FAST_BANDS && !skb; band++) {
--		struct skb_array *q = band2list(priv, band);
--
--		skb = __skb_array_peek(q);
--	}
--
--	return skb;
--}
--
--static void pfifo_fast_reset(struct Qdisc *qdisc)
--{
--	int i, band;
--	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--
--	for (band = 0; band < PFIFO_FAST_BANDS; band++) {
--		struct skb_array *q = band2list(priv, band);
--		struct sk_buff *skb;
--
--		/* NULL ring is possible if destroy path is due to a failed
--		 * skb_array_init() in pfifo_fast_init() case.
--		 */
--		if (!q->ring.queue)
--			continue;
--
--		while ((skb = __skb_array_consume(q)) != NULL)
--			kfree_skb(skb);
--	}
--
--	if (qdisc_is_percpu_stats(qdisc)) {
--		for_each_possible_cpu(i) {
--			struct gnet_stats_queue *q;
--
--			q = per_cpu_ptr(qdisc->cpu_qstats, i);
--			q->backlog = 0;
--			q->qlen = 0;
--		}
--	}
--}
--
--static int pfifo_fast_dump(struct Qdisc *qdisc, struct sk_buff *skb)
--{
--	struct tc_prio_qopt opt = { .bands = PFIFO_FAST_BANDS };
--
--	memcpy(&opt.priomap, prio2band, TC_PRIO_MAX + 1);
--	if (nla_put(skb, TCA_OPTIONS, sizeof(opt), &opt))
--		goto nla_put_failure;
--	return skb->len;
--
--nla_put_failure:
--	return -1;
--}
--
--static int pfifo_fast_init(struct Qdisc *qdisc, struct nlattr *opt,
--			   struct netlink_ext_ack *extack)
--{
--	unsigned int qlen = qdisc_dev(qdisc)->tx_queue_len;
--	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--	int prio;
--
--	/* guard against zero length rings */
--	if (!qlen)
--		return -EINVAL;
--
--	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
--		struct skb_array *q = band2list(priv, prio);
--		int err;
--
--		err = skb_array_init(q, qlen, GFP_KERNEL);
--		if (err)
--			return -ENOMEM;
--	}
--
--	/* Can by-pass the queue discipline */
--	qdisc->flags |= TCQ_F_CAN_BYPASS;
--	return 0;
--}
--
--static void pfifo_fast_destroy(struct Qdisc *sch)
--{
--	struct pfifo_fast_priv *priv = qdisc_priv(sch);
--	int prio;
--
--	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
--		struct skb_array *q = band2list(priv, prio);
--
--		/* NULL ring is possible if destroy path is due to a failed
--		 * skb_array_init() in pfifo_fast_init() case.
--		 */
--		if (!q->ring.queue)
--			continue;
--		/* Destroy ring but no need to kfree_skb because a call to
--		 * pfifo_fast_reset() has already done that work.
--		 */
--		ptr_ring_cleanup(&q->ring, NULL);
--	}
--}
--
--static int pfifo_fast_change_tx_queue_len(struct Qdisc *sch,
--					  unsigned int new_len)
--{
--	struct pfifo_fast_priv *priv = qdisc_priv(sch);
--	struct skb_array *bands[PFIFO_FAST_BANDS];
--	int prio;
--
--	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
--		struct skb_array *q = band2list(priv, prio);
--
--		bands[prio] = q;
--	}
--
--	return skb_array_resize_multiple(bands, PFIFO_FAST_BANDS, new_len,
--					 GFP_KERNEL);
--}
--
--struct Qdisc_ops pfifo_fast_ops __read_mostly = {
--	.id		=	"pfifo_fast",
--	.priv_size	=	sizeof(struct pfifo_fast_priv),
--	.enqueue	=	pfifo_fast_enqueue,
--	.dequeue	=	pfifo_fast_dequeue,
--	.peek		=	pfifo_fast_peek,
--	.init		=	pfifo_fast_init,
--	.destroy	=	pfifo_fast_destroy,
--	.reset		=	pfifo_fast_reset,
--	.dump		=	pfifo_fast_dump,
--	.change_tx_queue_len =  pfifo_fast_change_tx_queue_len,
--	.owner		=	THIS_MODULE,
--	.static_flags	=	TCQ_F_NOLOCK | TCQ_F_CPUSTATS,
--};
--EXPORT_SYMBOL(pfifo_fast_ops);
--
- struct Qdisc *qdisc_alloc(struct netdev_queue *dev_queue,
- 			  const struct Qdisc_ops *ops,
- 			  struct netlink_ext_ack *extack)
diff --git a/target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch b/target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch
deleted file mode 100644
index b954bbb63e..0000000000
--- a/target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From 36e516290611e613aa92996cb4339561452695b4 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:24:23 +0200
-Subject: net: swconfig: adds openwrt switch layer
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/net/phy/Kconfig   | 83 +++++++++++++++++++++++++++++++++++++++++++++++
- drivers/net/phy/Makefile  | 15 +++++++++
- include/uapi/linux/Kbuild |  1 +
- 3 files changed, 99 insertions(+)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -250,6 +250,81 @@ config LED_TRIGGER_PHY
- 		for any speed known to the PHY.
- 
- 
-+comment "Switch configuration API + drivers"
-+
-+config SWCONFIG
-+	tristate "Switch configuration API"
-+	---help---
-+	  Switch configuration API using netlink. This allows
-+	  you to configure the VLAN features of certain switches.
-+
-+config SWCONFIG_LEDS
-+	bool "Switch LED trigger support"
-+	depends on (SWCONFIG && LEDS_TRIGGERS)
-+
-+config ADM6996_PHY
-+	tristate "Driver for ADM6996 switches"
-+	select SWCONFIG
-+	---help---
-+	  Currently supports the ADM6996FC and ADM6996M switches.
-+	  Support for FC is very limited.
-+
-+config AR8216_PHY
-+	tristate "Driver for Atheros AR8216 switches"
-+	select ETHERNET_PACKET_MANGLE
-+	select SWCONFIG
-+
-+config AR8216_PHY_LEDS
-+	bool "Atheros AR8216 switch LED support"
-+	depends on (AR8216_PHY && LEDS_CLASS)
-+
-+source "drivers/net/phy/b53/Kconfig"
-+
-+config IP17XX_PHY
-+	tristate "Driver for IC+ IP17xx switches"
-+	select SWCONFIG
-+
-+config PSB6970_PHY
-+	tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
-+	select SWCONFIG
-+	select ETHERNET_PACKET_MANGLE
-+
-+config RTL8306_PHY
-+	tristate "Driver for Realtek RTL8306S switches"
-+	select SWCONFIG
-+
-+config RTL8366_SMI
-+	tristate "Driver for the RTL8366 SMI interface"
-+	depends on GPIOLIB
-+	---help---
-+	  This module implements the SMI interface protocol which is used
-+	  by some RTL8366 ethernet switch devices via the generic GPIO API.
-+
-+if RTL8366_SMI
-+
-+config RTL8366_SMI_DEBUG_FS
-+	bool "RTL8366 SMI interface debugfs support"
-+        depends on DEBUG_FS
-+        default n
-+
-+config RTL8366S_PHY
-+	tristate "Driver for the Realtek RTL8366S switch"
-+	select SWCONFIG
-+
-+config RTL8366RB_PHY
-+	tristate "Driver for the Realtek RTL8366RB switch"
-+	select SWCONFIG
-+
-+config RTL8367_PHY
-+	tristate "Driver for the Realtek RTL8367R/M switches"
-+	select SWCONFIG
-+
-+config RTL8367B_PHY
-+	tristate "Driver fot the Realtek RTL8367R-VB switch"
-+	select SWCONFIG
-+
-+endif # RTL8366_SMI
-+
- comment "MII PHY device drivers"
- 
- config SFP
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -22,6 +22,19 @@ libphy-$(CONFIG_LED_TRIGGER_PHY)	+= phy_
- obj-$(CONFIG_PHYLINK)		+= phylink.o
- obj-$(CONFIG_PHYLIB)		+= libphy.o
- 
-+obj-$(CONFIG_SWCONFIG)		+= swconfig.o
-+obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
-+obj-$(CONFIG_AR8216_PHY)	+= ar8216.o ar8327.o
-+obj-$(CONFIG_SWCONFIG_B53)	+= b53/
-+obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
-+obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
-+obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
-+obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
-+obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
-+obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
-+obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
-+obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
-+
- obj-$(CONFIG_MDIO_ASPEED)	+= mdio-aspeed.o
- obj-$(CONFIG_MDIO_BCM_IPROC)	+= mdio-bcm-iproc.o
- obj-$(CONFIG_MDIO_BCM_UNIMAC)	+= mdio-bcm-unimac.o
---- a/include/linux/platform_data/b53.h
-+++ b/include/linux/platform_data/b53.h
-@@ -29,6 +29,9 @@ struct b53_platform_data {
- 	u32 chip_id;
- 	u16 enabled_ports;
- 
-+	/* allow to specify an ethX alias */
-+	const char *alias;
-+
- 	/* only used by MMAP'd driver */
- 	unsigned big_endian:1;
- 	void __iomem *regs;
diff --git a/target/linux/generic/hack-5.4/703-add_vsc8504_support.patch b/target/linux/generic/hack-5.4/703-add_vsc8504_support.patch
deleted file mode 100644
index afb6ca6cf3..0000000000
--- a/target/linux/generic/hack-5.4/703-add_vsc8504_support.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From: Roman Kuzmitskii <damex.pp@icloud.com>
-Date: Thu, 05 Nov 2020 02:00:00 +0000
-Subject: [PATCH] net: phy: vitesse: add vsc8504 support
-
-This patch adds support for vsc8504 phy.
-That phy is changed owner:
- vitesse -> microsemi -> microchip
-So is its driver in kernel was changed and rewritten.
-
-there is no need to upstream this patch.
-this vsc8504 is supported by newer kernels out of box.
-support could be enabled by CONFIG_MICROSEMI_PHY.
-
-Tested-by: Johannes Kimmel <fff@bareminimum.eu>
-Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
---- a/drivers/net/phy/vitesse.c
-+++ b/drivers/net/phy/vitesse.c
-@@ -61,6 +61,7 @@
- 
- #define PHY_ID_VSC8234			0x000fc620
- #define PHY_ID_VSC8244			0x000fc6c0
-+#define PHY_ID_VSC8504			0x000704c2
- #define PHY_ID_VSC8572			0x000704d0
- #define PHY_ID_VSC8601			0x00070420
- #define PHY_ID_VSC7385			0x00070450
-@@ -292,6 +293,7 @@ static int vsc82xx_config_intr(struct ph
- 		err = phy_write(phydev, MII_VSC8244_IMASK,
- 			(phydev->drv->phy_id == PHY_ID_VSC8234 ||
- 			 phydev->drv->phy_id == PHY_ID_VSC8244 ||
-+			 phydev->drv->phy_id == PHY_ID_VSC8504 ||
- 			 phydev->drv->phy_id == PHY_ID_VSC8572 ||
- 			 phydev->drv->phy_id == PHY_ID_VSC8601) ?
- 				MII_VSC8244_IMASK_MASK :
-@@ -402,6 +404,15 @@ static struct phy_driver vsc82xx_driver[
- 	.ack_interrupt	= &vsc824x_ack_interrupt,
- 	.config_intr	= &vsc82xx_config_intr,
- }, {
-+	.phy_id         = PHY_ID_VSC8504,
-+	.name           = "Vitesse VSC8504",
-+	.phy_id_mask    = 0x000ffff0,
-+	/* PHY_GBIT_FEATURES */
-+	.config_init    = &vsc824x_config_init,
-+	.config_aneg    = &vsc82x4_config_aneg,
-+	.ack_interrupt  = &vsc824x_ack_interrupt,
-+	.config_intr    = &vsc82xx_config_intr,
-+}, {
- 	.phy_id         = PHY_ID_VSC8572,
- 	.name           = "Vitesse VSC8572",
- 	.phy_id_mask    = 0x000ffff0,
-@@ -488,6 +499,7 @@ module_phy_driver(vsc82xx_driver);
- static struct mdio_device_id __maybe_unused vitesse_tbl[] = {
- 	{ PHY_ID_VSC8234, 0x000ffff0 },
- 	{ PHY_ID_VSC8244, 0x000fffc0 },
-+	{ PHY_ID_VSC8504, 0x000ffff0 },
- 	{ PHY_ID_VSC8572, 0x000ffff0 },
- 	{ PHY_ID_VSC7385, 0x000ffff0 },
- 	{ PHY_ID_VSC7388, 0x000ffff0 },
diff --git a/target/linux/generic/hack-5.4/710-net-dsa-mv88e6xxx-default-VID-1.patch b/target/linux/generic/hack-5.4/710-net-dsa-mv88e6xxx-default-VID-1.patch
deleted file mode 100644
index 5dc5ac6825..0000000000
--- a/target/linux/generic/hack-5.4/710-net-dsa-mv88e6xxx-default-VID-1.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -1930,6 +1930,7 @@ static int mv88e6xxx_port_fdb_add(struct
- 	struct mv88e6xxx_chip *chip = ds->priv;
- 	int err;
- 
-+	vid = vid ? : 1;
- 	mv88e6xxx_reg_lock(chip);
- 	err = mv88e6xxx_port_db_load_purge(chip, port, addr, vid,
- 					   MV88E6XXX_G1_ATU_DATA_STATE_UC_STATIC);
-@@ -1944,6 +1945,7 @@ static int mv88e6xxx_port_fdb_del(struct
- 	struct mv88e6xxx_chip *chip = ds->priv;
- 	int err;
- 
-+	vid = vid ? : 1;
- 	mv88e6xxx_reg_lock(chip);
- 	err = mv88e6xxx_port_db_load_purge(chip, port, addr, vid, 0);
- 	mv88e6xxx_reg_unlock(chip);
diff --git a/target/linux/generic/hack-5.4/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch b/target/linux/generic/hack-5.4/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch
deleted file mode 100644
index 1da388c862..0000000000
--- a/target/linux/generic/hack-5.4/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -2492,6 +2492,9 @@ static int mv88e6xxx_setup_port(struct m
- 	if (dsa_is_cpu_port(ds, port))
- 		reg = 0;
- 
-+	/* Disable ATU member violation interrupt */
-+	reg |= MV88E6XXX_PORT_ASSOC_VECTOR_IGNORE_WRONG;
-+
- 	err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_ASSOC_VECTOR,
- 				   reg);
- 	if (err)
diff --git a/target/linux/generic/hack-5.4/721-phy_packets.patch b/target/linux/generic/hack-5.4/721-phy_packets.patch
deleted file mode 100644
index 89ff8ea41a..0000000000
--- a/target/linux/generic/hack-5.4/721-phy_packets.patch
+++ /dev/null
@@ -1,176 +0,0 @@
-From ffe387740bbe88dd88bbe04d6375902708003d6e Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:25:00 +0200
-Subject: net: add packet mangeling patch
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/netdevice.h | 11 +++++++++++
- include/linux/skbuff.h    | 14 ++++----------
- net/Kconfig               |  6 ++++++
- net/core/dev.c            | 18 ++++++++++++++----
- net/core/skbuff.c         | 17 +++++++++++++++++
- net/ethernet/eth.c        |  6 ++++++
- 6 files changed, 58 insertions(+), 14 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -1540,6 +1540,7 @@ enum netdev_priv_flags {
- 	IFF_FAILOVER_SLAVE		= 1<<28,
- 	IFF_L3MDEV_RX_HANDLER		= 1<<29,
- 	IFF_LIVE_RENAME_OK		= 1<<30,
-+	IFF_NO_IP_ALIGN			= 1<<31,
- };
- 
- #define IFF_802_1Q_VLAN			IFF_802_1Q_VLAN
-@@ -1572,6 +1573,7 @@ enum netdev_priv_flags {
- #define IFF_FAILOVER_SLAVE		IFF_FAILOVER_SLAVE
- #define IFF_L3MDEV_RX_HANDLER		IFF_L3MDEV_RX_HANDLER
- #define IFF_LIVE_RENAME_OK		IFF_LIVE_RENAME_OK
-+#define IFF_NO_IP_ALIGN			IFF_NO_IP_ALIGN
- 
- /* Specifies the type of the struct net_device::ml_priv pointer */
- enum netdev_ml_priv_type {
-@@ -1882,6 +1884,11 @@ struct net_device {
- 	const struct tlsdev_ops *tlsdev_ops;
- #endif
- 
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	void (*eth_mangle_rx)(struct net_device *dev, struct sk_buff *skb);
-+	struct sk_buff *(*eth_mangle_tx)(struct net_device *dev, struct sk_buff *skb);
-+#endif
-+
- 	const struct header_ops *header_ops;
- 
- 	unsigned int		flags;
-@@ -1964,6 +1971,10 @@ struct net_device {
- 	struct mpls_dev __rcu	*mpls_ptr;
- #endif
- 
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	void			*phy_ptr; /* PHY device specific data */
-+#endif
-+
- /*
-  * Cache lines mostly used on receive path (including eth_type_trans())
-  */
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -2684,6 +2684,10 @@ static inline int pskb_trim(struct sk_bu
- 	return (len < skb->len) ? __pskb_trim(skb, len) : 0;
- }
- 
-+extern struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-+		unsigned int length, gfp_t gfp);
-+
-+
- /**
-  *	pskb_trim_unique - remove end from a paged unique (not cloned) buffer
-  *	@skb: buffer to alter
-@@ -2815,16 +2819,6 @@ static inline struct sk_buff *dev_alloc_
- }
- 
- 
--static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
--		unsigned int length, gfp_t gfp)
--{
--	struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
--
--	if (NET_IP_ALIGN && skb)
--		skb_reserve(skb, NET_IP_ALIGN);
--	return skb;
--}
--
- static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
- 		unsigned int length)
- {
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -26,6 +26,12 @@ menuconfig NET
- 
- if NET
- 
-+config ETHERNET_PACKET_MANGLE
-+	bool
-+	help
-+	  This option can be selected by phy drivers that need to mangle
-+	  packets going in or out of an ethernet device.
-+
- config WANT_COMPAT_NETLINK_MESSAGES
- 	bool
- 	help
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -3221,10 +3221,20 @@ static int xmit_one(struct sk_buff *skb,
- 	if (dev_nit_active(dev))
- 		dev_queue_xmit_nit(skb, dev);
- 
--	len = skb->len;
--	trace_net_dev_start_xmit(skb, dev);
--	rc = netdev_start_xmit(skb, dev, txq, more);
--	trace_net_dev_xmit(skb, rc, dev, len);
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	if (!dev->eth_mangle_tx ||
-+	    (skb = dev->eth_mangle_tx(dev, skb)) != NULL)
-+#else
-+	if (1)
-+#endif
-+	{
-+		len = skb->len;
-+		trace_net_dev_start_xmit(skb, dev);
-+		rc = netdev_start_xmit(skb, dev, txq, more);
-+		trace_net_dev_xmit(skb, rc, dev, len);
-+	} else {
-+		rc = NETDEV_TX_OK;
-+	}
- 
- 	return rc;
- }
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -60,6 +60,7 @@
- #include <linux/prefetch.h>
- #include <linux/if_vlan.h>
- #include <linux/mpls.h>
-+#include <linux/if.h>
- 
- #include <net/protocol.h>
- #include <net/dst.h>
-@@ -549,6 +550,22 @@ skb_fail:
- }
- EXPORT_SYMBOL(__napi_alloc_skb);
- 
-+struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-+		unsigned int length, gfp_t gfp)
-+{
-+	struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
-+
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	if (dev && (dev->priv_flags & IFF_NO_IP_ALIGN))
-+		return skb;
-+#endif
-+
-+	if (NET_IP_ALIGN && skb)
-+		skb_reserve(skb, NET_IP_ALIGN);
-+	return skb;
-+}
-+EXPORT_SYMBOL(__netdev_alloc_skb_ip_align);
-+
- void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, int off,
- 		     int size, unsigned int truesize)
- {
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -171,6 +171,12 @@ __be16 eth_type_trans(struct sk_buff *sk
- 	const struct ethhdr *eth;
- 
- 	skb->dev = dev;
-+
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	if (dev->eth_mangle_rx)
-+		dev->eth_mangle_rx(dev, skb);
-+#endif
-+
- 	skb_reset_mac_header(skb);
- 
- 	eth = (struct ethhdr *)skb->data;
diff --git a/target/linux/generic/hack-5.4/760-net-usb-r8152-add-LED-configuration-from-OF.patch b/target/linux/generic/hack-5.4/760-net-usb-r8152-add-LED-configuration-from-OF.patch
deleted file mode 100644
index a96661c968..0000000000
--- a/target/linux/generic/hack-5.4/760-net-usb-r8152-add-LED-configuration-from-OF.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 26 Jul 2020 02:38:31 +0200
-Subject: [PATCH] net: usb: r8152: add LED configuration from OF
-
-This adds the ability to configure the LED configuration register using
-OF. This way, the correct value for board specific LED configuration can
-be determined.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -11,6 +11,7 @@
- #include <linux/mii.h>
- #include <linux/ethtool.h>
- #include <linux/usb.h>
-+#include <linux/of.h>
- #include <linux/crc32.h>
- #include <linux/if_vlan.h>
- #include <linux/uaccess.h>
-@@ -4336,6 +4337,22 @@ static void rtl_tally_reset(struct r8152
- 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
- }
- 
-+static int r8152_led_configuration(struct r8152 *tp)
-+{
-+	u32 led_data;
-+	int ret;
-+
-+	ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data",
-+								&led_data);
-+
-+	if (ret)
-+		return ret;
-+	
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data);
-+
-+	return 0;
-+}
-+
- static void r8152b_init(struct r8152 *tp)
- {
- 	u32 ocp_data;
-@@ -4377,6 +4394,8 @@ static void r8152b_init(struct r8152 *tp
- 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
- 	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
- 	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+
-+	r8152_led_configuration(tp);
- }
- 
- static void r8153_init(struct r8152 *tp)
-@@ -4511,6 +4530,8 @@ static void r8153_init(struct r8152 *tp)
- 		tp->coalesce = COALESCE_SLOW;
- 		break;
- 	}
-+
-+	r8152_led_configuration(tp);
- }
- 
- static void r8153b_init(struct r8152 *tp)
-@@ -4587,6 +4608,8 @@ static void r8153b_init(struct r8152 *tp
- 	rtl_tally_reset(tp);
- 
- 	tp->coalesce = 15000;	/* 15 us */
-+
-+	r8152_led_configuration(tp);
- }
- 
- static int rtl8152_pre_reset(struct usb_interface *intf)
diff --git a/target/linux/generic/hack-5.4/761-dt-bindings-net-add-RTL8152-binding-documentation.patch b/target/linux/generic/hack-5.4/761-dt-bindings-net-add-RTL8152-binding-documentation.patch
deleted file mode 100644
index be262b993c..0000000000
--- a/target/linux/generic/hack-5.4/761-dt-bindings-net-add-RTL8152-binding-documentation.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 3ee05f4aa64fc86af3be5bc176ba5808de9260a7 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 26 Jul 2020 15:30:33 +0200
-Subject: [PATCH] dt-bindings: net: add RTL8152 binding documentation
-
-Add binding documentation for the Realtek RTL8152 / RTL8153 USB ethernet
-adapters.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- .../bindings/net/realtek,rtl8152.yaml         | 36 +++++++++++++++++++
- 1 file changed, 36 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
-@@ -0,0 +1,36 @@
-+# SPDX-License-Identifier: GPL-2.0
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/net/realtek,rtl8152.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Realtek RTL8152/RTL8153 series USB ethernet
-+
-+maintainers:
-+  - David Bauer <mail@david-bauer.net>
-+
-+properties:
-+  compatible:
-+    oneOf:
-+      - items:
-+          - enum:
-+              - realtek,rtl8152
-+              - realtek,rtl8153
-+
-+  reg:
-+    description: The device number on the USB bus
-+
-+  realtek,led-data:
-+    description: Value to be written to the LED configuration register.
-+
-+required:
-+  - compatible
-+  - reg
-+
-+examples:
-+  - |
-+    usb-eth@2 {
-+      compatible = "realtek,rtl8153";
-+      reg = <2>;
-+      realtek,led-data = <0x87>;
-+    };
-\ No newline at end of file
diff --git a/target/linux/generic/hack-5.4/773-bgmac-add-srab-switch.patch b/target/linux/generic/hack-5.4/773-bgmac-add-srab-switch.patch
deleted file mode 100644
index 88109ac8b0..0000000000
--- a/target/linux/generic/hack-5.4/773-bgmac-add-srab-switch.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 3cb240533ab787899dc7f17aa7d6c5b4810e2e58 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 7 Jul 2017 17:26:01 +0200
-Subject: bcm53xx: bgmac: use srab switch driver
-
-use the srab switch driver on these SoCs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/net/ethernet/broadcom/bgmac-bcma.c |  1 +
- drivers/net/ethernet/broadcom/bgmac.c      | 24 ++++++++++++++++++++++++
- drivers/net/ethernet/broadcom/bgmac.h      |  4 ++++
- 3 files changed, 29 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
-@@ -266,6 +266,7 @@ static int bgmac_probe(struct bcma_devic
- 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
- 		bgmac->feature_flags |= BGMAC_FEAT_NO_RESET;
- 		bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500;
-+		bgmac->feature_flags |= BGMAC_FEAT_SRAB;
- 		break;
- 	default:
- 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -12,6 +12,7 @@
- #include <linux/bcma/bcma.h>
- #include <linux/etherdevice.h>
- #include <linux/interrupt.h>
-+#include <linux/platform_data/b53.h>
- #include <linux/bcm47xx_nvram.h>
- #include <linux/phy.h>
- #include <linux/phy_fixed.h>
-@@ -1407,6 +1408,17 @@ static const struct ethtool_ops bgmac_et
- 	.set_link_ksettings     = phy_ethtool_set_link_ksettings,
- };
- 
-+static struct b53_platform_data bgmac_b53_pdata = {
-+};
-+
-+static struct platform_device bgmac_b53_dev = {
-+	.name		= "b53-srab-switch",
-+	.id		= -1,
-+	.dev		= {
-+		.platform_data = &bgmac_b53_pdata,
-+	},
-+};
-+
- /**************************************************
-  * MII
-  **************************************************/
-@@ -1538,6 +1550,14 @@ int bgmac_enet_probe(struct bgmac *bgmac
- 	net_dev->hw_features = net_dev->features;
- 	net_dev->vlan_features = net_dev->features;
- 
-+	if ((bgmac->feature_flags & BGMAC_FEAT_SRAB) && !bgmac_b53_pdata.regs) {
-+		bgmac_b53_pdata.regs = ioremap_nocache(0x18007000, 0x1000);
-+
-+		err = platform_device_register(&bgmac_b53_dev);
-+		if (!err)
-+			bgmac->b53_device = &bgmac_b53_dev;
-+	}
-+
- 	err = register_netdev(bgmac->net_dev);
- 	if (err) {
- 		dev_err(bgmac->dev, "Cannot register net device\n");
-@@ -1560,6 +1580,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
- 
- void bgmac_enet_remove(struct bgmac *bgmac)
- {
-+	if (bgmac->b53_device)
-+		platform_device_unregister(&bgmac_b53_dev);
-+	bgmac->b53_device = NULL;
-+
- 	unregister_netdev(bgmac->net_dev);
- 	phy_disconnect(bgmac->net_dev->phydev);
- 	netif_napi_del(&bgmac->napi);
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -427,6 +427,7 @@
- #define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII	BIT(18)
- #define BGMAC_FEAT_CC7_IF_TYPE_RGMII	BIT(19)
- #define BGMAC_FEAT_IDM_MASK		BIT(20)
-+#define BGMAC_FEAT_SRAB			BIT(21)
- 
- struct bgmac_slot_info {
- 	union {
-@@ -532,6 +533,9 @@ struct bgmac {
- 	void (*cmn_maskset32)(struct bgmac *bgmac, u16 offset, u32 mask,
- 			      u32 set);
- 	int (*phy_connect)(struct bgmac *bgmac);
-+
-+	/* platform device for associated switch */
-+	struct platform_device *b53_device;
- };
- 
- struct bgmac *bgmac_alloc(struct device *dev);
diff --git a/target/linux/generic/hack-5.4/901-debloat_sock_diag.patch b/target/linux/generic/hack-5.4/901-debloat_sock_diag.patch
deleted file mode 100644
index 0abb672639..0000000000
--- a/target/linux/generic/hack-5.4/901-debloat_sock_diag.patch
+++ /dev/null
@@ -1,145 +0,0 @@
-From 3b6115d6b57a263bdc8c9b1df273bd4a7955eead Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:16:31 +0200
-Subject: debloat: add some debloat patches, strip down procfs and make O_DIRECT support optional, saves ~15K after lzma on MIPS
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/Kconfig         | 3 +++
- net/core/Makefile   | 3 ++-
- net/core/sock.c     | 2 ++
- net/ipv4/Kconfig    | 1 +
- net/netlink/Kconfig | 1 +
- net/packet/Kconfig  | 1 +
- net/unix/Kconfig    | 1 +
- 7 files changed, 11 insertions(+), 1 deletion(-)
-
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -103,6 +103,9 @@ source "net/netlabel/Kconfig"
- 
- endif # if INET
- 
-+config SOCK_DIAG
-+	bool
-+
- config NETWORK_SECMARK
- 	bool "Security Marking"
- 	help
---- a/net/core/Makefile
-+++ b/net/core/Makefile
-@@ -10,9 +10,10 @@ obj-$(CONFIG_SYSCTL) += sysctl_net_core.
- 
- obj-y		     += dev.o ethtool.o dev_addr_lists.o dst.o netevent.o \
- 			neighbour.o rtnetlink.o utils.o link_watch.o filter.o \
--			sock_diag.o dev_ioctl.o tso.o sock_reuseport.o \
-+ 			dev_ioctl.o tso.o sock_reuseport.o \
- 			fib_notifier.o xdp.o flow_offload.o
- 
-+obj-$(CONFIG_SOCK_DIAG) += sock_diag.o
- obj-y += net-sysfs.o
- obj-$(CONFIG_PAGE_POOL) += page_pool.o
- obj-$(CONFIG_PROC_FS) += net-procfs.o
---- a/net/core/sock.c
-+++ b/net/core/sock.c
-@@ -140,6 +140,7 @@
- 
- static DEFINE_MUTEX(proto_list_mutex);
- static LIST_HEAD(proto_list);
-+static atomic64_t cookie_gen;
- 
- static void sock_inuse_add(struct net *net, int val);
- 
-@@ -539,6 +540,18 @@ discard_and_relse:
- }
- EXPORT_SYMBOL(__sk_receive_skb);
- 
-+u64 sock_gen_cookie(struct sock *sk)
-+{
-+	while (1) {
-+		u64 res = atomic64_read(&sk->sk_cookie);
-+
-+		if (res)
-+			return res;
-+		res = atomic64_inc_return(&cookie_gen);
-+		atomic64_cmpxchg(&sk->sk_cookie, 0, res);
-+	}
-+}
-+
- struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie)
- {
- 	struct dst_entry *dst = __sk_dst_get(sk);
-@@ -1760,9 +1773,11 @@ static void __sk_free(struct sock *sk)
- 	if (likely(sk->sk_net_refcnt))
- 		sock_inuse_add(sock_net(sk), -1);
- 
-+#ifdef CONFIG_SOCK_DIAG
- 	if (unlikely(sk->sk_net_refcnt && sock_diag_has_destroy_listeners(sk)))
- 		sock_diag_broadcast_destroy(sk);
- 	else
-+#endif
- 		sk_destruct(sk);
- }
- 
---- a/net/core/sock_diag.c
-+++ b/net/core/sock_diag.c
-@@ -19,19 +19,6 @@ static const struct sock_diag_handler *s
- static int (*inet_rcv_compat)(struct sk_buff *skb, struct nlmsghdr *nlh);
- static DEFINE_MUTEX(sock_diag_table_mutex);
- static struct workqueue_struct *broadcast_wq;
--static atomic64_t cookie_gen;
--
--u64 sock_gen_cookie(struct sock *sk)
--{
--	while (1) {
--		u64 res = atomic64_read(&sk->sk_cookie);
--
--		if (res)
--			return res;
--		res = atomic64_inc_return(&cookie_gen);
--		atomic64_cmpxchg(&sk->sk_cookie, 0, res);
--	}
--}
- 
- int sock_diag_check_cookie(struct sock *sk, const __u32 *cookie)
- {
---- a/net/ipv4/Kconfig
-+++ b/net/ipv4/Kconfig
-@@ -400,6 +400,7 @@ config INET_TUNNEL
- 
- config INET_DIAG
- 	tristate "INET: socket monitoring interface"
-+	select SOCK_DIAG
- 	default y
- 	---help---
- 	  Support for INET (TCP, DCCP, etc) socket monitoring interface used by
---- a/net/netlink/Kconfig
-+++ b/net/netlink/Kconfig
-@@ -5,6 +5,7 @@
- 
- config NETLINK_DIAG
- 	tristate "NETLINK: socket monitoring interface"
-+	select SOCK_DIAG
- 	default n
- 	---help---
- 	  Support for NETLINK socket monitoring interface used by the ss tool.
---- a/net/packet/Kconfig
-+++ b/net/packet/Kconfig
-@@ -19,6 +19,7 @@ config PACKET
- config PACKET_DIAG
- 	tristate "Packet: sockets monitoring interface"
- 	depends on PACKET
-+	select SOCK_DIAG
- 	default n
- 	---help---
- 	  Support for PF_PACKET sockets monitoring interface used by the ss tool.
---- a/net/unix/Kconfig
-+++ b/net/unix/Kconfig
-@@ -28,6 +28,7 @@ config UNIX_SCM
- config UNIX_DIAG
- 	tristate "UNIX: socket monitoring interface"
- 	depends on UNIX
-+	select SOCK_DIAG
- 	default n
- 	---help---
- 	  Support for UNIX socket monitoring interface used by the ss tool.
diff --git a/target/linux/generic/hack-5.4/902-debloat_proc.patch b/target/linux/generic/hack-5.4/902-debloat_proc.patch
deleted file mode 100644
index 198b03768b..0000000000
--- a/target/linux/generic/hack-5.4/902-debloat_proc.patch
+++ /dev/null
@@ -1,408 +0,0 @@
-From 9e3f1d0805b2d919904dd9a4ff0d956314cc3cba Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:20:09 +0200
-Subject: debloat: procfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- fs/locks.c               |  2 ++
- fs/proc/Kconfig          |  5 +++++
- fs/proc/consoles.c       |  3 +++
- fs/proc/proc_tty.c       | 11 ++++++++++-
- include/net/snmp.h       | 18 +++++++++++++++++-
- ipc/msg.c                |  3 +++
- ipc/sem.c                |  2 ++
- ipc/shm.c                |  2 ++
- ipc/util.c               |  3 +++
- kernel/exec_domain.c     |  2 ++
- kernel/irq/proc.c        |  9 +++++++++
- kernel/time/timer_list.c |  2 ++
- mm/vmalloc.c             |  2 ++
- mm/vmstat.c              |  8 +++++---
- net/8021q/vlanproc.c     |  6 ++++++
- net/core/net-procfs.c    | 18 ++++++++++++------
- net/core/sock.c          |  2 ++
- net/ipv4/fib_trie.c      | 18 ++++++++++++------
- net/ipv4/proc.c          |  3 +++
- net/ipv4/route.c         |  3 +++
- 20 files changed, 105 insertions(+), 17 deletions(-)
-
---- a/fs/locks.c
-+++ b/fs/locks.c
-@@ -2989,6 +2989,8 @@ static const struct seq_operations locks
- 
- static int __init proc_locks_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	proc_create_seq_private("locks", 0, NULL, &locks_seq_operations,
- 			sizeof(struct locks_iterator), NULL);
- 	return 0;
---- a/fs/proc/Kconfig
-+++ b/fs/proc/Kconfig
-@@ -100,6 +100,11 @@ config PROC_CHILDREN
- 	  Say Y if you are running any user-space software which takes benefit from
- 	  this interface. For example, rkt is such a piece of software.
- 
-+config PROC_STRIPPED
-+	default n
-+	depends on EXPERT
-+	bool "Strip non-essential /proc functionality to reduce code size"
-+
- config PROC_PID_ARCH_STATUS
- 	def_bool n
- 	depends on PROC_FS
---- a/fs/proc/consoles.c
-+++ b/fs/proc/consoles.c
-@@ -92,6 +92,9 @@ static const struct seq_operations conso
- 
- static int __init proc_consoles_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	proc_create_seq("consoles", 0, NULL, &consoles_op);
- 	return 0;
- }
---- a/fs/proc/proc_tty.c
-+++ b/fs/proc/proc_tty.c
-@@ -133,7 +133,10 @@ static const struct seq_operations tty_d
- void proc_tty_register_driver(struct tty_driver *driver)
- {
- 	struct proc_dir_entry *ent;
--		
-+
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	if (!driver->driver_name || driver->proc_entry ||
- 	    !driver->ops->proc_show)
- 		return;
-@@ -150,6 +153,9 @@ void proc_tty_unregister_driver(struct t
- {
- 	struct proc_dir_entry *ent;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	ent = driver->proc_entry;
- 	if (!ent)
- 		return;
-@@ -164,6 +170,9 @@ void proc_tty_unregister_driver(struct t
-  */
- void __init proc_tty_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	if (!proc_mkdir("tty", NULL))
- 		return;
- 	proc_mkdir("tty/ldisc", NULL);	/* Preserved: it's userspace visible */
---- a/include/net/snmp.h
-+++ b/include/net/snmp.h
-@@ -118,6 +118,21 @@ struct linux_xfrm_mib {
- #define DECLARE_SNMP_STAT(type, name)	\
- 	extern __typeof__(type) __percpu *name
- 
-+#ifdef CONFIG_PROC_STRIPPED
-+#define __SNMP_STATS_DUMMY(mib)	\
-+	do { (void) mib->mibs[0]; } while(0)
-+
-+#define __SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_INC_STATS_ATOMIC_LONG(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_DEC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define __SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib)
-+#define __SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib)
-+
-+#else
-+
- #define __SNMP_INC_STATS(mib, field)	\
- 			__this_cpu_inc(mib->mibs[field])
- 
-@@ -148,8 +163,9 @@ struct linux_xfrm_mib {
- 		__this_cpu_add(ptr[basefield##OCTETS], addend);	\
- 	} while (0)
- 
-+#endif
- 
--#if BITS_PER_LONG==32
-+#if (BITS_PER_LONG==32) && !defined(CONFIG_PROC_STRIPPED)
- 
- #define __SNMP_ADD_STATS64(mib, field, addend) 				\
- 	do {								\
---- a/ipc/msg.c
-+++ b/ipc/msg.c
-@@ -1317,6 +1317,9 @@ void __init msg_init(void)
- {
- 	msg_init_ns(&init_ipc_ns);
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	ipc_init_proc_interface("sysvipc/msg",
- 				"       key      msqid perms      cbytes       qnum lspid lrpid   uid   gid  cuid  cgid      stime      rtime      ctime\n",
- 				IPC_MSG_IDS, sysvipc_msg_proc_show);
---- a/ipc/sem.c
-+++ b/ipc/sem.c
-@@ -243,6 +243,8 @@ void sem_exit_ns(struct ipc_namespace *n
- void __init sem_init(void)
- {
- 	sem_init_ns(&init_ipc_ns);
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
- 	ipc_init_proc_interface("sysvipc/sem",
- 				"       key      semid perms      nsems   uid   gid  cuid  cgid      otime      ctime\n",
- 				IPC_SEM_IDS, sysvipc_sem_proc_show);
---- a/ipc/shm.c
-+++ b/ipc/shm.c
-@@ -154,6 +154,8 @@ pure_initcall(ipc_ns_init);
- 
- void __init shm_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
- 	ipc_init_proc_interface("sysvipc/shm",
- #if BITS_PER_LONG <= 32
- 				"       key      shmid perms       size  cpid  lpid nattch   uid   gid  cuid  cgid      atime      dtime      ctime        rss       swap\n",
---- a/ipc/util.c
-+++ b/ipc/util.c
-@@ -140,6 +140,9 @@ void __init ipc_init_proc_interface(cons
- 	struct proc_dir_entry *pde;
- 	struct ipc_proc_iface *iface;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	iface = kmalloc(sizeof(*iface), GFP_KERNEL);
- 	if (!iface)
- 		return;
---- a/kernel/exec_domain.c
-+++ b/kernel/exec_domain.c
-@@ -29,6 +29,8 @@ static int execdomains_proc_show(struct
- 
- static int __init proc_execdomains_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	proc_create_single("execdomains", 0, NULL, execdomains_proc_show);
- 	return 0;
- }
---- a/kernel/irq/proc.c
-+++ b/kernel/irq/proc.c
-@@ -341,6 +341,9 @@ void register_irq_proc(unsigned int irq,
- 	void __maybe_unused *irqp = (void *)(unsigned long) irq;
- 	char name [MAX_NAMELEN];
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+		return;
-+
- 	if (!root_irq_dir || (desc->irq_data.chip == &no_irq_chip))
- 		return;
- 
-@@ -394,6 +397,9 @@ void unregister_irq_proc(unsigned int ir
- {
- 	char name [MAX_NAMELEN];
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+		return;
-+
- 	if (!root_irq_dir || !desc->dir)
- 		return;
- #ifdef CONFIG_SMP
-@@ -432,6 +438,9 @@ void init_irq_proc(void)
- 	unsigned int irq;
- 	struct irq_desc *desc;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+		return;
-+
- 	/* create /proc/irq */
- 	root_irq_dir = proc_mkdir("irq", NULL);
- 	if (!root_irq_dir)
---- a/kernel/time/timer_list.c
-+++ b/kernel/time/timer_list.c
-@@ -370,6 +370,8 @@ static int __init init_timer_list_procfs
- {
- 	struct proc_dir_entry *pe;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	pe = proc_create_seq_private("timer_list", 0400, NULL, &timer_list_sops,
- 			sizeof(struct timer_list_iter), NULL);
- 	if (!pe)
---- a/mm/vmalloc.c
-+++ b/mm/vmalloc.c
-@@ -3564,6 +3564,8 @@ static const struct seq_operations vmall
- 
- static int __init proc_vmalloc_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	if (IS_ENABLED(CONFIG_NUMA))
- 		proc_create_seq_private("vmallocinfo", 0400, NULL,
- 				&vmalloc_op,
---- a/mm/vmstat.c
-+++ b/mm/vmstat.c
-@@ -1988,10 +1988,12 @@ void __init init_mm_internals(void)
- 	start_shepherd_timer();
- #endif
- #ifdef CONFIG_PROC_FS
--	proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op);
--	proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+		proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op);
-+		proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op);
-+		proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op);
-+	}
- 	proc_create_seq("vmstat", 0444, NULL, &vmstat_op);
--	proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op);
- #endif
- }
- 
---- a/net/8021q/vlanproc.c
-+++ b/net/8021q/vlanproc.c
-@@ -93,6 +93,9 @@ void vlan_proc_cleanup(struct net *net)
- {
- 	struct vlan_net *vn = net_generic(net, vlan_net_id);
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	if (vn->proc_vlan_conf)
- 		remove_proc_entry(name_conf, vn->proc_vlan_dir);
- 
-@@ -112,6 +115,9 @@ int __net_init vlan_proc_init(struct net
- {
- 	struct vlan_net *vn = net_generic(net, vlan_net_id);
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	vn->proc_vlan_dir = proc_net_mkdir(net, name_root, net->proc_net);
- 	if (!vn->proc_vlan_dir)
- 		goto err;
---- a/net/core/net-procfs.c
-+++ b/net/core/net-procfs.c
-@@ -279,10 +279,12 @@ static int __net_init dev_proc_net_init(
- 	if (!proc_create_net("dev", 0444, net->proc_net, &dev_seq_ops,
- 			sizeof(struct seq_net_private)))
- 		goto out;
--	if (!proc_create_seq("softnet_stat", 0444, net->proc_net,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_seq("softnet_stat", 0444, net->proc_net,
- 			 &softnet_seq_ops))
- 		goto out_dev;
--	if (!proc_create_net("ptype", 0444, net->proc_net, &ptype_seq_ops,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_net("ptype", 0444, net->proc_net, &ptype_seq_ops,
- 			sizeof(struct seq_net_private)))
- 		goto out_softnet;
- 
-@@ -292,9 +294,11 @@ static int __net_init dev_proc_net_init(
- out:
- 	return rc;
- out_ptype:
--	remove_proc_entry("ptype", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("ptype", net->proc_net);
- out_softnet:
--	remove_proc_entry("softnet_stat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("softnet_stat", net->proc_net);
- out_dev:
- 	remove_proc_entry("dev", net->proc_net);
- 	goto out;
-@@ -304,8 +308,10 @@ static void __net_exit dev_proc_net_exit
- {
- 	wext_proc_exit(net);
- 
--	remove_proc_entry("ptype", net->proc_net);
--	remove_proc_entry("softnet_stat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+		remove_proc_entry("ptype", net->proc_net);
-+		remove_proc_entry("softnet_stat", net->proc_net);
-+	}
- 	remove_proc_entry("dev", net->proc_net);
- }
- 
---- a/net/core/sock.c
-+++ b/net/core/sock.c
-@@ -3643,6 +3643,8 @@ static __net_initdata struct pernet_oper
- 
- static int __init proto_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	return register_pernet_subsys(&proto_net_ops);
- }
- 
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -2848,11 +2848,13 @@ static const struct seq_operations fib_r
- 
- int __net_init fib_proc_init(struct net *net)
- {
--	if (!proc_create_net("fib_trie", 0444, net->proc_net, &fib_trie_seq_ops,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_net("fib_trie", 0444, net->proc_net, &fib_trie_seq_ops,
- 			sizeof(struct fib_trie_iter)))
- 		goto out1;
- 
--	if (!proc_create_net_single("fib_triestat", 0444, net->proc_net,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_net_single("fib_triestat", 0444, net->proc_net,
- 			fib_triestat_seq_show, NULL))
- 		goto out2;
- 
-@@ -2863,17 +2865,21 @@ int __net_init fib_proc_init(struct net
- 	return 0;
- 
- out3:
--	remove_proc_entry("fib_triestat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("fib_triestat", net->proc_net);
- out2:
--	remove_proc_entry("fib_trie", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("fib_trie", net->proc_net);
- out1:
- 	return -ENOMEM;
- }
- 
- void __net_exit fib_proc_exit(struct net *net)
- {
--	remove_proc_entry("fib_trie", net->proc_net);
--	remove_proc_entry("fib_triestat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+		remove_proc_entry("fib_trie", net->proc_net);
-+		remove_proc_entry("fib_triestat", net->proc_net);
-+	}
- 	remove_proc_entry("route", net->proc_net);
- }
- 
---- a/net/ipv4/proc.c
-+++ b/net/ipv4/proc.c
-@@ -522,5 +522,8 @@ static __net_initdata struct pernet_oper
- 
- int __init ip_misc_proc_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	return register_pernet_subsys(&ip_proc_ops);
- }
---- a/net/ipv4/route.c
-+++ b/net/ipv4/route.c
-@@ -410,6 +410,9 @@ static struct pernet_operations ip_rt_pr
- 
- static int __init ip_rt_proc_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	return register_pernet_subsys(&ip_rt_proc_ops);
- }
- 
diff --git a/target/linux/generic/hack-5.4/904-debloat_dma_buf.patch b/target/linux/generic/hack-5.4/904-debloat_dma_buf.patch
deleted file mode 100644
index 76032d9b82..0000000000
--- a/target/linux/generic/hack-5.4/904-debloat_dma_buf.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From e3692cb2fcd5ba1244512a0f43b8118f65f1c375 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:20:43 +0200
-Subject: debloat: dmabuf
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/base/Kconfig      |  2 +-
- drivers/dma-buf/Makefile  | 10 +++++++---
- drivers/dma-buf/dma-buf.c |  4 +++-
- kernel/sched/core.c       |  1 +
- 4 files changed, 12 insertions(+), 5 deletions(-)
-
---- a/drivers/base/Kconfig
-+++ b/drivers/base/Kconfig
-@@ -179,7 +179,7 @@ config SOC_BUS
- source "drivers/base/regmap/Kconfig"
- 
- config DMA_SHARED_BUFFER
--	bool
-+	tristate
- 	default n
- 	select IRQ_WORK
- 	help
---- a/drivers/dma-buf/Makefile
-+++ b/drivers/dma-buf/Makefile
-@@ -1,9 +1,13 @@
- # SPDX-License-Identifier: GPL-2.0-only
--obj-y := dma-buf.o dma-fence.o dma-fence-array.o dma-fence-chain.o \
--	 dma-resv.o seqno-fence.o
--obj-$(CONFIG_SYNC_FILE)		+= sync_file.o
--obj-$(CONFIG_SW_SYNC)		+= sw_sync.o sync_debug.o
--obj-$(CONFIG_UDMABUF)		+= udmabuf.o
-+obj-$(CONFIG_DMA_SHARED_BUFFER) := dma-shared-buffer.o
-+
-+dma-buf-objs-y := dma-buf.o dma-fence.o dma-fence-array.o dma-fence-chain.o \
-+		  dma-resv.o seqno-fence.o
-+dma-buf-objs-$(CONFIG_SYNC_FILE)	+= sync_file.o
-+dma-buf-objs-$(CONFIG_SW_SYNC)		+= sw_sync.o sync_debug.o
-+dma-buf-objs-$(CONFIG_UDMABUF)		+= udmabuf.o
-+
-+dma-shared-buffer-objs :=  $(dma-buf-objs-y)
- 
- dmabuf_selftests-y := \
- 	selftest.o \
---- a/drivers/dma-buf/dma-buf.c
-+++ b/drivers/dma-buf/dma-buf.c
-@@ -1314,4 +1314,5 @@ static void __exit dma_buf_deinit(void)
- 	dma_buf_uninit_debugfs();
- 	kern_unmount(dma_buf_mnt);
- }
--__exitcall(dma_buf_deinit);
-+module_exit(dma_buf_deinit);
-+MODULE_LICENSE("GPL");
---- a/kernel/sched/core.c
-+++ b/kernel/sched/core.c
-@@ -2770,6 +2770,7 @@ int wake_up_state(struct task_struct *p,
- {
- 	return try_to_wake_up(p, state, 0);
- }
-+EXPORT_SYMBOL_GPL(wake_up_state);
- 
- /*
-  * Perform scheduler related setup for a newly forked process p.
---- a/fs/d_path.c
-+++ b/fs/d_path.c
-@@ -311,6 +311,7 @@ char *dynamic_dname(struct dentry *dentr
- 	buffer += buflen - sz;
- 	return memcpy(buffer, temp, sz);
- }
-+EXPORT_SYMBOL_GPL(dynamic_dname);
- 
- char *simple_dname(struct dentry *dentry, char *buffer, int buflen)
- {
diff --git a/target/linux/generic/hack-5.4/910-kobject_uevent.patch b/target/linux/generic/hack-5.4/910-kobject_uevent.patch
deleted file mode 100644
index c4c41ca400..0000000000
--- a/target/linux/generic/hack-5.4/910-kobject_uevent.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 16 Jul 2017 16:56:10 +0200
-Subject: lib: add uevent_next_seqnum()
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/kobject.h |  5 +++++
- lib/kobject_uevent.c    | 37 +++++++++++++++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
-
---- a/lib/kobject_uevent.c
-+++ b/lib/kobject_uevent.c
-@@ -179,6 +179,18 @@ out:
- 	return r;
- }
- 
-+u64 uevent_next_seqnum(void)
-+{
-+	u64 seq;
-+
-+	mutex_lock(&uevent_sock_mutex);
-+	seq = ++uevent_seqnum;
-+	mutex_unlock(&uevent_sock_mutex);
-+
-+	return seq;
-+}
-+EXPORT_SYMBOL_GPL(uevent_next_seqnum);
-+
- /**
-  * kobject_synth_uevent - send synthetic uevent with arguments
-  *
diff --git a/target/linux/generic/hack-5.4/911-kobject_add_broadcast_uevent.patch b/target/linux/generic/hack-5.4/911-kobject_add_broadcast_uevent.patch
deleted file mode 100644
index 6f5e50d091..0000000000
--- a/target/linux/generic/hack-5.4/911-kobject_add_broadcast_uevent.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 16 Jul 2017 16:56:10 +0200
-Subject: lib: add uevent_next_seqnum()
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/kobject.h |  5 +++++
- lib/kobject_uevent.c    | 37 +++++++++++++++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
-
---- a/include/linux/kobject.h
-+++ b/include/linux/kobject.h
-@@ -32,6 +32,8 @@
- #define UEVENT_NUM_ENVP			32	/* number of env pointers */
- #define UEVENT_BUFFER_SIZE		2048	/* buffer for the variables */
- 
-+struct sk_buff;
-+
- #ifdef CONFIG_UEVENT_HELPER
- /* path to the userspace helper executed on an event */
- extern char uevent_helper[];
-@@ -245,4 +247,7 @@ int kobject_synth_uevent(struct kobject
- __printf(2, 3)
- int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...);
- 
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+		     gfp_t allocation);
-+
- #endif /* _KOBJECT_H_ */
---- a/lib/kobject_uevent.c
-+++ b/lib/kobject_uevent.c
-@@ -691,6 +691,43 @@ int add_uevent_var(struct kobj_uevent_en
- EXPORT_SYMBOL_GPL(add_uevent_var);
- 
- #if defined(CONFIG_NET)
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+		     gfp_t allocation)
-+{
-+	struct uevent_sock *ue_sk;
-+	int err = 0;
-+
-+	/* send netlink message */
-+	mutex_lock(&uevent_sock_mutex);
-+	list_for_each_entry(ue_sk, &uevent_sock_list, list) {
-+		struct sock *uevent_sock = ue_sk->sk;
-+		struct sk_buff *skb2;
-+
-+		skb2 = skb_clone(skb, allocation);
-+		if (!skb2)
-+			break;
-+
-+		err = netlink_broadcast(uevent_sock, skb2, pid, group,
-+					allocation);
-+		if (err)
-+			break;
-+	}
-+	mutex_unlock(&uevent_sock_mutex);
-+
-+	kfree_skb(skb);
-+	return err;
-+}
-+#else
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+		     gfp_t allocation)
-+{
-+	kfree_skb(skb);
-+	return 0;
-+}
-+#endif
-+EXPORT_SYMBOL_GPL(broadcast_uevent);
-+
-+#if defined(CONFIG_NET)
- static int uevent_net_broadcast(struct sock *usk, struct sk_buff *skb,
- 				struct netlink_ext_ack *extack)
- {
diff --git a/target/linux/generic/hack-5.4/920-device_tree_cmdline.patch b/target/linux/generic/hack-5.4/920-device_tree_cmdline.patch
deleted file mode 100644
index 3cc032fdd2..0000000000
--- a/target/linux/generic/hack-5.4/920-device_tree_cmdline.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -1059,6 +1059,9 @@ int __init early_init_dt_scan_chosen(uns
- 	p = of_get_flat_dt_prop(node, "bootargs", &l);
- 	if (p != NULL && l > 0)
- 		strlcpy(data, p, min(l, COMMAND_LINE_SIZE));
-+	p = of_get_flat_dt_prop(node, "bootargs-append", &l);
-+	if (p != NULL && l > 0)
-+		strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE));
- 
- 	/*
- 	 * CONFIG_CMDLINE is meant to be a default in case nothing else
diff --git a/target/linux/generic/hack-5.4/921-always-create-console-node-in-initramfs.patch b/target/linux/generic/hack-5.4/921-always-create-console-node-in-initramfs.patch
deleted file mode 100644
index e437579050..0000000000
--- a/target/linux/generic/hack-5.4/921-always-create-console-node-in-initramfs.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 5d301596fdc72f6cb672f72eb3c66e7cddefb103 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:26:02 +0200
-Subject: initramfs: always create console node
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- usr/gen_initramfs_list.sh | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/usr/gen_initramfs_list.sh
-+++ b/usr/gen_initramfs_list.sh
-@@ -59,6 +59,18 @@ default_initramfs() {
- 	EOF
- }
- 
-+list_openwrt_initramfs() {
-+	:
-+}
-+
-+openwrt_initramfs() {
-+	# make sure that /dev/console exists
-+	cat <<-EOF >> ${output}
-+		dir /dev 0755 0 0
-+		nod /dev/console 0600 0 0 c 5 1
-+	EOF
-+}
-+
- filetype() {
- 	local argv1="$1"
- 
-@@ -180,6 +192,8 @@ dir_filelist() {
- 	if [  "$(echo "${dirlist}" | wc -l)" -gt 1 ]; then
- 		${dep_list}print_mtime "$1"
- 
-+		${dep_list}openwrt_initramfs
-+
- 		echo "${dirlist}" | \
- 		while read x; do
- 			${dep_list}parse ${x}
diff --git a/target/linux/generic/pending-5.4/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch b/target/linux/generic/pending-5.4/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
deleted file mode 100644
index 33eb34c913..0000000000
--- a/target/linux/generic/pending-5.4/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From d9c8bc8c1408f3e8529db6e4e04017b4c579c342 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sun, 18 Feb 2018 17:08:04 +0100
-Subject: [PATCH] w1: gpio: fix problem with platfom data in w1-gpio
-
-In devices, where fdt is used, is impossible to apply platform data
-without proper fdt node.
-
-This patch allow to use platform data in devices with fdt.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- drivers/w1/masters/w1-gpio.c | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
---- a/drivers/w1/masters/w1-gpio.c
-+++ b/drivers/w1/masters/w1-gpio.c
-@@ -76,7 +76,7 @@ static int w1_gpio_probe(struct platform
- 	enum gpiod_flags gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
- 	int err;
- 
--	if (of_have_populated_dt()) {
-+	if (of_have_populated_dt() && !dev_get_platdata(&pdev->dev)) {
- 		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- 		if (!pdata)
- 			return -ENOMEM;
diff --git a/target/linux/generic/pending-5.4/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch b/target/linux/generic/pending-5.4/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch
deleted file mode 100644
index 45319415f1..0000000000
--- a/target/linux/generic/pending-5.4/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 18 Apr 2018 10:50:05 +0200
-Subject: [PATCH] MIPS: only process negative stack offsets on stack traces
-
-Fixes endless back traces in cases where the compiler emits a stack
-pointer increase in a branch delay slot (probably for some form of
-function return).
-
-[    3.475442] BUG: MAX_STACK_TRACE_ENTRIES too low!
-[    3.480070] turning off the locking correctness validator.
-[    3.485521] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.34 #0
-[    3.491475] Stack : 00000000 00000000 00000000 00000000 80e0fce2 00000034 00000000 00000000
-[    3.499764]         87c3838c 80696377 8061047c 00000000 00000001 00000001 87c2d850 6534689f
-[    3.508059]         00000000 00000000 80e10000 00000000 00000000 000000cf 0000000f 00000000
-[    3.516353]         00000000 806a0000 00076891 00000000 00000000 00000000 ffffffff 00000000
-[    3.524648]         806c0000 00000004 80e10000 806a0000 00000003 80690000 00000000 80700000
-[    3.532942]         ...
-[    3.535362] Call Trace:
-[    3.537818] [<80010a48>] show_stack+0x58/0x100
-[    3.542207] [<804c2f78>] dump_stack+0xe8/0x170
-[    3.546613] [<80079f90>] save_trace+0xf0/0x110
-[    3.551010] [<8007b1ec>] mark_lock+0x33c/0x78c
-[    3.555413] [<8007bf48>] __lock_acquire+0x2ac/0x1a08
-[    3.560337] [<8007de60>] lock_acquire+0x64/0x8c
-[    3.564846] [<804e1570>] _raw_spin_lock_irqsave+0x54/0x78
-[    3.570186] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.574770] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.579257] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.583839] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.588329] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.592911] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.597401] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.601983] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.606473] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.611055] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.615545] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.620125] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.624619] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.629197] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.633691] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.638269] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.642763] [<801b618c>] kernfs_notify+0x94/0xac
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/kernel/process.c
-+++ b/arch/mips/kernel/process.c
-@@ -365,6 +365,8 @@ static inline int is_sp_move_ins(union m
- 
- 	if (ip->i_format.opcode == addiu_op ||
- 	    ip->i_format.opcode == daddiu_op) {
-+		if (ip->i_format.simmediate > 0)
-+			return 0;
- 		*frame_size = -ip->i_format.simmediate;
- 		return 1;
- 	}
diff --git a/target/linux/generic/pending-5.4/103-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch b/target/linux/generic/pending-5.4/103-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch
deleted file mode 100644
index 85cd223053..0000000000
--- a/target/linux/generic/pending-5.4/103-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 31ca877744d95713e4925de542e1c686ab08a542 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Sat, 27 Feb 2021 13:20:24 +0100
-Subject: [PATCH] MIPS: select CPU_MIPS64 for remaining MIPS64 CPUs
-
-The CPU_MIPS64 and CPU_MIPS32 variables are supposed to be able to
-distinguish broadly between 64-bit and 32-bit MIPS CPUs. However, they
-weren't selected by the specialty CPUs, Octeon and Loongson, which meant
-it was possible to hit a weird state of:
-
-    MIPS=y, CONFIG_64BIT=y, CPU_MIPS64=n
-
-This commit rectifies the issue by having CPU_MIPS64 be selected when
-the missing Octeon or Loongson models are selected.
-
-Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-Cc: Ralf Baechle <ralf@linux-mips.org>
-Cc: George Cherian <gcherian@marvell.com>
-Cc: Huacai Chen <chenhuacai@kernel.org>
-Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/mips/Kconfig | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -2043,7 +2043,8 @@ config CPU_MIPS32
- 
- config CPU_MIPS64
- 	bool
--	default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R6
-+	default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R6 || \
-+		     CPU_LOONGSON64 || CPU_CAVIUM_OCTEON
- 
- #
- # These indicate the revision of the architecture
diff --git a/target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch b/target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
deleted file mode 100644
index 09e8267034..0000000000
--- a/target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From: Tobias Wolf <dev-NTEO@vplace.de>
-Subject: mm: Fix alloc_node_mem_map with ARCH_PFN_OFFSET calculation
-
-An rt288x (ralink) based router (Belkin F5D8235 v1) does not boot with any
-kernel beyond version 4.3 resulting in:
-
-BUG: Bad page state in process swapper  pfn:086ac
-
-bisect resulted in:
-
-a1c34a3bf00af2cede839879502e12dc68491ad5 is the first bad commit
-commit a1c34a3bf00af2cede839879502e12dc68491ad5
-Author: Laura Abbott <laura@labbott.name>
-Date:   Thu Nov 5 18:48:46 2015 -0800
-
-    mm: Don't offset memmap for flatmem
-
-    Srinivas Kandagatla reported bad page messages when trying to remove the
-    bottom 2MB on an ARM based IFC6410 board
-
-      BUG: Bad page state in process swapper  pfn:fffa8
-      page:ef7fb500 count:0 mapcount:0 mapping:  (null) index:0x0
-      flags: 0x96640253(locked|error|dirty|active|arch_1|reclaim|mlocked)
-      page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
-      bad because of flags:
-      flags: 0x200041(locked|active|mlocked)
-      Modules linked in:
-      CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-rc3-00007-g412f9ba-dirty
-#816
-      Hardware name: Qualcomm (Flattened Device Tree)
-        unwind_backtrace
-        show_stack
-        dump_stack
-        bad_page
-        free_pages_prepare
-        free_hot_cold_page
-        __free_pages
-        free_highmem_page
-        mem_init
-        start_kernel
-      Disabling lock debugging due to kernel taint
-    [...]
-:040000 040000 2de013c372345fd471cd58f0553c9b38b0ef1cc4
-0a8156f848733dfa21e16c196dfb6c0a76290709 M      mm
-
-This fix for ARM does not account ARCH_PFN_OFFSET for mem_map as later used by
-page_to_pfn anymore.
-
-The following output was generated with two hacked in printk statements:
-
-printk("before %p vs. %p or %p\n", mem_map, mem_map - offset, mem_map -
-(pgdat->node_start_pfn - ARCH_PFN_OFFSET));
-		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
-			mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
-printk("after %p\n", mem_map);
-
-Output:
-
-[    0.000000] before 8861b280 vs. 8861b280 or 8851b280
-[    0.000000] after 8851b280
-
-As seen in the first line mem_map with subtraction of offset does not equal the
-mem_map after subtraction of ARCH_PFN_OFFSET.
-
-After adding the offset of ARCH_PFN_OFFSET as well to mem_map as the
-previously calculated offset is zero for the named platform it is able to boot
-4.4 and 4.9-rc7 again.
-
-Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
----
-
---- a/mm/page_alloc.c
-+++ b/mm/page_alloc.c
-@@ -6886,7 +6886,7 @@ static void __ref alloc_node_mem_map(str
- 		mem_map = NODE_DATA(0)->node_mem_map;
- #if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM)
- 		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
--			mem_map -= offset;
-+			mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
- #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
- 	}
- #endif
diff --git a/target/linux/generic/pending-5.4/130-add-linux-spidev-compatible-si3210.patch b/target/linux/generic/pending-5.4/130-add-linux-spidev-compatible-si3210.patch
deleted file mode 100644
index eedb2bb28d..0000000000
--- a/target/linux/generic/pending-5.4/130-add-linux-spidev-compatible-si3210.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-From: Giuseppe Lippolis <giu.lippolis@gmail.com>
-Subject: Add the linux,spidev compatible in spidev Several device in ramips have this binding in the dts
-
-Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
----
- drivers/spi/spidev.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/spi/spidev.c
-+++ b/drivers/spi/spidev.c
-@@ -678,6 +678,7 @@ static const struct of_device_id spidev_
- 	{ .compatible = "lwn,bk4" },
- 	{ .compatible = "dh,dhcom-board" },
- 	{ .compatible = "menlo,m53cpld" },
-+	{ .compatible = "siliconlabs,si3210" },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, spidev_dt_ids);
diff --git a/target/linux/generic/pending-5.4/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch b/target/linux/generic/pending-5.4/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
deleted file mode 100644
index b9bb3f71f1..0000000000
--- a/target/linux/generic/pending-5.4/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: jffs2: use .rename2 and add RENAME_WHITEOUT support
-
-It is required for renames on overlayfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/dir.c
-+++ b/fs/jffs2/dir.c
-@@ -756,6 +756,24 @@ static int jffs2_mknod (struct inode *di
- 	return ret;
- }
- 
-+static int jffs2_whiteout (struct inode *old_dir, struct dentry *old_dentry)
-+{
-+	struct dentry *wh;
-+	int err;
-+
-+	wh = d_alloc(old_dentry->d_parent, &old_dentry->d_name);
-+	if (!wh)
-+		return -ENOMEM;
-+
-+	err = jffs2_mknod(old_dir, wh, S_IFCHR | WHITEOUT_MODE,
-+			  WHITEOUT_DEV);
-+	if (err)
-+		return err;
-+
-+	d_rehash(wh);
-+	return 0;
-+}
-+
- static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
- 			 struct inode *new_dir_i, struct dentry *new_dentry,
- 			 unsigned int flags)
-@@ -766,7 +784,7 @@ static int jffs2_rename (struct inode *o
- 	uint8_t type;
- 	uint32_t now;
- 
--	if (flags & ~RENAME_NOREPLACE)
-+	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
- 		return -EINVAL;
- 
- 	/* The VFS will check for us and prevent trying to rename a
-@@ -832,9 +850,14 @@ static int jffs2_rename (struct inode *o
- 	if (d_is_dir(old_dentry) && !victim_f)
- 		inc_nlink(new_dir_i);
- 
--	/* Unlink the original */
--	ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
--			      old_dentry->d_name.name, old_dentry->d_name.len, NULL, now);
-+	if (flags & RENAME_WHITEOUT)
-+		/* Replace with whiteout */
-+		ret = jffs2_whiteout(old_dir_i, old_dentry);
-+	else
-+		/* Unlink the original */
-+		ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-+				      old_dentry->d_name.name,
-+				      old_dentry->d_name.len, NULL, now);
- 
- 	/* We don't touch inode->i_nlink */
- 
diff --git a/target/linux/generic/pending-5.4/141-jffs2-add-RENAME_EXCHANGE-support.patch b/target/linux/generic/pending-5.4/141-jffs2-add-RENAME_EXCHANGE-support.patch
deleted file mode 100644
index 4b30bc7cd0..0000000000
--- a/target/linux/generic/pending-5.4/141-jffs2-add-RENAME_EXCHANGE-support.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: jffs2: add RENAME_EXCHANGE support
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/dir.c
-+++ b/fs/jffs2/dir.c
-@@ -781,18 +781,31 @@ static int jffs2_rename (struct inode *o
- 	int ret;
- 	struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
- 	struct jffs2_inode_info *victim_f = NULL;
-+	struct inode *fst_inode = d_inode(old_dentry);
-+	struct inode *snd_inode = d_inode(new_dentry);
- 	uint8_t type;
- 	uint32_t now;
- 
--	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
-+	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT|RENAME_EXCHANGE))
- 		return -EINVAL;
- 
-+	if ((flags & RENAME_EXCHANGE) && (old_dir_i != new_dir_i)) {
-+		if (S_ISDIR(fst_inode->i_mode) && !S_ISDIR(snd_inode->i_mode)) {
-+			inc_nlink(new_dir_i);
-+			drop_nlink(old_dir_i);
-+		}
-+		else if (!S_ISDIR(fst_inode->i_mode) && S_ISDIR(snd_inode->i_mode)) {
-+			drop_nlink(new_dir_i);
-+			inc_nlink(old_dir_i);
-+		}
-+	}
-+
- 	/* The VFS will check for us and prevent trying to rename a
- 	 * file over a directory and vice versa, but if it's a directory,
- 	 * the VFS can't check whether the victim is empty. The filesystem
- 	 * needs to do that for itself.
- 	 */
--	if (d_really_is_positive(new_dentry)) {
-+	if (d_really_is_positive(new_dentry) && !(flags & RENAME_EXCHANGE)) {
- 		victim_f = JFFS2_INODE_INFO(d_inode(new_dentry));
- 		if (d_is_dir(new_dentry)) {
- 			struct jffs2_full_dirent *fd;
-@@ -827,7 +840,7 @@ static int jffs2_rename (struct inode *o
- 	if (ret)
- 		return ret;
- 
--	if (victim_f) {
-+	if (victim_f && !(flags & RENAME_EXCHANGE)) {
- 		/* There was a victim. Kill it off nicely */
- 		if (d_is_dir(new_dentry))
- 			clear_nlink(d_inode(new_dentry));
-@@ -853,6 +866,12 @@ static int jffs2_rename (struct inode *o
- 	if (flags & RENAME_WHITEOUT)
- 		/* Replace with whiteout */
- 		ret = jffs2_whiteout(old_dir_i, old_dentry);
-+	else if (flags & RENAME_EXCHANGE)
-+		/* Replace the original */
-+		ret = jffs2_do_link(c, JFFS2_INODE_INFO(old_dir_i),
-+				    d_inode(new_dentry)->i_ino, type,
-+				    old_dentry->d_name.name, old_dentry->d_name.len,
-+				    now);
- 	else
- 		/* Unlink the original */
- 		ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-@@ -884,7 +903,7 @@ static int jffs2_rename (struct inode *o
- 		return ret;
- 	}
- 
--	if (d_is_dir(old_dentry))
-+	if (d_is_dir(old_dentry) && !(flags & RENAME_EXCHANGE))
- 		drop_nlink(old_dir_i);
- 
- 	new_dir_i->i_mtime = new_dir_i->i_ctime = old_dir_i->i_mtime = old_dir_i->i_ctime = ITIME(now);
diff --git a/target/linux/generic/pending-5.4/150-bridge_allow_receiption_on_disabled_port.patch b/target/linux/generic/pending-5.4/150-bridge_allow_receiption_on_disabled_port.patch
deleted file mode 100644
index c63268ece9..0000000000
--- a/target/linux/generic/pending-5.4/150-bridge_allow_receiption_on_disabled_port.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: Stephen Hemminger <stephen@networkplumber.org>
-Subject: bridge: allow receiption on disabled port
-
-When an ethernet device is enslaved to a bridge, and the bridge STP
-detects loss of carrier (or operational state down), then normally
-packet receiption is blocked.
-
-This breaks control applications like WPA which maybe expecting to
-receive packets to negotiate to bring link up. The bridge needs to
-block forwarding packets from these disabled ports, but there is no
-hard requirement to not allow local packet delivery.
-
-Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -190,6 +190,9 @@ static void __br_handle_local_finish(str
- /* note: already called with rcu_read_lock */
- static int br_handle_local_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
- {
-+	struct net_bridge_port *p = br_port_get_rcu(skb->dev);
-+
-+	if (p->state != BR_STATE_DISABLED)
- 	__br_handle_local_finish(skb);
- 
- 	/* return 1 to signal the okfn() was called so it's ok to use the skb */
-@@ -340,6 +343,17 @@ rx_handler_result_t br_handle_frame(stru
- 
- forward:
- 	switch (p->state) {
-+	case BR_STATE_DISABLED:
-+		if (ether_addr_equal(p->br->dev->dev_addr, dest))
-+			skb->pkt_type = PACKET_HOST;
-+
-+		if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING,
-+			dev_net(skb->dev), NULL, skb, skb->dev, NULL,
-+			br_handle_local_finish) == 1) {
-+			return RX_HANDLER_PASS;
-+		}
-+		break;
-+
- 	case BR_STATE_FORWARDING:
- 	case BR_STATE_LEARNING:
- 		if (ether_addr_equal(p->br->dev->dev_addr, dest))
diff --git a/target/linux/generic/pending-5.4/180-net-phy-at803x-add-support-for-AT8032.patch b/target/linux/generic/pending-5.4/180-net-phy-at803x-add-support-for-AT8032.patch
deleted file mode 100644
index 3fe25c2b2b..0000000000
--- a/target/linux/generic/pending-5.4/180-net-phy-at803x-add-support-for-AT8032.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: phy: at803x: add support for AT8032
-
-Like AT8030, this PHY needs the GPIO reset workaround
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -64,8 +64,10 @@
- 
- #define ATH8030_PHY_ID 0x004dd076
- #define ATH8031_PHY_ID 0x004dd074
-+#define ATH8032_PHY_ID 0x004dd023
- #define ATH8035_PHY_ID 0x004dd072
- #define AT803X_PHY_ID_MASK			0xffffffef
-+#define AT8032_PHY_ID_MASK			0xffffffff
- 
- #define AT803X_PAGE_FIBER		0
- #define AT803X_PAGE_COPPER		1
-@@ -357,7 +359,7 @@ static int at803x_config_intr(struct phy
- static void at803x_link_change_notify(struct phy_device *phydev)
- {
- 	/*
--	 * Conduct a hardware reset for AT8030 every time a link loss is
-+	 * Conduct a hardware reset for AT8030/2 every time a link loss is
- 	 * signalled. This is necessary to circumvent a hardware bug that
- 	 * occurs when the cable is unplugged while TX packets are pending
- 	 * in the FIFO. In such cases, the FIFO enters an error mode it
-@@ -516,6 +518,24 @@ static struct phy_driver at803x_driver[]
- 	.aneg_done		= at803x_aneg_done,
- 	.ack_interrupt		= &at803x_ack_interrupt,
- 	.config_intr		= &at803x_config_intr,
-+}, {
-+	/* ATHEROS 8032 */
-+	.phy_id			= ATH8032_PHY_ID,
-+	.name			= "Atheros 8032 ethernet",
-+	.phy_id_mask		= AT8032_PHY_ID_MASK,
-+	.probe			= at803x_probe,
-+	.config_init		= at803x_config_init,
-+	.link_change_notify	= at803x_link_change_notify,
-+	.set_wol		= at803x_set_wol,
-+	.get_wol		= at803x_get_wol,
-+	.suspend		= at803x_suspend,
-+	.resume			= at803x_resume,
-+	/* PHY_BASIC_FEATURES */
-+	.read_status		= at803x_read_status,
-+	.config_aneg		= genphy_config_aneg,
-+	.read_status		= genphy_read_status,
-+	.ack_interrupt		= at803x_ack_interrupt,
-+	.config_intr		= at803x_config_intr,
- } };
- 
- module_phy_driver(at803x_driver);
-@@ -523,6 +543,7 @@ module_phy_driver(at803x_driver);
- static struct mdio_device_id __maybe_unused atheros_tbl[] = {
- 	{ ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
- 	{ ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
-+	{ ATH8032_PHY_ID, AT8032_PHY_ID_MASK },
- 	{ ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
- 	{ }
- };
diff --git a/target/linux/generic/pending-5.4/190-rtc-rs5c372-support_alarms_up_to_1_week.patch b/target/linux/generic/pending-5.4/190-rtc-rs5c372-support_alarms_up_to_1_week.patch
deleted file mode 100644
index 13b79b5c09..0000000000
--- a/target/linux/generic/pending-5.4/190-rtc-rs5c372-support_alarms_up_to_1_week.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From: Daniel González Cabanelas <dgcbueu@gmail.com>
-Subject: [PATCH 1/2] rtc: rs5c372: support alarms up to 1 week
-
-The Ricoh R2221x, R2223x, RS5C372, RV5C387A chips can handle 1 week
-alarms.
-
-Read the "wday" alarm register and convert it to a date to support up 1
-week in our driver.
-
-Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
----
- drivers/rtc/rtc-rs5c372.c | 48 ++++++++++++++++++++++++++++++++++-----
- 1 file changed, 42 insertions(+), 6 deletions(-)
-
---- a/drivers/rtc/rtc-rs5c372.c
-+++ b/drivers/rtc/rtc-rs5c372.c
-@@ -393,7 +393,9 @@ static int rs5c_read_alarm(struct device
- {
- 	struct i2c_client	*client = to_i2c_client(dev);
- 	struct rs5c372		*rs5c = i2c_get_clientdata(client);
--	int			status;
-+	int			status, wday_offs;
-+	struct rtc_time 	rtc;
-+	unsigned long 		alarm_secs;
- 
- 	status = rs5c_get_regs(rs5c);
- 	if (status < 0)
-@@ -403,6 +405,30 @@ static int rs5c_read_alarm(struct device
- 	t->time.tm_sec = 0;
- 	t->time.tm_min = bcd2bin(rs5c->regs[RS5C_REG_ALARM_A_MIN] & 0x7f);
- 	t->time.tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C_REG_ALARM_A_HOURS]);
-+	t->time.tm_wday = ffs(rs5c->regs[RS5C_REG_ALARM_A_WDAY] & 0x7f) - 1;
-+
-+	/* determine the day, month and year based on alarm wday, taking as a
-+	 * reference the current time from the rtc
-+	 */
-+	status = rs5c372_rtc_read_time(dev, &rtc);
-+	if (status < 0)
-+		return status;
-+
-+	wday_offs = t->time.tm_wday - rtc.tm_wday;
-+	alarm_secs = mktime64(rtc.tm_year + 1900,
-+			      rtc.tm_mon + 1,
-+			      rtc.tm_mday + wday_offs,
-+			      t->time.tm_hour,
-+			      t->time.tm_min,
-+			      t->time.tm_sec);
-+
-+	if (wday_offs < 0 || (wday_offs == 0 &&
-+			      (t->time.tm_hour < rtc.tm_hour ||
-+			       (t->time.tm_hour == rtc.tm_hour &&
-+				t->time.tm_min <= rtc.tm_min))))
-+		alarm_secs += 7 * 86400;
-+
-+	rtc_time64_to_tm(alarm_secs, &t->time);
- 
- 	/* ... and status */
- 	t->enabled = !!(rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE);
-@@ -417,12 +443,20 @@ static int rs5c_set_alarm(struct device
- 	struct rs5c372		*rs5c = i2c_get_clientdata(client);
- 	int			status, addr, i;
- 	unsigned char		buf[3];
-+	struct rtc_time 	rtc_tm;
-+	unsigned long 		rtc_secs, alarm_secs;
- 
--	/* only handle up to 24 hours in the future, like RTC_ALM_SET */
--	if (t->time.tm_mday != -1
--			|| t->time.tm_mon != -1
--			|| t->time.tm_year != -1)
-+	/* chip only can handle alarms up to one week in the future*/
-+	status = rs5c372_rtc_read_time(dev, &rtc_tm);
-+	if (status)
-+		return status;
-+	rtc_secs = rtc_tm_to_time64(&rtc_tm);
-+	alarm_secs = rtc_tm_to_time64(&t->time);
-+	if (alarm_secs >= rtc_secs + 7 * 86400) {
-+		dev_err(dev, "%s: alarm maximum is one week in the future (%d)\n",
-+			__func__, status);
- 		return -EINVAL;
-+	}
- 
- 	/* REVISIT: round up tm_sec */
- 
-@@ -443,7 +477,9 @@ static int rs5c_set_alarm(struct device
- 	/* set alarm */
- 	buf[0] = bin2bcd(t->time.tm_min);
- 	buf[1] = rs5c_hr2reg(rs5c, t->time.tm_hour);
--	buf[2] = 0x7f;	/* any/all days */
-+	/* each bit is the day of the week, 0x7f means all days */
-+	buf[2] = (t->time.tm_wday >= 0 && t->time.tm_wday < 7) ?
-+		  BIT(t->time.tm_wday) : 0x7f;
- 
- 	for (i = 0; i < sizeof(buf); i++) {
- 		addr = RS5C_ADDR(RS5C_REG_ALARM_A_MIN + i);
diff --git a/target/linux/generic/pending-5.4/191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source.patch b/target/linux/generic/pending-5.4/191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source.patch
deleted file mode 100644
index 7e9d0e66c0..0000000000
--- a/target/linux/generic/pending-5.4/191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From: Daniel González Cabanelas <dgcbueu@gmail.com>
-Subject: [PATCH 2/2] rtc: rs5c372: let the alarm to be used as wakeup source
-
-Currently there is no use for the interrupts on the rs5c372 RTC and the
-wakealarm isn't enabled. There are some devices like NASes which use this
-RTC to wake up from the power off state when the INTR pin is activated by
-the alarm clock.
-
-Enable the alarm and let to be used as a wakeup source.
-
-Tested on a Buffalo LS421DE NAS.
-
-Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
----
- drivers/rtc/rtc-rs5c372.c | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/drivers/rtc/rtc-rs5c372.c
-+++ b/drivers/rtc/rtc-rs5c372.c
-@@ -654,6 +654,7 @@ static int rs5c372_probe(struct i2c_clie
- 	int err = 0;
- 	int smbus_mode = 0;
- 	struct rs5c372 *rs5c372;
-+	bool rs5c372_can_wakeup_device = false;
- 
- 	dev_dbg(&client->dev, "%s\n", __func__);
- 
-@@ -689,6 +690,12 @@ static int rs5c372_probe(struct i2c_clie
- 	else
- 		rs5c372->type = id->driver_data;
- 
-+#ifdef CONFIG_OF
-+	if(of_property_read_bool(client->dev.of_node,
-+					      "wakeup-source"))
-+		rs5c372_can_wakeup_device = true;
-+#endif
-+
- 	/* we read registers 0x0f then 0x00-0x0f; skip the first one */
- 	rs5c372->regs = &rs5c372->buf[1];
- 	rs5c372->smbus = smbus_mode;
-@@ -722,6 +729,8 @@ static int rs5c372_probe(struct i2c_clie
- 		goto exit;
- 	}
- 
-+	rs5c372->has_irq = 1;
-+
- 	/* if the oscillator lost power and no other software (like
- 	 * the bootloader) set it up, do it here.
- 	 *
-@@ -748,6 +757,10 @@ static int rs5c372_probe(struct i2c_clie
- 			);
- 
- 	/* REVISIT use client->irq to register alarm irq ... */
-+	if (rs5c372_can_wakeup_device) {
-+		device_init_wakeup(&client->dev, true);
-+	}
-+
- 	rs5c372->rtc = devm_rtc_device_register(&client->dev,
- 					rs5c372_driver.driver.name,
- 					&rs5c372_rtc_ops, THIS_MODULE);
-@@ -761,6 +774,9 @@ static int rs5c372_probe(struct i2c_clie
- 	if (err)
- 		goto exit;
- 
-+	/* the rs5c372 alarm only supports a minute accuracy */
-+	rs5c372->rtc->uie_unsupported = 1;
-+
- 	return 0;
- 
- exit:
diff --git a/target/linux/generic/pending-5.4/201-extra_optimization.patch b/target/linux/generic/pending-5.4/201-extra_optimization.patch
deleted file mode 100644
index c606487992..0000000000
--- a/target/linux/generic/pending-5.4/201-extra_optimization.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: Upgrade to Linux 2.6.19
-
-- Includes large parts of the patch from #1021 by dpalffy
-- Includes RB532 NAND driver changes by n0-1
-
-[john@phrozen.org: feix will add this to his upstream queue]
-
-lede-commit: bff468813f78f81e36ebb2a3f4354de7365e640f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- Makefile | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -719,11 +719,11 @@ KBUILD_CFLAGS	+= $(call cc-disable-warni
- KBUILD_CFLAGS	+= $(call cc-disable-warning, address-of-packed-member)
- 
- ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE
--KBUILD_CFLAGS += -O2
-+KBUILD_CFLAGS += -O2 $(EXTRA_OPTIMIZATION)
- else ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3
--KBUILD_CFLAGS += -O3
-+KBUILD_CFLAGS += -O3 $(EXTRA_OPTIMIZATION)
- else ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
--KBUILD_CFLAGS += -Os
-+KBUILD_CFLAGS += -Os -fno-reorder-blocks -fno-tree-ch $(EXTRA_OPTIMIZATION)
- endif
- 
- # Tell gcc to never replace conditional load with a non-conditional one
diff --git a/target/linux/generic/pending-5.4/203-kallsyms_uncompressed.patch b/target/linux/generic/pending-5.4/203-kallsyms_uncompressed.patch
deleted file mode 100644
index 68a2d4d88f..0000000000
--- a/target/linux/generic/pending-5.4/203-kallsyms_uncompressed.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx
-
-[john@phrozen.org: added to my upstream queue 30.12.2016]
-lede-commit: e0e3509b5ce2ccf93d4d67ea907613f5f7ec2eed
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- init/Kconfig            | 11 +++++++++++
- kernel/kallsyms.c       |  8 ++++++++
- scripts/kallsyms.c      | 12 ++++++++++++
- scripts/link-vmlinux.sh |  4 ++++
- 4 files changed, 35 insertions(+)
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1280,6 +1280,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW
- 	  the unaligned access emulation.
- 	  see arch/parisc/kernel/unaligned.c for reference
- 
-+config KALLSYMS_UNCOMPRESSED
-+	bool "Keep kallsyms uncompressed"
-+	depends on KALLSYMS
-+	help
-+		Normally kallsyms contains compressed symbols (using a token table),
-+		reducing the uncompressed kernel image size. Keeping the symbol table
-+		uncompressed significantly improves the size of this part in compressed
-+		kernel images.
-+
-+		Say N unless you need compressed kernel images to be small.
-+
- config HAVE_PCSPKR_PLATFORM
- 	bool
- 
---- a/kernel/kallsyms.c
-+++ b/kernel/kallsyms.c
-@@ -75,6 +75,11 @@ static unsigned int kallsyms_expand_symb
- 	 * For every byte on the compressed symbol data, copy the table
- 	 * entry for that byte.
- 	 */
-+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
-+	memcpy(result, data + 1, len - 1);
-+	result += len - 1;
-+	len = 0;
-+#endif
- 	while (len) {
- 		tptr = &kallsyms_token_table[kallsyms_token_index[*data]];
- 		data++;
-@@ -107,6 +112,9 @@ tail:
-  */
- static char kallsyms_get_symbol_type(unsigned int off)
- {
-+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
-+	return kallsyms_names[off + 1];
-+#endif
- 	/*
- 	 * Get just the first code, look it up in the token table,
- 	 * and return the first char from this token.
---- a/scripts/kallsyms.c
-+++ b/scripts/kallsyms.c
-@@ -59,6 +59,7 @@ static struct addr_range percpu_range =
- static struct sym_entry *table;
- static unsigned int table_size, table_cnt;
- static int all_symbols = 0;
-+static int uncompressed = 0;
- static int absolute_percpu = 0;
- static int base_relative = 0;
- 
-@@ -440,6 +441,9 @@ static void write_src(void)
- 
- 	free(markers);
- 
-+	if (uncompressed)
-+		return;
-+
- 	output_label("kallsyms_token_table");
- 	off = 0;
- 	for (i = 0; i < 256; i++) {
-@@ -500,6 +504,9 @@ static void *find_token(unsigned char *s
- {
- 	int i;
- 
-+	if (uncompressed)
-+		return NULL;
-+
- 	for (i = 0; i < len - 1; i++) {
- 		if (str[i] == token[0] && str[i+1] == token[1])
- 			return &str[i];
-@@ -572,6 +579,9 @@ static void optimize_result(void)
- {
- 	int i, best;
- 
-+	if (uncompressed)
-+		return;
-+
- 	/* using the '\0' symbol last allows compress_symbols to use standard
- 	 * fast string functions */
- 	for (i = 255; i >= 0; i--) {
-@@ -751,6 +761,8 @@ int main(int argc, char **argv)
- 				absolute_percpu = 1;
- 			else if (strcmp(argv[i], "--base-relative") == 0)
- 				base_relative = 1;
-+			else if (strcmp(argv[i], "--uncompressed") == 0)
-+				uncompressed = 1;
- 			else
- 				usage();
- 		}
---- a/scripts/link-vmlinux.sh
-+++ b/scripts/link-vmlinux.sh
-@@ -160,6 +160,10 @@ kallsyms()
- 		kallsymopt="${kallsymopt} --base-relative"
- 	fi
- 
-+	if [ -n "${CONFIG_KALLSYMS_UNCOMPRESSED}" ]; then
-+		kallsymopt="${kallsymopt} --uncompressed"
-+	fi
-+
- 	local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL}               \
- 		      ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}"
- 
diff --git a/target/linux/generic/pending-5.4/205-backtrace_module_info.patch b/target/linux/generic/pending-5.4/205-backtrace_module_info.patch
deleted file mode 100644
index 6048c25957..0000000000
--- a/target/linux/generic/pending-5.4/205-backtrace_module_info.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: when KALLSYMS is disabled, print module address + size for matching backtrace entries
-
-[john@phrozen.org: felix will add this to his upstream queue]
-
-lede-commit 53827cdc824556cda910b23ce5030c363b8f1461
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- lib/vsprintf.c | 15 +++++++++++----
- 1 file changed, 11 insertions(+), 4 deletions(-)
-
---- a/lib/vsprintf.c
-+++ b/lib/vsprintf.c
-@@ -940,8 +940,10 @@ char *symbol_string(char *buf, char *end
- 		    struct printf_spec spec, const char *fmt)
- {
- 	unsigned long value;
--#ifdef CONFIG_KALLSYMS
- 	char sym[KSYM_SYMBOL_LEN];
-+#ifndef CONFIG_KALLSYMS
-+	struct module *mod;
-+	int len;
- #endif
- 
- 	if (fmt[1] == 'R')
-@@ -958,8 +960,14 @@ char *symbol_string(char *buf, char *end
- 
- 	return string_nocheck(buf, end, sym, spec);
- #else
--	return special_hex_number(buf, end, value, sizeof(void *));
-+	len = snprintf(sym, sizeof(sym), "0x%lx", value);
-+	mod = __module_address(value);
-+	if (mod)
-+		snprintf(sym + len, sizeof(sym) - len, " [%s@%p+0x%x]",
-+			 mod->name, mod->core_layout.base,
-+			 mod->core_layout.size);
- #endif
-+	return string(buf, end, sym, spec);
- }
- 
- static const struct printf_spec default_str_spec = {
diff --git a/target/linux/generic/pending-5.4/240-remove-unsane-filenames-from-deps_initramfs-list.patch b/target/linux/generic/pending-5.4/240-remove-unsane-filenames-from-deps_initramfs-list.patch
deleted file mode 100644
index 7d890d3e8b..0000000000
--- a/target/linux/generic/pending-5.4/240-remove-unsane-filenames-from-deps_initramfs-list.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: usr: sanitize deps_initramfs list
-
-If any filename in the intramfs dependency
-list contains a colon, that causes a kernel
-build error like this:
-
-/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns.  Stop.
-make[5]: *** [usr] Error 2
-
-Fix it by removing such filenames from the
-deps_initramfs list.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- usr/Makefile | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/usr/Makefile
-+++ b/usr/Makefile
-@@ -42,21 +42,23 @@ ifneq ($(wildcard $(obj)/$(datafile_d_y)
- 	include $(obj)/$(datafile_d_y)
- endif
- 
-+deps_initramfs_sane := $(foreach v,$(deps_initramfs),$(if $(findstring :,$(v)),,$(v)))
-+
- quiet_cmd_initfs = GEN     $@
-       cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input)
- 
- targets := $(datafile_y)
- 
- # do not try to update files included in initramfs
--$(deps_initramfs): ;
-+$(deps_initramfs_sane): ;
- 
--$(deps_initramfs): klibcdirs
-+$(deps_initramfs_sane): klibcdirs
- # We rebuild initramfs_data.cpio if:
- # 1) Any included file is newer than initramfs_data.cpio
- # 2) There are changes in which files are included (added or deleted)
- # 3) If gen_init_cpio are newer than initramfs_data.cpio
- # 4) Arguments to gen_initramfs.sh changes
--$(obj)/$(datafile_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs
-+$(obj)/$(datafile_y): $(obj)/gen_init_cpio $(deps_initramfs_sane) klibcdirs
- 	$(Q)$(initramfs) -l $(ramfs-input) > $(obj)/$(datafile_d_y)
- 	$(call if_changed,initfs)
- 
diff --git a/target/linux/generic/pending-5.4/261-enable_wilink_platform_without_drivers.patch b/target/linux/generic/pending-5.4/261-enable_wilink_platform_without_drivers.patch
deleted file mode 100644
index c4cf2cceb7..0000000000
--- a/target/linux/generic/pending-5.4/261-enable_wilink_platform_without_drivers.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Imre Kaloz <kaloz@openwrt.org>
-Subject: [PATCH] hack: net: wireless: make the wl12xx glue code available with
- compat-wireless, too
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- drivers/net/wireless/ti/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ti/Kconfig
-+++ b/drivers/net/wireless/ti/Kconfig
-@@ -20,7 +20,7 @@ source "drivers/net/wireless/ti/wlcore/K
- 
- config WILINK_PLATFORM_DATA
- 	bool "TI WiLink platform data"
--	depends on WLCORE_SDIO || WL1251_SDIO
-+	depends on WLCORE_SDIO || WL1251_SDIO || ARCH_OMAP2PLUS
- 	default y
- 	---help---
- 	Small platform data bit needed to pass data to the sdio modules.
diff --git a/target/linux/generic/pending-5.4/270-platform-mikrotik-build-bits.patch b/target/linux/generic/pending-5.4/270-platform-mikrotik-build-bits.patch
deleted file mode 100644
index df738ef97b..0000000000
--- a/target/linux/generic/pending-5.4/270-platform-mikrotik-build-bits.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From c2deb5ef01a0ef09088832744cbace9e239a6ee0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Thibaut=20VAR=C3=88NE?= <hacks@slashdirt.org>
-Date: Sat, 28 Mar 2020 12:11:50 +0100
-Subject: [PATCH] generic: platform/mikrotik build bits (5.4)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch adds platform/mikrotik kernel build bits
-
-Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
----
- drivers/platform/Kconfig  | 2 ++
- drivers/platform/Makefile | 1 +
- 2 files changed, 3 insertions(+)
-
---- a/drivers/platform/Kconfig
-+++ b/drivers/platform/Kconfig
-@@ -13,3 +13,5 @@ source "drivers/platform/chrome/Kconfig"
- source "drivers/platform/mellanox/Kconfig"
- 
- source "drivers/platform/olpc/Kconfig"
-+
-+source "drivers/platform/mikrotik/Kconfig"
---- a/drivers/platform/Makefile
-+++ b/drivers/platform/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_MIPS)		+= mips/
- obj-$(CONFIG_OLPC_EC)		+= olpc/
- obj-$(CONFIG_GOLDFISH)		+= goldfish/
- obj-$(CONFIG_CHROME_PLATFORMS)	+= chrome/
-+obj-$(CONFIG_MIKROTIK)		+= mikrotik/
diff --git a/target/linux/generic/pending-5.4/300-mips_expose_boot_raw.patch b/target/linux/generic/pending-5.4/300-mips_expose_boot_raw.patch
deleted file mode 100644
index e16e34f1f9..0000000000
--- a/target/linux/generic/pending-5.4/300-mips_expose_boot_raw.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From: Mark Miller <mark@mirell.org>
-Subject: mips: expose CONFIG_BOOT_RAW
-
-This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on
-certain Broadcom chipsets running CFE in order to load the kernel.
-
-Signed-off-by: Mark Miller <mark@mirell.org>
-Acked-by: Rob Landley <rob@landley.net>
----
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1074,9 +1074,6 @@ config FW_ARC
- config ARCH_MAY_HAVE_PC_FDC
- 	bool
- 
--config BOOT_RAW
--	bool
--
- config CEVT_BCM1480
- 	bool
- 
-@@ -3050,6 +3047,18 @@ choice
- 		bool "Extend builtin kernel arguments with bootloader arguments"
- endchoice
- 
-+config BOOT_RAW
-+	bool "Enable the kernel to be executed from the load address"
-+	default n
-+	help
-+	 Allow the kernel to be executed from the load address for
-+	 bootloaders which cannot read the ELF format. This places
-+	 a jump to start_kernel at the load address.
-+
-+	 If unsure, say N.
-+
-+
-+
- endmenu
- 
- config LOCKDEP_SUPPORT
diff --git a/target/linux/generic/pending-5.4/302-mips_no_branch_likely.patch b/target/linux/generic/pending-5.4/302-mips_no_branch_likely.patch
deleted file mode 100644
index bf1b489111..0000000000
--- a/target/linux/generic/pending-5.4/302-mips_no_branch_likely.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mips: use -mno-branch-likely for kernel and userspace
-
-saves ~11k kernel size after lzma and ~12k squashfs size in the
-
-lede-commit: 41a039f46450ffae9483d6216422098669da2900
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -92,7 +92,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- # machines may also.  Since BFD is incredibly buggy with respect to
- # crossformat linking we rely on the elf2ecoff tool for format conversion.
- #
--cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
-+cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
- cflags-y			+= -msoft-float
- LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
- KBUILD_AFLAGS_MODULE		+= -mlong-calls
diff --git a/target/linux/generic/pending-5.4/305-mips_module_reloc.patch b/target/linux/generic/pending-5.4/305-mips_module_reloc.patch
deleted file mode 100644
index 40a219f5d2..0000000000
--- a/target/linux/generic/pending-5.4/305-mips_module_reloc.patch
+++ /dev/null
@@ -1,371 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mips: replace -mlong-calls with -mno-long-calls to make function calls faster in kernel modules to achieve this, try to
-
-lede-commit: 3b3d64743ba2a874df9d70cd19e242205b0a788c
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile             |   5 +
- arch/mips/include/asm/module.h |   5 +
- arch/mips/kernel/module.c      | 279 ++++++++++++++++++++++++++++++++++++++++-
- 3 files changed, 284 insertions(+), 5 deletions(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -95,8 +95,18 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
- cflags-y			+= -msoft-float
- LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
-+ifdef CONFIG_64BIT
- KBUILD_AFLAGS_MODULE		+= -mlong-calls
- KBUILD_CFLAGS_MODULE		+= -mlong-calls
-+else
-+  ifdef CONFIG_DYNAMIC_FTRACE
-+    KBUILD_AFLAGS_MODULE	+= -mlong-calls
-+    KBUILD_CFLAGS_MODULE	+= -mlong-calls
-+  else
-+    KBUILD_AFLAGS_MODULE	+= -mno-long-calls
-+    KBUILD_CFLAGS_MODULE	+= -mno-long-calls
-+  endif
-+endif
- 
- ifeq ($(CONFIG_RELOCATABLE),y)
- LDFLAGS_vmlinux			+= --emit-relocs
---- a/arch/mips/include/asm/module.h
-+++ b/arch/mips/include/asm/module.h
-@@ -12,6 +12,11 @@ struct mod_arch_specific {
- 	const struct exception_table_entry *dbe_start;
- 	const struct exception_table_entry *dbe_end;
- 	struct mips_hi16 *r_mips_hi16_list;
-+
-+	void *phys_plt_tbl;
-+	void *virt_plt_tbl;
-+	unsigned int phys_plt_offset;
-+	unsigned int virt_plt_offset;
- };
- 
- typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
---- a/arch/mips/kernel/module.c
-+++ b/arch/mips/kernel/module.c
-@@ -32,14 +32,221 @@ struct mips_hi16 {
- static LIST_HEAD(dbe_list);
- static DEFINE_SPINLOCK(dbe_lock);
- 
--#ifdef MODULE_START
-+/*
-+ * Get the potential max trampolines size required of the init and
-+ * non-init sections. Only used if we cannot find enough contiguous
-+ * physically mapped memory to put the module into.
-+ */
-+static unsigned int
-+get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-+             const char *secstrings, unsigned int symindex, bool is_init)
-+{
-+	unsigned long ret = 0;
-+	unsigned int i, j;
-+	Elf_Sym *syms;
-+
-+	/* Everything marked ALLOC (this includes the exported symbols) */
-+	for (i = 1; i < hdr->e_shnum; ++i) {
-+		unsigned int info = sechdrs[i].sh_info;
-+
-+		if (sechdrs[i].sh_type != SHT_REL
-+		    && sechdrs[i].sh_type != SHT_RELA)
-+			continue;
-+
-+		/* Not a valid relocation section? */
-+		if (info >= hdr->e_shnum)
-+			continue;
-+
-+		/* Don't bother with non-allocated sections */
-+		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
-+			continue;
-+
-+		/* If it's called *.init*, and we're not init, we're
-+                   not interested */
-+		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
-+		    != is_init)
-+			continue;
-+
-+		syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
-+		if (sechdrs[i].sh_type == SHT_REL) {
-+			Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
-+			unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
-+
-+			for (j = 0; j < size; ++j) {
-+				Elf_Sym *sym;
-+
-+				if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
-+					continue;
-+
-+				sym = syms + ELF_MIPS_R_SYM(rel[j]);
-+				if (!is_init && sym->st_shndx != SHN_UNDEF)
-+					continue;
-+
-+				ret += 4 * sizeof(int);
-+			}
-+		} else {
-+			Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
-+			unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
-+
-+			for (j = 0; j < size; ++j) {
-+				Elf_Sym *sym;
-+
-+				if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
-+					continue;
-+
-+				sym = syms + ELF_MIPS_R_SYM(rela[j]);
-+				if (!is_init && sym->st_shndx != SHN_UNDEF)
-+					continue;
-+
-+				ret += 4 * sizeof(int);
-+			}
-+		}
-+	}
-+
-+	return ret;
-+}
-+
-+#ifndef MODULE_START
-+static void *alloc_phys(unsigned long size)
-+{
-+	unsigned order;
-+	struct page *page;
-+	struct page *p;
-+
-+	size = PAGE_ALIGN(size);
-+	order = get_order(size);
-+
-+	page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
-+			__GFP_THISNODE, order);
-+	if (!page)
-+		return NULL;
-+
-+	split_page(page, order);
-+
-+	/* mark all pages except for the last one */
-+	for (p = page; p + 1 < page + (size >> PAGE_SHIFT); ++p)
-+		set_bit(PG_owner_priv_1, &p->flags);
-+
-+	for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
-+		__free_page(p);
-+
-+	return page_address(page);
-+}
-+#endif
-+
-+static void free_phys(void *ptr)
-+{
-+	struct page *page;
-+	bool free;
-+
-+	page = virt_to_page(ptr);
-+	do {
-+		free = test_and_clear_bit(PG_owner_priv_1, &page->flags);
-+		__free_page(page);
-+		page++;
-+	} while (free);
-+}
-+
-+
- void *module_alloc(unsigned long size)
- {
-+#ifdef MODULE_START
- 	return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END,
- 				GFP_KERNEL, PAGE_KERNEL, 0, NUMA_NO_NODE,
- 				__builtin_return_address(0));
-+#else
-+	void *ptr;
-+
-+	if (size == 0)
-+		return NULL;
-+
-+	ptr = alloc_phys(size);
-+
-+	/* If we failed to allocate physically contiguous memory,
-+	 * fall back to regular vmalloc. The module loader code will
-+	 * create jump tables to handle long jumps */
-+	if (!ptr)
-+		return vmalloc(size);
-+
-+	return ptr;
-+#endif
- }
-+
-+static inline bool is_phys_addr(void *ptr)
-+{
-+#ifdef CONFIG_64BIT
-+	return (KSEGX((unsigned long)ptr) == CKSEG0);
-+#else
-+	return (KSEGX(ptr) == KSEG0);
- #endif
-+}
-+
-+/* Free memory returned from module_alloc */
-+void module_memfree(void *module_region)
-+{
-+	if (is_phys_addr(module_region))
-+		free_phys(module_region);
-+	else
-+		vfree(module_region);
-+}
-+
-+static void *__module_alloc(int size, bool phys)
-+{
-+	void *ptr;
-+
-+	if (phys)
-+		ptr = kmalloc(size, GFP_KERNEL);
-+	else
-+		ptr = vmalloc(size);
-+	return ptr;
-+}
-+
-+static void __module_free(void *ptr)
-+{
-+	if (is_phys_addr(ptr))
-+		kfree(ptr);
-+	else
-+		vfree(ptr);
-+}
-+
-+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
-+			      char *secstrings, struct module *mod)
-+{
-+	unsigned int symindex = 0;
-+	unsigned int core_size, init_size;
-+	int i;
-+
-+	mod->arch.phys_plt_offset = 0;
-+	mod->arch.virt_plt_offset = 0;
-+	mod->arch.phys_plt_tbl = NULL;
-+	mod->arch.virt_plt_tbl = NULL;
-+
-+	if (IS_ENABLED(CONFIG_64BIT))
-+		return 0;
-+
-+	for (i = 1; i < hdr->e_shnum; i++)
-+		if (sechdrs[i].sh_type == SHT_SYMTAB)
-+			symindex = i;
-+
-+	core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
-+	init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
-+
-+	if ((core_size + init_size) == 0)
-+		return 0;
-+
-+	mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
-+	if (!mod->arch.phys_plt_tbl)
-+		return -ENOMEM;
-+
-+	mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
-+	if (!mod->arch.virt_plt_tbl) {
-+		__module_free(mod->arch.phys_plt_tbl);
-+		mod->arch.phys_plt_tbl = NULL;
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
- 
- static int apply_r_mips_none(struct module *me, u32 *location,
- 			     u32 base, Elf_Addr v, bool rela)
-@@ -55,9 +262,40 @@ static int apply_r_mips_32(struct module
- 	return 0;
- }
- 
-+static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
-+				 void *start, Elf_Addr v)
-+{
-+	unsigned *tramp = start + *plt_offset;
-+	*plt_offset += 4 * sizeof(int);
-+
-+	/* adjust carry for addiu */
-+	if (v & 0x00008000)
-+		v += 0x10000;
-+
-+	tramp[0] = 0x3c190000 | (v >> 16);      /* lui t9, hi16 */
-+	tramp[1] = 0x27390000 | (v & 0xffff);   /* addiu t9, t9, lo16 */
-+	tramp[2] = 0x03200008;                  /* jr t9 */
-+	tramp[3] = 0x00000000;                  /* nop */
-+
-+	return (Elf_Addr) tramp;
-+}
-+
-+static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
-+{
-+	if (is_phys_addr(location))
-+		return add_plt_entry_to(&me->arch.phys_plt_offset,
-+				me->arch.phys_plt_tbl, v);
-+	else
-+		return add_plt_entry_to(&me->arch.virt_plt_offset,
-+				me->arch.virt_plt_tbl, v);
-+
-+}
-+
- static int apply_r_mips_26(struct module *me, u32 *location,
- 			   u32 base, Elf_Addr v, bool rela)
- {
-+	u32 ofs = base & 0x03ffffff;
-+
- 	if (v % 4) {
- 		pr_err("module %s: dangerous R_MIPS_26 relocation\n",
- 		       me->name);
-@@ -65,13 +303,17 @@ static int apply_r_mips_26(struct module
- 	}
- 
- 	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
--		pr_err("module %s: relocation overflow\n",
--		       me->name);
--		return -ENOEXEC;
-+		v = add_plt_entry(me, location, v + (ofs << 2));
-+		if (!v) {
-+			pr_err("module %s: relocation overflow\n",
-+			       me->name);
-+			return -ENOEXEC;
-+		}
-+		ofs = 0;
- 	}
- 
- 	*location = (*location & ~0x03ffffff) |
--		    ((base + (v >> 2)) & 0x03ffffff);
-+		    ((ofs + (v >> 2)) & 0x03ffffff);
- 
- 	return 0;
- }
-@@ -447,9 +689,36 @@ int module_finalize(const Elf_Ehdr *hdr,
- 		list_add(&me->arch.dbe_list, &dbe_list);
- 		spin_unlock_irq(&dbe_lock);
- 	}
-+
-+	/* Get rid of the fixup trampoline if we're running the module
-+	 * from physically mapped address space */
-+	if (me->arch.phys_plt_offset == 0) {
-+		__module_free(me->arch.phys_plt_tbl);
-+		me->arch.phys_plt_tbl = NULL;
-+	}
-+	if (me->arch.virt_plt_offset == 0) {
-+		__module_free(me->arch.virt_plt_tbl);
-+		me->arch.virt_plt_tbl = NULL;
-+	}
-+
- 	return 0;
- }
- 
-+void module_arch_freeing_init(struct module *mod)
-+{
-+	if (mod->state == MODULE_STATE_LIVE)
-+		return;
-+
-+	if (mod->arch.phys_plt_tbl) {
-+		__module_free(mod->arch.phys_plt_tbl);
-+		mod->arch.phys_plt_tbl = NULL;
-+	}
-+	if (mod->arch.virt_plt_tbl) {
-+		__module_free(mod->arch.virt_plt_tbl);
-+		mod->arch.virt_plt_tbl = NULL;
-+	}
-+}
-+
- void module_arch_cleanup(struct module *mod)
- {
- 	spin_lock_irq(&dbe_lock);
diff --git a/target/linux/generic/pending-5.4/307-mips_highmem_offset.patch b/target/linux/generic/pending-5.4/307-mips_highmem_offset.patch
deleted file mode 100644
index 9dd2fa9863..0000000000
--- a/target/linux/generic/pending-5.4/307-mips_highmem_offset.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: adjust mips highmem offset to avoid the need for -mlong-calls on systems with >256M RAM
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/include/asm/mach-generic/spaces.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-generic/spaces.h
-+++ b/arch/mips/include/asm/mach-generic/spaces.h
-@@ -50,7 +50,7 @@
-  * Memory above this physical address will be considered highmem.
-  */
- #ifndef HIGHMEM_START
--#define HIGHMEM_START		_AC(0x20000000, UL)
-+#define HIGHMEM_START		_AC(0x10000000, UL)
- #endif
- 
- #endif /* CONFIG_32BIT */
diff --git a/target/linux/generic/pending-5.4/308-mips32r2_tune.patch b/target/linux/generic/pending-5.4/308-mips32r2_tune.patch
deleted file mode 100644
index 8636511464..0000000000
--- a/target/linux/generic/pending-5.4/308-mips32r2_tune.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add -mtune=34kc to MIPS CFLAGS when building for mips32r2
-
-This provides a good tradeoff across at least 24Kc-74Kc, while also
-producing smaller code.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -177,7 +177,7 @@ cflags-$(CONFIG_CPU_VR41XX)	+= -march=r4
- cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
- cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS32_R1)	+= -march=mips32 -Wa,--trap
--cflags-$(CONFIG_CPU_MIPS32_R2)	+= -march=mips32r2 -Wa,--trap
-+cflags-$(CONFIG_CPU_MIPS32_R2)	+= -march=mips32r2 -mtune=34kc -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS32_R6)	+= -march=mips32r6 -Wa,--trap -modd-spreg
- cflags-$(CONFIG_CPU_MIPS64_R1)	+= -march=mips64 -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS64_R2)	+= -march=mips64r2 -Wa,--trap
diff --git a/target/linux/generic/pending-5.4/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch b/target/linux/generic/pending-5.4/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch
deleted file mode 100644
index e4075a24bd..0000000000
--- a/target/linux/generic/pending-5.4/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From 87ec87c2ad615c1a177cd08ef5fa29fc739f6e50 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 23 Dec 2018 18:06:53 +0100
-Subject: [PATCH] MIPS: Add CPU option reporting to /proc/cpuinfo
-
-Many MIPS CPUs have optional CPU features which are not activates for
-all CPU cores. Print the CPU options which are implemented in the core
-in /proc/cpuinfo. This makes it possible to see what features are
-supported and which are not supported. This should cover all standard
-MIPS extensions, before it only printed information about the main MIPS
-ASEs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/kernel/proc.c | 116 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 116 insertions(+)
-
---- a/arch/mips/kernel/proc.c
-+++ b/arch/mips/kernel/proc.c
-@@ -134,6 +134,122 @@ static int show_cpuinfo(struct seq_file
- 		seq_printf(m, "micromips kernel\t: %s\n",
- 		      (read_c0_config3() & MIPS_CONF3_ISA_OE) ?  "yes" : "no");
- 	}
-+
-+	seq_printf(m, "Options implemented\t:");
-+	if (cpu_has_tlb)
-+		seq_printf(m, "%s", " tlb");
-+	if (cpu_has_ftlb)
-+		seq_printf(m, "%s", " ftlb");
-+	if (cpu_has_tlbinv)
-+		seq_printf(m, "%s", " tlbinv");
-+	if (cpu_has_segments)
-+		seq_printf(m, "%s", " segments");
-+	if (cpu_has_rixiex)
-+		seq_printf(m, "%s", " rixiex");
-+	if (cpu_has_ldpte)
-+		seq_printf(m, "%s", " ldpte");
-+	if (cpu_has_maar)
-+		seq_printf(m, "%s", " maar");
-+	if (cpu_has_rw_llb)
-+		seq_printf(m, "%s", " rw_llb");
-+	if (cpu_has_4kex)
-+		seq_printf(m, "%s", " 4kex");
-+	if (cpu_has_3k_cache)
-+		seq_printf(m, "%s", " 3k_cache");
-+	if (cpu_has_4k_cache)
-+		seq_printf(m, "%s", " 4k_cache");
-+	if (cpu_has_6k_cache)
-+		seq_printf(m, "%s", " 6k_cache");
-+	if (cpu_has_8k_cache)
-+		seq_printf(m, "%s", " 8k_cache");
-+	if (cpu_has_tx39_cache)
-+		seq_printf(m, "%s", " tx39_cache");
-+	if (cpu_has_octeon_cache)
-+		seq_printf(m, "%s", " octeon_cache");
-+	if (cpu_has_fpu)
-+		seq_printf(m, "%s", " fpu");
-+	if (cpu_has_32fpr)
-+		seq_printf(m, "%s", " 32fpr");
-+	if (cpu_has_cache_cdex_p)
-+		seq_printf(m, "%s", " cache_cdex_p");
-+	if (cpu_has_cache_cdex_s)
-+		seq_printf(m, "%s", " cache_cdex_s");
-+	if (cpu_has_prefetch)
-+		seq_printf(m, "%s", " prefetch");
-+	if (cpu_has_mcheck)
-+		seq_printf(m, "%s", " mcheck");
-+	if (cpu_has_ejtag)
-+		seq_printf(m, "%s", " ejtag");
-+	if (cpu_has_llsc)
-+		seq_printf(m, "%s", " llsc");
-+	if (cpu_has_bp_ghist)
-+		seq_printf(m, "%s", " bp_ghist");
-+	if (cpu_has_guestctl0ext)
-+		seq_printf(m, "%s", " guestctl0ext");
-+	if (cpu_has_guestctl1)
-+		seq_printf(m, "%s", " guestctl1");
-+	if (cpu_has_guestctl2)
-+		seq_printf(m, "%s", " guestctl2");
-+	if (cpu_has_guestid)
-+		seq_printf(m, "%s", " guestid");
-+	if (cpu_has_drg)
-+		seq_printf(m, "%s", " drg");
-+	if (cpu_has_rixi)
-+		seq_printf(m, "%s", " rixi");
-+	if (cpu_has_lpa)
-+		seq_printf(m, "%s", " lpa");
-+	if (cpu_has_mvh)
-+		seq_printf(m, "%s", " mvh");
-+	if (cpu_has_vtag_icache)
-+		seq_printf(m, "%s", " vtag_icache");
-+	if (cpu_has_dc_aliases)
-+		seq_printf(m, "%s", " dc_aliases");
-+	if (cpu_has_ic_fills_f_dc)
-+		seq_printf(m, "%s", " ic_fills_f_dc");
-+	if (cpu_has_pindexed_dcache)
-+		seq_printf(m, "%s", " pindexed_dcache");
-+	if (cpu_has_userlocal)
-+		seq_printf(m, "%s", " userlocal");
-+	if (cpu_has_nofpuex)
-+		seq_printf(m, "%s", " nofpuex");
-+	if (cpu_has_vint)
-+		seq_printf(m, "%s", " vint");
-+	if (cpu_has_veic)
-+		seq_printf(m, "%s", " veic");
-+	if (cpu_has_inclusive_pcaches)
-+		seq_printf(m, "%s", " inclusive_pcaches");
-+	if (cpu_has_perf_cntr_intr_bit)
-+		seq_printf(m, "%s", " perf_cntr_intr_bit");
-+	if (cpu_has_ufr)
-+		seq_printf(m, "%s", " ufr");
-+	if (cpu_has_fre)
-+		seq_printf(m, "%s", " fre");
-+	if (cpu_has_cdmm)
-+		seq_printf(m, "%s", " cdmm");
-+	if (cpu_has_small_pages)
-+		seq_printf(m, "%s", " small_pages");
-+	if (cpu_has_nan_legacy)
-+		seq_printf(m, "%s", " nan_legacy");
-+	if (cpu_has_nan_2008)
-+		seq_printf(m, "%s", " nan_2008");
-+	if (cpu_has_ebase_wg)
-+		seq_printf(m, "%s", " ebase_wg");
-+	if (cpu_has_badinstr)
-+		seq_printf(m, "%s", " badinstr");
-+	if (cpu_has_badinstrp)
-+		seq_printf(m, "%s", " badinstrp");
-+	if (cpu_has_contextconfig)
-+		seq_printf(m, "%s", " contextconfig");
-+	if (cpu_has_perf)
-+		seq_printf(m, "%s", " perf");
-+	if (cpu_has_shared_ftlb_ram)
-+		seq_printf(m, "%s", " shared_ftlb_ram");
-+	if (cpu_has_shared_ftlb_entries)
-+		seq_printf(m, "%s", " shared_ftlb_entries");
-+	if (cpu_has_mipsmt_pertccounters)
-+		seq_printf(m, "%s", " mipsmt_pertccounters");
-+	seq_printf(m, "\n");
-+
- 	seq_printf(m, "shadow register sets\t: %d\n",
- 		      cpu_data[n].srsets);
- 	seq_printf(m, "kscratch registers\t: %d\n",
diff --git a/target/linux/generic/pending-5.4/310-arm_module_unresolved_weak_sym.patch b/target/linux/generic/pending-5.4/310-arm_module_unresolved_weak_sym.patch
deleted file mode 100644
index 24807f78d3..0000000000
--- a/target/linux/generic/pending-5.4/310-arm_module_unresolved_weak_sym.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: fix errors in unresolved weak symbols on arm
-
-lede-commit: 570699d4838a907c3ef9f2819bf19eb72997b32f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/arm/kernel/module.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm/kernel/module.c
-+++ b/arch/arm/kernel/module.c
-@@ -99,6 +99,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
- 			return -ENOEXEC;
- 		}
- 
-+		if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
-+		    ELF_ST_BIND(sym->st_info) == STB_WEAK)
-+			continue;
-+
- 		loc = dstsec->sh_addr + rel->r_offset;
- 
- 		switch (ELF32_R_TYPE(rel->r_info)) {
diff --git a/target/linux/generic/pending-5.4/311-MIPS-zboot-put-appended-dtb-into-a-section.patch b/target/linux/generic/pending-5.4/311-MIPS-zboot-put-appended-dtb-into-a-section.patch
deleted file mode 100644
index 3f8808f702..0000000000
--- a/target/linux/generic/pending-5.4/311-MIPS-zboot-put-appended-dtb-into-a-section.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 7d1531c81c0fb4c93bea8dc316043ad0e4d0c270 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Sun, 25 Oct 2020 23:19:40 +0800
-Subject: [PATCH] MIPS: zboot: put appended dtb into a section
-
-This will make a separated section for dtb appear in ELF, and we can
-then use objcopy to patch a dtb into vmlinuz when RAW_APPENDED_DTB
-is set in kernel config.
-
-command to patch a dtb:
-objcopy --set-section-flags=.appended_dtb=alloc,contents \
-        --update-section=.appended_dtb=<target>.dtb vmlinuz vmlinuz-dtb
-
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
----
- arch/mips/boot/compressed/ld.script | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/arch/mips/boot/compressed/ld.script
-+++ b/arch/mips/boot/compressed/ld.script
-@@ -31,9 +31,12 @@ SECTIONS
- 		CONSTRUCTORS
- 		. = ALIGN(16);
- 	}
--	__appended_dtb = .;
--	/* leave space for appended DTB */
--	. += 0x100000;
-+
-+	.appended_dtb : {
-+		__appended_dtb = .;
-+		/* leave space for appended DTB */
-+		. += 0x100000;
-+	}
- 
- 	_edata = .;
- 	/* End of data section */
diff --git a/target/linux/generic/pending-5.4/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch b/target/linux/generic/pending-5.4/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
deleted file mode 100644
index 2808c95322..0000000000
--- a/target/linux/generic/pending-5.4/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
+++ /dev/null
@@ -1,281 +0,0 @@
-From: Yousong Zhou <yszhou4tech@gmail.com>
-Subject: MIPS: kexec: Accept command line parameters from userspace.
-
-Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
----
- arch/mips/kernel/machine_kexec.c   |  153 +++++++++++++++++++++++++++++++-----
- arch/mips/kernel/machine_kexec.h   |   20 +++++
- arch/mips/kernel/relocate_kernel.S |   21 +++--
- 3 files changed, 167 insertions(+), 27 deletions(-)
- create mode 100644 arch/mips/kernel/machine_kexec.h
-
---- a/arch/mips/kernel/machine_kexec.c
-+++ b/arch/mips/kernel/machine_kexec.c
-@@ -9,14 +9,11 @@
- #include <linux/delay.h>
- #include <linux/libfdt.h>
- 
-+#include <asm/bootinfo.h>
- #include <asm/cacheflush.h>
- #include <asm/page.h>
--
--extern const unsigned char relocate_new_kernel[];
--extern const size_t relocate_new_kernel_size;
--
--extern unsigned long kexec_start_address;
--extern unsigned long kexec_indirection_page;
-+#include <linux/uaccess.h>
-+#include "machine_kexec.h"
- 
- static unsigned long reboot_code_buffer;
- 
-@@ -30,6 +27,101 @@ void (*_crash_smp_send_stop)(void) = NUL
- void (*_machine_kexec_shutdown)(void) = NULL;
- void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL;
- 
-+static void machine_kexec_print_args(void)
-+{
-+	unsigned long argc = (int)kexec_args[0];
-+	int i;
-+
-+	pr_info("kexec_args[0] (argc): %lu\n", argc);
-+	pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]);
-+	pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]);
-+	pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
-+
-+	for (i = 0; i < argc; i++) {
-+		pr_info("kexec_argv[%d] = %p, %s\n",
-+				i, kexec_argv[i], kexec_argv[i]);
-+	}
-+}
-+
-+static void machine_kexec_init_argv(struct kimage *image)
-+{
-+	void __user *buf = NULL;
-+	size_t bufsz;
-+	size_t size;
-+	int i;
-+
-+	bufsz = 0;
-+	for (i = 0; i < image->nr_segments; i++) {
-+		struct kexec_segment *seg;
-+
-+		seg = &image->segment[i];
-+		if (seg->bufsz < 6)
-+			continue;
-+
-+		if (strncmp((char *) seg->buf, "kexec ", 6))
-+			continue;
-+
-+		buf = seg->buf;
-+		bufsz = seg->bufsz;
-+		break;
-+	}
-+
-+	if (!buf)
-+		return;
-+
-+	size = KEXEC_COMMAND_LINE_SIZE;
-+	size = min(size, bufsz);
-+	if (size < bufsz)
-+		pr_warn("kexec command line truncated to %zd bytes\n", size);
-+
-+	/* Copy to kernel space */
-+	if (copy_from_user(kexec_argv_buf, buf, size))
-+		pr_warn("kexec command line copy to kernel space failed\n");
-+
-+	kexec_argv_buf[size - 1] = 0;
-+}
-+
-+static void machine_kexec_parse_argv(struct kimage *image)
-+{
-+	char *reboot_code_buffer;
-+	int reloc_delta;
-+	char *ptr;
-+	int argc;
-+	int i;
-+
-+	ptr = kexec_argv_buf;
-+	argc = 0;
-+
-+	/*
-+	 * convert command line string to array of parameters
-+	 * (as bootloader does).
-+	 */
-+	while (ptr && *ptr && (KEXEC_MAX_ARGC > argc)) {
-+		if (*ptr == ' ') {
-+			*ptr++ = '\0';
-+			continue;
-+		}
-+
-+		kexec_argv[argc++] = ptr;
-+		ptr = strchr(ptr, ' ');
-+	}
-+
-+	if (!argc)
-+		return;
-+
-+	kexec_args[0] = argc;
-+	kexec_args[1] = (unsigned long)kexec_argv;
-+	kexec_args[2] = 0;
-+	kexec_args[3] = 0;
-+
-+	reboot_code_buffer = page_address(image->control_code_page);
-+	reloc_delta = reboot_code_buffer - (char *)kexec_relocate_new_kernel;
-+
-+	kexec_args[1] += reloc_delta;
-+	for (i = 0; i < argc; i++)
-+		kexec_argv[i] += reloc_delta;
-+}
-+
- static void kexec_image_info(const struct kimage *kimage)
- {
- 	unsigned long i;
-@@ -99,6 +191,18 @@ machine_kexec_prepare(struct kimage *kim
- #endif
- 
- 	kexec_image_info(kimage);
-+	/*
-+	 * Whenever arguments passed from kexec-tools, Init the arguments as
-+	 * the original ones to try avoiding booting failure.
-+	 */
-+
-+	kexec_args[0] = fw_arg0;
-+	kexec_args[1] = fw_arg1;
-+	kexec_args[2] = fw_arg2;
-+	kexec_args[3] = fw_arg3;
-+
-+	machine_kexec_init_argv(kimage);
-+	machine_kexec_parse_argv(kimage);
- 
- 	if (_machine_kexec_prepare)
- 		return _machine_kexec_prepare(kimage);
-@@ -161,7 +265,7 @@ machine_crash_shutdown(struct pt_regs *r
- void kexec_nonboot_cpu_jump(void)
- {
- 	local_flush_icache_range((unsigned long)relocated_kexec_smp_wait,
--				 reboot_code_buffer + relocate_new_kernel_size);
-+				 reboot_code_buffer + KEXEC_RELOCATE_NEW_KERNEL_SIZE);
- 
- 	relocated_kexec_smp_wait(NULL);
- }
-@@ -199,7 +303,7 @@ void kexec_reboot(void)
- 	 * machine_kexec() CPU.
- 	 */
- 	local_flush_icache_range(reboot_code_buffer,
--				 reboot_code_buffer + relocate_new_kernel_size);
-+				 reboot_code_buffer + KEXEC_RELOCATE_NEW_KERNEL_SIZE);
- 
- 	do_kexec = (void *)reboot_code_buffer;
- 	do_kexec();
-@@ -212,10 +316,12 @@ machine_kexec(struct kimage *image)
- 	unsigned long *ptr;
- 
- 	reboot_code_buffer =
--	  (unsigned long)page_address(image->control_code_page);
-+		(unsigned long)page_address(image->control_code_page);
-+	pr_info("reboot_code_buffer = %p\n", (void *)reboot_code_buffer);
- 
- 	kexec_start_address =
- 		(unsigned long) phys_to_virt(image->start);
-+	pr_info("kexec_start_address = %p\n", (void *)kexec_start_address);
- 
- 	if (image->type == KEXEC_TYPE_DEFAULT) {
- 		kexec_indirection_page =
-@@ -223,9 +329,19 @@ machine_kexec(struct kimage *image)
- 	} else {
- 		kexec_indirection_page = (unsigned long)&image->head;
- 	}
-+	pr_info("kexec_indirection_page = %p\n", (void *)kexec_indirection_page);
- 
--	memcpy((void*)reboot_code_buffer, relocate_new_kernel,
--	       relocate_new_kernel_size);
-+	pr_info("Where is memcpy: %p\n", memcpy);
-+	pr_info("kexec_relocate_new_kernel = %p, kexec_relocate_new_kernel_end = %p\n",
-+		(void *)kexec_relocate_new_kernel, &kexec_relocate_new_kernel_end);
-+	pr_info("Copy %lu bytes from %p to %p\n", KEXEC_RELOCATE_NEW_KERNEL_SIZE,
-+		(void *)kexec_relocate_new_kernel, (void *)reboot_code_buffer);
-+	memcpy((void*)reboot_code_buffer, kexec_relocate_new_kernel,
-+	       KEXEC_RELOCATE_NEW_KERNEL_SIZE);
-+
-+	pr_info("Before _print_args().\n");
-+	machine_kexec_print_args();
-+	pr_info("Before eval loop.\n");
- 
- 	/*
- 	 * The generic kexec code builds a page list with physical
-@@ -256,7 +372,7 @@ machine_kexec(struct kimage *image)
- #ifdef CONFIG_SMP
- 	/* All secondary cpus now may jump to kexec_wait cycle */
- 	relocated_kexec_smp_wait = reboot_code_buffer +
--		(void *)(kexec_smp_wait - relocate_new_kernel);
-+		(void *)(kexec_smp_wait - kexec_relocate_new_kernel);
- 	smp_wmb();
- 	atomic_set(&kexec_ready_to_reboot, 1);
- #endif
---- /dev/null
-+++ b/arch/mips/kernel/machine_kexec.h
-@@ -0,0 +1,20 @@
-+#ifndef _MACHINE_KEXEC_H
-+#define _MACHINE_KEXEC_H
-+
-+#ifndef __ASSEMBLY__
-+extern const unsigned char kexec_relocate_new_kernel[];
-+extern unsigned long kexec_relocate_new_kernel_end;
-+extern unsigned long kexec_start_address;
-+extern unsigned long kexec_indirection_page;
-+
-+extern char kexec_argv_buf[];
-+extern char *kexec_argv[];
-+
-+#define KEXEC_RELOCATE_NEW_KERNEL_SIZE	((unsigned long)&kexec_relocate_new_kernel_end - (unsigned long)kexec_relocate_new_kernel)
-+#endif /* !__ASSEMBLY__ */
-+
-+#define KEXEC_COMMAND_LINE_SIZE		256
-+#define KEXEC_ARGV_SIZE			(KEXEC_COMMAND_LINE_SIZE / 16)
-+#define KEXEC_MAX_ARGC			(KEXEC_ARGV_SIZE / sizeof(long))
-+
-+#endif
---- a/arch/mips/kernel/relocate_kernel.S
-+++ b/arch/mips/kernel/relocate_kernel.S
-@@ -10,8 +10,9 @@
- #include <asm/mipsregs.h>
- #include <asm/stackframe.h>
- #include <asm/addrspace.h>
-+#include "machine_kexec.h"
- 
--LEAF(relocate_new_kernel)
-+LEAF(kexec_relocate_new_kernel)
- 	PTR_L a0,	arg0
- 	PTR_L a1,	arg1
- 	PTR_L a2,	arg2
-@@ -96,7 +97,7 @@ done:
- #endif
- 	/* jump to kexec_start_address */
- 	j		s1
--	END(relocate_new_kernel)
-+	END(kexec_relocate_new_kernel)
- 
- #ifdef CONFIG_SMP
- /*
-@@ -182,9 +183,15 @@ kexec_indirection_page:
- 	PTR		0
- 	.size		kexec_indirection_page, PTRSIZE
- 
--relocate_new_kernel_end:
-+kexec_argv_buf:
-+	EXPORT(kexec_argv_buf)
-+	.skip		KEXEC_COMMAND_LINE_SIZE
-+	.size		kexec_argv_buf, KEXEC_COMMAND_LINE_SIZE
-+
-+kexec_argv:
-+	EXPORT(kexec_argv)
-+	.skip		KEXEC_ARGV_SIZE
-+	.size		kexec_argv, KEXEC_ARGV_SIZE
- 
--relocate_new_kernel_size:
--	EXPORT(relocate_new_kernel_size)
--	PTR		relocate_new_kernel_end - relocate_new_kernel
--	.size		relocate_new_kernel_size, PTRSIZE
-+kexec_relocate_new_kernel_end:
-+	EXPORT(kexec_relocate_new_kernel_end)
diff --git a/target/linux/generic/pending-5.4/332-arc-add-OWRTDTB-section.patch b/target/linux/generic/pending-5.4/332-arc-add-OWRTDTB-section.patch
deleted file mode 100644
index 4b0534eff7..0000000000
--- a/target/linux/generic/pending-5.4/332-arc-add-OWRTDTB-section.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From bb0c3b0175240bf152fd7c644821a0cf9f77c37c Mon Sep 17 00:00:00 2001
-From: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
-Date: Fri, 15 Mar 2019 18:53:38 +0300
-Subject: [PATCH] arc add OWRTDTB section
-
-This change allows OpenWRT to patch resulting kernel binary with
-external .dtb.
-
-That allows us to re-use exactky the same vmlinux on different boards
-given its ARC core configurations match (at least cache line sizes etc).
-
-""patch-dtb" searches for ASCII "OWRTDTB:" strign and copies external
-.dtb right after it, keeping the string in place.
-
-Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
-Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
-Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
----
- arch/arc/kernel/head.S        | 10 ++++++++++
- arch/arc/kernel/setup.c       |  4 +++-
- arch/arc/kernel/vmlinux.lds.S | 13 +++++++++++++
- 3 files changed, 26 insertions(+), 1 deletion(-)
-
---- a/arch/arc/kernel/head.S
-+++ b/arch/arc/kernel/head.S
-@@ -61,6 +61,16 @@
- #endif
- .endm
- 
-+	; Here "patch-dtb" will embed external .dtb
-+	; Note "patch-dtb" searches for ASCII "OWRTDTB:" string
-+	; and pastes .dtb right after it, hense the string precedes
-+	; __image_dtb symbol.
-+	.section .owrt, "aw",@progbits
-+	.ascii  "OWRTDTB:"
-+ENTRY(__image_dtb)
-+	.fill   0x4000
-+END(__image_dtb)
-+
- 	.section .init.text, "ax",@progbits
- 
- ;----------------------------------------------------------------
---- a/arch/arc/kernel/setup.c
-+++ b/arch/arc/kernel/setup.c
-@@ -492,6 +492,8 @@ static inline bool uboot_arg_invalid(uns
- /* We always pass 0 as magic from U-boot */
- #define UBOOT_MAGIC_VALUE	0
- 
-+extern struct boot_param_header __image_dtb;
-+
- void __init handle_uboot_args(void)
- {
- 	bool use_embedded_dtb = true;
-@@ -530,7 +532,7 @@ void __init handle_uboot_args(void)
- ignore_uboot_args:
- 
- 	if (use_embedded_dtb) {
--		machine_desc = setup_machine_fdt(__dtb_start);
-+		machine_desc = setup_machine_fdt(&__image_dtb);
- 		if (!machine_desc)
- 			panic("Embedded DT invalid\n");
- 	}
---- a/arch/arc/kernel/vmlinux.lds.S
-+++ b/arch/arc/kernel/vmlinux.lds.S
-@@ -27,6 +27,19 @@ SECTIONS
- 
- 	. = CONFIG_LINUX_LINK_BASE;
- 
-+	/*
-+	* In OpenWRT we want to patch built binary embedding .dtb of choice.
-+	* This is implemented with "patch-dtb" utility which searches for
-+	* "OWRTDTB:" string in first 16k of image and if it is found
-+	* copies .dtb right after mentioned string.
-+	*
-+	* Note: "OWRTDTB:" won't be overwritten with .dtb, .dtb will follow it.
-+	*/
-+ 	.owrt : {
-+		*(.owrt)
-+	. = ALIGN(PAGE_SIZE);
-+	}
-+
- 	_int_vec_base_lds = .;
- 	.vector : {
- 		*(.vector)
diff --git a/target/linux/generic/pending-5.4/333-arc-enable-unaligned-access-in-kernel-mode.patch b/target/linux/generic/pending-5.4/333-arc-enable-unaligned-access-in-kernel-mode.patch
deleted file mode 100644
index 1848a84cc4..0000000000
--- a/target/linux/generic/pending-5.4/333-arc-enable-unaligned-access-in-kernel-mode.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Alexey Brodkin <abrodkin@synopsys.com>
-Subject: arc: enable unaligned access in kernel mode
-
-This enables misaligned access handling even in kernel mode.
-Some wireless drivers (ath9k-htc and mt7601u) use misaligned accesses
-here and there and to cope with that without fixing stuff in the drivers
-we're just gracefully handling it on ARC.
-
-Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
----
- arch/arc/kernel/unaligned.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arc/kernel/unaligned.c
-+++ b/arch/arc/kernel/unaligned.c
-@@ -202,7 +202,7 @@ int misaligned_fixup(unsigned long addre
- 	char buf[TASK_COMM_LEN];
- 
- 	/* handle user mode only and only if enabled by sysadmin */
--	if (!user_mode(regs) || !unaligned_enabled)
-+	if (!unaligned_enabled)
- 		return 1;
- 
- 	if (no_unaligned_warning) {
diff --git a/target/linux/generic/pending-5.4/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch b/target/linux/generic/pending-5.4/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch
deleted file mode 100644
index 8d4c74219f..0000000000
--- a/target/linux/generic/pending-5.4/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 66770a004afe10df11d3902e16eaa0c2c39436bb Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Fri, 24 May 2019 17:56:19 +0200
-Subject: [PATCH] powerpc: Enable kernel XZ compression option on PPC_85xx
-
-Enable kernel XZ compression option on PPC_85xx. Tested with
-simpleImage on TP-Link TL-WDR4900 (Freescale P1014 processor).
-
-Suggested-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/powerpc/Kconfig
-+++ b/arch/powerpc/Kconfig
-@@ -205,7 +205,7 @@ config PPC
- 	select HAVE_KERNEL_GZIP
- 	select HAVE_KERNEL_LZMA			if DEFAULT_UIMAGE
- 	select HAVE_KERNEL_LZO			if DEFAULT_UIMAGE
--	select HAVE_KERNEL_XZ			if PPC_BOOK3S || 44x
-+	select HAVE_KERNEL_XZ			if PPC_BOOK3S || 44x || PPC_85xx
- 	select HAVE_KPROBES
- 	select HAVE_KPROBES_ON_FTRACE
- 	select HAVE_KRETPROBES
diff --git a/target/linux/generic/pending-5.4/400-mtd-add-rootfs-split-support.patch b/target/linux/generic/pending-5.4/400-mtd-add-rootfs-split-support.patch
deleted file mode 100644
index 83a4ed39a3..0000000000
--- a/target/linux/generic/pending-5.4/400-mtd-add-rootfs-split-support.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: make rootfs split/detection more generic - patch can be moved to generic-2.6 after testing on other platforms
-
-lede-commit: 328e660b31f0937d52c5ae3d6e7029409918a9df
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/Kconfig            | 17 +++++++++++++++++
- drivers/mtd/mtdpart.c          | 35 +++++++++++++++++++++++++++++++++++
- include/linux/mtd/partitions.h |  2 ++
- 3 files changed, 54 insertions(+)
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -12,6 +12,23 @@ menuconfig MTD
- 
- if MTD
- 
-+menu "OpenWrt specific MTD options"
-+
-+config MTD_ROOTFS_ROOT_DEV
-+	bool "Automatically set 'rootfs' partition to be root filesystem"
-+	default y
-+
-+config MTD_SPLIT_FIRMWARE
-+	bool "Automatically split firmware partition for kernel+rootfs"
-+	default y
-+
-+config MTD_SPLIT_FIRMWARE_NAME
-+	string "Firmware partition name"
-+	depends on MTD_SPLIT_FIRMWARE
-+	default "firmware"
-+
-+endmenu
-+
- config MTD_TESTS
- 	tristate "MTD tests support (DANGEROUS)"
- 	depends on m
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -15,10 +15,12 @@
- #include <linux/kmod.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/magic.h>
- #include <linux/err.h>
- #include <linux/of.h>
- 
- #include "mtdcore.h"
-+#include "mtdsplit/mtdsplit.h"
- 
- /* Our partition linked list */
- static LIST_HEAD(mtd_partitions);
-@@ -38,6 +40,8 @@ struct mtd_part {
- 	struct list_head list;
- };
- 
-+static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
-+
- /*
-  * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
-  * the pointer to that structure.
-@@ -612,6 +616,7 @@ int mtd_add_partition(struct mtd_info *p
- 	if (ret)
- 		goto err_remove_part;
- 
-+	mtd_partition_split(parent, new);
- 	mtd_add_partition_attrs(new);
- 
- 	return 0;
-@@ -698,6 +703,29 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
- 
-+#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
-+#define SPLIT_FIRMWARE_NAME	CONFIG_MTD_SPLIT_FIRMWARE_NAME
-+#else
-+#define SPLIT_FIRMWARE_NAME	"unused"
-+#endif
-+
-+static void split_firmware(struct mtd_info *master, struct mtd_part *part)
-+{
-+}
-+
-+static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
-+{
-+	static int rootfs_found = 0;
-+
-+	if (rootfs_found)
-+		return;
-+
-+	if (IS_ENABLED(CONFIG_MTD_SPLIT_FIRMWARE) &&
-+	    !strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
-+	    !of_find_property(mtd_get_of_node(&part->mtd), "compatible", NULL))
-+		split_firmware(master, part);
-+}
-+
- /*
-  * This function, given a master MTD object and a partition table, creates
-  * and registers slave MTD objects which are bound to the master according to
-@@ -738,6 +766,7 @@ int add_mtd_partitions(struct mtd_info *
- 			goto err_del_partitions;
- 		}
- 
-+		mtd_partition_split(master, slave);
- 		mtd_add_partition_attrs(slave);
- 		/* Look for subpartitions */
- 		parse_mtd_partitions(&slave->mtd, parts[i].types, NULL);
diff --git a/target/linux/generic/pending-5.4/401-mtd-add-support-for-different-partition-parser-types.patch b/target/linux/generic/pending-5.4/401-mtd-add-support-for-different-partition-parser-types.patch
deleted file mode 100644
index f471c62376..0000000000
--- a/target/linux/generic/pending-5.4/401-mtd-add-support-for-different-partition-parser-types.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: mtd: add support for different partition parser types
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdpart.c          |   56 ++++++++++++++++++++++++++++++++++++++++
- include/linux/mtd/partitions.h |   11 ++++++++
- 2 files changed, 67 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -41,6 +41,10 @@ struct mtd_part {
- };
- 
- static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
-+static int parse_mtd_partitions_by_type(struct mtd_info *master,
-+					enum mtd_parser_type type,
-+					const struct mtd_partition **pparts,
-+					struct mtd_part_parser_data *data);
- 
- /*
-  * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
-@@ -703,6 +707,36 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
- 
-+static int
-+run_parsers_by_type(struct mtd_part *slave, enum mtd_parser_type type)
-+{
-+	struct mtd_partition *parts;
-+	int nr_parts;
-+	int i;
-+
-+	nr_parts = parse_mtd_partitions_by_type(&slave->mtd, type, (const struct mtd_partition **)&parts,
-+						NULL);
-+	if (nr_parts <= 0)
-+		return nr_parts;
-+
-+	if (WARN_ON(!parts))
-+		return 0;
-+
-+	for (i = 0; i < nr_parts; i++) {
-+		/* adjust partition offsets */
-+		parts[i].offset += slave->offset;
-+
-+		mtd_add_partition(slave->parent,
-+				  parts[i].name,
-+				  parts[i].offset,
-+				  parts[i].size);
-+	}
-+
-+	kfree(parts);
-+
-+	return nr_parts;
-+}
-+
- #ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
- #define SPLIT_FIRMWARE_NAME	CONFIG_MTD_SPLIT_FIRMWARE_NAME
- #else
-@@ -1052,6 +1086,61 @@ void mtd_part_parser_cleanup(struct mtd_
- 	}
- }
- 
-+static struct mtd_part_parser *
-+get_partition_parser_by_type(enum mtd_parser_type type,
-+			     struct mtd_part_parser *start)
-+{
-+	struct mtd_part_parser *p, *ret = NULL;
-+
-+	spin_lock(&part_parser_lock);
-+
-+	p = list_prepare_entry(start, &part_parsers, list);
-+	if (start)
-+		mtd_part_parser_put(start);
-+
-+	list_for_each_entry_continue(p, &part_parsers, list) {
-+		if (p->type == type && try_module_get(p->owner)) {
-+			ret = p;
-+			break;
-+		}
-+	}
-+
-+	spin_unlock(&part_parser_lock);
-+
-+	return ret;
-+}
-+
-+static int parse_mtd_partitions_by_type(struct mtd_info *master,
-+					enum mtd_parser_type type,
-+					const struct mtd_partition **pparts,
-+					struct mtd_part_parser_data *data)
-+{
-+	struct mtd_part_parser *prev = NULL;
-+	int ret = 0;
-+
-+	while (1) {
-+		struct mtd_part_parser *parser;
-+
-+		parser = get_partition_parser_by_type(type, prev);
-+		if (!parser)
-+			break;
-+
-+		ret = (*parser->parse_fn)(master, pparts, data);
-+
-+		if (ret > 0) {
-+			mtd_part_parser_put(parser);
-+			printk(KERN_NOTICE
-+			       "%d %s partitions found on MTD device %s\n",
-+			       ret, parser->name, master->name);
-+			break;
-+		}
-+
-+		prev = parser;
-+	}
-+
-+	return ret;
-+}
-+
- int mtd_is_partition(const struct mtd_info *mtd)
- {
- 	struct mtd_part *part;
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -73,6 +73,10 @@ struct mtd_part_parser_data {
-  * Functions dealing with the various ways of partitioning the space
-  */
- 
-+enum mtd_parser_type {
-+	MTD_PARSER_TYPE_DEVICE = 0,
-+};
-+
- struct mtd_part_parser {
- 	struct list_head list;
- 	struct module *owner;
-@@ -81,6 +85,7 @@ struct mtd_part_parser {
- 	int (*parse_fn)(struct mtd_info *, const struct mtd_partition **,
- 			struct mtd_part_parser_data *);
- 	void (*cleanup)(const struct mtd_partition *pparts, int nr_parts);
-+	enum mtd_parser_type type;
- };
- 
- /* Container for passing around a set of parsed partitions */
diff --git a/target/linux/generic/pending-5.4/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch b/target/linux/generic/pending-5.4/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch
deleted file mode 100644
index afe3ec7756..0000000000
--- a/target/linux/generic/pending-5.4/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: kernel/3.10: allow to use partition parsers for rootfs and firmware split
-
-lede-commit: 3b71cd94bc9517bc25267dccb393b07d4b54564e
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdpart.c          | 37 +++++++++++++++++++++++++++++++++++++
- include/linux/mtd/partitions.h |  2 ++
- 2 files changed, 39 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -745,6 +745,7 @@ run_parsers_by_type(struct mtd_part *sla
- 
- static void split_firmware(struct mtd_info *master, struct mtd_part *part)
- {
-+	run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
- }
- 
- static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
-@@ -754,6 +755,12 @@ static void mtd_partition_split(struct m
- 	if (rootfs_found)
- 		return;
- 
-+	if (!strcmp(part->mtd.name, "rootfs")) {
-+		run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
-+
-+		rootfs_found = 1;
-+	}
-+
- 	if (IS_ENABLED(CONFIG_MTD_SPLIT_FIRMWARE) &&
- 	    !strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
- 	    !of_find_property(mtd_get_of_node(&part->mtd), "compatible", NULL))
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -75,6 +75,8 @@ struct mtd_part_parser_data {
- 
- enum mtd_parser_type {
- 	MTD_PARSER_TYPE_DEVICE = 0,
-+	MTD_PARSER_TYPE_ROOTFS,
-+	MTD_PARSER_TYPE_FIRMWARE,
- };
- 
- struct mtd_part_parser {
diff --git a/target/linux/generic/pending-5.4/403-mtd-hook-mtdsplit-to-Kbuild.patch b/target/linux/generic/pending-5.4/403-mtd-hook-mtdsplit-to-Kbuild.patch
deleted file mode 100644
index 5d868fffa8..0000000000
--- a/target/linux/generic/pending-5.4/403-mtd-hook-mtdsplit-to-Kbuild.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: [PATCH] kernel/3.10: move squashfs check from rootfs split code into a separate file
-
-lede-commit: d89bea92b31b4e157a0fa438e75370f089f73427
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/Kconfig  | 2 ++
- drivers/mtd/Makefile | 2 ++
- 2 files changed, 4 insertions(+)
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -27,6 +27,8 @@ config MTD_SPLIT_FIRMWARE_NAME
- 	depends on MTD_SPLIT_FIRMWARE
- 	default "firmware"
- 
-+source "drivers/mtd/mtdsplit/Kconfig"
-+
- endmenu
- 
- config MTD_TESTS
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -9,6 +9,8 @@ mtd-y				:= mtdcore.o mtdsuper.o mtdconc
- 
- obj-y				+= parsers/
- 
-+obj-$(CONFIG_MTD_SPLIT)		+= mtdsplit/
-+
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS)	+= mtd_blkdevs.o
- obj-$(CONFIG_MTD_BLOCK)		+= mtdblock.o
diff --git a/target/linux/generic/pending-5.4/404-mtd-add-more-helper-functions.patch b/target/linux/generic/pending-5.4/404-mtd-add-more-helper-functions.patch
deleted file mode 100644
index 059a440f0a..0000000000
--- a/target/linux/generic/pending-5.4/404-mtd-add-more-helper-functions.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: kernel/3.10: add separate rootfs partition parser
-
-lede-commit: daec7ad7688415156e2730e401503d09bd3acf91
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdpart.c          | 29 +++++++++++++++++++++++++++++
- include/linux/mtd/mtd.h        | 18 ++++++++++++++++++
- include/linux/mtd/partitions.h |  2 ++
- 3 files changed, 49 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -1165,6 +1165,24 @@ int mtd_is_partition(const struct mtd_in
- }
- EXPORT_SYMBOL_GPL(mtd_is_partition);
- 
-+struct mtd_info *mtd_get_master(const struct mtd_info *mtd)
-+{
-+	if (!mtd_is_partition(mtd))
-+		return (struct mtd_info *)mtd;
-+
-+	return mtd_to_part(mtd)->parent;
-+}
-+EXPORT_SYMBOL_GPL(mtd_get_master);
-+
-+uint64_t mtdpart_get_offset(const struct mtd_info *mtd)
-+{
-+	if (!mtd_is_partition(mtd))
-+		return 0;
-+
-+	return mtd_to_part(mtd)->offset;
-+}
-+EXPORT_SYMBOL_GPL(mtdpart_get_offset);
-+
- /* Returns the size of the entire flash chip */
- uint64_t mtd_get_device_size(const struct mtd_info *mtd)
- {
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -504,6 +504,24 @@ static inline void mtd_align_erase_req(s
- 		req->len += mtd->erasesize - mod;
- }
- 
-+static inline uint64_t mtd_roundup_to_eb(uint64_t sz, struct mtd_info *mtd)
-+{
-+	if (mtd_mod_by_eb(sz, mtd) == 0)
-+		return sz;
-+
-+	/* Round up to next erase block */
-+	return (mtd_div_by_eb(sz, mtd) + 1) * mtd->erasesize;
-+}
-+
-+static inline uint64_t mtd_rounddown_to_eb(uint64_t sz, struct mtd_info *mtd)
-+{
-+	if (mtd_mod_by_eb(sz, mtd) == 0)
-+		return sz;
-+
-+	/* Round down to the start of the current erase block */
-+	return (mtd_div_by_eb(sz, mtd)) * mtd->erasesize;
-+}
-+
- static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
- {
- 	if (mtd->writesize_shift)
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -116,6 +116,8 @@ int mtd_is_partition(const struct mtd_in
- int mtd_add_partition(struct mtd_info *master, const char *name,
- 		      long long offset, long long length);
- int mtd_del_partition(struct mtd_info *master, int partno);
-+struct mtd_info *mtd_get_master(const struct mtd_info *mtd);
-+uint64_t mtdpart_get_offset(const struct mtd_info *mtd);
- uint64_t mtd_get_device_size(const struct mtd_info *mtd);
- 
- #endif
diff --git a/target/linux/generic/pending-5.4/410-mtd-parsers-ofpart-fix-parsing-subpartitions.patch b/target/linux/generic/pending-5.4/410-mtd-parsers-ofpart-fix-parsing-subpartitions.patch
deleted file mode 100644
index d0fc1d50e2..0000000000
--- a/target/linux/generic/pending-5.4/410-mtd-parsers-ofpart-fix-parsing-subpartitions.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 6 May 2021 12:33:58 +0200
-Subject: [PATCH] mtd: parsers: ofpart: fix parsing subpartitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-ofpart was recently patched to not scan random partition nodes as
-subpartitions. That change unfortunately broke scanning valid
-subpartitions like:
-
-partitions {
-	compatible = "fixed-partitions";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	partition@0 {
-		compatible = "fixed-partitions";
-		label = "bootloader";
-		reg = <0x0 0x100000>;
-
-		partition@0 {
-			label = "config";
-			reg = <0x80000 0x80000>;
-		};
-	};
-};
-
-Fix that regression by adding 1 more code path. We actually need 3
-conditional blocks to support 3 possible cases. This change also makes
-code easier to understand & follow.
-
-Reported-by: David Bauer <mail@david-bauer.net>
-Fixes: 2d751203aacf ("mtd: parsers: ofpart: limit parsing of deprecated DT syntax
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/mtd/parsers/ofpart_core.c | 26 ++++++++++++++------------
- 1 file changed, 14 insertions(+), 12 deletions(-)
-
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -57,20 +57,22 @@ static int parse_fixed_partitions(struct
- 	if (!mtd_node)
- 		return 0;
- 
--	ofpart_node = of_get_child_by_name(mtd_node, "partitions");
--	if (!ofpart_node && !mtd_is_partition(master)) {
--		/*
--		 * We might get here even when ofpart isn't used at all (e.g.,
--		 * when using another parser), so don't be louder than
--		 * KERN_DEBUG
--		 */
--		pr_debug("%s: 'partitions' subnode not found on %pOF. Trying to parse direct subnodes as partitions.\n",
--			 master->name, mtd_node);
-+	if (!mtd_is_partition(master)) { /* Master */
-+		ofpart_node = of_get_child_by_name(mtd_node, "partitions");
-+		if (!ofpart_node) {
-+			/*
-+			 * We might get here even when ofpart isn't used at all (e.g.,
-+			 * when using another parser), so don't be louder than
-+			 * KERN_DEBUG
-+			 */
-+			pr_debug("%s: 'partitions' subnode not found on %pOF. Trying to parse direct subnodes as partitions.\n",
-+				master->name, mtd_node);
-+			ofpart_node = mtd_node;
-+			dedicated = false;
-+		}
-+	} else { /* Partition */
- 		ofpart_node = mtd_node;
--		dedicated = false;
- 	}
--	if (!ofpart_node)
--		return 0;
- 
- 	of_id = of_match_node(parse_ofpart_match_table, ofpart_node);
- 	if (dedicated && !of_id) {
diff --git a/target/linux/generic/pending-5.4/411-mtd-partial_eraseblock_write.patch b/target/linux/generic/pending-5.4/411-mtd-partial_eraseblock_write.patch
deleted file mode 100644
index c48a144d3d..0000000000
--- a/target/linux/generic/pending-5.4/411-mtd-partial_eraseblock_write.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mtd: implement write support for partitions covering only a part of an eraseblock (buffer data that would otherwise be erased)
-
-lede-commit: 87a8e8ac1067f58ba831c4aae443f3655c31cd80
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/mtdpart.c   | 90 ++++++++++++++++++++++++++++++++++++++++++++-----
- include/linux/mtd/mtd.h |  4 +++
- 2 files changed, 85 insertions(+), 9 deletions(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -22,6 +22,8 @@
- #include "mtdcore.h"
- #include "mtdsplit/mtdsplit.h"
- 
-+#define MTD_ERASE_PARTIAL	0x8000 /* partition only covers parts of an erase block */
-+
- /* Our partition linked list */
- static LIST_HEAD(mtd_partitions);
- static DEFINE_MUTEX(mtd_partitions_mutex);
-@@ -206,11 +208,77 @@ static int part_erase(struct mtd_info *m
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
- 	int ret;
-+	size_t wrlen = 0;
-+	u8 *erase_buf = NULL;
-+	u32 erase_buf_ofs = 0;
-+	bool partial_start = false;
-+
-+	if (mtd->flags & MTD_ERASE_PARTIAL) {
-+		size_t readlen = 0;
-+		u64 mtd_ofs;
-+
-+		erase_buf = kmalloc(part->parent->erasesize, GFP_ATOMIC);
-+		if (!erase_buf)
-+			return -ENOMEM;
-+
-+		mtd_ofs = part->offset + instr->addr;
-+		erase_buf_ofs = do_div(mtd_ofs, part->parent->erasesize);
-+
-+		if (erase_buf_ofs > 0) {
-+			instr->addr -= erase_buf_ofs;
-+			ret = mtd_read(part->parent,
-+				instr->addr + part->offset,
-+				part->parent->erasesize,
-+				&readlen, erase_buf);
-+
-+			instr->len += erase_buf_ofs;
-+			partial_start = true;
-+		} else {
-+			mtd_ofs = part->offset + part->mtd.size;
-+			erase_buf_ofs = part->parent->erasesize -
-+				do_div(mtd_ofs, part->parent->erasesize);
-+
-+			if (erase_buf_ofs > 0) {
-+				instr->len += erase_buf_ofs;
-+				ret = mtd_read(part->parent,
-+					part->offset + instr->addr +
-+					instr->len - part->parent->erasesize,
-+					part->parent->erasesize, &readlen,
-+					erase_buf);
-+			} else {
-+				ret = 0;
-+			}
-+		}
-+		if (ret < 0) {
-+			kfree(erase_buf);
-+			return ret;
-+		}
-+
-+	}
- 
- 	instr->addr += part->offset;
- 	ret = part->parent->_erase(part->parent, instr);
- 	if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
- 		instr->fail_addr -= part->offset;
-+
-+	if (mtd->flags & MTD_ERASE_PARTIAL) {
-+		if (partial_start) {
-+			part->parent->_write(part->parent,
-+				instr->addr, erase_buf_ofs,
-+				&wrlen, erase_buf);
-+			instr->addr += erase_buf_ofs;
-+		} else {
-+			instr->len -= erase_buf_ofs;
-+			part->parent->_write(part->parent,
-+				instr->addr + instr->len,
-+				erase_buf_ofs, &wrlen,
-+				erase_buf +
-+				part->parent->erasesize -
-+				erase_buf_ofs);
-+		}
-+		kfree(erase_buf);
-+	}
-+
- 	instr->addr -= part->offset;
- 
- 	return ret;
-@@ -525,19 +593,22 @@ static struct mtd_part *allocate_partiti
- 	remainder = do_div(tmp, wr_alignment);
- 	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
- 		/* Doesn't start on a boundary of major erase size */
--		/* FIXME: Let it be writable if it is on a boundary of
--		 * _minor_ erase size though */
--		slave->mtd.flags &= ~MTD_WRITEABLE;
--		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
--			part->name);
-+		slave->mtd.flags |= MTD_ERASE_PARTIAL;
-+		if (((u32)slave->mtd.size) > parent->erasesize)
-+			slave->mtd.flags &= ~MTD_WRITEABLE;
-+		else
-+			slave->mtd.erasesize = slave->mtd.size;
- 	}
- 
- 	tmp = part_absolute_offset(parent) + slave->offset + slave->mtd.size;
- 	remainder = do_div(tmp, wr_alignment);
- 	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
--		slave->mtd.flags &= ~MTD_WRITEABLE;
--		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
--			part->name);
-+		slave->mtd.flags |= MTD_ERASE_PARTIAL;
-+
-+		if ((u32)slave->mtd.size > parent->erasesize)
-+			slave->mtd.flags &= ~MTD_WRITEABLE;
-+		else
-+			slave->mtd.erasesize = slave->mtd.size;
- 	}
- 
- 	mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops);
diff --git a/target/linux/generic/pending-5.4/412-mtd-partial_eraseblock_unlock.patch b/target/linux/generic/pending-5.4/412-mtd-partial_eraseblock_unlock.patch
deleted file mode 100644
index b23bc1b201..0000000000
--- a/target/linux/generic/pending-5.4/412-mtd-partial_eraseblock_unlock.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From: Tim Harvey <tharvey@gateworks.com>
-Subject: mtd: allow partial block unlock
-
-This allows sysupgrade for devices such as the Gateworks Avila/Cambria
-product families based on the ixp4xx using the redboot bootloader with
-combined FIS directory and RedBoot config partitions on larger FLASH
-devices with larger eraseblocks.
-
-This second iteration of this patch addresses previous issues:
-- whitespace breakage fixed
-- unlock in all scenarios
-- simplification and fix logic bug
-
-[john@phrozen.org: this should be moved to the ixp4xx folder]
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/mtd/mtdpart.c | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -293,7 +293,16 @@ static int part_lock(struct mtd_info *mt
- static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->parent->_unlock(part->parent, ofs + part->offset, len);
-+
-+	ofs += part->offset;
-+
-+	if (mtd->flags & MTD_ERASE_PARTIAL) {
-+		/* round up len to next erasesize and round down offset to prev block */
-+		len = (mtd_div_by_eb(len, part->parent) + 1) * part->parent->erasesize;
-+		ofs &= ~(part->parent->erasesize - 1);
-+	}
-+
-+	return part->parent->_unlock(part->parent, ofs, len);
- }
- 
- static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
diff --git a/target/linux/generic/pending-5.4/419-mtd-redboot-add-of_match_table-with-DT-binding.patch b/target/linux/generic/pending-5.4/419-mtd-redboot-add-of_match_table-with-DT-binding.patch
deleted file mode 100644
index 7692f484ae..0000000000
--- a/target/linux/generic/pending-5.4/419-mtd-redboot-add-of_match_table-with-DT-binding.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] mtd: redboot: add of_match_table with DT binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows parsing RedBoot compatible partitions for properly described
-flash device in DT.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/mtd/parsers/redboot.c
-+++ b/drivers/mtd/parsers/redboot.c
-@@ -305,6 +305,7 @@ static int parse_redboot_partitions(stru
- 
- static const struct of_device_id mtd_parser_redboot_of_match_table[] = {
- 	{ .compatible = "redboot-fis" },
-+	{ .compatible = "ecoscentric,redboot-fis-partitions" },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, mtd_parser_redboot_of_match_table);
diff --git a/target/linux/generic/pending-5.4/420-mtd-redboot_space.patch b/target/linux/generic/pending-5.4/420-mtd-redboot_space.patch
deleted file mode 100644
index a3cd4ecf1f..0000000000
--- a/target/linux/generic/pending-5.4/420-mtd-redboot_space.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: add patch for including unpartitioned space in the rootfs partition for redboot devices (if applicable)
-
-[john@phrozen.org: used by ixp and others]
-
-lede-commit: 394918851f84e4d00fa16eb900e7700e95091f00
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/redboot.c | 19 +++++++++++++------
- 1 file changed, 13 insertions(+), 6 deletions(-)
-
---- a/drivers/mtd/parsers/redboot.c
-+++ b/drivers/mtd/parsers/redboot.c
-@@ -279,14 +279,21 @@ static int parse_redboot_partitions(stru
- #endif
- 		names += strlen(names)+1;
- 
--#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- 		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
--			i++;
--			parts[i].offset = parts[i-1].size + parts[i-1].offset;
--			parts[i].size = fl->next->img->flash_base - parts[i].offset;
--			parts[i].name = nullname;
--		}
-+			if (!strcmp(parts[i].name, "rootfs")) {
-+				parts[i].size = fl->next->img->flash_base;
-+				parts[i].size &= ~(master->erasesize - 1);
-+				parts[i].size -= parts[i].offset;
-+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
-+				nrparts--;
-+			} else {
-+				i++;
-+				parts[i].offset = parts[i-1].size + parts[i-1].offset;
-+				parts[i].size = fl->next->img->flash_base - parts[i].offset;
-+				parts[i].name = nullname;
- #endif
-+			}
-+		}
- 		tmp_fl = fl;
- 		fl = fl->next;
- 		kfree(tmp_fl);
diff --git a/target/linux/generic/pending-5.4/430-mtd-add-myloader-partition-parser.patch b/target/linux/generic/pending-5.4/430-mtd-add-myloader-partition-parser.patch
deleted file mode 100644
index 3319ed94c2..0000000000
--- a/target/linux/generic/pending-5.4/430-mtd-add-myloader-partition-parser.patch
+++ /dev/null
@@ -1,229 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Subject: Add myloader partition table parser
-
-[john@phozen.org: shoud be upstreamable]
-
-lede-commit: d8bf22859b51faa09d22c056fe221a45d2f7a3b8
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-[adjust for kernel 5.4, add myloader.c to patch]
-Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -57,6 +57,22 @@ config MTD_CMDLINE_PARTS
- 
- 	  If unsure, say 'N'.
- 
-+config MTD_MYLOADER_PARTS
-+	tristate "MyLoader partition parsing"
-+	depends on ADM5120 || ATH25 || ATH79
-+	---help---
-+	  MyLoader is a bootloader which allows the user to define partitions
-+	  in flash devices, by putting a table in the second erase block
-+	  on the device, similar to a partition table. This table gives the 
-+	  offsets and lengths of the user defined partitions.
-+
-+	  If you need code which can detect and parse these tables, and
-+	  register MTD 'partitions' corresponding to each image detected,
-+	  enable this option.
-+
-+	  You will still need the parsing functions to be called by the driver
-+	  for your particular device. It won't happen automatically.
-+
- config MTD_OF_PARTS
- 	tristate "OpenFirmware (device tree) partitioning parser"
- 	default y
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -3,6 +3,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)		+= ar7part.
- obj-$(CONFIG_MTD_BCM47XX_PARTS)		+= bcm47xxpart.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS)		+= bcm63xxpart.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS)		+= cmdlinepart.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS)		+= myloader.o
- obj-$(CONFIG_MTD_OF_PARTS)		+= ofpart.o
- ofpart-y				+= ofpart_core.o
- ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908)	+= ofpart_bcm4908.o
---- /dev/null
-+++ b/drivers/mtd/parsers/myloader.c
-@@ -0,0 +1,181 @@
-+/*
-+ *  Parse MyLoader-style flash partition tables and produce a Linux partition
-+ *  array to match.
-+ *
-+ *  Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This file was based on drivers/mtd/redboot.c
-+ *  Author: Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/vmalloc.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/byteorder/generic.h>
-+#include <linux/myloader.h>
-+
-+#define BLOCK_LEN_MIN		0x10000
-+#define PART_NAME_LEN		32
-+
-+struct part_data {
-+	struct mylo_partition_table	tab;
-+	char names[MYLO_MAX_PARTITIONS][PART_NAME_LEN];
-+};
-+
-+static int myloader_parse_partitions(struct mtd_info *master,
-+				     const struct mtd_partition **pparts,
-+				     struct mtd_part_parser_data *data)
-+{
-+	struct part_data *buf;
-+	struct mylo_partition_table *tab;
-+	struct mylo_partition *part;
-+	struct mtd_partition *mtd_parts;
-+	struct mtd_partition *mtd_part;
-+	int num_parts;
-+	int ret, i;
-+	size_t retlen;
-+	char *names;
-+	unsigned long offset;
-+	unsigned long blocklen;
-+
-+	buf = vmalloc(sizeof(*buf));
-+	if (!buf) {
-+		return -ENOMEM;
-+		goto out;
-+	}
-+	tab = &buf->tab;
-+
-+	blocklen = master->erasesize;
-+	if (blocklen < BLOCK_LEN_MIN)
-+		blocklen = BLOCK_LEN_MIN;
-+
-+	offset = blocklen;
-+
-+	/* Find the partition table */
-+	for (i = 0; i < 4; i++, offset += blocklen) {
-+		printk(KERN_DEBUG "%s: searching for MyLoader partition table"
-+				" at offset 0x%lx\n", master->name, offset);
-+
-+		ret = mtd_read(master, offset, sizeof(*buf), &retlen,
-+			       (void *)buf);
-+		if (ret)
-+			goto out_free_buf;
-+
-+		if (retlen != sizeof(*buf)) {
-+			ret = -EIO;
-+			goto out_free_buf;
-+		}
-+
-+		/* Check for Partition Table magic number */
-+		if (tab->magic == le32_to_cpu(MYLO_MAGIC_PARTITIONS))
-+			break;
-+
-+	}
-+
-+	if (tab->magic != le32_to_cpu(MYLO_MAGIC_PARTITIONS)) {
-+		printk(KERN_DEBUG "%s: no MyLoader partition table found\n",
-+			master->name);
-+		ret = 0;
-+		goto out_free_buf;
-+	}
-+
-+	/* The MyLoader and the Partition Table is always present */
-+	num_parts = 2;
-+
-+	/* Detect number of used partitions */
-+	for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
-+		part = &tab->partitions[i];
-+
-+		if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
-+			continue;
-+
-+		num_parts++;
-+	}
-+
-+	mtd_parts = kzalloc((num_parts * sizeof(*mtd_part) +
-+				num_parts * PART_NAME_LEN), GFP_KERNEL);
-+
-+	if (!mtd_parts) {
-+		ret = -ENOMEM;
-+		goto out_free_buf;
-+	}
-+
-+	mtd_part = mtd_parts;
-+	names = (char *)&mtd_parts[num_parts];
-+
-+	strncpy(names, "myloader", PART_NAME_LEN);
-+	mtd_part->name = names;
-+	mtd_part->offset = 0;
-+	mtd_part->size = offset;
-+	mtd_part->mask_flags = MTD_WRITEABLE;
-+	mtd_part++;
-+	names += PART_NAME_LEN;
-+
-+	strncpy(names, "partition_table", PART_NAME_LEN);
-+	mtd_part->name = names;
-+	mtd_part->offset = offset;
-+	mtd_part->size = blocklen;
-+	mtd_part->mask_flags = MTD_WRITEABLE;
-+	mtd_part++;
-+	names += PART_NAME_LEN;
-+
-+	for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
-+		part = &tab->partitions[i];
-+
-+		if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
-+			continue;
-+
-+		if ((buf->names[i][0]) && (buf->names[i][0] != '\xff'))
-+			strncpy(names, buf->names[i], PART_NAME_LEN);
-+		else
-+			snprintf(names, PART_NAME_LEN, "partition%d", i);
-+
-+		mtd_part->offset = le32_to_cpu(part->addr);
-+		mtd_part->size = le32_to_cpu(part->size);
-+		mtd_part->name = names;
-+		mtd_part++;
-+		names += PART_NAME_LEN;
-+	}
-+
-+	*pparts = mtd_parts;
-+	ret = num_parts;
-+
-+ out_free_buf:
-+	vfree(buf);
-+ out:
-+	return ret;
-+}
-+
-+static struct mtd_part_parser myloader_mtd_parser = {
-+	.owner		= THIS_MODULE,
-+	.parse_fn	= myloader_parse_partitions,
-+	.name		= "MyLoader",
-+};
-+
-+static int __init myloader_mtd_parser_init(void)
-+{
-+	register_mtd_parser(&myloader_mtd_parser);
-+
-+	return 0;
-+}
-+
-+static void __exit myloader_mtd_parser_exit(void)
-+{
-+	deregister_mtd_parser(&myloader_mtd_parser);
-+}
-+
-+module_init(myloader_mtd_parser_init);
-+module_exit(myloader_mtd_parser_exit);
-+
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-+MODULE_DESCRIPTION("Parsing code for MyLoader partition tables");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/pending-5.4/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch b/target/linux/generic/pending-5.4/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
deleted file mode 100644
index 2ea59cd872..0000000000
--- a/target/linux/generic/pending-5.4/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] mtd: bcm47xxpart: check for bad blocks when calculating offsets
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/drivers/mtd/parsers/parser_trx.c
-+++ b/drivers/mtd/parsers/parser_trx.c
-@@ -25,6 +25,33 @@ struct trx_header {
- 	uint32_t offset[3];
- } __packed;
- 
-+/*
-+ * Calculate real end offset (address) for a given amount of data. It checks
-+ * all blocks skipping bad ones.
-+ */
-+static size_t parser_trx_real_offset(struct mtd_info *mtd, size_t bytes)
-+{
-+	size_t real_offset = 0;
-+
-+	if (mtd_block_isbad(mtd, real_offset))
-+		pr_warn("Base offset shouldn't be at bad block");
-+
-+	while (bytes >= mtd->erasesize) {
-+		bytes -= mtd->erasesize;
-+		real_offset += mtd->erasesize;
-+		while (mtd_block_isbad(mtd, real_offset)) {
-+			real_offset += mtd->erasesize;
-+
-+			if (real_offset >= mtd->size)
-+				return real_offset - mtd->erasesize;
-+		}
-+	}
-+
-+	real_offset += bytes;
-+
-+	return real_offset;
-+}
-+
- static const char *parser_trx_data_part_name(struct mtd_info *master,
- 					     size_t offset)
- {
-@@ -79,21 +106,21 @@ static int parser_trx_parse(struct mtd_i
- 	if (trx.offset[2]) {
- 		part = &parts[curr_part++];
- 		part->name = "loader";
--		part->offset = trx.offset[i];
-+		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
- 		i++;
- 	}
- 
- 	if (trx.offset[i]) {
- 		part = &parts[curr_part++];
- 		part->name = "linux";
--		part->offset = trx.offset[i];
-+		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
- 		i++;
- 	}
- 
- 	if (trx.offset[i]) {
- 		part = &parts[curr_part++];
--		part->name = parser_trx_data_part_name(mtd, trx.offset[i]);
--		part->offset = trx.offset[i];
-+		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
-+		part->name = parser_trx_data_part_name(mtd, part->offset);
- 		i++;
- 	}
- 
diff --git a/target/linux/generic/pending-5.4/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch b/target/linux/generic/pending-5.4/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
deleted file mode 100644
index 852654d924..0000000000
--- a/target/linux/generic/pending-5.4/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: mtd: bcm47xxpart: detect T_Meter partition
-
-It can be found on many Netgear devices. It consists of many 0x30 blocks
-starting with 4D 54.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/parsers/bcm47xxpart.c
-+++ b/drivers/mtd/parsers/bcm47xxpart.c
-@@ -35,6 +35,7 @@
- #define NVRAM_HEADER			0x48534C46	/* FLSH */
- #define POT_MAGIC1			0x54544f50	/* POTT */
- #define POT_MAGIC2			0x504f		/* OP */
-+#define T_METER_MAGIC			0x4D540000	/* MT */
- #define ML_MAGIC1			0x39685a42
- #define ML_MAGIC2			0x26594131
- #define TRX_MAGIC			0x30524448
-@@ -178,6 +179,15 @@ static int bcm47xxpart_parse(struct mtd_
- 					     MTD_WRITEABLE);
- 			continue;
- 		}
-+
-+		/* T_Meter */
-+		if ((le32_to_cpu(buf[0x000 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
-+		    (le32_to_cpu(buf[0x030 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
-+		    (le32_to_cpu(buf[0x060 / 4]) & 0xFFFF0000) == T_METER_MAGIC) {
-+			bcm47xxpart_add_part(&parts[curr_part++], "T_Meter", offset,
-+					     MTD_WRITEABLE);
-+			continue;
-+		}
- 
- 		/* TRX */
- 		if (buf[0x000 / 4] == TRX_MAGIC) {
diff --git a/target/linux/generic/pending-5.4/435-mtd-add-routerbootpart-parser-config.patch b/target/linux/generic/pending-5.4/435-mtd-add-routerbootpart-parser-config.patch
deleted file mode 100644
index ab1e09a5f1..0000000000
--- a/target/linux/generic/pending-5.4/435-mtd-add-routerbootpart-parser-config.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 4437e01fb6bca63fccdba5d6c44888b0935885c2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Thibaut=20VAR=C3=88NE?= <hacks@slashdirt.org>
-Date: Tue, 24 Mar 2020 11:45:07 +0100
-Subject: [PATCH] generic: routerboot partition build bits (5.4)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch adds routerbootpart kernel build bits
-
-Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
----
- drivers/mtd/parsers/Kconfig  | 9 +++++++++
- drivers/mtd/parsers/Makefile | 1 +
- 2 files changed, 10 insertions(+)
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -195,3 +195,12 @@ config MTD_REDBOOT_PARTS_READONLY
- 	  'FIS directory' images, enable this option.
- 
- endif # MTD_REDBOOT_PARTS
-+
-+config MTD_ROUTERBOOT_PARTS
-+	tristate "RouterBoot flash partition parser"
-+	depends on MTD && OF
-+	help
-+	 MikroTik RouterBoot is implemented as a multi segment system on the
-+	 flash, some of which are fixed and some of which are located at
-+	 variable offsets. This parser handles both cases via properly
-+	 formatted DTS.
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -13,3 +13,4 @@ obj-$(CONFIG_MTD_AFS_PARTS)		+= afs.o
- obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
- obj-$(CONFIG_MTD_SHARPSL_PARTS)		+= sharpslpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS)		+= redboot.o
-+obj-$(CONFIG_MTD_ROUTERBOOT_PARTS)		+= routerbootpart.o
diff --git a/target/linux/generic/pending-5.4/447-mtd-spinand-gigadevice-Add-support-for-GD5F4GQ4xC.patch b/target/linux/generic/pending-5.4/447-mtd-spinand-gigadevice-Add-support-for-GD5F4GQ4xC.patch
deleted file mode 100644
index e1fcb15d5a..0000000000
--- a/target/linux/generic/pending-5.4/447-mtd-spinand-gigadevice-Add-support-for-GD5F4GQ4xC.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 30521ccfb4597f91b9e5c7967acef9c7c85e58a8 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed, 12 Aug 2020 22:50:26 +0200
-Subject: [PATCH v2 447/447] mtd: spinand: gigadevice: Add support for
- GD5F4GQ4xC
-
-This adds support for the following 4GiB chips:
-GD5F4GQ4RCYIG 1.8V
-GD5F4GQ4UCYIG 3.3V
-
-The datasheet can be found here:
-https://www.novitronic.ch/sixcms/media.php/2/DS-00173-GD5F4GQ4xCxIG-Rev1.574695.pdf
-
-The GD5F4GQ4UCYIGT (3.3V) version is used on the Imagination
-Technologies Creator Ci40 (Marduk), the 1.8V version was not tested.
-
-This device only works in single SPI mode and not in dual or quad mode
-for me on this board.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/mtd/nand/spi/gigadevice.c | 49 +++++++++++++++++++++++++++++++
- 1 file changed, 49 insertions(+)
-
---- a/drivers/mtd/nand/spi/gigadevice.c
-+++ b/drivers/mtd/nand/spi/gigadevice.c
-@@ -132,6 +132,35 @@ static const struct mtd_ooblayout_ops gd
- 	.free = gd5fxgq4_variant2_ooblayout_free,
- };
- 
-+static int gd5fxgq4xc_ooblayout_256_ecc(struct mtd_info *mtd, int section,
-+					struct mtd_oob_region *oobregion)
-+{
-+	if (section)
-+		return -ERANGE;
-+
-+	oobregion->offset = 128;
-+	oobregion->length = 128;
-+
-+	return 0;
-+}
-+
-+static int gd5fxgq4xc_ooblayout_256_free(struct mtd_info *mtd, int section,
-+					 struct mtd_oob_region *oobregion)
-+{
-+	if (section)
-+		return -ERANGE;
-+
-+	oobregion->offset = 1;
-+	oobregion->length = 127;
-+
-+	return 0;
-+}
-+
-+static const struct mtd_ooblayout_ops gd5fxgq4xc_oob_256_ops = {
-+	.ecc = gd5fxgq4xc_ooblayout_256_ecc,
-+	.free = gd5fxgq4xc_ooblayout_256_free,
-+};
-+
- static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
- 					u8 status)
- {
-@@ -222,6 +251,24 @@ static const struct spinand_info gigadev
- 		     SPINAND_HAS_QE_BIT,
- 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
- 				     gd5fxgq4xa_ecc_get_status)),
-+	SPINAND_INFO("GD5F4GQ4RC", 0xa468,
-+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgq4xc_oob_256_ops,
-+				     gd5fxgq4ufxxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F4GQ4UC", 0xb468,
-+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgq4xc_oob_256_ops,
-+				     gd5fxgq4ufxxg_ecc_get_status)),
- 	SPINAND_INFO("GD5F1GQ4UExxG", 0xd1,
- 		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
- 		     NAND_ECCREQ(8, 512),
diff --git a/target/linux/generic/pending-5.4/450-mtd-spi-nor-allow-NOR-driver-to-write-fewer-bytes-th.patch b/target/linux/generic/pending-5.4/450-mtd-spi-nor-allow-NOR-driver-to-write-fewer-bytes-th.patch
deleted file mode 100644
index fe2d7a6b23..0000000000
--- a/target/linux/generic/pending-5.4/450-mtd-spi-nor-allow-NOR-driver-to-write-fewer-bytes-th.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Feb 2018 11:11:57 +0100
-Subject: [PATCH] mtd: spi-nor: allow NOR driver to write fewer bytes than
- requested
-
-The write size can be constrained by the maximum message/transfer size
-of the SPI controller. Only check for ret = 0 to avoid an infinite loop.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2706,7 +2706,7 @@ static int spi_nor_write(struct mtd_info
- 
- 		write_enable(nor);
- 		ret = spi_nor_write_data(nor, addr, page_remain, buf + i);
--		if (ret < 0)
-+		if (ret <= 0)
- 			goto write_err;
- 		written = ret;
- 
diff --git a/target/linux/generic/pending-5.4/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch b/target/linux/generic/pending-5.4/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
deleted file mode 100644
index 9983971af5..0000000000
--- a/target/linux/generic/pending-5.4/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: disable cfi cmdset 0002 erase suspend
-
-on some platforms, erase suspend leads to data corruption and lockups when write
-ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh.
-rather than play whack-a-mole with a hard to reproduce issue on a variety of devices,
-simply disable erase suspend, as it will usually not produce any useful gain on
-the small filesystems used on embedded hardware.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -913,7 +913,7 @@ static int get_chip(struct map_info *map
- 		return 0;
- 
- 	case FL_ERASING:
--		if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
-+		if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
- 		    !(mode == FL_READY || mode == FL_POINT ||
- 		    (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
- 			goto sleep;
diff --git a/target/linux/generic/pending-5.4/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch b/target/linux/generic/pending-5.4/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
deleted file mode 100644
index bedd53ccba..0000000000
--- a/target/linux/generic/pending-5.4/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-From: George Kashperko <george@znau.edu.ua>
-Subject: Issue map read after Write Buffer Load command to ensure chip is ready to receive data.
-
-Signed-off-by: George Kashperko <george@znau.edu.ua>
----
- drivers/mtd/chips/cfi_cmdset_0002.c |    1 +
- 1 file changed, 1 insertion(+)
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -2058,6 +2058,7 @@ static int __xipram do_write_buffer(stru
- 
- 	/* Write Buffer Load */
- 	map_write(map, CMD(0x25), cmd_adr);
-+	(void) map_read(map, cmd_adr);
- 
- 	chip->state = FL_WRITING_TO_BUFFER;
- 
diff --git a/target/linux/generic/pending-5.4/465-m25p80-mx-disable-software-protection.patch b/target/linux/generic/pending-5.4/465-m25p80-mx-disable-software-protection.patch
deleted file mode 100644
index 24d2d4567d..0000000000
--- a/target/linux/generic/pending-5.4/465-m25p80-mx-disable-software-protection.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: Disable software protection bits for Macronix flashes.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -4884,6 +4884,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	 */
- 	if (JEDEC_MFR(nor->info) == SNOR_MFR_ATMEL ||
- 	    JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||
-+	    JEDEC_MFR(nor->info) == SNOR_MFR_MACRONIX ||
- 	    JEDEC_MFR(nor->info) == SNOR_MFR_SST ||
- 	    nor->info->flags & SPI_NOR_HAS_LOCK)
- 		nor->clear_sr_bp = spi_nor_clear_sr_bp;
diff --git a/target/linux/generic/pending-5.4/466-Revert-mtd-spi-nor-fix-Spansion-regressions-aliased-.patch b/target/linux/generic/pending-5.4/466-Revert-mtd-spi-nor-fix-Spansion-regressions-aliased-.patch
deleted file mode 100644
index 70f1e9f059..0000000000
--- a/target/linux/generic/pending-5.4/466-Revert-mtd-spi-nor-fix-Spansion-regressions-aliased-.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Matthias Schiffer <mschiffer@universe-factory.net>
-Date: Tue, 9 Jan 2018 20:41:48 +0100
-Subject: [PATCH] Revert "mtd: spi-nor: fix Spansion regressions (aliased with
- Winbond)"
-
-This reverts commit 67b9bcd36906e12a15ffec19463afbbd6a41660e.
-
-The underlying issue breaking Spansion flash has been fixed with "mtd: spi-nor:
-wait until lock/unlock operations are ready" and "mtd: spi-nor: wait for SR_WIP
-to clear on initial unlock", so we can support unlocking for Winbond flash
-again.
-
-Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
----
- drivers/mtd/spi-nor/spi-nor.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -4398,6 +4398,7 @@ static void st_micron_set_default_init(s
- 
- static void winbond_set_default_init(struct spi_nor *nor)
- {
-+	nor->flags |= SNOR_F_HAS_LOCK;
- 	nor->params.set_4byte = winbond_set_4byte;
- }
- 
-@@ -4886,6 +4887,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	    JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||
- 	    JEDEC_MFR(nor->info) == SNOR_MFR_MACRONIX ||
- 	    JEDEC_MFR(nor->info) == SNOR_MFR_SST ||
-+	    JEDEC_MFR(nor->info) == SNOR_MFR_WINBOND ||
- 	    nor->info->flags & SPI_NOR_HAS_LOCK)
- 		nor->clear_sr_bp = spi_nor_clear_sr_bp;
- 
diff --git a/target/linux/generic/pending-5.4/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch b/target/linux/generic/pending-5.4/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch
deleted file mode 100644
index d3e587ff97..0000000000
--- a/target/linux/generic/pending-5.4/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 4 Nov 2017 07:40:23 +0100
-Subject: [PATCH] mtd: spi-nor: support limiting 4K sectors support based on
- flash size
-
-Some devices need 4K sectors to be able to deal with small flash chips.
-For instance, w25x05 is 64 KiB in size, and without 4K sectors, the
-entire chip is just one erase block.
-On bigger flash chip sizes, using 4K sectors can significantly slow down
-many operations, including using a writable filesystem. There are several
-platforms where it makes sense to use a single kernel on both kinds of
-devices.
-
-To support this properly, allow configuring an upper flash chip size
-limit for 4K sectors support.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/mtd/spi-nor/Kconfig
-+++ b/drivers/mtd/spi-nor/Kconfig
-@@ -34,6 +34,17 @@ config SPI_ASPEED_SMC
- 	  and support for the SPI flash memory controller (SPI) for
- 	  the host firmware. The implementation only supports SPI NOR.
- 
-+config MTD_SPI_NOR_USE_4K_SECTORS_LIMIT
-+	int "Maximum flash chip size to use 4K sectors on (in KiB)"
-+	depends on MTD_SPI_NOR_USE_4K_SECTORS
-+	default "4096"
-+	help
-+	  There are many flash chips that support 4K sectors, but are so large
-+	  that using them significantly slows down writing large amounts of
-+	  data or using a writable filesystem.
-+	  Any flash chip larger than the size specified in this option will
-+	  not use 4K sectors.
-+
- config SPI_CADENCE_QUADSPI
- 	tristate "Cadence Quad SPI controller"
- 	depends on OF && (ARM || ARM64 || COMPILE_TEST)
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -4464,6 +4464,7 @@ static void spi_nor_info_init_params(str
- 	struct spi_nor_erase_map *map = &params->erase_map;
- 	const struct flash_info *info = nor->info;
- 	struct device_node *np = spi_nor_get_flash_node(nor);
-+	struct mtd_info *mtd = &nor->mtd;
- 	u8 i, erase_mask;
- 
- 	/* Initialize legacy flash parameters and settings. */
-@@ -4527,6 +4528,21 @@ static void spi_nor_info_init_params(str
- 	 */
- 	erase_mask = 0;
- 	i = 0;
-+#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
-+	if ((info->flags & SECT_4K_PMC) && (mtd->size <=
-+		   CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
-+		erase_mask |= BIT(i);
-+		spi_nor_set_erase_type(&map->erase_type[i], 4096u,
-+				       SPINOR_OP_BE_4K_PMC);
-+		i++;
-+	} else if ((info->flags & SECT_4K) && (mtd->size <=
-+	    CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
-+		erase_mask |= BIT(i);
-+		spi_nor_set_erase_type(&map->erase_type[i], 4096u,
-+				       SPINOR_OP_BE_4K);
-+		i++;
-+	}
-+#else
- 	if (info->flags & SECT_4K_PMC) {
- 		erase_mask |= BIT(i);
- 		spi_nor_set_erase_type(&map->erase_type[i], 4096u,
-@@ -4538,6 +4554,7 @@ static void spi_nor_info_init_params(str
- 				       SPINOR_OP_BE_4K);
- 		i++;
- 	}
-+#endif
- 	erase_mask |= BIT(i);
- 	spi_nor_set_erase_type(&map->erase_type[i], info->sector_size,
- 			       SPINOR_OP_SE);
diff --git a/target/linux/generic/pending-5.4/476-mtd-spi-nor-add-eon-en25q128.patch b/target/linux/generic/pending-5.4/476-mtd-spi-nor-add-eon-en25q128.patch
deleted file mode 100644
index b62dae536b..0000000000
--- a/target/linux/generic/pending-5.4/476-mtd-spi-nor-add-eon-en25q128.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-From: Piotr Dymacz <pepe2k@gmail.com>
-Subject: kernel/mtd: add support for EON EN25Q128
-
-Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2179,6 +2179,7 @@ static const struct flash_info spi_nor_i
- 	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
- 	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
- 	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
-+	{ "en25q128",   INFO(0x1c3018, 0, 64 * 1024,  256, SECT_4K) },
- 	{ "en25q80a",   INFO(0x1c3014, 0, 64 * 1024,   16,
- 			SECT_4K | SPI_NOR_DUAL_READ) },
- 	{ "en25qh32",   INFO(0x1c7016, 0, 64 * 1024,   64, 0) },
diff --git a/target/linux/generic/pending-5.4/479-mtd-spi-nor-add-xtx-xt25f128b.patch b/target/linux/generic/pending-5.4/479-mtd-spi-nor-add-xtx-xt25f128b.patch
deleted file mode 100644
index 39e02604fe..0000000000
--- a/target/linux/generic/pending-5.4/479-mtd-spi-nor-add-xtx-xt25f128b.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From patchwork Thu Feb  6 17:19:41 2020
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 1234465
-Date: Thu, 6 Feb 2020 19:19:41 +0200
-From: Daniel Golle <daniel@makrotopia.org>
-To: linux-mtd@lists.infradead.org
-Subject: [PATCH v2] mtd: spi-nor: Add support for xt25f128b chip
-Message-ID: <20200206171941.GA2398@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-List-Subscribe: <http://lists.infradead.org/mailman/listinfo/linux-mtd>,
- <mailto:linux-mtd-request@lists.infradead.org?subject=subscribe>
-Cc: Eitan Cohen <eitan@neot-semadar.com>, Piotr Dymacz <pepe2k@gmail.com>,
- Tudor Ambarus <tudor.ambarus@microchip.com>
-Sender: "linux-mtd" <linux-mtd-bounces@lists.infradead.org>
-Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org
-
-Add XT25F128B made by XTX Technology (Shenzhen) Limited.
-This chip supports dual and quad read and uniform 4K-byte erase.
-Verified on Teltonika RUT955 which comes with XT25F128B in recent
-versions of the device.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/spi-nor/spi-nor.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2506,6 +2506,9 @@ static const struct flash_info spi_nor_i
- 	/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
- 	{ "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- 	{ "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+
-+	/* XTX Technology (Shenzhen) Limited */
-+	{ "xt25f128b", INFO(0x0B4018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- 	{ },
- };
- 
diff --git a/target/linux/generic/pending-5.4/480-mtd-set-rootfs-to-be-root-dev.patch b/target/linux/generic/pending-5.4/480-mtd-set-rootfs-to-be-root-dev.patch
deleted file mode 100644
index 95863d6edb..0000000000
--- a/target/linux/generic/pending-5.4/480-mtd-set-rootfs-to-be-root-dev.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: kernel/3.1[02]: move MTD root device setup code to mtdcore
-
-The current code only allows to automatically set
-root device on MTD partitions. Move the code to MTD
-core to allow to use it with all MTD devices.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdcore.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -27,6 +27,7 @@
- #include <linux/reboot.h>
- #include <linux/leds.h>
- #include <linux/debugfs.h>
-+#include <linux/root_dev.h>
- #include <linux/nvmem-provider.h>
- 
- #include <linux/mtd/mtd.h>
-@@ -699,6 +700,15 @@ int add_mtd_device(struct mtd_info *mtd)
- 	   of this try_ nonsense, and no bitching about it
- 	   either. :) */
- 	__module_get(THIS_MODULE);
-+
-+	if (!strcmp(mtd->name, "rootfs") &&
-+	    IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+	    ROOT_DEV == 0) {
-+		pr_notice("mtd: device %d (%s) set to be root filesystem\n",
-+			  mtd->index, mtd->name);
-+		ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
-+	}
-+
- 	return 0;
- 
- fail_nvmem_add:
diff --git a/target/linux/generic/pending-5.4/481-mtd-spi-nor-rework-broken-flash-reset-support.patch b/target/linux/generic/pending-5.4/481-mtd-spi-nor-rework-broken-flash-reset-support.patch
deleted file mode 100644
index 81b4f190d4..0000000000
--- a/target/linux/generic/pending-5.4/481-mtd-spi-nor-rework-broken-flash-reset-support.patch
+++ /dev/null
@@ -1,167 +0,0 @@
-From ea92cbb50a78404e29de2cc3999a240615ffb1c8 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Mon, 6 Apr 2020 17:58:48 +0800
-Subject: [PATCH] mtd: spi-nor: rework broken-flash-reset support
-
-Instead of resetting flash to 3B address on remove hook, this
-implementation only enters 4B mode when needed, which prevents
-more unexpected reboot stuck. This implementation makes it only
-break when a kernel panic happens during flash operation on 16M+
-areas.
-*OpenWrt only*: silent broken-flash-reset warning. We are not dealing
-with vendors and it's unpleasant for users to se that unnecessary
-and long WARN_ON print.
-
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 52 +++++++++++++++++++++++++++++++++--
- 1 file changed, 49 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -616,6 +616,22 @@ static void spi_nor_set_4byte_opcodes(st
- 	}
- }
- 
-+static int spi_nor_check_set_addr_width(struct spi_nor *nor, loff_t addr)
-+{
-+	u8 addr_width;
-+
-+	if ((nor->flags & (SNOR_F_4B_OPCODES | SNOR_F_BROKEN_RESET)) !=
-+	    SNOR_F_BROKEN_RESET)
-+		return 0;
-+
-+	addr_width = addr & 0xff000000 ? 4 : 3;
-+	if (nor->addr_width == addr_width)
-+		return 0;
-+
-+	nor->addr_width = addr_width;
-+	return nor->params.set_4byte(nor, addr_width == 4);
-+}
-+
- static int macronix_set_4byte(struct spi_nor *nor, bool enable)
- {
- 	if (nor->spimem) {
-@@ -1261,6 +1277,10 @@ static int spi_nor_erase(struct mtd_info
- 	if (ret)
- 		return ret;
- 
-+	ret = spi_nor_check_set_addr_width(nor, instr->addr + instr->len);
-+	if (ret < 0)
-+		return ret;
-+
- 	/* whole-chip erase? */
- 	if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) {
- 		unsigned long timeout;
-@@ -1317,6 +1337,7 @@ static int spi_nor_erase(struct mtd_info
- 	write_disable(nor);
- 
- erase_err:
-+	spi_nor_check_set_addr_width(nor, 0);
- 	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
- 
- 	return ret;
-@@ -1623,7 +1644,9 @@ static int spi_nor_lock(struct mtd_info
- 	if (ret)
- 		return ret;
- 
-+	spi_nor_check_set_addr_width(nor, ofs + len);
- 	ret = nor->params.locking_ops->lock(nor, ofs, len);
-+	spi_nor_check_set_addr_width(nor, 0);
- 
- 	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_UNLOCK);
- 	return ret;
-@@ -1638,7 +1661,9 @@ static int spi_nor_unlock(struct mtd_inf
- 	if (ret)
- 		return ret;
- 
-+	spi_nor_check_set_addr_width(nor, ofs + len);
- 	ret = nor->params.locking_ops->unlock(nor, ofs, len);
-+	spi_nor_check_set_addr_width(nor, 0);
- 
- 	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
- 	return ret;
-@@ -1653,7 +1678,9 @@ static int spi_nor_is_locked(struct mtd_
- 	if (ret)
- 		return ret;
- 
-+	spi_nor_check_set_addr_width(nor, ofs + len);
- 	ret = nor->params.locking_ops->is_locked(nor, ofs, len);
-+	spi_nor_check_set_addr_width(nor, 0);
- 
- 	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
- 	return ret;
-@@ -2559,6 +2586,10 @@ static int spi_nor_read(struct mtd_info
- 	if (ret)
- 		return ret;
- 
-+	ret = spi_nor_check_set_addr_width(nor, from + len);
-+	if (ret < 0)
-+		return ret;
-+
- 	while (len) {
- 		loff_t addr = from;
- 
-@@ -2582,6 +2613,7 @@ static int spi_nor_read(struct mtd_info
- 	ret = 0;
- 
- read_err:
-+	spi_nor_check_set_addr_width(nor, 0);
- 	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ);
- 	return ret;
- }
-@@ -2599,6 +2631,10 @@ static int sst_write(struct mtd_info *mt
- 	if (ret)
- 		return ret;
- 
-+	ret = spi_nor_check_set_addr_width(nor, to + len);
-+	if (ret < 0)
-+		return ret;
-+
- 	write_enable(nor);
- 
- 	nor->sst_write_second = false;
-@@ -2661,6 +2697,7 @@ static int sst_write(struct mtd_info *mt
- 	}
- sst_write_err:
- 	*retlen += actual;
-+	spi_nor_check_set_addr_width(nor, 0);
- 	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
- 	return ret;
- }
-@@ -2683,6 +2720,10 @@ static int spi_nor_write(struct mtd_info
- 	if (ret)
- 		return ret;
- 
-+	ret = spi_nor_check_set_addr_width(nor, to + len);
-+	if (ret < 0)
-+		return ret;
-+
- 	for (i = 0; i < len; ) {
- 		ssize_t written;
- 		loff_t addr = to + i;
-@@ -2722,6 +2763,7 @@ static int spi_nor_write(struct mtd_info
- 	}
- 
- write_err:
-+	spi_nor_check_set_addr_width(nor, 0);
- 	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
- 	return ret;
- }
-@@ -4726,9 +4768,13 @@ static int spi_nor_init(struct spi_nor *
- 		 * reboots (e.g., crashes). Warn the user (or hopefully, system
- 		 * designer) that this is bad.
- 		 */
--		WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
--			  "enabling reset hack; may not recover from unexpected reboots\n");
--		nor->params.set_4byte(nor, true);
-+		if (nor->flags & SNOR_F_BROKEN_RESET) {
-+			dev_warn(nor->dev,
-+				"enabling reset hack; may not recover from unexpected reboots\n");
-+			nor->addr_width = 3;
-+		} else {
-+			nor->params.set_4byte(nor, true);
-+		}
- 	}
- 
- 	return 0;
diff --git a/target/linux/generic/pending-5.4/482-mtd-spi-nor-add-support-for-Gigadevice-GD25D05.patch b/target/linux/generic/pending-5.4/482-mtd-spi-nor-add-support-for-Gigadevice-GD25D05.patch
deleted file mode 100644
index 3a22133230..0000000000
--- a/target/linux/generic/pending-5.4/482-mtd-spi-nor-add-support-for-Gigadevice-GD25D05.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From d68b4aa22e8c625685bfad642dd7337948dc0ad1 Mon Sep 17 00:00:00 2001
-From: Koen Vandeputte <koen.vandeputte@ncentric.com>
-Date: Mon, 6 Jan 2020 13:07:56 +0100
-Subject: [PATCH] mtd: spi-nor: add support for Gigadevice GD25D05
-
-Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2232,6 +2232,11 @@ static const struct flash_info spi_nor_i
- 
- 	/* GigaDevice */
- 	{
-+		"gd25d05", INFO(0xc84010, 0, 64 * 1024,  1,
-+			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-+			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-+	},
-+	{
- 		"gd25q16", INFO(0xc84015, 0, 64 * 1024,  32,
- 			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- 			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
diff --git a/target/linux/generic/pending-5.4/482-mtd-spi-nor-fix-4-byte-opcode-support-for-w25q256.patch b/target/linux/generic/pending-5.4/482-mtd-spi-nor-fix-4-byte-opcode-support-for-w25q256.patch
deleted file mode 100644
index 63366e6032..0000000000
--- a/target/linux/generic/pending-5.4/482-mtd-spi-nor-fix-4-byte-opcode-support-for-w25q256.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From: Mantas Pucka <mantas@8devices.com>
-To: linux-mtd@lists.infradead.org
-Subject: [PATCH] mtd: spi-nor: fix 4-byte opcode support for w25q256
-Date: Wed, 15 Apr 2020 16:48:30 +0300
-Message-ID: <1586958510-24012-1-git-send-email-mantas@8devices.com>
-
-There are 2 different chips (w25q256fv and w25q256jv) that share
-the same JEDEC ID. Only w25q256jv fully supports 4-byte opcodes.
-Use SFDP header version to differentiate between them.
-
-for OpenWRT only: rebased to linux-v5.4
-
-Signed-off-by: Mantas Pucka <mantas@8devices.com>
----
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2172,6 +2172,32 @@ static struct spi_nor_fixups gd25q256_fi
- 	.default_init = gd25q256_default_init,
- };
- 
-+static int
-+w25q256_post_bfpt_fixups(struct spi_nor *nor,
-+			 const struct sfdp_parameter_header *bfpt_header,
-+			 const struct sfdp_bfpt *bfpt,
-+			 struct spi_nor_flash_parameter *params)
-+{
-+	/*
-+	 * W25Q256JV supports 4B opcodes but W25Q256FV does not.
-+	 * Unfortunately, Winbond has re-used the same JEDEC ID for both
-+	 * variants which prevents us from defining a new entry in the parts
-+	 * table.
-+	 * To differentiate between W25Q256JV and W25Q256FV check SFDP header
-+	 * version: only JV has JESD216A compliant structure (version 5)
-+	 */
-+
-+	if (bfpt_header->major == SFDP_JESD216_MAJOR &&
-+	    bfpt_header->minor == SFDP_JESD216A_MINOR)
-+		nor->flags |= SNOR_F_4B_OPCODES;
-+
-+	return 0;
-+}
-+
-+static struct spi_nor_fixups w25q256_fixups = {
-+	.post_bfpt = w25q256_post_bfpt_fixups,
-+};
-+
- /* NOTE: double check command sets and memory organization when you add
-  * more nor chips.  This current list focusses on newer chips, which
-  * have been converging on command sets which including JEDEC ID.
-@@ -2515,7 +2541,8 @@ static const struct flash_info spi_nor_i
- 	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
- 	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
- 	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
--	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-+			  .fixups = &w25q256_fixups },
- 	{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
- 			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- 	{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
diff --git a/target/linux/generic/pending-5.4/483-mtd-spinand-add-support-for-xtx-xt26g0xa.patch b/target/linux/generic/pending-5.4/483-mtd-spinand-add-support-for-xtx-xt26g0xa.patch
deleted file mode 100644
index 56cfc93c46..0000000000
--- a/target/linux/generic/pending-5.4/483-mtd-spinand-add-support-for-xtx-xt26g0xa.patch
+++ /dev/null
@@ -1,195 +0,0 @@
-From 8ffe91b6b429277bd7bd79267ba836edf951dce2 Mon Sep 17 00:00:00 2001
-From: Felix Matouschek <felix@matouschek.org>
-Date: Fri, 2 Jul 2021 20:31:23 +0200
-Subject: [PATCH] mtd: spinand: Add support for XTX XT26G0xA
-
-Add support for XTX Technology XT26G01AXXXXX, XTX26G02AXXXXX and
-XTX26G04AXXXXX SPI NAND.
-
-These are 3V, 1G/2G/4Gbit serial SLC NAND flash devices with on-die ECC
-(8bit strength per 512bytes).
-
-Tested on Teltonika RUTX10 flashed with OpenWrt.
-
-Datasheets available at
-http://www.xtxtech.com/download/?AId=225
-https://datasheet.lcsc.com/szlcsc/2005251034_XTX-XT26G01AWSEGA_C558841.pdf
-
-Signed-off-by: Felix Matouschek <felix@matouschek.org>
----
- drivers/mtd/nand/spi/Makefile |   2 +-
- drivers/mtd/nand/spi/core.c   |   1 +
- drivers/mtd/nand/spi/xtx.c    | 139 ++++++++++++++++++++++++++++++++++
- include/linux/mtd/spinand.h   |   1 +
- 4 files changed, 142 insertions(+), 1 deletion(-)
- create mode 100644 drivers/mtd/nand/spi/xtx.c
-
---- a/drivers/mtd/nand/spi/Makefile
-+++ b/drivers/mtd/nand/spi/Makefile
-@@ -1,3 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0
--spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
-+spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
- obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
---- a/drivers/mtd/nand/spi/core.c
-+++ b/drivers/mtd/nand/spi/core.c
-@@ -758,6 +758,7 @@ static const struct spinand_manufacturer
- 	&paragon_spinand_manufacturer,
- 	&toshiba_spinand_manufacturer,
- 	&winbond_spinand_manufacturer,
-+	&xtx_spinand_manufacturer,
- };
- 
- static int spinand_manufacturer_detect(struct spinand_device *spinand)
---- /dev/null
-+++ b/drivers/mtd/nand/spi/xtx.c
-@@ -0,0 +1,139 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Author:
-+ * Felix Matouschek <felix@matouschek.org>
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/kernel.h>
-+#include <linux/mtd/spinand.h>
-+
-+#define SPINAND_MFR_XTX	0x0B
-+
-+#define XT26G0XA_STATUS_ECC_MASK	GENMASK(5, 2)
-+#define XT26G0XA_STATUS_ECC_NO_DETECTED	(0 << 2)
-+#define XT26G0XA_STATUS_ECC_8_CORRECTED	(3 << 4)
-+#define XT26G0XA_STATUS_ECC_UNCOR_ERROR	(2 << 4)
-+
-+static SPINAND_OP_VARIANTS(read_cache_variants,
-+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(write_cache_variants,
-+		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
-+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(update_cache_variants,
-+		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
-+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
-+
-+static int xt26g0xa_ooblayout_ecc(struct mtd_info *mtd, int section,
-+				   struct mtd_oob_region *region)
-+{
-+	if (section)
-+		return -ERANGE;
-+
-+	region->offset = 8;
-+	region->length = 40;
-+
-+	return 0;
-+}
-+
-+static int xt26g0xa_ooblayout_free(struct mtd_info *mtd, int section,
-+				   struct mtd_oob_region *region)
-+{
-+	if (section)
-+		return -ERANGE;
-+
-+	region->offset = 1;
-+	region->length = 7;
-+
-+	return 0;
-+}
-+
-+static const struct mtd_ooblayout_ops xt26g0xa_ooblayout = {
-+	.ecc = xt26g0xa_ooblayout_ecc,
-+	.free = xt26g0xa_ooblayout_free,
-+};
-+
-+static int xt26g0xa_ecc_get_status(struct spinand_device *spinand,
-+					 u8 status)
-+{
-+	switch (status & XT26G0XA_STATUS_ECC_MASK) {
-+	case XT26G0XA_STATUS_ECC_NO_DETECTED:
-+		return 0;
-+	case XT26G0XA_STATUS_ECC_8_CORRECTED:
-+		return 8;
-+	case XT26G0XA_STATUS_ECC_UNCOR_ERROR:
-+		return -EBADMSG;
-+	default: /* (1 << 2) through (7 << 2) are 1-7 corrected errors */
-+		return (status & XT26G0XA_STATUS_ECC_MASK) >> 2;
-+	}
-+
-+	return -EINVAL;
-+}
-+
-+static const struct spinand_info xtx_spinand_table[] = {
-+	SPINAND_INFO("XT26G01A", 0xE1,
-+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&xt26g0xa_ooblayout,
-+				     xt26g0xa_ecc_get_status)),
-+	SPINAND_INFO("XT26G02A", 0xE2,
-+		     NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&xt26g0xa_ooblayout,
-+				     xt26g0xa_ecc_get_status)),
-+	SPINAND_INFO("XT26G04A", 0xE3,
-+		     NAND_MEMORG(1, 2048, 64, 128, 2048, 40, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&xt26g0xa_ooblayout,
-+				     xt26g0xa_ecc_get_status)),
-+};
-+
-+static int xtx_spinand_detect(struct spinand_device *spinand)
-+{
-+	u8 *id = spinand->id.data;
-+	int ret;
-+
-+	/*
-+	 * XTX SPI NAND read ID needs a dummy byte, so the first byte in
-+	 * raw_id is garbage.
-+	 */
-+	if (id[1] != SPINAND_MFR_XTX)
-+		return 0;
-+
-+	ret = spinand_match_and_init(spinand, xtx_spinand_table,
-+				     ARRAY_SIZE(xtx_spinand_table),
-+				     id[2]);
-+	if (ret)
-+		return ret;
-+
-+	return 1;
-+}
-+
-+static const struct spinand_manufacturer_ops xtx_spinand_manuf_ops = {
-+	.detect = xtx_spinand_detect,
-+};
-+
-+const struct spinand_manufacturer xtx_spinand_manufacturer = {
-+	.id = SPINAND_MFR_XTX,
-+	.name = "XTX",
-+	.ops = &xtx_spinand_manuf_ops,
-+};
---- a/include/linux/mtd/spinand.h
-+++ b/include/linux/mtd/spinand.h
-@@ -230,6 +230,7 @@ extern const struct spinand_manufacturer
- extern const struct spinand_manufacturer paragon_spinand_manufacturer;
- extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
- extern const struct spinand_manufacturer winbond_spinand_manufacturer;
-+extern const struct spinand_manufacturer xtx_spinand_manufacturer;
- 
- /**
-  * struct spinand_op_variants - SPI NAND operation variants
diff --git a/target/linux/generic/pending-5.4/484-mtd-spi-nor-add-esmt-f25l16pa.patch b/target/linux/generic/pending-5.4/484-mtd-spi-nor-add-esmt-f25l16pa.patch
deleted file mode 100644
index 0a7d4f86d5..0000000000
--- a/target/linux/generic/pending-5.4/484-mtd-spi-nor-add-esmt-f25l16pa.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2243,6 +2243,7 @@ static const struct flash_info spi_nor_i
- 	{ "en25s64",	INFO(0x1c3817, 0, 64 * 1024,  128, SECT_4K) },
- 
- 	/* ESMT */
-+	{ "f25l16pa-2s", INFO(0x8c2115, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_HAS_LOCK) },
- 	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK) },
- 	{ "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK) },
- 	{ "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_HAS_LOCK) },
diff --git a/target/linux/generic/pending-5.4/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch b/target/linux/generic/pending-5.4/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
deleted file mode 100644
index b21daea4f0..0000000000
--- a/target/linux/generic/pending-5.4/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: auto-attach mtd device named "ubi" or "data" on boot
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/build.c | 36 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/drivers/mtd/ubi/build.c
-+++ b/drivers/mtd/ubi/build.c
-@@ -1168,6 +1168,73 @@ static struct mtd_info * __init open_mtd
- 	return mtd;
- }
- 
-+/*
-+ * This function tries attaching mtd partitions named either "ubi" or "data"
-+ * during boot.
-+ */
-+static void __init ubi_auto_attach(void)
-+{
-+	int err;
-+	struct mtd_info *mtd;
-+	loff_t offset = 0;
-+	size_t len;
-+	char magic[4];
-+
-+	/* try attaching mtd device named "ubi" or "data" */
-+	mtd = open_mtd_device("ubi");
-+	if (IS_ERR(mtd))
-+		mtd = open_mtd_device("data");
-+
-+	if (IS_ERR(mtd))
-+		return;
-+
-+	/* get the first not bad block */
-+	if (mtd_can_have_bb(mtd))
-+		while (mtd_block_isbad(mtd, offset)) {
-+			offset += mtd->erasesize;
-+
-+			if (offset > mtd->size) {
-+				pr_err("UBI error: Failed to find a non-bad "
-+				       "block on mtd%d\n", mtd->index);
-+				goto cleanup;
-+			}
-+		}
-+
-+	/* check if the read from flash was successful */
-+	err = mtd_read(mtd, offset, 4, &len, (void *) magic);
-+	if ((err && !mtd_is_bitflip(err)) || len != 4) {
-+		pr_err("UBI error: unable to read from mtd%d\n", mtd->index);
-+		goto cleanup;
-+	}
-+
-+	/* check for a valid ubi magic */
-+	if (strncmp(magic, "UBI#", 4)) {
-+		pr_err("UBI error: no valid UBI magic found inside mtd%d\n", mtd->index);
-+		goto cleanup;
-+	}
-+
-+	/* don't auto-add media types where UBI doesn't makes sense */
-+	if (mtd->type != MTD_NANDFLASH &&
-+	    mtd->type != MTD_NORFLASH &&
-+	    mtd->type != MTD_DATAFLASH &&
-+	    mtd->type != MTD_MLCNANDFLASH)
-+		goto cleanup;
-+
-+	mutex_lock(&ubi_devices_mutex);
-+	pr_notice("UBI: auto-attach mtd%d\n", mtd->index);
-+	err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, 0, 0);
-+	mutex_unlock(&ubi_devices_mutex);
-+	if (err < 0) {
-+		pr_err("UBI error: cannot attach mtd%d\n", mtd->index);
-+		goto cleanup;
-+	}
-+
-+	return;
-+
-+cleanup:
-+	put_mtd_device(mtd);
-+}
-+
- static int __init ubi_init(void)
- {
- 	int err, i, k;
-@@ -1251,6 +1318,12 @@ static int __init ubi_init(void)
- 		}
- 	}
- 
-+	/* auto-attach mtd devices only if built-in to the kernel and no ubi.mtd
-+	 * parameter was given */
-+	if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+	    !ubi_is_module() && !mtd_devs)
-+		ubi_auto_attach();
-+
- 	err = ubiblock_init();
- 	if (err) {
- 		pr_err("UBI error: block: cannot initialize, error %d\n", err);
diff --git a/target/linux/generic/pending-5.4/491-ubi-auto-create-ubiblock-device-for-rootfs.patch b/target/linux/generic/pending-5.4/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
deleted file mode 100644
index a2b48fd4fc..0000000000
--- a/target/linux/generic/pending-5.4/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: auto-create ubiblock device for rootfs
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 42 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -652,6 +652,47 @@ static void __init ubiblock_create_from_
- 	}
- }
- 
-+#define UBIFS_NODE_MAGIC  0x06101831
-+static inline int ubi_vol_is_ubifs(struct ubi_volume_desc *desc)
-+{
-+	int ret;
-+	uint32_t magic_of, magic;
-+	ret = ubi_read(desc, 0, (char *)&magic_of, 0, 4);
-+	if (ret)
-+		return 0;
-+	magic = le32_to_cpu(magic_of);
-+	return magic == UBIFS_NODE_MAGIC;
-+}
-+
-+static void __init ubiblock_create_auto_rootfs(void)
-+{
-+	int ubi_num, ret, is_ubifs;
-+	struct ubi_volume_desc *desc;
-+	struct ubi_volume_info vi;
-+
-+	for (ubi_num = 0; ubi_num < UBI_MAX_DEVICES; ubi_num++) {
-+		desc = ubi_open_volume_nm(ubi_num, "rootfs", UBI_READONLY);
-+		if (IS_ERR(desc))
-+			desc = ubi_open_volume_nm(ubi_num, "fit", UBI_READONLY);;
-+
-+		if (IS_ERR(desc))
-+			continue;
-+
-+		ubi_get_volume_info(desc, &vi);
-+		is_ubifs = ubi_vol_is_ubifs(desc);
-+		ubi_close_volume(desc);
-+		if (is_ubifs)
-+			break;
-+
-+		ret = ubiblock_create(&vi);
-+		if (ret)
-+			pr_err("UBI error: block: can't add '%s' volume, err=%d\n",
-+				vi.name, ret);
-+		/* always break if we get here */
-+		break;
-+	}
-+}
-+
- static void ubiblock_remove_all(void)
- {
- 	struct ubiblock *next;
-@@ -684,6 +725,10 @@ int __init ubiblock_init(void)
- 	 */
- 	ubiblock_create_from_param();
- 
-+	/* auto-attach "rootfs" volume if existing and non-ubifs */
-+	if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV))
-+		ubiblock_create_auto_rootfs();
-+
- 	/*
- 	 * Block devices are only created upon user requests, so we ignore
- 	 * existing volumes.
diff --git a/target/linux/generic/pending-5.4/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch b/target/linux/generic/pending-5.4/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
deleted file mode 100644
index e207c0d00d..0000000000
--- a/target/linux/generic/pending-5.4/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: try auto-mounting ubi0:rootfs in init/do_mounts.c
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- init/do_mounts.c | 26 +++++++++++++++++++++++++-
- 1 file changed, 25 insertions(+), 1 deletion(-)
-
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -460,7 +460,30 @@ retry:
- out:
- 	put_page(page);
- }
-- 
-+
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+static int __init mount_ubi_rootfs(void)
-+{
-+	int flags = MS_SILENT;
-+	int err, tried = 0;
-+
-+	while (tried < 2) {
-+		err = do_mount_root("ubi0:rootfs", "ubifs", flags, \
-+					root_mount_data);
-+		switch (err) {
-+			case -EACCES:
-+				flags |= MS_RDONLY;
-+				tried++;
-+				break;
-+			default:
-+				return err;
-+		}
-+	}
-+
-+	return -EINVAL;
-+}
-+#endif
-+
- #ifdef CONFIG_ROOT_NFS
- 
- #define NFSROOT_TIMEOUT_MIN	5
-@@ -554,6 +577,10 @@ void __init mount_root(void)
- 			change_floppy("root floppy");
- 	}
- #endif
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+	if (!mount_ubi_rootfs())
-+		return;
-+#endif
- #ifdef CONFIG_BLOCK
- 	{
- 		int err = create_dev("/dev/root", ROOT_DEV);
diff --git a/target/linux/generic/pending-5.4/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch b/target/linux/generic/pending-5.4/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
deleted file mode 100644
index 2dff46807e..0000000000
--- a/target/linux/generic/pending-5.4/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: set ROOT_DEV to ubiblock "rootfs" if unset
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -42,6 +42,7 @@
- #include <linux/scatterlist.h>
- #include <linux/idr.h>
- #include <asm/div64.h>
-+#include <linux/root_dev.h>
- 
- #include "ubi-media.h"
- #include "ubi.h"
-@@ -458,6 +459,15 @@ int ubiblock_create(struct ubi_volume_in
- 	dev_info(disk_to_dev(dev->gd), "created from ubi%d:%d(%s)",
- 		 dev->ubi_num, dev->vol_id, vi->name);
- 	mutex_unlock(&devices_mutex);
-+
-+	if (!strcmp(vi->name, "rootfs") &&
-+	    IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+	    ROOT_DEV == 0) {
-+		pr_notice("ubiblock: device ubiblock%d_%d (%s) set to be root filesystem\n",
-+			  dev->ubi_num, dev->vol_id, vi->name);
-+		ROOT_DEV = MKDEV(gd->major, gd->first_minor);
-+	}
-+
- 	return 0;
- 
- out_free_queue:
diff --git a/target/linux/generic/pending-5.4/494-mtd-ubi-add-EOF-marker-support.patch b/target/linux/generic/pending-5.4/494-mtd-ubi-add-EOF-marker-support.patch
deleted file mode 100644
index fc48146221..0000000000
--- a/target/linux/generic/pending-5.4/494-mtd-ubi-add-EOF-marker-support.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: mtd: add EOF marker support to the UBI layer
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/ubi/attach.c | 25 ++++++++++++++++++++++---
- drivers/mtd/ubi/ubi.h    |  1 +
- 2 files changed, 23 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -926,6 +926,13 @@ static bool vol_ignored(int vol_id)
- #endif
- }
- 
-+static bool ec_hdr_has_eof(struct ubi_ec_hdr *ech)
-+{
-+	return ech->padding1[0] == 'E' &&
-+	       ech->padding1[1] == 'O' &&
-+	       ech->padding1[2] == 'F';
-+}
-+
- /**
-  * scan_peb - scan and process UBI headers of a PEB.
-  * @ubi: UBI device description object
-@@ -958,9 +965,21 @@ static int scan_peb(struct ubi_device *u
- 		return 0;
- 	}
- 
--	err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
--	if (err < 0)
--		return err;
-+	if (!ai->eof_found) {
-+		err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
-+		if (err < 0)
-+			return err;
-+
-+		if (ec_hdr_has_eof(ech)) {
-+			pr_notice("UBI: EOF marker found, PEBs from %d will be erased\n",
-+				pnum);
-+			ai->eof_found = true;
-+		}
-+	}
-+
-+	if (ai->eof_found)
-+		err = UBI_IO_FF_BITFLIPS;
-+
- 	switch (err) {
- 	case 0:
- 		break;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -780,6 +780,7 @@ struct ubi_attach_info {
- 	int mean_ec;
- 	uint64_t ec_sum;
- 	int ec_count;
-+	bool eof_found;
- 	struct kmem_cache *aeb_slab_cache;
- 	struct ubi_ec_hdr *ech;
- 	struct ubi_vid_io_buf *vidb;
diff --git a/target/linux/generic/pending-5.4/495-mtd-core-add-get_mtd_device_by_node.patch b/target/linux/generic/pending-5.4/495-mtd-core-add-get_mtd_device_by_node.patch
deleted file mode 100644
index a173381820..0000000000
--- a/target/linux/generic/pending-5.4/495-mtd-core-add-get_mtd_device_by_node.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 1bd1b740f208d1cf4071932cc51860d37266c402 Mon Sep 17 00:00:00 2001
-From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Date: Sat, 1 Sep 2018 00:30:11 +0200
-Subject: [PATCH 495/497] mtd: core: add get_mtd_device_by_node
-
-Add function to retrieve a mtd device by its OF node. Since drivers can
-assign arbitrary names to mtd devices in the absence of a label
-property, there is no other reliable way to retrieve a mtd device for a
-given OF node.
-
-Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/mtd/mtdcore.c   | 38 ++++++++++++++++++++++++++++++++++++++
- include/linux/mtd/mtd.h |  2 ++
- 2 files changed, 40 insertions(+)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -1053,6 +1053,44 @@ out_unlock:
- }
- EXPORT_SYMBOL_GPL(get_mtd_device_nm);
- 
-+/**
-+ *	get_mtd_device_by_node - obtain a validated handle for an MTD device
-+ *	by of_node
-+ *	@of_node: OF node of MTD device to open
-+ *
-+ *	This function returns MTD device description structure in case of
-+ *	success and an error code in case of failure.
-+ */
-+struct mtd_info *get_mtd_device_by_node(const struct device_node *of_node)
-+{
-+	int err = -ENODEV;
-+	struct mtd_info *mtd = NULL, *other;
-+
-+	mutex_lock(&mtd_table_mutex);
-+
-+	mtd_for_each_device(other) {
-+		if (of_node == other->dev.of_node) {
-+			mtd = other;
-+			break;
-+		}
-+	}
-+
-+	if (!mtd)
-+		goto out_unlock;
-+
-+	err = __get_mtd_device(mtd);
-+	if (err)
-+		goto out_unlock;
-+
-+	mutex_unlock(&mtd_table_mutex);
-+	return mtd;
-+
-+out_unlock:
-+	mutex_unlock(&mtd_table_mutex);
-+	return ERR_PTR(err);
-+}
-+EXPORT_SYMBOL_GPL(get_mtd_device_by_node);
-+
- void put_mtd_device(struct mtd_info *mtd)
- {
- 	mutex_lock(&mtd_table_mutex);
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -586,6 +586,8 @@ extern struct mtd_info *get_mtd_device(s
- extern int __get_mtd_device(struct mtd_info *mtd);
- extern void __put_mtd_device(struct mtd_info *mtd);
- extern struct mtd_info *get_mtd_device_nm(const char *name);
-+extern struct mtd_info *get_mtd_device_by_node(
-+		const struct device_node *of_node);
- extern void put_mtd_device(struct mtd_info *mtd);
- 
- 
diff --git a/target/linux/generic/pending-5.4/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch b/target/linux/generic/pending-5.4/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch
deleted file mode 100644
index 01f3b9ec2d..0000000000
--- a/target/linux/generic/pending-5.4/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 5734c6669fba7ddb5ef491ccff7159d15dba0b59 Mon Sep 17 00:00:00 2001
-From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Date: Wed, 5 Sep 2018 01:32:51 +0200
-Subject: [PATCH 496/497] dt-bindings: add bindings for mtd-concat devices
-
-Document virtual mtd-concat device bindings.
-
-Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
----
- .../devicetree/bindings/mtd/mtd-concat.txt    | 36 +++++++++++++++++++
- 1 file changed, 36 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/mtd-concat.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/mtd-concat.txt
-@@ -0,0 +1,36 @@
-+Virtual MTD concat device
-+
-+Requires properties:
-+- devices: list of phandles to mtd nodes that should be concatenated
-+
-+Example:
-+
-+&spi {
-+	flash0: flash@0 {
-+		...
-+	};
-+	flash1: flash@1 {
-+		...
-+	};
-+};
-+
-+flash {
-+	compatible = "mtd-concat";
-+
-+	devices = <&flash0 &flash1>;
-+
-+	partitions {
-+		compatible = "fixed-partitions";
-+
-+		partition@0 {
-+			label = "boot";
-+			reg = <0x0000000 0x0040000>;
-+			read-only;
-+		};
-+
-+		partition@40000 {
-+			label = "firmware";
-+			reg = <0x0040000 0x1fc0000>;
-+		};
-+	}
-+}
diff --git a/target/linux/generic/pending-5.4/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch b/target/linux/generic/pending-5.4/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch
deleted file mode 100644
index 1c42ed7bff..0000000000
--- a/target/linux/generic/pending-5.4/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch
+++ /dev/null
@@ -1,216 +0,0 @@
-From e53f712d8eac71f54399b61038ccf87d2cee99d7 Mon Sep 17 00:00:00 2001
-From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Date: Sat, 25 Aug 2018 12:35:22 +0200
-Subject: [PATCH 497/497] mtd: mtdconcat: add dt driver for concat devices
-
-Some mtd drivers like physmap variants have support for concatenating
-multiple mtd devices, but there is no generic way to define such a
-concat device from within the device tree.
-
-This is useful for some SoC boards that use multiple flash chips as
-memory banks of a single mtd device, with partitions spanning chip
-borders.
-
-This commit adds a driver for creating virtual mtd-concat devices. They
-must have a compatible = "mtd-concat" line, and define a list of devices
-to concat in the 'devices' property, for example:
-
-flash {
-  compatible = "mtd-concat";
-
-  devices = <&flash0 &flash1>;
-
-  partitions {
-    ...
-  };
-};
-
-The driver is added to the very end of the mtd Makefile to increase the
-likelyhood of all child devices already being loaded at the time of
-probing, preventing unnecessary deferred probes.
-
-Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
----
- drivers/mtd/Kconfig                 |   2 +
- drivers/mtd/Makefile                |   3 +
- drivers/mtd/composite/Kconfig       |  12 +++
- drivers/mtd/composite/Makefile      |   6 ++
- drivers/mtd/composite/virt_concat.c | 128 ++++++++++++++++++++++++++++
- 5 files changed, 151 insertions(+)
- create mode 100644 drivers/mtd/composite/Kconfig
- create mode 100644 drivers/mtd/composite/Makefile
- create mode 100644 drivers/mtd/composite/virt_concat.c
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -228,4 +228,6 @@ source "drivers/mtd/ubi/Kconfig"
- 
- source "drivers/mtd/hyperbus/Kconfig"
- 
-+source "drivers/mtd/composite/Kconfig"
-+
- endif # MTD
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -32,3 +32,6 @@ obj-y		+= chips/ lpddr/ maps/ devices/ n
- obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor/
- obj-$(CONFIG_MTD_UBI)		+= ubi/
- obj-$(CONFIG_MTD_HYPERBUS)	+= hyperbus/
-+
-+# Composite drivers must be loaded last
-+obj-y				+= composite/
---- /dev/null
-+++ b/drivers/mtd/composite/Kconfig
-@@ -0,0 +1,12 @@
-+menu "Composite MTD device drivers"
-+	depends on MTD!=n
-+
-+config MTD_VIRT_CONCAT
-+	tristate "Virtual concat MTD device"
-+	help
-+	  This driver allows creation of a virtual MTD concat device, which
-+	  concatenates multiple underlying MTD devices to a single device.
-+	  This is required by some SoC boards where multiple memory banks are
-+	  used as one device with partitions spanning across device boundaries.
-+
-+endmenu
---- /dev/null
-+++ b/drivers/mtd/composite/Makefile
-@@ -0,0 +1,6 @@
-+# SPDX-License-Identifier: GPL-2.0
-+#
-+# linux/drivers/mtd/composite/Makefile
-+#
-+
-+obj-$(CONFIG_MTD_VIRT_CONCAT)   += virt_concat.o
---- /dev/null
-+++ b/drivers/mtd/composite/virt_concat.c
-@@ -0,0 +1,128 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Virtual concat MTD device driver
-+ *
-+ * Copyright (C) 2018 Bernhard Frauendienst
-+ * Author: Bernhard Frauendienst, kernel@nospam.obeliks.de
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/mtd/concat.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+#include <linux/slab.h>
-+
-+/*
-+ * struct of_virt_concat - platform device driver data.
-+ * @cmtd the final mtd_concat device
-+ * @num_devices the number of devices in @devices
-+ * @devices points to an array of devices already loaded
-+ */
-+struct of_virt_concat {
-+	struct mtd_info	*cmtd;
-+	int num_devices;
-+	struct mtd_info	**devices;
-+};
-+
-+static int virt_concat_remove(struct platform_device *pdev)
-+{
-+	struct of_virt_concat *info;
-+	int i;
-+
-+	info = platform_get_drvdata(pdev);
-+	if (!info)
-+		return 0;
-+
-+	// unset data for when this is called after a probe error
-+	platform_set_drvdata(pdev, NULL);
-+
-+	if (info->cmtd) {
-+		mtd_device_unregister(info->cmtd);
-+		mtd_concat_destroy(info->cmtd);
-+	}
-+
-+	if (info->devices) {
-+		for (i = 0; i < info->num_devices; i++)
-+			put_mtd_device(info->devices[i]);
-+	}
-+
-+	return 0;
-+}
-+
-+static int virt_concat_probe(struct platform_device *pdev)
-+{
-+	struct device_node *node = pdev->dev.of_node;
-+	struct of_phandle_iterator it;
-+	struct of_virt_concat *info;
-+	struct mtd_info *mtd;
-+	int err = 0, count;
-+
-+	count = of_count_phandle_with_args(node, "devices", NULL);
-+	if (count <= 0)
-+		return -EINVAL;
-+
-+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
-+	if (!info)
-+		return -ENOMEM;
-+	info->devices = devm_kcalloc(&pdev->dev, count,
-+				     sizeof(*(info->devices)), GFP_KERNEL);
-+	if (!info->devices) {
-+		err = -ENOMEM;
-+		goto err_remove;
-+	}
-+
-+	platform_set_drvdata(pdev, info);
-+
-+	of_for_each_phandle(&it, err, node, "devices", NULL, 0) {
-+		mtd = get_mtd_device_by_node(it.node);
-+		if (IS_ERR(mtd)) {
-+			of_node_put(it.node);
-+			err = -EPROBE_DEFER;
-+			goto err_remove;
-+		}
-+
-+		info->devices[info->num_devices++] = mtd;
-+	}
-+
-+	info->cmtd = mtd_concat_create(info->devices, info->num_devices,
-+				       dev_name(&pdev->dev));
-+	if (!info->cmtd) {
-+		err = -ENXIO;
-+		goto err_remove;
-+	}
-+
-+	info->cmtd->dev.parent = &pdev->dev;
-+	mtd_set_of_node(info->cmtd, node);
-+	mtd_device_register(info->cmtd, NULL, 0);
-+
-+	return 0;
-+
-+err_remove:
-+	virt_concat_remove(pdev);
-+
-+	return err;
-+}
-+
-+static const struct of_device_id virt_concat_of_match[] = {
-+	{ .compatible = "mtd-concat", },
-+	{ /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, virt_concat_of_match);
-+
-+static struct platform_driver virt_concat_driver = {
-+	.probe = virt_concat_probe,
-+	.remove = virt_concat_remove,
-+	.driver	 = {
-+		.name   = "virt-mtdconcat",
-+		.of_match_table = virt_concat_of_match,
-+	},
-+};
-+
-+module_platform_driver(virt_concat_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Bernhard Frauendienst <kernel@nospam.obeliks.de>");
-+MODULE_DESCRIPTION("Virtual concat MTD device driver");
diff --git a/target/linux/generic/pending-5.4/498-mtd-mtdconcat-select-readwrite-function.patch b/target/linux/generic/pending-5.4/498-mtd-mtdconcat-select-readwrite-function.patch
deleted file mode 100644
index 129bbffd0f..0000000000
--- a/target/linux/generic/pending-5.4/498-mtd-mtdconcat-select-readwrite-function.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/mtd/mtdconcat.c
-+++ b/drivers/mtd/mtdconcat.c
-@@ -642,8 +642,12 @@ struct mtd_info *mtd_concat_create(struc
- 		concat->mtd._writev = concat_writev;
- 	if (subdev[0]->_read_oob)
- 		concat->mtd._read_oob = concat_read_oob;
-+	else
-+		concat->mtd._read = concat_read;
- 	if (subdev[0]->_write_oob)
- 		concat->mtd._write_oob = concat_write_oob;
-+	else
-+		concat->mtd._write = concat_write;
- 	if (subdev[0]->_block_isbad)
- 		concat->mtd._block_isbad = concat_block_isbad;
- 	if (subdev[0]->_block_markbad)
-@@ -701,8 +705,6 @@ struct mtd_info *mtd_concat_create(struc
- 	concat->mtd.name = name;
- 
- 	concat->mtd._erase = concat_erase;
--	concat->mtd._read = concat_read;
--	concat->mtd._write = concat_write;
- 	concat->mtd._sync = concat_sync;
- 	concat->mtd._lock = concat_lock;
- 	concat->mtd._unlock = concat_unlock;
diff --git a/target/linux/generic/pending-5.4/530-jffs2_make_lzma_available.patch b/target/linux/generic/pending-5.4/530-jffs2_make_lzma_available.patch
deleted file mode 100644
index 8bd31d2e7e..0000000000
--- a/target/linux/generic/pending-5.4/530-jffs2_make_lzma_available.patch
+++ /dev/null
@@ -1,5180 +0,0 @@
-From: Alexandros C. Couloumbis <alex@ozo.com>
-Subject: fs: add jffs2/lzma support (not activated by default yet)
-
-lede-commit: c2c88d315fa0e881f8b19da07b62859b915b11b2
-Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
----
- fs/jffs2/Kconfig             |    9 +
- fs/jffs2/Makefile            |    3 +
- fs/jffs2/compr.c             |    6 +
- fs/jffs2/compr.h             |   10 +-
- fs/jffs2/compr_lzma.c        |  128 +++
- fs/jffs2/super.c             |   33 +-
- include/linux/lzma.h         |   62 ++
- include/linux/lzma/LzFind.h  |  115 +++
- include/linux/lzma/LzHash.h  |   54 +
- include/linux/lzma/LzmaDec.h |  231 +++++
- include/linux/lzma/LzmaEnc.h |   80 ++
- include/linux/lzma/Types.h   |  226 +++++
- include/uapi/linux/jffs2.h   |    1 +
- lib/Kconfig                  |    6 +
- lib/Makefile                 |   12 +
- lib/lzma/LzFind.c            |  761 ++++++++++++++
- lib/lzma/LzmaDec.c           |  999 +++++++++++++++++++
- lib/lzma/LzmaEnc.c           | 2271 ++++++++++++++++++++++++++++++++++++++++++
- lib/lzma/Makefile            |    7 +
- 19 files changed, 5008 insertions(+), 6 deletions(-)
- create mode 100644 fs/jffs2/compr_lzma.c
- create mode 100644 include/linux/lzma.h
- create mode 100644 include/linux/lzma/LzFind.h
- create mode 100644 include/linux/lzma/LzHash.h
- create mode 100644 include/linux/lzma/LzmaDec.h
- create mode 100644 include/linux/lzma/LzmaEnc.h
- create mode 100644 include/linux/lzma/Types.h
- create mode 100644 lib/lzma/LzFind.c
- create mode 100644 lib/lzma/LzmaDec.c
- create mode 100644 lib/lzma/LzmaEnc.c
- create mode 100644 lib/lzma/Makefile
-
---- a/fs/jffs2/Kconfig
-+++ b/fs/jffs2/Kconfig
-@@ -136,6 +136,15 @@ config JFFS2_LZO
- 	  This feature was added in July, 2007. Say 'N' if you need
- 	  compatibility with older bootloaders or kernels.
- 
-+config JFFS2_LZMA
-+	bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS
-+	select LZMA_COMPRESS
-+	select LZMA_DECOMPRESS
-+	depends on JFFS2_FS
-+	default n
-+	help
-+	  JFFS2 wrapper to the LZMA C SDK
-+
- config JFFS2_RTIME
- 	bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
- 	depends on JFFS2_FS
---- a/fs/jffs2/Makefile
-+++ b/fs/jffs2/Makefile
-@@ -19,4 +19,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN)	+= compr_rub
- jffs2-$(CONFIG_JFFS2_RTIME)	+= compr_rtime.o
- jffs2-$(CONFIG_JFFS2_ZLIB)	+= compr_zlib.o
- jffs2-$(CONFIG_JFFS2_LZO)	+= compr_lzo.o
-+jffs2-$(CONFIG_JFFS2_LZMA)	+= compr_lzma.o
- jffs2-$(CONFIG_JFFS2_SUMMARY)   += summary.o
-+
-+CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma
---- a/fs/jffs2/compr.c
-+++ b/fs/jffs2/compr.c
-@@ -378,6 +378,9 @@ int __init jffs2_compressors_init(void)
- #ifdef CONFIG_JFFS2_LZO
- 	jffs2_lzo_init();
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+	jffs2_lzma_init();
-+#endif
- /* Setting default compression mode */
- #ifdef CONFIG_JFFS2_CMODE_NONE
- 	jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
-@@ -401,6 +404,9 @@ int __init jffs2_compressors_init(void)
- int jffs2_compressors_exit(void)
- {
- /* Unregistering compressors */
-+#ifdef CONFIG_JFFS2_LZMA
-+	jffs2_lzma_exit();
-+#endif
- #ifdef CONFIG_JFFS2_LZO
- 	jffs2_lzo_exit();
- #endif
---- a/fs/jffs2/compr.h
-+++ b/fs/jffs2/compr.h
-@@ -29,9 +29,9 @@
- #define JFFS2_DYNRUBIN_PRIORITY  20
- #define JFFS2_LZARI_PRIORITY     30
- #define JFFS2_RTIME_PRIORITY     50
--#define JFFS2_ZLIB_PRIORITY      60
--#define JFFS2_LZO_PRIORITY       80
--
-+#define JFFS2_LZMA_PRIORITY      70
-+#define JFFS2_ZLIB_PRIORITY      80
-+#define JFFS2_LZO_PRIORITY       90
- 
- #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
- #define JFFS2_DYNRUBIN_DISABLED  /*	   for decompression */
-@@ -101,5 +101,9 @@ void jffs2_zlib_exit(void);
- int jffs2_lzo_init(void);
- void jffs2_lzo_exit(void);
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+int jffs2_lzma_init(void);
-+void jffs2_lzma_exit(void);
-+#endif
- 
- #endif /* __JFFS2_COMPR_H__ */
---- /dev/null
-+++ b/fs/jffs2/compr_lzma.c
-@@ -0,0 +1,128 @@
-+/*
-+ * JFFS2 -- Journalling Flash File System, Version 2.
-+ *
-+ * For licensing information, see the file 'LICENCE' in this directory.
-+ *
-+ * JFFS2 wrapper to the LZMA C SDK
-+ *
-+ */
-+
-+#include <linux/lzma.h>
-+#include "compr.h"
-+
-+#ifdef __KERNEL__
-+	static DEFINE_MUTEX(deflate_mutex);
-+#endif
-+
-+CLzmaEncHandle *p;
-+Byte propsEncoded[LZMA_PROPS_SIZE];
-+SizeT propsSize = sizeof(propsEncoded);
-+
-+STATIC void lzma_free_workspace(void)
-+{
-+	LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc);
-+}
-+
-+STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props)
-+{
-+	if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL)
-+	{
-+		PRINT_ERROR("Failed to allocate lzma deflate workspace\n");
-+		return -ENOMEM;
-+	}
-+
-+	if (LzmaEnc_SetProps(p, props) != SZ_OK)
-+	{
-+		lzma_free_workspace();
-+		return -1;
-+	}
-+
-+	if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK)
-+	{
-+		lzma_free_workspace();
-+		return -1;
-+	}
-+
-+	return 0;
-+}
-+
-+STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out,
-+			      uint32_t *sourcelen, uint32_t *dstlen)
-+{
-+	SizeT compress_size = (SizeT)(*dstlen);
-+	int ret;
-+
-+	#ifdef __KERNEL__
-+		mutex_lock(&deflate_mutex);
-+	#endif
-+
-+	ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen,
-+		0, NULL, &lzma_alloc, &lzma_alloc);
-+
-+	#ifdef __KERNEL__
-+		mutex_unlock(&deflate_mutex);
-+	#endif
-+
-+	if (ret != SZ_OK)
-+		return -1;
-+
-+	*dstlen = (uint32_t)compress_size;
-+
-+	return 0;
-+}
-+
-+STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out,
-+				 uint32_t srclen, uint32_t destlen)
-+{
-+	int ret;
-+	SizeT dl = (SizeT)destlen;
-+	SizeT sl = (SizeT)srclen;
-+	ELzmaStatus status;
-+
-+	ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded,
-+		propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc);
-+
-+	if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen)
-+		return -1;
-+
-+	return 0;
-+}
-+
-+static struct jffs2_compressor jffs2_lzma_comp = {
-+	.priority = JFFS2_LZMA_PRIORITY,
-+	.name = "lzma",
-+	.compr = JFFS2_COMPR_LZMA,
-+	.compress = &jffs2_lzma_compress,
-+	.decompress = &jffs2_lzma_decompress,
-+	.disabled = 0,
-+};
-+
-+int INIT jffs2_lzma_init(void)
-+{
-+	int ret;
-+	CLzmaEncProps props;
-+	LzmaEncProps_Init(&props);
-+
-+	props.dictSize = LZMA_BEST_DICT(0x2000);
-+	props.level = LZMA_BEST_LEVEL;
-+	props.lc = LZMA_BEST_LC;
-+	props.lp = LZMA_BEST_LP;
-+	props.pb = LZMA_BEST_PB;
-+	props.fb = LZMA_BEST_FB;
-+
-+	ret = lzma_alloc_workspace(&props);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = jffs2_register_compressor(&jffs2_lzma_comp);
-+	if (ret)
-+		lzma_free_workspace();
-+
-+	return ret;
-+}
-+
-+void jffs2_lzma_exit(void)
-+{
-+	jffs2_unregister_compressor(&jffs2_lzma_comp);
-+	lzma_free_workspace();
-+}
---- a/fs/jffs2/super.c
-+++ b/fs/jffs2/super.c
-@@ -380,14 +380,41 @@ static int __init init_jffs2_fs(void)
- 	BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
- 	BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
- 
--	pr_info("version 2.2."
-+	pr_info("version 2.2"
- #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
- 	       " (NAND)"
- #endif
- #ifdef CONFIG_JFFS2_SUMMARY
--	       " (SUMMARY) "
-+	       " (SUMMARY)"
- #endif
--	       " © 2001-2006 Red Hat, Inc.\n");
-+#ifdef CONFIG_JFFS2_ZLIB
-+	       " (ZLIB)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZO
-+	       " (LZO)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZMA
-+	       " (LZMA)"
-+#endif
-+#ifdef CONFIG_JFFS2_RTIME
-+	       " (RTIME)"
-+#endif
-+#ifdef CONFIG_JFFS2_RUBIN
-+	       " (RUBIN)"
-+#endif
-+#ifdef  CONFIG_JFFS2_CMODE_NONE
-+	       " (CMODE_NONE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_PRIORITY
-+	       " (CMODE_PRIORITY)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_SIZE
-+	       " (CMODE_SIZE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
-+	       " (CMODE_FAVOURLZO)"
-+#endif
-+	       " (c) 2001-2006 Red Hat, Inc.\n");
- 
- 	jffs2_inode_cachep = kmem_cache_create("jffs2_i",
- 					     sizeof(struct jffs2_inode_info),
---- /dev/null
-+++ b/include/linux/lzma.h
-@@ -0,0 +1,62 @@
-+#ifndef __LZMA_H__
-+#define __LZMA_H__
-+
-+#ifdef __KERNEL__
-+	#include <linux/kernel.h>
-+	#include <linux/sched.h>
-+	#include <linux/slab.h>
-+	#include <linux/vmalloc.h>
-+	#include <linux/init.h>
-+	#define LZMA_MALLOC vmalloc
-+	#define LZMA_FREE vfree
-+	#define PRINT_ERROR(msg) printk(KERN_WARNING #msg)
-+	#define INIT __init
-+	#define STATIC static
-+#else
-+	#include <stdint.h>
-+	#include <stdlib.h>
-+	#include <stdio.h>
-+	#include <unistd.h>
-+	#include <string.h>
-+	#include <asm/types.h>
-+	#include <errno.h>
-+	#include <linux/jffs2.h>
-+	#ifndef PAGE_SIZE
-+		extern int page_size;
-+		#define PAGE_SIZE page_size
-+	#endif
-+	#define LZMA_MALLOC malloc
-+	#define LZMA_FREE free
-+	#define PRINT_ERROR(msg) fprintf(stderr, msg)
-+	#define INIT
-+	#define STATIC
-+#endif
-+
-+#include "lzma/LzmaDec.h"
-+#include "lzma/LzmaEnc.h"
-+
-+#define LZMA_BEST_LEVEL (9)
-+#define LZMA_BEST_LC    (0)
-+#define LZMA_BEST_LP    (0)
-+#define LZMA_BEST_PB    (0)
-+#define LZMA_BEST_FB  (273)
-+
-+#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2)
-+
-+static void *p_lzma_malloc(void *p, size_t size)
-+{
-+	if (size == 0)
-+		return NULL;
-+
-+	return LZMA_MALLOC(size);
-+}
-+
-+static void p_lzma_free(void *p, void *address)
-+{
-+	if (address != NULL)
-+		LZMA_FREE(address);
-+}
-+
-+static ISzAlloc lzma_alloc = { .Alloc = p_lzma_malloc, .Free = p_lzma_free };
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzFind.h
-@@ -0,0 +1,115 @@
-+/* LzFind.h -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_FIND_H
-+#define __LZ_FIND_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+typedef UInt32 CLzRef;
-+
-+typedef struct _CMatchFinder
-+{
-+  Byte *buffer;
-+  UInt32 pos;
-+  UInt32 posLimit;
-+  UInt32 streamPos;
-+  UInt32 lenLimit;
-+
-+  UInt32 cyclicBufferPos;
-+  UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */
-+
-+  UInt32 matchMaxLen;
-+  CLzRef *hash;
-+  CLzRef *son;
-+  UInt32 hashMask;
-+  UInt32 cutValue;
-+
-+  Byte *bufferBase;
-+  ISeqInStream *stream;
-+  int streamEndWasReached;
-+
-+  UInt32 blockSize;
-+  UInt32 keepSizeBefore;
-+  UInt32 keepSizeAfter;
-+
-+  UInt32 numHashBytes;
-+  int directInput;
-+  size_t directInputRem;
-+  int btMode;
-+  int bigHash;
-+  UInt32 historySize;
-+  UInt32 fixedHashSize;
-+  UInt32 hashSizeSum;
-+  UInt32 numSons;
-+  SRes result;
-+  UInt32 crc[256];
-+} CMatchFinder;
-+
-+#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer)
-+#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)])
-+
-+#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
-+
-+int MatchFinder_NeedMove(CMatchFinder *p);
-+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
-+void MatchFinder_MoveBlock(CMatchFinder *p);
-+void MatchFinder_ReadIfRequired(CMatchFinder *p);
-+
-+void MatchFinder_Construct(CMatchFinder *p);
-+
-+/* Conditions:
-+     historySize <= 3 GB
-+     keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB
-+*/
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+    ISzAlloc *alloc);
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
-+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
-+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
-+
-+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
-+    UInt32 *distances, UInt32 maxLen);
-+
-+/*
-+Conditions:
-+  Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func.
-+  Mf_GetPointerToCurrentPos_Func's result must be used only before any other function
-+*/
-+
-+typedef void (*Mf_Init_Func)(void *object);
-+typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index);
-+typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object);
-+typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object);
-+typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances);
-+typedef void (*Mf_Skip_Func)(void *object, UInt32);
-+
-+typedef struct _IMatchFinder
-+{
-+  Mf_Init_Func Init;
-+  Mf_GetIndexByte_Func GetIndexByte;
-+  Mf_GetNumAvailableBytes_Func GetNumAvailableBytes;
-+  Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos;
-+  Mf_GetMatches_Func GetMatches;
-+  Mf_Skip_Func Skip;
-+} IMatchFinder;
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
-+
-+void MatchFinder_Init(CMatchFinder *p);
-+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzHash.h
-@@ -0,0 +1,54 @@
-+/* LzHash.h -- HASH functions for LZ algorithms
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_HASH_H
-+#define __LZ_HASH_H
-+
-+#define kHash2Size (1 << 10)
-+#define kHash3Size (1 << 16)
-+#define kHash4Size (1 << 20)
-+
-+#define kFix3HashSize (kHash2Size)
-+#define kFix4HashSize (kHash2Size + kHash3Size)
-+#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size)
-+
-+#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8);
-+
-+#define HASH3_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; }
-+
-+#define HASH4_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; }
-+
-+#define HASH5_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \
-+  hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \
-+  hash4Value &= (kHash4Size - 1); }
-+
-+/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */
-+#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF;
-+
-+
-+#define MT_HASH2_CALC \
-+  hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1);
-+
-+#define MT_HASH3_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); }
-+
-+#define MT_HASH4_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaDec.h
-@@ -0,0 +1,231 @@
-+/* LzmaDec.h -- LZMA Decoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_DEC_H
-+#define __LZMA_DEC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/* #define _LZMA_PROB32 */
-+/* _LZMA_PROB32 can increase the speed on some CPUs,
-+   but memory usage for CLzmaDec::probs will be doubled in that case */
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+
-+/* ---------- LZMA Properties ---------- */
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaProps
-+{
-+  unsigned lc, lp, pb;
-+  UInt32 dicSize;
-+} CLzmaProps;
-+
-+/* LzmaProps_Decode - decodes properties
-+Returns:
-+  SZ_OK
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+*/
-+
-+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
-+
-+
-+/* ---------- LZMA Decoder state ---------- */
-+
-+/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
-+   Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
-+
-+#define LZMA_REQUIRED_INPUT_MAX 20
-+
-+typedef struct
-+{
-+  CLzmaProps prop;
-+  CLzmaProb *probs;
-+  Byte *dic;
-+  const Byte *buf;
-+  UInt32 range, code;
-+  SizeT dicPos;
-+  SizeT dicBufSize;
-+  UInt32 processedPos;
-+  UInt32 checkDicSize;
-+  unsigned state;
-+  UInt32 reps[4];
-+  unsigned remainLen;
-+  int needFlush;
-+  int needInitState;
-+  UInt32 numProbs;
-+  unsigned tempBufSize;
-+  Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
-+} CLzmaDec;
-+
-+#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
-+
-+void LzmaDec_Init(CLzmaDec *p);
-+
-+/* There are two types of LZMA streams:
-+     0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
-+     1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
-+
-+typedef enum
-+{
-+  LZMA_FINISH_ANY,   /* finish at any point */
-+  LZMA_FINISH_END    /* block must be finished at the end */
-+} ELzmaFinishMode;
-+
-+/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
-+
-+   You must use LZMA_FINISH_END, when you know that current output buffer
-+   covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
-+
-+   If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
-+   and output value of destLen will be less than output buffer size limit.
-+   You can check status result also.
-+
-+   You can use multiple checks to test data integrity after full decompression:
-+     1) Check Result and "status" variable.
-+     2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
-+     3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
-+        You must use correct finish mode in that case. */
-+
-+typedef enum
-+{
-+  LZMA_STATUS_NOT_SPECIFIED,               /* use main error code instead */
-+  LZMA_STATUS_FINISHED_WITH_MARK,          /* stream was finished with end mark. */
-+  LZMA_STATUS_NOT_FINISHED,                /* stream was not finished */
-+  LZMA_STATUS_NEEDS_MORE_INPUT,            /* you must provide more input bytes */
-+  LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK  /* there is probability that stream was finished without end mark */
-+} ELzmaStatus;
-+
-+/* ELzmaStatus is used only as output value for function call */
-+
-+
-+/* ---------- Interfaces ---------- */
-+
-+/* There are 3 levels of interfaces:
-+     1) Dictionary Interface
-+     2) Buffer Interface
-+     3) One Call Interface
-+   You can select any of these interfaces, but don't mix functions from different
-+   groups for same object. */
-+
-+
-+/* There are two variants to allocate state for Dictionary Interface:
-+     1) LzmaDec_Allocate / LzmaDec_Free
-+     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
-+   You can use variant 2, if you set dictionary buffer manually.
-+   For Buffer Interface you must always use variant 1.
-+
-+LzmaDec_Allocate* can return:
-+  SZ_OK
-+  SZ_ERROR_MEM         - Memory allocation error
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+*/
-+
-+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
-+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
-+
-+SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
-+void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
-+
-+/* ---------- Dictionary Interface ---------- */
-+
-+/* You can use it, if you want to eliminate the overhead for data copying from
-+   dictionary to some other external buffer.
-+   You must work with CLzmaDec variables directly in this interface.
-+
-+   STEPS:
-+     LzmaDec_Constr()
-+     LzmaDec_Allocate()
-+     for (each new stream)
-+     {
-+       LzmaDec_Init()
-+       while (it needs more decompression)
-+       {
-+         LzmaDec_DecodeToDic()
-+         use data from CLzmaDec::dic and update CLzmaDec::dicPos
-+       }
-+     }
-+     LzmaDec_Free()
-+*/
-+
-+/* LzmaDec_DecodeToDic
-+
-+   The decoding to internal dictionary buffer (CLzmaDec::dic).
-+   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (dicLimit).
-+  LZMA_FINISH_ANY - Decode just dicLimit bytes.
-+  LZMA_FINISH_END - Stream must be finished after dicLimit.
-+
-+Returns:
-+  SZ_OK
-+    status:
-+      LZMA_STATUS_FINISHED_WITH_MARK
-+      LZMA_STATUS_NOT_FINISHED
-+      LZMA_STATUS_NEEDS_MORE_INPUT
-+      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-+  SZ_ERROR_DATA - Data error
-+*/
-+
-+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
-+    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-+
-+
-+/* ---------- Buffer Interface ---------- */
-+
-+/* It's zlib-like interface.
-+   See LzmaDec_DecodeToDic description for information about STEPS and return results,
-+   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
-+   to work with CLzmaDec variables manually.
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (*destLen).
-+  LZMA_FINISH_ANY - Decode just destLen bytes.
-+  LZMA_FINISH_END - Stream must be finished after (*destLen).
-+*/
-+
-+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
-+    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-+
-+
-+/* ---------- One Call Interface ---------- */
-+
-+/* LzmaDecode
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (*destLen).
-+  LZMA_FINISH_ANY - Decode just destLen bytes.
-+  LZMA_FINISH_END - Stream must be finished after (*destLen).
-+
-+Returns:
-+  SZ_OK
-+    status:
-+      LZMA_STATUS_FINISHED_WITH_MARK
-+      LZMA_STATUS_NOT_FINISHED
-+      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-+  SZ_ERROR_DATA - Data error
-+  SZ_ERROR_MEM  - Memory allocation error
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+  SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
-+*/
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+    ELzmaStatus *status, ISzAlloc *alloc);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaEnc.h
-@@ -0,0 +1,80 @@
-+/*  LzmaEnc.h -- LZMA Encoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_ENC_H
-+#define __LZMA_ENC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaEncProps
-+{
-+  int level;       /*  0 <= level <= 9 */
-+  UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version
-+                      (1 << 12) <= dictSize <= (1 << 30) for 64-bit version
-+                       default = (1 << 24) */
-+  int lc;          /* 0 <= lc <= 8, default = 3 */
-+  int lp;          /* 0 <= lp <= 4, default = 0 */
-+  int pb;          /* 0 <= pb <= 4, default = 2 */
-+  int algo;        /* 0 - fast, 1 - normal, default = 1 */
-+  int fb;          /* 5 <= fb <= 273, default = 32 */
-+  int btMode;      /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */
-+  int numHashBytes; /* 2, 3 or 4, default = 4 */
-+  UInt32 mc;        /* 1 <= mc <= (1 << 30), default = 32 */
-+  unsigned writeEndMark;  /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */
-+  int numThreads;  /* 1 or 2, default = 2 */
-+} CLzmaEncProps;
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p);
-+void LzmaEncProps_Normalize(CLzmaEncProps *p);
-+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
-+
-+
-+/* ---------- CLzmaEncHandle Interface ---------- */
-+
-+/* LzmaEnc_* functions can return the following exit codes:
-+Returns:
-+  SZ_OK           - OK
-+  SZ_ERROR_MEM    - Memory allocation error
-+  SZ_ERROR_PARAM  - Incorrect paramater in props
-+  SZ_ERROR_WRITE  - Write callback error.
-+  SZ_ERROR_PROGRESS - some break from progress callback
-+  SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
-+*/
-+
-+typedef void * CLzmaEncHandle;
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc);
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
-+SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
-+SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
-+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+
-+/* ---------- One Call Interface ---------- */
-+
-+/* LzmaEncode
-+Return code:
-+  SZ_OK               - OK
-+  SZ_ERROR_MEM        - Memory allocation error
-+  SZ_ERROR_PARAM      - Incorrect paramater
-+  SZ_ERROR_OUTPUT_EOF - output buffer overflow
-+  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
-+*/
-+
-+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/Types.h
-@@ -0,0 +1,226 @@
-+/* Types.h -- Basic types
-+2009-11-23 : Igor Pavlov : Public domain */
-+
-+#ifndef __7Z_TYPES_H
-+#define __7Z_TYPES_H
-+
-+#include <stddef.h>
-+
-+#ifdef _WIN32
-+#include <windows.h>
-+#endif
-+
-+#ifndef EXTERN_C_BEGIN
-+#ifdef __cplusplus
-+#define EXTERN_C_BEGIN extern "C" {
-+#define EXTERN_C_END }
-+#else
-+#define EXTERN_C_BEGIN
-+#define EXTERN_C_END
-+#endif
-+#endif
-+
-+EXTERN_C_BEGIN
-+
-+#define SZ_OK 0
-+
-+#define SZ_ERROR_DATA 1
-+#define SZ_ERROR_MEM 2
-+#define SZ_ERROR_CRC 3
-+#define SZ_ERROR_UNSUPPORTED 4
-+#define SZ_ERROR_PARAM 5
-+#define SZ_ERROR_INPUT_EOF 6
-+#define SZ_ERROR_OUTPUT_EOF 7
-+#define SZ_ERROR_READ 8
-+#define SZ_ERROR_WRITE 9
-+#define SZ_ERROR_PROGRESS 10
-+#define SZ_ERROR_FAIL 11
-+#define SZ_ERROR_THREAD 12
-+
-+#define SZ_ERROR_ARCHIVE 16
-+#define SZ_ERROR_NO_ARCHIVE 17
-+
-+typedef int SRes;
-+
-+#ifdef _WIN32
-+typedef DWORD WRes;
-+#else
-+typedef int WRes;
-+#endif
-+
-+#ifndef RINOK
-+#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
-+#endif
-+
-+typedef unsigned char Byte;
-+typedef short Int16;
-+typedef unsigned short UInt16;
-+
-+#ifdef _LZMA_UINT32_IS_ULONG
-+typedef long Int32;
-+typedef unsigned long UInt32;
-+#else
-+typedef int Int32;
-+typedef unsigned int UInt32;
-+#endif
-+
-+#ifdef _SZ_NO_INT_64
-+
-+/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
-+   NOTES: Some code will work incorrectly in that case! */
-+
-+typedef long Int64;
-+typedef unsigned long UInt64;
-+
-+#else
-+
-+#if defined(_MSC_VER) || defined(__BORLANDC__)
-+typedef __int64 Int64;
-+typedef unsigned __int64 UInt64;
-+#else
-+typedef long long int Int64;
-+typedef unsigned long long int UInt64;
-+#endif
-+
-+#endif
-+
-+#ifdef _LZMA_NO_SYSTEM_SIZE_T
-+typedef UInt32 SizeT;
-+#else
-+typedef size_t SizeT;
-+#endif
-+
-+typedef int Bool;
-+#define True 1
-+#define False 0
-+
-+
-+#ifdef _WIN32
-+#define MY_STD_CALL __stdcall
-+#else
-+#define MY_STD_CALL
-+#endif
-+
-+#ifdef _MSC_VER
-+
-+#if _MSC_VER >= 1300
-+#define MY_NO_INLINE __declspec(noinline)
-+#else
-+#define MY_NO_INLINE
-+#endif
-+
-+#define MY_CDECL __cdecl
-+#define MY_FAST_CALL __fastcall
-+
-+#else
-+
-+#define MY_CDECL
-+#define MY_FAST_CALL
-+
-+#endif
-+
-+
-+/* The following interfaces use first parameter as pointer to structure */
-+
-+typedef struct
-+{
-+  SRes (*Read)(void *p, void *buf, size_t *size);
-+    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+       (output(*size) < input(*size)) is allowed */
-+} ISeqInStream;
-+
-+/* it can return SZ_ERROR_INPUT_EOF */
-+SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
-+SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
-+
-+typedef struct
-+{
-+  size_t (*Write)(void *p, const void *buf, size_t size);
-+    /* Returns: result - the number of actually written bytes.
-+       (result < size) means error */
-+} ISeqOutStream;
-+
-+typedef enum
-+{
-+  SZ_SEEK_SET = 0,
-+  SZ_SEEK_CUR = 1,
-+  SZ_SEEK_END = 2
-+} ESzSeek;
-+
-+typedef struct
-+{
-+  SRes (*Read)(void *p, void *buf, size_t *size);  /* same as ISeqInStream::Read */
-+  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ISeekInStream;
-+
-+typedef struct
-+{
-+  SRes (*Look)(void *p, void **buf, size_t *size);
-+    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+       (output(*size) > input(*size)) is not allowed
-+       (output(*size) < input(*size)) is allowed */
-+  SRes (*Skip)(void *p, size_t offset);
-+    /* offset must be <= output(*size) of Look */
-+
-+  SRes (*Read)(void *p, void *buf, size_t *size);
-+    /* reads directly (without buffer). It's same as ISeqInStream::Read */
-+  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ILookInStream;
-+
-+SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
-+SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
-+
-+/* reads via ILookInStream::Read */
-+SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
-+
-+#define LookToRead_BUF_SIZE (1 << 14)
-+
-+typedef struct
-+{
-+  ILookInStream s;
-+  ISeekInStream *realStream;
-+  size_t pos;
-+  size_t size;
-+  Byte buf[LookToRead_BUF_SIZE];
-+} CLookToRead;
-+
-+void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
-+void LookToRead_Init(CLookToRead *p);
-+
-+typedef struct
-+{
-+  ISeqInStream s;
-+  ILookInStream *realStream;
-+} CSecToLook;
-+
-+void SecToLook_CreateVTable(CSecToLook *p);
-+
-+typedef struct
-+{
-+  ISeqInStream s;
-+  ILookInStream *realStream;
-+} CSecToRead;
-+
-+void SecToRead_CreateVTable(CSecToRead *p);
-+
-+typedef struct
-+{
-+  SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
-+    /* Returns: result. (result != SZ_OK) means break.
-+       Value (UInt64)(Int64)-1 for size means unknown value. */
-+} ICompressProgress;
-+
-+typedef struct
-+{
-+  void *(*Alloc)(void *p, size_t size);
-+  void (*Free)(void *p, void *address); /* address can be 0 */
-+} ISzAlloc;
-+
-+#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
-+#define IAlloc_Free(p, a) (p)->Free((p), a)
-+
-+EXTERN_C_END
-+
-+#endif
---- a/include/uapi/linux/jffs2.h
-+++ b/include/uapi/linux/jffs2.h
-@@ -46,6 +46,7 @@
- #define JFFS2_COMPR_DYNRUBIN	0x05
- #define JFFS2_COMPR_ZLIB	0x06
- #define JFFS2_COMPR_LZO		0x07
-+#define JFFS2_COMPR_LZMA	0x08
- /* Compatibility flags. */
- #define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
- #define JFFS2_NODE_ACCURATE 0x2000
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -303,6 +303,12 @@ config ZSTD_DECOMPRESS
- 
- source "lib/xz/Kconfig"
- 
-+config LZMA_COMPRESS
-+    tristate
-+
-+config LZMA_DECOMPRESS
-+    tristate
-+
- #
- # These all provide a common interface (hence the apparent duplication with
- # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
---- a/lib/Makefile
-+++ b/lib/Makefile
-@@ -3,6 +3,16 @@
- # Makefile for some libs needed in the kernel.
- #
- 
-+ifdef CONFIG_JFFS2_ZLIB
-+	CONFIG_ZLIB_INFLATE:=y
-+	CONFIG_ZLIB_DEFLATE:=y
-+endif
-+
-+ifdef CONFIG_JFFS2_LZMA
-+	CONFIG_LZMA_DECOMPRESS:=y
-+	CONFIG_LZMA_COMPRESS:=y
-+endif
-+
- ifdef CONFIG_FUNCTION_TRACER
- ORIG_CFLAGS := $(KBUILD_CFLAGS)
- KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))
-@@ -149,6 +159,8 @@ obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
- obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/
- obj-$(CONFIG_XZ_DEC) += xz/
- obj-$(CONFIG_RAID6_PQ) += raid6/
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma/
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
- 
- lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
- lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
---- /dev/null
-+++ b/lib/lzma/LzFind.c
-@@ -0,0 +1,761 @@
-+/* LzFind.c -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+#include "LzFind.h"
-+#include "LzHash.h"
-+
-+#define kEmptyHashValue 0
-+#define kMaxValForNormalize ((UInt32)0xFFFFFFFF)
-+#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */
-+#define kNormalizeMask (~(kNormalizeStepMin - 1))
-+#define kMaxHistorySize ((UInt32)3 << 30)
-+
-+#define kStartMaxLen 3
-+
-+static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  if (!p->directInput)
-+  {
-+    alloc->Free(alloc, p->bufferBase);
-+    p->bufferBase = 0;
-+  }
-+}
-+
-+/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */
-+
-+static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
-+{
-+  UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
-+  if (p->directInput)
-+  {
-+    p->blockSize = blockSize;
-+    return 1;
-+  }
-+  if (p->bufferBase == 0 || p->blockSize != blockSize)
-+  {
-+    LzInWindow_Free(p, alloc);
-+    p->blockSize = blockSize;
-+    p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize);
-+  }
-+  return (p->bufferBase != 0);
-+}
-+
-+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
-+Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-+
-+UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-+
-+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
-+{
-+  p->posLimit -= subValue;
-+  p->pos -= subValue;
-+  p->streamPos -= subValue;
-+}
-+
-+static void MatchFinder_ReadBlock(CMatchFinder *p)
-+{
-+  if (p->streamEndWasReached || p->result != SZ_OK)
-+    return;
-+  if (p->directInput)
-+  {
-+    UInt32 curSize = 0xFFFFFFFF - p->streamPos;
-+    if (curSize > p->directInputRem)
-+      curSize = (UInt32)p->directInputRem;
-+    p->directInputRem -= curSize;
-+    p->streamPos += curSize;
-+    if (p->directInputRem == 0)
-+      p->streamEndWasReached = 1;
-+    return;
-+  }
-+  for (;;)
-+  {
-+    Byte *dest = p->buffer + (p->streamPos - p->pos);
-+    size_t size = (p->bufferBase + p->blockSize - dest);
-+    if (size == 0)
-+      return;
-+    p->result = p->stream->Read(p->stream, dest, &size);
-+    if (p->result != SZ_OK)
-+      return;
-+    if (size == 0)
-+    {
-+      p->streamEndWasReached = 1;
-+      return;
-+    }
-+    p->streamPos += (UInt32)size;
-+    if (p->streamPos - p->pos > p->keepSizeAfter)
-+      return;
-+  }
-+}
-+
-+void MatchFinder_MoveBlock(CMatchFinder *p)
-+{
-+  memmove(p->bufferBase,
-+    p->buffer - p->keepSizeBefore,
-+    (size_t)(p->streamPos - p->pos + p->keepSizeBefore));
-+  p->buffer = p->bufferBase + p->keepSizeBefore;
-+}
-+
-+int MatchFinder_NeedMove(CMatchFinder *p)
-+{
-+  if (p->directInput)
-+    return 0;
-+  /* if (p->streamEndWasReached) return 0; */
-+  return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
-+}
-+
-+void MatchFinder_ReadIfRequired(CMatchFinder *p)
-+{
-+  if (p->streamEndWasReached)
-+    return;
-+  if (p->keepSizeAfter >= p->streamPos - p->pos)
-+    MatchFinder_ReadBlock(p);
-+}
-+
-+static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
-+{
-+  if (MatchFinder_NeedMove(p))
-+    MatchFinder_MoveBlock(p);
-+  MatchFinder_ReadBlock(p);
-+}
-+
-+static void MatchFinder_SetDefaultSettings(CMatchFinder *p)
-+{
-+  p->cutValue = 32;
-+  p->btMode = 1;
-+  p->numHashBytes = 4;
-+  p->bigHash = 0;
-+}
-+
-+#define kCrcPoly 0xEDB88320
-+
-+void MatchFinder_Construct(CMatchFinder *p)
-+{
-+  UInt32 i;
-+  p->bufferBase = 0;
-+  p->directInput = 0;
-+  p->hash = 0;
-+  MatchFinder_SetDefaultSettings(p);
-+
-+  for (i = 0; i < 256; i++)
-+  {
-+    UInt32 r = i;
-+    int j;
-+    for (j = 0; j < 8; j++)
-+      r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
-+    p->crc[i] = r;
-+  }
-+}
-+
-+static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->hash);
-+  p->hash = 0;
-+}
-+
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  MatchFinder_FreeThisClassMemory(p, alloc);
-+  LzInWindow_Free(p, alloc);
-+}
-+
-+static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc)
-+{
-+  size_t sizeInBytes = (size_t)num * sizeof(CLzRef);
-+  if (sizeInBytes / sizeof(CLzRef) != num)
-+    return 0;
-+  return (CLzRef *)alloc->Alloc(alloc, sizeInBytes);
-+}
-+
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+    ISzAlloc *alloc)
-+{
-+  UInt32 sizeReserv;
-+  if (historySize > kMaxHistorySize)
-+  {
-+    MatchFinder_Free(p, alloc);
-+    return 0;
-+  }
-+  sizeReserv = historySize >> 1;
-+  if (historySize > ((UInt32)2 << 30))
-+    sizeReserv = historySize >> 2;
-+  sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19);
-+
-+  p->keepSizeBefore = historySize + keepAddBufferBefore + 1;
-+  p->keepSizeAfter = matchMaxLen + keepAddBufferAfter;
-+  /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */
-+  if (LzInWindow_Create(p, sizeReserv, alloc))
-+  {
-+    UInt32 newCyclicBufferSize = historySize + 1;
-+    UInt32 hs;
-+    p->matchMaxLen = matchMaxLen;
-+    {
-+      p->fixedHashSize = 0;
-+      if (p->numHashBytes == 2)
-+        hs = (1 << 16) - 1;
-+      else
-+      {
-+        hs = historySize - 1;
-+        hs |= (hs >> 1);
-+        hs |= (hs >> 2);
-+        hs |= (hs >> 4);
-+        hs |= (hs >> 8);
-+        hs >>= 1;
-+        hs |= 0xFFFF; /* don't change it! It's required for Deflate */
-+        if (hs > (1 << 24))
-+        {
-+          if (p->numHashBytes == 3)
-+            hs = (1 << 24) - 1;
-+          else
-+            hs >>= 1;
-+        }
-+      }
-+      p->hashMask = hs;
-+      hs++;
-+      if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size;
-+      if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size;
-+      if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size;
-+      hs += p->fixedHashSize;
-+    }
-+
-+    {
-+      UInt32 prevSize = p->hashSizeSum + p->numSons;
-+      UInt32 newSize;
-+      p->historySize = historySize;
-+      p->hashSizeSum = hs;
-+      p->cyclicBufferSize = newCyclicBufferSize;
-+      p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize);
-+      newSize = p->hashSizeSum + p->numSons;
-+      if (p->hash != 0 && prevSize == newSize)
-+        return 1;
-+      MatchFinder_FreeThisClassMemory(p, alloc);
-+      p->hash = AllocRefs(newSize, alloc);
-+      if (p->hash != 0)
-+      {
-+        p->son = p->hash + p->hashSizeSum;
-+        return 1;
-+      }
-+    }
-+  }
-+  MatchFinder_Free(p, alloc);
-+  return 0;
-+}
-+
-+static void MatchFinder_SetLimits(CMatchFinder *p)
-+{
-+  UInt32 limit = kMaxValForNormalize - p->pos;
-+  UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos;
-+  if (limit2 < limit)
-+    limit = limit2;
-+  limit2 = p->streamPos - p->pos;
-+  if (limit2 <= p->keepSizeAfter)
-+  {
-+    if (limit2 > 0)
-+      limit2 = 1;
-+  }
-+  else
-+    limit2 -= p->keepSizeAfter;
-+  if (limit2 < limit)
-+    limit = limit2;
-+  {
-+    UInt32 lenLimit = p->streamPos - p->pos;
-+    if (lenLimit > p->matchMaxLen)
-+      lenLimit = p->matchMaxLen;
-+    p->lenLimit = lenLimit;
-+  }
-+  p->posLimit = p->pos + limit;
-+}
-+
-+void MatchFinder_Init(CMatchFinder *p)
-+{
-+  UInt32 i;
-+  for (i = 0; i < p->hashSizeSum; i++)
-+    p->hash[i] = kEmptyHashValue;
-+  p->cyclicBufferPos = 0;
-+  p->buffer = p->bufferBase;
-+  p->pos = p->streamPos = p->cyclicBufferSize;
-+  p->result = SZ_OK;
-+  p->streamEndWasReached = 0;
-+  MatchFinder_ReadBlock(p);
-+  MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 MatchFinder_GetSubValue(CMatchFinder *p)
-+{
-+  return (p->pos - p->historySize - 1) & kNormalizeMask;
-+}
-+
-+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
-+{
-+  UInt32 i;
-+  for (i = 0; i < numItems; i++)
-+  {
-+    UInt32 value = items[i];
-+    if (value <= subValue)
-+      value = kEmptyHashValue;
-+    else
-+      value -= subValue;
-+    items[i] = value;
-+  }
-+}
-+
-+static void MatchFinder_Normalize(CMatchFinder *p)
-+{
-+  UInt32 subValue = MatchFinder_GetSubValue(p);
-+  MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons);
-+  MatchFinder_ReduceOffsets(p, subValue);
-+}
-+
-+static void MatchFinder_CheckLimits(CMatchFinder *p)
-+{
-+  if (p->pos == kMaxValForNormalize)
-+    MatchFinder_Normalize(p);
-+  if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos)
-+    MatchFinder_CheckAndMoveAndRead(p);
-+  if (p->cyclicBufferPos == p->cyclicBufferSize)
-+    p->cyclicBufferPos = 0;
-+  MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-+    UInt32 *distances, UInt32 maxLen)
-+{
-+  son[_cyclicBufferPos] = curMatch;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+      return distances;
-+    {
-+      const Byte *pb = cur - delta;
-+      curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
-+      if (pb[maxLen] == cur[maxLen] && *pb == *cur)
-+      {
-+        UInt32 len = 0;
-+        while (++len != lenLimit)
-+          if (pb[len] != cur[len])
-+            break;
-+        if (maxLen < len)
-+        {
-+          *distances++ = maxLen = len;
-+          *distances++ = delta - 1;
-+          if (len == lenLimit)
-+            return distances;
-+        }
-+      }
-+    }
-+  }
-+}
-+
-+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-+    UInt32 *distances, UInt32 maxLen)
-+{
-+  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+  UInt32 len0 = 0, len1 = 0;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+    {
-+      *ptr0 = *ptr1 = kEmptyHashValue;
-+      return distances;
-+    }
-+    {
-+      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+      const Byte *pb = cur - delta;
-+      UInt32 len = (len0 < len1 ? len0 : len1);
-+      if (pb[len] == cur[len])
-+      {
-+        if (++len != lenLimit && pb[len] == cur[len])
-+          while (++len != lenLimit)
-+            if (pb[len] != cur[len])
-+              break;
-+        if (maxLen < len)
-+        {
-+          *distances++ = maxLen = len;
-+          *distances++ = delta - 1;
-+          if (len == lenLimit)
-+          {
-+            *ptr1 = pair[0];
-+            *ptr0 = pair[1];
-+            return distances;
-+          }
-+        }
-+      }
-+      if (pb[len] < cur[len])
-+      {
-+        *ptr1 = curMatch;
-+        ptr1 = pair + 1;
-+        curMatch = *ptr1;
-+        len1 = len;
-+      }
-+      else
-+      {
-+        *ptr0 = curMatch;
-+        ptr0 = pair;
-+        curMatch = *ptr0;
-+        len0 = len;
-+      }
-+    }
-+  }
-+}
-+
-+static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue)
-+{
-+  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+  UInt32 len0 = 0, len1 = 0;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+    {
-+      *ptr0 = *ptr1 = kEmptyHashValue;
-+      return;
-+    }
-+    {
-+      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+      const Byte *pb = cur - delta;
-+      UInt32 len = (len0 < len1 ? len0 : len1);
-+      if (pb[len] == cur[len])
-+      {
-+        while (++len != lenLimit)
-+          if (pb[len] != cur[len])
-+            break;
-+        {
-+          if (len == lenLimit)
-+          {
-+            *ptr1 = pair[0];
-+            *ptr0 = pair[1];
-+            return;
-+          }
-+        }
-+      }
-+      if (pb[len] < cur[len])
-+      {
-+        *ptr1 = curMatch;
-+        ptr1 = pair + 1;
-+        curMatch = *ptr1;
-+        len1 = len;
-+      }
-+      else
-+      {
-+        *ptr0 = curMatch;
-+        ptr0 = pair;
-+        curMatch = *ptr0;
-+        len0 = len;
-+      }
-+    }
-+  }
-+}
-+
-+#define MOVE_POS \
-+  ++p->cyclicBufferPos; \
-+  p->buffer++; \
-+  if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
-+
-+#define MOVE_POS_RET MOVE_POS return offset;
-+
-+static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
-+
-+#define GET_MATCHES_HEADER2(minLen, ret_op) \
-+  UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
-+  lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
-+  cur = p->buffer;
-+
-+#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0)
-+#define SKIP_HEADER(minLen)        GET_MATCHES_HEADER2(minLen, continue)
-+
-+#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue
-+
-+#define GET_MATCHES_FOOTER(offset, maxLen) \
-+  offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \
-+  distances + offset, maxLen) - distances); MOVE_POS_RET;
-+
-+#define SKIP_FOOTER \
-+  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
-+
-+static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 offset;
-+  GET_MATCHES_HEADER(2)
-+  HASH2_CALC;
-+  curMatch = p->hash[hashValue];
-+  p->hash[hashValue] = p->pos;
-+  offset = 0;
-+  GET_MATCHES_FOOTER(offset, 1)
-+}
-+
-+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 offset;
-+  GET_MATCHES_HEADER(3)
-+  HASH_ZIP_CALC;
-+  curMatch = p->hash[hashValue];
-+  p->hash[hashValue] = p->pos;
-+  offset = 0;
-+  GET_MATCHES_FOOTER(offset, 2)
-+}
-+
-+static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, delta2, maxLen, offset;
-+  GET_MATCHES_HEADER(3)
-+
-+  HASH3_CALC;
-+
-+  delta2 = p->pos - p->hash[hash2Value];
-+  curMatch = p->hash[kFix3HashSize + hashValue];
-+
-+  p->hash[hash2Value] =
-+  p->hash[kFix3HashSize + hashValue] = p->pos;
-+
-+
-+  maxLen = 2;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[0] = maxLen;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+    if (maxLen == lenLimit)
-+    {
-+      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-+      MOVE_POS_RET;
-+    }
-+  }
-+  GET_MATCHES_FOOTER(offset, maxLen)
-+}
-+
-+static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-+  GET_MATCHES_HEADER(4)
-+
-+  HASH4_CALC;
-+
-+  delta2 = p->pos - p->hash[                hash2Value];
-+  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-+  curMatch = p->hash[kFix4HashSize + hashValue];
-+
-+  p->hash[                hash2Value] =
-+  p->hash[kFix3HashSize + hash3Value] =
-+  p->hash[kFix4HashSize + hashValue] = p->pos;
-+
-+  maxLen = 1;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    distances[0] = maxLen = 2;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+  }
-+  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-+  {
-+    maxLen = 3;
-+    distances[offset + 1] = delta3 - 1;
-+    offset += 2;
-+    delta2 = delta3;
-+  }
-+  if (offset != 0)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[offset - 2] = maxLen;
-+    if (maxLen == lenLimit)
-+    {
-+      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-+      MOVE_POS_RET;
-+    }
-+  }
-+  if (maxLen < 3)
-+    maxLen = 3;
-+  GET_MATCHES_FOOTER(offset, maxLen)
-+}
-+
-+static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-+  GET_MATCHES_HEADER(4)
-+
-+  HASH4_CALC;
-+
-+  delta2 = p->pos - p->hash[                hash2Value];
-+  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-+  curMatch = p->hash[kFix4HashSize + hashValue];
-+
-+  p->hash[                hash2Value] =
-+  p->hash[kFix3HashSize + hash3Value] =
-+  p->hash[kFix4HashSize + hashValue] = p->pos;
-+
-+  maxLen = 1;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    distances[0] = maxLen = 2;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+  }
-+  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-+  {
-+    maxLen = 3;
-+    distances[offset + 1] = delta3 - 1;
-+    offset += 2;
-+    delta2 = delta3;
-+  }
-+  if (offset != 0)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[offset - 2] = maxLen;
-+    if (maxLen == lenLimit)
-+    {
-+      p->son[p->cyclicBufferPos] = curMatch;
-+      MOVE_POS_RET;
-+    }
-+  }
-+  if (maxLen < 3)
-+    maxLen = 3;
-+  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-+    distances + offset, maxLen) - (distances));
-+  MOVE_POS_RET
-+}
-+
-+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 offset;
-+  GET_MATCHES_HEADER(3)
-+  HASH_ZIP_CALC;
-+  curMatch = p->hash[hashValue];
-+  p->hash[hashValue] = p->pos;
-+  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-+    distances, 2) - (distances));
-+  MOVE_POS_RET
-+}
-+
-+static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    SKIP_HEADER(2)
-+    HASH2_CALC;
-+    curMatch = p->hash[hashValue];
-+    p->hash[hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    SKIP_HEADER(3)
-+    HASH_ZIP_CALC;
-+    curMatch = p->hash[hashValue];
-+    p->hash[hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value;
-+    SKIP_HEADER(3)
-+    HASH3_CALC;
-+    curMatch = p->hash[kFix3HashSize + hashValue];
-+    p->hash[hash2Value] =
-+    p->hash[kFix3HashSize + hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value, hash3Value;
-+    SKIP_HEADER(4)
-+    HASH4_CALC;
-+    curMatch = p->hash[kFix4HashSize + hashValue];
-+    p->hash[                hash2Value] =
-+    p->hash[kFix3HashSize + hash3Value] = p->pos;
-+    p->hash[kFix4HashSize + hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value, hash3Value;
-+    SKIP_HEADER(4)
-+    HASH4_CALC;
-+    curMatch = p->hash[kFix4HashSize + hashValue];
-+    p->hash[                hash2Value] =
-+    p->hash[kFix3HashSize + hash3Value] =
-+    p->hash[kFix4HashSize + hashValue] = p->pos;
-+    p->son[p->cyclicBufferPos] = curMatch;
-+    MOVE_POS
-+  }
-+  while (--num != 0);
-+}
-+
-+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    SKIP_HEADER(3)
-+    HASH_ZIP_CALC;
-+    curMatch = p->hash[hashValue];
-+    p->hash[hashValue] = p->pos;
-+    p->son[p->cyclicBufferPos] = curMatch;
-+    MOVE_POS
-+  }
-+  while (--num != 0);
-+}
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
-+{
-+  vTable->Init = (Mf_Init_Func)MatchFinder_Init;
-+  vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
-+  vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
-+  vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
-+  if (!p->btMode)
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
-+  }
-+  else if (p->numHashBytes == 2)
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
-+  }
-+  else if (p->numHashBytes == 3)
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
-+  }
-+  else
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
-+  }
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaDec.c
-@@ -0,0 +1,999 @@
-+/* LzmaDec.c -- LZMA Decoder
-+2009-09-20 : Igor Pavlov : Public domain */
-+
-+#include "LzmaDec.h"
-+
-+#include <string.h>
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+
-+#define RC_INIT_SIZE 5
-+
-+#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
-+#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
-+#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
-+  { UPDATE_0(p); i = (i + i); A0; } else \
-+  { UPDATE_1(p); i = (i + i) + 1; A1; }
-+#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
-+
-+#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
-+#define TREE_DECODE(probs, limit, i) \
-+  { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
-+
-+/* #define _LZMA_SIZE_OPT */
-+
-+#ifdef _LZMA_SIZE_OPT
-+#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
-+#else
-+#define TREE_6_DECODE(probs, i) \
-+  { i = 1; \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  i -= 0x40; }
-+#endif
-+
-+#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0_CHECK range = bound;
-+#define UPDATE_1_CHECK range -= bound; code -= bound;
-+#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
-+  { UPDATE_0_CHECK; i = (i + i); A0; } else \
-+  { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
-+#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
-+#define TREE_DECODE_CHECK(probs, limit, i) \
-+  { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
-+
-+
-+#define kNumPosBitsMax 4
-+#define kNumPosStatesMax (1 << kNumPosBitsMax)
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define LenChoice 0
-+#define LenChoice2 (LenChoice + 1)
-+#define LenLow (LenChoice2 + 1)
-+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-+
-+
-+#define kNumStates 12
-+#define kNumLitStates 7
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#define kNumPosSlotBits 6
-+#define kNumLenToPosStates 4
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+
-+#define kMatchMinLen 2
-+#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define IsMatch 0
-+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-+#define IsRepG0 (IsRep + kNumStates)
-+#define IsRepG1 (IsRepG0 + kNumStates)
-+#define IsRepG2 (IsRepG1 + kNumStates)
-+#define IsRep0Long (IsRepG2 + kNumStates)
-+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-+#define LenCoder (Align + kAlignTableSize)
-+#define RepLenCoder (LenCoder + kNumLenProbs)
-+#define Literal (RepLenCoder + kNumLenProbs)
-+
-+#define LZMA_BASE_SIZE 1846
-+#define LZMA_LIT_SIZE 768
-+
-+#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
-+
-+#if Literal != LZMA_BASE_SIZE
-+StopCompilingDueBUG
-+#endif
-+
-+#define LZMA_DIC_MIN (1 << 12)
-+
-+/* First LZMA-symbol is always decoded.
-+And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
-+Out:
-+  Result:
-+    SZ_OK - OK
-+    SZ_ERROR_DATA - Error
-+  p->remainLen:
-+    < kMatchSpecLenStart : normal remain
-+    = kMatchSpecLenStart : finished
-+    = kMatchSpecLenStart + 1 : Flush marker
-+    = kMatchSpecLenStart + 2 : State Init Marker
-+*/
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+  CLzmaProb *probs = p->probs;
-+
-+  unsigned state = p->state;
-+  UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
-+  unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
-+  unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
-+  unsigned lc = p->prop.lc;
-+
-+  Byte *dic = p->dic;
-+  SizeT dicBufSize = p->dicBufSize;
-+  SizeT dicPos = p->dicPos;
-+
-+  UInt32 processedPos = p->processedPos;
-+  UInt32 checkDicSize = p->checkDicSize;
-+  unsigned len = 0;
-+
-+  const Byte *buf = p->buf;
-+  UInt32 range = p->range;
-+  UInt32 code = p->code;
-+
-+  do
-+  {
-+    CLzmaProb *prob;
-+    UInt32 bound;
-+    unsigned ttt;
-+    unsigned posState = processedPos & pbMask;
-+
-+    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+    IF_BIT_0(prob)
-+    {
-+      unsigned symbol;
-+      UPDATE_0(prob);
-+      prob = probs + Literal;
-+      if (checkDicSize != 0 || processedPos != 0)
-+        prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
-+        (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
-+
-+      if (state < kNumLitStates)
-+      {
-+        state -= (state < 4) ? state : 3;
-+        symbol = 1;
-+        do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
-+      }
-+      else
-+      {
-+        unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+        unsigned offs = 0x100;
-+        state -= (state < 10) ? 3 : 6;
-+        symbol = 1;
-+        do
-+        {
-+          unsigned bit;
-+          CLzmaProb *probLit;
-+          matchByte <<= 1;
-+          bit = (matchByte & offs);
-+          probLit = prob + offs + bit + symbol;
-+          GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
-+        }
-+        while (symbol < 0x100);
-+      }
-+      dic[dicPos++] = (Byte)symbol;
-+      processedPos++;
-+      continue;
-+    }
-+    else
-+    {
-+      UPDATE_1(prob);
-+      prob = probs + IsRep + state;
-+      IF_BIT_0(prob)
-+      {
-+        UPDATE_0(prob);
-+        state += kNumStates;
-+        prob = probs + LenCoder;
-+      }
-+      else
-+      {
-+        UPDATE_1(prob);
-+        if (checkDicSize == 0 && processedPos == 0)
-+          return SZ_ERROR_DATA;
-+        prob = probs + IsRepG0 + state;
-+        IF_BIT_0(prob)
-+        {
-+          UPDATE_0(prob);
-+          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+          IF_BIT_0(prob)
-+          {
-+            UPDATE_0(prob);
-+            dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+            dicPos++;
-+            processedPos++;
-+            state = state < kNumLitStates ? 9 : 11;
-+            continue;
-+          }
-+          UPDATE_1(prob);
-+        }
-+        else
-+        {
-+          UInt32 distance;
-+          UPDATE_1(prob);
-+          prob = probs + IsRepG1 + state;
-+          IF_BIT_0(prob)
-+          {
-+            UPDATE_0(prob);
-+            distance = rep1;
-+          }
-+          else
-+          {
-+            UPDATE_1(prob);
-+            prob = probs + IsRepG2 + state;
-+            IF_BIT_0(prob)
-+            {
-+              UPDATE_0(prob);
-+              distance = rep2;
-+            }
-+            else
-+            {
-+              UPDATE_1(prob);
-+              distance = rep3;
-+              rep3 = rep2;
-+            }
-+            rep2 = rep1;
-+          }
-+          rep1 = rep0;
-+          rep0 = distance;
-+        }
-+        state = state < kNumLitStates ? 8 : 11;
-+        prob = probs + RepLenCoder;
-+      }
-+      {
-+        unsigned limit, offset;
-+        CLzmaProb *probLen = prob + LenChoice;
-+        IF_BIT_0(probLen)
-+        {
-+          UPDATE_0(probLen);
-+          probLen = prob + LenLow + (posState << kLenNumLowBits);
-+          offset = 0;
-+          limit = (1 << kLenNumLowBits);
-+        }
-+        else
-+        {
-+          UPDATE_1(probLen);
-+          probLen = prob + LenChoice2;
-+          IF_BIT_0(probLen)
-+          {
-+            UPDATE_0(probLen);
-+            probLen = prob + LenMid + (posState << kLenNumMidBits);
-+            offset = kLenNumLowSymbols;
-+            limit = (1 << kLenNumMidBits);
-+          }
-+          else
-+          {
-+            UPDATE_1(probLen);
-+            probLen = prob + LenHigh;
-+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+            limit = (1 << kLenNumHighBits);
-+          }
-+        }
-+        TREE_DECODE(probLen, limit, len);
-+        len += offset;
-+      }
-+
-+      if (state >= kNumStates)
-+      {
-+        UInt32 distance;
-+        prob = probs + PosSlot +
-+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
-+        TREE_6_DECODE(prob, distance);
-+        if (distance >= kStartPosModelIndex)
-+        {
-+          unsigned posSlot = (unsigned)distance;
-+          int numDirectBits = (int)(((distance >> 1) - 1));
-+          distance = (2 | (distance & 1));
-+          if (posSlot < kEndPosModelIndex)
-+          {
-+            distance <<= numDirectBits;
-+            prob = probs + SpecPos + distance - posSlot - 1;
-+            {
-+              UInt32 mask = 1;
-+              unsigned i = 1;
-+              do
-+              {
-+                GET_BIT2(prob + i, i, ; , distance |= mask);
-+                mask <<= 1;
-+              }
-+              while (--numDirectBits != 0);
-+            }
-+          }
-+          else
-+          {
-+            numDirectBits -= kNumAlignBits;
-+            do
-+            {
-+              NORMALIZE
-+              range >>= 1;
-+
-+              {
-+                UInt32 t;
-+                code -= range;
-+                t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
-+                distance = (distance << 1) + (t + 1);
-+                code += range & t;
-+              }
-+              /*
-+              distance <<= 1;
-+              if (code >= range)
-+              {
-+                code -= range;
-+                distance |= 1;
-+              }
-+              */
-+            }
-+            while (--numDirectBits != 0);
-+            prob = probs + Align;
-+            distance <<= kNumAlignBits;
-+            {
-+              unsigned i = 1;
-+              GET_BIT2(prob + i, i, ; , distance |= 1);
-+              GET_BIT2(prob + i, i, ; , distance |= 2);
-+              GET_BIT2(prob + i, i, ; , distance |= 4);
-+              GET_BIT2(prob + i, i, ; , distance |= 8);
-+            }
-+            if (distance == (UInt32)0xFFFFFFFF)
-+            {
-+              len += kMatchSpecLenStart;
-+              state -= kNumStates;
-+              break;
-+            }
-+          }
-+        }
-+        rep3 = rep2;
-+        rep2 = rep1;
-+        rep1 = rep0;
-+        rep0 = distance + 1;
-+        if (checkDicSize == 0)
-+        {
-+          if (distance >= processedPos)
-+            return SZ_ERROR_DATA;
-+        }
-+        else if (distance >= checkDicSize)
-+          return SZ_ERROR_DATA;
-+        state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
-+      }
-+
-+      len += kMatchMinLen;
-+
-+      if (limit == dicPos)
-+        return SZ_ERROR_DATA;
-+      {
-+        SizeT rem = limit - dicPos;
-+        unsigned curLen = ((rem < len) ? (unsigned)rem : len);
-+        SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
-+
-+        processedPos += curLen;
-+
-+        len -= curLen;
-+        if (pos + curLen <= dicBufSize)
-+        {
-+          Byte *dest = dic + dicPos;
-+          ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
-+          const Byte *lim = dest + curLen;
-+          dicPos += curLen;
-+          do
-+            *(dest) = (Byte)*(dest + src);
-+          while (++dest != lim);
-+        }
-+        else
-+        {
-+          do
-+          {
-+            dic[dicPos++] = dic[pos];
-+            if (++pos == dicBufSize)
-+              pos = 0;
-+          }
-+          while (--curLen != 0);
-+        }
-+      }
-+    }
-+  }
-+  while (dicPos < limit && buf < bufLimit);
-+  NORMALIZE;
-+  p->buf = buf;
-+  p->range = range;
-+  p->code = code;
-+  p->remainLen = len;
-+  p->dicPos = dicPos;
-+  p->processedPos = processedPos;
-+  p->reps[0] = rep0;
-+  p->reps[1] = rep1;
-+  p->reps[2] = rep2;
-+  p->reps[3] = rep3;
-+  p->state = state;
-+
-+  return SZ_OK;
-+}
-+
-+static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
-+{
-+  if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
-+  {
-+    Byte *dic = p->dic;
-+    SizeT dicPos = p->dicPos;
-+    SizeT dicBufSize = p->dicBufSize;
-+    unsigned len = p->remainLen;
-+    UInt32 rep0 = p->reps[0];
-+    if (limit - dicPos < len)
-+      len = (unsigned)(limit - dicPos);
-+
-+    if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
-+      p->checkDicSize = p->prop.dicSize;
-+
-+    p->processedPos += len;
-+    p->remainLen -= len;
-+    while (len-- != 0)
-+    {
-+      dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+      dicPos++;
-+    }
-+    p->dicPos = dicPos;
-+  }
-+}
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+  do
-+  {
-+    SizeT limit2 = limit;
-+    if (p->checkDicSize == 0)
-+    {
-+      UInt32 rem = p->prop.dicSize - p->processedPos;
-+      if (limit - p->dicPos > rem)
-+        limit2 = p->dicPos + rem;
-+    }
-+    RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
-+    if (p->processedPos >= p->prop.dicSize)
-+      p->checkDicSize = p->prop.dicSize;
-+    LzmaDec_WriteRem(p, limit);
-+  }
-+  while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
-+
-+  if (p->remainLen > kMatchSpecLenStart)
-+  {
-+    p->remainLen = kMatchSpecLenStart;
-+  }
-+  return 0;
-+}
-+
-+typedef enum
-+{
-+  DUMMY_ERROR, /* unexpected end of input stream */
-+  DUMMY_LIT,
-+  DUMMY_MATCH,
-+  DUMMY_REP
-+} ELzmaDummy;
-+
-+static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
-+{
-+  UInt32 range = p->range;
-+  UInt32 code = p->code;
-+  const Byte *bufLimit = buf + inSize;
-+  CLzmaProb *probs = p->probs;
-+  unsigned state = p->state;
-+  ELzmaDummy res;
-+
-+  {
-+    CLzmaProb *prob;
-+    UInt32 bound;
-+    unsigned ttt;
-+    unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
-+
-+    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+    IF_BIT_0_CHECK(prob)
-+    {
-+      UPDATE_0_CHECK
-+
-+      /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
-+
-+      prob = probs + Literal;
-+      if (p->checkDicSize != 0 || p->processedPos != 0)
-+        prob += (LZMA_LIT_SIZE *
-+          ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
-+          (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
-+
-+      if (state < kNumLitStates)
-+      {
-+        unsigned symbol = 1;
-+        do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
-+      }
-+      else
-+      {
-+        unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
-+            ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
-+        unsigned offs = 0x100;
-+        unsigned symbol = 1;
-+        do
-+        {
-+          unsigned bit;
-+          CLzmaProb *probLit;
-+          matchByte <<= 1;
-+          bit = (matchByte & offs);
-+          probLit = prob + offs + bit + symbol;
-+          GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
-+        }
-+        while (symbol < 0x100);
-+      }
-+      res = DUMMY_LIT;
-+    }
-+    else
-+    {
-+      unsigned len;
-+      UPDATE_1_CHECK;
-+
-+      prob = probs + IsRep + state;
-+      IF_BIT_0_CHECK(prob)
-+      {
-+        UPDATE_0_CHECK;
-+        state = 0;
-+        prob = probs + LenCoder;
-+        res = DUMMY_MATCH;
-+      }
-+      else
-+      {
-+        UPDATE_1_CHECK;
-+        res = DUMMY_REP;
-+        prob = probs + IsRepG0 + state;
-+        IF_BIT_0_CHECK(prob)
-+        {
-+          UPDATE_0_CHECK;
-+          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+          IF_BIT_0_CHECK(prob)
-+          {
-+            UPDATE_0_CHECK;
-+            NORMALIZE_CHECK;
-+            return DUMMY_REP;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+          }
-+        }
-+        else
-+        {
-+          UPDATE_1_CHECK;
-+          prob = probs + IsRepG1 + state;
-+          IF_BIT_0_CHECK(prob)
-+          {
-+            UPDATE_0_CHECK;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+            prob = probs + IsRepG2 + state;
-+            IF_BIT_0_CHECK(prob)
-+            {
-+              UPDATE_0_CHECK;
-+            }
-+            else
-+            {
-+              UPDATE_1_CHECK;
-+            }
-+          }
-+        }
-+        state = kNumStates;
-+        prob = probs + RepLenCoder;
-+      }
-+      {
-+        unsigned limit, offset;
-+        CLzmaProb *probLen = prob + LenChoice;
-+        IF_BIT_0_CHECK(probLen)
-+        {
-+          UPDATE_0_CHECK;
-+          probLen = prob + LenLow + (posState << kLenNumLowBits);
-+          offset = 0;
-+          limit = 1 << kLenNumLowBits;
-+        }
-+        else
-+        {
-+          UPDATE_1_CHECK;
-+          probLen = prob + LenChoice2;
-+          IF_BIT_0_CHECK(probLen)
-+          {
-+            UPDATE_0_CHECK;
-+            probLen = prob + LenMid + (posState << kLenNumMidBits);
-+            offset = kLenNumLowSymbols;
-+            limit = 1 << kLenNumMidBits;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+            probLen = prob + LenHigh;
-+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+            limit = 1 << kLenNumHighBits;
-+          }
-+        }
-+        TREE_DECODE_CHECK(probLen, limit, len);
-+        len += offset;
-+      }
-+
-+      if (state < 4)
-+      {
-+        unsigned posSlot;
-+        prob = probs + PosSlot +
-+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
-+            kNumPosSlotBits);
-+        TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
-+        if (posSlot >= kStartPosModelIndex)
-+        {
-+          int numDirectBits = ((posSlot >> 1) - 1);
-+
-+          /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
-+
-+          if (posSlot < kEndPosModelIndex)
-+          {
-+            prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
-+          }
-+          else
-+          {
-+            numDirectBits -= kNumAlignBits;
-+            do
-+            {
-+              NORMALIZE_CHECK
-+              range >>= 1;
-+              code -= range & (((code - range) >> 31) - 1);
-+              /* if (code >= range) code -= range; */
-+            }
-+            while (--numDirectBits != 0);
-+            prob = probs + Align;
-+            numDirectBits = kNumAlignBits;
-+          }
-+          {
-+            unsigned i = 1;
-+            do
-+            {
-+              GET_BIT_CHECK(prob + i, i);
-+            }
-+            while (--numDirectBits != 0);
-+          }
-+        }
-+      }
-+    }
-+  }
-+  NORMALIZE_CHECK;
-+  return res;
-+}
-+
-+
-+static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
-+{
-+  p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
-+  p->range = 0xFFFFFFFF;
-+  p->needFlush = 0;
-+}
-+
-+void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
-+{
-+  p->needFlush = 1;
-+  p->remainLen = 0;
-+  p->tempBufSize = 0;
-+
-+  if (initDic)
-+  {
-+    p->processedPos = 0;
-+    p->checkDicSize = 0;
-+    p->needInitState = 1;
-+  }
-+  if (initState)
-+    p->needInitState = 1;
-+}
-+
-+void LzmaDec_Init(CLzmaDec *p)
-+{
-+  p->dicPos = 0;
-+  LzmaDec_InitDicAndState(p, True, True);
-+}
-+
-+static void LzmaDec_InitStateReal(CLzmaDec *p)
-+{
-+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
-+  UInt32 i;
-+  CLzmaProb *probs = p->probs;
-+  for (i = 0; i < numProbs; i++)
-+    probs[i] = kBitModelTotal >> 1;
-+  p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
-+  p->state = 0;
-+  p->needInitState = 0;
-+}
-+
-+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-+    ELzmaFinishMode finishMode, ELzmaStatus *status)
-+{
-+  SizeT inSize = *srcLen;
-+  (*srcLen) = 0;
-+  LzmaDec_WriteRem(p, dicLimit);
-+
-+  *status = LZMA_STATUS_NOT_SPECIFIED;
-+
-+  while (p->remainLen != kMatchSpecLenStart)
-+  {
-+      int checkEndMarkNow;
-+
-+      if (p->needFlush != 0)
-+      {
-+        for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
-+          p->tempBuf[p->tempBufSize++] = *src++;
-+        if (p->tempBufSize < RC_INIT_SIZE)
-+        {
-+          *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+          return SZ_OK;
-+        }
-+        if (p->tempBuf[0] != 0)
-+          return SZ_ERROR_DATA;
-+
-+        LzmaDec_InitRc(p, p->tempBuf);
-+        p->tempBufSize = 0;
-+      }
-+
-+      checkEndMarkNow = 0;
-+      if (p->dicPos >= dicLimit)
-+      {
-+        if (p->remainLen == 0 && p->code == 0)
-+        {
-+          *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
-+          return SZ_OK;
-+        }
-+        if (finishMode == LZMA_FINISH_ANY)
-+        {
-+          *status = LZMA_STATUS_NOT_FINISHED;
-+          return SZ_OK;
-+        }
-+        if (p->remainLen != 0)
-+        {
-+          *status = LZMA_STATUS_NOT_FINISHED;
-+          return SZ_ERROR_DATA;
-+        }
-+        checkEndMarkNow = 1;
-+      }
-+
-+      if (p->needInitState)
-+        LzmaDec_InitStateReal(p);
-+
-+      if (p->tempBufSize == 0)
-+      {
-+        SizeT processed;
-+        const Byte *bufLimit;
-+        if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+        {
-+          int dummyRes = LzmaDec_TryDummy(p, src, inSize);
-+          if (dummyRes == DUMMY_ERROR)
-+          {
-+            memcpy(p->tempBuf, src, inSize);
-+            p->tempBufSize = (unsigned)inSize;
-+            (*srcLen) += inSize;
-+            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+            return SZ_OK;
-+          }
-+          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+          {
-+            *status = LZMA_STATUS_NOT_FINISHED;
-+            return SZ_ERROR_DATA;
-+          }
-+          bufLimit = src;
-+        }
-+        else
-+          bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
-+        p->buf = src;
-+        if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
-+          return SZ_ERROR_DATA;
-+        processed = (SizeT)(p->buf - src);
-+        (*srcLen) += processed;
-+        src += processed;
-+        inSize -= processed;
-+      }
-+      else
-+      {
-+        unsigned rem = p->tempBufSize, lookAhead = 0;
-+        while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
-+          p->tempBuf[rem++] = src[lookAhead++];
-+        p->tempBufSize = rem;
-+        if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+        {
-+          int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
-+          if (dummyRes == DUMMY_ERROR)
-+          {
-+            (*srcLen) += lookAhead;
-+            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+            return SZ_OK;
-+          }
-+          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+          {
-+            *status = LZMA_STATUS_NOT_FINISHED;
-+            return SZ_ERROR_DATA;
-+          }
-+        }
-+        p->buf = p->tempBuf;
-+        if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
-+          return SZ_ERROR_DATA;
-+        lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
-+        (*srcLen) += lookAhead;
-+        src += lookAhead;
-+        inSize -= lookAhead;
-+        p->tempBufSize = 0;
-+      }
-+  }
-+  if (p->code == 0)
-+    *status = LZMA_STATUS_FINISHED_WITH_MARK;
-+  return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
-+}
-+
-+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
-+{
-+  SizeT outSize = *destLen;
-+  SizeT inSize = *srcLen;
-+  *srcLen = *destLen = 0;
-+  for (;;)
-+  {
-+    SizeT inSizeCur = inSize, outSizeCur, dicPos;
-+    ELzmaFinishMode curFinishMode;
-+    SRes res;
-+    if (p->dicPos == p->dicBufSize)
-+      p->dicPos = 0;
-+    dicPos = p->dicPos;
-+    if (outSize > p->dicBufSize - dicPos)
-+    {
-+      outSizeCur = p->dicBufSize;
-+      curFinishMode = LZMA_FINISH_ANY;
-+    }
-+    else
-+    {
-+      outSizeCur = dicPos + outSize;
-+      curFinishMode = finishMode;
-+    }
-+
-+    res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
-+    src += inSizeCur;
-+    inSize -= inSizeCur;
-+    *srcLen += inSizeCur;
-+    outSizeCur = p->dicPos - dicPos;
-+    memcpy(dest, p->dic + dicPos, outSizeCur);
-+    dest += outSizeCur;
-+    outSize -= outSizeCur;
-+    *destLen += outSizeCur;
-+    if (res != 0)
-+      return res;
-+    if (outSizeCur == 0 || outSize == 0)
-+      return SZ_OK;
-+  }
-+}
-+
-+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->probs);
-+  p->probs = 0;
-+}
-+
-+static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->dic);
-+  p->dic = 0;
-+}
-+
-+void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  LzmaDec_FreeProbs(p, alloc);
-+  LzmaDec_FreeDict(p, alloc);
-+}
-+
-+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
-+{
-+  UInt32 dicSize;
-+  Byte d;
-+
-+  if (size < LZMA_PROPS_SIZE)
-+    return SZ_ERROR_UNSUPPORTED;
-+  else
-+    dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
-+
-+  if (dicSize < LZMA_DIC_MIN)
-+    dicSize = LZMA_DIC_MIN;
-+  p->dicSize = dicSize;
-+
-+  d = data[0];
-+  if (d >= (9 * 5 * 5))
-+    return SZ_ERROR_UNSUPPORTED;
-+
-+  p->lc = d % 9;
-+  d /= 9;
-+  p->pb = d / 5;
-+  p->lp = d % 5;
-+
-+  return SZ_OK;
-+}
-+
-+static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
-+{
-+  UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
-+  if (p->probs == 0 || numProbs != p->numProbs)
-+  {
-+    LzmaDec_FreeProbs(p, alloc);
-+    p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
-+    p->numProbs = numProbs;
-+    if (p->probs == 0)
-+      return SZ_ERROR_MEM;
-+  }
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+{
-+  CLzmaProps propNew;
-+  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-+  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-+  p->prop = propNew;
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+{
-+  CLzmaProps propNew;
-+  SizeT dicBufSize;
-+  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-+  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-+  dicBufSize = propNew.dicSize;
-+  if (p->dic == 0 || dicBufSize != p->dicBufSize)
-+  {
-+    LzmaDec_FreeDict(p, alloc);
-+    p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
-+    if (p->dic == 0)
-+    {
-+      LzmaDec_FreeProbs(p, alloc);
-+      return SZ_ERROR_MEM;
-+    }
-+  }
-+  p->dicBufSize = dicBufSize;
-+  p->prop = propNew;
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+    ELzmaStatus *status, ISzAlloc *alloc)
-+{
-+  CLzmaDec p;
-+  SRes res;
-+  SizeT inSize = *srcLen;
-+  SizeT outSize = *destLen;
-+  *srcLen = *destLen = 0;
-+  if (inSize < RC_INIT_SIZE)
-+    return SZ_ERROR_INPUT_EOF;
-+
-+  LzmaDec_Construct(&p);
-+  res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
-+  if (res != 0)
-+    return res;
-+  p.dic = dest;
-+  p.dicBufSize = outSize;
-+
-+  LzmaDec_Init(&p);
-+
-+  *srcLen = inSize;
-+  res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
-+
-+  if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
-+    res = SZ_ERROR_INPUT_EOF;
-+
-+  (*destLen) = p.dicPos;
-+  LzmaDec_FreeProbs(&p, alloc);
-+  return res;
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaEnc.c
-@@ -0,0 +1,2271 @@
-+/* LzmaEnc.c -- LZMA Encoder
-+2009-11-24 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+/* #define SHOW_STAT */
-+/* #define SHOW_STAT2 */
-+
-+#if defined(SHOW_STAT) || defined(SHOW_STAT2)
-+#include <stdio.h>
-+#endif
-+
-+#include "LzmaEnc.h"
-+
-+/* disable MT */
-+#define _7ZIP_ST
-+
-+#include "LzFind.h"
-+#ifndef _7ZIP_ST
-+#include "LzFindMt.h"
-+#endif
-+
-+#ifdef SHOW_STAT
-+static int ttt = 0;
-+#endif
-+
-+#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1)
-+
-+#define kBlockSize (9 << 10)
-+#define kUnpackBlockSize (1 << 18)
-+#define kMatchArraySize (1 << 21)
-+#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX)
-+
-+#define kNumMaxDirectBits (31)
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+#define kProbInitValue (kBitModelTotal >> 1)
-+
-+#define kNumMoveReducingBits 4
-+#define kNumBitPriceShiftBits 4
-+#define kBitPrice (1 << kNumBitPriceShiftBits)
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p)
-+{
-+  p->level = 5;
-+  p->dictSize = p->mc = 0;
-+  p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1;
-+  p->writeEndMark = 0;
-+}
-+
-+void LzmaEncProps_Normalize(CLzmaEncProps *p)
-+{
-+  int level = p->level;
-+  if (level < 0) level = 5;
-+  p->level = level;
-+  if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26)));
-+  if (p->lc < 0) p->lc = 3;
-+  if (p->lp < 0) p->lp = 0;
-+  if (p->pb < 0) p->pb = 2;
-+  if (p->algo < 0) p->algo = (level < 5 ? 0 : 1);
-+  if (p->fb < 0) p->fb = (level < 7 ? 32 : 64);
-+  if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1);
-+  if (p->numHashBytes < 0) p->numHashBytes = 4;
-+  if (p->mc == 0)  p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1);
-+  if (p->numThreads < 0)
-+    p->numThreads =
-+      #ifndef _7ZIP_ST
-+      ((p->btMode && p->algo) ? 2 : 1);
-+      #else
-+      1;
-+      #endif
-+}
-+
-+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
-+{
-+  CLzmaEncProps props = *props2;
-+  LzmaEncProps_Normalize(&props);
-+  return props.dictSize;
-+}
-+
-+/* #define LZMA_LOG_BSR */
-+/* Define it for Intel's CPU */
-+
-+
-+#ifdef LZMA_LOG_BSR
-+
-+#define kDicLogSizeMaxCompress 30
-+
-+#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
-+
-+UInt32 GetPosSlot1(UInt32 pos)
-+{
-+  UInt32 res;
-+  BSR2_RET(pos, res);
-+  return res;
-+}
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); }
-+
-+#else
-+
-+#define kNumLogBits (9 + (int)sizeof(size_t) / 2)
-+#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
-+
-+void LzmaEnc_FastPosInit(Byte *g_FastPos)
-+{
-+  int c = 2, slotFast;
-+  g_FastPos[0] = 0;
-+  g_FastPos[1] = 1;
-+
-+  for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++)
-+  {
-+    UInt32 k = (1 << ((slotFast >> 1) - 1));
-+    UInt32 j;
-+    for (j = 0; j < k; j++, c++)
-+      g_FastPos[c] = (Byte)slotFast;
-+  }
-+}
-+
-+#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \
-+  (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \
-+  res = p->g_FastPos[pos >> i] + (i * 2); }
-+/*
-+#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \
-+  p->g_FastPos[pos >> 6] + 12 : \
-+  p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; }
-+*/
-+
-+#define GetPosSlot1(pos) p->g_FastPos[pos]
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); }
-+
-+#endif
-+
-+
-+#define LZMA_NUM_REPS 4
-+
-+typedef unsigned CState;
-+
-+typedef struct
-+{
-+  UInt32 price;
-+
-+  CState state;
-+  int prev1IsChar;
-+  int prev2;
-+
-+  UInt32 posPrev2;
-+  UInt32 backPrev2;
-+
-+  UInt32 posPrev;
-+  UInt32 backPrev;
-+  UInt32 backs[LZMA_NUM_REPS];
-+} COptimal;
-+
-+#define kNumOpts (1 << 12)
-+
-+#define kNumLenToPosStates 4
-+#define kNumPosSlotBits 6
-+#define kDicLogSizeMin 0
-+#define kDicLogSizeMax 32
-+#define kDistTableSizeMax (kDicLogSizeMax * 2)
-+
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+#define kAlignMask (kAlignTableSize - 1)
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex)
-+
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+#define LZMA_PB_MAX 4
-+#define LZMA_LC_MAX 8
-+#define LZMA_LP_MAX 4
-+
-+#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX)
-+
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define LZMA_MATCH_LEN_MIN 2
-+#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1)
-+
-+#define kNumStates 12
-+
-+typedef struct
-+{
-+  CLzmaProb choice;
-+  CLzmaProb choice2;
-+  CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits];
-+  CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits];
-+  CLzmaProb high[kLenNumHighSymbols];
-+} CLenEnc;
-+
-+typedef struct
-+{
-+  CLenEnc p;
-+  UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal];
-+  UInt32 tableSize;
-+  UInt32 counters[LZMA_NUM_PB_STATES_MAX];
-+} CLenPriceEnc;
-+
-+typedef struct
-+{
-+  UInt32 range;
-+  Byte cache;
-+  UInt64 low;
-+  UInt64 cacheSize;
-+  Byte *buf;
-+  Byte *bufLim;
-+  Byte *bufBase;
-+  ISeqOutStream *outStream;
-+  UInt64 processed;
-+  SRes res;
-+} CRangeEnc;
-+
-+typedef struct
-+{
-+  CLzmaProb *litProbs;
-+
-+  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+  CLzmaProb isRep[kNumStates];
-+  CLzmaProb isRepG0[kNumStates];
-+  CLzmaProb isRepG1[kNumStates];
-+  CLzmaProb isRepG2[kNumStates];
-+  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+
-+  CLenPriceEnc lenEnc;
-+  CLenPriceEnc repLenEnc;
-+
-+  UInt32 reps[LZMA_NUM_REPS];
-+  UInt32 state;
-+} CSaveState;
-+
-+typedef struct
-+{
-+  IMatchFinder matchFinder;
-+  void *matchFinderObj;
-+
-+  #ifndef _7ZIP_ST
-+  Bool mtMode;
-+  CMatchFinderMt matchFinderMt;
-+  #endif
-+
-+  CMatchFinder matchFinderBase;
-+
-+  #ifndef _7ZIP_ST
-+  Byte pad[128];
-+  #endif
-+
-+  UInt32 optimumEndIndex;
-+  UInt32 optimumCurrentIndex;
-+
-+  UInt32 longestMatchLength;
-+  UInt32 numPairs;
-+  UInt32 numAvail;
-+  COptimal opt[kNumOpts];
-+
-+  #ifndef LZMA_LOG_BSR
-+  Byte g_FastPos[1 << kNumLogBits];
-+  #endif
-+
-+  UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits];
-+  UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1];
-+  UInt32 numFastBytes;
-+  UInt32 additionalOffset;
-+  UInt32 reps[LZMA_NUM_REPS];
-+  UInt32 state;
-+
-+  UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax];
-+  UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances];
-+  UInt32 alignPrices[kAlignTableSize];
-+  UInt32 alignPriceCount;
-+
-+  UInt32 distTableSize;
-+
-+  unsigned lc, lp, pb;
-+  unsigned lpMask, pbMask;
-+
-+  CLzmaProb *litProbs;
-+
-+  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+  CLzmaProb isRep[kNumStates];
-+  CLzmaProb isRepG0[kNumStates];
-+  CLzmaProb isRepG1[kNumStates];
-+  CLzmaProb isRepG2[kNumStates];
-+  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+
-+  CLenPriceEnc lenEnc;
-+  CLenPriceEnc repLenEnc;
-+
-+  unsigned lclp;
-+
-+  Bool fastMode;
-+
-+  CRangeEnc rc;
-+
-+  Bool writeEndMark;
-+  UInt64 nowPos64;
-+  UInt32 matchPriceCount;
-+  Bool finished;
-+  Bool multiThread;
-+
-+  SRes result;
-+  UInt32 dictSize;
-+  UInt32 matchFinderCycles;
-+
-+  int needInit;
-+
-+  CSaveState saveState;
-+} CLzmaEnc;
-+
-+void LzmaEnc_SaveState(CLzmaEncHandle pp)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  CSaveState *dest = &p->saveState;
-+  int i;
-+  dest->lenEnc = p->lenEnc;
-+  dest->repLenEnc = p->repLenEnc;
-+  dest->state = p->state;
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-+    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-+  }
-+  for (i = 0; i < kNumLenToPosStates; i++)
-+    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-+  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-+  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-+  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-+  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-+  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-+  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-+  memcpy(dest->reps, p->reps, sizeof(p->reps));
-+  memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
-+}
-+
-+void LzmaEnc_RestoreState(CLzmaEncHandle pp)
-+{
-+  CLzmaEnc *dest = (CLzmaEnc *)pp;
-+  const CSaveState *p = &dest->saveState;
-+  int i;
-+  dest->lenEnc = p->lenEnc;
-+  dest->repLenEnc = p->repLenEnc;
-+  dest->state = p->state;
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-+    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-+  }
-+  for (i = 0; i < kNumLenToPosStates; i++)
-+    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-+  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-+  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-+  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-+  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-+  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-+  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-+  memcpy(dest->reps, p->reps, sizeof(p->reps));
-+  memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
-+}
-+
-+SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  CLzmaEncProps props = *props2;
-+  LzmaEncProps_Normalize(&props);
-+
-+  if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX ||
-+      props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30))
-+    return SZ_ERROR_PARAM;
-+  p->dictSize = props.dictSize;
-+  p->matchFinderCycles = props.mc;
-+  {
-+    unsigned fb = props.fb;
-+    if (fb < 5)
-+      fb = 5;
-+    if (fb > LZMA_MATCH_LEN_MAX)
-+      fb = LZMA_MATCH_LEN_MAX;
-+    p->numFastBytes = fb;
-+  }
-+  p->lc = props.lc;
-+  p->lp = props.lp;
-+  p->pb = props.pb;
-+  p->fastMode = (props.algo == 0);
-+  p->matchFinderBase.btMode = props.btMode;
-+  {
-+    UInt32 numHashBytes = 4;
-+    if (props.btMode)
-+    {
-+      if (props.numHashBytes < 2)
-+        numHashBytes = 2;
-+      else if (props.numHashBytes < 4)
-+        numHashBytes = props.numHashBytes;
-+    }
-+    p->matchFinderBase.numHashBytes = numHashBytes;
-+  }
-+
-+  p->matchFinderBase.cutValue = props.mc;
-+
-+  p->writeEndMark = props.writeEndMark;
-+
-+  #ifndef _7ZIP_ST
-+  /*
-+  if (newMultiThread != _multiThread)
-+  {
-+    ReleaseMatchFinder();
-+    _multiThread = newMultiThread;
-+  }
-+  */
-+  p->multiThread = (props.numThreads > 1);
-+  #endif
-+
-+  return SZ_OK;
-+}
-+
-+static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4,  5,  6,   4, 5};
-+static const int kMatchNextStates[kNumStates]   = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10};
-+static const int kRepNextStates[kNumStates]     = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11};
-+static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11};
-+
-+#define IsCharState(s) ((s) < 7)
-+
-+#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1)
-+
-+#define kInfinityPrice (1 << 30)
-+
-+static void RangeEnc_Construct(CRangeEnc *p)
-+{
-+  p->outStream = 0;
-+  p->bufBase = 0;
-+}
-+
-+#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize)
-+
-+#define RC_BUF_SIZE (1 << 16)
-+static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+  if (p->bufBase == 0)
-+  {
-+    p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE);
-+    if (p->bufBase == 0)
-+      return 0;
-+    p->bufLim = p->bufBase + RC_BUF_SIZE;
-+  }
-+  return 1;
-+}
-+
-+static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->bufBase);
-+  p->bufBase = 0;
-+}
-+
-+static void RangeEnc_Init(CRangeEnc *p)
-+{
-+  /* Stream.Init(); */
-+  p->low = 0;
-+  p->range = 0xFFFFFFFF;
-+  p->cacheSize = 1;
-+  p->cache = 0;
-+
-+  p->buf = p->bufBase;
-+
-+  p->processed = 0;
-+  p->res = SZ_OK;
-+}
-+
-+static void RangeEnc_FlushStream(CRangeEnc *p)
-+{
-+  size_t num;
-+  if (p->res != SZ_OK)
-+    return;
-+  num = p->buf - p->bufBase;
-+  if (num != p->outStream->Write(p->outStream, p->bufBase, num))
-+    p->res = SZ_ERROR_WRITE;
-+  p->processed += num;
-+  p->buf = p->bufBase;
-+}
-+
-+static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p)
-+{
-+  if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0)
-+  {
-+    Byte temp = p->cache;
-+    do
-+    {
-+      Byte *buf = p->buf;
-+      *buf++ = (Byte)(temp + (Byte)(p->low >> 32));
-+      p->buf = buf;
-+      if (buf == p->bufLim)
-+        RangeEnc_FlushStream(p);
-+      temp = 0xFF;
-+    }
-+    while (--p->cacheSize != 0);
-+    p->cache = (Byte)((UInt32)p->low >> 24);
-+  }
-+  p->cacheSize++;
-+  p->low = (UInt32)p->low << 8;
-+}
-+
-+static void RangeEnc_FlushData(CRangeEnc *p)
-+{
-+  int i;
-+  for (i = 0; i < 5; i++)
-+    RangeEnc_ShiftLow(p);
-+}
-+
-+static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits)
-+{
-+  do
-+  {
-+    p->range >>= 1;
-+    p->low += p->range & (0 - ((value >> --numBits) & 1));
-+    if (p->range < kTopValue)
-+    {
-+      p->range <<= 8;
-+      RangeEnc_ShiftLow(p);
-+    }
-+  }
-+  while (numBits != 0);
-+}
-+
-+static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol)
-+{
-+  UInt32 ttt = *prob;
-+  UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt;
-+  if (symbol == 0)
-+  {
-+    p->range = newBound;
-+    ttt += (kBitModelTotal - ttt) >> kNumMoveBits;
-+  }
-+  else
-+  {
-+    p->low += newBound;
-+    p->range -= newBound;
-+    ttt -= ttt >> kNumMoveBits;
-+  }
-+  *prob = (CLzmaProb)ttt;
-+  if (p->range < kTopValue)
-+  {
-+    p->range <<= 8;
-+    RangeEnc_ShiftLow(p);
-+  }
-+}
-+
-+static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol)
-+{
-+  symbol |= 0x100;
-+  do
-+  {
-+    RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1);
-+    symbol <<= 1;
-+  }
-+  while (symbol < 0x10000);
-+}
-+
-+static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte)
-+{
-+  UInt32 offs = 0x100;
-+  symbol |= 0x100;
-+  do
-+  {
-+    matchByte <<= 1;
-+    RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1);
-+    symbol <<= 1;
-+    offs &= ~(matchByte ^ symbol);
-+  }
-+  while (symbol < 0x10000);
-+}
-+
-+void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
-+{
-+  UInt32 i;
-+  for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
-+  {
-+    const int kCyclesBits = kNumBitPriceShiftBits;
-+    UInt32 w = i;
-+    UInt32 bitCount = 0;
-+    int j;
-+    for (j = 0; j < kCyclesBits; j++)
-+    {
-+      w = w * w;
-+      bitCount <<= 1;
-+      while (w >= ((UInt32)1 << 16))
-+      {
-+        w >>= 1;
-+        bitCount++;
-+      }
-+    }
-+    ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount);
-+  }
-+}
-+
-+
-+#define GET_PRICE(prob, symbol) \
-+  p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICEa(prob, symbol) \
-+  ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  symbol |= 0x100;
-+  do
-+  {
-+    price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1);
-+    symbol <<= 1;
-+  }
-+  while (symbol < 0x10000);
-+  return price;
-+}
-+
-+static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  UInt32 offs = 0x100;
-+  symbol |= 0x100;
-+  do
-+  {
-+    matchByte <<= 1;
-+    price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1);
-+    symbol <<= 1;
-+    offs &= ~(matchByte ^ symbol);
-+  }
-+  while (symbol < 0x10000);
-+  return price;
-+}
-+
-+
-+static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+  UInt32 m = 1;
-+  int i;
-+  for (i = numBitLevels; i != 0;)
-+  {
-+    UInt32 bit;
-+    i--;
-+    bit = (symbol >> i) & 1;
-+    RangeEnc_EncodeBit(rc, probs + m, bit);
-+    m = (m << 1) | bit;
-+  }
-+}
-+
-+static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+  UInt32 m = 1;
-+  int i;
-+  for (i = 0; i < numBitLevels; i++)
-+  {
-+    UInt32 bit = symbol & 1;
-+    RangeEnc_EncodeBit(rc, probs + m, bit);
-+    m = (m << 1) | bit;
-+    symbol >>= 1;
-+  }
-+}
-+
-+static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  symbol |= (1 << numBitLevels);
-+  while (symbol != 1)
-+  {
-+    price += GET_PRICEa(probs[symbol >> 1], symbol & 1);
-+    symbol >>= 1;
-+  }
-+  return price;
-+}
-+
-+static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  UInt32 m = 1;
-+  int i;
-+  for (i = numBitLevels; i != 0; i--)
-+  {
-+    UInt32 bit = symbol & 1;
-+    symbol >>= 1;
-+    price += GET_PRICEa(probs[m], bit);
-+    m = (m << 1) | bit;
-+  }
-+  return price;
-+}
-+
-+
-+static void LenEnc_Init(CLenEnc *p)
-+{
-+  unsigned i;
-+  p->choice = p->choice2 = kProbInitValue;
-+  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++)
-+    p->low[i] = kProbInitValue;
-+  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++)
-+    p->mid[i] = kProbInitValue;
-+  for (i = 0; i < kLenNumHighSymbols; i++)
-+    p->high[i] = kProbInitValue;
-+}
-+
-+static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState)
-+{
-+  if (symbol < kLenNumLowSymbols)
-+  {
-+    RangeEnc_EncodeBit(rc, &p->choice, 0);
-+    RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol);
-+  }
-+  else
-+  {
-+    RangeEnc_EncodeBit(rc, &p->choice, 1);
-+    if (symbol < kLenNumLowSymbols + kLenNumMidSymbols)
-+    {
-+      RangeEnc_EncodeBit(rc, &p->choice2, 0);
-+      RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols);
-+    }
-+    else
-+    {
-+      RangeEnc_EncodeBit(rc, &p->choice2, 1);
-+      RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols);
-+    }
-+  }
-+}
-+
-+static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices)
-+{
-+  UInt32 a0 = GET_PRICE_0a(p->choice);
-+  UInt32 a1 = GET_PRICE_1a(p->choice);
-+  UInt32 b0 = a1 + GET_PRICE_0a(p->choice2);
-+  UInt32 b1 = a1 + GET_PRICE_1a(p->choice2);
-+  UInt32 i = 0;
-+  for (i = 0; i < kLenNumLowSymbols; i++)
-+  {
-+    if (i >= numSymbols)
-+      return;
-+    prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices);
-+  }
-+  for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++)
-+  {
-+    if (i >= numSymbols)
-+      return;
-+    prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices);
-+  }
-+  for (; i < numSymbols; i++)
-+    prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices);
-+}
-+
-+static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices)
-+{
-+  LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices);
-+  p->counters[posState] = p->tableSize;
-+}
-+
-+static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices)
-+{
-+  UInt32 posState;
-+  for (posState = 0; posState < numPosStates; posState++)
-+    LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices)
-+{
-+  LenEnc_Encode(&p->p, rc, symbol, posState);
-+  if (updatePrice)
-+    if (--p->counters[posState] == 0)
-+      LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+
-+
-+
-+static void MovePos(CLzmaEnc *p, UInt32 num)
-+{
-+  #ifdef SHOW_STAT
-+  ttt += num;
-+  printf("\n MovePos %d", num);
-+  #endif
-+  if (num != 0)
-+  {
-+    p->additionalOffset += num;
-+    p->matchFinder.Skip(p->matchFinderObj, num);
-+  }
-+}
-+
-+static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes)
-+{
-+  UInt32 lenRes = 0, numPairs;
-+  p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
-+  numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches);
-+  #ifdef SHOW_STAT
-+  printf("\n i = %d numPairs = %d    ", ttt, numPairs / 2);
-+  ttt++;
-+  {
-+    UInt32 i;
-+    for (i = 0; i < numPairs; i += 2)
-+      printf("%2d %6d   | ", p->matches[i], p->matches[i + 1]);
-+  }
-+  #endif
-+  if (numPairs > 0)
-+  {
-+    lenRes = p->matches[numPairs - 2];
-+    if (lenRes == p->numFastBytes)
-+    {
-+      const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+      UInt32 distance = p->matches[numPairs - 1] + 1;
-+      UInt32 numAvail = p->numAvail;
-+      if (numAvail > LZMA_MATCH_LEN_MAX)
-+        numAvail = LZMA_MATCH_LEN_MAX;
-+      {
-+        const Byte *pby2 = pby - distance;
-+        for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++);
-+      }
-+    }
-+  }
-+  p->additionalOffset++;
-+  *numDistancePairsRes = numPairs;
-+  return lenRes;
-+}
-+
-+
-+#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False;
-+#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False;
-+#define IsShortRep(p) ((p)->backPrev == 0)
-+
-+static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState)
-+{
-+  return
-+    GET_PRICE_0(p->isRepG0[state]) +
-+    GET_PRICE_0(p->isRep0Long[state][posState]);
-+}
-+
-+static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState)
-+{
-+  UInt32 price;
-+  if (repIndex == 0)
-+  {
-+    price = GET_PRICE_0(p->isRepG0[state]);
-+    price += GET_PRICE_1(p->isRep0Long[state][posState]);
-+  }
-+  else
-+  {
-+    price = GET_PRICE_1(p->isRepG0[state]);
-+    if (repIndex == 1)
-+      price += GET_PRICE_0(p->isRepG1[state]);
-+    else
-+    {
-+      price += GET_PRICE_1(p->isRepG1[state]);
-+      price += GET_PRICE(p->isRepG2[state], repIndex - 2);
-+    }
-+  }
-+  return price;
-+}
-+
-+static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState)
-+{
-+  return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] +
-+    GetPureRepPrice(p, repIndex, state, posState);
-+}
-+
-+static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur)
-+{
-+  UInt32 posMem = p->opt[cur].posPrev;
-+  UInt32 backMem = p->opt[cur].backPrev;
-+  p->optimumEndIndex = cur;
-+  do
-+  {
-+    if (p->opt[cur].prev1IsChar)
-+    {
-+      MakeAsChar(&p->opt[posMem])
-+      p->opt[posMem].posPrev = posMem - 1;
-+      if (p->opt[cur].prev2)
-+      {
-+        p->opt[posMem - 1].prev1IsChar = False;
-+        p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2;
-+        p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2;
-+      }
-+    }
-+    {
-+      UInt32 posPrev = posMem;
-+      UInt32 backCur = backMem;
-+
-+      backMem = p->opt[posPrev].backPrev;
-+      posMem = p->opt[posPrev].posPrev;
-+
-+      p->opt[posPrev].backPrev = backCur;
-+      p->opt[posPrev].posPrev = cur;
-+      cur = posPrev;
-+    }
-+  }
-+  while (cur != 0);
-+  *backRes = p->opt[0].backPrev;
-+  p->optimumCurrentIndex  = p->opt[0].posPrev;
-+  return p->optimumCurrentIndex;
-+}
-+
-+#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300)
-+
-+static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes)
-+{
-+  UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur;
-+  UInt32 matchPrice, repMatchPrice, normalMatchPrice;
-+  UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS];
-+  UInt32 *matches;
-+  const Byte *data;
-+  Byte curByte, matchByte;
-+  if (p->optimumEndIndex != p->optimumCurrentIndex)
-+  {
-+    const COptimal *opt = &p->opt[p->optimumCurrentIndex];
-+    UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex;
-+    *backRes = opt->backPrev;
-+    p->optimumCurrentIndex = opt->posPrev;
-+    return lenRes;
-+  }
-+  p->optimumCurrentIndex = p->optimumEndIndex = 0;
-+
-+  if (p->additionalOffset == 0)
-+    mainLen = ReadMatchDistances(p, &numPairs);
-+  else
-+  {
-+    mainLen = p->longestMatchLength;
-+    numPairs = p->numPairs;
-+  }
-+
-+  numAvail = p->numAvail;
-+  if (numAvail < 2)
-+  {
-+    *backRes = (UInt32)(-1);
-+    return 1;
-+  }
-+  if (numAvail > LZMA_MATCH_LEN_MAX)
-+    numAvail = LZMA_MATCH_LEN_MAX;
-+
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+  repMaxIndex = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 lenTest;
-+    const Byte *data2;
-+    reps[i] = p->reps[i];
-+    data2 = data - (reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+    {
-+      repLens[i] = 0;
-+      continue;
-+    }
-+    for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+    repLens[i] = lenTest;
-+    if (lenTest > repLens[repMaxIndex])
-+      repMaxIndex = i;
-+  }
-+  if (repLens[repMaxIndex] >= p->numFastBytes)
-+  {
-+    UInt32 lenRes;
-+    *backRes = repMaxIndex;
-+    lenRes = repLens[repMaxIndex];
-+    MovePos(p, lenRes - 1);
-+    return lenRes;
-+  }
-+
-+  matches = p->matches;
-+  if (mainLen >= p->numFastBytes)
-+  {
-+    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+    MovePos(p, mainLen - 1);
-+    return mainLen;
-+  }
-+  curByte = *data;
-+  matchByte = *(data - (reps[0] + 1));
-+
-+  if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2)
-+  {
-+    *backRes = (UInt32)-1;
-+    return 1;
-+  }
-+
-+  p->opt[0].state = (CState)p->state;
-+
-+  posState = (position & p->pbMask);
-+
-+  {
-+    const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+    p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) +
-+        (!IsCharState(p->state) ?
-+          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+  }
-+
-+  MakeAsChar(&p->opt[1]);
-+
-+  matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]);
-+  repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]);
-+
-+  if (matchByte == curByte)
-+  {
-+    UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState);
-+    if (shortRepPrice < p->opt[1].price)
-+    {
-+      p->opt[1].price = shortRepPrice;
-+      MakeAsShortRep(&p->opt[1]);
-+    }
-+  }
-+  lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]);
-+
-+  if (lenEnd < 2)
-+  {
-+    *backRes = p->opt[1].backPrev;
-+    return 1;
-+  }
-+
-+  p->opt[1].posPrev = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+    p->opt[0].backs[i] = reps[i];
-+
-+  len = lenEnd;
-+  do
-+    p->opt[len--].price = kInfinityPrice;
-+  while (len >= 2);
-+
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 repLen = repLens[i];
-+    UInt32 price;
-+    if (repLen < 2)
-+      continue;
-+    price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState);
-+    do
-+    {
-+      UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2];
-+      COptimal *opt = &p->opt[repLen];
-+      if (curAndLenPrice < opt->price)
-+      {
-+        opt->price = curAndLenPrice;
-+        opt->posPrev = 0;
-+        opt->backPrev = i;
-+        opt->prev1IsChar = False;
-+      }
-+    }
-+    while (--repLen >= 2);
-+  }
-+
-+  normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]);
-+
-+  len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2);
-+  if (len <= mainLen)
-+  {
-+    UInt32 offs = 0;
-+    while (len > matches[offs])
-+      offs += 2;
-+    for (; ; len++)
-+    {
-+      COptimal *opt;
-+      UInt32 distance = matches[offs + 1];
-+
-+      UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN];
-+      UInt32 lenToPosState = GetLenToPosState(len);
-+      if (distance < kNumFullDistances)
-+        curAndLenPrice += p->distancesPrices[lenToPosState][distance];
-+      else
-+      {
-+        UInt32 slot;
-+        GetPosSlot2(distance, slot);
-+        curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot];
-+      }
-+      opt = &p->opt[len];
-+      if (curAndLenPrice < opt->price)
-+      {
-+        opt->price = curAndLenPrice;
-+        opt->posPrev = 0;
-+        opt->backPrev = distance + LZMA_NUM_REPS;
-+        opt->prev1IsChar = False;
-+      }
-+      if (len == matches[offs])
-+      {
-+        offs += 2;
-+        if (offs == numPairs)
-+          break;
-+      }
-+    }
-+  }
-+
-+  cur = 0;
-+
-+    #ifdef SHOW_STAT2
-+    if (position >= 0)
-+    {
-+      unsigned i;
-+      printf("\n pos = %4X", position);
-+      for (i = cur; i <= lenEnd; i++)
-+      printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price);
-+    }
-+    #endif
-+
-+  for (;;)
-+  {
-+    UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen;
-+    UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice;
-+    Bool nextIsChar;
-+    Byte curByte, matchByte;
-+    const Byte *data;
-+    COptimal *curOpt;
-+    COptimal *nextOpt;
-+
-+    cur++;
-+    if (cur == lenEnd)
-+      return Backward(p, backRes, cur);
-+
-+    newLen = ReadMatchDistances(p, &numPairs);
-+    if (newLen >= p->numFastBytes)
-+    {
-+      p->numPairs = numPairs;
-+      p->longestMatchLength = newLen;
-+      return Backward(p, backRes, cur);
-+    }
-+    position++;
-+    curOpt = &p->opt[cur];
-+    posPrev = curOpt->posPrev;
-+    if (curOpt->prev1IsChar)
-+    {
-+      posPrev--;
-+      if (curOpt->prev2)
-+      {
-+        state = p->opt[curOpt->posPrev2].state;
-+        if (curOpt->backPrev2 < LZMA_NUM_REPS)
-+          state = kRepNextStates[state];
-+        else
-+          state = kMatchNextStates[state];
-+      }
-+      else
-+        state = p->opt[posPrev].state;
-+      state = kLiteralNextStates[state];
-+    }
-+    else
-+      state = p->opt[posPrev].state;
-+    if (posPrev == cur - 1)
-+    {
-+      if (IsShortRep(curOpt))
-+        state = kShortRepNextStates[state];
-+      else
-+        state = kLiteralNextStates[state];
-+    }
-+    else
-+    {
-+      UInt32 pos;
-+      const COptimal *prevOpt;
-+      if (curOpt->prev1IsChar && curOpt->prev2)
-+      {
-+        posPrev = curOpt->posPrev2;
-+        pos = curOpt->backPrev2;
-+        state = kRepNextStates[state];
-+      }
-+      else
-+      {
-+        pos = curOpt->backPrev;
-+        if (pos < LZMA_NUM_REPS)
-+          state = kRepNextStates[state];
-+        else
-+          state = kMatchNextStates[state];
-+      }
-+      prevOpt = &p->opt[posPrev];
-+      if (pos < LZMA_NUM_REPS)
-+      {
-+        UInt32 i;
-+        reps[0] = prevOpt->backs[pos];
-+        for (i = 1; i <= pos; i++)
-+          reps[i] = prevOpt->backs[i - 1];
-+        for (; i < LZMA_NUM_REPS; i++)
-+          reps[i] = prevOpt->backs[i];
-+      }
-+      else
-+      {
-+        UInt32 i;
-+        reps[0] = (pos - LZMA_NUM_REPS);
-+        for (i = 1; i < LZMA_NUM_REPS; i++)
-+          reps[i] = prevOpt->backs[i - 1];
-+      }
-+    }
-+    curOpt->state = (CState)state;
-+
-+    curOpt->backs[0] = reps[0];
-+    curOpt->backs[1] = reps[1];
-+    curOpt->backs[2] = reps[2];
-+    curOpt->backs[3] = reps[3];
-+
-+    curPrice = curOpt->price;
-+    nextIsChar = False;
-+    data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+    curByte = *data;
-+    matchByte = *(data - (reps[0] + 1));
-+
-+    posState = (position & p->pbMask);
-+
-+    curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]);
-+    {
-+      const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+      curAnd1Price +=
-+        (!IsCharState(state) ?
-+          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+    }
-+
-+    nextOpt = &p->opt[cur + 1];
-+
-+    if (curAnd1Price < nextOpt->price)
-+    {
-+      nextOpt->price = curAnd1Price;
-+      nextOpt->posPrev = cur;
-+      MakeAsChar(nextOpt);
-+      nextIsChar = True;
-+    }
-+
-+    matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]);
-+    repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]);
-+
-+    if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0))
-+    {
-+      UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState);
-+      if (shortRepPrice <= nextOpt->price)
-+      {
-+        nextOpt->price = shortRepPrice;
-+        nextOpt->posPrev = cur;
-+        MakeAsShortRep(nextOpt);
-+        nextIsChar = True;
-+      }
-+    }
-+    numAvailFull = p->numAvail;
-+    {
-+      UInt32 temp = kNumOpts - 1 - cur;
-+      if (temp < numAvailFull)
-+        numAvailFull = temp;
-+    }
-+
-+    if (numAvailFull < 2)
-+      continue;
-+    numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes);
-+
-+    if (!nextIsChar && matchByte != curByte) /* speed optimization */
-+    {
-+      /* try Literal + rep0 */
-+      UInt32 temp;
-+      UInt32 lenTest2;
-+      const Byte *data2 = data - (reps[0] + 1);
-+      UInt32 limit = p->numFastBytes + 1;
-+      if (limit > numAvailFull)
-+        limit = numAvailFull;
-+
-+      for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++);
-+      lenTest2 = temp - 1;
-+      if (lenTest2 >= 2)
-+      {
-+        UInt32 state2 = kLiteralNextStates[state];
-+        UInt32 posStateNext = (position + 1) & p->pbMask;
-+        UInt32 nextRepMatchPrice = curAnd1Price +
-+            GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+            GET_PRICE_1(p->isRep[state2]);
-+        /* for (; lenTest2 >= 2; lenTest2--) */
-+        {
-+          UInt32 curAndLenPrice;
-+          COptimal *opt;
-+          UInt32 offset = cur + 1 + lenTest2;
-+          while (lenEnd < offset)
-+            p->opt[++lenEnd].price = kInfinityPrice;
-+          curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+          opt = &p->opt[offset];
-+          if (curAndLenPrice < opt->price)
-+          {
-+            opt->price = curAndLenPrice;
-+            opt->posPrev = cur + 1;
-+            opt->backPrev = 0;
-+            opt->prev1IsChar = True;
-+            opt->prev2 = False;
-+          }
-+        }
-+      }
-+    }
-+
-+    startLen = 2; /* speed optimization */
-+    {
-+    UInt32 repIndex;
-+    for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++)
-+    {
-+      UInt32 lenTest;
-+      UInt32 lenTestTemp;
-+      UInt32 price;
-+      const Byte *data2 = data - (reps[repIndex] + 1);
-+      if (data[0] != data2[0] || data[1] != data2[1])
-+        continue;
-+      for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+      while (lenEnd < cur + lenTest)
-+        p->opt[++lenEnd].price = kInfinityPrice;
-+      lenTestTemp = lenTest;
-+      price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState);
-+      do
-+      {
-+        UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2];
-+        COptimal *opt = &p->opt[cur + lenTest];
-+        if (curAndLenPrice < opt->price)
-+        {
-+          opt->price = curAndLenPrice;
-+          opt->posPrev = cur;
-+          opt->backPrev = repIndex;
-+          opt->prev1IsChar = False;
-+        }
-+      }
-+      while (--lenTest >= 2);
-+      lenTest = lenTestTemp;
-+
-+      if (repIndex == 0)
-+        startLen = lenTest + 1;
-+
-+      /* if (_maxMode) */
-+        {
-+          UInt32 lenTest2 = lenTest + 1;
-+          UInt32 limit = lenTest2 + p->numFastBytes;
-+          UInt32 nextRepMatchPrice;
-+          if (limit > numAvailFull)
-+            limit = numAvailFull;
-+          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+          lenTest2 -= lenTest + 1;
-+          if (lenTest2 >= 2)
-+          {
-+            UInt32 state2 = kRepNextStates[state];
-+            UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+            UInt32 curAndLenCharPrice =
-+                price + p->repLenEnc.prices[posState][lenTest - 2] +
-+                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+                    data[lenTest], data2[lenTest], p->ProbPrices);
-+            state2 = kLiteralNextStates[state2];
-+            posStateNext = (position + lenTest + 1) & p->pbMask;
-+            nextRepMatchPrice = curAndLenCharPrice +
-+                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+                GET_PRICE_1(p->isRep[state2]);
-+
-+            /* for (; lenTest2 >= 2; lenTest2--) */
-+            {
-+              UInt32 curAndLenPrice;
-+              COptimal *opt;
-+              UInt32 offset = cur + lenTest + 1 + lenTest2;
-+              while (lenEnd < offset)
-+                p->opt[++lenEnd].price = kInfinityPrice;
-+              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+              opt = &p->opt[offset];
-+              if (curAndLenPrice < opt->price)
-+              {
-+                opt->price = curAndLenPrice;
-+                opt->posPrev = cur + lenTest + 1;
-+                opt->backPrev = 0;
-+                opt->prev1IsChar = True;
-+                opt->prev2 = True;
-+                opt->posPrev2 = cur;
-+                opt->backPrev2 = repIndex;
-+              }
-+            }
-+          }
-+        }
-+    }
-+    }
-+    /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */
-+    if (newLen > numAvail)
-+    {
-+      newLen = numAvail;
-+      for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2);
-+      matches[numPairs] = newLen;
-+      numPairs += 2;
-+    }
-+    if (newLen >= startLen)
-+    {
-+      UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]);
-+      UInt32 offs, curBack, posSlot;
-+      UInt32 lenTest;
-+      while (lenEnd < cur + newLen)
-+        p->opt[++lenEnd].price = kInfinityPrice;
-+
-+      offs = 0;
-+      while (startLen > matches[offs])
-+        offs += 2;
-+      curBack = matches[offs + 1];
-+      GetPosSlot2(curBack, posSlot);
-+      for (lenTest = /*2*/ startLen; ; lenTest++)
-+      {
-+        UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN];
-+        UInt32 lenToPosState = GetLenToPosState(lenTest);
-+        COptimal *opt;
-+        if (curBack < kNumFullDistances)
-+          curAndLenPrice += p->distancesPrices[lenToPosState][curBack];
-+        else
-+          curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask];
-+
-+        opt = &p->opt[cur + lenTest];
-+        if (curAndLenPrice < opt->price)
-+        {
-+          opt->price = curAndLenPrice;
-+          opt->posPrev = cur;
-+          opt->backPrev = curBack + LZMA_NUM_REPS;
-+          opt->prev1IsChar = False;
-+        }
-+
-+        if (/*_maxMode && */lenTest == matches[offs])
-+        {
-+          /* Try Match + Literal + Rep0 */
-+          const Byte *data2 = data - (curBack + 1);
-+          UInt32 lenTest2 = lenTest + 1;
-+          UInt32 limit = lenTest2 + p->numFastBytes;
-+          UInt32 nextRepMatchPrice;
-+          if (limit > numAvailFull)
-+            limit = numAvailFull;
-+          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+          lenTest2 -= lenTest + 1;
-+          if (lenTest2 >= 2)
-+          {
-+            UInt32 state2 = kMatchNextStates[state];
-+            UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+            UInt32 curAndLenCharPrice = curAndLenPrice +
-+                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+                    data[lenTest], data2[lenTest], p->ProbPrices);
-+            state2 = kLiteralNextStates[state2];
-+            posStateNext = (posStateNext + 1) & p->pbMask;
-+            nextRepMatchPrice = curAndLenCharPrice +
-+                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+                GET_PRICE_1(p->isRep[state2]);
-+
-+            /* for (; lenTest2 >= 2; lenTest2--) */
-+            {
-+              UInt32 offset = cur + lenTest + 1 + lenTest2;
-+              UInt32 curAndLenPrice;
-+              COptimal *opt;
-+              while (lenEnd < offset)
-+                p->opt[++lenEnd].price = kInfinityPrice;
-+              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+              opt = &p->opt[offset];
-+              if (curAndLenPrice < opt->price)
-+              {
-+                opt->price = curAndLenPrice;
-+                opt->posPrev = cur + lenTest + 1;
-+                opt->backPrev = 0;
-+                opt->prev1IsChar = True;
-+                opt->prev2 = True;
-+                opt->posPrev2 = cur;
-+                opt->backPrev2 = curBack + LZMA_NUM_REPS;
-+              }
-+            }
-+          }
-+          offs += 2;
-+          if (offs == numPairs)
-+            break;
-+          curBack = matches[offs + 1];
-+          if (curBack >= kNumFullDistances)
-+            GetPosSlot2(curBack, posSlot);
-+        }
-+      }
-+    }
-+  }
-+}
-+
-+#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist))
-+
-+static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes)
-+{
-+  UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i;
-+  const Byte *data;
-+  const UInt32 *matches;
-+
-+  if (p->additionalOffset == 0)
-+    mainLen = ReadMatchDistances(p, &numPairs);
-+  else
-+  {
-+    mainLen = p->longestMatchLength;
-+    numPairs = p->numPairs;
-+  }
-+
-+  numAvail = p->numAvail;
-+  *backRes = (UInt32)-1;
-+  if (numAvail < 2)
-+    return 1;
-+  if (numAvail > LZMA_MATCH_LEN_MAX)
-+    numAvail = LZMA_MATCH_LEN_MAX;
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+
-+  repLen = repIndex = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 len;
-+    const Byte *data2 = data - (p->reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+      continue;
-+    for (len = 2; len < numAvail && data[len] == data2[len]; len++);
-+    if (len >= p->numFastBytes)
-+    {
-+      *backRes = i;
-+      MovePos(p, len - 1);
-+      return len;
-+    }
-+    if (len > repLen)
-+    {
-+      repIndex = i;
-+      repLen = len;
-+    }
-+  }
-+
-+  matches = p->matches;
-+  if (mainLen >= p->numFastBytes)
-+  {
-+    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+    MovePos(p, mainLen - 1);
-+    return mainLen;
-+  }
-+
-+  mainDist = 0; /* for GCC */
-+  if (mainLen >= 2)
-+  {
-+    mainDist = matches[numPairs - 1];
-+    while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1)
-+    {
-+      if (!ChangePair(matches[numPairs - 3], mainDist))
-+        break;
-+      numPairs -= 2;
-+      mainLen = matches[numPairs - 2];
-+      mainDist = matches[numPairs - 1];
-+    }
-+    if (mainLen == 2 && mainDist >= 0x80)
-+      mainLen = 1;
-+  }
-+
-+  if (repLen >= 2 && (
-+        (repLen + 1 >= mainLen) ||
-+        (repLen + 2 >= mainLen && mainDist >= (1 << 9)) ||
-+        (repLen + 3 >= mainLen && mainDist >= (1 << 15))))
-+  {
-+    *backRes = repIndex;
-+    MovePos(p, repLen - 1);
-+    return repLen;
-+  }
-+
-+  if (mainLen < 2 || numAvail <= 2)
-+    return 1;
-+
-+  p->longestMatchLength = ReadMatchDistances(p, &p->numPairs);
-+  if (p->longestMatchLength >= 2)
-+  {
-+    UInt32 newDistance = matches[p->numPairs - 1];
-+    if ((p->longestMatchLength >= mainLen && newDistance < mainDist) ||
-+        (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) ||
-+        (p->longestMatchLength > mainLen + 1) ||
-+        (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist)))
-+      return 1;
-+  }
-+
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 len, limit;
-+    const Byte *data2 = data - (p->reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+      continue;
-+    limit = mainLen - 1;
-+    for (len = 2; len < limit && data[len] == data2[len]; len++);
-+    if (len >= limit)
-+      return 1;
-+  }
-+  *backRes = mainDist + LZMA_NUM_REPS;
-+  MovePos(p, mainLen - 2);
-+  return mainLen;
-+}
-+
-+static void WriteEndMarker(CLzmaEnc *p, UInt32 posState)
-+{
-+  UInt32 len;
-+  RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+  RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+  p->state = kMatchNextStates[p->state];
-+  len = LZMA_MATCH_LEN_MIN;
-+  LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+  RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1);
-+  RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits);
-+  RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask);
-+}
-+
-+static SRes CheckErrors(CLzmaEnc *p)
-+{
-+  if (p->result != SZ_OK)
-+    return p->result;
-+  if (p->rc.res != SZ_OK)
-+    p->result = SZ_ERROR_WRITE;
-+  if (p->matchFinderBase.result != SZ_OK)
-+    p->result = SZ_ERROR_READ;
-+  if (p->result != SZ_OK)
-+    p->finished = True;
-+  return p->result;
-+}
-+
-+static SRes Flush(CLzmaEnc *p, UInt32 nowPos)
-+{
-+  /* ReleaseMFStream(); */
-+  p->finished = True;
-+  if (p->writeEndMark)
-+    WriteEndMarker(p, nowPos & p->pbMask);
-+  RangeEnc_FlushData(&p->rc);
-+  RangeEnc_FlushStream(&p->rc);
-+  return CheckErrors(p);
-+}
-+
-+static void FillAlignPrices(CLzmaEnc *p)
-+{
-+  UInt32 i;
-+  for (i = 0; i < kAlignTableSize; i++)
-+    p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices);
-+  p->alignPriceCount = 0;
-+}
-+
-+static void FillDistancesPrices(CLzmaEnc *p)
-+{
-+  UInt32 tempPrices[kNumFullDistances];
-+  UInt32 i, lenToPosState;
-+  for (i = kStartPosModelIndex; i < kNumFullDistances; i++)
-+  {
-+    UInt32 posSlot = GetPosSlot1(i);
-+    UInt32 footerBits = ((posSlot >> 1) - 1);
-+    UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+    tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices);
-+  }
-+
-+  for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++)
-+  {
-+    UInt32 posSlot;
-+    const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState];
-+    UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState];
-+    for (posSlot = 0; posSlot < p->distTableSize; posSlot++)
-+      posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices);
-+    for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++)
-+      posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits);
-+
-+    {
-+      UInt32 *distancesPrices = p->distancesPrices[lenToPosState];
-+      UInt32 i;
-+      for (i = 0; i < kStartPosModelIndex; i++)
-+        distancesPrices[i] = posSlotPrices[i];
-+      for (; i < kNumFullDistances; i++)
-+        distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i];
-+    }
-+  }
-+  p->matchPriceCount = 0;
-+}
-+
-+void LzmaEnc_Construct(CLzmaEnc *p)
-+{
-+  RangeEnc_Construct(&p->rc);
-+  MatchFinder_Construct(&p->matchFinderBase);
-+  #ifndef _7ZIP_ST
-+  MatchFinderMt_Construct(&p->matchFinderMt);
-+  p->matchFinderMt.MatchFinder = &p->matchFinderBase;
-+  #endif
-+
-+  {
-+    CLzmaEncProps props;
-+    LzmaEncProps_Init(&props);
-+    LzmaEnc_SetProps(p, &props);
-+  }
-+
-+  #ifndef LZMA_LOG_BSR
-+  LzmaEnc_FastPosInit(p->g_FastPos);
-+  #endif
-+
-+  LzmaEnc_InitPriceTables(p->ProbPrices);
-+  p->litProbs = 0;
-+  p->saveState.litProbs = 0;
-+}
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc)
-+{
-+  void *p;
-+  p = alloc->Alloc(alloc, sizeof(CLzmaEnc));
-+  if (p != 0)
-+    LzmaEnc_Construct((CLzmaEnc *)p);
-+  return p;
-+}
-+
-+void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->litProbs);
-+  alloc->Free(alloc, p->saveState.litProbs);
-+  p->litProbs = 0;
-+  p->saveState.litProbs = 0;
-+}
-+
-+void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  #ifndef _7ZIP_ST
-+  MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
-+  #endif
-+  MatchFinder_Free(&p->matchFinderBase, allocBig);
-+  LzmaEnc_FreeLits(p, alloc);
-+  RangeEnc_Free(&p->rc, alloc);
-+}
-+
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig);
-+  alloc->Free(alloc, p);
-+}
-+
-+static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize)
-+{
-+  UInt32 nowPos32, startPos32;
-+  if (p->needInit)
-+  {
-+    p->matchFinder.Init(p->matchFinderObj);
-+    p->needInit = 0;
-+  }
-+
-+  if (p->finished)
-+    return p->result;
-+  RINOK(CheckErrors(p));
-+
-+  nowPos32 = (UInt32)p->nowPos64;
-+  startPos32 = nowPos32;
-+
-+  if (p->nowPos64 == 0)
-+  {
-+    UInt32 numPairs;
-+    Byte curByte;
-+    if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+      return Flush(p, nowPos32);
-+    ReadMatchDistances(p, &numPairs);
-+    RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0);
-+    p->state = kLiteralNextStates[p->state];
-+    curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset);
-+    LitEnc_Encode(&p->rc, p->litProbs, curByte);
-+    p->additionalOffset--;
-+    nowPos32++;
-+  }
-+
-+  if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0)
-+  for (;;)
-+  {
-+    UInt32 pos, len, posState;
-+
-+    if (p->fastMode)
-+      len = GetOptimumFast(p, &pos);
-+    else
-+      len = GetOptimum(p, nowPos32, &pos);
-+
-+    #ifdef SHOW_STAT2
-+    printf("\n pos = %4X,   len = %d   pos = %d", nowPos32, len, pos);
-+    #endif
-+
-+    posState = nowPos32 & p->pbMask;
-+    if (len == 1 && pos == (UInt32)-1)
-+    {
-+      Byte curByte;
-+      CLzmaProb *probs;
-+      const Byte *data;
-+
-+      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0);
-+      data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
-+      curByte = *data;
-+      probs = LIT_PROBS(nowPos32, *(data - 1));
-+      if (IsCharState(p->state))
-+        LitEnc_Encode(&p->rc, probs, curByte);
-+      else
-+        LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1));
-+      p->state = kLiteralNextStates[p->state];
-+    }
-+    else
-+    {
-+      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+      if (pos < LZMA_NUM_REPS)
-+      {
-+        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1);
-+        if (pos == 0)
-+        {
-+          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0);
-+          RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1));
-+        }
-+        else
-+        {
-+          UInt32 distance = p->reps[pos];
-+          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1);
-+          if (pos == 1)
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0);
-+          else
-+          {
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1);
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2);
-+            if (pos == 3)
-+              p->reps[3] = p->reps[2];
-+            p->reps[2] = p->reps[1];
-+          }
-+          p->reps[1] = p->reps[0];
-+          p->reps[0] = distance;
-+        }
-+        if (len == 1)
-+          p->state = kShortRepNextStates[p->state];
-+        else
-+        {
-+          LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+          p->state = kRepNextStates[p->state];
-+        }
-+      }
-+      else
-+      {
-+        UInt32 posSlot;
-+        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+        p->state = kMatchNextStates[p->state];
-+        LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+        pos -= LZMA_NUM_REPS;
-+        GetPosSlot(pos, posSlot);
-+        RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot);
-+
-+        if (posSlot >= kStartPosModelIndex)
-+        {
-+          UInt32 footerBits = ((posSlot >> 1) - 1);
-+          UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+          UInt32 posReduced = pos - base;
-+
-+          if (posSlot < kEndPosModelIndex)
-+            RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced);
-+          else
-+          {
-+            RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits);
-+            RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask);
-+            p->alignPriceCount++;
-+          }
-+        }
-+        p->reps[3] = p->reps[2];
-+        p->reps[2] = p->reps[1];
-+        p->reps[1] = p->reps[0];
-+        p->reps[0] = pos;
-+        p->matchPriceCount++;
-+      }
-+    }
-+    p->additionalOffset -= len;
-+    nowPos32 += len;
-+    if (p->additionalOffset == 0)
-+    {
-+      UInt32 processed;
-+      if (!p->fastMode)
-+      {
-+        if (p->matchPriceCount >= (1 << 7))
-+          FillDistancesPrices(p);
-+        if (p->alignPriceCount >= kAlignTableSize)
-+          FillAlignPrices(p);
-+      }
-+      if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+        break;
-+      processed = nowPos32 - startPos32;
-+      if (useLimits)
-+      {
-+        if (processed + kNumOpts + 300 >= maxUnpackSize ||
-+            RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize)
-+          break;
-+      }
-+      else if (processed >= (1 << 15))
-+      {
-+        p->nowPos64 += nowPos32 - startPos32;
-+        return CheckErrors(p);
-+      }
-+    }
-+  }
-+  p->nowPos64 += nowPos32 - startPos32;
-+  return Flush(p, nowPos32);
-+}
-+
-+#define kBigHashDicLimit ((UInt32)1 << 24)
-+
-+static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  UInt32 beforeSize = kNumOpts;
-+  Bool btMode;
-+  if (!RangeEnc_Alloc(&p->rc, alloc))
-+    return SZ_ERROR_MEM;
-+  btMode = (p->matchFinderBase.btMode != 0);
-+  #ifndef _7ZIP_ST
-+  p->mtMode = (p->multiThread && !p->fastMode && btMode);
-+  #endif
-+
-+  {
-+    unsigned lclp = p->lc + p->lp;
-+    if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp)
-+    {
-+      LzmaEnc_FreeLits(p, alloc);
-+      p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+      p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+      if (p->litProbs == 0 || p->saveState.litProbs == 0)
-+      {
-+        LzmaEnc_FreeLits(p, alloc);
-+        return SZ_ERROR_MEM;
-+      }
-+      p->lclp = lclp;
-+    }
-+  }
-+
-+  p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit);
-+
-+  if (beforeSize + p->dictSize < keepWindowSize)
-+    beforeSize = keepWindowSize - p->dictSize;
-+
-+  #ifndef _7ZIP_ST
-+  if (p->mtMode)
-+  {
-+    RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig));
-+    p->matchFinderObj = &p->matchFinderMt;
-+    MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder);
-+  }
-+  else
-+  #endif
-+  {
-+    if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig))
-+      return SZ_ERROR_MEM;
-+    p->matchFinderObj = &p->matchFinderBase;
-+    MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder);
-+  }
-+  return SZ_OK;
-+}
-+
-+void LzmaEnc_Init(CLzmaEnc *p)
-+{
-+  UInt32 i;
-+  p->state = 0;
-+  for (i = 0 ; i < LZMA_NUM_REPS; i++)
-+    p->reps[i] = 0;
-+
-+  RangeEnc_Init(&p->rc);
-+
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    UInt32 j;
-+    for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++)
-+    {
-+      p->isMatch[i][j] = kProbInitValue;
-+      p->isRep0Long[i][j] = kProbInitValue;
-+    }
-+    p->isRep[i] = kProbInitValue;
-+    p->isRepG0[i] = kProbInitValue;
-+    p->isRepG1[i] = kProbInitValue;
-+    p->isRepG2[i] = kProbInitValue;
-+  }
-+
-+  {
-+    UInt32 num = 0x300 << (p->lp + p->lc);
-+    for (i = 0; i < num; i++)
-+      p->litProbs[i] = kProbInitValue;
-+  }
-+
-+  {
-+    for (i = 0; i < kNumLenToPosStates; i++)
-+    {
-+      CLzmaProb *probs = p->posSlotEncoder[i];
-+      UInt32 j;
-+      for (j = 0; j < (1 << kNumPosSlotBits); j++)
-+        probs[j] = kProbInitValue;
-+    }
-+  }
-+  {
-+    for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++)
-+      p->posEncoders[i] = kProbInitValue;
-+  }
-+
-+  LenEnc_Init(&p->lenEnc.p);
-+  LenEnc_Init(&p->repLenEnc.p);
-+
-+  for (i = 0; i < (1 << kNumAlignBits); i++)
-+    p->posAlignEncoder[i] = kProbInitValue;
-+
-+  p->optimumEndIndex = 0;
-+  p->optimumCurrentIndex = 0;
-+  p->additionalOffset = 0;
-+
-+  p->pbMask = (1 << p->pb) - 1;
-+  p->lpMask = (1 << p->lp) - 1;
-+}
-+
-+void LzmaEnc_InitPrices(CLzmaEnc *p)
-+{
-+  if (!p->fastMode)
-+  {
-+    FillDistancesPrices(p);
-+    FillAlignPrices(p);
-+  }
-+
-+  p->lenEnc.tableSize =
-+  p->repLenEnc.tableSize =
-+      p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN;
-+  LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices);
-+  LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices);
-+}
-+
-+static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  UInt32 i;
-+  for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++)
-+    if (p->dictSize <= ((UInt32)1 << i))
-+      break;
-+  p->distTableSize = i * 2;
-+
-+  p->finished = False;
-+  p->result = SZ_OK;
-+  RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig));
-+  LzmaEnc_Init(p);
-+  LzmaEnc_InitPrices(p);
-+  p->nowPos64 = 0;
-+  return SZ_OK;
-+}
-+
-+static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
-+    ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  p->matchFinderBase.stream = inStream;
-+  p->needInit = 1;
-+  p->rc.outStream = outStream;
-+  return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
-+}
-+
-+SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
-+    ISeqInStream *inStream, UInt32 keepWindowSize,
-+    ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  p->matchFinderBase.stream = inStream;
-+  p->needInit = 1;
-+  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
-+}
-+
-+static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
-+{
-+  p->matchFinderBase.directInput = 1;
-+  p->matchFinderBase.bufferBase = (Byte *)src;
-+  p->matchFinderBase.directInputRem = srcLen;
-+}
-+
-+SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-+    UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  LzmaEnc_SetInputBuf(p, src, srcLen);
-+  p->needInit = 1;
-+
-+  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
-+}
-+
-+void LzmaEnc_Finish(CLzmaEncHandle pp)
-+{
-+  #ifndef _7ZIP_ST
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  if (p->mtMode)
-+    MatchFinderMt_ReleaseStream(&p->matchFinderMt);
-+  #else
-+  pp = pp;
-+  #endif
-+}
-+
-+typedef struct
-+{
-+  ISeqOutStream funcTable;
-+  Byte *data;
-+  SizeT rem;
-+  Bool overflow;
-+} CSeqOutStreamBuf;
-+
-+static size_t MyWrite(void *pp, const void *data, size_t size)
-+{
-+  CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp;
-+  if (p->rem < size)
-+  {
-+    size = p->rem;
-+    p->overflow = True;
-+  }
-+  memcpy(p->data, data, size);
-+  p->rem -= size;
-+  p->data += size;
-+  return size;
-+}
-+
-+
-+UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
-+{
-+  const CLzmaEnc *p = (CLzmaEnc *)pp;
-+  return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
-+}
-+
-+const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
-+{
-+  const CLzmaEnc *p = (CLzmaEnc *)pp;
-+  return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
-+}
-+
-+SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
-+    Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  UInt64 nowPos64;
-+  SRes res;
-+  CSeqOutStreamBuf outStream;
-+
-+  outStream.funcTable.Write = MyWrite;
-+  outStream.data = dest;
-+  outStream.rem = *destLen;
-+  outStream.overflow = False;
-+
-+  p->writeEndMark = False;
-+  p->finished = False;
-+  p->result = SZ_OK;
-+
-+  if (reInit)
-+    LzmaEnc_Init(p);
-+  LzmaEnc_InitPrices(p);
-+  nowPos64 = p->nowPos64;
-+  RangeEnc_Init(&p->rc);
-+  p->rc.outStream = &outStream.funcTable;
-+
-+  res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
-+
-+  *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
-+  *destLen -= outStream.rem;
-+  if (outStream.overflow)
-+    return SZ_ERROR_OUTPUT_EOF;
-+
-+  return res;
-+}
-+
-+static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
-+{
-+  SRes res = SZ_OK;
-+
-+  #ifndef _7ZIP_ST
-+  Byte allocaDummy[0x300];
-+  int i = 0;
-+  for (i = 0; i < 16; i++)
-+    allocaDummy[i] = (Byte)i;
-+  #endif
-+
-+  for (;;)
-+  {
-+    res = LzmaEnc_CodeOneBlock(p, False, 0, 0);
-+    if (res != SZ_OK || p->finished != 0)
-+      break;
-+    if (progress != 0)
-+    {
-+      res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc));
-+      if (res != SZ_OK)
-+      {
-+        res = SZ_ERROR_PROGRESS;
-+        break;
-+      }
-+    }
-+  }
-+  LzmaEnc_Finish(p);
-+  return res;
-+}
-+
-+SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
-+    ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
-+  return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
-+}
-+
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  int i;
-+  UInt32 dictSize = p->dictSize;
-+  if (*size < LZMA_PROPS_SIZE)
-+    return SZ_ERROR_PARAM;
-+  *size = LZMA_PROPS_SIZE;
-+  props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc);
-+
-+  for (i = 11; i <= 30; i++)
-+  {
-+    if (dictSize <= ((UInt32)2 << i))
-+    {
-+      dictSize = (2 << i);
-+      break;
-+    }
-+    if (dictSize <= ((UInt32)3 << i))
-+    {
-+      dictSize = (3 << i);
-+      break;
-+    }
-+  }
-+
-+  for (i = 0; i < 4; i++)
-+    props[1 + i] = (Byte)(dictSize >> (8 * i));
-+  return SZ_OK;
-+}
-+
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  SRes res;
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+
-+  CSeqOutStreamBuf outStream;
-+
-+  LzmaEnc_SetInputBuf(p, src, srcLen);
-+
-+  outStream.funcTable.Write = MyWrite;
-+  outStream.data = dest;
-+  outStream.rem = *destLen;
-+  outStream.overflow = False;
-+
-+  p->writeEndMark = writeEndMark;
-+
-+  p->rc.outStream = &outStream.funcTable;
-+  res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig);
-+  if (res == SZ_OK)
-+    res = LzmaEnc_Encode2(p, progress);
-+
-+  *destLen -= outStream.rem;
-+  if (outStream.overflow)
-+    return SZ_ERROR_OUTPUT_EOF;
-+  return res;
-+}
-+
-+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
-+  SRes res;
-+  if (p == 0)
-+    return SZ_ERROR_MEM;
-+
-+  res = LzmaEnc_SetProps(p, props);
-+  if (res == SZ_OK)
-+  {
-+    res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
-+    if (res == SZ_OK)
-+      res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
-+          writeEndMark, progress, alloc, allocBig);
-+  }
-+
-+  LzmaEnc_Destroy(p, alloc, allocBig);
-+  return res;
-+}
---- /dev/null
-+++ b/lib/lzma/Makefile
-@@ -0,0 +1,7 @@
-+lzma_compress-objs := LzFind.o LzmaEnc.o
-+lzma_decompress-objs := LzmaDec.o
-+
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o
-+
-+EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h
diff --git a/target/linux/generic/pending-5.4/532-jffs2_eofdetect.patch b/target/linux/generic/pending-5.4/532-jffs2_eofdetect.patch
deleted file mode 100644
index df4ab9b754..0000000000
--- a/target/linux/generic/pending-5.4/532-jffs2_eofdetect.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: fs: jffs2: EOF marker
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- fs/jffs2/build.c | 10 ++++++++++
- fs/jffs2/scan.c  | 21 +++++++++++++++++++--
- 2 files changed, 29 insertions(+), 2 deletions(-)
-
---- a/fs/jffs2/build.c
-+++ b/fs/jffs2/build.c
-@@ -117,6 +117,16 @@ static int jffs2_build_filesystem(struct
- 	dbg_fsbuild("scanned flash completely\n");
- 	jffs2_dbg_dump_block_lists_nolock(c);
- 
-+	if (c->flags & (1 << 7)) {
-+		printk("%s(): unlocking the mtd device... ", __func__);
-+		mtd_unlock(c->mtd, 0, c->mtd->size);
-+		printk("done.\n");
-+
-+		printk("%s(): erasing all blocks after the end marker... ", __func__);
-+		jffs2_erase_pending_blocks(c, -1);
-+		printk("done.\n");
-+	}
-+
- 	dbg_fsbuild("pass 1 starting\n");
- 	c->flags |= JFFS2_SB_FLAG_BUILDING;
- 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
---- a/fs/jffs2/scan.c
-+++ b/fs/jffs2/scan.c
-@@ -148,8 +148,14 @@ int jffs2_scan_medium(struct jffs2_sb_in
- 		/* reset summary info for next eraseblock scan */
- 		jffs2_sum_reset_collected(s);
- 
--		ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
--						buf_size, s);
-+		if (c->flags & (1 << 7)) {
-+			if (mtd_block_isbad(c->mtd, jeb->offset))
-+				ret = BLK_STATE_BADBLOCK;
-+			else
-+				ret = BLK_STATE_ALLFF;
-+		} else
-+			ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
-+							buf_size, s);
- 
- 		if (ret < 0)
- 			goto out;
-@@ -564,6 +570,17 @@ full_scan:
- 			return err;
- 	}
- 
-+	if ((buf[0] == 0xde) &&
-+		(buf[1] == 0xad) &&
-+		(buf[2] == 0xc0) &&
-+		(buf[3] == 0xde)) {
-+		/* end of filesystem. erase everything after this point */
-+		printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
-+		c->flags |= (1 << 7);
-+
-+		return BLK_STATE_ALLFF;
-+	}
-+
- 	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
- 	ofs = 0;
- 	max_ofs = EMPTY_SCAN_SIZE(c->sector_size);
diff --git a/target/linux/generic/pending-5.4/600-netfilter_conntrack_flush.patch b/target/linux/generic/pending-5.4/600-netfilter_conntrack_flush.patch
deleted file mode 100644
index eaf8c78052..0000000000
--- a/target/linux/generic/pending-5.4/600-netfilter_conntrack_flush.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: add support for flushing conntrack via /proc
-
-lede-commit 8193bbe59a74d34d6a26d4a8cb857b1952905314
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/nf_conntrack_standalone.c | 59 ++++++++++++++++++++++++++++++++-
- 1 file changed, 58 insertions(+), 1 deletion(-)
-
---- a/net/netfilter/nf_conntrack_standalone.c
-+++ b/net/netfilter/nf_conntrack_standalone.c
-@@ -9,6 +9,7 @@
- #include <linux/percpu.h>
- #include <linux/netdevice.h>
- #include <linux/security.h>
-+#include <linux/inet.h>
- #include <net/net_namespace.h>
- #ifdef CONFIG_SYSCTL
- #include <linux/sysctl.h>
-@@ -455,6 +456,56 @@ static int ct_cpu_seq_show(struct seq_fi
- 	return 0;
- }
- 
-+struct kill_request {
-+	u16 family;
-+	union nf_inet_addr addr;
-+};
-+
-+static int kill_matching(struct nf_conn *i, void *data)
-+{
-+	struct kill_request *kr = data;
-+	struct nf_conntrack_tuple *t1 = &i->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-+	struct nf_conntrack_tuple *t2 = &i->tuplehash[IP_CT_DIR_REPLY].tuple;
-+
-+	if (!kr->family)
-+		return 1;
-+
-+	if (t1->src.l3num != kr->family)
-+		return 0;
-+
-+	return (nf_inet_addr_cmp(&kr->addr, &t1->src.u3) ||
-+	        nf_inet_addr_cmp(&kr->addr, &t1->dst.u3) ||
-+	        nf_inet_addr_cmp(&kr->addr, &t2->src.u3) ||
-+	        nf_inet_addr_cmp(&kr->addr, &t2->dst.u3));
-+}
-+
-+static int ct_file_write(struct file *file, char *buf, size_t count)
-+{
-+	struct seq_file *seq = file->private_data;
-+	struct net *net = seq_file_net(seq);
-+	struct kill_request kr = { };
-+
-+	if (count == 0)
-+		return 0;
-+
-+	if (count >= INET6_ADDRSTRLEN)
-+		count = INET6_ADDRSTRLEN - 1;
-+
-+	if (strnchr(buf, count, ':')) {
-+		kr.family = AF_INET6;
-+		if (!in6_pton(buf, count, (void *)&kr.addr, '\n', NULL))
-+			return -EINVAL;
-+	} else if (strnchr(buf, count, '.')) {
-+		kr.family = AF_INET;
-+		if (!in4_pton(buf, count, (void *)&kr.addr, '\n', NULL))
-+			return -EINVAL;
-+	}
-+
-+	nf_ct_iterate_cleanup_net(net, kill_matching, &kr, 0, 0);
-+
-+	return 0;
-+}
-+
- static const struct seq_operations ct_cpu_seq_ops = {
- 	.start	= ct_cpu_seq_start,
- 	.next	= ct_cpu_seq_next,
-@@ -468,8 +519,9 @@ static int nf_conntrack_standalone_init_
- 	kuid_t root_uid;
- 	kgid_t root_gid;
- 
--	pde = proc_create_net("nf_conntrack", 0440, net->proc_net, &ct_seq_ops,
--			sizeof(struct ct_iter_state));
-+	pde = proc_create_net_data_write("nf_conntrack", 0440, net->proc_net,
-+					 &ct_seq_ops, &ct_file_write,
-+					 sizeof(struct ct_iter_state), NULL);
- 	if (!pde)
- 		goto out_nf_conntrack;
- 
diff --git a/target/linux/generic/pending-5.4/610-netfilter_match_bypass_default_checks.patch b/target/linux/generic/pending-5.4/610-netfilter_match_bypass_default_checks.patch
deleted file mode 100644
index 703ac8215e..0000000000
--- a/target/linux/generic/pending-5.4/610-netfilter_match_bypass_default_checks.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/netfilter_ipv4/ip_tables.h |  1 +
- net/ipv4/netfilter/ip_tables.c                | 37 +++++++++++++++++++++++++++
- 2 files changed, 38 insertions(+)
-
---- a/include/uapi/linux/netfilter_ipv4/ip_tables.h
-+++ b/include/uapi/linux/netfilter_ipv4/ip_tables.h
-@@ -89,6 +89,7 @@ struct ipt_ip {
- #define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
- #define IPT_F_GOTO		0x02	/* Set if jump is a goto */
- #define IPT_F_MASK		0x03	/* All possible flag bits mask. */
-+#define IPT_F_NO_DEF_MATCH	0x80	/* Internal: no default match rules present */
- 
- /* Values for "inv" field in struct ipt_ip. */
- #define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -50,6 +50,9 @@ ip_packet_match(const struct iphdr *ip,
- {
- 	unsigned long ret;
- 
-+	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
-+		return true;
-+
- 	if (NF_INVF(ipinfo, IPT_INV_SRCIP,
- 		    (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
- 	    NF_INVF(ipinfo, IPT_INV_DSTIP,
-@@ -80,6 +83,29 @@ ip_packet_match(const struct iphdr *ip,
- 	return true;
- }
- 
-+static void
-+ip_checkdefault(struct ipt_ip *ip)
-+{
-+	static const char iface_mask[IFNAMSIZ] = {};
-+
-+	if (ip->invflags || ip->flags & IPT_F_FRAG)
-+		return;
-+
-+	if (memcmp(ip->iniface_mask, iface_mask, IFNAMSIZ) != 0)
-+		return;
-+
-+	if (memcmp(ip->outiface_mask, iface_mask, IFNAMSIZ) != 0)
-+		return;
-+
-+	if (ip->smsk.s_addr || ip->dmsk.s_addr)
-+		return;
-+
-+	if (ip->proto)
-+		return;
-+
-+	ip->flags |= IPT_F_NO_DEF_MATCH;
-+}
-+
- static bool
- ip_checkentry(const struct ipt_ip *ip)
- {
-@@ -524,6 +550,8 @@ find_check_entry(struct ipt_entry *e, st
- 	struct xt_mtchk_param mtpar;
- 	struct xt_entry_match *ematch;
- 
-+	ip_checkdefault(&e->ip);
-+
- 	if (!xt_percpu_counter_alloc(alloc_state, &e->counters))
- 		return -ENOMEM;
- 
-@@ -818,6 +846,7 @@ copy_entries_to_user(unsigned int total_
- 	const struct xt_table_info *private = table->private;
- 	int ret = 0;
- 	const void *loc_cpu_entry;
-+	u8 flags;
- 
- 	counters = alloc_counters(table);
- 	if (IS_ERR(counters))
-@@ -845,6 +874,14 @@ copy_entries_to_user(unsigned int total_
- 			goto free_counters;
- 		}
- 
-+		flags = e->ip.flags & IPT_F_MASK;
-+		if (copy_to_user(userptr + off
-+				 + offsetof(struct ipt_entry, ip.flags),
-+				 &flags, sizeof(flags)) != 0) {
-+			ret = -EFAULT;
-+			goto free_counters;
-+		}
-+
- 		for (i = sizeof(struct ipt_entry);
- 		     i < e->target_offset;
- 		     i += m->u.match_size) {
-@@ -1225,12 +1262,15 @@ compat_copy_entry_to_user(struct ipt_ent
- 	compat_uint_t origsize;
- 	const struct xt_entry_match *ematch;
- 	int ret = 0;
-+	u8 flags = e->ip.flags & IPT_F_MASK;
- 
- 	origsize = *size;
- 	ce = *dstptr;
- 	if (copy_to_user(ce, e, sizeof(struct ipt_entry)) != 0 ||
- 	    copy_to_user(&ce->counters, &counters[i],
--	    sizeof(counters[i])) != 0)
-+	    sizeof(counters[i])) != 0 ||
-+	    copy_to_user(&ce->ip.flags, &flags,
-+	    sizeof(flags)) != 0)
- 		return -EFAULT;
- 
- 	*dstptr += sizeof(struct compat_ipt_entry);
diff --git a/target/linux/generic/pending-5.4/611-netfilter_match_bypass_default_table.patch b/target/linux/generic/pending-5.4/611-netfilter_match_bypass_default_table.patch
deleted file mode 100644
index baf738a8d2..0000000000
--- a/target/linux/generic/pending-5.4/611-netfilter_match_bypass_default_table.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: match bypass default table
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/ipv4/netfilter/ip_tables.c | 79 +++++++++++++++++++++++++++++++-----------
- 1 file changed, 58 insertions(+), 21 deletions(-)
-
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -246,6 +246,33 @@ struct ipt_entry *ipt_next_entry(const s
- 	return (void *)entry + entry->next_offset;
- }
- 
-+static bool
-+ipt_handle_default_rule(struct ipt_entry *e, unsigned int *verdict)
-+{
-+	struct xt_entry_target *t;
-+	struct xt_standard_target *st;
-+
-+	if (e->target_offset != sizeof(struct ipt_entry))
-+		return false;
-+
-+	if (!(e->ip.flags & IPT_F_NO_DEF_MATCH))
-+		return false;
-+
-+	t = ipt_get_target(e);
-+	if (t->u.kernel.target->target)
-+		return false;
-+
-+	st = (struct xt_standard_target *) t;
-+	if (st->verdict == XT_RETURN)
-+		return false;
-+
-+	if (st->verdict >= 0)
-+		return false;
-+
-+	*verdict = (unsigned)(-st->verdict) - 1;
-+	return true;
-+}
-+
- /* Returns one of the generic firewall policies, like NF_ACCEPT. */
- unsigned int
- ipt_do_table(struct sk_buff *skb,
-@@ -266,27 +293,28 @@ ipt_do_table(struct sk_buff *skb,
- 	unsigned int addend;
- 
- 	/* Initialization */
-+	WARN_ON(!(table->valid_hooks & (1 << hook)));
-+	local_bh_disable();
-+	private = READ_ONCE(table->private); /* Address dependency. */
-+	cpu        = smp_processor_id();
-+	table_base = private->entries;
-+
-+	e = get_entry(table_base, private->hook_entry[hook]);
-+	if (ipt_handle_default_rule(e, &verdict)) {
-+		struct xt_counters *counter;
-+
-+		counter = xt_get_this_cpu_counter(&e->counters);
-+		ADD_COUNTER(*counter, skb->len, 1);
-+		local_bh_enable();
-+		return verdict;
-+	}
-+
- 	stackidx = 0;
- 	ip = ip_hdr(skb);
- 	indev = state->in ? state->in->name : nulldevname;
- 	outdev = state->out ? state->out->name : nulldevname;
--	/* We handle fragments by dealing with the first fragment as
--	 * if it was a normal packet.  All other fragments are treated
--	 * normally, except that they will NEVER match rules that ask
--	 * things we don't know, ie. tcp syn flag or ports).  If the
--	 * rule is also a fragment-specific rule, non-fragments won't
--	 * match it. */
--	acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
--	acpar.thoff   = ip_hdrlen(skb);
--	acpar.hotdrop = false;
--	acpar.state   = state;
- 
--	WARN_ON(!(table->valid_hooks & (1 << hook)));
--	local_bh_disable();
- 	addend = xt_write_recseq_begin();
--	private = READ_ONCE(table->private); /* Address dependency. */
--	cpu        = smp_processor_id();
--	table_base = private->entries;
- 	jumpstack  = (struct ipt_entry **)private->jumpstack[cpu];
- 
- 	/* Switch to alternate jumpstack if we're being invoked via TEE.
-@@ -299,7 +327,16 @@ ipt_do_table(struct sk_buff *skb,
- 	if (static_key_false(&xt_tee_enabled))
- 		jumpstack += private->stacksize * __this_cpu_read(nf_skb_duplicated);
- 
--	e = get_entry(table_base, private->hook_entry[hook]);
-+	/* We handle fragments by dealing with the first fragment as
-+	 * if it was a normal packet.  All other fragments are treated
-+	 * normally, except that they will NEVER match rules that ask
-+	 * things we don't know, ie. tcp syn flag or ports).  If the
-+	 * rule is also a fragment-specific rule, non-fragments won't
-+	 * match it. */
-+	acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
-+	acpar.thoff   = ip_hdrlen(skb);
-+	acpar.hotdrop = false;
-+	acpar.state   = state;
- 
- 	do {
- 		const struct xt_entry_target *t;
diff --git a/target/linux/generic/pending-5.4/612-netfilter_match_reduce_memory_access.patch b/target/linux/generic/pending-5.4/612-netfilter_match_reduce_memory_access.patch
deleted file mode 100644
index 79da6778b6..0000000000
--- a/target/linux/generic/pending-5.4/612-netfilter_match_reduce_memory_access.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: reduce match memory access
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/ipv4/netfilter/ip_tables.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -53,9 +53,9 @@ ip_packet_match(const struct iphdr *ip,
- 	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
- 		return true;
- 
--	if (NF_INVF(ipinfo, IPT_INV_SRCIP,
-+	if (NF_INVF(ipinfo, IPT_INV_SRCIP, ipinfo->smsk.s_addr &&
- 		    (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
--	    NF_INVF(ipinfo, IPT_INV_DSTIP,
-+	    NF_INVF(ipinfo, IPT_INV_DSTIP, ipinfo->dmsk.s_addr &&
- 		    (ip->daddr & ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr))
- 		return false;
- 
diff --git a/target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch b/target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch
deleted file mode 100644
index 0735f8d20d..0000000000
--- a/target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: optional tcp window check
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/nf_conntrack_proto_tcp.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -31,6 +31,9 @@
- #include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
- #include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
- 
-+/* Do not check the TCP window for incoming packets  */
-+static int nf_ct_tcp_no_window_check __read_mostly = 1;
-+
- /* "Be conservative in what you do,
-     be liberal in what you accept from others."
-     If it's non-zero, we mark only out of window RST segments as INVALID. */
-@@ -476,6 +479,9 @@ static bool tcp_in_window(const struct n
- 	s32 receiver_offset;
- 	bool res, in_recv_win;
- 
-+	if (nf_ct_tcp_no_window_check)
-+		return true;
-+
- 	/*
- 	 * Get the required data from the packet.
- 	 */
-@@ -1130,7 +1136,7 @@ int nf_conntrack_tcp_packet(struct nf_co
- 		 IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED &&
- 		 timeouts[new_state] > timeouts[TCP_CONNTRACK_UNACK])
- 		timeout = timeouts[TCP_CONNTRACK_UNACK];
--	else if (ct->proto.tcp.last_win == 0 &&
-+	else if (!nf_ct_tcp_no_window_check && ct->proto.tcp.last_win == 0 &&
- 		 timeouts[new_state] > timeouts[TCP_CONNTRACK_RETRANS])
- 		timeout = timeouts[TCP_CONNTRACK_RETRANS];
- 	else
---- a/net/netfilter/nf_conntrack_standalone.c
-+++ b/net/netfilter/nf_conntrack_standalone.c
-@@ -25,6 +25,9 @@
- #include <net/netfilter/nf_conntrack_timestamp.h>
- #include <linux/rculist_nulls.h>
- 
-+/* Do not check the TCP window for incoming packets  */
-+static int nf_ct_tcp_no_window_check __read_mostly = 1;
-+
- static bool enable_hooks __read_mostly;
- MODULE_PARM_DESC(enable_hooks, "Always enable conntrack hooks");
- module_param(enable_hooks, bool, 0000);
-@@ -650,6 +653,7 @@ enum nf_ct_sysctl_index {
- 	NF_SYSCTL_CT_PROTO_TIMEOUT_GRE_STREAM,
- #endif
- 
-+	NF_SYSCTL_CT_PROTO_TCP_NO_WINDOW_CHECK,
- 	__NF_SYSCTL_CT_LAST_SYSCTL,
- };
- 
-@@ -976,6 +980,13 @@ static struct ctl_table nf_ct_sysctl_tab
- 		.proc_handler   = proc_dointvec_jiffies,
- 	},
- #endif
-+	[NF_SYSCTL_CT_PROTO_TCP_NO_WINDOW_CHECK] = {
-+		.procname       = "nf_conntrack_tcp_no_window_check",
-+		.data           = &nf_ct_tcp_no_window_check,
-+		.maxlen         = sizeof(unsigned int),
-+		.mode           = 0644,
-+		.proc_handler   = proc_dointvec,
-+	},
- 	{}
- };
- 
diff --git a/target/linux/generic/pending-5.4/620-net_sched-codel-do-not-defer-queue-length-update.patch b/target/linux/generic/pending-5.4/620-net_sched-codel-do-not-defer-queue-length-update.patch
deleted file mode 100644
index ca85b8a98c..0000000000
--- a/target/linux/generic/pending-5.4/620-net_sched-codel-do-not-defer-queue-length-update.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
-Date: Mon, 21 Aug 2017 11:14:14 +0300
-Subject: [PATCH] net_sched/codel: do not defer queue length update
-
-When codel wants to drop last packet in ->dequeue() it cannot call
-qdisc_tree_reduce_backlog() right away - it will notify parent qdisc
-about zero qlen and HTB/HFSC will deactivate class. The same class will
-be deactivated second time by caller of ->dequeue(). Currently codel and
-fq_codel defer update. This triggers warning in HFSC when it's qlen != 0
-but there is no active classes.
-
-This patch update parent queue length immediately: just temporary increase
-qlen around qdisc_tree_reduce_backlog() to prevent first class deactivation
-if we have skb to return.
-
-This might open another problem in HFSC - now operation peek could fail and
-deactivate parent class.
-
-Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
-Link: https://bugzilla.kernel.org/show_bug.cgi?id=109581
----
-
---- a/net/sched/sch_codel.c
-+++ b/net/sched/sch_codel.c
-@@ -95,11 +95,17 @@ static struct sk_buff *codel_qdisc_deque
- 			    &q->stats, qdisc_pkt_len, codel_get_enqueue_time,
- 			    drop_func, dequeue_func);
- 
--	/* We cant call qdisc_tree_reduce_backlog() if our qlen is 0,
--	 * or HTB crashes. Defer it for next round.
-+	/* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate
-+	 * parent class, dequeue in parent qdisc will do the same if we
-+	 * return skb. Temporary increment qlen if we have skb.
- 	 */
--	if (q->stats.drop_count && sch->q.qlen) {
--		qdisc_tree_reduce_backlog(sch, q->stats.drop_count, q->stats.drop_len);
-+	if (q->stats.drop_count) {
-+		if (skb)
-+			sch->q.qlen++;
-+		qdisc_tree_reduce_backlog(sch, q->stats.drop_count,
-+					  q->stats.drop_len);
-+		if (skb)
-+			sch->q.qlen--;
- 		q->stats.drop_count = 0;
- 		q->stats.drop_len = 0;
- 	}
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -305,6 +305,21 @@ begin:
- 			    &flow->cvars, &q->cstats, qdisc_pkt_len,
- 			    codel_get_enqueue_time, drop_func, dequeue_func);
- 
-+	/* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate
-+	 * parent class, dequeue in parent qdisc will do the same if we
-+	 * return skb. Temporary increment qlen if we have skb.
-+	 */
-+	if (q->cstats.drop_count) {
-+		if (skb)
-+			sch->q.qlen++;
-+		qdisc_tree_reduce_backlog(sch, q->cstats.drop_count,
-+					  q->cstats.drop_len);
-+		if (skb)
-+			sch->q.qlen--;
-+		q->cstats.drop_count = 0;
-+		q->cstats.drop_len = 0;
-+	}
-+
- 	if (!skb) {
- 		/* force a pass through old_flows to prevent starvation */
- 		if ((head == &q->new_flows) && !list_empty(&q->old_flows))
-@@ -315,15 +330,6 @@ begin:
- 	}
- 	qdisc_bstats_update(sch, skb);
- 	flow->deficit -= qdisc_pkt_len(skb);
--	/* We cant call qdisc_tree_reduce_backlog() if our qlen is 0,
--	 * or HTB crashes. Defer it for next round.
--	 */
--	if (q->cstats.drop_count && sch->q.qlen) {
--		qdisc_tree_reduce_backlog(sch, q->cstats.drop_count,
--					  q->cstats.drop_len);
--		q->cstats.drop_count = 0;
--		q->cstats.drop_len = 0;
--	}
- 	return skb;
- }
- 
diff --git a/target/linux/generic/pending-5.4/630-packet_socket_type.patch b/target/linux/generic/pending-5.4/630-packet_socket_type.patch
deleted file mode 100644
index d9bfda1303..0000000000
--- a/target/linux/generic/pending-5.4/630-packet_socket_type.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: add an optimization for dealing with raw sockets
-
-lede-commit: 4898039703d7315f0f3431c860123338ec3be0f6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/if_packet.h |  3 +++
- net/packet/af_packet.c         | 34 +++++++++++++++++++++++++++-------
- net/packet/internal.h          |  1 +
- 3 files changed, 31 insertions(+), 7 deletions(-)
-
---- a/include/uapi/linux/if_packet.h
-+++ b/include/uapi/linux/if_packet.h
-@@ -32,6 +32,8 @@ struct sockaddr_ll {
- #define PACKET_KERNEL		7		/* To kernel space	*/
- /* Unused, PACKET_FASTROUTE and PACKET_LOOPBACK are invisible to user space */
- #define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
-+#define PACKET_MASK_ANY		0xffffffff	/* mask for packet type bits */
-+
- 
- /* Packet socket options */
- 
-@@ -58,6 +60,7 @@ struct sockaddr_ll {
- #define PACKET_ROLLOVER_STATS		21
- #define PACKET_FANOUT_DATA		22
- #define PACKET_IGNORE_OUTGOING		23
-+#define PACKET_RECV_TYPE		24
- 
- #define PACKET_FANOUT_HASH		0
- #define PACKET_FANOUT_LB		1
---- a/net/packet/af_packet.c
-+++ b/net/packet/af_packet.c
-@@ -1797,6 +1797,7 @@ static int packet_rcv_spkt(struct sk_buf
- {
- 	struct sock *sk;
- 	struct sockaddr_pkt *spkt;
-+	struct packet_sock *po;
- 
- 	/*
- 	 *	When we registered the protocol we saved the socket in the data
-@@ -1804,6 +1805,7 @@ static int packet_rcv_spkt(struct sk_buf
- 	 */
- 
- 	sk = pt->af_packet_priv;
-+	po = pkt_sk(sk);
- 
- 	/*
- 	 *	Yank back the headers [hope the device set this
-@@ -1816,7 +1818,7 @@ static int packet_rcv_spkt(struct sk_buf
- 	 *	so that this procedure is noop.
- 	 */
- 
--	if (skb->pkt_type == PACKET_LOOPBACK)
-+	if (!(po->pkt_type & (1 << skb->pkt_type)))
- 		goto out;
- 
- 	if (!net_eq(dev_net(dev), sock_net(sk)))
-@@ -2054,12 +2056,12 @@ static int packet_rcv(struct sk_buff *sk
- 	unsigned int snaplen, res;
- 	bool is_drop_n_account = false;
- 
--	if (skb->pkt_type == PACKET_LOOPBACK)
--		goto drop;
--
- 	sk = pt->af_packet_priv;
- 	po = pkt_sk(sk);
- 
-+	if (!(po->pkt_type & (1 << skb->pkt_type)))
-+		goto drop;
-+
- 	if (!net_eq(dev_net(dev), sock_net(sk)))
- 		goto drop;
- 
-@@ -2185,12 +2187,12 @@ static int tpacket_rcv(struct sk_buff *s
- 	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32);
- 	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48);
- 
--	if (skb->pkt_type == PACKET_LOOPBACK)
--		goto drop;
--
- 	sk = pt->af_packet_priv;
- 	po = pkt_sk(sk);
- 
-+	if (!(po->pkt_type & (1 << skb->pkt_type)))
-+		goto drop;
-+
- 	if (!net_eq(dev_net(dev), sock_net(sk)))
- 		goto drop;
- 
-@@ -3289,6 +3291,7 @@ static int packet_create(struct net *net
- 	mutex_init(&po->pg_vec_lock);
- 	po->rollover = NULL;
- 	po->prot_hook.func = packet_rcv;
-+	po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
- 
- 	if (sock->type == SOCK_PACKET)
- 		po->prot_hook.func = packet_rcv_spkt;
-@@ -3924,6 +3927,16 @@ packet_setsockopt(struct socket *sock, i
- 		po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
- 		return 0;
- 	}
-+        case PACKET_RECV_TYPE:
-+        {
-+                unsigned int val;
-+                if (optlen != sizeof(val))
-+                        return -EINVAL;
-+                if (copy_from_user(&val, optval, sizeof(val)))
-+                        return -EFAULT;
-+                po->pkt_type = val & ~BIT(PACKET_LOOPBACK);
-+                return 0;
-+        }
- 	default:
- 		return -ENOPROTOOPT;
- 	}
-@@ -3980,6 +3993,13 @@ static int packet_getsockopt(struct sock
- 	case PACKET_VNET_HDR:
- 		val = po->has_vnet_hdr;
- 		break;
-+	case PACKET_RECV_TYPE:
-+		if (len > sizeof(unsigned int))
-+			len = sizeof(unsigned int);
-+		val = po->pkt_type;
-+
-+		data = &val;
-+		break;
- 	case PACKET_VERSION:
- 		val = po->tp_version;
- 		break;
---- a/net/packet/internal.h
-+++ b/net/packet/internal.h
-@@ -136,6 +136,7 @@ struct packet_sock {
- 	int			(*xmit)(struct sk_buff *skb);
- 	struct packet_type	prot_hook ____cacheline_aligned_in_smp;
- 	atomic_t		tp_drops ____cacheline_aligned_in_smp;
-+	unsigned int		pkt_type;
- };
- 
- static struct packet_sock *pkt_sk(struct sock *sk)
diff --git a/target/linux/generic/pending-5.4/640-netfilter-nf_flow_table-add-hardware-offload-support.patch b/target/linux/generic/pending-5.4/640-netfilter-nf_flow_table-add-hardware-offload-support.patch
deleted file mode 100644
index f5d9dcde99..0000000000
--- a/target/linux/generic/pending-5.4/640-netfilter-nf_flow_table-add-hardware-offload-support.patch
+++ /dev/null
@@ -1,564 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Thu, 11 Jan 2018 16:32:00 +0100
-Subject: [PATCH] netfilter: nf_flow_table: add hardware offload support
-
-This patch adds the infrastructure to offload flows to hardware, in case
-the nic/switch comes with built-in flow tables capabilities.
-
-If the hardware comes with no hardware flow tables or they have
-limitations in terms of features, the existing infrastructure falls back
-to the software flow table implementation.
-
-The software flow table garbage collector skips entries that resides in
-the hardware, so the hardware will be responsible for releasing this
-flow table entry too via flow_offload_dead().
-
-Hardware configuration, either to add or to delete entries, is done from
-the hardware offload workqueue, to ensure this is done from user context
-given that we may sleep when grabbing the mdio mutex.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
- create mode 100644 net/netfilter/nf_flow_table_hw.c
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -922,6 +922,13 @@ struct devlink;
- struct tlsdev_ops;
- 
- 
-+struct flow_offload;
-+
-+enum flow_offload_type {
-+	FLOW_OFFLOAD_ADD	= 0,
-+	FLOW_OFFLOAD_DEL,
-+};
-+
- /*
-  * This structure defines the management hooks for network devices.
-  * The following hooks can be defined; unless noted otherwise, they are
-@@ -1154,6 +1161,10 @@ struct tlsdev_ops;
-  * int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh,
-  *			     u16 flags);
-  *
-+ * int (*ndo_flow_offload)(enum flow_offload_type type,
-+ *			   struct flow_offload *flow);
-+ *	Adds/deletes flow entry to/from net device flowtable.
-+ *
-  * int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier);
-  *	Called to change device carrier. Soft-devices (like dummy, team, etc)
-  *	which do not represent real hardware may define this to allow their
-@@ -1401,6 +1412,8 @@ struct net_device_ops {
- 	int			(*ndo_bridge_dellink)(struct net_device *dev,
- 						      struct nlmsghdr *nlh,
- 						      u16 flags);
-+	int			(*ndo_flow_offload)(enum flow_offload_type type,
-+						    struct flow_offload *flow);
- 	int			(*ndo_change_carrier)(struct net_device *dev,
- 						      bool new_carrier);
- 	int			(*ndo_get_phys_port_id)(struct net_device *dev,
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -21,11 +21,17 @@ struct nf_flowtable_type {
- 	struct module			*owner;
- };
- 
-+enum nf_flowtable_flags {
-+	NF_FLOWTABLE_F_HW		= 0x1,
-+};
-+
- struct nf_flowtable {
- 	struct list_head		list;
- 	struct rhashtable		rhashtable;
- 	const struct nf_flowtable_type	*type;
-+	u32				flags;
- 	struct delayed_work		gc_work;
-+	possible_net_t			ft_net;
- };
- 
- enum flow_offload_tuple_dir {
-@@ -68,6 +74,7 @@ struct flow_offload_tuple_rhash {
- #define FLOW_OFFLOAD_DNAT	0x2
- #define FLOW_OFFLOAD_DYING	0x4
- #define FLOW_OFFLOAD_TEARDOWN	0x8
-+#define FLOW_OFFLOAD_HW		0x10
- 
- struct flow_offload {
- 	struct flow_offload_tuple_rhash		tuplehash[FLOW_OFFLOAD_DIR_MAX];
-@@ -120,6 +127,22 @@ unsigned int nf_flow_offload_ip_hook(voi
- unsigned int nf_flow_offload_ipv6_hook(void *priv, struct sk_buff *skb,
- 				       const struct nf_hook_state *state);
- 
-+void nf_flow_offload_hw_add(struct net *net, struct flow_offload *flow,
-+			    struct nf_conn *ct);
-+void nf_flow_offload_hw_del(struct net *net, struct flow_offload *flow);
-+
-+struct nf_flow_table_hw {
-+	struct module	*owner;
-+	void		(*add)(struct net *net, struct flow_offload *flow,
-+			       struct nf_conn *ct);
-+	void		(*del)(struct net *net, struct flow_offload *flow);
-+};
-+
-+int nf_flow_table_hw_register(const struct nf_flow_table_hw *offload);
-+void nf_flow_table_hw_unregister(const struct nf_flow_table_hw *offload);
-+
-+extern struct work_struct nf_flow_offload_hw_work;
-+
- #define MODULE_ALIAS_NF_FLOWTABLE(family)	\
- 	MODULE_ALIAS("nf-flowtable-" __stringify(family))
- 
---- a/include/uapi/linux/netfilter/nf_tables.h
-+++ b/include/uapi/linux/netfilter/nf_tables.h
-@@ -1516,6 +1516,7 @@ enum nft_object_attributes {
-  * @NFTA_FLOWTABLE_HOOK: netfilter hook configuration(NLA_U32)
-  * @NFTA_FLOWTABLE_USE: number of references to this flow table (NLA_U32)
-  * @NFTA_FLOWTABLE_HANDLE: object handle (NLA_U64)
-+ * @NFTA_FLOWTABLE_FLAGS: flags (NLA_U32)
-  */
- enum nft_flowtable_attributes {
- 	NFTA_FLOWTABLE_UNSPEC,
-@@ -1525,6 +1526,7 @@ enum nft_flowtable_attributes {
- 	NFTA_FLOWTABLE_USE,
- 	NFTA_FLOWTABLE_HANDLE,
- 	NFTA_FLOWTABLE_PAD,
-+	NFTA_FLOWTABLE_FLAGS,
- 	__NFTA_FLOWTABLE_MAX
- };
- #define NFTA_FLOWTABLE_MAX	(__NFTA_FLOWTABLE_MAX - 1)
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -711,6 +711,15 @@ config NF_FLOW_TABLE
- 
- 	  To compile it as a module, choose M here.
- 
-+config NF_FLOW_TABLE_HW
-+	tristate "Netfilter flow table hardware offload module"
-+	depends on NF_FLOW_TABLE
-+	help
-+	  This option adds hardware offload support for the flow table core
-+	  infrastructure.
-+
-+	  To compile it as a module, choose M here.
-+
- config NETFILTER_XTABLES
- 	tristate "Netfilter Xtables support (required for ip_tables)"
- 	default m if NETFILTER_ADVANCED=n
---- a/net/netfilter/Makefile
-+++ b/net/netfilter/Makefile
-@@ -123,6 +123,7 @@ obj-$(CONFIG_NF_FLOW_TABLE)	+= nf_flow_t
- nf_flow_table-objs := nf_flow_table_core.o nf_flow_table_ip.o
- 
- obj-$(CONFIG_NF_FLOW_TABLE_INET) += nf_flow_table_inet.o
-+obj-$(CONFIG_NF_FLOW_TABLE_HW)	+= nf_flow_table_hw.o
- 
- # generic X tables
- obj-$(CONFIG_NETFILTER_XTABLES) += x_tables.o xt_tcpudp.o
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -248,10 +248,16 @@ static inline bool nf_flow_has_expired(c
- 	return nf_flow_timeout_delta(flow->timeout) <= 0;
- }
- 
-+static inline bool nf_flow_in_hw(const struct flow_offload *flow)
-+{
-+	return flow->flags & FLOW_OFFLOAD_HW;
-+}
-+
- static void flow_offload_del(struct nf_flowtable *flow_table,
- 			     struct flow_offload *flow)
- {
- 	struct flow_offload_entry *e;
-+	struct net *net = read_pnet(&flow_table->ft_net);
- 
- 	rhashtable_remove_fast(&flow_table->rhashtable,
- 			       &flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].node,
-@@ -271,6 +277,9 @@ static void flow_offload_del(struct nf_f
- 	if (!(flow->flags & FLOW_OFFLOAD_TEARDOWN))
- 		flow_offload_fixup_ct_state(e->ct);
- 
-+	if (nf_flow_in_hw(flow))
-+		nf_flow_offload_hw_del(net, flow);
-+
- 	flow_offload_free(flow);
- }
- 
-@@ -361,6 +370,9 @@ static void nf_flow_offload_gc_step(stru
- 	if (!teardown)
- 		nf_ct_offload_timeout(flow);
- 
-+	if (nf_flow_in_hw(flow) && !teardown)
-+		return;
-+
- 	if (nf_flow_has_expired(flow) || teardown)
- 		flow_offload_del(flow_table, flow);
- }
-@@ -490,10 +502,43 @@ int nf_flow_dnat_port(const struct flow_
- }
- EXPORT_SYMBOL_GPL(nf_flow_dnat_port);
- 
-+static const struct nf_flow_table_hw __rcu *nf_flow_table_hw_hook __read_mostly;
-+
-+static int nf_flow_offload_hw_init(struct nf_flowtable *flow_table)
-+{
-+	const struct nf_flow_table_hw *offload;
-+
-+	if (!rcu_access_pointer(nf_flow_table_hw_hook))
-+		request_module("nf-flow-table-hw");
-+
-+	rcu_read_lock();
-+	offload = rcu_dereference(nf_flow_table_hw_hook);
-+	if (!offload)
-+		goto err_no_hw_offload;
-+
-+	if (!try_module_get(offload->owner))
-+		goto err_no_hw_offload;
-+
-+	rcu_read_unlock();
-+
-+	return 0;
-+
-+err_no_hw_offload:
-+	rcu_read_unlock();
-+
-+	return -EOPNOTSUPP;
-+}
-+
- int nf_flow_table_init(struct nf_flowtable *flowtable)
- {
- 	int err;
- 
-+	if (flowtable->flags & NF_FLOWTABLE_F_HW) {
-+		err = nf_flow_offload_hw_init(flowtable);
-+		if (err)
-+			return err;
-+	}
-+
- 	INIT_DEFERRABLE_WORK(&flowtable->gc_work, nf_flow_offload_work_gc);
- 
- 	err = rhashtable_init(&flowtable->rhashtable,
-@@ -534,6 +579,8 @@ static void nf_flow_table_iterate_cleanu
- {
- 	nf_flow_table_iterate(flowtable, nf_flow_table_do_cleanup, dev);
- 	flush_delayed_work(&flowtable->gc_work);
-+	if (flowtable->flags & NF_FLOWTABLE_F_HW)
-+		flush_work(&nf_flow_offload_hw_work);
- }
- 
- void nf_flow_table_cleanup(struct net_device *dev)
-@@ -547,6 +594,26 @@ void nf_flow_table_cleanup(struct net_de
- }
- EXPORT_SYMBOL_GPL(nf_flow_table_cleanup);
- 
-+struct work_struct nf_flow_offload_hw_work;
-+EXPORT_SYMBOL_GPL(nf_flow_offload_hw_work);
-+
-+/* Give the hardware workqueue the chance to remove entries from hardware.*/
-+static void nf_flow_offload_hw_free(struct nf_flowtable *flowtable)
-+{
-+	const struct nf_flow_table_hw *offload;
-+
-+	flush_work(&nf_flow_offload_hw_work);
-+
-+	rcu_read_lock();
-+	offload = rcu_dereference(nf_flow_table_hw_hook);
-+	if (!offload) {
-+		rcu_read_unlock();
-+		return;
-+	}
-+	module_put(offload->owner);
-+	rcu_read_unlock();
-+}
-+
- void nf_flow_table_free(struct nf_flowtable *flow_table)
- {
- 	mutex_lock(&flowtable_lock);
-@@ -556,9 +623,58 @@ void nf_flow_table_free(struct nf_flowta
- 	nf_flow_table_iterate(flow_table, nf_flow_table_do_cleanup, NULL);
- 	nf_flow_table_iterate(flow_table, nf_flow_offload_gc_step, flow_table);
- 	rhashtable_destroy(&flow_table->rhashtable);
-+	if (flow_table->flags & NF_FLOWTABLE_F_HW)
-+		nf_flow_offload_hw_free(flow_table);
- }
- EXPORT_SYMBOL_GPL(nf_flow_table_free);
- 
-+/* Must be called from user context. */
-+void nf_flow_offload_hw_add(struct net *net, struct flow_offload *flow,
-+			    struct nf_conn *ct)
-+{
-+	const struct nf_flow_table_hw *offload;
-+
-+	rcu_read_lock();
-+	offload = rcu_dereference(nf_flow_table_hw_hook);
-+	if (offload)
-+		offload->add(net, flow, ct);
-+	rcu_read_unlock();
-+}
-+EXPORT_SYMBOL_GPL(nf_flow_offload_hw_add);
-+
-+/* Must be called from user context. */
-+void nf_flow_offload_hw_del(struct net *net, struct flow_offload *flow)
-+{
-+	const struct nf_flow_table_hw *offload;
-+
-+	rcu_read_lock();
-+	offload = rcu_dereference(nf_flow_table_hw_hook);
-+	if (offload)
-+		offload->del(net, flow);
-+	rcu_read_unlock();
-+}
-+EXPORT_SYMBOL_GPL(nf_flow_offload_hw_del);
-+
-+int nf_flow_table_hw_register(const struct nf_flow_table_hw *offload)
-+{
-+	if (rcu_access_pointer(nf_flow_table_hw_hook))
-+		return -EBUSY;
-+
-+	rcu_assign_pointer(nf_flow_table_hw_hook, offload);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(nf_flow_table_hw_register);
-+
-+void nf_flow_table_hw_unregister(const struct nf_flow_table_hw *offload)
-+{
-+	WARN_ON(rcu_access_pointer(nf_flow_table_hw_hook) != offload);
-+	rcu_assign_pointer(nf_flow_table_hw_hook, NULL);
-+
-+	synchronize_rcu();
-+}
-+EXPORT_SYMBOL_GPL(nf_flow_table_hw_unregister);
-+
- static int nf_flow_table_netdev_event(struct notifier_block *this,
- 				      unsigned long event, void *ptr)
- {
---- /dev/null
-+++ b/net/netfilter/nf_flow_table_hw.c
-@@ -0,0 +1,169 @@
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/netfilter.h>
-+#include <linux/rhashtable.h>
-+#include <linux/netdevice.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_core.h>
-+#include <net/netfilter/nf_conntrack_tuple.h>
-+
-+static DEFINE_SPINLOCK(flow_offload_hw_pending_list_lock);
-+static LIST_HEAD(flow_offload_hw_pending_list);
-+
-+static DEFINE_MUTEX(nf_flow_offload_hw_mutex);
-+
-+struct flow_offload_hw {
-+	struct list_head	list;
-+	enum flow_offload_type	type;
-+	struct flow_offload	*flow;
-+	struct nf_conn		*ct;
-+	possible_net_t		flow_hw_net;
-+};
-+
-+static int do_flow_offload_hw(struct net *net, struct flow_offload *flow,
-+			      int type)
-+{
-+	struct net_device *indev;
-+	int ret, ifindex;
-+
-+	ifindex = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.iifidx;
-+	indev = dev_get_by_index(net, ifindex);
-+	if (WARN_ON(!indev))
-+		return 0;
-+
-+	mutex_lock(&nf_flow_offload_hw_mutex);
-+	ret = indev->netdev_ops->ndo_flow_offload(type, flow);
-+	mutex_unlock(&nf_flow_offload_hw_mutex);
-+
-+	dev_put(indev);
-+
-+	return ret;
-+}
-+
-+static void flow_offload_hw_work_add(struct flow_offload_hw *offload)
-+{
-+	struct net *net;
-+	int ret;
-+
-+	if (nf_ct_is_dying(offload->ct))
-+		return;
-+
-+	net = read_pnet(&offload->flow_hw_net);
-+	ret = do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_ADD);
-+	if (ret >= 0)
-+		offload->flow->flags |= FLOW_OFFLOAD_HW;
-+}
-+
-+static void flow_offload_hw_work_del(struct flow_offload_hw *offload)
-+{
-+	struct net *net = read_pnet(&offload->flow_hw_net);
-+
-+	do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_DEL);
-+}
-+
-+static void flow_offload_hw_work(struct work_struct *work)
-+{
-+	struct flow_offload_hw *offload, *next;
-+	LIST_HEAD(hw_offload_pending);
-+
-+	spin_lock_bh(&flow_offload_hw_pending_list_lock);
-+	list_replace_init(&flow_offload_hw_pending_list, &hw_offload_pending);
-+	spin_unlock_bh(&flow_offload_hw_pending_list_lock);
-+
-+	list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
-+		switch (offload->type) {
-+		case FLOW_OFFLOAD_ADD:
-+			flow_offload_hw_work_add(offload);
-+			break;
-+		case FLOW_OFFLOAD_DEL:
-+			flow_offload_hw_work_del(offload);
-+			break;
-+		}
-+		if (offload->ct)
-+			nf_conntrack_put(&offload->ct->ct_general);
-+		list_del(&offload->list);
-+		kfree(offload);
-+	}
-+}
-+
-+static void flow_offload_queue_work(struct flow_offload_hw *offload)
-+{
-+	spin_lock_bh(&flow_offload_hw_pending_list_lock);
-+	list_add_tail(&offload->list, &flow_offload_hw_pending_list);
-+	spin_unlock_bh(&flow_offload_hw_pending_list_lock);
-+
-+	schedule_work(&nf_flow_offload_hw_work);
-+}
-+
-+static void flow_offload_hw_add(struct net *net, struct flow_offload *flow,
-+				struct nf_conn *ct)
-+{
-+	struct flow_offload_hw *offload;
-+
-+	offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
-+	if (!offload)
-+		return;
-+
-+	nf_conntrack_get(&ct->ct_general);
-+	offload->type = FLOW_OFFLOAD_ADD;
-+	offload->ct = ct;
-+	offload->flow = flow;
-+	write_pnet(&offload->flow_hw_net, net);
-+
-+	flow_offload_queue_work(offload);
-+}
-+
-+static void flow_offload_hw_del(struct net *net, struct flow_offload *flow)
-+{
-+	struct flow_offload_hw *offload;
-+
-+	offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
-+	if (!offload)
-+		return;
-+
-+	offload->type = FLOW_OFFLOAD_DEL;
-+	offload->ct = NULL;
-+	offload->flow = flow;
-+	write_pnet(&offload->flow_hw_net, net);
-+
-+	flow_offload_queue_work(offload);
-+}
-+
-+static const struct nf_flow_table_hw flow_offload_hw = {
-+	.add	= flow_offload_hw_add,
-+	.del	= flow_offload_hw_del,
-+	.owner	= THIS_MODULE,
-+};
-+
-+static int __init nf_flow_table_hw_module_init(void)
-+{
-+	INIT_WORK(&nf_flow_offload_hw_work, flow_offload_hw_work);
-+	nf_flow_table_hw_register(&flow_offload_hw);
-+
-+	return 0;
-+}
-+
-+static void __exit nf_flow_table_hw_module_exit(void)
-+{
-+	struct flow_offload_hw *offload, *next;
-+	LIST_HEAD(hw_offload_pending);
-+
-+	nf_flow_table_hw_unregister(&flow_offload_hw);
-+	cancel_work_sync(&nf_flow_offload_hw_work);
-+
-+	list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
-+		if (offload->ct)
-+			nf_conntrack_put(&offload->ct->ct_general);
-+		list_del(&offload->list);
-+		kfree(offload);
-+	}
-+}
-+
-+module_init(nf_flow_table_hw_module_init);
-+module_exit(nf_flow_table_hw_module_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Pablo Neira Ayuso <pablo@netfilter.org>");
-+MODULE_ALIAS("nf-flow-table-hw");
---- a/net/netfilter/nf_tables_api.c
-+++ b/net/netfilter/nf_tables_api.c
-@@ -5743,6 +5743,13 @@ static int nf_tables_flowtable_parse_hoo
- 	if (err < 0)
- 		return err;
- 
-+	for (i = 0; i < n; i++) {
-+		if (flowtable->data.flags & NF_FLOWTABLE_F_HW &&
-+		    !dev_array[i]->netdev_ops->ndo_flow_offload) {
-+			return -EOPNOTSUPP;
-+		}
-+	}
-+
- 	ops = kcalloc(n, sizeof(struct nf_hook_ops), GFP_KERNEL);
- 	if (!ops)
- 		return -ENOMEM;
-@@ -5873,10 +5880,19 @@ static int nf_tables_newflowtable(struct
- 	}
- 
- 	flowtable->data.type = type;
-+	write_pnet(&flowtable->data.ft_net, net);
-+
- 	err = type->init(&flowtable->data);
- 	if (err < 0)
- 		goto err3;
- 
-+	if (nla[NFTA_FLOWTABLE_FLAGS]) {
-+		flowtable->data.flags =
-+			ntohl(nla_get_be32(nla[NFTA_FLOWTABLE_FLAGS]));
-+		if (flowtable->data.flags & ~NF_FLOWTABLE_F_HW)
-+			goto err4;
-+	}
-+
- 	err = nf_tables_flowtable_parse_hook(&ctx, nla[NFTA_FLOWTABLE_HOOK],
- 					     flowtable);
- 	if (err < 0)
-@@ -6002,7 +6018,8 @@ static int nf_tables_fill_flowtable_info
- 	    nla_put_string(skb, NFTA_FLOWTABLE_NAME, flowtable->name) ||
- 	    nla_put_be32(skb, NFTA_FLOWTABLE_USE, htonl(flowtable->use)) ||
- 	    nla_put_be64(skb, NFTA_FLOWTABLE_HANDLE, cpu_to_be64(flowtable->handle),
--			 NFTA_FLOWTABLE_PAD))
-+			 NFTA_FLOWTABLE_PAD) ||
-+	    nla_put_be32(skb, NFTA_FLOWTABLE_FLAGS, htonl(flowtable->data.flags)))
- 		goto nla_put_failure;
- 
- 	nest = nla_nest_start_noflag(skb, NFTA_FLOWTABLE_HOOK);
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -128,6 +128,9 @@ static void nft_flow_offload_eval(const
- 	if (ret < 0)
- 		goto err_flow_add;
- 
-+	if (flowtable->flags & NF_FLOWTABLE_F_HW)
-+		nf_flow_offload_hw_add(nft_net(pkt), flow, ct);
-+
- 	dst_release(route.tuple[!dir].dst);
- 	return;
- 
diff --git a/target/linux/generic/pending-5.4/641-netfilter-nf_flow_table-support-hw-offload-through-v.patch b/target/linux/generic/pending-5.4/641-netfilter-nf_flow_table-support-hw-offload-through-v.patch
deleted file mode 100644
index b808c0257d..0000000000
--- a/target/linux/generic/pending-5.4/641-netfilter-nf_flow_table-support-hw-offload-through-v.patch
+++ /dev/null
@@ -1,306 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 15 Mar 2018 20:46:31 +0100
-Subject: [PATCH] netfilter: nf_flow_table: support hw offload through
- virtual interfaces
-
-There are hardware offload devices that support offloading VLANs and
-PPPoE devices. Additionally, it is useful to be able to offload packets
-routed through bridge interfaces as well.
-Add support for finding the path to the offload device through these
-virtual interfaces, while collecting useful parameters for the offload
-device, like VLAN ID/protocol, PPPoE session and Ethernet MAC address.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -923,6 +923,7 @@ struct tlsdev_ops;
- 
- 
- struct flow_offload;
-+struct flow_offload_hw_path;
- 
- enum flow_offload_type {
- 	FLOW_OFFLOAD_ADD	= 0,
-@@ -1161,8 +1162,15 @@ enum flow_offload_type {
-  * int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh,
-  *			     u16 flags);
-  *
-+ * int (*ndo_flow_offload_check)(struct flow_offload_hw_path *path);
-+ *	For virtual devices like bridges, vlan, and pppoe, fill in the
-+ *	underlying network device that can be used for offloading connections.
-+ *	Return an error if offloading is not supported.
-+ *
-  * int (*ndo_flow_offload)(enum flow_offload_type type,
-- *			   struct flow_offload *flow);
-+ *			   struct flow_offload *flow,
-+ *			   struct flow_offload_hw_path *src,
-+ *			   struct flow_offload_hw_path *dest);
-  *	Adds/deletes flow entry to/from net device flowtable.
-  *
-  * int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier);
-@@ -1412,8 +1420,11 @@ struct net_device_ops {
- 	int			(*ndo_bridge_dellink)(struct net_device *dev,
- 						      struct nlmsghdr *nlh,
- 						      u16 flags);
-+	int			(*ndo_flow_offload_check)(struct flow_offload_hw_path *path);
- 	int			(*ndo_flow_offload)(enum flow_offload_type type,
--						    struct flow_offload *flow);
-+						    struct flow_offload *flow,
-+						    struct flow_offload_hw_path *src,
-+						    struct flow_offload_hw_path *dest);
- 	int			(*ndo_change_carrier)(struct net_device *dev,
- 						      bool new_carrier);
- 	int			(*ndo_get_phys_port_id)(struct net_device *dev,
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -85,6 +85,21 @@ struct flow_offload {
- 	};
- };
- 
-+#define FLOW_OFFLOAD_PATH_ETHERNET	BIT(0)
-+#define FLOW_OFFLOAD_PATH_VLAN		BIT(1)
-+#define FLOW_OFFLOAD_PATH_PPPOE		BIT(2)
-+
-+struct flow_offload_hw_path {
-+	struct net_device *dev;
-+	u32 flags;
-+
-+	u8 eth_src[ETH_ALEN];
-+	u8 eth_dest[ETH_ALEN];
-+	u16 vlan_proto;
-+	u16 vlan_id;
-+	u16 pppoe_sid;
-+};
-+
- #define NF_FLOW_TIMEOUT (30 * HZ)
- 
- struct nf_flow_route {
---- a/net/netfilter/nf_flow_table_hw.c
-+++ b/net/netfilter/nf_flow_table_hw.c
-@@ -19,48 +19,77 @@ struct flow_offload_hw {
- 	enum flow_offload_type	type;
- 	struct flow_offload	*flow;
- 	struct nf_conn		*ct;
--	possible_net_t		flow_hw_net;
-+
-+	struct flow_offload_hw_path src;
-+	struct flow_offload_hw_path dest;
- };
- 
--static int do_flow_offload_hw(struct net *net, struct flow_offload *flow,
--			      int type)
-+static void flow_offload_check_ethernet(struct flow_offload_tuple *tuple,
-+					struct dst_entry *dst,
-+					struct flow_offload_hw_path *path)
- {
--	struct net_device *indev;
--	int ret, ifindex;
-+	struct net_device *dev = path->dev;
-+	struct neighbour *n;
- 
--	ifindex = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.iifidx;
--	indev = dev_get_by_index(net, ifindex);
--	if (WARN_ON(!indev))
--		return 0;
--
--	mutex_lock(&nf_flow_offload_hw_mutex);
--	ret = indev->netdev_ops->ndo_flow_offload(type, flow);
--	mutex_unlock(&nf_flow_offload_hw_mutex);
-+	if (dev->type != ARPHRD_ETHER)
-+		return;
- 
--	dev_put(indev);
-+	memcpy(path->eth_src, path->dev->dev_addr, ETH_ALEN);
-+	n = dst_neigh_lookup(dst, &tuple->src_v4);
-+	if (!n)
-+		return;
- 
--	return ret;
-+	memcpy(path->eth_dest, n->ha, ETH_ALEN);
-+	path->flags |= FLOW_OFFLOAD_PATH_ETHERNET;
-+	neigh_release(n);
- }
- 
--static void flow_offload_hw_work_add(struct flow_offload_hw *offload)
-+static int flow_offload_check_path(struct net *net,
-+				   struct flow_offload_tuple *tuple,
-+				   struct dst_entry *dst,
-+				   struct flow_offload_hw_path *path)
- {
--	struct net *net;
--	int ret;
-+	struct net_device *dev;
- 
--	if (nf_ct_is_dying(offload->ct))
--		return;
-+	dev = dev_get_by_index_rcu(net, tuple->iifidx);
-+	if (!dev)
-+		return -ENOENT;
-+
-+	path->dev = dev;
-+	flow_offload_check_ethernet(tuple, dst, path);
- 
--	net = read_pnet(&offload->flow_hw_net);
--	ret = do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_ADD);
--	if (ret >= 0)
--		offload->flow->flags |= FLOW_OFFLOAD_HW;
-+	if (dev->netdev_ops->ndo_flow_offload_check)
-+		return dev->netdev_ops->ndo_flow_offload_check(path);
-+
-+	return 0;
- }
- 
--static void flow_offload_hw_work_del(struct flow_offload_hw *offload)
-+static int do_flow_offload_hw(struct flow_offload_hw *offload)
- {
--	struct net *net = read_pnet(&offload->flow_hw_net);
-+	struct net_device *src_dev = offload->src.dev;
-+	struct net_device *dest_dev = offload->dest.dev;
-+	int ret;
-+
-+	ret = src_dev->netdev_ops->ndo_flow_offload(offload->type,
-+						    offload->flow,
-+						    &offload->src,
-+						    &offload->dest);
-+
-+	/* restore devices in case the driver mangled them */
-+	offload->src.dev = src_dev;
-+	offload->dest.dev = dest_dev;
- 
--	do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_DEL);
-+	return ret;
-+}
-+
-+static void flow_offload_hw_free(struct flow_offload_hw *offload)
-+{
-+	dev_put(offload->src.dev);
-+	dev_put(offload->dest.dev);
-+	if (offload->ct)
-+		nf_conntrack_put(&offload->ct->ct_general);
-+	list_del(&offload->list);
-+	kfree(offload);
- }
- 
- static void flow_offload_hw_work(struct work_struct *work)
-@@ -73,18 +102,22 @@ static void flow_offload_hw_work(struct
- 	spin_unlock_bh(&flow_offload_hw_pending_list_lock);
- 
- 	list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
-+		mutex_lock(&nf_flow_offload_hw_mutex);
- 		switch (offload->type) {
- 		case FLOW_OFFLOAD_ADD:
--			flow_offload_hw_work_add(offload);
-+			if (nf_ct_is_dying(offload->ct))
-+				break;
-+
-+			if (do_flow_offload_hw(offload) >= 0)
-+				offload->flow->flags |= FLOW_OFFLOAD_HW;
- 			break;
- 		case FLOW_OFFLOAD_DEL:
--			flow_offload_hw_work_del(offload);
-+			do_flow_offload_hw(offload);
- 			break;
- 		}
--		if (offload->ct)
--			nf_conntrack_put(&offload->ct->ct_general);
--		list_del(&offload->list);
--		kfree(offload);
-+		mutex_unlock(&nf_flow_offload_hw_mutex);
-+
-+		flow_offload_hw_free(offload);
- 	}
- }
- 
-@@ -97,20 +130,56 @@ static void flow_offload_queue_work(stru
- 	schedule_work(&nf_flow_offload_hw_work);
- }
- 
-+static struct flow_offload_hw *
-+flow_offload_hw_prepare(struct net *net, struct flow_offload *flow)
-+{
-+	struct flow_offload_hw_path src = {};
-+	struct flow_offload_hw_path dest = {};
-+	struct flow_offload_tuple *tuple_s, *tuple_d;
-+	struct flow_offload_hw *offload = NULL;
-+
-+	rcu_read_lock_bh();
-+
-+	tuple_s = &flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple;
-+	tuple_d = &flow->tuplehash[FLOW_OFFLOAD_DIR_REPLY].tuple;
-+
-+	if (flow_offload_check_path(net, tuple_s, tuple_d->dst_cache, &src))
-+		goto out;
-+
-+	if (flow_offload_check_path(net, tuple_d, tuple_s->dst_cache, &dest))
-+		goto out;
-+
-+	if (!src.dev->netdev_ops->ndo_flow_offload)
-+		goto out;
-+
-+	offload = kzalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
-+	if (!offload)
-+		goto out;
-+
-+	dev_hold(src.dev);
-+	dev_hold(dest.dev);
-+	offload->src = src;
-+	offload->dest = dest;
-+	offload->flow = flow;
-+
-+out:
-+	rcu_read_unlock_bh();
-+
-+	return offload;
-+}
-+
- static void flow_offload_hw_add(struct net *net, struct flow_offload *flow,
- 				struct nf_conn *ct)
- {
- 	struct flow_offload_hw *offload;
- 
--	offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
-+	offload = flow_offload_hw_prepare(net, flow);
- 	if (!offload)
- 		return;
- 
- 	nf_conntrack_get(&ct->ct_general);
- 	offload->type = FLOW_OFFLOAD_ADD;
- 	offload->ct = ct;
--	offload->flow = flow;
--	write_pnet(&offload->flow_hw_net, net);
- 
- 	flow_offload_queue_work(offload);
- }
-@@ -119,14 +188,11 @@ static void flow_offload_hw_del(struct n
- {
- 	struct flow_offload_hw *offload;
- 
--	offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
-+	offload = flow_offload_hw_prepare(net, flow);
- 	if (!offload)
- 		return;
- 
- 	offload->type = FLOW_OFFLOAD_DEL;
--	offload->ct = NULL;
--	offload->flow = flow;
--	write_pnet(&offload->flow_hw_net, net);
- 
- 	flow_offload_queue_work(offload);
- }
-@@ -153,12 +219,8 @@ static void __exit nf_flow_table_hw_modu
- 	nf_flow_table_hw_unregister(&flow_offload_hw);
- 	cancel_work_sync(&nf_flow_offload_hw_work);
- 
--	list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
--		if (offload->ct)
--			nf_conntrack_put(&offload->ct->ct_general);
--		list_del(&offload->list);
--		kfree(offload);
--	}
-+	list_for_each_entry_safe(offload, next, &hw_offload_pending, list)
-+		flow_offload_hw_free(offload);
- }
- 
- module_init(nf_flow_table_hw_module_init);
diff --git a/target/linux/generic/pending-5.4/642-net-8021q-support-hardware-flow-table-offload.patch b/target/linux/generic/pending-5.4/642-net-8021q-support-hardware-flow-table-offload.patch
deleted file mode 100644
index cfcc28af3e..0000000000
--- a/target/linux/generic/pending-5.4/642-net-8021q-support-hardware-flow-table-offload.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 15 Mar 2018 20:49:58 +0100
-Subject: [PATCH] net: 8021q: support hardware flow table offload
-
-Add the VLAN ID and protocol information
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/8021q/vlan_dev.c
-+++ b/net/8021q/vlan_dev.c
-@@ -27,6 +27,11 @@
- #include <linux/phy.h>
- #include <net/arp.h>
- 
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#endif
-+
- #include "vlan.h"
- #include "vlanproc.h"
- #include <linux/if_vlan.h>
-@@ -747,6 +752,27 @@ static int vlan_dev_get_iflink(const str
- 	return real_dev->ifindex;
- }
- 
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+static int vlan_dev_flow_offload_check(struct flow_offload_hw_path *path)
-+{
-+	struct net_device *dev = path->dev;
-+	struct vlan_dev_priv *vlan = vlan_dev_priv(dev);
-+
-+	if (path->flags & FLOW_OFFLOAD_PATH_VLAN)
-+		return -EEXIST;
-+
-+	path->flags |= FLOW_OFFLOAD_PATH_VLAN;
-+	path->vlan_proto = vlan->vlan_proto;
-+	path->vlan_id = vlan->vlan_id;
-+	path->dev = vlan->real_dev;
-+
-+	if (vlan->real_dev->netdev_ops->ndo_flow_offload_check)
-+		return vlan->real_dev->netdev_ops->ndo_flow_offload_check(path);
-+
-+	return 0;
-+}
-+#endif /* CONFIG_NF_FLOW_TABLE */
-+
- static const struct ethtool_ops vlan_ethtool_ops = {
- 	.get_link_ksettings	= vlan_ethtool_get_link_ksettings,
- 	.get_drvinfo	        = vlan_ethtool_get_drvinfo,
-@@ -785,6 +811,9 @@ static const struct net_device_ops vlan_
- #endif
- 	.ndo_fix_features	= vlan_dev_fix_features,
- 	.ndo_get_iflink		= vlan_dev_get_iflink,
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	.ndo_flow_offload_check = vlan_dev_flow_offload_check,
-+#endif
- };
- 
- static void vlan_dev_free(struct net_device *dev)
diff --git a/target/linux/generic/pending-5.4/643-net-bridge-support-hardware-flow-table-offload.patch b/target/linux/generic/pending-5.4/643-net-bridge-support-hardware-flow-table-offload.patch
deleted file mode 100644
index fcfac748cb..0000000000
--- a/target/linux/generic/pending-5.4/643-net-bridge-support-hardware-flow-table-offload.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 15 Mar 2018 20:50:37 +0100
-Subject: [PATCH] net: bridge: support hardware flow table offload
-
-Look up the real device and pass it on
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/bridge/br_device.c
-+++ b/net/bridge/br_device.c
-@@ -14,6 +14,10 @@
- #include <linux/ethtool.h>
- #include <linux/list.h>
- #include <linux/netfilter_bridge.h>
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#endif
- 
- #include <linux/uaccess.h>
- #include "br_private.h"
-@@ -384,6 +388,28 @@ static const struct ethtool_ops br_ethto
- 	.get_link	= ethtool_op_get_link,
- };
- 
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+static int br_flow_offload_check(struct flow_offload_hw_path *path)
-+{
-+	struct net_device *dev = path->dev;
-+	struct net_bridge *br = netdev_priv(dev);
-+	struct net_bridge_fdb_entry *dst;
-+
-+	if (!(path->flags & FLOW_OFFLOAD_PATH_ETHERNET))
-+		return -EINVAL;
-+
-+	dst = br_fdb_find_rcu(br, path->eth_dest, path->vlan_id);
-+	if (!dst || !dst->dst)
-+		return -ENOENT;
-+
-+	path->dev = dst->dst->dev;
-+	if (path->dev->netdev_ops->ndo_flow_offload_check)
-+		return path->dev->netdev_ops->ndo_flow_offload_check(path);
-+
-+	return 0;
-+}
-+#endif /* CONFIG_NF_FLOW_TABLE */
-+
- static const struct net_device_ops br_netdev_ops = {
- 	.ndo_open		 = br_dev_open,
- 	.ndo_stop		 = br_dev_stop,
-@@ -412,6 +438,9 @@ static const struct net_device_ops br_ne
- 	.ndo_bridge_setlink	 = br_setlink,
- 	.ndo_bridge_dellink	 = br_dellink,
- 	.ndo_features_check	 = passthru_features_check,
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	.ndo_flow_offload_check	 = br_flow_offload_check,
-+#endif
- };
- 
- static struct device_type br_type = {
diff --git a/target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch b/target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch
deleted file mode 100644
index b09b3bc5e8..0000000000
--- a/target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 15 Mar 2018 21:15:00 +0100
-Subject: [PATCH] net: pppoe: support hardware flow table offload
-
-Pass on the PPPoE session ID and the remote MAC address
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ppp/ppp_generic.c
-+++ b/drivers/net/ppp/ppp_generic.c
-@@ -53,6 +53,11 @@
- #include <net/net_namespace.h>
- #include <net/netns/generic.h>
- 
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#endif
-+
- #define PPP_VERSION	"2.4.2"
- 
- /*
-@@ -1378,12 +1383,37 @@ static void ppp_dev_priv_destructor(stru
- 		ppp_destroy_interface(ppp);
- }
- 
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+static int ppp_flow_offload_check(struct flow_offload_hw_path *path)
-+{
-+	struct ppp *ppp = netdev_priv(path->dev);
-+	struct ppp_channel *chan;
-+	struct channel *pch;
-+
-+	if (ppp->flags & SC_MULTILINK)
-+		return -EOPNOTSUPP;
-+
-+	if (list_empty(&ppp->channels))
-+		return -ENODEV;
-+
-+	pch = list_first_entry(&ppp->channels, struct channel, clist);
-+	chan = pch->chan;
-+	if (!chan->ops->flow_offload_check)
-+		return -EOPNOTSUPP;
-+
-+	return chan->ops->flow_offload_check(chan, path);
-+}
-+#endif /* CONFIG_NF_FLOW_TABLE */
-+
- static const struct net_device_ops ppp_netdev_ops = {
- 	.ndo_init	 = ppp_dev_init,
- 	.ndo_uninit      = ppp_dev_uninit,
- 	.ndo_start_xmit  = ppp_start_xmit,
- 	.ndo_do_ioctl    = ppp_net_ioctl,
- 	.ndo_get_stats64 = ppp_get_stats64,
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	.ndo_flow_offload_check = ppp_flow_offload_check,
-+#endif
- };
- 
- static struct device_type ppp_type = {
---- a/drivers/net/ppp/pppoe.c
-+++ b/drivers/net/ppp/pppoe.c
-@@ -73,6 +73,11 @@
- #include <linux/proc_fs.h>
- #include <linux/seq_file.h>
- 
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#endif
-+
- #include <linux/nsproxy.h>
- #include <net/net_namespace.h>
- #include <net/netns/generic.h>
-@@ -974,8 +979,36 @@ static int pppoe_xmit(struct ppp_channel
- 	return __pppoe_xmit(sk, skb);
- }
- 
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+static int pppoe_flow_offload_check(struct ppp_channel *chan,
-+				    struct flow_offload_hw_path *path)
-+{
-+	struct sock *sk = (struct sock *)chan->private;
-+	struct pppox_sock *po = pppox_sk(sk);
-+	struct net_device *dev = po->pppoe_dev;
-+
-+	if (sock_flag(sk, SOCK_DEAD) ||
-+	    !(sk->sk_state & PPPOX_CONNECTED) || !dev)
-+		return -ENODEV;
-+
-+	path->dev = po->pppoe_dev;
-+	path->flags |= FLOW_OFFLOAD_PATH_PPPOE;
-+	memcpy(path->eth_src, po->pppoe_dev->dev_addr, ETH_ALEN);
-+	memcpy(path->eth_dest, po->pppoe_pa.remote, ETH_ALEN);
-+	path->pppoe_sid = be16_to_cpu(po->num);
-+
-+	if (path->dev->netdev_ops->ndo_flow_offload_check)
-+		return path->dev->netdev_ops->ndo_flow_offload_check(path);
-+
-+	return 0;
-+}
-+#endif /* CONFIG_NF_FLOW_TABLE */
-+
- static const struct ppp_channel_ops pppoe_chan_ops = {
- 	.start_xmit = pppoe_xmit,
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	.flow_offload_check = pppoe_flow_offload_check,
-+#endif
- };
- 
- static int pppoe_recvmsg(struct socket *sock, struct msghdr *m,
---- a/include/linux/ppp_channel.h
-+++ b/include/linux/ppp_channel.h
-@@ -28,6 +28,10 @@ struct ppp_channel_ops {
- 	int	(*start_xmit)(struct ppp_channel *, struct sk_buff *);
- 	/* Handle an ioctl call that has come in via /dev/ppp. */
- 	int	(*ioctl)(struct ppp_channel *, unsigned int, unsigned long);
-+
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	int	(*flow_offload_check)(struct ppp_channel *, struct flow_offload_hw_path *);
-+#endif
- };
- 
- struct ppp_channel {
diff --git a/target/linux/generic/pending-5.4/645-netfilter-nf_flow_table-rework-hardware-offload-time.patch b/target/linux/generic/pending-5.4/645-netfilter-nf_flow_table-rework-hardware-offload-time.patch
deleted file mode 100644
index 3c44c29273..0000000000
--- a/target/linux/generic/pending-5.4/645-netfilter-nf_flow_table-rework-hardware-offload-time.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 25 Mar 2018 21:10:55 +0200
-Subject: [PATCH] netfilter: nf_flow_table: rework hardware offload timeout
- handling
-
-Some offload implementations send keepalive packets + explicit
-notifications of TCP FIN/RST packets. In this case it is more convenient
-to simply let the driver update flow->timeout handling and use the
-regular flow offload gc step.
-
-For drivers that manage their own lifetime, a separate flag can be set
-to avoid gc timeouts.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -75,6 +75,7 @@ struct flow_offload_tuple_rhash {
- #define FLOW_OFFLOAD_DYING	0x4
- #define FLOW_OFFLOAD_TEARDOWN	0x8
- #define FLOW_OFFLOAD_HW		0x10
-+#define FLOW_OFFLOAD_KEEP	0x20
- 
- struct flow_offload {
- 	struct flow_offload_tuple_rhash		tuplehash[FLOW_OFFLOAD_DIR_MAX];
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -370,7 +370,7 @@ static void nf_flow_offload_gc_step(stru
- 	if (!teardown)
- 		nf_ct_offload_timeout(flow);
- 
--	if (nf_flow_in_hw(flow) && !teardown)
-+	if ((flow->flags & FLOW_OFFLOAD_KEEP) && !teardown)
- 		return;
- 
- 	if (nf_flow_has_expired(flow) || teardown)
diff --git a/target/linux/generic/pending-5.4/646-netfilter-nf_flow_table-rework-private-driver-data.patch b/target/linux/generic/pending-5.4/646-netfilter-nf_flow_table-rework-private-driver-data.patch
deleted file mode 100644
index 159ad8a0aa..0000000000
--- a/target/linux/generic/pending-5.4/646-netfilter-nf_flow_table-rework-private-driver-data.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 27 Apr 2018 14:42:14 +0200
-Subject: [PATCH] netfilter: nf_flow_table: rework private driver data
-
-Move the timeout out of the union, since it can be shared between the
-driver and the stack. Add a private pointer that the driver can use to
-point to its own data structures
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -80,9 +80,10 @@ struct flow_offload_tuple_rhash {
- struct flow_offload {
- 	struct flow_offload_tuple_rhash		tuplehash[FLOW_OFFLOAD_DIR_MAX];
- 	u32					flags;
-+	u32					timeout;
- 	union {
- 		/* Your private driver data here. */
--		u32		timeout;
-+		void *priv;
- 	};
- };
- 
diff --git a/target/linux/generic/pending-5.4/647-net-dsa-support-hardware-flow-table-offload.patch b/target/linux/generic/pending-5.4/647-net-dsa-support-hardware-flow-table-offload.patch
deleted file mode 100644
index 91aae5b65c..0000000000
--- a/target/linux/generic/pending-5.4/647-net-dsa-support-hardware-flow-table-offload.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 17 Sep 2020 18:41:23 +0200
-Subject: [PATCH] net: dsa: support hardware flow table offload
-
-Look up the master device and the port id
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -90,6 +90,7 @@ struct flow_offload {
- #define FLOW_OFFLOAD_PATH_ETHERNET	BIT(0)
- #define FLOW_OFFLOAD_PATH_VLAN		BIT(1)
- #define FLOW_OFFLOAD_PATH_PPPOE		BIT(2)
-+#define FLOW_OFFLOAD_PATH_DSA		BIT(3)
- 
- struct flow_offload_hw_path {
- 	struct net_device *dev;
-@@ -100,6 +101,7 @@ struct flow_offload_hw_path {
- 	u16 vlan_proto;
- 	u16 vlan_id;
- 	u16 pppoe_sid;
-+	u16 dsa_port;
- };
- 
- #define NF_FLOW_TIMEOUT (30 * HZ)
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -19,6 +19,10 @@
- #include <linux/if_bridge.h>
- #include <linux/netpoll.h>
- #include <linux/ptp_classify.h>
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#endif
- 
- #include "dsa_priv.h"
- 
-@@ -1226,6 +1230,27 @@ static struct devlink_port *dsa_slave_ge
- 	return dp->ds->devlink ? &dp->devlink_port : NULL;
- }
- 
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+static int dsa_flow_offload_check(struct flow_offload_hw_path *path)
-+{
-+	struct net_device *dev = path->dev;
-+	struct dsa_port *dp;
-+
-+	if (!(path->flags & FLOW_OFFLOAD_PATH_ETHERNET))
-+		return -EINVAL;
-+
-+	dp = dsa_slave_to_port(dev);
-+	path->dsa_port = dp->index;
-+	path->dev = dsa_slave_to_master(dev);
-+	path->flags |= FLOW_OFFLOAD_PATH_DSA;
-+
-+	if (path->dev->netdev_ops->ndo_flow_offload_check)
-+		return path->dev->netdev_ops->ndo_flow_offload_check(path);
-+
-+	return 0;
-+}
-+#endif /* CONFIG_NF_FLOW_TABLE */
-+
- static const struct net_device_ops dsa_slave_netdev_ops = {
- 	.ndo_open	 	= dsa_slave_open,
- 	.ndo_stop		= dsa_slave_close,
-@@ -1250,6 +1275,9 @@ static const struct net_device_ops dsa_s
- 	.ndo_vlan_rx_add_vid	= dsa_slave_vlan_rx_add_vid,
- 	.ndo_vlan_rx_kill_vid	= dsa_slave_vlan_rx_kill_vid,
- 	.ndo_get_devlink_port	= dsa_slave_get_devlink_port,
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	.ndo_flow_offload_check	 = dsa_flow_offload_check,
-+#endif
- };
- 
- static struct device_type dsa_type = {
diff --git a/target/linux/generic/pending-5.4/655-increase_skb_pad.patch b/target/linux/generic/pending-5.4/655-increase_skb_pad.patch
deleted file mode 100644
index e325301d3c..0000000000
--- a/target/linux/generic/pending-5.4/655-increase_skb_pad.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance
-
-lede-commit: 6f89cffc9add6939d44a6b54cf9a5e77849aa7fd
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/skbuff.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -2650,7 +2650,7 @@ static inline int pskb_network_may_pull(
-  * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
-  */
- #ifndef NET_SKB_PAD
--#define NET_SKB_PAD	max(32, L1_CACHE_BYTES)
-+#define NET_SKB_PAD	max(64, L1_CACHE_BYTES)
- #endif
- 
- int ___pskb_trim(struct sk_buff *skb, unsigned int len);
diff --git a/target/linux/generic/pending-5.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch b/target/linux/generic/pending-5.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
deleted file mode 100644
index 39f7af29d9..0000000000
--- a/target/linux/generic/pending-5.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
+++ /dev/null
@@ -1,501 +0,0 @@
-From: Steven Barth <steven@midlink.org>
-Subject: Add support for MAP-E FMRs (mesh mode)
-
-MAP-E FMRs (draft-ietf-softwire-map-10) are rules for IPv4-communication
-between MAP CEs (mesh mode) without the need to forward such data to a
-border relay. This is similar to how 6rd works but for IPv4 over IPv6.
-
-Signed-off-by: Steven Barth <cyrus@openwrt.org>
----
- include/net/ip6_tunnel.h       |  13 ++
- include/uapi/linux/if_tunnel.h |  13 ++
- net/ipv6/ip6_tunnel.c          | 276 +++++++++++++++++++++++++++++++++++++++--
- 3 files changed, 291 insertions(+), 11 deletions(-)
-
---- a/include/net/ip6_tunnel.h
-+++ b/include/net/ip6_tunnel.h
-@@ -18,6 +18,18 @@
- /* determine capability on a per-packet basis */
- #define IP6_TNL_F_CAP_PER_PACKET 0x40000
- 
-+/* IPv6 tunnel FMR */
-+struct __ip6_tnl_fmr {
-+	struct __ip6_tnl_fmr *next; /* next fmr in list */
-+	struct in6_addr ip6_prefix;
-+	struct in_addr ip4_prefix;
-+
-+	__u8 ip6_prefix_len;
-+	__u8 ip4_prefix_len;
-+	__u8 ea_len;
-+	__u8 offset;
-+};
-+
- struct __ip6_tnl_parm {
- 	char name[IFNAMSIZ];	/* name of tunnel device */
- 	int link;		/* ifindex of underlying L2 interface */
-@@ -29,6 +41,7 @@ struct __ip6_tnl_parm {
- 	__u32 flags;		/* tunnel flags */
- 	struct in6_addr laddr;	/* local tunnel end-point address */
- 	struct in6_addr raddr;	/* remote tunnel end-point address */
-+	struct __ip6_tnl_fmr *fmrs;	/* FMRs */
- 
- 	__be16			i_flags;
- 	__be16			o_flags;
---- a/include/uapi/linux/if_tunnel.h
-+++ b/include/uapi/linux/if_tunnel.h
-@@ -77,10 +77,23 @@ enum {
- 	IFLA_IPTUN_ENCAP_DPORT,
- 	IFLA_IPTUN_COLLECT_METADATA,
- 	IFLA_IPTUN_FWMARK,
-+	IFLA_IPTUN_FMRS,
- 	__IFLA_IPTUN_MAX,
- };
- #define IFLA_IPTUN_MAX	(__IFLA_IPTUN_MAX - 1)
- 
-+enum {
-+	IFLA_IPTUN_FMR_UNSPEC,
-+	IFLA_IPTUN_FMR_IP6_PREFIX,
-+	IFLA_IPTUN_FMR_IP4_PREFIX,
-+	IFLA_IPTUN_FMR_IP6_PREFIX_LEN,
-+	IFLA_IPTUN_FMR_IP4_PREFIX_LEN,
-+	IFLA_IPTUN_FMR_EA_LEN,
-+	IFLA_IPTUN_FMR_OFFSET,
-+	__IFLA_IPTUN_FMR_MAX,
-+};
-+#define IFLA_IPTUN_FMR_MAX (__IFLA_IPTUN_FMR_MAX - 1)
-+
- enum tunnel_encap_types {
- 	TUNNEL_ENCAP_NONE,
- 	TUNNEL_ENCAP_FOU,
---- a/net/ipv6/ip6_tunnel.c
-+++ b/net/ipv6/ip6_tunnel.c
-@@ -11,6 +11,9 @@
-  *      linux/net/ipv6/sit.c and linux/net/ipv4/ipip.c
-  *
-  *      RFC 2473
-+ *
-+ *      Changes:
-+ *      Steven Barth <cyrus@openwrt.org>:           MAP-E FMR support
-  */
- 
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-@@ -67,9 +70,9 @@ static bool log_ecn_error = true;
- module_param(log_ecn_error, bool, 0644);
- MODULE_PARM_DESC(log_ecn_error, "Log packets received with corrupted ECN");
- 
--static u32 HASH(const struct in6_addr *addr1, const struct in6_addr *addr2)
-+static u32 HASH(const struct in6_addr *addr)
- {
--	u32 hash = ipv6_addr_hash(addr1) ^ ipv6_addr_hash(addr2);
-+	u32 hash = ipv6_addr_hash(addr);
- 
- 	return hash_32(hash, IP6_TUNNEL_HASH_SIZE_SHIFT);
- }
-@@ -136,20 +139,29 @@ static struct net_device_stats *ip6_get_
- static struct ip6_tnl *
- ip6_tnl_lookup(struct net *net, const struct in6_addr *remote, const struct in6_addr *local)
- {
--	unsigned int hash = HASH(remote, local);
-+	unsigned int hash = HASH(local);
- 	struct ip6_tnl *t;
- 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
- 	struct in6_addr any;
-+	struct __ip6_tnl_fmr *fmr;
- 
- 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
--		if (ipv6_addr_equal(local, &t->parms.laddr) &&
--		    ipv6_addr_equal(remote, &t->parms.raddr) &&
--		    (t->dev->flags & IFF_UP))
-+		if (!ipv6_addr_equal(local, &t->parms.laddr) ||
-+				!(t->dev->flags & IFF_UP))
-+			continue;
-+
-+		if (ipv6_addr_equal(remote, &t->parms.raddr))
- 			return t;
-+
-+		for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
-+			if (ipv6_prefix_equal(remote, &fmr->ip6_prefix,
-+					fmr->ip6_prefix_len))
-+				return t;
-+		}
- 	}
- 
- 	memset(&any, 0, sizeof(any));
--	hash = HASH(&any, local);
-+	hash = HASH(local);
- 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
- 		if (ipv6_addr_equal(local, &t->parms.laddr) &&
- 		    ipv6_addr_any(&t->parms.raddr) &&
-@@ -157,7 +169,7 @@ ip6_tnl_lookup(struct net *net, const st
- 			return t;
- 	}
- 
--	hash = HASH(remote, &any);
-+	hash = HASH(&any);
- 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
- 		if (ipv6_addr_equal(remote, &t->parms.raddr) &&
- 		    ipv6_addr_any(&t->parms.laddr) &&
-@@ -197,7 +209,7 @@ ip6_tnl_bucket(struct ip6_tnl_net *ip6n,
- 
- 	if (!ipv6_addr_any(remote) || !ipv6_addr_any(local)) {
- 		prio = 1;
--		h = HASH(remote, local);
-+		h = HASH(local);
- 	}
- 	return &ip6n->tnls[prio][h];
- }
-@@ -377,6 +389,12 @@ ip6_tnl_dev_uninit(struct net_device *de
- 	struct net *net = t->net;
- 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
- 
-+	while (t->parms.fmrs) {
-+		struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
-+		kfree(t->parms.fmrs);
-+		t->parms.fmrs = next;
-+	}
-+
- 	if (dev == ip6n->fb_tnl_dev)
- 		RCU_INIT_POINTER(ip6n->tnls_wc[0], NULL);
- 	else
-@@ -766,6 +784,107 @@ int ip6_tnl_rcv_ctl(struct ip6_tnl *t,
- }
- EXPORT_SYMBOL_GPL(ip6_tnl_rcv_ctl);
- 
-+/**
-+ * ip4ip6_fmr_calc - calculate target / source IPv6-address based on FMR
-+ *   @dest: destination IPv6 address buffer
-+ *   @skb: received socket buffer
-+ *   @fmr: MAP FMR
-+ *   @xmit: Calculate for xmit or rcv
-+ **/
-+static void ip4ip6_fmr_calc(struct in6_addr *dest,
-+		const struct iphdr *iph, const uint8_t *end,
-+		const struct __ip6_tnl_fmr *fmr, bool xmit)
-+{
-+	int psidlen = fmr->ea_len - (32 - fmr->ip4_prefix_len);
-+	u8 *portp = NULL;
-+	bool use_dest_addr;
-+	const struct iphdr *dsth = iph;
-+
-+	if ((u8*)dsth >= end)
-+		return;
-+
-+	/* find significant IP header */
-+	if (iph->protocol == IPPROTO_ICMP) {
-+		struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
-+		if (ih && ((u8*)&ih[1]) <= end && (
-+			ih->type == ICMP_DEST_UNREACH ||
-+			ih->type == ICMP_SOURCE_QUENCH ||
-+			ih->type == ICMP_TIME_EXCEEDED ||
-+			ih->type == ICMP_PARAMETERPROB ||
-+			ih->type == ICMP_REDIRECT))
-+				dsth = (const struct iphdr*)&ih[1];
-+	}
-+
-+	/* in xmit-path use dest port by default and source port only if
-+		this is an ICMP reply to something else; vice versa in rcv-path */
-+	use_dest_addr = (xmit && dsth == iph) || (!xmit && dsth != iph);
-+
-+	/* get dst port */
-+	if (((u8*)&dsth[1]) <= end && (
-+		dsth->protocol == IPPROTO_UDP ||
-+		dsth->protocol == IPPROTO_TCP ||
-+		dsth->protocol == IPPROTO_SCTP ||
-+		dsth->protocol == IPPROTO_DCCP)) {
-+			/* for UDP, TCP, SCTP and DCCP source and dest port
-+			follow IPv4 header directly */
-+			portp = ((u8*)dsth) + dsth->ihl * 4;
-+
-+			if (use_dest_addr)
-+				portp += sizeof(u16);
-+	} else if (iph->protocol == IPPROTO_ICMP) {
-+		struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
-+
-+		/* use icmp identifier as port */
-+		if (((u8*)&ih) <= end && (
-+		    (use_dest_addr && (
-+		    ih->type == ICMP_ECHOREPLY ||
-+			ih->type == ICMP_TIMESTAMPREPLY ||
-+			ih->type == ICMP_INFO_REPLY ||
-+			ih->type == ICMP_ADDRESSREPLY)) ||
-+			(!use_dest_addr && (
-+			ih->type == ICMP_ECHO ||
-+			ih->type == ICMP_TIMESTAMP ||
-+			ih->type == ICMP_INFO_REQUEST ||
-+			ih->type == ICMP_ADDRESS)
-+			)))
-+				portp = (u8*)&ih->un.echo.id;
-+	}
-+
-+	if ((portp && &portp[2] <= end) || psidlen == 0) {
-+		int frombyte = fmr->ip6_prefix_len / 8;
-+		int fromrem = fmr->ip6_prefix_len % 8;
-+		int bytes = sizeof(struct in6_addr) - frombyte;
-+		const u32 *addr = (use_dest_addr) ? &iph->daddr : &iph->saddr;
-+		u64 eabits = ((u64)ntohl(*addr)) << (32 + fmr->ip4_prefix_len);
-+		u64 t = 0;
-+
-+		/* extract PSID from port and add it to eabits */
-+		u16 psidbits = 0;
-+		if (psidlen > 0) {
-+			psidbits = ((u16)portp[0]) << 8 | ((u16)portp[1]);
-+			psidbits >>= 16 - psidlen - fmr->offset;
-+			psidbits = (u16)(psidbits << (16 - psidlen));
-+			eabits |= ((u64)psidbits) << (48 - (fmr->ea_len - psidlen));
-+		}
-+
-+		/* rewrite destination address */
-+		*dest = fmr->ip6_prefix;
-+		memcpy(&dest->s6_addr[10], addr, sizeof(*addr));
-+		dest->s6_addr16[7] = htons(psidbits >> (16 - psidlen));
-+
-+		if (bytes > sizeof(u64))
-+			bytes = sizeof(u64);
-+
-+		/* insert eabits */
-+		memcpy(&t, &dest->s6_addr[frombyte], bytes);
-+		t = be64_to_cpu(t) & ~(((((u64)1) << fmr->ea_len) - 1)
-+			<< (64 - fmr->ea_len - fromrem));
-+		t = cpu_to_be64(t | (eabits >> fromrem));
-+		memcpy(&dest->s6_addr[frombyte], &t, bytes);
-+	}
-+}
-+
-+
- static int __ip6_tnl_rcv(struct ip6_tnl *tunnel, struct sk_buff *skb,
- 			 const struct tnl_ptk_info *tpi,
- 			 struct metadata_dst *tun_dst,
-@@ -818,6 +937,27 @@ static int __ip6_tnl_rcv(struct ip6_tnl
- 	skb_reset_network_header(skb);
- 	memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
- 
-+	if (tpi->proto == htons(ETH_P_IP) && tunnel->parms.fmrs &&
-+		!ipv6_addr_equal(&ipv6h->saddr, &tunnel->parms.raddr)) {
-+			/* Packet didn't come from BR, so lookup FMR */
-+			struct __ip6_tnl_fmr *fmr;
-+			struct in6_addr expected = tunnel->parms.raddr;
-+			for (fmr = tunnel->parms.fmrs; fmr; fmr = fmr->next)
-+				if (ipv6_prefix_equal(&ipv6h->saddr,
-+					&fmr->ip6_prefix, fmr->ip6_prefix_len))
-+						break;
-+
-+			/* Check that IPv6 matches IPv4 source to prevent spoofing */
-+			if (fmr)
-+				ip4ip6_fmr_calc(&expected, ip_hdr(skb),
-+						skb_tail_pointer(skb), fmr, false);
-+
-+			if (!ipv6_addr_equal(&ipv6h->saddr, &expected)) {
-+				rcu_read_unlock();
-+				goto drop;
-+			}
-+	}
-+
- 	__skb_tunnel_rx(skb, tunnel->dev, tunnel->net);
- 
- 	err = dscp_ecn_decapsulate(tunnel, ipv6h, skb);
-@@ -958,6 +1098,7 @@ static void init_tel_txopt(struct ipv6_t
- 	opt->ops.opt_nflen = 8;
- }
- 
-+
- /**
-  * ip6_tnl_addr_conflict - compare packet addresses to tunnel's own
-  *   @t: the outgoing tunnel device
-@@ -1310,6 +1451,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
- {
- 	struct ip6_tnl *t = netdev_priv(dev);
- 	struct ipv6hdr *ipv6h;
-+	struct __ip6_tnl_fmr *fmr;
- 	int encap_limit = -1;
- 	__u16 offset;
- 	struct flowi6 fl6;
-@@ -1375,6 +1517,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
- 	fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL);
- 	dsfield = INET_ECN_encapsulate(dsfield, ipv6_get_dsfield(ipv6h));
- 
-+	/* try to find matching FMR */
-+	for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
-+		unsigned mshift = 32 - fmr->ip4_prefix_len;
-+		if (ntohl(fmr->ip4_prefix.s_addr) >> mshift ==
-+				ntohl(ip_hdr(skb)->daddr) >> mshift)
-+			break;
-+	}
-+
-+	/* change dstaddr according to FMR */
-+	if (fmr)
-+		ip4ip6_fmr_calc(&fl6.daddr, ip_hdr(skb), skb_tail_pointer(skb), fmr, true);
-+
- 	if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
- 		return -1;
- 
-@@ -1504,6 +1658,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
- 	t->parms.link = p->link;
- 	t->parms.proto = p->proto;
- 	t->parms.fwmark = p->fwmark;
-+
-+	while (t->parms.fmrs) {
-+		struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
-+		kfree(t->parms.fmrs);
-+		t->parms.fmrs = next;
-+	}
-+	t->parms.fmrs = p->fmrs;
-+
- 	dst_cache_reset(&t->dst_cache);
- 	ip6_tnl_link_config(t);
- 	return 0;
-@@ -1542,6 +1704,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
- 	p->flowinfo = u->flowinfo;
- 	p->link = u->link;
- 	p->proto = u->proto;
-+	p->fmrs = NULL;
- 	memcpy(p->name, u->name, sizeof(u->name));
- }
- 
-@@ -1926,6 +2089,15 @@ static int ip6_tnl_validate(struct nlatt
- 	return 0;
- }
- 
-+static const struct nla_policy ip6_tnl_fmr_policy[IFLA_IPTUN_FMR_MAX + 1] = {
-+	[IFLA_IPTUN_FMR_IP6_PREFIX] = { .len = sizeof(struct in6_addr) },
-+	[IFLA_IPTUN_FMR_IP4_PREFIX] = { .len = sizeof(struct in_addr) },
-+	[IFLA_IPTUN_FMR_IP6_PREFIX_LEN] = { .type = NLA_U8 },
-+	[IFLA_IPTUN_FMR_IP4_PREFIX_LEN] = { .type = NLA_U8 },
-+	[IFLA_IPTUN_FMR_EA_LEN] = { .type = NLA_U8 },
-+	[IFLA_IPTUN_FMR_OFFSET] = { .type = NLA_U8 }
-+};
-+
- static void ip6_tnl_netlink_parms(struct nlattr *data[],
- 				  struct __ip6_tnl_parm *parms)
- {
-@@ -1963,6 +2135,46 @@ static void ip6_tnl_netlink_parms(struct
- 
- 	if (data[IFLA_IPTUN_FWMARK])
- 		parms->fwmark = nla_get_u32(data[IFLA_IPTUN_FWMARK]);
-+
-+	if (data[IFLA_IPTUN_FMRS]) {
-+		unsigned rem;
-+		struct nlattr *fmr;
-+		nla_for_each_nested(fmr, data[IFLA_IPTUN_FMRS], rem) {
-+			struct nlattr *fmrd[IFLA_IPTUN_FMR_MAX + 1], *c;
-+			struct __ip6_tnl_fmr *nfmr;
-+
-+			nla_parse_nested(fmrd, IFLA_IPTUN_FMR_MAX,
-+				fmr, ip6_tnl_fmr_policy, NULL);
-+
-+			if (!(nfmr = kzalloc(sizeof(*nfmr), GFP_KERNEL)))
-+				continue;
-+
-+			nfmr->offset = 6;
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX]))
-+				nla_memcpy(&nfmr->ip6_prefix, fmrd[IFLA_IPTUN_FMR_IP6_PREFIX],
-+					sizeof(nfmr->ip6_prefix));
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX]))
-+				nla_memcpy(&nfmr->ip4_prefix, fmrd[IFLA_IPTUN_FMR_IP4_PREFIX],
-+					sizeof(nfmr->ip4_prefix));
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX_LEN]))
-+				nfmr->ip6_prefix_len = nla_get_u8(c);
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX_LEN]))
-+				nfmr->ip4_prefix_len = nla_get_u8(c);
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_EA_LEN]))
-+				nfmr->ea_len = nla_get_u8(c);
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_OFFSET]))
-+				nfmr->offset = nla_get_u8(c);
-+
-+			nfmr->next = parms->fmrs;
-+			parms->fmrs = nfmr;
-+		}
-+	}
- }
- 
- static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[],
-@@ -2078,6 +2290,12 @@ static void ip6_tnl_dellink(struct net_d
- 
- static size_t ip6_tnl_get_size(const struct net_device *dev)
- {
-+	const struct ip6_tnl *t = netdev_priv(dev);
-+	struct __ip6_tnl_fmr *c;
-+	int fmrs = 0;
-+	for (c = t->parms.fmrs; c; c = c->next)
-+		++fmrs;
-+
- 	return
- 		/* IFLA_IPTUN_LINK */
- 		nla_total_size(4) +
-@@ -2107,6 +2325,24 @@ static size_t ip6_tnl_get_size(const str
- 		nla_total_size(0) +
- 		/* IFLA_IPTUN_FWMARK */
- 		nla_total_size(4) +
-+		/* IFLA_IPTUN_FMRS */
-+		nla_total_size(0) +
-+		(
-+			/* nest */
-+			nla_total_size(0) +
-+			/* IFLA_IPTUN_FMR_IP6_PREFIX */
-+			nla_total_size(sizeof(struct in6_addr)) +
-+			/* IFLA_IPTUN_FMR_IP4_PREFIX */
-+			nla_total_size(sizeof(struct in_addr)) +
-+			/* IFLA_IPTUN_FMR_EA_LEN */
-+			nla_total_size(1) +
-+			/* IFLA_IPTUN_FMR_IP6_PREFIX_LEN */
-+			nla_total_size(1) +
-+			/* IFLA_IPTUN_FMR_IP4_PREFIX_LEN */
-+			nla_total_size(1) +
-+			/* IFLA_IPTUN_FMR_OFFSET */
-+			nla_total_size(1)
-+		) * fmrs +
- 		0;
- }
- 
-@@ -2114,6 +2350,9 @@ static int ip6_tnl_fill_info(struct sk_b
- {
- 	struct ip6_tnl *tunnel = netdev_priv(dev);
- 	struct __ip6_tnl_parm *parm = &tunnel->parms;
-+	struct __ip6_tnl_fmr *c;
-+	int fmrcnt = 0;
-+	struct nlattr *fmrs;
- 
- 	if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
- 	    nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
-@@ -2123,9 +2362,27 @@ static int ip6_tnl_fill_info(struct sk_b
- 	    nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
- 	    nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
- 	    nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) ||
--	    nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark))
-+	    nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark) ||
-+	    !(fmrs = nla_nest_start(skb, IFLA_IPTUN_FMRS)))
- 		goto nla_put_failure;
- 
-+	for (c = parm->fmrs; c; c = c->next) {
-+		struct nlattr *fmr = nla_nest_start(skb, ++fmrcnt);
-+		if (!fmr ||
-+			nla_put(skb, IFLA_IPTUN_FMR_IP6_PREFIX,
-+				sizeof(c->ip6_prefix), &c->ip6_prefix) ||
-+			nla_put(skb, IFLA_IPTUN_FMR_IP4_PREFIX,
-+				sizeof(c->ip4_prefix), &c->ip4_prefix) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_IP6_PREFIX_LEN, c->ip6_prefix_len) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_IP4_PREFIX_LEN, c->ip4_prefix_len) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_EA_LEN, c->ea_len) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_OFFSET, c->offset))
-+				goto nla_put_failure;
-+
-+		nla_nest_end(skb, fmr);
-+	}
-+	nla_nest_end(skb, fmrs);
-+
- 	if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) ||
- 	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) ||
- 	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) ||
-@@ -2165,6 +2422,7 @@ static const struct nla_policy ip6_tnl_p
- 	[IFLA_IPTUN_ENCAP_DPORT]	= { .type = NLA_U16 },
- 	[IFLA_IPTUN_COLLECT_METADATA]	= { .type = NLA_FLAG },
- 	[IFLA_IPTUN_FWMARK]		= { .type = NLA_U32 },
-+	[IFLA_IPTUN_FMRS]		= { .type = NLA_NESTED },
- };
- 
- static struct rtnl_link_ops ip6_link_ops __read_mostly = {
diff --git a/target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
deleted file mode 100644
index 82c1e26831..0000000000
--- a/target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
+++ /dev/null
@@ -1,263 +0,0 @@
-From: Jonas Gorski <jogo@openwrt.org>
-Subject: ipv6: allow rejecting with "source address failed policy"
-
-RFC6204 L-14 requires rejecting traffic from invalid addresses with
-ICMPv6 Destination Unreachable, Code 5 (Source address failed ingress/
-egress policy) on the LAN side, so add an appropriate rule for that.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- include/net/netns/ipv6.h       |  1 +
- include/uapi/linux/fib_rules.h |  4 +++
- include/uapi/linux/rtnetlink.h |  1 +
- net/ipv4/fib_semantics.c       |  4 +++
- net/ipv4/fib_trie.c            |  1 +
- net/ipv4/ipmr.c                |  1 +
- net/ipv6/fib6_rules.c          |  4 +++
- net/ipv6/ip6mr.c               |  2 ++
- net/ipv6/route.c               | 58 +++++++++++++++++++++++++++++++++++++++++-
- 9 files changed, 75 insertions(+), 1 deletion(-)
-
---- a/include/net/netns/ipv6.h
-+++ b/include/net/netns/ipv6.h
-@@ -84,6 +84,7 @@ struct netns_ipv6 {
- 	unsigned int		fib6_rules_require_fldissect;
- 	bool			fib6_has_custom_rules;
- 	struct rt6_info         *ip6_prohibit_entry;
-+	struct rt6_info		*ip6_policy_failed_entry;
- 	struct rt6_info         *ip6_blk_hole_entry;
- 	struct fib6_table       *fib6_local_tbl;
- 	struct fib_rules_ops    *fib6_rules_ops;
---- a/include/uapi/linux/fib_rules.h
-+++ b/include/uapi/linux/fib_rules.h
-@@ -82,6 +82,10 @@ enum {
- 	FR_ACT_BLACKHOLE,	/* Drop without notification */
- 	FR_ACT_UNREACHABLE,	/* Drop with ENETUNREACH */
- 	FR_ACT_PROHIBIT,	/* Drop with EACCES */
-+	FR_ACT_RES9,
-+	FR_ACT_RES10,
-+	FR_ACT_RES11,
-+	FR_ACT_POLICY_FAILED,	/* Drop with EACCES */
- 	__FR_ACT_MAX,
- };
- 
---- a/include/uapi/linux/rtnetlink.h
-+++ b/include/uapi/linux/rtnetlink.h
-@@ -235,6 +235,7 @@ enum {
- 	RTN_THROW,		/* Not in this table		*/
- 	RTN_NAT,		/* Translate this address	*/
- 	RTN_XRESOLVE,		/* Use external resolver	*/
-+	RTN_POLICY_FAILED,	/* Failed ingress/egress policy */
- 	__RTN_MAX
- };
- 
---- a/net/ipv4/fib_semantics.c
-+++ b/net/ipv4/fib_semantics.c
-@@ -142,6 +142,10 @@ const struct fib_prop fib_props[RTN_MAX
- 		.error	= -EINVAL,
- 		.scope	= RT_SCOPE_NOWHERE,
- 	},
-+	[RTN_POLICY_FAILED] = {
-+		.error	= -EACCES,
-+		.scope	= RT_SCOPE_UNIVERSE,
-+	},
- };
- 
- static void rt_fibinfo_free(struct rtable __rcu **rtp)
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -2596,6 +2596,7 @@ static const char *const rtn_type_names[
- 	[RTN_THROW] = "THROW",
- 	[RTN_NAT] = "NAT",
- 	[RTN_XRESOLVE] = "XRESOLVE",
-+	[RTN_POLICY_FAILED] = "POLICY_FAILED",
- };
- 
- static inline const char *rtn_type(char *buf, size_t len, unsigned int t)
---- a/net/ipv4/ipmr.c
-+++ b/net/ipv4/ipmr.c
-@@ -173,6 +173,7 @@ static int ipmr_rule_action(struct fib_r
- 	case FR_ACT_UNREACHABLE:
- 		return -ENETUNREACH;
- 	case FR_ACT_PROHIBIT:
-+	case FR_ACT_POLICY_FAILED:
- 		return -EACCES;
- 	case FR_ACT_BLACKHOLE:
- 	default:
---- a/net/ipv6/fib6_rules.c
-+++ b/net/ipv6/fib6_rules.c
-@@ -216,6 +216,10 @@ static int __fib6_rule_action(struct fib
- 		err = -EACCES;
- 		rt = net->ipv6.ip6_prohibit_entry;
- 		goto discard_pkt;
-+	case FR_ACT_POLICY_FAILED:
-+		err = -EACCES;
-+		rt = net->ipv6.ip6_policy_failed_entry;
-+		goto discard_pkt;
- 	}
- 
- 	tb_id = fib_rule_get_table(rule, arg);
---- a/net/ipv6/ip6mr.c
-+++ b/net/ipv6/ip6mr.c
-@@ -161,6 +161,8 @@ static int ip6mr_rule_action(struct fib_
- 		return -ENETUNREACH;
- 	case FR_ACT_PROHIBIT:
- 		return -EACCES;
-+	case FR_ACT_POLICY_FAILED:
-+		return -EACCES;
- 	case FR_ACT_BLACKHOLE:
- 	default:
- 		return -EINVAL;
---- a/net/ipv6/route.c
-+++ b/net/ipv6/route.c
-@@ -94,6 +94,8 @@ static int		ip6_pkt_discard(struct sk_bu
- static int		ip6_pkt_discard_out(struct net *net, struct sock *sk, struct sk_buff *skb);
- static int		ip6_pkt_prohibit(struct sk_buff *skb);
- static int		ip6_pkt_prohibit_out(struct net *net, struct sock *sk, struct sk_buff *skb);
-+static int		ip6_pkt_policy_failed(struct sk_buff *skb);
-+static int		ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb);
- static void		ip6_link_failure(struct sk_buff *skb);
- static void		ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
- 					   struct sk_buff *skb, u32 mtu,
-@@ -327,6 +329,18 @@ static const struct rt6_info ip6_prohibi
- 	.rt6i_flags	= (RTF_REJECT | RTF_NONEXTHOP),
- };
- 
-+static const struct rt6_info ip6_policy_failed_entry_template = {
-+	.dst = {
-+		.__refcnt	= ATOMIC_INIT(1),
-+		.__use		= 1,
-+		.obsolete	= DST_OBSOLETE_FORCE_CHK,
-+		.error		= -EACCES,
-+		.input		= ip6_pkt_policy_failed,
-+		.output		= ip6_pkt_policy_failed_out,
-+	},
-+	.rt6i_flags	= (RTF_REJECT | RTF_NONEXTHOP),
-+};
-+
- static const struct rt6_info ip6_blk_hole_entry_template = {
- 	.dst = {
- 		.__refcnt	= ATOMIC_INIT(1),
-@@ -1048,6 +1062,7 @@ static const int fib6_prop[RTN_MAX + 1]
- 	[RTN_BLACKHOLE]	= -EINVAL,
- 	[RTN_UNREACHABLE] = -EHOSTUNREACH,
- 	[RTN_PROHIBIT]	= -EACCES,
-+	[RTN_POLICY_FAILED] = -EACCES,
- 	[RTN_THROW]	= -EAGAIN,
- 	[RTN_NAT]	= -EINVAL,
- 	[RTN_XRESOLVE]	= -EINVAL,
-@@ -1085,6 +1100,10 @@ static void ip6_rt_init_dst_reject(struc
- 		rt->dst.output = ip6_pkt_prohibit_out;
- 		rt->dst.input = ip6_pkt_prohibit;
- 		break;
-+	case RTN_POLICY_FAILED:
-+		rt->dst.output = ip6_pkt_policy_failed_out;
-+		rt->dst.input = ip6_pkt_policy_failed;
-+		break;
- 	case RTN_THROW:
- 	case RTN_UNREACHABLE:
- 	default:
-@@ -4453,6 +4472,17 @@ static int ip6_pkt_prohibit_out(struct n
- 	return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
- }
- 
-+static int ip6_pkt_policy_failed(struct sk_buff *skb)
-+{
-+	return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_INNOROUTES);
-+}
-+
-+static int ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb)
-+{
-+	skb->dev = skb_dst(skb)->dev;
-+	return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_OUTNOROUTES);
-+}
-+
- /*
-  *	Allocate a dst for local (unicast / anycast) address.
-  */
-@@ -4933,7 +4963,8 @@ static int rtm_to_fib6_config(struct sk_
- 	if (rtm->rtm_type == RTN_UNREACHABLE ||
- 	    rtm->rtm_type == RTN_BLACKHOLE ||
- 	    rtm->rtm_type == RTN_PROHIBIT ||
--	    rtm->rtm_type == RTN_THROW)
-+	    rtm->rtm_type == RTN_THROW ||
-+	    rtm->rtm_type == RTN_POLICY_FAILED)
- 		cfg->fc_flags |= RTF_REJECT;
- 
- 	if (rtm->rtm_type == RTN_LOCAL)
-@@ -6084,6 +6115,8 @@ static int ip6_route_dev_notify(struct n
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 		net->ipv6.ip6_prohibit_entry->dst.dev = dev;
- 		net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
-+		net->ipv6.ip6_policy_failed_entry->dst.dev = dev;
-+		net->ipv6.ip6_policy_failed_entry->rt6i_idev = in6_dev_get(dev);
- 		net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
- 		net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
- #endif
-@@ -6095,6 +6128,7 @@ static int ip6_route_dev_notify(struct n
- 		in6_dev_put_clear(&net->ipv6.ip6_null_entry->rt6i_idev);
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 		in6_dev_put_clear(&net->ipv6.ip6_prohibit_entry->rt6i_idev);
-+		in6_dev_put_clear(&net->ipv6.ip6_policy_failed_entry->rt6i_idev);
- 		in6_dev_put_clear(&net->ipv6.ip6_blk_hole_entry->rt6i_idev);
- #endif
- 	}
-@@ -6287,6 +6321,8 @@ static int __net_init ip6_route_net_init
- 
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 	net->ipv6.fib6_has_custom_rules = false;
-+
-+
- 	net->ipv6.ip6_prohibit_entry = kmemdup(&ip6_prohibit_entry_template,
- 					       sizeof(*net->ipv6.ip6_prohibit_entry),
- 					       GFP_KERNEL);
-@@ -6297,11 +6333,21 @@ static int __net_init ip6_route_net_init
- 			 ip6_template_metrics, true);
- 	INIT_LIST_HEAD(&net->ipv6.ip6_prohibit_entry->rt6i_uncached);
- 
-+	net->ipv6.ip6_policy_failed_entry =
-+				kmemdup(&ip6_policy_failed_entry_template,
-+				sizeof(*net->ipv6.ip6_policy_failed_entry), GFP_KERNEL);
-+	if (!net->ipv6.ip6_policy_failed_entry)
-+		goto out_ip6_prohibit_entry;
-+	net->ipv6.ip6_policy_failed_entry->dst.ops = &net->ipv6.ip6_dst_ops;
-+	dst_init_metrics(&net->ipv6.ip6_policy_failed_entry->dst,
-+			 ip6_template_metrics, true);
-+	INIT_LIST_HEAD(&net->ipv6.ip6_policy_failed_entry->rt6i_uncached);
-+
- 	net->ipv6.ip6_blk_hole_entry = kmemdup(&ip6_blk_hole_entry_template,
- 					       sizeof(*net->ipv6.ip6_blk_hole_entry),
- 					       GFP_KERNEL);
- 	if (!net->ipv6.ip6_blk_hole_entry)
--		goto out_ip6_prohibit_entry;
-+		goto out_ip6_policy_failed_entry;
- 	net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
- 	dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
- 			 ip6_template_metrics, true);
-@@ -6325,6 +6371,8 @@ out:
- 	return ret;
- 
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
-+out_ip6_policy_failed_entry:
-+	kfree(net->ipv6.ip6_policy_failed_entry);
- out_ip6_prohibit_entry:
- 	kfree(net->ipv6.ip6_prohibit_entry);
- out_ip6_null_entry:
-@@ -6344,6 +6392,7 @@ static void __net_exit ip6_route_net_exi
- 	kfree(net->ipv6.ip6_null_entry);
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 	kfree(net->ipv6.ip6_prohibit_entry);
-+	kfree(net->ipv6.ip6_policy_failed_entry);
- 	kfree(net->ipv6.ip6_blk_hole_entry);
- #endif
- 	dst_entries_destroy(&net->ipv6.ip6_dst_ops);
-@@ -6421,6 +6470,9 @@ void __init ip6_route_init_special_entri
- 	init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
- 	init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
- 	init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
-+	init_net.ipv6.ip6_policy_failed_entry->dst.dev = init_net.loopback_dev;
-+	init_net.ipv6.ip6_policy_failed_entry->rt6i_idev =
-+		in6_dev_get(init_net.loopback_dev);
-   #endif
- }
- 
diff --git a/target/linux/generic/pending-5.4/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch b/target/linux/generic/pending-5.4/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
deleted file mode 100644
index a92d8ec4c1..0000000000
--- a/target/linux/generic/pending-5.4/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From: Jonas Gorski <jogo@openwrt.org>
-Subject: net: provide defines for _POLICY_FAILED until all code is updated
-
-Upstream introduced ICMPV6_POLICY_FAIL for code 5 of destination
-unreachable, conflicting with our name.
-
-Add appropriate defines to allow our code to build with the new
-name until we have updated our local patches for older kernels
-and userspace packages.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- include/uapi/linux/fib_rules.h | 2 ++
- include/uapi/linux/icmpv6.h    | 2 ++
- include/uapi/linux/rtnetlink.h | 2 ++
- 3 files changed, 6 insertions(+)
-
---- a/include/uapi/linux/fib_rules.h
-+++ b/include/uapi/linux/fib_rules.h
-@@ -89,6 +89,8 @@ enum {
- 	__FR_ACT_MAX,
- };
- 
-+#define FR_ACT_FAILED_POLICY FR_ACT_POLICY_FAILED
-+
- #define FR_ACT_MAX (__FR_ACT_MAX - 1)
- 
- #endif
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -125,6 +125,8 @@ struct icmp6hdr {
- #define ICMPV6_POLICY_FAIL		5
- #define ICMPV6_REJECT_ROUTE		6
- 
-+#define ICMPV6_FAILED_POLICY		ICMPV6_POLICY_FAIL
-+
- /*
-  *	Codes for Time Exceeded
-  */
---- a/include/uapi/linux/rtnetlink.h
-+++ b/include/uapi/linux/rtnetlink.h
-@@ -239,6 +239,8 @@ enum {
- 	__RTN_MAX
- };
- 
-+#define RTN_FAILED_POLICY RTN_POLICY_FAILED
-+
- #define RTN_MAX (__RTN_MAX - 1)
- 
- 
diff --git a/target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch b/target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
deleted file mode 100644
index 9795a99bb5..0000000000
--- a/target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/netdevice.h |  2 ++
- include/linux/skbuff.h    |  3 ++-
- net/core/dev.c            | 48 +++++++++++++++++++++++++++++++++++++++++++++++
- net/ethernet/eth.c        | 18 +++++++++++++++++-
- 4 files changed, 69 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -1927,6 +1927,8 @@ struct net_device {
- 	struct netdev_hw_addr_list	mc;
- 	struct netdev_hw_addr_list	dev_addrs;
- 
-+	unsigned char		local_addr_mask[MAX_ADDR_LEN];
-+
- #ifdef CONFIG_SYSFS
- 	struct kset		*queues_kset;
- #endif
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -824,6 +824,7 @@ struct sk_buff {
- #ifdef CONFIG_TLS_DEVICE
- 	__u8			decrypted:1;
- #endif
-+	__u8			gro_skip:1;
- 
- #ifdef CONFIG_NET_SCHED
- 	__u16			tc_index;	/* traffic control index */
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -5541,6 +5541,9 @@ static enum gro_result dev_gro_receive(s
- 	int same_flow;
- 	int grow;
- 
-+	if (skb->gro_skip)
-+		goto normal;
-+
- 	if (netif_elide_gro(skb->dev))
- 		goto normal;
- 
-@@ -7484,6 +7487,48 @@ static void __netdev_adjacent_dev_unlink
- 					   &upper_dev->adj_list.lower);
- }
- 
-+static void __netdev_addr_mask(unsigned char *mask, const unsigned char *addr,
-+			       struct net_device *dev)
-+{
-+	int i;
-+
-+	for (i = 0; i < dev->addr_len; i++)
-+		mask[i] |= addr[i] ^ dev->dev_addr[i];
-+}
-+
-+static void __netdev_upper_mask(unsigned char *mask, struct net_device *dev,
-+				struct net_device *lower)
-+{
-+	struct net_device *cur;
-+	struct list_head *iter;
-+
-+	netdev_for_each_upper_dev_rcu(dev, cur, iter) {
-+		__netdev_addr_mask(mask, cur->dev_addr, lower);
-+		__netdev_upper_mask(mask, cur, lower);
-+	}
-+}
-+
-+static void __netdev_update_addr_mask(struct net_device *dev)
-+{
-+	unsigned char mask[MAX_ADDR_LEN];
-+	struct net_device *cur;
-+	struct list_head *iter;
-+
-+	memset(mask, 0, sizeof(mask));
-+	__netdev_upper_mask(mask, dev, dev);
-+	memcpy(dev->local_addr_mask, mask, dev->addr_len);
-+
-+	netdev_for_each_lower_dev(dev, cur, iter)
-+		__netdev_update_addr_mask(cur);
-+}
-+
-+static void netdev_update_addr_mask(struct net_device *dev)
-+{
-+	rcu_read_lock();
-+	__netdev_update_addr_mask(dev);
-+	rcu_read_unlock();
-+}
-+
- static int __netdev_upper_dev_link(struct net_device *dev,
- 				   struct net_device *upper_dev, bool master,
- 				   void *upper_priv, void *upper_info,
-@@ -7534,6 +7579,7 @@ static int __netdev_upper_dev_link(struc
- 	if (ret)
- 		return ret;
- 
-+	netdev_update_addr_mask(dev);
- 	ret = call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
- 					    &changeupper_info.info);
- 	ret = notifier_to_errno(ret);
-@@ -7627,6 +7673,7 @@ void netdev_upper_dev_unlink(struct net_
- 
- 	__netdev_adjacent_dev_unlink_neighbour(dev, upper_dev);
- 
-+	netdev_update_addr_mask(dev);
- 	call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
- 				      &changeupper_info.info);
- 
-@@ -8357,6 +8404,7 @@ int dev_set_mac_address(struct net_devic
- 	if (err)
- 		return err;
- 	dev->addr_assign_type = NET_ADDR_SET;
-+	netdev_update_addr_mask(dev);
- 	call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
- 	add_device_randomness(dev->dev_addr, dev->addr_len);
- 	return 0;
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -143,6 +143,18 @@ u32 eth_get_headlen(const struct net_dev
- }
- EXPORT_SYMBOL(eth_get_headlen);
- 
-+static inline bool
-+eth_check_local_mask(const void *addr1, const void *addr2, const void *mask)
-+{
-+	const u16 *a1 = addr1;
-+	const u16 *a2 = addr2;
-+	const u16 *m = mask;
-+
-+	return (((a1[0] ^ a2[0]) & ~m[0]) |
-+		((a1[1] ^ a2[1]) & ~m[1]) |
-+		((a1[2] ^ a2[2]) & ~m[2]));
-+}
-+
- /**
-  * eth_type_trans - determine the packet's protocol ID.
-  * @skb: received socket data
-@@ -174,6 +186,10 @@ __be16 eth_type_trans(struct sk_buff *sk
- 		} else {
- 			skb->pkt_type = PACKET_OTHERHOST;
- 		}
-+
-+		if (eth_check_local_mask(eth->h_dest, dev->dev_addr,
-+					 dev->local_addr_mask))
-+			skb->gro_skip = 1;
- 	}
- 
- 	/*
diff --git a/target/linux/generic/pending-5.4/682-of_net-add-mac-address-increment-support.patch b/target/linux/generic/pending-5.4/682-of_net-add-mac-address-increment-support.patch
deleted file mode 100644
index 464fc7e1d5..0000000000
--- a/target/linux/generic/pending-5.4/682-of_net-add-mac-address-increment-support.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From 844c273286f328acf0dab5fbd5d864366b4904dc Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Tue, 30 Mar 2021 18:21:14 +0200
-Subject: [PATCH] of_net: add mac-address-increment support
-
-Lots of embedded devices use the mac-address of other interface
-extracted from nvmem cells and increments it by one or two. Add two
-bindings to integrate this and directly use the right mac-address for
-the interface. Some example are some routers that use the gmac
-mac-address stored in the art partition and increments it by one for the
-wifi. mac-address-increment-byte bindings is used to tell what byte of
-the mac-address has to be increased (if not defined the last byte is
-increased) and mac-address-increment tells how much the byte decided
-early has to be increased.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- drivers/of/of_net.c | 43 +++++++++++++++++++++++++++++++++++++++----
- 1 file changed, 39 insertions(+), 4 deletions(-)
-
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -109,27 +109,62 @@ static int of_get_mac_addr_nvmem(struct
-  * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
-  * but is all zeros.
-  *
-+ * DT can tell the system to increment the mac-address after is extracted by
-+ * using:
-+ * - mac-address-increment-byte to decide what byte to increase
-+ *   (if not defined is increased the last byte)
-+ * - mac-address-increment to decide how much to increase. The value WILL
-+ *   overflow to other bytes if the increment is over 255 or the total
-+ *   increment will exceed 255 of the current byte.
-+ *   (example 00:01:02:03:04:ff + 1 == 00:01:02:03:05:00)
-+ *   (example 00:01:02:03:04:fe + 5 == 00:01:02:03:05:03)
-+ *
-  * Return: 0 on success and errno in case of error.
- */
- int of_get_mac_address(struct device_node *np, u8 *addr)
- {
-+	u32 inc_idx, mac_inc, mac_val;
- 	int ret;
- 
-+	/* Check first if the increment byte is present and valid.
-+	 * If not set assume to increment the last byte if found.
-+	 */
-+	if (of_property_read_u32(np, "mac-address-increment-byte", &inc_idx))
-+		inc_idx = 5;
-+	if (inc_idx < 3 || inc_idx > 5)
-+		return -EINVAL;
-+
- 	if (!np)
- 		return -ENODEV;
- 
- 	ret = of_get_mac_addr(np, "mac-address", addr);
- 	if (!ret)
--		return 0;
-+		goto found;
- 
- 	ret = of_get_mac_addr(np, "local-mac-address", addr);
- 	if (!ret)
--		return 0;
-+		goto found;
- 
- 	ret = of_get_mac_addr(np, "address", addr);
- 	if (!ret)
--		return 0;
-+		goto found;
-+
-+	ret = of_get_mac_addr_nvmem(np, addr);
-+	if (ret)
-+		return ret;
-+
-+found:
-+	if (!of_property_read_u32(np, "mac-address-increment", &mac_inc)) {
-+		/* Convert to a contiguous value */
-+		mac_val = (addr[3] << 16) + (addr[4] << 8) + addr[5];
-+		mac_val += mac_inc << 8 * (5-inc_idx);
-+
-+		/* Apply the incremented value handling overflow case */
-+		addr[3] = (mac_val >> 16) & 0xff;
-+		addr[4] = (mac_val >> 8) & 0xff;
-+		addr[5] = (mac_val >> 0) & 0xff;
-+	}
- 
--	return of_get_mac_addr_nvmem(np, addr);
-+	return ret;
- }
- EXPORT_SYMBOL(of_get_mac_address);
diff --git a/target/linux/generic/pending-5.4/683-of_net-add-mac-address-to-of-tree.patch b/target/linux/generic/pending-5.4/683-of_net-add-mac-address-to-of-tree.patch
deleted file mode 100644
index 448084b821..0000000000
--- a/target/linux/generic/pending-5.4/683-of_net-add-mac-address-to-of-tree.patch
+++ /dev/null
@@ -1,38 +0,0 @@
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -89,6 +89,27 @@ static int of_get_mac_addr_nvmem(struct
- 	return 0;
- }
- 
-+static int of_add_mac_address(struct device_node *np, u8* addr)
-+{
-+	struct property *prop;
-+
-+	prop = kzalloc(sizeof(*prop), GFP_KERNEL);
-+	if (!prop)
-+		return -ENOMEM;
-+
-+	prop->name = "mac-address";
-+	prop->length = ETH_ALEN;
-+	prop->value = kmemdup(addr, ETH_ALEN, GFP_KERNEL);
-+	if (!prop->value || of_update_property(np, prop))
-+		goto free;
-+
-+	return 0;
-+free:
-+	kfree(prop->value);
-+	kfree(prop);
-+	return -ENOMEM;
-+}
-+
- /**
-  * Search the device tree for the best MAC address to use.  'mac-address' is
-  * checked first, because that is supposed to contain to "most recent" MAC
-@@ -165,6 +186,7 @@ found:
- 		addr[5] = (mac_val >> 0) & 0xff;
- 	}
- 
-+	of_add_mac_address(np, addr);
- 	return ret;
- }
- EXPORT_SYMBOL(of_get_mac_address);
diff --git a/target/linux/generic/pending-5.4/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-5.4/703-phy-add-detach-callback-to-struct-phy_driver.patch
deleted file mode 100644
index e95cb6a4c5..0000000000
--- a/target/linux/generic/pending-5.4/703-phy-add-detach-callback-to-struct-phy_driver.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: generic: add detach callback to struct phy_driver
-
-lede-commit: fe61fc2d7d0b3fb348b502f68f98243b3ddf5867
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/phy/phy_device.c | 3 +++
- include/linux/phy.h          | 6 ++++++
- 2 files changed, 9 insertions(+)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -1465,6 +1465,9 @@ void phy_detach(struct phy_device *phyde
- 	struct module *ndev_owner = NULL;
- 	struct mii_bus *bus;
- 
-+	if (phydev->drv && phydev->drv->detach)
-+		phydev->drv->detach(phydev);
-+
- 	if (phydev->sysfs_links) {
- 		if (dev)
- 			sysfs_remove_link(&dev->dev.kobj, "phydev");
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -541,6 +541,12 @@ struct phy_driver {
- 	/* Override default interrupt handling */
- 	int (*handle_interrupt)(struct phy_device *phydev);
- 
-+	/*
-+	 * Called before an ethernet device is detached
-+	 * from the PHY.
-+	 */
-+	void (*detach)(struct phy_device *phydev);
-+
- 	/* Clears up any memory if needed */
- 	void (*remove)(struct phy_device *phydev);
- 
diff --git a/target/linux/generic/pending-5.4/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch b/target/linux/generic/pending-5.4/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch
deleted file mode 100644
index 90e0d0de83..0000000000
--- a/target/linux/generic/pending-5.4/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch
+++ /dev/null
@@ -1,177 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 27 Aug 2021 12:22:32 +0200
-Subject: [PATCH] bridge: add knob for filtering rx/tx BPDU packets on a port
-
-Some devices (e.g. wireless APs) can't have devices behind them be part of
-a bridge topology with redundant links, due to address limitations.
-Additionally, broadcast traffic on these devices is somewhat expensive, due to
-the low data rate and wakeups of clients in powersave mode.
-This knob can be used to ensure that BPDU packets are never sentor forwarded
-to/from these devices
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/linux/if_bridge.h
-+++ b/include/linux/if_bridge.h
-@@ -47,6 +47,7 @@ struct br_ip_list {
- #define BR_BCAST_FLOOD		BIT(14)
- #define BR_NEIGH_SUPPRESS	BIT(15)
- #define BR_ISOLATED		BIT(16)
-+#define BR_BPDU_FILTER		BIT(17)
- 
- #define BR_DEFAULT_AGEING_TIME	(300 * HZ)
- 
---- a/net/bridge/br_forward.c
-+++ b/net/bridge/br_forward.c
-@@ -191,6 +191,7 @@ out:
- void br_flood(struct net_bridge *br, struct sk_buff *skb,
- 	      enum br_pkt_type pkt_type, bool local_rcv, bool local_orig)
- {
-+	const unsigned char *dest = eth_hdr(skb)->h_dest;
- 	struct net_bridge_port *prev = NULL;
- 	struct net_bridge_port *p;
- 
-@@ -206,6 +207,10 @@ void br_flood(struct net_bridge *br, str
- 		case BR_PKT_MULTICAST:
- 			if (!(p->flags & BR_MCAST_FLOOD) && skb->dev != br->dev)
- 				continue;
-+			if ((p->flags & BR_BPDU_FILTER) &&
-+			    unlikely(is_link_local_ether_addr(dest) &&
-+				     dest[5] == 0))
-+				continue;
- 			break;
- 		case BR_PKT_BROADCAST:
- 			if (!(p->flags & BR_BCAST_FLOOD) && skb->dev != br->dev)
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -300,6 +300,8 @@ rx_handler_result_t br_handle_frame(stru
- 		fwd_mask |= p->group_fwd_mask;
- 		switch (dest[5]) {
- 		case 0x00:	/* Bridge Group Address */
-+			if (p->flags & BR_BPDU_FILTER)
-+				goto drop;
- 			/* If STP is turned off,
- 			   then must forward to keep loop detection */
- 			if (p->br->stp_enabled == BR_NO_STP ||
---- a/net/bridge/br_sysfs_if.c
-+++ b/net/bridge/br_sysfs_if.c
-@@ -233,6 +233,7 @@ BRPORT_ATTR_FLAG(multicast_flood, BR_MCA
- BRPORT_ATTR_FLAG(broadcast_flood, BR_BCAST_FLOOD);
- BRPORT_ATTR_FLAG(neigh_suppress, BR_NEIGH_SUPPRESS);
- BRPORT_ATTR_FLAG(isolated, BR_ISOLATED);
-+BRPORT_ATTR_FLAG(bpdu_filter, BR_BPDU_FILTER);
- 
- #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
- static ssize_t show_multicast_router(struct net_bridge_port *p, char *buf)
-@@ -285,6 +286,7 @@ static const struct brport_attribute *br
- 	&brport_attr_group_fwd_mask,
- 	&brport_attr_neigh_suppress,
- 	&brport_attr_isolated,
-+	&brport_attr_bpdu_filter,
- 	&brport_attr_backup_port,
- 	NULL
- };
---- a/net/bridge/br_stp_bpdu.c
-+++ b/net/bridge/br_stp_bpdu.c
-@@ -80,7 +80,8 @@ void br_send_config_bpdu(struct net_brid
- {
- 	unsigned char buf[35];
- 
--	if (p->br->stp_enabled != BR_KERNEL_STP)
-+	if (p->br->stp_enabled != BR_KERNEL_STP ||
-+	    (p->flags & BR_BPDU_FILTER))
- 		return;
- 
- 	buf[0] = 0;
-@@ -125,7 +126,8 @@ void br_send_tcn_bpdu(struct net_bridge_
- {
- 	unsigned char buf[4];
- 
--	if (p->br->stp_enabled != BR_KERNEL_STP)
-+	if (p->br->stp_enabled != BR_KERNEL_STP ||
-+	    (p->flags & BR_BPDU_FILTER))
- 		return;
- 
- 	buf[0] = 0;
-@@ -168,6 +170,9 @@ void br_stp_rcv(const struct stp_proto *
- 	if (!(br->dev->flags & IFF_UP))
- 		goto out;
- 
-+	if (p->flags & BR_BPDU_FILTER)
-+		goto out;
-+
- 	if (p->state == BR_STATE_DISABLED)
- 		goto out;
- 
---- a/include/uapi/linux/if_link.h
-+++ b/include/uapi/linux/if_link.h
-@@ -340,6 +340,7 @@ enum {
- 	IFLA_BRPORT_NEIGH_SUPPRESS,
- 	IFLA_BRPORT_ISOLATED,
- 	IFLA_BRPORT_BACKUP_PORT,
-+	IFLA_BRPORT_BPDU_FILTER,
- 	__IFLA_BRPORT_MAX
- };
- #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
---- a/net/bridge/br_netlink.c
-+++ b/net/bridge/br_netlink.c
-@@ -137,6 +137,7 @@ static inline size_t br_port_info_size(v
- 		+ nla_total_size(1)	/* IFLA_BRPORT_VLAN_TUNNEL */
- 		+ nla_total_size(1)	/* IFLA_BRPORT_NEIGH_SUPPRESS */
- 		+ nla_total_size(1)	/* IFLA_BRPORT_ISOLATED */
-+		+ nla_total_size(1)	/* IFLA_BRPORT_BPDU_FILTER */
- 		+ nla_total_size(sizeof(struct ifla_bridge_id))	/* IFLA_BRPORT_ROOT_ID */
- 		+ nla_total_size(sizeof(struct ifla_bridge_id))	/* IFLA_BRPORT_BRIDGE_ID */
- 		+ nla_total_size(sizeof(u16))	/* IFLA_BRPORT_DESIGNATED_PORT */
-@@ -214,7 +215,8 @@ static int br_port_fill_attrs(struct sk_
- 	    nla_put_u16(skb, IFLA_BRPORT_GROUP_FWD_MASK, p->group_fwd_mask) ||
- 	    nla_put_u8(skb, IFLA_BRPORT_NEIGH_SUPPRESS,
- 		       !!(p->flags & BR_NEIGH_SUPPRESS)) ||
--	    nla_put_u8(skb, IFLA_BRPORT_ISOLATED, !!(p->flags & BR_ISOLATED)))
-+	    nla_put_u8(skb, IFLA_BRPORT_ISOLATED, !!(p->flags & BR_ISOLATED)) ||
-+	    nla_put_u8(skb, IFLA_BRPORT_BPDU_FILTER, !!(p->flags & BR_BPDU_FILTER)))
- 		return -EMSGSIZE;
- 
- 	timerval = br_timer_value(&p->message_age_timer);
-@@ -676,6 +678,7 @@ static const struct nla_policy br_port_p
- 	[IFLA_BRPORT_NEIGH_SUPPRESS] = { .type = NLA_U8 },
- 	[IFLA_BRPORT_ISOLATED]	= { .type = NLA_U8 },
- 	[IFLA_BRPORT_BACKUP_PORT] = { .type = NLA_U32 },
-+	[IFLA_BRPORT_BPDU_FILTER] = { .type = NLA_U8 },
- };
- 
- /* Change the state of the port and notify spanning tree */
-@@ -774,6 +777,10 @@ static int br_setport(struct net_bridge_
- 	if (err)
- 		return err;
- 
-+	err = br_set_port_flag(p, tb, IFLA_BRPORT_BPDU_FILTER, BR_BPDU_FILTER);
-+	if (err)
-+		return err;
-+
- 	br_vlan_tunnel_old = (p->flags & BR_VLAN_TUNNEL) ? true : false;
- 	err = br_set_port_flag(p, tb, IFLA_BRPORT_VLAN_TUNNEL, BR_VLAN_TUNNEL);
- 	if (err)
---- a/net/core/rtnetlink.c
-+++ b/net/core/rtnetlink.c
-@@ -55,7 +55,7 @@
- #include <net/net_namespace.h>
- 
- #define RTNL_MAX_TYPE		50
--#define RTNL_SLAVE_MAX_TYPE	36
-+#define RTNL_SLAVE_MAX_TYPE	37
- 
- struct rtnl_link {
- 	rtnl_doit_func		doit;
-@@ -4373,7 +4373,9 @@ int ndo_dflt_bridge_getlink(struct sk_bu
- 	    brport_nla_put_flag(skb, flags, mask,
- 				IFLA_BRPORT_UNICAST_FLOOD, BR_FLOOD) ||
- 	    brport_nla_put_flag(skb, flags, mask,
--				IFLA_BRPORT_PROXYARP, BR_PROXYARP)) {
-+				IFLA_BRPORT_PROXYARP, BR_PROXYARP) ||
-+	    brport_nla_put_flag(skb, flags, mask,
-+				IFLA_BRPORT_BPDU_FILTER, BR_BPDU_FILTER)) {
- 		nla_nest_cancel(skb, protinfo);
- 		goto nla_put_failure;
- 	}
diff --git a/target/linux/generic/pending-5.4/730-net-phy-at803x-fix-feature-detection.patch b/target/linux/generic/pending-5.4/730-net-phy-at803x-fix-feature-detection.patch
deleted file mode 100644
index f25952a2cc..0000000000
--- a/target/linux/generic/pending-5.4/730-net-phy-at803x-fix-feature-detection.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 97ca310aa18a93329ef5cd68c20de89761962f45 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 13 Jun 2021 12:19:36 +0200
-Subject: [PATCH] net: phy: at803x: fix feature detection
-
-AR8031/AR8033 have different status registers for copper
-and fiber operation. However, the extended status register
-is the same for both operation modes.
-
-As a result of that, ESTATUS_1000_XFULL is set to 1 even when
-operating in copper TP mode.
-
-Remove this mode from the supported link modes, as this driver
-currently only supports copper operation.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- drivers/net/phy/at803x.c | 30 +++++++++++++++++++++++++++++-
- 1 file changed, 29 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -411,6 +411,34 @@ static int at803x_aneg_done(struct phy_d
- 	return aneg_done;
- }
- 
-+static int at803x_get_features(struct phy_device *phydev)
-+{
-+	int err;
-+
-+	err = genphy_read_abilities(phydev);
-+	if (err)
-+		return err;
-+
-+	if (!(phydev->phy_id & phydev->drv->phy_id_mask) == (ATH8031_PHY_ID & phydev->drv->phy_id_mask))
-+		return 0;
-+
-+	/* AR8031/AR8033 have different status registers
-+	 * for copper and fiber operation. However, the
-+	 * extended status register is the same for both
-+	 * operation modes.
-+	 *
-+	 * As a result of that, ESTATUS_1000_XFULL is set
-+	 * to 1 even when operating in copper TP mode.
-+	 *
-+	 * Remove this mode from the supported link modes,
-+	 * as this driver currently only supports copper
-+	 * operation.
-+	 */
-+	linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
-+			   phydev->supported);
-+	return 0;
-+}
-+
- static int at803x_read_status(struct phy_device *phydev)
- {
- 	int ss, err, old_link = phydev->link;
-@@ -513,7 +541,7 @@ static struct phy_driver at803x_driver[]
- 	.resume			= at803x_resume,
- 	.read_page		= at803x_read_page,
- 	.write_page		= at803x_write_page,
--	/* PHY_GBIT_FEATURES */
-+	.get_features		= at803x_get_features,
- 	.read_status		= at803x_read_status,
- 	.aneg_done		= at803x_aneg_done,
- 	.ack_interrupt		= &at803x_ack_interrupt,
diff --git a/target/linux/generic/pending-5.4/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch b/target/linux/generic/pending-5.4/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch
deleted file mode 100644
index 6648d10c81..0000000000
--- a/target/linux/generic/pending-5.4/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From 283b211aa01bdae94dffb3121655dbb20bf237f4 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 3 Dec 2019 15:22:05 +0000
-Subject: net: sfp: avoid tx-fault with Nokia GPON module
-
-The Nokia GPON module can hold tx-fault active while it is initialising
-which can take up to 60s. Avoid this causing the module to be declared
-faulty after the SFP MSA defined non-cooled module timeout.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 42 ++++++++++++++++++++++++++++++------------
- 1 file changed, 30 insertions(+), 12 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -155,10 +155,20 @@ static const enum gpiod_flags gpio_flags
- 	GPIOD_ASIS,
- };
- 
--#define T_WAIT		msecs_to_jiffies(50)
--#define T_INIT_JIFFIES	msecs_to_jiffies(300)
--#define T_RESET_US	10
--#define T_FAULT_RECOVER	msecs_to_jiffies(1000)
-+/* t_start_up (SFF-8431) or t_init (SFF-8472) is the time required for a
-+ * non-cooled module to initialise its laser safety circuitry. We wait
-+ * an initial T_WAIT period before we check the tx fault to give any PHY
-+ * on board (for a copper SFP) time to initialise.
-+ */
-+#define T_WAIT			msecs_to_jiffies(50)
-+#define T_START_UP		msecs_to_jiffies(300)
-+#define T_START_UP_BAD_GPON	msecs_to_jiffies(60000)
-+
-+/* t_reset is the time required to assert the TX_DISABLE signal to reset
-+ * an indicated TX_FAULT.
-+ */
-+#define T_RESET_US		10
-+#define T_FAULT_RECOVER		msecs_to_jiffies(1000)
- 
- /* SFP module presence detection is poor: the three MOD DEF signals are
-  * the same length on the PCB, which means it's possible for MOD DEF 0 to
-@@ -219,6 +229,7 @@ struct sfp {
- 
- 	struct sfp_eeprom_id id;
- 	unsigned int module_power_mW;
-+	unsigned int module_t_start_up;
- 
- #if IS_ENABLED(CONFIG_HWMON)
- 	struct sfp_diag diag;
-@@ -1742,6 +1753,12 @@ static int sfp_sm_mod_probe(struct sfp *
- 	if (ret < 0)
- 		return ret;
- 
-+	if (!memcmp(id.base.vendor_name, "ALCATELLUCENT   ", 16) &&
-+	    !memcmp(id.base.vendor_pn, "3FE46541AA      ", 16))
-+		sfp->module_t_start_up = T_START_UP_BAD_GPON;
-+	else
-+		sfp->module_t_start_up = T_START_UP;
-+
- 	return 0;
- }
- 
-@@ -1947,11 +1964,12 @@ static void sfp_sm_main(struct sfp *sfp,
- 			break;
- 
- 		if (sfp->state & SFP_F_TX_FAULT) {
--			/* Wait t_init before indicating that the link is up,
--			 * provided the current state indicates no TX_FAULT. If
--			 * TX_FAULT clears before this time, that's fine too.
-+			/* Wait up to t_init (SFF-8472) or t_start_up (SFF-8431)
-+			 * from the TX_DISABLE deassertion for the module to
-+			 * initialise, which is indicated by TX_FAULT
-+			 * deasserting.
- 			 */
--			timeout = T_INIT_JIFFIES;
-+			timeout = sfp->module_t_start_up;
- 			if (timeout > T_WAIT)
- 				timeout -= T_WAIT;
- 			else
-@@ -1968,8 +1986,8 @@ static void sfp_sm_main(struct sfp *sfp,
- 
- 	case SFP_S_INIT:
- 		if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
--			/* TX_FAULT is still asserted after t_init, so assume
--			 * there is a fault.
-+			/* TX_FAULT is still asserted after t_init or
-+			 * or t_start_up, so assume there is a fault.
- 			 */
- 			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
- 				     sfp->sm_retries == 5);
-@@ -1988,7 +2006,7 @@ static void sfp_sm_main(struct sfp *sfp,
- 	case SFP_S_INIT_TX_FAULT:
- 		if (event == SFP_E_TIMEOUT) {
- 			sfp_module_tx_fault_reset(sfp);
--			sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-+			sfp_sm_next(sfp, SFP_S_INIT, sfp->module_t_start_up);
- 		}
- 		break;
- 
-@@ -2012,7 +2030,7 @@ static void sfp_sm_main(struct sfp *sfp,
- 	case SFP_S_TX_FAULT:
- 		if (event == SFP_E_TIMEOUT) {
- 			sfp_module_tx_fault_reset(sfp);
--			sfp_sm_next(sfp, SFP_S_REINIT, T_INIT_JIFFIES);
-+			sfp_sm_next(sfp, SFP_S_REINIT, sfp->module_t_start_up);
- 		}
- 		break;
- 
diff --git a/target/linux/generic/pending-5.4/740-net-sfp-remove-incomplete-100BASE-FX-and-100BASE-LX-.patch b/target/linux/generic/pending-5.4/740-net-sfp-remove-incomplete-100BASE-FX-and-100BASE-LX-.patch
deleted file mode 100644
index 1abc34e94b..0000000000
--- a/target/linux/generic/pending-5.4/740-net-sfp-remove-incomplete-100BASE-FX-and-100BASE-LX-.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 29cd215aaf6c2050c43e4de03aee436c16f90b96 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 21 Nov 2019 17:27:14 +0000
-Subject: [PATCH 643/660] net: sfp: remove incomplete 100BASE-FX and 100BASE-LX
- support
-
-The 100BASE-FX and 100BASE-LX support assumes a PHY is present; this
-is probably an incorrect assumption. In any case, sfp_parse_support()
-will fail such a module. Let's stop pretending we support these
-modules.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp-bus.c |  4 +---
- drivers/net/phy/sfp.c     | 13 +------------
- 2 files changed, 2 insertions(+), 15 deletions(-)
-
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -342,9 +342,7 @@ phy_interface_t sfp_select_interface(str
- 	if (phylink_test(link_modes, 2500baseX_Full))
- 		return PHY_INTERFACE_MODE_2500BASEX;
- 
--	if (id->base.e1000_base_t ||
--	    id->base.e100_base_lx ||
--	    id->base.e100_base_fx)
-+	if (id->base.e1000_base_t)
- 		return PHY_INTERFACE_MODE_SGMII;
- 
- 	if (phylink_test(link_modes, 1000baseX_Full))
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1505,18 +1505,7 @@ static void sfp_sm_fault(struct sfp *sfp
- 
- static void sfp_sm_probe_for_phy(struct sfp *sfp)
- {
--	/* Setting the serdes link mode is guesswork: there's no
--	 * field in the EEPROM which indicates what mode should
--	 * be used.
--	 *
--	 * If it's a gigabit-only fiber module, it probably does
--	 * not have a PHY, so switch to 802.3z negotiation mode.
--	 * Otherwise, switch to SGMII mode (which is required to
--	 * support non-gigabit speeds) and probe for a PHY.
--	 */
--	if (sfp->id.base.e1000_base_t ||
--	    sfp->id.base.e100_base_lx ||
--	    sfp->id.base.e100_base_fx)
-+	if (sfp->id.base.e1000_base_t)
- 		sfp_sm_probe_phy(sfp);
- }
- 
diff --git a/target/linux/generic/pending-5.4/741-net-sfp-derive-interface-mode-from-ethtool-link-mode.patch b/target/linux/generic/pending-5.4/741-net-sfp-derive-interface-mode-from-ethtool-link-mode.patch
deleted file mode 100644
index 8158c78b0e..0000000000
--- a/target/linux/generic/pending-5.4/741-net-sfp-derive-interface-mode-from-ethtool-link-mode.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From dc45d9e04572b5cd6d32f51cdf9f62b18022e6dd Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 21 Nov 2019 17:32:59 +0000
-Subject: [PATCH 644/660] net: sfp: derive interface mode from ethtool link
- modes
-
-We don't need the EEPROM ID to derive the phy interface mode as we can
-derive it merely from the ethtool link modes.  Remove the EEPROM ID
-argument to sfp_select_interface().
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/marvell10g.c |  2 +-
- drivers/net/phy/phylink.c    |  2 +-
- drivers/net/phy/sfp-bus.c    | 11 ++++-------
- include/linux/sfp.h          |  2 --
- 4 files changed, 6 insertions(+), 11 deletions(-)
-
---- a/drivers/net/phy/marvell10g.c
-+++ b/drivers/net/phy/marvell10g.c
-@@ -214,7 +214,7 @@ static int mv3310_sfp_insert(void *upstr
- 	phy_interface_t iface;
- 
- 	sfp_parse_support(phydev->sfp_bus, id, support);
--	iface = sfp_select_interface(phydev->sfp_bus, id, support);
-+	iface = sfp_select_interface(phydev->sfp_bus, support);
- 
- 	if (iface != PHY_INTERFACE_MODE_10GKR) {
- 		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1718,7 +1718,7 @@ static int phylink_sfp_module_insert(voi
- 
- 	linkmode_copy(support1, support);
- 
--	iface = sfp_select_interface(pl->sfp_bus, id, config.advertising);
-+	iface = sfp_select_interface(pl->sfp_bus, config.advertising);
- 	if (iface == PHY_INTERFACE_MODE_NA) {
- 		phylink_err(pl,
- 			    "selection of interface failed, advertisement %*pb\n",
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -320,16 +320,12 @@ EXPORT_SYMBOL_GPL(sfp_parse_support);
- /**
-  * sfp_select_interface() - Select appropriate phy_interface_t mode
-  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
-- * @id: a pointer to the module's &struct sfp_eeprom_id
-  * @link_modes: ethtool link modes mask
-  *
-- * Derive the phy_interface_t mode for the information found in the
-- * module's identifying EEPROM and the link modes mask. There is no
-- * standard or defined way to derive this information, so we decide
-- * based upon the link mode mask.
-+ * Derive the phy_interface_t mode for the SFP module from the link
-+ * modes mask.
-  */
- phy_interface_t sfp_select_interface(struct sfp_bus *bus,
--				     const struct sfp_eeprom_id *id,
- 				     unsigned long *link_modes)
- {
- 	if (phylink_test(link_modes, 10000baseCR_Full) ||
-@@ -342,7 +338,8 @@ phy_interface_t sfp_select_interface(str
- 	if (phylink_test(link_modes, 2500baseX_Full))
- 		return PHY_INTERFACE_MODE_2500BASEX;
- 
--	if (id->base.e1000_base_t)
-+	if (phylink_test(link_modes, 1000baseT_Half) ||
-+	    phylink_test(link_modes, 1000baseT_Full))
- 		return PHY_INTERFACE_MODE_SGMII;
- 
- 	if (phylink_test(link_modes, 1000baseX_Full))
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -504,7 +504,6 @@ int sfp_parse_port(struct sfp_bus *bus,
- void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
- 		       unsigned long *support);
- phy_interface_t sfp_select_interface(struct sfp_bus *bus,
--				     const struct sfp_eeprom_id *id,
- 				     unsigned long *link_modes);
- 
- int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo);
-@@ -532,7 +531,6 @@ static inline void sfp_parse_support(str
- }
- 
- static inline phy_interface_t sfp_select_interface(struct sfp_bus *bus,
--						   const struct sfp_eeprom_id *id,
- 						   unsigned long *link_modes)
- {
- 	return PHY_INTERFACE_MODE_NA;
diff --git a/target/linux/generic/pending-5.4/742-net-sfp-add-more-extended-compliance-codes.patch b/target/linux/generic/pending-5.4/742-net-sfp-add-more-extended-compliance-codes.patch
deleted file mode 100644
index 868e14520b..0000000000
--- a/target/linux/generic/pending-5.4/742-net-sfp-add-more-extended-compliance-codes.patch
+++ /dev/null
@@ -1,251 +0,0 @@
-From c66a4e76c8554c84e64b9315314576ac403c6641 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 26 Sep 2019 15:14:18 +0100
-Subject: [PATCH 645/660] net: sfp: add more extended compliance codes
-
-SFF-8024 is used to define various constants re-used in several SFF
-SFP-related specifications.  Split these constants from the enum, and
-rename them to indicate that they're defined by SFF-8024.
-
-Add and use updated SFF-8024 extended compliance code definitions for
-10GBASE-T, 5GBASE-T and 2.5GBASE-T modules.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp-bus.c | 60 ++++++++++++++++------------
- drivers/net/phy/sfp.c     |  4 +-
- include/linux/sfp.h       | 82 ++++++++++++++++++++++++++-------------
- 3 files changed, 93 insertions(+), 53 deletions(-)
-
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -124,35 +124,35 @@ int sfp_parse_port(struct sfp_bus *bus,
- 
- 	/* port is the physical connector, set this from the connector field. */
- 	switch (id->base.connector) {
--	case SFP_CONNECTOR_SC:
--	case SFP_CONNECTOR_FIBERJACK:
--	case SFP_CONNECTOR_LC:
--	case SFP_CONNECTOR_MT_RJ:
--	case SFP_CONNECTOR_MU:
--	case SFP_CONNECTOR_OPTICAL_PIGTAIL:
-+	case SFF8024_CONNECTOR_SC:
-+	case SFF8024_CONNECTOR_FIBERJACK:
-+	case SFF8024_CONNECTOR_LC:
-+	case SFF8024_CONNECTOR_MT_RJ:
-+	case SFF8024_CONNECTOR_MU:
-+	case SFF8024_CONNECTOR_OPTICAL_PIGTAIL:
-+	case SFF8024_CONNECTOR_MPO_1X12:
-+	case SFF8024_CONNECTOR_MPO_2X16:
- 		port = PORT_FIBRE;
- 		break;
- 
--	case SFP_CONNECTOR_RJ45:
-+	case SFF8024_CONNECTOR_RJ45:
- 		port = PORT_TP;
- 		break;
- 
--	case SFP_CONNECTOR_COPPER_PIGTAIL:
-+	case SFF8024_CONNECTOR_COPPER_PIGTAIL:
- 		port = PORT_DA;
- 		break;
- 
--	case SFP_CONNECTOR_UNSPEC:
-+	case SFF8024_CONNECTOR_UNSPEC:
- 		if (id->base.e1000_base_t) {
- 			port = PORT_TP;
- 			break;
- 		}
- 		/* fallthrough */
--	case SFP_CONNECTOR_SG: /* guess */
--	case SFP_CONNECTOR_MPO_1X12:
--	case SFP_CONNECTOR_MPO_2X16:
--	case SFP_CONNECTOR_HSSDC_II:
--	case SFP_CONNECTOR_NOSEPARATE:
--	case SFP_CONNECTOR_MXC_2X16:
-+	case SFF8024_CONNECTOR_SG: /* guess */
-+	case SFF8024_CONNECTOR_HSSDC_II:
-+	case SFF8024_CONNECTOR_NOSEPARATE:
-+	case SFF8024_CONNECTOR_MXC_2X16:
- 		port = PORT_OTHER;
- 		break;
- 	default:
-@@ -261,22 +261,33 @@ void sfp_parse_support(struct sfp_bus *b
- 	}
- 
- 	switch (id->base.extended_cc) {
--	case 0x00: /* Unspecified */
-+	case SFF8024_ECC_UNSPEC:
- 		break;
--	case 0x02: /* 100Gbase-SR4 or 25Gbase-SR */
-+	case SFF8024_ECC_100GBASE_SR4_25GBASE_SR:
- 		phylink_set(modes, 100000baseSR4_Full);
- 		phylink_set(modes, 25000baseSR_Full);
- 		break;
--	case 0x03: /* 100Gbase-LR4 or 25Gbase-LR */
--	case 0x04: /* 100Gbase-ER4 or 25Gbase-ER */
-+	case SFF8024_ECC_100GBASE_LR4_25GBASE_LR:
-+	case SFF8024_ECC_100GBASE_ER4_25GBASE_ER:
- 		phylink_set(modes, 100000baseLR4_ER4_Full);
- 		break;
--	case 0x0b: /* 100Gbase-CR4 or 25Gbase-CR CA-L */
--	case 0x0c: /* 25Gbase-CR CA-S */
--	case 0x0d: /* 25Gbase-CR CA-N */
-+	case SFF8024_ECC_100GBASE_CR4:
- 		phylink_set(modes, 100000baseCR4_Full);
-+		/* fallthrough */
-+	case SFF8024_ECC_25GBASE_CR_S:
-+	case SFF8024_ECC_25GBASE_CR_N:
- 		phylink_set(modes, 25000baseCR_Full);
- 		break;
-+	case SFF8024_ECC_10GBASE_T_SFI:
-+	case SFF8024_ECC_10GBASE_T_SR:
-+		phylink_set(modes, 10000baseT_Full);
-+		break;
-+	case SFF8024_ECC_5GBASE_T:
-+		phylink_set(modes, 5000baseT_Full);
-+		break;
-+	case SFF8024_ECC_2_5GBASE_T:
-+		phylink_set(modes, 2500baseT_Full);
-+		break;
- 	default:
- 		dev_warn(bus->sfp_dev,
- 			 "Unknown/unsupported extended compliance code: 0x%02x\n",
-@@ -301,7 +312,7 @@ void sfp_parse_support(struct sfp_bus *b
- 	 */
- 	if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS)) {
- 		/* If the encoding and bit rate allows 1000baseX */
--		if (id->base.encoding == SFP_ENCODING_8B10B && br_nom &&
-+		if (id->base.encoding == SFF8024_ENCODING_8B10B && br_nom &&
- 		    br_min <= 1300 && br_max >= 1200)
- 			phylink_set(modes, 1000baseX_Full);
- 	}
-@@ -332,7 +343,8 @@ phy_interface_t sfp_select_interface(str
- 	    phylink_test(link_modes, 10000baseSR_Full) ||
- 	    phylink_test(link_modes, 10000baseLR_Full) ||
- 	    phylink_test(link_modes, 10000baseLRM_Full) ||
--	    phylink_test(link_modes, 10000baseER_Full))
-+	    phylink_test(link_modes, 10000baseER_Full) ||
-+	    phylink_test(link_modes, 10000baseT_Full))
- 		return PHY_INTERFACE_MODE_10GKR;
- 
- 	if (phylink_test(link_modes, 2500baseX_Full))
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -243,7 +243,7 @@ struct sfp {
- 
- static bool sff_module_supported(const struct sfp_eeprom_id *id)
- {
--	return id->base.phys_id == SFP_PHYS_ID_SFF &&
-+	return id->base.phys_id == SFF8024_ID_SFF_8472 &&
- 	       id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP;
- }
- 
-@@ -254,7 +254,7 @@ static const struct sff_data sff_data =
- 
- static bool sfp_module_supported(const struct sfp_eeprom_id *id)
- {
--	return id->base.phys_id == SFP_PHYS_ID_SFP &&
-+	return id->base.phys_id == SFF8024_ID_SFP &&
- 	       id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP;
- }
- 
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -275,6 +275,61 @@ struct sfp_diag {
- 	__be16 cal_v_offset;
- } __packed;
- 
-+/* SFF8024 defined constants */
-+enum {
-+	SFF8024_ID_UNK			= 0x00,
-+	SFF8024_ID_SFF_8472		= 0x02,
-+	SFF8024_ID_SFP			= 0x03,
-+	SFF8024_ID_DWDM_SFP		= 0x0b,
-+	SFF8024_ID_QSFP_8438		= 0x0c,
-+	SFF8024_ID_QSFP_8436_8636	= 0x0d,
-+	SFF8024_ID_QSFP28_8636		= 0x11,
-+
-+	SFF8024_ENCODING_UNSPEC		= 0x00,
-+	SFF8024_ENCODING_8B10B		= 0x01,
-+	SFF8024_ENCODING_4B5B		= 0x02,
-+	SFF8024_ENCODING_NRZ		= 0x03,
-+	SFF8024_ENCODING_8472_MANCHESTER= 0x04,
-+	SFF8024_ENCODING_8472_SONET	= 0x05,
-+	SFF8024_ENCODING_8472_64B66B	= 0x06,
-+	SFF8024_ENCODING_8436_MANCHESTER= 0x06,
-+	SFF8024_ENCODING_8436_SONET	= 0x04,
-+	SFF8024_ENCODING_8436_64B66B	= 0x05,
-+	SFF8024_ENCODING_256B257B	= 0x07,
-+	SFF8024_ENCODING_PAM4		= 0x08,
-+
-+	SFF8024_CONNECTOR_UNSPEC	= 0x00,
-+	/* codes 01-05 not supportable on SFP, but some modules have single SC */
-+	SFF8024_CONNECTOR_SC		= 0x01,
-+	SFF8024_CONNECTOR_FIBERJACK	= 0x06,
-+	SFF8024_CONNECTOR_LC		= 0x07,
-+	SFF8024_CONNECTOR_MT_RJ		= 0x08,
-+	SFF8024_CONNECTOR_MU		= 0x09,
-+	SFF8024_CONNECTOR_SG		= 0x0a,
-+	SFF8024_CONNECTOR_OPTICAL_PIGTAIL= 0x0b,
-+	SFF8024_CONNECTOR_MPO_1X12	= 0x0c,
-+	SFF8024_CONNECTOR_MPO_2X16	= 0x0d,
-+	SFF8024_CONNECTOR_HSSDC_II	= 0x20,
-+	SFF8024_CONNECTOR_COPPER_PIGTAIL= 0x21,
-+	SFF8024_CONNECTOR_RJ45		= 0x22,
-+	SFF8024_CONNECTOR_NOSEPARATE	= 0x23,
-+	SFF8024_CONNECTOR_MXC_2X16	= 0x24,
-+
-+	SFF8024_ECC_UNSPEC		= 0x00,
-+	SFF8024_ECC_100G_25GAUI_C2M_AOC	= 0x01,
-+	SFF8024_ECC_100GBASE_SR4_25GBASE_SR = 0x02,
-+	SFF8024_ECC_100GBASE_LR4_25GBASE_LR = 0x03,
-+	SFF8024_ECC_100GBASE_ER4_25GBASE_ER = 0x04,
-+	SFF8024_ECC_100GBASE_SR10	= 0x05,
-+	SFF8024_ECC_100GBASE_CR4	= 0x0b,
-+	SFF8024_ECC_25GBASE_CR_S	= 0x0c,
-+	SFF8024_ECC_25GBASE_CR_N	= 0x0d,
-+	SFF8024_ECC_10GBASE_T_SFI	= 0x16,
-+	SFF8024_ECC_10GBASE_T_SR	= 0x1c,
-+	SFF8024_ECC_5GBASE_T		= 0x1d,
-+	SFF8024_ECC_2_5GBASE_T		= 0x1e,
-+};
-+
- /* SFP EEPROM registers */
- enum {
- 	SFP_PHYS_ID			= 0x00,
-@@ -309,34 +364,7 @@ enum {
- 	SFP_SFF8472_COMPLIANCE		= 0x5e,
- 	SFP_CC_EXT			= 0x5f,
- 
--	SFP_PHYS_ID_SFF			= 0x02,
--	SFP_PHYS_ID_SFP			= 0x03,
- 	SFP_PHYS_EXT_ID_SFP		= 0x04,
--	SFP_CONNECTOR_UNSPEC		= 0x00,
--	/* codes 01-05 not supportable on SFP, but some modules have single SC */
--	SFP_CONNECTOR_SC		= 0x01,
--	SFP_CONNECTOR_FIBERJACK		= 0x06,
--	SFP_CONNECTOR_LC		= 0x07,
--	SFP_CONNECTOR_MT_RJ		= 0x08,
--	SFP_CONNECTOR_MU		= 0x09,
--	SFP_CONNECTOR_SG		= 0x0a,
--	SFP_CONNECTOR_OPTICAL_PIGTAIL	= 0x0b,
--	SFP_CONNECTOR_MPO_1X12		= 0x0c,
--	SFP_CONNECTOR_MPO_2X16		= 0x0d,
--	SFP_CONNECTOR_HSSDC_II		= 0x20,
--	SFP_CONNECTOR_COPPER_PIGTAIL	= 0x21,
--	SFP_CONNECTOR_RJ45		= 0x22,
--	SFP_CONNECTOR_NOSEPARATE	= 0x23,
--	SFP_CONNECTOR_MXC_2X16		= 0x24,
--	SFP_ENCODING_UNSPEC		= 0x00,
--	SFP_ENCODING_8B10B		= 0x01,
--	SFP_ENCODING_4B5B		= 0x02,
--	SFP_ENCODING_NRZ		= 0x03,
--	SFP_ENCODING_8472_MANCHESTER	= 0x04,
--	SFP_ENCODING_8472_SONET		= 0x05,
--	SFP_ENCODING_8472_64B66B	= 0x06,
--	SFP_ENCODING_256B257B		= 0x07,
--	SFP_ENCODING_PAM4		= 0x08,
- 	SFP_OPTIONS_HIGH_POWER_LEVEL	= BIT(13),
- 	SFP_OPTIONS_PAGING_A2		= BIT(12),
- 	SFP_OPTIONS_RETIMER		= BIT(11),
diff --git a/target/linux/generic/pending-5.4/743-net-sfp-add-module-start-stop-upstream-notifications.patch b/target/linux/generic/pending-5.4/743-net-sfp-add-module-start-stop-upstream-notifications.patch
deleted file mode 100644
index 3dc8f60020..0000000000
--- a/target/linux/generic/pending-5.4/743-net-sfp-add-module-start-stop-upstream-notifications.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From f9a5a54b59cb904b37bf7409a43635ab195d0214 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 19 Nov 2019 10:13:25 +0000
-Subject: [PATCH 646/660] net: sfp: add module start/stop upstream
- notifications
-
-When dealing with some copper modules, we can't positively know the
-module capabilities are until we have probed the PHY. Without the full
-capabilities, we may end up failing a module that we could otherwise
-drive with a restricted set of capabilities.
-
-An example of this would be a module with a NBASE-T PHY plugged into
-a host that supports phy interface modes 2500BASE-X and SGMII. The
-PHY supports 10GBASE-R, 5000BASE-X, 2500BASE-X, SGMII interface modes,
-which means a subset of the capabilities are compatible with the host.
-
-However, reading the module EEPROM leads us to believe that the module
-only supports ethtool link mode 10GBASE-T, which is incompatible with
-the host - and thus results in the module being rejected.
-
-This patch adds an extra notification which are triggered after the
-SFP module's PHY probe, and a corresponding notification just before
-the PHY is removed.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp-bus.c | 21 +++++++++++++++++++++
- drivers/net/phy/sfp.c     |  8 ++++++++
- drivers/net/phy/sfp.h     |  2 ++
- include/linux/sfp.h       |  4 ++++
- 4 files changed, 35 insertions(+)
-
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -712,6 +712,27 @@ void sfp_module_remove(struct sfp_bus *b
- }
- EXPORT_SYMBOL_GPL(sfp_module_remove);
- 
-+int sfp_module_start(struct sfp_bus *bus)
-+{
-+	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
-+	int ret = 0;
-+
-+	if (ops && ops->module_start)
-+		ret = ops->module_start(bus->upstream);
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL_GPL(sfp_module_start);
-+
-+void sfp_module_stop(struct sfp_bus *bus)
-+{
-+	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
-+
-+	if (ops && ops->module_stop)
-+		ops->module_stop(bus->upstream);
-+}
-+EXPORT_SYMBOL_GPL(sfp_module_stop);
-+
- static void sfp_socket_clear(struct sfp_bus *bus)
- {
- 	bus->sfp_dev = NULL;
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -59,6 +59,7 @@ enum {
- 	SFP_DEV_UP,
- 
- 	SFP_S_DOWN = 0,
-+	SFP_S_FAIL,
- 	SFP_S_WAIT,
- 	SFP_S_INIT,
- 	SFP_S_INIT_TX_FAULT,
-@@ -122,6 +123,7 @@ static const char *event_to_str(unsigned
- 
- static const char * const sm_state_strings[] = {
- 	[SFP_S_DOWN] = "down",
-+	[SFP_S_FAIL] = "fail",
- 	[SFP_S_WAIT] = "wait",
- 	[SFP_S_INIT] = "init",
- 	[SFP_S_INIT_TX_FAULT] = "init_tx_fault",
-@@ -1918,6 +1920,8 @@ static void sfp_sm_main(struct sfp *sfp,
- 		if (sfp->sm_state == SFP_S_LINK_UP &&
- 		    sfp->sm_dev_state == SFP_DEV_UP)
- 			sfp_sm_link_down(sfp);
-+		if (sfp->sm_state > SFP_S_INIT)
-+			sfp_module_stop(sfp->sfp_bus);
- 		if (sfp->mod_phy)
- 			sfp_sm_phy_detach(sfp);
- 		sfp_module_tx_disable(sfp);
-@@ -1985,6 +1989,10 @@ static void sfp_sm_main(struct sfp *sfp,
- 			 * clear.  Probe for the PHY and check the LOS state.
- 			 */
- 			sfp_sm_probe_for_phy(sfp);
-+			if (sfp_module_start(sfp->sfp_bus)) {
-+				sfp_sm_next(sfp, SFP_S_FAIL, 0);
-+				break;
-+			}
- 			sfp_sm_link_check_los(sfp);
- 
- 			/* Reset the fault retry count */
---- a/drivers/net/phy/sfp.h
-+++ b/drivers/net/phy/sfp.h
-@@ -22,6 +22,8 @@ void sfp_link_up(struct sfp_bus *bus);
- void sfp_link_down(struct sfp_bus *bus);
- int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
- void sfp_module_remove(struct sfp_bus *bus);
-+int sfp_module_start(struct sfp_bus *bus);
-+void sfp_module_stop(struct sfp_bus *bus);
- int sfp_link_configure(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
- struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp,
- 				    const struct sfp_socket_ops *ops);
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -507,6 +507,8 @@ struct sfp_bus;
-  * @module_insert: called after a module has been detected to determine
-  *   whether the module is supported for the upstream device.
-  * @module_remove: called after the module has been removed.
-+ * @module_start: called after the PHY probe step
-+ * @module_stop: called before the PHY is removed
-  * @link_down: called when the link is non-operational for whatever
-  *   reason.
-  * @link_up: called when the link is operational.
-@@ -520,6 +522,8 @@ struct sfp_upstream_ops {
- 	void (*detach)(void *priv, struct sfp_bus *bus);
- 	int (*module_insert)(void *priv, const struct sfp_eeprom_id *id);
- 	void (*module_remove)(void *priv);
-+	int (*module_start)(void *priv);
-+	void (*module_stop)(void *priv);
- 	void (*link_down)(void *priv);
- 	void (*link_up)(void *priv);
- 	int (*connect_phy)(void *priv, struct phy_device *);
diff --git a/target/linux/generic/pending-5.4/744-net-sfp-move-phy_start-phy_stop-to-phylink.patch b/target/linux/generic/pending-5.4/744-net-sfp-move-phy_start-phy_stop-to-phylink.patch
deleted file mode 100644
index 98987d5a49..0000000000
--- a/target/linux/generic/pending-5.4/744-net-sfp-move-phy_start-phy_stop-to-phylink.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From e2dc261b872a92a055eb2e86ac136baf9b20f2f2 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 21 Nov 2019 17:21:33 +0000
-Subject: [PATCH 647/660] net: sfp: move phy_start()/phy_stop() to phylink
-
-Move phy_start() and phy_stop() into the module_start and module_stop
-notifications in phylink, rather than having them in the SFP code.
-This gives phylink responsibility for controlling the PHY, rather
-than having SFP start and stop the PHY state machine.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 22 ++++++++++++++++++++++
- drivers/net/phy/sfp.c     |  2 --
- 2 files changed, 22 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1772,6 +1772,26 @@ static int phylink_sfp_module_insert(voi
- 	return ret;
- }
- 
-+static int phylink_sfp_module_start(void *upstream)
-+{
-+	struct phylink *pl = upstream;
-+
-+	/* If this SFP module has a PHY, start the PHY now. */
-+	if (pl->phydev)
-+		phy_start(pl->phydev);
-+		
-+	return 0;
-+}
-+
-+static void phylink_sfp_module_stop(void *upstream)
-+{
-+	struct phylink *pl = upstream;
-+
-+	/* If this SFP module has a PHY, stop it. */
-+	if (pl->phydev)
-+		phy_stop(pl->phydev);
-+}
-+
- static void phylink_sfp_link_down(void *upstream)
- {
- 	struct phylink *pl = upstream;
-@@ -1807,6 +1827,8 @@ static const struct sfp_upstream_ops sfp
- 	.attach = phylink_sfp_attach,
- 	.detach = phylink_sfp_detach,
- 	.module_insert = phylink_sfp_module_insert,
-+	.module_start = phylink_sfp_module_start,
-+	.module_stop = phylink_sfp_module_stop,
- 	.link_up = phylink_sfp_link_up,
- 	.link_down = phylink_sfp_link_down,
- 	.connect_phy = phylink_sfp_connect_phy,
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1412,7 +1412,6 @@ static void sfp_sm_mod_next(struct sfp *
- 
- static void sfp_sm_phy_detach(struct sfp *sfp)
- {
--	phy_stop(sfp->mod_phy);
- 	sfp_remove_phy(sfp->sfp_bus);
- 	phy_device_remove(sfp->mod_phy);
- 	phy_device_free(sfp->mod_phy);
-@@ -1443,7 +1442,6 @@ static void sfp_sm_probe_phy(struct sfp
- 	}
- 
- 	sfp->mod_phy = phy;
--	phy_start(phy);
- }
- 
- static void sfp_sm_link_up(struct sfp *sfp)
diff --git a/target/linux/generic/pending-5.4/745-net-mdio-i2c-add-support-for-Clause-45-accesses.patch b/target/linux/generic/pending-5.4/745-net-mdio-i2c-add-support-for-Clause-45-accesses.patch
deleted file mode 100644
index 761a94b3d4..0000000000
--- a/target/linux/generic/pending-5.4/745-net-mdio-i2c-add-support-for-Clause-45-accesses.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From c9de73988a35c6c85810a992954ac568cca503e5 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Wed, 2 Oct 2019 10:31:10 +0100
-Subject: [PATCH 648/660] net: mdio-i2c: add support for Clause 45 accesses
-
-Some SFP+ modules have PHYs on them just like SFP modules do, except
-they are Clause 45 PHYs.  The I2C protocol used to access them is
-modified slightly in order to send the device address and 16-bit
-register index.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/mdio-i2c.c | 28 ++++++++++++++++++++--------
- 1 file changed, 20 insertions(+), 8 deletions(-)
-
---- a/drivers/net/phy/mdio-i2c.c
-+++ b/drivers/net/phy/mdio-i2c.c
-@@ -33,17 +33,24 @@ static int i2c_mii_read(struct mii_bus *
- {
- 	struct i2c_adapter *i2c = bus->priv;
- 	struct i2c_msg msgs[2];
--	u8 data[2], dev_addr = reg;
-+	u8 addr[3], data[2], *p;
- 	int bus_addr, ret;
- 
- 	if (!i2c_mii_valid_phy_id(phy_id))
- 		return 0xffff;
- 
-+	p = addr;
-+	if (reg & MII_ADDR_C45) {
-+		*p++ = 0x20 | ((reg >> 16) & 31);
-+		*p++ = reg >> 8;
-+	}
-+	*p++ = reg;
-+
- 	bus_addr = i2c_mii_phy_addr(phy_id);
- 	msgs[0].addr = bus_addr;
- 	msgs[0].flags = 0;
--	msgs[0].len = 1;
--	msgs[0].buf = &dev_addr;
-+	msgs[0].len = p - addr;
-+	msgs[0].buf = addr;
- 	msgs[1].addr = bus_addr;
- 	msgs[1].flags = I2C_M_RD;
- 	msgs[1].len = sizeof(data);
-@@ -61,18 +68,23 @@ static int i2c_mii_write(struct mii_bus
- 	struct i2c_adapter *i2c = bus->priv;
- 	struct i2c_msg msg;
- 	int ret;
--	u8 data[3];
-+	u8 data[5], *p;
- 
- 	if (!i2c_mii_valid_phy_id(phy_id))
- 		return 0;
- 
--	data[0] = reg;
--	data[1] = val >> 8;
--	data[2] = val;
-+	p = data;
-+	if (reg & MII_ADDR_C45) {
-+		*p++ = (reg >> 16) & 31;
-+		*p++ = reg >> 8;
-+	}
-+	*p++ = reg;
-+	*p++ = val >> 8;
-+	*p++ = val;
- 
- 	msg.addr = i2c_mii_phy_addr(phy_id);
- 	msg.flags = 0;
--	msg.len = 3;
-+	msg.len = p - data;
- 	msg.buf = data;
- 
- 	ret = i2c_transfer(i2c, &msg, 1);
diff --git a/target/linux/generic/pending-5.4/746-net-phylink-re-split-__phylink_connect_phy.patch b/target/linux/generic/pending-5.4/746-net-phylink-re-split-__phylink_connect_phy.patch
deleted file mode 100644
index d547a18d6e..0000000000
--- a/target/linux/generic/pending-5.4/746-net-phylink-re-split-__phylink_connect_phy.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 0db7fba746b5608c30d4e2ba1c99a2a309e2d288 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 8 Nov 2019 15:22:48 +0000
-Subject: [PATCH 649/660] net: phylink: re-split __phylink_connect_phy()
-
-In order to support Clause 45 PHYs on SFP+ modules, which have an
-indeterminant phy interface mode, we need to be able to call
-phylink_bringup_phy() with a different interface mode to that used when
-binding the PHY. Reduce __phylink_connect_phy() to an attach operation,
-and move the call to phylink_bringup_phy() to its call sites.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 39 ++++++++++++++++++++++++---------------
- 1 file changed, 24 insertions(+), 15 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -765,11 +765,9 @@ static int phylink_bringup_phy(struct ph
- 	return 0;
- }
- 
--static int __phylink_connect_phy(struct phylink *pl, struct phy_device *phy,
--		phy_interface_t interface)
-+static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
-+			      phy_interface_t interface)
- {
--	int ret;
--
- 	if (WARN_ON(pl->link_an_mode == MLO_AN_FIXED ||
- 		    (pl->link_an_mode == MLO_AN_INBAND &&
- 		     phy_interface_mode_is_8023z(interface))))
-@@ -778,15 +776,7 @@ static int __phylink_connect_phy(struct
- 	if (pl->phydev)
- 		return -EBUSY;
- 
--	ret = phy_attach_direct(pl->netdev, phy, 0, interface);
--	if (ret)
--		return ret;
--
--	ret = phylink_bringup_phy(pl, phy);
--	if (ret)
--		phy_detach(phy);
--
--	return ret;
-+	return phy_attach_direct(pl->netdev, phy, 0, interface);
- }
- 
- /**
-@@ -806,13 +796,23 @@ static int __phylink_connect_phy(struct
-  */
- int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
- {
-+	int ret;
-+
- 	/* Use PHY device/driver interface */
- 	if (pl->link_interface == PHY_INTERFACE_MODE_NA) {
- 		pl->link_interface = phy->interface;
- 		pl->link_config.interface = pl->link_interface;
- 	}
- 
--	return __phylink_connect_phy(pl, phy, pl->link_interface);
-+	ret = phylink_attach_phy(pl, phy, pl->link_interface);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = phylink_bringup_phy(pl, phy);
-+	if (ret)
-+		phy_detach(phy);
-+
-+	return ret;
- }
- EXPORT_SYMBOL_GPL(phylink_connect_phy);
- 
-@@ -1814,8 +1814,17 @@ static void phylink_sfp_link_up(void *up
- static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
- {
- 	struct phylink *pl = upstream;
-+	int ret;
- 
--	return __phylink_connect_phy(upstream, phy, pl->link_config.interface);
-+	ret = phylink_attach_phy(pl, phy, pl->link_config.interface);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = phylink_bringup_phy(pl, phy);
-+	if (ret)
-+		phy_detach(phy);
-+
-+	return ret;
- }
- 
- static void phylink_sfp_disconnect_phy(void *upstream)
diff --git a/target/linux/generic/pending-5.4/747-net-phylink-support-Clause-45-PHYs-on-SFP-modules.patch b/target/linux/generic/pending-5.4/747-net-phylink-support-Clause-45-PHYs-on-SFP-modules.patch
deleted file mode 100644
index 673de1005a..0000000000
--- a/target/linux/generic/pending-5.4/747-net-phylink-support-Clause-45-PHYs-on-SFP-modules.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From caf32f96f13df7d3ae6cb8bf8001c88ae22025ca Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 8 Nov 2019 15:28:22 +0000
-Subject: [PATCH 650/660] net: phylink: support Clause 45 PHYs on SFP+ modules
-
-Some SFP+ modules have Clause 45 PHYs embedded on them, which need a
-little more handling in order to ensure that they are correctly setup,
-as they switch the PHY link mode according to the negotiated speed.
-
-With Clause 22 PHYs, we assumed that they would operate in SGMII mode,
-but this assumption is now false.  Adapt phylink to support Clause 45
-PHYs on SFP+ modules.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 21 ++++++++++++++++-----
- 1 file changed, 16 insertions(+), 5 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -712,7 +712,8 @@ static void phylink_phy_change(struct ph
- 		    phy_duplex_to_str(phydev->duplex));
- }
- 
--static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
-+static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
-+			       phy_interface_t interface)
- {
- 	struct phylink_link_state config;
- 	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
-@@ -730,7 +731,7 @@ static int phylink_bringup_phy(struct ph
- 	memset(&config, 0, sizeof(config));
- 	linkmode_copy(supported, phy->supported);
- 	linkmode_copy(config.advertising, phy->advertising);
--	config.interface = pl->link_config.interface;
-+	config.interface = interface;
- 
- 	ret = phylink_validate(pl, supported, &config);
- 	if (ret)
-@@ -746,6 +747,7 @@ static int phylink_bringup_phy(struct ph
- 	mutex_lock(&phy->lock);
- 	mutex_lock(&pl->state_mutex);
- 	pl->phydev = phy;
-+	pl->phy_state.interface = interface;
- 	linkmode_copy(pl->supported, supported);
- 	linkmode_copy(pl->link_config.advertising, config.advertising);
- 
-@@ -808,7 +810,7 @@ int phylink_connect_phy(struct phylink *
- 	if (ret < 0)
- 		return ret;
- 
--	ret = phylink_bringup_phy(pl, phy);
-+	ret = phylink_bringup_phy(pl, phy, pl->link_config.interface);
- 	if (ret)
- 		phy_detach(phy);
- 
-@@ -861,7 +863,7 @@ int phylink_of_phy_connect(struct phylin
- 	if (!phy_dev)
- 		return -ENODEV;
- 
--	ret = phylink_bringup_phy(pl, phy_dev);
-+	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
- 	if (ret)
- 		phy_detach(phy_dev);
- 
-@@ -1814,13 +1816,22 @@ static void phylink_sfp_link_up(void *up
- static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
- {
- 	struct phylink *pl = upstream;
-+	phy_interface_t interface = pl->link_config.interface;
- 	int ret;
- 
- 	ret = phylink_attach_phy(pl, phy, pl->link_config.interface);
- 	if (ret < 0)
- 		return ret;
- 
--	ret = phylink_bringup_phy(pl, phy);
-+	/* Clause 45 PHYs switch their Serdes lane between several different
-+	 * modes, normally 10GBASE-R, SGMII. Some use 2500BASE-X for 2.5G
-+	 * speeds.  We really need to know which interface modes the PHY and
-+	 * MAC supports to properly work out which linkmodes can be supported.
-+	 */
-+	if (phy->is_c45)
-+		interface = PHY_INTERFACE_MODE_NA;
-+
-+	ret = phylink_bringup_phy(pl, phy, interface);
- 	if (ret)
- 		phy_detach(phy);
- 
diff --git a/target/linux/generic/pending-5.4/748-net-phylink-split-link_an_mode-configured-and-curren.patch b/target/linux/generic/pending-5.4/748-net-phylink-split-link_an_mode-configured-and-curren.patch
deleted file mode 100644
index eaf21dbc87..0000000000
--- a/target/linux/generic/pending-5.4/748-net-phylink-split-link_an_mode-configured-and-curren.patch
+++ /dev/null
@@ -1,257 +0,0 @@
-From d1339d6956f0255b6ce2412328a98945be8cc3ca Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 16 Nov 2019 11:30:18 +0000
-Subject: [PATCH 651/660] net: phylink: split link_an_mode configured and
- current settings
-
-Split link_an_mode between the configured setting and the current
-operating setting.  This is an important distinction to make when we
-need to configure PHY mode for a plugged SFP+ module that does not
-use in-band signalling.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 59 ++++++++++++++++++++-------------------
- 1 file changed, 31 insertions(+), 28 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -48,7 +48,8 @@ struct phylink {
- 	unsigned long phylink_disable_state; /* bitmask of disables */
- 	struct phy_device *phydev;
- 	phy_interface_t link_interface;	/* PHY_INTERFACE_xxx */
--	u8 link_an_mode;		/* MLO_AN_xxx */
-+	u8 cfg_link_an_mode;		/* MLO_AN_xxx */
-+	u8 cur_link_an_mode;
- 	u8 link_port;			/* The current non-phy ethtool port */
- 	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
- 
-@@ -258,12 +259,12 @@ static int phylink_parse_mode(struct phy
- 
- 	dn = fwnode_get_named_child_node(fwnode, "fixed-link");
- 	if (dn || fwnode_property_present(fwnode, "fixed-link"))
--		pl->link_an_mode = MLO_AN_FIXED;
-+		pl->cfg_link_an_mode = MLO_AN_FIXED;
- 	fwnode_handle_put(dn);
- 
- 	if (fwnode_property_read_string(fwnode, "managed", &managed) == 0 &&
- 	    strcmp(managed, "in-band-status") == 0) {
--		if (pl->link_an_mode == MLO_AN_FIXED) {
-+		if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
- 			phylink_err(pl,
- 				    "can't use both fixed-link and in-band-status\n");
- 			return -EINVAL;
-@@ -275,7 +276,7 @@ static int phylink_parse_mode(struct phy
- 		phylink_set(pl->supported, Asym_Pause);
- 		phylink_set(pl->supported, Pause);
- 		pl->link_config.an_enabled = true;
--		pl->link_an_mode = MLO_AN_INBAND;
-+		pl->cfg_link_an_mode = MLO_AN_INBAND;
- 
- 		switch (pl->link_config.interface) {
- 		case PHY_INTERFACE_MODE_SGMII:
-@@ -335,14 +336,14 @@ static void phylink_mac_config(struct ph
- {
- 	phylink_dbg(pl,
- 		    "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
--		    __func__, phylink_an_mode_str(pl->link_an_mode),
-+		    __func__, phylink_an_mode_str(pl->cur_link_an_mode),
- 		    phy_modes(state->interface),
- 		    phy_speed_to_str(state->speed),
- 		    phy_duplex_to_str(state->duplex),
- 		    __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
- 		    state->pause, state->link, state->an_enabled);
- 
--	pl->ops->mac_config(pl->config, pl->link_an_mode, state);
-+	pl->ops->mac_config(pl->config, pl->cur_link_an_mode, state);
- }
- 
- static void phylink_mac_config_up(struct phylink *pl,
-@@ -443,7 +444,7 @@ static void phylink_mac_link_up(struct p
- 	struct net_device *ndev = pl->netdev;
- 
- 	pl->cur_interface = link_state.interface;
--	pl->ops->mac_link_up(pl->config, pl->link_an_mode,
-+	pl->ops->mac_link_up(pl->config, pl->cur_link_an_mode,
- 			     pl->cur_interface, pl->phydev);
- 
- 	if (ndev)
-@@ -462,7 +463,7 @@ static void phylink_mac_link_down(struct
- 
- 	if (ndev)
- 		netif_carrier_off(ndev);
--	pl->ops->mac_link_down(pl->config, pl->link_an_mode,
-+	pl->ops->mac_link_down(pl->config, pl->cur_link_an_mode,
- 			       pl->cur_interface);
- 	phylink_info(pl, "Link is Down\n");
- }
-@@ -481,7 +482,7 @@ static void phylink_resolve(struct work_
- 	} else if (pl->mac_link_dropped) {
- 		link_state.link = false;
- 	} else {
--		switch (pl->link_an_mode) {
-+		switch (pl->cur_link_an_mode) {
- 		case MLO_AN_PHY:
- 			link_state = pl->phy_state;
- 			phylink_resolve_flow(pl, &link_state);
-@@ -649,7 +650,7 @@ struct phylink *phylink_create(struct ph
- 		return ERR_PTR(ret);
- 	}
- 
--	if (pl->link_an_mode == MLO_AN_FIXED) {
-+	if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
- 		ret = phylink_parse_fixedlink(pl, fwnode);
- 		if (ret < 0) {
- 			kfree(pl);
-@@ -657,6 +658,8 @@ struct phylink *phylink_create(struct ph
- 		}
- 	}
- 
-+	pl->cur_link_an_mode = pl->cfg_link_an_mode;
-+
- 	ret = phylink_register_sfp(pl, fwnode);
- 	if (ret < 0) {
- 		kfree(pl);
-@@ -770,8 +773,8 @@ static int phylink_bringup_phy(struct ph
- static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
- 			      phy_interface_t interface)
- {
--	if (WARN_ON(pl->link_an_mode == MLO_AN_FIXED ||
--		    (pl->link_an_mode == MLO_AN_INBAND &&
-+	if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED ||
-+		    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
- 		     phy_interface_mode_is_8023z(interface))))
- 		return -EINVAL;
- 
-@@ -838,8 +841,8 @@ int phylink_of_phy_connect(struct phylin
- 	int ret;
- 
- 	/* Fixed links and 802.3z are handled without needing a PHY */
--	if (pl->link_an_mode == MLO_AN_FIXED ||
--	    (pl->link_an_mode == MLO_AN_INBAND &&
-+	if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
-+	    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
- 	     phy_interface_mode_is_8023z(pl->link_interface)))
- 		return 0;
- 
-@@ -850,7 +853,7 @@ int phylink_of_phy_connect(struct phylin
- 		phy_node = of_parse_phandle(dn, "phy-device", 0);
- 
- 	if (!phy_node) {
--		if (pl->link_an_mode == MLO_AN_PHY)
-+		if (pl->cfg_link_an_mode == MLO_AN_PHY)
- 			return -ENODEV;
- 		return 0;
- 	}
-@@ -913,7 +916,7 @@ int phylink_fixed_state_cb(struct phylin
- 	/* It does not make sense to let the link be overriden unless we use
- 	 * MLO_AN_FIXED
- 	 */
--	if (pl->link_an_mode != MLO_AN_FIXED)
-+	if (pl->cfg_link_an_mode != MLO_AN_FIXED)
- 		return -EINVAL;
- 
- 	mutex_lock(&pl->state_mutex);
-@@ -963,7 +966,7 @@ void phylink_start(struct phylink *pl)
- 	ASSERT_RTNL();
- 
- 	phylink_info(pl, "configuring for %s/%s link mode\n",
--		     phylink_an_mode_str(pl->link_an_mode),
-+		     phylink_an_mode_str(pl->cur_link_an_mode),
- 		     phy_modes(pl->link_config.interface));
- 
- 	/* Always set the carrier off */
-@@ -986,7 +989,7 @@ void phylink_start(struct phylink *pl)
- 	clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
- 	phylink_run_resolve(pl);
- 
--	if (pl->link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
-+	if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
- 		int irq = gpiod_to_irq(pl->link_gpio);
- 
- 		if (irq > 0) {
-@@ -1001,7 +1004,7 @@ void phylink_start(struct phylink *pl)
- 		if (irq <= 0)
- 			mod_timer(&pl->link_poll, jiffies + HZ);
- 	}
--	if (pl->link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
-+	if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
- 		mod_timer(&pl->link_poll, jiffies + HZ);
- 	if (pl->phydev)
- 		phy_start(pl->phydev);
-@@ -1128,7 +1131,7 @@ int phylink_ethtool_ksettings_get(struct
- 
- 	linkmode_copy(kset->link_modes.supported, pl->supported);
- 
--	switch (pl->link_an_mode) {
-+	switch (pl->cur_link_an_mode) {
- 	case MLO_AN_FIXED:
- 		/* We are using fixed settings. Report these as the
- 		 * current link settings - and note that these also
-@@ -1200,7 +1203,7 @@ int phylink_ethtool_ksettings_set(struct
- 		/* If we have a fixed link (as specified by firmware), refuse
- 		 * to change link parameters.
- 		 */
--		if (pl->link_an_mode == MLO_AN_FIXED &&
-+		if (pl->cur_link_an_mode == MLO_AN_FIXED &&
- 		    (s->speed != pl->link_config.speed ||
- 		     s->duplex != pl->link_config.duplex))
- 			return -EINVAL;
-@@ -1212,7 +1215,7 @@ int phylink_ethtool_ksettings_set(struct
- 		__clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
- 	} else {
- 		/* If we have a fixed link, refuse to enable autonegotiation */
--		if (pl->link_an_mode == MLO_AN_FIXED)
-+		if (pl->cur_link_an_mode == MLO_AN_FIXED)
- 			return -EINVAL;
- 
- 		config.speed = SPEED_UNKNOWN;
-@@ -1254,7 +1257,7 @@ int phylink_ethtool_ksettings_set(struct
- 	 * configuration. For a fixed link, this isn't able to change any
- 	 * parameters, which just leaves inband mode.
- 	 */
--	if (pl->link_an_mode == MLO_AN_INBAND &&
-+	if (pl->cur_link_an_mode == MLO_AN_INBAND &&
- 	    !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
- 		phylink_mac_config(pl, &pl->link_config);
- 		phylink_mac_an_restart(pl);
-@@ -1344,7 +1347,7 @@ int phylink_ethtool_set_pauseparam(struc
- 				   pause->tx_pause);
- 	} else if (!test_bit(PHYLINK_DISABLE_STOPPED,
- 			     &pl->phylink_disable_state)) {
--		switch (pl->link_an_mode) {
-+		switch (pl->cur_link_an_mode) {
- 		case MLO_AN_FIXED:
- 			/* Should we allow fixed links to change against the config? */
- 			phylink_resolve_flow(pl, config);
-@@ -1551,7 +1554,7 @@ static int phylink_mii_read(struct phyli
- 	struct phylink_link_state state;
- 	int val = 0xffff;
- 
--	switch (pl->link_an_mode) {
-+	switch (pl->cur_link_an_mode) {
- 	case MLO_AN_FIXED:
- 		if (phy_id == 0) {
- 			phylink_get_fixed_state(pl, &state);
-@@ -1579,7 +1582,7 @@ static int phylink_mii_read(struct phyli
- static int phylink_mii_write(struct phylink *pl, unsigned int phy_id,
- 			     unsigned int reg, unsigned int val)
- {
--	switch (pl->link_an_mode) {
-+	switch (pl->cur_link_an_mode) {
- 	case MLO_AN_FIXED:
- 		break;
- 
-@@ -1753,10 +1756,10 @@ static int phylink_sfp_module_insert(voi
- 		linkmode_copy(pl->link_config.advertising, config.advertising);
- 	}
- 
--	if (pl->link_an_mode != MLO_AN_INBAND ||
-+	if (pl->cur_link_an_mode != MLO_AN_INBAND ||
- 	    pl->link_config.interface != config.interface) {
- 		pl->link_config.interface = config.interface;
--		pl->link_an_mode = MLO_AN_INBAND;
-+		pl->cur_link_an_mode = MLO_AN_INBAND;
- 
- 		changed = true;
- 
diff --git a/target/linux/generic/pending-5.4/749-net-phylink-split-phylink_sfp_module_insert.patch b/target/linux/generic/pending-5.4/749-net-phylink-split-phylink_sfp_module_insert.patch
deleted file mode 100644
index b840d71c43..0000000000
--- a/target/linux/generic/pending-5.4/749-net-phylink-split-phylink_sfp_module_insert.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From 36569971241ae6b81376da4937d2c8760122d10b Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 21 Nov 2019 17:58:58 +0000
-Subject: [PATCH 652/660] net: phylink: split phylink_sfp_module_insert()
-
-Split out the configuration step from phylink_sfp_module_insert() so
-we can re-use this later.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 47 +++++++++++++++++++++++----------------
- 1 file changed, 28 insertions(+), 19 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1688,25 +1688,21 @@ static void phylink_sfp_detach(void *ups
- 	pl->netdev->sfp_bus = NULL;
- }
- 
--static int phylink_sfp_module_insert(void *upstream,
--				     const struct sfp_eeprom_id *id)
-+static int phylink_sfp_config(struct phylink *pl, u8 mode, u8 port,
-+			      const unsigned long *supported,
-+			      const unsigned long *advertising)
- {
--	struct phylink *pl = upstream;
--	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
- 	__ETHTOOL_DECLARE_LINK_MODE_MASK(support1);
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support);
- 	struct phylink_link_state config;
- 	phy_interface_t iface;
--	int ret = 0;
- 	bool changed;
--	u8 port;
-+	int ret;
- 
--	ASSERT_RTNL();
--
--	sfp_parse_support(pl->sfp_bus, id, support);
--	port = sfp_parse_port(pl->sfp_bus, id, support);
-+	linkmode_copy(support, supported);
- 
- 	memset(&config, 0, sizeof(config));
--	linkmode_copy(config.advertising, support);
-+	linkmode_copy(config.advertising, advertising);
- 	config.interface = PHY_INTERFACE_MODE_NA;
- 	config.speed = SPEED_UNKNOWN;
- 	config.duplex = DUPLEX_UNKNOWN;
-@@ -1721,8 +1717,6 @@ static int phylink_sfp_module_insert(voi
- 		return ret;
- 	}
- 
--	linkmode_copy(support1, support);
--
- 	iface = sfp_select_interface(pl->sfp_bus, config.advertising);
- 	if (iface == PHY_INTERFACE_MODE_NA) {
- 		phylink_err(pl,
-@@ -1732,18 +1726,18 @@ static int phylink_sfp_module_insert(voi
- 	}
- 
- 	config.interface = iface;
-+	linkmode_copy(support1, support);
- 	ret = phylink_validate(pl, support1, &config);
- 	if (ret) {
- 		phylink_err(pl, "validation of %s/%s with support %*pb failed: %d\n",
--			    phylink_an_mode_str(MLO_AN_INBAND),
-+			    phylink_an_mode_str(mode),
- 			    phy_modes(config.interface),
- 			    __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
- 		return ret;
- 	}
- 
- 	phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n",
--		    phylink_an_mode_str(MLO_AN_INBAND),
--		    phy_modes(config.interface),
-+		    phylink_an_mode_str(mode), phy_modes(config.interface),
- 		    __ETHTOOL_LINK_MODE_MASK_NBITS, support);
- 
- 	if (phy_interface_mode_is_8023z(iface) && pl->phydev)
-@@ -1756,15 +1750,15 @@ static int phylink_sfp_module_insert(voi
- 		linkmode_copy(pl->link_config.advertising, config.advertising);
- 	}
- 
--	if (pl->cur_link_an_mode != MLO_AN_INBAND ||
-+	if (pl->cur_link_an_mode != mode ||
- 	    pl->link_config.interface != config.interface) {
- 		pl->link_config.interface = config.interface;
--		pl->cur_link_an_mode = MLO_AN_INBAND;
-+		pl->cur_link_an_mode = mode;
- 
- 		changed = true;
- 
- 		phylink_info(pl, "switched to %s/%s link mode\n",
--			     phylink_an_mode_str(MLO_AN_INBAND),
-+			     phylink_an_mode_str(mode),
- 			     phy_modes(config.interface));
- 	}
- 
-@@ -1777,6 +1771,21 @@ static int phylink_sfp_module_insert(voi
- 	return ret;
- }
- 
-+static int phylink_sfp_module_insert(void *upstream,
-+				     const struct sfp_eeprom_id *id)
-+{
-+	struct phylink *pl = upstream;
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
-+	u8 port;
-+
-+	ASSERT_RTNL();
-+
-+	sfp_parse_support(pl->sfp_bus, id, support);
-+	port = sfp_parse_port(pl->sfp_bus, id, support);
-+
-+	return phylink_sfp_config(pl, MLO_AN_INBAND, port, support, support);
-+}
-+
- static int phylink_sfp_module_start(void *upstream)
- {
- 	struct phylink *pl = upstream;
diff --git a/target/linux/generic/pending-5.4/750-net-phylink-delay-MAC-configuration-for-copper-SFP-m.patch b/target/linux/generic/pending-5.4/750-net-phylink-delay-MAC-configuration-for-copper-SFP-m.patch
deleted file mode 100644
index 667170a398..0000000000
--- a/target/linux/generic/pending-5.4/750-net-phylink-delay-MAC-configuration-for-copper-SFP-m.patch
+++ /dev/null
@@ -1,201 +0,0 @@
-From 52c956003a9d5bcae1f445f9dfd42b624adb6e87 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Wed, 11 Dec 2019 10:56:45 +0000
-Subject: [PATCH] net: phylink: delay MAC configuration for copper SFP modules
-
-Knowing whether we need to delay the MAC configuration because a module
-may have a PHY is useful to phylink to allow NBASE-T modules to work on
-systems supporting no more than 2.5G speeds.
-
-This commit allows us to delay such configuration until after the PHY
-has been probed by recording the parsed capabilities, and if the module
-may have a PHY, doing no more until the module_start() notification is
-called.  At that point, we either have a PHY, or we don't.
-
-We move the PHY-based setup a little later, and use the PHYs support
-capabilities rather than the EEPROM parsed capabilities to determine
-whether we can support the PHY.
-
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phylink.c | 53 +++++++++++++++++++++++++++++++--------
- drivers/net/phy/sfp-bus.c | 28 +++++++++++++++++++++
- include/linux/sfp.h       |  7 ++++++
- 3 files changed, 78 insertions(+), 10 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -72,6 +72,9 @@ struct phylink {
- 	bool mac_link_dropped;
- 
- 	struct sfp_bus *sfp_bus;
-+	bool sfp_may_have_phy;
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
-+	u8 sfp_port;
- };
- 
- #define phylink_printk(level, pl, fmt, ...) \
-@@ -1688,7 +1691,7 @@ static void phylink_sfp_detach(void *ups
- 	pl->netdev->sfp_bus = NULL;
- }
- 
--static int phylink_sfp_config(struct phylink *pl, u8 mode, u8 port,
-+static int phylink_sfp_config(struct phylink *pl, u8 mode,
- 			      const unsigned long *supported,
- 			      const unsigned long *advertising)
- {
-@@ -1762,7 +1765,7 @@ static int phylink_sfp_config(struct phy
- 			     phy_modes(config.interface));
- 	}
- 
--	pl->link_port = port;
-+	pl->link_port = pl->sfp_port;
- 
- 	if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
- 				 &pl->phylink_disable_state))
-@@ -1775,15 +1778,20 @@ static int phylink_sfp_module_insert(voi
- 				     const struct sfp_eeprom_id *id)
- {
- 	struct phylink *pl = upstream;
--	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
--	u8 port;
-+	unsigned long *support = pl->sfp_support;
- 
- 	ASSERT_RTNL();
- 
-+	linkmode_zero(support);
- 	sfp_parse_support(pl->sfp_bus, id, support);
--	port = sfp_parse_port(pl->sfp_bus, id, support);
-+	pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, support);
- 
--	return phylink_sfp_config(pl, MLO_AN_INBAND, port, support, support);
-+	/* If this module may have a PHY connecting later, defer until later */
-+	pl->sfp_may_have_phy = sfp_may_have_phy(pl->sfp_bus, id);
-+	if (pl->sfp_may_have_phy)
-+		return 0;
-+
-+	return phylink_sfp_config(pl, MLO_AN_INBAND, support, support);
- }
- 
- static int phylink_sfp_module_start(void *upstream)
-@@ -1791,10 +1799,19 @@ static int phylink_sfp_module_start(void
- 	struct phylink *pl = upstream;
- 
- 	/* If this SFP module has a PHY, start the PHY now. */
--	if (pl->phydev)
-+	if (pl->phydev) {
- 		phy_start(pl->phydev);
--		
--	return 0;
-+		return 0;
-+	}
-+
-+	/* If the module may have a PHY but we didn't detect one we
-+	 * need to configure the MAC here.
-+	 */
-+	if (!pl->sfp_may_have_phy)
-+		return 0;
-+
-+	return phylink_sfp_config(pl, MLO_AN_INBAND,
-+				  pl->sfp_support, pl->sfp_support);
- }
- 
- static void phylink_sfp_module_stop(void *upstream)
-@@ -1828,10 +1845,26 @@ static void phylink_sfp_link_up(void *up
- static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
- {
- 	struct phylink *pl = upstream;
--	phy_interface_t interface = pl->link_config.interface;
-+	phy_interface_t interface;
- 	int ret;
- 
--	ret = phylink_attach_phy(pl, phy, pl->link_config.interface);
-+	/*
-+	 * This is the new way of dealing with flow control for PHYs,
-+	 * as described by Timur Tabi in commit 529ed1275263 ("net: phy:
-+	 * phy drivers should not set SUPPORTED_[Asym_]Pause") except
-+	 * using our validate call to the MAC, we rely upon the MAC
-+	 * clearing the bits from both supported and advertising fields.
-+	 */
-+	phy_support_asym_pause(phy);
-+
-+	/* Do the initial configuration */
-+	ret = phylink_sfp_config(pl, MLO_AN_INBAND, phy->supported,
-+				 phy->advertising);
-+	if (ret < 0)
-+		return ret;
-+
-+	interface = pl->link_config.interface;
-+	ret = phylink_attach_phy(pl, phy, interface);
- 	if (ret < 0)
- 		return ret;
- 
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -103,6 +103,7 @@ static const struct sfp_quirk *sfp_looku
- 
- 	return NULL;
- }
-+
- /**
-  * sfp_parse_port() - Parse the EEPROM base ID, setting the port type
-  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
-@@ -179,6 +180,33 @@ int sfp_parse_port(struct sfp_bus *bus,
- EXPORT_SYMBOL_GPL(sfp_parse_port);
- 
- /**
-+ * sfp_may_have_phy() - indicate whether the module may have a PHY
-+ * @bus: a pointer to the &struct sfp_bus structure for the sfp module
-+ * @id: a pointer to the module's &struct sfp_eeprom_id
-+ *
-+ * Parse the EEPROM identification given in @id, and return whether
-+ * this module may have a PHY.
-+ */
-+bool sfp_may_have_phy(struct sfp_bus *bus, const struct sfp_eeprom_id *id)
-+{
-+	if (id->base.e1000_base_t)
-+		return true;
-+
-+	if (id->base.phys_id != SFF8024_ID_DWDM_SFP) {
-+		switch (id->base.extended_cc) {
-+		case SFF8024_ECC_10GBASE_T_SFI:
-+		case SFF8024_ECC_10GBASE_T_SR:
-+		case SFF8024_ECC_5GBASE_T:
-+		case SFF8024_ECC_2_5GBASE_T:
-+			return true;
-+		}
-+	}
-+
-+	return false;
-+}
-+EXPORT_SYMBOL_GPL(sfp_may_have_phy);
-+
-+/**
-  * sfp_parse_support() - Parse the eeprom id for supported link modes
-  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
-  * @id: a pointer to the module's &struct sfp_eeprom_id
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -533,6 +533,7 @@ struct sfp_upstream_ops {
- #if IS_ENABLED(CONFIG_SFP)
- int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
- 		   unsigned long *support);
-+bool sfp_may_have_phy(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
- void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
- 		       unsigned long *support);
- phy_interface_t sfp_select_interface(struct sfp_bus *bus,
-@@ -556,6 +557,12 @@ static inline int sfp_parse_port(struct
- 	return PORT_OTHER;
- }
- 
-+static inline bool sfp_may_have_phy(struct sfp_bus *bus,
-+				    const struct sfp_eeprom_id *id)
-+{
-+	return false;
-+}
-+
- static inline void sfp_parse_support(struct sfp_bus *bus,
- 				     const struct sfp_eeprom_id *id,
- 				     unsigned long *support)
diff --git a/target/linux/generic/pending-5.4/751-net-phylink-make-Broadcom-BCM84881-based-SFPs-work.patch b/target/linux/generic/pending-5.4/751-net-phylink-make-Broadcom-BCM84881-based-SFPs-work.patch
deleted file mode 100644
index d58304410a..0000000000
--- a/target/linux/generic/pending-5.4/751-net-phylink-make-Broadcom-BCM84881-based-SFPs-work.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 7adb5b2126bc013f0964ddaefad6ad1b132e86c3 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Wed, 11 Dec 2019 10:56:50 +0000
-Subject: [PATCH] net: phylink: make Broadcom BCM84881 based SFPs work
-
-The Broadcom BCM84881 does not appear to send the SGMII control word
-when operating in SGMII mode, which causes network adapters to fail
-to link with the PHY, or decide to operate at fixed 1G speed, even if
-the PHY negotiated 100M.
-
-Work around this by detecting the Broadcom BCM84881 and switch to phy
-mode rather than inband mode.
-
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phylink.c | 18 ++++++++++++++++--
- 1 file changed, 16 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1842,10 +1842,20 @@ static void phylink_sfp_link_up(void *up
- 	phylink_run_resolve(pl);
- }
- 
-+/* The Broadcom BCM84881 in the Methode DM7052 is unable to provide a SGMII
-+ * or 802.3z control word, so inband will not work.
-+ */
-+static bool phylink_phy_no_inband(struct phy_device *phy)
-+{
-+	return phy->is_c45 &&
-+		(phy->c45_ids.device_ids[1] & 0xfffffff0) == 0xae025150;
-+}
-+
- static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
- {
- 	struct phylink *pl = upstream;
- 	phy_interface_t interface;
-+	u8 mode;
- 	int ret;
- 
- 	/*
-@@ -1857,9 +1867,13 @@ static int phylink_sfp_connect_phy(void
- 	 */
- 	phy_support_asym_pause(phy);
- 
-+	if (phylink_phy_no_inband(phy))
-+		mode = MLO_AN_PHY;
-+	else
-+		mode = MLO_AN_INBAND;
-+
- 	/* Do the initial configuration */
--	ret = phylink_sfp_config(pl, MLO_AN_INBAND, phy->supported,
--				 phy->advertising);
-+	ret = phylink_sfp_config(pl, mode, phy->supported, phy->advertising);
- 	if (ret < 0)
- 		return ret;
- 
diff --git a/target/linux/generic/pending-5.4/752-net-phy-add-Broadcom-BCM84881-PHY-driver.patch b/target/linux/generic/pending-5.4/752-net-phy-add-Broadcom-BCM84881-PHY-driver.patch
deleted file mode 100644
index 783dec0479..0000000000
--- a/target/linux/generic/pending-5.4/752-net-phy-add-Broadcom-BCM84881-PHY-driver.patch
+++ /dev/null
@@ -1,315 +0,0 @@
-From 75f4d8d10e016f7428c268424483a927ee7a78bb Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Wed, 11 Dec 2019 10:56:56 +0000
-Subject: [PATCH] net: phy: add Broadcom BCM84881 PHY driver
-
-Add a rudimentary Clause 45 driver for the BCM84881 PHY, found on
-Methode DM7052 SFPs.
-
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/Kconfig    |   6 +
- drivers/net/phy/Makefile   |   1 +
- drivers/net/phy/bcm84881.c | 269 +++++++++++++++++++++++++++++++++++++
- 3 files changed, 276 insertions(+)
- create mode 100644 drivers/net/phy/bcm84881.c
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -330,6 +330,12 @@ config BROADCOM_PHY
- 	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
- 	  BCM5481, BCM54810 and BCM5482 PHYs.
- 
-+config BCM84881_PHY
-+	tristate "Broadcom BCM84881 PHY"
-+	depends on PHYLIB
-+	---help---
-+	  Support the Broadcom BCM84881 PHY.
-+
- config CICADA_PHY
- 	tristate "Cicada PHYs"
- 	---help---
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -62,6 +62,7 @@ obj-$(CONFIG_BCM87XX_PHY)	+= bcm87xx.o
- obj-$(CONFIG_BCM_CYGNUS_PHY)	+= bcm-cygnus.o
- obj-$(CONFIG_BCM_NET_PHYLIB)	+= bcm-phy-lib.o
- obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
-+obj-$(CONFIG_BCM84881_PHY)	+= bcm84881.o
- obj-$(CONFIG_CICADA_PHY)	+= cicada.o
- obj-$(CONFIG_CORTINA_PHY)	+= cortina.o
- obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o
---- /dev/null
-+++ b/drivers/net/phy/bcm84881.c
-@@ -0,0 +1,269 @@
-+// SPDX-License-Identifier: GPL-2.0
-+// Broadcom BCM84881 NBASE-T PHY driver, as found on a SFP+ module.
-+// Copyright (C) 2019 Russell King, Deep Blue Solutions Ltd.
-+//
-+// Like the Marvell 88x3310, the Broadcom 84881 changes its host-side
-+// interface according to the operating speed between 10GBASE-R,
-+// 2500BASE-X and SGMII (but unlike the 88x3310, without the control
-+// word).
-+//
-+// This driver only supports those aspects of the PHY that I'm able to
-+// observe and test with the SFP+ module, which is an incomplete subset
-+// of what this PHY is able to support. For example, I only assume it
-+// supports a single lane Serdes connection, but it may be that the PHY
-+// is able to support more than that.
-+#include <linux/delay.h>
-+#include <linux/module.h>
-+#include <linux/phy.h>
-+
-+enum {
-+	MDIO_AN_C22 = 0xffe0,
-+};
-+
-+static int bcm84881_wait_init(struct phy_device *phydev)
-+{
-+	unsigned int tries = 20;
-+	int ret, val;
-+
-+	do {
-+		val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
-+		if (val < 0) {
-+			ret = val;
-+			break;
-+		}
-+		if (!(val & MDIO_CTRL1_RESET)) {
-+			ret = 0;
-+			break;
-+		}
-+		if (!--tries) {
-+			ret = -ETIMEDOUT;
-+			break;
-+		}
-+		msleep(100);
-+	} while (1);
-+
-+	if (ret)
-+		phydev_err(phydev, "%s failed: %d\n", __func__, ret);
-+
-+	return ret;
-+}
-+
-+static int bcm84881_config_init(struct phy_device *phydev)
-+{
-+	switch (phydev->interface) {
-+	case PHY_INTERFACE_MODE_SGMII:
-+	case PHY_INTERFACE_MODE_2500BASEX:
-+	case PHY_INTERFACE_MODE_10GKR:
-+		break;
-+	default:
-+		return -ENODEV;
-+	}
-+	return 0;
-+}
-+
-+static int bcm84881_probe(struct phy_device *phydev)
-+{
-+	/* This driver requires PMAPMD and AN blocks */
-+	const u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN;
-+
-+	if (!phydev->is_c45 ||
-+	    (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask)
-+		return -ENODEV;
-+
-+	return 0;
-+}
-+
-+static int bcm84881_get_features(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = genphy_c45_pma_read_abilities(phydev);
-+	if (ret)
-+		return ret;
-+
-+	/* Although the PHY sets bit 1.11.8, it does not support 10M modes */
-+	linkmode_clear_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
-+			   phydev->supported);
-+	linkmode_clear_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
-+			   phydev->supported);
-+
-+	return 0;
-+}
-+
-+static int bcm84881_config_aneg(struct phy_device *phydev)
-+{
-+	bool changed = false;
-+	u32 adv;
-+	int ret;
-+
-+	/* Wait for the PHY to finish initialising, otherwise our
-+	 * advertisement may be overwritten.
-+	 */
-+	ret = bcm84881_wait_init(phydev);
-+	if (ret)
-+		return ret;
-+
-+	/* We don't support manual MDI control */
-+	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
-+
-+	/* disabled autoneg doesn't seem to work with this PHY */
-+	if (phydev->autoneg == AUTONEG_DISABLE)
-+		return -EINVAL;
-+
-+	ret = genphy_c45_an_config_aneg(phydev);
-+	if (ret < 0)
-+		return ret;
-+	if (ret > 0)
-+		changed = true;
-+
-+	adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
-+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN,
-+				     MDIO_AN_C22 + MII_CTRL1000,
-+				     ADVERTISE_1000FULL | ADVERTISE_1000HALF,
-+				     adv);
-+	if (ret < 0)
-+		return ret;
-+	if (ret > 0)
-+		changed = true;
-+
-+	return genphy_c45_check_and_restart_aneg(phydev, changed);
-+}
-+
-+static int bcm84881_aneg_done(struct phy_device *phydev)
-+{
-+	int bmsr, val;
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
-+	if (val < 0)
-+		return val;
-+
-+	bmsr = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_C22 + MII_BMSR);
-+	if (bmsr < 0)
-+		return val;
-+
-+	return !!(val & MDIO_AN_STAT1_COMPLETE) &&
-+	       !!(bmsr & BMSR_ANEGCOMPLETE);
-+}
-+
-+static int bcm84881_read_status(struct phy_device *phydev)
-+{
-+	unsigned int mode;
-+	int bmsr, val;
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
-+	if (val < 0)
-+		return val;
-+
-+	if (val & MDIO_AN_CTRL1_RESTART) {
-+		phydev->link = 0;
-+		return 0;
-+	}
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
-+	if (val < 0)
-+		return val;
-+
-+	bmsr = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_C22 + MII_BMSR);
-+	if (bmsr < 0)
-+		return val;
-+
-+	phydev->autoneg_complete = !!(val & MDIO_AN_STAT1_COMPLETE) &&
-+				   !!(bmsr & BMSR_ANEGCOMPLETE);
-+	phydev->link = !!(val & MDIO_STAT1_LSTATUS) &&
-+		       !!(bmsr & BMSR_LSTATUS);
-+	if (phydev->autoneg == AUTONEG_ENABLE && !phydev->autoneg_complete)
-+		phydev->link = false;
-+
-+	if (!phydev->link)
-+		return 0;
-+
-+	linkmode_zero(phydev->lp_advertising);
-+	phydev->speed = SPEED_UNKNOWN;
-+	phydev->duplex = DUPLEX_UNKNOWN;
-+	phydev->pause = 0;
-+	phydev->asym_pause = 0;
-+	phydev->mdix = 0;
-+
-+	if (phydev->autoneg_complete) {
-+		val = genphy_c45_read_lpa(phydev);
-+		if (val < 0)
-+			return val;
-+
-+		val = phy_read_mmd(phydev, MDIO_MMD_AN,
-+				   MDIO_AN_C22 + MII_STAT1000);
-+		if (val < 0)
-+			return val;
-+
-+		mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, val);
-+
-+		if (phydev->autoneg == AUTONEG_ENABLE)
-+			phy_resolve_aneg_linkmode(phydev);
-+	}
-+
-+	if (phydev->autoneg == AUTONEG_DISABLE) {
-+		/* disabled autoneg doesn't seem to work, so force the link
-+		 * down.
-+		 */
-+		phydev->link = 0;
-+		return 0;
-+	}
-+
-+	/* Set the host link mode - we set the phy interface mode and
-+	 * the speed according to this register so that downshift works.
-+	 * We leave the duplex setting as per the resolution from the
-+	 * above.
-+	 */
-+	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, 0x4011);
-+	mode = (val & 0x1e) >> 1;
-+	if (mode == 1 || mode == 2)
-+		phydev->interface = PHY_INTERFACE_MODE_SGMII;
-+	else if (mode == 3)
-+		phydev->interface = PHY_INTERFACE_MODE_10GKR;
-+	else if (mode == 4)
-+		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
-+	switch (mode & 7) {
-+	case 1:
-+		phydev->speed = SPEED_100;
-+		break;
-+	case 2:
-+		phydev->speed = SPEED_1000;
-+		break;
-+	case 3:
-+		phydev->speed = SPEED_10000;
-+		break;
-+	case 4:
-+		phydev->speed = SPEED_2500;
-+		break;
-+	case 5:
-+		phydev->speed = SPEED_5000;
-+		break;
-+	}
-+
-+	return genphy_c45_read_mdix(phydev);
-+}
-+
-+static struct phy_driver bcm84881_drivers[] = {
-+	{
-+		.phy_id		= 0xae025150,
-+		.phy_id_mask	= 0xfffffff0,
-+		.name		= "Broadcom BCM84881",
-+		.config_init	= bcm84881_config_init,
-+		.probe		= bcm84881_probe,
-+		.get_features	= bcm84881_get_features,
-+		.config_aneg	= bcm84881_config_aneg,
-+		.aneg_done	= bcm84881_aneg_done,
-+		.read_status	= bcm84881_read_status,
-+	},
-+};
-+
-+module_phy_driver(bcm84881_drivers);
-+
-+/* FIXME: module auto-loading for Clause 45 PHYs seems non-functional */
-+static struct mdio_device_id __maybe_unused bcm84881_tbl[] = {
-+	{ 0xae025150, 0xfffffff0 },
-+	{ },
-+};
-+MODULE_AUTHOR("Russell King");
-+MODULE_DESCRIPTION("Broadcom BCM84881 PHY driver");
-+MODULE_DEVICE_TABLE(mdio, bcm84881_tbl);
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/pending-5.4/753-net-sfp-add-support-for-Clause-45-PHYs.patch b/target/linux/generic/pending-5.4/753-net-sfp-add-support-for-Clause-45-PHYs.patch
deleted file mode 100644
index dcd1ba7ef3..0000000000
--- a/target/linux/generic/pending-5.4/753-net-sfp-add-support-for-Clause-45-PHYs.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 6df6709dc3d00e0bc948d45dfa8d8f18ba379c48 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 5 Nov 2019 11:56:18 +0000
-Subject: [PATCH 656/660] net: sfp: add support for Clause 45 PHYs
-
-Some SFP+ modules have a Clause 45 PHY onboard, which is accessible via
-the normal I2C address.  Detect 10G BASE-T PHYs which may have an
-accessible PHY and probe for it.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 44 +++++++++++++++++++++++++++++++++++++++----
- 1 file changed, 40 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1418,12 +1418,12 @@ static void sfp_sm_phy_detach(struct sfp
- 	sfp->mod_phy = NULL;
- }
- 
--static void sfp_sm_probe_phy(struct sfp *sfp)
-+static void sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
- {
- 	struct phy_device *phy;
- 	int err;
- 
--	phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
-+	phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
- 	if (phy == ERR_PTR(-ENODEV)) {
- 		dev_info(sfp->dev, "no PHY detected\n");
- 		return;
-@@ -1433,6 +1433,13 @@ static void sfp_sm_probe_phy(struct sfp
- 		return;
- 	}
- 
-+	err = phy_device_register(phy);
-+	if (err) {
-+		phy_device_free(phy);
-+		dev_err(sfp->dev, "phy_device_register failed: %d\n", err);
-+		return;
-+	}
-+
- 	err = sfp_add_phy(sfp->sfp_bus, phy);
- 	if (err) {
- 		phy_device_remove(phy);
-@@ -1503,10 +1510,32 @@ static void sfp_sm_fault(struct sfp *sfp
- 	}
- }
- 
-+/* Probe a SFP for a PHY device if the module supports copper - the PHY
-+ * normally sits at I2C bus address 0x56, and may either be a clause 22
-+ * or clause 45 PHY.
-+ *
-+ * Clause 22 copper SFP modules normally operate in Cisco SGMII mode with
-+ * negotiation enabled, but some may be in 1000base-X - which is for the
-+ * PHY driver to determine.
-+ *
-+ * Clause 45 copper SFP+ modules (10G) appear to switch their interface
-+ * mode according to the negotiated line speed.
-+ */
- static void sfp_sm_probe_for_phy(struct sfp *sfp)
- {
--	if (sfp->id.base.e1000_base_t)
--		sfp_sm_probe_phy(sfp);
-+	switch (sfp->id.base.extended_cc) {
-+	case SFF8024_ECC_10GBASE_T_SFI:
-+	case SFF8024_ECC_10GBASE_T_SR:
-+	case SFF8024_ECC_5GBASE_T:
-+	case SFF8024_ECC_2_5GBASE_T:
-+		sfp_sm_probe_phy(sfp, true);
-+		break;
-+
-+	default:
-+		if (sfp->id.base.e1000_base_t)
-+			sfp_sm_probe_phy(sfp, false);
-+		break;
-+	}
- }
- 
- static int sfp_module_parse_power(struct sfp *sfp)
-@@ -1566,6 +1595,13 @@ static int sfp_sm_mod_hpower(struct sfp
- 		return -EAGAIN;
- 	}
- 
-+	/* DM7052 reports as a high power module, responds to reads (with
-+	 * all bytes 0xff) at 0x51 but does not accept writes.  In any case,
-+	 * if the bit is already set, we're already in high power mode.
-+	 */
-+	if (!!(val & BIT(0)) == enable)
-+		return 0;
-+
- 	if (enable)
- 		val |= BIT(0);
- 	else
diff --git a/target/linux/generic/pending-5.4/754-net-sfp-fix-unbind.patch b/target/linux/generic/pending-5.4/754-net-sfp-fix-unbind.patch
deleted file mode 100644
index c31922e021..0000000000
--- a/target/linux/generic/pending-5.4/754-net-sfp-fix-unbind.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 729fd05aac22cdf1e502fbf1bf80e5ebba0d9fbc Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 3 Dec 2019 17:48:28 +0000
-Subject: [PATCH] net: sfp: fix unbind
-
-When unbinding, we don't correctly tear down the module state, leaving
-(for example) the hwmon registration behind. Ensure everything is
-properly removed by sending a remove event at unbind.
-
-Fixes: 6b0da5c9c1a3 ("net: sfp: track upstream's attachment state in state machine")
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -2431,6 +2431,10 @@ static int sfp_remove(struct platform_de
- 
- 	sfp_unregister_socket(sfp->sfp_bus);
- 
-+	rtnl_lock();
-+	sfp_sm_event(sfp, SFP_E_REMOVE);
-+	rtnl_unlock();
-+
- 	return 0;
- }
- 
diff --git a/target/linux/generic/pending-5.4/755-net-sfp-fix-hwmon.patch b/target/linux/generic/pending-5.4/755-net-sfp-fix-hwmon.patch
deleted file mode 100644
index a18e4801a2..0000000000
--- a/target/linux/generic/pending-5.4/755-net-sfp-fix-hwmon.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 5eb0df5023c6ae8a71a7848fd5e1f788d86e51ae Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 3 Dec 2019 18:46:04 +0000
-Subject: [PATCH] net: sfp: fix hwmon
-
-The referenced commit below allowed more than one hwmon device to be
-created per SFP, which is definitely not what we want. Avoid this by
-only creating the hwmon device just as we transition to WAITDEV state.
-
-Fixes: 139d3a212a1f ("net: sfp: allow modules with slow diagnostics to probe")
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 13 ++++---------
- 1 file changed, 4 insertions(+), 9 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1883,6 +1883,10 @@ static void sfp_sm_module(struct sfp *sf
- 			break;
- 		}
- 
-+		err = sfp_hwmon_insert(sfp);
-+		if (err)
-+			dev_warn(sfp->dev, "hwmon probe failed: %d\n", err);
-+
- 		sfp_sm_mod_next(sfp, SFP_MOD_WAITDEV, 0);
- 		/* fall through */
- 	case SFP_MOD_WAITDEV:
-@@ -1932,15 +1936,6 @@ static void sfp_sm_module(struct sfp *sf
- 	case SFP_MOD_ERROR:
- 		break;
- 	}
--
--#if IS_ENABLED(CONFIG_HWMON)
--	if (sfp->sm_mod_state >= SFP_MOD_WAITDEV &&
--	    IS_ERR_OR_NULL(sfp->hwmon_dev)) {
--		err = sfp_hwmon_insert(sfp);
--		if (err)
--			dev_warn(sfp->dev, "hwmon probe failed: %d\n", err);
--	}
--#endif
- }
- 
- static void sfp_sm_main(struct sfp *sfp, unsigned int event)
diff --git a/target/linux/generic/pending-5.4/756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch b/target/linux/generic/pending-5.4/756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch
deleted file mode 100644
index ba4f8c40c4..0000000000
--- a/target/linux/generic/pending-5.4/756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 4d6bfb6fbb00af38402db4d1ce464e22def9fd9e Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 28 Nov 2019 14:24:40 +0000
-Subject: [PATCH 1/4] net: sfp: use a definition for the fault recovery
- attempts
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 14 +++++++++++---
- 1 file changed, 11 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -172,6 +172,14 @@ static const enum gpiod_flags gpio_flags
- #define T_RESET_US		10
- #define T_FAULT_RECOVER		msecs_to_jiffies(1000)
- 
-+/* N_FAULT_INIT is the number of recovery attempts at module initialisation
-+ * time. If the TX_FAULT signal is not deasserted after this number of
-+ * attempts at clearing it, we decide that the module is faulty.
-+ * N_FAULT is the same but after the module has initialised.
-+ */
-+#define N_FAULT_INIT		5
-+#define N_FAULT			5
-+
- /* SFP module presence detection is poor: the three MOD DEF signals are
-  * the same length on the PCB, which means it's possible for MOD DEF 0 to
-  * connect before the I2C bus on MOD DEF 1/2.
-@@ -1972,7 +1980,7 @@ static void sfp_sm_main(struct sfp *sfp,
- 		sfp_module_tx_enable(sfp);
- 
- 		/* Initialise the fault clearance retries */
--		sfp->sm_retries = 5;
-+		sfp->sm_retries = N_FAULT_INIT;
- 
- 		/* We need to check the TX_FAULT state, which is not defined
- 		 * while TX_DISABLE is asserted. The earliest we want to do
-@@ -2012,7 +2020,7 @@ static void sfp_sm_main(struct sfp *sfp,
- 			 * or t_start_up, so assume there is a fault.
- 			 */
- 			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
--				     sfp->sm_retries == 5);
-+				     sfp->sm_retries == N_FAULT_INIT);
- 		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
- 	init_done:	/* TX_FAULT deasserted or we timed out with TX_FAULT
- 			 * clear.  Probe for the PHY and check the LOS state.
-@@ -2025,7 +2033,7 @@ static void sfp_sm_main(struct sfp *sfp,
- 			sfp_sm_link_check_los(sfp);
- 
- 			/* Reset the fault retry count */
--			sfp->sm_retries = 5;
-+			sfp->sm_retries = N_FAULT;
- 		}
- 		break;
- 
diff --git a/target/linux/generic/pending-5.4/757-net-sfp-rename-sm_retries.patch b/target/linux/generic/pending-5.4/757-net-sfp-rename-sm_retries.patch
deleted file mode 100644
index 13f3b6ccff..0000000000
--- a/target/linux/generic/pending-5.4/757-net-sfp-rename-sm_retries.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From bfa3cbb01c7ea34d7369c9bd2ec1b2dc67082b04 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Mon, 2 Dec 2019 18:06:44 +0000
-Subject: [PATCH 2/4] net: sfp: rename sm_retries
-
-Rename sm_retries as sm_fault_retries, as this is what this member is
-tracking.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -235,7 +235,7 @@ struct sfp {
- 	unsigned char sm_mod_tries;
- 	unsigned char sm_dev_state;
- 	unsigned short sm_state;
--	unsigned int sm_retries;
-+	unsigned char sm_fault_retries;
- 
- 	struct sfp_eeprom_id id;
- 	unsigned int module_power_mW;
-@@ -1506,7 +1506,7 @@ static bool sfp_los_event_inactive(struc
- 
- static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn)
- {
--	if (sfp->sm_retries && !--sfp->sm_retries) {
-+	if (sfp->sm_fault_retries && !--sfp->sm_fault_retries) {
- 		dev_err(sfp->dev,
- 			"module persistently indicates fault, disabling\n");
- 		sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0);
-@@ -1980,7 +1980,7 @@ static void sfp_sm_main(struct sfp *sfp,
- 		sfp_module_tx_enable(sfp);
- 
- 		/* Initialise the fault clearance retries */
--		sfp->sm_retries = N_FAULT_INIT;
-+		sfp->sm_fault_retries = N_FAULT_INIT;
- 
- 		/* We need to check the TX_FAULT state, which is not defined
- 		 * while TX_DISABLE is asserted. The earliest we want to do
-@@ -2020,7 +2020,7 @@ static void sfp_sm_main(struct sfp *sfp,
- 			 * or t_start_up, so assume there is a fault.
- 			 */
- 			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
--				     sfp->sm_retries == N_FAULT_INIT);
-+				     sfp->sm_fault_retries == N_FAULT_INIT);
- 		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
- 	init_done:	/* TX_FAULT deasserted or we timed out with TX_FAULT
- 			 * clear.  Probe for the PHY and check the LOS state.
-@@ -2033,7 +2033,7 @@ static void sfp_sm_main(struct sfp *sfp,
- 			sfp_sm_link_check_los(sfp);
- 
- 			/* Reset the fault retry count */
--			sfp->sm_retries = N_FAULT;
-+			sfp->sm_fault_retries = N_FAULT;
- 		}
- 		break;
- 
diff --git a/target/linux/generic/pending-5.4/758-net-sfp-error-handling-for-phy-probe.patch b/target/linux/generic/pending-5.4/758-net-sfp-error-handling-for-phy-probe.patch
deleted file mode 100644
index dfa772dc72..0000000000
--- a/target/linux/generic/pending-5.4/758-net-sfp-error-handling-for-phy-probe.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 1fba543dc8edf4a43bff3276306648bb27c1e207 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 29 Nov 2019 00:30:08 +0000
-Subject: [PATCH 3/4] net: sfp: error handling for phy probe
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 26 +++++++++++++++++---------
- 1 file changed, 17 insertions(+), 9 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1426,7 +1426,7 @@ static void sfp_sm_phy_detach(struct sfp
- 	sfp->mod_phy = NULL;
- }
- 
--static void sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
-+static int sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
- {
- 	struct phy_device *phy;
- 	int err;
-@@ -1434,18 +1434,18 @@ static void sfp_sm_probe_phy(struct sfp
- 	phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
- 	if (phy == ERR_PTR(-ENODEV)) {
- 		dev_info(sfp->dev, "no PHY detected\n");
--		return;
-+		return 0;
- 	}
- 	if (IS_ERR(phy)) {
- 		dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
--		return;
-+		return PTR_ERR(phy);
- 	}
- 
- 	err = phy_device_register(phy);
- 	if (err) {
- 		phy_device_free(phy);
- 		dev_err(sfp->dev, "phy_device_register failed: %d\n", err);
--		return;
-+		return err;
- 	}
- 
- 	err = sfp_add_phy(sfp->sfp_bus, phy);
-@@ -1453,10 +1453,12 @@ static void sfp_sm_probe_phy(struct sfp
- 		phy_device_remove(phy);
- 		phy_device_free(phy);
- 		dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err);
--		return;
-+		return err;
- 	}
- 
- 	sfp->mod_phy = phy;
-+
-+	return 0;
- }
- 
- static void sfp_sm_link_up(struct sfp *sfp)
-@@ -1529,21 +1531,24 @@ static void sfp_sm_fault(struct sfp *sfp
-  * Clause 45 copper SFP+ modules (10G) appear to switch their interface
-  * mode according to the negotiated line speed.
-  */
--static void sfp_sm_probe_for_phy(struct sfp *sfp)
-+static int sfp_sm_probe_for_phy(struct sfp *sfp)
- {
-+	int err = 0;
-+
- 	switch (sfp->id.base.extended_cc) {
- 	case SFF8024_ECC_10GBASE_T_SFI:
- 	case SFF8024_ECC_10GBASE_T_SR:
- 	case SFF8024_ECC_5GBASE_T:
- 	case SFF8024_ECC_2_5GBASE_T:
--		sfp_sm_probe_phy(sfp, true);
-+		err = sfp_sm_probe_phy(sfp, true);
- 		break;
- 
- 	default:
- 		if (sfp->id.base.e1000_base_t)
--			sfp_sm_probe_phy(sfp, false);
-+			err = sfp_sm_probe_phy(sfp, false);
- 		break;
- 	}
-+	return err;
- }
- 
- static int sfp_module_parse_power(struct sfp *sfp)
-@@ -2025,7 +2030,10 @@ static void sfp_sm_main(struct sfp *sfp,
- 	init_done:	/* TX_FAULT deasserted or we timed out with TX_FAULT
- 			 * clear.  Probe for the PHY and check the LOS state.
- 			 */
--			sfp_sm_probe_for_phy(sfp);
-+			if (sfp_sm_probe_for_phy(sfp)) {
-+				sfp_sm_next(sfp, SFP_S_FAIL, 0);
-+				break;
-+			}
- 			if (sfp_module_start(sfp->sfp_bus)) {
- 				sfp_sm_next(sfp, SFP_S_FAIL, 0);
- 				break;
diff --git a/target/linux/generic/pending-5.4/759-net-sfp-re-attempt-probing-for-phy.patch b/target/linux/generic/pending-5.4/759-net-sfp-re-attempt-probing-for-phy.patch
deleted file mode 100644
index aebb6b0398..0000000000
--- a/target/linux/generic/pending-5.4/759-net-sfp-re-attempt-probing-for-phy.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-From 6c4efe83a0acf6f06c89ae17b885fa5739eb5be7 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Mon, 2 Dec 2019 18:20:22 +0000
-Subject: [PATCH 4/4] net: sfp: re-attempt probing for phy
-
-Some 1000BASE-T PHY modules take a while for the PHY to wake up.
-Retry the probe a number of times before deciding that the module has
-no PHY.
-
-Tested with:
- Sourcephotonics SPGBTXCNFC - PHY takes less than 50ms to respond.
- Champion One 1000SFPT - PHY takes about 200ms to respond.
- Mikrotik S-RJ01 - no PHY
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 59 ++++++++++++++++++++++++++++++++++++---------------
- 1 file changed, 42 insertions(+), 17 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -62,6 +62,7 @@ enum {
- 	SFP_S_FAIL,
- 	SFP_S_WAIT,
- 	SFP_S_INIT,
-+	SFP_S_INIT_PHY,
- 	SFP_S_INIT_TX_FAULT,
- 	SFP_S_WAIT_LOS,
- 	SFP_S_LINK_UP,
-@@ -126,6 +127,7 @@ static const char * const sm_state_strin
- 	[SFP_S_FAIL] = "fail",
- 	[SFP_S_WAIT] = "wait",
- 	[SFP_S_INIT] = "init",
-+	[SFP_S_INIT_PHY] = "init_phy",
- 	[SFP_S_INIT_TX_FAULT] = "init_tx_fault",
- 	[SFP_S_WAIT_LOS] = "wait_los",
- 	[SFP_S_LINK_UP] = "link_up",
-@@ -180,6 +182,12 @@ static const enum gpiod_flags gpio_flags
- #define N_FAULT_INIT		5
- #define N_FAULT			5
- 
-+/* T_PHY_RETRY is the time interval between attempts to probe the PHY.
-+ * R_PHY_RETRY is the number of attempts.
-+ */
-+#define T_PHY_RETRY		msecs_to_jiffies(50)
-+#define R_PHY_RETRY		12
-+
- /* SFP module presence detection is poor: the three MOD DEF signals are
-  * the same length on the PCB, which means it's possible for MOD DEF 0 to
-  * connect before the I2C bus on MOD DEF 1/2.
-@@ -236,6 +244,7 @@ struct sfp {
- 	unsigned char sm_dev_state;
- 	unsigned short sm_state;
- 	unsigned char sm_fault_retries;
-+	unsigned char sm_phy_retries;
- 
- 	struct sfp_eeprom_id id;
- 	unsigned int module_power_mW;
-@@ -1432,10 +1441,8 @@ static int sfp_sm_probe_phy(struct sfp *
- 	int err;
- 
- 	phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
--	if (phy == ERR_PTR(-ENODEV)) {
--		dev_info(sfp->dev, "no PHY detected\n");
--		return 0;
--	}
-+	if (phy == ERR_PTR(-ENODEV))
-+		return PTR_ERR(phy);
- 	if (IS_ERR(phy)) {
- 		dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
- 		return PTR_ERR(phy);
-@@ -1954,6 +1961,7 @@ static void sfp_sm_module(struct sfp *sf
- static void sfp_sm_main(struct sfp *sfp, unsigned int event)
- {
- 	unsigned long timeout;
-+	int ret;
- 
- 	/* Some events are global */
- 	if (sfp->sm_state != SFP_S_DOWN &&
-@@ -2027,22 +2035,39 @@ static void sfp_sm_main(struct sfp *sfp,
- 			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
- 				     sfp->sm_fault_retries == N_FAULT_INIT);
- 		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
--	init_done:	/* TX_FAULT deasserted or we timed out with TX_FAULT
--			 * clear.  Probe for the PHY and check the LOS state.
--			 */
--			if (sfp_sm_probe_for_phy(sfp)) {
--				sfp_sm_next(sfp, SFP_S_FAIL, 0);
--				break;
--			}
--			if (sfp_module_start(sfp->sfp_bus)) {
--				sfp_sm_next(sfp, SFP_S_FAIL, 0);
-+	init_done:
-+			sfp->sm_phy_retries = R_PHY_RETRY;
-+			goto phy_probe;
-+		}
-+		break;
-+
-+	case SFP_S_INIT_PHY:
-+		if (event != SFP_E_TIMEOUT)
-+			break;
-+	phy_probe:
-+		/* TX_FAULT deasserted or we timed out with TX_FAULT
-+		 * clear.  Probe for the PHY and check the LOS state.
-+		 */
-+		ret = sfp_sm_probe_for_phy(sfp);
-+		if (ret == -ENODEV) {
-+			if (--sfp->sm_phy_retries) {
-+				sfp_sm_next(sfp, SFP_S_INIT_PHY, T_PHY_RETRY);
- 				break;
-+			} else {
-+				dev_info(sfp->dev, "no PHY detected\n");
- 			}
--			sfp_sm_link_check_los(sfp);
--
--			/* Reset the fault retry count */
--			sfp->sm_fault_retries = N_FAULT;
-+		} else if (ret) {
-+			sfp_sm_next(sfp, SFP_S_FAIL, 0);
-+			break;
- 		}
-+		if (sfp_module_start(sfp->sfp_bus)) {
-+			sfp_sm_next(sfp, SFP_S_FAIL, 0);
-+			break;
-+		}
-+		sfp_sm_link_check_los(sfp);
-+
-+		/* Reset the fault retry count */
-+		sfp->sm_fault_retries = N_FAULT;
- 		break;
- 
- 	case SFP_S_INIT_TX_FAULT:
diff --git a/target/linux/generic/pending-5.4/760-net-dsa-mv88e6xxx-fix-vlan-setup.patch b/target/linux/generic/pending-5.4/760-net-dsa-mv88e6xxx-fix-vlan-setup.patch
deleted file mode 100644
index a49b48f744..0000000000
--- a/target/linux/generic/pending-5.4/760-net-dsa-mv88e6xxx-fix-vlan-setup.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From a1b291f3f6c80a6c5ccad7283fc472d77a2a4763 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sun, 22 Dec 2019 12:40:11 +0000
-Subject: [PATCH] net: dsa: mv88e6xxx: fix vlan setup
-
-Provide an option that drivers can set to indicate they want to receive
-vlan configuration even when vlan filtering is disabled. This is safe
-for Marvell DSA bridges, which do not look up ingress traffic in the
-VTU if the port is in 8021Q disabled state. Whether this change is
-suitable for all DSA bridges is not known.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
----
- drivers/net/dsa/mv88e6xxx/chip.c |  1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -2663,6 +2663,7 @@ static int mv88e6xxx_setup(struct dsa_sw
- 
- 	chip->ds = ds;
- 	ds->slave_mii_bus = mv88e6xxx_default_mdio_bus(chip);
-+	ds->configure_vlan_while_not_filtering = true;
- 
- 	mv88e6xxx_reg_lock(chip);
- 
diff --git a/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch b/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch
deleted file mode 100644
index c2dc35d134..0000000000
--- a/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From 9cfb2d426c38272f245e9e6f62b3552d1ed5852b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
-Date: Tue, 21 Apr 2020 00:18:08 +0200
-Subject: [PATCH] net: dsa: mt7530: Support EEE features
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: René van Dorst <opensource@vdorst.com>
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1407,9 +1407,13 @@ static void mt7530_phylink_mac_config(st
- 	switch (state->speed) {
- 	case SPEED_1000:
- 		mcr_new |= PMCR_FORCE_SPEED_1000;
-+		if (priv->eee_enable & BIT(port))
-+			mcr_new |= PMCR_FORCE_EEE1G;
- 		break;
- 	case SPEED_100:
- 		mcr_new |= PMCR_FORCE_SPEED_100;
-+		if (priv->eee_enable & BIT(port))
-+			mcr_new |= PMCR_FORCE_EEE100;
- 		break;
- 	}
- 	if (state->duplex == DUPLEX_FULL) {
-@@ -1545,6 +1549,54 @@ mt7530_phylink_mac_link_state(struct dsa
- 	return 1;
- }
- 
-+static int mt7530_get_mac_eee(struct dsa_switch *ds, int port,
-+			      struct ethtool_eee *e)
-+{
-+	struct mt7530_priv *priv = ds->priv;
-+	u32 eeecr, pmsr;
-+
-+	e->eee_enabled = !!(priv->eee_enable & BIT(port));
-+
-+	if (e->eee_enabled) {
-+		eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
-+		e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN);
-+		e->tx_lpi_timer   = (eeecr >> 4) & 0xFFF;
-+		pmsr = mt7530_read(priv, MT7530_PMSR_P(port));
-+		e->eee_active  = e->eee_enabled && !!(pmsr & PMSR_EEE1G);
-+	} else {
-+		e->tx_lpi_enabled = 0;
-+		e->tx_lpi_timer = 0;
-+		e->eee_active = 0;
-+	}
-+
-+	return 0;
-+}
-+
-+static int mt7530_set_mac_eee(struct dsa_switch *ds, int port,
-+			      struct ethtool_eee *e)
-+{
-+	struct mt7530_priv *priv = ds->priv;
-+	u32 eeecr;
-+
-+	if (e->tx_lpi_enabled && e->tx_lpi_timer > 0xFFF)
-+		return -EINVAL;
-+
-+	if (e->eee_enabled) {
-+		priv->eee_enable |= BIT(port);
-+		//MT7530_PMEEECR_P
-+		eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
-+		eeecr &= 0xFFFF0000;
-+		if (!e->tx_lpi_enabled)
-+			eeecr |= LPI_MODE_EN;
-+		eeecr |= LPI_THRESH(e->tx_lpi_timer);
-+		mt7530_write(priv, MT7530_PMEEECR_P(port), eeecr);
-+	} else {
-+		priv->eee_enable &= ~(BIT(port));
-+	}
-+
-+	return 0;
-+}
-+
- static const struct dsa_switch_ops mt7530_switch_ops = {
- 	.get_tag_protocol	= mtk_get_tag_protocol,
- 	.setup			= mt7530_setup,
-@@ -1572,6 +1624,8 @@ static const struct dsa_switch_ops mt753
- 	.phylink_mac_config	= mt7530_phylink_mac_config,
- 	.phylink_mac_link_down	= mt7530_phylink_mac_link_down,
- 	.phylink_mac_link_up	= mt7530_phylink_mac_link_up,
-+	.get_mac_eee		= mt7530_get_mac_eee,
-+	.set_mac_eee		= mt7530_set_mac_eee,
- };
- 
- static const struct of_device_id mt7530_of_match[] = {
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -212,6 +212,8 @@ enum mt7530_vlan_port_attr {
- #define  PMCR_RX_EN			BIT(13)
- #define  PMCR_BACKOFF_EN		BIT(9)
- #define  PMCR_BACKPR_EN			BIT(8)
-+#define  PMCR_FORCE_EEE1G		BIT(7)
-+#define  PMCR_FORCE_EEE100		BIT(6)
- #define  PMCR_TX_FC_EN			BIT(5)
- #define  PMCR_RX_FC_EN			BIT(4)
- #define  PMCR_FORCE_SPEED_1000		BIT(3)
-@@ -233,6 +235,12 @@ enum mt7530_vlan_port_attr {
- #define  PMSR_DPX			BIT(1)
- #define  PMSR_LINK			BIT(0)
- 
-+#define MT7530_PMEEECR_P(x)		(0x3004 + (x) * 0x100)
-+#define  WAKEUP_TIME_1000(x)		((x & 0xFF) << 24)
-+#define  WAKEUP_TIME_100(x)		((x & 0xFF) << 16)
-+#define  LPI_THRESH(x)			((x & 0xFFF) << 4)
-+#define  LPI_MODE_EN			BIT(0)
-+
- /* Register for MIB */
- #define MT7530_PORT_MIB_COUNTER(x)	(0x4000 + (x) * 0x100)
- #define MT7530_MIB_CCR			0x4fe0
-@@ -471,6 +479,7 @@ struct mt7530_priv {
- 	unsigned int		p5_intf_sel;
- 	u8			mirror_rx;
- 	u8			mirror_tx;
-+	u8			eee_enable;
- 
- 	struct mt7530_port	ports[MT7530_NUM_PORTS];
- 	/* protect among processes for registers access*/
diff --git a/target/linux/generic/pending-5.4/762-net-bridge-switchdev-Refactor-br_switchdev_fdb_notif.patch b/target/linux/generic/pending-5.4/762-net-bridge-switchdev-Refactor-br_switchdev_fdb_notif.patch
deleted file mode 100644
index bfa2d375e1..0000000000
--- a/target/linux/generic/pending-5.4/762-net-bridge-switchdev-Refactor-br_switchdev_fdb_notif.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 46fe6cecb296d850c1ee2b333e57093ac4b733f3 Mon Sep 17 00:00:00 2001
-From: Tobias Waldekranz <tobias@waldekranz.com>
-Date: Sat, 16 Jan 2021 02:25:09 +0100
-Subject: [PATCH] net: bridge: switchdev: Refactor br_switchdev_fdb_notify
-
-Instead of having to add more and more arguments to
-br_switchdev_fdb_call_notifiers, get rid of it and build the info
-struct directly in br_switchdev_fdb_notify.
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
----
- net/bridge/br_switchdev.c | 37 +++++++++++--------------------------
- 1 file changed, 11 insertions(+), 26 deletions(-)
-
---- a/net/bridge/br_switchdev.c
-+++ b/net/bridge/br_switchdev.c
-@@ -102,42 +102,27 @@ int br_switchdev_set_port_flag(struct ne
- 	return 0;
- }
- 
--static void
--br_switchdev_fdb_call_notifiers(bool adding, const unsigned char *mac,
--				u16 vid, struct net_device *dev,
--				bool added_by_user, bool offloaded)
--{
--	struct switchdev_notifier_fdb_info info;
--	unsigned long notifier_type;
--
--	info.addr = mac;
--	info.vid = vid;
--	info.added_by_user = added_by_user;
--	info.offloaded = offloaded;
--	notifier_type = adding ? SWITCHDEV_FDB_ADD_TO_DEVICE : SWITCHDEV_FDB_DEL_TO_DEVICE;
--	call_switchdev_notifiers(notifier_type, dev, &info.info, NULL);
--}
--
- void
- br_switchdev_fdb_notify(const struct net_bridge_fdb_entry *fdb, int type)
- {
-+	struct switchdev_notifier_fdb_info info = {
-+		.addr = fdb->key.addr.addr,
-+		.vid = fdb->key.vlan_id,
-+		.added_by_user = fdb->added_by_user,
-+		.offloaded = fdb->offloaded,
-+	};
-+
- 	if (!fdb->dst)
- 		return;
- 
- 	switch (type) {
- 	case RTM_DELNEIGH:
--		br_switchdev_fdb_call_notifiers(false, fdb->key.addr.addr,
--						fdb->key.vlan_id,
--						fdb->dst->dev,
--						fdb->added_by_user,
--						fdb->offloaded);
-+		call_switchdev_notifiers(SWITCHDEV_FDB_DEL_TO_DEVICE,
-+					 fdb->dst->dev, &info.info, NULL);
- 		break;
- 	case RTM_NEWNEIGH:
--		br_switchdev_fdb_call_notifiers(true, fdb->key.addr.addr,
--						fdb->key.vlan_id,
--						fdb->dst->dev,
--						fdb->added_by_user,
--						fdb->offloaded);
-+		call_switchdev_notifiers(SWITCHDEV_FDB_ADD_TO_DEVICE,
-+					 fdb->dst->dev, &info.info, NULL);
- 		break;
- 	}
- }
diff --git a/target/linux/generic/pending-5.4/763-net-bridge-switchdev-Include-local-flag-in-FDB-notif.patch b/target/linux/generic/pending-5.4/763-net-bridge-switchdev-Include-local-flag-in-FDB-notif.patch
deleted file mode 100644
index 49d6f079ba..0000000000
--- a/target/linux/generic/pending-5.4/763-net-bridge-switchdev-Include-local-flag-in-FDB-notif.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From ec5be4f79026282925ae383caa431a8d41e3456a Mon Sep 17 00:00:00 2001
-From: Tobias Waldekranz <tobias@waldekranz.com>
-Date: Sat, 16 Jan 2021 02:25:10 +0100
-Subject: [PATCH] net: bridge: switchdev: Include local flag in FDB
- notifications
-
-Some switchdev drivers, notably DSA, ignore all dynamically learned
-address notifications (!added_by_user) as these are autonomously added
-by the switch. Previously, such a notification was indistinguishable
-from a local address notification. Include a local bit in the
-notification so that the two classes can be discriminated.
-
-This allows DSA-like devices to add local addresses to the hardware
-FDB (with the CPU as the destination), thereby avoiding flows towards
-the CPU being flooded by the switch as unknown unicast.
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
----
- include/net/switchdev.h   | 1 +
- net/bridge/br_switchdev.c | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/include/net/switchdev.h
-+++ b/include/net/switchdev.h
-@@ -124,6 +124,7 @@ struct switchdev_notifier_fdb_info {
- 	const unsigned char *addr;
- 	u16 vid;
- 	u8 added_by_user:1,
-+	   local:1,
- 	   offloaded:1;
- };
- 
---- a/net/bridge/br_switchdev.c
-+++ b/net/bridge/br_switchdev.c
-@@ -109,6 +109,7 @@ br_switchdev_fdb_notify(const struct net
- 		.addr = fdb->key.addr.addr,
- 		.vid = fdb->key.vlan_id,
- 		.added_by_user = fdb->added_by_user,
-+		.local = fdb->is_local,
- 		.offloaded = fdb->offloaded,
- 	};
- 
diff --git a/target/linux/generic/pending-5.4/764-net-bridge-switchdev-Send-FDB-notifications-for-host.patch b/target/linux/generic/pending-5.4/764-net-bridge-switchdev-Send-FDB-notifications-for-host.patch
deleted file mode 100644
index 8b869dd8f3..0000000000
--- a/target/linux/generic/pending-5.4/764-net-bridge-switchdev-Send-FDB-notifications-for-host.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 2e50fd9322047253c327550b4485cf8761035a8c Mon Sep 17 00:00:00 2001
-From: Tobias Waldekranz <tobias@waldekranz.com>
-Date: Sat, 16 Jan 2021 02:25:11 +0100
-Subject: [PATCH] net: bridge: switchdev: Send FDB notifications for host
- addresses
-
-Treat addresses added to the bridge itself in the same way as regular
-ports and send out a notification so that drivers may sync it down to
-the hardware FDB.
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
----
- net/bridge/br_fdb.c       |  4 ++--
- net/bridge/br_private.h   |  7 ++++---
- net/bridge/br_switchdev.c | 11 +++++------
- 3 files changed, 11 insertions(+), 11 deletions(-)
-
---- a/net/bridge/br_fdb.c
-+++ b/net/bridge/br_fdb.c
-@@ -581,7 +581,7 @@ void br_fdb_update(struct net_bridge *br
- 
- 			/* fastpath: update of existing entry */
- 			if (unlikely(source != fdb->dst && !fdb->is_sticky)) {
--				br_switchdev_fdb_notify(fdb, RTM_DELNEIGH);
-+				br_switchdev_fdb_notify(br, fdb, RTM_DELNEIGH);
- 				fdb->dst = source;
- 				fdb_modified = true;
- 				/* Take over HW learned entry */
-@@ -697,7 +697,7 @@ static void fdb_notify(struct net_bridge
- 	int err = -ENOBUFS;
- 
- 	if (swdev_notify)
--		br_switchdev_fdb_notify(fdb, type);
-+		br_switchdev_fdb_notify(br, fdb, type);
- 
- 	skb = nlmsg_new(fdb_nlmsg_size(), GFP_ATOMIC);
- 	if (skb == NULL)
---- a/net/bridge/br_private.h
-+++ b/net/bridge/br_private.h
-@@ -1203,8 +1203,8 @@ bool nbp_switchdev_allowed_egress(const
- int br_switchdev_set_port_flag(struct net_bridge_port *p,
- 			       unsigned long flags,
- 			       unsigned long mask);
--void br_switchdev_fdb_notify(const struct net_bridge_fdb_entry *fdb,
--			     int type);
-+void br_switchdev_fdb_notify(struct net_bridge *br,
-+			     const struct net_bridge_fdb_entry *fdb, int type);
- int br_switchdev_port_vlan_add(struct net_device *dev, u16 vid, u16 flags,
- 			       struct netlink_ext_ack *extack);
- int br_switchdev_port_vlan_del(struct net_device *dev, u16 vid);
-@@ -1250,7 +1250,8 @@ static inline int br_switchdev_port_vlan
- }
- 
- static inline void
--br_switchdev_fdb_notify(const struct net_bridge_fdb_entry *fdb, int type)
-+br_switchdev_fdb_notify(struct net_bridge *br,
-+			const struct net_bridge_fdb_entry *fdb, int type)
- {
- }
- 
---- a/net/bridge/br_switchdev.c
-+++ b/net/bridge/br_switchdev.c
-@@ -103,7 +103,8 @@ int br_switchdev_set_port_flag(struct ne
- }
- 
- void
--br_switchdev_fdb_notify(const struct net_bridge_fdb_entry *fdb, int type)
-+br_switchdev_fdb_notify(struct net_bridge *br,
-+			const struct net_bridge_fdb_entry *fdb, int type)
- {
- 	struct switchdev_notifier_fdb_info info = {
- 		.addr = fdb->key.addr.addr,
-@@ -112,18 +113,16 @@ br_switchdev_fdb_notify(const struct net
- 		.local = fdb->is_local,
- 		.offloaded = fdb->offloaded,
- 	};
--
--	if (!fdb->dst)
--		return;
-+	struct net_device *dev = fdb->dst ? fdb->dst->dev : br->dev;
- 
- 	switch (type) {
- 	case RTM_DELNEIGH:
- 		call_switchdev_notifiers(SWITCHDEV_FDB_DEL_TO_DEVICE,
--					 fdb->dst->dev, &info.info, NULL);
-+					 dev, &info.info, NULL);
- 		break;
- 	case RTM_NEWNEIGH:
- 		call_switchdev_notifiers(SWITCHDEV_FDB_ADD_TO_DEVICE,
--					 fdb->dst->dev, &info.info, NULL);
-+					 dev, &info.info, NULL);
- 		break;
- 	}
- }
diff --git a/target/linux/generic/pending-5.4/765-net-dsa-Include-local-addresses-in-assisted-CPU-port.patch b/target/linux/generic/pending-5.4/765-net-dsa-Include-local-addresses-in-assisted-CPU-port.patch
deleted file mode 100644
index d951246260..0000000000
--- a/target/linux/generic/pending-5.4/765-net-dsa-Include-local-addresses-in-assisted-CPU-port.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From dd082716b43a3684b2f473ae5d1e76d1c076d86d Mon Sep 17 00:00:00 2001
-From: Tobias Waldekranz <tobias@waldekranz.com>
-Date: Sat, 16 Jan 2021 02:25:12 +0100
-Subject: [PATCH] net: dsa: Include local addresses in assisted CPU port
- learning
-
-Add local addresses (i.e. the ports' MAC addresses) to the hardware
-FDB when assisted CPU port learning is enabled.
-
-NOTE: The bridge's own MAC address is also "local". If that address is
-not shared with any port, the bridge's MAC is not be added by this
-functionality - but the following commit takes care of that case.
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
----
- net/dsa/slave.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -1698,10 +1698,12 @@ static int dsa_slave_switchdev_event(str
- 		fdb_info = ptr;
- 
- 		if (dsa_slave_dev_check(dev)) {
--			if (!fdb_info->added_by_user)
--				return NOTIFY_OK;
--
- 			dp = dsa_slave_to_port(dev);
-+
-+			if (fdb_info->local && dp->ds->assisted_learning_on_cpu_port)
-+				dp = dp->cpu_dp;
-+			else if (!fdb_info->added_by_user)
-+				return NOTIFY_OK;
- 		} else {
- 			/* Snoop addresses learnt on foreign interfaces
- 			 * bridged with us, for switches that don't
diff --git a/target/linux/generic/pending-5.4/766-net-dsa-Include-bridge-addresses-in-assisted-CPU-por.patch b/target/linux/generic/pending-5.4/766-net-dsa-Include-bridge-addresses-in-assisted-CPU-por.patch
deleted file mode 100644
index 46504aeeff..0000000000
--- a/target/linux/generic/pending-5.4/766-net-dsa-Include-bridge-addresses-in-assisted-CPU-por.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 0663ebde114a6fb2c28c622ba5212b302d4d2581 Mon Sep 17 00:00:00 2001
-From: Tobias Waldekranz <tobias@waldekranz.com>
-Date: Sat, 16 Jan 2021 02:25:13 +0100
-Subject: [PATCH] net: dsa: Include bridge addresses in assisted CPU port
- learning
-
-Now that notifications are sent out for addresses added to the bridge
-itself, extend DSA to include those addresses in the hardware FDB when
-assisted CPU port learning is enabled.
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
----
- net/dsa/slave.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -1712,7 +1712,11 @@ static int dsa_slave_switchdev_event(str
- 			struct net_device *br_dev;
- 			struct dsa_slave_priv *p;
- 
--			br_dev = netdev_master_upper_dev_get_rcu(dev);
-+			if (netif_is_bridge_master(dev))
-+				br_dev = dev;
-+			else
-+				br_dev = netdev_master_upper_dev_get_rcu(dev);
-+
- 			if (!br_dev)
- 				return NOTIFY_DONE;
- 
diff --git a/target/linux/generic/pending-5.4/767-net-dsa-Sync-static-FDB-entries-on-foreign-interface.patch b/target/linux/generic/pending-5.4/767-net-dsa-Sync-static-FDB-entries-on-foreign-interface.patch
deleted file mode 100644
index e626086bc1..0000000000
--- a/target/linux/generic/pending-5.4/767-net-dsa-Sync-static-FDB-entries-on-foreign-interface.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 81e39fd78db82fb51b05fff309b9c521f1a0bc5a Mon Sep 17 00:00:00 2001
-From: Tobias Waldekranz <tobias@waldekranz.com>
-Date: Sat, 16 Jan 2021 02:25:14 +0100
-Subject: [PATCH] net: dsa: Sync static FDB entries on foreign interfaces to
- hardware
-
-Reuse the "assisted_learning_on_cpu_port" functionality to always add
-entries for user-configured entries on foreign interfaces, even if
-assisted_learning_on_cpu_port is not enabled. E.g. in this situation:
-
-   br0
-   / \
-swp0 dummy0
-
-$ bridge fdb add 02:00:de:ad:00:01 dev dummy0 vlan 1 master
-
-Results in DSA adding an entry in the hardware FDB, pointing this
-address towards the CPU port.
-
-The same is true for entries added to the bridge itself, e.g:
-
-$ bridge fdb add 02:00:de:ad:00:01 dev br0 vlan 1 self
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
----
- net/dsa/slave.c | 12 ++++++++----
- 1 file changed, 8 insertions(+), 4 deletions(-)
-
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -1705,9 +1705,12 @@ static int dsa_slave_switchdev_event(str
- 			else if (!fdb_info->added_by_user)
- 				return NOTIFY_OK;
- 		} else {
--			/* Snoop addresses learnt on foreign interfaces
--			 * bridged with us, for switches that don't
--			 * automatically learn SA from CPU-injected traffic
-+			/* Snoop addresses added to foreign interfaces
-+			 * bridged with us, or the bridge
-+			 * itself. Dynamically learned addresses can
-+			 * also be added for switches that don't
-+			 * automatically learn SA from CPU-injected
-+			 * traffic.
- 			 */
- 			struct net_device *br_dev;
- 			struct dsa_slave_priv *p;
-@@ -1729,7 +1732,8 @@ static int dsa_slave_switchdev_event(str
- 
- 			dp = p->dp->cpu_dp;
- 
--			if (!dp->ds->assisted_learning_on_cpu_port)
-+			if (!fdb_info->added_by_user &&
-+			    !dp->ds->assisted_learning_on_cpu_port)
- 				return NOTIFY_DONE;
- 		}
- 
diff --git a/target/linux/generic/pending-5.4/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch b/target/linux/generic/pending-5.4/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch
deleted file mode 100644
index cb421f164b..0000000000
--- a/target/linux/generic/pending-5.4/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From:   Tobias Waldekranz <tobias@waldekranz.com>
-Subject: [RFC net-next 7/7] net: dsa: mv88e6xxx: Request assisted learning on CPU port
-Date:   Sat, 16 Jan 2021 02:25:15 +0100
-Archived-At: <https://lore.kernel.org/netdev/20210116012515.3152-8-tobias@waldekranz.com/>
-
-While the hardware is capable of performing learning on the CPU port,
-it requires alot of additions to the bridge's forwarding path in order
-to handle multi-destination traffic correctly.
-
-Until that is in place, opt for the next best thing and let DSA sync
-the relevant addresses down to the hardware FDB.
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
----
- drivers/net/dsa/mv88e6xxx/chip.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -5080,6 +5080,7 @@ static int mv88e6xxx_register_switch(str
- 	ds->ops = &mv88e6xxx_switch_ops;
- 	ds->ageing_time_min = chip->info->age_time_coeff;
- 	ds->ageing_time_max = chip->info->age_time_coeff * U8_MAX;
-+	ds->assisted_learning_on_cpu_port = true;
- 
- 	dev_set_drvdata(dev, ds);
- 
diff --git a/target/linux/generic/pending-5.4/770-00-net-ethernet-mtk_eth_soc-use-napi_consume_skb.patch b/target/linux/generic/pending-5.4/770-00-net-ethernet-mtk_eth_soc-use-napi_consume_skb.patch
deleted file mode 100644
index 2f0c7934f5..0000000000
--- a/target/linux/generic/pending-5.4/770-00-net-ethernet-mtk_eth_soc-use-napi_consume_skb.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 8 Jun 2020 17:01:12 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: use napi_consume_skb
-
-Should improve performance, since it can use bulk free
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -874,7 +874,8 @@ static int txd_to_idx(struct mtk_tx_ring
- 	return ((void *)dma - (void *)ring->dma) / sizeof(*dma);
- }
- 
--static void mtk_tx_unmap(struct mtk_eth *eth, struct mtk_tx_buf *tx_buf)
-+static void mtk_tx_unmap(struct mtk_eth *eth, struct mtk_tx_buf *tx_buf,
-+			 bool napi)
- {
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) {
- 		if (tx_buf->flags & MTK_TX_FLAGS_SINGLE0) {
-@@ -906,8 +907,12 @@ static void mtk_tx_unmap(struct mtk_eth
- 
- 	tx_buf->flags = 0;
- 	if (tx_buf->skb &&
--	    (tx_buf->skb != (struct sk_buff *)MTK_DMA_DUMMY_DESC))
--		dev_kfree_skb_any(tx_buf->skb);
-+	    (tx_buf->skb != (struct sk_buff *)MTK_DMA_DUMMY_DESC)) {
-+		if (napi)
-+			napi_consume_skb(tx_buf->skb, napi);
-+		else
-+			dev_kfree_skb_any(tx_buf->skb);
-+	}
- 	tx_buf->skb = NULL;
- }
- 
-@@ -1085,7 +1090,7 @@ err_dma:
- 		tx_buf = mtk_desc_to_tx_buf(ring, itxd);
- 
- 		/* unmap dma */
--		mtk_tx_unmap(eth, tx_buf);
-+		mtk_tx_unmap(eth, tx_buf, false);
- 
- 		itxd->txd3 = TX_DMA_LS0 | TX_DMA_OWNER_CPU;
- 		if (!MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA))
-@@ -1403,7 +1408,7 @@ static int mtk_poll_tx_qdma(struct mtk_e
- 			done[mac]++;
- 			budget--;
- 		}
--		mtk_tx_unmap(eth, tx_buf);
-+		mtk_tx_unmap(eth, tx_buf, true);
- 
- 		ring->last_free = desc;
- 		atomic_inc(&ring->free_count);
-@@ -1440,7 +1445,7 @@ static int mtk_poll_tx_pdma(struct mtk_e
- 			budget--;
- 		}
- 
--		mtk_tx_unmap(eth, tx_buf);
-+		mtk_tx_unmap(eth, tx_buf, true);
- 
- 		desc = &ring->dma[cpu];
- 		ring->last_free = desc;
-@@ -1642,7 +1647,7 @@ static void mtk_tx_clean(struct mtk_eth
- 
- 	if (ring->buf) {
- 		for (i = 0; i < MTK_DMA_SIZE; i++)
--			mtk_tx_unmap(eth, &ring->buf[i]);
-+			mtk_tx_unmap(eth, &ring->buf[i], false);
- 		kfree(ring->buf);
- 		ring->buf = NULL;
- 	}
diff --git a/target/linux/generic/pending-5.4/770-01-net-ethernet-mtk_eth_soc-significantly-reduce-mdio-b.patch b/target/linux/generic/pending-5.4/770-01-net-ethernet-mtk_eth_soc-significantly-reduce-mdio-b.patch
deleted file mode 100644
index 922c35a3e4..0000000000
--- a/target/linux/generic/pending-5.4/770-01-net-ethernet-mtk_eth_soc-significantly-reduce-mdio-b.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 8 Jun 2020 17:02:39 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: significantly reduce mdio bus
- access latency
-
-usleep_range often ends up sleeping much longer than the 10-20us provided
-as a range here. This causes significant latency in mdio bus acceses,
-which easily adds multiple seconds to the boot time on MT7621 when polling
-DSA slave ports.
-Use cond_resched instead of usleep_range, since the MDIO access does not
-take much time
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -85,7 +85,7 @@ static int mtk_mdio_busy_wait(struct mtk
- 			return 0;
- 		if (time_after(jiffies, t_start + PHY_IAC_TIMEOUT))
- 			break;
--		usleep_range(10, 20);
-+		cond_resched();
- 	}
- 
- 	dev_err(eth->dev, "mdio: MDIO timeout\n");
diff --git a/target/linux/generic/pending-5.4/770-03-net-ethernet-mtk_eth_soc-fix-unnecessary-tx-queue-st.patch b/target/linux/generic/pending-5.4/770-03-net-ethernet-mtk_eth_soc-fix-unnecessary-tx-queue-st.patch
deleted file mode 100644
index 6eeae6985f..0000000000
--- a/target/linux/generic/pending-5.4/770-03-net-ethernet-mtk_eth_soc-fix-unnecessary-tx-queue-st.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 26 Aug 2020 16:55:54 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: fix unnecessary tx queue
- stops
-
-When running short on descriptors, only stop the queue for the netdev that tx
-was attempted for. By the time the something tries to send on the other netdev,
-the ring might have some more room already
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1147,17 +1147,6 @@ static void mtk_wake_queue(struct mtk_et
- 	}
- }
- 
--static void mtk_stop_queue(struct mtk_eth *eth)
--{
--	int i;
--
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
--		if (!eth->netdev[i])
--			continue;
--		netif_stop_queue(eth->netdev[i]);
--	}
--}
--
- static int mtk_start_xmit(struct sk_buff *skb, struct net_device *dev)
- {
- 	struct mtk_mac *mac = netdev_priv(dev);
-@@ -1178,7 +1167,7 @@ static int mtk_start_xmit(struct sk_buff
- 
- 	tx_num = mtk_cal_txd_req(skb);
- 	if (unlikely(atomic_read(&ring->free_count) <= tx_num)) {
--		mtk_stop_queue(eth);
-+		netif_stop_queue(dev);
- 		netif_err(eth, tx_queued, dev,
- 			  "Tx Ring full when queue awake!\n");
- 		spin_unlock(&eth->page_lock);
-@@ -1204,7 +1193,7 @@ static int mtk_start_xmit(struct sk_buff
- 		goto drop;
- 
- 	if (unlikely(atomic_read(&ring->free_count) <= ring->thresh))
--		mtk_stop_queue(eth);
-+		netif_stop_queue(dev);
- 
- 	spin_unlock(&eth->page_lock);
- 
diff --git a/target/linux/generic/pending-5.4/770-04-net-ethernet-mtk_eth_soc-use-larger-burst-size-for-q.patch b/target/linux/generic/pending-5.4/770-04-net-ethernet-mtk_eth_soc-use-larger-burst-size-for-q.patch
deleted file mode 100644
index cd042ce409..0000000000
--- a/target/linux/generic/pending-5.4/770-04-net-ethernet-mtk_eth_soc-use-larger-burst-size-for-q.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 26 Aug 2020 16:58:55 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: use larger burst size for
- qdma tx
-
-Improves tx performance
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2208,7 +2208,7 @@ static int mtk_start_dma(struct mtk_eth
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) {
- 		mtk_w32(eth,
- 			MTK_TX_WB_DDONE | MTK_TX_DMA_EN |
--			MTK_DMA_SIZE_16DWORDS | MTK_NDP_CO_PRO |
-+			MTK_TX_BT_32DWORDS | MTK_NDP_CO_PRO |
- 			MTK_RX_DMA_EN | MTK_RX_2B_OFFSET |
- 			MTK_RX_BT_32DWORDS,
- 			MTK_QDMA_GLO_CFG);
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -197,7 +197,7 @@
- #define MTK_RX_BT_32DWORDS	(3 << 11)
- #define MTK_NDP_CO_PRO		BIT(10)
- #define MTK_TX_WB_DDONE		BIT(6)
--#define MTK_DMA_SIZE_16DWORDS	(2 << 4)
-+#define MTK_TX_BT_32DWORDS	(3 << 4)
- #define MTK_RX_DMA_BUSY		BIT(3)
- #define MTK_TX_DMA_BUSY		BIT(1)
- #define MTK_RX_DMA_EN		BIT(2)
diff --git a/target/linux/generic/pending-5.4/770-05-net-ethernet-mtk_eth_soc-increase-DMA-ring-sizes.patch b/target/linux/generic/pending-5.4/770-05-net-ethernet-mtk_eth_soc-increase-DMA-ring-sizes.patch
deleted file mode 100644
index f68cbc333c..0000000000
--- a/target/linux/generic/pending-5.4/770-05-net-ethernet-mtk_eth_soc-increase-DMA-ring-sizes.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 26 Aug 2020 16:59:41 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: increase DMA ring sizes
-
-256 descriptors is not enough for multi-gigabit traffic under load on MT7622.
-Bump it to 512 to improve performance
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -19,7 +19,7 @@
- #define MTK_QDMA_PAGE_SIZE	2048
- #define	MTK_MAX_RX_LENGTH	1536
- #define MTK_TX_DMA_BUF_LEN	0x3fff
--#define MTK_DMA_SIZE		256
-+#define MTK_DMA_SIZE		512
- #define MTK_NAPI_WEIGHT		64
- #define MTK_MAC_COUNT		2
- #define MTK_RX_ETH_HLEN		(VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN)
diff --git a/target/linux/generic/pending-5.4/770-06-net-ethernet-mtk_eth_soc-implement-dynamic-interrupt.patch b/target/linux/generic/pending-5.4/770-06-net-ethernet-mtk_eth_soc-implement-dynamic-interrupt.patch
deleted file mode 100644
index 58128445b2..0000000000
--- a/target/linux/generic/pending-5.4/770-06-net-ethernet-mtk_eth_soc-implement-dynamic-interrupt.patch
+++ /dev/null
@@ -1,281 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 26 Aug 2020 17:02:30 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: implement dynamic interrupt
- moderation
-
-Reduces the number of interrupts under load
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/Kconfig
-+++ b/drivers/net/ethernet/mediatek/Kconfig
-@@ -10,6 +10,7 @@ if NET_VENDOR_MEDIATEK
- config NET_MEDIATEK_SOC
- 	tristate "MediaTek SoC Gigabit Ethernet support"
- 	select PHYLINK
-+	select DIMLIB
- 	---help---
- 	  This driver supports the gigabit ethernet MACs in the
- 	  MediaTek SoC family.
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1249,12 +1249,13 @@ static void mtk_update_rx_cpu_idx(struct
- static int mtk_poll_rx(struct napi_struct *napi, int budget,
- 		       struct mtk_eth *eth)
- {
-+	struct dim_sample dim_sample = {};
- 	struct mtk_rx_ring *ring;
- 	int idx;
- 	struct sk_buff *skb;
- 	u8 *data, *new_data;
- 	struct mtk_rx_dma *rxd, trxd;
--	int done = 0;
-+	int done = 0, bytes = 0;
- 
- 	while (done < budget) {
- 		struct net_device *netdev;
-@@ -1328,6 +1329,7 @@ static int mtk_poll_rx(struct napi_struc
- 		else
- 			skb_checksum_none_assert(skb);
- 		skb->protocol = eth_type_trans(skb, netdev);
-+		bytes += pktlen;
- 
- 		if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX &&
- 		    (trxd.rxd2 & RX_DMA_VTAG))
-@@ -1359,6 +1361,12 @@ rx_done:
- 		mtk_update_rx_cpu_idx(eth);
- 	}
- 
-+	eth->rx_packets += done;
-+	eth->rx_bytes += bytes;
-+	dim_update_sample(eth->rx_events, eth->rx_packets, eth->rx_bytes,
-+			  &dim_sample);
-+	net_dim(&eth->rx_dim, dim_sample);
-+
- 	return done;
- }
- 
-@@ -1451,6 +1459,7 @@ static int mtk_poll_tx_pdma(struct mtk_e
- static int mtk_poll_tx(struct mtk_eth *eth, int budget)
- {
- 	struct mtk_tx_ring *ring = &eth->tx_ring;
-+	struct dim_sample dim_sample = {};
- 	unsigned int done[MTK_MAX_DEVS];
- 	unsigned int bytes[MTK_MAX_DEVS];
- 	int total = 0, i;
-@@ -1468,8 +1477,14 @@ static int mtk_poll_tx(struct mtk_eth *e
- 			continue;
- 		netdev_completed_queue(eth->netdev[i], done[i], bytes[i]);
- 		total += done[i];
-+		eth->tx_packets += done[i];
-+		eth->tx_bytes += bytes[i];
- 	}
- 
-+	dim_update_sample(eth->tx_events, eth->tx_packets, eth->tx_bytes,
-+			  &dim_sample);
-+	net_dim(&eth->tx_dim, dim_sample);
-+
- 	if (mtk_queue_stopped(eth) &&
- 	    (atomic_read(&ring->free_count) > ring->thresh))
- 		mtk_wake_queue(eth);
-@@ -2144,6 +2159,7 @@ static irqreturn_t mtk_handle_irq_rx(int
- {
- 	struct mtk_eth *eth = _eth;
- 
-+	eth->rx_events++;
- 	if (likely(napi_schedule_prep(&eth->rx_napi))) {
- 		__napi_schedule(&eth->rx_napi);
- 		mtk_rx_irq_disable(eth, MTK_RX_DONE_INT);
-@@ -2156,6 +2172,7 @@ static irqreturn_t mtk_handle_irq_tx(int
- {
- 	struct mtk_eth *eth = _eth;
- 
-+	eth->tx_events++;
- 	if (likely(napi_schedule_prep(&eth->tx_napi))) {
- 		__napi_schedule(&eth->tx_napi);
- 		mtk_tx_irq_disable(eth, MTK_TX_DONE_INT);
-@@ -2332,6 +2349,9 @@ static int mtk_stop(struct net_device *d
- 	napi_disable(&eth->tx_napi);
- 	napi_disable(&eth->rx_napi);
- 
-+	cancel_work_sync(&eth->rx_dim.work);
-+	cancel_work_sync(&eth->tx_dim.work);
-+
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA))
- 		mtk_stop_dma(eth, MTK_QDMA_GLO_CFG);
- 	mtk_stop_dma(eth, MTK_PDMA_GLO_CFG);
-@@ -2381,6 +2401,64 @@ err_disable_clks:
- 	return ret;
- }
- 
-+static void mtk_dim_rx(struct work_struct *work)
-+{
-+	struct dim *dim = container_of(work, struct dim, work);
-+	struct mtk_eth *eth = container_of(dim, struct mtk_eth, rx_dim);
-+	struct dim_cq_moder cur_profile;
-+	u32 val, cur;
-+
-+	cur_profile = net_dim_get_rx_moderation(eth->rx_dim.mode,
-+						dim->profile_ix);
-+	spin_lock_bh(&eth->dim_lock);
-+
-+	val = mtk_r32(eth, MTK_PDMA_DELAY_INT);
-+	val &= MTK_PDMA_DELAY_TX_MASK;
-+	val |= MTK_PDMA_DELAY_RX_EN;
-+
-+	cur = min_t(u32, DIV_ROUND_UP(cur_profile.usec, 20), MTK_PDMA_DELAY_PTIME_MASK);
-+	val |= cur << MTK_PDMA_DELAY_RX_PTIME_SHIFT;
-+
-+	cur = min_t(u32, cur_profile.pkts, MTK_PDMA_DELAY_PINT_MASK);
-+	val |= cur << MTK_PDMA_DELAY_RX_PINT_SHIFT;
-+
-+	mtk_w32(eth, val, MTK_PDMA_DELAY_INT);
-+	mtk_w32(eth, val, MTK_QDMA_DELAY_INT);
-+
-+	spin_unlock_bh(&eth->dim_lock);
-+
-+	dim->state = DIM_START_MEASURE;
-+}
-+
-+static void mtk_dim_tx(struct work_struct *work)
-+{
-+	struct dim *dim = container_of(work, struct dim, work);
-+	struct mtk_eth *eth = container_of(dim, struct mtk_eth, tx_dim);
-+	struct dim_cq_moder cur_profile;
-+	u32 val, cur;
-+
-+	cur_profile = net_dim_get_tx_moderation(eth->tx_dim.mode,
-+						dim->profile_ix);
-+	spin_lock_bh(&eth->dim_lock);
-+
-+	val = mtk_r32(eth, MTK_PDMA_DELAY_INT);
-+	val &= MTK_PDMA_DELAY_RX_MASK;
-+	val |= MTK_PDMA_DELAY_TX_EN;
-+
-+	cur = min_t(u32, DIV_ROUND_UP(cur_profile.usec, 20), MTK_PDMA_DELAY_PTIME_MASK);
-+	val |= cur << MTK_PDMA_DELAY_TX_PTIME_SHIFT;
-+
-+	cur = min_t(u32, cur_profile.pkts, MTK_PDMA_DELAY_PINT_MASK);
-+	val |= cur << MTK_PDMA_DELAY_TX_PINT_SHIFT;
-+
-+	mtk_w32(eth, val, MTK_PDMA_DELAY_INT);
-+	mtk_w32(eth, val, MTK_QDMA_DELAY_INT);
-+
-+	spin_unlock_bh(&eth->dim_lock);
-+
-+	dim->state = DIM_START_MEASURE;
-+}
-+
- static int mtk_hw_init(struct mtk_eth *eth)
- {
- 	int i, val, ret;
-@@ -2402,9 +2480,6 @@ static int mtk_hw_init(struct mtk_eth *e
- 			goto err_disable_pm;
- 		}
- 
--		/* enable interrupt delay for RX */
--		mtk_w32(eth, MTK_PDMA_DELAY_RX_DELAY, MTK_PDMA_DELAY_INT);
--
- 		/* disable delay and normal interrupt */
- 		mtk_tx_irq_disable(eth, ~0);
- 		mtk_rx_irq_disable(eth, ~0);
-@@ -2443,11 +2518,10 @@ static int mtk_hw_init(struct mtk_eth *e
- 	/* Enable RX VLan Offloading */
- 	mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
- 
--	/* enable interrupt delay for RX */
--	mtk_w32(eth, MTK_PDMA_DELAY_RX_DELAY, MTK_PDMA_DELAY_INT);
-+	mtk_dim_rx(&eth->rx_dim.work);
-+	mtk_dim_tx(&eth->tx_dim.work);
- 
- 	/* disable delay and normal interrupt */
--	mtk_w32(eth, 0, MTK_QDMA_DELAY_INT);
- 	mtk_tx_irq_disable(eth, ~0);
- 	mtk_rx_irq_disable(eth, ~0);
- 
-@@ -2948,6 +3022,13 @@ static int mtk_probe(struct platform_dev
- 	spin_lock_init(&eth->page_lock);
- 	spin_lock_init(&eth->tx_irq_lock);
- 	spin_lock_init(&eth->rx_irq_lock);
-+	spin_lock_init(&eth->dim_lock);
-+
-+	eth->rx_dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE;
-+	INIT_WORK(&eth->rx_dim.work, mtk_dim_rx);
-+
-+	eth->tx_dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE;
-+	INIT_WORK(&eth->tx_dim.work, mtk_dim_tx);
- 
- 	if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) {
- 		eth->ethsys = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -15,6 +15,7 @@
- #include <linux/u64_stats_sync.h>
- #include <linux/refcount.h>
- #include <linux/phylink.h>
-+#include <linux/dim.h>
- 
- #define MTK_QDMA_PAGE_SIZE	2048
- #define	MTK_MAX_RX_LENGTH	1536
-@@ -131,13 +132,18 @@
- 
- /* PDMA Delay Interrupt Register */
- #define MTK_PDMA_DELAY_INT		0xa0c
-+#define MTK_PDMA_DELAY_RX_MASK		GENMASK(15, 0)
- #define MTK_PDMA_DELAY_RX_EN		BIT(15)
--#define MTK_PDMA_DELAY_RX_PINT		4
- #define MTK_PDMA_DELAY_RX_PINT_SHIFT	8
--#define MTK_PDMA_DELAY_RX_PTIME		4
--#define MTK_PDMA_DELAY_RX_DELAY		\
--	(MTK_PDMA_DELAY_RX_EN | MTK_PDMA_DELAY_RX_PTIME | \
--	(MTK_PDMA_DELAY_RX_PINT << MTK_PDMA_DELAY_RX_PINT_SHIFT))
-+#define MTK_PDMA_DELAY_RX_PTIME_SHIFT	0
-+
-+#define MTK_PDMA_DELAY_TX_MASK		GENMASK(31, 16)
-+#define MTK_PDMA_DELAY_TX_EN		BIT(31)
-+#define MTK_PDMA_DELAY_TX_PINT_SHIFT	24
-+#define MTK_PDMA_DELAY_TX_PTIME_SHIFT	16
-+
-+#define MTK_PDMA_DELAY_PINT_MASK	0x7f
-+#define MTK_PDMA_DELAY_PTIME_MASK	0xff
- 
- /* PDMA Interrupt Status Register */
- #define MTK_PDMA_INT_STATUS	0xa20
-@@ -219,6 +225,7 @@
- /* QDMA Interrupt Status Register */
- #define MTK_QDMA_INT_STATUS	0x1A18
- #define MTK_RX_DONE_DLY		BIT(30)
-+#define MTK_TX_DONE_DLY		BIT(28)
- #define MTK_RX_DONE_INT3	BIT(19)
- #define MTK_RX_DONE_INT2	BIT(18)
- #define MTK_RX_DONE_INT1	BIT(17)
-@@ -228,8 +235,7 @@
- #define MTK_TX_DONE_INT1	BIT(1)
- #define MTK_TX_DONE_INT0	BIT(0)
- #define MTK_RX_DONE_INT		MTK_RX_DONE_DLY
--#define MTK_TX_DONE_INT		(MTK_TX_DONE_INT0 | MTK_TX_DONE_INT1 | \
--				 MTK_TX_DONE_INT2 | MTK_TX_DONE_INT3)
-+#define MTK_TX_DONE_INT		MTK_TX_DONE_DLY
- 
- /* QDMA Interrupt grouping registers */
- #define MTK_QDMA_INT_GRP1	0x1a20
-@@ -912,6 +918,18 @@ struct mtk_eth {
- 
- 	const struct mtk_soc_data	*soc;
- 
-+	spinlock_t			dim_lock;
-+
-+	u32				rx_events;
-+	u32				rx_packets;
-+	u32				rx_bytes;
-+	struct dim			rx_dim;
-+
-+	u32				tx_events;
-+	u32				tx_packets;
-+	u32				tx_bytes;
-+	struct dim			tx_dim;
-+
- 	u32				tx_int_mask_reg;
- 	u32				tx_int_status_reg;
- 	u32				rx_dma_l4_valid;
diff --git a/target/linux/generic/pending-5.4/770-08-net-ethernet-mtk_eth_soc-cache-hardware-pointer-of-l.patch b/target/linux/generic/pending-5.4/770-08-net-ethernet-mtk_eth_soc-cache-hardware-pointer-of-l.patch
deleted file mode 100644
index b280b6cf4b..0000000000
--- a/target/linux/generic/pending-5.4/770-08-net-ethernet-mtk_eth_soc-cache-hardware-pointer-of-l.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 27 Aug 2020 06:32:03 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: cache hardware pointer of last
- freed tx descriptor
-
-The value is only updated by the CPU, so it is cheaper to access from the ring
-data structure than from a hardware register
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1379,7 +1379,7 @@ static int mtk_poll_tx_qdma(struct mtk_e
- 	struct mtk_tx_buf *tx_buf;
- 	u32 cpu, dma;
- 
--	cpu = mtk_r32(eth, MTK_QTX_CRX_PTR);
-+	cpu = ring->last_free_ptr;
- 	dma = mtk_r32(eth, MTK_QTX_DRX_PTR);
- 
- 	desc = mtk_qdma_phys_to_virt(ring, cpu);
-@@ -1413,6 +1413,7 @@ static int mtk_poll_tx_qdma(struct mtk_e
- 		cpu = next_cpu;
- 	}
- 
-+	ring->last_free_ptr = cpu;
- 	mtk_w32(eth, cpu, MTK_QTX_CRX_PTR);
- 
- 	return budget;
-@@ -1613,6 +1614,7 @@ static int mtk_tx_alloc(struct mtk_eth *
- 	atomic_set(&ring->free_count, MTK_DMA_SIZE - 2);
- 	ring->next_free = &ring->dma[0];
- 	ring->last_free = &ring->dma[MTK_DMA_SIZE - 1];
-+	ring->last_free_ptr = (u32)(ring->phys + ((MTK_DMA_SIZE - 1) * sz));
- 	ring->thresh = MAX_SKB_FRAGS;
- 
- 	/* make sure that all changes to the dma ring are flushed before we
-@@ -1626,9 +1628,7 @@ static int mtk_tx_alloc(struct mtk_eth *
- 		mtk_w32(eth,
- 			ring->phys + ((MTK_DMA_SIZE - 1) * sz),
- 			MTK_QTX_CRX_PTR);
--		mtk_w32(eth,
--			ring->phys + ((MTK_DMA_SIZE - 1) * sz),
--			MTK_QTX_DRX_PTR);
-+		mtk_w32(eth, ring->last_free_ptr, MTK_QTX_DRX_PTR);
- 		mtk_w32(eth, (QDMA_RES_THRES << 8) | QDMA_RES_THRES,
- 			MTK_QTX_CFG(0));
- 	} else {
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -644,6 +644,7 @@ struct mtk_tx_buf {
-  * @phys:		The physical addr of tx_buf
-  * @next_free:		Pointer to the next free descriptor
-  * @last_free:		Pointer to the last free descriptor
-+ * @last_free_ptr:	Hardware pointer value of the last free descriptor
-  * @thresh:		The threshold of minimum amount of free descriptors
-  * @free_count:		QDMA uses a linked list. Track how many free descriptors
-  *			are present
-@@ -654,6 +655,7 @@ struct mtk_tx_ring {
- 	dma_addr_t phys;
- 	struct mtk_tx_dma *next_free;
- 	struct mtk_tx_dma *last_free;
-+	u32 last_free_ptr;
- 	u16 thresh;
- 	atomic_t free_count;
- 	int dma_size;
diff --git a/target/linux/generic/pending-5.4/770-09-net-ethernet-mtk_eth_soc-only-read-the-full-rx-descr.patch b/target/linux/generic/pending-5.4/770-09-net-ethernet-mtk_eth_soc-only-read-the-full-rx-descr.patch
deleted file mode 100644
index c2f5013e26..0000000000
--- a/target/linux/generic/pending-5.4/770-09-net-ethernet-mtk_eth_soc-only-read-the-full-rx-descr.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 27 Aug 2020 09:24:25 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: only read the full rx
- descriptor if DMA is done
-
-Uncached memory access is expensive, and there is no need to access all
-descriptor words if we can't process them anyway
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -793,13 +793,18 @@ static inline int mtk_max_buf_size(int f
- 	return buf_size;
- }
- 
--static inline void mtk_rx_get_desc(struct mtk_rx_dma *rxd,
-+static inline bool mtk_rx_get_desc(struct mtk_rx_dma *rxd,
- 				   struct mtk_rx_dma *dma_rxd)
- {
--	rxd->rxd1 = READ_ONCE(dma_rxd->rxd1);
- 	rxd->rxd2 = READ_ONCE(dma_rxd->rxd2);
-+	if (!(rxd->rxd2 & RX_DMA_DONE))
-+		return false;
-+
-+	rxd->rxd1 = READ_ONCE(dma_rxd->rxd1);
- 	rxd->rxd3 = READ_ONCE(dma_rxd->rxd3);
- 	rxd->rxd4 = READ_ONCE(dma_rxd->rxd4);
-+
-+	return true;
- }
- 
- /* the qdma core needs scratch memory to be setup */
-@@ -1271,8 +1276,7 @@ static int mtk_poll_rx(struct napi_struc
- 		rxd = &ring->dma[idx];
- 		data = ring->data[idx];
- 
--		mtk_rx_get_desc(&trxd, rxd);
--		if (!(trxd.rxd2 & RX_DMA_DONE))
-+		if (!mtk_rx_get_desc(&trxd, rxd))
- 			break;
- 
- 		/* find out which mac the packet come from. values start at 1 */
diff --git a/target/linux/generic/pending-5.4/770-10-net-ethernet-mtk_eth_soc-unmap-rx-data-before-callin.patch b/target/linux/generic/pending-5.4/770-10-net-ethernet-mtk_eth_soc-unmap-rx-data-before-callin.patch
deleted file mode 100644
index 285fcf8971..0000000000
--- a/target/linux/generic/pending-5.4/770-10-net-ethernet-mtk_eth_soc-unmap-rx-data-before-callin.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 27 Aug 2020 09:44:43 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: unmap rx data before calling
- build_skb
-
-Since build_skb accesses the data area (for initializing shinfo), dma unmap
-needs to happen before that call
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1314,17 +1314,18 @@ static int mtk_poll_rx(struct napi_struc
- 			goto release_desc;
- 		}
- 
-+		dma_unmap_single(eth->dev, trxd.rxd1,
-+				 ring->buf_size, DMA_FROM_DEVICE);
-+
- 		/* receive data */
- 		skb = build_skb(data, ring->frag_size);
- 		if (unlikely(!skb)) {
--			skb_free_frag(new_data);
-+			skb_free_frag(data);
- 			netdev->stats.rx_dropped++;
--			goto release_desc;
-+			goto skip_rx;
- 		}
- 		skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN);
- 
--		dma_unmap_single(eth->dev, trxd.rxd1,
--				 ring->buf_size, DMA_FROM_DEVICE);
- 		pktlen = RX_DMA_GET_PLEN0(trxd.rxd2);
- 		skb->dev = netdev;
- 		skb_put(skb, pktlen);
-@@ -1342,6 +1343,7 @@ static int mtk_poll_rx(struct napi_struc
- 		skb_record_rx_queue(skb, 0);
- 		napi_gro_receive(napi, skb);
- 
-+skip_rx:
- 		ring->data[idx] = new_data;
- 		rxd->rxd1 = (unsigned int)dma_addr;
- 
diff --git a/target/linux/generic/pending-5.4/770-11-net-ethernet-mtk_eth_soc-avoid-rearming-interrupt-if.patch b/target/linux/generic/pending-5.4/770-11-net-ethernet-mtk_eth_soc-avoid-rearming-interrupt-if.patch
deleted file mode 100644
index 4036e32354..0000000000
--- a/target/linux/generic/pending-5.4/770-11-net-ethernet-mtk_eth_soc-avoid-rearming-interrupt-if.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 4 Sep 2020 18:14:05 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: avoid rearming interrupt if
- napi_complete returns false
-
-Reduces unnecessary interrupts
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1536,8 +1536,8 @@ static int mtk_napi_tx(struct napi_struc
- 	if (status & MTK_TX_DONE_INT)
- 		return budget;
- 
--	napi_complete(napi);
--	mtk_tx_irq_enable(eth, MTK_TX_DONE_INT);
-+	if (napi_complete(napi))
-+		mtk_tx_irq_enable(eth, MTK_TX_DONE_INT);
- 
- 	return tx_done;
- }
-@@ -1570,8 +1570,9 @@ poll_again:
- 		remain_budget -= rx_done;
- 		goto poll_again;
- 	}
--	napi_complete(napi);
--	mtk_rx_irq_enable(eth, MTK_RX_DONE_INT);
-+
-+	if (napi_complete(napi))
-+		mtk_rx_irq_enable(eth, MTK_RX_DONE_INT);
- 
- 	return rx_done + budget - remain_budget;
- }
diff --git a/target/linux/generic/pending-5.4/770-13-net-ethernet-mtk_eth_soc-fix-parsing-packets-in-GDM.patch b/target/linux/generic/pending-5.4/770-13-net-ethernet-mtk_eth_soc-fix-parsing-packets-in-GDM.patch
deleted file mode 100644
index b1bde7bbff..0000000000
--- a/target/linux/generic/pending-5.4/770-13-net-ethernet-mtk_eth_soc-fix-parsing-packets-in-GDM.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 13 Sep 2020 08:17:02 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: fix parsing packets in GDM
-
-When using DSA, set the special tag in GDM ingress control to allow the MAC
-to parse packets properly earlier. This affects rx DMA source port reporting.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -19,6 +19,7 @@
- #include <linux/interrupt.h>
- #include <linux/pinctrl/devinfo.h>
- #include <linux/phylink.h>
-+#include <net/dsa.h>
- 
- #include "mtk_eth_soc.h"
- 
-@@ -1280,13 +1281,12 @@ static int mtk_poll_rx(struct napi_struc
- 			break;
- 
- 		/* find out which mac the packet come from. values start at 1 */
--		if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) {
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628) ||
-+		    (trxd.rxd4 & RX_DMA_SPECIAL_TAG))
- 			mac = 0;
--		} else {
--			mac = (trxd.rxd4 >> RX_DMA_FPORT_SHIFT) &
--				RX_DMA_FPORT_MASK;
--			mac--;
--		}
-+		else
-+			mac = ((trxd.rxd4 >> RX_DMA_FPORT_SHIFT) &
-+			       RX_DMA_FPORT_MASK) - 1;
- 
- 		if (unlikely(mac < 0 || mac >= MTK_MAC_COUNT ||
- 			     !eth->netdev[mac]))
-@@ -2268,6 +2268,9 @@ static void mtk_gdm_config(struct mtk_et
- 
- 		val |= config;
- 
-+		if (!i && eth->netdev[0] && netdev_uses_dsa(eth->netdev[0]))
-+			val |= MTK_GDMA_SPECIAL_TAG;
-+
- 		mtk_w32(eth, val, MTK_GDMA_FWD_CFG(i));
- 	}
- 	/* Reset and enable PSE */
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -82,6 +82,7 @@
- 
- /* GDM Exgress Control Register */
- #define MTK_GDMA_FWD_CFG(x)	(0x500 + (x * 0x1000))
-+#define MTK_GDMA_SPECIAL_TAG	BIT(24)
- #define MTK_GDMA_ICS_EN		BIT(22)
- #define MTK_GDMA_TCS_EN		BIT(21)
- #define MTK_GDMA_UCS_EN		BIT(20)
-@@ -324,6 +325,7 @@
- #define RX_DMA_L4_VALID_PDMA	BIT(30)		/* when PDMA is used */
- #define RX_DMA_FPORT_SHIFT	19
- #define RX_DMA_FPORT_MASK	0x7
-+#define RX_DMA_SPECIAL_TAG	BIT(22)
- 
- /* PHY Indirect Access Control registers */
- #define MTK_PHY_IAC		0x10004
diff --git a/target/linux/generic/pending-5.4/770-14-net-ethernet-mtk_eth_soc-set-PPE-flow-hash-as-skb-ha.patch b/target/linux/generic/pending-5.4/770-14-net-ethernet-mtk_eth_soc-set-PPE-flow-hash-as-skb-ha.patch
deleted file mode 100644
index 4ab3d84163..0000000000
--- a/target/linux/generic/pending-5.4/770-14-net-ethernet-mtk_eth_soc-set-PPE-flow-hash-as-skb-ha.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 13 Sep 2020 08:27:24 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: set PPE flow hash as skb hash
- if present
-
-This improves GRO performance
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -19,6 +19,7 @@
- #include <linux/interrupt.h>
- #include <linux/pinctrl/devinfo.h>
- #include <linux/phylink.h>
-+#include <linux/jhash.h>
- #include <net/dsa.h>
- 
- #include "mtk_eth_soc.h"
-@@ -1267,6 +1268,7 @@ static int mtk_poll_rx(struct napi_struc
- 		struct net_device *netdev;
- 		unsigned int pktlen;
- 		dma_addr_t dma_addr;
-+		u32 hash;
- 		int mac;
- 
- 		ring = mtk_get_rx_ring(eth);
-@@ -1336,6 +1338,12 @@ static int mtk_poll_rx(struct napi_struc
- 		skb->protocol = eth_type_trans(skb, netdev);
- 		bytes += pktlen;
- 
-+		hash = trxd.rxd4 & GENMASK(13, 0);
-+		if (hash != GENMASK(13, 0)) {
-+			hash = jhash_1word(hash, 0);
-+			skb_set_hash(skb, hash, PKT_HASH_TYPE_L4);
-+		}
-+
- 		if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX &&
- 		    (trxd.rxd2 & RX_DMA_VTAG))
- 			__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
diff --git a/target/linux/generic/pending-5.4/770-15-net-ethernet-mediatek-mtk_eth_soc-add-support-for-in.patch b/target/linux/generic/pending-5.4/770-15-net-ethernet-mediatek-mtk_eth_soc-add-support-for-in.patch
deleted file mode 100644
index 8847870fb7..0000000000
--- a/target/linux/generic/pending-5.4/770-15-net-ethernet-mediatek-mtk_eth_soc-add-support-for-in.patch
+++ /dev/null
@@ -1,1058 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 11 Oct 2020 22:23:08 +0200
-Subject: [PATCH] ethernet: mediatek: mtk_eth_soc: add support for
- initializing the PPE
-
-The PPE (packet processing engine) is used to offload NAT/routed or even
-bridged flows. This patch brings up the PPE and uses it to get a packet
-hash. It also contains some functionality that will be used to bring up
-flow offloading later
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- create mode 100644 drivers/net/ethernet/mediatek/mtk_ppe.c
- create mode 100644 drivers/net/ethernet/mediatek/mtk_ppe.h
- create mode 100644 drivers/net/ethernet/mediatek/mtk_ppe_regs.h
-
---- a/drivers/net/ethernet/mediatek/Makefile
-+++ b/drivers/net/ethernet/mediatek/Makefile
-@@ -4,4 +4,4 @@
- #
- 
- obj-$(CONFIG_NET_MEDIATEK_SOC)                 += mtk_eth.o
--mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o
-+mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o mtk_ppe.o
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2301,12 +2301,17 @@ static int mtk_open(struct net_device *d
- 
- 	/* we run 2 netdevs on the same dma ring so we only bring it up once */
- 	if (!refcount_read(&eth->dma_refcnt)) {
--		int err = mtk_start_dma(eth);
-+		u32 gdm_config = MTK_GDMA_TO_PDMA;
-+		int err;
- 
-+		err = mtk_start_dma(eth);
- 		if (err)
- 			return err;
- 
--		mtk_gdm_config(eth, MTK_GDMA_TO_PDMA);
-+		if (eth->soc->offload_version && mtk_ppe_start(&eth->ppe) == 0)
-+			gdm_config = MTK_GDMA_TO_PPE;
-+
-+		mtk_gdm_config(eth, gdm_config);
- 
- 		napi_enable(&eth->tx_napi);
- 		napi_enable(&eth->rx_napi);
-@@ -2376,6 +2381,9 @@ static int mtk_stop(struct net_device *d
- 
- 	mtk_dma_free(eth);
- 
-+	if (eth->soc->offload_version)
-+		mtk_ppe_stop(&eth->ppe);
-+
- 	return 0;
- }
- 
-@@ -3162,6 +3170,13 @@ static int mtk_probe(struct platform_dev
- 			goto err_free_dev;
- 	}
- 
-+	if (eth->soc->offload_version) {
-+		err = mtk_ppe_init(&eth->ppe, eth->dev,
-+				   eth->base + MTK_ETH_PPE_BASE, 2);
-+		if (err)
-+			goto err_free_dev;
-+	}
-+
- 	for (i = 0; i < MTK_MAX_DEVS; i++) {
- 		if (!eth->netdev[i])
- 			continue;
-@@ -3236,6 +3251,7 @@ static const struct mtk_soc_data mt7621_
- 	.hw_features = MTK_HW_FEATURES,
- 	.required_clks = MT7621_CLKS_BITMAP,
- 	.required_pctl = false,
-+	.offload_version = 2,
- };
- 
- static const struct mtk_soc_data mt7622_data = {
-@@ -3244,6 +3260,7 @@ static const struct mtk_soc_data mt7622_
- 	.hw_features = MTK_HW_FEATURES,
- 	.required_clks = MT7622_CLKS_BITMAP,
- 	.required_pctl = false,
-+	.offload_version = 2,
- };
- 
- static const struct mtk_soc_data mt7623_data = {
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -16,6 +16,7 @@
- #include <linux/refcount.h>
- #include <linux/phylink.h>
- #include <linux/dim.h>
-+#include "mtk_ppe.h"
- 
- #define MTK_QDMA_PAGE_SIZE	2048
- #define	MTK_MAX_RX_LENGTH	1536
-@@ -87,6 +88,7 @@
- #define MTK_GDMA_TCS_EN		BIT(21)
- #define MTK_GDMA_UCS_EN		BIT(20)
- #define MTK_GDMA_TO_PDMA	0x0
-+#define MTK_GDMA_TO_PPE		0x4444
- #define MTK_GDMA_DROP_ALL       0x7777
- 
- /* Unicast Filter MAC Address Register - Low */
-@@ -321,6 +323,12 @@
- #define RX_DMA_VID(_x)		((_x) & 0xfff)
- 
- /* QDMA descriptor rxd4 */
-+#define MTK_RXD4_FOE_ENTRY	GENMASK(13, 0)
-+#define MTK_RXD4_PPE_CPU_REASON	GENMASK(18, 14)
-+#define MTK_RXD4_SRC_PORT	GENMASK(21, 19)
-+#define MTK_RXD4_ALG		GENMASK(31, 22)
-+
-+/* QDMA descriptor rxd4 */
- #define RX_DMA_L4_VALID		BIT(24)
- #define RX_DMA_L4_VALID_PDMA	BIT(30)		/* when PDMA is used */
- #define RX_DMA_FPORT_SHIFT	19
-@@ -827,6 +835,7 @@ struct mtk_soc_data {
- 	u32		caps;
- 	u32		required_clks;
- 	bool		required_pctl;
-+	u8		offload_version;
- 	netdev_features_t hw_features;
- };
- 
-@@ -938,6 +947,8 @@ struct mtk_eth {
- 	u32				tx_int_status_reg;
- 	u32				rx_dma_l4_valid;
- 	int				ip_align;
-+
-+	struct mtk_ppe			ppe;
- };
- 
- /* struct mtk_mac -	the structure that holds the info about the MACs of the
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -0,0 +1,497 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* Copyright (C) 2020 Felix Fietkau <nbd@nbd.name> */
-+
-+#include <linux/kernel.h>
-+#include <linux/jiffies.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/etherdevice.h>
-+#include <linux/platform_device.h>
-+#include "mtk_ppe.h"
-+#include "mtk_ppe_regs.h"
-+
-+static void ppe_w32(struct mtk_ppe *ppe, u32 reg, u32 val)
-+{
-+	writel(val, ppe->base + reg);
-+}
-+
-+static u32 ppe_r32(struct mtk_ppe *ppe, u32 reg)
-+{
-+	return readl(ppe->base + reg);
-+}
-+
-+static u32 ppe_m32(struct mtk_ppe *ppe, u32 reg, u32 mask, u32 set)
-+{
-+	u32 val;
-+
-+	val = ppe_r32(ppe, reg);
-+	val &= ~mask;
-+	val |= set;
-+	ppe_w32(ppe, reg, val);
-+
-+	return val;
-+}
-+
-+static u32 ppe_set(struct mtk_ppe *ppe, u32 reg, u32 val)
-+{
-+	return ppe_m32(ppe, reg, 0, val);
-+}
-+
-+static u32 ppe_clear(struct mtk_ppe *ppe, u32 reg, u32 val)
-+{
-+	return ppe_m32(ppe, reg, val, 0);
-+}
-+
-+static int mtk_ppe_wait_busy(struct mtk_ppe *ppe)
-+{
-+	unsigned long timeout = jiffies + HZ;
-+
-+	while (time_is_after_jiffies(timeout)) {
-+		if (!(ppe_r32(ppe, MTK_PPE_GLO_CFG) & MTK_PPE_GLO_CFG_BUSY))
-+			return 0;
-+
-+		usleep_range(10, 20);
-+	}
-+
-+	dev_err(ppe->dev, "PPE table busy");
-+
-+	return -ETIMEDOUT;
-+}
-+
-+static void mtk_ppe_cache_clear(struct mtk_ppe *ppe)
-+{
-+	ppe_set(ppe, MTK_PPE_CACHE_CTL, MTK_PPE_CACHE_CTL_CLEAR);
-+	ppe_clear(ppe, MTK_PPE_CACHE_CTL, MTK_PPE_CACHE_CTL_CLEAR);
-+}
-+
-+static void mtk_ppe_cache_enable(struct mtk_ppe *ppe, bool enable)
-+{
-+	mtk_ppe_cache_clear(ppe);
-+
-+	ppe_m32(ppe, MTK_PPE_CACHE_CTL, MTK_PPE_CACHE_CTL_EN,
-+		enable * MTK_PPE_CACHE_CTL_EN);
-+}
-+
-+static u32 mtk_ppe_hash_entry(struct mtk_foe_entry *e)
-+{
-+	u32 hv1, hv2, hv3;
-+	u32 hash;
-+
-+	switch (FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, e->ib1)) {
-+		case MTK_PPE_PKT_TYPE_BRIDGE:
-+			hv1 = e->bridge.src_mac_lo;
-+			hv1 ^= ((e->bridge.src_mac_hi & 0xffff) << 16);
-+			hv2 = e->bridge.src_mac_hi >> 16;
-+			hv2 ^= e->bridge.dest_mac_lo;
-+			hv3 = e->bridge.dest_mac_hi;
-+			break;
-+		case MTK_PPE_PKT_TYPE_IPV4_ROUTE:
-+		case MTK_PPE_PKT_TYPE_IPV4_HNAPT:
-+			hv1 = e->ipv4.orig.ports;
-+			hv2 = e->ipv4.orig.dest_ip;
-+			hv3 = e->ipv4.orig.src_ip;
-+			break;
-+		case MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T:
-+		case MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T:
-+			hv1 = e->ipv6.src_ip[3] ^ e->ipv6.dest_ip[3];
-+			hv1 ^= e->ipv6.ports;
-+
-+			hv2 = e->ipv6.src_ip[2] ^ e->ipv6.dest_ip[2];
-+			hv2 ^= e->ipv6.dest_ip[0];
-+
-+			hv3 = e->ipv6.src_ip[1] ^ e->ipv6.dest_ip[1];
-+			hv3 ^= e->ipv6.src_ip[0];
-+			break;
-+		case MTK_PPE_PKT_TYPE_IPV4_DSLITE:
-+		case MTK_PPE_PKT_TYPE_IPV6_6RD:
-+		default:
-+			WARN_ON_ONCE(1);
-+			return MTK_PPE_HASH_MASK;
-+	}
-+
-+	hash = (hv1 & hv2) | ((~hv1) & hv3);
-+	hash = (hash >> 24) | ((hash & 0xffffff) << 8);
-+	hash ^= hv1 ^ hv2 ^ hv3;
-+	hash ^= hash >> 16;
-+	hash <<= 1;
-+	hash &= MTK_PPE_ENTRIES - 1;
-+
-+	return hash;
-+}
-+
-+static inline struct mtk_foe_mac_info *
-+mtk_foe_entry_l2(struct mtk_foe_entry *entry)
-+{
-+	int type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1);
-+
-+	if (type >= MTK_PPE_PKT_TYPE_IPV4_DSLITE)
-+		return &entry->ipv6.l2;
-+
-+	return &entry->ipv4.l2;
-+}
-+
-+static inline u32 *
-+mtk_foe_entry_ib2(struct mtk_foe_entry *entry)
-+{
-+	int type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1);
-+
-+	if (type >= MTK_PPE_PKT_TYPE_IPV4_DSLITE)
-+		return &entry->ipv6.ib2;
-+
-+	return &entry->ipv4.ib2;
-+}
-+
-+int mtk_foe_entry_prepare(struct mtk_foe_entry *entry, int type, int l4proto,
-+			  u8 pse_port, u8 *src_mac, u8 *dest_mac)
-+{
-+	struct mtk_foe_mac_info *l2;
-+	u32 ports_pad, val;
-+
-+	memset(entry, 0, sizeof(*entry));
-+
-+	val = FIELD_PREP(MTK_FOE_IB1_STATE, MTK_FOE_STATE_BIND) |
-+	      FIELD_PREP(MTK_FOE_IB1_PACKET_TYPE, type) |
-+	      FIELD_PREP(MTK_FOE_IB1_UDP, l4proto == IPPROTO_UDP) |
-+	      MTK_FOE_IB1_BIND_TTL |
-+	      MTK_FOE_IB1_BIND_CACHE |
-+	      MTK_FOE_IB1_BIND_KEEPALIVE;
-+	entry->ib1 = val;
-+
-+	val = FIELD_PREP(MTK_FOE_IB2_PORT_MG, 0x3f) |
-+	      FIELD_PREP(MTK_FOE_IB2_PORT_AG, 0x1f) |
-+	      FIELD_PREP(MTK_FOE_IB2_DEST_PORT, pse_port);
-+
-+	if (is_multicast_ether_addr(dest_mac))
-+		val |= MTK_FOE_IB2_MULTICAST;
-+
-+	ports_pad = 0xa5a5a500 | (l4proto & 0xff);
-+	if (type == MTK_PPE_PKT_TYPE_IPV4_ROUTE)
-+		entry->ipv4.orig.ports = ports_pad;
-+	if (type == MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T)
-+		entry->ipv6.ports = ports_pad;
-+
-+	if (type >= MTK_PPE_PKT_TYPE_IPV4_DSLITE) {
-+		entry->ipv6.ib2 = val;
-+		l2 = &entry->ipv6.l2;
-+	} else {
-+		entry->ipv4.ib2 = val;
-+		l2 = &entry->ipv4.l2;
-+	}
-+
-+	l2->dest_mac_hi = get_unaligned_be32(dest_mac);
-+	l2->dest_mac_lo = get_unaligned_be16(dest_mac + 4);
-+	l2->src_mac_hi = get_unaligned_be32(src_mac);
-+	l2->src_mac_lo = get_unaligned_be16(src_mac + 4);
-+
-+	if (type >= MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T)
-+		l2->etype = ETH_P_IPV6;
-+	else
-+		l2->etype = ETH_P_IP;
-+
-+	return 0;
-+}
-+
-+int mtk_foe_entry_set_ipv4_tuple(struct mtk_foe_entry *entry, bool egress,
-+				 __be32 src_addr, __be16 src_port,
-+				 __be32 dest_addr, __be16 dest_port)
-+{
-+	int type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1);
-+	struct mtk_ipv4_tuple *t;
-+
-+	switch (type) {
-+	case MTK_PPE_PKT_TYPE_IPV4_HNAPT:
-+		if (egress) {
-+			t = &entry->ipv4.new;
-+			break;
-+		}
-+		fallthrough;
-+	case MTK_PPE_PKT_TYPE_IPV4_DSLITE:
-+	case MTK_PPE_PKT_TYPE_IPV4_ROUTE:
-+		t = &entry->ipv4.orig;
-+		break;
-+	case MTK_PPE_PKT_TYPE_IPV6_6RD:
-+		entry->ipv6_6rd.tunnel_src_ip = be32_to_cpu(src_addr);
-+		entry->ipv6_6rd.tunnel_dest_ip = be32_to_cpu(dest_addr);
-+		return 0;
-+	default:
-+		WARN_ON_ONCE(1);
-+		return -EINVAL;
-+	}
-+
-+	t->src_ip = be32_to_cpu(src_addr);
-+	t->dest_ip = be32_to_cpu(dest_addr);
-+
-+	if (type == MTK_PPE_PKT_TYPE_IPV4_ROUTE)
-+		return 0;
-+
-+	t->src_port = be16_to_cpu(src_port);
-+	t->dest_port = be16_to_cpu(dest_port);
-+
-+	return 0;
-+}
-+
-+int mtk_foe_entry_set_ipv6_tuple(struct mtk_foe_entry *entry,
-+				 __be32 *src_addr, __be16 src_port,
-+				 __be32 *dest_addr, __be16 dest_port)
-+{
-+	int type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1);
-+	u32 *src, *dest;
-+	int i;
-+
-+	switch (type) {
-+	case MTK_PPE_PKT_TYPE_IPV4_DSLITE:
-+		src = entry->dslite.tunnel_src_ip;
-+		dest = entry->dslite.tunnel_dest_ip;
-+		break;
-+	case MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T:
-+	case MTK_PPE_PKT_TYPE_IPV6_6RD:
-+		entry->ipv6.src_port = be16_to_cpu(src_port);
-+		entry->ipv6.dest_port = be16_to_cpu(dest_port);
-+		fallthrough;
-+	case MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T:
-+		src = entry->ipv6.src_ip;
-+		dest = entry->ipv6.dest_ip;
-+		break;
-+	default:
-+		WARN_ON_ONCE(1);
-+		return -EINVAL;
-+	};
-+
-+	for (i = 0; i < 4; i++)
-+		src[i] = be32_to_cpu(src_addr[i]);
-+	for (i = 0; i < 4; i++)
-+		dest[i] = be32_to_cpu(dest_addr[i]);
-+
-+	return 0;
-+}
-+
-+int mtk_foe_entry_set_dsa(struct mtk_foe_entry *entry, int port)
-+{
-+	struct mtk_foe_mac_info *l2 = mtk_foe_entry_l2(entry);
-+
-+	l2->etype = BIT(port);
-+
-+	if (!(entry->ib1 & MTK_FOE_IB1_BIND_VLAN_LAYER))
-+		entry->ib1 |= FIELD_PREP(MTK_FOE_IB1_BIND_VLAN_LAYER, 1);
-+	else
-+		l2->etype |= BIT(8);
-+
-+	entry->ib1 &= ~MTK_FOE_IB1_BIND_VLAN_TAG;
-+
-+	return 0;
-+}
-+
-+int mtk_foe_entry_set_vlan(struct mtk_foe_entry *entry, int vid)
-+{
-+	struct mtk_foe_mac_info *l2 = mtk_foe_entry_l2(entry);
-+
-+	switch (FIELD_GET(MTK_FOE_IB1_BIND_VLAN_LAYER, entry->ib1)) {
-+	case 0:
-+		entry->ib1 |= MTK_FOE_IB1_BIND_VLAN_TAG |
-+			      FIELD_PREP(MTK_FOE_IB1_BIND_VLAN_LAYER, 1);
-+		l2->vlan1 = vid;
-+		return 0;
-+	case 1:
-+		if (!(entry->ib1 & MTK_FOE_IB1_BIND_VLAN_TAG)) {
-+			l2->vlan1 = vid;
-+			l2->etype |= BIT(8);
-+		} else {
-+			l2->vlan2 = vid;
-+			entry->ib1 += FIELD_PREP(MTK_FOE_IB1_BIND_VLAN_LAYER, 1);
-+		}
-+		return 0;
-+	default:
-+		return -ENOSPC;
-+	}
-+}
-+
-+int mtk_foe_entry_set_pppoe(struct mtk_foe_entry *entry, int sid)
-+{
-+	struct mtk_foe_mac_info *l2 = mtk_foe_entry_l2(entry);
-+
-+	if (!(entry->ib1 & MTK_FOE_IB1_BIND_VLAN_LAYER) ||
-+	    (entry->ib1 & MTK_FOE_IB1_BIND_VLAN_TAG))
-+		l2->etype = ETH_P_PPP_SES;
-+
-+	entry->ib1 |= MTK_FOE_IB1_BIND_PPPOE;
-+	l2->pppoe_id = sid;
-+
-+	return 0;
-+}
-+
-+static inline bool mtk_foe_entry_usable(struct mtk_foe_entry *entry)
-+{
-+	return !(entry->ib1 & MTK_FOE_IB1_STATIC) &&
-+	       FIELD_GET(MTK_FOE_IB1_STATE, entry->ib1) != MTK_FOE_STATE_BIND;
-+}
-+
-+int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_foe_entry *entry,
-+			 u16 timestamp)
-+{
-+	struct mtk_foe_entry *hwe;
-+	u32 hash;
-+
-+	timestamp &= MTK_FOE_IB1_BIND_TIMESTAMP;
-+	entry->ib1 &= ~MTK_FOE_IB1_BIND_TIMESTAMP;
-+	entry->ib1 |= FIELD_PREP(MTK_FOE_IB1_BIND_TIMESTAMP, timestamp);
-+
-+	hash = mtk_ppe_hash_entry(entry);
-+	hwe = &ppe->foe_table[hash];
-+	if (!mtk_foe_entry_usable(hwe)) {
-+		hwe++;
-+		hash++;
-+
-+		if (!mtk_foe_entry_usable(hwe))
-+			return -ENOSPC;
-+	}
-+
-+	memcpy(&hwe->data, &entry->data, sizeof(hwe->data));
-+	wmb();
-+	hwe->ib1 = entry->ib1;
-+
-+	dma_wmb();
-+
-+	mtk_ppe_cache_clear(ppe);
-+
-+	return hash;
-+}
-+
-+int mtk_ppe_init(struct mtk_ppe *ppe, struct device *dev, void __iomem *base,
-+		 int version)
-+{
-+	struct mtk_foe_entry *foe;
-+
-+	/* need to allocate a separate device, since it PPE DMA access is
-+	 * not coherent.
-+	 */
-+	ppe->base = base;
-+	ppe->dev = dev;
-+	ppe->version = version;
-+
-+	foe = dmam_alloc_coherent(ppe->dev, MTK_PPE_ENTRIES * sizeof(*foe),
-+				  &ppe->foe_phys, GFP_KERNEL);
-+	if (!foe)
-+		return -ENOMEM;
-+
-+	ppe->foe_table = foe;
-+
-+	return 0;
-+}
-+
-+static void mtk_ppe_init_foe_table(struct mtk_ppe *ppe)
-+{
-+	static const u8 skip[] = { 12, 25, 38, 51, 76, 89, 102 };
-+	int i, k;
-+
-+	memset(ppe->foe_table, 0, MTK_PPE_ENTRIES * sizeof(ppe->foe_table));
-+
-+	if (!IS_ENABLED(CONFIG_SOC_MT7621))
-+		return;
-+
-+	/* skip all entries that cross the 1024 byte boundary */
-+	for (i = 0; i < MTK_PPE_ENTRIES; i += 128)
-+		for (k = 0; k < ARRAY_SIZE(skip); k++)
-+			ppe->foe_table[i + skip[k]].ib1 |= MTK_FOE_IB1_STATIC;
-+}
-+
-+int mtk_ppe_start(struct mtk_ppe *ppe)
-+{
-+	u32 val;
-+
-+	mtk_ppe_init_foe_table(ppe);
-+	ppe_w32(ppe, MTK_PPE_TB_BASE, ppe->foe_phys);
-+
-+	val = MTK_PPE_TB_CFG_ENTRY_80B |
-+	      MTK_PPE_TB_CFG_AGE_NON_L4 |
-+	      MTK_PPE_TB_CFG_AGE_UNBIND |
-+	      MTK_PPE_TB_CFG_AGE_TCP |
-+	      MTK_PPE_TB_CFG_AGE_UDP |
-+	      MTK_PPE_TB_CFG_AGE_TCP_FIN |
-+	      FIELD_PREP(MTK_PPE_TB_CFG_SEARCH_MISS,
-+			 MTK_PPE_SEARCH_MISS_ACTION_FORWARD_BUILD) |
-+	      FIELD_PREP(MTK_PPE_TB_CFG_KEEPALIVE,
-+			 MTK_PPE_KEEPALIVE_DUP_CPU) |
-+	      FIELD_PREP(MTK_PPE_TB_CFG_HASH_MODE, 1) |
-+	      FIELD_PREP(MTK_PPE_TB_CFG_SCAN_MODE,
-+			 MTK_PPE_SCAN_MODE_KEEPALIVE_AGE) |
-+	      FIELD_PREP(MTK_PPE_TB_CFG_ENTRY_NUM,
-+			 MTK_PPE_ENTRIES_SHIFT);
-+	ppe_w32(ppe, MTK_PPE_TB_CFG, val);
-+
-+	ppe_w32(ppe, MTK_PPE_IP_PROTO_CHK,
-+		MTK_PPE_IP_PROTO_CHK_IPV4 | MTK_PPE_IP_PROTO_CHK_IPV6);
-+
-+	mtk_ppe_cache_enable(ppe, true);
-+
-+	val = MTK_PPE_FLOW_CFG_IP4_TCP_FRAG |
-+	      MTK_PPE_FLOW_CFG_IP4_UDP_FRAG |
-+	      MTK_PPE_FLOW_CFG_IP6_3T_ROUTE |
-+	      MTK_PPE_FLOW_CFG_IP6_5T_ROUTE |
-+	      MTK_PPE_FLOW_CFG_IP6_6RD |
-+	      MTK_PPE_FLOW_CFG_IP4_NAT |
-+	      MTK_PPE_FLOW_CFG_IP4_NAPT |
-+	      MTK_PPE_FLOW_CFG_IP4_DSLITE |
-+	      MTK_PPE_FLOW_CFG_L2_BRIDGE |
-+	      MTK_PPE_FLOW_CFG_IP4_NAT_FRAG;
-+	ppe_w32(ppe, MTK_PPE_FLOW_CFG, val);
-+
-+	val = FIELD_PREP(MTK_PPE_UNBIND_AGE_MIN_PACKETS, 1000) |
-+	      FIELD_PREP(MTK_PPE_UNBIND_AGE_DELTA, 3);
-+	ppe_w32(ppe, MTK_PPE_UNBIND_AGE, val);
-+
-+	val = FIELD_PREP(MTK_PPE_BIND_AGE0_DELTA_UDP, 12) |
-+	      FIELD_PREP(MTK_PPE_BIND_AGE0_DELTA_NON_L4, 1);
-+	ppe_w32(ppe, MTK_PPE_BIND_AGE0, val);
-+
-+	val = FIELD_PREP(MTK_PPE_BIND_AGE1_DELTA_TCP_FIN, 1) |
-+	      FIELD_PREP(MTK_PPE_BIND_AGE1_DELTA_TCP, 7);
-+	ppe_w32(ppe, MTK_PPE_BIND_AGE1, val);
-+
-+	val = MTK_PPE_BIND_LIMIT0_QUARTER | MTK_PPE_BIND_LIMIT0_HALF;
-+	ppe_w32(ppe, MTK_PPE_BIND_LIMIT0, val);
-+
-+	val = MTK_PPE_BIND_LIMIT1_FULL |
-+	      FIELD_PREP(MTK_PPE_BIND_LIMIT1_NON_L4, 1);
-+	ppe_w32(ppe, MTK_PPE_BIND_LIMIT1, val);
-+
-+	val = FIELD_PREP(MTK_PPE_BIND_RATE_BIND, 30) |
-+	      FIELD_PREP(MTK_PPE_BIND_RATE_PREBIND, 1);
-+	ppe_w32(ppe, MTK_PPE_BIND_RATE, val);
-+
-+	/* enable PPE */
-+	val = MTK_PPE_GLO_CFG_EN |
-+	      MTK_PPE_GLO_CFG_IP4_L4_CS_DROP |
-+	      MTK_PPE_GLO_CFG_IP4_CS_DROP |
-+	      MTK_PPE_GLO_CFG_FLOW_DROP_UPDATE;
-+	ppe_w32(ppe, MTK_PPE_GLO_CFG, val);
-+
-+	ppe_w32(ppe, MTK_PPE_DEFAULT_CPU_PORT, 0);
-+
-+	return 0;
-+}
-+
-+int mtk_ppe_stop(struct mtk_ppe *ppe)
-+{
-+	u32 val;
-+	int i;
-+
-+	for (i = 0; i < MTK_PPE_ENTRIES; i++)
-+		ppe->foe_table[i].ib1 = FIELD_PREP(MTK_FOE_IB1_STATE,
-+						   MTK_FOE_STATE_INVALID);
-+
-+	mtk_ppe_cache_enable(ppe, false);
-+
-+	/* disable offload engine */
-+	ppe_clear(ppe, MTK_PPE_GLO_CFG, MTK_PPE_GLO_CFG_EN);
-+	ppe_w32(ppe, MTK_PPE_FLOW_CFG, 0);
-+
-+	/* disable aging */
-+	val = MTK_PPE_TB_CFG_AGE_NON_L4 |
-+	      MTK_PPE_TB_CFG_AGE_UNBIND |
-+	      MTK_PPE_TB_CFG_AGE_TCP |
-+	      MTK_PPE_TB_CFG_AGE_UDP |
-+	      MTK_PPE_TB_CFG_AGE_TCP_FIN;
-+	ppe_clear(ppe, MTK_PPE_TB_CFG, val);
-+
-+	return mtk_ppe_wait_busy(ppe);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -0,0 +1,274 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* Copyright (C) 2020 Felix Fietkau <nbd@nbd.name> */
-+
-+#ifndef __MTK_PPE_H
-+#define __MTK_PPE_H
-+
-+#include <linux/kernel.h>
-+#include <linux/bitfield.h>
-+
-+#define MTK_ETH_PPE_BASE		0xc00
-+
-+#define MTK_PPE_ENTRIES_SHIFT		3
-+#define MTK_PPE_ENTRIES			(1024 << MTK_PPE_ENTRIES_SHIFT)
-+#define MTK_PPE_HASH_MASK		(MTK_PPE_ENTRIES - 1)
-+
-+#define MTK_FOE_IB1_UNBIND_TIMESTAMP	GENMASK(7, 0)
-+#define MTK_FOE_IB1_UNBIND_PACKETS	GENMASK(23, 8)
-+#define MTK_FOE_IB1_UNBIND_PREBIND	BIT(24)
-+
-+#define MTK_FOE_IB1_BIND_TIMESTAMP	GENMASK(14, 0)
-+#define MTK_FOE_IB1_BIND_KEEPALIVE	BIT(15)
-+#define MTK_FOE_IB1_BIND_VLAN_LAYER	GENMASK(18, 16)
-+#define MTK_FOE_IB1_BIND_PPPOE		BIT(19)
-+#define MTK_FOE_IB1_BIND_VLAN_TAG	BIT(20)
-+#define MTK_FOE_IB1_BIND_PKT_SAMPLE	BIT(21)
-+#define MTK_FOE_IB1_BIND_CACHE		BIT(22)
-+#define MTK_FOE_IB1_BIND_TUNNEL_DECAP	BIT(23)
-+#define MTK_FOE_IB1_BIND_TTL		BIT(24)
-+
-+#define MTK_FOE_IB1_PACKET_TYPE		GENMASK(27, 25)
-+#define MTK_FOE_IB1_STATE		GENMASK(29, 28)
-+#define MTK_FOE_IB1_UDP			BIT(30)
-+#define MTK_FOE_IB1_STATIC		BIT(31)
-+
-+enum {
-+	MTK_PPE_PKT_TYPE_IPV4_HNAPT = 0,
-+	MTK_PPE_PKT_TYPE_IPV4_ROUTE = 1,
-+	MTK_PPE_PKT_TYPE_BRIDGE = 2,
-+	MTK_PPE_PKT_TYPE_IPV4_DSLITE = 3,
-+	MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T = 4,
-+	MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T = 5,
-+	MTK_PPE_PKT_TYPE_IPV6_6RD = 7,
-+};
-+
-+#define MTK_FOE_IB2_QID			GENMASK(3, 0)
-+#define MTK_FOE_IB2_PSE_QOS		BIT(4)
-+#define MTK_FOE_IB2_DEST_PORT		GENMASK(7, 5)
-+#define MTK_FOE_IB2_MULTICAST		BIT(8)
-+
-+#define MTK_FOE_IB2_WHNAT_QID2		GENMASK(13, 12)
-+#define MTK_FOE_IB2_WHNAT_DEVIDX	BIT(16)
-+#define MTK_FOE_IB2_WHNAT_NAT		BIT(17)
-+
-+#define MTK_FOE_IB2_PORT_MG		GENMASK(17, 12)
-+
-+#define MTK_FOE_IB2_PORT_AG		GENMASK(23, 18)
-+
-+#define MTK_FOE_IB2_DSCP		GENMASK(31, 24)
-+
-+#define MTK_FOE_VLAN2_WHNAT_BSS		GEMMASK(5, 0)
-+#define MTK_FOE_VLAN2_WHNAT_WCID	GENMASK(13, 6)
-+#define MTK_FOE_VLAN2_WHNAT_RING	GENMASK(15, 14)
-+
-+enum {
-+	MTK_FOE_STATE_INVALID,
-+	MTK_FOE_STATE_UNBIND,
-+	MTK_FOE_STATE_BIND,
-+	MTK_FOE_STATE_FIN
-+};
-+
-+struct mtk_foe_mac_info {
-+	u16 vlan1;
-+	u16 etype;
-+
-+	u32 dest_mac_hi;
-+
-+	u16 vlan2;
-+	u16 dest_mac_lo;
-+
-+	u32 src_mac_hi;
-+
-+	u16 pppoe_id;
-+	u16 src_mac_lo;
-+};
-+
-+struct mtk_foe_bridge {
-+	u32 dest_mac_hi;
-+
-+	u16 src_mac_lo;
-+	u16 dest_mac_lo;
-+
-+	u32 src_mac_hi;
-+
-+	u32 ib2;
-+
-+	u32 _rsv[5];
-+
-+	u32 udf_tsid;
-+	struct mtk_foe_mac_info l2;
-+};
-+
-+struct mtk_ipv4_tuple {
-+	u32 src_ip;
-+	u32 dest_ip;
-+	union {
-+		struct {
-+			u16 dest_port;
-+			u16 src_port;
-+		};
-+		struct {
-+			u8 protocol;
-+			u8 _pad[3]; /* fill with 0xa5a5a5 */
-+		};
-+		u32 ports;
-+	};
-+};
-+
-+struct mtk_foe_ipv4 {
-+	struct mtk_ipv4_tuple orig;
-+
-+	u32 ib2;
-+
-+	struct mtk_ipv4_tuple new;
-+
-+	u16 timestamp;
-+	u16 _rsv0[3];
-+
-+	u32 udf_tsid;
-+
-+	struct mtk_foe_mac_info l2;
-+};
-+
-+struct mtk_foe_ipv4_dslite {
-+	struct mtk_ipv4_tuple ip4;
-+
-+	u32 tunnel_src_ip[4];
-+	u32 tunnel_dest_ip[4];
-+
-+	u8 flow_label[3];
-+	u8 priority;
-+
-+	u32 udf_tsid;
-+
-+	u32 ib2;
-+
-+	struct mtk_foe_mac_info l2;
-+};
-+
-+struct mtk_foe_ipv6 {
-+	u32 src_ip[4];
-+	u32 dest_ip[4];
-+
-+	union {
-+		struct {
-+			u8 protocol;
-+			u8 _pad[3]; /* fill with 0xa5a5a5 */
-+		}; /* 3-tuple */
-+		struct {
-+			u16 dest_port;
-+			u16 src_port;
-+		}; /* 5-tuple */
-+		u32 ports;
-+	};
-+
-+	u32 _rsv[3];
-+
-+	u32 udf;
-+
-+	u32 ib2;
-+	struct mtk_foe_mac_info l2;
-+};
-+
-+struct mtk_foe_ipv6_6rd {
-+	u32 src_ip[4];
-+	u32 dest_ip[4];
-+	u16 dest_port;
-+	u16 src_port;
-+
-+	u32 tunnel_src_ip;
-+	u32 tunnel_dest_ip;
-+
-+	u16 hdr_csum;
-+	u8 dscp;
-+	u8 ttl;
-+
-+	u8 flag;
-+	u8 pad;
-+	u8 per_flow_6rd_id;
-+	u8 pad2;
-+
-+	u32 ib2;
-+	struct mtk_foe_mac_info l2;
-+};
-+
-+struct mtk_foe_entry {
-+	u32 ib1;
-+
-+	union {
-+		struct mtk_foe_bridge bridge;
-+		struct mtk_foe_ipv4 ipv4;
-+		struct mtk_foe_ipv4_dslite dslite;
-+		struct mtk_foe_ipv6 ipv6;
-+		struct mtk_foe_ipv6_6rd ipv6_6rd;
-+		u32 data[19];
-+	};
-+};
-+
-+enum {
-+	MTK_PPE_CPU_REASON_TTL_EXCEEDED			= 0x02,
-+	MTK_PPE_CPU_REASON_OPTION_HEADER		= 0x03,
-+	MTK_PPE_CPU_REASON_NO_FLOW			= 0x07,
-+	MTK_PPE_CPU_REASON_IPV4_FRAG			= 0x08,
-+	MTK_PPE_CPU_REASON_IPV4_DSLITE_FRAG		= 0x09,
-+	MTK_PPE_CPU_REASON_IPV4_DSLITE_NO_TCP_UDP	= 0x0a,
-+	MTK_PPE_CPU_REASON_IPV6_6RD_NO_TCP_UDP		= 0x0b,
-+	MTK_PPE_CPU_REASON_TCP_FIN_SYN_RST		= 0x0c,
-+	MTK_PPE_CPU_REASON_UN_HIT			= 0x0d,
-+	MTK_PPE_CPU_REASON_HIT_UNBIND			= 0x0e,
-+	MTK_PPE_CPU_REASON_HIT_UNBIND_RATE_REACHED	= 0x0f,
-+	MTK_PPE_CPU_REASON_HIT_BIND_TCP_FIN		= 0x10,
-+	MTK_PPE_CPU_REASON_HIT_TTL_1			= 0x11,
-+	MTK_PPE_CPU_REASON_HIT_BIND_VLAN_VIOLATION	= 0x12,
-+	MTK_PPE_CPU_REASON_KEEPALIVE_UC_OLD_HDR		= 0x13,
-+	MTK_PPE_CPU_REASON_KEEPALIVE_MC_NEW_HDR		= 0x14,
-+	MTK_PPE_CPU_REASON_KEEPALIVE_DUP_OLD_HDR	= 0x15,
-+	MTK_PPE_CPU_REASON_HIT_BIND_FORCE_CPU		= 0x16,
-+	MTK_PPE_CPU_REASON_TUNNEL_OPTION_HEADER		= 0x17,
-+	MTK_PPE_CPU_REASON_MULTICAST_TO_CPU		= 0x18,
-+	MTK_PPE_CPU_REASON_MULTICAST_TO_GMAC1_CPU	= 0x19,
-+	MTK_PPE_CPU_REASON_HIT_PRE_BIND			= 0x1a,
-+	MTK_PPE_CPU_REASON_PACKET_SAMPLING		= 0x1b,
-+	MTK_PPE_CPU_REASON_EXCEED_MTU			= 0x1c,
-+	MTK_PPE_CPU_REASON_PPE_BYPASS			= 0x1e,
-+	MTK_PPE_CPU_REASON_INVALID			= 0x1f,
-+};
-+
-+struct mtk_ppe {
-+	struct device *dev;
-+	void __iomem *base;
-+	int version;
-+
-+	struct mtk_foe_entry *foe_table;
-+	dma_addr_t foe_phys;
-+
-+	void *acct_table;
-+};
-+
-+int mtk_ppe_init(struct mtk_ppe *ppe, struct device *dev, void __iomem *base,
-+		 int version);
-+int mtk_ppe_start(struct mtk_ppe *ppe);
-+int mtk_ppe_stop(struct mtk_ppe *ppe);
-+
-+static inline void
-+mtk_foe_entry_clear(struct mtk_ppe *ppe, u16 hash)
-+{
-+	ppe->foe_table[hash].ib1 = 0;
-+	dma_wmb();
-+}
-+
-+int mtk_foe_entry_prepare(struct mtk_foe_entry *entry, int type, int l4proto,
-+			  u8 pse_port, u8 *src_mac, u8 *dest_mac);
-+int mtk_foe_entry_set_ipv4_tuple(struct mtk_foe_entry *entry, bool orig,
-+				 __be32 src_addr, __be16 src_port,
-+				 __be32 dest_addr, __be16 dest_port);
-+int mtk_foe_entry_set_ipv6_tuple(struct mtk_foe_entry *entry,
-+				 __be32 *src_addr, __be16 src_port,
-+				 __be32 *dest_addr, __be16 dest_port);
-+int mtk_foe_entry_set_dsa(struct mtk_foe_entry *entry, int port);
-+int mtk_foe_entry_set_vlan(struct mtk_foe_entry *entry, int vid);
-+int mtk_foe_entry_set_pppoe(struct mtk_foe_entry *entry, int sid);
-+int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_foe_entry *entry,
-+			 u16 timestamp);
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_regs.h
-@@ -0,0 +1,144 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* Copyright (C) 2020 Felix Fietkau <nbd@nbd.name> */
-+
-+#ifndef __MTK_PPE_REGS_H
-+#define __MTK_PPE_REGS_H
-+
-+#define MTK_PPE_GLO_CFG				0x200
-+#define MTK_PPE_GLO_CFG_EN			BIT(0)
-+#define MTK_PPE_GLO_CFG_TSID_EN			BIT(1)
-+#define MTK_PPE_GLO_CFG_IP4_L4_CS_DROP		BIT(2)
-+#define MTK_PPE_GLO_CFG_IP4_CS_DROP		BIT(3)
-+#define MTK_PPE_GLO_CFG_TTL0_DROP		BIT(4)
-+#define MTK_PPE_GLO_CFG_PPE_BSWAP		BIT(5)
-+#define MTK_PPE_GLO_CFG_PSE_HASH_OFS		BIT(6)
-+#define MTK_PPE_GLO_CFG_MCAST_TB_EN		BIT(7)
-+#define MTK_PPE_GLO_CFG_FLOW_DROP_KA		BIT(8)
-+#define MTK_PPE_GLO_CFG_FLOW_DROP_UPDATE	BIT(9)
-+#define MTK_PPE_GLO_CFG_UDP_LITE_EN		BIT(10)
-+#define MTK_PPE_GLO_CFG_UDP_LEN_DROP		BIT(11)
-+#define MTK_PPE_GLO_CFG_MCAST_ENTRIES		GNEMASK(13, 12)
-+#define MTK_PPE_GLO_CFG_BUSY			BIT(31)
-+
-+#define MTK_PPE_FLOW_CFG			0x204
-+#define MTK_PPE_FLOW_CFG_IP4_TCP_FRAG		BIT(6)
-+#define MTK_PPE_FLOW_CFG_IP4_UDP_FRAG		BIT(7)
-+#define MTK_PPE_FLOW_CFG_IP6_3T_ROUTE		BIT(8)
-+#define MTK_PPE_FLOW_CFG_IP6_5T_ROUTE		BIT(9)
-+#define MTK_PPE_FLOW_CFG_IP6_6RD		BIT(10)
-+#define MTK_PPE_FLOW_CFG_IP4_NAT		BIT(12)
-+#define MTK_PPE_FLOW_CFG_IP4_NAPT		BIT(13)
-+#define MTK_PPE_FLOW_CFG_IP4_DSLITE		BIT(14)
-+#define MTK_PPE_FLOW_CFG_L2_BRIDGE		BIT(15)
-+#define MTK_PPE_FLOW_CFG_IP_PROTO_BLACKLIST	BIT(16)
-+#define MTK_PPE_FLOW_CFG_IP4_NAT_FRAG		BIT(17)
-+#define MTK_PPE_FLOW_CFG_IP4_HASH_FLOW_LABEL	BIT(18)
-+#define MTK_PPE_FLOW_CFG_IP4_HASH_GRE_KEY	BIT(19)
-+#define MTK_PPE_FLOW_CFG_IP6_HASH_GRE_KEY	BIT(20)
-+
-+#define MTK_PPE_IP_PROTO_CHK			0x208
-+#define MTK_PPE_IP_PROTO_CHK_IPV4		GENMASK(15, 0)
-+#define MTK_PPE_IP_PROTO_CHK_IPV6		GENMASK(31, 16)
-+
-+#define MTK_PPE_TB_CFG				0x21c
-+#define MTK_PPE_TB_CFG_ENTRY_NUM		GENMASK(2, 0)
-+#define MTK_PPE_TB_CFG_ENTRY_80B		BIT(3)
-+#define MTK_PPE_TB_CFG_SEARCH_MISS		GENMASK(5, 4)
-+#define MTK_PPE_TB_CFG_AGE_PREBIND		BIT(6)
-+#define MTK_PPE_TB_CFG_AGE_NON_L4		BIT(7)
-+#define MTK_PPE_TB_CFG_AGE_UNBIND		BIT(8)
-+#define MTK_PPE_TB_CFG_AGE_TCP			BIT(9)
-+#define MTK_PPE_TB_CFG_AGE_UDP			BIT(10)
-+#define MTK_PPE_TB_CFG_AGE_TCP_FIN		BIT(11)
-+#define MTK_PPE_TB_CFG_KEEPALIVE		GENMASK(13, 12)
-+#define MTK_PPE_TB_CFG_HASH_MODE		GENMASK(15, 14)
-+#define MTK_PPE_TB_CFG_SCAN_MODE		GENMASK(17, 16)
-+#define MTK_PPE_TB_CFG_HASH_DEBUG		GENMASK(19, 18)
-+
-+enum {
-+	MTK_PPE_SCAN_MODE_DISABLED,
-+	MTK_PPE_SCAN_MODE_CHECK_AGE,
-+	MTK_PPE_SCAN_MODE_KEEPALIVE_AGE,
-+};
-+
-+enum {
-+	MTK_PPE_KEEPALIVE_DISABLE,
-+	MTK_PPE_KEEPALIVE_UNICAST_CPU,
-+	MTK_PPE_KEEPALIVE_DUP_CPU = 3,
-+};
-+
-+enum {
-+	MTK_PPE_SEARCH_MISS_ACTION_DROP,
-+	MTK_PPE_SEARCH_MISS_ACTION_FORWARD = 2,
-+	MTK_PPE_SEARCH_MISS_ACTION_FORWARD_BUILD = 3,
-+};
-+
-+#define MTK_PPE_TB_BASE				0x220
-+
-+#define MTK_PPE_TB_USED				0x224
-+#define MTK_PPE_TB_USED_NUM			GENMASK(13, 0)
-+
-+#define MTK_PPE_BIND_RATE			0x228
-+#define MTK_PPE_BIND_RATE_BIND			GENMASK(15, 0)
-+#define MTK_PPE_BIND_RATE_PREBIND		GENMASK(31, 16)
-+
-+#define MTK_PPE_BIND_LIMIT0			0x22c
-+#define MTK_PPE_BIND_LIMIT0_QUARTER		GENMASK(13, 0)
-+#define MTK_PPE_BIND_LIMIT0_HALF		GENMASK(29, 16)
-+
-+#define MTK_PPE_BIND_LIMIT1			0x230
-+#define MTK_PPE_BIND_LIMIT1_FULL		GENMASK(13, 0)
-+#define MTK_PPE_BIND_LIMIT1_NON_L4		GENMASK(23, 16)
-+
-+#define MTK_PPE_KEEPALIVE			0x234
-+#define MTK_PPE_KEEPALIVE_TIME			GENMASK(15, 0)
-+#define MTK_PPE_KEEPALIVE_TIME_TCP		GENMASK(23, 16)
-+#define MTK_PPE_KEEPALIVE_TIME_UDP		GENMASK(31, 24)
-+
-+#define MTK_PPE_UNBIND_AGE			0x238
-+#define MTK_PPE_UNBIND_AGE_MIN_PACKETS		GENMASK(31, 16)
-+#define MTK_PPE_UNBIND_AGE_DELTA		GENMASK(7, 0)
-+
-+#define MTK_PPE_BIND_AGE0			0x23c
-+#define MTK_PPE_BIND_AGE0_DELTA_NON_L4		GENMASK(30, 16)
-+#define MTK_PPE_BIND_AGE0_DELTA_UDP		GENMASK(14, 0)
-+
-+#define MTK_PPE_BIND_AGE1			0x240
-+#define MTK_PPE_BIND_AGE1_DELTA_TCP_FIN		GENMASK(30, 16)
-+#define MTK_PPE_BIND_AGE1_DELTA_TCP		GENMASK(14, 0)
-+
-+#define MTK_PPE_HASH_SEED			0x244
-+
-+#define MTK_PPE_DEFAULT_CPU_PORT		0x248
-+#define MTK_PPE_DEFAULT_CPU_PORT_MASK(_n)	(GENMASK(2, 0) << ((_n) * 4))
-+
-+#define MTK_PPE_MTU_DROP			0x308
-+
-+#define MTK_PPE_VLAN_MTU0			0x30c
-+#define MTK_PPE_VLAN_MTU0_NONE			GENMASK(13, 0)
-+#define MTK_PPE_VLAN_MTU0_1TAG			GENMASK(29, 16)
-+
-+#define MTK_PPE_VLAN_MTU1			0x310
-+#define MTK_PPE_VLAN_MTU1_2TAG			GENMASK(13, 0)
-+#define MTK_PPE_VLAN_MTU1_3TAG			GENMASK(29, 16)
-+
-+#define MTK_PPE_VPM_TPID			0x318
-+
-+#define MTK_PPE_CACHE_CTL			0x320
-+#define MTK_PPE_CACHE_CTL_EN			BIT(0)
-+#define MTK_PPE_CACHE_CTL_LOCK_CLR		BIT(4)
-+#define MTK_PPE_CACHE_CTL_REQ			BIT(8)
-+#define MTK_PPE_CACHE_CTL_CLEAR			BIT(9)
-+#define MTK_PPE_CACHE_CTL_CMD			GENMASK(13, 12)
-+
-+#define MTK_PPE_MIB_CFG				0x334
-+#define MTK_PPE_MIB_CFG_EN			BIT(0)
-+#define MTK_PPE_MIB_CFG_RD_CLR			BIT(1)
-+
-+#define MTK_PPE_MIB_TB_BASE			0x338
-+
-+#define MTK_PPE_MIB_CACHE_CTL			0x350
-+#define MTK_PPE_MIB_CACHE_CTL_EN		BIT(0)
-+#define MTK_PPE_MIB_CACHE_CTL_FLUSH		BIT(2)
-+
-+#endif
diff --git a/target/linux/generic/pending-5.4/770-16-net-ethernet-mediatek-mtk_eth_soc-add-flow-offloadin.patch b/target/linux/generic/pending-5.4/770-16-net-ethernet-mediatek-mtk_eth_soc-add-flow-offloadin.patch
deleted file mode 100644
index de337026d3..0000000000
--- a/target/linux/generic/pending-5.4/770-16-net-ethernet-mediatek-mtk_eth_soc-add-flow-offloadin.patch
+++ /dev/null
@@ -1,401 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 11 Oct 2020 22:28:32 +0200
-Subject: [PATCH] net: ethernet: mediatek: mtk_eth_soc: add flow offloading
- support
-
-Only supports IPv4 for now
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- create mode 100644 drivers/net/ethernet/mediatek/mtk_offload.c
- create mode 100644 drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c
-
---- a/drivers/net/ethernet/mediatek/Makefile
-+++ b/drivers/net/ethernet/mediatek/Makefile
-@@ -4,4 +4,4 @@
- #
- 
- obj-$(CONFIG_NET_MEDIATEK_SOC)                 += mtk_eth.o
--mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o mtk_ppe.o
-+mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o mtk_ppe.o mtk_ppe_debugfs.o mtk_offload.o
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -20,6 +20,8 @@
- #include <linux/pinctrl/devinfo.h>
- #include <linux/phylink.h>
- #include <linux/jhash.h>
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_flow_table.h>
- #include <net/dsa.h>
- 
- #include "mtk_eth_soc.h"
-@@ -1348,8 +1350,12 @@ static int mtk_poll_rx(struct napi_struc
- 		    (trxd.rxd2 & RX_DMA_VTAG))
- 			__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
- 					       RX_DMA_VID(trxd.rxd3));
--		skb_record_rx_queue(skb, 0);
--		napi_gro_receive(napi, skb);
-+		if (mtk_offload_check_rx(eth, skb, trxd.rxd4) == 0) {
-+			skb_record_rx_queue(skb, 0);
-+			napi_gro_receive(napi, skb);
-+		} else {
-+			dev_kfree_skb(skb);
-+		}
- 
- skip_rx:
- 		ring->data[idx] = new_data;
-@@ -2879,6 +2885,25 @@ static int mtk_set_rxnfc(struct net_devi
- 	return ret;
- }
- 
-+static int
-+mtk_flow_offload(enum flow_offload_type type, struct flow_offload *flow,
-+		struct flow_offload_hw_path *src,
-+		struct flow_offload_hw_path *dest)
-+{
-+	struct mtk_mac *mac = netdev_priv(src->dev);
-+	struct mtk_eth *eth = mac->hw;
-+
-+	if (!eth->soc->offload_version)
-+		return -EINVAL;
-+
-+	if (src->dev->base_addr != dest->dev->base_addr)
-+		return -EINVAL;
-+
-+	mac = netdev_priv(src->dev);
-+
-+	return mtk_flow_offload_add(eth, type, flow, src, dest);
-+}
-+
- static const struct ethtool_ops mtk_ethtool_ops = {
- 	.get_link_ksettings	= mtk_get_link_ksettings,
- 	.set_link_ksettings	= mtk_set_link_ksettings,
-@@ -2910,6 +2935,7 @@ static const struct net_device_ops mtk_n
- #ifdef CONFIG_NET_POLL_CONTROLLER
- 	.ndo_poll_controller	= mtk_poll_controller,
- #endif
-+	.ndo_flow_offload       = mtk_flow_offload,
- };
- 
- static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
-@@ -3175,6 +3201,10 @@ static int mtk_probe(struct platform_dev
- 				   eth->base + MTK_ETH_PPE_BASE, 2);
- 		if (err)
- 			goto err_free_dev;
-+
-+		err = mtk_flow_offload_init(eth);
-+		if (err)
-+			goto err_free_dev;
- 	}
- 
- 	for (i = 0; i < MTK_MAX_DEVS; i++) {
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -949,6 +949,7 @@ struct mtk_eth {
- 	int				ip_align;
- 
- 	struct mtk_ppe			ppe;
-+	struct flow_offload __rcu       **foe_flow_table;
- };
- 
- /* struct mtk_mac -	the structure that holds the info about the MACs of the
-@@ -993,4 +994,12 @@ int mtk_gmac_sgmii_path_setup(struct mtk
- int mtk_gmac_gephy_path_setup(struct mtk_eth *eth, int mac_id);
- int mtk_gmac_rgmii_path_setup(struct mtk_eth *eth, int mac_id);
- 
-+int mtk_flow_offload_init(struct mtk_eth *eth);
-+int mtk_flow_offload_add(struct mtk_eth *eth,
-+			 enum flow_offload_type type,
-+			 struct flow_offload *flow,
-+			 struct flow_offload_hw_path *src,
-+			 struct flow_offload_hw_path *dest);
-+int mtk_offload_check_rx(struct mtk_eth *eth, struct sk_buff *skb, u32 rxd4);
-+
- #endif /* MTK_ETH_H */
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_offload.c
-@@ -0,0 +1,146 @@
-+/*   This program is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU General Public License as published by
-+ *   the Free Software Foundation; version 2 of the License
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ *
-+ *   Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ */
-+
-+#include <net/netfilter/nf_flow_table.h>
-+#include "mtk_eth_soc.h"
-+
-+static int
-+mtk_offload_prepare_v4(struct mtk_eth *eth, struct mtk_foe_entry *entry,
-+		       struct flow_offload_tuple *s_tuple,
-+		       struct flow_offload_tuple *d_tuple,
-+		       struct flow_offload_hw_path *src,
-+		       struct flow_offload_hw_path *dest)
-+{
-+	int dest_port = 1;
-+
-+	if (dest->dev == eth->netdev[1])
-+	    dest_port = 2;
-+
-+	mtk_foe_entry_prepare(entry, MTK_PPE_PKT_TYPE_IPV4_HNAPT, s_tuple->l4proto,
-+			      dest_port, dest->eth_src, dest->eth_dest);
-+	mtk_foe_entry_set_ipv4_tuple(entry, false,
-+				     s_tuple->src_v4.s_addr, s_tuple->src_port,
-+				     s_tuple->dst_v4.s_addr, s_tuple->dst_port);
-+	mtk_foe_entry_set_ipv4_tuple(entry, true,
-+				     d_tuple->dst_v4.s_addr, d_tuple->dst_port,
-+				     d_tuple->src_v4.s_addr, d_tuple->src_port);
-+
-+	if (dest->flags & FLOW_OFFLOAD_PATH_PPPOE)
-+		mtk_foe_entry_set_pppoe(entry, dest->pppoe_sid);
-+
-+	if (dest->flags & FLOW_OFFLOAD_PATH_VLAN)
-+		mtk_foe_entry_set_vlan(entry, dest->vlan_id);
-+
-+	if (dest->flags & FLOW_OFFLOAD_PATH_DSA)
-+		mtk_foe_entry_set_dsa(entry, dest->dsa_port);
-+
-+	return 0;
-+}
-+
-+int mtk_flow_offload_add(struct mtk_eth *eth,
-+			 enum flow_offload_type type,
-+			 struct flow_offload *flow,
-+			 struct flow_offload_hw_path *src,
-+			 struct flow_offload_hw_path *dest)
-+{
-+	struct flow_offload_tuple *otuple = &flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple;
-+	struct flow_offload_tuple *rtuple = &flow->tuplehash[FLOW_OFFLOAD_DIR_REPLY].tuple;
-+	struct mtk_foe_entry orig, reply;
-+	u32 ohash, rhash, timestamp;
-+
-+	if (otuple->l4proto != IPPROTO_TCP && otuple->l4proto != IPPROTO_UDP)
-+		return -EINVAL;
-+
-+	if (type == FLOW_OFFLOAD_DEL) {
-+		ohash = (unsigned long)flow->priv;
-+		rhash = ohash >> 16;
-+		ohash &= 0xffff;
-+		mtk_foe_entry_clear(&eth->ppe, ohash);
-+		mtk_foe_entry_clear(&eth->ppe, rhash);
-+		rcu_assign_pointer(eth->foe_flow_table[ohash], NULL);
-+		rcu_assign_pointer(eth->foe_flow_table[rhash], NULL);
-+		synchronize_rcu();
-+
-+		return 0;
-+	}
-+
-+	switch (otuple->l3proto) {
-+	case AF_INET:
-+		if (mtk_offload_prepare_v4(eth, &orig, otuple, rtuple, src, dest) ||
-+		    mtk_offload_prepare_v4(eth, &reply, rtuple, otuple, dest, src))
-+			return -EINVAL;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	timestamp = mtk_r32(eth, 0x0010);
-+
-+	ohash = mtk_foe_entry_commit(&eth->ppe, &orig, timestamp);
-+	if (ohash < 0)
-+		return -EINVAL;
-+
-+	rhash = mtk_foe_entry_commit(&eth->ppe, &reply, timestamp);
-+	if (rhash < 0) {
-+		mtk_foe_entry_clear(&eth->ppe, ohash);
-+		return -EINVAL;
-+	}
-+
-+	rcu_assign_pointer(eth->foe_flow_table[ohash], flow);
-+	rcu_assign_pointer(eth->foe_flow_table[rhash], flow);
-+
-+	ohash |= rhash << 16;
-+	flow->priv = (void *)(unsigned long)ohash;
-+
-+	return 0;
-+}
-+
-+static void mtk_offload_keepalive(struct mtk_eth *eth, unsigned int hash)
-+{
-+	struct flow_offload *flow;
-+
-+	rcu_read_lock();
-+	flow = rcu_dereference(eth->foe_flow_table[hash]);
-+	if (flow)
-+		flow->timeout = jiffies + 30 * HZ;
-+	rcu_read_unlock();
-+}
-+
-+int mtk_offload_check_rx(struct mtk_eth *eth, struct sk_buff *skb, u32 rxd4)
-+{
-+	unsigned int hash;
-+
-+	switch (FIELD_GET(MTK_RXD4_PPE_CPU_REASON, rxd4)) {
-+	case MTK_PPE_CPU_REASON_KEEPALIVE_UC_OLD_HDR:
-+	case MTK_PPE_CPU_REASON_KEEPALIVE_MC_NEW_HDR:
-+	case MTK_PPE_CPU_REASON_KEEPALIVE_DUP_OLD_HDR:
-+		hash = FIELD_GET(MTK_RXD4_FOE_ENTRY, rxd4);
-+		mtk_offload_keepalive(eth, hash);
-+		return -1;
-+	case MTK_PPE_CPU_REASON_PACKET_SAMPLING:
-+		return -1;
-+	default:
-+		return 0;
-+	}
-+}
-+
-+int mtk_flow_offload_init(struct mtk_eth *eth)
-+{
-+	eth->foe_flow_table = devm_kcalloc(eth->dev, MTK_PPE_ENTRIES,
-+					   sizeof(*eth->foe_flow_table),
-+					   GFP_KERNEL);
-+
-+	if (!eth->foe_flow_table)
-+		return -ENOMEM;
-+
-+	return 0;
-+}
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -375,6 +375,8 @@ int mtk_ppe_init(struct mtk_ppe *ppe, st
- 
- 	ppe->foe_table = foe;
- 
-+	mtk_ppe_debugfs_init(ppe);
-+
- 	return 0;
- }
- 
---- a/drivers/net/ethernet/mediatek/mtk_ppe.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -271,4 +271,7 @@ int mtk_foe_entry_set_pppoe(struct mtk_f
- int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_foe_entry *entry,
- 			 u16 timestamp);
- 
-+/* internal */
-+int mtk_ppe_debugfs_init(struct mtk_ppe *ppe);
-+
- #endif
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c
-@@ -0,0 +1,114 @@
-+/*   This program is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU General Public License as published by
-+ *   the Free Software Foundation; version 2 of the License
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ *
-+ *   Copyright (C) 2014-2016 Sean Wang <sean.wang@mediatek.com>
-+ *   Copyright (C) 2016-2017 John Crispin <blogic@openwrt.org>
-+ *   Copyright (C) 2020 Felix Fietkau <nbd@nbd.name>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/debugfs.h>
-+#include "mtk_eth_soc.h"
-+
-+static const char *mtk_foe_entry_state_str[] = {
-+	"INVALID",
-+	"UNBIND",
-+	"BIND",
-+	"FIN"
-+};
-+
-+static const char *mtk_foe_packet_type_str[] = {
-+	"IPV4_HNAPT",
-+	"IPV4_HNAT",
-+	"IPV6_1T_ROUTE",
-+	"IPV4_DSLITE",
-+	"IPV6_3T_ROUTE",
-+	"IPV6_5T_ROUTE",
-+	"IPV6_6RD",
-+};
-+
-+#define es(entry)		(mtk_foe_entry_state_str[FIELD_GET(MTK_FOE_IB1_STATE, entry->ib1)])
-+//#define ei(entry, end)		(MTK_PPE_TBL_SZ - (int)(end - entry))
-+#define pt(entry)		(mtk_foe_packet_type_str[FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1)])
-+
-+static int mtk_ppe_debugfs_foe_show(struct seq_file *m, void *private)
-+{
-+	struct mtk_ppe *ppe = m->private;
-+	int i, count;
-+
-+	for (i = 0, count = 0; i < MTK_PPE_ENTRIES; i++) {
-+		struct mtk_foe_entry *entry = &ppe->foe_table[i];
-+
-+		if (!FIELD_GET(MTK_FOE_IB1_STATE, entry->ib1))
-+			continue;
-+
-+		if (FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1) ==
-+		    MTK_PPE_PKT_TYPE_IPV4_HNAPT) {
-+			struct mtk_foe_ipv4 *ip4 = &entry->ipv4;
-+			struct mtk_foe_mac_info *l2 = &ip4->l2;
-+
-+			__be32 saddr = htonl(ip4->orig.src_ip);
-+			__be32 daddr = htonl(ip4->orig.dest_ip);
-+			__be32 nsaddr = htonl(ip4->new.src_ip);
-+			__be32 ndaddr = htonl(ip4->new.dest_ip);
-+			unsigned char h_dest[ETH_ALEN];
-+			unsigned char h_source[ETH_ALEN];
-+
-+			*((__be32 *) h_source) = htonl(l2->src_mac_hi);
-+			*((__be16*) &h_source[4]) = htons(l2->src_mac_lo);
-+			*((__be32*) h_dest) = htonl(l2->dest_mac_hi);
-+			*((__be16*) &h_dest[4]) = htons(l2->dest_mac_lo);
-+			seq_printf(m,
-+				   "(%x)0x%05x|state=%s|type=%s|"
-+				   "%pI4:%d->%pI4:%d=>%pI4:%d->%pI4:%d|%pM=>%pM|"
-+				   "etype=0x%04x|info1=0x%x|info2=0x%x|"
-+				   "vlan1=%d|vlan2=%d\n",
-+				   count, i, es(entry), pt(entry),
-+				   &saddr, ip4->orig.src_port,
-+				   &daddr, ip4->orig.dest_port,
-+				   &nsaddr, ip4->new.src_port,
-+				   &ndaddr, ip4->new.dest_port,
-+				   h_source, h_dest,
-+				   ntohs(l2->etype),
-+				   entry->ib1,
-+				   ip4->ib2,
-+				   l2->vlan1,
-+				   l2->vlan2);
-+			count++;
-+		} else
-+			seq_printf(m, "0x%05x state=%s\n", count, es(entry));
-+	}
-+
-+	return 0;
-+}
-+
-+static int mtk_ppe_debugfs_foe_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, mtk_ppe_debugfs_foe_show, inode->i_private);
-+}
-+
-+static const struct file_operations mtk_ppe_debugfs_foe_fops = {
-+	.open = mtk_ppe_debugfs_foe_open,
-+	.read = seq_read,
-+	.llseek = seq_lseek,
-+	.release = single_release,
-+};
-+
-+int mtk_ppe_debugfs_init(struct mtk_ppe *ppe)
-+{
-+	struct dentry *root;
-+
-+	root = debugfs_create_dir("mtk_ppe", NULL);
-+	if (!root)
-+		return -ENOMEM;
-+
-+	debugfs_create_file("entries", S_IRUGO, root, ppe, &mtk_ppe_debugfs_foe_fops);
-+
-+	return 0;
-+}
diff --git a/target/linux/generic/pending-5.4/780-ARM-kirkwood-add-missing-linux-if_ether.h-for-ETH_AL.patch b/target/linux/generic/pending-5.4/780-ARM-kirkwood-add-missing-linux-if_ether.h-for-ETH_AL.patch
deleted file mode 100644
index fcf7892c04..0000000000
--- a/target/linux/generic/pending-5.4/780-ARM-kirkwood-add-missing-linux-if_ether.h-for-ETH_AL.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From patchwork Thu Aug  5 22:23:30 2021
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 12422209
-Date: Thu, 5 Aug 2021 23:23:30 +0100
-From: Daniel Golle <daniel@makrotopia.org>
-To: linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
- linux-kernel@vger.kernel.org
-Cc: "David S. Miller" <davem@davemloft.net>, Andrew Lunn <andrew@lunn.ch>,
- Michael Walle <michael@walle.cc>
-Subject: [PATCH] ARM: kirkwood: add missing <linux/if_ether.h> for ETH_ALEN
-Message-ID: <YQxk4jrbm31NM1US@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-X-BeenThere: linux-arm-kernel@lists.infradead.org
-X-Mailman-Version: 2.1.34
-Precedence: list
-List-Id: <linux-arm-kernel.lists.infradead.org>
-List-Archive: <http://lists.infradead.org/pipermail/linux-arm-kernel/>
-Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org>
-
-After commit 83216e3988cd1 ("of: net: pass the dst buffer to
-of_get_mac_address()") build fails for kirkwood as ETH_ALEN is not
-defined.
-
-arch/arm/mach-mvebu/kirkwood.c: In function 'kirkwood_dt_eth_fixup':
-arch/arm/mach-mvebu/kirkwood.c:87:13: error: 'ETH_ALEN' undeclared (first use in this function); did you mean 'ESTALE'?
-   u8 tmpmac[ETH_ALEN];
-             ^~~~~~~~
-             ESTALE
-arch/arm/mach-mvebu/kirkwood.c:87:13: note: each undeclared identifier is reported only once for each function it appears in
-arch/arm/mach-mvebu/kirkwood.c:87:6: warning: unused variable 'tmpmac' [-Wunused-variable]
-   u8 tmpmac[ETH_ALEN];
-      ^~~~~~
-make[5]: *** [scripts/Makefile.build:262: arch/arm/mach-mvebu/kirkwood.o] Error 1
-make[5]: *** Waiting for unfinished jobs....
-
-Add missing #include <linux/if_ether.h> to fix this.
-
-Cc: David S. Miller <davem@davemloft.net>
-Cc: Andrew Lunn <andrew@lunn.ch>
-Cc: Michael Walle <michael@walle.cc>
-Reported-by: https://buildbot.openwrt.org/master/images/#/builders/56/builds/220/steps/44/logs/stdio
-Fixes: 83216e3988cd1 ("of: net: pass the dst buffer to of_get_mac_address()")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- arch/arm/mach-mvebu/kirkwood.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/mach-mvebu/kirkwood.c
-+++ b/arch/arm/mach-mvebu/kirkwood.c
-@@ -14,6 +14,7 @@
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/mbus.h>
-+#include <linux/if_ether.h>
- #include <linux/of.h>
- #include <linux/of_address.h>
- #include <linux/of_net.h>
diff --git a/target/linux/generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch b/target/linux/generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
deleted file mode 100644
index 511a9f7555..0000000000
--- a/target/linux/generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] bcma: get SoC device struct & copy its DMA params to the
- subdevices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-For bus devices to be fully usable it's required to set their DMA
-parameters.
-
-For years it has been missing and remained unnoticed because of
-mips_dma_alloc_coherent() silently handling the empty coherent_dma_mask.
-Kernel 4.19 came with a lot of DMA changes and caused a regression on
-the bcm47xx. Starting with the commit f8c55dc6e828 ("MIPS: use generic
-dma noncoherent ops for simple noncoherent platforms") DMA coherent
-allocations just fail. Example:
-[    1.114914] bgmac_bcma bcma0:2: Allocation of TX ring 0x200 failed
-[    1.121215] bgmac_bcma bcma0:2: Unable to alloc memory for DMA
-[    1.127626] bgmac_bcma: probe of bcma0:2 failed with error -12
-[    1.133838] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
-
-This change fixes above regression in addition to the MIPS bcm47xx
-commit 321c46b91550 ("MIPS: BCM47XX: Setup struct device for the SoC").
-
-It also fixes another *old* GPIO regression caused by a parent pointing
-to the NULL:
-[    0.157054] missing gpiochip .dev parent pointer
-[    0.157287] bcma: bus0: Error registering GPIO driver: -22
-introduced by the commit 74f4e0cc6108 ("bcma: switch GPIO portions to
-use GPIOLIB_IRQCHIP").
-
-Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms")
-Fixes: 74f4e0cc6108 ("bcma: switch GPIO portions to use GPIOLIB_IRQCHIP")
-Cc: linux-mips@linux-mips.org
-Cc: Christoph Hellwig <hch@lst.de>
-Cc: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/bcma/host_soc.c
-+++ b/drivers/bcma/host_soc.c
-@@ -191,6 +191,8 @@ int __init bcma_host_soc_init(struct bcm
- 	struct bcma_bus *bus = &soc->bus;
- 	int err;
- 
-+	bus->dev = soc->dev;
-+
- 	/* Scan bus and initialize it */
- 	err = bcma_bus_early_register(bus);
- 	if (err)
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -241,8 +241,10 @@ void bcma_prepare_core(struct bcma_bus *
- 	core->dev.bus = &bcma_bus_type;
- 	dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
- 	core->dev.parent = bus->dev;
--	if (bus->dev)
-+	if (bus->dev) {
- 		bcma_of_fill_device(bus->dev, core);
-+		dma_coerce_mask_and_coherent(&core->dev, bus->dev->coherent_dma_mask);
-+	}
- 
- 	switch (bus->hosttype) {
- 	case BCMA_HOSTTYPE_PCI:
diff --git a/target/linux/generic/pending-5.4/810-pci_disable_common_quirks.patch b/target/linux/generic/pending-5.4/810-pci_disable_common_quirks.patch
deleted file mode 100644
index 5aea055b72..0000000000
--- a/target/linux/generic/pending-5.4/810-pci_disable_common_quirks.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: debloat: add kernel config option to disabling common PCI quirks
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/pci/Kconfig  | 6 ++++++
- drivers/pci/quirks.c | 6 ++++++
- 2 files changed, 12 insertions(+)
-
---- a/drivers/pci/Kconfig
-+++ b/drivers/pci/Kconfig
-@@ -115,6 +115,13 @@ config XEN_PCIDEV_FRONTEND
-           The PCI device frontend driver allows the kernel to import arbitrary
-           PCI devices from a PCI backend to support PCI driver domains.
- 
-+config PCI_DISABLE_COMMON_QUIRKS
-+	bool "PCI disable common quirks"
-+	depends on PCI
-+	help
-+	  If you don't know what to do here, say N.
-+
-+
- config PCI_ATS
- 	bool
- 
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -206,6 +206,7 @@ static void quirk_mmio_always_on(struct
- DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
- 				PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- /*
-  * The Mellanox Tavor device gives false positive parity errors.  Mark this
-  * device with a broken_parity_status to allow PCI scanning code to "skip"
-@@ -3323,6 +3324,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
- 
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
- /*
-  * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
-  * To work around this, query the size it should be configured to by the
-@@ -3348,6 +3351,8 @@ static void quirk_intel_ntb(struct pci_d
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- /*
-  * Some BIOS implementations leave the Intel GPU interrupts enabled, even
-  * though no one is handling them (e.g., if the i915 driver is never
-@@ -3386,6 +3391,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
- 
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
- /*
-  * PCI devices which are on Intel chips can skip the 10ms delay
-  * before entering D3 mode.
diff --git a/target/linux/generic/pending-5.4/811-pci_disable_usb_common_quirks.patch b/target/linux/generic/pending-5.4/811-pci_disable_usb_common_quirks.patch
deleted file mode 100644
index 6e4584c8a1..0000000000
--- a/target/linux/generic/pending-5.4/811-pci_disable_usb_common_quirks.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: debloat: disable common USB quirks
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++
- drivers/usb/host/pci-quirks.h | 18 +++++++++++++++++-
- include/linux/usb/hcd.h       |  7 +++++++
- 3 files changed, 40 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/host/pci-quirks.c
-+++ b/drivers/usb/host/pci-quirks.c
-@@ -125,6 +125,8 @@ struct amd_chipset_type {
- 	u8 rev;
- };
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- static struct amd_chipset_info {
- 	struct pci_dev	*nb_dev;
- 	struct pci_dev	*smbus_dev;
-@@ -630,6 +632,10 @@ bool usb_amd_pt_check_port(struct device
- }
- EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
- 
-+#endif /* CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
-+#if IS_ENABLED(CONFIG_USB_UHCI_HCD)
-+
- /*
-  * Make sure the controller is completely inactive, unable to
-  * generate interrupts or do DMA.
-@@ -709,8 +715,17 @@ reset_needed:
- 	uhci_reset_hc(pdev, base);
- 	return 1;
- }
-+#else
-+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
-+{
-+	return 0;
-+}
-+
-+#endif
- EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
- {
- 	u16 cmd;
-@@ -1271,3 +1286,4 @@ static void quirk_usb_early_handoff(stru
- }
- DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
- 			PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
-+#endif
---- a/drivers/usb/host/pci-quirks.h
-+++ b/drivers/usb/host/pci-quirks.h
-@@ -5,6 +5,9 @@
- #ifdef CONFIG_USB_PCI
- void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
- int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-+#endif  /* CONFIG_USB_PCI */
-+
-+#if defined(CONFIG_USB_PCI) && !defined(CONFIG_PCI_DISABLE_COMMON_QUIRKS)
- int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
- bool usb_amd_hang_symptom_quirk(void);
- bool usb_amd_prefetch_quirk(void);
-@@ -19,6 +22,18 @@ void sb800_prefetch(struct device *dev,
- bool usb_amd_pt_check_port(struct device *device, int port);
- #else
- struct pci_dev;
-+static inline int usb_amd_quirk_pll_check(void)
-+{
-+	return 0;
-+}
-+static inline bool usb_amd_hang_symptom_quirk(void)
-+{
-+	return false;
-+}
-+static inline bool usb_amd_prefetch_quirk(void)
-+{
-+	return false;
-+}
- static inline void usb_amd_quirk_pll_disable(void) {}
- static inline void usb_amd_quirk_pll_enable(void) {}
- static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
-@@ -29,6 +44,11 @@ static inline bool usb_amd_pt_check_port
- {
- 	return false;
- }
-+static inline void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) {}
-+static inline bool usb_xhci_needs_pci_reset(struct pci_dev *pdev)
-+{
-+	return false;
-+}
- #endif  /* CONFIG_USB_PCI */
- 
- #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
---- a/include/linux/usb/hcd.h
-+++ b/include/linux/usb/hcd.h
-@@ -483,7 +483,14 @@ extern int usb_hcd_pci_probe(struct pci_
- extern void usb_hcd_pci_remove(struct pci_dev *dev);
- extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
-+#else
-+static inline int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev)
-+{
-+	return 0;
-+}
-+#endif
- 
- #ifdef CONFIG_PM
- extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
diff --git a/target/linux/generic/pending-5.4/820-libata-Assign-OF-node-to-the-SCSI-device.patch b/target/linux/generic/pending-5.4/820-libata-Assign-OF-node-to-the-SCSI-device.patch
deleted file mode 100644
index c4cbaaa777..0000000000
--- a/target/linux/generic/pending-5.4/820-libata-Assign-OF-node-to-the-SCSI-device.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 43a93893eb33e996836b99fb3e1f7300c0132a51 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Tue, 31 Dec 2019 18:15:33 +0100
-Subject: [PATCH 5/7] libata: Assign OF node to the SCSI device
-
-When we spawn a SCSI device from an ATA device in libata-scsi
-the SCSI device had no relation to the device tree.
-
-The DT binding allows us to define port nodes under a
-PATA (IDE) or SATA host controller, so we can have proper device
-nodes for these devices.
-
-If OF is enabled, walk the children of the host controller node
-to see if there is a valid device tree node to assign. The reg
-is used to match to ID 0 for the master device and ID 1 for the
-slave device.
-
-The corresponding device tree bindings have been accepted by
-the device tree maintainers.
-
-Cc: Chris Healy <cphealy@gmail.com>
-Cc: Martin K. Petersen <martin.petersen@oracle.com>
-Cc: Bart Van Assche <bvanassche@acm.org>
-Cc: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
-ChangeLog v1->v2:
-- Use dev_dbg() for the debug print
-- return immediately after finding a matching OF node
----
- drivers/ata/libata-scsi.c | 30 ++++++++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
---- a/drivers/ata/libata-scsi.c
-+++ b/drivers/ata/libata-scsi.c
-@@ -35,6 +35,7 @@
- #include <linux/suspend.h>
- #include <asm/unaligned.h>
- #include <linux/ioprio.h>
-+#include <linux/of.h>
- 
- #include "libata.h"
- #include "libata-transport.h"
-@@ -4590,6 +4591,34 @@ int ata_scsi_add_hosts(struct ata_host *
- 	return rc;
- }
- 
-+#ifdef CONFIG_OF
-+static void ata_scsi_assign_ofnode(struct ata_device *dev, struct ata_port *ap)
-+{
-+	struct scsi_device *sdev = dev->sdev;
-+	struct device *d = ap->host->dev;
-+	struct device_node *np = d->of_node;
-+	struct device_node *child;
-+
-+	for_each_available_child_of_node(np, child) {
-+		int ret;
-+		u32 val;
-+
-+		ret = of_property_read_u32(child, "reg", &val);
-+		if (ret)
-+			continue;
-+		if (val == dev->devno) {
-+			dev_dbg(d, "found matching device node\n");
-+			sdev->sdev_gendev.of_node = child;
-+			return;
-+		}
-+	}
-+}
-+#else
-+static void ata_scsi_assign_ofnode(struct ata_device *dev, struct ata_port *ap)
-+{
-+}
-+#endif
-+
- void ata_scsi_scan_host(struct ata_port *ap, int sync)
- {
- 	int tries = 5;
-@@ -4615,6 +4644,7 @@ void ata_scsi_scan_host(struct ata_port
- 						 NULL);
- 			if (!IS_ERR(sdev)) {
- 				dev->sdev = sdev;
-+				ata_scsi_assign_ofnode(dev, ap);
- 				scsi_device_put(sdev);
- 			} else {
- 				dev->sdev = NULL;
diff --git a/target/linux/generic/pending-5.4/834-ledtrig-libata.patch b/target/linux/generic/pending-5.4/834-ledtrig-libata.patch
deleted file mode 100644
index 2c876ae55e..0000000000
--- a/target/linux/generic/pending-5.4/834-ledtrig-libata.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: libata: add ledtrig support
-
-This adds a LED trigger for each ATA port indicating disk activity.
-
-As this is needed only on specific platforms (NAS SoCs and such),
-these platforms should define ARCH_WANTS_LIBATA_LEDS if there
-are boards with LED(s) intended to indicate ATA disk activity and
-need the OS to take care of that.
-In that way, if not selected, LED trigger support not will be
-included in libata-core and both, codepaths and structures remain
-untouched.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/ata/Kconfig       | 16 ++++++++++++++++
- drivers/ata/libata-core.c | 41 +++++++++++++++++++++++++++++++++++++++++
- include/linux/libata.h    |  9 +++++++++
- 3 files changed, 66 insertions(+)
-
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -45,6 +45,22 @@ config ATA_VERBOSE_ERROR
- 
- 	  If unsure, say Y.
- 
-+config ARCH_WANT_LIBATA_LEDS
-+	bool
-+
-+config ATA_LEDS
-+	bool "support ATA port LED triggers"
-+	depends on ARCH_WANT_LIBATA_LEDS
-+	select NEW_LEDS
-+	select LEDS_CLASS
-+	select LEDS_TRIGGERS
-+	default y
-+	help
-+	  This option adds a LED trigger for each registered ATA port.
-+	  It is used to drive disk activity leds connected via GPIO.
-+
-+	  If unsure, say N.
-+
- config ATA_ACPI
- 	bool "ATA ACPI Support"
- 	depends on ACPI
---- a/drivers/ata/libata-core.c
-+++ b/drivers/ata/libata-core.c
-@@ -714,6 +714,19 @@ u64 ata_tf_read_block(const struct ata_t
- 	return block;
- }
- 
-+#ifdef CONFIG_ATA_LEDS
-+#define LIBATA_BLINK_DELAY 20 /* ms */
-+static inline void ata_led_act(struct ata_port *ap)
-+{
-+	unsigned long led_delay = LIBATA_BLINK_DELAY;
-+
-+	if (unlikely(!ap->ledtrig))
-+		return;
-+
-+	led_trigger_blink_oneshot(ap->ledtrig, &led_delay, &led_delay, 0);
-+}
-+#endif
-+
- /**
-  *	ata_build_rw_tf - Build ATA taskfile for given read/write request
-  *	@tf: Target ATA taskfile
-@@ -5151,6 +5164,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
- 		if (tag < 0)
- 			return NULL;
- 	}
-+#ifdef CONFIG_ATA_LEDS
-+	ata_led_act(ap);
-+#endif
- 
- 	qc = __ata_qc_from_tag(ap, tag);
- 	qc->tag = qc->hw_tag = tag;
-@@ -6087,6 +6103,9 @@ struct ata_port *ata_port_alloc(struct a
- 	ap->stats.unhandled_irq = 1;
- 	ap->stats.idle_irq = 1;
- #endif
-+#ifdef CONFIG_ATA_LEDS
-+	ap->ledtrig = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
-+#endif
- 	ata_sff_port_init(ap);
- 
- 	return ap;
-@@ -6122,6 +6141,12 @@ static void ata_host_release(struct kref
- 
- 		kfree(ap->pmp_link);
- 		kfree(ap->slave_link);
-+#ifdef CONFIG_ATA_LEDS
-+		if (ap->ledtrig) {
-+			led_trigger_unregister(ap->ledtrig);
-+			kfree(ap->ledtrig);
-+		};
-+#endif
- 		kfree(ap);
- 		host->ports[i] = NULL;
- 	}
-@@ -6585,7 +6610,23 @@ int ata_host_register(struct ata_host *h
- 		host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
- 		host->ports[i]->local_port_no = i + 1;
- 	}
-+#ifdef CONFIG_ATA_LEDS
-+	for (i = 0; i < host->n_ports; i++) {
-+		if (unlikely(!host->ports[i]->ledtrig))
-+			continue;
- 
-+		snprintf(host->ports[i]->ledtrig_name,
-+			sizeof(host->ports[i]->ledtrig_name), "ata%u",
-+			host->ports[i]->print_id);
-+
-+		host->ports[i]->ledtrig->name = host->ports[i]->ledtrig_name;
-+
-+		if (led_trigger_register(host->ports[i]->ledtrig)) {
-+			kfree(host->ports[i]->ledtrig);
-+			host->ports[i]->ledtrig = NULL;
-+		}
-+	}
-+#endif
- 	/* Create associated sysfs transport objects  */
- 	for (i = 0; i < host->n_ports; i++) {
- 		rc = ata_tport_add(host->dev,host->ports[i]);
---- a/include/linux/libata.h
-+++ b/include/linux/libata.h
-@@ -23,6 +23,9 @@
- #include <linux/cdrom.h>
- #include <linux/sched.h>
- #include <linux/async.h>
-+#ifdef CONFIG_ATA_LEDS
-+#include <linux/leds.h>
-+#endif
- 
- /*
-  * Define if arch has non-standard setup.  This is a _PCI_ standard
-@@ -882,6 +885,12 @@ struct ata_port {
- #ifdef CONFIG_ATA_ACPI
- 	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
- #endif
-+
-+#ifdef CONFIG_ATA_LEDS
-+	struct led_trigger	*ledtrig;
-+	char			ledtrig_name[8];
-+#endif
-+
- 	/* owned by EH */
- 	u8			sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
- };
diff --git a/target/linux/generic/pending-5.4/840-hwrng-bcm2835-set-quality-to-1000.patch b/target/linux/generic/pending-5.4/840-hwrng-bcm2835-set-quality-to-1000.patch
deleted file mode 100644
index 247c6d8364..0000000000
--- a/target/linux/generic/pending-5.4/840-hwrng-bcm2835-set-quality-to-1000.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From d6988cf1d16faac56899918bb2b1be8d85155e3f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Sat, 20 Feb 2021 18:36:38 +0100
-Subject: [PATCH] hwrng: bcm2835: set quality to 1000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows devices without a high precission timer to reduce boot from >100s
-to <30s.
-
-Signed-off-by: �lvaro Fernández Rojas <noltari@gmail.com>
----
- drivers/char/hw_random/bcm2835-rng.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/char/hw_random/bcm2835-rng.c
-+++ b/drivers/char/hw_random/bcm2835-rng.c
-@@ -167,6 +167,7 @@ static int bcm2835_rng_probe(struct plat
- 	priv->rng.init = bcm2835_rng_init;
- 	priv->rng.read = bcm2835_rng_read;
- 	priv->rng.cleanup = bcm2835_rng_cleanup;
-+	priv->rng.quality = 1000;
- 
- 	if (dev_of_node(dev)) {
- 		rng_id = of_match_node(bcm2835_rng_of_match, np);
diff --git a/target/linux/generic/pending-5.4/920-mangle_bootargs.patch b/target/linux/generic/pending-5.4/920-mangle_bootargs.patch
deleted file mode 100644
index 83db92609b..0000000000
--- a/target/linux/generic/pending-5.4/920-mangle_bootargs.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From: Imre Kaloz <kaloz@openwrt.org>
-Subject: init: add CONFIG_MANGLE_BOOTARGS and disable it by default
-
-Enabling this option renames the bootloader supplied root=
-and rootfstype= variables, which might have to be know but
-would break the automatisms OpenWrt uses.
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- init/Kconfig |  9 +++++++++
- init/main.c  | 24 ++++++++++++++++++++++++
- 2 files changed, 33 insertions(+)
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1665,6 +1665,15 @@ config EMBEDDED
- 	  an embedded system so certain expert options are available
- 	  for configuration.
- 
-+config MANGLE_BOOTARGS
-+	bool "Rename offending bootargs"
-+	depends on EXPERT
-+	help
-+	  Sometimes the bootloader passed bogus root= and rootfstype=
-+	  parameters to the kernel, and while you want to ignore them,
-+	  you need to know the values f.e. to support dual firmware
-+	  layouts on the flash.
-+
- config HAVE_PERF_EVENTS
- 	bool
- 	help
---- a/init/main.c
-+++ b/init/main.c
-@@ -367,6 +367,29 @@ static inline void setup_nr_cpu_ids(void
- static inline void smp_prepare_cpus(unsigned int maxcpus) { }
- #endif
- 
-+#ifdef CONFIG_MANGLE_BOOTARGS
-+static void __init mangle_bootargs(char *command_line)
-+{
-+	char *rootdev;
-+	char *rootfs;
-+
-+	rootdev = strstr(command_line, "root=/dev/mtdblock");
-+
-+	if (rootdev)
-+		strncpy(rootdev, "mangled_rootblock=", 18);
-+
-+	rootfs = strstr(command_line, "rootfstype");
-+
-+	if (rootfs)
-+		strncpy(rootfs, "mangled_fs", 10);
-+
-+}
-+#else
-+static void __init mangle_bootargs(char *command_line)
-+{
-+}
-+#endif
-+
- /*
-  * We need to store the untouched command line for future reference.
-  * We also need to store the touched command line since the parameter
-@@ -597,6 +620,7 @@ asmlinkage __visible void __init start_k
- 	pr_notice("%s", linux_banner);
- 	early_security_init();
- 	setup_arch(&command_line);
-+	mangle_bootargs(command_line);
- 	setup_command_line(command_line);
- 	setup_nr_cpu_ids();
- 	setup_per_cpu_areas();
diff --git a/target/linux/layerscape/armv7/config-5.4 b/target/linux/layerscape/armv7/config-5.4
deleted file mode 100644
index d1577e9bbe..0000000000
--- a/target/linux/layerscape/armv7/config-5.4
+++ /dev/null
@@ -1,673 +0,0 @@
-CONFIG_AD525X_DPOT=y
-CONFIG_AD525X_DPOT_I2C=y
-# CONFIG_AD525X_DPOT_SPI is not set
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_APDS9802ALS=y
-CONFIG_AQUANTIA_PHY=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_643719=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_754327=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_ERRATA_798181=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
-# CONFIG_ARM_IMX_CPUFREQ_DT is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_LPAE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_PSCI=y
-CONFIG_ARM_PSCI_FW=y
-# CONFIG_ARM_SMMU is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_AT803X_PHY=y
-# CONFIG_AT803X_PHY_SMART_EEE is not set
-CONFIG_ATAGS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BATTERY_SBS=y
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_CMDLINE_PARSER=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=262144
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_BOUNCE=y
-CONFIG_BRCMSTB_GISB_ARB=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CDROM=y
-CONFIG_CHECKPOINT_RESTORE=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_IMX_GPT=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLK_QORIQ=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=64
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_CMDLINE_PARTITION=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-# CONFIG_CRYPTO_TLS is not set
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEVFREQ_GOV_PASSIVE is not set
-# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
-# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
-# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
-# CONFIG_DEVFREQ_GOV_USERSPACE is not set
-# CONFIG_DEVFREQ_THERMAL is not set
-# CONFIG_DEVICE_THERMAL is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DT_IDLE_STATES=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_DW_DMAC=y
-CONFIG_DW_DMAC_CORE=y
-CONFIG_DW_WATCHDOG=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_93CX6=y
-CONFIG_EEPROM_AT24=y
-CONFIG_ELF_CORE=y
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_F2FS_FS=y
-CONFIG_FAILOVER=y
-CONFIG_FAT_FS=y
-# CONFIG_FEC is not set
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_FREEZER=y
-CONFIG_FSL_EDMA=y
-# CONFIG_FSL_EDMA_V3 is not set
-CONFIG_FSL_GUTS=y
-CONFIG_FSL_IFC=y
-# CONFIG_FSL_PPFE is not set
-CONFIG_FSL_PQ_MDIO=y
-# CONFIG_FSL_QIXIS is not set
-CONFIG_FSL_RCPM=y
-# CONFIG_FSL_SDK_DPA is not set
-CONFIG_FSL_XGMAC_MDIO=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FTRACE=y
-# CONFIG_FTRACE_SYSCALLS is not set
-CONFIG_FUSE_FS=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GIANFAR=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_GPIO_MXC=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HID=y
-CONFIG_HID_GENERIC=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HVC_DRIVER=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_IMX_RNGC=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_DEMUX_PINCTRL=y
-CONFIG_I2C_DESIGNWARE_CORE=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
-# CONFIG_I2C_DESIGNWARE_SLAVE is not set
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_IMX=y
-# CONFIG_I2C_IMX_LPI2C is not set
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_MUX_PINCTRL=y
-CONFIG_I2C_RK3X=y
-CONFIG_I2C_SLAVE=y
-CONFIG_I2C_SLAVE_EEPROM=y
-CONFIG_I2C_XILINX=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_ICS932S401=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IMX2_WDT=y
-# CONFIG_IMX7ULP_WDT is not set
-CONFIG_IMX_DMA=y
-# CONFIG_IMX_GPCV2_PM_DOMAINS is not set
-# CONFIG_IMX_IRQSTEER is not set
-CONFIG_IMX_SDMA=y
-# CONFIG_IMX_WEIM is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_INPHI_PHY is not set
-CONFIG_INPUT=y
-# CONFIG_INPUT_MISC is not set
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IPC_NS=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-CONFIG_ISL29003=y
-# CONFIG_IVSHMEM_NET is not set
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_LIBFDT=y
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LS_SCFG_MSI=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MANDATORY_FILE_LOCKING=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MCPM=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-# CONFIG_MDIO_GPIO is not set
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_SYSCON=y
-# CONFIG_MFD_VEXPRESS_SYSREG is not set
-CONFIG_MICREL_PHY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=16
-# CONFIG_MMC_MXC is not set
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_ESDHC_IMX is not set
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MSDOS_FS=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SST25L=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MX3_IPU=y
-CONFIG_MX3_IPU_IRQS=4
-CONFIG_MXC_CLK=y
-# CONFIG_MXS_DMA is not set
-CONFIG_NAMESPACES=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FAILOVER=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_NS=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=16
-CONFIG_NTFS_FS=y
-CONFIG_NVMEM=y
-# CONFIG_NVMEM_IMX_IIM is not set
-# CONFIG_NVMEM_SNVS_LPGPR is not set
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PACKET_DIAG=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_ECAM=y
-CONFIG_PCI_HOST_COMMON=y
-CONFIG_PCI_HOST_GENERIC=y
-# CONFIG_PCI_IMX6 is not set
-CONFIG_PCI_LAYERSCAPE=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PID_NS=y
-CONFIG_PINCTRL=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_PL310_ERRATA_727915=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_DEVFREQ=y
-# CONFIG_PM_DEVFREQ_EVENT is not set
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_BRCMKONA=y
-CONFIG_POWER_RESET_BRCMSTB=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_RESET_GPIO_RESTART=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_RESET_SYSCON_POWEROFF=y
-CONFIG_POWER_RESET_VEXPRESS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PROC_CHILDREN=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PSTORE=y
-# CONFIG_PSTORE_842_COMPRESS is not set
-CONFIG_PSTORE_COMPRESS=y
-CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
-CONFIG_PSTORE_CONSOLE=y
-CONFIG_PSTORE_DEFLATE_COMPRESS=y
-CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
-# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
-# CONFIG_PSTORE_LZ4_COMPRESS is not set
-# CONFIG_PSTORE_LZO_COMPRESS is not set
-CONFIG_PSTORE_PMSG=y
-CONFIG_PSTORE_RAM=y
-# CONFIG_PSTORE_ZSTD_COMPRESS is not set
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PTP_1588_CLOCK_QORIQ=y
-CONFIG_QORIQ_CPUFREQ=y
-# CONFIG_QUICC_ENGINE is not set
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC8=y
-CONFIG_REED_SOLOMON_ENC8=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_DS3232=y
-CONFIG_RTC_DRV_EM3027=y
-CONFIG_RTC_DRV_FSL_FTM_ALARM=y
-# CONFIG_RTC_DRV_IMXDI is not set
-# CONFIG_RTC_DRV_MXC is not set
-# CONFIG_RTC_DRV_MXC_V2 is not set
-CONFIG_RTC_DRV_PCF2127=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCSI=y
-CONFIG_SECCOMP=y
-CONFIG_SECCOMP_FILTER=y
-# CONFIG_SECURITY_DMESG_RESTRICT is not set
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_EM=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
-CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
-CONFIG_SERIAL_FSL_LPUART=y
-CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_ST_ASC=y
-CONFIG_SERIAL_ST_ASC_CONSOLE=y
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SMSC_PHY=y
-CONFIG_SOCK_DIAG=y
-CONFIG_SOC_BRCMSTB=y
-CONFIG_SOC_BUS=y
-# CONFIG_SOC_IMX50 is not set
-# CONFIG_SOC_IMX51 is not set
-# CONFIG_SOC_IMX53 is not set
-# CONFIG_SOC_IMX6Q is not set
-# CONFIG_SOC_IMX6SL is not set
-# CONFIG_SOC_IMX6SLL is not set
-# CONFIG_SOC_IMX6SX is not set
-# CONFIG_SOC_IMX6UL is not set
-# CONFIG_SOC_IMX7D is not set
-# CONFIG_SOC_IMX7ULP is not set
-CONFIG_SOC_LS1021A=y
-# CONFIG_SOC_VF610 is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_CADENCE=y
-CONFIG_SPI_DYNAMIC=y
-# CONFIG_SPI_FSL_LPSPI is not set
-# CONFIG_SPI_FSL_QUADSPI is not set
-# CONFIG_SPI_IMX is not set
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_SPI_XILINX=y
-CONFIG_SPMI=y
-# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
-CONFIG_SQUASHFS_DECOMP_SINGLE=y
-CONFIG_SQUASHFS_FILE_CACHE=y
-# CONFIG_SQUASHFS_FILE_DIRECT is not set
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_ZLIB=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_STACKTRACE=y
-CONFIG_STAGING_BOARD=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-# CONFIG_TSN is not set
-CONFIG_UBIFS_FS=y
-# CONFIG_UCLAMP_TASK is not set
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNIX_DIAG=y
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USER_NS=y
-CONFIG_USE_OF=y
-CONFIG_UTS_NS=y
-CONFIG_VEXPRESS_CONFIG=y
-CONFIG_VEXPRESS_SYSCFG=y
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_PCI_LEGACY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XILINX_WATCHDOG=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/layerscape/armv8_64b/config-5.4 b/target/linux/layerscape/armv8_64b/config-5.4
deleted file mode 100644
index 2d717434d1..0000000000
--- a/target/linux/layerscape/armv8_64b/config-5.4
+++ /dev/null
@@ -1,881 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_AQUANTIA_PHY=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_HEADER=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_LAYERSCAPE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=33
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CNP=y
-CONFIG_ARM64_CONT_SHIFT=4
-CONFIG_ARM64_ERRATUM_1165522=y
-CONFIG_ARM64_ERRATUM_1286807=y
-CONFIG_ARM64_ERRATUM_819472=y
-CONFIG_ARM64_ERRATUM_824069=y
-CONFIG_ARM64_ERRATUM_826319=y
-CONFIG_ARM64_ERRATUM_827319=y
-CONFIG_ARM64_ERRATUM_832075=y
-CONFIG_ARM64_ERRATUM_843419=y
-CONFIG_ARM64_HW_AFDBM=y
-CONFIG_ARM64_MODULE_PLTS=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_UAO=y
-CONFIG_ARM64_VA_BITS=48
-# CONFIG_ARM64_VA_BITS_39 is not set
-CONFIG_ARM64_VA_BITS_48=y
-CONFIG_ARM64_VHE=y
-CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
-CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_FSL_MC=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_CPUIDLE=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_ARM_SMMU=y
-# CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is not set
-CONFIG_ARM_SMMU_V3=y
-CONFIG_ARM_SP805_WATCHDOG=y
-CONFIG_ASM_MODVERSIONS=y
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATA=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_AUDIT_GENERIC=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_AUTOFS_FS=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BALLOON_COMPACTION=y
-CONFIG_BATTERY_BQ27XXX=y
-# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
-CONFIG_BATTERY_BQ27XXX_I2C=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_BSGLIB=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=262144
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_BTRFS_FS=y
-# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_CAVIUM_ERRATUM_22375=y
-CONFIG_CAVIUM_ERRATUM_23144=y
-CONFIG_CAVIUM_ERRATUM_23154=y
-CONFIG_CAVIUM_ERRATUM_27456=y
-CONFIG_CHECKPOINT_RESTORE=y
-CONFIG_CHROME_PLATFORMS=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLK_LS1028A_PLLDIG=y
-CONFIG_CLK_QORIQ=y
-CONFIG_CLK_SP810=y
-CONFIG_CLK_VEXPRESS_OSC=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_CS2000_CP=y
-CONFIG_COMMON_CLK_VERSATILE=y
-CONFIG_COMMON_CLK_XGENE=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_COREDUMP=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRC7=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-# CONFIG_CROS_EC is not set
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-# CONFIG_CRYPTO_TLS is not set
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_INFO_REDUCED is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEVICE_THERMAL is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMADEVICES=y
-CONFIG_DMATEST=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DPAA2_CONSOLE=y
-# CONFIG_DRM_CDNS_MHDP is not set
-CONFIG_DRM_RCAR_WRITEBACK=y
-CONFIG_DTC=y
-CONFIG_DT_IDLE_STATES=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_AT24=y
-CONFIG_ELF_CORE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_ENETC_TSN=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_EXTCON=y
-CONFIG_EXTCON_USB_GPIO=y
-CONFIG_F2FS_FS=y
-CONFIG_FAILOVER=y
-CONFIG_FANOTIFY=y
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FMAN_ARM=y
-# CONFIG_FMAN_MIB_CNT_OVF_IRQ_EN is not set
-# CONFIG_FMAN_P1023 is not set
-# CONFIG_FMAN_P3040_P4080_P5020 is not set
-# CONFIG_FMAN_PFC is not set
-# CONFIG_FMAN_V3H is not set
-# CONFIG_FMAN_V3L is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FRAME_WARN=2048
-CONFIG_FREEZER=y
-CONFIG_FSL_BMAN_CONFIG=y
-CONFIG_FSL_BMAN_DEBUGFS=y
-# CONFIG_FSL_BMAN_TEST is not set
-# CONFIG_FSL_DPAA is not set
-CONFIG_FSL_DPAA2=y
-CONFIG_FSL_DPAA2_ETH=y
-CONFIG_FSL_DPAA2_ETHSW=y
-# CONFIG_FSL_DPAA2_ETH_CEETM is not set
-# CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE is not set
-CONFIG_FSL_DPAA2_EVB=y
-CONFIG_FSL_DPAA2_MAC=y
-# CONFIG_FSL_DPAA2_MAC_NETDEVS is not set
-CONFIG_FSL_DPAA2_PTP_CLOCK=y
-# CONFIG_FSL_DPAA2_QDMA is not set
-# CONFIG_FSL_DPAA_1588 is not set
-CONFIG_FSL_DPAA_ADVANCED_DRIVERS=y
-# CONFIG_FSL_DPAA_CEETM is not set
-CONFIG_FSL_DPAA_CS_THRESHOLD_10G=0x10000000
-CONFIG_FSL_DPAA_CS_THRESHOLD_1G=0x06000000
-# CONFIG_FSL_DPAA_DBG_LOOP is not set
-# CONFIG_FSL_DPAA_ETH_DEBUG is not set
-CONFIG_FSL_DPAA_ETH_DEBUGFS=y
-# CONFIG_FSL_DPAA_ETH_JUMBO_FRAME is not set
-CONFIG_FSL_DPAA_ETH_MAX_BUF_COUNT=128
-CONFIG_FSL_DPAA_ETH_REFILL_THRESHOLD=80
-# CONFIG_FSL_DPAA_HOOKS is not set
-CONFIG_FSL_DPAA_INGRESS_CS_THRESHOLD=0x10000000
-CONFIG_FSL_DPAA_OFFLINE_PORTS=y
-# CONFIG_FSL_DPAA_TS is not set
-CONFIG_FSL_DPA_CAN_WAIT=y
-CONFIG_FSL_DPA_CAN_WAIT_SYNC=y
-# CONFIG_FSL_DPA_CHECKING is not set
-CONFIG_FSL_DPA_PIRQ_FAST=y
-CONFIG_FSL_DPA_PIRQ_SLOW=y
-CONFIG_FSL_DPA_PORTAL_SHARE=y
-CONFIG_FSL_EDMA=y
-# CONFIG_FSL_EDMA_V3 is not set
-CONFIG_FSL_ENETC=y
-CONFIG_FSL_ENETC_HW_TIMESTAMPING=y
-CONFIG_FSL_ENETC_MDIO=y
-CONFIG_FSL_ENETC_PTP_CLOCK=y
-CONFIG_FSL_ENETC_VF=y
-CONFIG_FSL_ERRATUM_A008585=y
-# CONFIG_FSL_FMAN is not set
-CONFIG_FSL_FM_MAX_FRAME_SIZE=1522
-CONFIG_FSL_FM_RX_EXTRA_HEADROOM=64
-CONFIG_FSL_GUTS=y
-CONFIG_FSL_IFC=y
-CONFIG_FSL_MC_BUS=y
-CONFIG_FSL_MC_DPIO=y
-CONFIG_FSL_MC_UAPI_SUPPORT=y
-CONFIG_FSL_PPFE=y
-CONFIG_FSL_PPFE_UTIL_DISABLED=y
-CONFIG_FSL_QIXIS=y
-CONFIG_FSL_QMAN_CI_SCHED_CFG_BMAN_W=2
-CONFIG_FSL_QMAN_CI_SCHED_CFG_RW_W=2
-CONFIG_FSL_QMAN_CI_SCHED_CFG_SRCCIV=4
-CONFIG_FSL_QMAN_CI_SCHED_CFG_SRQ_W=3
-CONFIG_FSL_QMAN_CONFIG=y
-CONFIG_FSL_QMAN_DEBUGFS=y
-CONFIG_FSL_QMAN_FQD_SZ=10
-CONFIG_FSL_QMAN_FQ_LOOKUP=y
-CONFIG_FSL_QMAN_INIT_TIMEOUT=10
-CONFIG_FSL_QMAN_PFDR_SZ=13
-CONFIG_FSL_QMAN_PIRQ_DQRR_ITHRESH=12
-CONFIG_FSL_QMAN_PIRQ_IPERIOD=100
-CONFIG_FSL_QMAN_PIRQ_MR_ITHRESH=4
-CONFIG_FSL_QMAN_POLL_LIMIT=32
-# CONFIG_FSL_QMAN_TEST is not set
-CONFIG_FSL_RCPM=y
-CONFIG_FSL_SDK_BMAN=y
-CONFIG_FSL_SDK_DPA=y
-CONFIG_FSL_SDK_DPAA_ETH=y
-CONFIG_FSL_SDK_FMAN=y
-# CONFIG_FSL_SDK_FMAN_RTC_API is not set
-# CONFIG_FSL_SDK_FMAN_TEST is not set
-CONFIG_FSL_SDK_QMAN=y
-CONFIG_FSL_USDPAA=y
-CONFIG_FSL_XGMAC_MDIO=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FUSE_FS=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GARP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-# CONFIG_GIANFAR is not set
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HIBERNATION=y
-CONFIG_HID=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GENERIC=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_HVC_DRIVER=y
-CONFIG_HVC_IRQ=y
-CONFIG_HVC_XEN=y
-CONFIG_HVC_XEN_FRONTEND=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_DESIGNWARE_CORE=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
-# CONFIG_I2C_DESIGNWARE_SLAVE is not set
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_IMX=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_RK3X=y
-CONFIG_I2C_SLAVE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_IMX2_WDT=y
-CONFIG_INET_DIAG=y
-# CONFIG_INET_DIAG_DESTROY is not set
-# CONFIG_INET_RAW_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPHI_PHY=y
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
-CONFIG_IOMMU_API=y
-# CONFIG_IOMMU_DEBUGFS is not set
-CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
-CONFIG_IOMMU_DMA=y
-CONFIG_IOMMU_IOVA=y
-CONFIG_IOMMU_IO_PGTABLE=y
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-CONFIG_IOMMU_IO_PGTABLE_LPAE=y
-# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IPC_NS=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_BYPASS_MANAGER=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MSI_IOMMU=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-# CONFIG_IVSHMEM_NET is not set
-CONFIG_JBD2=y
-CONFIG_JUMP_LABEL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KPC2000 is not set
-CONFIG_KSM=y
-CONFIG_LIBCRC32C=y
-CONFIG_LIBFDT=y
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LS_SCFG_MSI=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MANDATORY_FILE_LOCKING=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
-CONFIG_MDIO_DEVICE=y
-# CONFIG_MDIO_GPIO is not set
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MEMORY_BALLOON=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MEMTEST=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SYSCON=y
-# CONFIG_MFD_VEXPRESS_SYSREG is not set
-CONFIG_MICREL_PHY=y
-CONFIG_MICROSEMI_PHY=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMU_NOTIFIER=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_CYAPA is not set
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_BYD=y
-CONFIG_MOUSE_PS2_CYPRESS=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-CONFIG_MOUSE_PS2_FOCALTECH=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SMBUS=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MRP=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_FIT_FW=y
-CONFIG_MTD_SST25L=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTIPLEXER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_MUX_ADG792A is not set
-# CONFIG_MUX_ADGS1408 is not set
-# CONFIG_MUX_GPIO is not set
-CONFIG_MUX_MMIO=y
-CONFIG_MV_XOR_V2=y
-CONFIG_NAMESPACES=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_FAILOVER=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_NS=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NODES_SHIFT=2
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=64
-CONFIG_NUMA=y
-CONFIG_NUMA_BALANCING=y
-CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IOMMU=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_NUMA=y
-CONFIG_PACKET_DIAG=y
-CONFIG_PADATA=y
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_PARAVIRT=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-CONFIG_PCIE_LAYERSCAPE_GEN4=y
-CONFIG_PCIE_MOBIVEIL=y
-CONFIG_PCIE_MOBIVEIL_HOST=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_ATS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_ECAM=y
-CONFIG_PCI_HISI=y
-CONFIG_PCI_HOST_COMMON=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_IOV=y
-CONFIG_PCI_LAYERSCAPE=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PGTABLE_LEVELS=4
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_XGENE=y
-CONFIG_PID_IN_CONTEXTIDR=y
-CONFIG_PID_NS=y
-CONFIG_PL330_DMA=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_STD_PARTITION=""
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_RESET_VEXPRESS=y
-CONFIG_POWER_RESET_XGENE=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPTION=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_PROC_CHILDREN=y
-CONFIG_PROFILING=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PTP_1588_CLOCK_QORIQ=y
-CONFIG_QCOM_HIDMA=y
-CONFIG_QCOM_HIDMA_MGMT=y
-CONFIG_QCOM_QDF2400_ERRATUM_0065=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QMAN_CEETM_UPDATE_PERIOD=1000
-CONFIG_QORIQ_CPUFREQ=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-# CONFIG_QUICC_ENGINE is not set
-CONFIG_QUOTA=y
-CONFIG_QUOTACTL=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_RAID6_PQ=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_DS3232=y
-CONFIG_RTC_DRV_FSL_FTM_ALARM=y
-CONFIG_RTC_DRV_PCF2127=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCHED_INFO=y
-CONFIG_SCHED_MC=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-# CONFIG_SCSI_SAS_ATA is not set
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SAS_LIBSAS=y
-CONFIG_SECCOMP=y
-CONFIG_SECCOMP_FILTER=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_FSL_LPUART=y
-CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_SC16IS7XX=y
-CONFIG_SERIAL_SC16IS7XX_CORE=y
-# CONFIG_SERIAL_SC16IS7XX_I2C is not set
-CONFIG_SERIAL_SC16IS7XX_SPI=y
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_SERIO=y
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-CONFIG_SMP=y
-CONFIG_SOCK_DIAG=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_FSL_DSPI=y
-CONFIG_SPI_FSL_QUADSPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_NXP_FLEXSPI=y
-CONFIG_SPI_PL022=y
-CONFIG_SPMI=y
-# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
-CONFIG_SQUASHFS_DECOMP_SINGLE=y
-CONFIG_SQUASHFS_FILE_CACHE=y
-# CONFIG_SQUASHFS_FILE_DIRECT is not set
-# CONFIG_SQUASHFS_XZ is not set
-CONFIG_SQUASHFS_ZLIB=y
-CONFIG_SRAM=y
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWIOTLB=y
-CONFIG_SWIOTLB_XEN=y
-CONFIG_SWPHY=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_HYPERVISOR=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_TASK_XACCT=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_EMULATION=y
-CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
-# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
-CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
-CONFIG_TREE_SRCU=y
-CONFIG_TSN=y
-CONFIG_UBIFS_FS=y
-CONFIG_UIO=y
-CONFIG_UIO_AEC=y
-CONFIG_UIO_CIF=y
-CONFIG_UIO_DMEM_GENIRQ=y
-CONFIG_UIO_MF624=y
-CONFIG_UIO_NETX=y
-CONFIG_UIO_PCI_GENERIC=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_UIO_PRUSS is not set
-CONFIG_UIO_SERCOS3=y
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_UNIX_DIAG=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USER_NS=y
-CONFIG_USE_PERCPU_NUMA_NODE_ID=y
-CONFIG_UTS_NS=y
-CONFIG_VEXPRESS_CONFIG=y
-CONFIG_VEXPRESS_SYSCFG=y
-CONFIG_VFAT_FS=y
-CONFIG_VFIO=y
-CONFIG_VFIO_FSL_MC=y
-CONFIG_VFIO_IOMMU_TYPE1=y
-# CONFIG_VFIO_MDEV is not set
-# CONFIG_VFIO_NOIOMMU is not set
-CONFIG_VFIO_PCI=y
-CONFIG_VFIO_PCI_INTX=y
-CONFIG_VFIO_PCI_MMAP=y
-# CONFIG_VFIO_PLATFORM is not set
-CONFIG_VFIO_VIRQFD=y
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VIDEOMODE_HELPERS=y
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-# CONFIG_VIRTIO_IOMMU is not set
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_PCI_LEGACY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_VLAN_8021Q_MVRP=y
-CONFIG_VMAP_STACK=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XARRAY_MULTI=y
-CONFIG_XEN=y
-CONFIG_XENFS=y
-CONFIG_XEN_AUTO_XLATE=y
-CONFIG_XEN_BACKEND=y
-CONFIG_XEN_BALLOON=y
-# CONFIG_XEN_BLKDEV_BACKEND is not set
-CONFIG_XEN_BLKDEV_FRONTEND=y
-CONFIG_XEN_COMPAT_XENFS=y
-CONFIG_XEN_DEV_EVTCHN=y
-CONFIG_XEN_DOM0=y
-CONFIG_XEN_FBDEV_FRONTEND=y
-CONFIG_XEN_GNTDEV=y
-CONFIG_XEN_GRANT_DEV_ALLOC=y
-# CONFIG_XEN_NETDEV_BACKEND is not set
-CONFIG_XEN_NETDEV_FRONTEND=y
-CONFIG_XEN_PRIVCMD=y
-# CONFIG_XEN_PVCALLS_BACKEND is not set
-# CONFIG_XEN_SCSI_FRONTEND is not set
-CONFIG_XEN_SYS_HYPERVISOR=y
-# CONFIG_XEN_WDT is not set
-CONFIG_XEN_XENBUS_FRONTEND=y
-CONFIG_XFS_FS=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-CONFIG_XOR_BLOCKS=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/layerscape/patches-5.4/301-arch-0001-arm-kernel-utilize-hrtimer-based-broadcast.patch b/target/linux/layerscape/patches-5.4/301-arch-0001-arm-kernel-utilize-hrtimer-based-broadcast.patch
deleted file mode 100644
index 8b9c25d0dc..0000000000
--- a/target/linux/layerscape/patches-5.4/301-arch-0001-arm-kernel-utilize-hrtimer-based-broadcast.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 0f87c1dd8f10958121e10219c89e8d710babd1ce Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Fri, 17 Jul 2015 17:11:52 +0800
-Subject: [PATCH] arm: kernel: utilize hrtimer based broadcast
-
-Hrtimer based broadcast is used on ARM platform. It can be
-registered as the tick broadcast device in the absence of
-a real external clock device.
-
-Signed-off-by: Alison Wang <alison.wang@freescale.com>
-Acked-by: Mark Rutland <mark.rutland@arm.com>
----
- arch/arm/kernel/time.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/arm/kernel/time.c
-+++ b/arch/arm/kernel/time.c
-@@ -9,6 +9,7 @@
-  *  reading the RTC at bootup, etc...
-  */
- #include <linux/clk-provider.h>
-+#include <linux/clockchips.h>
- #include <linux/clocksource.h>
- #include <linux/errno.h>
- #include <linux/export.h>
-@@ -107,5 +108,7 @@ void __init time_init(void)
- 		of_clk_init(NULL);
- #endif
- 		timer_probe();
-+
-+		tick_setup_hrtimer_broadcast();
- 	}
- }
diff --git a/target/linux/layerscape/patches-5.4/301-arch-0002-arm64-add-support-to-remap-kernel-cacheable-memory-t.patch b/target/linux/layerscape/patches-5.4/301-arch-0002-arm64-add-support-to-remap-kernel-cacheable-memory-t.patch
deleted file mode 100644
index e6c96a052a..0000000000
--- a/target/linux/layerscape/patches-5.4/301-arch-0002-arm64-add-support-to-remap-kernel-cacheable-memory-t.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 0f90f5d6b3097fd6e7dea3389dc3d8f8894b345c Mon Sep 17 00:00:00 2001
-From: Haiying Wang <Haiying.Wang@freescale.com>
-Date: Wed, 22 Apr 2015 13:09:47 -0400
-Subject: [PATCH] arm64: add support to remap kernel cacheable memory to
- userspace
-
-Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
-Reviewed-by: Roy Pledge <roy.pledge@freescale.com>
-Reviewed-by: Stuart Yoder <stuart.yoder@freescale.com>
----
- arch/arm64/include/asm/pgtable.h | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/arm64/include/asm/pgtable.h
-+++ b/arch/arm64/include/asm/pgtable.h
-@@ -428,6 +428,9 @@ static inline pmd_t pmd_mkdevmap(pmd_t p
- 	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRnE) | PTE_PXN | PTE_UXN)
- #define pgprot_writecombine(prot) \
- 	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC) | PTE_PXN | PTE_UXN)
-+#define pgprot_cached(prot) \
-+	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL) | \
-+			PTE_PXN | PTE_UXN)
- #define pgprot_device(prot) \
- 	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRE) | PTE_PXN | PTE_UXN)
- /*
diff --git a/target/linux/layerscape/patches-5.4/301-arch-0003-arm64-pgtable-add-support-to-map-cacheable-and-non-s.patch b/target/linux/layerscape/patches-5.4/301-arch-0003-arm64-pgtable-add-support-to-map-cacheable-and-non-s.patch
deleted file mode 100644
index bd39eb7e14..0000000000
--- a/target/linux/layerscape/patches-5.4/301-arch-0003-arm64-pgtable-add-support-to-map-cacheable-and-non-s.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From d59be41c014e2e17ea0aaa37d42f36548ad063b5 Mon Sep 17 00:00:00 2001
-From: Haiying Wang <Haiying.wang@freescale.com>
-Date: Sat, 8 Aug 2015 07:25:02 -0400
-Subject: [PATCH] arm64/pgtable: add support to map cacheable and non shareable
- memory
-
-Signed-off-by: Haiying Wang <Haiying.wang@freescale.com>
----
- arch/arm64/include/asm/pgtable.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/include/asm/pgtable.h
-+++ b/arch/arm64/include/asm/pgtable.h
-@@ -431,6 +431,8 @@ static inline pmd_t pmd_mkdevmap(pmd_t p
- #define pgprot_cached(prot) \
- 	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL) | \
- 			PTE_PXN | PTE_UXN)
-+#define pgprot_cached_ns(prot) \
-+	__pgprot(pgprot_val(pgprot_cached(prot)) ^ PTE_SHARED)
- #define pgprot_device(prot) \
- 	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRE) | PTE_PXN | PTE_UXN)
- /*
diff --git a/target/linux/layerscape/patches-5.4/301-arch-0004-arm64-add-ioremap-for-normal-cacheable-non-shareable.patch b/target/linux/layerscape/patches-5.4/301-arch-0004-arm64-add-ioremap-for-normal-cacheable-non-shareable.patch
deleted file mode 100644
index ca55e532ac..0000000000
--- a/target/linux/layerscape/patches-5.4/301-arch-0004-arm64-add-ioremap-for-normal-cacheable-non-shareable.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 120c8f221cb18f6630d5cb954484bac88288cced Mon Sep 17 00:00:00 2001
-From: Haiying Wang <Haiying.Wang@freescale.com>
-Date: Wed, 22 Apr 2015 13:07:25 -0400
-Subject: [PATCH] arm64: add ioremap for normal cacheable non-shareable memory
-
-Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
-Reviewed-by: Roy Pledge <roy.pledge@freescale.com>
-Reviewed-by: Stuart Yoder <stuart.yoder@freescale.com>
----
- arch/arm64/include/asm/io.h           | 1 +
- arch/arm64/include/asm/pgtable-prot.h | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/arch/arm64/include/asm/io.h
-+++ b/arch/arm64/include/asm/io.h
-@@ -170,6 +170,7 @@ extern void __iomem *ioremap_cache(phys_
- #define ioremap_nocache(addr, size)	__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
- #define ioremap_wc(addr, size)		__ioremap((addr), (size), __pgprot(PROT_NORMAL_NC))
- #define ioremap_wt(addr, size)		__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
-+#define ioremap_cache_ns(addr, size)	__ioremap((addr), (size), __pgprot(PROT_NORMAL_NS))
- 
- /*
-  * PCI configuration space mapping function.
---- a/arch/arm64/include/asm/pgtable-prot.h
-+++ b/arch/arm64/include/asm/pgtable-prot.h
-@@ -37,6 +37,7 @@
- #define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_NC))
- #define PROT_NORMAL_WT		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_WT))
- #define PROT_NORMAL		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL))
-+#define PROT_NORMAL_NS		(PTE_TYPE_PAGE | PTE_AF | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL))
- 
- #define PROT_SECT_DEVICE_nGnRE	(PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_DEVICE_nGnRE))
- #define PROT_SECT_NORMAL	(PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL))
diff --git a/target/linux/layerscape/patches-5.4/301-arch-0005-arch-arm-add-ARM-specific-fucntions-required-for-ehc.patch b/target/linux/layerscape/patches-5.4/301-arch-0005-arch-arm-add-ARM-specific-fucntions-required-for-ehc.patch
deleted file mode 100644
index ddb77d438b..0000000000
--- a/target/linux/layerscape/patches-5.4/301-arch-0005-arch-arm-add-ARM-specific-fucntions-required-for-ehc.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 3bc37b0ee99b9d66ac47aea02784242cb3224366 Mon Sep 17 00:00:00 2001
-From: Zhao Qiang <B45475@freescale.com>
-Date: Fri, 10 Oct 2014 10:38:48 +0800
-Subject: [PATCH] arch: arm: add ARM specific fucntions required for ehci fsl
- driver
-
-Add below functions for ARM platform which are used by ehci fsl driver:
-1. spin_event_timeout function
-2. set/clear bits functions
-
-Signed-off-by: Zhao Qiang <B45475@freescale.com>
-Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
----
- arch/arm/include/asm/delay.h | 16 ++++++++++++++++
- arch/arm/include/asm/io.h    | 28 ++++++++++++++++++++++++++++
- 2 files changed, 44 insertions(+)
-
---- a/arch/arm/include/asm/delay.h
-+++ b/arch/arm/include/asm/delay.h
-@@ -85,6 +85,22 @@ extern void __bad_udelay(void);
- 			__const_udelay((n) * UDELAY_MULT)) :		\
- 	  __udelay(n))
- 
-+#define spin_event_timeout(condition, timeout, delay)                          \
-+({                                                                             \
-+	typeof(condition) __ret;                                               \
-+	int i = 0;							       \
-+	while (!(__ret = (condition)) && (i++ < timeout)) {		       \
-+		if (delay)                                                     \
-+			udelay(delay);                                         \
-+		else                                                           \
-+			cpu_relax();					       \
-+		udelay(1);						       \
-+	}								       \
-+	if (!__ret)                                                            \
-+		__ret = (condition);                                           \
-+	__ret;		                                                       \
-+})
-+
- /* Loop-based definitions for assembly code. */
- extern void __loop_delay(unsigned long loops);
- extern void __loop_udelay(unsigned long usecs);
---- a/arch/arm/include/asm/io.h
-+++ b/arch/arm/include/asm/io.h
-@@ -224,6 +224,34 @@ void __iomem *pci_remap_cfgspace(resourc
- #endif
- #endif
- 
-+/* access ports */
-+#define setbits32(_addr, _v) iowrite32be(ioread32be(_addr) |  (_v), (_addr))
-+#define clrbits32(_addr, _v) iowrite32be(ioread32be(_addr) & ~(_v), (_addr))
-+
-+#define setbits16(_addr, _v) iowrite16be(ioread16be(_addr) |  (_v), (_addr))
-+#define clrbits16(_addr, _v) iowrite16be(ioread16be(_addr) & ~(_v), (_addr))
-+
-+#define setbits8(_addr, _v) iowrite8(ioread8(_addr) |  (_v), (_addr))
-+#define clrbits8(_addr, _v) iowrite8(ioread8(_addr) & ~(_v), (_addr))
-+
-+/* Clear and set bits in one shot.  These macros can be used to clear and
-+ * set multiple bits in a register using a single read-modify-write.  These
-+ * macros can also be used to set a multiple-bit bit pattern using a mask,
-+ * by specifying the mask in the 'clear' parameter and the new bit pattern
-+ * in the 'set' parameter.
-+ */
-+
-+#define clrsetbits_be32(addr, clear, set) \
-+	iowrite32be((ioread32be(addr) & ~(clear)) | (set), (addr))
-+#define clrsetbits_le32(addr, clear, set) \
-+	iowrite32le((ioread32le(addr) & ~(clear)) | (set), (addr))
-+#define clrsetbits_be16(addr, clear, set) \
-+	iowrite16be((ioread16be(addr) & ~(clear)) | (set), (addr))
-+#define clrsetbits_le16(addr, clear, set) \
-+	iowrite16le((ioread16le(addr) & ~(clear)) | (set), (addr))
-+#define clrsetbits_8(addr, clear, set) \
-+	iowrite8((ioread8(addr) & ~(clear)) | (set), (addr))
-+
- /*
-  *  IO port access primitives
-  *  -------------------------
diff --git a/target/linux/layerscape/patches-5.4/301-arch-0006-export-arch_setup_dma_ops.patch b/target/linux/layerscape/patches-5.4/301-arch-0006-export-arch_setup_dma_ops.patch
deleted file mode 100644
index 92b748074c..0000000000
--- a/target/linux/layerscape/patches-5.4/301-arch-0006-export-arch_setup_dma_ops.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-From 1c86c2f332b3aafb119c4d1ef981cd2a44286a81 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Wed, 7 Jun 2017 17:54:10 +0300
-Subject: [PATCH] export arch_setup_dma_ops()
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- arch/arm64/mm/dma-mapping.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/mm/dma-mapping.c
-+++ b/arch/arm64/mm/dma-mapping.c
-@@ -57,3 +57,4 @@ void arch_setup_dma_ops(struct device *d
- 		dev->dma_ops = &xen_swiotlb_dma_ops;
- #endif
- }
-+EXPORT_SYMBOL(arch_setup_dma_ops);
diff --git a/target/linux/layerscape/patches-5.4/301-arch-0007-arm-dma-mapping-export-arch_setup_dma_ops.patch b/target/linux/layerscape/patches-5.4/301-arch-0007-arm-dma-mapping-export-arch_setup_dma_ops.patch
deleted file mode 100644
index c05b99be3a..0000000000
--- a/target/linux/layerscape/patches-5.4/301-arch-0007-arm-dma-mapping-export-arch_setup_dma_ops.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 5f1b16ecaac2e891c43a9bbce0f5ee1c18e5aba7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Horia=20Geant=C4=83?= <horia.geanta@nxp.com>
-Date: Mon, 19 Jun 2017 16:38:59 +0300
-Subject: [PATCH] arm: dma-mapping: export arch_setup_dma_ops()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- arch/arm/mm/dma-mapping.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/mm/dma-mapping.c
-+++ b/arch/arm/mm/dma-mapping.c
-@@ -2320,6 +2320,7 @@ void arch_setup_dma_ops(struct device *d
- #endif
- 	dev->archdata.dma_ops_setup = true;
- }
-+EXPORT_SYMBOL(arch_setup_dma_ops);
- 
- void arch_teardown_dma_ops(struct device *dev)
- {
diff --git a/target/linux/layerscape/patches-5.4/301-arch-0008-arm-add-new-non-shareable-ioremap.patch b/target/linux/layerscape/patches-5.4/301-arch-0008-arm-add-new-non-shareable-ioremap.patch
deleted file mode 100644
index c09efca570..0000000000
--- a/target/linux/layerscape/patches-5.4/301-arch-0008-arm-add-new-non-shareable-ioremap.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From e5bf75ca33946d81c82014168042a64db7c81551 Mon Sep 17 00:00:00 2001
-From: Pan Jiafei <Jiafei.Pan@nxp.com>
-Date: Thu, 17 Mar 2016 02:01:03 +0000
-Subject: [PATCH] arm: add new non-shareable ioremap
-
-Signed-off-by: Pan Jiafei <Jiafei.Pan@nxp.com>
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
----
- arch/arm/include/asm/io.h       | 3 +++
- arch/arm/include/asm/mach/map.h | 4 ++--
- arch/arm/mm/ioremap.c           | 7 +++++++
- arch/arm/mm/mmu.c               | 9 +++++++++
- 4 files changed, 21 insertions(+), 2 deletions(-)
-
---- a/arch/arm/include/asm/io.h
-+++ b/arch/arm/include/asm/io.h
-@@ -123,6 +123,7 @@ static inline u32 __raw_readl(const vola
- #define MT_DEVICE_NONSHARED	1
- #define MT_DEVICE_CACHED	2
- #define MT_DEVICE_WC		3
-+#define MT_MEMORY_RW_NS		4
- /*
-  * types 4 onwards can be found in asm/mach/map.h and are undefined
-  * for ioremap
-@@ -438,6 +439,8 @@ void __iomem *ioremap_wc(resource_size_t
- #define ioremap_wc ioremap_wc
- #define ioremap_wt ioremap_wc
- 
-+void __iomem *ioremap_cache_ns(resource_size_t res_cookie, size_t size);
-+
- void iounmap(volatile void __iomem *iomem_cookie);
- #define iounmap iounmap
- 
---- a/arch/arm/include/asm/mach/map.h
-+++ b/arch/arm/include/asm/mach/map.h
-@@ -18,9 +18,9 @@ struct map_desc {
- 	unsigned int type;
- };
- 
--/* types 0-3 are defined in asm/io.h */
-+/* types 0-4 are defined in asm/io.h */
- enum {
--	MT_UNCACHED = 4,
-+	MT_UNCACHED = 5,
- 	MT_CACHECLEAN,
- 	MT_MINICLEAN,
- 	MT_LOW_VECTORS,
---- a/arch/arm/mm/ioremap.c
-+++ b/arch/arm/mm/ioremap.c
-@@ -401,6 +401,13 @@ void __iomem *ioremap_wc(resource_size_t
- }
- EXPORT_SYMBOL(ioremap_wc);
- 
-+void __iomem *ioremap_cache_ns(resource_size_t res_cookie, size_t size)
-+{
-+	return arch_ioremap_caller(res_cookie, size, MT_MEMORY_RW_NS,
-+				   __builtin_return_address(0));
-+}
-+EXPORT_SYMBOL(ioremap_cache_ns);
-+
- /*
-  * Remap an arbitrary physical address space into the kernel virtual
-  * address space as memory. Needed when the kernel wants to execute
---- a/arch/arm/mm/mmu.c
-+++ b/arch/arm/mm/mmu.c
-@@ -314,6 +314,13 @@ static struct mem_type mem_types[] __ro_
- 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
- 		.domain    = DOMAIN_KERNEL,
- 	},
-+	[MT_MEMORY_RW_NS] = {
-+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-+			     L_PTE_XN,
-+		.prot_l1   = PMD_TYPE_TABLE,
-+		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_XN,
-+		.domain    = DOMAIN_KERNEL,
-+	},
- 	[MT_ROM] = {
- 		.prot_sect = PMD_TYPE_SECT,
- 		.domain    = DOMAIN_KERNEL,
-@@ -650,6 +657,7 @@ static void __init build_mem_type_table(
- 	}
- 	kern_pgprot |= PTE_EXT_AF;
- 	vecs_pgprot |= PTE_EXT_AF;
-+	mem_types[MT_MEMORY_RW_NS].prot_pte |= PTE_EXT_AF | cp->pte;
- 
- 	/*
- 	 * Set PXN for user mappings
-@@ -678,6 +686,7 @@ static void __init build_mem_type_table(
- 	mem_types[MT_MEMORY_RWX].prot_pte |= kern_pgprot;
- 	mem_types[MT_MEMORY_RW].prot_sect |= ecc_mask | cp->pmd;
- 	mem_types[MT_MEMORY_RW].prot_pte |= kern_pgprot;
-+	mem_types[MT_MEMORY_RW_NS].prot_sect |= ecc_mask | cp->pmd;
- 	mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot;
- 	mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= ecc_mask;
- 	mem_types[MT_ROM].prot_sect |= cp->pmd;
diff --git a/target/linux/layerscape/patches-5.4/301-arch-0009-arm-add-pgprot_cached-and-pgprot_cached_ns-support.patch b/target/linux/layerscape/patches-5.4/301-arch-0009-arm-add-pgprot_cached-and-pgprot_cached_ns-support.patch
deleted file mode 100644
index 1f990734c8..0000000000
--- a/target/linux/layerscape/patches-5.4/301-arch-0009-arm-add-pgprot_cached-and-pgprot_cached_ns-support.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 395718e9f6445369089dba16fa50182c5e0528f5 Mon Sep 17 00:00:00 2001
-From: Jianhua Xie <jianhua.xie@nxp.com>
-Date: Fri, 29 Jan 2016 16:40:46 +0800
-Subject: [PATCH] arm: add pgprot_cached and pgprot_cached_ns support
-
-Signed-off-by: Jianhua Xie <jianhua.xie@nxp.com>
----
- arch/arm/include/asm/pgtable.h | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/include/asm/pgtable.h
-+++ b/arch/arm/include/asm/pgtable.h
-@@ -116,6 +116,13 @@ extern pgprot_t		pgprot_s2_device;
- #define pgprot_noncached(prot) \
- 	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
- 
-+#define pgprot_cached(prot) \
-+	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_DEV_CACHED)
-+
-+#define pgprot_cached_ns(prot) \
-+	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_DEV_CACHED | \
-+			L_PTE_MT_DEV_NONSHARED)
-+
- #define pgprot_writecombine(prot) \
- 	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
- 
diff --git a/target/linux/layerscape/patches-5.4/301-arch-0010-arm64-add-stage-2-cache-able-non-shareable-page-type.patch b/target/linux/layerscape/patches-5.4/301-arch-0010-arm64-add-stage-2-cache-able-non-shareable-page-type.patch
deleted file mode 100644
index 66fd76066a..0000000000
--- a/target/linux/layerscape/patches-5.4/301-arch-0010-arm64-add-stage-2-cache-able-non-shareable-page-type.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From 73b06aca47caafdce7bff2c7b27a070d5a8d8172 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 5 Dec 2017 15:24:05 +0200
-Subject: [PATCH] arm64: add stage-2 cache-able non-shareable page type
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- arch/arm64/include/asm/pgtable-prot.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/include/asm/pgtable-prot.h
-+++ b/arch/arm64/include/asm/pgtable-prot.h
-@@ -78,6 +78,7 @@
- 	})
- 
- #define PAGE_S2			__pgprot(_PROT_DEFAULT | PAGE_S2_MEMATTR(NORMAL) | PTE_S2_RDONLY | PAGE_S2_XN)
-+#define PAGE_S2_NS		__pgprot(PAGE_S2_MEMATTR(NORMAL) | PTE_S2_RDWR | PTE_TYPE_PAGE | PTE_AF)
- #define PAGE_S2_DEVICE		__pgprot(_PROT_DEFAULT | PAGE_S2_MEMATTR(DEVICE_nGnRE) | PTE_S2_RDONLY | PTE_S2_XN)
- 
- #define PAGE_NONE		__pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN)
diff --git a/target/linux/layerscape/patches-5.4/301-arch-0011-drivers-soc-fsl-add-qixis-driver.patch b/target/linux/layerscape/patches-5.4/301-arch-0011-drivers-soc-fsl-add-qixis-driver.patch
deleted file mode 100644
index bd82274be2..0000000000
--- a/target/linux/layerscape/patches-5.4/301-arch-0011-drivers-soc-fsl-add-qixis-driver.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-From 68e332146b6f0a1d2a4514810986a7cf3c3117e3 Mon Sep 17 00:00:00 2001
-From: Pankaj Bansal <pankaj.bansal@nxp.com>
-Date: Thu, 28 Feb 2019 17:22:28 +0530
-Subject: [PATCH] drivers: soc: fsl: add qixis driver
-
-FPGA on LX2160AQDS/LX2160ARDB connected on I2C bus, so add qixis driver
-which is basically an i2c client driver to control FPGA.
-
-Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
----
- drivers/soc/fsl/Kconfig      |  11 +++++
- drivers/soc/fsl/Makefile     |   1 +
- drivers/soc/fsl/qixis_ctrl.c | 105 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 117 insertions(+)
- create mode 100644 drivers/soc/fsl/qixis_ctrl.c
-
---- a/drivers/soc/fsl/Kconfig
-+++ b/drivers/soc/fsl/Kconfig
-@@ -40,4 +40,15 @@ config DPAA2_CONSOLE
- 	  /dev/dpaa2_mc_console and /dev/dpaa2_aiop_console,
- 	  which can be used to dump the Management Complex and AIOP
- 	  firmware logs.
-+
-+config FSL_QIXIS
-+	tristate "QIXIS system controller driver"
-+	depends on OF
-+	select REGMAP_I2C
-+	select REGMAP_MMIO
-+	default n
-+	help
-+	  Say y here to enable QIXIS system controller api. The qixis driver
-+	  provides FPGA functions to control system.
-+
- endmenu
---- a/drivers/soc/fsl/Makefile
-+++ b/drivers/soc/fsl/Makefile
-@@ -6,6 +6,7 @@
- obj-$(CONFIG_FSL_DPAA)                 += qbman/
- obj-$(CONFIG_QUICC_ENGINE)		+= qe/
- obj-$(CONFIG_CPM)			+= qe/
-+obj-$(CONFIG_FSL_QIXIS) 		+= qixis_ctrl.o
- obj-$(CONFIG_FSL_GUTS)			+= guts.o
- obj-$(CONFIG_FSL_MC_DPIO) 		+= dpio/
- obj-$(CONFIG_DPAA2_CONSOLE)		+= dpaa2-console.o
---- /dev/null
-+++ b/drivers/soc/fsl/qixis_ctrl.c
-@@ -0,0 +1,105 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+
-+/* Freescale QIXIS system controller driver.
-+ *
-+ * Copyright 2015 Freescale Semiconductor, Inc.
-+ * Copyright 2018-2019 NXP
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/i2c.h>
-+#include <linux/module.h>
-+#include <linux/mfd/core.h>
-+#include <linux/of.h>
-+#include <linux/regmap.h>
-+
-+/* QIXIS MAP */
-+struct fsl_qixis_regs {
-+	u8		id;		/* Identification Registers */
-+	u8		version;	/* Version Register */
-+	u8		qixis_ver;	/* QIXIS Version Register */
-+	u8		reserved1[0x1f];
-+};
-+
-+struct qixis_priv {
-+	struct regmap		*regmap;
-+};
-+
-+static struct regmap_config qixis_regmap_config = {
-+	.reg_bits = 8,
-+	.val_bits = 8,
-+};
-+
-+static const struct mfd_cell fsl_qixis_devs[] = {
-+	{
-+		.name = "reg-mux",
-+		.of_compatible = "reg-mux",
-+	},
-+};
-+
-+static int fsl_qixis_i2c_probe(struct i2c_client *client)
-+{
-+	struct qixis_priv *priv;
-+	int ret = 0;
-+	u32 qver;
-+
-+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-+		return -EOPNOTSUPP;
-+
-+	priv = devm_kzalloc(&client->dev, sizeof(struct qixis_priv),
-+			    GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	priv->regmap = regmap_init_i2c(client, &qixis_regmap_config);
-+	regmap_read(priv->regmap, offsetof(struct fsl_qixis_regs, qixis_ver),
-+		    &qver);
-+	pr_info("Freescale QIXIS Version: 0x%08x\n", qver);
-+
-+	i2c_set_clientdata(client, priv);
-+
-+	if (of_device_is_compatible(client->dev.of_node, "simple-mfd"))
-+		ret = devm_mfd_add_devices(&client->dev, -1, fsl_qixis_devs,
-+					   ARRAY_SIZE(fsl_qixis_devs), NULL, 0,
-+					   NULL);
-+	if (ret)
-+		goto error;
-+
-+	return ret;
-+error:
-+	regmap_exit(priv->regmap);
-+
-+	return ret;
-+}
-+
-+static int fsl_qixis_i2c_remove(struct i2c_client *client)
-+{
-+	struct qixis_priv *priv;
-+
-+	priv = i2c_get_clientdata(client);
-+	regmap_exit(priv->regmap);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id fsl_qixis_i2c_of_match[] = {
-+	{ .compatible = "fsl,fpga-qixis-i2c" },
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, fsl_qixis_i2c_of_match);
-+
-+static struct i2c_driver fsl_qixis_i2c_driver = {
-+	.driver = {
-+		.name	= "qixis_ctrl_i2c",
-+		.owner	= THIS_MODULE,
-+		.of_match_table = of_match_ptr(fsl_qixis_i2c_of_match),
-+	},
-+	.probe_new	= fsl_qixis_i2c_probe,
-+	.remove		= fsl_qixis_i2c_remove,
-+};
-+module_i2c_driver(fsl_qixis_i2c_driver);
-+
-+MODULE_AUTHOR("Wang Dongsheng <dongsheng.wang@freescale.com>");
-+MODULE_DESCRIPTION("Freescale QIXIS system controller driver");
-+MODULE_LICENSE("GPL");
-+
diff --git a/target/linux/layerscape/patches-5.4/301-arch-0012-soc-fsl-select-MFD_CORE-for-qixis-driver.patch b/target/linux/layerscape/patches-5.4/301-arch-0012-soc-fsl-select-MFD_CORE-for-qixis-driver.patch
deleted file mode 100644
index aefae7c6c2..0000000000
--- a/target/linux/layerscape/patches-5.4/301-arch-0012-soc-fsl-select-MFD_CORE-for-qixis-driver.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 5451ebbfc7e8ba51bceb12ee5409364000e6475b Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Thu, 9 Apr 2020 18:24:07 +0800
-Subject: [PATCH] soc: fsl: select MFD_CORE for qixis driver
-
-The QIXIS driver should select MFD_CORE option.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/soc/fsl/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/soc/fsl/Kconfig
-+++ b/drivers/soc/fsl/Kconfig
-@@ -46,6 +46,7 @@ config FSL_QIXIS
- 	depends on OF
- 	select REGMAP_I2C
- 	select REGMAP_MMIO
-+	select MFD_CORE
- 	default n
- 	help
- 	  Say y here to enable QIXIS system controller api. The qixis driver
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0001-sdk-arm64-dts-add-update-DPAA1-include-files-for-SDK.patch b/target/linux/layerscape/patches-5.4/302-dts-0001-sdk-arm64-dts-add-update-DPAA1-include-files-for-SDK.patch
deleted file mode 100644
index cdded8a844..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0001-sdk-arm64-dts-add-update-DPAA1-include-files-for-SDK.patch
+++ /dev/null
@@ -1,550 +0,0 @@
-From fd5901a48f68c74f074ea5c490377b7c9f3899f5 Mon Sep 17 00:00:00 2001
-From: Li Yang <leoyang.li@nxp.com>
-Date: Fri, 5 Oct 2018 17:52:23 -0500
-Subject: [PATCH] sdk: arm64: dts: add/update DPAA1 include files for SDK
- flavor
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
-Signed-off-by: Li Yang <leoyang.li@nxp.com>
----
- .../boot/dts/freescale/qoriq-bman-portals-sdk.dtsi | 55 +++++++++++++++++
- arch/arm64/boot/dts/freescale/qoriq-dpaa-eth.dtsi  | 72 ++++++++++++++++++++++
- .../boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi    |  9 +--
- .../boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi    |  9 +--
- .../boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi     |  5 +-
- .../boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi     |  5 +-
- .../boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi     |  5 +-
- .../boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi     |  5 +-
- .../boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi     |  5 +-
- .../boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi     |  5 +-
- .../boot/dts/freescale/qoriq-fman3-0-6oh.dtsi      | 47 ++++++++++++++
- arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi   | 52 +++++++++++++++-
- .../boot/dts/freescale/qoriq-qman-portals-sdk.dtsi | 38 ++++++++++++
- 13 files changed, 291 insertions(+), 21 deletions(-)
- create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman-portals-sdk.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/qoriq-dpaa-eth.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-6oh.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman-portals-sdk.dtsi
-
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals-sdk.dtsi
-@@ -0,0 +1,55 @@
-+/*
-+ * QorIQ BMan SDK Portals device tree nodes
-+ *
-+ * Copyright 2011-2016 Freescale Semiconductor Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-+ */
-+
-+&bportals {
-+	bman-portal@0 {
-+		cell-index = <0>;
-+	};
-+
-+	bman-portal@10000 {
-+		cell-index = <1>;
-+	};
-+
-+	bman-portal@20000 {
-+		cell-index = <2>;
-+	};
-+
-+	bman-portal@30000 {
-+		cell-index = <3>;
-+	};
-+
-+	bman-portal@40000 {
-+		cell-index = <4>;
-+	};
-+
-+	bman-portal@50000 {
-+		cell-index = <5>;
-+	};
-+
-+	bman-portal@60000 {
-+		cell-index = <6>;
-+	};
-+
-+	bman-portal@70000 {
-+		cell-index = <7>;
-+	};
-+
-+	bman-portal@80000 {
-+		cell-index = <8>;
-+	};
-+
-+	bman-portal@90000 {
-+		cell-index = <9>;
-+	};
-+
-+	 bman-bpids@0 {
-+		compatible = "fsl,bpid-range";
-+		fsl,bpid-range = <32 32>;
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/qoriq-dpaa-eth.dtsi
-@@ -0,0 +1,72 @@
-+/*
-+ * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x400000 ]
-+ *
-+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+fsldpaa: fsl,dpaa {
-+	compatible = "fsl,ls1043a-dpaa", "simple-bus", "fsl,dpaa";
-+	ethernet@0 {
-+		compatible = "fsl,dpa-ethernet";
-+		fsl,fman-mac = <&enet0>;
-+		dma-coherent;
-+	};
-+	ethernet@1 {
-+		compatible = "fsl,dpa-ethernet";
-+		fsl,fman-mac = <&enet1>;
-+		dma-coherent;
-+	};
-+	ethernet@2 {
-+		compatible = "fsl,dpa-ethernet";
-+		fsl,fman-mac = <&enet2>;
-+		dma-coherent;
-+	};
-+	ethernet@3 {
-+		compatible = "fsl,dpa-ethernet";
-+		fsl,fman-mac = <&enet3>;
-+		dma-coherent;
-+	};
-+	ethernet@4 {
-+		compatible = "fsl,dpa-ethernet";
-+		fsl,fman-mac = <&enet4>;
-+		dma-coherent;
-+	};
-+	ethernet@5 {
-+		compatible = "fsl,dpa-ethernet";
-+		fsl,fman-mac = <&enet5>;
-+		dma-coherent;
-+	};
-+	ethernet@8 {
-+		compatible = "fsl,dpa-ethernet";
-+		fsl,fman-mac = <&enet6>;
-+		dma-coherent;
-+	};
-+};
---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
-+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
-@@ -9,19 +9,20 @@
- fman@1a00000 {
- 	fman0_rx_0x10: port@90000 {
- 		cell-index = <0x10>;
--		compatible = "fsl,fman-v3-port-rx";
-+		compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx";
- 		reg = <0x90000 0x1000>;
- 		fsl,fman-10g-port;
- 	};
- 
- 	fman0_tx_0x30: port@b0000 {
- 		cell-index = <0x30>;
--		compatible = "fsl,fman-v3-port-tx";
-+		compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx";
- 		reg = <0xb0000 0x1000>;
- 		fsl,fman-10g-port;
-+		fsl,qman-channel-id = <0x800>;
- 	};
- 
--	ethernet@f0000 {
-+	mac9: ethernet@f0000 {
- 		cell-index = <0x8>;
- 		compatible = "fsl,fman-memac";
- 		reg = <0xf0000 0x1000>;
-@@ -29,7 +30,7 @@ fman@1a00000 {
- 		pcsphy-handle = <&pcsphy6>;
- 	};
- 
--	mdio@f1000 {
-+	mdio9: mdio@f1000 {
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
-+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
-@@ -9,19 +9,20 @@
- fman@1a00000 {
- 	fman0_rx_0x11: port@91000 {
- 		cell-index = <0x11>;
--		compatible = "fsl,fman-v3-port-rx";
-+		compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx";
- 		reg = <0x91000 0x1000>;
- 		fsl,fman-10g-port;
- 	};
- 
- 	fman0_tx_0x31: port@b1000 {
- 		cell-index = <0x31>;
--		compatible = "fsl,fman-v3-port-tx";
-+		compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx";
- 		reg = <0xb1000 0x1000>;
- 		fsl,fman-10g-port;
-+		fsl,qman-channel-id = <0x801>;
- 	};
- 
--	ethernet@f2000 {
-+	mac10: ethernet@f2000 {
- 		cell-index = <0x9>;
- 		compatible = "fsl,fman-memac";
- 		reg = <0xf2000 0x1000>;
-@@ -29,7 +30,7 @@ fman@1a00000 {
- 		pcsphy-handle = <&pcsphy7>;
- 	};
- 
--	mdio@f3000 {
-+	mdio10: mdio@f3000 {
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
-+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
-@@ -9,14 +9,15 @@
- fman@1a00000 {
- 	fman0_rx_0x08: port@88000 {
- 		cell-index = <0x8>;
--		compatible = "fsl,fman-v3-port-rx";
-+		compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
- 		reg = <0x88000 0x1000>;
- 	};
- 
- 	fman0_tx_0x28: port@a8000 {
- 		cell-index = <0x28>;
--		compatible = "fsl,fman-v3-port-tx";
-+		compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
- 		reg = <0xa8000 0x1000>;
-+		fsl,qman-channel-id = <0x802>;
- 	};
- 
- 	ethernet@e0000 {
---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
-+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
-@@ -9,14 +9,15 @@
- fman@1a00000 {
- 	fman0_rx_0x09: port@89000 {
- 		cell-index = <0x9>;
--		compatible = "fsl,fman-v3-port-rx";
-+		compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
- 		reg = <0x89000 0x1000>;
- 	};
- 
- 	fman0_tx_0x29: port@a9000 {
- 		cell-index = <0x29>;
--		compatible = "fsl,fman-v3-port-tx";
-+		compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
- 		reg = <0xa9000 0x1000>;
-+		fsl,qman-channel-id = <0x803>;
- 	};
- 
- 	ethernet@e2000 {
---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
-+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
-@@ -9,14 +9,15 @@
- fman@1a00000 {
- 	fman0_rx_0x0a: port@8a000 {
- 		cell-index = <0xa>;
--		compatible = "fsl,fman-v3-port-rx";
-+		compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
- 		reg = <0x8a000 0x1000>;
- 	};
- 
- 	fman0_tx_0x2a: port@aa000 {
- 		cell-index = <0x2a>;
--		compatible = "fsl,fman-v3-port-tx";
-+		compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
- 		reg = <0xaa000 0x1000>;
-+		fsl,qman-channel-id = <0x804>;
- 	};
- 
- 	ethernet@e4000 {
---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
-+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
-@@ -9,14 +9,15 @@
- fman@1a00000 {
- 	fman0_rx_0x0b: port@8b000 {
- 		cell-index = <0xb>;
--		compatible = "fsl,fman-v3-port-rx";
-+		compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
- 		reg = <0x8b000 0x1000>;
- 	};
- 
- 	fman0_tx_0x2b: port@ab000 {
- 		cell-index = <0x2b>;
--		compatible = "fsl,fman-v3-port-tx";
-+		compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
- 		reg = <0xab000 0x1000>;
-+		fsl,qman-channel-id = <0x805>;
- 	};
- 
- 	ethernet@e6000 {
---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
-+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
-@@ -9,14 +9,15 @@
- fman@1a00000 {
- 	fman0_rx_0x0c: port@8c000 {
- 		cell-index = <0xc>;
--		compatible = "fsl,fman-v3-port-rx";
-+		compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
- 		reg = <0x8c000 0x1000>;
- 	};
- 
- 	fman0_tx_0x2c: port@ac000 {
- 		cell-index = <0x2c>;
--		compatible = "fsl,fman-v3-port-tx";
-+		compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
- 		reg = <0xac000 0x1000>;
-+		fsl,qman-channel-id = <0x806>;
- 	};
- 
- 	ethernet@e8000 {
---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
-+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
-@@ -9,14 +9,15 @@
- fman@1a00000 {
- 	fman0_rx_0x0d: port@8d000 {
- 		cell-index = <0xd>;
--		compatible = "fsl,fman-v3-port-rx";
-+		compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
- 		reg = <0x8d000 0x1000>;
- 	};
- 
- 	fman0_tx_0x2d: port@ad000 {
- 		cell-index = <0x2d>;
--		compatible = "fsl,fman-v3-port-tx";
-+		compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
- 		reg = <0xad000 0x1000>;
-+		fsl,qman-channel-id = <0x807>;
- 	};
- 
- 	ethernet@ea000 {
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-6oh.dtsi
-@@ -0,0 +1,47 @@
-+/*
-+ * QorIQ FMan v3 OH ports device tree
-+ *
-+ * Copyright 2012-2015 Freescale Semiconductor Inc.
-+ *
-+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-+ */
-+
-+fman@1a00000 {
-+
-+	fman0_oh1: port@82000 {
-+		cell-index = <0>;
-+		compatible = "fsl,fman-port-oh";
-+		reg = <0x82000 0x1000>;
-+	};
-+
-+	fman0_oh2: port@83000 {
-+		cell-index = <1>;
-+		compatible = "fsl,fman-port-oh";
-+		reg = <0x83000 0x1000>;
-+	};
-+
-+	fman0_oh3: port@84000 {
-+		cell-index = <2>;
-+		compatible = "fsl,fman-port-oh";
-+		reg = <0x84000 0x1000>;
-+	};
-+
-+	fman0_oh4: port@85000 {
-+		cell-index = <3>;
-+		compatible = "fsl,fman-port-oh";
-+		reg = <0x85000 0x1000>;
-+	};
-+
-+	fman0_oh5: port@86000 {
-+		cell-index = <4>;
-+		compatible = "fsl,fman-port-oh";
-+		reg = <0x86000 0x1000>;
-+	};
-+
-+	fman0_oh6: port@87000 {
-+		cell-index = <5>;
-+		compatible = "fsl,fman-port-oh";
-+		reg = <0x87000 0x1000>;
-+	};
-+
-+};
---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
-+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
-@@ -20,45 +20,95 @@ fman0: fman@1a00000 {
- 	fsl,qman-channel-range = <0x800 0x10>;
- 	ptimer-handle = <&ptp_timer0>;
- 
-+	cc {
-+		compatible = "fsl,fman-cc";
-+	};
-+
- 	muram@0 {
- 		compatible = "fsl,fman-muram";
- 		reg = <0x0 0x60000>;
- 	};
- 
-+	bmi@80000 {
-+		compatible = "fsl,fman-bmi";
-+		reg = <0x80000 0x400>;
-+	};
-+
-+	qmi@80400 {
-+		compatible = "fsl,fman-qmi";
-+		reg = <0x80400 0x400>;
-+	};
-+
- 	fman0_oh_0x2: port@82000 {
- 		cell-index = <0x2>;
- 		compatible = "fsl,fman-v3-port-oh";
- 		reg = <0x82000 0x1000>;
-+		fsl,qman-channel-id = <0x809>;
- 	};
- 
- 	fman0_oh_0x3: port@83000 {
- 		cell-index = <0x3>;
- 		compatible = "fsl,fman-v3-port-oh";
- 		reg = <0x83000 0x1000>;
-+		fsl,qman-channel-id = <0x80a>;
- 	};
- 
- 	fman0_oh_0x4: port@84000 {
- 		cell-index = <0x4>;
- 		compatible = "fsl,fman-v3-port-oh";
- 		reg = <0x84000 0x1000>;
-+		fsl,qman-channel-id = <0x80b>;
- 	};
- 
- 	fman0_oh_0x5: port@85000 {
- 		cell-index = <0x5>;
- 		compatible = "fsl,fman-v3-port-oh";
- 		reg = <0x85000 0x1000>;
-+		fsl,qman-channel-id = <0x80c>;
- 	};
- 
- 	fman0_oh_0x6: port@86000 {
- 		cell-index = <0x6>;
- 		compatible = "fsl,fman-v3-port-oh";
- 		reg = <0x86000 0x1000>;
-+		fsl,qman-channel-id = <0x80d>;
- 	};
- 
- 	fman0_oh_0x7: port@87000 {
- 		cell-index = <0x7>;
- 		compatible = "fsl,fman-v3-port-oh";
- 		reg = <0x87000 0x1000>;
-+		fsl,qman-channel-id = <0x80e>;
-+	};
-+
-+	policer@c0000 {
-+		compatible = "fsl,fman-policer";
-+		reg = <0xc0000 0x1000>;
-+	};
-+
-+	keygen@c1000 {
-+		compatible = "fsl,fman-keygen";
-+		reg = <0xc1000 0x1000>;
-+	};
-+
-+	dma@c2000 {
-+		compatible = "fsl,fman-dma";
-+		reg = <0xc2000 0x1000>;
-+	};
-+
-+	fpm@c3000 {
-+		compatible = "fsl,fman-fpm";
-+		reg = <0xc3000 0x1000>;
-+	};
-+
-+	parser@c7000 {
-+		compatible = "fsl,fman-parser";
-+		reg = <0xc7000 0x1000>;
-+	};
-+
-+	vsps@dc000 {
-+		compatible = "fsl,fman-vsps";
-+		reg = <0xdc000 0x1000>;
- 	};
- 
- 	mdio0: mdio@fc000 {
-@@ -77,7 +127,7 @@ fman0: fman@1a00000 {
- };
- 
- ptp_timer0: ptp-timer@1afe000 {
--	compatible = "fsl,fman-ptp-timer";
-+	compatible = "fsl,fman-ptp-timer", "fsl,fman-rtc";
- 	reg = <0x0 0x1afe000 0x0 0x1000>;
- 	interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- 	clocks = <&clockgen 3 0>;
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals-sdk.dtsi
-@@ -0,0 +1,38 @@
-+/*
-+ * QorIQ QMan SDK Portals device tree nodes
-+ *
-+ * Copyright 2011-2016 Freescale Semiconductor Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-+ */
-+
-+&qportals {
-+	qman-fqids@0 {
-+		compatible = "fsl,fqid-range";
-+		fsl,fqid-range = <256 256>;
-+	};
-+
-+	qman-fqids@1 {
-+		compatible = "fsl,fqid-range";
-+		fsl,fqid-range = <32768 32768>;
-+	};
-+
-+	qman-pools@0 {
-+		compatible = "fsl,pool-channel-range";
-+		fsl,pool-channel-range = <0x401 0xf>;
-+	};
-+
-+	qman-cgrids@0 {
-+		compatible = "fsl,cgrid-range";
-+		fsl,cgrid-range = <0 256>;
-+	};
-+
-+	qman-ceetm@0 {
-+		compatible = "fsl,qman-ceetm";
-+		fsl,ceetm-lfqid-range = <0xf00000 0x1000>;
-+		fsl,ceetm-sp-range = <0 16>;
-+		fsl,ceetm-lni-range = <0 8>;
-+		fsl,ceetm-channel-range = <0 32>;
-+	};
-+};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0002-sdk-arm64-dts-add-DPAA1-SDK-flavor-dts-files.patch b/target/linux/layerscape/patches-5.4/302-dts-0002-sdk-arm64-dts-add-DPAA1-SDK-flavor-dts-files.patch
deleted file mode 100644
index 8a53e9278c..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0002-sdk-arm64-dts-add-DPAA1-SDK-flavor-dts-files.patch
+++ /dev/null
@@ -1,626 +0,0 @@
-From 7f3b260e937238632e523306089e856d0db1a4f9 Mon Sep 17 00:00:00 2001
-From: Li Yang <leoyang.li@nxp.com>
-Date: Fri, 5 Oct 2018 18:03:25 -0500
-Subject: [PATCH] sdk: arm64: dts: add DPAA1 SDK flavor dts files
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
-Signed-off-by: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
-Signed-off-by: Li Yang <leoyang.li@nxp.com>
----
- arch/arm64/boot/dts/freescale/Makefile             |   6 ++
- .../boot/dts/freescale/fsl-ls1043a-qds-sdk.dts     |  71 +++++++++++++
- .../boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts     |  71 +++++++++++++
- .../boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts  | 117 +++++++++++++++++++++
- .../boot/dts/freescale/fsl-ls1046a-qds-sdk.dts     |  79 ++++++++++++++
- .../boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts     | 115 ++++++++++++++++++++
- .../boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts  | 110 +++++++++++++++++++
- 7 files changed, 569 insertions(+)
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts
-
---- a/arch/arm64/boot/dts/freescale/Makefile
-+++ b/arch/arm64/boot/dts/freescale/Makefile
-@@ -7,10 +7,16 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds-sdk.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb-sdk.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb-usdpaa.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds-sdk.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb-sdk.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb-usdpaa.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts
-@@ -0,0 +1,71 @@
-+/*
-+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
-+ *
-+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
-+ *
-+ * Mingkai Hu <Mingkai.hu@freescale.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPLv2 or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This library is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This library is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "fsl-ls1043a-qds.dts"
-+#include "qoriq-qman-portals-sdk.dtsi"
-+#include "qoriq-bman-portals-sdk.dtsi"
-+
-+&bman_fbpr {
-+	compatible = "fsl,bman-fbpr";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+&qman_fqd {
-+	compatible = "fsl,qman-fqd";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+&qman_pfdr {
-+	compatible = "fsl,qman-pfdr";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+
-+&soc {
-+#include "qoriq-dpaa-eth.dtsi"
-+#include "qoriq-fman3-0-6oh.dtsi"
-+};
-+
-+&fman0 {
-+	compatible = "fsl,fman", "simple-bus";
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts
-@@ -0,0 +1,71 @@
-+/*
-+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
-+ *
-+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
-+ *
-+ * Mingkai Hu <Mingkai.hu@freescale.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPLv2 or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This library is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This library is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "fsl-ls1043a-rdb.dts"
-+#include "qoriq-qman-portals-sdk.dtsi"
-+#include "qoriq-bman-portals-sdk.dtsi"
-+
-+&bman_fbpr {
-+	compatible = "fsl,bman-fbpr";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+&qman_fqd {
-+	compatible = "fsl,qman-fqd";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+&qman_pfdr {
-+	compatible = "fsl,qman-pfdr";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+
-+&soc {
-+#include "qoriq-dpaa-eth.dtsi"
-+#include "qoriq-fman3-0-6oh.dtsi"
-+};
-+
-+&fman0 {
-+	compatible = "fsl,fman", "simple-bus";
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts
-@@ -0,0 +1,117 @@
-+/*
-+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
-+ *
-+ * Copyright (C) 2014-2015, Freescale Semiconductor
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include "fsl-ls1043a-rdb-sdk.dts"
-+
-+&soc {
-+	bp7: buffer-pool@7 {
-+		compatible = "fsl,p4080-bpool", "fsl,bpool";
-+		fsl,bpid = <7>;
-+		fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
-+		fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
-+	};
-+
-+	bp8: buffer-pool@8 {
-+		compatible = "fsl,p4080-bpool", "fsl,bpool";
-+		fsl,bpid = <8>;
-+		fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
-+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
-+	};
-+
-+	bp9: buffer-pool@9 {
-+		compatible = "fsl,p4080-bpool", "fsl,bpool";
-+		fsl,bpid = <9>;
-+		fsl,bpool-ethernet-cfg = <0 0 0 2048 0 0xfeedabba>;
-+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
-+	};
-+
-+	fsl,dpaa {
-+		compatible = "fsl,ls1043a", "fsl,dpaa", "simple-bus";
-+
-+		ethernet@0 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x50 1 0x51 1>;
-+			fsl,qman-frame-queues-tx = <0x70 1 0x71 1>;
-+		};
-+
-+		ethernet@1 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x52 1 0x53 1>;
-+			fsl,qman-frame-queues-tx = <0x72 1 0x73 1>;
-+		};
-+
-+		ethernet@2 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x54 1 0x55 1>;
-+			fsl,qman-frame-queues-tx = <0x74 1 0x75 1>;
-+		};
-+
-+		ethernet@3 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x56 1 0x57 1>;
-+			fsl,qman-frame-queues-tx = <0x76 1 0x77 1>;
-+		};
-+
-+		ethernet@4 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x58 1 0x59 1>;
-+			fsl,qman-frame-queues-tx = <0x78 1 0x79 1>;
-+		};
-+
-+		ethernet@5 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x60 1 0x61 1>;
-+			fsl,qman-frame-queues-tx = <0x80 1 0x81 1>;
-+		};
-+
-+		ethernet@8 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x5c 1 0x5d 1>;
-+			fsl,qman-frame-queues-tx = <0x7c 1 0x7d 1>;
-+
-+		};
-+		dpa-fman0-oh@2 {
-+			compatible = "fsl,dpa-oh";
-+			/* Define frame queues for the OH port*/
-+			/* <OH Rx error, OH Rx default> */
-+			fsl,qman-frame-queues-oh = <0x5a 1 0x5b 1>;
-+			fsl,fman-oh-port = <&fman0_oh2>;
-+		};
-+	};
-+};
-+/ {
-+	reserved-memory {
-+		#address-cells = <2>;
-+		#size-cells = <2>;
-+		ranges;
-+
-+		usdpaa_mem: usdpaa_mem {
-+			compatible = "fsl,usdpaa-mem";
-+			alloc-ranges = <0 0 0x10000 0>;
-+			size = <0 0x10000000>;
-+			alignment = <0 0x10000000>;
-+		};
-+	};
-+};
-+
-+&fman0 {
-+	fman0_oh2: port@83000 {
-+		cell-index = <1>;
-+		compatible = "fsl,fman-port-oh";
-+		reg = <0x83000 0x1000>;
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
-@@ -0,0 +1,79 @@
-+/*
-+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
-+ *
-+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
-+ *
-+ * Mingkai Hu <Mingkai.hu@freescale.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPLv2 or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This library is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This library is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "fsl-ls1046a-qds.dts"
-+#include "qoriq-qman-portals-sdk.dtsi"
-+#include "qoriq-bman-portals-sdk.dtsi"
-+
-+&bman_fbpr {
-+	compatible = "fsl,bman-fbpr";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+&qman_fqd {
-+	compatible = "fsl,qman-fqd";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+&qman_pfdr {
-+	compatible = "fsl,qman-pfdr";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+
-+&soc {
-+#include "qoriq-dpaa-eth.dtsi"
-+#include "qoriq-fman3-0-6oh.dtsi"
-+};
-+
-+&fsldpaa {
-+	ethernet@9 {
-+		compatible = "fsl,dpa-ethernet";
-+		fsl,fman-mac = <&enet7>;
-+		dma-coherent;
-+	};
-+};
-+
-+&fman0 {
-+	compatible = "fsl,fman", "simple-bus";
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
-@@ -0,0 +1,115 @@
-+/*
-+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
-+ *
-+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
-+ *
-+ * Mingkai Hu <Mingkai.hu@freescale.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPLv2 or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This library is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This library is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "fsl-ls1046a-rdb.dts"
-+#include "qoriq-qman-portals-sdk.dtsi"
-+#include "qoriq-bman-portals-sdk.dtsi"
-+
-+&bman_fbpr {
-+	compatible = "fsl,bman-fbpr";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+&qman_fqd {
-+	compatible = "fsl,qman-fqd";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+&qman_pfdr {
-+	compatible = "fsl,qman-pfdr";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+
-+&soc {
-+#include "qoriq-dpaa-eth.dtsi"
-+#include "qoriq-fman3-0-6oh.dtsi"
-+};
-+
-+&fsldpaa {
-+	ethernet@0 {
-+		status = "disabled";
-+	};
-+	ethernet@1 {
-+		status = "disabled";
-+	};
-+	ethernet@9 {
-+		compatible = "fsl,dpa-ethernet";
-+		fsl,fman-mac = <&enet7>;
-+		dma-coherent;
-+	};
-+};
-+
-+&fman0 {
-+	compatible = "fsl,fman", "simple-bus";
-+};
-+
-+&mdio9 {
-+	pcsphy6: ethernet-phy@0 {
-+		backplane-mode = "10gbase-kr";
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		reg = <0x0>;
-+		fsl,lane-handle = <&serdes1>;
-+		fsl,lane-reg = <0x8C0 0x40>;   /* lane D */
-+	};
-+};
-+
-+&mdio10 {
-+	pcsphy7: ethernet-phy@0 {
-+		backplane-mode = "10gbase-kr";
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		reg = <0x0>;
-+		fsl,lane-handle = <&serdes1>;
-+		fsl,lane-reg = <0x880 0x40>;   /* lane C */
-+	};
-+};
-+
-+/* Update MAC connections to backplane PHYs
-+ * &mac9 {
-+ *	phy-handle = <&pcsphy6>;
-+ *};
-+ *
-+ *&mac10 {
-+ *	phy-handle = <&pcsphy7>;
-+ *};
-+*/
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts
-@@ -0,0 +1,110 @@
-+/*
-+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
-+ *
-+ * Copyright (C) 2016, Freescale Semiconductor
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include "fsl-ls1046a-rdb-sdk.dts"
-+
-+&soc {
-+	bp7: buffer-pool@7 {
-+		compatible = "fsl,ls1046a-bpool", "fsl,bpool";
-+		fsl,bpid = <7>;
-+		fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
-+		fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
-+	};
-+
-+	bp8: buffer-pool@8 {
-+		compatible = "fsl,ls1046a-bpool", "fsl,bpool";
-+		fsl,bpid = <8>;
-+		fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
-+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
-+	};
-+
-+	bp9: buffer-pool@9 {
-+		compatible = "fsl,ls1046a-bpool", "fsl,bpool";
-+		fsl,bpid = <9>;
-+		fsl,bpool-ethernet-cfg = <0 0 0 2048 0 0xfeedabba>;
-+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
-+	};
-+
-+	fsl,dpaa {
-+		compatible = "fsl,ls1046a", "fsl,dpaa", "simple-bus";
-+
-+		ethernet@2 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x54 1 0x55 1>;
-+			fsl,qman-frame-queues-tx = <0x74 1 0x75 1>;
-+		};
-+
-+		ethernet@3 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x56 1 0x57 1>;
-+			fsl,qman-frame-queues-tx = <0x76 1 0x77 1>;
-+		};
-+
-+		ethernet@4 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x58 1 0x59 1>;
-+			fsl,qman-frame-queues-tx = <0x78 1 0x79 1>;
-+		};
-+
-+		ethernet@5 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x5a 1 0x5b 1>;
-+			fsl,qman-frame-queues-tx = <0x7a 1 0x7b 1>;
-+		};
-+
-+		ethernet@8 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x5c 1 0x5d 1>;
-+			fsl,qman-frame-queues-tx = <0x7c 1 0x7d 1>;
-+		};
-+
-+		ethernet@9 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x5e 1 0x5f 1>;
-+			fsl,qman-frame-queues-tx = <0x7e 1 0x7f 1>;
-+		};
-+
-+		dpa-fman0-oh@2 {
-+			compatible = "fsl,dpa-oh";
-+			/* Define frame queues for the OH port*/
-+			/* <OH Rx error, OH Rx default> */
-+			fsl,qman-frame-queues-oh = <0x60 1 0x61 1>;
-+			fsl,fman-oh-port = <&fman0_oh2>;
-+		};
-+	};
-+};
-+/ {
-+	reserved-memory {
-+		#address-cells = <2>;
-+		#size-cells = <2>;
-+		ranges;
-+
-+		usdpaa_mem: usdpaa_mem {
-+			compatible = "fsl,usdpaa-mem";
-+			alloc-ranges = <0 0 0x10000 0>;
-+			size = <0 0x10000000>;
-+			alignment = <0 0x10000000>;
-+		};
-+	};
-+};
-+
-+&fman0 {
-+	fman0_oh2: port@83000 {
-+		cell-index = <1>;
-+		compatible = "fsl,fman-port-oh";
-+		reg = <0x83000 0x1000>;
-+	};
-+};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0003-arm64-dts-ls1012a-Add-LS1012A-2G5RDB-board-support.patch b/target/linux/layerscape/patches-5.4/302-dts-0003-arm64-dts-ls1012a-Add-LS1012A-2G5RDB-board-support.patch
deleted file mode 100644
index 56501c39c8..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0003-arm64-dts-ls1012a-Add-LS1012A-2G5RDB-board-support.patch
+++ /dev/null
@@ -1,114 +0,0 @@
-From 3261cabf5607c9f434faa4930ab5c2b0150579c4 Mon Sep 17 00:00:00 2001
-From: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-Date: Wed, 29 Nov 2017 06:23:14 +0530
-Subject: [PATCH] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support
-
-LS1012A-2G5RDB is a different design from LS1012ARDB,
-but has some common SoC features. Key feature on this
-board is 2.5Gbps SGMII.
-
-Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-Signed-off-by: Li Yang <leoyang.li@nxp.com>
----
- arch/arm64/boot/dts/freescale/Makefile             |  1 +
- .../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts      | 86 ++++++++++++++++++++++
- 2 files changed, 87 insertions(+)
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
-
---- a/arch/arm64/boot/dts/freescale/Makefile
-+++ b/arch/arm64/boot/dts/freescale/Makefile
-@@ -1,4 +1,5 @@
- # SPDX-License-Identifier: GPL-2.0
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
-@@ -0,0 +1,86 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree file for NXP LS1012A 2G5RDB Board.
-+ *
-+ * Copyright 2017 NXP
-+ *
-+ * Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
-+ */
-+/dts-v1/;
-+
-+#include "fsl-ls1012a.dtsi"
-+
-+/ {
-+	model = "LS1012A 2G5RDB Board";
-+	compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
-+
-+	aliases {
-+		ethernet0 = &pfe_mac0;
-+		ethernet1 = &pfe_mac1;
-+	};
-+};
-+
-+&duart0 {
-+	status = "okay";
-+};
-+
-+&i2c0 {
-+	status = "okay";
-+};
-+
-+&qspi {
-+	num-cs = <2>;
-+	bus-num = <0>;
-+	status = "okay";
-+
-+	qflash0: s25fs512s@0 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-max-frequency = <20000000>;
-+		m25p,fast-read;
-+		reg = <0>;
-+	};
-+};
-+
-+&sata {
-+	status = "okay";
-+};
-+
-+&pfe {
-+	status = "okay";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	ethernet@0 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x0>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "sgmii-2500";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x1>; /* enabled/disabled */
-+		};
-+	};
-+
-+	ethernet@1 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x1>;	/* GEM_ID */
-+		fsl,gemac-bus-id = < 0x0>;	/* BUS_ID */
-+		fsl,gemac-phy-id = < 0x2>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "sgmii-2500";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x0>; /* enabled/disabled */
-+		};
-+	};
-+};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch b/target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch
deleted file mode 100644
index 97348131ef..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From 9ba5a56b7241c46aa47544f8414ad1f3d445f3c1 Mon Sep 17 00:00:00 2001
-From: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-Date: Mon, 7 May 2018 11:52:04 +0530
-Subject: [PATCH] arm64: dts: ls1012a: Add more nodes to LS1012A-FRWY board
- support
-
-LS1012A-FRWY is a different design from LS1012A-FRDM,
-but has some common SoC features. Key feature on this
-board is 2x1G SGMII PFE MAC, Micro SD, USB 3.0, DDR,
-QuadSPI, Audio, UART.
-
-Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-Signed-off-by: Li Yang <leoyang.li@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts | 118 +++++++++++++++++++++
- 1 file changed, 118 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
-@@ -14,6 +14,58 @@
- / {
- 	model = "LS1012A FRWY Board";
- 	compatible = "fsl,ls1012a-frwy", "fsl,ls1012a";
-+
-+	aliases {
-+		ethernet0 = &pfe_mac0;
-+		ethernet1 = &pfe_mac1;
-+	};
-+
-+	sys_mclk: clock-mclk {
-+		compatible = "fixed-clock";
-+		#clock-cells = <0>;
-+		clock-frequency = <25000000>;
-+	};
-+
-+	reg_1p8v: regulator-1p8v {
-+		compatible = "regulator-fixed";
-+		regulator-name = "1P8V";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <1800000>;
-+		regulator-always-on;
-+	};
-+
-+	sound {
-+		compatible = "simple-audio-card";
-+		simple-audio-card,format = "i2s";
-+		simple-audio-card,widgets =
-+			"Microphone", "Microphone Jack",
-+			"Headphone", "Headphone Jack",
-+			"Speaker", "Speaker Ext",
-+			"Line", "Line In Jack";
-+		simple-audio-card,routing =
-+			"MIC_IN", "Microphone Jack",
-+			"Microphone Jack", "Mic Bias",
-+			"LINE_IN", "Line In Jack",
-+			"Headphone Jack", "HP_OUT",
-+			"Speaker Ext", "LINE_OUT";
-+
-+		simple-audio-card,cpu {
-+			sound-dai = <&sai2>;
-+			frame-master;
-+			bitclock-master;
-+		};
-+
-+		simple-audio-card,codec {
-+			sound-dai = <&codec>;
-+			frame-master;
-+			bitclock-master;
-+			system-clock-frequency = <25000000>;
-+		};
-+	};
-+};
-+
-+&pcie {
-+	status = "okay";
- };
- 
- &duart0 {
-@@ -22,4 +74,70 @@
- 
- &i2c0 {
- 	status = "okay";
-+
-+	codec: sgtl5000@a {
-+		compatible = "fsl,sgtl5000";
-+		#sound-dai-cells = <0>;
-+		reg = <0xa>;
-+		VDDA-supply = <&reg_1p8v>;
-+		VDDIO-supply = <&reg_1p8v>;
-+		clocks = <&sys_mclk>;
-+	};
-+};
-+
-+&qspi {
-+	num-cs = <1>;
-+	bus-num = <0>;
-+	status = "okay";
-+
-+	qflash0: w25q16dw@0 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		m25p,fast-read;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+	};
-+};
-+
-+&pfe {
-+	status = "okay";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	ethernet@0 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x0>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "sgmii";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x1>; /* enabled/disabled */
-+		};
-+	};
-+
-+	ethernet@1 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x1>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "sgmii";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x0>; /* enabled/disabled */
-+		};
-+	};
-+};
-+
-+&sai2 {
-+	status = "okay";
- };
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0005-arm64-dts-ls2081ardb-Add-DTS-support-for-NXP-LS2081A.patch b/target/linux/layerscape/patches-5.4/302-dts-0005-arm64-dts-ls2081ardb-Add-DTS-support-for-NXP-LS2081A.patch
deleted file mode 100644
index 38941722ff..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0005-arm64-dts-ls2081ardb-Add-DTS-support-for-NXP-LS2081A.patch
+++ /dev/null
@@ -1,164 +0,0 @@
-From 5508bc9764760ca32990d5f7fa494be78e711ff6 Mon Sep 17 00:00:00 2001
-From: Li Yang <leoyang.li@nxp.com>
-Date: Fri, 5 Oct 2018 18:22:46 -0500
-Subject: [PATCH] arm64: dts: ls2081ardb: Add DTS support for NXP LS2081ARDB
-
-This patch add support for NXP LS2081ARDB board which has
-LS2081A SoC.
-
-LS2081A SoC is 40-pin derivative of LS2088A SoC
-So, from functional perspective both are same.
-Hence,ls2088a SoC dtsi files are included from ls2081ARDB dts
-
-Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
-Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
-Signed-off-by: Tao Yang <b31903@freescale.com>
-Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
-Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
-Signed-off-by: Li Yang <leoyang.li@nxp.com>
----
- arch/arm64/boot/dts/freescale/Makefile            |   1 +
- arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts | 127 ++++++++++++++++++++++
- 2 files changed, 128 insertions(+)
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
-
---- a/arch/arm64/boot/dts/freescale/Makefile
-+++ b/arch/arm64/boot/dts/freescale/Makefile
-@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
-@@ -0,0 +1,127 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree file for NXP LS2081A RDB Board.
-+ *
-+ * Copyright 2017 NXP
-+ *
-+ * Priyanka Jain <priyanka.jain@nxp.com>
-+ *
-+ */
-+
-+/dts-v1/;
-+
-+#include "fsl-ls2088a.dtsi"
-+
-+/ {
-+	model = "NXP Layerscape 2081A RDB Board";
-+	compatible = "fsl,ls2081a-rdb", "fsl,ls2081a";
-+
-+	aliases {
-+		serial0 = &serial0;
-+		serial1 = &serial1;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial1:115200n8";
-+	};
-+};
-+
-+&esdhc {
-+	status = "okay";
-+};
-+
-+&ifc {
-+	status = "disabled";
-+};
-+
-+&i2c0 {
-+	status = "okay";
-+	pca9547@75 {
-+		compatible = "nxp,pca9547";
-+		reg = <0x75>;
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		i2c@1 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <0x01>;
-+			rtc@51 {
-+				compatible = "nxp,pcf2129";
-+				reg = <0x51>;
-+			};
-+		};
-+
-+		i2c@2 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <0x02>;
-+
-+			ina220@40 {
-+				compatible = "ti,ina220";
-+				reg = <0x40>;
-+				shunt-resistor = <500>;
-+			};
-+		};
-+
-+		i2c@3 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <0x3>;
-+
-+			adt7481@4c {
-+				compatible = "adi,adt7461";
-+				reg = <0x4c>;
-+			};
-+		};
-+	};
-+};
-+
-+&dspi {
-+	status = "okay";
-+	dflash0: n25q512a@0 {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		compatible = "st,m25p80";
-+		spi-max-frequency = <3000000>;
-+		reg = <0>;
-+	};
-+};
-+
-+&qspi {
-+	status = "okay";
-+	fsl,qspi-has-second-chip;
-+	flash0: s25fs512s@0 {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		compatible = "spansion,m25p80";
-+		spi-rx-bus-width = <4>;
-+		spi-tx-bus-width = <4>;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+	};
-+	flash1: s25fs512s@1 {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-rx-bus-width = <4>;
-+		spi-tx-bus-width = <4>;
-+		compatible = "spansion,m25p80";
-+		spi-max-frequency = <20000000>;
-+		reg = <1>;
-+	};
-+};
-+
-+&sata0 {
-+	status = "okay";
-+};
-+
-+&sata1 {
-+	status = "okay";
-+};
-+
-+&usb0 {
-+	status = "okay";
-+};
-+
-+&usb1 {
-+	status = "okay";
-+};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0006-arm64-dts-ls1012a-accumulated-change-for-ls1012a-boa.patch b/target/linux/layerscape/patches-5.4/302-dts-0006-arm64-dts-ls1012a-accumulated-change-for-ls1012a-boa.patch
deleted file mode 100644
index 413fcaf120..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0006-arm64-dts-ls1012a-accumulated-change-for-ls1012a-boa.patch
+++ /dev/null
@@ -1,461 +0,0 @@
-From 8fd1ab38e922383fa87db60c48c44ab0d5e6f1c1 Mon Sep 17 00:00:00 2001
-From: Li Yang <leoyang.li@nxp.com>
-Date: Thu, 2 May 2019 15:52:49 -0500
-Subject: [PATCH] arm64: dts: ls1012a: accumulated change for ls1012a boards
-
-commit 65c558ec270003e8e99cb58c940d3b913d08fa39
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Tue May 15 08:47:19 2018 +0800
-
-    arm64: dts: ls1012a: correct the register range of dcfg
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit 8f7b4cded4ea1fca53516ae8f5d5bc89af291f26
-Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-Date:   Mon May 7 11:52:04 2018 +0530
-
-    arm64: dts: ls1012a: Add LS1012A-FRWY board support
-
-    LS1012A-FRWY is a different design from LS1012A-FRDM,
-    but has some common SoC features. Key feature on this
-    board is 2x1G SGMII PFE MAC, Micro SD, USB 3.0, DDR,
-    QuadSPI, Audio, UART.
-
-    Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-
-commit 94fc77837b3b6f4213a49b29ddc3e09e38ae5fbb
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Mon Apr 2 16:16:47 2018 +0800
-
-    arm64: dts: ls1012a: add dts entry for A-010650
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit d4164a6d8cffd8f09c451073754834d58b7ace19
-Author: Suresh Gupta <suresh.gupta@nxp.com>
-Date:   Thu Feb 1 23:44:15 2018 +0530
-
-    arm64: dts: freescale: ls1012a: Add DT nodes for qspi
-
-    Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
-    Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
-
-commit 4fdc98a03492b732a48426a4180f7d6a36847e71
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Wed Nov 1 10:31:47 2017 +0800
-
-    arm64: dts: ls1012a: correct the i2c clock to 1/4 platform pll
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit bb534725996b92aff853a4dee43738629fd4ac08
-Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-Date:   Wed Nov 29 06:31:23 2017 +0530
-
-    arm64: dts: freescale: ls1012a: Disable PCIe node as default
-
-    Keep PCIe node in "disabled" status as SoC default.
-    Only enable it for boards with PCIe circuit designed,
-    such as LS1012ARDB and LS1012AQDS.
-
-    Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-
-commit 6b9a3244baba2c5126f349800ecaad83ba97ee47
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Mon Oct 16 12:25:19 2017 +0530
-
-    arm64: dts: freescale: ls1012a: fix RGMII tx delay issue
-
-    Recently logic to enable RGMII tx delay was changed by
-    below patch.
-
-    https://patchwork.kernel.org/patch/9447581/
-
-    Based on the patch, enabling tx delay again using rgmii-txid.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-    Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
-
-commit 1e17e247088f6e2c08041559e38053b70a9d2bbe
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Sat Sep 16 14:20:23 2017 +0530
-
-    arm64: dts: freescale: ls1012a: update with pppfe support
-
-            Update ls1012a dtsi and platform dts files with
-    support for ppfe.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-    Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
-
-commit e9661ed864d2a9d437057f97729410bb9af994f2
-Author: Suresh Gupta <suresh.gupta@nxp.com>
-Date:   Tue May 16 17:17:21 2017 +0530
-
-    arm64: dts: ls1012a: add the DTS node for QSPI support
-
-    There is a s25fs512s qspi flash on QDS, RDB and FRDM board.
-
-    Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
-
-commit ed9c51239461fe0322da2e93f50033ea0d05bc4f
-Author: Chenhui Zhao <chenhui.zhao@nxp.com>
-Date:   Fri May 5 17:45:15 2017 +0800
-
-    arm64: dts: ls1012a: add ftm0 node
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 58 ++++++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts  | 62 ++++++++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts  | 62 ++++++++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi     | 68 +++++++++++++++++++++-
- 4 files changed, 248 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
-@@ -13,6 +13,11 @@
- 	model = "LS1012A Freedom Board";
- 	compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
- 
-+	aliases {
-+		ethernet0 = &pfe_mac0;
-+		ethernet1 = &pfe_mac1;
-+	};
-+
- 	sys_mclk: clock-mclk {
- 		compatible = "fixed-clock";
- 		#clock-cells = <0>;
-@@ -74,6 +79,44 @@
- 	};
- };
- 
-+&pfe {
-+	status = "okay";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	ethernet@0 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x0>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "sgmii";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x1>; /* enabled/disabled */
-+		};
-+	};
-+
-+	ethernet@1 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x1>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "sgmii";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x0>; /* enabled/disabled */
-+		};
-+	};
-+};
-+
- &sai2 {
- 	status = "okay";
- };
-@@ -81,3 +124,18 @@
- &sata {
- 	status = "okay";
- };
-+
-+&qspi {
-+	status = "okay";
-+	qflash0: s25fs512s@0 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-max-frequency = <20000000>;
-+		m25p,fast-read;
-+		reg = <0>;
-+		spi-rx-bus-width = <2>;
-+		spi-tx-bus-width = <2>;
-+	};
-+
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
-@@ -13,6 +13,11 @@
- 	model = "LS1012A QDS Board";
- 	compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
- 
-+	aliases {
-+		ethernet0 = &pfe_mac0;
-+		ethernet1 = &pfe_mac1;
-+	};
-+
- 	sys_mclk: clock-mclk {
- 		compatible = "fixed-clock";
- 		#clock-cells = <0>;
-@@ -57,6 +62,10 @@
- 	};
- };
- 
-+&pcie {
-+	status = "okay";
-+};
-+
- &dspi {
- 	bus-num = <0>;
- 	status = "okay";
-@@ -128,6 +137,44 @@
- 	};
- };
- 
-+&pfe {
-+	status = "okay";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	ethernet@0 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x0>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x2>;
-+		phy-mode = "sgmii-2500";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x1>; /* enabled/disabled */
-+		};
-+	};
-+
-+	ethernet@1 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x1>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x3>;
-+		phy-mode = "sgmii-2500";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x0>; /* enabled/disabled */
-+		};
-+	};
-+};
-+
- &sai2 {
- 	status = "okay";
- };
-@@ -135,3 +182,18 @@
- &sata {
- 	status = "okay";
- };
-+
-+&qspi {
-+	status = "okay";
-+	qflash0: s25fs512s@0 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-max-frequency = <20000000>;
-+		m25p,fast-read;
-+		reg = <0>;
-+		spi-rx-bus-width = <2>;
-+		spi-tx-bus-width = <2>;
-+	};
-+
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-@@ -12,6 +12,15 @@
- / {
- 	model = "LS1012A RDB Board";
- 	compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
-+
-+	aliases {
-+		ethernet0 = &pfe_mac0;
-+		ethernet1 = &pfe_mac1;
-+	};
-+};
-+
-+&pcie {
-+	status = "okay";
- };
- 
- &duart0 {
-@@ -38,3 +47,56 @@
- &sata {
- 	status = "okay";
- };
-+
-+&pfe {
-+	status = "okay";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	ethernet@0 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x0>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "sgmii";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x1>; /* enabled/disabled */
-+		};
-+	};
-+
-+	ethernet@1 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x1>;	/* GEM_ID */
-+		fsl,gemac-bus-id = < 0x1 >;	/* BUS_ID */
-+		fsl,gemac-phy-id = < 0x1 >;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "rgmii-txid";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x0>; /* enabled/disabled */
-+		};
-+	};
-+};
-+
-+&qspi {
-+	status = "okay";
-+	qflash0: s25fs512s@0 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-max-frequency = <20000000>;
-+		m25p,fast-read;
-+		reg = <0>;
-+		spi-rx-bus-width = <2>;
-+		spi-tx-bus-width = <2>;
-+	};
-+
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-@@ -261,7 +261,7 @@
- 		dcfg: dcfg@1ee0000 {
- 			compatible = "fsl,ls1012a-dcfg",
- 				     "syscon";
--			reg = <0x0 0x1ee0000 0x0 0x10000>;
-+			reg = <0x0 0x1ee0000 0x0 0x1000>;
- 			big-endian;
- 		};
- 
-@@ -318,13 +318,23 @@
- 			#thermal-sensor-cells = <1>;
- 		};
- 
-+		ftm0: ftm0@29d0000 {
-+			compatible = "fsl,ftm-alarm";
-+			reg = <0x0 0x29d0000 0x0 0x10000>,
-+			      <0x0 0x1ee2140 0x0 0x4>;
-+			reg-names = "ftm", "FlexTimer1";
-+			interrupts = <0 86 0x4>;
-+			big-endian;
-+		};
-+
- 		i2c0: i2c@2180000 {
--			compatible = "fsl,vf610-i2c";
-+			compatible = "fsl,vf610-i2c", "fsl,ls1012a-vf610-i2c";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <0x0 0x2180000 0x0 0x10000>;
- 			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&clockgen 4 3>;
-+			scl-gpios = <&gpio0 13 0>;
- 			status = "disabled";
- 		};
- 
-@@ -396,6 +406,20 @@
- 			big-endian;
- 		};
- 
-+		qspi: spi@1550000 {
-+			compatible = "fsl,ls1012a-qspi", "fsl,ls1021a-qspi";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <0x0 0x1550000 0x0 0x10000>,
-+				<0x0 0x40000000 0x0 0x10000000>;
-+			reg-names = "QuadSPI", "QuadSPI-memory";
-+			interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
-+			clock-names = "qspi_en", "qspi";
-+			clocks = <&clockgen 4 0>, <&clockgen 4 0>;
-+			big-endian;
-+			status = "disabled";
-+		};
-+
- 		sai1: sai@2b50000 {
- 			#sound-dai-cells = <0>;
- 			compatible = "fsl,vf610-sai";
-@@ -500,6 +524,46 @@
- 					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
- 			status = "disabled";
- 		};
-+
-+		rcpm: rcpm@1ee2000 {
-+			compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1";
-+			reg = <0x0 0x1ee2000 0x0 0x1000>;
-+			fsl,#rcpm-wakeup-cells = <1>;
-+		};
-+	};
-+
-+	reserved-memory {
-+		#address-cells = <2>;
-+		#size-cells = <2>;
-+		ranges;
-+
-+		pfe_reserved: packetbuffer@83400000 {
-+			reg = <0 0x83400000 0 0xc00000>;
-+		};
-+	};
-+
-+	pfe: pfe@04000000 {
-+		compatible = "fsl,pfe";
-+		reg =   <0x0 0x04000000 0x0 0xc00000>,	/* AXI 16M */
-+			<0x0 0x83400000 0x0 0xc00000>;  /* PFE DDR 12M */
-+		reg-names = "pfe", "pfe-ddr";
-+		fsl,pfe-num-interfaces = <0x2>;
-+		interrupts = <0 172 0x4>,    /* HIF interrupt */
-+			     <0 173 0x4>,    /*HIF_NOCPY interrupt */
-+			     <0 174 0x4>;    /* WoL interrupt */
-+		interrupt-names = "pfe_hif", "pfe_hif_nocpy", "pfe_wol";
-+		memory-region = <&pfe_reserved>;
-+		fsl,pfe-scfg = <&scfg 0>;
-+		fsl,rcpm-wakeup = <&rcpm 0xf0000020>;
-+		clocks = <&clockgen 4 0>;
-+		clock-names = "pfe";
-+
-+		status = "okay";
-+		pfe_mac0: ethernet@0 {
-+		};
-+
-+		pfe_mac1: ethernet@1 {
-+		};
- 	};
- 
- 	firmware {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0007-arm64-dts-ls1043a-accumulated-change-for-ls1043a-boa.patch b/target/linux/layerscape/patches-5.4/302-dts-0007-arm64-dts-ls1043a-accumulated-change-for-ls1043a-boa.patch
deleted file mode 100644
index 91f789af13..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0007-arm64-dts-ls1043a-accumulated-change-for-ls1043a-boa.patch
+++ /dev/null
@@ -1,574 +0,0 @@
-From 794b9e55c77bf0ef34dfdb3b151a845c004b3ce3 Mon Sep 17 00:00:00 2001
-From: Li Yang <leoyang.li@nxp.com>
-Date: Thu, 2 May 2019 16:01:01 -0500
-Subject: [PATCH] arm64: dts: ls1043a: accumulated change for ls1043a boards
-
-commit 118e2f48ee8da3f5547c24888bd6fdb78f03b7ce
-Author: Peng Ma <peng.ma@nxp.com>
-Date:   Wed Jul 25 08:53:07 2018 +0000
-
-    dts: fsl-ls1021a, fsl-ls1043a, fsl-ls1046a: add multi block node
-support
-
-    add block-offset to support different virtual block offset for qdma
-    base on soc;
-    the interrupt named "qdma-queueN(N:0,1,2,3)" correspond to a virtual
-    block,N based on block number of qdma;
-
-    Signed-off-by: Peng Ma <peng.ma@nxp.com>
-
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Mon Apr 2 16:22:40 2018 +0800
-
-    arm64: dts: ls1043a: add dts entry for A-010650
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit a47e4bd0b5d076feb6d81601c16d5b79e53a92c8
-Author: Rajesh Bhagat <rajesh.bhagat@freescale.com>
-Date:   Wed Jan 27 11:37:25 2016 +0530
-
-    arm64: dts: ls1043a: Add configure-gfladj property to USB3 node
-
-    Add "configure-gfladj" boolean property to USB3 node. This property
-    is used to determine whether frame length adjustent is required
-    or not
-
-    Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
-    Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-
-commit 38566bbd5ca6747b30d2f0c251bbcfe0723df8c6
-Author: Changming Huang <jerry.huang@nxp.com>
-Date:   Wed Apr 19 12:49:50 2017 +0800
-
-    arm/arm64: dts: Add property snps incr burst type adjustment for
-INCR burst type for dwc3
-
-    Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
-    Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-
-commit 8632d84e0fe187aa023a24f0dad0040c53e12450
-Author: Abhimanyu Saini <abhimanyu.saini@nxp.com>
-Date:   Thu Jan 25 11:31:13 2018 +0530
-
-    arm64: dts: freescale: ls1043a: Modify DT nodes for qspi
-
-    Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
-
-commit b1dc1ebed79e9aaab75fd06837d794ec2f1b624d
-Author: Ran Wang <ran.wang_1@nxp.com>
-Date:   Fri Jan 5 15:14:48 2018 +0800
-
-    arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
-
-    Enable USB3 HW LPM feature for ls1043a and active patch for
-    snps erratum A-010131. It will disable U1/U2 temperary when
-    initiate U3 request.
-
-    Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-
-commit 9b17a5fcf8da5656ff99ebef3d63ba040e9f676d
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Tue Jun 13 13:14:26 2017 +0800
-
-    arm64: dts: correct the register range of dcfg
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit f60e39fd51ad702e3a2613faaca40871a4763735
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Tue Aug 22 18:04:02 2017 +0800
-
-    arm64: dts: ls1043a: add pcf85263 rtc nodes
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit 67c82e3c7b376139d7cee624589bedbc311f8868
-Author: jiaheng.fan <jiaheng.fan@nxp.com>
-Date:   Thu May 11 17:36:33 2017 +0800
-
-    arm64: dts: ls1021/ls1043/ls1046: add qdma nodes
-    Signed-off-by: jiaheng.fan <jiaheng.fan@nxp.com>
-
-commit c6d9c2498ee83669f9853100301edff9a5905caf
-Author: Wang Dongsheng <dongsheng.wang@nxp.com>
-Date:   Fri Apr 21 13:26:07 2017 +0800
-
-    arm64: dts: ls1043a: add ftm0 nodes
-
-    Add rcpm and ftm0 nodes. The Power Management related features
-    need these nodes.
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit 3bcdc4de0a1c9e6f4a4ddc916e8efe8044d8bbfd
-Author: Po Liu <po.liu@nxp.com>
-Date:   Fri Sep 30 17:11:36 2016 +0800
-
-    arm64: dts: ls1043/ls2080: add pcie aer/pme interrupt-name property
-
-    Some platforms(NXP Layerscape for example) aer/pme interrupts was
-not
-    MSI/MSI-X/INTx but using interrupt line independently. This patch
-    add "aer", "pme" interrupt-names for aer/pme interrupt.
-
-    With the interrupt-names "aer", "pme" code could probe aer/pme
-interrupt
-    line for pcie root port, replace the aer/pme interrupt service irqs.
-
-    This is intend to fixup the Layerscape platforms which aer/pmes
-interrupts
-    was not MSI/MSI-X/INTx, but using interrupt line independently.
-
-    Since the interrupt-names "intr" never been used. Remove it.
-
-    Signed-off-by: Po Liu <po.liu@nxp.com>
-    Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-
-commit 4d20ecf029f1255520b30c103e1724c618b981c7
-Author: Zhao Qiang <qiang.zhao@nxp.com>
-Date:   Sun Jun 12 15:51:44 2016 +0800
-
-    arm64: dts: ls1043ardb: add ds26522 node
-
-    add ds26522 node to fsl-ls1043a-rdb.dts
-
-    Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
-
-commit ca470562646ab058814fc4a1195016fb3266cdf5
-Author: Zhao Qiang <qiang.zhao@nxp.com>
-Date:   Sun Jun 12 15:44:11 2016 +0800
-
-    arm64: dts: ls1043ardb: add qe node
-
-    Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 162 ++++++++++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts |  36 +++++
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi    | 108 +++++++++++++--
- 3 files changed, 295 insertions(+), 11 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
-@@ -24,6 +24,22 @@
- 		serial1 = &duart1;
- 		serial2 = &duart2;
- 		serial3 = &duart3;
-+		sgmii_riser_s1_p1 = &sgmii_phy_s1_p1;
-+		sgmii_riser_s2_p1 = &sgmii_phy_s2_p1;
-+		sgmii_riser_s3_p1 = &sgmii_phy_s3_p1;
-+		sgmii_riser_s4_p1 = &sgmii_phy_s4_p1;
-+		qsgmii_s1_p1 = &qsgmii_phy_s1_p1;
-+		qsgmii_s1_p2 = &qsgmii_phy_s1_p2;
-+		qsgmii_s1_p3 = &qsgmii_phy_s1_p3;
-+		qsgmii_s1_p4 = &qsgmii_phy_s1_p4;
-+		qsgmii_s2_p1 = &qsgmii_phy_s2_p1;
-+		qsgmii_s2_p2 = &qsgmii_phy_s2_p2;
-+		qsgmii_s2_p3 = &qsgmii_phy_s2_p3;
-+		qsgmii_s2_p4 = &qsgmii_phy_s2_p4;
-+		emi1_slot1 = &ls1043mdio_s1;
-+		emi1_slot2 = &ls1043mdio_s2;
-+		emi1_slot3 = &ls1043mdio_s3;
-+		emi1_slot4 = &ls1043mdio_s4;
- 	};
- 
- 	chosen {
-@@ -64,6 +80,8 @@
- 	fpga: board-control@2,0 {
- 		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
- 		reg = <0x2 0x0 0x0000100>;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
- 	};
- };
- 
-@@ -149,3 +167,147 @@
- };
- 
- #include "fsl-ls1043-post.dtsi"
-+
-+&fman0 {
-+	ethernet@e0000 {
-+		phy-handle = <&qsgmii_phy_s2_p1>;
-+		phy-connection-type = "sgmii";
-+	};
-+
-+	ethernet@e2000 {
-+		phy-handle = <&qsgmii_phy_s2_p2>;
-+		phy-connection-type = "sgmii";
-+	};
-+
-+	ethernet@e4000 {
-+		phy-handle = <&rgmii_phy1>;
-+		phy-connection-type = "rgmii";
-+	};
-+
-+	ethernet@e6000 {
-+		phy-handle = <&rgmii_phy2>;
-+		phy-connection-type = "rgmii";
-+	};
-+
-+	ethernet@e8000 {
-+		phy-handle = <&qsgmii_phy_s2_p3>;
-+		phy-connection-type = "sgmii";
-+	};
-+
-+	ethernet@ea000 {
-+		phy-handle = <&qsgmii_phy_s2_p4>;
-+		phy-connection-type = "sgmii";
-+	};
-+
-+	ethernet@f0000 { /* DTSEC9/10GEC1 */
-+		fixed-link = <1 1 10000 0 0>;
-+		phy-connection-type = "xgmii";
-+	};
-+};
-+
-+&fpga {
-+	mdio-mux-emi1 {
-+		compatible = "mdio-mux-mmioreg", "mdio-mux";
-+		mdio-parent-bus = <&mdio0>;
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x54 1>;    /* BRDCFG4 */
-+		mux-mask = <0xe0>; /* EMI1 */
-+
-+		/* On-board RGMII1 PHY */
-+		ls1043mdio0: mdio@0 {
-+			reg = <0>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			rgmii_phy1: ethernet-phy@1 { /* MAC3 */
-+				reg = <0x1>;
-+			};
-+		};
-+
-+		/* On-board RGMII2 PHY */
-+		ls1043mdio1: mdio@1 {
-+			reg = <0x20>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			rgmii_phy2: ethernet-phy@2 { /* MAC4 */
-+				reg = <0x2>;
-+			};
-+		};
-+
-+		/* Slot 1 */
-+		ls1043mdio_s1: mdio@2 {
-+			reg = <0x40>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+
-+			qsgmii_phy_s1_p1: ethernet-phy@4 {
-+				reg = <0x4>;
-+			};
-+			qsgmii_phy_s1_p2: ethernet-phy@5 {
-+				reg = <0x5>;
-+			};
-+			qsgmii_phy_s1_p3: ethernet-phy@6 {
-+				reg = <0x6>;
-+			};
-+			qsgmii_phy_s1_p4: ethernet-phy@7 {
-+				reg = <0x7>;
-+			};
-+
-+			sgmii_phy_s1_p1: ethernet-phy@1c {
-+				reg = <0x1c>;
-+			};
-+		};
-+
-+		/* Slot 2 */
-+		ls1043mdio_s2: mdio@3 {
-+			reg = <0x60>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+
-+			qsgmii_phy_s2_p1: ethernet-phy@8 {
-+				reg = <0x8>;
-+			};
-+			qsgmii_phy_s2_p2: ethernet-phy@9 {
-+				reg = <0x9>;
-+			};
-+			qsgmii_phy_s2_p3: ethernet-phy@a {
-+				reg = <0xa>;
-+			};
-+			qsgmii_phy_s2_p4: ethernet-phy@b {
-+				reg = <0xb>;
-+			};
-+
-+			sgmii_phy_s2_p1: ethernet-phy@1c {
-+				reg = <0x1c>;
-+			};
-+		};
-+
-+		/* Slot 3 */
-+		ls1043mdio_s3: mdio@4 {
-+			reg = <0x80>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+
-+			sgmii_phy_s3_p1: ethernet-phy@1c {
-+				reg = <0x1c>;
-+			};
-+		};
-+
-+		/* Slot 4 */
-+		ls1043mdio_s4: mdio@5 {
-+			reg = <0xa0>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+
-+			sgmii_phy_s4_p1: ethernet-phy@1c {
-+				reg = <0x1c>;
-+			};
-+		};
-+	};
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
-@@ -49,6 +49,10 @@
- 		compatible = "pericom,pt7c4338";
- 		reg = <0x68>;
- 	};
-+	rtc@51 {
-+		compatible = "nxp,pcf85263";
-+		reg = <0x51>;
-+	};
- };
- 
- &ifc {
-@@ -94,6 +98,38 @@
- 		reg = <0>;
- 		spi-max-frequency = <1000000>; /* input clock */
- 	};
-+
-+	slic@2 {
-+		compatible = "maxim,ds26522";
-+		reg = <2>;
-+		spi-max-frequency = <2000000>;
-+		fsl,spi-cs-sck-delay = <100>;
-+		fsl,spi-sck-cs-delay = <50>;
-+	};
-+
-+	slic@3 {
-+		compatible = "maxim,ds26522";
-+		reg = <3>;
-+		spi-max-frequency = <2000000>;
-+		fsl,spi-cs-sck-delay = <100>;
-+		fsl,spi-sck-cs-delay = <50>;
-+	};
-+};
-+
-+&uqe {
-+	ucc_hdlc: ucc@2000 {
-+		compatible = "fsl,ucc-hdlc";
-+		rx-clock-name = "clk8";
-+		tx-clock-name = "clk9";
-+		fsl,rx-sync-clock = "rsync_pin";
-+		fsl,tx-sync-clock = "tsync_pin";
-+		fsl,tx-timeslot-mask = <0xfffffffe>;
-+		fsl,rx-timeslot-mask = <0xfffffffe>;
-+		fsl,tdm-framer-type = "e1";
-+		fsl,tdm-id = <0>;
-+		fsl,siram-entry-id = <0>;
-+		fsl,tdm-interface;
-+	};
- };
- 
- &duart0 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -278,7 +278,7 @@
- 
- 		dcfg: dcfg@1ee0000 {
- 			compatible = "fsl,ls1043a-dcfg", "syscon";
--			reg = <0x0 0x1ee0000 0x0 0x10000>;
-+			reg = <0x0 0x1ee0000 0x0 0x1000>;
- 			big-endian;
- 		};
- 
-@@ -412,7 +412,7 @@
- 		};
- 
- 		i2c0: i2c@2180000 {
--			compatible = "fsl,vf610-i2c";
-+			compatible = "fsl,vf610-i2c", "fsl,ls1043a-vf610-i2c";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <0x0 0x2180000 0x0 0x10000>;
-@@ -422,6 +422,7 @@
- 			dmas = <&edma0 1 39>,
- 			       <&edma0 1 38>;
- 			dma-names = "tx", "rx";
-+			scl-gpios = <&gpio4 12 0>;
- 			status = "disabled";
- 		};
- 
-@@ -526,6 +527,72 @@
- 			#interrupt-cells = <2>;
- 		};
- 
-+		uqe: uqe@2400000 {
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			device_type = "qe";
-+			compatible = "fsl,qe", "simple-bus";
-+			ranges = <0x0 0x0 0x2400000 0x40000>;
-+			reg = <0x0 0x2400000 0x0 0x480>;
-+			brg-frequency = <100000000>;
-+			bus-frequency = <200000000>;
-+
-+			fsl,qe-num-riscs = <1>;
-+			fsl,qe-num-snums = <28>;
-+
-+			qeic: qeic@80 {
-+				compatible = "fsl,qe-ic";
-+				reg = <0x80 0x80>;
-+				#address-cells = <0>;
-+				interrupt-controller;
-+				#interrupt-cells = <1>;
-+				interrupts = <0 77 0x04 0 77 0x04>;
-+			};
-+
-+			si1: si@700 {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				compatible = "fsl,ls1043-qe-si",
-+						"fsl,t1040-qe-si";
-+				reg = <0x700 0x80>;
-+			};
-+
-+			siram1: siram@1000 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "fsl,ls1043-qe-siram",
-+						"fsl,t1040-qe-siram";
-+				reg = <0x1000 0x800>;
-+			};
-+
-+			ucc@2000 {
-+				cell-index = <1>;
-+				reg = <0x2000 0x200>;
-+				interrupts = <32>;
-+				interrupt-parent = <&qeic>;
-+			};
-+
-+			ucc@2200 {
-+				cell-index = <3>;
-+				reg = <0x2200 0x200>;
-+				interrupts = <34>;
-+				interrupt-parent = <&qeic>;
-+			};
-+
-+			muram@10000 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "fsl,qe-muram", "fsl,cpm-muram";
-+				ranges = <0x0 0x10000 0x6000>;
-+
-+				data-only@0 {
-+					compatible = "fsl,qe-muram-data",
-+					"fsl,cpm-muram-data";
-+					reg = <0x0 0x6000>;
-+				};
-+			};
-+		};
-+
- 		lpuart0: serial@2950000 {
- 			compatible = "fsl,ls1021a-lpuart";
- 			reg = <0x0 0x2950000 0x0 0x1000>;
-@@ -580,6 +647,16 @@
- 			status = "disabled";
- 		};
- 
-+		ftm0: ftm0@29d0000 {
-+			compatible = "fsl,ftm-alarm";
-+			reg = <0x0 0x29d0000 0x0 0x10000>,
-+			      <0x0 0x1ee2140 0x0 0x4>;
-+			reg-names = "ftm", "FlexTimer1";
-+			interrupts = <0 86 0x4>;
-+			big-endian;
-+			status = "okay";
-+		};
-+
- 		wdog0: wdog@2ad0000 {
- 			compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
- 			reg = <0x0 0x2ad0000 0x0 0x10000>;
-@@ -612,7 +689,10 @@
- 			dr_mode = "host";
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
-+			usb3-lpm-capable;
-+			snps,dis-u1u2-when-u3-quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			configure-gfladj;
- 		};
- 
- 		usb1: usb3@3000000 {
-@@ -622,7 +702,10 @@
- 			dr_mode = "host";
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
-+			usb3-lpm-capable;
-+			snps,dis-u1u2-when-u3-quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			configure-gfladj;
- 		};
- 
- 		usb2: usb3@3100000 {
-@@ -632,7 +715,10 @@
- 			dr_mode = "host";
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
-+			usb3-lpm-capable;
-+			snps,dis-u1u2-when-u3-quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			configure-gfladj;
- 		};
- 
- 		sata: sata@3200000 {
-@@ -671,9 +757,9 @@
- 			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
- 			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
- 			reg-names = "regs", "config";
--			interrupts = <0 118 0x4>, /* controller interrupt */
--				     <0 117 0x4>; /* PME interrupt */
--			interrupt-names = "intr", "pme";
-+			interrupts = <0 117 0x4>, /* PME interrupt */
-+				     <0 118 0x4>; /* aer interrupt */
-+			interrupt-names = "pme", "aer";
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 			device_type = "pci";
-@@ -697,9 +783,9 @@
- 			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
- 			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
- 			reg-names = "regs", "config";
--			interrupts = <0 128 0x4>,
--				     <0 127 0x4>;
--			interrupt-names = "intr", "pme";
-+			interrupts = <0 127 0x4>,
-+				     <0 128 0x4>;
-+			interrupt-names = "pme", "aer";
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 			device_type = "pci";
-@@ -723,9 +809,9 @@
- 			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
- 			       0x50 0x00000000 0x0 0x00002000>; /* configuration space */
- 			reg-names = "regs", "config";
--			interrupts = <0 162 0x4>,
--				     <0 161 0x4>;
--			interrupt-names = "intr", "pme";
-+			interrupts = <0 161 0x4>,
-+				     <0 162 0x4>;
-+			interrupt-names = "pme", "aer";
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 			device_type = "pci";
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0008-arm64-dts-ls1046a-accumulated-change-to-ls1046a-boar.patch b/target/linux/layerscape/patches-5.4/302-dts-0008-arm64-dts-ls1046a-accumulated-change-to-ls1046a-boar.patch
deleted file mode 100644
index 91e930768d..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0008-arm64-dts-ls1046a-accumulated-change-to-ls1046a-boar.patch
+++ /dev/null
@@ -1,366 +0,0 @@
-From 229d32330c7d941b8e04501ad75bc527f6cf1b1c Mon Sep 17 00:00:00 2001
-From: Li Yang <leoyang.li@nxp.com>
-Date: Thu, 2 May 2019 16:06:42 -0500
-Subject: [PATCH] arm64: dts: ls1046a: accumulated change to ls1046a boards
-
-commit 118e2f48ee8da3f5547c24888bd6fdb78f03b7ce
-Author: Peng Ma <peng.ma@nxp.com>
-Date:   Wed Jul 25 08:53:07 2018 +0000
-
-    dts: fsl-ls1021a, fsl-ls1043a, fsl-ls1046a: add multi block node
-support
-
-    add block-offset to support different virtual block offset for qdma
-    base on soc;
-    the interrupt named "qdma-queueN(N:0,1,2,3)" correspond to a virtual
-    block,N based on block number of qdma;
-
-    Signed-off-by: Peng Ma <peng.ma@nxp.com>
-
-commit 46123df3a174f0d76c8b954a0386e64841453836
-Author: Florinel Iordache <florinel.iordache@nxp.com>
-Date:   Thu Aug 9 12:29:18 2018 +0300
-
-    arm64: dts: updates for Unified Backplane driver
-
-    Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
-
-commit c08136017e8b18eb58b153129487c5dc760afd20
-Author: Florinel Iordache <florinel.iordache@nxp.com>
-Date:   Thu Aug 9 12:23:42 2018 +0300
-
-    arm64: dts: ls1046: add support for 10GBase-KR
-
-    Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
-
-commit 8473f478783f6f601e1c6d7e6afba49a13f3a6a3
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Mon Apr 2 16:24:33 2018 +0800
-
-    arm64: dts: ls1046a: add dts entry for A-010650
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit 3159fe9263fb145601ccb07fcb9336a68fba4e08
-Author: Bao Xiaowei <xiaowei.bao@nxp.com>
-Date:   Fri Oct 13 11:04:39 2017 +0800
-
-    arm64: dts: ls1046a: add the property of IB and OB
-
-    Add the property of inbound and outbound windows number for ep
-    driver.
-
-    Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com>
-
-    Acked-by: Minghuan Lian <minghuan.Lian@nxp.com>
-    Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-
-commit c8fed58f3c9a0219fda0467791f61abd86eb97f3
-Author: Abhimanyu Saini <abhimanyu.saini@nxp.com>
-Date:   Wed Jan 24 22:56:48 2018 +0530
-
-    arm64: dts: freescale: ls1046a: Modify DT nodes for qspi
-
-    Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
-
-commit 96558859ea3a4af44c0b25441f7574ae6222509a
-Author: Ran Wang <ran.wang_1@nxp.com>
-Date:   Fri Jan 5 15:17:23 2018 +0800
-
-    arm64: dts: ls1046a: Enable usb3-lpm-capable for usb3 node
-
-    Enable USB3 HW LPM feature for ls1046a and active patch for
-    snps erratum A-010131. It will disable U1/U2 temperary when
-    initiate U3 request.
-
-    Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-
-commit 9b17a5fcf8da5656ff99ebef3d63ba040e9f676d
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Tue Jun 13 13:14:26 2017 +0800
-
-    arm64: dts: correct the register range of dcfg
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit 67c82e3c7b376139d7cee624589bedbc311f8868
-Author: jiaheng.fan <jiaheng.fan@nxp.com>
-Date:   Thu May 11 17:36:33 2017 +0800
-
-    arm64: dts: ls1021/ls1043/ls1046: add qdma nodes
-
-    Signed-off-by: jiaheng.fan <jiaheng.fan@nxp.com>
-
-commit 4a6cef0c83748ee4f6641489fc324bd64095485d
-Author: Chenhui Zhao <chenhui.zhao@nxp.com>
-Date:   Fri May 5 17:53:27 2017 +0800
-
-    arm64: dts: ls1046a: add ftm0 node
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 148 ++++++++++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts |   1 +
- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi    |  28 +++-
- 3 files changed, 174 insertions(+), 3 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
-@@ -25,6 +25,20 @@
- 		serial1 = &duart1;
- 		serial2 = &duart2;
- 		serial3 = &duart3;
-+
-+		emi1_slot1 = &ls1046mdio_s1;
-+		emi1_slot2 = &ls1046mdio_s2;
-+		emi1_slot4 = &ls1046mdio_s4;
-+
-+		sgmii_s1_p1 = &sgmii_phy_s1_p1;
-+		sgmii_s1_p2 = &sgmii_phy_s1_p2;
-+		sgmii_s1_p3 = &sgmii_phy_s1_p3;
-+		sgmii_s1_p4 = &sgmii_phy_s1_p4;
-+		sgmii_s4_p1 = &sgmii_phy_s4_p1;
-+		qsgmii_s2_p1 = &qsgmii_phy_s2_p1;
-+		qsgmii_s2_p2 = &qsgmii_phy_s2_p2;
-+		qsgmii_s2_p3 = &qsgmii_phy_s2_p3;
-+		qsgmii_s2_p4 = &qsgmii_phy_s2_p4;
- 	};
- 
- 	chosen {
-@@ -177,3 +191,137 @@
- };
- 
- #include "fsl-ls1046-post.dtsi"
-+
-+&fman0 {
-+	ethernet@e0000 {
-+		phy-handle = <&qsgmii_phy_s2_p1>;
-+		phy-connection-type = "sgmii";
-+	};
-+
-+	ethernet@e2000 {
-+		phy-handle = <&sgmii_phy_s4_p1>;
-+		phy-connection-type = "sgmii";
-+	};
-+
-+	ethernet@e4000 {
-+		phy-handle = <&rgmii_phy1>;
-+		phy-connection-type = "rgmii";
-+	};
-+
-+	ethernet@e6000 {
-+		phy-handle = <&rgmii_phy2>;
-+		phy-connection-type = "rgmii";
-+	};
-+
-+	ethernet@e8000 {
-+		phy-handle = <&sgmii_phy_s1_p3>;
-+		phy-connection-type = "sgmii";
-+	};
-+
-+	ethernet@ea000 {
-+		phy-handle = <&sgmii_phy_s1_p4>;
-+		phy-connection-type = "sgmii";
-+	};
-+
-+	ethernet@f0000 { /* DTSEC9/10GEC1 */
-+		phy-handle = <&sgmii_phy_s1_p1>;
-+		phy-connection-type = "xgmii";
-+	};
-+
-+	ethernet@f2000 { /* DTSEC10/10GEC2 */
-+		phy-handle = <&sgmii_phy_s1_p2>;
-+		phy-connection-type = "xgmii";
-+	};
-+};
-+
-+&fpga {
-+	#address-cells = <1>;
-+	#size-cells = <1>;
-+	mdio-mux-emi1 {
-+		compatible = "mdio-mux-mmioreg", "mdio-mux";
-+		mdio-parent-bus = <&mdio0>;
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x54 1>;    /* BRDCFG4 */
-+		mux-mask = <0xe0>; /* EMI1 */
-+
-+		/* On-board RGMII1 PHY */
-+		ls1046mdio0: mdio@0 {
-+			reg = <0>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			rgmii_phy1: ethernet-phy@1 { /* MAC3 */
-+				reg = <0x1>;
-+			};
-+		};
-+
-+		/* On-board RGMII2 PHY */
-+		ls1046mdio1: mdio@1 {
-+			reg = <0x20>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			rgmii_phy2: ethernet-phy@2 { /* MAC4 */
-+				reg = <0x2>;
-+			};
-+		};
-+
-+		/* Slot 1 */
-+		ls1046mdio_s1: mdio@2 {
-+			reg = <0x40>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+
-+			sgmii_phy_s1_p1: ethernet-phy@1c {
-+				reg = <0x1c>;
-+			};
-+
-+			sgmii_phy_s1_p2: ethernet-phy@1d {
-+				reg = <0x1d>;
-+			};
-+
-+			sgmii_phy_s1_p3: ethernet-phy@1e {
-+				reg = <0x1e>;
-+			};
-+
-+			sgmii_phy_s1_p4: ethernet-phy@1f {
-+				reg = <0x1f>;
-+			};
-+		};
-+
-+		/* Slot 2 */
-+		ls1046mdio_s2: mdio@3 {
-+			reg = <0x60>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+
-+			qsgmii_phy_s2_p1: ethernet-phy@8 {
-+				reg = <0x8>;
-+			};
-+			qsgmii_phy_s2_p2: ethernet-phy@9 {
-+				reg = <0x9>;
-+			};
-+			qsgmii_phy_s2_p3: ethernet-phy@a {
-+				reg = <0xa>;
-+			};
-+			qsgmii_phy_s2_p4: ethernet-phy@b {
-+				reg = <0xb>;
-+			};
-+		};
-+
-+		/* Slot 4 */
-+		ls1046mdio_s4: mdio@5 {
-+			reg = <0x80>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+
-+			sgmii_phy_s4_p1: ethernet-phy@1c {
-+				reg = <0x1c>;
-+			};
-+		};
-+	};
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
-@@ -95,6 +95,7 @@
- 
- &qspi {
- 	status = "okay";
-+	fsl,qspi-has-second-chip;
- 
- 	qflash0: flash@0 {
- 		compatible = "spansion,m25p80";
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-@@ -377,7 +377,7 @@
- 		};
- 
- 		i2c0: i2c@2180000 {
--			compatible = "fsl,vf610-i2c";
-+			compatible = "fsl,vf610-i2c", "fsl,ls1046a-vf610-i2c";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <0x0 0x2180000 0x0 0x10000>;
-@@ -386,6 +386,7 @@
- 			dmas = <&edma0 1 39>,
- 			       <&edma0 1 38>;
- 			dma-names = "tx", "rx";
-+			scl-gpios = <&gpio3 12 0>;
- 			status = "disabled";
- 		};
- 
-@@ -410,12 +411,13 @@
- 		};
- 
- 		i2c3: i2c@21b0000 {
--			compatible = "fsl,vf610-i2c";
-+			compatible = "fsl,vf610-i2c", "fsl,ls1046a-vf610-i2c";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <0x0 0x21b0000 0x0 0x10000>;
- 			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&clockgen 4 1>;
-+			scl-gpios = <&gpio3 12 0>;
- 			status = "disabled";
- 		};
- 
-@@ -545,6 +547,15 @@
- 			status = "disabled";
- 		};
- 
-+		ftm0: ftm0@29d0000 {
-+			compatible = "fsl,ftm-alarm";
-+			reg = <0x0 0x29d0000 0x0 0x10000>,
-+			      <0x0 0x1ee2140 0x0 0x4>;
-+			reg-names = "ftm", "FlexTimer1";
-+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+			big-endian;
-+		};
-+
- 		wdog0: watchdog@2ad0000 {
- 			compatible = "fsl,imx21-wdt";
- 			reg = <0x0 0x2ad0000 0x0 0x10000>;
-@@ -577,6 +588,8 @@
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			usb3-lpm-capable;
-+			snps,dis-u1u2-when-u3-quirk;
- 		};
- 
- 		usb1: usb@3000000 {
-@@ -587,6 +600,8 @@
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			usb3-lpm-capable;
-+			snps,dis-u1u2-when-u3-quirk;
- 		};
- 
- 		usb2: usb@3100000 {
-@@ -597,6 +612,8 @@
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			usb3-lpm-capable;
-+			snps,dis-u1u2-when-u3-quirk;
- 		};
- 
- 		sata: sata@3200000 {
-@@ -638,6 +655,11 @@
- 				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
- 		};
- 
-+		serdes1: serdes@1ea0000 {
-+			reg = <0x0 0x1ea0000 0 0x00002000>;
-+			compatible = "fsl,serdes-10g";
-+		};
-+
- 		pcie@3400000 {
- 			compatible = "fsl,ls1046a-pcie";
- 			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0009-arm64-dts-ls1088a-accumulated-change-to-ls1088a-boar.patch b/target/linux/layerscape/patches-5.4/302-dts-0009-arm64-dts-ls1088a-accumulated-change-to-ls1088a-boar.patch
deleted file mode 100644
index 48fbfa746a..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0009-arm64-dts-ls1088a-accumulated-change-to-ls1088a-boar.patch
+++ /dev/null
@@ -1,540 +0,0 @@
-From 2790ba4aa3e487ac29d6027eb226ed986f0e2769 Mon Sep 17 00:00:00 2001
-From: Li Yang <leoyang.li@nxp.com>
-Date: Thu, 2 May 2019 16:10:03 -0500
-Subject: [PATCH] arm64: dts: ls1088a: accumulated change to ls1088a boards
-
-commit f967940f2fb73bc7ec676dbad9f32fbf4e7fea2b
-Author: Pengbo Mu <pengbo.mu@nxp.com>
-Date:   Fri Jul 13 16:19:36 2018 +0800
-
-    arm64: dts: ls1088a: add snps incr burst type adjustment in usb0 &
-usb1
-
-    This property could fix the defect that external usb device always
-    prints this error log --- 'reset SuperSpeed USB device number n
-using
-    xhci_hcd' when system power on.
-
-    Signed-off-by: Pengbo Mu <pengbo.mu@nxp.com>
-
-commit 46123df3a174f0d76c8b954a0386e64841453836
-Author: Florinel Iordache <florinel.iordache@nxp.com>
-Date:   Thu Aug 9 12:29:18 2018 +0300
-
-    arm64: dts: updates for Unified Backplane driver
-
-    Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
-
-commit 3b214bd42d47ebe7b6af925a3ffcf09aaaaabfb9
-Author: Nipun Gupta <nipun.gupta@nxp.com>
-Date:   Sat Apr 28 00:20:48 2018 +0530
-
-    arm64: dts: ls1088: add dma-cohernet property in fsl-mc node
-
-    Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
-
-commit 240b04a98171f6774d1c3c498f8cb21f4411ac5f
-Author: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date:   Thu Apr 26 12:26:54 2018 +0300
-
-    arm64: dts: ls1088a: move fsl-mc node as a child of soc
-
-    Move the fsl-mc hardware manager node in the soc node because all
-the
-    soc settings (such as 'dma-ranges') also apply to the fsl-mc and
-need
-    to be propagated to it.
-
-    Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-
-commit 3f2f50950f763d1335181ce374a11ed118abf0fa
-Author: Nipun Gupta <nipun.gupta@nxp.com>
-Date:   Wed Apr 25 09:43:47 2018 +0530
-
-    arm64: dts: ls1088: add dma ranges property
-
-    Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
-
-commit 6afd0157e8fa2510790537855c86f8a7c1431abe
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Mon Apr 2 16:25:38 2018 +0800
-
-    arm64: dts: ls1088a: add dts entry for A-010650
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit 0f8432c30c44771f9180aa7bf7580ad1d7e7c9d3
-Author: Nipun Gupta <nipun.gupta@nxp.com>
-Date:   Mon Feb 26 10:40:37 2018 +0530
-
-    arm64: dts: ls1088a: add dma coherent property in smmu node
-
-    Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
-
-commit 6417c66b823ab380cf73ee252a998d98b28f0180
-Author: Suresh Gupta <suresh.gupta@nxp.com>
-Date:   Fri Feb 2 00:04:41 2018 +0530
-
-    arm64: dts: freescale: ls1088a: Modify DT nodes for qspi
-
-    Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
-    Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
-
-commit 01a1ea9e781d307ab87da95043ec898736495fff
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Thu Nov 2 10:36:48 2017 +0800
-
-    arm64: dts: ls1088a: correct the i2c clock to 1/8 platform pll
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit 60122f1192e1cc23e5952468cc5a884287d64907
-Author: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Date:   Thu Sep 7 10:08:31 2017 +0530
-
-    arm64: dts: ls1088a: Add iommu-map property for pci
-
-    This patch adds iommu-map property for PCIe, which enables
-    SMMU for these devices on LS1088.
-
-    Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-
-commit 43c4d0cf074106b411280c5b2be75d5d6e63fb01
-Author: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
-Date:   Mon Aug 21 11:43:07 2017 +0300
-
-    arm64: dts: ls1088a: add backplane support
-
-    Signed-off-by: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
-
-commit 57d49424694f72adbf7cf1dbeff38704f0d65359
-Author: Ashish Kumar <Ashish.Kumar@nxp.com>
-Date:   Mon Jun 19 18:32:13 2017 +0530
-
-    arm64: dts: ls1088: Add Reboot node in dtsi
-
-    Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
-
-commit ee950989a7babc240153a20fe468573e13d61f98
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Thu May 11 14:59:28 2017 +0800
-
-    arm64: dts: ls1088a: add ftm0 nodes
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit 6d3a96446a7ffccb0b9936b616d855c8d5572bce
-Author: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-Date:   Wed May 3 14:26:35 2017 +0000
-
-    arm64: dts: fsl/ls1088,ls208x: Add mdio and phy nodes
-
-    Add mdio and phy nodes for the following FSL platforms:
-    - LS1088A RDB
-    - LS2080A QDS & RDB
-    - LS2088A QDS, RDB & simu
-
-    Contains contributions from patches by the following authors:
-    Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
-    Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
-    Signed-off-by: Pratiyush Mohan Srivastava
-<pratiyush.srivastava@nxp.com>
-    Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com>
-    Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
-    Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
-    Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
-    Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
-    Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-    Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-
-commit 971ff2e74cfebb84286ec3e191f5910dded4bd41
-Author: Suresh Gupta <suresh.gupta@nxp.com>
-Date:   Thu May 4 18:04:44 2017 +0530
-
-    arm64: dts: ls1088a: Add QSPI node for QDS, RDB
-
-    This is temporary patch, will rewrite for open source
-
-    Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-    Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
-
-commit c61036e6dfe264d61cc213293040d873d863e8ac
-Author: Nipun Gupta <nipun.gupta@nxp.com>
-Date:   Thu Apr 27 23:35:15 2017 +0530
-
-    arm64: dts: add iommu-map property in fsl-mc node
-
-    Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
-
-commit a4412cc510162a900d10c8ca4add71defb3f2d97
-Author: Nipun Gupta <nipun.gupta@nxp.com>
-Date:   Wed Apr 19 22:26:15 2017 +0530
-
-    arm64: dts: add smmu device node in LS1088 devicetree
-
-    Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts |  50 ++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 104 +++++++++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi    | 108 +++++++++++++++++++++-
- 3 files changed, 261 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
-@@ -131,6 +131,30 @@
- 	};
- };
- 
-+&qspi {
-+	status = "okay";
-+	fsl,qspi-has-second-chip;
-+	qflash0: s25fs512s@0 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+		spi-rx-bus-width = <4>;
-+		spi-tx-bus-width = <4>;
-+	};
-+
-+	qflash1: s25fs512s@1 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-max-frequency = <20000000>;
-+		reg = <1>;
-+		spi-rx-bus-width = <4>;
-+		spi-tx-bus-width = <4>;
-+	};
-+};
-+
- &duart0 {
- 	status = "okay";
- };
-@@ -146,3 +170,29 @@
- &sata {
- 	status = "okay";
- };
-+
-+&pcs_mdio1 {
-+		pcs_phy1: ethernet-phy@0 {
-+		backplane-mode = "10gbase-kr";
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		reg = <0x0>;
-+		fsl,lane-handle = <&serdes1>;
-+		fsl,lane-reg = <0x840 0x40>;/* lane B */
-+	};
-+};
-+
-+&pcs_mdio2 {
-+		pcs_phy2: ethernet-phy@0 {
-+		backplane-mode = "10gbase-kr";
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		reg = <0x0>;
-+		fsl,lane-handle = <&serdes1>;
-+		fsl,lane-reg = <0x800 0x40>;/* lane A */
-+	};
-+};
-+
-+/* Update DPMAC connections to backplane PHYs, under SerDes 0x1D_0xXX.
-+ * &dpmac1 {
-+ *	phy-handle = <&pcs_phy1>;
-+ * };
-+ */
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
-@@ -74,6 +74,31 @@
- 	};
- };
- 
-+&qspi {
-+	status = "okay";
-+	fsl,qspi-has-second-chip;
-+	qflash0: s25fs512s@0 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+		spi-rx-bus-width = <4>;
-+		spi-tx-bus-width = <4>;
-+	};
-+
-+	qflash1: s25fs512s@1 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-max-frequency = <20000000>;
-+		reg = <1>;
-+		spi-rx-bus-width = <4>;
-+		spi-tx-bus-width = <4>;
-+	};
-+
-+};
-+
- &duart0 {
- 	status = "okay";
- };
-@@ -97,3 +122,82 @@
- &usb1 {
- 	status = "okay";
- };
-+
-+&emdio1 {
-+	/* Freescale F104 PHY1 */
-+	mdio1_phy1: emdio1_phy@1 {
-+		reg = <0x1c>;
-+		phy-connection-type = "qsgmii";
-+	};
-+	mdio1_phy2: emdio1_phy@2 {
-+		reg = <0x1d>;
-+		phy-connection-type = "qsgmii";
-+	};
-+	mdio1_phy3: emdio1_phy@3 {
-+		reg = <0x1e>;
-+		phy-connection-type = "qsgmii";
-+	};
-+	mdio1_phy4: emdio1_phy@4 {
-+		reg = <0x1f>;
-+		phy-connection-type = "qsgmii";
-+	};
-+	/* F104 PHY2 */
-+	mdio1_phy5: emdio1_phy@5 {
-+		reg = <0x0c>;
-+		phy-connection-type = "qsgmii";
-+	};
-+	mdio1_phy6: emdio1_phy@6 {
-+		reg = <0x0d>;
-+		phy-connection-type = "qsgmii";
-+	};
-+	mdio1_phy7: emdio1_phy@7 {
-+		reg = <0x0e>;
-+		phy-connection-type = "qsgmii";
-+	};
-+	mdio1_phy8: emdio1_phy@8 {
-+		reg = <0x0f>;
-+		phy-connection-type = "qsgmii";
-+	};
-+};
-+
-+&emdio2 {
-+	/* Aquantia AQR105 10G PHY */
-+	mdio2_phy1: emdio2_phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		interrupts = <0 2 0x4>;
-+		reg = <0x0>;
-+		phy-connection-type = "xfi";
-+	};
-+};
-+
-+/* DPMAC connections to external PHYs
-+ * based on LS1088A RM RevC - $24.1.2 SerDes Options
-+ */
-+/* DPMAC1 is 10G SFP+, fixed link */
-+&dpmac2 {
-+	phy-handle = <&mdio2_phy1>;
-+};
-+&dpmac3 {
-+	phy-handle = <&mdio1_phy5>;
-+};
-+&dpmac4 {
-+	phy-handle = <&mdio1_phy6>;
-+};
-+&dpmac5 {
-+	phy-handle = <&mdio1_phy7>;
-+};
-+&dpmac6 {
-+	phy-handle = <&mdio1_phy8>;
-+};
-+&dpmac7 {
-+	phy-handle = <&mdio1_phy1>;
-+};
-+&dpmac8 {
-+	phy-handle = <&mdio1_phy2>;
-+};
-+&dpmac9 {
-+	phy-handle = <&mdio1_phy3>;
-+};
-+&dpmac10 {
-+	phy-handle = <&mdio1_phy4>;
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-@@ -185,6 +185,19 @@
- 		clock-output-names = "sysclk";
- 	};
- 
-+	rstcr: syscon@1e60000 {
-+		compatible = "fsl,ls1088a-rstcr", "syscon";
-+		reg = <0x0 0x1e60000 0x0 0x4>;
-+	};
-+
-+	reboot {
-+		compatible = "syscon-reboot";
-+		regmap = <&rstcr>;
-+		offset = <0x0>;
-+		mask = <0x02>;
-+	};
-+
-+
- 	soc {
- 		compatible = "simple-bus";
- 		#address-cells = <2>;
-@@ -205,6 +218,11 @@
- 			little-endian;
- 		};
- 
-+		serdes1: serdes@1ea0000 {
-+				reg = <0x0 0x1ea0000 0 0x00002000>;
-+				compatible = "fsl,serdes-10g";
-+		};
-+
- 		tmu: tmu@1f80000 {
- 			compatible = "fsl,qoriq-tmu";
- 			reg = <0x0 0x1f80000 0x0 0x10000>;
-@@ -325,6 +343,72 @@
- 			#interrupt-cells = <2>;
- 		};
- 
-+		/* TODO: WRIOP (CCSR?) */
-+		emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000,
-+					  * E-MDIO1: 0x1_6000
-+					  */
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8B96000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;	/* force the driver in LE mode */
-+
-+			/* Not necessary on the QDS, but needed on the RDB */
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000,
-+					  * E-MDIO2: 0x1_7000
-+					  */
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8B97000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;	/* force the driver in LE mode */
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio1: mdio@0x8c07000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c07000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio2: mdio@0x8c0b000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c0b000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio3: mdio@0x8c0f000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c0f000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio4: mdio@0x8c13000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c13000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
- 		ifc: ifc@2240000 {
- 			compatible = "fsl,ifc", "simple-bus";
- 			reg = <0x0 0x2240000 0x0 0x20000>;
-@@ -335,13 +419,20 @@
- 			status = "disabled";
- 		};
- 
-+		ftm0: ftm0@2800000 {
-+			compatible = "fsl,ftm-alarm";
-+			reg = <0x0 0x2800000 0x0 0x10000>;
-+			interrupts = <0 44 4>;
-+		};
-+
- 		i2c0: i2c@2000000 {
--			compatible = "fsl,vf610-i2c";
-+			compatible = "fsl,vf610-i2c", "fsl,ls1088a-vf610-i2c";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <0x0 0x2000000 0x0 0x10000>;
- 			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&clockgen 4 7>;
-+			scl-gpios = <&gpio3 30 0>;
- 			status = "disabled";
- 		};
- 
-@@ -405,6 +496,7 @@
- 			dr_mode = "host";
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
-+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 			status = "disabled";
- 		};
- 
-@@ -418,6 +510,17 @@
- 			dma-coherent;
- 			status = "disabled";
- 		};
-+		qspi: spi@20c0000 {
-+			compatible = "fsl,ls2080a-qspi", "fsl,ls1088a-qspi";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <0x0 0x20c0000 0x0 0x10000>,
-+				<0x0 0x20000000 0x0 0x10000000>;
-+			reg-names = "QuadSPI", "QuadSPI-memory";
-+			interrupts = <0 25 0x4>; /* Level high type */
-+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-+			clock-names = "qspi_en", "qspi";
-+		};
- 
- 		crypto: crypto@8000000 {
- 			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
-@@ -474,6 +577,7 @@
- 			ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
- 				  0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- 			msi-parent = <&its>;
-+			iommu-map = <0 &smmu 0 1>;	/* This is fixed-up by u-boot */
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 7>;
- 			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
-@@ -499,6 +603,7 @@
- 			ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000   /* downstream I/O */
- 				  0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- 			msi-parent = <&its>;
-+			iommu-map = <0 &smmu 0 1>;	/* This is fixed-up by u-boot */
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 7>;
- 			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 IRQ_TYPE_LEVEL_HIGH>,
-@@ -524,6 +629,7 @@
- 			ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000   /* downstream I/O */
- 				  0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- 			msi-parent = <&its>;
-+			iommu-map = <0 &smmu 0 1>;	/* This is fixed-up by u-boot */
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 7>;
- 			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0010-arm64-dts-ls208xa-accumulated-change-to-ls208xa-boar.patch b/target/linux/layerscape/patches-5.4/302-dts-0010-arm64-dts-ls208xa-accumulated-change-to-ls208xa-boar.patch
deleted file mode 100644
index a763e05724..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0010-arm64-dts-ls208xa-accumulated-change-to-ls208xa-boar.patch
+++ /dev/null
@@ -1,959 +0,0 @@
-From 9d8de47b617baa4fa92d9a1502904c0373f80384 Mon Sep 17 00:00:00 2001
-From: Li Yang <leoyang.li@nxp.com>
-Date: Thu, 2 May 2019 16:12:40 -0500
-Subject: [PATCH] arm64: dts: ls208xa: accumulated change to ls208xa boards
-
-commit 46123df3a174f0d76c8b954a0386e64841453836
-Author: Florinel Iordache <florinel.iordache@nxp.com>
-Date:   Thu Aug 9 12:29:18 2018 +0300
-
-    arm64: dts: updates for Unified Backplane driver
-
-    Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
-
-commit 76a741dbb9b93ea9ab2f6122b8df5bc4f0db7676
-Author: Nipun Gupta <nipun.gupta@nxp.com>
-Date:   Sat Apr 28 00:20:16 2018 +0530
-
-    arm64: dts: ls208x: add dma-cohernet property in fsl-mc node
-
-    Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
-
-commit f6309e9dc8e0c6171a43fd6759123b5de1c574aa
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Mon Apr 2 16:27:23 2018 +0800
-
-    arm64: dts: ls208xa: add dts entry for A-010650
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit 8c37bad2038a210a4f0a369fd946aaae4317eac4
-Author: Nipun Gupta <nipun.gupta@nxp.com>
-Date:   Fri Apr 20 17:14:10 2018 +0530
-
-    arm64: dts: ls208x: add dma ranges property
-
-    Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
-
-commit 38566bbd5ca6747b30d2f0c251bbcfe0723df8c6
-Author: Changming Huang <jerry.huang@nxp.com>
-Date:   Wed Apr 19 12:49:50 2017 +0800
-
-    arm/arm64: dts: Add property snps incr burst type adjustment for
-INCR burst type for dwc3
-
-    Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
-    Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-
-commit dbb65ea8ee1d46067e756c6d64c7fe66a0058f49
-Author: Pankaj Bansal <pankaj.bansal@nxp.com>
-Date:   Mon Mar 5 12:37:04 2018 +0530
-
-    arm64: dts: ls208x: remove NXP Erratum A008585 from LS2088A.
-
-    NXP Erratum A008585 affects A57 core cluster used in LS2085rev1.
-    However this problem has been fixed in A72 core cluster used in
-LS2088.
-    Therefore remove the erratum from LS2088A. Keeping it only in
-LS2085.
-
-    Cc: <stable@vger.kernel.org> # 4.14
-    Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
-    Reviewed-by: Sandeep Malik <sandeep.malik@nxp.com>
-    Acked-by: Priyanka Jain <priyanka.jain@nxp.com>
-
-commit 85f41b0f6abe6b9d7d303790bb3712ed559890e9
-Author: Nipun Gupta <nipun.gupta@nxp.com>
-Date:   Mon Feb 26 10:39:54 2018 +0530
-
-    arm64: dts: ls208xa: add dma coherent property in smmu node
-
-    Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
-
-commit e910d8b78b823a625451b1da7ae7499dadde2ae9
-Author: Suresh Gupta <suresh.gupta@nxp.com>
-Date:   Thu Feb 1 23:49:56 2018 +0530
-
-    arm64: dts: freescale: ls208xa: Modify DT nodes for qspi
-
-    Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
-
-commit 7654ef78c8c85de3a43dfa0dffd572d589ea1332
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Wed Nov 1 10:34:04 2017 +0800
-
-    arm64: dts: ls208xa: correct the i2c clock to 1/2 platform pll
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit efdb129228baa6a999c06072338b979d783d7b60
-Author: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Date:   Thu Aug 31 14:45:02 2017 +0530
-
-    arm64: dts: ls208xa: Add iommu-map property for pci
-
-    This patch adds iommu-map property for PCIe, which enables
-    SMMU for these devices on LS208xA devices.
-
-    Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-
-commit 45af5d025eafaf4a85000e16e5f47992de663ff6
-Author: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
-Date:   Mon Aug 21 11:46:59 2017 +0300
-
-    arm64: dts: ls2088a: update backplane support with dpmac connections
-
-    Signed-off-by: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
-
-commit b2ede6c088a883fceb348e8659253b2c7cdeeff8
-Author: Santan Kumar <santan.kumar@nxp.com>
-Date:   Thu Jun 22 13:04:00 2017 +0530
-
-    arm64: dts: ls2088ardb: Update nodes for QSPI
-
-    -As per board design, different QSPI flash is connected on
-      boards, hence change QSPI flash node from s25fl256s1 to s25fs512ss
-in
-      device tree.
-    -Enable fast-read support in QSPI node.
-
-    Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
-
-commit d5324a75c56e9f9210113e51cffa846a86b50fbd
-Author: Santan Kumar <santan.kumar@nxp.com>
-Date:   Mon Jun 19 15:26:03 2017 +0530
-
-    arm64: dts: ls2081ardb: Update nodes for QSPI, SATA, INA220
-
-    Update ls2081ardb.dts for below nodes:
-     -As per updated board design, different QSPI flash is connected on
-      boards, hence change QSPI flash node from n25q512a to s25fs512ss
-in
-      device tree.
-     -Enable dual flash support in QSPI node.
-     -Add DTS node for INA220.
-     -Enable SATA node.
-
-    Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
-    Signed-off-by: Tao Yang <b31903@freescale.com>
-    Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
-
-commit 43d506fa19e1e50e4c2e4f9689ad3c60d9a06d71
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Thu May 11 08:42:19 2017 +0800
-
-    arm64: dts: ls208x: add property for PCA954x Mux device
-
-    PCA954x Mux device should never be turned-off after power-on. if
-    device tree contians "i2c-mux-never-disable" property for pca954x
-    device node, it can ensure that skip disabling PCA954x Mux device.
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit 6d3a96446a7ffccb0b9936b616d855c8d5572bce
-Author: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-Date:   Wed May 3 14:26:35 2017 +0000
-
-    arm64: dts: fsl/ls1088,ls208x: Add mdio and phy nodes
-
-    Add mdio and phy nodes for the following FSL platforms:
-    - LS1088A RDB
-    - LS2080A QDS & RDB
-    - LS2088A QDS, RDB & simu
-
-    Contains contributions from patches by the following authors:
-    Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
-    Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
-    Signed-off-by: Pratiyush Mohan Srivastava
-<pratiyush.srivastava@nxp.com>
-    Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com>
-    Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
-    Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
-    Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
-    Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
-    Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-    Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-
-commit 0443625ea24bc4ea315c30b718712254c588bd18
-Author: Suresh Gupta <suresh.gupta@nxp.com>
-Date:   Fri May 5 13:54:22 2017 +0530
-
-    arm64: dts: ls208xa: Add QSPI Flash node for RDB
-
-    This is temporary patch, will rewrite for open source
-
-    Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
-
-commit ed0ce1d49aa72d12ea54f82d3771a377c68af37e
-Author: Priyanka Jain <priyanka.jain@nxp.com>
-Date:   Thu Apr 13 16:49:40 2017 +0530
-
-    arm64: dts: ls2081ardb: Add DTS support for NXP LS2081ARDB
-
-    This patch add support for NXP LS2081ARDB board which has
-    LS2081A SoC.
-
-    LS2081A SoC is 40-pin derivative of LS2088A SoC
-    So, from functional perspective both are same.
-    Hence,ls2088a SoC dtsi files are included from ls2081ARDB dts
-
-    Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
-
-commit e4fb842554a5e7b8c3f6e3c243222dbe4515aee3
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Thu Apr 27 15:01:54 2017 +0800
-
-    arm64: dts: ls208xa: add ftm0 nodes
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit 64c3e2c3a7ddc89c3c23c012ee364f2c014524d2
-Author: costi <constantin.tudor@freescale.com>
-Date:   Fri Mar 3 18:08:28 2017 +0200
-
-    arm64: dts: fsl-ls2088: Add mdio/phy devices
-
-    Signed-off-by: Constantin Tudor <constantin.tudor@nxp.com>
-
-commit 3bcdc4de0a1c9e6f4a4ddc916e8efe8044d8bbfd
-Author: Po Liu <po.liu@nxp.com>
-Date:   Fri Sep 30 17:11:36 2016 +0800
-
-    arm64: dts: ls1043/ls2080: add pcie aer/pme interrupt-name property
-
-    Some platforms(NXP Layerscape for example) aer/pme interrupts was
-not
-    MSI/MSI-X/INTx but using interrupt line independently. This patch
-    add "aer", "pme" interrupt-names for aer/pme interrupt.
-
-    With the interrupt-names "aer", "pme" code could probe aer/pme
-interrupt
-    line for pcie root port, replace the aer/pme interrupt service irqs.
-
-    This is intend to fixup the Layerscape platforms which aer/pmes
-interrupts
-    was not MSI/MSI-X/INTx, but using interrupt line independently.
-
-    Since the interrupt-names "intr" never been used. Remove it.
-
-    Signed-off-by: Po Liu <po.liu@nxp.com>
-    Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-
-commit 64d859836d3d194e8bc926bb951fd21859689824
-Author: Nipun Gupta <nipun.gupta@nxp.com>
-Date:   Mon Dec 5 05:20:51 2016 +0530
-
-    arm64: dts: ls208xa: Comply with the new iommu binding for fsl_mc
-
-    fsl-mc bus support the new iommu-map property. Comply to this
-binding
-    for fsl_mc bus.
-
-    Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts  |  62 +++++++++
- arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts  |  80 +++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi     |  12 ++
- arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts  | 120 ++++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts  |  80 +++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi |   1 +
- arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi |  11 +-
- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     | 155 +++++++++++++++++++--
- 8 files changed, 505 insertions(+), 16 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
-@@ -23,3 +23,65 @@
- 		stdout-path = "serial0:115200n8";
- 	};
- };
-+
-+&ifc {
-+	boardctrl: board-control@3,0 {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-bus";
-+		reg = <3 0 0x300>;		/* TODO check address */
-+		ranges = <0 3 0 0x300>;
-+
-+		mdio_mux_emi1 {
-+			compatible = "mdio-mux-mmioreg", "mdio-mux";
-+			mdio-parent-bus = <&emdio1>;
-+			reg = <0x54 1>;		/* BRDCFG4 */
-+			mux-mask = <0xe0>;	/* EMI1_MDIO */
-+
-+			#address-cells=<1>;
-+			#size-cells = <0>;
-+
-+			/* Child MDIO buses, one for each riser card:
-+			 * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
-+			 * VSC8234 PHYs on the riser cards.
-+			 */
-+
-+			mdio_mux3: mdio@60 {
-+				reg = <0x60>;
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				mdio0_phy12: mdio_phy0@1c {
-+					reg = <0x1c>;
-+					phy-connection-type = "sgmii";
-+				};
-+				mdio0_phy13: mdio_phy1@1d {
-+					reg = <0x1d>;
-+					phy-connection-type = "sgmii";
-+				};
-+				mdio0_phy14: mdio_phy2@1e {
-+					reg = <0x1e>;
-+					phy-connection-type = "sgmii";
-+				};
-+				mdio0_phy15: mdio_phy3@1f {
-+					reg = <0x1f>;
-+					phy-connection-type = "sgmii";
-+				};
-+			};
-+		};
-+	};
-+};
-+
-+/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
-+&dpmac9 {
-+	phy-handle = <&mdio0_phy12>;
-+};
-+&dpmac10 {
-+	phy-handle = <&mdio0_phy13>;
-+};
-+&dpmac11 {
-+	phy-handle = <&mdio0_phy14>;
-+};
-+&dpmac12 {
-+	phy-handle = <&mdio0_phy15>;
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
-@@ -23,3 +23,83 @@
- 		stdout-path = "serial1:115200n8";
- 	};
- };
-+
-+&emdio1 {
-+	status = "disabled";
-+	/* CS4340 PHYs */
-+	mdio1_phy1: emdio1_phy@1 {
-+		reg = <0x10>;
-+		phy-connection-type = "xfi";
-+	};
-+	mdio1_phy2: emdio1_phy@2 {
-+		reg = <0x11>;
-+		phy-connection-type = "xfi";
-+	};
-+	mdio1_phy3: emdio1_phy@3 {
-+		reg = <0x12>;
-+		phy-connection-type = "xfi";
-+	};
-+	mdio1_phy4: emdio1_phy@4 {
-+		reg = <0x13>;
-+		phy-connection-type = "xfi";
-+	};
-+};
-+
-+&emdio2 {
-+	/* AQR405 PHYs */
-+	mdio2_phy1: emdio2_phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		interrupts = <0 1 0x4>; /* Level high type */
-+		reg = <0x0>;
-+		phy-connection-type = "xfi";
-+	};
-+	mdio2_phy2: emdio2_phy@2 {
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		interrupts = <0 2 0x4>; /* Level high type */
-+		reg = <0x1>;
-+		phy-connection-type = "xfi";
-+	};
-+	mdio2_phy3: emdio2_phy@3 {
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		interrupts = <0 4 0x4>; /* Level high type */
-+		reg = <0x2>;
-+		phy-connection-type = "xfi";
-+	};
-+	mdio2_phy4: emdio2_phy@4 {
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		interrupts = <0 5 0x4>; /* Level high type */
-+		reg = <0x3>;
-+		phy-connection-type = "xfi";
-+	};
-+};
-+
-+/* Update DPMAC connections to external PHYs, under the assumption of
-+ * SerDes 0x2a_0x41. This is currently the only SerDes supported on the board.
-+ */
-+/* Leave Cortina nodes commented out until driver is integrated
-+ *&dpmac1 {
-+ *	phy-handle = <&mdio1_phy1>;
-+ *};
-+ *&dpmac2 {
-+ *	phy-handle = <&mdio1_phy2>;
-+ *};
-+ *&dpmac3 {
-+ *	phy-handle = <&mdio1_phy3>;
-+ *};
-+ *&dpmac4 {
-+ *	phy-handle = <&mdio1_phy4>;
-+ *};
-+ */
-+
-+&dpmac5 {
-+	phy-handle = <&mdio2_phy1>;
-+};
-+&dpmac6 {
-+	phy-handle = <&mdio2_phy2>;
-+};
-+&dpmac7 {
-+	phy-handle = <&mdio2_phy3>;
-+};
-+&dpmac8 {
-+	phy-handle = <&mdio2_phy4>;
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
-@@ -118,6 +118,18 @@
- 	};
- };
- 
-+&timer {
-+	fsl,erratum-a008585;
-+};
-+
-+&usb0 {
-+	snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+};
-+
-+&usb1 {
-+	snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+};
-+
- &pcie1 {
- 	reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
- 	       0x10 0x00000000 0x0 0x00002000>; /* configuration space */
---- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
-@@ -22,3 +22,123 @@
- 		stdout-path = "serial0:115200n8";
- 	};
- };
-+
-+&ifc {
-+	boardctrl: board-control@3,0 {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-bus";
-+		reg = <3 0 0x300>;		/* TODO check address */
-+		ranges = <0 3 0 0x300>;
-+
-+		mdio_mux_emi1 {
-+			compatible = "mdio-mux-mmioreg", "mdio-mux";
-+			mdio-parent-bus = <&emdio1>;
-+			reg = <0x54 1>;		/* BRDCFG4 */
-+			mux-mask = <0xe0>;	/* EMI1_MDIO */
-+
-+			#address-cells=<1>;
-+			#size-cells = <0>;
-+
-+			/* Child MDIO buses, one for each riser card:
-+			 * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
-+			 * VSC8234 PHYs on the riser cards.
-+			 */
-+
-+			mdio_mux3: mdio@60 {
-+				reg = <0x60>;
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				mdio0_phy12: mdio_phy0@1c {
-+					reg = <0x1c>;
-+					phy-connection-type = "sgmii";
-+				};
-+				mdio0_phy13: mdio_phy1@1d {
-+					reg = <0x1d>;
-+					phy-connection-type = "sgmii";
-+				};
-+				mdio0_phy14: mdio_phy2@1e {
-+					reg = <0x1e>;
-+					phy-connection-type = "sgmii";
-+				};
-+				mdio0_phy15: mdio_phy3@1f {
-+					reg = <0x1f>;
-+					phy-connection-type = "sgmii";
-+				};
-+			};
-+		};
-+	};
-+};
-+
-+&pcs_mdio1 {
-+		pcs_phy1: ethernet-phy@0 {
-+		backplane-mode = "10gbase-kr";
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		reg = <0x0>;
-+		fsl,lane-handle = <&serdes1>;
-+		fsl,lane-reg = <0x9C0 0x40>;/* lane H */
-+	};
-+};
-+
-+&pcs_mdio2 {
-+		pcs_phy2: ethernet-phy@0 {
-+		backplane-mode = "10gbase-kr";
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		reg = <0x0>;
-+		fsl,lane-handle = <&serdes1>;
-+		fsl,lane-reg = <0x980 0x40>;/* lane G */
-+	};
-+};
-+
-+&pcs_mdio3 {
-+		pcs_phy3: ethernet-phy@0 {
-+		backplane-mode = "10gbase-kr";
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		reg = <0x0>;
-+		fsl,lane-handle = <&serdes1>;
-+		fsl,lane-reg = <0x940 0x40>;/* lane F */
-+	};
-+};
-+
-+&pcs_mdio4 {
-+		pcs_phy4: ethernet-phy@0 {
-+		backplane-mode = "10gbase-kr";
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		reg = <0x0>;
-+		fsl,lane-handle = <&serdes1>;
-+		fsl,lane-reg = <0x900 0x40>;/* lane E */
-+	};
-+};
-+
-+/* Update DPMAC connections to backplane PHYs, under SerDes 0x2a_0xXX.
-+ * &dpmac1 {
-+ *	phy-handle = <&pcs_phy1>;
-+ * };
-+ *
-+ * &dpmac2 {
-+ *	phy-handle = <&pcs_phy2>;
-+ * };
-+ *
-+ * &dpmac3 {
-+ *	phy-handle = <&pcs_phy3>;
-+ * };
-+ *
-+ * &dpmac4 {
-+ *	phy-handle = <&pcs_phy4>;
-+ * };
-+ */
-+
-+/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
-+&dpmac9 {
-+	phy-handle = <&mdio0_phy12>;
-+};
-+&dpmac10 {
-+	phy-handle = <&mdio0_phy13>;
-+};
-+&dpmac11 {
-+	phy-handle = <&mdio0_phy14>;
-+};
-+&dpmac12 {
-+	phy-handle = <&mdio0_phy15>;
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
-@@ -22,3 +22,83 @@
- 		stdout-path = "serial1:115200n8";
- 	};
- };
-+
-+&emdio1 {
-+	status = "disabled";
-+	/* CS4340 PHYs */
-+	mdio1_phy1: emdio1_phy@1 {
-+		reg = <0x10>;
-+		phy-connection-type = "xfi";
-+	};
-+	mdio1_phy2: emdio1_phy@2 {
-+		reg = <0x11>;
-+		phy-connection-type = "xfi";
-+	};
-+	mdio1_phy3: emdio1_phy@3 {
-+		reg = <0x12>;
-+		phy-connection-type = "xfi";
-+	};
-+	mdio1_phy4: emdio1_phy@4 {
-+		reg = <0x13>;
-+		phy-connection-type = "xfi";
-+	};
-+};
-+
-+&emdio2 {
-+	/* AQR405 PHYs */
-+	mdio2_phy1: emdio2_phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		interrupts = <0 1 0x4>; /* Level high type */
-+		reg = <0x0>;
-+		phy-connection-type = "xfi";
-+	};
-+	mdio2_phy2: emdio2_phy@2 {
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		interrupts = <0 2 0x4>; /* Level high type */
-+		reg = <0x1>;
-+		phy-connection-type = "xfi";
-+	};
-+	mdio2_phy3: emdio2_phy@3 {
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		interrupts = <0 4 0x4>; /* Level high type */
-+		reg = <0x2>;
-+		phy-connection-type = "xfi";
-+	};
-+	mdio2_phy4: emdio2_phy@4 {
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		interrupts = <0 5 0x4>; /* Level high type */
-+		reg = <0x3>;
-+		phy-connection-type = "xfi";
-+	};
-+};
-+
-+/* Update DPMAC connections to external PHYs, under the assumption of
-+ * SerDes 0x2a_0x41. This is currently the only SerDes supported on the board.
-+ */
-+/* Leave Cortina PHYs commented out until proper driver is integrated
-+ *&dpmac1 {
-+ *	phy-handle = <&mdio1_phy1>;
-+ *};
-+ *&dpmac2 {
-+ *	phy-handle = <&mdio1_phy2>;
-+ *};
-+ *&dpmac3 {
-+ *	phy-handle = <&mdio1_phy3>;
-+ *};
-+ *&dpmac4 {
-+ *	phy-handle = <&mdio1_phy4>;
-+ *};
-+ */
-+
-+&dpmac5 {
-+	phy-handle = <&mdio2_phy1>;
-+};
-+&dpmac6 {
-+	phy-handle = <&mdio2_phy2>;
-+};
-+&dpmac7 {
-+	phy-handle = <&mdio2_phy3>;
-+};
-+&dpmac8 {
-+	phy-handle = <&mdio2_phy4>;
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
-@@ -129,6 +129,7 @@
- 
- &qspi {
- 	status = "okay";
-+	fsl,qspi-has-second-chip;
- 	flash0: s25fl256s1@0 {
- 		#address-cells = <1>;
- 		#size-cells = <1>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
-@@ -49,6 +49,7 @@
- 		reg = <0x75>;
- 		#address-cells = <1>;
- 		#size-cells = <0>;
-+		i2c-mux-never-disable;
- 		i2c@1 {
- 			#address-cells = <1>;
- 			#size-cells = <0>;
-@@ -108,7 +109,15 @@
- };
- 
- &qspi {
--	status = "disabled";
-+	status = "okay";
-+	flash0: s25fs512s@0 {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		compatible = "spansion,m25p80";
-+		m25p,fast-read;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+	};
- };
- 
- &sata0 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-@@ -114,13 +114,12 @@
- 		};
- 	};
- 
--	timer {
-+	timer: timer {
- 		compatible = "arm,armv8-timer";
- 		interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
- 			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
- 			     <1 11 4>, /* Virtual PPI, active-low */
- 			     <1 10 4>; /* Hypervisor PPI, active-low */
--		fsl,erratum-a008585;
- 	};
- 
- 	pmu {
-@@ -559,15 +558,126 @@
- 			#interrupt-cells = <2>;
- 		};
- 
-+		/* TODO: WRIOP (CCSR?) */
-+		emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000,
-+					  * E-MDIO1: 0x1_6000
-+					  */
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8B96000 0x0 0x1000>;
-+			device_type = "mdio";	/* TODO: is this necessary? */
-+			little-endian;	/* force the driver in LE mode */
-+
-+			/* Not necessary on the QDS, but needed on the RDB */
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000,
-+					  * E-MDIO2: 0x1_7000
-+					  */
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8B97000 0x0 0x1000>;
-+			device_type = "mdio";	/* TODO: is this necessary? */
-+			little-endian;	/* force the driver in LE mode */
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio1: mdio@0x8c07000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c07000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio2: mdio@0x8c0b000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c0b000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio3: mdio@0x8c0f000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c0f000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio4: mdio@0x8c13000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c13000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio5: mdio@0x8c17000 {
-+			status = "disabled";
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c17000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio6: mdio@0x8c1b000 {
-+			status = "disabled";
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c1b000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio7: mdio@0x8c1f000 {
-+			status = "disabled";
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c1f000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio8: mdio@0x8c23000 {
-+			status = "disabled";
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c23000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
- 		i2c0: i2c@2000000 {
- 			status = "disabled";
--			compatible = "fsl,vf610-i2c";
-+			compatible = "fsl,vf610-i2c", "fsl,ls208xa-vf610-i2c";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <0x0 0x2000000 0x0 0x10000>;
- 			interrupts = <0 34 0x4>; /* Level high type */
- 			clock-names = "i2c";
--			clocks = <&clockgen 4 3>;
-+			clocks = <&clockgen 4 1>;
-+			scl-gpios = <&gpio3 10 0>;
- 		};
- 
- 		i2c1: i2c@2010000 {
-@@ -578,7 +688,7 @@
- 			reg = <0x0 0x2010000 0x0 0x10000>;
- 			interrupts = <0 34 0x4>; /* Level high type */
- 			clock-names = "i2c";
--			clocks = <&clockgen 4 3>;
-+			clocks = <&clockgen 4 1>;
- 		};
- 
- 		i2c2: i2c@2020000 {
-@@ -589,7 +699,7 @@
- 			reg = <0x0 0x2020000 0x0 0x10000>;
- 			interrupts = <0 35 0x4>; /* Level high type */
- 			clock-names = "i2c";
--			clocks = <&clockgen 4 3>;
-+			clocks = <&clockgen 4 1>;
- 		};
- 
- 		i2c3: i2c@2030000 {
-@@ -600,7 +710,7 @@
- 			reg = <0x0 0x2030000 0x0 0x10000>;
- 			interrupts = <0 35 0x4>; /* Level high type */
- 			clock-names = "i2c";
--			clocks = <&clockgen 4 3>;
-+			clocks = <&clockgen 4 1>;
- 		};
- 
- 		ifc: ifc@2240000 {
-@@ -632,8 +742,8 @@
- 		pcie1: pcie@3400000 {
- 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
- 			reg-names = "regs", "config";
--			interrupts = <0 108 0x4>; /* Level high type */
--			interrupt-names = "intr";
-+			interrupts = <0 108 0x4>; /* aer interrupt */
-+			interrupt-names = "aer";
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 			device_type = "pci";
-@@ -641,6 +751,7 @@
- 			num-viewport = <6>;
- 			bus-range = <0x0 0xff>;
- 			msi-parent = <&its>;
-+			iommu-map = <0 &smmu 0 1>;	/* This is fixed-up by u-boot */
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 7>;
- 			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
-@@ -653,8 +764,8 @@
- 		pcie2: pcie@3500000 {
- 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
- 			reg-names = "regs", "config";
--			interrupts = <0 113 0x4>; /* Level high type */
--			interrupt-names = "intr";
-+			interrupts = <0 113 0x4>; /* aer interrupt */
-+			interrupt-names = "aer";
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 			device_type = "pci";
-@@ -662,6 +773,7 @@
- 			num-viewport = <6>;
- 			bus-range = <0x0 0xff>;
- 			msi-parent = <&its>;
-+			iommu-map = <0 &smmu 0 1>;	/* This is fixed-up by u-boot */
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 7>;
- 			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
-@@ -674,8 +786,8 @@
- 		pcie3: pcie@3600000 {
- 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
- 			reg-names = "regs", "config";
--			interrupts = <0 118 0x4>; /* Level high type */
--			interrupt-names = "intr";
-+			interrupts = <0 118 0x4>; /* aer interrupt */
-+			interrupt-names = "aer";
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 			device_type = "pci";
-@@ -683,6 +795,7 @@
- 			num-viewport = <256>;
- 			bus-range = <0x0 0xff>;
- 			msi-parent = <&its>;
-+			iommu-map = <0 &smmu 0 1>;	/* This is fixed-up by u-boot */
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 7>;
- 			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
-@@ -695,8 +808,8 @@
- 		pcie4: pcie@3700000 {
- 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
- 			reg-names = "regs", "config";
--			interrupts = <0 123 0x4>; /* Level high type */
--			interrupt-names = "intr";
-+			interrupts = <0 123 0x4>; /* aer interrupt */
-+			interrupt-names = "aer";
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 			device_type = "pci";
-@@ -704,6 +817,7 @@
- 			num-viewport = <6>;
- 			bus-range = <0x0 0xff>;
- 			msi-parent = <&its>;
-+			iommu-map = <0 &smmu 0 1>;	/* This is fixed-up by u-boot */
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 7>;
- 			interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
-@@ -753,11 +867,22 @@
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 		};
- 
-+		serdes1: serdes@1ea0000 {
-+				reg = <0x0 0x1ea0000 0 0x00002000>;
-+				compatible = "fsl,serdes-10g";
-+		};
-+
- 		ccn@4000000 {
- 			compatible = "arm,ccn-504";
- 			reg = <0x0 0x04000000 0x0 0x01000000>;
- 			interrupts = <0 12 4>;
- 		};
-+
-+		ftm0: ftm0@2800000 {
-+			compatible = "fsl,ftm-alarm";
-+			reg = <0x0 0x2800000 0x0 0x10000>;
-+			interrupts = <0 44 4>;
-+		};
- 	};
- 
- 	ddr1: memory-controller@1080000 {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0011-ARM-dts-accumulated-change.patch b/target/linux/layerscape/patches-5.4/302-dts-0011-ARM-dts-accumulated-change.patch
deleted file mode 100644
index 6f3181d65a..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0011-ARM-dts-accumulated-change.patch
+++ /dev/null
@@ -1,156 +0,0 @@
-From a9f1c1d3e410596d0a39fd92562cc48ef960b1b7 Mon Sep 17 00:00:00 2001
-From: Li Yang <leoyang.li@nxp.com>
-Date: Fri, 5 Oct 2018 18:33:49 -0500
-Subject: [PATCH] ARM: dts: accumulated change
-
-Signed-off-by: Li Yang <leoyang.li@nxp.com>
----
- arch/arm/boot/dts/ls1021a-qds.dts | 15 +++++++++++++++
- arch/arm/boot/dts/ls1021a-twr.dts | 15 +++++++++++++++
- arch/arm/boot/dts/ls1021a.dtsi    | 29 ++++++++++++++++++++++++-----
- 3 files changed, 54 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/ls1021a-qds.dts
-+++ b/arch/arm/boot/dts/ls1021a-qds.dts
-@@ -126,6 +126,21 @@
- 	};
- };
- 
-+&qspi {
-+	num-cs = <2>;
-+	status = "okay";
-+
-+	qflash0: s25fl128s@0 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+		spi-rx-bus-width = <4>;
-+		spi-tx-bus-width = <4>;
-+	};
-+};
-+
- &enet0 {
- 	tbi-handle = <&tbi0>;
- 	phy-handle = <&sgmii_phy1c>;
---- a/arch/arm/boot/dts/ls1021a-twr.dts
-+++ b/arch/arm/boot/dts/ls1021a-twr.dts
-@@ -144,6 +144,21 @@
- 	};
- };
- 
-+&qspi {
-+	num-cs = <2>;
-+	status = "okay";
-+
-+	qflash0: n25q128a13@0 {
-+		compatible = "n25q128a13", "jedec,spi-nor";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+		spi-rx-bus-width = <4>;
-+		spi-tx-bus-width = <4>;
-+	};
-+};
-+
- &enet0 {
- 	tbi-handle = <&tbi0>;
- 	phy-handle = <&sgmii_phy2>;
---- a/arch/arm/boot/dts/ls1021a.dtsi
-+++ b/arch/arm/boot/dts/ls1021a.dtsi
-@@ -167,12 +167,13 @@
- 		ifc: ifc@1530000 {
- 			compatible = "fsl,ifc", "simple-bus";
- 			reg = <0x0 0x1530000 0x0 0x10000>;
-+			big-endian;
- 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- 		};
- 
- 		dcfg: dcfg@1ee0000 {
- 			compatible = "fsl,ls1021a-dcfg", "syscon";
--			reg = <0x0 0x1ee0000 0x0 0x10000>;
-+			reg = <0x0 0x1ee0000 0x0 0x1000>;
- 			big-endian;
- 		};
- 
-@@ -338,7 +339,7 @@
- 		};
- 
- 		i2c0: i2c@2180000 {
--			compatible = "fsl,vf610-i2c";
-+			compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <0x0 0x2180000 0x0 0x10000>;
-@@ -347,11 +348,12 @@
- 			clocks = <&clockgen 4 1>;
- 			dma-names = "tx", "rx";
- 			dmas = <&edma0 1 39>, <&edma0 1 38>;
-+			fsl-scl-gpio = <&gpio3 23 0>;
- 			status = "disabled";
- 		};
- 
- 		i2c1: i2c@2190000 {
--			compatible = "fsl,vf610-i2c";
-+			compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <0x0 0x2190000 0x0 0x10000>;
-@@ -360,6 +362,7 @@
- 			clocks = <&clockgen 4 1>;
- 			dma-names = "tx", "rx";
- 			dmas = <&edma0 1 37>, <&edma0 1 36>;
-+			fsl-scl-gpio = <&gpio3 23 0>;
- 			status = "disabled";
- 		};
- 
-@@ -546,6 +549,16 @@
- 			status = "disabled";
- 		};
- 
-+		ftm0: ftm0@29d0000 {
-+			compatible = "fsl,ftm-alarm";
-+			reg = <0x0 0x29d0000 0x0 0x10000>,
-+			      <0x0 0x1ee2140 0x0 0x4>;
-+			reg-names = "ftm", "FlexTimer1";
-+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-+			big-endian;
-+			status = "okay";
-+		};
-+
- 		pwm1: pwm@29e0000 {
- 			compatible = "fsl,vf610-ftm-pwm";
- 			#pwm-cells = <3>;
-@@ -828,6 +841,8 @@
- 			dr_mode = "host";
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
-+			usb3-lpm-capable;
-+			snps,dis-u1u2-when-u3-quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 		};
- 
-@@ -836,7 +851,9 @@
- 			reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
- 			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
- 			reg-names = "regs", "config";
--			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
-+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-+					   <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
-+			interrupt-names = "pme", "aer";
- 			fsl,pcie-scfg = <&scfg 0>;
- 			#address-cells = <3>;
- 			#size-cells = <2>;
-@@ -860,7 +877,9 @@
- 			reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
- 			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
- 			reg-names = "regs", "config";
--			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
-+					   <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
-+			interrupt-names = "pme", "aer";
- 			fsl,pcie-scfg = <&scfg 1>;
- 			#address-cells = <3>;
- 			#size-cells = <2>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0012-arm64-dts-ls1046a-add-smmu-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0012-arm64-dts-ls1046a-add-smmu-node.patch
deleted file mode 100644
index 17f402448b..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0012-arm64-dts-ls1046a-add-smmu-node.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 233d5936fb01dc7b47641e10354f7cc34124c592 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 6 Feb 2018 14:27:41 +0200
-Subject: [PATCH] arm64: dts: ls1046a: add smmu node
-
-This allows for the SMMU device to be probed by the SMMU kernel driver.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 42 ++++++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-@@ -229,6 +229,48 @@
- 			bus-width = <4>;
- 		};
- 
-+		smmu: iommu@9000000 {
-+			compatible = "arm,mmu-500";
-+			reg = <0 0x9000000 0 0x400000>;
-+			dma-coherent;
-+			#global-interrupts = <2>;
-+			#iommu-cells = <1>;
-+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
- 		scfg: scfg@1570000 {
- 			compatible = "fsl,ls1046a-scfg", "syscon";
- 			reg = <0x0 0x1570000 0x0 0x10000>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0013-arm64-dts-ls1043a-add-smmu-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0013-arm64-dts-ls1043a-add-smmu-node.patch
deleted file mode 100644
index 19c0bcb0dd..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0013-arm64-dts-ls1043a-add-smmu-node.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 6b81f85d194bf15cf91ed3b4a8aec2d1ed2849a8 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 3 Apr 2018 17:15:44 +0300
-Subject: [PATCH] arm64: dts: ls1043a: add smmu node
-
-This allows for the SMMU device to be probed by the SMMU kernel driver.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 42 ++++++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -226,6 +226,48 @@
- 			clocks = <&sysclk>;
- 		};
- 
-+		smmu: iommu@9000000 {
-+			compatible = "arm,mmu-500";
-+			reg = <0 0x9000000 0 0x400000>;
-+			dma-coherent;
-+			#global-interrupts = <2>;
-+			#iommu-cells = <1>;
-+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
- 		scfg: scfg@1570000 {
- 			compatible = "fsl,ls1043a-scfg", "syscon";
- 			reg = <0x0 0x1570000 0x0 0x10000>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0014-arm64-dts-ls104xa-set-mask-to-drop-TBU-ID-from-Strea.patch b/target/linux/layerscape/patches-5.4/302-dts-0014-arm64-dts-ls104xa-set-mask-to-drop-TBU-ID-from-Strea.patch
deleted file mode 100644
index 212063986b..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0014-arm64-dts-ls104xa-set-mask-to-drop-TBU-ID-from-Strea.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 66307f9e693bd4822a683fac8cf1f63533822c18 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Thu, 3 May 2018 18:05:43 +0300
-Subject: [PATCH] arm64: dts: ls104xa: set mask to drop TBU ID from StreamID
-
-The StreamID entering the SMMU is actually a concatenation of the
-SMMU TBU ID and the ICID configured in software.
-Since the TBU ID is internal to the SoC and since we want that the
-actual the ICID configured in software to enter the SMMU witout any
-additional set bits, mask out the TBU ID bits and leave only the
-relevant ICID bits to enter SMMU.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 +
- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -230,6 +230,7 @@
- 			compatible = "arm,mmu-500";
- 			reg = <0 0x9000000 0 0x400000>;
- 			dma-coherent;
-+			stream-match-mask = <0x7f00>;
- 			#global-interrupts = <2>;
- 			#iommu-cells = <1>;
- 			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-@@ -233,6 +233,7 @@
- 			compatible = "arm,mmu-500";
- 			reg = <0 0x9000000 0 0x400000>;
- 			dma-coherent;
-+			stream-match-mask = <0x7f00>;
- 			#global-interrupts = <2>;
- 			#iommu-cells = <1>;
- 			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0015-arm64-dts-ls104x-add-missing-dma-ranges-property.patch b/target/linux/layerscape/patches-5.4/302-dts-0015-arm64-dts-ls104x-add-missing-dma-ranges-property.patch
deleted file mode 100644
index ebcbf36e75..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0015-arm64-dts-ls104x-add-missing-dma-ranges-property.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From f656c67b9522f18e38394fe5b6e00302c0c8ceb8 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Thu, 17 May 2018 11:40:07 +0300
-Subject: [PATCH] arm64: dts: ls104x: add missing dma ranges property
-
-These chips have a 48-bit address size so make sure that the dma-ranges
-reflects this. Otherwise the linux kernel's dma sub-system will set
-the default dma masks to full 64-bit, badly breaking dmas.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 +
- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -218,6 +218,7 @@
- 		#address-cells = <2>;
- 		#size-cells = <2>;
- 		ranges;
-+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
- 
- 		clockgen: clocking@1ee1000 {
- 			compatible = "fsl,ls1043a-clockgen";
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-@@ -190,6 +190,7 @@
- 		#address-cells = <2>;
- 		#size-cells = <2>;
- 		ranges;
-+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
- 
- 		ddr: memory-controller@1080000 {
- 			compatible = "fsl,qoriq-memory-controller";
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0016-arm64-dts-ls104x-add-iommu-map-to-pci-controllers.patch b/target/linux/layerscape/patches-5.4/302-dts-0016-arm64-dts-ls104x-add-iommu-map-to-pci-controllers.patch
deleted file mode 100644
index 4ca5a87884..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0016-arm64-dts-ls104x-add-iommu-map-to-pci-controllers.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 317d4e577ede33f226d24bd12a8edbaafee22e57 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Thu, 17 May 2018 11:56:27 +0300
-Subject: [PATCH] arm64: dts: ls104x: add iommu-map to pci controllers
-
-The pci controllers are also behind the smmu so add the iommu-map
-property to reflect this. The bootloader needs to patch the stream id
-ranges to some sane values.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++
- 2 files changed, 6 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -808,6 +808,7 @@
- 			#size-cells = <2>;
- 			device_type = "pci";
- 			dma-coherent;
-+			iommu-map = <0 &smmu 0 1>;	/* update by bootloader */
- 			num-viewport = <6>;
- 			bus-range = <0x0 0xff>;
- 			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
-@@ -834,6 +835,7 @@
- 			#size-cells = <2>;
- 			device_type = "pci";
- 			dma-coherent;
-+			iommu-map = <0 &smmu 0 1>;	/* update by bootloader */
- 			num-viewport = <6>;
- 			bus-range = <0x0 0xff>;
- 			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
-@@ -860,6 +862,7 @@
- 			#size-cells = <2>;
- 			device_type = "pci";
- 			dma-coherent;
-+			iommu-map = <0 &smmu 0 1>;	/* update by bootloader */
- 			num-viewport = <6>;
- 			bus-range = <0x0 0xff>;
- 			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-@@ -716,6 +716,7 @@
- 			#size-cells = <2>;
- 			device_type = "pci";
- 			dma-coherent;
-+			iommu-map = <0 &smmu 0 1>;	/* update by bootloader */
- 			num-viewport = <8>;
- 			bus-range = <0x0 0xff>;
- 			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
-@@ -752,6 +753,7 @@
- 			#size-cells = <2>;
- 			device_type = "pci";
- 			dma-coherent;
-+			iommu-map = <0 &smmu 0 1>;	/* update by bootloader */
- 			num-viewport = <8>;
- 			bus-range = <0x0 0xff>;
- 			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
-@@ -788,6 +790,7 @@
- 			#size-cells = <2>;
- 			device_type = "pci";
- 			dma-coherent;
-+			iommu-map = <0 &smmu 0 1>;	/* update by bootloader */
- 			num-viewport = <8>;
- 			bus-range = <0x0 0xff>;
- 			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0017-arm64-dts-ls104x-make-dma-coherent-global-to-the-SoC.patch b/target/linux/layerscape/patches-5.4/302-dts-0017-arm64-dts-ls104x-make-dma-coherent-global-to-the-SoC.patch
deleted file mode 100644
index 6430e6cf33..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0017-arm64-dts-ls104x-make-dma-coherent-global-to-the-SoC.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From b1e679aba75e5e137c70bc76169c34835ef0e474 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 24 Jul 2018 13:11:03 +0300
-Subject: [PATCH] arm64: dts: ls104x: make dma-coherent global to the SoC
-
-These SoCs are really completely dma coherent in their entirety so add
-the dma-coherent property at the soc level in the device tree and drop
-the instances where it's specifically added to a few select devices.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 5 +----
- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 +
- 2 files changed, 2 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -219,6 +219,7 @@
- 		#size-cells = <2>;
- 		ranges;
- 		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
-+		dma-coherent;
- 
- 		clockgen: clocking@1ee1000 {
- 			compatible = "fsl,ls1043a-clockgen";
-@@ -772,7 +773,6 @@
- 			reg-names = "ahci", "sata-ecc";
- 			interrupts = <0 69 0x4>;
- 			clocks = <&clockgen 4 0>;
--			dma-coherent;
- 		};
- 
- 		msi1: msi-controller1@1571000 {
-@@ -807,7 +807,6 @@
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 			device_type = "pci";
--			dma-coherent;
- 			iommu-map = <0 &smmu 0 1>;	/* update by bootloader */
- 			num-viewport = <6>;
- 			bus-range = <0x0 0xff>;
-@@ -834,7 +833,6 @@
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 			device_type = "pci";
--			dma-coherent;
- 			iommu-map = <0 &smmu 0 1>;	/* update by bootloader */
- 			num-viewport = <6>;
- 			bus-range = <0x0 0xff>;
-@@ -861,7 +859,6 @@
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 			device_type = "pci";
--			dma-coherent;
- 			iommu-map = <0 &smmu 0 1>;	/* update by bootloader */
- 			num-viewport = <6>;
- 			bus-range = <0x0 0xff>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-@@ -191,6 +191,7 @@
- 		#size-cells = <2>;
- 		ranges;
- 		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
-+		dma-coherent;
- 
- 		ddr: memory-controller@1080000 {
- 			compatible = "fsl,qoriq-memory-controller";
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0018-arm64-dts-ls104x-use-a-pseudo-bus-to-constrain-usb-d.patch b/target/linux/layerscape/patches-5.4/302-dts-0018-arm64-dts-ls104x-use-a-pseudo-bus-to-constrain-usb-d.patch
deleted file mode 100644
index 81faace4c2..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0018-arm64-dts-ls104x-use-a-pseudo-bus-to-constrain-usb-d.patch
+++ /dev/null
@@ -1,193 +0,0 @@
-From a6a86473350c7dcbae61afa1e926941d76ca17ed Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Thu, 20 Sep 2018 13:46:54 +0300
-Subject: [PATCH] arm64: dts: ls104x: use a pseudo-bus to constrain usb dma
- size
-
-Wrap the usb controllers in an intermediate simple-bus and use it to
-constrain the dma address size of these usb controllers to the 40 bits
-that they generate toward the interconnect.
-This is required because the SoC uses 48 bits address sizes and this
-mismatch would lead to smmu context faults because the usb generates
-40-bit addresses while the smmu page tables are populated with 48-bit
-wide addresses.
-
-Suggested-by: Robin Murphy <robin.murphy@arm.com>
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 82 ++++++++++++++------------
- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 76 +++++++++++++-----------
- 2 files changed, 87 insertions(+), 71 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -727,43 +727,51 @@
- 				 <&clockgen 4 0>;
- 		};
- 
--		usb0: usb3@2f00000 {
--			compatible = "snps,dwc3";
--			reg = <0x0 0x2f00000 0x0 0x10000>;
--			interrupts = <0 60 0x4>;
--			dr_mode = "host";
--			snps,quirk-frame-length-adjustment = <0x20>;
--			snps,dis_rxdet_inp3_quirk;
--			usb3-lpm-capable;
--			snps,dis-u1u2-when-u3-quirk;
--			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
--			configure-gfladj;
--		};
-+		usb_aux_bus: usb_aux_bus {
-+			#address-cells = <2>;
-+			#size-cells = <2>;
-+			compatible = "simple-bus";
-+			ranges;
-+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
- 
--		usb1: usb3@3000000 {
--			compatible = "snps,dwc3";
--			reg = <0x0 0x3000000 0x0 0x10000>;
--			interrupts = <0 61 0x4>;
--			dr_mode = "host";
--			snps,quirk-frame-length-adjustment = <0x20>;
--			snps,dis_rxdet_inp3_quirk;
--			usb3-lpm-capable;
--			snps,dis-u1u2-when-u3-quirk;
--			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
--			configure-gfladj;
--		};
-+			usb0: usb3@2f00000 {
-+				compatible = "snps,dwc3";
-+				reg = <0x0 0x2f00000 0x0 0x10000>;
-+				interrupts = <0 60 0x4>;
-+				dr_mode = "host";
-+				snps,quirk-frame-length-adjustment = <0x20>;
-+				snps,dis_rxdet_inp3_quirk;
-+				usb3-lpm-capable;
-+				snps,dis-u1u2-when-u3-quirk;
-+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+				configure-gfladj;
-+			};
-+
-+			usb1: usb3@3000000 {
-+				compatible = "snps,dwc3";
-+				reg = <0x0 0x3000000 0x0 0x10000>;
-+				interrupts = <0 61 0x4>;
-+				dr_mode = "host";
-+				snps,quirk-frame-length-adjustment = <0x20>;
-+				snps,dis_rxdet_inp3_quirk;
-+				usb3-lpm-capable;
-+				snps,dis-u1u2-when-u3-quirk;
-+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+				configure-gfladj;
-+			};
- 
--		usb2: usb3@3100000 {
--			compatible = "snps,dwc3";
--			reg = <0x0 0x3100000 0x0 0x10000>;
--			interrupts = <0 63 0x4>;
--			dr_mode = "host";
--			snps,quirk-frame-length-adjustment = <0x20>;
--			snps,dis_rxdet_inp3_quirk;
--			usb3-lpm-capable;
--			snps,dis-u1u2-when-u3-quirk;
--			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
--			configure-gfladj;
-+			usb2: usb3@3100000 {
-+				compatible = "snps,dwc3";
-+				reg = <0x0 0x3100000 0x0 0x10000>;
-+				interrupts = <0 63 0x4>;
-+				dr_mode = "host";
-+				snps,quirk-frame-length-adjustment = <0x20>;
-+				snps,dis_rxdet_inp3_quirk;
-+				usb3-lpm-capable;
-+				snps,dis-u1u2-when-u3-quirk;
-+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+				configure-gfladj;
-+			};
- 		};
- 
- 		sata: sata@3200000 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-@@ -625,40 +625,48 @@
- 				 <&clockgen 4 1>;
- 		};
- 
--		usb0: usb@2f00000 {
--			compatible = "snps,dwc3";
--			reg = <0x0 0x2f00000 0x0 0x10000>;
--			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
--			dr_mode = "host";
--			snps,quirk-frame-length-adjustment = <0x20>;
--			snps,dis_rxdet_inp3_quirk;
--			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
--			usb3-lpm-capable;
--			snps,dis-u1u2-when-u3-quirk;
--		};
-+		usb_aux_bus: usb_aux_bus {
-+			#address-cells = <2>;
-+			#size-cells = <2>;
-+			compatible = "simple-bus";
-+			ranges;
-+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
- 
--		usb1: usb@3000000 {
--			compatible = "snps,dwc3";
--			reg = <0x0 0x3000000 0x0 0x10000>;
--			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
--			dr_mode = "host";
--			snps,quirk-frame-length-adjustment = <0x20>;
--			snps,dis_rxdet_inp3_quirk;
--			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
--			usb3-lpm-capable;
--			snps,dis-u1u2-when-u3-quirk;
--		};
-+			usb0: usb@2f00000 {
-+				compatible = "snps,dwc3";
-+				reg = <0x0 0x2f00000 0x0 0x10000>;
-+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-+				dr_mode = "host";
-+				snps,quirk-frame-length-adjustment = <0x20>;
-+				snps,dis_rxdet_inp3_quirk;
-+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+				usb3-lpm-capable;
-+				snps,dis-u1u2-when-u3-quirk;
-+			};
-+
-+			usb1: usb@3000000 {
-+				compatible = "snps,dwc3";
-+				reg = <0x0 0x3000000 0x0 0x10000>;
-+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-+				dr_mode = "host";
-+				snps,quirk-frame-length-adjustment = <0x20>;
-+				snps,dis_rxdet_inp3_quirk;
-+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+				usb3-lpm-capable;
-+				snps,dis-u1u2-when-u3-quirk;
-+			};
- 
--		usb2: usb@3100000 {
--			compatible = "snps,dwc3";
--			reg = <0x0 0x3100000 0x0 0x10000>;
--			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
--			dr_mode = "host";
--			snps,quirk-frame-length-adjustment = <0x20>;
--			snps,dis_rxdet_inp3_quirk;
--			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
--			usb3-lpm-capable;
--			snps,dis-u1u2-when-u3-quirk;
-+			usb2: usb@3100000 {
-+				compatible = "snps,dwc3";
-+				reg = <0x0 0x3100000 0x0 0x10000>;
-+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-+				dr_mode = "host";
-+				snps,quirk-frame-length-adjustment = <0x20>;
-+				snps,dis_rxdet_inp3_quirk;
-+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+				usb3-lpm-capable;
-+				snps,dis-u1u2-when-u3-quirk;
-+			};
- 		};
- 
- 		sata: sata@3200000 {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0019-sdk-dts-ls104x-drop-smmu-from-the-sdk-device-trees.patch b/target/linux/layerscape/patches-5.4/302-dts-0019-sdk-dts-ls104x-drop-smmu-from-the-sdk-device-trees.patch
deleted file mode 100644
index bdf69a6523..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0019-sdk-dts-ls104x-drop-smmu-from-the-sdk-device-trees.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 9c0090519c422600596a9d7c1e6e33a5268dfce4 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Thu, 2 Aug 2018 17:54:28 +0300
-Subject: [PATCH] sdk: dts: ls104x: drop smmu from the sdk device trees
-
-SMMU is not supported for the SDK version of the dpaa ethernet
-drivers so remove the SMMU node from the device tree.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts | 14 ++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts | 14 ++++++++++++++
- 2 files changed, 28 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts
-@@ -64,6 +64,20 @@
- &soc {
- #include "qoriq-dpaa-eth.dtsi"
- #include "qoriq-fman3-0-6oh.dtsi"
-+
-+pcie@3400000 {
-+	/delete-property/ iommu-map;
-+};
-+
-+pcie@3500000 {
-+	/delete-property/ iommu-map;
-+};
-+
-+pcie@3600000 {
-+	/delete-property/ iommu-map;
-+};
-+
-+/delete-node/ iommu@9000000;
- };
- 
- &fman0 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
-@@ -64,6 +64,20 @@
- &soc {
- #include "qoriq-dpaa-eth.dtsi"
- #include "qoriq-fman3-0-6oh.dtsi"
-+
-+pcie@3400000 {
-+	/delete-property/ iommu-map;
-+};
-+
-+pcie@3500000 {
-+	/delete-property/ iommu-map;
-+};
-+
-+pcie@3600000 {
-+	/delete-property/ iommu-map;
-+};
-+
-+/delete-node/ iommu@9000000;
- };
- 
- &fsldpaa {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0020-arm64-dts-lx2160a-add-MDIO-device-tree-nodes.patch b/target/linux/layerscape/patches-5.4/302-dts-0020-arm64-dts-lx2160a-add-MDIO-device-tree-nodes.patch
deleted file mode 100644
index 0232c40ee3..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0020-arm64-dts-lx2160a-add-MDIO-device-tree-nodes.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 5fb032ca86c078429ecdde3cbd9040702bb86954 Mon Sep 17 00:00:00 2001
-From: Vicentiu Galanopulo <vicentiu.galanopulo@nxp.com>
-Date: Fri, 20 Apr 2018 11:00:09 +0300
-Subject: [PATCH] arm64: dts: lx2160a: add MDIO device-tree nodes
-
-Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 22 ++++++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -478,6 +478,28 @@
- 			little-endian;
- 		};
- 
-+		/* TODO: WRIOP (CCSR?) */
-+		emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000, E-MDIO1: 0x1_6000 */
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8B96000 0x0 0x1000>;
-+			device_type = "mdio";			/* TODO: is this necessary? */
-+			little-endian;	/* force the driver in LE mode */
-+
-+			/* Not necessary on the QDS, but needed on the RDB */
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000, E-MDIO2: 0x1_7000 */
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8B97000 0x0 0x1000>;
-+			device_type = "mdio";			/* TODO: is this necessary? */
-+			little-endian;	/* force the driver in LE mode */
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
- 		i2c0: i2c@2000000 {
- 			compatible = "fsl,vf610-i2c";
- 			#address-cells = <1>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0021-arm64-dts-lx2160a-rdb-Add-RGMII-PHY-nodes-for-dpmac-.patch b/target/linux/layerscape/patches-5.4/302-dts-0021-arm64-dts-lx2160a-rdb-Add-RGMII-PHY-nodes-for-dpmac-.patch
deleted file mode 100644
index 85fa5b83df..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0021-arm64-dts-lx2160a-rdb-Add-RGMII-PHY-nodes-for-dpmac-.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 08726d24b8552e4a986631090e063d38cd2d82cf Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Tue, 10 Jul 2018 13:56:56 +0300
-Subject: [PATCH] arm64: dts: lx2160a-rdb: Add RGMII PHY nodes for dpmac 17 and
- 18
-
-* Both are AR8035 chips
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 25 +++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-@@ -159,3 +159,28 @@
- &usb1 {
- 	status = "okay";
- };
-+
-+&emdio1 {
-+	rgmii_phy1: ethernet-phy@1 {
-+		/* AR8035 PHY - "compatible" property not strictly needed */
-+		compatible = "ethernet-phy-id004d.d072";
-+		reg = <0x1>;
-+		/* Poll mode - no "interrupts" property defined */
-+	};
-+	rgmii_phy2: ethernet-phy@2 {
-+		/* AR8035 PHY - "compatible" property not strictly needed */
-+		compatible = "ethernet-phy-id004d.d072";
-+		reg = <0x2>;
-+		/* Poll mode - no "interrupts" property defined */
-+	};
-+};
-+
-+&dpmac17 {
-+	phy-handle = <&rgmii_phy1>;
-+	phy-connection-type = "rgmii-id";
-+};
-+
-+&dpmac18 {
-+	phy-handle = <&rgmii_phy2>;
-+	phy-connection-type = "rgmii-id";
-+};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0022-arm64-dts-lx2160a-correct-scl-gpios-property.patch b/target/linux/layerscape/patches-5.4/302-dts-0022-arm64-dts-lx2160a-correct-scl-gpios-property.patch
deleted file mode 100644
index 991c5f5750..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0022-arm64-dts-lx2160a-correct-scl-gpios-property.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From a99acc11751ea640c7687155e964612b232bc492 Mon Sep 17 00:00:00 2001
-From: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date: Mon, 29 Oct 2018 10:37:03 +0800
-Subject: [PATCH] arm64: dts: lx2160a: correct scl-gpios property
-
-Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -508,7 +508,7 @@
- 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- 			clock-names = "i2c";
- 			clocks = <&clockgen 4 15>;
--			scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-+			scl-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
- 			status = "disabled";
- 		};
- 
-@@ -553,7 +553,7 @@
- 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- 			clock-names = "i2c";
- 			clocks = <&clockgen 4 15>;
--			scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
-+			scl-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
- 			status = "disabled";
- 		};
- 
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0023-arm64-dts-lx2160a-add-dspi-controller-DT-nodes.patch b/target/linux/layerscape/patches-5.4/302-dts-0023-arm64-dts-lx2160a-add-dspi-controller-DT-nodes.patch
deleted file mode 100644
index 74fe6059dc..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0023-arm64-dts-lx2160a-add-dspi-controller-DT-nodes.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From df8cea437a14a4a412a32058ca49a2b30b48cc71 Mon Sep 17 00:00:00 2001
-From: Chuanhua Han <chuanhua.han@nxp.com>
-Date: Fri, 26 Oct 2018 12:08:55 +0800
-Subject: [PATCH] arm64: dts: lx2160a: add dspi controller DT nodes
-
-Add the dspi support on lx2160
-
-Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
-Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com>
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 39 ++++++++++++++++++++++++++
- 1 file changed, 39 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -603,6 +603,45 @@
- 			status = "disabled";
- 		};
- 
-+		dspi0: spi@2100000 {
-+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <0x0 0x2100000 0x0 0x10000>;
-+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clockgen 4 7>;
-+			clock-names = "dspi";
-+			spi-num-chipselects = <5>;
-+			bus-num = <0>;
-+			status = "disabled";
-+		};
-+
-+		dspi1: spi@2110000 {
-+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <0x0 0x2110000 0x0 0x10000>;
-+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clockgen 4 7>;
-+			clock-names = "dspi";
-+			spi-num-chipselects = <5>;
-+			bus-num = <1>;
-+			status = "disabled";
-+		};
-+
-+		dspi2: spi@2120000 {
-+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <0x0 0x2120000 0x0 0x10000>;
-+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clockgen 4 7>;
-+			clock-names = "dspi";
-+			spi-num-chipselects = <5>;
-+			bus-num = <2>;
-+			status = "disabled";
-+		};
-+
- 		esdhc0: esdhc@2140000 {
- 			compatible = "fsl,esdhc";
- 			reg = <0x0 0x2140000 0x0 0x10000>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0024-arm64-dts-lx2160a-add-DT-node-for-all-DSPI-controlle.patch b/target/linux/layerscape/patches-5.4/302-dts-0024-arm64-dts-lx2160a-add-DT-node-for-all-DSPI-controlle.patch
deleted file mode 100644
index bb931fb871..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0024-arm64-dts-lx2160a-add-DT-node-for-all-DSPI-controlle.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 3f304579d634bcbef18fec939e407c8e789637c8 Mon Sep 17 00:00:00 2001
-From: Chuanhua Han <chuanhua.han@nxp.com>
-Date: Fri, 26 Oct 2018 12:11:25 +0800
-Subject: [PATCH] arm64: dts: lx2160a: add DT node for all DSPI controller
-
-Add device tree node for first flash (CS0) connected
-to all dspi controller.
-
-Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
-Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 36 +++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
-@@ -35,6 +35,42 @@
- 	status = "okay";
- };
- 
-+&dspi0 {
-+	status = "okay";
-+
-+	dflash0: flash@0 {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		compatible = "jedec,spi-nor";
-+		reg = <0>;
-+		spi-max-frequency = <1000000>;
-+	};
-+};
-+
-+&dspi1 {
-+	status = "okay";
-+
-+	dflash1: flash@0 {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		compatible = "jedec,spi-nor";
-+		reg = <0>;
-+		spi-max-frequency = <1000000>;
-+	};
-+};
-+
-+&dspi2 {
-+	status = "okay";
-+
-+	dflash2: flash@0 {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		compatible = "jedec,spi-nor";
-+		reg = <0>;
-+		spi-max-frequency = <1000000>;
-+	};
-+};
-+
- &esdhc0 {
- 	status = "okay";
- };
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0025-arm64-dts-nxp-ls208xa-add-more-thermal-zone-support.patch b/target/linux/layerscape/patches-5.4/302-dts-0025-arm64-dts-nxp-ls208xa-add-more-thermal-zone-support.patch
deleted file mode 100644
index 5434e1f913..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0025-arm64-dts-nxp-ls208xa-add-more-thermal-zone-support.patch
+++ /dev/null
@@ -1,745 +0,0 @@
-From d05cf625f27335320a2ad883b7f7c4cd638dca99 Mon Sep 17 00:00:00 2001
-From: Yuantian Tang <andy.tang@nxp.com>
-Date: Mon, 5 Nov 2018 17:25:32 +0800
-Subject: [PATCH] arm64: dts: nxp: ls208xa: add more thermal zone support
-
-Ls208xa has several thermal sensors. Add all the sensor id to dts
-to enable them.
-
-To make the dts cleaner, re-organize the nodes to split out the
-common part so that it can be shared with other SoCs.
-
-Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi  |   8 +-
- arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi  |   8 +-
- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi  |  70 ++++---
- arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi |  99 ++++++++++
- arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi |  99 ++++++++++
- arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi |  99 ++++++++++
- arch/arm64/boot/dts/freescale/fsl-tmu.dtsi      | 251 ++++++++++++++++++++++++
- 7 files changed, 590 insertions(+), 44 deletions(-)
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu.dtsi
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
-@@ -12,7 +12,7 @@
- #include "fsl-ls208xa.dtsi"
- 
- &cpu {
--	cpu0: cpu@0 {
-+	cooling_map0: cpu0: cpu@0 {
- 		device_type = "cpu";
- 		compatible = "arm,cortex-a57";
- 		reg = <0x0>;
-@@ -32,7 +32,7 @@
- 		#cooling-cells = <2>;
- 	};
- 
--	cpu2: cpu@100 {
-+	cooling_map1: cpu2: cpu@100 {
- 		device_type = "cpu";
- 		compatible = "arm,cortex-a57";
- 		reg = <0x100>;
-@@ -52,7 +52,7 @@
- 		#cooling-cells = <2>;
- 	};
- 
--	cpu4: cpu@200 {
-+	cooling_map2: cpu4: cpu@200 {
- 		device_type = "cpu";
- 		compatible = "arm,cortex-a57";
- 		reg = <0x200>;
-@@ -72,7 +72,7 @@
- 		#cooling-cells = <2>;
- 	};
- 
--	cpu6: cpu@300 {
-+	cooling_map3: cpu6: cpu@300 {
- 		device_type = "cpu";
- 		compatible = "arm,cortex-a57";
- 		reg = <0x300>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
-@@ -12,7 +12,7 @@
- #include "fsl-ls208xa.dtsi"
- 
- &cpu {
--	cpu0: cpu@0 {
-+	cooling_map0: cpu0: cpu@0 {
- 		device_type = "cpu";
- 		compatible = "arm,cortex-a72";
- 		reg = <0x0>;
-@@ -32,7 +32,7 @@
- 		#cooling-cells = <2>;
- 	};
- 
--	cpu2: cpu@100 {
-+	cooling_map1: cpu2: cpu@100 {
- 		device_type = "cpu";
- 		compatible = "arm,cortex-a72";
- 		reg = <0x100>;
-@@ -52,7 +52,7 @@
- 		#cooling-cells = <2>;
- 	};
- 
--	cpu4: cpu@200 {
-+	cooling_map2: cpu4: cpu@200 {
- 		device_type = "cpu";
- 		compatible = "arm,cortex-a72";
- 		reg = <0x200>;
-@@ -72,7 +72,7 @@
- 		#cooling-cells = <2>;
- 	};
- 
--	cpu6: cpu@300 {
-+	cooling_map3: cpu6: cpu@300 {
- 		device_type = "cpu";
- 		compatible = "arm,cortex-a72";
- 		reg = <0x300>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-@@ -77,42 +77,7 @@
- 		mask = <0x2>;
- 	};
- 
--	thermal-zones {
--		cpu_thermal: cpu-thermal {
--			polling-delay-passive = <1000>;
--			polling-delay = <5000>;
--
--			thermal-sensors = <&tmu 4>;
--
--			trips {
--				cpu_alert: cpu-alert {
--					temperature = <75000>;
--					hysteresis = <2000>;
--					type = "passive";
--				};
--				cpu_crit: cpu-crit {
--					temperature = <85000>;
--					hysteresis = <2000>;
--					type = "critical";
--				};
--			};
--
--			cooling-maps {
--				map0 {
--					trip = <&cpu_alert>;
--					cooling-device =
--						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
--				};
--			};
--		};
--	};
-+	#include "fsl-tmu.dtsi"
- 
- 	timer: timer {
- 		compatible = "arm,armv8-timer";
-@@ -906,3 +871,36 @@
- 		};
- 	};
- };
-+
-+#include "fsl-tmu-map1.dtsi"
-+#include "fsl-tmu-map2.dtsi"
-+#include "fsl-tmu-map3.dtsi"
-+&thermal_zones {
-+	thermal-zone1 {
-+		status = "okay";
-+	};
-+
-+	thermal-zone2{
-+		status = "okay";
-+	};
-+
-+	thermal-zone3{
-+		status = "okay";
-+	};
-+
-+	thermal-zone4{
-+		status = "okay";
-+	};
-+
-+	thermal-zone5{
-+		status = "okay";
-+	};
-+
-+	thermal-zone6{
-+		status = "okay";
-+	};
-+
-+	thermal-zone7 {
-+		status = "okay";
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi
-@@ -0,0 +1,99 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree Include file for Thermal Monitor Unit.
-+ *
-+ * Copyright 2018 NXP
-+ *
-+ * Tang Yuantian <andy.tang@nxp.com>
-+ *
-+ */
-+
-+&thermal_zones {
-+	thermal-zone0 {
-+		cooling-maps {
-+			map1 {
-+				trip = <&alert0>;
-+				cooling-device =
-+					<&cooling_map1 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone1 {
-+		cooling-maps {
-+			map1 {
-+				trip = <&alert1>;
-+				cooling-device =
-+					<&cooling_map1 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone2 {
-+		cooling-maps {
-+			map1 {
-+				trip = <&alert2>;
-+				cooling-device =
-+					<&cooling_map1 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone3 {
-+		cooling-maps {
-+			map1 {
-+				trip = <&alert3>;
-+				cooling-device =
-+					<&cooling_map1 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone4 {
-+		cooling-maps {
-+			map1 {
-+				trip = <&alert4>;
-+				cooling-device =
-+					<&cooling_map1 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone5 {
-+		cooling-maps {
-+			map1 {
-+				trip = <&alert5>;
-+				cooling-device =
-+					<&cooling_map1 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone6 {
-+		cooling-maps {
-+			map1 {
-+				trip = <&alert6>;
-+				cooling-device =
-+					<&cooling_map1 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone7 {
-+		cooling-maps {
-+			map1 {
-+				trip = <&alert7>;
-+				cooling-device =
-+					<&cooling_map1 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi
-@@ -0,0 +1,99 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree Include file for Thermal Monitor Unit.
-+ *
-+ * Copyright 2018 NXP
-+ *
-+ * Tang Yuantian <andy.tang@nxp.com>
-+ *
-+ */
-+
-+&thermal_zones {
-+	thermal-zone0 {
-+		cooling-maps {
-+			map2 {
-+				trip = <&alert0>;
-+				cooling-device =
-+					<&cooling_map2 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone1 {
-+		cooling-maps {
-+			map2 {
-+				trip = <&alert1>;
-+				cooling-device =
-+					<&cooling_map2 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone2 {
-+		cooling-maps {
-+			map2 {
-+				trip = <&alert2>;
-+				cooling-device =
-+					<&cooling_map2 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone3 {
-+		cooling-maps {
-+			map2 {
-+				trip = <&alert3>;
-+				cooling-device =
-+					<&cooling_map2 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone4 {
-+		cooling-maps {
-+			map2 {
-+				trip = <&alert4>;
-+				cooling-device =
-+					<&cooling_map2 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone5 {
-+		cooling-maps {
-+			map2 {
-+				trip = <&alert5>;
-+				cooling-device =
-+					<&cooling_map2 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone6 {
-+		cooling-maps {
-+			map2 {
-+				trip = <&alert6>;
-+				cooling-device =
-+					<&cooling_map2 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone7 {
-+		cooling-maps {
-+			map2 {
-+				trip = <&alert7>;
-+				cooling-device =
-+					<&cooling_map2 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi
-@@ -0,0 +1,99 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree Include file for Thermal Monitor Unit.
-+ *
-+ * Copyright 2018 NXP
-+ *
-+ * Tang Yuantian <andy.tang@nxp.com>
-+ *
-+ */
-+
-+&thermal_zones {
-+	thermal-zone0 {
-+		cooling-maps {
-+			map3 {
-+				trip = <&alert0>;
-+				cooling-device =
-+					<&cooling_map3 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone1 {
-+		cooling-maps {
-+			map3 {
-+				trip = <&alert1>;
-+				cooling-device =
-+					<&cooling_map3 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone2 {
-+		cooling-maps {
-+			map3 {
-+				trip = <&alert2>;
-+				cooling-device =
-+					<&cooling_map3 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone3 {
-+		cooling-maps {
-+			map3 {
-+				trip = <&alert3>;
-+				cooling-device =
-+					<&cooling_map3 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone4 {
-+		cooling-maps {
-+			map3 {
-+				trip = <&alert4>;
-+				cooling-device =
-+					<&cooling_map3 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone5 {
-+		cooling-maps {
-+			map3 {
-+				trip = <&alert5>;
-+				cooling-device =
-+					<&cooling_map3 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone6 {
-+		cooling-maps {
-+			map3 {
-+				trip = <&alert6>;
-+				cooling-device =
-+					<&cooling_map3 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone7 {
-+		cooling-maps {
-+			map3 {
-+				trip = <&alert7>;
-+				cooling-device =
-+					<&cooling_map3 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-tmu.dtsi
-@@ -0,0 +1,251 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree Include file for Thermal Monitor Unit.
-+ *
-+ * Copyright 2018 NXP
-+ *
-+ * Tang Yuantian <andy.tang@nxp.com>
-+ *
-+ */
-+
-+thermal_zones: thermal-zones {
-+	thermal_zone0: thermal-zone0 {
-+		polling-delay-passive = <1000>;
-+		polling-delay = <5000>;
-+		thermal-sensors = <&tmu 0>;
-+		status = "disabled";
-+
-+		trips {
-+			alert0: alert0 {
-+				temperature = <75000>;
-+				hysteresis = <2000>;
-+				type = "passive";
-+			};
-+
-+			crit0: crit0 {
-+				temperature = <85000>;
-+				hysteresis = <2000>;
-+				type = "critical";
-+			};
-+		};
-+
-+		cooling-maps {
-+			map0 {
-+				trip = <&alert0>;
-+				cooling-device =
-+					<&cooling_map0 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone1 {
-+		polling-delay-passive = <1000>;
-+		polling-delay = <5000>;
-+		thermal-sensors = <&tmu 1>;
-+		status = "disabled";
-+
-+		trips {
-+			alert1: alert1 {
-+				temperature = <75000>;
-+				hysteresis = <2000>;
-+				type = "passive";
-+			};
-+
-+			crit1: crit1 {
-+				temperature = <85000>;
-+				hysteresis = <2000>;
-+				type = "critical";
-+			};
-+		};
-+
-+		cooling-maps {
-+			map0 {
-+				trip = <&alert1>;
-+				cooling-device =
-+					<&cooling_map0 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone2 {
-+		polling-delay-passive = <1000>;
-+		polling-delay = <5000>;
-+		thermal-sensors = <&tmu 2>;
-+		status = "disabled";
-+
-+		trips {
-+			alert2: alert2 {
-+				temperature = <75000>;
-+				hysteresis = <2000>;
-+				type = "passive";
-+			};
-+
-+			crit2: crit2 {
-+				temperature = <85000>;
-+				hysteresis = <2000>;
-+				type = "critical";
-+			};
-+		};
-+
-+		cooling-maps {
-+			map0 {
-+				trip = <&alert2>;
-+				cooling-device =
-+					<&cooling_map0 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone3 {
-+		polling-delay-passive = <1000>;
-+		polling-delay = <5000>;
-+		thermal-sensors = <&tmu 3>;
-+		status = "disabled";
-+
-+		trips {
-+			alert3: alert3 {
-+				temperature = <75000>;
-+				hysteresis = <2000>;
-+				type = "passive";
-+			};
-+
-+			crit3: crit3 {
-+				temperature = <85000>;
-+				hysteresis = <2000>;
-+				type = "critical";
-+			};
-+		};
-+
-+		cooling-maps {
-+			map0 {
-+				trip = <&alert3>;
-+				cooling-device =
-+					<&cooling_map0 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone4 {
-+		polling-delay-passive = <1000>;
-+		polling-delay = <5000>;
-+		thermal-sensors = <&tmu 4>;
-+		status = "disabled";
-+
-+		trips {
-+			alert4: alert4 {
-+				temperature = <75000>;
-+				hysteresis = <2000>;
-+				type = "passive";
-+			};
-+
-+			crit4: crit4 {
-+				temperature = <85000>;
-+				hysteresis = <2000>;
-+				type = "critical";
-+			};
-+		};
-+
-+		cooling-maps {
-+			map0 {
-+				trip = <&alert4>;
-+				cooling-device =
-+					<&cooling_map0 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone5 {
-+		polling-delay-passive = <1000>;
-+		polling-delay = <5000>;
-+		thermal-sensors = <&tmu 5>;
-+		status = "disabled";
-+
-+		trips {
-+			alert5: alert5 {
-+				temperature = <75000>;
-+				hysteresis = <2000>;
-+				type = "passive";
-+			};
-+
-+			crit5: crit5 {
-+				temperature = <85000>;
-+				hysteresis = <2000>;
-+				type = "critical";
-+			};
-+		};
-+
-+		cooling-maps {
-+			map0 {
-+				trip = <&alert5>;
-+				cooling-device =
-+					<&cooling_map0 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone6 {
-+		polling-delay-passive = <1000>;
-+		polling-delay = <5000>;
-+		thermal-sensors = <&tmu 6>;
-+		status = "disabled";
-+
-+		trips {
-+			alert6: alert6 {
-+				temperature = <75000>;
-+				hysteresis = <2000>;
-+				type = "passive";
-+			};
-+
-+			crit6: crit6 {
-+				temperature = <85000>;
-+				hysteresis = <2000>;
-+				type = "critical";
-+			};
-+		};
-+
-+		cooling-maps {
-+			map0 {
-+				trip = <&alert6>;
-+				cooling-device =
-+					<&cooling_map0 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+
-+	thermal-zone7 {
-+		polling-delay-passive = <1000>;
-+		polling-delay = <5000>;
-+		thermal-sensors = <&tmu 7>;
-+		status = "disabled";
-+
-+		trips {
-+			alert7: alert7 {
-+				temperature = <75000>;
-+				hysteresis = <2000>;
-+				type = "passive";
-+			};
-+
-+			crit7: crit7 {
-+				temperature = <85000>;
-+				hysteresis = <2000>;
-+				type = "critical";
-+			};
-+		};
-+
-+		cooling-maps {
-+			map0 {
-+				trip = <&alert7>;
-+				cooling-device =
-+					<&cooling_map0 THERMAL_NO_LIMIT
-+					THERMAL_NO_LIMIT>;
-+			};
-+		};
-+	};
-+};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0026-arm64-dts-nxp-add-more-thermal-zone-support.patch b/target/linux/layerscape/patches-5.4/302-dts-0026-arm64-dts-nxp-add-more-thermal-zone-support.patch
deleted file mode 100644
index c9a9b5d271..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0026-arm64-dts-nxp-add-more-thermal-zone-support.patch
+++ /dev/null
@@ -1,314 +0,0 @@
-From 314a3a062e5e8fe76b3c43a8731ffe4bd58bc1be Mon Sep 17 00:00:00 2001
-From: Yuantian Tang <andy.tang@nxp.com>
-Date: Mon, 5 Nov 2018 17:40:20 +0800
-Subject: [PATCH] arm64: dts: nxp: add more thermal zone support
-
-To enable all the supported thermal sensors, add sensor id information
-to thermal zone node.
-Dts for ls1012a, ls1046a, ls1043a, ls1088a are updated.
-
-Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 39 ++++------------
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 61 ++++++++++++--------------
- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 57 ++++++++++--------------
- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 53 +++++++---------------
- 4 files changed, 75 insertions(+), 135 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-@@ -28,7 +28,7 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 
--		cpu0: cpu@0 {
-+		cooling_map0: cpu0: cpu@0 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a53";
- 			reg = <0x0>;
-@@ -100,36 +100,7 @@
- 		mask = <0x02>;
- 	};
- 
--	thermal-zones {
--		cpu_thermal: cpu-thermal {
--			polling-delay-passive = <1000>;
--			polling-delay = <5000>;
--			thermal-sensors = <&tmu 0>;
--
--			trips {
--				cpu_alert: cpu-alert {
--					temperature = <85000>;
--					hysteresis = <2000>;
--					type = "passive";
--				};
--
--				cpu_crit: cpu-crit {
--					temperature = <95000>;
--					hysteresis = <2000>;
--					type = "critical";
--				};
--			};
--
--			cooling-maps {
--				map0 {
--					trip = <&cpu_alert>;
--					cooling-device =
--						<&cpu0 THERMAL_NO_LIMIT
--						THERMAL_NO_LIMIT>;
--				};
--			};
--		};
--	};
-+	#include "fsl-tmu.dtsi"
- 
- 	soc {
- 		compatible = "simple-bus";
-@@ -573,3 +544,9 @@
- 		};
- 	};
- };
-+
-+&thermal_zones {
-+	thermal-zone0 {
-+		status = "okay";
-+	};
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -39,7 +39,7 @@
- 		 *
- 		 * Currently supported enable-method is psci v0.2
- 		 */
--		cpu0: cpu@0 {
-+		cooling_map0: cpu0: cpu@0 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a53";
- 			reg = <0x0>;
-@@ -148,38 +148,7 @@
- 		mask = <0x02>;
- 	};
- 
--	thermal-zones {
--		cpu_thermal: cpu-thermal {
--			polling-delay-passive = <1000>;
--			polling-delay = <5000>;
--
--			thermal-sensors = <&tmu 3>;
--
--			trips {
--				cpu_alert: cpu-alert {
--					temperature = <85000>;
--					hysteresis = <2000>;
--					type = "passive";
--				};
--				cpu_crit: cpu-crit {
--					temperature = <95000>;
--					hysteresis = <2000>;
--					type = "critical";
--				};
--			};
--
--			cooling-maps {
--				map0 {
--					trip = <&cpu_alert>;
--					cooling-device =
--						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
--				};
--			};
--		};
--	};
-+	#include "fsl-tmu.dtsi"
- 
- 	timer {
- 		compatible = "arm,armv8-timer";
-@@ -916,3 +885,29 @@
- 
- #include "qoriq-qman-portals.dtsi"
- #include "qoriq-bman-portals.dtsi"
-+
-+&thermal_zones {
-+	thermal-zone0 {
-+		status = "okay";
-+	};
-+
-+	thermal-zone1 {
-+		status = "okay";
-+	};
-+
-+	thermal-zone2 {
-+		status = "okay";
-+	};
-+
-+	thermal-zone3 {
-+		status = "okay";
-+	};
-+
-+	thermal-zone4 {
-+		status = "okay";
-+	};
-+
-+	thermal-zone5 {
-+		status = "okay";
-+	};
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-@@ -34,7 +34,7 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 
--		cpu0: cpu@0 {
-+		cooling_map0: cpu0: cpu@0 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			reg = <0x0>;
-@@ -116,38 +116,7 @@
- 		mask = <0x02>;
- 	};
- 
--	thermal-zones {
--		cpu_thermal: cpu-thermal {
--			polling-delay-passive = <1000>;
--			polling-delay = <5000>;
--			thermal-sensors = <&tmu 3>;
--
--			trips {
--				cpu_alert: cpu-alert {
--					temperature = <85000>;
--					hysteresis = <2000>;
--					type = "passive";
--				};
--
--				cpu_crit: cpu-crit {
--					temperature = <95000>;
--					hysteresis = <2000>;
--					type = "critical";
--				};
--			};
--
--			cooling-maps {
--				map0 {
--					trip = <&cpu_alert>;
--					cooling-device =
--						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
--				};
--			};
--		};
--	};
-+	#include "fsl-tmu.dtsi"
- 
- 	timer {
- 		compatible = "arm,armv8-timer";
-@@ -883,3 +852,25 @@
- 
- #include "qoriq-qman-portals.dtsi"
- #include "qoriq-bman-portals.dtsi"
-+
-+&thermal_zones {
-+	thermal-zone0 {
-+		status = "okay";
-+	};
-+
-+	thermal-zone1 {
-+		status = "okay";
-+	};
-+
-+	thermal-zone2 {
-+		status = "okay";
-+	};
-+
-+	thermal-zone3 {
-+		status = "okay";
-+	};
-+
-+	thermal-zone4 {
-+		status = "okay";
-+	};
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-@@ -25,7 +25,7 @@
- 		#size-cells = <0>;
- 
- 		/* We have 2 clusters having 4 Cortex-A53 cores each */
--		cpu0: cpu@0 {
-+		cooling_map0: cpu0: cpu@0 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a53";
- 			reg = <0x0>;
-@@ -61,7 +61,7 @@
- 			#cooling-cells = <2>;
- 		};
- 
--		cpu4: cpu@100 {
-+		cooling_map1: cpu4: cpu@100 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a53";
- 			reg = <0x100>;
-@@ -128,42 +128,7 @@
- 		};
- 	};
- 
--	thermal-zones {
--		cpu_thermal: cpu-thermal {
--			polling-delay-passive = <1000>;
--			polling-delay = <5000>;
--			thermal-sensors = <&tmu 0>;
--
--			trips {
--				cpu_alert: cpu-alert {
--					temperature = <85000>;
--					hysteresis = <2000>;
--					type = "passive";
--				};
--
--				cpu_crit: cpu-crit {
--					temperature = <95000>;
--					hysteresis = <2000>;
--					type = "critical";
--				};
--			};
--
--			cooling-maps {
--				map0 {
--					trip = <&cpu_alert>;
--					cooling-device =
--						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--						<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
--				};
--			};
--		};
--	};
-+	#include "fsl-tmu.dtsi"
- 
- 	timer {
- 		compatible = "arm,armv8-timer";
-@@ -879,3 +844,15 @@
- 		};
- 	};
- };
-+
-+#include "fsl-tmu-map1.dtsi"
-+
-+&thermal_zones {
-+	thermal-zone0 {
-+		status = "okay";
-+	};
-+
-+	thermal-zone1 {
-+		status = "okay";
-+	};
-+};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0027-arm64-dts-lx2160a-rdb-Add-Inphi-PHY-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0027-arm64-dts-lx2160a-rdb-Add-Inphi-PHY-node.patch
deleted file mode 100644
index 90f0e3c0d7..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0027-arm64-dts-lx2160a-rdb-Add-Inphi-PHY-node.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 7ff4d2213c5b21008bebf43ae5a60b4275f91c55 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Mon, 29 Oct 2018 18:41:07 +0200
-Subject: [PATCH] arm64: dts: lx2160a-rdb: Add Inphi PHY node
-
-DPMAC5 and DPMAC6 are connected to 25G Inphi PHY
-
-Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@nxp.com>
-Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-@@ -175,6 +175,23 @@
- 	};
- };
- 
-+&emdio2 {
-+	inphi_phy: emdio2_phy@0 {
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		reg = <0x0>;
-+		interrupts = <0 9 IRQ_TYPE_EDGE_FALLING>,
-+			<0 10 IRQ_TYPE_EDGE_FALLING>;
-+	};
-+};
-+
-+&dpmac5 {
-+	phy-handle = <&inphi_phy>;
-+};
-+
-+&dpmac6 {
-+	phy-handle = <&inphi_phy>;
-+};
-+
- &dpmac17 {
- 	phy-handle = <&rgmii_phy1>;
- 	phy-connection-type = "rgmii-id";
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0028-arm64-dts-lx2160a-rdb-Add-Aquantia-PHY-nodes.patch b/target/linux/layerscape/patches-5.4/302-dts-0028-arm64-dts-lx2160a-rdb-Add-Aquantia-PHY-nodes.patch
deleted file mode 100644
index f2d4f49995..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0028-arm64-dts-lx2160a-rdb-Add-Aquantia-PHY-nodes.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 917e2edbf55e5bc6c98802a610d8b7c05c4e9c78 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Mon, 29 Oct 2018 18:54:05 +0200
-Subject: [PATCH] arm64: dts: lx2160a-rdb: Add Aquantia PHY nodes
-
-DPMAC3 and DPMAC4 are connected to 10G Aquantia PHYs
-
-Signed-off-by: Catalin Neacsu <valentin-catalin.neacsu@nxp.com>
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 22 ++++++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-@@ -173,6 +173,18 @@
- 		reg = <0x2>;
- 		/* Poll mode - no "interrupts" property defined */
- 	};
-+	aquantia_phy1: ethernet-phy@4 {
-+		/* AQR107 PHY - "compatible" property not strictly needed */
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		reg = <0x4>;
-+		/* Poll mode - no "interrupts" property defined */
-+	};
-+	aquantia_phy2: ethernet-phy@5 {
-+		/* AQR107 PHY - "compatible" property not strictly needed */
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		reg = <0x5>;
-+		/* Poll mode - no "interrupts" property defined */
-+	};
- };
- 
- &emdio2 {
-@@ -184,6 +196,16 @@
- 	};
- };
- 
-+&dpmac3 {
-+	phy-handle = <&aquantia_phy1>;
-+	phy-connection-type = "xgmii";
-+};
-+
-+&dpmac4 {
-+	phy-handle = <&aquantia_phy2>;
-+	phy-connection-type = "xgmii";
-+};
-+
- &dpmac5 {
- 	phy-handle = <&inphi_phy>;
- };
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0029-arm64-dts-lx2160-Add-all-pcs-mdio-definitions-accord.patch b/target/linux/layerscape/patches-5.4/302-dts-0029-arm64-dts-lx2160-Add-all-pcs-mdio-definitions-accord.patch
deleted file mode 100644
index de1997554e..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0029-arm64-dts-lx2160-Add-all-pcs-mdio-definitions-accord.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From 39c8c9b6e4db9694935fe4a856ea66ff36ace7d0 Mon Sep 17 00:00:00 2001
-From: Florinel Iordache <florinel.iordache@nxp.com>
-Date: Tue, 30 Oct 2018 09:42:39 +0200
-Subject: [PATCH] arm64: dts: lx2160: Add all pcs mdio definitions according to
- RM
-
-This change is required in preparation for adding 40GBase-KR support in DTS for LX2160
-
-Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 85 ++++++++++++++++++++++++++
- 1 file changed, 85 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -500,6 +500,91 @@
- 			#size-cells = <0>;
- 		};
- 
-+		pcs_mdio1: mdio@0x8c07000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c07000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio2: mdio@0x8c0b000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c0b000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio3: mdio@0x8c0f000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c0f000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio4: mdio@0x8c13000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c13000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio5: mdio@0x8c17000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c17000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio6: mdio@0x8c1b000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c1b000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio7: mdio@0x8c1f000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c1f000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		pcs_mdio8: mdio@0x8c23000 {
-+			compatible = "fsl,fman-memac-mdio";
-+			reg = <0x0 0x8c23000 0x0 0x1000>;
-+			device_type = "mdio";
-+			little-endian;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		serdes1: serdes@1ea0000 {
-+				reg = <0x0 0x1ea0000 0 0x00002000>;
-+				compatible = "fsl,serdes-28g";
-+		};
-+
- 		i2c0: i2c@2000000 {
- 			compatible = "fsl,vf610-i2c";
- 			#address-cells = <1>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0030-arm64-dts-lx2160-PCS-PHY-definitions-for-10GBase-KR-.patch b/target/linux/layerscape/patches-5.4/302-dts-0030-arm64-dts-lx2160-PCS-PHY-definitions-for-10GBase-KR-.patch
deleted file mode 100644
index 22b2b64d79..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0030-arm64-dts-lx2160-PCS-PHY-definitions-for-10GBase-KR-.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From c1619d9de2da093a585426e9cef353ca1789236d Mon Sep 17 00:00:00 2001
-From: Florinel Iordache <florinel.iordache@nxp.com>
-Date: Mon, 5 Nov 2018 17:02:19 +0200
-Subject: [PATCH] arm64: dts: lx2160: PCS PHY definitions for 10GBase-KR and
- 40GBase-KR backplane modes
-
-Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 40 +++++++++++++++++++++++
- 1 file changed, 40 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
-@@ -162,3 +162,43 @@
- &usb1 {
- 	status = "okay";
- };
-+
-+&pcs_mdio1 {
-+	pcs_phy1: ethernet-phy@0 {
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		backplane-mode = "40gbase-kr";
-+		reg = <0x0>;
-+		fsl,lane-handle = <&serdes1>;
-+		fsl,lane-reg = <0xF00 0xE00 0xD00 0xC00>; /* lanes H, G, F, E */
-+	};
-+};
-+
-+&pcs_mdio2 {
-+	pcs_phy2: ethernet-phy@0 {
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		backplane-mode = "40gbase-kr";
-+		reg = <0x0>;
-+		fsl,lane-handle = <&serdes1>;
-+		fsl,lane-reg = <0xB00 0xA00 0x900 0x800>; /* lanes D, C, B, A */
-+	};
-+};
-+
-+&pcs_mdio3 {
-+	pcs_phy3: ethernet-phy@0 {
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		backplane-mode = "10gbase-kr";
-+		reg = <0x0>;
-+		fsl,lane-handle = <&serdes1>;
-+		fsl,lane-reg = <0xF00 0x100>; /* lane H */
-+	};
-+};
-+
-+&pcs_mdio4 {
-+	pcs_phy4: ethernet-phy@0 {
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+		backplane-mode = "10gbase-kr";
-+		reg = <0x0>;
-+		fsl,lane-handle = <&serdes1>;
-+		fsl,lane-reg = <0xE00 0x100>; /* lane G */
-+	};
-+};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0031-arm64-dts-lx2160-DPMAC-connections-to-backplane-PHYs.patch b/target/linux/layerscape/patches-5.4/302-dts-0031-arm64-dts-lx2160-DPMAC-connections-to-backplane-PHYs.patch
deleted file mode 100644
index d054745455..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0031-arm64-dts-lx2160-DPMAC-connections-to-backplane-PHYs.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 01af235657e4d8f5f87b5e06bcf42baf53e1ff8d Mon Sep 17 00:00:00 2001
-From: Florinel Iordache <florinel.iordache@nxp.com>
-Date: Mon, 5 Nov 2018 17:03:04 +0200
-Subject: [PATCH] arm64: dts: lx2160: DPMAC connections to backplane PHYs
- example
-
-This is an example of device tree nodes required to enable 10GBase-KR and 40GBase-KR on LX2160
-
-Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 20 ++++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
-@@ -202,3 +202,23 @@
- 		fsl,lane-reg = <0xE00 0x100>; /* lane G */
- 	};
- };
-+
-+/* Update DPMAC connections to 40G backplane PHYs
-+ * &dpmac1 {
-+ *	phy-handle = <&pcs_phy1>;
-+ * };
-+ * 
-+ * &dpmac2 {
-+ *	phy-handle = <&pcs_phy2>;
-+ * };
-+ */
-+
-+/* Update DPMAC connections to 10G backplane PHYs
-+ * &dpmac3 {
-+ *	phy-handle = <&pcs_phy3>;
-+ * };
-+ * 
-+ * &dpmac4 {
-+ *	phy-handle = <&pcs_phy4>;
-+ * };
-+ */
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0032-arm64-dts-Added-endianness-information-to-dts-serdes.patch b/target/linux/layerscape/patches-5.4/302-dts-0032-arm64-dts-Added-endianness-information-to-dts-serdes.patch
deleted file mode 100644
index b19431d567..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0032-arm64-dts-Added-endianness-information-to-dts-serdes.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From d783144d6738af1d2ef3a91ef3cb2ef8529bb041 Mon Sep 17 00:00:00 2001
-From: Florinel Iordache <florinel.iordache@nxp.com>
-Date: Mon, 5 Nov 2018 17:04:05 +0200
-Subject: [PATCH] arm64: dts: Added endianness information to dts serdes node
-
-This change is required to specify that serdes HW peripheral is little-endian.
-
-Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 3 ++-
- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 3 ++-
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 3 ++-
- 3 files changed, 6 insertions(+), 3 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-@@ -184,8 +184,9 @@
- 		};
- 
- 		serdes1: serdes@1ea0000 {
--				reg = <0x0 0x1ea0000 0 0x00002000>;
- 				compatible = "fsl,serdes-10g";
-+				reg = <0x0 0x1ea0000 0 0x00002000>;
-+				little-endian;
- 		};
- 
- 		tmu: tmu@1f80000 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-@@ -833,8 +833,9 @@
- 		};
- 
- 		serdes1: serdes@1ea0000 {
--				reg = <0x0 0x1ea0000 0 0x00002000>;
- 				compatible = "fsl,serdes-10g";
-+				reg = <0x0 0x1ea0000 0 0x00002000>;
-+				little-endian;
- 		};
- 
- 		ccn@4000000 {
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -581,8 +581,9 @@
- 		};
- 
- 		serdes1: serdes@1ea0000 {
--				reg = <0x0 0x1ea0000 0 0x00002000>;
- 				compatible = "fsl,serdes-28g";
-+				reg = <0x0 0x1ea0000 0 0x00002000>;
-+				little-endian;
- 		};
- 
- 		i2c0: i2c@2000000 {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0033-arm64-dts-freescale-lx2160a-add-pcie-DT-nodes.patch b/target/linux/layerscape/patches-5.4/302-dts-0033-arm64-dts-freescale-lx2160a-add-pcie-DT-nodes.patch
deleted file mode 100644
index 26d484d942..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0033-arm64-dts-freescale-lx2160a-add-pcie-DT-nodes.patch
+++ /dev/null
@@ -1,183 +0,0 @@
-From 86e03654997db1b70e71f717ab3e74b1df2f402c Mon Sep 17 00:00:00 2001
-From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-Date: Thu, 13 Jul 2017 18:28:27 +0800
-Subject: [PATCH] arm64: dts: freescale: lx2160a: add pcie DT nodes
-
-The LX2160A integrated 6 PCIe Gen4 controllers.
-
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 162 +++++++++++++++++++++++++
- 1 file changed, 162 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -903,6 +903,168 @@
- 			status = "disabled";
- 		};
- 
-+		pcie@3400000 {
-+			compatible = "fsl,lx2160a-pcie";
-+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
-+			       0x80 0x00000000 0x0 0x00001000>; /* configuration space */
-+			reg-names = "csr_axi_slave", "config_axi_slave";
-+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
-+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
-+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
-+			interrupt-names = "aer", "pme", "intr";
-+			#address-cells = <3>;
-+			#size-cells = <2>;
-+			device_type = "pci";
-+			dma-coherent;
-+			apio-wins = <8>;
-+			ppio-wins = <8>;
-+			bus-range = <0x0 0xff>;
-+			ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-+			msi-parent = <&its>;
-+			#interrupt-cells = <1>;
-+			interrupt-map-mask = <0 0 0 7>;
-+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
-+		pcie@3500000 {
-+			compatible = "fsl,lx2160a-pcie";
-+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
-+			       0x88 0x00000000 0x0 0x00001000>; /* configuration space */
-+			reg-names = "csr_axi_slave", "config_axi_slave";
-+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
-+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
-+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
-+			interrupt-names = "aer", "pme", "intr";
-+			#address-cells = <3>;
-+			#size-cells = <2>;
-+			device_type = "pci";
-+			dma-coherent;
-+			apio-wins = <8>;
-+			ppio-wins = <8>;
-+			bus-range = <0x0 0xff>;
-+			ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-+			msi-parent = <&its>;
-+			#interrupt-cells = <1>;
-+			interrupt-map-mask = <0 0 0 7>;
-+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
-+		pcie@3600000 {
-+			compatible = "fsl,lx2160a-pcie";
-+			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
-+			       0x90 0x00000000 0x0 0x00001000>; /* configuration space */
-+			reg-names = "csr_axi_slave", "config_axi_slave";
-+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
-+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
-+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
-+			interrupt-names = "aer", "pme", "intr";
-+			#address-cells = <3>;
-+			#size-cells = <2>;
-+			device_type = "pci";
-+			dma-coherent;
-+			apio-wins = <8>;
-+			ppio-wins = <8>;
-+			bus-range = <0x0 0xff>;
-+			ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-+			msi-parent = <&its>;
-+			#interrupt-cells = <1>;
-+			interrupt-map-mask = <0 0 0 7>;
-+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 2 &gic 0 0 GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 3 &gic 0 0 GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 4 &gic 0 0 GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
-+		pcie@3700000 {
-+			compatible = "fsl,lx2160a-pcie";
-+			reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
-+			       0x98 0x00000000 0x0 0x00001000>; /* configuration space */
-+			reg-names = "csr_axi_slave", "config_axi_slave";
-+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
-+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
-+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
-+			interrupt-names = "aer", "pme", "intr";
-+			#address-cells = <3>;
-+			#size-cells = <2>;
-+			device_type = "pci";
-+			dma-coherent;
-+			apio-wins = <8>;
-+			ppio-wins = <8>;
-+			bus-range = <0x0 0xff>;
-+			ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-+			msi-parent = <&its>;
-+			#interrupt-cells = <1>;
-+			interrupt-map-mask = <0 0 0 7>;
-+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 2 &gic 0 0 GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 3 &gic 0 0 GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 4 &gic 0 0 GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
-+		pcie@3800000 {
-+			compatible = "fsl,lx2160a-pcie";
-+			reg = <0x00 0x03800000 0x0 0x00100000   /* controller registers */
-+			       0xa0 0x00000000 0x0 0x00001000>; /* configuration space */
-+			reg-names = "csr_axi_slave", "config_axi_slave";
-+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
-+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
-+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
-+			interrupt-names = "aer", "pme", "intr";
-+			#address-cells = <3>;
-+			#size-cells = <2>;
-+			device_type = "pci";
-+			dma-coherent;
-+			apio-wins = <8>;
-+			ppio-wins = <8>;
-+			bus-range = <0x0 0xff>;
-+			ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-+			msi-parent = <&its>;
-+			#interrupt-cells = <1>;
-+			interrupt-map-mask = <0 0 0 7>;
-+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 2 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 3 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 4 &gic 0 0 GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
-+		pcie@3900000 {
-+			compatible = "fsl,lx2160a-pcie";
-+			reg = <0x00 0x03900000 0x0 0x00100000   /* controller registers */
-+			       0xa8 0x00000000 0x0 0x00001000>; /* configuration space */
-+			reg-names = "csr_axi_slave", "config_axi_slave";
-+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
-+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
-+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
-+			interrupt-names = "aer", "pme", "intr";
-+			#address-cells = <3>;
-+			#size-cells = <2>;
-+			device_type = "pci";
-+			dma-coherent;
-+			apio-wins = <8>;
-+			ppio-wins = <8>;
-+			bus-range = <0x0 0xff>;
-+			ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-+			msi-parent = <&its>;
-+			#interrupt-cells = <1>;
-+			interrupt-map-mask = <0 0 0 7>;
-+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 2 &gic 0 0 GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 3 &gic 0 0 GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 4 &gic 0 0 GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
- 		smmu: iommu@5000000 {
- 			compatible = "arm,mmu-500";
- 			reg = <0 0x5000000 0 0x800000>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0034-arm64-dts-freescale-lx2160a-Inphi-in112525_s03-mdio-.patch b/target/linux/layerscape/patches-5.4/302-dts-0034-arm64-dts-freescale-lx2160a-Inphi-in112525_s03-mdio-.patch
deleted file mode 100644
index 7e3cdb663d..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0034-arm64-dts-freescale-lx2160a-Inphi-in112525_s03-mdio-.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From fa7b2d215b494f912b591f28c1205593bccfc2cc Mon Sep 17 00:00:00 2001
-From: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
-Date: Sun, 16 Dec 2018 23:05:12 +0200
-Subject: [PATCH] arm64: dts: freescale: lx2160a: Inphi in112525_s03 mdio node
-
-Add Inphi retimer phyid in the mdio node, solving the probe issue
-for this non-standard clause-45 device.
-
-Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-@@ -188,11 +188,9 @@
- };
- 
- &emdio2 {
--	inphi_phy: emdio2_phy@0 {
--		compatible = "ethernet-phy-ieee802.3-c45";
-+	inphi_phy: ethernet-phy@0 {
-+		compatible = "ethernet-phy-id0210.7440";
- 		reg = <0x0>;
--		interrupts = <0 9 IRQ_TYPE_EDGE_FALLING>,
--			<0 10 IRQ_TYPE_EDGE_FALLING>;
- 	};
- };
- 
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0035-arm64-dts-lx2160a-add-optee-tz-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0035-arm64-dts-lx2160a-add-optee-tz-node.patch
deleted file mode 100644
index da82d44f29..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0035-arm64-dts-lx2160a-add-optee-tz-node.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 9ab6cc70cd84ca4a140b30b8a0a2371a3585a72a Mon Sep 17 00:00:00 2001
-From: Pankaj Gupta <pankaj.gupta@nxp.com>
-Date: Tue, 27 Nov 2018 15:33:08 +0530
-Subject: [PATCH] arm64: dts: lx2160a: add optee-tz node
-
-Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -1287,4 +1287,11 @@
- 			};
- 		};
- 	};
-+
-+	firmware {
-+		optee {
-+			compatible = "linaro,optee-tz";
-+			method = "smc";
-+		};
-+	};
- };
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0036-arm64-dts-ls104x-constrain-sata-dma-address-size.patch b/target/linux/layerscape/patches-5.4/302-dts-0036-arm64-dts-ls104x-constrain-sata-dma-address-size.patch
deleted file mode 100644
index 486bb23c2a..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0036-arm64-dts-ls104x-constrain-sata-dma-address-size.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 4a7dcac3fd18b182f882b65161267612713f72dc Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 11 Dec 2018 13:32:31 +0200
-Subject: [PATCH] arm64: dts: ls104x: constrain sata dma address size
-
-Limit the dma mask size for sata to 40 bits to match the actual address
-size generated towards the interconnect. Re-use the already existing
-auxiliary simple bus meant for usb but drop the usb reference from the
-node name.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 18 +++++++++---------
- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 18 +++++++++---------
- 2 files changed, 18 insertions(+), 18 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -696,7 +696,7 @@
- 				 <&clockgen 4 0>;
- 		};
- 
--		usb_aux_bus: usb_aux_bus {
-+		aux_bus: aux_bus {
- 			#address-cells = <2>;
- 			#size-cells = <2>;
- 			compatible = "simple-bus";
-@@ -741,15 +741,15 @@
- 				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 				configure-gfladj;
- 			};
--		};
- 
--		sata: sata@3200000 {
--			compatible = "fsl,ls1043a-ahci";
--			reg = <0x0 0x3200000 0x0 0x10000>,
--				<0x0 0x20140520 0x0 0x4>;
--			reg-names = "ahci", "sata-ecc";
--			interrupts = <0 69 0x4>;
--			clocks = <&clockgen 4 0>;
-+			sata: sata@3200000 {
-+				compatible = "fsl,ls1043a-ahci";
-+				reg = <0x0 0x3200000 0x0 0x10000>,
-+					<0x0 0x20140520 0x0 0x4>;
-+				reg-names = "ahci", "sata-ecc";
-+				interrupts = <0 69 0x4>;
-+				clocks = <&clockgen 4 0>;
-+			};
- 		};
- 
- 		msi1: msi-controller1@1571000 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-@@ -594,7 +594,7 @@
- 				 <&clockgen 4 1>;
- 		};
- 
--		usb_aux_bus: usb_aux_bus {
-+		aux_bus: aux_bus {
- 			#address-cells = <2>;
- 			#size-cells = <2>;
- 			compatible = "simple-bus";
-@@ -636,15 +636,15 @@
- 				usb3-lpm-capable;
- 				snps,dis-u1u2-when-u3-quirk;
- 			};
--		};
- 
--		sata: sata@3200000 {
--			compatible = "fsl,ls1046a-ahci";
--			reg = <0x0 0x3200000 0x0 0x10000>,
--				<0x0 0x20140520 0x0 0x4>;
--			reg-names = "ahci", "sata-ecc";
--			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
--			clocks = <&clockgen 4 1>;
-+			sata: sata@3200000 {
-+				compatible = "fsl,ls1046a-ahci";
-+				reg = <0x0 0x3200000 0x0 0x10000>,
-+					<0x0 0x20140520 0x0 0x4>;
-+				reg-names = "ahci", "sata-ecc";
-+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-+				clocks = <&clockgen 4 1>;
-+			};
- 		};
- 
- 		msi1: msi-controller@1580000 {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0037-arm64-dts-lx2160a-qds-add-sata-node-support.patch b/target/linux/layerscape/patches-5.4/302-dts-0037-arm64-dts-lx2160a-qds-add-sata-node-support.patch
deleted file mode 100644
index b8a44837aa..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0037-arm64-dts-lx2160a-qds-add-sata-node-support.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 4551b9c547f7bf7b40d83f8762c77cee0041f5eb Mon Sep 17 00:00:00 2001
-From: Peng Ma <peng.ma@nxp.com>
-Date: Mon, 14 Jan 2019 08:26:40 +0000
-Subject: [PATCH] arm64: dts: lx2160a-qds: add sata node support
-
-Add sata node support and Enable sata support
-
-Signed-off-by: Peng Ma <peng.ma@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
-@@ -203,6 +203,22 @@
- 	};
- };
- 
-+&sata0 {
-+	status = "okay";
-+};
-+
-+&sata1 {
-+	status = "okay";
-+};
-+
-+&sata2 {
-+	status = "okay";
-+};
-+
-+&sata3 {
-+	status = "okay";
-+};
-+
- /* Update DPMAC connections to 40G backplane PHYs
-  * &dpmac1 {
-  *	phy-handle = <&pcs_phy1>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0038-arm64-dts-ls1012a-use-phy-handle-to-handle-phy-param.patch b/target/linux/layerscape/patches-5.4/302-dts-0038-arm64-dts-ls1012a-use-phy-handle-to-handle-phy-param.patch
deleted file mode 100644
index f6e7bf0b9c..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0038-arm64-dts-ls1012a-use-phy-handle-to-handle-phy-param.patch
+++ /dev/null
@@ -1,242 +0,0 @@
-From 203a34f815c7e9320140bb2259ae5884575f0658 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Tue, 20 Nov 2018 21:52:03 +0530
-Subject: [PATCH] arm64: dts: ls1012a: use phy-handle to handle phy params
-
-Replace properties "fsl,gemac-phy-id" and "fsl,pfe-phy-if-flags"
-and use phy-handle instead.
-Create mdio node with phy-handles defining PHYs available on the
-mdio bus.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- .../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts      | 25 +++++++++++++---------
- arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 23 +++++++++++---------
- arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts | 23 +++++++++++---------
- arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts  | 25 +++++++++++++---------
- arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts  | 22 ++++++++++---------
- 5 files changed, 68 insertions(+), 50 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
-@@ -58,14 +58,9 @@
- 		#size-cells = <0>;
- 		reg = <0x0>;	/* GEM_ID */
- 		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
--		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
- 		fsl,mdio-mux-val = <0x0>;
- 		phy-mode = "sgmii-2500";
--		fsl,pfe-phy-if-flags = <0x0>;
--
--		mdio@0 {
--			reg = <0x1>; /* enabled/disabled */
--		};
-+		phy-handle = <&sgmii_phy1>;
- 	};
- 
- 	ethernet@1 {
-@@ -74,13 +69,23 @@
- 		#size-cells = <0>;
- 		reg = <0x1>;	/* GEM_ID */
- 		fsl,gemac-bus-id = < 0x0>;	/* BUS_ID */
--		fsl,gemac-phy-id = < 0x2>;	/* PHY_ID */
- 		fsl,mdio-mux-val = <0x0>;
- 		phy-mode = "sgmii-2500";
--		fsl,pfe-phy-if-flags = <0x0>;
-+		phy-handle = <&sgmii_phy2>;
-+	};
-+
-+	mdio@0 {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		sgmii_phy1: ethernet-phy@1 {
-+			compatible = "ethernet-phy-ieee802.3-c45";
-+			reg = <0x1>;
-+		};
- 
--		mdio@0 {
--			reg = <0x0>; /* enabled/disabled */
-+		sgmii_phy2: ethernet-phy@2 {
-+			compatible = "ethernet-phy-ieee802.3-c45";
-+			reg = <0x2>;
- 		};
- 	};
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
-@@ -90,14 +90,9 @@
- 		#size-cells = <0>;
- 		reg = <0x0>;	/* GEM_ID */
- 		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
--		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
- 		fsl,mdio-mux-val = <0x0>;
- 		phy-mode = "sgmii";
--		fsl,pfe-phy-if-flags = <0x0>;
--
--		mdio@0 {
--			reg = <0x1>; /* enabled/disabled */
--		};
-+		phy-handle = <&sgmii_phy1>;
- 	};
- 
- 	ethernet@1 {
-@@ -106,13 +101,21 @@
- 		#size-cells = <0>;
- 		reg = <0x1>;	/* GEM_ID */
- 		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
--		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
- 		fsl,mdio-mux-val = <0x0>;
- 		phy-mode = "sgmii";
--		fsl,pfe-phy-if-flags = <0x0>;
-+		phy-handle = <&sgmii_phy2>;
-+	};
-+
-+	mdio@0 {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		sgmii_phy1: ethernet-phy@2 {
-+			reg = <0x2>;
-+		};
- 
--		mdio@0 {
--			reg = <0x0>; /* enabled/disabled */
-+		sgmii_phy2: ethernet-phy@1 {
-+			reg = <0x1>;
- 		};
- 	};
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
-@@ -111,14 +111,9 @@
- 		#size-cells = <0>;
- 		reg = <0x0>;	/* GEM_ID */
- 		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
--		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
- 		fsl,mdio-mux-val = <0x0>;
- 		phy-mode = "sgmii";
--		fsl,pfe-phy-if-flags = <0x0>;
--
--		mdio@0 {
--			reg = <0x1>; /* enabled/disabled */
--		};
-+		phy-handle = <&sgmii_phy1>;
- 	};
- 
- 	ethernet@1 {
-@@ -127,13 +122,21 @@
- 		#size-cells = <0>;
- 		reg = <0x1>;	/* GEM_ID */
- 		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
--		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
- 		fsl,mdio-mux-val = <0x0>;
- 		phy-mode = "sgmii";
--		fsl,pfe-phy-if-flags = <0x0>;
-+		phy-handle = <&sgmii_phy2>;
-+	};
-+
-+	mdio@0 {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		sgmii_phy1: ethernet-phy@2 {
-+			reg = <0x2>;
-+		};
- 
--		mdio@0 {
--			reg = <0x0>; /* enabled/disabled */
-+		sgmii_phy2: ethernet-phy@1 {
-+			reg = <0x1>;
- 		};
- 	};
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
-@@ -148,14 +148,9 @@
- 		#size-cells = <0>;
- 		reg = <0x0>;	/* GEM_ID */
- 		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
--		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
- 		fsl,mdio-mux-val = <0x2>;
- 		phy-mode = "sgmii-2500";
--		fsl,pfe-phy-if-flags = <0x0>;
--
--		mdio@0 {
--			reg = <0x1>; /* enabled/disabled */
--		};
-+		phy-handle = <&sgmii_phy1>;
- 	};
- 
- 	ethernet@1 {
-@@ -164,13 +159,23 @@
- 		#size-cells = <0>;
- 		reg = <0x1>;	/* GEM_ID */
- 		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
--		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
- 		fsl,mdio-mux-val = <0x3>;
- 		phy-mode = "sgmii-2500";
--		fsl,pfe-phy-if-flags = <0x0>;
-+		phy-handle = <&sgmii_phy2>;
-+	};
-+
-+	mdio@0 {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		sgmii_phy1: ethernet-phy@1 {
-+			compatible = "ethernet-phy-ieee802.3-c45";
-+			reg = <0x1>;
-+		};
- 
--		mdio@0 {
--			reg = <0x0>; /* enabled/disabled */
-+		sgmii_phy2: ethernet-phy@2 {
-+			compatible = "ethernet-phy-ieee802.3-c45";
-+			reg = <0x2>;
- 		};
- 	};
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-@@ -59,14 +59,9 @@
- 		#size-cells = <0>;
- 		reg = <0x0>;	/* GEM_ID */
- 		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
--		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
- 		fsl,mdio-mux-val = <0x0>;
- 		phy-mode = "sgmii";
--		fsl,pfe-phy-if-flags = <0x0>;
--
--		mdio@0 {
--			reg = <0x1>; /* enabled/disabled */
--		};
-+		phy-handle = <&sgmii_phy>;
- 	};
- 
- 	ethernet@1 {
-@@ -75,13 +70,20 @@
- 		#size-cells = <0>;
- 		reg = <0x1>;	/* GEM_ID */
- 		fsl,gemac-bus-id = < 0x1 >;	/* BUS_ID */
--		fsl,gemac-phy-id = < 0x1 >;	/* PHY_ID */
- 		fsl,mdio-mux-val = <0x0>;
- 		phy-mode = "rgmii-txid";
--		fsl,pfe-phy-if-flags = <0x0>;
-+		phy-handle = <&rgmii_phy>;
-+	};
-+	mdio@0 {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		sgmii_phy: ethernet-phy@2 {
-+			reg = <0x2>;
-+		};
- 
--		mdio@0 {
--			reg = <0x0>; /* enabled/disabled */
-+		rgmii_phy: ethernet-phy@1 {
-+			reg = <0x1>;
- 		};
- 	};
- };
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0039-arm64-dts-ls1012a-remove-unused-gemac-bus-id.patch b/target/linux/layerscape/patches-5.4/302-dts-0039-arm64-dts-ls1012a-remove-unused-gemac-bus-id.patch
deleted file mode 100644
index aaac126346..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0039-arm64-dts-ls1012a-remove-unused-gemac-bus-id.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 4ae484235c6b0994e223e802b7fc465ce3b8c4ba Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Thu, 3 Jan 2019 11:07:24 +0530
-Subject: [PATCH] arm64: dts: ls1012a: remove unused gemac-bus-id
-
-gemac-bus-id is unused property and is removed.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts | 2 --
- arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts   | 2 --
- arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts   | 1 -
- arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts    | 2 --
- arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts    | 2 --
- 5 files changed, 9 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
-@@ -57,7 +57,6 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 		reg = <0x0>;	/* GEM_ID */
--		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
- 		fsl,mdio-mux-val = <0x0>;
- 		phy-mode = "sgmii-2500";
- 		phy-handle = <&sgmii_phy1>;
-@@ -68,7 +67,6 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 		reg = <0x1>;	/* GEM_ID */
--		fsl,gemac-bus-id = < 0x0>;	/* BUS_ID */
- 		fsl,mdio-mux-val = <0x0>;
- 		phy-mode = "sgmii-2500";
- 		phy-handle = <&sgmii_phy2>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
-@@ -89,7 +89,6 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 		reg = <0x0>;	/* GEM_ID */
--		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
- 		fsl,mdio-mux-val = <0x0>;
- 		phy-mode = "sgmii";
- 		phy-handle = <&sgmii_phy1>;
-@@ -100,7 +99,6 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 		reg = <0x1>;	/* GEM_ID */
--		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
- 		fsl,mdio-mux-val = <0x0>;
- 		phy-mode = "sgmii";
- 		phy-handle = <&sgmii_phy2>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
-@@ -121,7 +121,6 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 		reg = <0x1>;	/* GEM_ID */
--		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
- 		fsl,mdio-mux-val = <0x0>;
- 		phy-mode = "sgmii";
- 		phy-handle = <&sgmii_phy2>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
-@@ -147,7 +147,6 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 		reg = <0x0>;	/* GEM_ID */
--		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
- 		fsl,mdio-mux-val = <0x2>;
- 		phy-mode = "sgmii-2500";
- 		phy-handle = <&sgmii_phy1>;
-@@ -158,7 +157,6 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 		reg = <0x1>;	/* GEM_ID */
--		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
- 		fsl,mdio-mux-val = <0x3>;
- 		phy-mode = "sgmii-2500";
- 		phy-handle = <&sgmii_phy2>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-@@ -58,7 +58,6 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 		reg = <0x0>;	/* GEM_ID */
--		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
- 		fsl,mdio-mux-val = <0x0>;
- 		phy-mode = "sgmii";
- 		phy-handle = <&sgmii_phy>;
-@@ -69,7 +68,6 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 		reg = <0x1>;	/* GEM_ID */
--		fsl,gemac-bus-id = < 0x1 >;	/* BUS_ID */
- 		fsl,mdio-mux-val = <0x0>;
- 		phy-mode = "rgmii-txid";
- 		phy-handle = <&rgmii_phy>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0040-arm64-dts-ls1012a-reorganize-pfe_mac-nodes.patch b/target/linux/layerscape/patches-5.4/302-dts-0040-arm64-dts-ls1012a-reorganize-pfe_mac-nodes.patch
deleted file mode 100644
index 53e8f186c1..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0040-arm64-dts-ls1012a-reorganize-pfe_mac-nodes.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-From 4ed0fefb58b5788368fea2c69d646ee4f2e9e012 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Mon, 10 Dec 2018 10:03:51 +0530
-Subject: [PATCH] arm64: dts: ls1012a: reorganize pfe_mac nodes
-
-To keep platform specific properties in the platform dts files,
-remove pfe_mac nodes from dtsi and define them in dts files.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts | 4 ++--
- arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts   | 4 ++--
- arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts   | 4 ++--
- arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts    | 4 ++--
- arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts    | 4 ++--
- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi       | 5 -----
- 6 files changed, 10 insertions(+), 15 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
-@@ -52,7 +52,7 @@
- 	#address-cells = <1>;
- 	#size-cells = <0>;
- 
--	ethernet@0 {
-+	pfe_mac0: ethernet@0 {
- 		compatible = "fsl,pfe-gemac-port";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
-@@ -62,7 +62,7 @@
- 		phy-handle = <&sgmii_phy1>;
- 	};
- 
--	ethernet@1 {
-+	pfe_mac1: ethernet@1 {
- 		compatible = "fsl,pfe-gemac-port";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
-@@ -84,7 +84,7 @@
- 	#address-cells = <1>;
- 	#size-cells = <0>;
- 
--	ethernet@0 {
-+	pfe_mac0: ethernet@0 {
- 		compatible = "fsl,pfe-gemac-port";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
-@@ -94,7 +94,7 @@
- 		phy-handle = <&sgmii_phy1>;
- 	};
- 
--	ethernet@1 {
-+	pfe_mac1: ethernet@1 {
- 		compatible = "fsl,pfe-gemac-port";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
-@@ -105,7 +105,7 @@
- 	#address-cells = <1>;
- 	#size-cells = <0>;
- 
--	ethernet@0 {
-+	pfe_mac0: ethernet@0 {
- 		compatible = "fsl,pfe-gemac-port";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
-@@ -116,7 +116,7 @@
- 		phy-handle = <&sgmii_phy1>;
- 	};
- 
--	ethernet@1 {
-+	pfe_mac1: ethernet@1 {
- 		compatible = "fsl,pfe-gemac-port";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
-@@ -142,7 +142,7 @@
- 	#address-cells = <1>;
- 	#size-cells = <0>;
- 
--	ethernet@0 {
-+	pfe_mac0: ethernet@0 {
- 		compatible = "fsl,pfe-gemac-port";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
-@@ -152,7 +152,7 @@
- 		phy-handle = <&sgmii_phy1>;
- 	};
- 
--	ethernet@1 {
-+	pfe_mac1: ethernet@1 {
- 		compatible = "fsl,pfe-gemac-port";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-@@ -53,7 +53,7 @@
- 	#address-cells = <1>;
- 	#size-cells = <0>;
- 
--	ethernet@0 {
-+	pfe_mac0: ethernet@0 {
- 		compatible = "fsl,pfe-gemac-port";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
-@@ -63,7 +63,7 @@
- 		phy-handle = <&sgmii_phy>;
- 	};
- 
--	ethernet@1 {
-+	pfe_mac1: ethernet@1 {
- 		compatible = "fsl,pfe-gemac-port";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-@@ -530,11 +530,6 @@
- 		clock-names = "pfe";
- 
- 		status = "okay";
--		pfe_mac0: ethernet@0 {
--		};
--
--		pfe_mac1: ethernet@1 {
--		};
- 	};
- 
- 	firmware {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0041-sdk-dts-ls104x-drop-smmu-from-the-qds-and-usdpaa-sdk.patch b/target/linux/layerscape/patches-5.4/302-dts-0041-sdk-dts-ls104x-drop-smmu-from-the-qds-and-usdpaa-sdk.patch
deleted file mode 100644
index 8cbb00f0c0..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0041-sdk-dts-ls104x-drop-smmu-from-the-qds-and-usdpaa-sdk.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From 6119ca5f113320d848ead38b141238b013f538c6 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Wed, 23 Jan 2019 16:28:36 +0200
-Subject: [PATCH] sdk: dts: ls104x: drop smmu from the qds and usdpaa sdk dts
-
-Also drop the smmu from the qds and usdpaa versions of the
-SDK device trees because SMMU is supported only for the
-upstream version of the dpaa ethernet drivers.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts    | 14 ++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts | 14 ++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts    | 14 ++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts | 14 ++++++++++++++
- 4 files changed, 56 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts
-@@ -64,6 +64,20 @@
- &soc {
- #include "qoriq-dpaa-eth.dtsi"
- #include "qoriq-fman3-0-6oh.dtsi"
-+
-+pcie@3400000 {
-+       /delete-property/ iommu-map;
-+};
-+
-+pcie@3500000 {
-+       /delete-property/ iommu-map;
-+};
-+
-+pcie@3600000 {
-+       /delete-property/ iommu-map;
-+};
-+
-+/delete-node/ iommu@9000000;
- };
- 
- &fman0 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts
-@@ -92,6 +92,20 @@
- 			fsl,fman-oh-port = <&fman0_oh2>;
- 		};
- 	};
-+
-+	pcie@3400000 {
-+	       /delete-property/ iommu-map;
-+	};
-+
-+	pcie@3500000 {
-+	       /delete-property/ iommu-map;
-+	};
-+
-+	pcie@3600000 {
-+	       /delete-property/ iommu-map;
-+	};
-+
-+	/delete-node/ iommu@9000000;
- };
- / {
- 	reserved-memory {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
-@@ -64,6 +64,20 @@
- &soc {
- #include "qoriq-dpaa-eth.dtsi"
- #include "qoriq-fman3-0-6oh.dtsi"
-+
-+pcie@3400000 {
-+       /delete-property/ iommu-map;
-+};
-+
-+pcie@3500000 {
-+       /delete-property/ iommu-map;
-+};
-+
-+pcie@3600000 {
-+       /delete-property/ iommu-map;
-+};
-+
-+/delete-node/ iommu@9000000;
- };
- 
- &fsldpaa {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts
-@@ -85,6 +85,20 @@
- 			fsl,fman-oh-port = <&fman0_oh2>;
- 		};
- 	};
-+
-+	pcie@3400000 {
-+	       /delete-property/ iommu-map;
-+	};
-+
-+	pcie@3500000 {
-+	       /delete-property/ iommu-map;
-+	};
-+
-+	pcie@3600000 {
-+	       /delete-property/ iommu-map;
-+	};
-+
-+	/delete-node/ iommu@9000000;
- };
- / {
- 	reserved-memory {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0042-arm64-dts-fix-the-LS104x-QDS-mdio-mux-support.patch b/target/linux/layerscape/patches-5.4/302-dts-0042-arm64-dts-fix-the-LS104x-QDS-mdio-mux-support.patch
deleted file mode 100644
index b8d6c27b1e..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0042-arm64-dts-fix-the-LS104x-QDS-mdio-mux-support.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 3c6ae8f4d45701683e671ea34bdddd0bf3e37a4d Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 13 Feb 2019 17:52:00 +0200
-Subject: [PATCH] arm64: dts: fix the LS104x QDS mdio-mux support
-
-Set the "simple-bus" compatible and the fpga ranges in order to
-successfully probe the mdio-mux-emi1.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 3 ++-
- arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 3 ++-
- 2 files changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
-@@ -78,10 +78,11 @@
- 	};
- 
- 	fpga: board-control@2,0 {
--		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
-+		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis", "simple-bus";
- 		reg = <0x2 0x0 0x0000100>;
- 		#address-cells = <1>;
- 		#size-cells = <1>;
-+		ranges = <0 2 0 0x100>;
- 	};
- };
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
-@@ -167,8 +167,9 @@
- 	};
- 
- 	fpga: board-control@2,0 {
--		compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis";
-+		compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-bus";
- 		reg = <0x2 0x0 0x0000100>;
-+		ranges = <0 2 0 0x100>;
- 	};
- };
- 
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0043-arm64-dts-lx2160aqds-Add-mdio-mux-nodes.patch b/target/linux/layerscape/patches-5.4/302-dts-0043-arm64-dts-lx2160aqds-Add-mdio-mux-nodes.patch
deleted file mode 100644
index 9a6b32b548..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0043-arm64-dts-lx2160aqds-Add-mdio-mux-nodes.patch
+++ /dev/null
@@ -1,247 +0,0 @@
-From c9be87f17c64d08c06e4858589a0014f73868867 Mon Sep 17 00:00:00 2001
-From: Pankaj Bansal <pankaj.bansal@nxp.com>
-Date: Thu, 28 Feb 2019 17:28:36 +0530
-Subject: [PATCH] arm64: dts: lx2160aqds: Add mdio mux nodes
-
-The two external MDIO buses used to communicate with phy devices that are
-external to SOC are muxed in LX2160AQDS board.
-These buses can be routed to any one of the eight IO slots on LX2160AQDS
-board depending on value in fpga register 0x54.
-Additionally the external MDIO1 is used to communicate to the onboard
-RGMII phy devices.
-The mdio1 is controlled by bits 4-7 of fpga register and mdio2 is
-controlled by bits 4-7 of fpga register.
-
-Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 145 ++++++++++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts |   8 ++
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi    |  24 ++--
- 3 files changed, 165 insertions(+), 12 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
-@@ -29,6 +29,130 @@
- 		regulator-boot-on;
- 		regulator-always-on;
- 	};
-+
-+	mdio-mux-1 {
-+		compatible = "mdio-mux-multiplexer";
-+		mux-controls = <&mux 0>;
-+		mdio-parent-bus = <&emdio1>;
-+		#address-cells=<1>;
-+		#size-cells = <0>;
-+
-+		mdio@0 { /* On-board PHY #1 RGMI1*/
-+			reg = <0x00>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@8 { /* On-board PHY #2 RGMI2*/
-+			reg = <0x8>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@18 { /* Slot #1 */
-+			reg = <0x18>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@19 { /* Slot #2 */
-+			reg = <0x19>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@1a { /* Slot #3 */
-+			reg = <0x1a>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@1b { /* Slot #4 */
-+			reg = <0x1b>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@1c { /* Slot #5 */
-+			reg = <0x1c>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@1d { /* Slot #6 */
-+			reg = <0x1d>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@1e { /* Slot #7 */
-+			reg = <0x1e>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@1f { /* Slot #8 */
-+			reg = <0x1f>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+	};
-+
-+	mdio-mux-2 {
-+		compatible = "mdio-mux-multiplexer";
-+		mux-controls = <&mux 1>;
-+		mdio-parent-bus = <&emdio2>;
-+		#address-cells=<1>;
-+		#size-cells = <0>;
-+
-+		mdio@0 { /* Slot #1 (secondary EMI) */
-+			reg = <0x00>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@1 { /* Slot #2 (secondary EMI) */
-+			reg = <0x01>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@2 { /* Slot #3 (secondary EMI) */
-+			reg = <0x02>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@3 { /* Slot #4 (secondary EMI) */
-+			reg = <0x03>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@4 { /* Slot #5 (secondary EMI) */
-+			reg = <0x04>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@5 { /* Slot #6 (secondary EMI) */
-+			reg = <0x05>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@6 { /* Slot #7 (secondary EMI) */
-+			reg = <0x06>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio@7 { /* Slot #8 (secondary EMI) */
-+			reg = <0x07>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+	};
- };
- 
- &crypto {
-@@ -71,6 +195,14 @@
- 	};
- };
- 
-+&emdio1 {
-+	status = "okay";
-+};
-+
-+&emdio2 {
-+	status = "okay";
-+};
-+
- &esdhc0 {
- 	status = "okay";
- };
-@@ -82,6 +214,19 @@
- &i2c0 {
- 	status = "okay";
- 
-+	fpga@66 {
-+		compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
-+			     "simple-mfd";
-+		reg = <0x66>;
-+
-+		mux: mux-controller {
-+			compatible = "reg-mux";
-+			#mux-control-cells = <1>;
-+			mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
-+					<0x54 0x07>; /* 1: reg 0x54, bit 2:0 */
-+		};
-+	};
-+
- 	i2c-mux@77 {
- 		compatible = "nxp,pca9547";
- 		reg = <0x77>;
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-@@ -35,6 +35,14 @@
- 	status = "okay";
- };
- 
-+&emdio1 {
-+	status = "okay";
-+};
-+
-+&emdio2 {
-+	status = "okay";
-+};
-+
- &esdhc0 {
- 	sd-uhs-sdr104;
- 	sd-uhs-sdr50;
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -478,26 +478,26 @@
- 			little-endian;
- 		};
- 
--		/* TODO: WRIOP (CCSR?) */
--		emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000, E-MDIO1: 0x1_6000 */
-+		/* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
-+		emdio1: mdio@8b96000 {
- 			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8B96000 0x0 0x1000>;
--			device_type = "mdio";			/* TODO: is this necessary? */
--			little-endian;	/* force the driver in LE mode */
--
--			/* Not necessary on the QDS, but needed on the RDB */
-+			reg = <0x0 0x8b96000 0x0 0x1000>;
-+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- 			#address-cells = <1>;
- 			#size-cells = <0>;
-+			little-endian;	/* force the driver in LE mode */
-+			status = "disabled";
- 		};
- 
--		emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000, E-MDIO2: 0x1_7000 */
-+		/* WRIOP0: 0x8b8_0000, E-MDIO2: 0x1_7000 */
-+		emdio2: mdio@8b97000 {
- 			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8B97000 0x0 0x1000>;
--			device_type = "mdio";			/* TODO: is this necessary? */
--			little-endian;	/* force the driver in LE mode */
--
-+			reg = <0x0 0x8b97000 0x0 0x1000>;
-+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- 			#address-cells = <1>;
- 			#size-cells = <0>;
-+			little-endian;	/* force the driver in LE mode */
-+			status = "disabled";
- 		};
- 
- 		pcs_mdio1: mdio@0x8c07000 {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0044-sdk-arm64-dts-reduce-usdpaa-memory-to-4K-for-LS1046-.patch b/target/linux/layerscape/patches-5.4/302-dts-0044-sdk-arm64-dts-reduce-usdpaa-memory-to-4K-for-LS1046-.patch
deleted file mode 100644
index f8a75d8f84..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0044-sdk-arm64-dts-reduce-usdpaa-memory-to-4K-for-LS1046-.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 97b563d9c0cf09897c1e7b793ef0fe677c66269a Mon Sep 17 00:00:00 2001
-From: Nipun Gupta <nipun.gupta@nxp.com>
-Date: Wed, 30 Jan 2019 19:18:13 +0530
-Subject: [PATCH] sdk: arm64: dts: reduce usdpaa memory to 4K for LS1046/43
-
-This patch reducing the USDPAA reseved memory to 4K.
-In case USDPAA is to be used, 256MB needs to be reserved in the DTS file.
-
-Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts | 9 +++++++--
- arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts | 9 +++++++--
- 2 files changed, 14 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts
-@@ -113,11 +113,16 @@
- 		#size-cells = <2>;
- 		ranges;
- 
-+		/* For legacy usdpaa based use-cases, update the size and
-+		   alignment parameters. e.g. to allocate 256 MB memory:
-+		   size = <0 0x10000000>;
-+		   alignment = <0 0x10000000>;
-+		*/
- 		usdpaa_mem: usdpaa_mem {
- 			compatible = "fsl,usdpaa-mem";
- 			alloc-ranges = <0 0 0x10000 0>;
--			size = <0 0x10000000>;
--			alignment = <0 0x10000000>;
-+			size = <0 0x1000>;
-+			alignment = <0 0x1000>;
- 		};
- 	};
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts
-@@ -106,11 +106,16 @@
- 		#size-cells = <2>;
- 		ranges;
- 
-+		/* For legacy usdpaa based use-cases, update the size and
-+		   alignment parameters. e.g. to allocate 256 MB memory:
-+		   size = <0 0x10000000>;
-+		   alignment = <0 0x10000000>;
-+		*/
- 		usdpaa_mem: usdpaa_mem {
- 			compatible = "fsl,usdpaa-mem";
- 			alloc-ranges = <0 0 0x10000 0>;
--			size = <0 0x10000000>;
--			alignment = <0 0x10000000>;
-+			size = <0 0x1000>;
-+			alignment = <0 0x1000>;
- 		};
- 	};
- };
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0045-arm64-dts-Fix-DWC3-IP-VBUS-glitch-issue-on-Layerscap.patch b/target/linux/layerscape/patches-5.4/302-dts-0045-arm64-dts-Fix-DWC3-IP-VBUS-glitch-issue-on-Layerscap.patch
deleted file mode 100644
index 10eca4a083..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0045-arm64-dts-Fix-DWC3-IP-VBUS-glitch-issue-on-Layerscap.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From 0c7e3f6f557c2a68527980e940e6a605da1f9e12 Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Wed, 16 Jan 2019 15:40:33 +0800
-Subject: [PATCH] arm64: dts: Fix DWC3 IP VBUS glitch issue on Layerscape
- platforms
-
-Cover LS1012A, LS1043A, LS1046A, LS1088A, LS208xA, LX2160A
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 1 +
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++
- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 2 ++
- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 2 ++
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 2 ++
- 6 files changed, 13 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-@@ -443,6 +443,7 @@
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			snps,host-vbus-glitches;
- 		};
- 
- 		sata: sata@3200000 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -713,6 +713,7 @@
- 				usb3-lpm-capable;
- 				snps,dis-u1u2-when-u3-quirk;
- 				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+				snps,host-vbus-glitches;
- 				configure-gfladj;
- 			};
- 
-@@ -726,6 +727,7 @@
- 				usb3-lpm-capable;
- 				snps,dis-u1u2-when-u3-quirk;
- 				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+				snps,host-vbus-glitches;
- 				configure-gfladj;
- 			};
- 
-@@ -739,6 +741,7 @@
- 				usb3-lpm-capable;
- 				snps,dis-u1u2-when-u3-quirk;
- 				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+				snps,host-vbus-glitches;
- 				configure-gfladj;
- 			};
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-@@ -611,6 +611,7 @@
- 				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 				usb3-lpm-capable;
- 				snps,dis-u1u2-when-u3-quirk;
-+				snps,host-vbus-glitches;
- 			};
- 
- 			usb1: usb@3000000 {
-@@ -623,6 +624,7 @@
- 				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 				usb3-lpm-capable;
- 				snps,dis-u1u2-when-u3-quirk;
-+				snps,host-vbus-glitches;
- 			};
- 
- 			usb2: usb@3100000 {
-@@ -635,6 +637,7 @@
- 				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 				usb3-lpm-capable;
- 				snps,dis-u1u2-when-u3-quirk;
-+				snps,host-vbus-glitches;
- 			};
- 
- 			sata: sata@3200000 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-@@ -452,6 +452,7 @@
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			snps,host-vbus-glitches;
- 			status = "disabled";
- 		};
- 
-@@ -463,6 +464,7 @@
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			snps,host-vbus-glitches;
- 			status = "disabled";
- 		};
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-@@ -819,6 +819,7 @@
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			snps,host-vbus-glitches;
- 		};
- 
- 		usb1: usb3@3110000 {
-@@ -830,6 +831,7 @@
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			snps,host-vbus-glitches;
- 		};
- 
- 		serdes1: serdes@1ea0000 {
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -845,6 +845,7 @@
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			snps,host-vbus-glitches;
- 			status = "disabled";
- 		};
- 
-@@ -856,6 +857,7 @@
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			snps,host-vbus-glitches;
- 			status = "disabled";
- 		};
- 
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0046-ARM-dts-Fix-DWC3-IP-VBUS-glitch-issue-on-LS1021A.patch b/target/linux/layerscape/patches-5.4/302-dts-0046-ARM-dts-Fix-DWC3-IP-VBUS-glitch-issue-on-LS1021A.patch
deleted file mode 100644
index e80fe0a45e..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0046-ARM-dts-Fix-DWC3-IP-VBUS-glitch-issue-on-LS1021A.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From 3c1991fe18bca459d07dd78a2268e26008707f00 Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Mon, 25 Feb 2019 13:38:01 +0800
-Subject: [PATCH] ARM: dts: Fix DWC3 IP VBUS glitch issue on LS1021A
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
----
- arch/arm/boot/dts/ls1021a.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/ls1021a.dtsi
-+++ b/arch/arm/boot/dts/ls1021a.dtsi
-@@ -844,6 +844,7 @@
- 			usb3-lpm-capable;
- 			snps,dis-u1u2-when-u3-quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			snps,host-vbus-glitches;
- 		};
- 
- 		pcie@3400000 {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0047-ARM-dts-ls1021aqds-enable-esdhc-controller.patch b/target/linux/layerscape/patches-5.4/302-dts-0047-ARM-dts-ls1021aqds-enable-esdhc-controller.patch
deleted file mode 100644
index 89f393f344..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0047-ARM-dts-ls1021aqds-enable-esdhc-controller.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 6c3655acaa5766efe81f60ac6d428b0d184daa0d Mon Sep 17 00:00:00 2001
-From: Yinbo Zhu <yinbo.zhu@nxp.com>
-Date: Fri, 21 Dec 2018 11:38:44 +0800
-Subject: [PATCH] ARM: dts: ls1021aqds: enable esdhc controller
-
-This patch is to enable esdhc controller in ls1021aqds
-
-Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
----
- arch/arm/boot/dts/ls1021a-qds.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm/boot/dts/ls1021a-qds.dts
-+++ b/arch/arm/boot/dts/ls1021a-qds.dts
-@@ -165,6 +165,10 @@
- 	status = "okay";
- };
- 
-+&esdhc {
-+	status = "okay";
-+};
-+
- &i2c0 {
- 	status = "okay";
- 
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0048-arm64-dts-freescale-lx2160a-add-pcie-EP-mode-DT-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0048-arm64-dts-freescale-lx2160a-add-pcie-EP-mode-DT-node.patch
deleted file mode 100644
index 5a70597457..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0048-arm64-dts-freescale-lx2160a-add-pcie-EP-mode-DT-node.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From 4de7a5e35eff9216fa5e6b138b0ffa75e045e397 Mon Sep 17 00:00:00 2001
-From: Xiaowei Bao <xiaowei.bao@nxp.com>
-Date: Thu, 28 Feb 2019 14:09:01 +0800
-Subject: [PATCH] arm64: dts: freescale: lx2160a: add pcie EP mode DT nodes
-
-The LX2160A PCIe EP mode node.
-
-Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 56 ++++++++++++++++++++++++++
- 1 file changed, 56 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -932,6 +932,15 @@
- 			status = "disabled";
- 		};
- 
-+		pcie_ep@3400000 {
-+			compatible = "fsl,lx2160a-pcie-ep";
-+			reg = <0x00 0x03400000 0x0 0x00100000
-+			       0x80 0x00000000 0x8 0x00000000>;
-+			reg-names = "regs", "addr_space";
-+			num-ob-windows = <256>;
-+			status = "disabled";
-+		};
-+
- 		pcie@3500000 {
- 			compatible = "fsl,lx2160a-pcie";
- 			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
-@@ -959,6 +968,15 @@
- 			status = "disabled";
- 		};
- 
-+		pcie_ep@3500000 {
-+			compatible = "fsl,lx2160a-pcie-ep";
-+			reg = <0x00 0x03500000 0x0 0x00100000
-+			       0x88 0x00000000 0x8 0x00000000>;
-+			reg-names = "regs", "addr_space";
-+			num-ob-windows = <256>;
-+			status = "disabled";
-+		};
-+
- 		pcie@3600000 {
- 			compatible = "fsl,lx2160a-pcie";
- 			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
-@@ -986,6 +1004,16 @@
- 			status = "disabled";
- 		};
- 
-+		pcie_ep@3600000 {
-+			compatible = "fsl,lx2160a-pcie-ep";
-+			reg = <0x00 0x03600000 0x0 0x00100000
-+			       0x90 0x00000000 0x8 0x00000000>;
-+			reg-names = "regs", "addr_space";
-+			num-ob-windows = <256>;
-+			max-functions = <2>;
-+			status = "disabled";
-+		};
-+
- 		pcie@3700000 {
- 			compatible = "fsl,lx2160a-pcie";
- 			reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
-@@ -1013,6 +1041,15 @@
- 			status = "disabled";
- 		};
- 
-+		pcie_ep@3700000 {
-+			compatible = "fsl,lx2160a-pcie-ep";
-+			reg = <0x00 0x03700000 0x0 0x00100000
-+			       0x98 0x00000000 0x8 0x00000000>;
-+			reg-names = "regs", "addr_space";
-+			num-ob-windows = <256>;
-+			status = "disabled";
-+		};
-+
- 		pcie@3800000 {
- 			compatible = "fsl,lx2160a-pcie";
- 			reg = <0x00 0x03800000 0x0 0x00100000   /* controller registers */
-@@ -1040,6 +1077,16 @@
- 			status = "disabled";
- 		};
- 
-+		pcie_ep@3800000 {
-+			compatible = "fsl,lx2160a-pcie-ep";
-+			reg = <0x00 0x03800000 0x0 0x00100000
-+			       0xa0 0x00000000 0x8 0x00000000>;
-+			reg-names = "regs", "addr_space";
-+			num-ob-windows = <256>;
-+			max-functions = <2>;
-+			status = "disabled";
-+		};
-+
- 		pcie@3900000 {
- 			compatible = "fsl,lx2160a-pcie";
- 			reg = <0x00 0x03900000 0x0 0x00100000   /* controller registers */
-@@ -1067,6 +1114,15 @@
- 			status = "disabled";
- 		};
- 
-+		pcie_ep@3900000 {
-+			compatible = "fsl,lx2160a-pcie-ep";
-+			reg = <0x00 0x03900000 0x0 0x00100000
-+			       0xa8 0x00000000 0x8 0x00000000>;
-+			reg-names = "regs", "addr_space";
-+			num-ob-windows = <256>;
-+			status = "disabled";
-+		};
-+
- 		smmu: iommu@5000000 {
- 			compatible = "arm,mmu-500";
- 			reg = <0 0x5000000 0 0x800000>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0049-sdk-dts-ls104x-move-dma-coherent-from-soc-to-its-chi.patch b/target/linux/layerscape/patches-5.4/302-dts-0049-sdk-dts-ls104x-move-dma-coherent-from-soc-to-its-chi.patch
deleted file mode 100644
index 838499ae6e..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0049-sdk-dts-ls104x-move-dma-coherent-from-soc-to-its-chi.patch
+++ /dev/null
@@ -1,879 +0,0 @@
-From 6795bab4281aa9ed8e0ba3fbba06de8dd369b17c Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Thu, 21 Feb 2019 13:32:59 +0800
-Subject: [PATCH] sdk: dts: ls104x move dma-coherent from soc to its child
- nodes
-
-Since SMMU is not supported for SDK version, USB function will down if
-still apply property 'dma-coherent' in scope of soc (USB driver is not
-ready to support it alone) in SDK device trees, decide to remove it.
-And add dma-coherent on other non-USB child nodes under soc.
-
-dma-coherent feature in dts node will cause issue that
-QE-HDLC received too little, when a lot of data is transmitted while
-just little data received, the Tx buffer will run out.
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
----
- .../boot/dts/freescale/fsl-ls1043a-qds-sdk.dts     | 184 ++++++++++++++++++++-
- .../boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts     | 177 ++++++++++++++++++++
- .../boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts  |   4 +
- .../boot/dts/freescale/fsl-ls1046a-qds-sdk.dts     | 175 ++++++++++++++++++++
- .../boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts     | 178 ++++++++++++++++++++
- .../boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts  |   4 +
- 6 files changed, 719 insertions(+), 3 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts
-@@ -62,19 +62,24 @@
- };
- 
- &soc {
-+/delete-property/ dma-coherent;
-+
- #include "qoriq-dpaa-eth.dtsi"
- #include "qoriq-fman3-0-6oh.dtsi"
- 
- pcie@3400000 {
--       /delete-property/ iommu-map;
-+	/delete-property/ iommu-map;
-+	dma-coherent;
- };
- 
- pcie@3500000 {
--       /delete-property/ iommu-map;
-+	/delete-property/ iommu-map;
-+	dma-coherent;
- };
- 
- pcie@3600000 {
--       /delete-property/ iommu-map;
-+	/delete-property/ iommu-map;
-+	dma-coherent;
- };
- 
- /delete-node/ iommu@9000000;
-@@ -82,4 +87,177 @@ pcie@3600000 {
- 
- &fman0 {
- 	compatible = "fsl,fman", "simple-bus";
-+	dma-coherent;
-+};
-+
-+&clockgen {
-+	dma-coherent;
-+};
-+
-+&scfg {
-+	dma-coherent;
-+};
-+
-+&crypto {
-+	dma-coherent;
-+};
-+
-+&dcfg {
-+	dma-coherent;
-+};
-+
-+&ifc {
-+	dma-coherent;
-+};
-+
-+&qspi {
-+	dma-coherent;
-+};
-+
-+&esdhc {
-+	dma-coherent;
-+};
-+
-+&ddr {
-+	dma-coherent;
-+};
-+
-+&tmu {
-+	dma-coherent;
-+};
-+
-+&qman {
-+	dma-coherent;
-+};
-+
-+&bman {
-+	dma-coherent;
-+};
-+
-+&bportals {
-+	dma-coherent;
-+};
-+
-+&qportals {
-+	dma-coherent;
-+};
-+
-+&dspi0 {
-+	dma-coherent;
-+};
-+
-+&dspi1 {
-+	dma-coherent;
-+};
-+
-+&i2c0 {
-+	dma-coherent;
-+};
-+
-+&i2c1 {
-+	dma-coherent;
-+};
-+
-+&i2c2 {
-+	dma-coherent;
-+};
-+
-+&i2c3 {
-+	dma-coherent;
-+};
-+
-+&duart0 {
-+	dma-coherent;
-+};
-+
-+&duart1 {
-+	dma-coherent;
-+};
-+
-+&duart2 {
-+	dma-coherent;
-+};
-+
-+&duart3 {
-+	dma-coherent;
-+};
-+
-+&gpio1 {
-+	dma-coherent;
-+};
-+
-+&gpio2 {
-+	dma-coherent;
-+};
-+
-+&gpio3 {
-+	dma-coherent;
-+};
-+
-+&gpio4 {
-+	dma-coherent;
-+};
-+
-+&uqe {
-+	dma-coherent;
-+};
-+
-+&lpuart0 {
-+	dma-coherent;
-+};
-+
-+&lpuart1 {
-+	dma-coherent;
-+};
-+
-+&lpuart2 {
-+	dma-coherent;
-+};
-+
-+&lpuart3 {
-+	dma-coherent;
-+};
-+
-+&lpuart4 {
-+	dma-coherent;
-+};
-+
-+&lpuart5 {
-+	dma-coherent;
-+};
-+
-+&ftm0 {
-+	dma-coherent;
-+};
-+
-+&wdog0 {
-+	dma-coherent;
-+};
-+
-+&edma0 {
-+	dma-coherent;
-+};
-+
-+&qdma {
-+	dma-coherent;
-+};
-+
-+&msi1 {
-+	dma-coherent;
-+};
-+
-+&msi2 {
-+	dma-coherent;
-+};
-+
-+&msi3 {
-+	dma-coherent;
-+};
-+
-+&ptp_timer0 {
-+	dma-coherent;
-+};
-+
-+&fsldpaa {
-+	dma-coherent;
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts
-@@ -62,19 +62,24 @@
- };
- 
- &soc {
-+/delete-property/ dma-coherent;
-+
- #include "qoriq-dpaa-eth.dtsi"
- #include "qoriq-fman3-0-6oh.dtsi"
- 
- pcie@3400000 {
- 	/delete-property/ iommu-map;
-+	dma-coherent;
- };
- 
- pcie@3500000 {
- 	/delete-property/ iommu-map;
-+	dma-coherent;
- };
- 
- pcie@3600000 {
- 	/delete-property/ iommu-map;
-+	dma-coherent;
- };
- 
- /delete-node/ iommu@9000000;
-@@ -83,3 +88,175 @@ pcie@3600000 {
- &fman0 {
- 	compatible = "fsl,fman", "simple-bus";
- };
-+
-+&clockgen {
-+	dma-coherent;
-+};
-+
-+&scfg {
-+	dma-coherent;
-+};
-+
-+&crypto {
-+	dma-coherent;
-+};
-+
-+&dcfg {
-+	dma-coherent;
-+};
-+
-+&ifc {
-+	dma-coherent;
-+};
-+
-+&qspi {
-+	dma-coherent;
-+};
-+
-+&esdhc {
-+	dma-coherent;
-+};
-+
-+&ddr {
-+	dma-coherent;
-+};
-+
-+&tmu {
-+	dma-coherent;
-+};
-+
-+&qman {
-+	dma-coherent;
-+};
-+
-+&bman {
-+	dma-coherent;
-+};
-+
-+&bportals {
-+	dma-coherent;
-+};
-+
-+&qportals {
-+	dma-coherent;
-+};
-+
-+&dspi0 {
-+	dma-coherent;
-+};
-+
-+&dspi1 {
-+	dma-coherent;
-+};
-+
-+&i2c0 {
-+	dma-coherent;
-+};
-+
-+&i2c1 {
-+	dma-coherent;
-+};
-+
-+&i2c2 {
-+	dma-coherent;
-+};
-+
-+&i2c3 {
-+	dma-coherent;
-+};
-+
-+&duart0 {
-+	dma-coherent;
-+};
-+
-+&duart1 {
-+	dma-coherent;
-+};
-+
-+&duart2 {
-+	dma-coherent;
-+};
-+
-+&duart3 {
-+	dma-coherent;
-+};
-+
-+&gpio1 {
-+	dma-coherent;
-+};
-+
-+&gpio2 {
-+	dma-coherent;
-+};
-+
-+&gpio3 {
-+	dma-coherent;
-+};
-+
-+&gpio4 {
-+	dma-coherent;
-+};
-+
-+&lpuart0 {
-+	dma-coherent;
-+};
-+
-+&lpuart1 {
-+	dma-coherent;
-+};
-+
-+&lpuart2 {
-+	dma-coherent;
-+};
-+
-+&lpuart3 {
-+	dma-coherent;
-+};
-+
-+&lpuart4 {
-+	dma-coherent;
-+};
-+
-+&lpuart5 {
-+	dma-coherent;
-+};
-+
-+&ftm0 {
-+	dma-coherent;
-+};
-+
-+&wdog0 {
-+	dma-coherent;
-+};
-+
-+&edma0 {
-+	dma-coherent;
-+};
-+
-+&qdma {
-+	dma-coherent;
-+};
-+
-+&msi1 {
-+	dma-coherent;
-+};
-+
-+&msi2 {
-+	dma-coherent;
-+};
-+
-+&msi3 {
-+	dma-coherent;
-+};
-+
-+&fman0 {
-+	dma-coherent;
-+};
-+
-+&ptp_timer0 {
-+	dma-coherent;
-+};
-+
-+&fsldpaa {
-+	dma-coherent;
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts
-@@ -16,6 +16,7 @@
- 		fsl,bpid = <7>;
- 		fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
- 		fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
-+		dma-coherent;
- 	};
- 
- 	bp8: buffer-pool@8 {
-@@ -23,6 +24,7 @@
- 		fsl,bpid = <8>;
- 		fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
- 		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
-+		dma-coherent;
- 	};
- 
- 	bp9: buffer-pool@9 {
-@@ -30,10 +32,12 @@
- 		fsl,bpid = <9>;
- 		fsl,bpool-ethernet-cfg = <0 0 0 2048 0 0xfeedabba>;
- 		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
-+		dma-coherent;
- 	};
- 
- 	fsl,dpaa {
- 		compatible = "fsl,ls1043a", "fsl,dpaa", "simple-bus";
-+		dma-coherent;
- 
- 		ethernet@0 {
- 			compatible = "fsl,dpa-ethernet-init";
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
-@@ -62,6 +62,8 @@
- };
- 
- &soc {
-+/delete-property/ dma-coherent;
-+
- #include "qoriq-dpaa-eth.dtsi"
- #include "qoriq-fman3-0-6oh.dtsi"
- 
-@@ -90,4 +92,177 @@ pcie@3600000 {
- 
- &fman0 {
- 	compatible = "fsl,fman", "simple-bus";
-+	dma-coherent;
-+};
-+
-+&clockgen {
-+	dma-coherent;
-+};
-+
-+&scfg {
-+	dma-coherent;
-+};
-+
-+&crypto {
-+	dma-coherent;
-+};
-+
-+&dcfg {
-+	dma-coherent;
-+};
-+
-+&ifc {
-+	dma-coherent;
-+};
-+
-+&qspi {
-+	dma-coherent;
-+};
-+
-+&esdhc {
-+	dma-coherent;
-+};
-+
-+&ddr {
-+	dma-coherent;
-+};
-+
-+&tmu {
-+	dma-coherent;
-+};
-+
-+&qman {
-+	dma-coherent;
-+};
-+
-+&bman {
-+	dma-coherent;
-+};
-+
-+&bportals {
-+	dma-coherent;
-+};
-+
-+&qportals {
-+	dma-coherent;
-+};
-+
-+&dspi {
-+	dma-coherent;
-+};
-+
-+&i2c0 {
-+	dma-coherent;
-+};
-+
-+&i2c1 {
-+	dma-coherent;
-+};
-+
-+&i2c2 {
-+	dma-coherent;
-+};
-+
-+&i2c3 {
-+	dma-coherent;
-+};
-+
-+&duart0 {
-+	dma-coherent;
-+};
-+
-+&duart1 {
-+	dma-coherent;
-+};
-+
-+&duart2 {
-+	dma-coherent;
-+};
-+
-+&duart3 {
-+	dma-coherent;
-+};
-+
-+&gpio0 {
-+	dma-coherent;
-+};
-+
-+&gpio1 {
-+	dma-coherent;
-+};
-+
-+&gpio2 {
-+	dma-coherent;
-+};
-+
-+&gpio3 {
-+	dma-coherent;
-+};
-+
-+&lpuart0 {
-+	dma-coherent;
-+};
-+
-+&lpuart1 {
-+	dma-coherent;
-+};
-+
-+&lpuart2 {
-+	dma-coherent;
-+};
-+
-+&lpuart3 {
-+	dma-coherent;
-+};
-+
-+&lpuart4 {
-+	dma-coherent;
-+};
-+
-+&lpuart5 {
-+	dma-coherent;
-+};
-+
-+&ftm0 {
-+	dma-coherent;
-+};
-+
-+&wdog0 {
-+	dma-coherent;
-+};
-+
-+&edma0 {
-+	dma-coherent;
-+};
-+
-+&sata {
-+	dma-coherent;
-+};
-+
-+&qdma {
-+	dma-coherent;
-+};
-+
-+&msi1 {
-+	dma-coherent;
-+};
-+
-+&msi2 {
-+	dma-coherent;
-+};
-+
-+&msi3 {
-+	dma-coherent;
-+};
-+
-+&ptp_timer0 {
-+	dma-coherent;
-+};
-+
-+&serdes1 {
-+	dma-coherent;
-+};
-+
-+&fsldpaa {
-+	dma-coherent;
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
-@@ -62,6 +62,8 @@
- };
- 
- &soc {
-+/delete-property/ dma-coherent;
-+
- #include "qoriq-dpaa-eth.dtsi"
- #include "qoriq-fman3-0-6oh.dtsi"
- 
-@@ -127,3 +129,179 @@ pcie@3600000 {
-  *	phy-handle = <&pcsphy7>;
-  *};
- */
-+
-+&clockgen {
-+	dma-coherent;
-+};
-+
-+&scfg {
-+	dma-coherent;
-+};
-+
-+&crypto {
-+	dma-coherent;
-+};
-+
-+&dcfg {
-+	dma-coherent;
-+};
-+
-+&ifc {
-+	dma-coherent;
-+};
-+
-+&qspi {
-+	dma-coherent;
-+};
-+
-+&esdhc {
-+	dma-coherent;
-+};
-+
-+&ddr {
-+	dma-coherent;
-+};
-+
-+&tmu {
-+	dma-coherent;
-+};
-+
-+&qman {
-+	dma-coherent;
-+};
-+
-+&bman {
-+	dma-coherent;
-+};
-+
-+&bportals {
-+	dma-coherent;
-+};
-+
-+&qportals {
-+	dma-coherent;
-+};
-+
-+&dspi {
-+	dma-coherent;
-+};
-+
-+&i2c0 {
-+	dma-coherent;
-+};
-+
-+&i2c1 {
-+	dma-coherent;
-+};
-+
-+&i2c2 {
-+	dma-coherent;
-+};
-+
-+&i2c3 {
-+	dma-coherent;
-+};
-+
-+&duart0 {
-+	dma-coherent;
-+};
-+
-+&duart1 {
-+	dma-coherent;
-+};
-+
-+&duart2 {
-+	dma-coherent;
-+};
-+
-+&duart3 {
-+	dma-coherent;
-+};
-+
-+&gpio0 {
-+	dma-coherent;
-+};
-+
-+&gpio1 {
-+	dma-coherent;
-+};
-+
-+&gpio2 {
-+	dma-coherent;
-+};
-+
-+&gpio3 {
-+	dma-coherent;
-+};
-+
-+&lpuart0 {
-+	dma-coherent;
-+};
-+
-+&lpuart1 {
-+	dma-coherent;
-+};
-+
-+&lpuart2 {
-+	dma-coherent;
-+};
-+
-+&lpuart3 {
-+	dma-coherent;
-+};
-+
-+&lpuart4 {
-+	dma-coherent;
-+};
-+
-+&lpuart5 {
-+	dma-coherent;
-+};
-+
-+&ftm0 {
-+	dma-coherent;
-+};
-+
-+&wdog0 {
-+	dma-coherent;
-+};
-+
-+&edma0 {
-+	dma-coherent;
-+};
-+
-+&sata {
-+	dma-coherent;
-+};
-+
-+&qdma {
-+	dma-coherent;
-+};
-+
-+&msi1 {
-+	dma-coherent;
-+};
-+
-+&msi2 {
-+	dma-coherent;
-+};
-+
-+&msi3 {
-+	dma-coherent;
-+};
-+
-+&fman0 {
-+	dma-coherent;
-+};
-+
-+&ptp_timer0 {
-+	dma-coherent;
-+};
-+
-+&serdes1 {
-+	dma-coherent;
-+};
-+
-+&fsldpaa {
-+	dma-coherent;
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts
-@@ -16,6 +16,7 @@
- 		fsl,bpid = <7>;
- 		fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
- 		fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
-+		dma-coherent;
- 	};
- 
- 	bp8: buffer-pool@8 {
-@@ -23,6 +24,7 @@
- 		fsl,bpid = <8>;
- 		fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
- 		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
-+		dma-coherent;
- 	};
- 
- 	bp9: buffer-pool@9 {
-@@ -30,10 +32,12 @@
- 		fsl,bpid = <9>;
- 		fsl,bpool-ethernet-cfg = <0 0 0 2048 0 0xfeedabba>;
- 		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
-+		dma-coherent;
- 	};
- 
- 	fsl,dpaa {
- 		compatible = "fsl,ls1046a", "fsl,dpaa", "simple-bus";
-+		dma-coherent;
- 
- 		ethernet@2 {
- 			compatible = "fsl,dpa-ethernet-init";
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0050-arm64-dts-lx2160a-add-interrupt-property-for-aquanti.patch b/target/linux/layerscape/patches-5.4/302-dts-0050-arm64-dts-lx2160a-add-interrupt-property-for-aquanti.patch
deleted file mode 100644
index 7725311740..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0050-arm64-dts-lx2160a-add-interrupt-property-for-aquanti.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From e260d97c7875d5ef6aca11e49bf2784966a877c2 Mon Sep 17 00:00:00 2001
-From: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
-Date: Thu, 4 Apr 2019 17:44:46 +0300
-Subject: [PATCH] arm64: dts: lx2160a: add interrupt property for aquantia phy
-
-Add interrupt property for Aquantia AQR107 ethernet phy, currently
-working in polling mode.
-
-Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-@@ -184,14 +184,14 @@
- 	aquantia_phy1: ethernet-phy@4 {
- 		/* AQR107 PHY - "compatible" property not strictly needed */
- 		compatible = "ethernet-phy-ieee802.3-c45";
-+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- 		reg = <0x4>;
--		/* Poll mode - no "interrupts" property defined */
- 	};
- 	aquantia_phy2: ethernet-phy@5 {
- 		/* AQR107 PHY - "compatible" property not strictly needed */
- 		compatible = "ethernet-phy-ieee802.3-c45";
-+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- 		reg = <0x5>;
--		/* Poll mode - no "interrupts" property defined */
- 	};
- };
- 
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0051-arm64-dts-fsl-layerscape-fix-warnings-when-compiling.patch b/target/linux/layerscape/patches-5.4/302-dts-0051-arm64-dts-fsl-layerscape-fix-warnings-when-compiling.patch
deleted file mode 100644
index 7ac2f3166b..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0051-arm64-dts-fsl-layerscape-fix-warnings-when-compiling.patch
+++ /dev/null
@@ -1,292 +0,0 @@
-From d949248dccef18f7257d8de0adfd67244955e7b7 Mon Sep 17 00:00:00 2001
-From: Pankaj Bansal <pankaj.bansal@nxp.com>
-Date: Mon, 22 Apr 2019 16:22:49 +0530
-Subject: [PATCH] arm64: dts: fsl: layerscape: fix warnings when compiling dts
- files
-
-when compiling dts file using DTC_FLAG='-@', the device tree compiler
-reports these warnings:
-
-Warning (simple_bus_reg): /soc/mdio@0x8c0b000: simple-bus unit address
-format error, expected "8c0b000"
-Warning (unit_address_format): /pfe@04000000: unit name should not have
-leading 0s
-
-Fixed the node names to silence these warnings.
-
-Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi |  3 ++-
- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 14 +++++++-------
- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 22 +++++++++++-----------
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 18 +++++++++---------
- 4 files changed, 29 insertions(+), 28 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-@@ -3,6 +3,7 @@
-  * Device Tree Include file for Freescale Layerscape-1012A family SoC.
-  *
-  * Copyright 2016 Freescale Semiconductor, Inc.
-+ * Copyright 2019 NXP
-  *
-  */
- 
-@@ -514,7 +515,7 @@
- 		};
- 	};
- 
--	pfe: pfe@04000000 {
-+	pfe: pfe@4000000 {
- 		compatible = "fsl,pfe";
- 		reg =   <0x0 0x04000000 0x0 0xc00000>,	/* AXI 16M */
- 			<0x0 0x83400000 0x0 0xc00000>;  /* PFE DDR 12M */
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-@@ -2,7 +2,7 @@
- /*
-  * Device Tree Include file for NXP Layerscape-1088A family SoC.
-  *
-- * Copyright 2017 NXP
-+ * Copyright 2017-2019 NXP
-  *
-  * Harninder Rai <harninder.rai@nxp.com>
-  *
-@@ -310,7 +310,7 @@
- 		};
- 
- 		/* TODO: WRIOP (CCSR?) */
--		emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000,
-+		emdio1: mdio@8B96000 { /* WRIOP0: 0x8B8_0000,
- 					  * E-MDIO1: 0x1_6000
- 					  */
- 			compatible = "fsl,fman-memac-mdio";
-@@ -323,7 +323,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000,
-+		emdio2: mdio@8B97000 { /* WRIOP0: 0x8B8_0000,
- 					  * E-MDIO2: 0x1_7000
- 					  */
- 			compatible = "fsl,fman-memac-mdio";
-@@ -335,7 +335,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio1: mdio@0x8c07000 {
-+		pcs_mdio1: mdio@8c07000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c07000 0x0 0x1000>;
- 			device_type = "mdio";
-@@ -345,7 +345,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio2: mdio@0x8c0b000 {
-+		pcs_mdio2: mdio@8c0b000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c0b000 0x0 0x1000>;
- 			device_type = "mdio";
-@@ -355,7 +355,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio3: mdio@0x8c0f000 {
-+		pcs_mdio3: mdio@8c0f000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c0f000 0x0 0x1000>;
- 			device_type = "mdio";
-@@ -365,7 +365,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio4: mdio@0x8c13000 {
-+		pcs_mdio4: mdio@8c13000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c13000 0x0 0x1000>;
- 			device_type = "mdio";
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-@@ -3,7 +3,7 @@
-  * Device Tree Include file for Freescale Layerscape-2080A family SoC.
-  *
-  * Copyright 2016 Freescale Semiconductor, Inc.
-- * Copyright 2017 NXP
-+ * Copyright 2017-2019 NXP
-  *
-  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
-  *
-@@ -524,7 +524,7 @@
- 		};
- 
- 		/* TODO: WRIOP (CCSR?) */
--		emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000,
-+		emdio1: mdio@8B96000 { /* WRIOP0: 0x8B8_0000,
- 					  * E-MDIO1: 0x1_6000
- 					  */
- 			compatible = "fsl,fman-memac-mdio";
-@@ -537,7 +537,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000,
-+		emdio2: mdio@8B97000 { /* WRIOP0: 0x8B8_0000,
- 					  * E-MDIO2: 0x1_7000
- 					  */
- 			compatible = "fsl,fman-memac-mdio";
-@@ -549,7 +549,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio1: mdio@0x8c07000 {
-+		pcs_mdio1: mdio@8c07000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c07000 0x0 0x1000>;
- 			device_type = "mdio";
-@@ -559,7 +559,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio2: mdio@0x8c0b000 {
-+		pcs_mdio2: mdio@8c0b000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c0b000 0x0 0x1000>;
- 			device_type = "mdio";
-@@ -569,7 +569,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio3: mdio@0x8c0f000 {
-+		pcs_mdio3: mdio@8c0f000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c0f000 0x0 0x1000>;
- 			device_type = "mdio";
-@@ -579,7 +579,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio4: mdio@0x8c13000 {
-+		pcs_mdio4: mdio@8c13000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c13000 0x0 0x1000>;
- 			device_type = "mdio";
-@@ -589,7 +589,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio5: mdio@0x8c17000 {
-+		pcs_mdio5: mdio@8c17000 {
- 			status = "disabled";
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c17000 0x0 0x1000>;
-@@ -600,7 +600,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio6: mdio@0x8c1b000 {
-+		pcs_mdio6: mdio@8c1b000 {
- 			status = "disabled";
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c1b000 0x0 0x1000>;
-@@ -611,7 +611,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio7: mdio@0x8c1f000 {
-+		pcs_mdio7: mdio@8c1f000 {
- 			status = "disabled";
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c1f000 0x0 0x1000>;
-@@ -622,7 +622,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio8: mdio@0x8c23000 {
-+		pcs_mdio8: mdio@8c23000 {
- 			status = "disabled";
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c23000 0x0 0x1000>;
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -2,7 +2,7 @@
- //
- // Device Tree Include file for Layerscape-LX2160A family SoC.
- //
--// Copyright 2018 NXP
-+// Copyright 2018-2019 NXP
- 
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
-@@ -500,7 +500,7 @@
- 			status = "disabled";
- 		};
- 
--		pcs_mdio1: mdio@0x8c07000 {
-+		pcs_mdio1: mdio@8c07000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c07000 0x0 0x1000>;
- 			device_type = "mdio";
-@@ -510,7 +510,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio2: mdio@0x8c0b000 {
-+		pcs_mdio2: mdio@8c0b000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c0b000 0x0 0x1000>;
- 			device_type = "mdio";
-@@ -520,7 +520,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio3: mdio@0x8c0f000 {
-+		pcs_mdio3: mdio@8c0f000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c0f000 0x0 0x1000>;
- 			device_type = "mdio";
-@@ -530,7 +530,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio4: mdio@0x8c13000 {
-+		pcs_mdio4: mdio@8c13000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c13000 0x0 0x1000>;
- 			device_type = "mdio";
-@@ -540,7 +540,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio5: mdio@0x8c17000 {
-+		pcs_mdio5: mdio@8c17000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c17000 0x0 0x1000>;
- 			device_type = "mdio";
-@@ -550,7 +550,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio6: mdio@0x8c1b000 {
-+		pcs_mdio6: mdio@8c1b000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c1b000 0x0 0x1000>;
- 			device_type = "mdio";
-@@ -560,7 +560,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio7: mdio@0x8c1f000 {
-+		pcs_mdio7: mdio@8c1f000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c1f000 0x0 0x1000>;
- 			device_type = "mdio";
-@@ -570,7 +570,7 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio8: mdio@0x8c23000 {
-+		pcs_mdio8: mdio@8c23000 {
- 			compatible = "fsl,fman-memac-mdio";
- 			reg = <0x0 0x8c23000 0x0 0x1000>;
- 			device_type = "mdio";
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0052-arm64-dts-fsl-layerscape-fix-warnings-when-compiling.patch b/target/linux/layerscape/patches-5.4/302-dts-0052-arm64-dts-fsl-layerscape-fix-warnings-when-compiling.patch
deleted file mode 100644
index bfe9ce6a45..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0052-arm64-dts-fsl-layerscape-fix-warnings-when-compiling.patch
+++ /dev/null
@@ -1,114 +0,0 @@
-From 92aff696c8708ff5293eb000e98456e23afe1cb3 Mon Sep 17 00:00:00 2001
-From: Pankaj Bansal <pankaj.bansal@nxp.com>
-Date: Mon, 22 Apr 2019 16:43:13 +0530
-Subject: [PATCH] arm64: dts: fsl: layerscape: fix warnings when compiling dts
- files
-
-when compiling dts file using DTC_FLAG='-@', the device tree compiler
-reports these warnings:
-
-Warning (alias_paths): /aliases: aliases property name must include
-only lowercase and '-'
-
-Fixed the node aliases to silence these warnings.
-
-Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 34 +++++++++++------------
- arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 28 +++++++++----------
- 2 files changed, 31 insertions(+), 31 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
-@@ -3,7 +3,7 @@
-  * Device Tree Include file for Freescale Layerscape-1043A family SoC.
-  *
-  * Copyright 2014-2015 Freescale Semiconductor, Inc.
-- * Copyright 2018 NXP
-+ * Copyright 2018-2019 NXP
-  *
-  * Mingkai Hu <Mingkai.hu@freescale.com>
-  */
-@@ -24,22 +24,22 @@
- 		serial1 = &duart1;
- 		serial2 = &duart2;
- 		serial3 = &duart3;
--		sgmii_riser_s1_p1 = &sgmii_phy_s1_p1;
--		sgmii_riser_s2_p1 = &sgmii_phy_s2_p1;
--		sgmii_riser_s3_p1 = &sgmii_phy_s3_p1;
--		sgmii_riser_s4_p1 = &sgmii_phy_s4_p1;
--		qsgmii_s1_p1 = &qsgmii_phy_s1_p1;
--		qsgmii_s1_p2 = &qsgmii_phy_s1_p2;
--		qsgmii_s1_p3 = &qsgmii_phy_s1_p3;
--		qsgmii_s1_p4 = &qsgmii_phy_s1_p4;
--		qsgmii_s2_p1 = &qsgmii_phy_s2_p1;
--		qsgmii_s2_p2 = &qsgmii_phy_s2_p2;
--		qsgmii_s2_p3 = &qsgmii_phy_s2_p3;
--		qsgmii_s2_p4 = &qsgmii_phy_s2_p4;
--		emi1_slot1 = &ls1043mdio_s1;
--		emi1_slot2 = &ls1043mdio_s2;
--		emi1_slot3 = &ls1043mdio_s3;
--		emi1_slot4 = &ls1043mdio_s4;
-+		sgmii-riser-s1-p1 = &sgmii_phy_s1_p1;
-+		sgmii-riser-s2-p1 = &sgmii_phy_s2_p1;
-+		sgmii-riser-s3-p1 = &sgmii_phy_s3_p1;
-+		sgmii-riser-s4-p1 = &sgmii_phy_s4_p1;
-+		qsgmii-s1-p1 = &qsgmii_phy_s1_p1;
-+		qsgmii-s1-p2 = &qsgmii_phy_s1_p2;
-+		qsgmii-s1-p3 = &qsgmii_phy_s1_p3;
-+		qsgmii-s1-p4 = &qsgmii_phy_s1_p4;
-+		qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
-+		qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
-+		qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
-+		qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
-+		emi1-slot1 = &ls1043mdio_s1;
-+		emi1-slot2 = &ls1043mdio_s2;
-+		emi1-slot3 = &ls1043mdio_s3;
-+		emi1-slot4 = &ls1043mdio_s4;
- 	};
- 
- 	chosen {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
-@@ -3,7 +3,7 @@
-  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
-  *
-  * Copyright 2016 Freescale Semiconductor, Inc.
-- * Copyright 2018 NXP
-+ * Copyright 2018-2019 NXP
-  *
-  * Shaohui Xie <Shaohui.Xie@nxp.com>
-  */
-@@ -26,19 +26,19 @@
- 		serial2 = &duart2;
- 		serial3 = &duart3;
- 
--		emi1_slot1 = &ls1046mdio_s1;
--		emi1_slot2 = &ls1046mdio_s2;
--		emi1_slot4 = &ls1046mdio_s4;
--
--		sgmii_s1_p1 = &sgmii_phy_s1_p1;
--		sgmii_s1_p2 = &sgmii_phy_s1_p2;
--		sgmii_s1_p3 = &sgmii_phy_s1_p3;
--		sgmii_s1_p4 = &sgmii_phy_s1_p4;
--		sgmii_s4_p1 = &sgmii_phy_s4_p1;
--		qsgmii_s2_p1 = &qsgmii_phy_s2_p1;
--		qsgmii_s2_p2 = &qsgmii_phy_s2_p2;
--		qsgmii_s2_p3 = &qsgmii_phy_s2_p3;
--		qsgmii_s2_p4 = &qsgmii_phy_s2_p4;
-+		emi1-slot1 = &ls1046mdio_s1;
-+		emi1-slot2 = &ls1046mdio_s2;
-+		emi1-slot4 = &ls1046mdio_s4;
-+
-+		sgmii-s1-p1 = &sgmii_phy_s1_p1;
-+		sgmii-s1-p2 = &sgmii_phy_s1_p2;
-+		sgmii-s1-p3 = &sgmii_phy_s1_p3;
-+		sgmii-s1-p4 = &sgmii_phy_s1_p4;
-+		sgmii-s4-p1 = &sgmii_phy_s4_p1;
-+		qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
-+		qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
-+		qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
-+		qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
- 	};
- 
- 	chosen {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0053-sdk-arm64-dts-nxp-add-DPAA1-SDK-flavor-dts-files.patch b/target/linux/layerscape/patches-5.4/302-dts-0053-sdk-arm64-dts-nxp-add-DPAA1-SDK-flavor-dts-files.patch
deleted file mode 100644
index 1e1b805ffb..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0053-sdk-arm64-dts-nxp-add-DPAA1-SDK-flavor-dts-files.patch
+++ /dev/null
@@ -1,187 +0,0 @@
-From 13fdde4dfdccd567ae459db6e439a53496732748 Mon Sep 17 00:00:00 2001
-From: Pramod Kumar <pramod.kumar_1@nxp.com>
-Date: Wed, 8 May 2019 18:25:16 +0530
-Subject: [PATCH] sdk: arm64: dts: nxp: add DPAA1 SDK flavor dts files
-
-dts fsl-ls1046a-frwy-sdk.dts which enables sdk specific entries
-dts fsl-ls1046a-frwy-usdpaa.dts which enables dpdk
-
-Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
-Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
----
- arch/arm64/boot/dts/freescale/Makefile             |  2 +
- .../boot/dts/freescale/fsl-ls1046a-frwy-sdk.dts    | 53 ++++++++++++
- .../boot/dts/freescale/fsl-ls1046a-frwy-usdpaa.dts | 99 ++++++++++++++++++++++
- 3 files changed, 154 insertions(+)
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-sdk.dts
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-usdpaa.dts
-
---- a/arch/arm64/boot/dts/freescale/Makefile
-+++ b/arch/arm64/boot/dts/freescale/Makefile
-@@ -13,6 +13,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb-sdk.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb-usdpaa.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy-sdk.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy-usdpaa.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds-sdk.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-sdk.dts
-@@ -0,0 +1,53 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
-+ *
-+ * Copyright 2019 NXP.
-+ *
-+ */
-+
-+#include "fsl-ls1046a-frwy.dts"
-+#include "qoriq-qman-portals-sdk.dtsi"
-+#include "qoriq-bman-portals-sdk.dtsi"
-+
-+&bman_fbpr {
-+	compatible = "fsl,bman-fbpr";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+&qman_fqd {
-+	compatible = "fsl,qman-fqd";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+&qman_pfdr {
-+	compatible = "fsl,qman-pfdr";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+
-+&soc {
-+#include "qoriq-dpaa-eth.dtsi"
-+#include "qoriq-fman3-0-6oh.dtsi"
-+};
-+
-+&fsldpaa {
-+	ethernet@1 {
-+		status = "disabled";
-+	};
-+	ethernet@2 {
-+		status = "disabled";
-+	};
-+	ethernet@3 {
-+		status = "disabled";
-+	};
-+	ethernet@6 {
-+		status = "disabled";
-+	};
-+	ethernet@9 {
-+		compatible = "fsl,dpa-ethernet";
-+		fsl,fman-mac = <&enet7>;
-+		dma-coherent;
-+	};
-+};
-+
-+&fman0 {
-+	compatible = "fsl,fman", "simple-bus";
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-usdpaa.dts
-@@ -0,0 +1,99 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
-+ *
-+ * Copyright 2019 NXP.
-+ *
-+ */
-+
-+#include "fsl-ls1046a-frwy-sdk.dts"
-+
-+&soc {
-+	bp7: buffer-pool@7 {
-+		compatible = "fsl,ls1046a-bpool", "fsl,bpool";
-+		fsl,bpid = <7>;
-+		fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
-+		fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
-+	};
-+
-+	bp8: buffer-pool@8 {
-+		compatible = "fsl,ls1046a-bpool", "fsl,bpool";
-+		fsl,bpid = <8>;
-+		fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
-+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
-+	};
-+
-+	bp9: buffer-pool@9 {
-+		compatible = "fsl,ls1046a-bpool", "fsl,bpool";
-+		fsl,bpid = <9>;
-+		fsl,bpool-ethernet-cfg = <0 0 0 2048 0 0xfeedabba>;
-+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
-+	};
-+
-+	fsl,dpaa {
-+		compatible = "fsl,ls1046a", "fsl,dpaa", "simple-bus";
-+
-+		ethernet@0 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x50 1 0x51 1>;
-+			fsl,qman-frame-queues-tx = <0x70 1 0x71 1>;
-+		};
-+
-+		ethernet@4 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x52 1 0x53 1>;
-+			fsl,qman-frame-queues-tx = <0x72 1 0x73 1>;
-+		};
-+
-+		ethernet@5 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x54 1 0x55 1>;
-+			fsl,qman-frame-queues-tx = <0x74 1 0x75 1>;
-+		};
-+
-+		ethernet@9 {
-+			compatible = "fsl,dpa-ethernet-init";
-+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-+			fsl,qman-frame-queues-rx = <0x56 1 0x57 1>;
-+			fsl,qman-frame-queues-tx = <0x76 1 0x77 1>;
-+		};
-+
-+		dpa-fman0-oh@2 {
-+			compatible = "fsl,dpa-oh";
-+			/* Define frame queues for the OH port*/
-+			/* <OH Rx error, OH Rx default> */
-+			fsl,qman-frame-queues-oh = <0x60 1 0x61 1>;
-+			fsl,fman-oh-port = <&fman0_oh2>;
-+		};
-+	};
-+};
-+/ {
-+	reserved-memory {
-+		#address-cells = <2>;
-+		#size-cells = <2>;
-+		ranges;
-+		/* For legacy usdpaa based use-cases, update the size and
-+		   alignment parameters. e.g. to allocate 256 MB memory:
-+		   size = <0 0x10000000>;
-+		   alignment = <0 0x10000000>;
-+		*/
-+
-+		usdpaa_mem: usdpaa_mem {
-+			compatible = "fsl,usdpaa-mem";
-+			alloc-ranges = <0 0 0x10000 0>;
-+			size = <0 0x1000>;
-+			alignment = <0 0x1000>;
-+		};
-+	};
-+};
-+
-+&fman0 {
-+	fman0_oh2: port@83000 {
-+		cell-index = <1>;
-+		compatible = "fsl,fman-port-oh";
-+		reg = <0x83000 0x1000>;
-+	};
-+};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0054-arm64-dts-nxp-frwy-ls1046a-add-support-for-micron-no.patch b/target/linux/layerscape/patches-5.4/302-dts-0054-arm64-dts-nxp-frwy-ls1046a-add-support-for-micron-no.patch
deleted file mode 100644
index 7050dd3764..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0054-arm64-dts-nxp-frwy-ls1046a-add-support-for-micron-no.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 3c013ab682fe1e6ca0473141f03f26e2f47980ad Mon Sep 17 00:00:00 2001
-From: Pramod Kumar <pramod.kumar_1@nxp.com>
-Date: Fri, 10 May 2019 14:33:37 +0530
-Subject: [PATCH] arm64: dts: nxp: frwy-ls1046a: add support for micron nor
- flash
-
-add micron nor flash support for ls1046a frwy board.
-
-Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
-Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
-@@ -106,6 +106,23 @@
- 
- };
- 
-+
-+&qspi {
-+	num-cs = <1>;
-+	bus-num = <0>;
-+	status = "okay";
-+
-+	qflash0: flash@0 {
-+		compatible = "jedec,spi-nor";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-max-frequency = <50000000>;
-+		reg = <0>;
-+		spi-rx-bus-width = <4>;
-+		spi-tx-bus-width = <4>;
-+	};
-+};
-+
- #include "fsl-ls1046-post.dtsi"
- 
- &fman0 {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0055-arm64-dts-ls1028a-Add-PCIe-controller-DT-nodes.patch b/target/linux/layerscape/patches-5.4/302-dts-0055-arm64-dts-ls1028a-Add-PCIe-controller-DT-nodes.patch
deleted file mode 100644
index 2543c879a9..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0055-arm64-dts-ls1028a-Add-PCIe-controller-DT-nodes.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 25291f86f449c4488a0a46b1e6b3ce3b83dbf1f9 Mon Sep 17 00:00:00 2001
-From: Xiaowei Bao <xiaowei.bao@nxp.com>
-Date: Wed, 15 May 2019 10:14:30 +0800
-Subject: [PATCH] arm64: dts: ls1028a: Add PCIe controller DT nodes
-
-LS1028a implements 2 PCIe 3.0 controllers.
-
-Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 50 ++++++++++++++++++++++++++
- 1 file changed, 50 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -649,6 +649,56 @@
- 			};
- 		};
- 
-+		pcie@3400000 {
-+			compatible = "fsl,ls1028a-pcie";
-+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
-+			       0x80 0x00000000 0x0 0x00002000>; /* configuration space */
-+			reg-names = "regs", "config";
-+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
-+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
-+			interrupt-names = "pme", "aer";
-+			#address-cells = <3>;
-+			#size-cells = <2>;
-+			device_type = "pci";
-+			dma-coherent;
-+			bus-range = <0x0 0xff>;
-+			ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000   /* downstream I/O */
-+				  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-+			msi-parent = <&its>;
-+			#interrupt-cells = <1>;
-+			interrupt-map-mask = <0 0 0 7>;
-+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 3 &gic GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 4 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
-+		pcie@3500000 {
-+			compatible = "fsl,ls1028a-pcie";
-+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
-+			       0x88 0x00000000 0x0 0x00002000>; /* configuration space */
-+			reg-names = "regs", "config";
-+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "pme", "aer";
-+			#address-cells = <3>;
-+			#size-cells = <2>;
-+			device_type = "pci";
-+			dma-coherent;
-+			bus-range = <0x0 0xff>;
-+			ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000   /* downstream I/O */
-+				  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-+			msi-parent = <&its>;
-+			#interrupt-cells = <1>;
-+			interrupt-map-mask = <0 0 0 7>;
-+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 2 &gic GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 3 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 4 &gic GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
- 		pcie@1f0000000 { /* Integrated Endpoint Root Complex */
- 			compatible = "pci-host-ecam-generic";
- 			reg = <0x01 0xf0000000 0x0 0x100000>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0056-arm64-dts-lx2160a-Enable-usb3-lpm-capable-for-usb3-n.patch b/target/linux/layerscape/patches-5.4/302-dts-0056-arm64-dts-lx2160a-Enable-usb3-lpm-capable-for-usb3-n.patch
deleted file mode 100644
index 1f8a9e6630..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0056-arm64-dts-lx2160a-Enable-usb3-lpm-capable-for-usb3-n.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 74f9f7ee3f4b2e88bd29e7ac3dbc6a8ffe2e97f9 Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Wed, 15 May 2019 13:33:49 +0800
-Subject: [PATCH] arm64: dts: lx2160a: Enable usb3-lpm-capable for usb3 node
-
-Enable USB3 HW LPM feature for lx2160a and active patch for
-snps erratum A-010131. It will disable U1/U2 temperary when
-initiate U3 request.
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -843,6 +843,8 @@
- 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- 			dr_mode = "host";
- 			snps,quirk-frame-length-adjustment = <0x20>;
-+			usb3-lpm-capable;
-+			snps,dis-u1u2-when-u3-quirk;
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 			snps,host-vbus-glitches;
-@@ -855,6 +857,8 @@
- 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- 			dr_mode = "host";
- 			snps,quirk-frame-length-adjustment = <0x20>;
-+			usb3-lpm-capable;
-+			snps,dis-u1u2-when-u3-quirk;
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 			snps,host-vbus-glitches;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0057-arm64-dts-fsl-lx2160a-add-flexcan-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0057-arm64-dts-fsl-lx2160a-add-flexcan-node.patch
deleted file mode 100644
index c85139f216..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0057-arm64-dts-fsl-lx2160a-add-flexcan-node.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From c2046901f933b0e1c87c5cbdab4ba27a3b66317e Mon Sep 17 00:00:00 2001
-From: Pankaj Bansal <pankaj.bansal@nxp.com>
-Date: Wed, 8 May 2019 17:49:14 +0530
-Subject: [PATCH] arm64: dts: fsl: lx2160a: add flexcan node
-
-Add flexcan node in LX2160A SOC file as well as in QDS and RDB files.
-The device tree bindings used can be referred from
-Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
-
-Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 10 +++++++++-
- arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 18 +++++++++++++++++-
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi    | 18 ++++++++++++++++++
- 3 files changed, 44 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
-@@ -2,7 +2,7 @@
- //
- // Device Tree file for LX2160AQDS
- //
--// Copyright 2018 NXP
-+// Copyright 2018-2019 NXP
- 
- /dts-v1/;
- 
-@@ -155,6 +155,14 @@
- 	};
- };
- 
-+&can0 {
-+	status = "okay";
-+};
-+
-+&can1 {
-+	status = "okay";
-+};
-+
- &crypto {
- 	status = "okay";
- };
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-@@ -2,7 +2,7 @@
- //
- // Device Tree file for LX2160ARDB
- //
--// Copyright 2018 NXP
-+// Copyright 2018-2019 NXP
- 
- /dts-v1/;
- 
-@@ -31,6 +31,22 @@
- 	};
- };
- 
-+&can0 {
-+	status = "okay";
-+
-+	can-transceiver {
-+		max-bitrate = <5000000>;
-+	};
-+};
-+
-+&can1 {
-+	status = "okay";
-+
-+	can-transceiver {
-+		max-bitrate = <5000000>;
-+	};
-+};
-+
- &crypto {
- 	status = "okay";
- };
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -753,6 +753,24 @@
- 			status = "disabled";
- 		};
- 
-+		can0: can@2180000 {
-+			compatible = "fsl,lx2160ar1-flexcan";
-+			reg = <0x0 0x2180000 0x0 0x10000>;
-+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&sysclk>, <&clockgen 4 7>;
-+			clock-names = "ipg", "per";
-+			status = "disabled";
-+		};
-+
-+		can1: can@2190000 {
-+			compatible = "fsl,lx2160ar1-flexcan";
-+			reg = <0x0 0x2190000 0x0 0x10000>;
-+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&sysclk>, <&clockgen 4 7>;
-+			clock-names = "ipg", "per";
-+			status = "disabled";
-+		};
-+
- 		uart0: serial@21c0000 {
- 			compatible = "arm,sbsa-uart","arm,pl011";
- 			reg = <0x0 0x21c0000 0x0 0x1000>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0058-arm64-dts-fsl-ls1028a-add-flexcan-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0058-arm64-dts-fsl-ls1028a-add-flexcan-node.patch
deleted file mode 100644
index 8ca0801422..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0058-arm64-dts-fsl-ls1028a-add-flexcan-node.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 3724107421d95c5a46b19b950b04de2a05c1f757 Mon Sep 17 00:00:00 2001
-From: Pankaj Bansal <pankaj.bansal@nxp.com>
-Date: Wed, 8 May 2019 17:49:14 +0530
-Subject: [PATCH] arm64: dts: fsl: ls1028a: add flexcan node
-
-Add flexcan node in LS1028A SOC file as well as in QDS and RDB files.
-The device tree bindings used can be referred from
-Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
-
-Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 10 +++++++++-
- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 18 +++++++++++++++++-
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi    | 22 +++++++++++++++++++++-
- 3 files changed, 47 insertions(+), 3 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-@@ -2,7 +2,7 @@
- /*
-  * Device Tree file for NXP LS1028A QDS Board.
-  *
-- * Copyright 2018 NXP
-+ * Copyright 2018-2019 NXP
-  *
-  * Harninder Rai <harninder.rai@nxp.com>
-  *
-@@ -107,6 +107,14 @@
- 	};
- };
- 
-+&can0 {
-+	status = "okay";
-+};
-+
-+&can1 {
-+	status = "okay";
-+};
-+
- &duart0 {
- 	status = "okay";
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-@@ -2,7 +2,7 @@
- /*
-  * Device Tree file for NXP LS1028A RDB Board.
-  *
-- * Copyright 2018 NXP
-+ * Copyright 2018-2019 NXP
-  *
-  * Harninder Rai <harninder.rai@nxp.com>
-  *
-@@ -152,6 +152,22 @@
- 	};
- };
- 
-+&can0 {
-+	status = "okay";
-+
-+	can-transceiver {
-+		max-bitrate = <5000000>;
-+	};
-+};
-+
-+&can1 {
-+	status = "okay";
-+
-+	can-transceiver {
-+		max-bitrate = <5000000>;
-+	};
-+};
-+
- &duart0 {
- 	status = "okay";
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -2,7 +2,7 @@
- /*
-  * Device Tree Include file for NXP Layerscape-1028A family SoC.
-  *
-- * Copyright 2018 NXP
-+ * Copyright 2018-2019 NXP
-  *
-  * Harninder Rai <harninder.rai@nxp.com>
-  *
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0059-arm64-dts-fsl-ls1046-Modify-the-qspi-flash-frequency.patch b/target/linux/layerscape/patches-5.4/302-dts-0059-arm64-dts-fsl-ls1046-Modify-the-qspi-flash-frequency.patch
deleted file mode 100644
index 00aaaee297..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0059-arm64-dts-fsl-ls1046-Modify-the-qspi-flash-frequency.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 0a4e4723a1765770bb04ec4a5ad427b2c97627b6 Mon Sep 17 00:00:00 2001
-From: Pankaj Bansal <pankaj.bansal@nxp.com>
-Date: Tue, 21 May 2019 20:26:29 +0530
-Subject: [PATCH] arm64: dts: fsl: ls1046: Modify the qspi flash frequency
-
-The qspi flash in ls1046a based QDS and RDB boards can operate
-at 50MHz frequency.
-Therefore, update the maximum supported freq in their respective
-dts files.
-
-Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +-
- arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 5 +++--
- 2 files changed, 4 insertions(+), 3 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
-@@ -184,7 +184,7 @@
- 		compatible = "spansion,m25p80";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
--		spi-max-frequency = <20000000>;
-+		spi-max-frequency = <50000000>;
- 		spi-rx-bus-width = <4>;
- 		spi-tx-bus-width = <4>;
- 		reg = <0>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
-@@ -3,6 +3,7 @@
-  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
-  *
-  * Copyright 2016 Freescale Semiconductor, Inc.
-+ * Copyright 2019 NXP
-  *
-  * Mingkai Hu <mingkai.hu@nxp.com>
-  */
-@@ -101,7 +102,7 @@
- 		compatible = "spansion,m25p80";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
--		spi-max-frequency = <20000000>;
-+		spi-max-frequency = <50000000>;
- 		spi-rx-bus-width = <4>;
- 		spi-tx-bus-width = <4>;
- 		reg = <0>;
-@@ -111,7 +112,7 @@
- 		compatible = "spansion,m25p80";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
--		spi-max-frequency = <20000000>;
-+		spi-max-frequency = <50000000>;
- 		spi-rx-bus-width = <4>;
- 		spi-tx-bus-width = <4>;
- 		reg = <1>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0060-arm64-dts-ls1028a-add-flexspi-nodes.patch b/target/linux/layerscape/patches-5.4/302-dts-0060-arm64-dts-ls1028a-add-flexspi-nodes.patch
deleted file mode 100644
index 84aa2390a8..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0060-arm64-dts-ls1028a-add-flexspi-nodes.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From b94cbaaa2facfdc6aa49d6f323da251f9e91d4ba Mon Sep 17 00:00:00 2001
-From: Xiaowei Bao <xiaowei.bao@nxp.com>
-Date: Tue, 14 May 2019 18:17:31 +0800
-Subject: [PATCH] arm64: dts: ls1028a: add flexspi nodes
-
-Add fspi node property for LS1028A SoC for FlexSPI driver.
-Property added for the FlexSPI controller and for the connected
-slave device for the LS1028ARDB and LS1028AQDS target.
-This is having one SPI-NOR flash device, mt35xu02g connected at
-CS0.
-
-Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15 +++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15 +++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi    | 12 ++++++++++++
- 3 files changed, 42 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-@@ -226,6 +226,21 @@
- 	phy-connection-type = "rgmii-id";
- };
- 
-+&fspi {
-+	status = "okay";
-+	mt35xu02g: flash@0 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		m25p,fast-read;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
-+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
-+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
-+	};
-+};
-+
- &sai1 {
- 	status = "okay";
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-@@ -168,6 +168,21 @@
- 	};
- };
- 
-+&fspi {
-+	status = "okay";
-+	mt35xu02g: flash@0 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		m25p,fast-read;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
-+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
-+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
-+	};
-+};
-+
- &duart0 {
- 	status = "okay";
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -180,6 +180,18 @@
- 			clocks = <&sysclk>;
- 		};
- 
-+		fspi: spi@20c0000 {
-+			compatible = "nxp,lx2160a-fspi";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <0x0 0x20c0000 0x0 0x10000>,
-+			      <0x0 0x20000000 0x0 0x10000000>;
-+			reg-names = "FSPI", "FSPI-memory";
-+			interrupts = <0 25 0x4>; /* Level high type */
-+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-+			clock-names = "fspi_en", "fspi";
-+		};
-+
- 		i2c0: i2c@2000000 {
- 			compatible = "fsl,vf610-i2c";
- 			#address-cells = <1>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0061-sdk-dts-ls1046-drop-smmu-from-the-frwy-sdk-dtses.patch b/target/linux/layerscape/patches-5.4/302-dts-0061-sdk-dts-ls1046-drop-smmu-from-the-frwy-sdk-dtses.patch
deleted file mode 100644
index a29ca7530b..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0061-sdk-dts-ls1046-drop-smmu-from-the-frwy-sdk-dtses.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 68148cb462754f0f79b77aa56ea0e8ec899ead36 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 28 May 2019 13:35:56 +0300
-Subject: [PATCH] sdk: dts: ls1046: drop smmu from the frwy sdk dtses
-
-Drop the smmu from the frwy and frwy-usdpaa versions of the SDK device
-trees because SMMU is supported only for the upstream version of the
-dpaa ethernet drivers.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-sdk.dts    | 14 ++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-usdpaa.dts | 14 ++++++++++++++
- 2 files changed, 28 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-sdk.dts
-@@ -26,6 +26,20 @@
- &soc {
- #include "qoriq-dpaa-eth.dtsi"
- #include "qoriq-fman3-0-6oh.dtsi"
-+
-+	pcie@3400000 {
-+		/delete-property/ iommu-map;
-+	};
-+
-+	pcie@3500000 {
-+		/delete-property/ iommu-map;
-+	};
-+
-+	pcie@3600000 {
-+		/delete-property/ iommu-map;
-+	};
-+
-+	/delete-node/ iommu@9000000;
- };
- 
- &fsldpaa {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-usdpaa.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-usdpaa.dts
-@@ -69,6 +69,20 @@
- 			fsl,fman-oh-port = <&fman0_oh2>;
- 		};
- 	};
-+
-+	pcie@3400000 {
-+		/delete-property/ iommu-map;
-+	};
-+
-+	pcie@3500000 {
-+		/delete-property/ iommu-map;
-+	};
-+
-+	pcie@3600000 {
-+		/delete-property/ iommu-map;
-+	};
-+
-+	/delete-node/ iommu@9000000;
- };
- / {
- 	reserved-memory {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0062-sdk-dts-ls1046frwy-move-dma-coherent-from-soc-to-its.patch b/target/linux/layerscape/patches-5.4/302-dts-0062-sdk-dts-ls1046frwy-move-dma-coherent-from-soc-to-its.patch
deleted file mode 100644
index c2e08730b2..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0062-sdk-dts-ls1046frwy-move-dma-coherent-from-soc-to-its.patch
+++ /dev/null
@@ -1,235 +0,0 @@
-From 7d5fcedd45e066db0d2735a753a86af31ba44722 Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Wed, 29 May 2019 16:18:06 +0800
-Subject: [PATCH] sdk: dts: ls1046frwy move dma-coherent from soc to its child
- nodes
-
-Since SMMU is not supported for SDK version, USB function will down if
-still apply property 'dma-coherent' in scope of soc (USB driver is not
-ready to support it alone) in SDK device trees, decide to remove it.
-And add dma-coherent on other non-USB child nodes under soc.
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
----
- .../boot/dts/freescale/fsl-ls1046a-frwy-sdk.dts    | 174 +++++++++++++++++++++
- .../boot/dts/freescale/fsl-ls1046a-frwy-usdpaa.dts |   4 +
- 2 files changed, 178 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-sdk.dts
-@@ -24,6 +24,8 @@
- };
- 
- &soc {
-+/delete-property/ dma-coherent;
-+
- #include "qoriq-dpaa-eth.dtsi"
- #include "qoriq-fman3-0-6oh.dtsi"
- 
-@@ -65,3 +67,175 @@
- &fman0 {
- 	compatible = "fsl,fman", "simple-bus";
- };
-+
-+&clockgen {
-+	dma-coherent;
-+};
-+
-+&scfg {
-+	dma-coherent;
-+};
-+
-+&crypto {
-+	dma-coherent;
-+};
-+
-+&dcfg {
-+	dma-coherent;
-+};
-+
-+&ifc {
-+	dma-coherent;
-+};
-+
-+&qspi {
-+	dma-coherent;
-+};
-+
-+&esdhc {
-+	dma-coherent;
-+};
-+
-+&ddr {
-+	dma-coherent;
-+};
-+
-+&tmu {
-+	dma-coherent;
-+};
-+
-+&qman {
-+	dma-coherent;
-+};
-+
-+&bman {
-+	dma-coherent;
-+};
-+
-+&bportals {
-+	dma-coherent;
-+};
-+
-+&qportals {
-+	dma-coherent;
-+};
-+
-+&dspi {
-+	dma-coherent;
-+};
-+
-+&i2c0 {
-+	dma-coherent;
-+};
-+
-+&i2c1 {
-+	dma-coherent;
-+};
-+
-+&i2c2 {
-+	dma-coherent;
-+};
-+
-+&i2c3 {
-+	dma-coherent;
-+};
-+
-+&duart0 {
-+	dma-coherent;
-+};
-+
-+&duart1 {
-+	dma-coherent;
-+};
-+
-+&duart2 {
-+	dma-coherent;
-+};
-+
-+&duart3 {
-+	dma-coherent;
-+};
-+
-+&gpio0 {
-+	dma-coherent;
-+};
-+
-+&gpio1 {
-+	dma-coherent;
-+};
-+
-+&gpio2 {
-+	dma-coherent;
-+};
-+
-+&gpio3 {
-+	dma-coherent;
-+};
-+
-+&lpuart0 {
-+	dma-coherent;
-+};
-+
-+&lpuart1 {
-+	dma-coherent;
-+};
-+
-+&lpuart2 {
-+	dma-coherent;
-+};
-+
-+&lpuart3 {
-+	dma-coherent;
-+};
-+
-+&lpuart4 {
-+	dma-coherent;
-+};
-+
-+&lpuart5 {
-+	dma-coherent;
-+};
-+
-+&ftm0 {
-+	dma-coherent;
-+};
-+
-+&wdog0 {
-+	dma-coherent;
-+};
-+
-+&edma0 {
-+	dma-coherent;
-+};
-+
-+&sata {
-+	dma-coherent;
-+};
-+
-+&qdma {
-+	dma-coherent;
-+};
-+
-+&msi1 {
-+	dma-coherent;
-+};
-+
-+&msi2 {
-+	dma-coherent;
-+};
-+
-+&msi3 {
-+	dma-coherent;
-+};
-+
-+&fman0 {
-+	dma-coherent;
-+};
-+
-+&ptp_timer0 {
-+	dma-coherent;
-+};
-+
-+&fsldpaa {
-+	dma-coherent;
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-usdpaa.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-usdpaa.dts
-@@ -14,6 +14,7 @@
- 		fsl,bpid = <7>;
- 		fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
- 		fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
-+		dma-coherent;
- 	};
- 
- 	bp8: buffer-pool@8 {
-@@ -21,6 +22,7 @@
- 		fsl,bpid = <8>;
- 		fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
- 		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
-+		dma-coherent;
- 	};
- 
- 	bp9: buffer-pool@9 {
-@@ -28,10 +30,12 @@
- 		fsl,bpid = <9>;
- 		fsl,bpool-ethernet-cfg = <0 0 0 2048 0 0xfeedabba>;
- 		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
-+		dma-coherent;
- 	};
- 
- 	fsl,dpaa {
- 		compatible = "fsl,ls1046a", "fsl,dpaa", "simple-bus";
-+		dma-coherent;
- 
- 		ethernet@0 {
- 			compatible = "fsl,dpa-ethernet-init";
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0063-arm64-dts-fsl-remove-backplane-support.patch b/target/linux/layerscape/patches-5.4/302-dts-0063-arm64-dts-fsl-remove-backplane-support.patch
deleted file mode 100644
index 749df043e0..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0063-arm64-dts-fsl-remove-backplane-support.patch
+++ /dev/null
@@ -1,574 +0,0 @@
-From 278bacf54eabe391159cef3112f8e8bf0fa7b891 Mon Sep 17 00:00:00 2001
-From: Florinel Iordache <florinel.iordache@nxp.com>
-Date: Mon, 27 May 2019 15:57:05 +0300
-Subject: [PATCH] arm64: dts: fsl: remove backplane support
-
-Remove entire backplane support from device tree for all supported platforms
-
-Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
----
- .../boot/dts/freescale/fsl-ls1046a-qds-sdk.dts     |  4 -
- .../boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts     | 34 --------
- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi     |  5 --
- arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts  | 26 -------
- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi     | 46 -----------
- arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts  | 58 --------------
- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     | 90 ----------------------
- arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts  | 60 ---------------
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     | 86 ---------------------
- .../boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi    |  4 +-
- .../boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi    |  4 +-
- 11 files changed, 4 insertions(+), 413 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
-@@ -259,10 +259,6 @@ pcie@3600000 {
- 	dma-coherent;
- };
- 
--&serdes1 {
--	dma-coherent;
--};
--
- &fsldpaa {
- 	dma-coherent;
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
-@@ -100,36 +100,6 @@ pcie@3600000 {
- 	compatible = "fsl,fman", "simple-bus";
- };
- 
--&mdio9 {
--	pcsphy6: ethernet-phy@0 {
--		backplane-mode = "10gbase-kr";
--		compatible = "ethernet-phy-ieee802.3-c45";
--		reg = <0x0>;
--		fsl,lane-handle = <&serdes1>;
--		fsl,lane-reg = <0x8C0 0x40>;   /* lane D */
--	};
--};
--
--&mdio10 {
--	pcsphy7: ethernet-phy@0 {
--		backplane-mode = "10gbase-kr";
--		compatible = "ethernet-phy-ieee802.3-c45";
--		reg = <0x0>;
--		fsl,lane-handle = <&serdes1>;
--		fsl,lane-reg = <0x880 0x40>;   /* lane C */
--	};
--};
--
--/* Update MAC connections to backplane PHYs
-- * &mac9 {
-- *	phy-handle = <&pcsphy6>;
-- *};
-- *
-- *&mac10 {
-- *	phy-handle = <&pcsphy7>;
-- *};
--*/
--
- &clockgen {
- 	dma-coherent;
- };
-@@ -298,10 +268,6 @@ pcie@3600000 {
- 	dma-coherent;
- };
- 
--&serdes1 {
--	dma-coherent;
--};
--
- &fsldpaa {
- 	dma-coherent;
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-@@ -680,11 +680,6 @@
- 				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
- 		};
- 
--		serdes1: serdes@1ea0000 {
--			reg = <0x0 0x1ea0000 0 0x00002000>;
--			compatible = "fsl,serdes-10g";
--		};
--
- 		pcie@3400000 {
- 			compatible = "fsl,ls1046a-pcie";
- 			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
-@@ -170,29 +170,3 @@
- &sata {
- 	status = "okay";
- };
--
--&pcs_mdio1 {
--		pcs_phy1: ethernet-phy@0 {
--		backplane-mode = "10gbase-kr";
--		compatible = "ethernet-phy-ieee802.3-c45";
--		reg = <0x0>;
--		fsl,lane-handle = <&serdes1>;
--		fsl,lane-reg = <0x840 0x40>;/* lane B */
--	};
--};
--
--&pcs_mdio2 {
--		pcs_phy2: ethernet-phy@0 {
--		backplane-mode = "10gbase-kr";
--		compatible = "ethernet-phy-ieee802.3-c45";
--		reg = <0x0>;
--		fsl,lane-handle = <&serdes1>;
--		fsl,lane-reg = <0x800 0x40>;/* lane A */
--	};
--};
--
--/* Update DPMAC connections to backplane PHYs, under SerDes 0x1D_0xXX.
-- * &dpmac1 {
-- *	phy-handle = <&pcs_phy1>;
-- * };
-- */
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-@@ -183,12 +183,6 @@
- 			little-endian;
- 		};
- 
--		serdes1: serdes@1ea0000 {
--				compatible = "fsl,serdes-10g";
--				reg = <0x0 0x1ea0000 0 0x00002000>;
--				little-endian;
--		};
--
- 		tmu: tmu@1f80000 {
- 			compatible = "fsl,qoriq-tmu";
- 			reg = <0x0 0x1f80000 0x0 0x10000>;
-@@ -333,46 +327,6 @@
- 
- 			#address-cells = <1>;
- 			#size-cells = <0>;
--		};
--
--		pcs_mdio1: mdio@8c07000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c07000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio2: mdio@8c0b000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c0b000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio3: mdio@8c0f000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c0f000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio4: mdio@8c13000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c13000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
- 		};
- 
- 		ifc: ifc@2240000 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
-@@ -71,64 +71,6 @@
- 	};
- };
- 
--&pcs_mdio1 {
--		pcs_phy1: ethernet-phy@0 {
--		backplane-mode = "10gbase-kr";
--		compatible = "ethernet-phy-ieee802.3-c45";
--		reg = <0x0>;
--		fsl,lane-handle = <&serdes1>;
--		fsl,lane-reg = <0x9C0 0x40>;/* lane H */
--	};
--};
--
--&pcs_mdio2 {
--		pcs_phy2: ethernet-phy@0 {
--		backplane-mode = "10gbase-kr";
--		compatible = "ethernet-phy-ieee802.3-c45";
--		reg = <0x0>;
--		fsl,lane-handle = <&serdes1>;
--		fsl,lane-reg = <0x980 0x40>;/* lane G */
--	};
--};
--
--&pcs_mdio3 {
--		pcs_phy3: ethernet-phy@0 {
--		backplane-mode = "10gbase-kr";
--		compatible = "ethernet-phy-ieee802.3-c45";
--		reg = <0x0>;
--		fsl,lane-handle = <&serdes1>;
--		fsl,lane-reg = <0x940 0x40>;/* lane F */
--	};
--};
--
--&pcs_mdio4 {
--		pcs_phy4: ethernet-phy@0 {
--		backplane-mode = "10gbase-kr";
--		compatible = "ethernet-phy-ieee802.3-c45";
--		reg = <0x0>;
--		fsl,lane-handle = <&serdes1>;
--		fsl,lane-reg = <0x900 0x40>;/* lane E */
--	};
--};
--
--/* Update DPMAC connections to backplane PHYs, under SerDes 0x2a_0xXX.
-- * &dpmac1 {
-- *	phy-handle = <&pcs_phy1>;
-- * };
-- *
-- * &dpmac2 {
-- *	phy-handle = <&pcs_phy2>;
-- * };
-- *
-- * &dpmac3 {
-- *	phy-handle = <&pcs_phy3>;
-- * };
-- *
-- * &dpmac4 {
-- *	phy-handle = <&pcs_phy4>;
-- * };
-- */
--
- /* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
- &dpmac9 {
- 	phy-handle = <&mdio0_phy12>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-@@ -549,90 +549,6 @@
- 			#size-cells = <0>;
- 		};
- 
--		pcs_mdio1: mdio@8c07000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c07000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio2: mdio@8c0b000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c0b000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio3: mdio@8c0f000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c0f000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio4: mdio@8c13000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c13000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio5: mdio@8c17000 {
--			status = "disabled";
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c17000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio6: mdio@8c1b000 {
--			status = "disabled";
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c1b000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio7: mdio@8c1f000 {
--			status = "disabled";
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c1f000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio8: mdio@8c23000 {
--			status = "disabled";
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c23000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
- 		i2c0: i2c@2000000 {
- 			status = "disabled";
- 			compatible = "fsl,vf610-i2c", "fsl,ls208xa-vf610-i2c";
-@@ -834,12 +750,6 @@
- 			snps,host-vbus-glitches;
- 		};
- 
--		serdes1: serdes@1ea0000 {
--				compatible = "fsl,serdes-10g";
--				reg = <0x0 0x1ea0000 0 0x00002000>;
--				little-endian;
--		};
--
- 		ccn@4000000 {
- 			compatible = "arm,ccn-504";
- 			reg = <0x0 0x04000000 0x0 0x01000000>;
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
-@@ -316,46 +316,6 @@
- 	status = "okay";
- };
- 
--&pcs_mdio1 {
--	pcs_phy1: ethernet-phy@0 {
--		compatible = "ethernet-phy-ieee802.3-c45";
--		backplane-mode = "40gbase-kr";
--		reg = <0x0>;
--		fsl,lane-handle = <&serdes1>;
--		fsl,lane-reg = <0xF00 0xE00 0xD00 0xC00>; /* lanes H, G, F, E */
--	};
--};
--
--&pcs_mdio2 {
--	pcs_phy2: ethernet-phy@0 {
--		compatible = "ethernet-phy-ieee802.3-c45";
--		backplane-mode = "40gbase-kr";
--		reg = <0x0>;
--		fsl,lane-handle = <&serdes1>;
--		fsl,lane-reg = <0xB00 0xA00 0x900 0x800>; /* lanes D, C, B, A */
--	};
--};
--
--&pcs_mdio3 {
--	pcs_phy3: ethernet-phy@0 {
--		compatible = "ethernet-phy-ieee802.3-c45";
--		backplane-mode = "10gbase-kr";
--		reg = <0x0>;
--		fsl,lane-handle = <&serdes1>;
--		fsl,lane-reg = <0xF00 0x100>; /* lane H */
--	};
--};
--
--&pcs_mdio4 {
--	pcs_phy4: ethernet-phy@0 {
--		compatible = "ethernet-phy-ieee802.3-c45";
--		backplane-mode = "10gbase-kr";
--		reg = <0x0>;
--		fsl,lane-handle = <&serdes1>;
--		fsl,lane-reg = <0xE00 0x100>; /* lane G */
--	};
--};
--
- &sata0 {
- 	status = "okay";
- };
-@@ -371,23 +331,3 @@
- &sata3 {
- 	status = "okay";
- };
--
--/* Update DPMAC connections to 40G backplane PHYs
-- * &dpmac1 {
-- *	phy-handle = <&pcs_phy1>;
-- * };
-- * 
-- * &dpmac2 {
-- *	phy-handle = <&pcs_phy2>;
-- * };
-- */
--
--/* Update DPMAC connections to 10G backplane PHYs
-- * &dpmac3 {
-- *	phy-handle = <&pcs_phy3>;
-- * };
-- * 
-- * &dpmac4 {
-- *	phy-handle = <&pcs_phy4>;
-- * };
-- */
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -500,92 +500,6 @@
- 			status = "disabled";
- 		};
- 
--		pcs_mdio1: mdio@8c07000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c07000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio2: mdio@8c0b000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c0b000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio3: mdio@8c0f000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c0f000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio4: mdio@8c13000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c13000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio5: mdio@8c17000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c17000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio6: mdio@8c1b000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c1b000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio7: mdio@8c1f000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c1f000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		pcs_mdio8: mdio@8c23000 {
--			compatible = "fsl,fman-memac-mdio";
--			reg = <0x0 0x8c23000 0x0 0x1000>;
--			device_type = "mdio";
--			little-endian;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		serdes1: serdes@1ea0000 {
--				compatible = "fsl,serdes-28g";
--				reg = <0x0 0x1ea0000 0 0x00002000>;
--				little-endian;
--		};
--
- 		i2c0: i2c@2000000 {
- 			compatible = "fsl,vf610-i2c";
- 			#address-cells = <1>;
---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
-+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
-@@ -22,7 +22,7 @@ fman@1a00000 {
- 		fsl,qman-channel-id = <0x800>;
- 	};
- 
--	mac9: ethernet@f0000 {
-+	ethernet@f0000 {
- 		cell-index = <0x8>;
- 		compatible = "fsl,fman-memac";
- 		reg = <0xf0000 0x1000>;
-@@ -30,7 +30,7 @@ fman@1a00000 {
- 		pcsphy-handle = <&pcsphy6>;
- 	};
- 
--	mdio9: mdio@f1000 {
-+	mdio@f1000 {
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
-+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
-@@ -22,7 +22,7 @@ fman@1a00000 {
- 		fsl,qman-channel-id = <0x801>;
- 	};
- 
--	mac10: ethernet@f2000 {
-+	ethernet@f2000 {
- 		cell-index = <0x9>;
- 		compatible = "fsl,fman-memac";
- 		reg = <0xf2000 0x1000>;
-@@ -30,7 +30,7 @@ fman@1a00000 {
- 		pcsphy-handle = <&pcsphy7>;
- 	};
- 
--	mdio10: mdio@f3000 {
-+	mdio@f3000 {
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0064-arm64-dts-lx2160a-update-interrupt-property-for-Aqua.patch b/target/linux/layerscape/patches-5.4/302-dts-0064-arm64-dts-lx2160a-update-interrupt-property-for-Aqua.patch
deleted file mode 100644
index e5abac75a8..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0064-arm64-dts-lx2160a-update-interrupt-property-for-Aqua.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From e463f4a9d933d2d62a065bba356a9eb04a9f3ac0 Mon Sep 17 00:00:00 2001
-From: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
-Date: Tue, 11 Jun 2019 23:53:45 +0300
-Subject: [PATCH] arm64: dts: lx2160a: update interrupt property for Aquantia
- phy
-
-Update Aquantia AQR107 nodes interrupt property.
-
-Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-@@ -200,13 +200,13 @@
- 	aquantia_phy1: ethernet-phy@4 {
- 		/* AQR107 PHY - "compatible" property not strictly needed */
- 		compatible = "ethernet-phy-ieee802.3-c45";
--		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- 		reg = <0x4>;
- 	};
- 	aquantia_phy2: ethernet-phy@5 {
- 		/* AQR107 PHY - "compatible" property not strictly needed */
- 		compatible = "ethernet-phy-ieee802.3-c45";
--		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- 		reg = <0x5>;
- 	};
- };
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0065-arm64-dts-ls1028a-Update-fspi-reg-properties.patch b/target/linux/layerscape/patches-5.4/302-dts-0065-arm64-dts-ls1028a-Update-fspi-reg-properties.patch
deleted file mode 100644
index 577dd372e6..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0065-arm64-dts-ls1028a-Update-fspi-reg-properties.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From bfd089c26a8b3c1eb83c94dc0f72c0f80fb7e5ef Mon Sep 17 00:00:00 2001
-From: Kuldeep Singh <kuldeep.singh@nxp.com>
-Date: Fri, 14 Jun 2019 12:34:14 +0530
-Subject: [PATCH] arm64: dts: ls1028a: Update fspi reg properties
-
-Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -186,7 +186,7 @@
- 			#size-cells = <0>;
- 			reg = <0x0 0x20c0000 0x0 0x10000>,
- 			      <0x0 0x20000000 0x0 0x10000000>;
--			reg-names = "FSPI", "FSPI-memory";
-+			reg-names = "fspi_base", "fspi_mmap";
- 			interrupts = <0 25 0x4>; /* Level high type */
- 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- 			clock-names = "fspi_en", "fspi";
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0066-arm64-dts-ls1028a-add-gpu-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0066-arm64-dts-ls1028a-add-gpu-node.patch
deleted file mode 100644
index c429b7ca1e..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0066-arm64-dts-ls1028a-add-gpu-node.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 3e04a861ff536927ede8e826b7c4a5bf6a80dda7 Mon Sep 17 00:00:00 2001
-From: Yuantian Tang <andy.tang@nxp.com>
-Date: Tue, 18 Jun 2019 01:29:49 -0400
-Subject: [PATCH] arm64: dts: ls1028a: add gpu node
-
-Add GPU dts node to enable GPU feature.
-
-Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -536,6 +536,16 @@
- 			clock-names = "wdog_clk", "apb_pclk";
- 		};
- 
-+		gpu@f0c0000 {
-+			compatible = "fsl,ls1028a-gpu";
-+			reg = <0x0 0x0f0c0000 0x0 0x10000>,
-+				<0x0 0x80000000 0x0 0x80000000>,
-+				<0x0 0x0 0x0 0x3000000>;
-+			reg-names = "base", "phys_baseaddr",
-+				"contiguous_mem";
-+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
- 		sai1: audio-controller@f100000 {
- 			#sound-dai-cells = <0>;
- 			compatible = "fsl,vf610-sai";
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0067-arm64-dts-fsl-add-optee-node-for-ls1028.patch b/target/linux/layerscape/patches-5.4/302-dts-0067-arm64-dts-fsl-add-optee-node-for-ls1028.patch
deleted file mode 100644
index 570a010bb0..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0067-arm64-dts-fsl-add-optee-node-for-ls1028.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 1021f327657a464fbe8bd9eab927f18b8cf7556e Mon Sep 17 00:00:00 2001
-From: Sahil Malhotra <sahil.malhotra@nxp.com>
-Date: Sat, 3 Aug 2019 09:45:28 +0530
-Subject: [PATCH] arm64: dts: fsl: add optee node for ls1028
-
-For enabling OP-TEE on LS1028, need to add optee node
-in DTS
-
-Signed-off-by: Sahil Malhotra <sahil.malhotra@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -769,6 +769,13 @@
- 		};
- 	};
- 
-+	firmware {
-+		optee {
-+			compatible = "linaro,optee-tz";
-+			method = "smc";
-+		};
-+	};
-+
- 	malidp0: display@f080000 {
- 		compatible = "arm,mali-dp500";
- 		reg = <0x0 0xf080000 0x0 0x10000>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0068-arm64-dts-lx2160a-Update-phy-mode-for-Aquantia-PHYs.patch b/target/linux/layerscape/patches-5.4/302-dts-0068-arm64-dts-lx2160a-Update-phy-mode-for-Aquantia-PHYs.patch
deleted file mode 100644
index f227f82438..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0068-arm64-dts-lx2160a-Update-phy-mode-for-Aquantia-PHYs.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 6915b8ddc149601e6f0baf4836f0f9f18e3ee25f Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Wed, 24 Jul 2019 20:22:57 +0300
-Subject: [PATCH] arm64: dts: lx2160a: Update phy mode for Aquantia PHYs
-
-The Aquantia driver does not allow xgmii mode anymore for
-the AQR107 PHYs. Use the correct usxgmii mode instead.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
-@@ -220,12 +220,12 @@
- 
- &dpmac3 {
- 	phy-handle = <&aquantia_phy1>;
--	phy-connection-type = "xgmii";
-+	phy-connection-type = "usxgmii";
- };
- 
- &dpmac4 {
- 	phy-handle = <&aquantia_phy2>;
--	phy-connection-type = "xgmii";
-+	phy-connection-type = "usxgmii";
- };
- 
- &dpmac5 {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0069-arm64-dts-ls1028a-Add-ftm_alarm0-DT-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0069-arm64-dts-ls1028a-Add-ftm_alarm0-DT-node.patch
deleted file mode 100644
index b5193a5310..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0069-arm64-dts-ls1028a-Add-ftm_alarm0-DT-node.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From cc4f01aa78bfbebd7bdb52b4d873b5c9a332319e Mon Sep 17 00:00:00 2001
-From: Biwen Li <biwen.li@nxp.com>
-Date: Thu, 27 Jun 2019 14:24:29 +0800
-Subject: [PATCH] arm64: dts: ls1028a: Add ftm_alarm0 DT node
-
-The patch adds ftm_alarm0 DT node for LS1028ARDB board
-FlexTimer1 module is used to wakeup the system
-
-Signed-off-by: Biwen Li <biwen.li@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -17,6 +17,10 @@
- 	#address-cells = <2>;
- 	#size-cells = <2>;
- 
-+	aliases {
-+		rtc1 = &ftm_alarm0;
-+	};
-+
- 	cpus {
- 		#address-cells = <1>;
- 		#size-cells = <0>;
-@@ -767,6 +771,19 @@
- 				little-endian;
- 			};
- 		};
-+
-+		rcpm: rcpm@1e34040 {
-+			compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
-+			reg = <0x0 0x1e34040 0x0 0x1c>;
-+			#fsl,rcpm-wakeup-cells = <7>;
-+		};
-+
-+		ftm_alarm0: timer@2800000 {
-+			compatible = "fsl,ls1028a-ftm-alarm";
-+			reg = <0x0 0x2800000 0x0 0x10000>;
-+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
-+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-+		};
- 	};
- 
- 	firmware {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0070-arm64-dts-ls1012a-ls1043a-ls1046a-ls1088a-ls208xa-re.patch b/target/linux/layerscape/patches-5.4/302-dts-0070-arm64-dts-ls1012a-ls1043a-ls1046a-ls1088a-ls208xa-re.patch
deleted file mode 100644
index 78713d778e..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0070-arm64-dts-ls1012a-ls1043a-ls1046a-ls1088a-ls208xa-re.patch
+++ /dev/null
@@ -1,297 +0,0 @@
-From c97c6ebf6fd6a6ff72bd7d58a12de0c07f14953e Mon Sep 17 00:00:00 2001
-From: Biwen Li <biwen.li@nxp.com>
-Date: Thu, 27 Jun 2019 15:02:44 +0800
-Subject: [PATCH] arm64: dts: ls1012a/ls1043a/ls1046a/ls1088a/ls208xa: replace
- ftm0 with ftm_alarm0
-
-The patch replaces ftm0 with ftm_alarm0 DT node
-	- replace ftm0 with ftm_alarm0
-	- add new rcpm node
-	- remove old rcpm node
-	- aliases ftm_alarm0 as rtc1
-
-Signed-off-by: Biwen Li <biwen.li@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi     | 23 +++++++++++----------
- .../boot/dts/freescale/fsl-ls1043a-qds-sdk.dts     |  2 +-
- .../boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts     |  2 +-
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi     | 24 +++++++++++++---------
- .../boot/dts/freescale/fsl-ls1046a-frwy-sdk.dts    |  2 +-
- .../boot/dts/freescale/fsl-ls1046a-qds-sdk.dts     |  2 +-
- .../boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts     |  2 +-
- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi     | 24 ++++++++++++++--------
- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi     | 20 ++++++++++++------
- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     | 12 +++++++++--
- 10 files changed, 70 insertions(+), 43 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-@@ -23,6 +23,7 @@
- 		rtic-c = &rtic_c;
- 		rtic-d = &rtic_d;
- 		sec-mon = &sec_mon;
-+		rtc1 = &ftm_alarm0;
- 	};
- 
- 	cpus {
-@@ -290,15 +291,21 @@
- 			#thermal-sensor-cells = <1>;
- 		};
- 
--		ftm0: ftm0@29d0000 {
--			compatible = "fsl,ftm-alarm";
--			reg = <0x0 0x29d0000 0x0 0x10000>,
--			      <0x0 0x1ee2140 0x0 0x4>;
--			reg-names = "ftm", "FlexTimer1";
-+		rcpm: rcpm@1ee2140 {
-+			compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
-+			reg = <0x0 0x1ee2140 0x0 0x4>;
-+			#fsl,rcpm-wakeup-cells = <1>;
-+		};
-+
-+		ftm_alarm0: timer@29d0000 {
-+			compatible = "fsl,ls1012a-ftm-alarm";
-+			reg = <0x0 0x29d0000 0x0 0x10000>;
-+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
- 			interrupts = <0 86 0x4>;
- 			big-endian;
- 		};
- 
-+
- 		i2c0: i2c@2180000 {
- 			compatible = "fsl,vf610-i2c", "fsl,ls1012a-vf610-i2c";
- 			#address-cells = <1>;
-@@ -497,12 +504,6 @@
- 					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
- 			status = "disabled";
- 		};
--
--		rcpm: rcpm@1ee2000 {
--			compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1";
--			reg = <0x0 0x1ee2000 0x0 0x1000>;
--			fsl,#rcpm-wakeup-cells = <1>;
--		};
- 	};
- 
- 	reserved-memory {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts
-@@ -226,7 +226,7 @@ pcie@3600000 {
- 	dma-coherent;
- };
- 
--&ftm0 {
-+&ftm_alarm0 {
- 	dma-coherent;
- };
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts
-@@ -221,7 +221,7 @@ pcie@3600000 {
- 	dma-coherent;
- };
- 
--&ftm0 {
-+&ftm_alarm0 {
- 	dma-coherent;
- };
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -27,6 +27,7 @@
- 		ethernet4 = &enet4;
- 		ethernet5 = &enet5;
- 		ethernet6 = &enet6;
-+		rtc1 = &ftm_alarm0;
- 	};
- 
- 	cpus {
-@@ -661,16 +662,6 @@
- 			status = "disabled";
- 		};
- 
--		ftm0: ftm0@29d0000 {
--			compatible = "fsl,ftm-alarm";
--			reg = <0x0 0x29d0000 0x0 0x10000>,
--			      <0x0 0x1ee2140 0x0 0x4>;
--			reg-names = "ftm", "FlexTimer1";
--			interrupts = <0 86 0x4>;
--			big-endian;
--			status = "okay";
--		};
--
- 		wdog0: wdog@2ad0000 {
- 			compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
- 			reg = <0x0 0x2ad0000 0x0 0x10000>;
-@@ -875,6 +866,19 @@
- 			big-endian;
- 		};
- 
-+		rcpm: rcpm@1ee2140 {
-+			compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+";
-+			reg = <0x0 0x1ee2140 0x0 0x4>;
-+			#fsl,rcpm-wakeup-cells = <1>;
-+		};
-+
-+		ftm_alarm0: timer@29d0000 {
-+			compatible = "fsl,ls1043a-ftm-alarm";
-+			reg = <0x0 0x29d0000 0x0 0x10000>;
-+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
-+			interrupts = <0 86 0x4>;
-+			big-endian;
-+		};
- 	};
- 
- 	firmware {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy-sdk.dts
-@@ -196,7 +196,7 @@
- 	dma-coherent;
- };
- 
--&ftm0 {
-+&ftm_alarm0 {
- 	dma-coherent;
- };
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
-@@ -223,7 +223,7 @@ pcie@3600000 {
- 	dma-coherent;
- };
- 
--&ftm0 {
-+&ftm_alarm0 {
- 	dma-coherent;
- };
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
-@@ -228,7 +228,7 @@ pcie@3600000 {
- 	dma-coherent;
- };
- 
--&ftm0 {
-+&ftm_alarm0 {
- 	dma-coherent;
- };
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-@@ -28,6 +28,7 @@
- 		ethernet5 = &enet5;
- 		ethernet6 = &enet6;
- 		ethernet7 = &enet7;
-+		rtc1 = &ftm_alarm0;
- 	};
- 
- 	cpus {
-@@ -561,15 +562,6 @@
- 			status = "disabled";
- 		};
- 
--		ftm0: ftm0@29d0000 {
--			compatible = "fsl,ftm-alarm";
--			reg = <0x0 0x29d0000 0x0 0x10000>,
--			      <0x0 0x1ee2140 0x0 0x4>;
--			reg-names = "ftm", "FlexTimer1";
--			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
--			big-endian;
--		};
--
- 		wdog0: watchdog@2ad0000 {
- 			compatible = "fsl,imx21-wdt";
- 			reg = <0x0 0x2ad0000 0x0 0x10000>;
-@@ -811,6 +803,20 @@
- 			queue-sizes = <64 64>;
- 			big-endian;
- 		};
-+
-+		rcpm: rcpm@1ee208c {
-+			compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+";
-+			reg = <0x0 0x1ee208c 0x0 0x4>;
-+			#fsl,rcpm-wakeup-cells = <1>;
-+		};
-+
-+		ftm_alarm0: timer@29d0000 {
-+			compatible = "fsl,ls1046a-ftm-alarm";
-+			reg = <0x0 0x29d0000 0x0 0x10000>;
-+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
-+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+			big-endian;
-+		};
- 	};
- 
- 	reserved-memory {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-@@ -18,6 +18,7 @@
- 
- 	aliases {
- 		crypto = &crypto;
-+		rtc1 = &ftm_alarm0;
- 	};
- 
- 	cpus {
-@@ -339,12 +340,6 @@
- 			status = "disabled";
- 		};
- 
--		ftm0: ftm0@2800000 {
--			compatible = "fsl,ftm-alarm";
--			reg = <0x0 0x2800000 0x0 0x10000>;
--			interrupts = <0 44 4>;
--		};
--
- 		i2c0: i2c@2000000 {
- 			compatible = "fsl,vf610-i2c", "fsl,ls1088a-vf610-i2c";
- 			#address-cells = <1>;
-@@ -792,6 +787,19 @@
- 				};
- 			};
- 		};
-+
-+		rcpm: rcpm@1e34040 {
-+			compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
-+			reg = <0x0 0x1e34040 0x0 0x18>;
-+			#fsl,rcpm-wakeup-cells = <6>;
-+		};
-+
-+		ftm_alarm0: timer@2800000 {
-+			compatible = "fsl,ls1088a-ftm-alarm";
-+			reg = <0x0 0x2800000 0x0 0x10000>;
-+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
-+			interrupts = <0 44 4>;
-+		};
- 	};
- 
- 	firmware {
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-@@ -24,6 +24,7 @@
- 		serial1 = &serial1;
- 		serial2 = &serial2;
- 		serial3 = &serial3;
-+		rtc1 = &ftm_alarm0;
- 	};
- 
- 	cpu: cpus {
-@@ -756,9 +757,16 @@
- 			interrupts = <0 12 4>;
- 		};
- 
--		ftm0: ftm0@2800000 {
--			compatible = "fsl,ftm-alarm";
-+		rcpm: rcpm@1e34040 {
-+			compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
-+			reg = <0x0 0x1e34040 0x0 0x18>;
-+			#fsl,rcpm-wakeup-cells = <6>;
-+		};
-+
-+		ftm_alarm0: timer@2800000 {
-+			compatible = "fsl,ls208xa-ftm-alarm";
- 			reg = <0x0 0x2800000 0x0 0x10000>;
-+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
- 			interrupts = <0 44 4>;
- 		};
- 	};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0071-arm-dts-ls1021a-replace-ftm0-with-ftm_alarm0-DT-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0071-arm-dts-ls1021a-replace-ftm0-with-ftm_alarm0-DT-node.patch
deleted file mode 100644
index 2d63cc0b55..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0071-arm-dts-ls1021a-replace-ftm0-with-ftm_alarm0-DT-node.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From f3a115bd1372e774979ecb81919664279b81810e Mon Sep 17 00:00:00 2001
-From: Biwen Li <biwen.li@nxp.com>
-Date: Fri, 28 Jun 2019 16:36:20 +0800
-Subject: [PATCH] arm: dts: ls1021a: replace ftm0 with ftm_alarm0 DT node
-
-The patch replaces ftm0 with ftm_alarm0 DT node
-	- remove old ftm0 node
-	- add rcpm node
-	- add ftm_alarm0 node
-	- aliases ftm_alarm0 as rtc1
-
-Signed-off-by: Biwen Li <biwen.li@nxp.com>
----
- arch/arm/boot/dts/ls1021a.dtsi | 24 ++++++++++++++----------
- 1 file changed, 14 insertions(+), 10 deletions(-)
-
---- a/arch/arm/boot/dts/ls1021a.dtsi
-+++ b/arch/arm/boot/dts/ls1021a.dtsi
-@@ -66,6 +66,7 @@
- 		serial4 = &lpuart4;
- 		serial5 = &lpuart5;
- 		sysclk = &sysclk;
-+		rtc1 = &ftm_alarm0;
- 	};
- 
- 	cpus {
-@@ -549,16 +550,6 @@
- 			status = "disabled";
- 		};
- 
--		ftm0: ftm0@29d0000 {
--			compatible = "fsl,ftm-alarm";
--			reg = <0x0 0x29d0000 0x0 0x10000>,
--			      <0x0 0x1ee2140 0x0 0x4>;
--			reg-names = "ftm", "FlexTimer1";
--			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
--			big-endian;
--			status = "okay";
--		};
--
- 		pwm1: pwm@29e0000 {
- 			compatible = "fsl,vf610-ftm-pwm";
- 			#pwm-cells = <3>;
-@@ -970,6 +961,19 @@
- 			big-endian;
- 		};
- 
-+		rcpm: rcpm@1ee2140 {
-+			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
-+			reg = <0x0 0x1ee2140 0x0 0x8>;
-+			#fsl,rcpm-wakeup-cells = <2>;
-+		};
-+
-+		ftm_alarm0: timer0@29d0000 {
-+			compatible = "fsl,ls1021a-ftm-alarm";
-+			reg = <0x0 0x29d0000 0x0 0x10000>;
-+			fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>;
-+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-+			big-endian;
-+		};
- 	};
- 
- 	thermal-zones {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0072-arm64-ls1028ardb-Add-support-DP-nodes-for-LS1028ARDB.patch b/target/linux/layerscape/patches-5.4/302-dts-0072-arm64-ls1028ardb-Add-support-DP-nodes-for-LS1028ARDB.patch
deleted file mode 100644
index 2b8564fc14..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0072-arm64-ls1028ardb-Add-support-DP-nodes-for-LS1028ARDB.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From b778a15d8781263bb768c404965dd5ec4bbe80c8 Mon Sep 17 00:00:00 2001
-From: Wen He <wen.he_1@nxp.com>
-Date: Wed, 17 Jul 2019 15:04:13 +0800
-Subject: [PATCH] arm64: ls1028ardb: Add support DP nodes for LS1028ARDB
-
-This patch add HDP PHY Controller related nodes on the LS1028ARDB.
-
-Signed-off-by: Alison Wang <alison.wang@nxp.com>
-Signed-off-by: Wen He <wen.he_1@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-@@ -215,3 +215,15 @@
- &sata {
- 	status = "okay";
- };
-+
-+&hdptx0 {
-+	fsl,no_edid;
-+	resolution = "3840x2160@60",
-+		   "1920x1080@60",
-+		   "1280x720@60",
-+		   "720x480@60";
-+	lane_mapping = <0x4e>;
-+	edp_link_rate = <0x6>;
-+	edp_num_lanes = <0x4>;
-+	status = "okay";
-+};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0073-arm64-ls1028aqds-Add-support-DP-nodes-for-LS1028AQDS.patch b/target/linux/layerscape/patches-5.4/302-dts-0073-arm64-ls1028aqds-Add-support-DP-nodes-for-LS1028AQDS.patch
deleted file mode 100644
index 3ccd41f57c..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0073-arm64-ls1028aqds-Add-support-DP-nodes-for-LS1028AQDS.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 3e4421bc3d2055d599c65d5519b1eb63c0b9468e Mon Sep 17 00:00:00 2001
-From: Wen He <wen.he_1@nxp.com>
-Date: Wed, 17 Jul 2019 15:06:06 +0800
-Subject: [PATCH] arm64: ls1028aqds: Add support DP nodes for LS1028AQDS
-
-This patch add HDP PHY Controller related nodes on the LS1028AQDS.
-
-Signed-off-by: Alison Wang <alison.wang@nxp.com>
-Signed-off-by: Wen He <wen.he_1@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-@@ -248,3 +248,15 @@
- &sata {
- 	status = "okay";
- };
-+
-+&hdptx0 {
-+	fsl,no_edid;
-+	resolution = "3840x2160@60",
-+		   "1920x1080@60",
-+		   "1280x720@60",
-+		   "720x480@60";
-+	lane_mapping = <0x4e>;
-+	edp_link_rate = <0x6>;
-+	edp_num_lanes = <0x4>;
-+	status = "okay";
-+};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0074-arm64-dts-fsl-ls1028a-Add-Felix-switch-port-DT-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0074-arm64-dts-fsl-ls1028a-Add-Felix-switch-port-DT-node.patch
deleted file mode 100644
index 3ed283edfd..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0074-arm64-dts-fsl-ls1028a-Add-Felix-switch-port-DT-node.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From f5f011742b6ec9ad1db54de9e8296f1d5a3ede8a Mon Sep 17 00:00:00 2001
-From: Claudiu Manoil <claudiu.manoil@nxp.com>
-Date: Fri, 14 Jun 2019 19:24:27 +0300
-Subject: [PATCH] arm64: dts: fsl: ls1028a: Add Felix switch port DT node
-
-Add the switch device node, available on PF5, so that the
-switch port sub-nodes (net devices) can be linked to
-corresponding board specific phy nodes (external ports) or
-have their link mode defined (internal ports).
-The switch device features 6 ports, 4 with external links
-and 2 internally facing to the ls1028a SoC and connected via
-fixed links to 2 internal enetc ethernet contoller ports.
-Add the corresponding enetc internal port device nodes,
-mapped to PF2 and PF6 PCIe functions.
-And don't forget to enable the 4MB BAR4 in the root complex
-ECAM space, where the switch registers are mapped.
-
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 58 +++++++++++++++++++++++++-
- 1 file changed, 57 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -748,7 +748,9 @@
- 				  /* PF1: VF0-1 BAR0 - non-prefetchable memory */
- 				  0x82000000 0x0 0x00000000  0x1 0xf8210000  0x0 0x020000
- 				  /* PF1: VF0-1 BAR2 - prefetchable memory */
--				  0xc2000000 0x0 0x00000000  0x1 0xf8230000  0x0 0x020000>;
-+				  0xc2000000 0x0 0x00000000  0x1 0xf8230000  0x0 0x020000
-+				  /* BAR4 (PF5) - non-prefetchable memory */
-+				  0x82000000 0x0 0x00000000  0x1 0xfc000000  0x0 0x400000>;
- 
- 			enetc_port0: ethernet@0,0 {
- 				compatible = "fsl,enetc";
-@@ -764,12 +766,66 @@
- 				#address-cells = <1>;
- 				#size-cells = <0>;
- 			};
-+			ethernet@0,2 {
-+				compatible = "fsl,enetc";
-+				reg = <0x000200 0 0 0 0>;
-+				fixed-link {
-+					speed = <1000>;
-+					full-duplex;
-+				};
-+			};
- 			ethernet@0,4 {
- 				compatible = "fsl,enetc-ptp";
- 				reg = <0x000400 0 0 0 0>;
- 				clocks = <&clockgen 2 3>;
- 				little-endian;
- 			};
-+			switch@0,5 {
-+				compatible = "mscc,felix-switch";
-+				reg = <0x000500 0 0 0 0>;
-+
-+				ports {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+
-+					/* external ports */
-+					switch_port0: port@0 {
-+						reg = <0>;
-+					};
-+					switch_port1: port@1 {
-+						reg = <1>;
-+					};
-+					switch_port2: port@2 {
-+						reg = <2>;
-+					};
-+					switch_port3: port@3 {
-+						reg = <3>;
-+					};
-+					/* internal to-cpu ports */
-+					port@4 {
-+						reg = <4>;
-+						fixed-link {
-+							speed = <1000>;
-+							full-duplex;
-+						};
-+					};
-+					port@5 {
-+						reg = <5>;
-+						fixed-link {
-+							speed = <1000>;
-+							full-duplex;
-+						};
-+					};
-+				};
-+			};
-+			ethernet@0,6 {
-+				compatible = "fsl,enetc";
-+				reg = <0x000600 0 0 0 0>;
-+				fixed-link {
-+					speed = <1000>;
-+					full-duplex;
-+				};
-+			};
- 		};
- 
- 		rcpm: rcpm@1e34040 {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0075-arm64-dts-fsl-ls1028a-Enable-switch-PHYs-on-RDB.patch b/target/linux/layerscape/patches-5.4/302-dts-0075-arm64-dts-fsl-ls1028a-Enable-switch-PHYs-on-RDB.patch
deleted file mode 100644
index ff8dca6ba6..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0075-arm64-dts-fsl-ls1028a-Enable-switch-PHYs-on-RDB.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From aafb63a926b790b64a5ed83377f07b90ec7ba7c0 Mon Sep 17 00:00:00 2001
-From: Claudiu Manoil <claudiu.manoil@nxp.com>
-Date: Thu, 20 Jun 2019 19:53:55 +0300
-Subject: [PATCH] arm64: dts: fsl: ls1028a: Enable switch PHYs on RDB
-
-Just link the switch PHY nodes to the central MDIO
-controller PCIe endpoint node on ls1028 (implemented
-as PF3) so that PHYs are configurable via MDIO.
-
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 39 +++++++++++++++++++++++
- 1 file changed, 39 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-@@ -208,6 +208,45 @@
- 	status = "disabled";
- };
- 
-+&enetc_mdio_pf3 {
-+	qsgmii_phy1: ethernet-phy@4 {
-+		reg = <0x10>;
-+	};
-+
-+	qsgmii_phy2: ethernet-phy@5 {
-+		reg = <0x11>;
-+	};
-+
-+	qsgmii_phy3: ethernet-phy@6 {
-+		reg = <0x12>;
-+	};
-+
-+	qsgmii_phy4: ethernet-phy@7 {
-+		reg = <0x13>;
-+	};
-+};
-+
-+/* l2switch ports */
-+&switch_port0 {
-+	phy-handle = <&qsgmii_phy1>;
-+	phy-connection-type = "qsgmii";
-+};
-+
-+&switch_port1 {
-+	phy-handle = <&qsgmii_phy2>;
-+	phy-connection-type = "qsgmii";
-+};
-+
-+&switch_port2 {
-+	phy-handle = <&qsgmii_phy3>;
-+	phy-connection-type = "qsgmii";
-+};
-+
-+&switch_port3 {
-+	phy-handle = <&qsgmii_phy4>;
-+	phy-connection-type = "qsgmii";
-+};
-+
- &sai4 {
- 	status = "okay";
- };
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0076-arm64-dts-ls1028a-support-Felix-PF5-INTB-interrupt.patch b/target/linux/layerscape/patches-5.4/302-dts-0076-arm64-dts-ls1028a-support-Felix-PF5-INTB-interrupt.patch
deleted file mode 100644
index 2fd0819014..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0076-arm64-dts-ls1028a-support-Felix-PF5-INTB-interrupt.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 28aa7c7f0da70b7410926ec5f5737e2b78e0cdfa Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Thu, 18 Jul 2019 15:26:03 +0800
-Subject: [PATCH] arm64: dts: ls1028a: support Felix/PF5 INTB interrupt
-
-The INTB interrupt includes,
-- PTP timestamp ready in timestamp FIFO
-- TSN Preemption
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -730,7 +730,6 @@
- 			reg = <0x01 0xf0000000 0x0 0x100000>;
- 			#address-cells = <3>;
- 			#size-cells = <2>;
--			#interrupt-cells = <1>;
- 			msi-parent = <&its>;
- 			device_type = "pci";
- 			bus-range = <0x0 0x0>;
-@@ -783,6 +782,8 @@
- 			switch@0,5 {
- 				compatible = "mscc,felix-switch";
- 				reg = <0x000500 0 0 0 0>;
-+				/* IEP INT_B */
-+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- 
- 				ports {
- 					#address-cells = <1>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0077-arm64-dts-ls1028a-Add-ethernet-property-for-l2switch.patch b/target/linux/layerscape/patches-5.4/302-dts-0077-arm64-dts-ls1028a-Add-ethernet-property-for-l2switch.patch
deleted file mode 100644
index 9589af90ea..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0077-arm64-dts-ls1028a-Add-ethernet-property-for-l2switch.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 51efcd436c30e7085b36264771edce03316013d1 Mon Sep 17 00:00:00 2001
-From: Claudiu Manoil <claudiu.manoil@nxp.com>
-Date: Thu, 1 Aug 2019 19:44:00 +0300
-Subject: [PATCH] arm64: dts: ls1028a: Add ethernet property for l2switch CPU
- port
-
-This enables the CPU traffic for the l2 switch (aka the
-CPU frame injection/ extraction feature).
-
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -812,6 +812,7 @@
- 					};
- 					port@5 {
- 						reg = <5>;
-+						ethernet = <&enetc_port3>;
- 						fixed-link {
- 							speed = <1000>;
- 							full-duplex;
-@@ -819,7 +820,7 @@
- 					};
- 				};
- 			};
--			ethernet@0,6 {
-+			enetc_port3: ethernet@0,6 {
- 				compatible = "fsl,enetc";
- 				reg = <0x000600 0 0 0 0>;
- 				fixed-link {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0078-arm64-dts-fix-endianness-of-rcpm.patch b/target/linux/layerscape/patches-5.4/302-dts-0078-arm64-dts-fix-endianness-of-rcpm.patch
deleted file mode 100644
index 0f57b17f3d..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0078-arm64-dts-fix-endianness-of-rcpm.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From fdba7c7bc334f72bd8641bbd63f3596ba68650c1 Mon Sep 17 00:00:00 2001
-From: Biwen Li <biwen.li@nxp.com>
-Date: Thu, 8 Aug 2019 12:13:02 +0800
-Subject: [PATCH] arm64: dts: fix endianness of rcpm
-
-Add little-endian property of rcpm for ls1028a,ls1088a,ls208xa
-
-Signed-off-by: Biwen Li <biwen.li@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 1 +
- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 1 +
- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 1 +
- 3 files changed, 3 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -834,6 +834,7 @@
- 			compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
- 			reg = <0x0 0x1e34040 0x0 0x1c>;
- 			#fsl,rcpm-wakeup-cells = <7>;
-+			little-endian;
- 		};
- 
- 		ftm_alarm0: timer@2800000 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-@@ -792,6 +792,7 @@
- 			compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
- 			reg = <0x0 0x1e34040 0x0 0x18>;
- 			#fsl,rcpm-wakeup-cells = <6>;
-+			little-endian;
- 		};
- 
- 		ftm_alarm0: timer@2800000 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-@@ -761,6 +761,7 @@
- 			compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
- 			reg = <0x0 0x1e34040 0x0 0x18>;
- 			#fsl,rcpm-wakeup-cells = <6>;
-+			little-endian;
- 		};
- 
- 		ftm_alarm0: timer@2800000 {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0079-arm64-dts-ls1028a-Fix-interrupt-map-property-of-PCIe.patch b/target/linux/layerscape/patches-5.4/302-dts-0079-arm64-dts-ls1028a-Fix-interrupt-map-property-of-PCIe.patch
deleted file mode 100644
index 9f1fcc6a60..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0079-arm64-dts-ls1028a-Fix-interrupt-map-property-of-PCIe.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From e41ad4213ce6742646c9dfed661289e69d5af5c1 Mon Sep 17 00:00:00 2001
-From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-Date: Fri, 2 Aug 2019 16:42:53 +0800
-Subject: [PATCH] arm64: dts: ls1028a: Fix interrupt-map property of PCIe nodes
-
-The current interrupt-map entries lost the 'parent unit address',
-it will result in fail to allocate legacy INTx interrupts.
-
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -693,10 +693,10 @@
- 			msi-parent = <&its>;
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 7>;
--			interrupt-map = <0000 0 0 1 &gic GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
--					<0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
--					<0000 0 0 3 &gic GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
--					<0000 0 0 4 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- 			status = "disabled";
- 		};
- 
-@@ -718,10 +718,10 @@
- 			msi-parent = <&its>;
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 7>;
--			interrupt-map = <0000 0 0 1 &gic GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
--					<0000 0 0 2 &gic GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
--					<0000 0 0 3 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
--					<0000 0 0 4 &gic GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-+					<0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- 			status = "disabled";
- 		};
- 
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0080-arm64-dts-ls1028a-rdb-enable-emmc-hs400-mode.patch b/target/linux/layerscape/patches-5.4/302-dts-0080-arm64-dts-ls1028a-rdb-enable-emmc-hs400-mode.patch
deleted file mode 100644
index 3528fc895e..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0080-arm64-dts-ls1028a-rdb-enable-emmc-hs400-mode.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From f1f32315bcb6b50e9af701d4504c2cfa11823c98 Mon Sep 17 00:00:00 2001
-From: Yinbo Zhu <yinbo.zhu@nxp.com>
-Date: Tue, 13 Aug 2019 17:01:44 +0800
-Subject: [PATCH] arm64: dts: ls1028a-rdb: enable emmc hs400 mode
-
-This patch is to enable emmc hs400 mode for ls1028ardb
-
-Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-@@ -93,6 +93,8 @@
- 
- &esdhc1 {
- 	mmc-hs200-1_8v;
-+	mmc-hs400-1_8v;
-+	bus-width = <8>;
- 	status = "okay";
- };
- 
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0081-arm64-dts-lx2160a-add-ftm_alarm0-DT-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0081-arm64-dts-lx2160a-add-ftm_alarm0-DT-node.patch
deleted file mode 100644
index e8db9f32d0..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0081-arm64-dts-lx2160a-add-ftm_alarm0-DT-node.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 31301e26a9d72fe2e4ecdf0999e9fda4c6832188 Mon Sep 17 00:00:00 2001
-From: Biwen Li <biwen.li@nxp.com>
-Date: Thu, 1 Aug 2019 12:34:33 +0800
-Subject: [PATCH] arm64: dts: lx2160a: add ftm_alarm0 DT node
-
-The patch adds ftm_alarm0 DT node for Soc LX2160A
-FlexTimer1 module is used to wakeup the system in deep sleep
-
-Signed-off-by: Biwen Li <biwen.li@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -15,6 +15,10 @@
- 	#address-cells = <2>;
- 	#size-cells = <2>;
- 
-+	aliases {
-+		rtc1 = &ftm_alarm0;
-+	};
-+
- 	cpus {
- 		#address-cells = <1>;
- 		#size-cells = <0>;
-@@ -769,6 +773,20 @@
- 			timeout-sec = <30>;
- 		};
- 
-+		rcpm: rcpm@1e34040 {
-+			compatible = "fsl,lx2160a-rcpm", "fsl,qoriq-rcpm-2.1+";
-+			reg = <0x0 0x1e34040 0x0 0x1c>;
-+			#fsl,rcpm-wakeup-cells = <7>;
-+			little-endian;
-+		};
-+
-+		ftm_alarm0: timer@2800000 {
-+			compatible = "fsl,lx2160a-ftm-alarm";
-+			reg = <0x0 0x2800000 0x0 0x10000>;
-+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
-+			interrupts = <0 44 4>;
-+		};
-+
- 		usb0: usb@3100000 {
- 			compatible = "snps,dwc3";
- 			reg = <0x0 0x3100000 0x0 0x10000>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0082-arm64-dts-lx2160a-add-tmu-device-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0082-arm64-dts-lx2160a-add-tmu-device-node.patch
deleted file mode 100644
index 3e3a67919e..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0082-arm64-dts-lx2160a-add-tmu-device-node.patch
+++ /dev/null
@@ -1,293 +0,0 @@
-From f6233242d21bb4cb973a7dfc61dcfbf6d9a5d22b Mon Sep 17 00:00:00 2001
-From: Yuantian Tang <andy.tang@nxp.com>
-Date: Mon, 2 Sep 2019 17:45:19 +0800
-Subject: [PATCH] arm64: dts: lx2160a: add tmu device node
-
-Add the TMU (Thermal Monitoring Unit) device node to enable
-TMU feature.
-
-Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 108 +++++++++++++++++++++----
- 1 file changed, 92 insertions(+), 16 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -6,6 +6,7 @@
- 
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/thermal/thermal.h>
- 
- /memreserve/ 0x80000000 0x00010000;
- 
-@@ -24,7 +25,7 @@
- 		#size-cells = <0>;
- 
- 		// 8 clusters having 2 Cortex-A72 cores each
--		cpu@0 {
-+		cpu0: cpu@0 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -38,9 +39,10 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster0_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
--		cpu@1 {
-+		cpu1: cpu@1 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -54,9 +56,10 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster0_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
--		cpu@100 {
-+		cpu100: cpu@100 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -70,9 +73,10 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster1_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
--		cpu@101 {
-+		cpu101: cpu@101 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -86,9 +90,10 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster1_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
--		cpu@200 {
-+		cpu200: cpu@200 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -102,9 +107,10 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster2_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
--		cpu@201 {
-+		cpu201: cpu@201 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -118,9 +124,10 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster2_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
--		cpu@300 {
-+		cpu300: cpu@300 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -134,9 +141,10 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster3_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
--		cpu@301 {
-+		cpu301: cpu@301 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -150,9 +158,10 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster3_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
--		cpu@400 {
-+		cpu400: cpu@400 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -166,9 +175,10 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster4_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
--		cpu@401 {
-+		cpu401: cpu@401 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -182,9 +192,10 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster4_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
--		cpu@500 {
-+		cpu500: cpu@500 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -198,9 +209,10 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster5_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
--		cpu@501 {
-+		cpu501: cpu@501 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -214,9 +226,10 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster5_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
--		cpu@600 {
-+		cpu600: cpu@600 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -230,9 +243,10 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster6_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
--		cpu@601 {
-+		cpu601: cpu@601 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -246,9 +260,10 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster6_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
--		cpu@700 {
-+		cpu700: cpu@700 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -262,9 +277,10 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster7_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
--		cpu@701 {
-+		cpu701: cpu@701 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a72";
- 			enable-method = "psci";
-@@ -278,6 +294,7 @@
- 			i-cache-sets = <192>;
- 			next-level-cache = <&cluster7_l2>;
- 			cpu-idle-states = <&cpu_pw15>;
-+			#cooling-cells = <2>;
- 		};
- 
- 		cluster0_l2: l2-cache0 {
-@@ -422,6 +439,51 @@
- 		clock-output-names = "sysclk";
- 	};
- 
-+	thermal-zones {
-+		core_thermal1: core-thermal1 {
-+			polling-delay-passive = <1000>;
-+			polling-delay = <5000>;
-+			thermal-sensors = <&tmu 0>;
-+
-+			trips {
-+				core_cluster_alert: core-cluster-alert {
-+					temperature = <85000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+
-+				core_cluster_crit: core-cluster-crit {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+			};
-+
-+			cooling-maps {
-+				map0 {
-+					trip = <&core_cluster_alert>;
-+					cooling-device =
-+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+						<&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+						<&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+						<&cpu200 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+						<&cpu201 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+						<&cpu300 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+						<&cpu301 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+						<&cpu400 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+						<&cpu401 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+						<&cpu500 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+						<&cpu501 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+						<&cpu600 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+						<&cpu601 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+						<&cpu700 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+						<&cpu701 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+				};
-+			};
-+		};
-+	};
-+
- 	soc {
- 		compatible = "simple-bus";
- 		#address-cells = <2>;
-@@ -689,6 +751,20 @@
- 			status = "disabled";
- 		};
- 
-+		tmu: tmu@1f80000 {
-+			compatible = "fsl,qoriq-tmu";
-+			reg = <0x0 0x1f80000 0x0 0x10000>;
-+			interrupts = <0 23 0x4>;
-+			fsl,tmu-range = <0x800000E6 0x8001017D>;
-+			fsl,tmu-calibration =
-+				/* Calibration data group 1 */
-+				<0x00000000 0x00000035
-+				/* Calibration data group 2 */
-+				0x00010001 0x00000154>;
-+			little-endian;
-+			#thermal-sensor-cells = <1>;
-+		};
-+
- 		uart0: serial@21c0000 {
- 			compatible = "arm,sbsa-uart","arm,pl011";
- 			reg = <0x0 0x21c0000 0x0 0x1000>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0084-arm64-dts-ls1028a-define-networking-options-for-QDS.patch b/target/linux/layerscape/patches-5.4/302-dts-0084-arm64-dts-ls1028a-define-networking-options-for-QDS.patch
deleted file mode 100644
index 8680f3490b..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0084-arm64-dts-ls1028a-define-networking-options-for-QDS.patch
+++ /dev/null
@@ -1,355 +0,0 @@
-From 0c767bcfe1b4d940f2889820f12d278cbba764b5 Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Tue, 27 Aug 2019 15:12:00 +0300
-Subject: [PATCH] arm64: dts: ls1028a: define networking options for QDS
-
-Defines connectivity for a few serdes protocol combinations (85xx, 65xx,
-13xx, 9999, 7777).
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- .../boot/dts/freescale/fsl-ls1028a-qds-1xxx.dtsi   | 20 ++++++++
- .../boot/dts/freescale/fsl-ls1028a-qds-6xxx.dtsi   | 20 ++++++++
- .../boot/dts/freescale/fsl-ls1028a-qds-7777.dtsi   | 56 ++++++++++++++++++++
- .../boot/dts/freescale/fsl-ls1028a-qds-8xxx.dtsi   | 19 +++++++
- .../boot/dts/freescale/fsl-ls1028a-qds-9999.dtsi   | 60 ++++++++++++++++++++++
- .../boot/dts/freescale/fsl-ls1028a-qds-x3xx.dtsi   | 48 +++++++++++++++++
- .../boot/dts/freescale/fsl-ls1028a-qds-x5xx.dtsi   | 44 ++++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts  | 27 ++++++++++
- 8 files changed, 294 insertions(+)
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-1xxx.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-6xxx.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-8xxx.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x3xx.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x5xx.dtsi
-
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-1xxx.dtsi
-@@ -0,0 +1,20 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree Include file for LS1028A QDS board, serdes 1xxx
-+ *
-+ * Copyright 2019 NXP
-+ *
-+ */
-+
-+&mdio_slot1 {
-+	slot1_sgmii: ethernet-phy@2 {
-+		/* AQR112 */
-+		reg = <0x2>;
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+	};
-+};
-+
-+&enetc_port0 {
-+	phy-handle = <&slot1_sgmii>;
-+	phy-connection-type = "usxgmii";
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-6xxx.dtsi
-@@ -0,0 +1,20 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree Include file for LS1028A QDS board, serdes 6xxx
-+ *
-+ * Copyright 2019 NXP
-+ *
-+ */
-+
-+&mdio_slot1 {
-+	slot1_sgmii: ethernet-phy@2 {
-+		/* AQR112 */
-+		reg = <0x2>;
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+	};
-+};
-+
-+&enetc_port0 {
-+	phy-handle = <&slot1_sgmii>;
-+	phy-connection-type = "2500base-x";
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtsi
-@@ -0,0 +1,56 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree Include file for LS1028A QDS board, serdes 9999
-+ *
-+ * Copyright 2019 NXP
-+ *
-+ */
-+
-+&mdio_slot1 {
-+	/* two ports on AQR412 */
-+	slot1_sxgmii2: ethernet-phy@2 {
-+		reg = <0x2>;
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+	};
-+	slot1_sxgmii3: ethernet-phy@3 {
-+		reg = <0x3>;
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+	};
-+};
-+
-+&mdio_slot2 {
-+	slot2_sxgmii0: ethernet-phy@2 {
-+		/* AQR112 */
-+		reg = <0x2>;
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+	};
-+};
-+
-+&mdio_slot3 {
-+	slot3_sxgmii0: ethernet-phy@2 {
-+		/* AQR112 */
-+		reg = <0x2>;
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+	};
-+};
-+
-+/* l2switch ports */
-+&switch_port0 {
-+	phy-handle = <&slot1_sxgmii2>;
-+	phy-connection-type = "2500base-x";
-+};
-+
-+&switch_port1 {
-+	phy-handle = <&slot2_sxgmii0>;
-+	phy-connection-type = "2500base-x";
-+};
-+
-+&switch_port2 {
-+	phy-handle = <&slot3_sxgmii0>;
-+	phy-connection-type = "2500base-x";
-+};
-+
-+&switch_port3 {
-+	phy-handle = <&slot1_sxgmii3>;
-+	phy-connection-type = "2500base-x";
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-8xxx.dtsi
-@@ -0,0 +1,19 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree Include file for LS1028A QDS board, serdes 8xxx
-+ *
-+ * Copyright 2019 NXP
-+ *
-+ */
-+
-+&mdio_slot1 {
-+	slot1_sgmii: ethernet-phy@1c {
-+		/* 1st port on VSC8234 */
-+		reg = <0x1c>;
-+	};
-+};
-+
-+&enetc_port0 {
-+	phy-handle = <&slot1_sgmii>;
-+	phy-connection-type = "sgmii";
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtsi
-@@ -0,0 +1,60 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree Include file for LS1028A QDS board, serdes 9999
-+ *
-+ * Copyright 2019 NXP
-+ *
-+ */
-+
-+&mdio_slot1 {
-+	/* VSC8234 */
-+	slot1_sgmii0: ethernet-phy@1c {
-+		reg = <0x1c>;
-+	};
-+	slot1_sgmii1: ethernet-phy@1d {
-+		reg = <0x1d>;
-+	};
-+	slot1_sgmii2: ethernet-phy@1e {
-+		reg = <0x1e>;
-+	};
-+	slot1_sgmii3: ethernet-phy@1f {
-+		reg = <0x1f>;
-+	};
-+};
-+
-+&mdio_slot2 {
-+	/* VSC8234 */
-+	slot2_sgmii0: ethernet-phy@1c {
-+		reg = <0x1c>;
-+	};
-+	slot2_sgmii1: ethernet-phy@1d {
-+		reg = <0x1d>;
-+	};
-+	slot2_sgmii2: ethernet-phy@1e {
-+		reg = <0x1e>;
-+	};
-+	slot2_sgmii3: ethernet-phy@1f {
-+		reg = <0x1f>;
-+	};
-+};
-+
-+/* l2switch ports */
-+&switch_port0 {
-+	phy-handle = <&slot1_sgmii0>;
-+	phy-connection-type = "sgmii";
-+};
-+
-+&switch_port1 {
-+	phy-handle = <&slot2_sgmii0>;
-+	phy-connection-type = "sgmii";
-+};
-+
-+&switch_port2 {
-+	phy-handle = <&slot1_sgmii2>;
-+	phy-connection-type = "sgmii";
-+};
-+
-+&switch_port3 {
-+	phy-handle = <&slot1_sgmii3>;
-+	phy-connection-type = "sgmii";
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x3xx.dtsi
-@@ -0,0 +1,48 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree Include file for LS1028A QDS board, serdes x3xx
-+ *
-+ * Copyright 2019 NXP
-+ *
-+ */
-+
-+&mdio_slot2 {
-+	/* 4 ports on AQR412 */
-+	slot2_qsgmii0: ethernet-phy@0 {
-+		reg = <0x0>;
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+	};
-+	slot2_qsgmii1: ethernet-phy@1 {
-+		reg = <0x1>;
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+	};
-+	slot2_qsgmii2: ethernet-phy@2 {
-+		reg = <0x2>;
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+	};
-+	slot2_qsgmii3: ethernet-phy@3 {
-+		reg = <0x3>;
-+		compatible = "ethernet-phy-ieee802.3-c45";
-+	};
-+};
-+
-+/* l2switch ports */
-+&switch_port0 {
-+	phy-handle = <&slot2_qsgmii0>;
-+	phy-connection-type = "usxgmii";
-+};
-+
-+&switch_port1 {
-+	phy-handle = <&slot2_qsgmii1>;
-+	phy-connection-type = "usxgmii";
-+};
-+
-+&switch_port2 {
-+	phy-handle = <&slot2_qsgmii2>;
-+	phy-connection-type = "usxgmii";
-+};
-+
-+&switch_port3 {
-+	phy-handle = <&slot2_qsgmii3>;
-+	phy-connection-type = "usxgmii";
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x5xx.dtsi
-@@ -0,0 +1,44 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree Include file for LS1028A QDS board, serdes x5xx
-+ *
-+ * Copyright 2019 NXP
-+ *
-+ */
-+
-+&mdio_slot2 {
-+	/* 4 ports on VSC8514 */
-+	slot2_qsgmii0: ethernet-phy@8 {
-+		reg = <0x8>;
-+	};
-+	slot2_qsgmii1: ethernet-phy@9 {
-+		reg = <0x9>;
-+	};
-+	slot2_qsgmii2: ethernet-phy@a {
-+		reg = <0xa>;
-+	};
-+	slot2_qsgmii3: ethernet-phy@b {
-+		reg = <0xb>;
-+	};
-+};
-+
-+/* l2switch ports */
-+&switch_port0 {
-+	phy-handle = <&slot2_qsgmii0>;
-+	phy-connection-type = "qsgmii";
-+};
-+
-+&switch_port1 {
-+	phy-handle = <&slot2_qsgmii1>;
-+	phy-connection-type = "qsgmii";
-+};
-+
-+&switch_port2 {
-+	phy-handle = <&slot2_qsgmii2>;
-+	phy-connection-type = "qsgmii";
-+};
-+
-+&switch_port3 {
-+	phy-handle = <&slot2_qsgmii3>;
-+	phy-connection-type = "qsgmii";
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-@@ -104,6 +104,30 @@
- 				reg = <5>;
- 			};
- 		};
-+
-+		mdio_slot1: mdio@4 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <4>;
-+		};
-+
-+		mdio_slot2: mdio@5 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <5>;
-+		};
-+
-+		mdio_slot3: mdio@6 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <6>;
-+		};
-+
-+		mdio_slot4: mdio@7 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <7>;
-+		};
- 	};
- };
- 
-@@ -260,3 +284,6 @@
- 	edp_num_lanes = <0x4>;
- 	status = "okay";
- };
-+
-+#include "fsl-ls1028a-qds-8xxx.dtsi"
-+#include "fsl-ls1028a-qds-x5xx.dtsi"
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0086-usb-dwc3-enable-otg-mode-for-dwc3-usb-ip-on-layersca.patch b/target/linux/layerscape/patches-5.4/302-dts-0086-usb-dwc3-enable-otg-mode-for-dwc3-usb-ip-on-layersca.patch
deleted file mode 100644
index 050c5d5137..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0086-usb-dwc3-enable-otg-mode-for-dwc3-usb-ip-on-layersca.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 411bee5b3e729e4dd691051e13f77dfb994e0da8 Mon Sep 17 00:00:00 2001
-From: Yinbo Zhu <yinbo.zhu@nxp.com>
-Date: Mon, 9 Sep 2019 15:57:52 +0800
-Subject: [PATCH] usb: dwc3: enable otg mode for dwc3 usb ip on layerscape
-
-layerscape otg function should be supported HNP SRP and ADP protocol
-accroing to rm doc, but dwc3 code not realize it and use id pin to
-detect who is host or device(0 is host 1 is device) this patch is to
-enable OTG mode on ls1028ardb ls1088ardb and ls1046ardb in dts
-
-Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 4 ++++
- arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++++
- arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 1 +
- 3 files changed, 9 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-@@ -98,6 +98,10 @@
- 	status = "okay";
- };
- 
-+&usb1 {
-+	dr_mode = "otg";
-+};
-+
- &i2c0 {
- 	status = "okay";
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
-@@ -44,6 +44,10 @@
- 	sd-uhs-sdr12;
- };
- 
-+&usb1 {
-+	dr_mode = "otg";
-+};
-+
- &i2c0 {
- 	status = "okay";
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
-@@ -120,6 +120,7 @@
- };
- 
- &usb1 {
-+	dr_mode = "otg";
- 	status = "okay";
- };
- 
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0087-arm-dts-ls1021a-fix-that-FlexTimer-cannot-wakeup-sys.patch b/target/linux/layerscape/patches-5.4/302-dts-0087-arm-dts-ls1021a-fix-that-FlexTimer-cannot-wakeup-sys.patch
deleted file mode 100644
index cebd74524b..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0087-arm-dts-ls1021a-fix-that-FlexTimer-cannot-wakeup-sys.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From c221e05b50ca68daf5a20069ee1928171ef43bae Mon Sep 17 00:00:00 2001
-From: Biwen Li <biwen.li@nxp.com>
-Date: Sat, 14 Sep 2019 12:59:36 +0800
-Subject: [PATCH] arm: dts: ls1021a: fix that FlexTimer cannot wakeup system in
- deep sleep
-
-The patch fixes a bug that FlexTimer cannot
-wakeup system in deep sleep.
-
-Signed-off-by: Biwen Li <biwen.li@nxp.com>
----
- arch/arm/boot/dts/ls1021a.dtsi | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/arm/boot/dts/ls1021a.dtsi
-+++ b/arch/arm/boot/dts/ls1021a.dtsi
-@@ -965,6 +965,12 @@
- 			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
- 			reg = <0x0 0x1ee2140 0x0 0x8>;
- 			#fsl,rcpm-wakeup-cells = <2>;
-+
-+			/*
-+			 * The second and third entry compose an alt offset
-+			 * address for IPPDEXPCR1(SCFG_SPARECR8)
-+			 */
-+			fsl,ippdexpcr1-alt-addr = <&scfg 0x0 0x51c>;
- 		};
- 
- 		ftm_alarm0: timer0@29d0000 {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0088-arm64-dts-ls1028a-fix-dwc-pci-over-smmu.patch b/target/linux/layerscape/patches-5.4/302-dts-0088-arm64-dts-ls1028a-fix-dwc-pci-over-smmu.patch
deleted file mode 100644
index 82d6b4c043..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0088-arm64-dts-ls1028a-fix-dwc-pci-over-smmu.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 127b30b66c3b48ee717ed7335987334e8dc769b5 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 1 Oct 2019 13:47:11 +0300
-Subject: [PATCH] arm64: dts: ls1028a: fix dwc pci over smmu
-
-In order for the dwc controller to work with SMMU it needs the
-bootloader to fixup it's iommu-map property. In the current
-implementation to bootloader will not perform the fixup if the
-property is not already in the device tree with dummy fields.
-Add it to fix DWC PCI over SMMU.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -687,6 +687,7 @@
- 			#size-cells = <2>;
- 			device_type = "pci";
- 			dma-coherent;
-+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
- 			bus-range = <0x0 0xff>;
- 			ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000   /* downstream I/O */
- 				  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-@@ -712,6 +713,7 @@
- 			#size-cells = <2>;
- 			device_type = "pci";
- 			dma-coherent;
-+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
- 			bus-range = <0x0 0xff>;
- 			ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000   /* downstream I/O */
- 				  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0089-arm64-dts-ls1028a-Update-the-clock-providers-for-the.patch b/target/linux/layerscape/patches-5.4/302-dts-0089-arm64-dts-ls1028a-Update-the-clock-providers-for-the.patch
deleted file mode 100644
index 8c2d085665..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0089-arm64-dts-ls1028a-Update-the-clock-providers-for-the.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From e13c24ef2f068e651b9996922a08843d53513cab Mon Sep 17 00:00:00 2001
-From: Wen He <wen.he_1@nxp.com>
-Date: Fri, 20 Sep 2019 16:34:18 +0800
-Subject: [PATCH] arm64: dts: ls1028a: Update the clock providers for the Mali
- DP500
-
-In order to maximise performance of the LCD Controller's 64-bit AXI
-bus, for any give speed bin of the device, the AXI master interface
-clock(ACLK) clock can be up to CPU_frequency/2, which is already
-capable of optimal performance. In general, ACLK is always expected
-to be equal to CPU_frequency/2. APB slave interface clock(PCLK) and
-Main processing clock(PCLK) both are tied to the same clock as ACLK.
-
-This change followed the LS1028A Architecture Specification Manual.
-
-Signed-off-by: Wen He <wen.he_1@nxp.com>
-Acked-by: Li Yang <leoyang.li@nxp.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 17 ++---------------
- 1 file changed, 2 insertions(+), 15 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -90,20 +90,6 @@
- 		clocks = <&osc_27m>;
- 	};
- 
--	aclk: clock-axi {
--		compatible = "fixed-clock";
--		#clock-cells = <0>;
--		clock-frequency = <650000000>;
--		clock-output-names= "aclk";
--	};
--
--	pclk: clock-apb {
--		compatible = "fixed-clock";
--		#clock-cells = <0>;
--		clock-frequency = <650000000>;
--		clock-output-names= "pclk";
--	};
--
- 	reboot {
- 		compatible ="syscon-reboot";
- 		regmap = <&rst>;
-@@ -860,7 +846,8 @@
- 		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
- 			     <0 223 IRQ_TYPE_LEVEL_HIGH>;
- 		interrupt-names = "DE", "SE";
--		clocks = <&dpclk 0>, <&aclk>, <&aclk>, <&pclk>;
-+		clocks = <&dpclk 0>, <&clockgen 2 2>, <&clockgen 2 2>,
-+			 <&clockgen 2 2>;
- 		clock-names = "pxlclk", "mclk", "aclk", "pclk";
- 		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
- 		arm,malidp-arqos-value = <0xd000d000>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0090-arm64-dts-ls1028a-Update-clock-cells-of-dpclk-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0090-arm64-dts-ls1028a-Update-clock-cells-of-dpclk-node.patch
deleted file mode 100644
index b84ba01fb5..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0090-arm64-dts-ls1028a-Update-clock-cells-of-dpclk-node.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 7e64c4e922cddea72dacd3f0d8f395d9182ea5bc Mon Sep 17 00:00:00 2001
-From: Wen He <wen.he_1@nxp.com>
-Date: Mon, 14 Oct 2019 15:13:27 +0800
-Subject: [PATCH] arm64: dts: ls1028a: Update #clock-cells of dpclk node
-
-Update the property #clock-cells = <1> to #clock-cells = <0> of the
-dpclk, since the Display output pixel clock driver provides single
-clock output.
-
-Signed-off-by: Wen He <wen.he_1@nxp.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -86,7 +86,7 @@
- 	dpclk: clock-controller@f1f0000 {
- 		compatible = "fsl,ls1028a-plldig";
- 		reg = <0x0 0xf1f0000 0x0 0xffff>;
--		#clock-cells = <1>;
-+		#clock-cells = <0>;
- 		clocks = <&osc_27m>;
- 	};
- 
-@@ -846,7 +846,7 @@
- 		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
- 			     <0 223 IRQ_TYPE_LEVEL_HIGH>;
- 		interrupt-names = "DE", "SE";
--		clocks = <&dpclk 0>, <&clockgen 2 2>, <&clockgen 2 2>,
-+		clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>,
- 			 <&clockgen 2 2>;
- 		clock-names = "pxlclk", "mclk", "aclk", "pclk";
- 		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0091-arm64-dts-ls1028a-Add-properties-for-HD-Display-cont.patch b/target/linux/layerscape/patches-5.4/302-dts-0091-arm64-dts-ls1028a-Add-properties-for-HD-Display-cont.patch
deleted file mode 100644
index 07620e57c9..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0091-arm64-dts-ls1028a-Add-properties-for-HD-Display-cont.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From e0afa16cad94b26e13d673647b781dd336cb30bc Mon Sep 17 00:00:00 2001
-From: Wen He <wen.he_1@nxp.com>
-Date: Mon, 14 Oct 2019 14:25:42 +0800
-Subject: [PATCH] arm64: dts: ls1028a: Add properties for HD Display controller
- node
-
-The HD Display controller includes DP TX CTRL and DPHY, their offers
-multi-protocol support of standards such as DisplayPort and eDP, with
-one of these standards supported at a time.
-
-This patch enables the HD Display controller driver on the LS1028A.
-
-Signed-off-by: Wen He <wen.he_1@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -854,7 +854,23 @@
- 
- 		port {
- 			dp0_out: endpoint {
-+				remote-endpoint = <&dp1_out>;
-+			};
-+		};
-+	};
- 
-+	hdptx0: display@f200000 {
-+		compatible = "cdn,ls1028a-dp";
-+		reg = <0x0 0xf200000 0x0 0xfffff>;
-+		interrupts = <0 221 IRQ_TYPE_LEVEL_HIGH>;
-+		clocks = <&clockgen 2 2>, <&clockgen 2 2>, <&clockgen 2 2>,
-+			 <&clockgen 2 2>, <&clockgen 2 2>, <&dpclk>;
-+		clock-names = "clk_core", "pclk", "sclk",
-+			      "cclk", "clk_vif", "clk_pxl";
-+
-+		port {
-+			dp1_out: endpoint {
-+				remote-endpoint = <&dp0_out>;
- 			};
- 		};
- 	};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0092-arm64-dts-ls1028a-Add-DP-DT-nodes.patch b/target/linux/layerscape/patches-5.4/302-dts-0092-arm64-dts-ls1028a-Add-DP-DT-nodes.patch
deleted file mode 100644
index c3b750ee8a..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0092-arm64-dts-ls1028a-Add-DP-DT-nodes.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 4de1f70135fa4b44eb5016e36ba08ffd0bc62414 Mon Sep 17 00:00:00 2001
-From: Wen He <wen.he_1@nxp.com>
-Date: Wed, 27 Nov 2019 17:48:17 +0800
-Subject: [PATCH] arm64: dts: ls1028a: Add DP DT nodes
-
-Add DP DT nodes for configure and enable the HD Display
-controller on LS1028ARDB and LS1028AQDS boards.
-
-Signed-off-by: Wen He <wen.he_1@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 9 +--------
- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 9 +--------
- 2 files changed, 2 insertions(+), 16 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-@@ -274,14 +274,7 @@
- };
- 
- &hdptx0 {
--	fsl,no_edid;
--	resolution = "3840x2160@60",
--		   "1920x1080@60",
--		   "1280x720@60",
--		   "720x480@60";
--	lane_mapping = <0x4e>;
--	edp_link_rate = <0x6>;
--	edp_num_lanes = <0x4>;
-+	lane-mapping = <0x4e>;
- 	status = "okay";
- };
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-@@ -262,13 +262,6 @@
- };
- 
- &hdptx0 {
--	fsl,no_edid;
--	resolution = "3840x2160@60",
--		   "1920x1080@60",
--		   "1280x720@60",
--		   "720x480@60";
--	lane_mapping = <0x4e>;
--	edp_link_rate = <0x6>;
--	edp_num_lanes = <0x4>;
-+	lane-mapping = <0x4e>;
- 	status = "okay";
- };
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0093-arm64-dts-fsl-Specify-phy-mode-for-CPU-ports.patch b/target/linux/layerscape/patches-5.4/302-dts-0093-arm64-dts-fsl-Specify-phy-mode-for-CPU-ports.patch
deleted file mode 100644
index cf99f33251..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0093-arm64-dts-fsl-Specify-phy-mode-for-CPU-ports.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From a55a0d71c2b1000c514f30573ced00879754f223 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Fri, 29 Nov 2019 03:07:14 +0200
-Subject: [PATCH] arm64: dts: fsl: Specify phy-mode for CPU ports
-
-PHYLINK requires that device tree nodes have a phy-mode or
-phy-connection-type property. The internal Felix ports really are
-connected to the ENETC via 2 back-to-back MACs, so the correct MII type
-is GMII (one of which is overclocked at 2.5Gbaud, but still GMII).
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -793,6 +793,8 @@
- 					/* internal to-cpu ports */
- 					port@4 {
- 						reg = <4>;
-+						phy-mode = "gmii";
-+
- 						fixed-link {
- 							speed = <1000>;
- 							full-duplex;
-@@ -801,6 +803,8 @@
- 					port@5 {
- 						reg = <5>;
- 						ethernet = <&enetc_port3>;
-+						phy-mode = "gmii";
-+
- 						fixed-link {
- 							speed = <1000>;
- 							full-duplex;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0094-arm64-dts-fsl-Drop-compatible-string-from-Felix-swit.patch b/target/linux/layerscape/patches-5.4/302-dts-0094-arm64-dts-fsl-Drop-compatible-string-from-Felix-swit.patch
deleted file mode 100644
index ff9a05d3cc..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0094-arm64-dts-fsl-Drop-compatible-string-from-Felix-swit.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 21c535326436df93fd61c9bd029b8716d1ab94d0 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Fri, 29 Nov 2019 03:10:23 +0200
-Subject: [PATCH] arm64: dts: fsl: Drop "compatible" string from Felix switch
-
-Since Felix is not a platform device but a PCI device, the "compatible"
-string serves no purpose. The device driver is found by matching the PCI
-device/vendor ID to the ENETC PF.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -768,7 +768,6 @@
- 				little-endian;
- 			};
- 			switch@0,5 {
--				compatible = "mscc,felix-switch";
- 				reg = <0x000500 0 0 0 0>;
- 				/* IEP INT_B */
- 				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0095-arm64-dts-fsl-ls1028a-Specify-that-the-Felix-port-4-.patch b/target/linux/layerscape/patches-5.4/302-dts-0095-arm64-dts-fsl-ls1028a-Specify-that-the-Felix-port-4-.patch
deleted file mode 100644
index 195f28754d..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0095-arm64-dts-fsl-ls1028a-Specify-that-the-Felix-port-4-.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 5934fa0a0708b551211f63b8d91676df346e9821 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Fri, 29 Nov 2019 03:13:00 +0200
-Subject: [PATCH] arm64: dts: fsl: ls1028a: Specify that the Felix port 4 runs
- at 2.5Gbps
-
-This is just an informative change, because all Felix MACs inside the
-LS1028A are hardwired in gigabit mode anyway.
-
-Only PHYLINK is able to understand fixed-link speeds higher than 1 Gbps.
-With PHYLIB, fixed-link interfaces are emulated as C22 PHYs by the swphy
-driver, and C22 does not specify settings for speeds higher than
-gigabit.
-
-This patch brings no functional change except for the messages printed
-during driver initialization.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -805,7 +805,7 @@
- 						phy-mode = "gmii";
- 
- 						fixed-link {
--							speed = <1000>;
-+							speed = <2500>;
- 							full-duplex;
- 						};
- 					};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0096-arm64-dts-fsl-ls1028a-Disable-eno3-and-make-swp5-the.patch b/target/linux/layerscape/patches-5.4/302-dts-0096-arm64-dts-fsl-ls1028a-Disable-eno3-and-make-swp5-the.patch
deleted file mode 100644
index a1c50bcefb..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0096-arm64-dts-fsl-ls1028a-Disable-eno3-and-make-swp5-the.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 9344f58d60a0a53ec39e7c5d75021843e859970f Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Fri, 29 Nov 2019 03:18:32 +0200
-Subject: [PATCH] arm64: dts: fsl: ls1028a: Disable eno3 and make swp5 the
- Felix CPU port
-
-This patch returns to the switch port setup from BSP 0.2, where the
-switch only had a single Ethernet connection to the CPU, via a tagging
-interface. Choose eno2 for this purpose, as it has higher bandwidth and
-also supports TSN offloads.
-
-The reason is that the switch is not able to do DSA tags on 2 CPU ports
-at the same time, and it is confusing to have so many ports with no
-clear indication which should be used for what (a "data" port and a
-"control" port).
-
-We don't revert to the BSP 0.2 RCW configuration, however. The ENETC
-port 3 is still enabled in the RCW, however it is not probed by Linux by
-default, since the large majority of use cases will not need it. For
-those that do (like originating 802.1CB traffic from the CPU), it can be
-enabled back by simply reverting this device tree change.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -753,7 +753,7 @@
- 				#address-cells = <1>;
- 				#size-cells = <0>;
- 			};
--			ethernet@0,2 {
-+			enetc_port2: ethernet@0,2 {
- 				compatible = "fsl,enetc";
- 				reg = <0x000200 0 0 0 0>;
- 				fixed-link {
-@@ -792,6 +792,7 @@
- 					/* internal to-cpu ports */
- 					port@4 {
- 						reg = <4>;
-+						ethernet = <&enetc_port2>;
- 						phy-mode = "gmii";
- 
- 						fixed-link {
-@@ -801,7 +802,6 @@
- 					};
- 					port@5 {
- 						reg = <5>;
--						ethernet = <&enetc_port3>;
- 						phy-mode = "gmii";
- 
- 						fixed-link {
-@@ -814,6 +814,8 @@
- 			enetc_port3: ethernet@0,6 {
- 				compatible = "fsl,enetc";
- 				reg = <0x000600 0 0 0 0>;
-+				status = "disabled";
-+
- 				fixed-link {
- 					speed = <1000>;
- 					full-duplex;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0097-LF-387-5-arm64-dts-layerscape-add-chip-specific-comp.patch b/target/linux/layerscape/patches-5.4/302-dts-0097-LF-387-5-arm64-dts-layerscape-add-chip-specific-comp.patch
deleted file mode 100644
index 25d66a4ba6..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0097-LF-387-5-arm64-dts-layerscape-add-chip-specific-comp.patch
+++ /dev/null
@@ -1,150 +0,0 @@
-From 4cb6a451112308b2679c567ac680bc74ab93a92a Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Fri, 22 Nov 2019 14:18:49 +0800
-Subject: [PATCH] LF-387-5 arm64: dts: layerscape: add chip-specific compatible
- string to usb nodes
-
-To allow USB dwc3 driver to conduct some chip-scpeific configuring.
-Cover all arm64 based Layerscape SoCs.
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-Reviewed-by: Jun Li <jun.li@nxp.com>
-Reviewed-by: Leo Li <leo.li@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 +-
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 6 +++---
- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 6 +++---
- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 4 ++--
- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++--
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 4 ++--
- 6 files changed, 13 insertions(+), 13 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-@@ -444,7 +444,7 @@
- 		};
- 
- 		usb0: usb3@2f00000 {
--			compatible = "snps,dwc3";
-+			compatible = "fsl,ls1012a-dwc3", "snps,dwc3";
- 			reg = <0x0 0x2f00000 0x0 0x10000>;
- 			interrupts = <0 60 0x4>;
- 			dr_mode = "host";
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -695,7 +695,7 @@
- 			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
- 
- 			usb0: usb3@2f00000 {
--				compatible = "snps,dwc3";
-+				compatible = "fsl,ls1043a-dwc3", "snps,dwc3";
- 				reg = <0x0 0x2f00000 0x0 0x10000>;
- 				interrupts = <0 60 0x4>;
- 				dr_mode = "host";
-@@ -709,7 +709,7 @@
- 			};
- 
- 			usb1: usb3@3000000 {
--				compatible = "snps,dwc3";
-+				compatible = "fsl,ls1043a-dwc3", "snps,dwc3";
- 				reg = <0x0 0x3000000 0x0 0x10000>;
- 				interrupts = <0 61 0x4>;
- 				dr_mode = "host";
-@@ -723,7 +723,7 @@
- 			};
- 
- 			usb2: usb3@3100000 {
--				compatible = "snps,dwc3";
-+				compatible = "fsl,ls1043a-dwc3", "snps,dwc3";
- 				reg = <0x0 0x3100000 0x0 0x10000>;
- 				interrupts = <0 63 0x4>;
- 				dr_mode = "host";
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-@@ -594,7 +594,7 @@
- 			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
- 
- 			usb0: usb@2f00000 {
--				compatible = "snps,dwc3";
-+				compatible = "fsl,ls1046a-dwc3", "snps,dwc3";
- 				reg = <0x0 0x2f00000 0x0 0x10000>;
- 				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- 				dr_mode = "host";
-@@ -607,7 +607,7 @@
- 			};
- 
- 			usb1: usb@3000000 {
--				compatible = "snps,dwc3";
-+				compatible = "fsl,ls1046a-dwc3", "snps,dwc3";
- 				reg = <0x0 0x3000000 0x0 0x10000>;
- 				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- 				dr_mode = "host";
-@@ -620,7 +620,7 @@
- 			};
- 
- 			usb2: usb@3100000 {
--				compatible = "snps,dwc3";
-+				compatible = "fsl,ls1046a-dwc3", "snps,dwc3";
- 				reg = <0x0 0x3100000 0x0 0x10000>;
- 				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- 				dr_mode = "host";
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-@@ -394,7 +394,7 @@
- 		};
- 
- 		usb0: usb3@3100000 {
--			compatible = "snps,dwc3";
-+			compatible = "fsl,ls1088a-dwc3", "snps,dwc3";
- 			reg = <0x0 0x3100000 0x0 0x10000>;
- 			interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
- 			dr_mode = "host";
-@@ -406,7 +406,7 @@
- 		};
- 
- 		usb1: usb3@3110000 {
--			compatible = "snps,dwc3";
-+			compatible = "fsl,ls1088a-dwc3", "snps,dwc3";
- 			reg = <0x0 0x3110000 0x0 0x10000>;
- 			interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
- 			dr_mode = "host";
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-@@ -729,7 +729,7 @@
- 
- 		usb0: usb3@3100000 {
- 			status = "disabled";
--			compatible = "snps,dwc3";
-+			compatible = "fsl,ls2088a-dwc3", "snps,dwc3";
- 			reg = <0x0 0x3100000 0x0 0x10000>;
- 			interrupts = <0 80 0x4>; /* Level high type */
- 			dr_mode = "host";
-@@ -741,7 +741,7 @@
- 
- 		usb1: usb3@3110000 {
- 			status = "disabled";
--			compatible = "snps,dwc3";
-+			compatible = "fsl,ls2088a-dwc3", "snps,dwc3";
- 			reg = <0x0 0x3110000 0x0 0x10000>;
- 			interrupts = <0 81 0x4>; /* Level high type */
- 			dr_mode = "host";
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -864,7 +864,7 @@
- 		};
- 
- 		usb0: usb@3100000 {
--			compatible = "snps,dwc3";
-+			compatible = "fsl,lx2160a-dwc3", "snps,dwc3";
- 			reg = <0x0 0x3100000 0x0 0x10000>;
- 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- 			dr_mode = "host";
-@@ -878,7 +878,7 @@
- 		};
- 
- 		usb1: usb@3110000 {
--			compatible = "snps,dwc3";
-+			compatible = "fsl,lx2160a-dwc3", "snps,dwc3";
- 			reg = <0x0 0x3110000 0x0 0x10000>;
- 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- 			dr_mode = "host";
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0098-LF-403-ARM64-dts-fsl-Add-clock-names-mclk0-for-SAI-n.patch b/target/linux/layerscape/patches-5.4/302-dts-0098-LF-403-ARM64-dts-fsl-Add-clock-names-mclk0-for-SAI-n.patch
deleted file mode 100644
index 2cb3cfd7d8..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0098-LF-403-ARM64-dts-fsl-Add-clock-names-mclk0-for-SAI-n.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-From b3e78e4a087922566bc18171190e2eed8a9b7797 Mon Sep 17 00:00:00 2001
-From: Alison Wang <alison.wang@nxp.com>
-Date: Thu, 12 Dec 2019 15:35:32 +0800
-Subject: [PATCH] LF-403 ARM64: dts: fsl: Add clock-names mclk0 for SAI nodes
-
-This patch adds clock-names "mclk0" to match with the current SAI
-driver.
-
-Signed-off-by: Alison Wang <alison.wang@nxp.com>
----
- arch/arm/boot/dts/ls1021a.dtsi                 | 10 ++++++----
- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 10 ++++++----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 15 +++++++++------
- 3 files changed, 21 insertions(+), 14 deletions(-)
-
---- a/arch/arm/boot/dts/ls1021a.dtsi
-+++ b/arch/arm/boot/dts/ls1021a.dtsi
-@@ -649,8 +649,9 @@
- 			reg = <0x0 0x2b50000 0x0 0x10000>;
- 			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
--				 <&clockgen 4 1>, <&clockgen 4 1>;
--			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-+				 <&clockgen 4 1>, <&clockgen 4 1>,
-+				 <&clockgen 4 1>;
-+			clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- 			dma-names = "tx", "rx";
- 			dmas = <&edma0 1 47>,
- 			       <&edma0 1 46>;
-@@ -663,8 +664,9 @@
- 			reg = <0x0 0x2b60000 0x0 0x10000>;
- 			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
--				 <&clockgen 4 1>, <&clockgen 4 1>;
--			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-+				 <&clockgen 4 1>, <&clockgen 4 1>,
-+				 <&clockgen 4 1>;
-+			clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- 			dma-names = "tx", "rx";
- 			dmas = <&edma0 1 45>,
- 			       <&edma0 1 44>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-@@ -405,8 +405,9 @@
- 			reg = <0x0 0x2b50000 0x0 0x10000>;
- 			interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&clockgen 4 3>, <&clockgen 4 3>,
--				 <&clockgen 4 3>, <&clockgen 4 3>;
--			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-+				 <&clockgen 4 3>, <&clockgen 4 3>,
-+				 <&clockgen 4 3>;
-+			clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- 			dma-names = "tx", "rx";
- 			dmas = <&edma0 1 47>,
- 			       <&edma0 1 46>;
-@@ -419,8 +420,9 @@
- 			reg = <0x0 0x2b60000 0x0 0x10000>;
- 			interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&clockgen 4 3>, <&clockgen 4 3>,
--				 <&clockgen 4 3>, <&clockgen 4 3>;
--			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-+				 <&clockgen 4 3>, <&clockgen 4 3>,
-+				 <&clockgen 4 3>;
-+			clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- 			dma-names = "tx", "rx";
- 			dmas = <&edma0 1 45>,
- 			       <&edma0 1 44>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -542,8 +542,9 @@
- 			reg = <0x0 0xf100000 0x0 0x10000>;
- 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
--				 <&clockgen 4 1>, <&clockgen 4 1>;
--			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-+				 <&clockgen 4 1>, <&clockgen 4 1>,
-+				 <&clockgen 4 1>;
-+			clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- 			dma-names = "tx", "rx";
- 			dmas = <&edma0 1 4>,
- 			       <&edma0 1 3>;
-@@ -556,8 +557,9 @@
- 			reg = <0x0 0xf110000 0x0 0x10000>;
- 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
--				 <&clockgen 4 1>, <&clockgen 4 1>;
--			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-+				 <&clockgen 4 1>, <&clockgen 4 1>,
-+				 <&clockgen 4 1>;
-+			clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- 			dma-names = "tx", "rx";
- 			dmas = <&edma0 1 6>,
- 			       <&edma0 1 5>;
-@@ -570,8 +572,9 @@
- 			reg = <0x0 0xf130000 0x0 0x10000>;
- 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
--				 <&clockgen 4 1>, <&clockgen 4 1>;
--			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-+				 <&clockgen 4 1>, <&clockgen 4 1>,
-+				 <&clockgen 4 1>;
-+			clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- 			dma-names = "tx", "rx";
- 			dmas = <&edma0 1 10>,
- 			       <&edma0 1 9>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0099-arm64-dts-layerscape-apply-dma-coherent-for-dwc3-nod.patch b/target/linux/layerscape/patches-5.4/302-dts-0099-arm64-dts-layerscape-apply-dma-coherent-for-dwc3-nod.patch
deleted file mode 100644
index 0db177972f..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0099-arm64-dts-layerscape-apply-dma-coherent-for-dwc3-nod.patch
+++ /dev/null
@@ -1,150 +0,0 @@
-From 18219eaa3f37f375584789b95876967e97b8da3e Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Wed, 25 Dec 2019 14:00:27 +0800
-Subject: [PATCH] arm64: dts: layerscape: apply dma-coherent for dwc3 nodes
-
-Since dwc3 cache type has been set to cacheable, apply dma-coherent to
-all dwc3 nodes accordingly.
-
-Note: For LS1043A and LS1046A, since QE-HDLC still doesn't support
-dma-coherent, we cannot directly revert cd1a4f3c (sdk: dts: ls104x move
-dma-coherent from soc to its child nodes) to recover dma-coherent for
-soc.
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 1 +
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 ++
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++
- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 2 ++
- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 2 ++
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 1 +
- 7 files changed, 14 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-@@ -454,6 +454,7 @@
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 			snps,host-vbus-glitches;
-+			dma-coherent;
- 		};
- 
- 		sata: sata@3200000 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -379,6 +379,7 @@
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			dma-coherent;
- 		};
- 
- 		usb1: usb@3110000 {
-@@ -389,6 +390,7 @@
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			dma-coherent;
- 		};
- 
- 		sata: sata@3200000 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -706,6 +706,7 @@
- 				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 				snps,host-vbus-glitches;
- 				configure-gfladj;
-+				dma-coherent;
- 			};
- 
- 			usb1: usb3@3000000 {
-@@ -720,6 +721,7 @@
- 				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 				snps,host-vbus-glitches;
- 				configure-gfladj;
-+				dma-coherent;
- 			};
- 
- 			usb2: usb3@3100000 {
-@@ -734,6 +736,7 @@
- 				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 				snps,host-vbus-glitches;
- 				configure-gfladj;
-+				dma-coherent;
- 			};
- 
- 			sata: sata@3200000 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-@@ -604,6 +604,7 @@
- 				usb3-lpm-capable;
- 				snps,dis-u1u2-when-u3-quirk;
- 				snps,host-vbus-glitches;
-+				dma-coherent;
- 			};
- 
- 			usb1: usb@3000000 {
-@@ -617,6 +618,7 @@
- 				usb3-lpm-capable;
- 				snps,dis-u1u2-when-u3-quirk;
- 				snps,host-vbus-glitches;
-+				dma-coherent;
- 			};
- 
- 			usb2: usb@3100000 {
-@@ -630,6 +632,7 @@
- 				usb3-lpm-capable;
- 				snps,dis-u1u2-when-u3-quirk;
- 				snps,host-vbus-glitches;
-+				dma-coherent;
- 			};
- 
- 			sata: sata@3200000 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-@@ -402,6 +402,7 @@
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 			snps,host-vbus-glitches;
-+			dma-coherent;
- 			status = "disabled";
- 		};
- 
-@@ -414,6 +415,7 @@
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 			snps,host-vbus-glitches;
-+			dma-coherent;
- 			status = "disabled";
- 		};
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-@@ -737,6 +737,7 @@
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 			snps,host-vbus-glitches;
-+			dma-coherent;
- 		};
- 
- 		usb1: usb3@3110000 {
-@@ -749,6 +750,7 @@
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 			snps,host-vbus-glitches;
-+			dma-coherent;
- 		};
- 
- 		ccn@4000000 {
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -874,6 +874,7 @@
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 			snps,host-vbus-glitches;
-+			dma-coherent;
- 			status = "disabled";
- 		};
- 
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0100-arm64-dts-ls208xa-Update-qspi-node-properties-for-LS.patch b/target/linux/layerscape/patches-5.4/302-dts-0100-arm64-dts-ls208xa-Update-qspi-node-properties-for-LS.patch
deleted file mode 100644
index 6efbe1ecf1..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0100-arm64-dts-ls208xa-Update-qspi-node-properties-for-LS.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 121cd10d9ec4466b09ac33986c7b4c1f8eff9363 Mon Sep 17 00:00:00 2001
-From: Kuldeep Singh <kuldeep.singh@nxp.com>
-Date: Wed, 18 Dec 2019 15:09:41 +0530
-Subject: [PATCH] arm64: dts: ls208xa: Update qspi node properties for
- LS2088ARDB
-
-LS2088ADB has one spansion flash s25fs512s of size 64M.
-
-Update qspi dts entry for the board using compatibles as "jedec,spi-nor"
-to probe flash successfully. Also, align properties with other board dts
-properties.
-
-Since device properties are different, so remove fsl, ls1021a-qspi.
-ls1021a-qspi is to be used only for Big-endian verion of QSPI
-controller. Use dt-bindings constants in interrupts instead of using
-numbers.
-
-Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 8 ++++----
- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     | 6 +++---
- 2 files changed, 7 insertions(+), 7 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
-@@ -110,12 +110,12 @@
- 
- &qspi {
- 	status = "okay";
--	flash0: s25fs512s@0 {
-+
-+	s25fs512s0: flash@0 {
- 		#address-cells = <1>;
- 		#size-cells = <1>;
--		compatible = "spansion,m25p80";
--		m25p,fast-read;
--		spi-max-frequency = <20000000>;
-+		compatible = "jedec,spi-nor";
-+		spi-max-frequency = <50000000>;
- 		reg = <0>;
- 	};
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-@@ -609,16 +609,16 @@
- 		};
- 
- 		qspi: spi@20c0000 {
--			status = "disabled";
--			compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
-+			compatible = "fsl,ls2080a-qspi";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <0x0 0x20c0000 0x0 0x10000>,
- 			      <0x0 0x20000000 0x0 0x10000000>;
- 			reg-names = "QuadSPI", "QuadSPI-memory";
--			interrupts = <0 25 0x4>; /* Level high type */
-+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- 			clock-names = "qspi_en", "qspi";
-+			status = "disabled";
- 		};
- 
- 		pcie1: pcie@3400000 {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0101-arm64-dts-ls208xa-Remove-dma-coherent-from-dwc3-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0101-arm64-dts-ls208xa-Remove-dma-coherent-from-dwc3-node.patch
deleted file mode 100644
index dc90175362..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0101-arm64-dts-ls208xa-Remove-dma-coherent-from-dwc3-node.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From f12e1e289702b9828a2d7deba8744b212e7a6758 Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Fri, 27 Dec 2019 18:20:23 +0800
-Subject: [PATCH] arm64: dts: ls208xa: Remove dma-coherent from dwc3 nodes
-
-ls208xa encounteded below USB failure when applying dma-coherent, remove it.
-[   11.087839] xhci-hcd xhci-hcd.1.auto: Error while assigning device slot ID
-[   11.094730] xhci-hcd xhci-hcd.1.auto: Max number of devices this xHCI host supports is 127.
-[   11.103103] xhci-hcd xhci-hcd.0.auto: Error while assigning device slot ID
-[   11.109985] xhci-hcd xhci-hcd.0.auto: Max number of devices this xHCI host supports is 127.
-[   11.118348] usb usb2-port1: couldn't allocate usb_device
-[   11.123680] usb usb4-port1: couldn't allocate usb_device
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-@@ -737,7 +737,6 @@
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 			snps,host-vbus-glitches;
--			dma-coherent;
- 		};
- 
- 		usb1: usb3@3110000 {
-@@ -750,7 +749,6 @@
- 			snps,dis_rxdet_inp3_quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 			snps,host-vbus-glitches;
--			dma-coherent;
- 		};
- 
- 		ccn@4000000 {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0102-LF-20-1-arm64-dts-ls1012ardb-Update-qspi-node-dts-pr.patch b/target/linux/layerscape/patches-5.4/302-dts-0102-LF-20-1-arm64-dts-ls1012ardb-Update-qspi-node-dts-pr.patch
deleted file mode 100644
index 284519c6c6..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0102-LF-20-1-arm64-dts-ls1012ardb-Update-qspi-node-dts-pr.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From e642e6844bd4e6da28efab377f1a94e0eb9a3532 Mon Sep 17 00:00:00 2001
-From: Kuldeep Singh <kuldeep.singh@nxp.com>
-Date: Fri, 3 Jan 2020 14:47:59 +0530
-Subject: [PATCH] LF-20-1 arm64: dts: ls1012ardb: Update qspi node dts
- properties
-
-Update rx and tx bus-width to 1.
-Use compatibles as "jedec,spi-nor" to probe flash without displaying warning:
-found s25fs512s, expected m25p80
-
-Remove property 'big-endian' as it is not used by new driver anymore.
-Also, update dtsi compatibles to use "fsl,ls1021a-qspi".
-
-Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 8 ++++----
- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi    | 3 +--
- 2 files changed, 5 insertions(+), 6 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-@@ -88,15 +88,15 @@
- 
- &qspi {
- 	status = "okay";
-+
- 	qflash0: s25fs512s@0 {
--		compatible = "spansion,m25p80";
-+		compatible = "jedec,spi-nor";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 		spi-max-frequency = <20000000>;
--		m25p,fast-read;
- 		reg = <0>;
--		spi-rx-bus-width = <2>;
--		spi-tx-bus-width = <2>;
-+		spi-rx-bus-width = <1>;
-+		spi-tx-bus-width = <1>;
- 	};
- 
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-@@ -386,7 +386,7 @@
- 		};
- 
- 		qspi: spi@1550000 {
--			compatible = "fsl,ls1012a-qspi", "fsl,ls1021a-qspi";
-+			compatible = "fsl,ls1021a-qspi";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <0x0 0x1550000 0x0 0x10000>,
-@@ -395,7 +395,6 @@
- 			interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
- 			clock-names = "qspi_en", "qspi";
- 			clocks = <&clockgen 4 0>, <&clockgen 4 0>;
--			big-endian;
- 			status = "disabled";
- 		};
- 
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0103-arm64-dts-ls1028a-Update-edma-compatible-to-fit-eDMA.patch b/target/linux/layerscape/patches-5.4/302-dts-0103-arm64-dts-ls1028a-Update-edma-compatible-to-fit-eDMA.patch
deleted file mode 100644
index f2dccd7ac4..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0103-arm64-dts-ls1028a-Update-edma-compatible-to-fit-eDMA.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 0af4a990ad0ff2bb0df89a68a82023bb94653749 Mon Sep 17 00:00:00 2001
-From: Peng Ma <peng.ma@nxp.com>
-Date: Thu, 12 Dec 2019 11:13:44 +0800
-Subject: [PATCH] arm64: dts: ls1028a: Update edma compatible to fit eDMA
- driver
-
-The eDMA of LS1028A soc has a little bit different from others, So we
-should distinguish them in driver by compatible.
-
-Signed-off-by: Peng Ma <peng.ma@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -325,7 +325,7 @@
- 
- 		edma0: dma-controller@22c0000 {
- 			#dma-cells = <2>;
--			compatible = "fsl,vf610-edma";
-+			compatible = "fsl,ls1028a-edma";
- 			reg = <0x0 0x22c0000 0x0 0x10000>,
- 			      <0x0 0x22d0000 0x0 0x10000>,
- 			      <0x0 0x22e0000 0x0 0x10000>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0104-arm64-dts-lx2160a-add-iommu-map-property-to-pci-node.patch b/target/linux/layerscape/patches-5.4/302-dts-0104-arm64-dts-lx2160a-add-iommu-map-property-to-pci-node.patch
deleted file mode 100644
index 02c46f554a..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0104-arm64-dts-lx2160a-add-iommu-map-property-to-pci-node.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From ad5077a8da6e8aad01b7b6ad979b52c39118969d Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 17 Dec 2019 13:26:37 +0200
-Subject: [PATCH] arm64: dts: lx2160a: add iommu-map property to pci nodes
-
-Add the iommu-map property to the pci nodes so that the firmware
-fixes it up with the required values thus enabling iommu for
-devices connected over pci.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Acked-by: Li Yang <leoyang.li@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -954,6 +954,7 @@
- 			bus-range = <0x0 0xff>;
- 			ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- 			msi-parent = <&its>;
-+			iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 7>;
- 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-@@ -990,6 +991,7 @@
- 			bus-range = <0x0 0xff>;
- 			ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- 			msi-parent = <&its>;
-+			iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 7>;
- 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-@@ -1026,6 +1028,7 @@
- 			bus-range = <0x0 0xff>;
- 			ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- 			msi-parent = <&its>;
-+			iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 7>;
- 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-@@ -1063,6 +1066,7 @@
- 			bus-range = <0x0 0xff>;
- 			ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- 			msi-parent = <&its>;
-+			iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 7>;
- 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-@@ -1099,6 +1103,7 @@
- 			bus-range = <0x0 0xff>;
- 			ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- 			msi-parent = <&its>;
-+			iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 7>;
- 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-@@ -1136,6 +1141,7 @@
- 			bus-range = <0x0 0xff>;
- 			ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- 			msi-parent = <&its>;
-+			iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 7>;
- 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0105-LF-18-1-arm64-dts-ls1088ardb-Update-qspi-dts-node-pr.patch b/target/linux/layerscape/patches-5.4/302-dts-0105-LF-18-1-arm64-dts-ls1088ardb-Update-qspi-dts-node-pr.patch
deleted file mode 100644
index bbe452bc73..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0105-LF-18-1-arm64-dts-ls1088ardb-Update-qspi-dts-node-pr.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 8f29fafb9c3b0936fb6f67212057127c13e17c1c Mon Sep 17 00:00:00 2001
-From: Kuldeep Singh <kuldeep.singh@nxp.com>
-Date: Tue, 7 Jan 2020 17:22:24 +0530
-Subject: [PATCH] LF-18-1 arm64: dts: ls1088ardb: Update qspi dts node
- properties
-
-Use compatibles as "jedec,spi-nor" to probe flash without displaying
-warning: found s25fs512s, expected m25p80.
-Also remove "fsl,qspi-has-second-chip" property as new driver doesn't use
-it anymore.
-
-Update dtsi compatibles to use "fsl,ls2080a-qspi".
-
-Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 18 +++++++++---------
- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi    |  2 +-
- 2 files changed, 10 insertions(+), 10 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
-@@ -76,25 +76,25 @@
- 
- &qspi {
- 	status = "okay";
--	fsl,qspi-has-second-chip;
--	qflash0: s25fs512s@0 {
--		compatible = "spansion,m25p80";
-+
-+	s25fs512s0: flash@0 {
-+		compatible = "jedec,spi-nor";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 		spi-max-frequency = <20000000>;
- 		reg = <0>;
--		spi-rx-bus-width = <4>;
--		spi-tx-bus-width = <4>;
-+		spi-rx-bus-width = <1>;
-+		spi-tx-bus-width = <1>;
- 	};
- 
--	qflash1: s25fs512s@1 {
--		compatible = "spansion,m25p80";
-+	s25fs512s1: flash@1 {
-+		compatible = "jedec,spi-nor";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 		spi-max-frequency = <20000000>;
- 		reg = <1>;
--		spi-rx-bus-width = <4>;
--		spi-tx-bus-width = <4>;
-+		spi-rx-bus-width = <1>;
-+		spi-tx-bus-width = <1>;
- 	};
- 
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
-@@ -430,7 +430,7 @@
- 			status = "disabled";
- 		};
- 		qspi: spi@20c0000 {
--			compatible = "fsl,ls2080a-qspi", "fsl,ls1088a-qspi";
-+			compatible = "fsl,ls2080a-qspi";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <0x0 0x20c0000 0x0 0x10000>,
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0106-LF-18-2-arm64-dts-ls1046ardb-Update-qspi-node-dts-pr.patch b/target/linux/layerscape/patches-5.4/302-dts-0106-LF-18-2-arm64-dts-ls1046ardb-Update-qspi-node-dts-pr.patch
deleted file mode 100644
index 66746b0ebc..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0106-LF-18-2-arm64-dts-ls1046ardb-Update-qspi-node-dts-pr.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From ae5dad214ec109cdeffd3fac5ce4be6ab59a0283 Mon Sep 17 00:00:00 2001
-From: Kuldeep Singh <kuldeep.singh@nxp.com>
-Date: Fri, 3 Jan 2020 14:49:07 +0530
-Subject: [PATCH] LF-18-2 arm64: dts: ls1046ardb: Update qspi node dts
- properties
-
-Use compatibles as "jedec,spi-nor" to probe flash without displaying
-warning: found s25fs512s, expected m25p80.
-Remove "fsl,qspi-has-second-chip" as new driver doesn't use it anymore.
-Update rx and tx width to 1.
-
-Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 17 ++++++++---------
- 1 file changed, 8 insertions(+), 9 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
-@@ -100,25 +100,24 @@
- 
- &qspi {
- 	status = "okay";
--	fsl,qspi-has-second-chip;
- 
--	qflash0: flash@0 {
--		compatible = "spansion,m25p80";
-+	s25fs512s0: flash@0 {
-+		compatible = "jedec,spi-nor";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 		spi-max-frequency = <50000000>;
--		spi-rx-bus-width = <4>;
--		spi-tx-bus-width = <4>;
-+		spi-rx-bus-width = <1>;
-+		spi-tx-bus-width = <1>;
- 		reg = <0>;
- 	};
- 
--	qflash1: flash@1 {
--		compatible = "spansion,m25p80";
-+	s25fs512s: flash@1 {
-+		compatible = "jedec,spi-nor";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 		spi-max-frequency = <50000000>;
--		spi-rx-bus-width = <4>;
--		spi-tx-bus-width = <4>;
-+		spi-rx-bus-width = <1>;
-+		spi-tx-bus-width = <1>;
- 		reg = <1>;
- 	};
- };
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0107-arm64-dts-ls1012ardb-Update-qspi-node-property.patch b/target/linux/layerscape/patches-5.4/302-dts-0107-arm64-dts-ls1012ardb-Update-qspi-node-property.patch
deleted file mode 100644
index 19f9d80d07..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0107-arm64-dts-ls1012ardb-Update-qspi-node-property.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From d870db86f12a69361472fc86bc516b89d9bf468c Mon Sep 17 00:00:00 2001
-From: Kuldeep Singh <kuldeep.singh@nxp.com>
-Date: Wed, 8 Jan 2020 15:50:44 +0530
-Subject: [PATCH] arm64: dts: ls1012ardb: Update qspi node property
-
-Use generic node name and specific label name.
-Add m25p,fast-read.
-
-Use dt-bindings constants in interrupts instead of using numbers.
-
-Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 3 ++-
- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi    | 2 +-
- 2 files changed, 3 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-@@ -89,11 +89,12 @@
- &qspi {
- 	status = "okay";
- 
--	qflash0: s25fs512s@0 {
-+	s25fs512s0: flash@0 {
- 		compatible = "jedec,spi-nor";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 		spi-max-frequency = <20000000>;
-+		m25p,fast-read;
- 		reg = <0>;
- 		spi-rx-bus-width = <1>;
- 		spi-tx-bus-width = <1>;
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-@@ -392,7 +392,7 @@
- 			reg = <0x0 0x1550000 0x0 0x10000>,
- 				<0x0 0x40000000 0x0 0x10000000>;
- 			reg-names = "QuadSPI", "QuadSPI-memory";
--			interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- 			clock-names = "qspi_en", "qspi";
- 			clocks = <&clockgen 4 0>, <&clockgen 4 0>;
- 			status = "disabled";
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0109-arm64-dts-ls1028a-rdb-Enable-SGMII-AN-for-the-QSGMII.patch b/target/linux/layerscape/patches-5.4/302-dts-0109-arm64-dts-ls1028a-rdb-Enable-SGMII-AN-for-the-QSGMII.patch
deleted file mode 100644
index 33d7109740..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0109-arm64-dts-ls1028a-rdb-Enable-SGMII-AN-for-the-QSGMII.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 57c0539d99fed2252364b431de004f9110ac3d3f Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Fri, 6 Dec 2019 13:59:05 +0200
-Subject: [PATCH] arm64: dts: ls1028a-rdb: Enable SGMII AN for the QSGMII
- switch ports
-
-This enables monitoring of link status and AN. It should also physically
-enable SGMII AN with the VSC8514 PHY, but in practice that is still
-hardcoded as "on" in the PHY driver, at the moment. So since Felix
-actually disables SGMII AN when this DT property is absent, this would
-result in an in-band AN mismatch between the MAC and the PHY. So this
-property is required for the moment for this MAC/PHY combination.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-@@ -236,21 +236,25 @@
- &switch_port0 {
- 	phy-handle = <&qsgmii_phy1>;
- 	phy-connection-type = "qsgmii";
-+	managed = "in-band-status";
- };
- 
- &switch_port1 {
- 	phy-handle = <&qsgmii_phy2>;
- 	phy-connection-type = "qsgmii";
-+	managed = "in-band-status";
- };
- 
- &switch_port2 {
- 	phy-handle = <&qsgmii_phy3>;
- 	phy-connection-type = "qsgmii";
-+	managed = "in-band-status";
- };
- 
- &switch_port3 {
- 	phy-handle = <&qsgmii_phy4>;
- 	phy-connection-type = "qsgmii";
-+	managed = "in-band-status";
- };
- 
- &sai4 {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0110-arm64-dts-ls1028a-Disable-swp5-by-default.patch b/target/linux/layerscape/patches-5.4/302-dts-0110-arm64-dts-ls1028a-Disable-swp5-by-default.patch
deleted file mode 100644
index 8c81a4560c..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0110-arm64-dts-ls1028a-Disable-swp5-by-default.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From fd73bb7cf812fcb96116f70393d3e66aa4ddc1fa Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Fri, 6 Dec 2019 13:56:46 +0200
-Subject: [PATCH] arm64: dts: ls1028a: Disable swp5 by default
-
-This was missed when moving the CPU port and disabling eno3.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -808,6 +808,7 @@
- 					port@5 {
- 						reg = <5>;
- 						phy-mode = "gmii";
-+						status = "disabled";
- 
- 						fixed-link {
- 							speed = <2500>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0111-arm64-dts-fsl-ls1028a-rdb-fix-QSGMII-PHY-node-names.patch b/target/linux/layerscape/patches-5.4/302-dts-0111-arm64-dts-fsl-ls1028a-rdb-fix-QSGMII-PHY-node-names.patch
deleted file mode 100644
index dbea8abfb6..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0111-arm64-dts-fsl-ls1028a-rdb-fix-QSGMII-PHY-node-names.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 85252792bc07b398582e8dacf6ec6d09a5075195 Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Tue, 7 Jan 2020 15:15:29 +0200
-Subject: [PATCH] arm64: dts: fsl-ls1028a-rdb: fix QSGMII PHY node names
-
-Use ethernet-phy@ADDR, previously the numbers were wrong.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-@@ -215,19 +215,19 @@
- };
- 
- &enetc_mdio_pf3 {
--	qsgmii_phy1: ethernet-phy@4 {
-+	qsgmii_phy1: ethernet-phy@10 {
- 		reg = <0x10>;
- 	};
- 
--	qsgmii_phy2: ethernet-phy@5 {
-+	qsgmii_phy2: ethernet-phy@11 {
- 		reg = <0x11>;
- 	};
- 
--	qsgmii_phy3: ethernet-phy@6 {
-+	qsgmii_phy3: ethernet-phy@12 {
- 		reg = <0x12>;
- 	};
- 
--	qsgmii_phy4: ethernet-phy@7 {
-+	qsgmii_phy4: ethernet-phy@13 {
- 		reg = <0x13>;
- 	};
- };
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0112-arm64-dts-fsl-ls1028a-prepare-dts-for-overlay.patch b/target/linux/layerscape/patches-5.4/302-dts-0112-arm64-dts-fsl-ls1028a-prepare-dts-for-overlay.patch
deleted file mode 100644
index 4b20e42794..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0112-arm64-dts-fsl-ls1028a-prepare-dts-for-overlay.patch
+++ /dev/null
@@ -1,452 +0,0 @@
-From a5009b362d65c24e7b2a40824e351903d75a47dc Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Mon, 6 Jan 2020 16:36:44 +0200
-Subject: [PATCH] arm64: dts: fsl-ls1028a: prepare dts for overlay
-
-Named the ports node of the Felix Eth switch so it can be used in DT
-overlays to associate the ports with proper PHYs.
-Ports are now by default disabled in dtsi, so if the board dts doesn't
-do anything about them they stay disabled.
-Updated RDB and QDS dts files to match.
-Replaced all 'phy-connection-type' with 'phy-mode'.
-The set-up for protocol 7777 on QDS was changed to a single quad port card
-in slot 1.  This requires a QDS board with no lane B rework and a AQR412
-or similar PHY card without any lane rework done on it.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- .../boot/dts/freescale/fsl-ls1028a-qds-7777.dtsi   | 58 ++++++++++-----------
- .../boot/dts/freescale/fsl-ls1028a-qds-9999.dtsi   | 59 ++++++++++------------
- .../boot/dts/freescale/fsl-ls1028a-qds-x3xx.dtsi   | 51 ++++++++++++-------
- .../boot/dts/freescale/fsl-ls1028a-qds-x5xx.dtsi   | 43 ++++++++++------
- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts  | 44 +++++++++-------
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi     | 27 +++++++---
- 6 files changed, 161 insertions(+), 121 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtsi
-@@ -7,50 +7,50 @@
-  */
- 
- &mdio_slot1 {
--	/* two ports on AQR412 */
--	slot1_sxgmii2: ethernet-phy@2 {
--		reg = <0x2>;
-+	slot1_sxgmii0: ethernet-phy@0 {
-+		reg = <0x0>;
- 		compatible = "ethernet-phy-ieee802.3-c45";
- 	};
--	slot1_sxgmii3: ethernet-phy@3 {
--		reg = <0x3>;
-+
-+	slot1_sxgmii1: ethernet-phy@1 {
-+		reg = <0x1>;
- 		compatible = "ethernet-phy-ieee802.3-c45";
- 	};
--};
- 
--&mdio_slot2 {
--	slot2_sxgmii0: ethernet-phy@2 {
--		/* AQR112 */
-+	slot1_sxgmii2: ethernet-phy@2 {
- 		reg = <0x2>;
- 		compatible = "ethernet-phy-ieee802.3-c45";
- 	};
--};
- 
--&mdio_slot3 {
--	slot3_sxgmii0: ethernet-phy@2 {
--		/* AQR112 */
--		reg = <0x2>;
-+	slot1_sxgmii3: ethernet-phy@3 {
-+		reg = <0x3>;
- 		compatible = "ethernet-phy-ieee802.3-c45";
- 	};
- };
- 
- /* l2switch ports */
--&switch_port0 {
--	phy-handle = <&slot1_sxgmii2>;
--	phy-connection-type = "2500base-x";
--};
-+&mscc_felix_ports {
-+	port@0 {
-+		status = "okay";
-+		phy-handle = <&slot1_sxgmii0>;
-+		phy-mode = "2500base-x";
-+	};
- 
--&switch_port1 {
--	phy-handle = <&slot2_sxgmii0>;
--	phy-connection-type = "2500base-x";
--};
-+	port@1 {
-+		status = "okay";
-+		phy-handle = <&slot1_sxgmii1>;
-+		phy-mode = "2500base-x";
-+	};
- 
--&switch_port2 {
--	phy-handle = <&slot3_sxgmii0>;
--	phy-connection-type = "2500base-x";
--};
-+	port@2 {
-+		status = "okay";
-+		phy-handle = <&slot1_sxgmii2>;
-+		phy-mode = "2500base-x";
-+	};
- 
--&switch_port3 {
--	phy-handle = <&slot1_sxgmii3>;
--	phy-connection-type = "2500base-x";
-+	port@3 {
-+		status = "okay";
-+		phy-handle = <&slot1_sxgmii3>;
-+		phy-mode = "2500base-x";
-+	};
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtsi
-@@ -11,50 +11,47 @@
- 	slot1_sgmii0: ethernet-phy@1c {
- 		reg = <0x1c>;
- 	};
-+
- 	slot1_sgmii1: ethernet-phy@1d {
- 		reg = <0x1d>;
- 	};
-+
- 	slot1_sgmii2: ethernet-phy@1e {
- 		reg = <0x1e>;
- 	};
--	slot1_sgmii3: ethernet-phy@1f {
--		reg = <0x1f>;
--	};
--};
- 
--&mdio_slot2 {
--	/* VSC8234 */
--	slot2_sgmii0: ethernet-phy@1c {
--		reg = <0x1c>;
--	};
--	slot2_sgmii1: ethernet-phy@1d {
--		reg = <0x1d>;
--	};
--	slot2_sgmii2: ethernet-phy@1e {
--		reg = <0x1e>;
--	};
--	slot2_sgmii3: ethernet-phy@1f {
-+	slot1_sgmii3: ethernet-phy@1f {
- 		reg = <0x1f>;
- 	};
- };
- 
- /* l2switch ports */
--&switch_port0 {
--	phy-handle = <&slot1_sgmii0>;
--	phy-connection-type = "sgmii";
--};
-+&mscc_felix_ports {
-+	port@0 {
-+		status = "okay";
-+		phy-handle = <&slot1_sgmii0>;
-+		phy-mode = "sgmii";
-+		managed = "in-band-status";
-+	};
- 
--&switch_port1 {
--	phy-handle = <&slot2_sgmii0>;
--	phy-connection-type = "sgmii";
--};
-+	port@1 {
-+		status = "okay";
-+		phy-handle = <&slot1_sgmii1>;
-+		phy-mode = "sgmii";
-+		managed = "in-band-status";
-+	};
- 
--&switch_port2 {
--	phy-handle = <&slot1_sgmii2>;
--	phy-connection-type = "sgmii";
--};
-+	port@2 {
-+		status = "okay";
-+		phy-handle = <&slot1_sgmii2>;
-+		phy-mode = "sgmii";
-+		managed = "in-band-status";
-+	};
- 
--&switch_port3 {
--	phy-handle = <&slot1_sgmii3>;
--	phy-connection-type = "sgmii";
-+	port@3 {
-+		status = "okay";
-+		phy-handle = <&slot1_sgmii3>;
-+		phy-mode = "sgmii";
-+		managed = "in-band-status";
-+	};
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x3xx.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x3xx.dtsi
-@@ -8,41 +8,54 @@
- 
- &mdio_slot2 {
- 	/* 4 ports on AQR412 */
--	slot2_qsgmii0: ethernet-phy@0 {
-+	slot2_qxgmii0: ethernet-phy@0 {
- 		reg = <0x0>;
- 		compatible = "ethernet-phy-ieee802.3-c45";
- 	};
--	slot2_qsgmii1: ethernet-phy@1 {
-+
-+	slot2_qxgmii1: ethernet-phy@1 {
- 		reg = <0x1>;
- 		compatible = "ethernet-phy-ieee802.3-c45";
- 	};
--	slot2_qsgmii2: ethernet-phy@2 {
-+
-+	slot2_qxgmii2: ethernet-phy@2 {
- 		reg = <0x2>;
- 		compatible = "ethernet-phy-ieee802.3-c45";
- 	};
--	slot2_qsgmii3: ethernet-phy@3 {
-+
-+	slot2_qxgmii3: ethernet-phy@3 {
- 		reg = <0x3>;
- 		compatible = "ethernet-phy-ieee802.3-c45";
- 	};
- };
- 
- /* l2switch ports */
--&switch_port0 {
--	phy-handle = <&slot2_qsgmii0>;
--	phy-connection-type = "usxgmii";
--};
-+&mscc_felix_ports {
-+	port@0 {
-+		status = "okay";
-+		phy-handle = <&slot2_qxgmii0>;
-+		phy-mode = "usxgmii";
-+		managed = "in-band-status";
-+	};
- 
--&switch_port1 {
--	phy-handle = <&slot2_qsgmii1>;
--	phy-connection-type = "usxgmii";
--};
-+	port@1 {
-+		status = "okay";
-+		phy-handle = <&slot2_qxgmii1>;
-+		phy-mode = "usxgmii";
-+		managed = "in-band-status";
-+	};
- 
--&switch_port2 {
--	phy-handle = <&slot2_qsgmii2>;
--	phy-connection-type = "usxgmii";
--};
-+	port@2 {
-+		status = "okay";
-+		phy-handle = <&slot2_qxgmii2>;
-+		phy-mode = "usxgmii";
-+		managed = "in-band-status";
-+	};
- 
--&switch_port3 {
--	phy-handle = <&slot2_qsgmii3>;
--	phy-connection-type = "usxgmii";
-+	port@3 {
-+		status = "okay";
-+		phy-handle = <&slot2_qxgmii3>;
-+		phy-mode = "usxgmii";
-+		managed = "in-band-status";
-+	};
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x5xx.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x5xx.dtsi
-@@ -11,34 +11,47 @@
- 	slot2_qsgmii0: ethernet-phy@8 {
- 		reg = <0x8>;
- 	};
-+
- 	slot2_qsgmii1: ethernet-phy@9 {
- 		reg = <0x9>;
- 	};
-+
- 	slot2_qsgmii2: ethernet-phy@a {
- 		reg = <0xa>;
- 	};
-+
- 	slot2_qsgmii3: ethernet-phy@b {
- 		reg = <0xb>;
- 	};
- };
- 
- /* l2switch ports */
--&switch_port0 {
--	phy-handle = <&slot2_qsgmii0>;
--	phy-connection-type = "qsgmii";
--};
-+&mscc_felix_ports {
-+	port@0 {
-+		status = "okay";
-+		phy-handle = <&slot2_qsgmii0>;
-+		phy-mode = "qsgmii";
-+		managed = "in-band-status";
-+	};
- 
--&switch_port1 {
--	phy-handle = <&slot2_qsgmii1>;
--	phy-connection-type = "qsgmii";
--};
-+	port@1 {
-+		status = "okay";
-+		phy-handle = <&slot2_qsgmii1>;
-+		phy-mode = "qsgmii";
-+		managed = "in-band-status";
-+	};
- 
--&switch_port2 {
--	phy-handle = <&slot2_qsgmii2>;
--	phy-connection-type = "qsgmii";
--};
-+	port@2 {
-+		status = "okay";
-+		phy-handle = <&slot2_qsgmii2>;
-+		phy-mode = "qsgmii";
-+		managed = "in-band-status";
-+	};
- 
--&switch_port3 {
--	phy-handle = <&slot2_qsgmii3>;
--	phy-connection-type = "qsgmii";
-+	port@3 {
-+		status = "okay";
-+		phy-handle = <&slot2_qsgmii3>;
-+		phy-mode = "qsgmii";
-+		managed = "in-band-status";
-+	};
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-@@ -233,28 +233,34 @@
- };
- 
- /* l2switch ports */
--&switch_port0 {
--	phy-handle = <&qsgmii_phy1>;
--	phy-connection-type = "qsgmii";
--	managed = "in-band-status";
--};
-+&mscc_felix_ports {
-+	port@0 {
-+		status = "okay";
-+		phy-handle = <&qsgmii_phy1>;
-+		phy-mode = "qsgmii";
-+		managed = "in-band-status";
-+	};
- 
--&switch_port1 {
--	phy-handle = <&qsgmii_phy2>;
--	phy-connection-type = "qsgmii";
--	managed = "in-band-status";
--};
-+	port@1 {
-+		status = "okay";
-+		phy-handle = <&qsgmii_phy2>;
-+		phy-mode = "qsgmii";
-+		managed = "in-band-status";
-+	};
- 
--&switch_port2 {
--	phy-handle = <&qsgmii_phy3>;
--	phy-connection-type = "qsgmii";
--	managed = "in-band-status";
--};
-+	port@2 {
-+		status = "okay";
-+		phy-handle = <&qsgmii_phy3>;
-+		phy-mode = "qsgmii";
-+		managed = "in-band-status";
-+	};
- 
--&switch_port3 {
--	phy-handle = <&qsgmii_phy4>;
--	phy-connection-type = "qsgmii";
--	managed = "in-band-status";
-+	port@3 {
-+		status = "okay";
-+		phy-handle = <&qsgmii_phy4>;
-+		phy-mode = "qsgmii";
-+		managed = "in-band-status";
-+	};
- };
- 
- &sai4 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -772,30 +772,39 @@
- 				clocks = <&clockgen 2 3>;
- 				little-endian;
- 			};
--			switch@0,5 {
-+
-+			ethernet-switch@0,5 {
- 				reg = <0x000500 0 0 0 0>;
- 				/* IEP INT_B */
- 				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- 
--				ports {
-+				mscc_felix_ports: ports {
- 					#address-cells = <1>;
- 					#size-cells = <0>;
- 
- 					/* external ports */
--					switch_port0: port@0 {
-+					mscc_felix_port0: port@0 {
- 						reg = <0>;
-+						status = "disabled";
- 					};
--					switch_port1: port@1 {
-+
-+					mscc_felix_port1: port@1 {
- 						reg = <1>;
-+						status = "disabled";
- 					};
--					switch_port2: port@2 {
-+
-+					mscc_felix_port2: port@2 {
- 						reg = <2>;
-+						status = "disabled";
- 					};
--					switch_port3: port@3 {
-+
-+					mscc_felix_port3: port@3 {
- 						reg = <3>;
-+						status = "disabled";
- 					};
-+
- 					/* internal to-cpu ports */
--					port@4 {
-+					mscc_felix_port4: port@4 {
- 						reg = <4>;
- 						ethernet = <&enetc_port2>;
- 						phy-mode = "gmii";
-@@ -805,7 +814,8 @@
- 							full-duplex;
- 						};
- 					};
--					port@5 {
-+
-+					mscc_felix_port5: port@5 {
- 						reg = <5>;
- 						phy-mode = "gmii";
- 						status = "disabled";
-@@ -817,6 +827,7 @@
- 					};
- 				};
- 			};
-+
- 			enetc_port3: ethernet@0,6 {
- 				compatible = "fsl,enetc";
- 				reg = <0x000600 0 0 0 0>;
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0113-arm64-dts-fsl-ls1028a-qds-Add-overlays-for-various-s.patch b/target/linux/layerscape/patches-5.4/302-dts-0113-arm64-dts-fsl-ls1028a-qds-Add-overlays-for-various-s.patch
deleted file mode 100644
index faa7c58bf1..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0113-arm64-dts-fsl-ls1028a-qds-Add-overlays-for-various-s.patch
+++ /dev/null
@@ -1,893 +0,0 @@
-From d2333a40b00ba5fb5b9731f96ca663036f781411 Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Tue, 7 Jan 2020 14:48:20 +0200
-Subject: [PATCH] arm64: dts: fsl-ls1028a-qds: Add overlays for various serdes
- protocols
-
-Adds overlays for various serdes protocols on LS1028A QDS board using
-different PHY cards.  These should be applied at boot, based on serdes
-configuration.  If no overlay is applied, only the RGMII interface on
-the QDS is available in Linux.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- arch/arm64/boot/dts/freescale/Makefile             |   6 ++
- .../boot/dts/freescale/fsl-ls1028a-qds-13bb.dts    | 100 +++++++++++++++++++++
- .../boot/dts/freescale/fsl-ls1028a-qds-1xxx.dtsi   |  20 -----
- .../boot/dts/freescale/fsl-ls1028a-qds-65bb.dts    |  94 +++++++++++++++++++
- .../boot/dts/freescale/fsl-ls1028a-qds-6xxx.dtsi   |  20 -----
- .../boot/dts/freescale/fsl-ls1028a-qds-7777.dts    |  73 +++++++++++++++
- .../boot/dts/freescale/fsl-ls1028a-qds-7777.dtsi   |  56 ------------
- .../boot/dts/freescale/fsl-ls1028a-qds-85bb.dts    |  93 +++++++++++++++++++
- .../boot/dts/freescale/fsl-ls1028a-qds-899b.dts    |  66 ++++++++++++++
- .../boot/dts/freescale/fsl-ls1028a-qds-8xxx.dtsi   |  19 ----
- .../boot/dts/freescale/fsl-ls1028a-qds-9999.dts    |  71 +++++++++++++++
- .../boot/dts/freescale/fsl-ls1028a-qds-9999.dtsi   |  57 ------------
- .../boot/dts/freescale/fsl-ls1028a-qds-x3xx.dtsi   |  61 -------------
- .../boot/dts/freescale/fsl-ls1028a-qds-x5xx.dtsi   |  57 ------------
- arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts  |   3 -
- 15 files changed, 503 insertions(+), 293 deletions(-)
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
- delete mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-1xxx.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
- delete mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-6xxx.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
- delete mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
- delete mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-8xxx.dtsi
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
- delete mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtsi
- delete mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x3xx.dtsi
- delete mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x5xx.dtsi
-
---- a/arch/arm64/boot/dts/freescale/Makefile
-+++ b/arch/arm64/boot/dts/freescale/Makefile
-@@ -6,6 +6,12 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-13bb.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-65bb.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-7777.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds-sdk.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
-@@ -0,0 +1,100 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree fragment for LS1028A QDS board, serdes 13bb
-+ *
-+ * Copyright 2019 NXP
-+ *
-+ * Requires a LS1028A QDS board with lane B rework.
-+ * Requires a SCH-30841 card with lane A of connector rewired to PHY lane C.
-+ * Set-up is a SCH-30842 card in slot 1 and SCH-30841 in slot 2.
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	fragment@0 {
-+		target = <&mdio_slot1>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			slot1_sgmii: ethernet-phy@2 {
-+				/* AQR112 */
-+				reg = <0x2>;
-+				compatible = "ethernet-phy-ieee802.3-c45";
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&enetc_port0>;
-+		__overlay__ {
-+			phy-handle = <&slot1_sgmii>;
-+			phy-mode = "usxgmii";
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&mdio_slot2>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			/* 4 ports on AQR412 */
-+			slot2_qxgmii0: ethernet-phy@0 {
-+				reg = <0x0>;
-+				compatible = "ethernet-phy-ieee802.3-c45";
-+			};
-+
-+			slot2_qxgmii1: ethernet-phy@1 {
-+				reg = <0x1>;
-+				compatible = "ethernet-phy-ieee802.3-c45";
-+			};
-+
-+			slot2_qxgmii2: ethernet-phy@2 {
-+				reg = <0x2>;
-+				compatible = "ethernet-phy-ieee802.3-c45";
-+			};
-+
-+			slot2_qxgmii3: ethernet-phy@3 {
-+				reg = <0x3>;
-+				compatible = "ethernet-phy-ieee802.3-c45";
-+			};
-+		};
-+	};
-+
-+	fragment@3 {
-+		target = <&mscc_felix_ports>;
-+		__overlay__ {
-+			port@0 {
-+				status = "okay";
-+				phy-handle = <&slot2_qxgmii0>;
-+				phy-mode = "usxgmii";
-+				managed = "in-band-status";
-+			};
-+
-+			port@1 {
-+				status = "okay";
-+				phy-handle = <&slot2_qxgmii1>;
-+				phy-mode = "usxgmii";
-+				managed = "in-band-status";
-+			};
-+
-+			port@2 {
-+				status = "okay";
-+				phy-handle = <&slot2_qxgmii2>;
-+				phy-mode = "usxgmii";
-+				managed = "in-band-status";
-+			};
-+
-+			port@3 {
-+				status = "okay";
-+				phy-handle = <&slot2_qxgmii3>;
-+				phy-mode = "usxgmii";
-+				managed = "in-band-status";
-+			};
-+		};
-+	};
-+};
-+
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-1xxx.dtsi
-+++ /dev/null
-@@ -1,20 +0,0 @@
--// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
--/*
-- * Device Tree Include file for LS1028A QDS board, serdes 1xxx
-- *
-- * Copyright 2019 NXP
-- *
-- */
--
--&mdio_slot1 {
--	slot1_sgmii: ethernet-phy@2 {
--		/* AQR112 */
--		reg = <0x2>;
--		compatible = "ethernet-phy-ieee802.3-c45";
--	};
--};
--
--&enetc_port0 {
--	phy-handle = <&slot1_sgmii>;
--	phy-connection-type = "usxgmii";
--};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
-@@ -0,0 +1,94 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree fragment for LS1028A QDS board, serdes 69xx
-+ *
-+ * Copyright 2019 NXP
-+ *
-+ * Requires a LS1028A QDS board with lane B rework.
-+ * Requires a SCH-30842 card in slot 1 and a SCH-28021 card in slot 2.
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	fragment@0 {
-+		target = <&mdio_slot1>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			slot1_sgmii: ethernet-phy@2 {
-+				/* AQR112 */
-+				reg = <0x2>;
-+				compatible = "ethernet-phy-ieee802.3-c45";
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&enetc_port0>;
-+		__overlay__ {
-+			phy-handle = <&slot1_sgmii>;
-+			phy-mode = "2500base-x";
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&mdio_slot2>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			/* 4 ports on VSC8514 */
-+			slot2_qsgmii0: ethernet-phy@8 {
-+				reg = <0x8>;
-+			};
-+
-+			slot2_qsgmii1: ethernet-phy@9 {
-+				reg = <0x9>;
-+			};
-+
-+			slot2_qsgmii2: ethernet-phy@a {
-+				reg = <0xa>;
-+			};
-+
-+			slot2_qsgmii3: ethernet-phy@b {
-+				reg = <0xb>;
-+			};
-+		};
-+	};
-+
-+	fragment@3 {
-+		target = <&mscc_felix_ports>;
-+		__overlay__ {
-+			port@0 {
-+				status = "okay";
-+				phy-handle = <&slot2_qsgmii0>;
-+				phy-mode = "qsgmii";
-+				managed = "in-band-status";
-+			};
-+
-+			port@1 {
-+				status = "okay";
-+				phy-handle = <&slot2_qsgmii1>;
-+				phy-mode = "qsgmii";
-+				managed = "in-band-status";
-+			};
-+
-+			port@2 {
-+				status = "okay";
-+				phy-handle = <&slot2_qsgmii2>;
-+				phy-mode = "qsgmii";
-+				managed = "in-band-status";
-+			};
-+
-+			port@3 {
-+				status = "okay";
-+				phy-handle = <&slot2_qsgmii3>;
-+				phy-mode = "qsgmii";
-+				managed = "in-band-status";
-+			};
-+		};
-+	};
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-6xxx.dtsi
-+++ /dev/null
-@@ -1,20 +0,0 @@
--// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
--/*
-- * Device Tree Include file for LS1028A QDS board, serdes 6xxx
-- *
-- * Copyright 2019 NXP
-- *
-- */
--
--&mdio_slot1 {
--	slot1_sgmii: ethernet-phy@2 {
--		/* AQR112 */
--		reg = <0x2>;
--		compatible = "ethernet-phy-ieee802.3-c45";
--	};
--};
--
--&enetc_port0 {
--	phy-handle = <&slot1_sgmii>;
--	phy-connection-type = "2500base-x";
--};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
-@@ -0,0 +1,73 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree fragment for LS1028A QDS board, serdes 7777
-+ *
-+ * Copyright 2019 NXP
-+ *
-+ * Requires a LS1028A QDS board without lane B rework.
-+ * Requires a SCH-30841 card without lane A/C rewire and with a FW with muxing
-+ * disabled, plugged in slot 1.
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	fragment@0 {
-+		target = <&mdio_slot1>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			/* 4 ports on AQR412 */
-+			slot1_sxgmii0: ethernet-phy@0 {
-+				reg = <0x0>;
-+				compatible = "ethernet-phy-ieee802.3-c45";
-+			};
-+
-+			slot1_sxgmii1: ethernet-phy@1 {
-+				reg = <0x1>;
-+				compatible = "ethernet-phy-ieee802.3-c45";
-+			};
-+
-+			slot1_sxgmii2: ethernet-phy@2 {
-+				reg = <0x2>;
-+				compatible = "ethernet-phy-ieee802.3-c45";
-+			};
-+
-+			slot1_sxgmii3: ethernet-phy@3 {
-+				reg = <0x3>;
-+				compatible = "ethernet-phy-ieee802.3-c45";
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&mscc_felix_ports>;
-+		__overlay__ {
-+			port@0 {
-+				status = "okay";
-+				phy-handle = <&slot1_sxgmii0>;
-+				phy-mode = "2500base-x";
-+			};
-+
-+			port@1 {
-+				status = "okay";
-+				phy-handle = <&slot1_sxgmii1>;
-+				phy-mode = "2500base-x";
-+			};
-+
-+			port@2 {
-+				status = "okay";
-+				phy-handle = <&slot1_sxgmii2>;
-+				phy-mode = "2500base-x";
-+			};
-+
-+			port@3 {
-+				status = "okay";
-+				phy-handle = <&slot1_sxgmii3>;
-+				phy-mode = "2500base-x";
-+			};
-+		};
-+	};
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtsi
-+++ /dev/null
-@@ -1,56 +0,0 @@
--// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
--/*
-- * Device Tree Include file for LS1028A QDS board, serdes 9999
-- *
-- * Copyright 2019 NXP
-- *
-- */
--
--&mdio_slot1 {
--	slot1_sxgmii0: ethernet-phy@0 {
--		reg = <0x0>;
--		compatible = "ethernet-phy-ieee802.3-c45";
--	};
--
--	slot1_sxgmii1: ethernet-phy@1 {
--		reg = <0x1>;
--		compatible = "ethernet-phy-ieee802.3-c45";
--	};
--
--	slot1_sxgmii2: ethernet-phy@2 {
--		reg = <0x2>;
--		compatible = "ethernet-phy-ieee802.3-c45";
--	};
--
--	slot1_sxgmii3: ethernet-phy@3 {
--		reg = <0x3>;
--		compatible = "ethernet-phy-ieee802.3-c45";
--	};
--};
--
--/* l2switch ports */
--&mscc_felix_ports {
--	port@0 {
--		status = "okay";
--		phy-handle = <&slot1_sxgmii0>;
--		phy-mode = "2500base-x";
--	};
--
--	port@1 {
--		status = "okay";
--		phy-handle = <&slot1_sxgmii1>;
--		phy-mode = "2500base-x";
--	};
--
--	port@2 {
--		status = "okay";
--		phy-handle = <&slot1_sxgmii2>;
--		phy-mode = "2500base-x";
--	};
--
--	port@3 {
--		status = "okay";
--		phy-handle = <&slot1_sxgmii3>;
--		phy-mode = "2500base-x";
--	};
--};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
-@@ -0,0 +1,93 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree fragment for LS1028A QDS board, serdes 85bb
-+ *
-+ * Copyright 2019 NXP
-+ *
-+ * Requires a LS1028A QDS board with lane B rework.
-+ * Requires a SCH-24801 card in slot 1 and a SCH-28021 card in slot 2.
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	fragment@0 {
-+		target = <&mdio_slot1>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			slot1_sgmii: ethernet-phy@1c {
-+				/* 1st port on VSC8234 */
-+				reg = <0x1c>;
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&enetc_port0>;
-+		__overlay__ {
-+			phy-handle = <&slot1_sgmii>;
-+			phy-mode = "sgmii";
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&mdio_slot2>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			/* 4 ports on VSC8514 */
-+			slot2_qsgmii0: ethernet-phy@8 {
-+				reg = <0x8>;
-+			};
-+
-+			slot2_qsgmii1: ethernet-phy@9 {
-+				reg = <0x9>;
-+			};
-+
-+			slot2_qsgmii2: ethernet-phy@a {
-+				reg = <0xa>;
-+			};
-+
-+			slot2_qsgmii3: ethernet-phy@b {
-+				reg = <0xb>;
-+			};
-+		};
-+	};
-+
-+	fragment@3 {
-+		target = <&mscc_felix_ports>;
-+		__overlay__ {
-+			port@0 {
-+				status = "okay";
-+				phy-handle = <&slot2_qsgmii0>;
-+				phy-mode = "qsgmii";
-+				managed = "in-band-status";
-+			};
-+
-+			port@1 {
-+				status = "okay";
-+				phy-handle = <&slot2_qsgmii1>;
-+				phy-mode = "qsgmii";
-+				managed = "in-band-status";
-+			};
-+
-+			port@2 {
-+				status = "okay";
-+				phy-handle = <&slot2_qsgmii2>;
-+				phy-mode = "qsgmii";
-+				managed = "in-band-status";
-+			};
-+
-+			port@3 {
-+				status = "okay";
-+				phy-handle = <&slot2_qsgmii3>;
-+				phy-mode = "qsgmii";
-+				managed = "in-band-status";
-+			};
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
-@@ -0,0 +1,66 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree fragment for LS1028A QDS board, serdes 85xx
-+ *
-+ * Copyright 2019 NXP
-+ *
-+ * Requires a LS1028A QDS board without lane B rework.
-+ * Requires a SCH-24801 card in slot 1.
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	fragment@0 {
-+		target = <&mdio_slot1>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			/* VSC8234 */
-+			slot1_sgmii0: ethernet-phy@1c {
-+				reg = <0x1c>;
-+			};
-+
-+			slot1_sgmii1: ethernet-phy@1d {
-+				reg = <0x1d>;
-+			};
-+
-+			slot1_sgmii2: ethernet-phy@1e {
-+				reg = <0x1e>;
-+			};
-+
-+			slot1_sgmii3: ethernet-phy@1f {
-+				reg = <0x1f>;
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&enetc_port0>;
-+		__overlay__ {
-+			phy-handle = <&slot1_sgmii0>;
-+			phy-mode = "sgmii";
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&mscc_felix_ports>;
-+		__overlay__ {
-+			port@1 {
-+				status = "okay";
-+				phy-handle = <&slot1_sgmii1>;
-+				phy-mode = "sgmii";
-+				managed = "in-band-status";
-+			};
-+
-+			port@2 {
-+				status = "okay";
-+				phy-handle = <&slot1_sgmii2>;
-+				phy-mode = "sgmii";
-+				managed = "in-band-status";
-+			};
-+		};
-+	};
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-8xxx.dtsi
-+++ /dev/null
-@@ -1,19 +0,0 @@
--// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
--/*
-- * Device Tree Include file for LS1028A QDS board, serdes 8xxx
-- *
-- * Copyright 2019 NXP
-- *
-- */
--
--&mdio_slot1 {
--	slot1_sgmii: ethernet-phy@1c {
--		/* 1st port on VSC8234 */
--		reg = <0x1c>;
--	};
--};
--
--&enetc_port0 {
--	phy-handle = <&slot1_sgmii>;
--	phy-connection-type = "sgmii";
--};
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
-@@ -0,0 +1,71 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree fragment for LS1028A QDS board, serdes 85xx
-+ *
-+ * Copyright 2019 NXP
-+ *
-+ * Requires a LS1028A QDS board without lane B rework.
-+ * Requires a SCH-24801 card in slot 1.
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	fragment@0 {
-+		target = <&mdio_slot1>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			/* VSC8234 */
-+			slot1_sgmii0: ethernet-phy@1c {
-+				reg = <0x1c>;
-+			};
-+
-+			slot1_sgmii1: ethernet-phy@1d {
-+				reg = <0x1d>;
-+			};
-+
-+			slot1_sgmii2: ethernet-phy@1e {
-+				reg = <0x1e>;
-+			};
-+
-+			slot1_sgmii3: ethernet-phy@1f {
-+				reg = <0x1f>;
-+			};
-+		};
-+	};
-+	fragment@1 {
-+		target = <&mscc_felix_ports>;
-+		__overlay__ {
-+			port@0 {
-+				status = "okay";
-+				phy-handle = <&slot1_sgmii0>;
-+				phy-mode = "sgmii";
-+				managed = "in-band-status";
-+			};
-+
-+			port@1 {
-+				status = "okay";
-+				phy-handle = <&slot1_sgmii1>;
-+				phy-mode = "sgmii";
-+				managed = "in-band-status";
-+			};
-+
-+			port@2 {
-+				status = "okay";
-+				phy-handle = <&slot1_sgmii2>;
-+				phy-mode = "sgmii";
-+				managed = "in-band-status";
-+			};
-+
-+			port@3 {
-+				status = "okay";
-+				phy-handle = <&slot1_sgmii3>;
-+				phy-mode = "sgmii";
-+				managed = "in-band-status";
-+			};
-+		};
-+	};
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtsi
-+++ /dev/null
-@@ -1,57 +0,0 @@
--// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
--/*
-- * Device Tree Include file for LS1028A QDS board, serdes 9999
-- *
-- * Copyright 2019 NXP
-- *
-- */
--
--&mdio_slot1 {
--	/* VSC8234 */
--	slot1_sgmii0: ethernet-phy@1c {
--		reg = <0x1c>;
--	};
--
--	slot1_sgmii1: ethernet-phy@1d {
--		reg = <0x1d>;
--	};
--
--	slot1_sgmii2: ethernet-phy@1e {
--		reg = <0x1e>;
--	};
--
--	slot1_sgmii3: ethernet-phy@1f {
--		reg = <0x1f>;
--	};
--};
--
--/* l2switch ports */
--&mscc_felix_ports {
--	port@0 {
--		status = "okay";
--		phy-handle = <&slot1_sgmii0>;
--		phy-mode = "sgmii";
--		managed = "in-band-status";
--	};
--
--	port@1 {
--		status = "okay";
--		phy-handle = <&slot1_sgmii1>;
--		phy-mode = "sgmii";
--		managed = "in-band-status";
--	};
--
--	port@2 {
--		status = "okay";
--		phy-handle = <&slot1_sgmii2>;
--		phy-mode = "sgmii";
--		managed = "in-band-status";
--	};
--
--	port@3 {
--		status = "okay";
--		phy-handle = <&slot1_sgmii3>;
--		phy-mode = "sgmii";
--		managed = "in-band-status";
--	};
--};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x3xx.dtsi
-+++ /dev/null
-@@ -1,61 +0,0 @@
--// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
--/*
-- * Device Tree Include file for LS1028A QDS board, serdes x3xx
-- *
-- * Copyright 2019 NXP
-- *
-- */
--
--&mdio_slot2 {
--	/* 4 ports on AQR412 */
--	slot2_qxgmii0: ethernet-phy@0 {
--		reg = <0x0>;
--		compatible = "ethernet-phy-ieee802.3-c45";
--	};
--
--	slot2_qxgmii1: ethernet-phy@1 {
--		reg = <0x1>;
--		compatible = "ethernet-phy-ieee802.3-c45";
--	};
--
--	slot2_qxgmii2: ethernet-phy@2 {
--		reg = <0x2>;
--		compatible = "ethernet-phy-ieee802.3-c45";
--	};
--
--	slot2_qxgmii3: ethernet-phy@3 {
--		reg = <0x3>;
--		compatible = "ethernet-phy-ieee802.3-c45";
--	};
--};
--
--/* l2switch ports */
--&mscc_felix_ports {
--	port@0 {
--		status = "okay";
--		phy-handle = <&slot2_qxgmii0>;
--		phy-mode = "usxgmii";
--		managed = "in-band-status";
--	};
--
--	port@1 {
--		status = "okay";
--		phy-handle = <&slot2_qxgmii1>;
--		phy-mode = "usxgmii";
--		managed = "in-band-status";
--	};
--
--	port@2 {
--		status = "okay";
--		phy-handle = <&slot2_qxgmii2>;
--		phy-mode = "usxgmii";
--		managed = "in-band-status";
--	};
--
--	port@3 {
--		status = "okay";
--		phy-handle = <&slot2_qxgmii3>;
--		phy-mode = "usxgmii";
--		managed = "in-band-status";
--	};
--};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x5xx.dtsi
-+++ /dev/null
-@@ -1,57 +0,0 @@
--// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
--/*
-- * Device Tree Include file for LS1028A QDS board, serdes x5xx
-- *
-- * Copyright 2019 NXP
-- *
-- */
--
--&mdio_slot2 {
--	/* 4 ports on VSC8514 */
--	slot2_qsgmii0: ethernet-phy@8 {
--		reg = <0x8>;
--	};
--
--	slot2_qsgmii1: ethernet-phy@9 {
--		reg = <0x9>;
--	};
--
--	slot2_qsgmii2: ethernet-phy@a {
--		reg = <0xa>;
--	};
--
--	slot2_qsgmii3: ethernet-phy@b {
--		reg = <0xb>;
--	};
--};
--
--/* l2switch ports */
--&mscc_felix_ports {
--	port@0 {
--		status = "okay";
--		phy-handle = <&slot2_qsgmii0>;
--		phy-mode = "qsgmii";
--		managed = "in-band-status";
--	};
--
--	port@1 {
--		status = "okay";
--		phy-handle = <&slot2_qsgmii1>;
--		phy-mode = "qsgmii";
--		managed = "in-band-status";
--	};
--
--	port@2 {
--		status = "okay";
--		phy-handle = <&slot2_qsgmii2>;
--		phy-mode = "qsgmii";
--		managed = "in-band-status";
--	};
--
--	port@3 {
--		status = "okay";
--		phy-handle = <&slot2_qsgmii3>;
--		phy-mode = "qsgmii";
--		managed = "in-band-status";
--	};
--};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-@@ -277,6 +277,3 @@
- 	lane-mapping = <0x4e>;
- 	status = "okay";
- };
--
--#include "fsl-ls1028a-qds-8xxx.dtsi"
--#include "fsl-ls1028a-qds-x5xx.dtsi"
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0114-arm64-dts-fsl-ls1028a-add-labels-to-Ethernet-switch-.patch b/target/linux/layerscape/patches-5.4/302-dts-0114-arm64-dts-fsl-ls1028a-add-labels-to-Ethernet-switch-.patch
deleted file mode 100644
index e4d5449d08..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0114-arm64-dts-fsl-ls1028a-add-labels-to-Ethernet-switch-.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From e8f521154dbf16a91cba229f7514cca8e136702e Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Mon, 6 Jan 2020 11:48:42 +0200
-Subject: [PATCH] arm64: dts: fsl-ls1028a: add labels to Ethernet switch ports
-
-Labels are used to name switch port net devices in Linux, use more
-convenient names to make it simpler for users.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -786,21 +786,25 @@
- 					mscc_felix_port0: port@0 {
- 						reg = <0>;
- 						status = "disabled";
-+						label = "swp0";
- 					};
- 
- 					mscc_felix_port1: port@1 {
- 						reg = <1>;
- 						status = "disabled";
-+						label = "swp1";
- 					};
- 
- 					mscc_felix_port2: port@2 {
- 						reg = <2>;
- 						status = "disabled";
-+						label = "swp2";
- 					};
- 
- 					mscc_felix_port3: port@3 {
- 						reg = <3>;
- 						status = "disabled";
-+						label = "swp3";
- 					};
- 
- 					/* internal to-cpu ports */
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0115-LF-789-2-arm64-dts-add-overlay-support-for-ls1028a-q.patch b/target/linux/layerscape/patches-5.4/302-dts-0115-LF-789-2-arm64-dts-add-overlay-support-for-ls1028a-q.patch
deleted file mode 100644
index 440e5839cd..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0115-LF-789-2-arm64-dts-add-overlay-support-for-ls1028a-q.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 911d3d1ea88ff6d56258d6173be7fc25290948a7 Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Fri, 10 Jan 2020 12:51:49 +0800
-Subject: [PATCH] LF-789-2 arm64: dts: add overlay support for ls1028a-qds
-
-Now seems only ls1028a-qds using overlay by adding fragment dtbs.
-Add their support in Makefile.
-
-This is one of approach suggested by DT maintainer Rob here:
-https://lore.kernel.org/patchwork/patch/821645/
-
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
-Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
-Reviewed-by: Alex Marginean <alexandru.marginean@nxp.com>
-Tested-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- arch/arm64/boot/dts/freescale/Makefile | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/Makefile
-+++ b/arch/arm64/boot/dts/freescale/Makefile
-@@ -1,4 +1,14 @@
- # SPDX-License-Identifier: GPL-2.0
-+
-+# required for overlay support
-+DTC_FLAGS_fsl-ls1028a-qds := -@
-+DTC_FLAGS_fsl-ls1028a-qds-13bb := -@
-+DTC_FLAGS_fsl-ls1028a-qds-65bb := -@
-+DTC_FLAGS_fsl-ls1028a-qds-7777 := -@
-+DTC_FLAGS_fsl-ls1028a-qds-85bb := -@
-+DTC_FLAGS_fsl-ls1028a-qds-899b := -@
-+DTC_FLAGS_fsl-ls1028a-qds-9999 := -@
-+
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0116-LF-881-arm64-dts-add-a-dts-file-for-dpdk.patch b/target/linux/layerscape/patches-5.4/302-dts-0116-LF-881-arm64-dts-add-a-dts-file-for-dpdk.patch
deleted file mode 100644
index 311d73b475..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0116-LF-881-arm64-dts-add-a-dts-file-for-dpdk.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From f0f46229b2232595a1afde10f6f17e512c004042 Mon Sep 17 00:00:00 2001
-From: Gagandeep Singh <g.singh@nxp.com>
-Date: Thu, 6 Feb 2020 13:01:10 +0000
-Subject: [PATCH] LF-881: arm64: dts: add a dts file for dpdk
-
-A new device tree file fsl-ls1028a-rdb-dpdk.dts is added
-for user space networking.
-
-Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
-Reviewed-by: Alex Marginean <alexandru.marginean@nxp.com>
-Reviewed-by: Li Yang <leoyang.li@nxp.com>
----
- arch/arm64/boot/dts/freescale/Makefile             |  1 +
- .../boot/dts/freescale/fsl-ls1028a-rdb-dpdk.dts    | 89 ++++++++++++++++++++++
- 2 files changed, 90 insertions(+)
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb-dpdk.dts
-
---- a/arch/arm64/boot/dts/freescale/Makefile
-+++ b/arch/arm64/boot/dts/freescale/Makefile
-@@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb-dpdk.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds-sdk.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb-dpdk.dts
-@@ -0,0 +1,89 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * NXP LS1028A RDB Board device tree file for DPDK
-+ *
-+ * Copyright 2018-2020 NXP
-+ */
-+
-+/dts-v1/;
-+#include "fsl-ls1028a-rdb.dts"
-+
-+&enetc_port0 {
-+	status = "okay";
-+	/delete-property/ phy-handle;
-+	/delete-property/ phy-connection-type;
-+	/delete-node/ mdio;
-+
-+	fixed-link {
-+		speed = <1000>;
-+		full-duplex;
-+	};
-+};
-+
-+/delete-node/ &enetc_mdio_pf3;
-+
-+/* l2switch ports */
-+&mscc_felix_ports {
-+	port@0 {
-+		status = "okay";
-+		phy-mode = "qsgmii";
-+		/delete-property/ managed;
-+		/delete-property/ phy-handle;
-+
-+		fixed-link {
-+			speed = <1000>;
-+			full-duplex;
-+		};
-+	};
-+
-+	port@1 {
-+		status = "okay";
-+		phy-mode = "qsgmii";
-+		/delete-property/ managed;
-+		/delete-property/ phy-handle;
-+
-+		fixed-link {
-+			speed = <1000>;
-+			full-duplex;
-+		};
-+	};
-+
-+	port@2 {
-+		status = "okay";
-+		phy-mode = "qsgmii";
-+		/delete-property/ managed;
-+		/delete-property/ phy-handle;
-+
-+		fixed-link {
-+			speed = <1000>;
-+			full-duplex;
-+		};
-+	};
-+
-+	port@3 {
-+		status = "okay";
-+		phy-mode = "qsgmii";
-+		/delete-property/ managed;
-+		/delete-property/ phy-handle;
-+
-+		fixed-link {
-+			speed = <1000>;
-+			full-duplex;
-+		};
-+	};
-+
-+	port@5 {
-+		status = "okay";
-+		/delete-property/ managed;
-+		/delete-property/ phy-handle;
-+
-+		fixed-link {
-+			speed = <1000>;
-+			full-duplex;
-+		};
-+	};
-+};
-+
-+&enetc_port3 {
-+	status = "okay";
-+};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0117-arm-dts-ls1021a-Add-LS1021A-IOT-board-support.patch b/target/linux/layerscape/patches-5.4/302-dts-0117-arm-dts-ls1021a-Add-LS1021A-IOT-board-support.patch
deleted file mode 100644
index 9963062195..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0117-arm-dts-ls1021a-Add-LS1021A-IOT-board-support.patch
+++ /dev/null
@@ -1,291 +0,0 @@
-From 55e00e402d6143aeb153761f8144d9fee5f1f009 Mon Sep 17 00:00:00 2001
-From: Biwen Li <biwen.li@nxp.com>
-Date: Fri, 26 Oct 2018 16:00:37 +0800
-Subject: [PATCH] arm: dts: ls1021a: Add LS1021A-IOT board support
-
-Signed-off-by: Biwen Li <biwen.li@nxp.com>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- arch/arm/boot/dts/Makefile        |   3 +-
- arch/arm/boot/dts/ls1021a-iot.dts | 262 ++++++++++++++++++++++++++++++++++++++
- 2 files changed, 264 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/ls1021a-iot.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -611,7 +611,8 @@ dtb-$(CONFIG_SOC_LS1021A) += \
- 	ls1021a-moxa-uc-8410a.dtb \
- 	ls1021a-qds.dtb \
- 	ls1021a-tsn.dtb \
--	ls1021a-twr.dtb
-+	ls1021a-twr.dtb \
-+	ls1021a-iot.dtb
- dtb-$(CONFIG_SOC_VF610) += \
- 	vf500-colibri-eval-v3.dtb \
- 	vf610-bk4.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/ls1021a-iot.dts
-@@ -0,0 +1,262 @@
-+/*
-+ * Copyright 2013-2016 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+/dts-v1/;
-+#include "ls1021a.dtsi"
-+
-+/ {
-+	model = "LS1021A IOT Board";
-+
-+	sys_mclk: clock-mclk {
-+		compatible = "fixed-clock";
-+		#clock-cells = <0>;
-+		clock-frequency = <24576000>;
-+	};
-+
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		reg_3p3v: regulator@0 {
-+			compatible = "regulator-fixed";
-+			reg = <0>;
-+			regulator-name = "3P3V";
-+			regulator-min-microvolt = <3300000>;
-+			regulator-max-microvolt = <3300000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_2p5v: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "2P5V";
-+			regulator-min-microvolt = <2500000>;
-+			regulator-max-microvolt = <2500000>;
-+			regulator-always-on;
-+		};
-+	};
-+
-+	sound {
-+		compatible = "simple-audio-card";
-+		simple-audio-card,format = "i2s";
-+		simple-audio-card,widgets =
-+			"Microphone", "Microphone Jack",
-+			"Headphone", "Headphone Jack",
-+			"Speaker", "Speaker Ext",
-+			"Line", "Line In Jack";
-+		simple-audio-card,routing =
-+			"MIC_IN", "Microphone Jack",
-+			"Microphone Jack", "Mic Bias",
-+			"LINE_IN", "Line In Jack",
-+			"Headphone Jack", "HP_OUT",
-+			"Speaker Ext", "LINE_OUT";
-+
-+		simple-audio-card,cpu {
-+			sound-dai = <&sai2>;
-+			frame-master;
-+			bitclock-master;
-+		};
-+
-+		simple-audio-card,codec {
-+			sound-dai = <&codec>;
-+			frame-master;
-+			bitclock-master;
-+		};
-+	};
-+
-+	firmware {
-+		optee {
-+			compatible = "linaro,optee-tz";
-+			method = "smc";
-+			};
-+		};
-+};
-+
-+&enet0 {
-+	tbi-handle = <&tbi1>;
-+	phy-handle = <&phy1>;
-+	phy-connection-type = "sgmii";
-+	status = "okay";
-+};
-+
-+&enet1 {
-+	tbi-handle = <&tbi1>;
-+	phy-handle = <&phy3>;
-+	phy-connection-type = "sgmii";
-+	status = "okay";
-+};
-+
-+&enet2 {
-+	fixed-link = <0 1 1000 0 0>;
-+	phy-connection-type = "rgmii-id";
-+	status = "okay";
-+};
-+
-+&can0{
-+	status = "disabled";
-+};
-+
-+&can1{
-+	status = "disabled";
-+};
-+
-+&can2{
-+	status = "disabled";
-+};
-+
-+&can3{
-+	status = "okay";
-+};
-+
-+&esdhc{
-+	status = "okay";
-+};
-+
-+&i2c0 {
-+	status = "okay";
-+
-+	max1239@35 {
-+		compatible = "maxim,max1239";
-+		reg = <0x35>;
-+		#io-channel-cells = <1>;
-+	};
-+
-+	codec: sgtl5000@2a {
-+               #sound-dai-cells=<0x0>;
-+		compatible = "fsl,sgtl5000";
-+		reg = <0x2a>;
-+		VDDA-supply = <&reg_3p3v>;
-+		VDDIO-supply = <&reg_2p5v>;
-+		clocks = <&sys_mclk 1>;
-+	};
-+
-+	pca9555: pca9555@23 {
-+		compatible = "nxp,pca9555";
-+		/*pinctrl-names = "default";*/
-+		/*interrupt-parent = <&gpio2>;
-+		interrupts = <19 0x2>;*/
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+		interrupt-controller;
-+		#interrupt-cells = <2>;
-+		reg = <0x23>;
-+	};
-+
-+	ina220@44 {
-+		compatible = "ti,ina220";
-+		reg = <0x44>;
-+		shunt-resistor = <1000>;
-+	};
-+
-+	ina220@45 {
-+		compatible = "ti,ina220";
-+		reg = <0x45>;
-+		shunt-resistor = <1000>;
-+	};
-+
-+	lm75b@48 {
-+                compatible = "nxp,lm75a";
-+                reg = <0x48>;
-+        };
-+
-+	adt7461a@4c {
-+		compatible = "adt7461a";
-+		reg = <0x4c>;
-+	};
-+
-+	hdmi: sii9022a@39 {
-+		compatible = "fsl,sii902x";
-+		reg = <0x39>;
-+		interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>;
-+	};
-+};
-+
-+&i2c1 {
-+	status = "disabled";
-+};
-+
-+&ifc {
-+	status = "disabled";
-+};
-+
-+&lpuart0 {
-+	status = "okay";
-+};
-+
-+&mdio0 {
-+	phy0: ethernet-phy@0 {
-+		reg = <0x0>;
-+	};
-+	phy1: ethernet-phy@1 {
-+		reg = <0x1>;
-+	};
-+	phy2: ethernet-phy@2 {
-+		reg = <0x2>;
-+	};
-+	phy3: ethernet-phy@3 {
-+		reg = <0x3>;
-+	};
-+	tbi1: tbi-phy@1f {
-+		reg = <0x1f>;
-+		device_type = "tbi-phy";
-+	};
-+};
-+
-+&qspi {
-+	num-cs = <2>;
-+	status = "okay";
-+
-+	qflash0: s25fl128s@0 {
-+		compatible = "spansion,s25fl129p1";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+	};
-+};
-+
-+&sai2 {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
-+
-+&uart1 {
-+	status = "okay";
-+};
-+
-+&dcu {
-+	display = <&display>;
-+	status = "okay";
-+
-+	display: display@0 {
-+		bits-per-pixel = <24>;
-+
-+		display-timings {
-+			native-mode = <&timing0>;
-+
-+			timing0: mode0 {
-+				clock-frequency = <25000000>;
-+				hactive = <640>;
-+				vactive = <480>;
-+				hback-porch = <80>;
-+				hfront-porch = <80>;
-+				vback-porch = <16>;
-+				vfront-porch = <16>;
-+				hsync-len = <12>;
-+				vsync-len = <2>;
-+				hsync-active = <1>;
-+				vsync-active = <1>;
-+			};
-+		};
-+	};
-+};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0118-add-DTS-for-Traverse-LS1043-Boards.patch b/target/linux/layerscape/patches-5.4/302-dts-0118-add-DTS-for-Traverse-LS1043-Boards.patch
deleted file mode 100644
index 904774d83d..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0118-add-DTS-for-Traverse-LS1043-Boards.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 5b35aae22b4ca2400e49561c9267aa01346f91d4 Mon Sep 17 00:00:00 2001
-From: Mathew McBride <matt@traverse.com.au>
-Date: Tue, 17 Apr 2018 10:01:03 +1000
-Subject: [PATCH] add DTS for Traverse LS1043 Boards
-
-Signed-off-by: Mathew McBride <matt@traverse.com.au>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- arch/arm64/boot/dts/freescale/Makefile             |  3 +++
- arch/arm64/boot/dts/freescale/traverse-ls1043s.dts | 29 ++++++++++++++++++++++
- arch/arm64/boot/dts/freescale/traverse-ls1043v.dts | 29 ++++++++++++++++++++++
- 3 files changed, 61 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/Makefile
-+++ b/arch/arm64/boot/dts/freescale/Makefile
-@@ -48,6 +48,9 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
- 
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += traverse-ls1043v.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += traverse-ls1043s.dtb
-+
- dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
- dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
- dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
---- a/arch/arm64/boot/dts/freescale/traverse-ls1043s.dts
-+++ b/arch/arm64/boot/dts/freescale/traverse-ls1043s.dts
-@@ -330,3 +330,32 @@
- &sata {
- 	status = "disabled";
- };
-+
-+/* Additions for Layerscape SDK (4.4/4.9) Kernel only
-+ * These kernels need additional setup for FMan/QMan DMA shared memory
-+ */
-+
-+#include "qoriq-qman-portals-sdk.dtsi"
-+#include "qoriq-bman-portals-sdk.dtsi"
-+
-+&bman_fbpr {
-+	compatible = "fsl,bman-fbpr";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+&qman_fqd {
-+	compatible = "fsl,qman-fqd";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+&qman_pfdr {
-+	compatible = "fsl,qman-pfdr";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+
-+&soc {
-+#include "qoriq-dpaa-eth.dtsi"
-+#include "qoriq-fman3-0-6oh.dtsi"
-+};
-+
-+&fman0 {
-+	compatible = "fsl,fman", "simple-bus";
-+};
---- a/arch/arm64/boot/dts/freescale/traverse-ls1043v.dts
-+++ b/arch/arm64/boot/dts/freescale/traverse-ls1043v.dts
-@@ -251,3 +251,32 @@
- &sata {
- 	status = "disabled";
- };
-+
-+/* Additions for Layerscape SDK (4.4/4.9) Kernel only
-+ * These kernels need additional setup for FMan/QMan DMA shared memory
-+ */
-+
-+#include "qoriq-qman-portals-sdk.dtsi"
-+#include "qoriq-bman-portals-sdk.dtsi"
-+
-+&bman_fbpr {
-+	compatible = "fsl,bman-fbpr";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+&qman_fqd {
-+	compatible = "fsl,qman-fqd";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+&qman_pfdr {
-+	compatible = "fsl,qman-pfdr";
-+	alloc-ranges = <0 0 0x10000 0>;
-+};
-+
-+&soc {
-+#include "qoriq-dpaa-eth.dtsi"
-+#include "qoriq-fman3-0-6oh.dtsi"
-+};
-+
-+&fman0 {
-+	compatible = "fsl,fman", "simple-bus";
-+};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0119-arm64-dts-lx2160a-add-more-thermal-zone-support.patch b/target/linux/layerscape/patches-5.4/302-dts-0119-arm64-dts-lx2160a-add-more-thermal-zone-support.patch
deleted file mode 100644
index 5a29451564..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0119-arm64-dts-lx2160a-add-more-thermal-zone-support.patch
+++ /dev/null
@@ -1,184 +0,0 @@
-From eba73069e7f6ac3bcb3669d980994ec42ddd810a Mon Sep 17 00:00:00 2001
-From: Yuantian Tang <andy.tang@nxp.com>
-Date: Thu, 16 Apr 2020 17:40:06 +0800
-Subject: [PATCH] arm64: dts: lx2160a: add more thermal zone support
-
-There are 7 thermal zones in lx2160a soc. Add the
-rest thermal zone node to enable them.
-Also correct one of the values for tmu-calibration property.
-
-Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
----
- .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 130 +++++++++++++++++-
- 1 file changed, 125 insertions(+), 5 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
-@@ -440,19 +440,19 @@
- 	};
- 
- 	thermal-zones {
--		core_thermal1: core-thermal1 {
-+		cluster6-7 {
- 			polling-delay-passive = <1000>;
- 			polling-delay = <5000>;
- 			thermal-sensors = <&tmu 0>;
- 
- 			trips {
--				core_cluster_alert: core-cluster-alert {
-+				cluster6_7_alert: cluster6-7-alert {
- 					temperature = <85000>;
- 					hysteresis = <2000>;
- 					type = "passive";
- 				};
- 
--				core_cluster_crit: core-cluster-crit {
-+				cluster6_7_crit: cluster6-7-crit {
- 					temperature = <95000>;
- 					hysteresis = <2000>;
- 					type = "critical";
-@@ -461,7 +461,7 @@
- 
- 			cooling-maps {
- 				map0 {
--					trip = <&core_cluster_alert>;
-+					trip = <&cluster6_7_alert>;
- 					cooling-device =
- 						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- 						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-@@ -482,6 +482,126 @@
- 				};
- 			};
- 		};
-+
-+		ddr-cluster5 {
-+			polling-delay-passive = <1000>;
-+			polling-delay = <5000>;
-+			thermal-sensors = <&tmu 1>;
-+
-+			trips {
-+				ddr-cluster5-alert {
-+					temperature = <85000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+
-+				ddr-cluster5-crit {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+			};
-+		};
-+
-+		wriop {
-+			polling-delay-passive = <1000>;
-+			polling-delay = <5000>;
-+			thermal-sensors = <&tmu 2>;
-+
-+			trips {
-+				wriop-alert {
-+					temperature = <85000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+
-+				wriop-crit {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+			};
-+		};
-+
-+		dce-qbman-hsio2 {
-+			polling-delay-passive = <1000>;
-+			polling-delay = <5000>;
-+			thermal-sensors = <&tmu 3>;
-+
-+			trips {
-+				dce-qbman-alert {
-+					temperature = <85000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+
-+				dce-qbman-crit {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+			};
-+		};
-+
-+		ccn-dpaa-tbu {
-+			polling-delay-passive = <1000>;
-+			polling-delay = <5000>;
-+			thermal-sensors = <&tmu 4>;
-+
-+			trips {
-+				ccn-dpaa-alert {
-+					temperature = <85000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+
-+				ccn-dpaa-crit {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+			};
-+		};
-+
-+		cluster4-hsio3 {
-+			polling-delay-passive = <1000>;
-+			polling-delay = <5000>;
-+			thermal-sensors = <&tmu 5>;
-+
-+			trips {
-+				clust4-hsio3-alert {
-+					temperature = <85000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+
-+				clust4-hsio3-crit {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+			};
-+		};
-+
-+		cluster2-3 {
-+			polling-delay-passive = <1000>;
-+			polling-delay = <5000>;
-+			thermal-sensors = <&tmu 6>;
-+
-+			trips {
-+				cluster2-3-alert {
-+					temperature = <85000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+
-+				cluster2-3-crit {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+			};
-+		};
- 	};
- 
- 	soc {
-@@ -760,7 +880,7 @@
- 				/* Calibration data group 1 */
- 				<0x00000000 0x00000035
- 				/* Calibration data group 2 */
--				0x00010001 0x00000154>;
-+				0x00000001 0x00000154>;
- 			little-endian;
- 			#thermal-sensor-cells = <1>;
- 		};
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0120-arm64-dts-ls1046a-fix-ippdexpcr-offset-not-correct.patch b/target/linux/layerscape/patches-5.4/302-dts-0120-arm64-dts-ls1046a-fix-ippdexpcr-offset-not-correct.patch
deleted file mode 100644
index 43700b8159..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0120-arm64-dts-ls1046a-fix-ippdexpcr-offset-not-correct.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From d589ed7b9aa91de94eb558ae83ccebd59b881d61 Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Tue, 10 Mar 2020 21:06:29 +0800
-Subject: [PATCH] arm64: dts: ls1046a: fix ippdexpcr offset not correct
-
-The wrong offset of ippdexpcr in dtsi causes RCPM driver did not
-program ippdexpcr properly, which lead to LPM20 cannot exit by wakeup
-source.
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
-@@ -809,7 +809,7 @@
- 
- 		rcpm: rcpm@1ee208c {
- 			compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+";
--			reg = <0x0 0x1ee208c 0x0 0x4>;
-+			reg = <0x0 0x1ee2140 0x0 0x4>;
- 			#fsl,rcpm-wakeup-cells = <1>;
- 		};
- 
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0121-arm64-dts-ls1043a-update-USB-nodes-status-to-match-b.patch b/target/linux/layerscape/patches-5.4/302-dts-0121-arm64-dts-ls1043a-update-USB-nodes-status-to-match-b.patch
deleted file mode 100644
index c83fad33ab..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0121-arm64-dts-ls1043a-update-USB-nodes-status-to-match-b.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 2dfd145470894296d70873942ae056340e3fd78d Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Tue, 7 Jul 2020 15:40:31 +0800
-Subject: [PATCH] arm64: dts: ls1043a: update USB nodes status to match board
- config
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-ls1043a-rdb and ls1043a-qds board’s default HW config (such as
-pin mux selection) would not enable some USB controllers’
-data path, which causing over-current detected on those
-controllers. This will hit the case of ‘xhci driver prevent bus suspend
-if a root hub port detected over-current condition’, causing system
-failed to be suspended. So disable them in device tree to resolve this
-issue.
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 4 ++++
- arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 8 ++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi    | 3 +++
- 3 files changed, 15 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
-@@ -167,6 +167,10 @@
- 	};
- };
- 
-+&usb0 {
-+	status = "okay";
-+};
-+
- #include "fsl-ls1043-post.dtsi"
- 
- &fman0 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
-@@ -212,3 +212,11 @@
- 		};
- 	};
- };
-+
-+&usb0 {
-+	status = "okay";
-+};
-+
-+&usb1 {
-+	status = "okay";
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -707,6 +707,7 @@
- 				snps,host-vbus-glitches;
- 				configure-gfladj;
- 				dma-coherent;
-+				status = "disabled";
- 			};
- 
- 			usb1: usb3@3000000 {
-@@ -722,6 +723,7 @@
- 				snps,host-vbus-glitches;
- 				configure-gfladj;
- 				dma-coherent;
-+				status = "disabled";
- 			};
- 
- 			usb2: usb3@3100000 {
-@@ -737,6 +739,7 @@
- 				snps,host-vbus-glitches;
- 				configure-gfladj;
- 				dma-coherent;
-+				status = "disabled";
- 			};
- 
- 			sata: sata@3200000 {
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0122-arm64-dts-ls1043a-remove-thermal-zone-5-from-dts.patch b/target/linux/layerscape/patches-5.4/302-dts-0122-arm64-dts-ls1043a-remove-thermal-zone-5-from-dts.patch
deleted file mode 100644
index 887844fc0e..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0122-arm64-dts-ls1043a-remove-thermal-zone-5-from-dts.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From aa5e9dc53636e5ae40fc1460c7d3897c2d8588fe Mon Sep 17 00:00:00 2001
-From: Yuantian Tang <andy.tang@nxp.com>
-Date: Mon, 9 Mar 2020 10:44:54 +0800
-Subject: [PATCH] arm64: dts: ls1043a: remove thermal zone 5 from dts
-
-Thermal monitor zone 5 does not exist. So remove it
-from dts.
-
-Signed-off-by: Yuantian <andy.tang@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 4 ----
- 1 file changed, 4 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -919,8 +919,4 @@
- 	thermal-zone4 {
- 		status = "okay";
- 	};
--
--	thermal-zone5 {
--		status = "okay";
--	};
- };
diff --git a/target/linux/layerscape/patches-5.4/302-v5.7-dts-0119-arm64-dts-ls1043a-rdb-add-compatible-for-board.patch b/target/linux/layerscape/patches-5.4/302-v5.7-dts-0119-arm64-dts-ls1043a-rdb-add-compatible-for-board.patch
deleted file mode 100644
index 0c6b8e2863..0000000000
--- a/target/linux/layerscape/patches-5.4/302-v5.7-dts-0119-arm64-dts-ls1043a-rdb-add-compatible-for-board.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From fa578d4e9fbef8928a45edd904dafb1e3334417e Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Thu, 30 Apr 2020 10:56:46 +0800
-Subject: [PATCH] arm64: dts: ls1043a-rdb: add compatible for board
-
-Add compatible for board to identify.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
-@@ -13,6 +13,7 @@
- 
- / {
- 	model = "LS1043A RDB Board";
-+	compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
- 
- 	aliases {
- 		serial0 = &duart0;
diff --git a/target/linux/layerscape/patches-5.4/303-core-0001-net-readd-skb_recycle.patch b/target/linux/layerscape/patches-5.4/303-core-0001-net-readd-skb_recycle.patch
deleted file mode 100644
index e296df502e..0000000000
--- a/target/linux/layerscape/patches-5.4/303-core-0001-net-readd-skb_recycle.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 446a17652a69f749dd7a50b28e984c4904dc3aaf Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@freescale.com>
-Date: Tue, 5 Jan 2016 12:12:07 +0200
-Subject: [PATCH] net: readd skb_recycle()
-
-Adding back skb_recycle() as it's used by the DPAA Ethernet driver.
-This was removed from the upstream kernel because it was lacking users.
-
-Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
----
- include/linux/skbuff.h |  1 +
- net/core/skbuff.c      | 26 ++++++++++++++++++++++++++
- 2 files changed, 27 insertions(+)
-
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -1025,6 +1025,7 @@ void skb_dump(const char *level, const s
- void skb_tx_error(struct sk_buff *skb);
- void consume_skb(struct sk_buff *skb);
- void __consume_stateless_skb(struct sk_buff *skb);
-+void skb_recycle(struct sk_buff *skb);
- void  __kfree_skb(struct sk_buff *skb);
- extern struct kmem_cache *skbuff_head_cache;
- 
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -945,6 +945,32 @@ void napi_consume_skb(struct sk_buff *sk
- }
- EXPORT_SYMBOL(napi_consume_skb);
- 
-+/**
-+ * 	skb_recycle - clean up an skb for reuse
-+ * 	@skb: buffer
-+ *
-+ * 	Recycles the skb to be reused as a receive buffer. This
-+ * 	function does any necessary reference count dropping, and
-+ * 	cleans up the skbuff as if it just came from __alloc_skb().
-+ */
-+void skb_recycle(struct sk_buff *skb)
-+{
-+	struct skb_shared_info *shinfo;
-+	u8 head_frag = skb->head_frag;
-+
-+	skb_release_head_state(skb);
-+
-+	shinfo = skb_shinfo(skb);
-+	memset(shinfo, 0, offsetof(struct skb_shared_info, dataref));
-+	atomic_set(&shinfo->dataref, 1);
-+
-+	memset(skb, 0, offsetof(struct sk_buff, tail));
-+	skb->data = skb->head + NET_SKB_PAD;
-+	skb->head_frag = head_frag;
-+	skb_reset_tail_pointer(skb);
-+}
-+EXPORT_SYMBOL(skb_recycle);
-+
- /* Make sure a field is enclosed inside headers_start/headers_end section */
- #define CHECK_SKB_FIELD(field) \
- 	BUILD_BUG_ON(offsetof(struct sk_buff, field) <		\
diff --git a/target/linux/layerscape/patches-5.4/303-core-0002-drivers-base-add-sysfs-entries-for-suppliers-and-con.patch b/target/linux/layerscape/patches-5.4/303-core-0002-drivers-base-add-sysfs-entries-for-suppliers-and-con.patch
deleted file mode 100644
index 4cad5e2d13..0000000000
--- a/target/linux/layerscape/patches-5.4/303-core-0002-drivers-base-add-sysfs-entries-for-suppliers-and-con.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From 4a84eacedc55e78c8f64a5a4f9ade6e285844b85 Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Mon, 25 Jun 2018 13:19:53 +0300
-Subject: [PATCH] drivers/base: add sysfs entries for suppliers and consumers
-
-Instead of scraping dmesg for messages such as 'Linked as a consumer to'
-or 'Dropping the link to' export two new sysfs entries in the device
-folder that list the consumer and supplier devices.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
----
- Documentation/ABI/testing/sysfs-devices-links | 13 +++++++++
- drivers/base/core.c                           | 42 +++++++++++++++++++++++++++
- 2 files changed, 55 insertions(+)
- create mode 100644 Documentation/ABI/testing/sysfs-devices-links
-
---- /dev/null
-+++ b/Documentation/ABI/testing/sysfs-devices-links
-@@ -0,0 +1,13 @@
-+What:		/sys/devices/.../consumers
-+Date:		October 2018
-+Contact:	Ioana Ciornei <ioana.ciornei@nxp.com>
-+Description:
-+		Read-only attribute that lists the current "consumers" of
-+		a specific device.
-+
-+What:		/sys/devices/.../suppliers
-+Date:		October 2018
-+Contact:	Ioana Ciornei <ioana.ciornei@nxp.com>
-+Description:
-+		Read-only attribute that lists the current "suppliers" of
-+		a specific device.
---- a/drivers/base/core.c
-+++ b/drivers/base/core.c
-@@ -1333,6 +1333,34 @@ static ssize_t online_store(struct devic
- }
- static DEVICE_ATTR_RW(online);
- 
-+static ssize_t suppliers_show(struct device *dev, struct device_attribute *attr,
-+			      char *buf)
-+{
-+	struct device_link *link;
-+	size_t count = 0;
-+
-+	list_for_each_entry(link, &dev->links.suppliers, c_node)
-+		count += scnprintf(buf + count, PAGE_SIZE - count, "%s\n",
-+				   dev_name(link->supplier));
-+
-+	return count;
-+}
-+static DEVICE_ATTR_RO(suppliers);
-+
-+static ssize_t consumers_show(struct device *dev, struct device_attribute *attr,
-+			      char *buf)
-+{
-+	struct device_link *link;
-+	size_t count = 0;
-+
-+	list_for_each_entry(link, &dev->links.consumers, s_node)
-+		count += scnprintf(buf + count, PAGE_SIZE - count, "%s\n",
-+				   dev_name(link->consumer));
-+
-+	return count;
-+}
-+static DEVICE_ATTR_RO(consumers);
-+
- int device_add_groups(struct device *dev, const struct attribute_group **groups)
- {
- 	return sysfs_create_groups(&dev->kobj, groups);
-@@ -1504,8 +1532,20 @@ static int device_add_attrs(struct devic
- 			goto err_remove_dev_groups;
- 	}
- 
-+	error = device_create_file(dev, &dev_attr_suppliers);
-+	if (error)
-+		goto err_remove_online;
-+
-+	error = device_create_file(dev, &dev_attr_consumers);
-+	if (error)
-+		goto err_remove_suppliers;
-+
- 	return 0;
- 
-+ err_remove_suppliers:
-+	device_remove_file(dev, &dev_attr_suppliers);
-+ err_remove_online:
-+	device_remove_file(dev, &dev_attr_online);
-  err_remove_dev_groups:
- 	device_remove_groups(dev, dev->groups);
-  err_remove_type_groups:
-@@ -1523,6 +1563,8 @@ static void device_remove_attrs(struct d
- 	struct class *class = dev->class;
- 	const struct device_type *type = dev->type;
- 
-+	device_remove_file(dev, &dev_attr_consumers);
-+	device_remove_file(dev, &dev_attr_suppliers);
- 	device_remove_file(dev, &dev_attr_online);
- 	device_remove_groups(dev, dev->groups);
- 
diff --git a/target/linux/layerscape/patches-5.4/303-core-0003-cgroup-let-a-symlink-too-be-created-with-a-cftype-fi.patch b/target/linux/layerscape/patches-5.4/303-core-0003-cgroup-let-a-symlink-too-be-created-with-a-cftype-fi.patch
deleted file mode 100644
index f7edb7411d..0000000000
--- a/target/linux/layerscape/patches-5.4/303-core-0003-cgroup-let-a-symlink-too-be-created-with-a-cftype-fi.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From 3b4d888114a5f6c1e848f892a2236db4ccf8345f Mon Sep 17 00:00:00 2001
-From: Angelo Ruocco <angeloruocco90@gmail.com>
-Date: Tue, 21 May 2019 10:01:54 +0200
-Subject: [PATCH] cgroup: let a symlink too be created with a cftype file
-
-This commit enables a cftype to have a symlink (of any name) that
-points to the file associated with the cftype.
-
-Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com>
-Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
-Signed-off-by: Jens Axboe <axboe@kernel.dk>
-(cherry picked from commit 54b7b868e826b294687c439b68ec55fe20cafe5b)
-Signed-off-by: Li Yang <leoyang.li@nxp.com>
----
- include/linux/cgroup-defs.h |  3 +++
- kernel/cgroup/cgroup.c      | 33 +++++++++++++++++++++++++++++----
- 2 files changed, 32 insertions(+), 4 deletions(-)
-
---- a/include/linux/cgroup-defs.h
-+++ b/include/linux/cgroup-defs.h
-@@ -106,6 +106,8 @@ enum {
- 	CFTYPE_WORLD_WRITABLE	= (1 << 4),	/* (DON'T USE FOR NEW FILES) S_IWUGO */
- 	CFTYPE_DEBUG		= (1 << 5),	/* create when cgroup_debug */
- 
-+	CFTYPE_SYMLINKED	= (1 << 6),	/* pointed to by symlink too */
-+
- 	/* internal flags, do not use outside cgroup core proper */
- 	__CFTYPE_ONLY_ON_DFL	= (1 << 16),	/* only on default hierarchy */
- 	__CFTYPE_NOT_ON_DFL	= (1 << 17),	/* not on default hierarchy */
-@@ -544,6 +546,7 @@ struct cftype {
- 	 * end of cftype array.
- 	 */
- 	char name[MAX_CFTYPE_NAME];
-+	char link_name[MAX_CFTYPE_NAME];
- 	unsigned long private;
- 
- 	/*
---- a/kernel/cgroup/cgroup.c
-+++ b/kernel/cgroup/cgroup.c
-@@ -1465,8 +1465,8 @@ struct cgroup *task_cgroup_from_root(str
- 
- static struct kernfs_syscall_ops cgroup_kf_syscall_ops;
- 
--static char *cgroup_file_name(struct cgroup *cgrp, const struct cftype *cft,
--			      char *buf)
-+static char *cgroup_fill_name(struct cgroup *cgrp, const struct cftype *cft,
-+			      char *buf, bool write_link_name)
- {
- 	struct cgroup_subsys *ss = cft->ss;
- 
-@@ -1476,13 +1476,26 @@ static char *cgroup_file_name(struct cgr
- 
- 		snprintf(buf, CGROUP_FILE_NAME_MAX, "%s%s.%s",
- 			 dbg, cgroup_on_dfl(cgrp) ? ss->name : ss->legacy_name,
--			 cft->name);
-+			 write_link_name ? cft->link_name : cft->name);
- 	} else {
--		strscpy(buf, cft->name, CGROUP_FILE_NAME_MAX);
-+		strscpy(buf, write_link_name ? cft->link_name : cft->name,
-+			CGROUP_FILE_NAME_MAX);
- 	}
- 	return buf;
- }
- 
-+static char *cgroup_file_name(struct cgroup *cgrp, const struct cftype *cft,
-+			      char *buf)
-+{
-+	return cgroup_fill_name(cgrp, cft, buf, false);
-+}
-+
-+static char *cgroup_link_name(struct cgroup *cgrp, const struct cftype *cft,
-+			      char *buf)
-+{
-+	return cgroup_fill_name(cgrp, cft, buf, true);
-+}
-+
- /**
-  * cgroup_file_mode - deduce file mode of a control file
-  * @cft: the control file in question
-@@ -1641,6 +1654,9 @@ static void cgroup_rm_file(struct cgroup
- 	}
- 
- 	kernfs_remove_by_name(cgrp->kn, cgroup_file_name(cgrp, cft, name));
-+	if (cft->flags & CFTYPE_SYMLINKED)
-+		kernfs_remove_by_name(cgrp->kn,
-+				      cgroup_link_name(cgrp, cft, name));
- }
- 
- /**
-@@ -3896,6 +3912,7 @@ static int cgroup_add_file(struct cgroup
- {
- 	char name[CGROUP_FILE_NAME_MAX];
- 	struct kernfs_node *kn;
-+	struct kernfs_node *kn_link;
- 	struct lock_class_key *key = NULL;
- 	int ret;
- 
-@@ -3926,6 +3943,14 @@ static int cgroup_add_file(struct cgroup
- 		spin_unlock_irq(&cgroup_file_kn_lock);
- 	}
- 
-+	if (cft->flags & CFTYPE_SYMLINKED) {
-+		kn_link = kernfs_create_link(cgrp->kn,
-+					     cgroup_link_name(cgrp, cft, name),
-+					     kn);
-+		if (IS_ERR(kn_link))
-+			return PTR_ERR(kn_link);
-+	}
-+
- 	return 0;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/303-core-0004-cgroup-bfq-revert-bfq.weight-symlink-change.patch b/target/linux/layerscape/patches-5.4/303-core-0004-cgroup-bfq-revert-bfq.weight-symlink-change.patch
deleted file mode 100644
index 469bbfdffa..0000000000
--- a/target/linux/layerscape/patches-5.4/303-core-0004-cgroup-bfq-revert-bfq.weight-symlink-change.patch
+++ /dev/null
@@ -1,114 +0,0 @@
-From b7f71899fbdba1cac6773a62ed4ea841b7eda6b0 Mon Sep 17 00:00:00 2001
-From: Jens Axboe <axboe@kernel.dk>
-Date: Mon, 10 Jun 2019 03:35:41 -0600
-Subject: [PATCH] cgroup/bfq: revert bfq.weight symlink change
-
-There's some discussion on how to do this the best, and Tejun prefers
-that BFQ just create the file itself instead of having cgroups support
-a symlink feature.
-
-Hence revert commit 54b7b868e826 and 19e9da9e86c4 for 5.2, and this
-can be done properly for 5.3.
-
-Signed-off-by: Jens Axboe <axboe@kernel.dk>
-(cherry picked from commit cf8929885de318c0bf73438c9e5dde59d6536f7c)
-Signed-off-by: Li Yang <leoyang.li@nxp.com>
----
- include/linux/cgroup-defs.h |  3 ---
- kernel/cgroup/cgroup.c      | 33 ++++-----------------------------
- 2 files changed, 4 insertions(+), 32 deletions(-)
-
---- a/include/linux/cgroup-defs.h
-+++ b/include/linux/cgroup-defs.h
-@@ -106,8 +106,6 @@ enum {
- 	CFTYPE_WORLD_WRITABLE	= (1 << 4),	/* (DON'T USE FOR NEW FILES) S_IWUGO */
- 	CFTYPE_DEBUG		= (1 << 5),	/* create when cgroup_debug */
- 
--	CFTYPE_SYMLINKED	= (1 << 6),	/* pointed to by symlink too */
--
- 	/* internal flags, do not use outside cgroup core proper */
- 	__CFTYPE_ONLY_ON_DFL	= (1 << 16),	/* only on default hierarchy */
- 	__CFTYPE_NOT_ON_DFL	= (1 << 17),	/* not on default hierarchy */
-@@ -546,7 +544,6 @@ struct cftype {
- 	 * end of cftype array.
- 	 */
- 	char name[MAX_CFTYPE_NAME];
--	char link_name[MAX_CFTYPE_NAME];
- 	unsigned long private;
- 
- 	/*
---- a/kernel/cgroup/cgroup.c
-+++ b/kernel/cgroup/cgroup.c
-@@ -1465,8 +1465,8 @@ struct cgroup *task_cgroup_from_root(str
- 
- static struct kernfs_syscall_ops cgroup_kf_syscall_ops;
- 
--static char *cgroup_fill_name(struct cgroup *cgrp, const struct cftype *cft,
--			      char *buf, bool write_link_name)
-+static char *cgroup_file_name(struct cgroup *cgrp, const struct cftype *cft,
-+			      char *buf)
- {
- 	struct cgroup_subsys *ss = cft->ss;
- 
-@@ -1476,26 +1476,13 @@ static char *cgroup_fill_name(struct cgr
- 
- 		snprintf(buf, CGROUP_FILE_NAME_MAX, "%s%s.%s",
- 			 dbg, cgroup_on_dfl(cgrp) ? ss->name : ss->legacy_name,
--			 write_link_name ? cft->link_name : cft->name);
-+			 cft->name);
- 	} else {
--		strscpy(buf, write_link_name ? cft->link_name : cft->name,
--			CGROUP_FILE_NAME_MAX);
-+		strscpy(buf, cft->name, CGROUP_FILE_NAME_MAX);
- 	}
- 	return buf;
- }
- 
--static char *cgroup_file_name(struct cgroup *cgrp, const struct cftype *cft,
--			      char *buf)
--{
--	return cgroup_fill_name(cgrp, cft, buf, false);
--}
--
--static char *cgroup_link_name(struct cgroup *cgrp, const struct cftype *cft,
--			      char *buf)
--{
--	return cgroup_fill_name(cgrp, cft, buf, true);
--}
--
- /**
-  * cgroup_file_mode - deduce file mode of a control file
-  * @cft: the control file in question
-@@ -1654,9 +1641,6 @@ static void cgroup_rm_file(struct cgroup
- 	}
- 
- 	kernfs_remove_by_name(cgrp->kn, cgroup_file_name(cgrp, cft, name));
--	if (cft->flags & CFTYPE_SYMLINKED)
--		kernfs_remove_by_name(cgrp->kn,
--				      cgroup_link_name(cgrp, cft, name));
- }
- 
- /**
-@@ -3912,7 +3896,6 @@ static int cgroup_add_file(struct cgroup
- {
- 	char name[CGROUP_FILE_NAME_MAX];
- 	struct kernfs_node *kn;
--	struct kernfs_node *kn_link;
- 	struct lock_class_key *key = NULL;
- 	int ret;
- 
-@@ -3943,14 +3926,6 @@ static int cgroup_add_file(struct cgroup
- 		spin_unlock_irq(&cgroup_file_kn_lock);
- 	}
- 
--	if (cft->flags & CFTYPE_SYMLINKED) {
--		kn_link = kernfs_create_link(cgrp->kn,
--					     cgroup_link_name(cgrp, cft, name),
--					     kn);
--		if (IS_ERR(kn_link))
--			return PTR_ERR(kn_link);
--	}
--
- 	return 0;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/303-core-0005-nand-raw-workaround-for-EDO-high-speed-mode.patch b/target/linux/layerscape/patches-5.4/303-core-0005-nand-raw-workaround-for-EDO-high-speed-mode.patch
deleted file mode 100644
index b2a845683e..0000000000
--- a/target/linux/layerscape/patches-5.4/303-core-0005-nand-raw-workaround-for-EDO-high-speed-mode.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From e2c1ef18cddb426b9eea79599aec892717bead48 Mon Sep 17 00:00:00 2001
-From: Han Xu <han.xu@nxp.com>
-Date: Thu, 15 Aug 2019 21:45:50 -0500
-Subject: [PATCH] nand: raw: workaround for EDO high speed mode
-
-Found issue for EDO high speed mode, set to low speed mode as a
-workaround.
-
-Signed-off-by: Han Xu <han.xu@nxp.com>
----
- drivers/mtd/nand/raw/nand_base.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/nand/raw/nand_base.c
-+++ b/drivers/mtd/nand/raw/nand_base.c
-@@ -940,7 +940,8 @@ static int nand_init_data_interface(stru
- 		modes = GENMASK(chip->onfi_timing_mode_default, 0);
- 	}
- 
--	for (mode = fls(modes) - 1; mode >= 0; mode--) {
-+	/* for (mode = fls(modes) - 1; mode >= 0; mode--) { */
-+	for (mode = 1; mode >= 0; mode--) {
- 		ret = onfi_fill_data_interface(chip, NAND_SDR_IFACE, mode);
- 		if (ret)
- 			continue;
diff --git a/target/linux/layerscape/patches-5.4/303-core-0006-mm-Re-export-ioremap_page_range.patch b/target/linux/layerscape/patches-5.4/303-core-0006-mm-Re-export-ioremap_page_range.patch
deleted file mode 100644
index 82e75a4c4b..0000000000
--- a/target/linux/layerscape/patches-5.4/303-core-0006-mm-Re-export-ioremap_page_range.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From ca952acd72964dca53a9f50cf728dd1d31d48117 Mon Sep 17 00:00:00 2001
-From: Jan Kiszka <jan.kiszka@siemens.com>
-Date: Tue, 7 Feb 2017 17:52:00 +0100
-Subject: [PATCH] mm: Re-export ioremap_page_range
-
-We need this in Jailhouse to map at specific virtual addresses, at
-least for the moment.
-
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit 94bb285491a9a9e15c82c0761505b1073d6b7a47)
----
- lib/ioremap.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/lib/ioremap.c
-+++ b/lib/ioremap.c
-@@ -231,3 +231,4 @@ int ioremap_page_range(unsigned long add
- 
- 	return err;
- }
-+EXPORT_SYMBOL_GPL(ioremap_page_range);
diff --git a/target/linux/layerscape/patches-5.4/303-core-0007-of-of_reserved_mem-Ensure-cma-reserved-region-not-cr.patch b/target/linux/layerscape/patches-5.4/303-core-0007-of-of_reserved_mem-Ensure-cma-reserved-region-not-cr.patch
deleted file mode 100644
index d95d1f0d53..0000000000
--- a/target/linux/layerscape/patches-5.4/303-core-0007-of-of_reserved_mem-Ensure-cma-reserved-region-not-cr.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 6973ab95b9e0b0ce7b878c70c301bc5b3d11eca4 Mon Sep 17 00:00:00 2001
-From: Jason Liu <jason.hui.liu@nxp.com>
-Date: Mon, 11 Nov 2019 17:51:13 +0800
-Subject: [PATCH] of: of_reserved_mem: Ensure cma reserved region not cross the
- low/high memory
-
-Need ensure the cma reserved region not cross the low/high memory boundary
-when using the dynamic allocation methond through device-tree, otherwise,
-kernel will fail to boot up when cma reserved region cross how/high mem.
-
-Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
-Cc: Laura Abbott <labbott@redhat.com>
-Cc: Frank Rowand <frowand.list@gmail.com>
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: stable@vger.kernel.org
-Signed-off-by: Arulpandiyan Vadivel <arulpandiyan_vadivel@mentor.com>
----
- drivers/of/of_reserved_mem.c | 33 ++++++++++++++++++++++++++-------
- 1 file changed, 26 insertions(+), 7 deletions(-)
-
---- a/drivers/of/of_reserved_mem.c
-+++ b/drivers/of/of_reserved_mem.c
-@@ -26,11 +26,12 @@
- static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS];
- static int reserved_mem_count;
- 
--static int __init early_init_dt_alloc_reserved_memory_arch(phys_addr_t size,
--	phys_addr_t align, phys_addr_t start, phys_addr_t end, bool nomap,
--	phys_addr_t *res_base)
-+static int __init early_init_dt_alloc_reserved_memory_arch(unsigned long node,
-+	phys_addr_t size, phys_addr_t align, phys_addr_t start,
-+	phys_addr_t end, bool nomap, phys_addr_t *res_base)
- {
- 	phys_addr_t base;
-+	phys_addr_t highmem_start = __pa(high_memory - 1) + 1;
- 
- 	end = !end ? MEMBLOCK_ALLOC_ANYWHERE : end;
- 	align = !align ? SMP_CACHE_BYTES : align;
-@@ -38,6 +39,24 @@ static int __init early_init_dt_alloc_re
- 	if (!base)
- 		return -ENOMEM;
- 
-+
-+	/*
-+	 * Sanity check for the cma reserved region:If the reserved region
-+	 * crosses the low/high memory boundary, try to fix it up and then
-+	 * fall back to allocate the cma region from the low mememory space.
-+	 */
-+
-+	if (IS_ENABLED(CONFIG_CMA)
-+	    && of_flat_dt_is_compatible(node, "shared-dma-pool")
-+	    && of_get_flat_dt_prop(node, "reusable", NULL) && !nomap) {
-+		if (base < highmem_start && (base + size) > highmem_start) {
-+			base = memblock_find_in_range(start, highmem_start,
-+						      size, align);
-+			if (!base)
-+				return -ENOMEM;
-+		}
-+	}
-+
- 	*res_base = base;
- 	if (nomap)
- 		return memblock_remove(base, size);
-@@ -131,8 +150,8 @@ static int __init __reserved_mem_alloc_s
- 			end = start + dt_mem_next_cell(dt_root_size_cells,
- 						       &prop);
- 
--			ret = early_init_dt_alloc_reserved_memory_arch(size,
--					align, start, end, nomap, &base);
-+			ret = early_init_dt_alloc_reserved_memory_arch(node,
-+					size, align, start, end, nomap, &base);
- 			if (ret == 0) {
- 				pr_debug("allocated memory for '%s' node: base %pa, size %lu MiB\n",
- 					uname, &base,
-@@ -143,8 +162,8 @@ static int __init __reserved_mem_alloc_s
- 		}
- 
- 	} else {
--		ret = early_init_dt_alloc_reserved_memory_arch(size, align,
--							0, 0, nomap, &base);
-+		ret = early_init_dt_alloc_reserved_memory_arch(node,
-+					size, align, 0, 0, nomap, &base);
- 		if (ret == 0)
- 			pr_debug("allocated memory for '%s' node: base %pa, size %lu MiB\n",
- 				uname, &base, (unsigned long)(size / SZ_1M));
diff --git a/target/linux/layerscape/patches-5.4/303-core-0008-ENGR00279980-ubi-attach-do-not-return-EINVAL-if-the-.patch b/target/linux/layerscape/patches-5.4/303-core-0008-ENGR00279980-ubi-attach-do-not-return-EINVAL-if-the-.patch
deleted file mode 100644
index c67cdb0f82..0000000000
--- a/target/linux/layerscape/patches-5.4/303-core-0008-ENGR00279980-ubi-attach-do-not-return-EINVAL-if-the-.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 17e6b7bb84649ffcbec11b3e3e933294d8856462 Mon Sep 17 00:00:00 2001
-From: Huang Shijie <b32955@freescale.com>
-Date: Wed, 18 Sep 2013 10:17:39 +0800
-Subject: [PATCH] ENGR00279980 ubi: attach: do not return -EINVAL if the
- mtd->numeraseregions is 1
-
-If the master mtd does not have any slave mtd partitions,
-and its numeraseregions is one(only has one erease block), and
-we attach the master mtd with : ubiattach -m 0 -d 0
-
-We will meet the error:
--------------------------------------------------------
-root@freescale ~$ ubiattach /dev/ubi_ctrl -m 0 -d 0
-UBI: attaching mtd0 to ubi0
-UBI error: io_init: multiple regions, not implemented
-ubiattach: error!: cannot attach mtd0
-           error 22 (Invalid argument)
--------------------------------------------------------
-
-In fact, if there is only one "erase block", we should not
-prevent the attach.
-
-This patch fixes it.
-
-Signed-off-by: Huang Shijie <b32955@freescale.com>
-(cherry picked from commit 361cdc47fc4c4db31c5485560cdabd94f409bd81)
-(cherry picked from commit ebee7d74914fad3cf7223af84496811c9d2488a1)
-
-Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
-
-Signed-off-by: Han Xu <han.xu@nxp.com>
----
- drivers/mtd/ubi/build.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/ubi/build.c
-+++ b/drivers/mtd/ubi/build.c
-@@ -576,7 +576,7 @@ static int io_init(struct ubi_device *ub
- 	dbg_gen("sizeof(struct ubi_ainf_peb) %zu", sizeof(struct ubi_ainf_peb));
- 	dbg_gen("sizeof(struct ubi_wl_entry) %zu", sizeof(struct ubi_wl_entry));
- 
--	if (ubi->mtd->numeraseregions != 0) {
-+	if (ubi->mtd->numeraseregions > 1) {
- 		/*
- 		 * Some flashes have several erase regions. Different regions
- 		 * may have different eraseblock size and other
diff --git a/target/linux/layerscape/patches-5.4/303-core-0009-arm64-move-elfcorehdr-reservation-early-for-crash-du.patch b/target/linux/layerscape/patches-5.4/303-core-0009-arm64-move-elfcorehdr-reservation-early-for-crash-du.patch
deleted file mode 100644
index d7149712ad..0000000000
--- a/target/linux/layerscape/patches-5.4/303-core-0009-arm64-move-elfcorehdr-reservation-early-for-crash-du.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 67349176ca23f7525dee79665a880cde5aeeaf26 Mon Sep 17 00:00:00 2001
-From: Nikhil Gupta <nikhil.gupta@nxp.com>
-Date: Mon, 30 Dec 2019 15:11:23 +0530
-Subject: [PATCH] arm64:move elfcorehdr reservation early for crash dump kernel
-
-on some SOCs, elfcorehdr address may overlap with the address of reserved
-memory allocated using early_init_fdt_scan_reserved_mem
-
-Signed-off-by: Nikhil Gupta <nikhil.gupta@nxp.com>
-Signed-off-by: Poonam Aggrwal <poonam.aggrwal@nxp.com>
----
- arch/arm64/mm/init.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/mm/init.c
-+++ b/arch/arm64/mm/init.c
-@@ -418,6 +418,8 @@ void __init arm64_memblock_init(void)
- 		initrd_end = initrd_start + phys_initrd_size;
- 	}
- 
-+	reserve_elfcorehdr();
-+
- 	early_init_fdt_scan_reserved_mem();
- 
- 	/* 4GB maximum for 32-bit only capable devices */
-@@ -428,8 +430,6 @@ void __init arm64_memblock_init(void)
- 
- 	reserve_crashkernel();
- 
--	reserve_elfcorehdr();
--
- 	high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
- 
- 	dma_contiguous_reserve(arm64_dma_phys_limit);
diff --git a/target/linux/layerscape/patches-5.4/303-core-0010-scripts-Makefile-Enable-creation-of-_symbols_-DT-nod.patch b/target/linux/layerscape/patches-5.4/303-core-0010-scripts-Makefile-Enable-creation-of-_symbols_-DT-nod.patch
deleted file mode 100644
index 801bde12fc..0000000000
--- a/target/linux/layerscape/patches-5.4/303-core-0010-scripts-Makefile-Enable-creation-of-_symbols_-DT-nod.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 71650b18b78f52e96512a7695a0d39762c1ee408 Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Mon, 6 Jan 2020 16:35:08 +0200
-Subject: [PATCH] scripts: Makefile: Enable creation of _symbols_ DT node for
- overlays
-
-DT compiler supports -@ flag which indicates that _symbols_ node should be
-automatically created during compilation.  This node is required for
-using DT overlays.  The generated DTB is backward compatible, the _symbols_
-node can be safely ignored if overlays are not used.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- scripts/Makefile.lib | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -255,6 +255,9 @@ endif
- 
- DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
- 
-+# Enable creation of _symbols_ node for DT overlays
-+DTC_FLAGS += -@
-+
- # Generate an assembly file to wrap the output of the device tree compiler
- quiet_cmd_dt_S_dtb= DTB     $@
- cmd_dt_S_dtb=						\
diff --git a/target/linux/layerscape/patches-5.4/303-core-0011-LF-419-arm64-crash_core-Export-TCR_EL1.T1SZ-in-vmcor.patch b/target/linux/layerscape/patches-5.4/303-core-0011-LF-419-arm64-crash_core-Export-TCR_EL1.T1SZ-in-vmcor.patch
deleted file mode 100644
index 7bd8df661c..0000000000
--- a/target/linux/layerscape/patches-5.4/303-core-0011-LF-419-arm64-crash_core-Export-TCR_EL1.T1SZ-in-vmcor.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 2e4c0c429526d88b96319d7bb08c51bfa70f6e27 Mon Sep 17 00:00:00 2001
-From: Bhupesh Sharma <bhsharma@redhat.com>
-Date: Fri, 29 Nov 2019 01:55:13 +0530
-Subject: [PATCH] LF-419 arm64/crash_core: Export TCR_EL1.T1SZ in vmcoreinfo
-
-vabits_actual variable on arm64 indicates the actual VA space size,
-and allows a single binary to support both 48-bit and 52-bit VA
-spaces.
-
-If the ARMv8.2-LVA optional feature is present, and we are running
-with a 64KB page size; then it is possible to use 52-bits of address
-space for both userspace and kernel addresses. However, any kernel
-binary that supports 52-bit must also be able to fall back to 48-bit
-at early boot time if the hardware feature is not present.
-
-Since TCR_EL1.T1SZ indicates the size offset of the memory region
-addressed by TTBR1_EL1 (and hence can be used for determining the
-vabits_actual value) it makes more sense to export the same in
-vmcoreinfo rather than vabits_actual variable, as the name of the
-variable can change in future kernel versions, but the architectural
-constructs like TCR_EL1.T1SZ can be used better to indicate intended
-specific fields to user-space.
-
-User-space utilities like makedumpfile and crash-utility, need to
-read/write this value from/to vmcoreinfo for determining if a virtual
-address lies in the linear map range.
-
-The user-space computation for determining whether an address lies in
-the linear map range is the same as we have in kernel-space:
-
-  #define __is_lm_address(addr)	(!(((u64)addr) & BIT(vabits_actual - 1)))
-
-I have sent out user-space patches for makedumpfile and crash-utility
-to add features for obtaining vabits_actual value from TCR_EL1.T1SZ (see
-[0] and [1]).
-
-Akashi reported that he was able to use this patchset and the user-space
-changes to get user-space working fine with the 52-bit kernel VA
-changes (see [2]).
-
-[0]. http://lists.infradead.org/pipermail/kexec/2019-November/023966.html
-[1]. http://lists.infradead.org/pipermail/kexec/2019-November/024006.html
-[2]. http://lists.infradead.org/pipermail/kexec/2019-November/023992.html
-
-Cc: James Morse <james.morse@arm.com>
-Cc: Mark Rutland <mark.rutland@arm.com>
-Cc: Will Deacon <will@kernel.org>
-Cc: Steve Capper <steve.capper@arm.com>
-Cc: Catalin Marinas <catalin.marinas@arm.com>
-Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
-Cc: Dave Anderson <anderson@redhat.com>
-Cc: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: linux-kernel@vger.kernel.org
-Cc: kexec@lists.infradead.org
-Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
-Tested-by: Poonam Aggrwal <poonam.aggrwal@nxp.com>
-Acked-by: Li Yang <leoyang.li@nxp.com>
----
- arch/arm64/include/asm/pgtable-hwdef.h | 1 +
- arch/arm64/kernel/crash_core.c         | 9 +++++++++
- 2 files changed, 10 insertions(+)
-
---- a/arch/arm64/include/asm/pgtable-hwdef.h
-+++ b/arch/arm64/include/asm/pgtable-hwdef.h
-@@ -215,6 +215,7 @@
- #define TCR_TxSZ(x)		(TCR_T0SZ(x) | TCR_T1SZ(x))
- #define TCR_TxSZ_WIDTH		6
- #define TCR_T0SZ_MASK		(((UL(1) << TCR_TxSZ_WIDTH) - 1) << TCR_T0SZ_OFFSET)
-+#define TCR_T1SZ_MASK		(((UL(1) << TCR_TxSZ_WIDTH) - 1) << TCR_T1SZ_OFFSET)
- 
- #define TCR_EPD0_SHIFT		7
- #define TCR_EPD0_MASK		(UL(1) << TCR_EPD0_SHIFT)
---- a/arch/arm64/kernel/crash_core.c
-+++ b/arch/arm64/kernel/crash_core.c
-@@ -7,6 +7,13 @@
- #include <linux/crash_core.h>
- #include <asm/memory.h>
- 
-+static inline u64 get_tcr_el1_t1sz(void);
-+
-+static inline u64 get_tcr_el1_t1sz(void)
-+{
-+	return (read_sysreg(tcr_el1) & TCR_T1SZ_MASK) >> TCR_T1SZ_OFFSET;
-+}
-+
- void arch_crash_save_vmcoreinfo(void)
- {
- 	VMCOREINFO_NUMBER(VA_BITS);
-@@ -15,5 +22,7 @@ void arch_crash_save_vmcoreinfo(void)
- 						kimage_voffset);
- 	vmcoreinfo_append_str("NUMBER(PHYS_OFFSET)=0x%llx\n",
- 						PHYS_OFFSET);
-+	vmcoreinfo_append_str("NUMBER(tcr_el1_t1sz)=0x%llx\n",
-+						get_tcr_el1_t1sz());
- 	vmcoreinfo_append_str("KERNELOFFSET=%lx\n", kaslr_offset());
- }
diff --git a/target/linux/layerscape/patches-5.4/303-core-0012-LF-789-1-Revert-scripts-Makefile-Enable-creation-of-.patch b/target/linux/layerscape/patches-5.4/303-core-0012-LF-789-1-Revert-scripts-Makefile-Enable-creation-of-.patch
deleted file mode 100644
index 744930c726..0000000000
--- a/target/linux/layerscape/patches-5.4/303-core-0012-LF-789-1-Revert-scripts-Makefile-Enable-creation-of-.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From b13487a97b51a619b4e681a6091a1da9d6733058 Mon Sep 17 00:00:00 2001
-From: Jason Liu <jason.hui.liu@nxp.com>
-Date: Fri, 10 Jan 2020 11:38:05 +0800
-Subject: [PATCH] LF-789-1 Revert "scripts: Makefile: Enable creation of
- _symbols_ DT node for overlays"
-
-This reverts commit 432071b7a106060fa4e451e10249cef021af0b7c.
-
-commit: 432071b7a106 scripts: Makefile: Enable creation of _symbols_ DT node for overlays
-changes the common Makefile and force creation of __symbols__ node on all platforms.
-
-This is not good and not acceptible under some cases due to this change will increase
-the final DTB size a lot and bring big impact for others who does not need creation
-of _symbols_ DT node for overlays.For example, on i.MX OP-TEE, the maxsize of DT is 1MB,
-this patch will break some of the i.MX6/i.MX7 boards to boot with OP-TEE enabled.
-
-BTW, community has the similar patch but rejected. The following post discuss about this:
-https://lore.kernel.org/patchwork/patch/821645/
-
-For specifc plaform/board which need the creation of _symbols_ DT node for overlays, user can
-define DTC_FLAGS_target either trough dtc build command line(#1) or with board specific Makefile(#2)
-
-For example:#1
-
-make DTC_FLAGS_fsl-ls1028a-qds=-@ freescale/fsl-ls1028a-qds.dtb
-
-For example:#2
-
-In arch/arm64/boot/dts/freescale/Makefile,
-
- @@ -1,4 +1,7 @@
-  # SPDX-License-Identifier: GPL-2.0
- +# required for overlay support
- +#DTC_FLAGS_fsl-ls1028a-qds := -@
- +
-
-Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
-Reviewed-by: Alex Marginean <alexandru.marginean@nxp.com>
-Tested-by: Alex Marginean <alexandru.marginean@nxp.com>
-[fix commit message]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- scripts/Makefile.lib | 3 ---
- 1 file changed, 3 deletions(-)
-
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -255,9 +255,6 @@ endif
- 
- DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
- 
--# Enable creation of _symbols_ node for DT overlays
--DTC_FLAGS += -@
--
- # Generate an assembly file to wrap the output of the device tree compiler
- quiet_cmd_dt_S_dtb= DTB     $@
- cmd_dt_S_dtb=						\
diff --git a/target/linux/layerscape/patches-5.4/701-net-0001-soc-fsl-qman-fixup-liodns-only-on-ppc-targets.patch b/target/linux/layerscape/patches-5.4/701-net-0001-soc-fsl-qman-fixup-liodns-only-on-ppc-targets.patch
deleted file mode 100644
index 0ac4bee2b1..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0001-soc-fsl-qman-fixup-liodns-only-on-ppc-targets.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From cc0d30fc5931e76e83f5cd1f5c91a9b97abf39b9 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 6 Feb 2018 15:55:56 +0200
-Subject: [PATCH] soc/fsl/qman: fixup liodns only on ppc targets
-
-ARM SoCs use SMMU so the liodn fixup done in the qman driver is no
-longer making sense and it also breaks the ICID settings inherited
-from u-boot. Do the fixups only for PPC targets.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- drivers/soc/fsl/qbman/qman_ccsr.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/soc/fsl/qbman/qman_ccsr.c
-+++ b/drivers/soc/fsl/qbman/qman_ccsr.c
-@@ -642,6 +642,7 @@ static int qman_init_ccsr(struct device
- #define LIO_CFG_LIODN_MASK 0x0fff0000
- void __qman_liodn_fixup(u16 channel)
- {
-+#ifdef CONFIG_PPC
- 	static int done;
- 	static u32 liodn_offset;
- 	u32 before, after;
-@@ -661,6 +662,7 @@ void __qman_liodn_fixup(u16 channel)
- 		qm_ccsr_out(REG_REV3_QCSP_LIO_CFG(idx), after);
- 	else
- 		qm_ccsr_out(REG_QCSP_LIO_CFG(idx), after);
-+#endif
- }
- 
- #define IO_CFG_SDEST_MASK 0x00ff0000
diff --git a/target/linux/layerscape/patches-5.4/701-net-0002-soc-fsl-bman-map-FBPR-area-in-the-iommu.patch b/target/linux/layerscape/patches-5.4/701-net-0002-soc-fsl-bman-map-FBPR-area-in-the-iommu.patch
deleted file mode 100644
index afafe928e4..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0002-soc-fsl-bman-map-FBPR-area-in-the-iommu.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 55705ace9136e1c24d92d7ab23e513439eb766e7 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 3 Apr 2018 17:55:00 +0300
-Subject: [PATCH] soc/fsl/bman: map FBPR area in the iommu
-
-Add a one-to-one iommu mapping for bman private data memory (FBPR).
-This is required for BMAN to work without faults behind an iommu.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- drivers/soc/fsl/qbman/bman_ccsr.c | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/drivers/soc/fsl/qbman/bman_ccsr.c
-+++ b/drivers/soc/fsl/qbman/bman_ccsr.c
-@@ -29,6 +29,7 @@
-  */
- 
- #include "bman_priv.h"
-+#include <linux/iommu.h>
- 
- u16 bman_ip_rev;
- EXPORT_SYMBOL(bman_ip_rev);
-@@ -210,6 +211,7 @@ static int fsl_bman_probe(struct platfor
- 	int ret, err_irq;
- 	struct device *dev = &pdev->dev;
- 	struct device_node *node = dev->of_node;
-+	struct iommu_domain *domain;
- 	struct resource *res;
- 	u16 id, bm_pool_cnt;
- 	u8 major, minor;
-@@ -257,6 +259,15 @@ static int fsl_bman_probe(struct platfor
- 
- 	dev_dbg(dev, "Allocated FBPR 0x%llx 0x%zx\n", fbpr_a, fbpr_sz);
- 
-+	/* Create an 1-to-1 iommu mapping for FBPR area */
-+	domain = iommu_get_domain_for_dev(dev);
-+	if (domain) {
-+		ret = iommu_map(domain, fbpr_a, fbpr_a, fbpr_sz,
-+				IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE);
-+		if (ret)
-+			dev_warn(dev, "failed to iommu_map() %d\n", ret);
-+	}
-+
- 	bm_set_memory(fbpr_a, fbpr_sz);
- 
- 	err_irq = platform_get_irq(pdev, 0);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0003-soc-fsl-qman-map-FQD-and-PFDR-areas-in-the-iommu.patch b/target/linux/layerscape/patches-5.4/701-net-0003-soc-fsl-qman-map-FQD-and-PFDR-areas-in-the-iommu.patch
deleted file mode 100644
index 03b8c22465..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0003-soc-fsl-qman-map-FQD-and-PFDR-areas-in-the-iommu.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 02638b2627104cd02aff7484bb250d029e05dc5f Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 3 Apr 2018 18:08:48 +0300
-Subject: [PATCH] soc/fsl/qman: map FQD and PFDR areas in the iommu
-
-Add a one-to-one iommu mapping for qman private data memory areas
-(FQD and PFDR). This is required for QMAN to work without faults
-behind an iommu.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- drivers/soc/fsl/qbman/qman_ccsr.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/drivers/soc/fsl/qbman/qman_ccsr.c
-+++ b/drivers/soc/fsl/qbman/qman_ccsr.c
-@@ -29,6 +29,7 @@
-  */
- 
- #include "qman_priv.h"
-+#include <linux/iommu.h>
- 
- u16 qman_ip_rev;
- EXPORT_SYMBOL(qman_ip_rev);
-@@ -755,6 +756,7 @@ static int fsl_qman_probe(struct platfor
- {
- 	struct device *dev = &pdev->dev;
- 	struct device_node *node = dev->of_node;
-+	struct iommu_domain *domain;
- 	struct resource *res;
- 	int ret, err_irq;
- 	u16 id;
-@@ -834,6 +836,19 @@ static int fsl_qman_probe(struct platfor
- 	}
- 	dev_dbg(dev, "Allocated PFDR 0x%llx 0x%zx\n", pfdr_a, pfdr_sz);
- 
-+	/* Create an 1-to-1 iommu mapping for fqd and pfdr areas */
-+	domain = iommu_get_domain_for_dev(dev);
-+	if (domain) {
-+		ret = iommu_map(domain, fqd_a, fqd_a, fqd_sz,
-+				IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE);
-+		if (ret)
-+			dev_warn(dev, "iommu_map(fqd) failed %d\n", ret);
-+		ret = iommu_map(domain, pfdr_a, pfdr_a, pfdr_sz,
-+				IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE);
-+		if (ret)
-+			dev_warn(dev, "iommu_map(pfdr) failed %d\n", ret);
-+	}
-+
- 	ret = qman_init_ccsr(dev);
- 	if (ret) {
- 		dev_err(dev, "CCSR setup failed\n");
diff --git a/target/linux/layerscape/patches-5.4/701-net-0004-soc-fsl-qman-portal-map-CENA-area-in-the-iommu.patch b/target/linux/layerscape/patches-5.4/701-net-0004-soc-fsl-qman-portal-map-CENA-area-in-the-iommu.patch
deleted file mode 100644
index b29964204d..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0004-soc-fsl-qman-portal-map-CENA-area-in-the-iommu.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 488b62aa444440690708e5ea823bb0d54c296c4f Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 3 Apr 2018 18:18:30 +0300
-Subject: [PATCH] soc/fsl/qman-portal: map CENA area in the iommu
-
-Add a one-to-one iommu mapping for qman portal CENA register area.
-This is required for QMAN stashing to work without faults behind
-an iommu.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- drivers/soc/fsl/qbman/qman_portal.c | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/drivers/soc/fsl/qbman/qman_portal.c
-+++ b/drivers/soc/fsl/qbman/qman_portal.c
-@@ -29,6 +29,7 @@
-  */
- 
- #include "qman_priv.h"
-+#include <linux/iommu.h>
- 
- struct qman_portal *qman_dma_portal;
- EXPORT_SYMBOL(qman_dma_portal);
-@@ -231,6 +232,7 @@ static int qman_portal_probe(struct plat
- {
- 	struct device *dev = &pdev->dev;
- 	struct device_node *node = dev->of_node;
-+	struct iommu_domain *domain;
- 	struct qm_portal_config *pcfg;
- 	struct resource *addr_phys[2];
- 	int irq, cpu, err, i;
-@@ -294,6 +296,21 @@ static int qman_portal_probe(struct plat
- 		goto err_ioremap2;
- 	}
- 
-+	/* Create an 1-to-1 iommu mapping for cena portal area */
-+	domain = iommu_get_domain_for_dev(dev);
-+	if (domain) {
-+		/*
-+		 * Note: not mapping this as cacheable triggers the infamous
-+		 * QMan CIDE error.
-+		 */
-+		err = iommu_map(domain,
-+				addr_phys[0]->start, addr_phys[0]->start,
-+				resource_size(addr_phys[0]),
-+				IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE);
-+		if (err)
-+			dev_warn(dev, "failed to iommu_map() %d\n", err);
-+	}
-+
- 	pcfg->pools = qm_get_pools_sdqcr();
- 
- 	spin_lock(&qman_lock);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0005-soc-fsl-qbman_portals-add-APIs-to-retrieve-the-probi.patch b/target/linux/layerscape/patches-5.4/701-net-0005-soc-fsl-qbman_portals-add-APIs-to-retrieve-the-probi.patch
deleted file mode 100644
index a137e55e96..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0005-soc-fsl-qbman_portals-add-APIs-to-retrieve-the-probi.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From d43acc10c25f01a461a1cb1c1fd0cc72cd29dd42 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Thu, 2 Aug 2018 16:14:12 +0300
-Subject: [PATCH] soc/fsl/qbman_portals: add APIs to retrieve the probing
- status
-
-Add a couple of new APIs to check the probing status of the required
-cpu bound qman and bman portals:
- 'int bman_portals_probed()' and 'int qman_portals_probed()'.
-They return the following values.
- *  1 if qman/bman portals were all probed correctly
- *  0 if qman/bman portals were not yet probed
- * -1 if probing of qman/bman portals failed
-Portals are considered successful probed if no error occurred during
-the probing of any of the portals and if enough portals were probed
-to have one available for each cpu.
-The error handling paths were slightly rearranged in order to fit this
-new functionality without being too intrusive.
-Drivers that use qman/bman portal driver services are required to use
-these APIs before calling any functions exported by these drivers or
-otherwise they will crash the kernel.
-First user will be the dpaa1 ethernet driver, coming in a subsequent
-patch.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- drivers/soc/fsl/qbman/bman_portal.c | 3 +++
- drivers/soc/fsl/qbman/qman_portal.c | 3 +++
- include/soc/fsl/qman.h              | 9 +++++++++
- 3 files changed, 15 insertions(+)
-
---- a/drivers/soc/fsl/qbman/bman_portal.c
-+++ b/drivers/soc/fsl/qbman/bman_portal.c
-@@ -164,6 +164,9 @@ static int bman_portal_probe(struct plat
- 	}
- 
- 	cpumask_set_cpu(cpu, &portal_cpus);
-+	if (!__bman_portals_probed &&
-+	    cpumask_weight(&portal_cpus) == num_online_cpus())
-+		__bman_portals_probed = 1;
- 	spin_unlock(&bman_lock);
- 	pcfg->cpu = cpu;
- 
---- a/drivers/soc/fsl/qbman/qman_portal.c
-+++ b/drivers/soc/fsl/qbman/qman_portal.c
-@@ -323,6 +323,9 @@ static int qman_portal_probe(struct plat
- 	}
- 
- 	cpumask_set_cpu(cpu, &portal_cpus);
-+	if (!__qman_portals_probed &&
-+	    cpumask_weight(&portal_cpus) == num_online_cpus())
-+		__qman_portals_probed = 1;
- 	spin_unlock(&qman_lock);
- 	pcfg->cpu = cpu;
- 
---- a/include/soc/fsl/qman.h
-+++ b/include/soc/fsl/qman.h
-@@ -1235,4 +1235,13 @@ void qman_portal_get_iperiod(struct qman
-  */
- int qman_portal_set_iperiod(struct qman_portal *portal, u32 iperiod);
- 
-+/**
-+ * qman_portals_probed - Check if all cpu bound qman portals are probed
-+ *
-+ * Returns 1 if all the required cpu bound qman portals successfully probed,
-+ * -1 if probe errors appeared or 0 if the qman portals did not yet finished
-+ * probing.
-+ */
-+int qman_portals_probed(void);
-+
- #endif	/* __FSL_QMAN_H */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0006-soc-fsl-bqman-page-align-iommu-mapping-sizes.patch b/target/linux/layerscape/patches-5.4/701-net-0006-soc-fsl-bqman-page-align-iommu-mapping-sizes.patch
deleted file mode 100644
index 8e10ef1358..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0006-soc-fsl-bqman-page-align-iommu-mapping-sizes.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 218274ea02e908846fabb5b9a2ab7409da06a85f Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Thu, 22 Nov 2018 12:32:13 +0200
-Subject: [PATCH] soc/fsl/bqman: page align iommu mapping sizes
-
-Prior to calling iommu_map()/iommu_unmap() page align the size or
-failures such as below could happen:
-
-iommu: unaligned: iova 0x... pa 0x... size 0x4000 min_pagesz 0x10000
-qman_portal 500000000.qman-portal: failed to iommu_map() -22
-
-Seen when booted a kernel compiled with 64K page size support.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- drivers/soc/fsl/qbman/bman_ccsr.c   | 2 +-
- drivers/soc/fsl/qbman/qman_ccsr.c   | 4 ++--
- drivers/soc/fsl/qbman/qman_portal.c | 2 +-
- 3 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/soc/fsl/qbman/bman_ccsr.c
-+++ b/drivers/soc/fsl/qbman/bman_ccsr.c
-@@ -262,7 +262,7 @@ static int fsl_bman_probe(struct platfor
- 	/* Create an 1-to-1 iommu mapping for FBPR area */
- 	domain = iommu_get_domain_for_dev(dev);
- 	if (domain) {
--		ret = iommu_map(domain, fbpr_a, fbpr_a, fbpr_sz,
-+		ret = iommu_map(domain, fbpr_a, fbpr_a, PAGE_ALIGN(fbpr_sz),
- 				IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE);
- 		if (ret)
- 			dev_warn(dev, "failed to iommu_map() %d\n", ret);
---- a/drivers/soc/fsl/qbman/qman_ccsr.c
-+++ b/drivers/soc/fsl/qbman/qman_ccsr.c
-@@ -839,11 +839,11 @@ static int fsl_qman_probe(struct platfor
- 	/* Create an 1-to-1 iommu mapping for fqd and pfdr areas */
- 	domain = iommu_get_domain_for_dev(dev);
- 	if (domain) {
--		ret = iommu_map(domain, fqd_a, fqd_a, fqd_sz,
-+		ret = iommu_map(domain, fqd_a, fqd_a, PAGE_ALIGN(fqd_sz),
- 				IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE);
- 		if (ret)
- 			dev_warn(dev, "iommu_map(fqd) failed %d\n", ret);
--		ret = iommu_map(domain, pfdr_a, pfdr_a, pfdr_sz,
-+		ret = iommu_map(domain, pfdr_a, pfdr_a, PAGE_ALIGN(pfdr_sz),
- 				IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE);
- 		if (ret)
- 			dev_warn(dev, "iommu_map(pfdr) failed %d\n", ret);
---- a/drivers/soc/fsl/qbman/qman_portal.c
-+++ b/drivers/soc/fsl/qbman/qman_portal.c
-@@ -305,7 +305,7 @@ static int qman_portal_probe(struct plat
- 		 */
- 		err = iommu_map(domain,
- 				addr_phys[0]->start, addr_phys[0]->start,
--				resource_size(addr_phys[0]),
-+				PAGE_ALIGN(resource_size(addr_phys[0])),
- 				IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE);
- 		if (err)
- 			dev_warn(dev, "failed to iommu_map() %d\n", err);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0007-fsl_qbman-SDK-DPAA-1.x-QBMan-drivers.patch b/target/linux/layerscape/patches-5.4/701-net-0007-fsl_qbman-SDK-DPAA-1.x-QBMan-drivers.patch
deleted file mode 100644
index b9e7667065..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0007-fsl_qbman-SDK-DPAA-1.x-QBMan-drivers.patch
+++ /dev/null
@@ -1,24880 +0,0 @@
-From 772438d01bf57bc8939f53c3101a323fc774428f Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Wed, 10 May 2017 16:30:12 +0300
-Subject: [PATCH] fsl_qbman: SDK DPAA 1.x QBMan drivers
-
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/staging/fsl_qbman/Kconfig               |  228 +
- drivers/staging/fsl_qbman/Makefile              |   28 +
- drivers/staging/fsl_qbman/bman_config.c         |  720 +++
- drivers/staging/fsl_qbman/bman_debugfs.c        |  119 +
- drivers/staging/fsl_qbman/bman_driver.c         |  559 +++
- drivers/staging/fsl_qbman/bman_high.c           | 1145 +++++
- drivers/staging/fsl_qbman/bman_low.h            |  565 +++
- drivers/staging/fsl_qbman/bman_private.h        |  166 +
- drivers/staging/fsl_qbman/bman_test.c           |   56 +
- drivers/staging/fsl_qbman/bman_test.h           |   44 +
- drivers/staging/fsl_qbman/bman_test_high.c      |  183 +
- drivers/staging/fsl_qbman/bman_test_thresh.c    |  196 +
- drivers/staging/fsl_qbman/dpa_alloc.c           |  706 +++
- drivers/staging/fsl_qbman/dpa_sys.h             |  259 ++
- drivers/staging/fsl_qbman/dpa_sys_arm.h         |   95 +
- drivers/staging/fsl_qbman/dpa_sys_arm64.h       |  102 +
- drivers/staging/fsl_qbman/dpa_sys_ppc32.h       |   70 +
- drivers/staging/fsl_qbman/dpa_sys_ppc64.h       |   79 +
- drivers/staging/fsl_qbman/fsl_usdpaa.c          | 1984 ++++++++
- drivers/staging/fsl_qbman/fsl_usdpaa_irq.c      |  289 ++
- drivers/staging/fsl_qbman/qbman_driver.c        |   88 +
- drivers/staging/fsl_qbman/qman_config.c         | 1224 +++++
- drivers/staging/fsl_qbman/qman_debugfs.c        | 1594 +++++++
- drivers/staging/fsl_qbman/qman_driver.c         |  961 ++++
- drivers/staging/fsl_qbman/qman_high.c           | 5669 +++++++++++++++++++++++
- drivers/staging/fsl_qbman/qman_low.h            | 1427 ++++++
- drivers/staging/fsl_qbman/qman_private.h        |  398 ++
- drivers/staging/fsl_qbman/qman_test.c           |   57 +
- drivers/staging/fsl_qbman/qman_test.h           |   45 +
- drivers/staging/fsl_qbman/qman_test_high.c      |  216 +
- drivers/staging/fsl_qbman/qman_test_hotpotato.c |  502 ++
- drivers/staging/fsl_qbman/qman_utility.c        |  129 +
- include/linux/fsl_bman.h                        |  532 +++
- include/linux/fsl_qman.h                        | 3888 ++++++++++++++++
- include/linux/fsl_usdpaa.h                      |  372 ++
- 35 files changed, 24695 insertions(+)
- create mode 100644 drivers/staging/fsl_qbman/Kconfig
- create mode 100644 drivers/staging/fsl_qbman/Makefile
- create mode 100644 drivers/staging/fsl_qbman/bman_config.c
- create mode 100644 drivers/staging/fsl_qbman/bman_debugfs.c
- create mode 100644 drivers/staging/fsl_qbman/bman_driver.c
- create mode 100644 drivers/staging/fsl_qbman/bman_high.c
- create mode 100644 drivers/staging/fsl_qbman/bman_low.h
- create mode 100644 drivers/staging/fsl_qbman/bman_private.h
- create mode 100644 drivers/staging/fsl_qbman/bman_test.c
- create mode 100644 drivers/staging/fsl_qbman/bman_test.h
- create mode 100644 drivers/staging/fsl_qbman/bman_test_high.c
- create mode 100644 drivers/staging/fsl_qbman/bman_test_thresh.c
- create mode 100644 drivers/staging/fsl_qbman/dpa_alloc.c
- create mode 100644 drivers/staging/fsl_qbman/dpa_sys.h
- create mode 100644 drivers/staging/fsl_qbman/dpa_sys_arm.h
- create mode 100644 drivers/staging/fsl_qbman/dpa_sys_arm64.h
- create mode 100644 drivers/staging/fsl_qbman/dpa_sys_ppc32.h
- create mode 100644 drivers/staging/fsl_qbman/dpa_sys_ppc64.h
- create mode 100644 drivers/staging/fsl_qbman/fsl_usdpaa.c
- create mode 100644 drivers/staging/fsl_qbman/fsl_usdpaa_irq.c
- create mode 100644 drivers/staging/fsl_qbman/qbman_driver.c
- create mode 100644 drivers/staging/fsl_qbman/qman_config.c
- create mode 100644 drivers/staging/fsl_qbman/qman_debugfs.c
- create mode 100644 drivers/staging/fsl_qbman/qman_driver.c
- create mode 100644 drivers/staging/fsl_qbman/qman_high.c
- create mode 100644 drivers/staging/fsl_qbman/qman_low.h
- create mode 100644 drivers/staging/fsl_qbman/qman_private.h
- create mode 100644 drivers/staging/fsl_qbman/qman_test.c
- create mode 100644 drivers/staging/fsl_qbman/qman_test.h
- create mode 100644 drivers/staging/fsl_qbman/qman_test_high.c
- create mode 100644 drivers/staging/fsl_qbman/qman_test_hotpotato.c
- create mode 100644 drivers/staging/fsl_qbman/qman_utility.c
- create mode 100644 include/linux/fsl_bman.h
- create mode 100644 include/linux/fsl_qman.h
- create mode 100644 include/linux/fsl_usdpaa.h
-
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/Kconfig
-@@ -0,0 +1,228 @@
-+config FSL_SDK_DPA
-+	bool "Freescale Datapath Queue and Buffer management"
-+	depends on !FSL_DPAA
-+	select FSL_QMAN_FQ_LOOKUP if PPC64
-+	select FSL_QMAN_FQ_LOOKUP if ARM64
-+
-+
-+menu "Freescale Datapath QMan/BMan options"
-+	depends on FSL_SDK_DPA
-+
-+config FSL_DPA_CHECKING
-+	bool "additional driver checking"
-+	default n
-+	---help---
-+	  Compiles in additional checks to sanity-check the drivers and any
-+	  use of it by other code. Not recommended for performance.
-+
-+config FSL_DPA_CAN_WAIT
-+	bool
-+	default y
-+
-+config FSL_DPA_CAN_WAIT_SYNC
-+	bool
-+	default y
-+
-+config FSL_DPA_PIRQ_FAST
-+	bool
-+	default y
-+
-+config FSL_DPA_PIRQ_SLOW
-+	bool
-+	default y
-+
-+config FSL_DPA_PORTAL_SHARE
-+	bool
-+	default y
-+
-+config FSL_SDK_BMAN
-+	bool "Freescale Buffer Manager (BMan) support"
-+	default y
-+
-+if FSL_SDK_BMAN
-+
-+config FSL_BMAN_CONFIG
-+	bool "BMan device management"
-+	default y
-+	---help---
-+	  If this linux image is running natively, you need this option. If this
-+	  linux image is running as a guest OS under the hypervisor, only one
-+	  guest OS ("the control plane") needs this option.
-+
-+config FSL_BMAN_TEST
-+	tristate "BMan self-tests"
-+	default n
-+	---help---
-+	  This option compiles self-test code for BMan.
-+
-+config FSL_BMAN_TEST_HIGH
-+	bool "BMan high-level self-test"
-+	depends on FSL_BMAN_TEST
-+	default y
-+	---help---
-+	  This requires the presence of cpu-affine portals, and performs
-+	  high-level API testing with them (whichever portal(s) are affine to
-+	  the cpu(s) the test executes on).
-+
-+config FSL_BMAN_TEST_THRESH
-+	bool "BMan threshold test"
-+	depends on FSL_BMAN_TEST
-+	default y
-+	---help---
-+	  Multi-threaded (SMP) test of BMan pool depletion. A pool is seeded
-+	  before multiple threads (one per cpu) create pool objects to track
-+	  depletion state changes. The pool is then drained to empty by a
-+	  "drainer" thread, and the other threads that they observe exactly
-+	  the depletion state changes that are expected.
-+
-+config FSL_BMAN_DEBUGFS
-+	tristate "BMan debugfs interface"
-+	depends on DEBUG_FS
-+	default y
-+	---help---
-+	  This option compiles debugfs code for BMan.
-+
-+endif # FSL_SDK_BMAN
-+
-+config FSL_SDK_QMAN
-+	bool "Freescale Queue Manager (QMan) support"
-+	default y
-+
-+if FSL_SDK_QMAN
-+
-+config FSL_QMAN_POLL_LIMIT
-+	int
-+	default 32
-+
-+config FSL_QMAN_CONFIG
-+	bool "QMan device management"
-+	default y
-+	---help---
-+	  If this linux image is running natively, you need this option. If this
-+	  linux image is running as a guest OS under the hypervisor, only one
-+	  guest OS ("the control plane") needs this option.
-+
-+config FSL_QMAN_TEST
-+	tristate "QMan self-tests"
-+	default n
-+	---help---
-+	  This option compiles self-test code for QMan.
-+
-+config FSL_QMAN_TEST_STASH_POTATO
-+	bool "QMan 'hot potato' data-stashing self-test"
-+	depends on FSL_QMAN_TEST
-+	default y
-+	---help---
-+	  This performs a "hot potato" style test enqueuing/dequeuing a frame
-+	  across a series of FQs scheduled to different portals (and cpus), with
-+	  DQRR, data and context stashing always on.
-+
-+config FSL_QMAN_TEST_HIGH
-+	bool "QMan high-level self-test"
-+	depends on FSL_QMAN_TEST
-+	default y
-+	---help---
-+	  This requires the presence of cpu-affine portals, and performs
-+	  high-level API testing with them (whichever portal(s) are affine to
-+	  the cpu(s) the test executes on).
-+
-+config FSL_QMAN_DEBUGFS
-+	tristate "QMan debugfs interface"
-+	depends on DEBUG_FS
-+	default y
-+	---help---
-+	  This option compiles debugfs code for QMan.
-+
-+# H/w settings that can be hard-coded for now.
-+config FSL_QMAN_FQD_SZ
-+	int "size of Frame Queue Descriptor region"
-+	default 10
-+	---help---
-+	  This is the size of the FQD region defined as: PAGE_SIZE * (2^value)
-+	  ex: 10 => PAGE_SIZE * (2^10)
-+	  Note: Default device-trees now require minimum Kconfig setting of 10.
-+
-+config FSL_QMAN_PFDR_SZ
-+	int "size of the PFDR pool"
-+	default 13
-+	---help---
-+	  This is the size of the PFDR pool defined as: PAGE_SIZE * (2^value)
-+	  ex: 13 => PAGE_SIZE * (2^13)
-+
-+# Corenet initiator settings. Stash request queues are 4-deep to match cores'
-+# ability to snart. Stash priority is 3, other priorities are 2.
-+config FSL_QMAN_CI_SCHED_CFG_SRCCIV
-+	int
-+	depends on FSL_QMAN_CONFIG
-+	default 4
-+config FSL_QMAN_CI_SCHED_CFG_SRQ_W
-+	int
-+	depends on FSL_QMAN_CONFIG
-+	default 3
-+config FSL_QMAN_CI_SCHED_CFG_RW_W
-+	int
-+	depends on FSL_QMAN_CONFIG
-+	default 2
-+config FSL_QMAN_CI_SCHED_CFG_BMAN_W
-+	int
-+	depends on FSL_QMAN_CONFIG
-+	default 2
-+
-+# portal interrupt settings
-+config FSL_QMAN_PIRQ_DQRR_ITHRESH
-+	int
-+	default 12
-+config FSL_QMAN_PIRQ_MR_ITHRESH
-+	int
-+	default 4
-+config FSL_QMAN_PIRQ_IPERIOD
-+	int
-+	default 100
-+
-+# 64 bit kernel support
-+config FSL_QMAN_FQ_LOOKUP
-+	bool
-+	default n
-+
-+config QMAN_CEETM_UPDATE_PERIOD
-+	int "Token update period for shaping, in nanoseconds"
-+	default 1000
-+	 ---help---
-+	Traffic shaping works by performing token calculations (using
-+	credits) on shaper instances periodically. This update period
-+	sets the granularity for how often those token rate credit
-+	updates are performed, and thus determines the accuracy and
-+	range of traffic rates that can be configured by users. The
-+	reference manual recommends a 1 microsecond period as providing
-+	a good balance between granularity and range.
-+
-+	Unless you know what you are doing, leave this value at its default.
-+
-+config FSL_QMAN_INIT_TIMEOUT
-+	int "timeout for qman init stage, in seconds"
-+	default 10
-+	---help---
-+	The timeout setting to quit the initialization loop for non-control
-+	partition in case the control partition fails to boot-up.
-+
-+endif # FSL_SDK_QMAN
-+
-+config FSL_USDPAA
-+        bool "Freescale USDPAA process driver"
-+        depends on FSL_SDK_DPA
-+        default y
-+	---help---
-+        This driver provides user-space access to kernel-managed
-+        resource interfaces for USDPAA applications, on the assumption
-+        that each process will open this device once. Specifically, this
-+        device exposes functionality that would be awkward if exposed
-+        via the portal devices - ie. this device exposes functionality
-+        that is inherently process-wide rather than portal-specific.
-+        This device is necessary for obtaining access to DMA memory and
-+        for allocation of Qman and Bman resources. In short, if you wish
-+        to use USDPAA applications, you need this.
-+
-+        If unsure, say Y.
-+
-+
-+endmenu
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/Makefile
-@@ -0,0 +1,28 @@
-+subdir-ccflags-y := -Werror
-+
-+# Common
-+obj-$(CONFIG_FSL_SDK_DPA)		+= dpa_alloc.o
-+obj-$(CONFIG_FSL_SDK_DPA)	+= qbman_driver.o
-+
-+# Bman
-+obj-$(CONFIG_FSL_SDK_BMAN)		+= bman_high.o
-+obj-$(CONFIG_FSL_BMAN_CONFIG)	+= bman_config.o bman_driver.o
-+obj-$(CONFIG_FSL_BMAN_TEST)	+= bman_tester.o
-+obj-$(CONFIG_FSL_BMAN_DEBUGFS)  += bman_debugfs_interface.o
-+bman_tester-y			 = bman_test.o
-+bman_tester-$(CONFIG_FSL_BMAN_TEST_HIGH) += bman_test_high.o
-+bman_tester-$(CONFIG_FSL_BMAN_TEST_THRESH) += bman_test_thresh.o
-+bman_debugfs_interface-y	 = bman_debugfs.o
-+
-+# Qman
-+obj-$(CONFIG_FSL_SDK_QMAN)		+= qman_high.o qman_utility.o
-+obj-$(CONFIG_FSL_QMAN_CONFIG)	+= qman_config.o qman_driver.o
-+obj-$(CONFIG_FSL_QMAN_TEST)	+= qman_tester.o
-+qman_tester-y			 = qman_test.o
-+qman_tester-$(CONFIG_FSL_QMAN_TEST_STASH_POTATO) += qman_test_hotpotato.o
-+qman_tester-$(CONFIG_FSL_QMAN_TEST_HIGH) += qman_test_high.o
-+obj-$(CONFIG_FSL_QMAN_DEBUGFS)	+= qman_debugfs_interface.o
-+qman_debugfs_interface-y	 = qman_debugfs.o
-+
-+# USDPAA
-+obj-$(CONFIG_FSL_USDPAA)	+= fsl_usdpaa.o fsl_usdpaa_irq.o
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/bman_config.c
-@@ -0,0 +1,720 @@
-+/* Copyright (c) 2009-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <asm/cacheflush.h>
-+#include "bman_private.h"
-+#include <linux/of_reserved_mem.h>
-+
-+/* Last updated for v00.79 of the BG */
-+
-+struct bman;
-+
-+/* Register offsets */
-+#define REG_POOL_SWDET(n)	(0x0000 + ((n) * 0x04))
-+#define REG_POOL_HWDET(n)	(0x0100 + ((n) * 0x04))
-+#define REG_POOL_SWDXT(n)	(0x0200 + ((n) * 0x04))
-+#define REG_POOL_HWDXT(n)	(0x0300 + ((n) * 0x04))
-+#define REG_POOL_CONTENT(n)	(0x0600 + ((n) * 0x04))
-+#define REG_FBPR_FPC		0x0800
-+#define REG_STATE_IDLE		0x960
-+#define REG_STATE_STOP		0x964
-+#define REG_ECSR		0x0a00
-+#define REG_ECIR		0x0a04
-+#define REG_EADR		0x0a08
-+#define REG_EDATA(n)		(0x0a10 + ((n) * 0x04))
-+#define REG_SBEC(n)		(0x0a80 + ((n) * 0x04))
-+#define REG_IP_REV_1		0x0bf8
-+#define REG_IP_REV_2		0x0bfc
-+#define REG_FBPR_BARE		0x0c00
-+#define REG_FBPR_BAR		0x0c04
-+#define REG_FBPR_AR		0x0c10
-+#define REG_SRCIDR		0x0d04
-+#define REG_LIODNR		0x0d08
-+#define REG_ERR_ISR		0x0e00	/* + "enum bm_isr_reg" */
-+
-+/* Used by all error interrupt registers except 'inhibit' */
-+#define BM_EIRQ_IVCI	0x00000010	/* Invalid Command Verb */
-+#define BM_EIRQ_FLWI	0x00000008	/* FBPR Low Watermark */
-+#define BM_EIRQ_MBEI	0x00000004	/* Multi-bit ECC Error */
-+#define BM_EIRQ_SBEI	0x00000002	/* Single-bit ECC Error */
-+#define BM_EIRQ_BSCN	0x00000001	/* pool State Change Notification */
-+
-+/* BMAN_ECIR valid error bit */
-+#define PORTAL_ECSR_ERR	(BM_EIRQ_IVCI)
-+
-+union bman_ecir {
-+	u32 ecir_raw;
-+	struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+		u32 __reserved1:4;
-+		u32 portal_num:4;
-+		u32 __reserved2:12;
-+		u32 numb:4;
-+		u32 __reserved3:2;
-+		u32 pid:6;
-+#else
-+		u32 pid:6;
-+		u32 __reserved3:2;
-+		u32 numb:4;
-+		u32 __reserved2:12;
-+		u32 portal_num:4;
-+		u32 __reserved1:4;
-+#endif
-+	} __packed info;
-+};
-+
-+union bman_eadr {
-+	u32 eadr_raw;
-+	struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+		u32 __reserved1:5;
-+		u32 memid:3;
-+		u32 __reserved2:14;
-+		u32 eadr:10;
-+#else
-+		u32 eadr:10;
-+		u32 __reserved2:14;
-+		u32 memid:3;
-+		u32 __reserved1:5;
-+#endif
-+	} __packed info;
-+};
-+
-+struct bman_hwerr_txt {
-+	u32 mask;
-+	const char *txt;
-+};
-+
-+#define BMAN_HWE_TXT(a, b) { .mask = BM_EIRQ_##a, .txt = b }
-+
-+static const struct bman_hwerr_txt bman_hwerr_txts[] = {
-+	BMAN_HWE_TXT(IVCI, "Invalid Command Verb"),
-+	BMAN_HWE_TXT(FLWI, "FBPR Low Watermark"),
-+	BMAN_HWE_TXT(MBEI, "Multi-bit ECC Error"),
-+	BMAN_HWE_TXT(SBEI, "Single-bit ECC Error"),
-+	BMAN_HWE_TXT(BSCN, "Pool State Change Notification"),
-+};
-+#define BMAN_HWE_COUNT (sizeof(bman_hwerr_txts)/sizeof(struct bman_hwerr_txt))
-+
-+struct bman_error_info_mdata {
-+	u16 addr_mask;
-+	u16 bits;
-+	const char *txt;
-+};
-+
-+#define BMAN_ERR_MDATA(a, b, c) { .addr_mask = a, .bits = b, .txt = c}
-+static const struct bman_error_info_mdata error_mdata[] = {
-+	BMAN_ERR_MDATA(0x03FF, 192, "Stockpile memory"),
-+	BMAN_ERR_MDATA(0x00FF, 256, "SW portal ring memory port 1"),
-+	BMAN_ERR_MDATA(0x00FF, 256, "SW portal ring memory port 2"),
-+};
-+#define BMAN_ERR_MDATA_COUNT \
-+	(sizeof(error_mdata)/sizeof(struct bman_error_info_mdata))
-+
-+/* Add this in Kconfig */
-+#define BMAN_ERRS_TO_UNENABLE (BM_EIRQ_FLWI)
-+
-+/**
-+ * bm_err_isr_<reg>_<verb> - Manipulate global interrupt registers
-+ * @v: for accessors that write values, this is the 32-bit value
-+ *
-+ * Manipulates BMAN_ERR_ISR, BMAN_ERR_IER, BMAN_ERR_ISDR, BMAN_ERR_IIR. All
-+ * manipulations except bm_err_isr_[un]inhibit() use 32-bit masks composed of
-+ * the BM_EIRQ_*** definitions. Note that "bm_err_isr_enable_write" means
-+ * "write the enable register" rather than "enable the write register"!
-+ */
-+#define bm_err_isr_status_read(bm)	\
-+		__bm_err_isr_read(bm, bm_isr_status)
-+#define bm_err_isr_status_clear(bm, m)	\
-+		__bm_err_isr_write(bm, bm_isr_status, m)
-+#define bm_err_isr_enable_read(bm)	\
-+		__bm_err_isr_read(bm, bm_isr_enable)
-+#define bm_err_isr_enable_write(bm, v)	\
-+		__bm_err_isr_write(bm, bm_isr_enable, v)
-+#define bm_err_isr_disable_read(bm)	\
-+		__bm_err_isr_read(bm, bm_isr_disable)
-+#define bm_err_isr_disable_write(bm, v)	\
-+		__bm_err_isr_write(bm, bm_isr_disable, v)
-+#define bm_err_isr_inhibit(bm)		\
-+		__bm_err_isr_write(bm, bm_isr_inhibit, 1)
-+#define bm_err_isr_uninhibit(bm)	\
-+		__bm_err_isr_write(bm, bm_isr_inhibit, 0)
-+
-+/*
-+ * TODO: unimplemented registers
-+ *
-+ * BMAN_POOLk_SDCNT, BMAN_POOLk_HDCNT, BMAN_FULT,
-+ * BMAN_VLDPL, BMAN_EECC, BMAN_SBET, BMAN_EINJ
-+ */
-+
-+/* Encapsulate "struct bman *" as a cast of the register space address. */
-+
-+static struct bman *bm_create(void *regs)
-+{
-+	return (struct bman *)regs;
-+}
-+
-+static inline u32 __bm_in(struct bman *bm, u32 offset)
-+{
-+	return in_be32((void *)bm + offset);
-+}
-+static inline void __bm_out(struct bman *bm, u32 offset, u32 val)
-+{
-+	out_be32((void *)bm + offset, val);
-+}
-+#define bm_in(reg)		__bm_in(bm, REG_##reg)
-+#define bm_out(reg, val)	__bm_out(bm, REG_##reg, val)
-+
-+static u32 __bm_err_isr_read(struct bman *bm, enum bm_isr_reg n)
-+{
-+	return __bm_in(bm, REG_ERR_ISR + (n << 2));
-+}
-+
-+static void __bm_err_isr_write(struct bman *bm, enum bm_isr_reg n, u32 val)
-+{
-+	__bm_out(bm, REG_ERR_ISR + (n << 2), val);
-+}
-+
-+static void bm_get_version(struct bman *bm, u16 *id, u8 *major, u8 *minor)
-+{
-+	u32 v = bm_in(IP_REV_1);
-+	*id = (v >> 16);
-+	*major = (v >> 8) & 0xff;
-+	*minor = v & 0xff;
-+}
-+
-+static u32 __generate_thresh(u32 val, int roundup)
-+{
-+	u32 e = 0;	/* co-efficient, exponent */
-+	int oddbit = 0;
-+	while (val > 0xff) {
-+		oddbit = val & 1;
-+		val >>= 1;
-+		e++;
-+		if (roundup && oddbit)
-+			val++;
-+	}
-+	DPA_ASSERT(e < 0x10);
-+	return val | (e << 8);
-+}
-+
-+static void bm_set_pool(struct bman *bm, u8 pool, u32 swdet, u32 swdxt,
-+			u32 hwdet, u32 hwdxt)
-+{
-+	DPA_ASSERT(pool < bman_pool_max);
-+	bm_out(POOL_SWDET(pool), __generate_thresh(swdet, 0));
-+	bm_out(POOL_SWDXT(pool), __generate_thresh(swdxt, 1));
-+	bm_out(POOL_HWDET(pool), __generate_thresh(hwdet, 0));
-+	bm_out(POOL_HWDXT(pool), __generate_thresh(hwdxt, 1));
-+}
-+
-+static void bm_set_memory(struct bman *bm, u64 ba, int prio, u32 size)
-+{
-+	u32 exp = ilog2(size);
-+	/* choke if size isn't within range */
-+	DPA_ASSERT((size >= 4096) && (size <= 1073741824) &&
-+			is_power_of_2(size));
-+	/* choke if '[e]ba' has lower-alignment than 'size' */
-+	DPA_ASSERT(!(ba & (size - 1)));
-+	bm_out(FBPR_BARE, upper_32_bits(ba));
-+	bm_out(FBPR_BAR, lower_32_bits(ba));
-+	bm_out(FBPR_AR, (prio ? 0x40000000 : 0) | (exp - 1));
-+}
-+
-+/*****************/
-+/* Config driver */
-+/*****************/
-+
-+/* TODO: Kconfig these? */
-+#define DEFAULT_FBPR_SZ	(PAGE_SIZE << 12)
-+
-+/* We support only one of these. */
-+static struct bman *bm;
-+static struct device_node *bm_node;
-+
-+/* And this state belongs to 'bm'. It is set during fsl_bman_init(), but used
-+ * during bman_init_ccsr(). */
-+static dma_addr_t fbpr_a;
-+static size_t fbpr_sz = DEFAULT_FBPR_SZ;
-+
-+static int bman_fbpr(struct reserved_mem *rmem)
-+{
-+	fbpr_a = rmem->base;
-+	fbpr_sz = rmem->size;
-+
-+	WARN_ON(!(fbpr_a && fbpr_sz));
-+
-+	return 0;
-+}
-+RESERVEDMEM_OF_DECLARE(bman_fbpr, "fsl,bman-fbpr", bman_fbpr);
-+
-+static int __init fsl_bman_init(struct device_node *node)
-+{
-+	struct resource res;
-+	u32 __iomem *regs;
-+	const char *s;
-+	int ret, standby = 0;
-+	u16 id;
-+	u8 major, minor;
-+
-+	ret = of_address_to_resource(node, 0, &res);
-+	if (ret) {
-+		pr_err("Can't get %s property 'reg'\n",
-+				node->full_name);
-+		return ret;
-+	}
-+	s = of_get_property(node, "fsl,hv-claimable", &ret);
-+	if (s && !strcmp(s, "standby"))
-+		standby = 1;
-+	/* Global configuration */
-+	regs = ioremap(res.start, res.end - res.start + 1);
-+	bm = bm_create(regs);
-+	BUG_ON(!bm);
-+	bm_node = node;
-+	bm_get_version(bm, &id, &major, &minor);
-+	pr_info("Bman ver:%04x,%02x,%02x\n", id, major, minor);
-+	if ((major == 1) && (minor == 0)) {
-+		bman_ip_rev = BMAN_REV10;
-+		bman_pool_max = 64;
-+	} else if ((major == 2) && (minor == 0)) {
-+		bman_ip_rev = BMAN_REV20;
-+		bman_pool_max = 8;
-+	} else if ((major == 2) && (minor == 1)) {
-+		bman_ip_rev = BMAN_REV21;
-+		bman_pool_max = 64;
-+	} else {
-+		pr_warn("unknown Bman version, default to rev1.0\n");
-+	}
-+
-+	if (standby) {
-+		pr_info("  -> in standby mode\n");
-+		return 0;
-+	}
-+	return 0;
-+}
-+
-+int bman_have_ccsr(void)
-+{
-+	return bm ? 1 : 0;
-+}
-+
-+int bm_pool_set(u32 bpid, const u32 *thresholds)
-+{
-+	if (!bm)
-+		return -ENODEV;
-+	bm_set_pool(bm, bpid, thresholds[0],
-+		    thresholds[1], thresholds[2],
-+		    thresholds[3]);
-+	return 0;
-+}
-+EXPORT_SYMBOL(bm_pool_set);
-+
-+__init int bman_init_early(void)
-+{
-+	struct device_node *dn;
-+	int ret;
-+
-+	for_each_compatible_node(dn, NULL, "fsl,bman") {
-+		if (bm)
-+			pr_err("%s: only one 'fsl,bman' allowed\n",
-+				dn->full_name);
-+		else {
-+			if (!of_device_is_available(dn))
-+				continue;
-+
-+			ret = fsl_bman_init(dn);
-+			BUG_ON(ret);
-+		}
-+	}
-+	return 0;
-+}
-+postcore_initcall_sync(bman_init_early);
-+
-+
-+static void log_edata_bits(u32 bit_count)
-+{
-+	u32 i, j, mask = 0xffffffff;
-+
-+	pr_warn("Bman ErrInt, EDATA:\n");
-+	i = bit_count/32;
-+	if (bit_count%32) {
-+		i++;
-+		mask = ~(mask << bit_count%32);
-+	}
-+	j = 16-i;
-+	pr_warn("  0x%08x\n", bm_in(EDATA(j)) & mask);
-+	j++;
-+	for (; j < 16; j++)
-+		pr_warn("  0x%08x\n", bm_in(EDATA(j)));
-+}
-+
-+static void log_additional_error_info(u32 isr_val, u32 ecsr_val)
-+{
-+	union bman_ecir ecir_val;
-+	union bman_eadr eadr_val;
-+
-+	ecir_val.ecir_raw = bm_in(ECIR);
-+	/* Is portal info valid */
-+	if (ecsr_val & PORTAL_ECSR_ERR) {
-+		pr_warn("Bman ErrInt: SWP id %d, numb %d, pid %d\n",
-+			ecir_val.info.portal_num, ecir_val.info.numb,
-+			ecir_val.info.pid);
-+	}
-+	if (ecsr_val & (BM_EIRQ_SBEI|BM_EIRQ_MBEI)) {
-+		eadr_val.eadr_raw = bm_in(EADR);
-+		pr_warn("Bman ErrInt: EADR Memory: %s, 0x%x\n",
-+			error_mdata[eadr_val.info.memid].txt,
-+			error_mdata[eadr_val.info.memid].addr_mask
-+				& eadr_val.info.eadr);
-+		log_edata_bits(error_mdata[eadr_val.info.memid].bits);
-+	}
-+}
-+
-+/* Bman interrupt handler */
-+static irqreturn_t bman_isr(int irq, void *ptr)
-+{
-+	u32 isr_val, ier_val, ecsr_val, isr_mask, i;
-+
-+	ier_val = bm_err_isr_enable_read(bm);
-+	isr_val = bm_err_isr_status_read(bm);
-+	ecsr_val = bm_in(ECSR);
-+	isr_mask = isr_val & ier_val;
-+
-+	if (!isr_mask)
-+		return IRQ_NONE;
-+	for (i = 0; i < BMAN_HWE_COUNT; i++) {
-+		if (bman_hwerr_txts[i].mask & isr_mask) {
-+			pr_warn("Bman ErrInt: %s\n", bman_hwerr_txts[i].txt);
-+			if (bman_hwerr_txts[i].mask & ecsr_val) {
-+				log_additional_error_info(isr_mask, ecsr_val);
-+				/* Re-arm error capture registers */
-+				bm_out(ECSR, ecsr_val);
-+			}
-+			if (bman_hwerr_txts[i].mask & BMAN_ERRS_TO_UNENABLE) {
-+				pr_devel("Bman un-enabling error 0x%x\n",
-+					bman_hwerr_txts[i].mask);
-+				ier_val &= ~bman_hwerr_txts[i].mask;
-+				bm_err_isr_enable_write(bm, ier_val);
-+			}
-+		}
-+	}
-+	bm_err_isr_status_clear(bm, isr_val);
-+	return IRQ_HANDLED;
-+}
-+
-+static int __bind_irq(void)
-+{
-+	int ret, err_irq;
-+
-+	err_irq = of_irq_to_resource(bm_node, 0, NULL);
-+	if (err_irq == 0) {
-+		pr_info("Can't get %s property '%s'\n", bm_node->full_name,
-+			"interrupts");
-+		return -ENODEV;
-+	}
-+	ret = request_irq(err_irq, bman_isr, IRQF_SHARED, "bman-err", bm_node);
-+	if (ret)  {
-+		pr_err("request_irq() failed %d for '%s'\n", ret,
-+			bm_node->full_name);
-+		return -ENODEV;
-+	}
-+	/* Disable Buffer Pool State Change */
-+	bm_err_isr_disable_write(bm, BM_EIRQ_BSCN);
-+	/* Write-to-clear any stale bits, (eg. starvation being asserted prior
-+	 * to resource allocation during driver init). */
-+	bm_err_isr_status_clear(bm, 0xffffffff);
-+	/* Enable Error Interrupts */
-+	bm_err_isr_enable_write(bm, 0xffffffff);
-+	return 0;
-+}
-+
-+int bman_init_ccsr(struct device_node *node)
-+{
-+	int ret;
-+	if (!bman_have_ccsr())
-+		return 0;
-+	if (node != bm_node)
-+		return -EINVAL;
-+	/* FBPR memory */
-+	bm_set_memory(bm, fbpr_a, 0, fbpr_sz);
-+	pr_info("bman-fbpr addr %pad size 0x%zx\n", &fbpr_a, fbpr_sz);
-+
-+	ret = __bind_irq();
-+	if (ret)
-+		return ret;
-+	return 0;
-+}
-+
-+u32 bm_pool_free_buffers(u32 bpid)
-+{
-+	return bm_in(POOL_CONTENT(bpid));
-+}
-+
-+#ifdef CONFIG_SYSFS
-+
-+#define DRV_NAME "fsl-bman"
-+#define SBEC_MAX_ID 1
-+#define SBEC_MIN_ID 0
-+
-+static ssize_t show_fbpr_fpc(struct device *dev,
-+	struct device_attribute *dev_attr, char *buf)
-+{
-+	return snprintf(buf, PAGE_SIZE, "%u\n", bm_in(FBPR_FPC));
-+};
-+
-+static ssize_t show_pool_count(struct device *dev,
-+	struct device_attribute *dev_attr, char *buf)
-+{
-+	u32 data;
-+	int i;
-+
-+	if (!sscanf(dev_attr->attr.name, "%d", &i) || (i >= bman_pool_max))
-+		return -EINVAL;
-+	data = bm_in(POOL_CONTENT(i));
-+	return snprintf(buf, PAGE_SIZE, "%d\n", data);
-+};
-+
-+static ssize_t show_err_isr(struct device *dev,
-+	struct device_attribute *dev_attr, char *buf)
-+{
-+	return snprintf(buf, PAGE_SIZE, "0x%08x\n", bm_in(ERR_ISR));
-+};
-+
-+static ssize_t show_sbec(struct device *dev,
-+	struct device_attribute *dev_attr, char *buf)
-+{
-+	int i;
-+
-+	if (!sscanf(dev_attr->attr.name, "sbec_%d", &i))
-+		return -EINVAL;
-+	if (i < SBEC_MIN_ID || i > SBEC_MAX_ID)
-+		return -EINVAL;
-+	return snprintf(buf, PAGE_SIZE, "%u\n", bm_in(SBEC(i)));
-+};
-+
-+static DEVICE_ATTR(err_isr, S_IRUSR, show_err_isr, NULL);
-+static DEVICE_ATTR(fbpr_fpc, S_IRUSR, show_fbpr_fpc, NULL);
-+
-+/* Didn't use DEVICE_ATTR as 64 of this would be required.
-+ * Initialize them when needed. */
-+static char *name_attrs_pool_count; /* "xx" + null-terminator */
-+static struct device_attribute *dev_attr_buffer_pool_count;
-+
-+static DEVICE_ATTR(sbec_0, S_IRUSR, show_sbec, NULL);
-+static DEVICE_ATTR(sbec_1, S_IRUSR, show_sbec, NULL);
-+
-+static struct attribute *bman_dev_attributes[] = {
-+	&dev_attr_fbpr_fpc.attr,
-+	&dev_attr_err_isr.attr,
-+	NULL
-+};
-+
-+static struct attribute *bman_dev_ecr_attributes[] = {
-+	&dev_attr_sbec_0.attr,
-+	&dev_attr_sbec_1.attr,
-+	NULL
-+};
-+
-+static struct attribute **bman_dev_pool_count_attributes;
-+
-+
-+/* root level */
-+static const struct attribute_group bman_dev_attr_grp = {
-+	.name = NULL,
-+	.attrs = bman_dev_attributes
-+};
-+static const struct attribute_group bman_dev_ecr_grp = {
-+	.name = "error_capture",
-+	.attrs = bman_dev_ecr_attributes
-+};
-+static struct attribute_group bman_dev_pool_countent_grp = {
-+	.name = "pool_count",
-+};
-+
-+static int of_fsl_bman_remove(struct platform_device *ofdev)
-+{
-+	sysfs_remove_group(&ofdev->dev.kobj, &bman_dev_attr_grp);
-+	return 0;
-+};
-+
-+static int of_fsl_bman_probe(struct platform_device *ofdev)
-+{
-+	int ret, i;
-+
-+	ret = sysfs_create_group(&ofdev->dev.kobj, &bman_dev_attr_grp);
-+	if (ret)
-+		goto done;
-+	ret = sysfs_create_group(&ofdev->dev.kobj, &bman_dev_ecr_grp);
-+	if (ret)
-+		goto del_group_0;
-+
-+	name_attrs_pool_count = kmalloc(sizeof(char) * bman_pool_max * 3,
-+								 GFP_KERNEL);
-+	if (!name_attrs_pool_count) {
-+		pr_err("Can't alloc name_attrs_pool_count\n");
-+		goto del_group_1;
-+	}
-+
-+	dev_attr_buffer_pool_count = kmalloc(sizeof(struct device_attribute) *
-+					bman_pool_max, GFP_KERNEL);
-+	if (!dev_attr_buffer_pool_count) {
-+		pr_err("Can't alloc dev_attr-buffer_pool_count\n");
-+		goto del_group_2;
-+	}
-+
-+	bman_dev_pool_count_attributes = kmalloc(sizeof(struct attribute *) *
-+			 (bman_pool_max + 1), GFP_KERNEL);
-+	if (!bman_dev_pool_count_attributes) {
-+			pr_err("can't alloc bman_dev_pool_count_attributes\n");
-+			goto del_group_3;
-+	}
-+
-+	for (i = 0; i < bman_pool_max; i++) {
-+		ret = scnprintf((name_attrs_pool_count + i * 3), 3, "%d", i);
-+		if (!ret)
-+			goto del_group_4;
-+		dev_attr_buffer_pool_count[i].attr.name =
-+			(name_attrs_pool_count + i * 3);
-+		dev_attr_buffer_pool_count[i].attr.mode = S_IRUSR;
-+		dev_attr_buffer_pool_count[i].show = show_pool_count;
-+		bman_dev_pool_count_attributes[i] =
-+			&dev_attr_buffer_pool_count[i].attr;
-+		sysfs_attr_init(bman_dev_pool_count_attributes[i]);
-+	}
-+	bman_dev_pool_count_attributes[bman_pool_max] = NULL;
-+
-+	bman_dev_pool_countent_grp.attrs = bman_dev_pool_count_attributes;
-+
-+	ret = sysfs_create_group(&ofdev->dev.kobj, &bman_dev_pool_countent_grp);
-+	if (ret)
-+		goto del_group_4;
-+
-+	goto done;
-+
-+del_group_4:
-+	kfree(bman_dev_pool_count_attributes);
-+del_group_3:
-+	kfree(dev_attr_buffer_pool_count);
-+del_group_2:
-+	kfree(name_attrs_pool_count);
-+del_group_1:
-+	sysfs_remove_group(&ofdev->dev.kobj, &bman_dev_ecr_grp);
-+del_group_0:
-+	sysfs_remove_group(&ofdev->dev.kobj, &bman_dev_attr_grp);
-+done:
-+	if (ret)
-+		dev_err(&ofdev->dev,
-+			"Cannot create dev attributes ret=%d\n", ret);
-+	return ret;
-+};
-+
-+static struct of_device_id of_fsl_bman_ids[] = {
-+	{
-+		.compatible = "fsl,bman",
-+	},
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, of_fsl_bman_ids);
-+
-+#ifdef CONFIG_SUSPEND
-+static u32 saved_isdr;
-+
-+static int bman_pm_suspend_noirq(struct device *dev)
-+{
-+	uint32_t idle_state;
-+
-+	suspend_unused_bportal();
-+	/* save isdr, disable all, clear isr */
-+	saved_isdr = bm_err_isr_disable_read(bm);
-+	bm_err_isr_disable_write(bm, 0xffffffff);
-+	bm_err_isr_status_clear(bm, 0xffffffff);
-+
-+	if (bman_ip_rev < BMAN_REV21) {
-+#ifdef CONFIG_PM_DEBUG
-+		pr_info("Bman version doesn't have STATE_IDLE\n");
-+#endif
-+		return 0;
-+	}
-+	idle_state = bm_in(STATE_IDLE);
-+	if (!(idle_state & 0x1)) {
-+		pr_err("Bman not idle 0x%x aborting\n", idle_state);
-+		bm_err_isr_disable_write(bm, saved_isdr);
-+		resume_unused_bportal();
-+		return -EBUSY;
-+	}
-+#ifdef CONFIG_PM_DEBUG
-+	pr_info("Bman suspend code, IDLE_STAT = 0x%x\n", idle_state);
-+#endif
-+	return 0;
-+}
-+
-+static int bman_pm_resume_noirq(struct device *dev)
-+{
-+	/* restore isdr */
-+	bm_err_isr_disable_write(bm, saved_isdr);
-+	resume_unused_bportal();
-+	return 0;
-+}
-+#else
-+#define bman_pm_suspend_noirq	NULL
-+#define bman_pm_resume_noirq	NULL
-+#endif
-+
-+static const struct dev_pm_ops bman_pm_ops = {
-+	.suspend_noirq = bman_pm_suspend_noirq,
-+	.resume_noirq = bman_pm_resume_noirq,
-+};
-+
-+static struct platform_driver of_fsl_bman_driver = {
-+	.driver = {
-+		.owner = THIS_MODULE,
-+		.name = DRV_NAME,
-+		.of_match_table = of_fsl_bman_ids,
-+		.pm = &bman_pm_ops,
-+	},
-+	.probe = of_fsl_bman_probe,
-+	.remove = of_fsl_bman_remove,
-+};
-+
-+static int bman_ctrl_init(void)
-+{
-+	return platform_driver_register(&of_fsl_bman_driver);
-+}
-+
-+static void bman_ctrl_exit(void)
-+{
-+	platform_driver_unregister(&of_fsl_bman_driver);
-+}
-+
-+module_init(bman_ctrl_init);
-+module_exit(bman_ctrl_exit);
-+
-+#endif /* CONFIG_SYSFS */
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/bman_debugfs.c
-@@ -0,0 +1,119 @@
-+/* Copyright 2010-2011 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+#include <linux/module.h>
-+#include <linux/fsl_bman.h>
-+#include <linux/debugfs.h>
-+#include <linux/seq_file.h>
-+#include <linux/uaccess.h>
-+
-+static struct dentry *dfs_root; /* debugfs root directory */
-+
-+/*******************************************************************************
-+ *  Query Buffer Pool State
-+ ******************************************************************************/
-+static int query_bp_state_show(struct seq_file *file, void *offset)
-+{
-+	int ret;
-+	struct bm_pool_state state;
-+	int i, j;
-+	u32 mask;
-+
-+	memset(&state, 0, sizeof(struct bm_pool_state));
-+	ret = bman_query_pools(&state);
-+	if (ret) {
-+		seq_printf(file, "Error %d\n", ret);
-+		return 0;
-+	}
-+	seq_puts(file, "bp_id  free_buffers_avail  bp_depleted\n");
-+	for (i = 0; i < 2; i++) {
-+		mask = 0x80000000;
-+		for (j = 0; j < 32; j++) {
-+			seq_printf(file,
-+			 "  %-2u           %-3s             %-3s\n",
-+			 (i*32)+j,
-+			 (state.as.state.__state[i] & mask) ? "no" : "yes",
-+			 (state.ds.state.__state[i] & mask) ? "yes" : "no");
-+			 mask >>= 1;
-+		}
-+	}
-+	return 0;
-+}
-+
-+static int query_bp_state_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, query_bp_state_show, NULL);
-+}
-+
-+static const struct file_operations query_bp_state_fops = {
-+	.owner          = THIS_MODULE,
-+	.open		= query_bp_state_open,
-+	.read           = seq_read,
-+	.release	= single_release,
-+};
-+
-+static int __init bman_debugfs_module_init(void)
-+{
-+	int ret = 0;
-+	struct dentry *d;
-+
-+	dfs_root = debugfs_create_dir("bman", NULL);
-+
-+	if (dfs_root == NULL) {
-+		ret = -ENOMEM;
-+		pr_err("Cannot create bman debugfs dir\n");
-+		goto _return;
-+	}
-+	d = debugfs_create_file("query_bp_state",
-+		S_IRUGO,
-+		dfs_root,
-+		NULL,
-+		&query_bp_state_fops);
-+	if (d == NULL) {
-+		ret = -ENOMEM;
-+		pr_err("Cannot create query_bp_state\n");
-+		goto _return;
-+	}
-+	return 0;
-+
-+_return:
-+	debugfs_remove_recursive(dfs_root);
-+	return ret;
-+}
-+
-+static void __exit bman_debugfs_module_exit(void)
-+{
-+	debugfs_remove_recursive(dfs_root);
-+}
-+
-+
-+module_init(bman_debugfs_module_init);
-+module_exit(bman_debugfs_module_exit);
-+MODULE_LICENSE("Dual BSD/GPL");
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/bman_driver.c
-@@ -0,0 +1,559 @@
-+/* Copyright 2008-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+#include "bman_low.h"
-+#ifdef CONFIG_HOTPLUG_CPU
-+#include <linux/cpu.h>
-+#endif
-+/*
-+ * Global variables of the max portal/pool number this bman version supported
-+ */
-+u16 bman_ip_rev;
-+EXPORT_SYMBOL(bman_ip_rev);
-+u16 bman_pool_max;
-+EXPORT_SYMBOL(bman_pool_max);
-+static u16 bman_portal_max;
-+
-+/* After initialising cpus that own shared portal configs, we cache the
-+ * resulting portals (ie. not just the configs) in this array. Then we
-+ * initialise slave cpus that don't have their own portals, redirecting them to
-+ * portals from this cache in a round-robin assignment. */
-+static struct bman_portal *shared_portals[NR_CPUS];
-+static int num_shared_portals;
-+static int shared_portals_idx;
-+static LIST_HEAD(unused_pcfgs);
-+static DEFINE_SPINLOCK(unused_pcfgs_lock);
-+static void *affine_bportals[NR_CPUS];
-+
-+static int __init fsl_bpool_init(struct device_node *node)
-+{
-+	int ret;
-+	u32 *thresh, *bpid = (u32 *)of_get_property(node, "fsl,bpid", &ret);
-+	if (!bpid || (ret != 4)) {
-+		pr_err("Can't get %s property 'fsl,bpid'\n", node->full_name);
-+		return -ENODEV;
-+	}
-+	thresh = (u32 *)of_get_property(node, "fsl,bpool-thresholds", &ret);
-+	if (thresh) {
-+		if (ret != 16) {
-+			pr_err("Invalid %s property '%s'\n",
-+				node->full_name, "fsl,bpool-thresholds");
-+			return -ENODEV;
-+		}
-+	}
-+	if (thresh) {
-+#ifdef CONFIG_FSL_BMAN_CONFIG
-+		ret = bm_pool_set(be32_to_cpu(*bpid), thresh);
-+		if (ret)
-+			pr_err("No CCSR node for %s property '%s'\n",
-+				node->full_name, "fsl,bpool-thresholds");
-+		return ret;
-+#else
-+		pr_err("Ignoring %s property '%s', no CCSR support\n",
-+			node->full_name, "fsl,bpool-thresholds");
-+#endif
-+	}
-+	return 0;
-+}
-+
-+static int __init fsl_bpid_range_init(struct device_node *node)
-+{
-+	int ret;
-+	u32 *range = (u32 *)of_get_property(node, "fsl,bpid-range", &ret);
-+	if (!range) {
-+		pr_err("No 'fsl,bpid-range' property in node %s\n",
-+			node->full_name);
-+		return -EINVAL;
-+	}
-+	if (ret != 8) {
-+		pr_err("'fsl,bpid-range' is not a 2-cell range in node %s\n",
-+			node->full_name);
-+		return -EINVAL;
-+	}
-+	bman_seed_bpid_range(be32_to_cpu(range[0]), be32_to_cpu(range[1]));
-+	pr_info("Bman: BPID allocator includes range %d:%d\n",
-+		be32_to_cpu(range[0]), be32_to_cpu(range[1]));
-+	return 0;
-+}
-+
-+static struct bm_portal_config * __init parse_pcfg(struct device_node *node)
-+{
-+	struct bm_portal_config *pcfg;
-+	const u32 *index;
-+	int irq, ret;
-+	resource_size_t len;
-+
-+	pcfg = kmalloc(sizeof(*pcfg), GFP_KERNEL);
-+	if (!pcfg) {
-+		pr_err("can't allocate portal config");
-+		return NULL;
-+	}
-+
-+	if (of_device_is_compatible(node, "fsl,bman-portal-1.0") ||
-+		of_device_is_compatible(node, "fsl,bman-portal-1.0.0")) {
-+		bman_ip_rev = BMAN_REV10;
-+		bman_pool_max = 64;
-+		bman_portal_max = 10;
-+	} else if (of_device_is_compatible(node, "fsl,bman-portal-2.0") ||
-+		of_device_is_compatible(node, "fsl,bman-portal-2.0.8")) {
-+		bman_ip_rev = BMAN_REV20;
-+		bman_pool_max = 8;
-+		bman_portal_max = 3;
-+	} else if (of_device_is_compatible(node, "fsl,bman-portal-2.1.0")) {
-+		bman_ip_rev = BMAN_REV21;
-+		bman_pool_max = 64;
-+		bman_portal_max = 50;
-+	} else if (of_device_is_compatible(node, "fsl,bman-portal-2.1.1")) {
-+		bman_ip_rev = BMAN_REV21;
-+		bman_pool_max = 64;
-+		bman_portal_max = 25;
-+	} else if (of_device_is_compatible(node, "fsl,bman-portal-2.1.2")) {
-+		bman_ip_rev = BMAN_REV21;
-+		bman_pool_max = 64;
-+		bman_portal_max = 18;
-+	} else if (of_device_is_compatible(node, "fsl,bman-portal-2.1.3")) {
-+		bman_ip_rev = BMAN_REV21;
-+		bman_pool_max = 64;
-+		bman_portal_max = 10;
-+	} else {
-+		pr_warn("unknown BMan version in portal node,"
-+			"default to rev1.0\n");
-+		bman_ip_rev = BMAN_REV10;
-+		bman_pool_max = 64;
-+		bman_portal_max = 10;
-+	}
-+
-+	ret = of_address_to_resource(node, DPA_PORTAL_CE,
-+				&pcfg->addr_phys[DPA_PORTAL_CE]);
-+	if (ret) {
-+		pr_err("Can't get %s property 'reg::CE'\n", node->full_name);
-+		goto err;
-+	}
-+	ret = of_address_to_resource(node, DPA_PORTAL_CI,
-+				&pcfg->addr_phys[DPA_PORTAL_CI]);
-+	if (ret) {
-+		pr_err("Can't get %s property 'reg::CI'\n", node->full_name);
-+		goto err;
-+	}
-+
-+	index = of_get_property(node, "cell-index", &ret);
-+	if (!index || (ret != 4)) {
-+		pr_err("Can't get %s property '%s'\n", node->full_name,
-+			"cell-index");
-+		goto err;
-+	}
-+	if (be32_to_cpu(*index) >= bman_portal_max) {
-+		pr_err("BMan portal cell index %d out of range, max %d\n",
-+		       be32_to_cpu(*index), bman_portal_max);
-+		goto err;
-+	}
-+
-+	pcfg->public_cfg.cpu = -1;
-+
-+	irq = irq_of_parse_and_map(node, 0);
-+	if (irq == 0) {
-+		pr_err("Can't get %s property 'interrupts'\n", node->full_name);
-+		goto err;
-+	}
-+	pcfg->public_cfg.irq = irq;
-+	pcfg->public_cfg.index = be32_to_cpu(*index);
-+	bman_depletion_fill(&pcfg->public_cfg.mask);
-+
-+	len = resource_size(&pcfg->addr_phys[DPA_PORTAL_CE]);
-+	if (len != (unsigned long)len)
-+		goto err;
-+
-+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+	pcfg->addr_virt[DPA_PORTAL_CE] = ioremap_cache_ns(
-+                                pcfg->addr_phys[DPA_PORTAL_CE].start,
-+                                resource_size(&pcfg->addr_phys[DPA_PORTAL_CE]));
-+        pcfg->addr_virt[DPA_PORTAL_CI] = ioremap(
-+                                pcfg->addr_phys[DPA_PORTAL_CI].start,
-+                                resource_size(&pcfg->addr_phys[DPA_PORTAL_CI]));
-+
-+#else
-+	pcfg->addr_virt[DPA_PORTAL_CE] = ioremap_prot(
-+				pcfg->addr_phys[DPA_PORTAL_CE].start,
-+				(unsigned long)len,
-+				0);
-+	pcfg->addr_virt[DPA_PORTAL_CI] = ioremap_prot(
-+				pcfg->addr_phys[DPA_PORTAL_CI].start,
-+				resource_size(&pcfg->addr_phys[DPA_PORTAL_CI]),
-+				_PAGE_GUARDED | _PAGE_NO_CACHE);
-+#endif
-+	/* disable bp depletion */
-+	__raw_writel(0x0, pcfg->addr_virt[DPA_PORTAL_CI] + BM_REG_SCN(0));
-+	__raw_writel(0x0, pcfg->addr_virt[DPA_PORTAL_CI] + BM_REG_SCN(1));
-+	return pcfg;
-+err:
-+	kfree(pcfg);
-+	return NULL;
-+}
-+
-+static struct bm_portal_config *get_pcfg(struct list_head *list)
-+{
-+	struct bm_portal_config *pcfg;
-+	if (list_empty(list))
-+		return NULL;
-+	pcfg = list_entry(list->prev, struct bm_portal_config, list);
-+	list_del(&pcfg->list);
-+	return pcfg;
-+}
-+
-+static struct bm_portal_config *get_pcfg_idx(struct list_head *list,
-+					     uint32_t idx)
-+{
-+	struct bm_portal_config *pcfg;
-+	if (list_empty(list))
-+		return NULL;
-+	list_for_each_entry(pcfg, list, list) {
-+		if (pcfg->public_cfg.index == idx) {
-+			list_del(&pcfg->list);
-+			return pcfg;
-+		}
-+	}
-+	return NULL;
-+}
-+
-+struct bm_portal_config *bm_get_unused_portal(void)
-+{
-+	return bm_get_unused_portal_idx(QBMAN_ANY_PORTAL_IDX);
-+}
-+
-+struct bm_portal_config *bm_get_unused_portal_idx(uint32_t idx)
-+{
-+	struct bm_portal_config *ret;
-+	spin_lock(&unused_pcfgs_lock);
-+	if (idx == QBMAN_ANY_PORTAL_IDX)
-+		ret = get_pcfg(&unused_pcfgs);
-+	else
-+		ret = get_pcfg_idx(&unused_pcfgs, idx);
-+	spin_unlock(&unused_pcfgs_lock);
-+	return ret;
-+}
-+
-+void bm_put_unused_portal(struct bm_portal_config *pcfg)
-+{
-+	spin_lock(&unused_pcfgs_lock);
-+	list_add(&pcfg->list, &unused_pcfgs);
-+	spin_unlock(&unused_pcfgs_lock);
-+}
-+
-+static struct bman_portal *init_pcfg(struct bm_portal_config *pcfg)
-+{
-+	struct bman_portal *p;
-+	p = bman_create_affine_portal(pcfg);
-+	if (p) {
-+#ifdef CONFIG_FSL_DPA_PIRQ_SLOW
-+		bman_p_irqsource_add(p, BM_PIRQ_RCRI | BM_PIRQ_BSCN);
-+#endif
-+		pr_info("Bman portal %sinitialised, cpu %d\n",
-+			pcfg->public_cfg.is_shared ? "(shared) " : "",
-+			pcfg->public_cfg.cpu);
-+		affine_bportals[pcfg->public_cfg.cpu] = p;
-+	} else
-+		pr_crit("Bman portal failure on cpu %d\n",
-+			pcfg->public_cfg.cpu);
-+	return p;
-+}
-+
-+static void init_slave(int cpu)
-+{
-+	struct bman_portal *p;
-+	p = bman_create_affine_slave(shared_portals[shared_portals_idx++], cpu);
-+	if (!p)
-+		pr_err("Bman slave portal failure on cpu %d\n", cpu);
-+	else
-+		pr_info("Bman portal %sinitialised, cpu %d\n", "(slave) ", cpu);
-+	if (shared_portals_idx >= num_shared_portals)
-+		shared_portals_idx = 0;
-+	affine_bportals[cpu] = p;
-+}
-+
-+/* Bootarg "bportals=[...]" has the same syntax as "qportals=", and so the
-+ * parsing is in dpa_sys.h. The syntax is a comma-separated list of indexes
-+ * and/or ranges of indexes, with each being optionally prefixed by "s" to
-+ * explicitly mark it or them for sharing.
-+ *    Eg;
-+ *	  bportals=s0,1-3,s4
-+ * means that cpus 1,2,3 get "unshared" portals, cpus 0 and 4 get "shared"
-+ * portals, and any remaining cpus share the portals that are assigned to cpus 0
-+ * or 4, selected in a round-robin fashion. (In this example, cpu 5 would share
-+ * cpu 0's portal, cpu 6 would share cpu4's portal, and cpu 7 would share cpu
-+ * 0's portal.) */
-+static struct cpumask want_unshared __initdata; /* cpus requested without "s" */
-+static struct cpumask want_shared __initdata; /* cpus requested with "s" */
-+
-+static int __init parse_bportals(char *str)
-+{
-+	return parse_portals_bootarg(str, &want_shared, &want_unshared,
-+				     "bportals");
-+}
-+__setup("bportals=", parse_bportals);
-+
-+static int bman_offline_cpu(unsigned int cpu)
-+{
-+	struct bman_portal *p;
-+	const struct bm_portal_config *pcfg;
-+	p = (struct bman_portal *)affine_bportals[cpu];
-+	if (p) {
-+		pcfg = bman_get_bm_portal_config(p);
-+		if (pcfg)
-+			irq_set_affinity(pcfg->public_cfg.irq, cpumask_of(0));
-+	}
-+	return 0;
-+}
-+
-+#ifdef CONFIG_HOTPLUG_CPU
-+static int bman_online_cpu(unsigned int cpu)
-+{
-+	struct bman_portal *p;
-+	const struct bm_portal_config *pcfg;
-+	p = (struct bman_portal *)affine_bportals[cpu];
-+	if (p) {
-+		pcfg = bman_get_bm_portal_config(p);
-+		if (pcfg)
-+			irq_set_affinity(pcfg->public_cfg.irq, cpumask_of(cpu));
-+	}
-+	return 0;
-+}
-+#endif /* CONFIG_HOTPLUG_CPU */
-+
-+/* Initialise the Bman driver. The meat of this function deals with portals. The
-+ * following describes the flow of portal-handling, the code "steps" refer to
-+ * this description;
-+ * 1. Portal configs are parsed from the device-tree into 'unused_pcfgs', with
-+ *    ::cpu==-1. Regions and interrupts are mapped (but interrupts are not
-+ *    bound).
-+ * 2. The "want_shared" and "want_unshared" lists (as filled by the
-+ *    "bportals=[...]" bootarg) are processed, allocating portals and assigning
-+ *    them to cpus, placing them in the relevant list and setting ::cpu as
-+ *    appropriate. If no "bportals" bootarg was present, the defaut is to try to
-+ *    assign portals to all online cpus at the time of driver initialisation.
-+ *    Any failure to allocate portals (when parsing the "want" lists or when
-+ *    using default behaviour) will be silently tolerated (the "fixup" logic in
-+ *    step 3 will determine what happens in this case).
-+ * 3. Do fixups relative to cpu_online_mask(). If no portals are marked for
-+ *    sharing and sharing is required (because not all cpus have been assigned
-+ *    portals), then one portal will marked for sharing. Conversely if no
-+ *    sharing is required, any portals marked for sharing will not be shared. It
-+ *    may be that sharing occurs when it wasn't expected, if portal allocation
-+ *    failed to honour all the requested assignments (including the default
-+ *    assignments if no bootarg is present).
-+ * 4. Unshared portals are initialised on their respective cpus.
-+ * 5. Shared portals are initialised on their respective cpus.
-+ * 6. Each remaining cpu is initialised to slave to one of the shared portals,
-+ *    which are selected in a round-robin fashion.
-+ * Any portal configs left unused are available for USDPAA allocation.
-+ */
-+__init int bman_init(void)
-+{
-+	struct cpumask slave_cpus;
-+	struct cpumask unshared_cpus = *cpu_none_mask;
-+	struct cpumask shared_cpus = *cpu_none_mask;
-+	LIST_HEAD(unshared_pcfgs);
-+	LIST_HEAD(shared_pcfgs);
-+	struct device_node *dn;
-+	struct bm_portal_config *pcfg;
-+	struct bman_portal *p;
-+	int cpu, ret;
-+	struct cpumask offline_cpus;
-+
-+	/* Initialise the Bman (CCSR) device */
-+	for_each_compatible_node(dn, NULL, "fsl,bman") {
-+		if (!bman_init_ccsr(dn))
-+			pr_info("Bman err interrupt handler present\n");
-+		else
-+			pr_err("Bman CCSR setup failed\n");
-+	}
-+	/* Initialise any declared buffer pools */
-+	for_each_compatible_node(dn, NULL, "fsl,bpool") {
-+		ret = fsl_bpool_init(dn);
-+		if (ret)
-+			return ret;
-+	}
-+	/* Step 1. See comments at the beginning of the file. */
-+	for_each_compatible_node(dn, NULL, "fsl,bman-portal") {
-+		if (!of_device_is_available(dn))
-+			continue;
-+		pcfg = parse_pcfg(dn);
-+		if (pcfg)
-+			list_add_tail(&pcfg->list, &unused_pcfgs);
-+	}
-+	/* Step 2. */
-+	for_each_possible_cpu(cpu) {
-+		if (cpumask_test_cpu(cpu, &want_shared)) {
-+			pcfg = get_pcfg(&unused_pcfgs);
-+			if (!pcfg)
-+				break;
-+			pcfg->public_cfg.cpu = cpu;
-+			list_add_tail(&pcfg->list, &shared_pcfgs);
-+			cpumask_set_cpu(cpu, &shared_cpus);
-+		}
-+		if (cpumask_test_cpu(cpu, &want_unshared)) {
-+			if (cpumask_test_cpu(cpu, &shared_cpus))
-+				continue;
-+			pcfg = get_pcfg(&unused_pcfgs);
-+			if (!pcfg)
-+				break;
-+			pcfg->public_cfg.cpu = cpu;
-+			list_add_tail(&pcfg->list, &unshared_pcfgs);
-+			cpumask_set_cpu(cpu, &unshared_cpus);
-+		}
-+	}
-+	if (list_empty(&shared_pcfgs) && list_empty(&unshared_pcfgs)) {
-+		/* Default, give an unshared portal to each online cpu */
-+		for_each_online_cpu(cpu) {
-+			pcfg = get_pcfg(&unused_pcfgs);
-+			if (!pcfg)
-+				break;
-+			pcfg->public_cfg.cpu = cpu;
-+			list_add_tail(&pcfg->list, &unshared_pcfgs);
-+			cpumask_set_cpu(cpu, &unshared_cpus);
-+		}
-+	}
-+	/* Step 3. */
-+	cpumask_andnot(&slave_cpus, cpu_possible_mask, &shared_cpus);
-+	cpumask_andnot(&slave_cpus, &slave_cpus, &unshared_cpus);
-+	if (cpumask_empty(&slave_cpus)) {
-+		/* No sharing required */
-+		if (!list_empty(&shared_pcfgs)) {
-+			/* Migrate "shared" to "unshared" */
-+			cpumask_or(&unshared_cpus, &unshared_cpus,
-+				   &shared_cpus);
-+			cpumask_clear(&shared_cpus);
-+			list_splice_tail(&shared_pcfgs, &unshared_pcfgs);
-+			INIT_LIST_HEAD(&shared_pcfgs);
-+		}
-+	} else {
-+		/* Sharing required */
-+		if (list_empty(&shared_pcfgs)) {
-+			/* Migrate one "unshared" to "shared" */
-+			pcfg = get_pcfg(&unshared_pcfgs);
-+			if (!pcfg) {
-+				pr_crit("No BMan portals available!\n");
-+				return 0;
-+			}
-+			cpumask_clear_cpu(pcfg->public_cfg.cpu, &unshared_cpus);
-+			cpumask_set_cpu(pcfg->public_cfg.cpu, &shared_cpus);
-+			list_add_tail(&pcfg->list, &shared_pcfgs);
-+		}
-+	}
-+	/* Step 4. */
-+	list_for_each_entry(pcfg, &unshared_pcfgs, list) {
-+		pcfg->public_cfg.is_shared = 0;
-+		p = init_pcfg(pcfg);
-+		if (!p) {
-+			pr_crit("Unable to initialize bman portal\n");
-+			return 0;
-+		}
-+	}
-+	/* Step 5. */
-+	list_for_each_entry(pcfg, &shared_pcfgs, list) {
-+		pcfg->public_cfg.is_shared = 1;
-+		p = init_pcfg(pcfg);
-+		if (p)
-+			shared_portals[num_shared_portals++] = p;
-+	}
-+	/* Step 6. */
-+	if (!cpumask_empty(&slave_cpus))
-+		for_each_cpu(cpu, &slave_cpus)
-+			init_slave(cpu);
-+	pr_info("Bman portals initialised\n");
-+	cpumask_andnot(&offline_cpus, cpu_possible_mask, cpu_online_mask);
-+	for_each_cpu(cpu, &offline_cpus)
-+		bman_offline_cpu(cpu);
-+#ifdef CONFIG_HOTPLUG_CPU
-+	ret = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
-+					"soc/qbman_portal:online",
-+					bman_online_cpu, bman_offline_cpu);
-+	if (ret < 0) {
-+		pr_err("bman: failed to register hotplug callbacks.\n");
-+		return 0;
-+	}
-+#endif
-+	return 0;
-+}
-+
-+__init int bman_resource_init(void)
-+{
-+	struct device_node *dn;
-+	int ret;
-+
-+	/* Initialise BPID allocation ranges */
-+	for_each_compatible_node(dn, NULL, "fsl,bpid-range") {
-+		ret = fsl_bpid_range_init(dn);
-+		if (ret)
-+			return ret;
-+	}
-+	return 0;
-+}
-+
-+#ifdef CONFIG_SUSPEND
-+void suspend_unused_bportal(void)
-+{
-+	struct bm_portal_config *pcfg;
-+
-+	if (list_empty(&unused_pcfgs))
-+		return;
-+
-+	list_for_each_entry(pcfg, &unused_pcfgs, list) {
-+#ifdef CONFIG_PM_DEBUG
-+		pr_info("Need to save bportal %d\n", pcfg->public_cfg.index);
-+#endif
-+		/* save isdr, disable all via isdr, clear isr */
-+		pcfg->saved_isdr =
-+			__raw_readl(pcfg->addr_virt[DPA_PORTAL_CI] + 0xe08);
-+		__raw_writel(0xffffffff, pcfg->addr_virt[DPA_PORTAL_CI] +
-+					0xe08);
-+		__raw_writel(0xffffffff, pcfg->addr_virt[DPA_PORTAL_CI] +
-+					0xe00);
-+	}
-+	return;
-+}
-+
-+void resume_unused_bportal(void)
-+{
-+	struct bm_portal_config *pcfg;
-+
-+	if (list_empty(&unused_pcfgs))
-+		return;
-+
-+	list_for_each_entry(pcfg, &unused_pcfgs, list) {
-+#ifdef CONFIG_PM_DEBUG
-+		pr_info("Need to resume bportal %d\n", pcfg->public_cfg.index);
-+#endif
-+		/* restore isdr */
-+		__raw_writel(pcfg->saved_isdr,
-+				pcfg->addr_virt[DPA_PORTAL_CI] + 0xe08);
-+	}
-+	return;
-+}
-+#endif
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/bman_high.c
-@@ -0,0 +1,1145 @@
-+/* Copyright 2008-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "bman_low.h"
-+
-+/* Compilation constants */
-+#define RCR_THRESH	2	/* reread h/w CI when running out of space */
-+#define IRQNAME		"BMan portal %d"
-+#define MAX_IRQNAME	16	/* big enough for "BMan portal %d" */
-+
-+struct bman_portal {
-+	struct bm_portal p;
-+	/* 2-element array. pools[0] is mask, pools[1] is snapshot. */
-+	struct bman_depletion *pools;
-+	int thresh_set;
-+	unsigned long irq_sources;
-+	u32 slowpoll;	/* only used when interrupts are off */
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	struct bman_pool *rcri_owned; /* only 1 release WAIT_SYNC at a time */
-+#endif
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	raw_spinlock_t sharing_lock; /* only used if is_shared */
-+	int is_shared;
-+	struct bman_portal *sharing_redirect;
-+#endif
-+	/* When the cpu-affine portal is activated, this is non-NULL */
-+	const struct bm_portal_config *config;
-+	/* This is needed for power management */
-+	struct platform_device *pdev;
-+	/* 64-entry hash-table of pool objects that are tracking depletion
-+	 * entry/exit (ie. BMAN_POOL_FLAG_DEPLETION). This isn't fast-path, so
-+	 * we're not fussy about cache-misses and so forth - whereas the above
-+	 * members should all fit in one cacheline.
-+	 * BTW, with 64 entries in the hash table and 64 buffer pools to track,
-+	 * you'll never guess the hash-function ... */
-+	struct bman_pool *cb[64];
-+	char irqname[MAX_IRQNAME];
-+	/* Track if the portal was alloced by the driver */
-+	u8 alloced;
-+	/* power management data */
-+	u32 save_isdr;
-+};
-+
-+/* For an explanation of the locking, redirection, or affine-portal logic,
-+ * please consult the Qman driver for details. This is the same, only simpler
-+ * (no fiddly Qman-specific bits.) */
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+#define PORTAL_IRQ_LOCK(p, irqflags) \
-+	do { \
-+		if ((p)->is_shared) \
-+			raw_spin_lock_irqsave(&(p)->sharing_lock, irqflags); \
-+		else \
-+			local_irq_save(irqflags); \
-+	} while (0)
-+#define PORTAL_IRQ_UNLOCK(p, irqflags) \
-+	do { \
-+		if ((p)->is_shared) \
-+			raw_spin_unlock_irqrestore(&(p)->sharing_lock, \
-+						   irqflags); \
-+		else \
-+			local_irq_restore(irqflags); \
-+	} while (0)
-+#else
-+#define PORTAL_IRQ_LOCK(p, irqflags) local_irq_save(irqflags)
-+#define PORTAL_IRQ_UNLOCK(p, irqflags) local_irq_restore(irqflags)
-+#endif
-+
-+static cpumask_t affine_mask;
-+static DEFINE_SPINLOCK(affine_mask_lock);
-+static DEFINE_PER_CPU(struct bman_portal, bman_affine_portal);
-+static inline struct bman_portal *get_raw_affine_portal(void)
-+{
-+	return &get_cpu_var(bman_affine_portal);
-+}
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+static inline struct bman_portal *get_affine_portal(void)
-+{
-+	struct bman_portal *p = get_raw_affine_portal();
-+	if (p->sharing_redirect)
-+		return p->sharing_redirect;
-+	return p;
-+}
-+#else
-+#define get_affine_portal() get_raw_affine_portal()
-+#endif
-+static inline void put_affine_portal(void)
-+{
-+	put_cpu_var(bman_affine_portal);
-+}
-+static inline struct bman_portal *get_poll_portal(void)
-+{
-+	return &get_cpu_var(bman_affine_portal);
-+}
-+#define put_poll_portal()
-+
-+/* GOTCHA: this object type refers to a pool, it isn't *the* pool. There may be
-+ * more than one such object per Bman buffer pool, eg. if different users of the
-+ * pool are operating via different portals. */
-+struct bman_pool {
-+	struct bman_pool_params params;
-+	/* Used for hash-table admin when using depletion notifications. */
-+	struct bman_portal *portal;
-+	struct bman_pool *next;
-+	/* stockpile state - NULL unless BMAN_POOL_FLAG_STOCKPILE is set */
-+	struct bm_buffer *sp;
-+	unsigned int sp_fill;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	atomic_t in_use;
-+#endif
-+};
-+
-+/* (De)Registration of depletion notification callbacks */
-+static void depletion_link(struct bman_portal *portal, struct bman_pool *pool)
-+{
-+	__maybe_unused unsigned long irqflags;
-+	pool->portal = portal;
-+	PORTAL_IRQ_LOCK(portal, irqflags);
-+	pool->next = portal->cb[pool->params.bpid];
-+	portal->cb[pool->params.bpid] = pool;
-+	if (!pool->next)
-+		/* First object for that bpid on this portal, enable the BSCN
-+		 * mask bit. */
-+		bm_isr_bscn_mask(&portal->p, pool->params.bpid, 1);
-+	PORTAL_IRQ_UNLOCK(portal, irqflags);
-+}
-+static void depletion_unlink(struct bman_pool *pool)
-+{
-+	struct bman_pool *it, *last = NULL;
-+	struct bman_pool **base = &pool->portal->cb[pool->params.bpid];
-+	__maybe_unused unsigned long irqflags;
-+	PORTAL_IRQ_LOCK(pool->portal, irqflags);
-+	it = *base;	/* <-- gotcha, don't do this prior to the irq_save */
-+	while (it != pool) {
-+		last = it;
-+		it = it->next;
-+	}
-+	if (!last)
-+		*base = pool->next;
-+	else
-+		last->next = pool->next;
-+	if (!last && !pool->next) {
-+		/* Last object for that bpid on this portal, disable the BSCN
-+		 * mask bit. */
-+		bm_isr_bscn_mask(&pool->portal->p, pool->params.bpid, 0);
-+		/* And "forget" that we last saw this pool as depleted */
-+		bman_depletion_unset(&pool->portal->pools[1],
-+					pool->params.bpid);
-+	}
-+	PORTAL_IRQ_UNLOCK(pool->portal, irqflags);
-+}
-+
-+/* In the case that the application's core loop calls qman_poll() and
-+ * bman_poll(), we ought to balance how often we incur the overheads of the
-+ * slow-path poll. We'll use two decrementer sources. The idle decrementer
-+ * constant is used when the last slow-poll detected no work to do, and the busy
-+ * decrementer constant when the last slow-poll had work to do. */
-+#define SLOW_POLL_IDLE 1000
-+#define SLOW_POLL_BUSY 10
-+static u32 __poll_portal_slow(struct bman_portal *p, u32 is);
-+
-+/* Portal interrupt handler */
-+static irqreturn_t portal_isr(__always_unused int irq, void *ptr)
-+{
-+	struct bman_portal *p = ptr;
-+	u32 clear = p->irq_sources;
-+	u32 is = bm_isr_status_read(&p->p) & p->irq_sources;
-+	clear |= __poll_portal_slow(p, is);
-+	bm_isr_status_clear(&p->p, clear);
-+	return IRQ_HANDLED;
-+}
-+
-+#ifdef CONFIG_SUSPEND
-+static int _bman_portal_suspend_noirq(struct device *dev)
-+{
-+	struct bman_portal *p = (struct bman_portal *)dev->platform_data;
-+#ifdef CONFIG_PM_DEBUG
-+	struct platform_device *pdev = to_platform_device(dev);
-+#endif
-+	p->save_isdr = bm_isr_disable_read(&p->p);
-+	bm_isr_disable_write(&p->p, 0xffffffff);
-+	bm_isr_status_clear(&p->p, 0xffffffff);
-+#ifdef CONFIG_PM_DEBUG
-+	pr_info("Suspend for %s\n", pdev->name);
-+#endif
-+	return 0;
-+}
-+
-+static int _bman_portal_resume_noirq(struct device *dev)
-+{
-+	struct bman_portal *p = (struct bman_portal *)dev->platform_data;
-+
-+	/* restore isdr */
-+	bm_isr_disable_write(&p->p, p->save_isdr);
-+	return 0;
-+}
-+#else
-+#define _bman_portal_suspend_noirq NULL
-+#define _bman_portal_resume_noirq NULL
-+#endif
-+
-+struct dev_pm_domain bman_portal_device_pm_domain = {
-+	.ops = {
-+		USE_PLATFORM_PM_SLEEP_OPS
-+		.suspend_noirq = _bman_portal_suspend_noirq,
-+		.resume_noirq = _bman_portal_resume_noirq,
-+	}
-+};
-+
-+struct bman_portal *bman_create_portal(
-+				       struct bman_portal *portal,
-+				       const struct bm_portal_config *config)
-+{
-+	struct bm_portal *__p;
-+	const struct bman_depletion *pools = &config->public_cfg.mask;
-+	int ret;
-+	u8 bpid = 0;
-+	char buf[16];
-+
-+	if (!portal) {
-+		portal = kmalloc(sizeof(*portal), GFP_KERNEL);
-+		if (!portal)
-+			return portal;
-+		portal->alloced = 1;
-+	} else
-+		portal->alloced = 0;
-+
-+	__p = &portal->p;
-+
-+	/* prep the low-level portal struct with the mapped addresses from the
-+	 * config, everything that follows depends on it and "config" is more
-+	 * for (de)reference... */
-+	__p->addr.addr_ce = config->addr_virt[DPA_PORTAL_CE];
-+	__p->addr.addr_ci = config->addr_virt[DPA_PORTAL_CI];
-+	if (bm_rcr_init(__p, bm_rcr_pvb, bm_rcr_cce)) {
-+		pr_err("Bman RCR initialisation failed\n");
-+		goto fail_rcr;
-+	}
-+	if (bm_mc_init(__p)) {
-+		pr_err("Bman MC initialisation failed\n");
-+		goto fail_mc;
-+	}
-+	if (bm_isr_init(__p)) {
-+		pr_err("Bman ISR initialisation failed\n");
-+		goto fail_isr;
-+	}
-+	portal->pools = kmalloc(2 * sizeof(*pools), GFP_KERNEL);
-+	if (!portal->pools)
-+		goto fail_pools;
-+	portal->pools[0] = *pools;
-+	bman_depletion_init(portal->pools + 1);
-+	while (bpid < bman_pool_max) {
-+		/* Default to all BPIDs disabled, we enable as required at
-+		 * run-time. */
-+		bm_isr_bscn_mask(__p, bpid, 0);
-+		bpid++;
-+	}
-+	portal->slowpoll = 0;
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	portal->rcri_owned = NULL;
-+#endif
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	raw_spin_lock_init(&portal->sharing_lock);
-+	portal->is_shared = config->public_cfg.is_shared;
-+	portal->sharing_redirect = NULL;
-+#endif
-+	sprintf(buf, "bportal-%u", config->public_cfg.index);
-+	portal->pdev = platform_device_alloc(buf, -1);
-+	if (!portal->pdev)
-+		goto fail_devalloc;
-+	portal->pdev->dev.pm_domain = &bman_portal_device_pm_domain;
-+	portal->pdev->dev.platform_data = portal;
-+	ret = platform_device_add(portal->pdev);
-+	if (ret)
-+		goto fail_devadd;
-+	memset(&portal->cb, 0, sizeof(portal->cb));
-+	/* Write-to-clear any stale interrupt status bits */
-+	bm_isr_disable_write(__p, 0xffffffff);
-+	portal->irq_sources = 0;
-+	bm_isr_enable_write(__p, portal->irq_sources);
-+	bm_isr_status_clear(__p, 0xffffffff);
-+	snprintf(portal->irqname, MAX_IRQNAME, IRQNAME, config->public_cfg.cpu);
-+	if (request_irq(config->public_cfg.irq, portal_isr, 0, portal->irqname,
-+			portal)) {
-+		pr_err("request_irq() failed\n");
-+		goto fail_irq;
-+	}
-+	if ((config->public_cfg.cpu != -1) &&
-+			irq_can_set_affinity(config->public_cfg.irq) &&
-+			irq_set_affinity(config->public_cfg.irq,
-+				cpumask_of(config->public_cfg.cpu))) {
-+		pr_err("irq_set_affinity() failed %s\n", portal->irqname);
-+		goto fail_affinity;
-+	}
-+
-+	/* Need RCR to be empty before continuing */
-+	ret = bm_rcr_get_fill(__p);
-+	if (ret) {
-+		pr_err("Bman RCR unclean\n");
-+		goto fail_rcr_empty;
-+	}
-+	/* Success */
-+	portal->config = config;
-+
-+	bm_isr_disable_write(__p, 0);
-+	bm_isr_uninhibit(__p);
-+	return portal;
-+fail_rcr_empty:
-+fail_affinity:
-+	free_irq(config->public_cfg.irq, portal);
-+fail_irq:
-+	platform_device_del(portal->pdev);
-+fail_devadd:
-+	platform_device_put(portal->pdev);
-+fail_devalloc:
-+	kfree(portal->pools);
-+fail_pools:
-+	bm_isr_finish(__p);
-+fail_isr:
-+	bm_mc_finish(__p);
-+fail_mc:
-+	bm_rcr_finish(__p);
-+fail_rcr:
-+	if (portal->alloced)
-+		kfree(portal);
-+	return NULL;
-+}
-+
-+struct bman_portal *bman_create_affine_portal(
-+			const struct bm_portal_config *config)
-+{
-+	struct bman_portal *portal;
-+
-+	portal = &per_cpu(bman_affine_portal, config->public_cfg.cpu);
-+	portal = bman_create_portal(portal, config);
-+	if (portal) {
-+		spin_lock(&affine_mask_lock);
-+		cpumask_set_cpu(config->public_cfg.cpu, &affine_mask);
-+		spin_unlock(&affine_mask_lock);
-+	}
-+	return portal;
-+}
-+
-+
-+struct bman_portal *bman_create_affine_slave(struct bman_portal *redirect,
-+								int cpu)
-+{
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	struct bman_portal *p;
-+	p = &per_cpu(bman_affine_portal, cpu);
-+	BUG_ON(p->config);
-+	BUG_ON(p->is_shared);
-+	BUG_ON(!redirect->config->public_cfg.is_shared);
-+	p->irq_sources = 0;
-+	p->sharing_redirect = redirect;
-+	return p;
-+#else
-+	BUG();
-+	return NULL;
-+#endif
-+}
-+
-+void bman_destroy_portal(struct bman_portal *bm)
-+{
-+	const struct bm_portal_config *pcfg;
-+	pcfg = bm->config;
-+	bm_rcr_cce_update(&bm->p);
-+	bm_rcr_cce_update(&bm->p);
-+
-+	free_irq(pcfg->public_cfg.irq, bm);
-+
-+	kfree(bm->pools);
-+	bm_isr_finish(&bm->p);
-+	bm_mc_finish(&bm->p);
-+	bm_rcr_finish(&bm->p);
-+	bm->config = NULL;
-+	if (bm->alloced)
-+		kfree(bm);
-+}
-+
-+const struct bm_portal_config *bman_destroy_affine_portal(void)
-+{
-+	struct bman_portal *bm = get_raw_affine_portal();
-+	const struct bm_portal_config *pcfg;
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	if (bm->sharing_redirect) {
-+		bm->sharing_redirect = NULL;
-+		put_affine_portal();
-+		return NULL;
-+	}
-+	bm->is_shared = 0;
-+#endif
-+	pcfg = bm->config;
-+	bman_destroy_portal(bm);
-+	spin_lock(&affine_mask_lock);
-+	cpumask_clear_cpu(pcfg->public_cfg.cpu, &affine_mask);
-+	spin_unlock(&affine_mask_lock);
-+	put_affine_portal();
-+	return pcfg;
-+}
-+
-+/* When release logic waits on available RCR space, we need a global waitqueue
-+ * in the case of "affine" use (as the waits wake on different cpus which means
-+ * different portals - so we can't wait on any per-portal waitqueue). */
-+static DECLARE_WAIT_QUEUE_HEAD(affine_queue);
-+
-+static u32 __poll_portal_slow(struct bman_portal *p, u32 is)
-+{
-+	struct bman_depletion tmp;
-+	u32 ret = is;
-+
-+	/* There is a gotcha to be aware of. If we do the query before clearing
-+	 * the status register, we may miss state changes that occur between the
-+	 * two. If we write to clear the status register before the query, the
-+	 * cache-enabled query command may overtake the status register write
-+	 * unless we use a heavyweight sync (which we don't want). Instead, we
-+	 * write-to-clear the status register then *read it back* before doing
-+	 * the query, hence the odd while loop with the 'is' accumulation. */
-+	if (is & BM_PIRQ_BSCN) {
-+		struct bm_mc_result *mcr;
-+		__maybe_unused unsigned long irqflags;
-+		unsigned int i, j;
-+		u32 __is;
-+		bm_isr_status_clear(&p->p, BM_PIRQ_BSCN);
-+		while ((__is = bm_isr_status_read(&p->p)) & BM_PIRQ_BSCN) {
-+			is |= __is;
-+			bm_isr_status_clear(&p->p, BM_PIRQ_BSCN);
-+		}
-+		is &= ~BM_PIRQ_BSCN;
-+		PORTAL_IRQ_LOCK(p, irqflags);
-+		bm_mc_start(&p->p);
-+		bm_mc_commit(&p->p, BM_MCC_VERB_CMD_QUERY);
-+		while (!(mcr = bm_mc_result(&p->p)))
-+			cpu_relax();
-+		tmp = mcr->query.ds.state;
-+		tmp.__state[0] = be32_to_cpu(tmp.__state[0]);
-+		tmp.__state[1] = be32_to_cpu(tmp.__state[1]);
-+		PORTAL_IRQ_UNLOCK(p, irqflags);
-+		for (i = 0; i < 2; i++) {
-+			int idx = i * 32;
-+			/* tmp is a mask of currently-depleted pools.
-+			 * pools[0] is mask of those we care about.
-+			 * pools[1] is our previous view (we only want to
-+			 * be told about changes). */
-+			tmp.__state[i] &= p->pools[0].__state[i];
-+			if (tmp.__state[i] == p->pools[1].__state[i])
-+				/* fast-path, nothing to see, move along */
-+				continue;
-+			for (j = 0; j <= 31; j++, idx++) {
-+				struct bman_pool *pool = p->cb[idx];
-+				int b4 = bman_depletion_get(&p->pools[1], idx);
-+				int af = bman_depletion_get(&tmp, idx);
-+				if (b4 == af)
-+					continue;
-+				while (pool) {
-+					pool->params.cb(p, pool,
-+						pool->params.cb_ctx, af);
-+					pool = pool->next;
-+				}
-+			}
-+		}
-+		p->pools[1] = tmp;
-+	}
-+
-+	if (is & BM_PIRQ_RCRI) {
-+		__maybe_unused unsigned long irqflags;
-+		PORTAL_IRQ_LOCK(p, irqflags);
-+		bm_rcr_cce_update(&p->p);
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+		/* If waiting for sync, we only cancel the interrupt threshold
-+		 * when the ring utilisation hits zero. */
-+		if (p->rcri_owned) {
-+			if (!bm_rcr_get_fill(&p->p)) {
-+				p->rcri_owned = NULL;
-+				bm_rcr_set_ithresh(&p->p, 0);
-+			}
-+		} else
-+#endif
-+		bm_rcr_set_ithresh(&p->p, 0);
-+		PORTAL_IRQ_UNLOCK(p, irqflags);
-+		wake_up(&affine_queue);
-+		bm_isr_status_clear(&p->p, BM_PIRQ_RCRI);
-+		is &= ~BM_PIRQ_RCRI;
-+	}
-+
-+	/* There should be no status register bits left undefined */
-+	DPA_ASSERT(!is);
-+	return ret;
-+}
-+
-+const struct bman_portal_config *bman_get_portal_config(void)
-+{
-+	struct bman_portal *p = get_affine_portal();
-+	const struct bman_portal_config *ret = &p->config->public_cfg;
-+	put_affine_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(bman_get_portal_config);
-+
-+u32 bman_irqsource_get(void)
-+{
-+	struct bman_portal *p = get_raw_affine_portal();
-+	u32 ret = p->irq_sources & BM_PIRQ_VISIBLE;
-+	put_affine_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(bman_irqsource_get);
-+
-+int bman_p_irqsource_add(struct bman_portal *p, __maybe_unused u32 bits)
-+{
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	if (p->sharing_redirect)
-+		return -EINVAL;
-+	else
-+#endif
-+	{
-+		__maybe_unused unsigned long irqflags;
-+		PORTAL_IRQ_LOCK(p, irqflags);
-+		set_bits(bits & BM_PIRQ_VISIBLE, &p->irq_sources);
-+		bm_isr_enable_write(&p->p, p->irq_sources);
-+		PORTAL_IRQ_UNLOCK(p, irqflags);
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(bman_p_irqsource_add);
-+
-+int bman_irqsource_add(__maybe_unused u32 bits)
-+{
-+	struct bman_portal *p = get_raw_affine_portal();
-+	int ret = 0;
-+	ret = bman_p_irqsource_add(p, bits);
-+	put_affine_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(bman_irqsource_add);
-+
-+int bman_irqsource_remove(u32 bits)
-+{
-+	struct bman_portal *p = get_raw_affine_portal();
-+	__maybe_unused unsigned long irqflags;
-+	u32 ier;
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	if (p->sharing_redirect) {
-+		put_affine_portal();
-+		return -EINVAL;
-+	}
-+#endif
-+	/* Our interrupt handler only processes+clears status register bits that
-+	 * are in p->irq_sources. As we're trimming that mask, if one of them
-+	 * were to assert in the status register just before we remove it from
-+	 * the enable register, there would be an interrupt-storm when we
-+	 * release the IRQ lock. So we wait for the enable register update to
-+	 * take effect in h/w (by reading it back) and then clear all other bits
-+	 * in the status register. Ie. we clear them from ISR once it's certain
-+	 * IER won't allow them to reassert. */
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	bits &= BM_PIRQ_VISIBLE;
-+	clear_bits(bits, &p->irq_sources);
-+	bm_isr_enable_write(&p->p, p->irq_sources);
-+	ier = bm_isr_enable_read(&p->p);
-+	/* Using "~ier" (rather than "bits" or "~p->irq_sources") creates a
-+	 * data-dependency, ie. to protect against re-ordering. */
-+	bm_isr_status_clear(&p->p, ~ier);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	return 0;
-+}
-+EXPORT_SYMBOL(bman_irqsource_remove);
-+
-+const cpumask_t *bman_affine_cpus(void)
-+{
-+	return &affine_mask;
-+}
-+EXPORT_SYMBOL(bman_affine_cpus);
-+
-+u32 bman_poll_slow(void)
-+{
-+	struct bman_portal *p = get_poll_portal();
-+	u32 ret;
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	if (unlikely(p->sharing_redirect))
-+		ret = (u32)-1;
-+	else
-+#endif
-+	{
-+		u32 is = bm_isr_status_read(&p->p) & ~p->irq_sources;
-+		ret = __poll_portal_slow(p, is);
-+		bm_isr_status_clear(&p->p, ret);
-+	}
-+	put_poll_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(bman_poll_slow);
-+
-+/* Legacy wrapper */
-+void bman_poll(void)
-+{
-+	struct bman_portal *p = get_poll_portal();
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	if (unlikely(p->sharing_redirect))
-+		goto done;
-+#endif
-+	if (!(p->slowpoll--)) {
-+		u32 is = bm_isr_status_read(&p->p) & ~p->irq_sources;
-+		u32 active = __poll_portal_slow(p, is);
-+		if (active)
-+			p->slowpoll = SLOW_POLL_BUSY;
-+		else
-+			p->slowpoll = SLOW_POLL_IDLE;
-+	}
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+done:
-+#endif
-+	put_poll_portal();
-+}
-+EXPORT_SYMBOL(bman_poll);
-+
-+static const u32 zero_thresholds[4] = {0, 0, 0, 0};
-+
-+struct bman_pool *bman_new_pool(const struct bman_pool_params *params)
-+{
-+	struct bman_pool *pool = NULL;
-+	u32 bpid;
-+
-+	if (params->flags & BMAN_POOL_FLAG_DYNAMIC_BPID) {
-+		int ret = bman_alloc_bpid(&bpid);
-+		if (ret)
-+			return NULL;
-+	} else {
-+		if (params->bpid >= bman_pool_max)
-+			return NULL;
-+		bpid = params->bpid;
-+	}
-+#ifdef CONFIG_FSL_BMAN_CONFIG
-+	if (params->flags & BMAN_POOL_FLAG_THRESH) {
-+		int ret = bm_pool_set(bpid, params->thresholds);
-+		if (ret)
-+			goto err;
-+	}
-+#else
-+	if (params->flags & BMAN_POOL_FLAG_THRESH)
-+		goto err;
-+#endif
-+	pool = kmalloc(sizeof(*pool), GFP_KERNEL);
-+	if (!pool)
-+		goto err;
-+	pool->sp = NULL;
-+	pool->sp_fill = 0;
-+	pool->params = *params;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	atomic_set(&pool->in_use, 1);
-+#endif
-+	if (params->flags & BMAN_POOL_FLAG_DYNAMIC_BPID)
-+		pool->params.bpid = bpid;
-+	if (params->flags & BMAN_POOL_FLAG_STOCKPILE) {
-+		pool->sp = kmalloc(sizeof(struct bm_buffer) * BMAN_STOCKPILE_SZ,
-+					GFP_KERNEL);
-+		if (!pool->sp)
-+			goto err;
-+	}
-+	if (pool->params.flags & BMAN_POOL_FLAG_DEPLETION) {
-+		struct bman_portal *p = get_affine_portal();
-+		if (!p->pools || !bman_depletion_get(&p->pools[0], bpid)) {
-+			pr_err("Depletion events disabled for bpid %d\n", bpid);
-+			goto err;
-+		}
-+		depletion_link(p, pool);
-+		put_affine_portal();
-+	}
-+	return pool;
-+err:
-+#ifdef CONFIG_FSL_BMAN_CONFIG
-+	if (params->flags & BMAN_POOL_FLAG_THRESH)
-+		bm_pool_set(bpid, zero_thresholds);
-+#endif
-+	if (params->flags & BMAN_POOL_FLAG_DYNAMIC_BPID)
-+		bman_release_bpid(bpid);
-+	if (pool) {
-+		kfree(pool->sp);
-+		kfree(pool);
-+	}
-+	return NULL;
-+}
-+EXPORT_SYMBOL(bman_new_pool);
-+
-+void bman_free_pool(struct bman_pool *pool)
-+{
-+#ifdef CONFIG_FSL_BMAN_CONFIG
-+	if (pool->params.flags & BMAN_POOL_FLAG_THRESH)
-+		bm_pool_set(pool->params.bpid, zero_thresholds);
-+#endif
-+	if (pool->params.flags & BMAN_POOL_FLAG_DEPLETION)
-+		depletion_unlink(pool);
-+	if (pool->params.flags & BMAN_POOL_FLAG_STOCKPILE) {
-+		if (pool->sp_fill)
-+			pr_err("Stockpile not flushed, has %u in bpid %u.\n",
-+				pool->sp_fill, pool->params.bpid);
-+		kfree(pool->sp);
-+		pool->sp = NULL;
-+		pool->params.flags ^= BMAN_POOL_FLAG_STOCKPILE;
-+	}
-+	if (pool->params.flags & BMAN_POOL_FLAG_DYNAMIC_BPID)
-+		bman_release_bpid(pool->params.bpid);
-+	kfree(pool);
-+}
-+EXPORT_SYMBOL(bman_free_pool);
-+
-+const struct bman_pool_params *bman_get_params(const struct bman_pool *pool)
-+{
-+	return &pool->params;
-+}
-+EXPORT_SYMBOL(bman_get_params);
-+
-+static noinline void update_rcr_ci(struct bman_portal *p, u8 avail)
-+{
-+	if (avail)
-+		bm_rcr_cce_prefetch(&p->p);
-+	else
-+		bm_rcr_cce_update(&p->p);
-+}
-+
-+int bman_rcr_is_empty(void)
-+{
-+	__maybe_unused unsigned long irqflags;
-+	struct bman_portal *p = get_affine_portal();
-+	u8 avail;
-+
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	update_rcr_ci(p, 0);
-+	avail = bm_rcr_get_fill(&p->p);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	return avail == 0;
-+}
-+EXPORT_SYMBOL(bman_rcr_is_empty);
-+
-+static inline struct bm_rcr_entry *try_rel_start(struct bman_portal **p,
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+					__maybe_unused struct bman_pool *pool,
-+#endif
-+					__maybe_unused unsigned long *irqflags,
-+					__maybe_unused u32 flags)
-+{
-+	struct bm_rcr_entry *r;
-+	u8 avail;
-+
-+	*p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(*p, (*irqflags));
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	if (unlikely((flags & BMAN_RELEASE_FLAG_WAIT) &&
-+			(flags & BMAN_RELEASE_FLAG_WAIT_SYNC))) {
-+		if ((*p)->rcri_owned) {
-+			PORTAL_IRQ_UNLOCK(*p, (*irqflags));
-+			put_affine_portal();
-+			return NULL;
-+		}
-+		(*p)->rcri_owned = pool;
-+	}
-+#endif
-+	avail = bm_rcr_get_avail(&(*p)->p);
-+	if (avail < 2)
-+		update_rcr_ci(*p, avail);
-+	r = bm_rcr_start(&(*p)->p);
-+	if (unlikely(!r)) {
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+		if (unlikely((flags & BMAN_RELEASE_FLAG_WAIT) &&
-+				(flags & BMAN_RELEASE_FLAG_WAIT_SYNC)))
-+			(*p)->rcri_owned = NULL;
-+#endif
-+		PORTAL_IRQ_UNLOCK(*p, (*irqflags));
-+		put_affine_portal();
-+	}
-+	return r;
-+}
-+
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+static noinline struct bm_rcr_entry *__wait_rel_start(struct bman_portal **p,
-+					struct bman_pool *pool,
-+					__maybe_unused unsigned long *irqflags,
-+					u32 flags)
-+{
-+	struct bm_rcr_entry *rcr = try_rel_start(p, pool, irqflags, flags);
-+	if (!rcr)
-+		bm_rcr_set_ithresh(&(*p)->p, 1);
-+	return rcr;
-+}
-+
-+static noinline struct bm_rcr_entry *wait_rel_start(struct bman_portal **p,
-+					struct bman_pool *pool,
-+					__maybe_unused unsigned long *irqflags,
-+					u32 flags)
-+{
-+	struct bm_rcr_entry *rcr;
-+#ifndef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	pool = NULL;
-+#endif
-+	if (flags & BMAN_RELEASE_FLAG_WAIT_INT)
-+		/* NB: return NULL if signal occurs before completion. Signal
-+		 * can occur during return. Caller must check for signal */
-+		wait_event_interruptible(affine_queue,
-+			(rcr = __wait_rel_start(p, pool, irqflags, flags)));
-+	else
-+		wait_event(affine_queue,
-+			(rcr = __wait_rel_start(p, pool, irqflags, flags)));
-+	return rcr;
-+}
-+#endif
-+
-+static inline int __bman_release(struct bman_pool *pool,
-+			const struct bm_buffer *bufs, u8 num, u32 flags)
-+{
-+	struct bman_portal *p;
-+	struct bm_rcr_entry *r;
-+	__maybe_unused unsigned long irqflags;
-+	u32 i = num - 1;
-+
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+	if (flags & BMAN_RELEASE_FLAG_WAIT)
-+		r = wait_rel_start(&p, pool, &irqflags, flags);
-+	else
-+		r = try_rel_start(&p, pool, &irqflags, flags);
-+#else
-+	r = try_rel_start(&p, &irqflags, flags);
-+#endif
-+	if (!r)
-+		return -EBUSY;
-+	/* We can copy all but the first entry, as this can trigger badness
-+	 * with the valid-bit. Use the overlay to mask the verb byte. */
-+	r->bufs[0].opaque =
-+		((cpu_to_be64((bufs[0].opaque |
-+			      ((u64)pool->params.bpid<<48))
-+			      & 0x00ffffffffffffff)));
-+	if (i) {
-+		for (i = 1; i < num; i++)
-+			r->bufs[i].opaque =
-+				cpu_to_be64(bufs[i].opaque);
-+	}
-+
-+	bm_rcr_pvb_commit(&p->p, BM_RCR_VERB_CMD_BPID_SINGLE |
-+			(num & BM_RCR_VERB_BUFCOUNT_MASK));
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	/* if we wish to sync we need to set the threshold after h/w sees the
-+	 * new ring entry. As we're mixing cache-enabled and cache-inhibited
-+	 * accesses, this requires a heavy-weight sync. */
-+	if (unlikely((flags & BMAN_RELEASE_FLAG_WAIT) &&
-+			(flags & BMAN_RELEASE_FLAG_WAIT_SYNC))) {
-+		hwsync();
-+		bm_rcr_set_ithresh(&p->p, 1);
-+	}
-+#endif
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	if (unlikely((flags & BMAN_RELEASE_FLAG_WAIT) &&
-+			(flags & BMAN_RELEASE_FLAG_WAIT_SYNC))) {
-+		if (flags & BMAN_RELEASE_FLAG_WAIT_INT)
-+			/* NB: return success even if signal occurs before
-+			 * condition is true. pvb_commit guarantees success */
-+			wait_event_interruptible(affine_queue,
-+					(p->rcri_owned != pool));
-+		else
-+			wait_event(affine_queue, (p->rcri_owned != pool));
-+	}
-+#endif
-+	return 0;
-+}
-+
-+int bman_release(struct bman_pool *pool, const struct bm_buffer *bufs, u8 num,
-+			u32 flags)
-+{
-+	int ret;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	if (!num || (num > 8))
-+		return -EINVAL;
-+	if (pool->params.flags & BMAN_POOL_FLAG_NO_RELEASE)
-+		return -EINVAL;
-+#endif
-+	/* Without stockpile, this API is a pass-through to the h/w operation */
-+	if (!(pool->params.flags & BMAN_POOL_FLAG_STOCKPILE))
-+		return __bman_release(pool, bufs, num, flags);
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	if (!atomic_dec_and_test(&pool->in_use)) {
-+		pr_crit("Parallel attempts to enter bman_released() detected.");
-+		panic("only one instance of bman_released/acquired allowed");
-+	}
-+#endif
-+	/* Two movements of buffers are possible, and can occur in either order.
-+	 * A: moving buffers from the caller to the stockpile.
-+	 * B: moving buffers from the stockpile to hardware.
-+	 * Order 1: if there is already enough space in the stockpile for A
-+	 * then we want to do A first, and only do B if we trigger the
-+	 * stockpile-high threshold.
-+	 * Order 2: if there is not enough space in the stockpile for A, then
-+	 * we want to do B first, then do A if B had succeeded. However in this
-+	 * case B is dependent on how many buffers the user needs to release,
-+	 * not the stockpile-high threshold.
-+	 * Due to the different handling of B between the two cases, putting A
-+	 * and B in a while() loop would require quite obscure logic, so handle
-+	 * the different sequences explicitly. */
-+	if ((pool->sp_fill + num) <= BMAN_STOCKPILE_SZ) {
-+		/* Order 1: do A */
-+		copy_words(pool->sp + pool->sp_fill, bufs,
-+			   sizeof(struct bm_buffer) * num);
-+		pool->sp_fill += num;
-+		/* do B relative to STOCKPILE_HIGH */
-+		while (pool->sp_fill >= BMAN_STOCKPILE_HIGH) {
-+			ret = __bman_release(pool,
-+					     pool->sp + (pool->sp_fill - 8), 8,
-+					     flags);
-+			if (ret >= 0)
-+				pool->sp_fill -= 8;
-+		}
-+	} else {
-+		/* Order 2: do B relative to 'num' */
-+		do {
-+			ret = __bman_release(pool,
-+					     pool->sp + (pool->sp_fill - 8), 8,
-+					     flags);
-+			if (ret < 0)
-+				/* failure */
-+				goto release_done;
-+			pool->sp_fill -= 8;
-+		} while ((pool->sp_fill + num) > BMAN_STOCKPILE_SZ);
-+		/* do A */
-+		copy_words(pool->sp + pool->sp_fill, bufs,
-+			   sizeof(struct bm_buffer) * num);
-+		pool->sp_fill += num;
-+	}
-+	/* success */
-+	ret = 0;
-+release_done:
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	atomic_inc(&pool->in_use);
-+#endif
-+	return ret;
-+}
-+EXPORT_SYMBOL(bman_release);
-+
-+static inline int __bman_acquire(struct bman_pool *pool, struct bm_buffer *bufs,
-+					u8 num)
-+{
-+	struct bman_portal *p = get_affine_portal();
-+	struct bm_mc_command *mcc;
-+	struct bm_mc_result *mcr;
-+	__maybe_unused unsigned long irqflags;
-+	int ret, i;
-+
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	mcc = bm_mc_start(&p->p);
-+	mcc->acquire.bpid = pool->params.bpid;
-+	bm_mc_commit(&p->p, BM_MCC_VERB_CMD_ACQUIRE |
-+			(num & BM_MCC_VERB_ACQUIRE_BUFCOUNT));
-+	while (!(mcr = bm_mc_result(&p->p)))
-+		cpu_relax();
-+	ret = mcr->verb & BM_MCR_VERB_ACQUIRE_BUFCOUNT;
-+	if (bufs) {
-+		for (i = 0; i < num; i++)
-+			bufs[i].opaque =
-+				be64_to_cpu(mcr->acquire.bufs[i].opaque);
-+	}
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	if (ret != num)
-+		ret = -ENOMEM;
-+	return ret;
-+}
-+
-+int bman_acquire(struct bman_pool *pool, struct bm_buffer *bufs, u8 num,
-+			u32 flags)
-+{
-+	int ret;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	if (!num || (num > 8))
-+		return -EINVAL;
-+	if (pool->params.flags & BMAN_POOL_FLAG_ONLY_RELEASE)
-+		return -EINVAL;
-+#endif
-+	/* Without stockpile, this API is a pass-through to the h/w operation */
-+	if (!(pool->params.flags & BMAN_POOL_FLAG_STOCKPILE))
-+		return __bman_acquire(pool, bufs, num);
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	if (!atomic_dec_and_test(&pool->in_use)) {
-+		pr_crit("Parallel attempts to enter bman_acquire() detected.");
-+		panic("only one instance of bman_released/acquired allowed");
-+	}
-+#endif
-+	/* Two movements of buffers are possible, and can occur in either order.
-+	 * A: moving buffers from stockpile to the caller.
-+	 * B: moving buffers from hardware to the stockpile.
-+	 * Order 1: if there are already enough buffers in the stockpile for A
-+	 * then we want to do A first, and only do B if we trigger the
-+	 * stockpile-low threshold.
-+	 * Order 2: if there are not enough buffers in the stockpile for A,
-+	 * then we want to do B first, then do A if B had succeeded. However in
-+	 * this case B is dependent on how many buffers the user needs, not the
-+	 * stockpile-low threshold.
-+	 * Due to the different handling of B between the two cases, putting A
-+	 * and B in a while() loop would require quite obscure logic, so handle
-+	 * the different sequences explicitly. */
-+	if (num <= pool->sp_fill) {
-+		/* Order 1: do A */
-+		copy_words(bufs, pool->sp + (pool->sp_fill - num),
-+			   sizeof(struct bm_buffer) * num);
-+		pool->sp_fill -= num;
-+		/* do B relative to STOCKPILE_LOW */
-+		while (pool->sp_fill <= BMAN_STOCKPILE_LOW) {
-+			ret = __bman_acquire(pool, pool->sp + pool->sp_fill, 8);
-+			if (ret < 0)
-+				ret = __bman_acquire(pool,
-+						pool->sp + pool->sp_fill, 1);
-+			if (ret < 0)
-+				break;
-+			pool->sp_fill += ret;
-+		}
-+	} else {
-+		/* Order 2: do B relative to 'num' */
-+		do {
-+			ret = __bman_acquire(pool, pool->sp + pool->sp_fill, 8);
-+			if (ret < 0)
-+				ret = __bman_acquire(pool,
-+						pool->sp + pool->sp_fill, 1);
-+			if (ret < 0)
-+				/* failure */
-+				goto acquire_done;
-+			pool->sp_fill += ret;
-+		} while (pool->sp_fill < num);
-+		/* do A */
-+		copy_words(bufs, pool->sp + (pool->sp_fill - num),
-+			   sizeof(struct bm_buffer) * num);
-+		pool->sp_fill -= num;
-+	}
-+	/* success */
-+	ret = num;
-+acquire_done:
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	atomic_inc(&pool->in_use);
-+#endif
-+	return ret;
-+}
-+EXPORT_SYMBOL(bman_acquire);
-+
-+int bman_flush_stockpile(struct bman_pool *pool, u32 flags)
-+{
-+	u8 num;
-+	int ret;
-+
-+	while (pool->sp_fill) {
-+		num = ((pool->sp_fill > 8) ? 8 : pool->sp_fill);
-+		ret = __bman_release(pool, pool->sp + (pool->sp_fill - num),
-+				     num, flags);
-+		if (ret)
-+			return ret;
-+		pool->sp_fill -= num;
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(bman_flush_stockpile);
-+
-+int bman_query_pools(struct bm_pool_state *state)
-+{
-+	struct bman_portal *p = get_affine_portal();
-+	struct bm_mc_result *mcr;
-+	__maybe_unused unsigned long irqflags;
-+
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	bm_mc_start(&p->p);
-+	bm_mc_commit(&p->p, BM_MCC_VERB_CMD_QUERY);
-+	while (!(mcr = bm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & BM_MCR_VERB_CMD_MASK) == BM_MCR_VERB_CMD_QUERY);
-+	*state = mcr->query;
-+	state->as.state.__state[0] = be32_to_cpu(state->as.state.__state[0]);
-+	state->as.state.__state[1] = be32_to_cpu(state->as.state.__state[1]);
-+	state->ds.state.__state[0] = be32_to_cpu(state->ds.state.__state[0]);
-+	state->ds.state.__state[1] = be32_to_cpu(state->ds.state.__state[1]);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	return 0;
-+}
-+EXPORT_SYMBOL(bman_query_pools);
-+
-+#ifdef CONFIG_FSL_BMAN_CONFIG
-+u32 bman_query_free_buffers(struct bman_pool *pool)
-+{
-+	return bm_pool_free_buffers(pool->params.bpid);
-+}
-+EXPORT_SYMBOL(bman_query_free_buffers);
-+
-+int bman_update_pool_thresholds(struct bman_pool *pool, const u32 *thresholds)
-+{
-+	u32 bpid;
-+
-+	bpid = bman_get_params(pool)->bpid;
-+
-+	return bm_pool_set(bpid, thresholds);
-+}
-+EXPORT_SYMBOL(bman_update_pool_thresholds);
-+#endif
-+
-+int bman_shutdown_pool(u32 bpid)
-+{
-+	struct bman_portal *p = get_affine_portal();
-+	__maybe_unused unsigned long irqflags;
-+	int ret;
-+
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	ret = bm_shutdown_pool(&p->p, bpid);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(bman_shutdown_pool);
-+
-+const struct bm_portal_config *bman_get_bm_portal_config(
-+						struct bman_portal *portal)
-+{
-+	return portal->sharing_redirect ? NULL : portal->config;
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/bman_low.h
-@@ -0,0 +1,565 @@
-+/* Copyright 2008-2011 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "bman_private.h"
-+
-+/***************************/
-+/* Portal register assists */
-+/***************************/
-+
-+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64)
-+
-+/* Cache-inhibited register offsets */
-+#define BM_REG_RCR_PI_CINH	0x0000
-+#define BM_REG_RCR_CI_CINH	0x0004
-+#define BM_REG_RCR_ITR		0x0008
-+#define BM_REG_CFG		0x0100
-+#define BM_REG_SCN(n)		(0x0200 + ((n) << 2))
-+#define BM_REG_ISR		0x0e00
-+#define BM_REG_IIR              0x0e0c
-+
-+/* Cache-enabled register offsets */
-+#define BM_CL_CR		0x0000
-+#define BM_CL_RR0		0x0100
-+#define BM_CL_RR1		0x0140
-+#define BM_CL_RCR		0x1000
-+#define BM_CL_RCR_PI_CENA	0x3000
-+#define BM_CL_RCR_CI_CENA	0x3100
-+
-+#endif
-+
-+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+
-+/* Cache-inhibited register offsets */
-+#define BM_REG_RCR_PI_CINH	0x3000
-+#define BM_REG_RCR_CI_CINH	0x3100
-+#define BM_REG_RCR_ITR		0x3200
-+#define BM_REG_CFG		0x3300
-+#define BM_REG_SCN(n)		(0x3400 + ((n) << 6))
-+#define BM_REG_ISR		0x3e00
-+#define BM_REG_IIR              0x3ec0
-+
-+/* Cache-enabled register offsets */
-+#define BM_CL_CR		0x0000
-+#define BM_CL_RR0		0x0100
-+#define BM_CL_RR1		0x0140
-+#define BM_CL_RCR		0x1000
-+#define BM_CL_RCR_PI_CENA	0x3000
-+#define BM_CL_RCR_CI_CENA	0x3100
-+
-+#endif
-+
-+/* BTW, the drivers (and h/w programming model) already obtain the required
-+ * synchronisation for portal accesses via lwsync(), hwsync(), and
-+ * data-dependencies. Use of barrier()s or other order-preserving primitives
-+ * simply degrade performance. Hence the use of the __raw_*() interfaces, which
-+ * simply ensure that the compiler treats the portal registers as volatile (ie.
-+ * non-coherent). */
-+
-+/* Cache-inhibited register access. */
-+#define __bm_in(bm, o)		be32_to_cpu(__raw_readl((bm)->addr_ci + (o)))
-+#define __bm_out(bm, o, val)    __raw_writel(cpu_to_be32(val), \
-+					     (bm)->addr_ci + (o));
-+#define bm_in(reg)		__bm_in(&portal->addr, BM_REG_##reg)
-+#define bm_out(reg, val)	__bm_out(&portal->addr, BM_REG_##reg, val)
-+
-+/* Cache-enabled (index) register access */
-+#define __bm_cl_touch_ro(bm, o) dcbt_ro((bm)->addr_ce + (o))
-+#define __bm_cl_touch_rw(bm, o) dcbt_rw((bm)->addr_ce + (o))
-+#define __bm_cl_in(bm, o)	be32_to_cpu(__raw_readl((bm)->addr_ce + (o)))
-+#define __bm_cl_out(bm, o, val) \
-+	do { \
-+		u32 *__tmpclout = (bm)->addr_ce + (o); \
-+		__raw_writel(cpu_to_be32(val), __tmpclout); \
-+		dcbf(__tmpclout); \
-+	} while (0)
-+#define __bm_cl_invalidate(bm, o) dcbi((bm)->addr_ce + (o))
-+#define bm_cl_touch_ro(reg) __bm_cl_touch_ro(&portal->addr, BM_CL_##reg##_CENA)
-+#define bm_cl_touch_rw(reg) __bm_cl_touch_rw(&portal->addr, BM_CL_##reg##_CENA)
-+#define bm_cl_in(reg)	    __bm_cl_in(&portal->addr, BM_CL_##reg##_CENA)
-+#define bm_cl_out(reg, val) __bm_cl_out(&portal->addr, BM_CL_##reg##_CENA, val)
-+#define bm_cl_invalidate(reg)\
-+	__bm_cl_invalidate(&portal->addr, BM_CL_##reg##_CENA)
-+
-+/* Cyclic helper for rings. FIXME: once we are able to do fine-grain perf
-+ * analysis, look at using the "extra" bit in the ring index registers to avoid
-+ * cyclic issues. */
-+static inline u8 bm_cyc_diff(u8 ringsize, u8 first, u8 last)
-+{
-+	/* 'first' is included, 'last' is excluded */
-+	if (first <= last)
-+		return last - first;
-+	return ringsize + last - first;
-+}
-+
-+/* Portal modes.
-+ *   Enum types;
-+ *     pmode == production mode
-+ *     cmode == consumption mode,
-+ *   Enum values use 3 letter codes. First letter matches the portal mode,
-+ *   remaining two letters indicate;
-+ *     ci == cache-inhibited portal register
-+ *     ce == cache-enabled portal register
-+ *     vb == in-band valid-bit (cache-enabled)
-+ */
-+enum bm_rcr_pmode {		/* matches BCSP_CFG::RPM */
-+	bm_rcr_pci = 0,		/* PI index, cache-inhibited */
-+	bm_rcr_pce = 1,		/* PI index, cache-enabled */
-+	bm_rcr_pvb = 2		/* valid-bit */
-+};
-+enum bm_rcr_cmode {		/* s/w-only */
-+	bm_rcr_cci,		/* CI index, cache-inhibited */
-+	bm_rcr_cce		/* CI index, cache-enabled */
-+};
-+
-+
-+/* ------------------------- */
-+/* --- Portal structures --- */
-+
-+#define BM_RCR_SIZE		8
-+
-+struct bm_rcr {
-+	struct bm_rcr_entry *ring, *cursor;
-+	u8 ci, available, ithresh, vbit;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	u32 busy;
-+	enum bm_rcr_pmode pmode;
-+	enum bm_rcr_cmode cmode;
-+#endif
-+};
-+
-+struct bm_mc {
-+	struct bm_mc_command *cr;
-+	struct bm_mc_result *rr;
-+	u8 rridx, vbit;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	enum {
-+		/* Can only be _mc_start()ed */
-+		mc_idle,
-+		/* Can only be _mc_commit()ed or _mc_abort()ed */
-+		mc_user,
-+		/* Can only be _mc_retry()ed */
-+		mc_hw
-+	} state;
-+#endif
-+};
-+
-+struct bm_addr {
-+	void __iomem *addr_ce;	/* cache-enabled */
-+	void __iomem *addr_ci;	/* cache-inhibited */
-+};
-+
-+struct bm_portal {
-+	struct bm_addr addr;
-+	struct bm_rcr rcr;
-+	struct bm_mc mc;
-+	struct bm_portal_config config;
-+} ____cacheline_aligned;
-+
-+
-+/* --------------- */
-+/* --- RCR API --- */
-+
-+/* Bit-wise logic to wrap a ring pointer by clearing the "carry bit" */
-+#define RCR_CARRYCLEAR(p) \
-+	(void *)((unsigned long)(p) & (~(unsigned long)(BM_RCR_SIZE << 6)))
-+
-+/* Bit-wise logic to convert a ring pointer to a ring index */
-+static inline u8 RCR_PTR2IDX(struct bm_rcr_entry *e)
-+{
-+	return ((uintptr_t)e >> 6) & (BM_RCR_SIZE - 1);
-+}
-+
-+/* Increment the 'cursor' ring pointer, taking 'vbit' into account */
-+static inline void RCR_INC(struct bm_rcr *rcr)
-+{
-+	/* NB: this is odd-looking, but experiments show that it generates
-+	 * fast code with essentially no branching overheads. We increment to
-+	 * the next RCR pointer and handle overflow and 'vbit'. */
-+	struct bm_rcr_entry *partial = rcr->cursor + 1;
-+	rcr->cursor = RCR_CARRYCLEAR(partial);
-+	if (partial != rcr->cursor)
-+		rcr->vbit ^= BM_RCR_VERB_VBIT;
-+}
-+
-+static inline int bm_rcr_init(struct bm_portal *portal, enum bm_rcr_pmode pmode,
-+		__maybe_unused enum bm_rcr_cmode cmode)
-+{
-+	/* This use of 'register', as well as all other occurrences, is because
-+	 * it has been observed to generate much faster code with gcc than is
-+	 * otherwise the case. */
-+	register struct bm_rcr *rcr = &portal->rcr;
-+	u32 cfg;
-+	u8 pi;
-+
-+	rcr->ring = portal->addr.addr_ce + BM_CL_RCR;
-+	rcr->ci = bm_in(RCR_CI_CINH) & (BM_RCR_SIZE - 1);
-+
-+	pi = bm_in(RCR_PI_CINH) & (BM_RCR_SIZE - 1);
-+	rcr->cursor = rcr->ring + pi;
-+	rcr->vbit = (bm_in(RCR_PI_CINH) & BM_RCR_SIZE) ?  BM_RCR_VERB_VBIT : 0;
-+	rcr->available = BM_RCR_SIZE - 1
-+		- bm_cyc_diff(BM_RCR_SIZE, rcr->ci, pi);
-+	rcr->ithresh = bm_in(RCR_ITR);
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	rcr->busy = 0;
-+	rcr->pmode = pmode;
-+	rcr->cmode = cmode;
-+#endif
-+	cfg = (bm_in(CFG) & 0xffffffe0) | (pmode & 0x3); /* BCSP_CFG::RPM */
-+	bm_out(CFG, cfg);
-+	return 0;
-+}
-+
-+static inline void bm_rcr_finish(struct bm_portal *portal)
-+{
-+	register struct bm_rcr *rcr = &portal->rcr;
-+	u8 pi = bm_in(RCR_PI_CINH) & (BM_RCR_SIZE - 1);
-+	u8 ci = bm_in(RCR_CI_CINH) & (BM_RCR_SIZE - 1);
-+	DPA_ASSERT(!rcr->busy);
-+	if (pi != RCR_PTR2IDX(rcr->cursor))
-+		pr_crit("losing uncommited RCR entries\n");
-+	if (ci != rcr->ci)
-+		pr_crit("missing existing RCR completions\n");
-+	if (rcr->ci != RCR_PTR2IDX(rcr->cursor))
-+		pr_crit("RCR destroyed unquiesced\n");
-+}
-+
-+static inline struct bm_rcr_entry *bm_rcr_start(struct bm_portal *portal)
-+{
-+	register struct bm_rcr *rcr = &portal->rcr;
-+	DPA_ASSERT(!rcr->busy);
-+	if (!rcr->available)
-+		return NULL;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	rcr->busy = 1;
-+#endif
-+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64)
-+	dcbz_64(rcr->cursor);
-+#endif
-+	return rcr->cursor;
-+}
-+
-+static inline void bm_rcr_abort(struct bm_portal *portal)
-+{
-+	__maybe_unused register struct bm_rcr *rcr = &portal->rcr;
-+	DPA_ASSERT(rcr->busy);
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	rcr->busy = 0;
-+#endif
-+}
-+
-+static inline struct bm_rcr_entry *bm_rcr_pend_and_next(
-+					struct bm_portal *portal, u8 myverb)
-+{
-+	register struct bm_rcr *rcr = &portal->rcr;
-+	DPA_ASSERT(rcr->busy);
-+	DPA_ASSERT(rcr->pmode != bm_rcr_pvb);
-+	if (rcr->available == 1)
-+		return NULL;
-+	rcr->cursor->__dont_write_directly__verb = myverb | rcr->vbit;
-+	dcbf_64(rcr->cursor);
-+	RCR_INC(rcr);
-+	rcr->available--;
-+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64)
-+	dcbz_64(rcr->cursor);
-+#endif
-+	return rcr->cursor;
-+}
-+
-+static inline void bm_rcr_pci_commit(struct bm_portal *portal, u8 myverb)
-+{
-+	register struct bm_rcr *rcr = &portal->rcr;
-+	DPA_ASSERT(rcr->busy);
-+	DPA_ASSERT(rcr->pmode == bm_rcr_pci);
-+	rcr->cursor->__dont_write_directly__verb = myverb | rcr->vbit;
-+	RCR_INC(rcr);
-+	rcr->available--;
-+	hwsync();
-+	bm_out(RCR_PI_CINH, RCR_PTR2IDX(rcr->cursor));
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	rcr->busy = 0;
-+#endif
-+}
-+
-+static inline void bm_rcr_pce_prefetch(struct bm_portal *portal)
-+{
-+	__maybe_unused register struct bm_rcr *rcr = &portal->rcr;
-+	DPA_ASSERT(rcr->pmode == bm_rcr_pce);
-+	bm_cl_invalidate(RCR_PI);
-+	bm_cl_touch_rw(RCR_PI);
-+}
-+
-+static inline void bm_rcr_pce_commit(struct bm_portal *portal, u8 myverb)
-+{
-+	register struct bm_rcr *rcr = &portal->rcr;
-+	DPA_ASSERT(rcr->busy);
-+	DPA_ASSERT(rcr->pmode == bm_rcr_pce);
-+	rcr->cursor->__dont_write_directly__verb = myverb | rcr->vbit;
-+	RCR_INC(rcr);
-+	rcr->available--;
-+	lwsync();
-+	bm_cl_out(RCR_PI, RCR_PTR2IDX(rcr->cursor));
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	rcr->busy = 0;
-+#endif
-+}
-+
-+static inline void bm_rcr_pvb_commit(struct bm_portal *portal, u8 myverb)
-+{
-+	register struct bm_rcr *rcr = &portal->rcr;
-+	struct bm_rcr_entry *rcursor;
-+	DPA_ASSERT(rcr->busy);
-+	DPA_ASSERT(rcr->pmode == bm_rcr_pvb);
-+	lwsync();
-+	rcursor = rcr->cursor;
-+	rcursor->__dont_write_directly__verb = myverb | rcr->vbit;
-+	dcbf_64(rcursor);
-+	RCR_INC(rcr);
-+	rcr->available--;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	rcr->busy = 0;
-+#endif
-+}
-+
-+static inline u8 bm_rcr_cci_update(struct bm_portal *portal)
-+{
-+	register struct bm_rcr *rcr = &portal->rcr;
-+	u8 diff, old_ci = rcr->ci;
-+	DPA_ASSERT(rcr->cmode == bm_rcr_cci);
-+	rcr->ci = bm_in(RCR_CI_CINH) & (BM_RCR_SIZE - 1);
-+	diff = bm_cyc_diff(BM_RCR_SIZE, old_ci, rcr->ci);
-+	rcr->available += diff;
-+	return diff;
-+}
-+
-+static inline void bm_rcr_cce_prefetch(struct bm_portal *portal)
-+{
-+	__maybe_unused register struct bm_rcr *rcr = &portal->rcr;
-+	DPA_ASSERT(rcr->cmode == bm_rcr_cce);
-+	bm_cl_touch_ro(RCR_CI);
-+}
-+
-+static inline u8 bm_rcr_cce_update(struct bm_portal *portal)
-+{
-+	register struct bm_rcr *rcr = &portal->rcr;
-+	u8 diff, old_ci = rcr->ci;
-+	DPA_ASSERT(rcr->cmode == bm_rcr_cce);
-+	rcr->ci = bm_cl_in(RCR_CI) & (BM_RCR_SIZE - 1);
-+	bm_cl_invalidate(RCR_CI);
-+	diff = bm_cyc_diff(BM_RCR_SIZE, old_ci, rcr->ci);
-+	rcr->available += diff;
-+	return diff;
-+}
-+
-+static inline u8 bm_rcr_get_ithresh(struct bm_portal *portal)
-+{
-+	register struct bm_rcr *rcr = &portal->rcr;
-+	return rcr->ithresh;
-+}
-+
-+static inline void bm_rcr_set_ithresh(struct bm_portal *portal, u8 ithresh)
-+{
-+	register struct bm_rcr *rcr = &portal->rcr;
-+	rcr->ithresh = ithresh;
-+	bm_out(RCR_ITR, ithresh);
-+}
-+
-+static inline u8 bm_rcr_get_avail(struct bm_portal *portal)
-+{
-+	register struct bm_rcr *rcr = &portal->rcr;
-+	return rcr->available;
-+}
-+
-+static inline u8 bm_rcr_get_fill(struct bm_portal *portal)
-+{
-+	register struct bm_rcr *rcr = &portal->rcr;
-+	return BM_RCR_SIZE - 1 - rcr->available;
-+}
-+
-+
-+/* ------------------------------ */
-+/* --- Management command API --- */
-+
-+static inline int bm_mc_init(struct bm_portal *portal)
-+{
-+	register struct bm_mc *mc = &portal->mc;
-+	mc->cr = portal->addr.addr_ce + BM_CL_CR;
-+	mc->rr = portal->addr.addr_ce + BM_CL_RR0;
-+	mc->rridx = (__raw_readb(&mc->cr->__dont_write_directly__verb) &
-+			BM_MCC_VERB_VBIT) ?  0 : 1;
-+	mc->vbit = mc->rridx ? BM_MCC_VERB_VBIT : 0;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	mc->state = mc_idle;
-+#endif
-+	return 0;
-+}
-+
-+static inline void bm_mc_finish(struct bm_portal *portal)
-+{
-+	__maybe_unused register struct bm_mc *mc = &portal->mc;
-+	DPA_ASSERT(mc->state == mc_idle);
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	if (mc->state != mc_idle)
-+		pr_crit("Losing incomplete MC command\n");
-+#endif
-+}
-+
-+static inline struct bm_mc_command *bm_mc_start(struct bm_portal *portal)
-+{
-+	register struct bm_mc *mc = &portal->mc;
-+	DPA_ASSERT(mc->state == mc_idle);
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	mc->state = mc_user;
-+#endif
-+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64)
-+	dcbz_64(mc->cr);
-+#endif
-+	return mc->cr;
-+}
-+
-+static inline void bm_mc_abort(struct bm_portal *portal)
-+{
-+	__maybe_unused register struct bm_mc *mc = &portal->mc;
-+	DPA_ASSERT(mc->state == mc_user);
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	mc->state = mc_idle;
-+#endif
-+}
-+
-+static inline void bm_mc_commit(struct bm_portal *portal, u8 myverb)
-+{
-+	register struct bm_mc *mc = &portal->mc;
-+	struct bm_mc_result *rr = mc->rr + mc->rridx;
-+	DPA_ASSERT(mc->state == mc_user);
-+	lwsync();
-+	mc->cr->__dont_write_directly__verb = myverb | mc->vbit;
-+	dcbf(mc->cr);
-+	dcbit_ro(rr);
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	mc->state = mc_hw;
-+#endif
-+}
-+
-+static inline struct bm_mc_result *bm_mc_result(struct bm_portal *portal)
-+{
-+	register struct bm_mc *mc = &portal->mc;
-+	struct bm_mc_result *rr = mc->rr + mc->rridx;
-+	DPA_ASSERT(mc->state == mc_hw);
-+	/* The inactive response register's verb byte always returns zero until
-+	 * its command is submitted and completed. This includes the valid-bit,
-+	 * in case you were wondering... */
-+	if (!__raw_readb(&rr->verb)) {
-+		dcbit_ro(rr);
-+		return NULL;
-+	}
-+	mc->rridx ^= 1;
-+	mc->vbit ^= BM_MCC_VERB_VBIT;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	mc->state = mc_idle;
-+#endif
-+	return rr;
-+}
-+
-+
-+/* ------------------------------------- */
-+/* --- Portal interrupt register API --- */
-+
-+static inline int bm_isr_init(__always_unused struct bm_portal *portal)
-+{
-+	return 0;
-+}
-+
-+static inline void bm_isr_finish(__always_unused struct bm_portal *portal)
-+{
-+}
-+
-+#define SCN_REG(bpid) BM_REG_SCN((bpid) / 32)
-+#define SCN_BIT(bpid) (0x80000000 >> (bpid & 31))
-+static inline void bm_isr_bscn_mask(struct bm_portal *portal, u8 bpid,
-+					int enable)
-+{
-+	u32 val;
-+	DPA_ASSERT(bpid < bman_pool_max);
-+	/* REG_SCN for bpid=0..31, REG_SCN+4 for bpid=32..63 */
-+	val = __bm_in(&portal->addr, SCN_REG(bpid));
-+	if (enable)
-+		val |= SCN_BIT(bpid);
-+	else
-+		val &= ~SCN_BIT(bpid);
-+	__bm_out(&portal->addr, SCN_REG(bpid), val);
-+}
-+
-+static inline u32 __bm_isr_read(struct bm_portal *portal, enum bm_isr_reg n)
-+{
-+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+	return __bm_in(&portal->addr, BM_REG_ISR + (n << 6));
-+#else
-+	return __bm_in(&portal->addr, BM_REG_ISR + (n << 2));
-+#endif
-+}
-+
-+static inline void __bm_isr_write(struct bm_portal *portal, enum bm_isr_reg n,
-+					u32 val)
-+{
-+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+	__bm_out(&portal->addr, BM_REG_ISR + (n << 6), val);
-+#else
-+	__bm_out(&portal->addr, BM_REG_ISR + (n << 2), val);
-+#endif
-+}
-+
-+/* Buffer Pool Cleanup */
-+static inline int bm_shutdown_pool(struct bm_portal *p, u32 bpid)
-+{
-+	struct bm_mc_command *bm_cmd;
-+	struct bm_mc_result *bm_res;
-+
-+	int aq_count = 0;
-+	bool stop = false;
-+	while (!stop) {
-+		/* Acquire buffers until empty */
-+		bm_cmd = bm_mc_start(p);
-+		bm_cmd->acquire.bpid = bpid;
-+		bm_mc_commit(p, BM_MCC_VERB_CMD_ACQUIRE |  1);
-+		while (!(bm_res = bm_mc_result(p)))
-+			cpu_relax();
-+		if (!(bm_res->verb & BM_MCR_VERB_ACQUIRE_BUFCOUNT)) {
-+			/* Pool is empty */
-+			/* TBD : Should we do a few extra iterations in
-+			   case some other some blocks keep buffers 'on deck',
-+			   which may also be problematic */
-+			stop = true;
-+		} else
-+			++aq_count;
-+	}
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/bman_private.h
-@@ -0,0 +1,166 @@
-+/* Copyright 2008-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "dpa_sys.h"
-+#include <linux/fsl_bman.h>
-+
-+/* Revision info (for errata and feature handling) */
-+#define BMAN_REV10 0x0100
-+#define BMAN_REV20 0x0200
-+#define BMAN_REV21 0x0201
-+#define QBMAN_ANY_PORTAL_IDX 0xffffffff
-+extern u16 bman_ip_rev; /* 0 if uninitialised, otherwise QMAN_REVx */
-+
-+/*
-+ * Global variables of the max portal/pool number this bman version supported
-+ */
-+extern u16 bman_pool_max;
-+
-+/* used by CCSR and portal interrupt code */
-+enum bm_isr_reg {
-+	bm_isr_status = 0,
-+	bm_isr_enable = 1,
-+	bm_isr_disable = 2,
-+	bm_isr_inhibit = 3
-+};
-+
-+struct bm_portal_config {
-+	/* Corenet portal addresses;
-+	 * [0]==cache-enabled, [1]==cache-inhibited. */
-+	__iomem void *addr_virt[2];
-+	struct resource addr_phys[2];
-+	/* Allow these to be joined in lists */
-+	struct list_head list;
-+	/* User-visible portal configuration settings */
-+	struct bman_portal_config public_cfg;
-+	/* power management saved data */
-+	u32 saved_isdr;
-+};
-+
-+#ifdef CONFIG_FSL_BMAN_CONFIG
-+/* Hooks from bman_driver.c to bman_config.c */
-+int bman_init_ccsr(struct device_node *node);
-+#endif
-+
-+/* Hooks from bman_driver.c in to bman_high.c */
-+struct bman_portal *bman_create_portal(
-+				       struct bman_portal *portal,
-+				       const struct bm_portal_config *config);
-+struct bman_portal *bman_create_affine_portal(
-+			const struct bm_portal_config *config);
-+struct bman_portal *bman_create_affine_slave(struct bman_portal *redirect,
-+								int cpu);
-+void bman_destroy_portal(struct bman_portal *bm);
-+
-+const struct bm_portal_config *bman_destroy_affine_portal(void);
-+
-+/* Hooks from fsl_usdpaa.c to bman_driver.c */
-+struct bm_portal_config *bm_get_unused_portal(void);
-+struct bm_portal_config *bm_get_unused_portal_idx(uint32_t idx);
-+void bm_put_unused_portal(struct bm_portal_config *pcfg);
-+void bm_set_liodns(struct bm_portal_config *pcfg);
-+
-+/* Pool logic in the portal driver, during initialisation, needs to know if
-+ * there's access to CCSR or not (if not, it'll cripple the pool allocator). */
-+#ifdef CONFIG_FSL_BMAN_CONFIG
-+int bman_have_ccsr(void);
-+#else
-+#define bman_have_ccsr() 0
-+#endif
-+
-+/* Stockpile build constants. The _LOW value: when bman_acquire() is called and
-+ * the stockpile fill-level is <= _LOW, an acquire is attempted from h/w but it
-+ * might fail (if the buffer pool is depleted). So this value provides some
-+ * "stagger" in that the bman_acquire() function will only fail if lots of bufs
-+ * are requested at once or if h/w has been tested a couple of times without
-+ * luck. The _HIGH value: when bman_release() is called and the stockpile
-+ * fill-level is >= _HIGH, a release is attempted to h/w but it might fail (if
-+ * the release ring is full). So this value provides some "stagger" so that
-+ * ring-access is retried a couple of times prior to the API returning a
-+ * failure. The following *must* be true;
-+ *   BMAN_STOCKPILE_HIGH-BMAN_STOCKPILE_LOW > 8
-+ *     (to avoid thrashing)
-+ *   BMAN_STOCKPILE_SZ >= 16
-+ *     (as the release logic expects to either send 8 buffers to hw prior to
-+ *     adding the given buffers to the stockpile or add the buffers to the
-+ *     stockpile before sending 8 to hw, as the API must be an all-or-nothing
-+ *     success/fail.)
-+ */
-+#define BMAN_STOCKPILE_SZ   16u /* number of bufs in per-pool cache */
-+#define BMAN_STOCKPILE_LOW  2u  /* when fill is <= this, acquire from hw */
-+#define BMAN_STOCKPILE_HIGH 14u /* when fill is >= this, release to hw */
-+
-+/*************************************************/
-+/*   BMan s/w corenet portal, low-level i/face   */
-+/*************************************************/
-+
-+/* Used by all portal interrupt registers except 'inhibit'
-+ * This mask contains all the "irqsource" bits visible to API users
-+ */
-+#define BM_PIRQ_VISIBLE	(BM_PIRQ_RCRI | BM_PIRQ_BSCN)
-+
-+/* These are bm_<reg>_<verb>(). So for example, bm_disable_write() means "write
-+ * the disable register" rather than "disable the ability to write". */
-+#define bm_isr_status_read(bm)		__bm_isr_read(bm, bm_isr_status)
-+#define bm_isr_status_clear(bm, m)	__bm_isr_write(bm, bm_isr_status, m)
-+#define bm_isr_enable_read(bm)		__bm_isr_read(bm, bm_isr_enable)
-+#define bm_isr_enable_write(bm, v)	__bm_isr_write(bm, bm_isr_enable, v)
-+#define bm_isr_disable_read(bm)		__bm_isr_read(bm, bm_isr_disable)
-+#define bm_isr_disable_write(bm, v)	__bm_isr_write(bm, bm_isr_disable, v)
-+#define bm_isr_inhibit(bm)		__bm_isr_write(bm, bm_isr_inhibit, 1)
-+#define bm_isr_uninhibit(bm)		__bm_isr_write(bm, bm_isr_inhibit, 0)
-+
-+#ifdef CONFIG_FSL_BMAN_CONFIG
-+/* Set depletion thresholds associated with a buffer pool. Requires that the
-+ * operating system have access to Bman CCSR (ie. compiled in support and
-+ * run-time access courtesy of the device-tree). */
-+int bm_pool_set(u32 bpid, const u32 *thresholds);
-+#define BM_POOL_THRESH_SW_ENTER 0
-+#define BM_POOL_THRESH_SW_EXIT  1
-+#define BM_POOL_THRESH_HW_ENTER 2
-+#define BM_POOL_THRESH_HW_EXIT  3
-+
-+/* Read the free buffer count for a given buffer */
-+u32 bm_pool_free_buffers(u32 bpid);
-+
-+__init int bman_init(void);
-+__init int bman_resource_init(void);
-+
-+const struct bm_portal_config *bman_get_bm_portal_config(
-+						struct bman_portal *portal);
-+
-+/* power management */
-+#ifdef CONFIG_SUSPEND
-+void suspend_unused_bportal(void);
-+void resume_unused_bportal(void);
-+#endif
-+
-+#endif /* CONFIG_FSL_BMAN_CONFIG */
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/bman_test.c
-@@ -0,0 +1,56 @@
-+/* Copyright 2008-2011 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "bman_test.h"
-+
-+MODULE_AUTHOR("Geoff Thorpe");
-+MODULE_LICENSE("Dual BSD/GPL");
-+MODULE_DESCRIPTION("Bman testing");
-+
-+static int test_init(void)
-+{
-+#ifdef CONFIG_FSL_BMAN_TEST_HIGH
-+	int loop = 1;
-+	while (loop--)
-+		bman_test_high();
-+#endif
-+#ifdef CONFIG_FSL_BMAN_TEST_THRESH
-+	bman_test_thresh();
-+#endif
-+	return 0;
-+}
-+
-+static void test_exit(void)
-+{
-+}
-+
-+module_init(test_init);
-+module_exit(test_exit);
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/bman_test.h
-@@ -0,0 +1,44 @@
-+/* Copyright 2008-2011 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/io.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/kthread.h>
-+
-+#include <linux/fsl_bman.h>
-+
-+void bman_test_high(void);
-+void bman_test_thresh(void);
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/bman_test_high.c
-@@ -0,0 +1,183 @@
-+/* Copyright 2008-2011 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "bman_test.h"
-+#include "bman_private.h"
-+
-+/*************/
-+/* constants */
-+/*************/
-+
-+#define PORTAL_OPAQUE	((void *)0xf00dbeef)
-+#define POOL_OPAQUE	((void *)0xdeadabba)
-+#define NUM_BUFS	93
-+#define LOOPS		3
-+#define BMAN_TOKEN_MASK 0x00FFFFFFFFFFLLU
-+
-+/***************/
-+/* global vars */
-+/***************/
-+
-+static struct bman_pool *pool;
-+static int depleted;
-+static struct bm_buffer bufs_in[NUM_BUFS] ____cacheline_aligned;
-+static struct bm_buffer bufs_out[NUM_BUFS] ____cacheline_aligned;
-+static int bufs_received;
-+
-+/* Predeclare the callback so we can instantiate pool parameters */
-+static void depletion_cb(struct bman_portal *, struct bman_pool *, void *, int);
-+
-+/**********************/
-+/* internal functions */
-+/**********************/
-+
-+static void bufs_init(void)
-+{
-+	int i;
-+	for (i = 0; i < NUM_BUFS; i++)
-+		bm_buffer_set64(&bufs_in[i], 0xfedc01234567LLU * i);
-+	bufs_received = 0;
-+}
-+
-+static inline int bufs_cmp(const struct bm_buffer *a, const struct bm_buffer *b)
-+{
-+	if ((bman_ip_rev == BMAN_REV20) || (bman_ip_rev == BMAN_REV21)) {
-+
-+		/* On SoCs with Bman revison 2.0, Bman only respects the 40
-+		 * LS-bits of buffer addresses, masking off the upper 8-bits on
-+		 * release commands. The API provides for 48-bit addresses
-+		 * because some SoCs support all 48-bits. When generating
-+		 * garbage addresses for testing, we either need to zero the
-+		 * upper 8-bits when releasing to Bman (otherwise we'll be
-+		 * disappointed when the buffers we acquire back from Bman
-+		 * don't match), or we need to mask the upper 8-bits off when
-+		 * comparing. We do the latter.
-+		 */
-+		if ((bm_buffer_get64(a) & BMAN_TOKEN_MASK)
-+				< (bm_buffer_get64(b) & BMAN_TOKEN_MASK))
-+			return -1;
-+		if ((bm_buffer_get64(a) & BMAN_TOKEN_MASK)
-+				> (bm_buffer_get64(b) & BMAN_TOKEN_MASK))
-+			return 1;
-+	} else {
-+		if (bm_buffer_get64(a) < bm_buffer_get64(b))
-+			return -1;
-+		if (bm_buffer_get64(a) > bm_buffer_get64(b))
-+			return 1;
-+	}
-+
-+	return 0;
-+}
-+
-+static void bufs_confirm(void)
-+{
-+	int i, j;
-+	for (i = 0; i < NUM_BUFS; i++) {
-+		int matches = 0;
-+		for (j = 0; j < NUM_BUFS; j++)
-+			if (!bufs_cmp(&bufs_in[i], &bufs_out[j]))
-+				matches++;
-+		BUG_ON(matches != 1);
-+	}
-+}
-+
-+/********/
-+/* test */
-+/********/
-+
-+static void depletion_cb(struct bman_portal *__portal, struct bman_pool *__pool,
-+			void *pool_ctx, int __depleted)
-+{
-+	BUG_ON(__pool != pool);
-+	BUG_ON(pool_ctx != POOL_OPAQUE);
-+	depleted = __depleted;
-+}
-+
-+void bman_test_high(void)
-+{
-+	struct bman_pool_params pparams = {
-+		.flags = BMAN_POOL_FLAG_DEPLETION | BMAN_POOL_FLAG_DYNAMIC_BPID,
-+		.cb = depletion_cb,
-+		.cb_ctx = POOL_OPAQUE,
-+	};
-+	int i, loops = LOOPS;
-+	struct bm_buffer tmp_buf;
-+
-+	bufs_init();
-+
-+	pr_info("BMAN:  --- starting high-level test ---\n");
-+
-+	pool = bman_new_pool(&pparams);
-+	BUG_ON(!pool);
-+
-+	/*******************/
-+	/* Release buffers */
-+	/*******************/
-+do_loop:
-+	i = 0;
-+	while (i < NUM_BUFS) {
-+		u32 flags = BMAN_RELEASE_FLAG_WAIT;
-+		int num = 8;
-+		if ((i + num) > NUM_BUFS)
-+			num = NUM_BUFS - i;
-+		if ((i + num) == NUM_BUFS)
-+			flags |= BMAN_RELEASE_FLAG_WAIT_SYNC;
-+		if (bman_release(pool, bufs_in + i, num, flags))
-+			panic("bman_release() failed\n");
-+		i += num;
-+	}
-+
-+	/*******************/
-+	/* Acquire buffers */
-+	/*******************/
-+	while (i > 0) {
-+		int tmp, num = 8;
-+		if (num > i)
-+			num = i;
-+		tmp = bman_acquire(pool, bufs_out + i - num, num, 0);
-+		BUG_ON(tmp != num);
-+		i -= num;
-+	}
-+
-+	i = bman_acquire(pool, &tmp_buf, 1, 0);
-+	BUG_ON(i > 0);
-+
-+	bufs_confirm();
-+
-+	if (--loops)
-+		goto do_loop;
-+
-+	/************/
-+	/* Clean up */
-+	/************/
-+	bman_free_pool(pool);
-+	pr_info("BMAN:  --- finished high-level test ---\n");
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/bman_test_thresh.c
-@@ -0,0 +1,196 @@
-+/* Copyright 2010-2011 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "bman_test.h"
-+
-+/* Test constants */
-+#define TEST_NUMBUFS	129728
-+#define TEST_EXIT	129536
-+#define TEST_ENTRY	129024
-+
-+struct affine_test_data {
-+	struct task_struct *t;
-+	int cpu;
-+	int expect_affinity;
-+	int drain;
-+	int num_enter;
-+	int num_exit;
-+	struct list_head node;
-+	struct completion wakethread;
-+	struct completion wakeparent;
-+};
-+
-+static void cb_depletion(struct bman_portal *portal,
-+			struct bman_pool *pool,
-+			void *opaque,
-+			int depleted)
-+{
-+	struct affine_test_data *data = opaque;
-+	int c = smp_processor_id();
-+	pr_info("cb_depletion: bpid=%d, depleted=%d, cpu=%d, original=%d\n",
-+		bman_get_params(pool)->bpid, !!depleted, c, data->cpu);
-+	/* We should be executing on the CPU of the thread that owns the pool if
-+	 * and that CPU has an affine portal (ie. it isn't slaved). */
-+	BUG_ON((c != data->cpu) && data->expect_affinity);
-+	BUG_ON((c == data->cpu) && !data->expect_affinity);
-+	if (depleted)
-+		data->num_enter++;
-+	else
-+		data->num_exit++;
-+}
-+
-+/* Params used to set up a pool, this also dynamically allocates a BPID */
-+static const struct bman_pool_params params_nocb = {
-+	.flags = BMAN_POOL_FLAG_DYNAMIC_BPID | BMAN_POOL_FLAG_THRESH,
-+	.thresholds = { TEST_ENTRY, TEST_EXIT, 0, 0 }
-+};
-+
-+/* Params used to set up each cpu's pool with callbacks enabled */
-+static struct bman_pool_params params_cb = {
-+	.bpid = 0, /* will be replaced to match pool_nocb */
-+	.flags = BMAN_POOL_FLAG_DEPLETION,
-+	.cb = cb_depletion
-+};
-+
-+static struct bman_pool *pool_nocb;
-+static LIST_HEAD(threads);
-+
-+static int affine_test(void *__data)
-+{
-+	struct bman_pool *pool;
-+	struct affine_test_data *data = __data;
-+	struct bman_pool_params my_params = params_cb;
-+
-+	pr_info("thread %d: starting\n", data->cpu);
-+	/* create the pool */
-+	my_params.cb_ctx = data;
-+	pool = bman_new_pool(&my_params);
-+	BUG_ON(!pool);
-+	complete(&data->wakeparent);
-+	wait_for_completion(&data->wakethread);
-+	init_completion(&data->wakethread);
-+
-+	/* if we're the drainer, we get signalled for that */
-+	if (data->drain) {
-+		struct bm_buffer buf;
-+		int ret;
-+		pr_info("thread %d: draining...\n", data->cpu);
-+		do {
-+			ret = bman_acquire(pool, &buf, 1, 0);
-+		} while (ret > 0);
-+		pr_info("thread %d: draining done.\n", data->cpu);
-+		complete(&data->wakeparent);
-+		wait_for_completion(&data->wakethread);
-+		init_completion(&data->wakethread);
-+	}
-+
-+	/* cleanup */
-+	bman_free_pool(pool);
-+	while (!kthread_should_stop())
-+		cpu_relax();
-+	pr_info("thread %d: exiting\n", data->cpu);
-+	return 0;
-+}
-+
-+static struct affine_test_data *start_affine_test(int cpu, int drain)
-+{
-+	struct affine_test_data *data = kmalloc(sizeof(*data), GFP_KERNEL);
-+
-+	if (!data)
-+		return NULL;
-+	data->cpu = cpu;
-+	data->expect_affinity = cpumask_test_cpu(cpu, bman_affine_cpus());
-+	data->drain = drain;
-+	data->num_enter = 0;
-+	data->num_exit = 0;
-+	init_completion(&data->wakethread);
-+	init_completion(&data->wakeparent);
-+	list_add_tail(&data->node, &threads);
-+	data->t = kthread_create(affine_test, data, "threshtest%d", cpu);
-+	BUG_ON(IS_ERR(data->t));
-+	kthread_bind(data->t, cpu);
-+	wake_up_process(data->t);
-+	return data;
-+}
-+
-+void bman_test_thresh(void)
-+{
-+	int loop = TEST_NUMBUFS;
-+	int ret, num_cpus = 0;
-+	struct affine_test_data *data, *drainer = NULL;
-+
-+	pr_info("bman_test_thresh: start\n");
-+
-+	/* allocate a BPID and seed it */
-+	pool_nocb = bman_new_pool(&params_nocb);
-+	BUG_ON(!pool_nocb);
-+	while (loop--) {
-+		struct bm_buffer buf;
-+		bm_buffer_set64(&buf, 0x0badbeef + loop);
-+		ret = bman_release(pool_nocb, &buf, 1,
-+					BMAN_RELEASE_FLAG_WAIT);
-+		BUG_ON(ret);
-+	}
-+	while (!bman_rcr_is_empty())
-+		cpu_relax();
-+	pr_info("bman_test_thresh: buffers are in\n");
-+
-+	/* create threads and wait for them to create pools */
-+	params_cb.bpid = bman_get_params(pool_nocb)->bpid;
-+	for_each_cpu(loop, cpu_online_mask) {
-+		data = start_affine_test(loop, drainer ? 0 : 1);
-+		BUG_ON(!data);
-+		if (!drainer)
-+			drainer = data;
-+		num_cpus++;
-+		wait_for_completion(&data->wakeparent);
-+	}
-+
-+	/* signal the drainer to start draining */
-+	complete(&drainer->wakethread);
-+	wait_for_completion(&drainer->wakeparent);
-+	init_completion(&drainer->wakeparent);
-+
-+	/* tear down */
-+	list_for_each_entry_safe(data, drainer, &threads, node) {
-+		complete(&data->wakethread);
-+		ret = kthread_stop(data->t);
-+		BUG_ON(ret);
-+		list_del(&data->node);
-+		/* check that we get the expected callbacks (and no others) */
-+		BUG_ON(data->num_enter != 1);
-+		BUG_ON(data->num_exit != 0);
-+		kfree(data);
-+	}
-+	bman_free_pool(pool_nocb);
-+
-+	pr_info("bman_test_thresh: done\n");
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/dpa_alloc.c
-@@ -0,0 +1,706 @@
-+/* Copyright 2009-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "dpa_sys.h"
-+#include <linux/fsl_qman.h>
-+#include <linux/fsl_bman.h>
-+
-+/* Qman and Bman APIs are front-ends to the common code; */
-+
-+static DECLARE_DPA_ALLOC(bpalloc); /* BPID allocator */
-+static DECLARE_DPA_ALLOC(fqalloc); /* FQID allocator */
-+static DECLARE_DPA_ALLOC(qpalloc); /* pool-channel allocator */
-+static DECLARE_DPA_ALLOC(cgralloc); /* CGR ID allocator */
-+static DECLARE_DPA_ALLOC(ceetm0_challoc); /* CEETM Channel ID allocator */
-+static DECLARE_DPA_ALLOC(ceetm0_lfqidalloc); /* CEETM LFQID allocator */
-+static DECLARE_DPA_ALLOC(ceetm1_challoc); /* CEETM Channel ID allocator */
-+static DECLARE_DPA_ALLOC(ceetm1_lfqidalloc); /* CEETM LFQID allocator */
-+
-+/* This is a sort-of-conditional dpa_alloc_free() routine. Eg. when releasing
-+ * FQIDs (probably from user-space), it can filter out those that aren't in the
-+ * OOS state (better to leak a h/w resource than to crash). This function
-+ * returns the number of invalid IDs that were not released. */
-+static u32 release_id_range(struct dpa_alloc *alloc, u32 id, u32 count,
-+			     int (*is_valid)(u32 id))
-+{
-+	int valid_mode = 0;
-+	u32 loop = id, total_invalid = 0;
-+	while (loop < (id + count)) {
-+		int isvalid = is_valid ? is_valid(loop) : 1;
-+		if (!valid_mode) {
-+			/* We're looking for a valid ID to terminate an invalid
-+			 * range */
-+			if (isvalid) {
-+				/* We finished a range of invalid IDs, a valid
-+				 * range is now underway */
-+				valid_mode = 1;
-+				count -= (loop - id);
-+				id = loop;
-+			} else
-+				total_invalid++;
-+		} else {
-+			/* We're looking for an invalid ID to terminate a
-+			 * valid range */
-+			if (!isvalid) {
-+				/* Release the range of valid IDs, an unvalid
-+				 * range is now underway */
-+				if (loop > id)
-+					dpa_alloc_free(alloc, id, loop - id);
-+				valid_mode = 0;
-+			}
-+		}
-+		loop++;
-+	}
-+	/* Release any unterminated range of valid IDs */
-+	if (valid_mode && count)
-+		dpa_alloc_free(alloc, id, count);
-+	return total_invalid;
-+}
-+
-+/* BPID allocator front-end */
-+
-+int bman_alloc_bpid_range(u32 *result, u32 count, u32 align, int partial)
-+{
-+	return dpa_alloc_new(&bpalloc, result, count, align, partial);
-+}
-+EXPORT_SYMBOL(bman_alloc_bpid_range);
-+
-+static int bp_cleanup(u32 bpid)
-+{
-+	return bman_shutdown_pool(bpid) == 0;
-+}
-+void bman_release_bpid_range(u32 bpid, u32 count)
-+{
-+	u32 total_invalid = release_id_range(&bpalloc, bpid, count, bp_cleanup);
-+	if (total_invalid)
-+		pr_err("BPID range [%d..%d] (%d) had %d leaks\n",
-+			bpid, bpid + count - 1, count, total_invalid);
-+}
-+EXPORT_SYMBOL(bman_release_bpid_range);
-+
-+void bman_seed_bpid_range(u32 bpid, u32 count)
-+{
-+	dpa_alloc_seed(&bpalloc, bpid, count);
-+}
-+EXPORT_SYMBOL(bman_seed_bpid_range);
-+
-+int bman_reserve_bpid_range(u32 bpid, u32 count)
-+{
-+	return dpa_alloc_reserve(&bpalloc, bpid, count);
-+}
-+EXPORT_SYMBOL(bman_reserve_bpid_range);
-+
-+
-+/* FQID allocator front-end */
-+
-+int qman_alloc_fqid_range(u32 *result, u32 count, u32 align, int partial)
-+{
-+	return dpa_alloc_new(&fqalloc, result, count, align, partial);
-+}
-+EXPORT_SYMBOL(qman_alloc_fqid_range);
-+
-+static int fq_cleanup(u32 fqid)
-+{
-+	return qman_shutdown_fq(fqid) == 0;
-+}
-+void qman_release_fqid_range(u32 fqid, u32 count)
-+{
-+	u32 total_invalid = release_id_range(&fqalloc, fqid, count, fq_cleanup);
-+	if (total_invalid)
-+		pr_err("FQID range [%d..%d] (%d) had %d leaks\n",
-+			fqid, fqid + count - 1, count, total_invalid);
-+}
-+EXPORT_SYMBOL(qman_release_fqid_range);
-+
-+int qman_reserve_fqid_range(u32 fqid, u32 count)
-+{
-+	return dpa_alloc_reserve(&fqalloc, fqid, count);
-+}
-+EXPORT_SYMBOL(qman_reserve_fqid_range);
-+
-+void qman_seed_fqid_range(u32 fqid, u32 count)
-+{
-+	dpa_alloc_seed(&fqalloc, fqid, count);
-+}
-+EXPORT_SYMBOL(qman_seed_fqid_range);
-+
-+/* Pool-channel allocator front-end */
-+
-+int qman_alloc_pool_range(u32 *result, u32 count, u32 align, int partial)
-+{
-+	return dpa_alloc_new(&qpalloc, result, count, align, partial);
-+}
-+EXPORT_SYMBOL(qman_alloc_pool_range);
-+
-+static int qpool_cleanup(u32 qp)
-+{
-+	/* We query all FQDs starting from
-+	 * FQID 1 until we get an "invalid FQID" error, looking for non-OOS FQDs
-+	 * whose destination channel is the pool-channel being released.
-+	 * When a non-OOS FQD is found we attempt to clean it up */
-+	struct qman_fq fq = {
-+		.fqid = 1
-+	};
-+	int err;
-+	do {
-+		struct qm_mcr_queryfq_np np;
-+		err = qman_query_fq_np(&fq, &np);
-+		if (err)
-+			/* FQID range exceeded, found no problems */
-+			return 1;
-+		if ((np.state & QM_MCR_NP_STATE_MASK) != QM_MCR_NP_STATE_OOS) {
-+			struct qm_fqd fqd;
-+			err = qman_query_fq(&fq, &fqd);
-+			BUG_ON(err);
-+			if (fqd.dest.channel == qp) {
-+				/* The channel is the FQ's target, clean it */
-+				if (qman_shutdown_fq(fq.fqid) != 0)
-+					/* Couldn't shut down the FQ
-+					   so the pool must be leaked */
-+					return 0;
-+			}
-+		}
-+		/* Move to the next FQID */
-+		fq.fqid++;
-+	} while (1);
-+}
-+void qman_release_pool_range(u32 qp, u32 count)
-+{
-+	u32 total_invalid = release_id_range(&qpalloc, qp,
-+					     count, qpool_cleanup);
-+	if (total_invalid) {
-+		/* Pool channels are almost always used individually */
-+		if (count == 1)
-+			pr_err("Pool channel 0x%x had %d leaks\n",
-+				qp, total_invalid);
-+		else
-+			pr_err("Pool channels [%d..%d] (%d) had %d leaks\n",
-+				qp, qp + count - 1, count, total_invalid);
-+	}
-+}
-+EXPORT_SYMBOL(qman_release_pool_range);
-+
-+
-+void qman_seed_pool_range(u32 poolid, u32 count)
-+{
-+	dpa_alloc_seed(&qpalloc, poolid, count);
-+
-+}
-+EXPORT_SYMBOL(qman_seed_pool_range);
-+
-+int qman_reserve_pool_range(u32 poolid, u32 count)
-+{
-+	return dpa_alloc_reserve(&qpalloc, poolid, count);
-+}
-+EXPORT_SYMBOL(qman_reserve_pool_range);
-+
-+
-+/* CGR ID allocator front-end */
-+
-+int qman_alloc_cgrid_range(u32 *result, u32 count, u32 align, int partial)
-+{
-+	return dpa_alloc_new(&cgralloc, result, count, align, partial);
-+}
-+EXPORT_SYMBOL(qman_alloc_cgrid_range);
-+
-+static int cqr_cleanup(u32 cgrid)
-+{
-+	/* We query all FQDs starting from
-+	 * FQID 1 until we get an "invalid FQID" error, looking for non-OOS FQDs
-+	 * whose CGR is the CGR being released.
-+	 */
-+	struct qman_fq fq = {
-+		.fqid = 1
-+	};
-+	int err;
-+	do {
-+		struct qm_mcr_queryfq_np np;
-+		err = qman_query_fq_np(&fq, &np);
-+		if (err)
-+			/* FQID range exceeded, found no problems */
-+			return 1;
-+		if ((np.state & QM_MCR_NP_STATE_MASK) != QM_MCR_NP_STATE_OOS) {
-+			struct qm_fqd fqd;
-+			err = qman_query_fq(&fq, &fqd);
-+			BUG_ON(err);
-+			if ((fqd.fq_ctrl & QM_FQCTRL_CGE) &&
-+			    (fqd.cgid == cgrid)) {
-+				pr_err("CRGID 0x%x is being used by FQID 0x%x,"
-+				       " CGR will be leaked\n",
-+				       cgrid, fq.fqid);
-+				return 1;
-+			}
-+		}
-+		/* Move to the next FQID */
-+		fq.fqid++;
-+	} while (1);
-+}
-+
-+void qman_release_cgrid_range(u32 cgrid, u32 count)
-+{
-+	u32 total_invalid = release_id_range(&cgralloc, cgrid,
-+					     count, cqr_cleanup);
-+	if (total_invalid)
-+		pr_err("CGRID range [%d..%d] (%d) had %d leaks\n",
-+			cgrid, cgrid + count - 1, count, total_invalid);
-+}
-+EXPORT_SYMBOL(qman_release_cgrid_range);
-+
-+void qman_seed_cgrid_range(u32 cgrid, u32 count)
-+{
-+	dpa_alloc_seed(&cgralloc, cgrid, count);
-+
-+}
-+EXPORT_SYMBOL(qman_seed_cgrid_range);
-+
-+/* CEETM CHANNEL ID allocator front-end */
-+int qman_alloc_ceetm0_channel_range(u32 *result, u32 count, u32 align,
-+								 int partial)
-+{
-+	return dpa_alloc_new(&ceetm0_challoc, result, count, align, partial);
-+}
-+EXPORT_SYMBOL(qman_alloc_ceetm0_channel_range);
-+
-+int qman_alloc_ceetm1_channel_range(u32 *result, u32 count, u32 align,
-+								 int partial)
-+{
-+	return dpa_alloc_new(&ceetm1_challoc, result, count, align, partial);
-+}
-+EXPORT_SYMBOL(qman_alloc_ceetm1_channel_range);
-+
-+void qman_release_ceetm0_channel_range(u32 channelid, u32 count)
-+{
-+	u32 total_invalid;
-+
-+	total_invalid = release_id_range(&ceetm0_challoc, channelid, count,
-+									 NULL);
-+	if (total_invalid)
-+		pr_err("CEETM channel range [%d..%d] (%d) had %d leaks\n",
-+			channelid, channelid + count - 1, count, total_invalid);
-+}
-+EXPORT_SYMBOL(qman_release_ceetm0_channel_range);
-+
-+void qman_seed_ceetm0_channel_range(u32 channelid, u32 count)
-+{
-+	dpa_alloc_seed(&ceetm0_challoc, channelid, count);
-+
-+}
-+EXPORT_SYMBOL(qman_seed_ceetm0_channel_range);
-+
-+void qman_release_ceetm1_channel_range(u32 channelid, u32 count)
-+{
-+	u32 total_invalid;
-+	total_invalid = release_id_range(&ceetm1_challoc, channelid, count,
-+									 NULL);
-+	if (total_invalid)
-+		pr_err("CEETM channel range [%d..%d] (%d) had %d leaks\n",
-+			channelid, channelid + count - 1, count, total_invalid);
-+}
-+EXPORT_SYMBOL(qman_release_ceetm1_channel_range);
-+
-+void qman_seed_ceetm1_channel_range(u32 channelid, u32 count)
-+{
-+	dpa_alloc_seed(&ceetm1_challoc, channelid, count);
-+
-+}
-+EXPORT_SYMBOL(qman_seed_ceetm1_channel_range);
-+
-+/* CEETM LFQID allocator front-end */
-+int qman_alloc_ceetm0_lfqid_range(u32 *result, u32 count, u32 align,
-+								 int partial)
-+{
-+	return dpa_alloc_new(&ceetm0_lfqidalloc, result, count, align, partial);
-+}
-+EXPORT_SYMBOL(qman_alloc_ceetm0_lfqid_range);
-+
-+int qman_alloc_ceetm1_lfqid_range(u32 *result, u32 count, u32 align,
-+								 int partial)
-+{
-+	return dpa_alloc_new(&ceetm1_lfqidalloc, result, count, align, partial);
-+}
-+EXPORT_SYMBOL(qman_alloc_ceetm1_lfqid_range);
-+
-+void qman_release_ceetm0_lfqid_range(u32 lfqid, u32 count)
-+{
-+	u32 total_invalid;
-+
-+	total_invalid = release_id_range(&ceetm0_lfqidalloc, lfqid, count,
-+									NULL);
-+	if (total_invalid)
-+		pr_err("CEETM LFQID range [0x%x..0x%x] (%d) had %d leaks\n",
-+			lfqid, lfqid + count - 1, count, total_invalid);
-+}
-+EXPORT_SYMBOL(qman_release_ceetm0_lfqid_range);
-+
-+void qman_seed_ceetm0_lfqid_range(u32 lfqid, u32 count)
-+{
-+	dpa_alloc_seed(&ceetm0_lfqidalloc, lfqid, count);
-+
-+}
-+EXPORT_SYMBOL(qman_seed_ceetm0_lfqid_range);
-+
-+void qman_release_ceetm1_lfqid_range(u32 lfqid, u32 count)
-+{
-+	u32 total_invalid;
-+
-+	total_invalid = release_id_range(&ceetm1_lfqidalloc, lfqid, count,
-+									NULL);
-+	if (total_invalid)
-+		pr_err("CEETM LFQID range [0x%x..0x%x] (%d) had %d leaks\n",
-+			lfqid, lfqid + count - 1, count, total_invalid);
-+}
-+EXPORT_SYMBOL(qman_release_ceetm1_lfqid_range);
-+
-+void qman_seed_ceetm1_lfqid_range(u32 lfqid, u32 count)
-+{
-+	dpa_alloc_seed(&ceetm1_lfqidalloc, lfqid, count);
-+
-+}
-+EXPORT_SYMBOL(qman_seed_ceetm1_lfqid_range);
-+
-+
-+/* Everything else is the common backend to all the allocators */
-+
-+/* The allocator is a (possibly-empty) list of these; */
-+struct alloc_node {
-+	struct list_head list;
-+	u32 base;
-+	u32 num;
-+	/* refcount and is_alloced are only set
-+	   when the node is in the used list */
-+	unsigned int refcount;
-+	int is_alloced;
-+};
-+
-+/* #define DPA_ALLOC_DEBUG */
-+
-+#ifdef DPA_ALLOC_DEBUG
-+#define DPRINT pr_info
-+static void DUMP(struct dpa_alloc *alloc)
-+{
-+	int off = 0;
-+	char buf[256];
-+	struct alloc_node *p;
-+	pr_info("Free Nodes\n");
-+	list_for_each_entry(p, &alloc->free, list) {
-+		if (off < 255)
-+			off += snprintf(buf + off, 255-off, "{%d,%d}",
-+				p->base, p->base + p->num - 1);
-+	}
-+	pr_info("%s\n", buf);
-+
-+	off = 0;
-+	pr_info("Used Nodes\n");
-+	list_for_each_entry(p, &alloc->used, list) {
-+		if (off < 255)
-+			off += snprintf(buf + off, 255-off, "{%d,%d}",
-+				p->base, p->base + p->num - 1);
-+	}
-+	pr_info("%s\n", buf);
-+
-+
-+
-+}
-+#else
-+#define DPRINT(x...)
-+#define DUMP(a)
-+#endif
-+
-+int dpa_alloc_new(struct dpa_alloc *alloc, u32 *result, u32 count, u32 align,
-+		  int partial)
-+{
-+	struct alloc_node *i = NULL, *next_best = NULL, *used_node = NULL;
-+	u32 base, next_best_base = 0, num = 0, next_best_num = 0;
-+	struct alloc_node *margin_left, *margin_right;
-+
-+	*result = (u32)-1;
-+	DPRINT("alloc_range(%d,%d,%d)\n", count, align, partial);
-+	DUMP(alloc);
-+	/* If 'align' is 0, it should behave as though it was 1 */
-+	if (!align)
-+		align = 1;
-+	margin_left = kmalloc(sizeof(*margin_left), GFP_KERNEL);
-+	if (!margin_left)
-+		goto err;
-+	margin_right = kmalloc(sizeof(*margin_right), GFP_KERNEL);
-+	if (!margin_right) {
-+		kfree(margin_left);
-+		goto err;
-+	}
-+	spin_lock_irq(&alloc->lock);
-+	list_for_each_entry(i, &alloc->free, list) {
-+		base = (i->base + align - 1) / align;
-+		base *= align;
-+		if ((base - i->base) >= i->num)
-+			/* alignment is impossible, regardless of count */
-+			continue;
-+		num = i->num - (base - i->base);
-+		if (num >= count) {
-+			/* this one will do nicely */
-+			num = count;
-+			goto done;
-+		}
-+		if (num > next_best_num) {
-+			next_best = i;
-+			next_best_base = base;
-+			next_best_num = num;
-+		}
-+	}
-+	if (partial && next_best) {
-+		i = next_best;
-+		base = next_best_base;
-+		num = next_best_num;
-+	} else
-+		i = NULL;
-+done:
-+	if (i) {
-+		if (base != i->base) {
-+			margin_left->base = i->base;
-+			margin_left->num = base - i->base;
-+			list_add_tail(&margin_left->list, &i->list);
-+		} else
-+			kfree(margin_left);
-+		if ((base + num) < (i->base + i->num)) {
-+			margin_right->base = base + num;
-+			margin_right->num = (i->base + i->num) -
-+						(base + num);
-+			list_add(&margin_right->list, &i->list);
-+		} else
-+			kfree(margin_right);
-+		list_del(&i->list);
-+		kfree(i);
-+		*result = base;
-+	} else {
-+		spin_unlock_irq(&alloc->lock);
-+		kfree(margin_left);
-+		kfree(margin_right);
-+	}
-+
-+err:
-+	DPRINT("returning %d\n", i ? num : -ENOMEM);
-+	DUMP(alloc);
-+	if (!i)
-+		return -ENOMEM;
-+
-+	/* Add the allocation to the used list with a refcount of 1 */
-+	used_node = kmalloc(sizeof(*used_node), GFP_KERNEL);
-+	if (!used_node) {
-+		spin_unlock_irq(&alloc->lock);
-+		return -ENOMEM;
-+	}
-+	used_node->base = *result;
-+	used_node->num = num;
-+	used_node->refcount = 1;
-+	used_node->is_alloced = 1;
-+	list_add_tail(&used_node->list, &alloc->used);
-+	spin_unlock_irq(&alloc->lock);
-+	return (int)num;
-+}
-+
-+/* Allocate the list node using GFP_ATOMIC, because we *really* want to avoid
-+ * forcing error-handling on to users in the deallocation path. */
-+static void _dpa_alloc_free(struct dpa_alloc *alloc, u32 base_id, u32 count)
-+{
-+	struct alloc_node *i, *node = kmalloc(sizeof(*node), GFP_ATOMIC);
-+	BUG_ON(!node);
-+	DPRINT("release_range(%d,%d)\n", base_id, count);
-+	DUMP(alloc);
-+	BUG_ON(!count);
-+	spin_lock_irq(&alloc->lock);
-+
-+
-+	node->base = base_id;
-+	node->num = count;
-+	list_for_each_entry(i, &alloc->free, list) {
-+		if (i->base >= node->base) {
-+			/* BUG_ON(any overlapping) */
-+			BUG_ON(i->base < (node->base + node->num));
-+			list_add_tail(&node->list, &i->list);
-+			goto done;
-+		}
-+	}
-+	list_add_tail(&node->list, &alloc->free);
-+done:
-+	/* Merge to the left */
-+	i = list_entry(node->list.prev, struct alloc_node, list);
-+	if (node->list.prev != &alloc->free) {
-+		BUG_ON((i->base + i->num) > node->base);
-+		if ((i->base + i->num) == node->base) {
-+			node->base = i->base;
-+			node->num += i->num;
-+			list_del(&i->list);
-+			kfree(i);
-+		}
-+	}
-+	/* Merge to the right */
-+	i = list_entry(node->list.next, struct alloc_node, list);
-+	if (node->list.next != &alloc->free) {
-+		BUG_ON((node->base + node->num) > i->base);
-+		if ((node->base + node->num) == i->base) {
-+			node->num += i->num;
-+			list_del(&i->list);
-+			kfree(i);
-+		}
-+	}
-+	spin_unlock_irq(&alloc->lock);
-+	DUMP(alloc);
-+}
-+
-+
-+void dpa_alloc_free(struct dpa_alloc *alloc, u32 base_id, u32 count)
-+{
-+	struct alloc_node *i = NULL;
-+	spin_lock_irq(&alloc->lock);
-+
-+	/* First find the node in the used list and decrement its ref count */
-+	list_for_each_entry(i, &alloc->used, list) {
-+		if (i->base == base_id && i->num == count) {
-+			--i->refcount;
-+			if (i->refcount == 0) {
-+				list_del(&i->list);
-+				spin_unlock_irq(&alloc->lock);
-+				if (i->is_alloced)
-+					_dpa_alloc_free(alloc, base_id, count);
-+				kfree(i);
-+				return;
-+			}
-+			spin_unlock_irq(&alloc->lock);
-+			return;
-+		}
-+	}
-+	/* Couldn't find the allocation */
-+	pr_err("Attempt to free ID 0x%x COUNT %d that wasn't alloc'd or reserved\n",
-+	       base_id, count);
-+	spin_unlock_irq(&alloc->lock);
-+}
-+
-+void dpa_alloc_seed(struct dpa_alloc *alloc, u32 base_id, u32 count)
-+{
-+	/* Same as free but no previous allocation checking is needed */
-+	_dpa_alloc_free(alloc, base_id, count);
-+}
-+
-+
-+int dpa_alloc_reserve(struct dpa_alloc *alloc, u32 base, u32 num)
-+{
-+	struct alloc_node *i = NULL, *used_node;
-+
-+	DPRINT("alloc_reserve(%d,%d)\n", base, num);
-+	DUMP(alloc);
-+
-+	spin_lock_irq(&alloc->lock);
-+
-+	/* Check for the node in the used list.
-+	   If found, increase it's refcount */
-+	list_for_each_entry(i, &alloc->used, list) {
-+		if ((i->base == base) && (i->num == num)) {
-+			++i->refcount;
-+			spin_unlock_irq(&alloc->lock);
-+			return 0;
-+		}
-+		if ((base >= i->base) && (base < (i->base + i->num))) {
-+			/* This is an attempt to reserve a region that was
-+			   already reserved or alloced with a different
-+			   base or num */
-+			pr_err("Cannot reserve %d - %d, it overlaps with"
-+			       " existing reservation from %d - %d\n",
-+			       base, base + num - 1, i->base,
-+			       i->base + i->num - 1);
-+			spin_unlock_irq(&alloc->lock);
-+			return -1;
-+		}
-+	}
-+	/* Check to make sure this ID isn't in the free list */
-+	list_for_each_entry(i, &alloc->free, list) {
-+		if ((base >= i->base) && (base < (i->base + i->num))) {
-+			/* yep, the reservation is within this node */
-+			pr_err("Cannot reserve %d - %d, it overlaps with"
-+			       " free range %d - %d and must be alloced\n",
-+			       base, base + num - 1,
-+			       i->base, i->base + i->num - 1);
-+			spin_unlock_irq(&alloc->lock);
-+			return -1;
-+		}
-+	}
-+	/* Add the allocation to the used list with a refcount of 1 */
-+	used_node = kmalloc(sizeof(*used_node), GFP_KERNEL);
-+	if (!used_node) {
-+		spin_unlock_irq(&alloc->lock);
-+		return -ENOMEM;
-+
-+	}
-+	used_node->base = base;
-+	used_node->num = num;
-+	used_node->refcount = 1;
-+	used_node->is_alloced = 0;
-+	list_add_tail(&used_node->list, &alloc->used);
-+	spin_unlock_irq(&alloc->lock);
-+	return 0;
-+}
-+
-+
-+int dpa_alloc_pop(struct dpa_alloc *alloc, u32 *result, u32 *count)
-+{
-+	struct alloc_node *i = NULL;
-+	DPRINT("alloc_pop()\n");
-+	DUMP(alloc);
-+	spin_lock_irq(&alloc->lock);
-+	if (!list_empty(&alloc->free)) {
-+		i = list_entry(alloc->free.next, struct alloc_node, list);
-+		list_del(&i->list);
-+	}
-+	spin_unlock_irq(&alloc->lock);
-+	DPRINT("returning %d\n", i ? 0 : -ENOMEM);
-+	DUMP(alloc);
-+	if (!i)
-+		return -ENOMEM;
-+	*result = i->base;
-+	*count = i->num;
-+	kfree(i);
-+	return 0;
-+}
-+
-+int dpa_alloc_check(struct dpa_alloc *list_head, u32 item)
-+{
-+	struct alloc_node *i = NULL;
-+	int res = 0;
-+	DPRINT("alloc_check()\n");
-+	spin_lock_irq(&list_head->lock);
-+
-+	list_for_each_entry(i, &list_head->free, list) {
-+		if ((item >= i->base) && (item < (i->base + i->num))) {
-+			res = 1;
-+			break;
-+		}
-+	}
-+	spin_unlock_irq(&list_head->lock);
-+	return res;
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/dpa_sys.h
-@@ -0,0 +1,259 @@
-+/* Copyright 2008-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef DPA_SYS_H
-+#define DPA_SYS_H
-+
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/io.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/bootmem.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_address.h>
-+#include <linux/of_irq.h>
-+#include <linux/kthread.h>
-+#include <linux/memblock.h>
-+#include <linux/completion.h>
-+#include <linux/log2.h>
-+#include <linux/types.h>
-+#include <linux/ioctl.h>
-+#include <linux/miscdevice.h>
-+#include <linux/uaccess.h>
-+#include <linux/debugfs.h>
-+#include <linux/seq_file.h>
-+#include <linux/device.h>
-+#include <linux/uio_driver.h>
-+#include <linux/smp.h>
-+#include <linux/fsl_hypervisor.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ctype.h>
-+#include <linux/math64.h>
-+#include <linux/bitops.h>
-+
-+#include <linux/fsl_usdpaa.h>
-+
-+/* When copying aligned words or shorts, try to avoid memcpy() */
-+#define CONFIG_TRY_BETTER_MEMCPY
-+
-+/* For 2-element tables related to cache-inhibited and cache-enabled mappings */
-+#define DPA_PORTAL_CE 0
-+#define DPA_PORTAL_CI 1
-+
-+/***********************/
-+/* Misc inline assists */
-+/***********************/
-+
-+#if defined CONFIG_PPC32
-+#include "dpa_sys_ppc32.h"
-+#elif defined CONFIG_PPC64
-+#include "dpa_sys_ppc64.h"
-+#elif defined CONFIG_ARM
-+#include "dpa_sys_arm.h"
-+#elif defined CONFIG_ARM64
-+#include "dpa_sys_arm64.h"
-+#endif
-+
-+
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+#define DPA_ASSERT(x) \
-+	do { \
-+		if (!(x)) { \
-+			pr_crit("ASSERT: (%s:%d) %s\n", __FILE__, __LINE__, \
-+				__stringify_1(x)); \
-+			dump_stack(); \
-+			panic("assertion failure"); \
-+		} \
-+	} while (0)
-+#else
-+#define DPA_ASSERT(x)
-+#endif
-+
-+/* memcpy() stuff - when you know alignments in advance */
-+#ifdef CONFIG_TRY_BETTER_MEMCPY
-+static inline void copy_words(void *dest, const void *src, size_t sz)
-+{
-+	u32 *__dest = dest;
-+	const u32 *__src = src;
-+	size_t __sz = sz >> 2;
-+	BUG_ON((unsigned long)dest & 0x3);
-+	BUG_ON((unsigned long)src & 0x3);
-+	BUG_ON(sz & 0x3);
-+	while (__sz--)
-+		*(__dest++) = *(__src++);
-+}
-+static inline void copy_shorts(void *dest, const void *src, size_t sz)
-+{
-+	u16 *__dest = dest;
-+	const u16 *__src = src;
-+	size_t __sz = sz >> 1;
-+	BUG_ON((unsigned long)dest & 0x1);
-+	BUG_ON((unsigned long)src & 0x1);
-+	BUG_ON(sz & 0x1);
-+	while (__sz--)
-+		*(__dest++) = *(__src++);
-+}
-+static inline void copy_bytes(void *dest, const void *src, size_t sz)
-+{
-+	u8 *__dest = dest;
-+	const u8 *__src = src;
-+	while (sz--)
-+		*(__dest++) = *(__src++);
-+}
-+#else
-+#define copy_words memcpy
-+#define copy_shorts memcpy
-+#define copy_bytes memcpy
-+#endif
-+
-+/************/
-+/* RB-trees */
-+/************/
-+
-+/* We encapsulate RB-trees so that its easier to use non-linux forms in
-+ * non-linux systems. This also encapsulates the extra plumbing that linux code
-+ * usually provides when using RB-trees. This encapsulation assumes that the
-+ * data type held by the tree is u32. */
-+
-+struct dpa_rbtree {
-+	struct rb_root root;
-+};
-+#define DPA_RBTREE { .root = RB_ROOT }
-+
-+static inline void dpa_rbtree_init(struct dpa_rbtree *tree)
-+{
-+	tree->root = RB_ROOT;
-+}
-+
-+#define IMPLEMENT_DPA_RBTREE(name, type, node_field, val_field) \
-+static inline int name##_push(struct dpa_rbtree *tree, type *obj) \
-+{ \
-+	struct rb_node *parent = NULL, **p = &tree->root.rb_node; \
-+	while (*p) { \
-+		u32 item; \
-+		parent = *p; \
-+		item = rb_entry(parent, type, node_field)->val_field; \
-+		if (obj->val_field < item) \
-+			p = &parent->rb_left; \
-+		else if (obj->val_field > item) \
-+			p = &parent->rb_right; \
-+		else \
-+			return -EBUSY; \
-+	} \
-+	rb_link_node(&obj->node_field, parent, p); \
-+	rb_insert_color(&obj->node_field, &tree->root); \
-+	return 0; \
-+} \
-+static inline void name##_del(struct dpa_rbtree *tree, type *obj) \
-+{ \
-+	rb_erase(&obj->node_field, &tree->root); \
-+} \
-+static inline type *name##_find(struct dpa_rbtree *tree, u32 val) \
-+{ \
-+	type *ret; \
-+	struct rb_node *p = tree->root.rb_node; \
-+	while (p) { \
-+		ret = rb_entry(p, type, node_field); \
-+		if (val < ret->val_field) \
-+			p = p->rb_left; \
-+		else if (val > ret->val_field) \
-+			p = p->rb_right; \
-+		else \
-+			return ret; \
-+	} \
-+	return NULL; \
-+}
-+
-+/************/
-+/* Bootargs */
-+/************/
-+
-+/* Qman has "qportals=" and Bman has "bportals=", they use the same syntax
-+ * though; a comma-separated list of items, each item being a cpu index and/or a
-+ * range of cpu indices, and each item optionally be prefixed by "s" to indicate
-+ * that the portal associated with that cpu should be shared. See bman_driver.c
-+ * for more specifics. */
-+static int __parse_portals_cpu(const char **s, unsigned int *cpu)
-+{
-+	*cpu = 0;
-+	if (!isdigit(**s))
-+		return -EINVAL;
-+	while (isdigit(**s))
-+		*cpu = *cpu * 10 + (*((*s)++) - '0');
-+	return 0;
-+}
-+static inline int parse_portals_bootarg(char *str, struct cpumask *want_shared,
-+					struct cpumask *want_unshared,
-+					const char *argname)
-+{
-+	const char *s = str;
-+	unsigned int shared, cpu1, cpu2, loop;
-+
-+keep_going:
-+	if (*s == 's') {
-+		shared = 1;
-+		s++;
-+	} else
-+		shared = 0;
-+	if (__parse_portals_cpu(&s, &cpu1))
-+		goto err;
-+	if (*s == '-') {
-+		s++;
-+		if (__parse_portals_cpu(&s, &cpu2))
-+			goto err;
-+		if (cpu2 < cpu1)
-+			goto err;
-+	} else
-+		cpu2 = cpu1;
-+	for (loop = cpu1; loop <= cpu2; loop++)
-+		cpumask_set_cpu(loop, shared ? want_shared : want_unshared);
-+	if (*s == ',') {
-+		s++;
-+		goto keep_going;
-+	} else if ((*s == '\0') || isspace(*s))
-+		return 0;
-+err:
-+	pr_crit("Malformed %s argument: %s, offset: %lu\n", argname, str,
-+		(unsigned long)s - (unsigned long)str);
-+	return -EINVAL;
-+}
-+#ifdef CONFIG_FSL_USDPAA
-+/* Hooks from fsl_usdpaa_irq.c to fsl_usdpaa.c */
-+int usdpaa_get_portal_config(struct file *filp, void *cinh,
-+			     enum usdpaa_portal_type ptype, unsigned int *irq,
-+			     void **iir_reg);
-+#endif
-+#endif /* DPA_SYS_H */
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/dpa_sys_arm.h
-@@ -0,0 +1,95 @@
-+/* Copyright 2016 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef DPA_SYS_ARM_H
-+#define DPA_SYS_ARM_H
-+
-+#include <asm/cacheflush.h>
-+#include <asm/barrier.h>
-+
-+/* Implementation of ARM specific routines */
-+
-+/* TODO: NB, we currently assume that hwsync() and lwsync() imply compiler
-+ * barriers and that dcb*() won't fall victim to compiler or execution
-+ * reordering with respect to other code/instructions that manipulate the same
-+ * cacheline. */
-+#define hwsync() { asm volatile("dmb st" : : : "memory"); }
-+#define lwsync() { asm volatile("dmb st" : : : "memory"); }
-+#define dcbf(p) { asm volatile("mcr p15, 0, %0, c7, c10, 1" : : "r" (p) : "memory"); }
-+#define dcbt_ro(p) { asm volatile("pld [%0, #64];": : "r" (p)); }
-+#define dcbt_rw(p) { asm volatile("pldw [%0, #64];": : "r" (p)); }
-+#define dcbi(p) { asm volatile("mcr p15, 0, %0, c7, c6, 1" : : "r" (p) : "memory"); }
-+
-+#define dcbz_64(p) { memset(p, 0, sizeof(*p)); }
-+
-+#define dcbf_64(p) \
-+	do { \
-+		dcbf((u32)p); \
-+	} while (0)
-+/* Commonly used combo */
-+#define dcbit_ro(p) \
-+	do { \
-+		dcbi((u32)p); \
-+		dcbt_ro((u32)p); \
-+	} while (0)
-+
-+static inline u64 mfatb(void)
-+{
-+	return get_cycles();
-+}
-+
-+static inline u32 in_be32(volatile void *addr)
-+{
-+	return be32_to_cpu(*((volatile u32 *) addr));
-+}
-+
-+static inline void out_be32(void *addr, u32 val)
-+{
-+	*((u32 *) addr) = cpu_to_be32(val);
-+}
-+
-+
-+static inline void set_bits(unsigned long mask, volatile unsigned long *p)
-+{
-+	*p |= mask;
-+}
-+static inline void clear_bits(unsigned long mask, volatile unsigned long *p)
-+{
-+	*p &= ~mask;
-+}
-+
-+static inline void flush_dcache_range(unsigned long start, unsigned long stop)
-+{
-+	__cpuc_flush_dcache_area((void *) start, stop - start);
-+}
-+
-+#define hard_smp_processor_id() raw_smp_processor_id()
-+#endif
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/dpa_sys_arm64.h
-@@ -0,0 +1,102 @@
-+/* Copyright 2014 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef DPA_SYS_ARM64_H
-+#define DPA_SYS_ARM64_H
-+
-+#include <asm/cacheflush.h>
-+#include <asm/barrier.h>
-+
-+/* Implementation of ARM 64 bit specific routines */
-+
-+/* TODO: NB, we currently assume that hwsync() and lwsync() imply compiler
-+ * barriers and that dcb*() won't fall victim to compiler or execution
-+ * reordering with respect to other code/instructions that manipulate the same
-+ * cacheline. */
-+#define hwsync() { asm volatile("dmb st" : : : "memory"); }
-+#define lwsync() { asm volatile("dmb st" : : : "memory"); }
-+#define dcbf(p) { asm volatile("dc cvac, %0;" : : "r" (p) : "memory"); }
-+#define dcbt_ro(p) { asm volatile("prfm pldl1keep, [%0, #0]" : : "r" (p)); }
-+#define dcbt_rw(p) { asm volatile("prfm pstl1keep, [%0, #0]" : : "r" (p)); }
-+#define dcbi(p) { asm volatile("dc ivac, %0" : : "r"(p) : "memory"); }
-+#define dcbz(p) { asm volatile("dc zva, %0" : : "r" (p) : "memory"); }
-+
-+#define dcbz_64(p) \
-+	do { \
-+		dcbz(p);	\
-+	} while (0)
-+
-+#define dcbf_64(p) \
-+	do { \
-+		dcbf(p); \
-+	} while (0)
-+/* Commonly used combo */
-+#define dcbit_ro(p) \
-+	do { \
-+		dcbi(p); \
-+		dcbt_ro(p); \
-+	} while (0)
-+
-+static inline u64 mfatb(void)
-+{
-+	return get_cycles();
-+}
-+
-+static inline u32 in_be32(volatile void *addr)
-+{
-+	return be32_to_cpu(*((volatile u32 *) addr));
-+}
-+
-+static inline void out_be32(void *addr, u32 val)
-+{
-+	*((u32 *) addr) = cpu_to_be32(val);
-+}
-+
-+
-+static inline void set_bits(unsigned long mask, volatile unsigned long *p)
-+{
-+	*p |= mask;
-+}
-+static inline void clear_bits(unsigned long mask, volatile unsigned long *p)
-+{
-+	*p &= ~mask;
-+}
-+
-+static inline void flush_dcache_range(unsigned long start, unsigned long stop)
-+{
-+	__flush_dcache_area((void *) start, stop - start);
-+}
-+
-+#define hard_smp_processor_id() raw_smp_processor_id()
-+
-+
-+
-+#endif
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/dpa_sys_ppc32.h
-@@ -0,0 +1,70 @@
-+/* Copyright 2014 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef DPA_SYS_PPC32_H
-+#define DPA_SYS_PPC32_H
-+
-+/* Implementation of PowerPC 32 bit specific routines */
-+
-+/* TODO: NB, we currently assume that hwsync() and lwsync() imply compiler
-+ * barriers and that dcb*() won't fall victim to compiler or execution
-+ * reordering with respect to other code/instructions that manipulate the same
-+ * cacheline. */
-+#define hwsync() __asm__ __volatile__ ("sync" : : : "memory")
-+#define lwsync() __asm__ __volatile__ (stringify_in_c(LWSYNC) : : : "memory")
-+#define dcbf(p) __asm__ __volatile__ ("dcbf 0,%0" : : "r" (p) : "memory")
-+#define dcbt_ro(p) __asm__ __volatile__ ("dcbt 0,%0" : : "r" (p))
-+#define dcbt_rw(p) __asm__ __volatile__ ("dcbtst 0,%0" : : "r" (p))
-+#define dcbi(p) dcbf(p)
-+
-+#define dcbzl(p) __asm__ __volatile__ ("dcbzl 0,%0" : : "r" (p))
-+#define dcbz_64(p) dcbzl(p)
-+#define dcbf_64(p) dcbf(p)
-+
-+/* Commonly used combo */
-+#define dcbit_ro(p) \
-+	do { \
-+		dcbi(p); \
-+		dcbt_ro(p); \
-+	} while (0)
-+
-+static inline u64 mfatb(void)
-+{
-+	u32 hi, lo, chk;
-+	do {
-+		hi = mfspr(SPRN_ATBU);
-+		lo = mfspr(SPRN_ATBL);
-+		chk = mfspr(SPRN_ATBU);
-+	} while (unlikely(hi != chk));
-+	return ((u64)hi << 32) | (u64)lo;
-+}
-+
-+#endif
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/dpa_sys_ppc64.h
-@@ -0,0 +1,79 @@
-+/* Copyright 2014 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef DPA_SYS_PPC64_H
-+#define DPA_SYS_PPC64_H
-+
-+/* Implementation of PowerPC 64 bit specific routines */
-+
-+/* TODO: NB, we currently assume that hwsync() and lwsync() imply compiler
-+ * barriers and that dcb*() won't fall victim to compiler or execution
-+ * reordering with respect to other code/instructions that manipulate the same
-+ * cacheline. */
-+#define hwsync() __asm__ __volatile__ ("sync" : : : "memory")
-+#define lwsync() __asm__ __volatile__ (stringify_in_c(LWSYNC) : : : "memory")
-+#define dcbf(p) __asm__ __volatile__ ("dcbf 0,%0" : : "r" (p) : "memory")
-+#define dcbt_ro(p) __asm__ __volatile__ ("dcbt 0,%0" : : "r" (p))
-+#define dcbt_rw(p) __asm__ __volatile__ ("dcbtst 0,%0" : : "r" (p))
-+#define dcbi(p) dcbf(p)
-+
-+#define dcbz(p) __asm__ __volatile__ ("dcbz 0,%0" : : "r" (p))
-+#define dcbz_64(p) \
-+	do { \
-+		dcbz((void*)p + 32);	\
-+		dcbz(p);	\
-+	} while (0)
-+#define dcbf_64(p) \
-+	do { \
-+		dcbf((void*)p + 32); \
-+		dcbf(p); \
-+	} while (0)
-+/* Commonly used combo */
-+#define dcbit_ro(p) \
-+	do { \
-+		dcbi(p); \
-+		dcbi((void*)p + 32); \
-+		dcbt_ro(p); \
-+		dcbt_ro((void*)p + 32); \
-+	} while (0)
-+
-+static inline u64 mfatb(void)
-+{
-+	u32 hi, lo, chk;
-+	do {
-+		hi = mfspr(SPRN_ATBU);
-+		lo = mfspr(SPRN_ATBL);
-+		chk = mfspr(SPRN_ATBU);
-+	} while (unlikely(hi != chk));
-+	return ((u64)hi << 32) | (u64)lo;
-+}
-+
-+#endif
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/fsl_usdpaa.c
-@@ -0,0 +1,1984 @@
-+/* Copyright (C) 2008-2012 Freescale Semiconductor, Inc.
-+ * Authors: Andy Fleming <afleming@freescale.com>
-+ *	    Timur Tabi <timur@freescale.com>
-+ *	    Geoff Thorpe <Geoff.Thorpe@freescale.com>
-+ *
-+ * This file is licensed under the terms of the GNU General Public License
-+ * version 2.  This program is licensed "as is" without any warranty of any
-+ * kind, whether express or implied.
-+ */
-+
-+
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
-+#include <linux/cdev.h>
-+#include <linux/mm.h>
-+#include <linux/of.h>
-+#include <linux/memblock.h>
-+#include <linux/slab.h>
-+#include <linux/mman.h>
-+#include <linux/of_reserved_mem.h>
-+
-+#if !(defined(CONFIG_ARM) || defined(CONFIG_ARM64))
-+#include <mm/mmu_decl.h>
-+#endif
-+
-+#include "dpa_sys.h"
-+#include <linux/fsl_usdpaa.h>
-+#include "bman_low.h"
-+#include "qman_low.h"
-+
-+/* Physical address range of the memory reservation, exported for mm/mem.c */
-+static u64 phys_start;
-+static u64 phys_size;
-+static u64 arg_phys_size;
-+
-+/* PFN versions of the above */
-+static unsigned long pfn_start;
-+static unsigned long pfn_size;
-+
-+/* Memory reservations are manipulated under this spinlock (which is why 'refs'
-+ * isn't atomic_t). */
-+static DEFINE_SPINLOCK(mem_lock);
-+
-+/* The range of TLB1 indices */
-+static unsigned int first_tlb;
-+static unsigned int num_tlb = 1;
-+static unsigned int current_tlb; /* loops around for fault handling */
-+
-+/* Memory reservation is represented as a list of 'mem_fragment's, some of which
-+ * may be mapped. Unmapped fragments are always merged where possible. */
-+static LIST_HEAD(mem_list);
-+
-+struct mem_mapping;
-+
-+/* Memory fragments are in 'mem_list'. */
-+struct mem_fragment {
-+	u64 base;
-+	u64 len;
-+	unsigned long pfn_base; /* PFN version of 'base' */
-+	unsigned long pfn_len; /* PFN version of 'len' */
-+	unsigned int refs; /* zero if unmapped */
-+	u64 root_len; /* Size of the orignal fragment */
-+	unsigned long root_pfn; /* PFN of the orignal fragment */
-+	struct list_head list;
-+	/* if mapped, flags+name captured at creation time */
-+	u32 flags;
-+	char name[USDPAA_DMA_NAME_MAX];
-+	u64 map_len;
-+	/* support multi-process locks per-memory-fragment. */
-+	int has_locking;
-+	wait_queue_head_t wq;
-+	struct mem_mapping *owner;
-+};
-+
-+/* Mappings of memory fragments in 'struct ctx'. These are created from
-+ * ioctl(USDPAA_IOCTL_DMA_MAP), though the actual mapping then happens via a
-+ * mmap(). */
-+struct mem_mapping {
-+	struct mem_fragment *root_frag;
-+	u32 frag_count;
-+	u64 total_size;
-+	struct list_head list;
-+	int refs;
-+	void *virt_addr;
-+};
-+
-+struct portal_mapping {
-+	struct usdpaa_ioctl_portal_map user;
-+	union {
-+		struct qm_portal_config *qportal;
-+		struct bm_portal_config *bportal;
-+	};
-+	/* Declare space for the portals in case the process
-+	   exits unexpectedly and needs to be cleaned by the kernel */
-+	union {
-+		struct qm_portal qman_portal_low;
-+		struct bm_portal bman_portal_low;
-+	};
-+	struct list_head list;
-+	struct resource *phys;
-+	struct iommu_domain *iommu_domain;
-+};
-+
-+/* Track the DPAA resources the process is using */
-+struct active_resource {
-+	struct list_head list;
-+	u32 id;
-+	u32 num;
-+	unsigned int refcount;
-+};
-+
-+/* Per-FD state (which should also be per-process but we don't enforce that) */
-+struct ctx {
-+	/* Lock to protect the context */
-+	spinlock_t lock;
-+	/* Allocated resources get put here for accounting */
-+	struct list_head resources[usdpaa_id_max];
-+	/* list of DMA maps */
-+	struct list_head maps;
-+	/* list of portal maps */
-+	struct list_head portals;
-+};
-+
-+/* Different resource classes */
-+static const struct alloc_backend {
-+	enum usdpaa_id_type id_type;
-+	int (*alloc)(u32 *, u32, u32, int);
-+	void (*release)(u32 base, unsigned int count);
-+	int (*reserve)(u32 base, unsigned int count);
-+	const char *acronym;
-+} alloc_backends[] = {
-+	{
-+		.id_type = usdpaa_id_fqid,
-+		.alloc = qman_alloc_fqid_range,
-+		.release = qman_release_fqid_range,
-+		.reserve = qman_reserve_fqid_range,
-+		.acronym = "FQID"
-+	},
-+	{
-+		.id_type = usdpaa_id_bpid,
-+		.alloc = bman_alloc_bpid_range,
-+		.release = bman_release_bpid_range,
-+		.reserve = bman_reserve_bpid_range,
-+		.acronym = "BPID"
-+	},
-+	{
-+		.id_type = usdpaa_id_qpool,
-+		.alloc = qman_alloc_pool_range,
-+		.release = qman_release_pool_range,
-+		.reserve = qman_reserve_pool_range,
-+		.acronym = "QPOOL"
-+	},
-+	{
-+		.id_type = usdpaa_id_cgrid,
-+		.alloc = qman_alloc_cgrid_range,
-+		.release = qman_release_cgrid_range,
-+		.acronym = "CGRID"
-+	},
-+	{
-+		.id_type = usdpaa_id_ceetm0_lfqid,
-+		.alloc = qman_alloc_ceetm0_lfqid_range,
-+		.release = qman_release_ceetm0_lfqid_range,
-+		.acronym = "CEETM0_LFQID"
-+	},
-+	{
-+		.id_type = usdpaa_id_ceetm0_channelid,
-+		.alloc = qman_alloc_ceetm0_channel_range,
-+		.release = qman_release_ceetm0_channel_range,
-+		.acronym = "CEETM0_LFQID"
-+	},
-+	{
-+		.id_type = usdpaa_id_ceetm1_lfqid,
-+		.alloc = qman_alloc_ceetm1_lfqid_range,
-+		.release = qman_release_ceetm1_lfqid_range,
-+		.acronym = "CEETM1_LFQID"
-+	},
-+	{
-+		.id_type = usdpaa_id_ceetm1_channelid,
-+		.alloc = qman_alloc_ceetm1_channel_range,
-+		.release = qman_release_ceetm1_channel_range,
-+		.acronym = "CEETM1_LFQID"
-+	},
-+	{
-+		/* This terminates the array */
-+		.id_type = usdpaa_id_max
-+	}
-+};
-+
-+/* Determines the largest acceptable page size for a given size
-+   The sizes are determined by what the TLB1 acceptable page sizes are */
-+static u32 largest_page_size(u32 size)
-+{
-+	int shift = 30; /* Start at 1G size */
-+	if (size < 4096)
-+		return 0;
-+	do {
-+		if (size >= (1<<shift))
-+			return 1<<shift;
-+		shift -= 2;
-+	} while (shift >= 12); /* Up to 4k */
-+	return 0;
-+}
-+
-+/* Determine if value is power of 4 */
-+static inline bool is_power_of_4(u64 x)
-+{
-+	if (x == 0 || ((x & (x - 1)) != 0))
-+		return false;
-+	return !!(x & 0x5555555555555555ull);
-+}
-+
-+/* Helper for ioctl_dma_map() when we have a larger fragment than we need. This
-+ * splits the fragment into 4 and returns the upper-most. (The caller can loop
-+ * until it has a suitable fragment size.) */
-+static struct mem_fragment *split_frag(struct mem_fragment *frag)
-+{
-+	struct mem_fragment *x[3];
-+
-+	x[0] = kmalloc(sizeof(struct mem_fragment), GFP_ATOMIC);
-+	x[1] = kmalloc(sizeof(struct mem_fragment), GFP_ATOMIC);
-+	x[2] = kmalloc(sizeof(struct mem_fragment), GFP_ATOMIC);
-+	if (!x[0] || !x[1] || !x[2]) {
-+		kfree(x[0]);
-+		kfree(x[1]);
-+		kfree(x[2]);
-+		return NULL;
-+	}
-+	BUG_ON(frag->refs);
-+	frag->len >>= 2;
-+	frag->pfn_len >>= 2;
-+	x[0]->base = frag->base + frag->len;
-+	x[1]->base = x[0]->base + frag->len;
-+	x[2]->base = x[1]->base + frag->len;
-+	x[0]->len = x[1]->len = x[2]->len = frag->len;
-+	x[0]->pfn_base = frag->pfn_base + frag->pfn_len;
-+	x[1]->pfn_base = x[0]->pfn_base + frag->pfn_len;
-+	x[2]->pfn_base = x[1]->pfn_base + frag->pfn_len;
-+	x[0]->pfn_len = x[1]->pfn_len = x[2]->pfn_len = frag->pfn_len;
-+	x[0]->refs = x[1]->refs = x[2]->refs = 0;
-+	x[0]->root_len = x[1]->root_len = x[2]->root_len = frag->root_len;
-+	x[0]->root_pfn = x[1]->root_pfn = x[2]->root_pfn = frag->root_pfn;
-+	x[0]->name[0] = x[1]->name[0] = x[2]->name[0] = 0;
-+	list_add_tail(&x[0]->list, &frag->list);
-+	list_add_tail(&x[1]->list, &x[0]->list);
-+	list_add_tail(&x[2]->list, &x[1]->list);
-+	return x[2];
-+}
-+
-+static __maybe_unused void dump_frags(void)
-+{
-+	struct mem_fragment *frag;
-+	int i = 0;
-+	list_for_each_entry(frag, &mem_list, list) {
-+		pr_info("FRAG %d: base 0x%llx pfn_base 0x%lx len 0x%llx root_len 0x%llx root_pfn 0x%lx refs %d name %s\n",
-+			i, frag->base, frag->pfn_base,
-+			frag->len, frag->root_len, frag->root_pfn,
-+			frag->refs, frag->name);
-+		++i;
-+	}
-+}
-+
-+/* Walk the list of fragments and adjoin neighbouring segments if possible */
-+static void compress_frags(void)
-+{
-+	/* Walk the fragment list and combine fragments */
-+	struct mem_fragment *frag, *nxtfrag;
-+	u64 len = 0;
-+
-+	int i, numfrags;
-+
-+
-+	frag = list_entry(mem_list.next, struct mem_fragment, list);
-+
-+	while (&frag->list != &mem_list) {
-+		/* Must combine consecutive fragemenst with
-+		   same root_pfn such that they are power of 4 */
-+		if (frag->refs != 0) {
-+			frag = list_entry(frag->list.next,
-+					  struct mem_fragment, list);
-+			continue; /* Not this window */
-+		}
-+		len = frag->len;
-+		numfrags = 0;
-+		nxtfrag =  list_entry(frag->list.next,
-+				      struct mem_fragment, list);
-+		while (true) {
-+			if (&nxtfrag->list == &mem_list) {
-+				numfrags = 0;
-+				break; /* End of list */
-+			}
-+			if (nxtfrag->refs) {
-+				numfrags = 0;
-+				break; /* In use still */
-+			}
-+			if (nxtfrag->root_pfn != frag->root_pfn) {
-+				numfrags = 0;
-+				break; /* Crosses root fragment boundary */
-+			}
-+			len += nxtfrag->len;
-+			numfrags++;
-+			if (is_power_of_4(len)) {
-+				/* These fragments can be combined */
-+				break;
-+			}
-+			nxtfrag =  list_entry(nxtfrag->list.next,
-+					      struct mem_fragment, list);
-+		}
-+		if (numfrags == 0) {
-+			frag = list_entry(frag->list.next,
-+					  struct mem_fragment, list);
-+			continue; /* try the next window */
-+		}
-+		for (i = 0; i < numfrags; i++) {
-+			struct mem_fragment *todel =
-+				list_entry(nxtfrag->list.prev,
-+					   struct mem_fragment, list);
-+			nxtfrag->len += todel->len;
-+			nxtfrag->pfn_len += todel->pfn_len;
-+			list_del(&todel->list);
-+		}
-+		/* Re evaluate the list, things may merge now */
-+		frag = list_entry(mem_list.next, struct mem_fragment, list);
-+	}
-+}
-+
-+/* Hook from arch/powerpc/mm/mem.c */
-+int usdpaa_test_fault(unsigned long pfn, u64 *phys_addr, u64 *size)
-+{
-+	struct mem_fragment *frag;
-+	int idx = -1;
-+	if ((pfn < pfn_start) || (pfn >= (pfn_start + pfn_size)))
-+		return -1;
-+	/* It's in-range, we need to find the fragment */
-+	spin_lock(&mem_lock);
-+	list_for_each_entry(frag, &mem_list, list) {
-+		if ((pfn >= frag->pfn_base) && (pfn < (frag->pfn_base +
-+						       frag->pfn_len))) {
-+			*phys_addr = frag->base;
-+			*size = frag->len;
-+			idx = current_tlb++;
-+			if (current_tlb >= (first_tlb + num_tlb))
-+				current_tlb = first_tlb;
-+			break;
-+		}
-+	}
-+	spin_unlock(&mem_lock);
-+	return idx;
-+}
-+
-+static int usdpaa_open(struct inode *inode, struct file *filp)
-+{
-+	const struct alloc_backend *backend = &alloc_backends[0];
-+	struct ctx *ctx = kmalloc(sizeof(struct ctx), GFP_KERNEL);
-+	if (!ctx)
-+		return -ENOMEM;
-+	filp->private_data = ctx;
-+
-+	while (backend->id_type != usdpaa_id_max) {
-+		INIT_LIST_HEAD(&ctx->resources[backend->id_type]);
-+		backend++;
-+	}
-+
-+	INIT_LIST_HEAD(&ctx->maps);
-+	INIT_LIST_HEAD(&ctx->portals);
-+	spin_lock_init(&ctx->lock);
-+
-+	//filp->f_mapping->backing_dev_info = &directly_mappable_cdev_bdi;
-+
-+	return 0;
-+}
-+
-+#define DQRR_MAXFILL 15
-+
-+/* Reset a QMan portal to its default state */
-+static int init_qm_portal(struct qm_portal_config *config,
-+			  struct qm_portal *portal)
-+{
-+	const struct qm_dqrr_entry *dqrr = NULL;
-+	int i;
-+
-+	portal->addr.addr_ce = config->addr_virt[DPA_PORTAL_CE];
-+	portal->addr.addr_ci = config->addr_virt[DPA_PORTAL_CI];
-+
-+	/* Make sure interrupts are inhibited */
-+	qm_out(IIR, 1);
-+
-+	/* Initialize the DQRR.  This will stop any dequeue
-+	   commands that are in progress */
-+	if (qm_dqrr_init(portal, config, qm_dqrr_dpush, qm_dqrr_pvb,
-+			 qm_dqrr_cdc, DQRR_MAXFILL)) {
-+		pr_err("qm_dqrr_init() failed when trying to"
-+		       " recover portal, portal will be leaked\n");
-+		return 1;
-+	}
-+
-+	/* Discard any entries on the DQRR */
-+	/* If we consume the ring twice something is wrong */
-+	for (i = 0; i < DQRR_MAXFILL * 2; i++) {
-+		qm_dqrr_pvb_update(portal);
-+		dqrr = qm_dqrr_current(portal);
-+		if (!dqrr)
-+			break;
-+		qm_dqrr_cdc_consume_1ptr(portal, dqrr, 0);
-+		qm_dqrr_pvb_update(portal);
-+		qm_dqrr_next(portal);
-+	}
-+	/* Initialize the EQCR */
-+	if (qm_eqcr_init(portal, qm_eqcr_pvb,
-+			qm_eqcr_get_ci_stashing(portal), 1)) {
-+		pr_err("Qman EQCR initialisation failed\n");
-+		return 1;
-+	}
-+	/* initialize the MR */
-+	if (qm_mr_init(portal, qm_mr_pvb, qm_mr_cci)) {
-+		pr_err("Qman MR initialisation failed\n");
-+		return 1;
-+	}
-+	qm_mr_pvb_update(portal);
-+	while (qm_mr_current(portal)) {
-+		qm_mr_next(portal);
-+		qm_mr_cci_consume_to_current(portal);
-+		qm_mr_pvb_update(portal);
-+	}
-+
-+	if (qm_mc_init(portal)) {
-+		pr_err("Qman MC initialisation failed\n");
-+		return 1;
-+	}
-+	return 0;
-+}
-+
-+static int init_bm_portal(struct bm_portal_config *config,
-+			  struct bm_portal *portal)
-+{
-+	portal->addr.addr_ce = config->addr_virt[DPA_PORTAL_CE];
-+	portal->addr.addr_ci = config->addr_virt[DPA_PORTAL_CI];
-+
-+	if (bm_rcr_init(portal, bm_rcr_pvb, bm_rcr_cce)) {
-+		pr_err("Bman RCR initialisation failed\n");
-+	return 1;
-+	}
-+	if (bm_mc_init(portal)) {
-+		pr_err("Bman MC initialisation failed\n");
-+		return 1;
-+	}
-+	return 0;
-+}
-+
-+/* Function that will scan all FQ's in the system.  For each FQ that is not
-+   OOS it will call the check_channel helper to determine if the FQ should
-+   be torn down.  If the check_channel helper returns true the FQ will be
-+   transitioned to the OOS state */
-+static int qm_check_and_destroy_fqs(struct qm_portal *portal, void *ctx,
-+				    bool (*check_channel)(void*, u32))
-+{
-+	u32 fq_id = 0;
-+	while (1) {
-+		struct qm_mc_command *mcc;
-+		struct qm_mc_result *mcr;
-+		u8 state;
-+		u32 channel;
-+
-+		/* Determine the channel for the FQID */
-+		mcc = qm_mc_start(portal);
-+		mcc->queryfq.fqid = fq_id;
-+		qm_mc_commit(portal, QM_MCC_VERB_QUERYFQ);
-+		while (!(mcr = qm_mc_result(portal)))
-+			cpu_relax();
-+		DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK)
-+			   == QM_MCR_VERB_QUERYFQ);
-+		if (mcr->result != QM_MCR_RESULT_OK)
-+			break; /* End of valid FQIDs */
-+
-+		channel = mcr->queryfq.fqd.dest.channel;
-+		/* Determine the state of the FQID */
-+		mcc = qm_mc_start(portal);
-+		mcc->queryfq_np.fqid = fq_id;
-+		qm_mc_commit(portal, QM_MCC_VERB_QUERYFQ_NP);
-+		while (!(mcr = qm_mc_result(portal)))
-+			cpu_relax();
-+		DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK)
-+			   == QM_MCR_VERB_QUERYFQ_NP);
-+		state = mcr->queryfq_np.state & QM_MCR_NP_STATE_MASK;
-+		if (state == QM_MCR_NP_STATE_OOS)
-+			/* Already OOS, no need to do anymore checks */
-+			goto next;
-+
-+		if (check_channel(ctx, channel))
-+			qm_shutdown_fq(&portal, 1, fq_id);
-+ next:
-+		++fq_id;
-+	}
-+	return 0;
-+}
-+
-+static bool check_channel_device(void *_ctx, u32 channel)
-+{
-+	struct ctx *ctx = _ctx;
-+	struct portal_mapping *portal, *tmpportal;
-+	struct active_resource *res;
-+
-+	/* See if the FQ is destined for one of the portals we're cleaning up */
-+	list_for_each_entry_safe(portal, tmpportal, &ctx->portals, list) {
-+		if (portal->user.type == usdpaa_portal_qman) {
-+			if (portal->qportal->public_cfg.channel == channel) {
-+				/* This FQs destination is a portal
-+				   we're cleaning, send a retire */
-+				return true;
-+			}
-+		}
-+	}
-+
-+	/* Check the pool channels that will be released as well */
-+	list_for_each_entry(res, &ctx->resources[usdpaa_id_qpool], list) {
-+		if ((res->id >= channel) &&
-+		    ((res->id + res->num - 1) <= channel))
-+			return true;
-+	}
-+	return false;
-+}
-+
-+static bool check_portal_channel(void *ctx, u32 channel)
-+{
-+	u32 portal_channel = *(u32 *)ctx;
-+	if (portal_channel == channel) {
-+		/* This FQs destination is a portal
-+		   we're cleaning, send a retire */
-+		return true;
-+	}
-+	return false;
-+}
-+
-+
-+
-+
-+static int usdpaa_release(struct inode *inode, struct file *filp)
-+{
-+	struct ctx *ctx = filp->private_data;
-+	struct mem_mapping *map, *tmpmap;
-+	struct portal_mapping *portal, *tmpportal;
-+	const struct alloc_backend *backend = &alloc_backends[0];
-+	struct active_resource *res;
-+	struct qm_portal *qm_cleanup_portal = NULL;
-+	struct bm_portal *bm_cleanup_portal = NULL;
-+	struct qm_portal_config *qm_alloced_portal = NULL;
-+	struct bm_portal_config *bm_alloced_portal = NULL;
-+
-+	struct qm_portal *portal_array[qman_portal_max];
-+	int portal_count = 0;
-+
-+	/* Ensure the release operation cannot be migrated to another
-+	   CPU as CPU specific variables may be needed during cleanup */
-+#ifdef CONFIG_PREEMPT_RT_FULL
-+	migrate_disable();
-+#endif
-+	/* The following logic is used to recover resources that were not
-+	   correctly released by the process that is closing the FD.
-+	   Step 1: syncronize the HW with the qm_portal/bm_portal structures
-+	   in the kernel
-+	*/
-+
-+	list_for_each_entry_safe(portal, tmpportal, &ctx->portals, list) {
-+		/* Try to recover any portals that weren't shut down */
-+		if (portal->user.type == usdpaa_portal_qman) {
-+			portal_array[portal_count] = &portal->qman_portal_low;
-+			++portal_count;
-+			init_qm_portal(portal->qportal,
-+				       &portal->qman_portal_low);
-+			if (!qm_cleanup_portal) {
-+				qm_cleanup_portal = &portal->qman_portal_low;
-+			} else {
-+				/* Clean FQs on the dedicated channel */
-+				u32 chan = portal->qportal->public_cfg.channel;
-+				qm_check_and_destroy_fqs(
-+					&portal->qman_portal_low, &chan,
-+					check_portal_channel);
-+			}
-+		} else {
-+			/* BMAN */
-+			init_bm_portal(portal->bportal,
-+				       &portal->bman_portal_low);
-+			if (!bm_cleanup_portal)
-+				bm_cleanup_portal = &portal->bman_portal_low;
-+		}
-+	}
-+	/* If no portal was found, allocate one for cleanup */
-+	if (!qm_cleanup_portal) {
-+		qm_alloced_portal = qm_get_unused_portal();
-+		if (!qm_alloced_portal) {
-+			pr_crit("No QMan portal avalaible for cleanup\n");
-+#ifdef CONFIG_PREEMPT_RT_FULL
-+			migrate_enable();
-+#endif
-+			return -1;
-+		}
-+		qm_cleanup_portal = kmalloc(sizeof(struct qm_portal),
-+					    GFP_KERNEL);
-+		if (!qm_cleanup_portal) {
-+#ifdef CONFIG_PREEMPT_RT_FULL
-+			migrate_enable();
-+#endif
-+			return -ENOMEM;
-+		}
-+		init_qm_portal(qm_alloced_portal, qm_cleanup_portal);
-+		portal_array[portal_count] = qm_cleanup_portal;
-+		++portal_count;
-+	}
-+	if (!bm_cleanup_portal) {
-+		bm_alloced_portal = bm_get_unused_portal();
-+		if (!bm_alloced_portal) {
-+			pr_crit("No BMan portal avalaible for cleanup\n");
-+#ifdef CONFIG_PREEMPT_RT_FULL
-+			migrate_enable();
-+#endif
-+			return -1;
-+		}
-+		bm_cleanup_portal = kmalloc(sizeof(struct bm_portal),
-+					    GFP_KERNEL);
-+		if (!bm_cleanup_portal) {
-+#ifdef CONFIG_PREEMPT_RT_FULL
-+			migrate_enable();
-+#endif
-+			return -ENOMEM;
-+		}
-+		init_bm_portal(bm_alloced_portal, bm_cleanup_portal);
-+	}
-+
-+	/* OOS the FQs associated with this process */
-+	qm_check_and_destroy_fqs(qm_cleanup_portal, ctx, check_channel_device);
-+
-+	while (backend->id_type != usdpaa_id_max) {
-+		int leaks = 0;
-+		list_for_each_entry(res, &ctx->resources[backend->id_type],
-+				    list) {
-+			if (backend->id_type == usdpaa_id_fqid) {
-+				int i = 0;
-+				for (; i < res->num; i++) {
-+					/* Clean FQs with the cleanup portal */
-+					qm_shutdown_fq(portal_array,
-+						       portal_count,
-+						       res->id + i);
-+				}
-+			}
-+			leaks += res->num;
-+			backend->release(res->id, res->num);
-+		}
-+		if (leaks)
-+			pr_crit("USDPAA process leaking %d %s%s\n", leaks,
-+				backend->acronym, (leaks > 1) ? "s" : "");
-+		backend++;
-+	}
-+	/* Release any DMA regions */
-+	spin_lock(&mem_lock);
-+	list_for_each_entry_safe(map, tmpmap, &ctx->maps, list) {
-+		struct mem_fragment *current_frag = map->root_frag;
-+		int i;
-+		if (map->root_frag->has_locking &&
-+		    (map->root_frag->owner == map)) {
-+			map->root_frag->owner = NULL;
-+			wake_up(&map->root_frag->wq);
-+		}
-+		/* Check each fragment and merge if the ref count is 0 */
-+		for (i = 0; i < map->frag_count; i++) {
-+			--current_frag->refs;
-+			current_frag = list_entry(current_frag->list.prev,
-+						  struct mem_fragment, list);
-+		}
-+
-+		compress_frags();
-+		list_del(&map->list);
-+		kfree(map);
-+	}
-+	spin_unlock(&mem_lock);
-+
-+	/* Return portals */
-+	list_for_each_entry_safe(portal, tmpportal, &ctx->portals, list) {
-+		if (portal->user.type == usdpaa_portal_qman) {
-+			/* Give the portal back to the allocator */
-+			init_qm_portal(portal->qportal,
-+				       &portal->qman_portal_low);
-+			qm_put_unused_portal(portal->qportal);
-+		} else {
-+			init_bm_portal(portal->bportal,
-+				       &portal->bman_portal_low);
-+			bm_put_unused_portal(portal->bportal);
-+		}
-+		list_del(&portal->list);
-+		kfree(portal);
-+	}
-+	if (qm_alloced_portal) {
-+		qm_put_unused_portal(qm_alloced_portal);
-+		kfree(qm_cleanup_portal);
-+	}
-+	if (bm_alloced_portal) {
-+		bm_put_unused_portal(bm_alloced_portal);
-+		kfree(bm_cleanup_portal);
-+	}
-+
-+	kfree(ctx);
-+#ifdef CONFIG_PREEMPT_RT_FULL
-+	migrate_enable();
-+#endif
-+	return 0;
-+}
-+
-+static int check_mmap_dma(struct ctx *ctx, struct vm_area_struct *vma,
-+			  int *match, unsigned long *pfn)
-+{
-+	struct mem_mapping *map;
-+
-+	list_for_each_entry(map, &ctx->maps, list) {
-+		int i;
-+		struct mem_fragment *frag = map->root_frag;
-+
-+		for (i = 0; i < map->frag_count; i++) {
-+			if (frag->pfn_base == vma->vm_pgoff) {
-+				*match = 1;
-+				*pfn = frag->pfn_base;
-+				return 0;
-+			}
-+			frag = list_entry(frag->list.next, struct mem_fragment,
-+					  list);
-+		}
-+	}
-+	*match = 0;
-+	return 0;
-+}
-+
-+static int check_mmap_resource(struct resource *res, struct vm_area_struct *vma,
-+			       int *match, unsigned long *pfn)
-+{
-+	*pfn = res->start >> PAGE_SHIFT;
-+	if (*pfn == vma->vm_pgoff) {
-+		*match = 1;
-+		if ((vma->vm_end - vma->vm_start) != resource_size(res))
-+			return -EINVAL;
-+	} else
-+		*match = 0;
-+	return 0;
-+}
-+
-+static int check_mmap_portal(struct ctx *ctx, struct vm_area_struct *vma,
-+			      int *match, unsigned long *pfn)
-+{
-+	struct portal_mapping *portal;
-+	int ret;
-+
-+	list_for_each_entry(portal, &ctx->portals, list) {
-+		ret = check_mmap_resource(&portal->phys[DPA_PORTAL_CE], vma,
-+					  match, pfn);
-+		if (*match) {
-+			vma->vm_page_prot =
-+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+				pgprot_cached_ns(vma->vm_page_prot);
-+#else
-+				pgprot_cached_noncoherent(vma->vm_page_prot);
-+#endif
-+			return ret;
-+		}
-+		ret = check_mmap_resource(&portal->phys[DPA_PORTAL_CI], vma,
-+					  match, pfn);
-+		if (*match) {
-+			vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-+			return ret;
-+		}
-+	}
-+	*match = 0;
-+	return 0;
-+}
-+
-+static int usdpaa_mmap(struct file *filp, struct vm_area_struct *vma)
-+{
-+	struct ctx *ctx = filp->private_data;
-+	unsigned long pfn = 0;
-+	int match, ret;
-+
-+	spin_lock(&mem_lock);
-+	ret = check_mmap_dma(ctx, vma, &match, &pfn);
-+	if (!match)
-+		ret = check_mmap_portal(ctx, vma, &match, &pfn);
-+	spin_unlock(&mem_lock);
-+	if (!match)
-+		return -EINVAL;
-+	if (!ret)
-+		ret = remap_pfn_range(vma, vma->vm_start, pfn,
-+				      vma->vm_end - vma->vm_start,
-+				      vma->vm_page_prot);
-+	return ret;
-+}
-+
-+/* Return the nearest rounded-up address >= 'addr' that is 'sz'-aligned. 'sz'
-+ * must be a power of 2, but both 'addr' and 'sz' can be expressions. */
-+#define USDPAA_MEM_ROUNDUP(addr, sz) \
-+	({ \
-+		unsigned long foo_align = (sz) - 1; \
-+		((addr) + foo_align) & ~foo_align; \
-+	})
-+/* Searching for a size-aligned virtual address range starting from 'addr' */
-+static unsigned long usdpaa_get_unmapped_area(struct file *file,
-+					      unsigned long addr,
-+					      unsigned long len,
-+					      unsigned long pgoff,
-+					      unsigned long flags)
-+{
-+	struct vm_area_struct *vma;
-+
-+	if (len % PAGE_SIZE)
-+		return -EINVAL;
-+	if (!len)
-+		return -EINVAL;
-+
-+	/* Need to align the address to the largest pagesize of the mapping
-+	 * because the MMU requires the virtual address to have the same
-+	 * alignment as the physical address */
-+	addr = USDPAA_MEM_ROUNDUP(addr, largest_page_size(len));
-+	vma = find_vma(current->mm, addr);
-+	/* Keep searching until we reach the end of currently-used virtual
-+	 * address-space or we find a big enough gap. */
-+	while (vma) {
-+		if ((addr + len) < vma->vm_start)
-+			return addr;
-+
-+		addr = USDPAA_MEM_ROUNDUP(vma->vm_end,  largest_page_size(len));
-+		vma = vma->vm_next;
-+	}
-+	if ((TASK_SIZE - len) < addr)
-+		return -ENOMEM;
-+	return addr;
-+}
-+
-+static long ioctl_id_alloc(struct ctx *ctx, void __user *arg)
-+{
-+	struct usdpaa_ioctl_id_alloc i;
-+	const struct alloc_backend *backend;
-+	struct active_resource *res;
-+	int ret = copy_from_user(&i, arg, sizeof(i));
-+	if (ret)
-+		return ret;
-+	if ((i.id_type >= usdpaa_id_max) || !i.num)
-+		return -EINVAL;
-+	backend = &alloc_backends[i.id_type];
-+	/* Allocate the required resource type */
-+	ret = backend->alloc(&i.base, i.num, i.align, i.partial);
-+	if (ret < 0)
-+		return ret;
-+	i.num = ret;
-+	/* Copy the result to user-space */
-+	ret = copy_to_user(arg, &i, sizeof(i));
-+	if (ret) {
-+		backend->release(i.base, i.num);
-+		return ret;
-+	}
-+	/* Assign the allocated range to the FD accounting */
-+	res = kmalloc(sizeof(*res), GFP_KERNEL);
-+	if (!res) {
-+		backend->release(i.base, i.num);
-+		return -ENOMEM;
-+	}
-+	spin_lock(&ctx->lock);
-+	res->id = i.base;
-+	res->num = i.num;
-+	res->refcount = 1;
-+	list_add(&res->list, &ctx->resources[i.id_type]);
-+	spin_unlock(&ctx->lock);
-+	return 0;
-+}
-+
-+static long ioctl_id_release(struct ctx *ctx, void __user *arg)
-+{
-+	struct usdpaa_ioctl_id_release i;
-+	const struct alloc_backend *backend;
-+	struct active_resource *tmp, *pos;
-+
-+	int ret = copy_from_user(&i, arg, sizeof(i));
-+	if (ret)
-+		return ret;
-+	if ((i.id_type >= usdpaa_id_max) || !i.num)
-+		return -EINVAL;
-+	backend = &alloc_backends[i.id_type];
-+	/* Pull the range out of the FD accounting - the range is valid iff this
-+	 * succeeds. */
-+	spin_lock(&ctx->lock);
-+	list_for_each_entry_safe(pos, tmp, &ctx->resources[i.id_type], list) {
-+		if (pos->id == i.base && pos->num == i.num) {
-+			pos->refcount--;
-+			if (pos->refcount) {
-+				spin_unlock(&ctx->lock);
-+				return 0; /* Still being used */
-+			}
-+			list_del(&pos->list);
-+			kfree(pos);
-+			spin_unlock(&ctx->lock);
-+			goto found;
-+		}
-+	}
-+	/* Failed to find the resource */
-+	spin_unlock(&ctx->lock);
-+	pr_err("Couldn't find resource type %d base 0x%x num %d\n",
-+	       i.id_type, i.base, i.num);
-+	return -EINVAL;
-+found:
-+	/* Release the resource to the backend */
-+	backend->release(i.base, i.num);
-+	return 0;
-+}
-+
-+static long ioctl_id_reserve(struct ctx *ctx, void __user *arg)
-+{
-+	struct usdpaa_ioctl_id_reserve i;
-+	const struct alloc_backend *backend;
-+	struct active_resource *tmp, *pos;
-+
-+	int ret = copy_from_user(&i, arg, sizeof(i));
-+	if (ret)
-+		return ret;
-+	if ((i.id_type >= usdpaa_id_max) || !i.num)
-+		return -EINVAL;
-+	backend = &alloc_backends[i.id_type];
-+	if (!backend->reserve)
-+		return -EINVAL;
-+	/* Pull the range out of the FD accounting - the range is valid iff this
-+	 * succeeds. */
-+	spin_lock(&ctx->lock);
-+	list_for_each_entry_safe(pos, tmp, &ctx->resources[i.id_type], list) {
-+		if (pos->id == i.base && pos->num == i.num) {
-+			pos->refcount++;
-+			spin_unlock(&ctx->lock);
-+			return 0;
-+		}
-+	}
-+
-+	/* Failed to find the resource */
-+	spin_unlock(&ctx->lock);
-+
-+	/* Reserve the resource in the backend */
-+	ret = backend->reserve(i.base, i.num);
-+	if (ret)
-+		return ret;
-+	/* Assign the reserved range to the FD accounting */
-+	pos = kmalloc(sizeof(*pos), GFP_KERNEL);
-+	if (!pos) {
-+		backend->release(i.base, i.num);
-+		return -ENOMEM;
-+	}
-+	spin_lock(&ctx->lock);
-+	pos->id = i.base;
-+	pos->num = i.num;
-+	pos->refcount = 1;
-+	list_add(&pos->list, &ctx->resources[i.id_type]);
-+	spin_unlock(&ctx->lock);
-+	return 0;
-+}
-+
-+static long ioctl_dma_map(struct file *fp, struct ctx *ctx,
-+			  struct usdpaa_ioctl_dma_map *i)
-+{
-+	struct mem_fragment *frag, *start_frag, *next_frag;
-+	struct mem_mapping *map, *tmp;
-+	int ret = 0;
-+	u32 largest_page, so_far = 0;
-+	int frag_count = 0;
-+	unsigned long next_addr = PAGE_SIZE, populate;
-+
-+	/* error checking to ensure values copied from user space are valid */
-+	if (i->len % PAGE_SIZE)
-+		return -EINVAL;
-+
-+	map = kmalloc(sizeof(*map), GFP_KERNEL);
-+	if (!map)
-+		return -ENOMEM;
-+
-+	spin_lock(&mem_lock);
-+	if (i->flags & USDPAA_DMA_FLAG_SHARE) {
-+		list_for_each_entry(frag, &mem_list, list) {
-+			if (frag->refs && (frag->flags &
-+					   USDPAA_DMA_FLAG_SHARE) &&
-+					!strncmp(i->name, frag->name,
-+						 USDPAA_DMA_NAME_MAX)) {
-+				/* Matching entry */
-+				if ((i->flags & USDPAA_DMA_FLAG_CREATE) &&
-+				    !(i->flags & USDPAA_DMA_FLAG_LAZY)) {
-+					ret = -EBUSY;
-+					goto out;
-+				}
-+
-+				/* Check to ensure size matches record */
-+				if (i->len != frag->map_len && i->len) {
-+					pr_err("ioctl_dma_map() Size requested does not match %s and is none zero\n",
-+					frag->name);
-+					return -EINVAL;
-+				}
-+
-+				/* Check if this has already been mapped
-+				   to this process */
-+				list_for_each_entry(tmp, &ctx->maps, list)
-+					if (tmp->root_frag == frag) {
-+						/* Already mapped, just need to
-+						   inc ref count */
-+						tmp->refs++;
-+						kfree(map);
-+						i->did_create = 0;
-+						i->len = tmp->total_size;
-+						i->phys_addr = frag->base;
-+						i->ptr = tmp->virt_addr;
-+						spin_unlock(&mem_lock);
-+						return 0;
-+					}
-+				/* Matching entry - just need to map */
-+				i->has_locking = frag->has_locking;
-+				i->did_create = 0;
-+				i->len = frag->map_len;
-+				start_frag = frag;
-+				goto do_map;
-+			}
-+		}
-+		/* No matching entry */
-+		if (!(i->flags & USDPAA_DMA_FLAG_CREATE)) {
-+			pr_err("ioctl_dma_map() No matching entry\n");
-+			ret = -ENOMEM;
-+			goto out;
-+		}
-+	}
-+	/* New fragment required, size must be provided. */
-+	if (!i->len) {
-+		ret = -EINVAL;
-+		goto out;
-+	}
-+
-+	/* Find one of more contiguous fragments that satisfy the total length
-+	   trying to minimize the number of fragments
-+	   compute the largest page size that the allocation could use */
-+	largest_page = largest_page_size(i->len);
-+	start_frag = NULL;
-+	while (largest_page &&
-+	       largest_page <= largest_page_size(phys_size) &&
-+	       start_frag == NULL) {
-+		/* Search the list for a frag of that size */
-+		list_for_each_entry(frag, &mem_list, list) {
-+			if (!frag->refs && (frag->len == largest_page)) {
-+				/* See if the next x fragments are free
-+				   and can accomidate the size */
-+				u32 found_size = largest_page;
-+				next_frag = list_entry(frag->list.prev,
-+						       struct mem_fragment,
-+						       list);
-+				/* If the fragement is too small check
-+				   if the neighbours cab support it */
-+				while (found_size < i->len) {
-+					if (&mem_list == &next_frag->list)
-+						break; /* End of list */
-+					if (next_frag->refs != 0 ||
-+					    next_frag->len == 0)
-+						break; /* not enough space */
-+					found_size += next_frag->len;
-+					next_frag = list_entry(
-+						next_frag->list.prev,
-+						struct mem_fragment,
-+						list);
-+				}
-+				if (found_size >= i->len) {
-+					/* Success! there is enough contigous
-+					   free space */
-+					start_frag = frag;
-+					break;
-+				}
-+			}
-+		} /* next frag loop */
-+		/* Couldn't statisfy the request with this
-+		   largest page size, try a smaller one */
-+		largest_page <<= 2;
-+	}
-+	if (start_frag == NULL) {
-+		/* Couldn't find proper amount of space */
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+	i->did_create = 1;
-+do_map:
-+	/* Verify there is sufficient space to do the mapping */
-+	down_write(&current->mm->mmap_sem);
-+	next_addr = usdpaa_get_unmapped_area(fp, next_addr, i->len, 0, 0);
-+	up_write(&current->mm->mmap_sem);
-+
-+	if (next_addr & ~PAGE_MASK) {
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+
-+	/* We may need to divide the final fragment to accomidate the mapping */
-+	next_frag = start_frag;
-+	while (so_far != i->len) {
-+		BUG_ON(next_frag->len == 0);
-+		while ((next_frag->len + so_far) > i->len) {
-+			/* Split frag until they match */
-+			split_frag(next_frag);
-+		}
-+		so_far += next_frag->len;
-+		next_frag->refs++;
-+		++frag_count;
-+		next_frag = list_entry(next_frag->list.prev,
-+				       struct mem_fragment, list);
-+	}
-+	if (i->did_create) {
-+		size_t name_len = 0;
-+		start_frag->flags = i->flags;
-+		strncpy(start_frag->name, i->name, USDPAA_DMA_NAME_MAX);
-+		name_len = strnlen(start_frag->name, USDPAA_DMA_NAME_MAX);
-+		if (name_len >= USDPAA_DMA_NAME_MAX) {
-+			ret = -EFAULT;
-+			goto out;
-+		}
-+		start_frag->map_len = i->len;
-+		start_frag->has_locking = i->has_locking;
-+		init_waitqueue_head(&start_frag->wq);
-+		start_frag->owner = NULL;
-+	}
-+
-+	/* Setup the map entry */
-+	map->root_frag = start_frag;
-+	map->total_size = i->len;
-+	map->frag_count = frag_count;
-+	map->refs = 1;
-+	list_add(&map->list, &ctx->maps);
-+	i->phys_addr = start_frag->base;
-+out:
-+	spin_unlock(&mem_lock);
-+
-+	if (!ret) {
-+		unsigned long longret;
-+		down_write(&current->mm->mmap_sem);
-+		longret = do_mmap_pgoff(fp, next_addr, map->total_size,
-+					PROT_READ |
-+					(i->flags &
-+					 USDPAA_DMA_FLAG_RDONLY ? 0
-+					 : PROT_WRITE),
-+					MAP_SHARED,
-+					start_frag->pfn_base,
-+					&populate,
-+					NULL);
-+		up_write(&current->mm->mmap_sem);
-+		if (longret & ~PAGE_MASK) {
-+			ret = (int)longret;
-+		} else {
-+			i->ptr = (void *)longret;
-+			map->virt_addr = i->ptr;
-+		}
-+	} else
-+		kfree(map);
-+	return ret;
-+}
-+
-+static long ioctl_dma_unmap(struct ctx *ctx, void __user *arg)
-+{
-+	struct mem_mapping *map;
-+	struct vm_area_struct *vma;
-+	int ret, i;
-+	struct mem_fragment *current_frag;
-+	size_t sz;
-+	unsigned long base;
-+	unsigned long vaddr;
-+
-+	down_write(&current->mm->mmap_sem);
-+	vma = find_vma(current->mm, (unsigned long)arg);
-+	if (!vma || (vma->vm_start > (unsigned long)arg)) {
-+		up_write(&current->mm->mmap_sem);
-+		return -EFAULT;
-+	}
-+	spin_lock(&mem_lock);
-+	list_for_each_entry(map, &ctx->maps, list) {
-+		if (map->root_frag->pfn_base == vma->vm_pgoff) {
-+			/* Drop the map lock if we hold it */
-+			if (map->root_frag->has_locking &&
-+					(map->root_frag->owner == map)) {
-+				map->root_frag->owner = NULL;
-+				wake_up(&map->root_frag->wq);
-+			}
-+			goto map_match;
-+		}
-+	}
-+	/* Failed to find a matching mapping for this process */
-+	ret = -EFAULT;
-+	spin_unlock(&mem_lock);
-+	goto out;
-+map_match:
-+	map->refs--;
-+	if (map->refs != 0) {
-+		/* Another call the dma_map is referencing this */
-+		ret = 0;
-+		spin_unlock(&mem_lock);
-+		goto out;
-+	}
-+
-+	current_frag = map->root_frag;
-+	vaddr = (unsigned long) map->virt_addr;
-+	for (i = 0; i < map->frag_count; i++) {
-+		DPA_ASSERT(current_frag->refs > 0);
-+		--current_frag->refs;
-+#if !(defined(CONFIG_ARM) || defined(CONFIG_ARM64))
-+		/*
-+		 * Make sure we invalidate the TLB entry for
-+		 * this fragment, otherwise a remap of a different
-+		 * page to this vaddr would give acces to an
-+		 * incorrect piece of memory
-+		 */
-+		cleartlbcam(vaddr, mfspr(SPRN_PID));
-+#endif
-+		vaddr += current_frag->len;
-+		current_frag = list_entry(current_frag->list.prev,
-+					  struct mem_fragment, list);
-+	}
-+	map->root_frag->name[0] = 0;
-+	list_del(&map->list);
-+	compress_frags();
-+	spin_unlock(&mem_lock);
-+
-+	base = vma->vm_start;
-+	sz = vma->vm_end - vma->vm_start;
-+	do_munmap(current->mm, base, sz, NULL);
-+	ret = 0;
-+ out:
-+	up_write(&current->mm->mmap_sem);
-+	return ret;
-+}
-+
-+static long ioctl_dma_stats(struct ctx *ctx, void __user *arg)
-+{
-+	struct mem_fragment *frag;
-+	struct usdpaa_ioctl_dma_used result;
-+
-+	result.free_bytes = 0;
-+	result.total_bytes = phys_size;
-+
-+	list_for_each_entry(frag, &mem_list, list) {
-+		if (frag->refs == 0)
-+			result.free_bytes += frag->len;
-+	}
-+
-+	return copy_to_user(arg, &result, sizeof(result)); }
-+
-+static int test_lock(struct mem_mapping *map)
-+{
-+	int ret = 0;
-+	spin_lock(&mem_lock);
-+	if (!map->root_frag->owner) {
-+		map->root_frag->owner = map;
-+		ret = 1;
-+	}
-+	spin_unlock(&mem_lock);
-+	return ret;
-+}
-+
-+static long ioctl_dma_lock(struct ctx *ctx, void __user *arg)
-+{
-+	struct mem_mapping *map;
-+	struct vm_area_struct *vma;
-+
-+	down_read(&current->mm->mmap_sem);
-+	vma = find_vma(current->mm, (unsigned long)arg);
-+	if (!vma || (vma->vm_start > (unsigned long)arg)) {
-+		up_read(&current->mm->mmap_sem);
-+		return -EFAULT;
-+	}
-+	spin_lock(&mem_lock);
-+	list_for_each_entry(map, &ctx->maps, list) {
-+		if (map->root_frag->pfn_base == vma->vm_pgoff)
-+			goto map_match;
-+	}
-+	map = NULL;
-+map_match:
-+	spin_unlock(&mem_lock);
-+	up_read(&current->mm->mmap_sem);
-+
-+	if (!map)
-+		return -EFAULT;
-+	if (!map->root_frag->has_locking)
-+		return -ENODEV;
-+	return wait_event_interruptible(map->root_frag->wq, test_lock(map));
-+}
-+
-+static long ioctl_dma_unlock(struct ctx *ctx, void __user *arg)
-+{
-+	struct mem_mapping *map;
-+	struct vm_area_struct *vma;
-+	int ret;
-+
-+	down_read(&current->mm->mmap_sem);
-+	vma = find_vma(current->mm, (unsigned long)arg);
-+	if (!vma || (vma->vm_start > (unsigned long)arg))
-+		ret = -EFAULT;
-+	else {
-+		spin_lock(&mem_lock);
-+		list_for_each_entry(map, &ctx->maps, list) {
-+			if (map->root_frag->pfn_base == vma->vm_pgoff) {
-+				if (!map->root_frag->has_locking)
-+					ret = -ENODEV;
-+				else if (map->root_frag->owner == map) {
-+					map->root_frag->owner = NULL;
-+					wake_up(&map->root_frag->wq);
-+					ret = 0;
-+				} else
-+					ret = -EBUSY;
-+				goto map_match;
-+			}
-+		}
-+		ret = -EINVAL;
-+map_match:
-+		spin_unlock(&mem_lock);
-+	}
-+	up_read(&current->mm->mmap_sem);
-+	return ret;
-+}
-+
-+static int portal_mmap(struct file *fp, struct resource *res, void **ptr)
-+{
-+	unsigned long longret = 0, populate;
-+	resource_size_t len;
-+
-+	down_write(&current->mm->mmap_sem);
-+	len = resource_size(res);
-+	if (len != (unsigned long)len)
-+		return -EINVAL;
-+	longret = do_mmap_pgoff(fp, PAGE_SIZE, (unsigned long)len,
-+				PROT_READ | PROT_WRITE, MAP_SHARED,
-+				res->start >> PAGE_SHIFT, &populate, NULL);
-+	up_write(&current->mm->mmap_sem);
-+
-+	if (longret & ~PAGE_MASK)
-+		return (int)longret;
-+
-+	*ptr = (void *) longret;
-+	return 0;
-+}
-+
-+static void portal_munmap(struct resource *res, void  *ptr)
-+{
-+	down_write(&current->mm->mmap_sem);
-+	do_munmap(current->mm, (unsigned long)ptr, resource_size(res), NULL);
-+	up_write(&current->mm->mmap_sem);
-+}
-+
-+static long ioctl_portal_map(struct file *fp, struct ctx *ctx,
-+			     struct usdpaa_ioctl_portal_map  *arg)
-+{
-+	struct portal_mapping *mapping = kmalloc(sizeof(*mapping), GFP_KERNEL);
-+	int ret;
-+
-+	if (!mapping)
-+		return -ENOMEM;
-+
-+	mapping->user = *arg;
-+	mapping->iommu_domain = NULL;
-+
-+	if (mapping->user.type == usdpaa_portal_qman) {
-+		mapping->qportal =
-+			qm_get_unused_portal_idx(mapping->user.index);
-+		if (!mapping->qportal) {
-+			ret = -ENODEV;
-+			goto err_get_portal;
-+		}
-+		mapping->phys = &mapping->qportal->addr_phys[0];
-+		mapping->user.channel = mapping->qportal->public_cfg.channel;
-+		mapping->user.pools = mapping->qportal->public_cfg.pools;
-+		mapping->user.index = mapping->qportal->public_cfg.index;
-+	} else if (mapping->user.type == usdpaa_portal_bman) {
-+		mapping->bportal =
-+			bm_get_unused_portal_idx(mapping->user.index);
-+		if (!mapping->bportal) {
-+			ret = -ENODEV;
-+			goto err_get_portal;
-+		}
-+		mapping->phys = &mapping->bportal->addr_phys[0];
-+		mapping->user.index = mapping->bportal->public_cfg.index;
-+	} else {
-+		ret = -EINVAL;
-+		goto err_copy_from_user;
-+	}
-+	/* Need to put pcfg in ctx's list before the mmaps because the mmap
-+	 * handlers look it up. */
-+	spin_lock(&mem_lock);
-+	list_add(&mapping->list, &ctx->portals);
-+	spin_unlock(&mem_lock);
-+	ret = portal_mmap(fp, &mapping->phys[DPA_PORTAL_CE],
-+			  &mapping->user.addr.cena);
-+	if (ret)
-+		goto err_mmap_cena;
-+	ret = portal_mmap(fp, &mapping->phys[DPA_PORTAL_CI],
-+			  &mapping->user.addr.cinh);
-+	if (ret)
-+		goto err_mmap_cinh;
-+	*arg = mapping->user;
-+	return ret;
-+
-+err_mmap_cinh:
-+	portal_munmap(&mapping->phys[DPA_PORTAL_CE], mapping->user.addr.cena);
-+err_mmap_cena:
-+	if ((mapping->user.type == usdpaa_portal_qman) && mapping->qportal)
-+		qm_put_unused_portal(mapping->qportal);
-+	else if ((mapping->user.type == usdpaa_portal_bman) && mapping->bportal)
-+		bm_put_unused_portal(mapping->bportal);
-+	spin_lock(&mem_lock);
-+	list_del(&mapping->list);
-+	spin_unlock(&mem_lock);
-+err_get_portal:
-+err_copy_from_user:
-+	kfree(mapping);
-+	return ret;
-+}
-+
-+static long ioctl_portal_unmap(struct ctx *ctx, struct usdpaa_portal_map *i)
-+{
-+	struct portal_mapping *mapping;
-+	struct vm_area_struct *vma;
-+	unsigned long pfn;
-+	u32 channel;
-+
-+	/* Get the PFN corresponding to one of the virt addresses */
-+	down_read(&current->mm->mmap_sem);
-+	vma = find_vma(current->mm, (unsigned long)i->cinh);
-+	if (!vma || (vma->vm_start > (unsigned long)i->cinh)) {
-+		up_read(&current->mm->mmap_sem);
-+		return -EFAULT;
-+	}
-+	pfn = vma->vm_pgoff;
-+	up_read(&current->mm->mmap_sem);
-+
-+	/* Find the corresponding portal */
-+	spin_lock(&mem_lock);
-+	list_for_each_entry(mapping, &ctx->portals, list) {
-+		if (pfn == (mapping->phys[DPA_PORTAL_CI].start >> PAGE_SHIFT))
-+			goto found;
-+	}
-+	mapping = NULL;
-+found:
-+	if (mapping)
-+		list_del(&mapping->list);
-+	spin_unlock(&mem_lock);
-+	if (!mapping)
-+		return -ENODEV;
-+	portal_munmap(&mapping->phys[DPA_PORTAL_CI], mapping->user.addr.cinh);
-+	portal_munmap(&mapping->phys[DPA_PORTAL_CE], mapping->user.addr.cena);
-+	if (mapping->user.type == usdpaa_portal_qman) {
-+		init_qm_portal(mapping->qportal,
-+				       &mapping->qman_portal_low);
-+
-+		/* Tear down any FQs this portal is referencing */
-+		channel = mapping->qportal->public_cfg.channel;
-+		qm_check_and_destroy_fqs(&mapping->qman_portal_low,
-+					 &channel,
-+					 check_portal_channel);
-+		qm_put_unused_portal(mapping->qportal);
-+	} else if (mapping->user.type == usdpaa_portal_bman) {
-+		init_bm_portal(mapping->bportal,
-+			       &mapping->bman_portal_low);
-+		bm_put_unused_portal(mapping->bportal);
-+	}
-+	kfree(mapping);
-+	return 0;
-+}
-+
-+static void portal_config_pamu(struct qm_portal_config *pcfg, uint8_t sdest,
-+			       uint32_t cpu, uint32_t cache, uint32_t window)
-+{
-+#ifdef CONFIG_FSL_PAMU
-+	int ret;
-+	int window_count = 1;
-+	struct iommu_domain_geometry geom_attr;
-+	struct pamu_stash_attribute stash_attr;
-+
-+	pcfg->iommu_domain = iommu_domain_alloc(&platform_bus_type);
-+	if (!pcfg->iommu_domain) {
-+		pr_err(KBUILD_MODNAME ":%s(): iommu_domain_alloc() failed",
-+			   __func__);
-+		goto _no_iommu;
-+	}
-+	geom_attr.aperture_start = 0;
-+	geom_attr.aperture_end =
-+		((dma_addr_t)1 << min(8 * sizeof(dma_addr_t), (size_t)36)) - 1;
-+	geom_attr.force_aperture = true;
-+	ret = iommu_domain_set_attr(pcfg->iommu_domain, DOMAIN_ATTR_GEOMETRY,
-+				    &geom_attr);
-+	if (ret < 0) {
-+		pr_err(KBUILD_MODNAME ":%s(): iommu_domain_set_attr() = %d",
-+			   __func__, ret);
-+		goto _iommu_domain_free;
-+	}
-+	ret = iommu_domain_set_attr(pcfg->iommu_domain, DOMAIN_ATTR_WINDOWS,
-+				    &window_count);
-+	if (ret < 0) {
-+		pr_err(KBUILD_MODNAME ":%s(): iommu_domain_set_attr() = %d",
-+			   __func__, ret);
-+		goto _iommu_domain_free;
-+	}
-+	stash_attr.cpu = cpu;
-+	stash_attr.cache = cache;
-+	/* set stash information for the window */
-+	stash_attr.window = 0;
-+
-+	ret = iommu_domain_set_attr(pcfg->iommu_domain,
-+				    DOMAIN_ATTR_FSL_PAMU_STASH,
-+				    &stash_attr);
-+	if (ret < 0) {
-+		pr_err(KBUILD_MODNAME ":%s(): iommu_domain_set_attr() = %d",
-+			   __func__, ret);
-+		goto _iommu_domain_free;
-+	}
-+	ret = iommu_domain_window_enable(pcfg->iommu_domain, 0, 0, 1ULL << 36,
-+					 IOMMU_READ | IOMMU_WRITE);
-+	if (ret < 0) {
-+		pr_err(KBUILD_MODNAME ":%s(): iommu_domain_window_enable() = %d",
-+			   __func__, ret);
-+		goto _iommu_domain_free;
-+	}
-+	ret = iommu_attach_device(pcfg->iommu_domain, &pcfg->dev);
-+	if (ret < 0) {
-+		pr_err(KBUILD_MODNAME ":%s(): iommu_device_attach() = %d",
-+			   __func__, ret);
-+		goto _iommu_domain_free;
-+	}
-+	ret = iommu_domain_set_attr(pcfg->iommu_domain,
-+				    DOMAIN_ATTR_FSL_PAMU_ENABLE,
-+				    &window_count);
-+	if (ret < 0) {
-+		pr_err(KBUILD_MODNAME ":%s(): iommu_domain_set_attr() = %d",
-+			   __func__, ret);
-+		goto _iommu_detach_device;
-+	}
-+_no_iommu:
-+#endif
-+
-+#ifdef CONFIG_FSL_QMAN_CONFIG
-+	if (qman_set_sdest(pcfg->public_cfg.channel, sdest))
-+#endif
-+		pr_warn("Failed to set QMan portal's stash request queue\n");
-+
-+	return;
-+
-+#ifdef CONFIG_FSL_PAMU
-+_iommu_detach_device:
-+	iommu_detach_device(pcfg->iommu_domain, NULL);
-+_iommu_domain_free:
-+	iommu_domain_free(pcfg->iommu_domain);
-+#endif
-+}
-+
-+static long ioctl_allocate_raw_portal(struct file *fp, struct ctx *ctx,
-+				      struct usdpaa_ioctl_raw_portal *arg)
-+{
-+	struct portal_mapping *mapping = kmalloc(sizeof(*mapping), GFP_KERNEL);
-+	int ret;
-+
-+	if (!mapping)
-+		return -ENOMEM;
-+
-+	mapping->user.type = arg->type;
-+	mapping->iommu_domain = NULL;
-+	if (arg->type == usdpaa_portal_qman) {
-+		mapping->qportal = qm_get_unused_portal_idx(arg->index);
-+		if (!mapping->qportal) {
-+			ret = -ENODEV;
-+			goto err;
-+		}
-+		mapping->phys = &mapping->qportal->addr_phys[0];
-+		arg->index = mapping->qportal->public_cfg.index;
-+		arg->cinh = mapping->qportal->addr_phys[DPA_PORTAL_CI].start;
-+		arg->cena = mapping->qportal->addr_phys[DPA_PORTAL_CE].start;
-+		if (arg->enable_stash) {
-+			/* Setup the PAMU with the supplied parameters */
-+			portal_config_pamu(mapping->qportal, arg->sdest,
-+					   arg->cpu, arg->cache, arg->window);
-+		}
-+	} else if (mapping->user.type == usdpaa_portal_bman) {
-+		mapping->bportal =
-+			bm_get_unused_portal_idx(arg->index);
-+		if (!mapping->bportal) {
-+			ret = -ENODEV;
-+			goto err;
-+		}
-+		mapping->phys = &mapping->bportal->addr_phys[0];
-+		arg->index = mapping->bportal->public_cfg.index;
-+		arg->cinh = mapping->bportal->addr_phys[DPA_PORTAL_CI].start;
-+		arg->cena = mapping->bportal->addr_phys[DPA_PORTAL_CE].start;
-+	} else {
-+		ret = -EINVAL;
-+		goto err;
-+	}
-+	/* Need to put pcfg in ctx's list before the mmaps because the mmap
-+	 * handlers look it up. */
-+	spin_lock(&mem_lock);
-+	list_add(&mapping->list, &ctx->portals);
-+	spin_unlock(&mem_lock);
-+	return 0;
-+err:
-+	kfree(mapping);
-+	return ret;
-+}
-+
-+static long ioctl_free_raw_portal(struct file *fp, struct ctx *ctx,
-+				      struct usdpaa_ioctl_raw_portal *arg)
-+{
-+	struct portal_mapping *mapping;
-+	u32 channel;
-+
-+	/* Find the corresponding portal */
-+	spin_lock(&mem_lock);
-+	list_for_each_entry(mapping, &ctx->portals, list) {
-+		if (mapping->phys[DPA_PORTAL_CI].start == arg->cinh)
-+			goto found;
-+	}
-+	mapping = NULL;
-+found:
-+	if (mapping)
-+		list_del(&mapping->list);
-+	spin_unlock(&mem_lock);
-+	if (!mapping)
-+		return -ENODEV;
-+	if (mapping->user.type == usdpaa_portal_qman) {
-+		init_qm_portal(mapping->qportal,
-+				       &mapping->qman_portal_low);
-+
-+		/* Tear down any FQs this portal is referencing */
-+		channel = mapping->qportal->public_cfg.channel;
-+		qm_check_and_destroy_fqs(&mapping->qman_portal_low,
-+					 &channel,
-+					 check_portal_channel);
-+		qm_put_unused_portal(mapping->qportal);
-+	} else if (mapping->user.type == usdpaa_portal_bman) {
-+		init_bm_portal(mapping->bportal,
-+			       &mapping->bman_portal_low);
-+		bm_put_unused_portal(mapping->bportal);
-+	}
-+	kfree(mapping);
-+	return 0;
-+}
-+
-+static long usdpaa_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
-+{
-+	struct ctx *ctx = fp->private_data;
-+	void __user *a = (void __user *)arg;
-+	switch (cmd) {
-+	case USDPAA_IOCTL_ID_ALLOC:
-+		return ioctl_id_alloc(ctx, a);
-+	case USDPAA_IOCTL_ID_RELEASE:
-+		return ioctl_id_release(ctx, a);
-+	case USDPAA_IOCTL_ID_RESERVE:
-+		return ioctl_id_reserve(ctx, a);
-+	case USDPAA_IOCTL_DMA_MAP:
-+	{
-+		struct usdpaa_ioctl_dma_map input;
-+		int ret;
-+		if (copy_from_user(&input, a, sizeof(input)))
-+			return -EFAULT;
-+		ret = ioctl_dma_map(fp, ctx, &input);
-+		if (copy_to_user(a, &input, sizeof(input)))
-+			return -EFAULT;
-+		return ret;
-+	}
-+	case USDPAA_IOCTL_DMA_UNMAP:
-+		return ioctl_dma_unmap(ctx, a);
-+	case USDPAA_IOCTL_DMA_LOCK:
-+		return ioctl_dma_lock(ctx, a);
-+	case USDPAA_IOCTL_DMA_UNLOCK:
-+		return ioctl_dma_unlock(ctx, a);
-+	case USDPAA_IOCTL_PORTAL_MAP:
-+	{
-+		struct usdpaa_ioctl_portal_map input;
-+		int ret;
-+		if (copy_from_user(&input, a, sizeof(input)))
-+			return -EFAULT;
-+		ret =  ioctl_portal_map(fp, ctx, &input);
-+		if (copy_to_user(a, &input, sizeof(input)))
-+			return -EFAULT;
-+		return ret;
-+	}
-+	case USDPAA_IOCTL_PORTAL_UNMAP:
-+	{
-+		struct usdpaa_portal_map input;
-+		if (copy_from_user(&input, a, sizeof(input)))
-+			return -EFAULT;
-+		return ioctl_portal_unmap(ctx, &input);
-+	}
-+	case USDPAA_IOCTL_DMA_USED:
-+		return ioctl_dma_stats(ctx, a);
-+	case USDPAA_IOCTL_ALLOC_RAW_PORTAL:
-+	{
-+		struct usdpaa_ioctl_raw_portal input;
-+		int ret;
-+		if (copy_from_user(&input, a, sizeof(input)))
-+			return -EFAULT;
-+		ret = ioctl_allocate_raw_portal(fp, ctx, &input);
-+		if (copy_to_user(a, &input, sizeof(input)))
-+			return -EFAULT;
-+		return ret;
-+	}
-+	case USDPAA_IOCTL_FREE_RAW_PORTAL:
-+	{
-+		struct usdpaa_ioctl_raw_portal input;
-+		if (copy_from_user(&input, a, sizeof(input)))
-+			return -EFAULT;
-+		return ioctl_free_raw_portal(fp, ctx, &input);
-+	}
-+	}
-+	return -EINVAL;
-+}
-+
-+static long usdpaa_ioctl_compat(struct file *fp, unsigned int cmd,
-+				unsigned long arg)
-+{
-+#ifdef CONFIG_COMPAT
-+	struct ctx *ctx = fp->private_data;
-+	void __user *a = (void __user *)arg;
-+#endif
-+	switch (cmd) {
-+#ifdef CONFIG_COMPAT
-+	case USDPAA_IOCTL_DMA_MAP_COMPAT:
-+	{
-+		int ret;
-+		struct usdpaa_ioctl_dma_map_compat input;
-+		struct usdpaa_ioctl_dma_map converted;
-+
-+		if (copy_from_user(&input, a, sizeof(input)))
-+			return -EFAULT;
-+
-+		converted.ptr = compat_ptr(input.ptr);
-+		converted.phys_addr = input.phys_addr;
-+		converted.len = input.len;
-+		converted.flags = input.flags;
-+		strncpy(converted.name, input.name, USDPAA_DMA_NAME_MAX);
-+		converted.has_locking = input.has_locking;
-+		converted.did_create = input.did_create;
-+
-+		ret = ioctl_dma_map(fp, ctx, &converted);
-+		input.ptr = ptr_to_compat(converted.ptr);
-+		input.phys_addr = converted.phys_addr;
-+		input.len = converted.len;
-+		input.flags = converted.flags;
-+		strncpy(input.name, converted.name, USDPAA_DMA_NAME_MAX);
-+		input.has_locking = converted.has_locking;
-+		input.did_create = converted.did_create;
-+		if (copy_to_user(a, &input, sizeof(input)))
-+			return -EFAULT;
-+		return ret;
-+	}
-+	case USDPAA_IOCTL_PORTAL_MAP_COMPAT:
-+	{
-+		int ret;
-+		struct compat_usdpaa_ioctl_portal_map input;
-+		struct usdpaa_ioctl_portal_map converted;
-+		if (copy_from_user(&input, a, sizeof(input)))
-+			return -EFAULT;
-+		converted.type = input.type;
-+		converted.index = input.index;
-+		ret = ioctl_portal_map(fp, ctx, &converted);
-+		input.addr.cinh = ptr_to_compat(converted.addr.cinh);
-+		input.addr.cena = ptr_to_compat(converted.addr.cena);
-+		input.channel = converted.channel;
-+		input.pools = converted.pools;
-+		input.index = converted.index;
-+		if (copy_to_user(a, &input, sizeof(input)))
-+			return -EFAULT;
-+		return ret;
-+	}
-+	case USDPAA_IOCTL_PORTAL_UNMAP_COMPAT:
-+	{
-+		struct usdpaa_portal_map_compat input;
-+		struct usdpaa_portal_map converted;
-+
-+		if (copy_from_user(&input, a, sizeof(input)))
-+			return -EFAULT;
-+		converted.cinh = compat_ptr(input.cinh);
-+		converted.cena = compat_ptr(input.cena);
-+		return ioctl_portal_unmap(ctx, &converted);
-+	}
-+	case USDPAA_IOCTL_ALLOC_RAW_PORTAL_COMPAT:
-+	{
-+		int ret;
-+		struct usdpaa_ioctl_raw_portal converted;
-+		struct compat_ioctl_raw_portal input;
-+		if (copy_from_user(&input, a, sizeof(input)))
-+			return -EFAULT;
-+		converted.type = input.type;
-+		converted.index = input.index;
-+		converted.enable_stash = input.enable_stash;
-+		converted.cpu = input.cpu;
-+		converted.cache = input.cache;
-+		converted.window = input.window;
-+		converted.sdest = input.sdest;
-+		ret = ioctl_allocate_raw_portal(fp, ctx, &converted);
-+
-+		input.cinh = converted.cinh;
-+		input.cena = converted.cena;
-+		input.index = converted.index;
-+
-+		if (copy_to_user(a, &input, sizeof(input)))
-+			return -EFAULT;
-+		return ret;
-+	}
-+	case USDPAA_IOCTL_FREE_RAW_PORTAL_COMPAT:
-+	{
-+		struct usdpaa_ioctl_raw_portal converted;
-+		struct compat_ioctl_raw_portal input;
-+		if (copy_from_user(&input, a, sizeof(input)))
-+			return -EFAULT;
-+		converted.type = input.type;
-+		converted.index = input.index;
-+		converted.cinh = input.cinh;
-+		converted.cena = input.cena;
-+		return ioctl_free_raw_portal(fp, ctx, &converted);
-+	}
-+#endif
-+	default:
-+		return usdpaa_ioctl(fp, cmd, arg);
-+	}
-+	return -EINVAL;
-+}
-+
-+int usdpaa_get_portal_config(struct file *filp, void *cinh,
-+			     enum usdpaa_portal_type ptype, unsigned int *irq,
-+			     void **iir_reg)
-+{
-+	/* Walk the list of portals for filp and return the config
-+	   for the portal that matches the hint */
-+	struct ctx *context;
-+	struct portal_mapping *portal;
-+
-+	/* First sanitize the filp */
-+	if (filp->f_op->open != usdpaa_open)
-+		return -ENODEV;
-+	context = filp->private_data;
-+	spin_lock(&context->lock);
-+	list_for_each_entry(portal, &context->portals, list) {
-+		if (portal->user.type == ptype &&
-+		    portal->user.addr.cinh == cinh) {
-+			if (ptype == usdpaa_portal_qman) {
-+				*irq = portal->qportal->public_cfg.irq;
-+				*iir_reg = portal->qportal->addr_virt[1] +
-+					QM_REG_IIR;
-+			} else {
-+				*irq = portal->bportal->public_cfg.irq;
-+				*iir_reg = portal->bportal->addr_virt[1] +
-+					BM_REG_IIR;
-+			}
-+			spin_unlock(&context->lock);
-+			return 0;
-+		}
-+	}
-+	spin_unlock(&context->lock);
-+	return -EINVAL;
-+}
-+
-+static const struct file_operations usdpaa_fops = {
-+	.open		   = usdpaa_open,
-+	.release	   = usdpaa_release,
-+	.mmap		   = usdpaa_mmap,
-+	.get_unmapped_area = usdpaa_get_unmapped_area,
-+	.unlocked_ioctl	   = usdpaa_ioctl,
-+	.compat_ioctl	   = usdpaa_ioctl_compat
-+};
-+
-+static struct miscdevice usdpaa_miscdev = {
-+	.name = "fsl-usdpaa",
-+	.fops = &usdpaa_fops,
-+	.minor = MISC_DYNAMIC_MINOR,
-+};
-+
-+/* Early-boot memory allocation. The boot-arg "usdpaa_mem=<x>" is used to
-+ * indicate how much memory (if any) to allocate during early boot. If the
-+ * format "usdpaa_mem=<x>,<y>" is used, then <y> will be interpreted as the
-+ * number of TLB1 entries to reserve (default is 1). If there are more mappings
-+ * than there are TLB1 entries, fault-handling will occur. */
-+
-+static __init int usdpaa_mem(char *arg)
-+{
-+	pr_warn("uspdaa_mem argument is depracated\n");
-+	arg_phys_size = memparse(arg, &arg);
-+	num_tlb = 1;
-+	if (*arg == ',') {
-+		unsigned long ul;
-+		int err = kstrtoul(arg + 1, 0, &ul);
-+		if (err < 0) {
-+			num_tlb = 1;
-+			pr_warn("ERROR, usdpaa_mem arg is invalid\n");
-+		} else
-+			num_tlb = (unsigned int)ul;
-+	}
-+	return 0;
-+}
-+early_param("usdpaa_mem", usdpaa_mem);
-+
-+static int usdpaa_mem_init(struct reserved_mem *rmem)
-+{
-+	phys_start = rmem->base;
-+	phys_size = rmem->size;
-+
-+	WARN_ON(!(phys_start && phys_size));
-+
-+	return 0;
-+}
-+RESERVEDMEM_OF_DECLARE(usdpaa_mem_init, "fsl,usdpaa-mem", usdpaa_mem_init);
-+
-+__init int fsl_usdpaa_init_early(void)
-+{
-+	if (!phys_size || !phys_start) {
-+		pr_info("No USDPAA memory, no 'fsl,usdpaa-mem' in device-tree\n");
-+		return 0;
-+	}
-+	if (phys_size % PAGE_SIZE) {
-+		pr_err("'fsl,usdpaa-mem' size must be a multiple of page size\n");
-+		phys_size = 0;
-+		return 0;
-+	}
-+	if (arg_phys_size && phys_size != arg_phys_size) {
-+		pr_err("'usdpaa_mem argument size (0x%llx) does not match device tree size (0x%llx)\n",
-+		       arg_phys_size, phys_size);
-+		phys_size = 0;
-+		return 0;
-+	}
-+	pfn_start = phys_start >> PAGE_SHIFT;
-+	pfn_size = phys_size >> PAGE_SHIFT;
-+#ifdef CONFIG_PPC
-+	first_tlb = current_tlb = tlbcam_index;
-+	tlbcam_index += num_tlb;
-+#endif
-+	pr_info("USDPAA region at %llx:%llx(%lx:%lx), %d TLB1 entries)\n",
-+		phys_start, phys_size, pfn_start, pfn_size, num_tlb);
-+	return 0;
-+}
-+subsys_initcall(fsl_usdpaa_init_early);
-+
-+
-+static int __init usdpaa_init(void)
-+{
-+	struct mem_fragment *frag;
-+	int ret;
-+	u64 tmp_size = phys_size;
-+	u64 tmp_start = phys_start;
-+	u64 tmp_pfn_size = pfn_size;
-+	u64 tmp_pfn_start = pfn_start;
-+
-+	pr_info("Freescale USDPAA process driver\n");
-+	if (!phys_start) {
-+		pr_warn("fsl-usdpaa: no region found\n");
-+		return 0;
-+	}
-+
-+	while (tmp_size != 0) {
-+		u32 frag_size = largest_page_size(tmp_size);
-+		frag = kmalloc(sizeof(*frag), GFP_KERNEL);
-+		if (!frag) {
-+			pr_err("Failed to setup USDPAA memory accounting\n");
-+			return -ENOMEM;
-+		}
-+		frag->base = tmp_start;
-+		frag->len = frag->root_len = frag_size;
-+		frag->root_pfn = tmp_pfn_start;
-+		frag->pfn_base = tmp_pfn_start;
-+		frag->pfn_len = frag_size / PAGE_SIZE;
-+		frag->refs = 0;
-+		init_waitqueue_head(&frag->wq);
-+		frag->owner = NULL;
-+		list_add(&frag->list, &mem_list);
-+
-+		/* Adjust for this frag */
-+		tmp_start += frag_size;
-+		tmp_size -= frag_size;
-+		tmp_pfn_start += frag_size / PAGE_SIZE;
-+		tmp_pfn_size -= frag_size / PAGE_SIZE;
-+	}
-+	ret = misc_register(&usdpaa_miscdev);
-+	if (ret)
-+		pr_err("fsl-usdpaa: failed to register misc device\n");
-+	return ret;
-+}
-+
-+static void __exit usdpaa_exit(void)
-+{
-+	misc_deregister(&usdpaa_miscdev);
-+}
-+
-+module_init(usdpaa_init);
-+module_exit(usdpaa_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Freescale Semiconductor");
-+MODULE_DESCRIPTION("Freescale USDPAA process driver");
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/fsl_usdpaa_irq.c
-@@ -0,0 +1,289 @@
-+/* Copyright (c) 2013 Freescale Semiconductor, Inc.
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/* define a device that allows USPDAA processes to open a file
-+   descriptor and specify which IRQ it wants to montior using an ioctl()
-+   When an IRQ is received, the device becomes readable so that a process
-+   can use read() or select() type calls to monitor for IRQs */
-+
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
-+#include <linux/cdev.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/poll.h>
-+#include <linux/uaccess.h>
-+#include <linux/fsl_usdpaa.h>
-+#include <linux/module.h>
-+#include <linux/fdtable.h>
-+#include <linux/file.h>
-+
-+#include "qman_low.h"
-+#include "bman_low.h"
-+
-+struct usdpaa_irq_ctx {
-+	int irq_set; /* Set to true once the irq is set via ioctl */
-+	unsigned int irq_num;
-+	u32 last_irq_count; /* Last value returned from read */
-+	u32 irq_count; /* Number of irqs since last read */
-+	wait_queue_head_t wait_queue; /* Waiting processes */
-+	spinlock_t lock;
-+	void *inhibit_addr; /* inhibit register address */
-+	struct file *usdpaa_filp;
-+	char irq_name[128];
-+};
-+
-+static int usdpaa_irq_open(struct inode *inode, struct file *filp)
-+{
-+	struct usdpaa_irq_ctx *ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
-+	if (!ctx)
-+		return -ENOMEM;
-+	ctx->irq_set = 0;
-+	ctx->irq_count = 0;
-+	ctx->last_irq_count = 0;
-+	init_waitqueue_head(&ctx->wait_queue);
-+	spin_lock_init(&ctx->lock);
-+	filp->private_data = ctx;
-+	return 0;
-+}
-+
-+static int usdpaa_irq_release(struct inode *inode, struct file *filp)
-+{
-+	struct usdpaa_irq_ctx *ctx = filp->private_data;
-+	if (ctx->irq_set) {
-+		/* Inhibit the IRQ */
-+		out_be32(ctx->inhibit_addr, 0x1);
-+		irq_set_affinity_hint(ctx->irq_num, NULL);
-+		free_irq(ctx->irq_num, ctx);
-+		ctx->irq_set = 0;
-+		fput(ctx->usdpaa_filp);
-+	}
-+	kfree(filp->private_data);
-+	return 0;
-+}
-+
-+static irqreturn_t usdpaa_irq_handler(int irq, void *_ctx)
-+{
-+	unsigned long flags;
-+	struct usdpaa_irq_ctx *ctx = _ctx;
-+	spin_lock_irqsave(&ctx->lock, flags);
-+	++ctx->irq_count;
-+	spin_unlock_irqrestore(&ctx->lock, flags);
-+	wake_up_all(&ctx->wait_queue);
-+	/* Set the inhibit register.  This will be reenabled
-+	   once the USDPAA code handles the IRQ */
-+	out_be32(ctx->inhibit_addr, 0x1);
-+	pr_info("Inhibit at %p count %d", ctx->inhibit_addr, ctx->irq_count);
-+	return IRQ_HANDLED;
-+}
-+
-+static int map_irq(struct file *fp, struct usdpaa_ioctl_irq_map *irq_map)
-+{
-+	struct usdpaa_irq_ctx *ctx = fp->private_data;
-+	int ret;
-+
-+	if (ctx->irq_set) {
-+		pr_debug("Setting USDPAA IRQ when it was already set!\n");
-+		return -EBUSY;
-+	}
-+
-+	ctx->usdpaa_filp = fget(irq_map->fd);
-+	if (!ctx->usdpaa_filp) {
-+		pr_debug("USDPAA fget(%d) returned NULL\n", irq_map->fd);
-+		return -EINVAL;
-+	}
-+
-+	ret = usdpaa_get_portal_config(ctx->usdpaa_filp, irq_map->portal_cinh,
-+				       irq_map->type, &ctx->irq_num,
-+				       &ctx->inhibit_addr);
-+	if (ret) {
-+		pr_debug("USDPAA IRQ couldn't identify portal\n");
-+		fput(ctx->usdpaa_filp);
-+		return ret;
-+	}
-+
-+	ctx->irq_set = 1;
-+
-+	snprintf(ctx->irq_name, sizeof(ctx->irq_name),
-+		 "usdpaa_irq %d", ctx->irq_num);
-+
-+	ret = request_irq(ctx->irq_num, usdpaa_irq_handler, 0,
-+			  ctx->irq_name, ctx);
-+	if (ret) {
-+		pr_err("USDPAA request_irq(%d) failed, ret= %d\n",
-+		       ctx->irq_num, ret);
-+		ctx->irq_set = 0;
-+		fput(ctx->usdpaa_filp);
-+		return ret;
-+	}
-+	ret = irq_set_affinity(ctx->irq_num, &current->cpus_allowed);
-+	if (ret)
-+		pr_err("USDPAA irq_set_affinity() failed, ret= %d\n", ret);
-+
-+	ret = irq_set_affinity_hint(ctx->irq_num, &current->cpus_allowed);
-+	if (ret)
-+		pr_err("USDPAA irq_set_affinity_hint() failed, ret= %d\n", ret);
-+
-+	return 0;
-+}
-+
-+static long usdpaa_irq_ioctl(struct file *fp, unsigned int cmd,
-+			     unsigned long arg)
-+{
-+	int ret;
-+	struct usdpaa_ioctl_irq_map irq_map;
-+
-+	if (cmd != USDPAA_IOCTL_PORTAL_IRQ_MAP) {
-+		pr_debug("USDPAA IRQ unknown command 0x%x\n", cmd);
-+		return -EINVAL;
-+	}
-+
-+	ret = copy_from_user(&irq_map, (void __user *)arg,
-+			     sizeof(irq_map));
-+	if (ret)
-+		return ret;
-+	return map_irq(fp, &irq_map);
-+}
-+
-+static ssize_t usdpaa_irq_read(struct file *filp, char __user *buff,
-+			       size_t count, loff_t *offp)
-+{
-+	struct usdpaa_irq_ctx *ctx = filp->private_data;
-+	int ret;
-+
-+	if (!ctx->irq_set) {
-+		pr_debug("Reading USDPAA IRQ before it was set\n");
-+		return -EINVAL;
-+	}
-+
-+	if (count < sizeof(ctx->irq_count)) {
-+		pr_debug("USDPAA IRQ Read too small\n");
-+		return -EINVAL;
-+	}
-+	if (ctx->irq_count == ctx->last_irq_count) {
-+		if (filp->f_flags & O_NONBLOCK)
-+			return -EAGAIN;
-+
-+		ret = wait_event_interruptible(ctx->wait_queue,
-+				       ctx->irq_count != ctx->last_irq_count);
-+		if (ret == -ERESTARTSYS)
-+			return ret;
-+	}
-+
-+	ctx->last_irq_count = ctx->irq_count;
-+
-+	if (copy_to_user(buff, &ctx->last_irq_count,
-+			 sizeof(ctx->last_irq_count)))
-+		return -EFAULT;
-+	return sizeof(ctx->irq_count);
-+}
-+
-+static unsigned int usdpaa_irq_poll(struct file *filp, poll_table *wait)
-+{
-+	struct usdpaa_irq_ctx *ctx = filp->private_data;
-+	unsigned int ret = 0;
-+	unsigned long flags;
-+
-+	if (!ctx->irq_set)
-+		return POLLHUP;
-+
-+	poll_wait(filp, &ctx->wait_queue, wait);
-+
-+	spin_lock_irqsave(&ctx->lock, flags);
-+	if (ctx->irq_count != ctx->last_irq_count)
-+		ret |= POLLIN | POLLRDNORM;
-+	spin_unlock_irqrestore(&ctx->lock, flags);
-+	return ret;
-+}
-+
-+static long usdpaa_irq_ioctl_compat(struct file *fp, unsigned int cmd,
-+				unsigned long arg)
-+{
-+#ifdef CONFIG_COMPAT
-+	void __user *a = (void __user *)arg;
-+#endif
-+	switch (cmd) {
-+#ifdef CONFIG_COMPAT
-+	case  USDPAA_IOCTL_PORTAL_IRQ_MAP_COMPAT:
-+	{
-+		struct compat_ioctl_irq_map input;
-+		struct usdpaa_ioctl_irq_map converted;
-+		if (copy_from_user(&input, a, sizeof(input)))
-+			return -EFAULT;
-+		converted.type = input.type;
-+		converted.fd = input.fd;
-+		converted.portal_cinh = compat_ptr(input.portal_cinh);
-+		return map_irq(fp, &converted);
-+	}
-+#endif
-+	default:
-+		return usdpaa_irq_ioctl(fp, cmd, arg);
-+	}
-+}
-+
-+static const struct file_operations usdpaa_irq_fops = {
-+	.open		   = usdpaa_irq_open,
-+	.release	   = usdpaa_irq_release,
-+	.unlocked_ioctl	   = usdpaa_irq_ioctl,
-+	.compat_ioctl	   = usdpaa_irq_ioctl_compat,
-+	.read              = usdpaa_irq_read,
-+	.poll              = usdpaa_irq_poll
-+};
-+
-+static struct miscdevice usdpaa_miscdev = {
-+	.name = "fsl-usdpaa-irq",
-+	.fops = &usdpaa_irq_fops,
-+	.minor = MISC_DYNAMIC_MINOR,
-+};
-+
-+static int __init usdpaa_irq_init(void)
-+{
-+	int ret;
-+
-+	pr_info("Freescale USDPAA process IRQ driver\n");
-+	ret = misc_register(&usdpaa_miscdev);
-+	if (ret)
-+		pr_err("fsl-usdpaa-irq: failed to register misc device\n");
-+	return ret;
-+}
-+
-+static void __exit usdpaa_irq_exit(void)
-+{
-+	misc_deregister(&usdpaa_miscdev);
-+}
-+
-+module_init(usdpaa_irq_init);
-+module_exit(usdpaa_irq_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Freescale Semiconductor");
-+MODULE_DESCRIPTION("Freescale USDPAA process IRQ driver");
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/qbman_driver.c
-@@ -0,0 +1,88 @@
-+/* Copyright 2013 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/time.h>
-+#include "qman_private.h"
-+#include "bman_private.h"
-+__init void qman_init_early(void);
-+__init void bman_init_early(void);
-+
-+static __init int qbman_init(void)
-+{
-+	struct device_node *dn;
-+	u32 is_portal_available;
-+
-+	bman_init();
-+	qman_init();
-+
-+	is_portal_available = 0;
-+	for_each_compatible_node(dn, NULL, "fsl,qman-portal") {
-+		if (!of_device_is_available(dn))
-+			continue;
-+		else
-+			is_portal_available = 1;
-+	}
-+
-+	if (!qman_have_ccsr() && is_portal_available) {
-+		struct qman_fq fq = {
-+				.fqid = 1
-+		};
-+		struct qm_mcr_queryfq_np np;
-+		int err, retry = CONFIG_FSL_QMAN_INIT_TIMEOUT;
-+		struct timespec nowts, diffts, startts = current_kernel_time();
-+		/* Loop while querying given fqid succeeds or time out */
-+		while (1) {
-+			err = qman_query_fq_np(&fq, &np);
-+			if (!err) {
-+				/* success, control-plane has configured QMan */
-+				break;
-+			} else if (err != -ERANGE) {
-+				pr_err("QMan: I/O error, continuing anyway\n");
-+				break;
-+			}
-+			nowts = current_kernel_time();
-+			diffts = timespec_sub(nowts, startts);
-+			if (diffts.tv_sec > 0) {
-+				if (!retry--) {
-+					pr_err("QMan: time out, control-plane"
-+								" dead?\n");
-+					break;
-+				}
-+				pr_warn("QMan: polling for the control-plane"
-+							" (%d)\n", retry);
-+			}
-+		}
-+	}
-+	bman_resource_init();
-+	qman_resource_init();
-+	return 0;
-+}
-+subsys_initcall(qbman_init);
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/qman_config.c
-@@ -0,0 +1,1224 @@
-+/* Copyright 2008-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <asm/cacheflush.h>
-+#include "qman_private.h"
-+#include <linux/highmem.h>
-+#include <linux/of_reserved_mem.h>
-+
-+/* Last updated for v00.800 of the BG */
-+
-+/* Register offsets */
-+#define REG_QCSP_LIO_CFG(n)	(0x0000 + ((n) * 0x10))
-+#define REG_QCSP_IO_CFG(n)	(0x0004 + ((n) * 0x10))
-+#define REG_QCSP_DD_CFG(n)	(0x000c + ((n) * 0x10))
-+#define REG_DD_CFG		0x0200
-+#define REG_DCP_CFG(n)		(0x0300 + ((n) * 0x10))
-+#define REG_DCP_DD_CFG(n)	(0x0304 + ((n) * 0x10))
-+#define REG_DCP_DLM_AVG(n)	(0x030c + ((n) * 0x10))
-+#define REG_PFDR_FPC		0x0400
-+#define REG_PFDR_FP_HEAD	0x0404
-+#define REG_PFDR_FP_TAIL	0x0408
-+#define REG_PFDR_FP_LWIT	0x0410
-+#define REG_PFDR_CFG		0x0414
-+#define REG_SFDR_CFG		0x0500
-+#define REG_SFDR_IN_USE		0x0504
-+#define REG_WQ_CS_CFG(n)	(0x0600 + ((n) * 0x04))
-+#define REG_WQ_DEF_ENC_WQID	0x0630
-+#define REG_WQ_SC_DD_CFG(n)	(0x640 + ((n) * 0x04))
-+#define REG_WQ_PC_DD_CFG(n)	(0x680 + ((n) * 0x04))
-+#define REG_WQ_DC0_DD_CFG(n)	(0x6c0 + ((n) * 0x04))
-+#define REG_WQ_DC1_DD_CFG(n)	(0x700 + ((n) * 0x04))
-+#define REG_WQ_DCn_DD_CFG(n)	(0x6c0 + ((n) * 0x40)) /* n=2,3 */
-+#define REG_CM_CFG		0x0800
-+#define REG_ECSR		0x0a00
-+#define REG_ECIR		0x0a04
-+#define REG_EADR		0x0a08
-+#define REG_ECIR2		0x0a0c
-+#define REG_EDATA(n)		(0x0a10 + ((n) * 0x04))
-+#define REG_SBEC(n)		(0x0a80 + ((n) * 0x04))
-+#define REG_MCR			0x0b00
-+#define REG_MCP(n)		(0x0b04 + ((n) * 0x04))
-+#define REG_MISC_CFG		0x0be0
-+#define REG_HID_CFG		0x0bf0
-+#define REG_IDLE_STAT		0x0bf4
-+#define REG_IP_REV_1		0x0bf8
-+#define REG_IP_REV_2		0x0bfc
-+#define REG_FQD_BARE		0x0c00
-+#define REG_PFDR_BARE		0x0c20
-+#define REG_offset_BAR		0x0004	/* relative to REG_[FQD|PFDR]_BARE */
-+#define REG_offset_AR		0x0010	/* relative to REG_[FQD|PFDR]_BARE */
-+#define REG_QCSP_BARE		0x0c80
-+#define REG_QCSP_BAR		0x0c84
-+#define REG_CI_SCHED_CFG	0x0d00
-+#define REG_SRCIDR		0x0d04
-+#define REG_LIODNR		0x0d08
-+#define REG_CI_RLM_AVG		0x0d14
-+#define REG_ERR_ISR		0x0e00	/* + "enum qm_isr_reg" */
-+#define REG_REV3_QCSP_LIO_CFG(n)	(0x1000 + ((n) * 0x10))
-+#define REG_REV3_QCSP_IO_CFG(n)	(0x1004 + ((n) * 0x10))
-+#define REG_REV3_QCSP_DD_CFG(n)	(0x100c + ((n) * 0x10))
-+#define REG_CEETM_CFG_IDX	0x900
-+#define REG_CEETM_CFG_PRES	0x904
-+#define REG_CEETM_XSFDR_IN_USE	0x908
-+
-+/* Assists for QMAN_MCR */
-+#define MCR_INIT_PFDR		0x01000000
-+#define MCR_get_rslt(v)		(u8)((v) >> 24)
-+#define MCR_rslt_idle(r)	(!rslt || (rslt >= 0xf0))
-+#define MCR_rslt_ok(r)		(rslt == 0xf0)
-+#define MCR_rslt_eaccess(r)	(rslt == 0xf8)
-+#define MCR_rslt_inval(r)	(rslt == 0xff)
-+
-+struct qman;
-+
-+/* Follows WQ_CS_CFG0-5 */
-+enum qm_wq_class {
-+	qm_wq_portal = 0,
-+	qm_wq_pool = 1,
-+	qm_wq_fman0 = 2,
-+	qm_wq_fman1 = 3,
-+	qm_wq_caam = 4,
-+	qm_wq_pme = 5,
-+	qm_wq_first = qm_wq_portal,
-+	qm_wq_last = qm_wq_pme
-+};
-+
-+/* Follows FQD_[BARE|BAR|AR] and PFDR_[BARE|BAR|AR] */
-+enum qm_memory {
-+	qm_memory_fqd,
-+	qm_memory_pfdr
-+};
-+
-+/* Used by all error interrupt registers except 'inhibit' */
-+#define QM_EIRQ_CIDE	0x20000000	/* Corenet Initiator Data Error */
-+#define QM_EIRQ_CTDE	0x10000000	/* Corenet Target Data Error */
-+#define QM_EIRQ_CITT	0x08000000	/* Corenet Invalid Target Transaction */
-+#define QM_EIRQ_PLWI	0x04000000	/* PFDR Low Watermark */
-+#define QM_EIRQ_MBEI	0x02000000	/* Multi-bit ECC Error */
-+#define QM_EIRQ_SBEI	0x01000000	/* Single-bit ECC Error */
-+#define QM_EIRQ_PEBI	0x00800000	/* PFDR Enqueues Blocked Interrupt */
-+#define QM_EIRQ_IFSI	0x00020000	/* Invalid FQ Flow Control State */
-+#define QM_EIRQ_ICVI	0x00010000	/* Invalid Command Verb */
-+#define QM_EIRQ_IDDI	0x00000800	/* Invalid Dequeue (Direct-connect) */
-+#define QM_EIRQ_IDFI	0x00000400	/* Invalid Dequeue FQ */
-+#define QM_EIRQ_IDSI	0x00000200	/* Invalid Dequeue Source */
-+#define QM_EIRQ_IDQI	0x00000100	/* Invalid Dequeue Queue */
-+#define QM_EIRQ_IECE	0x00000010	/* Invalid Enqueue Configuration */
-+#define QM_EIRQ_IEOI	0x00000008	/* Invalid Enqueue Overflow */
-+#define QM_EIRQ_IESI	0x00000004	/* Invalid Enqueue State */
-+#define QM_EIRQ_IECI	0x00000002	/* Invalid Enqueue Channel */
-+#define QM_EIRQ_IEQI	0x00000001	/* Invalid Enqueue Queue */
-+
-+/* QMAN_ECIR valid error bit */
-+#define PORTAL_ECSR_ERR	(QM_EIRQ_IEQI | QM_EIRQ_IESI | QM_EIRQ_IEOI | \
-+				QM_EIRQ_IDQI | QM_EIRQ_IDSI | QM_EIRQ_IDFI | \
-+				QM_EIRQ_IDDI | QM_EIRQ_ICVI | QM_EIRQ_IFSI)
-+#define FQID_ECSR_ERR	(QM_EIRQ_IEQI | QM_EIRQ_IECI | QM_EIRQ_IESI | \
-+			QM_EIRQ_IEOI | QM_EIRQ_IDQI | QM_EIRQ_IDFI | \
-+			QM_EIRQ_IFSI)
-+
-+union qman_ecir {
-+	u32 ecir_raw;
-+	struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+		u32 __reserved:2;
-+		u32 portal_type:1;
-+		u32 portal_num:5;
-+		u32 fqid:24;
-+#else
-+		u32 fqid:24;
-+		u32 portal_num:5;
-+		u32 portal_type:1;
-+		u32 __reserved:2;
-+#endif
-+	} __packed info;
-+};
-+
-+union qman_ecir2 {
-+	u32 ecir2_raw;
-+	struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+		u32 portal_type:1;
-+		u32 __reserved:21;
-+		u32 portal_num:10;
-+#else
-+		u32 portal_num:10;
-+		u32 __reserved:21;
-+		u32 portal_type:1;
-+#endif
-+	} __packed info;
-+};
-+
-+union qman_eadr {
-+	u32 eadr_raw;
-+	struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+		u32 __reserved1:4;
-+		u32 memid:4;
-+		u32 __reserved2:12;
-+		u32 eadr:12;
-+#else
-+		u32 eadr:12;
-+		u32 __reserved2:12;
-+		u32 memid:4;
-+		u32 __reserved1:4;
-+#endif
-+	} __packed info;
-+	struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+		u32 __reserved1:3;
-+		u32 memid:5;
-+		u32 __reserved:8;
-+		u32 eadr:16;
-+#else
-+		u32 eadr:16;
-+		u32 __reserved:8;
-+		u32 memid:5;
-+		u32 __reserved1:3;
-+#endif
-+	} __packed info_rev3;
-+};
-+
-+struct qman_hwerr_txt {
-+	u32 mask;
-+	const char *txt;
-+};
-+
-+#define QMAN_HWE_TXT(a, b) { .mask = QM_EIRQ_##a, .txt = b }
-+
-+static const struct qman_hwerr_txt qman_hwerr_txts[] = {
-+	QMAN_HWE_TXT(CIDE, "Corenet Initiator Data Error"),
-+	QMAN_HWE_TXT(CTDE, "Corenet Target Data Error"),
-+	QMAN_HWE_TXT(CITT, "Corenet Invalid Target Transaction"),
-+	QMAN_HWE_TXT(PLWI, "PFDR Low Watermark"),
-+	QMAN_HWE_TXT(MBEI, "Multi-bit ECC Error"),
-+	QMAN_HWE_TXT(SBEI, "Single-bit ECC Error"),
-+	QMAN_HWE_TXT(PEBI, "PFDR Enqueues Blocked Interrupt"),
-+	QMAN_HWE_TXT(ICVI, "Invalid Command Verb"),
-+	QMAN_HWE_TXT(IFSI, "Invalid Flow Control State"),
-+	QMAN_HWE_TXT(IDDI, "Invalid Dequeue (Direct-connect)"),
-+	QMAN_HWE_TXT(IDFI, "Invalid Dequeue FQ"),
-+	QMAN_HWE_TXT(IDSI, "Invalid Dequeue Source"),
-+	QMAN_HWE_TXT(IDQI, "Invalid Dequeue Queue"),
-+	QMAN_HWE_TXT(IECE, "Invalid Enqueue Configuration"),
-+	QMAN_HWE_TXT(IEOI, "Invalid Enqueue Overflow"),
-+	QMAN_HWE_TXT(IESI, "Invalid Enqueue State"),
-+	QMAN_HWE_TXT(IECI, "Invalid Enqueue Channel"),
-+	QMAN_HWE_TXT(IEQI, "Invalid Enqueue Queue")
-+};
-+#define QMAN_HWE_COUNT (sizeof(qman_hwerr_txts)/sizeof(struct qman_hwerr_txt))
-+
-+struct qman_error_info_mdata {
-+	u16 addr_mask;
-+	u16 bits;
-+	const char *txt;
-+};
-+
-+#define QMAN_ERR_MDATA(a, b, c) { .addr_mask = a, .bits = b, .txt = c}
-+static const struct qman_error_info_mdata error_mdata[] = {
-+	QMAN_ERR_MDATA(0x01FF, 24, "FQD cache tag memory 0"),
-+	QMAN_ERR_MDATA(0x01FF, 24, "FQD cache tag memory 1"),
-+	QMAN_ERR_MDATA(0x01FF, 24, "FQD cache tag memory 2"),
-+	QMAN_ERR_MDATA(0x01FF, 24, "FQD cache tag memory 3"),
-+	QMAN_ERR_MDATA(0x0FFF, 512, "FQD cache memory"),
-+	QMAN_ERR_MDATA(0x07FF, 128, "SFDR memory"),
-+	QMAN_ERR_MDATA(0x01FF, 72, "WQ context memory"),
-+	QMAN_ERR_MDATA(0x00FF, 240, "CGR memory"),
-+	QMAN_ERR_MDATA(0x00FF, 302, "Internal Order Restoration List memory"),
-+	QMAN_ERR_MDATA(0x01FF, 256, "SW portal ring memory"),
-+	QMAN_ERR_MDATA(0x07FF, 181, "CEETM class queue descriptor memory"),
-+	QMAN_ERR_MDATA(0x0FFF, 140, "CEETM extended SFDR memory"),
-+	QMAN_ERR_MDATA(0x0FFF, 25, "CEETM logical FQ mapping memory"),
-+	QMAN_ERR_MDATA(0x0FFF, 96, "CEETM dequeue context memory"),
-+	QMAN_ERR_MDATA(0x07FF, 396, "CEETM ccgr memory"),
-+	QMAN_ERR_MDATA(0x00FF, 146, "CEETM CQ channel shaping memory"),
-+	QMAN_ERR_MDATA(0x007F, 256, "CEETM CQ channel scheduling memory"),
-+	QMAN_ERR_MDATA(0x01FF, 88, "CEETM dequeue statistics memory"),
-+};
-+#define QMAN_ERR_MDATA_COUNT \
-+	(sizeof(error_mdata)/sizeof(struct qman_error_info_mdata))
-+
-+/* Add this in Kconfig */
-+#define QMAN_ERRS_TO_UNENABLE (QM_EIRQ_PLWI | QM_EIRQ_PEBI)
-+
-+/**
-+ * qm_err_isr_<reg>_<verb> - Manipulate global interrupt registers
-+ * @v: for accessors that write values, this is the 32-bit value
-+ *
-+ * Manipulates QMAN_ERR_ISR, QMAN_ERR_IER, QMAN_ERR_ISDR, QMAN_ERR_IIR. All
-+ * manipulations except qm_err_isr_[un]inhibit() use 32-bit masks composed of
-+ * the QM_EIRQ_*** definitions. Note that "qm_err_isr_enable_write" means
-+ * "write the enable register" rather than "enable the write register"!
-+ */
-+#define qm_err_isr_status_read(qm)	\
-+		__qm_err_isr_read(qm, qm_isr_status)
-+#define qm_err_isr_status_clear(qm, m)	\
-+		__qm_err_isr_write(qm, qm_isr_status, m)
-+#define qm_err_isr_enable_read(qm)	\
-+		__qm_err_isr_read(qm, qm_isr_enable)
-+#define qm_err_isr_enable_write(qm, v)	\
-+		__qm_err_isr_write(qm, qm_isr_enable, v)
-+#define qm_err_isr_disable_read(qm)	\
-+		__qm_err_isr_read(qm, qm_isr_disable)
-+#define qm_err_isr_disable_write(qm, v)	\
-+		__qm_err_isr_write(qm, qm_isr_disable, v)
-+#define qm_err_isr_inhibit(qm)		\
-+		__qm_err_isr_write(qm, qm_isr_inhibit, 1)
-+#define qm_err_isr_uninhibit(qm)	\
-+		__qm_err_isr_write(qm, qm_isr_inhibit, 0)
-+
-+/*
-+ * TODO: unimplemented registers
-+ *
-+ * Keeping a list here of Qman registers I have not yet covered;
-+ * QCSP_DD_IHRSR, QCSP_DD_IHRFR, QCSP_DD_HASR,
-+ * DCP_DD_IHRSR, DCP_DD_IHRFR, DCP_DD_HASR, CM_CFG,
-+ * QMAN_EECC, QMAN_SBET, QMAN_EINJ, QMAN_SBEC0-12
-+ */
-+
-+/* Encapsulate "struct qman *" as a cast of the register space address. */
-+
-+static struct qman *qm_create(void *regs)
-+{
-+	return (struct qman *)regs;
-+}
-+
-+static inline u32 __qm_in(struct qman *qm, u32 offset)
-+{
-+	return in_be32((void *)qm + offset);
-+}
-+static inline void __qm_out(struct qman *qm, u32 offset, u32 val)
-+{
-+	out_be32((void *)qm + offset, val);
-+}
-+#define qm_in(reg)		__qm_in(qm, REG_##reg)
-+#define qm_out(reg, val)	__qm_out(qm, REG_##reg, val)
-+
-+static u32 __qm_err_isr_read(struct qman *qm, enum qm_isr_reg n)
-+{
-+	return __qm_in(qm, REG_ERR_ISR + (n << 2));
-+}
-+
-+static void __qm_err_isr_write(struct qman *qm, enum qm_isr_reg n, u32 val)
-+{
-+	__qm_out(qm, REG_ERR_ISR + (n << 2), val);
-+}
-+
-+static void qm_set_dc(struct qman *qm, enum qm_dc_portal portal,
-+			int ed, u8 sernd)
-+{
-+	DPA_ASSERT(!ed || (portal == qm_dc_portal_fman0) ||
-+			(portal == qm_dc_portal_fman1));
-+	if ((qman_ip_rev & 0xFF00) >= QMAN_REV30)
-+		qm_out(DCP_CFG(portal), (ed ? 0x1000 : 0) | (sernd & 0x3ff));
-+	else
-+		qm_out(DCP_CFG(portal), (ed ? 0x100 : 0) | (sernd & 0x1f));
-+}
-+
-+static void qm_set_wq_scheduling(struct qman *qm, enum qm_wq_class wq_class,
-+			u8 cs_elev, u8 csw2, u8 csw3, u8 csw4, u8 csw5,
-+			u8 csw6, u8 csw7)
-+{
-+	qm_out(WQ_CS_CFG(wq_class), ((cs_elev & 0xff) << 24) |
-+		((csw2 & 0x7) << 20) | ((csw3 & 0x7) << 16) |
-+		((csw4 & 0x7) << 12) | ((csw5 & 0x7) << 8) |
-+		((csw6 & 0x7) << 4) | (csw7 & 0x7));
-+}
-+
-+static void qm_set_hid(struct qman *qm)
-+{
-+	qm_out(HID_CFG, 0);
-+}
-+
-+static void qm_set_corenet_initiator(struct qman *qm)
-+{
-+	qm_out(CI_SCHED_CFG,
-+		0x80000000 | /* write srcciv enable */
-+		(CONFIG_FSL_QMAN_CI_SCHED_CFG_SRCCIV << 24) |
-+		(CONFIG_FSL_QMAN_CI_SCHED_CFG_SRQ_W << 8) |
-+		(CONFIG_FSL_QMAN_CI_SCHED_CFG_RW_W << 4) |
-+		CONFIG_FSL_QMAN_CI_SCHED_CFG_BMAN_W);
-+}
-+
-+static void qm_get_version(struct qman *qm, u16 *id, u8 *major, u8 *minor,
-+			u8 *cfg)
-+{
-+	u32 v = qm_in(IP_REV_1);
-+	u32 v2 = qm_in(IP_REV_2);
-+	*id = (v >> 16);
-+	*major = (v >> 8) & 0xff;
-+	*minor = v & 0xff;
-+	*cfg = v2 & 0xff;
-+}
-+
-+static void qm_set_memory(struct qman *qm, enum qm_memory memory, u64 ba,
-+			int enable, int prio, int stash, u32 size)
-+{
-+	u32 offset = (memory == qm_memory_fqd) ? REG_FQD_BARE : REG_PFDR_BARE;
-+	u32 exp = ilog2(size);
-+	/* choke if size isn't within range */
-+	DPA_ASSERT((size >= 4096) && (size <= 1073741824) &&
-+			is_power_of_2(size));
-+	/* choke if 'ba' has lower-alignment than 'size' */
-+	DPA_ASSERT(!(ba & (size - 1)));
-+	__qm_out(qm, offset, upper_32_bits(ba));
-+	__qm_out(qm, offset + REG_offset_BAR, lower_32_bits(ba));
-+	__qm_out(qm, offset + REG_offset_AR,
-+		(enable ? 0x80000000 : 0) |
-+		(prio ? 0x40000000 : 0) |
-+		(stash ? 0x20000000 : 0) |
-+		(exp - 1));
-+}
-+
-+static void qm_set_pfdr_threshold(struct qman *qm, u32 th, u8 k)
-+{
-+	qm_out(PFDR_FP_LWIT, th & 0xffffff);
-+	qm_out(PFDR_CFG, k);
-+}
-+
-+static void qm_set_sfdr_threshold(struct qman *qm, u16 th)
-+{
-+	qm_out(SFDR_CFG, th & 0x3ff);
-+}
-+
-+static int qm_init_pfdr(struct qman *qm, u32 pfdr_start, u32 num)
-+{
-+	u8 rslt = MCR_get_rslt(qm_in(MCR));
-+
-+	DPA_ASSERT(pfdr_start && !(pfdr_start & 7) && !(num & 7) && num);
-+	/* Make sure the command interface is 'idle' */
-+	if (!MCR_rslt_idle(rslt))
-+		panic("QMAN_MCR isn't idle");
-+
-+	/* Write the MCR command params then the verb */
-+	qm_out(MCP(0), pfdr_start);
-+	/* TODO: remove this - it's a workaround for a model bug that is
-+	 * corrected in more recent versions. We use the workaround until
-+	 * everyone has upgraded. */
-+	qm_out(MCP(1), (pfdr_start + num - 16));
-+	lwsync();
-+	qm_out(MCR, MCR_INIT_PFDR);
-+	/* Poll for the result */
-+	do {
-+		rslt = MCR_get_rslt(qm_in(MCR));
-+	} while (!MCR_rslt_idle(rslt));
-+	if (MCR_rslt_ok(rslt))
-+		return 0;
-+	if (MCR_rslt_eaccess(rslt))
-+		return -EACCES;
-+	if (MCR_rslt_inval(rslt))
-+		return -EINVAL;
-+	pr_crit("Unexpected result from MCR_INIT_PFDR: %02x\n", rslt);
-+	return -ENOSYS;
-+}
-+
-+/*****************/
-+/* Config driver */
-+/*****************/
-+
-+#define DEFAULT_FQD_SZ	(PAGE_SIZE << CONFIG_FSL_QMAN_FQD_SZ)
-+#define DEFAULT_PFDR_SZ	(PAGE_SIZE << CONFIG_FSL_QMAN_PFDR_SZ)
-+
-+/* We support only one of these */
-+static struct qman *qm;
-+static struct device_node *qm_node;
-+
-+/* And this state belongs to 'qm'. It is set during fsl_qman_init(), but used
-+ * during qman_init_ccsr(). */
-+static dma_addr_t fqd_a, pfdr_a;
-+static size_t fqd_sz = DEFAULT_FQD_SZ, pfdr_sz = DEFAULT_PFDR_SZ;
-+
-+static int qman_fqd(struct reserved_mem *rmem)
-+{
-+	fqd_a = rmem->base;
-+	fqd_sz = rmem->size;
-+
-+	WARN_ON(!(fqd_a && fqd_sz));
-+
-+	return 0;
-+}
-+RESERVEDMEM_OF_DECLARE(qman_fqd, "fsl,qman-fqd", qman_fqd);
-+
-+static int qman_pfdr(struct reserved_mem *rmem)
-+{
-+	pfdr_a = rmem->base;
-+	pfdr_sz = rmem->size;
-+
-+	WARN_ON(!(pfdr_a && pfdr_sz));
-+
-+	return 0;
-+}
-+RESERVEDMEM_OF_DECLARE(qman_fbpr, "fsl,qman-pfdr", qman_pfdr);
-+
-+size_t get_qman_fqd_size()
-+{
-+	return fqd_sz;
-+}
-+
-+/* Parse the <name> property to extract the memory location and size and
-+ * memblock_reserve() it. If it isn't supplied, memblock_alloc() the default
-+ * size. Also flush this memory range from data cache so that QMAN originated
-+ * transactions for this memory region could be marked non-coherent.
-+ */
-+static __init int parse_mem_property(struct device_node *node, const char *name,
-+				dma_addr_t *addr, size_t *sz, int zero)
-+{
-+	int ret;
-+
-+	/* If using a "zero-pma", don't try to zero it, even if you asked */
-+	if (zero && of_find_property(node, "zero-pma", &ret)) {
-+		pr_info("  it's a 'zero-pma', not zeroing from s/w\n");
-+		zero = 0;
-+	}
-+
-+	if (zero) {
-+		/* map as cacheable, non-guarded */
-+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+		void __iomem *tmpp = ioremap_cache(*addr, *sz);
-+#else
-+		void __iomem *tmpp = ioremap(*addr, *sz);
-+#endif
-+
-+		if (!tmpp)
-+			return -ENOMEM;
-+		memset_io(tmpp, 0, *sz);
-+		flush_dcache_range((unsigned long)tmpp,
-+				   (unsigned long)tmpp + *sz);
-+		iounmap(tmpp);
-+	}
-+
-+	return 0;
-+}
-+
-+/* TODO:
-+ * - there is obviously no handling of errors,
-+ * - the calls to qm_set_memory() hard-code the priority and CPC-stashing for
-+ *   both memory resources to zero.
-+ */
-+static int __init fsl_qman_init(struct device_node *node)
-+{
-+	struct resource res;
-+	resource_size_t len;
-+	u32 __iomem *regs;
-+	const char *s;
-+	int ret, standby = 0;
-+	u16 id;
-+	u8 major, minor, cfg;
-+	ret = of_address_to_resource(node, 0, &res);
-+	if (ret) {
-+		pr_err("Can't get %s property '%s'\n", node->full_name, "reg");
-+		return ret;
-+	}
-+	s = of_get_property(node, "fsl,hv-claimable", &ret);
-+	if (s && !strcmp(s, "standby"))
-+		standby = 1;
-+	if (!standby) {
-+		ret = parse_mem_property(node, "fsl,qman-fqd",
-+					&fqd_a, &fqd_sz, 1);
-+		pr_info("qman-fqd addr %pad size 0x%zx\n", &fqd_a, fqd_sz);
-+		BUG_ON(ret);
-+		ret = parse_mem_property(node, "fsl,qman-pfdr",
-+					&pfdr_a, &pfdr_sz, 0);
-+		pr_info("qman-pfdr addr %pad size 0x%zx\n", &pfdr_a, pfdr_sz);
-+		BUG_ON(ret);
-+	}
-+	/* Global configuration */
-+	len = resource_size(&res);
-+	if (len != (unsigned long)len)
-+		return -EINVAL;
-+	regs = ioremap(res.start, (unsigned long)len);
-+	qm = qm_create(regs);
-+	qm_node = node;
-+	qm_get_version(qm, &id, &major, &minor, &cfg);
-+	pr_info("Qman ver:%04x,%02x,%02x,%02x\n", id, major, minor, cfg);
-+	if (!qman_ip_rev) {
-+		if ((major == 1) && (minor == 0)) {
-+			pr_err("QMAN rev1.0 on P4080 rev1 is not supported!\n");
-+			iounmap(regs);
-+			return -ENODEV;
-+		} else if ((major == 1) && (minor == 1))
-+			qman_ip_rev = QMAN_REV11;
-+		else if	((major == 1) && (minor == 2))
-+			qman_ip_rev = QMAN_REV12;
-+		else if ((major == 2) && (minor == 0))
-+			qman_ip_rev = QMAN_REV20;
-+		else if ((major == 3) && (minor == 0))
-+			qman_ip_rev = QMAN_REV30;
-+		else if ((major == 3) && (minor == 1))
-+			qman_ip_rev = QMAN_REV31;
-+		else if ((major == 3) && (minor == 2))
-+			qman_ip_rev = QMAN_REV32;
-+		else {
-+			pr_warn("unknown Qman version, default to rev1.1\n");
-+			qman_ip_rev = QMAN_REV11;
-+		}
-+		qman_ip_cfg = cfg;
-+	}
-+
-+	if (standby) {
-+		pr_info("  -> in standby mode\n");
-+		return 0;
-+	}
-+	return 0;
-+}
-+
-+int qman_have_ccsr(void)
-+{
-+	return qm ? 1 : 0;
-+}
-+
-+__init int qman_init_early(void)
-+{
-+	struct device_node *dn;
-+	int ret;
-+
-+	for_each_compatible_node(dn, NULL, "fsl,qman") {
-+		if (qm)
-+			pr_err("%s: only one 'fsl,qman' allowed\n",
-+				dn->full_name);
-+		else {
-+			if (!of_device_is_available(dn))
-+				continue;
-+
-+			ret = fsl_qman_init(dn);
-+			BUG_ON(ret);
-+		}
-+	}
-+	return 0;
-+}
-+postcore_initcall_sync(qman_init_early);
-+
-+static void log_edata_bits(u32 bit_count)
-+{
-+	u32 i, j, mask = 0xffffffff;
-+
-+	pr_warn("Qman ErrInt, EDATA:\n");
-+	i = bit_count/32;
-+	if (bit_count%32) {
-+		i++;
-+		mask = ~(mask << bit_count%32);
-+	}
-+	j = 16-i;
-+	pr_warn("  0x%08x\n", qm_in(EDATA(j)) & mask);
-+	j++;
-+	for (; j < 16; j++)
-+		pr_warn("  0x%08x\n", qm_in(EDATA(j)));
-+}
-+
-+static void log_additional_error_info(u32 isr_val, u32 ecsr_val)
-+{
-+	union qman_ecir ecir_val;
-+	union qman_eadr eadr_val;
-+
-+	ecir_val.ecir_raw = qm_in(ECIR);
-+	/* Is portal info valid */
-+	if ((qman_ip_rev & 0xFF00) >= QMAN_REV30) {
-+		union qman_ecir2 ecir2_val;
-+		ecir2_val.ecir2_raw = qm_in(ECIR2);
-+		if (ecsr_val & PORTAL_ECSR_ERR) {
-+			pr_warn("Qman ErrInt: %s id %d\n",
-+				(ecir2_val.info.portal_type) ?
-+				"DCP" : "SWP", ecir2_val.info.portal_num);
-+		}
-+		if (ecsr_val & (FQID_ECSR_ERR | QM_EIRQ_IECE)) {
-+			pr_warn("Qman ErrInt: ecir.fqid 0x%x\n",
-+				ecir_val.info.fqid);
-+		}
-+		if (ecsr_val & (QM_EIRQ_SBEI|QM_EIRQ_MBEI)) {
-+			eadr_val.eadr_raw = qm_in(EADR);
-+			pr_warn("Qman ErrInt: EADR Memory: %s, 0x%x\n",
-+				error_mdata[eadr_val.info_rev3.memid].txt,
-+				error_mdata[eadr_val.info_rev3.memid].addr_mask
-+					& eadr_val.info_rev3.eadr);
-+			log_edata_bits(
-+				error_mdata[eadr_val.info_rev3.memid].bits);
-+		}
-+	} else {
-+		if (ecsr_val & PORTAL_ECSR_ERR) {
-+			pr_warn("Qman ErrInt: %s id %d\n",
-+				(ecir_val.info.portal_type) ?
-+				"DCP" : "SWP", ecir_val.info.portal_num);
-+		}
-+		if (ecsr_val & FQID_ECSR_ERR) {
-+			pr_warn("Qman ErrInt: ecir.fqid 0x%x\n",
-+				ecir_val.info.fqid);
-+		}
-+		if (ecsr_val & (QM_EIRQ_SBEI|QM_EIRQ_MBEI)) {
-+			eadr_val.eadr_raw = qm_in(EADR);
-+			pr_warn("Qman ErrInt: EADR Memory: %s, 0x%x\n",
-+				error_mdata[eadr_val.info.memid].txt,
-+				error_mdata[eadr_val.info.memid].addr_mask
-+					& eadr_val.info.eadr);
-+			log_edata_bits(error_mdata[eadr_val.info.memid].bits);
-+		}
-+	}
-+}
-+
-+/* Qman interrupt handler */
-+static irqreturn_t qman_isr(int irq, void *ptr)
-+{
-+	u32 isr_val, ier_val, ecsr_val, isr_mask, i;
-+
-+	ier_val = qm_err_isr_enable_read(qm);
-+	isr_val = qm_err_isr_status_read(qm);
-+	ecsr_val = qm_in(ECSR);
-+	isr_mask = isr_val & ier_val;
-+
-+	if (!isr_mask)
-+		return IRQ_NONE;
-+	for (i = 0; i < QMAN_HWE_COUNT; i++) {
-+		if (qman_hwerr_txts[i].mask & isr_mask) {
-+			pr_warn("Qman ErrInt: %s\n", qman_hwerr_txts[i].txt);
-+			if (qman_hwerr_txts[i].mask & ecsr_val) {
-+				log_additional_error_info(isr_mask, ecsr_val);
-+				/* Re-arm error capture registers */
-+				qm_out(ECSR, ecsr_val);
-+			}
-+			if (qman_hwerr_txts[i].mask & QMAN_ERRS_TO_UNENABLE) {
-+				pr_devel("Qman un-enabling error 0x%x\n",
-+					qman_hwerr_txts[i].mask);
-+				ier_val &= ~qman_hwerr_txts[i].mask;
-+				qm_err_isr_enable_write(qm, ier_val);
-+			}
-+		}
-+	}
-+	qm_err_isr_status_clear(qm, isr_val);
-+	return IRQ_HANDLED;
-+}
-+
-+static int __bind_irq(void)
-+{
-+	int ret, err_irq;
-+
-+	err_irq = of_irq_to_resource(qm_node, 0, NULL);
-+	if (err_irq == 0) {
-+		pr_info("Can't get %s property '%s'\n", qm_node->full_name,
-+			"interrupts");
-+		return -ENODEV;
-+	}
-+	ret = request_irq(err_irq, qman_isr, IRQF_SHARED, "qman-err", qm_node);
-+	if (ret)  {
-+		pr_err("request_irq() failed %d for '%s'\n", ret,
-+			qm_node->full_name);
-+		return -ENODEV;
-+	}
-+	/* Write-to-clear any stale bits, (eg. starvation being asserted prior
-+	 * to resource allocation during driver init). */
-+	qm_err_isr_status_clear(qm, 0xffffffff);
-+	/* Enable Error Interrupts */
-+	qm_err_isr_enable_write(qm, 0xffffffff);
-+	return 0;
-+}
-+
-+int qman_init_ccsr(struct device_node *node)
-+{
-+	int ret;
-+	if (!qman_have_ccsr())
-+		return 0;
-+	if (node != qm_node)
-+		return -EINVAL;
-+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+	/* TEMP for LS1043 : should be done in uboot */
-+	qm_out(QCSP_BARE, 0x5);
-+	qm_out(QCSP_BAR, 0x0);
-+#endif
-+	/* FQD memory */
-+	qm_set_memory(qm, qm_memory_fqd, fqd_a, 1, 0, 0, fqd_sz);
-+	/* PFDR memory */
-+	qm_set_memory(qm, qm_memory_pfdr, pfdr_a, 1, 0, 0, pfdr_sz);
-+	qm_init_pfdr(qm, 8, pfdr_sz / 64 - 8);
-+	/* thresholds */
-+	qm_set_pfdr_threshold(qm, 512, 64);
-+	qm_set_sfdr_threshold(qm, 128);
-+	/* clear stale PEBI bit from interrupt status register */
-+	qm_err_isr_status_clear(qm, QM_EIRQ_PEBI);
-+	/* corenet initiator settings */
-+	qm_set_corenet_initiator(qm);
-+	/* HID settings */
-+	qm_set_hid(qm);
-+	/* Set scheduling weights to defaults */
-+	for (ret = qm_wq_first; ret <= qm_wq_last; ret++)
-+		qm_set_wq_scheduling(qm, ret, 0, 0, 0, 0, 0, 0, 0);
-+	/* We are not prepared to accept ERNs for hardware enqueues */
-+	qm_set_dc(qm, qm_dc_portal_fman0, 1, 0);
-+	qm_set_dc(qm, qm_dc_portal_fman1, 1, 0);
-+	/* Initialise Error Interrupt Handler */
-+	ret = __bind_irq();
-+	if (ret)
-+		return ret;
-+	return 0;
-+}
-+
-+#define LIO_CFG_LIODN_MASK 0x0fff0000
-+void qman_liodn_fixup(u16 channel)
-+{
-+	static int done;
-+	static u32 liodn_offset;
-+	u32 before, after;
-+	int idx = channel - QM_CHANNEL_SWPORTAL0;
-+
-+	if (!qman_have_ccsr())
-+		return;
-+	if ((qman_ip_rev & 0xFF00) >= QMAN_REV30)
-+		before = qm_in(REV3_QCSP_LIO_CFG(idx));
-+	else
-+		before = qm_in(QCSP_LIO_CFG(idx));
-+	if (!done) {
-+		liodn_offset = before & LIO_CFG_LIODN_MASK;
-+		done = 1;
-+		return;
-+	}
-+	after = (before & (~LIO_CFG_LIODN_MASK)) | liodn_offset;
-+	if ((qman_ip_rev & 0xFF00) >= QMAN_REV30)
-+		qm_out(REV3_QCSP_LIO_CFG(idx), after);
-+	else
-+		qm_out(QCSP_LIO_CFG(idx), after);
-+}
-+
-+#define IO_CFG_SDEST_MASK 0x00ff0000
-+int qman_set_sdest(u16 channel, unsigned int cpu_idx)
-+{
-+	int idx = channel - QM_CHANNEL_SWPORTAL0;
-+	u32 before, after;
-+
-+	if (!qman_have_ccsr())
-+		return -ENODEV;
-+	if ((qman_ip_rev & 0xFF00) == QMAN_REV31) {
-+		/* LS1043A - only one L2 cache */
-+		cpu_idx = 0;
-+	}
-+
-+	if ((qman_ip_rev & 0xFF00) >= QMAN_REV30) {
-+		before = qm_in(REV3_QCSP_IO_CFG(idx));
-+		/* Each pair of vcpu share the same SRQ(SDEST) */
-+		cpu_idx /= 2;
-+		after = (before & (~IO_CFG_SDEST_MASK)) | (cpu_idx << 16);
-+		qm_out(REV3_QCSP_IO_CFG(idx), after);
-+	} else {
-+		before = qm_in(QCSP_IO_CFG(idx));
-+		after = (before & (~IO_CFG_SDEST_MASK)) | (cpu_idx << 16);
-+		qm_out(QCSP_IO_CFG(idx), after);
-+	}
-+	return 0;
-+}
-+
-+#define MISC_CFG_WPM_MASK 0x00000002
-+int qm_set_wpm(int wpm)
-+{
-+	u32 before;
-+	u32 after;
-+
-+	if (!qman_have_ccsr())
-+		return -ENODEV;
-+
-+	before = qm_in(MISC_CFG);
-+	after = (before & (~MISC_CFG_WPM_MASK)) | (wpm << 1);
-+	qm_out(MISC_CFG, after);
-+	return 0;
-+}
-+
-+int qm_get_wpm(int *wpm)
-+{
-+	u32 before;
-+
-+	if (!qman_have_ccsr())
-+		return -ENODEV;
-+
-+	before = qm_in(MISC_CFG);
-+	*wpm = (before & MISC_CFG_WPM_MASK) >> 1;
-+	return 0;
-+}
-+
-+/* CEETM_CFG_PRES register has PRES field which is calculated by:
-+ *    PRES = (2^22 / credit update reference period) * QMan clock period
-+ *         = (2^22 * 10^9)/ CONFIG_QMAN_CEETM_UPDATE_PERIOD) / qman_clk
-+ */
-+
-+int qman_ceetm_set_prescaler(enum qm_dc_portal portal)
-+{
-+	u64 temp;
-+	u16 pres;
-+
-+	if (!qman_have_ccsr())
-+		return -ENODEV;
-+
-+	temp = 0x400000 * 100;
-+	do_div(temp, CONFIG_QMAN_CEETM_UPDATE_PERIOD);
-+	temp *= 10000000;
-+	do_div(temp, qman_clk);
-+	pres = (u16) temp;
-+	qm_out(CEETM_CFG_IDX, portal);
-+	qm_out(CEETM_CFG_PRES, pres);
-+	return 0;
-+}
-+
-+int qman_ceetm_get_prescaler(u16 *pres)
-+{
-+	if (!qman_have_ccsr())
-+		return -ENODEV;
-+	*pres = (u16)qm_in(CEETM_CFG_PRES);
-+	return 0;
-+}
-+
-+#define DCP_CFG_CEETME_MASK 0xFFFF0000
-+#define QM_SP_ENABLE_CEETM(n) (0x80000000 >> (n))
-+int qman_sp_enable_ceetm_mode(enum qm_dc_portal portal, u16 sub_portal)
-+{
-+	u32 dcp_cfg;
-+
-+	if (!qman_have_ccsr())
-+		return -ENODEV;
-+
-+	dcp_cfg = qm_in(DCP_CFG(portal));
-+	dcp_cfg |= QM_SP_ENABLE_CEETM(sub_portal);
-+	qm_out(DCP_CFG(portal), dcp_cfg);
-+	return 0;
-+}
-+
-+int qman_sp_disable_ceetm_mode(enum qm_dc_portal portal, u16 sub_portal)
-+{
-+	u32 dcp_cfg;
-+
-+	if (!qman_have_ccsr())
-+		return -ENODEV;
-+	dcp_cfg = qm_in(DCP_CFG(portal));
-+	dcp_cfg &= ~(QM_SP_ENABLE_CEETM(sub_portal));
-+	qm_out(DCP_CFG(portal), dcp_cfg);
-+	return 0;
-+}
-+
-+int qman_ceetm_get_xsfdr(enum qm_dc_portal portal, unsigned int *num)
-+{
-+	if (!qman_have_ccsr())
-+		return -ENODEV;
-+	*num = qm_in(CEETM_XSFDR_IN_USE);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_get_xsfdr);
-+
-+#ifdef CONFIG_SYSFS
-+
-+#define DRV_NAME	"fsl-qman"
-+#define DCP_MAX_ID	3
-+#define DCP_MIN_ID	0
-+
-+static ssize_t show_pfdr_fpc(struct device *dev,
-+	struct device_attribute *dev_attr, char *buf)
-+{
-+	return snprintf(buf, PAGE_SIZE, "%u\n", qm_in(PFDR_FPC));
-+};
-+
-+static ssize_t show_dlm_avg(struct device *dev,
-+	struct device_attribute *dev_attr, char *buf)
-+{
-+	u32 data;
-+	int i;
-+
-+	if (!sscanf(dev_attr->attr.name, "dcp%d_dlm_avg", &i))
-+		return -EINVAL;
-+	if (i < DCP_MIN_ID || i > DCP_MAX_ID)
-+		return -EINVAL;
-+	data = qm_in(DCP_DLM_AVG(i));
-+	return snprintf(buf, PAGE_SIZE, "%d.%08d\n", data>>8,
-+			(data & 0x000000ff)*390625);
-+};
-+
-+static ssize_t set_dlm_avg(struct device *dev,
-+	struct device_attribute *dev_attr, const char *buf, size_t count)
-+{
-+	unsigned long val;
-+	int i;
-+
-+	if (!sscanf(dev_attr->attr.name, "dcp%d_dlm_avg", &i))
-+		return -EINVAL;
-+	if (i < DCP_MIN_ID || i > DCP_MAX_ID)
-+		return -EINVAL;
-+	if (kstrtoul(buf, 0, &val)) {
-+		dev_dbg(dev, "invalid input %s\n", buf);
-+		return -EINVAL;
-+	}
-+	qm_out(DCP_DLM_AVG(i), val);
-+	return count;
-+};
-+
-+static ssize_t show_pfdr_cfg(struct device *dev,
-+	struct device_attribute *dev_attr, char *buf)
-+{
-+	return snprintf(buf, PAGE_SIZE, "%u\n", qm_in(PFDR_CFG));
-+};
-+
-+static ssize_t set_pfdr_cfg(struct device *dev,
-+	struct device_attribute *dev_attr, const char *buf, size_t count)
-+{
-+	unsigned long val;
-+
-+	if (kstrtoul(buf, 0, &val)) {
-+		dev_dbg(dev, "invalid input %s\n", buf);
-+		return -EINVAL;
-+	}
-+	qm_out(PFDR_CFG, val);
-+	return count;
-+};
-+
-+static ssize_t show_sfdr_in_use(struct device *dev,
-+	struct device_attribute *dev_attr, char *buf)
-+{
-+	return snprintf(buf, PAGE_SIZE, "%u\n", qm_in(SFDR_IN_USE));
-+};
-+
-+static ssize_t show_idle_stat(struct device *dev,
-+	struct device_attribute *dev_attr, char *buf)
-+{
-+	return snprintf(buf, PAGE_SIZE, "%u\n", qm_in(IDLE_STAT));
-+};
-+
-+static ssize_t show_ci_rlm_avg(struct device *dev,
-+	struct device_attribute *dev_attr, char *buf)
-+{
-+	u32 data = qm_in(CI_RLM_AVG);
-+	return snprintf(buf, PAGE_SIZE, "%d.%08d\n", data>>8,
-+			(data & 0x000000ff)*390625);
-+};
-+
-+static ssize_t set_ci_rlm_avg(struct device *dev,
-+	struct device_attribute *dev_attr, const char *buf, size_t count)
-+{
-+	unsigned long val;
-+
-+	if (kstrtoul(buf, 0, &val)) {
-+		dev_dbg(dev, "invalid input %s\n", buf);
-+		return -EINVAL;
-+	}
-+	qm_out(CI_RLM_AVG, val);
-+	return count;
-+};
-+
-+static ssize_t show_err_isr(struct device *dev,
-+	struct device_attribute *dev_attr, char *buf)
-+{
-+	return snprintf(buf, PAGE_SIZE, "0x%08x\n", qm_in(ERR_ISR));
-+};
-+
-+#define SBEC_MAX_ID	14
-+#define SBEC_MIN_ID	0
-+
-+static ssize_t show_sbec(struct device *dev,
-+	struct device_attribute *dev_attr, char *buf)
-+{
-+	int i;
-+
-+	if (!sscanf(dev_attr->attr.name, "sbec_%d", &i))
-+		return -EINVAL;
-+	if (i < SBEC_MIN_ID || i > SBEC_MAX_ID)
-+		return -EINVAL;
-+	return snprintf(buf, PAGE_SIZE, "%u\n", qm_in(SBEC(i)));
-+};
-+
-+static DEVICE_ATTR(pfdr_fpc, S_IRUSR, show_pfdr_fpc, NULL);
-+static DEVICE_ATTR(pfdr_cfg, S_IRUSR, show_pfdr_cfg, set_pfdr_cfg);
-+static DEVICE_ATTR(idle_stat, S_IRUSR, show_idle_stat, NULL);
-+static DEVICE_ATTR(ci_rlm_avg, (S_IRUSR|S_IWUSR),
-+		show_ci_rlm_avg, set_ci_rlm_avg);
-+static DEVICE_ATTR(err_isr, S_IRUSR, show_err_isr, NULL);
-+static DEVICE_ATTR(sfdr_in_use, S_IRUSR, show_sfdr_in_use, NULL);
-+
-+static DEVICE_ATTR(dcp0_dlm_avg, (S_IRUSR|S_IWUSR), show_dlm_avg, set_dlm_avg);
-+static DEVICE_ATTR(dcp1_dlm_avg, (S_IRUSR|S_IWUSR), show_dlm_avg, set_dlm_avg);
-+static DEVICE_ATTR(dcp2_dlm_avg, (S_IRUSR|S_IWUSR), show_dlm_avg, set_dlm_avg);
-+static DEVICE_ATTR(dcp3_dlm_avg, (S_IRUSR|S_IWUSR), show_dlm_avg, set_dlm_avg);
-+
-+static DEVICE_ATTR(sbec_0, S_IRUSR, show_sbec, NULL);
-+static DEVICE_ATTR(sbec_1, S_IRUSR, show_sbec, NULL);
-+static DEVICE_ATTR(sbec_2, S_IRUSR, show_sbec, NULL);
-+static DEVICE_ATTR(sbec_3, S_IRUSR, show_sbec, NULL);
-+static DEVICE_ATTR(sbec_4, S_IRUSR, show_sbec, NULL);
-+static DEVICE_ATTR(sbec_5, S_IRUSR, show_sbec, NULL);
-+static DEVICE_ATTR(sbec_6, S_IRUSR, show_sbec, NULL);
-+static DEVICE_ATTR(sbec_7, S_IRUSR, show_sbec, NULL);
-+static DEVICE_ATTR(sbec_8, S_IRUSR, show_sbec, NULL);
-+static DEVICE_ATTR(sbec_9, S_IRUSR, show_sbec, NULL);
-+static DEVICE_ATTR(sbec_10, S_IRUSR, show_sbec, NULL);
-+static DEVICE_ATTR(sbec_11, S_IRUSR, show_sbec, NULL);
-+static DEVICE_ATTR(sbec_12, S_IRUSR, show_sbec, NULL);
-+static DEVICE_ATTR(sbec_13, S_IRUSR, show_sbec, NULL);
-+static DEVICE_ATTR(sbec_14, S_IRUSR, show_sbec, NULL);
-+
-+static struct attribute *qman_dev_attributes[] = {
-+	&dev_attr_pfdr_fpc.attr,
-+	&dev_attr_pfdr_cfg.attr,
-+	&dev_attr_idle_stat.attr,
-+	&dev_attr_ci_rlm_avg.attr,
-+	&dev_attr_err_isr.attr,
-+	&dev_attr_dcp0_dlm_avg.attr,
-+	&dev_attr_dcp1_dlm_avg.attr,
-+	&dev_attr_dcp2_dlm_avg.attr,
-+	&dev_attr_dcp3_dlm_avg.attr,
-+	/* sfdr_in_use will be added if necessary */
-+	NULL
-+};
-+
-+static struct attribute *qman_dev_ecr_attributes[] = {
-+	&dev_attr_sbec_0.attr,
-+	&dev_attr_sbec_1.attr,
-+	&dev_attr_sbec_2.attr,
-+	&dev_attr_sbec_3.attr,
-+	&dev_attr_sbec_4.attr,
-+	&dev_attr_sbec_5.attr,
-+	&dev_attr_sbec_6.attr,
-+	&dev_attr_sbec_7.attr,
-+	&dev_attr_sbec_8.attr,
-+	&dev_attr_sbec_9.attr,
-+	&dev_attr_sbec_10.attr,
-+	&dev_attr_sbec_11.attr,
-+	&dev_attr_sbec_12.attr,
-+	&dev_attr_sbec_13.attr,
-+	&dev_attr_sbec_14.attr,
-+	NULL
-+};
-+
-+/* root level */
-+static const struct attribute_group qman_dev_attr_grp = {
-+	.name = NULL,
-+	.attrs = qman_dev_attributes
-+};
-+static const struct attribute_group qman_dev_ecr_grp = {
-+	.name = "error_capture",
-+	.attrs = qman_dev_ecr_attributes
-+};
-+
-+static int of_fsl_qman_remove(struct platform_device *ofdev)
-+{
-+	sysfs_remove_group(&ofdev->dev.kobj, &qman_dev_attr_grp);
-+	return 0;
-+};
-+
-+static int of_fsl_qman_probe(struct platform_device *ofdev)
-+{
-+	int ret;
-+
-+	ret = sysfs_create_group(&ofdev->dev.kobj, &qman_dev_attr_grp);
-+	if (ret)
-+		goto done;
-+	ret = sysfs_add_file_to_group(&ofdev->dev.kobj,
-+		&dev_attr_sfdr_in_use.attr, qman_dev_attr_grp.name);
-+	if (ret)
-+		goto del_group_0;
-+	ret = sysfs_create_group(&ofdev->dev.kobj, &qman_dev_ecr_grp);
-+	if (ret)
-+		goto del_group_0;
-+
-+	goto done;
-+
-+del_group_0:
-+	sysfs_remove_group(&ofdev->dev.kobj, &qman_dev_attr_grp);
-+done:
-+	if (ret)
-+		dev_err(&ofdev->dev,
-+				"Cannot create dev attributes ret=%d\n", ret);
-+	return ret;
-+};
-+
-+static struct of_device_id of_fsl_qman_ids[] = {
-+	{
-+		.compatible = "fsl,qman",
-+	},
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, of_fsl_qman_ids);
-+
-+#ifdef CONFIG_SUSPEND
-+
-+static u32 saved_isdr;
-+static int qman_pm_suspend_noirq(struct device *dev)
-+{
-+	uint32_t idle_state;
-+
-+	suspend_unused_qportal();
-+	/* save isdr, disable all, clear isr */
-+	saved_isdr = qm_err_isr_disable_read(qm);
-+	qm_err_isr_disable_write(qm, 0xffffffff);
-+	qm_err_isr_status_clear(qm, 0xffffffff);
-+	idle_state = qm_in(IDLE_STAT);
-+	if (!(idle_state & 0x1)) {
-+		pr_err("Qman not idle 0x%x aborting\n", idle_state);
-+		qm_err_isr_disable_write(qm, saved_isdr);
-+		resume_unused_qportal();
-+		return -EBUSY;
-+	}
-+#ifdef CONFIG_PM_DEBUG
-+	pr_info("Qman suspend code, IDLE_STAT = 0x%x\n", idle_state);
-+#endif
-+	return 0;
-+}
-+
-+static int qman_pm_resume_noirq(struct device *dev)
-+{
-+	/* restore isdr */
-+	qm_err_isr_disable_write(qm, saved_isdr);
-+	resume_unused_qportal();
-+	return 0;
-+}
-+#else
-+#define qman_pm_suspend_noirq	NULL
-+#define qman_pm_resume_noirq	NULL
-+#endif
-+
-+static const struct dev_pm_ops qman_pm_ops = {
-+	.suspend_noirq = qman_pm_suspend_noirq,
-+	.resume_noirq = qman_pm_resume_noirq,
-+};
-+
-+static struct platform_driver of_fsl_qman_driver = {
-+	.driver = {
-+		.owner = THIS_MODULE,
-+		.name = DRV_NAME,
-+		.of_match_table = of_fsl_qman_ids,
-+		.pm = &qman_pm_ops,
-+	},
-+	.probe = of_fsl_qman_probe,
-+	.remove      = of_fsl_qman_remove,
-+};
-+
-+static int qman_ctrl_init(void)
-+{
-+	return platform_driver_register(&of_fsl_qman_driver);
-+}
-+
-+static void qman_ctrl_exit(void)
-+{
-+	platform_driver_unregister(&of_fsl_qman_driver);
-+}
-+
-+module_init(qman_ctrl_init);
-+module_exit(qman_ctrl_exit);
-+
-+#endif /* CONFIG_SYSFS */
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/qman_debugfs.c
-@@ -0,0 +1,1594 @@
-+/* Copyright 2010-2011 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+#include "qman_private.h"
-+
-+#define MAX_FQID (0x00ffffff)
-+#define QM_FQD_BLOCK_SIZE     64
-+#define QM_FQD_AR             (0xC10)
-+
-+static u32 fqid_max;
-+static u64 qman_ccsr_start;
-+static u64 qman_ccsr_size;
-+
-+static const char * const state_txt[] = {
-+	"Out of Service",
-+	"Retired",
-+	"Tentatively Scheduled",
-+	"Truly Scheduled",
-+	"Parked",
-+	"Active, Active Held or Held Suspended",
-+	"Unknown State 6",
-+	"Unknown State 7",
-+	NULL,
-+};
-+
-+static const u8 fqd_states[] = {
-+	QM_MCR_NP_STATE_OOS, QM_MCR_NP_STATE_RETIRED, QM_MCR_NP_STATE_TEN_SCHED,
-+	QM_MCR_NP_STATE_TRU_SCHED, QM_MCR_NP_STATE_PARKED,
-+	QM_MCR_NP_STATE_ACTIVE};
-+
-+struct mask_to_text {
-+	u16 mask;
-+	const char *txt;
-+};
-+
-+struct mask_filter_s {
-+	u16 mask;
-+	u8 filter;
-+};
-+
-+static const struct mask_filter_s mask_filter[] = {
-+	{QM_FQCTRL_PREFERINCACHE, 0},
-+	{QM_FQCTRL_PREFERINCACHE, 1},
-+	{QM_FQCTRL_HOLDACTIVE, 0},
-+	{QM_FQCTRL_HOLDACTIVE, 1},
-+	{QM_FQCTRL_AVOIDBLOCK, 0},
-+	{QM_FQCTRL_AVOIDBLOCK, 1},
-+	{QM_FQCTRL_FORCESFDR, 0},
-+	{QM_FQCTRL_FORCESFDR, 1},
-+	{QM_FQCTRL_CPCSTASH, 0},
-+	{QM_FQCTRL_CPCSTASH, 1},
-+	{QM_FQCTRL_CTXASTASHING, 0},
-+	{QM_FQCTRL_CTXASTASHING, 1},
-+	{QM_FQCTRL_ORP, 0},
-+	{QM_FQCTRL_ORP, 1},
-+	{QM_FQCTRL_TDE, 0},
-+	{QM_FQCTRL_TDE, 1},
-+	{QM_FQCTRL_CGE, 0},
-+	{QM_FQCTRL_CGE, 1}
-+};
-+
-+static const struct mask_to_text fq_ctrl_text_list[] = {
-+	{
-+		.mask = QM_FQCTRL_PREFERINCACHE,
-+		.txt = "Prefer in cache",
-+	},
-+	{
-+		.mask = QM_FQCTRL_HOLDACTIVE,
-+		.txt =  "Hold active in portal",
-+	},
-+	{
-+		.mask = QM_FQCTRL_AVOIDBLOCK,
-+		.txt = "Avoid Blocking",
-+	},
-+	{
-+		.mask = QM_FQCTRL_FORCESFDR,
-+		.txt = "High-priority SFDRs",
-+	},
-+	{
-+		.mask = QM_FQCTRL_CPCSTASH,
-+		.txt = "CPC Stash Enable",
-+	},
-+	{
-+		.mask = QM_FQCTRL_CTXASTASHING,
-+		.txt =  "Context-A stashing",
-+	},
-+	{
-+		.mask = QM_FQCTRL_ORP,
-+		.txt =  "ORP Enable",
-+	},
-+	{
-+		.mask = QM_FQCTRL_TDE,
-+		.txt = "Tail-Drop Enable",
-+	},
-+	{
-+		.mask = QM_FQCTRL_CGE,
-+		.txt = "Congestion Group Enable",
-+	},
-+	{
-+		.mask = 0,
-+		.txt = NULL,
-+	}
-+};
-+
-+static const char *get_fqd_ctrl_text(u16 mask)
-+{
-+	int i = 0;
-+
-+	while (fq_ctrl_text_list[i].txt != NULL) {
-+		if (fq_ctrl_text_list[i].mask == mask)
-+			return fq_ctrl_text_list[i].txt;
-+		i++;
-+	}
-+	return NULL;
-+}
-+
-+static const struct mask_to_text stashing_text_list[] = {
-+	{
-+		.mask = QM_STASHING_EXCL_CTX,
-+		.txt = "FQ Ctx Stash"
-+	},
-+	{
-+		.mask = QM_STASHING_EXCL_DATA,
-+		.txt =  "Frame Data Stash",
-+	},
-+	{
-+		.mask = QM_STASHING_EXCL_ANNOTATION,
-+		.txt = "Frame Annotation Stash",
-+	},
-+	{
-+		.mask = 0,
-+		.txt = NULL,
-+	},
-+};
-+
-+static int user_input_convert(const char __user *user_buf, size_t count,
-+				unsigned long *val)
-+{
-+	char buf[12];
-+
-+	if (count > sizeof(buf) - 1)
-+		return -EINVAL;
-+	if (copy_from_user(buf, user_buf, count))
-+		return -EFAULT;
-+	buf[count] = '\0';
-+	if (kstrtoul(buf, 0, val))
-+		return -EINVAL;
-+	return 0;
-+}
-+
-+struct line_buffer_fq {
-+	u32 buf[8];
-+	u32 buf_cnt;
-+	int line_cnt;
-+};
-+
-+static void add_to_line_buffer(struct line_buffer_fq *line_buf, u32 fqid,
-+			struct seq_file *file)
-+{
-+	line_buf->buf[line_buf->buf_cnt] = fqid;
-+	line_buf->buf_cnt++;
-+	if (line_buf->buf_cnt == 8) {
-+		/* Buffer is full, flush it */
-+		if (line_buf->line_cnt != 0)
-+			seq_puts(file, ",\n");
-+		seq_printf(file, "0x%06x,0x%06x,0x%06x,0x%06x,0x%06x,"
-+			"0x%06x,0x%06x,0x%06x",
-+			line_buf->buf[0], line_buf->buf[1], line_buf->buf[2],
-+			line_buf->buf[3], line_buf->buf[4], line_buf->buf[5],
-+			line_buf->buf[6], line_buf->buf[7]);
-+		line_buf->buf_cnt = 0;
-+		line_buf->line_cnt++;
-+	}
-+}
-+
-+static void flush_line_buffer(struct line_buffer_fq *line_buf,
-+				struct seq_file *file)
-+{
-+	if (line_buf->buf_cnt) {
-+		int y = 0;
-+		if (line_buf->line_cnt != 0)
-+			seq_puts(file, ",\n");
-+		while (y != line_buf->buf_cnt) {
-+			if (y+1 == line_buf->buf_cnt)
-+				seq_printf(file, "0x%06x", line_buf->buf[y]);
-+			else
-+				seq_printf(file, "0x%06x,", line_buf->buf[y]);
-+			y++;
-+		}
-+		line_buf->line_cnt++;
-+	}
-+	if (line_buf->line_cnt)
-+		seq_putc(file, '\n');
-+}
-+
-+static struct dentry *dfs_root; /* debugfs root directory */
-+
-+/*******************************************************************************
-+ *  Query Frame Queue Non Programmable Fields
-+ ******************************************************************************/
-+struct query_fq_np_fields_data_s {
-+	u32 fqid;
-+};
-+static struct query_fq_np_fields_data_s query_fq_np_fields_data = {
-+	.fqid = 1,
-+};
-+
-+static int query_fq_np_fields_show(struct seq_file *file, void *offset)
-+{
-+	int ret;
-+	struct qm_mcr_queryfq_np np;
-+	struct qman_fq fq;
-+
-+	fq.fqid = query_fq_np_fields_data.fqid;
-+	ret = qman_query_fq_np(&fq, &np);
-+	if (ret)
-+		return ret;
-+	/* Print state */
-+	seq_printf(file, "Query FQ Non Programmable Fields Result fqid 0x%x\n",
-+			fq.fqid);
-+	seq_printf(file, " force eligible pending: %s\n",
-+		(np.state & QM_MCR_NP_STATE_FE) ? "yes" : "no");
-+	seq_printf(file, " retirement pending: %s\n",
-+		(np.state & QM_MCR_NP_STATE_R) ? "yes" : "no");
-+	seq_printf(file, " state: %s\n",
-+		state_txt[np.state & QM_MCR_NP_STATE_MASK]);
-+	seq_printf(file, " fq_link: 0x%x\n", np.fqd_link);
-+	seq_printf(file, " odp_seq: %u\n", np.odp_seq);
-+	seq_printf(file, " orp_nesn: %u\n", np.orp_nesn);
-+	seq_printf(file, " orp_ea_hseq: %u\n", np.orp_ea_hseq);
-+	seq_printf(file, " orp_ea_tseq: %u\n", np.orp_ea_tseq);
-+	seq_printf(file, " orp_ea_hptr: 0x%x\n", np.orp_ea_hptr);
-+	seq_printf(file, " orp_ea_tptr: 0x%x\n", np.orp_ea_tptr);
-+	seq_printf(file, " pfdr_hptr: 0x%x\n", np.pfdr_hptr);
-+	seq_printf(file, " pfdr_tptr: 0x%x\n", np.pfdr_tptr);
-+	seq_printf(file, " is: ics_surp contains a %s\n",
-+		(np.is) ? "deficit" : "surplus");
-+	seq_printf(file, " ics_surp: %u\n", np.ics_surp);
-+	seq_printf(file, " byte_cnt: %u\n", np.byte_cnt);
-+	seq_printf(file, " frm_cnt: %u\n", np.frm_cnt);
-+	seq_printf(file, " ra1_sfdr: 0x%x\n", np.ra1_sfdr);
-+	seq_printf(file, " ra2_sfdr: 0x%x\n", np.ra2_sfdr);
-+	seq_printf(file, " od1_sfdr: 0x%x\n", np.od1_sfdr);
-+	seq_printf(file, " od2_sfdr: 0x%x\n", np.od2_sfdr);
-+	seq_printf(file, " od3_sfdr: 0x%x\n", np.od3_sfdr);
-+	return 0;
-+}
-+
-+static int query_fq_np_fields_open(struct inode *inode,
-+					struct file *file)
-+{
-+	return single_open(file, query_fq_np_fields_show, NULL);
-+}
-+
-+static ssize_t query_fq_np_fields_write(struct file *f,
-+			const char __user *buf, size_t count, loff_t *off)
-+{
-+	int ret;
-+	unsigned long val;
-+
-+	ret = user_input_convert(buf, count, &val);
-+	if (ret)
-+		return ret;
-+	if (val > MAX_FQID)
-+		return -EINVAL;
-+	query_fq_np_fields_data.fqid = (u32)val;
-+	return count;
-+}
-+
-+static const struct file_operations query_fq_np_fields_fops = {
-+	.owner          = THIS_MODULE,
-+	.open		= query_fq_np_fields_open,
-+	.read           = seq_read,
-+	.write		= query_fq_np_fields_write,
-+	.release	= single_release,
-+};
-+
-+/*******************************************************************************
-+ *  Frame Queue Programmable Fields
-+ ******************************************************************************/
-+struct query_fq_fields_data_s {
-+	u32 fqid;
-+};
-+
-+static struct query_fq_fields_data_s query_fq_fields_data = {
-+	.fqid = 1,
-+};
-+
-+static int query_fq_fields_show(struct seq_file *file, void *offset)
-+{
-+	int ret;
-+	struct qm_fqd fqd;
-+	struct qman_fq fq;
-+	int i = 0;
-+
-+	memset(&fqd, 0, sizeof(struct qm_fqd));
-+	fq.fqid = query_fq_fields_data.fqid;
-+	ret = qman_query_fq(&fq, &fqd);
-+	if (ret)
-+		return ret;
-+	seq_printf(file, "Query FQ Programmable Fields Result fqid 0x%x\n",
-+			fq.fqid);
-+	seq_printf(file, " orprws: %u\n", fqd.orprws);
-+	seq_printf(file, " oa: %u\n", fqd.oa);
-+	seq_printf(file, " olws: %u\n", fqd.olws);
-+
-+	seq_printf(file, " cgid: %u\n", fqd.cgid);
-+
-+	if ((fqd.fq_ctrl & QM_FQCTRL_MASK) == 0)
-+		seq_puts(file, " fq_ctrl: None\n");
-+	else {
-+		i = 0;
-+		seq_puts(file, " fq_ctrl:\n");
-+		while (fq_ctrl_text_list[i].txt != NULL) {
-+			if ((fqd.fq_ctrl & QM_FQCTRL_MASK) &
-+					fq_ctrl_text_list[i].mask)
-+				seq_printf(file, "  %s\n",
-+					fq_ctrl_text_list[i].txt);
-+			i++;
-+		}
-+	}
-+	seq_printf(file, " dest_channel: %u\n", fqd.dest.channel);
-+	seq_printf(file, " dest_wq: %u\n", fqd.dest.wq);
-+	seq_printf(file, " ics_cred: %u\n", fqd.ics_cred);
-+	seq_printf(file, " td_mant: %u\n", fqd.td.mant);
-+	seq_printf(file, " td_exp: %u\n", fqd.td.exp);
-+
-+	seq_printf(file, " ctx_b: 0x%x\n", fqd.context_b);
-+
-+	seq_printf(file, " ctx_a: 0x%llx\n", qm_fqd_stashing_get64(&fqd));
-+	/* Any stashing configured */
-+	if ((fqd.context_a.stashing.exclusive & 0x7) == 0)
-+		seq_puts(file, " ctx_a_stash_exclusive: None\n");
-+	else {
-+		seq_puts(file, " ctx_a_stash_exclusive:\n");
-+		i = 0;
-+		while (stashing_text_list[i].txt != NULL) {
-+			if ((fqd.fq_ctrl & 0x7) & stashing_text_list[i].mask)
-+				seq_printf(file, "  %s\n",
-+					stashing_text_list[i].txt);
-+			i++;
-+		}
-+	}
-+	seq_printf(file, " ctx_a_stash_annotation_cl: %u\n",
-+			fqd.context_a.stashing.annotation_cl);
-+	seq_printf(file, " ctx_a_stash_data_cl: %u\n",
-+			fqd.context_a.stashing.data_cl);
-+	seq_printf(file, " ctx_a_stash_context_cl: %u\n",
-+			fqd.context_a.stashing.context_cl);
-+	return 0;
-+}
-+
-+static int query_fq_fields_open(struct inode *inode,
-+					struct file *file)
-+{
-+	return single_open(file, query_fq_fields_show, NULL);
-+}
-+
-+static ssize_t query_fq_fields_write(struct file *f,
-+			const char __user *buf, size_t count, loff_t *off)
-+{
-+	int ret;
-+	unsigned long val;
-+
-+	ret = user_input_convert(buf, count, &val);
-+	if (ret)
-+		return ret;
-+	if (val > MAX_FQID)
-+		return -EINVAL;
-+	query_fq_fields_data.fqid = (u32)val;
-+	return count;
-+}
-+
-+static const struct file_operations query_fq_fields_fops = {
-+	.owner          = THIS_MODULE,
-+	.open		= query_fq_fields_open,
-+	.read           = seq_read,
-+	.write		= query_fq_fields_write,
-+	.release	= single_release,
-+};
-+
-+/*******************************************************************************
-+ * Query WQ lengths
-+ ******************************************************************************/
-+struct query_wq_lengths_data_s {
-+	union {
-+		u16 channel_wq; /* ignores wq (3 lsbits) */
-+		struct {
-+			u16 id:13; /* qm_channel */
-+			u16 __reserved:3;
-+		} __packed channel;
-+	};
-+};
-+static struct query_wq_lengths_data_s query_wq_lengths_data;
-+static int query_wq_lengths_show(struct seq_file *file, void *offset)
-+{
-+	int ret;
-+	struct qm_mcr_querywq wq;
-+	int i;
-+
-+	memset(&wq, 0, sizeof(struct qm_mcr_querywq));
-+	wq.channel.id = query_wq_lengths_data.channel.id;
-+	ret = qman_query_wq(0, &wq);
-+	if (ret)
-+		return ret;
-+	seq_printf(file, "Query Result For Channel: 0x%x\n", wq.channel.id);
-+	for (i = 0; i < 8; i++)
-+		/* mask out upper 4 bits since they are not part of length */
-+		seq_printf(file, " wq%d_len : %u\n", i, wq.wq_len[i] & 0x0fff);
-+	return 0;
-+}
-+
-+static int query_wq_lengths_open(struct inode *inode,
-+					struct file *file)
-+{
-+	return single_open(file, query_wq_lengths_show, NULL);
-+}
-+
-+static ssize_t query_wq_lengths_write(struct file *f,
-+			const char __user *buf, size_t count, loff_t *off)
-+{
-+	int ret;
-+	unsigned long val;
-+
-+	ret = user_input_convert(buf, count, &val);
-+	if (ret)
-+		return ret;
-+	if (val > 0xfff8)
-+		return -EINVAL;
-+	query_wq_lengths_data.channel.id = (u16)val;
-+	return count;
-+}
-+
-+static const struct file_operations query_wq_lengths_fops = {
-+	.owner          = THIS_MODULE,
-+	.open		= query_wq_lengths_open,
-+	.read           = seq_read,
-+	.write		= query_wq_lengths_write,
-+	.release	= single_release,
-+};
-+
-+/*******************************************************************************
-+ *  Query CGR
-+ ******************************************************************************/
-+struct query_cgr_s {
-+	u8 cgid;
-+};
-+static struct query_cgr_s query_cgr_data;
-+
-+static int query_cgr_show(struct seq_file *file, void *offset)
-+{
-+	int ret;
-+	struct qm_mcr_querycgr cgrd;
-+	struct qman_cgr cgr;
-+	int i, j;
-+	u32 mask;
-+
-+	memset(&cgr, 0, sizeof(cgr));
-+	memset(&cgrd, 0, sizeof(cgrd));
-+	cgr.cgrid = query_cgr_data.cgid;
-+	ret = qman_query_cgr(&cgr, &cgrd);
-+	if (ret)
-+		return ret;
-+	seq_printf(file, "Query CGR id 0x%x\n", cgr.cgrid);
-+	seq_printf(file, " wr_parm_g MA: %u, Mn: %u, SA: %u, Sn: %u, Pn: %u\n",
-+		cgrd.cgr.wr_parm_g.MA, cgrd.cgr.wr_parm_g.Mn,
-+		cgrd.cgr.wr_parm_g.SA, cgrd.cgr.wr_parm_g.Sn,
-+		cgrd.cgr.wr_parm_g.Pn);
-+
-+	seq_printf(file, " wr_parm_y MA: %u, Mn: %u, SA: %u, Sn: %u, Pn: %u\n",
-+		cgrd.cgr.wr_parm_y.MA, cgrd.cgr.wr_parm_y.Mn,
-+		cgrd.cgr.wr_parm_y.SA, cgrd.cgr.wr_parm_y.Sn,
-+		cgrd.cgr.wr_parm_y.Pn);
-+
-+	seq_printf(file, " wr_parm_r MA: %u, Mn: %u, SA: %u, Sn: %u, Pn: %u\n",
-+		cgrd.cgr.wr_parm_r.MA, cgrd.cgr.wr_parm_r.Mn,
-+		cgrd.cgr.wr_parm_r.SA, cgrd.cgr.wr_parm_r.Sn,
-+		cgrd.cgr.wr_parm_r.Pn);
-+
-+	seq_printf(file, " wr_en_g: %u, wr_en_y: %u, we_en_r: %u\n",
-+		cgrd.cgr.wr_en_g, cgrd.cgr.wr_en_y, cgrd.cgr.wr_en_r);
-+
-+	seq_printf(file, " cscn_en: %u\n", cgrd.cgr.cscn_en);
-+	if ((qman_ip_rev & 0xFF00) >= QMAN_REV30) {
-+		seq_puts(file, " cscn_targ_dcp:\n");
-+		mask = 0x80000000;
-+		for (i = 0; i < 32; i++) {
-+			if (cgrd.cgr.cscn_targ & mask)
-+				seq_printf(file, "  send CSCN to dcp %u\n",
-+								(31 - i));
-+			mask >>= 1;
-+		}
-+
-+		seq_puts(file, " cscn_targ_swp:\n");
-+		for (i = 0; i < 4; i++) {
-+			mask = 0x80000000;
-+			for (j = 0; j < 32; j++) {
-+				if (cgrd.cscn_targ_swp[i] & mask)
-+					seq_printf(file, "  send CSCN to swp"
-+						" %u\n", (127 - (i * 32) - j));
-+				mask >>= 1;
-+			}
-+		}
-+	} else {
-+		seq_printf(file, " cscn_targ: %u\n", cgrd.cgr.cscn_targ);
-+	}
-+	seq_printf(file, " cstd_en: %u\n", cgrd.cgr.cstd_en);
-+	seq_printf(file, " cs: %u\n", cgrd.cgr.cs);
-+
-+	seq_printf(file, " cs_thresh_TA: %u, cs_thresh_Tn: %u\n",
-+		cgrd.cgr.cs_thres.TA, cgrd.cgr.cs_thres.Tn);
-+
-+	seq_printf(file, " mode: %s\n",
-+		(cgrd.cgr.mode & QMAN_CGR_MODE_FRAME) ?
-+		"frame count" : "byte count");
-+	seq_printf(file, " i_bcnt: %llu\n", qm_mcr_querycgr_i_get64(&cgrd));
-+	seq_printf(file, " a_bcnt: %llu\n", qm_mcr_querycgr_a_get64(&cgrd));
-+
-+	return 0;
-+}
-+
-+static int query_cgr_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, query_cgr_show, NULL);
-+}
-+
-+static ssize_t query_cgr_write(struct file *f, const char __user *buf,
-+				size_t count, loff_t *off)
-+{
-+	int ret;
-+	unsigned long val;
-+
-+	ret = user_input_convert(buf, count, &val);
-+	if (ret)
-+		return ret;
-+	if (val > 0xff)
-+		return -EINVAL;
-+	query_cgr_data.cgid = (u8)val;
-+	return count;
-+}
-+
-+static const struct file_operations query_cgr_fops = {
-+	.owner          = THIS_MODULE,
-+	.open		= query_cgr_open,
-+	.read           = seq_read,
-+	.write		= query_cgr_write,
-+	.release	= single_release,
-+};
-+
-+/*******************************************************************************
-+ *  Test Write CGR
-+ ******************************************************************************/
-+struct test_write_cgr_s {
-+	u64 i_bcnt;
-+	u8 cgid;
-+};
-+static struct test_write_cgr_s test_write_cgr_data;
-+
-+static int testwrite_cgr_show(struct seq_file *file, void *offset)
-+{
-+	int ret;
-+	struct qm_mcr_cgrtestwrite result;
-+	struct qman_cgr cgr;
-+	u64 i_bcnt;
-+
-+	memset(&cgr, 0, sizeof(struct qman_cgr));
-+	memset(&result, 0, sizeof(struct qm_mcr_cgrtestwrite));
-+	cgr.cgrid = test_write_cgr_data.cgid;
-+	i_bcnt = test_write_cgr_data.i_bcnt;
-+	ret = qman_testwrite_cgr(&cgr, i_bcnt, &result);
-+	if (ret)
-+		return ret;
-+	seq_printf(file, "CGR Test Write CGR id 0x%x\n", cgr.cgrid);
-+	seq_printf(file, " wr_parm_g MA: %u, Mn: %u, SA: %u, Sn: %u, Pn: %u\n",
-+		result.cgr.wr_parm_g.MA, result.cgr.wr_parm_g.Mn,
-+		result.cgr.wr_parm_g.SA, result.cgr.wr_parm_g.Sn,
-+		result.cgr.wr_parm_g.Pn);
-+	seq_printf(file, " wr_parm_y MA: %u, Mn: %u, SA: %u, Sn: %u, Pn: %u\n",
-+		result.cgr.wr_parm_y.MA, result.cgr.wr_parm_y.Mn,
-+		result.cgr.wr_parm_y.SA, result.cgr.wr_parm_y.Sn,
-+		result.cgr.wr_parm_y.Pn);
-+	seq_printf(file, " wr_parm_r MA: %u, Mn: %u, SA: %u, Sn: %u, Pn: %u\n",
-+		result.cgr.wr_parm_r.MA, result.cgr.wr_parm_r.Mn,
-+		result.cgr.wr_parm_r.SA, result.cgr.wr_parm_r.Sn,
-+		result.cgr.wr_parm_r.Pn);
-+	seq_printf(file, " wr_en_g: %u, wr_en_y: %u, we_en_r: %u\n",
-+		result.cgr.wr_en_g, result.cgr.wr_en_y, result.cgr.wr_en_r);
-+	seq_printf(file, " cscn_en: %u\n", result.cgr.cscn_en);
-+	seq_printf(file, " cscn_targ: %u\n", result.cgr.cscn_targ);
-+	seq_printf(file, " cstd_en: %u\n", result.cgr.cstd_en);
-+	seq_printf(file, " cs: %u\n", result.cgr.cs);
-+	seq_printf(file, " cs_thresh_TA: %u, cs_thresh_Tn: %u\n",
-+		result.cgr.cs_thres.TA, result.cgr.cs_thres.Tn);
-+
-+	/* Add Mode for Si 2 */
-+	seq_printf(file, " mode: %s\n",
-+		(result.cgr.mode & QMAN_CGR_MODE_FRAME) ?
-+		"frame count" : "byte count");
-+
-+	seq_printf(file, " i_bcnt: %llu\n",
-+		qm_mcr_cgrtestwrite_i_get64(&result));
-+	seq_printf(file, " a_bcnt: %llu\n",
-+		qm_mcr_cgrtestwrite_a_get64(&result));
-+	seq_printf(file, " wr_prob_g: %u\n", result.wr_prob_g);
-+	seq_printf(file, " wr_prob_y: %u\n", result.wr_prob_y);
-+	seq_printf(file, " wr_prob_r: %u\n", result.wr_prob_r);
-+	return 0;
-+}
-+
-+static int testwrite_cgr_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, testwrite_cgr_show, NULL);
-+}
-+
-+static const struct file_operations testwrite_cgr_fops = {
-+	.owner          = THIS_MODULE,
-+	.open		= testwrite_cgr_open,
-+	.read           = seq_read,
-+	.release	= single_release,
-+};
-+
-+
-+static int testwrite_cgr_ibcnt_show(struct seq_file *file, void *offset)
-+{
-+	seq_printf(file, "i_bcnt: %llu\n", test_write_cgr_data.i_bcnt);
-+	return 0;
-+}
-+static int testwrite_cgr_ibcnt_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, testwrite_cgr_ibcnt_show, NULL);
-+}
-+
-+static ssize_t testwrite_cgr_ibcnt_write(struct file *f, const char __user *buf,
-+				size_t count, loff_t *off)
-+{
-+	int ret;
-+	unsigned long val;
-+
-+	ret = user_input_convert(buf, count, &val);
-+	if (ret)
-+		return ret;
-+	test_write_cgr_data.i_bcnt = val;
-+	return count;
-+}
-+
-+static const struct file_operations teswrite_cgr_ibcnt_fops = {
-+	.owner          = THIS_MODULE,
-+	.open		= testwrite_cgr_ibcnt_open,
-+	.read           = seq_read,
-+	.write		= testwrite_cgr_ibcnt_write,
-+	.release	= single_release,
-+};
-+
-+static int testwrite_cgr_cgrid_show(struct seq_file *file, void *offset)
-+{
-+	seq_printf(file, "cgrid: %u\n", (u32)test_write_cgr_data.cgid);
-+	return 0;
-+}
-+static int testwrite_cgr_cgrid_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, testwrite_cgr_cgrid_show, NULL);
-+}
-+
-+static ssize_t testwrite_cgr_cgrid_write(struct file *f, const char __user *buf,
-+				size_t count, loff_t *off)
-+{
-+	int ret;
-+	unsigned long val;
-+
-+	ret = user_input_convert(buf, count, &val);
-+	if (ret)
-+		return ret;
-+	if (val > 0xff)
-+		return -EINVAL;
-+	test_write_cgr_data.cgid = (u8)val;
-+	return count;
-+}
-+
-+static const struct file_operations teswrite_cgr_cgrid_fops = {
-+	.owner          = THIS_MODULE,
-+	.open		= testwrite_cgr_cgrid_open,
-+	.read           = seq_read,
-+	.write		= testwrite_cgr_cgrid_write,
-+	.release	= single_release,
-+};
-+
-+/*******************************************************************************
-+ *  Query Congestion State
-+ ******************************************************************************/
-+static int query_congestion_show(struct seq_file *file, void *offset)
-+{
-+	int ret;
-+	struct qm_mcr_querycongestion cs;
-+	int i, j, in_cong = 0;
-+	u32 mask;
-+
-+	memset(&cs, 0, sizeof(struct qm_mcr_querycongestion));
-+	ret = qman_query_congestion(&cs);
-+	if (ret)
-+		return ret;
-+	seq_puts(file, "Query Congestion Result\n");
-+	for (i = 0; i < 8; i++) {
-+		mask = 0x80000000;
-+		for (j = 0; j < 32; j++) {
-+			if (cs.state.__state[i] & mask) {
-+				in_cong = 1;
-+				seq_printf(file, " cg %u: %s\n", (i*32)+j,
-+					"in congestion");
-+			}
-+			mask >>= 1;
-+		}
-+	}
-+	if (!in_cong)
-+		seq_puts(file, " All congestion groups not congested.\n");
-+	return 0;
-+}
-+
-+static int query_congestion_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, query_congestion_show, NULL);
-+}
-+
-+static const struct file_operations query_congestion_fops = {
-+	.owner          = THIS_MODULE,
-+	.open		= query_congestion_open,
-+	.read           = seq_read,
-+	.release	= single_release,
-+};
-+
-+/*******************************************************************************
-+ *  Query CCGR
-+ ******************************************************************************/
-+struct query_ccgr_s {
-+	u32 ccgid;
-+};
-+static struct query_ccgr_s query_ccgr_data;
-+
-+static int query_ccgr_show(struct seq_file *file, void *offset)
-+{
-+	int ret;
-+	struct qm_mcr_ceetm_ccgr_query ccgr_query;
-+	struct qm_mcc_ceetm_ccgr_query query_opts;
-+	int i, j;
-+	u32 mask;
-+
-+	memset(&ccgr_query, 0, sizeof(struct qm_mcr_ceetm_ccgr_query));
-+	memset(&query_opts, 0, sizeof(struct qm_mcc_ceetm_ccgr_query));
-+
-+	if ((qman_ip_rev & 0xFF00) < QMAN_REV30)
-+		return -EINVAL;
-+
-+	seq_printf(file, "Query CCGID %x\n", query_ccgr_data.ccgid);
-+	query_opts.dcpid = ((query_ccgr_data.ccgid & 0xFF000000) >> 24);
-+	query_opts.ccgrid = query_ccgr_data.ccgid & 0x000001FF;
-+	ret = qman_ceetm_query_ccgr(&query_opts, &ccgr_query);
-+	if (ret)
-+		return ret;
-+	seq_printf(file, "Query CCGR id %x in DCP %d\n", query_opts.ccgrid,
-+						query_opts.dcpid);
-+	seq_printf(file, " wr_parm_g MA: %u, Mn: %u, SA: %u, Sn: %u, Pn: %u\n",
-+		ccgr_query.cm_query.wr_parm_g.MA,
-+		ccgr_query.cm_query.wr_parm_g.Mn,
-+		ccgr_query.cm_query.wr_parm_g.SA,
-+		ccgr_query.cm_query.wr_parm_g.Sn,
-+		ccgr_query.cm_query.wr_parm_g.Pn);
-+
-+	seq_printf(file, " wr_parm_y MA: %u, Mn: %u, SA: %u, Sn: %u, Pn: %u\n",
-+		ccgr_query.cm_query.wr_parm_y.MA,
-+		ccgr_query.cm_query.wr_parm_y.Mn,
-+		ccgr_query.cm_query.wr_parm_y.SA,
-+		ccgr_query.cm_query.wr_parm_y.Sn,
-+		ccgr_query.cm_query.wr_parm_y.Pn);
-+
-+	seq_printf(file, " wr_parm_r MA: %u, Mn: %u, SA: %u, Sn: %u, Pn: %u\n",
-+		ccgr_query.cm_query.wr_parm_r.MA,
-+		ccgr_query.cm_query.wr_parm_r.Mn,
-+		ccgr_query.cm_query.wr_parm_r.SA,
-+		ccgr_query.cm_query.wr_parm_r.Sn,
-+		ccgr_query.cm_query.wr_parm_r.Pn);
-+
-+	seq_printf(file, " wr_en_g: %u, wr_en_y: %u, we_en_r: %u\n",
-+		ccgr_query.cm_query.ctl_wr_en_g,
-+		ccgr_query.cm_query.ctl_wr_en_y,
-+		ccgr_query.cm_query.ctl_wr_en_r);
-+
-+	seq_printf(file, " cscn_en: %u\n", ccgr_query.cm_query.ctl_cscn_en);
-+	seq_puts(file, " cscn_targ_dcp:\n");
-+	mask = 0x80000000;
-+	for (i = 0; i < 32; i++) {
-+		if (ccgr_query.cm_query.cscn_targ_dcp & mask)
-+			seq_printf(file, "  send CSCN to dcp %u\n", (31 - i));
-+		mask >>= 1;
-+	}
-+
-+	seq_puts(file, " cscn_targ_swp:\n");
-+	for (i = 0; i < 4; i++) {
-+		mask = 0x80000000;
-+		for (j = 0; j < 32; j++) {
-+			if (ccgr_query.cm_query.cscn_targ_swp[i] & mask)
-+				seq_printf(file, "  send CSCN to swp"
-+					"%u\n", (127 - (i * 32) - j));
-+			mask >>= 1;
-+		}
-+	}
-+
-+	seq_printf(file, " td_en: %u\n", ccgr_query.cm_query.ctl_td_en);
-+
-+	seq_printf(file, " cs_thresh_in_TA: %u, cs_thresh_in_Tn: %u\n",
-+			ccgr_query.cm_query.cs_thres.TA,
-+			ccgr_query.cm_query.cs_thres.Tn);
-+
-+	seq_printf(file, " cs_thresh_out_TA: %u, cs_thresh_out_Tn: %u\n",
-+			ccgr_query.cm_query.cs_thres_x.TA,
-+			ccgr_query.cm_query.cs_thres_x.Tn);
-+
-+	seq_printf(file, " td_thresh_TA: %u, td_thresh_Tn: %u\n",
-+			ccgr_query.cm_query.td_thres.TA,
-+			ccgr_query.cm_query.td_thres.Tn);
-+
-+	seq_printf(file, " mode: %s\n",
-+			(ccgr_query.cm_query.ctl_mode &
-+			QMAN_CGR_MODE_FRAME) ?
-+			"frame count" : "byte count");
-+	seq_printf(file, " i_cnt: %llu\n", (u64)ccgr_query.cm_query.i_cnt);
-+	seq_printf(file, " a_cnt: %llu\n", (u64)ccgr_query.cm_query.a_cnt);
-+
-+	return 0;
-+}
-+
-+static int query_ccgr_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, query_ccgr_show, NULL);
-+}
-+
-+static ssize_t query_ccgr_write(struct file *f, const char __user *buf,
-+				size_t count, loff_t *off)
-+{
-+	int ret;
-+	unsigned long val;
-+
-+	ret = user_input_convert(buf, count, &val);
-+	if (ret)
-+		return ret;
-+	query_ccgr_data.ccgid = val;
-+	return count;
-+}
-+
-+static const struct file_operations query_ccgr_fops = {
-+	.owner          = THIS_MODULE,
-+	.open		= query_ccgr_open,
-+	.read           = seq_read,
-+	.write		= query_ccgr_write,
-+	.release	= single_release,
-+};
-+/*******************************************************************************
-+ *  QMan register
-+ ******************************************************************************/
-+struct qman_register_s {
-+	u32 val;
-+};
-+static struct qman_register_s qman_register_data;
-+
-+static void init_ccsrmempeek(void)
-+{
-+	struct device_node *dn;
-+	const u32 *regaddr_p;
-+
-+	dn = of_find_compatible_node(NULL, NULL, "fsl,qman");
-+	if (!dn) {
-+		pr_info("No fsl,qman node\n");
-+		return;
-+	}
-+	regaddr_p = of_get_address(dn, 0, &qman_ccsr_size, NULL);
-+	if (!regaddr_p) {
-+		of_node_put(dn);
-+		return;
-+	}
-+	qman_ccsr_start = of_translate_address(dn, regaddr_p);
-+	of_node_put(dn);
-+}
-+/* This function provides access to QMan ccsr memory map */
-+static int qman_ccsrmempeek(u32 *val, u32 offset)
-+{
-+	void __iomem *addr;
-+	u64 phys_addr;
-+
-+	if (!qman_ccsr_start)
-+		return -EINVAL;
-+
-+	if (offset > (qman_ccsr_size - sizeof(u32)))
-+		return -EINVAL;
-+
-+	phys_addr = qman_ccsr_start + offset;
-+	addr = ioremap(phys_addr, sizeof(u32));
-+	if (!addr) {
-+		pr_err("ccsrmempeek, ioremap failed\n");
-+		return -EINVAL;
-+	}
-+	*val = in_be32(addr);
-+	iounmap(addr);
-+	return 0;
-+}
-+
-+static int qman_ccsrmempeek_show(struct seq_file *file, void *offset)
-+{
-+	u32 b;
-+
-+	qman_ccsrmempeek(&b, qman_register_data.val);
-+	seq_printf(file, "QMan register offset = 0x%x\n",
-+		   qman_register_data.val);
-+	seq_printf(file, "value = 0x%08x\n", b);
-+
-+	return 0;
-+}
-+
-+static int qman_ccsrmempeek_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, qman_ccsrmempeek_show, NULL);
-+}
-+
-+static ssize_t qman_ccsrmempeek_write(struct file *f, const char __user *buf,
-+				size_t count, loff_t *off)
-+{
-+	int ret;
-+	unsigned long val;
-+
-+	ret = user_input_convert(buf, count, &val);
-+	if (ret)
-+		return ret;
-+	/* multiple of 4 */
-+	if (val > (qman_ccsr_size - sizeof(u32))) {
-+		pr_info("Input 0x%lx > 0x%llx\n",
-+			val, (qman_ccsr_size - sizeof(u32)));
-+		return -EINVAL;
-+	}
-+	if (val & 0x3) {
-+		pr_info("Input 0x%lx not multiple of 4\n", val);
-+		return -EINVAL;
-+	}
-+	qman_register_data.val = val;
-+	return count;
-+}
-+
-+static const struct file_operations qman_ccsrmempeek_fops = {
-+	.owner          = THIS_MODULE,
-+	.open		= qman_ccsrmempeek_open,
-+	.read           = seq_read,
-+	.write		= qman_ccsrmempeek_write,
-+};
-+
-+/*******************************************************************************
-+ *  QMan state
-+ ******************************************************************************/
-+static int qman_fqd_state_show(struct seq_file *file, void *offset)
-+{
-+	struct qm_mcr_queryfq_np np;
-+	struct qman_fq fq;
-+	struct line_buffer_fq line_buf;
-+	int ret, i;
-+	u8 *state = file->private;
-+	u32 qm_fq_state_cnt[ARRAY_SIZE(fqd_states)];
-+
-+	memset(qm_fq_state_cnt, 0, sizeof(qm_fq_state_cnt));
-+	memset(&line_buf, 0, sizeof(line_buf));
-+
-+	seq_printf(file, "List of fq ids in state: %s\n", state_txt[*state]);
-+
-+	for (i = 1; i < fqid_max; i++) {
-+		fq.fqid = i;
-+		ret = qman_query_fq_np(&fq, &np);
-+		if (ret)
-+			return ret;
-+		if (*state == (np.state & QM_MCR_NP_STATE_MASK))
-+			add_to_line_buffer(&line_buf, fq.fqid, file);
-+		/* Keep a summary count of all states */
-+		if ((np.state & QM_MCR_NP_STATE_MASK) < ARRAY_SIZE(fqd_states))
-+			qm_fq_state_cnt[(np.state & QM_MCR_NP_STATE_MASK)]++;
-+	}
-+	flush_line_buffer(&line_buf, file);
-+
-+	for (i = 0; i < ARRAY_SIZE(fqd_states); i++) {
-+		seq_printf(file, "%s count = %u\n", state_txt[i],
-+			   qm_fq_state_cnt[i]);
-+	}
-+	return 0;
-+}
-+
-+static int qman_fqd_state_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, qman_fqd_state_show, inode->i_private);
-+}
-+
-+static const struct file_operations qman_fqd_state_fops =  {
-+	.owner          = THIS_MODULE,
-+	.open		= qman_fqd_state_open,
-+	.read           = seq_read,
-+};
-+
-+static int qman_fqd_ctrl_show(struct seq_file *file, void *offset)
-+{
-+	struct qm_fqd fqd;
-+	struct qman_fq fq;
-+	u32 fq_en_cnt = 0, fq_di_cnt = 0;
-+	int ret, i;
-+	struct mask_filter_s *data = file->private;
-+	const char *ctrl_txt = get_fqd_ctrl_text(data->mask);
-+	struct line_buffer_fq line_buf;
-+
-+	memset(&line_buf, 0, sizeof(line_buf));
-+	seq_printf(file, "List of fq ids with: %s :%s\n",
-+		ctrl_txt, (data->filter) ? "enabled" : "disabled");
-+	for (i = 1; i < fqid_max; i++) {
-+		fq.fqid = i;
-+		memset(&fqd, 0, sizeof(struct qm_fqd));
-+		ret = qman_query_fq(&fq, &fqd);
-+		if (ret)
-+			return ret;
-+		if (data->filter) {
-+			if (fqd.fq_ctrl & data->mask)
-+				add_to_line_buffer(&line_buf, fq.fqid, file);
-+		} else {
-+			if (!(fqd.fq_ctrl & data->mask))
-+				add_to_line_buffer(&line_buf, fq.fqid, file);
-+		}
-+		if (fqd.fq_ctrl & data->mask)
-+			fq_en_cnt++;
-+		else
-+			fq_di_cnt++;
-+	}
-+	flush_line_buffer(&line_buf, file);
-+
-+	seq_printf(file, "Total FQD with: %s :  enabled = %u\n",
-+		   ctrl_txt, fq_en_cnt);
-+	seq_printf(file, "Total FQD with: %s : disabled = %u\n",
-+		   ctrl_txt, fq_di_cnt);
-+	return 0;
-+}
-+
-+/*******************************************************************************
-+ *  QMan ctrl CGE, TDE, ORP, CTX, CPC, SFDR, BLOCK, HOLD, CACHE
-+ ******************************************************************************/
-+static int qman_fqd_ctrl_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, qman_fqd_ctrl_show, inode->i_private);
-+}
-+
-+static const struct file_operations qman_fqd_ctrl_fops =  {
-+	.owner          = THIS_MODULE,
-+	.open		= qman_fqd_ctrl_open,
-+	.read           = seq_read,
-+};
-+
-+/*******************************************************************************
-+ *  QMan ctrl summary
-+ ******************************************************************************/
-+/*******************************************************************************
-+ *  QMan summary state
-+ ******************************************************************************/
-+static int qman_fqd_non_prog_summary_show(struct seq_file *file, void *offset)
-+{
-+	struct qm_mcr_queryfq_np np;
-+	struct qman_fq fq;
-+	int ret, i;
-+	u32 qm_fq_state_cnt[ARRAY_SIZE(fqd_states)];
-+
-+	memset(qm_fq_state_cnt, 0, sizeof(qm_fq_state_cnt));
-+
-+	for (i = 1; i < fqid_max; i++) {
-+		fq.fqid = i;
-+		ret = qman_query_fq_np(&fq, &np);
-+		if (ret)
-+			return ret;
-+		/* Keep a summary count of all states */
-+		if ((np.state & QM_MCR_NP_STATE_MASK) < ARRAY_SIZE(fqd_states))
-+			qm_fq_state_cnt[(np.state & QM_MCR_NP_STATE_MASK)]++;
-+	}
-+
-+	for (i = 0; i < ARRAY_SIZE(fqd_states); i++) {
-+		seq_printf(file, "%s count = %u\n", state_txt[i],
-+			   qm_fq_state_cnt[i]);
-+	}
-+	return 0;
-+}
-+
-+static int qman_fqd_prog_summary_show(struct seq_file *file, void *offset)
-+{
-+	struct qm_fqd fqd;
-+	struct qman_fq fq;
-+	int ret, i , j;
-+	u32 qm_prog_cnt[ARRAY_SIZE(mask_filter)/2];
-+
-+	memset(qm_prog_cnt, 0, sizeof(qm_prog_cnt));
-+
-+	for (i = 1; i < fqid_max; i++) {
-+		memset(&fqd, 0, sizeof(struct qm_fqd));
-+		fq.fqid = i;
-+		ret = qman_query_fq(&fq, &fqd);
-+		if (ret)
-+			return ret;
-+		/* Keep a summary count of all states */
-+		for (j = 0; j < ARRAY_SIZE(mask_filter); j += 2)
-+			if ((fqd.fq_ctrl & QM_FQCTRL_MASK) &
-+					mask_filter[j].mask)
-+				qm_prog_cnt[j/2]++;
-+	}
-+	for (i = 0; i < ARRAY_SIZE(mask_filter) / 2; i++) {
-+		seq_printf(file, "%s count = %u\n",
-+			get_fqd_ctrl_text(mask_filter[i*2].mask),
-+			   qm_prog_cnt[i]);
-+	}
-+	return 0;
-+}
-+
-+static int qman_fqd_summary_show(struct seq_file *file, void *offset)
-+{
-+	int ret;
-+
-+	/* Display summary of non programmable fields */
-+	ret = qman_fqd_non_prog_summary_show(file, offset);
-+	if (ret)
-+		return ret;
-+	seq_puts(file, "-----------------------------------------\n");
-+	/* Display programmable fields */
-+	ret = qman_fqd_prog_summary_show(file, offset);
-+	if (ret)
-+		return ret;
-+	return 0;
-+}
-+
-+static int qman_fqd_summary_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, qman_fqd_summary_show, NULL);
-+}
-+
-+static const struct file_operations qman_fqd_summary_fops =  {
-+	.owner          = THIS_MODULE,
-+	.open		= qman_fqd_summary_open,
-+	.read           = seq_read,
-+};
-+
-+/*******************************************************************************
-+ *  QMan destination work queue
-+ ******************************************************************************/
-+struct qman_dest_wq_s {
-+	u16 wq_id;
-+};
-+static struct qman_dest_wq_s qman_dest_wq_data = {
-+	.wq_id = 0,
-+};
-+
-+static int qman_fqd_dest_wq_show(struct seq_file *file, void *offset)
-+{
-+	struct qm_fqd fqd;
-+	struct qman_fq fq;
-+	int ret, i;
-+	u16 *wq, wq_id = qman_dest_wq_data.wq_id;
-+	struct line_buffer_fq line_buf;
-+
-+	memset(&line_buf, 0, sizeof(line_buf));
-+	/* use vmalloc : need to allocate large memory region and don't
-+	 * require the memory to be physically contiguous. */
-+	wq = vzalloc(sizeof(u16) * (0xFFFF+1));
-+	if (!wq)
-+		return -ENOMEM;
-+
-+	seq_printf(file, "List of fq ids with destination work queue id"
-+			" = 0x%x\n", wq_id);
-+
-+	for (i = 1; i < fqid_max; i++) {
-+		fq.fqid = i;
-+		memset(&fqd, 0, sizeof(struct qm_fqd));
-+		ret = qman_query_fq(&fq, &fqd);
-+		if (ret) {
-+			vfree(wq);
-+			return ret;
-+		}
-+		if (wq_id == fqd.dest_wq)
-+			add_to_line_buffer(&line_buf, fq.fqid, file);
-+		wq[fqd.dest_wq]++;
-+	}
-+	flush_line_buffer(&line_buf, file);
-+
-+	seq_puts(file, "Summary of all FQD destination work queue values\n");
-+	for (i = 0; i < 0xFFFF; i++) {
-+		if (wq[i])
-+			seq_printf(file, "Channel: 0x%x WQ: 0x%x WQ_ID: 0x%x, "
-+				"count = %u\n", i >> 3, i & 0x3, i, wq[i]);
-+	}
-+	vfree(wq);
-+	return 0;
-+}
-+
-+static ssize_t qman_fqd_dest_wq_write(struct file *f, const char __user *buf,
-+				      size_t count, loff_t *off)
-+{
-+	int ret;
-+	unsigned long val;
-+
-+	ret = user_input_convert(buf, count, &val);
-+	if (ret)
-+		return ret;
-+	if (val > 0xFFFF)
-+		return -EINVAL;
-+	qman_dest_wq_data.wq_id = val;
-+	return count;
-+}
-+
-+static int qman_fqd_dest_wq_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, qman_fqd_dest_wq_show, NULL);
-+}
-+
-+static const struct file_operations qman_fqd_dest_wq_fops =  {
-+	.owner          = THIS_MODULE,
-+	.open		= qman_fqd_dest_wq_open,
-+	.read           = seq_read,
-+	.write		= qman_fqd_dest_wq_write,
-+};
-+
-+/*******************************************************************************
-+ *  QMan Intra-Class Scheduling Credit
-+ ******************************************************************************/
-+static int qman_fqd_cred_show(struct seq_file *file, void *offset)
-+{
-+	struct qm_fqd fqd;
-+	struct qman_fq fq;
-+	int ret, i;
-+	u32 fq_cnt = 0;
-+	struct line_buffer_fq line_buf;
-+
-+	memset(&line_buf, 0, sizeof(line_buf));
-+	seq_puts(file, "List of fq ids with Intra-Class Scheduling Credit > 0"
-+			"\n");
-+
-+	for (i = 1; i < fqid_max; i++) {
-+		fq.fqid = i;
-+		memset(&fqd, 0, sizeof(struct qm_fqd));
-+		ret = qman_query_fq(&fq, &fqd);
-+		if (ret)
-+			return ret;
-+		if (fqd.ics_cred > 0) {
-+			add_to_line_buffer(&line_buf, fq.fqid, file);
-+			fq_cnt++;
-+		}
-+	}
-+	flush_line_buffer(&line_buf, file);
-+
-+	seq_printf(file, "Total FQD with ics_cred > 0 = %d\n", fq_cnt);
-+	return 0;
-+}
-+
-+static int qman_fqd_cred_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, qman_fqd_cred_show, NULL);
-+}
-+
-+static const struct file_operations qman_fqd_cred_fops =  {
-+	.owner          = THIS_MODULE,
-+	.open		= qman_fqd_cred_open,
-+	.read           = seq_read,
-+};
-+
-+/*******************************************************************************
-+ *  Class Queue Fields
-+ ******************************************************************************/
-+struct query_cq_fields_data_s {
-+	u32 cqid;
-+};
-+
-+static struct query_cq_fields_data_s query_cq_fields_data = {
-+	.cqid = 1,
-+};
-+
-+static int query_cq_fields_show(struct seq_file *file, void *offset)
-+{
-+	int ret;
-+	struct qm_mcr_ceetm_cq_query query_result;
-+	unsigned int cqid;
-+	unsigned int portal;
-+
-+	if ((qman_ip_rev & 0xFF00) < QMAN_REV30)
-+		return -EINVAL;
-+
-+	cqid = query_cq_fields_data.cqid & 0x00FFFFFF;
-+	portal = query_cq_fields_data.cqid >> 24;
-+	if (portal > qm_dc_portal_fman1)
-+		return -EINVAL;
-+
-+	ret = qman_ceetm_query_cq(cqid, portal, &query_result);
-+	if (ret)
-+		return ret;
-+	seq_printf(file, "Query CQ Fields Result cqid 0x%x on DCP %d\n",
-+								cqid, portal);
-+	seq_printf(file, " ccgid: %u\n", query_result.ccgid);
-+	seq_printf(file, " state: %u\n", query_result.state);
-+	seq_printf(file, " pfdr_hptr: %u\n", query_result.pfdr_hptr);
-+	seq_printf(file, " pfdr_tptr: %u\n", query_result.pfdr_tptr);
-+	seq_printf(file, " od1_xsfdr: %u\n", query_result.od1_xsfdr);
-+	seq_printf(file, " od2_xsfdr: %u\n", query_result.od2_xsfdr);
-+	seq_printf(file, " od3_xsfdr: %u\n", query_result.od3_xsfdr);
-+	seq_printf(file, " od4_xsfdr: %u\n", query_result.od4_xsfdr);
-+	seq_printf(file, " od5_xsfdr: %u\n", query_result.od5_xsfdr);
-+	seq_printf(file, " od6_xsfdr: %u\n", query_result.od6_xsfdr);
-+	seq_printf(file, " ra1_xsfdr: %u\n", query_result.ra1_xsfdr);
-+	seq_printf(file, " ra2_xsfdr: %u\n", query_result.ra2_xsfdr);
-+	seq_printf(file, " frame_count: %u\n", query_result.frm_cnt);
-+
-+	return 0;
-+}
-+
-+static int query_cq_fields_open(struct inode *inode,
-+					struct file *file)
-+{
-+	return single_open(file, query_cq_fields_show, NULL);
-+}
-+
-+static ssize_t query_cq_fields_write(struct file *f,
-+			const char __user *buf, size_t count, loff_t *off)
-+{
-+	int ret;
-+	unsigned long val;
-+
-+	ret = user_input_convert(buf, count, &val);
-+	if (ret)
-+		return ret;
-+	query_cq_fields_data.cqid = (u32)val;
-+	return count;
-+}
-+
-+static const struct file_operations query_cq_fields_fops = {
-+	.owner          = THIS_MODULE,
-+	.open		= query_cq_fields_open,
-+	.read           = seq_read,
-+	.write		= query_cq_fields_write,
-+	.release	= single_release,
-+};
-+
-+/*******************************************************************************
-+ *  READ CEETM_XSFDR_IN_USE
-+ ******************************************************************************/
-+struct query_ceetm_xsfdr_data_s {
-+	enum qm_dc_portal dcp_portal;
-+};
-+
-+static struct query_ceetm_xsfdr_data_s query_ceetm_xsfdr_data;
-+
-+static int query_ceetm_xsfdr_show(struct seq_file *file, void *offset)
-+{
-+	int ret;
-+	unsigned int xsfdr_in_use;
-+	enum qm_dc_portal portal;
-+
-+
-+	if (qman_ip_rev < QMAN_REV31)
-+		return -EINVAL;
-+
-+	portal = query_ceetm_xsfdr_data.dcp_portal;
-+	ret = qman_ceetm_get_xsfdr(portal, &xsfdr_in_use);
-+	if (ret) {
-+		seq_printf(file, "Read CEETM_XSFDR_IN_USE on DCP %d failed\n",
-+								portal);
-+		return ret;
-+	}
-+
-+	seq_printf(file, "DCP%d: CEETM_XSFDR_IN_USE number is %u\n", portal,
-+						(xsfdr_in_use & 0x1FFF));
-+	return 0;
-+}
-+
-+static int query_ceetm_xsfdr_open(struct inode *inode,
-+					struct file *file)
-+{
-+	return single_open(file, query_ceetm_xsfdr_show, NULL);
-+}
-+
-+static ssize_t query_ceetm_xsfdr_write(struct file *f,
-+			const char __user *buf, size_t count, loff_t *off)
-+{
-+	int ret;
-+	unsigned long val;
-+
-+	ret = user_input_convert(buf, count, &val);
-+	if (ret)
-+		return ret;
-+	if (val > qm_dc_portal_fman1)
-+		return -EINVAL;
-+	query_ceetm_xsfdr_data.dcp_portal = (u32)val;
-+	return count;
-+}
-+
-+static const struct file_operations query_ceetm_xsfdr_fops = {
-+	.owner          = THIS_MODULE,
-+	.open		= query_ceetm_xsfdr_open,
-+	.read           = seq_read,
-+	.write		= query_ceetm_xsfdr_write,
-+	.release	= single_release,
-+};
-+
-+/* helper macros used in qman_debugfs_module_init */
-+#define QMAN_DBGFS_ENTRY(name, mode, parent, data, fops) \
-+	do { \
-+		d = debugfs_create_file(name, \
-+			mode, parent, \
-+			data, \
-+			fops); \
-+		if (d == NULL) { \
-+			ret = -ENOMEM; \
-+			goto _return; \
-+		} \
-+	} while (0)
-+
-+/* dfs_root as parent */
-+#define QMAN_DBGFS_ENTRY_ROOT(name, mode, data, fops) \
-+	QMAN_DBGFS_ENTRY(name, mode, dfs_root, data, fops)
-+
-+/* fqd_root as parent */
-+#define QMAN_DBGFS_ENTRY_FQDROOT(name, mode, data, fops) \
-+	QMAN_DBGFS_ENTRY(name, mode, fqd_root, data, fops)
-+
-+/* fqd state */
-+#define QMAN_DBGFS_ENTRY_FQDSTATE(name, index) \
-+	QMAN_DBGFS_ENTRY_FQDROOT(name, S_IRUGO, \
-+	(void *)&mask_filter[index], &qman_fqd_ctrl_fops)
-+
-+static int __init qman_debugfs_module_init(void)
-+{
-+	int ret = 0;
-+	struct dentry *d, *fqd_root;
-+	u32 reg;
-+
-+	fqid_max = 0;
-+	init_ccsrmempeek();
-+	if (qman_ccsr_start) {
-+		if (!qman_ccsrmempeek(&reg, QM_FQD_AR)) {
-+			/* extract the size of the FQD window */
-+			reg = reg & 0x3f;
-+			/* calculate valid frame queue descriptor range */
-+			fqid_max = (1 << (reg + 1)) / QM_FQD_BLOCK_SIZE;
-+		}
-+	}
-+	dfs_root = debugfs_create_dir("qman", NULL);
-+	fqd_root = debugfs_create_dir("fqd", dfs_root);
-+	if (dfs_root == NULL || fqd_root == NULL) {
-+		ret = -ENOMEM;
-+		pr_err("Cannot create qman/fqd debugfs dir\n");
-+		goto _return;
-+	}
-+	if (fqid_max) {
-+		QMAN_DBGFS_ENTRY_ROOT("ccsrmempeek", S_IRUGO | S_IWUGO,
-+				NULL, &qman_ccsrmempeek_fops);
-+	}
-+	QMAN_DBGFS_ENTRY_ROOT("query_fq_np_fields", S_IRUGO | S_IWUGO,
-+		&query_fq_np_fields_data, &query_fq_np_fields_fops);
-+
-+	QMAN_DBGFS_ENTRY_ROOT("query_fq_fields", S_IRUGO | S_IWUGO,
-+		&query_fq_fields_data, &query_fq_fields_fops);
-+
-+	QMAN_DBGFS_ENTRY_ROOT("query_wq_lengths", S_IRUGO | S_IWUGO,
-+		&query_wq_lengths_data, &query_wq_lengths_fops);
-+
-+	QMAN_DBGFS_ENTRY_ROOT("query_cgr", S_IRUGO | S_IWUGO,
-+		&query_cgr_data, &query_cgr_fops);
-+
-+	QMAN_DBGFS_ENTRY_ROOT("query_congestion", S_IRUGO,
-+		NULL, &query_congestion_fops);
-+
-+	QMAN_DBGFS_ENTRY_ROOT("testwrite_cgr", S_IRUGO,
-+		NULL, &testwrite_cgr_fops);
-+
-+	QMAN_DBGFS_ENTRY_ROOT("testwrite_cgr_cgrid", S_IRUGO | S_IWUGO,
-+		NULL, &teswrite_cgr_cgrid_fops);
-+
-+	QMAN_DBGFS_ENTRY_ROOT("testwrite_cgr_ibcnt", S_IRUGO | S_IWUGO,
-+		NULL, &teswrite_cgr_ibcnt_fops);
-+
-+	QMAN_DBGFS_ENTRY_ROOT("query_ceetm_ccgr", S_IRUGO | S_IWUGO,
-+		&query_ccgr_data, &query_ccgr_fops);
-+	/* Create files with fqd_root as parent */
-+
-+	QMAN_DBGFS_ENTRY_FQDROOT("stateoos", S_IRUGO,
-+		(void *)&fqd_states[QM_MCR_NP_STATE_OOS], &qman_fqd_state_fops);
-+
-+	QMAN_DBGFS_ENTRY_FQDROOT("state_retired", S_IRUGO,
-+		(void *)&fqd_states[QM_MCR_NP_STATE_RETIRED],
-+		&qman_fqd_state_fops);
-+
-+	QMAN_DBGFS_ENTRY_FQDROOT("state_tentatively_sched", S_IRUGO,
-+		(void *)&fqd_states[QM_MCR_NP_STATE_TEN_SCHED],
-+		&qman_fqd_state_fops);
-+
-+	QMAN_DBGFS_ENTRY_FQDROOT("state_truly_sched", S_IRUGO,
-+		(void *)&fqd_states[QM_MCR_NP_STATE_TRU_SCHED],
-+		&qman_fqd_state_fops);
-+
-+	QMAN_DBGFS_ENTRY_FQDROOT("state_parked", S_IRUGO,
-+		(void *)&fqd_states[QM_MCR_NP_STATE_PARKED],
-+		&qman_fqd_state_fops);
-+
-+	QMAN_DBGFS_ENTRY_FQDROOT("state_active", S_IRUGO,
-+		(void *)&fqd_states[QM_MCR_NP_STATE_ACTIVE],
-+		&qman_fqd_state_fops);
-+	QMAN_DBGFS_ENTRY_ROOT("query_cq_fields", S_IRUGO | S_IWUGO,
-+		&query_cq_fields_data, &query_cq_fields_fops);
-+	QMAN_DBGFS_ENTRY_ROOT("query_ceetm_xsfdr_in_use", S_IRUGO | S_IWUGO,
-+		&query_ceetm_xsfdr_data, &query_ceetm_xsfdr_fops);
-+
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("cge_enable", 17);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("cge_disable", 16);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("tde_enable", 15);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("tde_disable", 14);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("orp_enable", 13);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("orp_disable", 12);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("ctx_a_stashing_enable", 11);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("ctx_a_stashing_disable", 10);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("cpc_enable", 9);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("cpc_disable", 8);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("sfdr_enable", 7);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("sfdr_disable", 6);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("avoid_blocking_enable", 5);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("avoid_blocking_disable", 4);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("hold_active_enable", 3);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("hold_active_disable", 2);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("prefer_in_cache_enable", 1);
-+
-+	QMAN_DBGFS_ENTRY_FQDSTATE("prefer_in_cache_disable", 0);
-+
-+	QMAN_DBGFS_ENTRY_FQDROOT("summary", S_IRUGO,
-+		NULL, &qman_fqd_summary_fops);
-+
-+	QMAN_DBGFS_ENTRY_FQDROOT("wq", S_IRUGO | S_IWUGO,
-+		NULL, &qman_fqd_dest_wq_fops);
-+
-+	QMAN_DBGFS_ENTRY_FQDROOT("cred", S_IRUGO,
-+		NULL, &qman_fqd_cred_fops);
-+
-+	return 0;
-+
-+_return:
-+	debugfs_remove_recursive(dfs_root);
-+	return ret;
-+}
-+
-+static void __exit qman_debugfs_module_exit(void)
-+{
-+	debugfs_remove_recursive(dfs_root);
-+}
-+
-+module_init(qman_debugfs_module_init);
-+module_exit(qman_debugfs_module_exit);
-+MODULE_LICENSE("Dual BSD/GPL");
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/qman_driver.c
-@@ -0,0 +1,961 @@
-+/* Copyright 2008-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "qman_private.h"
-+
-+#include <asm/smp.h>	/* hard_smp_processor_id() if !CONFIG_SMP */
-+#ifdef CONFIG_HOTPLUG_CPU
-+#include <linux/cpu.h>
-+#endif
-+
-+/* Global variable containing revision id (even on non-control plane systems
-+ * where CCSR isn't available) */
-+u16 qman_ip_rev;
-+EXPORT_SYMBOL(qman_ip_rev);
-+u8 qman_ip_cfg;
-+EXPORT_SYMBOL(qman_ip_cfg);
-+u16 qm_channel_pool1 = QMAN_CHANNEL_POOL1;
-+EXPORT_SYMBOL(qm_channel_pool1);
-+u16 qm_channel_caam = QMAN_CHANNEL_CAAM;
-+EXPORT_SYMBOL(qm_channel_caam);
-+u16 qm_channel_pme = QMAN_CHANNEL_PME;
-+EXPORT_SYMBOL(qm_channel_pme);
-+u16 qm_channel_dce = QMAN_CHANNEL_DCE;
-+EXPORT_SYMBOL(qm_channel_dce);
-+u16 qman_portal_max;
-+EXPORT_SYMBOL(qman_portal_max);
-+
-+u32 qman_clk;
-+struct qm_ceetm qman_ceetms[QMAN_CEETM_MAX];
-+/* the qman ceetm instances on the given SoC */
-+u8 num_ceetms;
-+
-+/* For these variables, and the portal-initialisation logic, the
-+ * comments in bman_driver.c apply here so won't be repeated. */
-+static struct qman_portal *shared_portals[NR_CPUS];
-+static int num_shared_portals;
-+static int shared_portals_idx;
-+static LIST_HEAD(unused_pcfgs);
-+static DEFINE_SPINLOCK(unused_pcfgs_lock);
-+
-+/* A SDQCR mask comprising all the available/visible pool channels */
-+static u32 pools_sdqcr;
-+
-+#define STR_ERR_NOPROP	    "No '%s' property in node %s\n"
-+#define STR_ERR_CELL	    "'%s' is not a %d-cell range in node %s\n"
-+#define STR_FQID_RANGE	    "fsl,fqid-range"
-+#define STR_POOL_CHAN_RANGE "fsl,pool-channel-range"
-+#define STR_CGRID_RANGE	     "fsl,cgrid-range"
-+
-+/* A "fsl,fqid-range" node; release the given range to the allocator */
-+static __init int fsl_fqid_range_init(struct device_node *node)
-+{
-+	int ret;
-+	const u32 *range = of_get_property(node, STR_FQID_RANGE, &ret);
-+	if (!range) {
-+		pr_err(STR_ERR_NOPROP, STR_FQID_RANGE, node->full_name);
-+		return -EINVAL;
-+	}
-+	if (ret != 8) {
-+		pr_err(STR_ERR_CELL, STR_FQID_RANGE, 2, node->full_name);
-+		return -EINVAL;
-+	}
-+	qman_seed_fqid_range(be32_to_cpu(range[0]), be32_to_cpu(range[1]));
-+	pr_info("Qman: FQID allocator includes range %d:%d\n",
-+		be32_to_cpu(range[0]), be32_to_cpu(range[1]));
-+	return 0;
-+}
-+
-+/* A "fsl,pool-channel-range" node; add to the SDQCR mask only */
-+static __init int fsl_pool_channel_range_sdqcr(struct device_node *node)
-+{
-+	int ret;
-+	const u32 *chanid = of_get_property(node, STR_POOL_CHAN_RANGE, &ret);
-+	if (!chanid) {
-+		pr_err(STR_ERR_NOPROP, STR_POOL_CHAN_RANGE, node->full_name);
-+		return -EINVAL;
-+	}
-+	if (ret != 8) {
-+		pr_err(STR_ERR_CELL, STR_POOL_CHAN_RANGE, 1, node->full_name);
-+		return -EINVAL;
-+	}
-+	for (ret = 0; ret < be32_to_cpu(chanid[1]); ret++)
-+		pools_sdqcr |= QM_SDQCR_CHANNELS_POOL_CONV(be32_to_cpu(chanid[0]) + ret);
-+	return 0;
-+}
-+
-+/* A "fsl,pool-channel-range" node; release the given range to the allocator */
-+static __init int fsl_pool_channel_range_init(struct device_node *node)
-+{
-+	int ret;
-+	const u32 *chanid = of_get_property(node, STR_POOL_CHAN_RANGE, &ret);
-+	if (!chanid) {
-+		pr_err(STR_ERR_NOPROP, STR_POOL_CHAN_RANGE, node->full_name);
-+		return -EINVAL;
-+	}
-+	if (ret != 8) {
-+		pr_err(STR_ERR_CELL, STR_POOL_CHAN_RANGE, 1, node->full_name);
-+		return -EINVAL;
-+	}
-+	qman_seed_pool_range(be32_to_cpu(chanid[0]), be32_to_cpu(chanid[1]));
-+	pr_info("Qman: pool channel allocator includes range %d:%d\n",
-+		be32_to_cpu(chanid[0]), be32_to_cpu(chanid[1]));
-+	return 0;
-+}
-+
-+/* A "fsl,cgrid-range" node; release the given range to the allocator */
-+static __init int fsl_cgrid_range_init(struct device_node *node)
-+{
-+	struct qman_cgr cgr;
-+	int ret, errors = 0;
-+	const u32 *range = of_get_property(node, STR_CGRID_RANGE, &ret);
-+	if (!range) {
-+		pr_err(STR_ERR_NOPROP, STR_CGRID_RANGE, node->full_name);
-+		return -EINVAL;
-+	}
-+	if (ret != 8) {
-+		pr_err(STR_ERR_CELL, STR_CGRID_RANGE, 2, node->full_name);
-+		return -EINVAL;
-+	}
-+	qman_seed_cgrid_range(be32_to_cpu(range[0]), be32_to_cpu(range[1]));
-+	pr_info("Qman: CGRID allocator includes range %d:%d\n",
-+		be32_to_cpu(range[0]), be32_to_cpu(range[1]));
-+	for (cgr.cgrid = 0; cgr.cgrid < __CGR_NUM; cgr.cgrid++) {
-+		ret = qman_modify_cgr(&cgr, QMAN_CGR_FLAG_USE_INIT, NULL);
-+		if (ret)
-+			errors++;
-+	}
-+	if (errors)
-+		pr_err("Warning: %d error%s while initialising CGRs %d:%d\n",
-+			errors, (errors > 1) ? "s" : "", range[0], range[1]);
-+	return 0;
-+}
-+
-+static __init int fsl_ceetm_init(struct device_node *node)
-+{
-+	enum qm_dc_portal dcp_portal;
-+	struct qm_ceetm_sp *sp;
-+	struct qm_ceetm_lni *lni;
-+	int ret, i;
-+	const u32 *range;
-+
-+	/* Find LFQID range */
-+	range = of_get_property(node, "fsl,ceetm-lfqid-range", &ret);
-+	if (!range) {
-+		pr_err("No fsl,ceetm-lfqid-range in node %s\n",
-+							node->full_name);
-+		return -EINVAL;
-+	}
-+	if (ret != 8) {
-+		pr_err("fsl,ceetm-lfqid-range is not a 2-cell range in node"
-+					" %s\n", node->full_name);
-+		return -EINVAL;
-+	}
-+
-+	dcp_portal = (be32_to_cpu(range[0]) & 0x0F0000) >> 16;
-+	if (dcp_portal > qm_dc_portal_fman1) {
-+		pr_err("The DCP portal %d doesn't support CEETM\n", dcp_portal);
-+		return -EINVAL;
-+	}
-+
-+	if (dcp_portal == qm_dc_portal_fman0)
-+		qman_seed_ceetm0_lfqid_range(be32_to_cpu(range[0]), be32_to_cpu(range[1]));
-+	if (dcp_portal == qm_dc_portal_fman1)
-+		qman_seed_ceetm1_lfqid_range(be32_to_cpu(range[0]), be32_to_cpu(range[1]));
-+	pr_debug("Qman: The lfqid allocator of CEETM %d includes range"
-+		 " 0x%x:0x%x\n", dcp_portal, be32_to_cpu(range[0]), be32_to_cpu(range[1]));
-+
-+	qman_ceetms[dcp_portal].idx = dcp_portal;
-+	INIT_LIST_HEAD(&qman_ceetms[dcp_portal].sub_portals);
-+	INIT_LIST_HEAD(&qman_ceetms[dcp_portal].lnis);
-+
-+	/* Find Sub-portal range */
-+	range = of_get_property(node, "fsl,ceetm-sp-range", &ret);
-+	if (!range) {
-+		pr_err("No fsl,ceetm-sp-range in node %s\n", node->full_name);
-+		return -EINVAL;
-+	}
-+	if (ret != 8) {
-+		pr_err("fsl,ceetm-sp-range is not a 2-cell range in node %s\n",
-+							node->full_name);
-+		return -EINVAL;
-+	}
-+
-+	for (i = 0; i < be32_to_cpu(range[1]); i++) {
-+		sp = kzalloc(sizeof(*sp), GFP_KERNEL);
-+		if (!sp) {
-+			pr_err("Can't alloc memory for sub-portal %d\n",
-+							range[0] + i);
-+			return -ENOMEM;
-+		}
-+		sp->idx = be32_to_cpu(range[0]) + i;
-+		sp->dcp_idx = dcp_portal;
-+		sp->is_claimed = 0;
-+		list_add_tail(&sp->node, &qman_ceetms[dcp_portal].sub_portals);
-+		sp++;
-+	}
-+	pr_debug("Qman: Reserve sub-portal %d:%d for CEETM %d\n",
-+		 be32_to_cpu(range[0]), be32_to_cpu(range[1]), dcp_portal);
-+	qman_ceetms[dcp_portal].sp_range[0] = be32_to_cpu(range[0]);
-+	qman_ceetms[dcp_portal].sp_range[1] = be32_to_cpu(range[1]);
-+
-+	/* Find LNI range */
-+	range = of_get_property(node, "fsl,ceetm-lni-range", &ret);
-+	if (!range) {
-+		pr_err("No fsl,ceetm-lni-range in node %s\n", node->full_name);
-+		return -EINVAL;
-+	}
-+	if (ret != 8) {
-+		pr_err("fsl,ceetm-lni-range is not a 2-cell range in node %s\n",
-+							node->full_name);
-+		return -EINVAL;
-+	}
-+
-+	for (i = 0; i < be32_to_cpu(range[1]); i++) {
-+		lni = kzalloc(sizeof(*lni), GFP_KERNEL);
-+		if (!lni) {
-+			pr_err("Can't alloc memory for LNI %d\n",
-+							range[0] + i);
-+			return -ENOMEM;
-+		}
-+		lni->idx = be32_to_cpu(range[0]) + i;
-+		lni->dcp_idx = dcp_portal;
-+		lni->is_claimed = 0;
-+		INIT_LIST_HEAD(&lni->channels);
-+		list_add_tail(&lni->node, &qman_ceetms[dcp_portal].lnis);
-+		lni++;
-+	}
-+	pr_debug("Qman: Reserve LNI %d:%d for CEETM %d\n",
-+		 be32_to_cpu(range[0]), be32_to_cpu(range[1]), dcp_portal);
-+	qman_ceetms[dcp_portal].lni_range[0] = be32_to_cpu(range[0]);
-+	qman_ceetms[dcp_portal].lni_range[1] = be32_to_cpu(range[1]);
-+
-+	/* Find CEETM channel range */
-+	range = of_get_property(node, "fsl,ceetm-channel-range", &ret);
-+	if (!range) {
-+		pr_err("No fsl,ceetm-channel-range in node %s\n",
-+							node->full_name);
-+		return -EINVAL;
-+	}
-+	if (ret != 8) {
-+		pr_err("fsl,ceetm-channel-range is not a 2-cell range in node"
-+						"%s\n", node->full_name);
-+		return -EINVAL;
-+	}
-+
-+	if (dcp_portal == qm_dc_portal_fman0)
-+		qman_seed_ceetm0_channel_range(be32_to_cpu(range[0]), be32_to_cpu(range[1]));
-+	if (dcp_portal == qm_dc_portal_fman1)
-+		qman_seed_ceetm1_channel_range(be32_to_cpu(range[0]), be32_to_cpu(range[1]));
-+	pr_debug("Qman: The channel allocator of CEETM %d includes"
-+		 " range %d:%d\n", dcp_portal, be32_to_cpu(range[0]), be32_to_cpu(range[1]));
-+
-+	/* Set CEETM PRES register */
-+	ret = qman_ceetm_set_prescaler(dcp_portal);
-+	if (ret)
-+		return ret;
-+	return 0;
-+}
-+
-+static void qman_get_ip_revision(struct device_node *dn)
-+{
-+	u16 ip_rev = 0;
-+	u8 ip_cfg = QMAN_REV_CFG_0;
-+	for_each_compatible_node(dn, NULL, "fsl,qman-portal") {
-+		if (!of_device_is_available(dn))
-+			continue;
-+		if (of_device_is_compatible(dn, "fsl,qman-portal-1.0") ||
-+			of_device_is_compatible(dn, "fsl,qman-portal-1.0.0")) {
-+			pr_err("QMAN rev1.0 on P4080 rev1 is not supported!\n");
-+			BUG_ON(1);
-+		} else if (of_device_is_compatible(dn, "fsl,qman-portal-1.1") ||
-+			of_device_is_compatible(dn, "fsl,qman-portal-1.1.0")) {
-+			ip_rev = QMAN_REV11;
-+			qman_portal_max = 10;
-+		} else if (of_device_is_compatible(dn, "fsl,qman-portal-1.2") ||
-+			of_device_is_compatible(dn, "fsl,qman-portal-1.2.0")) {
-+			ip_rev = QMAN_REV12;
-+			qman_portal_max = 10;
-+		} else if (of_device_is_compatible(dn, "fsl,qman-portal-2.0") ||
-+			of_device_is_compatible(dn, "fsl,qman-portal-2.0.0")) {
-+			ip_rev = QMAN_REV20;
-+			qman_portal_max = 3;
-+		} else if (of_device_is_compatible(dn,
-+						"fsl,qman-portal-3.0.0")) {
-+			ip_rev = QMAN_REV30;
-+			qman_portal_max = 50;
-+		} else if (of_device_is_compatible(dn,
-+						"fsl,qman-portal-3.0.1")) {
-+			ip_rev = QMAN_REV30;
-+			qman_portal_max = 25;
-+			ip_cfg = QMAN_REV_CFG_1;
-+		} else if (of_device_is_compatible(dn,
-+						"fsl,qman-portal-3.1.0")) {
-+			ip_rev = QMAN_REV31;
-+			qman_portal_max = 50;
-+		} else if (of_device_is_compatible(dn,
-+						"fsl,qman-portal-3.1.1")) {
-+			ip_rev = QMAN_REV31;
-+			qman_portal_max = 25;
-+			ip_cfg = QMAN_REV_CFG_1;
-+		} else if (of_device_is_compatible(dn,
-+						"fsl,qman-portal-3.1.2")) {
-+			ip_rev = QMAN_REV31;
-+			qman_portal_max = 18;
-+			ip_cfg = QMAN_REV_CFG_2;
-+		} else if (of_device_is_compatible(dn,
-+						"fsl,qman-portal-3.1.3")) {
-+			ip_rev = QMAN_REV31;
-+			qman_portal_max = 10;
-+			ip_cfg = QMAN_REV_CFG_3;
-+		} else if (of_device_is_compatible(dn,
-+						"fsl,qman-portal-3.2.0")) {
-+			ip_rev = QMAN_REV32;
-+			qman_portal_max = 10;
-+			ip_cfg = QMAN_REV_CFG_3; // TODO: Verify for ls1043
-+		} else if (of_device_is_compatible(dn,
-+						"fsl,qman-portal-3.2.1")) {
-+			ip_rev = QMAN_REV32;
-+			qman_portal_max = 10;
-+			ip_cfg = QMAN_REV_CFG_3;
-+		} else {
-+			pr_warn("unknown QMan version in portal node,"
-+				"default to rev1.1\n");
-+			ip_rev = QMAN_REV11;
-+			qman_portal_max = 10;
-+		}
-+
-+		if (!qman_ip_rev) {
-+			if (ip_rev) {
-+				qman_ip_rev = ip_rev;
-+				qman_ip_cfg = ip_cfg;
-+			} else {
-+				pr_warn("unknown Qman version,"
-+					" default to rev1.1\n");
-+				qman_ip_rev = QMAN_REV11;
-+				qman_ip_cfg = QMAN_REV_CFG_0;
-+			}
-+		} else if (ip_rev && (qman_ip_rev != ip_rev))
-+			pr_warn("Revision=0x%04x, but portal '%s' has"
-+							" 0x%04x\n",
-+			qman_ip_rev, dn->full_name, ip_rev);
-+		if (qman_ip_rev == ip_rev)
-+			break;
-+	}
-+}
-+
-+/* Parse a portal node, perform generic mapping duties and return the config. It
-+ * is not known at this stage for what purpose (or even if) the portal will be
-+ * used. */
-+static struct qm_portal_config * __init parse_pcfg(struct device_node *node)
-+{
-+	struct qm_portal_config *pcfg;
-+	const u32 *index_p;
-+	u32 index, channel;
-+	int irq, ret;
-+	resource_size_t len;
-+
-+	pcfg = kmalloc(sizeof(*pcfg), GFP_KERNEL);
-+	if (!pcfg) {
-+		pr_err("can't allocate portal config");
-+		return NULL;
-+	}
-+
-+	/*
-+	 * This is a *horrible hack*, but the IOMMU/PAMU driver needs a
-+	 * 'struct device' in order to get the PAMU stashing setup and the QMan
-+	 * portal [driver] won't function at all without ring stashing
-+	 *
-+	 * Making the QMan portal driver nice and proper is part of the
-+	 * upstreaming effort
-+	 */
-+	pcfg->dev.bus = &platform_bus_type;
-+	pcfg->dev.of_node = node;
-+#ifdef CONFIG_FSL_PAMU
-+	pcfg->dev.archdata.iommu_domain = NULL;
-+#endif
-+
-+	ret = of_address_to_resource(node, DPA_PORTAL_CE,
-+				&pcfg->addr_phys[DPA_PORTAL_CE]);
-+	if (ret) {
-+		pr_err("Can't get %s property '%s'\n", node->full_name,
-+			"reg::CE");
-+		goto err;
-+	}
-+	ret = of_address_to_resource(node, DPA_PORTAL_CI,
-+				&pcfg->addr_phys[DPA_PORTAL_CI]);
-+	if (ret) {
-+		pr_err("Can't get %s property '%s'\n", node->full_name,
-+			"reg::CI");
-+		goto err;
-+	}
-+	index_p = of_get_property(node, "cell-index", &ret);
-+	if (!index_p || (ret != 4)) {
-+		pr_err("Can't get %s property '%s'\n", node->full_name,
-+			"cell-index");
-+		goto err;
-+	}
-+	index = be32_to_cpu(*index_p);
-+	if (index >= qman_portal_max) {
-+		pr_err("QMan portal index %d is beyond max (%d)\n",
-+		       index, qman_portal_max);
-+		goto err;
-+	}
-+
-+	channel = index + QM_CHANNEL_SWPORTAL0;
-+	pcfg->public_cfg.channel = channel;
-+	pcfg->public_cfg.cpu = -1;
-+	irq = irq_of_parse_and_map(node, 0);
-+	if (irq == 0) {
-+		pr_err("Can't get %s property '%s'\n", node->full_name,
-+			"interrupts");
-+		goto err;
-+	}
-+	pcfg->public_cfg.irq = irq;
-+	pcfg->public_cfg.index = index;
-+#ifdef CONFIG_FSL_QMAN_CONFIG
-+	/* We need the same LIODN offset for all portals */
-+	qman_liodn_fixup(pcfg->public_cfg.channel);
-+#endif
-+
-+	len = resource_size(&pcfg->addr_phys[DPA_PORTAL_CE]);
-+	if (len != (unsigned long)len)
-+		goto err;
-+
-+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+	pcfg->addr_virt[DPA_PORTAL_CE] = ioremap_cache_ns(
-+                                pcfg->addr_phys[DPA_PORTAL_CE].start,
-+                                resource_size(&pcfg->addr_phys[DPA_PORTAL_CE]));
-+
-+        pcfg->addr_virt[DPA_PORTAL_CI] = ioremap(
-+                                pcfg->addr_phys[DPA_PORTAL_CI].start,
-+                                resource_size(&pcfg->addr_phys[DPA_PORTAL_CI]));
-+#else
-+	pcfg->addr_virt[DPA_PORTAL_CE] = ioremap_prot(
-+				pcfg->addr_phys[DPA_PORTAL_CE].start,
-+				(unsigned long)len,
-+				0);
-+	pcfg->addr_virt[DPA_PORTAL_CI] = ioremap_prot(
-+				pcfg->addr_phys[DPA_PORTAL_CI].start,
-+				resource_size(&pcfg->addr_phys[DPA_PORTAL_CI]),
-+				_PAGE_GUARDED | _PAGE_NO_CACHE);
-+#endif
-+	return pcfg;
-+err:
-+	kfree(pcfg);
-+	return NULL;
-+}
-+
-+static struct qm_portal_config *get_pcfg(struct list_head *list)
-+{
-+	struct qm_portal_config *pcfg;
-+	if (list_empty(list))
-+		return NULL;
-+	pcfg = list_entry(list->prev, struct qm_portal_config, list);
-+	list_del(&pcfg->list);
-+	return pcfg;
-+}
-+
-+static struct qm_portal_config *get_pcfg_idx(struct list_head *list, u32 idx)
-+{
-+	struct qm_portal_config *pcfg;
-+	if (list_empty(list))
-+		return NULL;
-+	list_for_each_entry(pcfg, list, list) {
-+		if (pcfg->public_cfg.index == idx) {
-+			list_del(&pcfg->list);
-+			return pcfg;
-+		}
-+	}
-+	return NULL;
-+}
-+
-+static void portal_set_cpu(struct qm_portal_config *pcfg, int cpu)
-+{
-+#ifdef CONFIG_FSL_PAMU
-+	int ret;
-+	int window_count = 1;
-+	struct iommu_domain_geometry geom_attr;
-+	struct pamu_stash_attribute stash_attr;
-+
-+	pcfg->iommu_domain = iommu_domain_alloc(&platform_bus_type);
-+	if (!pcfg->iommu_domain) {
-+		pr_err(KBUILD_MODNAME ":%s(): iommu_domain_alloc() failed",
-+			   __func__);
-+		goto _no_iommu;
-+	}
-+	geom_attr.aperture_start = 0;
-+	geom_attr.aperture_end =
-+		((dma_addr_t)1 << min(8 * sizeof(dma_addr_t), (size_t)36)) - 1;
-+	geom_attr.force_aperture = true;
-+	ret = iommu_domain_set_attr(pcfg->iommu_domain, DOMAIN_ATTR_GEOMETRY,
-+				    &geom_attr);
-+	if (ret < 0) {
-+		pr_err(KBUILD_MODNAME ":%s(): iommu_domain_set_attr() = %d",
-+			   __func__, ret);
-+		goto _iommu_domain_free;
-+	}
-+	ret = iommu_domain_set_attr(pcfg->iommu_domain, DOMAIN_ATTR_WINDOWS,
-+				    &window_count);
-+	if (ret < 0) {
-+		pr_err(KBUILD_MODNAME ":%s(): iommu_domain_set_attr() = %d",
-+			   __func__, ret);
-+		goto _iommu_domain_free;
-+	}
-+	stash_attr.cpu = cpu;
-+	stash_attr.cache = PAMU_ATTR_CACHE_L1;
-+	/* set stash information for the window */
-+	stash_attr.window = 0;
-+	ret = iommu_domain_set_attr(pcfg->iommu_domain,
-+				    DOMAIN_ATTR_FSL_PAMU_STASH,
-+				    &stash_attr);
-+	if (ret < 0) {
-+		pr_err(KBUILD_MODNAME ":%s(): iommu_domain_set_attr() = %d",
-+			   __func__, ret);
-+		goto _iommu_domain_free;
-+	}
-+	ret = iommu_domain_window_enable(pcfg->iommu_domain, 0, 0, 1ULL << 36,
-+					 IOMMU_READ | IOMMU_WRITE);
-+	if (ret < 0) {
-+		pr_err(KBUILD_MODNAME ":%s(): iommu_domain_window_enable() = %d",
-+			   __func__, ret);
-+		goto _iommu_domain_free;
-+	}
-+	ret = iommu_attach_device(pcfg->iommu_domain, &pcfg->dev);
-+	if (ret < 0) {
-+		pr_err(KBUILD_MODNAME ":%s(): iommu_device_attach() = %d",
-+			   __func__, ret);
-+		goto _iommu_domain_free;
-+	}
-+	ret = iommu_domain_set_attr(pcfg->iommu_domain,
-+				    DOMAIN_ATTR_FSL_PAMU_ENABLE,
-+				    &window_count);
-+	if (ret < 0) {
-+		pr_err(KBUILD_MODNAME ":%s(): iommu_domain_set_attr() = %d",
-+			   __func__, ret);
-+		goto _iommu_detach_device;
-+	}
-+
-+_no_iommu:
-+#endif
-+#ifdef CONFIG_FSL_QMAN_CONFIG
-+	if (qman_set_sdest(pcfg->public_cfg.channel, cpu))
-+#endif
-+		pr_warn("Failed to set QMan portal's stash request queue\n");
-+
-+	return;
-+
-+#ifdef CONFIG_FSL_PAMU
-+_iommu_detach_device:
-+	iommu_detach_device(pcfg->iommu_domain, NULL);
-+_iommu_domain_free:
-+	iommu_domain_free(pcfg->iommu_domain);
-+#endif
-+}
-+
-+struct qm_portal_config *qm_get_unused_portal_idx(u32 idx)
-+{
-+	struct qm_portal_config *ret;
-+	spin_lock(&unused_pcfgs_lock);
-+	if (idx == QBMAN_ANY_PORTAL_IDX)
-+		ret = get_pcfg(&unused_pcfgs);
-+	else
-+		ret = get_pcfg_idx(&unused_pcfgs, idx);
-+	spin_unlock(&unused_pcfgs_lock);
-+	/* Bind stashing LIODNs to the CPU we are currently executing on, and
-+	 * set the portal to use the stashing request queue corresonding to the
-+	 * cpu as well. The user-space driver assumption is that the pthread has
-+	 * to already be affine to one cpu only before opening a portal. If that
-+	 * check is circumvented, the only risk is a performance degradation -
-+	 * stashing will go to whatever cpu they happened to be running on when
-+	 * opening the device file, and if that isn't the cpu they subsequently
-+	 * bind to and do their polling on, tough. */
-+	if (ret)
-+		portal_set_cpu(ret, hard_smp_processor_id());
-+	return ret;
-+}
-+
-+struct qm_portal_config *qm_get_unused_portal(void)
-+{
-+	return qm_get_unused_portal_idx(QBMAN_ANY_PORTAL_IDX);
-+}
-+
-+void qm_put_unused_portal(struct qm_portal_config *pcfg)
-+{
-+	spin_lock(&unused_pcfgs_lock);
-+	list_add(&pcfg->list, &unused_pcfgs);
-+	spin_unlock(&unused_pcfgs_lock);
-+}
-+
-+static struct qman_portal *init_pcfg(struct qm_portal_config *pcfg)
-+{
-+	struct qman_portal *p;
-+
-+	pcfg->iommu_domain = NULL;
-+	portal_set_cpu(pcfg, pcfg->public_cfg.cpu);
-+	p = qman_create_affine_portal(pcfg, NULL);
-+	if (p) {
-+		u32 irq_sources = 0;
-+		/* Determine what should be interrupt-vs-poll driven */
-+#ifdef CONFIG_FSL_DPA_PIRQ_SLOW
-+		irq_sources |= QM_PIRQ_EQCI | QM_PIRQ_EQRI | QM_PIRQ_MRI |
-+			       QM_PIRQ_CSCI | QM_PIRQ_CCSCI;
-+#endif
-+#ifdef CONFIG_FSL_DPA_PIRQ_FAST
-+		irq_sources |= QM_PIRQ_DQRI;
-+#endif
-+		qman_p_irqsource_add(p, irq_sources);
-+		pr_info("Qman portal %sinitialised, cpu %d\n",
-+			pcfg->public_cfg.is_shared ? "(shared) " : "",
-+			pcfg->public_cfg.cpu);
-+	} else
-+		pr_crit("Qman portal failure on cpu %d\n",
-+			pcfg->public_cfg.cpu);
-+	return p;
-+}
-+
-+static void init_slave(int cpu)
-+{
-+	struct qman_portal *p;
-+	struct cpumask oldmask = current->cpus_allowed;
-+	set_cpus_allowed_ptr(current, get_cpu_mask(cpu));
-+	p = qman_create_affine_slave(shared_portals[shared_portals_idx++], cpu);
-+	if (!p)
-+		pr_err("Qman slave portal failure on cpu %d\n", cpu);
-+	else
-+		pr_info("Qman portal %sinitialised, cpu %d\n", "(slave) ", cpu);
-+	set_cpus_allowed_ptr(current, &oldmask);
-+	if (shared_portals_idx >= num_shared_portals)
-+		shared_portals_idx = 0;
-+}
-+
-+static struct cpumask want_unshared __initdata;
-+static struct cpumask want_shared __initdata;
-+
-+static int __init parse_qportals(char *str)
-+{
-+	return parse_portals_bootarg(str, &want_shared, &want_unshared,
-+				     "qportals");
-+}
-+__setup("qportals=", parse_qportals);
-+
-+static void qman_portal_update_sdest(const struct qm_portal_config *pcfg,
-+							unsigned int cpu)
-+{
-+#ifdef CONFIG_FSL_PAMU
-+	struct pamu_stash_attribute stash_attr;
-+	int ret;
-+
-+	if (pcfg->iommu_domain) {
-+		stash_attr.cpu = cpu;
-+		stash_attr.cache = PAMU_ATTR_CACHE_L1;
-+		/* set stash information for the window */
-+		stash_attr.window = 0;
-+		ret = iommu_domain_set_attr(pcfg->iommu_domain,
-+				DOMAIN_ATTR_FSL_PAMU_STASH, &stash_attr);
-+		if (ret < 0) {
-+			pr_err("Failed to update pamu stash setting\n");
-+			return;
-+		}
-+	}
-+#endif
-+#ifdef CONFIG_FSL_QMAN_CONFIG
-+	if (qman_set_sdest(pcfg->public_cfg.channel, cpu))
-+		pr_warn("Failed to update portal's stash request queue\n");
-+#endif
-+}
-+
-+static int qman_offline_cpu(unsigned int cpu)
-+{
-+	struct qman_portal *p;
-+	const struct qm_portal_config *pcfg;
-+	p = (struct qman_portal *)affine_portals[cpu];
-+	if (p) {
-+		pcfg = qman_get_qm_portal_config(p);
-+		if (pcfg) {
-+			irq_set_affinity(pcfg->public_cfg.irq, cpumask_of(0));
-+			qman_portal_update_sdest(pcfg, 0);
-+		}
-+	}
-+	return 0;
-+}
-+
-+#ifdef CONFIG_HOTPLUG_CPU
-+static int qman_online_cpu(unsigned int cpu)
-+{
-+	struct qman_portal *p;
-+	const struct qm_portal_config *pcfg;
-+	p = (struct qman_portal *)affine_portals[cpu];
-+	if (p) {
-+		pcfg = qman_get_qm_portal_config(p);
-+		if (pcfg) {
-+			irq_set_affinity(pcfg->public_cfg.irq, cpumask_of(cpu));
-+			qman_portal_update_sdest(pcfg, cpu);
-+		}
-+	}
-+	return 0;
-+}
-+
-+#endif /* CONFIG_HOTPLUG_CPU */
-+
-+__init int qman_init(void)
-+{
-+	struct cpumask slave_cpus;
-+	struct cpumask unshared_cpus = *cpu_none_mask;
-+	struct cpumask shared_cpus = *cpu_none_mask;
-+	LIST_HEAD(unshared_pcfgs);
-+	LIST_HEAD(shared_pcfgs);
-+	struct device_node *dn;
-+	struct qm_portal_config *pcfg;
-+	struct qman_portal *p;
-+	int cpu, ret;
-+	const u32 *clk;
-+	struct cpumask offline_cpus;
-+
-+	/* Initialise the Qman (CCSR) device */
-+	for_each_compatible_node(dn, NULL, "fsl,qman") {
-+		if (!qman_init_ccsr(dn))
-+			pr_info("Qman err interrupt handler present\n");
-+		else
-+			pr_err("Qman CCSR setup failed\n");
-+
-+		clk = of_get_property(dn, "clock-frequency", NULL);
-+		if (!clk)
-+			pr_warn("Can't find Qman clock frequency\n");
-+		else
-+			qman_clk = be32_to_cpu(*clk);
-+	}
-+#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
-+	/* Setup lookup table for FQ demux */
-+	ret = qman_setup_fq_lookup_table(get_qman_fqd_size()/64);
-+	if (ret)
-+		return ret;
-+#endif
-+
-+	/* Get qman ip revision */
-+	qman_get_ip_revision(dn);
-+	if ((qman_ip_rev & 0xff00) >= QMAN_REV30) {
-+		qm_channel_pool1 = QMAN_CHANNEL_POOL1_REV3;
-+		qm_channel_caam = QMAN_CHANNEL_CAAM_REV3;
-+		qm_channel_pme = QMAN_CHANNEL_PME_REV3;
-+	}
-+
-+	if ((qman_ip_rev == QMAN_REV31) && (qman_ip_cfg == QMAN_REV_CFG_2))
-+		qm_channel_dce = QMAN_CHANNEL_DCE_QMANREV312;
-+
-+	/*
-+	 * Parse the ceetm node to get how many ceetm instances are supported
-+	 * on the current silicon. num_ceetms must be confirmed before portals
-+	 * are intiailized.
-+	 */
-+	num_ceetms = 0;
-+	for_each_compatible_node(dn, NULL, "fsl,qman-ceetm")
-+		num_ceetms++;
-+
-+	/* Parse pool channels into the SDQCR mask. (Must happen before portals
-+	 * are initialised.) */
-+	for_each_compatible_node(dn, NULL, "fsl,pool-channel-range") {
-+		ret = fsl_pool_channel_range_sdqcr(dn);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	memset(affine_portals, 0, sizeof(void *) * num_possible_cpus());
-+	/* Initialise portals. See bman_driver.c for comments */
-+	for_each_compatible_node(dn, NULL, "fsl,qman-portal") {
-+		if (!of_device_is_available(dn))
-+			continue;
-+		pcfg = parse_pcfg(dn);
-+		if (pcfg) {
-+			pcfg->public_cfg.pools = pools_sdqcr;
-+			list_add_tail(&pcfg->list, &unused_pcfgs);
-+		}
-+	}
-+	for_each_possible_cpu(cpu) {
-+		if (cpumask_test_cpu(cpu, &want_shared)) {
-+			pcfg = get_pcfg(&unused_pcfgs);
-+			if (!pcfg)
-+				break;
-+			pcfg->public_cfg.cpu = cpu;
-+			list_add_tail(&pcfg->list, &shared_pcfgs);
-+			cpumask_set_cpu(cpu, &shared_cpus);
-+		}
-+		if (cpumask_test_cpu(cpu, &want_unshared)) {
-+			if (cpumask_test_cpu(cpu, &shared_cpus))
-+				continue;
-+			pcfg = get_pcfg(&unused_pcfgs);
-+			if (!pcfg)
-+				break;
-+			pcfg->public_cfg.cpu = cpu;
-+			list_add_tail(&pcfg->list, &unshared_pcfgs);
-+			cpumask_set_cpu(cpu, &unshared_cpus);
-+		}
-+	}
-+	if (list_empty(&shared_pcfgs) && list_empty(&unshared_pcfgs)) {
-+		for_each_online_cpu(cpu) {
-+			pcfg = get_pcfg(&unused_pcfgs);
-+			if (!pcfg)
-+				break;
-+			pcfg->public_cfg.cpu = cpu;
-+			list_add_tail(&pcfg->list, &unshared_pcfgs);
-+			cpumask_set_cpu(cpu, &unshared_cpus);
-+		}
-+	}
-+	cpumask_andnot(&slave_cpus, cpu_possible_mask, &shared_cpus);
-+	cpumask_andnot(&slave_cpus, &slave_cpus, &unshared_cpus);
-+	if (cpumask_empty(&slave_cpus)) {
-+		if (!list_empty(&shared_pcfgs)) {
-+			cpumask_or(&unshared_cpus, &unshared_cpus,
-+				   &shared_cpus);
-+			cpumask_clear(&shared_cpus);
-+			list_splice_tail(&shared_pcfgs, &unshared_pcfgs);
-+			INIT_LIST_HEAD(&shared_pcfgs);
-+		}
-+	} else {
-+		if (list_empty(&shared_pcfgs)) {
-+			pcfg = get_pcfg(&unshared_pcfgs);
-+			if (!pcfg) {
-+				pr_crit("No QMan portals available!\n");
-+				return 0;
-+			}
-+			cpumask_clear_cpu(pcfg->public_cfg.cpu, &unshared_cpus);
-+			cpumask_set_cpu(pcfg->public_cfg.cpu, &shared_cpus);
-+			list_add_tail(&pcfg->list, &shared_pcfgs);
-+		}
-+	}
-+	list_for_each_entry(pcfg, &unshared_pcfgs, list) {
-+		pcfg->public_cfg.is_shared = 0;
-+		p = init_pcfg(pcfg);
-+		if (!p) {
-+			pr_crit("Unable to configure portals\n");
-+			return 0;
-+		}
-+	}
-+	list_for_each_entry(pcfg, &shared_pcfgs, list) {
-+		pcfg->public_cfg.is_shared = 1;
-+		p = init_pcfg(pcfg);
-+		if (p)
-+			shared_portals[num_shared_portals++] = p;
-+	}
-+	if (!cpumask_empty(&slave_cpus))
-+		for_each_cpu(cpu, &slave_cpus)
-+			init_slave(cpu);
-+	pr_info("Qman portals initialised\n");
-+	cpumask_andnot(&offline_cpus, cpu_possible_mask, cpu_online_mask);
-+	for_each_cpu(cpu, &offline_cpus)
-+		qman_offline_cpu(cpu);
-+#ifdef CONFIG_HOTPLUG_CPU
-+	ret = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
-+					"soc/qman_portal:online",
-+					qman_online_cpu, qman_offline_cpu);
-+	if (ret < 0) {
-+		pr_err("qman: failed to register hotplug callbacks.\n");
-+		return ret;
-+	}
-+#endif
-+	return 0;
-+}
-+
-+__init int qman_resource_init(void)
-+{
-+	struct device_node *dn;
-+	int ret;
-+
-+	/* Initialise FQID allocation ranges */
-+	for_each_compatible_node(dn, NULL, "fsl,fqid-range") {
-+		ret = fsl_fqid_range_init(dn);
-+		if (ret)
-+			return ret;
-+	}
-+	/* Initialise CGRID allocation ranges */
-+	for_each_compatible_node(dn, NULL, "fsl,cgrid-range") {
-+		ret = fsl_cgrid_range_init(dn);
-+		if (ret)
-+			return ret;
-+	}
-+	/* Parse pool channels into the allocator. (Must happen after portals
-+	 * are initialised.) */
-+	for_each_compatible_node(dn, NULL, "fsl,pool-channel-range") {
-+		ret = fsl_pool_channel_range_init(dn);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	/* Parse CEETM */
-+	for_each_compatible_node(dn, NULL, "fsl,qman-ceetm") {
-+		ret = fsl_ceetm_init(dn);
-+		if (ret)
-+			return ret;
-+	}
-+	return 0;
-+}
-+
-+#ifdef CONFIG_SUSPEND
-+void suspend_unused_qportal(void)
-+{
-+	struct qm_portal_config *pcfg;
-+
-+	if (list_empty(&unused_pcfgs))
-+		return;
-+
-+	list_for_each_entry(pcfg, &unused_pcfgs, list) {
-+#ifdef CONFIG_PM_DEBUG
-+		pr_info("Need to save qportal %d\n", pcfg->public_cfg.index);
-+#endif
-+		/* save isdr, disable all via isdr, clear isr */
-+		pcfg->saved_isdr =
-+			__raw_readl(pcfg->addr_virt[DPA_PORTAL_CI] + 0xe08);
-+		__raw_writel(0xffffffff, pcfg->addr_virt[DPA_PORTAL_CI] +
-+					0xe08);
-+		__raw_writel(0xffffffff, pcfg->addr_virt[DPA_PORTAL_CI] +
-+					0xe00);
-+	}
-+	return;
-+}
-+
-+void resume_unused_qportal(void)
-+{
-+	struct qm_portal_config *pcfg;
-+
-+	if (list_empty(&unused_pcfgs))
-+		return;
-+
-+	list_for_each_entry(pcfg, &unused_pcfgs, list) {
-+#ifdef CONFIG_PM_DEBUG
-+		pr_info("Need to resume qportal %d\n", pcfg->public_cfg.index);
-+#endif
-+		/* restore isdr */
-+		__raw_writel(pcfg->saved_isdr,
-+				pcfg->addr_virt[DPA_PORTAL_CI] + 0xe08);
-+	}
-+	return;
-+}
-+#endif
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/qman_high.c
-@@ -0,0 +1,5669 @@
-+/* Copyright 2008-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "qman_low.h"
-+
-+/* Compilation constants */
-+#define DQRR_MAXFILL	15
-+#define EQCR_ITHRESH	4	/* if EQCR congests, interrupt threshold */
-+#define IRQNAME		"QMan portal %d"
-+#define MAX_IRQNAME	16	/* big enough for "QMan portal %d" */
-+
-+/* Divide 'n' by 'd', rounding down if 'r' is negative, rounding up if it's
-+ * positive, and rounding to the closest value if it's zero. NB, this macro
-+ * implicitly upgrades parameters to unsigned 64-bit, so feed it with types
-+ * that are compatible with this. NB, these arguments should not be expressions
-+ * unless it is safe for them to be evaluated multiple times. Eg. do not pass
-+ * in "some_value++" as a parameter to the macro! */
-+#define ROUNDING(n, d, r) \
-+	(((r) < 0) ? div64_u64((n), (d)) : \
-+	(((r) > 0) ? div64_u64(((n) + (d) - 1), (d)) : \
-+	div64_u64(((n) + ((d) / 2)), (d))))
-+
-+/* Lock/unlock frame queues, subject to the "LOCKED" flag. This is about
-+ * inter-processor locking only. Note, FQLOCK() is always called either under a
-+ * local_irq_save() or from interrupt context - hence there's no need for irq
-+ * protection (and indeed, attempting to nest irq-protection doesn't work, as
-+ * the "irq en/disable" machinery isn't recursive...). */
-+#define FQLOCK(fq) \
-+	do { \
-+		struct qman_fq *__fq478 = (fq); \
-+		if (fq_isset(__fq478, QMAN_FQ_FLAG_LOCKED)) \
-+			spin_lock(&__fq478->fqlock); \
-+	} while (0)
-+#define FQUNLOCK(fq) \
-+	do { \
-+		struct qman_fq *__fq478 = (fq); \
-+		if (fq_isset(__fq478, QMAN_FQ_FLAG_LOCKED)) \
-+			spin_unlock(&__fq478->fqlock); \
-+	} while (0)
-+
-+static inline void fq_set(struct qman_fq *fq, u32 mask)
-+{
-+	set_bits(mask, &fq->flags);
-+}
-+static inline void fq_clear(struct qman_fq *fq, u32 mask)
-+{
-+	clear_bits(mask, &fq->flags);
-+}
-+static inline int fq_isset(struct qman_fq *fq, u32 mask)
-+{
-+	return fq->flags & mask;
-+}
-+static inline int fq_isclear(struct qman_fq *fq, u32 mask)
-+{
-+	return !(fq->flags & mask);
-+}
-+
-+struct qman_portal {
-+	struct qm_portal p;
-+	unsigned long bits; /* PORTAL_BITS_*** - dynamic, strictly internal */
-+	unsigned long irq_sources;
-+	u32 use_eqcr_ci_stashing;
-+	u32 slowpoll;	/* only used when interrupts are off */
-+	struct qman_fq *vdqcr_owned; /* only 1 volatile dequeue at a time */
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	struct qman_fq *eqci_owned; /* only 1 enqueue WAIT_SYNC at a time */
-+#endif
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	raw_spinlock_t sharing_lock; /* only used if is_shared */
-+	int is_shared;
-+	struct qman_portal *sharing_redirect;
-+#endif
-+	u32 sdqcr;
-+	int dqrr_disable_ref;
-+	/* A portal-specific handler for DCP ERNs. If this is NULL, the global
-+	 * handler is called instead. */
-+	qman_cb_dc_ern cb_dc_ern;
-+	/* When the cpu-affine portal is activated, this is non-NULL */
-+	const struct qm_portal_config *config;
-+	/* This is needed for providing a non-NULL device to dma_map_***() */
-+	struct platform_device *pdev;
-+	struct dpa_rbtree retire_table;
-+	char irqname[MAX_IRQNAME];
-+	/* 2-element array. cgrs[0] is mask, cgrs[1] is snapshot. */
-+	struct qman_cgrs *cgrs;
-+	/* linked-list of CSCN handlers. */
-+	struct list_head cgr_cbs;
-+	/* list lock */
-+	spinlock_t cgr_lock;
-+	/* 2-element array. ccgrs[0] is mask, ccgrs[1] is snapshot. */
-+	struct qman_ccgrs *ccgrs[QMAN_CEETM_MAX];
-+	/* 256-element array, each is a linked-list of CCSCN handlers. */
-+	struct list_head ccgr_cbs[QMAN_CEETM_MAX];
-+	/* list lock */
-+	spinlock_t ccgr_lock;
-+	/* track if memory was allocated by the driver */
-+	u8 alloced;
-+	/* power management data */
-+	u32 save_isdr;
-+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
-+	/* Keep a shadow copy of the DQRR on LE systems as the SW needs to
-+	 * do byte swaps of DQRR read only memory.  First entry must be aligned
-+	 * to 2 ** 10 to ensure DQRR index calculations based shadow copy
-+	 * address (6 bits for address shift + 4 bits for the DQRR size).
-+	 */
-+	struct qm_dqrr_entry shadow_dqrr[QM_DQRR_SIZE] __aligned(1024);
-+#endif
-+};
-+
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+#define PORTAL_IRQ_LOCK(p, irqflags) \
-+	do { \
-+		if ((p)->is_shared) \
-+			raw_spin_lock_irqsave(&(p)->sharing_lock, irqflags); \
-+		else \
-+			local_irq_save(irqflags); \
-+	} while (0)
-+#define PORTAL_IRQ_UNLOCK(p, irqflags) \
-+	do { \
-+		if ((p)->is_shared) \
-+			raw_spin_unlock_irqrestore(&(p)->sharing_lock, \
-+						   irqflags); \
-+		else \
-+			local_irq_restore(irqflags); \
-+	} while (0)
-+#else
-+#define PORTAL_IRQ_LOCK(p, irqflags) local_irq_save(irqflags)
-+#define PORTAL_IRQ_UNLOCK(p, irqflags) local_irq_restore(irqflags)
-+#endif
-+
-+/* Global handler for DCP ERNs. Used when the portal receiving the message does
-+ * not have a portal-specific handler. */
-+static qman_cb_dc_ern cb_dc_ern;
-+
-+static cpumask_t affine_mask;
-+static DEFINE_SPINLOCK(affine_mask_lock);
-+static u16 affine_channels[NR_CPUS];
-+static DEFINE_PER_CPU(struct qman_portal, qman_affine_portal);
-+void *affine_portals[NR_CPUS];
-+
-+/* "raw" gets the cpu-local struct whether it's a redirect or not. */
-+static inline struct qman_portal *get_raw_affine_portal(void)
-+{
-+	return &get_cpu_var(qman_affine_portal);
-+}
-+/* For ops that can redirect, this obtains the portal to use */
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+static inline struct qman_portal *get_affine_portal(void)
-+{
-+	struct qman_portal *p = get_raw_affine_portal();
-+	if (p->sharing_redirect)
-+		return p->sharing_redirect;
-+	return p;
-+}
-+#else
-+#define get_affine_portal() get_raw_affine_portal()
-+#endif
-+/* For every "get", there must be a "put" */
-+static inline void put_affine_portal(void)
-+{
-+	put_cpu_var(qman_affine_portal);
-+}
-+/* Exception: poll functions assume the caller is cpu-affine and in no risk of
-+ * re-entrance, which are the two reasons we usually use the get/put_cpu_var()
-+ * semantic - ie. to disable pre-emption. Some use-cases expect the execution
-+ * context to remain as non-atomic during poll-triggered callbacks as it was
-+ * when the poll API was first called (eg. NAPI), so we go out of our way in
-+ * this case to not disable pre-emption. */
-+static inline struct qman_portal *get_poll_portal(void)
-+{
-+	return &get_cpu_var(qman_affine_portal);
-+}
-+#define put_poll_portal()
-+
-+/* This gives a FQID->FQ lookup to cover the fact that we can't directly demux
-+ * retirement notifications (the fact they are sometimes h/w-consumed means that
-+ * contextB isn't always a s/w demux - and as we can't know which case it is
-+ * when looking at the notification, we have to use the slow lookup for all of
-+ * them). NB, it's possible to have multiple FQ objects refer to the same FQID
-+ * (though at most one of them should be the consumer), so this table isn't for
-+ * all FQs - FQs are added when retirement commands are issued, and removed when
-+ * they complete, which also massively reduces the size of this table. */
-+IMPLEMENT_DPA_RBTREE(fqtree, struct qman_fq, node, fqid);
-+
-+/* This is what everything can wait on, even if it migrates to a different cpu
-+ * to the one whose affine portal it is waiting on. */
-+static DECLARE_WAIT_QUEUE_HEAD(affine_queue);
-+
-+static inline int table_push_fq(struct qman_portal *p, struct qman_fq *fq)
-+{
-+	int ret = fqtree_push(&p->retire_table, fq);
-+	if (ret)
-+		pr_err("ERROR: double FQ-retirement %d\n", fq->fqid);
-+	return ret;
-+}
-+
-+static inline void table_del_fq(struct qman_portal *p, struct qman_fq *fq)
-+{
-+	fqtree_del(&p->retire_table, fq);
-+}
-+
-+static inline struct qman_fq *table_find_fq(struct qman_portal *p, u32 fqid)
-+{
-+	return fqtree_find(&p->retire_table, fqid);
-+}
-+
-+#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
-+static void **qman_fq_lookup_table;
-+static size_t qman_fq_lookup_table_size;
-+
-+int qman_setup_fq_lookup_table(size_t num_entries)
-+{
-+	num_entries++;
-+	/* Allocate 1 more entry since the first entry is not used */
-+	qman_fq_lookup_table = vzalloc((num_entries * sizeof(void *)));
-+	if (!qman_fq_lookup_table) {
-+		pr_err("QMan: Could not allocate fq lookup table\n");
-+		return -ENOMEM;
-+	}
-+	qman_fq_lookup_table_size = num_entries;
-+	pr_info("QMan: Allocated lookup table at %p, entry count %lu\n",
-+			qman_fq_lookup_table,
-+			(unsigned long)qman_fq_lookup_table_size);
-+	return 0;
-+}
-+
-+/* global structure that maintains fq object mapping */
-+static DEFINE_SPINLOCK(fq_hash_table_lock);
-+
-+static int find_empty_fq_table_entry(u32 *entry, struct qman_fq *fq)
-+{
-+	u32 i;
-+
-+	spin_lock(&fq_hash_table_lock);
-+	/* Can't use index zero because this has special meaning
-+	 * in context_b field. */
-+	for (i = 1; i < qman_fq_lookup_table_size; i++) {
-+		if (qman_fq_lookup_table[i] == NULL) {
-+			*entry = i;
-+			qman_fq_lookup_table[i] = fq;
-+			spin_unlock(&fq_hash_table_lock);
-+			return 0;
-+		}
-+	}
-+	spin_unlock(&fq_hash_table_lock);
-+	return -ENOMEM;
-+}
-+
-+static void clear_fq_table_entry(u32 entry)
-+{
-+	spin_lock(&fq_hash_table_lock);
-+	BUG_ON(entry >= qman_fq_lookup_table_size);
-+	qman_fq_lookup_table[entry] = NULL;
-+	spin_unlock(&fq_hash_table_lock);
-+}
-+
-+static inline struct qman_fq *get_fq_table_entry(u32 entry)
-+{
-+	BUG_ON(entry >= qman_fq_lookup_table_size);
-+	return qman_fq_lookup_table[entry];
-+}
-+#endif
-+
-+static inline void cpu_to_hw_fqd(struct qm_fqd *fqd)
-+{
-+	/* Byteswap the FQD to HW format */
-+	fqd->fq_ctrl = cpu_to_be16(fqd->fq_ctrl);
-+	fqd->dest_wq = cpu_to_be16(fqd->dest_wq);
-+	fqd->ics_cred = cpu_to_be16(fqd->ics_cred);
-+	fqd->context_b = cpu_to_be32(fqd->context_b);
-+	fqd->context_a.opaque = cpu_to_be64(fqd->context_a.opaque);
-+}
-+
-+static inline void hw_fqd_to_cpu(struct qm_fqd *fqd)
-+{
-+	/* Byteswap the FQD to CPU format */
-+	fqd->fq_ctrl = be16_to_cpu(fqd->fq_ctrl);
-+	fqd->dest_wq = be16_to_cpu(fqd->dest_wq);
-+	fqd->ics_cred = be16_to_cpu(fqd->ics_cred);
-+	fqd->context_b = be32_to_cpu(fqd->context_b);
-+	fqd->context_a.opaque = be64_to_cpu(fqd->context_a.opaque);
-+}
-+
-+/* Swap a 40 bit address */
-+static inline u64 cpu_to_be40(u64 in)
-+{
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+	return in;
-+#else
-+	u64 out = 0;
-+	u8 *p = (u8 *) &out;
-+	p[0] = in >> 32;
-+	p[1] = in >> 24;
-+	p[2] = in >> 16;
-+	p[3] = in >> 8;
-+	p[4] = in >> 0;
-+	return out;
-+#endif
-+}
-+static inline u64 be40_to_cpu(u64 in)
-+{
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+	return in;
-+#else
-+	u64 out = 0;
-+	u8 *pout = (u8 *) &out;
-+	u8 *pin = (u8 *) &in;
-+	pout[0] = pin[4];
-+	pout[1] = pin[3];
-+	pout[2] = pin[2];
-+	pout[3] = pin[1];
-+	pout[4] = pin[0];
-+	return out;
-+#endif
-+}
-+
-+/* Swap a 24 bit value */
-+static inline u32 cpu_to_be24(u32 in)
-+{
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+	return in;
-+#else
-+	u32 out = 0;
-+	u8 *p = (u8 *) &out;
-+	p[0] = in >> 16;
-+	p[1] = in >> 8;
-+	p[2] = in >> 0;
-+	return out;
-+#endif
-+}
-+
-+static inline u32 be24_to_cpu(u32 in)
-+{
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+	return in;
-+#else
-+	u32 out = 0;
-+	u8 *pout = (u8 *) &out;
-+	u8 *pin = (u8 *) &in;
-+	pout[0] = pin[2];
-+	pout[1] = pin[1];
-+	pout[2] = pin[0];
-+	return out;
-+#endif
-+}
-+
-+static inline u64 be48_to_cpu(u64 in)
-+{
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+	return in;
-+#else
-+	u64 out = 0;
-+	u8 *pout = (u8 *) &out;
-+	u8 *pin = (u8 *) &in;
-+
-+	pout[0] = pin[5];
-+	pout[1] = pin[4];
-+	pout[2] = pin[3];
-+	pout[3] = pin[2];
-+	pout[4] = pin[1];
-+	pout[5] = pin[0];
-+	return out;
-+#endif
-+}
-+static inline void cpu_to_hw_fd(struct qm_fd *fd)
-+{
-+	fd->opaque_addr = cpu_to_be64(fd->opaque_addr);
-+	fd->status = cpu_to_be32(fd->status);
-+	fd->opaque = cpu_to_be32(fd->opaque);
-+}
-+
-+static inline void hw_fd_to_cpu(struct qm_fd *fd)
-+{
-+	fd->opaque_addr = be64_to_cpu(fd->opaque_addr);
-+	fd->status = be32_to_cpu(fd->status);
-+	fd->opaque = be32_to_cpu(fd->opaque);
-+}
-+
-+static inline void hw_cq_query_to_cpu(struct qm_mcr_ceetm_cq_query *cq_query)
-+{
-+	cq_query->ccgid = be16_to_cpu(cq_query->ccgid);
-+	cq_query->state = be16_to_cpu(cq_query->state);
-+	cq_query->pfdr_hptr = be24_to_cpu(cq_query->pfdr_hptr);
-+	cq_query->pfdr_tptr = be24_to_cpu(cq_query->pfdr_tptr);
-+	cq_query->od1_xsfdr = be16_to_cpu(cq_query->od1_xsfdr);
-+	cq_query->od2_xsfdr = be16_to_cpu(cq_query->od2_xsfdr);
-+	cq_query->od3_xsfdr = be16_to_cpu(cq_query->od3_xsfdr);
-+	cq_query->od4_xsfdr = be16_to_cpu(cq_query->od4_xsfdr);
-+	cq_query->od5_xsfdr = be16_to_cpu(cq_query->od5_xsfdr);
-+	cq_query->od6_xsfdr = be16_to_cpu(cq_query->od6_xsfdr);
-+	cq_query->ra1_xsfdr = be16_to_cpu(cq_query->ra1_xsfdr);
-+	cq_query->ra2_xsfdr = be16_to_cpu(cq_query->ra2_xsfdr);
-+	cq_query->frm_cnt = be24_to_cpu(cq_query->frm_cnt);
-+}
-+
-+static inline void hw_ccgr_query_to_cpu(struct qm_mcr_ceetm_ccgr_query *ccgr_q)
-+{
-+	int i;
-+
-+	ccgr_q->cm_query.cs_thres.hword =
-+		be16_to_cpu(ccgr_q->cm_query.cs_thres.hword);
-+	ccgr_q->cm_query.cs_thres_x.hword =
-+		be16_to_cpu(ccgr_q->cm_query.cs_thres_x.hword);
-+	ccgr_q->cm_query.td_thres.hword =
-+		be16_to_cpu(ccgr_q->cm_query.td_thres.hword);
-+	ccgr_q->cm_query.wr_parm_g.word =
-+	       be32_to_cpu(ccgr_q->cm_query.wr_parm_g.word);
-+	ccgr_q->cm_query.wr_parm_y.word =
-+		be32_to_cpu(ccgr_q->cm_query.wr_parm_y.word);
-+	ccgr_q->cm_query.wr_parm_r.word =
-+		be32_to_cpu(ccgr_q->cm_query.wr_parm_r.word);
-+	ccgr_q->cm_query.cscn_targ_dcp =
-+		be16_to_cpu(ccgr_q->cm_query.cscn_targ_dcp);
-+	ccgr_q->cm_query.i_cnt = be40_to_cpu(ccgr_q->cm_query.i_cnt);
-+	ccgr_q->cm_query.a_cnt = be40_to_cpu(ccgr_q->cm_query.a_cnt);
-+	for (i = 0; i < ARRAY_SIZE(ccgr_q->cm_query.cscn_targ_swp); i++)
-+		ccgr_q->cm_query.cscn_targ_swp[i] =
-+			be32_to_cpu(ccgr_q->cm_query.cscn_targ_swp[i]);
-+}
-+
-+/* In the case that slow- and fast-path handling are both done by qman_poll()
-+ * (ie. because there is no interrupt handling), we ought to balance how often
-+ * we do the fast-path poll versus the slow-path poll. We'll use two decrementer
-+ * sources, so we call the fast poll 'n' times before calling the slow poll
-+ * once. The idle decrementer constant is used when the last slow-poll detected
-+ * no work to do, and the busy decrementer constant when the last slow-poll had
-+ * work to do. */
-+#define SLOW_POLL_IDLE   1000
-+#define SLOW_POLL_BUSY   10
-+static u32 __poll_portal_slow(struct qman_portal *p, u32 is);
-+static inline unsigned int __poll_portal_fast(struct qman_portal *p,
-+					unsigned int poll_limit);
-+
-+/* Portal interrupt handler */
-+static irqreturn_t portal_isr(__always_unused int irq, void *ptr)
-+{
-+	struct qman_portal *p = ptr;
-+	/*
-+	 * The CSCI/CCSCI source is cleared inside __poll_portal_slow(), because
-+	 * it could race against a Query Congestion State command also given
-+	 * as part of the handling of this interrupt source. We mustn't
-+	 * clear it a second time in this top-level function.
-+	 */
-+	u32 clear = QM_DQAVAIL_MASK | (p->irq_sources &
-+		~(QM_PIRQ_CSCI | QM_PIRQ_CCSCI));
-+	u32 is = qm_isr_status_read(&p->p) & p->irq_sources;
-+	/* DQRR-handling if it's interrupt-driven */
-+	if (is & QM_PIRQ_DQRI)
-+		__poll_portal_fast(p, CONFIG_FSL_QMAN_POLL_LIMIT);
-+	/* Handling of anything else that's interrupt-driven */
-+	clear |= __poll_portal_slow(p, is);
-+	qm_isr_status_clear(&p->p, clear);
-+	return IRQ_HANDLED;
-+}
-+
-+/* This inner version is used privately by qman_create_affine_portal(), as well
-+ * as by the exported qman_stop_dequeues(). */
-+static inline void qman_stop_dequeues_ex(struct qman_portal *p)
-+{
-+	unsigned long irqflags __maybe_unused;
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	if (!(p->dqrr_disable_ref++))
-+		qm_dqrr_set_maxfill(&p->p, 0);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+}
-+
-+static int drain_mr_fqrni(struct qm_portal *p)
-+{
-+	const struct qm_mr_entry *msg;
-+loop:
-+	msg = qm_mr_current(p);
-+	if (!msg) {
-+		/* if MR was full and h/w had other FQRNI entries to produce, we
-+		 * need to allow it time to produce those entries once the
-+		 * existing entries are consumed. A worst-case situation
-+		 * (fully-loaded system) means h/w sequencers may have to do 3-4
-+		 * other things before servicing the portal's MR pump, each of
-+		 * which (if slow) may take ~50 qman cycles (which is ~200
-+		 * processor cycles). So rounding up and then multiplying this
-+		 * worst-case estimate by a factor of 10, just to be
-+		 * ultra-paranoid, goes as high as 10,000 cycles. NB, we consume
-+		 * one entry at a time, so h/w has an opportunity to produce new
-+		 * entries well before the ring has been fully consumed, so
-+		 * we're being *really* paranoid here. */
-+		u64 now, then = mfatb();
-+		do {
-+			now = mfatb();
-+		} while ((then + 10000) > now);
-+		msg = qm_mr_current(p);
-+		if (!msg)
-+			return 0;
-+	}
-+	if ((msg->verb & QM_MR_VERB_TYPE_MASK) != QM_MR_VERB_FQRNI) {
-+		/* We aren't draining anything but FQRNIs */
-+		pr_err("QMan found verb 0x%x in MR\n", msg->verb);
-+		return -1;
-+	}
-+	qm_mr_next(p);
-+	qm_mr_cci_consume(p, 1);
-+	goto loop;
-+}
-+
-+#ifdef CONFIG_SUSPEND
-+static int _qman_portal_suspend_noirq(struct device *dev)
-+{
-+	struct qman_portal *p = (struct qman_portal *)dev->platform_data;
-+#ifdef CONFIG_PM_DEBUG
-+	struct platform_device *pdev = to_platform_device(dev);
-+#endif
-+
-+	p->save_isdr = qm_isr_disable_read(&p->p);
-+	qm_isr_disable_write(&p->p, 0xffffffff);
-+	qm_isr_status_clear(&p->p, 0xffffffff);
-+#ifdef CONFIG_PM_DEBUG
-+	pr_info("Suspend for %s\n", pdev->name);
-+#endif
-+	return 0;
-+}
-+
-+static int _qman_portal_resume_noirq(struct device *dev)
-+{
-+	struct qman_portal *p = (struct qman_portal *)dev->platform_data;
-+
-+	/* restore isdr */
-+	qm_isr_disable_write(&p->p, p->save_isdr);
-+	return 0;
-+}
-+#else
-+#define _qman_portal_suspend_noirq NULL
-+#define _qman_portal_resume_noirq NULL
-+#endif
-+
-+struct dev_pm_domain qman_portal_device_pm_domain = {
-+	.ops = {
-+		USE_PLATFORM_PM_SLEEP_OPS
-+		.suspend_noirq = _qman_portal_suspend_noirq,
-+		.resume_noirq = _qman_portal_resume_noirq,
-+	}
-+};
-+
-+struct qman_portal *qman_create_portal(
-+			struct qman_portal *portal,
-+			const struct qm_portal_config *config,
-+			const struct qman_cgrs *cgrs)
-+{
-+	struct qm_portal *__p;
-+	char buf[16];
-+	int ret;
-+	u32 isdr;
-+
-+	if (!portal) {
-+		portal = kmalloc(sizeof(*portal), GFP_KERNEL);
-+		if (!portal)
-+			return portal;
-+		portal->alloced = 1;
-+	} else
-+		portal->alloced = 0;
-+
-+	__p = &portal->p;
-+
-+#if (defined CONFIG_PPC || defined CONFIG_PPC64) && defined CONFIG_FSL_PAMU
-+        /* PAMU is required for stashing */
-+        portal->use_eqcr_ci_stashing = ((qman_ip_rev >= QMAN_REV30) ?
-+					1 : 0);
-+#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+	portal->use_eqcr_ci_stashing = 1;
-+#else
-+        portal->use_eqcr_ci_stashing = 0;
-+#endif
-+
-+	/* prep the low-level portal struct with the mapped addresses from the
-+	 * config, everything that follows depends on it and "config" is more
-+	 * for (de)reference... */
-+	__p->addr.addr_ce = config->addr_virt[DPA_PORTAL_CE];
-+	__p->addr.addr_ci = config->addr_virt[DPA_PORTAL_CI];
-+	/*
-+	 * If CI-stashing is used, the current defaults use a threshold of 3,
-+	 * and stash with high-than-DQRR priority.
-+	 */
-+	if (qm_eqcr_init(__p, qm_eqcr_pvb,
-+			portal->use_eqcr_ci_stashing ? 3 : 0, 1)) {
-+		pr_err("Qman EQCR initialisation failed\n");
-+		goto fail_eqcr;
-+	}
-+	if (qm_dqrr_init(__p, config, qm_dqrr_dpush, qm_dqrr_pvb,
-+			qm_dqrr_cdc, DQRR_MAXFILL)) {
-+		pr_err("Qman DQRR initialisation failed\n");
-+		goto fail_dqrr;
-+	}
-+	if (qm_mr_init(__p, qm_mr_pvb, qm_mr_cci)) {
-+		pr_err("Qman MR initialisation failed\n");
-+		goto fail_mr;
-+	}
-+	if (qm_mc_init(__p)) {
-+		pr_err("Qman MC initialisation failed\n");
-+		goto fail_mc;
-+	}
-+	if (qm_isr_init(__p)) {
-+		pr_err("Qman ISR initialisation failed\n");
-+		goto fail_isr;
-+	}
-+	/* static interrupt-gating controls */
-+	qm_dqrr_set_ithresh(__p, CONFIG_FSL_QMAN_PIRQ_DQRR_ITHRESH);
-+	qm_mr_set_ithresh(__p, CONFIG_FSL_QMAN_PIRQ_MR_ITHRESH);
-+	qm_isr_set_iperiod(__p, CONFIG_FSL_QMAN_PIRQ_IPERIOD);
-+	portal->cgrs = kmalloc(2 * sizeof(*cgrs), GFP_KERNEL);
-+	if (!portal->cgrs)
-+		goto fail_cgrs;
-+	/* initial snapshot is no-depletion */
-+	qman_cgrs_init(&portal->cgrs[1]);
-+	if (cgrs)
-+		portal->cgrs[0] = *cgrs;
-+	else
-+		/* if the given mask is NULL, assume all CGRs can be seen */
-+		qman_cgrs_fill(&portal->cgrs[0]);
-+	INIT_LIST_HEAD(&portal->cgr_cbs);
-+	spin_lock_init(&portal->cgr_lock);
-+	if (num_ceetms) {
-+		for (ret = 0; ret < num_ceetms; ret++) {
-+			portal->ccgrs[ret] = kmalloc(2 *
-+				sizeof(struct qman_ccgrs), GFP_KERNEL);
-+			if (!portal->ccgrs[ret])
-+				goto fail_ccgrs;
-+			qman_ccgrs_init(&portal->ccgrs[ret][1]);
-+			qman_ccgrs_fill(&portal->ccgrs[ret][0]);
-+			INIT_LIST_HEAD(&portal->ccgr_cbs[ret]);
-+		}
-+	}
-+	spin_lock_init(&portal->ccgr_lock);
-+	portal->bits = 0;
-+	portal->slowpoll = 0;
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	portal->eqci_owned = NULL;
-+#endif
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	raw_spin_lock_init(&portal->sharing_lock);
-+	portal->is_shared = config->public_cfg.is_shared;
-+	portal->sharing_redirect = NULL;
-+#endif
-+	portal->sdqcr = QM_SDQCR_SOURCE_CHANNELS | QM_SDQCR_COUNT_UPTO3 |
-+			QM_SDQCR_DEDICATED_PRECEDENCE | QM_SDQCR_TYPE_PRIO_QOS |
-+			QM_SDQCR_TOKEN_SET(0xab) | QM_SDQCR_CHANNELS_DEDICATED;
-+	portal->dqrr_disable_ref = 0;
-+	portal->cb_dc_ern = NULL;
-+	sprintf(buf, "qportal-%d", config->public_cfg.channel);
-+	portal->pdev = platform_device_alloc(buf, -1);
-+	if (!portal->pdev) {
-+		pr_err("qman_portal - platform_device_alloc() failed\n");
-+		goto fail_devalloc;
-+	}
-+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+	portal->pdev->dev.coherent_dma_mask = DMA_BIT_MASK(40);
-+	portal->pdev->dev.dma_mask = &portal->pdev->dev.coherent_dma_mask;
-+#else
-+	if (dma_set_mask(&portal->pdev->dev, DMA_BIT_MASK(40))) {
-+		pr_err("qman_portal - dma_set_mask() failed\n");
-+		goto fail_devadd;
-+	}
-+#endif
-+	portal->pdev->dev.pm_domain = &qman_portal_device_pm_domain;
-+	portal->pdev->dev.platform_data = portal;
-+	ret = platform_device_add(portal->pdev);
-+	if (ret) {
-+		pr_err("qman_portal - platform_device_add() failed\n");
-+		goto fail_devadd;
-+	}
-+	dpa_rbtree_init(&portal->retire_table);
-+	isdr = 0xffffffff;
-+	qm_isr_disable_write(__p, isdr);
-+	portal->irq_sources = 0;
-+	qm_isr_enable_write(__p, portal->irq_sources);
-+	qm_isr_status_clear(__p, 0xffffffff);
-+	snprintf(portal->irqname, MAX_IRQNAME, IRQNAME, config->public_cfg.cpu);
-+	if (request_irq(config->public_cfg.irq, portal_isr, 0, portal->irqname,
-+				portal)) {
-+		pr_err("request_irq() failed\n");
-+		goto fail_irq;
-+	}
-+	if ((config->public_cfg.cpu != -1) &&
-+			irq_can_set_affinity(config->public_cfg.irq) &&
-+			irq_set_affinity(config->public_cfg.irq,
-+				cpumask_of(config->public_cfg.cpu))) {
-+		pr_err("irq_set_affinity() failed\n");
-+		goto fail_affinity;
-+	}
-+
-+	/* Need EQCR to be empty before continuing */
-+	isdr ^= QM_PIRQ_EQCI;
-+	qm_isr_disable_write(__p, isdr);
-+	ret = qm_eqcr_get_fill(__p);
-+	if (ret) {
-+		pr_err("Qman EQCR unclean\n");
-+		goto fail_eqcr_empty;
-+	}
-+	isdr ^= (QM_PIRQ_DQRI | QM_PIRQ_MRI);
-+	qm_isr_disable_write(__p, isdr);
-+	if (qm_dqrr_current(__p) != NULL) {
-+		pr_err("Qman DQRR unclean\n");
-+		qm_dqrr_cdc_consume_n(__p, 0xffff);
-+	}
-+	if (qm_mr_current(__p) != NULL) {
-+		/* special handling, drain just in case it's a few FQRNIs */
-+		if (drain_mr_fqrni(__p)) {
-+			const struct qm_mr_entry *e = qm_mr_current(__p);
-+			/*
-+			 * Message ring cannot be empty no need to check
-+			 * qm_mr_current returned successfully
-+			 */
-+			pr_err("Qman MR unclean, MR VERB 0x%x, rc 0x%x\n, addr 0x%x",
-+				e->verb, e->ern.rc, e->ern.fd.addr_lo);
-+			goto fail_dqrr_mr_empty;
-+		}
-+	}
-+	/* Success */
-+	portal->config = config;
-+	qm_isr_disable_write(__p, 0);
-+	qm_isr_uninhibit(__p);
-+	/* Write a sane SDQCR */
-+	qm_dqrr_sdqcr_set(__p, portal->sdqcr);
-+	return portal;
-+fail_dqrr_mr_empty:
-+fail_eqcr_empty:
-+fail_affinity:
-+	free_irq(config->public_cfg.irq, portal);
-+fail_irq:
-+	platform_device_del(portal->pdev);
-+fail_devadd:
-+	platform_device_put(portal->pdev);
-+fail_devalloc:
-+	if (num_ceetms)
-+		for (ret = 0; ret < num_ceetms; ret++)
-+			kfree(portal->ccgrs[ret]);
-+fail_ccgrs:
-+	kfree(portal->cgrs);
-+fail_cgrs:
-+	qm_isr_finish(__p);
-+fail_isr:
-+	qm_mc_finish(__p);
-+fail_mc:
-+	qm_mr_finish(__p);
-+fail_mr:
-+	qm_dqrr_finish(__p);
-+fail_dqrr:
-+	qm_eqcr_finish(__p);
-+fail_eqcr:
-+	if (portal->alloced)
-+		kfree(portal);
-+	return NULL;
-+}
-+
-+struct qman_portal *qman_create_affine_portal(
-+			const struct qm_portal_config *config,
-+			const struct qman_cgrs *cgrs)
-+{
-+	struct qman_portal *res;
-+	struct qman_portal *portal;
-+
-+	portal = &per_cpu(qman_affine_portal, config->public_cfg.cpu);
-+	res = qman_create_portal(portal, config, cgrs);
-+	if (res) {
-+		spin_lock(&affine_mask_lock);
-+		cpumask_set_cpu(config->public_cfg.cpu, &affine_mask);
-+		affine_channels[config->public_cfg.cpu] =
-+			config->public_cfg.channel;
-+		affine_portals[config->public_cfg.cpu] = portal;
-+		spin_unlock(&affine_mask_lock);
-+	}
-+	return res;
-+}
-+
-+/* These checks are BUG_ON()s because the driver is already supposed to avoid
-+ * these cases. */
-+struct qman_portal *qman_create_affine_slave(struct qman_portal *redirect,
-+								int cpu)
-+{
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	struct qman_portal *p;
-+	p = &per_cpu(qman_affine_portal, cpu);
-+	/* Check that we don't already have our own portal */
-+	BUG_ON(p->config);
-+	/* Check that we aren't already slaving to another portal */
-+	BUG_ON(p->is_shared);
-+	/* Check that 'redirect' is prepared to have us */
-+	BUG_ON(!redirect->config->public_cfg.is_shared);
-+	/* These are the only elements to initialise when redirecting */
-+	p->irq_sources = 0;
-+	p->sharing_redirect = redirect;
-+	affine_portals[cpu] = p;
-+	return p;
-+#else
-+	BUG();
-+	return NULL;
-+#endif
-+}
-+
-+void qman_destroy_portal(struct qman_portal *qm)
-+{
-+	const struct qm_portal_config *pcfg;
-+	int i;
-+
-+	/* Stop dequeues on the portal */
-+	qm_dqrr_sdqcr_set(&qm->p, 0);
-+
-+	/* NB we do this to "quiesce" EQCR. If we add enqueue-completions or
-+	 * something related to QM_PIRQ_EQCI, this may need fixing.
-+	 * Also, due to the prefetching model used for CI updates in the enqueue
-+	 * path, this update will only invalidate the CI cacheline *after*
-+	 * working on it, so we need to call this twice to ensure a full update
-+	 * irrespective of where the enqueue processing was at when the teardown
-+	 * began. */
-+	qm_eqcr_cce_update(&qm->p);
-+	qm_eqcr_cce_update(&qm->p);
-+	pcfg = qm->config;
-+
-+	free_irq(pcfg->public_cfg.irq, qm);
-+
-+	kfree(qm->cgrs);
-+	if (num_ceetms)
-+		for (i = 0; i < num_ceetms; i++)
-+			kfree(qm->ccgrs[i]);
-+	qm_isr_finish(&qm->p);
-+	qm_mc_finish(&qm->p);
-+	qm_mr_finish(&qm->p);
-+	qm_dqrr_finish(&qm->p);
-+	qm_eqcr_finish(&qm->p);
-+
-+	platform_device_del(qm->pdev);
-+	platform_device_put(qm->pdev);
-+
-+	qm->config = NULL;
-+	if (qm->alloced)
-+		kfree(qm);
-+}
-+
-+const struct qm_portal_config *qman_destroy_affine_portal(void)
-+{
-+	/* We don't want to redirect if we're a slave, use "raw" */
-+	struct qman_portal *qm = get_raw_affine_portal();
-+	const struct qm_portal_config *pcfg;
-+	int cpu;
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	if (qm->sharing_redirect) {
-+		qm->sharing_redirect = NULL;
-+		put_affine_portal();
-+		return NULL;
-+	}
-+	qm->is_shared = 0;
-+#endif
-+	pcfg = qm->config;
-+	cpu = pcfg->public_cfg.cpu;
-+
-+	qman_destroy_portal(qm);
-+
-+	spin_lock(&affine_mask_lock);
-+	cpumask_clear_cpu(cpu, &affine_mask);
-+	spin_unlock(&affine_mask_lock);
-+	put_affine_portal();
-+	return pcfg;
-+}
-+
-+const struct qman_portal_config *qman_p_get_portal_config(struct qman_portal *p)
-+{
-+	return &p->config->public_cfg;
-+}
-+EXPORT_SYMBOL(qman_p_get_portal_config);
-+
-+const struct qman_portal_config *qman_get_portal_config(void)
-+{
-+	struct qman_portal *p = get_affine_portal();
-+	const struct qman_portal_config *ret = qman_p_get_portal_config(p);
-+	put_affine_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_get_portal_config);
-+
-+/* Inline helper to reduce nesting in __poll_portal_slow() */
-+static inline void fq_state_change(struct qman_portal *p, struct qman_fq *fq,
-+				const struct qm_mr_entry *msg, u8 verb)
-+{
-+	FQLOCK(fq);
-+	switch (verb) {
-+	case QM_MR_VERB_FQRL:
-+		DPA_ASSERT(fq_isset(fq, QMAN_FQ_STATE_ORL));
-+		fq_clear(fq, QMAN_FQ_STATE_ORL);
-+		table_del_fq(p, fq);
-+		break;
-+	case QM_MR_VERB_FQRN:
-+		DPA_ASSERT((fq->state == qman_fq_state_parked) ||
-+			(fq->state == qman_fq_state_sched));
-+		DPA_ASSERT(fq_isset(fq, QMAN_FQ_STATE_CHANGING));
-+		fq_clear(fq, QMAN_FQ_STATE_CHANGING);
-+		if (msg->fq.fqs & QM_MR_FQS_NOTEMPTY)
-+			fq_set(fq, QMAN_FQ_STATE_NE);
-+		if (msg->fq.fqs & QM_MR_FQS_ORLPRESENT)
-+			fq_set(fq, QMAN_FQ_STATE_ORL);
-+		else
-+			table_del_fq(p, fq);
-+		fq->state = qman_fq_state_retired;
-+		break;
-+	case QM_MR_VERB_FQPN:
-+		DPA_ASSERT(fq->state == qman_fq_state_sched);
-+		DPA_ASSERT(fq_isclear(fq, QMAN_FQ_STATE_CHANGING));
-+		fq->state = qman_fq_state_parked;
-+	}
-+	FQUNLOCK(fq);
-+}
-+
-+static u32 __poll_portal_slow(struct qman_portal *p, u32 is)
-+{
-+	const struct qm_mr_entry *msg;
-+	struct qm_mr_entry swapped_msg;
-+	int k;
-+
-+	if (is & QM_PIRQ_CSCI) {
-+		struct qman_cgrs rr, c;
-+		struct qm_mc_result *mcr;
-+		struct qman_cgr *cgr;
-+		unsigned long irqflags __maybe_unused;
-+
-+		spin_lock_irqsave(&p->cgr_lock, irqflags);
-+		/*
-+		 * The CSCI bit must be cleared _before_ issuing the
-+		 * Query Congestion State command, to ensure that a long
-+		 * CGR State Change callback cannot miss an intervening
-+		 * state change.
-+		 */
-+		qm_isr_status_clear(&p->p, QM_PIRQ_CSCI);
-+		qm_mc_start(&p->p);
-+		qm_mc_commit(&p->p, QM_MCC_VERB_QUERYCONGESTION);
-+		while (!(mcr = qm_mc_result(&p->p)))
-+			cpu_relax();
-+		for (k = 0; k < 8; k++)
-+			mcr->querycongestion.state.__state[k] = be32_to_cpu(
-+					mcr->querycongestion.state.__state[k]);
-+		/* mask out the ones I'm not interested in */
-+		qman_cgrs_and(&rr, (const struct qman_cgrs *)
-+			&mcr->querycongestion.state, &p->cgrs[0]);
-+		/* check previous snapshot for delta, enter/exit congestion */
-+		qman_cgrs_xor(&c, &rr, &p->cgrs[1]);
-+		/* update snapshot */
-+		qman_cgrs_cp(&p->cgrs[1], &rr);
-+		/* Invoke callback */
-+		list_for_each_entry(cgr, &p->cgr_cbs, node)
-+			if (cgr->cb && qman_cgrs_get(&c, cgr->cgrid))
-+				cgr->cb(p, cgr, qman_cgrs_get(&rr, cgr->cgrid));
-+		spin_unlock_irqrestore(&p->cgr_lock, irqflags);
-+	}
-+	if (is & QM_PIRQ_CCSCI) {
-+		struct qman_ccgrs rr, c, congestion_result;
-+		struct qm_mc_result *mcr;
-+		struct qm_mc_command *mcc;
-+		struct qm_ceetm_ccg *ccg;
-+		unsigned long irqflags __maybe_unused;
-+		int i, j;
-+
-+		spin_lock_irqsave(&p->ccgr_lock, irqflags);
-+		/*
-+		 * The CCSCI bit must be cleared _before_ issuing the
-+		 * Query Congestion State command, to ensure that a long
-+		 * CCGR State Change callback cannot miss an intervening
-+		 * state change.
-+		 */
-+		qm_isr_status_clear(&p->p, QM_PIRQ_CCSCI);
-+
-+		for (i = 0; i < num_ceetms; i++) {
-+			for (j = 0; j < 2; j++) {
-+				mcc = qm_mc_start(&p->p);
-+				mcc->ccgr_query.ccgrid = cpu_to_be16(
-+					CEETM_QUERY_CONGESTION_STATE | j);
-+				mcc->ccgr_query.dcpid = i;
-+				qm_mc_commit(&p->p, QM_CEETM_VERB_CCGR_QUERY);
-+				while (!(mcr = qm_mc_result(&p->p)))
-+					cpu_relax();
-+				for (k = 0; k < 8; k++)
-+					mcr->ccgr_query.congestion_state.state.
-+						__state[k] = be32_to_cpu(
-+						mcr->ccgr_query.
-+						congestion_state.state.
-+						__state[k]);
-+				congestion_result.q[j] =
-+					mcr->ccgr_query.congestion_state.state;
-+			}
-+			/* mask out the ones I'm not interested in */
-+			qman_ccgrs_and(&rr, &congestion_result,
-+							&p->ccgrs[i][0]);
-+			/*
-+			 * check previous snapshot for delta, enter/exit
-+			 * congestion.
-+			 */
-+			qman_ccgrs_xor(&c, &rr, &p->ccgrs[i][1]);
-+			/* update snapshot */
-+			qman_ccgrs_cp(&p->ccgrs[i][1], &rr);
-+			/* Invoke callback */
-+			list_for_each_entry(ccg, &p->ccgr_cbs[i], cb_node)
-+				if (ccg->cb && qman_ccgrs_get(&c,
-+					(ccg->parent->idx << 4) | ccg->idx))
-+					ccg->cb(ccg, ccg->cb_ctx,
-+						qman_ccgrs_get(&rr,
-+							(ccg->parent->idx << 4)
-+							| ccg->idx));
-+		}
-+		spin_unlock_irqrestore(&p->ccgr_lock, irqflags);
-+	}
-+
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	if (is & QM_PIRQ_EQCI) {
-+		unsigned long irqflags;
-+		PORTAL_IRQ_LOCK(p, irqflags);
-+		p->eqci_owned = NULL;
-+		PORTAL_IRQ_UNLOCK(p, irqflags);
-+		wake_up(&affine_queue);
-+	}
-+#endif
-+
-+	if (is & QM_PIRQ_EQRI) {
-+		unsigned long irqflags __maybe_unused;
-+		PORTAL_IRQ_LOCK(p, irqflags);
-+		qm_eqcr_cce_update(&p->p);
-+		qm_eqcr_set_ithresh(&p->p, 0);
-+		PORTAL_IRQ_UNLOCK(p, irqflags);
-+		wake_up(&affine_queue);
-+	}
-+
-+	if (is & QM_PIRQ_MRI) {
-+		struct qman_fq *fq;
-+		u8 verb, num = 0;
-+mr_loop:
-+		qm_mr_pvb_update(&p->p);
-+		msg = qm_mr_current(&p->p);
-+		if (!msg)
-+			goto mr_done;
-+		swapped_msg = *msg;
-+		hw_fd_to_cpu(&swapped_msg.ern.fd);
-+		verb = msg->verb & QM_MR_VERB_TYPE_MASK;
-+		/* The message is a software ERN iff the 0x20 bit is set */
-+		if (verb & 0x20) {
-+			switch (verb) {
-+			case QM_MR_VERB_FQRNI:
-+				/* nada, we drop FQRNIs on the floor */
-+				break;
-+			case QM_MR_VERB_FQRN:
-+			case QM_MR_VERB_FQRL:
-+				/* Lookup in the retirement table */
-+				fq = table_find_fq(p, be32_to_cpu(msg->fq.fqid));
-+				BUG_ON(!fq);
-+				fq_state_change(p, fq, &swapped_msg, verb);
-+				if (fq->cb.fqs)
-+					fq->cb.fqs(p, fq, &swapped_msg);
-+				break;
-+			case QM_MR_VERB_FQPN:
-+				/* Parked */
-+#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
-+				fq = get_fq_table_entry(
-+					be32_to_cpu(msg->fq.contextB));
-+#else
-+				fq = (void *)(uintptr_t)
-+					be32_to_cpu(msg->fq.contextB);
-+#endif
-+				fq_state_change(p, fq, msg, verb);
-+				if (fq->cb.fqs)
-+					fq->cb.fqs(p, fq, &swapped_msg);
-+				break;
-+			case QM_MR_VERB_DC_ERN:
-+				/* DCP ERN */
-+				if (p->cb_dc_ern)
-+					p->cb_dc_ern(p, msg);
-+				else if (cb_dc_ern)
-+					cb_dc_ern(p, msg);
-+				else {
-+					static int warn_once;
-+					if (!warn_once) {
-+						pr_crit("Leaking DCP ERNs!\n");
-+						warn_once = 1;
-+					}
-+				}
-+				break;
-+			default:
-+				pr_crit("Invalid MR verb 0x%02x\n", verb);
-+			}
-+		} else {
-+			/* Its a software ERN */
-+#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
-+			fq = get_fq_table_entry(be32_to_cpu(msg->ern.tag));
-+#else
-+			fq = (void *)(uintptr_t)be32_to_cpu(msg->ern.tag);
-+#endif
-+			fq->cb.ern(p, fq, &swapped_msg);
-+		}
-+		num++;
-+		qm_mr_next(&p->p);
-+		goto mr_loop;
-+mr_done:
-+		qm_mr_cci_consume(&p->p, num);
-+	}
-+	/*
-+	 * QM_PIRQ_CSCI/CCSCI has already been cleared, as part of its specific
-+	 * processing. If that interrupt source has meanwhile been re-asserted,
-+	 * we mustn't clear it here (or in the top-level interrupt handler).
-+	 */
-+	return is & (QM_PIRQ_EQCI | QM_PIRQ_EQRI | QM_PIRQ_MRI);
-+}
-+
-+/* remove some slowish-path stuff from the "fast path" and make sure it isn't
-+ * inlined. */
-+static noinline void clear_vdqcr(struct qman_portal *p, struct qman_fq *fq)
-+{
-+	p->vdqcr_owned = NULL;
-+	FQLOCK(fq);
-+	fq_clear(fq, QMAN_FQ_STATE_VDQCR);
-+	FQUNLOCK(fq);
-+	wake_up(&affine_queue);
-+}
-+
-+/* Copy a DQRR entry ensuring reads reach QBMan in order */
-+static inline void safe_copy_dqrr(struct qm_dqrr_entry *dst,
-+				  const struct qm_dqrr_entry *src)
-+{
-+	int i = 0;
-+	const u64 *s64 = (u64*)src;
-+	u64 *d64 = (u64*)dst;
-+
-+	/* DQRR only has 32 bytes of valid data so only need to
-+	 * copy 4 - 64 bit values */
-+	*d64 = *s64;
-+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+	{
-+		u32 res, zero = 0;
-+		/* Create a dependancy after copying first bytes ensures no wrap
-+		   transaction generated to QBMan */
-+		/* Logical AND the value pointed to by s64 with 0x0 and
-+		   store the result in res */
-+		asm volatile("and %[result], %[in1], %[in2]"
-+			     : [result] "=r" (res)
-+			     : [in1] "r" (zero), [in2] "r" (*s64)
-+			     : "memory");
-+		/* Add res to s64 - this creates a dependancy on the result of
-+		   reading the value of s64 before the next read. The side
-+		   effect of this is that the core must stall until the first
-+		   aligned read is complete therefore preventing a WRAP
-+		   transaction to be seen by the QBMan */
-+		asm volatile("add %[result], %[in1], %[in2]"
-+			     : [result] "=r" (s64)
-+			     : [in1] "r" (res), [in2] "r" (s64)
-+			     : "memory");
-+	}
-+#endif
-+	/* Copy the last 3 64 bit parts */
-+	d64++; s64++;
-+	for (;i<3; i++)
-+		*d64++ = *s64++;
-+}
-+
-+/* Look: no locks, no irq_save()s, no preempt_disable()s! :-) The only states
-+ * that would conflict with other things if they ran at the same time on the
-+ * same cpu are;
-+ *
-+ *   (i) setting/clearing vdqcr_owned, and
-+ *  (ii) clearing the NE (Not Empty) flag.
-+ *
-+ * Both are safe. Because;
-+ *
-+ *   (i) this clearing can only occur after qman_volatile_dequeue() has set the
-+ *       vdqcr_owned field (which it does before setting VDQCR), and
-+ *       qman_volatile_dequeue() blocks interrupts and preemption while this is
-+ *       done so that we can't interfere.
-+ *  (ii) the NE flag is only cleared after qman_retire_fq() has set it, and as
-+ *       with (i) that API prevents us from interfering until it's safe.
-+ *
-+ * The good thing is that qman_volatile_dequeue() and qman_retire_fq() run far
-+ * less frequently (ie. per-FQ) than __poll_portal_fast() does, so the nett
-+ * advantage comes from this function not having to "lock" anything at all.
-+ *
-+ * Note also that the callbacks are invoked at points which are safe against the
-+ * above potential conflicts, but that this function itself is not re-entrant
-+ * (this is because the function tracks one end of each FIFO in the portal and
-+ * we do *not* want to lock that). So the consequence is that it is safe for
-+ * user callbacks to call into any Qman API *except* qman_poll() (as that's the
-+ * sole API that could be invoking the callback through this function).
-+ */
-+static inline unsigned int __poll_portal_fast(struct qman_portal *p,
-+					unsigned int poll_limit)
-+{
-+	const struct qm_dqrr_entry *dq;
-+	struct qman_fq *fq;
-+	enum qman_cb_dqrr_result res;
-+	unsigned int limit = 0;
-+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
-+	struct qm_dqrr_entry *shadow;
-+	const struct qm_dqrr_entry *orig_dq;
-+#endif
-+loop:
-+	qm_dqrr_pvb_update(&p->p);
-+	dq = qm_dqrr_current(&p->p);
-+	if (!dq)
-+		goto done;
-+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
-+	/* If running on an LE system the fields of the
-+	   dequeue entry must be swapped.  Because the
-+	   QMan HW will ignore writes the DQRR entry is
-+	   copied and the index stored within the copy */
-+	shadow = &p->shadow_dqrr[DQRR_PTR2IDX(dq)];
-+	/* Use safe copy here to avoid WRAP transaction */
-+	safe_copy_dqrr(shadow, dq);
-+	orig_dq = dq;
-+	dq = shadow;
-+	shadow->fqid = be32_to_cpu(shadow->fqid);
-+	shadow->contextB = be32_to_cpu(shadow->contextB);
-+	shadow->seqnum = be16_to_cpu(shadow->seqnum);
-+	hw_fd_to_cpu(&shadow->fd);
-+#endif
-+	if (dq->stat & QM_DQRR_STAT_UNSCHEDULED) {
-+		/* VDQCR: don't trust contextB as the FQ may have been
-+		 * configured for h/w consumption and we're draining it
-+		 * post-retirement. */
-+		fq = p->vdqcr_owned;
-+		/* We only set QMAN_FQ_STATE_NE when retiring, so we only need
-+		 * to check for clearing it when doing volatile dequeues. It's
-+		 * one less thing to check in the critical path (SDQCR). */
-+		if (dq->stat & QM_DQRR_STAT_FQ_EMPTY)
-+			fq_clear(fq, QMAN_FQ_STATE_NE);
-+		/* this is duplicated from the SDQCR code, but we have stuff to
-+		 * do before *and* after this callback, and we don't want
-+		 * multiple if()s in the critical path (SDQCR). */
-+		res = fq->cb.dqrr(p, fq, dq);
-+		if (res == qman_cb_dqrr_stop)
-+			goto done;
-+		/* Check for VDQCR completion */
-+		if (dq->stat & QM_DQRR_STAT_DQCR_EXPIRED)
-+			clear_vdqcr(p, fq);
-+	} else {
-+		/* SDQCR: contextB points to the FQ */
-+#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
-+		fq = get_fq_table_entry(dq->contextB);
-+#else
-+		fq = (void *)(uintptr_t)dq->contextB;
-+#endif
-+		/* Now let the callback do its stuff */
-+		res = fq->cb.dqrr(p, fq, dq);
-+
-+		/* The callback can request that we exit without consuming this
-+		 * entry nor advancing; */
-+		if (res == qman_cb_dqrr_stop)
-+			goto done;
-+	}
-+	/* Interpret 'dq' from a driver perspective. */
-+	/* Parking isn't possible unless HELDACTIVE was set. NB,
-+	 * FORCEELIGIBLE implies HELDACTIVE, so we only need to
-+	 * check for HELDACTIVE to cover both. */
-+	DPA_ASSERT((dq->stat & QM_DQRR_STAT_FQ_HELDACTIVE) ||
-+		(res != qman_cb_dqrr_park));
-+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
-+	if (res != qman_cb_dqrr_defer)
-+		qm_dqrr_cdc_consume_1ptr(&p->p, orig_dq,
-+					 (res == qman_cb_dqrr_park));
-+#else
-+	/* Defer just means "skip it, I'll consume it myself later on" */
-+	if (res != qman_cb_dqrr_defer)
-+		qm_dqrr_cdc_consume_1ptr(&p->p, dq, (res == qman_cb_dqrr_park));
-+#endif
-+	/* Move forward */
-+	qm_dqrr_next(&p->p);
-+	/* Entry processed and consumed, increment our counter. The callback can
-+	 * request that we exit after consuming the entry, and we also exit if
-+	 * we reach our processing limit, so loop back only if neither of these
-+	 * conditions is met. */
-+	if ((++limit < poll_limit) && (res != qman_cb_dqrr_consume_stop))
-+		goto loop;
-+done:
-+	return limit;
-+}
-+
-+u32 qman_irqsource_get(void)
-+{
-+	/* "irqsource" and "poll" APIs mustn't redirect when sharing, they
-+	 * should shut the user out if they are not the primary CPU hosting the
-+	 * portal. That's why we use the "raw" interface. */
-+	struct qman_portal *p = get_raw_affine_portal();
-+	u32 ret = p->irq_sources & QM_PIRQ_VISIBLE;
-+	put_affine_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_irqsource_get);
-+
-+int qman_p_irqsource_add(struct qman_portal *p, u32 bits __maybe_unused)
-+{
-+	__maybe_unused unsigned long irqflags;
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	if (p->sharing_redirect)
-+		return -EINVAL;
-+	else
-+#endif
-+	{
-+		bits = bits & QM_PIRQ_VISIBLE;
-+		PORTAL_IRQ_LOCK(p, irqflags);
-+
-+		/* Clear any previously remaining interrupt conditions in
-+		 * QCSP_ISR. This prevents raising a false interrupt when
-+		 * interrupt conditions are enabled in QCSP_IER.
-+		 */
-+		qm_isr_status_clear(&p->p, bits);
-+		set_bits(bits, &p->irq_sources);
-+		qm_isr_enable_write(&p->p, p->irq_sources);
-+		PORTAL_IRQ_UNLOCK(p, irqflags);
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_p_irqsource_add);
-+
-+int qman_irqsource_add(u32 bits __maybe_unused)
-+{
-+	struct qman_portal *p = get_raw_affine_portal();
-+	int ret;
-+	ret = qman_p_irqsource_add(p, bits);
-+	put_affine_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_irqsource_add);
-+
-+int qman_p_irqsource_remove(struct qman_portal *p, u32 bits)
-+{
-+	__maybe_unused unsigned long irqflags;
-+	u32 ier;
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	if (p->sharing_redirect) {
-+		put_affine_portal();
-+		return -EINVAL;
-+	}
-+#endif
-+	/* Our interrupt handler only processes+clears status register bits that
-+	 * are in p->irq_sources. As we're trimming that mask, if one of them
-+	 * were to assert in the status register just before we remove it from
-+	 * the enable register, there would be an interrupt-storm when we
-+	 * release the IRQ lock. So we wait for the enable register update to
-+	 * take effect in h/w (by reading it back) and then clear all other bits
-+	 * in the status register. Ie. we clear them from ISR once it's certain
-+	 * IER won't allow them to reassert. */
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	bits &= QM_PIRQ_VISIBLE;
-+	clear_bits(bits, &p->irq_sources);
-+	qm_isr_enable_write(&p->p, p->irq_sources);
-+
-+	ier = qm_isr_enable_read(&p->p);
-+	/* Using "~ier" (rather than "bits" or "~p->irq_sources") creates a
-+	 * data-dependency, ie. to protect against re-ordering. */
-+	qm_isr_status_clear(&p->p, ~ier);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_p_irqsource_remove);
-+
-+int qman_irqsource_remove(u32 bits)
-+{
-+	struct qman_portal *p = get_raw_affine_portal();
-+	int ret;
-+	ret = qman_p_irqsource_remove(p, bits);
-+	put_affine_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_irqsource_remove);
-+
-+const cpumask_t *qman_affine_cpus(void)
-+{
-+	return &affine_mask;
-+}
-+EXPORT_SYMBOL(qman_affine_cpus);
-+
-+u16 qman_affine_channel(int cpu)
-+{
-+	if (cpu < 0) {
-+		struct qman_portal *portal = get_raw_affine_portal();
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+		BUG_ON(portal->sharing_redirect);
-+#endif
-+		cpu = portal->config->public_cfg.cpu;
-+		put_affine_portal();
-+	}
-+	BUG_ON(!cpumask_test_cpu(cpu, &affine_mask));
-+	return affine_channels[cpu];
-+}
-+EXPORT_SYMBOL(qman_affine_channel);
-+
-+void *qman_get_affine_portal(int cpu)
-+{
-+	return affine_portals[cpu];
-+}
-+EXPORT_SYMBOL(qman_get_affine_portal);
-+
-+int qman_p_poll_dqrr(struct qman_portal *p, unsigned int limit)
-+{
-+	int ret;
-+
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	if (unlikely(p->sharing_redirect))
-+		ret = -EINVAL;
-+	else
-+#endif
-+	{
-+		BUG_ON(p->irq_sources & QM_PIRQ_DQRI);
-+		ret = __poll_portal_fast(p, limit);
-+	}
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_p_poll_dqrr);
-+
-+int qman_poll_dqrr(unsigned int limit)
-+{
-+	struct qman_portal *p = get_poll_portal();
-+	int ret;
-+	ret = qman_p_poll_dqrr(p, limit);
-+	put_poll_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_poll_dqrr);
-+
-+u32 qman_p_poll_slow(struct qman_portal *p)
-+{
-+	u32 ret;
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	if (unlikely(p->sharing_redirect))
-+		ret = (u32)-1;
-+	else
-+#endif
-+	{
-+		u32 is = qm_isr_status_read(&p->p) & ~p->irq_sources;
-+		ret = __poll_portal_slow(p, is);
-+		qm_isr_status_clear(&p->p, ret);
-+	}
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_p_poll_slow);
-+
-+u32 qman_poll_slow(void)
-+{
-+	struct qman_portal *p = get_poll_portal();
-+	u32 ret;
-+	ret = qman_p_poll_slow(p);
-+	put_poll_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_poll_slow);
-+
-+/* Legacy wrapper */
-+void qman_p_poll(struct qman_portal *p)
-+{
-+#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
-+	if (unlikely(p->sharing_redirect))
-+		return;
-+#endif
-+	if ((~p->irq_sources) & QM_PIRQ_SLOW) {
-+		if (!(p->slowpoll--)) {
-+			u32 is = qm_isr_status_read(&p->p) & ~p->irq_sources;
-+			u32 active = __poll_portal_slow(p, is);
-+			if (active) {
-+				qm_isr_status_clear(&p->p, active);
-+				p->slowpoll = SLOW_POLL_BUSY;
-+			} else
-+				p->slowpoll = SLOW_POLL_IDLE;
-+		}
-+	}
-+	if ((~p->irq_sources) & QM_PIRQ_DQRI)
-+		__poll_portal_fast(p, CONFIG_FSL_QMAN_POLL_LIMIT);
-+}
-+EXPORT_SYMBOL(qman_p_poll);
-+
-+void qman_poll(void)
-+{
-+	struct qman_portal *p = get_poll_portal();
-+	qman_p_poll(p);
-+	put_poll_portal();
-+}
-+EXPORT_SYMBOL(qman_poll);
-+
-+void qman_p_stop_dequeues(struct qman_portal *p)
-+{
-+	qman_stop_dequeues_ex(p);
-+}
-+EXPORT_SYMBOL(qman_p_stop_dequeues);
-+
-+void qman_stop_dequeues(void)
-+{
-+	struct qman_portal *p = get_affine_portal();
-+	qman_p_stop_dequeues(p);
-+	put_affine_portal();
-+}
-+EXPORT_SYMBOL(qman_stop_dequeues);
-+
-+void qman_p_start_dequeues(struct qman_portal *p)
-+{
-+	unsigned long irqflags __maybe_unused;
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	DPA_ASSERT(p->dqrr_disable_ref > 0);
-+	if (!(--p->dqrr_disable_ref))
-+		qm_dqrr_set_maxfill(&p->p, DQRR_MAXFILL);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+}
-+EXPORT_SYMBOL(qman_p_start_dequeues);
-+
-+void qman_start_dequeues(void)
-+{
-+	struct qman_portal *p = get_affine_portal();
-+	qman_p_start_dequeues(p);
-+	put_affine_portal();
-+}
-+EXPORT_SYMBOL(qman_start_dequeues);
-+
-+void qman_p_static_dequeue_add(struct qman_portal *p, u32 pools)
-+{
-+	unsigned long irqflags __maybe_unused;
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	pools &= p->config->public_cfg.pools;
-+	p->sdqcr |= pools;
-+	qm_dqrr_sdqcr_set(&p->p, p->sdqcr);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+}
-+EXPORT_SYMBOL(qman_p_static_dequeue_add);
-+
-+void qman_static_dequeue_add(u32 pools)
-+{
-+	struct qman_portal *p = get_affine_portal();
-+	qman_p_static_dequeue_add(p, pools);
-+	put_affine_portal();
-+}
-+EXPORT_SYMBOL(qman_static_dequeue_add);
-+
-+void qman_p_static_dequeue_del(struct qman_portal *p, u32 pools)
-+{
-+	unsigned long irqflags __maybe_unused;
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	pools &= p->config->public_cfg.pools;
-+	p->sdqcr &= ~pools;
-+	qm_dqrr_sdqcr_set(&p->p, p->sdqcr);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+}
-+EXPORT_SYMBOL(qman_p_static_dequeue_del);
-+
-+void qman_static_dequeue_del(u32 pools)
-+{
-+	struct qman_portal *p = get_affine_portal();
-+	qman_p_static_dequeue_del(p, pools);
-+	put_affine_portal();
-+}
-+EXPORT_SYMBOL(qman_static_dequeue_del);
-+
-+u32 qman_p_static_dequeue_get(struct qman_portal *p)
-+{
-+	return p->sdqcr;
-+}
-+EXPORT_SYMBOL(qman_p_static_dequeue_get);
-+
-+u32 qman_static_dequeue_get(void)
-+{
-+	struct qman_portal *p = get_affine_portal();
-+	u32 ret = qman_p_static_dequeue_get(p);
-+	put_affine_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_static_dequeue_get);
-+
-+void qman_p_dca(struct qman_portal *p, struct qm_dqrr_entry *dq,
-+						int park_request)
-+{
-+	qm_dqrr_cdc_consume_1ptr(&p->p, dq, park_request);
-+}
-+EXPORT_SYMBOL(qman_p_dca);
-+
-+void qman_dca(struct qm_dqrr_entry *dq, int park_request)
-+{
-+	struct qman_portal *p = get_affine_portal();
-+	qman_p_dca(p, dq, park_request);
-+	put_affine_portal();
-+}
-+EXPORT_SYMBOL(qman_dca);
-+
-+/*******************/
-+/* Frame queue API */
-+/*******************/
-+
-+static const char *mcr_result_str(u8 result)
-+{
-+	switch (result) {
-+	case QM_MCR_RESULT_NULL:
-+		return "QM_MCR_RESULT_NULL";
-+	case QM_MCR_RESULT_OK:
-+		return "QM_MCR_RESULT_OK";
-+	case QM_MCR_RESULT_ERR_FQID:
-+		return "QM_MCR_RESULT_ERR_FQID";
-+	case QM_MCR_RESULT_ERR_FQSTATE:
-+		return "QM_MCR_RESULT_ERR_FQSTATE";
-+	case QM_MCR_RESULT_ERR_NOTEMPTY:
-+		return "QM_MCR_RESULT_ERR_NOTEMPTY";
-+	case QM_MCR_RESULT_PENDING:
-+		return "QM_MCR_RESULT_PENDING";
-+	case QM_MCR_RESULT_ERR_BADCOMMAND:
-+		return "QM_MCR_RESULT_ERR_BADCOMMAND";
-+	}
-+	return "<unknown MCR result>";
-+}
-+
-+int qman_create_fq(u32 fqid, u32 flags, struct qman_fq *fq)
-+{
-+	struct qm_fqd fqd;
-+	struct qm_mcr_queryfq_np np;
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+
-+	if (flags & QMAN_FQ_FLAG_DYNAMIC_FQID) {
-+		int ret = qman_alloc_fqid(&fqid);
-+		if (ret)
-+			return ret;
-+	}
-+	spin_lock_init(&fq->fqlock);
-+	fq->fqid = fqid;
-+	fq->flags = flags;
-+	fq->state = qman_fq_state_oos;
-+	fq->cgr_groupid = 0;
-+#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
-+	if (unlikely(find_empty_fq_table_entry(&fq->key, fq)))
-+		return -ENOMEM;
-+#endif
-+	if (!(flags & QMAN_FQ_FLAG_AS_IS) || (flags & QMAN_FQ_FLAG_NO_MODIFY))
-+		return 0;
-+	/* Everything else is AS_IS support */
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	mcc = qm_mc_start(&p->p);
-+	mcc->queryfq.fqid = cpu_to_be32(fqid);
-+	qm_mc_commit(&p->p, QM_MCC_VERB_QUERYFQ);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_MCC_VERB_QUERYFQ);
-+	if (mcr->result != QM_MCR_RESULT_OK) {
-+		pr_err("QUERYFQ failed: %s\n", mcr_result_str(mcr->result));
-+		goto err;
-+	}
-+	fqd = mcr->queryfq.fqd;
-+	hw_fqd_to_cpu(&fqd);
-+	mcc = qm_mc_start(&p->p);
-+	mcc->queryfq_np.fqid = cpu_to_be32(fqid);
-+	qm_mc_commit(&p->p, QM_MCC_VERB_QUERYFQ_NP);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_MCC_VERB_QUERYFQ_NP);
-+	if (mcr->result != QM_MCR_RESULT_OK) {
-+		pr_err("QUERYFQ_NP failed: %s\n", mcr_result_str(mcr->result));
-+		goto err;
-+	}
-+	np = mcr->queryfq_np;
-+	/* Phew, have queryfq and queryfq_np results, stitch together
-+	 * the FQ object from those. */
-+	fq->cgr_groupid = fqd.cgid;
-+	switch (np.state & QM_MCR_NP_STATE_MASK) {
-+	case QM_MCR_NP_STATE_OOS:
-+		break;
-+	case QM_MCR_NP_STATE_RETIRED:
-+		fq->state = qman_fq_state_retired;
-+		if (np.frm_cnt)
-+			fq_set(fq, QMAN_FQ_STATE_NE);
-+		break;
-+	case QM_MCR_NP_STATE_TEN_SCHED:
-+	case QM_MCR_NP_STATE_TRU_SCHED:
-+	case QM_MCR_NP_STATE_ACTIVE:
-+		fq->state = qman_fq_state_sched;
-+		if (np.state & QM_MCR_NP_STATE_R)
-+			fq_set(fq, QMAN_FQ_STATE_CHANGING);
-+		break;
-+	case QM_MCR_NP_STATE_PARKED:
-+		fq->state = qman_fq_state_parked;
-+		break;
-+	default:
-+		DPA_ASSERT(NULL == "invalid FQ state");
-+	}
-+	if (fqd.fq_ctrl & QM_FQCTRL_CGE)
-+		fq->state |= QMAN_FQ_STATE_CGR_EN;
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	return 0;
-+err:
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	if (flags & QMAN_FQ_FLAG_DYNAMIC_FQID)
-+		qman_release_fqid(fqid);
-+	return -EIO;
-+}
-+EXPORT_SYMBOL(qman_create_fq);
-+
-+void qman_destroy_fq(struct qman_fq *fq, u32 flags __maybe_unused)
-+{
-+
-+	/* We don't need to lock the FQ as it is a pre-condition that the FQ be
-+	 * quiesced. Instead, run some checks. */
-+	switch (fq->state) {
-+	case qman_fq_state_parked:
-+		DPA_ASSERT(flags & QMAN_FQ_DESTROY_PARKED);
-+	case qman_fq_state_oos:
-+		if (fq_isset(fq, QMAN_FQ_FLAG_DYNAMIC_FQID))
-+			qman_release_fqid(fq->fqid);
-+#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
-+		clear_fq_table_entry(fq->key);
-+#endif
-+		return;
-+	default:
-+		break;
-+	}
-+	DPA_ASSERT(NULL == "qman_free_fq() on unquiesced FQ!");
-+}
-+EXPORT_SYMBOL(qman_destroy_fq);
-+
-+u32 qman_fq_fqid(struct qman_fq *fq)
-+{
-+	return fq->fqid;
-+}
-+EXPORT_SYMBOL(qman_fq_fqid);
-+
-+void qman_fq_state(struct qman_fq *fq, enum qman_fq_state *state, u32 *flags)
-+{
-+	if (state)
-+		*state = fq->state;
-+	if (flags)
-+		*flags = fq->flags;
-+}
-+EXPORT_SYMBOL(qman_fq_state);
-+
-+int qman_init_fq(struct qman_fq *fq, u32 flags, struct qm_mcc_initfq *opts)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res, myverb = (flags & QMAN_INITFQ_FLAG_SCHED) ?
-+		QM_MCC_VERB_INITFQ_SCHED : QM_MCC_VERB_INITFQ_PARKED;
-+
-+	if ((fq->state != qman_fq_state_oos) &&
-+			(fq->state != qman_fq_state_parked))
-+		return -EINVAL;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	if (unlikely(fq_isset(fq, QMAN_FQ_FLAG_NO_MODIFY)))
-+		return -EINVAL;
-+#endif
-+	if (opts && (opts->we_mask & QM_INITFQ_WE_OAC)) {
-+		/* And can't be set at the same time as TDTHRESH */
-+		if (opts->we_mask & QM_INITFQ_WE_TDTHRESH)
-+			return -EINVAL;
-+	}
-+	/* Issue an INITFQ_[PARKED|SCHED] management command */
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	FQLOCK(fq);
-+	if (unlikely((fq_isset(fq, QMAN_FQ_STATE_CHANGING)) ||
-+			((fq->state != qman_fq_state_oos) &&
-+				(fq->state != qman_fq_state_parked)))) {
-+		FQUNLOCK(fq);
-+		PORTAL_IRQ_UNLOCK(p, irqflags);
-+		put_affine_portal();
-+		return -EBUSY;
-+	}
-+	mcc = qm_mc_start(&p->p);
-+	if (opts)
-+		mcc->initfq = *opts;
-+	mcc->initfq.fqid = cpu_to_be32(fq->fqid);
-+	mcc->initfq.count = 0;
-+
-+	/* If the FQ does *not* have the TO_DCPORTAL flag, contextB is set as a
-+	 * demux pointer. Otherwise, the caller-provided value is allowed to
-+	 * stand, don't overwrite it. */
-+	if (fq_isclear(fq, QMAN_FQ_FLAG_TO_DCPORTAL)) {
-+		dma_addr_t phys_fq;
-+		mcc->initfq.we_mask |= QM_INITFQ_WE_CONTEXTB;
-+#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
-+		mcc->initfq.fqd.context_b = fq->key;
-+#else
-+		mcc->initfq.fqd.context_b = (u32)(uintptr_t)fq;
-+#endif
-+		/* and the physical address - NB, if the user wasn't trying to
-+		 * set CONTEXTA, clear the stashing settings. */
-+		if (!(mcc->initfq.we_mask & QM_INITFQ_WE_CONTEXTA)) {
-+			mcc->initfq.we_mask |= QM_INITFQ_WE_CONTEXTA;
-+			memset(&mcc->initfq.fqd.context_a, 0,
-+				sizeof(mcc->initfq.fqd.context_a));
-+		} else {
-+			phys_fq = dma_map_single(&p->pdev->dev, fq, sizeof(*fq),
-+						DMA_TO_DEVICE);
-+			qm_fqd_stashing_set64(&mcc->initfq.fqd, phys_fq);
-+		}
-+	}
-+	if (flags & QMAN_INITFQ_FLAG_LOCAL) {
-+		mcc->initfq.fqd.dest.channel = p->config->public_cfg.channel;
-+		if (!(mcc->initfq.we_mask & QM_INITFQ_WE_DESTWQ)) {
-+			mcc->initfq.we_mask |= QM_INITFQ_WE_DESTWQ;
-+			mcc->initfq.fqd.dest.wq = 4;
-+		}
-+	}
-+	mcc->initfq.we_mask = cpu_to_be16(mcc->initfq.we_mask);
-+	cpu_to_hw_fqd(&mcc->initfq.fqd);
-+	qm_mc_commit(&p->p, myverb);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == myverb);
-+	res = mcr->result;
-+	if (res != QM_MCR_RESULT_OK) {
-+		FQUNLOCK(fq);
-+		PORTAL_IRQ_UNLOCK(p, irqflags);
-+		put_affine_portal();
-+		return -EIO;
-+	}
-+	if (opts) {
-+		if (opts->we_mask & QM_INITFQ_WE_FQCTRL) {
-+			if (opts->fqd.fq_ctrl & QM_FQCTRL_CGE)
-+				fq_set(fq, QMAN_FQ_STATE_CGR_EN);
-+			else
-+				fq_clear(fq, QMAN_FQ_STATE_CGR_EN);
-+		}
-+		if (opts->we_mask & QM_INITFQ_WE_CGID)
-+			fq->cgr_groupid = opts->fqd.cgid;
-+	}
-+	fq->state = (flags & QMAN_INITFQ_FLAG_SCHED) ?
-+			qman_fq_state_sched : qman_fq_state_parked;
-+	FQUNLOCK(fq);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_init_fq);
-+
-+int qman_schedule_fq(struct qman_fq *fq)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	int ret = 0;
-+	u8 res;
-+
-+	if (fq->state != qman_fq_state_parked)
-+		return -EINVAL;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	if (unlikely(fq_isset(fq, QMAN_FQ_FLAG_NO_MODIFY)))
-+		return -EINVAL;
-+#endif
-+	/* Issue a ALTERFQ_SCHED management command */
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	FQLOCK(fq);
-+	if (unlikely((fq_isset(fq, QMAN_FQ_STATE_CHANGING)) ||
-+			(fq->state != qman_fq_state_parked))) {
-+		ret = -EBUSY;
-+		goto out;
-+	}
-+	mcc = qm_mc_start(&p->p);
-+	mcc->alterfq.fqid = cpu_to_be32(fq->fqid);
-+	qm_mc_commit(&p->p, QM_MCC_VERB_ALTER_SCHED);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_MCR_VERB_ALTER_SCHED);
-+	res = mcr->result;
-+	if (res != QM_MCR_RESULT_OK) {
-+		ret = -EIO;
-+		goto out;
-+	}
-+	fq->state = qman_fq_state_sched;
-+out:
-+	FQUNLOCK(fq);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_schedule_fq);
-+
-+int qman_retire_fq(struct qman_fq *fq, u32 *flags)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	int rval;
-+	u8 res;
-+
-+	if ((fq->state != qman_fq_state_parked) &&
-+			(fq->state != qman_fq_state_sched))
-+		return -EINVAL;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	if (unlikely(fq_isset(fq, QMAN_FQ_FLAG_NO_MODIFY)))
-+		return -EINVAL;
-+#endif
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	FQLOCK(fq);
-+	if (unlikely((fq_isset(fq, QMAN_FQ_STATE_CHANGING)) ||
-+			(fq->state == qman_fq_state_retired) ||
-+				(fq->state == qman_fq_state_oos))) {
-+		rval = -EBUSY;
-+		goto out;
-+	}
-+	rval = table_push_fq(p, fq);
-+	if (rval)
-+		goto out;
-+	mcc = qm_mc_start(&p->p);
-+	mcc->alterfq.fqid = cpu_to_be32(fq->fqid);
-+	qm_mc_commit(&p->p, QM_MCC_VERB_ALTER_RETIRE);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_MCR_VERB_ALTER_RETIRE);
-+	res = mcr->result;
-+	/* "Elegant" would be to treat OK/PENDING the same way; set CHANGING,
-+	 * and defer the flags until FQRNI or FQRN (respectively) show up. But
-+	 * "Friendly" is to process OK immediately, and not set CHANGING. We do
-+	 * friendly, otherwise the caller doesn't necessarily have a fully
-+	 * "retired" FQ on return even if the retirement was immediate. However
-+	 * this does mean some code duplication between here and
-+	 * fq_state_change(). */
-+	if (likely(res == QM_MCR_RESULT_OK)) {
-+		rval = 0;
-+		/* Process 'fq' right away, we'll ignore FQRNI */
-+		if (mcr->alterfq.fqs & QM_MCR_FQS_NOTEMPTY)
-+			fq_set(fq, QMAN_FQ_STATE_NE);
-+		if (mcr->alterfq.fqs & QM_MCR_FQS_ORLPRESENT)
-+			fq_set(fq, QMAN_FQ_STATE_ORL);
-+		else
-+			table_del_fq(p, fq);
-+		if (flags)
-+			*flags = fq->flags;
-+		fq->state = qman_fq_state_retired;
-+		if (fq->cb.fqs) {
-+			/* Another issue with supporting "immediate" retirement
-+			 * is that we're forced to drop FQRNIs, because by the
-+			 * time they're seen it may already be "too late" (the
-+			 * fq may have been OOS'd and free()'d already). But if
-+			 * the upper layer wants a callback whether it's
-+			 * immediate or not, we have to fake a "MR" entry to
-+			 * look like an FQRNI... */
-+			struct qm_mr_entry msg;
-+			msg.verb = QM_MR_VERB_FQRNI;
-+			msg.fq.fqs = mcr->alterfq.fqs;
-+			msg.fq.fqid = fq->fqid;
-+#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
-+			msg.fq.contextB = fq->key;
-+#else
-+			msg.fq.contextB = (u32)(uintptr_t)fq;
-+#endif
-+			fq->cb.fqs(p, fq, &msg);
-+		}
-+	} else if (res == QM_MCR_RESULT_PENDING) {
-+		rval = 1;
-+		fq_set(fq, QMAN_FQ_STATE_CHANGING);
-+	} else {
-+		rval = -EIO;
-+		table_del_fq(p, fq);
-+	}
-+out:
-+	FQUNLOCK(fq);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	return rval;
-+}
-+EXPORT_SYMBOL(qman_retire_fq);
-+
-+int qman_oos_fq(struct qman_fq *fq)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	int ret = 0;
-+	u8 res;
-+
-+	if (fq->state != qman_fq_state_retired)
-+		return -EINVAL;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	if (unlikely(fq_isset(fq, QMAN_FQ_FLAG_NO_MODIFY)))
-+		return -EINVAL;
-+#endif
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	FQLOCK(fq);
-+	if (unlikely((fq_isset(fq, QMAN_FQ_STATE_BLOCKOOS)) ||
-+			(fq->state != qman_fq_state_retired))) {
-+		ret = -EBUSY;
-+		goto out;
-+	}
-+	mcc = qm_mc_start(&p->p);
-+	mcc->alterfq.fqid = cpu_to_be32(fq->fqid);
-+	qm_mc_commit(&p->p, QM_MCC_VERB_ALTER_OOS);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_MCR_VERB_ALTER_OOS);
-+	res = mcr->result;
-+	if (res != QM_MCR_RESULT_OK) {
-+		ret = -EIO;
-+		goto out;
-+	}
-+	fq->state = qman_fq_state_oos;
-+out:
-+	FQUNLOCK(fq);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_oos_fq);
-+
-+int qman_fq_flow_control(struct qman_fq *fq, int xon)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	int ret = 0;
-+	u8 res;
-+	u8 myverb;
-+
-+	if ((fq->state == qman_fq_state_oos) ||
-+		(fq->state == qman_fq_state_retired) ||
-+		(fq->state == qman_fq_state_parked))
-+		return -EINVAL;
-+
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	if (unlikely(fq_isset(fq, QMAN_FQ_FLAG_NO_MODIFY)))
-+		return -EINVAL;
-+#endif
-+	/* Issue a ALTER_FQXON or ALTER_FQXOFF management command */
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	FQLOCK(fq);
-+	if (unlikely((fq_isset(fq, QMAN_FQ_STATE_CHANGING)) ||
-+			(fq->state == qman_fq_state_parked) ||
-+			(fq->state == qman_fq_state_oos) ||
-+			(fq->state == qman_fq_state_retired))) {
-+		ret = -EBUSY;
-+		goto out;
-+	}
-+	mcc = qm_mc_start(&p->p);
-+	mcc->alterfq.fqid = fq->fqid;
-+	mcc->alterfq.count = 0;
-+	myverb = xon ? QM_MCC_VERB_ALTER_FQXON : QM_MCC_VERB_ALTER_FQXOFF;
-+
-+	qm_mc_commit(&p->p, myverb);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == myverb);
-+
-+	res = mcr->result;
-+	if (res != QM_MCR_RESULT_OK) {
-+		ret = -EIO;
-+		goto out;
-+	}
-+out:
-+	FQUNLOCK(fq);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_fq_flow_control);
-+
-+int qman_query_fq(struct qman_fq *fq, struct qm_fqd *fqd)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p = get_affine_portal();
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	mcc = qm_mc_start(&p->p);
-+	mcc->queryfq.fqid = cpu_to_be32(fq->fqid);
-+	qm_mc_commit(&p->p, QM_MCC_VERB_QUERYFQ);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_MCR_VERB_QUERYFQ);
-+	res = mcr->result;
-+	if (res == QM_MCR_RESULT_OK)
-+		*fqd = mcr->queryfq.fqd;
-+	hw_fqd_to_cpu(fqd);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	if (res != QM_MCR_RESULT_OK)
-+		return -EIO;
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_query_fq);
-+
-+int qman_query_fq_np(struct qman_fq *fq, struct qm_mcr_queryfq_np *np)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p = get_affine_portal();
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	mcc = qm_mc_start(&p->p);
-+	mcc->queryfq.fqid = cpu_to_be32(fq->fqid);
-+	qm_mc_commit(&p->p, QM_MCC_VERB_QUERYFQ_NP);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_MCR_VERB_QUERYFQ_NP);
-+	res = mcr->result;
-+	if (res == QM_MCR_RESULT_OK) {
-+		*np = mcr->queryfq_np;
-+		np->fqd_link = be24_to_cpu(np->fqd_link);
-+		np->odp_seq = be16_to_cpu(np->odp_seq);
-+		np->orp_nesn = be16_to_cpu(np->orp_nesn);
-+		np->orp_ea_hseq  = be16_to_cpu(np->orp_ea_hseq);
-+		np->orp_ea_tseq  = be16_to_cpu(np->orp_ea_tseq);
-+		np->orp_ea_hptr = be24_to_cpu(np->orp_ea_hptr);
-+		np->orp_ea_tptr = be24_to_cpu(np->orp_ea_tptr);
-+		np->pfdr_hptr = be24_to_cpu(np->pfdr_hptr);
-+		np->pfdr_tptr = be24_to_cpu(np->pfdr_tptr);
-+		np->ics_surp = be16_to_cpu(np->ics_surp);
-+		np->byte_cnt = be32_to_cpu(np->byte_cnt);
-+		np->frm_cnt = be24_to_cpu(np->frm_cnt);
-+		np->ra1_sfdr = be16_to_cpu(np->ra1_sfdr);
-+		np->ra2_sfdr = be16_to_cpu(np->ra2_sfdr);
-+		np->od1_sfdr = be16_to_cpu(np->od1_sfdr);
-+		np->od2_sfdr = be16_to_cpu(np->od2_sfdr);
-+		np->od3_sfdr = be16_to_cpu(np->od3_sfdr);
-+	}
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	if (res == QM_MCR_RESULT_ERR_FQID)
-+		return -ERANGE;
-+	else if (res != QM_MCR_RESULT_OK)
-+		return -EIO;
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_query_fq_np);
-+
-+int qman_query_wq(u8 query_dedicated, struct qm_mcr_querywq *wq)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p = get_affine_portal();
-+	unsigned long irqflags __maybe_unused;
-+	u8 res, myverb;
-+
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	myverb = (query_dedicated) ? QM_MCR_VERB_QUERYWQ_DEDICATED :
-+				 QM_MCR_VERB_QUERYWQ;
-+	mcc = qm_mc_start(&p->p);
-+	mcc->querywq.channel.id = cpu_to_be16(wq->channel.id);
-+	qm_mc_commit(&p->p, myverb);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == myverb);
-+	res = mcr->result;
-+	if (res == QM_MCR_RESULT_OK) {
-+		int i, array_len;
-+		wq->channel.id = be16_to_cpu(mcr->querywq.channel.id);
-+		array_len = ARRAY_SIZE(mcr->querywq.wq_len);
-+		for (i = 0; i < array_len; i++)
-+			wq->wq_len[i] = be32_to_cpu(mcr->querywq.wq_len[i]);
-+	}
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("QUERYWQ failed: %s\n", mcr_result_str(res));
-+		return -EIO;
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_query_wq);
-+
-+int qman_testwrite_cgr(struct qman_cgr *cgr, u64 i_bcnt,
-+			struct qm_mcr_cgrtestwrite *result)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p = get_affine_portal();
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	mcc = qm_mc_start(&p->p);
-+	mcc->cgrtestwrite.cgid = cgr->cgrid;
-+	mcc->cgrtestwrite.i_bcnt_hi = (u8)(i_bcnt >> 32);
-+	mcc->cgrtestwrite.i_bcnt_lo = (u32)i_bcnt;
-+	qm_mc_commit(&p->p, QM_MCC_VERB_CGRTESTWRITE);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_MCC_VERB_CGRTESTWRITE);
-+	res = mcr->result;
-+	if (res == QM_MCR_RESULT_OK)
-+		*result = mcr->cgrtestwrite;
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CGR TEST WRITE failed: %s\n", mcr_result_str(res));
-+		return -EIO;
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_testwrite_cgr);
-+
-+int qman_query_cgr(struct qman_cgr *cgr, struct qm_mcr_querycgr *cgrd)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p = get_affine_portal();
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+	int i;
-+
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	mcc = qm_mc_start(&p->p);
-+	mcc->querycgr.cgid = cgr->cgrid;
-+	qm_mc_commit(&p->p, QM_MCC_VERB_QUERYCGR);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_MCC_VERB_QUERYCGR);
-+	res = mcr->result;
-+	if (res == QM_MCR_RESULT_OK)
-+		*cgrd = mcr->querycgr;
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("QUERY_CGR failed: %s\n", mcr_result_str(res));
-+		return -EIO;
-+	}
-+	cgrd->cgr.wr_parm_g.word =
-+		be32_to_cpu(cgrd->cgr.wr_parm_g.word);
-+	cgrd->cgr.wr_parm_y.word =
-+		be32_to_cpu(cgrd->cgr.wr_parm_y.word);
-+	cgrd->cgr.wr_parm_r.word =
-+		be32_to_cpu(cgrd->cgr.wr_parm_r.word);
-+	cgrd->cgr.cscn_targ =  be32_to_cpu(cgrd->cgr.cscn_targ);
-+	cgrd->cgr.__cs_thres = be16_to_cpu(cgrd->cgr.__cs_thres);
-+	for (i = 0; i < ARRAY_SIZE(cgrd->cscn_targ_swp); i++)
-+			be32_to_cpus(&cgrd->cscn_targ_swp[i]);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_query_cgr);
-+
-+int qman_query_congestion(struct qm_mcr_querycongestion *congestion)
-+{
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p = get_affine_portal();
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+	int i;
-+
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	qm_mc_start(&p->p);
-+	qm_mc_commit(&p->p, QM_MCC_VERB_QUERYCONGESTION);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) ==
-+			QM_MCC_VERB_QUERYCONGESTION);
-+	res = mcr->result;
-+	if (res == QM_MCR_RESULT_OK)
-+		memcpy_fromio(congestion, &mcr->querycongestion,
-+			      sizeof(*congestion));
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("QUERY_CONGESTION failed: %s\n", mcr_result_str(res));
-+		return -EIO;
-+	}
-+
-+	for (i = 0; i < ARRAY_SIZE(congestion->state.__state); i++)
-+			be32_to_cpus(&congestion->state.__state[i]);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_query_congestion);
-+
-+/* internal function used as a wait_event() expression */
-+static int set_p_vdqcr(struct qman_portal *p, struct qman_fq *fq, u32 vdqcr)
-+{
-+	unsigned long irqflags __maybe_unused;
-+	int ret = -EBUSY;
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	if (!p->vdqcr_owned) {
-+		FQLOCK(fq);
-+		if (fq_isset(fq, QMAN_FQ_STATE_VDQCR))
-+			goto escape;
-+		fq_set(fq, QMAN_FQ_STATE_VDQCR);
-+		FQUNLOCK(fq);
-+		p->vdqcr_owned = fq;
-+		ret = 0;
-+	}
-+escape:
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	if (!ret)
-+		qm_dqrr_vdqcr_set(&p->p, vdqcr);
-+	return ret;
-+}
-+
-+static int set_vdqcr(struct qman_portal **p, struct qman_fq *fq, u32 vdqcr)
-+{
-+	int ret;
-+	*p = get_affine_portal();
-+	ret = set_p_vdqcr(*p, fq, vdqcr);
-+	put_affine_portal();
-+	return ret;
-+}
-+
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+static int wait_p_vdqcr_start(struct qman_portal *p, struct qman_fq *fq,
-+				u32 vdqcr, u32 flags)
-+{
-+	int ret = 0;
-+	if (flags & QMAN_VOLATILE_FLAG_WAIT_INT)
-+		ret = wait_event_interruptible(affine_queue,
-+				!(ret = set_p_vdqcr(p, fq, vdqcr)));
-+	else
-+		wait_event(affine_queue, !(ret = set_p_vdqcr(p, fq, vdqcr)));
-+	return ret;
-+}
-+
-+static int wait_vdqcr_start(struct qman_portal **p, struct qman_fq *fq,
-+				u32 vdqcr, u32 flags)
-+{
-+	int ret = 0;
-+	if (flags & QMAN_VOLATILE_FLAG_WAIT_INT)
-+		ret = wait_event_interruptible(affine_queue,
-+				!(ret = set_vdqcr(p, fq, vdqcr)));
-+	else
-+		wait_event(affine_queue, !(ret = set_vdqcr(p, fq, vdqcr)));
-+	return ret;
-+}
-+#endif
-+
-+int qman_p_volatile_dequeue(struct qman_portal *p, struct qman_fq *fq,
-+					u32 flags __maybe_unused, u32 vdqcr)
-+{
-+	int ret;
-+
-+	if ((fq->state != qman_fq_state_parked) &&
-+			(fq->state != qman_fq_state_retired))
-+		return -EINVAL;
-+	if (vdqcr & QM_VDQCR_FQID_MASK)
-+		return -EINVAL;
-+	if (fq_isset(fq, QMAN_FQ_STATE_VDQCR))
-+		return -EBUSY;
-+	vdqcr = (vdqcr & ~QM_VDQCR_FQID_MASK) | fq->fqid;
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+	if (flags & QMAN_VOLATILE_FLAG_WAIT)
-+		ret = wait_p_vdqcr_start(p, fq, vdqcr, flags);
-+	else
-+#endif
-+		ret = set_p_vdqcr(p, fq, vdqcr);
-+	if (ret)
-+		return ret;
-+	/* VDQCR is set */
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+	if (flags & QMAN_VOLATILE_FLAG_FINISH) {
-+		if (flags & QMAN_VOLATILE_FLAG_WAIT_INT)
-+			/* NB: don't propagate any error - the caller wouldn't
-+			 * know whether the VDQCR was issued or not. A signal
-+			 * could arrive after returning anyway, so the caller
-+			 * can check signal_pending() if that's an issue. */
-+			wait_event_interruptible(affine_queue,
-+				!fq_isset(fq, QMAN_FQ_STATE_VDQCR));
-+		else
-+			wait_event(affine_queue,
-+				!fq_isset(fq, QMAN_FQ_STATE_VDQCR));
-+	}
-+#endif
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_p_volatile_dequeue);
-+
-+int qman_volatile_dequeue(struct qman_fq *fq, u32 flags __maybe_unused,
-+				u32 vdqcr)
-+{
-+	struct qman_portal *p;
-+	int ret;
-+
-+	if ((fq->state != qman_fq_state_parked) &&
-+			(fq->state != qman_fq_state_retired))
-+		return -EINVAL;
-+	if (vdqcr & QM_VDQCR_FQID_MASK)
-+		return -EINVAL;
-+	if (fq_isset(fq, QMAN_FQ_STATE_VDQCR))
-+		return -EBUSY;
-+	vdqcr = (vdqcr & ~QM_VDQCR_FQID_MASK) | fq->fqid;
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+	if (flags & QMAN_VOLATILE_FLAG_WAIT)
-+		ret = wait_vdqcr_start(&p, fq, vdqcr, flags);
-+	else
-+#endif
-+		ret = set_vdqcr(&p, fq, vdqcr);
-+	if (ret)
-+		return ret;
-+	/* VDQCR is set */
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+	if (flags & QMAN_VOLATILE_FLAG_FINISH) {
-+		if (flags & QMAN_VOLATILE_FLAG_WAIT_INT)
-+			/* NB: don't propagate any error - the caller wouldn't
-+			 * know whether the VDQCR was issued or not. A signal
-+			 * could arrive after returning anyway, so the caller
-+			 * can check signal_pending() if that's an issue. */
-+			wait_event_interruptible(affine_queue,
-+				!fq_isset(fq, QMAN_FQ_STATE_VDQCR));
-+		else
-+			wait_event(affine_queue,
-+				!fq_isset(fq, QMAN_FQ_STATE_VDQCR));
-+	}
-+#endif
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_volatile_dequeue);
-+
-+static noinline void update_eqcr_ci(struct qman_portal *p, u8 avail)
-+{
-+	if (avail)
-+		qm_eqcr_cce_prefetch(&p->p);
-+	else
-+		qm_eqcr_cce_update(&p->p);
-+}
-+
-+int qman_eqcr_is_empty(void)
-+{
-+	unsigned long irqflags __maybe_unused;
-+	struct qman_portal *p = get_affine_portal();
-+	u8 avail;
-+
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	update_eqcr_ci(p, 0);
-+	avail = qm_eqcr_get_fill(&p->p);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	return avail == 0;
-+}
-+EXPORT_SYMBOL(qman_eqcr_is_empty);
-+
-+void qman_set_dc_ern(qman_cb_dc_ern handler, int affine)
-+{
-+	if (affine) {
-+		unsigned long irqflags __maybe_unused;
-+		struct qman_portal *p = get_affine_portal();
-+		PORTAL_IRQ_LOCK(p, irqflags);
-+		p->cb_dc_ern = handler;
-+		PORTAL_IRQ_UNLOCK(p, irqflags);
-+		put_affine_portal();
-+	} else
-+		cb_dc_ern = handler;
-+}
-+EXPORT_SYMBOL(qman_set_dc_ern);
-+
-+static inline struct qm_eqcr_entry *try_p_eq_start(struct qman_portal *p,
-+					unsigned long *irqflags __maybe_unused,
-+					struct qman_fq *fq,
-+					const struct qm_fd *fd,
-+					u32 flags)
-+{
-+	struct qm_eqcr_entry *eq;
-+	u8 avail;
-+	PORTAL_IRQ_LOCK(p, (*irqflags));
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	if (unlikely((flags & QMAN_ENQUEUE_FLAG_WAIT) &&
-+			(flags & QMAN_ENQUEUE_FLAG_WAIT_SYNC))) {
-+		if (p->eqci_owned) {
-+			PORTAL_IRQ_UNLOCK(p, (*irqflags));
-+			return NULL;
-+		}
-+		p->eqci_owned = fq;
-+	}
-+#endif
-+	if (p->use_eqcr_ci_stashing) {
-+		/*
-+		 * The stashing case is easy, only update if we need to in
-+		 * order to try and liberate ring entries.
-+		 */
-+		eq = qm_eqcr_start_stash(&p->p);
-+	} else {
-+		/*
-+		 * The non-stashing case is harder, need to prefetch ahead of
-+		 * time.
-+		 */
-+		avail = qm_eqcr_get_avail(&p->p);
-+		if (avail < 2)
-+			update_eqcr_ci(p, avail);
-+		eq = qm_eqcr_start_no_stash(&p->p);
-+	}
-+
-+	if (unlikely(!eq)) {
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+		if (unlikely((flags & QMAN_ENQUEUE_FLAG_WAIT) &&
-+				(flags & QMAN_ENQUEUE_FLAG_WAIT_SYNC)))
-+			p->eqci_owned = NULL;
-+#endif
-+		PORTAL_IRQ_UNLOCK(p, (*irqflags));
-+		return NULL;
-+	}
-+	if (flags & QMAN_ENQUEUE_FLAG_DCA)
-+		eq->dca = QM_EQCR_DCA_ENABLE |
-+			((flags & QMAN_ENQUEUE_FLAG_DCA_PARK) ?
-+					QM_EQCR_DCA_PARK : 0) |
-+			((flags >> 8) & QM_EQCR_DCA_IDXMASK);
-+	eq->fqid = cpu_to_be32(fq->fqid);
-+#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
-+	eq->tag = cpu_to_be32(fq->key);
-+#else
-+	eq->tag = cpu_to_be32((u32)(uintptr_t)fq);
-+#endif
-+	eq->fd = *fd;
-+	cpu_to_hw_fd(&eq->fd);
-+	return eq;
-+}
-+
-+static inline struct qm_eqcr_entry *try_eq_start(struct qman_portal **p,
-+					unsigned long *irqflags __maybe_unused,
-+					struct qman_fq *fq,
-+					const struct qm_fd *fd,
-+					u32 flags)
-+{
-+	struct qm_eqcr_entry *eq;
-+	*p = get_affine_portal();
-+	eq = try_p_eq_start(*p, irqflags, fq, fd, flags);
-+	if (!eq)
-+		put_affine_portal();
-+	return eq;
-+}
-+
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+static noinline struct qm_eqcr_entry *__wait_eq_start(struct qman_portal **p,
-+					unsigned long *irqflags __maybe_unused,
-+					struct qman_fq *fq,
-+					const struct qm_fd *fd,
-+					u32 flags)
-+{
-+	struct qm_eqcr_entry *eq = try_eq_start(p, irqflags, fq, fd, flags);
-+	if (!eq)
-+		qm_eqcr_set_ithresh(&(*p)->p, EQCR_ITHRESH);
-+	return eq;
-+}
-+static noinline struct qm_eqcr_entry *wait_eq_start(struct qman_portal **p,
-+					unsigned long *irqflags __maybe_unused,
-+					struct qman_fq *fq,
-+					const struct qm_fd *fd,
-+					u32 flags)
-+{
-+	struct qm_eqcr_entry *eq;
-+	if (flags & QMAN_ENQUEUE_FLAG_WAIT_INT)
-+		/* NB: return NULL if signal occurs before completion. Signal
-+		 * can occur during return. Caller must check for signal */
-+		wait_event_interruptible(affine_queue,
-+			(eq = __wait_eq_start(p, irqflags, fq, fd, flags)));
-+	else
-+		wait_event(affine_queue,
-+			(eq = __wait_eq_start(p, irqflags, fq, fd, flags)));
-+	return eq;
-+}
-+static noinline struct qm_eqcr_entry *__wait_p_eq_start(struct qman_portal *p,
-+					unsigned long *irqflags __maybe_unused,
-+					struct qman_fq *fq,
-+					const struct qm_fd *fd,
-+					u32 flags)
-+{
-+	struct qm_eqcr_entry *eq = try_p_eq_start(p, irqflags, fq, fd, flags);
-+	if (!eq)
-+		qm_eqcr_set_ithresh(&p->p, EQCR_ITHRESH);
-+	return eq;
-+}
-+static noinline struct qm_eqcr_entry *wait_p_eq_start(struct qman_portal *p,
-+					unsigned long *irqflags __maybe_unused,
-+					struct qman_fq *fq,
-+					const struct qm_fd *fd,
-+					u32 flags)
-+{
-+	struct qm_eqcr_entry *eq;
-+	if (flags & QMAN_ENQUEUE_FLAG_WAIT_INT)
-+		/* NB: return NULL if signal occurs before completion. Signal
-+		 * can occur during return. Caller must check for signal */
-+		wait_event_interruptible(affine_queue,
-+			(eq = __wait_p_eq_start(p, irqflags, fq, fd, flags)));
-+	else
-+		wait_event(affine_queue,
-+			(eq = __wait_p_eq_start(p, irqflags, fq, fd, flags)));
-+	return eq;
-+}
-+#endif
-+
-+int qman_p_enqueue(struct qman_portal *p, struct qman_fq *fq,
-+				const struct qm_fd *fd, u32 flags)
-+{
-+	struct qm_eqcr_entry *eq;
-+	unsigned long irqflags __maybe_unused;
-+
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+	if (flags & QMAN_ENQUEUE_FLAG_WAIT)
-+		eq = wait_p_eq_start(p, &irqflags, fq, fd, flags);
-+	else
-+#endif
-+	eq = try_p_eq_start(p, &irqflags, fq, fd, flags);
-+	if (!eq)
-+		return -EBUSY;
-+	/* Note: QM_EQCR_VERB_INTERRUPT == QMAN_ENQUEUE_FLAG_WAIT_SYNC */
-+	qm_eqcr_pvb_commit(&p->p, QM_EQCR_VERB_CMD_ENQUEUE |
-+		(flags & (QM_EQCR_VERB_COLOUR_MASK | QM_EQCR_VERB_INTERRUPT)));
-+	/* Factor the below out, it's used from qman_enqueue_orp() too */
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	if (unlikely((flags & QMAN_ENQUEUE_FLAG_WAIT) &&
-+			(flags & QMAN_ENQUEUE_FLAG_WAIT_SYNC))) {
-+		if (flags & QMAN_ENQUEUE_FLAG_WAIT_INT)
-+			/* NB: return success even if signal occurs before
-+			 * condition is true. pvb_commit guarantees success */
-+			wait_event_interruptible(affine_queue,
-+					(p->eqci_owned != fq));
-+		else
-+			wait_event(affine_queue, (p->eqci_owned != fq));
-+	}
-+#endif
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_p_enqueue);
-+
-+int qman_enqueue(struct qman_fq *fq, const struct qm_fd *fd, u32 flags)
-+{
-+	struct qman_portal *p;
-+	struct qm_eqcr_entry *eq;
-+	unsigned long irqflags __maybe_unused;
-+
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+	if (flags & QMAN_ENQUEUE_FLAG_WAIT)
-+		eq = wait_eq_start(&p, &irqflags, fq, fd, flags);
-+	else
-+#endif
-+	eq = try_eq_start(&p, &irqflags, fq, fd, flags);
-+	if (!eq)
-+		return -EBUSY;
-+	/* Note: QM_EQCR_VERB_INTERRUPT == QMAN_ENQUEUE_FLAG_WAIT_SYNC */
-+	qm_eqcr_pvb_commit(&p->p, QM_EQCR_VERB_CMD_ENQUEUE |
-+		(flags & (QM_EQCR_VERB_COLOUR_MASK | QM_EQCR_VERB_INTERRUPT)));
-+	/* Factor the below out, it's used from qman_enqueue_orp() too */
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	if (unlikely((flags & QMAN_ENQUEUE_FLAG_WAIT) &&
-+			(flags & QMAN_ENQUEUE_FLAG_WAIT_SYNC))) {
-+		if (flags & QMAN_ENQUEUE_FLAG_WAIT_INT)
-+			/* NB: return success even if signal occurs before
-+			 * condition is true. pvb_commit guarantees success */
-+			wait_event_interruptible(affine_queue,
-+					(p->eqci_owned != fq));
-+		else
-+			wait_event(affine_queue, (p->eqci_owned != fq));
-+	}
-+#endif
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_enqueue);
-+
-+int qman_p_enqueue_orp(struct qman_portal *p, struct qman_fq *fq,
-+				const struct qm_fd *fd, u32 flags,
-+				struct qman_fq *orp, u16 orp_seqnum)
-+{
-+	struct qm_eqcr_entry *eq;
-+	unsigned long irqflags __maybe_unused;
-+
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+	if (flags & QMAN_ENQUEUE_FLAG_WAIT)
-+		eq = wait_p_eq_start(p, &irqflags, fq, fd, flags);
-+	else
-+#endif
-+	eq = try_p_eq_start(p, &irqflags, fq, fd, flags);
-+	if (!eq)
-+		return -EBUSY;
-+	/* Process ORP-specifics here */
-+	if (flags & QMAN_ENQUEUE_FLAG_NLIS)
-+		orp_seqnum |= QM_EQCR_SEQNUM_NLIS;
-+	else {
-+		orp_seqnum &= ~QM_EQCR_SEQNUM_NLIS;
-+		if (flags & QMAN_ENQUEUE_FLAG_NESN)
-+			orp_seqnum |= QM_EQCR_SEQNUM_NESN;
-+		else
-+			/* No need to check 4 QMAN_ENQUEUE_FLAG_HOLE */
-+			orp_seqnum &= ~QM_EQCR_SEQNUM_NESN;
-+	}
-+	eq->seqnum = cpu_to_be16(orp_seqnum);
-+	eq->orp = cpu_to_be32(orp->fqid);
-+	/* Note: QM_EQCR_VERB_INTERRUPT == QMAN_ENQUEUE_FLAG_WAIT_SYNC */
-+	qm_eqcr_pvb_commit(&p->p, QM_EQCR_VERB_ORP |
-+		((flags & (QMAN_ENQUEUE_FLAG_HOLE | QMAN_ENQUEUE_FLAG_NESN)) ?
-+				0 : QM_EQCR_VERB_CMD_ENQUEUE) |
-+		(flags & (QM_EQCR_VERB_COLOUR_MASK | QM_EQCR_VERB_INTERRUPT)));
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	if (unlikely((flags & QMAN_ENQUEUE_FLAG_WAIT) &&
-+			(flags & QMAN_ENQUEUE_FLAG_WAIT_SYNC))) {
-+		if (flags & QMAN_ENQUEUE_FLAG_WAIT_INT)
-+			/* NB: return success even if signal occurs before
-+			 * condition is true. pvb_commit guarantees success */
-+			wait_event_interruptible(affine_queue,
-+					(p->eqci_owned != fq));
-+		else
-+			wait_event(affine_queue, (p->eqci_owned != fq));
-+	}
-+#endif
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_p_enqueue_orp);
-+
-+int qman_enqueue_orp(struct qman_fq *fq, const struct qm_fd *fd, u32 flags,
-+			struct qman_fq *orp, u16 orp_seqnum)
-+{
-+	struct qman_portal *p;
-+	struct qm_eqcr_entry *eq;
-+	unsigned long irqflags __maybe_unused;
-+
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+	if (flags & QMAN_ENQUEUE_FLAG_WAIT)
-+		eq = wait_eq_start(&p, &irqflags, fq, fd, flags);
-+	else
-+#endif
-+	eq = try_eq_start(&p, &irqflags, fq, fd, flags);
-+	if (!eq)
-+		return -EBUSY;
-+	/* Process ORP-specifics here */
-+	if (flags & QMAN_ENQUEUE_FLAG_NLIS)
-+		orp_seqnum |= QM_EQCR_SEQNUM_NLIS;
-+	else {
-+		orp_seqnum &= ~QM_EQCR_SEQNUM_NLIS;
-+		if (flags & QMAN_ENQUEUE_FLAG_NESN)
-+			orp_seqnum |= QM_EQCR_SEQNUM_NESN;
-+		else
-+			/* No need to check 4 QMAN_ENQUEUE_FLAG_HOLE */
-+			orp_seqnum &= ~QM_EQCR_SEQNUM_NESN;
-+	}
-+	eq->seqnum = cpu_to_be16(orp_seqnum);
-+	eq->orp = cpu_to_be32(orp->fqid);
-+	/* Note: QM_EQCR_VERB_INTERRUPT == QMAN_ENQUEUE_FLAG_WAIT_SYNC */
-+	qm_eqcr_pvb_commit(&p->p, QM_EQCR_VERB_ORP |
-+		((flags & (QMAN_ENQUEUE_FLAG_HOLE | QMAN_ENQUEUE_FLAG_NESN)) ?
-+				0 : QM_EQCR_VERB_CMD_ENQUEUE) |
-+		(flags & (QM_EQCR_VERB_COLOUR_MASK | QM_EQCR_VERB_INTERRUPT)));
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	if (unlikely((flags & QMAN_ENQUEUE_FLAG_WAIT) &&
-+			(flags & QMAN_ENQUEUE_FLAG_WAIT_SYNC))) {
-+		if (flags & QMAN_ENQUEUE_FLAG_WAIT_INT)
-+			/* NB: return success even if signal occurs before
-+			 * condition is true. pvb_commit guarantees success */
-+			wait_event_interruptible(affine_queue,
-+					(p->eqci_owned != fq));
-+		else
-+			wait_event(affine_queue, (p->eqci_owned != fq));
-+	}
-+#endif
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_enqueue_orp);
-+
-+int qman_p_enqueue_precommit(struct qman_portal *p, struct qman_fq *fq,
-+				const struct qm_fd *fd, u32 flags,
-+				qman_cb_precommit cb, void *cb_arg)
-+{
-+	struct qm_eqcr_entry *eq;
-+	unsigned long irqflags __maybe_unused;
-+
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+	if (flags & QMAN_ENQUEUE_FLAG_WAIT)
-+		eq = wait_p_eq_start(p, &irqflags, fq, fd, flags);
-+	else
-+#endif
-+	eq = try_p_eq_start(p, &irqflags, fq, fd, flags);
-+	if (!eq)
-+		return -EBUSY;
-+	/* invoke user supplied callback function before writing commit verb */
-+	if (cb(cb_arg)) {
-+		PORTAL_IRQ_UNLOCK(p, irqflags);
-+		return -EINVAL;
-+	}
-+	/* Note: QM_EQCR_VERB_INTERRUPT == QMAN_ENQUEUE_FLAG_WAIT_SYNC */
-+	qm_eqcr_pvb_commit(&p->p, QM_EQCR_VERB_CMD_ENQUEUE |
-+		(flags & (QM_EQCR_VERB_COLOUR_MASK | QM_EQCR_VERB_INTERRUPT)));
-+	/* Factor the below out, it's used from qman_enqueue_orp() too */
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	if (unlikely((flags & QMAN_ENQUEUE_FLAG_WAIT) &&
-+			(flags & QMAN_ENQUEUE_FLAG_WAIT_SYNC))) {
-+		if (flags & QMAN_ENQUEUE_FLAG_WAIT_INT)
-+			/* NB: return success even if signal occurs before
-+			 * condition is true. pvb_commit guarantees success */
-+			wait_event_interruptible(affine_queue,
-+					(p->eqci_owned != fq));
-+		else
-+			wait_event(affine_queue, (p->eqci_owned != fq));
-+	}
-+#endif
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_p_enqueue_precommit);
-+
-+int qman_enqueue_precommit(struct qman_fq *fq, const struct qm_fd *fd,
-+		u32 flags, qman_cb_precommit cb, void *cb_arg)
-+{
-+	struct qman_portal *p;
-+	struct qm_eqcr_entry *eq;
-+	unsigned long irqflags __maybe_unused;
-+
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+	if (flags & QMAN_ENQUEUE_FLAG_WAIT)
-+		eq = wait_eq_start(&p, &irqflags, fq, fd, flags);
-+	else
-+#endif
-+	eq = try_eq_start(&p, &irqflags, fq, fd, flags);
-+	if (!eq)
-+		return -EBUSY;
-+	/* invoke user supplied callback function before writing commit verb */
-+	if (cb(cb_arg)) {
-+		PORTAL_IRQ_UNLOCK(p, irqflags);
-+		put_affine_portal();
-+		return -EINVAL;
-+	}
-+	/* Note: QM_EQCR_VERB_INTERRUPT == QMAN_ENQUEUE_FLAG_WAIT_SYNC */
-+	qm_eqcr_pvb_commit(&p->p, QM_EQCR_VERB_CMD_ENQUEUE |
-+		(flags & (QM_EQCR_VERB_COLOUR_MASK | QM_EQCR_VERB_INTERRUPT)));
-+	/* Factor the below out, it's used from qman_enqueue_orp() too */
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+	if (unlikely((flags & QMAN_ENQUEUE_FLAG_WAIT) &&
-+			(flags & QMAN_ENQUEUE_FLAG_WAIT_SYNC))) {
-+		if (flags & QMAN_ENQUEUE_FLAG_WAIT_INT)
-+			/* NB: return success even if signal occurs before
-+			 * condition is true. pvb_commit guarantees success */
-+			wait_event_interruptible(affine_queue,
-+					(p->eqci_owned != fq));
-+		else
-+			wait_event(affine_queue, (p->eqci_owned != fq));
-+	}
-+#endif
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_enqueue_precommit);
-+
-+int qman_modify_cgr(struct qman_cgr *cgr, u32 flags,
-+			struct qm_mcc_initcgr *opts)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p = get_affine_portal();
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+	u8 verb = QM_MCC_VERB_MODIFYCGR;
-+
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	mcc = qm_mc_start(&p->p);
-+	if (opts)
-+		mcc->initcgr = *opts;
-+	mcc->initcgr.we_mask = cpu_to_be16(mcc->initcgr.we_mask);
-+	mcc->initcgr.cgr.wr_parm_g.word =
-+		cpu_to_be32(mcc->initcgr.cgr.wr_parm_g.word);
-+	mcc->initcgr.cgr.wr_parm_y.word =
-+		cpu_to_be32(mcc->initcgr.cgr.wr_parm_y.word);
-+	mcc->initcgr.cgr.wr_parm_r.word =
-+		cpu_to_be32(mcc->initcgr.cgr.wr_parm_r.word);
-+	mcc->initcgr.cgr.cscn_targ =  cpu_to_be32(mcc->initcgr.cgr.cscn_targ);
-+	mcc->initcgr.cgr.__cs_thres = cpu_to_be16(mcc->initcgr.cgr.__cs_thres);
-+
-+	mcc->initcgr.cgid = cgr->cgrid;
-+	if (flags & QMAN_CGR_FLAG_USE_INIT)
-+		verb = QM_MCC_VERB_INITCGR;
-+	qm_mc_commit(&p->p, verb);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == verb);
-+	res = mcr->result;
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	return (res == QM_MCR_RESULT_OK) ? 0 : -EIO;
-+}
-+EXPORT_SYMBOL(qman_modify_cgr);
-+
-+#define TARG_MASK(n) (0x80000000 >> (n->config->public_cfg.channel - \
-+					QM_CHANNEL_SWPORTAL0))
-+#define TARG_DCP_MASK(n) (0x80000000 >> (10 + n))
-+#define PORTAL_IDX(n) (n->config->public_cfg.channel - QM_CHANNEL_SWPORTAL0)
-+
-+static u8 qman_cgr_cpus[__CGR_NUM];
-+
-+int qman_create_cgr(struct qman_cgr *cgr, u32 flags,
-+			struct qm_mcc_initcgr *opts)
-+{
-+	unsigned long irqflags __maybe_unused;
-+	struct qm_mcr_querycgr cgr_state;
-+	struct qm_mcc_initcgr local_opts;
-+	int ret;
-+	struct qman_portal *p;
-+
-+	/* We have to check that the provided CGRID is within the limits of the
-+	 * data-structures, for obvious reasons. However we'll let h/w take
-+	 * care of determining whether it's within the limits of what exists on
-+	 * the SoC. */
-+	if (cgr->cgrid >= __CGR_NUM)
-+		return -EINVAL;
-+
-+	preempt_disable();
-+	p = get_affine_portal();
-+	qman_cgr_cpus[cgr->cgrid] = smp_processor_id();
-+	preempt_enable();
-+
-+	memset(&local_opts, 0, sizeof(struct qm_mcc_initcgr));
-+	cgr->chan = p->config->public_cfg.channel;
-+	spin_lock_irqsave(&p->cgr_lock, irqflags);
-+
-+	/* if no opts specified, just add it to the list */
-+	if (!opts)
-+		goto add_list;
-+
-+	ret = qman_query_cgr(cgr, &cgr_state);
-+	if (ret)
-+		goto release_lock;
-+	if (opts)
-+		local_opts = *opts;
-+	if ((qman_ip_rev & 0xFF00) >= QMAN_REV30)
-+		local_opts.cgr.cscn_targ_upd_ctrl =
-+			QM_CGR_TARG_UDP_CTRL_WRITE_BIT | PORTAL_IDX(p);
-+	else
-+		/* Overwrite TARG */
-+		local_opts.cgr.cscn_targ = cgr_state.cgr.cscn_targ |
-+							TARG_MASK(p);
-+	local_opts.we_mask |= QM_CGR_WE_CSCN_TARG;
-+
-+	/* send init if flags indicate so */
-+	if (opts && (flags & QMAN_CGR_FLAG_USE_INIT))
-+		ret = qman_modify_cgr(cgr, QMAN_CGR_FLAG_USE_INIT, &local_opts);
-+	else
-+		ret = qman_modify_cgr(cgr, 0, &local_opts);
-+	if (ret)
-+		goto release_lock;
-+add_list:
-+	list_add(&cgr->node, &p->cgr_cbs);
-+
-+	/* Determine if newly added object requires its callback to be called */
-+	ret = qman_query_cgr(cgr, &cgr_state);
-+	if (ret) {
-+		/* we can't go back, so proceed and return success, but screen
-+		 * and wail to the log file */
-+		pr_crit("CGR HW state partially modified\n");
-+		ret = 0;
-+		goto release_lock;
-+	}
-+	if (cgr->cb && cgr_state.cgr.cscn_en && qman_cgrs_get(&p->cgrs[1],
-+							cgr->cgrid))
-+		cgr->cb(p, cgr, 1);
-+release_lock:
-+	spin_unlock_irqrestore(&p->cgr_lock, irqflags);
-+	put_affine_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_create_cgr);
-+
-+int qman_create_cgr_to_dcp(struct qman_cgr *cgr, u32 flags, u16 dcp_portal,
-+					struct qm_mcc_initcgr *opts)
-+{
-+	unsigned long irqflags __maybe_unused;
-+	struct qm_mcc_initcgr local_opts;
-+	struct qm_mcr_querycgr cgr_state;
-+	int ret;
-+
-+	if ((qman_ip_rev & 0xFF00) < QMAN_REV30) {
-+		pr_warn("This QMan version doesn't support to send CSCN to DCP portal\n");
-+		return -EINVAL;
-+	}
-+	/* We have to check that the provided CGRID is within the limits of the
-+	 * data-structures, for obvious reasons. However we'll let h/w take
-+	 * care of determining whether it's within the limits of what exists on
-+	 * the SoC.
-+	 */
-+	if (cgr->cgrid >= __CGR_NUM)
-+		return -EINVAL;
-+
-+	ret = qman_query_cgr(cgr, &cgr_state);
-+	if (ret)
-+		return ret;
-+
-+	memset(&local_opts, 0, sizeof(struct qm_mcc_initcgr));
-+	if (opts)
-+		local_opts = *opts;
-+
-+	if ((qman_ip_rev & 0xFF00) >= QMAN_REV30)
-+		local_opts.cgr.cscn_targ_upd_ctrl =
-+				QM_CGR_TARG_UDP_CTRL_WRITE_BIT |
-+				QM_CGR_TARG_UDP_CTRL_DCP | dcp_portal;
-+	else
-+		local_opts.cgr.cscn_targ = cgr_state.cgr.cscn_targ |
-+					TARG_DCP_MASK(dcp_portal);
-+	local_opts.we_mask |= QM_CGR_WE_CSCN_TARG;
-+
-+	/* send init if flags indicate so */
-+	if (opts && (flags & QMAN_CGR_FLAG_USE_INIT))
-+		ret = qman_modify_cgr(cgr, QMAN_CGR_FLAG_USE_INIT,
-+							&local_opts);
-+	else
-+		ret = qman_modify_cgr(cgr, 0, &local_opts);
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_create_cgr_to_dcp);
-+
-+int qman_delete_cgr(struct qman_cgr *cgr)
-+{
-+	unsigned long irqflags __maybe_unused;
-+	struct qm_mcr_querycgr cgr_state;
-+	struct qm_mcc_initcgr local_opts;
-+	int ret = 0;
-+	struct qman_cgr *i;
-+	struct qman_portal *p = get_affine_portal();
-+
-+	if (cgr->chan != p->config->public_cfg.channel) {
-+		pr_crit("Attempting to delete cgr from different portal "
-+			"than it was create: create 0x%x, delete 0x%x\n",
-+			cgr->chan, p->config->public_cfg.channel);
-+		ret = -EINVAL;
-+		goto put_portal;
-+	}
-+	memset(&local_opts, 0, sizeof(struct qm_mcc_initcgr));
-+	spin_lock_irqsave(&p->cgr_lock, irqflags);
-+	list_del(&cgr->node);
-+	/*
-+	 * If there are no other CGR objects for this CGRID in the list, update
-+	 * CSCN_TARG accordingly
-+	 */
-+	list_for_each_entry(i, &p->cgr_cbs, node)
-+		if ((i->cgrid == cgr->cgrid) && i->cb)
-+			goto release_lock;
-+	ret = qman_query_cgr(cgr, &cgr_state);
-+	if (ret)  {
-+		/* add back to the list */
-+		list_add(&cgr->node, &p->cgr_cbs);
-+		goto release_lock;
-+	}
-+	/* Overwrite TARG */
-+	local_opts.we_mask = QM_CGR_WE_CSCN_TARG;
-+	if ((qman_ip_rev & 0xFF00) >= QMAN_REV30)
-+		local_opts.cgr.cscn_targ_upd_ctrl = PORTAL_IDX(p);
-+	else
-+		local_opts.cgr.cscn_targ = cgr_state.cgr.cscn_targ &
-+							 ~(TARG_MASK(p));
-+	ret = qman_modify_cgr(cgr, 0, &local_opts);
-+	if (ret)
-+		/* add back to the list */
-+		list_add(&cgr->node, &p->cgr_cbs);
-+release_lock:
-+	spin_unlock_irqrestore(&p->cgr_lock, irqflags);
-+put_portal:
-+	put_affine_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_delete_cgr);
-+
-+struct cgr_comp {
-+	struct qman_cgr *cgr;
-+	struct completion completion;
-+};
-+
-+static int qman_delete_cgr_thread(void *p)
-+{
-+	struct cgr_comp *cgr_comp = (struct cgr_comp *)p;
-+	int res;
-+
-+	res = qman_delete_cgr((struct qman_cgr *)cgr_comp->cgr);
-+	complete(&cgr_comp->completion);
-+
-+	return res;
-+}
-+
-+void qman_delete_cgr_safe(struct qman_cgr *cgr)
-+{
-+	struct task_struct *thread;
-+	struct cgr_comp cgr_comp;
-+
-+	preempt_disable();
-+	if (qman_cgr_cpus[cgr->cgrid] != smp_processor_id()) {
-+		init_completion(&cgr_comp.completion);
-+		cgr_comp.cgr = cgr;
-+		thread = kthread_create(qman_delete_cgr_thread, &cgr_comp,
-+					"cgr_del");
-+
-+		if (likely(!IS_ERR(thread))) {
-+			kthread_bind(thread, qman_cgr_cpus[cgr->cgrid]);
-+			wake_up_process(thread);
-+			wait_for_completion(&cgr_comp.completion);
-+			preempt_enable();
-+			return;
-+		}
-+	}
-+	qman_delete_cgr(cgr);
-+	preempt_enable();
-+}
-+EXPORT_SYMBOL(qman_delete_cgr_safe);
-+
-+int qm_get_clock(u64 *clock_hz)
-+{
-+	if (!qman_clk) {
-+		pr_warn("Qman clock speed is unknown\n");
-+		return  -EINVAL;
-+	}
-+	*clock_hz = (u64)qman_clk;
-+	return 0;
-+}
-+EXPORT_SYMBOL(qm_get_clock);
-+
-+int qm_set_clock(u64 clock_hz)
-+{
-+	if (qman_clk)
-+		return -1;
-+	qman_clk = (u32)clock_hz;
-+		return 0;
-+}
-+EXPORT_SYMBOL(qm_set_clock);
-+
-+/* CEETM management command */
-+static int qman_ceetm_configure_lfqmt(struct qm_mcc_ceetm_lfqmt_config *opts)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	mcc->lfqmt_config = *opts;
-+	qm_mc_commit(&p->p, QM_CEETM_VERB_LFQMT_CONFIG);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) ==
-+					 QM_CEETM_VERB_LFQMT_CONFIG);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+
-+	res = mcr->result;
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CEETM: CONFIGURE LFQMT failed\n");
-+		return -EIO;
-+	}
-+	return 0;
-+}
-+
-+int qman_ceetm_query_lfqmt(int lfqid,
-+			   struct qm_mcr_ceetm_lfqmt_query *lfqmt_query)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	mcc->lfqmt_query.lfqid = lfqid;
-+	qm_mc_commit(&p->p, QM_CEETM_VERB_LFQMT_QUERY);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_CEETM_VERB_LFQMT_QUERY);
-+	res = mcr->result;
-+	if (res == QM_MCR_RESULT_OK)
-+		*lfqmt_query = mcr->lfqmt_query;
-+
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CEETM: QUERY LFQMT failed\n");
-+		return -EIO;
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_query_lfqmt);
-+
-+static int qman_ceetm_configure_cq(struct qm_mcc_ceetm_cq_config *opts)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	mcc->cq_config = *opts;
-+	qm_mc_commit(&p->p, QM_CEETM_VERB_CQ_CONFIG);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	res = mcr->result;
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_CEETM_VERB_CQ_CONFIG);
-+
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CEETM: CONFIGURE CQ failed\n");
-+		return -EIO;
-+	}
-+	return 0;
-+}
-+
-+int qman_ceetm_query_cq(unsigned int cqid, unsigned int dcpid,
-+				struct qm_mcr_ceetm_cq_query *cq_query)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	mcc->cq_query.cqid = cpu_to_be16(cqid);
-+	mcc->cq_query.dcpid = dcpid;
-+	qm_mc_commit(&p->p, QM_CEETM_VERB_CQ_QUERY);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_CEETM_VERB_CQ_QUERY);
-+	res = mcr->result;
-+	if (res == QM_MCR_RESULT_OK) {
-+		*cq_query = mcr->cq_query;
-+		hw_cq_query_to_cpu(cq_query);
-+	}
-+
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CEETM: QUERY CQ failed\n");
-+		return -EIO;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_query_cq);
-+
-+static int qman_ceetm_configure_dct(struct qm_mcc_ceetm_dct_config *opts)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	mcc->dct_config = *opts;
-+	qm_mc_commit(&p->p, QM_CEETM_VERB_DCT_CONFIG);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_CEETM_VERB_DCT_CONFIG);
-+	res = mcr->result;
-+
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CEETM: CONFIGURE DCT failed\n");
-+		return -EIO;
-+	}
-+	return 0;
-+}
-+
-+static int qman_ceetm_query_dct(struct qm_mcc_ceetm_dct_query *opts,
-+			 struct qm_mcr_ceetm_dct_query *dct_query)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p = get_affine_portal();
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	mcc->dct_query = *opts;
-+	qm_mc_commit(&p->p, QM_CEETM_VERB_DCT_QUERY);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_CEETM_VERB_DCT_QUERY);
-+	res = mcr->result;
-+
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CEETM: QUERY DCT failed\n");
-+		return -EIO;
-+	}
-+
-+	*dct_query = mcr->dct_query;
-+	return 0;
-+}
-+
-+static int qman_ceetm_configure_class_scheduler(
-+			struct qm_mcc_ceetm_class_scheduler_config *opts)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	mcc->csch_config = *opts;
-+	qm_mc_commit(&p->p, QM_CEETM_VERB_CLASS_SCHEDULER_CONFIG);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) ==
-+					QM_CEETM_VERB_CLASS_SCHEDULER_CONFIG);
-+	res = mcr->result;
-+
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CEETM: CONFIGURE CLASS SCHEDULER failed\n");
-+		return -EIO;
-+	}
-+	return 0;
-+}
-+
-+static int qman_ceetm_query_class_scheduler(struct qm_ceetm_channel *channel,
-+			struct qm_mcr_ceetm_class_scheduler_query *query)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	mcc->csch_query.cqcid = cpu_to_be16(channel->idx);
-+	mcc->csch_query.dcpid = channel->dcp_idx;
-+	qm_mc_commit(&p->p, QM_CEETM_VERB_CLASS_SCHEDULER_QUERY);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) ==
-+				QM_CEETM_VERB_CLASS_SCHEDULER_QUERY);
-+	res = mcr->result;
-+
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CEETM: QUERY CLASS SCHEDULER failed\n");
-+		return -EIO;
-+	}
-+	*query = mcr->csch_query;
-+	return 0;
-+}
-+
-+static int qman_ceetm_configure_mapping_shaper_tcfc(
-+		struct qm_mcc_ceetm_mapping_shaper_tcfc_config *opts)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	mcc->mst_config = *opts;
-+	qm_mc_commit(&p->p, QM_CEETM_VERB_MAPPING_SHAPER_TCFC_CONFIG);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) ==
-+				QM_CEETM_VERB_MAPPING_SHAPER_TCFC_CONFIG);
-+	res = mcr->result;
-+
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CEETM: CONFIGURE CHANNEL MAPPING failed\n");
-+		return -EIO;
-+	}
-+	return 0;
-+}
-+
-+static int qman_ceetm_query_mapping_shaper_tcfc(
-+		struct qm_mcc_ceetm_mapping_shaper_tcfc_query *opts,
-+		struct qm_mcr_ceetm_mapping_shaper_tcfc_query *response)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	mcc->mst_query = *opts;
-+	qm_mc_commit(&p->p, QM_CEETM_VERB_MAPPING_SHAPER_TCFC_QUERY);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) ==
-+				QM_CEETM_VERB_MAPPING_SHAPER_TCFC_QUERY);
-+	res = mcr->result;
-+
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CEETM: QUERY CHANNEL MAPPING failed\n");
-+		return -EIO;
-+	}
-+
-+	*response = mcr->mst_query;
-+	return 0;
-+}
-+
-+static int qman_ceetm_configure_ccgr(struct qm_mcc_ceetm_ccgr_config *opts)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	mcc->ccgr_config = *opts;
-+
-+	qm_mc_commit(&p->p, QM_CEETM_VERB_CCGR_CONFIG);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_CEETM_VERB_CCGR_CONFIG);
-+
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+
-+	res = mcr->result;
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CEETM: CONFIGURE CCGR failed\n");
-+		return -EIO;
-+	}
-+	return 0;
-+}
-+
-+int qman_ceetm_query_ccgr(struct qm_mcc_ceetm_ccgr_query *ccgr_query,
-+				struct qm_mcr_ceetm_ccgr_query *response)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	mcc->ccgr_query.ccgrid = cpu_to_be16(ccgr_query->ccgrid);
-+	mcc->ccgr_query.dcpid = ccgr_query->dcpid;
-+	qm_mc_commit(&p->p, QM_CEETM_VERB_CCGR_QUERY);
-+
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_CEETM_VERB_CCGR_QUERY);
-+	res = mcr->result;
-+	if (res == QM_MCR_RESULT_OK) {
-+		*response = mcr->ccgr_query;
-+		hw_ccgr_query_to_cpu(response);
-+	}
-+
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CEETM: QUERY CCGR failed\n");
-+		return -EIO;
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_query_ccgr);
-+
-+static int qman_ceetm_cq_peek_pop_xsfdrread(struct qm_ceetm_cq *cq,
-+			u8 command_type, u16 xsfdr,
-+			struct qm_mcr_ceetm_cq_peek_pop_xsfdrread *cq_ppxr)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	switch (command_type) {
-+	case 0:
-+	case 1:
-+		mcc->cq_ppxr.cqid = (cq->parent->idx << 4) | cq->idx;
-+		break;
-+	case 2:
-+		mcc->cq_ppxr.xsfdr = xsfdr;
-+		break;
-+	default:
-+		break;
-+	}
-+	mcc->cq_ppxr.ct = command_type;
-+	mcc->cq_ppxr.dcpid = cq->parent->dcp_idx;
-+	qm_mc_commit(&p->p, QM_CEETM_VERB_CQ_PEEK_POP_XFDRREAD);
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) ==
-+				QM_CEETM_VERB_CQ_PEEK_POP_XFDRREAD);
-+
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+
-+	res = mcr->result;
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CEETM: CQ PEEK/POP/XSFDR READ failed\n");
-+		return -EIO;
-+	}
-+	*cq_ppxr = mcr->cq_ppxr;
-+	return 0;
-+}
-+
-+static int qman_ceetm_query_statistics(u16 cid,
-+			enum qm_dc_portal dcp_idx,
-+			u16 command_type,
-+			struct qm_mcr_ceetm_statistics_query *query_result)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	mcc->stats_query_write.cid = cid;
-+	mcc->stats_query_write.dcpid = dcp_idx;
-+	mcc->stats_query_write.ct = command_type;
-+	qm_mc_commit(&p->p, QM_CEETM_VERB_STATISTICS_QUERY_WRITE);
-+
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) ==
-+					 QM_CEETM_VERB_STATISTICS_QUERY_WRITE);
-+
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+
-+	res = mcr->result;
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CEETM: STATISTICS QUERY failed\n");
-+		return -EIO;
-+	}
-+	*query_result = mcr->stats_query;
-+	return 0;
-+}
-+
-+int qman_ceetm_query_write_statistics(u16 cid, enum qm_dc_portal dcp_idx,
-+				      u16 command_type, u64 frame_count,
-+				      u64 byte_count)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	mcc->stats_query_write.cid = cid;
-+	mcc->stats_query_write.dcpid = dcp_idx;
-+	mcc->stats_query_write.ct = command_type;
-+	mcc->stats_query_write.frm_cnt = frame_count;
-+	mcc->stats_query_write.byte_cnt = byte_count;
-+	qm_mc_commit(&p->p, QM_CEETM_VERB_STATISTICS_QUERY_WRITE);
-+
-+	while (!(mcr = qm_mc_result(&p->p)))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) ==
-+					 QM_CEETM_VERB_STATISTICS_QUERY_WRITE);
-+
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+
-+	res = mcr->result;
-+	if (res != QM_MCR_RESULT_OK) {
-+		pr_err("CEETM: STATISTICS WRITE failed\n");
-+		return -EIO;
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_query_write_statistics);
-+
-+int qman_ceetm_bps2tokenrate(u64 bps, struct qm_ceetm_rate *token_rate,
-+							int rounding)
-+{
-+	u16 pres;
-+	u64 temp;
-+	u64 qman_freq;
-+	int ret;
-+
-+	/* Read PRES from CEET_CFG_PRES register */
-+	ret = qman_ceetm_get_prescaler(&pres);
-+	if (ret)
-+		return -EINVAL;
-+
-+	ret = qm_get_clock(&qman_freq);
-+	if (ret)
-+		return -EINVAL;
-+
-+	/* token-rate = bytes-per-second * update-reference-period
-+	 *
-+	 * Where token-rate is N/8192 for a integer N, and
-+	 * update-reference-period is (2^22)/(PRES*QHz), where PRES
-+	 * is the prescalar value and QHz is the QMan clock frequency.
-+	 * So:
-+	 *
-+	 * token-rate = (byte-per-second*2^22)/PRES*QHZ)
-+	 *
-+	 * Converting to bits-per-second gives;
-+	 *
-+	 *	token-rate = (bps*2^19) / (PRES*QHZ)
-+	 *	N = (bps*2^32) / (PRES*QHz)
-+	 *
-+	 * And to avoid 64-bit overflow if 'bps' is larger than 4Gbps
-+	 * (yet minimise rounding error if 'bps' is small), we reorganise
-+	 * the formula to use two 16-bit shifts rather than 1 32-bit shift.
-+	 *      N = (((bps*2^16)/PRES)*2^16)/QHz
-+	 */
-+	temp = ROUNDING((bps << 16), pres, rounding);
-+	temp = ROUNDING((temp << 16), qman_freq, rounding);
-+	token_rate->whole = temp >> 13;
-+	token_rate->fraction = temp & (((u64)1 << 13) - 1);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_bps2tokenrate);
-+
-+int qman_ceetm_tokenrate2bps(const struct qm_ceetm_rate *token_rate, u64 *bps,
-+							int rounding)
-+{
-+	u16 pres;
-+	u64 temp;
-+	u64 qman_freq;
-+	int ret;
-+
-+	/* Read PRES from CEET_CFG_PRES register */
-+	ret = qman_ceetm_get_prescaler(&pres);
-+	if (ret)
-+		return -EINVAL;
-+
-+	ret = qm_get_clock(&qman_freq);
-+	if (ret)
-+		return -EINVAL;
-+
-+	/* bytes-per-second = token-rate / update-reference-period
-+	 *
-+	 * where "token-rate" is N/8192 for an integer N, and
-+	 * "update-reference-period" is (2^22)/(PRES*QHz), where PRES is
-+	 * the prescalar value and QHz is the QMan clock frequency. So;
-+	 *
-+	 * bytes-per-second = (N/8192) / (4194304/PRES*QHz)
-+	 *                  = N*PRES*QHz / (4194304*8192)
-+	 *                  = N*PRES*QHz / (2^35)
-+	 *
-+	 * Converting to bits-per-second gives;
-+	 *
-+	 *             bps = N*PRES*QHZ / (2^32)
-+	 *
-+	 * Note, the numerator has a maximum width of 72 bits! So to
-+	 * avoid 64-bit overflow errors, we calculate PRES*QHZ (maximum
-+	 * width 48 bits) divided by 2^9 (reducing to maximum 39 bits), before
-+	 * multiplying by N (goes to maximum of 63 bits).
-+	 *
-+	 *             temp = PRES*QHZ / (2^16)
-+	 *             kbps = temp*N / (2^16)
-+	 */
-+	temp = ROUNDING(qman_freq * pres, (u64)1 << 16 , rounding);
-+	temp *= ((token_rate->whole << 13) + token_rate->fraction);
-+	*bps = ROUNDING(temp, (u64)(1) << 16, rounding);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_tokenrate2bps);
-+
-+int qman_ceetm_sp_claim(struct qm_ceetm_sp **sp, enum qm_dc_portal dcp_idx,
-+						unsigned int sp_idx)
-+{
-+	struct qm_ceetm_sp *p;
-+
-+	DPA_ASSERT((dcp_idx ==  qm_dc_portal_fman0) ||
-+			(dcp_idx == qm_dc_portal_fman1));
-+
-+	if ((sp_idx < qman_ceetms[dcp_idx].sp_range[0]) ||
-+		(sp_idx >= (qman_ceetms[dcp_idx].sp_range[0] +
-+		qman_ceetms[dcp_idx].sp_range[1]))) {
-+		pr_err("Sub-portal index doesn't exist\n");
-+		return -EINVAL;
-+	}
-+
-+	list_for_each_entry(p, &qman_ceetms[dcp_idx].sub_portals, node) {
-+		if ((p->idx == sp_idx) && (p->is_claimed == 0)) {
-+			p->is_claimed = 1;
-+			*sp = p;
-+			return 0;
-+		}
-+	}
-+	pr_err("The sub-portal#%d is not available!\n", sp_idx);
-+	return -ENODEV;
-+}
-+EXPORT_SYMBOL(qman_ceetm_sp_claim);
-+
-+int qman_ceetm_sp_release(struct qm_ceetm_sp *sp)
-+{
-+	struct qm_ceetm_sp *p;
-+
-+	if (sp->lni && sp->lni->is_claimed == 1) {
-+		pr_err("The dependency of sub-portal has not been released!\n");
-+		return -EBUSY;
-+	}
-+
-+	list_for_each_entry(p, &qman_ceetms[sp->dcp_idx].sub_portals, node) {
-+		if (p->idx == sp->idx) {
-+			p->is_claimed = 0;
-+			p->lni = NULL;
-+		}
-+	}
-+	/* Disable CEETM mode of this sub-portal */
-+	qman_sp_disable_ceetm_mode(sp->dcp_idx, sp->idx);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_sp_release);
-+
-+int qman_ceetm_lni_claim(struct qm_ceetm_lni **lni, enum qm_dc_portal dcp_idx,
-+							unsigned int lni_idx)
-+{
-+	struct qm_ceetm_lni *p;
-+
-+	if ((lni_idx < qman_ceetms[dcp_idx].lni_range[0]) ||
-+		(lni_idx >= (qman_ceetms[dcp_idx].lni_range[0] +
-+		qman_ceetms[dcp_idx].lni_range[1]))) {
-+		pr_err("The lni index is out of range\n");
-+		return -EINVAL;
-+	}
-+
-+	list_for_each_entry(p, &qman_ceetms[dcp_idx].lnis, node) {
-+		if ((p->idx == lni_idx) && (p->is_claimed == 0)) {
-+			*lni = p;
-+			p->is_claimed = 1;
-+			return 0;
-+		}
-+	}
-+
-+	pr_err("The LNI#%d is not available!\n", lni_idx);
-+	return -EINVAL;
-+}
-+EXPORT_SYMBOL(qman_ceetm_lni_claim);
-+
-+int qman_ceetm_lni_release(struct qm_ceetm_lni *lni)
-+{
-+	struct qm_ceetm_lni *p;
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_config config_opts;
-+
-+	if (!list_empty(&lni->channels)) {
-+		pr_err("The LNI dependencies are not released!\n");
-+		return -EBUSY;
-+	}
-+
-+	list_for_each_entry(p, &qman_ceetms[lni->dcp_idx].lnis, node) {
-+		if (p->idx == lni->idx) {
-+			p->shaper_enable = 0;
-+			p->shaper_couple = 0;
-+			p->cr_token_rate.whole = 0;
-+			p->cr_token_rate.fraction = 0;
-+			p->er_token_rate.whole = 0;
-+			p->er_token_rate.fraction = 0;
-+			p->cr_token_bucket_limit = 0;
-+			p->er_token_bucket_limit = 0;
-+			p->is_claimed = 0;
-+		}
-+	}
-+	config_opts.cid = cpu_to_be16(CEETM_COMMAND_LNI_SHAPER | lni->idx);
-+	config_opts.dcpid = lni->dcp_idx;
-+	memset(&config_opts.shaper_config, 0,
-+				sizeof(config_opts.shaper_config));
-+	return qman_ceetm_configure_mapping_shaper_tcfc(&config_opts);
-+}
-+EXPORT_SYMBOL(qman_ceetm_lni_release);
-+
-+int qman_ceetm_sp_set_lni(struct qm_ceetm_sp *sp, struct qm_ceetm_lni *lni)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_config config_opts;
-+
-+	config_opts.cid = cpu_to_be16(CEETM_COMMAND_SP_MAPPING | sp->idx);
-+	config_opts.dcpid = sp->dcp_idx;
-+	config_opts.sp_mapping.map_lni_id = lni->idx;
-+	sp->lni = lni;
-+
-+	if (qman_ceetm_configure_mapping_shaper_tcfc(&config_opts))
-+		return -EINVAL;
-+
-+	/* Enable CEETM mode for this sub-portal */
-+	return qman_sp_enable_ceetm_mode(sp->dcp_idx, sp->idx);
-+}
-+EXPORT_SYMBOL(qman_ceetm_sp_set_lni);
-+
-+int qman_ceetm_sp_get_lni(struct qm_ceetm_sp *sp, unsigned int *lni_idx)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_query query_opts;
-+	struct qm_mcr_ceetm_mapping_shaper_tcfc_query query_result;
-+
-+	query_opts.cid = cpu_to_be16(CEETM_COMMAND_SP_MAPPING | sp->idx);
-+	query_opts.dcpid = sp->dcp_idx;
-+	if (qman_ceetm_query_mapping_shaper_tcfc(&query_opts, &query_result)) {
-+		pr_err("Can't get SP <-> LNI mapping\n");
-+		return -EINVAL;
-+	}
-+	*lni_idx = query_result.sp_mapping_query.map_lni_id;
-+	sp->lni->idx = query_result.sp_mapping_query.map_lni_id;
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_sp_get_lni);
-+
-+int qman_ceetm_lni_enable_shaper(struct qm_ceetm_lni *lni, int coupled,
-+								int oal)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_config config_opts;
-+
-+	if (lni->shaper_enable) {
-+		pr_err("The shaper has already been enabled\n");
-+		return -EINVAL;
-+	}
-+	lni->shaper_enable = 1;
-+	lni->shaper_couple = coupled;
-+	lni->oal = oal;
-+
-+	config_opts.cid = cpu_to_be16(CEETM_COMMAND_LNI_SHAPER | lni->idx);
-+	config_opts.dcpid = lni->dcp_idx;
-+	config_opts.shaper_config.cpl = coupled;
-+	config_opts.shaper_config.oal = oal;
-+	config_opts.shaper_config.crtcr = cpu_to_be24((lni->cr_token_rate.whole
-+					<< 13) | lni->cr_token_rate.fraction);
-+	config_opts.shaper_config.ertcr = cpu_to_be24((lni->er_token_rate.whole
-+					<< 13) | lni->er_token_rate.fraction);
-+	config_opts.shaper_config.crtbl =
-+					cpu_to_be16(lni->cr_token_bucket_limit);
-+	config_opts.shaper_config.ertbl =
-+					cpu_to_be16(lni->er_token_bucket_limit);
-+	config_opts.shaper_config.mps = 60;
-+
-+	return qman_ceetm_configure_mapping_shaper_tcfc(&config_opts);
-+}
-+EXPORT_SYMBOL(qman_ceetm_lni_enable_shaper);
-+
-+int qman_ceetm_lni_disable_shaper(struct qm_ceetm_lni *lni)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_config config_opts;
-+
-+	if (!lni->shaper_enable) {
-+		pr_err("The shaper has been disabled\n");
-+		return -EINVAL;
-+	}
-+
-+	config_opts.cid = cpu_to_be16(CEETM_COMMAND_LNI_SHAPER | lni->idx);
-+	config_opts.dcpid = lni->dcp_idx;
-+	config_opts.shaper_config.cpl = lni->shaper_couple;
-+	config_opts.shaper_config.oal = lni->oal;
-+	config_opts.shaper_config.crtbl =
-+					cpu_to_be16(lni->cr_token_bucket_limit);
-+	config_opts.shaper_config.ertbl =
-+					cpu_to_be16(lni->er_token_bucket_limit);
-+	/* Set CR/ER rate with all 1's to configure an infinite rate, thus
-+	 * disable the shaping.
-+	 */
-+	config_opts.shaper_config.crtcr = 0xFFFFFF;
-+	config_opts.shaper_config.ertcr = 0xFFFFFF;
-+	config_opts.shaper_config.mps = 60;
-+	lni->shaper_enable = 0;
-+	return qman_ceetm_configure_mapping_shaper_tcfc(&config_opts);
-+}
-+EXPORT_SYMBOL(qman_ceetm_lni_disable_shaper);
-+
-+int qman_ceetm_lni_is_shaper_enabled(struct qm_ceetm_lni *lni)
-+{
-+	return lni->shaper_enable;
-+}
-+EXPORT_SYMBOL(qman_ceetm_lni_is_shaper_enabled);
-+
-+int qman_ceetm_lni_set_commit_rate(struct qm_ceetm_lni *lni,
-+				const struct qm_ceetm_rate *token_rate,
-+				u16 token_limit)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_config config_opts;
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_query query_opts;
-+	struct qm_mcr_ceetm_mapping_shaper_tcfc_query query_result;
-+	int ret;
-+
-+	lni->cr_token_rate.whole = token_rate->whole;
-+	lni->cr_token_rate.fraction = token_rate->fraction;
-+	lni->cr_token_bucket_limit = token_limit;
-+	if (!lni->shaper_enable)
-+		return 0;
-+	query_opts.cid = cpu_to_be16(CEETM_COMMAND_LNI_SHAPER | lni->idx);
-+	query_opts.dcpid = lni->dcp_idx;
-+	ret = qman_ceetm_query_mapping_shaper_tcfc(&query_opts,
-+						   &query_result);
-+	if (ret) {
-+		pr_err("Fail to get current LNI shaper setting\n");
-+		return -EINVAL;
-+	}
-+
-+	config_opts.cid = cpu_to_be16(CEETM_COMMAND_LNI_SHAPER | lni->idx);
-+	config_opts.dcpid = lni->dcp_idx;
-+	config_opts.shaper_config.crtcr = cpu_to_be24((token_rate->whole << 13)
-+						      | (token_rate->fraction));
-+	config_opts.shaper_config.crtbl = cpu_to_be16(token_limit);
-+	config_opts.shaper_config.cpl = query_result.shaper_query.cpl;
-+	config_opts.shaper_config.oal = query_result.shaper_query.oal;
-+	config_opts.shaper_config.ertcr = query_result.shaper_query.ertcr;
-+	config_opts.shaper_config.ertbl = query_result.shaper_query.ertbl;
-+	config_opts.shaper_config.mps = query_result.shaper_query.mps;
-+	return	qman_ceetm_configure_mapping_shaper_tcfc(&config_opts);
-+}
-+EXPORT_SYMBOL(qman_ceetm_lni_set_commit_rate);
-+
-+int qman_ceetm_lni_set_commit_rate_bps(struct qm_ceetm_lni *lni,
-+				       u64 bps,
-+				       u16 token_limit)
-+{
-+	struct qm_ceetm_rate token_rate;
-+	int ret;
-+
-+	ret = qman_ceetm_bps2tokenrate(bps, &token_rate, 0);
-+	if (ret) {
-+		pr_err("Can not convert bps to token rate\n");
-+		return -EINVAL;
-+	}
-+
-+	return qman_ceetm_lni_set_commit_rate(lni, &token_rate, token_limit);
-+}
-+EXPORT_SYMBOL(qman_ceetm_lni_set_commit_rate_bps);
-+
-+int qman_ceetm_lni_get_commit_rate(struct qm_ceetm_lni *lni,
-+				struct qm_ceetm_rate *token_rate,
-+				u16 *token_limit)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_query query_opts;
-+	struct qm_mcr_ceetm_mapping_shaper_tcfc_query query_result;
-+	int ret;
-+
-+	query_opts.cid = cpu_to_be16(CEETM_COMMAND_LNI_SHAPER | lni->idx);
-+	query_opts.dcpid = lni->dcp_idx;
-+
-+	ret = qman_ceetm_query_mapping_shaper_tcfc(&query_opts, &query_result);
-+	if (ret) {
-+		pr_err("The LNI CR rate or limit is not set\n");
-+		return -EINVAL;
-+	}
-+	token_rate->whole = be24_to_cpu(query_result.shaper_query.crtcr) >> 13;
-+	token_rate->fraction = be24_to_cpu(query_result.shaper_query.crtcr) &
-+				 0x1FFF;
-+	*token_limit = be16_to_cpu(query_result.shaper_query.crtbl);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_lni_get_commit_rate);
-+
-+int qman_ceetm_lni_get_commit_rate_bps(struct qm_ceetm_lni *lni,
-+				       u64 *bps, u16 *token_limit)
-+{
-+	struct qm_ceetm_rate token_rate;
-+	int ret;
-+
-+	ret = qman_ceetm_lni_get_commit_rate(lni, &token_rate, token_limit);
-+	if (ret) {
-+		pr_err("The LNI CR rate or limit is not available\n");
-+		return -EINVAL;
-+	}
-+
-+	return qman_ceetm_tokenrate2bps(&token_rate, bps, 0);
-+}
-+EXPORT_SYMBOL(qman_ceetm_lni_get_commit_rate_bps);
-+
-+int qman_ceetm_lni_set_excess_rate(struct qm_ceetm_lni *lni,
-+					const struct qm_ceetm_rate *token_rate,
-+					u16 token_limit)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_config config_opts;
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_query query_opts;
-+	struct qm_mcr_ceetm_mapping_shaper_tcfc_query query_result;
-+	int ret;
-+
-+	lni->er_token_rate.whole = token_rate->whole;
-+	lni->er_token_rate.fraction = token_rate->fraction;
-+	lni->er_token_bucket_limit = token_limit;
-+	if (!lni->shaper_enable)
-+		return 0;
-+
-+	query_opts.cid = cpu_to_be16(CEETM_COMMAND_LNI_SHAPER | lni->idx);
-+	query_opts.dcpid = lni->dcp_idx;
-+	ret = qman_ceetm_query_mapping_shaper_tcfc(&query_opts,
-+						   &query_result);
-+	if (ret) {
-+		pr_err("Fail to get current LNI shaper setting\n");
-+		return -EINVAL;
-+	}
-+
-+	config_opts.cid = cpu_to_be16(CEETM_COMMAND_LNI_SHAPER | lni->idx);
-+	config_opts.dcpid = lni->dcp_idx;
-+	config_opts.shaper_config.ertcr = cpu_to_be24(
-+		(token_rate->whole << 13) | (token_rate->fraction));
-+	config_opts.shaper_config.ertbl = cpu_to_be16(token_limit);
-+	config_opts.shaper_config.cpl = query_result.shaper_query.cpl;
-+	config_opts.shaper_config.oal = query_result.shaper_query.oal;
-+	config_opts.shaper_config.crtcr = query_result.shaper_query.crtcr;
-+	config_opts.shaper_config.crtbl = query_result.shaper_query.crtbl;
-+	config_opts.shaper_config.mps = query_result.shaper_query.mps;
-+	return qman_ceetm_configure_mapping_shaper_tcfc(&config_opts);
-+}
-+EXPORT_SYMBOL(qman_ceetm_lni_set_excess_rate);
-+
-+int qman_ceetm_lni_set_excess_rate_bps(struct qm_ceetm_lni *lni,
-+				       u64 bps,
-+				       u16 token_limit)
-+{
-+	struct qm_ceetm_rate token_rate;
-+	int ret;
-+
-+	ret = qman_ceetm_bps2tokenrate(bps, &token_rate, 0);
-+	if (ret) {
-+		pr_err("Can not convert bps to token rate\n");
-+		return -EINVAL;
-+	}
-+	return qman_ceetm_lni_set_excess_rate(lni, &token_rate, token_limit);
-+}
-+EXPORT_SYMBOL(qman_ceetm_lni_set_excess_rate_bps);
-+
-+int qman_ceetm_lni_get_excess_rate(struct qm_ceetm_lni *lni,
-+					struct qm_ceetm_rate *token_rate,
-+					u16 *token_limit)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_query query_opts;
-+	struct qm_mcr_ceetm_mapping_shaper_tcfc_query query_result;
-+	int ret;
-+
-+	query_opts.cid = cpu_to_be16(CEETM_COMMAND_LNI_SHAPER | lni->idx);
-+	query_opts.dcpid = lni->dcp_idx;
-+	ret = qman_ceetm_query_mapping_shaper_tcfc(&query_opts, &query_result);
-+	if (ret) {
-+		pr_err("The LNI ER rate or limit is not set\n");
-+		return -EINVAL;
-+	}
-+	token_rate->whole = be24_to_cpu(query_result.shaper_query.ertcr) >> 13;
-+	token_rate->fraction = be24_to_cpu(query_result.shaper_query.ertcr) &
-+								 0x1FFF;
-+	*token_limit = be16_to_cpu(query_result.shaper_query.ertbl);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_lni_get_excess_rate);
-+
-+int qman_ceetm_lni_get_excess_rate_bps(struct qm_ceetm_lni *lni,
-+				       u64 *bps, u16 *token_limit)
-+{
-+	struct qm_ceetm_rate token_rate;
-+	int ret;
-+
-+	ret = qman_ceetm_lni_get_excess_rate(lni, &token_rate, token_limit);
-+	if (ret) {
-+		pr_err("The LNI ER rate or limit is not available\n");
-+		return -EINVAL;
-+	}
-+
-+	return qman_ceetm_tokenrate2bps(&token_rate, bps, 0);
-+}
-+EXPORT_SYMBOL(qman_ceetm_lni_get_excess_rate_bps);
-+
-+#define QMAN_CEETM_LNITCFCC_CQ_LEVEL_SHIFT(n) ((15 - n) * 4)
-+#define QMAN_CEETM_LNITCFCC_ENABLE 0x8
-+int qman_ceetm_lni_set_tcfcc(struct qm_ceetm_lni *lni,
-+				unsigned int cq_level,
-+				int traffic_class)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_config config_opts;
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_query query_opts;
-+	struct qm_mcr_ceetm_mapping_shaper_tcfc_query query_result;
-+	u64 lnitcfcc;
-+
-+	if ((cq_level > 15) | (traffic_class > 7)) {
-+		pr_err("The CQ or traffic class id is out of range\n");
-+		return -EINVAL;
-+	}
-+
-+	query_opts.cid = cpu_to_be16(CEETM_COMMAND_TCFC | lni->idx);
-+	query_opts.dcpid = lni->dcp_idx;
-+	if (qman_ceetm_query_mapping_shaper_tcfc(&query_opts, &query_result)) {
-+		pr_err("Fail to query tcfcc\n");
-+		return -EINVAL;
-+	}
-+
-+	lnitcfcc = be64_to_cpu(query_result.tcfc_query.lnitcfcc);
-+	if (traffic_class == -1) {
-+		/* disable tcfc for this CQ */
-+		lnitcfcc &= ~((u64)QMAN_CEETM_LNITCFCC_ENABLE <<
-+				QMAN_CEETM_LNITCFCC_CQ_LEVEL_SHIFT(cq_level));
-+	} else {
-+		lnitcfcc &= ~((u64)0xF <<
-+				QMAN_CEETM_LNITCFCC_CQ_LEVEL_SHIFT(cq_level));
-+		lnitcfcc |= ((u64)(QMAN_CEETM_LNITCFCC_ENABLE |
-+				traffic_class)) <<
-+				QMAN_CEETM_LNITCFCC_CQ_LEVEL_SHIFT(cq_level);
-+	}
-+	config_opts.tcfc_config.lnitcfcc = cpu_to_be64(lnitcfcc);
-+	config_opts.cid = cpu_to_be16(CEETM_COMMAND_TCFC | lni->idx);
-+	config_opts.dcpid = lni->dcp_idx;
-+	return qman_ceetm_configure_mapping_shaper_tcfc(&config_opts);
-+}
-+EXPORT_SYMBOL(qman_ceetm_lni_set_tcfcc);
-+
-+#define QMAN_CEETM_LNITCFCC_TC_MASK 0x7
-+int qman_ceetm_lni_get_tcfcc(struct qm_ceetm_lni *lni, unsigned int cq_level,
-+						int *traffic_class)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_query query_opts;
-+	struct qm_mcr_ceetm_mapping_shaper_tcfc_query query_result;
-+	int ret;
-+	u8 lnitcfcc;
-+
-+	if (cq_level > 15) {
-+		pr_err("the CQ level is out of range\n");
-+		return -EINVAL;
-+	}
-+
-+	query_opts.cid = cpu_to_be16(CEETM_COMMAND_TCFC | lni->idx);
-+	query_opts.dcpid = lni->dcp_idx;
-+	ret = qman_ceetm_query_mapping_shaper_tcfc(&query_opts, &query_result);
-+	if (ret)
-+		return ret;
-+	lnitcfcc = (u8)be64_to_cpu((query_result.tcfc_query.lnitcfcc) >>
-+				QMAN_CEETM_LNITCFCC_CQ_LEVEL_SHIFT(cq_level));
-+	if (lnitcfcc & QMAN_CEETM_LNITCFCC_ENABLE)
-+		*traffic_class = lnitcfcc & QMAN_CEETM_LNITCFCC_TC_MASK;
-+	else
-+		*traffic_class = -1;
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_lni_get_tcfcc);
-+
-+int qman_ceetm_channel_claim(struct qm_ceetm_channel **channel,
-+				struct qm_ceetm_lni *lni)
-+{
-+	struct qm_ceetm_channel *p;
-+	u32 channel_idx;
-+	int ret = 0;
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_config config_opts;
-+
-+	if (lni->dcp_idx == qm_dc_portal_fman0) {
-+		ret = qman_alloc_ceetm0_channel(&channel_idx);
-+	} else if (lni->dcp_idx == qm_dc_portal_fman1) {
-+		ret = qman_alloc_ceetm1_channel(&channel_idx);
-+	} else {
-+		pr_err("dcp_idx %u does not correspond to a known fman in this driver\n",
-+			lni->dcp_idx);
-+		return -EINVAL;
-+	}
-+
-+	if (ret) {
-+		pr_err("The is no channel available for LNI#%d\n", lni->idx);
-+		return -ENODEV;
-+	}
-+
-+	p = kzalloc(sizeof(*p), GFP_KERNEL);
-+	if (!p)
-+		return -ENOMEM;
-+	p->idx = channel_idx;
-+	p->dcp_idx = lni->dcp_idx;
-+	p->lni_idx = lni->idx;
-+	list_add_tail(&p->node, &lni->channels);
-+	INIT_LIST_HEAD(&p->class_queues);
-+	INIT_LIST_HEAD(&p->ccgs);
-+	config_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_MAPPING |
-+						channel_idx);
-+	config_opts.dcpid = lni->dcp_idx;
-+	config_opts.channel_mapping.map_lni_id = lni->idx;
-+	config_opts.channel_mapping.map_shaped = 0;
-+	if (qman_ceetm_configure_mapping_shaper_tcfc(&config_opts)) {
-+		pr_err("Can't map channel#%d for LNI#%d\n",
-+						channel_idx, lni->idx);
-+		return -EINVAL;
-+	}
-+	*channel = p;
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_claim);
-+
-+int qman_ceetm_channel_release(struct qm_ceetm_channel *channel)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_config config_opts;
-+	if (!list_empty(&channel->class_queues)) {
-+		pr_err("CEETM channel#%d has class queue unreleased!\n",
-+						channel->idx);
-+		return -EBUSY;
-+	}
-+	if (!list_empty(&channel->ccgs)) {
-+		pr_err("CEETM channel#%d has ccg unreleased!\n",
-+						channel->idx);
-+		return -EBUSY;
-+	}
-+
-+	/* channel->dcp_idx corresponds to known fman validation */
-+	if ((channel->dcp_idx != qm_dc_portal_fman0) &&
-+	    (channel->dcp_idx != qm_dc_portal_fman1)) {
-+		pr_err("dcp_idx %u does not correspond to a known fman in this driver\n",
-+			channel->dcp_idx);
-+		return -EINVAL;
-+	}
-+
-+	config_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_SHAPER |
-+				      channel->idx);
-+	config_opts.dcpid = channel->dcp_idx;
-+	memset(&config_opts.shaper_config, 0,
-+				sizeof(config_opts.shaper_config));
-+	if (qman_ceetm_configure_mapping_shaper_tcfc(&config_opts)) {
-+		pr_err("Can't reset channel shapping parameters\n");
-+		return -EINVAL;
-+	}
-+
-+	if (channel->dcp_idx == qm_dc_portal_fman0) {
-+		qman_release_ceetm0_channelid(channel->idx);
-+	} else if (channel->dcp_idx == qm_dc_portal_fman1) {
-+		qman_release_ceetm1_channelid(channel->idx);
-+	} else {
-+		pr_err("dcp_idx %u does not correspond to a known fman in this driver\n",
-+			channel->dcp_idx);
-+		return -EINVAL;
-+	}
-+	list_del(&channel->node);
-+	kfree(channel);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_release);
-+
-+int qman_ceetm_channel_enable_shaper(struct qm_ceetm_channel *channel,
-+								int coupled)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_query query_opts;
-+	struct qm_mcr_ceetm_mapping_shaper_tcfc_query query_result;
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_config config_opts;
-+
-+	if (channel->shaper_enable == 1) {
-+		pr_err("This channel shaper has been enabled!\n");
-+		return -EINVAL;
-+	}
-+
-+	channel->shaper_enable = 1;
-+	channel->shaper_couple = coupled;
-+
-+	query_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_MAPPING |
-+						channel->idx);
-+	query_opts.dcpid = channel->dcp_idx;
-+
-+	if (qman_ceetm_query_mapping_shaper_tcfc(&query_opts, &query_result)) {
-+		pr_err("Can't query channel mapping\n");
-+		return -EINVAL;
-+	}
-+
-+	config_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_MAPPING |
-+						channel->idx);
-+	config_opts.dcpid = channel->dcp_idx;
-+	config_opts.channel_mapping.map_lni_id =
-+				query_result.channel_mapping_query.map_lni_id;
-+	config_opts.channel_mapping.map_shaped = 1;
-+	if (qman_ceetm_configure_mapping_shaper_tcfc(&config_opts)) {
-+		pr_err("Can't enable shaper for channel #%d\n",	channel->idx);
-+		return -EINVAL;
-+	}
-+
-+	config_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_SHAPER |
-+						channel->idx);
-+	config_opts.shaper_config.cpl = coupled;
-+	config_opts.shaper_config.crtcr =
-+				cpu_to_be24((channel->cr_token_rate.whole
-+				<< 13) |
-+				channel->cr_token_rate.fraction);
-+	config_opts.shaper_config.ertcr =
-+				cpu_to_be24(channel->er_token_rate.whole
-+				<< 13 |
-+				channel->er_token_rate.fraction);
-+	config_opts.shaper_config.crtbl =
-+				cpu_to_be16(channel->cr_token_bucket_limit);
-+	config_opts.shaper_config.ertbl =
-+				cpu_to_be16(channel->er_token_bucket_limit);
-+
-+	return qman_ceetm_configure_mapping_shaper_tcfc(&config_opts);
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_enable_shaper);
-+
-+int qman_ceetm_channel_disable_shaper(struct qm_ceetm_channel *channel)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_query query_opts;
-+	struct qm_mcr_ceetm_mapping_shaper_tcfc_query query_result;
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_config config_opts;
-+
-+
-+	query_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_MAPPING |
-+						channel->idx);
-+	query_opts.dcpid = channel->dcp_idx;
-+
-+	if (qman_ceetm_query_mapping_shaper_tcfc(&query_opts, &query_result)) {
-+		pr_err("Can't query channel mapping\n");
-+		return -EINVAL;
-+	}
-+
-+	config_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_MAPPING |
-+						channel->idx);
-+	config_opts.dcpid = channel->dcp_idx;
-+	config_opts.channel_mapping.map_shaped = 0;
-+	config_opts.channel_mapping.map_lni_id =
-+				query_result.channel_mapping_query.map_lni_id;
-+
-+	return qman_ceetm_configure_mapping_shaper_tcfc(&config_opts);
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_disable_shaper);
-+
-+int qman_ceetm_channel_is_shaper_enabled(struct qm_ceetm_channel *channel)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_query query_opts;
-+	struct qm_mcr_ceetm_mapping_shaper_tcfc_query query_result;
-+
-+	query_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_MAPPING |
-+						channel->idx);
-+	query_opts.dcpid = channel->dcp_idx;
-+
-+	if (qman_ceetm_query_mapping_shaper_tcfc(&query_opts, &query_result)) {
-+		pr_err("Can't query channel mapping\n");
-+		return -EINVAL;
-+	}
-+
-+	return query_result.channel_mapping_query.map_shaped;
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_is_shaper_enabled);
-+
-+int qman_ceetm_channel_set_commit_rate(struct qm_ceetm_channel *channel,
-+				const struct qm_ceetm_rate *token_rate,
-+				u16 token_limit)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_config config_opts;
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_query query_opts;
-+	struct qm_mcr_ceetm_mapping_shaper_tcfc_query query_result;
-+	int ret;
-+
-+	query_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_SHAPER |
-+						channel->idx);
-+	query_opts.dcpid = channel->dcp_idx;
-+
-+	ret = qman_ceetm_query_mapping_shaper_tcfc(&query_opts, &query_result);
-+	if (ret) {
-+		pr_err("Fail to get the current channel shaper setting\n");
-+		return -EINVAL;
-+	}
-+
-+	channel->cr_token_rate.whole = token_rate->whole;
-+	channel->cr_token_rate.fraction = token_rate->fraction;
-+	channel->cr_token_bucket_limit = token_limit;
-+	config_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_SHAPER |
-+							channel->idx);
-+	config_opts.dcpid = channel->dcp_idx;
-+	config_opts.shaper_config.crtcr = cpu_to_be24((token_rate->whole
-+					<< 13) | (token_rate->fraction));
-+	config_opts.shaper_config.crtbl = cpu_to_be16(token_limit);
-+	config_opts.shaper_config.cpl = query_result.shaper_query.cpl;
-+	config_opts.shaper_config.ertcr = query_result.shaper_query.ertcr;
-+	config_opts.shaper_config.ertbl = query_result.shaper_query.ertbl;
-+	return qman_ceetm_configure_mapping_shaper_tcfc(&config_opts);
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_set_commit_rate);
-+
-+int qman_ceetm_channel_set_commit_rate_bps(struct qm_ceetm_channel *channel,
-+					   u64 bps, u16 token_limit)
-+{
-+	struct qm_ceetm_rate token_rate;
-+	int ret;
-+
-+	ret = qman_ceetm_bps2tokenrate(bps, &token_rate, 0);
-+	if (ret) {
-+		pr_err("Can not convert bps to token rate\n");
-+		return -EINVAL;
-+	}
-+	return qman_ceetm_channel_set_commit_rate(channel, &token_rate,
-+						  token_limit);
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_set_commit_rate_bps);
-+
-+int qman_ceetm_channel_get_commit_rate(struct qm_ceetm_channel *channel,
-+				struct qm_ceetm_rate *token_rate,
-+				u16 *token_limit)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_query query_opts;
-+	struct qm_mcr_ceetm_mapping_shaper_tcfc_query query_result;
-+	int ret;
-+
-+	query_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_SHAPER |
-+						channel->idx);
-+	query_opts.dcpid = channel->dcp_idx;
-+
-+	ret = qman_ceetm_query_mapping_shaper_tcfc(&query_opts, &query_result);
-+	if (ret | !query_result.shaper_query.crtcr |
-+			 !query_result.shaper_query.crtbl) {
-+		pr_err("The channel commit rate or limit is not set\n");
-+		return -EINVAL;
-+	}
-+	token_rate->whole = be24_to_cpu(query_result.shaper_query.crtcr) >> 13;
-+	token_rate->fraction = be24_to_cpu(query_result.shaper_query.crtcr) &
-+							0x1FFF;
-+	*token_limit = be16_to_cpu(query_result.shaper_query.crtbl);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_get_commit_rate);
-+
-+int qman_ceetm_channel_get_commit_rate_bps(struct qm_ceetm_channel *channel,
-+					   u64 *bps, u16 *token_limit)
-+{
-+	struct qm_ceetm_rate token_rate;
-+	int ret;
-+
-+	ret = qman_ceetm_channel_get_commit_rate(channel, &token_rate,
-+						 token_limit);
-+	if (ret) {
-+		pr_err("The channel CR rate or limit is not available\n");
-+		return -EINVAL;
-+	}
-+
-+	return qman_ceetm_tokenrate2bps(&token_rate, bps, 0);
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_get_commit_rate_bps);
-+
-+int qman_ceetm_channel_set_excess_rate(struct qm_ceetm_channel *channel,
-+					const struct qm_ceetm_rate *token_rate,
-+					u16 token_limit)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_config config_opts;
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_query query_opts;
-+	struct qm_mcr_ceetm_mapping_shaper_tcfc_query query_result;
-+	int ret;
-+
-+	query_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_SHAPER |
-+							channel->idx);
-+	query_opts.dcpid = channel->dcp_idx;
-+	ret = qman_ceetm_query_mapping_shaper_tcfc(&query_opts, &query_result);
-+	if (ret) {
-+		pr_err("Fail to get the current channel shaper setting\n");
-+		return -EINVAL;
-+	}
-+
-+	channel->er_token_rate.whole = token_rate->whole;
-+	channel->er_token_rate.fraction = token_rate->fraction;
-+	channel->er_token_bucket_limit = token_limit;
-+	config_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_SHAPER |
-+							channel->idx);
-+	config_opts.dcpid = channel->dcp_idx;
-+	config_opts.shaper_config.ertcr = cpu_to_be24(
-+			 (token_rate->whole << 13) | (token_rate->fraction));
-+	config_opts.shaper_config.ertbl = cpu_to_be16(token_limit);
-+	config_opts.shaper_config.cpl = query_result.shaper_query.cpl;
-+	config_opts.shaper_config.crtcr = query_result.shaper_query.crtcr;
-+	config_opts.shaper_config.crtbl = query_result.shaper_query.crtbl;
-+	return qman_ceetm_configure_mapping_shaper_tcfc(&config_opts);
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_set_excess_rate);
-+
-+int qman_ceetm_channel_set_excess_rate_bps(struct qm_ceetm_channel *channel,
-+					   u64 bps, u16 token_limit)
-+{
-+	struct qm_ceetm_rate token_rate;
-+	int ret;
-+
-+	ret = qman_ceetm_bps2tokenrate(bps, &token_rate, 0);
-+	if (ret) {
-+		pr_err("Can not convert bps to token rate\n");
-+		return -EINVAL;
-+	}
-+	return qman_ceetm_channel_set_excess_rate(channel, &token_rate,
-+						  token_limit);
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_set_excess_rate_bps);
-+
-+int qman_ceetm_channel_get_excess_rate(struct qm_ceetm_channel *channel,
-+					struct qm_ceetm_rate *token_rate,
-+					u16 *token_limit)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_query query_opts;
-+	struct qm_mcr_ceetm_mapping_shaper_tcfc_query query_result;
-+	int ret;
-+
-+	query_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_SHAPER |
-+							channel->idx);
-+	query_opts.dcpid = channel->dcp_idx;
-+	ret = qman_ceetm_query_mapping_shaper_tcfc(&query_opts, &query_result);
-+	if (ret | !query_result.shaper_query.ertcr |
-+			 !query_result.shaper_query.ertbl) {
-+		pr_err("The channel excess rate or limit is not set\n");
-+		return -EINVAL;
-+	}
-+	token_rate->whole = be24_to_cpu(query_result.shaper_query.ertcr) >> 13;
-+	token_rate->fraction = be24_to_cpu(query_result.shaper_query.ertcr) &
-+								0x1FFF;
-+	*token_limit = be16_to_cpu(query_result.shaper_query.ertbl);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_get_excess_rate);
-+
-+int qman_ceetm_channel_get_excess_rate_bps(struct qm_ceetm_channel *channel,
-+					   u64 *bps, u16 *token_limit)
-+{
-+	struct qm_ceetm_rate token_rate;
-+	int ret;
-+
-+	ret = qman_ceetm_channel_get_excess_rate(channel, &token_rate,
-+						 token_limit);
-+	if (ret) {
-+		pr_err("The channel ER rate or limit is not available\n");
-+		return -EINVAL;
-+	}
-+
-+	return qman_ceetm_tokenrate2bps(&token_rate, bps, 0);
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_get_excess_rate_bps);
-+
-+int qman_ceetm_channel_set_weight(struct qm_ceetm_channel *channel,
-+						u16 token_limit)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_config config_opts;
-+
-+	if (channel->shaper_enable) {
-+		pr_err("This channel is a shaped one\n");
-+		return -EINVAL;
-+	}
-+
-+	channel->cr_token_bucket_limit = token_limit;
-+	config_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_SHAPER |
-+						channel->idx);
-+	config_opts.dcpid = channel->dcp_idx;
-+	config_opts.shaper_config.crtbl = cpu_to_be16(token_limit);
-+	return	qman_ceetm_configure_mapping_shaper_tcfc(&config_opts);
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_set_weight);
-+
-+int qman_ceetm_channel_get_weight(struct qm_ceetm_channel *channel,
-+					u16 *token_limit)
-+{
-+	struct qm_mcc_ceetm_mapping_shaper_tcfc_query query_opts;
-+	struct qm_mcr_ceetm_mapping_shaper_tcfc_query query_result;
-+	int ret;
-+
-+	query_opts.cid = cpu_to_be16(CEETM_COMMAND_CHANNEL_SHAPER |
-+						channel->idx);
-+	query_opts.dcpid = channel->dcp_idx;
-+	ret = qman_ceetm_query_mapping_shaper_tcfc(&query_opts, &query_result);
-+	if (ret | !query_result.shaper_query.crtbl) {
-+		pr_err("This unshaped channel's uFQ wight is unavailable\n");
-+		return -EINVAL;
-+	}
-+	*token_limit = be16_to_cpu(query_result.shaper_query.crtbl);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_get_weight);
-+
-+int qman_ceetm_channel_set_group(struct qm_ceetm_channel *channel, int group_b,
-+				unsigned int prio_a, unsigned int prio_b)
-+{
-+	struct qm_mcc_ceetm_class_scheduler_config config_opts;
-+	struct qm_mcr_ceetm_class_scheduler_query query_result;
-+	int i;
-+
-+	if (prio_a > 7) {
-+		pr_err("The priority of group A is out of range\n");
-+		return -EINVAL;
-+	}
-+	if (group_b && (prio_b > 7)) {
-+		pr_err("The priority of group B is out of range\n");
-+		return -EINVAL;
-+	}
-+
-+	if (qman_ceetm_query_class_scheduler(channel, &query_result)) {
-+		pr_err("Can't query channel#%d's scheduler!\n", channel->idx);
-+		return -EINVAL;
-+	}
-+
-+	config_opts.cqcid = cpu_to_be16(channel->idx);
-+	config_opts.dcpid = channel->dcp_idx;
-+	config_opts.gpc_combine_flag = !group_b;
-+	config_opts.gpc_prio_a = prio_a;
-+	config_opts.gpc_prio_b = prio_b;
-+
-+	for (i = 0; i < 8; i++)
-+		config_opts.w[i] = query_result.w[i];
-+	config_opts.crem = query_result.crem;
-+	config_opts.erem = query_result.erem;
-+
-+	return qman_ceetm_configure_class_scheduler(&config_opts);
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_set_group);
-+
-+int qman_ceetm_channel_get_group(struct qm_ceetm_channel *channel, int *group_b,
-+				unsigned int *prio_a, unsigned int *prio_b)
-+{
-+	struct qm_mcr_ceetm_class_scheduler_query query_result;
-+
-+	if (qman_ceetm_query_class_scheduler(channel, &query_result)) {
-+		pr_err("Can't query channel#%d's scheduler!\n", channel->idx);
-+		return -EINVAL;
-+	}
-+	*group_b = !query_result.gpc_combine_flag;
-+	*prio_a = query_result.gpc_prio_a;
-+	*prio_b = query_result.gpc_prio_b;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_get_group);
-+
-+#define GROUP_A_ELIGIBILITY_SET		(1 << 8)
-+#define GROUP_B_ELIGIBILITY_SET		(1 << 9)
-+#define CQ_ELIGIBILITY_SET(n)		(1 << (7 - n))
-+int qman_ceetm_channel_set_group_cr_eligibility(struct qm_ceetm_channel
-+				*channel, int group_b, int cre)
-+{
-+	struct qm_mcc_ceetm_class_scheduler_config csch_config;
-+	struct qm_mcr_ceetm_class_scheduler_query csch_query;
-+	int i;
-+
-+	if (qman_ceetm_query_class_scheduler(channel, &csch_query)) {
-+		pr_err("Cannot get the channel %d scheduler setting.\n",
-+						channel->idx);
-+		return -EINVAL;
-+	}
-+	csch_config.cqcid = cpu_to_be16(channel->idx);
-+	csch_config.dcpid = channel->dcp_idx;
-+	csch_config.gpc_combine_flag = csch_query.gpc_combine_flag;
-+	csch_config.gpc_prio_a = csch_query.gpc_prio_a;
-+	csch_config.gpc_prio_b = csch_query.gpc_prio_b;
-+
-+	for (i = 0; i < 8; i++)
-+		csch_config.w[i] = csch_query.w[i];
-+	csch_config.erem = csch_query.erem;
-+	if (group_b)
-+		csch_config.crem = (be16_to_cpu(csch_query.crem)
-+					& ~GROUP_B_ELIGIBILITY_SET)
-+					| (cre ? GROUP_B_ELIGIBILITY_SET : 0);
-+	else
-+		csch_config.crem = (be16_to_cpu(csch_query.crem)
-+					& ~GROUP_A_ELIGIBILITY_SET)
-+					| (cre ? GROUP_A_ELIGIBILITY_SET : 0);
-+
-+	csch_config.crem = cpu_to_be16(csch_config.crem);
-+
-+	if (qman_ceetm_configure_class_scheduler(&csch_config)) {
-+		pr_err("Cannot config channel %d's scheduler with "
-+			"group_%c's cr eligibility\n", channel->idx,
-+			group_b ? 'b' : 'a');
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_set_group_cr_eligibility);
-+
-+int qman_ceetm_channel_set_group_er_eligibility(struct qm_ceetm_channel
-+				*channel, int group_b, int ere)
-+{
-+	struct qm_mcc_ceetm_class_scheduler_config csch_config;
-+	struct qm_mcr_ceetm_class_scheduler_query csch_query;
-+	int i;
-+
-+	if (qman_ceetm_query_class_scheduler(channel, &csch_query)) {
-+		pr_err("Cannot get the channel %d scheduler setting.\n",
-+						channel->idx);
-+		return -EINVAL;
-+	}
-+	csch_config.cqcid = cpu_to_be16(channel->idx);
-+	csch_config.dcpid = channel->dcp_idx;
-+	csch_config.gpc_combine_flag = csch_query.gpc_combine_flag;
-+	csch_config.gpc_prio_a = csch_query.gpc_prio_a;
-+	csch_config.gpc_prio_b = csch_query.gpc_prio_b;
-+
-+	for (i = 0; i < 8; i++)
-+		csch_config.w[i] = csch_query.w[i];
-+	csch_config.crem = csch_query.crem;
-+	if (group_b)
-+		csch_config.erem = (be16_to_cpu(csch_query.erem)
-+					& ~GROUP_B_ELIGIBILITY_SET)
-+					| (ere ? GROUP_B_ELIGIBILITY_SET : 0);
-+	else
-+		csch_config.erem = (be16_to_cpu(csch_query.erem)
-+					& ~GROUP_A_ELIGIBILITY_SET)
-+					| (ere ? GROUP_A_ELIGIBILITY_SET : 0);
-+
-+	csch_config.erem = cpu_to_be16(csch_config.erem);
-+
-+	if (qman_ceetm_configure_class_scheduler(&csch_config)) {
-+		pr_err("Cannot config channel %d's scheduler with "
-+			"group_%c's er eligibility\n", channel->idx,
-+			group_b ? 'b' : 'a');
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_set_group_er_eligibility);
-+
-+int qman_ceetm_channel_set_cq_cr_eligibility(struct qm_ceetm_channel *channel,
-+						unsigned int idx, int cre)
-+{
-+	struct qm_mcc_ceetm_class_scheduler_config csch_config;
-+	struct qm_mcr_ceetm_class_scheduler_query csch_query;
-+	int i;
-+
-+	if (idx > 7) {
-+		pr_err("CQ index is out of range\n");
-+		return -EINVAL;
-+	}
-+	if (qman_ceetm_query_class_scheduler(channel, &csch_query)) {
-+		pr_err("Cannot get the channel %d scheduler setting.\n",
-+						channel->idx);
-+		return -EINVAL;
-+	}
-+	csch_config.cqcid = cpu_to_be16(channel->idx);
-+	csch_config.dcpid = channel->dcp_idx;
-+	csch_config.gpc_combine_flag = csch_query.gpc_combine_flag;
-+	csch_config.gpc_prio_a = csch_query.gpc_prio_a;
-+	csch_config.gpc_prio_b = csch_query.gpc_prio_b;
-+	for (i = 0; i < 8; i++)
-+		csch_config.w[i] = csch_query.w[i];
-+	csch_config.erem = csch_query.erem;
-+	csch_config.crem = (be16_to_cpu(csch_query.crem)
-+					& ~CQ_ELIGIBILITY_SET(idx)) |
-+					(cre ? CQ_ELIGIBILITY_SET(idx) : 0);
-+	csch_config.crem = cpu_to_be16(csch_config.crem);
-+	if (qman_ceetm_configure_class_scheduler(&csch_config)) {
-+		pr_err("Cannot config channel scheduler to set "
-+			"cr eligibility mask for CQ#%d\n", idx);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_set_cq_cr_eligibility);
-+
-+int qman_ceetm_channel_set_cq_er_eligibility(struct qm_ceetm_channel *channel,
-+						unsigned int idx, int ere)
-+{
-+	struct qm_mcc_ceetm_class_scheduler_config csch_config;
-+	struct qm_mcr_ceetm_class_scheduler_query csch_query;
-+	int i;
-+
-+	if (idx > 7) {
-+		pr_err("CQ index is out of range\n");
-+		return -EINVAL;
-+	}
-+	if (qman_ceetm_query_class_scheduler(channel, &csch_query)) {
-+		pr_err("Cannot get the channel %d scheduler setting.\n",
-+						channel->idx);
-+		return -EINVAL;
-+	}
-+	csch_config.cqcid = cpu_to_be16(channel->idx);
-+	csch_config.dcpid = channel->dcp_idx;
-+	csch_config.gpc_combine_flag = csch_query.gpc_combine_flag;
-+	csch_config.gpc_prio_a = csch_query.gpc_prio_a;
-+	csch_config.gpc_prio_b = csch_query.gpc_prio_b;
-+	for (i = 0; i < 8; i++)
-+		csch_config.w[i] = csch_query.w[i];
-+	csch_config.crem = csch_query.crem;
-+	csch_config.erem = (be16_to_cpu(csch_query.erem)
-+					& ~CQ_ELIGIBILITY_SET(idx)) |
-+					(ere ? CQ_ELIGIBILITY_SET(idx) : 0);
-+	csch_config.erem = cpu_to_be16(csch_config.erem);
-+	if (qman_ceetm_configure_class_scheduler(&csch_config)) {
-+		pr_err("Cannot config channel scheduler to set "
-+			"er eligibility mask for CQ#%d\n", idx);
-+		return -EINVAL;
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_channel_set_cq_er_eligibility);
-+
-+int qman_ceetm_cq_claim(struct qm_ceetm_cq **cq,
-+		struct qm_ceetm_channel *channel, unsigned int idx,
-+		struct qm_ceetm_ccg *ccg)
-+{
-+	struct qm_ceetm_cq *p;
-+	struct qm_mcc_ceetm_cq_config cq_config;
-+
-+	if (idx > 7) {
-+		pr_err("The independent class queue id is out of range\n");
-+		return -EINVAL;
-+	}
-+
-+	list_for_each_entry(p, &channel->class_queues, node) {
-+		if (p->idx == idx) {
-+			pr_err("The CQ#%d has been claimed!\n", idx);
-+			return -EINVAL;
-+		}
-+	}
-+
-+	p = kmalloc(sizeof(*p), GFP_KERNEL);
-+	if (!p) {
-+		pr_err("Can't allocate memory for CQ#%d!\n", idx);
-+		return -ENOMEM;
-+	}
-+
-+	list_add_tail(&p->node, &channel->class_queues);
-+	p->idx = idx;
-+	p->is_claimed = 1;
-+	p->parent = channel;
-+	INIT_LIST_HEAD(&p->bound_lfqids);
-+
-+	if (ccg) {
-+		cq_config.cqid = cpu_to_be16((channel->idx << 4) | idx);
-+		cq_config.dcpid = channel->dcp_idx;
-+		cq_config.ccgid = cpu_to_be16(ccg->idx);
-+		if (qman_ceetm_configure_cq(&cq_config)) {
-+			pr_err("Can't configure the CQ#%d with CCGRID#%d\n",
-+						 idx, ccg->idx);
-+			list_del(&p->node);
-+			kfree(p);
-+			return -EINVAL;
-+		}
-+	}
-+
-+	*cq = p;
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_cq_claim);
-+
-+int qman_ceetm_cq_claim_A(struct qm_ceetm_cq **cq,
-+		struct qm_ceetm_channel *channel, unsigned int idx,
-+		struct qm_ceetm_ccg *ccg)
-+{
-+	struct qm_ceetm_cq *p;
-+	struct qm_mcc_ceetm_cq_config cq_config;
-+
-+	if ((idx < 8) || (idx > 15)) {
-+		pr_err("This grouped class queue id is out of range\n");
-+		return -EINVAL;
-+	}
-+
-+	list_for_each_entry(p, &channel->class_queues, node) {
-+		if (p->idx == idx) {
-+			pr_err("The CQ#%d has been claimed!\n", idx);
-+			return -EINVAL;
-+		}
-+	}
-+
-+	p = kmalloc(sizeof(*p), GFP_KERNEL);
-+	if (!p) {
-+		pr_err("Can't allocate memory for CQ#%d!\n", idx);
-+		return -ENOMEM;
-+	}
-+
-+	list_add_tail(&p->node, &channel->class_queues);
-+	p->idx = idx;
-+	p->is_claimed = 1;
-+	p->parent = channel;
-+	INIT_LIST_HEAD(&p->bound_lfqids);
-+
-+	if (ccg) {
-+		cq_config.cqid = cpu_to_be16((channel->idx << 4) | idx);
-+		cq_config.dcpid = channel->dcp_idx;
-+		cq_config.ccgid = cpu_to_be16(ccg->idx);
-+		if (qman_ceetm_configure_cq(&cq_config)) {
-+			pr_err("Can't configure the CQ#%d with CCGRID#%d\n",
-+						 idx, ccg->idx);
-+			list_del(&p->node);
-+			kfree(p);
-+			return -EINVAL;
-+		}
-+	}
-+	*cq = p;
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_cq_claim_A);
-+
-+int qman_ceetm_cq_claim_B(struct qm_ceetm_cq **cq,
-+		struct qm_ceetm_channel *channel, unsigned int idx,
-+		struct qm_ceetm_ccg *ccg)
-+{
-+	struct qm_ceetm_cq *p;
-+	struct qm_mcc_ceetm_cq_config cq_config;
-+
-+	if ((idx < 12) || (idx > 15)) {
-+		pr_err("This grouped class queue id is out of range\n");
-+		return -EINVAL;
-+	}
-+
-+	list_for_each_entry(p, &channel->class_queues, node) {
-+		if (p->idx == idx) {
-+			pr_err("The CQ#%d has been claimed!\n", idx);
-+			return -EINVAL;
-+		}
-+	}
-+
-+	p = kmalloc(sizeof(*p), GFP_KERNEL);
-+	if (!p) {
-+		pr_err("Can't allocate memory for CQ#%d!\n", idx);
-+		return -ENOMEM;
-+	}
-+
-+	list_add_tail(&p->node, &channel->class_queues);
-+	p->idx = idx;
-+	p->is_claimed = 1;
-+	p->parent = channel;
-+	INIT_LIST_HEAD(&p->bound_lfqids);
-+
-+	if (ccg) {
-+		cq_config.cqid = cpu_to_be16((channel->idx << 4) | idx);
-+		cq_config.dcpid = channel->dcp_idx;
-+		cq_config.ccgid = cpu_to_be16(ccg->idx);
-+		if (qman_ceetm_configure_cq(&cq_config)) {
-+			pr_err("Can't configure the CQ#%d with CCGRID#%d\n",
-+					 idx, ccg->idx);
-+			list_del(&p->node);
-+			kfree(p);
-+			return -EINVAL;
-+		}
-+	}
-+	*cq = p;
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_cq_claim_B);
-+
-+int qman_ceetm_cq_release(struct qm_ceetm_cq *cq)
-+{
-+	if (!list_empty(&cq->bound_lfqids)) {
-+		pr_err("The CQ#%d has unreleased LFQID\n", cq->idx);
-+		return -EBUSY;
-+	}
-+	list_del(&cq->node);
-+	qman_ceetm_drain_cq(cq);
-+	kfree(cq);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_cq_release);
-+
-+int qman_ceetm_set_queue_weight(struct qm_ceetm_cq *cq,
-+				struct qm_ceetm_weight_code *weight_code)
-+{
-+	struct qm_mcc_ceetm_class_scheduler_config config_opts;
-+	struct qm_mcr_ceetm_class_scheduler_query query_result;
-+	int i;
-+
-+	if (cq->idx < 8) {
-+		pr_err("Can not set weight for ungrouped class queue\n");
-+		return -EINVAL;
-+	}
-+
-+	if (qman_ceetm_query_class_scheduler(cq->parent, &query_result)) {
-+		pr_err("Can't query channel#%d's scheduler!\n",
-+						cq->parent->idx);
-+		return -EINVAL;
-+	}
-+
-+	config_opts.cqcid = cpu_to_be16(cq->parent->idx);
-+	config_opts.dcpid = cq->parent->dcp_idx;
-+	config_opts.crem = query_result.crem;
-+	config_opts.erem = query_result.erem;
-+	config_opts.gpc_combine_flag = query_result.gpc_combine_flag;
-+	config_opts.gpc_prio_a = query_result.gpc_prio_a;
-+	config_opts.gpc_prio_b = query_result.gpc_prio_b;
-+
-+	for (i = 0; i < 8; i++)
-+		config_opts.w[i] = query_result.w[i];
-+	config_opts.w[cq->idx - 8] = ((weight_code->y << 3) |
-+						(weight_code->x & 0x7));
-+	return qman_ceetm_configure_class_scheduler(&config_opts);
-+}
-+EXPORT_SYMBOL(qman_ceetm_set_queue_weight);
-+
-+int qman_ceetm_get_queue_weight(struct qm_ceetm_cq *cq,
-+				struct qm_ceetm_weight_code *weight_code)
-+{
-+	struct qm_mcr_ceetm_class_scheduler_query query_result;
-+
-+	if (cq->idx < 8) {
-+		pr_err("Can not get weight for ungrouped class queue\n");
-+		return -EINVAL;
-+	}
-+
-+	if (qman_ceetm_query_class_scheduler(cq->parent,
-+						&query_result)) {
-+		pr_err("Can't get the weight code for CQ#%d!\n", cq->idx);
-+		return -EINVAL;
-+	}
-+	weight_code->y = query_result.w[cq->idx - 8] >> 3;
-+	weight_code->x = query_result.w[cq->idx - 8] & 0x7;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_get_queue_weight);
-+
-+/* The WBFS code is represent as {x,y}, the effect wieght can be calculated as:
-+ *	effective weight = 2^x / (1 - (y/64))
-+ *			 = 2^(x+6) / (64 - y)
-+ */
-+static void reduce_fraction(u32 *n, u32 *d)
-+{
-+	u32 factor = 2;
-+	u32 lesser = (*n < *d) ? *n : *d;
-+	/* If factor exceeds the square-root of the lesser of *n and *d,
-+	 * then there's no point continuing. Proof: if there was a factor
-+	 * bigger than the square root, that would imply there exists
-+	 * another factor smaller than the square-root with which it
-+	 * multiplies to give 'lesser' - but that's a contradiction
-+	 * because the other factor would have already been found and
-+	 * divided out.
-+	 */
-+	while ((factor * factor) <= lesser) {
-+		/* If 'factor' is a factor of *n and *d, divide them both
-+		 * by 'factor' as many times as possible.
-+		 */
-+		while (!(*n % factor) && !(*d % factor)) {
-+			*n /= factor;
-+			*d /= factor;
-+			lesser /= factor;
-+		}
-+		if (factor == 2)
-+			factor = 3;
-+		else
-+			factor += 2;
-+	}
-+}
-+
-+int qman_ceetm_wbfs2ratio(struct qm_ceetm_weight_code *weight_code,
-+				u32 *numerator,
-+				u32 *denominator)
-+{
-+	*numerator = (u32) 1 << (weight_code->x + 6);
-+	*denominator = 64 - weight_code->y;
-+	reduce_fraction(numerator, denominator);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_wbfs2ratio);
-+
-+/* For a given x, the weight is between 2^x (inclusive) and 2^(x+1) (exclusive).
-+ * So find 'x' by range, and then estimate 'y' using:
-+ *		64 - y	= 2^(x + 6) / weight
-+ *			= 2^(x + 6) / (n/d)
-+ *			= d * 2^(x+6) / n
-+ *		y = 64 - (d * 2^(x+6) / n)
-+ */
-+int qman_ceetm_ratio2wbfs(u32 numerator,
-+				u32 denominator,
-+				struct qm_ceetm_weight_code *weight_code,
-+				int rounding)
-+{
-+	unsigned int y, x = 0;
-+	/* search incrementing 'x' until:
-+	 * weight < 2^(x+1)
-+	 *    n/d < 2^(x+1)
-+	 *	n < d * 2^(x+1)
-+	 */
-+	while ((x < 8) && (numerator >= (denominator << (x + 1))))
-+		x++;
-+	if (x >= 8)
-+		return -ERANGE;
-+	/* because of the subtraction, use '-rounding' */
-+	y = 64 - ROUNDING(denominator << (x + 6), numerator, -rounding);
-+	if (y >= 32)
-+		return -ERANGE;
-+	weight_code->x = x;
-+	weight_code->y = y;
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_ratio2wbfs);
-+
-+int qman_ceetm_set_queue_weight_in_ratio(struct qm_ceetm_cq *cq, u32 ratio)
-+{
-+	struct qm_ceetm_weight_code weight_code;
-+
-+	if (qman_ceetm_ratio2wbfs(ratio, 100, &weight_code, 0)) {
-+		pr_err("Cannot get wbfs code for cq %x\n", cq->idx);
-+		return -EINVAL;
-+	}
-+	return qman_ceetm_set_queue_weight(cq, &weight_code);
-+}
-+EXPORT_SYMBOL(qman_ceetm_set_queue_weight_in_ratio);
-+
-+int qman_ceetm_get_queue_weight_in_ratio(struct qm_ceetm_cq *cq, u32 *ratio)
-+{
-+	struct qm_ceetm_weight_code weight_code;
-+	u32 n, d;
-+
-+	if (qman_ceetm_get_queue_weight(cq, &weight_code)) {
-+		pr_err("Cannot query the weight code for cq%x\n", cq->idx);
-+		return -EINVAL;
-+	}
-+
-+	if (qman_ceetm_wbfs2ratio(&weight_code, &n, &d)) {
-+		pr_err("Cannot get the ratio with wbfs code\n");
-+		return -EINVAL;
-+	}
-+
-+	*ratio = (n * 100) / d;
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_get_queue_weight_in_ratio);
-+
-+int qman_ceetm_cq_get_dequeue_statistics(struct qm_ceetm_cq *cq, u32 flags,
-+					u64 *frame_count, u64 *byte_count)
-+{
-+	struct qm_mcr_ceetm_statistics_query result;
-+	u16 cid, command_type;
-+	enum qm_dc_portal dcp_idx;
-+	int ret;
-+
-+	cid = cpu_to_be16((cq->parent->idx << 4) | cq->idx);
-+	dcp_idx = cq->parent->dcp_idx;
-+	if (flags == QMAN_CEETM_FLAG_CLEAR_STATISTICS_COUNTER)
-+		command_type = CEETM_QUERY_DEQUEUE_CLEAR_STATISTICS;
-+	else
-+		command_type = CEETM_QUERY_DEQUEUE_STATISTICS;
-+
-+	ret = qman_ceetm_query_statistics(cid, dcp_idx, command_type, &result);
-+	if (ret) {
-+		pr_err("Can't query the statistics of CQ#%d!\n", cq->idx);
-+		return -EINVAL;
-+	}
-+
-+	*frame_count = be40_to_cpu(result.frm_cnt);
-+	*byte_count = be48_to_cpu(result.byte_cnt);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_cq_get_dequeue_statistics);
-+
-+int qman_ceetm_drain_cq(struct qm_ceetm_cq *cq)
-+{
-+	struct qm_mcr_ceetm_cq_peek_pop_xsfdrread ppxr;
-+	int ret;
-+
-+	do {
-+		ret = qman_ceetm_cq_peek_pop_xsfdrread(cq, 1, 0, &ppxr);
-+		if (ret) {
-+			pr_err("Failed to pop frame from CQ\n");
-+			return -EINVAL;
-+		}
-+	} while (!(ppxr.stat & 0x2));
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_drain_cq);
-+
-+#define CEETM_LFQMT_LFQID_MSB 0xF00000
-+#define CEETM_LFQMT_LFQID_LSB 0x000FFF
-+int qman_ceetm_lfq_claim(struct qm_ceetm_lfq **lfq,
-+					struct qm_ceetm_cq *cq)
-+{
-+	struct qm_ceetm_lfq *p;
-+	u32 lfqid;
-+	int ret = 0;
-+	struct qm_mcc_ceetm_lfqmt_config lfqmt_config;
-+
-+	if (cq->parent->dcp_idx == qm_dc_portal_fman0) {
-+		ret = qman_alloc_ceetm0_lfqid(&lfqid);
-+	} else if (cq->parent->dcp_idx == qm_dc_portal_fman1) {
-+		ret = qman_alloc_ceetm1_lfqid(&lfqid);
-+	} else {
-+		pr_err("dcp_idx %u does not correspond to a known fman in this driver\n",
-+			cq->parent->dcp_idx);
-+		return -EINVAL;
-+	}
-+
-+	if (ret) {
-+		pr_err("There is no lfqid avalaible for CQ#%d!\n", cq->idx);
-+		return -ENODEV;
-+	}
-+	p = kmalloc(sizeof(*p), GFP_KERNEL);
-+	if (!p)
-+		return -ENOMEM;
-+	p->idx = lfqid;
-+	p->dctidx = (u16)(lfqid & CEETM_LFQMT_LFQID_LSB);
-+	p->parent = cq->parent;
-+	list_add_tail(&p->node, &cq->bound_lfqids);
-+
-+	lfqmt_config.lfqid = cpu_to_be24(CEETM_LFQMT_LFQID_MSB |
-+				(cq->parent->dcp_idx << 16) |
-+				(lfqid & CEETM_LFQMT_LFQID_LSB));
-+	lfqmt_config.cqid = cpu_to_be16((cq->parent->idx << 4) | (cq->idx));
-+	lfqmt_config.dctidx = cpu_to_be16(p->dctidx);
-+	if (qman_ceetm_configure_lfqmt(&lfqmt_config)) {
-+		pr_err("Can't configure LFQMT for LFQID#%d @ CQ#%d\n",
-+				lfqid, cq->idx);
-+		list_del(&p->node);
-+		kfree(p);
-+		return -EINVAL;
-+	}
-+	*lfq = p;
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_lfq_claim);
-+
-+int qman_ceetm_lfq_release(struct qm_ceetm_lfq *lfq)
-+{
-+	if (lfq->parent->dcp_idx == qm_dc_portal_fman0) {
-+		qman_release_ceetm0_lfqid(lfq->idx);
-+	} else if (lfq->parent->dcp_idx == qm_dc_portal_fman1) {
-+		qman_release_ceetm1_lfqid(lfq->idx);
-+	} else {
-+		pr_err("dcp_idx %u does not correspond to a known fman in this driver\n",
-+			lfq->parent->dcp_idx);
-+		return -EINVAL;
-+	}
-+	list_del(&lfq->node);
-+	kfree(lfq);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_lfq_release);
-+
-+int qman_ceetm_lfq_set_context(struct qm_ceetm_lfq *lfq, u64 context_a,
-+							u32 context_b)
-+{
-+	struct qm_mcc_ceetm_dct_config dct_config;
-+	lfq->context_a = context_a;
-+	lfq->context_b = context_b;
-+	dct_config.dctidx = cpu_to_be16((u16)lfq->dctidx);
-+	dct_config.dcpid = lfq->parent->dcp_idx;
-+	dct_config.context_b = cpu_to_be32(context_b);
-+	dct_config.context_a = cpu_to_be64(context_a);
-+
-+	return qman_ceetm_configure_dct(&dct_config);
-+}
-+EXPORT_SYMBOL(qman_ceetm_lfq_set_context);
-+
-+int qman_ceetm_lfq_get_context(struct qm_ceetm_lfq *lfq, u64 *context_a,
-+							u32 *context_b)
-+{
-+	struct qm_mcc_ceetm_dct_query dct_query;
-+	struct qm_mcr_ceetm_dct_query query_result;
-+
-+	dct_query.dctidx = cpu_to_be16(lfq->dctidx);
-+	dct_query.dcpid = lfq->parent->dcp_idx;
-+	if (qman_ceetm_query_dct(&dct_query, &query_result)) {
-+		pr_err("Can't query LFQID#%d's context!\n", lfq->idx);
-+		return -EINVAL;
-+	}
-+	*context_a = be64_to_cpu(query_result.context_a);
-+	*context_b = be32_to_cpu(query_result.context_b);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_lfq_get_context);
-+
-+int qman_ceetm_create_fq(struct qm_ceetm_lfq *lfq, struct qman_fq *fq)
-+{
-+	spin_lock_init(&fq->fqlock);
-+	fq->fqid = lfq->idx;
-+	fq->flags = QMAN_FQ_FLAG_NO_MODIFY;
-+	if (lfq->ern)
-+		fq->cb.ern = lfq->ern;
-+#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
-+	if (unlikely(find_empty_fq_table_entry(&fq->key, fq)))
-+		return -ENOMEM;
-+#endif
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_create_fq);
-+
-+#define MAX_CCG_IDX 0x000F
-+int qman_ceetm_ccg_claim(struct qm_ceetm_ccg **ccg,
-+				struct qm_ceetm_channel *channel,
-+				unsigned int idx,
-+				void (*cscn)(struct qm_ceetm_ccg *,
-+					void *cb_ctx,
-+					int congested),
-+				void *cb_ctx)
-+{
-+	struct qm_ceetm_ccg *p;
-+
-+	if (idx > MAX_CCG_IDX) {
-+		pr_err("The given ccg index is out of range\n");
-+		return -EINVAL;
-+	}
-+
-+	list_for_each_entry(p, &channel->ccgs, node) {
-+		if (p->idx == idx) {
-+			pr_err("The CCG#%d has been claimed\n", idx);
-+			return -EINVAL;
-+		}
-+	}
-+
-+	p = kmalloc(sizeof(*p), GFP_KERNEL);
-+	if (!p) {
-+		pr_err("Can't allocate memory for CCG#%d!\n", idx);
-+		return -ENOMEM;
-+	}
-+
-+	list_add_tail(&p->node, &channel->ccgs);
-+
-+	p->idx = idx;
-+	p->parent = channel;
-+	p->cb = cscn;
-+	p->cb_ctx = cb_ctx;
-+	INIT_LIST_HEAD(&p->cb_node);
-+
-+	*ccg = p;
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_ccg_claim);
-+
-+int qman_ceetm_ccg_release(struct qm_ceetm_ccg *ccg)
-+{
-+	unsigned long irqflags __maybe_unused;
-+	struct qm_mcc_ceetm_ccgr_config config_opts;
-+	int ret = 0;
-+	struct qman_portal *p = get_affine_portal();
-+
-+	memset(&config_opts, 0, sizeof(struct qm_mcc_ceetm_ccgr_config));
-+	spin_lock_irqsave(&p->ccgr_lock, irqflags);
-+	if (!list_empty(&ccg->cb_node))
-+		list_del(&ccg->cb_node);
-+	config_opts.ccgrid = cpu_to_be16(CEETM_CCGR_CM_CONFIGURE |
-+				(ccg->parent->idx << 4) | ccg->idx);
-+	config_opts.dcpid = ccg->parent->dcp_idx;
-+	config_opts.we_mask = cpu_to_be16(QM_CCGR_WE_CSCN_TUPD);
-+	config_opts.cm_config.cscn_tupd = cpu_to_be16(PORTAL_IDX(p));
-+	ret = qman_ceetm_configure_ccgr(&config_opts);
-+	spin_unlock_irqrestore(&p->ccgr_lock, irqflags);
-+	put_affine_portal();
-+
-+	list_del(&ccg->node);
-+	kfree(ccg);
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_ceetm_ccg_release);
-+
-+int qman_ceetm_ccg_set(struct qm_ceetm_ccg *ccg, u16 we_mask,
-+				const struct qm_ceetm_ccg_params *params)
-+{
-+	struct qm_mcc_ceetm_ccgr_config config_opts;
-+	unsigned long irqflags __maybe_unused;
-+	int ret;
-+	struct qman_portal *p;
-+
-+	if (((ccg->parent->idx << 4) | ccg->idx) >= (2 * __CGR_NUM))
-+		return -EINVAL;
-+
-+	p = get_affine_portal();
-+
-+	memset(&config_opts, 0, sizeof(struct qm_mcc_ceetm_ccgr_config));
-+	spin_lock_irqsave(&p->ccgr_lock, irqflags);
-+
-+	config_opts.ccgrid = cpu_to_be16(CEETM_CCGR_CM_CONFIGURE |
-+				(ccg->parent->idx << 4) | ccg->idx);
-+	config_opts.dcpid = ccg->parent->dcp_idx;
-+	config_opts.we_mask = we_mask;
-+	if (we_mask & QM_CCGR_WE_CSCN_EN) {
-+		config_opts.we_mask |= QM_CCGR_WE_CSCN_TUPD;
-+		config_opts.cm_config.cscn_tupd = cpu_to_be16(
-+			QM_CGR_TARG_UDP_CTRL_WRITE_BIT | PORTAL_IDX(p));
-+	}
-+	config_opts.we_mask = cpu_to_be16(config_opts.we_mask);
-+	config_opts.cm_config.ctl_wr_en_g = params->wr_en_g;
-+	config_opts.cm_config.ctl_wr_en_y = params->wr_en_y;
-+	config_opts.cm_config.ctl_wr_en_r = params->wr_en_r;
-+	config_opts.cm_config.ctl_td_en = params->td_en;
-+	config_opts.cm_config.ctl_td_mode = params->td_mode;
-+	config_opts.cm_config.ctl_cscn_en = params->cscn_en;
-+	config_opts.cm_config.ctl_mode = params->mode;
-+	config_opts.cm_config.oal = params->oal;
-+	config_opts.cm_config.cs_thres.hword =
-+					cpu_to_be16(params->cs_thres_in.hword);
-+	config_opts.cm_config.cs_thres_x.hword =
-+					cpu_to_be16(params->cs_thres_out.hword);
-+	config_opts.cm_config.td_thres.hword =
-+					cpu_to_be16(params->td_thres.hword);
-+	config_opts.cm_config.wr_parm_g.word =
-+					cpu_to_be32(params->wr_parm_g.word);
-+	config_opts.cm_config.wr_parm_y.word =
-+					cpu_to_be32(params->wr_parm_y.word);
-+	config_opts.cm_config.wr_parm_r.word =
-+					cpu_to_be32(params->wr_parm_r.word);
-+	ret = qman_ceetm_configure_ccgr(&config_opts);
-+	if (ret) {
-+		pr_err("Configure CCGR CM failed!\n");
-+		goto release_lock;
-+	}
-+
-+	if (we_mask & QM_CCGR_WE_CSCN_EN)
-+		if (list_empty(&ccg->cb_node))
-+			list_add(&ccg->cb_node,
-+				&p->ccgr_cbs[ccg->parent->dcp_idx]);
-+release_lock:
-+	spin_unlock_irqrestore(&p->ccgr_lock, irqflags);
-+	put_affine_portal();
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_ceetm_ccg_set);
-+
-+#define CEETM_CCGR_CTL_MASK 0x01
-+int qman_ceetm_ccg_get(struct qm_ceetm_ccg *ccg,
-+				struct qm_ceetm_ccg_params *params)
-+{
-+	struct qm_mcc_ceetm_ccgr_query query_opts;
-+	struct qm_mcr_ceetm_ccgr_query query_result;
-+
-+	query_opts.ccgrid = cpu_to_be16(CEETM_CCGR_CM_QUERY |
-+				(ccg->parent->idx << 4) | ccg->idx);
-+	query_opts.dcpid = ccg->parent->dcp_idx;
-+
-+	if (qman_ceetm_query_ccgr(&query_opts, &query_result)) {
-+		pr_err("Can't query CCGR#%d\n", ccg->idx);
-+		return -EINVAL;
-+	}
-+
-+	params->wr_parm_r.word = query_result.cm_query.wr_parm_r.word;
-+	params->wr_parm_y.word = query_result.cm_query.wr_parm_y.word;
-+	params->wr_parm_g.word = query_result.cm_query.wr_parm_g.word;
-+	params->td_thres.hword = query_result.cm_query.td_thres.hword;
-+	params->cs_thres_out.hword = query_result.cm_query.cs_thres_x.hword;
-+	params->cs_thres_in.hword = query_result.cm_query.cs_thres.hword;
-+	params->oal = query_result.cm_query.oal;
-+	params->wr_en_g = query_result.cm_query.ctl_wr_en_g;
-+	params->wr_en_y = query_result.cm_query.ctl_wr_en_y;
-+	params->wr_en_r = query_result.cm_query.ctl_wr_en_r;
-+	params->td_en = query_result.cm_query.ctl_td_en;
-+	params->td_mode = query_result.cm_query.ctl_td_mode;
-+	params->cscn_en = query_result.cm_query.ctl_cscn_en;
-+	params->mode = query_result.cm_query.ctl_mode;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_ccg_get);
-+
-+int qman_ceetm_ccg_get_reject_statistics(struct qm_ceetm_ccg *ccg, u32 flags,
-+					u64 *frame_count, u64 *byte_count)
-+{
-+	struct qm_mcr_ceetm_statistics_query result;
-+	u16 cid, command_type;
-+	enum qm_dc_portal dcp_idx;
-+	int ret;
-+
-+	cid = cpu_to_be16((ccg->parent->idx << 4) | ccg->idx);
-+	dcp_idx = ccg->parent->dcp_idx;
-+	if (flags == QMAN_CEETM_FLAG_CLEAR_STATISTICS_COUNTER)
-+		command_type = CEETM_QUERY_REJECT_CLEAR_STATISTICS;
-+	else
-+		command_type = CEETM_QUERY_REJECT_STATISTICS;
-+
-+	ret = qman_ceetm_query_statistics(cid, dcp_idx, command_type, &result);
-+	if (ret) {
-+		pr_err("Can't query the statistics of CCG#%d!\n", ccg->idx);
-+		return -EINVAL;
-+	}
-+
-+	*frame_count = be40_to_cpu(result.frm_cnt);
-+	*byte_count = be48_to_cpu(result.byte_cnt);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_ccg_get_reject_statistics);
-+
-+int qman_ceetm_cscn_swp_get(struct qm_ceetm_ccg *ccg,
-+					u16 swp_idx,
-+					unsigned int *cscn_enabled)
-+{
-+	struct qm_mcc_ceetm_ccgr_query query_opts;
-+	struct qm_mcr_ceetm_ccgr_query query_result;
-+	int i;
-+
-+	DPA_ASSERT(swp_idx < 127);
-+	query_opts.ccgrid = cpu_to_be16(CEETM_CCGR_CM_QUERY |
-+				(ccg->parent->idx << 4) | ccg->idx);
-+	query_opts.dcpid = ccg->parent->dcp_idx;
-+
-+	if (qman_ceetm_query_ccgr(&query_opts, &query_result)) {
-+		pr_err("Can't query CCGR#%d\n", ccg->idx);
-+		return -EINVAL;
-+	}
-+
-+	i = swp_idx / 32;
-+	i = 3 - i;
-+	*cscn_enabled = query_result.cm_query.cscn_targ_swp[i] >>
-+							(31 - swp_idx % 32);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_cscn_swp_get);
-+
-+int qman_ceetm_cscn_dcp_set(struct qm_ceetm_ccg *ccg,
-+				u16 dcp_idx,
-+				u8 vcgid,
-+				unsigned int cscn_enabled,
-+				u16 we_mask,
-+				const struct qm_ceetm_ccg_params *params)
-+{
-+	struct qm_mcc_ceetm_ccgr_config config_opts;
-+	int ret;
-+
-+	config_opts.ccgrid = cpu_to_be16(CEETM_CCGR_CM_CONFIGURE |
-+				(ccg->parent->idx << 4) | ccg->idx);
-+	config_opts.dcpid = ccg->parent->dcp_idx;
-+	config_opts.we_mask = cpu_to_be16(we_mask | QM_CCGR_WE_CSCN_TUPD |
-+						 QM_CCGR_WE_CDV);
-+	config_opts.cm_config.cdv = vcgid;
-+	config_opts.cm_config.cscn_tupd = cpu_to_be16((cscn_enabled << 15) |
-+					QM_CGR_TARG_UDP_CTRL_DCP | dcp_idx);
-+	config_opts.cm_config.ctl_wr_en_g = params->wr_en_g;
-+	config_opts.cm_config.ctl_wr_en_y = params->wr_en_y;
-+	config_opts.cm_config.ctl_wr_en_r = params->wr_en_r;
-+	config_opts.cm_config.ctl_td_en = params->td_en;
-+	config_opts.cm_config.ctl_td_mode = params->td_mode;
-+	config_opts.cm_config.ctl_cscn_en = params->cscn_en;
-+	config_opts.cm_config.ctl_mode = params->mode;
-+	config_opts.cm_config.cs_thres.hword =
-+					cpu_to_be16(params->cs_thres_in.hword);
-+	config_opts.cm_config.cs_thres_x.hword =
-+					cpu_to_be16(params->cs_thres_out.hword);
-+	config_opts.cm_config.td_thres.hword =
-+					cpu_to_be16(params->td_thres.hword);
-+	config_opts.cm_config.wr_parm_g.word =
-+					cpu_to_be32(params->wr_parm_g.word);
-+	config_opts.cm_config.wr_parm_y.word =
-+					cpu_to_be32(params->wr_parm_y.word);
-+	config_opts.cm_config.wr_parm_r.word =
-+					cpu_to_be32(params->wr_parm_r.word);
-+
-+	ret = qman_ceetm_configure_ccgr(&config_opts);
-+	if (ret) {
-+		pr_err("Configure CSCN_TARG_DCP failed!\n");
-+		return -EINVAL;
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_cscn_dcp_set);
-+
-+int qman_ceetm_cscn_dcp_get(struct qm_ceetm_ccg *ccg,
-+				u16 dcp_idx,
-+				u8 *vcgid,
-+				unsigned int *cscn_enabled)
-+{
-+	struct qm_mcc_ceetm_ccgr_query query_opts;
-+	struct qm_mcr_ceetm_ccgr_query query_result;
-+
-+	query_opts.ccgrid = cpu_to_be16(CEETM_CCGR_CM_QUERY |
-+				(ccg->parent->idx << 4) | ccg->idx);
-+	query_opts.dcpid = ccg->parent->dcp_idx;
-+
-+	if (qman_ceetm_query_ccgr(&query_opts, &query_result)) {
-+		pr_err("Can't query CCGR#%d\n", ccg->idx);
-+		return -EINVAL;
-+	}
-+
-+	*vcgid = query_result.cm_query.cdv;
-+	*cscn_enabled = (query_result.cm_query.cscn_targ_dcp >> dcp_idx) & 0x1;
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_ceetm_cscn_dcp_get);
-+
-+int qman_ceetm_querycongestion(struct __qm_mcr_querycongestion *ccg_state,
-+							unsigned int dcp_idx)
-+{
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	u8 res;
-+	int i, j;
-+
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+
-+	mcc = qm_mc_start(&p->p);
-+	for (i = 0; i < 2; i++) {
-+		mcc->ccgr_query.ccgrid =
-+				cpu_to_be16(CEETM_QUERY_CONGESTION_STATE | i);
-+		mcc->ccgr_query.dcpid = dcp_idx;
-+		qm_mc_commit(&p->p, QM_CEETM_VERB_CCGR_QUERY);
-+
-+		while (!(mcr = qm_mc_result(&p->p)))
-+			cpu_relax();
-+		DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) ==
-+						QM_CEETM_VERB_CCGR_QUERY);
-+		res = mcr->result;
-+		if (res == QM_MCR_RESULT_OK) {
-+			for (j = 0; j < 8; j++)
-+				mcr->ccgr_query.congestion_state.state.
-+				__state[j] = be32_to_cpu(mcr->ccgr_query.
-+					congestion_state.state.__state[j]);
-+			*(ccg_state + i) =
-+				mcr->ccgr_query.congestion_state.state;
-+		} else {
-+			pr_err("QUERY CEETM CONGESTION STATE failed\n");
-+			PORTAL_IRQ_UNLOCK(p, irqflags);
-+			return -EIO;
-+		}
-+	}
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	return 0;
-+}
-+
-+int qman_set_wpm(int wpm_enable)
-+{
-+	return qm_set_wpm(wpm_enable);
-+}
-+EXPORT_SYMBOL(qman_set_wpm);
-+
-+int qman_get_wpm(int *wpm_enable)
-+{
-+	return qm_get_wpm(wpm_enable);
-+}
-+EXPORT_SYMBOL(qman_get_wpm);
-+
-+int qman_shutdown_fq(u32 fqid)
-+{
-+	struct qman_portal *p;
-+	unsigned long irqflags __maybe_unused;
-+	int ret;
-+	struct qm_portal *low_p;
-+	p = get_affine_portal();
-+	PORTAL_IRQ_LOCK(p, irqflags);
-+	low_p = &p->p;
-+	ret = qm_shutdown_fq(&low_p, 1, fqid);
-+	PORTAL_IRQ_UNLOCK(p, irqflags);
-+	put_affine_portal();
-+	return ret;
-+}
-+
-+const struct qm_portal_config *qman_get_qm_portal_config(
-+						struct qman_portal *portal)
-+{
-+	return portal->sharing_redirect ? NULL : portal->config;
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/qman_low.h
-@@ -0,0 +1,1427 @@
-+/* Copyright 2008-2011 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "qman_private.h"
-+
-+/***************************/
-+/* Portal register assists */
-+/***************************/
-+
-+/* Cache-inhibited register offsets */
-+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64)
-+
-+#define QM_REG_EQCR_PI_CINH	0x0000
-+#define QM_REG_EQCR_CI_CINH	0x0004
-+#define QM_REG_EQCR_ITR		0x0008
-+#define QM_REG_DQRR_PI_CINH	0x0040
-+#define QM_REG_DQRR_CI_CINH	0x0044
-+#define QM_REG_DQRR_ITR		0x0048
-+#define QM_REG_DQRR_DCAP	0x0050
-+#define QM_REG_DQRR_SDQCR	0x0054
-+#define QM_REG_DQRR_VDQCR	0x0058
-+#define QM_REG_DQRR_PDQCR	0x005c
-+#define QM_REG_MR_PI_CINH	0x0080
-+#define QM_REG_MR_CI_CINH	0x0084
-+#define QM_REG_MR_ITR		0x0088
-+#define QM_REG_CFG		0x0100
-+#define QM_REG_ISR		0x0e00
-+#define QM_REG_IIR              0x0e0c
-+#define QM_REG_ITPR		0x0e14
-+
-+/* Cache-enabled register offsets */
-+#define QM_CL_EQCR		0x0000
-+#define QM_CL_DQRR		0x1000
-+#define QM_CL_MR		0x2000
-+#define QM_CL_EQCR_PI_CENA	0x3000
-+#define QM_CL_EQCR_CI_CENA	0x3100
-+#define QM_CL_DQRR_PI_CENA	0x3200
-+#define QM_CL_DQRR_CI_CENA	0x3300
-+#define QM_CL_MR_PI_CENA	0x3400
-+#define QM_CL_MR_CI_CENA	0x3500
-+#define QM_CL_CR		0x3800
-+#define QM_CL_RR0		0x3900
-+#define QM_CL_RR1		0x3940
-+
-+#endif
-+
-+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+
-+#define QM_REG_EQCR_PI_CINH	0x3000
-+#define QM_REG_EQCR_CI_CINH	0x3040
-+#define QM_REG_EQCR_ITR		0x3080
-+#define QM_REG_DQRR_PI_CINH	0x3100
-+#define QM_REG_DQRR_CI_CINH	0x3140
-+#define QM_REG_DQRR_ITR		0x3180
-+#define QM_REG_DQRR_DCAP	0x31C0
-+#define QM_REG_DQRR_SDQCR	0x3200
-+#define QM_REG_DQRR_VDQCR	0x3240
-+#define QM_REG_DQRR_PDQCR	0x3280
-+#define QM_REG_MR_PI_CINH	0x3300
-+#define QM_REG_MR_CI_CINH	0x3340
-+#define QM_REG_MR_ITR		0x3380
-+#define QM_REG_CFG		0x3500
-+#define QM_REG_ISR		0x3600
-+#define QM_REG_IIR              0x36C0
-+#define QM_REG_ITPR		0x3740
-+
-+/* Cache-enabled register offsets */
-+#define QM_CL_EQCR		0x0000
-+#define QM_CL_DQRR		0x1000
-+#define QM_CL_MR		0x2000
-+#define QM_CL_EQCR_PI_CENA	0x3000
-+#define QM_CL_EQCR_CI_CENA	0x3040
-+#define QM_CL_DQRR_PI_CENA	0x3100
-+#define QM_CL_DQRR_CI_CENA	0x3140
-+#define QM_CL_MR_PI_CENA	0x3300
-+#define QM_CL_MR_CI_CENA	0x3340
-+#define QM_CL_CR		0x3800
-+#define QM_CL_RR0		0x3900
-+#define QM_CL_RR1		0x3940
-+
-+#endif
-+
-+
-+/* BTW, the drivers (and h/w programming model) already obtain the required
-+ * synchronisation for portal accesses via lwsync(), hwsync(), and
-+ * data-dependencies. Use of barrier()s or other order-preserving primitives
-+ * simply degrade performance. Hence the use of the __raw_*() interfaces, which
-+ * simply ensure that the compiler treats the portal registers as volatile (ie.
-+ * non-coherent). */
-+
-+/* Cache-inhibited register access. */
-+#define __qm_in(qm, o)		be32_to_cpu(__raw_readl((qm)->addr_ci  + (o)))
-+#define __qm_out(qm, o, val)	__raw_writel((cpu_to_be32(val)), \
-+					     (qm)->addr_ci + (o));
-+#define qm_in(reg)		__qm_in(&portal->addr, QM_REG_##reg)
-+#define qm_out(reg, val)	__qm_out(&portal->addr, QM_REG_##reg, val)
-+
-+/* Cache-enabled (index) register access */
-+#define __qm_cl_touch_ro(qm, o) dcbt_ro((qm)->addr_ce + (o))
-+#define __qm_cl_touch_rw(qm, o) dcbt_rw((qm)->addr_ce + (o))
-+#define __qm_cl_in(qm, o)	be32_to_cpu(__raw_readl((qm)->addr_ce + (o)))
-+#define __qm_cl_out(qm, o, val) \
-+	do { \
-+		u32 *__tmpclout = (qm)->addr_ce + (o); \
-+		__raw_writel(cpu_to_be32(val), __tmpclout); \
-+		dcbf(__tmpclout); \
-+	} while (0)
-+#define __qm_cl_invalidate(qm, o) dcbi((qm)->addr_ce + (o))
-+#define qm_cl_touch_ro(reg) __qm_cl_touch_ro(&portal->addr, QM_CL_##reg##_CENA)
-+#define qm_cl_touch_rw(reg) __qm_cl_touch_rw(&portal->addr, QM_CL_##reg##_CENA)
-+#define qm_cl_in(reg)	    __qm_cl_in(&portal->addr, QM_CL_##reg##_CENA)
-+#define qm_cl_out(reg, val) __qm_cl_out(&portal->addr, QM_CL_##reg##_CENA, val)
-+#define qm_cl_invalidate(reg)\
-+	__qm_cl_invalidate(&portal->addr, QM_CL_##reg##_CENA)
-+
-+/* Cache-enabled ring access */
-+#define qm_cl(base, idx)	((void *)base + ((idx) << 6))
-+
-+/* Cyclic helper for rings. FIXME: once we are able to do fine-grain perf
-+ * analysis, look at using the "extra" bit in the ring index registers to avoid
-+ * cyclic issues. */
-+static inline u8 qm_cyc_diff(u8 ringsize, u8 first, u8 last)
-+{
-+	/* 'first' is included, 'last' is excluded */
-+	if (first <= last)
-+		return last - first;
-+	return ringsize + last - first;
-+}
-+
-+/* Portal modes.
-+ *   Enum types;
-+ *     pmode == production mode
-+ *     cmode == consumption mode,
-+ *     dmode == h/w dequeue mode.
-+ *   Enum values use 3 letter codes. First letter matches the portal mode,
-+ *   remaining two letters indicate;
-+ *     ci == cache-inhibited portal register
-+ *     ce == cache-enabled portal register
-+ *     vb == in-band valid-bit (cache-enabled)
-+ *     dc == DCA (Discrete Consumption Acknowledgement), DQRR-only
-+ *   As for "enum qm_dqrr_dmode", it should be self-explanatory.
-+ */
-+enum qm_eqcr_pmode {		/* matches QCSP_CFG::EPM */
-+	qm_eqcr_pci = 0,	/* PI index, cache-inhibited */
-+	qm_eqcr_pce = 1,	/* PI index, cache-enabled */
-+	qm_eqcr_pvb = 2		/* valid-bit */
-+};
-+enum qm_dqrr_dmode {		/* matches QCSP_CFG::DP */
-+	qm_dqrr_dpush = 0,	/* SDQCR  + VDQCR */
-+	qm_dqrr_dpull = 1	/* PDQCR */
-+};
-+enum qm_dqrr_pmode {		/* s/w-only */
-+	qm_dqrr_pci,		/* reads DQRR_PI_CINH */
-+	qm_dqrr_pce,		/* reads DQRR_PI_CENA */
-+	qm_dqrr_pvb		/* reads valid-bit */
-+};
-+enum qm_dqrr_cmode {		/* matches QCSP_CFG::DCM */
-+	qm_dqrr_cci = 0,	/* CI index, cache-inhibited */
-+	qm_dqrr_cce = 1,	/* CI index, cache-enabled */
-+	qm_dqrr_cdc = 2		/* Discrete Consumption Acknowledgement */
-+};
-+enum qm_mr_pmode {		/* s/w-only */
-+	qm_mr_pci,		/* reads MR_PI_CINH */
-+	qm_mr_pce,		/* reads MR_PI_CENA */
-+	qm_mr_pvb		/* reads valid-bit */
-+};
-+enum qm_mr_cmode {		/* matches QCSP_CFG::MM */
-+	qm_mr_cci = 0,		/* CI index, cache-inhibited */
-+	qm_mr_cce = 1		/* CI index, cache-enabled */
-+};
-+
-+
-+/* ------------------------- */
-+/* --- Portal structures --- */
-+
-+#define QM_EQCR_SIZE		8
-+#define QM_DQRR_SIZE		16
-+#define QM_MR_SIZE		8
-+
-+struct qm_eqcr {
-+	struct qm_eqcr_entry *ring, *cursor;
-+	u8 ci, available, ithresh, vbit;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	u32 busy;
-+	enum qm_eqcr_pmode pmode;
-+#endif
-+};
-+
-+struct qm_dqrr {
-+	const struct qm_dqrr_entry *ring, *cursor;
-+	u8 pi, ci, fill, ithresh, vbit;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	enum qm_dqrr_dmode dmode;
-+	enum qm_dqrr_pmode pmode;
-+	enum qm_dqrr_cmode cmode;
-+#endif
-+};
-+
-+struct qm_mr {
-+	const struct qm_mr_entry *ring, *cursor;
-+	u8 pi, ci, fill, ithresh, vbit;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	enum qm_mr_pmode pmode;
-+	enum qm_mr_cmode cmode;
-+#endif
-+};
-+
-+struct qm_mc {
-+	struct qm_mc_command *cr;
-+	struct qm_mc_result *rr;
-+	u8 rridx, vbit;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	enum {
-+		/* Can be _mc_start()ed */
-+		qman_mc_idle,
-+		/* Can be _mc_commit()ed or _mc_abort()ed */
-+		qman_mc_user,
-+		/* Can only be _mc_retry()ed */
-+		qman_mc_hw
-+	} state;
-+#endif
-+};
-+
-+#define QM_PORTAL_ALIGNMENT ____cacheline_aligned
-+
-+struct qm_addr {
-+	void __iomem *addr_ce;	/* cache-enabled */
-+	void __iomem *addr_ci;	/* cache-inhibited */
-+};
-+
-+struct qm_portal {
-+	/* In the non-CONFIG_FSL_DPA_CHECKING case, the following stuff up to
-+	 * and including 'mc' fits within a cacheline (yay!). The 'config' part
-+	 * is setup-only, so isn't a cause for a concern. In other words, don't
-+	 * rearrange this structure on a whim, there be dragons ... */
-+	struct qm_addr addr;
-+	struct qm_eqcr eqcr;
-+	struct qm_dqrr dqrr;
-+	struct qm_mr mr;
-+	struct qm_mc mc;
-+} QM_PORTAL_ALIGNMENT;
-+
-+
-+/* ---------------- */
-+/* --- EQCR API --- */
-+
-+/* Bit-wise logic to wrap a ring pointer by clearing the "carry bit" */
-+#define EQCR_CARRYCLEAR(p) \
-+	(void *)((unsigned long)(p) & (~(unsigned long)(QM_EQCR_SIZE << 6)))
-+
-+/* Bit-wise logic to convert a ring pointer to a ring index */
-+static inline u8 EQCR_PTR2IDX(struct qm_eqcr_entry *e)
-+{
-+	return ((uintptr_t)e >> 6) & (QM_EQCR_SIZE - 1);
-+}
-+
-+/* Increment the 'cursor' ring pointer, taking 'vbit' into account */
-+static inline void EQCR_INC(struct qm_eqcr *eqcr)
-+{
-+	/* NB: this is odd-looking, but experiments show that it generates fast
-+	 * code with essentially no branching overheads. We increment to the
-+	 * next EQCR pointer and handle overflow and 'vbit'. */
-+	struct qm_eqcr_entry *partial = eqcr->cursor + 1;
-+	eqcr->cursor = EQCR_CARRYCLEAR(partial);
-+	if (partial != eqcr->cursor)
-+		eqcr->vbit ^= QM_EQCR_VERB_VBIT;
-+}
-+
-+static inline int qm_eqcr_init(struct qm_portal *portal,
-+				enum qm_eqcr_pmode pmode,
-+				unsigned int eq_stash_thresh,
-+				int eq_stash_prio)
-+{
-+	/* This use of 'register', as well as all other occurrences, is because
-+	 * it has been observed to generate much faster code with gcc than is
-+	 * otherwise the case. */
-+	register struct qm_eqcr *eqcr = &portal->eqcr;
-+	u32 cfg;
-+	u8 pi;
-+
-+	eqcr->ring = portal->addr.addr_ce + QM_CL_EQCR;
-+	eqcr->ci = qm_in(EQCR_CI_CINH) & (QM_EQCR_SIZE - 1);
-+	qm_cl_invalidate(EQCR_CI);
-+	pi = qm_in(EQCR_PI_CINH) & (QM_EQCR_SIZE - 1);
-+	eqcr->cursor = eqcr->ring + pi;
-+	eqcr->vbit = (qm_in(EQCR_PI_CINH) & QM_EQCR_SIZE) ?
-+			QM_EQCR_VERB_VBIT : 0;
-+	eqcr->available = QM_EQCR_SIZE - 1 -
-+			qm_cyc_diff(QM_EQCR_SIZE, eqcr->ci, pi);
-+	eqcr->ithresh = qm_in(EQCR_ITR);
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	eqcr->busy = 0;
-+	eqcr->pmode = pmode;
-+#endif
-+	cfg = (qm_in(CFG) & 0x00ffffff) |
-+		(eq_stash_thresh << 28) | /* QCSP_CFG: EST */
-+		(eq_stash_prio << 26)	| /* QCSP_CFG: EP */
-+		((pmode & 0x3) << 24);	/* QCSP_CFG::EPM */
-+	qm_out(CFG, cfg);
-+	return 0;
-+}
-+
-+static inline unsigned int qm_eqcr_get_ci_stashing(struct qm_portal *portal)
-+{
-+	return (qm_in(CFG) >> 28) & 0x7;
-+}
-+
-+static inline void qm_eqcr_finish(struct qm_portal *portal)
-+{
-+	register struct qm_eqcr *eqcr = &portal->eqcr;
-+	u8 pi, ci;
-+	u32 cfg;
-+
-+	/*
-+	 * Disable EQCI stashing because the QMan only
-+	 * presents the value it previously stashed to
-+	 * maintain coherency.  Setting the stash threshold
-+	 * to 1 then 0 ensures that QMan has resyncronized
-+	 * its internal copy so that the portal is clean
-+	 * when it is reinitialized in the future
-+	 */
-+	cfg = (qm_in(CFG) & 0x0fffffff) |
-+		(1 << 28); /* QCSP_CFG: EST */
-+	qm_out(CFG, cfg);
-+	cfg &= 0x0fffffff; /* stash threshold = 0 */
-+	qm_out(CFG, cfg);
-+
-+	pi = qm_in(EQCR_PI_CINH) & (QM_EQCR_SIZE - 1);
-+	ci = qm_in(EQCR_CI_CINH) & (QM_EQCR_SIZE - 1);
-+
-+	/* Refresh EQCR CI cache value */
-+	qm_cl_invalidate(EQCR_CI);
-+	eqcr->ci = qm_cl_in(EQCR_CI) & (QM_EQCR_SIZE - 1);
-+
-+	DPA_ASSERT(!eqcr->busy);
-+	if (pi != EQCR_PTR2IDX(eqcr->cursor))
-+		pr_crit("losing uncommited EQCR entries\n");
-+	if (ci != eqcr->ci)
-+		pr_crit("missing existing EQCR completions\n");
-+	if (eqcr->ci != EQCR_PTR2IDX(eqcr->cursor))
-+		pr_crit("EQCR destroyed unquiesced\n");
-+}
-+
-+static inline struct qm_eqcr_entry *qm_eqcr_start_no_stash(struct qm_portal
-+								 *portal)
-+{
-+	register struct qm_eqcr *eqcr = &portal->eqcr;
-+	DPA_ASSERT(!eqcr->busy);
-+	if (!eqcr->available)
-+		return NULL;
-+
-+
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	eqcr->busy = 1;
-+#endif
-+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64)
-+	dcbz_64(eqcr->cursor);
-+#endif
-+	return eqcr->cursor;
-+}
-+
-+static inline struct qm_eqcr_entry *qm_eqcr_start_stash(struct qm_portal
-+								*portal)
-+{
-+	register struct qm_eqcr *eqcr = &portal->eqcr;
-+	u8 diff, old_ci;
-+
-+	DPA_ASSERT(!eqcr->busy);
-+	if (!eqcr->available) {
-+		old_ci = eqcr->ci;
-+		eqcr->ci = qm_cl_in(EQCR_CI) & (QM_EQCR_SIZE - 1);
-+		diff = qm_cyc_diff(QM_EQCR_SIZE, old_ci, eqcr->ci);
-+		eqcr->available += diff;
-+		if (!diff)
-+			return NULL;
-+	}
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	eqcr->busy = 1;
-+#endif
-+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64)
-+	dcbz_64(eqcr->cursor);
-+#endif
-+	return eqcr->cursor;
-+}
-+
-+static inline void qm_eqcr_abort(struct qm_portal *portal)
-+{
-+	__maybe_unused register struct qm_eqcr *eqcr = &portal->eqcr;
-+	DPA_ASSERT(eqcr->busy);
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	eqcr->busy = 0;
-+#endif
-+}
-+
-+static inline struct qm_eqcr_entry *qm_eqcr_pend_and_next(
-+					struct qm_portal *portal, u8 myverb)
-+{
-+	register struct qm_eqcr *eqcr = &portal->eqcr;
-+	DPA_ASSERT(eqcr->busy);
-+	DPA_ASSERT(eqcr->pmode != qm_eqcr_pvb);
-+	if (eqcr->available == 1)
-+		return NULL;
-+	eqcr->cursor->__dont_write_directly__verb = myverb | eqcr->vbit;
-+	dcbf(eqcr->cursor);
-+	EQCR_INC(eqcr);
-+	eqcr->available--;
-+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64)
-+	dcbz_64(eqcr->cursor);
-+#endif
-+	return eqcr->cursor;
-+}
-+
-+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
-+#define EQCR_COMMIT_CHECKS(eqcr) \
-+do { \
-+	DPA_ASSERT(eqcr->busy); \
-+	DPA_ASSERT(eqcr->cursor->orp == (eqcr->cursor->orp & 0xffffff00)); \
-+	DPA_ASSERT(eqcr->cursor->fqid == (eqcr->cursor->fqid & 0xffffff00)); \
-+} while (0)
-+#else
-+#define EQCR_COMMIT_CHECKS(eqcr) \
-+do { \
-+	DPA_ASSERT(eqcr->busy); \
-+	DPA_ASSERT(eqcr->cursor->orp == (eqcr->cursor->orp & \
-+					cpu_to_be32(0x00ffffff))); \
-+	DPA_ASSERT(eqcr->cursor->fqid == (eqcr->cursor->fqid & \
-+					cpu_to_be32(0x00ffffff))); \
-+} while (0)
-+#endif
-+
-+static inline void qm_eqcr_pci_commit(struct qm_portal *portal, u8 myverb)
-+{
-+	register struct qm_eqcr *eqcr = &portal->eqcr;
-+	EQCR_COMMIT_CHECKS(eqcr);
-+	DPA_ASSERT(eqcr->pmode == qm_eqcr_pci);
-+	eqcr->cursor->__dont_write_directly__verb = myverb | eqcr->vbit;
-+	EQCR_INC(eqcr);
-+	eqcr->available--;
-+	dcbf(eqcr->cursor);
-+	hwsync();
-+	qm_out(EQCR_PI_CINH, EQCR_PTR2IDX(eqcr->cursor));
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	eqcr->busy = 0;
-+#endif
-+}
-+
-+static inline void qm_eqcr_pce_prefetch(struct qm_portal *portal)
-+{
-+	__maybe_unused register struct qm_eqcr *eqcr = &portal->eqcr;
-+	DPA_ASSERT(eqcr->pmode == qm_eqcr_pce);
-+	qm_cl_invalidate(EQCR_PI);
-+	qm_cl_touch_rw(EQCR_PI);
-+}
-+
-+static inline void qm_eqcr_pce_commit(struct qm_portal *portal, u8 myverb)
-+{
-+	register struct qm_eqcr *eqcr = &portal->eqcr;
-+	EQCR_COMMIT_CHECKS(eqcr);
-+	DPA_ASSERT(eqcr->pmode == qm_eqcr_pce);
-+	eqcr->cursor->__dont_write_directly__verb = myverb | eqcr->vbit;
-+	EQCR_INC(eqcr);
-+	eqcr->available--;
-+	dcbf(eqcr->cursor);
-+	lwsync();
-+	qm_cl_out(EQCR_PI, EQCR_PTR2IDX(eqcr->cursor));
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	eqcr->busy = 0;
-+#endif
-+}
-+
-+static inline void qm_eqcr_pvb_commit(struct qm_portal *portal, u8 myverb)
-+{
-+	register struct qm_eqcr *eqcr = &portal->eqcr;
-+	struct qm_eqcr_entry *eqcursor;
-+	EQCR_COMMIT_CHECKS(eqcr);
-+	DPA_ASSERT(eqcr->pmode == qm_eqcr_pvb);
-+	lwsync();
-+	eqcursor = eqcr->cursor;
-+	eqcursor->__dont_write_directly__verb = myverb | eqcr->vbit;
-+	dcbf(eqcursor);
-+	EQCR_INC(eqcr);
-+	eqcr->available--;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	eqcr->busy = 0;
-+#endif
-+}
-+
-+static inline u8 qm_eqcr_cci_update(struct qm_portal *portal)
-+{
-+	register struct qm_eqcr *eqcr = &portal->eqcr;
-+	u8 diff, old_ci = eqcr->ci;
-+	eqcr->ci = qm_in(EQCR_CI_CINH) & (QM_EQCR_SIZE - 1);
-+	diff = qm_cyc_diff(QM_EQCR_SIZE, old_ci, eqcr->ci);
-+	eqcr->available += diff;
-+	return diff;
-+}
-+
-+static inline void qm_eqcr_cce_prefetch(struct qm_portal *portal)
-+{
-+	__maybe_unused register struct qm_eqcr *eqcr = &portal->eqcr;
-+	qm_cl_touch_ro(EQCR_CI);
-+}
-+
-+static inline u8 qm_eqcr_cce_update(struct qm_portal *portal)
-+{
-+	register struct qm_eqcr *eqcr = &portal->eqcr;
-+	u8 diff, old_ci = eqcr->ci;
-+	eqcr->ci = qm_cl_in(EQCR_CI) & (QM_EQCR_SIZE - 1);
-+	qm_cl_invalidate(EQCR_CI);
-+	diff = qm_cyc_diff(QM_EQCR_SIZE, old_ci, eqcr->ci);
-+	eqcr->available += diff;
-+	return diff;
-+}
-+
-+static inline u8 qm_eqcr_get_ithresh(struct qm_portal *portal)
-+{
-+	register struct qm_eqcr *eqcr = &portal->eqcr;
-+	return eqcr->ithresh;
-+}
-+
-+static inline void qm_eqcr_set_ithresh(struct qm_portal *portal, u8 ithresh)
-+{
-+	register struct qm_eqcr *eqcr = &portal->eqcr;
-+	eqcr->ithresh = ithresh;
-+	qm_out(EQCR_ITR, ithresh);
-+}
-+
-+static inline u8 qm_eqcr_get_avail(struct qm_portal *portal)
-+{
-+	register struct qm_eqcr *eqcr = &portal->eqcr;
-+	return eqcr->available;
-+}
-+
-+static inline u8 qm_eqcr_get_fill(struct qm_portal *portal)
-+{
-+	register struct qm_eqcr *eqcr = &portal->eqcr;
-+	return QM_EQCR_SIZE - 1 - eqcr->available;
-+}
-+
-+
-+/* ---------------- */
-+/* --- DQRR API --- */
-+
-+/* FIXME: many possible improvements;
-+ * - look at changing the API to use pointer rather than index parameters now
-+ *   that 'cursor' is a pointer,
-+ * - consider moving other parameters to pointer if it could help (ci)
-+ */
-+
-+#define DQRR_CARRYCLEAR(p) \
-+	(void *)((unsigned long)(p) & (~(unsigned long)(QM_DQRR_SIZE << 6)))
-+
-+static inline u8 DQRR_PTR2IDX(const struct qm_dqrr_entry *e)
-+{
-+	return ((uintptr_t)e >> 6) & (QM_DQRR_SIZE - 1);
-+}
-+
-+static inline const struct qm_dqrr_entry *DQRR_INC(
-+						const struct qm_dqrr_entry *e)
-+{
-+	return DQRR_CARRYCLEAR(e + 1);
-+}
-+
-+static inline void qm_dqrr_set_maxfill(struct qm_portal *portal, u8 mf)
-+{
-+	qm_out(CFG, (qm_in(CFG) & 0xff0fffff) |
-+		((mf & (QM_DQRR_SIZE - 1)) << 20));
-+}
-+
-+static inline void qm_dqrr_cci_consume(struct qm_portal *portal, u8 num)
-+{
-+	register struct qm_dqrr *dqrr = &portal->dqrr;
-+	DPA_ASSERT(dqrr->cmode == qm_dqrr_cci);
-+	dqrr->ci = (dqrr->ci + num) & (QM_DQRR_SIZE - 1);
-+	qm_out(DQRR_CI_CINH, dqrr->ci);
-+}
-+
-+static inline void qm_dqrr_cce_consume(struct qm_portal *portal, u8 num)
-+{
-+	register struct qm_dqrr *dqrr = &portal->dqrr;
-+	DPA_ASSERT(dqrr->cmode == qm_dqrr_cce);
-+	dqrr->ci = (dqrr->ci + num) & (QM_DQRR_SIZE - 1);
-+	qm_cl_out(DQRR_CI, dqrr->ci);
-+}
-+
-+static inline void qm_dqrr_cdc_consume_n(struct qm_portal *portal, u16 bitmask)
-+{
-+	__maybe_unused register struct qm_dqrr *dqrr = &portal->dqrr;
-+	DPA_ASSERT(dqrr->cmode == qm_dqrr_cdc);
-+	qm_out(DQRR_DCAP, (1 << 8) |		/* DQRR_DCAP::S */
-+		((u32)bitmask << 16));		/* DQRR_DCAP::DCAP_CI */
-+	dqrr->ci = qm_in(DQRR_CI_CINH) & (QM_DQRR_SIZE - 1);
-+	dqrr->fill = qm_cyc_diff(QM_DQRR_SIZE, dqrr->ci, dqrr->pi);
-+}
-+
-+static inline int qm_dqrr_init(struct qm_portal *portal,
-+				const struct qm_portal_config *config,
-+				enum qm_dqrr_dmode dmode,
-+				__maybe_unused enum qm_dqrr_pmode pmode,
-+				enum qm_dqrr_cmode cmode, u8 max_fill)
-+{
-+	register struct qm_dqrr *dqrr = &portal->dqrr;
-+	u32 cfg;
-+
-+	/* Make sure the DQRR will be idle when we enable */
-+	qm_out(DQRR_SDQCR, 0);
-+	qm_out(DQRR_VDQCR, 0);
-+	qm_out(DQRR_PDQCR, 0);
-+	dqrr->ring = portal->addr.addr_ce + QM_CL_DQRR;
-+	dqrr->pi = qm_in(DQRR_PI_CINH) & (QM_DQRR_SIZE - 1);
-+	dqrr->ci = qm_in(DQRR_CI_CINH) & (QM_DQRR_SIZE - 1);
-+	dqrr->cursor = dqrr->ring + dqrr->ci;
-+	dqrr->fill = qm_cyc_diff(QM_DQRR_SIZE, dqrr->ci, dqrr->pi);
-+	dqrr->vbit = (qm_in(DQRR_PI_CINH) & QM_DQRR_SIZE) ?
-+			QM_DQRR_VERB_VBIT : 0;
-+	dqrr->ithresh = qm_in(DQRR_ITR);
-+
-+	/* Free up pending DQRR entries if any as per current DCM */
-+	if (dqrr->fill) {
-+		enum qm_dqrr_cmode dcm = (qm_in(CFG) >> 16) & 3;
-+
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+		dqrr->cmode = dcm;
-+#endif
-+		switch (dcm) {
-+		case qm_dqrr_cci:
-+			qm_dqrr_cci_consume(portal, dqrr->fill);
-+			break;
-+		case qm_dqrr_cce:
-+			qm_dqrr_cce_consume(portal, dqrr->fill);
-+			break;
-+		case qm_dqrr_cdc:
-+			qm_dqrr_cdc_consume_n(portal, (QM_DQRR_SIZE - 1));
-+			break;
-+		default:
-+			DPA_ASSERT(0);
-+		}
-+	}
-+
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	dqrr->dmode = dmode;
-+	dqrr->pmode = pmode;
-+	dqrr->cmode = cmode;
-+#endif
-+	/* Invalidate every ring entry before beginning */
-+	for (cfg = 0; cfg < QM_DQRR_SIZE; cfg++)
-+		dcbi(qm_cl(dqrr->ring, cfg));
-+	cfg = (qm_in(CFG) & 0xff000f00) |
-+		((max_fill & (QM_DQRR_SIZE - 1)) << 20) | /* DQRR_MF */
-+		((dmode & 1) << 18) |			/* DP */
-+		((cmode & 3) << 16) |			/* DCM */
-+		0xa0 |					/* RE+SE */
-+		(0 ? 0x40 : 0) |			/* Ignore RP */
-+		(0 ? 0x10 : 0);				/* Ignore SP */
-+	qm_out(CFG, cfg);
-+	qm_dqrr_set_maxfill(portal, max_fill);
-+	return 0;
-+}
-+
-+static inline void qm_dqrr_finish(struct qm_portal *portal)
-+{
-+	__maybe_unused register struct qm_dqrr *dqrr = &portal->dqrr;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	if ((dqrr->cmode != qm_dqrr_cdc) &&
-+			(dqrr->ci != DQRR_PTR2IDX(dqrr->cursor)))
-+		pr_crit("Ignoring completed DQRR entries\n");
-+#endif
-+}
-+
-+static inline const struct qm_dqrr_entry *qm_dqrr_current(
-+						struct qm_portal *portal)
-+{
-+	register struct qm_dqrr *dqrr = &portal->dqrr;
-+	if (!dqrr->fill)
-+		return NULL;
-+	return dqrr->cursor;
-+}
-+
-+static inline u8 qm_dqrr_cursor(struct qm_portal *portal)
-+{
-+	register struct qm_dqrr *dqrr = &portal->dqrr;
-+	return DQRR_PTR2IDX(dqrr->cursor);
-+}
-+
-+static inline u8 qm_dqrr_next(struct qm_portal *portal)
-+{
-+	register struct qm_dqrr *dqrr = &portal->dqrr;
-+	DPA_ASSERT(dqrr->fill);
-+	dqrr->cursor = DQRR_INC(dqrr->cursor);
-+	return --dqrr->fill;
-+}
-+
-+static inline u8 qm_dqrr_pci_update(struct qm_portal *portal)
-+{
-+	register struct qm_dqrr *dqrr = &portal->dqrr;
-+	u8 diff, old_pi = dqrr->pi;
-+	DPA_ASSERT(dqrr->pmode == qm_dqrr_pci);
-+	dqrr->pi = qm_in(DQRR_PI_CINH) & (QM_DQRR_SIZE - 1);
-+	diff = qm_cyc_diff(QM_DQRR_SIZE, old_pi, dqrr->pi);
-+	dqrr->fill += diff;
-+	return diff;
-+}
-+
-+static inline void qm_dqrr_pce_prefetch(struct qm_portal *portal)
-+{
-+	__maybe_unused register struct qm_dqrr *dqrr = &portal->dqrr;
-+	DPA_ASSERT(dqrr->pmode == qm_dqrr_pce);
-+	qm_cl_invalidate(DQRR_PI);
-+	qm_cl_touch_ro(DQRR_PI);
-+}
-+
-+static inline u8 qm_dqrr_pce_update(struct qm_portal *portal)
-+{
-+	register struct qm_dqrr *dqrr = &portal->dqrr;
-+	u8 diff, old_pi = dqrr->pi;
-+	DPA_ASSERT(dqrr->pmode == qm_dqrr_pce);
-+	dqrr->pi = qm_cl_in(DQRR_PI) & (QM_DQRR_SIZE - 1);
-+	diff = qm_cyc_diff(QM_DQRR_SIZE, old_pi, dqrr->pi);
-+	dqrr->fill += diff;
-+	return diff;
-+}
-+
-+static inline void qm_dqrr_pvb_update(struct qm_portal *portal)
-+{
-+	register struct qm_dqrr *dqrr = &portal->dqrr;
-+	const struct qm_dqrr_entry *res = qm_cl(dqrr->ring, dqrr->pi);
-+	DPA_ASSERT(dqrr->pmode == qm_dqrr_pvb);
-+#if (defined CONFIG_PPC || defined CONFIG_PPC64) && !defined CONFIG_FSL_PAMU
-+	/*
-+	 * On PowerPC platforms if PAMU is not available we need to
-+	 * manually invalidate the cache. When PAMU is available the
-+	 * cache is updated by stashing operations generated by QMan
-+	 */
-+	dcbi(res);
-+	dcbt_ro(res);
-+#endif
-+
-+	/* when accessing 'verb', use __raw_readb() to ensure that compiler
-+	 * inlining doesn't try to optimise out "excess reads". */
-+	if ((__raw_readb(&res->verb) & QM_DQRR_VERB_VBIT) == dqrr->vbit) {
-+		dqrr->pi = (dqrr->pi + 1) & (QM_DQRR_SIZE - 1);
-+		if (!dqrr->pi)
-+			dqrr->vbit ^= QM_DQRR_VERB_VBIT;
-+		dqrr->fill++;
-+	}
-+}
-+
-+
-+static inline void qm_dqrr_cci_consume_to_current(struct qm_portal *portal)
-+{
-+	register struct qm_dqrr *dqrr = &portal->dqrr;
-+	DPA_ASSERT(dqrr->cmode == qm_dqrr_cci);
-+	dqrr->ci = DQRR_PTR2IDX(dqrr->cursor);
-+	qm_out(DQRR_CI_CINH, dqrr->ci);
-+}
-+
-+static inline void qm_dqrr_cce_prefetch(struct qm_portal *portal)
-+{
-+	__maybe_unused register struct qm_dqrr *dqrr = &portal->dqrr;
-+	DPA_ASSERT(dqrr->cmode == qm_dqrr_cce);
-+	qm_cl_invalidate(DQRR_CI);
-+	qm_cl_touch_rw(DQRR_CI);
-+}
-+
-+static inline void qm_dqrr_cce_consume_to_current(struct qm_portal *portal)
-+{
-+	register struct qm_dqrr *dqrr = &portal->dqrr;
-+	DPA_ASSERT(dqrr->cmode == qm_dqrr_cce);
-+	dqrr->ci = DQRR_PTR2IDX(dqrr->cursor);
-+	qm_cl_out(DQRR_CI, dqrr->ci);
-+}
-+
-+static inline void qm_dqrr_cdc_consume_1(struct qm_portal *portal, u8 idx,
-+					int park)
-+{
-+	__maybe_unused register struct qm_dqrr *dqrr = &portal->dqrr;
-+	DPA_ASSERT(dqrr->cmode == qm_dqrr_cdc);
-+	DPA_ASSERT(idx < QM_DQRR_SIZE);
-+	qm_out(DQRR_DCAP, (0 << 8) |	/* S */
-+		((park ? 1 : 0) << 6) |	/* PK */
-+		idx);			/* DCAP_CI */
-+}
-+
-+static inline void qm_dqrr_cdc_consume_1ptr(struct qm_portal *portal,
-+					const struct qm_dqrr_entry *dq,
-+					int park)
-+{
-+	__maybe_unused register struct qm_dqrr *dqrr = &portal->dqrr;
-+	u8 idx = DQRR_PTR2IDX(dq);
-+	DPA_ASSERT(dqrr->cmode == qm_dqrr_cdc);
-+	DPA_ASSERT((dqrr->ring + idx) == dq);
-+	DPA_ASSERT(idx < QM_DQRR_SIZE);
-+	qm_out(DQRR_DCAP, (0 << 8) |		/* DQRR_DCAP::S */
-+		((park ? 1 : 0) << 6) |		/* DQRR_DCAP::PK */
-+		idx);				/* DQRR_DCAP::DCAP_CI */
-+}
-+
-+static inline u8 qm_dqrr_cdc_cci(struct qm_portal *portal)
-+{
-+	__maybe_unused register struct qm_dqrr *dqrr = &portal->dqrr;
-+	DPA_ASSERT(dqrr->cmode == qm_dqrr_cdc);
-+	return qm_in(DQRR_CI_CINH) & (QM_DQRR_SIZE - 1);
-+}
-+
-+static inline void qm_dqrr_cdc_cce_prefetch(struct qm_portal *portal)
-+{
-+	__maybe_unused register struct qm_dqrr *dqrr = &portal->dqrr;
-+	DPA_ASSERT(dqrr->cmode == qm_dqrr_cdc);
-+	qm_cl_invalidate(DQRR_CI);
-+	qm_cl_touch_ro(DQRR_CI);
-+}
-+
-+static inline u8 qm_dqrr_cdc_cce(struct qm_portal *portal)
-+{
-+	__maybe_unused register struct qm_dqrr *dqrr = &portal->dqrr;
-+	DPA_ASSERT(dqrr->cmode == qm_dqrr_cdc);
-+	return qm_cl_in(DQRR_CI) & (QM_DQRR_SIZE - 1);
-+}
-+
-+static inline u8 qm_dqrr_get_ci(struct qm_portal *portal)
-+{
-+	register struct qm_dqrr *dqrr = &portal->dqrr;
-+	DPA_ASSERT(dqrr->cmode != qm_dqrr_cdc);
-+	return dqrr->ci;
-+}
-+
-+static inline void qm_dqrr_park(struct qm_portal *portal, u8 idx)
-+{
-+	__maybe_unused register struct qm_dqrr *dqrr = &portal->dqrr;
-+	DPA_ASSERT(dqrr->cmode != qm_dqrr_cdc);
-+	qm_out(DQRR_DCAP, (0 << 8) |		/* S */
-+		(1 << 6) |			/* PK */
-+		(idx & (QM_DQRR_SIZE - 1)));	/* DCAP_CI */
-+}
-+
-+static inline void qm_dqrr_park_current(struct qm_portal *portal)
-+{
-+	register struct qm_dqrr *dqrr = &portal->dqrr;
-+	DPA_ASSERT(dqrr->cmode != qm_dqrr_cdc);
-+	qm_out(DQRR_DCAP, (0 << 8) |		/* S */
-+		(1 << 6) |			/* PK */
-+		DQRR_PTR2IDX(dqrr->cursor));	/* DCAP_CI */
-+}
-+
-+static inline void qm_dqrr_sdqcr_set(struct qm_portal *portal, u32 sdqcr)
-+{
-+	qm_out(DQRR_SDQCR, sdqcr);
-+}
-+
-+static inline u32 qm_dqrr_sdqcr_get(struct qm_portal *portal)
-+{
-+	return qm_in(DQRR_SDQCR);
-+}
-+
-+static inline void qm_dqrr_vdqcr_set(struct qm_portal *portal, u32 vdqcr)
-+{
-+	qm_out(DQRR_VDQCR, vdqcr);
-+}
-+
-+static inline u32 qm_dqrr_vdqcr_get(struct qm_portal *portal)
-+{
-+	return qm_in(DQRR_VDQCR);
-+}
-+
-+static inline void qm_dqrr_pdqcr_set(struct qm_portal *portal, u32 pdqcr)
-+{
-+	qm_out(DQRR_PDQCR, pdqcr);
-+}
-+
-+static inline u32 qm_dqrr_pdqcr_get(struct qm_portal *portal)
-+{
-+	return qm_in(DQRR_PDQCR);
-+}
-+
-+static inline u8 qm_dqrr_get_ithresh(struct qm_portal *portal)
-+{
-+	register struct qm_dqrr *dqrr = &portal->dqrr;
-+	return dqrr->ithresh;
-+}
-+
-+static inline void qm_dqrr_set_ithresh(struct qm_portal *portal, u8 ithresh)
-+{
-+	qm_out(DQRR_ITR, ithresh);
-+}
-+
-+static inline u8 qm_dqrr_get_maxfill(struct qm_portal *portal)
-+{
-+	return (qm_in(CFG) & 0x00f00000) >> 20;
-+}
-+
-+
-+/* -------------- */
-+/* --- MR API --- */
-+
-+#define MR_CARRYCLEAR(p) \
-+	(void *)((unsigned long)(p) & (~(unsigned long)(QM_MR_SIZE << 6)))
-+
-+static inline u8 MR_PTR2IDX(const struct qm_mr_entry *e)
-+{
-+	return ((uintptr_t)e >> 6) & (QM_MR_SIZE - 1);
-+}
-+
-+static inline const struct qm_mr_entry *MR_INC(const struct qm_mr_entry *e)
-+{
-+	return MR_CARRYCLEAR(e + 1);
-+}
-+
-+static inline int qm_mr_init(struct qm_portal *portal, enum qm_mr_pmode pmode,
-+		enum qm_mr_cmode cmode)
-+{
-+	register struct qm_mr *mr = &portal->mr;
-+	u32 cfg;
-+
-+	mr->ring = portal->addr.addr_ce + QM_CL_MR;
-+	mr->pi = qm_in(MR_PI_CINH) & (QM_MR_SIZE - 1);
-+	mr->ci = qm_in(MR_CI_CINH) & (QM_MR_SIZE - 1);
-+	mr->cursor = mr->ring + mr->ci;
-+	mr->fill = qm_cyc_diff(QM_MR_SIZE, mr->ci, mr->pi);
-+	mr->vbit = (qm_in(MR_PI_CINH) & QM_MR_SIZE) ? QM_MR_VERB_VBIT : 0;
-+	mr->ithresh = qm_in(MR_ITR);
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	mr->pmode = pmode;
-+	mr->cmode = cmode;
-+#endif
-+	cfg = (qm_in(CFG) & 0xfffff0ff) |
-+		((cmode & 1) << 8);		/* QCSP_CFG:MM */
-+	qm_out(CFG, cfg);
-+	return 0;
-+}
-+
-+static inline void qm_mr_finish(struct qm_portal *portal)
-+{
-+	register struct qm_mr *mr = &portal->mr;
-+	if (mr->ci != MR_PTR2IDX(mr->cursor))
-+		pr_crit("Ignoring completed MR entries\n");
-+}
-+
-+static inline const struct qm_mr_entry *qm_mr_current(struct qm_portal *portal)
-+{
-+	register struct qm_mr *mr = &portal->mr;
-+	if (!mr->fill)
-+		return NULL;
-+	return mr->cursor;
-+}
-+
-+static inline u8 qm_mr_cursor(struct qm_portal *portal)
-+{
-+	register struct qm_mr *mr = &portal->mr;
-+	return MR_PTR2IDX(mr->cursor);
-+}
-+
-+static inline u8 qm_mr_next(struct qm_portal *portal)
-+{
-+	register struct qm_mr *mr = &portal->mr;
-+	DPA_ASSERT(mr->fill);
-+	mr->cursor = MR_INC(mr->cursor);
-+	return --mr->fill;
-+}
-+
-+static inline u8 qm_mr_pci_update(struct qm_portal *portal)
-+{
-+	register struct qm_mr *mr = &portal->mr;
-+	u8 diff, old_pi = mr->pi;
-+	DPA_ASSERT(mr->pmode == qm_mr_pci);
-+	mr->pi = qm_in(MR_PI_CINH);
-+	diff = qm_cyc_diff(QM_MR_SIZE, old_pi, mr->pi);
-+	mr->fill += diff;
-+	return diff;
-+}
-+
-+static inline void qm_mr_pce_prefetch(struct qm_portal *portal)
-+{
-+	__maybe_unused register struct qm_mr *mr = &portal->mr;
-+	DPA_ASSERT(mr->pmode == qm_mr_pce);
-+	qm_cl_invalidate(MR_PI);
-+	qm_cl_touch_ro(MR_PI);
-+}
-+
-+static inline u8 qm_mr_pce_update(struct qm_portal *portal)
-+{
-+	register struct qm_mr *mr = &portal->mr;
-+	u8 diff, old_pi = mr->pi;
-+	DPA_ASSERT(mr->pmode == qm_mr_pce);
-+	mr->pi = qm_cl_in(MR_PI) & (QM_MR_SIZE - 1);
-+	diff = qm_cyc_diff(QM_MR_SIZE, old_pi, mr->pi);
-+	mr->fill += diff;
-+	return diff;
-+}
-+
-+static inline void qm_mr_pvb_update(struct qm_portal *portal)
-+{
-+	register struct qm_mr *mr = &portal->mr;
-+	const struct qm_mr_entry *res = qm_cl(mr->ring, mr->pi);
-+	DPA_ASSERT(mr->pmode == qm_mr_pvb);
-+	/* when accessing 'verb', use __raw_readb() to ensure that compiler
-+	 * inlining doesn't try to optimise out "excess reads". */
-+	if ((__raw_readb(&res->verb) & QM_MR_VERB_VBIT) == mr->vbit) {
-+		mr->pi = (mr->pi + 1) & (QM_MR_SIZE - 1);
-+		if (!mr->pi)
-+			mr->vbit ^= QM_MR_VERB_VBIT;
-+		mr->fill++;
-+		res = MR_INC(res);
-+	}
-+	dcbit_ro(res);
-+}
-+
-+static inline void qm_mr_cci_consume(struct qm_portal *portal, u8 num)
-+{
-+	register struct qm_mr *mr = &portal->mr;
-+	DPA_ASSERT(mr->cmode == qm_mr_cci);
-+	mr->ci = (mr->ci + num) & (QM_MR_SIZE - 1);
-+	qm_out(MR_CI_CINH, mr->ci);
-+}
-+
-+static inline void qm_mr_cci_consume_to_current(struct qm_portal *portal)
-+{
-+	register struct qm_mr *mr = &portal->mr;
-+	DPA_ASSERT(mr->cmode == qm_mr_cci);
-+	mr->ci = MR_PTR2IDX(mr->cursor);
-+	qm_out(MR_CI_CINH, mr->ci);
-+}
-+
-+static inline void qm_mr_cce_prefetch(struct qm_portal *portal)
-+{
-+	__maybe_unused register struct qm_mr *mr = &portal->mr;
-+	DPA_ASSERT(mr->cmode == qm_mr_cce);
-+	qm_cl_invalidate(MR_CI);
-+	qm_cl_touch_rw(MR_CI);
-+}
-+
-+static inline void qm_mr_cce_consume(struct qm_portal *portal, u8 num)
-+{
-+	register struct qm_mr *mr = &portal->mr;
-+	DPA_ASSERT(mr->cmode == qm_mr_cce);
-+	mr->ci = (mr->ci + num) & (QM_MR_SIZE - 1);
-+	qm_cl_out(MR_CI, mr->ci);
-+}
-+
-+static inline void qm_mr_cce_consume_to_current(struct qm_portal *portal)
-+{
-+	register struct qm_mr *mr = &portal->mr;
-+	DPA_ASSERT(mr->cmode == qm_mr_cce);
-+	mr->ci = MR_PTR2IDX(mr->cursor);
-+	qm_cl_out(MR_CI, mr->ci);
-+}
-+
-+static inline u8 qm_mr_get_ci(struct qm_portal *portal)
-+{
-+	register struct qm_mr *mr = &portal->mr;
-+	return mr->ci;
-+}
-+
-+static inline u8 qm_mr_get_ithresh(struct qm_portal *portal)
-+{
-+	register struct qm_mr *mr = &portal->mr;
-+	return mr->ithresh;
-+}
-+
-+static inline void qm_mr_set_ithresh(struct qm_portal *portal, u8 ithresh)
-+{
-+	qm_out(MR_ITR, ithresh);
-+}
-+
-+
-+/* ------------------------------ */
-+/* --- Management command API --- */
-+
-+static inline int qm_mc_init(struct qm_portal *portal)
-+{
-+	register struct qm_mc *mc = &portal->mc;
-+	mc->cr = portal->addr.addr_ce + QM_CL_CR;
-+	mc->rr = portal->addr.addr_ce + QM_CL_RR0;
-+	mc->rridx = (__raw_readb(&mc->cr->__dont_write_directly__verb) &
-+			QM_MCC_VERB_VBIT) ?  0 : 1;
-+	mc->vbit = mc->rridx ? QM_MCC_VERB_VBIT : 0;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	mc->state = qman_mc_idle;
-+#endif
-+	return 0;
-+}
-+
-+static inline void qm_mc_finish(struct qm_portal *portal)
-+{
-+	__maybe_unused register struct qm_mc *mc = &portal->mc;
-+	DPA_ASSERT(mc->state == qman_mc_idle);
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	if (mc->state != qman_mc_idle)
-+		pr_crit("Losing incomplete MC command\n");
-+#endif
-+}
-+
-+static inline struct qm_mc_command *qm_mc_start(struct qm_portal *portal)
-+{
-+	register struct qm_mc *mc = &portal->mc;
-+	DPA_ASSERT(mc->state == qman_mc_idle);
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	mc->state = qman_mc_user;
-+#endif
-+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64)
-+	dcbz_64(mc->cr);
-+#endif
-+	return mc->cr;
-+}
-+
-+static inline void qm_mc_abort(struct qm_portal *portal)
-+{
-+	__maybe_unused register struct qm_mc *mc = &portal->mc;
-+	DPA_ASSERT(mc->state == qman_mc_user);
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	mc->state = qman_mc_idle;
-+#endif
-+}
-+
-+static inline void qm_mc_commit(struct qm_portal *portal, u8 myverb)
-+{
-+	register struct qm_mc *mc = &portal->mc;
-+	struct qm_mc_result *rr = mc->rr + mc->rridx;
-+	DPA_ASSERT(mc->state == qman_mc_user);
-+	lwsync();
-+	mc->cr->__dont_write_directly__verb = myverb | mc->vbit;
-+	dcbf(mc->cr);
-+	dcbit_ro(rr);
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	mc->state = qman_mc_hw;
-+#endif
-+}
-+
-+static inline struct qm_mc_result *qm_mc_result(struct qm_portal *portal)
-+{
-+	register struct qm_mc *mc = &portal->mc;
-+	struct qm_mc_result *rr = mc->rr + mc->rridx;
-+	DPA_ASSERT(mc->state == qman_mc_hw);
-+	/* The inactive response register's verb byte always returns zero until
-+	 * its command is submitted and completed. This includes the valid-bit,
-+	 * in case you were wondering... */
-+	if (!__raw_readb(&rr->verb)) {
-+		dcbit_ro(rr);
-+		return NULL;
-+	}
-+	mc->rridx ^= 1;
-+	mc->vbit ^= QM_MCC_VERB_VBIT;
-+#ifdef CONFIG_FSL_DPA_CHECKING
-+	mc->state = qman_mc_idle;
-+#endif
-+	return rr;
-+}
-+
-+
-+/* ------------------------------------- */
-+/* --- Portal interrupt register API --- */
-+
-+static inline int qm_isr_init(__always_unused struct qm_portal *portal)
-+{
-+	return 0;
-+}
-+
-+static inline void qm_isr_finish(__always_unused struct qm_portal *portal)
-+{
-+}
-+
-+static inline void qm_isr_set_iperiod(struct qm_portal *portal, u16 iperiod)
-+{
-+	qm_out(ITPR, iperiod);
-+}
-+
-+static inline u32 __qm_isr_read(struct qm_portal *portal, enum qm_isr_reg n)
-+{
-+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+	return __qm_in(&portal->addr, QM_REG_ISR + (n << 6));
-+#else
-+	return __qm_in(&portal->addr, QM_REG_ISR + (n << 2));
-+#endif
-+}
-+
-+static inline void __qm_isr_write(struct qm_portal *portal, enum qm_isr_reg n,
-+					u32 val)
-+{
-+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+	__qm_out(&portal->addr, QM_REG_ISR + (n << 6), val);
-+#else
-+	__qm_out(&portal->addr, QM_REG_ISR + (n << 2), val);
-+#endif
-+}
-+
-+/* Cleanup FQs */
-+static inline int qm_shutdown_fq(struct qm_portal **portal, int portal_count,
-+				 u32 fqid)
-+{
-+
-+	struct qm_mc_command *mcc;
-+	struct qm_mc_result *mcr;
-+	u8 state;
-+	int orl_empty, fq_empty, i, drain = 0;
-+	u32 result;
-+	u32 channel, wq;
-+	u16 dest_wq;
-+
-+	/* Determine the state of the FQID */
-+	mcc = qm_mc_start(portal[0]);
-+	mcc->queryfq_np.fqid = cpu_to_be32(fqid);
-+	qm_mc_commit(portal[0], QM_MCC_VERB_QUERYFQ_NP);
-+	while (!(mcr = qm_mc_result(portal[0])))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_MCR_VERB_QUERYFQ_NP);
-+	state = mcr->queryfq_np.state & QM_MCR_NP_STATE_MASK;
-+	if (state == QM_MCR_NP_STATE_OOS)
-+		return 0; /* Already OOS, no need to do anymore checks */
-+
-+	/* Query which channel the FQ is using */
-+	mcc = qm_mc_start(portal[0]);
-+	mcc->queryfq.fqid = cpu_to_be32(fqid);
-+	qm_mc_commit(portal[0], QM_MCC_VERB_QUERYFQ);
-+	while (!(mcr = qm_mc_result(portal[0])))
-+		cpu_relax();
-+	DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_MCR_VERB_QUERYFQ);
-+
-+	/* Need to store these since the MCR gets reused */
-+	dest_wq = be16_to_cpu(mcr->queryfq.fqd.dest_wq);
-+	wq = dest_wq & 0x7;
-+	channel = dest_wq>>3;
-+
-+	switch (state) {
-+	case QM_MCR_NP_STATE_TEN_SCHED:
-+	case QM_MCR_NP_STATE_TRU_SCHED:
-+	case QM_MCR_NP_STATE_ACTIVE:
-+	case QM_MCR_NP_STATE_PARKED:
-+		orl_empty = 0;
-+		mcc = qm_mc_start(portal[0]);
-+		mcc->alterfq.fqid = cpu_to_be32(fqid);
-+		qm_mc_commit(portal[0], QM_MCC_VERB_ALTER_RETIRE);
-+		while (!(mcr = qm_mc_result(portal[0])))
-+			cpu_relax();
-+		DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) ==
-+			   QM_MCR_VERB_ALTER_RETIRE);
-+		result = mcr->result; /* Make a copy as we reuse MCR below */
-+
-+		if (result == QM_MCR_RESULT_PENDING) {
-+			/* Need to wait for the FQRN in the message ring, which
-+			   will only occur once the FQ has been drained.  In
-+			   order for the FQ to drain the portal needs to be set
-+			   to dequeue from the channel the FQ is scheduled on */
-+			const struct qm_mr_entry *msg;
-+			const struct qm_dqrr_entry *dqrr = NULL;
-+			int found_fqrn = 0;
-+			u16 dequeue_wq = 0;
-+
-+			/* Flag that we need to drain FQ */
-+			drain = 1;
-+
-+			if (channel >= qm_channel_pool1 &&
-+			    channel < (qm_channel_pool1 + 15)) {
-+				/* Pool channel, enable the bit in the portal */
-+				dequeue_wq = (channel -
-+					      qm_channel_pool1 + 1)<<4 | wq;
-+			} else if (channel < qm_channel_pool1) {
-+				/* Dedicated channel */
-+				dequeue_wq = wq;
-+			} else {
-+				pr_info("Cannot recover FQ 0x%x, it is "
-+					"scheduled on channel 0x%x",
-+					fqid, channel);
-+				return -EBUSY;
-+			}
-+			/* Set the sdqcr to drain this channel */
-+			if (channel < qm_channel_pool1)
-+				for (i = 0; i < portal_count; i++)
-+					qm_dqrr_sdqcr_set(portal[i],
-+						  QM_SDQCR_TYPE_ACTIVE |
-+						  QM_SDQCR_CHANNELS_DEDICATED);
-+			else
-+				for (i = 0; i < portal_count; i++)
-+					qm_dqrr_sdqcr_set(
-+						portal[i],
-+						QM_SDQCR_TYPE_ACTIVE |
-+						QM_SDQCR_CHANNELS_POOL_CONV
-+						(channel));
-+			while (!found_fqrn) {
-+				/* Keep draining DQRR while checking the MR*/
-+				for (i = 0; i < portal_count; i++) {
-+					qm_dqrr_pvb_update(portal[i]);
-+					dqrr = qm_dqrr_current(portal[i]);
-+					while (dqrr) {
-+						qm_dqrr_cdc_consume_1ptr(
-+							portal[i], dqrr, 0);
-+						qm_dqrr_pvb_update(portal[i]);
-+						qm_dqrr_next(portal[i]);
-+						dqrr = qm_dqrr_current(
-+							portal[i]);
-+					}
-+					/* Process message ring too */
-+					qm_mr_pvb_update(portal[i]);
-+					msg = qm_mr_current(portal[i]);
-+					while (msg) {
-+						if ((msg->verb &
-+						     QM_MR_VERB_TYPE_MASK)
-+						    == QM_MR_VERB_FQRN)
-+							found_fqrn = 1;
-+						qm_mr_next(portal[i]);
-+						qm_mr_cci_consume_to_current(
-+							portal[i]);
-+						qm_mr_pvb_update(portal[i]);
-+						msg = qm_mr_current(portal[i]);
-+					}
-+					cpu_relax();
-+				}
-+			}
-+		}
-+		if (result != QM_MCR_RESULT_OK &&
-+		    result !=  QM_MCR_RESULT_PENDING) {
-+			/* error */
-+			pr_err("qman_retire_fq failed on FQ 0x%x, result=0x%x\n",
-+			       fqid, result);
-+			return -1;
-+		}
-+		if (!(mcr->alterfq.fqs & QM_MCR_FQS_ORLPRESENT)) {
-+			/* ORL had no entries, no need to wait until the
-+			   ERNs come in */
-+			orl_empty = 1;
-+		}
-+		/* Retirement succeeded, check to see if FQ needs
-+		   to be drained */
-+		if (drain || mcr->alterfq.fqs & QM_MCR_FQS_NOTEMPTY) {
-+			/* FQ is Not Empty, drain using volatile DQ commands */
-+			fq_empty = 0;
-+			do {
-+				const struct qm_dqrr_entry *dqrr = NULL;
-+				u32 vdqcr = fqid | QM_VDQCR_NUMFRAMES_SET(3);
-+				qm_dqrr_vdqcr_set(portal[0], vdqcr);
-+
-+				/* Wait for a dequeue to occur */
-+				while (dqrr == NULL) {
-+					qm_dqrr_pvb_update(portal[0]);
-+					dqrr = qm_dqrr_current(portal[0]);
-+					if (!dqrr)
-+						cpu_relax();
-+				}
-+				/* Process the dequeues, making sure to
-+				   empty the ring completely */
-+				while (dqrr) {
-+					if (be32_to_cpu(dqrr->fqid) == fqid &&
-+					    dqrr->stat & QM_DQRR_STAT_FQ_EMPTY)
-+						fq_empty = 1;
-+					qm_dqrr_cdc_consume_1ptr(portal[0],
-+								 dqrr, 0);
-+					qm_dqrr_pvb_update(portal[0]);
-+					qm_dqrr_next(portal[0]);
-+					dqrr = qm_dqrr_current(portal[0]);
-+				}
-+			} while (fq_empty == 0);
-+		}
-+		for (i = 0; i < portal_count; i++)
-+			qm_dqrr_sdqcr_set(portal[i], 0);
-+
-+		/* Wait for the ORL to have been completely drained */
-+		while (orl_empty == 0) {
-+			const struct qm_mr_entry *msg;
-+			qm_mr_pvb_update(portal[0]);
-+			msg = qm_mr_current(portal[0]);
-+			while (msg) {
-+				if ((msg->verb & QM_MR_VERB_TYPE_MASK) ==
-+				    QM_MR_VERB_FQRL)
-+					orl_empty = 1;
-+				qm_mr_next(portal[0]);
-+				qm_mr_cci_consume_to_current(portal[0]);
-+				qm_mr_pvb_update(portal[0]);
-+				msg = qm_mr_current(portal[0]);
-+			}
-+			cpu_relax();
-+		}
-+		mcc = qm_mc_start(portal[0]);
-+		mcc->alterfq.fqid = cpu_to_be32(fqid);
-+		qm_mc_commit(portal[0], QM_MCC_VERB_ALTER_OOS);
-+		while (!(mcr = qm_mc_result(portal[0])))
-+			cpu_relax();
-+		DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) ==
-+			   QM_MCR_VERB_ALTER_OOS);
-+		if (mcr->result != QM_MCR_RESULT_OK) {
-+			pr_err("OOS after drain Failed on FQID 0x%x, result 0x%x\n",
-+			       fqid, mcr->result);
-+			return -1;
-+		}
-+		return 0;
-+	case QM_MCR_NP_STATE_RETIRED:
-+		/* Send OOS Command */
-+		mcc = qm_mc_start(portal[0]);
-+		mcc->alterfq.fqid = cpu_to_be32(fqid);
-+		qm_mc_commit(portal[0], QM_MCC_VERB_ALTER_OOS);
-+		while (!(mcr = qm_mc_result(portal[0])))
-+			cpu_relax();
-+		DPA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) ==
-+			   QM_MCR_VERB_ALTER_OOS);
-+		if (mcr->result) {
-+			pr_err("OOS Failed on FQID 0x%x\n", fqid);
-+			return -1;
-+		}
-+		return 0;
-+	}
-+	return -1;
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/qman_private.h
-@@ -0,0 +1,398 @@
-+/* Copyright 2008-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "dpa_sys.h"
-+#include <linux/fsl_qman.h>
-+#include <linux/iommu.h>
-+
-+#if defined(CONFIG_FSL_PAMU)
-+#include <asm/fsl_pamu_stash.h>
-+#endif
-+
-+#if !defined(CONFIG_FSL_QMAN_FQ_LOOKUP) && defined(CONFIG_PPC64)
-+#error "_PPC64 requires _FSL_QMAN_FQ_LOOKUP"
-+#endif
-+
-+#define QBMAN_ANY_PORTAL_IDX 0xffffffff
-+	/* ----------------- */
-+	/* Congestion Groups */
-+	/* ----------------- */
-+/* This wrapper represents a bit-array for the state of the 256 Qman congestion
-+ * groups. Is also used as a *mask* for congestion groups, eg. so we ignore
-+ * those that don't concern us. We harness the structure and accessor details
-+ * already used in the management command to query congestion groups. */
-+struct qman_cgrs {
-+	struct __qm_mcr_querycongestion q;
-+};
-+static inline void qman_cgrs_init(struct qman_cgrs *c)
-+{
-+	memset(c, 0, sizeof(*c));
-+}
-+static inline void qman_cgrs_fill(struct qman_cgrs *c)
-+{
-+	memset(c, 0xff, sizeof(*c));
-+}
-+static inline int qman_cgrs_get(struct qman_cgrs *c, int num)
-+{
-+	return QM_MCR_QUERYCONGESTION(&c->q, num);
-+}
-+static inline void qman_cgrs_set(struct qman_cgrs *c, int num)
-+{
-+	c->q.__state[__CGR_WORD(num)] |= (0x80000000 >> __CGR_SHIFT(num));
-+}
-+static inline void qman_cgrs_unset(struct qman_cgrs *c, int num)
-+{
-+	c->q.__state[__CGR_WORD(num)] &= ~(0x80000000 >> __CGR_SHIFT(num));
-+}
-+static inline int qman_cgrs_next(struct qman_cgrs *c, int num)
-+{
-+	while ((++num < __CGR_NUM) && !qman_cgrs_get(c, num))
-+		;
-+	return num;
-+}
-+static inline void qman_cgrs_cp(struct qman_cgrs *dest,
-+				const struct qman_cgrs *src)
-+{
-+	*dest = *src;
-+}
-+static inline void qman_cgrs_and(struct qman_cgrs *dest,
-+			const struct qman_cgrs *a, const struct qman_cgrs *b)
-+{
-+	int ret;
-+	u32 *_d = dest->q.__state;
-+	const u32 *_a = a->q.__state;
-+	const u32 *_b = b->q.__state;
-+	for (ret = 0; ret < 8; ret++)
-+		*(_d++) = *(_a++) & *(_b++);
-+}
-+static inline void qman_cgrs_xor(struct qman_cgrs *dest,
-+			const struct qman_cgrs *a, const struct qman_cgrs *b)
-+{
-+	int ret;
-+	u32 *_d = dest->q.__state;
-+	const u32 *_a = a->q.__state;
-+	const u32 *_b = b->q.__state;
-+	for (ret = 0; ret < 8; ret++)
-+		*(_d++) = *(_a++) ^ *(_b++);
-+}
-+
-+	/* ----------------------- */
-+	/* CEETM Congestion Groups */
-+	/* ----------------------- */
-+/* This wrapper represents a bit-array for the state of the 512 Qman CEETM
-+ * congestion groups.
-+ */
-+struct qman_ccgrs {
-+	struct __qm_mcr_querycongestion q[2];
-+};
-+static inline void qman_ccgrs_init(struct qman_ccgrs *c)
-+{
-+	memset(c, 0, sizeof(*c));
-+}
-+static inline void qman_ccgrs_fill(struct qman_ccgrs *c)
-+{
-+	memset(c, 0xff, sizeof(*c));
-+}
-+static inline int qman_ccgrs_get(struct qman_ccgrs *c, int num)
-+{
-+	if (num < __CGR_NUM)
-+		return QM_MCR_QUERYCONGESTION(&c->q[0], num);
-+	else
-+		return QM_MCR_QUERYCONGESTION(&c->q[1], (num - __CGR_NUM));
-+}
-+static inline int qman_ccgrs_next(struct qman_ccgrs *c, int num)
-+{
-+	while ((++num < __CGR_NUM) && !qman_ccgrs_get(c, num))
-+		;
-+	return num;
-+}
-+static inline void qman_ccgrs_cp(struct qman_ccgrs *dest,
-+					const struct qman_ccgrs *src)
-+{
-+	*dest = *src;
-+}
-+static inline void qman_ccgrs_and(struct qman_ccgrs *dest,
-+			const struct qman_ccgrs *a, const struct qman_ccgrs *b)
-+{
-+	int ret, i;
-+	u32 *_d;
-+	const u32 *_a, *_b;
-+	for (i = 0; i < 2; i++) {
-+		_d = dest->q[i].__state;
-+		_a = a->q[i].__state;
-+		_b = b->q[i].__state;
-+		for (ret = 0; ret < 8; ret++)
-+			*(_d++) = *(_a++) & *(_b++);
-+	}
-+}
-+static inline void qman_ccgrs_xor(struct qman_ccgrs *dest,
-+			const struct qman_ccgrs *a, const struct qman_ccgrs *b)
-+{
-+	int ret, i;
-+	u32 *_d;
-+	const u32 *_a, *_b;
-+	for (i = 0; i < 2; i++) {
-+		_d = dest->q[i].__state;
-+		_a = a->q[i].__state;
-+		_b = b->q[i].__state;
-+		for (ret = 0; ret < 8; ret++)
-+			*(_d++) = *(_a++) ^ *(_b++);
-+	}
-+}
-+
-+/* used by CCSR and portal interrupt code */
-+enum qm_isr_reg {
-+	qm_isr_status = 0,
-+	qm_isr_enable = 1,
-+	qm_isr_disable = 2,
-+	qm_isr_inhibit = 3
-+};
-+
-+struct qm_portal_config {
-+	/* Corenet portal addresses;
-+	 * [0]==cache-enabled, [1]==cache-inhibited. */
-+	__iomem void *addr_virt[2];
-+	struct resource addr_phys[2];
-+	struct device dev;
-+	struct iommu_domain *iommu_domain;
-+	/* Allow these to be joined in lists */
-+	struct list_head list;
-+	/* User-visible portal configuration settings */
-+	struct qman_portal_config public_cfg;
-+	/* power management saved data */
-+	u32 saved_isdr;
-+};
-+
-+/* Revision info (for errata and feature handling) */
-+#define QMAN_REV11 0x0101
-+#define QMAN_REV12 0x0102
-+#define QMAN_REV20 0x0200
-+#define QMAN_REV30 0x0300
-+#define QMAN_REV31 0x0301
-+#define QMAN_REV32 0x0302
-+
-+/* QMan REV_2 register contains the Cfg option */
-+#define QMAN_REV_CFG_0 0x0
-+#define QMAN_REV_CFG_1 0x1
-+#define QMAN_REV_CFG_2 0x2
-+#define QMAN_REV_CFG_3 0x3
-+
-+extern u16 qman_ip_rev; /* 0 if uninitialised, otherwise QMAN_REVx */
-+extern u8 qman_ip_cfg;
-+extern u32 qman_clk;
-+extern u16 qman_portal_max;
-+
-+#ifdef CONFIG_FSL_QMAN_CONFIG
-+/* Hooks from qman_driver.c to qman_config.c */
-+int qman_init_ccsr(struct device_node *node);
-+void qman_liodn_fixup(u16 channel);
-+int qman_set_sdest(u16 channel, unsigned int cpu_idx);
-+size_t get_qman_fqd_size(void);
-+#else
-+static inline size_t get_qman_fqd_size(void)
-+{
-+	return (PAGE_SIZE << CONFIG_FSL_QMAN_FQD_SZ);
-+}
-+#endif
-+
-+int qm_set_wpm(int wpm);
-+int qm_get_wpm(int *wpm);
-+
-+/* Hooks from qman_driver.c in to qman_high.c */
-+struct qman_portal *qman_create_portal(
-+			struct qman_portal *portal,
-+			const struct qm_portal_config *config,
-+			const struct qman_cgrs *cgrs);
-+
-+struct qman_portal *qman_create_affine_portal(
-+			const struct qm_portal_config *config,
-+			const struct qman_cgrs *cgrs);
-+struct qman_portal *qman_create_affine_slave(struct qman_portal *redirect,
-+								int cpu);
-+const struct qm_portal_config *qman_destroy_affine_portal(void);
-+void qman_destroy_portal(struct qman_portal *qm);
-+
-+/* Hooks from fsl_usdpaa.c to qman_driver.c */
-+struct qm_portal_config *qm_get_unused_portal(void);
-+struct qm_portal_config *qm_get_unused_portal_idx(uint32_t idx);
-+
-+void qm_put_unused_portal(struct qm_portal_config *pcfg);
-+void qm_set_liodns(struct qm_portal_config *pcfg);
-+
-+/* This CGR feature is supported by h/w and required by unit-tests and the
-+ * debugfs hooks, so is implemented in the driver. However it allows an explicit
-+ * corruption of h/w fields by s/w that are usually incorruptible (because the
-+ * counters are usually maintained entirely within h/w). As such, we declare
-+ * this API internally. */
-+int qman_testwrite_cgr(struct qman_cgr *cgr, u64 i_bcnt,
-+	struct qm_mcr_cgrtestwrite *result);
-+
-+#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
-+/* If the fq object pointer is greater than the size of context_b field,
-+ * than a lookup table is required. */
-+int qman_setup_fq_lookup_table(size_t num_entries);
-+#endif
-+
-+
-+/*************************************************/
-+/*   QMan s/w corenet portal, low-level i/face   */
-+/*************************************************/
-+
-+/* Note: most functions are only used by the high-level interface, so are
-+ * inlined from qman_low.h. The stuff below is for use by other parts of the
-+ * driver. */
-+
-+/* For qm_dqrr_sdqcr_set(); Choose one SOURCE. Choose one COUNT. Choose one
-+ * dequeue TYPE. Choose TOKEN (8-bit).
-+ * If SOURCE == CHANNELS,
-+ *   Choose CHANNELS_DEDICATED and/or CHANNELS_POOL(n).
-+ *   You can choose DEDICATED_PRECEDENCE if the portal channel should have
-+ *   priority.
-+ * If SOURCE == SPECIFICWQ,
-+ *     Either select the work-queue ID with SPECIFICWQ_WQ(), or select the
-+ *     channel (SPECIFICWQ_DEDICATED or SPECIFICWQ_POOL()) and specify the
-+ *     work-queue priority (0-7) with SPECIFICWQ_WQ() - either way, you get the
-+ *     same value.
-+ */
-+#define QM_SDQCR_SOURCE_CHANNELS	0x0
-+#define QM_SDQCR_SOURCE_SPECIFICWQ	0x40000000
-+#define QM_SDQCR_COUNT_EXACT1		0x0
-+#define QM_SDQCR_COUNT_UPTO3		0x20000000
-+#define QM_SDQCR_DEDICATED_PRECEDENCE	0x10000000
-+#define QM_SDQCR_TYPE_MASK		0x03000000
-+#define QM_SDQCR_TYPE_NULL		0x0
-+#define QM_SDQCR_TYPE_PRIO_QOS		0x01000000
-+#define QM_SDQCR_TYPE_ACTIVE_QOS	0x02000000
-+#define QM_SDQCR_TYPE_ACTIVE		0x03000000
-+#define QM_SDQCR_TOKEN_MASK		0x00ff0000
-+#define QM_SDQCR_TOKEN_SET(v)		(((v) & 0xff) << 16)
-+#define QM_SDQCR_TOKEN_GET(v)		(((v) >> 16) & 0xff)
-+#define QM_SDQCR_CHANNELS_DEDICATED	0x00008000
-+#define QM_SDQCR_SPECIFICWQ_MASK	0x000000f7
-+#define QM_SDQCR_SPECIFICWQ_DEDICATED	0x00000000
-+#define QM_SDQCR_SPECIFICWQ_POOL(n)	((n) << 4)
-+#define QM_SDQCR_SPECIFICWQ_WQ(n)	(n)
-+
-+/* For qm_dqrr_vdqcr_set(): use FQID(n) to fill in the frame queue ID */
-+#define QM_VDQCR_FQID_MASK		0x00ffffff
-+#define QM_VDQCR_FQID(n)		((n) & QM_VDQCR_FQID_MASK)
-+
-+/* For qm_dqrr_pdqcr_set(); Choose one MODE. Choose one COUNT.
-+ * If MODE==SCHEDULED
-+ *   Choose SCHEDULED_CHANNELS or SCHEDULED_SPECIFICWQ. Choose one dequeue TYPE.
-+ *   If CHANNELS,
-+ *     Choose CHANNELS_DEDICATED and/or CHANNELS_POOL() channels.
-+ *     You can choose DEDICATED_PRECEDENCE if the portal channel should have
-+ *     priority.
-+ *   If SPECIFICWQ,
-+ *     Either select the work-queue ID with SPECIFICWQ_WQ(), or select the
-+ *     channel (SPECIFICWQ_DEDICATED or SPECIFICWQ_POOL()) and specify the
-+ *     work-queue priority (0-7) with SPECIFICWQ_WQ() - either way, you get the
-+ *     same value.
-+ * If MODE==UNSCHEDULED
-+ *     Choose FQID().
-+ */
-+#define QM_PDQCR_MODE_SCHEDULED		0x0
-+#define QM_PDQCR_MODE_UNSCHEDULED	0x80000000
-+#define QM_PDQCR_SCHEDULED_CHANNELS	0x0
-+#define QM_PDQCR_SCHEDULED_SPECIFICWQ	0x40000000
-+#define QM_PDQCR_COUNT_EXACT1		0x0
-+#define QM_PDQCR_COUNT_UPTO3		0x20000000
-+#define QM_PDQCR_DEDICATED_PRECEDENCE	0x10000000
-+#define QM_PDQCR_TYPE_MASK		0x03000000
-+#define QM_PDQCR_TYPE_NULL		0x0
-+#define QM_PDQCR_TYPE_PRIO_QOS		0x01000000
-+#define QM_PDQCR_TYPE_ACTIVE_QOS	0x02000000
-+#define QM_PDQCR_TYPE_ACTIVE		0x03000000
-+#define QM_PDQCR_CHANNELS_DEDICATED	0x00008000
-+#define QM_PDQCR_CHANNELS_POOL(n)	(0x00008000 >> (n))
-+#define QM_PDQCR_SPECIFICWQ_MASK	0x000000f7
-+#define QM_PDQCR_SPECIFICWQ_DEDICATED	0x00000000
-+#define QM_PDQCR_SPECIFICWQ_POOL(n)	((n) << 4)
-+#define QM_PDQCR_SPECIFICWQ_WQ(n)	(n)
-+#define QM_PDQCR_FQID(n)		((n) & 0xffffff)
-+
-+/* Used by all portal interrupt registers except 'inhibit'
-+ * Channels with frame availability
-+ */
-+#define QM_PIRQ_DQAVAIL	0x0000ffff
-+
-+/* The DQAVAIL interrupt fields break down into these bits; */
-+#define QM_DQAVAIL_PORTAL	0x8000		/* Portal channel */
-+#define QM_DQAVAIL_POOL(n)	(0x8000 >> (n))	/* Pool channel, n==[1..15] */
-+#define QM_DQAVAIL_MASK		0xffff
-+/* This mask contains all the "irqsource" bits visible to API users */
-+#define QM_PIRQ_VISIBLE	(QM_PIRQ_SLOW | QM_PIRQ_DQRI)
-+
-+/* These are qm_<reg>_<verb>(). So for example, qm_disable_write() means "write
-+ * the disable register" rather than "disable the ability to write". */
-+#define qm_isr_status_read(qm)		__qm_isr_read(qm, qm_isr_status)
-+#define qm_isr_status_clear(qm, m)	__qm_isr_write(qm, qm_isr_status, m)
-+#define qm_isr_enable_read(qm)		__qm_isr_read(qm, qm_isr_enable)
-+#define qm_isr_enable_write(qm, v)	__qm_isr_write(qm, qm_isr_enable, v)
-+#define qm_isr_disable_read(qm)		__qm_isr_read(qm, qm_isr_disable)
-+#define qm_isr_disable_write(qm, v)	__qm_isr_write(qm, qm_isr_disable, v)
-+/* TODO: unfortunate name-clash here, reword? */
-+#define qm_isr_inhibit(qm)		__qm_isr_write(qm, qm_isr_inhibit, 1)
-+#define qm_isr_uninhibit(qm)		__qm_isr_write(qm, qm_isr_inhibit, 0)
-+
-+#ifdef CONFIG_FSL_QMAN_CONFIG
-+int qman_have_ccsr(void);
-+#else
-+#define qman_have_ccsr	0
-+#endif
-+
-+__init int qman_init(void);
-+__init int qman_resource_init(void);
-+
-+/* CEETM related */
-+#define QMAN_CEETM_MAX	2
-+extern u8 num_ceetms;
-+extern struct qm_ceetm qman_ceetms[QMAN_CEETM_MAX];
-+int qman_sp_enable_ceetm_mode(enum qm_dc_portal portal, u16 sub_portal);
-+int qman_sp_disable_ceetm_mode(enum qm_dc_portal portal, u16 sub_portal);
-+int qman_ceetm_set_prescaler(enum qm_dc_portal portal);
-+int qman_ceetm_get_prescaler(u16 *pres);
-+int qman_ceetm_query_cq(unsigned int cqid, unsigned int dcpid,
-+			struct qm_mcr_ceetm_cq_query *cq_query);
-+int qman_ceetm_query_ccgr(struct qm_mcc_ceetm_ccgr_query *ccgr_query,
-+				struct qm_mcr_ceetm_ccgr_query *response);
-+int qman_ceetm_get_xsfdr(enum qm_dc_portal portal, unsigned int *num);
-+
-+extern void *affine_portals[NR_CPUS];
-+const struct qm_portal_config *qman_get_qm_portal_config(
-+						struct qman_portal *portal);
-+
-+/* power management */
-+#ifdef CONFIG_SUSPEND
-+void suspend_unused_qportal(void);
-+void resume_unused_qportal(void);
-+#endif
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/qman_test.c
-@@ -0,0 +1,57 @@
-+/* Copyright 2008-2011 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "qman_test.h"
-+
-+MODULE_AUTHOR("Geoff Thorpe");
-+MODULE_LICENSE("Dual BSD/GPL");
-+MODULE_DESCRIPTION("Qman testing");
-+
-+static int test_init(void)
-+{
-+	int loop = 1;
-+	while (loop--) {
-+#ifdef CONFIG_FSL_QMAN_TEST_STASH_POTATO
-+		qman_test_hotpotato();
-+#endif
-+#ifdef CONFIG_FSL_QMAN_TEST_HIGH
-+		qman_test_high();
-+#endif
-+	}
-+	return 0;
-+}
-+
-+static void test_exit(void)
-+{
-+}
-+
-+module_init(test_init);
-+module_exit(test_exit);
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/qman_test.h
-@@ -0,0 +1,45 @@
-+/* Copyright 2008-2011 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/io.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/sched.h>
-+
-+#include <linux/fsl_qman.h>
-+
-+void qman_test_hotpotato(void);
-+void qman_test_high(void);
-+
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/qman_test_high.c
-@@ -0,0 +1,216 @@
-+/* Copyright 2008-2011 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "qman_test.h"
-+
-+/*************/
-+/* constants */
-+/*************/
-+
-+#define CGR_ID		27
-+#define POOL_ID		2
-+#define FQ_FLAGS	QMAN_FQ_FLAG_DYNAMIC_FQID
-+#define NUM_ENQUEUES	10
-+#define NUM_PARTIAL	4
-+#define PORTAL_SDQCR	(QM_SDQCR_SOURCE_CHANNELS | \
-+			QM_SDQCR_TYPE_PRIO_QOS | \
-+			QM_SDQCR_TOKEN_SET(0x98) | \
-+			QM_SDQCR_CHANNELS_DEDICATED | \
-+			QM_SDQCR_CHANNELS_POOL(POOL_ID))
-+#define PORTAL_OPAQUE	((void *)0xf00dbeef)
-+#define VDQCR_FLAGS	(QMAN_VOLATILE_FLAG_WAIT | QMAN_VOLATILE_FLAG_FINISH)
-+
-+/*************************************/
-+/* Predeclarations (eg. for fq_base) */
-+/*************************************/
-+
-+static enum qman_cb_dqrr_result cb_dqrr(struct qman_portal *,
-+					struct qman_fq *,
-+					const struct qm_dqrr_entry *);
-+static void cb_ern(struct qman_portal *, struct qman_fq *,
-+			const struct qm_mr_entry *);
-+static void cb_fqs(struct qman_portal *, struct qman_fq *,
-+			const struct qm_mr_entry *);
-+
-+/***************/
-+/* global vars */
-+/***************/
-+
-+static struct qm_fd fd, fd_dq;
-+static struct qman_fq fq_base = {
-+	.cb.dqrr = cb_dqrr,
-+	.cb.ern = cb_ern,
-+	.cb.fqs = cb_fqs
-+};
-+static DECLARE_WAIT_QUEUE_HEAD(waitqueue);
-+static int retire_complete, sdqcr_complete;
-+
-+/**********************/
-+/* internal functions */
-+/**********************/
-+
-+/* Helpers for initialising and "incrementing" a frame descriptor */
-+static void fd_init(struct qm_fd *__fd)
-+{
-+	qm_fd_addr_set64(__fd, 0xabdeadbeefLLU);
-+	__fd->format = qm_fd_contig_big;
-+	__fd->length29 = 0x0000ffff;
-+	__fd->cmd = 0xfeedf00d;
-+}
-+
-+static void fd_inc(struct qm_fd *__fd)
-+{
-+	u64 t = qm_fd_addr_get64(__fd);
-+	int z = t >> 40;
-+	t <<= 1;
-+	if (z)
-+		t |= 1;
-+	qm_fd_addr_set64(__fd, t);
-+	__fd->length29--;
-+	__fd->cmd++;
-+}
-+
-+/* The only part of the 'fd' we can't memcmp() is the ppid */
-+static int fd_cmp(const struct qm_fd *a, const struct qm_fd *b)
-+{
-+	int r = (qm_fd_addr_get64(a) == qm_fd_addr_get64(b)) ? 0 : -1;
-+	if (!r)
-+		r = a->format - b->format;
-+	if (!r)
-+		r = a->opaque - b->opaque;
-+	if (!r)
-+		r = a->cmd - b->cmd;
-+	return r;
-+}
-+
-+/********/
-+/* test */
-+/********/
-+
-+static void do_enqueues(struct qman_fq *fq)
-+{
-+	unsigned int loop;
-+	for (loop = 0; loop < NUM_ENQUEUES; loop++) {
-+		if (qman_enqueue(fq, &fd, QMAN_ENQUEUE_FLAG_WAIT |
-+				(((loop + 1) == NUM_ENQUEUES) ?
-+				QMAN_ENQUEUE_FLAG_WAIT_SYNC : 0)))
-+			panic("qman_enqueue() failed\n");
-+		fd_inc(&fd);
-+	}
-+}
-+
-+void qman_test_high(void)
-+{
-+	unsigned int flags;
-+	int res;
-+	struct qman_fq *fq = &fq_base;
-+
-+	pr_info("qman_test_high starting\n");
-+	fd_init(&fd);
-+	fd_init(&fd_dq);
-+
-+	/* Initialise (parked) FQ */
-+	if (qman_create_fq(0, FQ_FLAGS, fq))
-+		panic("qman_create_fq() failed\n");
-+	if (qman_init_fq(fq, QMAN_INITFQ_FLAG_LOCAL, NULL))
-+		panic("qman_init_fq() failed\n");
-+
-+	/* Do enqueues + VDQCR, twice. (Parked FQ) */
-+	do_enqueues(fq);
-+	pr_info("VDQCR (till-empty);\n");
-+	if (qman_volatile_dequeue(fq, VDQCR_FLAGS,
-+			QM_VDQCR_NUMFRAMES_TILLEMPTY))
-+		panic("qman_volatile_dequeue() failed\n");
-+	do_enqueues(fq);
-+	pr_info("VDQCR (%d of %d);\n", NUM_PARTIAL, NUM_ENQUEUES);
-+	if (qman_volatile_dequeue(fq, VDQCR_FLAGS,
-+			QM_VDQCR_NUMFRAMES_SET(NUM_PARTIAL)))
-+		panic("qman_volatile_dequeue() failed\n");
-+	pr_info("VDQCR (%d of %d);\n", NUM_ENQUEUES - NUM_PARTIAL,
-+					NUM_ENQUEUES);
-+	if (qman_volatile_dequeue(fq, VDQCR_FLAGS,
-+			QM_VDQCR_NUMFRAMES_SET(NUM_ENQUEUES - NUM_PARTIAL)))
-+		panic("qman_volatile_dequeue() failed\n");
-+
-+	do_enqueues(fq);
-+	pr_info("scheduled dequeue (till-empty)\n");
-+	if (qman_schedule_fq(fq))
-+		panic("qman_schedule_fq() failed\n");
-+	wait_event(waitqueue, sdqcr_complete);
-+
-+	/* Retire and OOS the FQ */
-+	res = qman_retire_fq(fq, &flags);
-+	if (res < 0)
-+		panic("qman_retire_fq() failed\n");
-+	wait_event(waitqueue, retire_complete);
-+	if (flags & QMAN_FQ_STATE_BLOCKOOS)
-+		panic("leaking frames\n");
-+	if (qman_oos_fq(fq))
-+		panic("qman_oos_fq() failed\n");
-+	qman_destroy_fq(fq, 0);
-+	pr_info("qman_test_high finished\n");
-+}
-+
-+static enum qman_cb_dqrr_result cb_dqrr(struct qman_portal *p,
-+					struct qman_fq *fq,
-+					const struct qm_dqrr_entry *dq)
-+{
-+	if (fd_cmp(&fd_dq, &dq->fd)) {
-+		pr_err("BADNESS: dequeued frame doesn't match;\n");
-+		pr_err("Expected 0x%llx, got 0x%llx\n",
-+		       (unsigned long long)fd_dq.length29,
-+		       (unsigned long long)dq->fd.length29);
-+		BUG();
-+	}
-+	fd_inc(&fd_dq);
-+	if (!(dq->stat & QM_DQRR_STAT_UNSCHEDULED) && !fd_cmp(&fd_dq, &fd)) {
-+		sdqcr_complete = 1;
-+		wake_up(&waitqueue);
-+	}
-+	return qman_cb_dqrr_consume;
-+}
-+
-+static void cb_ern(struct qman_portal *p, struct qman_fq *fq,
-+			const struct qm_mr_entry *msg)
-+{
-+	panic("cb_ern() unimplemented");
-+}
-+
-+static void cb_fqs(struct qman_portal *p, struct qman_fq *fq,
-+			const struct qm_mr_entry *msg)
-+{
-+	u8 verb = (msg->verb & QM_MR_VERB_TYPE_MASK);
-+	if ((verb != QM_MR_VERB_FQRN) && (verb != QM_MR_VERB_FQRNI))
-+		panic("unexpected FQS message");
-+	pr_info("Retirement message received\n");
-+	retire_complete = 1;
-+	wake_up(&waitqueue);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/qman_test_hotpotato.c
-@@ -0,0 +1,502 @@
-+/* Copyright 2009-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/kthread.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include "qman_test.h"
-+
-+/* Algorithm:
-+ *
-+ * Each cpu will have HP_PER_CPU "handlers" set up, each of which incorporates
-+ * an rx/tx pair of FQ objects (both of which are stashed on dequeue). The
-+ * organisation of FQIDs is such that the HP_PER_CPU*NUM_CPUS handlers will
-+ * shuttle a "hot potato" frame around them such that every forwarding action
-+ * moves it from one cpu to another. (The use of more than one handler per cpu
-+ * is to allow enough handlers/FQs to truly test the significance of caching -
-+ * ie. when cache-expiries are occurring.)
-+ *
-+ * The "hot potato" frame content will be HP_NUM_WORDS*4 bytes in size, and the
-+ * first and last words of the frame data will undergo a transformation step on
-+ * each forwarding action. To achieve this, each handler will be assigned a
-+ * 32-bit "mixer", that is produced using a 32-bit LFSR. When a frame is
-+ * received by a handler, the mixer of the expected sender is XOR'd into all
-+ * words of the entire frame, which is then validated against the original
-+ * values. Then, before forwarding, the entire frame is XOR'd with the mixer of
-+ * the current handler. Apart from validating that the frame is taking the
-+ * expected path, this also provides some quasi-realistic overheads to each
-+ * forwarding action - dereferencing *all* the frame data, computation, and
-+ * conditional branching. There is a "special" handler designated to act as the
-+ * instigator of the test by creating an enqueuing the "hot potato" frame, and
-+ * to determine when the test has completed by counting HP_LOOPS iterations.
-+ *
-+ * Init phases:
-+ *
-+ * 1. prepare each cpu's 'hp_cpu' struct using on_each_cpu(,,1) and link them
-+ *    into 'hp_cpu_list'. Specifically, set processor_id, allocate HP_PER_CPU
-+ *    handlers and link-list them (but do no other handler setup).
-+ *
-+ * 2. scan over 'hp_cpu_list' HP_PER_CPU times, the first time sets each
-+ *    hp_cpu's 'iterator' to point to its first handler. With each loop,
-+ *    allocate rx/tx FQIDs and mixer values to the hp_cpu's iterator handler
-+ *    and advance the iterator for the next loop. This includes a final fixup,
-+ *    which connects the last handler to the first (and which is why phase 2
-+ *    and 3 are separate).
-+ *
-+ * 3. scan over 'hp_cpu_list' HP_PER_CPU times, the first time sets each
-+ *    hp_cpu's 'iterator' to point to its first handler. With each loop,
-+ *    initialise FQ objects and advance the iterator for the next loop.
-+ *    Moreover, do this initialisation on the cpu it applies to so that Rx FQ
-+ *    initialisation targets the correct cpu.
-+ */
-+
-+/* helper to run something on all cpus (can't use on_each_cpu(), as that invokes
-+ * the fn from irq context, which is too restrictive). */
-+struct bstrap {
-+	void (*fn)(void);
-+	atomic_t started;
-+};
-+static int bstrap_fn(void *__bstrap)
-+{
-+	struct bstrap *bstrap = __bstrap;
-+	atomic_inc(&bstrap->started);
-+	bstrap->fn();
-+	while (!kthread_should_stop())
-+		msleep(1);
-+	return 0;
-+}
-+static int on_all_cpus(void (*fn)(void))
-+{
-+	int cpu;
-+	for_each_cpu(cpu, cpu_online_mask) {
-+		struct bstrap bstrap = {
-+			.fn = fn,
-+			.started = ATOMIC_INIT(0)
-+		};
-+		struct task_struct *k = kthread_create(bstrap_fn, &bstrap,
-+			"hotpotato%d", cpu);
-+		int ret;
-+		if (IS_ERR(k))
-+			return -ENOMEM;
-+		kthread_bind(k, cpu);
-+		wake_up_process(k);
-+		/* If we call kthread_stop() before the "wake up" has had an
-+		 * effect, then the thread may exit with -EINTR without ever
-+		 * running the function. So poll until it's started before
-+		 * requesting it to stop. */
-+		while (!atomic_read(&bstrap.started))
-+			msleep(10);
-+		ret = kthread_stop(k);
-+		if (ret)
-+			return ret;
-+	}
-+	return 0;
-+}
-+
-+struct hp_handler {
-+
-+	/* The following data is stashed when 'rx' is dequeued; */
-+	/* -------------- */
-+	/* The Rx FQ, dequeues of which will stash the entire hp_handler */
-+	struct qman_fq rx;
-+	/* The Tx FQ we should forward to */
-+	struct qman_fq tx;
-+	/* The value we XOR post-dequeue, prior to validating */
-+	u32 rx_mixer;
-+	/* The value we XOR pre-enqueue, after validating */
-+	u32 tx_mixer;
-+	/* what the hotpotato address should be on dequeue */
-+	dma_addr_t addr;
-+	u32 *frame_ptr;
-+
-+	/* The following data isn't (necessarily) stashed on dequeue; */
-+	/* -------------- */
-+	u32 fqid_rx, fqid_tx;
-+	/* list node for linking us into 'hp_cpu' */
-+	struct list_head node;
-+	/* Just to check ... */
-+	unsigned int processor_id;
-+} ____cacheline_aligned;
-+
-+struct hp_cpu {
-+	/* identify the cpu we run on; */
-+	unsigned int processor_id;
-+	/* root node for the per-cpu list of handlers */
-+	struct list_head handlers;
-+	/* list node for linking us into 'hp_cpu_list' */
-+	struct list_head node;
-+	/* when repeatedly scanning 'hp_list', each time linking the n'th
-+	 * handlers together, this is used as per-cpu iterator state */
-+	struct hp_handler *iterator;
-+};
-+
-+/* Each cpu has one of these */
-+static DEFINE_PER_CPU(struct hp_cpu, hp_cpus);
-+
-+/* links together the hp_cpu structs, in first-come first-serve order. */
-+static LIST_HEAD(hp_cpu_list);
-+static spinlock_t hp_lock = __SPIN_LOCK_UNLOCKED(hp_lock);
-+
-+static unsigned int hp_cpu_list_length;
-+
-+/* the "special" handler, that starts and terminates the test. */
-+static struct hp_handler *special_handler;
-+static int loop_counter;
-+
-+/* handlers are allocated out of this, so they're properly aligned. */
-+static struct kmem_cache *hp_handler_slab;
-+
-+/* this is the frame data */
-+static void *__frame_ptr;
-+static u32 *frame_ptr;
-+static dma_addr_t frame_dma;
-+
-+/* the main function waits on this */
-+static DECLARE_WAIT_QUEUE_HEAD(queue);
-+
-+#define HP_PER_CPU	2
-+#define HP_LOOPS	8
-+/* 80 bytes, like a small ethernet frame, and bleeds into a second cacheline */
-+#define HP_NUM_WORDS	80
-+/* First word of the LFSR-based frame data */
-+#define HP_FIRST_WORD	0xabbaf00d
-+
-+static inline u32 do_lfsr(u32 prev)
-+{
-+	return (prev >> 1) ^ (-(prev & 1u) & 0xd0000001u);
-+}
-+
-+static void allocate_frame_data(void)
-+{
-+	u32 lfsr = HP_FIRST_WORD;
-+	int loop;
-+	struct platform_device *pdev = platform_device_alloc("foobar", -1);
-+	if (!pdev)
-+		panic("platform_device_alloc() failed");
-+	if (platform_device_add(pdev))
-+		panic("platform_device_add() failed");
-+	__frame_ptr = kmalloc(4 * HP_NUM_WORDS, GFP_KERNEL);
-+	if (!__frame_ptr)
-+		panic("kmalloc() failed");
-+	frame_ptr = (void *)(((unsigned long)__frame_ptr + 63) &
-+				~(unsigned long)63);
-+	for (loop = 0; loop < HP_NUM_WORDS; loop++) {
-+		frame_ptr[loop] = lfsr;
-+		lfsr = do_lfsr(lfsr);
-+	}
-+	frame_dma = dma_map_single(&pdev->dev, frame_ptr, 4 * HP_NUM_WORDS,
-+					DMA_BIDIRECTIONAL);
-+	platform_device_del(pdev);
-+	platform_device_put(pdev);
-+}
-+
-+static void deallocate_frame_data(void)
-+{
-+	kfree(__frame_ptr);
-+}
-+
-+static inline void process_frame_data(struct hp_handler *handler,
-+				const struct qm_fd *fd)
-+{
-+	u32 *p = handler->frame_ptr;
-+	u32 lfsr = HP_FIRST_WORD;
-+	int loop;
-+	if (qm_fd_addr_get64(fd) != (handler->addr & 0xffffffffff)) {
-+		pr_err("Got 0x%llx expected 0x%llx\n",
-+		       qm_fd_addr_get64(fd), handler->addr);
-+		panic("bad frame address");
-+	}
-+	for (loop = 0; loop < HP_NUM_WORDS; loop++, p++) {
-+		*p ^= handler->rx_mixer;
-+		if (*p != lfsr)
-+			panic("corrupt frame data");
-+		*p ^= handler->tx_mixer;
-+		lfsr = do_lfsr(lfsr);
-+	}
-+}
-+
-+static enum qman_cb_dqrr_result normal_dqrr(struct qman_portal *portal,
-+					struct qman_fq *fq,
-+					const struct qm_dqrr_entry *dqrr)
-+{
-+	struct hp_handler *handler = (struct hp_handler *)fq;
-+
-+	process_frame_data(handler, &dqrr->fd);
-+	if (qman_enqueue(&handler->tx, &dqrr->fd, 0))
-+		panic("qman_enqueue() failed");
-+	return qman_cb_dqrr_consume;
-+}
-+
-+static enum qman_cb_dqrr_result special_dqrr(struct qman_portal *portal,
-+					struct qman_fq *fq,
-+					const struct qm_dqrr_entry *dqrr)
-+{
-+	struct hp_handler *handler = (struct hp_handler *)fq;
-+
-+	process_frame_data(handler, &dqrr->fd);
-+	if (++loop_counter < HP_LOOPS) {
-+		if (qman_enqueue(&handler->tx, &dqrr->fd, 0))
-+			panic("qman_enqueue() failed");
-+	} else {
-+		pr_info("Received final (%dth) frame\n", loop_counter);
-+		wake_up(&queue);
-+	}
-+	return qman_cb_dqrr_consume;
-+}
-+
-+static void create_per_cpu_handlers(void)
-+{
-+	struct hp_handler *handler;
-+	int loop;
-+	struct hp_cpu *hp_cpu = &get_cpu_var(hp_cpus);
-+
-+	hp_cpu->processor_id = smp_processor_id();
-+	spin_lock(&hp_lock);
-+	list_add_tail(&hp_cpu->node, &hp_cpu_list);
-+	hp_cpu_list_length++;
-+	spin_unlock(&hp_lock);
-+	INIT_LIST_HEAD(&hp_cpu->handlers);
-+	for (loop = 0; loop < HP_PER_CPU; loop++) {
-+		handler = kmem_cache_alloc(hp_handler_slab, GFP_KERNEL);
-+		if (!handler)
-+			panic("kmem_cache_alloc() failed");
-+		handler->processor_id = hp_cpu->processor_id;
-+		handler->addr = frame_dma;
-+		handler->frame_ptr = frame_ptr;
-+		list_add_tail(&handler->node, &hp_cpu->handlers);
-+	}
-+	put_cpu_var(hp_cpus);
-+}
-+
-+static void destroy_per_cpu_handlers(void)
-+{
-+	struct list_head *loop, *tmp;
-+	struct hp_cpu *hp_cpu = &get_cpu_var(hp_cpus);
-+
-+	spin_lock(&hp_lock);
-+	list_del(&hp_cpu->node);
-+	spin_unlock(&hp_lock);
-+	list_for_each_safe(loop, tmp, &hp_cpu->handlers) {
-+		u32 flags;
-+		struct hp_handler *handler = list_entry(loop, struct hp_handler,
-+							node);
-+		if (qman_retire_fq(&handler->rx, &flags))
-+			panic("qman_retire_fq(rx) failed");
-+		BUG_ON(flags & QMAN_FQ_STATE_BLOCKOOS);
-+		if (qman_oos_fq(&handler->rx))
-+			panic("qman_oos_fq(rx) failed");
-+		qman_destroy_fq(&handler->rx, 0);
-+		qman_destroy_fq(&handler->tx, 0);
-+		qman_release_fqid(handler->fqid_rx);
-+		list_del(&handler->node);
-+		kmem_cache_free(hp_handler_slab, handler);
-+	}
-+	put_cpu_var(hp_cpus);
-+}
-+
-+static inline u8 num_cachelines(u32 offset)
-+{
-+	u8 res = (offset + (L1_CACHE_BYTES - 1))
-+			 / (L1_CACHE_BYTES);
-+	if (res > 3)
-+		return 3;
-+	return res;
-+}
-+#define STASH_DATA_CL \
-+	num_cachelines(HP_NUM_WORDS * 4)
-+#define STASH_CTX_CL \
-+	num_cachelines(offsetof(struct hp_handler, fqid_rx))
-+
-+static void init_handler(void *__handler)
-+{
-+	struct qm_mcc_initfq opts;
-+	struct hp_handler *handler = __handler;
-+	BUG_ON(handler->processor_id != smp_processor_id());
-+	/* Set up rx */
-+	memset(&handler->rx, 0, sizeof(handler->rx));
-+	if (handler == special_handler)
-+		handler->rx.cb.dqrr = special_dqrr;
-+	else
-+		handler->rx.cb.dqrr = normal_dqrr;
-+	if (qman_create_fq(handler->fqid_rx, 0, &handler->rx))
-+		panic("qman_create_fq(rx) failed");
-+	memset(&opts, 0, sizeof(opts));
-+	opts.we_mask = QM_INITFQ_WE_FQCTRL | QM_INITFQ_WE_CONTEXTA;
-+	opts.fqd.fq_ctrl = QM_FQCTRL_CTXASTASHING;
-+	opts.fqd.context_a.stashing.data_cl = STASH_DATA_CL;
-+	opts.fqd.context_a.stashing.context_cl = STASH_CTX_CL;
-+	if (qman_init_fq(&handler->rx, QMAN_INITFQ_FLAG_SCHED |
-+				QMAN_INITFQ_FLAG_LOCAL, &opts))
-+		panic("qman_init_fq(rx) failed");
-+	/* Set up tx */
-+	memset(&handler->tx, 0, sizeof(handler->tx));
-+	if (qman_create_fq(handler->fqid_tx, QMAN_FQ_FLAG_NO_MODIFY,
-+				&handler->tx))
-+		panic("qman_create_fq(tx) failed");
-+}
-+
-+static void init_phase2(void)
-+{
-+	int loop;
-+	u32 fqid = 0;
-+	u32 lfsr = 0xdeadbeef;
-+	struct hp_cpu *hp_cpu;
-+	struct hp_handler *handler;
-+
-+	for (loop = 0; loop < HP_PER_CPU; loop++) {
-+		list_for_each_entry(hp_cpu, &hp_cpu_list, node) {
-+			int ret;
-+			if (!loop)
-+				hp_cpu->iterator = list_first_entry(
-+						&hp_cpu->handlers,
-+						struct hp_handler, node);
-+			else
-+				hp_cpu->iterator = list_entry(
-+						hp_cpu->iterator->node.next,
-+						struct hp_handler, node);
-+			/* Rx FQID is the previous handler's Tx FQID */
-+			hp_cpu->iterator->fqid_rx = fqid;
-+			/* Allocate new FQID for Tx */
-+			ret = qman_alloc_fqid(&fqid);
-+			if (ret)
-+				panic("qman_alloc_fqid() failed");
-+			hp_cpu->iterator->fqid_tx = fqid;
-+			/* Rx mixer is the previous handler's Tx mixer */
-+			hp_cpu->iterator->rx_mixer = lfsr;
-+			/* Get new mixer for Tx */
-+			lfsr = do_lfsr(lfsr);
-+			hp_cpu->iterator->tx_mixer = lfsr;
-+		}
-+	}
-+	/* Fix up the first handler (fqid_rx==0, rx_mixer=0xdeadbeef) */
-+	hp_cpu = list_first_entry(&hp_cpu_list, struct hp_cpu, node);
-+	handler = list_first_entry(&hp_cpu->handlers, struct hp_handler, node);
-+	BUG_ON((handler->fqid_rx != 0) || (handler->rx_mixer != 0xdeadbeef));
-+	handler->fqid_rx = fqid;
-+	handler->rx_mixer = lfsr;
-+	/* and tag it as our "special" handler */
-+	special_handler = handler;
-+}
-+
-+static void init_phase3(void)
-+{
-+	int loop;
-+	struct hp_cpu *hp_cpu;
-+
-+	for (loop = 0; loop < HP_PER_CPU; loop++) {
-+		list_for_each_entry(hp_cpu, &hp_cpu_list, node) {
-+			if (!loop)
-+				hp_cpu->iterator = list_first_entry(
-+						&hp_cpu->handlers,
-+						struct hp_handler, node);
-+			else
-+				hp_cpu->iterator = list_entry(
-+						hp_cpu->iterator->node.next,
-+						struct hp_handler, node);
-+			preempt_disable();
-+			if (hp_cpu->processor_id == smp_processor_id())
-+				init_handler(hp_cpu->iterator);
-+			else
-+				smp_call_function_single(hp_cpu->processor_id,
-+					init_handler, hp_cpu->iterator, 1);
-+			preempt_enable();
-+		}
-+	}
-+}
-+
-+static void send_first_frame(void *ignore)
-+{
-+	u32 *p = special_handler->frame_ptr;
-+	u32 lfsr = HP_FIRST_WORD;
-+	int loop;
-+	struct qm_fd fd;
-+
-+	BUG_ON(special_handler->processor_id != smp_processor_id());
-+	memset(&fd, 0, sizeof(fd));
-+	qm_fd_addr_set64(&fd, special_handler->addr);
-+	fd.format = qm_fd_contig_big;
-+	fd.length29 = HP_NUM_WORDS * 4;
-+	for (loop = 0; loop < HP_NUM_WORDS; loop++, p++) {
-+		if (*p != lfsr)
-+			panic("corrupt frame data");
-+		*p ^= special_handler->tx_mixer;
-+		lfsr = do_lfsr(lfsr);
-+	}
-+	pr_info("Sending first frame\n");
-+	if (qman_enqueue(&special_handler->tx, &fd, 0))
-+		panic("qman_enqueue() failed");
-+}
-+
-+void qman_test_hotpotato(void)
-+{
-+	if (cpumask_weight(cpu_online_mask) < 2) {
-+		pr_info("qman_test_hotpotato, skip - only 1 CPU\n");
-+		return;
-+	}
-+
-+	pr_info("qman_test_hotpotato starting\n");
-+
-+	hp_cpu_list_length = 0;
-+	loop_counter = 0;
-+	hp_handler_slab = kmem_cache_create("hp_handler_slab",
-+			sizeof(struct hp_handler), L1_CACHE_BYTES,
-+			SLAB_HWCACHE_ALIGN, NULL);
-+	if (!hp_handler_slab)
-+		panic("kmem_cache_create() failed");
-+
-+	allocate_frame_data();
-+
-+	/* Init phase 1 */
-+	pr_info("Creating %d handlers per cpu...\n", HP_PER_CPU);
-+	if (on_all_cpus(create_per_cpu_handlers))
-+		panic("on_each_cpu() failed");
-+	pr_info("Number of cpus: %d, total of %d handlers\n",
-+		hp_cpu_list_length, hp_cpu_list_length * HP_PER_CPU);
-+
-+	init_phase2();
-+
-+	init_phase3();
-+
-+	preempt_disable();
-+	if (special_handler->processor_id == smp_processor_id())
-+		send_first_frame(NULL);
-+	else
-+		smp_call_function_single(special_handler->processor_id,
-+			send_first_frame, NULL, 1);
-+	preempt_enable();
-+
-+	wait_event(queue, loop_counter == HP_LOOPS);
-+	deallocate_frame_data();
-+	if (on_all_cpus(destroy_per_cpu_handlers))
-+		panic("on_each_cpu() failed");
-+	kmem_cache_destroy(hp_handler_slab);
-+	pr_info("qman_test_hotpotato finished\n");
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_qbman/qman_utility.c
-@@ -0,0 +1,129 @@
-+/* Copyright 2008-2011 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "qman_private.h"
-+
-+/* ----------------- */
-+/* --- FQID Pool --- */
-+
-+struct qman_fqid_pool {
-+	/* Base and size of the FQID range */
-+	u32 fqid_base;
-+	u32 total;
-+	/* Number of FQIDs currently "allocated" */
-+	u32 used;
-+	/* Allocation optimisation. When 'used<total', it is the index of an
-+	 * available FQID. Otherwise there are no available FQIDs, and this
-+	 * will be set when the next deallocation occurs. */
-+	u32 next;
-+	/* A bit-field representation of the FQID range. */
-+	unsigned long *bits;
-+};
-+
-+#define QLONG_BYTES	sizeof(unsigned long)
-+#define QLONG_BITS	(QLONG_BYTES * 8)
-+/* Number of 'longs' required for the given number of bits */
-+#define QNUM_LONGS(b)	(((b) + QLONG_BITS - 1) / QLONG_BITS)
-+/* Shorthand for the number of bytes of same (kmalloc, memset, etc) */
-+#define QNUM_BYTES(b)	(QNUM_LONGS(b) * QLONG_BYTES)
-+/* And in bits */
-+#define QNUM_BITS(b)	(QNUM_LONGS(b) * QLONG_BITS)
-+
-+struct qman_fqid_pool *qman_fqid_pool_create(u32 fqid_start, u32 num)
-+{
-+	struct qman_fqid_pool *pool = kmalloc(sizeof(*pool), GFP_KERNEL);
-+	unsigned int i;
-+
-+	BUG_ON(!num);
-+	if (!pool)
-+		return NULL;
-+	pool->fqid_base = fqid_start;
-+	pool->total = num;
-+	pool->used = 0;
-+	pool->next = 0;
-+	pool->bits = kzalloc(QNUM_BYTES(num), GFP_KERNEL);
-+	if (!pool->bits) {
-+		kfree(pool);
-+		return NULL;
-+	}
-+	/* If num is not an even multiple of QLONG_BITS (or even 8, for
-+	 * byte-oriented searching) then we fill the trailing bits with 1, to
-+	 * make them look allocated (permanently). */
-+	for (i = num + 1; i < QNUM_BITS(num); i++)
-+		set_bit(i, pool->bits);
-+	return pool;
-+}
-+EXPORT_SYMBOL(qman_fqid_pool_create);
-+
-+int qman_fqid_pool_destroy(struct qman_fqid_pool *pool)
-+{
-+	int ret = pool->used;
-+	kfree(pool->bits);
-+	kfree(pool);
-+	return ret;
-+}
-+EXPORT_SYMBOL(qman_fqid_pool_destroy);
-+
-+int qman_fqid_pool_alloc(struct qman_fqid_pool *pool, u32 *fqid)
-+{
-+	int ret;
-+	if (pool->used == pool->total)
-+		return -ENOMEM;
-+	*fqid = pool->fqid_base + pool->next;
-+	ret = test_and_set_bit(pool->next, pool->bits);
-+	BUG_ON(ret);
-+	if (++pool->used == pool->total)
-+		return 0;
-+	pool->next = find_next_zero_bit(pool->bits, pool->total, pool->next);
-+	if (pool->next >= pool->total)
-+		pool->next = find_first_zero_bit(pool->bits, pool->total);
-+	BUG_ON(pool->next >= pool->total);
-+	return 0;
-+}
-+EXPORT_SYMBOL(qman_fqid_pool_alloc);
-+
-+void qman_fqid_pool_free(struct qman_fqid_pool *pool, u32 fqid)
-+{
-+	int ret;
-+
-+	fqid -= pool->fqid_base;
-+	ret = test_and_clear_bit(fqid, pool->bits);
-+	BUG_ON(!ret);
-+	if (pool->used-- == pool->total)
-+		pool->next = fqid;
-+}
-+EXPORT_SYMBOL(qman_fqid_pool_free);
-+
-+u32 qman_fqid_pool_used(struct qman_fqid_pool *pool)
-+{
-+	return pool->used;
-+}
-+EXPORT_SYMBOL(qman_fqid_pool_used);
---- /dev/null
-+++ b/include/linux/fsl_bman.h
-@@ -0,0 +1,532 @@
-+/* Copyright 2008-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef FSL_BMAN_H
-+#define FSL_BMAN_H
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/* Last updated for v00.79 of the BG */
-+
-+/* Portal processing (interrupt) sources */
-+#define BM_PIRQ_RCRI	0x00000002	/* RCR Ring (below threshold) */
-+#define BM_PIRQ_BSCN	0x00000001	/* Buffer depletion State Change */
-+
-+/* This wrapper represents a bit-array for the depletion state of the 64 Bman
-+ * buffer pools. */
-+struct bman_depletion {
-+	u32 __state[2];
-+};
-+#define BMAN_DEPLETION_EMPTY { { 0x00000000, 0x00000000 } }
-+#define BMAN_DEPLETION_FULL { { 0xffffffff, 0xffffffff } }
-+#define __bmdep_word(x) ((x) >> 5)
-+#define __bmdep_shift(x) ((x) & 0x1f)
-+#define __bmdep_bit(x) (0x80000000 >> __bmdep_shift(x))
-+static inline void bman_depletion_init(struct bman_depletion *c)
-+{
-+	c->__state[0] = c->__state[1] = 0;
-+}
-+static inline void bman_depletion_fill(struct bman_depletion *c)
-+{
-+	c->__state[0] = c->__state[1] = ~0;
-+}
-+static inline int bman_depletion_get(const struct bman_depletion *c, u8 bpid)
-+{
-+	return c->__state[__bmdep_word(bpid)] & __bmdep_bit(bpid);
-+}
-+static inline void bman_depletion_set(struct bman_depletion *c, u8 bpid)
-+{
-+	c->__state[__bmdep_word(bpid)] |= __bmdep_bit(bpid);
-+}
-+static inline void bman_depletion_unset(struct bman_depletion *c, u8 bpid)
-+{
-+	c->__state[__bmdep_word(bpid)] &= ~__bmdep_bit(bpid);
-+}
-+
-+/* ------------------------------------------------------- */
-+/* --- Bman data structures (and associated constants) --- */
-+
-+/* Represents s/w corenet portal mapped data structures */
-+struct bm_rcr_entry;	/* RCR (Release Command Ring) entries */
-+struct bm_mc_command;	/* MC (Management Command) command */
-+struct bm_mc_result;	/* MC result */
-+
-+/* Code-reduction, define a wrapper for 48-bit buffers. In cases where a buffer
-+ * pool id specific to this buffer is needed (BM_RCR_VERB_CMD_BPID_MULTI,
-+ * BM_MCC_VERB_ACQUIRE), the 'bpid' field is used. */
-+struct bm_buffer {
-+	union {
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u8 __reserved1;
-+			u8 bpid;
-+			u16 hi; /* High 16-bits of 48-bit address */
-+			u32 lo; /* Low 32-bits of 48-bit address */
-+#else
-+			u32 lo;
-+			u16 hi;
-+			u8 bpid;
-+			u8 __reserved;
-+#endif
-+		};
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u64 __notaddress:16;
-+			u64 addr:48;
-+#else
-+			u64 addr:48;
-+			u64 __notaddress:16;
-+#endif
-+		};
-+		u64 opaque;
-+	};
-+} __aligned(8);
-+static inline u64 bm_buffer_get64(const struct bm_buffer *buf)
-+{
-+	return buf->addr;
-+}
-+static inline dma_addr_t bm_buf_addr(const struct bm_buffer *buf)
-+{
-+	return (dma_addr_t)buf->addr;
-+}
-+/* Macro, so we compile better if 'v' isn't always 64-bit */
-+#define bm_buffer_set64(buf, v) \
-+	do { \
-+		struct bm_buffer *__buf931 = (buf); \
-+		__buf931->hi = upper_32_bits(v); \
-+		__buf931->lo = lower_32_bits(v); \
-+	} while (0)
-+
-+/* See 1.5.3.5.4: "Release Command" */
-+struct bm_rcr_entry {
-+	union {
-+		struct {
-+			u8 __dont_write_directly__verb;
-+			u8 bpid; /* used with BM_RCR_VERB_CMD_BPID_SINGLE */
-+			u8 __reserved1[62];
-+		};
-+		struct bm_buffer bufs[8];
-+	};
-+} __packed;
-+#define BM_RCR_VERB_VBIT		0x80
-+#define BM_RCR_VERB_CMD_MASK		0x70	/* one of two values; */
-+#define BM_RCR_VERB_CMD_BPID_SINGLE	0x20
-+#define BM_RCR_VERB_CMD_BPID_MULTI	0x30
-+#define BM_RCR_VERB_BUFCOUNT_MASK	0x0f	/* values 1..8 */
-+
-+/* See 1.5.3.1: "Acquire Command" */
-+/* See 1.5.3.2: "Query Command" */
-+struct bm_mcc_acquire {
-+	u8 bpid;
-+	u8 __reserved1[62];
-+} __packed;
-+struct bm_mcc_query {
-+	u8 __reserved2[63];
-+} __packed;
-+struct bm_mc_command {
-+	u8 __dont_write_directly__verb;
-+	union {
-+		struct bm_mcc_acquire acquire;
-+		struct bm_mcc_query query;
-+	};
-+} __packed;
-+#define BM_MCC_VERB_VBIT		0x80
-+#define BM_MCC_VERB_CMD_MASK		0x70	/* where the verb contains; */
-+#define BM_MCC_VERB_CMD_ACQUIRE		0x10
-+#define BM_MCC_VERB_CMD_QUERY		0x40
-+#define BM_MCC_VERB_ACQUIRE_BUFCOUNT	0x0f	/* values 1..8 go here */
-+
-+/* See 1.5.3.3: "Acquire Response" */
-+/* See 1.5.3.4: "Query Response" */
-+struct bm_pool_state {
-+	u8 __reserved1[32];
-+	/* "availability state" and "depletion state" */
-+	struct {
-+		u8 __reserved1[8];
-+		/* Access using bman_depletion_***() */
-+		struct bman_depletion state;
-+	} as, ds;
-+};
-+struct bm_mc_result {
-+	union {
-+		struct {
-+			u8 verb;
-+			u8 __reserved1[63];
-+		};
-+		union {
-+			struct {
-+				u8 __reserved1;
-+				u8 bpid;
-+				u8 __reserved2[62];
-+			};
-+			struct bm_buffer bufs[8];
-+		} acquire;
-+		struct bm_pool_state query;
-+	};
-+} __packed;
-+#define BM_MCR_VERB_VBIT		0x80
-+#define BM_MCR_VERB_CMD_MASK		BM_MCC_VERB_CMD_MASK
-+#define BM_MCR_VERB_CMD_ACQUIRE		BM_MCC_VERB_CMD_ACQUIRE
-+#define BM_MCR_VERB_CMD_QUERY		BM_MCC_VERB_CMD_QUERY
-+#define BM_MCR_VERB_CMD_ERR_INVALID	0x60
-+#define BM_MCR_VERB_CMD_ERR_ECC		0x70
-+#define BM_MCR_VERB_ACQUIRE_BUFCOUNT	BM_MCC_VERB_ACQUIRE_BUFCOUNT /* 0..8 */
-+/* Determine the "availability state" of pool 'p' from a query result 'r' */
-+#define BM_MCR_QUERY_AVAILABILITY(r, p)	\
-+		bman_depletion_get(&r->query.as.state, p)
-+/* Determine the "depletion state" of pool 'p' from a query result 'r' */
-+#define BM_MCR_QUERY_DEPLETION(r, p)	\
-+		bman_depletion_get(&r->query.ds.state, p)
-+
-+/*******************************************************************/
-+/* Managed (aka "shared" or "mux/demux") portal, high-level i/face */
-+/*******************************************************************/
-+
-+	/* Portal and Buffer Pools */
-+	/* ----------------------- */
-+/* Represents a managed portal */
-+struct bman_portal;
-+
-+/* This object type represents Bman buffer pools. */
-+struct bman_pool;
-+
-+struct bman_portal_config {
-+	/* This is used for any "core-affine" portals, ie. default portals
-+	 * associated to the corresponding cpu. -1 implies that there is no core
-+	 * affinity configured. */
-+	int cpu;
-+	/* portal interrupt line */
-+	int irq;
-+	/* the unique index of this portal */
-+	u32 index;
-+	/* Is this portal shared? (If so, it has coarser locking and demuxes
-+	 * processing on behalf of other CPUs.) */
-+	int is_shared;
-+	/* These are the buffer pool IDs that may be used via this portal. */
-+	struct bman_depletion mask;
-+};
-+
-+/* This callback type is used when handling pool depletion entry/exit. The
-+ * 'cb_ctx' value is the opaque value associated with the pool object in
-+ * bman_new_pool(). 'depleted' is non-zero on depletion-entry, and zero on
-+ * depletion-exit. */
-+typedef void (*bman_cb_depletion)(struct bman_portal *bm,
-+			struct bman_pool *pool, void *cb_ctx, int depleted);
-+
-+/* This struct specifies parameters for a bman_pool object. */
-+struct bman_pool_params {
-+	/* index of the buffer pool to encapsulate (0-63), ignored if
-+	 * BMAN_POOL_FLAG_DYNAMIC_BPID is set. */
-+	u32 bpid;
-+	/* bit-mask of BMAN_POOL_FLAG_*** options */
-+	u32 flags;
-+	/* depletion-entry/exit callback, if BMAN_POOL_FLAG_DEPLETION is set */
-+	bman_cb_depletion cb;
-+	/* opaque user value passed as a parameter to 'cb' */
-+	void *cb_ctx;
-+	/* depletion-entry/exit thresholds, if BMAN_POOL_FLAG_THRESH is set. NB:
-+	 * this is only allowed if BMAN_POOL_FLAG_DYNAMIC_BPID is used *and*
-+	 * when run in the control plane (which controls Bman CCSR). This array
-+	 * matches the definition of bm_pool_set(). */
-+	u32 thresholds[4];
-+};
-+
-+/* Flags to bman_new_pool() */
-+#define BMAN_POOL_FLAG_NO_RELEASE    0x00000001 /* can't release to pool */
-+#define BMAN_POOL_FLAG_ONLY_RELEASE  0x00000002 /* can only release to pool */
-+#define BMAN_POOL_FLAG_DEPLETION     0x00000004 /* track depletion entry/exit */
-+#define BMAN_POOL_FLAG_DYNAMIC_BPID  0x00000008 /* (de)allocate bpid */
-+#define BMAN_POOL_FLAG_THRESH        0x00000010 /* set depletion thresholds */
-+#define BMAN_POOL_FLAG_STOCKPILE     0x00000020 /* stockpile to reduce hw ops */
-+
-+/* Flags to bman_release() */
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+#define BMAN_RELEASE_FLAG_WAIT       0x00000001 /* wait if RCR is full */
-+#define BMAN_RELEASE_FLAG_WAIT_INT   0x00000002 /* if we wait, interruptible? */
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+#define BMAN_RELEASE_FLAG_WAIT_SYNC  0x00000004 /* if wait, until consumed? */
-+#endif
-+#endif
-+#define BMAN_RELEASE_FLAG_NOW        0x00000008 /* issue immediate release */
-+
-+/* Flags to bman_acquire() */
-+#define BMAN_ACQUIRE_FLAG_STOCKPILE  0x00000001 /* no hw op, stockpile only */
-+
-+	/* Portal Management */
-+	/* ----------------- */
-+/**
-+ * bman_get_portal_config - get portal configuration settings
-+ *
-+ * This returns a read-only view of the current cpu's affine portal settings.
-+ */
-+const struct bman_portal_config *bman_get_portal_config(void);
-+
-+/**
-+ * bman_irqsource_get - return the portal work that is interrupt-driven
-+ *
-+ * Returns a bitmask of BM_PIRQ_**I processing sources that are currently
-+ * enabled for interrupt handling on the current cpu's affine portal. These
-+ * sources will trigger the portal interrupt and the interrupt handler (or a
-+ * tasklet/bottom-half it defers to) will perform the corresponding processing
-+ * work. The bman_poll_***() functions will only process sources that are not in
-+ * this bitmask. If the current CPU is sharing a portal hosted on another CPU,
-+ * this always returns zero.
-+ */
-+u32 bman_irqsource_get(void);
-+
-+/**
-+ * bman_irqsource_add - add processing sources to be interrupt-driven
-+ * @bits: bitmask of BM_PIRQ_**I processing sources
-+ *
-+ * Adds processing sources that should be interrupt-driven (rather than
-+ * processed via bman_poll_***() functions). Returns zero for success, or
-+ * -EINVAL if the current CPU is sharing a portal hosted on another CPU. */
-+int bman_irqsource_add(u32 bits);
-+
-+/**
-+ * bman_irqsource_remove - remove processing sources from being interrupt-driven
-+ * @bits: bitmask of BM_PIRQ_**I processing sources
-+ *
-+ * Removes processing sources from being interrupt-driven, so that they will
-+ * instead be processed via bman_poll_***() functions. Returns zero for success,
-+ * or -EINVAL if the current CPU is sharing a portal hosted on another CPU. */
-+int bman_irqsource_remove(u32 bits);
-+
-+/**
-+ * bman_affine_cpus - return a mask of cpus that have affine portals
-+ */
-+const cpumask_t *bman_affine_cpus(void);
-+
-+/**
-+ * bman_poll_slow - process anything that isn't interrupt-driven.
-+ *
-+ * This function does any portal processing that isn't interrupt-driven. If the
-+ * current CPU is sharing a portal hosted on another CPU, this function will
-+ * return -EINVAL, otherwise the return value is a bitmask of BM_PIRQ_* sources
-+ * indicating what interrupt sources were actually processed by the call.
-+ *
-+ * NB, unlike the legacy wrapper bman_poll(), this function will
-+ * deterministically check for the presence of portal processing work and do it,
-+ * which implies some latency even if there's nothing to do. The bman_poll()
-+ * wrapper on the other hand (like the qman_poll() wrapper) attenuates this by
-+ * checking for (and doing) portal processing infrequently. Ie. such that
-+ * qman_poll() and bman_poll() can be called from core-processing loops. Use
-+ * bman_poll_slow() when you yourself are deciding when to incur the overhead of
-+ * processing.
-+ */
-+u32 bman_poll_slow(void);
-+
-+/**
-+ * bman_poll - process anything that isn't interrupt-driven.
-+ *
-+ * Dispatcher logic on a cpu can use this to trigger any maintenance of the
-+ * affine portal. This function does whatever processing is not triggered by
-+ * interrupts. This is a legacy wrapper that can be used in core-processing
-+ * loops but mitigates the performance overhead of portal processing by
-+ * adaptively bypassing true portal processing most of the time. (Processing is
-+ * done once every 10 calls if the previous processing revealed that work needed
-+ * to be done, or once very 1000 calls if the previous processing revealed no
-+ * work needed doing.) If you wish to control this yourself, call
-+ * bman_poll_slow() instead, which always checks for portal processing work.
-+ */
-+void bman_poll(void);
-+
-+/**
-+ * bman_rcr_is_empty - Determine if portal's RCR is empty
-+ *
-+ * For use in situations where a cpu-affine caller needs to determine when all
-+ * releases for the local portal have been processed by Bman but can't use the
-+ * BMAN_RELEASE_FLAG_WAIT_SYNC flag to do this from the final bman_release().
-+ * The function forces tracking of RCR consumption (which normally doesn't
-+ * happen until release processing needs to find space to put new release
-+ * commands), and returns zero if the ring still has unprocessed entries,
-+ * non-zero if it is empty.
-+ */
-+int bman_rcr_is_empty(void);
-+
-+/**
-+ * bman_alloc_bpid_range - Allocate a contiguous range of BPIDs
-+ * @result: is set by the API to the base BPID of the allocated range
-+ * @count: the number of BPIDs required
-+ * @align: required alignment of the allocated range
-+ * @partial: non-zero if the API can return fewer than @count BPIDs
-+ *
-+ * Returns the number of buffer pools allocated, or a negative error code. If
-+ * @partial is non zero, the allocation request may return a smaller range of
-+ * BPs than requested (though alignment will be as requested). If @partial is
-+ * zero, the return value will either be 'count' or negative.
-+ */
-+int bman_alloc_bpid_range(u32 *result, u32 count, u32 align, int partial);
-+static inline int bman_alloc_bpid(u32 *result)
-+{
-+	int ret = bman_alloc_bpid_range(result, 1, 0, 0);
-+	return (ret > 0) ? 0 : ret;
-+}
-+
-+/**
-+ * bman_release_bpid_range - Release the specified range of buffer pool IDs
-+ * @bpid: the base BPID of the range to deallocate
-+ * @count: the number of BPIDs in the range
-+ *
-+ * This function can also be used to seed the allocator with ranges of BPIDs
-+ * that it can subsequently allocate from.
-+ */
-+void bman_release_bpid_range(u32 bpid, unsigned int count);
-+static inline void bman_release_bpid(u32 bpid)
-+{
-+	bman_release_bpid_range(bpid, 1);
-+}
-+
-+int bman_reserve_bpid_range(u32 bpid, unsigned int count);
-+static inline int bman_reserve_bpid(u32 bpid)
-+{
-+	return bman_reserve_bpid_range(bpid, 1);
-+}
-+
-+void bman_seed_bpid_range(u32 bpid, unsigned int count);
-+
-+
-+int bman_shutdown_pool(u32 bpid);
-+
-+	/* Pool management */
-+	/* --------------- */
-+/**
-+ * bman_new_pool - Allocates a Buffer Pool object
-+ * @params: parameters specifying the buffer pool ID and behaviour
-+ *
-+ * Creates a pool object for the given @params. A portal and the depletion
-+ * callback field of @params are only used if the BMAN_POOL_FLAG_DEPLETION flag
-+ * is set. NB, the fields from @params are copied into the new pool object, so
-+ * the structure provided by the caller can be released or reused after the
-+ * function returns.
-+ */
-+struct bman_pool *bman_new_pool(const struct bman_pool_params *params);
-+
-+/**
-+ * bman_free_pool - Deallocates a Buffer Pool object
-+ * @pool: the pool object to release
-+ *
-+ */
-+void bman_free_pool(struct bman_pool *pool);
-+
-+/**
-+ * bman_get_params - Returns a pool object's parameters.
-+ * @pool: the pool object
-+ *
-+ * The returned pointer refers to state within the pool object so must not be
-+ * modified and can no longer be read once the pool object is destroyed.
-+ */
-+const struct bman_pool_params *bman_get_params(const struct bman_pool *pool);
-+
-+/**
-+ * bman_release - Release buffer(s) to the buffer pool
-+ * @pool: the buffer pool object to release to
-+ * @bufs: an array of buffers to release
-+ * @num: the number of buffers in @bufs (1-8)
-+ * @flags: bit-mask of BMAN_RELEASE_FLAG_*** options
-+ *
-+ * Adds the given buffers to RCR entries. If the portal @p was created with the
-+ * "COMPACT" flag, then it will be using a compaction algorithm to improve
-+ * utilisation of RCR. As such, these buffers may join an existing ring entry
-+ * and/or it may not be issued right away so as to allow future releases to join
-+ * the same ring entry. Use the BMAN_RELEASE_FLAG_NOW flag to override this
-+ * behaviour by committing the RCR entry (or entries) right away. If the RCR
-+ * ring is full, the function will return -EBUSY unless BMAN_RELEASE_FLAG_WAIT
-+ * is selected, in which case it will sleep waiting for space to become
-+ * available in RCR. If the function receives a signal before such time (and
-+ * BMAN_RELEASE_FLAG_WAIT_INT is set), the function returns -EINTR. Otherwise,
-+ * it returns zero.
-+ */
-+int bman_release(struct bman_pool *pool, const struct bm_buffer *bufs, u8 num,
-+			u32 flags);
-+
-+/**
-+ * bman_acquire - Acquire buffer(s) from a buffer pool
-+ * @pool: the buffer pool object to acquire from
-+ * @bufs: array for storing the acquired buffers
-+ * @num: the number of buffers desired (@bufs is at least this big)
-+ *
-+ * Issues an "Acquire" command via the portal's management command interface.
-+ * The return value will be the number of buffers obtained from the pool, or a
-+ * negative error code if a h/w error or pool starvation was encountered. In
-+ * the latter case, the content of @bufs is undefined.
-+ */
-+int bman_acquire(struct bman_pool *pool, struct bm_buffer *bufs, u8 num,
-+			u32 flags);
-+
-+/**
-+ * bman_flush_stockpile - Flush stockpile buffer(s) to the buffer pool
-+ * @pool: the buffer pool object the stockpile belongs
-+ * @flags: bit-mask of BMAN_RELEASE_FLAG_*** options
-+ *
-+ * Adds stockpile buffers to RCR entries until the stockpile is empty.
-+ * The return value will be a negative error code if a h/w error occurred.
-+ * If BMAN_RELEASE_FLAG_NOW flag is passed and RCR ring is full,
-+ * -EAGAIN will be returned.
-+ */
-+int bman_flush_stockpile(struct bman_pool *pool, u32 flags);
-+
-+/**
-+ * bman_query_pools - Query all buffer pool states
-+ * @state: storage for the queried availability and depletion states
-+ */
-+int bman_query_pools(struct bm_pool_state *state);
-+
-+#ifdef CONFIG_FSL_BMAN_CONFIG
-+/**
-+ * bman_query_free_buffers - Query how many free buffers are in buffer pool
-+ * @pool: the buffer pool object to query
-+ *
-+ * Return the number of the free buffers
-+ */
-+u32 bman_query_free_buffers(struct bman_pool *pool);
-+
-+/**
-+ * bman_update_pool_thresholds - Change the buffer pool's depletion thresholds
-+ * @pool: the buffer pool object to which the thresholds will be set
-+ * @thresholds: the new thresholds
-+ */
-+int bman_update_pool_thresholds(struct bman_pool *pool, const u32 *thresholds);
-+#endif
-+
-+/**
-+ * The below bman_p_***() variant might be called in a situation that the cpu
-+ * which the portal affine to is not online yet.
-+ * @bman_portal specifies which portal the API will use.
-+*/
-+int bman_p_irqsource_add(struct bman_portal *p, __maybe_unused u32 bits);
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* FSL_BMAN_H */
---- /dev/null
-+++ b/include/linux/fsl_qman.h
-@@ -0,0 +1,3888 @@
-+/* Copyright 2008-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef FSL_QMAN_H
-+#define FSL_QMAN_H
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/* Last updated for v00.800 of the BG */
-+
-+/* Hardware constants */
-+#define QM_CHANNEL_SWPORTAL0 0
-+#define QMAN_CHANNEL_POOL1 0x21
-+#define QMAN_CHANNEL_CAAM 0x80
-+#define QMAN_CHANNEL_PME 0xa0
-+#define QMAN_CHANNEL_POOL1_REV3 0x401
-+#define QMAN_CHANNEL_CAAM_REV3 0x840
-+#define QMAN_CHANNEL_PME_REV3 0x860
-+#define QMAN_CHANNEL_DCE 0x8a0
-+#define QMAN_CHANNEL_DCE_QMANREV312 0x880
-+extern u16 qm_channel_pool1;
-+extern u16 qm_channel_caam;
-+extern u16 qm_channel_pme;
-+extern u16 qm_channel_dce;
-+enum qm_dc_portal {
-+	qm_dc_portal_fman0 = 0,
-+	qm_dc_portal_fman1 = 1,
-+	qm_dc_portal_caam = 2,
-+	qm_dc_portal_pme = 3,
-+	qm_dc_portal_rman = 4,
-+	qm_dc_portal_dce = 5
-+};
-+
-+/* Portal processing (interrupt) sources */
-+#define QM_PIRQ_CCSCI	0x00200000	/* CEETM Congestion State Change */
-+#define QM_PIRQ_CSCI	0x00100000	/* Congestion State Change */
-+#define QM_PIRQ_EQCI	0x00080000	/* Enqueue Command Committed */
-+#define QM_PIRQ_EQRI	0x00040000	/* EQCR Ring (below threshold) */
-+#define QM_PIRQ_DQRI	0x00020000	/* DQRR Ring (non-empty) */
-+#define QM_PIRQ_MRI	0x00010000	/* MR Ring (non-empty) */
-+/* This mask contains all the interrupt sources that need handling except DQRI,
-+ * ie. that if present should trigger slow-path processing. */
-+#define QM_PIRQ_SLOW	(QM_PIRQ_CSCI | QM_PIRQ_EQCI | QM_PIRQ_EQRI | \
-+			QM_PIRQ_MRI | QM_PIRQ_CCSCI)
-+
-+/* --- Clock speed --- */
-+/* A qman driver instance may or may not know the current qman clock speed.
-+ * However, certain CEETM calculations may not be possible if this is not known.
-+ * The 'set' function will only succeed (return zero) if the driver did not
-+ * already know the clock speed. Likewise, the 'get' function will only succeed
-+ * if the driver does know the clock speed (either because it knew when booting,
-+ * or was told via 'set'). In cases where software is running on a driver
-+ * instance that does not know the clock speed (eg. on a hypervised data-plane),
-+ * and the user can obtain the current qman clock speed by other means (eg. from
-+ * a message sent from the control-plane), then the 'set' function can be used
-+ * to enable rate-calculations in a driver where it would otherwise not be
-+ * possible. */
-+int qm_get_clock(u64 *clock_hz);
-+int qm_set_clock(u64 clock_hz);
-+
-+/* For qman_static_dequeue_*** APIs */
-+#define QM_SDQCR_CHANNELS_POOL_MASK	0x00007fff
-+/* for n in [1,15] */
-+#define QM_SDQCR_CHANNELS_POOL(n)	(0x00008000 >> (n))
-+/* for conversion from n of qm_channel */
-+static inline u32 QM_SDQCR_CHANNELS_POOL_CONV(u16 channel)
-+{
-+	return QM_SDQCR_CHANNELS_POOL(channel + 1 - qm_channel_pool1);
-+}
-+
-+/* For qman_volatile_dequeue(); Choose one PRECEDENCE. EXACT is optional. Use
-+ * NUMFRAMES(n) (6-bit) or NUMFRAMES_TILLEMPTY to fill in the frame-count. Use
-+ * FQID(n) to fill in the frame queue ID. */
-+#define QM_VDQCR_PRECEDENCE_VDQCR	0x0
-+#define QM_VDQCR_PRECEDENCE_SDQCR	0x80000000
-+#define QM_VDQCR_EXACT			0x40000000
-+#define QM_VDQCR_NUMFRAMES_MASK		0x3f000000
-+#define QM_VDQCR_NUMFRAMES_SET(n)	(((n) & 0x3f) << 24)
-+#define QM_VDQCR_NUMFRAMES_GET(n)	(((n) >> 24) & 0x3f)
-+#define QM_VDQCR_NUMFRAMES_TILLEMPTY	QM_VDQCR_NUMFRAMES_SET(0)
-+
-+
-+/* ------------------------------------------------------- */
-+/* --- Qman data structures (and associated constants) --- */
-+
-+/* Represents s/w corenet portal mapped data structures */
-+struct qm_eqcr_entry;	/* EQCR (EnQueue Command Ring) entries */
-+struct qm_dqrr_entry;	/* DQRR (DeQueue Response Ring) entries */
-+struct qm_mr_entry;	/* MR (Message Ring) entries */
-+struct qm_mc_command;	/* MC (Management Command) command */
-+struct qm_mc_result;	/* MC result */
-+
-+/* See David Lapp's "Frame formats" document, "dpateam", Jan 07, 2008 */
-+#define QM_FD_FORMAT_SG		0x4
-+#define QM_FD_FORMAT_LONG	0x2
-+#define QM_FD_FORMAT_COMPOUND	0x1
-+enum qm_fd_format {
-+	/* 'contig' implies a contiguous buffer, whereas 'sg' implies a
-+	 * scatter-gather table. 'big' implies a 29-bit length with no offset
-+	 * field, otherwise length is 20-bit and offset is 9-bit. 'compound'
-+	 * implies a s/g-like table, where each entry itself represents a frame
-+	 * (contiguous or scatter-gather) and the 29-bit "length" is
-+	 * interpreted purely for congestion calculations, ie. a "congestion
-+	 * weight". */
-+	qm_fd_contig = 0,
-+	qm_fd_contig_big = QM_FD_FORMAT_LONG,
-+	qm_fd_sg = QM_FD_FORMAT_SG,
-+	qm_fd_sg_big = QM_FD_FORMAT_SG | QM_FD_FORMAT_LONG,
-+	qm_fd_compound = QM_FD_FORMAT_COMPOUND
-+};
-+
-+/* Capitalised versions are un-typed but can be used in static expressions */
-+#define QM_FD_CONTIG	0
-+#define QM_FD_CONTIG_BIG QM_FD_FORMAT_LONG
-+#define QM_FD_SG	QM_FD_FORMAT_SG
-+#define QM_FD_SG_BIG	(QM_FD_FORMAT_SG | QM_FD_FORMAT_LONG)
-+#define QM_FD_COMPOUND	QM_FD_FORMAT_COMPOUND
-+
-+/* See 1.5.1.1: "Frame Descriptor (FD)" */
-+struct qm_fd {
-+	union {
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u8 dd:2;	/* dynamic debug */
-+			u8 liodn_offset:6;
-+			u8 bpid:8;	/* Buffer Pool ID */
-+			u8 eliodn_offset:4;
-+			u8 __reserved:4;
-+			u8 addr_hi;	/* high 8-bits of 40-bit address */
-+			u32 addr_lo;	/* low 32-bits of 40-bit address */
-+#else
-+			u32 addr_lo;    /* low 32-bits of 40-bit address */
-+			u8 addr_hi;     /* high 8-bits of 40-bit address */
-+			u8 __reserved:4;
-+			u8 eliodn_offset:4;
-+			u8 bpid:8;      /* Buffer Pool ID */
-+			u8 liodn_offset:6;
-+			u8 dd:2;        /* dynamic debug */
-+#endif
-+		};
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u64 __notaddress:24;
-+			u64 addr:40;
-+#else
-+			u64 addr:40;
-+			u64 __notaddress:24;
-+#endif
-+		};
-+		u64 opaque_addr;
-+	};
-+	/* The 'format' field indicates the interpretation of the remaining 29
-+	 * bits of the 32-bit word. For packing reasons, it is duplicated in the
-+	 * other union elements. Note, union'd structs are difficult to use with
-+	 * static initialisation under gcc, in which case use the "opaque" form
-+	 * with one of the macros. */
-+	union {
-+		/* For easier/faster copying of this part of the fd (eg. from a
-+		 * DQRR entry to an EQCR entry) copy 'opaque' */
-+		u32 opaque;
-+		/* If 'format' is _contig or _sg, 20b length and 9b offset */
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			enum qm_fd_format format:3;
-+			u16 offset:9;
-+			u32 length20:20;
-+#else
-+			u32 length20:20;
-+			u16 offset:9;
-+			enum qm_fd_format format:3;
-+#endif
-+		};
-+		/* If 'format' is _contig_big or _sg_big, 29b length */
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			enum qm_fd_format _format1:3;
-+			u32 length29:29;
-+#else
-+			u32 length29:29;
-+			enum qm_fd_format _format1:3;
-+#endif
-+		};
-+		/* If 'format' is _compound, 29b "congestion weight" */
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			enum qm_fd_format _format2:3;
-+			u32 cong_weight:29;
-+#else
-+			u32 cong_weight:29;
-+			enum qm_fd_format _format2:3;
-+#endif
-+		};
-+	};
-+	union {
-+		u32 cmd;
-+		u32 status;
-+	};
-+} __aligned(8);
-+#define QM_FD_DD_NULL		0x00
-+#define QM_FD_PID_MASK		0x3f
-+static inline u64 qm_fd_addr_get64(const struct qm_fd *fd)
-+{
-+	return fd->addr;
-+}
-+
-+static inline dma_addr_t qm_fd_addr(const struct qm_fd *fd)
-+{
-+	return (dma_addr_t)fd->addr;
-+}
-+/* Macro, so we compile better if 'v' isn't always 64-bit */
-+#define qm_fd_addr_set64(fd, v) \
-+	do { \
-+		struct qm_fd *__fd931 = (fd); \
-+		__fd931->addr = v; \
-+	} while (0)
-+
-+/* For static initialisation of FDs (which is complicated by the use of unions
-+ * in "struct qm_fd"), use the following macros. Note that;
-+ * - 'dd', 'pid' and 'bpid' are ignored because there's no static initialisation
-+ *   use-case),
-+ * - use capitalised QM_FD_*** formats for static initialisation.
-+ */
-+#define QM_FD_FMT_20(cmd, addr_hi, addr_lo, fmt, off, len) \
-+	{ 0, 0, 0, 0, 0, addr_hi, addr_lo, \
-+	{ (((fmt)&0x7) << 29) | (((off)&0x1ff) << 20) | ((len)&0xfffff) }, \
-+	{ cmd } }
-+#define QM_FD_FMT_29(cmd, addr_hi, addr_lo, fmt, len) \
-+	{ 0, 0, 0, 0, 0, addr_hi, addr_lo, \
-+	{ (((fmt)&0x7) << 29) | ((len)&0x1fffffff) }, \
-+	{ cmd } }
-+
-+/* See 2.2.1.3 Multi-Core Datapath Acceleration Architecture */
-+#define QM_SG_OFFSET_MASK 0x1FFF
-+struct qm_sg_entry {
-+	union {
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u8 __reserved1[3];
-+			u8 addr_hi;	/* high 8-bits of 40-bit address */
-+			u32 addr_lo;	/* low 32-bits of 40-bit address */
-+#else
-+			u32 addr_lo;	/* low 32-bits of 40-bit address */
-+			u8 addr_hi;	/* high 8-bits of 40-bit address */
-+			u8 __reserved1[3];
-+#endif
-+		};
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u64 __notaddress:24;
-+			u64 addr:40;
-+#else
-+			u64 addr:40;
-+			u64 __notaddress:24;
-+#endif
-+		};
-+		u64 opaque;
-+	};
-+	union {
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u32 extension:1;	/* Extension bit */
-+			u32 final:1;		/* Final bit */
-+			u32 length:30;
-+#else
-+			u32 length:30;
-+			u32 final:1;            /* Final bit */
-+			u32 extension:1;        /* Extension bit */
-+#endif
-+		};
-+		u32 sgt_efl;
-+	};
-+	u8 __reserved2;
-+	u8 bpid;
-+	union {
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u16 __reserved3:3;
-+			u16 offset:13;
-+#else
-+			u16 offset:13;
-+			u16 __reserved3:3;
-+#endif
-+		};
-+		u16 opaque_offset;
-+	};
-+} __packed;
-+union qm_sg_efl {
-+	struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+		u32 extension:1;	/* Extension bit */
-+		u32 final:1;		/* Final bit */
-+		u32 length:30;
-+#else
-+		u32 length:30;
-+		u32 final:1;            /* Final bit */
-+		u32 extension:1;        /* Extension bit */
-+#endif
-+	};
-+	u32 efl;
-+};
-+static inline dma_addr_t qm_sg_addr(const struct qm_sg_entry *sg)
-+{
-+	return (dma_addr_t)be64_to_cpu(sg->opaque) & 0xffffffffffULL;
-+}
-+static inline u8 qm_sg_entry_get_ext(const struct qm_sg_entry *sg)
-+{
-+	union qm_sg_efl u;
-+
-+	u.efl = be32_to_cpu(sg->sgt_efl);
-+	return u.extension;
-+}
-+static inline u8 qm_sg_entry_get_final(const struct qm_sg_entry *sg)
-+{
-+	union qm_sg_efl u;
-+
-+	u.efl = be32_to_cpu(sg->sgt_efl);
-+	return u.final;
-+}
-+static inline u32 qm_sg_entry_get_len(const struct qm_sg_entry *sg)
-+{
-+	union qm_sg_efl u;
-+
-+	u.efl = be32_to_cpu(sg->sgt_efl);
-+	return u.length;
-+}
-+static inline u8 qm_sg_entry_get_bpid(const struct qm_sg_entry *sg)
-+{
-+	return sg->bpid;
-+}
-+static inline u16 qm_sg_entry_get_offset(const struct qm_sg_entry *sg)
-+{
-+	u32 opaque_offset = be16_to_cpu(sg->opaque_offset);
-+
-+	return opaque_offset & 0x1fff;
-+}
-+
-+/* Macro, so we compile better if 'v' isn't always 64-bit */
-+#define qm_sg_entry_set64(sg, v) \
-+	do { \
-+		struct qm_sg_entry *__sg931 = (sg); \
-+		__sg931->opaque = cpu_to_be64(v); \
-+	} while (0)
-+#define qm_sg_entry_set_ext(sg, v) \
-+	do { \
-+		union qm_sg_efl __u932; \
-+		__u932.efl = be32_to_cpu((sg)->sgt_efl); \
-+		__u932.extension = v; \
-+		(sg)->sgt_efl = cpu_to_be32(__u932.efl); \
-+	} while (0)
-+#define qm_sg_entry_set_final(sg, v) \
-+	do { \
-+		union qm_sg_efl __u933; \
-+		__u933.efl = be32_to_cpu((sg)->sgt_efl); \
-+		__u933.final = v; \
-+		(sg)->sgt_efl = cpu_to_be32(__u933.efl); \
-+	} while (0)
-+#define qm_sg_entry_set_len(sg, v) \
-+	do { \
-+		union qm_sg_efl __u934; \
-+		__u934.efl = be32_to_cpu((sg)->sgt_efl); \
-+		__u934.length = v; \
-+		(sg)->sgt_efl = cpu_to_be32(__u934.efl); \
-+	} while (0)
-+#define qm_sg_entry_set_bpid(sg, v) \
-+	do { \
-+		struct qm_sg_entry *__u935 = (sg); \
-+		__u935->bpid = v; \
-+	} while (0)
-+#define qm_sg_entry_set_offset(sg, v) \
-+	do { \
-+		struct qm_sg_entry *__u936 = (sg); \
-+		__u936->opaque_offset = cpu_to_be16(v); \
-+	} while (0)
-+
-+/* See 1.5.8.1: "Enqueue Command" */
-+struct qm_eqcr_entry {
-+	u8 __dont_write_directly__verb;
-+	u8 dca;
-+	u16 seqnum;
-+	u32 orp;	/* 24-bit */
-+	u32 fqid;	/* 24-bit */
-+	u32 tag;
-+	struct qm_fd fd;
-+	u8 __reserved3[32];
-+} __packed;
-+#define QM_EQCR_VERB_VBIT		0x80
-+#define QM_EQCR_VERB_CMD_MASK		0x61	/* but only one value; */
-+#define QM_EQCR_VERB_CMD_ENQUEUE	0x01
-+#define QM_EQCR_VERB_COLOUR_MASK	0x18	/* 4 possible values; */
-+#define QM_EQCR_VERB_COLOUR_GREEN	0x00
-+#define QM_EQCR_VERB_COLOUR_YELLOW	0x08
-+#define QM_EQCR_VERB_COLOUR_RED		0x10
-+#define QM_EQCR_VERB_COLOUR_OVERRIDE	0x18
-+#define QM_EQCR_VERB_INTERRUPT		0x04	/* on command consumption */
-+#define QM_EQCR_VERB_ORP		0x02	/* enable order restoration */
-+#define QM_EQCR_DCA_ENABLE		0x80
-+#define QM_EQCR_DCA_PARK		0x40
-+#define QM_EQCR_DCA_IDXMASK		0x0f	/* "DQRR::idx" goes here */
-+#define QM_EQCR_SEQNUM_NESN		0x8000	/* Advance NESN */
-+#define QM_EQCR_SEQNUM_NLIS		0x4000	/* More fragments to come */
-+#define QM_EQCR_SEQNUM_SEQMASK		0x3fff	/* sequence number goes here */
-+#define QM_EQCR_FQID_NULL		0	/* eg. for an ORP seqnum hole */
-+
-+/* See 1.5.8.2: "Frame Dequeue Response" */
-+struct qm_dqrr_entry {
-+	u8 verb;
-+	u8 stat;
-+	u16 seqnum;	/* 15-bit */
-+	u8 tok;
-+	u8 __reserved2[3];
-+	u32 fqid;	/* 24-bit */
-+	u32 contextB;
-+	struct qm_fd fd;
-+	u8 __reserved4[32];
-+};
-+#define QM_DQRR_VERB_VBIT		0x80
-+#define QM_DQRR_VERB_MASK		0x7f	/* where the verb contains; */
-+#define QM_DQRR_VERB_FRAME_DEQUEUE	0x60	/* "this format" */
-+#define QM_DQRR_STAT_FQ_EMPTY		0x80	/* FQ empty */
-+#define QM_DQRR_STAT_FQ_HELDACTIVE	0x40	/* FQ held active */
-+#define QM_DQRR_STAT_FQ_FORCEELIGIBLE	0x20	/* FQ was force-eligible'd */
-+#define QM_DQRR_STAT_FD_VALID		0x10	/* has a non-NULL FD */
-+#define QM_DQRR_STAT_UNSCHEDULED	0x02	/* Unscheduled dequeue */
-+#define QM_DQRR_STAT_DQCR_EXPIRED	0x01	/* VDQCR or PDQCR expired*/
-+
-+/* See 1.5.8.3: "ERN Message Response" */
-+/* See 1.5.8.4: "FQ State Change Notification" */
-+struct qm_mr_entry {
-+	u8 verb;
-+	union {
-+		struct {
-+			u8 dca;
-+			u16 seqnum;
-+			u8 rc;		/* Rejection Code */
-+			u32 orp:24;
-+			u32 fqid;	/* 24-bit */
-+			u32 tag;
-+			struct qm_fd fd;
-+		} __packed ern;
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u8 colour:2;	/* See QM_MR_DCERN_COLOUR_* */
-+			u8 __reserved1:3;
-+			enum qm_dc_portal portal:3;
-+#else
-+			enum qm_dc_portal portal:3;
-+			u8 __reserved1:3;
-+			u8 colour:2;	/* See QM_MR_DCERN_COLOUR_* */
-+#endif
-+			u16 __reserved2;
-+			u8 rc;		/* Rejection Code */
-+			u32 __reserved3:24;
-+			u32 fqid;	/* 24-bit */
-+			u32 tag;
-+			struct qm_fd fd;
-+		} __packed dcern;
-+		struct {
-+			u8 fqs;		/* Frame Queue Status */
-+			u8 __reserved1[6];
-+			u32 fqid;	/* 24-bit */
-+			u32 contextB;
-+			u8 __reserved2[16];
-+		} __packed fq;		/* FQRN/FQRNI/FQRL/FQPN */
-+	};
-+	u8 __reserved2[32];
-+} __packed;
-+#define QM_MR_VERB_VBIT			0x80
-+/* The "ern" VERB bits match QM_EQCR_VERB_*** so aren't reproduced here. ERNs
-+ * originating from direct-connect portals ("dcern") use 0x20 as a verb which
-+ * would be invalid as a s/w enqueue verb. A s/w ERN can be distinguished from
-+ * the other MR types by noting if the 0x20 bit is unset. */
-+#define QM_MR_VERB_TYPE_MASK		0x27
-+#define QM_MR_VERB_DC_ERN		0x20
-+#define QM_MR_VERB_FQRN			0x21
-+#define QM_MR_VERB_FQRNI		0x22
-+#define QM_MR_VERB_FQRL			0x23
-+#define QM_MR_VERB_FQPN			0x24
-+#define QM_MR_RC_MASK			0xf0	/* contains one of; */
-+#define QM_MR_RC_CGR_TAILDROP		0x00
-+#define QM_MR_RC_WRED			0x10
-+#define QM_MR_RC_ERROR			0x20
-+#define QM_MR_RC_ORPWINDOW_EARLY	0x30
-+#define QM_MR_RC_ORPWINDOW_LATE		0x40
-+#define QM_MR_RC_FQ_TAILDROP		0x50
-+#define QM_MR_RC_ORPWINDOW_RETIRED	0x60
-+#define QM_MR_RC_ORP_ZERO		0x70
-+#define QM_MR_FQS_ORLPRESENT		0x02	/* ORL fragments to come */
-+#define QM_MR_FQS_NOTEMPTY		0x01	/* FQ has enqueued frames */
-+#define QM_MR_DCERN_COLOUR_GREEN	0x00
-+#define QM_MR_DCERN_COLOUR_YELLOW	0x01
-+#define QM_MR_DCERN_COLOUR_RED		0x02
-+#define QM_MR_DCERN_COLOUR_OVERRIDE	0x03
-+
-+/* An identical structure of FQD fields is present in the "Init FQ" command and
-+ * the "Query FQ" result, it's suctioned out into the "struct qm_fqd" type.
-+ * Within that, the 'stashing' and 'taildrop' pieces are also factored out, the
-+ * latter has two inlines to assist with converting to/from the mant+exp
-+ * representation. */
-+struct qm_fqd_stashing {
-+	/* See QM_STASHING_EXCL_<...> */
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+	u8 exclusive;
-+	u8 __reserved1:2;
-+	/* Numbers of cachelines */
-+	u8 annotation_cl:2;
-+	u8 data_cl:2;
-+	u8 context_cl:2;
-+#else
-+	u8 context_cl:2;
-+	u8 data_cl:2;
-+	u8 annotation_cl:2;
-+	u8 __reserved1:2;
-+	u8 exclusive;
-+#endif
-+} __packed;
-+struct qm_fqd_taildrop {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+	u16 __reserved1:3;
-+	u16 mant:8;
-+	u16 exp:5;
-+#else
-+	u16 exp:5;
-+	u16 mant:8;
-+	u16 __reserved1:3;
-+#endif
-+} __packed;
-+struct qm_fqd_oac {
-+	/* See QM_OAC_<...> */
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+	u8 oac:2; /* "Overhead Accounting Control" */
-+	u8 __reserved1:6;
-+#else
-+	u8 __reserved1:6;
-+	u8 oac:2; /* "Overhead Accounting Control" */
-+#endif
-+	/* Two's-complement value (-128 to +127) */
-+	signed char oal; /* "Overhead Accounting Length" */
-+} __packed;
-+struct qm_fqd {
-+	union {
-+		u8 orpc;
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u8 __reserved1:2;
-+			u8 orprws:3;
-+			u8 oa:1;
-+			u8 olws:2;
-+#else
-+			u8 olws:2;
-+			u8 oa:1;
-+			u8 orprws:3;
-+			u8 __reserved1:2;
-+#endif
-+		} __packed;
-+	};
-+	u8 cgid;
-+	u16 fq_ctrl;	/* See QM_FQCTRL_<...> */
-+	union {
-+		u16 dest_wq;
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u16 channel:13; /* qm_channel */
-+			u16 wq:3;
-+#else
-+			u16 wq:3;
-+			u16 channel:13; /* qm_channel */
-+#endif
-+		} __packed dest;
-+	};
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+	u16 __reserved2:1;
-+	u16 ics_cred:15;
-+#else
-+	u16 __reserved2:1;
-+	u16 ics_cred:15;
-+#endif
-+	/* For "Initialize Frame Queue" commands, the write-enable mask
-+	 * determines whether 'td' or 'oac_init' is observed. For query
-+	 * commands, this field is always 'td', and 'oac_query' (below) reflects
-+	 * the Overhead ACcounting values. */
-+	union {
-+		struct qm_fqd_taildrop td;
-+		struct qm_fqd_oac oac_init;
-+	};
-+	u32 context_b;
-+	union {
-+		/* Treat it as 64-bit opaque */
-+		u64 opaque;
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u32 hi;
-+			u32 lo;
-+#else
-+			u32 lo;
-+			u32 hi;
-+#endif
-+		};
-+		/* Treat it as s/w portal stashing config */
-+		/* See 1.5.6.7.1: "FQD Context_A field used for [...] */
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			struct qm_fqd_stashing stashing;
-+			/* 48-bit address of FQ context to
-+			 * stash, must be cacheline-aligned */
-+			u16 context_hi;
-+			u32 context_lo;
-+#else
-+			u32 context_lo;
-+			u16 context_hi;
-+			struct qm_fqd_stashing stashing;
-+#endif
-+		} __packed;
-+	} context_a;
-+	struct qm_fqd_oac oac_query;
-+} __packed;
-+/* 64-bit converters for context_hi/lo */
-+static inline u64 qm_fqd_stashing_get64(const struct qm_fqd *fqd)
-+{
-+	return ((u64)fqd->context_a.context_hi << 32) |
-+		(u64)fqd->context_a.context_lo;
-+}
-+static inline dma_addr_t qm_fqd_stashing_addr(const struct qm_fqd *fqd)
-+{
-+	return (dma_addr_t)qm_fqd_stashing_get64(fqd);
-+}
-+static inline u64 qm_fqd_context_a_get64(const struct qm_fqd *fqd)
-+{
-+	return ((u64)fqd->context_a.hi << 32) |
-+		(u64)fqd->context_a.lo;
-+}
-+/* Macro, so we compile better when 'v' isn't necessarily 64-bit */
-+#define qm_fqd_stashing_set64(fqd, v) \
-+	do { \
-+		struct qm_fqd *__fqd931 = (fqd); \
-+		__fqd931->context_a.context_hi = upper_32_bits(v); \
-+		__fqd931->context_a.context_lo = lower_32_bits(v); \
-+	} while (0)
-+#define qm_fqd_context_a_set64(fqd, v) \
-+	do { \
-+		struct qm_fqd *__fqd931 = (fqd); \
-+		__fqd931->context_a.hi = upper_32_bits(v); \
-+		__fqd931->context_a.lo = lower_32_bits(v); \
-+	} while (0)
-+/* convert a threshold value into mant+exp representation */
-+static inline int qm_fqd_taildrop_set(struct qm_fqd_taildrop *td, u32 val,
-+					int roundup)
-+{
-+	u32 e = 0;
-+	int oddbit = 0;
-+	if (val > 0xe0000000)
-+		return -ERANGE;
-+	while (val > 0xff) {
-+		oddbit = val & 1;
-+		val >>= 1;
-+		e++;
-+		if (roundup && oddbit)
-+			val++;
-+	}
-+	td->exp = e;
-+	td->mant = val;
-+	return 0;
-+}
-+/* and the other direction */
-+static inline u32 qm_fqd_taildrop_get(const struct qm_fqd_taildrop *td)
-+{
-+	return (u32)td->mant << td->exp;
-+}
-+
-+/* See 1.5.2.2: "Frame Queue Descriptor (FQD)" */
-+/* Frame Queue Descriptor (FQD) field 'fq_ctrl' uses these constants */
-+#define QM_FQCTRL_MASK		0x07ff	/* 'fq_ctrl' flags; */
-+#define QM_FQCTRL_CGE		0x0400	/* Congestion Group Enable */
-+#define QM_FQCTRL_TDE		0x0200	/* Tail-Drop Enable */
-+#define QM_FQCTRL_ORP		0x0100	/* ORP Enable */
-+#define QM_FQCTRL_CTXASTASHING	0x0080	/* Context-A stashing */
-+#define QM_FQCTRL_CPCSTASH	0x0040	/* CPC Stash Enable */
-+#define QM_FQCTRL_FORCESFDR	0x0008	/* High-priority SFDRs */
-+#define QM_FQCTRL_AVOIDBLOCK	0x0004	/* Don't block active */
-+#define QM_FQCTRL_HOLDACTIVE	0x0002	/* Hold active in portal */
-+#define QM_FQCTRL_PREFERINCACHE	0x0001	/* Aggressively cache FQD */
-+#define QM_FQCTRL_LOCKINCACHE	QM_FQCTRL_PREFERINCACHE /* older naming */
-+
-+/* See 1.5.6.7.1: "FQD Context_A field used for [...] */
-+/* Frame Queue Descriptor (FQD) field 'CONTEXT_A' uses these constants */
-+#define QM_STASHING_EXCL_ANNOTATION	0x04
-+#define QM_STASHING_EXCL_DATA		0x02
-+#define QM_STASHING_EXCL_CTX		0x01
-+
-+/* See 1.5.5.3: "Intra Class Scheduling" */
-+/* FQD field 'OAC' (Overhead ACcounting) uses these constants */
-+#define QM_OAC_ICS		0x2 /* Accounting for Intra-Class Scheduling */
-+#define QM_OAC_CG		0x1 /* Accounting for Congestion Groups */
-+
-+/* See 1.5.8.4: "FQ State Change Notification" */
-+/* This struct represents the 32-bit "WR_PARM_[GYR]" parameters in CGR fields
-+ * and associated commands/responses. The WRED parameters are calculated from
-+ * these fields as follows;
-+ *   MaxTH = MA * (2 ^ Mn)
-+ *   Slope = SA / (2 ^ Sn)
-+ *    MaxP = 4 * (Pn + 1)
-+ */
-+struct qm_cgr_wr_parm {
-+	union {
-+		u32 word;
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u32 MA:8;
-+			u32 Mn:5;
-+			u32 SA:7; /* must be between 64-127 */
-+			u32 Sn:6;
-+			u32 Pn:6;
-+#else
-+			u32 Pn:6;
-+			u32 Sn:6;
-+			u32 SA:7; /* must be between 64-127 */
-+			u32 Mn:5;
-+			u32 MA:8;
-+#endif
-+		} __packed;
-+	};
-+} __packed;
-+/* This struct represents the 13-bit "CS_THRES" CGR field. In the corresponding
-+ * management commands, this is padded to a 16-bit structure field, so that's
-+ * how we represent it here. The congestion state threshold is calculated from
-+ * these fields as follows;
-+ *   CS threshold = TA * (2 ^ Tn)
-+ */
-+struct qm_cgr_cs_thres {
-+	union {
-+		u16 hword;
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u16 __reserved:3;
-+			u16 TA:8;
-+			u16 Tn:5;
-+#else
-+			u16 Tn:5;
-+			u16 TA:8;
-+			u16 __reserved:3;
-+#endif
-+		} __packed;
-+	};
-+} __packed;
-+/* This identical structure of CGR fields is present in the "Init/Modify CGR"
-+ * commands and the "Query CGR" result. It's suctioned out here into its own
-+ * struct. */
-+struct __qm_mc_cgr {
-+	struct qm_cgr_wr_parm wr_parm_g;
-+	struct qm_cgr_wr_parm wr_parm_y;
-+	struct qm_cgr_wr_parm wr_parm_r;
-+	u8 wr_en_g;	/* boolean, use QM_CGR_EN */
-+	u8 wr_en_y;	/* boolean, use QM_CGR_EN */
-+	u8 wr_en_r;	/* boolean, use QM_CGR_EN */
-+	u8 cscn_en;	/* boolean, use QM_CGR_EN */
-+	union {
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u16 cscn_targ_upd_ctrl; /* use QM_CSCN_TARG_UDP_ */
-+			u16 cscn_targ_dcp_low;  /* CSCN_TARG_DCP low-16bits */
-+#else
-+			u16 cscn_targ_dcp_low;  /* CSCN_TARG_DCP low-16bits */
-+			u16 cscn_targ_upd_ctrl; /* use QM_CSCN_TARG_UDP_ */
-+#endif
-+		};
-+		u32 cscn_targ;	/* use QM_CGR_TARG_* */
-+	};
-+	u8 cstd_en;	/* boolean, use QM_CGR_EN */
-+	u8 cs;		/* boolean, only used in query response */
-+	union {
-+		/* use qm_cgr_cs_thres_set64() */
-+		struct qm_cgr_cs_thres cs_thres;
-+		u16 __cs_thres;
-+	};
-+	u8 mode;	/* QMAN_CGR_MODE_FRAME not supported in rev1.0 */
-+} __packed;
-+#define QM_CGR_EN		0x01 /* For wr_en_*, cscn_en, cstd_en */
-+#define QM_CGR_TARG_UDP_CTRL_WRITE_BIT	0x8000 /* value written to portal bit*/
-+#define QM_CGR_TARG_UDP_CTRL_DCP	0x4000 /* 0: SWP, 1: DCP */
-+#define QM_CGR_TARG_PORTAL(n)	(0x80000000 >> (n)) /* s/w portal, 0-9 */
-+#define QM_CGR_TARG_FMAN0	0x00200000 /* direct-connect portal: fman0 */
-+#define QM_CGR_TARG_FMAN1	0x00100000 /*                      : fman1 */
-+/* Convert CGR thresholds to/from "cs_thres" format */
-+static inline u64 qm_cgr_cs_thres_get64(const struct qm_cgr_cs_thres *th)
-+{
-+	return (u64)th->TA << th->Tn;
-+}
-+static inline int qm_cgr_cs_thres_set64(struct qm_cgr_cs_thres *th, u64 val,
-+					int roundup)
-+{
-+	u32 e = 0;
-+	int oddbit = 0;
-+	while (val > 0xff) {
-+		oddbit = val & 1;
-+		val >>= 1;
-+		e++;
-+		if (roundup && oddbit)
-+			val++;
-+	}
-+	th->Tn = e;
-+	th->TA = val;
-+	return 0;
-+}
-+
-+/* See 1.5.8.5.1: "Initialize FQ" */
-+/* See 1.5.8.5.2: "Query FQ" */
-+/* See 1.5.8.5.3: "Query FQ Non-Programmable Fields" */
-+/* See 1.5.8.5.4: "Alter FQ State Commands " */
-+/* See 1.5.8.6.1: "Initialize/Modify CGR" */
-+/* See 1.5.8.6.2: "CGR Test Write" */
-+/* See 1.5.8.6.3: "Query CGR" */
-+/* See 1.5.8.6.4: "Query Congestion Group State" */
-+struct qm_mcc_initfq {
-+	u8 __reserved1;
-+	u16 we_mask;	/* Write Enable Mask */
-+	u32 fqid;	/* 24-bit */
-+	u16 count;	/* Initialises 'count+1' FQDs */
-+	struct qm_fqd fqd; /* the FQD fields go here */
-+	u8 __reserved3[30];
-+} __packed;
-+struct qm_mcc_queryfq {
-+	u8 __reserved1[3];
-+	u32 fqid;	/* 24-bit */
-+	u8 __reserved2[56];
-+} __packed;
-+struct qm_mcc_queryfq_np {
-+	u8 __reserved1[3];
-+	u32 fqid;	/* 24-bit */
-+	u8 __reserved2[56];
-+} __packed;
-+struct qm_mcc_alterfq {
-+	u8 __reserved1[3];
-+	u32 fqid;	/* 24-bit */
-+	u8 __reserved2;
-+	u8 count;	/* number of consecutive FQID */
-+	u8 __reserved3[10];
-+	u32 context_b;	/* frame queue context b */
-+	u8 __reserved4[40];
-+} __packed;
-+struct qm_mcc_initcgr {
-+	u8 __reserved1;
-+	u16 we_mask;	/* Write Enable Mask */
-+	struct __qm_mc_cgr cgr;	/* CGR fields */
-+	u8 __reserved2[2];
-+	u8 cgid;
-+	u8 __reserved4[32];
-+} __packed;
-+struct qm_mcc_cgrtestwrite {
-+	u8 __reserved1[2];
-+	u8 i_bcnt_hi:8;/* high 8-bits of 40-bit "Instant" */
-+	u32 i_bcnt_lo;	/* low 32-bits of 40-bit */
-+	u8 __reserved2[23];
-+	u8 cgid;
-+	u8 __reserved3[32];
-+} __packed;
-+struct qm_mcc_querycgr {
-+	u8 __reserved1[30];
-+	u8 cgid;
-+	u8 __reserved2[32];
-+} __packed;
-+struct qm_mcc_querycongestion {
-+	u8 __reserved[63];
-+} __packed;
-+struct qm_mcc_querywq {
-+	u8 __reserved;
-+	/* select channel if verb != QUERYWQ_DEDICATED */
-+	union {
-+		u16 channel_wq; /* ignores wq (3 lsbits) */
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u16 id:13; /* qm_channel */
-+			u16 __reserved1:3;
-+#else
-+			u16 __reserved1:3;
-+			u16 id:13; /* qm_channel */
-+#endif
-+		} __packed channel;
-+	};
-+	u8 __reserved2[60];
-+} __packed;
-+
-+struct qm_mcc_ceetm_lfqmt_config {
-+	u8 __reserved1[4];
-+	u32 lfqid:24;
-+	u8 __reserved2[2];
-+	u16 cqid;
-+	u8 __reserved3[2];
-+	u16 dctidx;
-+	u8 __reserved4[48];
-+} __packed;
-+
-+struct qm_mcc_ceetm_lfqmt_query {
-+	u8 __reserved1[4];
-+	u32 lfqid:24;
-+	u8 __reserved2[56];
-+} __packed;
-+
-+struct qm_mcc_ceetm_cq_config {
-+	u8 __reserved1;
-+	u16 cqid;
-+	u8 dcpid;
-+	u8 __reserved2;
-+	u16 ccgid;
-+	u8 __reserved3[56];
-+} __packed;
-+
-+struct qm_mcc_ceetm_cq_query {
-+	u8 __reserved1;
-+	u16 cqid;
-+	u8 dcpid;
-+	u8 __reserved2[59];
-+} __packed;
-+
-+struct qm_mcc_ceetm_dct_config {
-+	u8 __reserved1;
-+	u16 dctidx;
-+	u8 dcpid;
-+	u8 __reserved2[15];
-+	u32 context_b;
-+	u64 context_a;
-+	u8 __reserved3[32];
-+} __packed;
-+
-+struct qm_mcc_ceetm_dct_query {
-+	u8 __reserved1;
-+	u16 dctidx;
-+	u8 dcpid;
-+	u8 __reserved2[59];
-+} __packed;
-+
-+struct qm_mcc_ceetm_class_scheduler_config {
-+	u8 __reserved1;
-+	u16 cqcid;
-+	u8 dcpid;
-+	u8 __reserved2[6];
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+	u8 gpc_reserved:1;
-+	u8 gpc_combine_flag:1;
-+	u8 gpc_prio_b:3;
-+	u8 gpc_prio_a:3;
-+#else
-+	u8 gpc_prio_a:3;
-+	u8 gpc_prio_b:3;
-+	u8 gpc_combine_flag:1;
-+	u8 gpc_reserved:1;
-+#endif
-+	u16 crem;
-+	u16 erem;
-+	u8 w[8];
-+	u8 __reserved3[40];
-+} __packed;
-+
-+struct qm_mcc_ceetm_class_scheduler_query {
-+	u8 __reserved1;
-+	u16 cqcid;
-+	u8 dcpid;
-+	u8 __reserved2[59];
-+} __packed;
-+
-+#define CEETM_COMMAND_CHANNEL_MAPPING	(0 << 12)
-+#define CEETM_COMMAND_SP_MAPPING	(1 << 12)
-+#define CEETM_COMMAND_CHANNEL_SHAPER	(2 << 12)
-+#define CEETM_COMMAND_LNI_SHAPER	(3 << 12)
-+#define CEETM_COMMAND_TCFC		(4 << 12)
-+
-+#define CEETM_CCGRID_MASK	0x01FF
-+#define CEETM_CCGR_CM_CONFIGURE	(0 << 14)
-+#define CEETM_CCGR_DN_CONFIGURE	(1 << 14)
-+#define CEETM_CCGR_TEST_WRITE	(2 << 14)
-+#define CEETM_CCGR_CM_QUERY	(0 << 14)
-+#define CEETM_CCGR_DN_QUERY	(1 << 14)
-+#define CEETM_CCGR_DN_QUERY_FLUSH	(2 << 14)
-+#define CEETM_QUERY_CONGESTION_STATE (3 << 14)
-+
-+struct qm_mcc_ceetm_mapping_shaper_tcfc_config {
-+	u8 __reserved1;
-+	u16 cid;
-+	u8 dcpid;
-+	union {
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u8 map_shaped:1;
-+			u8 map_reserved:4;
-+			u8 map_lni_id:3;
-+#else
-+			u8 map_lni_id:3;
-+			u8 map_reserved:4;
-+			u8 map_shaped:1;
-+#endif
-+			u8 __reserved2[58];
-+		} __packed channel_mapping;
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u8 map_reserved:5;
-+			u8 map_lni_id:3;
-+#else
-+			u8 map_lni_id:3;
-+			u8 map_reserved:5;
-+#endif
-+			u8 __reserved2[58];
-+		} __packed sp_mapping;
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u8 cpl:1;
-+			u8 cpl_reserved:2;
-+			u8 oal:5;
-+#else
-+			u8 oal:5;
-+			u8 cpl_reserved:2;
-+			u8 cpl:1;
-+#endif
-+			u32 crtcr:24;
-+			u32 ertcr:24;
-+			u16 crtbl;
-+			u16 ertbl;
-+			u8 mps;	/* This will be hardcoded by driver with 60 */
-+			u8 __reserved2[47];
-+		} __packed shaper_config;
-+		struct {
-+			u8 __reserved2[11];
-+			u64 lnitcfcc;
-+			u8 __reserved3[40];
-+		} __packed tcfc_config;
-+	};
-+} __packed;
-+
-+struct qm_mcc_ceetm_mapping_shaper_tcfc_query {
-+	u8 __reserved1;
-+	u16 cid;
-+	u8 dcpid;
-+	u8 __reserved2[59];
-+} __packed;
-+
-+struct qm_mcc_ceetm_ccgr_config {
-+	u8 __reserved1;
-+	u16 ccgrid;
-+	u8 dcpid;
-+	u8 __reserved2;
-+	u16 we_mask;
-+	union {
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u8 ctl_reserved:1;
-+			u8 ctl_wr_en_g:1;
-+			u8 ctl_wr_en_y:1;
-+			u8 ctl_wr_en_r:1;
-+			u8 ctl_td_en:1;
-+			u8 ctl_td_mode:1;
-+			u8 ctl_cscn_en:1;
-+			u8 ctl_mode:1;
-+#else
-+			u8 ctl_mode:1;
-+			u8 ctl_cscn_en:1;
-+			u8 ctl_td_mode:1;
-+			u8 ctl_td_en:1;
-+			u8 ctl_wr_en_r:1;
-+			u8 ctl_wr_en_y:1;
-+			u8 ctl_wr_en_g:1;
-+			u8 ctl_reserved:1;
-+#endif
-+			u8 cdv;
-+			u16 cscn_tupd;
-+			u8 oal;
-+			u8 __reserved3;
-+			struct qm_cgr_cs_thres cs_thres;
-+			struct qm_cgr_cs_thres cs_thres_x;
-+			struct qm_cgr_cs_thres td_thres;
-+			struct qm_cgr_wr_parm wr_parm_g;
-+			struct qm_cgr_wr_parm wr_parm_y;
-+			struct qm_cgr_wr_parm wr_parm_r;
-+		} __packed cm_config;
-+		struct {
-+			u8 dnc;
-+			u8 dn0;
-+			u8 dn1;
-+			u64 dnba:40;
-+			u8 __reserved3[2];
-+			u16 dnth_0;
-+			u8 __reserved4[2];
-+			u16 dnth_1;
-+			u8 __reserved5[8];
-+		} __packed dn_config;
-+		struct {
-+			u8 __reserved3[3];
-+			u64 i_cnt:40;
-+			u8 __reserved4[16];
-+		} __packed test_write;
-+	};
-+	u8 __reserved5[32];
-+} __packed;
-+
-+struct qm_mcc_ceetm_ccgr_query {
-+	u8 __reserved1;
-+	u16 ccgrid;
-+	u8 dcpid;
-+	u8 __reserved2[59];
-+} __packed;
-+
-+struct qm_mcc_ceetm_cq_peek_pop_xsfdrread {
-+	u8 __reserved1;
-+	u16 cqid;
-+	u8 dcpid;
-+	u8 ct;
-+	u16 xsfdr;
-+	u8 __reserved2[56];
-+} __packed;
-+
-+#define CEETM_QUERY_DEQUEUE_STATISTICS 0x00
-+#define CEETM_QUERY_DEQUEUE_CLEAR_STATISTICS 0x01
-+#define CEETM_WRITE_DEQUEUE_STATISTICS 0x02
-+#define CEETM_QUERY_REJECT_STATISTICS 0x03
-+#define CEETM_QUERY_REJECT_CLEAR_STATISTICS 0x04
-+#define CEETM_WRITE_REJECT_STATISTICS 0x05
-+struct qm_mcc_ceetm_statistics_query_write {
-+	u8 __reserved1;
-+	u16 cid;
-+	u8 dcpid;
-+	u8 ct;
-+	u8 __reserved2[13];
-+	u64 frm_cnt:40;
-+	u8 __reserved3[2];
-+	u64 byte_cnt:48;
-+	u8 __reserved[32];
-+} __packed;
-+
-+struct qm_mc_command {
-+	u8 __dont_write_directly__verb;
-+	union {
-+		struct qm_mcc_initfq initfq;
-+		struct qm_mcc_queryfq queryfq;
-+		struct qm_mcc_queryfq_np queryfq_np;
-+		struct qm_mcc_alterfq alterfq;
-+		struct qm_mcc_initcgr initcgr;
-+		struct qm_mcc_cgrtestwrite cgrtestwrite;
-+		struct qm_mcc_querycgr querycgr;
-+		struct qm_mcc_querycongestion querycongestion;
-+		struct qm_mcc_querywq querywq;
-+		struct qm_mcc_ceetm_lfqmt_config lfqmt_config;
-+		struct qm_mcc_ceetm_lfqmt_query lfqmt_query;
-+		struct qm_mcc_ceetm_cq_config cq_config;
-+		struct qm_mcc_ceetm_cq_query cq_query;
-+		struct qm_mcc_ceetm_dct_config dct_config;
-+		struct qm_mcc_ceetm_dct_query dct_query;
-+		struct qm_mcc_ceetm_class_scheduler_config csch_config;
-+		struct qm_mcc_ceetm_class_scheduler_query csch_query;
-+		struct qm_mcc_ceetm_mapping_shaper_tcfc_config mst_config;
-+		struct qm_mcc_ceetm_mapping_shaper_tcfc_query mst_query;
-+		struct qm_mcc_ceetm_ccgr_config ccgr_config;
-+		struct qm_mcc_ceetm_ccgr_query ccgr_query;
-+		struct qm_mcc_ceetm_cq_peek_pop_xsfdrread cq_ppxr;
-+		struct qm_mcc_ceetm_statistics_query_write stats_query_write;
-+	};
-+} __packed;
-+#define QM_MCC_VERB_VBIT		0x80
-+#define QM_MCC_VERB_MASK		0x7f	/* where the verb contains; */
-+#define QM_MCC_VERB_INITFQ_PARKED	0x40
-+#define QM_MCC_VERB_INITFQ_SCHED	0x41
-+#define QM_MCC_VERB_QUERYFQ		0x44
-+#define QM_MCC_VERB_QUERYFQ_NP		0x45	/* "non-programmable" fields */
-+#define QM_MCC_VERB_QUERYWQ		0x46
-+#define QM_MCC_VERB_QUERYWQ_DEDICATED	0x47
-+#define QM_MCC_VERB_ALTER_SCHED		0x48	/* Schedule FQ */
-+#define QM_MCC_VERB_ALTER_FE		0x49	/* Force Eligible FQ */
-+#define QM_MCC_VERB_ALTER_RETIRE	0x4a	/* Retire FQ */
-+#define QM_MCC_VERB_ALTER_OOS		0x4b	/* Take FQ out of service */
-+#define QM_MCC_VERB_ALTER_FQXON		0x4d	/* FQ XON */
-+#define QM_MCC_VERB_ALTER_FQXOFF	0x4e	/* FQ XOFF */
-+#define QM_MCC_VERB_INITCGR		0x50
-+#define QM_MCC_VERB_MODIFYCGR		0x51
-+#define QM_MCC_VERB_CGRTESTWRITE	0x52
-+#define QM_MCC_VERB_QUERYCGR		0x58
-+#define QM_MCC_VERB_QUERYCONGESTION	0x59
-+/* INITFQ-specific flags */
-+#define QM_INITFQ_WE_MASK		0x01ff	/* 'Write Enable' flags; */
-+#define QM_INITFQ_WE_OAC		0x0100
-+#define QM_INITFQ_WE_ORPC		0x0080
-+#define QM_INITFQ_WE_CGID		0x0040
-+#define QM_INITFQ_WE_FQCTRL		0x0020
-+#define QM_INITFQ_WE_DESTWQ		0x0010
-+#define QM_INITFQ_WE_ICSCRED		0x0008
-+#define QM_INITFQ_WE_TDTHRESH		0x0004
-+#define QM_INITFQ_WE_CONTEXTB		0x0002
-+#define QM_INITFQ_WE_CONTEXTA		0x0001
-+/* INITCGR/MODIFYCGR-specific flags */
-+#define QM_CGR_WE_MASK			0x07ff	/* 'Write Enable Mask'; */
-+#define QM_CGR_WE_WR_PARM_G		0x0400
-+#define QM_CGR_WE_WR_PARM_Y		0x0200
-+#define QM_CGR_WE_WR_PARM_R		0x0100
-+#define QM_CGR_WE_WR_EN_G		0x0080
-+#define QM_CGR_WE_WR_EN_Y		0x0040
-+#define QM_CGR_WE_WR_EN_R		0x0020
-+#define QM_CGR_WE_CSCN_EN		0x0010
-+#define QM_CGR_WE_CSCN_TARG		0x0008
-+#define QM_CGR_WE_CSTD_EN		0x0004
-+#define QM_CGR_WE_CS_THRES		0x0002
-+#define QM_CGR_WE_MODE			0x0001
-+
-+/* See 1.5.9.7 CEETM Management Commands */
-+#define QM_CEETM_VERB_LFQMT_CONFIG	0x70
-+#define QM_CEETM_VERB_LFQMT_QUERY	0x71
-+#define QM_CEETM_VERB_CQ_CONFIG		0x72
-+#define QM_CEETM_VERB_CQ_QUERY		0x73
-+#define QM_CEETM_VERB_DCT_CONFIG	0x74
-+#define QM_CEETM_VERB_DCT_QUERY		0x75
-+#define QM_CEETM_VERB_CLASS_SCHEDULER_CONFIG		0x76
-+#define QM_CEETM_VERB_CLASS_SCHEDULER_QUERY		0x77
-+#define QM_CEETM_VERB_MAPPING_SHAPER_TCFC_CONFIG	0x78
-+#define QM_CEETM_VERB_MAPPING_SHAPER_TCFC_QUERY		0x79
-+#define QM_CEETM_VERB_CCGR_CONFIG			0x7A
-+#define QM_CEETM_VERB_CCGR_QUERY			0x7B
-+#define QM_CEETM_VERB_CQ_PEEK_POP_XFDRREAD		0x7C
-+#define QM_CEETM_VERB_STATISTICS_QUERY_WRITE		0x7D
-+
-+/* See 1.5.8.5.1: "Initialize FQ" */
-+/* See 1.5.8.5.2: "Query FQ" */
-+/* See 1.5.8.5.3: "Query FQ Non-Programmable Fields" */
-+/* See 1.5.8.5.4: "Alter FQ State Commands " */
-+/* See 1.5.8.6.1: "Initialize/Modify CGR" */
-+/* See 1.5.8.6.2: "CGR Test Write" */
-+/* See 1.5.8.6.3: "Query CGR" */
-+/* See 1.5.8.6.4: "Query Congestion Group State" */
-+struct qm_mcr_initfq {
-+	u8 __reserved1[62];
-+} __packed;
-+struct qm_mcr_queryfq {
-+	u8 __reserved1[8];
-+	struct qm_fqd fqd;	/* the FQD fields are here */
-+	u8 __reserved2[30];
-+} __packed;
-+struct qm_mcr_queryfq_np {
-+	u8 __reserved1;
-+	u8 state;	/* QM_MCR_NP_STATE_*** */
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+	u8 __reserved2;
-+	u32 fqd_link:24;
-+	u16 __reserved3:2;
-+	u16 odp_seq:14;
-+	u16 __reserved4:2;
-+	u16 orp_nesn:14;
-+	u16 __reserved5:1;
-+	u16 orp_ea_hseq:15;
-+	u16 __reserved6:1;
-+	u16 orp_ea_tseq:15;
-+	u8 __reserved7;
-+	u32 orp_ea_hptr:24;
-+	u8 __reserved8;
-+	u32 orp_ea_tptr:24;
-+	u8 __reserved9;
-+	u32 pfdr_hptr:24;
-+	u8 __reserved10;
-+	u32 pfdr_tptr:24;
-+	u8 __reserved11[5];
-+	u8 __reserved12:7;
-+	u8 is:1;
-+	u16 ics_surp;
-+	u32 byte_cnt;
-+	u8 __reserved13;
-+	u32 frm_cnt:24;
-+	u32 __reserved14;
-+	u16 ra1_sfdr;	/* QM_MCR_NP_RA1_*** */
-+	u16 ra2_sfdr;	/* QM_MCR_NP_RA2_*** */
-+	u16 __reserved15;
-+	u16 od1_sfdr;	/* QM_MCR_NP_OD1_*** */
-+	u16 od2_sfdr;	/* QM_MCR_NP_OD2_*** */
-+	u16 od3_sfdr;	/* QM_MCR_NP_OD3_*** */
-+#else
-+	u8 __reserved2;
-+	u32 fqd_link:24;
-+
-+	u16 odp_seq:14;
-+	u16 __reserved3:2;
-+
-+	u16 orp_nesn:14;
-+	u16 __reserved4:2;
-+
-+	u16 orp_ea_hseq:15;
-+	u16 __reserved5:1;
-+
-+	u16 orp_ea_tseq:15;
-+	u16 __reserved6:1;
-+
-+	u8 __reserved7;
-+	u32 orp_ea_hptr:24;
-+
-+	u8 __reserved8;
-+	u32 orp_ea_tptr:24;
-+
-+	u8 __reserved9;
-+	u32 pfdr_hptr:24;
-+
-+	u8 __reserved10;
-+	u32 pfdr_tptr:24;
-+
-+	u8 __reserved11[5];
-+	u8 is:1;
-+	u8 __reserved12:7;
-+	u16 ics_surp;
-+	u32 byte_cnt;
-+	u8 __reserved13;
-+	u32 frm_cnt:24;
-+	u32 __reserved14;
-+	u16 ra1_sfdr;	/* QM_MCR_NP_RA1_*** */
-+	u16 ra2_sfdr;	/* QM_MCR_NP_RA2_*** */
-+	u16 __reserved15;
-+	u16 od1_sfdr;	/* QM_MCR_NP_OD1_*** */
-+	u16 od2_sfdr;	/* QM_MCR_NP_OD2_*** */
-+	u16 od3_sfdr;	/* QM_MCR_NP_OD3_*** */
-+#endif
-+} __packed;
-+
-+
-+struct qm_mcr_alterfq {
-+	u8 fqs;		/* Frame Queue Status */
-+	u8 __reserved1[61];
-+} __packed;
-+struct qm_mcr_initcgr {
-+	u8 __reserved1[62];
-+} __packed;
-+struct qm_mcr_cgrtestwrite {
-+	u16 __reserved1;
-+	struct __qm_mc_cgr cgr; /* CGR fields */
-+	u8 __reserved2[3];
-+	u32 __reserved3:24;
-+	u32 i_bcnt_hi:8;/* high 8-bits of 40-bit "Instant" */
-+	u32 i_bcnt_lo;	/* low 32-bits of 40-bit */
-+	u32 __reserved4:24;
-+	u32 a_bcnt_hi:8;/* high 8-bits of 40-bit "Average" */
-+	u32 a_bcnt_lo;	/* low 32-bits of 40-bit */
-+	u16 lgt;	/* Last Group Tick */
-+	u16 wr_prob_g;
-+	u16 wr_prob_y;
-+	u16 wr_prob_r;
-+	u8 __reserved5[8];
-+} __packed;
-+struct qm_mcr_querycgr {
-+	u16 __reserved1;
-+	struct __qm_mc_cgr cgr; /* CGR fields */
-+	u8 __reserved2[3];
-+	union {
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u32 __reserved3:24;
-+			u32 i_bcnt_hi:8;/* high 8-bits of 40-bit "Instant" */
-+			u32 i_bcnt_lo;	/* low 32-bits of 40-bit */
-+#else
-+			u32 i_bcnt_lo;	/* low 32-bits of 40-bit */
-+			u32 i_bcnt_hi:8;/* high 8-bits of 40-bit "Instant" */
-+			u32 __reserved3:24;
-+#endif
-+		};
-+		u64 i_bcnt;
-+	};
-+	union {
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u32 __reserved4:24;
-+			u32 a_bcnt_hi:8;/* high 8-bits of 40-bit "Average" */
-+			u32 a_bcnt_lo;	/* low 32-bits of 40-bit */
-+#else
-+			u32 a_bcnt_lo;	/* low 32-bits of 40-bit */
-+			u32 a_bcnt_hi:8;/* high 8-bits of 40-bit "Average" */
-+			u32 __reserved4:24;
-+#endif
-+		};
-+		u64 a_bcnt;
-+	};
-+	union {
-+		u32 cscn_targ_swp[4];
-+		u8 __reserved5[16];
-+	};
-+} __packed;
-+static inline u64 qm_mcr_querycgr_i_get64(const struct qm_mcr_querycgr *q)
-+{
-+	return be64_to_cpu(q->i_bcnt);
-+}
-+static inline u64 qm_mcr_querycgr_a_get64(const struct qm_mcr_querycgr *q)
-+{
-+	return be64_to_cpu(q->a_bcnt);
-+}
-+static inline u64 qm_mcr_cgrtestwrite_i_get64(
-+					const struct qm_mcr_cgrtestwrite *q)
-+{
-+	return be64_to_cpu(((u64)q->i_bcnt_hi << 32) | (u64)q->i_bcnt_lo);
-+}
-+static inline u64 qm_mcr_cgrtestwrite_a_get64(
-+					const struct qm_mcr_cgrtestwrite *q)
-+{
-+	return be64_to_cpu(((u64)q->a_bcnt_hi << 32) | (u64)q->a_bcnt_lo);
-+}
-+/* Macro, so we compile better if 'v' isn't always 64-bit */
-+#define qm_mcr_querycgr_i_set64(q, v) \
-+	do { \
-+		struct qm_mcr_querycgr *__q931 = (fd); \
-+		__q931->i_bcnt_hi = upper_32_bits(v); \
-+		__q931->i_bcnt_lo = lower_32_bits(v); \
-+	} while (0)
-+#define qm_mcr_querycgr_a_set64(q, v) \
-+	do { \
-+		struct qm_mcr_querycgr *__q931 = (fd); \
-+		__q931->a_bcnt_hi = upper_32_bits(v); \
-+		__q931->a_bcnt_lo = lower_32_bits(v); \
-+	} while (0)
-+struct __qm_mcr_querycongestion {
-+	u32 __state[8];
-+};
-+struct qm_mcr_querycongestion {
-+	u8 __reserved[30];
-+	/* Access this struct using QM_MCR_QUERYCONGESTION() */
-+	struct __qm_mcr_querycongestion state;
-+} __packed;
-+struct qm_mcr_querywq {
-+	union {
-+		u16 channel_wq; /* ignores wq (3 lsbits) */
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u16 id:13; /* qm_channel */
-+			u16 __reserved:3;
-+#else
-+			u16 __reserved:3;
-+			u16 id:13; /* qm_channel */
-+#endif
-+		} __packed channel;
-+	};
-+	u8 __reserved[28];
-+	u32 wq_len[8];
-+} __packed;
-+
-+/* QMAN CEETM Management Command Response */
-+struct qm_mcr_ceetm_lfqmt_config {
-+	u8 __reserved1[62];
-+} __packed;
-+struct qm_mcr_ceetm_lfqmt_query {
-+	u8 __reserved1[8];
-+	u16 cqid;
-+	u8 __reserved2[2];
-+	u16 dctidx;
-+	u8 __reserved3[2];
-+	u16 ccgid;
-+	u8 __reserved4[44];
-+} __packed;
-+
-+struct qm_mcr_ceetm_cq_config {
-+	u8 __reserved1[62];
-+} __packed;
-+
-+struct qm_mcr_ceetm_cq_query {
-+	u8 __reserved1[4];
-+	u16 ccgid;
-+	u16 state;
-+	u32 pfdr_hptr:24;
-+	u32 pfdr_tptr:24;
-+	u16 od1_xsfdr;
-+	u16 od2_xsfdr;
-+	u16 od3_xsfdr;
-+	u16 od4_xsfdr;
-+	u16 od5_xsfdr;
-+	u16 od6_xsfdr;
-+	u16 ra1_xsfdr;
-+	u16 ra2_xsfdr;
-+	u8 __reserved2;
-+	u32 frm_cnt:24;
-+	u8 __reserved333[28];
-+} __packed;
-+
-+struct qm_mcr_ceetm_dct_config {
-+	u8 __reserved1[62];
-+} __packed;
-+
-+struct qm_mcr_ceetm_dct_query {
-+	u8 __reserved1[18];
-+	u32 context_b;
-+	u64 context_a;
-+	u8 __reserved2[32];
-+} __packed;
-+
-+struct qm_mcr_ceetm_class_scheduler_config {
-+	u8 __reserved1[62];
-+} __packed;
-+
-+struct qm_mcr_ceetm_class_scheduler_query {
-+	u8 __reserved1[9];
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+	u8 gpc_reserved:1;
-+	u8 gpc_combine_flag:1;
-+	u8 gpc_prio_b:3;
-+	u8 gpc_prio_a:3;
-+#else
-+	u8 gpc_prio_a:3;
-+	u8 gpc_prio_b:3;
-+	u8 gpc_combine_flag:1;
-+	u8 gpc_reserved:1;
-+#endif
-+	u16 crem;
-+	u16 erem;
-+	u8 w[8];
-+	u8 __reserved2[5];
-+	u32 wbfslist:24;
-+	u32 d8;
-+	u32 d9;
-+	u32 d10;
-+	u32 d11;
-+	u32 d12;
-+	u32 d13;
-+	u32 d14;
-+	u32 d15;
-+} __packed;
-+
-+struct qm_mcr_ceetm_mapping_shaper_tcfc_config {
-+	u16 cid;
-+	u8 __reserved2[60];
-+} __packed;
-+
-+struct qm_mcr_ceetm_mapping_shaper_tcfc_query {
-+	u16 cid;
-+	u8 __reserved1;
-+	union {
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u8 map_shaped:1;
-+			u8 map_reserved:4;
-+			u8 map_lni_id:3;
-+#else
-+			u8 map_lni_id:3;
-+			u8 map_reserved:4;
-+			u8 map_shaped:1;
-+#endif
-+			u8 __reserved2[58];
-+		} __packed channel_mapping_query;
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u8 map_reserved:5;
-+			u8 map_lni_id:3;
-+#else
-+			u8 map_lni_id:3;
-+			u8 map_reserved:5;
-+#endif
-+			u8 __reserved2[58];
-+		} __packed sp_mapping_query;
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u8 cpl:1;
-+			u8 cpl_reserved:2;
-+			u8 oal:5;
-+#else
-+			u8 oal:5;
-+			u8 cpl_reserved:2;
-+			u8 cpl:1;
-+#endif
-+			u32 crtcr:24;
-+			u32 ertcr:24;
-+			u16 crtbl;
-+			u16 ertbl;
-+			u8 mps;
-+			u8 __reserved2[15];
-+			u32 crat;
-+			u32 erat;
-+			u8 __reserved3[24];
-+		} __packed shaper_query;
-+		struct {
-+			u8 __reserved1[11];
-+			u64 lnitcfcc;
-+			u8 __reserved3[40];
-+		} __packed tcfc_query;
-+	};
-+} __packed;
-+
-+struct qm_mcr_ceetm_ccgr_config {
-+	u8 __reserved1[46];
-+	union {
-+		u8 __reserved2[8];
-+		struct {
-+			u16 timestamp;
-+			u16 wr_porb_g;
-+			u16 wr_prob_y;
-+			u16 wr_prob_r;
-+		} __packed test_write;
-+	};
-+	u8 __reserved3[8];
-+} __packed;
-+
-+struct qm_mcr_ceetm_ccgr_query {
-+	u8 __reserved1[6];
-+	union {
-+		struct {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+			u8 ctl_reserved:1;
-+			u8 ctl_wr_en_g:1;
-+			u8 ctl_wr_en_y:1;
-+			u8 ctl_wr_en_r:1;
-+			u8 ctl_td_en:1;
-+			u8 ctl_td_mode:1;
-+			u8 ctl_cscn_en:1;
-+			u8 ctl_mode:1;
-+#else
-+			u8 ctl_mode:1;
-+			u8 ctl_cscn_en:1;
-+			u8 ctl_td_mode:1;
-+			u8 ctl_td_en:1;
-+			u8 ctl_wr_en_r:1;
-+			u8 ctl_wr_en_y:1;
-+			u8 ctl_wr_en_g:1;
-+			u8 ctl_reserved:1;
-+#endif
-+			u8 cdv;
-+			u8 __reserved2[2];
-+			u8 oal;
-+			u8 __reserved3;
-+			struct qm_cgr_cs_thres cs_thres;
-+			struct qm_cgr_cs_thres cs_thres_x;
-+			struct qm_cgr_cs_thres td_thres;
-+			struct qm_cgr_wr_parm wr_parm_g;
-+			struct qm_cgr_wr_parm wr_parm_y;
-+			struct qm_cgr_wr_parm wr_parm_r;
-+			u16 cscn_targ_dcp;
-+			u8 dcp_lsn;
-+			u64 i_cnt:40;
-+			u8 __reserved4[3];
-+			u64 a_cnt:40;
-+			u32 cscn_targ_swp[4];
-+		} __packed cm_query;
-+		struct {
-+			u8 dnc;
-+			u8 dn0;
-+			u8 dn1;
-+			u64 dnba:40;
-+			u8 __reserved2[2];
-+			u16 dnth_0;
-+			u8 __reserved3[2];
-+			u16 dnth_1;
-+			u8 __reserved4[10];
-+			u16 dnacc_0;
-+			u8 __reserved5[2];
-+			u16 dnacc_1;
-+			u8 __reserved6[24];
-+		} __packed dn_query;
-+		struct {
-+			u8 __reserved2[24];
-+			struct  __qm_mcr_querycongestion state;
-+		} __packed congestion_state;
-+
-+	};
-+} __packed;
-+
-+struct qm_mcr_ceetm_cq_peek_pop_xsfdrread {
-+	u8 stat;
-+	u8 __reserved1[11];
-+	u16 dctidx;
-+	struct qm_fd fd;
-+	u8 __reserved2[32];
-+} __packed;
-+
-+struct qm_mcr_ceetm_statistics_query {
-+	u8 __reserved1[17];
-+	u64 frm_cnt:40;
-+	u8 __reserved2[2];
-+	u64 byte_cnt:48;
-+	u8 __reserved3[32];
-+} __packed;
-+
-+struct qm_mc_result {
-+	u8 verb;
-+	u8 result;
-+	union {
-+		struct qm_mcr_initfq initfq;
-+		struct qm_mcr_queryfq queryfq;
-+		struct qm_mcr_queryfq_np queryfq_np;
-+		struct qm_mcr_alterfq alterfq;
-+		struct qm_mcr_initcgr initcgr;
-+		struct qm_mcr_cgrtestwrite cgrtestwrite;
-+		struct qm_mcr_querycgr querycgr;
-+		struct qm_mcr_querycongestion querycongestion;
-+		struct qm_mcr_querywq querywq;
-+		struct qm_mcr_ceetm_lfqmt_config lfqmt_config;
-+		struct qm_mcr_ceetm_lfqmt_query lfqmt_query;
-+		struct qm_mcr_ceetm_cq_config cq_config;
-+		struct qm_mcr_ceetm_cq_query cq_query;
-+		struct qm_mcr_ceetm_dct_config dct_config;
-+		struct qm_mcr_ceetm_dct_query dct_query;
-+		struct qm_mcr_ceetm_class_scheduler_config csch_config;
-+		struct qm_mcr_ceetm_class_scheduler_query csch_query;
-+		struct qm_mcr_ceetm_mapping_shaper_tcfc_config mst_config;
-+		struct qm_mcr_ceetm_mapping_shaper_tcfc_query mst_query;
-+		struct qm_mcr_ceetm_ccgr_config ccgr_config;
-+		struct qm_mcr_ceetm_ccgr_query ccgr_query;
-+		struct qm_mcr_ceetm_cq_peek_pop_xsfdrread cq_ppxr;
-+		struct qm_mcr_ceetm_statistics_query stats_query;
-+	};
-+} __packed;
-+
-+#define QM_MCR_VERB_RRID		0x80
-+#define QM_MCR_VERB_MASK		QM_MCC_VERB_MASK
-+#define QM_MCR_VERB_INITFQ_PARKED	QM_MCC_VERB_INITFQ_PARKED
-+#define QM_MCR_VERB_INITFQ_SCHED	QM_MCC_VERB_INITFQ_SCHED
-+#define QM_MCR_VERB_QUERYFQ		QM_MCC_VERB_QUERYFQ
-+#define QM_MCR_VERB_QUERYFQ_NP		QM_MCC_VERB_QUERYFQ_NP
-+#define QM_MCR_VERB_QUERYWQ		QM_MCC_VERB_QUERYWQ
-+#define QM_MCR_VERB_QUERYWQ_DEDICATED	QM_MCC_VERB_QUERYWQ_DEDICATED
-+#define QM_MCR_VERB_ALTER_SCHED		QM_MCC_VERB_ALTER_SCHED
-+#define QM_MCR_VERB_ALTER_FE		QM_MCC_VERB_ALTER_FE
-+#define QM_MCR_VERB_ALTER_RETIRE	QM_MCC_VERB_ALTER_RETIRE
-+#define QM_MCR_VERB_ALTER_OOS		QM_MCC_VERB_ALTER_OOS
-+#define QM_MCR_RESULT_NULL		0x00
-+#define QM_MCR_RESULT_OK		0xf0
-+#define QM_MCR_RESULT_ERR_FQID		0xf1
-+#define QM_MCR_RESULT_ERR_FQSTATE	0xf2
-+#define QM_MCR_RESULT_ERR_NOTEMPTY	0xf3	/* OOS fails if FQ is !empty */
-+#define QM_MCR_RESULT_ERR_BADCHANNEL	0xf4
-+#define QM_MCR_RESULT_PENDING		0xf8
-+#define QM_MCR_RESULT_ERR_BADCOMMAND	0xff
-+#define QM_MCR_NP_STATE_FE		0x10
-+#define QM_MCR_NP_STATE_R		0x08
-+#define QM_MCR_NP_STATE_MASK		0x07	/* Reads FQD::STATE; */
-+#define QM_MCR_NP_STATE_OOS		0x00
-+#define QM_MCR_NP_STATE_RETIRED		0x01
-+#define QM_MCR_NP_STATE_TEN_SCHED	0x02
-+#define QM_MCR_NP_STATE_TRU_SCHED	0x03
-+#define QM_MCR_NP_STATE_PARKED		0x04
-+#define QM_MCR_NP_STATE_ACTIVE		0x05
-+#define QM_MCR_NP_PTR_MASK		0x07ff	/* for RA[12] & OD[123] */
-+#define QM_MCR_NP_RA1_NRA(v)		(((v) >> 14) & 0x3)	/* FQD::NRA */
-+#define QM_MCR_NP_RA2_IT(v)		(((v) >> 14) & 0x1)	/* FQD::IT */
-+#define QM_MCR_NP_OD1_NOD(v)		(((v) >> 14) & 0x3)	/* FQD::NOD */
-+#define QM_MCR_NP_OD3_NPC(v)		(((v) >> 14) & 0x3)	/* FQD::NPC */
-+#define QM_MCR_FQS_ORLPRESENT		0x02	/* ORL fragments to come */
-+#define QM_MCR_FQS_NOTEMPTY		0x01	/* FQ has enqueued frames */
-+/* This extracts the state for congestion group 'n' from a query response.
-+ * Eg.
-+ *   u8 cgr = [...];
-+ *   struct qm_mc_result *res = [...];
-+ *   printf("congestion group %d congestion state: %d\n", cgr,
-+ *       QM_MCR_QUERYCONGESTION(&res->querycongestion.state, cgr));
-+ */
-+#define __CGR_WORD(num)		(num >> 5)
-+#define __CGR_SHIFT(num)	(num & 0x1f)
-+#define __CGR_NUM		(sizeof(struct __qm_mcr_querycongestion) << 3)
-+static inline int QM_MCR_QUERYCONGESTION(struct __qm_mcr_querycongestion *p,
-+					u8 cgr)
-+{
-+	return p->__state[__CGR_WORD(cgr)] & (0x80000000 >> __CGR_SHIFT(cgr));
-+}
-+
-+
-+/*********************/
-+/* Utility interface */
-+/*********************/
-+
-+/* Represents an allocator over a range of FQIDs. NB, accesses are not locked,
-+ * spinlock them yourself if needed. */
-+struct qman_fqid_pool;
-+
-+/* Create/destroy a FQID pool, num must be a multiple of 32. NB, _destroy()
-+ * always succeeds, but returns non-zero if there were "leaked" FQID
-+ * allocations. */
-+struct qman_fqid_pool *qman_fqid_pool_create(u32 fqid_start, u32 num);
-+int qman_fqid_pool_destroy(struct qman_fqid_pool *pool);
-+/* Alloc/free a FQID from the range. _alloc() returns zero for success. */
-+int qman_fqid_pool_alloc(struct qman_fqid_pool *pool, u32 *fqid);
-+void qman_fqid_pool_free(struct qman_fqid_pool *pool, u32 fqid);
-+u32 qman_fqid_pool_used(struct qman_fqid_pool *pool);
-+
-+/*******************************************************************/
-+/* Managed (aka "shared" or "mux/demux") portal, high-level i/face */
-+/*******************************************************************/
-+
-+	/* Portal and Frame Queues */
-+	/* ----------------------- */
-+/* Represents a managed portal */
-+struct qman_portal;
-+
-+/* This object type represents Qman frame queue descriptors (FQD), it is
-+ * cacheline-aligned, and initialised by qman_create_fq(). The structure is
-+ * defined further down. */
-+struct qman_fq;
-+
-+/* This object type represents a Qman congestion group, it is defined further
-+ * down. */
-+struct qman_cgr;
-+
-+struct qman_portal_config {
-+	/* If the caller enables DQRR stashing (and thus wishes to operate the
-+	 * portal from only one cpu), this is the logical CPU that the portal
-+	 * will stash to. Whether stashing is enabled or not, this setting is
-+	 * also used for any "core-affine" portals, ie. default portals
-+	 * associated to the corresponding cpu. -1 implies that there is no core
-+	 * affinity configured. */
-+	int cpu;
-+	/* portal interrupt line */
-+	int irq;
-+	/* the unique index of this portal */
-+	u32 index;
-+	/* Is this portal shared? (If so, it has coarser locking and demuxes
-+	 * processing on behalf of other CPUs.) */
-+	int is_shared;
-+	/* The portal's dedicated channel id, use this value for initialising
-+	 * frame queues to target this portal when scheduled. */
-+	u16 channel;
-+	/* A mask of which pool channels this portal has dequeue access to
-+	 * (using QM_SDQCR_CHANNELS_POOL(n) for the bitmask) */
-+	u32 pools;
-+};
-+
-+/* This enum, and the callback type that returns it, are used when handling
-+ * dequeued frames via DQRR. Note that for "null" callbacks registered with the
-+ * portal object (for handling dequeues that do not demux because contextB is
-+ * NULL), the return value *MUST* be qman_cb_dqrr_consume. */
-+enum qman_cb_dqrr_result {
-+	/* DQRR entry can be consumed */
-+	qman_cb_dqrr_consume,
-+	/* Like _consume, but requests parking - FQ must be held-active */
-+	qman_cb_dqrr_park,
-+	/* Does not consume, for DCA mode only. This allows out-of-order
-+	 * consumes by explicit calls to qman_dca() and/or the use of implicit
-+	 * DCA via EQCR entries. */
-+	qman_cb_dqrr_defer,
-+	/* Stop processing without consuming this ring entry. Exits the current
-+	 * qman_poll_dqrr() or interrupt-handling, as appropriate. If within an
-+	 * interrupt handler, the callback would typically call
-+	 * qman_irqsource_remove(QM_PIRQ_DQRI) before returning this value,
-+	 * otherwise the interrupt will reassert immediately. */
-+	qman_cb_dqrr_stop,
-+	/* Like qman_cb_dqrr_stop, but consumes the current entry. */
-+	qman_cb_dqrr_consume_stop
-+};
-+typedef enum qman_cb_dqrr_result (*qman_cb_dqrr)(struct qman_portal *qm,
-+					struct qman_fq *fq,
-+					const struct qm_dqrr_entry *dqrr);
-+
-+/* This callback type is used when handling ERNs, FQRNs and FQRLs via MR. They
-+ * are always consumed after the callback returns. */
-+typedef void (*qman_cb_mr)(struct qman_portal *qm, struct qman_fq *fq,
-+				const struct qm_mr_entry *msg);
-+
-+/* This callback type is used when handling DCP ERNs */
-+typedef void (*qman_cb_dc_ern)(struct qman_portal *qm,
-+				const struct qm_mr_entry *msg);
-+
-+/* s/w-visible states. Ie. tentatively scheduled + truly scheduled + active +
-+ * held-active + held-suspended are just "sched". Things like "retired" will not
-+ * be assumed until it is complete (ie. QMAN_FQ_STATE_CHANGING is set until
-+ * then, to indicate it's completing and to gate attempts to retry the retire
-+ * command). Note, park commands do not set QMAN_FQ_STATE_CHANGING because it's
-+ * technically impossible in the case of enqueue DCAs (which refer to DQRR ring
-+ * index rather than the FQ that ring entry corresponds to), so repeated park
-+ * commands are allowed (if you're silly enough to try) but won't change FQ
-+ * state, and the resulting park notifications move FQs from "sched" to
-+ * "parked". */
-+enum qman_fq_state {
-+	qman_fq_state_oos,
-+	qman_fq_state_parked,
-+	qman_fq_state_sched,
-+	qman_fq_state_retired
-+};
-+
-+/* Frame queue objects (struct qman_fq) are stored within memory passed to
-+ * qman_create_fq(), as this allows stashing of caller-provided demux callback
-+ * pointers at no extra cost to stashing of (driver-internal) FQ state. If the
-+ * caller wishes to add per-FQ state and have it benefit from dequeue-stashing,
-+ * they should;
-+ *
-+ * (a) extend the qman_fq structure with their state; eg.
-+ *
-+ *     // myfq is allocated and driver_fq callbacks filled in;
-+ *     struct my_fq {
-+ *         struct qman_fq base;
-+ *         int an_extra_field;
-+ *         [ ... add other fields to be associated with each FQ ...]
-+ *     } *myfq = some_my_fq_allocator();
-+ *     struct qman_fq *fq = qman_create_fq(fqid, flags, &myfq->base);
-+ *
-+ *     // in a dequeue callback, access extra fields from 'fq' via a cast;
-+ *     struct my_fq *myfq = (struct my_fq *)fq;
-+ *     do_something_with(myfq->an_extra_field);
-+ *     [...]
-+ *
-+ * (b) when and if configuring the FQ for context stashing, specify how ever
-+ *     many cachelines are required to stash 'struct my_fq', to accelerate not
-+ *     only the Qman driver but the callback as well.
-+ */
-+
-+struct qman_fq_cb {
-+	qman_cb_dqrr dqrr;      /* for dequeued frames */
-+	qman_cb_mr ern;         /* for s/w ERNs */
-+	qman_cb_mr fqs;         /* frame-queue state changes*/
-+};
-+
-+struct qman_fq {
-+	/* Caller of qman_create_fq() provides these demux callbacks */
-+	struct qman_fq_cb cb;
-+	/* These are internal to the driver, don't touch. In particular, they
-+	 * may change, be removed, or extended (so you shouldn't rely on
-+	 * sizeof(qman_fq) being a constant). */
-+	spinlock_t fqlock;
-+	u32 fqid;
-+	volatile unsigned long flags;
-+	enum qman_fq_state state;
-+	int cgr_groupid;
-+	struct rb_node node;
-+#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
-+	u32 key;
-+#endif
-+};
-+
-+/* This callback type is used when handling congestion group entry/exit.
-+ * 'congested' is non-zero on congestion-entry, and zero on congestion-exit. */
-+typedef void (*qman_cb_cgr)(struct qman_portal *qm,
-+			struct qman_cgr *cgr, int congested);
-+
-+struct qman_cgr {
-+	/* Set these prior to qman_create_cgr() */
-+	u32 cgrid; /* 0..255, but u32 to allow specials like -1, 256, etc.*/
-+	qman_cb_cgr cb;
-+	/* These are private to the driver */
-+	u16 chan; /* portal channel this object is created on */
-+	struct list_head node;
-+};
-+
-+/* Flags to qman_create_fq() */
-+#define QMAN_FQ_FLAG_NO_ENQUEUE      0x00000001 /* can't enqueue */
-+#define QMAN_FQ_FLAG_NO_MODIFY       0x00000002 /* can only enqueue */
-+#define QMAN_FQ_FLAG_TO_DCPORTAL     0x00000004 /* consumed by CAAM/PME/Fman */
-+#define QMAN_FQ_FLAG_LOCKED          0x00000008 /* multi-core locking */
-+#define QMAN_FQ_FLAG_AS_IS           0x00000010 /* query h/w state */
-+#define QMAN_FQ_FLAG_DYNAMIC_FQID    0x00000020 /* (de)allocate fqid */
-+
-+/* Flags to qman_destroy_fq() */
-+#define QMAN_FQ_DESTROY_PARKED       0x00000001 /* FQ can be parked or OOS */
-+
-+/* Flags from qman_fq_state() */
-+#define QMAN_FQ_STATE_CHANGING       0x80000000 /* 'state' is changing */
-+#define QMAN_FQ_STATE_NE             0x40000000 /* retired FQ isn't empty */
-+#define QMAN_FQ_STATE_ORL            0x20000000 /* retired FQ has ORL */
-+#define QMAN_FQ_STATE_BLOCKOOS       0xe0000000 /* if any are set, no OOS */
-+#define QMAN_FQ_STATE_CGR_EN         0x10000000 /* CGR enabled */
-+#define QMAN_FQ_STATE_VDQCR          0x08000000 /* being volatile dequeued */
-+
-+/* Flags to qman_init_fq() */
-+#define QMAN_INITFQ_FLAG_SCHED       0x00000001 /* schedule rather than park */
-+#define QMAN_INITFQ_FLAG_LOCAL       0x00000004 /* set dest portal */
-+
-+/* Flags to qman_volatile_dequeue() */
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+#define QMAN_VOLATILE_FLAG_WAIT      0x00000001 /* wait if VDQCR is in use */
-+#define QMAN_VOLATILE_FLAG_WAIT_INT  0x00000002 /* if wait, interruptible? */
-+#define QMAN_VOLATILE_FLAG_FINISH    0x00000004 /* wait till VDQCR completes */
-+#endif
-+
-+/* Flags to qman_enqueue(). NB, the strange numbering is to align with hardware,
-+ * bit-wise. (NB: the PME API is sensitive to these precise numberings too, so
-+ * any change here should be audited in PME.) */
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT
-+#define QMAN_ENQUEUE_FLAG_WAIT       0x00010000 /* wait if EQCR is full */
-+#define QMAN_ENQUEUE_FLAG_WAIT_INT   0x00020000 /* if wait, interruptible? */
-+#ifdef CONFIG_FSL_DPA_CAN_WAIT_SYNC
-+#define QMAN_ENQUEUE_FLAG_WAIT_SYNC  0x00000004 /* if wait, until consumed? */
-+#endif
-+#endif
-+#define QMAN_ENQUEUE_FLAG_WATCH_CGR  0x00080000 /* watch congestion state */
-+#define QMAN_ENQUEUE_FLAG_DCA        0x00008000 /* perform enqueue-DCA */
-+#define QMAN_ENQUEUE_FLAG_DCA_PARK   0x00004000 /* If DCA, requests park */
-+#define QMAN_ENQUEUE_FLAG_DCA_PTR(p)		/* If DCA, p is DQRR entry */ \
-+		(((u32)(p) << 2) & 0x00000f00)
-+#define QMAN_ENQUEUE_FLAG_C_GREEN    0x00000000 /* choose one C_*** flag */
-+#define QMAN_ENQUEUE_FLAG_C_YELLOW   0x00000008
-+#define QMAN_ENQUEUE_FLAG_C_RED      0x00000010
-+#define QMAN_ENQUEUE_FLAG_C_OVERRIDE 0x00000018
-+/* For the ORP-specific qman_enqueue_orp() variant;
-+ * - this flag indicates "Not Last In Sequence", ie. all but the final fragment
-+ *   of a frame. */
-+#define QMAN_ENQUEUE_FLAG_NLIS       0x01000000
-+/* - this flag performs no enqueue but fills in an ORP sequence number that
-+ *   would otherwise block it (eg. if a frame has been dropped). */
-+#define QMAN_ENQUEUE_FLAG_HOLE       0x02000000
-+/* - this flag performs no enqueue but advances NESN to the given sequence
-+ *   number. */
-+#define QMAN_ENQUEUE_FLAG_NESN       0x04000000
-+
-+/* Flags to qman_modify_cgr() */
-+#define QMAN_CGR_FLAG_USE_INIT       0x00000001
-+#define QMAN_CGR_MODE_FRAME          0x00000001
-+
-+	/* Portal Management */
-+	/* ----------------- */
-+/**
-+ * qman_get_portal_config - get portal configuration settings
-+ *
-+ * This returns a read-only view of the current cpu's affine portal settings.
-+ */
-+const struct qman_portal_config *qman_get_portal_config(void);
-+
-+/**
-+ * qman_irqsource_get - return the portal work that is interrupt-driven
-+ *
-+ * Returns a bitmask of QM_PIRQ_**I processing sources that are currently
-+ * enabled for interrupt handling on the current cpu's affine portal. These
-+ * sources will trigger the portal interrupt and the interrupt handler (or a
-+ * tasklet/bottom-half it defers to) will perform the corresponding processing
-+ * work. The qman_poll_***() functions will only process sources that are not in
-+ * this bitmask. If the current CPU is sharing a portal hosted on another CPU,
-+ * this always returns zero.
-+ */
-+u32 qman_irqsource_get(void);
-+
-+/**
-+ * qman_irqsource_add - add processing sources to be interrupt-driven
-+ * @bits: bitmask of QM_PIRQ_**I processing sources
-+ *
-+ * Adds processing sources that should be interrupt-driven (rather than
-+ * processed via qman_poll_***() functions). Returns zero for success, or
-+ * -EINVAL if the current CPU is sharing a portal hosted on another CPU.
-+ */
-+int qman_irqsource_add(u32 bits);
-+
-+/**
-+ * qman_irqsource_remove - remove processing sources from being interrupt-driven
-+ * @bits: bitmask of QM_PIRQ_**I processing sources
-+ *
-+ * Removes processing sources from being interrupt-driven, so that they will
-+ * instead be processed via qman_poll_***() functions. Returns zero for success,
-+ * or -EINVAL if the current CPU is sharing a portal hosted on another CPU.
-+ */
-+int qman_irqsource_remove(u32 bits);
-+
-+/**
-+ * qman_affine_cpus - return a mask of cpus that have affine portals
-+ */
-+const cpumask_t *qman_affine_cpus(void);
-+
-+/**
-+ * qman_affine_channel - return the channel ID of an portal
-+ * @cpu: the cpu whose affine portal is the subject of the query
-+ *
-+ * If @cpu is -1, the affine portal for the current CPU will be used. It is a
-+ * bug to call this function for any value of @cpu (other than -1) that is not a
-+ * member of the mask returned from qman_affine_cpus().
-+ */
-+u16 qman_affine_channel(int cpu);
-+
-+/**
-+ * qman_get_affine_portal - return the portal pointer affine to cpu
-+ * @cpu: the cpu whose affine portal is the subject of the query
-+ *
-+ */
-+void *qman_get_affine_portal(int cpu);
-+
-+/**
-+ * qman_poll_dqrr - process DQRR (fast-path) entries
-+ * @limit: the maximum number of DQRR entries to process
-+ *
-+ * Use of this function requires that DQRR processing not be interrupt-driven.
-+ * Ie. the value returned by qman_irqsource_get() should not include
-+ * QM_PIRQ_DQRI. If the current CPU is sharing a portal hosted on another CPU,
-+ * this function will return -EINVAL, otherwise the return value is >=0 and
-+ * represents the number of DQRR entries processed.
-+ */
-+int qman_poll_dqrr(unsigned int limit);
-+
-+/**
-+ * qman_poll_slow - process anything (except DQRR) that isn't interrupt-driven.
-+ *
-+ * This function does any portal processing that isn't interrupt-driven. If the
-+ * current CPU is sharing a portal hosted on another CPU, this function will
-+ * return (u32)-1, otherwise the return value is a bitmask of QM_PIRQ_* sources
-+ * indicating what interrupt sources were actually processed by the call.
-+ */
-+u32 qman_poll_slow(void);
-+
-+/**
-+ * qman_poll - legacy wrapper for qman_poll_dqrr() and qman_poll_slow()
-+ *
-+ * Dispatcher logic on a cpu can use this to trigger any maintenance of the
-+ * affine portal. There are two classes of portal processing in question;
-+ * fast-path (which involves demuxing dequeue ring (DQRR) entries and tracking
-+ * enqueue ring (EQCR) consumption), and slow-path (which involves EQCR
-+ * thresholds, congestion state changes, etc). This function does whatever
-+ * processing is not triggered by interrupts.
-+ *
-+ * Note, if DQRR and some slow-path processing are poll-driven (rather than
-+ * interrupt-driven) then this function uses a heuristic to determine how often
-+ * to run slow-path processing - as slow-path processing introduces at least a
-+ * minimum latency each time it is run, whereas fast-path (DQRR) processing is
-+ * close to zero-cost if there is no work to be done. Applications can tune this
-+ * behaviour themselves by using qman_poll_dqrr() and qman_poll_slow() directly
-+ * rather than going via this wrapper.
-+ */
-+void qman_poll(void);
-+
-+/**
-+ * qman_stop_dequeues - Stop h/w dequeuing to the s/w portal
-+ *
-+ * Disables DQRR processing of the portal. This is reference-counted, so
-+ * qman_start_dequeues() must be called as many times as qman_stop_dequeues() to
-+ * truly re-enable dequeuing.
-+ */
-+void qman_stop_dequeues(void);
-+
-+/**
-+ * qman_start_dequeues - (Re)start h/w dequeuing to the s/w portal
-+ *
-+ * Enables DQRR processing of the portal. This is reference-counted, so
-+ * qman_start_dequeues() must be called as many times as qman_stop_dequeues() to
-+ * truly re-enable dequeuing.
-+ */
-+void qman_start_dequeues(void);
-+
-+/**
-+ * qman_static_dequeue_add - Add pool channels to the portal SDQCR
-+ * @pools: bit-mask of pool channels, using QM_SDQCR_CHANNELS_POOL(n)
-+ *
-+ * Adds a set of pool channels to the portal's static dequeue command register
-+ * (SDQCR). The requested pools are limited to those the portal has dequeue
-+ * access to.
-+ */
-+void qman_static_dequeue_add(u32 pools);
-+
-+/**
-+ * qman_static_dequeue_del - Remove pool channels from the portal SDQCR
-+ * @pools: bit-mask of pool channels, using QM_SDQCR_CHANNELS_POOL(n)
-+ *
-+ * Removes a set of pool channels from the portal's static dequeue command
-+ * register (SDQCR). The requested pools are limited to those the portal has
-+ * dequeue access to.
-+ */
-+void qman_static_dequeue_del(u32 pools);
-+
-+/**
-+ * qman_static_dequeue_get - return the portal's current SDQCR
-+ *
-+ * Returns the portal's current static dequeue command register (SDQCR). The
-+ * entire register is returned, so if only the currently-enabled pool channels
-+ * are desired, mask the return value with QM_SDQCR_CHANNELS_POOL_MASK.
-+ */
-+u32 qman_static_dequeue_get(void);
-+
-+/**
-+ * qman_dca - Perform a Discrete Consumption Acknowledgement
-+ * @dq: the DQRR entry to be consumed
-+ * @park_request: indicates whether the held-active @fq should be parked
-+ *
-+ * Only allowed in DCA-mode portals, for DQRR entries whose handler callback had
-+ * previously returned 'qman_cb_dqrr_defer'. NB, as with the other APIs, this
-+ * does not take a 'portal' argument but implies the core affine portal from the
-+ * cpu that is currently executing the function. For reasons of locking, this
-+ * function must be called from the same CPU as that which processed the DQRR
-+ * entry in the first place.
-+ */
-+void qman_dca(struct qm_dqrr_entry *dq, int park_request);
-+
-+/**
-+ * qman_eqcr_is_empty - Determine if portal's EQCR is empty
-+ *
-+ * For use in situations where a cpu-affine caller needs to determine when all
-+ * enqueues for the local portal have been processed by Qman but can't use the
-+ * QMAN_ENQUEUE_FLAG_WAIT_SYNC flag to do this from the final qman_enqueue().
-+ * The function forces tracking of EQCR consumption (which normally doesn't
-+ * happen until enqueue processing needs to find space to put new enqueue
-+ * commands), and returns zero if the ring still has unprocessed entries,
-+ * non-zero if it is empty.
-+ */
-+int qman_eqcr_is_empty(void);
-+
-+/**
-+ * qman_set_dc_ern - Set the handler for DCP enqueue rejection notifications
-+ * @handler: callback for processing DCP ERNs
-+ * @affine: whether this handler is specific to the locally affine portal
-+ *
-+ * If a hardware block's interface to Qman (ie. its direct-connect portal, or
-+ * DCP) is configured not to receive enqueue rejections, then any enqueues
-+ * through that DCP that are rejected will be sent to a given software portal.
-+ * If @affine is non-zero, then this handler will only be used for DCP ERNs
-+ * received on the portal affine to the current CPU. If multiple CPUs share a
-+ * portal and they all call this function, they will be setting the handler for
-+ * the same portal! If @affine is zero, then this handler will be global to all
-+ * portals handled by this instance of the driver. Only those portals that do
-+ * not have their own affine handler will use the global handler.
-+ */
-+void qman_set_dc_ern(qman_cb_dc_ern handler, int affine);
-+
-+	/* FQ management */
-+	/* ------------- */
-+/**
-+ * qman_create_fq - Allocates a FQ
-+ * @fqid: the index of the FQD to encapsulate, must be "Out of Service"
-+ * @flags: bit-mask of QMAN_FQ_FLAG_*** options
-+ * @fq: memory for storing the 'fq', with callbacks filled in
-+ *
-+ * Creates a frame queue object for the given @fqid, unless the
-+ * QMAN_FQ_FLAG_DYNAMIC_FQID flag is set in @flags, in which case a FQID is
-+ * dynamically allocated (or the function fails if none are available). Once
-+ * created, the caller should not touch the memory at 'fq' except as extended to
-+ * adjacent memory for user-defined fields (see the definition of "struct
-+ * qman_fq" for more info). NO_MODIFY is only intended for enqueuing to
-+ * pre-existing frame-queues that aren't to be otherwise interfered with, it
-+ * prevents all other modifications to the frame queue. The TO_DCPORTAL flag
-+ * causes the driver to honour any contextB modifications requested in the
-+ * qm_init_fq() API, as this indicates the frame queue will be consumed by a
-+ * direct-connect portal (PME, CAAM, or Fman). When frame queues are consumed by
-+ * software portals, the contextB field is controlled by the driver and can't be
-+ * modified by the caller. If the AS_IS flag is specified, management commands
-+ * will be used on portal @p to query state for frame queue @fqid and construct
-+ * a frame queue object based on that, rather than assuming/requiring that it be
-+ * Out of Service.
-+ */
-+int qman_create_fq(u32 fqid, u32 flags, struct qman_fq *fq);
-+
-+/**
-+ * qman_destroy_fq - Deallocates a FQ
-+ * @fq: the frame queue object to release
-+ * @flags: bit-mask of QMAN_FQ_FREE_*** options
-+ *
-+ * The memory for this frame queue object ('fq' provided in qman_create_fq()) is
-+ * not deallocated but the caller regains ownership, to do with as desired. The
-+ * FQ must be in the 'out-of-service' state unless the QMAN_FQ_FREE_PARKED flag
-+ * is specified, in which case it may also be in the 'parked' state.
-+ */
-+void qman_destroy_fq(struct qman_fq *fq, u32 flags);
-+
-+/**
-+ * qman_fq_fqid - Queries the frame queue ID of a FQ object
-+ * @fq: the frame queue object to query
-+ */
-+u32 qman_fq_fqid(struct qman_fq *fq);
-+
-+/**
-+ * qman_fq_state - Queries the state of a FQ object
-+ * @fq: the frame queue object to query
-+ * @state: pointer to state enum to return the FQ scheduling state
-+ * @flags: pointer to state flags to receive QMAN_FQ_STATE_*** bitmask
-+ *
-+ * Queries the state of the FQ object, without performing any h/w commands.
-+ * This captures the state, as seen by the driver, at the time the function
-+ * executes.
-+ */
-+void qman_fq_state(struct qman_fq *fq, enum qman_fq_state *state, u32 *flags);
-+
-+/**
-+ * qman_init_fq - Initialises FQ fields, leaves the FQ "parked" or "scheduled"
-+ * @fq: the frame queue object to modify, must be 'parked' or new.
-+ * @flags: bit-mask of QMAN_INITFQ_FLAG_*** options
-+ * @opts: the FQ-modification settings, as defined in the low-level API
-+ *
-+ * The @opts parameter comes from the low-level portal API. Select
-+ * QMAN_INITFQ_FLAG_SCHED in @flags to cause the frame queue to be scheduled
-+ * rather than parked. NB, @opts can be NULL.
-+ *
-+ * Note that some fields and options within @opts may be ignored or overwritten
-+ * by the driver;
-+ * 1. the 'count' and 'fqid' fields are always ignored (this operation only
-+ * affects one frame queue: @fq).
-+ * 2. the QM_INITFQ_WE_CONTEXTB option of the 'we_mask' field and the associated
-+ * 'fqd' structure's 'context_b' field are sometimes overwritten;
-+ *   - if @fq was not created with QMAN_FQ_FLAG_TO_DCPORTAL, then context_b is
-+ *     initialised to a value used by the driver for demux.
-+ *   - if context_b is initialised for demux, so is context_a in case stashing
-+ *     is requested (see item 4).
-+ * (So caller control of context_b is only possible for TO_DCPORTAL frame queue
-+ * objects.)
-+ * 3. if @flags contains QMAN_INITFQ_FLAG_LOCAL, the 'fqd' structure's
-+ * 'dest::channel' field will be overwritten to match the portal used to issue
-+ * the command. If the WE_DESTWQ write-enable bit had already been set by the
-+ * caller, the channel workqueue will be left as-is, otherwise the write-enable
-+ * bit is set and the workqueue is set to a default of 4. If the "LOCAL" flag
-+ * isn't set, the destination channel/workqueue fields and the write-enable bit
-+ * are left as-is.
-+ * 4. if the driver overwrites context_a/b for demux, then if
-+ * QM_INITFQ_WE_CONTEXTA is set, the driver will only overwrite
-+ * context_a.address fields and will leave the stashing fields provided by the
-+ * user alone, otherwise it will zero out the context_a.stashing fields.
-+ */
-+int qman_init_fq(struct qman_fq *fq, u32 flags, struct qm_mcc_initfq *opts);
-+
-+/**
-+ * qman_schedule_fq - Schedules a FQ
-+ * @fq: the frame queue object to schedule, must be 'parked'
-+ *
-+ * Schedules the frame queue, which must be Parked, which takes it to
-+ * Tentatively-Scheduled or Truly-Scheduled depending on its fill-level.
-+ */
-+int qman_schedule_fq(struct qman_fq *fq);
-+
-+/**
-+ * qman_retire_fq - Retires a FQ
-+ * @fq: the frame queue object to retire
-+ * @flags: FQ flags (as per qman_fq_state) if retirement completes immediately
-+ *
-+ * Retires the frame queue. This returns zero if it succeeds immediately, +1 if
-+ * the retirement was started asynchronously, otherwise it returns negative for
-+ * failure. When this function returns zero, @flags is set to indicate whether
-+ * the retired FQ is empty and/or whether it has any ORL fragments (to show up
-+ * as ERNs). Otherwise the corresponding flags will be known when a subsequent
-+ * FQRN message shows up on the portal's message ring.
-+ *
-+ * NB, if the retirement is asynchronous (the FQ was in the Truly Scheduled or
-+ * Active state), the completion will be via the message ring as a FQRN - but
-+ * the corresponding callback may occur before this function returns!! Ie. the
-+ * caller should be prepared to accept the callback as the function is called,
-+ * not only once it has returned.
-+ */
-+int qman_retire_fq(struct qman_fq *fq, u32 *flags);
-+
-+/**
-+ * qman_oos_fq - Puts a FQ "out of service"
-+ * @fq: the frame queue object to be put out-of-service, must be 'retired'
-+ *
-+ * The frame queue must be retired and empty, and if any order restoration list
-+ * was released as ERNs at the time of retirement, they must all be consumed.
-+ */
-+int qman_oos_fq(struct qman_fq *fq);
-+
-+/**
-+ * qman_fq_flow_control - Set the XON/XOFF state of a FQ
-+ * @fq: the frame queue object to be set to XON/XOFF state, must not be 'oos',
-+ * or 'retired' or 'parked' state
-+ * @xon: boolean to set fq in XON or XOFF state
-+ *
-+ * The frame should be in Tentatively Scheduled state or Truly Schedule sate,
-+ * otherwise the IFSI interrupt will be asserted.
-+ */
-+int qman_fq_flow_control(struct qman_fq *fq, int xon);
-+
-+/**
-+ * qman_query_fq - Queries FQD fields (via h/w query command)
-+ * @fq: the frame queue object to be queried
-+ * @fqd: storage for the queried FQD fields
-+ */
-+int qman_query_fq(struct qman_fq *fq, struct qm_fqd *fqd);
-+
-+/**
-+ * qman_query_fq_np - Queries non-programmable FQD fields
-+ * @fq: the frame queue object to be queried
-+ * @np: storage for the queried FQD fields
-+ */
-+int qman_query_fq_np(struct qman_fq *fq, struct qm_mcr_queryfq_np *np);
-+
-+/**
-+ * qman_query_wq - Queries work queue lengths
-+ * @query_dedicated: If non-zero, query length of WQs in the channel dedicated
-+ *		to this software portal. Otherwise, query length of WQs in a
-+ *		channel  specified in wq.
-+ * @wq: storage for the queried WQs lengths. Also specified the channel to
-+ *	to query if query_dedicated is zero.
-+ */
-+int qman_query_wq(u8 query_dedicated, struct qm_mcr_querywq *wq);
-+
-+/**
-+ * qman_volatile_dequeue - Issue a volatile dequeue command
-+ * @fq: the frame queue object to dequeue from
-+ * @flags: a bit-mask of QMAN_VOLATILE_FLAG_*** options
-+ * @vdqcr: bit mask of QM_VDQCR_*** options, as per qm_dqrr_vdqcr_set()
-+ *
-+ * Attempts to lock access to the portal's VDQCR volatile dequeue functionality.
-+ * The function will block and sleep if QMAN_VOLATILE_FLAG_WAIT is specified and
-+ * the VDQCR is already in use, otherwise returns non-zero for failure. If
-+ * QMAN_VOLATILE_FLAG_FINISH is specified, the function will only return once
-+ * the VDQCR command has finished executing (ie. once the callback for the last
-+ * DQRR entry resulting from the VDQCR command has been called). If not using
-+ * the FINISH flag, completion can be determined either by detecting the
-+ * presence of the QM_DQRR_STAT_UNSCHEDULED and QM_DQRR_STAT_DQCR_EXPIRED bits
-+ * in the "stat" field of the "struct qm_dqrr_entry" passed to the FQ's dequeue
-+ * callback, or by waiting for the QMAN_FQ_STATE_VDQCR bit to disappear from the
-+ * "flags" retrieved from qman_fq_state().
-+ */
-+int qman_volatile_dequeue(struct qman_fq *fq, u32 flags, u32 vdqcr);
-+
-+/**
-+ * qman_enqueue - Enqueue a frame to a frame queue
-+ * @fq: the frame queue object to enqueue to
-+ * @fd: a descriptor of the frame to be enqueued
-+ * @flags: bit-mask of QMAN_ENQUEUE_FLAG_*** options
-+ *
-+ * Fills an entry in the EQCR of portal @qm to enqueue the frame described by
-+ * @fd. The descriptor details are copied from @fd to the EQCR entry, the 'pid'
-+ * field is ignored. The return value is non-zero on error, such as ring full
-+ * (and FLAG_WAIT not specified), congestion avoidance (FLAG_WATCH_CGR
-+ * specified), etc. If the ring is full and FLAG_WAIT is specified, this
-+ * function will block. If FLAG_INTERRUPT is set, the EQCI bit of the portal
-+ * interrupt will assert when Qman consumes the EQCR entry (subject to "status
-+ * disable", "enable", and "inhibit" registers). If FLAG_DCA is set, Qman will
-+ * perform an implied "discrete consumption acknowledgement" on the dequeue
-+ * ring's (DQRR) entry, at the ring index specified by the FLAG_DCA_IDX(x)
-+ * macro. (As an alternative to issuing explicit DCA actions on DQRR entries,
-+ * this implicit DCA can delay the release of a "held active" frame queue
-+ * corresponding to a DQRR entry until Qman consumes the EQCR entry - providing
-+ * order-preservation semantics in packet-forwarding scenarios.) If FLAG_DCA is
-+ * set, then FLAG_DCA_PARK can also be set to imply that the DQRR consumption
-+ * acknowledgement should "park request" the "held active" frame queue. Ie.
-+ * when the portal eventually releases that frame queue, it will be left in the
-+ * Parked state rather than Tentatively Scheduled or Truly Scheduled. If the
-+ * portal is watching congestion groups, the QMAN_ENQUEUE_FLAG_WATCH_CGR flag
-+ * is requested, and the FQ is a member of a congestion group, then this
-+ * function returns -EAGAIN if the congestion group is currently congested.
-+ * Note, this does not eliminate ERNs, as the async interface means we can be
-+ * sending enqueue commands to an un-congested FQ that becomes congested before
-+ * the enqueue commands are processed, but it does minimise needless thrashing
-+ * of an already busy hardware resource by throttling many of the to-be-dropped
-+ * enqueues "at the source".
-+ */
-+int qman_enqueue(struct qman_fq *fq, const struct qm_fd *fd, u32 flags);
-+
-+typedef int (*qman_cb_precommit) (void *arg);
-+/**
-+ * qman_enqueue_precommit - Enqueue a frame to a frame queue and call cb
-+ * @fq: the frame queue object to enqueue to
-+ * @fd: a descriptor of the frame to be enqueued
-+ * @flags: bit-mask of QMAN_ENQUEUE_FLAG_*** options
-+ * @cb: user supplied callback function to invoke before writing commit verb.
-+ * @cb_arg: callback function argument
-+ *
-+ * This is similar to qman_enqueue except that it will invoke a user supplied
-+ * callback function just before writng the commit verb. This is useful
-+ * when the user want to do something *just before* enqueuing the request and
-+ * the enqueue can't fail.
-+ */
-+int qman_enqueue_precommit(struct qman_fq *fq, const struct qm_fd *fd,
-+		u32 flags, qman_cb_precommit cb, void *cb_arg);
-+
-+/**
-+ * qman_enqueue_orp - Enqueue a frame to a frame queue using an ORP
-+ * @fq: the frame queue object to enqueue to
-+ * @fd: a descriptor of the frame to be enqueued
-+ * @flags: bit-mask of QMAN_ENQUEUE_FLAG_*** options
-+ * @orp: the frame queue object used as an order restoration point.
-+ * @orp_seqnum: the sequence number of this frame in the order restoration path
-+ *
-+ * Similar to qman_enqueue(), but with the addition of an Order Restoration
-+ * Point (@orp) and corresponding sequence number (@orp_seqnum) for this
-+ * enqueue operation to employ order restoration. Each frame queue object acts
-+ * as an Order Definition Point (ODP) by providing each frame dequeued from it
-+ * with an incrementing sequence number, this value is generally ignored unless
-+ * that sequence of dequeued frames will need order restoration later. Each
-+ * frame queue object also encapsulates an Order Restoration Point (ORP), which
-+ * is a re-assembly context for re-ordering frames relative to their sequence
-+ * numbers as they are enqueued. The ORP does not have to be within the frame
-+ * queue that receives the enqueued frame, in fact it is usually the frame
-+ * queue from which the frames were originally dequeued. For the purposes of
-+ * order restoration, multiple frames (or "fragments") can be enqueued for a
-+ * single sequence number by setting the QMAN_ENQUEUE_FLAG_NLIS flag for all
-+ * enqueues except the final fragment of a given sequence number. Ordering
-+ * between sequence numbers is guaranteed, even if fragments of different
-+ * sequence numbers are interlaced with one another. Fragments of the same
-+ * sequence number will retain the order in which they are enqueued. If no
-+ * enqueue is to performed, QMAN_ENQUEUE_FLAG_HOLE indicates that the given
-+ * sequence number is to be "skipped" by the ORP logic (eg. if a frame has been
-+ * dropped from a sequence), or QMAN_ENQUEUE_FLAG_NESN indicates that the given
-+ * sequence number should become the ORP's "Next Expected Sequence Number".
-+ *
-+ * Side note: a frame queue object can be used purely as an ORP, without
-+ * carrying any frames at all. Care should be taken not to deallocate a frame
-+ * queue object that is being actively used as an ORP, as a future allocation
-+ * of the frame queue object may start using the internal ORP before the
-+ * previous use has finished.
-+ */
-+int qman_enqueue_orp(struct qman_fq *fq, const struct qm_fd *fd, u32 flags,
-+			struct qman_fq *orp, u16 orp_seqnum);
-+
-+/**
-+ * qman_alloc_fqid_range - Allocate a contiguous range of FQIDs
-+ * @result: is set by the API to the base FQID of the allocated range
-+ * @count: the number of FQIDs required
-+ * @align: required alignment of the allocated range
-+ * @partial: non-zero if the API can return fewer than @count FQIDs
-+ *
-+ * Returns the number of frame queues allocated, or a negative error code. If
-+ * @partial is non zero, the allocation request may return a smaller range of
-+ * FQs than requested (though alignment will be as requested). If @partial is
-+ * zero, the return value will either be 'count' or negative.
-+ */
-+int qman_alloc_fqid_range(u32 *result, u32 count, u32 align, int partial);
-+static inline int qman_alloc_fqid(u32 *result)
-+{
-+	int ret = qman_alloc_fqid_range(result, 1, 0, 0);
-+	return (ret > 0) ? 0 : ret;
-+}
-+
-+/**
-+ * qman_release_fqid_range - Release the specified range of frame queue IDs
-+ * @fqid: the base FQID of the range to deallocate
-+ * @count: the number of FQIDs in the range
-+ *
-+ * This function can also be used to seed the allocator with ranges of FQIDs
-+ * that it can subsequently allocate from.
-+ */
-+void qman_release_fqid_range(u32 fqid, unsigned int count);
-+static inline void qman_release_fqid(u32 fqid)
-+{
-+	qman_release_fqid_range(fqid, 1);
-+}
-+
-+void qman_seed_fqid_range(u32 fqid, unsigned int count);
-+
-+
-+int qman_shutdown_fq(u32 fqid);
-+
-+/**
-+ * qman_reserve_fqid_range - Reserve the specified range of frame queue IDs
-+ * @fqid: the base FQID of the range to deallocate
-+ * @count: the number of FQIDs in the range
-+ */
-+int qman_reserve_fqid_range(u32 fqid, unsigned int count);
-+static inline int qman_reserve_fqid(u32 fqid)
-+{
-+	return qman_reserve_fqid_range(fqid, 1);
-+}
-+
-+	/* Pool-channel management */
-+	/* ----------------------- */
-+/**
-+ * qman_alloc_pool_range - Allocate a contiguous range of pool-channel IDs
-+ * @result: is set by the API to the base pool-channel ID of the allocated range
-+ * @count: the number of pool-channel IDs required
-+ * @align: required alignment of the allocated range
-+ * @partial: non-zero if the API can return fewer than @count
-+ *
-+ * Returns the number of pool-channel IDs allocated, or a negative error code.
-+ * If @partial is non zero, the allocation request may return a smaller range of
-+ * than requested (though alignment will be as requested). If @partial is zero,
-+ * the return value will either be 'count' or negative.
-+ */
-+int qman_alloc_pool_range(u32 *result, u32 count, u32 align, int partial);
-+static inline int qman_alloc_pool(u32 *result)
-+{
-+	int ret = qman_alloc_pool_range(result, 1, 0, 0);
-+	return (ret > 0) ? 0 : ret;
-+}
-+
-+/**
-+ * qman_release_pool_range - Release the specified range of pool-channel IDs
-+ * @id: the base pool-channel ID of the range to deallocate
-+ * @count: the number of pool-channel IDs in the range
-+ */
-+void qman_release_pool_range(u32 id, unsigned int count);
-+static inline void qman_release_pool(u32 id)
-+{
-+	qman_release_pool_range(id, 1);
-+}
-+
-+/**
-+ * qman_reserve_pool_range - Reserve the specified range of pool-channel IDs
-+ * @id: the base pool-channel ID of the range to reserve
-+ * @count: the number of pool-channel IDs in the range
-+ */
-+int qman_reserve_pool_range(u32 id, unsigned int count);
-+static inline int qman_reserve_pool(u32 id)
-+{
-+	return qman_reserve_pool_range(id, 1);
-+}
-+
-+void qman_seed_pool_range(u32 id, unsigned int count);
-+
-+	/* CGR management */
-+	/* -------------- */
-+/**
-+ * qman_create_cgr - Register a congestion group object
-+ * @cgr: the 'cgr' object, with fields filled in
-+ * @flags: QMAN_CGR_FLAG_* values
-+ * @opts: optional state of CGR settings
-+ *
-+ * Registers this object to receiving congestion entry/exit callbacks on the
-+ * portal affine to the cpu portal on which this API is executed. If opts is
-+ * NULL then only the callback (cgr->cb) function is registered. If @flags
-+ * contains QMAN_CGR_FLAG_USE_INIT, then an init hw command (which will reset
-+ * any unspecified parameters) will be used rather than a modify hw hardware
-+ * (which only modifies the specified parameters).
-+ */
-+int qman_create_cgr(struct qman_cgr *cgr, u32 flags,
-+			struct qm_mcc_initcgr *opts);
-+
-+/**
-+ * qman_create_cgr_to_dcp - Register a congestion group object to DCP portal
-+ * @cgr: the 'cgr' object, with fields filled in
-+ * @flags: QMAN_CGR_FLAG_* values
-+ * @dcp_portal: the DCP portal to which the cgr object is registered.
-+ * @opts: optional state of CGR settings
-+ *
-+ */
-+int qman_create_cgr_to_dcp(struct qman_cgr *cgr, u32 flags, u16 dcp_portal,
-+				struct qm_mcc_initcgr *opts);
-+
-+/**
-+ * qman_delete_cgr - Deregisters a congestion group object
-+ * @cgr: the 'cgr' object to deregister
-+ *
-+ * "Unplugs" this CGR object from the portal affine to the cpu on which this API
-+ * is executed. This must be excuted on the same affine portal on which it was
-+ * created.
-+ */
-+int qman_delete_cgr(struct qman_cgr *cgr);
-+
-+/**
-+ * qman_delete_cgr_safe - Deregisters a congestion group object from any CPU
-+ * @cgr: the 'cgr' object to deregister
-+ *
-+ * This will select the proper CPU and run there qman_delete_cgr().
-+ */
-+void qman_delete_cgr_safe(struct qman_cgr *cgr);
-+
-+/**
-+ * qman_modify_cgr - Modify CGR fields
-+ * @cgr: the 'cgr' object to modify
-+ * @flags: QMAN_CGR_FLAG_* values
-+ * @opts: the CGR-modification settings
-+ *
-+ * The @opts parameter comes from the low-level portal API, and can be NULL.
-+ * Note that some fields and options within @opts may be ignored or overwritten
-+ * by the driver, in particular the 'cgrid' field is ignored (this operation
-+ * only affects the given CGR object). If @flags contains
-+ * QMAN_CGR_FLAG_USE_INIT, then an init hw command (which will reset any
-+ * unspecified parameters) will be used rather than a modify hw hardware (which
-+ * only modifies the specified parameters).
-+ */
-+int qman_modify_cgr(struct qman_cgr *cgr, u32 flags,
-+			struct qm_mcc_initcgr *opts);
-+
-+/**
-+* qman_query_cgr - Queries CGR fields
-+* @cgr: the 'cgr' object to query
-+* @result: storage for the queried congestion group record
-+*/
-+int qman_query_cgr(struct qman_cgr *cgr, struct qm_mcr_querycgr *result);
-+
-+/**
-+ * qman_query_congestion - Queries the state of all congestion groups
-+ * @congestion: storage for the queried state of all congestion groups
-+ */
-+int qman_query_congestion(struct qm_mcr_querycongestion *congestion);
-+
-+/**
-+ * qman_alloc_cgrid_range - Allocate a contiguous range of CGR IDs
-+ * @result: is set by the API to the base CGR ID of the allocated range
-+ * @count: the number of CGR IDs required
-+ * @align: required alignment of the allocated range
-+ * @partial: non-zero if the API can return fewer than @count
-+ *
-+ * Returns the number of CGR IDs allocated, or a negative error code.
-+ * If @partial is non zero, the allocation request may return a smaller range of
-+ * than requested (though alignment will be as requested). If @partial is zero,
-+ * the return value will either be 'count' or negative.
-+ */
-+int qman_alloc_cgrid_range(u32 *result, u32 count, u32 align, int partial);
-+static inline int qman_alloc_cgrid(u32 *result)
-+{
-+	int ret = qman_alloc_cgrid_range(result, 1, 0, 0);
-+	return (ret > 0) ? 0 : ret;
-+}
-+
-+/**
-+ * qman_release_cgrid_range - Release the specified range of CGR IDs
-+ * @id: the base CGR ID of the range to deallocate
-+ * @count: the number of CGR IDs in the range
-+ */
-+void qman_release_cgrid_range(u32 id, unsigned int count);
-+static inline void qman_release_cgrid(u32 id)
-+{
-+	qman_release_cgrid_range(id, 1);
-+}
-+
-+/**
-+ * qman_reserve_cgrid_range - Reserve the specified range of CGR ID
-+ * @id: the base CGR ID of the range to reserve
-+ * @count: the number of CGR IDs in the range
-+ */
-+int qman_reserve_cgrid_range(u32 id, unsigned int count);
-+static inline int qman_reserve_cgrid(u32 id)
-+{
-+	return qman_reserve_cgrid_range(id, 1);
-+}
-+
-+void qman_seed_cgrid_range(u32 id, unsigned int count);
-+
-+
-+	/* Helpers */
-+	/* ------- */
-+/**
-+ * qman_poll_fq_for_init - Check if an FQ has been initialised from OOS
-+ * @fqid: the FQID that will be initialised by other s/w
-+ *
-+ * In many situations, a FQID is provided for communication between s/w
-+ * entities, and whilst the consumer is responsible for initialising and
-+ * scheduling the FQ, the producer(s) generally create a wrapper FQ object using
-+ * and only call qman_enqueue() (no FQ initialisation, scheduling, etc). Ie;
-+ *     qman_create_fq(..., QMAN_FQ_FLAG_NO_MODIFY, ...);
-+ * However, data can not be enqueued to the FQ until it is initialised out of
-+ * the OOS state - this function polls for that condition. It is particularly
-+ * useful for users of IPC functions - each endpoint's Rx FQ is the other
-+ * endpoint's Tx FQ, so each side can initialise and schedule their Rx FQ object
-+ * and then use this API on the (NO_MODIFY) Tx FQ object in order to
-+ * synchronise. The function returns zero for success, +1 if the FQ is still in
-+ * the OOS state, or negative if there was an error.
-+ */
-+static inline int qman_poll_fq_for_init(struct qman_fq *fq)
-+{
-+	struct qm_mcr_queryfq_np np;
-+	int err;
-+	err = qman_query_fq_np(fq, &np);
-+	if (err)
-+		return err;
-+	if ((np.state & QM_MCR_NP_STATE_MASK) == QM_MCR_NP_STATE_OOS)
-+		return 1;
-+	return 0;
-+}
-+
-+	/* -------------- */
-+	/* CEETM :: types */
-+	/* -------------- */
-+/**
-+ * Token Rate Structure
-+ * Shaping rates are based on a "credit" system and a pre-configured h/w
-+ * internal timer. The following type represents a shaper "rate" parameter as a
-+ * fractional number of "tokens". Here's how it works. This (fractional) number
-+ * of tokens is added to the shaper's "credit" every time the h/w timer elapses
-+ * (up to a limit which is set by another shaper parameter). Every time a frame
-+ * is enqueued through a shaper, the shaper deducts as many tokens as there are
-+ * bytes of data in the enqueued frame. A shaper will not allow itself to
-+ * enqueue any frames if its token count is negative. As such;
-+ *
-+ *         The rate at which data is enqueued is limited by the
-+ *         rate at which tokens are added.
-+ *
-+ * Therefore if the user knows the period between these h/w timer updates in
-+ * seconds, they can calculate the maximum traffic rate of the shaper (in
-+ * bytes-per-second) from the token rate. And vice versa, they can calculate
-+ * the token rate to use in order to achieve a given traffic rate.
-+ */
-+struct qm_ceetm_rate {
-+	/* The token rate is; whole + (fraction/8192) */
-+	u32 whole:11; /* 0..2047 */
-+	u32 fraction:13; /* 0..8191 */
-+};
-+
-+struct qm_ceetm_weight_code {
-+	/* The weight code is; 5 msbits + 3 lsbits */
-+	u8 y:5;
-+	u8 x:3;
-+};
-+
-+struct qm_ceetm {
-+	unsigned int idx;
-+	struct list_head sub_portals;
-+	struct list_head lnis;
-+	unsigned int sp_range[2];
-+	unsigned int lni_range[2];
-+};
-+
-+struct qm_ceetm_sp {
-+	struct list_head node;
-+	unsigned int idx;
-+	unsigned int dcp_idx;
-+	int is_claimed;
-+	struct qm_ceetm_lni *lni;
-+};
-+
-+/* Logical Network Interface */
-+struct qm_ceetm_lni {
-+	struct list_head node;
-+	unsigned int idx;
-+	unsigned int dcp_idx;
-+	int is_claimed;
-+	struct qm_ceetm_sp *sp;
-+	struct list_head channels;
-+	int shaper_enable;
-+	int shaper_couple;
-+	int oal;
-+	struct qm_ceetm_rate cr_token_rate;
-+	struct qm_ceetm_rate er_token_rate;
-+	u16 cr_token_bucket_limit;
-+	u16 er_token_bucket_limit;
-+};
-+
-+/* Class Queue Channel */
-+struct qm_ceetm_channel {
-+	struct list_head node;
-+	unsigned int idx;
-+	unsigned int lni_idx;
-+	unsigned int dcp_idx;
-+	struct list_head class_queues;
-+	struct list_head ccgs;
-+	u8 shaper_enable;
-+	u8 shaper_couple;
-+	struct qm_ceetm_rate cr_token_rate;
-+	struct qm_ceetm_rate er_token_rate;
-+	u16 cr_token_bucket_limit;
-+	u16 er_token_bucket_limit;
-+};
-+
-+struct qm_ceetm_ccg;
-+
-+/* This callback type is used when handling congestion entry/exit. The
-+ * 'cb_ctx' value is the opaque value associated with ccg object.
-+ * 'congested' is non-zero on congestion-entry, and zero on congestion-exit.
-+ */
-+typedef void (*qman_cb_ccgr)(struct qm_ceetm_ccg *ccg, void *cb_ctx,
-+							int congested);
-+
-+/* Class Congestion Group */
-+struct qm_ceetm_ccg {
-+	struct qm_ceetm_channel *parent;
-+	struct list_head node;
-+	struct list_head cb_node;
-+	qman_cb_ccgr cb;
-+	void *cb_ctx;
-+	unsigned int idx;
-+};
-+
-+/* Class Queue */
-+struct qm_ceetm_cq {
-+	struct qm_ceetm_channel *parent;
-+	struct qm_ceetm_ccg *ccg;
-+	struct list_head node;
-+	unsigned int idx;
-+	int is_claimed;
-+	struct list_head bound_lfqids;
-+	struct list_head binding_node;
-+};
-+
-+/* Logical Frame Queue */
-+struct qm_ceetm_lfq {
-+	struct qm_ceetm_channel *parent;
-+	struct list_head node;
-+	unsigned int idx;
-+	unsigned int dctidx;
-+	u64 context_a;
-+	u32 context_b;
-+	qman_cb_mr ern;
-+};
-+
-+/**
-+ * qman_ceetm_bps2tokenrate - Given a desired rate 'bps' measured in bps
-+ * (ie. bits-per-second), compute the 'token_rate' fraction that best
-+ * approximates that rate.
-+ * @bps: the desired shaper rate in bps.
-+ * @token_rate: the output token rate computed with the given kbps.
-+ * @rounding: dictates how to round if an exact conversion is not possible; if
-+ * it is negative then 'token_rate' will round down to the highest value that
-+ * does not exceed the desired rate, if it is positive then 'token_rate' will
-+ * round up to the lowest value that is greater than or equal to the desired
-+ * rate, and if it is zero then it will round to the nearest approximation,
-+ * whether that be up or down.
-+ *
-+ * Return 0 for success, or -EINVAL if prescaler or qman clock is not available.
-+  */
-+int qman_ceetm_bps2tokenrate(u64 bps,
-+				struct qm_ceetm_rate *token_rate,
-+				int rounding);
-+
-+/**
-+ * qman_ceetm_tokenrate2bps - Given a 'token_rate', compute the
-+ * corresponding number of 'bps'.
-+ * @token_rate: the input desired token_rate fraction.
-+ * @bps: the output shaper rate in bps computed with the give token rate.
-+ * @rounding: has the same semantics as the previous function.
-+ *
-+ * Return 0 for success, or -EINVAL if prescaler or qman clock is not available.
-+ */
-+int qman_ceetm_tokenrate2bps(const struct qm_ceetm_rate *token_rate,
-+			      u64 *bps,
-+			      int rounding);
-+
-+int qman_alloc_ceetm0_channel_range(u32 *result, u32 count, u32 align,
-+								int partial);
-+static inline int qman_alloc_ceetm0_channel(u32 *result)
-+{
-+	int ret = qman_alloc_ceetm0_channel_range(result, 1, 0, 0);
-+	return (ret > 0) ? 0 : ret;
-+}
-+void qman_release_ceetm0_channel_range(u32 channelid, u32 count);
-+static inline void qman_release_ceetm0_channelid(u32 channelid)
-+{
-+	qman_release_ceetm0_channel_range(channelid, 1);
-+}
-+
-+int qman_reserve_ceetm0_channel_range(u32 channelid, u32 count);
-+static inline int qman_reserve_ceetm0_channelid(u32 channelid)
-+{
-+	return qman_reserve_ceetm0_channel_range(channelid, 1);
-+}
-+
-+void qman_seed_ceetm0_channel_range(u32 channelid, u32 count);
-+
-+
-+int qman_alloc_ceetm1_channel_range(u32 *result, u32 count, u32 align,
-+								int partial);
-+static inline int qman_alloc_ceetm1_channel(u32 *result)
-+{
-+	int ret = qman_alloc_ceetm1_channel_range(result, 1, 0, 0);
-+	return (ret > 0) ? 0 : ret;
-+}
-+void qman_release_ceetm1_channel_range(u32 channelid, u32 count);
-+static inline void qman_release_ceetm1_channelid(u32 channelid)
-+{
-+	qman_release_ceetm1_channel_range(channelid, 1);
-+}
-+int qman_reserve_ceetm1_channel_range(u32 channelid, u32 count);
-+static inline int qman_reserve_ceetm1_channelid(u32 channelid)
-+{
-+	return qman_reserve_ceetm1_channel_range(channelid, 1);
-+}
-+
-+void qman_seed_ceetm1_channel_range(u32 channelid, u32 count);
-+
-+
-+int qman_alloc_ceetm0_lfqid_range(u32 *result, u32 count, u32 align,
-+								int partial);
-+static inline int qman_alloc_ceetm0_lfqid(u32 *result)
-+{
-+	int ret = qman_alloc_ceetm0_lfqid_range(result, 1, 0, 0);
-+	return (ret > 0) ? 0 : ret;
-+}
-+void qman_release_ceetm0_lfqid_range(u32 lfqid, u32 count);
-+static inline void qman_release_ceetm0_lfqid(u32 lfqid)
-+{
-+	qman_release_ceetm0_lfqid_range(lfqid, 1);
-+}
-+int qman_reserve_ceetm0_lfqid_range(u32 lfqid, u32 count);
-+static inline int qman_reserve_ceetm0_lfqid(u32 lfqid)
-+{
-+	return qman_reserve_ceetm0_lfqid_range(lfqid, 1);
-+}
-+
-+void qman_seed_ceetm0_lfqid_range(u32 lfqid, u32 count);
-+
-+
-+int qman_alloc_ceetm1_lfqid_range(u32 *result, u32 count, u32 align,
-+								int partial);
-+static inline int qman_alloc_ceetm1_lfqid(u32 *result)
-+{
-+	int ret = qman_alloc_ceetm1_lfqid_range(result, 1, 0, 0);
-+	return (ret > 0) ? 0 : ret;
-+}
-+void qman_release_ceetm1_lfqid_range(u32 lfqid, u32 count);
-+static inline void qman_release_ceetm1_lfqid(u32 lfqid)
-+{
-+	qman_release_ceetm1_lfqid_range(lfqid, 1);
-+}
-+int qman_reserve_ceetm1_lfqid_range(u32 lfqid, u32 count);
-+static inline int qman_reserve_ceetm1_lfqid(u32 lfqid)
-+{
-+	return qman_reserve_ceetm1_lfqid_range(lfqid, 1);
-+}
-+
-+void qman_seed_ceetm1_lfqid_range(u32 lfqid, u32 count);
-+
-+
-+	/* ----------------------------- */
-+	/* CEETM :: sub-portals          */
-+	/* ----------------------------- */
-+
-+/**
-+ * qman_ceetm_sp_claim - Claims the given sub-portal, provided it is available
-+ * to us and configured for traffic-management.
-+ * @sp: the returned sub-portal object, if successful.
-+ * @dcp_id: specifies the desired Fman block (and thus the relevant CEETM
-+ * instance),
-+ * @sp_idx" is the desired sub-portal index from 0 to 15.
-+ *
-+ * Returns zero for success, or -ENODEV if the sub-portal is in use,  or -EINVAL
-+ * if the sp_idx is out of range.
-+ *
-+ * Note that if there are multiple driver domains (eg. a linux kernel versus
-+ * user-space drivers in USDPAA, or multiple guests running under a hypervisor)
-+ * then a sub-portal may be accessible by more than one instance of a qman
-+ * driver and so it may be claimed multiple times. If this is the case, it is
-+ * up to the system architect to prevent conflicting configuration actions
-+ * coming from the different driver domains. The qman drivers do not have any
-+ * behind-the-scenes coordination to prevent this from happening.
-+ */
-+int qman_ceetm_sp_claim(struct qm_ceetm_sp **sp,
-+			enum qm_dc_portal dcp_idx,
-+			unsigned int sp_idx);
-+
-+/**
-+ * qman_ceetm_sp_release - Releases a previously claimed sub-portal.
-+ * @sp: the sub-portal to be released.
-+ *
-+ * Returns 0 for success, or -EBUSY for failure if the dependencies are not
-+ * released.
-+ */
-+int qman_ceetm_sp_release(struct qm_ceetm_sp *sp);
-+
-+	/* ----------------------------------- */
-+	/* CEETM :: logical network interfaces */
-+	/* ----------------------------------- */
-+
-+/**
-+ * qman_ceetm_lni_claim - Claims an unclaimed LNI.
-+ * @lni: the returned LNI object, if successful.
-+ * @dcp_id: specifies the desired Fman block (and thus the relevant CEETM
-+ * instance)
-+ * @lni_idx: is the desired LNI index.
-+ *
-+ * Returns zero for success, or -EINVAL on failure, which will happen if the LNI
-+ * is not available or has already been claimed (and not yet successfully
-+ * released), or lni_dix is out of range.
-+ *
-+ * Note that there may be multiple driver domains (or instances) that need to
-+ * transmit out the same LNI, so this claim is only guaranteeing exclusivity
-+ * within the domain of the driver being called. See qman_ceetm_sp_claim() and
-+ * qman_ceetm_sp_get_lni() for more information.
-+ */
-+int qman_ceetm_lni_claim(struct qm_ceetm_lni **lni,
-+			 enum qm_dc_portal dcp_id,
-+			 unsigned int lni_idx);
-+
-+/**
-+ * qman_ceetm_lni_releaes - Releases a previously claimed LNI.
-+ * @lni: the lni needs to be released.
-+ *
-+ * This will only succeed if all dependent objects have been released.
-+ * Returns zero for success, or -EBUSY if the dependencies are not released.
-+ */
-+int qman_ceetm_lni_release(struct qm_ceetm_lni *lni);
-+
-+/**
-+ * qman_ceetm_sp_set_lni
-+ * qman_ceetm_sp_get_lni - Set/get the LNI that the sub-portal is currently
-+ * mapped to.
-+ * @sp: the given sub-portal.
-+ * @lni(in "set"function): the LNI object which the sp will be mappaed to.
-+ * @lni_idx(in "get" function): the LNI index which the sp is mapped to.
-+ *
-+ * Returns zero for success, or -EINVAL for the "set" function when this sp-lni
-+ * mapping has been set, or configure mapping command returns error, and
-+ * -EINVAL for "get" function when this sp-lni mapping is not set or the query
-+ * mapping command returns error.
-+ *
-+ * This may be useful in situations where multiple driver domains have access
-+ * to the same sub-portals in order to all be able to transmit out the same
-+ * physical interface (perhaps they're on different IP addresses or VPNs, so
-+ * Fman is splitting Rx traffic and here we need to converge Tx traffic). In
-+ * that case, a control-plane is likely to use qman_ceetm_lni_claim() followed
-+ * by qman_ceetm_sp_set_lni() to configure the sub-portal, and other domains
-+ * are likely to use qman_ceetm_sp_get_lni() followed by qman_ceetm_lni_claim()
-+ * in order to determine the LNI that the control-plane had assigned. This is
-+ * why the "get" returns an index, whereas the "set" takes an (already claimed)
-+ * LNI object.
-+ */
-+int qman_ceetm_sp_set_lni(struct qm_ceetm_sp *sp,
-+			  struct qm_ceetm_lni *lni);
-+int qman_ceetm_sp_get_lni(struct qm_ceetm_sp *sp,
-+			  unsigned int *lni_idx);
-+
-+/**
-+ * qman_ceetm_lni_enable_shaper
-+ * qman_ceetm_lni_disable_shaper - Enables/disables shaping on the LNI.
-+ * @lni: the given LNI.
-+ * @coupled: indicates whether CR and ER are coupled.
-+ * @oal: the overhead accounting length which is added to the actual length of
-+ * each frame when performing shaper calculations.
-+ *
-+ * When the number of (unused) committed-rate tokens reach the committed-rate
-+ * token limit, 'coupled' indicates whether surplus tokens should be added to
-+ * the excess-rate token count (up to the excess-rate token limit).
-+ * When LNI is claimed, the shaper is disabled by default. The enable function
-+ * will turn on this shaper for this lni.
-+ * Whenever a claimed LNI is first enabled for shaping, its committed and
-+ * excess token rates and limits are zero, so will need to be changed to do
-+ * anything useful. The shaper can subsequently be enabled/disabled without
-+ * resetting the shaping parameters, but the shaping parameters will be reset
-+ * when the LNI is released.
-+ *
-+ * Returns zero for success, or  errno for "enable" function in the cases as:
-+ * a) -EINVAL if the shaper is already enabled,
-+ * b) -EIO if the configure shaper command returns error.
-+ * For "disable" function, returns:
-+ * a) -EINVAL if the shaper is has already disabled.
-+ * b) -EIO if calling configure shaper command returns error.
-+ */
-+int qman_ceetm_lni_enable_shaper(struct qm_ceetm_lni *lni, int coupled,
-+								int oal);
-+int qman_ceetm_lni_disable_shaper(struct qm_ceetm_lni *lni);
-+
-+/**
-+ * qman_ceetm_lni_is_shaper_enabled - Check LNI shaper status
-+ * @lni: the give LNI
-+ */
-+int qman_ceetm_lni_is_shaper_enabled(struct qm_ceetm_lni *lni);
-+
-+/**
-+ * qman_ceetm_lni_set_commit_rate
-+ * qman_ceetm_lni_get_commit_rate
-+ * qman_ceetm_lni_set_excess_rate
-+ * qman_ceetm_lni_get_excess_rate - Set/get the shaper CR/ER token rate and
-+ * token limit for the given LNI.
-+ * @lni: the given LNI.
-+ * @token_rate: the desired token rate for "set" fuction, or the token rate of
-+ * the LNI queried by "get" function.
-+ * @token_limit: the desired token bucket limit for "set" function, or the token
-+ * limit of the given LNI queried by "get" function.
-+ *
-+ * Returns zero for success. The "set" function returns -EINVAL if the given
-+ * LNI is unshapped or -EIO if the configure shaper command returns error.
-+ * The "get" function returns -EINVAL if the token rate or the token limit is
-+ * not set or the query command returns error.
-+ */
-+int qman_ceetm_lni_set_commit_rate(struct qm_ceetm_lni *lni,
-+				   const struct qm_ceetm_rate *token_rate,
-+				   u16 token_limit);
-+int qman_ceetm_lni_get_commit_rate(struct qm_ceetm_lni *lni,
-+				   struct qm_ceetm_rate *token_rate,
-+				   u16 *token_limit);
-+int qman_ceetm_lni_set_excess_rate(struct qm_ceetm_lni *lni,
-+				   const struct qm_ceetm_rate *token_rate,
-+				   u16 token_limit);
-+int qman_ceetm_lni_get_excess_rate(struct qm_ceetm_lni *lni,
-+				   struct qm_ceetm_rate *token_rate,
-+				   u16 *token_limit);
-+/**
-+ * qman_ceetm_lni_set_commit_rate_bps
-+ * qman_ceetm_lni_get_commit_rate_bps
-+ * qman_ceetm_lni_set_excess_rate_bps
-+ * qman_ceetm_lni_get_excess_rate_bps - Set/get the shaper CR/ER rate
-+ * and token limit for the given LNI.
-+ * @lni: the given LNI.
-+ * @bps: the desired shaping rate in bps for "set" fuction, or the shaping rate
-+ * of the LNI queried by "get" function.
-+ * @token_limit: the desired token bucket limit for "set" function, or the token
-+ * limit of the given LNI queried by "get" function.
-+ *
-+ * Returns zero for success. The "set" function returns -EINVAL if the given
-+ * LNI is unshapped or -EIO if the configure shaper command returns error.
-+ * The "get" function returns -EINVAL if the token rate or the token limit is
-+ * not set or the query command returns error.
-+ */
-+int qman_ceetm_lni_set_commit_rate_bps(struct qm_ceetm_lni *lni,
-+				       u64 bps,
-+				       u16 token_limit);
-+int qman_ceetm_lni_get_commit_rate_bps(struct qm_ceetm_lni *lni,
-+				       u64 *bps, u16 *token_limit);
-+int qman_ceetm_lni_set_excess_rate_bps(struct qm_ceetm_lni *lni,
-+				       u64 bps,
-+				       u16 token_limit);
-+int qman_ceetm_lni_get_excess_rate_bps(struct qm_ceetm_lni *lni,
-+				       u64 *bps, u16 *token_limit);
-+
-+/**
-+ * qman_ceetm_lni_set_tcfcc
-+ * qman_ceetm_lni_get_tcfcc - Configure/query "Traffic Class Flow Control".
-+ * @lni: the given LNI.
-+ * @cq_level: is between 0 and 15, representing individual class queue levels
-+ * (CQ0 to CQ7 for every channel) and grouped class queue levels (CQ8 to CQ15
-+ * for every channel).
-+ * @traffic_class: is between 0 and 7 when associating a given class queue level
-+ * to a traffic class, or -1 when disabling traffic class flow control for this
-+ * class queue level.
-+ *
-+ * Return zero for success, or -EINVAL if the cq_level or traffic_class is out
-+ * of range as indicated above, or -EIO if the configure/query tcfcc command
-+ * returns error.
-+ *
-+ * Refer to the section of QMan CEETM traffic class flow control in the
-+ * Reference Manual.
-+ */
-+int qman_ceetm_lni_set_tcfcc(struct qm_ceetm_lni *lni,
-+			     unsigned int cq_level,
-+			     int traffic_class);
-+int qman_ceetm_lni_get_tcfcc(struct qm_ceetm_lni *lni,
-+			     unsigned int cq_level,
-+			     int *traffic_class);
-+
-+	/* ----------------------------- */
-+	/* CEETM :: class queue channels */
-+	/* ----------------------------- */
-+
-+/**
-+ * qman_ceetm_channel_claim - Claims an unclaimed CQ channel that is mapped to
-+ * the given LNI.
-+ * @channel: the returned class queue channel object, if successful.
-+ * @lni: the LNI that the channel belongs to.
-+ *
-+ * Channels are always initially "unshaped".
-+ *
-+ * Return zero for success, or -ENODEV if there is no channel available(all 32
-+ * channels are claimed) or -EINVAL if the channel mapping command returns
-+ * error.
-+ */
-+int qman_ceetm_channel_claim(struct qm_ceetm_channel **channel,
-+			     struct qm_ceetm_lni *lni);
-+
-+/**
-+ * qman_ceetm_channel_release - Releases a previously claimed CQ channel.
-+ * @channel: the channel needs to be released.
-+ *
-+ * Returns zero for success, or -EBUSY if the dependencies are still in use.
-+ *
-+ * Note any shaping of the channel will be cleared to leave it in an unshaped
-+ * state.
-+ */
-+int qman_ceetm_channel_release(struct qm_ceetm_channel *channel);
-+
-+/**
-+ * qman_ceetm_channel_enable_shaper
-+ * qman_ceetm_channel_disable_shaper - Enables/disables shaping on the channel.
-+ * @channel: the given channel.
-+ * @coupled: indicates whether surplus CR tokens should be added to the
-+ * excess-rate token count (up to the excess-rate token limit) when the number
-+ * of (unused) committed-rate tokens reach the committed_rate token limit.
-+ *
-+ * Whenever a claimed channel is first enabled for shaping, its committed and
-+ * excess token rates and limits are zero, so will need to be changed to do
-+ * anything useful. The shaper can subsequently be enabled/disabled without
-+ * resetting the shaping parameters, but the shaping parameters will be reset
-+ * when the channel is released.
-+ *
-+ * Return 0 for success, or -EINVAL for failure, in the case that the channel
-+ * shaper has been enabled/disabled or the management command returns error.
-+ */
-+int qman_ceetm_channel_enable_shaper(struct qm_ceetm_channel *channel,
-+							 int coupled);
-+int qman_ceetm_channel_disable_shaper(struct qm_ceetm_channel *channel);
-+
-+/**
-+ * qman_ceetm_channel_is_shaper_enabled - Check channel shaper status.
-+ * @channel: the give channel.
-+ */
-+int qman_ceetm_channel_is_shaper_enabled(struct qm_ceetm_channel *channel);
-+
-+/**
-+ * qman_ceetm_channel_set_commit_rate
-+ * qman_ceetm_channel_get_commit_rate
-+ * qman_ceetm_channel_set_excess_rate
-+ * qman_ceetm_channel_get_excess_rate - Set/get channel CR/ER shaper parameters.
-+ * @channel: the given channel.
-+ * @token_rate: the desired token rate for "set" function, or the queried token
-+ * rate for "get" function.
-+ * @token_limit: the desired token limit for "set" function, or the queried
-+ * token limit for "get" function.
-+ *
-+ * Return zero for success. The "set" function returns -EINVAL if the channel
-+ * is unshaped, or -EIO if the configure shapper command returns error. The
-+ * "get" function returns -EINVAL if token rate of token limit is not set, or
-+ * the query shaper command returns error.
-+ */
-+int qman_ceetm_channel_set_commit_rate(struct qm_ceetm_channel *channel,
-+				   const struct qm_ceetm_rate *token_rate,
-+				   u16 token_limit);
-+int qman_ceetm_channel_get_commit_rate(struct qm_ceetm_channel *channel,
-+				   struct qm_ceetm_rate *token_rate,
-+				   u16 *token_limit);
-+int qman_ceetm_channel_set_excess_rate(struct qm_ceetm_channel *channel,
-+				   const struct qm_ceetm_rate *token_rate,
-+				   u16 token_limit);
-+int qman_ceetm_channel_get_excess_rate(struct qm_ceetm_channel *channel,
-+				   struct qm_ceetm_rate *token_rate,
-+				   u16 *token_limit);
-+/**
-+ * qman_ceetm_channel_set_commit_rate_bps
-+ * qman_ceetm_channel_get_commit_rate_bps
-+ * qman_ceetm_channel_set_excess_rate_bps
-+ * qman_ceetm_channel_get_excess_rate_bps - Set/get channel CR/ER shaper
-+ * parameters.
-+ * @channel: the given channel.
-+ * @token_rate: the desired shaper rate in bps for "set" function, or the
-+ * shaper rate in bps for "get" function.
-+ * @token_limit: the desired token limit for "set" function, or the queried
-+ * token limit for "get" function.
-+ *
-+ * Return zero for success. The "set" function returns -EINVAL if the channel
-+ * is unshaped, or -EIO if the configure shapper command returns error. The
-+ * "get" function returns -EINVAL if token rate of token limit is not set, or
-+ * the query shaper command returns error.
-+ */
-+int qman_ceetm_channel_set_commit_rate_bps(struct qm_ceetm_channel *channel,
-+					   u64 bps, u16 token_limit);
-+int qman_ceetm_channel_get_commit_rate_bps(struct qm_ceetm_channel *channel,
-+					   u64 *bps, u16 *token_limit);
-+int qman_ceetm_channel_set_excess_rate_bps(struct qm_ceetm_channel *channel,
-+					   u64 bps, u16 token_limit);
-+int qman_ceetm_channel_get_excess_rate_bps(struct qm_ceetm_channel *channel,
-+					   u64 *bps, u16 *token_limit);
-+
-+/**
-+ * qman_ceetm_channel_set_weight
-+ * qman_ceetm_channel_get_weight - Set/get the weight for unshaped channel
-+ * @channel: the given channel.
-+ * @token_limit: the desired token limit as the weight of the unshaped channel
-+ * for "set" function, or the queried token limit for "get" function.
-+ *
-+ * The algorithm of unshaped fair queuing (uFQ) is used for unshaped channel.
-+ * It allows the unshaped channels to be included in the CR time eligible list,
-+ * and thus use the configured CR token limit value as their fair queuing
-+ * weight.
-+ *
-+ * Return zero for success, or -EINVAL if the channel is a shaped channel or
-+ * the management command returns error.
-+ */
-+int qman_ceetm_channel_set_weight(struct qm_ceetm_channel *channel,
-+				  u16 token_limit);
-+int qman_ceetm_channel_get_weight(struct qm_ceetm_channel *channel,
-+				  u16 *token_limit);
-+
-+/**
-+ * qman_ceetm_channel_set_group
-+ * qman_ceetm_channel_get_group - Set/get the grouping of the class scheduler.
-+ * @channel: the given channel.
-+ * @group_b: indicates whether there is group B in this channel.
-+ * @prio_a: the priority of group A.
-+ * @prio_b: the priority of group B.
-+ *
-+ * There are 8 individual class queues (CQ0-CQ7), and 8 grouped class queues
-+ * (CQ8-CQ15). If 'group_b' is zero, then all the grouped class queues are in
-+ * group A, otherwise they are split into group A (CQ8-11) and group B
-+ * (CQ12-C15). The individual class queues and the group(s) are in strict
-+ * priority order relative to each other. Within the group(s), the scheduling
-+ * is not strict priority order, but the result of scheduling within a group
-+ * is in strict priority order relative to the other class queues in the
-+ * channel. 'prio_a' and 'prio_b' control the priority order of the groups
-+ * relative to the individual class queues, and take values from 0-7. Eg. if
-+ * 'group_b' is non-zero, 'prio_a' is 2 and 'prio_b' is 6, then the strict
-+ * priority order would be;
-+ *      CQ0, CQ1, CQ2, GROUPA, CQ3, CQ4, CQ5, CQ6, GROUPB, CQ7
-+ *
-+ * Return 0 for success. For "set" function, returns -EINVAL if prio_a or
-+ * prio_b are out of the range 0 - 7 (priority of group A or group B can not
-+ * be 0, CQ0 is always the highest class queue in this channel.), or -EIO if
-+ * the configure scheduler command returns error. For "get" function, return
-+ * -EINVAL if the query scheduler command returns error.
-+ */
-+int qman_ceetm_channel_set_group(struct qm_ceetm_channel *channel,
-+			     int group_b,
-+			     unsigned int prio_a,
-+			     unsigned int prio_b);
-+int qman_ceetm_channel_get_group(struct qm_ceetm_channel *channel,
-+			     int *group_b,
-+			     unsigned int *prio_a,
-+			     unsigned int *prio_b);
-+
-+/**
-+ * qman_ceetm_channel_set_group_cr_eligibility
-+ * qman_ceetm_channel_set_group_er_eligibility - Set channel group eligibility
-+ * @channel: the given channel object
-+ * @group_b: indicates whether there is group B in this channel.
-+ * @cre: the commit rate eligibility, 1 for enable, 0 for disable.
-+ *
-+ * Return zero for success, or -EINVAL if eligibility setting fails.
-+*/
-+int qman_ceetm_channel_set_group_cr_eligibility(struct qm_ceetm_channel
-+				*channel, int group_b, int cre);
-+int qman_ceetm_channel_set_group_er_eligibility(struct qm_ceetm_channel
-+				*channel, int group_b, int ere);
-+
-+/**
-+ * qman_ceetm_channel_set_cq_cr_eligibility
-+ * qman_ceetm_channel_set_cq_er_eligibility - Set channel cq eligibility
-+ * @channel: the given channel object
-+ * @idx: is from 0 to 7 (representing CQ0 to CQ7).
-+ * @cre: the commit rate eligibility, 1 for enable, 0 for disable.
-+ *
-+ * Return zero for success, or -EINVAL if eligibility setting fails.
-+*/
-+int qman_ceetm_channel_set_cq_cr_eligibility(struct qm_ceetm_channel *channel,
-+					unsigned int idx, int cre);
-+int qman_ceetm_channel_set_cq_er_eligibility(struct qm_ceetm_channel *channel,
-+					unsigned int idx, int ere);
-+
-+	/* --------------------- */
-+	/* CEETM :: class queues */
-+	/* --------------------- */
-+
-+/**
-+ * qman_ceetm_cq_claim - Claims an individual class queue.
-+ * @cq: the returned class queue object, if successful.
-+ * @channel: the class queue channel.
-+ * @idx: is from 0 to 7 (representing CQ0 to CQ7).
-+ * @ccg: represents the class congestion group that this class queue should be
-+ * subscribed to, or NULL if no congestion group membership is desired.
-+ *
-+ * Returns zero for success, or -EINVAL if @idx is out of range 0 - 7 or
-+ * if this class queue has been claimed, or configure class queue command
-+ * returns error, or returns -ENOMEM if allocating CQ memory fails.
-+ */
-+int qman_ceetm_cq_claim(struct qm_ceetm_cq **cq,
-+			struct qm_ceetm_channel *channel,
-+			unsigned int idx,
-+			struct qm_ceetm_ccg *ccg);
-+
-+/**
-+ * qman_ceetm_cq_claim_A - Claims a class queue group A.
-+ * @cq: the returned class queue object, if successful.
-+ * @channel: the class queue channel.
-+ * @idx: is from 8 to 15 if only group A exits, otherwise, it is from 8 to 11.
-+ * @ccg: represents the class congestion group that this class queue should be
-+ * subscribed to, or NULL if no congestion group membership is desired.
-+ *
-+ * Return zero for success, or -EINVAL if @idx is out the range or if
-+ * this class queue has been claimed or configure class queue command returns
-+ * error, or returns -ENOMEM if allocating CQ memory fails.
-+ */
-+int qman_ceetm_cq_claim_A(struct qm_ceetm_cq **cq,
-+				struct qm_ceetm_channel *channel,
-+				unsigned int idx,
-+				struct qm_ceetm_ccg *ccg);
-+
-+/**
-+ * qman_ceetm_cq_claim_B - Claims a class queue group B.
-+ * @cq: the returned class queue object, if successful.
-+ * @channel: the class queue channel.
-+ * @idx: is from 0 to 3 (CQ12 to CQ15).
-+ * @ccg: represents the class congestion group that this class queue should be
-+ * subscribed to, or NULL if no congestion group membership is desired.
-+ *
-+ * Return zero for success, or -EINVAL if @idx is out the range or if
-+ * this class queue has been claimed or configure class queue command returns
-+ * error, or returns -ENOMEM if allocating CQ memory fails.
-+ */
-+int qman_ceetm_cq_claim_B(struct qm_ceetm_cq **cq,
-+				struct qm_ceetm_channel *channel,
-+				unsigned int idx,
-+				struct qm_ceetm_ccg *ccg);
-+
-+/**
-+ * qman_ceetm_cq_release - Releases a previously claimed class queue.
-+ * @cq: The class queue to be released.
-+ *
-+ * Return zero for success, or -EBUSY if the dependent objects (eg. logical
-+ * FQIDs) have not been released.
-+ */
-+int qman_ceetm_cq_release(struct qm_ceetm_cq *cq);
-+
-+/**
-+ * qman_ceetm_set_queue_weight
-+ * qman_ceetm_get_queue_weight - Configure/query the weight of a grouped class
-+ * queue.
-+ * @cq: the given class queue.
-+ * @weight_code: the desired weight code to set for the given class queue for
-+ * "set" function or the queired weight code for "get" function.
-+ *
-+ * Grouped class queues have a default weight code of zero, which corresponds to
-+ * a scheduler weighting of 1. This function can be used to modify a grouped
-+ * class queue to another weight, (Use the helpers qman_ceetm_wbfs2ratio()
-+ * and qman_ceetm_ratio2wbfs() to convert between these 'weight_code' values
-+ * and the corresponding sharing weight.)
-+ *
-+ * Returns zero for success, or -EIO if the configure weight command returns
-+ * error for "set" function, or -EINVAL if the query command returns
-+ * error for "get" function.
-+ * See section "CEETM Weighted Scheduling among Grouped Classes" in Reference
-+ * Manual for weight and weight code.
-+ */
-+int qman_ceetm_set_queue_weight(struct qm_ceetm_cq *cq,
-+				struct qm_ceetm_weight_code *weight_code);
-+int qman_ceetm_get_queue_weight(struct qm_ceetm_cq *cq,
-+				struct qm_ceetm_weight_code *weight_code);
-+
-+/**
-+ * qman_ceetm_set_queue_weight_in_ratio
-+ * qman_ceetm_get_queue_weight_in_ratio - Configure/query the weight of a
-+ * grouped class queue.
-+ * @cq: the given class queue.
-+ * @ratio: the weight in ratio. It should be the real ratio number multiplied
-+ * by 100 to get rid of fraction.
-+ *
-+ * Returns zero for success, or -EIO if the configure weight command returns
-+ * error for "set" function, or -EINVAL if the query command returns
-+ * error for "get" function.
-+ */
-+int qman_ceetm_set_queue_weight_in_ratio(struct qm_ceetm_cq *cq, u32 ratio);
-+int qman_ceetm_get_queue_weight_in_ratio(struct qm_ceetm_cq *cq, u32 *ratio);
-+
-+/* Weights are encoded using a pseudo-exponential scheme. The weight codes 0,
-+ * 32, 64, [...] correspond to weights of 1, 2, 4, [...]. The weights
-+ * corresponding to intermediate weight codes are calculated using linear
-+ * interpolation on the inverted values. Or put another way, the inverse weights
-+ * for each 32nd weight code are 1, 1/2, 1/4, [...], and so the intervals
-+ * between these are divided linearly into 32 intermediate values, the inverses
-+ * of which form the remaining weight codes.
-+ *
-+ * The Weighted Bandwidth Fair Scheduling (WBFS) algorithm provides a form of
-+ * scheduling within a group of class queues (group A or B). Weights are used to
-+ * normalise the class queues to an underlying BFS algorithm where all class
-+ * queues are assumed to require "equal bandwidth". So the weights referred to
-+ * by the weight codes act as divisors on the size of frames being enqueued. Ie.
-+ * one class queue in a group is assigned a weight of 2 whilst the other class
-+ * queues in the group keep the default weight of 1, then the WBFS scheduler
-+ * will effectively treat all frames enqueued on the weight-2 class queue as
-+ * having half the number of bytes they really have. Ie. if all other things are
-+ * equal, that class queue would get twice as much bytes-per-second bandwidth as
-+ * the others. So weights should be chosen to provide bandwidth ratios between
-+ * members of the same class queue group. These weights have no bearing on
-+ * behaviour outside that group's WBFS mechanism though.
-+ */
-+
-+/**
-+ * qman_ceetm_wbfs2ratio - Given a weight code ('wbfs'), an accurate fractional
-+ * representation of the corresponding weight is given (in order to not lose
-+ * any precision).
-+ * @weight_code: The given weight code in WBFS.
-+ * @numerator: the numerator part of the weight computed by the weight code.
-+ * @denominator: the denominator part of the weight computed by the weight code
-+ *
-+ * Returns zero for success or -EINVAL if the given weight code is illegal.
-+ */
-+int qman_ceetm_wbfs2ratio(struct qm_ceetm_weight_code *weight_code,
-+			   u32 *numerator,
-+			   u32 *denominator);
-+/**
-+ * qman_ceetm_ratio2wbfs - Given a weight, find the nearest possible weight code
-+ * If the user needs to know how close this is, convert the resulting weight
-+ * code back to a weight and compare.
-+ * @numerator: numerator part of the given weight.
-+ * @denominator: denominator part of the given weight.
-+ * @weight_code: the weight code computed from the given weight.
-+ *
-+ * Returns zero for success, or -ERANGE if "numerator/denominator" is outside
-+ * the range of weights.
-+ */
-+int qman_ceetm_ratio2wbfs(u32 numerator,
-+			   u32 denominator,
-+			   struct qm_ceetm_weight_code *weight_code,
-+			   int rounding);
-+
-+#define QMAN_CEETM_FLAG_CLEAR_STATISTICS_COUNTER	0x1
-+/**
-+ * qman_ceetm_cq_get_dequeue_statistics - Get the statistics provided by CEETM
-+ * CQ counters.
-+ * @cq: the given CQ object.
-+ * @flags: indicates whether the statistics counter will be cleared after query.
-+ * @frame_count: The number of the frames that have been counted since the
-+ * counter was cleared last time.
-+ * @byte_count: the number of bytes in all frames that have been counted.
-+ *
-+ * Return zero for success or -EINVAL if query statistics command returns error.
-+ *
-+ */
-+int qman_ceetm_cq_get_dequeue_statistics(struct qm_ceetm_cq *cq, u32 flags,
-+					u64 *frame_count, u64 *byte_count);
-+
-+/**
-+ * qman_ceetm_drain_cq - drain the CQ till it is empty.
-+ * @cq: the give CQ object.
-+ * Return 0 for success or -EINVAL for unsuccessful command to empty CQ.
-+ */
-+int qman_ceetm_drain_cq(struct qm_ceetm_cq *cq);
-+
-+	/* ---------------------- */
-+	/* CEETM :: logical FQIDs */
-+	/* ---------------------- */
-+/**
-+ * qman_ceetm_lfq_claim - Claims an unused logical FQID, associates it with
-+ * the given class queue.
-+ * @lfq: the returned lfq object, if successful.
-+ * @cq: the class queue which needs to claim a LFQID.
-+ *
-+ * Return zero for success, or -ENODEV if no LFQID is available or -ENOMEM if
-+ * allocating memory for lfq fails, or -EINVAL if configuring LFQMT fails.
-+ */
-+int qman_ceetm_lfq_claim(struct qm_ceetm_lfq **lfq,
-+				struct qm_ceetm_cq *cq);
-+
-+/**
-+ * qman_ceetm_lfq_release - Releases a previously claimed logical FQID.
-+ * @lfq: the lfq to be released.
-+ *
-+ * Return zero for success.
-+ */
-+int qman_ceetm_lfq_release(struct qm_ceetm_lfq *lfq);
-+
-+/**
-+ * qman_ceetm_lfq_set_context
-+ * qman_ceetm_lfq_get_context - Set/get the context_a/context_b pair to the
-+ * "dequeue context table" associated with the logical FQID.
-+ * @lfq: the given logical FQ object.
-+ * @context_a: contextA of the dequeue context.
-+ * @context_b: contextB of the dequeue context.
-+ *
-+ * Returns zero for success, or -EINVAL if there is error to set/get the
-+ * context pair.
-+ */
-+int qman_ceetm_lfq_set_context(struct qm_ceetm_lfq *lfq,
-+				u64 context_a,
-+				u32 context_b);
-+int qman_ceetm_lfq_get_context(struct qm_ceetm_lfq *lfq,
-+				u64 *context_a,
-+				u32 *context_b);
-+
-+/**
-+ * qman_ceetm_create_fq - Initialise a FQ object for the LFQ.
-+ * @lfq: the given logic fq.
-+ * @fq: the fq object created for the given logic fq.
-+ *
-+ * The FQ object can be used in qman_enqueue() and qman_enqueue_orp() APIs to
-+ * target a logical FQID (and the class queue it is associated with).
-+ * Note that this FQ object can only be used for enqueues, and
-+ * in the case of qman_enqueue_orp() it can not be used as the 'orp' parameter,
-+ * only as 'fq'. This FQ object can not (and shouldn't) be destroyed, it is only
-+ * valid as long as the underlying 'lfq' remains claimed. It is the user's
-+ * responsibility to ensure that the underlying 'lfq' is not released until any
-+ * enqueues to this FQ object have completed. The only field the user needs to
-+ * fill in is fq->cb.ern, as that enqueue rejection handler is the callback that
-+ * could conceivably be called on this FQ object. This API can be called
-+ * multiple times to create multiple FQ objects referring to the same logical
-+ * FQID, and any enqueue rejections will respect the callback of the object that
-+ * issued the enqueue (and will identify the object via the parameter passed to
-+ * the callback too). There is no 'flags' parameter to this API as there is for
-+ * qman_create_fq() - the created FQ object behaves as though qman_create_fq()
-+ * had been called with the single flag QMAN_FQ_FLAG_NO_MODIFY.
-+ *
-+ * Returns 0 for success.
-+ */
-+int qman_ceetm_create_fq(struct qm_ceetm_lfq *lfq, struct qman_fq *fq);
-+
-+	/* -------------------------------- */
-+	/* CEETM :: class congestion groups */
-+	/* -------------------------------- */
-+
-+/**
-+ * qman_ceetm_ccg_claim - Claims an unused CCG.
-+ * @ccg: the returned CCG object, if successful.
-+ * @channel: the given class queue channel
-+ * @cscn: the callback function of this CCG.
-+ * @cb_ctx: the corresponding context to be used used if state change
-+ * notifications are later enabled for this CCG.
-+ *
-+ * The congestion group is local to the given class queue channel, so only
-+ * class queues within the channel can be associated with that congestion group.
-+ * The association of class queues to congestion groups occurs  when the class
-+ * queues are claimed, see qman_ceetm_cq_claim() and related functions.
-+ * Congestion groups are in a "zero" state when initially claimed, and they are
-+ * returned to that state when released.
-+ *
-+ * Return zero for success, or -EINVAL if no CCG in the channel is available.
-+ */
-+int qman_ceetm_ccg_claim(struct qm_ceetm_ccg **ccg,
-+			 struct qm_ceetm_channel *channel,
-+			 unsigned int idx,
-+			 void (*cscn)(struct qm_ceetm_ccg *,
-+				       void *cb_ctx,
-+				       int congested),
-+			 void *cb_ctx);
-+
-+/**
-+ * qman_ceetm_ccg_release - Releases a previously claimed CCG.
-+ * @ccg: the given ccg.
-+ *
-+ * Returns zero for success, or -EBUSY if the given ccg's dependent objects
-+ * (class queues that are associated with the CCG) have not been released.
-+ */
-+int qman_ceetm_ccg_release(struct qm_ceetm_ccg *ccg);
-+
-+/* This struct is used to specify attributes for a CCG. The 'we_mask' field
-+ * controls which CCG attributes are to be updated, and the remainder specify
-+ * the values for those attributes. A CCG counts either frames or the bytes
-+ * within those frames, but not both ('mode'). A CCG can optionally cause
-+ * enqueues to be rejected, due to tail-drop or WRED, or both (they are
-+ * independent options, 'td_en' and 'wr_en_g,wr_en_y,wr_en_r'). Tail-drop can be
-+ * level-triggered due to a single threshold ('td_thres') or edge-triggered due
-+ * to a "congestion state", but not both ('td_mode'). Congestion state has
-+ * distinct entry and exit thresholds ('cs_thres_in' and 'cs_thres_out'), and
-+ * notifications can be sent to software the CCG goes in to and out of this
-+ * congested state ('cscn_en'). */
-+struct qm_ceetm_ccg_params {
-+	/* Boolean fields together in a single bitfield struct */
-+	struct {
-+		/* Whether to count bytes or frames. 1==frames */
-+		u8 mode:1;
-+		/* En/disable tail-drop. 1==enable */
-+		u8 td_en:1;
-+		/* Tail-drop on congestion-state or threshold. 1=threshold */
-+		u8 td_mode:1;
-+		/* Generate congestion state change notifications. 1==enable */
-+		u8 cscn_en:1;
-+		/* Enable WRED rejections (per colour). 1==enable */
-+		u8 wr_en_g:1;
-+		u8 wr_en_y:1;
-+		u8 wr_en_r:1;
-+	} __packed;
-+	/* Tail-drop threshold. See qm_cgr_thres_[gs]et64(). */
-+	struct qm_cgr_cs_thres td_thres;
-+	/* Congestion state thresholds, for entry and exit. */
-+	struct qm_cgr_cs_thres cs_thres_in;
-+	struct qm_cgr_cs_thres cs_thres_out;
-+	/* Overhead accounting length. Per-packet "tax", from -128 to +127 */
-+	signed char oal;
-+	/* Congestion state change notification for DCP portal, virtual CCGID*/
-+	/* WRED parameters. */
-+	struct qm_cgr_wr_parm wr_parm_g;
-+	struct qm_cgr_wr_parm wr_parm_y;
-+	struct qm_cgr_wr_parm wr_parm_r;
-+};
-+/* Bits used in 'we_mask' to qman_ceetm_ccg_set(), controls which attributes of
-+ * the CCGR are to be updated. */
-+#define QM_CCGR_WE_MODE         0x0001 /* mode (bytes/frames) */
-+#define QM_CCGR_WE_CS_THRES_IN  0x0002 /* congestion state entry threshold */
-+#define QM_CCGR_WE_TD_EN        0x0004 /* congestion state tail-drop enable */
-+#define QM_CCGR_WE_CSCN_TUPD	0x0008 /* CSCN target update */
-+#define QM_CCGR_WE_CSCN_EN      0x0010 /* congestion notification enable */
-+#define QM_CCGR_WE_WR_EN_R      0x0020 /* WRED enable - red */
-+#define QM_CCGR_WE_WR_EN_Y      0x0040 /* WRED enable - yellow */
-+#define QM_CCGR_WE_WR_EN_G      0x0080 /* WRED enable - green */
-+#define QM_CCGR_WE_WR_PARM_R    0x0100 /* WRED parameters - red */
-+#define QM_CCGR_WE_WR_PARM_Y    0x0200 /* WRED parameters - yellow */
-+#define QM_CCGR_WE_WR_PARM_G    0x0400 /* WRED parameters - green */
-+#define QM_CCGR_WE_OAL          0x0800 /* overhead accounting length */
-+#define QM_CCGR_WE_CS_THRES_OUT 0x1000 /* congestion state exit threshold */
-+#define QM_CCGR_WE_TD_THRES     0x2000 /* tail-drop threshold */
-+#define QM_CCGR_WE_TD_MODE      0x4000 /* tail-drop mode (state/threshold) */
-+#define QM_CCGR_WE_CDV		0x8000 /* cdv */
-+
-+/**
-+ * qman_ceetm_ccg_set
-+ * qman_ceetm_ccg_get - Configure/query a subset of CCG attributes.
-+ * @ccg: the given CCG object.
-+ * @we_mask: the write enable mask.
-+ * @params: the parameters setting for this ccg
-+ *
-+ * Return 0 for success, or -EIO if configure ccg command returns error for
-+ * "set" function, or -EINVAL if query ccg command returns error for "get"
-+ * function.
-+ */
-+int qman_ceetm_ccg_set(struct qm_ceetm_ccg *ccg,
-+			u16 we_mask,
-+			const struct qm_ceetm_ccg_params *params);
-+int qman_ceetm_ccg_get(struct qm_ceetm_ccg *ccg,
-+			struct qm_ceetm_ccg_params *params);
-+
-+/** qman_ceetm_cscn_swp_set - Add or remove a software portal from the target
-+ * mask.
-+ * qman_ceetm_cscn_swp_get - Query whether a given software portal index is
-+ * in the cscn target mask.
-+ * @ccg: the give CCG object.
-+ * @swp_idx: the index of the software portal.
-+ * @cscn_enabled: 1: Set the swp to be cscn target. 0: remove the swp from
-+ * the target mask.
-+ * @we_mask: the write enable mask.
-+ * @params: the parameters setting for this ccg
-+ *
-+ * Return 0 for success, or -EINVAL if command in set/get function fails.
-+ */
-+int qman_ceetm_cscn_swp_set(struct qm_ceetm_ccg *ccg,
-+				u16 swp_idx,
-+				unsigned int cscn_enabled,
-+				u16 we_mask,
-+				const struct qm_ceetm_ccg_params *params);
-+int qman_ceetm_cscn_swp_get(struct qm_ceetm_ccg *ccg,
-+				u16 swp_idx,
-+				unsigned int *cscn_enabled);
-+
-+/** qman_ceetm_cscn_dcp_set - Add or remove a direct connect portal from the\
-+ * target mask.
-+ * qman_ceetm_cscn_dcp_get - Query whether a given direct connect portal index
-+ * is in the cscn target mask.
-+ * @ccg: the give CCG object.
-+ * @dcp_idx: the index of the direct connect portal.
-+ * @vcgid: congestion state change notification for dcp portal, virtual CGID.
-+ * @cscn_enabled: 1: Set the dcp to be cscn target. 0: remove the dcp from
-+ * the target mask.
-+ * @we_mask: the write enable mask.
-+ * @params: the parameters setting for this ccg
-+ *
-+ * Return 0 for success, or -EINVAL if command in set/get function fails.
-+  */
-+int qman_ceetm_cscn_dcp_set(struct qm_ceetm_ccg *ccg,
-+				u16 dcp_idx,
-+				u8 vcgid,
-+				unsigned int cscn_enabled,
-+				u16 we_mask,
-+				const struct qm_ceetm_ccg_params *params);
-+int qman_ceetm_cscn_dcp_get(struct qm_ceetm_ccg *ccg,
-+				u16 dcp_idx,
-+				u8 *vcgid,
-+				unsigned int *cscn_enabled);
-+
-+/**
-+ * qman_ceetm_ccg_get_reject_statistics - Get the statistics provided by
-+ * CEETM CCG counters.
-+ * @ccg: the given CCG object.
-+ * @flags: indicates whether the statistics counter will be cleared after query.
-+ * @frame_count: The number of the frames that have been counted since the
-+ * counter was cleared last time.
-+ * @byte_count: the number of bytes in all frames that have been counted.
-+ *
-+ * Return zero for success or -EINVAL if query statistics command returns error.
-+ *
-+ */
-+int qman_ceetm_ccg_get_reject_statistics(struct qm_ceetm_ccg *ccg, u32 flags,
-+					u64 *frame_count, u64 *byte_count);
-+
-+/**
-+ * qman_ceetm_query_lfqmt - Query the logical frame queue mapping table
-+ * @lfqid: Logical Frame Queue ID
-+ * @lfqmt_query: Results of the query command
-+ *
-+ * Returns zero for success or -EIO if the query command returns error.
-+ *
-+ */
-+int qman_ceetm_query_lfqmt(int lfqid,
-+			   struct qm_mcr_ceetm_lfqmt_query *lfqmt_query);
-+
-+/**
-+ * qman_ceetm_query_write_statistics - Query (and optionally write) statistics
-+ * @cid: Target ID (CQID or CCGRID)
-+ * @dcp_idx: CEETM portal ID
-+ * @command_type: One of the following:
-+ *   0 = Query dequeue statistics. CID carries the CQID to be queried.
-+ *   1 = Query and clear dequeue statistics. CID carries the CQID to be queried
-+ *   2 = Write dequeue statistics. CID carries the CQID to be written.
-+ *   3 = Query reject statistics. CID carries the CCGRID to be queried.
-+ *   4 = Query and clear reject statistics. CID carries the CCGRID to be queried
-+ *   5 = Write reject statistics. CID carries the CCGRID to be written
-+ * @frame_count: Frame count value to be written if this is a write command
-+ * @byte_count: Bytes count value to be written if this is a write command
-+ *
-+ * Returns zero for success or -EIO if the query command returns error.
-+ */
-+int qman_ceetm_query_write_statistics(u16 cid, enum qm_dc_portal dcp_idx,
-+				      u16 command_type, u64 frame_count,
-+				      u64 byte_count);
-+
-+/**
-+ * qman_set_wpm - Set waterfall power management
-+ *
-+ * @wpm_enable: boolean, 1 = enable wpm, 0 = disable wpm.
-+ *
-+ * Return 0 for success, return -ENODEV if QMan misc_cfg register is not
-+ * accessible.
-+ */
-+int qman_set_wpm(int wpm_enable);
-+
-+/**
-+ * qman_get_wpm - Query the waterfall power management setting
-+ *
-+ * @wpm_enable: boolean, 1 = enable wpm, 0 = disable wpm.
-+ *
-+ * Return 0 for success, return -ENODEV if QMan misc_cfg register is not
-+ * accessible.
-+ */
-+int qman_get_wpm(int *wpm_enable);
-+
-+/* The below qman_p_***() variants might be called in a migration situation
-+ * (e.g. cpu hotplug). They are used to continue accessing the portal that
-+ * execution was affine to prior to migration.
-+ * @qman_portal specifies which portal the APIs will use.
-+*/
-+const struct qman_portal_config *qman_p_get_portal_config(struct qman_portal
-+									 *p);
-+int qman_p_irqsource_add(struct qman_portal *p, u32 bits);
-+int qman_p_irqsource_remove(struct qman_portal *p, u32 bits);
-+int qman_p_poll_dqrr(struct qman_portal *p, unsigned int limit);
-+u32 qman_p_poll_slow(struct qman_portal *p);
-+void qman_p_poll(struct qman_portal *p);
-+void qman_p_stop_dequeues(struct qman_portal *p);
-+void qman_p_start_dequeues(struct qman_portal *p);
-+void qman_p_static_dequeue_add(struct qman_portal *p, u32 pools);
-+void qman_p_static_dequeue_del(struct qman_portal *p, u32 pools);
-+u32 qman_p_static_dequeue_get(struct qman_portal *p);
-+void qman_p_dca(struct qman_portal *p, struct qm_dqrr_entry *dq,
-+						int park_request);
-+int qman_p_volatile_dequeue(struct qman_portal *p, struct qman_fq *fq,
-+				u32 flags __maybe_unused, u32 vdqcr);
-+int qman_p_enqueue(struct qman_portal *p, struct qman_fq *fq,
-+					const struct qm_fd *fd, u32 flags);
-+int qman_p_enqueue_orp(struct qman_portal *p, struct qman_fq *fq,
-+				const struct qm_fd *fd, u32 flags,
-+				struct qman_fq *orp, u16 orp_seqnum);
-+int qman_p_enqueue_precommit(struct qman_portal *p, struct qman_fq *fq,
-+				const struct qm_fd *fd, u32 flags,
-+				qman_cb_precommit cb, void *cb_arg);
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* FSL_QMAN_H */
---- /dev/null
-+++ b/include/linux/fsl_usdpaa.h
-@@ -0,0 +1,372 @@
-+/* Copyright 2011-2012 Freescale Semiconductor, Inc.
-+ *
-+ * This file is licensed under the terms of the GNU General Public License
-+ * version 2.  This program is licensed "as is" without any warranty of any
-+ * kind, whether express or implied.
-+ */
-+
-+#ifndef FSL_USDPAA_H
-+#define FSL_USDPAA_H
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+#include <linux/uaccess.h>
-+#include <linux/ioctl.h>
-+#include <linux/fsl_qman.h> /* For "enum qm_channel" */
-+#include <linux/compat.h>
-+
-+#ifdef CONFIG_FSL_USDPAA
-+
-+/******************************/
-+/* Allocation of resource IDs */
-+/******************************/
-+
-+/* This enum is used to distinguish between the type of underlying object being
-+ * manipulated. */
-+enum usdpaa_id_type {
-+	usdpaa_id_fqid,
-+	usdpaa_id_bpid,
-+	usdpaa_id_qpool,
-+	usdpaa_id_cgrid,
-+	usdpaa_id_ceetm0_lfqid,
-+	usdpaa_id_ceetm0_channelid,
-+	usdpaa_id_ceetm1_lfqid,
-+	usdpaa_id_ceetm1_channelid,
-+	usdpaa_id_max /* <-- not a valid type, represents the number of types */
-+};
-+#define USDPAA_IOCTL_MAGIC 'u'
-+struct usdpaa_ioctl_id_alloc {
-+	uint32_t base; /* Return value, the start of the allocated range */
-+	enum usdpaa_id_type id_type; /* what kind of resource(s) to allocate */
-+	uint32_t num; /* how many IDs to allocate (and return value) */
-+	uint32_t align; /* must be a power of 2, 0 is treated like 1 */
-+	int partial; /* whether to allow less than 'num' */
-+};
-+struct usdpaa_ioctl_id_release {
-+	/* Input; */
-+	enum usdpaa_id_type id_type;
-+	uint32_t base;
-+	uint32_t num;
-+};
-+struct usdpaa_ioctl_id_reserve {
-+	enum usdpaa_id_type id_type;
-+	uint32_t base;
-+	uint32_t num;
-+};
-+
-+
-+/* ioctl() commands */
-+#define USDPAA_IOCTL_ID_ALLOC \
-+	_IOWR(USDPAA_IOCTL_MAGIC, 0x01, struct usdpaa_ioctl_id_alloc)
-+#define USDPAA_IOCTL_ID_RELEASE \
-+	_IOW(USDPAA_IOCTL_MAGIC, 0x02, struct usdpaa_ioctl_id_release)
-+#define USDPAA_IOCTL_ID_RESERVE \
-+	_IOW(USDPAA_IOCTL_MAGIC, 0x0A, struct usdpaa_ioctl_id_reserve)
-+
-+/**********************/
-+/* Mapping DMA memory */
-+/**********************/
-+
-+/* Maximum length for a map name, including NULL-terminator */
-+#define USDPAA_DMA_NAME_MAX 16
-+/* Flags for requesting DMA maps. Maps are private+unnamed or sharable+named.
-+ * For a sharable and named map, specify _SHARED (whether creating one or
-+ * binding to an existing one). If _SHARED is specified and _CREATE is not, then
-+ * the mapping must already exist. If _SHARED and _CREATE are specified and the
-+ * mapping doesn't already exist, it will be created. If _SHARED and _CREATE are
-+ * specified and the mapping already exists, the mapping will fail unless _LAZY
-+ * is specified. When mapping to a pre-existing sharable map, the length must be
-+ * an exact match. Lengths must be a power-of-4 multiple of page size.
-+ *
-+ * Note that this does not actually map the memory to user-space, that is done
-+ * by a subsequent mmap() using the page offset returned from this ioctl(). The
-+ * ioctl() is what gives the process permission to do this, and a page-offset
-+ * with which to do so.
-+ */
-+#define USDPAA_DMA_FLAG_SHARE    0x01
-+#define USDPAA_DMA_FLAG_CREATE   0x02
-+#define USDPAA_DMA_FLAG_LAZY     0x04
-+#define USDPAA_DMA_FLAG_RDONLY   0x08
-+struct usdpaa_ioctl_dma_map {
-+	/* Output parameters - virtual and physical addresses */
-+	void *ptr;
-+	uint64_t phys_addr;
-+	/* Input parameter, the length of the region to be created (or if
-+	 * mapping an existing region, this must match it). Must be a power-of-4
-+	 * multiple of page size. */
-+	uint64_t len;
-+	/* Input parameter, the USDPAA_DMA_FLAG_* settings. */
-+	uint32_t flags;
-+	/* If _FLAG_SHARE is specified, the name of the region to be created (or
-+	 * of the existing mapping to use). */
-+	char name[USDPAA_DMA_NAME_MAX];
-+	/* If this ioctl() creates the mapping, this is an input parameter
-+	 * stating whether the region supports locking. If mapping an existing
-+	 * region, this is a return value indicating the same thing. */
-+	int has_locking;
-+	/* In the case of a successful map with _CREATE and _LAZY, this return
-+	 * value indicates whether we created the mapped region or whether it
-+	 * already existed. */
-+	int did_create;
-+};
-+
-+#ifdef CONFIG_COMPAT
-+struct usdpaa_ioctl_dma_map_compat {
-+	/* Output parameters - virtual and physical addresses */
-+	compat_uptr_t ptr;
-+	uint64_t phys_addr;
-+	/* Input parameter, the length of the region to be created (or if
-+	 * mapping an existing region, this must match it). Must be a power-of-4
-+	 * multiple of page size. */
-+	uint64_t len;
-+	/* Input parameter, the USDPAA_DMA_FLAG_* settings. */
-+	uint32_t flags;
-+	/* If _FLAG_SHARE is specified, the name of the region to be created (or
-+	 * of the existing mapping to use). */
-+	char name[USDPAA_DMA_NAME_MAX];
-+	/* If this ioctl() creates the mapping, this is an input parameter
-+	 * stating whether the region supports locking. If mapping an existing
-+	 * region, this is a return value indicating the same thing. */
-+	int has_locking;
-+	/* In the case of a successful map with _CREATE and _LAZY, this return
-+	 * value indicates whether we created the mapped region or whether it
-+	 * already existed. */
-+	int did_create;
-+};
-+
-+#define USDPAA_IOCTL_DMA_MAP_COMPAT \
-+	_IOWR(USDPAA_IOCTL_MAGIC, 0x03, struct usdpaa_ioctl_dma_map_compat)
-+#endif
-+
-+
-+#define USDPAA_IOCTL_DMA_MAP \
-+	_IOWR(USDPAA_IOCTL_MAGIC, 0x03, struct usdpaa_ioctl_dma_map)
-+/* munmap() does not remove the DMA map, just the user-space mapping to it.
-+ * This ioctl will do both (though you can munmap() before calling the ioctl
-+ * too). */
-+#define USDPAA_IOCTL_DMA_UNMAP \
-+	_IOW(USDPAA_IOCTL_MAGIC, 0x04, unsigned char)
-+/* We implement a cross-process locking scheme per DMA map. Call this ioctl()
-+ * with a mmap()'d address, and the process will (interruptible) sleep if the
-+ * lock is already held by another process. Process destruction will
-+ * automatically clean up any held locks. */
-+#define USDPAA_IOCTL_DMA_LOCK \
-+	_IOW(USDPAA_IOCTL_MAGIC, 0x05, unsigned char)
-+#define USDPAA_IOCTL_DMA_UNLOCK \
-+	_IOW(USDPAA_IOCTL_MAGIC, 0x06, unsigned char)
-+
-+/***************************************/
-+/* Mapping and using QMan/BMan portals */
-+/***************************************/
-+enum usdpaa_portal_type {
-+	 usdpaa_portal_qman,
-+	 usdpaa_portal_bman,
-+};
-+
-+#define QBMAN_ANY_PORTAL_IDX 0xffffffff
-+
-+struct usdpaa_ioctl_portal_map {
-+	/* Input parameter, is a qman or bman portal required. */
-+
-+	enum usdpaa_portal_type type;
-+	/* Specifes a specific portal index to map or QBMAN_ANY_PORTAL_IDX
-+	   for don't care.  The portal index will be populated by the
-+	   driver when the ioctl() successfully completes */
-+	uint32_t index;
-+
-+	/* Return value if the map succeeds, this gives the mapped
-+	 * cache-inhibited (cinh) and cache-enabled (cena) addresses. */
-+	struct usdpaa_portal_map {
-+		void *cinh;
-+		void *cena;
-+	} addr;
-+	/* Qman-specific return values */
-+	uint16_t channel;
-+	uint32_t pools;
-+};
-+
-+#ifdef CONFIG_COMPAT
-+struct compat_usdpaa_ioctl_portal_map {
-+	/* Input parameter, is a qman or bman portal required. */
-+	enum usdpaa_portal_type type;
-+	/* Specifes a specific portal index to map or QBMAN_ANY_PORTAL_IDX
-+	   for don't care.  The portal index will be populated by the
-+	   driver when the ioctl() successfully completes */
-+	uint32_t index;
-+	/* Return value if the map succeeds, this gives the mapped
-+	 * cache-inhibited (cinh) and cache-enabled (cena) addresses. */
-+	struct usdpaa_portal_map_compat {
-+		compat_uptr_t cinh;
-+		compat_uptr_t cena;
-+	} addr;
-+	/* Qman-specific return values */
-+	uint16_t channel;
-+	uint32_t pools;
-+};
-+#define USDPAA_IOCTL_PORTAL_MAP_COMPAT \
-+	_IOWR(USDPAA_IOCTL_MAGIC, 0x07, struct compat_usdpaa_ioctl_portal_map)
-+#define USDPAA_IOCTL_PORTAL_UNMAP_COMPAT \
-+	_IOW(USDPAA_IOCTL_MAGIC, 0x08, struct usdpaa_portal_map_compat)
-+#endif
-+
-+#define USDPAA_IOCTL_PORTAL_MAP \
-+	_IOWR(USDPAA_IOCTL_MAGIC, 0x07, struct usdpaa_ioctl_portal_map)
-+#define USDPAA_IOCTL_PORTAL_UNMAP \
-+	_IOW(USDPAA_IOCTL_MAGIC, 0x08, struct usdpaa_portal_map)
-+
-+struct usdpaa_ioctl_irq_map {
-+	enum usdpaa_portal_type type; /* Type of portal to map */
-+	int fd; /* File descriptor that contains the portal */
-+	void *portal_cinh; /* Cache inhibited area to identify the portal */
-+};
-+
-+#define USDPAA_IOCTL_PORTAL_IRQ_MAP \
-+	_IOW(USDPAA_IOCTL_MAGIC, 0x09, struct usdpaa_ioctl_irq_map)
-+
-+#ifdef CONFIG_COMPAT
-+
-+struct compat_ioctl_irq_map {
-+	enum usdpaa_portal_type type; /* Type of portal to map */
-+	compat_int_t fd; /* File descriptor that contains the portal */
-+	compat_uptr_t portal_cinh; /* Used identify the portal */};
-+
-+#define USDPAA_IOCTL_PORTAL_IRQ_MAP_COMPAT \
-+	_IOW(USDPAA_IOCTL_MAGIC, 0x09, struct compat_ioctl_irq_map)
-+#endif
-+
-+/* ioctl to query the amount of DMA memory used in the system */
-+struct usdpaa_ioctl_dma_used {
-+	uint64_t free_bytes;
-+	uint64_t total_bytes;
-+};
-+#define USDPAA_IOCTL_DMA_USED \
-+	_IOR(USDPAA_IOCTL_MAGIC, 0x0B, struct usdpaa_ioctl_dma_used)
-+
-+/* ioctl to allocate a raw portal */
-+struct usdpaa_ioctl_raw_portal {
-+	/* inputs */
-+	enum usdpaa_portal_type type; /* Type of portal to allocate */
-+
-+	 /* set to non zero to turn on stashing */
-+	uint8_t enable_stash;
-+	/* Stashing attributes for the portal */
-+	uint32_t cpu;
-+	uint32_t cache;
-+	uint32_t window;
-+
-+	/* Specifies the stash request queue this portal should use */
-+	uint8_t sdest;
-+
-+	/* Specifes a specific portal index to map or QBMAN_ANY_PORTAL_IDX
-+	 * for don't care.  The portal index will be populated by the
-+	 * driver when the ioctl() successfully completes */
-+	uint32_t index;
-+
-+	/* outputs */
-+	uint64_t cinh;
-+	uint64_t cena;
-+};
-+
-+#define USDPAA_IOCTL_ALLOC_RAW_PORTAL \
-+	_IOWR(USDPAA_IOCTL_MAGIC, 0x0C, struct usdpaa_ioctl_raw_portal)
-+
-+#define USDPAA_IOCTL_FREE_RAW_PORTAL \
-+	_IOR(USDPAA_IOCTL_MAGIC, 0x0D, struct usdpaa_ioctl_raw_portal)
-+
-+#ifdef CONFIG_COMPAT
-+
-+struct compat_ioctl_raw_portal {
-+	/* inputs */
-+	enum usdpaa_portal_type type; /* Type of portal to allocate */
-+
-+	 /* set to non zero to turn on stashing */
-+	uint8_t enable_stash;
-+	/* Stashing attributes for the portal */
-+	uint32_t cpu;
-+	uint32_t cache;
-+	uint32_t window;
-+	/* Specifies the stash request queue this portal should use */
-+	uint8_t sdest;
-+
-+	/* Specifes a specific portal index to map or QBMAN_ANY_PORTAL_IDX
-+	 * for don't care.  The portal index will be populated by the
-+	 * driver when the ioctl() successfully completes */
-+	uint32_t index;
-+
-+	/* outputs */
-+	uint64_t cinh;
-+	uint64_t cena;
-+};
-+
-+#define USDPAA_IOCTL_ALLOC_RAW_PORTAL_COMPAT \
-+	_IOWR(USDPAA_IOCTL_MAGIC, 0x0C, struct compat_ioctl_raw_portal)
-+
-+#define USDPAA_IOCTL_FREE_RAW_PORTAL_COMPAT \
-+	_IOR(USDPAA_IOCTL_MAGIC, 0x0D, struct compat_ioctl_raw_portal)
-+
-+#endif
-+
-+#ifdef __KERNEL__
-+
-+/* Early-boot hook */
-+int __init fsl_usdpaa_init_early(void);
-+
-+/* Fault-handling in arch/powerpc/mm/mem.c gives USDPAA an opportunity to detect
-+ * faults within its ranges via this hook. */
-+int usdpaa_test_fault(unsigned long pfn, u64 *phys_addr, u64 *size);
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* CONFIG_FSL_USDPAA */
-+
-+#ifdef __KERNEL__
-+/* This interface is needed in a few places and though it's not specific to
-+ * USDPAA as such, creating a new header for it doesn't make any sense. The
-+ * qbman kernel driver implements this interface and uses it as the backend for
-+ * both the FQID and BPID allocators. The fsl_usdpaa driver also uses this
-+ * interface for tracking per-process allocations handed out to user-space. */
-+struct dpa_alloc {
-+	struct list_head free;
-+	spinlock_t lock;
-+	struct list_head used;
-+};
-+#define DECLARE_DPA_ALLOC(name) \
-+	struct dpa_alloc name = { \
-+		.free = { \
-+			.prev = &name.free, \
-+			.next = &name.free \
-+		}, \
-+		.lock = __SPIN_LOCK_UNLOCKED(name.lock), \
-+		.used = { \
-+			 .prev = &name.used, \
-+			 .next = &name.used \
-+		 } \
-+	}
-+static inline void dpa_alloc_init(struct dpa_alloc *alloc)
-+{
-+	INIT_LIST_HEAD(&alloc->free);
-+	INIT_LIST_HEAD(&alloc->used);
-+	spin_lock_init(&alloc->lock);
-+}
-+int dpa_alloc_new(struct dpa_alloc *alloc, u32 *result, u32 count, u32 align,
-+		  int partial);
-+void dpa_alloc_free(struct dpa_alloc *alloc, u32 base_id, u32 count);
-+void dpa_alloc_seed(struct dpa_alloc *alloc, u32 fqid, u32 count);
-+
-+/* Like 'new' but specifies the desired range, returns -ENOMEM if the entire
-+ * desired range is not available, or 0 for success. */
-+int dpa_alloc_reserve(struct dpa_alloc *alloc, u32 base_id, u32 count);
-+/* Pops and returns contiguous ranges from the allocator. Returns -ENOMEM when
-+ * 'alloc' is empty. */
-+int dpa_alloc_pop(struct dpa_alloc *alloc, u32 *result, u32 *count);
-+/* Returns 1 if the specified id is alloced, 0 otherwise */
-+int dpa_alloc_check(struct dpa_alloc *list, u32 id);
-+#endif /* __KERNEL__ */
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* FSL_USDPAA_H */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0008-fmd-SDK-DPAA-1.x-FMan-driver.patch b/target/linux/layerscape/patches-5.4/701-net-0008-fmd-SDK-DPAA-1.x-FMan-driver.patch
deleted file mode 100644
index 6401ba14be..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0008-fmd-SDK-DPAA-1.x-FMan-driver.patch
+++ /dev/null
@@ -1,116456 +0,0 @@
-From 2701a01f8da8321d3fb8b2e99240fbc5c093a27b Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Wed, 10 May 2017 16:36:36 +0300
-Subject: [PATCH] fmd: SDK DPAA 1.x FMan driver
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_fman/Kconfig    |  153 +
- drivers/net/ethernet/freescale/sdk_fman/Makefile   |   11 +
- .../freescale/sdk_fman/Peripherals/FM/HC/Makefile  |   15 +
- .../freescale/sdk_fman/Peripherals/FM/HC/hc.c      | 1232 ++++
- .../freescale/sdk_fman/Peripherals/FM/MAC/Makefile |   28 +
- .../freescale/sdk_fman/Peripherals/FM/MAC/dtsec.c  | 1464 ++++
- .../freescale/sdk_fman/Peripherals/FM/MAC/dtsec.h  |  228 +
- .../sdk_fman/Peripherals/FM/MAC/dtsec_mii_acc.c    |   97 +
- .../sdk_fman/Peripherals/FM/MAC/dtsec_mii_acc.h    |   42 +
- .../freescale/sdk_fman/Peripherals/FM/MAC/fm_mac.c |  658 ++
- .../freescale/sdk_fman/Peripherals/FM/MAC/fm_mac.h |  225 +
- .../sdk_fman/Peripherals/FM/MAC/fman_crc32.c       |  119 +
- .../sdk_fman/Peripherals/FM/MAC/fman_crc32.h       |   43 +
- .../sdk_fman/Peripherals/FM/MAC/fman_dtsec.c       |  845 +++
- .../Peripherals/FM/MAC/fman_dtsec_mii_acc.c        |  163 +
- .../sdk_fman/Peripherals/FM/MAC/fman_memac.c       |  511 ++
- .../Peripherals/FM/MAC/fman_memac_mii_acc.c        |  213 +
- .../sdk_fman/Peripherals/FM/MAC/fman_tgec.c        |  367 +
- .../freescale/sdk_fman/Peripherals/FM/MAC/memac.c  | 1096 +++
- .../freescale/sdk_fman/Peripherals/FM/MAC/memac.h  |  110 +
- .../sdk_fman/Peripherals/FM/MAC/memac_mii_acc.c    |   78 +
- .../sdk_fman/Peripherals/FM/MAC/memac_mii_acc.h    |   73 +
- .../freescale/sdk_fman/Peripherals/FM/MAC/tgec.c   |  975 +++
- .../freescale/sdk_fman/Peripherals/FM/MAC/tgec.h   |  151 +
- .../sdk_fman/Peripherals/FM/MAC/tgec_mii_acc.c     |  139 +
- .../sdk_fman/Peripherals/FM/MAC/tgec_mii_acc.h     |   80 +
- .../sdk_fman/Peripherals/FM/MACSEC/Makefile        |   15 +
- .../sdk_fman/Peripherals/FM/MACSEC/fm_macsec.c     |  237 +
- .../sdk_fman/Peripherals/FM/MACSEC/fm_macsec.h     |  203 +
- .../Peripherals/FM/MACSEC/fm_macsec_guest.c        |   59 +
- .../Peripherals/FM/MACSEC/fm_macsec_master.c       | 1031 +++
- .../Peripherals/FM/MACSEC/fm_macsec_master.h       |  479 ++
- .../Peripherals/FM/MACSEC/fm_macsec_secy.c         |  883 +++
- .../Peripherals/FM/MACSEC/fm_macsec_secy.h         |  144 +
- .../freescale/sdk_fman/Peripherals/FM/Makefile     |   23 +
- .../freescale/sdk_fman/Peripherals/FM/Pcd/Makefile |   26 +
- .../freescale/sdk_fman/Peripherals/FM/Pcd/crc64.h  |  360 +
- .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_cc.c  | 7582 ++++++++++++++++++++
- .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_cc.h  |  399 +
- .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.c  | 3242 +++++++++
- .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.h  |  206 +
- .../sdk_fman/Peripherals/FM/Pcd/fm_manip.c         | 5571 ++++++++++++++
- .../sdk_fman/Peripherals/FM/Pcd/fm_manip.h         |  555 ++
- .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_pcd.c | 2095 ++++++
- .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_pcd.h |  543 ++
- .../sdk_fman/Peripherals/FM/Pcd/fm_pcd_ipc.h       |  280 +
- .../sdk_fman/Peripherals/FM/Pcd/fm_plcr.c          | 1847 +++++
- .../sdk_fman/Peripherals/FM/Pcd/fm_plcr.h          |  165 +
- .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_prs.c |  423 ++
- .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_prs.h |  316 +
- .../sdk_fman/Peripherals/FM/Pcd/fm_replic.c        |  984 +++
- .../sdk_fman/Peripherals/FM/Pcd/fm_replic.h        |  101 +
- .../sdk_fman/Peripherals/FM/Pcd/fman_kg.c          |  888 +++
- .../sdk_fman/Peripherals/FM/Pcd/fman_prs.c         |  129 +
- .../sdk_fman/Peripherals/FM/Port/Makefile          |   15 +
- .../sdk_fman/Peripherals/FM/Port/fm_port.c         | 6436 +++++++++++++++++
- .../sdk_fman/Peripherals/FM/Port/fm_port.h         |  999 +++
- .../sdk_fman/Peripherals/FM/Port/fm_port_dsar.h    |  494 ++
- .../sdk_fman/Peripherals/FM/Port/fm_port_im.c      |  753 ++
- .../sdk_fman/Peripherals/FM/Port/fman_port.c       | 1568 ++++
- .../freescale/sdk_fman/Peripherals/FM/Rtc/Makefile |   15 +
- .../freescale/sdk_fman/Peripherals/FM/Rtc/fm_rtc.c |  692 ++
- .../freescale/sdk_fman/Peripherals/FM/Rtc/fm_rtc.h |   96 +
- .../sdk_fman/Peripherals/FM/Rtc/fman_rtc.c         |  334 +
- .../freescale/sdk_fman/Peripherals/FM/SP/Makefile  |   15 +
- .../freescale/sdk_fman/Peripherals/FM/SP/fm_sp.c   |  757 ++
- .../freescale/sdk_fman/Peripherals/FM/SP/fm_sp.h   |   85 +
- .../freescale/sdk_fman/Peripherals/FM/SP/fman_sp.c |  197 +
- .../freescale/sdk_fman/Peripherals/FM/fm.c         | 5216 ++++++++++++++
- .../freescale/sdk_fman/Peripherals/FM/fm.h         |  648 ++
- .../freescale/sdk_fman/Peripherals/FM/fm_ipc.h     |  465 ++
- .../freescale/sdk_fman/Peripherals/FM/fm_muram.c   |  174 +
- .../freescale/sdk_fman/Peripherals/FM/fman.c       | 1398 ++++
- .../sdk_fman/Peripherals/FM/inc/fm_common.h        | 1214 ++++
- .../freescale/sdk_fman/Peripherals/FM/inc/fm_hc.h  |   93 +
- .../sdk_fman/Peripherals/FM/inc/fm_sp_common.h     |  117 +
- .../net/ethernet/freescale/sdk_fman/etc/Makefile   |   12 +
- .../net/ethernet/freescale/sdk_fman/etc/error.c    |   95 +
- drivers/net/ethernet/freescale/sdk_fman/etc/list.c |   71 +
- .../net/ethernet/freescale/sdk_fman/etc/memcpy.c   |  620 ++
- drivers/net/ethernet/freescale/sdk_fman/etc/mm.c   | 1155 +++
- drivers/net/ethernet/freescale/sdk_fman/etc/mm.h   |  105 +
- .../net/ethernet/freescale/sdk_fman/etc/sprint.c   |   81 +
- .../ethernet/freescale/sdk_fman/fmanv3h_dflags.h   |   57 +
- .../ethernet/freescale/sdk_fman/fmanv3l_dflags.h   |   56 +
- .../sdk_fman/inc/Peripherals/crc_mac_addr_ext.h    |  364 +
- .../freescale/sdk_fman/inc/Peripherals/dpaa_ext.h  |  210 +
- .../freescale/sdk_fman/inc/Peripherals/fm_ext.h    | 1731 +++++
- .../sdk_fman/inc/Peripherals/fm_mac_ext.h          |  859 +++
- .../sdk_fman/inc/Peripherals/fm_macsec_ext.h       | 1271 ++++
- .../sdk_fman/inc/Peripherals/fm_muram_ext.h        |  170 +
- .../sdk_fman/inc/Peripherals/fm_pcd_ext.h          | 3974 ++++++++++
- .../sdk_fman/inc/Peripherals/fm_port_ext.h         | 2608 +++++++
- .../sdk_fman/inc/Peripherals/fm_rtc_ext.h          |  619 ++
- .../sdk_fman/inc/Peripherals/fm_vsp_ext.h          |  411 ++
- .../sdk_fman/inc/Peripherals/mii_acc_ext.h         |   76 +
- .../net/ethernet/freescale/sdk_fman/inc/core_ext.h |   90 +
- .../freescale/sdk_fman/inc/cores/arm_ext.h         |   55 +
- .../freescale/sdk_fman/inc/cores/e500v2_ext.h      |  476 ++
- .../freescale/sdk_fman/inc/cores/ppc_ext.h         |  141 +
- .../ethernet/freescale/sdk_fman/inc/ddr_std_ext.h  |   77 +
- .../ethernet/freescale/sdk_fman/inc/debug_ext.h    |  233 +
- .../ethernet/freescale/sdk_fman/inc/endian_ext.h   |  447 ++
- .../net/ethernet/freescale/sdk_fman/inc/enet_ext.h |  205 +
- .../ethernet/freescale/sdk_fman/inc/error_ext.h    |  529 ++
- .../ethernet/freescale/sdk_fman/inc/etc/list_ext.h |  358 +
- .../ethernet/freescale/sdk_fman/inc/etc/mem_ext.h  |  318 +
- .../freescale/sdk_fman/inc/etc/memcpy_ext.h        |  208 +
- .../ethernet/freescale/sdk_fman/inc/etc/mm_ext.h   |  310 +
- .../freescale/sdk_fman/inc/etc/sprint_ext.h        |  118 +
- .../sdk_fman/inc/flib/common/arch/ppc_access.h     |   37 +
- .../freescale/sdk_fman/inc/flib/common/general.h   |   52 +
- .../freescale/sdk_fman/inc/flib/fman_common.h      |   78 +
- .../freescale/sdk_fman/inc/flib/fsl_enet.h         |  273 +
- .../freescale/sdk_fman/inc/flib/fsl_fman.h         |  825 +++
- .../freescale/sdk_fman/inc/flib/fsl_fman_dtsec.h   | 1096 +++
- .../sdk_fman/inc/flib/fsl_fman_dtsec_mii_acc.h     |  107 +
- .../freescale/sdk_fman/inc/flib/fsl_fman_kg.h      |  514 ++
- .../freescale/sdk_fman/inc/flib/fsl_fman_memac.h   |  427 ++
- .../sdk_fman/inc/flib/fsl_fman_memac_mii_acc.h     |   78 +
- .../freescale/sdk_fman/inc/flib/fsl_fman_port.h    |  593 ++
- .../freescale/sdk_fman/inc/flib/fsl_fman_prs.h     |  102 +
- .../freescale/sdk_fman/inc/flib/fsl_fman_rtc.h     |  449 ++
- .../freescale/sdk_fman/inc/flib/fsl_fman_sp.h      |  138 +
- .../freescale/sdk_fman/inc/flib/fsl_fman_tgec.h    |  479 ++
- .../integrations/FMANV3H/dpaa_integration_ext.h    |  291 +
- .../sdk_fman/inc/integrations/FMANV3H/part_ext.h   |   71 +
- .../integrations/FMANV3H/part_integration_ext.h    |  304 +
- .../integrations/FMANV3L/dpaa_integration_ext.h    |  293 +
- .../sdk_fman/inc/integrations/FMANV3L/part_ext.h   |   59 +
- .../integrations/FMANV3L/part_integration_ext.h    |  304 +
- .../inc/integrations/LS1043/dpaa_integration_ext.h |  291 +
- .../sdk_fman/inc/integrations/LS1043/part_ext.h    |   64 +
- .../inc/integrations/LS1043/part_integration_ext.h |  185 +
- .../inc/integrations/P1023/dpaa_integration_ext.h  |  213 +
- .../sdk_fman/inc/integrations/P1023/part_ext.h     |   82 +
- .../inc/integrations/P1023/part_integration_ext.h  |  635 ++
- .../P3040_P4080_P5020/dpaa_integration_ext.h       |  276 +
- .../inc/integrations/P3040_P4080_P5020/part_ext.h  |   83 +
- .../P3040_P4080_P5020/part_integration_ext.h       |  336 +
- .../net/ethernet/freescale/sdk_fman/inc/math_ext.h |  100 +
- .../net/ethernet/freescale/sdk_fman/inc/ncsw_ext.h |  435 ++
- .../net/ethernet/freescale/sdk_fman/inc/net_ext.h  |  430 ++
- .../net/ethernet/freescale/sdk_fman/inc/std_ext.h  |   48 +
- .../ethernet/freescale/sdk_fman/inc/stdarg_ext.h   |   49 +
- .../ethernet/freescale/sdk_fman/inc/stdlib_ext.h   |  162 +
- .../ethernet/freescale/sdk_fman/inc/string_ext.h   |   56 +
- .../ethernet/freescale/sdk_fman/inc/types_ext.h    |   62 +
- .../ethernet/freescale/sdk_fman/inc/xx_common.h    |   56 +
- .../net/ethernet/freescale/sdk_fman/inc/xx_ext.h   |  791 ++
- .../ethernet/freescale/sdk_fman/ls1043_dflags.h    |   56 +
- .../net/ethernet/freescale/sdk_fman/ncsw_config.mk |   53 +
- .../net/ethernet/freescale/sdk_fman/p1023_dflags.h |   65 +
- .../freescale/sdk_fman/p3040_4080_5020_dflags.h    |   62 +
- .../net/ethernet/freescale/sdk_fman/src/Makefile   |   11 +
- .../freescale/sdk_fman/src/inc/system/sys_ext.h    |  118 +
- .../freescale/sdk_fman/src/inc/system/sys_io_ext.h |   46 +
- .../freescale/sdk_fman/src/inc/types_linux.h       |  208 +
- .../sdk_fman/src/inc/wrapper/fsl_fman_test.h       |   84 +
- .../sdk_fman/src/inc/wrapper/lnxwrp_exp_sym.h      |  128 +
- .../sdk_fman/src/inc/wrapper/lnxwrp_fm_ext.h       |  163 +
- .../sdk_fman/src/inc/wrapper/lnxwrp_fsl_fman.h     |  921 +++
- .../ethernet/freescale/sdk_fman/src/inc/xx/xx.h    |   50 +
- .../freescale/sdk_fman/src/system/Makefile         |   10 +
- .../freescale/sdk_fman/src/system/sys_io.c         |  171 +
- .../freescale/sdk_fman/src/wrapper/Makefile        |   19 +
- .../freescale/sdk_fman/src/wrapper/fman_test.c     | 1665 +++++
- .../freescale/sdk_fman/src/wrapper/lnxwrp_fm.c     | 2908 ++++++++
- .../freescale/sdk_fman/src/wrapper/lnxwrp_fm.h     |  294 +
- .../sdk_fman/src/wrapper/lnxwrp_fm_port.c          | 1480 ++++
- .../sdk_fman/src/wrapper/lnxwrp_ioctls_fm.c        | 4813 +++++++++++++
- .../sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.c | 1297 ++++
- .../sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.h |  755 ++
- .../sdk_fman/src/wrapper/lnxwrp_resources.h        |  121 +
- .../sdk_fman/src/wrapper/lnxwrp_resources_ut.c     |  191 +
- .../sdk_fman/src/wrapper/lnxwrp_resources_ut.h     |  144 +
- .../sdk_fman/src/wrapper/lnxwrp_resources_ut.make  |   28 +
- .../freescale/sdk_fman/src/wrapper/lnxwrp_sysfs.c  |   60 +
- .../freescale/sdk_fman/src/wrapper/lnxwrp_sysfs.h  |   60 +
- .../sdk_fman/src/wrapper/lnxwrp_sysfs_fm.c         | 1855 +++++
- .../sdk_fman/src/wrapper/lnxwrp_sysfs_fm.h         |  136 +
- .../sdk_fman/src/wrapper/lnxwrp_sysfs_fm_port.c    | 1268 ++++
- .../sdk_fman/src/wrapper/lnxwrp_sysfs_fm_port.h    |   56 +
- .../ethernet/freescale/sdk_fman/src/xx/Makefile    |   18 +
- .../freescale/sdk_fman/src/xx/module_strings.c     |   46 +
- .../freescale/sdk_fman/src/xx/xx_arm_linux.c       |  905 +++
- .../ethernet/freescale/sdk_fman/src/xx/xx_linux.c  |  918 +++
- include/linux/fsl/svr.h                            |   97 +
- include/uapi/linux/fmd/Kbuild                      |    5 +
- include/uapi/linux/fmd/Peripherals/Kbuild          |    4 +
- include/uapi/linux/fmd/Peripherals/fm_ioctls.h     |  628 ++
- include/uapi/linux/fmd/Peripherals/fm_pcd_ioctls.h | 3084 ++++++++
- .../uapi/linux/fmd/Peripherals/fm_port_ioctls.h    |  948 +++
- .../uapi/linux/fmd/Peripherals/fm_test_ioctls.h    |  208 +
- include/uapi/linux/fmd/integrations/Kbuild         |    1 +
- .../linux/fmd/integrations/integration_ioctls.h    |   56 +
- include/uapi/linux/fmd/ioctls.h                    |   96 +
- include/uapi/linux/fmd/net_ioctls.h                |  430 ++
- 198 files changed, 115457 insertions(+)
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Kconfig
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Makefile
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/HC/Makefile
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/HC/hc.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/Makefile
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/dtsec.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/dtsec.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/dtsec_mii_acc.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/dtsec_mii_acc.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fm_mac.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fm_mac.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_crc32.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_crc32.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_dtsec.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_dtsec_mii_acc.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_memac.c
- create mode 100755 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_memac_mii_acc.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_tgec.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac_mii_acc.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac_mii_acc.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/tgec.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/tgec.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/tgec_mii_acc.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/tgec_mii_acc.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/Makefile
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/fm_macsec.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/fm_macsec.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/fm_macsec_guest.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/fm_macsec_master.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/fm_macsec_master.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/fm_macsec_secy.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/fm_macsec_secy.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Makefile
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/Makefile
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/crc64.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_cc.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_cc.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_manip.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_manip.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_pcd.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_pcd.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_pcd_ipc.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_plcr.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_plcr.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_prs.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_prs.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_replic.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_replic.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fman_kg.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fman_prs.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/Makefile
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.h
- create mode 100755 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port_dsar.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port_im.c
- create mode 100755 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fman_port.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Rtc/Makefile
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Rtc/fm_rtc.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Rtc/fm_rtc.h
- create mode 100755 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Rtc/fman_rtc.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/SP/Makefile
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/SP/fm_sp.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/SP/fm_sp.h
- create mode 100755 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/SP/fman_sp.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm_ipc.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm_muram.c
- create mode 100755 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fman.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/inc/fm_common.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/inc/fm_hc.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/inc/fm_sp_common.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/etc/Makefile
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/etc/error.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/etc/list.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/etc/memcpy.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/etc/mm.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/etc/mm.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/etc/sprint.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/fmanv3h_dflags.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/fmanv3l_dflags.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/crc_mac_addr_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/dpaa_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_mac_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_macsec_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_muram_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_pcd_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_port_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_rtc_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_vsp_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/mii_acc_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/core_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/cores/arm_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/cores/e500v2_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/cores/ppc_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/ddr_std_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/debug_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/endian_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/enet_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/error_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/etc/list_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/etc/mem_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/etc/memcpy_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/etc/mm_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/etc/sprint_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/flib/common/arch/ppc_access.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/flib/common/general.h
- create mode 100755 drivers/net/ethernet/freescale/sdk_fman/inc/flib/fman_common.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_enet.h
- create mode 100755 drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_dtsec.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_dtsec_mii_acc.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_kg.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_memac.h
- create mode 100755 drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_memac_mii_acc.h
- create mode 100755 drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_port.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_prs.h
- create mode 100755 drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_rtc.h
- create mode 100755 drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_sp.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_tgec.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/integrations/FMANV3H/dpaa_integration_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/integrations/FMANV3H/part_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/integrations/FMANV3H/part_integration_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/integrations/FMANV3L/dpaa_integration_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/integrations/FMANV3L/part_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/integrations/FMANV3L/part_integration_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/integrations/LS1043/dpaa_integration_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/integrations/LS1043/part_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/integrations/LS1043/part_integration_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/integrations/P1023/dpaa_integration_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/integrations/P1023/part_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/integrations/P1023/part_integration_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/integrations/P3040_P4080_P5020/dpaa_integration_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/integrations/P3040_P4080_P5020/part_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/integrations/P3040_P4080_P5020/part_integration_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/math_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/ncsw_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/net_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/std_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/stdarg_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/stdlib_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/string_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/types_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/xx_common.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/inc/xx_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/ls1043_dflags.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/p1023_dflags.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/p3040_4080_5020_dflags.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/Makefile
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/inc/system/sys_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/inc/system/sys_io_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/inc/types_linux.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/fsl_fman_test.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/lnxwrp_exp_sym.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/lnxwrp_fm_ext.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/lnxwrp_fsl_fman.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/inc/xx/xx.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/system/Makefile
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/system/sys_io.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/Makefile
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/fman_test.c
- create mode 100755 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm_port.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_resources.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_resources_ut.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_resources_ut.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_resources_ut.make
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs_fm.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs_fm.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs_fm_port.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs_fm_port.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/xx/Makefile
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/xx/module_strings.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/xx/xx_arm_linux.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_fman/src/xx/xx_linux.c
- create mode 100644 include/linux/fsl/svr.h
- create mode 100644 include/uapi/linux/fmd/Kbuild
- create mode 100644 include/uapi/linux/fmd/Peripherals/Kbuild
- create mode 100644 include/uapi/linux/fmd/Peripherals/fm_ioctls.h
- create mode 100644 include/uapi/linux/fmd/Peripherals/fm_pcd_ioctls.h
- create mode 100644 include/uapi/linux/fmd/Peripherals/fm_port_ioctls.h
- create mode 100644 include/uapi/linux/fmd/Peripherals/fm_test_ioctls.h
- create mode 100644 include/uapi/linux/fmd/integrations/Kbuild
- create mode 100644 include/uapi/linux/fmd/integrations/integration_ioctls.h
- create mode 100644 include/uapi/linux/fmd/ioctls.h
- create mode 100644 include/uapi/linux/fmd/net_ioctls.h
-
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Kconfig
-@@ -0,0 +1,153 @@
-+menu "Frame Manager support"
-+
-+menuconfig FSL_SDK_FMAN
-+	bool "Freescale Frame Manager (datapath) support - SDK driver"
-+	depends on (FSL_SOC || ARM64 || ARM) && FSL_SDK_BMAN && FSL_SDK_QMAN && !FSL_FMAN
-+	default y
-+	---help---
-+		If unsure, say Y.
-+
-+if FSL_SDK_FMAN
-+
-+config FSL_SDK_FMAN_TEST
-+	bool "FMan test module"
-+	default n
-+	select FSL_DPAA_HOOKS
-+	---help---
-+		This option compiles test code for FMan.
-+
-+menu "FMAN Processor support"
-+choice
-+	depends on FSL_SDK_FMAN
-+	prompt "Processor Type"
-+
-+config FMAN_ARM
-+	bool "LS1043"
-+	depends on ARM64 || ARM
-+	---help---
-+	  Choose "LS1043" for the ARM platforms:
-+	  LS1043
-+
-+config FMAN_P3040_P4080_P5020
-+	bool "P3040 P4080 5020"
-+
-+config FMAN_P1023
-+	bool "P1023"
-+
-+config FMAN_V3H
-+	bool "FmanV3H"
-+	---help---
-+	  Choose "FmanV3H" for Fman rev3H:
-+	  B4860, T4240, T4160, etc
-+
-+config FMAN_V3L
-+	bool "FmanV3L"
-+	---help---
-+	  Choose "FmanV3L" for Fman rev3L:
-+	  T1040, T1042, T1020, T1022, T1023, T1024, etc
-+
-+endchoice
-+endmenu
-+
-+config FMAN_MIB_CNT_OVF_IRQ_EN
-+	bool "Enable the dTSEC MIB counters overflow interrupt"
-+	default n
-+	---help---
-+		Enable the dTSEC MIB counters overflow interrupt to get
-+		accurate MIB counters values. Enabled it compensates
-+		for the counters overflow but reduces performance and
-+		triggers error messages in HV setups.
-+
-+config FSL_FM_MAX_FRAME_SIZE
-+	int "Maximum L2 frame size"
-+	depends on FSL_SDK_FMAN
-+	range 64 9600
-+	default "1522"
-+	help
-+		Configure this in relation to the maximum possible MTU of your
-+		network configuration. In particular, one would need to
-+		increase this value in order to use jumbo frames.
-+		FSL_FM_MAX_FRAME_SIZE must accommodate the Ethernet FCS (4 bytes)
-+		and one ETH+VLAN header (18 bytes), to a total of 22 bytes in
-+		excess of the desired L3 MTU.
-+
-+		Note that having too large a FSL_FM_MAX_FRAME_SIZE (much larger
-+		than the actual MTU) may lead to buffer exhaustion, especially
-+		in the case of badly fragmented datagrams on the Rx path.
-+		Conversely, having a FSL_FM_MAX_FRAME_SIZE smaller than the actual
-+		MTU will lead to frames being dropped.
-+
-+		This can be overridden by specifying "fsl_fm_max_frm" in
-+		the kernel bootargs:
-+		 * in Hypervisor-based scenarios, by adding a "chosen" node
-+		with the "bootargs" property specifying
-+		"fsl_fm_max_frm=<YourValue>";
-+		 * in non-Hypervisor-based scenarios, via u-boot's env, by
-+		modifying the "bootargs" env variable.
-+
-+config FSL_FM_RX_EXTRA_HEADROOM
-+	int "Add extra headroom at beginning of data buffers"
-+	depends on FSL_SDK_FMAN
-+	range 16 384
-+	default "64"
-+	help
-+		Configure this to tell the Frame Manager to reserve some extra
-+		space at the beginning of a data buffer on the receive path,
-+		before Internal Context fields are copied. This is in addition
-+		to the private data area already reserved for driver internal
-+		use. The provided value must be a multiple of 16.
-+
-+		This setting can be overridden by specifying
-+		"fsl_fm_rx_extra_headroom" in the kernel bootargs:
-+		 * in Hypervisor-based scenarios, by adding a "chosen" node
-+		with the "bootargs" property specifying
-+		"fsl_fm_rx_extra_headroom=<YourValue>";
-+		 * in non-Hypervisor-based scenarios, via u-boot's env, by
-+		modifying the "bootargs" env variable.
-+
-+config FMAN_PFC
-+	bool "FMan PFC support (EXPERIMENTAL)"
-+	depends on ( FMAN_V3H || FMAN_V3L || FMAN_ARM) && FSL_SDK_FMAN
-+	default n
-+	help
-+		This option enables PFC support on FMan v3 ports.
-+		Data Center Bridging defines Classes of Service that are
-+		flow-controlled using PFC pause frames.
-+
-+if FMAN_PFC
-+config FMAN_PFC_COS_COUNT
-+	int "Number of PFC Classes of Service"
-+	depends on FMAN_PFC && FSL_SDK_FMAN
-+	range 1 4
-+	default "3"
-+	help
-+		The number of Classes of Service controlled by PFC.
-+
-+config FMAN_PFC_QUANTA_0
-+	int "The pause quanta for PFC CoS 0"
-+	depends on FMAN_PFC && FSL_SDK_FMAN
-+	range 0 65535
-+	default "65535"
-+
-+config FMAN_PFC_QUANTA_1
-+	int "The pause quanta for PFC CoS 1"
-+	depends on FMAN_PFC && FSL_SDK_FMAN
-+	range 0 65535
-+	default "65535"
-+
-+config FMAN_PFC_QUANTA_2
-+	int "The pause quanta for PFC CoS 2"
-+	depends on FMAN_PFC && FSL_SDK_FMAN
-+	range 0 65535
-+	default "65535"
-+
-+config FMAN_PFC_QUANTA_3
-+	int "The pause quanta for PFC CoS 3"
-+	depends on FMAN_PFC && FSL_SDK_FMAN
-+	range 0 65535
-+	default "65535"
-+endif
-+
-+endif # FSL_SDK_FMAN
-+
-+endmenu
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Makefile
-@@ -0,0 +1,11 @@
-+#
-+# Makefile for the Freescale Ethernet controllers
-+#
-+ccflags-y           += -DVERSION=\"\"
-+#
-+#Include netcomm SW specific definitions
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+#
-+obj-y		+= etc/
-+obj-y		+= Peripherals/FM/
-+obj-y		+= src/
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/HC/Makefile
-@@ -0,0 +1,15 @@
-+#
-+# Makefile for the Freescale Ethernet controllers
-+#
-+ccflags-y           += -DVERSION=\"\"
-+#
-+#Include netcomm SW specific definitions
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+
-+NCSW_FM_INC = $(srctree)/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/inc
-+
-+ccflags-y += -I$(NCSW_FM_INC)
-+
-+obj-y		+= fsl-ncsw-Hc.o
-+
-+fsl-ncsw-Hc-objs	:=   hc.o
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/HC/hc.c
-@@ -0,0 +1,1232 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "sprint_ext.h"
-+#include "string_ext.h"
-+
-+#include "fm_common.h"
-+#include "fm_hc.h"
-+
-+
-+/**************************************************************************//**
-+ @Description       defaults
-+*//***************************************************************************/
-+#define DEFAULT_dataMemId                                       0
-+
-+#define HC_HCOR_OPCODE_PLCR_PRFL                                0x0
-+#define HC_HCOR_OPCODE_KG_SCM                                   0x1
-+#define HC_HCOR_OPCODE_SYNC                                     0x2
-+#define HC_HCOR_OPCODE_CC                                       0x3
-+#define HC_HCOR_OPCODE_CC_AGE_MASK                              0x4
-+#define HC_HCOR_OPCODE_CC_CAPWAP_REASSM_TIMEOUT                 0x5
-+#define HC_HCOR_OPCODE_CC_REASSM_TIMEOUT                        0x10
-+#define HC_HCOR_OPCODE_CC_IP_FRAG_INITIALIZATION                0x11
-+#define HC_HCOR_OPCODE_CC_UPDATE_WITH_AGING                     0x13
-+#define HC_HCOR_ACTION_REG_REASSM_TIMEOUT_ACTIVE_SHIFT          24
-+#define HC_HCOR_EXTRA_REG_REASSM_TIMEOUT_TSBS_SHIFT             24
-+#define HC_HCOR_EXTRA_REG_CC_AGING_ADD                          0x80000000
-+#define HC_HCOR_EXTRA_REG_CC_AGING_REMOVE                       0x40000000
-+#define HC_HCOR_EXTRA_REG_CC_AGING_CHANGE_MASK                  0xC0000000
-+#define HC_HCOR_EXTRA_REG_CC_REMOVE_INDX_SHIFT                  24
-+#define HC_HCOR_EXTRA_REG_CC_REMOVE_INDX_MASK                   0x1F000000
-+#define HC_HCOR_ACTION_REG_REASSM_TIMEOUT_RES_SHIFT             16
-+#define HC_HCOR_ACTION_REG_REASSM_TIMEOUT_RES_MASK              0xF
-+#define HC_HCOR_ACTION_REG_IP_FRAG_SCRATCH_POOL_CMD_SHIFT       24
-+#define HC_HCOR_ACTION_REG_IP_FRAG_SCRATCH_POOL_BPID            16
-+
-+#define HC_HCOR_GBL                         0x20000000
-+
-+#define HC_HCOR_KG_SCHEME_COUNTER           0x00000400
-+
-+#if (DPAA_VERSION == 10)
-+#define HC_HCOR_KG_SCHEME_REGS_MASK         0xFFFFF800
-+#else
-+#define HC_HCOR_KG_SCHEME_REGS_MASK         0xFFFFFE00
-+#endif /* (DPAA_VERSION == 10) */
-+
-+#define SIZE_OF_HC_FRAME_PORT_REGS          (sizeof(t_HcFrame)-sizeof(struct fman_kg_scheme_regs)+sizeof(t_FmPcdKgPortRegs))
-+#define SIZE_OF_HC_FRAME_SCHEME_REGS        sizeof(t_HcFrame)
-+#define SIZE_OF_HC_FRAME_PROFILES_REGS      (sizeof(t_HcFrame)-sizeof(struct fman_kg_scheme_regs)+sizeof(t_FmPcdPlcrProfileRegs))
-+#define SIZE_OF_HC_FRAME_PROFILE_CNT        (sizeof(t_HcFrame)-sizeof(t_FmPcdPlcrProfileRegs)+sizeof(uint32_t))
-+#define SIZE_OF_HC_FRAME_READ_OR_CC_DYNAMIC 16
-+
-+#define HC_CMD_POOL_SIZE                    (INTG_MAX_NUM_OF_CORES)
-+
-+#define BUILD_FD(len)                     \
-+do {                                      \
-+    memset(&fmFd, 0, sizeof(t_DpaaFD));   \
-+    DPAA_FD_SET_ADDR(&fmFd, p_HcFrame);   \
-+    DPAA_FD_SET_OFFSET(&fmFd, 0);         \
-+    DPAA_FD_SET_LENGTH(&fmFd, len);       \
-+} while (0)
-+
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(push,1)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+typedef struct t_FmPcdKgPortRegs {
-+    volatile uint32_t                       spReg;
-+    volatile uint32_t                       cppReg;
-+} t_FmPcdKgPortRegs;
-+
-+typedef struct t_HcFrame {
-+    volatile uint32_t                           opcode;
-+    volatile uint32_t                           actionReg;
-+    volatile uint32_t                           extraReg;
-+    volatile uint32_t                           commandSequence;
-+    union {
-+        struct fman_kg_scheme_regs              schemeRegs;
-+        struct fman_kg_scheme_regs              schemeRegsWithoutCounter;
-+        t_FmPcdPlcrProfileRegs                  profileRegs;
-+        volatile uint32_t                       singleRegForWrite;    /* for writing SP, CPP, profile counter */
-+        t_FmPcdKgPortRegs                       portRegsForRead;
-+        volatile uint32_t                       clsPlanEntries[CLS_PLAN_NUM_PER_GRP];
-+        t_FmPcdCcCapwapReassmTimeoutParams      ccCapwapReassmTimeout;
-+        t_FmPcdCcReassmTimeoutParams            ccReassmTimeout;
-+    } hcSpecificData;
-+} t_HcFrame;
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+
-+typedef struct t_FmHc {
-+    t_Handle                    h_FmPcd;
-+    t_Handle                    h_HcPortDev;
-+    t_FmPcdQmEnqueueCallback    *f_QmEnqueue;     /**< A callback for enqueuing frames to the QM */
-+    t_Handle                    h_QmArg;          /**< A handle to the QM module */
-+    uint8_t                     dataMemId;        /**< Memory partition ID for data buffers */
-+
-+    uint32_t                    seqNum[HC_CMD_POOL_SIZE];   /* FIFO of seqNum to use when
-+                                                               taking buffer */
-+    uint32_t                    nextSeqNumLocation;         /* seqNum location in seqNum[] for next buffer */
-+    volatile bool               enqueued[HC_CMD_POOL_SIZE]; /* HC is active - frame is enqueued
-+                                                               and not confirmed yet */
-+    t_HcFrame                   *p_Frm[HC_CMD_POOL_SIZE];
-+} t_FmHc;
-+
-+
-+static t_Error FillBufPool(t_FmHc *p_FmHc)
-+{
-+    uint32_t i;
-+
-+    ASSERT_COND(p_FmHc);
-+
-+    for (i = 0; i < HC_CMD_POOL_SIZE; i++)
-+    {
-+#ifdef FM_LOCKUP_ALIGNMENT_ERRATA_FMAN_SW004
-+        p_FmHc->p_Frm[i] = (t_HcFrame *)XX_MallocSmart((sizeof(t_HcFrame) + (16 - (sizeof(t_FmHc) % 16))),
-+                                                       p_FmHc->dataMemId,
-+                                                       16);
-+#else
-+        p_FmHc->p_Frm[i] = (t_HcFrame *)XX_MallocSmart(sizeof(t_HcFrame),
-+                                                       p_FmHc->dataMemId,
-+                                                       16);
-+#endif /* FM_LOCKUP_ALIGNMENT_ERRATA_FMAN_SW004 */
-+        if (!p_FmHc->p_Frm[i])
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, ("FM HC frames!"));
-+    }
-+
-+    /* Initialize FIFO of seqNum to use during GetBuf */
-+    for (i = 0; i < HC_CMD_POOL_SIZE; i++)
-+    {
-+        p_FmHc->seqNum[i] = i;
-+    }
-+    p_FmHc->nextSeqNumLocation = 0;
-+
-+    return E_OK;
-+}
-+
-+static __inline__ t_HcFrame * GetBuf(t_FmHc *p_FmHc, uint32_t *p_SeqNum)
-+{
-+    uint32_t    intFlags;
-+
-+    ASSERT_COND(p_FmHc);
-+
-+    intFlags = FmPcdLock(p_FmHc->h_FmPcd);
-+
-+    if (p_FmHc->nextSeqNumLocation == HC_CMD_POOL_SIZE)
-+    {
-+        /* No more buffers */
-+        FmPcdUnlock(p_FmHc->h_FmPcd, intFlags);
-+        return NULL;
-+    }
-+
-+    *p_SeqNum = p_FmHc->seqNum[p_FmHc->nextSeqNumLocation];
-+    p_FmHc->nextSeqNumLocation++;
-+
-+    FmPcdUnlock(p_FmHc->h_FmPcd, intFlags);
-+    return p_FmHc->p_Frm[*p_SeqNum];
-+}
-+
-+static __inline__ void PutBuf(t_FmHc *p_FmHc, t_HcFrame *p_Buf, uint32_t seqNum)
-+{
-+    uint32_t    intFlags;
-+
-+    UNUSED(p_Buf);
-+
-+    intFlags = FmPcdLock(p_FmHc->h_FmPcd);
-+    ASSERT_COND(p_FmHc->nextSeqNumLocation);
-+    p_FmHc->nextSeqNumLocation--;
-+    p_FmHc->seqNum[p_FmHc->nextSeqNumLocation] = seqNum;
-+    FmPcdUnlock(p_FmHc->h_FmPcd, intFlags);
-+}
-+
-+static __inline__ t_Error EnQFrm(t_FmHc *p_FmHc, t_DpaaFD *p_FmFd, uint32_t seqNum)
-+{
-+    t_Error     err = E_OK;
-+    uint32_t    intFlags;
-+    uint32_t    timeout=100;
-+
-+    intFlags = FmPcdLock(p_FmHc->h_FmPcd);
-+    ASSERT_COND(!p_FmHc->enqueued[seqNum]);
-+    p_FmHc->enqueued[seqNum] = TRUE;
-+    FmPcdUnlock(p_FmHc->h_FmPcd, intFlags);
-+    DBG(TRACE, ("Send Hc, SeqNum %d, buff@0x%x, fd offset 0x%x",
-+                seqNum,
-+                DPAA_FD_GET_ADDR(p_FmFd),
-+                DPAA_FD_GET_OFFSET(p_FmFd)));
-+    err = p_FmHc->f_QmEnqueue(p_FmHc->h_QmArg, (void *)p_FmFd);
-+    if (err)
-+        RETURN_ERROR(MINOR, err, ("HC enqueue failed"));
-+
-+    while (p_FmHc->enqueued[seqNum] && --timeout)
-+        XX_UDelay(100);
-+
-+    if (!timeout)
-+        RETURN_ERROR(MINOR, E_TIMEOUT, ("HC Callback, timeout exceeded"));
-+
-+    return err;
-+}
-+
-+
-+t_Handle FmHcConfigAndInit(t_FmHcParams *p_FmHcParams)
-+{
-+    t_FmHc          *p_FmHc;
-+    t_FmPortParams  fmPortParam;
-+    t_Error         err;
-+
-+    p_FmHc = (t_FmHc *)XX_Malloc(sizeof(t_FmHc));
-+    if (!p_FmHc)
-+    {
-+        REPORT_ERROR(MINOR, E_NO_MEMORY, ("HC obj"));
-+        return NULL;
-+    }
-+    memset(p_FmHc,0,sizeof(t_FmHc));
-+
-+    p_FmHc->h_FmPcd             = p_FmHcParams->h_FmPcd;
-+    p_FmHc->f_QmEnqueue         = p_FmHcParams->params.f_QmEnqueue;
-+    p_FmHc->h_QmArg             = p_FmHcParams->params.h_QmArg;
-+    p_FmHc->dataMemId           = DEFAULT_dataMemId;
-+
-+    err = FillBufPool(p_FmHc);
-+    if (err != E_OK)
-+    {
-+        REPORT_ERROR(MAJOR, err, NO_MSG);
-+        FmHcFree(p_FmHc);
-+        return NULL;
-+    }
-+
-+    if (!FmIsMaster(p_FmHcParams->h_Fm))
-+        return (t_Handle)p_FmHc;
-+
-+    memset(&fmPortParam, 0, sizeof(fmPortParam));
-+    fmPortParam.baseAddr    = p_FmHcParams->params.portBaseAddr;
-+    fmPortParam.portType    = e_FM_PORT_TYPE_OH_HOST_COMMAND;
-+    fmPortParam.portId      = p_FmHcParams->params.portId;
-+    fmPortParam.liodnBase   = p_FmHcParams->params.liodnBase;
-+    fmPortParam.h_Fm        = p_FmHcParams->h_Fm;
-+
-+    fmPortParam.specificParams.nonRxParams.errFqid      = p_FmHcParams->params.errFqid;
-+    fmPortParam.specificParams.nonRxParams.dfltFqid     = p_FmHcParams->params.confFqid;
-+    fmPortParam.specificParams.nonRxParams.qmChannel    = p_FmHcParams->params.qmChannel;
-+
-+    p_FmHc->h_HcPortDev = FM_PORT_Config(&fmPortParam);
-+    if (!p_FmHc->h_HcPortDev)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_HANDLE, ("FM HC port!"));
-+        XX_Free(p_FmHc);
-+        return NULL;
-+    }
-+
-+    err = FM_PORT_ConfigMaxFrameLength(p_FmHc->h_HcPortDev,
-+                                       (uint16_t)sizeof(t_HcFrame));
-+
-+    if (err != E_OK)
-+    {
-+        REPORT_ERROR(MAJOR, err, ("FM HC port init!"));
-+        FmHcFree(p_FmHc);
-+        return NULL;
-+    }
-+
-+    /* final init */
-+    err = FM_PORT_Init(p_FmHc->h_HcPortDev);
-+    if (err != E_OK)
-+    {
-+        REPORT_ERROR(MAJOR, err, ("FM HC port init!"));
-+        FmHcFree(p_FmHc);
-+        return NULL;
-+    }
-+
-+    err = FM_PORT_Enable(p_FmHc->h_HcPortDev);
-+    if (err != E_OK)
-+    {
-+        REPORT_ERROR(MAJOR, err, ("FM HC port enable!"));
-+        FmHcFree(p_FmHc);
-+        return NULL;
-+    }
-+
-+    return (t_Handle)p_FmHc;
-+}
-+
-+void FmHcFree(t_Handle h_FmHc)
-+{
-+    t_FmHc  *p_FmHc = (t_FmHc*)h_FmHc;
-+    int     i;
-+
-+    if (!p_FmHc)
-+        return;
-+
-+    for (i=0; i<HC_CMD_POOL_SIZE; i++)
-+        if (p_FmHc->p_Frm[i])
-+            XX_FreeSmart(p_FmHc->p_Frm[i]);
-+        else
-+            break;
-+
-+    if (p_FmHc->h_HcPortDev)
-+        FM_PORT_Free(p_FmHc->h_HcPortDev);
-+
-+    XX_Free(p_FmHc);
-+}
-+
-+/*****************************************************************************/
-+t_Error FmHcSetFramesDataMemory(t_Handle h_FmHc,
-+                                uint8_t  memId)
-+{
-+    t_FmHc  *p_FmHc = (t_FmHc*)h_FmHc;
-+    int     i;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmHc, E_INVALID_HANDLE);
-+
-+    p_FmHc->dataMemId            = memId;
-+
-+    for (i=0; i<HC_CMD_POOL_SIZE; i++)
-+        if (p_FmHc->p_Frm[i])
-+            XX_FreeSmart(p_FmHc->p_Frm[i]);
-+
-+    return FillBufPool(p_FmHc);
-+}
-+
-+void FmHcTxConf(t_Handle h_FmHc, t_DpaaFD *p_Fd)
-+{
-+    t_FmHc      *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_HcFrame   *p_HcFrame;
-+    uint32_t    intFlags;
-+
-+    ASSERT_COND(p_FmHc);
-+
-+    intFlags = FmPcdLock(p_FmHc->h_FmPcd);
-+    p_HcFrame  = (t_HcFrame *)PTR_MOVE(DPAA_FD_GET_ADDR(p_Fd), DPAA_FD_GET_OFFSET(p_Fd));
-+
-+    DBG(TRACE, ("Hc Conf, SeqNum %d, FD@0x%x, fd offset 0x%x",
-+                p_HcFrame->commandSequence, DPAA_FD_GET_ADDR(p_Fd), DPAA_FD_GET_OFFSET(p_Fd)));
-+
-+    if (!(p_FmHc->enqueued[p_HcFrame->commandSequence]))
-+        REPORT_ERROR(MINOR, E_INVALID_FRAME, ("Not an Host-Command frame received!"));
-+    else
-+        p_FmHc->enqueued[p_HcFrame->commandSequence] = FALSE;
-+    FmPcdUnlock(p_FmHc->h_FmPcd, intFlags);
-+}
-+
-+t_Error FmHcPcdKgSetScheme(t_Handle                    h_FmHc,
-+                           t_Handle                    h_Scheme,
-+                           struct fman_kg_scheme_regs  *p_SchemeRegs,
-+                           bool                        updateCounter)
-+{
-+    t_FmHc                              *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_Error                             err = E_OK;
-+    t_HcFrame                           *p_HcFrame;
-+    t_DpaaFD                            fmFd;
-+    uint8_t                             physicalSchemeId;
-+    uint32_t                            seqNum;
-+
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+
-+    physicalSchemeId = FmPcdKgGetSchemeId(h_Scheme);
-+
-+    memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+    p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_KG_SCM);
-+    p_HcFrame->actionReg  = FmPcdKgBuildWriteSchemeActionReg(physicalSchemeId, updateCounter);
-+    p_HcFrame->extraReg = HC_HCOR_KG_SCHEME_REGS_MASK;
-+    memcpy(&p_HcFrame->hcSpecificData.schemeRegs, p_SchemeRegs, sizeof(struct fman_kg_scheme_regs));
-+    if (!updateCounter)
-+    {
-+        p_HcFrame->hcSpecificData.schemeRegs.kgse_dv0   = p_SchemeRegs->kgse_dv0;
-+        p_HcFrame->hcSpecificData.schemeRegs.kgse_dv1   = p_SchemeRegs->kgse_dv1;
-+        p_HcFrame->hcSpecificData.schemeRegs.kgse_ccbs  = p_SchemeRegs->kgse_ccbs;
-+        p_HcFrame->hcSpecificData.schemeRegs.kgse_mv    = p_SchemeRegs->kgse_mv;
-+    }
-+    p_HcFrame->commandSequence = seqNum;
-+
-+    BUILD_FD(sizeof(t_HcFrame));
-+
-+    err = EnQFrm(p_FmHc, &fmFd, seqNum);
-+
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+
-+    if (err != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmHcPcdKgDeleteScheme(t_Handle h_FmHc, t_Handle h_Scheme)
-+{
-+    t_FmHc      *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_Error     err = E_OK;
-+    t_HcFrame   *p_HcFrame;
-+    t_DpaaFD    fmFd;
-+    uint8_t     physicalSchemeId = FmPcdKgGetSchemeId(h_Scheme);
-+    uint32_t    seqNum;
-+
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+
-+    memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+    p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_KG_SCM);
-+    p_HcFrame->actionReg  = FmPcdKgBuildWriteSchemeActionReg(physicalSchemeId, TRUE);
-+    p_HcFrame->extraReg = HC_HCOR_KG_SCHEME_REGS_MASK;
-+    memset(&p_HcFrame->hcSpecificData.schemeRegs, 0, sizeof(struct fman_kg_scheme_regs));
-+    p_HcFrame->commandSequence = seqNum;
-+
-+    BUILD_FD(sizeof(t_HcFrame));
-+
-+    err = EnQFrm(p_FmHc, &fmFd, seqNum);
-+
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+
-+    if (err != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmHcPcdKgCcGetSetParams(t_Handle h_FmHc, t_Handle  h_Scheme, uint32_t requiredAction, uint32_t value)
-+{
-+    t_FmHc      *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_Error     err = E_OK;
-+    t_HcFrame   *p_HcFrame;
-+    t_DpaaFD    fmFd;
-+    uint8_t     relativeSchemeId;
-+    uint8_t     physicalSchemeId = FmPcdKgGetSchemeId(h_Scheme);
-+    uint32_t    tmpReg32 = 0;
-+    uint32_t    seqNum;
-+
-+    /* Scheme is locked by calling routine */
-+    /* WARNING - this lock will not be efficient if other HC routine will attempt to change
-+     * "kgse_mode" or "kgse_om" without locking scheme !
-+     */
-+
-+    relativeSchemeId = FmPcdKgGetRelativeSchemeId(p_FmHc->h_FmPcd, physicalSchemeId);
-+    if ( relativeSchemeId == FM_PCD_KG_NUM_OF_SCHEMES)
-+        RETURN_ERROR(MAJOR, E_NOT_IN_RANGE, NO_MSG);
-+
-+    if (!FmPcdKgGetRequiredActionFlag(p_FmHc->h_FmPcd, relativeSchemeId) ||
-+       !(FmPcdKgGetRequiredAction(p_FmHc->h_FmPcd, relativeSchemeId) & requiredAction))
-+    {
-+        if ((requiredAction & UPDATE_NIA_ENQ_WITHOUT_DMA) &&
-+            (FmPcdKgGetNextEngine(p_FmHc->h_FmPcd, relativeSchemeId) == e_FM_PCD_PLCR))
-+            {
-+                if ((FmPcdKgIsDirectPlcr(p_FmHc->h_FmPcd, relativeSchemeId) == FALSE) ||
-+                    (FmPcdKgIsDistrOnPlcrProfile(p_FmHc->h_FmPcd, relativeSchemeId) == TRUE))
-+                    RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("In this situation PP can not be with distribution and has to be shared"));
-+                err = FmPcdPlcrCcGetSetParams(p_FmHc->h_FmPcd, FmPcdKgGetRelativeProfileId(p_FmHc->h_FmPcd, relativeSchemeId), requiredAction);
-+                if (err)
-+                    RETURN_ERROR(MAJOR, err, NO_MSG);
-+            }
-+        else /* From here we deal with KG-Schemes only */
-+        {
-+            /* Pre change general code */
-+            p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+            if (!p_HcFrame)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+            memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+            p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_KG_SCM);
-+            p_HcFrame->actionReg  = FmPcdKgBuildReadSchemeActionReg(physicalSchemeId);
-+            p_HcFrame->extraReg = HC_HCOR_KG_SCHEME_REGS_MASK;
-+            p_HcFrame->commandSequence = seqNum;
-+            BUILD_FD(SIZE_OF_HC_FRAME_READ_OR_CC_DYNAMIC);
-+            if ((err = EnQFrm(p_FmHc, &fmFd, seqNum)) != E_OK)
-+            {
-+                PutBuf(p_FmHc, p_HcFrame, seqNum);
-+                RETURN_ERROR(MINOR, err, NO_MSG);
-+            }
-+
-+            /* specific change */
-+            if ((requiredAction & UPDATE_NIA_ENQ_WITHOUT_DMA) &&
-+                ((FmPcdKgGetNextEngine(p_FmHc->h_FmPcd, relativeSchemeId) == e_FM_PCD_DONE) &&
-+                 (FmPcdKgGetDoneAction(p_FmHc->h_FmPcd, relativeSchemeId) ==  e_FM_PCD_ENQ_FRAME)))
-+            {
-+                tmpReg32 = p_HcFrame->hcSpecificData.schemeRegs.kgse_mode;
-+                ASSERT_COND(tmpReg32 & (NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME));
-+                p_HcFrame->hcSpecificData.schemeRegs.kgse_mode =  tmpReg32 | NIA_BMI_AC_ENQ_FRAME_WITHOUT_DMA;
-+            }
-+
-+            if ((requiredAction & UPDATE_KG_NIA_CC_WA) &&
-+                (FmPcdKgGetNextEngine(p_FmHc->h_FmPcd, relativeSchemeId) == e_FM_PCD_CC))
-+            {
-+                tmpReg32 = p_HcFrame->hcSpecificData.schemeRegs.kgse_mode;
-+                ASSERT_COND(tmpReg32 & (NIA_ENG_FM_CTL | NIA_FM_CTL_AC_CC));
-+                tmpReg32 &= ~NIA_FM_CTL_AC_CC;
-+                p_HcFrame->hcSpecificData.schemeRegs.kgse_mode =  tmpReg32 | NIA_FM_CTL_AC_PRE_CC;
-+            }
-+
-+            if (requiredAction & UPDATE_KG_OPT_MODE)
-+                p_HcFrame->hcSpecificData.schemeRegs.kgse_om = value;
-+
-+            if (requiredAction & UPDATE_KG_NIA)
-+            {
-+                tmpReg32 = p_HcFrame->hcSpecificData.schemeRegs.kgse_mode;
-+                tmpReg32 &= ~(NIA_ENG_MASK | NIA_AC_MASK);
-+                tmpReg32 |= value;
-+                p_HcFrame->hcSpecificData.schemeRegs.kgse_mode = tmpReg32;
-+            }
-+
-+            /* Post change general code */
-+            p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_KG_SCM);
-+            p_HcFrame->actionReg  = FmPcdKgBuildWriteSchemeActionReg(physicalSchemeId, FALSE);
-+            p_HcFrame->extraReg = HC_HCOR_KG_SCHEME_REGS_MASK;
-+
-+            BUILD_FD(sizeof(t_HcFrame));
-+            err = EnQFrm(p_FmHc, &fmFd, seqNum);
-+
-+            PutBuf(p_FmHc, p_HcFrame, seqNum);
-+
-+            if (err != E_OK)
-+                RETURN_ERROR(MINOR, err, NO_MSG);
-+        }
-+    }
-+
-+    return E_OK;
-+}
-+
-+uint32_t  FmHcPcdKgGetSchemeCounter(t_Handle h_FmHc, t_Handle h_Scheme)
-+{
-+    t_FmHc      *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_Error     err;
-+    t_HcFrame   *p_HcFrame;
-+    t_DpaaFD    fmFd;
-+    uint32_t    retVal;
-+    uint8_t     relativeSchemeId;
-+    uint8_t     physicalSchemeId = FmPcdKgGetSchemeId(h_Scheme);
-+    uint32_t    seqNum;
-+
-+    relativeSchemeId = FmPcdKgGetRelativeSchemeId(p_FmHc->h_FmPcd, physicalSchemeId);
-+    if ( relativeSchemeId == FM_PCD_KG_NUM_OF_SCHEMES)
-+    {
-+        REPORT_ERROR(MAJOR, E_NOT_IN_RANGE, NO_MSG);
-+        return 0;
-+    }
-+
-+    /* first read scheme and check that it is valid */
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+    {
-+        REPORT_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+        return 0;
-+    }
-+    memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+    p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_KG_SCM);
-+    p_HcFrame->actionReg  = FmPcdKgBuildReadSchemeActionReg(physicalSchemeId);
-+    p_HcFrame->extraReg = HC_HCOR_KG_SCHEME_REGS_MASK;
-+    p_HcFrame->commandSequence = seqNum;
-+
-+    BUILD_FD(SIZE_OF_HC_FRAME_READ_OR_CC_DYNAMIC);
-+
-+    err = EnQFrm(p_FmHc, &fmFd, seqNum);
-+    if (err != E_OK)
-+    {
-+        PutBuf(p_FmHc, p_HcFrame, seqNum);
-+        REPORT_ERROR(MINOR, err, NO_MSG);
-+        return 0;
-+    }
-+
-+    if (!FmPcdKgHwSchemeIsValid(p_HcFrame->hcSpecificData.schemeRegs.kgse_mode))
-+    {
-+        PutBuf(p_FmHc, p_HcFrame, seqNum);
-+        REPORT_ERROR(MAJOR, E_ALREADY_EXISTS, ("Scheme is invalid"));
-+        return 0;
-+    }
-+
-+    retVal = p_HcFrame->hcSpecificData.schemeRegs.kgse_spc;
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+
-+    return retVal;
-+}
-+
-+t_Error  FmHcPcdKgSetSchemeCounter(t_Handle h_FmHc, t_Handle h_Scheme, uint32_t value)
-+{
-+    t_FmHc      *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_Error     err = E_OK;
-+    t_HcFrame   *p_HcFrame;
-+    t_DpaaFD    fmFd;
-+    uint8_t     relativeSchemeId, physicalSchemeId;
-+    uint32_t    seqNum;
-+
-+    physicalSchemeId = FmPcdKgGetSchemeId(h_Scheme);
-+    relativeSchemeId = FmPcdKgGetRelativeSchemeId(p_FmHc->h_FmPcd, physicalSchemeId);
-+    if ( relativeSchemeId == FM_PCD_KG_NUM_OF_SCHEMES)
-+        RETURN_ERROR(MAJOR, E_NOT_IN_RANGE, NO_MSG);
-+
-+    /* first read scheme and check that it is valid */
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+    memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+    p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_KG_SCM);
-+    p_HcFrame->actionReg  = FmPcdKgBuildWriteSchemeActionReg(physicalSchemeId, TRUE);
-+    p_HcFrame->extraReg = HC_HCOR_KG_SCHEME_COUNTER;
-+    /* write counter */
-+    p_HcFrame->hcSpecificData.singleRegForWrite = value;
-+    p_HcFrame->commandSequence = seqNum;
-+
-+    BUILD_FD(sizeof(t_HcFrame));
-+
-+    err = EnQFrm(p_FmHc, &fmFd, seqNum);
-+
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+    return err;
-+}
-+
-+t_Error FmHcPcdKgSetClsPlan(t_Handle h_FmHc, t_FmPcdKgInterModuleClsPlanSet *p_Set)
-+{
-+    t_FmHc                  *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_HcFrame               *p_HcFrame;
-+    t_DpaaFD                fmFd;
-+    uint8_t                 i, idx;
-+    uint32_t                seqNum;
-+    t_Error                 err = E_OK;
-+
-+    ASSERT_COND(p_FmHc);
-+
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+
-+    for (i = p_Set->baseEntry; i < (p_Set->baseEntry+p_Set->numOfClsPlanEntries); i+=8)
-+    {
-+        memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+        p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_KG_SCM);
-+        p_HcFrame->actionReg  = FmPcdKgBuildWriteClsPlanBlockActionReg((uint8_t)(i / CLS_PLAN_NUM_PER_GRP));
-+        p_HcFrame->extraReg = HC_HCOR_KG_SCHEME_REGS_MASK;
-+
-+        idx = (uint8_t)(i - p_Set->baseEntry);
-+        ASSERT_COND(idx < FM_PCD_MAX_NUM_OF_CLS_PLANS);
-+        memcpy(&p_HcFrame->hcSpecificData.clsPlanEntries, &p_Set->vectors[idx], CLS_PLAN_NUM_PER_GRP*sizeof(uint32_t));
-+        p_HcFrame->commandSequence = seqNum;
-+
-+        BUILD_FD(sizeof(t_HcFrame));
-+
-+        if ((err = EnQFrm(p_FmHc, &fmFd, seqNum)) != E_OK)
-+        {
-+            PutBuf(p_FmHc, p_HcFrame, seqNum);
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        }
-+    }
-+
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+    return err;
-+}
-+
-+t_Error FmHcPcdKgDeleteClsPlan(t_Handle h_FmHc, uint8_t  grpId)
-+{
-+    t_FmHc                              *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_FmPcdKgInterModuleClsPlanSet      *p_ClsPlanSet;
-+
-+    p_ClsPlanSet = (t_FmPcdKgInterModuleClsPlanSet *)XX_Malloc(sizeof(t_FmPcdKgInterModuleClsPlanSet));
-+    if (!p_ClsPlanSet)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Classification plan set"));
-+
-+    memset(p_ClsPlanSet, 0, sizeof(t_FmPcdKgInterModuleClsPlanSet));
-+
-+    p_ClsPlanSet->baseEntry = FmPcdKgGetClsPlanGrpBase(p_FmHc->h_FmPcd, grpId);
-+    p_ClsPlanSet->numOfClsPlanEntries = FmPcdKgGetClsPlanGrpSize(p_FmHc->h_FmPcd, grpId);
-+    ASSERT_COND(p_ClsPlanSet->numOfClsPlanEntries <= FM_PCD_MAX_NUM_OF_CLS_PLANS);
-+
-+    if (FmHcPcdKgSetClsPlan(p_FmHc, p_ClsPlanSet) != E_OK)
-+    {
-+        XX_Free(p_ClsPlanSet);
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+    }
-+
-+    XX_Free(p_ClsPlanSet);
-+    FmPcdKgDestroyClsPlanGrp(p_FmHc->h_FmPcd, grpId);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmHcPcdCcCapwapTimeoutReassm(t_Handle h_FmHc, t_FmPcdCcCapwapReassmTimeoutParams *p_CcCapwapReassmTimeoutParams )
-+{
-+    t_FmHc                              *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_HcFrame                           *p_HcFrame;
-+    t_DpaaFD                            fmFd;
-+    t_Error                             err;
-+    uint32_t                            seqNum;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmHc, E_INVALID_HANDLE,0);
-+
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+
-+    memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+    p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_CC_CAPWAP_REASSM_TIMEOUT);
-+    memcpy(&p_HcFrame->hcSpecificData.ccCapwapReassmTimeout, p_CcCapwapReassmTimeoutParams, sizeof(t_FmPcdCcCapwapReassmTimeoutParams));
-+    p_HcFrame->commandSequence = seqNum;
-+    BUILD_FD(sizeof(t_HcFrame));
-+
-+    err = EnQFrm(p_FmHc, &fmFd, seqNum);
-+
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+    return err;
-+}
-+
-+t_Error FmHcPcdCcIpFragScratchPollCmd(t_Handle h_FmHc, bool fill, t_FmPcdCcFragScratchPoolCmdParams *p_FmPcdCcFragScratchPoolCmdParams)
-+{
-+    t_FmHc                              *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_HcFrame                           *p_HcFrame;
-+    t_DpaaFD                            fmFd;
-+    t_Error                             err;
-+    uint32_t                            seqNum;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmHc, E_INVALID_HANDLE,0);
-+
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+
-+    memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+
-+    p_HcFrame->opcode     = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_CC_IP_FRAG_INITIALIZATION);
-+    p_HcFrame->actionReg  = (uint32_t)(((fill == TRUE) ? 0 : 1) << HC_HCOR_ACTION_REG_IP_FRAG_SCRATCH_POOL_CMD_SHIFT);
-+    p_HcFrame->actionReg |= p_FmPcdCcFragScratchPoolCmdParams->bufferPoolId << HC_HCOR_ACTION_REG_IP_FRAG_SCRATCH_POOL_BPID;
-+    if (fill == TRUE)
-+    {
-+        p_HcFrame->extraReg   = p_FmPcdCcFragScratchPoolCmdParams->numOfBuffers;
-+    }
-+    p_HcFrame->commandSequence = seqNum;
-+
-+    BUILD_FD(sizeof(t_HcFrame));
-+    if ((err = EnQFrm(p_FmHc, &fmFd, seqNum)) != E_OK)
-+    {
-+        PutBuf(p_FmHc, p_HcFrame, seqNum);
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+
-+    p_FmPcdCcFragScratchPoolCmdParams->numOfBuffers = p_HcFrame->extraReg;
-+
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+    return E_OK;
-+}
-+
-+t_Error FmHcPcdCcTimeoutReassm(t_Handle h_FmHc, t_FmPcdCcReassmTimeoutParams *p_CcReassmTimeoutParams, uint8_t *p_Result)
-+{
-+    t_FmHc                              *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_HcFrame                           *p_HcFrame;
-+    t_DpaaFD                            fmFd;
-+    t_Error                             err;
-+    uint32_t                            seqNum;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmHc, E_INVALID_HANDLE,0);
-+
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+
-+    memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+    p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_CC_REASSM_TIMEOUT);
-+    p_HcFrame->actionReg = (uint32_t)((p_CcReassmTimeoutParams->activate ? 0 : 1) << HC_HCOR_ACTION_REG_REASSM_TIMEOUT_ACTIVE_SHIFT);
-+    p_HcFrame->extraReg = (p_CcReassmTimeoutParams->tsbs << HC_HCOR_EXTRA_REG_REASSM_TIMEOUT_TSBS_SHIFT) | p_CcReassmTimeoutParams->iprcpt;
-+    p_HcFrame->commandSequence = seqNum;
-+
-+    BUILD_FD(sizeof(t_HcFrame));
-+    if ((err = EnQFrm(p_FmHc, &fmFd, seqNum)) != E_OK)
-+    {
-+        PutBuf(p_FmHc, p_HcFrame, seqNum);
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+
-+    *p_Result = (uint8_t)
-+        ((p_HcFrame->actionReg >> HC_HCOR_ACTION_REG_REASSM_TIMEOUT_RES_SHIFT) & HC_HCOR_ACTION_REG_REASSM_TIMEOUT_RES_MASK);
-+
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+    return E_OK;
-+}
-+
-+t_Error FmHcPcdPlcrCcGetSetParams(t_Handle h_FmHc,uint16_t absoluteProfileId, uint32_t requiredAction)
-+{
-+    t_FmHc              *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_HcFrame           *p_HcFrame;
-+    t_DpaaFD            fmFd;
-+    t_Error             err;
-+    uint32_t            tmpReg32 = 0;
-+    uint32_t            requiredActionTmp, requiredActionFlag;
-+    uint32_t            seqNum;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmHc, E_INVALID_HANDLE,0);
-+
-+    /* Profile is locked by calling routine */
-+    /* WARNING - this lock will not be efficient if other HC routine will attempt to change
-+     * "fmpl_pegnia" "fmpl_peynia" or "fmpl_pernia" without locking Profile !
-+     */
-+
-+    requiredActionTmp = FmPcdPlcrGetRequiredAction(p_FmHc->h_FmPcd, absoluteProfileId);
-+    requiredActionFlag = FmPcdPlcrGetRequiredActionFlag(p_FmHc->h_FmPcd, absoluteProfileId);
-+
-+    if (!requiredActionFlag || !(requiredActionTmp & requiredAction))
-+    {
-+        if (requiredAction & UPDATE_NIA_ENQ_WITHOUT_DMA)
-+        {
-+            p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+            if (!p_HcFrame)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+            /* first read scheme and check that it is valid */
-+            memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+            p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_PLCR_PRFL);
-+            p_HcFrame->actionReg  = FmPcdPlcrBuildReadPlcrActionReg(absoluteProfileId);
-+            p_HcFrame->extraReg = 0x00008000;
-+            p_HcFrame->commandSequence = seqNum;
-+
-+            BUILD_FD(SIZE_OF_HC_FRAME_READ_OR_CC_DYNAMIC);
-+
-+            if ((err = EnQFrm(p_FmHc, &fmFd, seqNum)) != E_OK)
-+            {
-+                PutBuf(p_FmHc, p_HcFrame, seqNum);
-+                RETURN_ERROR(MINOR, err, NO_MSG);
-+            }
-+
-+            tmpReg32 = p_HcFrame->hcSpecificData.profileRegs.fmpl_pegnia;
-+            if (!(tmpReg32 & (NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME)))
-+            {
-+                PutBuf(p_FmHc, p_HcFrame, seqNum);
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                             ("Next engine of this policer profile has to be assigned to FM_PCD_DONE"));
-+            }
-+
-+            tmpReg32 |= NIA_BMI_AC_ENQ_FRAME_WITHOUT_DMA;
-+
-+            p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_PLCR_PRFL);
-+            p_HcFrame->actionReg  = FmPcdPlcrBuildWritePlcrActionReg(absoluteProfileId);
-+            p_HcFrame->actionReg |= FmPcdPlcrBuildNiaProfileReg(TRUE, FALSE, FALSE);
-+            p_HcFrame->extraReg = 0x00008000;
-+            p_HcFrame->hcSpecificData.singleRegForWrite = tmpReg32;
-+
-+            BUILD_FD(SIZE_OF_HC_FRAME_PROFILE_CNT);
-+
-+            if ((err = EnQFrm(p_FmHc, &fmFd, seqNum)) != E_OK)
-+            {
-+                PutBuf(p_FmHc, p_HcFrame, seqNum);
-+                RETURN_ERROR(MINOR, err, NO_MSG);
-+            }
-+
-+            tmpReg32 = p_HcFrame->hcSpecificData.profileRegs.fmpl_peynia;
-+            if (!(tmpReg32 & (NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME)))
-+            {
-+                PutBuf(p_FmHc, p_HcFrame, seqNum);
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Next engine of this policer profile has to be assigned to FM_PCD_DONE"));
-+            }
-+
-+            tmpReg32 |= NIA_BMI_AC_ENQ_FRAME_WITHOUT_DMA;
-+
-+            p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_PLCR_PRFL);
-+            p_HcFrame->actionReg  = FmPcdPlcrBuildWritePlcrActionReg(absoluteProfileId);
-+            p_HcFrame->actionReg |= FmPcdPlcrBuildNiaProfileReg(FALSE, TRUE, FALSE);
-+            p_HcFrame->extraReg = 0x00008000;
-+            p_HcFrame->hcSpecificData.singleRegForWrite = tmpReg32;
-+
-+            BUILD_FD(SIZE_OF_HC_FRAME_PROFILE_CNT);
-+
-+            if ((err = EnQFrm(p_FmHc, &fmFd, seqNum)) != E_OK)
-+            {
-+                PutBuf(p_FmHc, p_HcFrame, seqNum);
-+                RETURN_ERROR(MINOR, err, NO_MSG);
-+            }
-+
-+            tmpReg32 = p_HcFrame->hcSpecificData.profileRegs.fmpl_pernia;
-+            if (!(tmpReg32 & (NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME)))
-+            {
-+                PutBuf(p_FmHc, p_HcFrame, seqNum);
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Next engine of this policer profile has to be assigned to FM_PCD_DONE"));
-+            }
-+
-+            tmpReg32 |= NIA_BMI_AC_ENQ_FRAME_WITHOUT_DMA;
-+
-+            p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_PLCR_PRFL);
-+            p_HcFrame->actionReg  = FmPcdPlcrBuildWritePlcrActionReg(absoluteProfileId);
-+            p_HcFrame->actionReg |= FmPcdPlcrBuildNiaProfileReg(FALSE, FALSE, TRUE);
-+            p_HcFrame->extraReg = 0x00008000;
-+            p_HcFrame->hcSpecificData.singleRegForWrite = tmpReg32;
-+
-+            BUILD_FD(SIZE_OF_HC_FRAME_PROFILE_CNT);
-+
-+            if ((err = EnQFrm(p_FmHc, &fmFd, seqNum)) != E_OK)
-+            {
-+                PutBuf(p_FmHc, p_HcFrame, seqNum);
-+                RETURN_ERROR(MINOR, err, NO_MSG);
-+            }
-+
-+            PutBuf(p_FmHc, p_HcFrame, seqNum);
-+        }
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Error FmHcPcdPlcrSetProfile(t_Handle h_FmHc, t_Handle h_Profile, t_FmPcdPlcrProfileRegs *p_PlcrRegs)
-+{
-+    t_FmHc                              *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_Error                             err = E_OK;
-+    uint16_t                            profileIndx;
-+    t_HcFrame                           *p_HcFrame;
-+    t_DpaaFD                            fmFd;
-+    uint32_t                            seqNum;
-+
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+
-+    profileIndx = FmPcdPlcrProfileGetAbsoluteId(h_Profile);
-+
-+    memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+    p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_PLCR_PRFL);
-+    p_HcFrame->actionReg  = FmPcdPlcrBuildWritePlcrActionRegs(profileIndx);
-+    p_HcFrame->extraReg = 0x00008000;
-+    memcpy(&p_HcFrame->hcSpecificData.profileRegs, p_PlcrRegs, sizeof(t_FmPcdPlcrProfileRegs));
-+    p_HcFrame->commandSequence = seqNum;
-+
-+    BUILD_FD(sizeof(t_HcFrame));
-+
-+    err = EnQFrm(p_FmHc, &fmFd, seqNum);
-+
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+
-+    if (err != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmHcPcdPlcrDeleteProfile(t_Handle h_FmHc, t_Handle h_Profile)
-+{
-+    t_FmHc      *p_FmHc = (t_FmHc*)h_FmHc;
-+    uint16_t    absoluteProfileId = FmPcdPlcrProfileGetAbsoluteId(h_Profile);
-+    t_Error     err = E_OK;
-+    t_HcFrame   *p_HcFrame;
-+    t_DpaaFD    fmFd;
-+    uint32_t    seqNum;
-+
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+    memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+    p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_PLCR_PRFL);
-+    p_HcFrame->actionReg  = FmPcdPlcrBuildWritePlcrActionReg(absoluteProfileId);
-+    p_HcFrame->actionReg  |= 0x00008000;
-+    p_HcFrame->extraReg = 0x00008000;
-+    memset(&p_HcFrame->hcSpecificData.profileRegs, 0, sizeof(t_FmPcdPlcrProfileRegs));
-+    p_HcFrame->commandSequence = seqNum;
-+
-+    BUILD_FD(sizeof(t_HcFrame));
-+
-+    err = EnQFrm(p_FmHc, &fmFd, seqNum);
-+
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+
-+    if (err != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+t_Error  FmHcPcdPlcrSetProfileCounter(t_Handle h_FmHc, t_Handle h_Profile, e_FmPcdPlcrProfileCounters counter, uint32_t value)
-+{
-+
-+    t_FmHc      *p_FmHc = (t_FmHc*)h_FmHc;
-+    uint16_t    absoluteProfileId = FmPcdPlcrProfileGetAbsoluteId(h_Profile);
-+    t_Error     err = E_OK;
-+    t_HcFrame   *p_HcFrame;
-+    t_DpaaFD    fmFd;
-+    uint32_t    seqNum;
-+
-+    /* first read scheme and check that it is valid */
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+    memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+    p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_PLCR_PRFL);
-+    p_HcFrame->actionReg  = FmPcdPlcrBuildWritePlcrActionReg(absoluteProfileId);
-+    p_HcFrame->actionReg |= FmPcdPlcrBuildCounterProfileReg(counter);
-+    p_HcFrame->extraReg = 0x00008000;
-+    p_HcFrame->hcSpecificData.singleRegForWrite = value;
-+    p_HcFrame->commandSequence = seqNum;
-+
-+    BUILD_FD(SIZE_OF_HC_FRAME_PROFILE_CNT);
-+
-+    err = EnQFrm(p_FmHc, &fmFd, seqNum);
-+
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+
-+    if (err != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+uint32_t FmHcPcdPlcrGetProfileCounter(t_Handle h_FmHc, t_Handle h_Profile, e_FmPcdPlcrProfileCounters counter)
-+{
-+    t_FmHc      *p_FmHc = (t_FmHc*)h_FmHc;
-+    uint16_t    absoluteProfileId = FmPcdPlcrProfileGetAbsoluteId(h_Profile);
-+    t_Error     err;
-+    t_HcFrame   *p_HcFrame;
-+    t_DpaaFD    fmFd;
-+    uint32_t    retVal = 0;
-+    uint32_t    seqNum;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmHc, E_INVALID_HANDLE,0);
-+
-+    /* first read scheme and check that it is valid */
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+    {
-+        REPORT_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+        return 0;
-+    }
-+    memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+    p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_PLCR_PRFL);
-+    p_HcFrame->actionReg  = FmPcdPlcrBuildReadPlcrActionReg(absoluteProfileId);
-+    p_HcFrame->extraReg = 0x00008000;
-+    p_HcFrame->commandSequence = seqNum;
-+
-+    BUILD_FD(SIZE_OF_HC_FRAME_READ_OR_CC_DYNAMIC);
-+
-+    err = EnQFrm(p_FmHc, &fmFd, seqNum);
-+    if (err != E_OK)
-+    {
-+        PutBuf(p_FmHc, p_HcFrame, seqNum);
-+        REPORT_ERROR(MINOR, err, NO_MSG);
-+        return 0;
-+    }
-+
-+    switch (counter)
-+    {
-+        case e_FM_PCD_PLCR_PROFILE_GREEN_PACKET_TOTAL_COUNTER:
-+            retVal = p_HcFrame->hcSpecificData.profileRegs.fmpl_pegpc;
-+            break;
-+        case e_FM_PCD_PLCR_PROFILE_YELLOW_PACKET_TOTAL_COUNTER:
-+            retVal = p_HcFrame->hcSpecificData.profileRegs.fmpl_peypc;
-+            break;
-+        case e_FM_PCD_PLCR_PROFILE_RED_PACKET_TOTAL_COUNTER:
-+            retVal = p_HcFrame->hcSpecificData.profileRegs.fmpl_perpc;
-+            break;
-+        case e_FM_PCD_PLCR_PROFILE_RECOLOURED_YELLOW_PACKET_TOTAL_COUNTER:
-+            retVal = p_HcFrame->hcSpecificData.profileRegs.fmpl_perypc;
-+            break;
-+        case e_FM_PCD_PLCR_PROFILE_RECOLOURED_RED_PACKET_TOTAL_COUNTER:
-+            retVal = p_HcFrame->hcSpecificData.profileRegs.fmpl_perrpc;
-+            break;
-+        default:
-+            REPORT_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+    }
-+
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+    return retVal;
-+}
-+
-+t_Error FmHcKgWriteSp(t_Handle h_FmHc, uint8_t hardwarePortId, uint32_t spReg, bool add)
-+{
-+    t_FmHc                  *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_HcFrame               *p_HcFrame;
-+    t_DpaaFD                fmFd;
-+    t_Error                 err = E_OK;
-+    uint32_t                seqNum;
-+
-+    ASSERT_COND(p_FmHc);
-+
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+    memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+    /* first read SP register */
-+    p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_KG_SCM);
-+    p_HcFrame->actionReg  = FmPcdKgBuildReadPortSchemeBindActionReg(hardwarePortId);
-+    p_HcFrame->extraReg = HC_HCOR_KG_SCHEME_REGS_MASK;
-+    p_HcFrame->commandSequence = seqNum;
-+
-+    BUILD_FD(SIZE_OF_HC_FRAME_PORT_REGS);
-+
-+    if ((err = EnQFrm(p_FmHc, &fmFd, seqNum)) != E_OK)
-+    {
-+        PutBuf(p_FmHc, p_HcFrame, seqNum);
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+
-+    /* spReg is the first reg, so we can use it both for read and for write */
-+    if (add)
-+        p_HcFrame->hcSpecificData.portRegsForRead.spReg |= spReg;
-+    else
-+        p_HcFrame->hcSpecificData.portRegsForRead.spReg &= ~spReg;
-+
-+    p_HcFrame->actionReg  = FmPcdKgBuildWritePortSchemeBindActionReg(hardwarePortId);
-+
-+    BUILD_FD(sizeof(t_HcFrame));
-+
-+    err = EnQFrm(p_FmHc, &fmFd, seqNum);
-+
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+
-+    if (err != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmHcKgWriteCpp(t_Handle h_FmHc, uint8_t hardwarePortId, uint32_t cppReg)
-+{
-+    t_FmHc                  *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_HcFrame               *p_HcFrame;
-+    t_DpaaFD                fmFd;
-+    t_Error                 err = E_OK;
-+    uint32_t                seqNum;
-+
-+    ASSERT_COND(p_FmHc);
-+
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+    memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+    /* first read SP register */
-+    p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_KG_SCM);
-+    p_HcFrame->actionReg  = FmPcdKgBuildWritePortClsPlanBindActionReg(hardwarePortId);
-+    p_HcFrame->extraReg = HC_HCOR_KG_SCHEME_REGS_MASK;
-+    p_HcFrame->hcSpecificData.singleRegForWrite = cppReg;
-+    p_HcFrame->commandSequence = seqNum;
-+
-+    BUILD_FD(sizeof(t_HcFrame));
-+
-+    err = EnQFrm(p_FmHc, &fmFd, seqNum);
-+
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+
-+    if (err != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmHcPcdCcDoDynamicChange(t_Handle h_FmHc, uint32_t oldAdAddrOffset, uint32_t newAdAddrOffset)
-+{
-+    t_FmHc                  *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_HcFrame               *p_HcFrame;
-+    t_DpaaFD                fmFd;
-+    t_Error                 err = E_OK;
-+    uint32_t                seqNum;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmHc, E_INVALID_HANDLE);
-+
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+    memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+
-+    p_HcFrame->opcode     = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_CC);
-+    p_HcFrame->actionReg  = newAdAddrOffset;
-+    p_HcFrame->actionReg |= 0xc0000000;
-+    p_HcFrame->extraReg   = oldAdAddrOffset;
-+    p_HcFrame->commandSequence = seqNum;
-+
-+    BUILD_FD(SIZE_OF_HC_FRAME_READ_OR_CC_DYNAMIC);
-+
-+    err = EnQFrm(p_FmHc, &fmFd, seqNum);
-+
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+
-+    if (err != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmHcPcdSync(t_Handle h_FmHc)
-+{
-+    t_FmHc                  *p_FmHc = (t_FmHc*)h_FmHc;
-+    t_HcFrame               *p_HcFrame;
-+    t_DpaaFD                fmFd;
-+    t_Error                 err = E_OK;
-+    uint32_t                seqNum;
-+
-+    ASSERT_COND(p_FmHc);
-+
-+    p_HcFrame = GetBuf(p_FmHc, &seqNum);
-+    if (!p_HcFrame)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("HC Frame object"));
-+    memset(p_HcFrame, 0, sizeof(t_HcFrame));
-+    /* first read SP register */
-+    p_HcFrame->opcode = (uint32_t)(HC_HCOR_GBL | HC_HCOR_OPCODE_SYNC);
-+    p_HcFrame->actionReg = 0;
-+    p_HcFrame->extraReg = 0;
-+    p_HcFrame->commandSequence = seqNum;
-+
-+    BUILD_FD(sizeof(t_HcFrame));
-+
-+    err = EnQFrm(p_FmHc, &fmFd, seqNum);
-+
-+    PutBuf(p_FmHc, p_HcFrame, seqNum);
-+
-+    if (err != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+t_Handle    FmHcGetPort(t_Handle h_FmHc)
-+{
-+    t_FmHc *p_FmHc = (t_FmHc*)h_FmHc;
-+    return p_FmHc->h_HcPortDev;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/Makefile
-@@ -0,0 +1,28 @@
-+#
-+# Makefile for the Freescale Ethernet controllers
-+#
-+ccflags-y           += -DVERSION=\"\"
-+#
-+#Include netcomm SW specific definitions
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+
-+NCSW_FM_INC = $(srctree)/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/inc
-+
-+ccflags-y += -I$(NCSW_FM_INC)
-+
-+obj-y		+= fsl-ncsw-MAC.o
-+
-+fsl-ncsw-MAC-objs	:=  dtsec.o dtsec_mii_acc.o fm_mac.o tgec.o tgec_mii_acc.o \
-+			    fman_dtsec.o fman_dtsec_mii_acc.o fman_memac.o \
-+			    fman_tgec.o fman_crc32.o
-+
-+ifeq ($(CONFIG_FMAN_V3H),y)
-+fsl-ncsw-MAC-objs	+=  memac.o memac_mii_acc.o fman_memac_mii_acc.o
-+endif
-+ifeq ($(CONFIG_FMAN_V3L),y)
-+fsl-ncsw-MAC-objs       +=  memac.o memac_mii_acc.o fman_memac_mii_acc.o
-+endif
-+ifeq ($(CONFIG_FMAN_ARM),y)
-+fsl-ncsw-MAC-objs       +=  memac.o memac_mii_acc.o fman_memac_mii_acc.o
-+endif
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/dtsec.c
-@@ -0,0 +1,1464 @@
-+/*
-+ * Copyright 2008-2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/******************************************************************************
-+ @File          dtsec.c
-+
-+ @Description   FMan dTSEC driver
-+*//***************************************************************************/
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "string_ext.h"
-+#include "xx_ext.h"
-+#include "endian_ext.h"
-+#include "debug_ext.h"
-+#include "crc_mac_addr_ext.h"
-+
-+#include "fm_common.h"
-+#include "dtsec.h"
-+#include "fsl_fman_dtsec.h"
-+#include "fsl_fman_dtsec_mii_acc.h"
-+
-+/*****************************************************************************/
-+/*                      Internal routines                                    */
-+/*****************************************************************************/
-+
-+static t_Error CheckInitParameters(t_Dtsec *p_Dtsec)
-+{
-+    if (ENET_SPEED_FROM_MODE(p_Dtsec->enetMode) >= e_ENET_SPEED_10000)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Ethernet 1G MAC driver only supports 1G or lower speeds"));
-+    if (p_Dtsec->macId >= FM_MAX_NUM_OF_1G_MACS)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("macId can not be greater than the number of 1G MACs"));
-+    if (p_Dtsec->addr == 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Ethernet MAC Must have a valid MAC Address"));
-+    if ((ENET_SPEED_FROM_MODE(p_Dtsec->enetMode) >= e_ENET_SPEED_1000) &&
-+        p_Dtsec->p_DtsecDriverParam->halfdup_on)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Ethernet MAC 1G can't work in half duplex"));
-+    if (p_Dtsec->p_DtsecDriverParam->halfdup_on && (p_Dtsec->p_DtsecDriverParam)->loopback)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("LoopBack is not supported in halfDuplex mode"));
-+#ifdef FM_RX_PREAM_4_ERRATA_DTSEC_A001
-+    if (p_Dtsec->fmMacControllerDriver.fmRevInfo.majorRev <= 6) /* fixed for rev3 */
-+        if (p_Dtsec->p_DtsecDriverParam->rx_preamble)
-+            RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("preambleRxEn"));
-+#endif /* FM_RX_PREAM_4_ERRATA_DTSEC_A001 */
-+    if (((p_Dtsec->p_DtsecDriverParam)->tx_preamble || (p_Dtsec->p_DtsecDriverParam)->rx_preamble) &&( (p_Dtsec->p_DtsecDriverParam)->preamble_len != 0x7))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Preamble length should be 0x7 bytes"));
-+    if ((p_Dtsec->p_DtsecDriverParam)->halfdup_on &&
-+       (p_Dtsec->p_DtsecDriverParam->tx_time_stamp_en || p_Dtsec->p_DtsecDriverParam->rx_time_stamp_en))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dTSEC in half duplex mode has to be with 1588 timeStamping diable"));
-+    if ((p_Dtsec->p_DtsecDriverParam)->rx_flow && (p_Dtsec->p_DtsecDriverParam)->rx_ctrl_acc )
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Receive control frame are not passed to the system memory so it can not be accept "));
-+    if ((p_Dtsec->p_DtsecDriverParam)->rx_prepend  > MAX_PACKET_ALIGNMENT)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("packetAlignmentPadding can't be greater than %d ",MAX_PACKET_ALIGNMENT ));
-+    if (((p_Dtsec->p_DtsecDriverParam)->non_back_to_back_ipg1  > MAX_INTER_PACKET_GAP) ||
-+        ((p_Dtsec->p_DtsecDriverParam)->non_back_to_back_ipg2 > MAX_INTER_PACKET_GAP) ||
-+        ((p_Dtsec->p_DtsecDriverParam)->back_to_back_ipg > MAX_INTER_PACKET_GAP))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Inter packet gap can't be greater than %d ",MAX_INTER_PACKET_GAP ));
-+    if ((p_Dtsec->p_DtsecDriverParam)->halfdup_alt_backoff_val > MAX_INTER_PALTERNATE_BEB)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("alternateBackoffVal can't be greater than %d ",MAX_INTER_PALTERNATE_BEB ));
-+    if ((p_Dtsec->p_DtsecDriverParam)->halfdup_retransmit > MAX_RETRANSMISSION)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("maxRetransmission can't be greater than %d ",MAX_RETRANSMISSION ));
-+    if ((p_Dtsec->p_DtsecDriverParam)->halfdup_coll_window > MAX_COLLISION_WINDOW)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("collisionWindow can't be greater than %d ",MAX_COLLISION_WINDOW ));
-+
-+    /*  If Auto negotiation process is disabled, need to */
-+    /*  Set up the PHY using the MII Management Interface */
-+    if (p_Dtsec->p_DtsecDriverParam->tbipa > MAX_PHYS)
-+        RETURN_ERROR(MAJOR, E_NOT_IN_RANGE, ("PHY address (should be 0-%d)", MAX_PHYS));
-+    if (!p_Dtsec->f_Exception)
-+        RETURN_ERROR(MAJOR, E_INVALID_HANDLE, ("uninitialized f_Exception"));
-+    if (!p_Dtsec->f_Event)
-+        RETURN_ERROR(MAJOR, E_INVALID_HANDLE, ("uninitialized f_Event"));
-+
-+#ifdef FM_LEN_CHECK_ERRATA_FMAN_SW002
-+    if (p_Dtsec->p_DtsecDriverParam->rx_len_check)
-+       RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("LengthCheck!"));
-+#endif /* FM_LEN_CHECK_ERRATA_FMAN_SW002 */
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static uint32_t GetMacAddrHashCode(uint64_t ethAddr)
-+{
-+    uint32_t crc;
-+
-+    /* CRC calculation */
-+    GET_MAC_ADDR_CRC(ethAddr, crc);
-+
-+    crc = GetMirror32(crc);
-+
-+    return crc;
-+}
-+
-+/* ......................................................................... */
-+
-+static void UpdateStatistics(t_Dtsec *p_Dtsec)
-+{
-+    uint32_t car1, car2;
-+
-+    fman_dtsec_get_clear_carry_regs(p_Dtsec->p_MemMap, &car1, &car2);
-+
-+    if (car1)
-+    {
-+        if (car1 & CAR1_TR64)
-+            p_Dtsec->internalStatistics.tr64 += VAL22BIT;
-+        if (car1 & CAR1_TR127)
-+            p_Dtsec->internalStatistics.tr127 += VAL22BIT;
-+        if (car1 & CAR1_TR255)
-+            p_Dtsec->internalStatistics.tr255 += VAL22BIT;
-+        if (car1 & CAR1_TR511)
-+            p_Dtsec->internalStatistics.tr511 += VAL22BIT;
-+        if (car1 & CAR1_TRK1)
-+            p_Dtsec->internalStatistics.tr1k += VAL22BIT;
-+        if (car1 & CAR1_TRMAX)
-+            p_Dtsec->internalStatistics.trmax += VAL22BIT;
-+        if (car1 & CAR1_TRMGV)
-+            p_Dtsec->internalStatistics.trmgv += VAL22BIT;
-+        if (car1 & CAR1_RBYT)
-+            p_Dtsec->internalStatistics.rbyt += (uint64_t)VAL32BIT;
-+        if (car1 & CAR1_RPKT)
-+            p_Dtsec->internalStatistics.rpkt += VAL22BIT;
-+        if (car1 & CAR1_RMCA)
-+            p_Dtsec->internalStatistics.rmca += VAL22BIT;
-+        if (car1 & CAR1_RBCA)
-+            p_Dtsec->internalStatistics.rbca += VAL22BIT;
-+        if (car1 & CAR1_RXPF)
-+            p_Dtsec->internalStatistics.rxpf += VAL16BIT;
-+        if (car1 & CAR1_RALN)
-+            p_Dtsec->internalStatistics.raln += VAL16BIT;
-+        if (car1 & CAR1_RFLR)
-+            p_Dtsec->internalStatistics.rflr += VAL16BIT;
-+        if (car1 & CAR1_RCDE)
-+            p_Dtsec->internalStatistics.rcde += VAL16BIT;
-+        if (car1 & CAR1_RCSE)
-+            p_Dtsec->internalStatistics.rcse += VAL16BIT;
-+        if (car1 & CAR1_RUND)
-+            p_Dtsec->internalStatistics.rund += VAL16BIT;
-+        if (car1 & CAR1_ROVR)
-+            p_Dtsec->internalStatistics.rovr += VAL16BIT;
-+        if (car1 & CAR1_RFRG)
-+            p_Dtsec->internalStatistics.rfrg += VAL16BIT;
-+        if (car1 & CAR1_RJBR)
-+            p_Dtsec->internalStatistics.rjbr += VAL16BIT;
-+        if (car1 & CAR1_RDRP)
-+            p_Dtsec->internalStatistics.rdrp += VAL16BIT;
-+    }
-+    if (car2)
-+    {
-+        if (car2  & CAR2_TFCS)
-+            p_Dtsec->internalStatistics.tfcs += VAL12BIT;
-+        if (car2  & CAR2_TBYT)
-+            p_Dtsec->internalStatistics.tbyt += (uint64_t)VAL32BIT;
-+        if (car2  & CAR2_TPKT)
-+            p_Dtsec->internalStatistics.tpkt += VAL22BIT;
-+        if (car2  & CAR2_TMCA)
-+            p_Dtsec->internalStatistics.tmca += VAL22BIT;
-+        if (car2  & CAR2_TBCA)
-+            p_Dtsec->internalStatistics.tbca += VAL22BIT;
-+        if (car2  & CAR2_TXPF)
-+            p_Dtsec->internalStatistics.txpf += VAL16BIT;
-+        if (car2  & CAR2_TDRP)
-+            p_Dtsec->internalStatistics.tdrp += VAL16BIT;
-+    }
-+}
-+
-+/* .............................................................................. */
-+
-+static uint16_t DtsecGetMaxFrameLength(t_Handle h_Dtsec)
-+{
-+    t_Dtsec     *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_Dtsec, E_INVALID_HANDLE, 0);
-+    SANITY_CHECK_RETURN_VALUE(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE, 0);
-+
-+    return fman_dtsec_get_max_frame_len(p_Dtsec->p_MemMap);
-+}
-+
-+/* .............................................................................. */
-+
-+static void DtsecIsr(t_Handle h_Dtsec)
-+{
-+    t_Dtsec             *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+    uint32_t            event;
-+    struct dtsec_regs   *p_DtsecMemMap = p_Dtsec->p_MemMap;
-+
-+    /* do not handle MDIO events */
-+    event = fman_dtsec_get_event(p_DtsecMemMap, (uint32_t)(~(DTSEC_IMASK_MMRDEN | DTSEC_IMASK_MMWREN)));
-+
-+    event &= fman_dtsec_get_interrupt_mask(p_DtsecMemMap);
-+
-+    fman_dtsec_ack_event(p_DtsecMemMap, event);
-+
-+    if (event & DTSEC_IMASK_BREN)
-+        p_Dtsec->f_Exception(p_Dtsec->h_App, e_FM_MAC_EX_1G_BAB_RX);
-+    if (event & DTSEC_IMASK_RXCEN)
-+        p_Dtsec->f_Exception(p_Dtsec->h_App, e_FM_MAC_EX_1G_RX_CTL);
-+    if (event & DTSEC_IMASK_MSROEN)
-+        UpdateStatistics(p_Dtsec);
-+    if (event & DTSEC_IMASK_GTSCEN)
-+        p_Dtsec->f_Exception(p_Dtsec->h_App, e_FM_MAC_EX_1G_GRATEFUL_TX_STP_COMPLET);
-+    if (event & DTSEC_IMASK_BTEN)
-+        p_Dtsec->f_Exception(p_Dtsec->h_App, e_FM_MAC_EX_1G_BAB_TX);
-+    if (event & DTSEC_IMASK_TXCEN)
-+        p_Dtsec->f_Exception(p_Dtsec->h_App, e_FM_MAC_EX_1G_TX_CTL);
-+    if (event & DTSEC_IMASK_TXEEN)
-+        p_Dtsec->f_Exception(p_Dtsec->h_App, e_FM_MAC_EX_1G_TX_ERR);
-+    if (event & DTSEC_IMASK_LCEN)
-+        p_Dtsec->f_Exception(p_Dtsec->h_App, e_FM_MAC_EX_1G_LATE_COL);
-+    if (event & DTSEC_IMASK_CRLEN)
-+        p_Dtsec->f_Exception(p_Dtsec->h_App, e_FM_MAC_EX_1G_COL_RET_LMT);
-+    if (event & DTSEC_IMASK_XFUNEN)
-+    {
-+#ifdef FM_TX_LOCKUP_ERRATA_DTSEC6
-+        if (p_Dtsec->fmMacControllerDriver.fmRevInfo.majorRev == 2)
-+        {
-+            uint32_t  tpkt1, tmpReg1, tpkt2, tmpReg2, i;
-+            /* a. Write 0x00E0_0C00 to DTSEC_ID */
-+            /* This is a read only regidter */
-+
-+            /* b. Read and save the value of TPKT */
-+            tpkt1 = GET_UINT32(p_DtsecMemMap->tpkt);
-+
-+            /* c. Read the register at dTSEC address offset 0x32C */
-+            tmpReg1 =  GET_UINT32(*(uint32_t*)((uint8_t*)p_DtsecMemMap + 0x32c));
-+
-+            /* d. Compare bits [9:15] to bits [25:31] of the register at address offset 0x32C. */
-+            if ((tmpReg1 & 0x007F0000) != (tmpReg1 & 0x0000007F))
-+            {
-+                /* If they are not equal, save the value of this register and wait for at least
-+                 * MAXFRM*16 ns */
-+                XX_UDelay((uint32_t)(MIN(DtsecGetMaxFrameLength(p_Dtsec)*16/1000, 1)));
-+            }
-+
-+            /* e. Read and save TPKT again and read the register at dTSEC address offset
-+                0x32C again*/
-+            tpkt2 = GET_UINT32(p_DtsecMemMap->tpkt);
-+            tmpReg2 = GET_UINT32(*(uint32_t*)((uint8_t*)p_DtsecMemMap + 0x32c));
-+
-+            /* f. Compare the value of TPKT saved in step b to value read in step e. Also
-+                compare bits [9:15] of the register at offset 0x32C saved in step d to the value
-+                of bits [9:15] saved in step e. If the two registers values are unchanged, then
-+                the transmit portion of the dTSEC controller is locked up and the user should
-+                proceed to the recover sequence. */
-+            if ((tpkt1 == tpkt2) && ((tmpReg1 & 0x007F0000) == (tmpReg2 & 0x007F0000)))
-+            {
-+                /* recover sequence */
-+
-+                /* a.Write a 1 to RCTRL[GRS]*/
-+
-+                WRITE_UINT32(p_DtsecMemMap->rctrl, GET_UINT32(p_DtsecMemMap->rctrl) | RCTRL_GRS);
-+
-+                /* b.Wait until IEVENT[GRSC]=1, or at least 100 us has elapsed. */
-+                for (i = 0 ; i < 100 ; i++ )
-+                {
-+                    if (GET_UINT32(p_DtsecMemMap->ievent) & DTSEC_IMASK_GRSCEN)
-+                        break;
-+                    XX_UDelay(1);
-+                }
-+                if (GET_UINT32(p_DtsecMemMap->ievent) & DTSEC_IMASK_GRSCEN)
-+                    WRITE_UINT32(p_DtsecMemMap->ievent, DTSEC_IMASK_GRSCEN);
-+                else
-+                    DBG(INFO,("Rx lockup due to dTSEC Tx lockup"));
-+
-+                /* c.Write a 1 to bit n of FM_RSTC (offset 0x0CC of FPM)*/
-+                FmResetMac(p_Dtsec->fmMacControllerDriver.h_Fm, e_FM_MAC_1G, p_Dtsec->fmMacControllerDriver.macId);
-+
-+                /* d.Wait 4 Tx clocks (32 ns) */
-+                XX_UDelay(1);
-+
-+                /* e.Write a 0 to bit n of FM_RSTC. */
-+                /* cleared by FMAN */
-+            }
-+        }
-+#endif /* FM_TX_LOCKUP_ERRATA_DTSEC6 */
-+
-+        p_Dtsec->f_Exception(p_Dtsec->h_App, e_FM_MAC_EX_1G_TX_FIFO_UNDRN);
-+    }
-+    if (event & DTSEC_IMASK_MAGEN)
-+        p_Dtsec->f_Exception(p_Dtsec->h_App, e_FM_MAC_EX_1G_MAG_PCKT);
-+    if (event & DTSEC_IMASK_GRSCEN)
-+        p_Dtsec->f_Exception(p_Dtsec->h_App, e_FM_MAC_EX_1G_GRATEFUL_RX_STP_COMPLET);
-+    if (event & DTSEC_IMASK_TDPEEN)
-+        p_Dtsec->f_Exception(p_Dtsec->h_App, e_FM_MAC_EX_1G_TX_DATA_ERR);
-+    if (event & DTSEC_IMASK_RDPEEN)
-+        p_Dtsec->f_Exception(p_Dtsec->h_App, e_FM_MAC_EX_1G_RX_DATA_ERR);
-+
-+    /*  - masked interrupts */
-+    ASSERT_COND(!(event & DTSEC_IMASK_ABRTEN));
-+    ASSERT_COND(!(event & DTSEC_IMASK_IFERREN));
-+}
-+
-+static void DtsecMdioIsr(t_Handle h_Dtsec)
-+{
-+    t_Dtsec             *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+    uint32_t            event;
-+    struct dtsec_regs   *p_DtsecMemMap = p_Dtsec->p_MemMap;
-+
-+    event = GET_UINT32(p_DtsecMemMap->ievent);
-+    /* handle only MDIO events */
-+    event &= (DTSEC_IMASK_MMRDEN | DTSEC_IMASK_MMWREN);
-+    if (event)
-+    {
-+        event &= GET_UINT32(p_DtsecMemMap->imask);
-+
-+        WRITE_UINT32(p_DtsecMemMap->ievent, event);
-+
-+        if (event & DTSEC_IMASK_MMRDEN)
-+            p_Dtsec->f_Event(p_Dtsec->h_App, e_FM_MAC_EX_1G_MII_MNG_RD_COMPLET);
-+        if (event & DTSEC_IMASK_MMWREN)
-+            p_Dtsec->f_Event(p_Dtsec->h_App, e_FM_MAC_EX_1G_MII_MNG_WR_COMPLET);
-+    }
-+}
-+
-+static void Dtsec1588Isr(t_Handle h_Dtsec)
-+{
-+    t_Dtsec             *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+    uint32_t            event;
-+    struct dtsec_regs   *p_DtsecMemMap = p_Dtsec->p_MemMap;
-+
-+    if (p_Dtsec->ptpTsuEnabled)
-+    {
-+        event = fman_dtsec_check_and_clear_tmr_event(p_DtsecMemMap);
-+
-+        if (event)
-+        {
-+            ASSERT_COND(event & TMR_PEVENT_TSRE);
-+            p_Dtsec->f_Exception(p_Dtsec->h_App, e_FM_MAC_EX_1G_1588_TS_RX_ERR);
-+        }
-+    }
-+}
-+
-+/* ........................................................................... */
-+
-+static void FreeInitResources(t_Dtsec *p_Dtsec)
-+{
-+    if (p_Dtsec->mdioIrq != NO_IRQ)
-+    {
-+        XX_DisableIntr(p_Dtsec->mdioIrq);
-+        XX_FreeIntr(p_Dtsec->mdioIrq);
-+    }
-+    FmUnregisterIntr(p_Dtsec->fmMacControllerDriver.h_Fm, e_FM_MOD_1G_MAC, p_Dtsec->macId, e_FM_INTR_TYPE_ERR);
-+    FmUnregisterIntr(p_Dtsec->fmMacControllerDriver.h_Fm, e_FM_MOD_1G_MAC, p_Dtsec->macId, e_FM_INTR_TYPE_NORMAL);
-+
-+    /* release the driver's group hash table */
-+    FreeHashTable(p_Dtsec->p_MulticastAddrHash);
-+    p_Dtsec->p_MulticastAddrHash =   NULL;
-+
-+    /* release the driver's individual hash table */
-+    FreeHashTable(p_Dtsec->p_UnicastAddrHash);
-+    p_Dtsec->p_UnicastAddrHash =     NULL;
-+}
-+
-+/* ........................................................................... */
-+
-+static t_Error GracefulStop(t_Dtsec *p_Dtsec, e_CommMode mode)
-+{
-+    struct dtsec_regs *p_MemMap;
-+
-+    ASSERT_COND(p_Dtsec);
-+
-+    p_MemMap = p_Dtsec->p_MemMap;
-+    ASSERT_COND(p_MemMap);
-+
-+    /* Assert the graceful transmit stop bit */
-+    if (mode & e_COMM_MODE_RX)
-+    {
-+        fman_dtsec_stop_rx(p_MemMap);
-+
-+#ifdef FM_GRS_ERRATA_DTSEC_A002
-+        if (p_Dtsec->fmMacControllerDriver.fmRevInfo.majorRev == 2)
-+            XX_UDelay(100);
-+#else  /* FM_GRS_ERRATA_DTSEC_A002 */
-+#ifdef FM_GTS_AFTER_DROPPED_FRAME_ERRATA_DTSEC_A004839
-+        XX_UDelay(10);
-+#endif /* FM_GTS_AFTER_DROPPED_FRAME_ERRATA_DTSEC_A004839 */
-+#endif /* FM_GRS_ERRATA_DTSEC_A002 */
-+    }
-+
-+    if (mode & e_COMM_MODE_TX)
-+#if defined(FM_GTS_ERRATA_DTSEC_A004) || defined(FM_GTS_AFTER_MAC_ABORTED_FRAME_ERRATA_DTSEC_A0012)
-+    if (p_Dtsec->fmMacControllerDriver.fmRevInfo.majorRev == 2)
-+        DBG(INFO, ("GTS not supported due to DTSEC_A004 errata."));
-+#else  /* not defined(FM_GTS_ERRATA_DTSEC_A004) ||... */
-+#ifdef FM_GTS_UNDERRUN_ERRATA_DTSEC_A0014
-+        DBG(INFO, ("GTS not supported due to DTSEC_A0014 errata."));
-+#else  /* FM_GTS_UNDERRUN_ERRATA_DTSEC_A0014 */
-+        fman_dtsec_stop_tx(p_MemMap);
-+#endif /* FM_GTS_UNDERRUN_ERRATA_DTSEC_A0014 */
-+#endif /* defined(FM_GTS_ERRATA_DTSEC_A004) ||...  */
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error GracefulRestart(t_Dtsec *p_Dtsec, e_CommMode mode)
-+{
-+    struct dtsec_regs *p_MemMap;
-+
-+    ASSERT_COND(p_Dtsec);
-+    p_MemMap = p_Dtsec->p_MemMap;
-+    ASSERT_COND(p_MemMap);
-+
-+    /* clear the graceful receive stop bit */
-+    if (mode & e_COMM_MODE_TX)
-+        fman_dtsec_start_tx(p_MemMap);
-+
-+    if (mode & e_COMM_MODE_RX)
-+        fman_dtsec_start_rx(p_MemMap);
-+
-+    return E_OK;
-+}
-+
-+
-+/*****************************************************************************/
-+/*                      dTSEC Configs modification functions                 */
-+/*****************************************************************************/
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecConfigLoopback(t_Handle h_Dtsec, bool newVal)
-+{
-+
-+    t_Dtsec *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    p_Dtsec->p_DtsecDriverParam->loopback = newVal;
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecConfigMaxFrameLength(t_Handle h_Dtsec, uint16_t newVal)
-+{
-+    t_Dtsec *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    p_Dtsec->p_DtsecDriverParam->maximum_frame = newVal;
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecConfigPadAndCrc(t_Handle h_Dtsec, bool newVal)
-+{
-+    t_Dtsec *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    p_Dtsec->p_DtsecDriverParam->tx_pad_crc = newVal;
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecConfigHalfDuplex(t_Handle h_Dtsec, bool newVal)
-+{
-+    t_Dtsec *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    p_Dtsec->p_DtsecDriverParam->halfdup_on = newVal;
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecConfigTbiPhyAddr(t_Handle h_Dtsec, uint8_t newVal)
-+{
-+    t_Dtsec *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    p_Dtsec->p_DtsecDriverParam->tbi_phy_addr = newVal;
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecConfigLengthCheck(t_Handle h_Dtsec, bool newVal)
-+{
-+    t_Dtsec *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    p_Dtsec->p_DtsecDriverParam->rx_len_check = newVal;
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecConfigException(t_Handle h_Dtsec, e_FmMacExceptions exception, bool enable)
-+{
-+    t_Dtsec *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+    uint32_t    bitMask = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    if (exception != e_FM_MAC_EX_1G_1588_TS_RX_ERR)
-+    {
-+        GET_EXCEPTION_FLAG(bitMask, exception);
-+        if (bitMask)
-+        {
-+            if (enable)
-+                p_Dtsec->exceptions |= bitMask;
-+            else
-+                p_Dtsec->exceptions &= ~bitMask;
-+        }
-+        else
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Undefined exception"));
-+    }
-+    else
-+    {
-+        if (!p_Dtsec->ptpTsuEnabled)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Exception valid for 1588 only"));
-+
-+        if (enable)
-+            p_Dtsec->enTsuErrExeption = TRUE;
-+        else
-+            p_Dtsec->enTsuErrExeption = FALSE;
-+    }
-+
-+    return E_OK;
-+}
-+
-+
-+/*****************************************************************************/
-+/*                      dTSEC Run Time API functions                         */
-+/*****************************************************************************/
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecEnable(t_Handle h_Dtsec,  e_CommMode mode)
-+{
-+    t_Dtsec     *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    fman_dtsec_enable(p_Dtsec->p_MemMap,
-+                 (bool)!!(mode & e_COMM_MODE_RX),
-+                 (bool)!!(mode & e_COMM_MODE_TX));
-+
-+    GracefulRestart(p_Dtsec, mode);
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecDisable (t_Handle h_Dtsec, e_CommMode mode)
-+{
-+    t_Dtsec     *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    GracefulStop(p_Dtsec, mode);
-+
-+    fman_dtsec_disable(p_Dtsec->p_MemMap,
-+                  (bool)!!(mode & e_COMM_MODE_RX),
-+                  (bool)!!(mode & e_COMM_MODE_TX));
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecSetTxPauseFrames(t_Handle h_Dtsec,
-+                                     uint8_t  priority,
-+                                     uint16_t pauseTime,
-+                                     uint16_t threshTime)
-+{
-+    t_Dtsec     *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    UNUSED(priority);UNUSED(threshTime);
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+#ifdef FM_BAD_TX_TS_IN_B_2_B_ERRATA_DTSEC_A003
-+    if (p_Dtsec->fmMacControllerDriver.fmRevInfo.majorRev == 2)
-+        if (0 < pauseTime && pauseTime <= 320)
-+            RETURN_ERROR(MINOR, E_INVALID_VALUE,
-+                     ("This pause-time value of %d is illegal due to errata dTSEC-A003!"
-+                      " value should be greater than 320."));
-+#endif /* FM_BAD_TX_TS_IN_B_2_B_ERRATA_DTSEC_A003 */
-+
-+    fman_dtsec_set_tx_pause_frames(p_Dtsec->p_MemMap, pauseTime);
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+/* backward compatibility. will be removed in the future. */
-+static t_Error DtsecTxMacPause(t_Handle h_Dtsec, uint16_t pauseTime)
-+{
-+    return DtsecSetTxPauseFrames(h_Dtsec, 0, pauseTime, 0);
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecRxIgnoreMacPause(t_Handle h_Dtsec, bool en)
-+{
-+    t_Dtsec         *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+    bool            accept_pause = !en;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    fman_dtsec_handle_rx_pause(p_Dtsec->p_MemMap, accept_pause);
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecEnable1588TimeStamp(t_Handle h_Dtsec)
-+{
-+    t_Dtsec     *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    p_Dtsec->ptpTsuEnabled = TRUE;
-+    fman_dtsec_set_ts(p_Dtsec->p_MemMap, TRUE);
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecDisable1588TimeStamp(t_Handle h_Dtsec)
-+{
-+    t_Dtsec     *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    p_Dtsec->ptpTsuEnabled = FALSE;
-+    fman_dtsec_set_ts(p_Dtsec->p_MemMap, FALSE);
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecGetStatistics(t_Handle h_Dtsec, t_FmMacStatistics *p_Statistics)
-+{
-+    t_Dtsec             *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+    struct dtsec_regs   *p_DtsecMemMap;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_Statistics, E_NULL_POINTER);
-+
-+    p_DtsecMemMap = p_Dtsec->p_MemMap;
-+
-+    if (p_Dtsec->statisticsLevel == e_FM_MAC_NONE_STATISTICS)
-+        RETURN_ERROR(MINOR, E_INVALID_STATE, ("Statistics disabled"));
-+
-+    memset(p_Statistics, 0xff, sizeof(t_FmMacStatistics));
-+
-+    if (p_Dtsec->statisticsLevel == e_FM_MAC_FULL_STATISTICS)
-+    {
-+        p_Statistics->eStatPkts64 = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_TR64)
-+                + p_Dtsec->internalStatistics.tr64;
-+        p_Statistics->eStatPkts65to127 = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_TR127)
-+                + p_Dtsec->internalStatistics.tr127;
-+        p_Statistics->eStatPkts128to255 = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_TR255)
-+                + p_Dtsec->internalStatistics.tr255;
-+        p_Statistics->eStatPkts256to511 = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_TR511)
-+                + p_Dtsec->internalStatistics.tr511;
-+        p_Statistics->eStatPkts512to1023 = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_TR1K)
-+                + p_Dtsec->internalStatistics.tr1k;
-+        p_Statistics->eStatPkts1024to1518 = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_TRMAX)
-+                + p_Dtsec->internalStatistics.trmax;
-+        p_Statistics->eStatPkts1519to1522 = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_TRMGV)
-+                + p_Dtsec->internalStatistics.trmgv;
-+
-+        /* MIB II */
-+        p_Statistics->ifInOctets = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_RBYT)
-+                + p_Dtsec->internalStatistics.rbyt;
-+        p_Statistics->ifInPkts = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_RPKT)
-+                + p_Dtsec->internalStatistics.rpkt;
-+        p_Statistics->ifInUcastPkts = 0;
-+        p_Statistics->ifInMcastPkts = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_RMCA)
-+                + p_Dtsec->internalStatistics.rmca;
-+        p_Statistics->ifInBcastPkts = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_RBCA)
-+                + p_Dtsec->internalStatistics.rbca;
-+        p_Statistics->ifOutOctets = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_TBYT)
-+                + p_Dtsec->internalStatistics.tbyt;
-+        p_Statistics->ifOutPkts = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_TPKT)
-+                + p_Dtsec->internalStatistics.tpkt;
-+        p_Statistics->ifOutUcastPkts = 0;
-+        p_Statistics->ifOutMcastPkts = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_TMCA)
-+                + p_Dtsec->internalStatistics.tmca;
-+        p_Statistics->ifOutBcastPkts = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_TBCA)
-+                + p_Dtsec->internalStatistics.tbca;
-+    }
-+
-+    p_Statistics->eStatFragments = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_RFRG)
-+            + p_Dtsec->internalStatistics.rfrg;
-+    p_Statistics->eStatJabbers = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_RJBR)
-+            + p_Dtsec->internalStatistics.rjbr;
-+    p_Statistics->eStatsDropEvents = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_RDRP)
-+            + p_Dtsec->internalStatistics.rdrp;
-+    p_Statistics->eStatCRCAlignErrors = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_RALN)
-+            + p_Dtsec->internalStatistics.raln;
-+    p_Statistics->eStatUndersizePkts = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_RUND)
-+            + p_Dtsec->internalStatistics.rund;
-+    p_Statistics->eStatOversizePkts = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_ROVR)
-+            + p_Dtsec->internalStatistics.rovr;
-+    p_Statistics->reStatPause = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_RXPF)
-+            + p_Dtsec->internalStatistics.rxpf;
-+    p_Statistics->teStatPause = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_TXPF)
-+            + p_Dtsec->internalStatistics.txpf;
-+    p_Statistics->ifInDiscards = p_Statistics->eStatsDropEvents;
-+    p_Statistics->ifInErrors = p_Statistics->eStatsDropEvents + p_Statistics->eStatCRCAlignErrors
-+            + fman_dtsec_get_stat_counter(p_DtsecMemMap,E_DTSEC_STAT_RFLR) + p_Dtsec->internalStatistics.rflr
-+            + fman_dtsec_get_stat_counter(p_DtsecMemMap,E_DTSEC_STAT_RCDE) + p_Dtsec->internalStatistics.rcde
-+            + fman_dtsec_get_stat_counter(p_DtsecMemMap,E_DTSEC_STAT_RCSE) + p_Dtsec->internalStatistics.rcse;
-+
-+    p_Statistics->ifOutDiscards = fman_dtsec_get_stat_counter(p_DtsecMemMap, E_DTSEC_STAT_TDRP)
-+            + p_Dtsec->internalStatistics.tdrp;
-+    p_Statistics->ifOutErrors = p_Statistics->ifOutDiscards                                           /**< Number of frames transmitted with error: */
-+            + fman_dtsec_get_stat_counter(p_DtsecMemMap,E_DTSEC_STAT_TFCS)
-+            + p_Dtsec->internalStatistics.tfcs;
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecModifyMacAddress (t_Handle h_Dtsec, t_EnetAddr *p_EnetAddr)
-+{
-+    t_Dtsec     *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    /* Initialize MAC Station Address registers (1 & 2)    */
-+    /* Station address have to be swapped (big endian to little endian */
-+    p_Dtsec->addr = ENET_ADDR_TO_UINT64(*p_EnetAddr);
-+    fman_dtsec_set_mac_address(p_Dtsec->p_MemMap, (uint8_t *)(*p_EnetAddr));
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecResetCounters (t_Handle h_Dtsec)
-+{
-+    t_Dtsec     *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    /* clear HW counters */
-+    fman_dtsec_reset_stat(p_Dtsec->p_MemMap);
-+
-+    /* clear SW counters holding carries */
-+    memset(&p_Dtsec->internalStatistics, 0, sizeof(t_InternalStatistics));
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecAddExactMatchMacAddress(t_Handle h_Dtsec, t_EnetAddr *p_EthAddr)
-+{
-+    t_Dtsec   *p_Dtsec = (t_Dtsec *) h_Dtsec;
-+    uint64_t  ethAddr;
-+    uint8_t   paddrNum;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    ethAddr = ENET_ADDR_TO_UINT64(*p_EthAddr);
-+
-+    if (ethAddr & GROUP_ADDRESS)
-+        /* Multicast address has no effect in PADDR */
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Multicast address"));
-+
-+    /* Make sure no PADDR contains this address */
-+    for (paddrNum = 0; paddrNum < DTSEC_NUM_OF_PADDRS; paddrNum++)
-+        if (p_Dtsec->indAddrRegUsed[paddrNum])
-+            if (p_Dtsec->paddr[paddrNum] == ethAddr)
-+                RETURN_ERROR(MAJOR, E_ALREADY_EXISTS, NO_MSG);
-+
-+    /* Find first unused PADDR */
-+    for (paddrNum = 0; paddrNum < DTSEC_NUM_OF_PADDRS; paddrNum++)
-+        if (!(p_Dtsec->indAddrRegUsed[paddrNum]))
-+        {
-+            /* mark this PADDR as used */
-+            p_Dtsec->indAddrRegUsed[paddrNum] = TRUE;
-+            /* store address */
-+            p_Dtsec->paddr[paddrNum] = ethAddr;
-+
-+            /* put in hardware */
-+            fman_dtsec_add_addr_in_paddr(p_Dtsec->p_MemMap, (uint64_t)PTR_TO_UINT(&ethAddr), paddrNum);
-+            p_Dtsec->numOfIndAddrInRegs++;
-+
-+            return E_OK;
-+        }
-+
-+    /* No free PADDR */
-+    RETURN_ERROR(MAJOR, E_FULL, NO_MSG);
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecDelExactMatchMacAddress(t_Handle h_Dtsec, t_EnetAddr *p_EthAddr)
-+{
-+    t_Dtsec   *p_Dtsec = (t_Dtsec *) h_Dtsec;
-+    uint64_t  ethAddr;
-+    uint8_t   paddrNum;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    ethAddr = ENET_ADDR_TO_UINT64(*p_EthAddr);
-+
-+    /* Find used PADDR containing this address */
-+    for (paddrNum = 0; paddrNum < DTSEC_NUM_OF_PADDRS; paddrNum++)
-+    {
-+        if ((p_Dtsec->indAddrRegUsed[paddrNum]) &&
-+            (p_Dtsec->paddr[paddrNum] == ethAddr))
-+        {
-+            /* mark this PADDR as not used */
-+            p_Dtsec->indAddrRegUsed[paddrNum] = FALSE;
-+            /* clear in hardware */
-+            fman_dtsec_clear_addr_in_paddr(p_Dtsec->p_MemMap, paddrNum);
-+            p_Dtsec->numOfIndAddrInRegs--;
-+
-+            return E_OK;
-+        }
-+    }
-+
-+    RETURN_ERROR(MAJOR, E_NOT_FOUND, NO_MSG);
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecAddHashMacAddress(t_Handle h_Dtsec, t_EnetAddr *p_EthAddr)
-+{
-+    t_Dtsec         *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+    t_EthHashEntry  *p_HashEntry;
-+    uint64_t        ethAddr;
-+    int32_t         bucket;
-+    uint32_t        crc;
-+    bool            mcast, ghtx;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    ethAddr = ENET_ADDR_TO_UINT64(*p_EthAddr);
-+
-+    ghtx = (bool)((fman_dtsec_get_rctrl(p_Dtsec->p_MemMap) & RCTRL_GHTX) ? TRUE : FALSE);
-+    mcast = (bool)((ethAddr & MAC_GROUP_ADDRESS) ? TRUE : FALSE);
-+
-+    if (ghtx && !mcast) /* Cannot handle unicast mac addr when GHTX is on */
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Could not compute hash bucket"));
-+
-+    crc = GetMacAddrHashCode(ethAddr);
-+
-+    /* considering the 9 highest order bits in crc H[8:0]:
-+     * if ghtx = 0 H[8:6] (highest order 3 bits) identify the hash register
-+     * and H[5:1] (next 5 bits) identify the hash bit
-+     * if ghts = 1 H[8:5] (highest order 4 bits) identify the hash register
-+     * and H[4:0] (next 5 bits) identify the hash bit.
-+     *
-+     * In bucket index output the low 5 bits identify the hash register bit,
-+     * while the higher 4 bits identify the hash register
-+     */
-+
-+    if (ghtx)
-+        bucket = (int32_t)((crc >> 23) & 0x1ff);
-+    else {
-+        bucket = (int32_t)((crc >> 24) & 0xff);
-+        /* if !ghtx and mcast the bit must be set in gaddr instead of igaddr. */
-+        if (mcast)
-+            bucket += 0x100;
-+    }
-+
-+    fman_dtsec_set_bucket(p_Dtsec->p_MemMap, bucket, TRUE);
-+
-+    /* Create element to be added to the driver hash table */
-+    p_HashEntry = (t_EthHashEntry *)XX_Malloc(sizeof(t_EthHashEntry));
-+    p_HashEntry->addr = ethAddr;
-+    INIT_LIST(&p_HashEntry->node);
-+
-+    if (ethAddr & MAC_GROUP_ADDRESS)
-+        /* Group Address */
-+        LIST_AddToTail(&(p_HashEntry->node), &(p_Dtsec->p_MulticastAddrHash->p_Lsts[bucket]));
-+    else
-+        LIST_AddToTail(&(p_HashEntry->node), &(p_Dtsec->p_UnicastAddrHash->p_Lsts[bucket]));
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecDelHashMacAddress(t_Handle h_Dtsec, t_EnetAddr *p_EthAddr)
-+{
-+    t_Dtsec         *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+    t_List          *p_Pos;
-+    t_EthHashEntry  *p_HashEntry = NULL;
-+    uint64_t        ethAddr;
-+    int32_t         bucket;
-+    uint32_t        crc;
-+    bool            mcast, ghtx;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    ethAddr = ENET_ADDR_TO_UINT64(*p_EthAddr);
-+
-+    ghtx = (bool)((fman_dtsec_get_rctrl(p_Dtsec->p_MemMap) & RCTRL_GHTX) ? TRUE : FALSE);
-+    mcast = (bool)((ethAddr & MAC_GROUP_ADDRESS) ? TRUE : FALSE);
-+
-+    if (ghtx && !mcast) /* Cannot handle unicast mac addr when GHTX is on */
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Could not compute hash bucket"));
-+
-+    crc = GetMacAddrHashCode(ethAddr);
-+
-+    if (ghtx)
-+        bucket = (int32_t)((crc >> 23) & 0x1ff);
-+    else {
-+        bucket = (int32_t)((crc >> 24) & 0xff);
-+        /* if !ghtx and mcast the bit must be set in gaddr instead of igaddr. */
-+        if (mcast)
-+            bucket += 0x100;
-+    }
-+
-+    if (ethAddr & MAC_GROUP_ADDRESS)
-+    {
-+        /* Group Address */
-+        LIST_FOR_EACH(p_Pos, &(p_Dtsec->p_MulticastAddrHash->p_Lsts[bucket]))
-+        {
-+            p_HashEntry = ETH_HASH_ENTRY_OBJ(p_Pos);
-+            if (p_HashEntry->addr == ethAddr)
-+            {
-+                LIST_DelAndInit(&p_HashEntry->node);
-+                XX_Free(p_HashEntry);
-+                break;
-+            }
-+        }
-+        if (LIST_IsEmpty(&p_Dtsec->p_MulticastAddrHash->p_Lsts[bucket]))
-+            fman_dtsec_set_bucket(p_Dtsec->p_MemMap, bucket, FALSE);
-+    }
-+    else
-+    {
-+        /* Individual Address */
-+        LIST_FOR_EACH(p_Pos, &(p_Dtsec->p_UnicastAddrHash->p_Lsts[bucket]))
-+        {
-+            p_HashEntry = ETH_HASH_ENTRY_OBJ(p_Pos);
-+            if (p_HashEntry->addr == ethAddr)
-+            {
-+                LIST_DelAndInit(&p_HashEntry->node);
-+                XX_Free(p_HashEntry);
-+                break;
-+            }
-+        }
-+        if (LIST_IsEmpty(&p_Dtsec->p_UnicastAddrHash->p_Lsts[bucket]))
-+            fman_dtsec_set_bucket(p_Dtsec->p_MemMap, bucket, FALSE);
-+    }
-+
-+    /* address does not exist */
-+    ASSERT_COND(p_HashEntry != NULL);
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecSetPromiscuous(t_Handle h_Dtsec, bool newVal)
-+{
-+    t_Dtsec     *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    fman_dtsec_set_uc_promisc(p_Dtsec->p_MemMap, newVal);
-+    fman_dtsec_set_mc_promisc(p_Dtsec->p_MemMap, newVal);
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecSetStatistics(t_Handle h_Dtsec, e_FmMacStatisticsLevel statisticsLevel)
-+{
-+    t_Dtsec     *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+    t_Error     err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    p_Dtsec->statisticsLevel = statisticsLevel;
-+
-+    err = (t_Error)fman_dtsec_set_stat_level(p_Dtsec->p_MemMap,
-+                                        (enum dtsec_stat_level)statisticsLevel);
-+    if (err != E_OK)
-+        return err;
-+
-+    switch (statisticsLevel)
-+    {
-+    case (e_FM_MAC_NONE_STATISTICS):
-+            p_Dtsec->exceptions &= ~DTSEC_IMASK_MSROEN;
-+            break;
-+    case (e_FM_MAC_PARTIAL_STATISTICS):
-+            p_Dtsec->exceptions |= DTSEC_IMASK_MSROEN;
-+            break;
-+    case (e_FM_MAC_FULL_STATISTICS):
-+            p_Dtsec->exceptions |= DTSEC_IMASK_MSROEN;
-+            break;
-+        default:
-+            RETURN_ERROR(MINOR, E_INVALID_SELECTION, NO_MSG);
-+    }
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecSetWakeOnLan(t_Handle h_Dtsec, bool en)
-+{
-+    t_Dtsec         *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    fman_dtsec_set_wol(p_Dtsec->p_MemMap, en);
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecAdjustLink(t_Handle h_Dtsec, e_EnetSpeed speed, bool fullDuplex)
-+{
-+    t_Dtsec             *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+    int                 err;
-+    enum enet_interface enet_interface;
-+    enum enet_speed     enet_speed;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    p_Dtsec->enetMode = MAKE_ENET_MODE(ENET_INTERFACE_FROM_MODE(p_Dtsec->enetMode), speed);
-+    enet_interface = (enum enet_interface) ENET_INTERFACE_FROM_MODE(p_Dtsec->enetMode);
-+    enet_speed = (enum enet_speed) ENET_SPEED_FROM_MODE(p_Dtsec->enetMode);
-+    p_Dtsec->halfDuplex = !fullDuplex;
-+
-+    err = fman_dtsec_adjust_link(p_Dtsec->p_MemMap, enet_interface, enet_speed, fullDuplex);
-+
-+    if (err == -EINVAL)
-+        RETURN_ERROR(MAJOR, E_CONFLICT, ("Ethernet interface does not support Half Duplex mode"));
-+
-+    return (t_Error)err;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecRestartAutoneg(t_Handle h_Dtsec)
-+{
-+    t_Dtsec      *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+    uint16_t     tmpReg16;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    DTSEC_MII_ReadPhyReg(p_Dtsec, p_Dtsec->tbi_phy_addr, 0, &tmpReg16);
-+
-+    tmpReg16 &= ~( PHY_CR_SPEED0 | PHY_CR_SPEED1 );
-+    tmpReg16 |= (PHY_CR_ANE | PHY_CR_RESET_AN | PHY_CR_FULLDUPLEX | PHY_CR_SPEED1);
-+
-+    DTSEC_MII_WritePhyReg(p_Dtsec, p_Dtsec->tbi_phy_addr, 0, tmpReg16);
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecGetId(t_Handle h_Dtsec, uint32_t *macId)
-+{
-+    t_Dtsec     *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    *macId = p_Dtsec->macId;
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecGetVersion(t_Handle h_Dtsec, uint32_t *macVersion)
-+{
-+    t_Dtsec     *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    *macVersion = fman_dtsec_get_revision(p_Dtsec->p_MemMap);
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecSetException(t_Handle h_Dtsec, e_FmMacExceptions exception, bool enable)
-+{
-+    t_Dtsec     *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+    uint32_t    bitMask = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+
-+    if (exception != e_FM_MAC_EX_1G_1588_TS_RX_ERR)
-+    {
-+        GET_EXCEPTION_FLAG(bitMask, exception);
-+        if (bitMask)
-+        {
-+            if (enable)
-+                p_Dtsec->exceptions |= bitMask;
-+            else
-+                p_Dtsec->exceptions &= ~bitMask;
-+        }
-+        else
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Undefined exception"));
-+
-+        if (enable)
-+            fman_dtsec_enable_interrupt(p_Dtsec->p_MemMap, bitMask);
-+        else
-+            fman_dtsec_disable_interrupt(p_Dtsec->p_MemMap, bitMask);
-+    }
-+    else
-+    {
-+        if (!p_Dtsec->ptpTsuEnabled)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Exception valid for 1588 only"));
-+
-+        if (enable)
-+        {
-+            p_Dtsec->enTsuErrExeption = TRUE;
-+            fman_dtsec_enable_tmr_interrupt(p_Dtsec->p_MemMap);
-+        }
-+        else
-+        {
-+            p_Dtsec->enTsuErrExeption = FALSE;
-+            fman_dtsec_disable_tmr_interrupt(p_Dtsec->p_MemMap);
-+        }
-+    }
-+
-+    return E_OK;
-+}
-+
-+
-+/*****************************************************************************/
-+/*                      dTSEC Init & Free API                                   */
-+/*****************************************************************************/
-+
-+/* .............................................................................. */
-+
-+static t_Error DtsecInit(t_Handle h_Dtsec)
-+{
-+    t_Dtsec             *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+    struct dtsec_cfg    *p_DtsecDriverParam;
-+    t_Error             err;
-+    uint16_t            maxFrmLn;
-+    enum enet_interface enet_interface;
-+    enum enet_speed     enet_speed;
-+    t_EnetAddr          ethAddr;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec->fmMacControllerDriver.h_Fm, E_INVALID_HANDLE);
-+
-+    FM_GetRevision(p_Dtsec->fmMacControllerDriver.h_Fm, &p_Dtsec->fmMacControllerDriver.fmRevInfo);
-+    CHECK_INIT_PARAMETERS(p_Dtsec, CheckInitParameters);
-+
-+    p_DtsecDriverParam  = p_Dtsec->p_DtsecDriverParam;
-+    p_Dtsec->halfDuplex = p_DtsecDriverParam->halfdup_on;
-+
-+    enet_interface = (enum enet_interface)ENET_INTERFACE_FROM_MODE(p_Dtsec->enetMode);
-+    enet_speed = (enum enet_speed)ENET_SPEED_FROM_MODE(p_Dtsec->enetMode);
-+    MAKE_ENET_ADDR_FROM_UINT64(p_Dtsec->addr, ethAddr);
-+
-+    err = (t_Error)fman_dtsec_init(p_Dtsec->p_MemMap,
-+                              p_DtsecDriverParam,
-+                              enet_interface,
-+                              enet_speed,
-+                              (uint8_t*)ethAddr,
-+                              p_Dtsec->fmMacControllerDriver.fmRevInfo.majorRev,
-+                              p_Dtsec->fmMacControllerDriver.fmRevInfo.minorRev,
-+                              p_Dtsec->exceptions);
-+    if (err)
-+    {
-+        FreeInitResources(p_Dtsec);
-+        RETURN_ERROR(MAJOR, err, ("This DTSEC version does not support the required i/f mode"));
-+    }
-+
-+    if (ENET_INTERFACE_FROM_MODE(p_Dtsec->enetMode) == e_ENET_IF_SGMII)
-+    {
-+        uint16_t            tmpReg16;
-+
-+        /* Configure the TBI PHY Control Register */
-+        tmpReg16 = PHY_TBICON_CLK_SEL | PHY_TBICON_SRESET;
-+        DTSEC_MII_WritePhyReg(p_Dtsec, (uint8_t)p_DtsecDriverParam->tbipa, 17, tmpReg16);
-+
-+        tmpReg16 = PHY_TBICON_CLK_SEL;
-+        DTSEC_MII_WritePhyReg(p_Dtsec, (uint8_t)p_DtsecDriverParam->tbipa, 17, tmpReg16);
-+
-+        tmpReg16 = (PHY_CR_PHY_RESET | PHY_CR_ANE | PHY_CR_FULLDUPLEX | PHY_CR_SPEED1);
-+        DTSEC_MII_WritePhyReg(p_Dtsec, (uint8_t)p_DtsecDriverParam->tbipa, 0, tmpReg16);
-+
-+        if (p_Dtsec->enetMode & ENET_IF_SGMII_BASEX)
-+            tmpReg16 = PHY_TBIANA_1000X;
-+        else
-+            tmpReg16 = PHY_TBIANA_SGMII;
-+        DTSEC_MII_WritePhyReg(p_Dtsec, (uint8_t)p_DtsecDriverParam->tbipa, 4, tmpReg16);
-+
-+        tmpReg16 = (PHY_CR_ANE | PHY_CR_RESET_AN | PHY_CR_FULLDUPLEX | PHY_CR_SPEED1);
-+
-+        DTSEC_MII_WritePhyReg(p_Dtsec, (uint8_t)p_DtsecDriverParam->tbipa, 0, tmpReg16);
-+    }
-+
-+    /* Max Frame Length */
-+    maxFrmLn = fman_dtsec_get_max_frame_len(p_Dtsec->p_MemMap);
-+    err = FmSetMacMaxFrame(p_Dtsec->fmMacControllerDriver.h_Fm, e_FM_MAC_1G,
-+            p_Dtsec->fmMacControllerDriver.macId, maxFrmLn);
-+    if (err)
-+        RETURN_ERROR(MINOR,err, NO_MSG);
-+
-+    p_Dtsec->p_MulticastAddrHash = AllocHashTable(EXTENDED_HASH_TABLE_SIZE);
-+    if (!p_Dtsec->p_MulticastAddrHash) {
-+        FreeInitResources(p_Dtsec);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MC hash table is FAILED"));
-+    }
-+
-+    p_Dtsec->p_UnicastAddrHash = AllocHashTable(HASH_TABLE_SIZE);
-+    if (!p_Dtsec->p_UnicastAddrHash)
-+    {
-+        FreeInitResources(p_Dtsec);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("UC hash table is FAILED"));
-+    }
-+
-+    /* register err intr handler for dtsec to FPM (err)*/
-+    FmRegisterIntr(p_Dtsec->fmMacControllerDriver.h_Fm,
-+                   e_FM_MOD_1G_MAC,
-+                   p_Dtsec->macId,
-+                   e_FM_INTR_TYPE_ERR,
-+                   DtsecIsr,
-+                   p_Dtsec);
-+    /* register 1588 intr handler for TMR to FPM (normal)*/
-+    FmRegisterIntr(p_Dtsec->fmMacControllerDriver.h_Fm,
-+                   e_FM_MOD_1G_MAC,
-+                   p_Dtsec->macId,
-+                   e_FM_INTR_TYPE_NORMAL,
-+                   Dtsec1588Isr,
-+                   p_Dtsec);
-+    /* register normal intr handler for dtsec to main interrupt controller. */
-+    if (p_Dtsec->mdioIrq != NO_IRQ)
-+    {
-+        XX_SetIntr(p_Dtsec->mdioIrq, DtsecMdioIsr, p_Dtsec);
-+        XX_EnableIntr(p_Dtsec->mdioIrq);
-+    }
-+
-+    XX_Free(p_DtsecDriverParam);
-+    p_Dtsec->p_DtsecDriverParam = NULL;
-+
-+    err = DtsecSetStatistics(h_Dtsec, e_FM_MAC_FULL_STATISTICS);
-+    if (err)
-+    {
-+        FreeInitResources(p_Dtsec);
-+        RETURN_ERROR(MAJOR, err, ("Undefined statistics level"));
-+    }
-+
-+    return E_OK;
-+}
-+
-+/* ........................................................................... */
-+
-+static t_Error DtsecFree(t_Handle h_Dtsec)
-+{
-+    t_Dtsec      *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+
-+    if (p_Dtsec->p_DtsecDriverParam)
-+    {
-+        /* Called after config */
-+        XX_Free(p_Dtsec->p_DtsecDriverParam);
-+        p_Dtsec->p_DtsecDriverParam = NULL;
-+    }
-+    else
-+        /* Called after init */
-+        FreeInitResources(p_Dtsec);
-+
-+    XX_Free(p_Dtsec);
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static void InitFmMacControllerDriver(t_FmMacControllerDriver *p_FmMacControllerDriver)
-+{
-+    p_FmMacControllerDriver->f_FM_MAC_Init                      = DtsecInit;
-+    p_FmMacControllerDriver->f_FM_MAC_Free                      = DtsecFree;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_SetStatistics             = DtsecSetStatistics;
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigLoopback            = DtsecConfigLoopback;
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigMaxFrameLength      = DtsecConfigMaxFrameLength;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigWan                 = NULL; /* Not supported on dTSEC */
-+
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigPadAndCrc           = DtsecConfigPadAndCrc;
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigHalfDuplex          = DtsecConfigHalfDuplex;
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigLengthCheck         = DtsecConfigLengthCheck;
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigTbiPhyAddr          = DtsecConfigTbiPhyAddr;
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigException           = DtsecConfigException;
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigResetOnInit         = NULL;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_Enable                    = DtsecEnable;
-+    p_FmMacControllerDriver->f_FM_MAC_Disable                   = DtsecDisable;
-+    p_FmMacControllerDriver->f_FM_MAC_Resume                    = NULL;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_SetException              = DtsecSetException;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_SetPromiscuous            = DtsecSetPromiscuous;
-+    p_FmMacControllerDriver->f_FM_MAC_AdjustLink                = DtsecAdjustLink;
-+    p_FmMacControllerDriver->f_FM_MAC_SetWakeOnLan              = DtsecSetWakeOnLan;
-+    p_FmMacControllerDriver->f_FM_MAC_RestartAutoneg            = DtsecRestartAutoneg;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_Enable1588TimeStamp       = DtsecEnable1588TimeStamp;
-+    p_FmMacControllerDriver->f_FM_MAC_Disable1588TimeStamp      = DtsecDisable1588TimeStamp;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_SetTxAutoPauseFrames      = DtsecTxMacPause;
-+    p_FmMacControllerDriver->f_FM_MAC_SetTxPauseFrames          = DtsecSetTxPauseFrames;
-+    p_FmMacControllerDriver->f_FM_MAC_SetRxIgnorePauseFrames    = DtsecRxIgnoreMacPause;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_ResetCounters             = DtsecResetCounters;
-+    p_FmMacControllerDriver->f_FM_MAC_GetStatistics             = DtsecGetStatistics;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_ModifyMacAddr             = DtsecModifyMacAddress;
-+    p_FmMacControllerDriver->f_FM_MAC_AddHashMacAddr            = DtsecAddHashMacAddress;
-+    p_FmMacControllerDriver->f_FM_MAC_RemoveHashMacAddr         = DtsecDelHashMacAddress;
-+    p_FmMacControllerDriver->f_FM_MAC_AddExactMatchMacAddr      = DtsecAddExactMatchMacAddress;
-+    p_FmMacControllerDriver->f_FM_MAC_RemovelExactMatchMacAddr  = DtsecDelExactMatchMacAddress;
-+    p_FmMacControllerDriver->f_FM_MAC_GetId                     = DtsecGetId;
-+    p_FmMacControllerDriver->f_FM_MAC_GetVersion                = DtsecGetVersion;
-+    p_FmMacControllerDriver->f_FM_MAC_GetMaxFrameLength         = DtsecGetMaxFrameLength;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_MII_WritePhyReg           = DTSEC_MII_WritePhyReg;
-+    p_FmMacControllerDriver->f_FM_MAC_MII_ReadPhyReg            = DTSEC_MII_ReadPhyReg;
-+
-+}
-+
-+
-+/*****************************************************************************/
-+/*                      dTSEC Config Main Entry                             */
-+/*****************************************************************************/
-+
-+/* .............................................................................. */
-+
-+t_Handle  DTSEC_Config(t_FmMacParams *p_FmMacParam)
-+{
-+    t_Dtsec             *p_Dtsec;
-+    struct dtsec_cfg    *p_DtsecDriverParam;
-+    uintptr_t           baseAddr;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmMacParam, E_NULL_POINTER, NULL);
-+
-+    baseAddr = p_FmMacParam->baseAddr;
-+
-+    /* allocate memory for the UCC GETH data structure. */
-+    p_Dtsec = (t_Dtsec *)XX_Malloc(sizeof(t_Dtsec));
-+    if (!p_Dtsec)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("dTSEC driver structure"));
-+        return NULL;
-+    }
-+    memset(p_Dtsec, 0, sizeof(t_Dtsec));
-+    InitFmMacControllerDriver(&p_Dtsec->fmMacControllerDriver);
-+
-+    /* allocate memory for the dTSEC driver parameters data structure. */
-+    p_DtsecDriverParam = (struct dtsec_cfg *) XX_Malloc(sizeof(struct dtsec_cfg));
-+    if (!p_DtsecDriverParam)
-+    {
-+        XX_Free(p_Dtsec);
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("dTSEC driver parameters"));
-+        return NULL;
-+    }
-+    memset(p_DtsecDriverParam, 0, sizeof(struct dtsec_cfg));
-+
-+    /* Plant parameter structure pointer */
-+    p_Dtsec->p_DtsecDriverParam = p_DtsecDriverParam;
-+
-+    fman_dtsec_defconfig(p_DtsecDriverParam);
-+
-+    p_Dtsec->p_MemMap           = (struct dtsec_regs *)UINT_TO_PTR(baseAddr);
-+    p_Dtsec->p_MiiMemMap        = (struct dtsec_mii_reg *)UINT_TO_PTR(baseAddr + DTSEC_TO_MII_OFFSET);
-+    p_Dtsec->addr               = ENET_ADDR_TO_UINT64(p_FmMacParam->addr);
-+    p_Dtsec->enetMode           = p_FmMacParam->enetMode;
-+    p_Dtsec->macId              = p_FmMacParam->macId;
-+    p_Dtsec->exceptions         = DEFAULT_exceptions;
-+    p_Dtsec->mdioIrq            = p_FmMacParam->mdioIrq;
-+    p_Dtsec->f_Exception        = p_FmMacParam->f_Exception;
-+    p_Dtsec->f_Event            = p_FmMacParam->f_Event;
-+    p_Dtsec->h_App              = p_FmMacParam->h_App;
-+    p_Dtsec->ptpTsuEnabled      = p_Dtsec->p_DtsecDriverParam->ptp_tsu_en;
-+    p_Dtsec->enTsuErrExeption   = p_Dtsec->p_DtsecDriverParam->ptp_exception_en;
-+    p_Dtsec->tbi_phy_addr       = p_Dtsec->p_DtsecDriverParam->tbi_phy_addr;
-+
-+    return p_Dtsec;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/dtsec.h
-@@ -0,0 +1,228 @@
-+/*
-+ * Copyright 2008-2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/******************************************************************************
-+ @File          dtsec.h
-+
-+ @Description   FM dTSEC ...
-+*//***************************************************************************/
-+#ifndef __DTSEC_H
-+#define __DTSEC_H
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "list_ext.h"
-+#include "enet_ext.h"
-+
-+#include "dtsec_mii_acc.h"
-+#include "fm_mac.h"
-+
-+
-+#define DEFAULT_exceptions            \
-+    ((uint32_t)(DTSEC_IMASK_BREN    | \
-+                DTSEC_IMASK_RXCEN   | \
-+                DTSEC_IMASK_BTEN    | \
-+                DTSEC_IMASK_TXCEN   | \
-+                DTSEC_IMASK_TXEEN   | \
-+                DTSEC_IMASK_ABRTEN  | \
-+                DTSEC_IMASK_LCEN    | \
-+                DTSEC_IMASK_CRLEN   | \
-+                DTSEC_IMASK_XFUNEN  | \
-+                DTSEC_IMASK_IFERREN | \
-+                DTSEC_IMASK_MAGEN   | \
-+                DTSEC_IMASK_TDPEEN  | \
-+                DTSEC_IMASK_RDPEEN))
-+
-+#define GET_EXCEPTION_FLAG(bitMask, exception)  switch (exception){ \
-+    case e_FM_MAC_EX_1G_BAB_RX:                                     \
-+        bitMask = DTSEC_IMASK_BREN; break;                          \
-+    case e_FM_MAC_EX_1G_RX_CTL:                                     \
-+        bitMask = DTSEC_IMASK_RXCEN; break;                         \
-+    case e_FM_MAC_EX_1G_GRATEFUL_TX_STP_COMPLET:                    \
-+        bitMask = DTSEC_IMASK_GTSCEN ; break;                       \
-+    case e_FM_MAC_EX_1G_BAB_TX:                                     \
-+        bitMask = DTSEC_IMASK_BTEN   ; break;                       \
-+    case e_FM_MAC_EX_1G_TX_CTL:                                     \
-+        bitMask = DTSEC_IMASK_TXCEN  ; break;                       \
-+    case e_FM_MAC_EX_1G_TX_ERR:                                     \
-+        bitMask = DTSEC_IMASK_TXEEN  ; break;                       \
-+    case e_FM_MAC_EX_1G_LATE_COL:                                   \
-+        bitMask = DTSEC_IMASK_LCEN   ; break;                       \
-+    case e_FM_MAC_EX_1G_COL_RET_LMT:                                \
-+        bitMask = DTSEC_IMASK_CRLEN  ; break;                       \
-+    case e_FM_MAC_EX_1G_TX_FIFO_UNDRN:                              \
-+        bitMask = DTSEC_IMASK_XFUNEN ; break;                       \
-+    case e_FM_MAC_EX_1G_MAG_PCKT:                                   \
-+        bitMask = DTSEC_IMASK_MAGEN ; break;                        \
-+    case e_FM_MAC_EX_1G_MII_MNG_RD_COMPLET:                         \
-+        bitMask = DTSEC_IMASK_MMRDEN; break;                        \
-+    case e_FM_MAC_EX_1G_MII_MNG_WR_COMPLET:                         \
-+        bitMask = DTSEC_IMASK_MMWREN  ; break;                      \
-+    case e_FM_MAC_EX_1G_GRATEFUL_RX_STP_COMPLET:                    \
-+        bitMask = DTSEC_IMASK_GRSCEN; break;                        \
-+    case e_FM_MAC_EX_1G_TX_DATA_ERR:                                \
-+        bitMask = DTSEC_IMASK_TDPEEN; break;                        \
-+    case e_FM_MAC_EX_1G_RX_MIB_CNT_OVFL:                            \
-+        bitMask = DTSEC_IMASK_MSROEN ; break;                       \
-+    default: bitMask = 0;break;}
-+
-+
-+#define MAX_PACKET_ALIGNMENT        31
-+#define MAX_INTER_PACKET_GAP        0x7f
-+#define MAX_INTER_PALTERNATE_BEB    0x0f
-+#define MAX_RETRANSMISSION          0x0f
-+#define MAX_COLLISION_WINDOW        0x03ff
-+
-+
-+/********************* From mac ext ******************************************/
-+typedef  uint32_t t_ErrorDisable;
-+
-+#define ERROR_DISABLE_TRANSMIT              0x00400000
-+#define ERROR_DISABLE_LATE_COLLISION        0x00040000
-+#define ERROR_DISABLE_COLLISION_RETRY_LIMIT 0x00020000
-+#define ERROR_DISABLE_TxFIFO_UNDERRUN       0x00010000
-+#define ERROR_DISABLE_TxABORT               0x00008000
-+#define ERROR_DISABLE_INTERFACE             0x00004000
-+#define ERROR_DISABLE_TxDATA_PARITY         0x00000002
-+#define ERROR_DISABLE_RxDATA_PARITY         0x00000001
-+
-+/*****************************************************************************/
-+#define DTSEC_NUM_OF_PADDRS             15  /* number of pattern match registers (entries) */
-+
-+#define GROUP_ADDRESS                   0x0000010000000000LL /* Group address bit indication */
-+
-+#define HASH_TABLE_SIZE                 256 /* Hash table size (= 32 bits * 8 regs) */
-+
-+#define HASH_TABLE_SIZE                 256 /* Hash table size (32 bits * 8 regs) */
-+#define EXTENDED_HASH_TABLE_SIZE        512 /* Extended Hash table size (32 bits * 16 regs) */
-+
-+#define DTSEC_TO_MII_OFFSET             0x1000  /* number of pattern match registers (entries) */
-+
-+#define MAX_PHYS                    32 /* maximum number of phys */
-+
-+#define     VAL32BIT    0x100000000LL
-+#define     VAL22BIT    0x00400000
-+#define     VAL16BIT    0x00010000
-+#define     VAL12BIT    0x00001000
-+
-+/* CAR1/2 bits */
-+#define CAR1_TR64   0x80000000
-+#define CAR1_TR127  0x40000000
-+#define CAR1_TR255  0x20000000
-+#define CAR1_TR511  0x10000000
-+#define CAR1_TRK1   0x08000000
-+#define CAR1_TRMAX  0x04000000
-+#define CAR1_TRMGV  0x02000000
-+
-+#define CAR1_RBYT   0x00010000
-+#define CAR1_RPKT   0x00008000
-+#define CAR1_RMCA   0x00002000
-+#define CAR1_RBCA   0x00001000
-+#define CAR1_RXPF   0x00000400
-+#define CAR1_RALN   0x00000100
-+#define CAR1_RFLR   0x00000080
-+#define CAR1_RCDE   0x00000040
-+#define CAR1_RCSE   0x00000020
-+#define CAR1_RUND   0x00000010
-+#define CAR1_ROVR   0x00000008
-+#define CAR1_RFRG   0x00000004
-+#define CAR1_RJBR   0x00000002
-+#define CAR1_RDRP   0x00000001
-+
-+#define CAR2_TFCS   0x00040000
-+#define CAR2_TBYT   0x00002000
-+#define CAR2_TPKT   0x00001000
-+#define CAR2_TMCA   0x00000800
-+#define CAR2_TBCA   0x00000400
-+#define CAR2_TXPF   0x00000200
-+#define CAR2_TDRP   0x00000001
-+
-+typedef struct t_InternalStatistics
-+{
-+    uint64_t    tr64;
-+    uint64_t    tr127;
-+    uint64_t    tr255;
-+    uint64_t    tr511;
-+    uint64_t    tr1k;
-+    uint64_t    trmax;
-+    uint64_t    trmgv;
-+    uint64_t    rfrg;
-+    uint64_t    rjbr;
-+    uint64_t    rdrp;
-+    uint64_t    raln;
-+    uint64_t    rund;
-+    uint64_t    rovr;
-+    uint64_t    rxpf;
-+    uint64_t    txpf;
-+    uint64_t    rbyt;
-+    uint64_t    rpkt;
-+    uint64_t    rmca;
-+    uint64_t    rbca;
-+    uint64_t    rflr;
-+    uint64_t    rcde;
-+    uint64_t    rcse;
-+    uint64_t    tbyt;
-+    uint64_t    tpkt;
-+    uint64_t    tmca;
-+    uint64_t    tbca;
-+    uint64_t    tdrp;
-+    uint64_t    tfcs;
-+} t_InternalStatistics;
-+
-+typedef struct {
-+    t_FmMacControllerDriver     fmMacControllerDriver;
-+    t_Handle                    h_App;            /**< Handle to the upper layer application              */
-+    struct dtsec_regs           *p_MemMap;        /**< pointer to dTSEC memory mapped registers.          */
-+    struct dtsec_mii_reg        *p_MiiMemMap;     /**< pointer to dTSEC MII memory mapped registers.          */
-+    uint64_t                    addr;             /**< MAC address of device;                             */
-+    e_EnetMode                  enetMode;         /**< Ethernet physical interface  */
-+    t_FmMacExceptionCallback    *f_Exception;
-+    int                         mdioIrq;
-+    t_FmMacExceptionCallback    *f_Event;
-+    bool                        indAddrRegUsed[DTSEC_NUM_OF_PADDRS]; /**< Whether a particular individual address recognition register is being used */
-+    uint64_t                    paddr[DTSEC_NUM_OF_PADDRS]; /**< MAC address for particular individual address recognition register */
-+    uint8_t                     numOfIndAddrInRegs; /**< Number of individual addresses in registers for this station. */
-+    bool                        halfDuplex;
-+    t_InternalStatistics        internalStatistics;
-+    t_EthHash                   *p_MulticastAddrHash;      /* pointer to driver's global address hash table  */
-+    t_EthHash                   *p_UnicastAddrHash;    /* pointer to driver's individual address hash table  */
-+    uint8_t                     macId;
-+    uint8_t                     tbi_phy_addr;
-+    uint32_t                    exceptions;
-+    bool                        ptpTsuEnabled;
-+    bool                        enTsuErrExeption;
-+    e_FmMacStatisticsLevel      statisticsLevel;
-+    struct dtsec_cfg            *p_DtsecDriverParam;
-+} t_Dtsec;
-+
-+
-+#endif /* __DTSEC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/dtsec_mii_acc.c
-@@ -0,0 +1,97 @@
-+/*
-+ * Copyright 2008-2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          dtsec_mii_acc.c
-+
-+ @Description   FM dtsec MII register access MAC ...
-+*//***************************************************************************/
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+#include "fm_mac.h"
-+#include "dtsec.h"
-+#include "fsl_fman_dtsec_mii_acc.h"
-+
-+
-+/*****************************************************************************/
-+t_Error DTSEC_MII_WritePhyReg(t_Handle    h_Dtsec,
-+                              uint8_t     phyAddr,
-+                              uint8_t     reg,
-+                              uint16_t    data)
-+{
-+    t_Dtsec              *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+    struct dtsec_mii_reg *miiregs;
-+    uint16_t              dtsec_freq;
-+    t_Error                   err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec->p_MiiMemMap, E_INVALID_HANDLE);
-+
-+    dtsec_freq = (uint16_t)(p_Dtsec->fmMacControllerDriver.clkFreq >> 1);
-+    miiregs = p_Dtsec->p_MiiMemMap;
-+
-+    err = (t_Error)fman_dtsec_mii_write_reg(miiregs, phyAddr, reg, data, dtsec_freq);
-+
-+    return err;
-+}
-+
-+/*****************************************************************************/
-+t_Error DTSEC_MII_ReadPhyReg(t_Handle h_Dtsec,
-+                             uint8_t  phyAddr,
-+                             uint8_t  reg,
-+                             uint16_t *p_Data)
-+{
-+    t_Dtsec               *p_Dtsec = (t_Dtsec *)h_Dtsec;
-+    struct dtsec_mii_reg  *miiregs;
-+    uint16_t               dtsec_freq;
-+    t_Error                    err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Dtsec->p_MiiMemMap, E_INVALID_HANDLE);
-+
-+    dtsec_freq = (uint16_t)(p_Dtsec->fmMacControllerDriver.clkFreq >> 1);
-+    miiregs = p_Dtsec->p_MiiMemMap;
-+
-+    err = fman_dtsec_mii_read_reg(miiregs, phyAddr, reg, p_Data, dtsec_freq);
-+
-+    if (*p_Data == 0xffff)
-+        RETURN_ERROR(MINOR, E_NO_DEVICE,
-+                     ("Read wrong data (0xffff): phyAddr 0x%x, reg 0x%x",
-+                      phyAddr, reg));
-+    if (err)
-+        RETURN_ERROR(MINOR, (t_Error)err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/dtsec_mii_acc.h
-@@ -0,0 +1,42 @@
-+/*
-+ * Copyright 2008-2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __DTSEC_MII_ACC_H
-+#define __DTSEC_MII_ACC_H
-+
-+#include "std_ext.h"
-+
-+
-+t_Error DTSEC_MII_WritePhyReg(t_Handle h_Dtsec, uint8_t phyAddr, uint8_t reg, uint16_t data);
-+t_Error DTSEC_MII_ReadPhyReg(t_Handle  h_Dtsec, uint8_t phyAddr, uint8_t reg, uint16_t *p_Data);
-+
-+#endif /* __DTSEC_MII_ACC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fm_mac.c
-@@ -0,0 +1,658 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_mac.c
-+
-+ @Description   FM MAC ...
-+*//***************************************************************************/
-+#include "std_ext.h"
-+#include "string_ext.h"
-+#include "sprint_ext.h"
-+#include "error_ext.h"
-+#include "fm_ext.h"
-+
-+#include "fm_common.h"
-+#include "fm_mac.h"
-+
-+
-+/* ......................................................................... */
-+
-+t_Handle FM_MAC_Config (t_FmMacParams *p_FmMacParam)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver;
-+    uint16_t                fmClkFreq;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmMacParam, E_INVALID_HANDLE, NULL);
-+
-+    fmClkFreq = FmGetClockFreq(p_FmMacParam->h_Fm);
-+    if (fmClkFreq == 0)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Can't get clock for MAC!"));
-+        return NULL;
-+    }
-+
-+#if (DPAA_VERSION == 10)
-+    if (ENET_SPEED_FROM_MODE(p_FmMacParam->enetMode) < e_ENET_SPEED_10000)
-+        p_FmMacControllerDriver = (t_FmMacControllerDriver *)DTSEC_Config(p_FmMacParam);
-+    else
-+#if FM_MAX_NUM_OF_10G_MACS > 0
-+        p_FmMacControllerDriver = (t_FmMacControllerDriver *)TGEC_Config(p_FmMacParam);
-+#else
-+        p_FmMacControllerDriver = NULL;
-+#endif /* FM_MAX_NUM_OF_10G_MACS > 0 */
-+#else
-+    p_FmMacControllerDriver = (t_FmMacControllerDriver *)MEMAC_Config(p_FmMacParam);
-+#endif /* (DPAA_VERSION == 10) */
-+
-+    if (!p_FmMacControllerDriver)
-+        return NULL;
-+
-+    p_FmMacControllerDriver->h_Fm           = p_FmMacParam->h_Fm;
-+    p_FmMacControllerDriver->enetMode       = p_FmMacParam->enetMode;
-+    p_FmMacControllerDriver->macId          = p_FmMacParam->macId;
-+    p_FmMacControllerDriver->resetOnInit    = DEFAULT_resetOnInit;
-+
-+    p_FmMacControllerDriver->clkFreq        = fmClkFreq;
-+
-+    return (t_Handle)p_FmMacControllerDriver;
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_Init (t_Handle h_FmMac)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->resetOnInit &&
-+        !p_FmMacControllerDriver->f_FM_MAC_ConfigResetOnInit &&
-+        (FmResetMac(p_FmMacControllerDriver->h_Fm,
-+                    ((ENET_INTERFACE_FROM_MODE(p_FmMacControllerDriver->enetMode) == e_ENET_IF_XGMII) ?
-+                        e_FM_MAC_10G : e_FM_MAC_1G),
-+                    p_FmMacControllerDriver->macId) != E_OK))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Can't reset MAC!"));
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_Init)
-+        return p_FmMacControllerDriver->f_FM_MAC_Init(h_FmMac);
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_Free (t_Handle h_FmMac)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_Free)
-+        return p_FmMacControllerDriver->f_FM_MAC_Free(h_FmMac);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_ConfigResetOnInit (t_Handle h_FmMac, bool enable)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_ConfigResetOnInit)
-+        return p_FmMacControllerDriver->f_FM_MAC_ConfigResetOnInit(h_FmMac, enable);
-+
-+    p_FmMacControllerDriver->resetOnInit = enable;
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_ConfigLoopback (t_Handle h_FmMac, bool newVal)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_ConfigLoopback)
-+        return p_FmMacControllerDriver->f_FM_MAC_ConfigLoopback(h_FmMac, newVal);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_ConfigMaxFrameLength (t_Handle h_FmMac, uint16_t newVal)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_ConfigMaxFrameLength)
-+        return p_FmMacControllerDriver->f_FM_MAC_ConfigMaxFrameLength(h_FmMac, newVal);
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_ConfigWan (t_Handle h_FmMac, bool flag)
-+{
-+   t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_ConfigWan)
-+        return p_FmMacControllerDriver->f_FM_MAC_ConfigWan(h_FmMac, flag);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_ConfigPadAndCrc (t_Handle h_FmMac, bool newVal)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_ConfigPadAndCrc)
-+        return p_FmMacControllerDriver->f_FM_MAC_ConfigPadAndCrc(h_FmMac, newVal);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_ConfigHalfDuplex (t_Handle h_FmMac, bool newVal)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_ConfigHalfDuplex)
-+        return p_FmMacControllerDriver->f_FM_MAC_ConfigHalfDuplex(h_FmMac,newVal);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_ConfigTbiPhyAddr (t_Handle h_FmMac, uint8_t newVal)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_ConfigTbiPhyAddr)
-+        return p_FmMacControllerDriver->f_FM_MAC_ConfigTbiPhyAddr(h_FmMac,newVal);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_ConfigLengthCheck (t_Handle h_FmMac, bool newVal)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_ConfigLengthCheck)
-+        return p_FmMacControllerDriver->f_FM_MAC_ConfigLengthCheck(h_FmMac,newVal);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_ConfigException (t_Handle h_FmMac, e_FmMacExceptions ex, bool enable)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_ConfigException)
-+        return p_FmMacControllerDriver->f_FM_MAC_ConfigException(h_FmMac, ex, enable);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+#ifdef FM_TX_ECC_FRMS_ERRATA_10GMAC_A004
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_ConfigSkipFman11Workaround (t_Handle h_FmMac)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_ConfigSkipFman11Workaround)
-+        return p_FmMacControllerDriver->f_FM_MAC_ConfigSkipFman11Workaround(h_FmMac);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+#endif /* FM_TX_ECC_FRMS_ERRATA_10GMAC_A004 */
-+
-+
-+/*****************************************************************************/
-+/* Run Time Control                                                          */
-+/*****************************************************************************/
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_Enable  (t_Handle h_FmMac,  e_CommMode mode)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_Enable)
-+        return p_FmMacControllerDriver->f_FM_MAC_Enable(h_FmMac, mode);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_Disable (t_Handle h_FmMac, e_CommMode mode)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_Disable)
-+        return p_FmMacControllerDriver->f_FM_MAC_Disable(h_FmMac, mode);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MAC_Resume (t_Handle h_FmMac)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_Resume)
-+        return p_FmMacControllerDriver->f_FM_MAC_Resume(h_FmMac);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_Enable1588TimeStamp (t_Handle h_FmMac)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_Enable1588TimeStamp)
-+        return p_FmMacControllerDriver->f_FM_MAC_Enable1588TimeStamp(h_FmMac);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_Disable1588TimeStamp (t_Handle h_FmMac)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_Disable1588TimeStamp)
-+        return p_FmMacControllerDriver->f_FM_MAC_Disable1588TimeStamp(h_FmMac);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_SetTxAutoPauseFrames(t_Handle h_FmMac,
-+                                    uint16_t pauseTime)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_SetTxAutoPauseFrames)
-+        return p_FmMacControllerDriver->f_FM_MAC_SetTxAutoPauseFrames(h_FmMac,
-+                                                                      pauseTime);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_SetTxPauseFrames(t_Handle h_FmMac,
-+                                uint8_t  priority,
-+                                uint16_t pauseTime,
-+                                uint16_t threshTime)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_SetTxPauseFrames)
-+        return p_FmMacControllerDriver->f_FM_MAC_SetTxPauseFrames(h_FmMac,
-+                                                                  priority,
-+                                                                  pauseTime,
-+                                                                  threshTime);
-+
-+    RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_SetRxIgnorePauseFrames (t_Handle h_FmMac, bool en)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_SetRxIgnorePauseFrames)
-+        return p_FmMacControllerDriver->f_FM_MAC_SetRxIgnorePauseFrames(h_FmMac, en);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_SetWakeOnLan (t_Handle h_FmMac, bool en)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_SetWakeOnLan)
-+        return p_FmMacControllerDriver->f_FM_MAC_SetWakeOnLan(h_FmMac, en);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_ResetCounters (t_Handle h_FmMac)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_ResetCounters)
-+        return p_FmMacControllerDriver->f_FM_MAC_ResetCounters(h_FmMac);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_SetException(t_Handle h_FmMac, e_FmMacExceptions ex, bool enable)
-+{
-+   t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_SetException)
-+        return p_FmMacControllerDriver->f_FM_MAC_SetException(h_FmMac, ex, enable);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_SetStatistics (t_Handle h_FmMac, e_FmMacStatisticsLevel statisticsLevel)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_SetStatistics)
-+        return p_FmMacControllerDriver->f_FM_MAC_SetStatistics(h_FmMac, statisticsLevel);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_GetStatistics (t_Handle h_FmMac, t_FmMacStatistics *p_Statistics)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_GetStatistics)
-+        return p_FmMacControllerDriver->f_FM_MAC_GetStatistics(h_FmMac, p_Statistics);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_ModifyMacAddr (t_Handle h_FmMac, t_EnetAddr *p_EnetAddr)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_ModifyMacAddr)
-+        return p_FmMacControllerDriver->f_FM_MAC_ModifyMacAddr(h_FmMac, p_EnetAddr);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_AddHashMacAddr (t_Handle h_FmMac, t_EnetAddr *p_EnetAddr)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_AddHashMacAddr)
-+        return p_FmMacControllerDriver->f_FM_MAC_AddHashMacAddr(h_FmMac, p_EnetAddr);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_RemoveHashMacAddr (t_Handle h_FmMac, t_EnetAddr *p_EnetAddr)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_RemoveHashMacAddr)
-+        return p_FmMacControllerDriver->f_FM_MAC_RemoveHashMacAddr(h_FmMac, p_EnetAddr);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_AddExactMatchMacAddr (t_Handle h_FmMac, t_EnetAddr *p_EnetAddr)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_AddExactMatchMacAddr)
-+        return p_FmMacControllerDriver->f_FM_MAC_AddExactMatchMacAddr(h_FmMac, p_EnetAddr);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_RemovelExactMatchMacAddr (t_Handle h_FmMac, t_EnetAddr *p_EnetAddr)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_RemovelExactMatchMacAddr)
-+        return p_FmMacControllerDriver->f_FM_MAC_RemovelExactMatchMacAddr(h_FmMac, p_EnetAddr);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_GetVesrion (t_Handle h_FmMac, uint32_t *macVresion)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_GetVersion)
-+        return p_FmMacControllerDriver->f_FM_MAC_GetVersion(h_FmMac, macVresion);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_GetId (t_Handle h_FmMac, uint32_t *macId)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_GetId)
-+        return p_FmMacControllerDriver->f_FM_MAC_GetId(h_FmMac, macId);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_SetPromiscuous (t_Handle h_FmMac, bool newVal)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_SetPromiscuous)
-+        return p_FmMacControllerDriver->f_FM_MAC_SetPromiscuous(h_FmMac, newVal);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_AdjustLink(t_Handle h_FmMac, e_EnetSpeed speed, bool fullDuplex)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_AdjustLink)
-+        return p_FmMacControllerDriver->f_FM_MAC_AdjustLink(h_FmMac, speed, fullDuplex);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_RestartAutoneg(t_Handle h_FmMac)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_RestartAutoneg)
-+        return p_FmMacControllerDriver->f_FM_MAC_RestartAutoneg(h_FmMac);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_MII_WritePhyReg (t_Handle h_FmMac, uint8_t phyAddr, uint8_t reg, uint16_t data)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_MII_WritePhyReg)
-+        return p_FmMacControllerDriver->f_FM_MAC_MII_WritePhyReg(h_FmMac, phyAddr, reg, data);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+t_Error FM_MAC_MII_ReadPhyReg(t_Handle h_FmMac,  uint8_t phyAddr, uint8_t reg, uint16_t *p_Data)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_MII_ReadPhyReg)
-+        return p_FmMacControllerDriver->f_FM_MAC_MII_ReadPhyReg(h_FmMac, phyAddr, reg, p_Data);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+uint16_t FM_MAC_GetMaxFrameLength(t_Handle h_FmMac)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmMacControllerDriver, E_INVALID_HANDLE, 0);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_GetMaxFrameLength)
-+        return p_FmMacControllerDriver->f_FM_MAC_GetMaxFrameLength(h_FmMac);
-+
-+    REPORT_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+    return 0;
-+}
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+/*****************************************************************************/
-+t_Error FM_MAC_DumpRegs(t_Handle h_FmMac)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_DumpRegs)
-+         return p_FmMacControllerDriver->f_FM_MAC_DumpRegs(h_FmMac);
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+#endif /* (defined(DEBUG_ERRORS) && ... */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fm_mac.h
-@@ -0,0 +1,225 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_mac.h
-+
-+ @Description   FM MAC ...
-+*//***************************************************************************/
-+#ifndef __FM_MAC_H
-+#define __FM_MAC_H
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "list_ext.h"
-+#include "fm_mac_ext.h"
-+#include "fm_common.h"
-+
-+
-+#define __ERR_MODULE__  MODULE_FM_MAC
-+
-+/**************************************************************************//**
-+ @Description       defaults
-+*//***************************************************************************/
-+
-+
-+#define DEFAULT_halfDuplex                  FALSE
-+#define DEFAULT_padAndCrcEnable             TRUE
-+#define DEFAULT_resetOnInit                 FALSE
-+
-+
-+typedef struct {
-+    uint64_t addr;      /* Ethernet Address  */
-+    t_List   node;
-+} t_EthHashEntry;
-+#define ETH_HASH_ENTRY_OBJ(ptr) LIST_OBJECT(ptr, t_EthHashEntry, node)
-+
-+typedef struct {
-+    uint16_t    size;
-+    t_List      *p_Lsts;
-+} t_EthHash;
-+
-+typedef struct {
-+    t_Error (*f_FM_MAC_Init) (t_Handle h_FmMac);
-+    t_Error (*f_FM_MAC_Free) (t_Handle h_FmMac);
-+
-+    t_Error (*f_FM_MAC_SetStatistics) (t_Handle h_FmMac, e_FmMacStatisticsLevel statisticsLevel);
-+    t_Error (*f_FM_MAC_ConfigLoopback) (t_Handle h_FmMac, bool newVal);
-+    t_Error (*f_FM_MAC_ConfigMaxFrameLength) (t_Handle h_FmMac, uint16_t newVal);
-+    t_Error (*f_FM_MAC_ConfigWan) (t_Handle h_FmMac, bool flag);
-+    t_Error (*f_FM_MAC_ConfigPadAndCrc) (t_Handle h_FmMac, bool newVal);
-+    t_Error (*f_FM_MAC_ConfigHalfDuplex) (t_Handle h_FmMac, bool newVal);
-+    t_Error (*f_FM_MAC_ConfigLengthCheck) (t_Handle h_FmMac, bool newVal);
-+    t_Error (*f_FM_MAC_ConfigTbiPhyAddr) (t_Handle h_FmMac, uint8_t newVal);
-+    t_Error (*f_FM_MAC_ConfigException) (t_Handle h_FmMac, e_FmMacExceptions, bool enable);
-+    t_Error (*f_FM_MAC_ConfigResetOnInit) (t_Handle h_FmMac, bool enable);
-+#ifdef FM_TX_ECC_FRMS_ERRATA_10GMAC_A004
-+    t_Error (*f_FM_MAC_ConfigSkipFman11Workaround) (t_Handle h_FmMac);
-+#endif /* FM_TX_ECC_FRMS_ERRATA_10GMAC_A004 */
-+
-+    t_Error (*f_FM_MAC_SetException) (t_Handle h_FmMac, e_FmMacExceptions ex, bool enable);
-+
-+    t_Error (*f_FM_MAC_Enable)  (t_Handle h_FmMac,  e_CommMode mode);
-+    t_Error (*f_FM_MAC_Disable) (t_Handle h_FmMac, e_CommMode mode);
-+    t_Error (*f_FM_MAC_Resume)  (t_Handle h_FmMac);
-+    t_Error (*f_FM_MAC_Enable1588TimeStamp) (t_Handle h_FmMac);
-+    t_Error (*f_FM_MAC_Disable1588TimeStamp) (t_Handle h_FmMac);
-+    t_Error (*f_FM_MAC_Reset)   (t_Handle h_FmMac, bool wait);
-+
-+    t_Error (*f_FM_MAC_SetTxAutoPauseFrames) (t_Handle h_FmMac,
-+                                              uint16_t pauseTime);
-+    t_Error (*f_FM_MAC_SetTxPauseFrames) (t_Handle h_FmMac,
-+                                          uint8_t  priority,
-+                                          uint16_t pauseTime,
-+                                          uint16_t threshTime);
-+    t_Error (*f_FM_MAC_SetRxIgnorePauseFrames) (t_Handle h_FmMac, bool en);
-+
-+    t_Error (*f_FM_MAC_ResetCounters) (t_Handle h_FmMac);
-+    t_Error (*f_FM_MAC_GetStatistics) (t_Handle h_FmMac, t_FmMacStatistics *p_Statistics);
-+
-+    t_Error (*f_FM_MAC_ModifyMacAddr) (t_Handle h_FmMac, t_EnetAddr *p_EnetAddr);
-+    t_Error (*f_FM_MAC_AddHashMacAddr) (t_Handle h_FmMac, t_EnetAddr *p_EnetAddr);
-+    t_Error (*f_FM_MAC_RemoveHashMacAddr) (t_Handle h_FmMac, t_EnetAddr *p_EnetAddr);
-+    t_Error (*f_FM_MAC_AddExactMatchMacAddr) (t_Handle h_FmMac, t_EnetAddr *p_EnetAddr);
-+    t_Error (*f_FM_MAC_RemovelExactMatchMacAddr) (t_Handle h_FmMac, t_EnetAddr *p_EnetAddr);
-+
-+    t_Error (*f_FM_MAC_SetPromiscuous) (t_Handle h_FmMac, bool newVal);
-+    t_Error (*f_FM_MAC_AdjustLink)     (t_Handle h_FmMac, e_EnetSpeed speed, bool fullDuplex);
-+    t_Error (*f_FM_MAC_RestartAutoneg) (t_Handle h_FmMac);
-+
-+    t_Error (*f_FM_MAC_SetWakeOnLan)   (t_Handle h_FmMac, bool en);
-+
-+    t_Error (*f_FM_MAC_GetId) (t_Handle h_FmMac, uint32_t *macId);
-+
-+    t_Error (*f_FM_MAC_GetVersion) (t_Handle h_FmMac, uint32_t *macVersion);
-+
-+    uint16_t (*f_FM_MAC_GetMaxFrameLength) (t_Handle h_FmMac);
-+
-+    t_Error (*f_FM_MAC_MII_WritePhyReg)(t_Handle h_FmMac, uint8_t phyAddr, uint8_t reg, uint16_t data);
-+    t_Error (*f_FM_MAC_MII_ReadPhyReg)(t_Handle h_FmMac,  uint8_t phyAddr, uint8_t reg, uint16_t *p_Data);
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+    t_Error (*f_FM_MAC_DumpRegs) (t_Handle h_FmMac);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+    t_Handle            h_Fm;
-+    t_FmRevisionInfo    fmRevInfo;
-+    e_EnetMode          enetMode;
-+    uint8_t             macId;
-+    bool                resetOnInit;
-+    uint16_t            clkFreq;
-+} t_FmMacControllerDriver;
-+
-+
-+#if (DPAA_VERSION == 10)
-+t_Handle    DTSEC_Config(t_FmMacParams *p_FmMacParam);
-+t_Handle    TGEC_Config(t_FmMacParams *p_FmMacParams);
-+#else
-+t_Handle    MEMAC_Config(t_FmMacParams *p_FmMacParam);
-+#endif /* (DPAA_VERSION == 10) */
-+uint16_t    FM_MAC_GetMaxFrameLength(t_Handle FmMac);
-+
-+
-+/* ........................................................................... */
-+
-+static __inline__ t_EthHashEntry *DequeueAddrFromHashEntry(t_List *p_AddrLst)
-+{
-+   t_EthHashEntry *p_HashEntry = NULL;
-+    if (!LIST_IsEmpty(p_AddrLst))
-+    {
-+        p_HashEntry = ETH_HASH_ENTRY_OBJ(p_AddrLst->p_Next);
-+        LIST_DelAndInit(&p_HashEntry->node);
-+    }
-+    return p_HashEntry;
-+}
-+
-+/* ........................................................................... */
-+
-+static __inline__ void FreeHashTable(t_EthHash *p_Hash)
-+{
-+    t_EthHashEntry  *p_HashEntry;
-+    int             i = 0;
-+
-+    if (p_Hash)
-+    {
-+        if  (p_Hash->p_Lsts)
-+        {
-+            for (i=0; i<p_Hash->size; i++)
-+            {
-+                p_HashEntry = DequeueAddrFromHashEntry(&p_Hash->p_Lsts[i]);
-+                while (p_HashEntry)
-+                {
-+                    XX_Free(p_HashEntry);
-+                    p_HashEntry = DequeueAddrFromHashEntry(&p_Hash->p_Lsts[i]);
-+                }
-+            }
-+
-+            XX_Free(p_Hash->p_Lsts);
-+        }
-+
-+        XX_Free(p_Hash);
-+    }
-+}
-+
-+/* ........................................................................... */
-+
-+static __inline__ t_EthHash * AllocHashTable(uint16_t size)
-+{
-+    uint32_t    i;
-+    t_EthHash *p_Hash;
-+
-+    /* Allocate address hash table */
-+    p_Hash = (t_EthHash *)XX_Malloc(sizeof(t_EthHash));
-+    if (!p_Hash)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("Address hash table"));
-+        return NULL;
-+    }
-+    p_Hash->size = size;
-+
-+    p_Hash->p_Lsts = (t_List *)XX_Malloc(p_Hash->size*sizeof(t_List));
-+    if (!p_Hash->p_Lsts)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("Address hash table"));
-+        XX_Free(p_Hash);
-+        return NULL;
-+    }
-+
-+    for (i=0 ; i<p_Hash->size; i++)
-+        INIT_LIST(&p_Hash->p_Lsts[i]);
-+
-+    return p_Hash;
-+}
-+
-+
-+#endif /* __FM_MAC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_crc32.c
-@@ -0,0 +1,119 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#include "fman_crc32.h"
-+#include "common/general.h"
-+
-+
-+/* precomputed CRC values for address hashing */
-+static const uint32_t crc_tbl[256] = {
-+	0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f,
-+	0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
-+	0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2,
-+	0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
-+	0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
-+	0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
-+	0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c,
-+	0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
-+	0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423,
-+	0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
-+	0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106,
-+	0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
-+	0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d,
-+	0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
-+	0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
-+	0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
-+	0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7,
-+	0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
-+	0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa,
-+	0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
-+	0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81,
-+	0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
-+	0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84,
-+	0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
-+	0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
-+	0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
-+	0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e,
-+	0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
-+	0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55,
-+	0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
-+	0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28,
-+	0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
-+	0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f,
-+	0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
-+	0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
-+	0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
-+	0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69,
-+	0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
-+	0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc,
-+	0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
-+	0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693,
-+	0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
-+	0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
-+};
-+
-+/* Get the mirrored value of a byte size number. (0x11010011 --> 0x11001011) */
-+static inline uint8_t get_mirror8(uint8_t n)
-+{
-+	uint8_t mirror[16] = {
-+		0x00, 0x08, 0x04, 0x0c, 0x02, 0x0a, 0x06, 0x0e,
-+		0x01, 0x09, 0x05, 0x0d, 0x03, 0x0b, 0x07, 0x0f
-+	};
-+	return (uint8_t)(((mirror[n & 0x0f] << 4) | (mirror[n >> 4])));
-+}
-+
-+static inline uint32_t get_mirror32(uint32_t n)
-+{
-+	return ((uint32_t)get_mirror8((uint8_t)(n))<<24) |
-+		((uint32_t)get_mirror8((uint8_t)(n>>8))<<16) |
-+		((uint32_t)get_mirror8((uint8_t)(n>>16))<<8) |
-+		((uint32_t)get_mirror8((uint8_t)(n>>24)));
-+}
-+
-+uint32_t get_mac_addr_crc(uint64_t _addr)
-+{
-+	uint32_t i;
-+	uint8_t  data;
-+	uint32_t crc;
-+
-+	/* CRC calculation */
-+	crc = 0xffffffff;
-+	for (i = 0; i < 6; i++) {
-+		data = (uint8_t)(_addr >> ((5-i)*8));
-+		crc = crc ^ data;
-+		crc = crc_tbl[crc&0xff] ^ (crc>>8);
-+	}
-+
-+	crc = get_mirror32(crc);
-+	return crc;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_crc32.h
-@@ -0,0 +1,43 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#ifndef __FMAN_CRC32_H
-+#define __FMAN_CRC32_H
-+
-+#include "common/general.h"
-+
-+
-+uint32_t get_mac_addr_crc(uint64_t _addr);
-+
-+
-+#endif /* __FMAN_CRC32_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_dtsec.c
-@@ -0,0 +1,845 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#include "fsl_fman_dtsec.h"
-+
-+
-+void fman_dtsec_stop_rx(struct dtsec_regs *regs)
-+{
-+	/* Assert the graceful stop bit */
-+	iowrite32be(ioread32be(&regs->rctrl) | RCTRL_GRS, &regs->rctrl);
-+}
-+
-+void fman_dtsec_stop_tx(struct dtsec_regs *regs)
-+{
-+	/* Assert the graceful stop bit */
-+	iowrite32be(ioread32be(&regs->tctrl) | DTSEC_TCTRL_GTS, &regs->tctrl);
-+}
-+
-+void fman_dtsec_start_tx(struct dtsec_regs *regs)
-+{
-+	/* clear the graceful stop bit */
-+	iowrite32be(ioread32be(&regs->tctrl) & ~DTSEC_TCTRL_GTS, &regs->tctrl);
-+}
-+
-+void fman_dtsec_start_rx(struct dtsec_regs *regs)
-+{
-+	/* clear the graceful stop bit */
-+	iowrite32be(ioread32be(&regs->rctrl) & ~RCTRL_GRS, &regs->rctrl);
-+}
-+
-+void fman_dtsec_defconfig(struct dtsec_cfg *cfg)
-+{
-+	cfg->halfdup_on = DEFAULT_HALFDUP_ON;
-+	cfg->halfdup_retransmit = DEFAULT_HALFDUP_RETRANSMIT;
-+	cfg->halfdup_coll_window = DEFAULT_HALFDUP_COLL_WINDOW;
-+	cfg->halfdup_excess_defer = DEFAULT_HALFDUP_EXCESS_DEFER;
-+	cfg->halfdup_no_backoff = DEFAULT_HALFDUP_NO_BACKOFF;
-+	cfg->halfdup_bp_no_backoff = DEFAULT_HALFDUP_BP_NO_BACKOFF;
-+	cfg->halfdup_alt_backoff_val = DEFAULT_HALFDUP_ALT_BACKOFF_VAL;
-+	cfg->halfdup_alt_backoff_en = DEFAULT_HALFDUP_ALT_BACKOFF_EN;
-+	cfg->rx_drop_bcast = DEFAULT_RX_DROP_BCAST;
-+	cfg->rx_short_frm = DEFAULT_RX_SHORT_FRM;
-+	cfg->rx_len_check = DEFAULT_RX_LEN_CHECK;
-+	cfg->tx_pad_crc = DEFAULT_TX_PAD_CRC;
-+	cfg->tx_crc = DEFAULT_TX_CRC;
-+	cfg->rx_ctrl_acc = DEFAULT_RX_CTRL_ACC;
-+	cfg->tx_pause_time = DEFAULT_TX_PAUSE_TIME;
-+	cfg->tbipa = DEFAULT_TBIPA; /* PHY address 0 is reserved (DPAA RM)*/
-+	cfg->rx_prepend = DEFAULT_RX_PREPEND;
-+	cfg->ptp_tsu_en = DEFAULT_PTP_TSU_EN;
-+	cfg->ptp_exception_en = DEFAULT_PTP_EXCEPTION_EN;
-+	cfg->preamble_len = DEFAULT_PREAMBLE_LEN;
-+	cfg->rx_preamble = DEFAULT_RX_PREAMBLE;
-+	cfg->tx_preamble = DEFAULT_TX_PREAMBLE;
-+	cfg->loopback = DEFAULT_LOOPBACK;
-+	cfg->rx_time_stamp_en = DEFAULT_RX_TIME_STAMP_EN;
-+	cfg->tx_time_stamp_en = DEFAULT_TX_TIME_STAMP_EN;
-+	cfg->rx_flow = DEFAULT_RX_FLOW;
-+	cfg->tx_flow = DEFAULT_TX_FLOW;
-+	cfg->rx_group_hash_exd = DEFAULT_RX_GROUP_HASH_EXD;
-+	cfg->tx_pause_time_extd = DEFAULT_TX_PAUSE_TIME_EXTD;
-+	cfg->rx_promisc = DEFAULT_RX_PROMISC;
-+	cfg->non_back_to_back_ipg1 = DEFAULT_NON_BACK_TO_BACK_IPG1;
-+	cfg->non_back_to_back_ipg2 = DEFAULT_NON_BACK_TO_BACK_IPG2;
-+	cfg->min_ifg_enforcement = DEFAULT_MIN_IFG_ENFORCEMENT;
-+	cfg->back_to_back_ipg = DEFAULT_BACK_TO_BACK_IPG;
-+	cfg->maximum_frame = DEFAULT_MAXIMUM_FRAME;
-+	cfg->tbi_phy_addr = DEFAULT_TBI_PHY_ADDR;
-+	cfg->wake_on_lan = DEFAULT_WAKE_ON_LAN;
-+}
-+
-+int fman_dtsec_init(struct dtsec_regs *regs, struct dtsec_cfg *cfg,
-+		enum enet_interface iface_mode,
-+		enum enet_speed iface_speed,
-+		uint8_t *macaddr,
-+		uint8_t fm_rev_maj,
-+		uint8_t fm_rev_min,
-+		uint32_t exception_mask)
-+{
-+	bool		is_rgmii = FALSE;
-+	bool		is_sgmii = FALSE;
-+	bool		is_qsgmii = FALSE;
-+	int		i;
-+	uint32_t	tmp;
-+
-+UNUSED(fm_rev_maj);UNUSED(fm_rev_min);
-+
-+	/* let's start with a soft reset */
-+	iowrite32be(MACCFG1_SOFT_RESET, &regs->maccfg1);
-+	iowrite32be(0, &regs->maccfg1);
-+
-+	/*************dtsec_id2******************/
-+	tmp =  ioread32be(&regs->tsec_id2);
-+
-+	/* check RGMII support */
-+	if (iface_mode == E_ENET_IF_RGMII ||
-+			iface_mode == E_ENET_IF_RMII)
-+		if (tmp & DTSEC_ID2_INT_REDUCED_OFF)
-+			return -EINVAL;
-+
-+	if (iface_mode == E_ENET_IF_SGMII ||
-+			iface_mode == E_ENET_IF_MII)
-+		if (tmp & DTSEC_ID2_INT_REDUCED_OFF)
-+			return -EINVAL;
-+
-+	/***************ECNTRL************************/
-+
-+	is_rgmii = (bool)((iface_mode == E_ENET_IF_RGMII) ? TRUE : FALSE);
-+	is_sgmii = (bool)((iface_mode == E_ENET_IF_SGMII) ? TRUE : FALSE);
-+	is_qsgmii = (bool)((iface_mode == E_ENET_IF_QSGMII) ? TRUE : FALSE);
-+
-+	tmp = 0;
-+	if (is_rgmii || iface_mode == E_ENET_IF_GMII)
-+		tmp |= DTSEC_ECNTRL_GMIIM;
-+	if (is_sgmii)
-+		tmp |= (DTSEC_ECNTRL_SGMIIM | DTSEC_ECNTRL_TBIM);
-+	if (is_qsgmii)
-+		tmp |= (DTSEC_ECNTRL_SGMIIM | DTSEC_ECNTRL_TBIM |
-+				DTSEC_ECNTRL_QSGMIIM);
-+	if (is_rgmii)
-+		tmp |= DTSEC_ECNTRL_RPM;
-+	if (iface_speed == E_ENET_SPEED_100)
-+		tmp |= DTSEC_ECNTRL_R100M;
-+
-+	iowrite32be(tmp, &regs->ecntrl);
-+	/***************ECNTRL************************/
-+
-+	/***************TCTRL************************/
-+	tmp = 0;
-+	if (cfg->halfdup_on)
-+		tmp |= DTSEC_TCTRL_THDF;
-+	if (cfg->tx_time_stamp_en)
-+		tmp |= DTSEC_TCTRL_TTSE;
-+
-+	iowrite32be(tmp, &regs->tctrl);
-+
-+	/***************TCTRL************************/
-+
-+	/***************PTV************************/
-+	tmp = 0;
-+
-+#ifdef FM_SHORT_PAUSE_TIME_ERRATA_DTSEC1
-+	if ((fm_rev_maj == 1) && (fm_rev_min == 0))
-+		cfg->tx_pause_time += 2;
-+#endif /* FM_SHORT_PAUSE_TIME_ERRATA_DTSEC1 */
-+
-+	if (cfg->tx_pause_time)
-+		tmp |= cfg->tx_pause_time;
-+	if (cfg->tx_pause_time_extd)
-+		tmp |= cfg->tx_pause_time_extd << PTV_PTE_OFST;
-+	iowrite32be(tmp, &regs->ptv);
-+
-+	/***************RCTRL************************/
-+	tmp = 0;
-+	tmp |= ((uint32_t)(cfg->rx_prepend & 0x0000001f)) << 16;
-+	if (cfg->rx_ctrl_acc)
-+		tmp |= RCTRL_CFA;
-+	if (cfg->rx_group_hash_exd)
-+		tmp |= RCTRL_GHTX;
-+	if (cfg->rx_time_stamp_en)
-+		tmp |= RCTRL_RTSE;
-+	if (cfg->rx_drop_bcast)
-+		tmp |= RCTRL_BC_REJ;
-+	if (cfg->rx_short_frm)
-+		tmp |= RCTRL_RSF;
-+	if (cfg->rx_promisc)
-+		tmp |= RCTRL_PROM;
-+
-+	iowrite32be(tmp, &regs->rctrl);
-+	/***************RCTRL************************/
-+
-+	/*
-+	 * Assign a Phy Address to the TBI (TBIPA).
-+	 * Done also in cases where TBI is not selected to avoid conflict with
-+	 * the external PHY's Physical address
-+	 */
-+	iowrite32be(cfg->tbipa, &regs->tbipa);
-+
-+	/***************TMR_CTL************************/
-+	iowrite32be(0, &regs->tmr_ctrl);
-+
-+	if (cfg->ptp_tsu_en) {
-+		tmp = 0;
-+		tmp |= TMR_PEVENT_TSRE;
-+		iowrite32be(tmp, &regs->tmr_pevent);
-+
-+		if (cfg->ptp_exception_en) {
-+			tmp = 0;
-+			tmp |= TMR_PEMASK_TSREEN;
-+			iowrite32be(tmp, &regs->tmr_pemask);
-+		}
-+	}
-+
-+	/***************MACCFG1***********************/
-+	tmp = 0;
-+	if (cfg->loopback)
-+		tmp |= MACCFG1_LOOPBACK;
-+	if (cfg->rx_flow)
-+		tmp |= MACCFG1_RX_FLOW;
-+	if (cfg->tx_flow)
-+		tmp |= MACCFG1_TX_FLOW;
-+	iowrite32be(tmp, &regs->maccfg1);
-+
-+	/***************MACCFG1***********************/
-+
-+	/***************MACCFG2***********************/
-+	tmp = 0;
-+
-+	if (iface_speed < E_ENET_SPEED_1000)
-+		tmp |= MACCFG2_NIBBLE_MODE;
-+	else if (iface_speed == E_ENET_SPEED_1000)
-+		tmp |= MACCFG2_BYTE_MODE;
-+
-+	tmp |= ((uint32_t) cfg->preamble_len & 0x0000000f)
-+		<< PREAMBLE_LENGTH_SHIFT;
-+
-+	if (cfg->rx_preamble)
-+		tmp |= MACCFG2_PRE_AM_Rx_EN;
-+	if (cfg->tx_preamble)
-+		tmp |= MACCFG2_PRE_AM_Tx_EN;
-+	if (cfg->rx_len_check)
-+		tmp |= MACCFG2_LENGTH_CHECK;
-+	if (cfg->tx_pad_crc)
-+		tmp |= MACCFG2_PAD_CRC_EN;
-+	if (cfg->tx_crc)
-+		tmp |= MACCFG2_CRC_EN;
-+	if (!cfg->halfdup_on)
-+		tmp |= MACCFG2_FULL_DUPLEX;
-+	iowrite32be(tmp, &regs->maccfg2);
-+
-+	/***************MACCFG2***********************/
-+
-+	/***************IPGIFG************************/
-+	tmp = (((cfg->non_back_to_back_ipg1 <<
-+		IPGIFG_NON_BACK_TO_BACK_IPG_1_SHIFT)
-+		& IPGIFG_NON_BACK_TO_BACK_IPG_1)
-+		| ((cfg->non_back_to_back_ipg2 <<
-+		IPGIFG_NON_BACK_TO_BACK_IPG_2_SHIFT)
-+		& IPGIFG_NON_BACK_TO_BACK_IPG_2)
-+		| ((cfg->min_ifg_enforcement <<
-+		IPGIFG_MIN_IFG_ENFORCEMENT_SHIFT)
-+		& IPGIFG_MIN_IFG_ENFORCEMENT)
-+		| (cfg->back_to_back_ipg & IPGIFG_BACK_TO_BACK_IPG));
-+	iowrite32be(tmp, &regs->ipgifg);
-+
-+	/***************IPGIFG************************/
-+
-+	/***************HAFDUP************************/
-+	tmp = 0;
-+
-+	if (cfg->halfdup_alt_backoff_en)
-+		tmp = (uint32_t)(HAFDUP_ALT_BEB |
-+				((cfg->halfdup_alt_backoff_val & 0x0000000f)
-+				 << HAFDUP_ALTERNATE_BEB_TRUNCATION_SHIFT));
-+	if (cfg->halfdup_bp_no_backoff)
-+		tmp |= HAFDUP_BP_NO_BACKOFF;
-+	if (cfg->halfdup_no_backoff)
-+		tmp |= HAFDUP_NO_BACKOFF;
-+	if (cfg->halfdup_excess_defer)
-+		tmp |= HAFDUP_EXCESS_DEFER;
-+	tmp |= ((cfg->halfdup_retransmit << HAFDUP_RETRANSMISSION_MAX_SHIFT)
-+		& HAFDUP_RETRANSMISSION_MAX);
-+	tmp |= (cfg->halfdup_coll_window & HAFDUP_COLLISION_WINDOW);
-+
-+	iowrite32be(tmp, &regs->hafdup);
-+	/***************HAFDUP************************/
-+
-+	/***************MAXFRM************************/
-+	/* Initialize MAXFRM */
-+	iowrite32be(cfg->maximum_frame, &regs->maxfrm);
-+
-+	/***************MAXFRM************************/
-+
-+	/***************CAM1************************/
-+	iowrite32be(0xffffffff, &regs->cam1);
-+	iowrite32be(0xffffffff, &regs->cam2);
-+
-+	/***************IMASK************************/
-+	iowrite32be(exception_mask, &regs->imask);
-+	/***************IMASK************************/
-+
-+	/***************IEVENT************************/
-+	iowrite32be(0xffffffff, &regs->ievent);
-+
-+	/***************MACSTNADDR1/2*****************/
-+
-+	tmp = (uint32_t)((macaddr[5] << 24) |
-+			 (macaddr[4] << 16) |
-+			 (macaddr[3] << 8) |
-+			  macaddr[2]);
-+	iowrite32be(tmp, &regs->macstnaddr1);
-+
-+	tmp = (uint32_t)((macaddr[1] << 24) |
-+			 (macaddr[0] << 16));
-+	iowrite32be(tmp, &regs->macstnaddr2);
-+
-+	/***************MACSTNADDR1/2*****************/
-+
-+	/*****************HASH************************/
-+	for (i = 0; i < NUM_OF_HASH_REGS ; i++) {
-+		/* Initialize IADDRx */
-+		iowrite32be(0, &regs->igaddr[i]);
-+		/* Initialize GADDRx */
-+		iowrite32be(0, &regs->gaddr[i]);
-+	}
-+
-+	fman_dtsec_reset_stat(regs);
-+
-+	return 0;
-+}
-+
-+uint16_t fman_dtsec_get_max_frame_len(struct dtsec_regs *regs)
-+{
-+	return (uint16_t)ioread32be(&regs->maxfrm);
-+}
-+
-+void fman_dtsec_set_max_frame_len(struct dtsec_regs *regs, uint16_t length)
-+{
-+	iowrite32be(length, &regs->maxfrm);
-+}
-+
-+void fman_dtsec_set_mac_address(struct dtsec_regs *regs, uint8_t *adr)
-+{
-+	uint32_t tmp;
-+
-+	tmp = (uint32_t)((adr[5] << 24) |
-+			 (adr[4] << 16) |
-+			 (adr[3] << 8) |
-+			  adr[2]);
-+	iowrite32be(tmp, &regs->macstnaddr1);
-+
-+	tmp = (uint32_t)((adr[1] << 24) |
-+			 (adr[0] << 16));
-+	iowrite32be(tmp, &regs->macstnaddr2);
-+}
-+
-+void fman_dtsec_get_mac_address(struct dtsec_regs *regs, uint8_t *macaddr)
-+{
-+	uint32_t tmp1, tmp2;
-+
-+	tmp1 = ioread32be(&regs->macstnaddr1);
-+	tmp2 = ioread32be(&regs->macstnaddr2);
-+
-+	macaddr[0] = (uint8_t)((tmp2 & 0x00ff0000) >> 16);
-+	macaddr[1] = (uint8_t)((tmp2 & 0xff000000) >> 24);
-+	macaddr[2] = (uint8_t)(tmp1 & 0x000000ff);
-+	macaddr[3] = (uint8_t)((tmp1 & 0x0000ff00) >> 8);
-+	macaddr[4] = (uint8_t)((tmp1 & 0x00ff0000) >> 16);
-+	macaddr[5] = (uint8_t)((tmp1 & 0xff000000) >> 24);
-+}
-+
-+void fman_dtsec_set_hash_table(struct dtsec_regs *regs, uint32_t crc, bool mcast, bool ghtx)
-+{
-+    int32_t bucket;
-+    if (ghtx)
-+        bucket = (int32_t)((crc >> 23) & 0x1ff);
-+    else {
-+        bucket = (int32_t)((crc >> 24) & 0xff);
-+        /* if !ghtx and mcast the bit must be set in gaddr instead of igaddr. */
-+        if (mcast)
-+            bucket += 0x100;
-+    }
-+    fman_dtsec_set_bucket(regs, bucket, TRUE);
-+}
-+
-+void fman_dtsec_set_bucket(struct dtsec_regs *regs, int bucket, bool enable)
-+{
-+	int reg_idx = (bucket >> 5) & 0xf;
-+	int bit_idx = bucket & 0x1f;
-+	uint32_t bit_mask = 0x80000000 >> bit_idx;
-+	uint32_t *reg;
-+
-+	if (reg_idx > 7)
-+		reg = &regs->gaddr[reg_idx-8];
-+	else
-+		reg = &regs->igaddr[reg_idx];
-+
-+	if (enable)
-+		iowrite32be(ioread32be(reg) | bit_mask, reg);
-+	else
-+		iowrite32be(ioread32be(reg) & (~bit_mask), reg);
-+}
-+
-+void fman_dtsec_reset_filter_table(struct dtsec_regs *regs, bool mcast, bool ucast)
-+{
-+	int		i;
-+	bool	ghtx;
-+
-+	ghtx = (bool)((ioread32be(&regs->rctrl) & RCTRL_GHTX) ? TRUE : FALSE);
-+
-+	if (ucast || (ghtx && mcast)) {
-+		for (i = 0; i < NUM_OF_HASH_REGS; i++)
-+			iowrite32be(0, &regs->igaddr[i]);
-+	}
-+	if (mcast) {
-+		for (i = 0; i < NUM_OF_HASH_REGS; i++)
-+			iowrite32be(0, &regs->gaddr[i]);
-+	}
-+}
-+
-+int fman_dtsec_set_tbi_phy_addr(struct dtsec_regs *regs,
-+		uint8_t addr)
-+{
-+	if (addr > 0 && addr < 32)
-+		iowrite32be(addr, &regs->tbipa);
-+	else
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+void fman_dtsec_set_wol(struct dtsec_regs *regs, bool en)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&regs->maccfg2);
-+	if (en)
-+		tmp |= MACCFG2_MAGIC_PACKET_EN;
-+	else
-+		tmp &= ~MACCFG2_MAGIC_PACKET_EN;
-+	iowrite32be(tmp, &regs->maccfg2);
-+}
-+
-+int fman_dtsec_adjust_link(struct dtsec_regs *regs,
-+		enum enet_interface iface_mode,
-+		enum enet_speed speed, bool full_dx)
-+{
-+	uint32_t		tmp;
-+
-+	UNUSED(iface_mode);
-+
-+	if ((speed == E_ENET_SPEED_1000) && !full_dx)
-+		return -EINVAL;
-+
-+	tmp = ioread32be(&regs->maccfg2);
-+	if (!full_dx)
-+		tmp &= ~MACCFG2_FULL_DUPLEX;
-+	else
-+		tmp |= MACCFG2_FULL_DUPLEX;
-+
-+	tmp &= ~(MACCFG2_NIBBLE_MODE | MACCFG2_BYTE_MODE);
-+	if (speed < E_ENET_SPEED_1000)
-+		tmp |= MACCFG2_NIBBLE_MODE;
-+	else if (speed == E_ENET_SPEED_1000)
-+		tmp |= MACCFG2_BYTE_MODE;
-+	iowrite32be(tmp, &regs->maccfg2);
-+
-+	tmp = ioread32be(&regs->ecntrl);
-+	if (speed == E_ENET_SPEED_100)
-+		tmp |= DTSEC_ECNTRL_R100M;
-+	else
-+		tmp &= ~DTSEC_ECNTRL_R100M;
-+	iowrite32be(tmp, &regs->ecntrl);
-+
-+	return 0;
-+}
-+
-+void fman_dtsec_set_uc_promisc(struct dtsec_regs *regs, bool enable)
-+{
-+	uint32_t		tmp;
-+
-+	tmp = ioread32be(&regs->rctrl);
-+
-+	if (enable)
-+		tmp |= RCTRL_UPROM;
-+	else
-+		tmp &= ~RCTRL_UPROM;
-+
-+	iowrite32be(tmp, &regs->rctrl);
-+}
-+
-+void fman_dtsec_set_mc_promisc(struct dtsec_regs *regs, bool enable)
-+{
-+	uint32_t		tmp;
-+
-+	tmp = ioread32be(&regs->rctrl);
-+
-+	if (enable)
-+		tmp |= RCTRL_MPROM;
-+	else
-+		tmp &= ~RCTRL_MPROM;
-+
-+	iowrite32be(tmp, &regs->rctrl);
-+}
-+
-+bool fman_dtsec_get_clear_carry_regs(struct dtsec_regs *regs,
-+				uint32_t *car1, uint32_t *car2)
-+{
-+	/* read carry registers */
-+	*car1 = ioread32be(&regs->car1);
-+	*car2 = ioread32be(&regs->car2);
-+	/* clear carry registers */
-+	if (*car1)
-+		iowrite32be(*car1, &regs->car1);
-+	if (*car2)
-+		iowrite32be(*car2, &regs->car2);
-+
-+	return (bool)((*car1 | *car2) ? TRUE : FALSE);
-+}
-+
-+void fman_dtsec_reset_stat(struct dtsec_regs *regs)
-+{
-+	/* clear HW counters */
-+	iowrite32be(ioread32be(&regs->ecntrl) |
-+			DTSEC_ECNTRL_CLRCNT, &regs->ecntrl);
-+}
-+
-+int fman_dtsec_set_stat_level(struct dtsec_regs *regs, enum dtsec_stat_level level)
-+{
-+	switch (level) {
-+	case E_MAC_STAT_NONE:
-+		iowrite32be(0xffffffff, &regs->cam1);
-+		iowrite32be(0xffffffff, &regs->cam2);
-+		iowrite32be(ioread32be(&regs->ecntrl) & ~DTSEC_ECNTRL_STEN,
-+				&regs->ecntrl);
-+		iowrite32be(ioread32be(&regs->imask) & ~DTSEC_IMASK_MSROEN,
-+				&regs->imask);
-+		break;
-+	case E_MAC_STAT_PARTIAL:
-+		iowrite32be(CAM1_ERRORS_ONLY, &regs->cam1);
-+		iowrite32be(CAM2_ERRORS_ONLY, &regs->cam2);
-+		iowrite32be(ioread32be(&regs->ecntrl) | DTSEC_ECNTRL_STEN,
-+				&regs->ecntrl);
-+		iowrite32be(ioread32be(&regs->imask) | DTSEC_IMASK_MSROEN,
-+				&regs->imask);
-+		break;
-+	case E_MAC_STAT_MIB_GRP1:
-+		iowrite32be((uint32_t)~CAM1_MIB_GRP_1, &regs->cam1);
-+		iowrite32be((uint32_t)~CAM2_MIB_GRP_1, &regs->cam2);
-+		iowrite32be(ioread32be(&regs->ecntrl) | DTSEC_ECNTRL_STEN,
-+				&regs->ecntrl);
-+		iowrite32be(ioread32be(&regs->imask) | DTSEC_IMASK_MSROEN,
-+				&regs->imask);
-+		break;
-+	case E_MAC_STAT_FULL:
-+		iowrite32be(0, &regs->cam1);
-+		iowrite32be(0, &regs->cam2);
-+		iowrite32be(ioread32be(&regs->ecntrl) | DTSEC_ECNTRL_STEN,
-+				&regs->ecntrl);
-+		iowrite32be(ioread32be(&regs->imask) | DTSEC_IMASK_MSROEN,
-+				&regs->imask);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+void fman_dtsec_set_ts(struct dtsec_regs *regs, bool en)
-+{
-+	if (en) {
-+		iowrite32be(ioread32be(&regs->rctrl) | RCTRL_RTSE,
-+				&regs->rctrl);
-+		iowrite32be(ioread32be(&regs->tctrl) | DTSEC_TCTRL_TTSE,
-+				&regs->tctrl);
-+	} else {
-+		iowrite32be(ioread32be(&regs->rctrl) & ~RCTRL_RTSE,
-+				&regs->rctrl);
-+		iowrite32be(ioread32be(&regs->tctrl) & ~DTSEC_TCTRL_TTSE,
-+				&regs->tctrl);
-+	}
-+}
-+
-+void fman_dtsec_enable(struct dtsec_regs *regs, bool apply_rx, bool apply_tx)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&regs->maccfg1);
-+
-+	if (apply_rx)
-+		tmp |= MACCFG1_RX_EN ;
-+
-+	if (apply_tx)
-+		tmp |= MACCFG1_TX_EN ;
-+
-+	iowrite32be(tmp, &regs->maccfg1);
-+}
-+
-+void fman_dtsec_clear_addr_in_paddr(struct dtsec_regs *regs, uint8_t paddr_num)
-+{
-+    iowrite32be(0, &regs->macaddr[paddr_num].exact_match1);
-+    iowrite32be(0, &regs->macaddr[paddr_num].exact_match2);
-+}
-+
-+void fman_dtsec_add_addr_in_paddr(struct dtsec_regs *regs,
-+				uint64_t addr,
-+				uint8_t paddr_num)
-+{
-+	uint32_t tmp;
-+
-+	tmp = (uint32_t)(addr);
-+	/* swap */
-+	tmp = (((tmp & 0x000000FF) << 24) |
-+		((tmp & 0x0000FF00) <<  8) |
-+		((tmp & 0x00FF0000) >>  8) |
-+		((tmp & 0xFF000000) >> 24));
-+	iowrite32be(tmp, &regs->macaddr[paddr_num].exact_match1);
-+
-+	tmp = (uint32_t)(addr>>32);
-+	/* swap */
-+	tmp = (((tmp & 0x000000FF) << 24) |
-+		((tmp & 0x0000FF00) <<  8) |
-+		((tmp & 0x00FF0000) >>  8) |
-+		((tmp & 0xFF000000) >> 24));
-+	iowrite32be(tmp, &regs->macaddr[paddr_num].exact_match2);
-+}
-+
-+void fman_dtsec_disable(struct dtsec_regs *regs, bool apply_rx, bool apply_tx)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&regs->maccfg1);
-+
-+	if (apply_rx)
-+		tmp &= ~MACCFG1_RX_EN;
-+
-+	if (apply_tx)
-+		tmp &= ~MACCFG1_TX_EN;
-+
-+	iowrite32be(tmp, &regs->maccfg1);
-+}
-+
-+void fman_dtsec_set_tx_pause_frames(struct dtsec_regs *regs, uint16_t time)
-+{
-+	uint32_t ptv = 0;
-+
-+	/* fixme: don't enable tx pause for half-duplex */
-+
-+	if (time) {
-+		ptv = ioread32be(&regs->ptv);
-+		ptv &= 0xffff0000;
-+		ptv |= time & 0x0000ffff;
-+		iowrite32be(ptv, &regs->ptv);
-+
-+		/* trigger the transmission of a flow-control pause frame */
-+		iowrite32be(ioread32be(&regs->maccfg1) | MACCFG1_TX_FLOW,
-+				&regs->maccfg1);
-+	} else
-+		iowrite32be(ioread32be(&regs->maccfg1) & ~MACCFG1_TX_FLOW,
-+				&regs->maccfg1);
-+}
-+
-+void fman_dtsec_handle_rx_pause(struct dtsec_regs *regs, bool en)
-+{
-+	uint32_t tmp;
-+
-+	/* todo: check if mac is set to full-duplex */
-+
-+	tmp = ioread32be(&regs->maccfg1);
-+	if (en)
-+		tmp |= MACCFG1_RX_FLOW;
-+	else
-+		tmp &= ~MACCFG1_RX_FLOW;
-+	iowrite32be(tmp, &regs->maccfg1);
-+}
-+
-+uint32_t fman_dtsec_get_rctrl(struct dtsec_regs *regs)
-+{
-+	return ioread32be(&regs->rctrl);
-+}
-+
-+uint32_t fman_dtsec_get_revision(struct dtsec_regs *regs)
-+{
-+	return ioread32be(&regs->tsec_id);
-+}
-+
-+uint32_t fman_dtsec_get_event(struct dtsec_regs *regs, uint32_t ev_mask)
-+{
-+	return ioread32be(&regs->ievent) & ev_mask;
-+}
-+
-+void fman_dtsec_ack_event(struct dtsec_regs *regs, uint32_t ev_mask)
-+{
-+	iowrite32be(ev_mask, &regs->ievent);
-+}
-+
-+uint32_t fman_dtsec_get_interrupt_mask(struct dtsec_regs *regs)
-+{
-+	return ioread32be(&regs->imask);
-+}
-+
-+uint32_t fman_dtsec_check_and_clear_tmr_event(struct dtsec_regs *regs)
-+{
-+	uint32_t event;
-+
-+	event = ioread32be(&regs->tmr_pevent);
-+	event &= ioread32be(&regs->tmr_pemask);
-+
-+	if (event)
-+		iowrite32be(event, &regs->tmr_pevent);
-+	return event;
-+}
-+
-+void fman_dtsec_enable_tmr_interrupt(struct dtsec_regs *regs)
-+{
-+	iowrite32be(ioread32be(&regs->tmr_pemask) | TMR_PEMASK_TSREEN,
-+			&regs->tmr_pemask);
-+}
-+
-+void fman_dtsec_disable_tmr_interrupt(struct dtsec_regs *regs)
-+{
-+	iowrite32be(ioread32be(&regs->tmr_pemask) & ~TMR_PEMASK_TSREEN,
-+			&regs->tmr_pemask);
-+}
-+
-+void fman_dtsec_enable_interrupt(struct dtsec_regs *regs, uint32_t ev_mask)
-+{
-+	iowrite32be(ioread32be(&regs->imask) | ev_mask, &regs->imask);
-+}
-+
-+void fman_dtsec_disable_interrupt(struct dtsec_regs *regs, uint32_t ev_mask)
-+{
-+	iowrite32be(ioread32be(&regs->imask) & ~ev_mask, &regs->imask);
-+}
-+
-+uint32_t fman_dtsec_get_stat_counter(struct dtsec_regs *regs,
-+		enum dtsec_stat_counters reg_name)
-+{
-+	uint32_t ret_val;
-+
-+	switch (reg_name) {
-+	case E_DTSEC_STAT_TR64:
-+		ret_val = ioread32be(&regs->tr64);
-+		break;
-+	case E_DTSEC_STAT_TR127:
-+		ret_val = ioread32be(&regs->tr127);
-+		break;
-+	case E_DTSEC_STAT_TR255:
-+		ret_val = ioread32be(&regs->tr255);
-+		break;
-+	case E_DTSEC_STAT_TR511:
-+		ret_val = ioread32be(&regs->tr511);
-+		break;
-+	case E_DTSEC_STAT_TR1K:
-+		ret_val = ioread32be(&regs->tr1k);
-+		break;
-+	case E_DTSEC_STAT_TRMAX:
-+		ret_val = ioread32be(&regs->trmax);
-+		break;
-+	case E_DTSEC_STAT_TRMGV:
-+		ret_val = ioread32be(&regs->trmgv);
-+		break;
-+	case E_DTSEC_STAT_RBYT:
-+		ret_val = ioread32be(&regs->rbyt);
-+		break;
-+	case E_DTSEC_STAT_RPKT:
-+		ret_val = ioread32be(&regs->rpkt);
-+		break;
-+	case E_DTSEC_STAT_RMCA:
-+		ret_val = ioread32be(&regs->rmca);
-+		break;
-+	case E_DTSEC_STAT_RBCA:
-+		ret_val = ioread32be(&regs->rbca);
-+		break;
-+	case E_DTSEC_STAT_RXPF:
-+		ret_val = ioread32be(&regs->rxpf);
-+		break;
-+	case E_DTSEC_STAT_RALN:
-+		ret_val = ioread32be(&regs->raln);
-+		break;
-+	case E_DTSEC_STAT_RFLR:
-+		ret_val = ioread32be(&regs->rflr);
-+		break;
-+	case E_DTSEC_STAT_RCDE:
-+		ret_val = ioread32be(&regs->rcde);
-+		break;
-+	case E_DTSEC_STAT_RCSE:
-+		ret_val = ioread32be(&regs->rcse);
-+		break;
-+	case E_DTSEC_STAT_RUND:
-+		ret_val = ioread32be(&regs->rund);
-+		break;
-+	case E_DTSEC_STAT_ROVR:
-+		ret_val = ioread32be(&regs->rovr);
-+		break;
-+	case E_DTSEC_STAT_RFRG:
-+		ret_val = ioread32be(&regs->rfrg);
-+		break;
-+	case E_DTSEC_STAT_RJBR:
-+		ret_val = ioread32be(&regs->rjbr);
-+		break;
-+	case E_DTSEC_STAT_RDRP:
-+		ret_val = ioread32be(&regs->rdrp);
-+		break;
-+	case E_DTSEC_STAT_TFCS:
-+		ret_val = ioread32be(&regs->tfcs);
-+		break;
-+	case E_DTSEC_STAT_TBYT:
-+		ret_val = ioread32be(&regs->tbyt);
-+		break;
-+	case E_DTSEC_STAT_TPKT:
-+		ret_val = ioread32be(&regs->tpkt);
-+		break;
-+	case E_DTSEC_STAT_TMCA:
-+		ret_val = ioread32be(&regs->tmca);
-+		break;
-+	case E_DTSEC_STAT_TBCA:
-+		ret_val = ioread32be(&regs->tbca);
-+		break;
-+	case E_DTSEC_STAT_TXPF:
-+		ret_val = ioread32be(&regs->txpf);
-+		break;
-+	case E_DTSEC_STAT_TNCL:
-+		ret_val = ioread32be(&regs->tncl);
-+		break;
-+	case E_DTSEC_STAT_TDRP:
-+		ret_val = ioread32be(&regs->tdrp);
-+		break;
-+	default:
-+		ret_val = 0;
-+	}
-+
-+	return ret_val;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_dtsec_mii_acc.c
-@@ -0,0 +1,163 @@
-+/*
-+ * Copyright 2008-2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#include "common/general.h"
-+#include "fsl_fman_dtsec_mii_acc.h"
-+
-+
-+/**
-+ * dtsec_mii_get_div() - calculates the value of the dtsec mii divider
-+ * @dtsec_freq:		dtsec clock frequency (in Mhz)
-+ *
-+ * This function calculates the dtsec mii clock divider that determines
-+ * the MII MDC clock. MII MDC clock will be set to work in the range
-+ * of 1.5 to 2.5Mhz
-+ * The output of this function is the value of MIIMCFG[MgmtClk] which
-+ * implicitly determines the divider value.
-+ * Note: the dTSEC system clock is equal to 1/2 of the FMan clock.
-+ *
-+ * The table below which reflects dtsec_mii_get_div() functionality
-+ * shows the relations among dtsec_freq, MgmtClk, actual divider
-+ * and the MII frequency:
-+ *
-+ * dtsec freq   MgmtClk     div        MII freq Mhz
-+ * [0.....80]     1      (1/4)(1/8)    [0   to 2.5]
-+ * [81...120]     2      (1/6)(1/8)    [1.6 to 2.5]
-+ * [121..160]     3      (1/8)(1/8)    [1.8 to 2.5]
-+ * [161..200]     4      (1/10)(1/8)   [2.0 to 2.5]
-+ * [201..280]     5      (1/14)(1/8)   [1.8 to 2.5]
-+ * [281..400]     6      (1/20)(1/8)   [1.1 to 2.5]
-+ * [401..560]     7      (1/28)(1/8)   [1.8 to 2.5]
-+ * [560..frq]     7      (1/28)(1/8)   [frq/224]
-+ *
-+ * Returns: the MIIMCFG[MgmtClk] appropriate value
-+ */
-+
-+static uint8_t dtsec_mii_get_div(uint16_t dtsec_freq)
-+{
-+	uint16_t mgmt_clk;
-+
-+	if (dtsec_freq < 80) mgmt_clk = 1;
-+	else if (dtsec_freq < 120) mgmt_clk = 2;
-+	else if (dtsec_freq < 160) mgmt_clk = 3;
-+	else if (dtsec_freq < 200) mgmt_clk = 4;
-+	else if (dtsec_freq < 280) mgmt_clk = 5;
-+	else if (dtsec_freq < 400) mgmt_clk = 6;
-+	else mgmt_clk = 7;
-+
-+	return (uint8_t)mgmt_clk;
-+}
-+
-+void fman_dtsec_mii_reset(struct dtsec_mii_reg *regs)
-+{
-+	/* Reset the management interface */
-+	iowrite32be(ioread32be(&regs->miimcfg) | MIIMCFG_RESET_MGMT,
-+			&regs->miimcfg);
-+	iowrite32be(ioread32be(&regs->miimcfg) & ~MIIMCFG_RESET_MGMT,
-+			&regs->miimcfg);
-+}
-+
-+
-+int fman_dtsec_mii_write_reg(struct dtsec_mii_reg *regs, uint8_t addr,
-+		uint8_t reg, uint16_t data, uint16_t dtsec_freq)
-+{
-+	uint32_t	tmp;
-+
-+	/* Setup the MII Mgmt clock speed */
-+	iowrite32be((uint32_t)dtsec_mii_get_div(dtsec_freq), &regs->miimcfg);
-+	wmb();
-+
-+	/* Stop the MII management read cycle */
-+	iowrite32be(0, &regs->miimcom);
-+	/* Dummy read to make sure MIIMCOM is written */
-+	tmp = ioread32be(&regs->miimcom);
-+	wmb();
-+
-+	/* Setting up MII Management Address Register */
-+	tmp = (uint32_t)((addr << MIIMADD_PHY_ADDR_SHIFT) | reg);
-+	iowrite32be(tmp, &regs->miimadd);
-+	wmb();
-+
-+	/* Setting up MII Management Control Register with data */
-+	iowrite32be((uint32_t)data, &regs->miimcon);
-+	/* Dummy read to make sure MIIMCON is written */
-+	tmp = ioread32be(&regs->miimcon);
-+	wmb();
-+
-+	/* Wait until MII management write is complete */
-+	/* todo: a timeout could be useful here */
-+	while ((ioread32be(&regs->miimind)) & MIIMIND_BUSY)
-+		/* busy wait */;
-+
-+	return 0;
-+}
-+
-+int fman_dtsec_mii_read_reg(struct dtsec_mii_reg *regs, uint8_t  addr,
-+		uint8_t reg, uint16_t *data, uint16_t dtsec_freq)
-+{
-+	uint32_t	tmp;
-+
-+	/* Setup the MII Mgmt clock speed */
-+	iowrite32be((uint32_t)dtsec_mii_get_div(dtsec_freq), &regs->miimcfg);
-+	wmb();
-+
-+	/* Setting up the MII Management Address Register */
-+	tmp = (uint32_t)((addr << MIIMADD_PHY_ADDR_SHIFT) | reg);
-+	iowrite32be(tmp, &regs->miimadd);
-+	wmb();
-+
-+	/* Perform an MII management read cycle */
-+	iowrite32be(MIIMCOM_READ_CYCLE, &regs->miimcom);
-+	/* Dummy read to make sure MIIMCOM is written */
-+	tmp = ioread32be(&regs->miimcom);
-+	wmb();
-+
-+	/* Wait until MII management read is complete */
-+	/* todo: a timeout could be useful here */
-+	while ((ioread32be(&regs->miimind)) & MIIMIND_BUSY)
-+		/* busy wait */;
-+
-+	/* Read MII management status  */
-+	*data = (uint16_t)ioread32be(&regs->miimstat);
-+	wmb();
-+
-+	iowrite32be(0, &regs->miimcom);
-+	/* Dummy read to make sure MIIMCOM is written */
-+	tmp = ioread32be(&regs->miimcom);
-+
-+	if (*data == 0xffff)
-+		return -ENXIO;
-+
-+	return 0;
-+}
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_memac.c
-@@ -0,0 +1,511 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#include "fsl_fman_memac.h"
-+
-+
-+uint32_t fman_memac_get_event(struct memac_regs *regs, uint32_t ev_mask)
-+{
-+    return ioread32be(&regs->ievent) & ev_mask;
-+}
-+
-+uint32_t fman_memac_get_interrupt_mask(struct memac_regs *regs)
-+{
-+    return ioread32be(&regs->imask);
-+}
-+
-+void fman_memac_ack_event(struct memac_regs *regs, uint32_t ev_mask)
-+{
-+    iowrite32be(ev_mask, &regs->ievent);
-+}
-+
-+void fman_memac_set_promiscuous(struct memac_regs *regs, bool val)
-+{
-+    uint32_t tmp;
-+
-+    tmp = ioread32be(&regs->command_config);
-+
-+    if (val)
-+        tmp |= CMD_CFG_PROMIS_EN;
-+    else
-+        tmp &= ~CMD_CFG_PROMIS_EN;
-+
-+    iowrite32be(tmp, &regs->command_config);
-+}
-+
-+void fman_memac_clear_addr_in_paddr(struct memac_regs *regs,
-+                    uint8_t paddr_num)
-+{
-+    if (paddr_num == 0) {
-+        iowrite32be(0, &regs->mac_addr0.mac_addr_l);
-+        iowrite32be(0, &regs->mac_addr0.mac_addr_u);
-+    } else {
-+        iowrite32be(0x0, &regs->mac_addr[paddr_num - 1].mac_addr_l);
-+        iowrite32be(0x0, &regs->mac_addr[paddr_num - 1].mac_addr_u);
-+    }
-+}
-+
-+void fman_memac_add_addr_in_paddr(struct memac_regs *regs,
-+                    uint8_t *adr,
-+                    uint8_t paddr_num)
-+{
-+    uint32_t tmp0, tmp1;
-+
-+    tmp0 = (uint32_t)(adr[0] |
-+            adr[1] << 8 |
-+            adr[2] << 16 |
-+            adr[3] << 24);
-+    tmp1 = (uint32_t)(adr[4] | adr[5] << 8);
-+
-+    if (paddr_num == 0) {
-+        iowrite32be(tmp0, &regs->mac_addr0.mac_addr_l);
-+        iowrite32be(tmp1, &regs->mac_addr0.mac_addr_u);
-+    } else {
-+        iowrite32be(tmp0, &regs->mac_addr[paddr_num-1].mac_addr_l);
-+        iowrite32be(tmp1, &regs->mac_addr[paddr_num-1].mac_addr_u);
-+    }
-+}
-+
-+void fman_memac_enable(struct memac_regs *regs, bool apply_rx, bool apply_tx)
-+{
-+    uint32_t tmp;
-+
-+    tmp = ioread32be(&regs->command_config);
-+
-+    if (apply_rx)
-+        tmp |= CMD_CFG_RX_EN;
-+
-+    if (apply_tx)
-+        tmp |= CMD_CFG_TX_EN;
-+
-+    iowrite32be(tmp, &regs->command_config);
-+}
-+
-+void fman_memac_disable(struct memac_regs *regs, bool apply_rx, bool apply_tx)
-+{
-+    uint32_t tmp;
-+
-+    tmp = ioread32be(&regs->command_config);
-+
-+    if (apply_rx)
-+        tmp &= ~CMD_CFG_RX_EN;
-+
-+    if (apply_tx)
-+        tmp &= ~CMD_CFG_TX_EN;
-+
-+    iowrite32be(tmp, &regs->command_config);
-+}
-+
-+void fman_memac_reset_stat(struct memac_regs *regs)
-+{
-+    uint32_t tmp;
-+
-+    tmp = ioread32be(&regs->statn_config);
-+
-+    tmp |= STATS_CFG_CLR;
-+
-+    iowrite32be(tmp, &regs->statn_config);
-+
-+    while (ioread32be(&regs->statn_config) & STATS_CFG_CLR);
-+}
-+
-+void fman_memac_reset(struct memac_regs *regs)
-+{
-+    uint32_t tmp;
-+
-+    tmp = ioread32be(&regs->command_config);
-+
-+    tmp |= CMD_CFG_SW_RESET;
-+
-+    iowrite32be(tmp, &regs->command_config);
-+
-+    while (ioread32be(&regs->command_config) & CMD_CFG_SW_RESET);
-+}
-+
-+int fman_memac_init(struct memac_regs *regs,
-+        struct memac_cfg *cfg,
-+        enum enet_interface enet_interface,
-+        enum enet_speed enet_speed,
-+	bool slow_10g_if,
-+        uint32_t exceptions)
-+{
-+    uint32_t    tmp;
-+
-+    /* Config */
-+    tmp = 0;
-+    if (cfg->wan_mode_enable)
-+        tmp |= CMD_CFG_WAN_MODE;
-+    if (cfg->promiscuous_mode_enable)
-+        tmp |= CMD_CFG_PROMIS_EN;
-+    if (cfg->pause_forward_enable)
-+        tmp |= CMD_CFG_PAUSE_FWD;
-+    if (cfg->pause_ignore)
-+        tmp |= CMD_CFG_PAUSE_IGNORE;
-+    if (cfg->tx_addr_ins_enable)
-+        tmp |= CMD_CFG_TX_ADDR_INS;
-+    if (cfg->loopback_enable)
-+        tmp |= CMD_CFG_LOOPBACK_EN;
-+    if (cfg->cmd_frame_enable)
-+        tmp |= CMD_CFG_CNT_FRM_EN;
-+    if (cfg->send_idle_enable)
-+        tmp |= CMD_CFG_SEND_IDLE;
-+    if (cfg->no_length_check_enable)
-+        tmp |= CMD_CFG_NO_LEN_CHK;
-+    if (cfg->rx_sfd_any)
-+        tmp |= CMD_CFG_SFD_ANY;
-+    if (cfg->pad_enable)
-+        tmp |= CMD_CFG_TX_PAD_EN;
-+    if (cfg->wake_on_lan)
-+        tmp |= CMD_CFG_MG;
-+
-+    tmp |= CMD_CFG_CRC_FWD;
-+
-+    iowrite32be(tmp, &regs->command_config);
-+
-+    /* Max Frame Length */
-+    iowrite32be((uint32_t)cfg->max_frame_length, &regs->maxfrm);
-+
-+    /* Pause Time */
-+    iowrite32be((uint32_t)cfg->pause_quanta, &regs->pause_quanta[0]);
-+    iowrite32be((uint32_t)0, &regs->pause_thresh[0]);
-+
-+    /* IF_MODE */
-+    tmp = 0;
-+    switch (enet_interface) {
-+    case E_ENET_IF_XGMII:
-+    case E_ENET_IF_XFI:
-+        tmp |= IF_MODE_XGMII;
-+        break;
-+    default:
-+        tmp |= IF_MODE_GMII;
-+        if (enet_interface == E_ENET_IF_RGMII && !cfg->loopback_enable)
-+            tmp |= IF_MODE_RGMII | IF_MODE_RGMII_AUTO;
-+    }
-+    iowrite32be(tmp, &regs->if_mode);
-+
-+	/* TX_FIFO_SECTIONS */
-+	tmp = 0;
-+	if (enet_interface == E_ENET_IF_XGMII ||
-+		enet_interface == E_ENET_IF_XFI) {
-+		if(slow_10g_if) {
-+			tmp |= (TX_FIFO_SECTIONS_TX_AVAIL_SLOW_10G |
-+				TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_10G);
-+		} else {
-+			tmp |= (TX_FIFO_SECTIONS_TX_AVAIL_10G |
-+				TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_10G);
-+		}
-+	} else {
-+		tmp |= (TX_FIFO_SECTIONS_TX_AVAIL_1G |
-+				TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_1G);
-+	}
-+	iowrite32be(tmp, &regs->tx_fifo_sections);
-+
-+    /* clear all pending events and set-up interrupts */
-+    fman_memac_ack_event(regs, 0xffffffff);
-+    fman_memac_set_exception(regs, exceptions, TRUE);
-+
-+    return 0;
-+}
-+
-+void fman_memac_set_exception(struct memac_regs *regs, uint32_t val, bool enable)
-+{
-+    uint32_t tmp;
-+
-+    tmp = ioread32be(&regs->imask);
-+    if (enable)
-+        tmp |= val;
-+    else
-+        tmp &= ~val;
-+
-+    iowrite32be(tmp, &regs->imask);
-+}
-+
-+void fman_memac_reset_filter_table(struct memac_regs *regs)
-+{
-+	uint32_t i;
-+	for (i = 0; i < 64; i++)
-+		iowrite32be(i & ~HASH_CTRL_MCAST_EN, &regs->hashtable_ctrl);
-+}
-+
-+void fman_memac_set_hash_table_entry(struct memac_regs *regs, uint32_t crc)
-+{
-+	iowrite32be(crc | HASH_CTRL_MCAST_EN, &regs->hashtable_ctrl);
-+}
-+
-+void fman_memac_set_hash_table(struct memac_regs *regs, uint32_t val)
-+{
-+    iowrite32be(val, &regs->hashtable_ctrl);
-+}
-+
-+uint16_t fman_memac_get_max_frame_len(struct memac_regs *regs)
-+{
-+    uint32_t tmp;
-+
-+    tmp = ioread32be(&regs->maxfrm);
-+
-+    return(uint16_t)tmp;
-+}
-+
-+
-+void fman_memac_set_tx_pause_frames(struct memac_regs *regs,
-+                uint8_t priority,
-+                uint16_t pause_time,
-+                uint16_t thresh_time)
-+{
-+    uint32_t tmp;
-+
-+	tmp = ioread32be(&regs->tx_fifo_sections);
-+
-+	if (priority == 0xff) {
-+		GET_TX_EMPTY_DEFAULT_VALUE(tmp);
-+		iowrite32be(tmp, &regs->tx_fifo_sections);
-+
-+		tmp = ioread32be(&regs->command_config);
-+		tmp &= ~CMD_CFG_PFC_MODE;
-+		priority = 0;
-+	} else {
-+		GET_TX_EMPTY_PFC_VALUE(tmp);
-+		iowrite32be(tmp, &regs->tx_fifo_sections);
-+
-+		tmp = ioread32be(&regs->command_config);
-+		tmp |= CMD_CFG_PFC_MODE;
-+    }
-+
-+    iowrite32be(tmp, &regs->command_config);
-+
-+    tmp = ioread32be(&regs->pause_quanta[priority / 2]);
-+    if (priority % 2)
-+        tmp &= 0x0000FFFF;
-+    else
-+        tmp &= 0xFFFF0000;
-+    tmp |= ((uint32_t)pause_time << (16 * (priority % 2)));
-+    iowrite32be(tmp, &regs->pause_quanta[priority / 2]);
-+
-+    tmp = ioread32be(&regs->pause_thresh[priority / 2]);
-+    if (priority % 2)
-+            tmp &= 0x0000FFFF;
-+    else
-+            tmp &= 0xFFFF0000;
-+    tmp |= ((uint32_t)thresh_time<<(16 * (priority % 2)));
-+    iowrite32be(tmp, &regs->pause_thresh[priority / 2]);
-+}
-+
-+void fman_memac_set_rx_ignore_pause_frames(struct memac_regs    *regs,bool enable)
-+{
-+    uint32_t tmp;
-+
-+    tmp = ioread32be(&regs->command_config);
-+    if (enable)
-+        tmp |= CMD_CFG_PAUSE_IGNORE;
-+    else
-+        tmp &= ~CMD_CFG_PAUSE_IGNORE;
-+
-+    iowrite32be(tmp, &regs->command_config);
-+}
-+
-+void fman_memac_set_wol(struct memac_regs *regs, bool enable)
-+{
-+    uint32_t tmp;
-+
-+    tmp = ioread32be(&regs->command_config);
-+
-+    if (enable)
-+        tmp |= CMD_CFG_MG;
-+    else
-+        tmp &= ~CMD_CFG_MG;
-+
-+    iowrite32be(tmp, &regs->command_config);
-+}
-+
-+#define GET_MEMAC_CNTR_64(bn) \
-+        (ioread32be(&regs->bn ## _l) | \
-+        ((uint64_t)ioread32be(&regs->bn ## _u) << 32))
-+
-+uint64_t fman_memac_get_counter(struct memac_regs *regs,
-+                enum memac_counters reg_name)
-+{
-+    uint64_t ret_val;
-+
-+    switch (reg_name) {
-+    case E_MEMAC_COUNTER_R64:
-+        ret_val = GET_MEMAC_CNTR_64(r64);
-+        break;
-+    case E_MEMAC_COUNTER_R127:
-+        ret_val = GET_MEMAC_CNTR_64(r127);
-+        break;
-+    case E_MEMAC_COUNTER_R255:
-+        ret_val = GET_MEMAC_CNTR_64(r255);
-+        break;
-+    case E_MEMAC_COUNTER_R511:
-+        ret_val = GET_MEMAC_CNTR_64(r511);
-+        break;
-+    case E_MEMAC_COUNTER_R1023:
-+        ret_val = GET_MEMAC_CNTR_64(r1023);
-+        break;
-+    case E_MEMAC_COUNTER_R1518:
-+        ret_val = GET_MEMAC_CNTR_64(r1518);
-+        break;
-+    case E_MEMAC_COUNTER_R1519X:
-+        ret_val = GET_MEMAC_CNTR_64(r1519x);
-+        break;
-+    case E_MEMAC_COUNTER_RFRG:
-+        ret_val = GET_MEMAC_CNTR_64(rfrg);
-+        break;
-+    case E_MEMAC_COUNTER_RJBR:
-+        ret_val = GET_MEMAC_CNTR_64(rjbr);
-+        break;
-+    case E_MEMAC_COUNTER_RDRP:
-+        ret_val = GET_MEMAC_CNTR_64(rdrp);
-+        break;
-+    case E_MEMAC_COUNTER_RALN:
-+        ret_val = GET_MEMAC_CNTR_64(raln);
-+        break;
-+    case E_MEMAC_COUNTER_TUND:
-+        ret_val = GET_MEMAC_CNTR_64(tund);
-+        break;
-+    case E_MEMAC_COUNTER_ROVR:
-+        ret_val = GET_MEMAC_CNTR_64(rovr);
-+        break;
-+    case E_MEMAC_COUNTER_RXPF:
-+        ret_val = GET_MEMAC_CNTR_64(rxpf);
-+        break;
-+    case E_MEMAC_COUNTER_TXPF:
-+        ret_val = GET_MEMAC_CNTR_64(txpf);
-+        break;
-+    case E_MEMAC_COUNTER_ROCT:
-+        ret_val = GET_MEMAC_CNTR_64(roct);
-+        break;
-+    case E_MEMAC_COUNTER_RMCA:
-+        ret_val = GET_MEMAC_CNTR_64(rmca);
-+        break;
-+    case E_MEMAC_COUNTER_RBCA:
-+        ret_val = GET_MEMAC_CNTR_64(rbca);
-+        break;
-+    case E_MEMAC_COUNTER_RPKT:
-+        ret_val = GET_MEMAC_CNTR_64(rpkt);
-+        break;
-+    case E_MEMAC_COUNTER_RUCA:
-+        ret_val = GET_MEMAC_CNTR_64(ruca);
-+        break;
-+    case E_MEMAC_COUNTER_RERR:
-+        ret_val = GET_MEMAC_CNTR_64(rerr);
-+        break;
-+    case E_MEMAC_COUNTER_TOCT:
-+        ret_val = GET_MEMAC_CNTR_64(toct);
-+        break;
-+    case E_MEMAC_COUNTER_TMCA:
-+        ret_val = GET_MEMAC_CNTR_64(tmca);
-+        break;
-+    case E_MEMAC_COUNTER_TBCA:
-+        ret_val = GET_MEMAC_CNTR_64(tbca);
-+        break;
-+    case E_MEMAC_COUNTER_TUCA:
-+        ret_val = GET_MEMAC_CNTR_64(tuca);
-+        break;
-+    case E_MEMAC_COUNTER_TERR:
-+        ret_val = GET_MEMAC_CNTR_64(terr);
-+        break;
-+    default:
-+        ret_val = 0;
-+    }
-+
-+    return ret_val;
-+}
-+
-+void fman_memac_adjust_link(struct memac_regs *regs,
-+        enum enet_interface iface_mode,
-+        enum enet_speed speed, bool full_dx)
-+{
-+    uint32_t    tmp;
-+
-+    tmp = ioread32be(&regs->if_mode);
-+
-+    if (full_dx)
-+        tmp &= ~IF_MODE_HD;
-+    else
-+        tmp |= IF_MODE_HD;
-+
-+    if (iface_mode == E_ENET_IF_RGMII) {
-+        /* Configure RGMII in manual mode */
-+        tmp &= ~IF_MODE_RGMII_AUTO;
-+        tmp &= ~IF_MODE_RGMII_SP_MASK;
-+
-+        if (full_dx)
-+            tmp |= IF_MODE_RGMII_FD;
-+        else
-+            tmp &= ~IF_MODE_RGMII_FD;
-+
-+        switch (speed) {
-+        case E_ENET_SPEED_1000:
-+            tmp |= IF_MODE_RGMII_1000;
-+            break;
-+        case E_ENET_SPEED_100:
-+            tmp |= IF_MODE_RGMII_100;
-+            break;
-+        case E_ENET_SPEED_10:
-+            tmp |= IF_MODE_RGMII_10;
-+            break;
-+        default:
-+            break;
-+        }
-+    }
-+
-+    iowrite32be(tmp, &regs->if_mode);
-+}
-+
-+void fman_memac_defconfig(struct memac_cfg *cfg)
-+{
-+    cfg->reset_on_init		= FALSE;
-+    cfg->wan_mode_enable		= FALSE;
-+    cfg->promiscuous_mode_enable	= FALSE;
-+    cfg->pause_forward_enable	= FALSE;
-+    cfg->pause_ignore		= FALSE;
-+    cfg->tx_addr_ins_enable		= FALSE;
-+    cfg->loopback_enable		= FALSE;
-+    cfg->cmd_frame_enable		= FALSE;
-+    cfg->rx_error_discard		= FALSE;
-+    cfg->send_idle_enable		= FALSE;
-+    cfg->no_length_check_enable	= TRUE;
-+    cfg->lgth_check_nostdr		= FALSE;
-+    cfg->time_stamp_enable		= FALSE;
-+    cfg->tx_ipg_length		= DEFAULT_TX_IPG_LENGTH;
-+    cfg->max_frame_length		= DEFAULT_FRAME_LENGTH;
-+    cfg->pause_quanta		= DEFAULT_PAUSE_QUANTA;
-+    cfg->pad_enable			= TRUE;
-+    cfg->phy_tx_ena_on		= FALSE;
-+    cfg->rx_sfd_any			= FALSE;
-+    cfg->rx_pbl_fwd			= FALSE;
-+    cfg->tx_pbl_fwd			= FALSE;
-+    cfg->debug_mode			= FALSE;
-+    cfg->wake_on_lan        = FALSE;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_memac_mii_acc.c
-@@ -0,0 +1,213 @@
-+/*
-+ * Copyright 2008-2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#include "fsl_fman_memac_mii_acc.h"
-+
-+static void write_phy_reg_10g(struct memac_mii_access_mem_map *mii_regs,
-+	uint8_t phy_addr, uint8_t reg, uint16_t data)
-+{
-+	uint32_t                tmp_reg;
-+
-+	tmp_reg = ioread32be(&mii_regs->mdio_cfg);
-+	/* Leave only MDIO_CLK_DIV bits set on */
-+	tmp_reg &= MDIO_CFG_CLK_DIV_MASK;
-+	/* Set maximum MDIO_HOLD value to allow phy to see
-+	change of data signal */
-+	tmp_reg |= MDIO_CFG_HOLD_MASK;
-+	/* Add 10G interface mode */
-+	tmp_reg |= MDIO_CFG_ENC45;
-+	iowrite32be(tmp_reg, &mii_regs->mdio_cfg);
-+
-+	/* Wait for command completion */
-+	while ((ioread32be(&mii_regs->mdio_cfg)) & MDIO_CFG_BSY)
-+		udelay(1);
-+
-+	/* Specify phy and register to be accessed */
-+	iowrite32be(phy_addr, &mii_regs->mdio_ctrl);
-+	iowrite32be(reg, &mii_regs->mdio_addr);
-+	wmb();
-+
-+	while ((ioread32be(&mii_regs->mdio_cfg)) & MDIO_CFG_BSY)
-+		udelay(1);
-+
-+	/* Write data */
-+	iowrite32be(data, &mii_regs->mdio_data);
-+	wmb();
-+
-+	/* Wait for write transaction end */
-+	while ((ioread32be(&mii_regs->mdio_data)) & MDIO_DATA_BSY)
-+		udelay(1);
-+}
-+
-+static uint32_t read_phy_reg_10g(struct memac_mii_access_mem_map *mii_regs,
-+	uint8_t phy_addr, uint8_t reg, uint16_t *data)
-+{
-+	uint32_t                tmp_reg;
-+
-+	tmp_reg = ioread32be(&mii_regs->mdio_cfg);
-+	/* Leave only MDIO_CLK_DIV bits set on */
-+	tmp_reg &= MDIO_CFG_CLK_DIV_MASK;
-+	/* Set maximum MDIO_HOLD value to allow phy to see
-+	change of data signal */
-+	tmp_reg |= MDIO_CFG_HOLD_MASK;
-+	/* Add 10G interface mode */
-+	tmp_reg |= MDIO_CFG_ENC45;
-+	iowrite32be(tmp_reg, &mii_regs->mdio_cfg);
-+
-+	/* Wait for command completion */
-+	while ((ioread32be(&mii_regs->mdio_cfg)) & MDIO_CFG_BSY)
-+		udelay(1);
-+
-+	/* Specify phy and register to be accessed */
-+	iowrite32be(phy_addr, &mii_regs->mdio_ctrl);
-+	iowrite32be(reg, &mii_regs->mdio_addr);
-+	wmb();
-+
-+	while ((ioread32be(&mii_regs->mdio_cfg)) & MDIO_CFG_BSY)
-+		udelay(1);
-+
-+	/* Read cycle */
-+	tmp_reg = phy_addr;
-+	tmp_reg |= MDIO_CTL_READ;
-+	iowrite32be(tmp_reg, &mii_regs->mdio_ctrl);
-+	wmb();
-+
-+	/* Wait for data to be available */
-+	while ((ioread32be(&mii_regs->mdio_data)) & MDIO_DATA_BSY)
-+		udelay(1);
-+
-+	*data =  (uint16_t)ioread32be(&mii_regs->mdio_data);
-+
-+	/* Check if there was an error */
-+	return ioread32be(&mii_regs->mdio_cfg);
-+}
-+
-+static void write_phy_reg_1g(struct memac_mii_access_mem_map *mii_regs,
-+	uint8_t phy_addr, uint8_t reg, uint16_t data)
-+{
-+	uint32_t                tmp_reg;
-+
-+	/* Leave only MDIO_CLK_DIV and MDIO_HOLD bits set on */
-+	tmp_reg = ioread32be(&mii_regs->mdio_cfg);
-+	tmp_reg &= (MDIO_CFG_CLK_DIV_MASK | MDIO_CFG_HOLD_MASK);
-+	iowrite32be(tmp_reg, &mii_regs->mdio_cfg);
-+
-+	/* Wait for command completion */
-+	while ((ioread32be(&mii_regs->mdio_cfg)) & MDIO_CFG_BSY)
-+		udelay(1);
-+
-+	/* Write transaction */
-+	tmp_reg = (phy_addr << MDIO_CTL_PHY_ADDR_SHIFT);
-+	tmp_reg |= reg;
-+	iowrite32be(tmp_reg, &mii_regs->mdio_ctrl);
-+
-+	while ((ioread32be(&mii_regs->mdio_cfg)) & MDIO_CFG_BSY)
-+		udelay(1);
-+
-+	iowrite32be(data, &mii_regs->mdio_data);
-+
-+	wmb();
-+
-+	/* Wait for write transaction to end */
-+	while ((ioread32be(&mii_regs->mdio_data)) & MDIO_DATA_BSY)
-+		udelay(1);
-+}
-+
-+static uint32_t read_phy_reg_1g(struct memac_mii_access_mem_map *mii_regs,
-+	uint8_t phy_addr, uint8_t reg, uint16_t *data)
-+{
-+	uint32_t tmp_reg;
-+
-+	/* Leave only MDIO_CLK_DIV and MDIO_HOLD bits set on */
-+	tmp_reg = ioread32be(&mii_regs->mdio_cfg);
-+	tmp_reg &= (MDIO_CFG_CLK_DIV_MASK | MDIO_CFG_HOLD_MASK);
-+	iowrite32be(tmp_reg, &mii_regs->mdio_cfg);
-+
-+	/* Wait for command completion */
-+	while ((ioread32be(&mii_regs->mdio_cfg)) & MDIO_CFG_BSY)
-+		udelay(1);
-+
-+	/* Read transaction */
-+	tmp_reg = (phy_addr << MDIO_CTL_PHY_ADDR_SHIFT);
-+	tmp_reg |= reg;
-+	tmp_reg |= MDIO_CTL_READ;
-+	iowrite32be(tmp_reg, &mii_regs->mdio_ctrl);
-+
-+	while ((ioread32be(&mii_regs->mdio_cfg)) & MDIO_CFG_BSY)
-+		udelay(1);
-+
-+	/* Wait for data to be available */
-+	while ((ioread32be(&mii_regs->mdio_data)) & MDIO_DATA_BSY)
-+		udelay(1);
-+
-+	*data =  (uint16_t)ioread32be(&mii_regs->mdio_data);
-+
-+	/* Check error */
-+	return ioread32be(&mii_regs->mdio_cfg);
-+}
-+
-+/*****************************************************************************/
-+int fman_memac_mii_write_phy_reg(struct memac_mii_access_mem_map *mii_regs,
-+	uint8_t phy_addr, uint8_t reg, uint16_t data,
-+	enum enet_speed enet_speed)
-+{
-+	/* Figure out interface type - 10G vs 1G.
-+	In 10G interface both phy_addr and devAddr present. */
-+	if (enet_speed == E_ENET_SPEED_10000)
-+		write_phy_reg_10g(mii_regs, phy_addr, reg, data);
-+	else
-+		write_phy_reg_1g(mii_regs, phy_addr, reg, data);
-+
-+	return 0;
-+}
-+
-+/*****************************************************************************/
-+int fman_memac_mii_read_phy_reg(struct memac_mii_access_mem_map *mii_regs,
-+	uint8_t phy_addr, uint8_t reg, uint16_t *data,
-+	enum enet_speed enet_speed)
-+{
-+	uint32_t ans;
-+	/* Figure out interface type - 10G vs 1G.
-+	In 10G interface both phy_addr and devAddr present. */
-+	if (enet_speed == E_ENET_SPEED_10000)
-+		ans = read_phy_reg_10g(mii_regs, phy_addr, reg, data);
-+	else
-+		ans = read_phy_reg_1g(mii_regs, phy_addr, reg, data);
-+
-+	if (ans & MDIO_CFG_READ_ERR)
-+		return -EINVAL;
-+	return 0;
-+}
-+
-+/* ......................................................................... */
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_tgec.c
-@@ -0,0 +1,367 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#include "fsl_fman_tgec.h"
-+
-+
-+void fman_tgec_set_mac_address(struct tgec_regs *regs, uint8_t *adr)
-+{
-+	uint32_t tmp0, tmp1;
-+
-+	tmp0 = (uint32_t)(adr[0] |
-+			adr[1] << 8 |
-+			adr[2] << 16 |
-+			adr[3] << 24);
-+	tmp1 = (uint32_t)(adr[4] | adr[5] << 8);
-+	iowrite32be(tmp0, &regs->mac_addr_0);
-+	iowrite32be(tmp1, &regs->mac_addr_1);
-+}
-+
-+void fman_tgec_reset_stat(struct tgec_regs *regs)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&regs->command_config);
-+
-+	tmp |= CMD_CFG_STAT_CLR;
-+
-+	iowrite32be(tmp, &regs->command_config);
-+
-+	while (ioread32be(&regs->command_config) & CMD_CFG_STAT_CLR) ;
-+}
-+
-+#define GET_TGEC_CNTR_64(bn) \
-+	(((uint64_t)ioread32be(&regs->bn ## _u) << 32) | \
-+			ioread32be(&regs->bn ## _l))
-+
-+uint64_t fman_tgec_get_counter(struct tgec_regs *regs, enum tgec_counters reg_name)
-+{
-+	uint64_t ret_val;
-+
-+	switch (reg_name) {
-+	case E_TGEC_COUNTER_R64:
-+		ret_val = GET_TGEC_CNTR_64(r64);
-+		break;
-+	case E_TGEC_COUNTER_R127:
-+		ret_val = GET_TGEC_CNTR_64(r127);
-+		break;
-+	case E_TGEC_COUNTER_R255:
-+		ret_val = GET_TGEC_CNTR_64(r255);
-+		break;
-+	case E_TGEC_COUNTER_R511:
-+		ret_val = GET_TGEC_CNTR_64(r511);
-+		break;
-+	case E_TGEC_COUNTER_R1023:
-+		ret_val = GET_TGEC_CNTR_64(r1023);
-+		break;
-+	case E_TGEC_COUNTER_R1518:
-+		ret_val = GET_TGEC_CNTR_64(r1518);
-+		break;
-+	case E_TGEC_COUNTER_R1519X:
-+		ret_val = GET_TGEC_CNTR_64(r1519x);
-+		break;
-+	case E_TGEC_COUNTER_TRFRG:
-+		ret_val = GET_TGEC_CNTR_64(trfrg);
-+		break;
-+	case E_TGEC_COUNTER_TRJBR:
-+		ret_val = GET_TGEC_CNTR_64(trjbr);
-+		break;
-+	case E_TGEC_COUNTER_RDRP:
-+		ret_val = GET_TGEC_CNTR_64(rdrp);
-+		break;
-+	case E_TGEC_COUNTER_RALN:
-+		ret_val = GET_TGEC_CNTR_64(raln);
-+		break;
-+	case E_TGEC_COUNTER_TRUND:
-+		ret_val = GET_TGEC_CNTR_64(trund);
-+		break;
-+	case E_TGEC_COUNTER_TROVR:
-+		ret_val = GET_TGEC_CNTR_64(trovr);
-+		break;
-+	case E_TGEC_COUNTER_RXPF:
-+		ret_val = GET_TGEC_CNTR_64(rxpf);
-+		break;
-+	case E_TGEC_COUNTER_TXPF:
-+		ret_val = GET_TGEC_CNTR_64(txpf);
-+		break;
-+	case E_TGEC_COUNTER_ROCT:
-+		ret_val = GET_TGEC_CNTR_64(roct);
-+		break;
-+	case E_TGEC_COUNTER_RMCA:
-+		ret_val = GET_TGEC_CNTR_64(rmca);
-+		break;
-+	case E_TGEC_COUNTER_RBCA:
-+		ret_val = GET_TGEC_CNTR_64(rbca);
-+		break;
-+	case E_TGEC_COUNTER_RPKT:
-+		ret_val = GET_TGEC_CNTR_64(rpkt);
-+		break;
-+	case E_TGEC_COUNTER_RUCA:
-+		ret_val = GET_TGEC_CNTR_64(ruca);
-+		break;
-+	case E_TGEC_COUNTER_RERR:
-+		ret_val = GET_TGEC_CNTR_64(rerr);
-+		break;
-+	case E_TGEC_COUNTER_TOCT:
-+		ret_val = GET_TGEC_CNTR_64(toct);
-+		break;
-+	case E_TGEC_COUNTER_TMCA:
-+		ret_val = GET_TGEC_CNTR_64(tmca);
-+		break;
-+	case E_TGEC_COUNTER_TBCA:
-+		ret_val = GET_TGEC_CNTR_64(tbca);
-+		break;
-+	case E_TGEC_COUNTER_TUCA:
-+		ret_val = GET_TGEC_CNTR_64(tuca);
-+		break;
-+	case E_TGEC_COUNTER_TERR:
-+		ret_val = GET_TGEC_CNTR_64(terr);
-+		break;
-+	default:
-+		ret_val = 0;
-+	}
-+
-+	return ret_val;
-+}
-+
-+void fman_tgec_enable(struct tgec_regs *regs, bool apply_rx, bool apply_tx)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&regs->command_config);
-+	if (apply_rx)
-+		tmp |= CMD_CFG_RX_EN;
-+	if (apply_tx)
-+		tmp |= CMD_CFG_TX_EN;
-+	iowrite32be(tmp, &regs->command_config);
-+}
-+
-+void fman_tgec_disable(struct tgec_regs *regs, bool apply_rx, bool apply_tx)
-+{
-+	uint32_t tmp_reg_32;
-+
-+	tmp_reg_32 = ioread32be(&regs->command_config);
-+	if (apply_rx)
-+		tmp_reg_32 &= ~CMD_CFG_RX_EN;
-+	if (apply_tx)
-+		tmp_reg_32 &= ~CMD_CFG_TX_EN;
-+	iowrite32be(tmp_reg_32, &regs->command_config);
-+}
-+
-+void fman_tgec_set_promiscuous(struct tgec_regs *regs, bool val)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&regs->command_config);
-+	if (val)
-+		tmp |= CMD_CFG_PROMIS_EN;
-+	else
-+		tmp &= ~CMD_CFG_PROMIS_EN;
-+	iowrite32be(tmp, &regs->command_config);
-+}
-+
-+void fman_tgec_reset_filter_table(struct tgec_regs *regs)
-+{
-+	uint32_t i;
-+	for (i = 0; i < 512; i++)
-+		iowrite32be(i & ~TGEC_HASH_MCAST_EN, &regs->hashtable_ctrl);
-+}
-+
-+void fman_tgec_set_hash_table_entry(struct tgec_regs *regs, uint32_t crc)
-+{
-+    uint32_t hash = (crc >> TGEC_HASH_MCAST_SHIFT) & TGEC_HASH_ADR_MSK;        /* Take 9 MSB bits */
-+	iowrite32be(hash | TGEC_HASH_MCAST_EN, &regs->hashtable_ctrl);
-+}
-+
-+void fman_tgec_set_hash_table(struct tgec_regs *regs, uint32_t value)
-+{
-+	iowrite32be(value, &regs->hashtable_ctrl);
-+}
-+
-+void fman_tgec_set_tx_pause_frames(struct tgec_regs *regs, uint16_t pause_time)
-+{
-+	iowrite32be((uint32_t)pause_time, &regs->pause_quant);
-+}
-+
-+void fman_tgec_set_rx_ignore_pause_frames(struct tgec_regs *regs, bool en)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&regs->command_config);
-+	if (en)
-+		tmp |= CMD_CFG_PAUSE_IGNORE;
-+	else
-+		tmp &= ~CMD_CFG_PAUSE_IGNORE;
-+	iowrite32be(tmp, &regs->command_config);
-+}
-+
-+void fman_tgec_enable_1588_time_stamp(struct tgec_regs *regs, bool en)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&regs->command_config);
-+	if (en)
-+		tmp |= CMD_CFG_EN_TIMESTAMP;
-+	else
-+		tmp &= ~CMD_CFG_EN_TIMESTAMP;
-+	iowrite32be(tmp, &regs->command_config);
-+}
-+
-+uint32_t fman_tgec_get_event(struct tgec_regs *regs, uint32_t ev_mask)
-+{
-+	return ioread32be(&regs->ievent) & ev_mask;
-+}
-+
-+void fman_tgec_ack_event(struct tgec_regs *regs, uint32_t ev_mask)
-+{
-+	iowrite32be(ev_mask, &regs->ievent);
-+}
-+
-+uint32_t fman_tgec_get_interrupt_mask(struct tgec_regs *regs)
-+{
-+	return ioread32be(&regs->imask);
-+}
-+
-+void fman_tgec_add_addr_in_paddr(struct tgec_regs *regs, uint8_t *adr)
-+{
-+	uint32_t tmp0, tmp1;
-+
-+	tmp0 = (uint32_t)(adr[0] |
-+			adr[1] << 8 |
-+			adr[2] << 16 |
-+			adr[3] << 24);
-+	tmp1 = (uint32_t)(adr[4] | adr[5] << 8);
-+	iowrite32be(tmp0, &regs->mac_addr_2);
-+	iowrite32be(tmp1, &regs->mac_addr_3);
-+}
-+
-+void fman_tgec_clear_addr_in_paddr(struct tgec_regs *regs)
-+{
-+	iowrite32be(0, &regs->mac_addr_2);
-+	iowrite32be(0, &regs->mac_addr_3);
-+}
-+
-+uint32_t fman_tgec_get_revision(struct tgec_regs *regs)
-+{
-+	return ioread32be(&regs->tgec_id);
-+}
-+
-+void fman_tgec_enable_interrupt(struct tgec_regs *regs, uint32_t ev_mask)
-+{
-+	iowrite32be(ioread32be(&regs->imask) | ev_mask, &regs->imask);
-+}
-+
-+void fman_tgec_disable_interrupt(struct tgec_regs *regs, uint32_t ev_mask)
-+{
-+	iowrite32be(ioread32be(&regs->imask) & ~ev_mask, &regs->imask);
-+}
-+
-+uint16_t fman_tgec_get_max_frame_len(struct tgec_regs *regs)
-+{
-+	return (uint16_t) ioread32be(&regs->maxfrm);
-+}
-+
-+void fman_tgec_defconfig(struct tgec_cfg *cfg)
-+{
-+	cfg->wan_mode_enable = DEFAULT_WAN_MODE_ENABLE;
-+	cfg->promiscuous_mode_enable = DEFAULT_PROMISCUOUS_MODE_ENABLE;
-+	cfg->pause_forward_enable = DEFAULT_PAUSE_FORWARD_ENABLE;
-+	cfg->pause_ignore = DEFAULT_PAUSE_IGNORE;
-+	cfg->tx_addr_ins_enable = DEFAULT_TX_ADDR_INS_ENABLE;
-+	cfg->loopback_enable = DEFAULT_LOOPBACK_ENABLE;
-+	cfg->cmd_frame_enable = DEFAULT_CMD_FRAME_ENABLE;
-+	cfg->rx_error_discard = DEFAULT_RX_ERROR_DISCARD;
-+	cfg->send_idle_enable = DEFAULT_SEND_IDLE_ENABLE;
-+	cfg->no_length_check_enable = DEFAULT_NO_LENGTH_CHECK_ENABLE;
-+	cfg->lgth_check_nostdr = DEFAULT_LGTH_CHECK_NOSTDR;
-+	cfg->time_stamp_enable = DEFAULT_TIME_STAMP_ENABLE;
-+	cfg->tx_ipg_length = DEFAULT_TX_IPG_LENGTH;
-+	cfg->max_frame_length = DEFAULT_MAX_FRAME_LENGTH;
-+	cfg->pause_quant = DEFAULT_PAUSE_QUANT;
-+#ifdef FM_TX_ECC_FRMS_ERRATA_10GMAC_A004
-+	cfg->skip_fman11_workaround = FALSE;
-+#endif /* FM_TX_ECC_FRMS_ERRATA_10GMAC_A004 */
-+}
-+
-+int fman_tgec_init(struct tgec_regs *regs, struct tgec_cfg *cfg,
-+		uint32_t exception_mask)
-+{
-+	uint32_t tmp;
-+
-+	/* Config */
-+	tmp = 0x40; /* CRC forward */
-+	if (cfg->wan_mode_enable)
-+		tmp |= CMD_CFG_WAN_MODE;
-+	if (cfg->promiscuous_mode_enable)
-+		tmp |= CMD_CFG_PROMIS_EN;
-+	if (cfg->pause_forward_enable)
-+		tmp |= CMD_CFG_PAUSE_FWD;
-+	if (cfg->pause_ignore)
-+		tmp |= CMD_CFG_PAUSE_IGNORE;
-+	if (cfg->tx_addr_ins_enable)
-+		tmp |= CMD_CFG_TX_ADDR_INS;
-+	if (cfg->loopback_enable)
-+		tmp |= CMD_CFG_LOOPBACK_EN;
-+	if (cfg->cmd_frame_enable)
-+		tmp |= CMD_CFG_CMD_FRM_EN;
-+	if (cfg->rx_error_discard)
-+		tmp |= CMD_CFG_RX_ER_DISC;
-+	if (cfg->send_idle_enable)
-+		tmp |= CMD_CFG_SEND_IDLE;
-+	if (cfg->no_length_check_enable)
-+		tmp |= CMD_CFG_NO_LEN_CHK;
-+	if (cfg->time_stamp_enable)
-+		tmp |= CMD_CFG_EN_TIMESTAMP;
-+	iowrite32be(tmp, &regs->command_config);
-+
-+	/* Max Frame Length */
-+	iowrite32be((uint32_t)cfg->max_frame_length, &regs->maxfrm);
-+	/* Pause Time */
-+	iowrite32be(cfg->pause_quant, &regs->pause_quant);
-+
-+	/* clear all pending events and set-up interrupts */
-+	fman_tgec_ack_event(regs, 0xffffffff);
-+	fman_tgec_enable_interrupt(regs, exception_mask);
-+
-+	return 0;
-+}
-+
-+void fman_tgec_set_erratum_tx_fifo_corruption_10gmac_a007(struct tgec_regs *regs)
-+{
-+	uint32_t tmp;
-+
-+	/* restore the default tx ipg Length */
-+	tmp = (ioread32be(&regs->tx_ipg_len) & ~TGEC_TX_IPG_LENGTH_MASK) | 12;
-+
-+	iowrite32be(tmp, &regs->tx_ipg_len);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.c
-@@ -0,0 +1,1096 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          memac.c
-+
-+ @Description   FM mEMAC driver
-+*//***************************************************************************/
-+
-+#include "std_ext.h"
-+#include "string_ext.h"
-+#include "error_ext.h"
-+#include "xx_ext.h"
-+#include "endian_ext.h"
-+#include "debug_ext.h"
-+
-+#include "fm_common.h"
-+#include "memac.h"
-+
-+
-+/*****************************************************************************/
-+/*                      Internal routines                                    */
-+/*****************************************************************************/
-+
-+/* ......................................................................... */
-+
-+static uint32_t GetMacAddrHashCode(uint64_t ethAddr)
-+{
-+    uint64_t    mask1, mask2;
-+    uint32_t    xorVal = 0;
-+    uint8_t     i, j;
-+
-+    for (i=0; i<6; i++)
-+    {
-+        mask1 = ethAddr & (uint64_t)0x01;
-+        ethAddr >>= 1;
-+
-+        for (j=0; j<7; j++)
-+        {
-+            mask2 = ethAddr & (uint64_t)0x01;
-+            mask1 ^= mask2;
-+            ethAddr >>= 1;
-+        }
-+
-+        xorVal |= (mask1 << (5-i));
-+    }
-+
-+    return xorVal;
-+}
-+
-+/* ......................................................................... */
-+
-+static void SetupSgmiiInternalPhy(t_Memac *p_Memac, uint8_t phyAddr)
-+{
-+    uint16_t    tmpReg16;
-+    e_EnetMode  enetMode;
-+
-+     /* In case the higher MACs are used (i.e. the MACs that should support 10G),
-+        speed=10000 is provided for SGMII ports. Temporary modify enet mode
-+        to 1G one, so MII functions can work correctly. */
-+    enetMode = p_Memac->enetMode;
-+
-+    /* SGMII mode + AN enable */
-+    tmpReg16 = PHY_SGMII_IF_MODE_AN | PHY_SGMII_IF_MODE_SGMII;
-+    if ((p_Memac->enetMode) == e_ENET_MODE_SGMII_2500)
-+        tmpReg16 = PHY_SGMII_CR_PHY_RESET | PHY_SGMII_IF_SPEED_GIGABIT | PHY_SGMII_IF_MODE_SGMII;
-+
-+    p_Memac->enetMode = MAKE_ENET_MODE(ENET_INTERFACE_FROM_MODE(p_Memac->enetMode), e_ENET_SPEED_1000);
-+    MEMAC_MII_WritePhyReg(p_Memac, phyAddr, 0x14, tmpReg16);
-+
-+    /* Device ability according to SGMII specification */
-+    tmpReg16 = PHY_SGMII_DEV_ABILITY_SGMII;
-+    MEMAC_MII_WritePhyReg(p_Memac, phyAddr, 0x4, tmpReg16);
-+
-+    /* Adjust link timer for SGMII  -
-+       According to Cisco SGMII specification the timer should be 1.6 ms.
-+       The link_timer register is configured in units of the clock.
-+       - When running as 1G SGMII, Serdes clock is 125 MHz, so
-+         unit = 1 / (125*10^6 Hz) = 8 ns.
-+         1.6 ms in units of 8 ns = 1.6ms / 8ns = 2 * 10^5 = 0x30d40
-+       - When running as 2.5G SGMII, Serdes clock is 312.5 MHz, so
-+         unit = 1 / (312.5*10^6 Hz) = 3.2 ns.
-+         1.6 ms in units of 3.2 ns = 1.6ms / 3.2ns = 5 * 10^5 = 0x7a120.
-+       Since link_timer value of 1G SGMII will be too short for 2.5 SGMII,
-+       we always set up here a value of 2.5 SGMII. */
-+    MEMAC_MII_WritePhyReg(p_Memac, phyAddr, 0x13, 0x0007);
-+    MEMAC_MII_WritePhyReg(p_Memac, phyAddr, 0x12, 0xa120);
-+
-+    /* Restart AN */
-+    tmpReg16 = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN;
-+    MEMAC_MII_WritePhyReg(p_Memac, phyAddr, 0x0, tmpReg16);
-+
-+    /* Restore original enet mode */
-+    p_Memac->enetMode = enetMode;
-+}
-+
-+/* ......................................................................... */
-+
-+static void SetupSgmiiInternalPhyBaseX(t_Memac *p_Memac, uint8_t phyAddr)
-+{
-+    uint16_t    tmpReg16;
-+    e_EnetMode  enetMode;
-+
-+     /* In case the higher MACs are used (i.e. the MACs that should support 10G),
-+        speed=10000 is provided for SGMII ports. Temporary modify enet mode
-+        to 1G one, so MII functions can work correctly. */
-+    enetMode = p_Memac->enetMode;
-+    p_Memac->enetMode = MAKE_ENET_MODE(ENET_INTERFACE_FROM_MODE(p_Memac->enetMode), e_ENET_SPEED_1000);
-+
-+    /* 1000BaseX mode */
-+    tmpReg16 = PHY_SGMII_IF_MODE_1000X;
-+    MEMAC_MII_WritePhyReg(p_Memac, phyAddr, 0x14, tmpReg16);
-+
-+    /* AN Device capability  */
-+    tmpReg16 = PHY_SGMII_DEV_ABILITY_1000X;
-+    MEMAC_MII_WritePhyReg(p_Memac, phyAddr, 0x4, tmpReg16);
-+
-+    /* Adjust link timer for SGMII  -
-+       For Serdes 1000BaseX auto-negotiation the timer should be 10 ms.
-+       The link_timer register is configured in units of the clock.
-+       - When running as 1G SGMII, Serdes clock is 125 MHz, so
-+         unit = 1 / (125*10^6 Hz) = 8 ns.
-+         10 ms in units of 8 ns = 10ms / 8ns = 1250000 = 0x1312d0
-+       - When running as 2.5G SGMII, Serdes clock is 312.5 MHz, so
-+         unit = 1 / (312.5*10^6 Hz) = 3.2 ns.
-+         10 ms in units of 3.2 ns = 10ms / 3.2ns = 3125000 = 0x2faf08.
-+       Since link_timer value of 1G SGMII will be too short for 2.5 SGMII,
-+       we always set up here a value of 2.5 SGMII. */
-+    MEMAC_MII_WritePhyReg(p_Memac, phyAddr, 0x13, 0x002f);
-+    MEMAC_MII_WritePhyReg(p_Memac, phyAddr, 0x12, 0xaf08);
-+
-+    /* Restart AN */
-+    tmpReg16 = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN;
-+    MEMAC_MII_WritePhyReg(p_Memac, phyAddr, 0x0, tmpReg16);
-+
-+    /* Restore original enet mode */
-+    p_Memac->enetMode = enetMode;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error CheckInitParameters(t_Memac *p_Memac)
-+{
-+    e_FmMacType portType;
-+
-+    portType = ((ENET_SPEED_FROM_MODE(p_Memac->enetMode) < e_ENET_SPEED_10000) ? e_FM_MAC_1G : e_FM_MAC_10G);
-+
-+#if (FM_MAX_NUM_OF_10G_MACS > 0)
-+    if ((portType == e_FM_MAC_10G) && (p_Memac->macId >= FM_MAX_NUM_OF_10G_MACS))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("10G MAC ID must be less than %d", FM_MAX_NUM_OF_10G_MACS));
-+#endif /* (FM_MAX_NUM_OF_10G_MACS > 0) */
-+
-+    if ((portType == e_FM_MAC_1G) && (p_Memac->macId >= FM_MAX_NUM_OF_1G_MACS))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("1G MAC ID must be less than %d", FM_MAX_NUM_OF_1G_MACS));
-+    if (p_Memac->addr == 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Ethernet MAC must have a valid MAC address"));
-+    if (!p_Memac->f_Exception)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Uninitialized f_Exception"));
-+    if (!p_Memac->f_Event)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Uninitialized f_Event"));
-+#ifdef FM_LEN_CHECK_ERRATA_FMAN_SW002
-+    if (!p_Memac->p_MemacDriverParam->no_length_check_enable)
-+       RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("LengthCheck!"));
-+#endif /* FM_LEN_CHECK_ERRATA_FMAN_SW002 */
-+
-+    return E_OK;
-+}
-+
-+/* ........................................................................... */
-+
-+static void MemacErrException(t_Handle h_Memac)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+    uint32_t    event, imask;
-+
-+    event = fman_memac_get_event(p_Memac->p_MemMap, 0xffffffff);
-+    imask = fman_memac_get_interrupt_mask(p_Memac->p_MemMap);
-+
-+    /* Imask include both error and notification/event bits.
-+       Leaving only error bits enabled by imask.
-+       The imask error bits are shifted by 16 bits offset from
-+       their corresponding location in the ievent - hence the >> 16 */
-+    event &= ((imask & MEMAC_ALL_ERRS_IMASK) >> 16);
-+
-+    fman_memac_ack_event(p_Memac->p_MemMap, event);
-+
-+    if (event & MEMAC_IEVNT_TS_ECC_ER)
-+        p_Memac->f_Exception(p_Memac->h_App, e_FM_MAC_EX_TS_FIFO_ECC_ERR);
-+    if (event & MEMAC_IEVNT_TX_ECC_ER)
-+        p_Memac->f_Exception(p_Memac->h_App, e_FM_MAC_EX_10G_1TX_ECC_ER);
-+    if (event & MEMAC_IEVNT_RX_ECC_ER)
-+        p_Memac->f_Exception(p_Memac->h_App, e_FM_MAC_EX_10G_RX_ECC_ER);
-+}
-+
-+static void MemacException(t_Handle h_Memac)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+    uint32_t    event, imask;
-+
-+    event = fman_memac_get_event(p_Memac->p_MemMap, 0xffffffff);
-+    imask = fman_memac_get_interrupt_mask(p_Memac->p_MemMap);
-+
-+    /* Imask include both error and notification/event bits.
-+       Leaving only error bits enabled by imask.
-+       The imask error bits are shifted by 16 bits offset from
-+       their corresponding location in the ievent - hence the >> 16 */
-+    event &= ((imask & MEMAC_ALL_ERRS_IMASK) >> 16);
-+
-+    fman_memac_ack_event(p_Memac->p_MemMap, event);
-+
-+    if (event & MEMAC_IEVNT_MGI)
-+        p_Memac->f_Exception(p_Memac->h_App, e_FM_MAC_EX_MAGIC_PACKET_INDICATION);
-+}
-+
-+/* ......................................................................... */
-+
-+static void FreeInitResources(t_Memac *p_Memac)
-+{
-+    e_FmMacType portType;
-+
-+    portType =
-+        ((ENET_SPEED_FROM_MODE(p_Memac->enetMode) < e_ENET_SPEED_10000) ? e_FM_MAC_1G : e_FM_MAC_10G);
-+
-+    if (portType == e_FM_MAC_10G)
-+        FmUnregisterIntr(p_Memac->fmMacControllerDriver.h_Fm, e_FM_MOD_10G_MAC, p_Memac->macId, e_FM_INTR_TYPE_ERR);
-+    else
-+        FmUnregisterIntr(p_Memac->fmMacControllerDriver.h_Fm, e_FM_MOD_1G_MAC, p_Memac->macId, e_FM_INTR_TYPE_ERR);
-+
-+    /* release the driver's group hash table */
-+    FreeHashTable(p_Memac->p_MulticastAddrHash);
-+    p_Memac->p_MulticastAddrHash =   NULL;
-+
-+    /* release the driver's individual hash table */
-+    FreeHashTable(p_Memac->p_UnicastAddrHash);
-+    p_Memac->p_UnicastAddrHash =     NULL;
-+}
-+
-+
-+/*****************************************************************************/
-+/*                     mEMAC API routines                                    */
-+/*****************************************************************************/
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacEnable(t_Handle h_Memac,  e_CommMode mode)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    fman_memac_enable(p_Memac->p_MemMap, (mode & e_COMM_MODE_RX), (mode & e_COMM_MODE_TX));
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacDisable (t_Handle h_Memac, e_CommMode mode)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    fman_memac_disable(p_Memac->p_MemMap, (mode & e_COMM_MODE_RX), (mode & e_COMM_MODE_TX));
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacSetPromiscuous(t_Handle h_Memac, bool newVal)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    fman_memac_set_promiscuous(p_Memac->p_MemMap, newVal);
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error MemacAdjustLink(t_Handle h_Memac, e_EnetSpeed speed, bool fullDuplex)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    if ((speed >= e_ENET_SPEED_1000) && (!fullDuplex))
-+        RETURN_ERROR(MAJOR, E_CONFLICT,
-+                     ("Ethernet MAC 1G or 10G does not support half-duplex"));
-+
-+    fman_memac_adjust_link(p_Memac->p_MemMap,
-+                           (enum enet_interface)ENET_INTERFACE_FROM_MODE(p_Memac->enetMode),
-+                           (enum enet_speed)speed,
-+                           fullDuplex);
-+    return E_OK;
-+}
-+
-+
-+/*****************************************************************************/
-+/*                      Memac Configs modification functions                 */
-+/*****************************************************************************/
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacConfigLoopback(t_Handle h_Memac, bool newVal)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    p_Memac->p_MemacDriverParam->loopback_enable = newVal;
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacConfigWan(t_Handle h_Memac, bool newVal)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    p_Memac->p_MemacDriverParam->wan_mode_enable = newVal;
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacConfigMaxFrameLength(t_Handle h_Memac, uint16_t newVal)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    p_Memac->p_MemacDriverParam->max_frame_length = newVal;
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacConfigPad(t_Handle h_Memac, bool newVal)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    p_Memac->p_MemacDriverParam->pad_enable = newVal;
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacConfigLengthCheck(t_Handle h_Memac, bool newVal)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    p_Memac->p_MemacDriverParam->no_length_check_enable = !newVal;
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacConfigException(t_Handle h_Memac, e_FmMacExceptions exception, bool enable)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+    uint32_t    bitMask = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    GET_EXCEPTION_FLAG(bitMask, exception);
-+    if (bitMask)
-+    {
-+        if (enable)
-+            p_Memac->exceptions |= bitMask;
-+        else
-+            p_Memac->exceptions &= ~bitMask;
-+    }
-+    else
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Undefined exception"));
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacConfigResetOnInit(t_Handle h_Memac, bool enable)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    p_Memac->p_MemacDriverParam->reset_on_init = enable;
-+
-+    return E_OK;
-+}
-+
-+
-+/*****************************************************************************/
-+/*                      Memac Run Time API functions                         */
-+/*****************************************************************************/
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacSetTxPauseFrames(t_Handle h_Memac,
-+                                     uint8_t  priority,
-+                                     uint16_t pauseTime,
-+                                     uint16_t threshTime)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    if (priority != 0xFF)
-+    {
-+        bool   PortConfigured, PreFetchEnabled;
-+
-+        if (FmGetTnumAgingPeriod(p_Memac->fmMacControllerDriver.h_Fm) == 0)
-+            RETURN_ERROR(MAJOR, E_CONFLICT, ("For PFC operation, TNUM aging must be enabled"));
-+
-+        FmGetPortPreFetchConfiguration(p_Memac->fmMacControllerDriver.h_Fm,
-+                                       p_Memac->fmMacControllerDriver.macId,
-+                                       &PortConfigured,
-+                                       &PreFetchEnabled);
-+
-+        if ((ENET_SPEED_FROM_MODE(p_Memac->fmMacControllerDriver.enetMode) == e_ENET_SPEED_1000) && !PortConfigured)
-+            DBG(INFO, ("For PFC correct operation, prefetch must be configured on the FM Tx PORT"));
-+
-+        if ((ENET_SPEED_FROM_MODE(p_Memac->fmMacControllerDriver.enetMode) == e_ENET_SPEED_1000) && PortConfigured && !PreFetchEnabled)
-+            DBG(WARNING, ("For PFC correct operation, prefetch must be configured on the FM Tx PORT"));
-+    }
-+
-+    fman_memac_set_tx_pause_frames(p_Memac->p_MemMap, priority, pauseTime, threshTime);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacSetTxAutoPauseFrames(t_Handle h_Memac,
-+                                         uint16_t pauseTime)
-+{
-+    return MemacSetTxPauseFrames(h_Memac, FM_MAC_NO_PFC, pauseTime, 0);
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacSetRxIgnorePauseFrames(t_Handle h_Memac, bool en)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    fman_memac_set_rx_ignore_pause_frames(p_Memac->p_MemMap, en);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacSetWakeOnLan(t_Handle h_Memac, bool en)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    fman_memac_set_wol(p_Memac->p_MemMap, en);
-+
-+    return E_OK;
-+}
-+
-+/* .............................................................................. */
-+
-+static t_Error MemacEnable1588TimeStamp(t_Handle h_Memac)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+UNUSED(p_Memac);
-+DBG(WARNING, ("mEMAC has 1588 always enabled!"));
-+
-+    return E_OK;
-+}
-+
-+/* Counters handling */
-+/* ......................................................................... */
-+
-+static t_Error MemacGetStatistics(t_Handle h_Memac, t_FmMacStatistics *p_Statistics)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_Statistics, E_NULL_POINTER);
-+
-+    p_Statistics->eStatPkts64           = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R64);
-+    p_Statistics->eStatPkts65to127      = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R127);
-+    p_Statistics->eStatPkts128to255     = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R255);
-+    p_Statistics->eStatPkts256to511     = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R511);
-+    p_Statistics->eStatPkts512to1023    = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R1023);
-+    p_Statistics->eStatPkts1024to1518   = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R1518);
-+    p_Statistics->eStatPkts1519to1522   = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R1519X);
-+/* */
-+    p_Statistics->eStatFragments        = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_RFRG);
-+    p_Statistics->eStatJabbers          = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_RJBR);
-+
-+    p_Statistics->eStatsDropEvents      = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_RDRP);
-+    p_Statistics->eStatCRCAlignErrors   = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_RALN);
-+
-+    p_Statistics->eStatUndersizePkts    = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_TUND);
-+    p_Statistics->eStatOversizePkts     = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_ROVR);
-+/* Pause */
-+    p_Statistics->reStatPause           = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_RXPF);
-+    p_Statistics->teStatPause           = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_TXPF);
-+
-+/* MIB II */
-+    p_Statistics->ifInOctets            = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_ROCT);
-+    p_Statistics->ifInUcastPkts         = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_RUCA);
-+    p_Statistics->ifInMcastPkts         = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_RMCA);
-+    p_Statistics->ifInBcastPkts         = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_RBCA);
-+    p_Statistics->ifInPkts              = p_Statistics->ifInUcastPkts
-+                                        + p_Statistics->ifInMcastPkts
-+                                        + p_Statistics->ifInBcastPkts;
-+    p_Statistics->ifInDiscards          = 0;
-+    p_Statistics->ifInErrors            = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_RERR);
-+
-+    p_Statistics->ifOutOctets           = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_TOCT);
-+    p_Statistics->ifOutUcastPkts        = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_TUCA);
-+    p_Statistics->ifOutMcastPkts        = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_TMCA);
-+    p_Statistics->ifOutBcastPkts        = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_TBCA);
-+    p_Statistics->ifOutPkts             = p_Statistics->ifOutUcastPkts
-+                                        + p_Statistics->ifOutMcastPkts
-+                                        + p_Statistics->ifOutBcastPkts;
-+    p_Statistics->ifOutDiscards         = 0;
-+    p_Statistics->ifOutErrors           = fman_memac_get_counter(p_Memac->p_MemMap,  E_MEMAC_COUNTER_TERR);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacModifyMacAddress (t_Handle h_Memac, t_EnetAddr *p_EnetAddr)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    fman_memac_add_addr_in_paddr(p_Memac->p_MemMap, (uint8_t *)(*p_EnetAddr), 0);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacResetCounters (t_Handle h_Memac)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    fman_memac_reset_stat(p_Memac->p_MemMap);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacAddExactMatchMacAddress(t_Handle h_Memac, t_EnetAddr *p_EthAddr)
-+{
-+    t_Memac     *p_Memac = (t_Memac *) h_Memac;
-+    uint64_t    ethAddr;
-+    uint8_t     paddrNum;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    ethAddr = ENET_ADDR_TO_UINT64(*p_EthAddr);
-+
-+    if (ethAddr & GROUP_ADDRESS)
-+        /* Multicast address has no effect in PADDR */
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Multicast address"));
-+
-+    /* Make sure no PADDR contains this address */
-+    for (paddrNum = 0; paddrNum < MEMAC_NUM_OF_PADDRS; paddrNum++)
-+        if (p_Memac->indAddrRegUsed[paddrNum])
-+            if (p_Memac->paddr[paddrNum] == ethAddr)
-+                RETURN_ERROR(MAJOR, E_ALREADY_EXISTS, NO_MSG);
-+
-+    /* Find first unused PADDR */
-+    for (paddrNum = 0; paddrNum < MEMAC_NUM_OF_PADDRS; paddrNum++)
-+        if (!(p_Memac->indAddrRegUsed[paddrNum]))
-+        {
-+            /* mark this PADDR as used */
-+            p_Memac->indAddrRegUsed[paddrNum] = TRUE;
-+            /* store address */
-+            p_Memac->paddr[paddrNum] = ethAddr;
-+
-+            /* put in hardware */
-+            fman_memac_add_addr_in_paddr(p_Memac->p_MemMap, (uint8_t*)(*p_EthAddr), paddrNum);
-+            p_Memac->numOfIndAddrInRegs++;
-+
-+            return E_OK;
-+        }
-+
-+    /* No free PADDR */
-+    RETURN_ERROR(MAJOR, E_FULL, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacDelExactMatchMacAddress(t_Handle h_Memac, t_EnetAddr *p_EthAddr)
-+{
-+    t_Memac     *p_Memac = (t_Memac *) h_Memac;
-+    uint64_t    ethAddr;
-+    uint8_t     paddrNum;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    ethAddr = ENET_ADDR_TO_UINT64(*p_EthAddr);
-+
-+    /* Find used PADDR containing this address */
-+    for (paddrNum = 0; paddrNum < MEMAC_NUM_OF_PADDRS; paddrNum++)
-+    {
-+        if ((p_Memac->indAddrRegUsed[paddrNum]) &&
-+            (p_Memac->paddr[paddrNum] == ethAddr))
-+        {
-+            /* mark this PADDR as not used */
-+            p_Memac->indAddrRegUsed[paddrNum] = FALSE;
-+            /* clear in hardware */
-+            fman_memac_clear_addr_in_paddr(p_Memac->p_MemMap, paddrNum);
-+            p_Memac->numOfIndAddrInRegs--;
-+
-+            return E_OK;
-+        }
-+    }
-+
-+    RETURN_ERROR(MAJOR, E_NOT_FOUND, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacGetId(t_Handle h_Memac, uint32_t *macId)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    *macId = p_Memac->macId;
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+
-+static t_Error MemacAddHashMacAddress(t_Handle h_Memac, t_EnetAddr *p_EthAddr)
-+{
-+    t_Memac             *p_Memac = (t_Memac *)h_Memac;
-+    t_EthHashEntry      *p_HashEntry;
-+    uint32_t            hash;
-+    uint64_t            ethAddr;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    ethAddr = ENET_ADDR_TO_UINT64(*p_EthAddr);
-+
-+    if (!(ethAddr & GROUP_ADDRESS))
-+        /* Unicast addresses not supported in hash */
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("Unicast Address"));
-+
-+    hash = GetMacAddrHashCode(ethAddr) & HASH_CTRL_ADDR_MASK;
-+
-+    /* Create element to be added to the driver hash table */
-+    p_HashEntry = (t_EthHashEntry *)XX_Malloc(sizeof(t_EthHashEntry));
-+    p_HashEntry->addr = ethAddr;
-+    INIT_LIST(&p_HashEntry->node);
-+
-+    LIST_AddToTail(&(p_HashEntry->node), &(p_Memac->p_MulticastAddrHash->p_Lsts[hash]));
-+    fman_memac_set_hash_table(p_Memac->p_MemMap, (hash | HASH_CTRL_MCAST_EN));
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacDelHashMacAddress(t_Handle h_Memac, t_EnetAddr *p_EthAddr)
-+{
-+    t_Memac             *p_Memac = (t_Memac *)h_Memac;
-+    t_EthHashEntry      *p_HashEntry = NULL;
-+    t_List              *p_Pos;
-+    uint32_t            hash;
-+    uint64_t            ethAddr;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    ethAddr = ENET_ADDR_TO_UINT64(*p_EthAddr);
-+
-+    hash = GetMacAddrHashCode(ethAddr) & HASH_CTRL_ADDR_MASK;
-+
-+    LIST_FOR_EACH(p_Pos, &(p_Memac->p_MulticastAddrHash->p_Lsts[hash]))
-+    {
-+        p_HashEntry = ETH_HASH_ENTRY_OBJ(p_Pos);
-+        if (p_HashEntry->addr == ethAddr)
-+        {
-+            LIST_DelAndInit(&p_HashEntry->node);
-+            XX_Free(p_HashEntry);
-+            break;
-+        }
-+    }
-+    if (LIST_IsEmpty(&p_Memac->p_MulticastAddrHash->p_Lsts[hash]))
-+        fman_memac_set_hash_table(p_Memac->p_MemMap, (hash & ~HASH_CTRL_MCAST_EN));
-+
-+    return E_OK;
-+}
-+
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacSetException(t_Handle h_Memac, e_FmMacExceptions exception, bool enable)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+    uint32_t    bitMask = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+
-+    GET_EXCEPTION_FLAG(bitMask, exception);
-+    if (bitMask)
-+    {
-+        if (enable)
-+            p_Memac->exceptions |= bitMask;
-+        else
-+            p_Memac->exceptions &= ~bitMask;
-+    }
-+    else
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Undefined exception"));
-+
-+    fman_memac_set_exception(p_Memac->p_MemMap, bitMask, enable);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static uint16_t MemacGetMaxFrameLength(t_Handle h_Memac)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_Memac, E_INVALID_HANDLE, 0);
-+    SANITY_CHECK_RETURN_VALUE(!p_Memac->p_MemacDriverParam, E_INVALID_STATE, 0);
-+
-+    return fman_memac_get_max_frame_len(p_Memac->p_MemMap);
-+}
-+
-+static t_Error MemacInitInternalPhy(t_Handle h_Memac)
-+{
-+    t_Memac *p_Memac = (t_Memac *)h_Memac;
-+    uint8_t i, phyAddr;
-+
-+    if (ENET_INTERFACE_FROM_MODE(p_Memac->enetMode) == e_ENET_IF_SGMII)
-+    {
-+        /* Configure internal SGMII PHY */
-+        if (p_Memac->enetMode & ENET_IF_SGMII_BASEX)
-+            SetupSgmiiInternalPhyBaseX(p_Memac, PHY_MDIO_ADDR);
-+        else
-+            SetupSgmiiInternalPhy(p_Memac, PHY_MDIO_ADDR);
-+    }
-+    else if (ENET_INTERFACE_FROM_MODE(p_Memac->enetMode) == e_ENET_IF_QSGMII)
-+    {
-+        /* Configure 4 internal SGMII PHYs */
-+        for (i = 0; i < 4; i++)
-+        {
-+            /* QSGMII PHY address occupies 3 upper bits of 5-bit
-+               phyAddress; the lower 2 bits are used to extend
-+               register address space and access each one of 4
-+               ports inside QSGMII. */
-+            phyAddr = (uint8_t)((PHY_MDIO_ADDR << 2) | i);
-+            if (p_Memac->enetMode & ENET_IF_SGMII_BASEX)
-+                SetupSgmiiInternalPhyBaseX(p_Memac, phyAddr);
-+            else
-+                SetupSgmiiInternalPhy(p_Memac, phyAddr);
-+        }
-+    }
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+/*                      mEMAC Init & Free API                                   */
-+/*****************************************************************************/
-+
-+/* ......................................................................... */
-+void *g_MemacRegs;
-+static t_Error MemacInit(t_Handle h_Memac)
-+{
-+    t_Memac                 *p_Memac = (t_Memac *)h_Memac;
-+    struct memac_cfg        *p_MemacDriverParam;
-+    enum enet_interface     enet_interface;
-+    enum enet_speed         enet_speed;
-+    t_EnetAddr              ethAddr;
-+    e_FmMacType             portType;
-+    t_Error                 err;
-+    bool                    slow_10g_if = FALSE;
-+    if (p_Memac->macId == 3) /* This is a quick WA */
-+		g_MemacRegs = p_Memac->p_MemMap;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_Memac->fmMacControllerDriver.h_Fm, E_INVALID_HANDLE);
-+
-+    FM_GetRevision(p_Memac->fmMacControllerDriver.h_Fm, &p_Memac->fmMacControllerDriver.fmRevInfo);
-+    if (p_Memac->fmMacControllerDriver.fmRevInfo.majorRev == 6 &&
-+        p_Memac->fmMacControllerDriver.fmRevInfo.minorRev == 4)
-+        slow_10g_if = TRUE;
-+
-+    CHECK_INIT_PARAMETERS(p_Memac, CheckInitParameters);
-+
-+    p_MemacDriverParam = p_Memac->p_MemacDriverParam;
-+
-+    portType =
-+        ((ENET_SPEED_FROM_MODE(p_Memac->enetMode) < e_ENET_SPEED_10000) ? e_FM_MAC_1G : e_FM_MAC_10G);
-+
-+    /* First, reset the MAC if desired. */
-+    if (p_MemacDriverParam->reset_on_init)
-+        fman_memac_reset(p_Memac->p_MemMap);
-+
-+    /* MAC Address */
-+    MAKE_ENET_ADDR_FROM_UINT64(p_Memac->addr, ethAddr);
-+    fman_memac_add_addr_in_paddr(p_Memac->p_MemMap, (uint8_t*)ethAddr, 0);
-+
-+    enet_interface = (enum enet_interface) ENET_INTERFACE_FROM_MODE(p_Memac->enetMode);
-+    enet_speed = (enum enet_speed) ENET_SPEED_FROM_MODE(p_Memac->enetMode);
-+
-+    fman_memac_init(p_Memac->p_MemMap,
-+               p_Memac->p_MemacDriverParam,
-+               enet_interface,
-+               enet_speed,
-+               slow_10g_if,
-+               p_Memac->exceptions);
-+
-+#ifdef FM_RX_FIFO_CORRUPT_ERRATA_10GMAC_A006320
-+    {
-+    	uint32_t tmpReg = 0;
-+
-+    	FM_GetRevision(p_Memac->fmMacControllerDriver.h_Fm, &p_Memac->fmMacControllerDriver.fmRevInfo);
-+        /* check the FMAN version - the bug exists only in rev1 */
-+        if ((p_Memac->fmMacControllerDriver.fmRevInfo.majorRev == 6) &&
-+        	(p_Memac->fmMacControllerDriver.fmRevInfo.minorRev == 0))
-+        {
-+        	/* MAC strips CRC from received frames - this workaround should
-+        	   decrease the likelihood of bug appearance
-+            */
-+			tmpReg = GET_UINT32(p_Memac->p_MemMap->command_config);
-+			tmpReg &= ~CMD_CFG_CRC_FWD;
-+			WRITE_UINT32(p_Memac->p_MemMap->command_config, tmpReg);
-+			/* DBG(WARNING, ("mEMAC strips CRC from received frames as part of A006320 errata workaround"));*/
-+        }
-+    }
-+#endif /* FM_RX_FIFO_CORRUPT_ERRATA_10GMAC_A006320 */
-+
-+    MemacInitInternalPhy(h_Memac);
-+
-+    /* Max Frame Length */
-+    err = FmSetMacMaxFrame(p_Memac->fmMacControllerDriver.h_Fm,
-+                           portType,
-+                           p_Memac->fmMacControllerDriver.macId,
-+                           p_MemacDriverParam->max_frame_length);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, ("settings Mac max frame length is FAILED"));
-+
-+    p_Memac->p_MulticastAddrHash = AllocHashTable(HASH_TABLE_SIZE);
-+    if (!p_Memac->p_MulticastAddrHash)
-+    {
-+        FreeInitResources(p_Memac);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("allocation hash table is FAILED"));
-+    }
-+
-+    p_Memac->p_UnicastAddrHash = AllocHashTable(HASH_TABLE_SIZE);
-+    if (!p_Memac->p_UnicastAddrHash)
-+    {
-+        FreeInitResources(p_Memac);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("allocation hash table is FAILED"));
-+    }
-+
-+    FmRegisterIntr(p_Memac->fmMacControllerDriver.h_Fm,
-+                   (portType == e_FM_MAC_10G) ? e_FM_MOD_10G_MAC : e_FM_MOD_1G_MAC,
-+                   p_Memac->macId,
-+                   e_FM_INTR_TYPE_ERR,
-+                   MemacErrException,
-+                   p_Memac);
-+
-+    FmRegisterIntr(p_Memac->fmMacControllerDriver.h_Fm,
-+                   (portType == e_FM_MAC_10G) ? e_FM_MOD_10G_MAC : e_FM_MOD_1G_MAC,
-+                   p_Memac->macId,
-+                   e_FM_INTR_TYPE_NORMAL,
-+                   MemacException,
-+                   p_Memac);
-+
-+    XX_Free(p_MemacDriverParam);
-+    p_Memac->p_MemacDriverParam = NULL;
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error MemacFree(t_Handle h_Memac)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+
-+    if (p_Memac->p_MemacDriverParam)
-+    {
-+        /* Called after config */
-+        XX_Free(p_Memac->p_MemacDriverParam);
-+        p_Memac->p_MemacDriverParam = NULL;
-+    }
-+    else
-+        /* Called after init */
-+        FreeInitResources(p_Memac);
-+
-+    XX_Free(p_Memac);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static void InitFmMacControllerDriver(t_FmMacControllerDriver *p_FmMacControllerDriver)
-+{
-+    p_FmMacControllerDriver->f_FM_MAC_Init                      = MemacInit;
-+    p_FmMacControllerDriver->f_FM_MAC_Free                      = MemacFree;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_SetStatistics             = NULL;
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigLoopback            = MemacConfigLoopback;
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigMaxFrameLength      = MemacConfigMaxFrameLength;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigWan                 = MemacConfigWan;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigPadAndCrc           = MemacConfigPad;
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigHalfDuplex          = NULL; /* half-duplex is detected automatically */
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigLengthCheck         = MemacConfigLengthCheck;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigException           = MemacConfigException;
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigResetOnInit         = MemacConfigResetOnInit;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_SetException              = MemacSetException;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_Enable1588TimeStamp       = MemacEnable1588TimeStamp; /* always enabled */
-+    p_FmMacControllerDriver->f_FM_MAC_Disable1588TimeStamp      = NULL;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_SetPromiscuous            = MemacSetPromiscuous;
-+    p_FmMacControllerDriver->f_FM_MAC_AdjustLink                = MemacAdjustLink;
-+    p_FmMacControllerDriver->f_FM_MAC_RestartAutoneg            = NULL;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_Enable                    = MemacEnable;
-+    p_FmMacControllerDriver->f_FM_MAC_Disable                   = MemacDisable;
-+    p_FmMacControllerDriver->f_FM_MAC_Resume                    = MemacInitInternalPhy;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_SetTxAutoPauseFrames      = MemacSetTxAutoPauseFrames;
-+    p_FmMacControllerDriver->f_FM_MAC_SetTxPauseFrames          = MemacSetTxPauseFrames;
-+    p_FmMacControllerDriver->f_FM_MAC_SetRxIgnorePauseFrames    = MemacSetRxIgnorePauseFrames;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_SetWakeOnLan              = MemacSetWakeOnLan;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_ResetCounters             = MemacResetCounters;
-+    p_FmMacControllerDriver->f_FM_MAC_GetStatistics             = MemacGetStatistics;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_ModifyMacAddr             = MemacModifyMacAddress;
-+    p_FmMacControllerDriver->f_FM_MAC_AddHashMacAddr            = MemacAddHashMacAddress;
-+    p_FmMacControllerDriver->f_FM_MAC_RemoveHashMacAddr         = MemacDelHashMacAddress;
-+    p_FmMacControllerDriver->f_FM_MAC_AddExactMatchMacAddr      = MemacAddExactMatchMacAddress;
-+    p_FmMacControllerDriver->f_FM_MAC_RemovelExactMatchMacAddr  = MemacDelExactMatchMacAddress;
-+    p_FmMacControllerDriver->f_FM_MAC_GetId                     = MemacGetId;
-+    p_FmMacControllerDriver->f_FM_MAC_GetVersion                = NULL;
-+    p_FmMacControllerDriver->f_FM_MAC_GetMaxFrameLength         = MemacGetMaxFrameLength;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_MII_WritePhyReg           = MEMAC_MII_WritePhyReg;
-+    p_FmMacControllerDriver->f_FM_MAC_MII_ReadPhyReg            = MEMAC_MII_ReadPhyReg;
-+}
-+
-+
-+/*****************************************************************************/
-+/*                      mEMAC Config Main Entry                             */
-+/*****************************************************************************/
-+
-+/* ......................................................................... */
-+
-+t_Handle MEMAC_Config(t_FmMacParams *p_FmMacParam)
-+{
-+    t_Memac             *p_Memac;
-+    struct memac_cfg    *p_MemacDriverParam;
-+    uintptr_t           baseAddr;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmMacParam, E_NULL_POINTER, NULL);
-+
-+    baseAddr = p_FmMacParam->baseAddr;
-+    /* Allocate memory for the mEMAC data structure */
-+    p_Memac = (t_Memac *)XX_Malloc(sizeof(t_Memac));
-+    if (!p_Memac)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("mEMAC driver structure"));
-+        return NULL;
-+    }
-+    memset(p_Memac, 0, sizeof(t_Memac));
-+    InitFmMacControllerDriver(&p_Memac->fmMacControllerDriver);
-+
-+    /* Allocate memory for the mEMAC driver parameters data structure */
-+    p_MemacDriverParam = (struct memac_cfg *)XX_Malloc(sizeof(struct memac_cfg));
-+    if (!p_MemacDriverParam)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("mEMAC driver parameters"));
-+        XX_Free(p_Memac);
-+        return NULL;
-+    }
-+    memset(p_MemacDriverParam, 0, sizeof(struct memac_cfg));
-+
-+    /* Plant parameter structure pointer */
-+    p_Memac->p_MemacDriverParam = p_MemacDriverParam;
-+
-+    fman_memac_defconfig(p_MemacDriverParam);
-+
-+    p_Memac->addr           = ENET_ADDR_TO_UINT64(p_FmMacParam->addr);
-+
-+    p_Memac->p_MemMap       = (struct memac_regs *)UINT_TO_PTR(baseAddr);
-+    p_Memac->p_MiiMemMap    = (struct memac_mii_access_mem_map*)UINT_TO_PTR(baseAddr + MEMAC_TO_MII_OFFSET);
-+
-+    p_Memac->enetMode       = p_FmMacParam->enetMode;
-+    p_Memac->macId          = p_FmMacParam->macId;
-+    p_Memac->exceptions     = MEMAC_default_exceptions;
-+    p_Memac->f_Exception    = p_FmMacParam->f_Exception;
-+    p_Memac->f_Event        = p_FmMacParam->f_Event;
-+    p_Memac->h_App          = p_FmMacParam->h_App;
-+
-+    return p_Memac;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.h
-@@ -0,0 +1,110 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          memac.h
-+
-+ @Description   FM Multirate Ethernet MAC (mEMAC)
-+*//***************************************************************************/
-+#ifndef __MEMAC_H
-+#define __MEMAC_H
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "list_ext.h"
-+
-+#include "fsl_fman_memac_mii_acc.h"
-+#include "fm_mac.h"
-+#include "fsl_fman_memac.h"
-+
-+
-+#define MEMAC_default_exceptions    \
-+        ((uint32_t)(MEMAC_IMASK_TSECC_ER | MEMAC_IMASK_TECC_ER | MEMAC_IMASK_RECC_ER | MEMAC_IMASK_MGI))
-+
-+#define GET_EXCEPTION_FLAG(bitMask, exception)       switch (exception){    \
-+    case e_FM_MAC_EX_10G_1TX_ECC_ER:                                        \
-+        bitMask = MEMAC_IMASK_TECC_ER; break;                               \
-+    case e_FM_MAC_EX_10G_RX_ECC_ER:                                         \
-+        bitMask = MEMAC_IMASK_RECC_ER; break;                               \
-+    case e_FM_MAC_EX_TS_FIFO_ECC_ERR:                                       \
-+        bitMask = MEMAC_IMASK_TSECC_ER; break;                              \
-+    case e_FM_MAC_EX_MAGIC_PACKET_INDICATION:                               \
-+        bitMask = MEMAC_IMASK_MGI; break;                                   \
-+    default: bitMask = 0;break;}
-+
-+
-+typedef struct
-+{
-+    t_FmMacControllerDriver     fmMacControllerDriver;               /**< Upper Mac control block */
-+    t_Handle                    h_App;                               /**< Handle to the upper layer application  */
-+    struct memac_regs           *p_MemMap;                           /**< Pointer to MAC memory mapped registers */
-+    struct memac_mii_access_mem_map *p_MiiMemMap;                        /**< Pointer to MII memory mapped registers */
-+    uint64_t                    addr;                                /**< MAC address of device */
-+    e_EnetMode                  enetMode;                            /**< Ethernet physical interface  */
-+    t_FmMacExceptionCallback    *f_Exception;
-+    int                         mdioIrq;
-+    t_FmMacExceptionCallback    *f_Event;
-+    bool                        indAddrRegUsed[MEMAC_NUM_OF_PADDRS]; /**< Whether a particular individual address recognition register is being used */
-+    uint64_t                    paddr[MEMAC_NUM_OF_PADDRS];          /**< MAC address for particular individual address recognition register */
-+    uint8_t                     numOfIndAddrInRegs;                  /**< Number of individual addresses in registers for this station. */
-+    t_EthHash                   *p_MulticastAddrHash;                /**< Pointer to driver's global address hash table  */
-+    t_EthHash                   *p_UnicastAddrHash;                  /**< Pointer to driver's individual address hash table  */
-+    bool                        debugMode;
-+    uint8_t                     macId;
-+    uint32_t                    exceptions;
-+    struct memac_cfg            *p_MemacDriverParam;
-+} t_Memac;
-+
-+
-+/* Internal PHY access */
-+#define PHY_MDIO_ADDR               0
-+
-+/* Internal PHY Registers - SGMII */
-+#define PHY_SGMII_CR_PHY_RESET          0x8000
-+#define PHY_SGMII_CR_RESET_AN           0x0200
-+#define PHY_SGMII_CR_DEF_VAL            0x1140
-+#define PHY_SGMII_DEV_ABILITY_SGMII     0x4001
-+#define PHY_SGMII_DEV_ABILITY_1000X     0x01A0
-+#define PHY_SGMII_IF_SPEED_GIGABIT	0x0008
-+#define PHY_SGMII_IF_MODE_AN            0x0002
-+#define PHY_SGMII_IF_MODE_SGMII         0x0001
-+#define PHY_SGMII_IF_MODE_1000X         0x0000
-+
-+
-+#define MEMAC_TO_MII_OFFSET         0x030       /* Offset from the MEM map to the MDIO mem map */
-+
-+t_Error MEMAC_MII_WritePhyReg(t_Handle h_Memac, uint8_t phyAddr, uint8_t reg, uint16_t data);
-+t_Error MEMAC_MII_ReadPhyReg(t_Handle h_Memac,  uint8_t phyAddr, uint8_t reg, uint16_t *p_Data);
-+
-+
-+#endif /* __MEMAC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac_mii_acc.c
-@@ -0,0 +1,78 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+#include "fm_mac.h"
-+#include "memac.h"
-+#include "xx_ext.h"
-+
-+#include "fm_common.h"
-+#include "memac_mii_acc.h"
-+
-+
-+/*****************************************************************************/
-+t_Error MEMAC_MII_WritePhyReg(t_Handle  h_Memac,
-+                             uint8_t    phyAddr,
-+                             uint8_t    reg,
-+                             uint16_t   data)
-+{
-+    t_Memac                 *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Memac->p_MiiMemMap, E_INVALID_HANDLE);
-+
-+    return (t_Error)fman_memac_mii_write_phy_reg(p_Memac->p_MiiMemMap,
-+                                                 phyAddr,
-+                                                 reg,
-+                                                 data,
-+                                                 (enum enet_speed)ENET_SPEED_FROM_MODE(p_Memac->enetMode));
-+}
-+
-+/*****************************************************************************/
-+t_Error MEMAC_MII_ReadPhyReg(t_Handle h_Memac,
-+                            uint8_t   phyAddr,
-+                            uint8_t   reg,
-+                            uint16_t  *p_Data)
-+{
-+    t_Memac                 *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Memac->p_MiiMemMap, E_INVALID_HANDLE);
-+
-+    return fman_memac_mii_read_phy_reg(p_Memac->p_MiiMemMap,
-+                                       phyAddr,
-+                                       reg,
-+                                       p_Data,
-+                                       (enum enet_speed)ENET_SPEED_FROM_MODE(p_Memac->enetMode));
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac_mii_acc.h
-@@ -0,0 +1,73 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#ifndef __MEMAC_MII_ACC_H
-+#define __MEMAC_MII_ACC_H
-+
-+#include "std_ext.h"
-+
-+
-+/* MII Management Registers */
-+#define MDIO_CFG_CLK_DIV_MASK       0x0080ff80
-+#define MDIO_CFG_CLK_DIV_SHIFT      7
-+#define MDIO_CFG_HOLD_MASK          0x0000001c
-+#define MDIO_CFG_ENC45              0x00000040
-+#define MDIO_CFG_READ_ERR           0x00000002
-+#define MDIO_CFG_BSY                0x00000001
-+
-+#define MDIO_CTL_PHY_ADDR_SHIFT     5
-+#define MDIO_CTL_READ               0x00008000
-+
-+#define MDIO_DATA_BSY               0x80000000
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(push,1)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+/*----------------------------------------------------*/
-+/* MII Configuration Control Memory Map Registers     */
-+/*----------------------------------------------------*/
-+typedef struct t_MemacMiiAccessMemMap
-+{
-+    volatile uint32_t   mdio_cfg;       /* 0x030  */
-+    volatile uint32_t   mdio_ctrl;      /* 0x034  */
-+    volatile uint32_t   mdio_data;      /* 0x038  */
-+    volatile uint32_t   mdio_addr;      /* 0x03c  */
-+} t_MemacMiiAccessMemMap ;
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+
-+#endif /* __MEMAC_MII_ACC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/tgec.c
-@@ -0,0 +1,975 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          tgec.c
-+
-+ @Description   FM 10G MAC ...
-+*//***************************************************************************/
-+
-+#include "std_ext.h"
-+#include "string_ext.h"
-+#include "error_ext.h"
-+#include "xx_ext.h"
-+#include "endian_ext.h"
-+#include "debug_ext.h"
-+#include "crc_mac_addr_ext.h"
-+
-+#include "fm_common.h"
-+#include "fsl_fman_tgec.h"
-+#include "tgec.h"
-+
-+
-+/*****************************************************************************/
-+/*                      Internal routines                                    */
-+/*****************************************************************************/
-+
-+static t_Error CheckInitParameters(t_Tgec    *p_Tgec)
-+{
-+    if (ENET_SPEED_FROM_MODE(p_Tgec->enetMode) < e_ENET_SPEED_10000)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Ethernet 10G MAC driver only support 10G speed"));
-+#if (FM_MAX_NUM_OF_10G_MACS > 0)
-+    if (p_Tgec->macId >= FM_MAX_NUM_OF_10G_MACS)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("macId of 10G can not be greater than 0"));
-+#endif /* (FM_MAX_NUM_OF_10G_MACS > 0) */
-+
-+    if (p_Tgec->addr == 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Ethernet 10G MAC Must have a valid MAC Address"));
-+    if (!p_Tgec->f_Exception)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("uninitialized f_Exception"));
-+    if (!p_Tgec->f_Event)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("uninitialized f_Event"));
-+#ifdef FM_LEN_CHECK_ERRATA_FMAN_SW002
-+    if (!p_Tgec->p_TgecDriverParam->no_length_check_enable)
-+       RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("LengthCheck!"));
-+#endif /* FM_LEN_CHECK_ERRATA_FMAN_SW002 */
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static uint32_t GetMacAddrHashCode(uint64_t ethAddr)
-+{
-+    uint32_t crc;
-+
-+    /* CRC calculation */
-+    GET_MAC_ADDR_CRC(ethAddr, crc);
-+
-+    crc = GetMirror32(crc);
-+
-+    return crc;
-+}
-+
-+/* ......................................................................... */
-+
-+static void TgecErrException(t_Handle h_Tgec)
-+{
-+    t_Tgec              *p_Tgec = (t_Tgec *)h_Tgec;
-+    uint32_t            event;
-+    struct tgec_regs    *p_TgecMemMap = p_Tgec->p_MemMap;
-+
-+    /* do not handle MDIO events */
-+    event = fman_tgec_get_event(p_TgecMemMap, ~(TGEC_IMASK_MDIO_SCAN_EVENT | TGEC_IMASK_MDIO_CMD_CMPL));
-+    event &= fman_tgec_get_interrupt_mask(p_TgecMemMap);
-+
-+    fman_tgec_ack_event(p_TgecMemMap, event);
-+
-+    if (event & TGEC_IMASK_REM_FAULT)
-+        p_Tgec->f_Exception(p_Tgec->h_App, e_FM_MAC_EX_10G_REM_FAULT);
-+    if (event & TGEC_IMASK_LOC_FAULT)
-+        p_Tgec->f_Exception(p_Tgec->h_App, e_FM_MAC_EX_10G_LOC_FAULT);
-+    if (event & TGEC_IMASK_TX_ECC_ER)
-+        p_Tgec->f_Exception(p_Tgec->h_App, e_FM_MAC_EX_10G_1TX_ECC_ER);
-+    if (event & TGEC_IMASK_TX_FIFO_UNFL)
-+        p_Tgec->f_Exception(p_Tgec->h_App, e_FM_MAC_EX_10G_TX_FIFO_UNFL);
-+    if (event & TGEC_IMASK_TX_FIFO_OVFL)
-+        p_Tgec->f_Exception(p_Tgec->h_App, e_FM_MAC_EX_10G_TX_FIFO_OVFL);
-+    if (event & TGEC_IMASK_TX_ER)
-+        p_Tgec->f_Exception(p_Tgec->h_App, e_FM_MAC_EX_10G_TX_ER);
-+    if (event & TGEC_IMASK_RX_FIFO_OVFL)
-+        p_Tgec->f_Exception(p_Tgec->h_App, e_FM_MAC_EX_10G_RX_FIFO_OVFL);
-+    if (event & TGEC_IMASK_RX_ECC_ER)
-+        p_Tgec->f_Exception(p_Tgec->h_App, e_FM_MAC_EX_10G_RX_ECC_ER);
-+    if (event & TGEC_IMASK_RX_JAB_FRM)
-+        p_Tgec->f_Exception(p_Tgec->h_App, e_FM_MAC_EX_10G_RX_JAB_FRM);
-+    if (event & TGEC_IMASK_RX_OVRSZ_FRM)
-+        p_Tgec->f_Exception(p_Tgec->h_App, e_FM_MAC_EX_10G_RX_OVRSZ_FRM);
-+    if (event & TGEC_IMASK_RX_RUNT_FRM)
-+        p_Tgec->f_Exception(p_Tgec->h_App, e_FM_MAC_EX_10G_RX_RUNT_FRM);
-+    if (event & TGEC_IMASK_RX_FRAG_FRM)
-+        p_Tgec->f_Exception(p_Tgec->h_App, e_FM_MAC_EX_10G_RX_FRAG_FRM);
-+    if (event & TGEC_IMASK_RX_LEN_ER)
-+        p_Tgec->f_Exception(p_Tgec->h_App, e_FM_MAC_EX_10G_RX_LEN_ER);
-+    if (event & TGEC_IMASK_RX_CRC_ER)
-+        p_Tgec->f_Exception(p_Tgec->h_App, e_FM_MAC_EX_10G_RX_CRC_ER);
-+    if (event & TGEC_IMASK_RX_ALIGN_ER)
-+        p_Tgec->f_Exception(p_Tgec->h_App, e_FM_MAC_EX_10G_RX_ALIGN_ER);
-+}
-+
-+/* ......................................................................... */
-+
-+static void TgecException(t_Handle h_Tgec)
-+{
-+     t_Tgec             *p_Tgec = (t_Tgec *)h_Tgec;
-+     uint32_t           event;
-+     struct tgec_regs   *p_TgecMemMap = p_Tgec->p_MemMap;
-+
-+     /* handle only MDIO events */
-+     event = fman_tgec_get_event(p_TgecMemMap, (TGEC_IMASK_MDIO_SCAN_EVENT | TGEC_IMASK_MDIO_CMD_CMPL));
-+     event &= fman_tgec_get_interrupt_mask(p_TgecMemMap);
-+
-+     fman_tgec_ack_event(p_TgecMemMap, event);
-+
-+     if (event & TGEC_IMASK_MDIO_SCAN_EVENT)
-+         p_Tgec->f_Event(p_Tgec->h_App, e_FM_MAC_EX_10G_MDIO_SCAN_EVENTMDIO);
-+     if (event & TGEC_IMASK_MDIO_CMD_CMPL)
-+         p_Tgec->f_Event(p_Tgec->h_App, e_FM_MAC_EX_10G_MDIO_CMD_CMPL);
-+}
-+
-+/* ......................................................................... */
-+
-+static void FreeInitResources(t_Tgec *p_Tgec)
-+{
-+    if (p_Tgec->mdioIrq != NO_IRQ)
-+    {
-+        XX_DisableIntr(p_Tgec->mdioIrq);
-+        XX_FreeIntr(p_Tgec->mdioIrq);
-+    }
-+
-+    FmUnregisterIntr(p_Tgec->fmMacControllerDriver.h_Fm, e_FM_MOD_10G_MAC, p_Tgec->macId, e_FM_INTR_TYPE_ERR);
-+
-+    /* release the driver's group hash table */
-+    FreeHashTable(p_Tgec->p_MulticastAddrHash);
-+    p_Tgec->p_MulticastAddrHash =   NULL;
-+
-+    /* release the driver's individual hash table */
-+    FreeHashTable(p_Tgec->p_UnicastAddrHash);
-+    p_Tgec->p_UnicastAddrHash =     NULL;
-+}
-+
-+
-+/*****************************************************************************/
-+/*                     10G MAC API routines                                  */
-+/*****************************************************************************/
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecEnable(t_Handle h_Tgec,  e_CommMode mode)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    fman_tgec_enable(p_Tgec->p_MemMap, (mode & e_COMM_MODE_RX), (mode & e_COMM_MODE_TX));
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecDisable (t_Handle h_Tgec, e_CommMode mode)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    fman_tgec_disable(p_Tgec->p_MemMap, (mode & e_COMM_MODE_RX), (mode & e_COMM_MODE_TX));
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecSetPromiscuous(t_Handle h_Tgec, bool newVal)
-+{
-+    t_Tgec       *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    fman_tgec_set_promiscuous(p_Tgec->p_MemMap, newVal);
-+
-+    return E_OK;
-+}
-+
-+
-+/*****************************************************************************/
-+/*                      Tgec Configs modification functions                 */
-+/*****************************************************************************/
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecConfigLoopback(t_Handle h_Tgec, bool newVal)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    p_Tgec->p_TgecDriverParam->loopback_enable = newVal;
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecConfigWan(t_Handle h_Tgec, bool newVal)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    p_Tgec->p_TgecDriverParam->wan_mode_enable = newVal;
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecConfigMaxFrameLength(t_Handle h_Tgec, uint16_t newVal)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    p_Tgec->p_TgecDriverParam->max_frame_length = newVal;
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecConfigLengthCheck(t_Handle h_Tgec, bool newVal)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    UNUSED(newVal);
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    p_Tgec->p_TgecDriverParam->no_length_check_enable = !newVal;
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecConfigException(t_Handle h_Tgec, e_FmMacExceptions exception, bool enable)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+    uint32_t    bitMask = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    GET_EXCEPTION_FLAG(bitMask, exception);
-+    if (bitMask)
-+    {
-+        if (enable)
-+            p_Tgec->exceptions |= bitMask;
-+        else
-+            p_Tgec->exceptions &= ~bitMask;
-+    }
-+    else
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Undefined exception"));
-+
-+    return E_OK;
-+}
-+
-+#ifdef FM_TX_ECC_FRMS_ERRATA_10GMAC_A004
-+/* ......................................................................... */
-+
-+static t_Error TgecConfigSkipFman11Workaround(t_Handle h_Tgec)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    p_Tgec->p_TgecDriverParam->skip_fman11_workaround = TRUE;
-+
-+    return E_OK;
-+}
-+#endif /* FM_TX_ECC_FRMS_ERRATA_10GMAC_A004 */
-+
-+
-+/*****************************************************************************/
-+/*                      Tgec Run Time API functions                         */
-+/*****************************************************************************/
-+
-+/* ......................................................................... */
-+/* backward compatibility. will be removed in the future. */
-+static t_Error TgecTxMacPause(t_Handle h_Tgec, uint16_t pauseTime)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+    fman_tgec_set_tx_pause_frames(p_Tgec->p_MemMap, pauseTime);
-+
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecSetTxPauseFrames(t_Handle h_Tgec,
-+                                    uint8_t  priority,
-+                                    uint16_t pauseTime,
-+                                    uint16_t threshTime)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    UNUSED(priority); UNUSED(threshTime);
-+
-+    fman_tgec_set_tx_pause_frames(p_Tgec->p_MemMap, pauseTime);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecRxIgnoreMacPause(t_Handle h_Tgec, bool en)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    fman_tgec_set_rx_ignore_pause_frames(p_Tgec->p_MemMap, en);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecGetStatistics(t_Handle h_Tgec, t_FmMacStatistics *p_Statistics)
-+{
-+    t_Tgec              *p_Tgec = (t_Tgec *)h_Tgec;
-+    struct tgec_regs    *p_TgecMemMap;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_Statistics, E_NULL_POINTER);
-+
-+    p_TgecMemMap = p_Tgec->p_MemMap;
-+
-+    p_Statistics->eStatPkts64           = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_R64);
-+    p_Statistics->eStatPkts65to127      = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_R127);
-+    p_Statistics->eStatPkts128to255     = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_R255);
-+    p_Statistics->eStatPkts256to511     = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_R511);
-+    p_Statistics->eStatPkts512to1023    = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_R1023);
-+    p_Statistics->eStatPkts1024to1518   = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_R1518);
-+    p_Statistics->eStatPkts1519to1522   = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_R1519X);
-+/* */
-+    p_Statistics->eStatFragments        = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_TRFRG);
-+    p_Statistics->eStatJabbers          = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_TRJBR);
-+
-+    p_Statistics->eStatsDropEvents      = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_RDRP);
-+    p_Statistics->eStatCRCAlignErrors   = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_RALN);
-+
-+    p_Statistics->eStatUndersizePkts    = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_TRUND);
-+    p_Statistics->eStatOversizePkts     = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_TROVR);
-+/* Pause */
-+    p_Statistics->reStatPause           = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_RXPF);
-+    p_Statistics->teStatPause           = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_TXPF);
-+
-+/* MIB II */
-+    p_Statistics->ifInOctets            = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_ROCT);
-+    p_Statistics->ifInUcastPkts         = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_RUCA);
-+    p_Statistics->ifInMcastPkts         = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_RMCA);
-+    p_Statistics->ifInBcastPkts         = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_RBCA);
-+    p_Statistics->ifInPkts              = p_Statistics->ifInUcastPkts
-+                                        + p_Statistics->ifInMcastPkts
-+                                        + p_Statistics->ifInBcastPkts;
-+    p_Statistics->ifInDiscards          = 0;
-+    p_Statistics->ifInErrors            = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_RERR);
-+
-+    p_Statistics->ifOutOctets           = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_TOCT);
-+    p_Statistics->ifOutUcastPkts        = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_TUCA);
-+    p_Statistics->ifOutMcastPkts        = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_TMCA);
-+    p_Statistics->ifOutBcastPkts        = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_TBCA);
-+    p_Statistics->ifOutPkts             = p_Statistics->ifOutUcastPkts
-+                                        + p_Statistics->ifOutMcastPkts
-+                                        + p_Statistics->ifOutBcastPkts;
-+    p_Statistics->ifOutDiscards         = 0;
-+    p_Statistics->ifOutErrors           = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_TERR);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecEnable1588TimeStamp(t_Handle h_Tgec)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    fman_tgec_enable_1588_time_stamp(p_Tgec->p_MemMap, 1);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecDisable1588TimeStamp(t_Handle h_Tgec)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    fman_tgec_enable_1588_time_stamp(p_Tgec->p_MemMap, 0);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecModifyMacAddress (t_Handle h_Tgec, t_EnetAddr *p_EnetAddr)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    p_Tgec->addr = ENET_ADDR_TO_UINT64(*p_EnetAddr);
-+    fman_tgec_set_mac_address(p_Tgec->p_MemMap, (uint8_t *)(*p_EnetAddr));
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecResetCounters (t_Handle h_Tgec)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    fman_tgec_reset_stat(p_Tgec->p_MemMap);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecAddExactMatchMacAddress(t_Handle h_Tgec, t_EnetAddr *p_EthAddr)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *) h_Tgec;
-+    uint64_t    ethAddr;
-+    uint8_t     paddrNum;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    ethAddr = ENET_ADDR_TO_UINT64(*p_EthAddr);
-+
-+    if (ethAddr & GROUP_ADDRESS)
-+        /* Multicast address has no effect in PADDR */
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Multicast address"));
-+
-+    /* Make sure no PADDR contains this address */
-+    for (paddrNum = 0; paddrNum < TGEC_NUM_OF_PADDRS; paddrNum++)
-+        if (p_Tgec->indAddrRegUsed[paddrNum])
-+            if (p_Tgec->paddr[paddrNum] == ethAddr)
-+                RETURN_ERROR(MAJOR, E_ALREADY_EXISTS, NO_MSG);
-+
-+    /* Find first unused PADDR */
-+    for (paddrNum = 0; paddrNum < TGEC_NUM_OF_PADDRS; paddrNum++)
-+    {
-+        if (!(p_Tgec->indAddrRegUsed[paddrNum]))
-+        {
-+            /* mark this PADDR as used */
-+            p_Tgec->indAddrRegUsed[paddrNum] = TRUE;
-+            /* store address */
-+            p_Tgec->paddr[paddrNum] = ethAddr;
-+
-+            /* put in hardware */
-+            fman_tgec_add_addr_in_paddr(p_Tgec->p_MemMap, (uint8_t*)(*p_EthAddr)/* , paddrNum */);
-+            p_Tgec->numOfIndAddrInRegs++;
-+
-+            return E_OK;
-+        }
-+    }
-+
-+    /* No free PADDR */
-+    RETURN_ERROR(MAJOR, E_FULL, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecDelExactMatchMacAddress(t_Handle h_Tgec, t_EnetAddr *p_EthAddr)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *) h_Tgec;
-+    uint64_t    ethAddr;
-+    uint8_t     paddrNum;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    ethAddr = ENET_ADDR_TO_UINT64(*p_EthAddr);
-+
-+    /* Find used PADDR containing this address */
-+    for (paddrNum = 0; paddrNum < TGEC_NUM_OF_PADDRS; paddrNum++)
-+    {
-+        if ((p_Tgec->indAddrRegUsed[paddrNum]) &&
-+            (p_Tgec->paddr[paddrNum] == ethAddr))
-+        {
-+            /* mark this PADDR as not used */
-+            p_Tgec->indAddrRegUsed[paddrNum] = FALSE;
-+            /* clear in hardware */
-+            fman_tgec_clear_addr_in_paddr(p_Tgec->p_MemMap /*, paddrNum */);
-+            p_Tgec->numOfIndAddrInRegs--;
-+
-+            return E_OK;
-+        }
-+    }
-+
-+    RETURN_ERROR(MAJOR, E_NOT_FOUND, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecAddHashMacAddress(t_Handle h_Tgec, t_EnetAddr *p_EthAddr)
-+{
-+    t_Tgec          *p_Tgec = (t_Tgec *)h_Tgec;
-+    t_EthHashEntry  *p_HashEntry;
-+    uint32_t        crc;
-+    uint32_t        hash;
-+    uint64_t        ethAddr;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    ethAddr = ENET_ADDR_TO_UINT64(*p_EthAddr);
-+
-+    if (!(ethAddr & GROUP_ADDRESS))
-+        /* Unicast addresses not supported in hash */
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("Unicast Address"));
-+
-+    /* CRC calculation */
-+    crc = GetMacAddrHashCode(ethAddr);
-+
-+    hash = (crc >> TGEC_HASH_MCAST_SHIFT) & TGEC_HASH_ADR_MSK;        /* Take 9 MSB bits */
-+
-+    /* Create element to be added to the driver hash table */
-+    p_HashEntry = (t_EthHashEntry *)XX_Malloc(sizeof(t_EthHashEntry));
-+    p_HashEntry->addr = ethAddr;
-+    INIT_LIST(&p_HashEntry->node);
-+
-+    LIST_AddToTail(&(p_HashEntry->node), &(p_Tgec->p_MulticastAddrHash->p_Lsts[hash]));
-+    fman_tgec_set_hash_table(p_Tgec->p_MemMap, (hash | TGEC_HASH_MCAST_EN));
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecDelHashMacAddress(t_Handle h_Tgec, t_EnetAddr *p_EthAddr)
-+{
-+    t_Tgec           *p_Tgec = (t_Tgec *)h_Tgec;
-+    t_EthHashEntry   *p_HashEntry = NULL;
-+    t_List           *p_Pos;
-+    uint32_t         crc;
-+    uint32_t         hash;
-+    uint64_t         ethAddr;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    ethAddr = ((*(uint64_t *)p_EthAddr) >> 16);
-+
-+    /* CRC calculation */
-+    crc = GetMacAddrHashCode(ethAddr);
-+
-+    hash = (crc >> TGEC_HASH_MCAST_SHIFT) & TGEC_HASH_ADR_MSK;        /* Take 9 MSB bits */
-+
-+    LIST_FOR_EACH(p_Pos, &(p_Tgec->p_MulticastAddrHash->p_Lsts[hash]))
-+    {
-+        p_HashEntry = ETH_HASH_ENTRY_OBJ(p_Pos);
-+        if (p_HashEntry->addr == ethAddr)
-+        {
-+            LIST_DelAndInit(&p_HashEntry->node);
-+            XX_Free(p_HashEntry);
-+            break;
-+        }
-+    }
-+    if (LIST_IsEmpty(&p_Tgec->p_MulticastAddrHash->p_Lsts[hash]))
-+        fman_tgec_set_hash_table(p_Tgec->p_MemMap, (hash & ~TGEC_HASH_MCAST_EN));
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecGetId(t_Handle h_Tgec, uint32_t *macId)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    UNUSED(p_Tgec);
-+    UNUSED(macId);
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("TgecGetId Not Supported"));
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecGetVersion(t_Handle h_Tgec, uint32_t *macVersion)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    *macVersion = fman_tgec_get_revision(p_Tgec->p_MemMap);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecSetExcpetion(t_Handle h_Tgec, e_FmMacExceptions exception, bool enable)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+    uint32_t    bitMask = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+
-+    GET_EXCEPTION_FLAG(bitMask, exception);
-+    if (bitMask)
-+    {
-+        if (enable)
-+            p_Tgec->exceptions |= bitMask;
-+        else
-+            p_Tgec->exceptions &= ~bitMask;
-+   }
-+    else
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Undefined exception"));
-+
-+    if (enable)
-+        fman_tgec_enable_interrupt(p_Tgec->p_MemMap, bitMask);
-+    else
-+        fman_tgec_disable_interrupt(p_Tgec->p_MemMap, bitMask);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static uint16_t TgecGetMaxFrameLength(t_Handle h_Tgec)
-+{
-+    t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_Tgec, E_INVALID_HANDLE, 0);
-+    SANITY_CHECK_RETURN_VALUE(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE, 0);
-+
-+    return fman_tgec_get_max_frame_len(p_Tgec->p_MemMap);
-+}
-+
-+/* ......................................................................... */
-+
-+#ifdef FM_TX_ECC_FRMS_ERRATA_10GMAC_A004
-+static t_Error TgecTxEccWorkaround(t_Tgec *p_Tgec)
-+{
-+    t_Error err;
-+
-+#if defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)
-+    XX_Print("Applying 10G TX ECC workaround (10GMAC-A004) ... ");
-+#endif /* (DEBUG_ERRORS > 0) */
-+    /* enable and set promiscuous */
-+    fman_tgec_enable(p_Tgec->p_MemMap, TRUE, TRUE);
-+    fman_tgec_set_promiscuous(p_Tgec->p_MemMap, TRUE);
-+    err = Fm10GTxEccWorkaround(p_Tgec->fmMacControllerDriver.h_Fm, p_Tgec->macId);
-+    /* disable */
-+    fman_tgec_set_promiscuous(p_Tgec->p_MemMap, FALSE);
-+    fman_tgec_enable(p_Tgec->p_MemMap, FALSE, FALSE);
-+    fman_tgec_reset_stat(p_Tgec->p_MemMap);
-+    fman_tgec_ack_event(p_Tgec->p_MemMap, 0xffffffff);
-+#if defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)
-+    if (err)
-+        XX_Print("FAILED!\n");
-+    else
-+        XX_Print("done.\n");
-+#endif /* (DEBUG_ERRORS > 0) */
-+
-+    return err;
-+}
-+#endif /* FM_TX_ECC_FRMS_ERRATA_10GMAC_A004 */
-+
-+/*****************************************************************************/
-+/*                      FM Init & Free API                                   */
-+/*****************************************************************************/
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecInit(t_Handle h_Tgec)
-+{
-+    t_Tgec                  *p_Tgec = (t_Tgec *)h_Tgec;
-+    struct tgec_cfg         *p_TgecDriverParam;
-+    t_EnetAddr              ethAddr;
-+    t_Error                 err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec->fmMacControllerDriver.h_Fm, E_INVALID_HANDLE);
-+
-+    FM_GetRevision(p_Tgec->fmMacControllerDriver.h_Fm, &p_Tgec->fmMacControllerDriver.fmRevInfo);
-+    CHECK_INIT_PARAMETERS(p_Tgec, CheckInitParameters);
-+
-+    p_TgecDriverParam = p_Tgec->p_TgecDriverParam;
-+
-+    MAKE_ENET_ADDR_FROM_UINT64(p_Tgec->addr, ethAddr);
-+    fman_tgec_set_mac_address(p_Tgec->p_MemMap, (uint8_t *)ethAddr);
-+
-+    /* interrupts */
-+#ifdef FM_10G_REM_N_LCL_FLT_EX_10GMAC_ERRATA_SW005
-+    {
-+        if (p_Tgec->fmMacControllerDriver.fmRevInfo.majorRev <=2)
-+            p_Tgec->exceptions &= ~(TGEC_IMASK_REM_FAULT | TGEC_IMASK_LOC_FAULT);
-+    }
-+#endif /* FM_10G_REM_N_LCL_FLT_EX_10GMAC_ERRATA_SW005 */
-+
-+#ifdef FM_TX_ECC_FRMS_ERRATA_10GMAC_A004
-+    if (!p_Tgec->p_TgecDriverParam->skip_fman11_workaround &&
-+        ((err = TgecTxEccWorkaround(p_Tgec)) != E_OK))
-+    {
-+        FreeInitResources(p_Tgec);
-+        REPORT_ERROR(MINOR, err, ("TgecTxEccWorkaround FAILED"));
-+    }
-+#endif /* FM_TX_ECC_FRMS_ERRATA_10GMAC_A004 */
-+
-+    err = fman_tgec_init(p_Tgec->p_MemMap, p_TgecDriverParam, p_Tgec->exceptions);
-+    if (err)
-+    {
-+        FreeInitResources(p_Tgec);
-+        RETURN_ERROR(MAJOR, err, ("This TGEC version does not support the required i/f mode"));
-+    }
-+
-+    /* Max Frame Length */
-+    err = FmSetMacMaxFrame(p_Tgec->fmMacControllerDriver.h_Fm,
-+                           e_FM_MAC_10G,
-+                           p_Tgec->fmMacControllerDriver.macId,
-+                           p_TgecDriverParam->max_frame_length);
-+    if (err != E_OK)
-+    {
-+        FreeInitResources(p_Tgec);
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+/* we consider having no IPC a non crasher... */
-+
-+#ifdef FM_TX_FIFO_CORRUPTION_ERRATA_10GMAC_A007
-+    if (p_Tgec->fmMacControllerDriver.fmRevInfo.majorRev == 2)
-+        fman_tgec_set_erratum_tx_fifo_corruption_10gmac_a007(p_Tgec->p_MemMap);
-+#endif /* FM_TX_FIFO_CORRUPTION_ERRATA_10GMAC_A007 */
-+
-+    p_Tgec->p_MulticastAddrHash = AllocHashTable(HASH_TABLE_SIZE);
-+    if (!p_Tgec->p_MulticastAddrHash)
-+    {
-+        FreeInitResources(p_Tgec);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("allocation hash table is FAILED"));
-+    }
-+
-+    p_Tgec->p_UnicastAddrHash = AllocHashTable(HASH_TABLE_SIZE);
-+    if (!p_Tgec->p_UnicastAddrHash)
-+    {
-+        FreeInitResources(p_Tgec);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("allocation hash table is FAILED"));
-+    }
-+
-+    FmRegisterIntr(p_Tgec->fmMacControllerDriver.h_Fm,
-+                   e_FM_MOD_10G_MAC,
-+                   p_Tgec->macId,
-+                   e_FM_INTR_TYPE_ERR,
-+                   TgecErrException,
-+                   p_Tgec);
-+    if (p_Tgec->mdioIrq != NO_IRQ)
-+    {
-+        XX_SetIntr(p_Tgec->mdioIrq, TgecException, p_Tgec);
-+        XX_EnableIntr(p_Tgec->mdioIrq);
-+    }
-+
-+    XX_Free(p_TgecDriverParam);
-+    p_Tgec->p_TgecDriverParam = NULL;
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static t_Error TgecFree(t_Handle h_Tgec)
-+{
-+    t_Tgec       *p_Tgec = (t_Tgec *)h_Tgec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+
-+    if (p_Tgec->p_TgecDriverParam)
-+    {
-+        /* Called after config */
-+        XX_Free(p_Tgec->p_TgecDriverParam);
-+        p_Tgec->p_TgecDriverParam = NULL;
-+    }
-+    else
-+        /* Called after init */
-+        FreeInitResources(p_Tgec);
-+
-+    XX_Free(p_Tgec);
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
-+static void InitFmMacControllerDriver(t_FmMacControllerDriver *p_FmMacControllerDriver)
-+{
-+    p_FmMacControllerDriver->f_FM_MAC_Init                      = TgecInit;
-+    p_FmMacControllerDriver->f_FM_MAC_Free                      = TgecFree;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_SetStatistics             = NULL;
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigLoopback            = TgecConfigLoopback;
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigMaxFrameLength      = TgecConfigMaxFrameLength;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigWan                 = TgecConfigWan;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigPadAndCrc           = NULL; /* TGEC always works with pad+crc */
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigHalfDuplex          = NULL; /* half-duplex is not supported in xgec */
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigLengthCheck         = TgecConfigLengthCheck;
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigException           = TgecConfigException;
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigResetOnInit         = NULL;
-+
-+#ifdef FM_TX_ECC_FRMS_ERRATA_10GMAC_A004
-+    p_FmMacControllerDriver->f_FM_MAC_ConfigSkipFman11Workaround= TgecConfigSkipFman11Workaround;
-+#endif /* FM_TX_ECC_FRMS_ERRATA_10GMAC_A004 */
-+
-+    p_FmMacControllerDriver->f_FM_MAC_SetException              = TgecSetExcpetion;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_Enable1588TimeStamp       = TgecEnable1588TimeStamp;
-+    p_FmMacControllerDriver->f_FM_MAC_Disable1588TimeStamp      = TgecDisable1588TimeStamp;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_SetPromiscuous            = TgecSetPromiscuous;
-+    p_FmMacControllerDriver->f_FM_MAC_AdjustLink                = NULL;
-+    p_FmMacControllerDriver->f_FM_MAC_SetWakeOnLan              = NULL;
-+    p_FmMacControllerDriver->f_FM_MAC_RestartAutoneg            = NULL;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_Enable                    = TgecEnable;
-+    p_FmMacControllerDriver->f_FM_MAC_Disable                   = TgecDisable;
-+    p_FmMacControllerDriver->f_FM_MAC_Resume                    = NULL;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_SetTxAutoPauseFrames      = TgecTxMacPause;
-+    p_FmMacControllerDriver->f_FM_MAC_SetTxPauseFrames          = TgecSetTxPauseFrames;
-+    p_FmMacControllerDriver->f_FM_MAC_SetRxIgnorePauseFrames    = TgecRxIgnoreMacPause;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_ResetCounters             = TgecResetCounters;
-+    p_FmMacControllerDriver->f_FM_MAC_GetStatistics             = TgecGetStatistics;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_ModifyMacAddr             = TgecModifyMacAddress;
-+    p_FmMacControllerDriver->f_FM_MAC_AddHashMacAddr            = TgecAddHashMacAddress;
-+    p_FmMacControllerDriver->f_FM_MAC_RemoveHashMacAddr         = TgecDelHashMacAddress;
-+    p_FmMacControllerDriver->f_FM_MAC_AddExactMatchMacAddr      = TgecAddExactMatchMacAddress;
-+    p_FmMacControllerDriver->f_FM_MAC_RemovelExactMatchMacAddr  = TgecDelExactMatchMacAddress;
-+    p_FmMacControllerDriver->f_FM_MAC_GetId                     = TgecGetId;
-+    p_FmMacControllerDriver->f_FM_MAC_GetVersion                = TgecGetVersion;
-+    p_FmMacControllerDriver->f_FM_MAC_GetMaxFrameLength         = TgecGetMaxFrameLength;
-+
-+    p_FmMacControllerDriver->f_FM_MAC_MII_WritePhyReg           = TGEC_MII_WritePhyReg;
-+    p_FmMacControllerDriver->f_FM_MAC_MII_ReadPhyReg            = TGEC_MII_ReadPhyReg;
-+}
-+
-+
-+/*****************************************************************************/
-+/*                      Tgec Config  Main Entry                             */
-+/*****************************************************************************/
-+
-+/* ......................................................................... */
-+
-+t_Handle TGEC_Config(t_FmMacParams *p_FmMacParam)
-+{
-+    t_Tgec              *p_Tgec;
-+    struct tgec_cfg     *p_TgecDriverParam;
-+    uintptr_t           baseAddr;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmMacParam, E_NULL_POINTER, NULL);
-+
-+    baseAddr = p_FmMacParam->baseAddr;
-+    /* allocate memory for the UCC GETH data structure. */
-+    p_Tgec = (t_Tgec *)XX_Malloc(sizeof(t_Tgec));
-+    if (!p_Tgec)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("10G MAC driver structure"));
-+        return NULL;
-+    }
-+    memset(p_Tgec, 0, sizeof(t_Tgec));
-+    InitFmMacControllerDriver(&p_Tgec->fmMacControllerDriver);
-+
-+    /* allocate memory for the 10G MAC driver parameters data structure. */
-+    p_TgecDriverParam = (struct tgec_cfg *) XX_Malloc(sizeof(struct tgec_cfg));
-+    if (!p_TgecDriverParam)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("10G MAC driver parameters"));
-+        XX_Free(p_Tgec);
-+        return NULL;
-+    }
-+    memset(p_TgecDriverParam, 0, sizeof(struct tgec_cfg));
-+
-+    /* Plant parameter structure pointer */
-+    p_Tgec->p_TgecDriverParam = p_TgecDriverParam;
-+
-+    fman_tgec_defconfig(p_TgecDriverParam);
-+
-+    p_Tgec->p_MemMap        = (struct tgec_regs *)UINT_TO_PTR(baseAddr);
-+    p_Tgec->p_MiiMemMap     = (t_TgecMiiAccessMemMap *)UINT_TO_PTR(baseAddr + TGEC_TO_MII_OFFSET);
-+    p_Tgec->addr            = ENET_ADDR_TO_UINT64(p_FmMacParam->addr);
-+    p_Tgec->enetMode        = p_FmMacParam->enetMode;
-+    p_Tgec->macId           = p_FmMacParam->macId;
-+    p_Tgec->exceptions      = DEFAULT_exceptions;
-+    p_Tgec->mdioIrq         = p_FmMacParam->mdioIrq;
-+    p_Tgec->f_Exception     = p_FmMacParam->f_Exception;
-+    p_Tgec->f_Event         = p_FmMacParam->f_Event;
-+    p_Tgec->h_App           = p_FmMacParam->h_App;
-+
-+    return p_Tgec;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/tgec.h
-@@ -0,0 +1,151 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          tgec.h
-+
-+ @Description   FM 10G MAC ...
-+*//***************************************************************************/
-+#ifndef __TGEC_H
-+#define __TGEC_H
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "list_ext.h"
-+#include "enet_ext.h"
-+
-+#include "tgec_mii_acc.h"
-+#include "fm_mac.h"
-+
-+
-+#define DEFAULT_exceptions                        \
-+    ((uint32_t)(TGEC_IMASK_MDIO_SCAN_EVENT     |  \
-+                TGEC_IMASK_REM_FAULT           |  \
-+                TGEC_IMASK_LOC_FAULT           |  \
-+                TGEC_IMASK_TX_ECC_ER           |  \
-+                TGEC_IMASK_TX_FIFO_UNFL        |  \
-+                TGEC_IMASK_TX_FIFO_OVFL        |  \
-+                TGEC_IMASK_TX_ER               |  \
-+                TGEC_IMASK_RX_FIFO_OVFL        |  \
-+                TGEC_IMASK_RX_ECC_ER           |  \
-+                TGEC_IMASK_RX_JAB_FRM          |  \
-+                TGEC_IMASK_RX_OVRSZ_FRM        |  \
-+                TGEC_IMASK_RX_RUNT_FRM         |  \
-+                TGEC_IMASK_RX_FRAG_FRM         |  \
-+                TGEC_IMASK_RX_CRC_ER           |  \
-+                TGEC_IMASK_RX_ALIGN_ER))
-+
-+#define GET_EXCEPTION_FLAG(bitMask, exception)      switch (exception){ \
-+    case e_FM_MAC_EX_10G_MDIO_SCAN_EVENTMDIO:                           \
-+        bitMask = TGEC_IMASK_MDIO_SCAN_EVENT    ; break;                \
-+    case e_FM_MAC_EX_10G_MDIO_CMD_CMPL:                                 \
-+        bitMask = TGEC_IMASK_MDIO_CMD_CMPL      ; break;                \
-+    case e_FM_MAC_EX_10G_REM_FAULT:                                     \
-+        bitMask = TGEC_IMASK_REM_FAULT          ; break;                \
-+    case e_FM_MAC_EX_10G_LOC_FAULT:                                     \
-+        bitMask = TGEC_IMASK_LOC_FAULT          ; break;                \
-+    case e_FM_MAC_EX_10G_1TX_ECC_ER:                                    \
-+        bitMask = TGEC_IMASK_TX_ECC_ER         ; break;                 \
-+    case e_FM_MAC_EX_10G_TX_FIFO_UNFL:                                  \
-+        bitMask = TGEC_IMASK_TX_FIFO_UNFL       ; break;                \
-+    case e_FM_MAC_EX_10G_TX_FIFO_OVFL:                                  \
-+        bitMask = TGEC_IMASK_TX_FIFO_OVFL       ; break;                \
-+    case e_FM_MAC_EX_10G_TX_ER:                                         \
-+        bitMask = TGEC_IMASK_TX_ER              ; break;                \
-+    case e_FM_MAC_EX_10G_RX_FIFO_OVFL:                                  \
-+        bitMask = TGEC_IMASK_RX_FIFO_OVFL       ; break;                \
-+    case e_FM_MAC_EX_10G_RX_ECC_ER:                                     \
-+        bitMask = TGEC_IMASK_RX_ECC_ER          ; break;                \
-+    case e_FM_MAC_EX_10G_RX_JAB_FRM:                                    \
-+        bitMask = TGEC_IMASK_RX_JAB_FRM         ; break;                \
-+    case e_FM_MAC_EX_10G_RX_OVRSZ_FRM:                                  \
-+        bitMask = TGEC_IMASK_RX_OVRSZ_FRM       ; break;                \
-+    case e_FM_MAC_EX_10G_RX_RUNT_FRM:                                   \
-+        bitMask = TGEC_IMASK_RX_RUNT_FRM        ; break;                \
-+    case e_FM_MAC_EX_10G_RX_FRAG_FRM:                                   \
-+        bitMask = TGEC_IMASK_RX_FRAG_FRM        ; break;                \
-+    case e_FM_MAC_EX_10G_RX_LEN_ER:                                     \
-+        bitMask = TGEC_IMASK_RX_LEN_ER          ; break;                \
-+    case e_FM_MAC_EX_10G_RX_CRC_ER:                                     \
-+        bitMask = TGEC_IMASK_RX_CRC_ER          ; break;                \
-+    case e_FM_MAC_EX_10G_RX_ALIGN_ER:                                   \
-+        bitMask = TGEC_IMASK_RX_ALIGN_ER        ; break;                \
-+    default: bitMask = 0;break;}
-+
-+#define MAX_PACKET_ALIGNMENT        31
-+#define MAX_INTER_PACKET_GAP        0x7f
-+#define MAX_INTER_PALTERNATE_BEB    0x0f
-+#define MAX_RETRANSMISSION          0x0f
-+#define MAX_COLLISION_WINDOW        0x03ff
-+
-+#define TGEC_NUM_OF_PADDRS          1                   /* number of pattern match registers (entries) */
-+
-+#define GROUP_ADDRESS               0x0000010000000000LL /* Group address bit indication */
-+
-+#define HASH_TABLE_SIZE             512                 /* Hash table size (= 32 bits * 8 regs) */
-+
-+#define TGEC_TO_MII_OFFSET          0x1030              /* Offset from the MEM map to the MDIO mem map */
-+
-+/* 10-gigabit Ethernet MAC Controller ID (10GEC_ID) */
-+#define TGEC_ID_ID                  0xffff0000
-+#define TGEC_ID_MAC_VERSION         0x0000FF00
-+#define TGEC_ID_MAC_REV             0x000000ff
-+
-+
-+typedef struct {
-+    t_FmMacControllerDriver     fmMacControllerDriver;              /**< Upper Mac control block */
-+    t_Handle                    h_App;                              /**< Handle to the upper layer application  */
-+    struct tgec_regs            *p_MemMap;                          /**< pointer to 10G memory mapped registers. */
-+    t_TgecMiiAccessMemMap       *p_MiiMemMap;                       /**< pointer to MII memory mapped registers.          */
-+    uint64_t                    addr;                               /**< MAC address of device; */
-+    e_EnetMode                  enetMode;                           /**< Ethernet physical interface  */
-+    t_FmMacExceptionCallback    *f_Exception;
-+    int                         mdioIrq;
-+    t_FmMacExceptionCallback    *f_Event;
-+    bool                        indAddrRegUsed[TGEC_NUM_OF_PADDRS]; /**< Whether a particular individual address recognition register is being used */
-+    uint64_t                    paddr[TGEC_NUM_OF_PADDRS];          /**< MAC address for particular individual address recognition register */
-+    uint8_t                     numOfIndAddrInRegs;                 /**< Number of individual addresses in registers for this station. */
-+    t_EthHash                   *p_MulticastAddrHash;               /**< pointer to driver's global address hash table  */
-+    t_EthHash                   *p_UnicastAddrHash;                 /**< pointer to driver's individual address hash table  */
-+    bool                        debugMode;
-+    uint8_t                     macId;
-+    uint32_t                    exceptions;
-+    struct tgec_cfg             *p_TgecDriverParam;
-+} t_Tgec;
-+
-+
-+t_Error TGEC_MII_WritePhyReg(t_Handle h_Tgec, uint8_t phyAddr, uint8_t reg, uint16_t data);
-+t_Error TGEC_MII_ReadPhyReg(t_Handle h_Tgec,  uint8_t phyAddr, uint8_t reg, uint16_t *p_Data);
-+
-+
-+#endif /* __TGEC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/tgec_mii_acc.c
-@@ -0,0 +1,139 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+#include "fm_mac.h"
-+#include "tgec.h"
-+#include "xx_ext.h"
-+
-+#include "fm_common.h"
-+
-+
-+/*****************************************************************************/
-+t_Error TGEC_MII_WritePhyReg(t_Handle   h_Tgec,
-+                             uint8_t    phyAddr,
-+                             uint8_t    reg,
-+                             uint16_t   data)
-+{
-+    t_Tgec                  *p_Tgec = (t_Tgec *)h_Tgec;
-+    t_TgecMiiAccessMemMap   *p_MiiAccess;
-+    uint32_t                cfgStatusReg;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec->p_MiiMemMap, E_INVALID_HANDLE);
-+
-+    p_MiiAccess = p_Tgec->p_MiiMemMap;
-+
-+    /* Configure MII */
-+    cfgStatusReg  = GET_UINT32(p_MiiAccess->mdio_cfg_status);
-+    cfgStatusReg &= ~MIIMCOM_DIV_MASK;
-+     /* (one half of fm clock => 2.5Mhz) */
-+    cfgStatusReg |=((((p_Tgec->fmMacControllerDriver.clkFreq*10)/2)/25) << MIIMCOM_DIV_SHIFT);
-+    WRITE_UINT32(p_MiiAccess->mdio_cfg_status, cfgStatusReg);
-+
-+    while ((GET_UINT32(p_MiiAccess->mdio_cfg_status)) & MIIMIND_BUSY)
-+        XX_UDelay (1);
-+
-+    WRITE_UINT32(p_MiiAccess->mdio_command, phyAddr);
-+
-+    WRITE_UINT32(p_MiiAccess->mdio_regaddr, reg);
-+
-+    CORE_MemoryBarrier();
-+
-+    while ((GET_UINT32(p_MiiAccess->mdio_cfg_status)) & MIIMIND_BUSY)
-+        XX_UDelay (1);
-+
-+    WRITE_UINT32(p_MiiAccess->mdio_data, data);
-+
-+    CORE_MemoryBarrier();
-+
-+    while ((GET_UINT32(p_MiiAccess->mdio_data)) & MIIDATA_BUSY)
-+        XX_UDelay (1);
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error TGEC_MII_ReadPhyReg(t_Handle h_Tgec,
-+                            uint8_t  phyAddr,
-+                            uint8_t  reg,
-+                            uint16_t *p_Data)
-+{
-+    t_Tgec                  *p_Tgec = (t_Tgec *)h_Tgec;
-+    t_TgecMiiAccessMemMap   *p_MiiAccess;
-+    uint32_t                cfgStatusReg;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec->p_MiiMemMap, E_INVALID_HANDLE);
-+
-+    p_MiiAccess = p_Tgec->p_MiiMemMap;
-+
-+    /* Configure MII */
-+    cfgStatusReg  = GET_UINT32(p_MiiAccess->mdio_cfg_status);
-+    cfgStatusReg &= ~MIIMCOM_DIV_MASK;
-+     /* (one half of fm clock => 2.5Mhz) */
-+    cfgStatusReg |=((((p_Tgec->fmMacControllerDriver.clkFreq*10)/2)/25) << MIIMCOM_DIV_SHIFT);
-+    WRITE_UINT32(p_MiiAccess->mdio_cfg_status, cfgStatusReg);
-+
-+    while ((GET_UINT32(p_MiiAccess->mdio_cfg_status)) & MIIMIND_BUSY)
-+        XX_UDelay (1);
-+
-+    WRITE_UINT32(p_MiiAccess->mdio_command, phyAddr);
-+
-+    WRITE_UINT32(p_MiiAccess->mdio_regaddr, reg);
-+
-+    CORE_MemoryBarrier();
-+
-+    while ((GET_UINT32(p_MiiAccess->mdio_cfg_status)) & MIIMIND_BUSY)
-+        XX_UDelay (1);
-+
-+    WRITE_UINT32(p_MiiAccess->mdio_command, (uint32_t)(phyAddr | MIIMCOM_READ_CYCLE));
-+
-+    CORE_MemoryBarrier();
-+
-+    while ((GET_UINT32(p_MiiAccess->mdio_data)) & MIIDATA_BUSY)
-+        XX_UDelay (1);
-+
-+    *p_Data =  (uint16_t)GET_UINT32(p_MiiAccess->mdio_data);
-+
-+    cfgStatusReg  = GET_UINT32(p_MiiAccess->mdio_cfg_status);
-+
-+    if (cfgStatusReg & MIIMIND_READ_ERROR)
-+        RETURN_ERROR(MINOR, E_INVALID_VALUE,
-+                     ("Read Error: phyAddr 0x%x, dev 0x%x, reg 0x%x, cfgStatusReg 0x%x",
-+                      ((phyAddr & 0xe0)>>5), (phyAddr & 0x1f), reg, cfgStatusReg));
-+
-+    return E_OK;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/tgec_mii_acc.h
-@@ -0,0 +1,80 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#ifndef __TGEC_MII_ACC_H
-+#define __TGEC_MII_ACC_H
-+
-+#include "std_ext.h"
-+
-+
-+/* MII  Management Command Register */
-+#define MIIMCOM_READ_POST_INCREMENT 0x00004000
-+#define MIIMCOM_READ_CYCLE          0x00008000
-+#define MIIMCOM_SCAN_CYCLE          0x00000800
-+#define MIIMCOM_PREAMBLE_DISABLE    0x00000400
-+
-+#define MIIMCOM_MDIO_HOLD_1_REG_CLK 0
-+#define MIIMCOM_MDIO_HOLD_2_REG_CLK 1
-+#define MIIMCOM_MDIO_HOLD_3_REG_CLK 2
-+#define MIIMCOM_MDIO_HOLD_4_REG_CLK 3
-+
-+#define MIIMCOM_DIV_MASK            0x0000ff00
-+#define MIIMCOM_DIV_SHIFT           8
-+
-+/* MII Management Indicator Register */
-+#define MIIMIND_BUSY                0x00000001
-+#define MIIMIND_READ_ERROR          0x00000002
-+
-+#define MIIDATA_BUSY                0x80000000
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(push,1)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+/*----------------------------------------------------*/
-+/* MII Configuration Control Memory Map Registers     */
-+/*----------------------------------------------------*/
-+typedef _Packed struct t_TgecMiiAccessMemMap
-+{
-+    volatile uint32_t   mdio_cfg_status;    /* 0x030  */
-+    volatile uint32_t   mdio_command;       /* 0x034  */
-+    volatile uint32_t   mdio_data;          /* 0x038  */
-+    volatile uint32_t   mdio_regaddr;       /* 0x03c  */
-+} _PackedType t_TgecMiiAccessMemMap ;
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+
-+#endif /* __TGEC_MII_ACC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/Makefile
-@@ -0,0 +1,15 @@
-+#
-+# Makefile for the Freescale Ethernet controllers
-+#
-+ccflags-y           += -DVERSION=\"\"
-+#
-+#Include netcomm SW specific definitions
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+
-+NCSW_FM_INC = $(srctree)/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/inc
-+
-+ccflags-y += -I$(NCSW_FM_INC)
-+
-+obj-y		+= fsl-ncsw-macsec.o
-+
-+fsl-ncsw-macsec-objs	:= fm_macsec.o fm_macsec_guest.o fm_macsec_master.o fm_macsec_secy.o
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/fm_macsec.c
-@@ -0,0 +1,237 @@
-+/*
-+ * Copyright 2008-2015 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+/******************************************************************************
-+
-+ @File          fm_macsec.c
-+
-+ @Description   FM MACSEC driver routines implementation.
-+*//***************************************************************************/
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "xx_ext.h"
-+#include "string_ext.h"
-+#include "sprint_ext.h"
-+#include "debug_ext.h"
-+
-+#include "fm_macsec.h"
-+
-+
-+/****************************************/
-+/*       API Init unit functions        */
-+/****************************************/
-+t_Handle FM_MACSEC_Config(t_FmMacsecParams *p_FmMacsecParam)
-+{
-+    t_FmMacsecControllerDriver *p_FmMacsecControllerDriver;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmMacsecParam, E_INVALID_HANDLE, NULL);
-+
-+    if (p_FmMacsecParam->guestMode)
-+        p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)FM_MACSEC_GUEST_Config(p_FmMacsecParam);
-+    else
-+        p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)FM_MACSEC_MASTER_Config(p_FmMacsecParam);
-+
-+    if (!p_FmMacsecControllerDriver)
-+        return NULL;
-+
-+    return (t_Handle)p_FmMacsecControllerDriver;
-+}
-+
-+t_Error FM_MACSEC_Init(t_Handle h_FmMacsec)
-+{
-+    t_FmMacsecControllerDriver *p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecControllerDriver->f_FM_MACSEC_Init)
-+        return p_FmMacsecControllerDriver->f_FM_MACSEC_Init(h_FmMacsec);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_Free(t_Handle h_FmMacsec)
-+{
-+    t_FmMacsecControllerDriver *p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecControllerDriver->f_FM_MACSEC_Free)
-+        return p_FmMacsecControllerDriver->f_FM_MACSEC_Free(h_FmMacsec);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_ConfigUnknownSciFrameTreatment(t_Handle h_FmMacsec, e_FmMacsecUnknownSciFrameTreatment treatMode)
-+{
-+    t_FmMacsecControllerDriver *p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigUnknownSciFrameTreatment)
-+        return p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigUnknownSciFrameTreatment(h_FmMacsec, treatMode);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_ConfigInvalidTagsFrameTreatment(t_Handle h_FmMacsec, bool deliverUncontrolled)
-+{
-+    t_FmMacsecControllerDriver *p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigInvalidTagsFrameTreatment)
-+        return p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigInvalidTagsFrameTreatment(h_FmMacsec, deliverUncontrolled);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_ConfigEncryptWithNoChangedTextFrameTreatment(t_Handle h_FmMacsec, bool discardUncontrolled)
-+{
-+    t_FmMacsecControllerDriver *p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigEncryptWithNoChangedTextFrameTreatment)
-+        return p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigEncryptWithNoChangedTextFrameTreatment(h_FmMacsec, discardUncontrolled);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_ConfigUntagFrameTreatment(t_Handle h_FmMacsec, e_FmMacsecUntagFrameTreatment treatMode)
-+{
-+    t_FmMacsecControllerDriver *p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigUntagFrameTreatment)
-+        return p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigUntagFrameTreatment(h_FmMacsec, treatMode);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_ConfigPnExhaustionThreshold(t_Handle h_FmMacsec, uint32_t pnExhThr)
-+{
-+    t_FmMacsecControllerDriver *p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigPnExhaustionThreshold)
-+        return p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigPnExhaustionThreshold(h_FmMacsec, pnExhThr);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_ConfigKeysUnreadable(t_Handle h_FmMacsec)
-+{
-+    t_FmMacsecControllerDriver *p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigKeysUnreadable)
-+        return p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigKeysUnreadable(h_FmMacsec);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_ConfigSectagWithoutSCI(t_Handle h_FmMacsec)
-+{
-+    t_FmMacsecControllerDriver *p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigSectagWithoutSCI)
-+        return p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigSectagWithoutSCI(h_FmMacsec);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_ConfigException(t_Handle h_FmMacsec, e_FmMacsecExceptions exception, bool enable)
-+{
-+    t_FmMacsecControllerDriver *p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigException)
-+        return p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigException(h_FmMacsec, exception, enable);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_GetRevision(t_Handle h_FmMacsec, uint32_t *p_MacsecRevision)
-+{
-+    t_FmMacsecControllerDriver *p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecControllerDriver->f_FM_MACSEC_GetRevision)
-+        return p_FmMacsecControllerDriver->f_FM_MACSEC_GetRevision(h_FmMacsec, p_MacsecRevision);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+
-+t_Error FM_MACSEC_Enable(t_Handle h_FmMacsec)
-+{
-+    t_FmMacsecControllerDriver *p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecControllerDriver->f_FM_MACSEC_Enable)
-+        return p_FmMacsecControllerDriver->f_FM_MACSEC_Enable(h_FmMacsec);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_Disable(t_Handle h_FmMacsec)
-+{
-+    t_FmMacsecControllerDriver *p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecControllerDriver->f_FM_MACSEC_Disable)
-+        return p_FmMacsecControllerDriver->f_FM_MACSEC_Disable(h_FmMacsec);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_SetException(t_Handle h_FmMacsec, e_FmMacsecExceptions exception, bool enable)
-+{
-+    t_FmMacsecControllerDriver *p_FmMacsecControllerDriver = (t_FmMacsecControllerDriver *)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecControllerDriver, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecControllerDriver->f_FM_MACSEC_SetException)
-+        return p_FmMacsecControllerDriver->f_FM_MACSEC_SetException(h_FmMacsec, exception, enable);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/fm_macsec.h
-@@ -0,0 +1,203 @@
-+/*
-+ * Copyright 2008-2015 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/******************************************************************************
-+ @File          fm_macsec.h
-+
-+ @Description   FM MACSEC internal structures and definitions.
-+*//***************************************************************************/
-+#ifndef __FM_MACSEC_H
-+#define __FM_MACSEC_H
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+#include "fm_macsec_ext.h"
-+
-+#include "fm_common.h"
-+
-+
-+#define __ERR_MODULE__  MODULE_FM_MACSEC
-+
-+
-+typedef struct
-+{
-+    t_Error (*f_FM_MACSEC_Init) (t_Handle h_FmMacsec);
-+    t_Error (*f_FM_MACSEC_Free) (t_Handle h_FmMacsec);
-+
-+    t_Error (*f_FM_MACSEC_ConfigUnknownSciFrameTreatment) (t_Handle h_FmMacsec, e_FmMacsecUnknownSciFrameTreatment treatMode);
-+    t_Error (*f_FM_MACSEC_ConfigInvalidTagsFrameTreatment) (t_Handle h_FmMacsec, bool deliverUncontrolled);
-+    t_Error (*f_FM_MACSEC_ConfigEncryptWithNoChangedTextFrameTreatment) (t_Handle h_FmMacsec, bool discardUncontrolled);
-+    t_Error (*f_FM_MACSEC_ConfigChangedTextWithNoEncryptFrameTreatment) (t_Handle h_FmMacsec, bool deliverUncontrolled);
-+    t_Error (*f_FM_MACSEC_ConfigUntagFrameTreatment) (t_Handle h_FmMacsec, e_FmMacsecUntagFrameTreatment treatMode);
-+    t_Error (*f_FM_MACSEC_ConfigOnlyScbIsSetFrameTreatment) (t_Handle h_FmMacsec, bool deliverUncontrolled);
-+    t_Error (*f_FM_MACSEC_ConfigPnExhaustionThreshold) (t_Handle h_FmMacsec, uint32_t pnExhThr);
-+    t_Error (*f_FM_MACSEC_ConfigKeysUnreadable) (t_Handle h_FmMacsec);
-+    t_Error (*f_FM_MACSEC_ConfigSectagWithoutSCI) (t_Handle h_FmMacsec);
-+    t_Error (*f_FM_MACSEC_ConfigException) (t_Handle h_FmMacsec, e_FmMacsecExceptions exception, bool enable);
-+
-+    t_Error (*f_FM_MACSEC_GetRevision) (t_Handle h_FmMacsec, uint32_t *p_MacsecRevision);
-+    t_Error (*f_FM_MACSEC_Enable) (t_Handle h_FmMacsec);
-+    t_Error (*f_FM_MACSEC_Disable) (t_Handle h_FmMacsec);
-+    t_Error (*f_FM_MACSEC_SetException) (t_Handle h_FmMacsec, e_FmMacsecExceptions exception, bool enable);
-+
-+} t_FmMacsecControllerDriver;
-+
-+t_Handle  FM_MACSEC_GUEST_Config(t_FmMacsecParams *p_FmMacsecParam);
-+t_Handle  FM_MACSEC_MASTER_Config(t_FmMacsecParams *p_FmMacsecParams);
-+
-+/***********************************************************************/
-+/*  MACSEC internal routines                                              */
-+/***********************************************************************/
-+
-+/**************************************************************************//**
-+
-+ @Group         FM_MACSEC_InterModule_grp FM MACSEC Inter-Module Unit
-+
-+ @Description   FM MACSEC Inter Module functions -
-+                These are not User API routines but routines that may be called
-+                from other modules. This will be the case in a single core environment,
-+                where instead of using the XX messaging mechanism, the routines may be
-+                called from other modules. In a multicore environment, the other modules may
-+                be run by other cores and therefore these routines may not be called directly.
-+
-+ @{
-+*//***************************************************************************/
-+
-+#define MAX_NUM_OF_SA_PER_SC        4
-+
-+typedef enum
-+{
-+    e_SC_RX = 0,
-+    e_SC_TX
-+} e_ScType;
-+
-+typedef enum
-+{
-+    e_SC_SA_A = 0,
-+    e_SC_SA_B ,
-+    e_SC_SA_C ,
-+    e_SC_SA_D
-+} e_ScSaId;
-+
-+typedef struct
-+{
-+    uint32_t                        scId;
-+    macsecSCI_t                     sci;
-+    bool                            replayProtect;
-+    uint32_t                        replayWindow;
-+    e_FmMacsecValidFrameBehavior    validateFrames;
-+    uint16_t                        confidentialityOffset;
-+    e_FmMacsecSecYCipherSuite       cipherSuite;
-+} t_RxScParams;
-+
-+typedef struct
-+{
-+    uint32_t                        scId;
-+    macsecSCI_t                     sci;
-+    bool                            protectFrames;
-+    e_FmMacsecSciInsertionMode      sciInsertionMode;
-+    bool                            confidentialityEnable;
-+    uint16_t                        confidentialityOffset;
-+    e_FmMacsecSecYCipherSuite       cipherSuite;
-+} t_TxScParams;
-+
-+typedef enum e_FmMacsecGlobalExceptions {
-+    e_FM_MACSEC_EX_TX_SC,               /**< Tx Sc 0 frame discarded error. */
-+    e_FM_MACSEC_EX_ECC                  /**< MACSEC memory ECC multiple-bit error. */
-+} e_FmMacsecGlobalExceptions;
-+
-+typedef enum e_FmMacsecGlobalEvents {
-+    e_FM_MACSEC_EV_TX_SC_NEXT_PN        /**< Tx Sc 0 Next Pn exhaustion threshold reached. */
-+} e_FmMacsecGlobalEvents;
-+
-+/**************************************************************************//**
-+ @Description   Enum for inter-module interrupts registration
-+*//***************************************************************************/
-+typedef enum e_FmMacsecEventModules{
-+    e_FM_MACSEC_MOD_SC_TX,
-+    e_FM_MACSEC_MOD_DUMMY_LAST
-+} e_FmMacsecEventModules;
-+
-+typedef enum e_FmMacsecInterModuleEvent {
-+    e_FM_MACSEC_EV_SC_TX,
-+    e_FM_MACSEC_EV_ERR_SC_TX,
-+    e_FM_MACSEC_EV_DUMMY_LAST
-+} e_FmMacsecInterModuleEvent;
-+
-+#define NUM_OF_INTER_MODULE_EVENTS (NUM_OF_TX_SC * 2)
-+
-+#define GET_MACSEC_MODULE_EVENT(mod, id, intrType, event) \
-+    switch(mod){                                          \
-+        case e_FM_MACSEC_MOD_SC_TX:                       \
-+             event = (intrType == e_FM_INTR_TYPE_ERR) ?   \
-+                        e_FM_MACSEC_EV_ERR_SC_TX:         \
-+                        e_FM_MACSEC_EV_SC_TX;             \
-+             event += (uint8_t)(2 * id);break;            \
-+            break;                                        \
-+        default:event = e_FM_MACSEC_EV_DUMMY_LAST;        \
-+        break;}
-+
-+void FmMacsecRegisterIntr(t_Handle                h_FmMacsec,
-+                          e_FmMacsecEventModules  module,
-+                          uint8_t                 modId,
-+                          e_FmIntrType            intrType,
-+                          void (*f_Isr) (t_Handle h_Arg, uint32_t id),
-+                          t_Handle                h_Arg);
-+
-+void FmMacsecUnregisterIntr(t_Handle                h_FmMacsec,
-+                            e_FmMacsecEventModules  module,
-+                            uint8_t                 modId,
-+                            e_FmIntrType            intrType);
-+
-+t_Error FmMacsecAllocScs(t_Handle h_FmMacsec, e_ScType type, bool isPtp, uint32_t numOfScs, uint32_t *p_ScIds);
-+t_Error FmMacsecFreeScs(t_Handle h_FmMacsec, e_ScType type, uint32_t numOfScs, uint32_t *p_ScIds);
-+t_Error FmMacsecCreateRxSc(t_Handle h_FmMacsec, t_RxScParams *p_RxScParams);
-+t_Error FmMacsecDeleteRxSc(t_Handle h_FmMacsec, uint32_t scId);
-+t_Error FmMacsecCreateTxSc(t_Handle h_FmMacsec, t_TxScParams *p_RxScParams);
-+t_Error FmMacsecDeleteTxSc(t_Handle h_FmMacsec, uint32_t scId);
-+t_Error FmMacsecCreateRxSa(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId, macsecAN_t an, uint32_t lowestPn, macsecSAKey_t key);
-+t_Error FmMacsecCreateTxSa(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId, macsecSAKey_t key);
-+t_Error FmMacsecDeleteRxSa(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId);
-+t_Error FmMacsecDeleteTxSa(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId);
-+t_Error FmMacsecRxSaSetReceive(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId, bool enableReceive);
-+t_Error FmMacsecRxSaUpdateNextPn(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId, uint32_t updtNextPN);
-+t_Error FmMacsecRxSaUpdateLowestPn(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId, uint32_t updtLowestPN);
-+t_Error FmMacsecTxSaSetActive(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId, macsecAN_t an);
-+t_Error FmMacsecTxSaGetActive(t_Handle h_FmMacsec, uint32_t scId, macsecAN_t *p_An);
-+t_Error FmMacsecSetPTP(t_Handle h_FmMacsec, bool enable);
-+
-+t_Error FmMacsecSetException(t_Handle h_FmMacsec, e_FmMacsecGlobalExceptions exception, uint32_t scId, bool enable);
-+t_Error FmMacsecSetEvent(t_Handle h_FmMacsec, e_FmMacsecGlobalEvents event, uint32_t scId, bool enable);
-+
-+
-+
-+#endif /* __FM_MACSEC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/fm_macsec_guest.c
-@@ -0,0 +1,59 @@
-+/*
-+ * Copyright 2008-2015 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/******************************************************************************
-+ @File          fm_macsec.c
-+
-+ @Description   FM MACSEC driver routines implementation.
-+*//***************************************************************************/
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "xx_ext.h"
-+#include "string_ext.h"
-+#include "sprint_ext.h"
-+#include "debug_ext.h"
-+#include "fm_macsec.h"
-+
-+
-+/****************************************/
-+/*       static functions               */
-+/****************************************/
-+
-+/****************************************/
-+/*       API Init unit functions        */
-+/****************************************/
-+t_Handle FM_MACSEC_GUEST_Config(t_FmMacsecParams *p_FmMacsecParam)
-+{
-+    UNUSED(p_FmMacsecParam);
-+    return NULL;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/fm_macsec_master.c
-@@ -0,0 +1,1031 @@
-+/*
-+ * Copyright 2008-2015 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/******************************************************************************
-+ @File          fm_macsec.c
-+
-+ @Description   FM MACSEC driver routines implementation.
-+*//***************************************************************************/
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "xx_ext.h"
-+#include "string_ext.h"
-+#include "sprint_ext.h"
-+#include "fm_mac_ext.h"
-+
-+#include "fm_macsec_master.h"
-+
-+
-+extern uint16_t    FM_MAC_GetMaxFrameLength(t_Handle FmMac);
-+
-+
-+/****************************************/
-+/*       static functions               */
-+/****************************************/
-+static t_Error CheckFmMacsecParameters(t_FmMacsec *p_FmMacsec)
-+{
-+    if (!p_FmMacsec->f_Exception)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Exceptions callback not provided"));
-+
-+    return E_OK;
-+}
-+
-+static void UnimplementedIsr(t_Handle h_Arg, uint32_t id)
-+{
-+    UNUSED(h_Arg); UNUSED(id);
-+
-+    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Unimplemented Isr!"));
-+}
-+
-+static void MacsecEventIsr(t_Handle h_FmMacsec)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    uint32_t    events,event,i;
-+
-+    SANITY_CHECK_RETURN(p_FmMacsec, E_INVALID_HANDLE);
-+
-+    events = GET_UINT32(p_FmMacsec->p_FmMacsecRegs->evr);
-+    events |= GET_UINT32(p_FmMacsec->p_FmMacsecRegs->ever);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->evr,events);
-+
-+    for (i=0; i<NUM_OF_TX_SC; i++)
-+        if (events & FM_MACSEC_EV_TX_SC_NEXT_PN(i))
-+        {
-+            GET_MACSEC_MODULE_EVENT(e_FM_MACSEC_MOD_SC_TX, i, e_FM_INTR_TYPE_NORMAL, event);
-+            p_FmMacsec->intrMng[event].f_Isr(p_FmMacsec->intrMng[event].h_SrcHandle, i);
-+        }
-+}
-+
-+static void MacsecErrorIsr(t_Handle h_FmMacsec)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    uint32_t    errors,error,i;
-+
-+    SANITY_CHECK_RETURN(p_FmMacsec, E_INVALID_HANDLE);
-+
-+    errors = GET_UINT32(p_FmMacsec->p_FmMacsecRegs->err);
-+    errors |= GET_UINT32(p_FmMacsec->p_FmMacsecRegs->erer);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->err,errors);
-+
-+    for (i=0; i<NUM_OF_TX_SC; i++)
-+        if (errors & FM_MACSEC_EX_TX_SC(i))
-+        {
-+            GET_MACSEC_MODULE_EVENT(e_FM_MACSEC_MOD_SC_TX, i, e_FM_INTR_TYPE_ERR, error);
-+            p_FmMacsec->intrMng[error].f_Isr(p_FmMacsec->intrMng[error].h_SrcHandle, i);
-+        }
-+
-+    if (errors & FM_MACSEC_EX_ECC)
-+    {
-+        uint8_t     eccType;
-+        uint32_t    tmpReg;
-+
-+        tmpReg = GET_UINT32(p_FmMacsec->p_FmMacsecRegs->meec);
-+        ASSERT_COND(tmpReg & MECC_CAP);
-+        eccType = (uint8_t)((tmpReg & MECC_CET) >> MECC_CET_SHIFT);
-+
-+        if (!eccType && (p_FmMacsec->userExceptions & FM_MACSEC_USER_EX_SINGLE_BIT_ECC))
-+            p_FmMacsec->f_Exception(p_FmMacsec->h_App,e_FM_MACSEC_EX_SINGLE_BIT_ECC);
-+        else if (eccType && (p_FmMacsec->userExceptions & FM_MACSEC_USER_EX_MULTI_BIT_ECC))
-+            p_FmMacsec->f_Exception(p_FmMacsec->h_App,e_FM_MACSEC_EX_MULTI_BIT_ECC);
-+        else
-+            WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->meec,tmpReg);
-+    }
-+}
-+
-+static t_Error MacsecInit(t_Handle h_FmMacsec)
-+{
-+    t_FmMacsec                  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_FmMacsecDriverParam       *p_FmMacsecDriverParam = NULL;
-+    uint32_t                    tmpReg,i,macId;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    CHECK_INIT_PARAMETERS(p_FmMacsec, CheckFmMacsecParameters);
-+
-+    p_FmMacsecDriverParam = p_FmMacsec->p_FmMacsecDriverParam;
-+
-+    for (i=0;i<e_FM_MACSEC_EV_DUMMY_LAST;i++)
-+        p_FmMacsec->intrMng[i].f_Isr = UnimplementedIsr;
-+
-+    tmpReg = 0;
-+    tmpReg |= (p_FmMacsecDriverParam->changedTextWithNoEncryptDeliverUncontrolled << CFG_UECT_SHIFT)|
-+              (p_FmMacsecDriverParam->onlyScbIsSetDeliverUncontrolled << CFG_ESCBT_SHIFT)           |
-+              (p_FmMacsecDriverParam->unknownSciTreatMode << CFG_USFT_SHIFT)                        |
-+              (p_FmMacsecDriverParam->invalidTagsDeliverUncontrolled << CFG_ITT_SHIFT)              |
-+              (p_FmMacsecDriverParam->encryptWithNoChangedTextDiscardUncontrolled << CFG_KFT_SHIFT) |
-+              (p_FmMacsecDriverParam->untagTreatMode << CFG_UFT_SHIFT)                              |
-+              (p_FmMacsecDriverParam->keysUnreadable << CFG_KSS_SHIFT)                              |
-+              (p_FmMacsecDriverParam->reservedSc0 << CFG_S0I_SHIFT)                                 |
-+              (p_FmMacsecDriverParam->byPassMode << CFG_BYPN_SHIFT);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->cfg, tmpReg);
-+
-+    tmpReg = FM_MAC_GetMaxFrameLength(p_FmMacsec->h_FmMac);
-+    /* At least Ethernet FCS (4 bytes) overhead must be subtracted from MFL.
-+     * In addition, the SCI (8 bytes) overhead might be subtracted as well. */
-+    tmpReg -= p_FmMacsecDriverParam->mflSubtract;
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->mfl, tmpReg);
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->tpnet, p_FmMacsecDriverParam->pnExhThr);
-+
-+    if (!p_FmMacsec->userExceptions)
-+        p_FmMacsec->exceptions &= ~FM_MACSEC_EX_ECC;
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->erer, p_FmMacsec->exceptions);
-+
-+    p_FmMacsec->numRxScAvailable = NUM_OF_RX_SC;
-+    if (p_FmMacsecDriverParam->reservedSc0)
-+        p_FmMacsec->numRxScAvailable --;
-+    p_FmMacsec->numTxScAvailable = NUM_OF_TX_SC;
-+
-+    XX_Free(p_FmMacsecDriverParam);
-+    p_FmMacsec->p_FmMacsecDriverParam = NULL;
-+
-+    FM_MAC_GetId(p_FmMacsec->h_FmMac, &macId);
-+    FmRegisterIntr(p_FmMacsec->h_Fm,
-+                   e_FM_MOD_MACSEC,
-+                   (uint8_t)macId,
-+                   e_FM_INTR_TYPE_NORMAL,
-+                   MacsecEventIsr,
-+                   p_FmMacsec);
-+
-+    FmRegisterIntr(p_FmMacsec->h_Fm,
-+                   e_FM_MOD_MACSEC,
-+                   0,
-+                   e_FM_INTR_TYPE_ERR,
-+                   MacsecErrorIsr,
-+                   p_FmMacsec);
-+
-+    return E_OK;
-+}
-+
-+static t_Error MacsecFree(t_Handle h_FmMacsec)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    uint32_t    macId;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    FM_MAC_GetId(p_FmMacsec->h_FmMac, &macId);
-+    FmUnregisterIntr(p_FmMacsec->h_Fm,
-+                   e_FM_MOD_MACSEC,
-+                   (uint8_t)macId,
-+                   e_FM_INTR_TYPE_NORMAL);
-+
-+    FmUnregisterIntr(p_FmMacsec->h_Fm,
-+                   e_FM_MOD_MACSEC,
-+                   0,
-+                   e_FM_INTR_TYPE_ERR);
-+
-+    if (p_FmMacsec->rxScSpinLock)
-+        XX_FreeSpinlock(p_FmMacsec->rxScSpinLock);
-+    if (p_FmMacsec->txScSpinLock)
-+        XX_FreeSpinlock(p_FmMacsec->txScSpinLock);
-+
-+    XX_Free(p_FmMacsec);
-+
-+    return E_OK;
-+}
-+
-+static t_Error MacsecConfigUnknownSciFrameTreatment(t_Handle h_FmMacsec, e_FmMacsecUnknownSciFrameTreatment treatMode)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmMacsec->p_FmMacsecDriverParam->unknownSciTreatMode = treatMode;
-+
-+    return E_OK;
-+}
-+
-+static t_Error MacsecConfigInvalidTagsFrameTreatment(t_Handle h_FmMacsec, bool deliverUncontrolled)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmMacsec->p_FmMacsecDriverParam->invalidTagsDeliverUncontrolled = deliverUncontrolled;
-+
-+    return E_OK;
-+}
-+
-+static t_Error MacsecConfigChangedTextWithNoEncryptFrameTreatment(t_Handle h_FmMacsec, bool deliverUncontrolled)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmMacsec->p_FmMacsecDriverParam->changedTextWithNoEncryptDeliverUncontrolled = deliverUncontrolled;
-+
-+    return E_OK;
-+}
-+
-+static t_Error MacsecConfigOnlyScbIsSetFrameTreatment(t_Handle h_FmMacsec, bool deliverUncontrolled)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmMacsec->p_FmMacsecDriverParam->onlyScbIsSetDeliverUncontrolled = deliverUncontrolled;
-+
-+    return E_OK;
-+}
-+
-+static t_Error MacsecConfigEncryptWithNoChangedTextFrameTreatment(t_Handle h_FmMacsec, bool discardUncontrolled)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmMacsec->p_FmMacsecDriverParam->encryptWithNoChangedTextDiscardUncontrolled = discardUncontrolled;
-+
-+    return E_OK;
-+}
-+
-+static t_Error MacsecConfigUntagFrameTreatment(t_Handle h_FmMacsec, e_FmMacsecUntagFrameTreatment treatMode)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmMacsec->p_FmMacsecDriverParam->untagTreatMode = treatMode;
-+
-+    return E_OK;
-+}
-+
-+static t_Error MacsecConfigPnExhaustionThreshold(t_Handle h_FmMacsec, uint32_t pnExhThr)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmMacsec->p_FmMacsecDriverParam->pnExhThr = pnExhThr;
-+
-+    return E_OK;
-+}
-+
-+static t_Error MacsecConfigKeysUnreadable(t_Handle h_FmMacsec)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmMacsec->p_FmMacsecDriverParam->keysUnreadable = TRUE;
-+
-+    return E_OK;
-+}
-+
-+static t_Error MacsecConfigSectagWithoutSCI(t_Handle h_FmMacsec)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmMacsec->p_FmMacsecDriverParam->sectagOverhead -= MACSEC_SCI_SIZE;
-+    p_FmMacsec->p_FmMacsecDriverParam->mflSubtract += MACSEC_SCI_SIZE;
-+
-+    return E_OK;
-+}
-+
-+static t_Error MacsecConfigException(t_Handle h_FmMacsec, e_FmMacsecExceptions exception, bool enable)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    uint32_t    bitMask = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    GET_USER_EXCEPTION_FLAG(bitMask, exception);
-+    if (bitMask)
-+    {
-+        if (enable)
-+            p_FmMacsec->userExceptions |= bitMask;
-+        else
-+            p_FmMacsec->userExceptions &= ~bitMask;
-+    }
-+    else
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Undefined exception"));
-+
-+    return E_OK;
-+}
-+
-+static t_Error MacsecGetRevision(t_Handle h_FmMacsec, uint32_t *p_MacsecRevision)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    *p_MacsecRevision = GET_UINT32(p_FmMacsec->p_FmMacsecRegs->ip_rev1);
-+
-+    return E_OK;
-+}
-+
-+static t_Error MacsecEnable(t_Handle h_FmMacsec)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    uint32_t    tmpReg;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    tmpReg  = GET_UINT32(p_FmMacsec->p_FmMacsecRegs->cfg);
-+    tmpReg |= CFG_BYPN;
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->cfg,tmpReg);
-+
-+    return E_OK;
-+}
-+
-+static t_Error MacsecDisable(t_Handle h_FmMacsec)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    uint32_t    tmpReg;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    tmpReg  = GET_UINT32(p_FmMacsec->p_FmMacsecRegs->cfg);
-+    tmpReg &= ~CFG_BYPN;
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->cfg,tmpReg);
-+
-+    return E_OK;
-+}
-+
-+static t_Error MacsecSetException(t_Handle h_FmMacsec, e_FmMacsecExceptions exception, bool enable)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    uint32_t    bitMask;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    GET_USER_EXCEPTION_FLAG(bitMask, exception);
-+    if (bitMask)
-+    {
-+        if (enable)
-+            p_FmMacsec->userExceptions |= bitMask;
-+        else
-+            p_FmMacsec->userExceptions &= ~bitMask;
-+    }
-+    else
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Undefined exception"));
-+
-+    if (!p_FmMacsec->userExceptions)
-+        p_FmMacsec->exceptions &= ~FM_MACSEC_EX_ECC;
-+    else
-+        p_FmMacsec->exceptions |= FM_MACSEC_EX_ECC;
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->erer, p_FmMacsec->exceptions);
-+
-+    return E_OK;
-+}
-+
-+static void InitFmMacsecControllerDriver(t_FmMacsecControllerDriver *p_FmMacsecControllerDriver)
-+{
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_Init                                            = MacsecInit;
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_Free                                            = MacsecFree;
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigUnknownSciFrameTreatment                  = MacsecConfigUnknownSciFrameTreatment;
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigInvalidTagsFrameTreatment                 = MacsecConfigInvalidTagsFrameTreatment;
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigEncryptWithNoChangedTextFrameTreatment    = MacsecConfigEncryptWithNoChangedTextFrameTreatment;
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigUntagFrameTreatment                       = MacsecConfigUntagFrameTreatment;
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigChangedTextWithNoEncryptFrameTreatment    = MacsecConfigChangedTextWithNoEncryptFrameTreatment;
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigOnlyScbIsSetFrameTreatment                = MacsecConfigOnlyScbIsSetFrameTreatment;
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigPnExhaustionThreshold                     = MacsecConfigPnExhaustionThreshold;
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigKeysUnreadable                            = MacsecConfigKeysUnreadable;
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigSectagWithoutSCI                          = MacsecConfigSectagWithoutSCI;
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_ConfigException                                 = MacsecConfigException;
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_GetRevision                                     = MacsecGetRevision;
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_Enable                                          = MacsecEnable;
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_Disable                                         = MacsecDisable;
-+    p_FmMacsecControllerDriver->f_FM_MACSEC_SetException                                    = MacsecSetException;
-+}
-+
-+/****************************************/
-+/*       Inter-Module functions         */
-+/****************************************/
-+
-+void FmMacsecRegisterIntr(t_Handle                h_FmMacsec,
-+                          e_FmMacsecEventModules  module,
-+                          uint8_t                 modId,
-+                          e_FmIntrType            intrType,
-+                          void (*f_Isr) (t_Handle h_Arg, uint32_t id),
-+                          t_Handle                h_Arg)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    uint8_t     event= 0;
-+
-+    SANITY_CHECK_RETURN(p_FmMacsec, E_INVALID_HANDLE);
-+
-+    GET_MACSEC_MODULE_EVENT(module, modId, intrType, event);
-+
-+    ASSERT_COND(event != e_FM_MACSEC_EV_DUMMY_LAST);
-+    p_FmMacsec->intrMng[event].f_Isr = f_Isr;
-+    p_FmMacsec->intrMng[event].h_SrcHandle = h_Arg;
-+}
-+
-+void FmMacsecUnregisterIntr(t_Handle                h_FmMacsec,
-+                            e_FmMacsecEventModules  module,
-+                            uint8_t                 modId,
-+                            e_FmIntrType            intrType)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    uint8_t     event= 0;
-+
-+    SANITY_CHECK_RETURN(p_FmMacsec, E_INVALID_HANDLE);
-+
-+    GET_MACSEC_MODULE_EVENT(module, modId,intrType, event);
-+
-+    ASSERT_COND(event != e_FM_MACSEC_EV_DUMMY_LAST);
-+    p_FmMacsec->intrMng[event].f_Isr = NULL;
-+    p_FmMacsec->intrMng[event].h_SrcHandle = NULL;
-+}
-+
-+t_Error FmMacsecAllocScs(t_Handle h_FmMacsec, e_ScType type, bool isPtp, uint32_t numOfScs, uint32_t *p_ScIds)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_Error     err = E_OK;
-+    bool        *p_ScTable;
-+    uint32_t    *p_ScAvailable,i;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_ScIds, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(numOfScs, E_INVALID_HANDLE);
-+
-+    if (type == e_SC_RX)
-+    {
-+        p_ScTable       = (bool *)p_FmMacsec->rxScTable;
-+        p_ScAvailable   = &p_FmMacsec->numRxScAvailable;
-+        i               = (NUM_OF_RX_SC - 1);
-+    }
-+    else
-+    {
-+        p_ScTable       = (bool *)p_FmMacsec->txScTable;
-+        p_ScAvailable   = &p_FmMacsec->numTxScAvailable;
-+        i               = (NUM_OF_TX_SC - 1);
-+
-+    }
-+    if (*p_ScAvailable < numOfScs)
-+        RETURN_ERROR(MINOR, E_NOT_AVAILABLE, ("Not enough SCs available"));
-+
-+    if (isPtp)
-+    {
-+        i = 0;
-+        if (p_ScTable[i])
-+            RETURN_ERROR(MINOR, E_NOT_AVAILABLE, ("Sc 0 Not available"));
-+    }
-+
-+    for (;numOfScs;i--)
-+    {
-+        if (p_ScTable[i])
-+            continue;
-+        numOfScs --;
-+        (*p_ScAvailable)--;
-+        p_ScIds[numOfScs] = i;
-+        p_ScTable[i] = TRUE;
-+    }
-+
-+    return err;
-+}
-+
-+t_Error FmMacsecFreeScs(t_Handle h_FmMacsec, e_ScType type, uint32_t numOfScs, uint32_t *p_ScIds)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_Error     err = E_OK;
-+    bool        *p_ScTable;
-+    uint32_t    *p_ScAvailable,maxNumOfSc,i;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_ScIds, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(numOfScs, E_INVALID_HANDLE);
-+
-+    if (type == e_SC_RX)
-+    {
-+        p_ScTable       = (bool *)p_FmMacsec->rxScTable;
-+        p_ScAvailable   = &p_FmMacsec->numRxScAvailable;
-+        maxNumOfSc      = NUM_OF_RX_SC;
-+    }
-+    else
-+    {
-+        p_ScTable       = (bool *)p_FmMacsec->txScTable;
-+        p_ScAvailable   = &p_FmMacsec->numTxScAvailable;
-+        maxNumOfSc      = NUM_OF_TX_SC;
-+    }
-+
-+    if ((*p_ScAvailable + numOfScs) > maxNumOfSc)
-+        RETURN_ERROR(MINOR, E_FULL, ("Too much SCs"));
-+
-+    for (i=0;i<numOfScs;i++)
-+    {
-+        p_ScTable[p_ScIds[i]] = FALSE;
-+        (*p_ScAvailable)++;
-+    }
-+
-+    return err;
-+
-+}
-+
-+t_Error FmMacsecSetPTP(t_Handle h_FmMacsec, bool enable)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    uint32_t    tmpReg = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+
-+    tmpReg = GET_UINT32(p_FmMacsec->p_FmMacsecRegs->cfg);
-+    if (enable && (tmpReg & CFG_S0I))
-+        RETURN_ERROR(MINOR, E_INVALID_STATE, ("MACSEC already in point-to-point mode"));
-+
-+    if (enable)
-+        tmpReg |= CFG_S0I;
-+    else
-+        tmpReg &= ~CFG_S0I;
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->cfg, tmpReg);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmMacsecCreateRxSc(t_Handle h_FmMacsec, t_RxScParams *p_RxScParams)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_Error     err = E_OK;
-+    uint32_t    tmpReg = 0, intFlags;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_RxScParams, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_RxScParams->scId < NUM_OF_RX_SC, E_INVALID_HANDLE);
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmMacsec->rxScSpinLock);
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->rxsca, p_RxScParams->scId);
-+    tmpReg = GET_UINT32(p_FmMacsec->p_FmMacsecRegs->rxsccfg);
-+    if (tmpReg & RX_SCCFG_SCI_EN_MASK)
-+    {
-+        XX_UnlockIntrSpinlock(p_FmMacsec->rxScSpinLock, intFlags);
-+        RETURN_ERROR(MINOR, E_INVALID_STATE, ("Rx Sc %d must be disable",p_RxScParams->scId));
-+    }
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->rxsci1h, GET_SCI_FIRST_HALF(p_RxScParams->sci));
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->rxsci2h, GET_SCI_SECOND_HALF(p_RxScParams->sci));
-+    tmpReg |= ((p_RxScParams->replayProtect << RX_SCCFG_RP_SHIFT) & RX_SCCFG_RP_MASK);
-+    tmpReg |= ((p_RxScParams->validateFrames << RX_SCCFG_VF_SHIFT) & RX_SCCFG_VF_MASK);
-+    tmpReg |= ((p_RxScParams->confidentialityOffset << RX_SCCFG_CO_SHIFT) & RX_SCCFG_CO_MASK);
-+    tmpReg |= RX_SCCFG_SCI_EN_MASK;
-+    tmpReg |= (p_RxScParams->cipherSuite << RX_SCCFG_CS_SHIFT);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->rxsccfg, tmpReg);
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->rpw, p_RxScParams->replayWindow);
-+
-+    XX_UnlockIntrSpinlock(p_FmMacsec->rxScSpinLock, intFlags);
-+
-+    return err;
-+}
-+
-+t_Error FmMacsecDeleteRxSc(t_Handle h_FmMacsec, uint32_t scId)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_Error     err = E_OK;
-+    uint32_t    tmpReg = 0, intFlags;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(scId < NUM_OF_RX_SC, E_INVALID_HANDLE);
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmMacsec->rxScSpinLock);
-+
-+    tmpReg &= ~RX_SCCFG_SCI_EN_MASK;
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->rxsca, scId);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->rxsccfg, tmpReg);
-+
-+    XX_UnlockIntrSpinlock(p_FmMacsec->rxScSpinLock, intFlags);
-+
-+    return err;
-+}
-+
-+t_Error FmMacsecCreateTxSc(t_Handle h_FmMacsec, t_TxScParams *p_TxScParams)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_Error     err = E_OK;
-+    uint32_t    tmpReg = 0, intFlags;
-+    bool        alwaysIncludeSCI = FALSE, useES = FALSE, useSCB = FALSE;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_TxScParams, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_TxScParams->scId < NUM_OF_TX_SC, E_INVALID_HANDLE);
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmMacsec->txScSpinLock);
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->txsca, p_TxScParams->scId);
-+
-+    tmpReg = GET_UINT32(p_FmMacsec->p_FmMacsecRegs->txsccfg);
-+    if (tmpReg & TX_SCCFG_SCE_MASK)
-+    {
-+        XX_UnlockIntrSpinlock(p_FmMacsec->txScSpinLock, intFlags);
-+        RETURN_ERROR(MINOR, E_INVALID_STATE, ("Tx Sc %d must be disable",p_TxScParams->scId));
-+    }
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->txsci1h, GET_SCI_FIRST_HALF(p_TxScParams->sci));
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->txsci2h, GET_SCI_SECOND_HALF(p_TxScParams->sci));
-+    alwaysIncludeSCI = (p_TxScParams->sciInsertionMode == e_FM_MACSEC_SCI_INSERTION_MODE_EXPLICIT_SECTAG);
-+    useES            = (p_TxScParams->sciInsertionMode == e_FM_MACSEC_SCI_INSERTION_MODE_EXPLICIT_MAC_SA);
-+
-+    tmpReg |= ((p_TxScParams->protectFrames << TX_SCCFG_PF_SHIFT) & TX_SCCFG_PF_MASK);
-+    tmpReg |= ((alwaysIncludeSCI << TX_SCCFG_AIS_SHIFT) & TX_SCCFG_AIS_MASK);
-+    tmpReg |= ((useES << TX_SCCFG_UES_SHIFT) & TX_SCCFG_UES_MASK);
-+    tmpReg |= ((useSCB << TX_SCCFG_USCB_SHIFT) & TX_SCCFG_USCB_MASK);
-+    tmpReg |= ((p_TxScParams->confidentialityEnable << TX_SCCFG_CE_SHIFT) & TX_SCCFG_CE_MASK);
-+    tmpReg |= ((p_TxScParams->confidentialityOffset << TX_SCCFG_CO_SHIFT) & TX_SCCFG_CO_MASK);
-+    tmpReg |= TX_SCCFG_SCE_MASK;
-+    tmpReg |= (p_TxScParams->cipherSuite << TX_SCCFG_CS_SHIFT);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->txsccfg, tmpReg);
-+
-+    XX_UnlockIntrSpinlock(p_FmMacsec->txScSpinLock, intFlags);
-+
-+    return err;
-+}
-+
-+t_Error FmMacsecDeleteTxSc(t_Handle h_FmMacsec, uint32_t scId)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_Error     err = E_OK;
-+    uint32_t    tmpReg = 0, intFlags;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(scId < NUM_OF_TX_SC, E_INVALID_HANDLE);
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmMacsec->txScSpinLock);
-+
-+    tmpReg &= ~TX_SCCFG_SCE_MASK;
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->txsca, scId);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->txsccfg, tmpReg);
-+
-+    XX_UnlockIntrSpinlock(p_FmMacsec->txScSpinLock, intFlags);
-+
-+    return err;
-+}
-+
-+t_Error FmMacsecCreateRxSa(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId, macsecAN_t an, uint32_t lowestPn, macsecSAKey_t key)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_Error     err = E_OK;
-+    uint32_t    tmpReg = 0, intFlags;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(scId < NUM_OF_RX_SC, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(saId < NUM_OF_SA_PER_RX_SC, E_INVALID_HANDLE);
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmMacsec->rxScSpinLock);
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->rxsca, scId);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecRxScSa[saId].rxsanpn, DEFAULT_initNextPn);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecRxScSa[saId].rxsalpn, lowestPn);
-+    MemCpy8((void*)p_FmMacsec->p_FmMacsecRegs->fmMacsecRxScSa[saId].rxsak, key, sizeof(macsecSAKey_t));
-+
-+    tmpReg |= RX_SACFG_ACTIVE;
-+    tmpReg |= ((an << RX_SACFG_AN_SHIFT) & RX_SACFG_AN_MASK);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecRxScSa[saId].rxsacs, tmpReg);
-+
-+    XX_UnlockIntrSpinlock(p_FmMacsec->rxScSpinLock, intFlags);
-+
-+    return err;
-+}
-+
-+t_Error FmMacsecCreateTxSa(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId, macsecSAKey_t key)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_Error     err = E_OK;
-+    uint32_t    tmpReg = 0, intFlags;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(scId < NUM_OF_RX_SC, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(saId < NUM_OF_SA_PER_TX_SC, E_INVALID_HANDLE);
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmMacsec->txScSpinLock);
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->txsca, scId);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecTxScSa[saId].txsanpn, DEFAULT_initNextPn);
-+    MemCpy8((void*)p_FmMacsec->p_FmMacsecRegs->fmMacsecTxScSa[saId].txsak, key, sizeof(macsecSAKey_t));
-+
-+    tmpReg |= TX_SACFG_ACTIVE;
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecTxScSa[saId].txsacs, tmpReg);
-+
-+    XX_UnlockIntrSpinlock(p_FmMacsec->txScSpinLock, intFlags);
-+
-+    return err;
-+}
-+
-+t_Error FmMacsecDeleteRxSa(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_Error     err = E_OK;
-+    uint32_t    tmpReg = 0, i, intFlags;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(scId < NUM_OF_RX_SC, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(saId < NUM_OF_SA_PER_RX_SC, E_INVALID_HANDLE);
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmMacsec->rxScSpinLock);
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->rxsca, scId);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecRxScSa[saId].rxsanpn, 0x0);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecRxScSa[saId].rxsalpn, 0x0);
-+    for (i=0; i<4; i++)
-+        WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecRxScSa[saId].rxsak[i], 0x0);
-+
-+    tmpReg |= RX_SACFG_ACTIVE;
-+    tmpReg &= ~RX_SACFG_EN_MASK;
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecRxScSa[saId].rxsacs, tmpReg);
-+
-+    XX_UnlockIntrSpinlock(p_FmMacsec->rxScSpinLock, intFlags);
-+
-+    return err;
-+}
-+
-+t_Error FmMacsecDeleteTxSa(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_Error     err = E_OK;
-+    uint32_t    tmpReg = 0, i, intFlags;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(scId < NUM_OF_RX_SC, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(saId < NUM_OF_SA_PER_TX_SC, E_INVALID_HANDLE);
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmMacsec->txScSpinLock);
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->txsca, scId);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecTxScSa[saId].txsanpn, 0x0);
-+    for (i=0; i<4; i++)
-+        WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecTxScSa[saId].txsak[i], 0x0);
-+
-+    tmpReg |= TX_SACFG_ACTIVE;
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecTxScSa[saId].txsacs, tmpReg);
-+
-+    XX_UnlockIntrSpinlock(p_FmMacsec->txScSpinLock, intFlags);
-+
-+    return err;
-+}
-+
-+t_Error FmMacsecRxSaSetReceive(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId, bool enableReceive)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_Error     err = E_OK;
-+    uint32_t    tmpReg = 0, intFlags;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(scId < NUM_OF_RX_SC, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(saId < NUM_OF_SA_PER_RX_SC, E_INVALID_HANDLE);
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmMacsec->rxScSpinLock);
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->rxsca, scId);
-+    tmpReg = GET_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecRxScSa[saId].rxsacs);
-+    if (enableReceive)
-+        tmpReg |= RX_SACFG_EN_MASK;
-+    else
-+        tmpReg &= ~RX_SACFG_EN_MASK;
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecRxScSa[saId].rxsacs, tmpReg);
-+
-+    XX_UnlockIntrSpinlock(p_FmMacsec->rxScSpinLock, intFlags);
-+
-+    return err;
-+}
-+
-+t_Error FmMacsecRxSaUpdateNextPn(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId, uint32_t updtNextPN)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_Error     err = E_OK;
-+    uint32_t    intFlags;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(scId < NUM_OF_RX_SC, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(saId < NUM_OF_SA_PER_RX_SC, E_INVALID_HANDLE);
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmMacsec->rxScSpinLock);
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->rxsca, scId);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecRxScSa[saId].rxsanpn, updtNextPN);
-+
-+    XX_UnlockIntrSpinlock(p_FmMacsec->rxScSpinLock, intFlags);
-+
-+    return err;
-+}
-+
-+t_Error FmMacsecRxSaUpdateLowestPn(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId, uint32_t updtLowestPN)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_Error     err = E_OK;
-+    uint32_t    intFlags;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(scId < NUM_OF_RX_SC, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(saId < NUM_OF_SA_PER_RX_SC, E_INVALID_HANDLE);
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmMacsec->rxScSpinLock);
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->rxsca, scId);
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->fmMacsecRxScSa[saId].rxsalpn, updtLowestPN);
-+
-+    XX_UnlockIntrSpinlock(p_FmMacsec->rxScSpinLock, intFlags);
-+
-+    return err;
-+}
-+
-+t_Error FmMacsecTxSaSetActive(t_Handle h_FmMacsec, uint32_t scId, e_ScSaId saId, macsecAN_t an)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_Error     err = E_OK;
-+    uint32_t    tmpReg = 0, intFlags;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(scId < NUM_OF_RX_SC, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(saId < NUM_OF_SA_PER_TX_SC, E_INVALID_HANDLE);
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmMacsec->txScSpinLock);
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->txsca, scId);
-+
-+    tmpReg = GET_UINT32(p_FmMacsec->p_FmMacsecRegs->txsccfg);
-+
-+    tmpReg |= ((an << TX_SCCFG_AN_SHIFT) & TX_SCCFG_AN_MASK);
-+    tmpReg |= ((saId << TX_SCCFG_ASA_SHIFT) & TX_SCCFG_ASA_MASK);
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->txsccfg, tmpReg);
-+
-+    XX_UnlockIntrSpinlock(p_FmMacsec->txScSpinLock, intFlags);
-+
-+    return err;
-+}
-+
-+t_Error FmMacsecTxSaGetActive(t_Handle h_FmMacsec, uint32_t scId, macsecAN_t *p_An)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    t_Error     err = E_OK;
-+    uint32_t    tmpReg = 0, intFlags;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(scId < NUM_OF_RX_SC, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_An, E_INVALID_HANDLE);
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmMacsec->txScSpinLock);
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->txsca, scId);
-+
-+    tmpReg = GET_UINT32(p_FmMacsec->p_FmMacsecRegs->txsccfg);
-+
-+    XX_UnlockIntrSpinlock(p_FmMacsec->txScSpinLock, intFlags);
-+
-+    *p_An = (macsecAN_t)((tmpReg & TX_SCCFG_AN_MASK) >> TX_SCCFG_AN_SHIFT);
-+
-+    return err;
-+}
-+
-+t_Error FmMacsecSetException(t_Handle h_FmMacsec, e_FmMacsecGlobalExceptions exception, uint32_t scId, bool enable)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    uint32_t    bitMask;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    GET_EXCEPTION_FLAG(bitMask, exception, scId);
-+    if (bitMask)
-+    {
-+        if (enable)
-+            p_FmMacsec->exceptions |= bitMask;
-+        else
-+            p_FmMacsec->exceptions &= ~bitMask;
-+    }
-+    else
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Undefined exception"));
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->erer, p_FmMacsec->exceptions);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmMacsecSetEvent(t_Handle h_FmMacsec, e_FmMacsecGlobalEvents event, uint32_t scId, bool enable)
-+{
-+    t_FmMacsec  *p_FmMacsec = (t_FmMacsec*)h_FmMacsec;
-+    uint32_t    bitMask;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsec->p_FmMacsecDriverParam, E_INVALID_HANDLE);
-+
-+    GET_EVENT_FLAG(bitMask, event, scId);
-+    if (bitMask)
-+    {
-+        if (enable)
-+            p_FmMacsec->events |= bitMask;
-+        else
-+            p_FmMacsec->events &= ~bitMask;
-+    }
-+    else
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Undefined event"));
-+
-+    WRITE_UINT32(p_FmMacsec->p_FmMacsecRegs->ever, p_FmMacsec->events);
-+
-+    return E_OK;
-+}
-+
-+/****************************************/
-+/*       API Init unit functions        */
-+/****************************************/
-+t_Handle FM_MACSEC_MASTER_Config(t_FmMacsecParams *p_FmMacsecParam)
-+{
-+    t_FmMacsec  *p_FmMacsec;
-+    uint32_t    macId;
-+
-+    /* Allocate FM MACSEC structure */
-+    p_FmMacsec = (t_FmMacsec *) XX_Malloc(sizeof(t_FmMacsec));
-+    if (!p_FmMacsec)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM MACSEC driver structure"));
-+        return NULL;
-+    }
-+    memset(p_FmMacsec, 0, sizeof(t_FmMacsec));
-+    InitFmMacsecControllerDriver(&p_FmMacsec->fmMacsecControllerDriver);
-+
-+    /* Allocate the FM MACSEC driver's parameters structure */
-+    p_FmMacsec->p_FmMacsecDriverParam = (t_FmMacsecDriverParam *)XX_Malloc(sizeof(t_FmMacsecDriverParam));
-+    if (!p_FmMacsec->p_FmMacsecDriverParam)
-+    {
-+        XX_Free(p_FmMacsec);
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM MACSEC driver parameters"));
-+        return NULL;
-+    }
-+    memset(p_FmMacsec->p_FmMacsecDriverParam, 0, sizeof(t_FmMacsecDriverParam));
-+
-+    /* Initialize FM MACSEC parameters which will be kept by the driver */
-+    p_FmMacsec->h_Fm            = p_FmMacsecParam->h_Fm;
-+    p_FmMacsec->h_FmMac         = p_FmMacsecParam->nonGuestParams.h_FmMac;
-+    p_FmMacsec->p_FmMacsecRegs  = (t_FmMacsecRegs *)UINT_TO_PTR(p_FmMacsecParam->nonGuestParams.baseAddr);
-+    p_FmMacsec->f_Exception     = p_FmMacsecParam->nonGuestParams.f_Exception;
-+    p_FmMacsec->h_App           = p_FmMacsecParam->nonGuestParams.h_App;
-+    p_FmMacsec->userExceptions  = DEFAULT_userExceptions;
-+    p_FmMacsec->exceptions      = DEFAULT_exceptions;
-+    p_FmMacsec->events          = DEFAULT_events;
-+    p_FmMacsec->rxScSpinLock    = XX_InitSpinlock();
-+    p_FmMacsec->txScSpinLock    = XX_InitSpinlock();
-+
-+    /* Initialize FM MACSEC driver parameters parameters (for initialization phase only) */
-+    p_FmMacsec->p_FmMacsecDriverParam->unknownSciTreatMode                           = DEFAULT_unknownSciFrameTreatment;
-+    p_FmMacsec->p_FmMacsecDriverParam->invalidTagsDeliverUncontrolled                = DEFAULT_invalidTagsFrameTreatment;
-+    p_FmMacsec->p_FmMacsecDriverParam->encryptWithNoChangedTextDiscardUncontrolled   = DEFAULT_encryptWithNoChangedTextFrameTreatment;
-+    p_FmMacsec->p_FmMacsecDriverParam->untagTreatMode                                = DEFAULT_untagFrameTreatment;
-+    p_FmMacsec->p_FmMacsecDriverParam->keysUnreadable                                = DEFAULT_keysUnreadable;
-+    p_FmMacsec->p_FmMacsecDriverParam->reservedSc0                                   = DEFAULT_sc0ReservedForPTP;
-+    p_FmMacsec->p_FmMacsecDriverParam->byPassMode                                    = !DEFAULT_normalMode;
-+    p_FmMacsec->p_FmMacsecDriverParam->pnExhThr                                      = DEFAULT_pnExhThr;
-+    p_FmMacsec->p_FmMacsecDriverParam->sectagOverhead                                = DEFAULT_sectagOverhead;
-+    p_FmMacsec->p_FmMacsecDriverParam->mflSubtract                                   = DEFAULT_mflSubtract;
-+    /* build the FM MACSEC master IPC address */
-+    memset(p_FmMacsec->fmMacsecModuleName, 0, (sizeof(char))*MODULE_NAME_SIZE);
-+    FM_MAC_GetId(p_FmMacsec->h_FmMac,&macId);
-+    if (Sprint (p_FmMacsec->fmMacsecModuleName, "FM-%d-MAC-%d-MACSEC-Master",
-+        FmGetId(p_FmMacsec->h_Fm),macId) != 24)
-+    {
-+        XX_Free(p_FmMacsec->p_FmMacsecDriverParam);
-+        XX_Free(p_FmMacsec);
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Sprint failed"));
-+        return NULL;
-+    }
-+    return p_FmMacsec;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/fm_macsec_master.h
-@@ -0,0 +1,479 @@
-+/*
-+ * Copyright 2008-2015 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/******************************************************************************
-+ @File          fm_macsec_master.h
-+
-+ @Description   FM MACSEC internal structures and definitions.
-+*//***************************************************************************/
-+#ifndef __FM_MACSEC_MASTER_H
-+#define __FM_MACSEC_MASTER_H
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+
-+#include "fm_macsec.h"
-+
-+
-+#define MACSEC_ICV_SIZE             16
-+#define MACSEC_SECTAG_SIZE          16
-+#define MACSEC_SCI_SIZE             8
-+#define MACSEC_FCS_SIZE             4
-+
-+/**************************************************************************//**
-+ @Description       Exceptions
-+*//***************************************************************************/
-+
-+#define FM_MACSEC_EX_TX_SC_0       0x80000000
-+#define FM_MACSEC_EX_TX_SC(sc)     (FM_MACSEC_EX_TX_SC_0 >> (sc))
-+#define FM_MACSEC_EX_ECC           0x00000001
-+
-+#define GET_EXCEPTION_FLAG(bitMask, exception, id)  switch (exception){     \
-+    case e_FM_MACSEC_EX_TX_SC:                                              \
-+        bitMask = FM_MACSEC_EX_TX_SC(id); break;                            \
-+    case e_FM_MACSEC_EX_ECC:                                                \
-+        bitMask = FM_MACSEC_EX_ECC; break;                                  \
-+    default: bitMask = 0;break;}
-+
-+#define FM_MACSEC_USER_EX_SINGLE_BIT_ECC            0x80000000
-+#define FM_MACSEC_USER_EX_MULTI_BIT_ECC             0x40000000
-+
-+#define GET_USER_EXCEPTION_FLAG(bitMask, exception)     switch (exception){ \
-+    case e_FM_MACSEC_EX_SINGLE_BIT_ECC:                                     \
-+        bitMask = FM_MACSEC_USER_EX_SINGLE_BIT_ECC; break;                  \
-+    case e_FM_MACSEC_EX_MULTI_BIT_ECC:                                      \
-+        bitMask = FM_MACSEC_USER_EX_MULTI_BIT_ECC; break;                   \
-+    default: bitMask = 0;break;}
-+
-+/**************************************************************************//**
-+ @Description       Events
-+*//***************************************************************************/
-+
-+#define FM_MACSEC_EV_TX_SC_0_NEXT_PN                  0x80000000
-+#define FM_MACSEC_EV_TX_SC_NEXT_PN(sc)                (FM_MACSEC_EV_TX_SC_0_NEXT_PN >> (sc))
-+
-+#define GET_EVENT_FLAG(bitMask, event, id)      switch (event){     \
-+    case e_FM_MACSEC_EV_TX_SC_NEXT_PN:                              \
-+        bitMask = FM_MACSEC_EV_TX_SC_NEXT_PN(id); break;            \
-+    default: bitMask = 0;break;}
-+
-+/**************************************************************************//**
-+ @Description       Defaults
-+*//***************************************************************************/
-+#define DEFAULT_userExceptions              (FM_MACSEC_USER_EX_SINGLE_BIT_ECC     |\
-+                                            FM_MACSEC_USER_EX_MULTI_BIT_ECC)
-+
-+#define DEFAULT_exceptions                  (FM_MACSEC_EX_TX_SC(0)     |\
-+                                            FM_MACSEC_EX_TX_SC(1)      |\
-+                                            FM_MACSEC_EX_TX_SC(2)      |\
-+                                            FM_MACSEC_EX_TX_SC(3)      |\
-+                                            FM_MACSEC_EX_TX_SC(4)      |\
-+                                            FM_MACSEC_EX_TX_SC(5)      |\
-+                                            FM_MACSEC_EX_TX_SC(6)      |\
-+                                            FM_MACSEC_EX_TX_SC(7)      |\
-+                                            FM_MACSEC_EX_TX_SC(8)      |\
-+                                            FM_MACSEC_EX_TX_SC(9)      |\
-+                                            FM_MACSEC_EX_TX_SC(10)     |\
-+                                            FM_MACSEC_EX_TX_SC(11)     |\
-+                                            FM_MACSEC_EX_TX_SC(12)     |\
-+                                            FM_MACSEC_EX_TX_SC(13)     |\
-+                                            FM_MACSEC_EX_TX_SC(14)     |\
-+                                            FM_MACSEC_EX_TX_SC(15)     |\
-+                                            FM_MACSEC_EX_ECC          )
-+
-+#define DEFAULT_events                      (FM_MACSEC_EV_TX_SC_NEXT_PN(0)   |\
-+                                            FM_MACSEC_EV_TX_SC_NEXT_PN(1)    |\
-+                                            FM_MACSEC_EV_TX_SC_NEXT_PN(2)    |\
-+                                            FM_MACSEC_EV_TX_SC_NEXT_PN(3)    |\
-+                                            FM_MACSEC_EV_TX_SC_NEXT_PN(4)    |\
-+                                            FM_MACSEC_EV_TX_SC_NEXT_PN(5)    |\
-+                                            FM_MACSEC_EV_TX_SC_NEXT_PN(6)    |\
-+                                            FM_MACSEC_EV_TX_SC_NEXT_PN(7)    |\
-+                                            FM_MACSEC_EV_TX_SC_NEXT_PN(8)    |\
-+                                            FM_MACSEC_EV_TX_SC_NEXT_PN(9)    |\
-+                                            FM_MACSEC_EV_TX_SC_NEXT_PN(10)   |\
-+                                            FM_MACSEC_EV_TX_SC_NEXT_PN(11)   |\
-+                                            FM_MACSEC_EV_TX_SC_NEXT_PN(12)   |\
-+                                            FM_MACSEC_EV_TX_SC_NEXT_PN(13)   |\
-+                                            FM_MACSEC_EV_TX_SC_NEXT_PN(14)   |\
-+                                            FM_MACSEC_EV_TX_SC_NEXT_PN(15)   )
-+
-+#define DEFAULT_unknownSciFrameTreatment                e_FM_MACSEC_UNKNOWN_SCI_FRAME_TREATMENT_DISCARD_BOTH
-+#define DEFAULT_invalidTagsFrameTreatment               FALSE
-+#define DEFAULT_encryptWithNoChangedTextFrameTreatment  FALSE
-+#define DEFAULT_untagFrameTreatment                     e_FM_MACSEC_UNTAG_FRAME_TREATMENT_DELIVER_UNCONTROLLED_DISCARD_CONTROLLED
-+#define DEFAULT_changedTextWithNoEncryptFrameTreatment  FALSE
-+#define DEFAULT_onlyScbIsSetFrameTreatment              FALSE
-+#define DEFAULT_keysUnreadable                          FALSE
-+#define DEFAULT_normalMode                              TRUE
-+#define DEFAULT_sc0ReservedForPTP                       FALSE
-+#define DEFAULT_initNextPn                              1
-+#define DEFAULT_pnExhThr                                0xffffffff
-+#define DEFAULT_sectagOverhead                          (MACSEC_ICV_SIZE + MACSEC_SECTAG_SIZE)
-+#define DEFAULT_mflSubtract                             MACSEC_FCS_SIZE
-+
-+
-+/**************************************************************************//**
-+ @Description       Memory Mapped Registers
-+*//***************************************************************************/
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(push,1)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+typedef _Packed struct
-+{
-+    /* MACsec configuration */
-+    volatile uint32_t   cfg;            /**< MACsec configuration */
-+    volatile uint32_t   et;             /**< MACsec EtherType */
-+    volatile uint8_t    res1[56];       /**< reserved */
-+    volatile uint32_t   mfl;            /**< Maximum Frame Length */
-+    volatile uint32_t   tpnet;          /**< TX Packet Number exhaustion threshold */
-+    volatile uint8_t    res2[56];       /**< reserved */
-+    volatile uint32_t   rxsca;          /**< RX SC access select */
-+    volatile uint8_t    res3[60];       /**< reserved */
-+    volatile uint32_t   txsca;          /**< TX SC access select */
-+    volatile uint8_t    res4[60];       /**< reserved */
-+
-+    /* RX configuration, status and statistic */
-+    volatile uint32_t   rxsci1h;        /**< RX Secure Channel Identifier first half */
-+    volatile uint32_t   rxsci2h;        /**< RX Secure Channel Identifier second half */
-+    volatile uint8_t    res5[8];        /**< reserved */
-+    volatile uint32_t   ifio1hs;        /**< ifInOctets first half Statistic */
-+    volatile uint32_t   ifio2hs;        /**< ifInOctets second half Statistic */
-+    volatile uint32_t   ifiups;         /**< ifInUcastPkts Statistic */
-+    volatile uint8_t    res6[4];        /**< reserved */
-+    volatile uint32_t   ifimps;         /**< ifInMulticastPkts Statistic */
-+    volatile uint32_t   ifibps;         /**< ifInBroadcastPkts Statistic */
-+    volatile uint32_t   rxsccfg;        /**< RX Secure Channel configuration */
-+    volatile uint32_t   rpw;            /**< replayWindow */
-+    volatile uint8_t    res7[16];       /**< reserved */
-+    volatile uint32_t   inov1hs;        /**< InOctetsValidated first half Statistic */
-+    volatile uint32_t   inov2hs;        /**< InOctetsValidated second half Statistic */
-+    volatile uint32_t   inod1hs;        /**< InOctetsDecrypted first half Statistic */
-+    volatile uint32_t   inod2hs;        /**< InOctetsDecrypted second half Statistic */
-+    volatile uint32_t   rxscipus;       /**< RX Secure Channel InPktsUnchecked Statistic */
-+    volatile uint32_t   rxscipds;       /**< RX Secure Channel InPktsDelayed Statistic */
-+    volatile uint32_t   rxscipls;       /**< RX Secure Channel InPktsLate Statistic */
-+    volatile uint8_t    res8[4];        /**< reserved */
-+    volatile uint32_t   rxaninuss[MAX_NUM_OF_SA_PER_SC];   /**< RX AN 0-3 InNotUsingSA Statistic */
-+    volatile uint32_t   rxanipuss[MAX_NUM_OF_SA_PER_SC];   /**< RX AN 0-3 InPktsUnusedSA Statistic */
-+    _Packed struct
-+    {
-+        volatile uint32_t   rxsacs;     /**< RX Security Association configuration and status */
-+        volatile uint32_t   rxsanpn;    /**< RX Security Association nextPN */
-+        volatile uint32_t   rxsalpn;    /**< RX Security Association lowestPN */
-+        volatile uint32_t   rxsaipos;   /**< RX Security Association InPktsOK Statistic */
-+        volatile uint32_t   rxsak[4];   /**< RX Security Association key (128 bit) */
-+        volatile uint32_t   rxsah[4];   /**< RX Security Association hash (128 bit) */
-+        volatile uint32_t   rxsaipis;   /**< RX Security Association InPktsInvalid Statistic */
-+        volatile uint32_t   rxsaipnvs;  /**< RX Security Association InPktsNotValid Statistic */
-+        volatile uint8_t    res9[8];    /**< reserved */
-+    } _PackedType fmMacsecRxScSa[NUM_OF_SA_PER_RX_SC];
-+
-+    /* TX configuration, status and statistic */
-+    volatile uint32_t   txsci1h;        /**< TX Secure Channel Identifier first half */
-+    volatile uint32_t   txsci2h;        /**< TX Secure Channel Identifier second half */
-+    volatile uint8_t    res10[8];        /**< reserved */
-+    volatile uint32_t   ifoo1hs;        /**< ifOutOctets first half Statistic */
-+    volatile uint32_t   ifoo2hs;        /**< ifOutOctets second half Statistic */
-+    volatile uint32_t   ifoups;         /**< ifOutUcastPkts Statistic */
-+    volatile uint32_t   opus;           /**< OutPktsUntagged Statistic */
-+    volatile uint32_t   ifomps;         /**< ifOutMulticastPkts Statistic */
-+    volatile uint32_t   ifobps;         /**< ifOutBroadcastPkts Statistic */
-+    volatile uint32_t   txsccfg;        /**< TX Secure Channel configuration */
-+    volatile uint32_t   optls;          /**< OutPktsTooLong Statistic */
-+    volatile uint8_t    res11[16];      /**< reserved */
-+    volatile uint32_t   oop1hs;         /**< OutOctetsProtected first half Statistic */
-+    volatile uint32_t   oop2hs;         /**< OutOctetsProtected second half Statistic */
-+    volatile uint32_t   ooe1hs;         /**< OutOctetsEncrypted first half Statistic */
-+    volatile uint32_t   ooe2hs;         /**< OutOctetsEncrypted second half Statistic */
-+    volatile uint8_t    res12[48];      /**< reserved */
-+    _Packed struct
-+    {
-+        volatile uint32_t   txsacs;     /**< TX Security Association configuration and status */
-+        volatile uint32_t   txsanpn;    /**< TX Security Association nextPN */
-+        volatile uint32_t   txsaopps;   /**< TX Security Association OutPktsProtected Statistic */
-+        volatile uint32_t   txsaopes;   /**< TX Security Association OutPktsEncrypted Statistic */
-+        volatile uint32_t   txsak[4];   /**< TX Security Association key (128 bit) */
-+        volatile uint32_t   txsah[4];   /**< TX Security Association hash (128 bit) */
-+        volatile uint8_t    res13[16];  /**< reserved */
-+    } _PackedType fmMacsecTxScSa[NUM_OF_SA_PER_TX_SC];
-+    volatile uint8_t    res14[248];     /**< reserved */
-+
-+    /* Global configuration and status */
-+    volatile uint32_t   ip_rev1;        /**< MACsec IP Block Revision 1 register */
-+    volatile uint32_t   ip_rev2;        /**< MACsec IP Block Revision 2 register */
-+    volatile uint32_t   evr;            /**< MACsec Event Register */
-+    volatile uint32_t   ever;           /**< MACsec Event Enable Register */
-+    volatile uint32_t   evfr;           /**< MACsec Event Force Register */
-+    volatile uint32_t   err;            /**< MACsec Error Register */
-+    volatile uint32_t   erer;           /**< MACsec Error Enable Register */
-+    volatile uint32_t   erfr;           /**< MACsec Error Force Register */
-+    volatile uint8_t    res15[40];      /**< reserved */
-+    volatile uint32_t   meec;           /**< MACsec Memory ECC Error Capture Register */
-+    volatile uint32_t   idle;           /**< MACsec Idle status Register */
-+    volatile uint8_t    res16[184];     /**< reserved */
-+    /* DEBUG */
-+    volatile uint32_t   rxec;           /**< MACsec RX error capture Register */
-+    volatile uint8_t    res17[28];      /**< reserved */
-+    volatile uint32_t   txec;           /**< MACsec TX error capture Register */
-+    volatile uint8_t    res18[220];     /**< reserved */
-+
-+    /* Macsec Rx global statistic */
-+    volatile uint32_t   ifiocp1hs;      /**< ifInOctetsCp first half Statistic */
-+    volatile uint32_t   ifiocp2hs;      /**< ifInOctetsCp second half Statistic */
-+    volatile uint32_t   ifiupcps;       /**< ifInUcastPktsCp Statistic */
-+    volatile uint8_t    res19[4];       /**< reserved */
-+    volatile uint32_t   ifioup1hs;      /**< ifInOctetsUp first half Statistic */
-+    volatile uint32_t   ifioup2hs;      /**< ifInOctetsUp second half Statistic */
-+    volatile uint32_t   ifiupups;       /**< ifInUcastPktsUp Statistic */
-+    volatile uint8_t    res20[4];       /**< reserved */
-+    volatile uint32_t   ifimpcps;       /**< ifInMulticastPktsCp Statistic */
-+    volatile uint32_t   ifibpcps;       /**< ifInBroadcastPktsCp Statistic */
-+    volatile uint32_t   ifimpups;       /**< ifInMulticastPktsUp Statistic */
-+    volatile uint32_t   ifibpups;       /**< ifInBroadcastPktsUp Statistic */
-+    volatile uint32_t   ipwts;          /**< InPktsWithoutTag Statistic */
-+    volatile uint32_t   ipkays;         /**< InPktsKaY Statistic */
-+    volatile uint32_t   ipbts;          /**< InPktsBadTag Statistic */
-+    volatile uint32_t   ipsnfs;         /**< InPktsSCINotFound Statistic */
-+    volatile uint32_t   ipuecs;         /**< InPktsUnsupportedEC Statistic */
-+    volatile uint32_t   ipescbs;        /**< InPktsEponSingleCopyBroadcast Statistic */
-+    volatile uint32_t   iptls;          /**< InPktsTooLong Statistic */
-+    volatile uint8_t    res21[52];      /**< reserved */
-+
-+    /* Macsec Tx global statistic */
-+    volatile uint32_t   opds;           /**< OutPktsDiscarded Statistic */
-+#if (DPAA_VERSION >= 11)
-+    volatile uint8_t    res22[124];     /**< reserved */
-+    _Packed struct
-+    {
-+        volatile uint32_t   rxsak[8];   /**< RX Security Association key (128/256 bit) */
-+        volatile uint8_t    res23[32];  /**< reserved */
-+    } _PackedType rxScSaKey[NUM_OF_SA_PER_RX_SC];
-+    _Packed struct
-+    {
-+        volatile uint32_t   txsak[8];   /**< TX Security Association key (128/256 bit) */
-+        volatile uint8_t    res24[32];  /**< reserved */
-+    } _PackedType txScSaKey[NUM_OF_SA_PER_TX_SC];
-+#endif /* (DPAA_VERSION >= 11) */
-+} _PackedType t_FmMacsecRegs;
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+
-+/**************************************************************************//**
-+ @Description       General defines
-+*//***************************************************************************/
-+
-+#define SCI_HIGH_MASK   0xffffffff00000000LL
-+#define SCI_LOW_MASK    0x00000000ffffffffLL
-+
-+#define LONG_SHIFT      32
-+
-+#define GET_SCI_FIRST_HALF(sci)     (uint32_t)((macsecSCI_t)((macsecSCI_t)(sci) & SCI_HIGH_MASK) >> LONG_SHIFT)
-+#define GET_SCI_SECOND_HALF(sci)    (uint32_t)((macsecSCI_t)(sci) & SCI_LOW_MASK)
-+
-+/**************************************************************************//**
-+ @Description       Configuration defines
-+*//***************************************************************************/
-+
-+/* masks */
-+#define CFG_UECT                        0x00000800
-+#define CFG_ESCBT                       0x00000400
-+#define CFG_USFT                        0x00000300
-+#define CFG_ITT                         0x00000080
-+#define CFG_KFT                         0x00000040
-+#define CFG_UFT                         0x00000030
-+#define CFG_KSS                         0x00000004
-+#define CFG_BYPN                        0x00000002
-+#define CFG_S0I                         0x00000001
-+
-+#define ET_TYPE                         0x0000ffff
-+
-+#define MFL_MAX_LEN                     0x0000ffff
-+
-+#define RXSCA_SC_SEL                    0x0000000f
-+
-+#define TXSCA_SC_SEL                    0x0000000f
-+
-+#define IP_REV_1_IP_ID                  0xffff0000
-+#define IP_REV_1_IP_MJ                  0x0000ff00
-+#define IP_REV_1_IP_MM                  0x000000ff
-+
-+#define IP_REV_2_IP_INT                 0x00ff0000
-+#define IP_REV_2_IP_ERR                 0x0000ff00
-+#define IP_REV_2_IP_CFG                 0x000000ff
-+
-+#define MECC_CAP                        0x80000000
-+#define MECC_CET                        0x40000000
-+#define MECC_SERCNT                     0x00ff0000
-+#define MECC_MEMADDR                    0x000001ff
-+
-+/* shifts */
-+#define CFG_UECT_SHIFT                  (31-20)
-+#define CFG_ESCBT_SHIFT                 (31-21)
-+#define CFG_USFT_SHIFT                  (31-23)
-+#define CFG_ITT_SHIFT                   (31-24)
-+#define CFG_KFT_SHIFT                   (31-25)
-+#define CFG_UFT_SHIFT                   (31-27)
-+#define CFG_KSS_SHIFT                   (31-29)
-+#define CFG_BYPN_SHIFT                  (31-30)
-+#define CFG_S0I_SHIFT                   (31-31)
-+
-+#define IP_REV_1_IP_ID_SHIFT            (31-15)
-+#define IP_REV_1_IP_MJ_SHIFT            (31-23)
-+#define IP_REV_1_IP_MM_SHIFT            (31-31)
-+
-+#define IP_REV_2_IP_INT_SHIFT           (31-15)
-+#define IP_REV_2_IP_ERR_SHIFT           (31-23)
-+#define IP_REV_2_IP_CFG_SHIFT           (31-31)
-+
-+#define MECC_CAP_SHIFT                  (31-0)
-+#define MECC_CET_SHIFT                  (31-1)
-+#define MECC_SERCNT_SHIFT               (31-15)
-+#define MECC_MEMADDR_SHIFT              (31-31)
-+
-+/**************************************************************************//**
-+ @Description       RX SC defines
-+*//***************************************************************************/
-+
-+/* masks */
-+#define RX_SCCFG_SCI_EN_MASK            0x00000800
-+#define RX_SCCFG_RP_MASK                0x00000400
-+#define RX_SCCFG_VF_MASK                0x00000300
-+#define RX_SCCFG_CO_MASK                0x0000003f
-+
-+/* shifts */
-+#define RX_SCCFG_SCI_EN_SHIFT           (31-20)
-+#define RX_SCCFG_RP_SHIFT               (31-21)
-+#define RX_SCCFG_VF_SHIFT               (31-23)
-+#define RX_SCCFG_CO_SHIFT               (31-31)
-+#define RX_SCCFG_CS_SHIFT               (31-7)
-+
-+/**************************************************************************//**
-+ @Description       RX SA defines
-+*//***************************************************************************/
-+
-+/* masks */
-+#define RX_SACFG_ACTIVE                 0x80000000
-+#define RX_SACFG_AN_MASK                0x00000006
-+#define RX_SACFG_EN_MASK                0x00000001
-+
-+/* shifts */
-+#define RX_SACFG_AN_SHIFT               (31-30)
-+#define RX_SACFG_EN_SHIFT               (31-31)
-+
-+/**************************************************************************//**
-+ @Description       TX SC defines
-+*//***************************************************************************/
-+
-+/* masks */
-+#define TX_SCCFG_AN_MASK                0x000c0000
-+#define TX_SCCFG_ASA_MASK               0x00020000
-+#define TX_SCCFG_SCE_MASK               0x00010000
-+#define TX_SCCFG_CO_MASK                0x00003f00
-+#define TX_SCCFG_CE_MASK                0x00000010
-+#define TX_SCCFG_PF_MASK                0x00000008
-+#define TX_SCCFG_AIS_MASK               0x00000004
-+#define TX_SCCFG_UES_MASK               0x00000002
-+#define TX_SCCFG_USCB_MASK              0x00000001
-+
-+/* shifts */
-+#define TX_SCCFG_AN_SHIFT               (31-13)
-+#define TX_SCCFG_ASA_SHIFT              (31-14)
-+#define TX_SCCFG_SCE_SHIFT              (31-15)
-+#define TX_SCCFG_CO_SHIFT               (31-23)
-+#define TX_SCCFG_CE_SHIFT               (31-27)
-+#define TX_SCCFG_PF_SHIFT               (31-28)
-+#define TX_SCCFG_AIS_SHIFT              (31-29)
-+#define TX_SCCFG_UES_SHIFT              (31-30)
-+#define TX_SCCFG_USCB_SHIFT             (31-31)
-+#define TX_SCCFG_CS_SHIFT               (31-7)
-+
-+/**************************************************************************//**
-+ @Description       TX SA defines
-+*//***************************************************************************/
-+
-+/* masks */
-+#define TX_SACFG_ACTIVE                 0x80000000
-+
-+
-+typedef struct
-+{
-+    void        (*f_Isr) (t_Handle h_Arg, uint32_t id);
-+    t_Handle    h_SrcHandle;
-+} t_FmMacsecIntrSrc;
-+
-+typedef struct
-+{
-+    e_FmMacsecUnknownSciFrameTreatment  unknownSciTreatMode;
-+    bool                                invalidTagsDeliverUncontrolled;
-+    bool                                changedTextWithNoEncryptDeliverUncontrolled;
-+    bool                                onlyScbIsSetDeliverUncontrolled;
-+    bool                                encryptWithNoChangedTextDiscardUncontrolled;
-+    e_FmMacsecUntagFrameTreatment       untagTreatMode;
-+    uint32_t                            pnExhThr;
-+    bool                                keysUnreadable;
-+    bool                                byPassMode;
-+    bool                                reservedSc0;
-+    uint32_t                            sectagOverhead;
-+    uint32_t                            mflSubtract;
-+} t_FmMacsecDriverParam;
-+
-+typedef struct
-+{
-+    t_FmMacsecControllerDriver      fmMacsecControllerDriver;
-+    t_Handle                        h_Fm;
-+    t_FmMacsecRegs                  *p_FmMacsecRegs;
-+    t_Handle                        h_FmMac;            /**< A handle to the FM MAC object  related to */
-+    char                            fmMacsecModuleName[MODULE_NAME_SIZE];
-+    t_FmMacsecIntrSrc               intrMng[NUM_OF_INTER_MODULE_EVENTS];
-+    uint32_t                        events;
-+    uint32_t                        exceptions;
-+    uint32_t                        userExceptions;
-+    t_FmMacsecExceptionsCallback    *f_Exception;       /**< Exception Callback Routine         */
-+    t_Handle                        h_App;              /**< A handle to an application layer object; This handle will
-+                                                             be passed by the driver upon calling the above callbacks */
-+    bool                            rxScTable[NUM_OF_RX_SC];
-+    uint32_t                        numRxScAvailable;
-+    bool                            txScTable[NUM_OF_TX_SC];
-+    uint32_t                        numTxScAvailable;
-+    t_Handle                        rxScSpinLock;
-+    t_Handle                        txScSpinLock;
-+    t_FmMacsecDriverParam           *p_FmMacsecDriverParam;
-+} t_FmMacsec;
-+
-+
-+#endif /* __FM_MACSEC_MASTER_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/fm_macsec_secy.c
-@@ -0,0 +1,883 @@
-+/*
-+ * Copyright 2008-2015 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/******************************************************************************
-+ @File          fm_macsec_secy.c
-+
-+ @Description   FM MACSEC SECY driver routines implementation.
-+*//***************************************************************************/
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "xx_ext.h"
-+#include "string_ext.h"
-+#include "sprint_ext.h"
-+
-+#include "fm_macsec_secy.h"
-+
-+
-+/****************************************/
-+/*       static functions               */
-+/****************************************/
-+static void FmMacsecSecYExceptionsIsr(t_Handle h_FmMacsecSecY, uint32_t id)
-+{
-+    t_FmMacsecSecY *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+
-+    UNUSED(id);
-+    SANITY_CHECK_RETURN(p_FmMacsecSecY, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecSecY->exceptions & FM_MACSEC_SECY_EX_FRAME_DISCARDED)
-+        p_FmMacsecSecY->f_Exception(p_FmMacsecSecY->h_App, e_FM_MACSEC_SECY_EX_FRAME_DISCARDED);
-+}
-+
-+static void FmMacsecSecYEventsIsr(t_Handle h_FmMacsecSecY, uint32_t id)
-+{
-+    t_FmMacsecSecY *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+
-+    UNUSED(id);
-+    SANITY_CHECK_RETURN(p_FmMacsecSecY, E_INVALID_HANDLE);
-+
-+    if (p_FmMacsecSecY->events & FM_MACSEC_SECY_EV_NEXT_PN)
-+        p_FmMacsecSecY->f_Event(p_FmMacsecSecY->h_App, e_FM_MACSEC_SECY_EV_NEXT_PN);
-+}
-+
-+static t_Error CheckFmMacsecSecYParameters(t_FmMacsecSecY *p_FmMacsecSecY)
-+{
-+    if (!p_FmMacsecSecY->f_Exception)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Exceptions callback not provided"));
-+
-+    if (!p_FmMacsecSecY->f_Event)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Events callback not provided"));
-+
-+    if (!p_FmMacsecSecY->numOfRxSc)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Num of Rx Scs must be greater than '0'"));
-+
-+
-+    return E_OK;
-+}
-+
-+static t_Handle FmMacsecSecYCreateSc(t_FmMacsecSecY             *p_FmMacsecSecY,
-+                                     macsecSCI_t                sci,
-+                                     e_FmMacsecSecYCipherSuite  cipherSuite,
-+                                     e_ScType                   type)
-+{
-+    t_SecYSc        *p_ScTable;
-+    void            *p_Params;
-+    uint32_t        numOfSc,i;
-+    t_Error         err = E_OK;
-+    t_RxScParams    rxScParams;
-+    t_TxScParams    txScParams;
-+
-+    ASSERT_COND(p_FmMacsecSecY);
-+    ASSERT_COND(p_FmMacsecSecY->h_FmMacsec);
-+
-+    if (type == e_SC_RX)
-+    {
-+        memset(&rxScParams, 0, sizeof(rxScParams));
-+        i                                   = (NUM_OF_RX_SC - 1);
-+        p_ScTable                           = p_FmMacsecSecY->p_RxSc;
-+        numOfSc                             = p_FmMacsecSecY->numOfRxSc;
-+        rxScParams.confidentialityOffset    = p_FmMacsecSecY->confidentialityOffset;
-+        rxScParams.replayProtect            = p_FmMacsecSecY->replayProtect;
-+        rxScParams.replayWindow             = p_FmMacsecSecY->replayWindow;
-+        rxScParams.validateFrames           = p_FmMacsecSecY->validateFrames;
-+        rxScParams.cipherSuite              = cipherSuite;
-+        p_Params = &rxScParams;
-+    }
-+    else
-+    {
-+        memset(&txScParams, 0, sizeof(txScParams));
-+        i                                   = (NUM_OF_TX_SC - 1);
-+        p_ScTable                           = p_FmMacsecSecY->p_TxSc;
-+        numOfSc                             = p_FmMacsecSecY->numOfTxSc;
-+        txScParams.sciInsertionMode         = p_FmMacsecSecY->sciInsertionMode;
-+        txScParams.protectFrames            = p_FmMacsecSecY->protectFrames;
-+        txScParams.confidentialityEnable    = p_FmMacsecSecY->confidentialityEnable;
-+        txScParams.confidentialityOffset    = p_FmMacsecSecY->confidentialityOffset;
-+        txScParams.cipherSuite              = cipherSuite;
-+        p_Params = &txScParams;
-+    }
-+
-+    for (i=0;i<numOfSc;i++)
-+        if (!p_ScTable[i].inUse)
-+            break;
-+    if (i == numOfSc)
-+    {
-+        REPORT_ERROR(MAJOR, E_FULL, ("FM MACSEC SECY SC"));
-+        return NULL;
-+    }
-+
-+    if (type == e_SC_RX)
-+    {
-+        ((t_RxScParams *)p_Params)->scId = p_ScTable[i].scId;
-+        ((t_RxScParams *)p_Params)->sci  = sci;
-+        if ((err = FmMacsecCreateRxSc(p_FmMacsecSecY->h_FmMacsec, (t_RxScParams *)p_Params)) != E_OK)
-+        {
-+            REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM MACSEC SECY RX SC"));
-+            return NULL;
-+        }
-+    }
-+    else
-+    {
-+        ((t_TxScParams *)p_Params)->scId = p_ScTable[i].scId;
-+        ((t_TxScParams *)p_Params)->sci  = sci;
-+        if ((err = FmMacsecCreateTxSc(p_FmMacsecSecY->h_FmMacsec, (t_TxScParams *)p_Params)) != E_OK)
-+        {
-+            REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM MACSEC SECY TX SC"));
-+            return NULL;
-+        }
-+    }
-+
-+    p_ScTable[i].inUse = TRUE;
-+    return &p_ScTable[i];
-+}
-+
-+static t_Error FmMacsecSecYDeleteSc(t_FmMacsecSecY *p_FmMacsecSecY, t_SecYSc *p_FmSecYSc, e_ScType type)
-+{
-+    t_Error         err = E_OK;
-+
-+    ASSERT_COND(p_FmMacsecSecY);
-+    ASSERT_COND(p_FmMacsecSecY->h_FmMacsec);
-+    ASSERT_COND(p_FmSecYSc);
-+
-+    if (type == e_SC_RX)
-+    {
-+        if ((err = FmMacsecDeleteRxSc(p_FmMacsecSecY->h_FmMacsec, p_FmSecYSc->scId)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+    else
-+        if ((err = FmMacsecDeleteTxSc(p_FmMacsecSecY->h_FmMacsec, p_FmSecYSc->scId)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    p_FmSecYSc->inUse = FALSE;
-+
-+    return err;
-+}
-+
-+/****************************************/
-+/*       API Init unit functions        */
-+/****************************************/
-+t_Handle FM_MACSEC_SECY_Config(t_FmMacsecSecYParams *p_FmMacsecSecYParam)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY;
-+
-+    /* Allocate FM MACSEC structure */
-+    p_FmMacsecSecY = (t_FmMacsecSecY *) XX_Malloc(sizeof(t_FmMacsecSecY));
-+    if (!p_FmMacsecSecY)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM MACSEC SECY driver structure"));
-+        return NULL;
-+    }
-+    memset(p_FmMacsecSecY, 0, sizeof(t_FmMacsecSecY));
-+
-+    /* Allocate the FM MACSEC driver's parameters structure */
-+    p_FmMacsecSecY->p_FmMacsecSecYDriverParam = (t_FmMacsecSecYDriverParam *)XX_Malloc(sizeof(t_FmMacsecSecYDriverParam));
-+    if (!p_FmMacsecSecY->p_FmMacsecSecYDriverParam)
-+    {
-+        XX_Free(p_FmMacsecSecY);
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM MACSEC SECY driver parameters"));
-+        return NULL;
-+    }
-+    memset(p_FmMacsecSecY->p_FmMacsecSecYDriverParam, 0, sizeof(t_FmMacsecSecYDriverParam));
-+
-+    /* Initialize FM MACSEC SECY parameters which will be kept by the driver */
-+    p_FmMacsecSecY->h_FmMacsec              = p_FmMacsecSecYParam->h_FmMacsec;
-+    p_FmMacsecSecY->f_Event                 = p_FmMacsecSecYParam->f_Event;
-+    p_FmMacsecSecY->f_Exception             = p_FmMacsecSecYParam->f_Exception;
-+    p_FmMacsecSecY->h_App                   = p_FmMacsecSecYParam->h_App;
-+    p_FmMacsecSecY->confidentialityEnable   = DEFAULT_confidentialityEnable;
-+    p_FmMacsecSecY->confidentialityOffset   = DEFAULT_confidentialityOffset;
-+    p_FmMacsecSecY->validateFrames          = DEFAULT_validateFrames;
-+    p_FmMacsecSecY->replayProtect           = DEFAULT_replayEnable;
-+    p_FmMacsecSecY->replayWindow            = DEFAULT_replayWindow;
-+    p_FmMacsecSecY->protectFrames           = DEFAULT_protectFrames;
-+    p_FmMacsecSecY->sciInsertionMode        = DEFAULT_sciInsertionMode;
-+    p_FmMacsecSecY->isPointToPoint          = DEFAULT_ptp;
-+    p_FmMacsecSecY->numOfRxSc               = p_FmMacsecSecYParam->numReceiveChannels;
-+    p_FmMacsecSecY->numOfTxSc               = DEFAULT_numOfTxSc;
-+    p_FmMacsecSecY->exceptions              = DEFAULT_exceptions;
-+    p_FmMacsecSecY->events                  = DEFAULT_events;
-+
-+    memcpy(&p_FmMacsecSecY->p_FmMacsecSecYDriverParam->txScParams,
-+           &p_FmMacsecSecYParam->txScParams,
-+           sizeof(t_FmMacsecSecYSCParams));
-+    return p_FmMacsecSecY;
-+}
-+
-+t_Error FM_MACSEC_SECY_Init(t_Handle h_FmMacsecSecY)
-+{
-+    t_FmMacsecSecY              *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_FmMacsecSecYDriverParam   *p_FmMacsecSecYDriverParam = NULL;
-+    uint32_t                    rxScIds[NUM_OF_RX_SC], txScIds[NUM_OF_TX_SC], i, j;
-+    t_Error                     err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_HANDLE);
-+
-+    CHECK_INIT_PARAMETERS(p_FmMacsecSecY, CheckFmMacsecSecYParameters);
-+
-+    p_FmMacsecSecYDriverParam = p_FmMacsecSecY->p_FmMacsecSecYDriverParam;
-+
-+    if ((p_FmMacsecSecY->isPointToPoint) &&
-+        ((err = FmMacsecSetPTP(p_FmMacsecSecY->h_FmMacsec, TRUE)) != E_OK))
-+        RETURN_ERROR(MAJOR, err, ("Can't set Poin-to-Point"));
-+
-+    /* Rx Sc Allocation */
-+    p_FmMacsecSecY->p_RxSc = (t_SecYSc *)XX_Malloc(sizeof(t_SecYSc) * p_FmMacsecSecY->numOfRxSc);
-+    if (!p_FmMacsecSecY->p_RxSc)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("FM MACSEC SECY RX SC"));
-+    memset(p_FmMacsecSecY->p_RxSc, 0, sizeof(t_SecYSc) * p_FmMacsecSecY->numOfRxSc);
-+    if ((err = FmMacsecAllocScs(p_FmMacsecSecY->h_FmMacsec, e_SC_RX, p_FmMacsecSecY->isPointToPoint, p_FmMacsecSecY->numOfRxSc, rxScIds)) != E_OK)
-+    {
-+        if (p_FmMacsecSecY->p_TxSc)
-+            XX_Free(p_FmMacsecSecY->p_TxSc);
-+        if (p_FmMacsecSecY->p_RxSc)
-+            XX_Free(p_FmMacsecSecY->p_RxSc);
-+        return ERROR_CODE(err);
-+    }
-+    for (i=0; i<p_FmMacsecSecY->numOfRxSc; i++)
-+    {
-+        p_FmMacsecSecY->p_RxSc[i].scId  = rxScIds[i];
-+        p_FmMacsecSecY->p_RxSc[i].type  = e_SC_RX;
-+        for (j=0; j<MAX_NUM_OF_SA_PER_SC;j++)
-+            p_FmMacsecSecY->p_RxSc[i].sa[j].saId = (e_ScSaId)SECY_AN_FREE_VALUE;
-+    }
-+
-+    /* Tx Sc Allocation */
-+    p_FmMacsecSecY->p_TxSc = (t_SecYSc *)XX_Malloc(sizeof(t_SecYSc) * p_FmMacsecSecY->numOfTxSc);
-+    if (!p_FmMacsecSecY->p_TxSc)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("FM MACSEC SECY TX SC"));
-+    memset(p_FmMacsecSecY->p_TxSc, 0, sizeof(t_SecYSc) * p_FmMacsecSecY->numOfTxSc);
-+
-+    if ((err = FmMacsecAllocScs(p_FmMacsecSecY->h_FmMacsec, e_SC_TX, p_FmMacsecSecY->isPointToPoint, p_FmMacsecSecY->numOfTxSc, txScIds)) != E_OK)
-+    {
-+        if (p_FmMacsecSecY->p_TxSc)
-+            XX_Free(p_FmMacsecSecY->p_TxSc);
-+        if (p_FmMacsecSecY->p_RxSc)
-+            XX_Free(p_FmMacsecSecY->p_RxSc);
-+        return ERROR_CODE(err);
-+    }
-+    for (i=0; i<p_FmMacsecSecY->numOfTxSc; i++)
-+    {
-+        p_FmMacsecSecY->p_TxSc[i].scId  = txScIds[i];
-+        p_FmMacsecSecY->p_TxSc[i].type  = e_SC_TX;
-+        for (j=0; j<MAX_NUM_OF_SA_PER_SC;j++)
-+            p_FmMacsecSecY->p_TxSc[i].sa[j].saId = (e_ScSaId)SECY_AN_FREE_VALUE;
-+        FmMacsecRegisterIntr(p_FmMacsecSecY->h_FmMacsec,
-+                             e_FM_MACSEC_MOD_SC_TX,
-+                             (uint8_t)txScIds[i],
-+                             e_FM_INTR_TYPE_ERR,
-+                             FmMacsecSecYExceptionsIsr,
-+                             p_FmMacsecSecY);
-+        FmMacsecRegisterIntr(p_FmMacsecSecY->h_FmMacsec,
-+                             e_FM_MACSEC_MOD_SC_TX,
-+                             (uint8_t)txScIds[i],
-+                             e_FM_INTR_TYPE_NORMAL,
-+                             FmMacsecSecYEventsIsr,
-+                             p_FmMacsecSecY);
-+
-+        if (p_FmMacsecSecY->exceptions & FM_MACSEC_SECY_EX_FRAME_DISCARDED)
-+            FmMacsecSetException(p_FmMacsecSecY->h_FmMacsec, e_FM_MACSEC_EX_TX_SC, txScIds[i], TRUE);
-+        if (p_FmMacsecSecY->events & FM_MACSEC_SECY_EV_NEXT_PN)
-+            FmMacsecSetEvent(p_FmMacsecSecY->h_FmMacsec, e_FM_MACSEC_EV_TX_SC_NEXT_PN, txScIds[i], TRUE);
-+    }
-+
-+    FmMacsecSecYCreateSc(p_FmMacsecSecY,
-+                         p_FmMacsecSecYDriverParam->txScParams.sci,
-+                         p_FmMacsecSecYDriverParam->txScParams.cipherSuite,
-+                         e_SC_TX);
-+    XX_Free(p_FmMacsecSecYDriverParam);
-+    p_FmMacsecSecY->p_FmMacsecSecYDriverParam = NULL;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_MACSEC_SECY_Free(t_Handle h_FmMacsecSecY)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_Error         err             = E_OK;
-+    uint32_t        rxScIds[NUM_OF_RX_SC], txScIds[NUM_OF_TX_SC], i;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+
-+    if (p_FmMacsecSecY->isPointToPoint)
-+        FmMacsecSetPTP(p_FmMacsecSecY->h_FmMacsec, FALSE);
-+    if (p_FmMacsecSecY->p_RxSc)
-+    {
-+        for (i=0; i<p_FmMacsecSecY->numOfRxSc; i++)
-+            rxScIds[i] = p_FmMacsecSecY->p_RxSc[i].scId;
-+        if ((err = FmMacsecFreeScs(p_FmMacsecSecY->h_FmMacsec, e_SC_RX, p_FmMacsecSecY->numOfRxSc, rxScIds)) != E_OK)
-+            return ERROR_CODE(err);
-+        XX_Free(p_FmMacsecSecY->p_RxSc);
-+    }
-+    if (p_FmMacsecSecY->p_TxSc)
-+    {
-+       FmMacsecSecYDeleteSc(p_FmMacsecSecY, &p_FmMacsecSecY->p_TxSc[0], e_SC_TX);
-+
-+       for (i=0; i<p_FmMacsecSecY->numOfTxSc; i++) {
-+             txScIds[i] = p_FmMacsecSecY->p_TxSc[i].scId;
-+            FmMacsecUnregisterIntr(p_FmMacsecSecY->h_FmMacsec,
-+                                 e_FM_MACSEC_MOD_SC_TX,
-+                                 (uint8_t)txScIds[i],
-+                                 e_FM_INTR_TYPE_ERR);
-+            FmMacsecUnregisterIntr(p_FmMacsecSecY->h_FmMacsec,
-+                                 e_FM_MACSEC_MOD_SC_TX,
-+                                 (uint8_t)txScIds[i],
-+                                 e_FM_INTR_TYPE_NORMAL);
-+
-+            if (p_FmMacsecSecY->exceptions & FM_MACSEC_SECY_EX_FRAME_DISCARDED)
-+                FmMacsecSetException(p_FmMacsecSecY->h_FmMacsec, e_FM_MACSEC_EX_TX_SC, txScIds[i], FALSE);
-+            if (p_FmMacsecSecY->events & FM_MACSEC_SECY_EV_NEXT_PN)
-+                FmMacsecSetEvent(p_FmMacsecSecY->h_FmMacsec, e_FM_MACSEC_EV_TX_SC_NEXT_PN, txScIds[i], FALSE);
-+       }
-+
-+        if ((err = FmMacsecFreeScs(p_FmMacsecSecY->h_FmMacsec, e_SC_TX, p_FmMacsecSecY->numOfTxSc, txScIds)) != E_OK)
-+            return ERROR_CODE(err);
-+        XX_Free(p_FmMacsecSecY->p_TxSc);
-+    }
-+
-+    XX_Free(p_FmMacsecSecY);
-+
-+    return err;
-+}
-+
-+t_Error FM_MACSEC_SECY_ConfigSciInsertionMode(t_Handle h_FmMacsecSecY, e_FmMacsecSciInsertionMode sciInsertionMode)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+
-+    p_FmMacsecSecY->sciInsertionMode = sciInsertionMode;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_MACSEC_SECY_ConfigProtectFrames(t_Handle h_FmMacsecSecY, bool protectFrames)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+
-+    p_FmMacsecSecY->protectFrames = protectFrames;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_MACSEC_SECY_ConfigReplayWindow(t_Handle h_FmMacsecSecY, bool replayProtect, uint32_t replayWindow)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+
-+    p_FmMacsecSecY->replayProtect   = replayProtect;
-+    p_FmMacsecSecY->replayWindow    = replayWindow;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_MACSEC_SECY_ConfigValidationMode(t_Handle h_FmMacsecSecY, e_FmMacsecValidFrameBehavior validateFrames)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+
-+    p_FmMacsecSecY->validateFrames = validateFrames;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_MACSEC_SECY_ConfigConfidentiality(t_Handle h_FmMacsecSecY, bool confidentialityEnable, uint16_t confidentialityOffset)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+
-+    p_FmMacsecSecY->confidentialityEnable = confidentialityEnable;
-+    p_FmMacsecSecY->confidentialityOffset = confidentialityOffset;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_MACSEC_SECY_ConfigPointToPoint(t_Handle h_FmMacsecSecY)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+
-+    p_FmMacsecSecY->numOfRxSc = 1;
-+    p_FmMacsecSecY->isPointToPoint = TRUE;
-+    p_FmMacsecSecY->sciInsertionMode = e_FM_MACSEC_SCI_INSERTION_MODE_IMPLICT_PTP;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_MACSEC_SECY_ConfigException(t_Handle h_FmMacsecSecY, e_FmMacsecSecYExceptions exception, bool enable)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    uint32_t        bitMask         = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+
-+    GET_EXCEPTION_FLAG(bitMask, exception);
-+    if (bitMask)
-+    {
-+        if (enable)
-+            p_FmMacsecSecY->exceptions |= bitMask;
-+        else
-+            p_FmMacsecSecY->exceptions &= ~bitMask;
-+    }
-+    else
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Undefined exception"));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_MACSEC_SECY_ConfigEvent(t_Handle h_FmMacsecSecY, e_FmMacsecSecYEvents event, bool enable)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    uint32_t        bitMask         = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+
-+    GET_EVENT_FLAG(bitMask, event);
-+    if (bitMask)
-+    {
-+        if (enable)
-+            p_FmMacsecSecY->events |= bitMask;
-+        else
-+            p_FmMacsecSecY->events &= ~bitMask;
-+    }
-+    else
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Undefined event"));
-+
-+    return E_OK;
-+}
-+
-+t_Handle FM_MACSEC_SECY_CreateRxSc(t_Handle h_FmMacsecSecY, t_FmMacsecSecYSCParams *p_ScParams)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmMacsecSecY, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(p_FmMacsecSecY->h_FmMacsec, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(p_ScParams, E_NULL_POINTER, NULL);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE, NULL);
-+
-+    return FmMacsecSecYCreateSc(p_FmMacsecSecY, p_ScParams->sci, p_ScParams->cipherSuite, e_SC_RX);
-+}
-+
-+t_Error FM_MACSEC_SECY_DeleteRxSc(t_Handle h_FmMacsecSecY, t_Handle h_Sc)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_SecYSc        *p_FmSecYSc     = (t_SecYSc *)h_Sc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->h_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmSecYSc, E_INVALID_HANDLE);
-+
-+    return FmMacsecSecYDeleteSc(p_FmMacsecSecY, p_FmSecYSc, e_SC_RX);
-+}
-+
-+t_Error FM_MACSEC_SECY_CreateRxSa(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an, uint32_t lowestPn, macsecSAKey_t key)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_SecYSc        *p_FmSecYSc     = (t_SecYSc *)h_Sc;
-+    t_Error         err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->h_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmSecYSc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(an < MAX_NUM_OF_SA_PER_SC, E_INVALID_STATE);
-+
-+    if (p_FmSecYSc->sa[an].saId != SECY_AN_FREE_VALUE)
-+        RETURN_ERROR(MINOR, E_INVALID_STATE, ("An %d is already assigned",an));
-+
-+    if ((err = FmMacsecCreateRxSa(p_FmMacsecSecY->h_FmMacsec, p_FmSecYSc->scId, (e_ScSaId)p_FmSecYSc->numOfSa, an, lowestPn, key)) != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    p_FmSecYSc->sa[an].saId = (e_ScSaId)p_FmSecYSc->numOfSa++;
-+    return err;
-+}
-+
-+t_Error FM_MACSEC_SECY_DeleteRxSa(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_SecYSc        *p_FmSecYSc     = (t_SecYSc *)h_Sc;
-+    t_Error         err             = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->h_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmSecYSc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(an < MAX_NUM_OF_SA_PER_SC, E_INVALID_STATE);
-+
-+    if (p_FmSecYSc->sa[an].saId == SECY_AN_FREE_VALUE)
-+        RETURN_ERROR(MINOR, E_INVALID_STATE, ("An %d is already deleted",an));
-+
-+    if ((err = FmMacsecDeleteRxSa(p_FmMacsecSecY->h_FmMacsec, p_FmSecYSc->scId, p_FmSecYSc->sa[an].saId)) != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    p_FmSecYSc->numOfSa--;
-+    p_FmSecYSc->sa[an].saId = (e_ScSaId)SECY_AN_FREE_VALUE;
-+    /* TODO - check if statistics need to be read*/
-+    return err;
-+}
-+
-+t_Error FM_MACSEC_SECY_RxSaEnableReceive(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_SecYSc        *p_FmSecYSc     = (t_SecYSc *)h_Sc;
-+    t_Error         err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->h_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmSecYSc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(an < MAX_NUM_OF_SA_PER_SC, E_INVALID_STATE);
-+
-+    if (p_FmSecYSc->sa[an].saId == SECY_AN_FREE_VALUE)
-+        RETURN_ERROR(MINOR, E_INVALID_STATE, ("An %d is not configured",an));
-+
-+    if ((err = FmMacsecRxSaSetReceive(p_FmMacsecSecY->h_FmMacsec,p_FmSecYSc->scId, p_FmSecYSc->sa[an].saId, TRUE)) != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    p_FmSecYSc->sa[an].active = TRUE;
-+    return err;
-+}
-+
-+t_Error FM_MACSEC_SECY_RxSaDisableReceive(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_SecYSc        *p_FmSecYSc     = (t_SecYSc *)h_Sc;
-+    t_Error         err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->h_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmSecYSc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(an < MAX_NUM_OF_SA_PER_SC, E_INVALID_STATE);
-+
-+    if (p_FmSecYSc->sa[an].saId == SECY_AN_FREE_VALUE)
-+        RETURN_ERROR(MINOR, E_INVALID_STATE, ("An %d is not configured",an));
-+
-+    if ((err = FmMacsecRxSaSetReceive(p_FmMacsecSecY->h_FmMacsec,p_FmSecYSc->scId, p_FmSecYSc->sa[an].saId, FALSE)) != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    p_FmSecYSc->sa[an].active = FALSE;
-+    return err;
-+}
-+
-+t_Error FM_MACSEC_SECY_RxSaUpdateNextPn(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an, uint32_t updtNextPN)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_SecYSc        *p_FmSecYSc     = (t_SecYSc *)h_Sc;
-+    t_Error         err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->h_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmSecYSc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(an < MAX_NUM_OF_SA_PER_SC, E_INVALID_STATE);
-+
-+    if (p_FmSecYSc->sa[an].saId == SECY_AN_FREE_VALUE)
-+        RETURN_ERROR(MINOR, E_INVALID_STATE, ("An %d is not configured",an));
-+
-+    if ((err = FmMacsecRxSaUpdateNextPn(p_FmMacsecSecY->h_FmMacsec,p_FmSecYSc->scId, p_FmSecYSc->sa[an].saId, updtNextPN)) != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    return err;
-+}
-+
-+t_Error FM_MACSEC_SECY_RxSaUpdateLowestPn(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an, uint32_t updtLowestPN)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_SecYSc        *p_FmSecYSc     = (t_SecYSc *)h_Sc;
-+    t_Error         err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->h_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmSecYSc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(an < MAX_NUM_OF_SA_PER_SC, E_INVALID_STATE);
-+
-+    if (p_FmSecYSc->sa[an].saId == SECY_AN_FREE_VALUE)
-+        RETURN_ERROR(MINOR, E_INVALID_STATE, ("An %d is not configured",an));
-+
-+    if ((err = FmMacsecRxSaUpdateLowestPn(p_FmMacsecSecY->h_FmMacsec,p_FmSecYSc->scId, p_FmSecYSc->sa[an].saId, updtLowestPN)) != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    return err;
-+}
-+
-+t_Error FM_MACSEC_SECY_RxSaModifyKey(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an, macsecSAKey_t key)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_SecYSc        *p_FmSecYSc     = (t_SecYSc *)h_Sc;
-+    t_Error         err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->h_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmSecYSc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(an < MAX_NUM_OF_SA_PER_SC, E_INVALID_STATE);
-+
-+    if (p_FmSecYSc->sa[an].saId == SECY_AN_FREE_VALUE)
-+        RETURN_ERROR(MINOR, E_INVALID_STATE, ("An %d is not configured",an));
-+
-+    if (p_FmSecYSc->sa[an].active)
-+        if ((err = FmMacsecRxSaSetReceive(p_FmMacsecSecY->h_FmMacsec, p_FmSecYSc->scId, p_FmSecYSc->sa[an].saId, FALSE)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    /* TODO - statistics should be read */
-+
-+    if ((err = FmMacsecCreateRxSa(p_FmMacsecSecY->h_FmMacsec, p_FmSecYSc->scId, p_FmSecYSc->sa[an].saId, an, 1, key)) != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    if (p_FmSecYSc->sa[an].active)
-+        if ((err = FmMacsecRxSaSetReceive(p_FmMacsecSecY->h_FmMacsec, p_FmSecYSc->scId, p_FmSecYSc->sa[an].saId, TRUE)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+    return err;
-+}
-+
-+
-+t_Error FM_MACSEC_SECY_CreateTxSa(t_Handle h_FmMacsecSecY, macsecAN_t an, macsecSAKey_t key)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_SecYSc        *p_FmSecYSc;
-+    t_Error         err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->h_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+    p_FmSecYSc = &p_FmMacsecSecY->p_TxSc[0];
-+    SANITY_CHECK_RETURN_ERROR(p_FmSecYSc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(an < MAX_NUM_OF_SA_PER_SC, E_INVALID_STATE);
-+
-+    if (p_FmSecYSc->sa[an].saId != SECY_AN_FREE_VALUE)
-+        RETURN_ERROR(MINOR, err, ("An %d is already assigned",an));
-+
-+    if ((err = FmMacsecCreateTxSa(p_FmMacsecSecY->h_FmMacsec,p_FmSecYSc->scId, (e_ScSaId)p_FmSecYSc->numOfSa, key)) != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    p_FmSecYSc->sa[an].saId = (e_ScSaId)p_FmSecYSc->numOfSa++;
-+    return err;
-+}
-+
-+t_Error FM_MACSEC_SECY_DeleteTxSa(t_Handle h_FmMacsecSecY, macsecAN_t an)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_SecYSc        *p_FmSecYSc;
-+    t_Error         err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->h_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+    p_FmSecYSc = &p_FmMacsecSecY->p_TxSc[0];
-+    SANITY_CHECK_RETURN_ERROR(p_FmSecYSc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(an < MAX_NUM_OF_SA_PER_SC, E_INVALID_STATE);
-+
-+    if (p_FmSecYSc->sa[an].saId == SECY_AN_FREE_VALUE)
-+        RETURN_ERROR(MINOR, E_INVALID_STATE, ("An %d is already deleted",an));
-+
-+    if ((err = FmMacsecDeleteTxSa(p_FmMacsecSecY->h_FmMacsec, p_FmSecYSc->scId, p_FmSecYSc->sa[an].saId)) != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    p_FmSecYSc->numOfSa--;
-+    p_FmSecYSc->sa[an].saId = (e_ScSaId)SECY_AN_FREE_VALUE;
-+    /* TODO - check if statistics need to be read*/
-+    return err;
-+}
-+
-+t_Error FM_MACSEC_SECY_TxSaModifyKey(t_Handle h_FmMacsecSecY, macsecAN_t nextActiveAn, macsecSAKey_t key)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_SecYSc        *p_FmSecYSc;
-+    macsecAN_t      currentAn;
-+    t_Error         err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->h_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+    p_FmSecYSc = &p_FmMacsecSecY->p_TxSc[0];
-+    SANITY_CHECK_RETURN_ERROR(p_FmSecYSc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(nextActiveAn < MAX_NUM_OF_SA_PER_SC, E_INVALID_STATE);
-+
-+    if ((err = FmMacsecTxSaGetActive(p_FmMacsecSecY->h_FmMacsec,
-+                                     p_FmSecYSc->scId,
-+                                     &currentAn)) != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    if ((err = FmMacsecTxSaSetActive(p_FmMacsecSecY->h_FmMacsec,
-+                                     p_FmSecYSc->scId,
-+                                     p_FmSecYSc->sa[nextActiveAn].saId,
-+                                     nextActiveAn)) != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    /* TODO - statistics should be read */
-+
-+    if ((err = FmMacsecCreateTxSa(p_FmMacsecSecY->h_FmMacsec, p_FmSecYSc->scId, p_FmSecYSc->sa[currentAn].saId, key)) != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    return err;
-+}
-+
-+t_Error FM_MACSEC_SECY_TxSaSetActive(t_Handle h_FmMacsecSecY, macsecAN_t an)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_SecYSc        *p_FmSecYSc;
-+    t_Error         err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->h_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+    p_FmSecYSc = &p_FmMacsecSecY->p_TxSc[0];
-+    SANITY_CHECK_RETURN_ERROR(p_FmSecYSc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(an < MAX_NUM_OF_SA_PER_SC, E_INVALID_STATE);
-+
-+    if (p_FmSecYSc->sa[an].saId == SECY_AN_FREE_VALUE)
-+        RETURN_ERROR(MINOR, E_INVALID_STATE, ("An %d is not configured",an));
-+
-+    if ((err = FmMacsecTxSaSetActive(p_FmMacsecSecY->h_FmMacsec,
-+                                     p_FmSecYSc->scId,
-+                                     p_FmSecYSc->sa[an].saId,
-+                                     an)) != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    return err;
-+}
-+
-+t_Error FM_MACSEC_SECY_TxSaGetActive(t_Handle h_FmMacsecSecY, macsecAN_t *p_An)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_SecYSc        *p_FmSecYSc;
-+    t_Error         err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->h_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+    p_FmSecYSc = &p_FmMacsecSecY->p_TxSc[0];
-+    SANITY_CHECK_RETURN_ERROR(p_FmSecYSc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_An, E_INVALID_HANDLE);
-+
-+    if ((err = FmMacsecTxSaGetActive(p_FmMacsecSecY->h_FmMacsec,
-+                                     p_FmSecYSc->scId,
-+                                     p_An)) != E_OK)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    return err;
-+}
-+
-+t_Error FM_MACSEC_SECY_GetRxScPhysId(t_Handle h_FmMacsecSecY, t_Handle h_Sc, uint32_t *p_ScPhysId)
-+{
-+    t_SecYSc        *p_FmSecYSc = (t_SecYSc *)h_Sc;
-+    t_Error         err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(((t_FmMacsecSecY *)h_FmMacsecSecY)->h_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!((t_FmMacsecSecY *)h_FmMacsecSecY)->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmSecYSc, E_INVALID_HANDLE);
-+#ifdef DISABLE_SANITY_CHECKS
-+    UNUSED(h_FmMacsecSecY);
-+#endif /* DISABLE_SANITY_CHECKS */
-+
-+    *p_ScPhysId = p_FmSecYSc->scId;
-+    return err;
-+}
-+
-+t_Error FM_MACSEC_SECY_GetTxScPhysId(t_Handle h_FmMacsecSecY, uint32_t *p_ScPhysId)
-+{
-+    t_FmMacsecSecY  *p_FmMacsecSecY = (t_FmMacsecSecY *)h_FmMacsecSecY;
-+    t_SecYSc        *p_FmSecYSc;
-+    t_Error         err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacsecSecY->h_FmMacsec, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmMacsecSecY->p_FmMacsecSecYDriverParam, E_INVALID_STATE);
-+    p_FmSecYSc = &p_FmMacsecSecY->p_TxSc[0];
-+    SANITY_CHECK_RETURN_ERROR(p_FmSecYSc, E_INVALID_HANDLE);
-+
-+    *p_ScPhysId = p_FmSecYSc->scId;
-+    return err;
-+}
-+
-+t_Error FM_MACSEC_SECY_SetException(t_Handle h_FmMacsecSecY, e_FmMacsecExceptions exception, bool enable)
-+{
-+   UNUSED(h_FmMacsecSecY);UNUSED(exception);UNUSED(enable);
-+   RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_SECY_SetEvent(t_Handle h_FmMacsecSecY, e_FmMacsecSecYEvents event, bool enable)
-+{
-+    UNUSED(h_FmMacsecSecY);UNUSED(event);UNUSED(enable);
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_SECY_GetStatistics(t_Handle h_FmMacsecSecY, t_FmMacsecSecYStatistics *p_Statistics)
-+{
-+    UNUSED(h_FmMacsecSecY);UNUSED(p_Statistics);
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_SECY_RxScGetStatistics(t_Handle h_FmMacsecSecY, t_Handle h_Sc, t_FmMacsecSecYRxScStatistics *p_Statistics)
-+{
-+    UNUSED(h_FmMacsecSecY);UNUSED(h_Sc);UNUSED(p_Statistics);
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_SECY_RxSaGetStatistics(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an, t_FmMacsecSecYRxSaStatistics *p_Statistics)
-+{
-+    UNUSED(h_FmMacsecSecY);UNUSED(h_Sc);UNUSED(an);UNUSED(p_Statistics);
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_SECY_TxScGetStatistics(t_Handle h_FmMacsecSecY, t_FmMacsecSecYTxScStatistics *p_Statistics)
-+{
-+    UNUSED(h_FmMacsecSecY);UNUSED(p_Statistics);
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+t_Error FM_MACSEC_SECY_TxSaGetStatistics(t_Handle h_FmMacsecSecY, macsecAN_t an, t_FmMacsecSecYTxSaStatistics *p_Statistics)
-+{
-+    UNUSED(h_FmMacsecSecY);UNUSED(an);UNUSED(p_Statistics);
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MACSEC/fm_macsec_secy.h
-@@ -0,0 +1,144 @@
-+/*
-+ * Copyright 2008-2015 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/******************************************************************************
-+ @File          fm_macsec_secy.h
-+
-+ @Description   FM MACSEC SecY internal structures and definitions.
-+*//***************************************************************************/
-+#ifndef __FM_MACSEC_SECY_H
-+#define __FM_MACSEC_SECY_H
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+
-+#include "fm_macsec.h"
-+
-+
-+/**************************************************************************//**
-+ @Description       Exceptions
-+*//***************************************************************************/
-+
-+#define FM_MACSEC_SECY_EX_FRAME_DISCARDED           0x80000000
-+
-+#define GET_EXCEPTION_FLAG(bitMask, exception)  switch (exception){     \
-+    case e_FM_MACSEC_SECY_EX_FRAME_DISCARDED:                           \
-+        bitMask = FM_MACSEC_SECY_EX_FRAME_DISCARDED; break;             \
-+    default: bitMask = 0;break;}
-+
-+/**************************************************************************//**
-+ @Description       Events
-+*//***************************************************************************/
-+
-+#define FM_MACSEC_SECY_EV_NEXT_PN                        0x80000000
-+
-+#define GET_EVENT_FLAG(bitMask, event)          switch (event){     \
-+    case e_FM_MACSEC_SECY_EV_NEXT_PN:                               \
-+        bitMask = FM_MACSEC_SECY_EV_NEXT_PN; break;                 \
-+    default: bitMask = 0;break;}
-+
-+/**************************************************************************//**
-+ @Description       Defaults
-+*//***************************************************************************/
-+
-+#define DEFAULT_exceptions                  (FM_MACSEC_SECY_EX_FRAME_DISCARDED)
-+#define DEFAULT_events                      (FM_MACSEC_SECY_EV_NEXT_PN)
-+#define DEFAULT_numOfTxSc                   1
-+#define DEFAULT_confidentialityEnable       FALSE
-+#define DEFAULT_confidentialityOffset       0
-+#define DEFAULT_sciInsertionMode            e_FM_MACSEC_SCI_INSERTION_MODE_EXPLICIT_SECTAG
-+#define DEFAULT_validateFrames              e_FM_MACSEC_VALID_FRAME_BEHAVIOR_STRICT
-+#define DEFAULT_replayEnable                FALSE
-+#define DEFAULT_replayWindow                0
-+#define DEFAULT_protectFrames               TRUE
-+#define DEFAULT_ptp                         FALSE
-+
-+/**************************************************************************//**
-+ @Description       General defines
-+*//***************************************************************************/
-+
-+#define SECY_AN_FREE_VALUE              MAX_NUM_OF_SA_PER_SC
-+
-+
-+typedef struct {
-+    e_ScSaId                            saId;
-+    bool                                active;
-+    union {
-+        t_FmMacsecSecYRxSaStatistics    rxSaStatistics;
-+        t_FmMacsecSecYTxSaStatistics    txSaStatistics;
-+    };
-+} t_SecYSa;
-+
-+typedef struct {
-+    bool                                inUse;
-+    uint32_t                            scId;
-+    e_ScType                            type;
-+    uint8_t                             numOfSa;
-+    t_SecYSa                            sa[MAX_NUM_OF_SA_PER_SC];
-+    union {
-+        t_FmMacsecSecYRxScStatistics    rxScStatistics;
-+        t_FmMacsecSecYTxScStatistics    txScStatistics;
-+    };
-+} t_SecYSc;
-+
-+typedef struct {
-+    t_FmMacsecSecYSCParams              txScParams;             /**< Tx SC Params */
-+} t_FmMacsecSecYDriverParam;
-+
-+typedef struct {
-+    t_Handle                            h_FmMacsec;
-+    bool                                confidentialityEnable;  /**< TRUE  - confidentiality protection and integrity protection
-+                                                                     FALSE - no confidentiality protection, only integrity protection*/
-+    uint16_t                            confidentialityOffset;  /**< The number of initial octets of each MSDU without confidentiality protection
-+                                                                     common values are 0, 30, and 50 */
-+    bool                                replayProtect;          /**< replay protection function mode */
-+    uint32_t                            replayWindow;           /**< the size of the replay window */
-+    e_FmMacsecValidFrameBehavior        validateFrames;         /**< validation function mode */
-+    e_FmMacsecSciInsertionMode          sciInsertionMode;
-+    bool                                protectFrames;
-+    bool                                isPointToPoint;
-+    e_FmMacsecSecYCipherSuite           cipherSuite;            /**< Cipher suite to be used for this SecY */
-+    uint32_t                            numOfRxSc;              /**< Number of receive channels */
-+    uint32_t                            numOfTxSc;              /**< Number of transmit channels */
-+    t_SecYSc                            *p_RxSc;
-+    t_SecYSc                            *p_TxSc;
-+    uint32_t                            events;
-+    uint32_t                            exceptions;
-+    t_FmMacsecSecYExceptionsCallback    *f_Exception;           /**< TODO */
-+    t_FmMacsecSecYEventsCallback        *f_Event;               /**< TODO */
-+    t_Handle                            h_App;
-+    t_FmMacsecSecYStatistics            statistics;
-+    t_FmMacsecSecYDriverParam           *p_FmMacsecSecYDriverParam;
-+} t_FmMacsecSecY;
-+
-+
-+#endif /* __FM_MACSEC_SECY_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Makefile
-@@ -0,0 +1,23 @@
-+#
-+# Makefile for the Freescale Ethernet controllers
-+#
-+ccflags-y           += -DVERSION=\"\"
-+#
-+#Include netcomm SW specific definitions
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+NCSW_FM_INC = $(srctree)/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/inc
-+
-+ccflags-y += -I$(NCSW_FM_INC)
-+
-+
-+obj-y		+= fsl-ncsw-PFM1.o
-+
-+fsl-ncsw-PFM1-objs	:=   fm.o fm_muram.o fman.o
-+
-+obj-y		+= MAC/
-+obj-y		+= Pcd/
-+obj-y		+= SP/
-+obj-y		+= Port/
-+obj-y		+= HC/
-+obj-y		+= Rtc/
-+obj-y		+= MACSEC/
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/Makefile
-@@ -0,0 +1,26 @@
-+#
-+# Makefile for the Freescale Ethernet controllers
-+#
-+ccflags-y           += -DVERSION=\"\"
-+#
-+#Include netcomm SW specific definitions
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+
-+NCSW_FM_INC = $(srctree)/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/inc
-+
-+ccflags-y += -I$(NCSW_FM_INC)
-+
-+obj-y		+= fsl-ncsw-Pcd.o
-+
-+fsl-ncsw-Pcd-objs	:= fman_kg.o fman_prs.o fm_cc.o fm_kg.o fm_pcd.o fm_plcr.o fm_prs.o fm_manip.o
-+
-+ifeq ($(CONFIG_FMAN_V3H),y)
-+fsl-ncsw-Pcd-objs	+= fm_replic.o
-+endif
-+ifeq ($(CONFIG_FMAN_V3L),y)
-+fsl-ncsw-Pcd-objs       += fm_replic.o
-+endif
-+ifeq ($(CONFIG_FMAN_ARM),y)
-+fsl-ncsw-Pcd-objs	+= fm_replic.o
-+endif
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/crc64.h
-@@ -0,0 +1,360 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+ /**************************************************************************//**
-+ @File          crc64.h
-+
-+ @Description   brief This file contains the CRC64 Table, and __inline__
-+                functions used for calculating crc.
-+*//***************************************************************************/
-+#ifndef __CRC64_H
-+#define __CRC64_H
-+
-+#include "std_ext.h"
-+
-+
-+#define BITS_PER_BYTE                   8
-+
-+#define CRC64_EXPON_ECMA_182            0xC96C5795D7870F42ULL
-+#define CRC64_DEFAULT_INITVAL           0xFFFFFFFFFFFFFFFFULL
-+
-+#define CRC64_BYTE_MASK                 0xFF
-+#define CRC64_TABLE_ENTRIES             ( 1 << BITS_PER_BYTE )
-+#define CRC64_ODD_MASK                  1
-+
-+
-+/**
-+ \brief '64 bit crc' Table
-+ */
-+struct crc64_t {
-+    uint64_t initial;                       /**< Initial seed */
-+    uint64_t table[CRC64_TABLE_ENTRIES];    /**< CRC table entries */
-+};
-+
-+
-+static struct crc64_t CRC64_ECMA_182 = {
-+    CRC64_DEFAULT_INITVAL,
-+    {
-+        0x0000000000000000ULL,
-+        0xb32e4cbe03a75f6fULL,
-+        0xf4843657a840a05bULL,
-+        0x47aa7ae9abe7ff34ULL,
-+        0x7bd0c384ff8f5e33ULL,
-+        0xc8fe8f3afc28015cULL,
-+        0x8f54f5d357cffe68ULL,
-+        0x3c7ab96d5468a107ULL,
-+        0xf7a18709ff1ebc66ULL,
-+        0x448fcbb7fcb9e309ULL,
-+        0x0325b15e575e1c3dULL,
-+        0xb00bfde054f94352ULL,
-+        0x8c71448d0091e255ULL,
-+        0x3f5f08330336bd3aULL,
-+        0x78f572daa8d1420eULL,
-+        0xcbdb3e64ab761d61ULL,
-+        0x7d9ba13851336649ULL,
-+        0xceb5ed8652943926ULL,
-+        0x891f976ff973c612ULL,
-+        0x3a31dbd1fad4997dULL,
-+        0x064b62bcaebc387aULL,
-+        0xb5652e02ad1b6715ULL,
-+        0xf2cf54eb06fc9821ULL,
-+        0x41e11855055bc74eULL,
-+        0x8a3a2631ae2dda2fULL,
-+        0x39146a8fad8a8540ULL,
-+        0x7ebe1066066d7a74ULL,
-+        0xcd905cd805ca251bULL,
-+        0xf1eae5b551a2841cULL,
-+        0x42c4a90b5205db73ULL,
-+        0x056ed3e2f9e22447ULL,
-+        0xb6409f5cfa457b28ULL,
-+        0xfb374270a266cc92ULL,
-+        0x48190ecea1c193fdULL,
-+        0x0fb374270a266cc9ULL,
-+        0xbc9d3899098133a6ULL,
-+        0x80e781f45de992a1ULL,
-+        0x33c9cd4a5e4ecdceULL,
-+        0x7463b7a3f5a932faULL,
-+        0xc74dfb1df60e6d95ULL,
-+        0x0c96c5795d7870f4ULL,
-+        0xbfb889c75edf2f9bULL,
-+        0xf812f32ef538d0afULL,
-+        0x4b3cbf90f69f8fc0ULL,
-+        0x774606fda2f72ec7ULL,
-+        0xc4684a43a15071a8ULL,
-+        0x83c230aa0ab78e9cULL,
-+        0x30ec7c140910d1f3ULL,
-+        0x86ace348f355aadbULL,
-+        0x3582aff6f0f2f5b4ULL,
-+        0x7228d51f5b150a80ULL,
-+        0xc10699a158b255efULL,
-+        0xfd7c20cc0cdaf4e8ULL,
-+        0x4e526c720f7dab87ULL,
-+        0x09f8169ba49a54b3ULL,
-+        0xbad65a25a73d0bdcULL,
-+        0x710d64410c4b16bdULL,
-+        0xc22328ff0fec49d2ULL,
-+        0x85895216a40bb6e6ULL,
-+        0x36a71ea8a7ace989ULL,
-+        0x0adda7c5f3c4488eULL,
-+        0xb9f3eb7bf06317e1ULL,
-+        0xfe5991925b84e8d5ULL,
-+        0x4d77dd2c5823b7baULL,
-+        0x64b62bcaebc387a1ULL,
-+        0xd7986774e864d8ceULL,
-+        0x90321d9d438327faULL,
-+        0x231c512340247895ULL,
-+        0x1f66e84e144cd992ULL,
-+        0xac48a4f017eb86fdULL,
-+        0xebe2de19bc0c79c9ULL,
-+        0x58cc92a7bfab26a6ULL,
-+        0x9317acc314dd3bc7ULL,
-+        0x2039e07d177a64a8ULL,
-+        0x67939a94bc9d9b9cULL,
-+        0xd4bdd62abf3ac4f3ULL,
-+        0xe8c76f47eb5265f4ULL,
-+        0x5be923f9e8f53a9bULL,
-+        0x1c4359104312c5afULL,
-+        0xaf6d15ae40b59ac0ULL,
-+        0x192d8af2baf0e1e8ULL,
-+        0xaa03c64cb957be87ULL,
-+        0xeda9bca512b041b3ULL,
-+        0x5e87f01b11171edcULL,
-+        0x62fd4976457fbfdbULL,
-+        0xd1d305c846d8e0b4ULL,
-+        0x96797f21ed3f1f80ULL,
-+        0x2557339fee9840efULL,
-+        0xee8c0dfb45ee5d8eULL,
-+        0x5da24145464902e1ULL,
-+        0x1a083bacedaefdd5ULL,
-+        0xa9267712ee09a2baULL,
-+        0x955cce7fba6103bdULL,
-+        0x267282c1b9c65cd2ULL,
-+        0x61d8f8281221a3e6ULL,
-+        0xd2f6b4961186fc89ULL,
-+        0x9f8169ba49a54b33ULL,
-+        0x2caf25044a02145cULL,
-+        0x6b055fede1e5eb68ULL,
-+        0xd82b1353e242b407ULL,
-+        0xe451aa3eb62a1500ULL,
-+        0x577fe680b58d4a6fULL,
-+        0x10d59c691e6ab55bULL,
-+        0xa3fbd0d71dcdea34ULL,
-+        0x6820eeb3b6bbf755ULL,
-+        0xdb0ea20db51ca83aULL,
-+        0x9ca4d8e41efb570eULL,
-+        0x2f8a945a1d5c0861ULL,
-+        0x13f02d374934a966ULL,
-+        0xa0de61894a93f609ULL,
-+        0xe7741b60e174093dULL,
-+        0x545a57dee2d35652ULL,
-+        0xe21ac88218962d7aULL,
-+        0x5134843c1b317215ULL,
-+        0x169efed5b0d68d21ULL,
-+        0xa5b0b26bb371d24eULL,
-+        0x99ca0b06e7197349ULL,
-+        0x2ae447b8e4be2c26ULL,
-+        0x6d4e3d514f59d312ULL,
-+        0xde6071ef4cfe8c7dULL,
-+        0x15bb4f8be788911cULL,
-+        0xa6950335e42fce73ULL,
-+        0xe13f79dc4fc83147ULL,
-+        0x521135624c6f6e28ULL,
-+        0x6e6b8c0f1807cf2fULL,
-+        0xdd45c0b11ba09040ULL,
-+        0x9aefba58b0476f74ULL,
-+        0x29c1f6e6b3e0301bULL,
-+        0xc96c5795d7870f42ULL,
-+        0x7a421b2bd420502dULL,
-+        0x3de861c27fc7af19ULL,
-+        0x8ec62d7c7c60f076ULL,
-+        0xb2bc941128085171ULL,
-+        0x0192d8af2baf0e1eULL,
-+        0x4638a2468048f12aULL,
-+        0xf516eef883efae45ULL,
-+        0x3ecdd09c2899b324ULL,
-+        0x8de39c222b3eec4bULL,
-+        0xca49e6cb80d9137fULL,
-+        0x7967aa75837e4c10ULL,
-+        0x451d1318d716ed17ULL,
-+        0xf6335fa6d4b1b278ULL,
-+        0xb199254f7f564d4cULL,
-+        0x02b769f17cf11223ULL,
-+        0xb4f7f6ad86b4690bULL,
-+        0x07d9ba1385133664ULL,
-+        0x4073c0fa2ef4c950ULL,
-+        0xf35d8c442d53963fULL,
-+        0xcf273529793b3738ULL,
-+        0x7c0979977a9c6857ULL,
-+        0x3ba3037ed17b9763ULL,
-+        0x888d4fc0d2dcc80cULL,
-+        0x435671a479aad56dULL,
-+        0xf0783d1a7a0d8a02ULL,
-+        0xb7d247f3d1ea7536ULL,
-+        0x04fc0b4dd24d2a59ULL,
-+        0x3886b22086258b5eULL,
-+        0x8ba8fe9e8582d431ULL,
-+        0xcc0284772e652b05ULL,
-+        0x7f2cc8c92dc2746aULL,
-+        0x325b15e575e1c3d0ULL,
-+        0x8175595b76469cbfULL,
-+        0xc6df23b2dda1638bULL,
-+        0x75f16f0cde063ce4ULL,
-+        0x498bd6618a6e9de3ULL,
-+        0xfaa59adf89c9c28cULL,
-+        0xbd0fe036222e3db8ULL,
-+        0x0e21ac88218962d7ULL,
-+        0xc5fa92ec8aff7fb6ULL,
-+        0x76d4de52895820d9ULL,
-+        0x317ea4bb22bfdfedULL,
-+        0x8250e80521188082ULL,
-+        0xbe2a516875702185ULL,
-+        0x0d041dd676d77eeaULL,
-+        0x4aae673fdd3081deULL,
-+        0xf9802b81de97deb1ULL,
-+        0x4fc0b4dd24d2a599ULL,
-+        0xfceef8632775faf6ULL,
-+        0xbb44828a8c9205c2ULL,
-+        0x086ace348f355aadULL,
-+        0x34107759db5dfbaaULL,
-+        0x873e3be7d8faa4c5ULL,
-+        0xc094410e731d5bf1ULL,
-+        0x73ba0db070ba049eULL,
-+        0xb86133d4dbcc19ffULL,
-+        0x0b4f7f6ad86b4690ULL,
-+        0x4ce50583738cb9a4ULL,
-+        0xffcb493d702be6cbULL,
-+        0xc3b1f050244347ccULL,
-+        0x709fbcee27e418a3ULL,
-+        0x3735c6078c03e797ULL,
-+        0x841b8ab98fa4b8f8ULL,
-+        0xadda7c5f3c4488e3ULL,
-+        0x1ef430e13fe3d78cULL,
-+        0x595e4a08940428b8ULL,
-+        0xea7006b697a377d7ULL,
-+        0xd60abfdbc3cbd6d0ULL,
-+        0x6524f365c06c89bfULL,
-+        0x228e898c6b8b768bULL,
-+        0x91a0c532682c29e4ULL,
-+        0x5a7bfb56c35a3485ULL,
-+        0xe955b7e8c0fd6beaULL,
-+        0xaeffcd016b1a94deULL,
-+        0x1dd181bf68bdcbb1ULL,
-+        0x21ab38d23cd56ab6ULL,
-+        0x9285746c3f7235d9ULL,
-+        0xd52f0e859495caedULL,
-+        0x6601423b97329582ULL,
-+        0xd041dd676d77eeaaULL,
-+        0x636f91d96ed0b1c5ULL,
-+        0x24c5eb30c5374ef1ULL,
-+        0x97eba78ec690119eULL,
-+        0xab911ee392f8b099ULL,
-+        0x18bf525d915feff6ULL,
-+        0x5f1528b43ab810c2ULL,
-+        0xec3b640a391f4fadULL,
-+        0x27e05a6e926952ccULL,
-+        0x94ce16d091ce0da3ULL,
-+        0xd3646c393a29f297ULL,
-+        0x604a2087398eadf8ULL,
-+        0x5c3099ea6de60cffULL,
-+        0xef1ed5546e415390ULL,
-+        0xa8b4afbdc5a6aca4ULL,
-+        0x1b9ae303c601f3cbULL,
-+        0x56ed3e2f9e224471ULL,
-+        0xe5c372919d851b1eULL,
-+        0xa26908783662e42aULL,
-+        0x114744c635c5bb45ULL,
-+        0x2d3dfdab61ad1a42ULL,
-+        0x9e13b115620a452dULL,
-+        0xd9b9cbfcc9edba19ULL,
-+        0x6a978742ca4ae576ULL,
-+        0xa14cb926613cf817ULL,
-+        0x1262f598629ba778ULL,
-+        0x55c88f71c97c584cULL,
-+        0xe6e6c3cfcadb0723ULL,
-+        0xda9c7aa29eb3a624ULL,
-+        0x69b2361c9d14f94bULL,
-+        0x2e184cf536f3067fULL,
-+        0x9d36004b35545910ULL,
-+        0x2b769f17cf112238ULL,
-+        0x9858d3a9ccb67d57ULL,
-+        0xdff2a94067518263ULL,
-+        0x6cdce5fe64f6dd0cULL,
-+        0x50a65c93309e7c0bULL,
-+        0xe388102d33392364ULL,
-+        0xa4226ac498dedc50ULL,
-+        0x170c267a9b79833fULL,
-+        0xdcd7181e300f9e5eULL,
-+        0x6ff954a033a8c131ULL,
-+        0x28532e49984f3e05ULL,
-+        0x9b7d62f79be8616aULL,
-+        0xa707db9acf80c06dULL,
-+        0x14299724cc279f02ULL,
-+        0x5383edcd67c06036ULL,
-+        0xe0ada17364673f59ULL
-+    }
-+};
-+
-+
-+/**
-+ \brief Initializes the crc seed
-+ */
-+static __inline__ uint64_t crc64_init(void)
-+{
-+    return CRC64_ECMA_182.initial;
-+}
-+
-+/**
-+ \brief Computes 64 bit the crc
-+ \param[in] data Pointer to the Data in the frame
-+ \param[in] len Length of the Data
-+ \param[in] crc seed
-+ \return calculated crc
-+ */
-+static __inline__ uint64_t crc64_compute(void const *data,
-+                                         uint32_t   len,
-+                                         uint64_t   seed)
-+{
-+    uint32_t i;
-+    uint64_t crc = seed;
-+    uint8_t *bdata = (uint8_t *) data;
-+
-+    for (i = 0; i < len; i++)
-+        crc =
-+            CRC64_ECMA_182.
-+            table[(crc ^ *bdata++) & CRC64_BYTE_MASK] ^ (crc >> 8);
-+
-+    return crc;
-+}
-+
-+
-+#endif /* __CRC64_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_cc.c
-@@ -0,0 +1,7582 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_cc.c
-+
-+ @Description   FM Coarse Classifier implementation
-+ *//***************************************************************************/
-+#include <linux/math64.h>
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "string_ext.h"
-+#include "debug_ext.h"
-+#include "fm_pcd_ext.h"
-+#include "fm_muram_ext.h"
-+
-+#include "fm_common.h"
-+#include "fm_pcd.h"
-+#include "fm_hc.h"
-+#include "fm_cc.h"
-+#include "crc64.h"
-+
-+/****************************************/
-+/*       static functions               */
-+/****************************************/
-+
-+
-+static t_Error CcRootTryLock(t_Handle h_FmPcdCcTree)
-+{
-+    t_FmPcdCcTree *p_FmPcdCcTree = (t_FmPcdCcTree *)h_FmPcdCcTree;
-+
-+    ASSERT_COND(h_FmPcdCcTree);
-+
-+    if (FmPcdLockTryLock(p_FmPcdCcTree->p_Lock))
-+        return E_OK;
-+
-+    return ERROR_CODE(E_BUSY);
-+}
-+
-+static void CcRootReleaseLock(t_Handle h_FmPcdCcTree)
-+{
-+    t_FmPcdCcTree *p_FmPcdCcTree = (t_FmPcdCcTree *)h_FmPcdCcTree;
-+
-+    ASSERT_COND(h_FmPcdCcTree);
-+
-+    FmPcdLockUnlock(p_FmPcdCcTree->p_Lock);
-+}
-+
-+static void UpdateNodeOwner(t_FmPcdCcNode *p_CcNode, bool add)
-+{
-+    uint32_t intFlags;
-+
-+    ASSERT_COND(p_CcNode);
-+
-+    intFlags = XX_LockIntrSpinlock(p_CcNode->h_Spinlock);
-+
-+    if (add)
-+        p_CcNode->owners++;
-+    else
-+    {
-+        ASSERT_COND(p_CcNode->owners);
-+        p_CcNode->owners--;
-+    }
-+
-+    XX_UnlockIntrSpinlock(p_CcNode->h_Spinlock, intFlags);
-+}
-+
-+static __inline__ t_FmPcdStatsObj* DequeueStatsObj(t_List *p_List)
-+{
-+    t_FmPcdStatsObj *p_StatsObj = NULL;
-+    t_List *p_Next;
-+
-+    if (!LIST_IsEmpty(p_List))
-+    {
-+        p_Next = LIST_FIRST(p_List);
-+        p_StatsObj = LIST_OBJECT(p_Next, t_FmPcdStatsObj, node);
-+        ASSERT_COND(p_StatsObj);
-+        LIST_DelAndInit(p_Next);
-+    }
-+
-+    return p_StatsObj;
-+}
-+
-+static __inline__ void EnqueueStatsObj(t_List *p_List,
-+                                       t_FmPcdStatsObj *p_StatsObj)
-+{
-+    LIST_AddToTail(&p_StatsObj->node, p_List);
-+}
-+
-+static void FreeStatObjects(t_List *p_List, t_Handle h_FmMuram)
-+{
-+    t_FmPcdStatsObj *p_StatsObj;
-+
-+    while (!LIST_IsEmpty(p_List))
-+    {
-+        p_StatsObj = DequeueStatsObj(p_List);
-+        ASSERT_COND(p_StatsObj);
-+
-+        FM_MURAM_FreeMem(h_FmMuram, p_StatsObj->h_StatsAd);
-+        FM_MURAM_FreeMem(h_FmMuram, p_StatsObj->h_StatsCounters);
-+
-+        XX_Free(p_StatsObj);
-+    }
-+}
-+
-+static t_FmPcdStatsObj* GetStatsObj(t_FmPcdCcNode *p_CcNode)
-+{
-+    t_FmPcdStatsObj* p_StatsObj;
-+    t_Handle h_FmMuram;
-+
-+    ASSERT_COND(p_CcNode);
-+
-+    /* If 'maxNumOfKeys' was passed, all statistics object were preallocated
-+     upon node initialization */
-+    if (p_CcNode->maxNumOfKeys)
-+    {
-+        p_StatsObj = DequeueStatsObj(&p_CcNode->availableStatsLst);
-+
-+		/* Clean statistics counters & ADs */
-+		MemSet8(p_StatsObj->h_StatsAd, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+		MemSet8(p_StatsObj->h_StatsCounters, 0, p_CcNode->countersArraySize);
-+    }
-+    else
-+    {
-+        h_FmMuram = ((t_FmPcd *)(p_CcNode->h_FmPcd))->h_FmMuram;
-+        ASSERT_COND(h_FmMuram);
-+
-+        p_StatsObj = XX_Malloc(sizeof(t_FmPcdStatsObj));
-+        if (!p_StatsObj)
-+        {
-+            REPORT_ERROR(MAJOR, E_NO_MEMORY, ("statistics object"));
-+            return NULL;
-+        }
-+
-+        p_StatsObj->h_StatsAd = (t_Handle)FM_MURAM_AllocMem(
-+                h_FmMuram, FM_PCD_CC_AD_ENTRY_SIZE, FM_PCD_CC_AD_TABLE_ALIGN);
-+        if (!p_StatsObj->h_StatsAd)
-+        {
-+            XX_Free(p_StatsObj);
-+            REPORT_ERROR(MAJOR, E_NO_MEMORY, ("MURAM allocation for statistics ADs"));
-+            return NULL;
-+        }
-+        MemSet8(p_StatsObj->h_StatsAd, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+        p_StatsObj->h_StatsCounters = (t_Handle)FM_MURAM_AllocMem(
-+                h_FmMuram, p_CcNode->countersArraySize,
-+                FM_PCD_CC_AD_TABLE_ALIGN);
-+        if (!p_StatsObj->h_StatsCounters)
-+        {
-+            FM_MURAM_FreeMem(h_FmMuram, p_StatsObj->h_StatsAd);
-+            XX_Free(p_StatsObj);
-+            REPORT_ERROR(MAJOR, E_NO_MEMORY, ("MURAM allocation for statistics counters"));
-+            return NULL;
-+        }
-+        MemSet8(p_StatsObj->h_StatsCounters, 0, p_CcNode->countersArraySize);
-+    }
-+
-+    return p_StatsObj;
-+}
-+
-+static void PutStatsObj(t_FmPcdCcNode *p_CcNode, t_FmPcdStatsObj *p_StatsObj)
-+{
-+    t_Handle h_FmMuram;
-+
-+    ASSERT_COND(p_CcNode);
-+    ASSERT_COND(p_StatsObj);
-+
-+    /* If 'maxNumOfKeys' was passed, all statistics object were preallocated
-+     upon node initialization and now will be enqueued back to the list */
-+    if (p_CcNode->maxNumOfKeys)
-+    {
-+		/* Clean statistics counters */
-+		MemSet8(p_StatsObj->h_StatsCounters, 0, p_CcNode->countersArraySize);
-+
-+		/* Clean statistics ADs */
-+		MemSet8(p_StatsObj->h_StatsAd, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+        EnqueueStatsObj(&p_CcNode->availableStatsLst, p_StatsObj);
-+    }
-+    else
-+    {
-+        h_FmMuram = ((t_FmPcd *)(p_CcNode->h_FmPcd))->h_FmMuram;
-+        ASSERT_COND(h_FmMuram);
-+
-+        FM_MURAM_FreeMem(h_FmMuram, p_StatsObj->h_StatsAd);
-+        FM_MURAM_FreeMem(h_FmMuram, p_StatsObj->h_StatsCounters);
-+
-+        XX_Free(p_StatsObj);
-+    }
-+}
-+
-+static void SetStatsCounters(t_AdOfTypeStats *p_StatsAd,
-+                             uint32_t statsCountersAddr)
-+{
-+    uint32_t tmp = (statsCountersAddr & FM_PCD_AD_STATS_COUNTERS_ADDR_MASK);
-+
-+    WRITE_UINT32(p_StatsAd->statsTableAddr, tmp);
-+}
-+
-+
-+static void UpdateStatsAd(t_FmPcdCcStatsParams *p_FmPcdCcStatsParams,
-+                          t_Handle h_Ad, uint64_t physicalMuramBase)
-+{
-+    t_AdOfTypeStats *p_StatsAd;
-+    uint32_t statsCountersAddr, nextActionAddr, tmp;
-+#if (DPAA_VERSION >= 11)
-+    uint32_t frameLengthRangesAddr;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    p_StatsAd = (t_AdOfTypeStats *)p_FmPcdCcStatsParams->h_StatsAd;
-+
-+    tmp = FM_PCD_AD_STATS_TYPE;
-+
-+#if (DPAA_VERSION >= 11)
-+    if (p_FmPcdCcStatsParams->h_StatsFLRs)
-+    {
-+        frameLengthRangesAddr = (uint32_t)((XX_VirtToPhys(
-+                p_FmPcdCcStatsParams->h_StatsFLRs) - physicalMuramBase));
-+        tmp |= (frameLengthRangesAddr & FM_PCD_AD_STATS_FLR_ADDR_MASK);
-+    }
-+#endif /* (DPAA_VERSION >= 11) */
-+    WRITE_UINT32(p_StatsAd->profileTableAddr, tmp);
-+
-+    nextActionAddr = (uint32_t)((XX_VirtToPhys(h_Ad) - physicalMuramBase));
-+    tmp = 0;
-+    tmp |= (uint32_t)((nextActionAddr << FM_PCD_AD_STATS_NEXT_ACTION_SHIFT)
-+            & FM_PCD_AD_STATS_NEXT_ACTION_MASK);
-+    tmp |= (FM_PCD_AD_STATS_NAD_EN | FM_PCD_AD_STATS_OP_CODE);
-+
-+#if (DPAA_VERSION >= 11)
-+    if (p_FmPcdCcStatsParams->h_StatsFLRs)
-+        tmp |= FM_PCD_AD_STATS_FLR_EN;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    WRITE_UINT32(p_StatsAd->nextActionIndx, tmp);
-+
-+    statsCountersAddr = (uint32_t)((XX_VirtToPhys(
-+            p_FmPcdCcStatsParams->h_StatsCounters) - physicalMuramBase));
-+    SetStatsCounters(p_StatsAd, statsCountersAddr);
-+}
-+
-+static void FillAdOfTypeContLookup(t_Handle h_Ad,
-+                                   t_FmPcdCcStatsParams *p_FmPcdCcStatsParams,
-+                                   t_Handle h_FmPcd, t_Handle p_CcNode,
-+                                   t_Handle h_Manip, t_Handle h_FrmReplic)
-+{
-+    t_FmPcdCcNode *p_Node = (t_FmPcdCcNode *)p_CcNode;
-+    t_AdOfTypeContLookup *p_AdContLookup = (t_AdOfTypeContLookup *)h_Ad;
-+    t_Handle h_TmpAd;
-+    t_FmPcd *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint32_t tmpReg32;
-+    t_Handle p_AdNewPtr = NULL;
-+
-+    UNUSED(h_Manip);
-+    UNUSED(h_FrmReplic);
-+
-+    /* there are 3 cases handled in this routine of building a "Continue lookup" type AD.
-+     * Case 1: No Manip. The action descriptor is built within the match table.
-+     *         p_AdResult = p_AdNewPtr;
-+     * Case 2: Manip exists. A new AD is created - p_AdNewPtr. It is initialized
-+     *         either in the FmPcdManipUpdateAdResultForCc routine or it was already
-+     *         initialized and returned here.
-+     *         p_AdResult (within the match table) will be initialized after
-+     *         this routine returns and point to the existing AD.
-+     * Case 3: Manip exists. The action descriptor is built within the match table.
-+     *         FmPcdManipUpdateAdContLookupForCc returns a NULL p_AdNewPtr.
-+     */
-+
-+    /* As default, the "new" ptr is the current one. i.e. the content of the result
-+     * AD will be written into the match table itself (case (1))*/
-+    p_AdNewPtr = p_AdContLookup;
-+
-+    /* Initialize an action descriptor, if current statistics mode requires an Ad */
-+    if (p_FmPcdCcStatsParams)
-+    {
-+        ASSERT_COND(p_FmPcdCcStatsParams->h_StatsAd);
-+        ASSERT_COND(p_FmPcdCcStatsParams->h_StatsCounters);
-+
-+        /* Swapping addresses between statistics Ad and the current lookup AD */
-+        h_TmpAd = p_FmPcdCcStatsParams->h_StatsAd;
-+        p_FmPcdCcStatsParams->h_StatsAd = h_Ad;
-+        h_Ad = h_TmpAd;
-+
-+        p_AdNewPtr = h_Ad;
-+        p_AdContLookup = h_Ad;
-+
-+        /* Init statistics Ad and connect current lookup AD as 'next action' from statistics Ad */
-+        UpdateStatsAd(p_FmPcdCcStatsParams, h_Ad, p_FmPcd->physicalMuramBase);
-+    }
-+
-+#if DPAA_VERSION >= 11
-+    if (h_Manip && h_FrmReplic)
-+        FmPcdManipUpdateAdContLookupForCc(
-+                h_Manip,
-+                h_Ad,
-+                &p_AdNewPtr,
-+                (uint32_t)((XX_VirtToPhys(
-+                        FrmReplicGroupGetSourceTableDescriptor(h_FrmReplic))
-+                        - p_FmPcd->physicalMuramBase)));
-+    else
-+        if (h_FrmReplic)
-+            FrmReplicGroupUpdateAd(h_FrmReplic, h_Ad, &p_AdNewPtr);
-+        else
-+#endif /* (DPAA_VERSION >= 11) */
-+            if (h_Manip)
-+                FmPcdManipUpdateAdContLookupForCc(
-+                        h_Manip,
-+                        h_Ad,
-+                        &p_AdNewPtr,
-+
-+#ifdef FM_CAPWAP_SUPPORT
-+                        /*no check for opcode of manip - this step can be reached only with capwap_applic_specific*/
-+                        (uint32_t)((XX_VirtToPhys(p_Node->h_AdTable) - p_FmPcd->physicalMuramBase))
-+#else  /* not FM_CAPWAP_SUPPORT */
-+                        (uint32_t)((XX_VirtToPhys(p_Node->h_Ad)
-+                                - p_FmPcd->physicalMuramBase))
-+#endif /* not FM_CAPWAP_SUPPORT */
-+                        );
-+
-+    /* if (p_AdNewPtr = NULL) --> Done. (case (3)) */
-+    if (p_AdNewPtr)
-+    {
-+        /* cases (1) & (2) */
-+        tmpReg32 = 0;
-+        tmpReg32 |= FM_PCD_AD_CONT_LOOKUP_TYPE;
-+        tmpReg32 |=
-+                p_Node->sizeOfExtraction ? ((p_Node->sizeOfExtraction - 1) << 24) :
-+                        0;
-+        tmpReg32 |= (uint32_t)(XX_VirtToPhys(p_Node->h_AdTable)
-+                - p_FmPcd->physicalMuramBase);
-+        WRITE_UINT32(p_AdContLookup->ccAdBase, tmpReg32);
-+
-+        tmpReg32 = 0;
-+        tmpReg32 |= p_Node->numOfKeys << 24;
-+        tmpReg32 |= (p_Node->lclMask ? FM_PCD_AD_CONT_LOOKUP_LCL_MASK : 0);
-+        tmpReg32 |=
-+                p_Node->h_KeysMatchTable ? (uint32_t)(XX_VirtToPhys(
-+                        p_Node->h_KeysMatchTable) - p_FmPcd->physicalMuramBase) :
-+                        0;
-+        WRITE_UINT32(p_AdContLookup->matchTblPtr, tmpReg32);
-+
-+        tmpReg32 = 0;
-+        tmpReg32 |= p_Node->prsArrayOffset << 24;
-+        tmpReg32 |= p_Node->offset << 16;
-+        tmpReg32 |= p_Node->parseCode;
-+        WRITE_UINT32(p_AdContLookup->pcAndOffsets, tmpReg32);
-+
-+        MemCpy8((void*)&p_AdContLookup->gmask, p_Node->p_GlblMask,
-+                    CC_GLBL_MASK_SIZE);
-+    }
-+}
-+
-+static t_Error AllocAndFillAdForContLookupManip(t_Handle h_CcNode)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    uint32_t intFlags;
-+
-+    ASSERT_COND(p_CcNode);
-+
-+    intFlags = XX_LockIntrSpinlock(p_CcNode->h_Spinlock);
-+
-+    if (!p_CcNode->h_Ad)
-+    {
-+        if (p_CcNode->maxNumOfKeys)
-+            p_CcNode->h_Ad = p_CcNode->h_TmpAd;
-+        else
-+            p_CcNode->h_Ad = (t_Handle)FM_MURAM_AllocMem(
-+                    ((t_FmPcd *)(p_CcNode->h_FmPcd))->h_FmMuram,
-+                    FM_PCD_CC_AD_ENTRY_SIZE, FM_PCD_CC_AD_TABLE_ALIGN);
-+
-+        XX_UnlockIntrSpinlock(p_CcNode->h_Spinlock, intFlags);
-+
-+        if (!p_CcNode->h_Ad)
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                         ("MURAM allocation for CC action descriptor"));
-+
-+        MemSet8(p_CcNode->h_Ad, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+        FillAdOfTypeContLookup(p_CcNode->h_Ad, NULL, p_CcNode->h_FmPcd,
-+                               p_CcNode, NULL, NULL);
-+    }
-+    else
-+        XX_UnlockIntrSpinlock(p_CcNode->h_Spinlock, intFlags);
-+
-+    return E_OK;
-+}
-+
-+static t_Error SetRequiredAction1(
-+        t_Handle h_FmPcd, uint32_t requiredAction,
-+        t_FmPcdCcKeyAndNextEngineParams *p_CcKeyAndNextEngineParamsTmp,
-+        t_Handle h_AdTmp, uint16_t numOfEntries, t_Handle h_Tree)
-+{
-+    t_AdOfTypeResult *p_AdTmp = (t_AdOfTypeResult *)h_AdTmp;
-+    uint32_t tmpReg32;
-+    t_Error err;
-+    t_FmPcdCcNode *p_CcNode;
-+    int i = 0;
-+    uint16_t tmp = 0;
-+    uint16_t profileId;
-+    uint8_t relativeSchemeId, physicalSchemeId;
-+    t_CcNodeInformation ccNodeInfo;
-+
-+    for (i = 0; i < numOfEntries; i++)
-+    {
-+        if (i == 0)
-+            h_AdTmp = PTR_MOVE(h_AdTmp, i*FM_PCD_CC_AD_ENTRY_SIZE);
-+        else
-+            h_AdTmp = PTR_MOVE(h_AdTmp, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+        switch (p_CcKeyAndNextEngineParamsTmp[i].nextEngineParams.nextEngine)
-+        {
-+            case (e_FM_PCD_CC):
-+                if (requiredAction)
-+                {
-+                    p_CcNode =
-+                            p_CcKeyAndNextEngineParamsTmp[i].nextEngineParams.params.ccParams.h_CcNode;
-+                    ASSERT_COND(p_CcNode);
-+                    if (p_CcNode->shadowAction == requiredAction)
-+                        break;
-+                    if ((requiredAction & UPDATE_CC_WITH_TREE)
-+                            && !(p_CcNode->shadowAction & UPDATE_CC_WITH_TREE))
-+                    {
-+
-+                        memset(&ccNodeInfo, 0, sizeof(t_CcNodeInformation));
-+                        ccNodeInfo.h_CcNode = h_Tree;
-+                        EnqueueNodeInfoToRelevantLst(&p_CcNode->ccTreesLst,
-+                                                     &ccNodeInfo, NULL);
-+                        p_CcKeyAndNextEngineParamsTmp[i].shadowAction |=
-+                                UPDATE_CC_WITH_TREE;
-+                    }
-+                    if ((requiredAction & UPDATE_CC_SHADOW_CLEAR)
-+                            && !(p_CcNode->shadowAction & UPDATE_CC_SHADOW_CLEAR))
-+                    {
-+
-+                        p_CcNode->shadowAction = 0;
-+                    }
-+
-+                    if ((requiredAction & UPDATE_CC_WITH_DELETE_TREE)
-+                            && !(p_CcNode->shadowAction
-+                                    & UPDATE_CC_WITH_DELETE_TREE))
-+                    {
-+                        DequeueNodeInfoFromRelevantLst(&p_CcNode->ccTreesLst,
-+                                                       h_Tree, NULL);
-+                        p_CcKeyAndNextEngineParamsTmp[i].shadowAction |=
-+                                UPDATE_CC_WITH_DELETE_TREE;
-+                    }
-+                    if (p_CcNode->keyAndNextEngineParams[p_CcNode->numOfKeys].nextEngineParams.nextEngine
-+                            != e_FM_PCD_INVALID)
-+                        tmp = (uint8_t)(p_CcNode->numOfKeys + 1);
-+                    else
-+                        tmp = p_CcNode->numOfKeys;
-+                    err = SetRequiredAction1(h_FmPcd, requiredAction,
-+                                             p_CcNode->keyAndNextEngineParams,
-+                                             p_CcNode->h_AdTable, tmp, h_Tree);
-+                    if (err != E_OK)
-+                        return err;
-+                    if (requiredAction != UPDATE_CC_SHADOW_CLEAR)
-+                        p_CcNode->shadowAction |= requiredAction;
-+                }
-+                break;
-+
-+            case (e_FM_PCD_KG):
-+                if ((requiredAction & UPDATE_NIA_ENQ_WITHOUT_DMA)
-+                        && !(p_CcKeyAndNextEngineParamsTmp[i].shadowAction
-+                                & UPDATE_NIA_ENQ_WITHOUT_DMA))
-+                {
-+                    physicalSchemeId =
-+                            FmPcdKgGetSchemeId(
-+                                    p_CcKeyAndNextEngineParamsTmp[i].nextEngineParams.params.kgParams.h_DirectScheme);
-+                    relativeSchemeId = FmPcdKgGetRelativeSchemeId(
-+                            h_FmPcd, physicalSchemeId);
-+                    if (relativeSchemeId == FM_PCD_KG_NUM_OF_SCHEMES)
-+                        RETURN_ERROR(MAJOR, E_NOT_IN_RANGE, NO_MSG);
-+                    if (!FmPcdKgIsSchemeValidSw(
-+                            p_CcKeyAndNextEngineParamsTmp[i].nextEngineParams.params.kgParams.h_DirectScheme))
-+                        RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                                     ("Invalid direct scheme."));
-+                    if (!KgIsSchemeAlwaysDirect(h_FmPcd, relativeSchemeId))
-+                        RETURN_ERROR(
-+                                MAJOR, E_INVALID_STATE,
-+                                ("For this action scheme has to be direct."));
-+                    err =
-+                            FmPcdKgCcGetSetParams(
-+                                    h_FmPcd,
-+                                    p_CcKeyAndNextEngineParamsTmp[i].nextEngineParams.params.kgParams.h_DirectScheme,
-+                                    requiredAction, 0);
-+                    if (err != E_OK)
-+                        RETURN_ERROR(MAJOR, err, NO_MSG);
-+                    p_CcKeyAndNextEngineParamsTmp[i].shadowAction |=
-+                            requiredAction;
-+                }
-+                break;
-+
-+            case (e_FM_PCD_PLCR):
-+                if ((requiredAction & UPDATE_NIA_ENQ_WITHOUT_DMA)
-+                        && !(p_CcKeyAndNextEngineParamsTmp[i].shadowAction
-+                                & UPDATE_NIA_ENQ_WITHOUT_DMA))
-+                {
-+                    if (!p_CcKeyAndNextEngineParamsTmp[i].nextEngineParams.params.plcrParams.overrideParams)
-+                        RETURN_ERROR(
-+                                MAJOR,
-+                                E_NOT_SUPPORTED,
-+                                ("In this initialization only overrideFqid can be initialized"));
-+                    if (!p_CcKeyAndNextEngineParamsTmp[i].nextEngineParams.params.plcrParams.sharedProfile)
-+                        RETURN_ERROR(
-+                                MAJOR,
-+                                E_NOT_SUPPORTED,
-+                                ("In this initialization only overrideFqid can be initialized"));
-+                    err =
-+                            FmPcdPlcrGetAbsoluteIdByProfileParams(
-+                                    h_FmPcd,
-+                                    e_FM_PCD_PLCR_SHARED,
-+                                    NULL,
-+                                    p_CcKeyAndNextEngineParamsTmp[i].nextEngineParams.params.plcrParams.newRelativeProfileId,
-+                                    &profileId);
-+                    if (err != E_OK)
-+                        RETURN_ERROR(MAJOR, err, NO_MSG);
-+                    err = FmPcdPlcrCcGetSetParams(h_FmPcd, profileId,
-+                                                  requiredAction);
-+                    if (err != E_OK)
-+                        RETURN_ERROR(MAJOR, err, NO_MSG);
-+                    p_CcKeyAndNextEngineParamsTmp[i].shadowAction |=
-+                            requiredAction;
-+                }
-+                break;
-+
-+            case (e_FM_PCD_DONE):
-+                if ((requiredAction & UPDATE_NIA_ENQ_WITHOUT_DMA)
-+                        && !(p_CcKeyAndNextEngineParamsTmp[i].shadowAction
-+                                & UPDATE_NIA_ENQ_WITHOUT_DMA))
-+                {
-+                    tmpReg32 = GET_UINT32(p_AdTmp->nia);
-+                    if ((tmpReg32 & GET_NIA_BMI_AC_ENQ_FRAME(h_FmPcd))
-+                            != GET_NIA_BMI_AC_ENQ_FRAME(h_FmPcd))
-+                        RETURN_ERROR(
-+                                MAJOR,
-+                                E_INVALID_STATE,
-+                                ("Next engine was previously assigned not as PCD_DONE"));
-+                    tmpReg32 |= NIA_BMI_AC_ENQ_FRAME_WITHOUT_DMA;
-+                    WRITE_UINT32(p_AdTmp->nia, tmpReg32);
-+                    p_CcKeyAndNextEngineParamsTmp[i].shadowAction |=
-+                            requiredAction;
-+                }
-+                break;
-+
-+            default:
-+                break;
-+        }
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error SetRequiredAction(
-+        t_Handle h_FmPcd, uint32_t requiredAction,
-+        t_FmPcdCcKeyAndNextEngineParams *p_CcKeyAndNextEngineParamsTmp,
-+        t_Handle h_AdTmp, uint16_t numOfEntries, t_Handle h_Tree)
-+{
-+    t_Error err = SetRequiredAction1(h_FmPcd, requiredAction,
-+                                     p_CcKeyAndNextEngineParamsTmp, h_AdTmp,
-+                                     numOfEntries, h_Tree);
-+    if (err != E_OK)
-+        return err;
-+    return SetRequiredAction1(h_FmPcd, UPDATE_CC_SHADOW_CLEAR,
-+                              p_CcKeyAndNextEngineParamsTmp, h_AdTmp,
-+                              numOfEntries, h_Tree);
-+}
-+
-+static t_Error ReleaseModifiedDataStructure(
-+        t_Handle h_FmPcd, t_List *h_FmPcdOldPointersLst,
-+        t_List *h_FmPcdNewPointersLst,
-+        t_FmPcdModifyCcKeyAdditionalParams *p_AdditionalParams,
-+        bool useShadowStructs)
-+{
-+    t_List *p_Pos;
-+    t_Error err = E_OK;
-+    t_CcNodeInformation ccNodeInfo, *p_CcNodeInformation;
-+    t_Handle h_Muram;
-+    t_FmPcdCcNode *p_FmPcdCcNextNode, *p_FmPcdCcWorkingOnNode;
-+    t_List *p_UpdateLst;
-+    uint32_t intFlags;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_AdditionalParams->h_CurrentNode,
-+                              E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcdOldPointersLst, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcdNewPointersLst, E_INVALID_HANDLE);
-+
-+    /* We don't update subtree of the new node with new tree because it was done in the previous stage */
-+    if (p_AdditionalParams->h_NodeForAdd)
-+    {
-+        p_FmPcdCcNextNode = (t_FmPcdCcNode*)p_AdditionalParams->h_NodeForAdd;
-+
-+        if (!p_AdditionalParams->tree)
-+            p_UpdateLst = &p_FmPcdCcNextNode->ccPrevNodesLst;
-+        else
-+            p_UpdateLst = &p_FmPcdCcNextNode->ccTreeIdLst;
-+
-+        p_CcNodeInformation = FindNodeInfoInReleventLst(
-+                p_UpdateLst, p_AdditionalParams->h_CurrentNode,
-+                p_FmPcdCcNextNode->h_Spinlock);
-+
-+        if (p_CcNodeInformation)
-+            p_CcNodeInformation->index++;
-+        else
-+        {
-+            memset(&ccNodeInfo, 0, sizeof(t_CcNodeInformation));
-+            ccNodeInfo.h_CcNode = (t_Handle)p_AdditionalParams->h_CurrentNode;
-+            ccNodeInfo.index = 1;
-+            EnqueueNodeInfoToRelevantLst(p_UpdateLst, &ccNodeInfo,
-+                                         p_FmPcdCcNextNode->h_Spinlock);
-+        }
-+        if (p_AdditionalParams->h_ManipForAdd)
-+        {
-+            p_CcNodeInformation = FindNodeInfoInReleventLst(
-+                    FmPcdManipGetNodeLstPointedOnThisManip(
-+                            p_AdditionalParams->h_ManipForAdd),
-+                    p_AdditionalParams->h_CurrentNode,
-+                    FmPcdManipGetSpinlock(p_AdditionalParams->h_ManipForAdd));
-+
-+            if (p_CcNodeInformation)
-+                p_CcNodeInformation->index++;
-+            else
-+            {
-+                memset(&ccNodeInfo, 0, sizeof(t_CcNodeInformation));
-+                ccNodeInfo.h_CcNode =
-+                        (t_Handle)p_AdditionalParams->h_CurrentNode;
-+                ccNodeInfo.index = 1;
-+                EnqueueNodeInfoToRelevantLst(
-+                        FmPcdManipGetNodeLstPointedOnThisManip(
-+                                p_AdditionalParams->h_ManipForAdd),
-+                        &ccNodeInfo,
-+                        FmPcdManipGetSpinlock(
-+                                p_AdditionalParams->h_ManipForAdd));
-+            }
-+        }
-+    }
-+
-+    if (p_AdditionalParams->h_NodeForRmv)
-+    {
-+        p_FmPcdCcNextNode = (t_FmPcdCcNode*)p_AdditionalParams->h_NodeForRmv;
-+
-+        if (!p_AdditionalParams->tree)
-+        {
-+            p_UpdateLst = &p_FmPcdCcNextNode->ccPrevNodesLst;
-+            p_FmPcdCcWorkingOnNode =
-+                    (t_FmPcdCcNode *)(p_AdditionalParams->h_CurrentNode);
-+
-+            for (p_Pos = LIST_FIRST(&p_FmPcdCcWorkingOnNode->ccTreesLst);
-+                    p_Pos != (&p_FmPcdCcWorkingOnNode->ccTreesLst); p_Pos =
-+                            LIST_NEXT(p_Pos))
-+            {
-+                p_CcNodeInformation = CC_NODE_F_OBJECT(p_Pos);
-+
-+                ASSERT_COND(p_CcNodeInformation->h_CcNode);
-+
-+                err =
-+                        SetRequiredAction(
-+                                h_FmPcd,
-+                                UPDATE_CC_WITH_DELETE_TREE,
-+                                &((t_FmPcdCcNode *)(p_AdditionalParams->h_CurrentNode))->keyAndNextEngineParams[p_AdditionalParams->savedKeyIndex],
-+                                PTR_MOVE(((t_FmPcdCcNode *)(p_AdditionalParams->h_CurrentNode))->h_AdTable, p_AdditionalParams->savedKeyIndex*FM_PCD_CC_AD_ENTRY_SIZE),
-+                                1, p_CcNodeInformation->h_CcNode);
-+            }
-+        }
-+        else
-+        {
-+            p_UpdateLst = &p_FmPcdCcNextNode->ccTreeIdLst;
-+
-+            err =
-+                    SetRequiredAction(
-+                            h_FmPcd,
-+                            UPDATE_CC_WITH_DELETE_TREE,
-+                            &((t_FmPcdCcTree *)(p_AdditionalParams->h_CurrentNode))->keyAndNextEngineParams[p_AdditionalParams->savedKeyIndex],
-+                            UINT_TO_PTR(((t_FmPcdCcTree *)(p_AdditionalParams->h_CurrentNode))->ccTreeBaseAddr + p_AdditionalParams->savedKeyIndex*FM_PCD_CC_AD_ENTRY_SIZE),
-+                            1, p_AdditionalParams->h_CurrentNode);
-+        }
-+        if (err)
-+            return err;
-+
-+        /* We remove from the subtree of the removed node tree because it wasn't done in the previous stage
-+         Update ccPrevNodesLst or ccTreeIdLst of the removed node
-+         Update of the node owner */
-+        p_CcNodeInformation = FindNodeInfoInReleventLst(
-+                p_UpdateLst, p_AdditionalParams->h_CurrentNode,
-+                p_FmPcdCcNextNode->h_Spinlock);
-+
-+        ASSERT_COND(p_CcNodeInformation);
-+        ASSERT_COND(p_CcNodeInformation->index);
-+
-+        p_CcNodeInformation->index--;
-+
-+        if (p_CcNodeInformation->index == 0)
-+            DequeueNodeInfoFromRelevantLst(p_UpdateLst,
-+                                           p_AdditionalParams->h_CurrentNode,
-+                                           p_FmPcdCcNextNode->h_Spinlock);
-+
-+        UpdateNodeOwner(p_FmPcdCcNextNode, FALSE);
-+
-+        if (p_AdditionalParams->h_ManipForRmv)
-+        {
-+            p_CcNodeInformation = FindNodeInfoInReleventLst(
-+                    FmPcdManipGetNodeLstPointedOnThisManip(
-+                            p_AdditionalParams->h_ManipForRmv),
-+                    p_AdditionalParams->h_CurrentNode,
-+                    FmPcdManipGetSpinlock(p_AdditionalParams->h_ManipForRmv));
-+
-+            ASSERT_COND(p_CcNodeInformation);
-+            ASSERT_COND(p_CcNodeInformation->index);
-+
-+            p_CcNodeInformation->index--;
-+
-+            if (p_CcNodeInformation->index == 0)
-+                DequeueNodeInfoFromRelevantLst(
-+                        FmPcdManipGetNodeLstPointedOnThisManip(
-+                                p_AdditionalParams->h_ManipForRmv),
-+                        p_AdditionalParams->h_CurrentNode,
-+                        FmPcdManipGetSpinlock(
-+                                p_AdditionalParams->h_ManipForRmv));
-+        }
-+    }
-+
-+    if (p_AdditionalParams->h_ManipForRmv)
-+        FmPcdManipUpdateOwner(p_AdditionalParams->h_ManipForRmv, FALSE);
-+
-+    if (p_AdditionalParams->p_StatsObjForRmv)
-+        PutStatsObj((t_FmPcdCcNode *)(p_AdditionalParams->h_CurrentNode),
-+                    p_AdditionalParams->p_StatsObjForRmv);
-+
-+#if (DPAA_VERSION >= 11)
-+    if (p_AdditionalParams->h_FrmReplicForRmv)
-+        FrmReplicGroupUpdateOwner(p_AdditionalParams->h_FrmReplicForRmv,
-+                                  FALSE/* remove */);
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    if (!useShadowStructs)
-+    {
-+        h_Muram = FmPcdGetMuramHandle(h_FmPcd);
-+        ASSERT_COND(h_Muram);
-+
-+        if ((p_AdditionalParams->tree && !((t_FmPcd *)h_FmPcd)->p_CcShadow)
-+                || (!p_AdditionalParams->tree
-+                        && !((t_FmPcdCcNode *)(p_AdditionalParams->h_CurrentNode))->maxNumOfKeys))
-+        {
-+            /* We release new AD which was allocated and updated for copy from to actual AD */
-+            for (p_Pos = LIST_FIRST(h_FmPcdNewPointersLst);
-+                    p_Pos != (h_FmPcdNewPointersLst); p_Pos = LIST_NEXT(p_Pos))
-+            {
-+
-+                p_CcNodeInformation = CC_NODE_F_OBJECT(p_Pos);
-+                ASSERT_COND(p_CcNodeInformation->h_CcNode);
-+                FM_MURAM_FreeMem(h_Muram, p_CcNodeInformation->h_CcNode);
-+            }
-+        }
-+
-+        /* Free Old data structure if it has to be freed - new data structure was allocated*/
-+        if (p_AdditionalParams->p_AdTableOld)
-+            FM_MURAM_FreeMem(h_Muram, p_AdditionalParams->p_AdTableOld);
-+
-+        if (p_AdditionalParams->p_KeysMatchTableOld)
-+            FM_MURAM_FreeMem(h_Muram, p_AdditionalParams->p_KeysMatchTableOld);
-+    }
-+
-+    /* Update current modified node with changed fields if it's required*/
-+    if (!p_AdditionalParams->tree)
-+    {
-+        if (p_AdditionalParams->p_AdTableNew)
-+            ((t_FmPcdCcNode *)(p_AdditionalParams->h_CurrentNode))->h_AdTable =
-+                    p_AdditionalParams->p_AdTableNew;
-+
-+        if (p_AdditionalParams->p_KeysMatchTableNew)
-+            ((t_FmPcdCcNode *)(p_AdditionalParams->h_CurrentNode))->h_KeysMatchTable =
-+                    p_AdditionalParams->p_KeysMatchTableNew;
-+
-+        /* Locking node's spinlock before updating 'keys and next engine' structure,
-+         as it maybe used to retrieve keys statistics */
-+        intFlags =
-+                XX_LockIntrSpinlock(
-+                        ((t_FmPcdCcNode *)(p_AdditionalParams->h_CurrentNode))->h_Spinlock);
-+
-+        ((t_FmPcdCcNode *)(p_AdditionalParams->h_CurrentNode))->numOfKeys =
-+                p_AdditionalParams->numOfKeys;
-+
-+        memcpy(((t_FmPcdCcNode *)(p_AdditionalParams->h_CurrentNode))->keyAndNextEngineParams,
-+               &p_AdditionalParams->keyAndNextEngineParams,
-+               sizeof(t_FmPcdCcKeyAndNextEngineParams) * (CC_MAX_NUM_OF_KEYS));
-+
-+        XX_UnlockIntrSpinlock(
-+                ((t_FmPcdCcNode *)(p_AdditionalParams->h_CurrentNode))->h_Spinlock,
-+                intFlags);
-+    }
-+    else
-+    {
-+        uint8_t numEntries =
-+                ((t_FmPcdCcTree *)(p_AdditionalParams->h_CurrentNode))->numOfEntries;
-+        ASSERT_COND(numEntries < FM_PCD_MAX_NUM_OF_CC_GROUPS);
-+        memcpy(&((t_FmPcdCcTree *)(p_AdditionalParams->h_CurrentNode))->keyAndNextEngineParams,
-+               &p_AdditionalParams->keyAndNextEngineParams,
-+               sizeof(t_FmPcdCcKeyAndNextEngineParams) * numEntries);
-+    }
-+
-+    ReleaseLst(h_FmPcdOldPointersLst);
-+    ReleaseLst(h_FmPcdNewPointersLst);
-+
-+    XX_Free(p_AdditionalParams);
-+
-+    return E_OK;
-+}
-+
-+static t_Handle BuildNewAd(
-+        t_Handle h_Ad,
-+        t_FmPcdModifyCcKeyAdditionalParams *p_FmPcdModifyCcKeyAdditionalParams,
-+        t_FmPcdCcNode *p_CcNode,
-+        t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams)
-+{
-+    t_FmPcdCcNode *p_FmPcdCcNodeTmp;
-+    t_Handle h_OrigAd = NULL;
-+
-+    p_FmPcdCcNodeTmp = (t_FmPcdCcNode*)XX_Malloc(sizeof(t_FmPcdCcNode));
-+    if (!p_FmPcdCcNodeTmp)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("p_FmPcdCcNodeTmp"));
-+        return NULL;
-+    }
-+    memset(p_FmPcdCcNodeTmp, 0, sizeof(t_FmPcdCcNode));
-+
-+    p_FmPcdCcNodeTmp->numOfKeys = p_FmPcdModifyCcKeyAdditionalParams->numOfKeys;
-+    p_FmPcdCcNodeTmp->h_KeysMatchTable =
-+            p_FmPcdModifyCcKeyAdditionalParams->p_KeysMatchTableNew;
-+    p_FmPcdCcNodeTmp->h_AdTable =
-+            p_FmPcdModifyCcKeyAdditionalParams->p_AdTableNew;
-+
-+    p_FmPcdCcNodeTmp->lclMask = p_CcNode->lclMask;
-+    p_FmPcdCcNodeTmp->parseCode = p_CcNode->parseCode;
-+    p_FmPcdCcNodeTmp->offset = p_CcNode->offset;
-+    p_FmPcdCcNodeTmp->prsArrayOffset = p_CcNode->prsArrayOffset;
-+    p_FmPcdCcNodeTmp->ctrlFlow = p_CcNode->ctrlFlow;
-+    p_FmPcdCcNodeTmp->ccKeySizeAccExtraction = p_CcNode->ccKeySizeAccExtraction;
-+    p_FmPcdCcNodeTmp->sizeOfExtraction = p_CcNode->sizeOfExtraction;
-+    p_FmPcdCcNodeTmp->glblMaskSize = p_CcNode->glblMaskSize;
-+    p_FmPcdCcNodeTmp->p_GlblMask = p_CcNode->p_GlblMask;
-+
-+    if (p_FmPcdCcNextEngineParams->nextEngine == e_FM_PCD_CC)
-+    {
-+        if (p_FmPcdCcNextEngineParams->h_Manip)
-+        {
-+            h_OrigAd = p_CcNode->h_Ad;
-+            if (AllocAndFillAdForContLookupManip(
-+                    p_FmPcdCcNextEngineParams->params.ccParams.h_CcNode)
-+                    != E_OK)
-+            {
-+                REPORT_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+                XX_Free(p_FmPcdCcNodeTmp);
-+                return NULL;
-+            }
-+        }
-+        FillAdOfTypeContLookup(h_Ad, NULL, p_CcNode->h_FmPcd, p_FmPcdCcNodeTmp,
-+                               h_OrigAd ? NULL : p_FmPcdCcNextEngineParams->h_Manip, NULL);
-+    }
-+
-+#if (DPAA_VERSION >= 11)
-+    if ((p_FmPcdCcNextEngineParams->nextEngine == e_FM_PCD_FR)
-+            && (p_FmPcdCcNextEngineParams->params.frParams.h_FrmReplic))
-+    {
-+        FillAdOfTypeContLookup(
-+                h_Ad, NULL, p_CcNode->h_FmPcd, p_FmPcdCcNodeTmp,
-+                p_FmPcdCcNextEngineParams->h_Manip,
-+                p_FmPcdCcNextEngineParams->params.frParams.h_FrmReplic);
-+    }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    XX_Free(p_FmPcdCcNodeTmp);
-+
-+    return E_OK;
-+}
-+
-+static t_Error DynamicChangeHc(
-+        t_Handle h_FmPcd, t_List *h_OldPointersLst, t_List *h_NewPointersLst,
-+        t_FmPcdModifyCcKeyAdditionalParams *p_AdditionalParams,
-+        bool useShadowStructs)
-+{
-+    t_List *p_PosOld, *p_PosNew;
-+    uint32_t oldAdAddrOffset, newAdAddrOffset;
-+    uint16_t i = 0;
-+    t_Error err = E_OK;
-+    uint8_t numOfModifiedPtr;
-+
-+    ASSERT_COND(h_FmPcd);
-+    ASSERT_COND(h_OldPointersLst);
-+    ASSERT_COND(h_NewPointersLst);
-+
-+    numOfModifiedPtr = (uint8_t)LIST_NumOfObjs(h_OldPointersLst);
-+
-+    if (numOfModifiedPtr)
-+    {
-+        p_PosNew = LIST_FIRST(h_NewPointersLst);
-+        p_PosOld = LIST_FIRST(h_OldPointersLst);
-+
-+        /* Retrieve address of new AD */
-+        newAdAddrOffset = FmPcdCcGetNodeAddrOffsetFromNodeInfo(h_FmPcd,
-+                                                               p_PosNew);
-+        if (newAdAddrOffset == (uint32_t)ILLEGAL_BASE)
-+        {
-+            ReleaseModifiedDataStructure(h_FmPcd, h_OldPointersLst,
-+                                         h_NewPointersLst,
-+                                         p_AdditionalParams, useShadowStructs);
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("New AD address"));
-+        }
-+
-+        for (i = 0; i < numOfModifiedPtr; i++)
-+        {
-+            /* Retrieve address of current AD */
-+            oldAdAddrOffset = FmPcdCcGetNodeAddrOffsetFromNodeInfo(h_FmPcd,
-+                                                                   p_PosOld);
-+            if (oldAdAddrOffset == (uint32_t)ILLEGAL_BASE)
-+            {
-+                ReleaseModifiedDataStructure(h_FmPcd, h_OldPointersLst,
-+                                             h_NewPointersLst,
-+                                             p_AdditionalParams,
-+                                             useShadowStructs);
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Old AD address"));
-+            }
-+
-+            /* Invoke host command to copy from new AD to old AD */
-+            err = FmHcPcdCcDoDynamicChange(((t_FmPcd *)h_FmPcd)->h_Hc,
-+                                           oldAdAddrOffset, newAdAddrOffset);
-+            if (err)
-+            {
-+                ReleaseModifiedDataStructure(h_FmPcd, h_OldPointersLst,
-+                                             h_NewPointersLst,
-+                                             p_AdditionalParams,
-+                                             useShadowStructs);
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        err,
-+                        ("For part of nodes changes are done - situation is danger"));
-+            }
-+
-+            p_PosOld = LIST_NEXT(p_PosOld);
-+        }
-+    }
-+    return E_OK;
-+}
-+
-+static t_Error DoDynamicChange(
-+        t_Handle h_FmPcd, t_List *h_OldPointersLst, t_List *h_NewPointersLst,
-+        t_FmPcdModifyCcKeyAdditionalParams *p_AdditionalParams,
-+        bool useShadowStructs)
-+{
-+    t_FmPcdCcNode *p_CcNode =
-+            (t_FmPcdCcNode *)(p_AdditionalParams->h_CurrentNode);
-+    t_List *p_PosNew;
-+    t_CcNodeInformation *p_CcNodeInfo;
-+    t_FmPcdCcNextEngineParams nextEngineParams;
-+    t_Handle h_Ad;
-+    uint32_t keySize;
-+    t_Error err = E_OK;
-+    uint8_t numOfModifiedPtr;
-+
-+    ASSERT_COND(h_FmPcd);
-+
-+    memset(&nextEngineParams, 0, sizeof(t_FmPcdCcNextEngineParams));
-+
-+    numOfModifiedPtr = (uint8_t)LIST_NumOfObjs(h_OldPointersLst);
-+
-+    if (numOfModifiedPtr)
-+    {
-+
-+        p_PosNew = LIST_FIRST(h_NewPointersLst);
-+
-+        /* Invoke host-command to copy from the new Ad to existing Ads */
-+        err = DynamicChangeHc(h_FmPcd, h_OldPointersLst, h_NewPointersLst,
-+                              p_AdditionalParams, useShadowStructs);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+		if (useShadowStructs)
-+		{
-+			/* When the host-command above has ended, the old structures are 'free'and we can update
-+			 them by copying from the new shadow structures. */
-+			if (p_CcNode->lclMask)
-+				keySize = (uint32_t)(2 * p_CcNode->ccKeySizeAccExtraction);
-+			else
-+				keySize = p_CcNode->ccKeySizeAccExtraction;
-+
-+			MemCpy8(p_AdditionalParams->p_KeysMatchTableOld,
-+					   p_AdditionalParams->p_KeysMatchTableNew,
-+					   p_CcNode->maxNumOfKeys * keySize * sizeof(uint8_t));
-+
-+			MemCpy8(
-+					p_AdditionalParams->p_AdTableOld,
-+					p_AdditionalParams->p_AdTableNew,
-+					(uint32_t)((p_CcNode->maxNumOfKeys + 1)
-+							* FM_PCD_CC_AD_ENTRY_SIZE));
-+
-+			/* Retrieve the address of the allocated Ad */
-+			p_CcNodeInfo = CC_NODE_F_OBJECT(p_PosNew);
-+			h_Ad = p_CcNodeInfo->h_CcNode;
-+
-+			/* Build a new Ad that holds the old (now updated) structures */
-+			p_AdditionalParams->p_KeysMatchTableNew =
-+					p_AdditionalParams->p_KeysMatchTableOld;
-+			p_AdditionalParams->p_AdTableNew = p_AdditionalParams->p_AdTableOld;
-+
-+			nextEngineParams.nextEngine = e_FM_PCD_CC;
-+			nextEngineParams.params.ccParams.h_CcNode = (t_Handle)p_CcNode;
-+
-+			BuildNewAd(h_Ad, p_AdditionalParams, p_CcNode, &nextEngineParams);
-+
-+			/* HC to copy from the new Ad (old updated structures) to current Ad (uses shadow structures) */
-+			err = DynamicChangeHc(h_FmPcd, h_OldPointersLst, h_NewPointersLst,
-+								  p_AdditionalParams, useShadowStructs);
-+			if (err)
-+				RETURN_ERROR(MAJOR, err, NO_MSG);
-+		}
-+    }
-+
-+    err = ReleaseModifiedDataStructure(h_FmPcd, h_OldPointersLst,
-+                                       h_NewPointersLst,
-+                                       p_AdditionalParams, useShadowStructs);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+#ifdef FM_CAPWAP_SUPPORT
-+static bool IsCapwapApplSpecific(t_Handle h_Node)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_Node;
-+    bool isManipForCapwapApplSpecificBuild = FALSE;
-+    int i = 0;
-+
-+    ASSERT_COND(h_Node);
-+    /* assumption that this function called only for INDEXED_FLOW_ID - so no miss*/
-+    for (i = 0; i < p_CcNode->numOfKeys; i++)
-+    {
-+        if ( p_CcNode->keyAndNextEngineParams[i].nextEngineParams.h_Manip &&
-+                FmPcdManipIsCapwapApplSpecific(p_CcNode->keyAndNextEngineParams[i].nextEngineParams.h_Manip))
-+        {
-+            isManipForCapwapApplSpecificBuild = TRUE;
-+            break;
-+        }
-+    }
-+    return isManipForCapwapApplSpecificBuild;
-+
-+}
-+#endif /* FM_CAPWAP_SUPPORT */
-+
-+static t_Error CcUpdateParam(
-+        t_Handle h_FmPcd, t_Handle h_PcdParams, t_Handle h_FmPort,
-+        t_FmPcdCcKeyAndNextEngineParams *p_CcKeyAndNextEngineParams,
-+        uint16_t numOfEntries, t_Handle h_Ad, bool validate, uint16_t level,
-+        t_Handle h_FmTree, bool modify)
-+{
-+    t_FmPcdCcNode *p_CcNode;
-+    t_Error err;
-+    uint16_t tmp = 0;
-+    int i = 0;
-+    t_FmPcdCcTree *p_CcTree = (t_FmPcdCcTree *)h_FmTree;
-+
-+    level++;
-+
-+    if (p_CcTree->h_IpReassemblyManip)
-+    {
-+        err = FmPcdManipUpdate(h_FmPcd, h_PcdParams, h_FmPort,
-+                               p_CcTree->h_IpReassemblyManip, NULL, validate,
-+                               level, h_FmTree, modify);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    if (p_CcTree->h_CapwapReassemblyManip)
-+    {
-+        err = FmPcdManipUpdate(h_FmPcd, h_PcdParams, h_FmPort,
-+                               p_CcTree->h_CapwapReassemblyManip, NULL, validate,
-+                               level, h_FmTree, modify);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    if (numOfEntries)
-+    {
-+        for (i = 0; i < numOfEntries; i++)
-+        {
-+            if (i == 0)
-+                h_Ad = PTR_MOVE(h_Ad, i*FM_PCD_CC_AD_ENTRY_SIZE);
-+            else
-+                h_Ad = PTR_MOVE(h_Ad, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+            if (p_CcKeyAndNextEngineParams[i].nextEngineParams.nextEngine
-+                    == e_FM_PCD_CC)
-+            {
-+                p_CcNode =
-+                        p_CcKeyAndNextEngineParams[i].nextEngineParams.params.ccParams.h_CcNode;
-+                ASSERT_COND(p_CcNode);
-+
-+                if (p_CcKeyAndNextEngineParams[i].nextEngineParams.h_Manip)
-+                {
-+                    err =
-+                            FmPcdManipUpdate(
-+                                    h_FmPcd,
-+                                    NULL,
-+                                    h_FmPort,
-+                                    p_CcKeyAndNextEngineParams[i].nextEngineParams.h_Manip,
-+                                    h_Ad, validate, level, h_FmTree, modify);
-+                    if (err)
-+                        RETURN_ERROR(MAJOR, err, NO_MSG);
-+                }
-+
-+                if (p_CcNode->keyAndNextEngineParams[p_CcNode->numOfKeys].nextEngineParams.nextEngine
-+                        != e_FM_PCD_INVALID)
-+                    tmp = (uint8_t)(p_CcNode->numOfKeys + 1);
-+                else
-+                    tmp = p_CcNode->numOfKeys;
-+
-+                err = CcUpdateParam(h_FmPcd, h_PcdParams, h_FmPort,
-+                                    p_CcNode->keyAndNextEngineParams, tmp,
-+                                    p_CcNode->h_AdTable, validate, level,
-+                                    h_FmTree, modify);
-+                if (err)
-+                    RETURN_ERROR(MAJOR, err, NO_MSG);
-+            }
-+            else
-+            {
-+                if (p_CcKeyAndNextEngineParams[i].nextEngineParams.h_Manip)
-+                {
-+                    err =
-+                            FmPcdManipUpdate(
-+                                    h_FmPcd,
-+                                    NULL,
-+                                    h_FmPort,
-+                                    p_CcKeyAndNextEngineParams[i].nextEngineParams.h_Manip,
-+                                    h_Ad, validate, level, h_FmTree, modify);
-+                    if (err)
-+                        RETURN_ERROR(MAJOR, err, NO_MSG);
-+                }
-+            }
-+        }
-+    }
-+
-+    return E_OK;
-+}
-+
-+static ccPrivateInfo_t IcDefineCode(t_FmPcdCcNodeParams *p_CcNodeParam)
-+{
-+    switch (p_CcNodeParam->extractCcParams.extractNonHdr.action)
-+    {
-+        case (e_FM_PCD_ACTION_EXACT_MATCH):
-+            switch (p_CcNodeParam->extractCcParams.extractNonHdr.src)
-+            {
-+                case (e_FM_PCD_EXTRACT_FROM_KEY):
-+                    return CC_PRIVATE_INFO_IC_KEY_EXACT_MATCH;
-+                case (e_FM_PCD_EXTRACT_FROM_HASH):
-+                    return CC_PRIVATE_INFO_IC_HASH_EXACT_MATCH;
-+                default:
-+                    return CC_PRIVATE_INFO_NONE;
-+            }
-+
-+        case (e_FM_PCD_ACTION_INDEXED_LOOKUP):
-+            switch (p_CcNodeParam->extractCcParams.extractNonHdr.src)
-+            {
-+                case (e_FM_PCD_EXTRACT_FROM_HASH):
-+                    return CC_PRIVATE_INFO_IC_HASH_INDEX_LOOKUP;
-+                case (e_FM_PCD_EXTRACT_FROM_FLOW_ID):
-+                    return CC_PRIVATE_INFO_IC_DEQ_FQID_INDEX_LOOKUP;
-+                default:
-+                    return CC_PRIVATE_INFO_NONE;
-+            }
-+
-+        default:
-+            break;
-+    }
-+
-+    return CC_PRIVATE_INFO_NONE;
-+}
-+
-+static t_CcNodeInformation * DequeueAdditionalInfoFromRelevantLst(
-+        t_List *p_List)
-+{
-+    t_CcNodeInformation *p_CcNodeInfo = NULL;
-+
-+    if (!LIST_IsEmpty(p_List))
-+    {
-+        p_CcNodeInfo = CC_NODE_F_OBJECT(p_List->p_Next);
-+        LIST_DelAndInit(&p_CcNodeInfo->node);
-+    }
-+
-+    return p_CcNodeInfo;
-+}
-+
-+void ReleaseLst(t_List *p_List)
-+{
-+    t_CcNodeInformation *p_CcNodeInfo = NULL;
-+
-+    if (!LIST_IsEmpty(p_List))
-+    {
-+        p_CcNodeInfo = DequeueAdditionalInfoFromRelevantLst(p_List);
-+        while (p_CcNodeInfo)
-+        {
-+            XX_Free(p_CcNodeInfo);
-+            p_CcNodeInfo = DequeueAdditionalInfoFromRelevantLst(p_List);
-+        }
-+    }
-+
-+    LIST_Del(p_List);
-+}
-+
-+static void DeleteNode(t_FmPcdCcNode *p_CcNode)
-+{
-+    uint32_t i;
-+
-+    if (!p_CcNode)
-+        return;
-+
-+    if (p_CcNode->p_GlblMask)
-+    {
-+        XX_Free(p_CcNode->p_GlblMask);
-+        p_CcNode->p_GlblMask = NULL;
-+    }
-+
-+    if (p_CcNode->h_KeysMatchTable)
-+    {
-+        FM_MURAM_FreeMem(FmPcdGetMuramHandle(p_CcNode->h_FmPcd),
-+                         p_CcNode->h_KeysMatchTable);
-+        p_CcNode->h_KeysMatchTable = NULL;
-+    }
-+
-+    if (p_CcNode->h_AdTable)
-+    {
-+        FM_MURAM_FreeMem(FmPcdGetMuramHandle(p_CcNode->h_FmPcd),
-+                         p_CcNode->h_AdTable);
-+        p_CcNode->h_AdTable = NULL;
-+    }
-+
-+    if (p_CcNode->h_Ad)
-+    {
-+        FM_MURAM_FreeMem(FmPcdGetMuramHandle(p_CcNode->h_FmPcd),
-+                         p_CcNode->h_Ad);
-+        p_CcNode->h_Ad = NULL;
-+        p_CcNode->h_TmpAd = NULL;
-+    }
-+
-+    if (p_CcNode->h_StatsFLRs)
-+    {
-+        FM_MURAM_FreeMem(FmPcdGetMuramHandle(p_CcNode->h_FmPcd),
-+                         p_CcNode->h_StatsFLRs);
-+        p_CcNode->h_StatsFLRs = NULL;
-+    }
-+
-+    if (p_CcNode->h_Spinlock)
-+    {
-+        XX_FreeSpinlock(p_CcNode->h_Spinlock);
-+        p_CcNode->h_Spinlock = NULL;
-+    }
-+
-+    /* Restore the original counters pointer instead of the mutual pointer (mutual to all hash buckets) */
-+    if (p_CcNode->isHashBucket
-+            && (p_CcNode->statisticsMode != e_FM_PCD_CC_STATS_MODE_NONE))
-+        p_CcNode->keyAndNextEngineParams[p_CcNode->numOfKeys].p_StatsObj->h_StatsCounters =
-+                p_CcNode->h_PrivMissStatsCounters;
-+
-+    /* Releasing all currently used statistics objects, including 'miss' entry */
-+    for (i = 0; i < p_CcNode->numOfKeys + 1; i++)
-+        if (p_CcNode->keyAndNextEngineParams[i].p_StatsObj)
-+            PutStatsObj(p_CcNode,
-+                        p_CcNode->keyAndNextEngineParams[i].p_StatsObj);
-+
-+    if (!LIST_IsEmpty(&p_CcNode->availableStatsLst))
-+    {
-+        t_Handle h_FmMuram = FmPcdGetMuramHandle(p_CcNode->h_FmPcd);
-+        ASSERT_COND(h_FmMuram);
-+
-+        FreeStatObjects(&p_CcNode->availableStatsLst, h_FmMuram);
-+    }
-+
-+    LIST_Del(&p_CcNode->availableStatsLst);
-+
-+	ReleaseLst(&p_CcNode->availableStatsLst);
-+    ReleaseLst(&p_CcNode->ccPrevNodesLst);
-+    ReleaseLst(&p_CcNode->ccTreeIdLst);
-+    ReleaseLst(&p_CcNode->ccTreesLst);
-+
-+    XX_Free(p_CcNode);
-+}
-+
-+static void DeleteTree(t_FmPcdCcTree *p_FmPcdTree, t_FmPcd *p_FmPcd)
-+{
-+    if (p_FmPcdTree)
-+    {
-+        if (p_FmPcdTree->ccTreeBaseAddr)
-+        {
-+            FM_MURAM_FreeMem(FmPcdGetMuramHandle(p_FmPcd),
-+                             UINT_TO_PTR(p_FmPcdTree->ccTreeBaseAddr));
-+            p_FmPcdTree->ccTreeBaseAddr = 0;
-+        }
-+
-+        ReleaseLst(&p_FmPcdTree->fmPortsLst);
-+
-+        XX_Free(p_FmPcdTree);
-+    }
-+}
-+
-+static void GetCcExtractKeySize(uint8_t parseCodeRealSize,
-+                                uint8_t *parseCodeCcSize)
-+{
-+    if ((parseCodeRealSize > 0) && (parseCodeRealSize < 2))
-+        *parseCodeCcSize = 1;
-+    else
-+        if (parseCodeRealSize == 2)
-+            *parseCodeCcSize = 2;
-+        else
-+            if ((parseCodeRealSize > 2) && (parseCodeRealSize <= 4))
-+                *parseCodeCcSize = 4;
-+            else
-+                if ((parseCodeRealSize > 4) && (parseCodeRealSize <= 8))
-+                    *parseCodeCcSize = 8;
-+                else
-+                    if ((parseCodeRealSize > 8) && (parseCodeRealSize <= 16))
-+                        *parseCodeCcSize = 16;
-+                    else
-+                        if ((parseCodeRealSize > 16)
-+                                && (parseCodeRealSize <= 24))
-+                            *parseCodeCcSize = 24;
-+                        else
-+                            if ((parseCodeRealSize > 24)
-+                                    && (parseCodeRealSize <= 32))
-+                                *parseCodeCcSize = 32;
-+                            else
-+                                if ((parseCodeRealSize > 32)
-+                                        && (parseCodeRealSize <= 40))
-+                                    *parseCodeCcSize = 40;
-+                                else
-+                                    if ((parseCodeRealSize > 40)
-+                                            && (parseCodeRealSize <= 48))
-+                                        *parseCodeCcSize = 48;
-+                                    else
-+                                        if ((parseCodeRealSize > 48)
-+                                                && (parseCodeRealSize <= 56))
-+                                            *parseCodeCcSize = 56;
-+                                        else
-+                                            *parseCodeCcSize = 0;
-+}
-+
-+static void GetSizeHeaderField(e_NetHeaderType hdr, t_FmPcdFields field,
-+		                       uint8_t *parseCodeRealSize)
-+{
-+    switch (hdr)
-+    {
-+        case (HEADER_TYPE_ETH):
-+            switch (field.eth)
-+            {
-+                case (NET_HEADER_FIELD_ETH_DA):
-+                    *parseCodeRealSize = 6;
-+                    break;
-+
-+                case (NET_HEADER_FIELD_ETH_SA):
-+                    *parseCodeRealSize = 6;
-+                    break;
-+
-+                case (NET_HEADER_FIELD_ETH_TYPE):
-+                    *parseCodeRealSize = 2;
-+                    break;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported1"));
-+                    *parseCodeRealSize = CC_SIZE_ILLEGAL;
-+                    break;
-+            }
-+            break;
-+
-+        case (HEADER_TYPE_PPPoE):
-+            switch (field.pppoe)
-+            {
-+                case (NET_HEADER_FIELD_PPPoE_PID):
-+                    *parseCodeRealSize = 2;
-+                    break;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported1"));
-+                    *parseCodeRealSize = CC_SIZE_ILLEGAL;
-+                    break;
-+            }
-+            break;
-+
-+        case (HEADER_TYPE_VLAN):
-+            switch (field.vlan)
-+            {
-+                case (NET_HEADER_FIELD_VLAN_TCI):
-+                    *parseCodeRealSize = 2;
-+                    break;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported2"));
-+                    *parseCodeRealSize = CC_SIZE_ILLEGAL;
-+                    break;
-+            }
-+            break;
-+
-+        case (HEADER_TYPE_MPLS):
-+            switch (field.mpls)
-+            {
-+                case (NET_HEADER_FIELD_MPLS_LABEL_STACK):
-+                    *parseCodeRealSize = 4;
-+                    break;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported3"));
-+                    *parseCodeRealSize = CC_SIZE_ILLEGAL;
-+                    break;
-+            }
-+            break;
-+
-+        case (HEADER_TYPE_IPv4):
-+            switch (field.ipv4)
-+            {
-+                case (NET_HEADER_FIELD_IPv4_DST_IP):
-+                case (NET_HEADER_FIELD_IPv4_SRC_IP):
-+                    *parseCodeRealSize = 4;
-+                    break;
-+
-+                case (NET_HEADER_FIELD_IPv4_TOS):
-+                case (NET_HEADER_FIELD_IPv4_PROTO):
-+                    *parseCodeRealSize = 1;
-+                    break;
-+
-+                case (NET_HEADER_FIELD_IPv4_DST_IP
-+                        | NET_HEADER_FIELD_IPv4_SRC_IP):
-+                    *parseCodeRealSize = 8;
-+                    break;
-+
-+                case (NET_HEADER_FIELD_IPv4_TTL):
-+                    *parseCodeRealSize = 1;
-+                    break;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported4"));
-+                    *parseCodeRealSize = CC_SIZE_ILLEGAL;
-+                    break;
-+            }
-+            break;
-+
-+        case (HEADER_TYPE_IPv6):
-+            switch (field.ipv6)
-+            {
-+                case (NET_HEADER_FIELD_IPv6_VER | NET_HEADER_FIELD_IPv6_FL
-+                        | NET_HEADER_FIELD_IPv6_TC):
-+                    *parseCodeRealSize = 4;
-+                    break;
-+
-+                case (NET_HEADER_FIELD_IPv6_NEXT_HDR):
-+                case (NET_HEADER_FIELD_IPv6_HOP_LIMIT):
-+                    *parseCodeRealSize = 1;
-+                    break;
-+
-+                case (NET_HEADER_FIELD_IPv6_DST_IP):
-+                case (NET_HEADER_FIELD_IPv6_SRC_IP):
-+                    *parseCodeRealSize = 16;
-+                    break;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported5"));
-+                    *parseCodeRealSize = CC_SIZE_ILLEGAL;
-+                    break;
-+            }
-+            break;
-+
-+        case (HEADER_TYPE_IP):
-+            switch (field.ip)
-+            {
-+                case (NET_HEADER_FIELD_IP_DSCP):
-+                case (NET_HEADER_FIELD_IP_PROTO):
-+                    *parseCodeRealSize = 1;
-+                    break;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported5"));
-+                    *parseCodeRealSize = CC_SIZE_ILLEGAL;
-+                    break;
-+            }
-+            break;
-+
-+        case (HEADER_TYPE_GRE):
-+            switch (field.gre)
-+            {
-+                case (NET_HEADER_FIELD_GRE_TYPE):
-+                    *parseCodeRealSize = 2;
-+                    break;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported6"));
-+                    *parseCodeRealSize = CC_SIZE_ILLEGAL;
-+                    break;
-+            }
-+            break;
-+
-+        case (HEADER_TYPE_MINENCAP):
-+            switch (field.minencap)
-+            {
-+                case (NET_HEADER_FIELD_MINENCAP_TYPE):
-+                    *parseCodeRealSize = 1;
-+                    break;
-+
-+                case (NET_HEADER_FIELD_MINENCAP_DST_IP):
-+                case (NET_HEADER_FIELD_MINENCAP_SRC_IP):
-+                    *parseCodeRealSize = 4;
-+                    break;
-+
-+                case (NET_HEADER_FIELD_MINENCAP_SRC_IP
-+                        | NET_HEADER_FIELD_MINENCAP_DST_IP):
-+                    *parseCodeRealSize = 8;
-+                    break;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported7"));
-+                    *parseCodeRealSize = CC_SIZE_ILLEGAL;
-+                    break;
-+            }
-+            break;
-+
-+        case (HEADER_TYPE_TCP):
-+            switch (field.tcp)
-+            {
-+                case (NET_HEADER_FIELD_TCP_PORT_SRC):
-+                case (NET_HEADER_FIELD_TCP_PORT_DST):
-+                    *parseCodeRealSize = 2;
-+                    break;
-+
-+                case (NET_HEADER_FIELD_TCP_PORT_SRC
-+                        | NET_HEADER_FIELD_TCP_PORT_DST):
-+                    *parseCodeRealSize = 4;
-+                    break;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported8"));
-+                    *parseCodeRealSize = CC_SIZE_ILLEGAL;
-+                    break;
-+            }
-+            break;
-+
-+        case (HEADER_TYPE_UDP):
-+            switch (field.udp)
-+            {
-+                case (NET_HEADER_FIELD_UDP_PORT_SRC):
-+                case (NET_HEADER_FIELD_UDP_PORT_DST):
-+                    *parseCodeRealSize = 2;
-+                    break;
-+
-+                case (NET_HEADER_FIELD_UDP_PORT_SRC
-+                        | NET_HEADER_FIELD_UDP_PORT_DST):
-+                    *parseCodeRealSize = 4;
-+                    break;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported9"));
-+                    *parseCodeRealSize = CC_SIZE_ILLEGAL;
-+                    break;
-+            }
-+            break;
-+
-+        default:
-+            REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported10"));
-+            *parseCodeRealSize = CC_SIZE_ILLEGAL;
-+            break;
-+    }
-+}
-+
-+t_Error ValidateNextEngineParams(
-+        t_Handle h_FmPcd, t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams,
-+        e_FmPcdCcStatsMode statsMode)
-+{
-+    uint16_t absoluteProfileId;
-+    t_Error err = E_OK;
-+    uint8_t relativeSchemeId;
-+
-+    if ((statsMode == e_FM_PCD_CC_STATS_MODE_NONE)
-+            && (p_FmPcdCcNextEngineParams->statisticsEn))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_CONFLICT,
-+                ("Statistics are requested for a key, but statistics mode was set"
-+                "to 'NONE' upon initialization"));
-+
-+    switch (p_FmPcdCcNextEngineParams->nextEngine)
-+    {
-+        case (e_FM_PCD_INVALID):
-+            err = E_NOT_SUPPORTED;
-+            break;
-+
-+        case (e_FM_PCD_DONE):
-+            if ((p_FmPcdCcNextEngineParams->params.enqueueParams.action
-+                    == e_FM_PCD_ENQ_FRAME)
-+                    && p_FmPcdCcNextEngineParams->params.enqueueParams.overrideFqid)
-+            {
-+                if (!p_FmPcdCcNextEngineParams->params.enqueueParams.newFqid)
-+                    RETURN_ERROR(
-+                            MAJOR,
-+                            E_CONFLICT,
-+                            ("When overrideFqid is set, newFqid must not be zero"));
-+                if (p_FmPcdCcNextEngineParams->params.enqueueParams.newFqid
-+                        & ~0x00FFFFFF)
-+                    RETURN_ERROR(
-+                            MAJOR, E_INVALID_VALUE,
-+                            ("fqidForCtrlFlow must be between 1 and 2^24-1"));
-+            }
-+            break;
-+
-+        case (e_FM_PCD_KG):
-+            relativeSchemeId =
-+                    FmPcdKgGetRelativeSchemeId(
-+                            h_FmPcd,
-+                            FmPcdKgGetSchemeId(
-+                                    p_FmPcdCcNextEngineParams->params.kgParams.h_DirectScheme));
-+            if (relativeSchemeId == FM_PCD_KG_NUM_OF_SCHEMES)
-+                RETURN_ERROR(MAJOR, E_NOT_IN_RANGE, NO_MSG);
-+            if (!FmPcdKgIsSchemeValidSw(
-+                    p_FmPcdCcNextEngineParams->params.kgParams.h_DirectScheme))
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                             ("not valid schemeIndex in KG next engine param"));
-+            if (!KgIsSchemeAlwaysDirect(h_FmPcd, relativeSchemeId))
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_INVALID_STATE,
-+                        ("CC Node may point only to a scheme that is always direct."));
-+            break;
-+
-+        case (e_FM_PCD_PLCR):
-+            if (p_FmPcdCcNextEngineParams->params.plcrParams.overrideParams)
-+            {
-+                /* if private policer profile, it may be uninitialized yet, therefore no checks are done at this stage */
-+                if (p_FmPcdCcNextEngineParams->params.plcrParams.sharedProfile)
-+                {
-+                    err =
-+                            FmPcdPlcrGetAbsoluteIdByProfileParams(
-+                                    h_FmPcd,
-+                                    e_FM_PCD_PLCR_SHARED,
-+                                    NULL,
-+                                    p_FmPcdCcNextEngineParams->params.plcrParams.newRelativeProfileId,
-+                                    &absoluteProfileId);
-+                    if (err)
-+                        RETURN_ERROR(MAJOR, err,
-+                                     ("Shared profile offset is out of range"));
-+                    if (!FmPcdPlcrIsProfileValid(h_FmPcd, absoluteProfileId))
-+                        RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                                     ("Invalid profile"));
-+                }
-+            }
-+            break;
-+
-+        case (e_FM_PCD_HASH):
-+            p_FmPcdCcNextEngineParams->nextEngine = e_FM_PCD_CC;
-+        case (e_FM_PCD_CC):
-+            if (!p_FmPcdCcNextEngineParams->params.ccParams.h_CcNode)
-+                RETURN_ERROR(MAJOR, E_NULL_POINTER,
-+                             ("handler to next Node is NULL"));
-+            break;
-+
-+#if (DPAA_VERSION >= 11)
-+        case (e_FM_PCD_FR):
-+            if (!p_FmPcdCcNextEngineParams->params.frParams.h_FrmReplic)
-+                err = E_NOT_SUPPORTED;
-+            break;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+        default:
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                         ("Next engine is not correct"));
-+    }
-+
-+
-+    return err;
-+}
-+
-+static uint8_t GetGenParseCode(e_FmPcdExtractFrom src,
-+                               uint32_t offset, bool glblMask,
-+                               uint8_t *parseArrayOffset, bool fromIc,
-+                               ccPrivateInfo_t icCode)
-+{
-+    if (!fromIc)
-+    {
-+        switch (src)
-+        {
-+            case (e_FM_PCD_EXTRACT_FROM_FRAME_START):
-+                if (glblMask)
-+                    return CC_PC_GENERIC_WITH_MASK;
-+                else
-+                    return CC_PC_GENERIC_WITHOUT_MASK;
-+
-+            case (e_FM_PCD_EXTRACT_FROM_CURR_END_OF_PARSE):
-+                *parseArrayOffset = CC_PC_PR_NEXT_HEADER_OFFSET;
-+                if (offset)
-+                    return CC_PR_OFFSET;
-+                else
-+                    return CC_PR_WITHOUT_OFFSET;
-+
-+            default:
-+                REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal 'extract from' src"));
-+                return CC_PC_ILLEGAL;
-+        }
-+    }
-+    else
-+    {
-+        switch (icCode)
-+        {
-+            case (CC_PRIVATE_INFO_IC_KEY_EXACT_MATCH):
-+                *parseArrayOffset = 0x50;
-+                return CC_PC_GENERIC_IC_GMASK;
-+
-+            case (CC_PRIVATE_INFO_IC_HASH_EXACT_MATCH):
-+                *parseArrayOffset = 0x48;
-+                return CC_PC_GENERIC_IC_GMASK;
-+
-+            case (CC_PRIVATE_INFO_IC_HASH_INDEX_LOOKUP):
-+                *parseArrayOffset = 0x48;
-+                return CC_PC_GENERIC_IC_HASH_INDEXED;
-+
-+            case (CC_PRIVATE_INFO_IC_DEQ_FQID_INDEX_LOOKUP):
-+                *parseArrayOffset = 0x16;
-+                return CC_PC_GENERIC_IC_HASH_INDEXED;
-+
-+            default:
-+                REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal 'extract from' src"));
-+                break;
-+        }
-+    }
-+
-+    return CC_PC_ILLEGAL;
-+}
-+
-+static uint8_t GetFullFieldParseCode(e_NetHeaderType hdr, e_FmPcdHdrIndex index,
-+                                     t_FmPcdFields field)
-+{
-+    switch (hdr)
-+    {
-+        case (HEADER_TYPE_NONE):
-+            ASSERT_COND(FALSE);
-+            return CC_PC_ILLEGAL;
-+
-+        case (HEADER_TYPE_ETH):
-+            switch (field.eth)
-+            {
-+                case (NET_HEADER_FIELD_ETH_DA):
-+                    return CC_PC_FF_MACDST;
-+                case (NET_HEADER_FIELD_ETH_SA):
-+                    return CC_PC_FF_MACSRC;
-+                case (NET_HEADER_FIELD_ETH_TYPE):
-+                    return CC_PC_FF_ETYPE;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return CC_PC_ILLEGAL;
-+            }
-+
-+        case (HEADER_TYPE_VLAN):
-+            switch (field.vlan)
-+            {
-+                case (NET_HEADER_FIELD_VLAN_TCI):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE)
-+                            || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return CC_PC_FF_TCI1;
-+                    if (index == e_FM_PCD_HDR_INDEX_LAST)
-+                        return CC_PC_FF_TCI2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return CC_PC_ILLEGAL;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return CC_PC_ILLEGAL;
-+            }
-+
-+        case (HEADER_TYPE_MPLS):
-+            switch (field.mpls)
-+            {
-+                case (NET_HEADER_FIELD_MPLS_LABEL_STACK):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE)
-+                            || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return CC_PC_FF_MPLS1;
-+                    if (index == e_FM_PCD_HDR_INDEX_LAST)
-+                        return CC_PC_FF_MPLS_LAST;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal MPLS index"));
-+                    return CC_PC_ILLEGAL;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return CC_PC_ILLEGAL;
-+            }
-+
-+        case (HEADER_TYPE_IPv4):
-+            switch (field.ipv4)
-+            {
-+                case (NET_HEADER_FIELD_IPv4_DST_IP):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE)
-+                            || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return CC_PC_FF_IPV4DST1;
-+                    if (index == e_FM_PCD_HDR_INDEX_2)
-+                        return CC_PC_FF_IPV4DST2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv4 index"));
-+                    return CC_PC_ILLEGAL;
-+                case (NET_HEADER_FIELD_IPv4_TOS):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE)
-+                            || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return CC_PC_FF_IPV4IPTOS_TC1;
-+                    if (index == e_FM_PCD_HDR_INDEX_2)
-+                        return CC_PC_FF_IPV4IPTOS_TC2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv4 index"));
-+                    return CC_PC_ILLEGAL;
-+                case (NET_HEADER_FIELD_IPv4_PROTO):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE)
-+                            || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return CC_PC_FF_IPV4PTYPE1;
-+                    if (index == e_FM_PCD_HDR_INDEX_2)
-+                        return CC_PC_FF_IPV4PTYPE2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv4 index"));
-+                    return CC_PC_ILLEGAL;
-+                case (NET_HEADER_FIELD_IPv4_SRC_IP):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE)
-+                            || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return CC_PC_FF_IPV4SRC1;
-+                    if (index == e_FM_PCD_HDR_INDEX_2)
-+                        return CC_PC_FF_IPV4SRC2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv4 index"));
-+                    return CC_PC_ILLEGAL;
-+                case (NET_HEADER_FIELD_IPv4_SRC_IP
-+                        | NET_HEADER_FIELD_IPv4_DST_IP):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE)
-+                            || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return CC_PC_FF_IPV4SRC1_IPV4DST1;
-+                    if (index == e_FM_PCD_HDR_INDEX_2)
-+                        return CC_PC_FF_IPV4SRC2_IPV4DST2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv4 index"));
-+                    return CC_PC_ILLEGAL;
-+                case (NET_HEADER_FIELD_IPv4_TTL):
-+                    return CC_PC_FF_IPV4TTL;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return CC_PC_ILLEGAL;
-+            }
-+
-+        case (HEADER_TYPE_IPv6):
-+            switch (field.ipv6)
-+            {
-+                case (NET_HEADER_FIELD_IPv6_VER | NET_HEADER_FIELD_IPv6_FL
-+                        | NET_HEADER_FIELD_IPv6_TC):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE)
-+                            || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return CC_PC_FF_IPTOS_IPV6TC1_IPV6FLOW1;
-+                    if (index == e_FM_PCD_HDR_INDEX_2)
-+                        return CC_PC_FF_IPTOS_IPV6TC2_IPV6FLOW2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv6 index"));
-+                    return CC_PC_ILLEGAL;
-+
-+                case (NET_HEADER_FIELD_IPv6_NEXT_HDR):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE)
-+                            || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return CC_PC_FF_IPV6PTYPE1;
-+                    if (index == e_FM_PCD_HDR_INDEX_2)
-+                        return CC_PC_FF_IPV6PTYPE2;
-+                    if (index == e_FM_PCD_HDR_INDEX_LAST)
-+                        return CC_PC_FF_IPPID;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv6 index"));
-+                    return CC_PC_ILLEGAL;
-+
-+                case (NET_HEADER_FIELD_IPv6_DST_IP):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE)
-+                            || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return CC_PC_FF_IPV6DST1;
-+                    if (index == e_FM_PCD_HDR_INDEX_2)
-+                        return CC_PC_FF_IPV6DST2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv6 index"));
-+                    return CC_PC_ILLEGAL;
-+
-+                case (NET_HEADER_FIELD_IPv6_SRC_IP):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE)
-+                            || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return CC_PC_FF_IPV6SRC1;
-+                    if (index == e_FM_PCD_HDR_INDEX_2)
-+                        return CC_PC_FF_IPV6SRC2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv6 index"));
-+                    return CC_PC_ILLEGAL;
-+
-+                case (NET_HEADER_FIELD_IPv6_HOP_LIMIT):
-+                    return CC_PC_FF_IPV6HOP_LIMIT;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return CC_PC_ILLEGAL;
-+            }
-+
-+        case (HEADER_TYPE_IP):
-+            switch (field.ip)
-+            {
-+                case (NET_HEADER_FIELD_IP_DSCP):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE)
-+                            || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return CC_PC_FF_IPDSCP;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IP index"));
-+                    return CC_PC_ILLEGAL;
-+
-+                case (NET_HEADER_FIELD_IP_PROTO):
-+                    if (index == e_FM_PCD_HDR_INDEX_LAST)
-+                        return CC_PC_FF_IPPID;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IP index"));
-+                    return CC_PC_ILLEGAL;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return CC_PC_ILLEGAL;
-+            }
-+
-+        case (HEADER_TYPE_GRE):
-+            switch (field.gre)
-+            {
-+                case (NET_HEADER_FIELD_GRE_TYPE):
-+                    return CC_PC_FF_GREPTYPE;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return CC_PC_ILLEGAL;
-+            }
-+
-+        case (HEADER_TYPE_MINENCAP):
-+            switch (field.minencap)
-+            {
-+                case (NET_HEADER_FIELD_MINENCAP_TYPE):
-+                    return CC_PC_FF_MINENCAP_PTYPE;
-+
-+                case (NET_HEADER_FIELD_MINENCAP_DST_IP):
-+                    return CC_PC_FF_MINENCAP_IPDST;
-+
-+                case (NET_HEADER_FIELD_MINENCAP_SRC_IP):
-+                    return CC_PC_FF_MINENCAP_IPSRC;
-+
-+                case (NET_HEADER_FIELD_MINENCAP_SRC_IP
-+                        | NET_HEADER_FIELD_MINENCAP_DST_IP):
-+                    return CC_PC_FF_MINENCAP_IPSRC_IPDST;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return CC_PC_ILLEGAL;
-+            }
-+
-+        case (HEADER_TYPE_TCP):
-+            switch (field.tcp)
-+            {
-+                case (NET_HEADER_FIELD_TCP_PORT_SRC):
-+                    return CC_PC_FF_L4PSRC;
-+
-+                case (NET_HEADER_FIELD_TCP_PORT_DST):
-+                    return CC_PC_FF_L4PDST;
-+
-+                case (NET_HEADER_FIELD_TCP_PORT_DST
-+                        | NET_HEADER_FIELD_TCP_PORT_SRC):
-+                    return CC_PC_FF_L4PSRC_L4PDST;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return CC_PC_ILLEGAL;
-+            }
-+
-+        case (HEADER_TYPE_PPPoE):
-+            switch (field.pppoe)
-+            {
-+                case (NET_HEADER_FIELD_PPPoE_PID):
-+                    return CC_PC_FF_PPPPID;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return CC_PC_ILLEGAL;
-+            }
-+
-+        case (HEADER_TYPE_UDP):
-+            switch (field.udp)
-+            {
-+                case (NET_HEADER_FIELD_UDP_PORT_SRC):
-+                    return CC_PC_FF_L4PSRC;
-+
-+                case (NET_HEADER_FIELD_UDP_PORT_DST):
-+                    return CC_PC_FF_L4PDST;
-+
-+                case (NET_HEADER_FIELD_UDP_PORT_DST
-+                        | NET_HEADER_FIELD_UDP_PORT_SRC):
-+                    return CC_PC_FF_L4PSRC_L4PDST;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return CC_PC_ILLEGAL;
-+            }
-+
-+        default:
-+            REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+            return CC_PC_ILLEGAL;
-+    }
-+}
-+
-+static uint8_t GetPrParseCode(e_NetHeaderType hdr, e_FmPcdHdrIndex hdrIndex,
-+                              uint32_t offset, bool glblMask,
-+                              uint8_t *parseArrayOffset)
-+{
-+    bool offsetRelevant = FALSE;
-+
-+    if (offset)
-+        offsetRelevant = TRUE;
-+
-+    switch (hdr)
-+    {
-+        case (HEADER_TYPE_NONE):
-+            ASSERT_COND(FALSE);
-+            return CC_PC_ILLEGAL;
-+
-+        case (HEADER_TYPE_ETH):
-+            *parseArrayOffset = (uint8_t)CC_PC_PR_ETH_OFFSET;
-+            break;
-+
-+        case (HEADER_TYPE_USER_DEFINED_SHIM1):
-+            if (offset || glblMask)
-+                *parseArrayOffset = (uint8_t)CC_PC_PR_USER_DEFINED_SHIM1_OFFSET;
-+            else
-+                return CC_PC_PR_SHIM1;
-+            break;
-+
-+        case (HEADER_TYPE_USER_DEFINED_SHIM2):
-+            if (offset || glblMask)
-+                *parseArrayOffset = (uint8_t)CC_PC_PR_USER_DEFINED_SHIM2_OFFSET;
-+            else
-+                return CC_PC_PR_SHIM2;
-+            break;
-+
-+        case (HEADER_TYPE_LLC_SNAP):
-+            *parseArrayOffset = CC_PC_PR_USER_LLC_SNAP_OFFSET;
-+            break;
-+
-+        case (HEADER_TYPE_PPPoE):
-+            *parseArrayOffset = CC_PC_PR_PPPOE_OFFSET;
-+            break;
-+
-+        case (HEADER_TYPE_MPLS):
-+            if ((hdrIndex == e_FM_PCD_HDR_INDEX_NONE)
-+                    || (hdrIndex == e_FM_PCD_HDR_INDEX_1))
-+                *parseArrayOffset = CC_PC_PR_MPLS1_OFFSET;
-+            else
-+                if (hdrIndex == e_FM_PCD_HDR_INDEX_LAST)
-+                    *parseArrayOffset = CC_PC_PR_MPLS_LAST_OFFSET;
-+                else
-+                {
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal MPLS header index"));
-+                    return CC_PC_ILLEGAL;
-+                }
-+            break;
-+
-+        case (HEADER_TYPE_IPv4):
-+        case (HEADER_TYPE_IPv6):
-+            if ((hdrIndex == e_FM_PCD_HDR_INDEX_NONE)
-+                    || (hdrIndex == e_FM_PCD_HDR_INDEX_1))
-+                *parseArrayOffset = CC_PC_PR_IP1_OFFSET;
-+            else
-+                if (hdrIndex == e_FM_PCD_HDR_INDEX_2)
-+                    *parseArrayOffset = CC_PC_PR_IP_LAST_OFFSET;
-+                else
-+                {
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IP header index"));
-+                    return CC_PC_ILLEGAL;
-+                }
-+            break;
-+
-+        case (HEADER_TYPE_MINENCAP):
-+            *parseArrayOffset = CC_PC_PR_MINENC_OFFSET;
-+            break;
-+
-+        case (HEADER_TYPE_GRE):
-+            *parseArrayOffset = CC_PC_PR_GRE_OFFSET;
-+            break;
-+
-+        case (HEADER_TYPE_TCP):
-+        case (HEADER_TYPE_UDP):
-+        case (HEADER_TYPE_IPSEC_AH):
-+        case (HEADER_TYPE_IPSEC_ESP):
-+        case (HEADER_TYPE_DCCP):
-+        case (HEADER_TYPE_SCTP):
-+            *parseArrayOffset = CC_PC_PR_L4_OFFSET;
-+            break;
-+
-+        default:
-+            REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IP header for this type of operation"));
-+            return CC_PC_ILLEGAL;
-+    }
-+
-+    if (offsetRelevant)
-+        return CC_PR_OFFSET;
-+    else
-+        return CC_PR_WITHOUT_OFFSET;
-+}
-+
-+static uint8_t GetFieldParseCode(e_NetHeaderType hdr, t_FmPcdFields field,
-+                                 uint32_t offset, uint8_t *parseArrayOffset,
-+                                 e_FmPcdHdrIndex hdrIndex)
-+{
-+    bool offsetRelevant = FALSE;
-+
-+    if (offset)
-+        offsetRelevant = TRUE;
-+
-+    switch (hdr)
-+    {
-+        case (HEADER_TYPE_NONE):
-+            ASSERT_COND(FALSE);
-+                break;
-+        case (HEADER_TYPE_ETH):
-+            switch (field.eth)
-+            {
-+                case (NET_HEADER_FIELD_ETH_TYPE):
-+                    *parseArrayOffset = CC_PC_PR_ETYPE_LAST_OFFSET;
-+                    break;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return CC_PC_ILLEGAL;
-+            }
-+            break;
-+
-+        case (HEADER_TYPE_VLAN):
-+            switch (field.vlan)
-+            {
-+                case (NET_HEADER_FIELD_VLAN_TCI):
-+                    if ((hdrIndex == e_FM_PCD_HDR_INDEX_NONE)
-+                            || (hdrIndex == e_FM_PCD_HDR_INDEX_1))
-+                        *parseArrayOffset = CC_PC_PR_VLAN1_OFFSET;
-+                    else
-+                        if (hdrIndex == e_FM_PCD_HDR_INDEX_LAST)
-+                            *parseArrayOffset = CC_PC_PR_VLAN2_OFFSET;
-+                    break;
-+
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return CC_PC_ILLEGAL;
-+            }
-+            break;
-+
-+        default:
-+            REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal header "));
-+            return CC_PC_ILLEGAL;
-+    }
-+
-+    if (offsetRelevant)
-+        return CC_PR_OFFSET;
-+    else
-+        return CC_PR_WITHOUT_OFFSET;
-+}
-+
-+static void FillAdOfTypeResult(t_Handle h_Ad,
-+                               t_FmPcdCcStatsParams *p_FmPcdCcStatsParams,
-+                               t_FmPcd *p_FmPcd,
-+                               t_FmPcdCcNextEngineParams *p_CcNextEngineParams)
-+{
-+    t_AdOfTypeResult *p_AdResult = (t_AdOfTypeResult *)h_Ad;
-+    t_Handle h_TmpAd;
-+    uint32_t tmp = 0, tmpNia = 0;
-+    uint16_t profileId;
-+    t_Handle p_AdNewPtr = NULL;
-+    t_Error err = E_OK;
-+
-+    /* There are 3 cases handled in this routine of building a "result" type AD.
-+     * Case 1: No Manip. The action descriptor is built within the match table.
-+     * Case 2: Manip exists. A new AD is created - p_AdNewPtr. It is initialized
-+     *         either in the FmPcdManipUpdateAdResultForCc routine or it was already
-+     *         initialized and returned here.
-+     *         p_AdResult (within the match table) will be initialized after
-+     *         this routine returns and point to the existing AD.
-+     * Case 3: Manip exists. The action descriptor is built within the match table.
-+     *         FmPcdManipUpdateAdResultForCc returns a NULL p_AdNewPtr.
-+     *
-+     * If statistics were enabled and the statistics mode of this node requires
-+     * a statistics Ad, it will be placed after the result Ad and before the
-+     * manip Ad, if manip Ad exists here.
-+     */
-+
-+    /* As default, the "new" ptr is the current one. i.e. the content of the result
-+     * AD will be written into the match table itself (case (1))*/
-+    p_AdNewPtr = p_AdResult;
-+
-+    /* Initialize an action descriptor, if current statistics mode requires an Ad */
-+    if (p_FmPcdCcStatsParams)
-+    {
-+        ASSERT_COND(p_FmPcdCcStatsParams->h_StatsAd);
-+        ASSERT_COND(p_FmPcdCcStatsParams->h_StatsCounters);
-+
-+        /* Swapping addresses between statistics Ad and the current lookup AD addresses */
-+        h_TmpAd = p_FmPcdCcStatsParams->h_StatsAd;
-+        p_FmPcdCcStatsParams->h_StatsAd = h_Ad;
-+        h_Ad = h_TmpAd;
-+
-+        p_AdNewPtr = h_Ad;
-+        p_AdResult = h_Ad;
-+
-+        /* Init statistics Ad and connect current lookup AD as 'next action' from statistics Ad */
-+        UpdateStatsAd(p_FmPcdCcStatsParams, h_Ad, p_FmPcd->physicalMuramBase);
-+    }
-+
-+    /* Create manip and return p_AdNewPtr to either a new descriptor or NULL */
-+    if (p_CcNextEngineParams->h_Manip)
-+        FmPcdManipUpdateAdResultForCc(p_CcNextEngineParams->h_Manip,
-+                                      p_CcNextEngineParams, h_Ad, &p_AdNewPtr);
-+
-+    /* if (p_AdNewPtr = NULL) --> Done. (case (3)) */
-+    if (p_AdNewPtr)
-+    {
-+        /* case (1) and (2) */
-+        switch (p_CcNextEngineParams->nextEngine)
-+        {
-+            case (e_FM_PCD_DONE):
-+                if (p_CcNextEngineParams->params.enqueueParams.action
-+                        == e_FM_PCD_ENQ_FRAME)
-+                {
-+                    if (p_CcNextEngineParams->params.enqueueParams.overrideFqid)
-+                    {
-+                        tmp = FM_PCD_AD_RESULT_CONTRL_FLOW_TYPE;
-+                        tmp |=
-+                                p_CcNextEngineParams->params.enqueueParams.newFqid;
-+#if (DPAA_VERSION >= 11)
-+                        tmp |=
-+                                (p_CcNextEngineParams->params.enqueueParams.newRelativeStorageProfileId
-+                                        & FM_PCD_AD_RESULT_VSP_MASK)
-+                                        << FM_PCD_AD_RESULT_VSP_SHIFT;
-+#endif /* (DPAA_VERSION >= 11) */
-+                    }
-+                    else
-+                    {
-+                        tmp = FM_PCD_AD_RESULT_DATA_FLOW_TYPE;
-+                        tmp |= FM_PCD_AD_RESULT_PLCR_DIS;
-+                    }
-+                }
-+
-+                if (p_CcNextEngineParams->params.enqueueParams.action
-+                        == e_FM_PCD_DROP_FRAME)
-+                    tmpNia |= GET_NIA_BMI_AC_DISCARD_FRAME(p_FmPcd);
-+                else
-+                    tmpNia |= GET_NIA_BMI_AC_ENQ_FRAME(p_FmPcd);
-+                break;
-+
-+            case (e_FM_PCD_KG):
-+                if (p_CcNextEngineParams->params.kgParams.overrideFqid)
-+                {
-+                    tmp = FM_PCD_AD_RESULT_CONTRL_FLOW_TYPE;
-+                    tmp |= p_CcNextEngineParams->params.kgParams.newFqid;
-+#if (DPAA_VERSION >= 11)
-+                    tmp |=
-+                            (p_CcNextEngineParams->params.kgParams.newRelativeStorageProfileId
-+                                    & FM_PCD_AD_RESULT_VSP_MASK)
-+                                    << FM_PCD_AD_RESULT_VSP_SHIFT;
-+#endif /* (DPAA_VERSION >= 11) */
-+                }
-+                else
-+                {
-+                    tmp = FM_PCD_AD_RESULT_DATA_FLOW_TYPE;
-+                    tmp |= FM_PCD_AD_RESULT_PLCR_DIS;
-+                }
-+                tmpNia = NIA_KG_DIRECT;
-+                tmpNia |= NIA_ENG_KG;
-+                tmpNia |= NIA_KG_CC_EN;
-+                tmpNia |= FmPcdKgGetSchemeId(
-+                        p_CcNextEngineParams->params.kgParams.h_DirectScheme);
-+                break;
-+
-+            case (e_FM_PCD_PLCR):
-+                if (p_CcNextEngineParams->params.plcrParams.overrideParams)
-+                {
-+                    tmp = FM_PCD_AD_RESULT_CONTRL_FLOW_TYPE;
-+
-+                    /* if private policer profile, it may be uninitialized yet, therefore no checks are done at this stage */
-+                    if (p_CcNextEngineParams->params.plcrParams.sharedProfile)
-+                    {
-+                        tmpNia |= NIA_PLCR_ABSOLUTE;
-+                        err = FmPcdPlcrGetAbsoluteIdByProfileParams(
-+                                (t_Handle)p_FmPcd,
-+                                e_FM_PCD_PLCR_SHARED,
-+                                NULL,
-+                                p_CcNextEngineParams->params.plcrParams.newRelativeProfileId,
-+                                &profileId);
-+
-+						if (err != E_OK) {
-+							REPORT_ERROR(MAJOR, err, NO_MSG);
-+							return;
-+						}
-+
-+                    }
-+                    else
-+                        profileId =
-+                                p_CcNextEngineParams->params.plcrParams.newRelativeProfileId;
-+
-+                    tmp |= p_CcNextEngineParams->params.plcrParams.newFqid;
-+#if (DPAA_VERSION >= 11)
-+                    tmp |=
-+                            (p_CcNextEngineParams->params.plcrParams.newRelativeStorageProfileId
-+                                    & FM_PCD_AD_RESULT_VSP_MASK)
-+                                    << FM_PCD_AD_RESULT_VSP_SHIFT;
-+#endif /* (DPAA_VERSION >= 11) */
-+                    WRITE_UINT32(
-+                            p_AdResult->plcrProfile,
-+                            (uint32_t)((uint32_t)profileId << FM_PCD_AD_PROFILEID_FOR_CNTRL_SHIFT));
-+                }
-+                else
-+                    tmp = FM_PCD_AD_RESULT_DATA_FLOW_TYPE;
-+
-+                tmpNia |=
-+                        NIA_ENG_PLCR
-+                                | p_CcNextEngineParams->params.plcrParams.newRelativeProfileId;
-+                break;
-+
-+            default:
-+                return;
-+        }WRITE_UINT32(p_AdResult->fqid, tmp);
-+
-+        if (p_CcNextEngineParams->h_Manip)
-+        {
-+            tmp = GET_UINT32(p_AdResult->plcrProfile);
-+            tmp |= (uint32_t)(XX_VirtToPhys(p_AdNewPtr)
-+                    - (p_FmPcd->physicalMuramBase)) >> 4;
-+            WRITE_UINT32(p_AdResult->plcrProfile, tmp);
-+
-+            tmpNia |= FM_PCD_AD_RESULT_EXTENDED_MODE;
-+            tmpNia |= FM_PCD_AD_RESULT_NADEN;
-+        }
-+
-+#if (DPAA_VERSION >= 11)
-+        tmpNia |= FM_PCD_AD_RESULT_NO_OM_VSPE;
-+#endif /* (DPAA_VERSION >= 11) */
-+        WRITE_UINT32(p_AdResult->nia, tmpNia);
-+    }
-+}
-+
-+static t_Error CcUpdateParams(t_Handle h_FmPcd, t_Handle h_PcdParams,
-+                              t_Handle h_FmPort, t_Handle h_FmTree,
-+                              bool validate)
-+{
-+    t_FmPcdCcTree *p_CcTree = (t_FmPcdCcTree *)h_FmTree;
-+
-+    return CcUpdateParam(h_FmPcd, h_PcdParams, h_FmPort,
-+                         p_CcTree->keyAndNextEngineParams,
-+                         p_CcTree->numOfEntries,
-+                         UINT_TO_PTR(p_CcTree->ccTreeBaseAddr), validate, 0,
-+                         h_FmTree, FALSE);
-+}
-+
-+
-+static void ReleaseNewNodeCommonPart(
-+        t_FmPcdModifyCcKeyAdditionalParams *p_AdditionalInfo)
-+{
-+    if (p_AdditionalInfo->p_AdTableNew)
-+        FM_MURAM_FreeMem(
-+                FmPcdGetMuramHandle(
-+                        ((t_FmPcdCcNode *)(p_AdditionalInfo->h_CurrentNode))->h_FmPcd),
-+                p_AdditionalInfo->p_AdTableNew);
-+
-+    if (p_AdditionalInfo->p_KeysMatchTableNew)
-+        FM_MURAM_FreeMem(
-+                FmPcdGetMuramHandle(
-+                        ((t_FmPcdCcNode *)(p_AdditionalInfo->h_CurrentNode))->h_FmPcd),
-+                p_AdditionalInfo->p_KeysMatchTableNew);
-+}
-+
-+static t_Error UpdateGblMask(t_FmPcdCcNode *p_CcNode, uint8_t keySize,
-+                             uint8_t *p_Mask)
-+{
-+    uint8_t prvGlblMaskSize = p_CcNode->glblMaskSize;
-+
-+    if (p_Mask && !p_CcNode->glblMaskUpdated && (keySize <= 4)
-+            && !p_CcNode->lclMask)
-+    {
-+        if (p_CcNode->parseCode && (p_CcNode->parseCode != CC_PC_FF_TCI1)
-+                && (p_CcNode->parseCode != CC_PC_FF_TCI2)
-+                && (p_CcNode->parseCode != CC_PC_FF_MPLS1)
-+                && (p_CcNode->parseCode != CC_PC_FF_MPLS_LAST)
-+                && (p_CcNode->parseCode != CC_PC_FF_IPV4IPTOS_TC1)
-+                && (p_CcNode->parseCode != CC_PC_FF_IPV4IPTOS_TC2)
-+                && (p_CcNode->parseCode != CC_PC_FF_IPTOS_IPV6TC1_IPV6FLOW1)
-+                && (p_CcNode->parseCode != CC_PC_FF_IPDSCP)
-+                && (p_CcNode->parseCode != CC_PC_FF_IPTOS_IPV6TC2_IPV6FLOW2))
-+        {
-+            p_CcNode->glblMaskSize = 0;
-+            p_CcNode->lclMask = TRUE;
-+        }
-+        else
-+        {
-+            memcpy(p_CcNode->p_GlblMask, p_Mask, (sizeof(uint8_t)) * keySize);
-+            p_CcNode->glblMaskUpdated = TRUE;
-+            p_CcNode->glblMaskSize = 4;
-+        }
-+    }
-+    else
-+        if (p_Mask && (keySize <= 4) && !p_CcNode->lclMask)
-+        {
-+            if (memcmp(p_CcNode->p_GlblMask, p_Mask, keySize) != 0)
-+            {
-+                p_CcNode->lclMask = TRUE;
-+                p_CcNode->glblMaskSize = 0;
-+            }
-+        }
-+        else
-+            if (!p_Mask && p_CcNode->glblMaskUpdated && (keySize <= 4))
-+            {
-+                uint32_t tmpMask = 0xffffffff;
-+                if (memcmp(p_CcNode->p_GlblMask, &tmpMask, 4) != 0)
-+                {
-+                    p_CcNode->lclMask = TRUE;
-+                    p_CcNode->glblMaskSize = 0;
-+                }
-+            }
-+            else
-+                if (p_Mask)
-+                {
-+                    p_CcNode->lclMask = TRUE;
-+                    p_CcNode->glblMaskSize = 0;
-+                }
-+
-+    /* In static mode (maxNumOfKeys > 0), local mask is supported
-+     only is mask support was enabled at initialization */
-+    if (p_CcNode->maxNumOfKeys && (!p_CcNode->maskSupport) && p_CcNode->lclMask)
-+    {
-+        p_CcNode->lclMask = FALSE;
-+        p_CcNode->glblMaskSize = prvGlblMaskSize;
-+        return ERROR_CODE(E_NOT_SUPPORTED);
-+    }
-+
-+    return E_OK;
-+}
-+
-+static __inline__ t_Handle GetNewAd(t_Handle h_FmPcdCcNodeOrTree, bool isTree)
-+{
-+    t_FmPcd *p_FmPcd;
-+    t_Handle h_Ad;
-+
-+    if (isTree)
-+        p_FmPcd = (t_FmPcd *)(((t_FmPcdCcTree *)h_FmPcdCcNodeOrTree)->h_FmPcd);
-+    else
-+        p_FmPcd = (t_FmPcd *)(((t_FmPcdCcNode *)h_FmPcdCcNodeOrTree)->h_FmPcd);
-+
-+    if ((isTree && p_FmPcd->p_CcShadow)
-+            || (!isTree && ((t_FmPcdCcNode *)h_FmPcdCcNodeOrTree)->maxNumOfKeys))
-+    {
-+        /* The allocated shadow is divided as follows:
-+         0 . . .       16 . . .
-+         ---------------------------------------------------
-+         |   Shadow   |   Shadow Keys   |   Shadow Next    |
-+         |     Ad     |   Match Table   |   Engine Table   |
-+         | (16 bytes) | (maximal size)  |  (maximal size)  |
-+         ---------------------------------------------------
-+         */
-+        if (!p_FmPcd->p_CcShadow)
-+        {
-+            REPORT_ERROR(MAJOR, E_NO_MEMORY, ("CC Shadow not allocated"));
-+            return NULL;
-+        }
-+
-+        h_Ad = p_FmPcd->p_CcShadow;
-+    }
-+    else
-+    {
-+        h_Ad = (t_Handle)FM_MURAM_AllocMem(FmPcdGetMuramHandle(p_FmPcd),
-+                                           FM_PCD_CC_AD_ENTRY_SIZE,
-+                                           FM_PCD_CC_AD_TABLE_ALIGN);
-+        if (!h_Ad)
-+        {
-+            REPORT_ERROR(MAJOR, E_NO_MEMORY, ("MURAM allocation for CC node action descriptor"));
-+            return NULL;
-+        }
-+    }
-+
-+    return h_Ad;
-+}
-+
-+static t_Error BuildNewNodeCommonPart(
-+        t_FmPcdCcNode *p_CcNode, int *size,
-+        t_FmPcdModifyCcKeyAdditionalParams *p_AdditionalInfo)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+
-+    if (p_CcNode->lclMask)
-+        *size = 2 * p_CcNode->ccKeySizeAccExtraction;
-+    else
-+        *size = p_CcNode->ccKeySizeAccExtraction;
-+
-+    if (p_CcNode->maxNumOfKeys == 0)
-+    {
-+        p_AdditionalInfo->p_AdTableNew = (t_Handle)FM_MURAM_AllocMem(
-+                FmPcdGetMuramHandle(p_FmPcd),
-+                (uint32_t)((p_AdditionalInfo->numOfKeys + 1)
-+                        * FM_PCD_CC_AD_ENTRY_SIZE),
-+                FM_PCD_CC_AD_TABLE_ALIGN);
-+        if (!p_AdditionalInfo->p_AdTableNew)
-+            RETURN_ERROR(
-+                    MAJOR, E_NO_MEMORY,
-+                    ("MURAM allocation for CC node action descriptors table"));
-+
-+        p_AdditionalInfo->p_KeysMatchTableNew = (t_Handle)FM_MURAM_AllocMem(
-+                FmPcdGetMuramHandle(p_FmPcd),
-+                (uint32_t)(*size * sizeof(uint8_t)
-+                        * (p_AdditionalInfo->numOfKeys + 1)),
-+                FM_PCD_CC_KEYS_MATCH_TABLE_ALIGN);
-+        if (!p_AdditionalInfo->p_KeysMatchTableNew)
-+        {
-+            FM_MURAM_FreeMem(FmPcdGetMuramHandle(p_CcNode->h_FmPcd),
-+                             p_AdditionalInfo->p_AdTableNew);
-+            p_AdditionalInfo->p_AdTableNew = NULL;
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                         ("MURAM allocation for CC node key match table"));
-+        }
-+
-+        MemSet8(
-+                (uint8_t*)p_AdditionalInfo->p_AdTableNew,
-+                0,
-+                (uint32_t)((p_AdditionalInfo->numOfKeys + 1)
-+                        * FM_PCD_CC_AD_ENTRY_SIZE));
-+        MemSet8((uint8_t*)p_AdditionalInfo->p_KeysMatchTableNew, 0,
-+                   *size * sizeof(uint8_t) * (p_AdditionalInfo->numOfKeys + 1));
-+    }
-+    else
-+    {
-+        /* The allocated shadow is divided as follows:
-+         0 . . .       16 . . .
-+         ---------------------------------------------------
-+         |   Shadow   |   Shadow Keys   |   Shadow Next    |
-+         |     Ad     |   Match Table   |   Engine Table   |
-+         | (16 bytes) | (maximal size)  |  (maximal size)  |
-+         ---------------------------------------------------
-+         */
-+
-+        if (!p_FmPcd->p_CcShadow)
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, ("CC Shadow not allocated"));
-+
-+        p_AdditionalInfo->p_KeysMatchTableNew =
-+                PTR_MOVE(p_FmPcd->p_CcShadow, FM_PCD_CC_AD_ENTRY_SIZE);
-+        p_AdditionalInfo->p_AdTableNew =
-+                PTR_MOVE(p_AdditionalInfo->p_KeysMatchTableNew, p_CcNode->keysMatchTableMaxSize);
-+
-+        MemSet8(
-+                (uint8_t*)p_AdditionalInfo->p_AdTableNew,
-+                0,
-+                (uint32_t)((p_CcNode->maxNumOfKeys + 1)
-+                        * FM_PCD_CC_AD_ENTRY_SIZE));
-+        MemSet8((uint8_t*)p_AdditionalInfo->p_KeysMatchTableNew, 0,
-+                   (*size) * sizeof(uint8_t) * (p_CcNode->maxNumOfKeys));
-+    }
-+
-+    p_AdditionalInfo->p_AdTableOld = p_CcNode->h_AdTable;
-+    p_AdditionalInfo->p_KeysMatchTableOld = p_CcNode->h_KeysMatchTable;
-+
-+    return E_OK;
-+}
-+
-+static t_Error BuildNewNodeAddOrMdfyKeyAndNextEngine(
-+        t_Handle h_FmPcd, t_FmPcdCcNode *p_CcNode, uint16_t keyIndex,
-+        t_FmPcdCcKeyParams *p_KeyParams,
-+        t_FmPcdModifyCcKeyAdditionalParams *p_AdditionalInfo, bool add)
-+{
-+    t_Error err = E_OK;
-+    t_Handle p_AdTableNewTmp, p_KeysMatchTableNewTmp;
-+    t_Handle p_KeysMatchTableOldTmp, p_AdTableOldTmp;
-+    int size;
-+    int i = 0, j = 0;
-+    t_FmPcd *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint32_t requiredAction = 0;
-+    bool prvLclMask;
-+    t_CcNodeInformation *p_CcNodeInformation;
-+    t_FmPcdCcStatsParams statsParams = { 0 };
-+    t_List *p_Pos;
-+    t_FmPcdStatsObj *p_StatsObj;
-+
-+    /* Check that new NIA is legal */
-+    err = ValidateNextEngineParams(h_FmPcd, &p_KeyParams->ccNextEngineParams,
-+                                   p_CcNode->statisticsMode);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    prvLclMask = p_CcNode->lclMask;
-+
-+    /* Check that new key is not require update of localMask */
-+    err = UpdateGblMask(p_CcNode, p_CcNode->ccKeySizeAccExtraction,
-+                        p_KeyParams->p_Mask);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, (NO_MSG));
-+
-+    /* Update internal data structure with new next engine for the given index */
-+    memcpy(&p_AdditionalInfo->keyAndNextEngineParams[keyIndex].nextEngineParams,
-+           &p_KeyParams->ccNextEngineParams, sizeof(t_FmPcdCcNextEngineParams));
-+
-+    memcpy(p_AdditionalInfo->keyAndNextEngineParams[keyIndex].key,
-+           p_KeyParams->p_Key, p_CcNode->userSizeOfExtraction);
-+
-+    if ((p_AdditionalInfo->keyAndNextEngineParams[keyIndex].nextEngineParams.nextEngine
-+            == e_FM_PCD_CC)
-+            && p_AdditionalInfo->keyAndNextEngineParams[keyIndex].nextEngineParams.h_Manip)
-+    {
-+        err =
-+                AllocAndFillAdForContLookupManip(
-+                        p_AdditionalInfo->keyAndNextEngineParams[keyIndex].nextEngineParams.params.ccParams.h_CcNode);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, (NO_MSG));
-+    }
-+
-+    if (p_KeyParams->p_Mask)
-+        memcpy(p_AdditionalInfo->keyAndNextEngineParams[keyIndex].mask,
-+               p_KeyParams->p_Mask, p_CcNode->userSizeOfExtraction);
-+    else
-+        memset(p_AdditionalInfo->keyAndNextEngineParams[keyIndex].mask, 0xFF,
-+               p_CcNode->userSizeOfExtraction);
-+
-+    /* Update numOfKeys */
-+    if (add)
-+        p_AdditionalInfo->numOfKeys = (uint8_t)(p_CcNode->numOfKeys + 1);
-+    else
-+        p_AdditionalInfo->numOfKeys = (uint8_t)p_CcNode->numOfKeys;
-+
-+    /* Allocate new tables in MURAM: keys match table and action descriptors table */
-+    err = BuildNewNodeCommonPart(p_CcNode, &size, p_AdditionalInfo);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    /* Check that manip is legal and what requiredAction is necessary for this manip */
-+    if (p_KeyParams->ccNextEngineParams.h_Manip)
-+    {
-+        err = FmPcdManipCheckParamsForCcNextEngine(
-+                &p_KeyParams->ccNextEngineParams, &requiredAction);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, (NO_MSG));
-+    }
-+
-+    p_AdditionalInfo->keyAndNextEngineParams[keyIndex].requiredAction =
-+            requiredAction;
-+    p_AdditionalInfo->keyAndNextEngineParams[keyIndex].requiredAction |=
-+            UPDATE_CC_WITH_TREE;
-+
-+    /* Update new Ad and new Key Table according to new requirement */
-+    i = 0;
-+    for (j = 0; j < p_AdditionalInfo->numOfKeys; j++)
-+    {
-+        p_AdTableNewTmp =
-+                PTR_MOVE(p_AdditionalInfo->p_AdTableNew, j*FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+        if (j == keyIndex)
-+        {
-+            if (p_KeyParams->ccNextEngineParams.statisticsEn)
-+            {
-+                /* Allocate a statistics object that holds statistics AD and counters.
-+                 - For added key - New statistics AD and counters pointer need to be allocated
-+                 new statistics object. If statistics were enabled, we need to replace the
-+                 existing descriptor with a new descriptor with nullified counters.
-+                 */
-+                p_StatsObj = GetStatsObj(p_CcNode);
-+                ASSERT_COND(p_StatsObj);
-+
-+                /* Store allocated statistics object */
-+                ASSERT_COND(keyIndex < CC_MAX_NUM_OF_KEYS);
-+                p_AdditionalInfo->keyAndNextEngineParams[keyIndex].p_StatsObj =
-+                        p_StatsObj;
-+
-+                statsParams.h_StatsAd = p_StatsObj->h_StatsAd;
-+                statsParams.h_StatsCounters = p_StatsObj->h_StatsCounters;
-+#if (DPAA_VERSION >= 11)
-+                statsParams.h_StatsFLRs = p_CcNode->h_StatsFLRs;
-+
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+                /* Building action descriptor for the received new key */
-+                NextStepAd(p_AdTableNewTmp, &statsParams,
-+                           &p_KeyParams->ccNextEngineParams, p_FmPcd);
-+            }
-+            else
-+            {
-+                /* Building action descriptor for the received new key */
-+                NextStepAd(p_AdTableNewTmp, NULL,
-+                           &p_KeyParams->ccNextEngineParams, p_FmPcd);
-+            }
-+
-+            /* Copy the received new key into keys match table */
-+            p_KeysMatchTableNewTmp =
-+                    PTR_MOVE(p_AdditionalInfo->p_KeysMatchTableNew, j*size*sizeof(uint8_t));
-+
-+            MemCpy8((void*)p_KeysMatchTableNewTmp, p_KeyParams->p_Key,
-+                        p_CcNode->userSizeOfExtraction);
-+
-+            /* Update mask for the received new key */
-+            if (p_CcNode->lclMask)
-+            {
-+                if (p_KeyParams->p_Mask)
-+                {
-+                    MemCpy8(PTR_MOVE(p_KeysMatchTableNewTmp,
-+                            p_CcNode->ccKeySizeAccExtraction),
-+                                p_KeyParams->p_Mask,
-+                                p_CcNode->userSizeOfExtraction);
-+                }
-+                else
-+                    if (p_CcNode->ccKeySizeAccExtraction > 4)
-+                    {
-+                        MemSet8(PTR_MOVE(p_KeysMatchTableNewTmp,
-+                                p_CcNode->ccKeySizeAccExtraction),
-+                                   0xff, p_CcNode->userSizeOfExtraction);
-+                    }
-+                    else
-+                    {
-+                        MemCpy8(PTR_MOVE(p_KeysMatchTableNewTmp,
-+                                p_CcNode->ccKeySizeAccExtraction),
-+                                    p_CcNode->p_GlblMask,
-+                                    p_CcNode->userSizeOfExtraction);
-+                    }
-+            }
-+
-+            /* If key modification requested, the old entry is omitted and replaced by the new parameters */
-+            if (!add)
-+                i++;
-+        }
-+        else
-+        {
-+            /* Copy existing action descriptors to the newly allocated Ad table */
-+            p_AdTableOldTmp =
-+                    PTR_MOVE(p_AdditionalInfo->p_AdTableOld, i*FM_PCD_CC_AD_ENTRY_SIZE);
-+            MemCpy8(p_AdTableNewTmp, p_AdTableOldTmp,
-+                       FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+            /* Copy existing keys and their masks to the newly allocated keys match table */
-+            p_KeysMatchTableNewTmp =
-+                    PTR_MOVE(p_AdditionalInfo->p_KeysMatchTableNew, j * size * sizeof(uint8_t));
-+            p_KeysMatchTableOldTmp =
-+                    PTR_MOVE(p_AdditionalInfo->p_KeysMatchTableOld, i * size * sizeof(uint8_t));
-+
-+            if (p_CcNode->lclMask)
-+            {
-+                if (prvLclMask)
-+                {
-+                    MemCpy8(
-+                            PTR_MOVE(p_KeysMatchTableNewTmp, p_CcNode->ccKeySizeAccExtraction),
-+                            PTR_MOVE(p_KeysMatchTableOldTmp, p_CcNode->ccKeySizeAccExtraction),
-+                            p_CcNode->ccKeySizeAccExtraction);
-+                }
-+                else
-+                {
-+                    p_KeysMatchTableOldTmp =
-+                            PTR_MOVE(p_CcNode->h_KeysMatchTable,
-+                                    i * (int)p_CcNode->ccKeySizeAccExtraction * sizeof(uint8_t));
-+
-+                    if (p_CcNode->ccKeySizeAccExtraction > 4)
-+                    {
-+                        MemSet8(PTR_MOVE(p_KeysMatchTableNewTmp,
-+                                p_CcNode->ccKeySizeAccExtraction),
-+                                   0xff, p_CcNode->userSizeOfExtraction);
-+                    }
-+                    else
-+                    {
-+                        MemCpy8(PTR_MOVE(p_KeysMatchTableNewTmp,
-+                                p_CcNode->ccKeySizeAccExtraction),
-+                                   p_CcNode->p_GlblMask,
-+                                   p_CcNode->userSizeOfExtraction);
-+                    }
-+                }
-+            }
-+
-+            MemCpy8(p_KeysMatchTableNewTmp, p_KeysMatchTableOldTmp,
-+                       p_CcNode->ccKeySizeAccExtraction);
-+
-+            i++;
-+        }
-+    }
-+
-+    /* Miss action descriptor */
-+    p_AdTableNewTmp =
-+            PTR_MOVE(p_AdditionalInfo->p_AdTableNew, j * FM_PCD_CC_AD_ENTRY_SIZE);
-+    p_AdTableOldTmp =
-+            PTR_MOVE(p_AdditionalInfo->p_AdTableOld, i * FM_PCD_CC_AD_ENTRY_SIZE);
-+    MemCpy8(p_AdTableNewTmp, p_AdTableOldTmp, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    if (!LIST_IsEmpty(&p_CcNode->ccTreesLst))
-+    {
-+        LIST_FOR_EACH(p_Pos, &p_CcNode->ccTreesLst)
-+        {
-+            p_CcNodeInformation = CC_NODE_F_OBJECT(p_Pos);
-+            ASSERT_COND(p_CcNodeInformation->h_CcNode);
-+            /* Update the manipulation which has to be updated from parameters of the port */
-+            /* It's has to be updated with restrictions defined in the function */
-+            err =
-+                    SetRequiredAction(
-+                            p_CcNode->h_FmPcd,
-+                            p_CcNode->shadowAction
-+                                    | p_AdditionalInfo->keyAndNextEngineParams[keyIndex].requiredAction,
-+                            &p_AdditionalInfo->keyAndNextEngineParams[keyIndex],
-+                            PTR_MOVE(p_AdditionalInfo->p_AdTableNew, keyIndex*FM_PCD_CC_AD_ENTRY_SIZE),
-+                            1, p_CcNodeInformation->h_CcNode);
-+            if (err)
-+                RETURN_ERROR(MAJOR, err, (NO_MSG));
-+
-+            err =
-+                    CcUpdateParam(
-+                            p_CcNode->h_FmPcd,
-+                            NULL,
-+                            NULL,
-+                            &p_AdditionalInfo->keyAndNextEngineParams[keyIndex],
-+                            1,
-+                            PTR_MOVE(p_AdditionalInfo->p_AdTableNew, keyIndex*FM_PCD_CC_AD_ENTRY_SIZE),
-+                            TRUE, p_CcNodeInformation->index,
-+                            p_CcNodeInformation->h_CcNode, TRUE);
-+            if (err)
-+                RETURN_ERROR(MAJOR, err, (NO_MSG));
-+        }
-+    }
-+
-+    if (p_CcNode->lclMask)
-+        memset(p_CcNode->p_GlblMask, 0xff, CC_GLBL_MASK_SIZE * sizeof(uint8_t));
-+
-+    if (p_KeyParams->ccNextEngineParams.nextEngine == e_FM_PCD_CC)
-+        p_AdditionalInfo->h_NodeForAdd =
-+                p_KeyParams->ccNextEngineParams.params.ccParams.h_CcNode;
-+    if (p_KeyParams->ccNextEngineParams.h_Manip)
-+        p_AdditionalInfo->h_ManipForAdd =
-+                p_KeyParams->ccNextEngineParams.h_Manip;
-+
-+#if (DPAA_VERSION >= 11)
-+    if ((p_KeyParams->ccNextEngineParams.nextEngine == e_FM_PCD_FR)
-+            && (p_KeyParams->ccNextEngineParams.params.frParams.h_FrmReplic))
-+        p_AdditionalInfo->h_FrmReplicForAdd =
-+                p_KeyParams->ccNextEngineParams.params.frParams.h_FrmReplic;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    if (!add)
-+    {
-+        if (p_CcNode->keyAndNextEngineParams[keyIndex].nextEngineParams.nextEngine
-+                == e_FM_PCD_CC)
-+            p_AdditionalInfo->h_NodeForRmv =
-+                    p_CcNode->keyAndNextEngineParams[keyIndex].nextEngineParams.params.ccParams.h_CcNode;
-+
-+        if (p_CcNode->keyAndNextEngineParams[keyIndex].nextEngineParams.h_Manip)
-+            p_AdditionalInfo->h_ManipForRmv =
-+                    p_CcNode->keyAndNextEngineParams[keyIndex].nextEngineParams.h_Manip;
-+
-+        /* If statistics were previously enabled, store the old statistics object to be released */
-+        if (p_CcNode->keyAndNextEngineParams[keyIndex].p_StatsObj)
-+        {
-+            p_AdditionalInfo->p_StatsObjForRmv =
-+                    p_CcNode->keyAndNextEngineParams[keyIndex].p_StatsObj;
-+        }
-+
-+#if (DPAA_VERSION >= 11)
-+        if ((p_CcNode->keyAndNextEngineParams[keyIndex].nextEngineParams.nextEngine
-+                == e_FM_PCD_FR)
-+                && (p_CcNode->keyAndNextEngineParams[keyIndex].nextEngineParams.params.frParams.h_FrmReplic))
-+            p_AdditionalInfo->h_FrmReplicForRmv =
-+                    p_CcNode->keyAndNextEngineParams[keyIndex].nextEngineParams.params.frParams.h_FrmReplic;
-+#endif /* (DPAA_VERSION >= 11) */
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error BuildNewNodeRemoveKey(
-+        t_FmPcdCcNode *p_CcNode, uint16_t keyIndex,
-+        t_FmPcdModifyCcKeyAdditionalParams *p_AdditionalInfo)
-+{
-+    int i = 0, j = 0;
-+    t_Handle p_AdTableNewTmp, p_KeysMatchTableNewTmp;
-+    t_Handle p_KeysMatchTableOldTmp, p_AdTableOldTmp;
-+    int size;
-+    t_Error err = E_OK;
-+
-+    /*save new numOfKeys*/
-+    p_AdditionalInfo->numOfKeys = (uint16_t)(p_CcNode->numOfKeys - 1);
-+
-+    /*function which allocates in the memory new KeyTbl, AdTbl*/
-+    err = BuildNewNodeCommonPart(p_CcNode, &size, p_AdditionalInfo);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    /*update new Ad and new Key Table according to new requirement*/
-+    for (i = 0, j = 0; j < p_CcNode->numOfKeys; i++, j++)
-+    {
-+        if (j == keyIndex)
-+            j++;
-+
-+        if (j == p_CcNode->numOfKeys)
-+            break;
-+        p_AdTableNewTmp =
-+                PTR_MOVE(p_AdditionalInfo->p_AdTableNew, i * FM_PCD_CC_AD_ENTRY_SIZE);
-+        p_AdTableOldTmp =
-+                PTR_MOVE(p_AdditionalInfo->p_AdTableOld, j * FM_PCD_CC_AD_ENTRY_SIZE);
-+        MemCpy8(p_AdTableNewTmp, p_AdTableOldTmp, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+        p_KeysMatchTableOldTmp =
-+                PTR_MOVE(p_AdditionalInfo->p_KeysMatchTableOld, j * size * sizeof(uint8_t));
-+        p_KeysMatchTableNewTmp =
-+                PTR_MOVE(p_AdditionalInfo->p_KeysMatchTableNew, i * size * sizeof(uint8_t));
-+        MemCpy8(p_KeysMatchTableNewTmp, p_KeysMatchTableOldTmp,
-+                   size * sizeof(uint8_t));
-+    }
-+
-+    p_AdTableNewTmp =
-+            PTR_MOVE(p_AdditionalInfo->p_AdTableNew, i * FM_PCD_CC_AD_ENTRY_SIZE);
-+    p_AdTableOldTmp =
-+            PTR_MOVE(p_AdditionalInfo->p_AdTableOld, j * FM_PCD_CC_AD_ENTRY_SIZE);
-+    MemCpy8(p_AdTableNewTmp, p_AdTableOldTmp, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    if (p_CcNode->keyAndNextEngineParams[keyIndex].nextEngineParams.nextEngine
-+            == e_FM_PCD_CC)
-+        p_AdditionalInfo->h_NodeForRmv =
-+                p_CcNode->keyAndNextEngineParams[keyIndex].nextEngineParams.params.ccParams.h_CcNode;
-+
-+    if (p_CcNode->keyAndNextEngineParams[keyIndex].nextEngineParams.h_Manip)
-+        p_AdditionalInfo->h_ManipForRmv =
-+                p_CcNode->keyAndNextEngineParams[keyIndex].nextEngineParams.h_Manip;
-+
-+    /* If statistics were previously enabled, store the old statistics object to be released */
-+    if (p_CcNode->keyAndNextEngineParams[keyIndex].p_StatsObj)
-+    {
-+        p_AdditionalInfo->p_StatsObjForRmv =
-+                p_CcNode->keyAndNextEngineParams[keyIndex].p_StatsObj;
-+    }
-+
-+#if (DPAA_VERSION >= 11)
-+    if ((p_CcNode->keyAndNextEngineParams[keyIndex].nextEngineParams.nextEngine
-+            == e_FM_PCD_FR)
-+            && (p_CcNode->keyAndNextEngineParams[keyIndex].nextEngineParams.params.frParams.h_FrmReplic))
-+        p_AdditionalInfo->h_FrmReplicForRmv =
-+                p_CcNode->keyAndNextEngineParams[keyIndex].nextEngineParams.params.frParams.h_FrmReplic;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    return E_OK;
-+}
-+
-+static t_Error BuildNewNodeModifyKey(
-+        t_FmPcdCcNode *p_CcNode, uint16_t keyIndex, uint8_t *p_Key,
-+        uint8_t *p_Mask, t_FmPcdModifyCcKeyAdditionalParams *p_AdditionalInfo)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+    t_Error err = E_OK;
-+    t_Handle p_AdTableNewTmp, p_KeysMatchTableNewTmp;
-+    t_Handle p_KeysMatchTableOldTmp, p_AdTableOldTmp;
-+    int size;
-+    int i = 0, j = 0;
-+    bool prvLclMask;
-+    t_FmPcdStatsObj *p_StatsObj, tmpStatsObj;
-+    p_AdditionalInfo->numOfKeys = p_CcNode->numOfKeys;
-+
-+    prvLclMask = p_CcNode->lclMask;
-+
-+    /* Check that new key is not require update of localMask */
-+    err = UpdateGblMask(p_CcNode, p_CcNode->ccKeySizeAccExtraction, p_Mask);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, (NO_MSG));
-+
-+    /* Update internal data structure with new next engine for the given index */
-+    memcpy(p_AdditionalInfo->keyAndNextEngineParams[keyIndex].key, p_Key,
-+           p_CcNode->userSizeOfExtraction);
-+
-+    if (p_Mask)
-+        memcpy(p_AdditionalInfo->keyAndNextEngineParams[keyIndex].mask, p_Mask,
-+               p_CcNode->userSizeOfExtraction);
-+    else
-+        memset(p_AdditionalInfo->keyAndNextEngineParams[keyIndex].mask, 0xFF,
-+               p_CcNode->userSizeOfExtraction);
-+
-+    /*function which build in the memory new KeyTbl, AdTbl*/
-+    err = BuildNewNodeCommonPart(p_CcNode, &size, p_AdditionalInfo);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    /*fill the New AdTable and New KeyTable*/
-+    for (j = 0, i = 0; j < p_AdditionalInfo->numOfKeys; j++, i++)
-+    {
-+        p_AdTableNewTmp =
-+                PTR_MOVE(p_AdditionalInfo->p_AdTableNew, j*FM_PCD_CC_AD_ENTRY_SIZE);
-+        p_AdTableOldTmp =
-+                PTR_MOVE(p_AdditionalInfo->p_AdTableOld, i*FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+        MemCpy8(p_AdTableNewTmp, p_AdTableOldTmp, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+        if (j == keyIndex)
-+        {
-+            ASSERT_COND(keyIndex < CC_MAX_NUM_OF_KEYS);
-+            if (p_CcNode->keyAndNextEngineParams[keyIndex].p_StatsObj)
-+            {
-+                /* As statistics were enabled, we need to update the existing
-+                 statistics descriptor with a new nullified counters. */
-+                p_StatsObj = GetStatsObj(p_CcNode);
-+                ASSERT_COND(p_StatsObj);
-+
-+                SetStatsCounters(
-+                        p_AdTableNewTmp,
-+                        (uint32_t)((XX_VirtToPhys(p_StatsObj->h_StatsCounters)
-+                                - p_FmPcd->physicalMuramBase)));
-+
-+                tmpStatsObj.h_StatsAd = p_StatsObj->h_StatsAd;
-+                tmpStatsObj.h_StatsCounters = p_StatsObj->h_StatsCounters;
-+
-+                /* As we need to replace only the counters, we build a new statistics
-+                 object that holds the old AD and the new counters - this will be the
-+                 currently used statistics object.
-+                 The newly allocated AD is not required and may be released back to
-+                 the available objects with the previous counters pointer. */
-+                p_StatsObj->h_StatsAd =
-+                        p_CcNode->keyAndNextEngineParams[keyIndex].p_StatsObj->h_StatsAd;
-+
-+                p_CcNode->keyAndNextEngineParams[keyIndex].p_StatsObj->h_StatsAd =
-+                        tmpStatsObj.h_StatsAd;
-+
-+                /* Store allocated statistics object */
-+                p_AdditionalInfo->keyAndNextEngineParams[keyIndex].p_StatsObj =
-+                        p_StatsObj;
-+
-+                /* As statistics were previously enabled, store the old statistics object to be released */
-+                p_AdditionalInfo->p_StatsObjForRmv =
-+                        p_CcNode->keyAndNextEngineParams[keyIndex].p_StatsObj;
-+            }
-+
-+            p_KeysMatchTableNewTmp =
-+                    PTR_MOVE(p_AdditionalInfo->p_KeysMatchTableNew, j * size * sizeof(uint8_t));
-+
-+            MemCpy8(p_KeysMatchTableNewTmp, p_Key,
-+                        p_CcNode->userSizeOfExtraction);
-+
-+            if (p_CcNode->lclMask)
-+            {
-+                if (p_Mask)
-+                    MemCpy8(PTR_MOVE(p_KeysMatchTableNewTmp,
-+                            p_CcNode->ccKeySizeAccExtraction),
-+                                p_Mask, p_CcNode->userSizeOfExtraction);
-+                else
-+                    if (p_CcNode->ccKeySizeAccExtraction > 4)
-+                        MemSet8(PTR_MOVE(p_KeysMatchTableNewTmp,
-+                                p_CcNode->ccKeySizeAccExtraction),
-+                                   0xff, p_CcNode->userSizeOfExtraction);
-+                    else
-+                        MemCpy8(PTR_MOVE(p_KeysMatchTableNewTmp,
-+                                p_CcNode->ccKeySizeAccExtraction),
-+                                    p_CcNode->p_GlblMask,
-+                                    p_CcNode->userSizeOfExtraction);
-+            }
-+        }
-+        else
-+        {
-+            p_KeysMatchTableNewTmp =
-+                    PTR_MOVE(p_AdditionalInfo->p_KeysMatchTableNew, j * size * sizeof(uint8_t));
-+            p_KeysMatchTableOldTmp =
-+                    PTR_MOVE(p_CcNode->h_KeysMatchTable, i * size * sizeof(uint8_t));
-+
-+            if (p_CcNode->lclMask)
-+            {
-+                if (prvLclMask)
-+                    MemCpy8(
-+                            PTR_MOVE(p_KeysMatchTableNewTmp, p_CcNode->ccKeySizeAccExtraction),
-+                            PTR_MOVE(p_KeysMatchTableOldTmp, p_CcNode->ccKeySizeAccExtraction),
-+                            p_CcNode->userSizeOfExtraction);
-+                else
-+                {
-+                    p_KeysMatchTableOldTmp =
-+                            PTR_MOVE(p_CcNode->h_KeysMatchTable,
-+                                     i * (int)p_CcNode->ccKeySizeAccExtraction * sizeof(uint8_t));
-+
-+                    if (p_CcNode->ccKeySizeAccExtraction > 4)
-+                        MemSet8(PTR_MOVE(p_KeysMatchTableNewTmp,
-+                                p_CcNode->ccKeySizeAccExtraction),
-+                                   0xff, p_CcNode->userSizeOfExtraction);
-+                    else
-+                        MemCpy8(
-+                                PTR_MOVE(p_KeysMatchTableNewTmp, p_CcNode->ccKeySizeAccExtraction),
-+                                p_CcNode->p_GlblMask,
-+                                p_CcNode->userSizeOfExtraction);
-+                }
-+            }
-+            MemCpy8((void*)p_KeysMatchTableNewTmp, p_KeysMatchTableOldTmp,
-+                       p_CcNode->ccKeySizeAccExtraction);
-+        }
-+    }
-+
-+    p_AdTableNewTmp =
-+            PTR_MOVE(p_AdditionalInfo->p_AdTableNew, j * FM_PCD_CC_AD_ENTRY_SIZE);
-+    p_AdTableOldTmp = PTR_MOVE(p_CcNode->h_AdTable, i * FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    MemCpy8(p_AdTableNewTmp, p_AdTableOldTmp, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    return E_OK;
-+}
-+
-+static t_Error BuildNewNodeModifyNextEngine(
-+        t_Handle h_FmPcd, t_Handle h_FmPcdCcNodeOrTree, uint16_t keyIndex,
-+        t_FmPcdCcNextEngineParams *p_CcNextEngineParams, t_List *h_OldLst,
-+        t_List *h_NewLst, t_FmPcdModifyCcKeyAdditionalParams *p_AdditionalInfo)
-+{
-+    t_Error err = E_OK;
-+    uint32_t requiredAction = 0;
-+    t_List *p_Pos;
-+    t_CcNodeInformation *p_CcNodeInformation, ccNodeInfo;
-+    t_Handle p_Ad;
-+    t_FmPcdCcNode *p_FmPcdCcNode1 = NULL;
-+    t_FmPcdCcTree *p_FmPcdCcTree = NULL;
-+    t_FmPcdStatsObj *p_StatsObj;
-+    t_FmPcdCcStatsParams statsParams = { 0 };
-+
-+    ASSERT_COND(p_CcNextEngineParams);
-+
-+    /* check that new NIA is legal */
-+    if (!p_AdditionalInfo->tree)
-+        err = ValidateNextEngineParams(
-+                h_FmPcd, p_CcNextEngineParams,
-+                ((t_FmPcdCcNode *)h_FmPcdCcNodeOrTree)->statisticsMode);
-+    else
-+        /* Statistics are not supported for CC root */
-+        err = ValidateNextEngineParams(h_FmPcd, p_CcNextEngineParams,
-+                                       e_FM_PCD_CC_STATS_MODE_NONE);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    /* Update internal data structure for next engine per index (index - key) */
-+    memcpy(&p_AdditionalInfo->keyAndNextEngineParams[keyIndex].nextEngineParams,
-+           p_CcNextEngineParams, sizeof(t_FmPcdCcNextEngineParams));
-+
-+    /* Check that manip is legal and what requiredAction is necessary for this manip */
-+    if (p_CcNextEngineParams->h_Manip)
-+    {
-+        err = FmPcdManipCheckParamsForCcNextEngine(p_CcNextEngineParams,
-+                                                   &requiredAction);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, (NO_MSG));
-+    }
-+
-+    if (!p_AdditionalInfo->tree)
-+    {
-+        p_FmPcdCcNode1 = (t_FmPcdCcNode *)h_FmPcdCcNodeOrTree;
-+        p_AdditionalInfo->numOfKeys = p_FmPcdCcNode1->numOfKeys;
-+        p_Ad = p_FmPcdCcNode1->h_AdTable;
-+
-+        if (p_FmPcdCcNode1->keyAndNextEngineParams[keyIndex].nextEngineParams.nextEngine
-+                == e_FM_PCD_CC)
-+            p_AdditionalInfo->h_NodeForRmv =
-+                    p_FmPcdCcNode1->keyAndNextEngineParams[keyIndex].nextEngineParams.params.ccParams.h_CcNode;
-+
-+        if (p_FmPcdCcNode1->keyAndNextEngineParams[keyIndex].nextEngineParams.h_Manip)
-+            p_AdditionalInfo->h_ManipForRmv =
-+                    p_FmPcdCcNode1->keyAndNextEngineParams[keyIndex].nextEngineParams.h_Manip;
-+
-+#if (DPAA_VERSION >= 11)
-+        if ((p_FmPcdCcNode1->keyAndNextEngineParams[keyIndex].nextEngineParams.nextEngine
-+                == e_FM_PCD_FR)
-+                && (p_FmPcdCcNode1->keyAndNextEngineParams[keyIndex].nextEngineParams.params.frParams.h_FrmReplic))
-+            p_AdditionalInfo->h_FrmReplicForRmv =
-+                    p_FmPcdCcNode1->keyAndNextEngineParams[keyIndex].nextEngineParams.params.frParams.h_FrmReplic;
-+#endif /* (DPAA_VERSION >= 11) */
-+    }
-+    else
-+    {
-+        p_FmPcdCcTree = (t_FmPcdCcTree *)h_FmPcdCcNodeOrTree;
-+        p_Ad = UINT_TO_PTR(p_FmPcdCcTree->ccTreeBaseAddr);
-+
-+        if (p_FmPcdCcTree->keyAndNextEngineParams[keyIndex].nextEngineParams.nextEngine
-+                == e_FM_PCD_CC)
-+            p_AdditionalInfo->h_NodeForRmv =
-+                    p_FmPcdCcTree->keyAndNextEngineParams[keyIndex].nextEngineParams.params.ccParams.h_CcNode;
-+
-+        if (p_FmPcdCcTree->keyAndNextEngineParams[keyIndex].nextEngineParams.h_Manip)
-+            p_AdditionalInfo->h_ManipForRmv =
-+                    p_FmPcdCcTree->keyAndNextEngineParams[keyIndex].nextEngineParams.h_Manip;
-+
-+#if (DPAA_VERSION >= 11)
-+        if ((p_FmPcdCcTree->keyAndNextEngineParams[keyIndex].nextEngineParams.nextEngine
-+                == e_FM_PCD_FR)
-+                && (p_FmPcdCcTree->keyAndNextEngineParams[keyIndex].nextEngineParams.params.frParams.h_FrmReplic))
-+            p_AdditionalInfo->h_FrmReplicForRmv =
-+                    p_FmPcdCcTree->keyAndNextEngineParams[keyIndex].nextEngineParams.params.frParams.h_FrmReplic;
-+#endif /* (DPAA_VERSION >= 11) */
-+    }
-+
-+    if ((p_CcNextEngineParams->nextEngine == e_FM_PCD_CC)
-+            && p_CcNextEngineParams->h_Manip)
-+    {
-+        err = AllocAndFillAdForContLookupManip(
-+                p_CcNextEngineParams->params.ccParams.h_CcNode);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, (NO_MSG));
-+    }
-+
-+    ASSERT_COND(p_Ad);
-+
-+    memset(&ccNodeInfo, 0, sizeof(t_CcNodeInformation));
-+    ccNodeInfo.h_CcNode = PTR_MOVE(p_Ad, keyIndex * FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    /* If statistics were enabled, this Ad is the statistics Ad. Need to follow its
-+     nextAction to retrieve the actual Nia-Ad. If statistics should remain enabled,
-+     only the actual Nia-Ad should be modified. */
-+    if ((!p_AdditionalInfo->tree)
-+            && (((t_FmPcdCcNode *)h_FmPcdCcNodeOrTree)->keyAndNextEngineParams[keyIndex].p_StatsObj)
-+            && (p_CcNextEngineParams->statisticsEn))
-+        ccNodeInfo.h_CcNode =
-+                ((t_FmPcdCcNode *)h_FmPcdCcNodeOrTree)->keyAndNextEngineParams[keyIndex].p_StatsObj->h_StatsAd;
-+
-+    EnqueueNodeInfoToRelevantLst(h_OldLst, &ccNodeInfo, NULL);
-+
-+    memset(&ccNodeInfo, 0, sizeof(t_CcNodeInformation));
-+    p_Ad = GetNewAd(h_FmPcdCcNodeOrTree, p_AdditionalInfo->tree);
-+    if (!p_Ad)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                     ("MURAM allocation for CC node action descriptor"));
-+    MemSet8((uint8_t *)p_Ad, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    /* If statistics were not enabled before, but requested now -  Allocate a statistics
-+     object that holds statistics AD and counters. */
-+    if ((!p_AdditionalInfo->tree)
-+            && (!((t_FmPcdCcNode *)h_FmPcdCcNodeOrTree)->keyAndNextEngineParams[keyIndex].p_StatsObj)
-+            && (p_CcNextEngineParams->statisticsEn))
-+    {
-+        p_StatsObj = GetStatsObj((t_FmPcdCcNode *)h_FmPcdCcNodeOrTree);
-+        ASSERT_COND(p_StatsObj);
-+
-+        /* Store allocated statistics object */
-+        p_AdditionalInfo->keyAndNextEngineParams[keyIndex].p_StatsObj =
-+                p_StatsObj;
-+
-+        statsParams.h_StatsAd = p_StatsObj->h_StatsAd;
-+        statsParams.h_StatsCounters = p_StatsObj->h_StatsCounters;
-+
-+#if (DPAA_VERSION >= 11)
-+        statsParams.h_StatsFLRs =
-+                ((t_FmPcdCcNode *)h_FmPcdCcNodeOrTree)->h_StatsFLRs;
-+
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+        NextStepAd(p_Ad, &statsParams, p_CcNextEngineParams, h_FmPcd);
-+    }
-+    else
-+        NextStepAd(p_Ad, NULL, p_CcNextEngineParams, h_FmPcd);
-+
-+    ccNodeInfo.h_CcNode = p_Ad;
-+    EnqueueNodeInfoToRelevantLst(h_NewLst, &ccNodeInfo, NULL);
-+
-+    p_AdditionalInfo->keyAndNextEngineParams[keyIndex].requiredAction =
-+            requiredAction;
-+    p_AdditionalInfo->keyAndNextEngineParams[keyIndex].requiredAction |=
-+            UPDATE_CC_WITH_TREE;
-+
-+    if (!p_AdditionalInfo->tree)
-+    {
-+        ASSERT_COND(p_FmPcdCcNode1);
-+        if (!LIST_IsEmpty(&p_FmPcdCcNode1->ccTreesLst))
-+        {
-+            LIST_FOR_EACH(p_Pos, &p_FmPcdCcNode1->ccTreesLst)
-+            {
-+                p_CcNodeInformation = CC_NODE_F_OBJECT(p_Pos);
-+
-+                ASSERT_COND(p_CcNodeInformation->h_CcNode);
-+                /* Update the manipulation which has to be updated from parameters of the port
-+                 it's has to be updated with restrictions defined in the function */
-+
-+                err =
-+                        SetRequiredAction(
-+                                p_FmPcdCcNode1->h_FmPcd,
-+                                p_FmPcdCcNode1->shadowAction
-+                                        | p_AdditionalInfo->keyAndNextEngineParams[keyIndex].requiredAction,
-+                                &p_AdditionalInfo->keyAndNextEngineParams[keyIndex],
-+                                p_Ad, 1, p_CcNodeInformation->h_CcNode);
-+                if (err)
-+                    RETURN_ERROR(MAJOR, err, (NO_MSG));
-+
-+                err = CcUpdateParam(
-+                        p_FmPcdCcNode1->h_FmPcd, NULL, NULL,
-+                        &p_AdditionalInfo->keyAndNextEngineParams[keyIndex], 1,
-+                        p_Ad, TRUE, p_CcNodeInformation->index,
-+                        p_CcNodeInformation->h_CcNode, TRUE);
-+                if (err)
-+                    RETURN_ERROR(MAJOR, err, (NO_MSG));
-+            }
-+        }
-+    }
-+    else
-+    {
-+        ASSERT_COND(p_FmPcdCcTree);
-+
-+        err =
-+                SetRequiredAction(
-+                        h_FmPcd,
-+                        p_FmPcdCcTree->requiredAction
-+                                | p_AdditionalInfo->keyAndNextEngineParams[keyIndex].requiredAction,
-+                        &p_AdditionalInfo->keyAndNextEngineParams[keyIndex],
-+                        p_Ad, 1, (t_Handle)p_FmPcdCcTree);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, (NO_MSG));
-+
-+        err = CcUpdateParam(h_FmPcd, NULL, NULL,
-+                            &p_AdditionalInfo->keyAndNextEngineParams[keyIndex],
-+                            1, p_Ad, TRUE, 0, (t_Handle)p_FmPcdCcTree, TRUE);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, (NO_MSG));
-+    }
-+
-+    if (p_CcNextEngineParams->nextEngine == e_FM_PCD_CC)
-+        p_AdditionalInfo->h_NodeForAdd =
-+                p_CcNextEngineParams->params.ccParams.h_CcNode;
-+    if (p_CcNextEngineParams->h_Manip)
-+        p_AdditionalInfo->h_ManipForAdd = p_CcNextEngineParams->h_Manip;
-+
-+    /* If statistics were previously enabled, but now are disabled,
-+     store the old statistics object to be released */
-+    if ((!p_AdditionalInfo->tree)
-+            && (((t_FmPcdCcNode *)h_FmPcdCcNodeOrTree)->keyAndNextEngineParams[keyIndex].p_StatsObj)
-+            && (!p_CcNextEngineParams->statisticsEn))
-+    {
-+        p_AdditionalInfo->p_StatsObjForRmv =
-+                ((t_FmPcdCcNode *)h_FmPcdCcNodeOrTree)->keyAndNextEngineParams[keyIndex].p_StatsObj;
-+
-+
-+        p_AdditionalInfo->keyAndNextEngineParams[keyIndex].p_StatsObj = NULL;
-+    }
-+#if (DPAA_VERSION >= 11)
-+    if ((p_CcNextEngineParams->nextEngine == e_FM_PCD_FR)
-+            && (p_CcNextEngineParams->params.frParams.h_FrmReplic))
-+        p_AdditionalInfo->h_FrmReplicForAdd =
-+                p_CcNextEngineParams->params.frParams.h_FrmReplic;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    return E_OK;
-+}
-+
-+static void UpdateAdPtrOfNodesWhichPointsOnCrntMdfNode(
-+        t_FmPcdCcNode *p_CrntMdfNode, t_List *h_OldLst,
-+        t_FmPcdCcNextEngineParams **p_NextEngineParams)
-+{
-+    t_CcNodeInformation *p_CcNodeInformation;
-+    t_FmPcdCcNode *p_NodePtrOnCurrentMdfNode = NULL;
-+    t_List *p_Pos;
-+    int i = 0;
-+    t_Handle p_AdTablePtOnCrntCurrentMdfNode/*, p_AdTableNewModified*/;
-+    t_CcNodeInformation ccNodeInfo;
-+
-+    LIST_FOR_EACH(p_Pos, &p_CrntMdfNode->ccPrevNodesLst)
-+    {
-+        p_CcNodeInformation = CC_NODE_F_OBJECT(p_Pos);
-+        p_NodePtrOnCurrentMdfNode =
-+                (t_FmPcdCcNode *)p_CcNodeInformation->h_CcNode;
-+
-+        ASSERT_COND(p_NodePtrOnCurrentMdfNode);
-+
-+        /* Search in the previous node which exact index points on this current modified node for getting AD */
-+        for (i = 0; i < p_NodePtrOnCurrentMdfNode->numOfKeys + 1; i++)
-+        {
-+            if (p_NodePtrOnCurrentMdfNode->keyAndNextEngineParams[i].nextEngineParams.nextEngine
-+                    == e_FM_PCD_CC)
-+            {
-+                if (p_NodePtrOnCurrentMdfNode->keyAndNextEngineParams[i].nextEngineParams.params.ccParams.h_CcNode
-+                        == (t_Handle)p_CrntMdfNode)
-+                {
-+                    if (p_NodePtrOnCurrentMdfNode->keyAndNextEngineParams[i].nextEngineParams.h_Manip)
-+                        p_AdTablePtOnCrntCurrentMdfNode = p_CrntMdfNode->h_Ad;
-+                    else
-+                        if (p_NodePtrOnCurrentMdfNode->keyAndNextEngineParams[i].p_StatsObj)
-+                            p_AdTablePtOnCrntCurrentMdfNode =
-+                                    p_NodePtrOnCurrentMdfNode->keyAndNextEngineParams[i].p_StatsObj->h_StatsAd;
-+                        else
-+                            p_AdTablePtOnCrntCurrentMdfNode =
-+                                    PTR_MOVE(p_NodePtrOnCurrentMdfNode->h_AdTable, i*FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+                    memset(&ccNodeInfo, 0, sizeof(t_CcNodeInformation));
-+                    ccNodeInfo.h_CcNode = p_AdTablePtOnCrntCurrentMdfNode;
-+                    EnqueueNodeInfoToRelevantLst(h_OldLst, &ccNodeInfo, NULL);
-+
-+                    if (!(*p_NextEngineParams))
-+                        *p_NextEngineParams =
-+                                &p_NodePtrOnCurrentMdfNode->keyAndNextEngineParams[i].nextEngineParams;
-+                }
-+            }
-+        }
-+
-+        ASSERT_COND(i != p_NodePtrOnCurrentMdfNode->numOfKeys);
-+    }
-+}
-+
-+static void UpdateAdPtrOfTreesWhichPointsOnCrntMdfNode(
-+        t_FmPcdCcNode *p_CrntMdfNode, t_List *h_OldLst,
-+        t_FmPcdCcNextEngineParams **p_NextEngineParams)
-+{
-+    t_CcNodeInformation *p_CcNodeInformation;
-+    t_FmPcdCcTree *p_TreePtrOnCurrentMdfNode = NULL;
-+    t_List *p_Pos;
-+    int i = 0;
-+    t_Handle p_AdTableTmp;
-+    t_CcNodeInformation ccNodeInfo;
-+
-+    LIST_FOR_EACH(p_Pos, &p_CrntMdfNode->ccTreeIdLst)
-+    {
-+        p_CcNodeInformation = CC_NODE_F_OBJECT(p_Pos);
-+        p_TreePtrOnCurrentMdfNode =
-+                (t_FmPcdCcTree *)p_CcNodeInformation->h_CcNode;
-+
-+        ASSERT_COND(p_TreePtrOnCurrentMdfNode);
-+
-+        /*search in the trees which exact index points on this current modified node for getting AD */
-+        for (i = 0; i < p_TreePtrOnCurrentMdfNode->numOfEntries; i++)
-+        {
-+            if (p_TreePtrOnCurrentMdfNode->keyAndNextEngineParams[i].nextEngineParams.nextEngine
-+                    == e_FM_PCD_CC)
-+            {
-+                if (p_TreePtrOnCurrentMdfNode->keyAndNextEngineParams[i].nextEngineParams.params.ccParams.h_CcNode
-+                        == (t_Handle)p_CrntMdfNode)
-+                {
-+                    p_AdTableTmp =
-+                            UINT_TO_PTR(p_TreePtrOnCurrentMdfNode->ccTreeBaseAddr + i*FM_PCD_CC_AD_ENTRY_SIZE);
-+                    memset(&ccNodeInfo, 0, sizeof(t_CcNodeInformation));
-+                    ccNodeInfo.h_CcNode = p_AdTableTmp;
-+                    EnqueueNodeInfoToRelevantLst(h_OldLst, &ccNodeInfo, NULL);
-+
-+                    if (!(*p_NextEngineParams))
-+                        *p_NextEngineParams =
-+                                &p_TreePtrOnCurrentMdfNode->keyAndNextEngineParams[i].nextEngineParams;
-+                }
-+            }
-+        }
-+
-+        ASSERT_COND(i == p_TreePtrOnCurrentMdfNode->numOfEntries);
-+    }
-+}
-+
-+static t_FmPcdModifyCcKeyAdditionalParams * ModifyNodeCommonPart(
-+        t_Handle h_FmPcdCcNodeOrTree, uint16_t keyIndex,
-+        e_ModifyState modifyState, bool ttlCheck, bool hashCheck, bool tree)
-+{
-+    t_FmPcdModifyCcKeyAdditionalParams *p_FmPcdModifyCcKeyAdditionalParams;
-+    int i = 0, j = 0;
-+    bool wasUpdate = FALSE;
-+    t_FmPcdCcNode *p_CcNode = NULL;
-+    t_FmPcdCcTree *p_FmPcdCcTree;
-+    uint16_t numOfKeys;
-+    t_FmPcdCcKeyAndNextEngineParams *p_KeyAndNextEngineParams;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmPcdCcNodeOrTree, E_INVALID_HANDLE, NULL);
-+
-+    if (!tree)
-+    {
-+        p_CcNode = (t_FmPcdCcNode *)h_FmPcdCcNodeOrTree;
-+        numOfKeys = p_CcNode->numOfKeys;
-+
-+        /* node has to be pointed by another node or tree */
-+
-+        p_KeyAndNextEngineParams = (t_FmPcdCcKeyAndNextEngineParams *)XX_Malloc(
-+                sizeof(t_FmPcdCcKeyAndNextEngineParams) * (numOfKeys + 1));
-+        if (!p_KeyAndNextEngineParams)
-+        {
-+            REPORT_ERROR(MAJOR, E_NO_MEMORY, ("Next engine and required action structure"));
-+            return NULL;
-+        }
-+        memcpy(p_KeyAndNextEngineParams, p_CcNode->keyAndNextEngineParams,
-+               (numOfKeys + 1) * sizeof(t_FmPcdCcKeyAndNextEngineParams));
-+
-+        if (ttlCheck)
-+        {
-+            if ((p_CcNode->parseCode == CC_PC_FF_IPV4TTL)
-+                    || (p_CcNode->parseCode == CC_PC_FF_IPV6HOP_LIMIT))
-+            {
-+                XX_Free(p_KeyAndNextEngineParams);
-+                REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("nodeId of CC_PC_FF_IPV4TTL or CC_PC_FF_IPV6HOP_LIMIT can not be used for this operation"));
-+                return NULL;
-+            }
-+        }
-+
-+        if (hashCheck)
-+        {
-+            if (p_CcNode->parseCode == CC_PC_GENERIC_IC_HASH_INDEXED)
-+            {
-+                XX_Free(p_KeyAndNextEngineParams);
-+                REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("nodeId of CC_PC_GENERIC_IC_HASH_INDEXED can not be used for this operation"));
-+                return NULL;
-+            }
-+        }
-+    }
-+    else
-+    {
-+        p_FmPcdCcTree = (t_FmPcdCcTree *)h_FmPcdCcNodeOrTree;
-+        numOfKeys = p_FmPcdCcTree->numOfEntries;
-+
-+        p_KeyAndNextEngineParams = (t_FmPcdCcKeyAndNextEngineParams *)XX_Malloc(
-+                sizeof(t_FmPcdCcKeyAndNextEngineParams)
-+                        * FM_PCD_MAX_NUM_OF_CC_GROUPS);
-+        if (!p_KeyAndNextEngineParams)
-+        {
-+            REPORT_ERROR(MAJOR, E_NO_MEMORY, ("Next engine and required action structure"));
-+            return NULL;
-+        }
-+        memcpy(p_KeyAndNextEngineParams,
-+               p_FmPcdCcTree->keyAndNextEngineParams,
-+               FM_PCD_MAX_NUM_OF_CC_GROUPS
-+                       * sizeof(t_FmPcdCcKeyAndNextEngineParams));
-+    }
-+
-+    p_FmPcdModifyCcKeyAdditionalParams =
-+            (t_FmPcdModifyCcKeyAdditionalParams *)XX_Malloc(
-+                    sizeof(t_FmPcdModifyCcKeyAdditionalParams));
-+    if (!p_FmPcdModifyCcKeyAdditionalParams)
-+    {
-+        XX_Free(p_KeyAndNextEngineParams);
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("Allocation of internal data structure FAILED"));
-+        return NULL;
-+    }
-+    memset(p_FmPcdModifyCcKeyAdditionalParams, 0,
-+           sizeof(t_FmPcdModifyCcKeyAdditionalParams));
-+
-+    p_FmPcdModifyCcKeyAdditionalParams->h_CurrentNode = h_FmPcdCcNodeOrTree;
-+    p_FmPcdModifyCcKeyAdditionalParams->savedKeyIndex = keyIndex;
-+
-+    while (i < numOfKeys)
-+    {
-+        if ((j == keyIndex) && !wasUpdate)
-+        {
-+            if (modifyState == e_MODIFY_STATE_ADD)
-+                j++;
-+            else
-+                if (modifyState == e_MODIFY_STATE_REMOVE)
-+                    i++;
-+            wasUpdate = TRUE;
-+        }
-+        else
-+        {
-+            memcpy(&p_FmPcdModifyCcKeyAdditionalParams->keyAndNextEngineParams[j],
-+                   p_KeyAndNextEngineParams + i,
-+                   sizeof(t_FmPcdCcKeyAndNextEngineParams));
-+            i++;
-+            j++;
-+        }
-+    }
-+
-+    if (keyIndex == numOfKeys)
-+    {
-+        if (modifyState == e_MODIFY_STATE_ADD)
-+            j++;
-+    }
-+
-+    memcpy(&p_FmPcdModifyCcKeyAdditionalParams->keyAndNextEngineParams[j],
-+           p_KeyAndNextEngineParams + numOfKeys,
-+           sizeof(t_FmPcdCcKeyAndNextEngineParams));
-+
-+    XX_Free(p_KeyAndNextEngineParams);
-+
-+    return p_FmPcdModifyCcKeyAdditionalParams;
-+}
-+
-+static t_Error UpdatePtrWhichPointOnCrntMdfNode(
-+        t_FmPcdCcNode *p_CcNode,
-+        t_FmPcdModifyCcKeyAdditionalParams *p_FmPcdModifyCcKeyAdditionalParams,
-+        t_List *h_OldLst, t_List *h_NewLst)
-+{
-+    t_FmPcdCcNextEngineParams *p_NextEngineParams = NULL;
-+    t_CcNodeInformation ccNodeInfo = { 0 };
-+    t_Handle h_NewAd;
-+    t_Handle h_OrigAd = NULL;
-+
-+    /* Building a list of all action descriptors that point to the previous node */
-+    if (!LIST_IsEmpty(&p_CcNode->ccPrevNodesLst))
-+        UpdateAdPtrOfNodesWhichPointsOnCrntMdfNode(p_CcNode, h_OldLst,
-+                                                   &p_NextEngineParams);
-+
-+    if (!LIST_IsEmpty(&p_CcNode->ccTreeIdLst))
-+        UpdateAdPtrOfTreesWhichPointsOnCrntMdfNode(p_CcNode, h_OldLst,
-+                                                   &p_NextEngineParams);
-+
-+    /* This node must be found as next engine of one of its previous nodes or trees*/
-+    if (p_NextEngineParams)
-+    {
-+        /* Building a new action descriptor that points to the modified node */
-+        h_NewAd = GetNewAd(p_CcNode, FALSE);
-+        if (!h_NewAd)
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+        MemSet8(h_NewAd, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+        h_OrigAd = p_CcNode->h_Ad;
-+        BuildNewAd(h_NewAd, p_FmPcdModifyCcKeyAdditionalParams, p_CcNode,
-+                   p_NextEngineParams);
-+
-+        ccNodeInfo.h_CcNode = h_NewAd;
-+        EnqueueNodeInfoToRelevantLst(h_NewLst, &ccNodeInfo, NULL);
-+
-+        if (p_NextEngineParams->h_Manip && !h_OrigAd)
-+            FmPcdManipUpdateOwner(p_NextEngineParams->h_Manip, FALSE);
-+    }
-+    return E_OK;
-+}
-+
-+static void UpdateCcRootOwner(t_FmPcdCcTree *p_FmPcdCcTree, bool add)
-+{
-+    ASSERT_COND(p_FmPcdCcTree);
-+
-+    /* this routine must be protected by the calling routine! */
-+
-+    if (add)
-+        p_FmPcdCcTree->owners++;
-+    else
-+    {
-+        ASSERT_COND(p_FmPcdCcTree->owners);
-+        p_FmPcdCcTree->owners--;
-+    }
-+}
-+
-+static t_Error CheckAndSetManipParamsWithCcNodeParams(t_FmPcdCcNode *p_CcNode)
-+{
-+    t_Error err = E_OK;
-+    int i = 0;
-+
-+    for (i = 0; i < p_CcNode->numOfKeys; i++)
-+    {
-+        if (p_CcNode->keyAndNextEngineParams[i].nextEngineParams.h_Manip)
-+        {
-+            err =
-+                    FmPcdManipCheckParamsWithCcNodeParams(
-+                            p_CcNode->keyAndNextEngineParams[i].nextEngineParams.h_Manip,
-+                            (t_Handle)p_CcNode);
-+            if (err)
-+                return err;
-+        }
-+    }
-+
-+    return err;
-+}
-+static t_Error ValidateAndCalcStatsParams(t_FmPcdCcNode *p_CcNode,
-+                                          t_FmPcdCcNodeParams *p_CcNodeParam,
-+                                          uint32_t *p_NumOfRanges,
-+                                          uint32_t *p_CountersArraySize)
-+{
-+    e_FmPcdCcStatsMode statisticsMode = p_CcNode->statisticsMode;
-+    uint32_t i;
-+
-+    UNUSED(p_CcNodeParam);
-+
-+    switch (statisticsMode)
-+    {
-+        case e_FM_PCD_CC_STATS_MODE_NONE:
-+            for (i = 0; i < p_CcNode->numOfKeys; i++)
-+                if (p_CcNodeParam->keysParams.keyParams[i].ccNextEngineParams.statisticsEn)
-+                    RETURN_ERROR(
-+                            MAJOR,
-+                            E_INVALID_VALUE,
-+                            ("Statistics cannot be enabled for key %d when statistics mode was set to 'NONE'", i));
-+            return E_OK;
-+
-+        case e_FM_PCD_CC_STATS_MODE_FRAME:
-+        case e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME:
-+            *p_NumOfRanges = 1;
-+            *p_CountersArraySize = 2 * FM_PCD_CC_STATS_COUNTER_SIZE;
-+            return E_OK;
-+
-+#if (DPAA_VERSION >= 11)
-+        case e_FM_PCD_CC_STATS_MODE_RMON:
-+        {
-+            uint16_t *p_FrameLengthRanges =
-+                    p_CcNodeParam->keysParams.frameLengthRanges;
-+            uint32_t i;
-+
-+            if (p_FrameLengthRanges[0] <= 0)
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Statistics mode"));
-+
-+            if (p_FrameLengthRanges[0] == 0xFFFF)
-+            {
-+                *p_NumOfRanges = 1;
-+                *p_CountersArraySize = 2 * FM_PCD_CC_STATS_COUNTER_SIZE;
-+                return E_OK;
-+            }
-+
-+            for (i = 1; i < FM_PCD_CC_STATS_MAX_NUM_OF_FLR; i++)
-+            {
-+                if (p_FrameLengthRanges[i - 1] >= p_FrameLengthRanges[i])
-+                    RETURN_ERROR(
-+                            MAJOR,
-+                            E_INVALID_VALUE,
-+                            ("Frame length range must be larger at least by 1 from preceding range"));
-+
-+                /* Stop when last range is reached */
-+                if (p_FrameLengthRanges[i] == 0xFFFF)
-+                    break;
-+            }
-+
-+            if ((i >= FM_PCD_CC_STATS_MAX_NUM_OF_FLR)
-+                    || (p_FrameLengthRanges[i] != 0xFFFF))
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                             ("Last Frame length range must be 0xFFFF"));
-+
-+            *p_NumOfRanges = i + 1;
-+
-+            /* Allocate an extra counter for byte count, as counters
-+             array always begins with byte count */
-+            *p_CountersArraySize = (*p_NumOfRanges + 1)
-+                    * FM_PCD_CC_STATS_COUNTER_SIZE;
-+
-+        }
-+            return E_OK;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+        default:
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Statistics mode"));
-+    }
-+}
-+
-+static t_Error CheckParams(t_Handle h_FmPcd, t_FmPcdCcNodeParams *p_CcNodeParam,
-+                           t_FmPcdCcNode *p_CcNode, bool *isKeyTblAlloc)
-+{
-+    int tmp = 0;
-+    t_FmPcdCcKeyParams *p_KeyParams;
-+    t_Error err;
-+    uint32_t requiredAction = 0;
-+
-+    /* Validate statistics parameters */
-+    err = ValidateAndCalcStatsParams(p_CcNode, p_CcNodeParam,
-+                                     &(p_CcNode->numOfStatsFLRs),
-+                                     &(p_CcNode->countersArraySize));
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, ("Invalid statistics parameters"));
-+
-+    /* Validate next engine parameters on Miss */
-+    err = ValidateNextEngineParams(
-+            h_FmPcd, &p_CcNodeParam->keysParams.ccNextEngineParamsForMiss,
-+            p_CcNode->statisticsMode);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err,
-+                     ("For this node MissNextEngineParams are not valid"));
-+
-+    if (p_CcNodeParam->keysParams.ccNextEngineParamsForMiss.h_Manip)
-+    {
-+        err = FmPcdManipCheckParamsForCcNextEngine(
-+                &p_CcNodeParam->keysParams.ccNextEngineParamsForMiss,
-+                &requiredAction);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, (NO_MSG));
-+    }
-+
-+    memcpy(&p_CcNode->keyAndNextEngineParams[p_CcNode->numOfKeys].nextEngineParams,
-+           &p_CcNodeParam->keysParams.ccNextEngineParamsForMiss,
-+           sizeof(t_FmPcdCcNextEngineParams));
-+
-+    p_CcNode->keyAndNextEngineParams[p_CcNode->numOfKeys].requiredAction =
-+            requiredAction;
-+
-+    if ((p_CcNode->keyAndNextEngineParams[p_CcNode->numOfKeys].nextEngineParams.nextEngine
-+            == e_FM_PCD_CC)
-+            && p_CcNode->keyAndNextEngineParams[p_CcNode->numOfKeys].nextEngineParams.h_Manip)
-+    {
-+        err =
-+                AllocAndFillAdForContLookupManip(
-+                        p_CcNode->keyAndNextEngineParams[p_CcNode->numOfKeys].nextEngineParams.params.ccParams.h_CcNode);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, (NO_MSG));
-+    }
-+
-+    for (tmp = 0; tmp < p_CcNode->numOfKeys; tmp++)
-+    {
-+        p_KeyParams = &p_CcNodeParam->keysParams.keyParams[tmp];
-+
-+        if (!p_KeyParams->p_Key)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("p_Key is not initialized"));
-+
-+        err = ValidateNextEngineParams(h_FmPcd,
-+                                       &p_KeyParams->ccNextEngineParams,
-+                                       p_CcNode->statisticsMode);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, (NO_MSG));
-+
-+        err = UpdateGblMask(p_CcNode, p_CcNodeParam->keysParams.keySize,
-+                            p_KeyParams->p_Mask);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, (NO_MSG));
-+
-+        if (p_KeyParams->ccNextEngineParams.h_Manip)
-+        {
-+            err = FmPcdManipCheckParamsForCcNextEngine(
-+                    &p_KeyParams->ccNextEngineParams, &requiredAction);
-+            if (err)
-+                RETURN_ERROR(MAJOR, err, (NO_MSG));
-+        }
-+
-+        /* Store 'key' parameters - key, mask (if passed by the user) */
-+        memcpy(p_CcNode->keyAndNextEngineParams[tmp].key, p_KeyParams->p_Key,
-+               p_CcNodeParam->keysParams.keySize);
-+
-+        if (p_KeyParams->p_Mask)
-+            memcpy(p_CcNode->keyAndNextEngineParams[tmp].mask,
-+                   p_KeyParams->p_Mask, p_CcNodeParam->keysParams.keySize);
-+        else
-+            memset((void *)(p_CcNode->keyAndNextEngineParams[tmp].mask), 0xFF,
-+                   p_CcNodeParam->keysParams.keySize);
-+
-+        /* Store next engine parameters */
-+        memcpy(&p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams,
-+               &p_KeyParams->ccNextEngineParams,
-+               sizeof(t_FmPcdCcNextEngineParams));
-+
-+        p_CcNode->keyAndNextEngineParams[tmp].requiredAction = requiredAction;
-+
-+        if ((p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams.nextEngine
-+                == e_FM_PCD_CC)
-+                && p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams.h_Manip)
-+        {
-+            err =
-+                    AllocAndFillAdForContLookupManip(
-+                            p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams.params.ccParams.h_CcNode);
-+            if (err)
-+                RETURN_ERROR(MAJOR, err, (NO_MSG));
-+        }
-+    }
-+
-+    if (p_CcNode->maxNumOfKeys)
-+    {
-+        if (p_CcNode->maxNumOfKeys < p_CcNode->numOfKeys)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("Number of keys exceed the provided maximal number of keys"));
-+    }
-+
-+    *isKeyTblAlloc = TRUE;
-+
-+    return E_OK;
-+}
-+
-+static t_Error Ipv4TtlOrIpv6HopLimitCheckParams(
-+        t_Handle h_FmPcd, t_FmPcdCcNodeParams *p_CcNodeParam,
-+        t_FmPcdCcNode *p_CcNode, bool *isKeyTblAlloc)
-+{
-+    int tmp = 0;
-+    t_FmPcdCcKeyParams *p_KeyParams;
-+    t_Error err;
-+    uint8_t key = 0x01;
-+    uint32_t requiredAction = 0;
-+
-+    if (p_CcNode->numOfKeys != 1)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("For node of the type IPV4_TTL or IPV6_HOP_LIMIT the maximal supported 'numOfKeys' is 1"));
-+
-+    if ((p_CcNodeParam->keysParams.maxNumOfKeys)
-+            && (p_CcNodeParam->keysParams.maxNumOfKeys != 1))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("For node of the type IPV4_TTL or IPV6_HOP_LIMIT the maximal supported 'maxNumOfKeys' is 1"));
-+
-+    /* Validate statistics parameters */
-+    err = ValidateAndCalcStatsParams(p_CcNode, p_CcNodeParam,
-+                                     &(p_CcNode->numOfStatsFLRs),
-+                                     &(p_CcNode->countersArraySize));
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, ("Invalid statistics parameters"));
-+
-+    err = ValidateNextEngineParams(
-+            h_FmPcd, &p_CcNodeParam->keysParams.ccNextEngineParamsForMiss,
-+            p_CcNodeParam->keysParams.statisticsMode);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err,
-+                     ("For this node MissNextEngineParams are not valid"));
-+
-+    if (p_CcNodeParam->keysParams.ccNextEngineParamsForMiss.h_Manip)
-+    {
-+        err = FmPcdManipCheckParamsForCcNextEngine(
-+                &p_CcNodeParam->keysParams.ccNextEngineParamsForMiss,
-+                &requiredAction);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, (NO_MSG));
-+    }
-+
-+    memcpy(&p_CcNode->keyAndNextEngineParams[p_CcNode->numOfKeys].nextEngineParams,
-+           &p_CcNodeParam->keysParams.ccNextEngineParamsForMiss,
-+           sizeof(t_FmPcdCcNextEngineParams));
-+
-+    p_CcNode->keyAndNextEngineParams[p_CcNode->numOfKeys].requiredAction =
-+            requiredAction;
-+
-+    if ((p_CcNode->keyAndNextEngineParams[p_CcNode->numOfKeys].nextEngineParams.nextEngine
-+            == e_FM_PCD_CC)
-+            && p_CcNode->keyAndNextEngineParams[p_CcNode->numOfKeys].nextEngineParams.h_Manip)
-+    {
-+        err =
-+                AllocAndFillAdForContLookupManip(
-+                        p_CcNode->keyAndNextEngineParams[p_CcNode->numOfKeys].nextEngineParams.params.ccParams.h_CcNode);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, (NO_MSG));
-+    }
-+
-+    for (tmp = 0; tmp < p_CcNode->numOfKeys; tmp++)
-+    {
-+        p_KeyParams = &p_CcNodeParam->keysParams.keyParams[tmp];
-+
-+        if (p_KeyParams->p_Mask)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("For node of the type IPV4_TTL or IPV6_HOP_LIMIT p_Mask can not be initialized"));
-+
-+        if (memcmp(p_KeyParams->p_Key, &key, 1) != 0)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("For node of the type IPV4_TTL or IPV6_HOP_LIMIT p_Key has to be 1"));
-+
-+        err = ValidateNextEngineParams(h_FmPcd,
-+                                       &p_KeyParams->ccNextEngineParams,
-+                                       p_CcNode->statisticsMode);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, (NO_MSG));
-+
-+        if (p_KeyParams->ccNextEngineParams.h_Manip)
-+        {
-+            err = FmPcdManipCheckParamsForCcNextEngine(
-+                    &p_KeyParams->ccNextEngineParams, &requiredAction);
-+            if (err)
-+                RETURN_ERROR(MAJOR, err, (NO_MSG));
-+        }
-+
-+        /* Store 'key' parameters - key (fixed to 0x01), key size of 1 byte and full mask */
-+        p_CcNode->keyAndNextEngineParams[tmp].key[0] = key;
-+        p_CcNode->keyAndNextEngineParams[tmp].mask[0] = 0xFF;
-+
-+        /* Store NextEngine parameters */
-+        memcpy(&p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams,
-+               &p_KeyParams->ccNextEngineParams,
-+               sizeof(t_FmPcdCcNextEngineParams));
-+
-+        if ((p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams.nextEngine
-+                == e_FM_PCD_CC)
-+                && p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams.h_Manip)
-+        {
-+            err =
-+                    AllocAndFillAdForContLookupManip(
-+                            p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams.params.ccParams.h_CcNode);
-+            if (err)
-+                RETURN_ERROR(MAJOR, err, (NO_MSG));
-+        }
-+        p_CcNode->keyAndNextEngineParams[tmp].requiredAction = requiredAction;
-+    }
-+
-+    *isKeyTblAlloc = FALSE;
-+
-+    return E_OK;
-+}
-+
-+static t_Error IcHashIndexedCheckParams(t_Handle h_FmPcd,
-+                                        t_FmPcdCcNodeParams *p_CcNodeParam,
-+                                        t_FmPcdCcNode *p_CcNode,
-+                                        bool *isKeyTblAlloc)
-+{
-+    int tmp = 0, countOnes = 0;
-+    t_FmPcdCcKeyParams *p_KeyParams;
-+    t_Error err;
-+    uint16_t glblMask = p_CcNodeParam->extractCcParams.extractNonHdr.icIndxMask;
-+    uint16_t countMask = (uint16_t)(glblMask >> 4);
-+    uint32_t requiredAction = 0;
-+
-+    if (glblMask & 0x000f)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("icIndxMask has to be with last nibble 0"));
-+
-+    while (countMask)
-+    {
-+        countOnes++;
-+        countMask = (uint16_t)(countMask >> 1);
-+    }
-+
-+    if (!POWER_OF_2(p_CcNode->numOfKeys))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("For Node of the type INDEXED numOfKeys has to be powerOfTwo"));
-+
-+    if (p_CcNode->numOfKeys != ((uint32_t)1 << countOnes))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("For Node of the type IC_HASH_INDEXED numOfKeys has to be powerOfTwo"));
-+
-+    if (p_CcNodeParam->keysParams.maxNumOfKeys
-+            && (p_CcNodeParam->keysParams.maxNumOfKeys != p_CcNode->numOfKeys))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("For Node of the type INDEXED 'maxNumOfKeys' should be 0 or equal 'numOfKeys'"));
-+
-+    /* Validate statistics parameters */
-+    err = ValidateAndCalcStatsParams(p_CcNode, p_CcNodeParam,
-+                                     &(p_CcNode->numOfStatsFLRs),
-+                                     &(p_CcNode->countersArraySize));
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, ("Invalid statistics parameters"));
-+
-+    err = ValidateNextEngineParams(
-+            h_FmPcd, &p_CcNodeParam->keysParams.ccNextEngineParamsForMiss,
-+            p_CcNode->statisticsMode);
-+    if (GET_ERROR_TYPE(err) != E_NOT_SUPPORTED)
-+        RETURN_ERROR(
-+                MAJOR,
-+                err,
-+                ("MissNextEngineParams for the node of the type IC_INDEX_HASH has to be UnInitialized"));
-+
-+    for (tmp = 0; tmp < p_CcNode->numOfKeys; tmp++)
-+    {
-+        p_KeyParams = &p_CcNodeParam->keysParams.keyParams[tmp];
-+
-+        if (p_KeyParams->p_Mask || p_KeyParams->p_Key)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("For Node of the type IC_HASH_INDEXED p_Key or p_Mask has to be NULL"));
-+
-+        if ((glblMask & (tmp * 16)) == (tmp * 16))
-+        {
-+            err = ValidateNextEngineParams(h_FmPcd,
-+                                           &p_KeyParams->ccNextEngineParams,
-+                                           p_CcNode->statisticsMode);
-+            if (err)
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        err,
-+                        ("This index has to be initialized for the node of the type IC_INDEX_HASH according to settings of GlobalMask "));
-+
-+            if (p_KeyParams->ccNextEngineParams.h_Manip)
-+            {
-+                err = FmPcdManipCheckParamsForCcNextEngine(
-+                        &p_KeyParams->ccNextEngineParams, &requiredAction);
-+                if (err)
-+                    RETURN_ERROR(MAJOR, err, (NO_MSG));
-+                p_CcNode->keyAndNextEngineParams[tmp].requiredAction =
-+                        requiredAction;
-+            }
-+
-+            memcpy(&p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams,
-+                   &p_KeyParams->ccNextEngineParams,
-+                   sizeof(t_FmPcdCcNextEngineParams));
-+
-+            if ((p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams.nextEngine
-+                    == e_FM_PCD_CC)
-+                    && p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams.h_Manip)
-+            {
-+                err =
-+                        AllocAndFillAdForContLookupManip(
-+                                p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams.params.ccParams.h_CcNode);
-+                if (err)
-+                    RETURN_ERROR(MAJOR, err, (NO_MSG));
-+            }
-+        }
-+        else
-+        {
-+            err = ValidateNextEngineParams(h_FmPcd,
-+                                           &p_KeyParams->ccNextEngineParams,
-+                                           p_CcNode->statisticsMode);
-+            if (GET_ERROR_TYPE(err) != E_NOT_SUPPORTED)
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        err,
-+                        ("This index has to be UnInitialized for the node of the type IC_INDEX_HASH according to settings of GlobalMask"));
-+        }
-+    }
-+
-+    *isKeyTblAlloc = FALSE;
-+    cpu_to_be16s(&glblMask);
-+    memcpy(PTR_MOVE(p_CcNode->p_GlblMask, 2), &glblMask, 2);
-+
-+    return E_OK;
-+}
-+
-+static t_Error ModifyNextEngineParamNode(
-+        t_Handle h_FmPcd, t_Handle h_FmPcdCcNode, uint16_t keyIndex,
-+        t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_FmPcdCcNode;
-+    t_FmPcd *p_FmPcd;
-+    t_List h_OldPointersLst, h_NewPointersLst;
-+    t_FmPcdModifyCcKeyAdditionalParams *p_ModifyKeyParams;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcd, E_INVALID_VALUE);
-+    SANITY_CHECK_RETURN_ERROR(p_CcNode, E_INVALID_HANDLE);
-+
-+    if (keyIndex >= p_CcNode->numOfKeys)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                     ("keyIndex > previously cleared last index + 1"));
-+
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+
-+    INIT_LIST(&h_OldPointersLst);
-+    INIT_LIST(&h_NewPointersLst);
-+
-+    p_ModifyKeyParams = ModifyNodeCommonPart(p_CcNode, keyIndex,
-+                                             e_MODIFY_STATE_CHANGE, FALSE,
-+                                             FALSE, FALSE);
-+    if (!p_ModifyKeyParams)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+
-+    if (p_CcNode->maxNumOfKeys
-+            && !TRY_LOCK(p_FmPcd->h_ShadowSpinlock, &p_FmPcd->shadowLock))
-+    {
-+        XX_Free(p_ModifyKeyParams);
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = BuildNewNodeModifyNextEngine(h_FmPcd, p_CcNode, keyIndex,
-+                                       p_FmPcdCcNextEngineParams,
-+                                       &h_OldPointersLst, &h_NewPointersLst,
-+                                       p_ModifyKeyParams);
-+    if (err)
-+    {
-+        XX_Free(p_ModifyKeyParams);
-+        if (p_CcNode->maxNumOfKeys)
-+            RELEASE_LOCK(p_FmPcd->shadowLock);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    err = DoDynamicChange(p_FmPcd, &h_OldPointersLst, &h_NewPointersLst,
-+                          p_ModifyKeyParams, FALSE);
-+
-+    if (p_CcNode->maxNumOfKeys)
-+        RELEASE_LOCK(p_FmPcd->shadowLock);
-+
-+	ReleaseLst(&h_OldPointersLst);
-+	ReleaseLst(&h_NewPointersLst);
-+
-+    return err;
-+}
-+
-+static t_Error FindKeyIndex(t_Handle h_CcNode, uint8_t keySize, uint8_t *p_Key,
-+                            uint8_t *p_Mask, uint16_t *p_KeyIndex)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    uint8_t tmpMask[FM_PCD_MAX_SIZE_OF_KEY];
-+    uint16_t i;
-+
-+    ASSERT_COND(p_Key);
-+    ASSERT_COND(p_KeyIndex);
-+    ASSERT_COND(keySize < FM_PCD_MAX_SIZE_OF_KEY);
-+
-+    if (keySize != p_CcNode->userSizeOfExtraction)
-+        RETURN_ERROR(
-+                MINOR, E_INVALID_VALUE,
-+                ("Key size doesn't match the extraction size of the node"));
-+
-+    /* If user didn't pass a mask for this key, we'll look for full extraction mask */
-+    if (!p_Mask)
-+        memset(tmpMask, 0xFF, keySize);
-+
-+    for (i = 0; i < p_CcNode->numOfKeys; i++)
-+    {
-+        /* Comparing received key */
-+        if (memcmp(p_Key, p_CcNode->keyAndNextEngineParams[i].key, keySize)
-+                == 0)
-+        {
-+            if (p_Mask)
-+            {
-+                /* If a user passed a mask for this key, it must match to the existing key's mask for a correct match */
-+                if (memcmp(p_Mask, p_CcNode->keyAndNextEngineParams[i].mask,
-+                           keySize) == 0)
-+                {
-+                    *p_KeyIndex = i;
-+                    return E_OK;
-+                }
-+            }
-+            else
-+            {
-+                /* If user didn't pass a mask for this key, check if the existing key mask is full extraction */
-+                if (memcmp(tmpMask, p_CcNode->keyAndNextEngineParams[i].mask,
-+                           keySize) == 0)
-+                {
-+                    *p_KeyIndex = i;
-+                    return E_OK;
-+                }
-+            }
-+        }
-+    }
-+
-+    return ERROR_CODE(E_NOT_FOUND);
-+}
-+
-+static t_Error CalcAndUpdateCcShadow(t_FmPcdCcNode *p_CcNode,
-+                                     bool isKeyTblAlloc,
-+                                     uint32_t *p_MatchTableSize,
-+                                     uint32_t *p_AdTableSize)
-+{
-+    uint32_t shadowSize;
-+    t_Error err;
-+
-+    /* Calculate keys table maximal size - each entry consists of a key and a mask,
-+     (if local mask support is requested) */
-+    *p_MatchTableSize = p_CcNode->ccKeySizeAccExtraction * sizeof(uint8_t)
-+            * p_CcNode->maxNumOfKeys;
-+
-+    if (p_CcNode->maskSupport)
-+        *p_MatchTableSize *= 2;
-+
-+    /* Calculate next action descriptors table, including one more entry for miss */
-+    *p_AdTableSize = (uint32_t)((p_CcNode->maxNumOfKeys + 1)
-+            * FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    /* Calculate maximal shadow size of this node.
-+     All shadow structures will be used for runtime modifications host command. If
-+     keys table was allocated for this node, the keys table and next engines table may
-+     be modified in run time (entries added or removed), so shadow tables are requires.
-+     Otherwise, the only supported runtime modification is a specific next engine update
-+     and this requires shadow memory of a single AD */
-+
-+    /* Shadow size should be enough to hold the following 3 structures:
-+     * 1 - an action descriptor */
-+    shadowSize = FM_PCD_CC_AD_ENTRY_SIZE;
-+
-+    /* 2 - keys match table, if was allocated for the current node */
-+    if (isKeyTblAlloc)
-+        shadowSize += *p_MatchTableSize;
-+
-+    /* 3 - next action descriptors table */
-+    shadowSize += *p_AdTableSize;
-+
-+    /* Update shadow to the calculated size */
-+    err = FmPcdUpdateCcShadow(p_CcNode->h_FmPcd, (uint32_t)shadowSize,
-+                              FM_PCD_CC_AD_TABLE_ALIGN);
-+    if (err != E_OK)
-+    {
-+        DeleteNode(p_CcNode);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MURAM allocation for CC node shadow"));
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error AllocStatsObjs(t_FmPcdCcNode *p_CcNode)
-+{
-+    t_FmPcdStatsObj *p_StatsObj;
-+    t_Handle h_FmMuram, h_StatsAd, h_StatsCounters;
-+    uint32_t i;
-+
-+    h_FmMuram = FmPcdGetMuramHandle(p_CcNode->h_FmPcd);
-+    if (!h_FmMuram)
-+        RETURN_ERROR(MAJOR, E_INVALID_HANDLE, ("FM MURAM"));
-+
-+    /* Allocate statistics ADs and statistics counter. An extra pair (AD + counters)
-+     will be allocated to support runtime modifications */
-+    for (i = 0; i < p_CcNode->maxNumOfKeys + 2; i++)
-+    {
-+        /* Allocate list object structure */
-+        p_StatsObj = XX_Malloc(sizeof(t_FmPcdStatsObj));
-+        if (!p_StatsObj)
-+        {
-+            FreeStatObjects(&p_CcNode->availableStatsLst, h_FmMuram);
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Statistics object"));
-+        }
-+        memset(p_StatsObj, 0, sizeof(t_FmPcdStatsObj));
-+
-+        /* Allocate statistics AD from MURAM */
-+        h_StatsAd = (t_Handle)FM_MURAM_AllocMem(h_FmMuram,
-+                                                FM_PCD_CC_AD_ENTRY_SIZE,
-+                                                FM_PCD_CC_AD_TABLE_ALIGN);
-+        if (!h_StatsAd)
-+        {
-+            FreeStatObjects(&p_CcNode->availableStatsLst, h_FmMuram);
-+            XX_Free(p_StatsObj);
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                         ("MURAM allocation for statistics ADs"));
-+        }
-+        MemSet8(h_StatsAd, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+        /* Allocate statistics counters from MURAM */
-+        h_StatsCounters = (t_Handle)FM_MURAM_AllocMem(
-+                h_FmMuram, p_CcNode->countersArraySize,
-+                FM_PCD_CC_AD_TABLE_ALIGN);
-+        if (!h_StatsCounters)
-+        {
-+            FreeStatObjects(&p_CcNode->availableStatsLst, h_FmMuram);
-+            FM_MURAM_FreeMem(h_FmMuram, h_StatsAd);
-+            XX_Free(p_StatsObj);
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                         ("MURAM allocation for statistics counters"));
-+        }
-+        MemSet8(h_StatsCounters, 0, p_CcNode->countersArraySize);
-+
-+        p_StatsObj->h_StatsAd = h_StatsAd;
-+        p_StatsObj->h_StatsCounters = h_StatsCounters;
-+
-+        EnqueueStatsObj(&p_CcNode->availableStatsLst, p_StatsObj);
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error MatchTableGetKeyStatistics(
-+        t_FmPcdCcNode *p_CcNode, uint16_t keyIndex,
-+        t_FmPcdCcKeyStatistics *p_KeyStatistics)
-+{
-+    uint32_t *p_StatsCounters, i;
-+
-+    if (p_CcNode->statisticsMode == e_FM_PCD_CC_STATS_MODE_NONE)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                     ("Statistics were not enabled for this match table"));
-+
-+    if (!p_CcNode->keyAndNextEngineParams[keyIndex].p_StatsObj)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                     ("Statistics were not enabled for this key"));
-+
-+    memset(p_KeyStatistics, 0, sizeof(t_FmPcdCcKeyStatistics));
-+
-+    p_StatsCounters =
-+            p_CcNode->keyAndNextEngineParams[keyIndex].p_StatsObj->h_StatsCounters;
-+    ASSERT_COND(p_StatsCounters);
-+
-+    p_KeyStatistics->byteCount = GET_UINT32(*p_StatsCounters);
-+
-+    for (i = 1; i <= p_CcNode->numOfStatsFLRs; i++)
-+    {
-+        p_StatsCounters =
-+                PTR_MOVE(p_StatsCounters, FM_PCD_CC_STATS_COUNTER_SIZE);
-+
-+        p_KeyStatistics->frameCount += GET_UINT32(*p_StatsCounters);
-+
-+#if (DPAA_VERSION >= 11)
-+        p_KeyStatistics->frameLengthRangeCount[i - 1] =
-+                GET_UINT32(*p_StatsCounters);
-+#endif /* (DPAA_VERSION >= 11) */
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error MatchTableSet(t_Handle h_FmPcd, t_FmPcdCcNode *p_CcNode,
-+                             t_FmPcdCcNodeParams *p_CcNodeParam)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    t_FmPcdCcNode *p_FmPcdCcNextNode;
-+    t_Error err = E_OK;
-+    uint32_t tmp, keySize;
-+    bool glblMask = FALSE;
-+    t_FmPcdCcKeyParams *p_KeyParams;
-+    t_Handle h_FmMuram, p_KeysMatchTblTmp, p_AdTableTmp;
-+#if (DPAA_VERSION >= 11)
-+    t_Handle h_StatsFLRs;
-+#endif /* (DPAA_VERSION >= 11) */
-+    bool fullField = FALSE;
-+    ccPrivateInfo_t icCode = CC_PRIVATE_INFO_NONE;
-+    bool isKeyTblAlloc, fromIc = FALSE;
-+    uint32_t matchTableSize, adTableSize;
-+    t_CcNodeInformation ccNodeInfo, *p_CcInformation;
-+    t_FmPcdStatsObj *p_StatsObj;
-+    t_FmPcdCcStatsParams statsParams = { 0 };
-+    t_Handle h_Manip;
-+
-+    ASSERT_COND(h_FmPcd);
-+    ASSERT_COND(p_CcNode);
-+    ASSERT_COND(p_CcNodeParam);
-+
-+    p_CcNode->p_GlblMask = (t_Handle)XX_Malloc(
-+            CC_GLBL_MASK_SIZE * sizeof(uint8_t));
-+    memset(p_CcNode->p_GlblMask, 0, CC_GLBL_MASK_SIZE * sizeof(uint8_t));
-+
-+    p_CcNode->h_FmPcd = h_FmPcd;
-+    p_CcNode->numOfKeys = p_CcNodeParam->keysParams.numOfKeys;
-+    p_CcNode->maxNumOfKeys = p_CcNodeParam->keysParams.maxNumOfKeys;
-+    p_CcNode->maskSupport = p_CcNodeParam->keysParams.maskSupport;
-+    p_CcNode->statisticsMode = p_CcNodeParam->keysParams.statisticsMode;
-+
-+    /* For backward compatibility - even if statistics mode is nullified,
-+     we'll fix it to frame mode so we can support per-key request for
-+     statistics using 'statisticsEn' in next engine parameters */
-+    if (!p_CcNode->maxNumOfKeys
-+            && (p_CcNode->statisticsMode == e_FM_PCD_CC_STATS_MODE_NONE))
-+        p_CcNode->statisticsMode = e_FM_PCD_CC_STATS_MODE_FRAME;
-+
-+    h_FmMuram = FmPcdGetMuramHandle(h_FmPcd);
-+    if (!h_FmMuram)
-+        RETURN_ERROR(MAJOR, E_INVALID_HANDLE, ("FM MURAM"));
-+
-+    INIT_LIST(&p_CcNode->ccPrevNodesLst);
-+    INIT_LIST(&p_CcNode->ccTreeIdLst);
-+    INIT_LIST(&p_CcNode->ccTreesLst);
-+    INIT_LIST(&p_CcNode->availableStatsLst);
-+
-+    p_CcNode->h_Spinlock = XX_InitSpinlock();
-+    if (!p_CcNode->h_Spinlock)
-+    {
-+        DeleteNode(p_CcNode);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("CC node spinlock"));
-+    }
-+
-+    if ((p_CcNodeParam->extractCcParams.type == e_FM_PCD_EXTRACT_BY_HDR)
-+            && ((p_CcNodeParam->extractCcParams.extractByHdr.hdr
-+                    == HEADER_TYPE_IPv4)
-+                    || (p_CcNodeParam->extractCcParams.extractByHdr.hdr
-+                            == HEADER_TYPE_IPv6))
-+            && (p_CcNodeParam->extractCcParams.extractByHdr.type
-+                    == e_FM_PCD_EXTRACT_FULL_FIELD)
-+            && ((p_CcNodeParam->extractCcParams.extractByHdr.extractByHdrType.fullField.ipv6
-+                    == NET_HEADER_FIELD_IPv6_HOP_LIMIT)
-+                    || (p_CcNodeParam->extractCcParams.extractByHdr.extractByHdrType.fullField.ipv4
-+                            == NET_HEADER_FIELD_IPv4_TTL)))
-+    {
-+        err = Ipv4TtlOrIpv6HopLimitCheckParams(h_FmPcd, p_CcNodeParam, p_CcNode,
-+                                               &isKeyTblAlloc);
-+        glblMask = FALSE;
-+    }
-+    else
-+        if ((p_CcNodeParam->extractCcParams.type == e_FM_PCD_EXTRACT_NON_HDR)
-+                && ((p_CcNodeParam->extractCcParams.extractNonHdr.src
-+                        == e_FM_PCD_EXTRACT_FROM_KEY)
-+                        || (p_CcNodeParam->extractCcParams.extractNonHdr.src
-+                                == e_FM_PCD_EXTRACT_FROM_HASH)
-+                        || (p_CcNodeParam->extractCcParams.extractNonHdr.src
-+                                == e_FM_PCD_EXTRACT_FROM_FLOW_ID)))
-+        {
-+            if ((p_CcNodeParam->extractCcParams.extractNonHdr.src
-+                    == e_FM_PCD_EXTRACT_FROM_FLOW_ID)
-+                    && (p_CcNodeParam->extractCcParams.extractNonHdr.offset != 0))
-+            {
-+                DeleteNode(p_CcNode);
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_INVALID_VALUE,
-+                        ("In the case of the extraction from e_FM_PCD_EXTRACT_FROM_FLOW_ID offset has to be 0"));
-+            }
-+
-+            icCode = IcDefineCode(p_CcNodeParam);
-+            fromIc = TRUE;
-+            if (icCode == CC_PRIVATE_INFO_NONE)
-+            {
-+                DeleteNode(p_CcNode);
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_INVALID_STATE,
-+                        ("user asked extraction from IC and field in internal context or action wasn't initialized in the right way"));
-+            }
-+
-+            if ((icCode == CC_PRIVATE_INFO_IC_DEQ_FQID_INDEX_LOOKUP)
-+                    || (icCode == CC_PRIVATE_INFO_IC_HASH_INDEX_LOOKUP))
-+            {
-+                err = IcHashIndexedCheckParams(h_FmPcd, p_CcNodeParam, p_CcNode,
-+                                               &isKeyTblAlloc);
-+                glblMask = TRUE;
-+            }
-+            else
-+            {
-+                err = CheckParams(h_FmPcd, p_CcNodeParam, p_CcNode,
-+                                  &isKeyTblAlloc);
-+                if (p_CcNode->glblMaskSize)
-+                    glblMask = TRUE;
-+            }
-+        }
-+        else
-+        {
-+            err = CheckParams(h_FmPcd, p_CcNodeParam, p_CcNode, &isKeyTblAlloc);
-+            if (p_CcNode->glblMaskSize)
-+                glblMask = TRUE;
-+        }
-+
-+    if (err)
-+    {
-+        DeleteNode(p_CcNode);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    switch (p_CcNodeParam->extractCcParams.type)
-+    {
-+        case (e_FM_PCD_EXTRACT_BY_HDR):
-+            switch (p_CcNodeParam->extractCcParams.extractByHdr.type)
-+            {
-+                case (e_FM_PCD_EXTRACT_FULL_FIELD):
-+                    p_CcNode->parseCode =
-+                            GetFullFieldParseCode(
-+                                    p_CcNodeParam->extractCcParams.extractByHdr.hdr,
-+                                    p_CcNodeParam->extractCcParams.extractByHdr.hdrIndex,
-+                                    p_CcNodeParam->extractCcParams.extractByHdr.extractByHdrType.fullField);
-+                    GetSizeHeaderField(
-+                            p_CcNodeParam->extractCcParams.extractByHdr.hdr,
-+                            p_CcNodeParam->extractCcParams.extractByHdr.extractByHdrType.fullField,
-+                            &p_CcNode->sizeOfExtraction);
-+                    fullField = TRUE;
-+                    if ((p_CcNode->parseCode != CC_PC_FF_TCI1)
-+                            && (p_CcNode->parseCode != CC_PC_FF_TCI2)
-+                            && (p_CcNode->parseCode != CC_PC_FF_MPLS1)
-+                            && (p_CcNode->parseCode != CC_PC_FF_MPLS_LAST)
-+                            && (p_CcNode->parseCode != CC_PC_FF_IPV4IPTOS_TC1)
-+                            && (p_CcNode->parseCode != CC_PC_FF_IPV4IPTOS_TC2)
-+                            && (p_CcNode->parseCode
-+                                    != CC_PC_FF_IPTOS_IPV6TC1_IPV6FLOW1)
-+                            && (p_CcNode->parseCode != CC_PC_FF_IPDSCP)
-+                            && (p_CcNode->parseCode
-+                                    != CC_PC_FF_IPTOS_IPV6TC2_IPV6FLOW2)
-+                            && glblMask)
-+                    {
-+                        glblMask = FALSE;
-+                        p_CcNode->glblMaskSize = 4;
-+                        p_CcNode->lclMask = TRUE;
-+                    }
-+                    break;
-+
-+                case (e_FM_PCD_EXTRACT_FROM_HDR):
-+                    p_CcNode->sizeOfExtraction =
-+                            p_CcNodeParam->extractCcParams.extractByHdr.extractByHdrType.fromHdr.size;
-+                    p_CcNode->offset =
-+                            p_CcNodeParam->extractCcParams.extractByHdr.extractByHdrType.fromHdr.offset;
-+                    p_CcNode->userOffset =
-+                            p_CcNodeParam->extractCcParams.extractByHdr.extractByHdrType.fromHdr.offset;
-+                    p_CcNode->parseCode =
-+                            GetPrParseCode(
-+                                    p_CcNodeParam->extractCcParams.extractByHdr.hdr,
-+                                    p_CcNodeParam->extractCcParams.extractByHdr.hdrIndex,
-+                                    p_CcNode->offset, glblMask,
-+                                    &p_CcNode->prsArrayOffset);
-+                    break;
-+
-+                case (e_FM_PCD_EXTRACT_FROM_FIELD):
-+                    p_CcNode->offset =
-+                            p_CcNodeParam->extractCcParams.extractByHdr.extractByHdrType.fromField.offset;
-+                    p_CcNode->userOffset =
-+                            p_CcNodeParam->extractCcParams.extractByHdr.extractByHdrType.fromField.offset;
-+                    p_CcNode->sizeOfExtraction =
-+                            p_CcNodeParam->extractCcParams.extractByHdr.extractByHdrType.fromField.size;
-+                    p_CcNode->parseCode =
-+                            GetFieldParseCode(
-+                                    p_CcNodeParam->extractCcParams.extractByHdr.hdr,
-+                                    p_CcNodeParam->extractCcParams.extractByHdr.extractByHdrType.fromField.field,
-+                                    p_CcNode->offset,
-+                                    &p_CcNode->prsArrayOffset,
-+                                    p_CcNodeParam->extractCcParams.extractByHdr.hdrIndex);
-+                    break;
-+
-+                default:
-+                    DeleteNode(p_CcNode);
-+                    RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+            }
-+            break;
-+
-+        case (e_FM_PCD_EXTRACT_NON_HDR):
-+            /* get the field code for the generic extract */
-+            p_CcNode->sizeOfExtraction =
-+                    p_CcNodeParam->extractCcParams.extractNonHdr.size;
-+            p_CcNode->offset =
-+                    p_CcNodeParam->extractCcParams.extractNonHdr.offset;
-+            p_CcNode->userOffset =
-+                    p_CcNodeParam->extractCcParams.extractNonHdr.offset;
-+            p_CcNode->parseCode = GetGenParseCode(
-+                    p_CcNodeParam->extractCcParams.extractNonHdr.src,
-+                    p_CcNode->offset, glblMask, &p_CcNode->prsArrayOffset,
-+                    fromIc, icCode);
-+
-+            if (p_CcNode->parseCode == CC_PC_GENERIC_IC_HASH_INDEXED)
-+            {
-+                if ((p_CcNode->offset + p_CcNode->sizeOfExtraction) > 8)
-+                {
-+                    DeleteNode(p_CcNode);
-+                    RETURN_ERROR(
-+                            MAJOR,
-+                            E_INVALID_SELECTION,
-+                            ("when node of the type CC_PC_GENERIC_IC_HASH_INDEXED offset + size can not be bigger then size of HASH 64 bits (8 bytes)"));
-+                }
-+            }
-+            if ((p_CcNode->parseCode == CC_PC_GENERIC_IC_GMASK)
-+                    || (p_CcNode->parseCode == CC_PC_GENERIC_IC_HASH_INDEXED))
-+            {
-+                p_CcNode->offset += p_CcNode->prsArrayOffset;
-+                p_CcNode->prsArrayOffset = 0;
-+            }
-+            break;
-+
-+        default:
-+            DeleteNode(p_CcNode);
-+            RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+    }
-+
-+    if (p_CcNode->parseCode == CC_PC_ILLEGAL)
-+    {
-+        DeleteNode(p_CcNode);
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("illegal extraction type"));
-+    }
-+
-+    if ((p_CcNode->sizeOfExtraction > FM_PCD_MAX_SIZE_OF_KEY)
-+            || !p_CcNode->sizeOfExtraction)
-+    {
-+        DeleteNode(p_CcNode);
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("sizeOfExatrction can not be greater than 56 and not 0"));
-+    }
-+
-+    if (p_CcNodeParam->keysParams.keySize != p_CcNode->sizeOfExtraction)
-+    {
-+        DeleteNode(p_CcNode);
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("keySize has to be equal to sizeOfExtraction"));
-+    }
-+
-+    p_CcNode->userSizeOfExtraction = p_CcNode->sizeOfExtraction;
-+
-+    if (!glblMask)
-+        memset(p_CcNode->p_GlblMask, 0xff, CC_GLBL_MASK_SIZE * sizeof(uint8_t));
-+
-+    err = CheckAndSetManipParamsWithCcNodeParams(p_CcNode);
-+    if (err != E_OK)
-+    {
-+        DeleteNode(p_CcNode);
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("keySize has to be equal to sizeOfExtraction"));
-+    }
-+
-+    /* Calculating matching table entry size by rounding up the user-defined size of extraction to valid entry size */
-+    GetCcExtractKeySize(p_CcNode->sizeOfExtraction,
-+                        &p_CcNode->ccKeySizeAccExtraction);
-+
-+    /* If local mask is used, it is stored next to each key in the keys match table */
-+    if (p_CcNode->lclMask)
-+        keySize = (uint32_t)(2 * p_CcNode->ccKeySizeAccExtraction);
-+    else
-+        keySize = p_CcNode->ccKeySizeAccExtraction;
-+
-+    /* Update CC shadow with maximal size required by this node */
-+    if (p_CcNode->maxNumOfKeys)
-+    {
-+        err = CalcAndUpdateCcShadow(p_CcNode, isKeyTblAlloc, &matchTableSize,
-+                                    &adTableSize);
-+        if (err != E_OK)
-+        {
-+            DeleteNode(p_CcNode);
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        }
-+
-+        p_CcNode->keysMatchTableMaxSize = matchTableSize;
-+
-+        if (p_CcNode->statisticsMode != e_FM_PCD_CC_STATS_MODE_NONE)
-+        {
-+            err = AllocStatsObjs(p_CcNode);
-+            if (err != E_OK)
-+            {
-+                DeleteNode(p_CcNode);
-+                RETURN_ERROR(MAJOR, err, NO_MSG);
-+            }
-+        }
-+
-+        /* If manipulation will be initialized before this node, it will use the table
-+         descriptor in the AD table of previous node and this node will need an extra
-+         AD as his table descriptor. */
-+        p_CcNode->h_TmpAd = (t_Handle)FM_MURAM_AllocMem(
-+                h_FmMuram, FM_PCD_CC_AD_ENTRY_SIZE, FM_PCD_CC_AD_TABLE_ALIGN);
-+        if (!p_CcNode->h_TmpAd)
-+        {
-+            DeleteNode(p_CcNode);
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                         ("MURAM allocation for CC action descriptor"));
-+        }
-+    }
-+    else
-+    {
-+        matchTableSize = (uint32_t)(keySize * sizeof(uint8_t)
-+                * (p_CcNode->numOfKeys + 1));
-+        adTableSize = (uint32_t)(FM_PCD_CC_AD_ENTRY_SIZE
-+                * (p_CcNode->numOfKeys + 1));
-+    }
-+
-+#if (DPAA_VERSION >= 11)
-+    switch (p_CcNode->statisticsMode)
-+    {
-+
-+        case e_FM_PCD_CC_STATS_MODE_RMON:
-+            /* If RMON statistics or RMON conditional statistics modes are requested,
-+             allocate frame length ranges array */
-+            p_CcNode->h_StatsFLRs = FM_MURAM_AllocMem(
-+                    h_FmMuram,
-+                    (uint32_t)(p_CcNode->numOfStatsFLRs)
-+                            * FM_PCD_CC_STATS_FLR_SIZE,
-+                    FM_PCD_CC_AD_TABLE_ALIGN);
-+
-+            if (!p_CcNode->h_StatsFLRs)
-+            {
-+                DeleteNode(p_CcNode);
-+                RETURN_ERROR(
-+                        MAJOR, E_NO_MEMORY,
-+                        ("MURAM allocation for CC frame length ranges array"));
-+            }
-+
-+            /* Initialize using value received from the user */
-+            for (tmp = 0; tmp < p_CcNode->numOfStatsFLRs; tmp++)
-+            {
-+                uint16_t flr =
-+                         cpu_to_be16(p_CcNodeParam->keysParams.frameLengthRanges[tmp]);
-+
-+                h_StatsFLRs =
-+                        PTR_MOVE(p_CcNode->h_StatsFLRs, tmp * FM_PCD_CC_STATS_FLR_SIZE);
-+
-+                MemCpy8(h_StatsFLRs,
-+                            &flr,
-+                            FM_PCD_CC_STATS_FLR_SIZE);
-+            }
-+            break;
-+
-+        default:
-+            break;
-+    }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    /* Allocate keys match table. Not required for some CC nodes, for example for IPv4 TTL
-+     identification, IPv6 hop count identification, etc. */
-+    if (isKeyTblAlloc)
-+    {
-+        p_CcNode->h_KeysMatchTable = (t_Handle)FM_MURAM_AllocMem(
-+                h_FmMuram, matchTableSize, FM_PCD_CC_KEYS_MATCH_TABLE_ALIGN);
-+        if (!p_CcNode->h_KeysMatchTable)
-+        {
-+            DeleteNode(p_CcNode);
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                         ("MURAM allocation for CC node key match table"));
-+        }
-+        MemSet8((uint8_t *)p_CcNode->h_KeysMatchTable, 0, matchTableSize);
-+    }
-+
-+    /* Allocate action descriptors table */
-+    p_CcNode->h_AdTable = (t_Handle)FM_MURAM_AllocMem(h_FmMuram, adTableSize,
-+                                                      FM_PCD_CC_AD_TABLE_ALIGN);
-+    if (!p_CcNode->h_AdTable)
-+    {
-+        DeleteNode(p_CcNode);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                     ("MURAM allocation for CC node action descriptors table"));
-+    }
-+    MemSet8((uint8_t *)p_CcNode->h_AdTable, 0, adTableSize);
-+
-+    p_KeysMatchTblTmp = p_CcNode->h_KeysMatchTable;
-+    p_AdTableTmp = p_CcNode->h_AdTable;
-+
-+    /* For each key, create the key and the next step AD */
-+    for (tmp = 0; tmp < p_CcNode->numOfKeys; tmp++)
-+    {
-+        p_KeyParams = &p_CcNodeParam->keysParams.keyParams[tmp];
-+
-+        if (p_KeysMatchTblTmp)
-+        {
-+            /* Copy the key */
-+            MemCpy8((void*)p_KeysMatchTblTmp, p_KeyParams->p_Key,
-+                        p_CcNode->sizeOfExtraction);
-+
-+            /* Copy the key mask or initialize it to 0xFF..F */
-+            if (p_CcNode->lclMask && p_KeyParams->p_Mask)
-+            {
-+                MemCpy8(PTR_MOVE(p_KeysMatchTblTmp,
-+                        p_CcNode->ccKeySizeAccExtraction), /* User's size of extraction rounded up to a valid matching table entry size */
-+                            p_KeyParams->p_Mask, p_CcNode->sizeOfExtraction); /* Exact size of extraction as received from the user */
-+            }
-+            else
-+                if (p_CcNode->lclMask)
-+                {
-+                    MemSet8(PTR_MOVE(p_KeysMatchTblTmp,
-+                            p_CcNode->ccKeySizeAccExtraction), /* User's size of extraction rounded up to a valid matching table entry size */
-+                               0xff, p_CcNode->sizeOfExtraction); /* Exact size of extraction as received from the user */
-+                }
-+
-+            p_KeysMatchTblTmp =
-+                    PTR_MOVE(p_KeysMatchTblTmp, keySize * sizeof(uint8_t));
-+        }
-+
-+        /* Create the next action descriptor in the match table */
-+        if (p_KeyParams->ccNextEngineParams.statisticsEn)
-+        {
-+            p_StatsObj = GetStatsObj(p_CcNode);
-+            ASSERT_COND(p_StatsObj);
-+
-+            statsParams.h_StatsAd = p_StatsObj->h_StatsAd;
-+            statsParams.h_StatsCounters = p_StatsObj->h_StatsCounters;
-+#if (DPAA_VERSION >= 11)
-+            statsParams.h_StatsFLRs = p_CcNode->h_StatsFLRs;
-+
-+#endif /* (DPAA_VERSION >= 11) */
-+            NextStepAd(p_AdTableTmp, &statsParams,
-+                       &p_KeyParams->ccNextEngineParams, p_FmPcd);
-+
-+            p_CcNode->keyAndNextEngineParams[tmp].p_StatsObj = p_StatsObj;
-+        }
-+        else
-+        {
-+            NextStepAd(p_AdTableTmp, NULL, &p_KeyParams->ccNextEngineParams,
-+                       p_FmPcd);
-+
-+            p_CcNode->keyAndNextEngineParams[tmp].p_StatsObj = NULL;
-+        }
-+
-+        p_AdTableTmp = PTR_MOVE(p_AdTableTmp, FM_PCD_CC_AD_ENTRY_SIZE);
-+    }
-+
-+    /* Update next engine for the 'miss' entry */
-+    if (p_CcNodeParam->keysParams.ccNextEngineParamsForMiss.statisticsEn)
-+    {
-+        p_StatsObj = GetStatsObj(p_CcNode);
-+        ASSERT_COND(p_StatsObj);
-+
-+        /* All 'bucket' nodes of a hash table should share the same statistics counters,
-+         allocated by the hash table. So, if this node is a bucket of a hash table,
-+         we'll replace the locally allocated counters with the shared counters. */
-+        if (p_CcNode->isHashBucket)
-+        {
-+            ASSERT_COND(p_CcNode->h_MissStatsCounters);
-+
-+            /* Store original counters pointer and replace it with mutual preallocated pointer */
-+            p_CcNode->h_PrivMissStatsCounters = p_StatsObj->h_StatsCounters;
-+            p_StatsObj->h_StatsCounters = p_CcNode->h_MissStatsCounters;
-+        }
-+
-+        statsParams.h_StatsAd = p_StatsObj->h_StatsAd;
-+        statsParams.h_StatsCounters = p_StatsObj->h_StatsCounters;
-+#if (DPAA_VERSION >= 11)
-+        statsParams.h_StatsFLRs = p_CcNode->h_StatsFLRs;
-+
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+        NextStepAd(p_AdTableTmp, &statsParams,
-+                   &p_CcNodeParam->keysParams.ccNextEngineParamsForMiss,
-+                   p_FmPcd);
-+
-+        p_CcNode->keyAndNextEngineParams[tmp].p_StatsObj = p_StatsObj;
-+    }
-+    else
-+    {
-+        NextStepAd(p_AdTableTmp, NULL,
-+                   &p_CcNodeParam->keysParams.ccNextEngineParamsForMiss,
-+                   p_FmPcd);
-+
-+        p_CcNode->keyAndNextEngineParams[tmp].p_StatsObj = NULL;
-+    }
-+
-+    /* This parameter will be used to initialize the "key length" field in the action descriptor
-+     that points to this node and it should be 0 for full field extraction */
-+    if (fullField == TRUE)
-+        p_CcNode->sizeOfExtraction = 0;
-+
-+    for (tmp = 0; tmp < MIN(p_CcNode->numOfKeys + 1, CC_MAX_NUM_OF_KEYS); tmp++)
-+    {
-+        if (p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams.nextEngine
-+                == e_FM_PCD_CC)
-+        {
-+            p_FmPcdCcNextNode =
-+                    (t_FmPcdCcNode*)p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams.params.ccParams.h_CcNode;
-+            p_CcInformation = FindNodeInfoInReleventLst(
-+                    &p_FmPcdCcNextNode->ccPrevNodesLst, (t_Handle)p_CcNode,
-+                    p_FmPcdCcNextNode->h_Spinlock);
-+            if (!p_CcInformation)
-+            {
-+                memset(&ccNodeInfo, 0, sizeof(t_CcNodeInformation));
-+                ccNodeInfo.h_CcNode = (t_Handle)p_CcNode;
-+                ccNodeInfo.index = 1;
-+                EnqueueNodeInfoToRelevantLst(&p_FmPcdCcNextNode->ccPrevNodesLst,
-+                                             &ccNodeInfo,
-+                                             p_FmPcdCcNextNode->h_Spinlock);
-+            }
-+            else
-+                p_CcInformation->index++;
-+
-+            if (p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams.h_Manip)
-+            {
-+                h_Manip =
-+                        p_CcNode->keyAndNextEngineParams[tmp].nextEngineParams.h_Manip;
-+                p_CcInformation = FindNodeInfoInReleventLst(
-+                        FmPcdManipGetNodeLstPointedOnThisManip(h_Manip),
-+                        (t_Handle)p_CcNode, FmPcdManipGetSpinlock(h_Manip));
-+                if (!p_CcInformation)
-+                {
-+                    memset(&ccNodeInfo, 0, sizeof(t_CcNodeInformation));
-+                    ccNodeInfo.h_CcNode = (t_Handle)p_CcNode;
-+                    ccNodeInfo.index = 1;
-+                    EnqueueNodeInfoToRelevantLst(
-+                            FmPcdManipGetNodeLstPointedOnThisManip(h_Manip),
-+                            &ccNodeInfo, FmPcdManipGetSpinlock(h_Manip));
-+                }
-+                else
-+                    p_CcInformation->index++;
-+            }
-+        }
-+    }
-+
-+    p_AdTableTmp = p_CcNode->h_AdTable;
-+
-+    if (!FmPcdLockTryLockAll(h_FmPcd))
-+    {
-+        FM_PCD_MatchTableDelete((t_Handle)p_CcNode);
-+        DBG(TRACE, ("FmPcdLockTryLockAll failed"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    /* Required action for each next engine */
-+    for (tmp = 0; tmp < MIN(p_CcNode->numOfKeys + 1, CC_MAX_NUM_OF_KEYS); tmp++)
-+    {
-+        if (p_CcNode->keyAndNextEngineParams[tmp].requiredAction)
-+        {
-+            err = SetRequiredAction(
-+                    h_FmPcd,
-+                    p_CcNode->keyAndNextEngineParams[tmp].requiredAction,
-+                    &p_CcNode->keyAndNextEngineParams[tmp], p_AdTableTmp, 1,
-+                    NULL);
-+            if (err)
-+            {
-+                FmPcdLockUnlockAll(h_FmPcd);
-+                FM_PCD_MatchTableDelete((t_Handle)p_CcNode);
-+                RETURN_ERROR(MAJOR, err, NO_MSG);
-+            }
-+            p_AdTableTmp = PTR_MOVE(p_AdTableTmp, FM_PCD_CC_AD_ENTRY_SIZE);
-+        }
-+    }
-+
-+    FmPcdLockUnlockAll(h_FmPcd);
-+
-+    return E_OK;
-+}
-+/************************** End of static functions **************************/
-+
-+/*****************************************************************************/
-+/*              Inter-module API routines                                    */
-+/*****************************************************************************/
-+
-+t_CcNodeInformation* FindNodeInfoInReleventLst(t_List *p_List, t_Handle h_Info,
-+                                               t_Handle h_Spinlock)
-+{
-+    t_CcNodeInformation *p_CcInformation;
-+    t_List *p_Pos;
-+    uint32_t intFlags;
-+
-+    intFlags = XX_LockIntrSpinlock(h_Spinlock);
-+
-+    for (p_Pos = LIST_FIRST(p_List); p_Pos != (p_List);
-+            p_Pos = LIST_NEXT(p_Pos))
-+    {
-+        p_CcInformation = CC_NODE_F_OBJECT(p_Pos);
-+
-+        ASSERT_COND(p_CcInformation->h_CcNode);
-+
-+        if (p_CcInformation->h_CcNode == h_Info)
-+        {
-+            XX_UnlockIntrSpinlock(h_Spinlock, intFlags);
-+            return p_CcInformation;
-+        }
-+    }
-+
-+    XX_UnlockIntrSpinlock(h_Spinlock, intFlags);
-+
-+    return NULL;
-+}
-+
-+void EnqueueNodeInfoToRelevantLst(t_List *p_List, t_CcNodeInformation *p_CcInfo,
-+                                  t_Handle h_Spinlock)
-+{
-+    t_CcNodeInformation *p_CcInformation;
-+    uint32_t intFlags = 0;
-+
-+    p_CcInformation = (t_CcNodeInformation *)XX_Malloc(
-+            sizeof(t_CcNodeInformation));
-+
-+    if (p_CcInformation)
-+    {
-+        memset(p_CcInformation, 0, sizeof(t_CcNodeInformation));
-+        memcpy(p_CcInformation, p_CcInfo, sizeof(t_CcNodeInformation));
-+        INIT_LIST(&p_CcInformation->node);
-+
-+        if (h_Spinlock)
-+            intFlags = XX_LockIntrSpinlock(h_Spinlock);
-+
-+        LIST_AddToTail(&p_CcInformation->node, p_List);
-+
-+        if (h_Spinlock)
-+            XX_UnlockIntrSpinlock(h_Spinlock, intFlags);
-+    }
-+    else
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("CC Node Information"));
-+}
-+
-+void DequeueNodeInfoFromRelevantLst(t_List *p_List, t_Handle h_Info,
-+                                    t_Handle h_Spinlock)
-+{
-+    t_CcNodeInformation *p_CcInformation = NULL;
-+    uint32_t intFlags = 0;
-+    t_List *p_Pos;
-+
-+    if (h_Spinlock)
-+        intFlags = XX_LockIntrSpinlock(h_Spinlock);
-+
-+    if (LIST_IsEmpty(p_List))
-+    {
-+        XX_RestoreAllIntr(intFlags);
-+        return;
-+    }
-+
-+    for (p_Pos = LIST_FIRST(p_List); p_Pos != (p_List);
-+            p_Pos = LIST_NEXT(p_Pos))
-+    {
-+        p_CcInformation = CC_NODE_F_OBJECT(p_Pos);
-+        ASSERT_COND(p_CcInformation);
-+        ASSERT_COND(p_CcInformation->h_CcNode);
-+        if (p_CcInformation->h_CcNode == h_Info)
-+            break;
-+    }
-+
-+    if (p_CcInformation)
-+    {
-+        LIST_DelAndInit(&p_CcInformation->node);
-+        XX_Free(p_CcInformation);
-+    }
-+
-+    if (h_Spinlock)
-+        XX_UnlockIntrSpinlock(h_Spinlock, intFlags);
-+}
-+
-+void NextStepAd(t_Handle h_Ad, t_FmPcdCcStatsParams *p_FmPcdCcStatsParams,
-+                t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams,
-+                t_FmPcd *p_FmPcd)
-+{
-+    switch (p_FmPcdCcNextEngineParams->nextEngine)
-+    {
-+        case (e_FM_PCD_KG):
-+        case (e_FM_PCD_PLCR):
-+        case (e_FM_PCD_DONE):
-+            /* if NIA is not CC, create a "result" type AD */
-+            FillAdOfTypeResult(h_Ad, p_FmPcdCcStatsParams, p_FmPcd,
-+                               p_FmPcdCcNextEngineParams);
-+            break;
-+#if (DPAA_VERSION >= 11)
-+        case (e_FM_PCD_FR):
-+            if (p_FmPcdCcNextEngineParams->params.frParams.h_FrmReplic)
-+            {
-+                FillAdOfTypeContLookup(
-+                        h_Ad, p_FmPcdCcStatsParams, p_FmPcd,
-+                        p_FmPcdCcNextEngineParams->params.ccParams.h_CcNode,
-+                        p_FmPcdCcNextEngineParams->h_Manip,
-+                        p_FmPcdCcNextEngineParams->params.frParams.h_FrmReplic);
-+                FrmReplicGroupUpdateOwner(
-+                        p_FmPcdCcNextEngineParams->params.frParams.h_FrmReplic,
-+                        TRUE/* add */);
-+            }
-+            break;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+        case (e_FM_PCD_CC):
-+            /* if NIA is not CC, create a TD to continue the CC lookup */
-+            FillAdOfTypeContLookup(
-+                    h_Ad, p_FmPcdCcStatsParams, p_FmPcd,
-+                    p_FmPcdCcNextEngineParams->params.ccParams.h_CcNode,
-+                    p_FmPcdCcNextEngineParams->h_Manip, NULL);
-+
-+            UpdateNodeOwner(p_FmPcdCcNextEngineParams->params.ccParams.h_CcNode,
-+                            TRUE);
-+            break;
-+
-+        default:
-+            return;
-+    }
-+}
-+
-+t_Error FmPcdCcTreeAddIPR(t_Handle h_FmPcd, t_Handle h_FmTree,
-+                          t_Handle h_NetEnv, t_Handle h_IpReassemblyManip,
-+                          bool createSchemes)
-+{
-+    t_FmPcdCcTree *p_FmPcdCcTree = (t_FmPcdCcTree *)h_FmTree;
-+    t_FmPcdCcNextEngineParams nextEngineParams;
-+    t_NetEnvParams netEnvParams;
-+    t_Handle h_Ad;
-+    bool isIpv6Present;
-+    uint8_t ipv4GroupId, ipv6GroupId;
-+    t_Error err;
-+
-+    ASSERT_COND(p_FmPcdCcTree);
-+
-+    /* this routine must be protected by the calling routine! */
-+
-+    memset(&nextEngineParams, 0, sizeof(t_FmPcdCcNextEngineParams));
-+    memset(&netEnvParams, 0, sizeof(t_NetEnvParams));
-+
-+    h_Ad = UINT_TO_PTR(p_FmPcdCcTree->ccTreeBaseAddr);
-+
-+    isIpv6Present = FmPcdManipIpReassmIsIpv6Hdr(h_IpReassemblyManip);
-+
-+    if (isIpv6Present
-+            && (p_FmPcdCcTree->numOfEntries > (FM_PCD_MAX_NUM_OF_CC_GROUPS - 2)))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("need two free entries for IPR"));
-+
-+    if (p_FmPcdCcTree->numOfEntries > (FM_PCD_MAX_NUM_OF_CC_GROUPS - 1))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("need two free entries for IPR"));
-+
-+    nextEngineParams.nextEngine = e_FM_PCD_DONE;
-+    nextEngineParams.h_Manip = h_IpReassemblyManip;
-+
-+    /* Lock tree */
-+    err = CcRootTryLock(p_FmPcdCcTree);
-+    if (err)
-+        return ERROR_CODE(E_BUSY);
-+
-+    if (p_FmPcdCcTree->h_IpReassemblyManip == h_IpReassemblyManip)
-+    {
-+        CcRootReleaseLock(p_FmPcdCcTree);
-+        return E_OK;
-+    }
-+
-+    if ((p_FmPcdCcTree->h_IpReassemblyManip)
-+            && (p_FmPcdCcTree->h_IpReassemblyManip != h_IpReassemblyManip))
-+    {
-+        CcRootReleaseLock(p_FmPcdCcTree);
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                     ("This tree was previously updated with different IPR"));
-+    }
-+
-+    /* Initialize IPR for the first time for this tree */
-+    if (isIpv6Present)
-+    {
-+        ipv6GroupId = p_FmPcdCcTree->numOfGrps++;
-+        p_FmPcdCcTree->fmPcdGroupParam[ipv6GroupId].baseGroupEntry =
-+                (FM_PCD_MAX_NUM_OF_CC_GROUPS - 2);
-+
-+        if (createSchemes)
-+        {
-+            err = FmPcdManipBuildIpReassmScheme(h_FmPcd, h_NetEnv,
-+                                                p_FmPcdCcTree,
-+                                                h_IpReassemblyManip, FALSE,
-+                                                ipv6GroupId);
-+            if (err)
-+            {
-+                p_FmPcdCcTree->numOfGrps--;
-+                CcRootReleaseLock(p_FmPcdCcTree);
-+                RETURN_ERROR(MAJOR, err, NO_MSG);
-+            }
-+        }
-+
-+        NextStepAd(
-+                PTR_MOVE(h_Ad, (FM_PCD_MAX_NUM_OF_CC_GROUPS-2) * FM_PCD_CC_AD_ENTRY_SIZE),
-+                NULL, &nextEngineParams, h_FmPcd);
-+    }
-+
-+    ipv4GroupId = p_FmPcdCcTree->numOfGrps++;
-+    p_FmPcdCcTree->fmPcdGroupParam[ipv4GroupId].totalBitsMask = 0;
-+    p_FmPcdCcTree->fmPcdGroupParam[ipv4GroupId].baseGroupEntry =
-+            (FM_PCD_MAX_NUM_OF_CC_GROUPS - 1);
-+
-+    if (createSchemes)
-+    {
-+        err = FmPcdManipBuildIpReassmScheme(h_FmPcd, h_NetEnv, p_FmPcdCcTree,
-+                                            h_IpReassemblyManip, TRUE,
-+                                            ipv4GroupId);
-+        if (err)
-+        {
-+            p_FmPcdCcTree->numOfGrps--;
-+            if (isIpv6Present)
-+            {
-+                p_FmPcdCcTree->numOfGrps--;
-+                FmPcdManipDeleteIpReassmSchemes(h_IpReassemblyManip);
-+            }
-+            CcRootReleaseLock(p_FmPcdCcTree);
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        }
-+    }
-+
-+    NextStepAd(
-+            PTR_MOVE(h_Ad, (FM_PCD_MAX_NUM_OF_CC_GROUPS-1) * FM_PCD_CC_AD_ENTRY_SIZE),
-+            NULL, &nextEngineParams, h_FmPcd);
-+
-+    p_FmPcdCcTree->h_IpReassemblyManip = h_IpReassemblyManip;
-+
-+    CcRootReleaseLock(p_FmPcdCcTree);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmPcdCcTreeAddCPR(t_Handle h_FmPcd, t_Handle h_FmTree,
-+                          t_Handle h_NetEnv, t_Handle h_ReassemblyManip,
-+                          bool createSchemes)
-+{
-+    t_FmPcdCcTree *p_FmPcdCcTree = (t_FmPcdCcTree *)h_FmTree;
-+    t_FmPcdCcNextEngineParams nextEngineParams;
-+    t_NetEnvParams netEnvParams;
-+    t_Handle h_Ad;
-+    uint8_t groupId;
-+    t_Error err;
-+
-+    ASSERT_COND(p_FmPcdCcTree);
-+
-+    /* this routine must be protected by the calling routine! */
-+    memset(&nextEngineParams, 0, sizeof(t_FmPcdCcNextEngineParams));
-+    memset(&netEnvParams, 0, sizeof(t_NetEnvParams));
-+
-+    h_Ad = UINT_TO_PTR(p_FmPcdCcTree->ccTreeBaseAddr);
-+
-+    if (p_FmPcdCcTree->numOfEntries > (FM_PCD_MAX_NUM_OF_CC_GROUPS - 1))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("need one free entries for CPR"));
-+
-+    nextEngineParams.nextEngine = e_FM_PCD_DONE;
-+    nextEngineParams.h_Manip = h_ReassemblyManip;
-+
-+    /* Lock tree */
-+    err = CcRootTryLock(p_FmPcdCcTree);
-+    if (err)
-+        return ERROR_CODE(E_BUSY);
-+
-+    if (p_FmPcdCcTree->h_CapwapReassemblyManip == h_ReassemblyManip)
-+    {
-+        CcRootReleaseLock(p_FmPcdCcTree);
-+        return E_OK;
-+    }
-+
-+    if ((p_FmPcdCcTree->h_CapwapReassemblyManip)
-+            && (p_FmPcdCcTree->h_CapwapReassemblyManip != h_ReassemblyManip))
-+    {
-+        CcRootReleaseLock(p_FmPcdCcTree);
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                     ("This tree was previously updated with different CPR"));
-+    }
-+
-+    groupId = p_FmPcdCcTree->numOfGrps++;
-+    p_FmPcdCcTree->fmPcdGroupParam[groupId].baseGroupEntry =
-+            (FM_PCD_MAX_NUM_OF_CC_GROUPS - 1);
-+
-+    if (createSchemes)
-+    {
-+        err = FmPcdManipBuildCapwapReassmScheme(h_FmPcd, h_NetEnv,
-+                                                p_FmPcdCcTree,
-+                                                h_ReassemblyManip, groupId);
-+        if (err)
-+        {
-+            p_FmPcdCcTree->numOfGrps--;
-+            CcRootReleaseLock(p_FmPcdCcTree);
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        }
-+    }
-+
-+    NextStepAd(
-+            PTR_MOVE(h_Ad, (FM_PCD_MAX_NUM_OF_CC_GROUPS-1) * FM_PCD_CC_AD_ENTRY_SIZE),
-+            NULL, &nextEngineParams, h_FmPcd);
-+
-+    p_FmPcdCcTree->h_CapwapReassemblyManip = h_ReassemblyManip;
-+
-+    CcRootReleaseLock(p_FmPcdCcTree);
-+
-+    return E_OK;
-+}
-+
-+t_Handle FmPcdCcTreeGetSavedManipParams(t_Handle h_FmTree)
-+{
-+    t_FmPcdCcTree *p_FmPcdCcTree = (t_FmPcdCcTree *)h_FmTree;
-+
-+    ASSERT_COND(p_FmPcdCcTree);
-+
-+    return p_FmPcdCcTree->h_FmPcdCcSavedManipParams;
-+}
-+
-+void FmPcdCcTreeSetSavedManipParams(t_Handle h_FmTree,
-+                                    t_Handle h_SavedManipParams)
-+{
-+    t_FmPcdCcTree *p_FmPcdCcTree = (t_FmPcdCcTree *)h_FmTree;
-+
-+    ASSERT_COND(p_FmPcdCcTree);
-+
-+    p_FmPcdCcTree->h_FmPcdCcSavedManipParams = h_SavedManipParams;
-+}
-+
-+uint8_t FmPcdCcGetParseCode(t_Handle h_CcNode)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+
-+    ASSERT_COND(p_CcNode);
-+
-+    return p_CcNode->parseCode;
-+}
-+
-+uint8_t FmPcdCcGetOffset(t_Handle h_CcNode)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+
-+    ASSERT_COND(p_CcNode);
-+
-+    return p_CcNode->offset;
-+}
-+
-+uint16_t FmPcdCcGetNumOfKeys(t_Handle h_CcNode)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+
-+    ASSERT_COND(p_CcNode);
-+
-+    return p_CcNode->numOfKeys;
-+}
-+
-+t_Error FmPcdCcModifyNextEngineParamTree(
-+        t_Handle h_FmPcd, t_Handle h_FmPcdCcTree, uint8_t grpId, uint8_t index,
-+        t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams)
-+{
-+    t_FmPcdCcTree *p_FmPcdCcTree = (t_FmPcdCcTree *)h_FmPcdCcTree;
-+    t_FmPcd *p_FmPcd;
-+    t_List h_OldPointersLst, h_NewPointersLst;
-+    uint16_t keyIndex;
-+    t_FmPcdModifyCcKeyAdditionalParams *p_ModifyKeyParams;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcdCcTree, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((grpId <= 7), E_INVALID_VALUE);
-+
-+    if (grpId >= p_FmPcdCcTree->numOfGrps)
-+        RETURN_ERROR(MAJOR, E_INVALID_HANDLE,
-+                     ("grpId you asked > numOfGroup of relevant tree"));
-+
-+    if (index >= p_FmPcdCcTree->fmPcdGroupParam[grpId].numOfEntriesInGroup)
-+        RETURN_ERROR(MAJOR, E_INVALID_HANDLE, ("index > numOfEntriesInGroup"));
-+
-+    p_FmPcd = (t_FmPcd *)h_FmPcd;
-+
-+    INIT_LIST(&h_OldPointersLst);
-+    INIT_LIST(&h_NewPointersLst);
-+
-+    keyIndex = (uint16_t)(p_FmPcdCcTree->fmPcdGroupParam[grpId].baseGroupEntry
-+            + index);
-+
-+    p_ModifyKeyParams = ModifyNodeCommonPart(p_FmPcdCcTree, keyIndex,
-+                                             e_MODIFY_STATE_CHANGE, FALSE,
-+                                             FALSE, TRUE);
-+    if (!p_ModifyKeyParams)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+
-+    p_ModifyKeyParams->tree = TRUE;
-+
-+    if (p_FmPcd->p_CcShadow
-+            && !TRY_LOCK(p_FmPcd->h_ShadowSpinlock, &p_FmPcd->shadowLock))
-+    {
-+        XX_Free(p_ModifyKeyParams);
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = BuildNewNodeModifyNextEngine(p_FmPcd, p_FmPcdCcTree, keyIndex,
-+                                       p_FmPcdCcNextEngineParams,
-+                                       &h_OldPointersLst, &h_NewPointersLst,
-+                                       p_ModifyKeyParams);
-+    if (err)
-+    {
-+        XX_Free(p_ModifyKeyParams);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    err = DoDynamicChange(p_FmPcd, &h_OldPointersLst, &h_NewPointersLst,
-+                          p_ModifyKeyParams, FALSE);
-+
-+    if (p_FmPcd->p_CcShadow)
-+        RELEASE_LOCK(p_FmPcd->shadowLock);
-+
-+	ReleaseLst(&h_OldPointersLst);
-+	ReleaseLst(&h_NewPointersLst);
-+
-+    return err;
-+
-+}
-+
-+t_Error FmPcdCcRemoveKey(t_Handle h_FmPcd, t_Handle h_FmPcdCcNode,
-+                         uint16_t keyIndex)
-+{
-+
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_FmPcdCcNode;
-+    t_FmPcd *p_FmPcd;
-+    t_FmPcdModifyCcKeyAdditionalParams *p_ModifyKeyParams;
-+    t_List h_OldPointersLst, h_NewPointersLst;
-+    bool useShadowStructs = FALSE;
-+    t_Error err = E_OK;
-+
-+    if (keyIndex >= p_CcNode->numOfKeys)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("impossible to remove key when numOfKeys <= keyIndex"));
-+
-+    if (p_CcNode->h_FmPcd != h_FmPcd)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("handler to FmPcd is different from the handle provided at node initialization time"));
-+
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+
-+    INIT_LIST(&h_OldPointersLst);
-+    INIT_LIST(&h_NewPointersLst);
-+
-+    p_ModifyKeyParams = ModifyNodeCommonPart(p_CcNode, keyIndex,
-+                                             e_MODIFY_STATE_REMOVE, TRUE, TRUE,
-+                                             FALSE);
-+    if (!p_ModifyKeyParams)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+
-+    if (p_CcNode->maxNumOfKeys)
-+    {
-+        if (!TRY_LOCK(p_FmPcd->h_ShadowSpinlock, &p_FmPcd->shadowLock))
-+        {
-+            XX_Free(p_ModifyKeyParams);
-+            return ERROR_CODE(E_BUSY);
-+        }
-+
-+        useShadowStructs = TRUE;
-+    }
-+
-+    err = BuildNewNodeRemoveKey(p_CcNode, keyIndex, p_ModifyKeyParams);
-+    if (err)
-+    {
-+        XX_Free(p_ModifyKeyParams);
-+        if (p_CcNode->maxNumOfKeys)
-+            RELEASE_LOCK(p_FmPcd->shadowLock);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    err = UpdatePtrWhichPointOnCrntMdfNode(p_CcNode, p_ModifyKeyParams,
-+                                           &h_OldPointersLst,
-+                                           &h_NewPointersLst);
-+    if (err)
-+    {
-+        ReleaseNewNodeCommonPart(p_ModifyKeyParams);
-+        XX_Free(p_ModifyKeyParams);
-+        if (p_CcNode->maxNumOfKeys)
-+            RELEASE_LOCK(p_FmPcd->shadowLock);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    err = DoDynamicChange(p_FmPcd, &h_OldPointersLst, &h_NewPointersLst,
-+                          p_ModifyKeyParams, useShadowStructs);
-+
-+    if (p_CcNode->maxNumOfKeys)
-+        RELEASE_LOCK(p_FmPcd->shadowLock);
-+
-+	ReleaseLst(&h_OldPointersLst);
-+	ReleaseLst(&h_NewPointersLst);
-+
-+    return err;
-+}
-+
-+t_Error FmPcdCcModifyKey(t_Handle h_FmPcd, t_Handle h_FmPcdCcNode,
-+                         uint16_t keyIndex, uint8_t keySize, uint8_t *p_Key,
-+                         uint8_t *p_Mask)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_FmPcdCcNode;
-+    t_FmPcd *p_FmPcd;
-+    t_List h_OldPointersLst, h_NewPointersLst;
-+    t_FmPcdModifyCcKeyAdditionalParams *p_ModifyKeyParams;
-+    uint16_t tmpKeyIndex;
-+    bool useShadowStructs = FALSE;
-+    t_Error err = E_OK;
-+
-+    if (keyIndex >= p_CcNode->numOfKeys)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                     ("keyIndex > previously cleared last index + 1"));
-+
-+    if (keySize != p_CcNode->userSizeOfExtraction)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("size for ModifyKey has to be the same as defined in SetNode"));
-+
-+    if (p_CcNode->h_FmPcd != h_FmPcd)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("handler to FmPcd is different from the handle provided at node initialization time"));
-+
-+    err = FindKeyIndex(h_FmPcdCcNode, keySize, p_Key, p_Mask, &tmpKeyIndex);
-+    if (GET_ERROR_TYPE(err) != E_NOT_FOUND)
-+        RETURN_ERROR(
-+                MINOR,
-+                E_ALREADY_EXISTS,
-+                ("The received key and mask pair was already found in the match table of the provided node"));
-+
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+
-+    INIT_LIST(&h_OldPointersLst);
-+    INIT_LIST(&h_NewPointersLst);
-+
-+    p_ModifyKeyParams = ModifyNodeCommonPart(p_CcNode, keyIndex,
-+                                             e_MODIFY_STATE_CHANGE, TRUE, TRUE,
-+                                             FALSE);
-+    if (!p_ModifyKeyParams)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+
-+    if (p_CcNode->maxNumOfKeys)
-+    {
-+        if (!TRY_LOCK(p_FmPcd->h_ShadowSpinlock, &p_FmPcd->shadowLock))
-+        {
-+            XX_Free(p_ModifyKeyParams);
-+            return ERROR_CODE(E_BUSY);
-+        }
-+
-+        useShadowStructs = TRUE;
-+    }
-+
-+    err = BuildNewNodeModifyKey(p_CcNode, keyIndex, p_Key, p_Mask,
-+                                p_ModifyKeyParams);
-+    if (err)
-+    {
-+        XX_Free(p_ModifyKeyParams);
-+        if (p_CcNode->maxNumOfKeys)
-+            RELEASE_LOCK(p_FmPcd->shadowLock);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    err = UpdatePtrWhichPointOnCrntMdfNode(p_CcNode, p_ModifyKeyParams,
-+                                           &h_OldPointersLst,
-+                                           &h_NewPointersLst);
-+    if (err)
-+    {
-+        ReleaseNewNodeCommonPart(p_ModifyKeyParams);
-+        XX_Free(p_ModifyKeyParams);
-+        if (p_CcNode->maxNumOfKeys)
-+            RELEASE_LOCK(p_FmPcd->shadowLock);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    err = DoDynamicChange(p_FmPcd, &h_OldPointersLst, &h_NewPointersLst,
-+                          p_ModifyKeyParams, useShadowStructs);
-+
-+    if (p_CcNode->maxNumOfKeys)
-+        RELEASE_LOCK(p_FmPcd->shadowLock);
-+
-+	ReleaseLst(&h_OldPointersLst);
-+	ReleaseLst(&h_NewPointersLst);
-+
-+    return err;
-+}
-+
-+t_Error FmPcdCcModifyMissNextEngineParamNode(
-+        t_Handle h_FmPcd, t_Handle h_FmPcdCcNode,
-+        t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_FmPcdCcNode;
-+    t_FmPcd *p_FmPcd;
-+    t_List h_OldPointersLst, h_NewPointersLst;
-+    uint16_t keyIndex;
-+    t_FmPcdModifyCcKeyAdditionalParams *p_ModifyKeyParams;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_CcNode, E_INVALID_VALUE);
-+
-+    keyIndex = p_CcNode->numOfKeys;
-+
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+
-+    INIT_LIST(&h_OldPointersLst);
-+    INIT_LIST(&h_NewPointersLst);
-+
-+    p_ModifyKeyParams = ModifyNodeCommonPart(p_CcNode, keyIndex,
-+                                             e_MODIFY_STATE_CHANGE, FALSE, TRUE,
-+                                             FALSE);
-+    if (!p_ModifyKeyParams)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+
-+    if (p_CcNode->maxNumOfKeys
-+            && !TRY_LOCK(p_FmPcd->h_ShadowSpinlock, &p_FmPcd->shadowLock))
-+    {
-+        XX_Free(p_ModifyKeyParams);
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = BuildNewNodeModifyNextEngine(h_FmPcd, p_CcNode, keyIndex,
-+                                       p_FmPcdCcNextEngineParams,
-+                                       &h_OldPointersLst, &h_NewPointersLst,
-+                                       p_ModifyKeyParams);
-+    if (err)
-+    {
-+        XX_Free(p_ModifyKeyParams);
-+        if (p_CcNode->maxNumOfKeys)
-+            RELEASE_LOCK(p_FmPcd->shadowLock);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    err = DoDynamicChange(p_FmPcd, &h_OldPointersLst, &h_NewPointersLst,
-+                          p_ModifyKeyParams, FALSE);
-+
-+    if (p_CcNode->maxNumOfKeys)
-+        RELEASE_LOCK(p_FmPcd->shadowLock);
-+
-+	ReleaseLst(&h_OldPointersLst);
-+	ReleaseLst(&h_NewPointersLst);
-+
-+    return err;
-+}
-+
-+t_Error FmPcdCcAddKey(t_Handle h_FmPcd, t_Handle h_FmPcdCcNode,
-+                      uint16_t keyIndex, uint8_t keySize,
-+                      t_FmPcdCcKeyParams *p_FmPcdCcKeyParams)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_FmPcdCcNode;
-+    t_FmPcd *p_FmPcd;
-+    t_FmPcdModifyCcKeyAdditionalParams *p_ModifyKeyParams;
-+    t_List h_OldPointersLst, h_NewPointersLst;
-+    bool useShadowStructs = FALSE;
-+    uint16_t tmpKeyIndex;
-+    t_Error err = E_OK;
-+
-+    if (keyIndex > p_CcNode->numOfKeys)
-+        RETURN_ERROR(MAJOR, E_NOT_IN_RANGE,
-+                     ("keyIndex > previously cleared last index + 1"));
-+
-+    if (keySize != p_CcNode->userSizeOfExtraction)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("keySize has to be defined as it was defined in initialization step"));
-+
-+    if (p_CcNode->h_FmPcd != h_FmPcd)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("handler to FmPcd is different from the handle provided at node initialization time"));
-+
-+    if (p_CcNode->maxNumOfKeys)
-+    {
-+        if (p_CcNode->numOfKeys == p_CcNode->maxNumOfKeys)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_FULL,
-+                    ("number of keys exceeds the maximal number of keys provided at node initialization time"));
-+    }
-+    else
-+        if (p_CcNode->numOfKeys == FM_PCD_MAX_NUM_OF_KEYS)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("number of keys can not be larger than %d", FM_PCD_MAX_NUM_OF_KEYS));
-+
-+    err = FindKeyIndex(h_FmPcdCcNode, keySize, p_FmPcdCcKeyParams->p_Key,
-+                       p_FmPcdCcKeyParams->p_Mask, &tmpKeyIndex);
-+    if (GET_ERROR_TYPE(err) != E_NOT_FOUND)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_ALREADY_EXISTS,
-+                ("The received key and mask pair was already found in the match table of the provided node"));
-+
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+
-+    INIT_LIST(&h_OldPointersLst);
-+    INIT_LIST(&h_NewPointersLst);
-+
-+    p_ModifyKeyParams = ModifyNodeCommonPart(p_CcNode, keyIndex,
-+                                             e_MODIFY_STATE_ADD, TRUE, TRUE,
-+                                             FALSE);
-+    if (!p_ModifyKeyParams)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+
-+    if (p_CcNode->maxNumOfKeys)
-+    {
-+        if (!TRY_LOCK(p_FmPcd->h_ShadowSpinlock, &p_FmPcd->shadowLock))
-+        {
-+            XX_Free(p_ModifyKeyParams);
-+            return ERROR_CODE(E_BUSY);
-+        }
-+
-+        useShadowStructs = TRUE;
-+    }
-+
-+    err = BuildNewNodeAddOrMdfyKeyAndNextEngine(h_FmPcd, p_CcNode, keyIndex,
-+                                                p_FmPcdCcKeyParams,
-+                                                p_ModifyKeyParams, TRUE);
-+    if (err)
-+    {
-+        ReleaseNewNodeCommonPart(p_ModifyKeyParams);
-+        XX_Free(p_ModifyKeyParams);
-+        if (p_CcNode->maxNumOfKeys)
-+            RELEASE_LOCK(p_FmPcd->shadowLock);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    err = UpdatePtrWhichPointOnCrntMdfNode(p_CcNode, p_ModifyKeyParams,
-+                                           &h_OldPointersLst,
-+                                           &h_NewPointersLst);
-+    if (err)
-+    {
-+        ReleaseNewNodeCommonPart(p_ModifyKeyParams);
-+        XX_Free(p_ModifyKeyParams);
-+        if (p_CcNode->maxNumOfKeys)
-+            RELEASE_LOCK(p_FmPcd->shadowLock);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    err = DoDynamicChange(p_FmPcd, &h_OldPointersLst, &h_NewPointersLst,
-+                          p_ModifyKeyParams, useShadowStructs);
-+    if (p_CcNode->maxNumOfKeys)
-+        RELEASE_LOCK(p_FmPcd->shadowLock);
-+
-+	ReleaseLst(&h_OldPointersLst);
-+	ReleaseLst(&h_NewPointersLst);
-+
-+    return err;
-+}
-+
-+t_Error FmPcdCcModifyKeyAndNextEngine(t_Handle h_FmPcd, t_Handle h_FmPcdCcNode,
-+                                      uint16_t keyIndex, uint8_t keySize,
-+                                      t_FmPcdCcKeyParams *p_FmPcdCcKeyParams)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_FmPcdCcNode;
-+    t_FmPcd *p_FmPcd;
-+    t_List h_OldPointersLst, h_NewPointersLst;
-+    t_FmPcdModifyCcKeyAdditionalParams *p_ModifyKeyParams;
-+    uint16_t tmpKeyIndex;
-+    bool useShadowStructs = FALSE;
-+    t_Error err = E_OK;
-+
-+    if (keyIndex > p_CcNode->numOfKeys)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                     ("keyIndex > previously cleared last index + 1"));
-+
-+    if (keySize != p_CcNode->userSizeOfExtraction)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("keySize has to be defined as it was defined in initialization step"));
-+
-+    if (p_CcNode->h_FmPcd != h_FmPcd)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("handler to FmPcd is different from the handle provided at node initialization time"));
-+
-+    err = FindKeyIndex(h_FmPcdCcNode, keySize, p_FmPcdCcKeyParams->p_Key,
-+                       p_FmPcdCcKeyParams->p_Mask, &tmpKeyIndex);
-+    if (GET_ERROR_TYPE(err) != E_NOT_FOUND)
-+        RETURN_ERROR(
-+                MINOR,
-+                E_ALREADY_EXISTS,
-+                ("The received key and mask pair was already found in the match table of the provided node"));
-+
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+
-+    INIT_LIST(&h_OldPointersLst);
-+    INIT_LIST(&h_NewPointersLst);
-+
-+    p_ModifyKeyParams = ModifyNodeCommonPart(p_CcNode, keyIndex,
-+                                             e_MODIFY_STATE_CHANGE, TRUE, TRUE,
-+                                             FALSE);
-+    if (!p_ModifyKeyParams)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+
-+    if (p_CcNode->maxNumOfKeys)
-+    {
-+        if (!TRY_LOCK(p_FmPcd->h_ShadowSpinlock, &p_FmPcd->shadowLock))
-+        {
-+            XX_Free(p_ModifyKeyParams);
-+            return ERROR_CODE(E_BUSY);
-+        }
-+
-+        useShadowStructs = TRUE;
-+    }
-+
-+    err = BuildNewNodeAddOrMdfyKeyAndNextEngine(h_FmPcd, p_CcNode, keyIndex,
-+                                                p_FmPcdCcKeyParams,
-+                                                p_ModifyKeyParams, FALSE);
-+    if (err)
-+    {
-+        ReleaseNewNodeCommonPart(p_ModifyKeyParams);
-+        XX_Free(p_ModifyKeyParams);
-+        if (p_CcNode->maxNumOfKeys)
-+            RELEASE_LOCK(p_FmPcd->shadowLock);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    err = UpdatePtrWhichPointOnCrntMdfNode(p_CcNode, p_ModifyKeyParams,
-+                                           &h_OldPointersLst,
-+                                           &h_NewPointersLst);
-+    if (err)
-+    {
-+        ReleaseNewNodeCommonPart(p_ModifyKeyParams);
-+        XX_Free(p_ModifyKeyParams);
-+        if (p_CcNode->maxNumOfKeys)
-+            RELEASE_LOCK(p_FmPcd->shadowLock);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    err = DoDynamicChange(p_FmPcd, &h_OldPointersLst, &h_NewPointersLst,
-+                          p_ModifyKeyParams, useShadowStructs);
-+
-+    if (p_CcNode->maxNumOfKeys)
-+        RELEASE_LOCK(p_FmPcd->shadowLock);
-+
-+	ReleaseLst(&h_OldPointersLst);
-+	ReleaseLst(&h_NewPointersLst);
-+
-+    return err;
-+}
-+
-+uint32_t FmPcdCcGetNodeAddrOffsetFromNodeInfo(t_Handle h_FmPcd,
-+                                              t_Handle h_Pointer)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    t_CcNodeInformation *p_CcNodeInfo;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmPcd, E_INVALID_HANDLE,
-+                              (uint32_t)ILLEGAL_BASE);
-+
-+    p_CcNodeInfo = CC_NODE_F_OBJECT(h_Pointer);
-+
-+    return (uint32_t)(XX_VirtToPhys(p_CcNodeInfo->h_CcNode)
-+            - p_FmPcd->physicalMuramBase);
-+}
-+
-+t_Error FmPcdCcGetGrpParams(t_Handle h_FmPcdCcTree, uint8_t grpId,
-+                            uint32_t *p_GrpBits, uint8_t *p_GrpBase)
-+{
-+    t_FmPcdCcTree *p_FmPcdCcTree = (t_FmPcdCcTree *)h_FmPcdCcTree;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcdCcTree, E_INVALID_HANDLE);
-+
-+    if (grpId >= p_FmPcdCcTree->numOfGrps)
-+        RETURN_ERROR(MAJOR, E_INVALID_HANDLE,
-+                     ("grpId you asked > numOfGroup of relevant tree"));
-+
-+    *p_GrpBits = p_FmPcdCcTree->fmPcdGroupParam[grpId].totalBitsMask;
-+    *p_GrpBase = p_FmPcdCcTree->fmPcdGroupParam[grpId].baseGroupEntry;
-+
-+    return E_OK;
-+}
-+
-+t_Error FmPcdCcBindTree(t_Handle h_FmPcd, t_Handle h_PcdParams,
-+                        t_Handle h_FmPcdCcTree, uint32_t *p_Offset,
-+                        t_Handle h_FmPort)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    t_FmPcdCcTree *p_FmPcdCcTree = (t_FmPcdCcTree *)h_FmPcdCcTree;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcdCcTree, E_INVALID_HANDLE);
-+
-+    /* this routine must be protected by the calling routine by locking all PCD modules! */
-+
-+    err = CcUpdateParams(h_FmPcd, h_PcdParams, h_FmPort, h_FmPcdCcTree, TRUE);
-+
-+    if (err == E_OK)
-+        UpdateCcRootOwner(p_FmPcdCcTree, TRUE);
-+
-+    *p_Offset = (uint32_t)(XX_VirtToPhys(
-+            UINT_TO_PTR(p_FmPcdCcTree->ccTreeBaseAddr))
-+            - p_FmPcd->physicalMuramBase);
-+
-+    return err;
-+}
-+
-+t_Error FmPcdCcUnbindTree(t_Handle h_FmPcd, t_Handle h_FmPcdCcTree)
-+{
-+    t_FmPcdCcTree *p_FmPcdCcTree = (t_FmPcdCcTree *)h_FmPcdCcTree;
-+
-+    /* this routine must be protected by the calling routine by locking all PCD modules! */
-+
-+    UNUSED(h_FmPcd);
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcdCcTree, E_INVALID_HANDLE);
-+
-+    UpdateCcRootOwner(p_FmPcdCcTree, FALSE);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmPcdCcNodeTreeTryLock(t_Handle h_FmPcd, t_Handle h_FmPcdCcNode,
-+                               t_List *p_List)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_FmPcdCcNode;
-+    t_List *p_Pos, *p_Tmp;
-+    t_CcNodeInformation *p_CcNodeInfo, nodeInfo;
-+    uint32_t intFlags;
-+    t_Error err = E_OK;
-+
-+    intFlags = FmPcdLock(h_FmPcd);
-+
-+    LIST_FOR_EACH(p_Pos, &p_CcNode->ccTreesLst)
-+    {
-+        p_CcNodeInfo = CC_NODE_F_OBJECT(p_Pos);
-+        ASSERT_COND(p_CcNodeInfo->h_CcNode);
-+
-+        err = CcRootTryLock(p_CcNodeInfo->h_CcNode);
-+
-+        if (err)
-+        {
-+            LIST_FOR_EACH(p_Tmp, &p_CcNode->ccTreesLst)
-+            {
-+                if (p_Tmp == p_Pos)
-+                    break;
-+
-+                CcRootReleaseLock(p_CcNodeInfo->h_CcNode);
-+            }
-+            break;
-+        }
-+
-+        memset(&nodeInfo, 0, sizeof(t_CcNodeInformation));
-+        nodeInfo.h_CcNode = p_CcNodeInfo->h_CcNode;
-+        EnqueueNodeInfoToRelevantLst(p_List, &nodeInfo, NULL);
-+    }
-+
-+    FmPcdUnlock(h_FmPcd, intFlags);
-+    CORE_MemoryBarrier();
-+
-+    return err;
-+}
-+
-+void FmPcdCcNodeTreeReleaseLock(t_Handle h_FmPcd, t_List *p_List)
-+{
-+    t_List *p_Pos;
-+    t_CcNodeInformation *p_CcNodeInfo;
-+    t_Handle h_FmPcdCcTree;
-+    uint32_t intFlags;
-+
-+    intFlags = FmPcdLock(h_FmPcd);
-+
-+    LIST_FOR_EACH(p_Pos, p_List)
-+    {
-+        p_CcNodeInfo = CC_NODE_F_OBJECT(p_Pos);
-+        h_FmPcdCcTree = p_CcNodeInfo->h_CcNode;
-+        CcRootReleaseLock(h_FmPcdCcTree);
-+    }
-+
-+    ReleaseLst(p_List);
-+
-+    FmPcdUnlock(h_FmPcd, intFlags);
-+    CORE_MemoryBarrier();
-+}
-+
-+t_Error FmPcdUpdateCcShadow(t_FmPcd *p_FmPcd, uint32_t size, uint32_t align)
-+{
-+    uint32_t intFlags;
-+    uint32_t newSize = 0, newAlign = 0;
-+    bool allocFail = FALSE;
-+
-+    ASSERT_COND(p_FmPcd);
-+
-+    if (!size)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("size must be larger then 0"));
-+
-+    if (!POWER_OF_2(align))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("alignment must be power of 2"));
-+
-+    newSize = p_FmPcd->ccShadowSize;
-+    newAlign = p_FmPcd->ccShadowAlign;
-+
-+    /* Check if current shadow is large enough to hold the requested size */
-+    if (size > p_FmPcd->ccShadowSize)
-+        newSize = size;
-+
-+    /* Check if current shadow matches the requested alignment */
-+    if (align > p_FmPcd->ccShadowAlign)
-+        newAlign = align;
-+
-+    /* If a bigger shadow size or bigger shadow alignment are required,
-+     a new shadow will be allocated */
-+    if ((newSize != p_FmPcd->ccShadowSize)
-+            || (newAlign != p_FmPcd->ccShadowAlign))
-+    {
-+        intFlags = FmPcdLock(p_FmPcd);
-+
-+        if (p_FmPcd->p_CcShadow)
-+        {
-+            FM_MURAM_FreeMem(FmPcdGetMuramHandle(p_FmPcd), p_FmPcd->p_CcShadow);
-+            p_FmPcd->ccShadowSize = 0;
-+            p_FmPcd->ccShadowAlign = 0;
-+        }
-+
-+        p_FmPcd->p_CcShadow = FM_MURAM_AllocMem(FmPcdGetMuramHandle(p_FmPcd),
-+                                                newSize, newAlign);
-+        if (!p_FmPcd->p_CcShadow)
-+        {
-+            allocFail = TRUE;
-+
-+            /* If new shadow size allocation failed,
-+             re-allocate with previous parameters */
-+            p_FmPcd->p_CcShadow = FM_MURAM_AllocMem(
-+                    FmPcdGetMuramHandle(p_FmPcd), p_FmPcd->ccShadowSize,
-+                    p_FmPcd->ccShadowAlign);
-+        }
-+
-+        FmPcdUnlock(p_FmPcd, intFlags);
-+
-+        if (allocFail)
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                         ("MURAM allocation for CC Shadow memory"));
-+
-+        p_FmPcd->ccShadowSize = newSize;
-+        p_FmPcd->ccShadowAlign = newAlign;
-+    }
-+
-+    return E_OK;
-+}
-+
-+#if (DPAA_VERSION >= 11)
-+void FmPcdCcGetAdTablesThatPointOnReplicGroup(t_Handle h_Node,
-+                                              t_Handle h_ReplicGroup,
-+                                              t_List *p_AdTables,
-+                                              uint32_t *p_NumOfAdTables)
-+{
-+    t_FmPcdCcNode *p_CurrentNode = (t_FmPcdCcNode *)h_Node;
-+    int i = 0;
-+    void * p_AdTable;
-+    t_CcNodeInformation ccNodeInfo;
-+
-+    ASSERT_COND(h_Node);
-+    *p_NumOfAdTables = 0;
-+
-+    /* search in the current node which exact index points on this current replicator group for getting AD */
-+    for (i = 0; i < p_CurrentNode->numOfKeys + 1; i++)
-+    {
-+        if ((p_CurrentNode->keyAndNextEngineParams[i].nextEngineParams.nextEngine
-+                == e_FM_PCD_FR)
-+                && ((p_CurrentNode->keyAndNextEngineParams[i].nextEngineParams.params.frParams.h_FrmReplic
-+                        == (t_Handle)h_ReplicGroup)))
-+        {
-+            /* save the current ad table in the list */
-+            /* this entry uses the input replicator group */
-+            p_AdTable =
-+                    PTR_MOVE(p_CurrentNode->h_AdTable, i*FM_PCD_CC_AD_ENTRY_SIZE);
-+            memset(&ccNodeInfo, 0, sizeof(t_CcNodeInformation));
-+            ccNodeInfo.h_CcNode = p_AdTable;
-+            EnqueueNodeInfoToRelevantLst(p_AdTables, &ccNodeInfo, NULL);
-+            (*p_NumOfAdTables)++;
-+        }
-+    }
-+
-+    ASSERT_COND(i != p_CurrentNode->numOfKeys);
-+}
-+#endif /* (DPAA_VERSION >= 11) */
-+/*********************** End of inter-module routines ************************/
-+
-+/****************************************/
-+/*       API Init unit functions        */
-+/****************************************/
-+
-+t_Handle FM_PCD_CcRootBuild(t_Handle h_FmPcd,
-+                            t_FmPcdCcTreeParams *p_PcdGroupsParam)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    t_Error err = E_OK;
-+    int i = 0, j = 0, k = 0;
-+    t_FmPcdCcTree *p_FmPcdCcTree;
-+    uint8_t numOfEntries;
-+    t_Handle p_CcTreeTmp;
-+    t_FmPcdCcGrpParams *p_FmPcdCcGroupParams;
-+    t_FmPcdCcKeyAndNextEngineParams *p_Params, *p_KeyAndNextEngineParams;
-+    t_NetEnvParams netEnvParams;
-+    uint8_t lastOne = 0;
-+    uint32_t requiredAction = 0;
-+    t_FmPcdCcNode *p_FmPcdCcNextNode;
-+    t_CcNodeInformation ccNodeInfo, *p_CcInformation;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmPcd, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(p_PcdGroupsParam, E_INVALID_HANDLE, NULL);
-+
-+    if (p_PcdGroupsParam->numOfGrps > FM_PCD_MAX_NUM_OF_CC_GROUPS)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("numOfGrps should not exceed %d", FM_PCD_MAX_NUM_OF_CC_GROUPS));
-+        return NULL;
-+    }
-+
-+    p_FmPcdCcTree = (t_FmPcdCcTree*)XX_Malloc(sizeof(t_FmPcdCcTree));
-+    if (!p_FmPcdCcTree)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("PCD tree structure"));
-+        return NULL;
-+    }
-+    memset(p_FmPcdCcTree, 0, sizeof(t_FmPcdCcTree));
-+    p_FmPcdCcTree->h_FmPcd = h_FmPcd;
-+
-+    p_Params = (t_FmPcdCcKeyAndNextEngineParams*)XX_Malloc(
-+            FM_PCD_MAX_NUM_OF_CC_GROUPS
-+                    * sizeof(t_FmPcdCcKeyAndNextEngineParams));
-+    memset(p_Params,
-+           0,
-+           FM_PCD_MAX_NUM_OF_CC_GROUPS
-+                   * sizeof(t_FmPcdCcKeyAndNextEngineParams));
-+
-+    INIT_LIST(&p_FmPcdCcTree->fmPortsLst);
-+
-+#ifdef FM_CAPWAP_SUPPORT
-+    if ((p_PcdGroupsParam->numOfGrps == 1) &&
-+            (p_PcdGroupsParam->ccGrpParams[0].numOfDistinctionUnits == 0) &&
-+            (p_PcdGroupsParam->ccGrpParams[0].nextEnginePerEntriesInGrp[0].nextEngine == e_FM_PCD_CC) &&
-+            p_PcdGroupsParam->ccGrpParams[0].nextEnginePerEntriesInGrp[0].params.ccParams.h_CcNode &&
-+            IsCapwapApplSpecific(p_PcdGroupsParam->ccGrpParams[0].nextEnginePerEntriesInGrp[0].params.ccParams.h_CcNode))
-+    {
-+        p_PcdGroupsParam->ccGrpParams[0].nextEnginePerEntriesInGrp[0].h_Manip = FmPcdManipApplSpecificBuild();
-+        if (!p_PcdGroupsParam->ccGrpParams[0].nextEnginePerEntriesInGrp[0].h_Manip)
-+        {
-+            DeleteTree(p_FmPcdCcTree,p_FmPcd);
-+            XX_Free(p_Params);
-+            REPORT_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+            return NULL;
-+        }
-+    }
-+#endif /* FM_CAPWAP_SUPPORT */
-+
-+    numOfEntries = 0;
-+    p_FmPcdCcTree->netEnvId = FmPcdGetNetEnvId(p_PcdGroupsParam->h_NetEnv);
-+
-+    for (i = 0; i < p_PcdGroupsParam->numOfGrps; i++)
-+    {
-+        p_FmPcdCcGroupParams = &p_PcdGroupsParam->ccGrpParams[i];
-+
-+        if (p_FmPcdCcGroupParams->numOfDistinctionUnits
-+                > FM_PCD_MAX_NUM_OF_CC_UNITS)
-+        {
-+            DeleteTree(p_FmPcdCcTree, p_FmPcd);
-+            XX_Free(p_Params);
-+            REPORT_ERROR(MAJOR, E_INVALID_VALUE,
-+                    ("numOfDistinctionUnits (group %d) should not exceed %d", i, FM_PCD_MAX_NUM_OF_CC_UNITS));
-+            return NULL;
-+        }
-+
-+        p_FmPcdCcTree->fmPcdGroupParam[i].baseGroupEntry = numOfEntries;
-+        p_FmPcdCcTree->fmPcdGroupParam[i].numOfEntriesInGroup = (uint8_t)(0x01
-+                << p_FmPcdCcGroupParams->numOfDistinctionUnits);
-+        numOfEntries += p_FmPcdCcTree->fmPcdGroupParam[i].numOfEntriesInGroup;
-+        if (numOfEntries > FM_PCD_MAX_NUM_OF_CC_GROUPS)
-+        {
-+            DeleteTree(p_FmPcdCcTree, p_FmPcd);
-+            XX_Free(p_Params);
-+            REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("numOfEntries can not be larger than %d", FM_PCD_MAX_NUM_OF_CC_GROUPS));
-+            return NULL;
-+        }
-+
-+        if (lastOne)
-+        {
-+            if (p_FmPcdCcTree->fmPcdGroupParam[i].numOfEntriesInGroup > lastOne)
-+            {
-+                DeleteTree(p_FmPcdCcTree, p_FmPcd);
-+                XX_Free(p_Params);
-+                REPORT_ERROR(MAJOR, E_CONFLICT, ("numOfEntries per group must be set in descending order"));
-+                return NULL;
-+            }
-+        }
-+
-+        lastOne = p_FmPcdCcTree->fmPcdGroupParam[i].numOfEntriesInGroup;
-+
-+        netEnvParams.netEnvId = p_FmPcdCcTree->netEnvId;
-+        netEnvParams.numOfDistinctionUnits =
-+                p_FmPcdCcGroupParams->numOfDistinctionUnits;
-+
-+        memcpy(netEnvParams.unitIds, &p_FmPcdCcGroupParams->unitIds,
-+               (sizeof(uint8_t)) * p_FmPcdCcGroupParams->numOfDistinctionUnits);
-+
-+        err = PcdGetUnitsVector(p_FmPcd, &netEnvParams);
-+        if (err)
-+        {
-+            DeleteTree(p_FmPcdCcTree, p_FmPcd);
-+            XX_Free(p_Params);
-+            REPORT_ERROR(MAJOR, err, NO_MSG);
-+            return NULL;
-+        }
-+
-+        p_FmPcdCcTree->fmPcdGroupParam[i].totalBitsMask = netEnvParams.vector;
-+        for (j = 0; j < p_FmPcdCcTree->fmPcdGroupParam[i].numOfEntriesInGroup;
-+                j++)
-+        {
-+            err = ValidateNextEngineParams(
-+                    h_FmPcd,
-+                    &p_FmPcdCcGroupParams->nextEnginePerEntriesInGrp[j],
-+                    e_FM_PCD_CC_STATS_MODE_NONE);
-+            if (err)
-+            {
-+                DeleteTree(p_FmPcdCcTree, p_FmPcd);
-+                XX_Free(p_Params);
-+                REPORT_ERROR(MAJOR, err, (NO_MSG));
-+                return NULL;
-+            }
-+
-+            if (p_FmPcdCcGroupParams->nextEnginePerEntriesInGrp[j].h_Manip)
-+            {
-+                err = FmPcdManipCheckParamsForCcNextEngine(
-+                        &p_FmPcdCcGroupParams->nextEnginePerEntriesInGrp[j],
-+                        &requiredAction);
-+                if (err)
-+                {
-+                    DeleteTree(p_FmPcdCcTree, p_FmPcd);
-+                    XX_Free(p_Params);
-+                    REPORT_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+                    return NULL;
-+                }
-+            }
-+            p_KeyAndNextEngineParams = p_Params + k;
-+
-+            memcpy(&p_KeyAndNextEngineParams->nextEngineParams,
-+                   &p_FmPcdCcGroupParams->nextEnginePerEntriesInGrp[j],
-+                   sizeof(t_FmPcdCcNextEngineParams));
-+
-+            if ((p_KeyAndNextEngineParams->nextEngineParams.nextEngine
-+                    == e_FM_PCD_CC)
-+                    && p_KeyAndNextEngineParams->nextEngineParams.h_Manip)
-+            {
-+                err =
-+                        AllocAndFillAdForContLookupManip(
-+                                p_KeyAndNextEngineParams->nextEngineParams.params.ccParams.h_CcNode);
-+                if (err)
-+                {
-+                    DeleteTree(p_FmPcdCcTree, p_FmPcd);
-+                    XX_Free(p_Params);
-+                    REPORT_ERROR(MAJOR, E_NO_MEMORY, ("MURAM allocation for CC Tree"));
-+                    return NULL;
-+                }
-+            }
-+
-+            requiredAction |= UPDATE_CC_WITH_TREE;
-+            p_KeyAndNextEngineParams->requiredAction = requiredAction;
-+
-+            k++;
-+        }
-+    }
-+
-+    p_FmPcdCcTree->numOfEntries = (uint8_t)k;
-+    p_FmPcdCcTree->numOfGrps = p_PcdGroupsParam->numOfGrps;
-+
-+    p_FmPcdCcTree->ccTreeBaseAddr =
-+            PTR_TO_UINT(FM_MURAM_AllocMem(FmPcdGetMuramHandle(h_FmPcd),
-+                            (uint32_t)( FM_PCD_MAX_NUM_OF_CC_GROUPS * FM_PCD_CC_AD_ENTRY_SIZE),
-+                            FM_PCD_CC_TREE_ADDR_ALIGN));
-+    if (!p_FmPcdCcTree->ccTreeBaseAddr)
-+    {
-+        DeleteTree(p_FmPcdCcTree, p_FmPcd);
-+        XX_Free(p_Params);
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("MURAM allocation for CC Tree"));
-+        return NULL;
-+    }
-+    MemSet8(
-+            UINT_TO_PTR(p_FmPcdCcTree->ccTreeBaseAddr), 0,
-+            (uint32_t)(FM_PCD_MAX_NUM_OF_CC_GROUPS * FM_PCD_CC_AD_ENTRY_SIZE));
-+
-+    p_CcTreeTmp = UINT_TO_PTR(p_FmPcdCcTree->ccTreeBaseAddr);
-+
-+    for (i = 0; i < numOfEntries; i++)
-+    {
-+        p_KeyAndNextEngineParams = p_Params + i;
-+
-+        NextStepAd(p_CcTreeTmp, NULL,
-+                   &p_KeyAndNextEngineParams->nextEngineParams, p_FmPcd);
-+
-+        p_CcTreeTmp = PTR_MOVE(p_CcTreeTmp, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+        memcpy(&p_FmPcdCcTree->keyAndNextEngineParams[i],
-+               p_KeyAndNextEngineParams,
-+               sizeof(t_FmPcdCcKeyAndNextEngineParams));
-+
-+        if (p_FmPcdCcTree->keyAndNextEngineParams[i].nextEngineParams.nextEngine
-+                == e_FM_PCD_CC)
-+        {
-+            p_FmPcdCcNextNode =
-+                    (t_FmPcdCcNode*)p_FmPcdCcTree->keyAndNextEngineParams[i].nextEngineParams.params.ccParams.h_CcNode;
-+            p_CcInformation = FindNodeInfoInReleventLst(
-+                    &p_FmPcdCcNextNode->ccTreeIdLst, (t_Handle)p_FmPcdCcTree,
-+                    p_FmPcdCcNextNode->h_Spinlock);
-+
-+            if (!p_CcInformation)
-+            {
-+                memset(&ccNodeInfo, 0, sizeof(t_CcNodeInformation));
-+                ccNodeInfo.h_CcNode = (t_Handle)p_FmPcdCcTree;
-+                ccNodeInfo.index = 1;
-+                EnqueueNodeInfoToRelevantLst(&p_FmPcdCcNextNode->ccTreeIdLst,
-+                                             &ccNodeInfo,
-+                                             p_FmPcdCcNextNode->h_Spinlock);
-+            }
-+            else
-+                p_CcInformation->index++;
-+        }
-+    }
-+
-+    FmPcdIncNetEnvOwners(h_FmPcd, p_FmPcdCcTree->netEnvId);
-+    p_CcTreeTmp = UINT_TO_PTR(p_FmPcdCcTree->ccTreeBaseAddr);
-+
-+    if (!FmPcdLockTryLockAll(p_FmPcd))
-+    {
-+        FM_PCD_CcRootDelete(p_FmPcdCcTree);
-+        XX_Free(p_Params);
-+        DBG(TRACE, ("FmPcdLockTryLockAll failed"));
-+        return NULL;
-+    }
-+
-+    for (i = 0; i < numOfEntries; i++)
-+    {
-+        if (p_FmPcdCcTree->keyAndNextEngineParams[i].requiredAction)
-+        {
-+            err = SetRequiredAction(
-+                    h_FmPcd,
-+                    p_FmPcdCcTree->keyAndNextEngineParams[i].requiredAction,
-+                    &p_FmPcdCcTree->keyAndNextEngineParams[i], p_CcTreeTmp, 1,
-+                    p_FmPcdCcTree);
-+            if (err)
-+            {
-+                FmPcdLockUnlockAll(p_FmPcd);
-+                FM_PCD_CcRootDelete(p_FmPcdCcTree);
-+                XX_Free(p_Params);
-+                REPORT_ERROR(MAJOR, E_NO_MEMORY, ("No memory"));
-+                return NULL;
-+            }
-+            p_CcTreeTmp = PTR_MOVE(p_CcTreeTmp, FM_PCD_CC_AD_ENTRY_SIZE);
-+        }
-+    }
-+
-+    FmPcdLockUnlockAll(p_FmPcd);
-+    p_FmPcdCcTree->p_Lock = FmPcdAcquireLock(p_FmPcd);
-+    if (!p_FmPcdCcTree->p_Lock)
-+    {
-+        FM_PCD_CcRootDelete(p_FmPcdCcTree);
-+        XX_Free(p_Params);
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM CC lock"));
-+        return NULL;
-+    }
-+
-+    XX_Free(p_Params);
-+
-+    return p_FmPcdCcTree;
-+}
-+
-+t_Error FM_PCD_CcRootDelete(t_Handle h_CcTree)
-+{
-+    t_FmPcd *p_FmPcd;
-+    t_FmPcdCcTree *p_CcTree = (t_FmPcdCcTree *)h_CcTree;
-+    int i = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_CcTree, E_INVALID_STATE);
-+    p_FmPcd = (t_FmPcd *)p_CcTree->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+
-+    FmPcdDecNetEnvOwners(p_FmPcd, p_CcTree->netEnvId);
-+
-+    if (p_CcTree->owners)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_SELECTION,
-+                ("the tree with this ID can not be removed because this tree is occupied, first - unbind this tree"));
-+
-+    /* Delete ip-reassembly schemes if exist */
-+    if (p_CcTree->h_IpReassemblyManip)
-+    {
-+        FmPcdManipDeleteIpReassmSchemes(p_CcTree->h_IpReassemblyManip);
-+        FmPcdManipUpdateOwner(p_CcTree->h_IpReassemblyManip, FALSE);
-+    }
-+
-+    /* Delete capwap-reassembly schemes if exist */
-+    if (p_CcTree->h_CapwapReassemblyManip)
-+    {
-+        FmPcdManipDeleteCapwapReassmSchemes(p_CcTree->h_CapwapReassemblyManip);
-+        FmPcdManipUpdateOwner(p_CcTree->h_CapwapReassemblyManip, FALSE);
-+    }
-+
-+    for (i = 0; i < p_CcTree->numOfEntries; i++)
-+    {
-+        if (p_CcTree->keyAndNextEngineParams[i].nextEngineParams.nextEngine
-+                == e_FM_PCD_CC)
-+            UpdateNodeOwner(
-+                    p_CcTree->keyAndNextEngineParams[i].nextEngineParams.params.ccParams.h_CcNode,
-+                    FALSE);
-+
-+        if (p_CcTree->keyAndNextEngineParams[i].nextEngineParams.h_Manip)
-+            FmPcdManipUpdateOwner(
-+                    p_CcTree->keyAndNextEngineParams[i].nextEngineParams.h_Manip,
-+                    FALSE);
-+
-+#ifdef FM_CAPWAP_SUPPORT
-+        if ((p_CcTree->numOfGrps == 1) &&
-+                (p_CcTree->fmPcdGroupParam[0].numOfEntriesInGroup == 1) &&
-+                (p_CcTree->keyAndNextEngineParams[0].nextEngineParams.nextEngine == e_FM_PCD_CC) &&
-+                p_CcTree->keyAndNextEngineParams[0].nextEngineParams.params.ccParams.h_CcNode &&
-+                IsCapwapApplSpecific(p_CcTree->keyAndNextEngineParams[0].nextEngineParams.params.ccParams.h_CcNode))
-+        {
-+            if (FM_PCD_ManipNodeDelete(p_CcTree->keyAndNextEngineParams[0].nextEngineParams.h_Manip) != E_OK)
-+            return E_INVALID_STATE;
-+        }
-+#endif /* FM_CAPWAP_SUPPORT */
-+
-+#if (DPAA_VERSION >= 11)
-+        if ((p_CcTree->keyAndNextEngineParams[i].nextEngineParams.nextEngine
-+                == e_FM_PCD_FR)
-+                && (p_CcTree->keyAndNextEngineParams[i].nextEngineParams.params.frParams.h_FrmReplic))
-+            FrmReplicGroupUpdateOwner(
-+                    p_CcTree->keyAndNextEngineParams[i].nextEngineParams.params.frParams.h_FrmReplic,
-+                    FALSE);
-+#endif /* (DPAA_VERSION >= 11) */
-+    }
-+
-+    if (p_CcTree->p_Lock)
-+        FmPcdReleaseLock(p_CcTree->h_FmPcd, p_CcTree->p_Lock);
-+
-+    DeleteTree(p_CcTree, p_FmPcd);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_CcRootModifyNextEngine(
-+        t_Handle h_CcTree, uint8_t grpId, uint8_t index,
-+        t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams)
-+{
-+    t_FmPcd *p_FmPcd;
-+    t_FmPcdCcTree *p_CcTree = (t_FmPcdCcTree *)h_CcTree;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcdCcNextEngineParams, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_CcTree, E_INVALID_STATE);
-+    p_FmPcd = (t_FmPcd *)p_CcTree->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+
-+    if (!FmPcdLockTryLockAll(p_FmPcd))
-+    {
-+        DBG(TRACE, ("FmPcdLockTryLockAll failed"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = FmPcdCcModifyNextEngineParamTree(p_FmPcd, p_CcTree, grpId, index,
-+                                           p_FmPcdCcNextEngineParams);
-+    FmPcdLockUnlockAll(p_FmPcd);
-+
-+    if (err)
-+    {
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Handle FM_PCD_MatchTableSet(t_Handle h_FmPcd,
-+                              t_FmPcdCcNodeParams *p_CcNodeParam)
-+{
-+    t_FmPcdCcNode *p_CcNode;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmPcd, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(p_CcNodeParam, E_NULL_POINTER, NULL);
-+
-+    p_CcNode = (t_FmPcdCcNode*)XX_Malloc(sizeof(t_FmPcdCcNode));
-+    if (!p_CcNode)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("No memory"));
-+        return NULL;
-+    }
-+    memset(p_CcNode, 0, sizeof(t_FmPcdCcNode));
-+
-+    err = MatchTableSet(h_FmPcd, p_CcNode, p_CcNodeParam);
-+
-+    switch(GET_ERROR_TYPE(err)
-+)    {
-+        case E_OK:
-+        break;
-+
-+        case E_BUSY:
-+        DBG(TRACE, ("E_BUSY error"));
-+        return NULL;
-+
-+        default:
-+        REPORT_ERROR(MAJOR, err, NO_MSG);
-+        return NULL;
-+    }
-+
-+    return p_CcNode;
-+}
-+
-+t_Error FM_PCD_MatchTableDelete(t_Handle h_CcNode)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    int i = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_CcNode, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_CcNode->h_FmPcd, E_INVALID_HANDLE);
-+
-+    if (p_CcNode->owners)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_STATE,
-+                ("This node cannot be removed because it is occupied; first unbind this node"));
-+
-+    for (i = 0; i < p_CcNode->numOfKeys; i++)
-+        if (p_CcNode->keyAndNextEngineParams[i].nextEngineParams.nextEngine
-+                == e_FM_PCD_CC)
-+            UpdateNodeOwner(
-+                    p_CcNode->keyAndNextEngineParams[i].nextEngineParams.params.ccParams.h_CcNode,
-+                    FALSE);
-+
-+    if (p_CcNode->keyAndNextEngineParams[i].nextEngineParams.nextEngine
-+            == e_FM_PCD_CC)
-+        UpdateNodeOwner(
-+                p_CcNode->keyAndNextEngineParams[i].nextEngineParams.params.ccParams.h_CcNode,
-+                FALSE);
-+
-+    /* Handle also Miss entry */
-+    for (i = 0; i < p_CcNode->numOfKeys + 1; i++)
-+    {
-+        if (p_CcNode->keyAndNextEngineParams[i].nextEngineParams.h_Manip)
-+            FmPcdManipUpdateOwner(
-+                    p_CcNode->keyAndNextEngineParams[i].nextEngineParams.h_Manip,
-+                    FALSE);
-+
-+#if (DPAA_VERSION >= 11)
-+        if ((p_CcNode->keyAndNextEngineParams[i].nextEngineParams.nextEngine
-+                == e_FM_PCD_FR)
-+                && (p_CcNode->keyAndNextEngineParams[i].nextEngineParams.params.frParams.h_FrmReplic))
-+        {
-+            FrmReplicGroupUpdateOwner(
-+                    p_CcNode->keyAndNextEngineParams[i].nextEngineParams.params.frParams.h_FrmReplic,
-+                    FALSE);
-+        }
-+#endif /* (DPAA_VERSION >= 11) */
-+    }
-+
-+    DeleteNode(p_CcNode);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_MatchTableAddKey(t_Handle h_CcNode, uint16_t keyIndex,
-+                                uint8_t keySize,
-+                                t_FmPcdCcKeyParams *p_KeyParams)
-+{
-+    t_FmPcd *p_FmPcd;
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_KeyParams, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_CcNode, E_INVALID_HANDLE);
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->h_Hc, E_INVALID_HANDLE);
-+
-+    if (keyIndex == FM_PCD_LAST_KEY_INDEX)
-+        keyIndex = p_CcNode->numOfKeys;
-+
-+    if (!FmPcdLockTryLockAll(p_FmPcd))
-+    {
-+        DBG(TRACE, ("FmPcdLockTryLockAll failed"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = FmPcdCcAddKey(p_FmPcd, p_CcNode, keyIndex, keySize, p_KeyParams);
-+
-+    FmPcdLockUnlockAll(p_FmPcd);
-+
-+    switch(GET_ERROR_TYPE(err)
-+)    {
-+        case E_OK:
-+        return E_OK;
-+
-+        case E_BUSY:
-+        DBG(TRACE, ("E_BUSY error"));
-+        return ERROR_CODE(E_BUSY);
-+
-+        default:
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+}
-+
-+t_Error FM_PCD_MatchTableRemoveKey(t_Handle h_CcNode, uint16_t keyIndex)
-+{
-+    t_FmPcd *p_FmPcd;
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_CcNode, E_INVALID_HANDLE);
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->h_Hc, E_INVALID_HANDLE);
-+
-+    if (!FmPcdLockTryLockAll(p_FmPcd))
-+    {
-+        DBG(TRACE, ("FmPcdLockTryLockAll failed"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = FmPcdCcRemoveKey(p_FmPcd, p_CcNode, keyIndex);
-+
-+    FmPcdLockUnlockAll(p_FmPcd);
-+
-+    switch(GET_ERROR_TYPE(err)
-+)    {
-+        case E_OK:
-+        return E_OK;
-+
-+        case E_BUSY:
-+        DBG(TRACE, ("E_BUSY error"));
-+        return ERROR_CODE(E_BUSY);
-+
-+        default:
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_MatchTableModifyKey(t_Handle h_CcNode, uint16_t keyIndex,
-+                                   uint8_t keySize, uint8_t *p_Key,
-+                                   uint8_t *p_Mask)
-+{
-+    t_FmPcd *p_FmPcd;
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_CcNode, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Key, E_NULL_POINTER);
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->h_Hc, E_INVALID_HANDLE);
-+
-+
-+    if (!FmPcdLockTryLockAll(p_FmPcd))
-+    {
-+        DBG(TRACE, ("FmPcdLockTryLockAll failed"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = FmPcdCcModifyKey(p_FmPcd, p_CcNode, keyIndex, keySize, p_Key, p_Mask);
-+
-+    FmPcdLockUnlockAll(p_FmPcd);
-+
-+    switch(GET_ERROR_TYPE(err)
-+)    {
-+        case E_OK:
-+        return E_OK;
-+
-+        case E_BUSY:
-+        DBG(TRACE, ("E_BUSY error"));
-+        return ERROR_CODE(E_BUSY);
-+
-+        default:
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+}
-+
-+t_Error FM_PCD_MatchTableModifyNextEngine(
-+        t_Handle h_CcNode, uint16_t keyIndex,
-+        t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams)
-+{
-+    t_FmPcd *p_FmPcd;
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcdCcNextEngineParams, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_CcNode, E_INVALID_HANDLE);
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->h_Hc, E_INVALID_HANDLE);
-+
-+    if (!FmPcdLockTryLockAll(p_FmPcd))
-+    {
-+        DBG(TRACE, ("FmPcdLockTryLockAll failed"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = ModifyNextEngineParamNode(p_FmPcd, p_CcNode, keyIndex,
-+                                    p_FmPcdCcNextEngineParams);
-+
-+    FmPcdLockUnlockAll(p_FmPcd);
-+
-+    switch(GET_ERROR_TYPE(err)
-+)    {
-+        case E_OK:
-+        return E_OK;
-+
-+        case E_BUSY:
-+        DBG(TRACE, ("E_BUSY error"));
-+        return ERROR_CODE(E_BUSY);
-+
-+        default:
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+}
-+
-+t_Error FM_PCD_MatchTableModifyMissNextEngine(
-+        t_Handle h_CcNode, t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams)
-+{
-+    t_FmPcd *p_FmPcd;
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcdCcNextEngineParams, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_CcNode, E_INVALID_HANDLE);
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->h_Hc, E_INVALID_HANDLE);
-+
-+    if (!FmPcdLockTryLockAll(p_FmPcd))
-+    {
-+        DBG(TRACE, ("FmPcdLockTryLockAll failed"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = FmPcdCcModifyMissNextEngineParamNode(p_FmPcd, p_CcNode,
-+                                               p_FmPcdCcNextEngineParams);
-+
-+    FmPcdLockUnlockAll(p_FmPcd);
-+
-+    switch(GET_ERROR_TYPE(err)
-+)    {
-+        case E_OK:
-+        return E_OK;
-+
-+        case E_BUSY:
-+        DBG(TRACE, ("E_BUSY error"));
-+        return ERROR_CODE(E_BUSY);
-+
-+        default:
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+}
-+
-+t_Error FM_PCD_MatchTableModifyKeyAndNextEngine(t_Handle h_CcNode,
-+                                                uint16_t keyIndex,
-+                                                uint8_t keySize,
-+                                                t_FmPcdCcKeyParams *p_KeyParams)
-+{
-+    t_FmPcd *p_FmPcd;
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_KeyParams, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_CcNode, E_INVALID_HANDLE);
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->h_Hc, E_INVALID_HANDLE);
-+
-+    if (!FmPcdLockTryLockAll(p_FmPcd))
-+    {
-+        DBG(TRACE, ("FmPcdLockTryLockAll failed"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = FmPcdCcModifyKeyAndNextEngine(p_FmPcd, p_CcNode, keyIndex, keySize,
-+                                        p_KeyParams);
-+
-+    FmPcdLockUnlockAll(p_FmPcd);
-+
-+    switch(GET_ERROR_TYPE(err)
-+)    {
-+        case E_OK:
-+        return E_OK;
-+
-+        case E_BUSY:
-+        DBG(TRACE, ("E_BUSY error"));
-+        return ERROR_CODE(E_BUSY);
-+
-+        default:
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+}
-+
-+t_Error FM_PCD_MatchTableFindNRemoveKey(t_Handle h_CcNode, uint8_t keySize,
-+                                        uint8_t *p_Key, uint8_t *p_Mask)
-+{
-+    t_FmPcd *p_FmPcd;
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    uint16_t keyIndex;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Key, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_CcNode, E_INVALID_HANDLE);
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->h_Hc, E_INVALID_HANDLE);
-+
-+    if (!FmPcdLockTryLockAll(p_FmPcd))
-+    {
-+        DBG(TRACE, ("FmPcdLockTryLockAll failed"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = FindKeyIndex(p_CcNode, keySize, p_Key, p_Mask, &keyIndex);
-+    if (GET_ERROR_TYPE(err) != E_OK)
-+    {
-+        FmPcdLockUnlockAll(p_FmPcd);
-+        RETURN_ERROR(
-+                MAJOR,
-+                err,
-+                ("The received key and mask pair was not found in the match table of the provided node"));
-+    }
-+
-+    err = FmPcdCcRemoveKey(p_FmPcd, p_CcNode, keyIndex);
-+
-+    FmPcdLockUnlockAll(p_FmPcd);
-+
-+    switch(GET_ERROR_TYPE(err)
-+)    {
-+        case E_OK:
-+        return E_OK;
-+
-+        case E_BUSY:
-+        DBG(TRACE, ("E_BUSY error"));
-+        return ERROR_CODE(E_BUSY);
-+
-+        default:
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+}
-+
-+t_Error FM_PCD_MatchTableFindNModifyNextEngine(
-+        t_Handle h_CcNode, uint8_t keySize, uint8_t *p_Key, uint8_t *p_Mask,
-+        t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams)
-+{
-+    t_FmPcd *p_FmPcd;
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    uint16_t keyIndex;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Key, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcdCcNextEngineParams, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_CcNode, E_INVALID_HANDLE);
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->h_Hc, E_INVALID_HANDLE);
-+
-+    if (!FmPcdLockTryLockAll(p_FmPcd))
-+    {
-+        DBG(TRACE, ("FmPcdLockTryLockAll failed"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = FindKeyIndex(p_CcNode, keySize, p_Key, p_Mask, &keyIndex);
-+    if (GET_ERROR_TYPE(err) != E_OK)
-+    {
-+        FmPcdLockUnlockAll(p_FmPcd);
-+        RETURN_ERROR(
-+                MAJOR,
-+                err,
-+                ("The received key and mask pair was not found in the match table of the provided node"));
-+    }
-+
-+    err = ModifyNextEngineParamNode(p_FmPcd, p_CcNode, keyIndex,
-+                                    p_FmPcdCcNextEngineParams);
-+
-+    FmPcdLockUnlockAll(p_FmPcd);
-+
-+    switch(GET_ERROR_TYPE(err)
-+)    {
-+        case E_OK:
-+        return E_OK;
-+
-+        case E_BUSY:
-+        DBG(TRACE, ("E_BUSY error"));
-+        return ERROR_CODE(E_BUSY);
-+
-+        default:
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+}
-+
-+t_Error FM_PCD_MatchTableFindNModifyKeyAndNextEngine(
-+        t_Handle h_CcNode, uint8_t keySize, uint8_t *p_Key, uint8_t *p_Mask,
-+        t_FmPcdCcKeyParams *p_KeyParams)
-+{
-+    t_FmPcd *p_FmPcd;
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    uint16_t keyIndex;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Key, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_KeyParams, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_CcNode, E_INVALID_HANDLE);
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->h_Hc, E_INVALID_HANDLE);
-+
-+    if (!FmPcdLockTryLockAll(p_FmPcd))
-+    {
-+        DBG(TRACE, ("FmPcdLockTryLockAll failed"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = FindKeyIndex(p_CcNode, keySize, p_Key, p_Mask, &keyIndex);
-+    if (GET_ERROR_TYPE(err) != E_OK)
-+    {
-+        FmPcdLockUnlockAll(p_FmPcd);
-+        RETURN_ERROR(
-+                MAJOR,
-+                err,
-+                ("The received key and mask pair was not found in the match table of the provided node"));
-+    }
-+
-+    err = FmPcdCcModifyKeyAndNextEngine(p_FmPcd, h_CcNode, keyIndex, keySize,
-+                                        p_KeyParams);
-+
-+    FmPcdLockUnlockAll(p_FmPcd);
-+
-+    switch(GET_ERROR_TYPE(err)
-+)    {
-+        case E_OK:
-+        return E_OK;
-+
-+        case E_BUSY:
-+        DBG(TRACE, ("E_BUSY error"));
-+        return ERROR_CODE(E_BUSY);
-+
-+        default:
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+}
-+
-+t_Error FM_PCD_MatchTableFindNModifyKey(t_Handle h_CcNode, uint8_t keySize,
-+                                        uint8_t *p_Key, uint8_t *p_Mask,
-+                                        uint8_t *p_NewKey, uint8_t *p_NewMask)
-+{
-+    t_FmPcd *p_FmPcd;
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    t_List h_List;
-+    uint16_t keyIndex;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Key, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_NewKey, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_CcNode, E_INVALID_HANDLE);
-+    p_FmPcd = (t_FmPcd *)p_CcNode->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->h_Hc, E_INVALID_HANDLE);
-+
-+    INIT_LIST(&h_List);
-+
-+    err = FmPcdCcNodeTreeTryLock(p_FmPcd, p_CcNode, &h_List);
-+    if (err)
-+    {
-+        DBG(TRACE, ("Node's trees lock failed"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = FindKeyIndex(p_CcNode, keySize, p_Key, p_Mask, &keyIndex);
-+    if (GET_ERROR_TYPE(err) != E_OK)
-+    {
-+        FmPcdCcNodeTreeReleaseLock(p_FmPcd, &h_List);
-+        RETURN_ERROR(MAJOR, err,
-+                     ("The received key and mask pair was not found in the "
-+                     "match table of the provided node"));
-+    }
-+
-+    err = FmPcdCcModifyKey(p_FmPcd, p_CcNode, keyIndex, keySize, p_NewKey,
-+                           p_NewMask);
-+
-+    FmPcdCcNodeTreeReleaseLock(p_FmPcd, &h_List);
-+
-+    switch(GET_ERROR_TYPE(err)
-+)    {
-+        case E_OK:
-+        return E_OK;
-+
-+        case E_BUSY:
-+        DBG(TRACE, ("E_BUSY error"));
-+        return ERROR_CODE(E_BUSY);
-+
-+        default:
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+}
-+
-+t_Error FM_PCD_MatchTableGetNextEngine(
-+        t_Handle h_CcNode, uint16_t keyIndex,
-+        t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_CcNode, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcdCcNextEngineParams, E_NULL_POINTER);
-+
-+    if (keyIndex >= p_CcNode->numOfKeys)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                     ("keyIndex exceeds current number of keys"));
-+
-+    if (keyIndex > (FM_PCD_MAX_NUM_OF_KEYS - 1))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("keyIndex can not be larger than %d", (FM_PCD_MAX_NUM_OF_KEYS - 1)));
-+
-+    memcpy(p_FmPcdCcNextEngineParams,
-+           &p_CcNode->keyAndNextEngineParams[keyIndex].nextEngineParams,
-+           sizeof(t_FmPcdCcNextEngineParams));
-+
-+    return E_OK;
-+}
-+
-+
-+uint32_t FM_PCD_MatchTableGetKeyCounter(t_Handle h_CcNode, uint16_t keyIndex)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    uint32_t *p_StatsCounters, frameCount;
-+    uint32_t intFlags;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_CcNode, E_INVALID_HANDLE, 0);
-+
-+    if (p_CcNode->statisticsMode == e_FM_PCD_CC_STATS_MODE_NONE)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Statistics were not enabled for this match table"));
-+        return 0;
-+    }
-+
-+    if ((p_CcNode->statisticsMode != e_FM_PCD_CC_STATS_MODE_FRAME)
-+            && (p_CcNode->statisticsMode
-+                    != e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME))
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Frame count is not supported in the statistics mode of this match table"));
-+        return 0;
-+    }
-+
-+    intFlags = XX_LockIntrSpinlock(p_CcNode->h_Spinlock);
-+
-+    if (keyIndex >= p_CcNode->numOfKeys)
-+    {
-+        XX_UnlockIntrSpinlock(p_CcNode->h_Spinlock, intFlags);
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("The provided keyIndex exceeds the number of keys in this match table"));
-+        return 0;
-+    }
-+
-+    if (!p_CcNode->keyAndNextEngineParams[keyIndex].p_StatsObj)
-+    {
-+        XX_UnlockIntrSpinlock(p_CcNode->h_Spinlock, intFlags);
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Statistics were not enabled for this key"));
-+        return 0;
-+    }
-+
-+    p_StatsCounters =
-+            p_CcNode->keyAndNextEngineParams[keyIndex].p_StatsObj->h_StatsCounters;
-+    ASSERT_COND(p_StatsCounters);
-+
-+    /* The first counter is byte counter, so we need to advance to the next counter */
-+    frameCount = GET_UINT32(*(uint32_t *)(PTR_MOVE(p_StatsCounters,
-+                            FM_PCD_CC_STATS_COUNTER_SIZE)));
-+
-+    XX_UnlockIntrSpinlock(p_CcNode->h_Spinlock, intFlags);
-+
-+    return frameCount;
-+}
-+
-+t_Error FM_PCD_MatchTableGetKeyStatistics(
-+        t_Handle h_CcNode, uint16_t keyIndex,
-+        t_FmPcdCcKeyStatistics *p_KeyStatistics)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    uint32_t intFlags;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_CcNode, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_KeyStatistics, E_NULL_POINTER);
-+
-+    intFlags = XX_LockIntrSpinlock(p_CcNode->h_Spinlock);
-+
-+    if (keyIndex >= p_CcNode->numOfKeys)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_STATE,
-+                ("The provided keyIndex exceeds the number of keys in this match table"));
-+
-+    err = MatchTableGetKeyStatistics(p_CcNode, keyIndex, p_KeyStatistics);
-+
-+    XX_UnlockIntrSpinlock(p_CcNode->h_Spinlock, intFlags);
-+
-+    if (err != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_MatchTableGetMissStatistics(
-+        t_Handle h_CcNode, t_FmPcdCcKeyStatistics *p_MissStatistics)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    uint32_t intFlags;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_CcNode, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_MissStatistics, E_NULL_POINTER);
-+
-+    intFlags = XX_LockIntrSpinlock(p_CcNode->h_Spinlock);
-+
-+    err = MatchTableGetKeyStatistics(p_CcNode, p_CcNode->numOfKeys,
-+                                     p_MissStatistics);
-+
-+    XX_UnlockIntrSpinlock(p_CcNode->h_Spinlock, intFlags);
-+
-+    if (err != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_MatchTableFindNGetKeyStatistics(
-+        t_Handle h_CcNode, uint8_t keySize, uint8_t *p_Key, uint8_t *p_Mask,
-+        t_FmPcdCcKeyStatistics *p_KeyStatistics)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    uint16_t keyIndex;
-+    uint32_t intFlags;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Key, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_KeyStatistics, E_NULL_POINTER);
-+
-+    intFlags = XX_LockIntrSpinlock(p_CcNode->h_Spinlock);
-+
-+    err = FindKeyIndex(p_CcNode, keySize, p_Key, p_Mask, &keyIndex);
-+    if (GET_ERROR_TYPE(err) != E_OK)
-+    {
-+        XX_UnlockIntrSpinlock(p_CcNode->h_Spinlock, intFlags);
-+        RETURN_ERROR(MAJOR, err,
-+                     ("The received key and mask pair was not found in the "
-+                     "match table of the provided node"));
-+    }
-+
-+    ASSERT_COND(keyIndex < p_CcNode->numOfKeys);
-+
-+    err = MatchTableGetKeyStatistics(p_CcNode, keyIndex, p_KeyStatistics);
-+
-+    XX_UnlockIntrSpinlock(p_CcNode->h_Spinlock, intFlags);
-+
-+    if (err != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_MatchTableGetIndexedHashBucket(t_Handle h_CcNode,
-+                                              uint8_t keySize, uint8_t *p_Key,
-+                                              uint8_t hashShift,
-+                                              t_Handle *p_CcNodeBucketHandle,
-+                                              uint8_t *p_BucketIndex,
-+                                              uint16_t *p_LastIndex)
-+{
-+    t_FmPcdCcNode *p_CcNode = (t_FmPcdCcNode *)h_CcNode;
-+    uint16_t glblMask;
-+    uint64_t crc64 = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_CcNode, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(
-+            p_CcNode->parseCode == CC_PC_GENERIC_IC_HASH_INDEXED,
-+            E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_Key, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_CcNodeBucketHandle, E_NULL_POINTER);
-+
-+    memcpy(&glblMask, PTR_MOVE(p_CcNode->p_GlblMask, 2), 2);
-+    be16_to_cpus(&glblMask);
-+
-+    crc64 = crc64_init();
-+    crc64 = crc64_compute(p_Key, keySize, crc64);
-+    crc64 >>= hashShift;
-+
-+    *p_BucketIndex = (uint8_t)(((crc64 >> (8 * (6 - p_CcNode->userOffset)))
-+            & glblMask) >> 4);
-+    if (*p_BucketIndex >= p_CcNode->numOfKeys)
-+        RETURN_ERROR(MINOR, E_NOT_IN_RANGE, ("bucket index!"));
-+
-+    *p_CcNodeBucketHandle =
-+            p_CcNode->keyAndNextEngineParams[*p_BucketIndex].nextEngineParams.params.ccParams.h_CcNode;
-+    if (!*p_CcNodeBucketHandle)
-+        RETURN_ERROR(MINOR, E_NOT_FOUND, ("bucket!"));
-+
-+    *p_LastIndex = ((t_FmPcdCcNode *)*p_CcNodeBucketHandle)->numOfKeys;
-+
-+    return E_OK;
-+}
-+
-+t_Handle FM_PCD_HashTableSet(t_Handle h_FmPcd, t_FmPcdHashTableParams *p_Param)
-+{
-+    t_FmPcdCcNode *p_CcNodeHashTbl;
-+    t_FmPcdCcNodeParams *p_IndxHashCcNodeParam, *p_ExactMatchCcNodeParam;
-+    t_FmPcdCcNode *p_CcNode;
-+    t_Handle h_MissStatsCounters = NULL;
-+    t_FmPcdCcKeyParams *p_HashKeyParams;
-+    int i;
-+    uint16_t numOfSets, numOfWays, countMask, onesCount = 0;
-+    bool statsEnForMiss = FALSE;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmPcd, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(p_Param, E_NULL_POINTER, NULL);
-+
-+    if (p_Param->maxNumOfKeys == 0)
-+    {
-+        REPORT_ERROR(MINOR, E_INVALID_VALUE, ("Max number of keys must be higher then 0"));
-+        return NULL;
-+    }
-+
-+    if (p_Param->hashResMask == 0)
-+    {
-+        REPORT_ERROR(MINOR, E_INVALID_VALUE, ("Hash result mask must differ from 0"));
-+        return NULL;
-+    }
-+
-+    /*Fix: QorIQ SDK / QSDK-2131*/
-+    if (p_Param->ccNextEngineParamsForMiss.nextEngine == e_FM_PCD_INVALID)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Next PCD Engine for on-miss entry is invalid. On-miss entry is always required. You can use e_FM_PCD_DONE."));
-+        return NULL;
-+    }
-+
-+#if (DPAA_VERSION >= 11)
-+    if (p_Param->statisticsMode == e_FM_PCD_CC_STATS_MODE_RMON)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE,
-+                ("RMON statistics mode is not supported for hash table"));
-+        return NULL;
-+    }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    p_ExactMatchCcNodeParam = (t_FmPcdCcNodeParams*)XX_Malloc(
-+            sizeof(t_FmPcdCcNodeParams));
-+    if (!p_ExactMatchCcNodeParam)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("p_ExactMatchCcNodeParam"));
-+        return NULL;
-+    }
-+    memset(p_ExactMatchCcNodeParam, 0, sizeof(t_FmPcdCcNodeParams));
-+
-+    p_IndxHashCcNodeParam = (t_FmPcdCcNodeParams*)XX_Malloc(
-+            sizeof(t_FmPcdCcNodeParams));
-+    if (!p_IndxHashCcNodeParam)
-+    {
-+        XX_Free(p_ExactMatchCcNodeParam);
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("p_IndxHashCcNodeParam"));
-+        return NULL;
-+    }
-+    memset(p_IndxHashCcNodeParam, 0, sizeof(t_FmPcdCcNodeParams));
-+
-+    /* Calculate number of sets and number of ways of the hash table */
-+    countMask = (uint16_t)(p_Param->hashResMask >> 4);
-+    while (countMask)
-+    {
-+        onesCount++;
-+        countMask = (uint16_t)(countMask >> 1);
-+    }
-+
-+    numOfSets = (uint16_t)(1 << onesCount);
-+    numOfWays = (uint16_t)DIV_CEIL(p_Param->maxNumOfKeys, numOfSets);
-+
-+    if (p_Param->maxNumOfKeys % numOfSets)
-+        DBG(INFO, ("'maxNumOfKeys' is not a multiple of hash number of ways, so number of ways will be rounded up"));
-+
-+    if ((p_Param->statisticsMode == e_FM_PCD_CC_STATS_MODE_FRAME)
-+            || (p_Param->statisticsMode == e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME))
-+    {
-+        /* Allocating a statistics counters table that will be used by all
-+         'miss' entries of the hash table */
-+        h_MissStatsCounters = (t_Handle)FM_MURAM_AllocMem(
-+                FmPcdGetMuramHandle(h_FmPcd), 2 * FM_PCD_CC_STATS_COUNTER_SIZE,
-+                FM_PCD_CC_AD_TABLE_ALIGN);
-+        if (!h_MissStatsCounters)
-+        {
-+            REPORT_ERROR(MAJOR, E_NO_MEMORY, ("MURAM allocation for statistics table for hash miss"));
-+            XX_Free(p_IndxHashCcNodeParam);
-+            XX_Free(p_ExactMatchCcNodeParam);
-+            return NULL;
-+        }
-+        memset(h_MissStatsCounters, 0, (2 * FM_PCD_CC_STATS_COUNTER_SIZE));
-+
-+        /* Always enable statistics for 'miss', so that a statistics AD will be
-+         initialized from the start. We'll store the requested 'statistics enable'
-+         value and it will be used when statistics are read by the user. */
-+        statsEnForMiss = p_Param->ccNextEngineParamsForMiss.statisticsEn;
-+        p_Param->ccNextEngineParamsForMiss.statisticsEn = TRUE;
-+    }
-+
-+    /* Building exact-match node params, will be used to create the hash buckets */
-+    p_ExactMatchCcNodeParam->extractCcParams.type = e_FM_PCD_EXTRACT_NON_HDR;
-+
-+    p_ExactMatchCcNodeParam->extractCcParams.extractNonHdr.src =
-+            e_FM_PCD_EXTRACT_FROM_KEY;
-+    p_ExactMatchCcNodeParam->extractCcParams.extractNonHdr.action =
-+            e_FM_PCD_ACTION_EXACT_MATCH;
-+    p_ExactMatchCcNodeParam->extractCcParams.extractNonHdr.offset = 0;
-+    p_ExactMatchCcNodeParam->extractCcParams.extractNonHdr.size =
-+            p_Param->matchKeySize;
-+
-+    p_ExactMatchCcNodeParam->keysParams.maxNumOfKeys = numOfWays;
-+    p_ExactMatchCcNodeParam->keysParams.maskSupport = FALSE;
-+    p_ExactMatchCcNodeParam->keysParams.statisticsMode =
-+            p_Param->statisticsMode;
-+    p_ExactMatchCcNodeParam->keysParams.numOfKeys = 0;
-+    p_ExactMatchCcNodeParam->keysParams.keySize = p_Param->matchKeySize;
-+    p_ExactMatchCcNodeParam->keysParams.ccNextEngineParamsForMiss =
-+            p_Param->ccNextEngineParamsForMiss;
-+
-+    p_HashKeyParams = p_IndxHashCcNodeParam->keysParams.keyParams;
-+
-+    for (i = 0; i < numOfSets; i++)
-+    {
-+        /* Each exact-match node will be marked as a 'bucket' and provided with
-+           a pointer to statistics counters, to be used for 'miss' entry
-+           statistics */
-+        p_CcNode = (t_FmPcdCcNode *)XX_Malloc(sizeof(t_FmPcdCcNode));
-+        if (!p_CcNode)
-+            break;
-+        memset(p_CcNode, 0, sizeof(t_FmPcdCcNode));
-+
-+        p_CcNode->isHashBucket = TRUE;
-+        p_CcNode->h_MissStatsCounters = h_MissStatsCounters;
-+
-+        err = MatchTableSet(h_FmPcd, p_CcNode, p_ExactMatchCcNodeParam);
-+        if (err)
-+            break;
-+
-+        p_HashKeyParams[i].ccNextEngineParams.nextEngine = e_FM_PCD_CC;
-+        p_HashKeyParams[i].ccNextEngineParams.statisticsEn = FALSE;
-+        p_HashKeyParams[i].ccNextEngineParams.params.ccParams.h_CcNode =
-+                p_CcNode;
-+    }
-+
-+    if (i < numOfSets)
-+    {
-+        for (i = i - 1; i >= 0; i--)
-+            FM_PCD_MatchTableDelete(
-+                    p_HashKeyParams[i].ccNextEngineParams.params.ccParams.h_CcNode);
-+
-+        FM_MURAM_FreeMem(FmPcdGetMuramHandle(h_FmPcd), h_MissStatsCounters);
-+
-+        REPORT_ERROR(MAJOR, E_NULL_POINTER, NO_MSG);
-+        XX_Free(p_IndxHashCcNodeParam);
-+        XX_Free(p_ExactMatchCcNodeParam);
-+        return NULL;
-+    }
-+
-+    /* Creating indexed-hash CC node */
-+    p_IndxHashCcNodeParam->extractCcParams.type = e_FM_PCD_EXTRACT_NON_HDR;
-+    p_IndxHashCcNodeParam->extractCcParams.extractNonHdr.src =
-+            e_FM_PCD_EXTRACT_FROM_HASH;
-+    p_IndxHashCcNodeParam->extractCcParams.extractNonHdr.action =
-+            e_FM_PCD_ACTION_INDEXED_LOOKUP;
-+    p_IndxHashCcNodeParam->extractCcParams.extractNonHdr.icIndxMask =
-+            p_Param->hashResMask;
-+    p_IndxHashCcNodeParam->extractCcParams.extractNonHdr.offset =
-+            p_Param->hashShift;
-+    p_IndxHashCcNodeParam->extractCcParams.extractNonHdr.size = 2;
-+
-+    p_IndxHashCcNodeParam->keysParams.maxNumOfKeys = numOfSets;
-+    p_IndxHashCcNodeParam->keysParams.maskSupport = FALSE;
-+    p_IndxHashCcNodeParam->keysParams.statisticsMode =
-+            e_FM_PCD_CC_STATS_MODE_NONE;
-+    /* Number of keys of this node is number of sets of the hash */
-+    p_IndxHashCcNodeParam->keysParams.numOfKeys = numOfSets;
-+    p_IndxHashCcNodeParam->keysParams.keySize = 2;
-+
-+    p_CcNodeHashTbl = FM_PCD_MatchTableSet(h_FmPcd, p_IndxHashCcNodeParam);
-+
-+    if (p_CcNodeHashTbl)
-+    {
-+        p_CcNodeHashTbl->kgHashShift = p_Param->kgHashShift;
-+
-+        /* Storing the allocated counters for buckets 'miss' in the hash table
-+         and if statistics for miss were enabled. */
-+        p_CcNodeHashTbl->h_MissStatsCounters = h_MissStatsCounters;
-+        p_CcNodeHashTbl->statsEnForMiss = statsEnForMiss;
-+    }
-+
-+    XX_Free(p_IndxHashCcNodeParam);
-+    XX_Free(p_ExactMatchCcNodeParam);
-+
-+    return p_CcNodeHashTbl;
-+}
-+
-+t_Error FM_PCD_HashTableDelete(t_Handle h_HashTbl)
-+{
-+    t_FmPcdCcNode *p_HashTbl = (t_FmPcdCcNode *)h_HashTbl;
-+    t_Handle h_FmPcd;
-+    t_Handle *p_HashBuckets, h_MissStatsCounters;
-+    uint16_t i, numOfBuckets;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_HashTbl, E_INVALID_HANDLE);
-+
-+    /* Store all hash buckets before the hash is freed */
-+    numOfBuckets = p_HashTbl->numOfKeys;
-+
-+    p_HashBuckets = (t_Handle *)XX_Malloc(numOfBuckets * sizeof(t_Handle));
-+    if (!p_HashBuckets)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+
-+    for (i = 0; i < numOfBuckets; i++)
-+        p_HashBuckets[i] =
-+                p_HashTbl->keyAndNextEngineParams[i].nextEngineParams.params.ccParams.h_CcNode;
-+
-+    h_FmPcd = p_HashTbl->h_FmPcd;
-+    h_MissStatsCounters = p_HashTbl->h_MissStatsCounters;
-+
-+    /* Free the hash */
-+    err = FM_PCD_MatchTableDelete(p_HashTbl);
-+
-+    /* Free each hash bucket */
-+    for (i = 0; i < numOfBuckets; i++)
-+        err |= FM_PCD_MatchTableDelete(p_HashBuckets[i]);
-+
-+    XX_Free(p_HashBuckets);
-+
-+    /* Free statistics counters for 'miss', if these were allocated */
-+    if (h_MissStatsCounters)
-+        FM_MURAM_FreeMem(FmPcdGetMuramHandle(h_FmPcd), h_MissStatsCounters);
-+
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_HashTableAddKey(t_Handle h_HashTbl, uint8_t keySize,
-+                               t_FmPcdCcKeyParams *p_KeyParams)
-+{
-+    t_FmPcdCcNode *p_HashTbl = (t_FmPcdCcNode *)h_HashTbl;
-+    t_Handle h_HashBucket;
-+    uint8_t bucketIndex;
-+    uint16_t lastIndex;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_HashTbl, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_KeyParams, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_KeyParams->p_Key, E_NULL_POINTER);
-+
-+    if (p_KeyParams->p_Mask)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("Keys masks not supported for hash table"));
-+
-+    err = FM_PCD_MatchTableGetIndexedHashBucket(p_HashTbl, keySize,
-+                                                p_KeyParams->p_Key,
-+                                                p_HashTbl->kgHashShift,
-+                                                &h_HashBucket, &bucketIndex,
-+                                                &lastIndex);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    return FM_PCD_MatchTableAddKey(h_HashBucket, FM_PCD_LAST_KEY_INDEX, keySize,
-+                                   p_KeyParams);
-+}
-+
-+t_Error FM_PCD_HashTableRemoveKey(t_Handle h_HashTbl, uint8_t keySize,
-+                                  uint8_t *p_Key)
-+{
-+    t_FmPcdCcNode *p_HashTbl = (t_FmPcdCcNode *)h_HashTbl;
-+    t_Handle h_HashBucket;
-+    uint8_t bucketIndex;
-+    uint16_t lastIndex;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_HashTbl, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Key, E_NULL_POINTER);
-+
-+    err = FM_PCD_MatchTableGetIndexedHashBucket(p_HashTbl, keySize, p_Key,
-+                                                p_HashTbl->kgHashShift,
-+                                                &h_HashBucket, &bucketIndex,
-+                                                &lastIndex);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    return FM_PCD_MatchTableFindNRemoveKey(h_HashBucket, keySize, p_Key, NULL);
-+}
-+
-+t_Error FM_PCD_HashTableModifyNextEngine(
-+        t_Handle h_HashTbl, uint8_t keySize, uint8_t *p_Key,
-+        t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams)
-+{
-+    t_FmPcdCcNode *p_HashTbl = (t_FmPcdCcNode *)h_HashTbl;
-+    t_Handle h_HashBucket;
-+    uint8_t bucketIndex;
-+    uint16_t lastIndex;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_HashTbl, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Key, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcdCcNextEngineParams, E_NULL_POINTER);
-+
-+    err = FM_PCD_MatchTableGetIndexedHashBucket(p_HashTbl, keySize, p_Key,
-+                                                p_HashTbl->kgHashShift,
-+                                                &h_HashBucket, &bucketIndex,
-+                                                &lastIndex);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    return FM_PCD_MatchTableFindNModifyNextEngine(h_HashBucket, keySize, p_Key,
-+                                                  NULL,
-+                                                  p_FmPcdCcNextEngineParams);
-+}
-+
-+t_Error FM_PCD_HashTableModifyMissNextEngine(
-+        t_Handle h_HashTbl,
-+        t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams)
-+{
-+    t_FmPcdCcNode *p_HashTbl = (t_FmPcdCcNode *)h_HashTbl;
-+    t_Handle h_HashBucket;
-+    uint8_t i;
-+    bool nullifyMissStats = FALSE;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_HashTbl, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcdCcNextEngineParams, E_NULL_POINTER);
-+
-+    if ((!p_HashTbl->h_MissStatsCounters)
-+            && (p_FmPcdCcNextEngineParams->statisticsEn))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_CONFLICT,
-+                ("Statistics are requested for a key, but statistics mode was set"
-+                "to 'NONE' upon initialization"));
-+
-+    if (p_HashTbl->h_MissStatsCounters)
-+    {
-+        if ((!p_HashTbl->statsEnForMiss)
-+                && (p_FmPcdCcNextEngineParams->statisticsEn))
-+            nullifyMissStats = TRUE;
-+
-+        if ((p_HashTbl->statsEnForMiss)
-+                && (!p_FmPcdCcNextEngineParams->statisticsEn))
-+        {
-+            p_HashTbl->statsEnForMiss = FALSE;
-+            p_FmPcdCcNextEngineParams->statisticsEn = TRUE;
-+        }
-+    }
-+
-+    for (i = 0; i < p_HashTbl->numOfKeys; i++)
-+    {
-+        h_HashBucket =
-+                p_HashTbl->keyAndNextEngineParams[i].nextEngineParams.params.ccParams.h_CcNode;
-+
-+        err = FM_PCD_MatchTableModifyMissNextEngine(h_HashBucket,
-+                                                    p_FmPcdCcNextEngineParams);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    if (nullifyMissStats)
-+    {
-+        memset(p_HashTbl->h_MissStatsCounters, 0,
-+               (2 * FM_PCD_CC_STATS_COUNTER_SIZE));
-+        memset(p_HashTbl->h_MissStatsCounters, 0,
-+               (2 * FM_PCD_CC_STATS_COUNTER_SIZE));
-+        p_HashTbl->statsEnForMiss = TRUE;
-+    }
-+
-+    return E_OK;
-+}
-+
-+
-+t_Error FM_PCD_HashTableGetMissNextEngine(
-+        t_Handle h_HashTbl,
-+        t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams)
-+{
-+    t_FmPcdCcNode *p_HashTbl = (t_FmPcdCcNode *)h_HashTbl;
-+    t_FmPcdCcNode *p_HashBucket;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_HashTbl, E_INVALID_HANDLE);
-+
-+    /* Miss next engine of each bucket was initialized with the next engine of the hash table */
-+    p_HashBucket =
-+            p_HashTbl->keyAndNextEngineParams[0].nextEngineParams.params.ccParams.h_CcNode;
-+
-+    memcpy(p_FmPcdCcNextEngineParams,
-+           &p_HashBucket->keyAndNextEngineParams[p_HashBucket->numOfKeys].nextEngineParams,
-+           sizeof(t_FmPcdCcNextEngineParams));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_HashTableFindNGetKeyStatistics(
-+        t_Handle h_HashTbl, uint8_t keySize, uint8_t *p_Key,
-+        t_FmPcdCcKeyStatistics *p_KeyStatistics)
-+{
-+    t_FmPcdCcNode *p_HashTbl = (t_FmPcdCcNode *)h_HashTbl;
-+    t_Handle h_HashBucket;
-+    uint8_t bucketIndex;
-+    uint16_t lastIndex;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_HashTbl, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Key, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_KeyStatistics, E_NULL_POINTER);
-+
-+    err = FM_PCD_MatchTableGetIndexedHashBucket(p_HashTbl, keySize, p_Key,
-+                                                p_HashTbl->kgHashShift,
-+                                                &h_HashBucket, &bucketIndex,
-+                                                &lastIndex);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    return FM_PCD_MatchTableFindNGetKeyStatistics(h_HashBucket, keySize, p_Key,
-+                                                  NULL, p_KeyStatistics);
-+}
-+
-+t_Error FM_PCD_HashTableGetMissStatistics(
-+        t_Handle h_HashTbl, t_FmPcdCcKeyStatistics *p_MissStatistics)
-+{
-+    t_FmPcdCcNode *p_HashTbl = (t_FmPcdCcNode *)h_HashTbl;
-+    t_Handle h_HashBucket;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_HashTbl, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_MissStatistics, E_NULL_POINTER);
-+
-+    if (!p_HashTbl->statsEnForMiss)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                     ("Statistics were not enabled for miss"));
-+
-+    h_HashBucket =
-+            p_HashTbl->keyAndNextEngineParams[0].nextEngineParams.params.ccParams.h_CcNode;
-+
-+    return FM_PCD_MatchTableGetMissStatistics(h_HashBucket, p_MissStatistics);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_cc.h
-@@ -0,0 +1,399 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_cc.h
-+
-+ @Description   FM PCD CC ...
-+*//***************************************************************************/
-+#ifndef __FM_CC_H
-+#define __FM_CC_H
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "list_ext.h"
-+
-+#include "fm_pcd.h"
-+
-+
-+/***********************************************************************/
-+/*          Coarse classification defines                              */
-+/***********************************************************************/
-+
-+#define CC_MAX_NUM_OF_KEYS                  (FM_PCD_MAX_NUM_OF_KEYS + 1)
-+
-+#define CC_PC_FF_MACDST                     0x00
-+#define CC_PC_FF_MACSRC                     0x01
-+#define CC_PC_FF_ETYPE                      0x02
-+
-+#define CC_PC_FF_TCI1                       0x03
-+#define CC_PC_FF_TCI2                       0x04
-+
-+#define CC_PC_FF_MPLS1                      0x06
-+#define CC_PC_FF_MPLS_LAST                  0x07
-+
-+#define CC_PC_FF_IPV4DST1                   0x08
-+#define CC_PC_FF_IPV4DST2                   0x16
-+#define CC_PC_FF_IPV4IPTOS_TC1              0x09
-+#define CC_PC_FF_IPV4IPTOS_TC2              0x17
-+#define CC_PC_FF_IPV4PTYPE1                 0x0A
-+#define CC_PC_FF_IPV4PTYPE2                 0x18
-+#define CC_PC_FF_IPV4SRC1                   0x0b
-+#define CC_PC_FF_IPV4SRC2                   0x19
-+#define CC_PC_FF_IPV4SRC1_IPV4DST1          0x0c
-+#define CC_PC_FF_IPV4SRC2_IPV4DST2          0x1a
-+#define CC_PC_FF_IPV4TTL                    0x29
-+
-+
-+#define CC_PC_FF_IPTOS_IPV6TC1_IPV6FLOW1    0x0d /*TODO - CLASS - what is it? TOS*/
-+#define CC_PC_FF_IPTOS_IPV6TC2_IPV6FLOW2    0x1b
-+#define CC_PC_FF_IPV6PTYPE1                 0x0e
-+#define CC_PC_FF_IPV6PTYPE2                 0x1c
-+#define CC_PC_FF_IPV6DST1                   0x0f
-+#define CC_PC_FF_IPV6DST2                   0x1d
-+#define CC_PC_FF_IPV6SRC1                   0x10
-+#define CC_PC_FF_IPV6SRC2                   0x1e
-+#define CC_PC_FF_IPV6HOP_LIMIT              0x2a
-+#define CC_PC_FF_IPPID                      0x24
-+#define CC_PC_FF_IPDSCP                     0x76
-+
-+#define CC_PC_FF_GREPTYPE                   0x11
-+
-+#define CC_PC_FF_MINENCAP_PTYPE             0x12
-+#define CC_PC_FF_MINENCAP_IPDST             0x13
-+#define CC_PC_FF_MINENCAP_IPSRC             0x14
-+#define CC_PC_FF_MINENCAP_IPSRC_IPDST       0x15
-+
-+#define CC_PC_FF_L4PSRC                     0x1f
-+#define CC_PC_FF_L4PDST                     0x20
-+#define CC_PC_FF_L4PSRC_L4PDST              0x21
-+
-+#define CC_PC_FF_PPPPID                     0x05
-+
-+#define CC_PC_PR_SHIM1                      0x22
-+#define CC_PC_PR_SHIM2                      0x23
-+
-+#define CC_PC_GENERIC_WITHOUT_MASK          0x27
-+#define CC_PC_GENERIC_WITH_MASK             0x28
-+#define CC_PC_GENERIC_IC_GMASK              0x2B
-+#define CC_PC_GENERIC_IC_HASH_INDEXED       0x2C
-+#define CC_PC_GENERIC_IC_AGING_MASK         0x2D
-+
-+#define CC_PR_OFFSET                        0x25
-+#define CC_PR_WITHOUT_OFFSET                0x26
-+
-+#define CC_PC_PR_ETH_OFFSET                 19
-+#define CC_PC_PR_USER_DEFINED_SHIM1_OFFSET  16
-+#define CC_PC_PR_USER_DEFINED_SHIM2_OFFSET  17
-+#define CC_PC_PR_USER_LLC_SNAP_OFFSET       20
-+#define CC_PC_PR_VLAN1_OFFSET               21
-+#define CC_PC_PR_VLAN2_OFFSET               22
-+#define CC_PC_PR_PPPOE_OFFSET               24
-+#define CC_PC_PR_MPLS1_OFFSET               25
-+#define CC_PC_PR_MPLS_LAST_OFFSET           26
-+#define CC_PC_PR_IP1_OFFSET                 27
-+#define CC_PC_PR_IP_LAST_OFFSET             28
-+#define CC_PC_PR_MINENC_OFFSET              28
-+#define CC_PC_PR_L4_OFFSET                  30
-+#define CC_PC_PR_GRE_OFFSET                 29
-+#define CC_PC_PR_ETYPE_LAST_OFFSET          23
-+#define CC_PC_PR_NEXT_HEADER_OFFSET         31
-+
-+#define CC_PC_ILLEGAL                       0xff
-+#define CC_SIZE_ILLEGAL                     0
-+
-+#define FM_PCD_CC_KEYS_MATCH_TABLE_ALIGN    16
-+#define FM_PCD_CC_AD_TABLE_ALIGN            16
-+#define FM_PCD_CC_AD_ENTRY_SIZE             16
-+#define FM_PCD_CC_NUM_OF_KEYS               255
-+#define FM_PCD_CC_TREE_ADDR_ALIGN           256
-+
-+#define FM_PCD_AD_RESULT_CONTRL_FLOW_TYPE   0x00000000
-+#define FM_PCD_AD_RESULT_DATA_FLOW_TYPE     0x80000000
-+#define FM_PCD_AD_RESULT_PLCR_DIS           0x20000000
-+#define FM_PCD_AD_RESULT_EXTENDED_MODE      0x80000000
-+#define FM_PCD_AD_RESULT_NADEN              0x20000000
-+#define FM_PCD_AD_RESULT_STATISTICS_EN      0x40000000
-+
-+#define FM_PCD_AD_CONT_LOOKUP_TYPE          0x40000000
-+#define FM_PCD_AD_CONT_LOOKUP_LCL_MASK      0x00800000
-+
-+#define FM_PCD_AD_STATS_TYPE                0x40000000
-+#define FM_PCD_AD_STATS_FLR_ADDR_MASK       0x00FFFFFF
-+#define FM_PCD_AD_STATS_COUNTERS_ADDR_MASK  0x00FFFFFF
-+#define FM_PCD_AD_STATS_NEXT_ACTION_MASK    0xFFFF0000
-+#define FM_PCD_AD_STATS_NEXT_ACTION_SHIFT   12
-+#define FM_PCD_AD_STATS_NAD_EN              0x00008000
-+#define FM_PCD_AD_STATS_OP_CODE             0x00000036
-+#define FM_PCD_AD_STATS_FLR_EN              0x00004000
-+#define FM_PCD_AD_STATS_COND_EN             0x00002000
-+
-+
-+
-+#define FM_PCD_AD_BYPASS_TYPE               0xc0000000
-+
-+#define FM_PCD_AD_TYPE_MASK                 0xc0000000
-+#define FM_PCD_AD_OPCODE_MASK               0x0000000f
-+
-+#define FM_PCD_AD_PROFILEID_FOR_CNTRL_SHIFT 16
-+#if (DPAA_VERSION >= 11)
-+#define FM_PCD_AD_RESULT_VSP_SHIFT           24
-+#define FM_PCD_AD_RESULT_NO_OM_VSPE          0x02000000
-+#define FM_PCD_AD_RESULT_VSP_MASK            0x3f
-+#define FM_PCD_AD_NCSPFQIDM_MASK             0x80000000
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+#define GLBL_MASK_FOR_HASH_INDEXED          0xfff00000
-+#define CC_GLBL_MASK_SIZE                   4
-+#define CC_AGING_MASK_SIZE                  4
-+
-+typedef uint32_t ccPrivateInfo_t; /**< private info of CC: */
-+
-+#define CC_PRIVATE_INFO_NONE                       0
-+#define CC_PRIVATE_INFO_IC_HASH_INDEX_LOOKUP       0x80000000
-+#define CC_PRIVATE_INFO_IC_HASH_EXACT_MATCH        0x40000000
-+#define CC_PRIVATE_INFO_IC_KEY_EXACT_MATCH         0x20000000
-+#define CC_PRIVATE_INFO_IC_DEQ_FQID_INDEX_LOOKUP   0x10000000
-+
-+#define CC_BUILD_AGING_MASK(numOfKeys)      ((((1LL << ((numOfKeys) + 1)) - 1)) << (31 - (numOfKeys)))
-+/***********************************************************************/
-+/*          Memory map                                                 */
-+/***********************************************************************/
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(push,1)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+typedef struct
-+{
-+    volatile uint32_t fqid;
-+    volatile uint32_t plcrProfile;
-+    volatile uint32_t nia;
-+    volatile uint32_t res;
-+} t_AdOfTypeResult;
-+
-+typedef struct
-+{
-+    volatile uint32_t ccAdBase;
-+    volatile uint32_t matchTblPtr;
-+    volatile uint32_t pcAndOffsets;
-+    volatile uint32_t gmask;
-+} t_AdOfTypeContLookup;
-+
-+typedef struct
-+{
-+    volatile uint32_t profileTableAddr;
-+    volatile uint32_t reserved;
-+    volatile uint32_t nextActionIndx;
-+    volatile uint32_t statsTableAddr;
-+} t_AdOfTypeStats;
-+
-+typedef union
-+{
-+    volatile t_AdOfTypeResult        adResult;
-+    volatile t_AdOfTypeContLookup    adContLookup;
-+} t_Ad;
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+
-+/***********************************************************************/
-+/*  Driver's internal structures                                       */
-+/***********************************************************************/
-+
-+typedef struct t_FmPcdStatsObj
-+{
-+    t_Handle        h_StatsAd;
-+    t_Handle        h_StatsCounters;
-+    t_List          node;
-+} t_FmPcdStatsObj;
-+
-+typedef struct
-+{
-+    uint8_t                     key[FM_PCD_MAX_SIZE_OF_KEY];
-+    uint8_t                     mask[FM_PCD_MAX_SIZE_OF_KEY];
-+
-+    t_FmPcdCcNextEngineParams   nextEngineParams;
-+    uint32_t                    requiredAction;
-+    uint32_t                    shadowAction;
-+
-+    t_FmPcdStatsObj             *p_StatsObj;
-+
-+} t_FmPcdCcKeyAndNextEngineParams;
-+
-+typedef struct
-+{
-+    t_Handle        p_Ad;
-+    e_FmPcdEngine   fmPcdEngine;
-+    bool            adAllocated;
-+    bool            isTree;
-+
-+    uint32_t        myInfo;
-+    t_List          *h_CcNextNodesLst;
-+    t_Handle        h_AdditionalInfo;
-+    t_Handle        h_Node;
-+} t_FmPcdModifyCcAdditionalParams;
-+
-+typedef struct
-+{
-+    t_Handle            p_AdTableNew;
-+    t_Handle            p_KeysMatchTableNew;
-+    t_Handle            p_AdTableOld;
-+    t_Handle            p_KeysMatchTableOld;
-+    uint16_t            numOfKeys;
-+    t_Handle            h_CurrentNode;
-+    uint16_t            savedKeyIndex;
-+    t_Handle            h_NodeForAdd;
-+    t_Handle            h_NodeForRmv;
-+    t_Handle            h_ManipForRmv;
-+    t_Handle            h_ManipForAdd;
-+    t_FmPcdStatsObj     *p_StatsObjForRmv;
-+#if (DPAA_VERSION >= 11)
-+    t_Handle            h_FrmReplicForAdd;
-+    t_Handle            h_FrmReplicForRmv;
-+#endif /* (DPAA_VERSION >= 11) */
-+    bool                tree;
-+
-+    t_FmPcdCcKeyAndNextEngineParams  keyAndNextEngineParams[CC_MAX_NUM_OF_KEYS];
-+} t_FmPcdModifyCcKeyAdditionalParams;
-+
-+typedef struct
-+{
-+    t_Handle    h_Manip;
-+    t_Handle    h_CcNode;
-+} t_CcNextEngineInfo;
-+
-+typedef struct
-+{
-+    uint16_t            numOfKeys;
-+    uint16_t            maxNumOfKeys;
-+
-+    bool                maskSupport;
-+    uint32_t            keysMatchTableMaxSize;
-+
-+    e_FmPcdCcStatsMode  statisticsMode;
-+    uint32_t            numOfStatsFLRs;
-+    uint32_t            countersArraySize;
-+
-+    bool                isHashBucket;               /**< Valid for match table node that is a bucket of a hash table only */
-+    t_Handle            h_MissStatsCounters;        /**< Valid for hash table node and match table that is a bucket;
-+                                                         Holds the statistics counters allocated by the hash table and
-+                                                         are shared by all hash table buckets; */
-+    t_Handle            h_PrivMissStatsCounters;    /**< Valid for match table node that is a bucket of a hash table only;
-+                                                         Holds the statistics counters that were allocated for this node
-+                                                         and replaced by the shared counters (allocated by the hash table); */
-+    bool                statsEnForMiss;             /**< Valid for hash table node only; TRUE is statistics are currently
-+                                                         enabled for hash 'miss', FALSE otherwise; This parameter effects the
-+                                                         returned statistics count to user, statistics AD always present for 'miss'
-+                                                         for all hash buckets; */
-+    bool                glblMaskUpdated;
-+    t_Handle            p_GlblMask;
-+    bool                lclMask;
-+    uint8_t             parseCode;
-+    uint8_t             offset;
-+    uint8_t             prsArrayOffset;
-+    bool                ctrlFlow;
-+    uint16_t            owners;
-+
-+    uint8_t             ccKeySizeAccExtraction;
-+    uint8_t             sizeOfExtraction;
-+    uint8_t             glblMaskSize;
-+
-+    t_Handle            h_KeysMatchTable;
-+    t_Handle            h_AdTable;
-+    t_Handle            h_StatsAds;
-+    t_Handle            h_TmpAd;
-+    t_Handle            h_Ad;
-+    t_Handle            h_StatsFLRs;
-+
-+    t_List              availableStatsLst;
-+
-+    t_List              ccPrevNodesLst;
-+
-+    t_List              ccTreeIdLst;
-+    t_List              ccTreesLst;
-+
-+    t_Handle            h_FmPcd;
-+    uint32_t            shadowAction;
-+    uint8_t             userSizeOfExtraction;
-+    uint8_t             userOffset;
-+    uint8_t             kgHashShift;            /* used in hash-table */
-+
-+    t_Handle            h_Spinlock;
-+
-+    t_FmPcdCcKeyAndNextEngineParams keyAndNextEngineParams[CC_MAX_NUM_OF_KEYS];
-+} t_FmPcdCcNode;
-+
-+typedef struct
-+{
-+    t_FmPcdCcNode       *p_FmPcdCcNode;
-+    bool                occupied;
-+    uint16_t            owners;
-+    volatile bool       lock;
-+} t_FmPcdCcNodeArray;
-+
-+typedef struct
-+{
-+    uint8_t             numOfEntriesInGroup;
-+    uint32_t            totalBitsMask;
-+    uint8_t             baseGroupEntry;
-+} t_FmPcdCcGroupParam;
-+
-+typedef struct
-+{
-+    t_Handle            h_FmPcd;
-+    uint8_t             netEnvId;
-+    uintptr_t           ccTreeBaseAddr;
-+    uint8_t             numOfGrps;
-+    t_FmPcdCcGroupParam fmPcdGroupParam[FM_PCD_MAX_NUM_OF_CC_GROUPS];
-+    t_List              fmPortsLst;
-+    t_FmPcdLock         *p_Lock;
-+    uint8_t             numOfEntries;
-+    uint16_t            owners;
-+    t_Handle            h_FmPcdCcSavedManipParams;
-+    bool                modifiedState;
-+    uint32_t            requiredAction;
-+    t_Handle            h_IpReassemblyManip;
-+    t_Handle            h_CapwapReassemblyManip;
-+
-+    t_FmPcdCcKeyAndNextEngineParams keyAndNextEngineParams[FM_PCD_MAX_NUM_OF_CC_GROUPS];
-+} t_FmPcdCcTree;
-+
-+
-+t_Error     FmPcdCcNodeTreeTryLock(t_Handle h_FmPcd,t_Handle h_FmPcdCcNode, t_List *p_List);
-+void        FmPcdCcNodeTreeReleaseLock(t_Handle h_FmPcd, t_List *p_List);
-+t_Error     FmPcdUpdateCcShadow (t_FmPcd *p_FmPcd, uint32_t size, uint32_t align);
-+
-+
-+#endif /* __FM_CC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.c
-@@ -0,0 +1,3242 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_kg.c
-+
-+ @Description   FM PCD ...
-+*//***************************************************************************/
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "string_ext.h"
-+#include "debug_ext.h"
-+#include "net_ext.h"
-+#include "fm_port_ext.h"
-+
-+#include "fm_common.h"
-+#include "fm_pcd.h"
-+#include "fm_hc.h"
-+#include "fm_pcd_ipc.h"
-+#include "fm_kg.h"
-+#include "fsl_fman_kg.h"
-+
-+
-+/****************************************/
-+/*       static functions               */
-+/****************************************/
-+
-+static uint32_t KgHwLock(t_Handle h_FmPcdKg)
-+{
-+    ASSERT_COND(h_FmPcdKg);
-+    return XX_LockIntrSpinlock(((t_FmPcdKg *)h_FmPcdKg)->h_HwSpinlock);
-+}
-+
-+static void KgHwUnlock(t_Handle h_FmPcdKg, uint32_t intFlags)
-+{
-+    ASSERT_COND(h_FmPcdKg);
-+    XX_UnlockIntrSpinlock(((t_FmPcdKg *)h_FmPcdKg)->h_HwSpinlock, intFlags);
-+}
-+
-+static uint32_t KgSchemeLock(t_Handle h_Scheme)
-+{
-+    ASSERT_COND(h_Scheme);
-+    return FmPcdLockSpinlock(((t_FmPcdKgScheme *)h_Scheme)->p_Lock);
-+}
-+
-+static void KgSchemeUnlock(t_Handle h_Scheme, uint32_t intFlags)
-+{
-+    ASSERT_COND(h_Scheme);
-+    FmPcdUnlockSpinlock(((t_FmPcdKgScheme *)h_Scheme)->p_Lock, intFlags);
-+}
-+
-+static bool KgSchemeFlagTryLock(t_Handle h_Scheme)
-+{
-+    ASSERT_COND(h_Scheme);
-+    return FmPcdLockTryLock(((t_FmPcdKgScheme *)h_Scheme)->p_Lock);
-+}
-+
-+static void KgSchemeFlagUnlock(t_Handle h_Scheme)
-+{
-+    ASSERT_COND(h_Scheme);
-+    FmPcdLockUnlock(((t_FmPcdKgScheme *)h_Scheme)->p_Lock);
-+}
-+
-+static t_Error WriteKgarWait(t_FmPcd *p_FmPcd, uint32_t fmkg_ar)
-+{
-+
-+    struct fman_kg_regs *regs = p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs;
-+
-+    if (fman_kg_write_ar_wait(regs, fmkg_ar))
-+        RETURN_ERROR(MINOR, E_INVALID_STATE, ("Keygen scheme access violation"));
-+
-+    return E_OK;
-+}
-+
-+static e_FmPcdKgExtractDfltSelect GetGenericSwDefault(t_FmPcdKgExtractDflt swDefaults[], uint8_t numOfSwDefaults, uint8_t code)
-+{
-+    int i;
-+
-+    switch (code)
-+    {
-+        case (KG_SCH_GEN_PARSE_RESULT_N_FQID):
-+        case (KG_SCH_GEN_DEFAULT):
-+        case (KG_SCH_GEN_NEXTHDR):
-+            for (i=0 ; i<numOfSwDefaults ; i++)
-+                if (swDefaults[i].type == e_FM_PCD_KG_GENERIC_NOT_FROM_DATA)
-+                    return swDefaults[i].dfltSelect;
-+            break;
-+        case (KG_SCH_GEN_SHIM1):
-+        case (KG_SCH_GEN_SHIM2):
-+        case (KG_SCH_GEN_IP_PID_NO_V):
-+        case (KG_SCH_GEN_ETH_NO_V):
-+        case (KG_SCH_GEN_SNAP_NO_V):
-+        case (KG_SCH_GEN_VLAN1_NO_V):
-+        case (KG_SCH_GEN_VLAN2_NO_V):
-+        case (KG_SCH_GEN_ETH_TYPE_NO_V):
-+        case (KG_SCH_GEN_PPP_NO_V):
-+        case (KG_SCH_GEN_MPLS1_NO_V):
-+        case (KG_SCH_GEN_MPLS_LAST_NO_V):
-+        case (KG_SCH_GEN_L3_NO_V):
-+        case (KG_SCH_GEN_IP2_NO_V):
-+        case (KG_SCH_GEN_GRE_NO_V):
-+        case (KG_SCH_GEN_L4_NO_V):
-+            for (i=0 ; i<numOfSwDefaults ; i++)
-+                if (swDefaults[i].type == e_FM_PCD_KG_GENERIC_FROM_DATA_NO_V)
-+                    return swDefaults[i].dfltSelect;
-+            break;
-+        case (KG_SCH_GEN_START_OF_FRM):
-+        case (KG_SCH_GEN_ETH):
-+        case (KG_SCH_GEN_SNAP):
-+        case (KG_SCH_GEN_VLAN1):
-+        case (KG_SCH_GEN_VLAN2):
-+        case (KG_SCH_GEN_ETH_TYPE):
-+        case (KG_SCH_GEN_PPP):
-+        case (KG_SCH_GEN_MPLS1):
-+        case (KG_SCH_GEN_MPLS2):
-+        case (KG_SCH_GEN_MPLS3):
-+        case (KG_SCH_GEN_MPLS_LAST):
-+        case (KG_SCH_GEN_IPV4):
-+        case (KG_SCH_GEN_IPV6):
-+        case (KG_SCH_GEN_IPV4_TUNNELED):
-+        case (KG_SCH_GEN_IPV6_TUNNELED):
-+        case (KG_SCH_GEN_MIN_ENCAP):
-+        case (KG_SCH_GEN_GRE):
-+        case (KG_SCH_GEN_TCP):
-+        case (KG_SCH_GEN_UDP):
-+        case (KG_SCH_GEN_IPSEC_AH):
-+        case (KG_SCH_GEN_SCTP):
-+        case (KG_SCH_GEN_DCCP):
-+        case (KG_SCH_GEN_IPSEC_ESP):
-+            for (i=0 ; i<numOfSwDefaults ; i++)
-+                if (swDefaults[i].type == e_FM_PCD_KG_GENERIC_FROM_DATA)
-+                    return swDefaults[i].dfltSelect;
-+            break;
-+        default:
-+            break;
-+    }
-+
-+    return e_FM_PCD_KG_DFLT_ILLEGAL;
-+}
-+
-+static uint8_t GetGenCode(e_FmPcdExtractFrom src, uint8_t *p_Offset)
-+{
-+    *p_Offset = 0;
-+
-+    switch (src)
-+    {
-+        case (e_FM_PCD_EXTRACT_FROM_FRAME_START):
-+            return KG_SCH_GEN_START_OF_FRM;
-+        case (e_FM_PCD_EXTRACT_FROM_DFLT_VALUE):
-+            return KG_SCH_GEN_DEFAULT;
-+        case (e_FM_PCD_EXTRACT_FROM_PARSE_RESULT):
-+            return KG_SCH_GEN_PARSE_RESULT_N_FQID;
-+        case (e_FM_PCD_EXTRACT_FROM_ENQ_FQID):
-+            *p_Offset = 32;
-+            return KG_SCH_GEN_PARSE_RESULT_N_FQID;
-+        case (e_FM_PCD_EXTRACT_FROM_CURR_END_OF_PARSE):
-+            return KG_SCH_GEN_NEXTHDR;
-+        default:
-+            REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal 'extract from' src"));
-+            return 0;
-+    }
-+}
-+
-+static uint8_t GetGenHdrCode(e_NetHeaderType hdr, e_FmPcdHdrIndex hdrIndex, bool ignoreProtocolValidation)
-+{
-+    if (!ignoreProtocolValidation)
-+        switch (hdr)
-+        {
-+            case (HEADER_TYPE_NONE):
-+                ASSERT_COND(FALSE);
-+            case (HEADER_TYPE_ETH):
-+                return KG_SCH_GEN_ETH;
-+            case (HEADER_TYPE_LLC_SNAP):
-+                return KG_SCH_GEN_SNAP;
-+            case (HEADER_TYPE_PPPoE):
-+                return KG_SCH_GEN_PPP;
-+            case (HEADER_TYPE_MPLS):
-+                if ((hdrIndex == e_FM_PCD_HDR_INDEX_NONE) || (hdrIndex == e_FM_PCD_HDR_INDEX_1))
-+                    return KG_SCH_GEN_MPLS1;
-+                if (hdrIndex == e_FM_PCD_HDR_INDEX_2)
-+                    return KG_SCH_GEN_MPLS2;
-+                if (hdrIndex == e_FM_PCD_HDR_INDEX_3)
-+                    return KG_SCH_GEN_MPLS3;
-+                if (hdrIndex == e_FM_PCD_HDR_INDEX_LAST)
-+                    return KG_SCH_GEN_MPLS_LAST;
-+                REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal MPLS header index"));
-+                return 0;
-+            case (HEADER_TYPE_IPv4):
-+                if ((hdrIndex == e_FM_PCD_HDR_INDEX_NONE) || (hdrIndex == e_FM_PCD_HDR_INDEX_1))
-+                    return KG_SCH_GEN_IPV4;
-+                if ((hdrIndex == e_FM_PCD_HDR_INDEX_2) || (hdrIndex == e_FM_PCD_HDR_INDEX_LAST))
-+                    return KG_SCH_GEN_IPV4_TUNNELED;
-+                REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv4 header index"));
-+                return 0;
-+            case (HEADER_TYPE_IPv6):
-+                if ((hdrIndex == e_FM_PCD_HDR_INDEX_NONE) || (hdrIndex == e_FM_PCD_HDR_INDEX_1))
-+                    return KG_SCH_GEN_IPV6;
-+                if ((hdrIndex == e_FM_PCD_HDR_INDEX_2) || (hdrIndex == e_FM_PCD_HDR_INDEX_LAST))
-+                    return KG_SCH_GEN_IPV6_TUNNELED;
-+                REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv6 header index"));
-+                return 0;
-+            case (HEADER_TYPE_GRE):
-+                return KG_SCH_GEN_GRE;
-+            case (HEADER_TYPE_TCP):
-+                return KG_SCH_GEN_TCP;
-+            case (HEADER_TYPE_UDP):
-+                return KG_SCH_GEN_UDP;
-+            case (HEADER_TYPE_IPSEC_AH):
-+                return KG_SCH_GEN_IPSEC_AH;
-+            case (HEADER_TYPE_IPSEC_ESP):
-+                return KG_SCH_GEN_IPSEC_ESP;
-+            case (HEADER_TYPE_SCTP):
-+                return KG_SCH_GEN_SCTP;
-+            case (HEADER_TYPE_DCCP):
-+                return KG_SCH_GEN_DCCP;
-+            default:
-+                REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                return 0;
-+        }
-+    else
-+        switch (hdr)
-+        {
-+            case (HEADER_TYPE_NONE):
-+                ASSERT_COND(FALSE);
-+            case (HEADER_TYPE_ETH):
-+                return KG_SCH_GEN_ETH_NO_V;
-+            case (HEADER_TYPE_LLC_SNAP):
-+                return KG_SCH_GEN_SNAP_NO_V;
-+            case (HEADER_TYPE_PPPoE):
-+                return KG_SCH_GEN_PPP_NO_V;
-+            case (HEADER_TYPE_MPLS):
-+                 if ((hdrIndex == e_FM_PCD_HDR_INDEX_NONE) || (hdrIndex == e_FM_PCD_HDR_INDEX_1))
-+                    return KG_SCH_GEN_MPLS1_NO_V;
-+                if (hdrIndex == e_FM_PCD_HDR_INDEX_LAST)
-+                    return KG_SCH_GEN_MPLS_LAST_NO_V;
-+                if ((hdrIndex == e_FM_PCD_HDR_INDEX_2) || (hdrIndex == e_FM_PCD_HDR_INDEX_3) )
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Indexed MPLS Extraction not supported"));
-+                else
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal MPLS header index"));
-+                return 0;
-+            case (HEADER_TYPE_IPv4):
-+            case (HEADER_TYPE_IPv6):
-+                if ((hdrIndex == e_FM_PCD_HDR_INDEX_NONE) || (hdrIndex == e_FM_PCD_HDR_INDEX_1))
-+                    return KG_SCH_GEN_L3_NO_V;
-+                if ((hdrIndex == e_FM_PCD_HDR_INDEX_2) || (hdrIndex == e_FM_PCD_HDR_INDEX_LAST))
-+                    return KG_SCH_GEN_IP2_NO_V;
-+                REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IP header index"));
-+            case (HEADER_TYPE_MINENCAP):
-+                return KG_SCH_GEN_IP2_NO_V;
-+            case (HEADER_TYPE_USER_DEFINED_L3):
-+                return KG_SCH_GEN_L3_NO_V;
-+            case (HEADER_TYPE_GRE):
-+                return KG_SCH_GEN_GRE_NO_V;
-+            case (HEADER_TYPE_TCP):
-+            case (HEADER_TYPE_UDP):
-+            case (HEADER_TYPE_IPSEC_AH):
-+            case (HEADER_TYPE_IPSEC_ESP):
-+            case (HEADER_TYPE_SCTP):
-+            case (HEADER_TYPE_DCCP):
-+                return KG_SCH_GEN_L4_NO_V;
-+            case (HEADER_TYPE_USER_DEFINED_SHIM1):
-+                return KG_SCH_GEN_SHIM1;
-+            case (HEADER_TYPE_USER_DEFINED_SHIM2):
-+                return KG_SCH_GEN_SHIM2;
-+            default:
-+                REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                return 0;
-+        }
-+}
-+static t_GenericCodes GetGenFieldCode(e_NetHeaderType hdr, t_FmPcdFields field, bool ignoreProtocolValidation, e_FmPcdHdrIndex hdrIndex)
-+{
-+    if (!ignoreProtocolValidation)
-+        switch (hdr)
-+        {
-+            case (HEADER_TYPE_NONE):
-+                ASSERT_COND(FALSE);
-+                break;
-+            case (HEADER_TYPE_ETH):
-+                switch (field.eth)
-+                {
-+                    case (NET_HEADER_FIELD_ETH_TYPE):
-+                        return KG_SCH_GEN_ETH_TYPE;
-+                    default:
-+                        REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                        return 0;
-+                }
-+                break;
-+            case (HEADER_TYPE_VLAN):
-+                switch (field.vlan)
-+                {
-+                    case (NET_HEADER_FIELD_VLAN_TCI):
-+                        if ((hdrIndex == e_FM_PCD_HDR_INDEX_NONE) || (hdrIndex == e_FM_PCD_HDR_INDEX_1))
-+                            return KG_SCH_GEN_VLAN1;
-+                        if (hdrIndex == e_FM_PCD_HDR_INDEX_LAST)
-+                            return KG_SCH_GEN_VLAN2;
-+                        REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal VLAN header index"));
-+                        return 0;
-+                }
-+                break;
-+            case (HEADER_TYPE_MPLS):
-+            case (HEADER_TYPE_IPSEC_AH):
-+            case (HEADER_TYPE_IPSEC_ESP):
-+            case (HEADER_TYPE_LLC_SNAP):
-+            case (HEADER_TYPE_PPPoE):
-+            case (HEADER_TYPE_IPv4):
-+            case (HEADER_TYPE_IPv6):
-+            case (HEADER_TYPE_GRE):
-+            case (HEADER_TYPE_MINENCAP):
-+            case (HEADER_TYPE_USER_DEFINED_L3):
-+            case (HEADER_TYPE_TCP):
-+            case (HEADER_TYPE_UDP):
-+            case (HEADER_TYPE_SCTP):
-+            case (HEADER_TYPE_DCCP):
-+            case (HEADER_TYPE_USER_DEFINED_L4):
-+                REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                return 0;
-+            default:
-+                break;
-+
-+        }
-+        else
-+            switch (hdr)
-+            {
-+                case (HEADER_TYPE_NONE):
-+                    ASSERT_COND(FALSE);
-+                    break;
-+                case (HEADER_TYPE_ETH):
-+                    switch (field.eth)
-+                    {
-+                        case (NET_HEADER_FIELD_ETH_TYPE):
-+                            return KG_SCH_GEN_ETH_TYPE_NO_V;
-+                        default:
-+                            REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                            return 0;
-+                    }
-+                    break;
-+                case (HEADER_TYPE_VLAN):
-+                    switch (field.vlan)
-+                    {
-+                        case (NET_HEADER_FIELD_VLAN_TCI) :
-+                            if ((hdrIndex == e_FM_PCD_HDR_INDEX_NONE) || (hdrIndex == e_FM_PCD_HDR_INDEX_1))
-+                                return KG_SCH_GEN_VLAN1_NO_V;
-+                            if (hdrIndex == e_FM_PCD_HDR_INDEX_LAST)
-+                                return KG_SCH_GEN_VLAN2_NO_V;
-+                            REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal VLAN header index"));
-+                            return 0;
-+                    }
-+                    break;
-+                case (HEADER_TYPE_IPv4):
-+                    switch (field.ipv4)
-+                    {
-+                        case (NET_HEADER_FIELD_IPv4_PROTO):
-+                            return KG_SCH_GEN_IP_PID_NO_V;
-+                        default:
-+                            REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                            return 0;
-+                    }
-+                    break;
-+                case (HEADER_TYPE_IPv6):
-+                   switch (field.ipv6)
-+                    {
-+                        case (NET_HEADER_FIELD_IPv6_NEXT_HDR):
-+                            return KG_SCH_GEN_IP_PID_NO_V;
-+                        default:
-+                            REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                            return 0;
-+                    }
-+                    break;
-+                case (HEADER_TYPE_MPLS):
-+                case (HEADER_TYPE_LLC_SNAP):
-+                case (HEADER_TYPE_PPPoE):
-+                case (HEADER_TYPE_GRE):
-+                case (HEADER_TYPE_MINENCAP):
-+                case (HEADER_TYPE_USER_DEFINED_L3):
-+                case (HEADER_TYPE_TCP):
-+                case (HEADER_TYPE_UDP):
-+                case (HEADER_TYPE_IPSEC_AH):
-+                case (HEADER_TYPE_IPSEC_ESP):
-+                case (HEADER_TYPE_SCTP):
-+                case (HEADER_TYPE_DCCP):
-+                case (HEADER_TYPE_USER_DEFINED_L4):
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+                default:
-+                    break;
-+            }
-+    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Header not supported"));
-+    return 0;
-+}
-+
-+static t_KnownFieldsMasks GetKnownProtMask(t_FmPcd *p_FmPcd, e_NetHeaderType hdr, e_FmPcdHdrIndex index, t_FmPcdFields field)
-+{
-+    UNUSED(p_FmPcd);
-+
-+    switch (hdr)
-+    {
-+        case (HEADER_TYPE_NONE):
-+            ASSERT_COND(FALSE);
-+            break;
-+        case (HEADER_TYPE_ETH):
-+            switch (field.eth)
-+            {
-+                case (NET_HEADER_FIELD_ETH_DA):
-+                    return KG_SCH_KN_MACDST;
-+                case (NET_HEADER_FIELD_ETH_SA):
-+                    return KG_SCH_KN_MACSRC;
-+                case (NET_HEADER_FIELD_ETH_TYPE):
-+                    return KG_SCH_KN_ETYPE;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+            }
-+        case (HEADER_TYPE_LLC_SNAP):
-+            switch (field.llcSnap)
-+            {
-+                case (NET_HEADER_FIELD_LLC_SNAP_TYPE):
-+                    return KG_SCH_KN_ETYPE;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+            }
-+        case (HEADER_TYPE_VLAN):
-+            switch (field.vlan)
-+            {
-+                case (NET_HEADER_FIELD_VLAN_TCI):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE) || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return KG_SCH_KN_TCI1;
-+                    if (index == e_FM_PCD_HDR_INDEX_LAST)
-+                        return KG_SCH_KN_TCI2;
-+                    else
-+                    {
-+                        REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                        return 0;
-+                    }
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+            }
-+        case (HEADER_TYPE_MPLS):
-+            switch (field.mpls)
-+            {
-+                case (NET_HEADER_FIELD_MPLS_LABEL_STACK):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE) || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return KG_SCH_KN_MPLS1;
-+                    if (index == e_FM_PCD_HDR_INDEX_2)
-+                        return KG_SCH_KN_MPLS2;
-+                    if (index == e_FM_PCD_HDR_INDEX_LAST)
-+                        return KG_SCH_KN_MPLS_LAST;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal MPLS index"));
-+                    return 0;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+            }
-+        case (HEADER_TYPE_IPv4):
-+            switch (field.ipv4)
-+            {
-+                case (NET_HEADER_FIELD_IPv4_SRC_IP):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE) || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return KG_SCH_KN_IPSRC1;
-+                    if ((index == e_FM_PCD_HDR_INDEX_2) || (index == e_FM_PCD_HDR_INDEX_LAST))
-+                        return KG_SCH_KN_IPSRC2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv4 index"));
-+                    return 0;
-+                case (NET_HEADER_FIELD_IPv4_DST_IP):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE) || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return KG_SCH_KN_IPDST1;
-+                    if ((index == e_FM_PCD_HDR_INDEX_2) || (index == e_FM_PCD_HDR_INDEX_LAST))
-+                        return KG_SCH_KN_IPDST2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv4 index"));
-+                    return 0;
-+                case (NET_HEADER_FIELD_IPv4_PROTO):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE) || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return KG_SCH_KN_PTYPE1;
-+                    if ((index == e_FM_PCD_HDR_INDEX_2) || (index == e_FM_PCD_HDR_INDEX_LAST))
-+                        return KG_SCH_KN_PTYPE2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv4 index"));
-+                    return 0;
-+                case (NET_HEADER_FIELD_IPv4_TOS):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE) || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return KG_SCH_KN_IPTOS_TC1;
-+                    if ((index == e_FM_PCD_HDR_INDEX_2) || (index == e_FM_PCD_HDR_INDEX_LAST))
-+                        return KG_SCH_KN_IPTOS_TC2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv4 index"));
-+                    return 0;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+            }
-+        case (HEADER_TYPE_IPv6):
-+             switch (field.ipv6)
-+            {
-+                case (NET_HEADER_FIELD_IPv6_SRC_IP):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE) || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return KG_SCH_KN_IPSRC1;
-+                    if ((index == e_FM_PCD_HDR_INDEX_2) || (index == e_FM_PCD_HDR_INDEX_LAST))
-+                        return KG_SCH_KN_IPSRC2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv6 index"));
-+                    return 0;
-+                case (NET_HEADER_FIELD_IPv6_DST_IP):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE) || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return KG_SCH_KN_IPDST1;
-+                    if ((index == e_FM_PCD_HDR_INDEX_2) || (index == e_FM_PCD_HDR_INDEX_LAST))
-+                        return KG_SCH_KN_IPDST2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv6 index"));
-+                    return 0;
-+                case (NET_HEADER_FIELD_IPv6_NEXT_HDR):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE) || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return KG_SCH_KN_PTYPE1;
-+                    if (index == e_FM_PCD_HDR_INDEX_2)
-+                        return KG_SCH_KN_PTYPE2;
-+                    if (index == e_FM_PCD_HDR_INDEX_LAST)
-+#ifdef FM_KG_NO_IPPID_SUPPORT
-+                    if (p_FmPcd->fmRevInfo.majorRev < 6)
-+                        return KG_SCH_KN_PTYPE2;
-+#endif /* FM_KG_NO_IPPID_SUPPORT */
-+                        return KG_SCH_KN_IPPID;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv6 index"));
-+                    return 0;
-+                case (NET_HEADER_FIELD_IPv6_VER | NET_HEADER_FIELD_IPv6_FL | NET_HEADER_FIELD_IPv6_TC):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE) || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return (KG_SCH_KN_IPV6FL1 | KG_SCH_KN_IPTOS_TC1);
-+                    if ((index == e_FM_PCD_HDR_INDEX_2) || (index == e_FM_PCD_HDR_INDEX_LAST))
-+                        return (KG_SCH_KN_IPV6FL2 | KG_SCH_KN_IPTOS_TC2);
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv6 index"));
-+                    return 0;
-+                case (NET_HEADER_FIELD_IPv6_VER | NET_HEADER_FIELD_IPv6_TC):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE) || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return KG_SCH_KN_IPTOS_TC1;
-+                    if ((index == e_FM_PCD_HDR_INDEX_2) || (index == e_FM_PCD_HDR_INDEX_LAST))
-+                        return KG_SCH_KN_IPTOS_TC2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv6 index"));
-+                    return 0;
-+                case (NET_HEADER_FIELD_IPv6_FL):
-+                    if ((index == e_FM_PCD_HDR_INDEX_NONE) || (index == e_FM_PCD_HDR_INDEX_1))
-+                        return KG_SCH_KN_IPV6FL1;
-+                    if ((index == e_FM_PCD_HDR_INDEX_2) || (index == e_FM_PCD_HDR_INDEX_LAST))
-+                        return KG_SCH_KN_IPV6FL2;
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IPv6 index"));
-+                    return 0;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+            }
-+        case (HEADER_TYPE_GRE):
-+            switch (field.gre)
-+            {
-+                case (NET_HEADER_FIELD_GRE_TYPE):
-+                    return KG_SCH_KN_GREPTYPE;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+            }
-+        case (HEADER_TYPE_MINENCAP):
-+            switch (field.minencap)
-+            {
-+                case (NET_HEADER_FIELD_MINENCAP_SRC_IP):
-+                    return KG_SCH_KN_IPSRC2;
-+                case (NET_HEADER_FIELD_MINENCAP_DST_IP):
-+                    return KG_SCH_KN_IPDST2;
-+                case (NET_HEADER_FIELD_MINENCAP_TYPE):
-+                    return KG_SCH_KN_PTYPE2;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+            }
-+        case (HEADER_TYPE_TCP):
-+            switch (field.tcp)
-+            {
-+                case (NET_HEADER_FIELD_TCP_PORT_SRC):
-+                    return KG_SCH_KN_L4PSRC;
-+                case (NET_HEADER_FIELD_TCP_PORT_DST):
-+                    return KG_SCH_KN_L4PDST;
-+                case (NET_HEADER_FIELD_TCP_FLAGS):
-+                    return KG_SCH_KN_TFLG;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+            }
-+        case (HEADER_TYPE_UDP):
-+            switch (field.udp)
-+            {
-+                case (NET_HEADER_FIELD_UDP_PORT_SRC):
-+                    return KG_SCH_KN_L4PSRC;
-+                case (NET_HEADER_FIELD_UDP_PORT_DST):
-+                    return KG_SCH_KN_L4PDST;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+            }
-+        case (HEADER_TYPE_IPSEC_AH):
-+            switch (field.ipsecAh)
-+            {
-+                case (NET_HEADER_FIELD_IPSEC_AH_SPI):
-+                    return KG_SCH_KN_IPSEC_SPI;
-+                case (NET_HEADER_FIELD_IPSEC_AH_NH):
-+                    return KG_SCH_KN_IPSEC_NH;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+            }
-+        case (HEADER_TYPE_IPSEC_ESP):
-+            switch (field.ipsecEsp)
-+            {
-+                case (NET_HEADER_FIELD_IPSEC_ESP_SPI):
-+                    return KG_SCH_KN_IPSEC_SPI;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+            }
-+        case (HEADER_TYPE_SCTP):
-+            switch (field.sctp)
-+            {
-+                case (NET_HEADER_FIELD_SCTP_PORT_SRC):
-+                    return KG_SCH_KN_L4PSRC;
-+                case (NET_HEADER_FIELD_SCTP_PORT_DST):
-+                    return KG_SCH_KN_L4PDST;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+            }
-+        case (HEADER_TYPE_DCCP):
-+            switch (field.dccp)
-+            {
-+                case (NET_HEADER_FIELD_DCCP_PORT_SRC):
-+                    return KG_SCH_KN_L4PSRC;
-+                case (NET_HEADER_FIELD_DCCP_PORT_DST):
-+                    return KG_SCH_KN_L4PDST;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+            }
-+        case (HEADER_TYPE_PPPoE):
-+            switch (field.pppoe)
-+            {
-+                case (NET_HEADER_FIELD_PPPoE_PID):
-+                    return KG_SCH_KN_PPPID;
-+                case (NET_HEADER_FIELD_PPPoE_SID):
-+                    return KG_SCH_KN_PPPSID;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+                    return 0;
-+            }
-+        default:
-+            break;
-+
-+    }
-+
-+    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Extraction not supported"));
-+    return 0;
-+}
-+
-+
-+static uint8_t GetKnownFieldId(uint32_t bitMask)
-+{
-+    uint8_t cnt = 0;
-+
-+    while (bitMask)
-+        if (bitMask & 0x80000000)
-+            break;
-+        else
-+        {
-+            cnt++;
-+            bitMask <<= 1;
-+        }
-+    return cnt;
-+
-+}
-+
-+static uint8_t GetExtractedOrMask(uint8_t bitOffset, bool fqid)
-+{
-+    uint8_t i, mask, numOfOnesToClear, walking1Mask = 1;
-+
-+    /* bitOffset 1-7 --> mask 0x1-0x7F */
-+    if (bitOffset<8)
-+    {
-+        mask = 0;
-+        for (i = 0 ; i < bitOffset ; i++, walking1Mask <<= 1)
-+            mask |= walking1Mask;
-+    }
-+    else
-+    {
-+       mask = 0xFF;
-+       numOfOnesToClear = 0;
-+       if (fqid && bitOffset>24)
-+           /* bitOffset 25-31 --> mask 0xFE-0x80 */
-+           numOfOnesToClear = (uint8_t)(bitOffset-24);
-+       else
-+          /* bitOffset 9-15 --> mask 0xFE-0x80 */
-+          if (!fqid && bitOffset>8)
-+               numOfOnesToClear = (uint8_t)(bitOffset-8);
-+       for (i = 0 ; i < numOfOnesToClear ; i++, walking1Mask <<= 1)
-+           mask &= ~walking1Mask;
-+       /* bitOffset 8-24 for FQID, 8 for PP --> no mask (0xFF)*/
-+    }
-+    return mask;
-+}
-+
-+static void IncSchemeOwners(t_FmPcd *p_FmPcd, t_FmPcdKgInterModuleBindPortToSchemes *p_BindPort)
-+{
-+    t_FmPcdKg           *p_FmPcdKg;
-+    t_FmPcdKgScheme     *p_Scheme;
-+    uint32_t            intFlags;
-+    uint8_t             relativeSchemeId;
-+    int                 i;
-+
-+    p_FmPcdKg = p_FmPcd->p_FmPcdKg;
-+
-+    /* for each scheme - update owners counters */
-+    for (i = 0; i < p_BindPort->numOfSchemes; i++)
-+    {
-+        relativeSchemeId = FmPcdKgGetRelativeSchemeId(p_FmPcd, p_BindPort->schemesIds[i]);
-+        ASSERT_COND(relativeSchemeId < FM_PCD_KG_NUM_OF_SCHEMES);
-+
-+        p_Scheme = &p_FmPcdKg->schemes[relativeSchemeId];
-+
-+        /* increment owners number */
-+        intFlags = KgSchemeLock(p_Scheme);
-+        p_Scheme->owners++;
-+        KgSchemeUnlock(p_Scheme, intFlags);
-+    }
-+}
-+
-+static void DecSchemeOwners(t_FmPcd *p_FmPcd, t_FmPcdKgInterModuleBindPortToSchemes *p_BindPort)
-+{
-+    t_FmPcdKg           *p_FmPcdKg;
-+    t_FmPcdKgScheme     *p_Scheme;
-+    uint32_t            intFlags;
-+    uint8_t             relativeSchemeId;
-+    int                 i;
-+
-+    p_FmPcdKg = p_FmPcd->p_FmPcdKg;
-+
-+    /* for each scheme - update owners counters */
-+    for (i = 0; i < p_BindPort->numOfSchemes; i++)
-+    {
-+        relativeSchemeId = FmPcdKgGetRelativeSchemeId(p_FmPcd, p_BindPort->schemesIds[i]);
-+        ASSERT_COND(relativeSchemeId < FM_PCD_KG_NUM_OF_SCHEMES);
-+
-+        p_Scheme = &p_FmPcdKg->schemes[relativeSchemeId];
-+
-+        /* increment owners number */
-+        ASSERT_COND(p_Scheme->owners);
-+        intFlags = KgSchemeLock(p_Scheme);
-+        p_Scheme->owners--;
-+        KgSchemeUnlock(p_Scheme, intFlags);
-+    }
-+}
-+
-+static void UpdateRequiredActionFlag(t_FmPcdKgScheme *p_Scheme, bool set)
-+{
-+    /* this routine is locked by the calling routine */
-+    ASSERT_COND(p_Scheme);
-+    ASSERT_COND(p_Scheme->valid);
-+
-+    if (set)
-+        p_Scheme->requiredActionFlag = TRUE;
-+    else
-+    {
-+        p_Scheme->requiredAction = 0;
-+        p_Scheme->requiredActionFlag = FALSE;
-+    }
-+}
-+
-+static t_Error KgWriteSp(t_FmPcd *p_FmPcd, uint8_t hardwarePortId, uint32_t spReg, bool add)
-+{
-+    struct fman_kg_regs *p_KgRegs;
-+
-+    uint32_t                tmpKgarReg = 0, intFlags;
-+    t_Error                 err = E_OK;
-+
-+    /* The calling routine had locked the port, so for each port only one core can access
-+     * (so we don't need a lock here) */
-+
-+    if (p_FmPcd->h_Hc)
-+        return FmHcKgWriteSp(p_FmPcd->h_Hc, hardwarePortId, spReg, add);
-+
-+    p_KgRegs = p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs;
-+
-+    tmpKgarReg = FmPcdKgBuildReadPortSchemeBindActionReg(hardwarePortId);
-+    /* lock a common KG reg */
-+    intFlags = KgHwLock(p_FmPcd->p_FmPcdKg);
-+    err = WriteKgarWait(p_FmPcd, tmpKgarReg);
-+    if (err)
-+    {
-+        KgHwUnlock(p_FmPcd->p_FmPcdKg, intFlags);
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+
-+    fman_kg_write_sp(p_KgRegs, spReg, add);
-+
-+    tmpKgarReg = FmPcdKgBuildWritePortSchemeBindActionReg(hardwarePortId);
-+
-+    err = WriteKgarWait(p_FmPcd, tmpKgarReg);
-+    KgHwUnlock(p_FmPcd->p_FmPcdKg, intFlags);
-+    return err;
-+}
-+
-+static t_Error KgWriteCpp(t_FmPcd *p_FmPcd, uint8_t hardwarePortId, uint32_t cppReg)
-+{
-+    struct fman_kg_regs    *p_KgRegs;
-+    uint32_t                tmpKgarReg, intFlags;
-+    t_Error                 err;
-+
-+    p_KgRegs = p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs;
-+
-+    if (p_FmPcd->h_Hc)
-+    {
-+        err = FmHcKgWriteCpp(p_FmPcd->h_Hc, hardwarePortId, cppReg);
-+        return err;
-+    }
-+
-+    intFlags = KgHwLock(p_FmPcd->p_FmPcdKg);
-+    fman_kg_write_cpp(p_KgRegs, cppReg);
-+    tmpKgarReg = FmPcdKgBuildWritePortClsPlanBindActionReg(hardwarePortId);
-+    err = WriteKgarWait(p_FmPcd, tmpKgarReg);
-+    KgHwUnlock(p_FmPcd->p_FmPcdKg, intFlags);
-+
-+    return err;
-+}
-+
-+static uint32_t BuildCppReg(t_FmPcd *p_FmPcd, uint8_t clsPlanGrpId)
-+{
-+    uint32_t    tmpKgpeCpp;
-+
-+    tmpKgpeCpp = (uint32_t)(p_FmPcd->p_FmPcdKg->clsPlanGrps[clsPlanGrpId].baseEntry / 8);
-+    tmpKgpeCpp |= (uint32_t)(((p_FmPcd->p_FmPcdKg->clsPlanGrps[clsPlanGrpId].sizeOfGrp / 8) - 1) << FM_KG_PE_CPP_MASK_SHIFT);
-+
-+    return tmpKgpeCpp;
-+}
-+
-+static t_Error BindPortToClsPlanGrp(t_FmPcd *p_FmPcd, uint8_t hardwarePortId, uint8_t clsPlanGrpId)
-+{
-+    uint32_t                tmpKgpeCpp = 0;
-+
-+    tmpKgpeCpp = BuildCppReg(p_FmPcd, clsPlanGrpId);
-+    return KgWriteCpp(p_FmPcd, hardwarePortId, tmpKgpeCpp);
-+}
-+
-+static void UnbindPortToClsPlanGrp(t_FmPcd *p_FmPcd, uint8_t hardwarePortId)
-+{
-+    KgWriteCpp(p_FmPcd, hardwarePortId, 0);
-+}
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+static uint32_t __attribute__((unused)) ReadClsPlanBlockActionReg(uint8_t grpId)
-+{
-+    return (uint32_t)(FM_KG_KGAR_GO |
-+                      FM_KG_KGAR_READ |
-+                      FM_PCD_KG_KGAR_SEL_CLS_PLAN_ENTRY |
-+                      DUMMY_PORT_ID |
-+                      ((uint32_t)grpId << FM_PCD_KG_KGAR_NUM_SHIFT) |
-+                      FM_PCD_KG_KGAR_WSEL_MASK);
-+
-+    /* if we ever want to write 1 by 1, use:
-+       sel = (uint8_t)(0x01 << (7- (entryId % CLS_PLAN_NUM_PER_GRP)));
-+     */
-+}
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+static void PcdKgErrorException(t_Handle h_FmPcd)
-+{
-+    t_FmPcd                 *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    uint32_t                event,schemeIndexes = 0, index = 0;
-+    struct fman_kg_regs    *p_KgRegs;
-+
-+    ASSERT_COND(FmIsMaster(p_FmPcd->h_Fm));
-+    p_KgRegs = p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs;
-+    fman_kg_get_event(p_KgRegs, &event, &schemeIndexes);
-+
-+    if (event & FM_EX_KG_DOUBLE_ECC)
-+        p_FmPcd->f_Exception(p_FmPcd->h_App,e_FM_PCD_KG_EXCEPTION_DOUBLE_ECC);
-+    if (event & FM_EX_KG_KEYSIZE_OVERFLOW)
-+    {
-+        if (schemeIndexes)
-+        {
-+            while (schemeIndexes)
-+            {
-+                if (schemeIndexes & 0x1)
-+                    p_FmPcd->f_FmPcdIndexedException(p_FmPcd->h_App,e_FM_PCD_KG_EXCEPTION_KEYSIZE_OVERFLOW, (uint16_t)(31 - index));
-+                schemeIndexes >>= 1;
-+                index+=1;
-+            }
-+        }
-+        else /* this should happen only when interrupt is forced. */
-+            p_FmPcd->f_Exception(p_FmPcd->h_App,e_FM_PCD_KG_EXCEPTION_KEYSIZE_OVERFLOW);
-+    }
-+}
-+
-+static t_Error KgInitGuest(t_FmPcd *p_FmPcd)
-+{
-+    t_Error                     err = E_OK;
-+    t_FmPcdIpcKgSchemesParams   kgAlloc;
-+    uint32_t                    replyLength;
-+    t_FmPcdIpcReply             reply;
-+    t_FmPcdIpcMsg               msg;
-+
-+    ASSERT_COND(p_FmPcd->guestId != NCSW_MASTER_ID);
-+
-+    /* in GUEST_PARTITION, we use the IPC  */
-+    memset(&reply, 0, sizeof(reply));
-+    memset(&msg, 0, sizeof(msg));
-+    memset(&kgAlloc, 0, sizeof(t_FmPcdIpcKgSchemesParams));
-+    kgAlloc.numOfSchemes = p_FmPcd->p_FmPcdKg->numOfSchemes;
-+    kgAlloc.guestId = p_FmPcd->guestId;
-+    msg.msgId = FM_PCD_ALLOC_KG_SCHEMES;
-+    memcpy(msg.msgBody, &kgAlloc, sizeof(kgAlloc));
-+    replyLength = sizeof(uint32_t) + p_FmPcd->p_FmPcdKg->numOfSchemes*sizeof(uint8_t);
-+    if ((err = XX_IpcSendMessage(p_FmPcd->h_IpcSession,
-+                                 (uint8_t*)&msg,
-+                                 sizeof(msg.msgId) + sizeof(kgAlloc),
-+                                 (uint8_t*)&reply,
-+                                 &replyLength,
-+                                 NULL,
-+                                 NULL)) != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    if (replyLength != (sizeof(uint32_t) + p_FmPcd->p_FmPcdKg->numOfSchemes*sizeof(uint8_t)))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+    memcpy(p_FmPcd->p_FmPcdKg->schemesIds, (uint8_t*)(reply.replyBody),p_FmPcd->p_FmPcdKg->numOfSchemes*sizeof(uint8_t));
-+
-+    return (t_Error)reply.error;
-+}
-+
-+static t_Error KgInitMaster(t_FmPcd *p_FmPcd)
-+{
-+    t_Error                     err = E_OK;
-+    struct fman_kg_regs         *p_Regs = p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs;
-+
-+    ASSERT_COND(p_FmPcd->guestId == NCSW_MASTER_ID);
-+
-+    if (p_FmPcd->exceptions & FM_EX_KG_DOUBLE_ECC)
-+        FmEnableRamsEcc(p_FmPcd->h_Fm);
-+
-+    fman_kg_init(p_Regs, p_FmPcd->exceptions, GET_NIA_BMI_AC_ENQ_FRAME(p_FmPcd));
-+
-+    /* register even if no interrupts enabled, to allow future enablement */
-+    FmRegisterIntr(p_FmPcd->h_Fm,
-+                   e_FM_MOD_KG,
-+                   0,
-+                   e_FM_INTR_TYPE_ERR,
-+                   PcdKgErrorException,
-+                   p_FmPcd);
-+
-+    fman_kg_enable_scheme_interrupts(p_Regs);
-+
-+    if (p_FmPcd->p_FmPcdKg->numOfSchemes)
-+    {
-+        err = FmPcdKgAllocSchemes(p_FmPcd,
-+                                  p_FmPcd->p_FmPcdKg->numOfSchemes,
-+                                  p_FmPcd->guestId,
-+                                  p_FmPcd->p_FmPcdKg->schemesIds);
-+        if (err)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+
-+    return E_OK;
-+}
-+
-+static void  ValidateSchemeSw(t_FmPcdKgScheme *p_Scheme)
-+{
-+    ASSERT_COND(!p_Scheme->valid);
-+    if (p_Scheme->netEnvId != ILLEGAL_NETENV)
-+        FmPcdIncNetEnvOwners(p_Scheme->h_FmPcd, p_Scheme->netEnvId);
-+    p_Scheme->valid = TRUE;
-+}
-+
-+static t_Error InvalidateSchemeSw(t_FmPcdKgScheme *p_Scheme)
-+{
-+    if (p_Scheme->owners)
-+       RETURN_ERROR(MINOR, E_INVALID_STATE, ("Trying to delete a scheme that has ports bound to"));
-+
-+    if (p_Scheme->netEnvId != ILLEGAL_NETENV)
-+        FmPcdDecNetEnvOwners(p_Scheme->h_FmPcd, p_Scheme->netEnvId);
-+    p_Scheme->valid = FALSE;
-+
-+    return E_OK;
-+}
-+
-+static t_Error BuildSchemeRegs(t_FmPcdKgScheme            *p_Scheme,
-+                               t_FmPcdKgSchemeParams      *p_SchemeParams,
-+                               struct fman_kg_scheme_regs *p_SchemeRegs)
-+{
-+    t_FmPcd                             *p_FmPcd = (t_FmPcd *)(p_Scheme->h_FmPcd);
-+    uint32_t                            grpBits = 0;
-+    uint8_t                             grpBase;
-+    bool                                direct=TRUE, absolute=FALSE;
-+    uint16_t                            profileId=0, numOfProfiles=0, relativeProfileId;
-+    t_Error                             err = E_OK;
-+    int                                 i = 0;
-+    t_NetEnvParams                      netEnvParams;
-+    uint32_t                            tmpReg, fqbTmp = 0, ppcTmp = 0, selectTmp, maskTmp, knownTmp, genTmp;
-+    t_FmPcdKgKeyExtractAndHashParams    *p_KeyAndHash = NULL;
-+    uint8_t                             j, curr, idx;
-+    uint8_t                             id, shift=0, code=0, offset=0, size=0;
-+    t_FmPcdExtractEntry                 *p_Extract = NULL;
-+    t_FmPcdKgExtractedOrParams          *p_ExtractOr;
-+    bool                                generic = FALSE;
-+    t_KnownFieldsMasks                  bitMask;
-+    e_FmPcdKgExtractDfltSelect          swDefault = (e_FmPcdKgExtractDfltSelect)0;
-+    t_FmPcdKgSchemesExtracts            *p_LocalExtractsArray;
-+    uint8_t                             numOfSwDefaults = 0;
-+    t_FmPcdKgExtractDflt                swDefaults[NUM_OF_SW_DEFAULTS];
-+    uint8_t                             currGenId = 0;
-+
-+    memset(swDefaults, 0, NUM_OF_SW_DEFAULTS*sizeof(t_FmPcdKgExtractDflt));
-+    memset(p_SchemeRegs, 0, sizeof(struct fman_kg_scheme_regs));
-+
-+    if (p_SchemeParams->netEnvParams.numOfDistinctionUnits > FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("numOfDistinctionUnits should not exceed %d", FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS));
-+
-+    /* by netEnv parameters, get match vector */
-+    if (!p_SchemeParams->alwaysDirect)
-+    {
-+        p_Scheme->netEnvId = FmPcdGetNetEnvId(p_SchemeParams->netEnvParams.h_NetEnv);
-+        netEnvParams.netEnvId = p_Scheme->netEnvId;
-+        netEnvParams.numOfDistinctionUnits = p_SchemeParams->netEnvParams.numOfDistinctionUnits;
-+        memcpy(netEnvParams.unitIds, p_SchemeParams->netEnvParams.unitIds, (sizeof(uint8_t))*p_SchemeParams->netEnvParams.numOfDistinctionUnits);
-+        err = PcdGetUnitsVector(p_FmPcd, &netEnvParams);
-+        if (err)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+        p_Scheme->matchVector = netEnvParams.vector;
-+    }
-+    else
-+    {
-+        p_Scheme->matchVector = SCHEME_ALWAYS_DIRECT;
-+        p_Scheme->netEnvId = ILLEGAL_NETENV;
-+    }
-+
-+    if (p_SchemeParams->nextEngine == e_FM_PCD_INVALID)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Next Engine of the scheme is not Valid"));
-+
-+    if (p_SchemeParams->bypassFqidGeneration)
-+    {
-+#ifdef FM_KG_NO_BYPASS_FQID_GEN
-+        if ((p_FmPcd->fmRevInfo.majorRev != 4) && (p_FmPcd->fmRevInfo.majorRev < 6))
-+            RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("bypassFqidGeneration."));
-+#endif /* FM_KG_NO_BYPASS_FQID_GEN */
-+        if (p_SchemeParams->baseFqid)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("baseFqid set for a scheme that does not generate an FQID"));
-+    }
-+    else
-+        if (!p_SchemeParams->baseFqid)
-+            DBG(WARNING, ("baseFqid is 0."));
-+
-+    if (p_SchemeParams->nextEngine == e_FM_PCD_PLCR)
-+    {
-+        direct = p_SchemeParams->kgNextEngineParams.plcrProfile.direct;
-+        p_Scheme->directPlcr = direct;
-+        absolute = (bool)(p_SchemeParams->kgNextEngineParams.plcrProfile.sharedProfile ? TRUE : FALSE);
-+        if (!direct && absolute)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Indirect policing is not available when profile is shared."));
-+
-+        if (direct)
-+        {
-+            profileId = p_SchemeParams->kgNextEngineParams.plcrProfile.profileSelect.directRelativeProfileId;
-+            numOfProfiles = 1;
-+        }
-+        else
-+        {
-+            profileId = p_SchemeParams->kgNextEngineParams.plcrProfile.profileSelect.indirectProfile.fqidOffsetRelativeProfileIdBase;
-+            shift = p_SchemeParams->kgNextEngineParams.plcrProfile.profileSelect.indirectProfile.fqidOffsetShift;
-+            numOfProfiles = p_SchemeParams->kgNextEngineParams.plcrProfile.profileSelect.indirectProfile.numOfProfiles;
-+        }
-+    }
-+
-+    if (p_SchemeParams->nextEngine == e_FM_PCD_CC)
-+    {
-+#ifdef FM_KG_NO_BYPASS_PLCR_PROFILE_GEN
-+        if ((p_SchemeParams->kgNextEngineParams.cc.plcrNext) && (p_SchemeParams->kgNextEngineParams.cc.bypassPlcrProfileGeneration))
-+        {
-+            if ((p_FmPcd->fmRevInfo.majorRev != 4) && (p_FmPcd->fmRevInfo.majorRev < 6))
-+                RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("bypassPlcrProfileGeneration."));
-+        }
-+#endif /* FM_KG_NO_BYPASS_PLCR_PROFILE_GEN */
-+
-+        err = FmPcdCcGetGrpParams(p_SchemeParams->kgNextEngineParams.cc.h_CcTree,
-+                             p_SchemeParams->kgNextEngineParams.cc.grpId,
-+                             &grpBits,
-+                             &grpBase);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        p_Scheme->ccUnits = grpBits;
-+
-+        if ((p_SchemeParams->kgNextEngineParams.cc.plcrNext) &&
-+           (!p_SchemeParams->kgNextEngineParams.cc.bypassPlcrProfileGeneration))
-+        {
-+                if (p_SchemeParams->kgNextEngineParams.cc.plcrProfile.sharedProfile)
-+                    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Shared profile may not be used after Coarse classification."));
-+                absolute = FALSE;
-+                direct = p_SchemeParams->kgNextEngineParams.cc.plcrProfile.direct;
-+                if (direct)
-+                {
-+                    profileId = p_SchemeParams->kgNextEngineParams.cc.plcrProfile.profileSelect.directRelativeProfileId;
-+                    numOfProfiles = 1;
-+                }
-+                else
-+                {
-+                    profileId = p_SchemeParams->kgNextEngineParams.cc.plcrProfile.profileSelect.indirectProfile.fqidOffsetRelativeProfileIdBase;
-+                    shift = p_SchemeParams->kgNextEngineParams.cc.plcrProfile.profileSelect.indirectProfile.fqidOffsetShift;
-+                    numOfProfiles = p_SchemeParams->kgNextEngineParams.cc.plcrProfile.profileSelect.indirectProfile.numOfProfiles;
-+                }
-+        }
-+    }
-+
-+    /* if policer is used directly after KG, or after CC */
-+    if ((p_SchemeParams->nextEngine == e_FM_PCD_PLCR)  ||
-+       ((p_SchemeParams->nextEngine == e_FM_PCD_CC) &&
-+        (p_SchemeParams->kgNextEngineParams.cc.plcrNext) &&
-+        (!p_SchemeParams->kgNextEngineParams.cc.bypassPlcrProfileGeneration)))
-+    {
-+        /* if private policer profile, it may be uninitialized yet, therefore no checks are done at this stage */
-+        if (absolute)
-+        {
-+            /* for absolute direct policy only, */
-+            relativeProfileId = profileId;
-+            err = FmPcdPlcrGetAbsoluteIdByProfileParams((t_Handle)p_FmPcd,e_FM_PCD_PLCR_SHARED,NULL, relativeProfileId, &profileId);
-+            if (err)
-+                RETURN_ERROR(MAJOR, err, ("Shared profile not valid offset"));
-+            if (!FmPcdPlcrIsProfileValid(p_FmPcd, profileId))
-+                RETURN_ERROR(MINOR, E_INVALID_STATE, ("Shared profile not valid."));
-+            p_Scheme->relativeProfileId = profileId;
-+        }
-+        else
-+        {
-+            /* save relative profile id's for later check */
-+            p_Scheme->nextRelativePlcrProfile = TRUE;
-+            p_Scheme->relativeProfileId = profileId;
-+            p_Scheme->numOfProfiles = numOfProfiles;
-+        }
-+    }
-+    else
-+    {
-+        /* if policer is NOT going to be used after KG at all than if bypassFqidGeneration
-+        is set, we do not need numOfUsedExtractedOrs and hashDistributionNumOfFqids */
-+        if (p_SchemeParams->bypassFqidGeneration && p_SchemeParams->numOfUsedExtractedOrs)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                    ("numOfUsedExtractedOrs is set in a scheme that does not generate FQID or policer profile ID"));
-+        if (p_SchemeParams->bypassFqidGeneration &&
-+                p_SchemeParams->useHash &&
-+                p_SchemeParams->keyExtractAndHashParams.hashDistributionNumOfFqids)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                    ("hashDistributionNumOfFqids is set in a scheme that does not generate FQID or policer profile ID"));
-+    }
-+
-+    /* configure all 21 scheme registers */
-+    tmpReg =  KG_SCH_MODE_EN;
-+    switch (p_SchemeParams->nextEngine)
-+    {
-+        case (e_FM_PCD_PLCR):
-+            /* add to mode register - NIA */
-+            tmpReg |= KG_SCH_MODE_NIA_PLCR;
-+            tmpReg |= NIA_ENG_PLCR;
-+            tmpReg |= (uint32_t)(p_SchemeParams->kgNextEngineParams.plcrProfile.sharedProfile ? NIA_PLCR_ABSOLUTE:0);
-+            /* initialize policer profile command - */
-+            /*  configure kgse_ppc  */
-+            if (direct)
-+            /* use profileId as base, other fields are 0 */
-+                p_SchemeRegs->kgse_ppc = (uint32_t)profileId;
-+            else
-+            {
-+                if (shift > MAX_PP_SHIFT)
-+                    RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fqidOffsetShift may not be larger than %d", MAX_PP_SHIFT));
-+
-+                if (!numOfProfiles || !POWER_OF_2(numOfProfiles))
-+                    RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("numOfProfiles must not be 0 and must be a power of 2"));
-+
-+                ppcTmp = ((uint32_t)shift << KG_SCH_PP_SHIFT_HIGH_SHIFT) & KG_SCH_PP_SHIFT_HIGH;
-+                ppcTmp |= ((uint32_t)shift << KG_SCH_PP_SHIFT_LOW_SHIFT) & KG_SCH_PP_SHIFT_LOW;
-+                ppcTmp |= ((uint32_t)(numOfProfiles-1) << KG_SCH_PP_MASK_SHIFT);
-+                ppcTmp |= (uint32_t)profileId;
-+
-+                p_SchemeRegs->kgse_ppc = ppcTmp;
-+            }
-+            break;
-+        case (e_FM_PCD_CC):
-+            /* mode reg - define NIA */
-+            tmpReg |= (NIA_ENG_FM_CTL | NIA_FM_CTL_AC_CC);
-+
-+            p_SchemeRegs->kgse_ccbs = grpBits;
-+            tmpReg |= (uint32_t)(grpBase << KG_SCH_MODE_CCOBASE_SHIFT);
-+
-+            if (p_SchemeParams->kgNextEngineParams.cc.plcrNext)
-+            {
-+                if (!p_SchemeParams->kgNextEngineParams.cc.bypassPlcrProfileGeneration)
-+                {
-+                    /* find out if absolute or relative */
-+                    if (absolute)
-+                         RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("It is illegal to request a shared profile in a scheme that is in a KG->CC->PLCR flow"));
-+                    if (direct)
-+                    {
-+                        /* mask = 0, base = directProfileId */
-+                        p_SchemeRegs->kgse_ppc = (uint32_t)profileId;
-+                    }
-+                    else
-+                    {
-+                        if (shift > MAX_PP_SHIFT)
-+                            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fqidOffsetShift may not be larger than %d", MAX_PP_SHIFT));
-+                        if (!numOfProfiles || !POWER_OF_2(numOfProfiles))
-+                            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("numOfProfiles must not be 0 and must be a power of 2"));
-+
-+                        ppcTmp = ((uint32_t)shift << KG_SCH_PP_SHIFT_HIGH_SHIFT) & KG_SCH_PP_SHIFT_HIGH;
-+                        ppcTmp |= ((uint32_t)shift << KG_SCH_PP_SHIFT_LOW_SHIFT) & KG_SCH_PP_SHIFT_LOW;
-+                        ppcTmp |= ((uint32_t)(numOfProfiles-1) << KG_SCH_PP_MASK_SHIFT);
-+                        ppcTmp |= (uint32_t)profileId;
-+
-+                        p_SchemeRegs->kgse_ppc = ppcTmp;
-+                    }
-+                }
-+            }
-+            break;
-+        case (e_FM_PCD_DONE):
-+            if (p_SchemeParams->kgNextEngineParams.doneAction == e_FM_PCD_DROP_FRAME)
-+                tmpReg |= GET_NIA_BMI_AC_DISCARD_FRAME(p_FmPcd);
-+            else
-+                tmpReg |= GET_NIA_BMI_AC_ENQ_FRAME(p_FmPcd);
-+            break;
-+        default:
-+             RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("Next engine not supported"));
-+    }
-+    p_SchemeRegs->kgse_mode = tmpReg;
-+
-+    p_SchemeRegs->kgse_mv = p_Scheme->matchVector;
-+
-+#if (DPAA_VERSION >= 11)
-+    if (p_SchemeParams->overrideStorageProfile)
-+    {
-+        p_SchemeRegs->kgse_om |= KG_SCH_OM_VSPE;
-+
-+        if (p_SchemeParams->storageProfile.direct)
-+        {
-+            profileId = p_SchemeParams->storageProfile.profileSelect.directRelativeProfileId;
-+            shift = 0;
-+            numOfProfiles = 1;
-+        }
-+        else
-+        {
-+            profileId = p_SchemeParams->storageProfile.profileSelect.indirectProfile.fqidOffsetRelativeProfileIdBase;
-+            shift = p_SchemeParams->storageProfile.profileSelect.indirectProfile.fqidOffsetShift;
-+            numOfProfiles = p_SchemeParams->storageProfile.profileSelect.indirectProfile.numOfProfiles;
-+        }
-+        if (shift > MAX_SP_SHIFT)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fqidOffsetShift may not be larger than %d", MAX_SP_SHIFT));
-+
-+        if (!numOfProfiles || !POWER_OF_2(numOfProfiles))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("numOfProfiles must not be 0 and must be a power of 2"));
-+
-+        tmpReg = (uint32_t)shift << KG_SCH_VSP_SHIFT;
-+        tmpReg |= ((uint32_t)(numOfProfiles-1) << KG_SCH_VSP_MASK_SHIFT);
-+        tmpReg |= (uint32_t)profileId;
-+
-+
-+        p_SchemeRegs->kgse_vsp = tmpReg;
-+
-+        p_Scheme->vspe = TRUE;
-+
-+    }
-+    else
-+        p_SchemeRegs->kgse_vsp = KG_SCH_VSP_NO_KSP_EN;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    if (p_SchemeParams->useHash)
-+    {
-+        p_KeyAndHash = &p_SchemeParams->keyExtractAndHashParams;
-+
-+        if (p_KeyAndHash->numOfUsedExtracts >= FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY)
-+             RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("numOfUsedExtracts out of range"));
-+
-+        /*  configure kgse_dv0  */
-+        p_SchemeRegs->kgse_dv0 = p_KeyAndHash->privateDflt0;
-+
-+        /*  configure kgse_dv1  */
-+        p_SchemeRegs->kgse_dv1 = p_KeyAndHash->privateDflt1;
-+
-+        if (!p_SchemeParams->bypassFqidGeneration)
-+        {
-+            if (!p_KeyAndHash->hashDistributionNumOfFqids || !POWER_OF_2(p_KeyAndHash->hashDistributionNumOfFqids))
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("hashDistributionNumOfFqids must not be 0 and must be a power of 2"));
-+            if ((p_KeyAndHash->hashDistributionNumOfFqids-1) & p_SchemeParams->baseFqid)
-+                DBG(WARNING, ("baseFqid unaligned. Distribution may result in less than hashDistributionNumOfFqids queues."));
-+        }
-+
-+        /*  configure kgse_ekdv  */
-+        tmpReg = 0;
-+        for ( i=0 ;i<p_KeyAndHash->numOfUsedDflts ; i++)
-+        {
-+            switch (p_KeyAndHash->dflts[i].type)
-+            {
-+                case (e_FM_PCD_KG_MAC_ADDR):
-+                    tmpReg |= (p_KeyAndHash->dflts[i].dfltSelect << KG_SCH_DEF_MAC_ADDR_SHIFT);
-+                    break;
-+                case (e_FM_PCD_KG_TCI):
-+                    tmpReg |= (p_KeyAndHash->dflts[i].dfltSelect << KG_SCH_DEF_TCI_SHIFT);
-+                    break;
-+                case (e_FM_PCD_KG_ENET_TYPE):
-+                    tmpReg |= (p_KeyAndHash->dflts[i].dfltSelect << KG_SCH_DEF_ENET_TYPE_SHIFT);
-+                    break;
-+                case (e_FM_PCD_KG_PPP_SESSION_ID):
-+                    tmpReg |= (p_KeyAndHash->dflts[i].dfltSelect << KG_SCH_DEF_PPP_SESSION_ID_SHIFT);
-+                    break;
-+                case (e_FM_PCD_KG_PPP_PROTOCOL_ID):
-+                    tmpReg |= (p_KeyAndHash->dflts[i].dfltSelect << KG_SCH_DEF_PPP_PROTOCOL_ID_SHIFT);
-+                    break;
-+                case (e_FM_PCD_KG_MPLS_LABEL):
-+                    tmpReg |= (p_KeyAndHash->dflts[i].dfltSelect << KG_SCH_DEF_MPLS_LABEL_SHIFT);
-+                    break;
-+                case (e_FM_PCD_KG_IP_ADDR):
-+                    tmpReg |= (p_KeyAndHash->dflts[i].dfltSelect << KG_SCH_DEF_IP_ADDR_SHIFT);
-+                    break;
-+                case (e_FM_PCD_KG_PROTOCOL_TYPE):
-+                    tmpReg |= (p_KeyAndHash->dflts[i].dfltSelect << KG_SCH_DEF_PROTOCOL_TYPE_SHIFT);
-+                    break;
-+                case (e_FM_PCD_KG_IP_TOS_TC):
-+                    tmpReg |= (p_KeyAndHash->dflts[i].dfltSelect << KG_SCH_DEF_IP_TOS_TC_SHIFT);
-+                    break;
-+                case (e_FM_PCD_KG_IPV6_FLOW_LABEL):
-+                    tmpReg |= (p_KeyAndHash->dflts[i].dfltSelect << KG_SCH_DEF_L4_PORT_SHIFT);
-+                    break;
-+                case (e_FM_PCD_KG_IPSEC_SPI):
-+                    tmpReg |= (p_KeyAndHash->dflts[i].dfltSelect << KG_SCH_DEF_IPSEC_SPI_SHIFT);
-+                    break;
-+                case (e_FM_PCD_KG_L4_PORT):
-+                    tmpReg |= (p_KeyAndHash->dflts[i].dfltSelect << KG_SCH_DEF_L4_PORT_SHIFT);
-+                    break;
-+                case (e_FM_PCD_KG_TCP_FLAG):
-+                    tmpReg |= (p_KeyAndHash->dflts[i].dfltSelect << KG_SCH_DEF_TCP_FLAG_SHIFT);
-+                    break;
-+                case (e_FM_PCD_KG_GENERIC_FROM_DATA):
-+                    swDefaults[numOfSwDefaults].type = e_FM_PCD_KG_GENERIC_FROM_DATA;
-+                    swDefaults[numOfSwDefaults].dfltSelect = p_KeyAndHash->dflts[i].dfltSelect;
-+                    numOfSwDefaults ++;
-+                    break;
-+                case (e_FM_PCD_KG_GENERIC_FROM_DATA_NO_V):
-+                    swDefaults[numOfSwDefaults].type = e_FM_PCD_KG_GENERIC_FROM_DATA_NO_V;
-+                    swDefaults[numOfSwDefaults].dfltSelect = p_KeyAndHash->dflts[i].dfltSelect;
-+                    numOfSwDefaults ++;
-+                    break;
-+                case (e_FM_PCD_KG_GENERIC_NOT_FROM_DATA):
-+                    swDefaults[numOfSwDefaults].type = e_FM_PCD_KG_GENERIC_NOT_FROM_DATA;
-+                    swDefaults[numOfSwDefaults].dfltSelect = p_KeyAndHash->dflts[i].dfltSelect;
-+                    numOfSwDefaults ++;
-+                   break;
-+                default:
-+                    RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+            }
-+        }
-+        p_SchemeRegs->kgse_ekdv = tmpReg;
-+
-+        p_LocalExtractsArray = (t_FmPcdKgSchemesExtracts *)XX_Malloc(sizeof(t_FmPcdKgSchemesExtracts));
-+        if (!p_LocalExtractsArray)
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, ("No memory"));
-+
-+        /*  configure kgse_ekfc and  kgse_gec */
-+        knownTmp = 0;
-+        for ( i=0 ;i<p_KeyAndHash->numOfUsedExtracts ; i++)
-+        {
-+            p_Extract = &p_KeyAndHash->extractArray[i];
-+            switch (p_Extract->type)
-+            {
-+                case (e_FM_PCD_KG_EXTRACT_PORT_PRIVATE_INFO):
-+                    knownTmp |= KG_SCH_KN_PORT_ID;
-+                    /* save in driver structure */
-+                    p_LocalExtractsArray->extractsArray[i].id = GetKnownFieldId(KG_SCH_KN_PORT_ID);
-+                    p_LocalExtractsArray->extractsArray[i].known = TRUE;
-+                    break;
-+                case (e_FM_PCD_EXTRACT_BY_HDR):
-+                    switch (p_Extract->extractByHdr.hdr)
-+                    {
-+#if (DPAA_VERSION >= 11) || ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+                        case (HEADER_TYPE_UDP_LITE):
-+                            p_Extract->extractByHdr.hdr = HEADER_TYPE_UDP;
-+                            break;
-+#endif /* (DPAA_VERSION >= 11) || ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
-+                        case (HEADER_TYPE_UDP_ENCAP_ESP):
-+                            switch (p_Extract->extractByHdr.type)
-+                            {
-+                                case (e_FM_PCD_EXTRACT_FROM_HDR):
-+                                    /* case where extraction from ESP only */
-+                                    if (p_Extract->extractByHdr.extractByHdrType.fromHdr.offset >= UDP_HEADER_SIZE)
-+                                    {
-+                                        p_Extract->extractByHdr.hdr = FmPcdGetAliasHdr(p_FmPcd, p_Scheme->netEnvId, HEADER_TYPE_UDP_ENCAP_ESP);
-+                                        p_Extract->extractByHdr.extractByHdrType.fromHdr.offset -= UDP_HEADER_SIZE;
-+                                        p_Extract->extractByHdr.ignoreProtocolValidation = TRUE;
-+                                    }
-+                                    else
-+                                    {
-+                                        p_Extract->extractByHdr.hdr = HEADER_TYPE_UDP;
-+                                        p_Extract->extractByHdr.ignoreProtocolValidation = FALSE;
-+                                    }
-+                                    break;
-+                                case (e_FM_PCD_EXTRACT_FROM_FIELD):
-+                                    switch (p_Extract->extractByHdr.extractByHdrType.fromField.field.udpEncapEsp)
-+                                    {
-+                                        case (NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC):
-+                                        case (NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_DST):
-+                                        case (NET_HEADER_FIELD_UDP_ENCAP_ESP_LEN):
-+                                        case (NET_HEADER_FIELD_UDP_ENCAP_ESP_CKSUM):
-+                                            p_Extract->extractByHdr.hdr = HEADER_TYPE_UDP;
-+                                            break;
-+                                        case (NET_HEADER_FIELD_UDP_ENCAP_ESP_SPI):
-+                                            p_Extract->extractByHdr.type = e_FM_PCD_EXTRACT_FROM_HDR;
-+                                            p_Extract->extractByHdr.hdr = FmPcdGetAliasHdr(p_FmPcd, p_Scheme->netEnvId, HEADER_TYPE_UDP_ENCAP_ESP);
-+                                            /*p_Extract->extractByHdr.extractByHdrType.fromField.offset += ESP_SPI_OFFSET;*/
-+                                            p_Extract->extractByHdr.ignoreProtocolValidation = TRUE;
-+                                            break;
-+                                        case (NET_HEADER_FIELD_UDP_ENCAP_ESP_SEQUENCE_NUM):
-+                                            p_Extract->extractByHdr.type = e_FM_PCD_EXTRACT_FROM_HDR;
-+                                            p_Extract->extractByHdr.hdr = FmPcdGetAliasHdr(p_FmPcd, p_Scheme->netEnvId, HEADER_TYPE_UDP_ENCAP_ESP);
-+                                            p_Extract->extractByHdr.extractByHdrType.fromField.offset += ESP_SEQ_NUM_OFFSET;
-+                                            p_Extract->extractByHdr.ignoreProtocolValidation = TRUE;
-+                                            break;
-+                                    }
-+                                    break;
-+                                case (e_FM_PCD_EXTRACT_FULL_FIELD):
-+                                    switch (p_Extract->extractByHdr.extractByHdrType.fullField.udpEncapEsp)
-+                                    {
-+                                        case (NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC):
-+                                        case (NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_DST):
-+                                        case (NET_HEADER_FIELD_UDP_ENCAP_ESP_LEN):
-+                                        case (NET_HEADER_FIELD_UDP_ENCAP_ESP_CKSUM):
-+                                            p_Extract->extractByHdr.hdr = HEADER_TYPE_UDP;
-+                                            break;
-+                                        case (NET_HEADER_FIELD_UDP_ENCAP_ESP_SPI):
-+                                            p_Extract->extractByHdr.type = e_FM_PCD_EXTRACT_FROM_HDR;
-+                                            p_Extract->extractByHdr.hdr = FmPcdGetAliasHdr(p_FmPcd, p_Scheme->netEnvId, HEADER_TYPE_UDP_ENCAP_ESP);
-+                                            p_Extract->extractByHdr.extractByHdrType.fromHdr.size = ESP_SPI_SIZE;
-+                                            p_Extract->extractByHdr.extractByHdrType.fromHdr.offset = ESP_SPI_OFFSET;
-+                                            p_Extract->extractByHdr.ignoreProtocolValidation = TRUE;
-+                                            break;
-+                                        case (NET_HEADER_FIELD_UDP_ENCAP_ESP_SEQUENCE_NUM):
-+                                            p_Extract->extractByHdr.type = e_FM_PCD_EXTRACT_FROM_HDR;
-+                                            p_Extract->extractByHdr.hdr = FmPcdGetAliasHdr(p_FmPcd, p_Scheme->netEnvId, HEADER_TYPE_UDP_ENCAP_ESP);
-+                                            p_Extract->extractByHdr.extractByHdrType.fromHdr.size = ESP_SEQ_NUM_SIZE;
-+                                            p_Extract->extractByHdr.extractByHdrType.fromHdr.offset = ESP_SEQ_NUM_OFFSET;
-+                                            p_Extract->extractByHdr.ignoreProtocolValidation = TRUE;
-+                                            break;
-+                                    }
-+                                    break;
-+                            }
-+                            break;
-+                        default:
-+                            break;
-+                    }
-+                    switch (p_Extract->extractByHdr.type)
-+                    {
-+                        case (e_FM_PCD_EXTRACT_FROM_HDR):
-+                            generic = TRUE;
-+                            /* get the header code for the generic extract */
-+                            code = GetGenHdrCode(p_Extract->extractByHdr.hdr, p_Extract->extractByHdr.hdrIndex, p_Extract->extractByHdr.ignoreProtocolValidation);
-+                            /* set generic register fields */
-+                            offset = p_Extract->extractByHdr.extractByHdrType.fromHdr.offset;
-+                            size = p_Extract->extractByHdr.extractByHdrType.fromHdr.size;
-+                            break;
-+                        case (e_FM_PCD_EXTRACT_FROM_FIELD):
-+                            generic = TRUE;
-+                            /* get the field code for the generic extract */
-+                            code = GetGenFieldCode(p_Extract->extractByHdr.hdr,
-+                                        p_Extract->extractByHdr.extractByHdrType.fromField.field, p_Extract->extractByHdr.ignoreProtocolValidation,p_Extract->extractByHdr.hdrIndex);
-+                            offset = p_Extract->extractByHdr.extractByHdrType.fromField.offset;
-+                            size = p_Extract->extractByHdr.extractByHdrType.fromField.size;
-+                            break;
-+                        case (e_FM_PCD_EXTRACT_FULL_FIELD):
-+                            if (!p_Extract->extractByHdr.ignoreProtocolValidation)
-+                            {
-+                                /* if we have a known field for it - use it, otherwise use generic */
-+                                bitMask = GetKnownProtMask(p_FmPcd, p_Extract->extractByHdr.hdr, p_Extract->extractByHdr.hdrIndex,
-+                                            p_Extract->extractByHdr.extractByHdrType.fullField);
-+                                if (bitMask)
-+                                {
-+                                    knownTmp |= bitMask;
-+                                    /* save in driver structure */
-+                                    p_LocalExtractsArray->extractsArray[i].id = GetKnownFieldId(bitMask);
-+                                    p_LocalExtractsArray->extractsArray[i].known = TRUE;
-+                                }
-+                                else
-+                                    generic = TRUE;
-+                            }
-+                            else
-+                                generic = TRUE;
-+                            if (generic)
-+                            {
-+                                /* tmp - till we cover more headers under generic */
-+                                XX_Free(p_LocalExtractsArray);
-+                                RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("Full header selection not supported"));
-+                            }
-+                            break;
-+                        default:
-+                            XX_Free(p_LocalExtractsArray);
-+                            RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+                    }
-+                    break;
-+                case (e_FM_PCD_EXTRACT_NON_HDR):
-+                    /* use generic */
-+                    generic = TRUE;
-+                    offset = 0;
-+                    /* get the field code for the generic extract */
-+                    code = GetGenCode(p_Extract->extractNonHdr.src, &offset);
-+                    offset += p_Extract->extractNonHdr.offset;
-+                    size = p_Extract->extractNonHdr.size;
-+                    break;
-+                default:
-+                    RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+            }
-+
-+            if (generic)
-+            {
-+                /* set generic register fields */
-+                if (currGenId >= FM_KG_NUM_OF_GENERIC_REGS)
-+                {
-+                    XX_Free(p_LocalExtractsArray);
-+                    RETURN_ERROR(MAJOR, E_FULL, ("Generic registers are fully used"));
-+                }
-+                if (!code)
-+                {
-+                    XX_Free(p_LocalExtractsArray);
-+                    RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, NO_MSG);
-+                }
-+
-+                genTmp = KG_SCH_GEN_VALID;
-+                genTmp |= (uint32_t)(code << KG_SCH_GEN_HT_SHIFT);
-+                genTmp |= offset;
-+                if ((size > MAX_KG_SCH_SIZE) || (size < 1))
-+                {
-+                    XX_Free(p_LocalExtractsArray);
-+                    RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal extraction (size out of range)"));
-+                }
-+                genTmp |= (uint32_t)((size - 1) << KG_SCH_GEN_SIZE_SHIFT);
-+                swDefault = GetGenericSwDefault(swDefaults, numOfSwDefaults, code);
-+                if (swDefault == e_FM_PCD_KG_DFLT_ILLEGAL)
-+                    DBG(WARNING, ("No sw default configured"));
-+                else
-+                    genTmp |= swDefault << KG_SCH_GEN_DEF_SHIFT;
-+
-+                genTmp |= KG_SCH_GEN_MASK;
-+                p_SchemeRegs->kgse_gec[currGenId] = genTmp;
-+                /* save in driver structure */
-+                p_LocalExtractsArray->extractsArray[i].id = currGenId++;
-+                p_LocalExtractsArray->extractsArray[i].known = FALSE;
-+                generic = FALSE;
-+            }
-+        }
-+        p_SchemeRegs->kgse_ekfc = knownTmp;
-+
-+        selectTmp = 0;
-+        maskTmp = 0xFFFFFFFF;
-+        /*  configure kgse_bmch, kgse_bmcl and kgse_fqb */
-+
-+        if (p_KeyAndHash->numOfUsedMasks > FM_PCD_KG_NUM_OF_EXTRACT_MASKS)
-+        {
-+            XX_Free(p_LocalExtractsArray);
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Only %d masks supported", FM_PCD_KG_NUM_OF_EXTRACT_MASKS));
-+        }
-+        for ( i=0 ;i<p_KeyAndHash->numOfUsedMasks ; i++)
-+        {
-+            /* Get the relative id of the extract (for known 0-0x1f, for generic 0-7) */
-+            id = p_LocalExtractsArray->extractsArray[p_KeyAndHash->masks[i].extractArrayIndex].id;
-+            /* Get the shift of the select field (depending on i) */
-+            GET_MASK_SEL_SHIFT(shift,i);
-+            if (p_LocalExtractsArray->extractsArray[p_KeyAndHash->masks[i].extractArrayIndex].known)
-+                selectTmp |= id << shift;
-+            else
-+                selectTmp |= (id + MASK_FOR_GENERIC_BASE_ID) << shift;
-+
-+            /* Get the shift of the offset field (depending on i) - may
-+               be in  kgse_bmch or in kgse_fqb (depending on i) */
-+            GET_MASK_OFFSET_SHIFT(shift,i);
-+            if (i<=1)
-+                selectTmp |= p_KeyAndHash->masks[i].offset << shift;
-+            else
-+                fqbTmp |= p_KeyAndHash->masks[i].offset << shift;
-+
-+            /* Get the shift of the mask field (depending on i) */
-+            GET_MASK_SHIFT(shift,i);
-+            /* pass all bits */
-+            maskTmp |= KG_SCH_BITMASK_MASK << shift;
-+            /* clear bits that need masking */
-+            maskTmp &= ~(0xFF << shift) ;
-+            /* set mask bits */
-+            maskTmp |= (p_KeyAndHash->masks[i].mask << shift) ;
-+        }
-+        p_SchemeRegs->kgse_bmch = selectTmp;
-+        p_SchemeRegs->kgse_bmcl = maskTmp;
-+        /* kgse_fqb will be written t the end of the routine */
-+
-+        /*  configure kgse_hc  */
-+        if (p_KeyAndHash->hashShift > MAX_HASH_SHIFT)
-+        {
-+            XX_Free(p_LocalExtractsArray);
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("hashShift must not be larger than %d", MAX_HASH_SHIFT));
-+        }
-+        if (p_KeyAndHash->hashDistributionFqidsShift > MAX_DIST_FQID_SHIFT)
-+        {
-+            XX_Free(p_LocalExtractsArray);
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("hashDistributionFqidsShift must not be larger than %d", MAX_DIST_FQID_SHIFT));
-+        }
-+
-+        tmpReg = 0;
-+
-+        tmpReg |= ((p_KeyAndHash->hashDistributionNumOfFqids - 1) << p_KeyAndHash->hashDistributionFqidsShift);
-+        tmpReg |= p_KeyAndHash->hashShift << KG_SCH_HASH_CONFIG_SHIFT_SHIFT;
-+
-+        if (p_KeyAndHash->symmetricHash)
-+        {
-+            if ((!!(p_SchemeRegs->kgse_ekfc & KG_SCH_KN_MACSRC) != !!(p_SchemeRegs->kgse_ekfc & KG_SCH_KN_MACDST)) ||
-+                    (!!(p_SchemeRegs->kgse_ekfc & KG_SCH_KN_IPSRC1) != !!(p_SchemeRegs->kgse_ekfc & KG_SCH_KN_IPDST1)) ||
-+                    (!!(p_SchemeRegs->kgse_ekfc & KG_SCH_KN_IPSRC2) != !!(p_SchemeRegs->kgse_ekfc & KG_SCH_KN_IPDST2)) ||
-+                    (!!(p_SchemeRegs->kgse_ekfc & KG_SCH_KN_L4PSRC) != !!(p_SchemeRegs->kgse_ekfc & KG_SCH_KN_L4PDST)))
-+            {
-+                XX_Free(p_LocalExtractsArray);
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("symmetricHash set but src/dest extractions missing"));
-+            }
-+            tmpReg |= KG_SCH_HASH_CONFIG_SYM;
-+        }
-+        p_SchemeRegs->kgse_hc = tmpReg;
-+
-+        /* build the return array describing the order of the extractions */
-+
-+        /* the last currGenId places of the array
-+           are for generic extracts that are always last.
-+           We now sort for the calculation of the order of the known
-+           extractions we sort the known extracts between orderedArray[0] and
-+           orderedArray[p_KeyAndHash->numOfUsedExtracts - currGenId - 1].
-+           for the calculation of the order of the generic extractions we use:
-+           num_of_generic - currGenId
-+           num_of_known - p_KeyAndHash->numOfUsedExtracts - currGenId
-+           first_generic_index = num_of_known */
-+        curr = 0;
-+        for (i=0;i<p_KeyAndHash->numOfUsedExtracts ; i++)
-+        {
-+            if (p_LocalExtractsArray->extractsArray[i].known)
-+            {
-+                ASSERT_COND(curr<(p_KeyAndHash->numOfUsedExtracts - currGenId));
-+                j = curr;
-+                /* id is the extract id (port id = 0, mac src = 1 etc.). the value in the array is the original
-+                index in the user's extractions array */
-+                /* we compare the id of the current extract with the id of the extract in the orderedArray[j-1]
-+                location */
-+                while ((j > 0) && (p_LocalExtractsArray->extractsArray[i].id <
-+                      p_LocalExtractsArray->extractsArray[p_Scheme->orderedArray[j-1]].id))
-+                {
-+                    p_Scheme->orderedArray[j] =
-+                        p_Scheme->orderedArray[j-1];
-+                    j--;
-+                }
-+                p_Scheme->orderedArray[j] = (uint8_t)i;
-+                curr++;
-+            }
-+            else
-+            {
-+                /* index is first_generic_index + generic index (id) */
-+                idx = (uint8_t)(p_KeyAndHash->numOfUsedExtracts - currGenId + p_LocalExtractsArray->extractsArray[i].id);
-+                ASSERT_COND(idx < FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY);
-+                p_Scheme->orderedArray[idx]= (uint8_t)i;
-+            }
-+        }
-+        XX_Free(p_LocalExtractsArray);
-+    }
-+    else
-+    {
-+        /* clear all unused registers: */
-+        p_SchemeRegs->kgse_ekfc = 0;
-+        p_SchemeRegs->kgse_ekdv = 0;
-+        p_SchemeRegs->kgse_bmch = 0;
-+        p_SchemeRegs->kgse_bmcl = 0;
-+        p_SchemeRegs->kgse_hc = 0;
-+        p_SchemeRegs->kgse_dv0 = 0;
-+        p_SchemeRegs->kgse_dv1 = 0;
-+    }
-+
-+    if (p_SchemeParams->bypassFqidGeneration)
-+        p_SchemeRegs->kgse_hc |= KG_SCH_HASH_CONFIG_NO_FQID;
-+
-+    /*  configure kgse_spc  */
-+    if ( p_SchemeParams->schemeCounter.update)
-+        p_SchemeRegs->kgse_spc = p_SchemeParams->schemeCounter.value;
-+
-+
-+    /* check that are enough generic registers */
-+    if (p_SchemeParams->numOfUsedExtractedOrs + currGenId > FM_KG_NUM_OF_GENERIC_REGS)
-+        RETURN_ERROR(MAJOR, E_FULL, ("Generic registers are fully used"));
-+
-+    /* extracted OR mask on Qid */
-+    for ( i=0 ;i<p_SchemeParams->numOfUsedExtractedOrs ; i++)
-+    {
-+
-+        p_Scheme->extractedOrs = TRUE;
-+        /*  configure kgse_gec[i]  */
-+        p_ExtractOr = &p_SchemeParams->extractedOrs[i];
-+        switch (p_ExtractOr->type)
-+        {
-+            case (e_FM_PCD_KG_EXTRACT_PORT_PRIVATE_INFO):
-+                code = KG_SCH_GEN_PARSE_RESULT_N_FQID;
-+                offset = 0;
-+                break;
-+            case (e_FM_PCD_EXTRACT_BY_HDR):
-+                /* get the header code for the generic extract */
-+                code = GetGenHdrCode(p_ExtractOr->extractByHdr.hdr, p_ExtractOr->extractByHdr.hdrIndex, p_ExtractOr->extractByHdr.ignoreProtocolValidation);
-+                /* set generic register fields */
-+                offset = p_ExtractOr->extractionOffset;
-+                break;
-+            case (e_FM_PCD_EXTRACT_NON_HDR):
-+                /* get the field code for the generic extract */
-+                offset = 0;
-+                code = GetGenCode(p_ExtractOr->src, &offset);
-+                offset += p_ExtractOr->extractionOffset;
-+                break;
-+            default:
-+                RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+        }
-+
-+        /* set generic register fields */
-+        if (!code)
-+            RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, NO_MSG);
-+        genTmp = KG_SCH_GEN_EXTRACT_TYPE | KG_SCH_GEN_VALID;
-+        genTmp |= (uint32_t)(code << KG_SCH_GEN_HT_SHIFT);
-+        genTmp |= offset;
-+        if (!!p_ExtractOr->bitOffsetInFqid == !!p_ExtractOr->bitOffsetInPlcrProfile)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, (" extracted byte must effect either FQID or Policer profile"));
-+
-+        /************************************************************************************
-+            bitOffsetInFqid and bitOffsetInPolicerProfile are translated to rotate parameter
-+            in the following way:
-+
-+            Driver API and implementation:
-+            ==============================
-+            FQID: extracted OR byte may be shifted right 1-31 bits to effect parts of the FQID.
-+            if shifted less than 8 bits, or more than 24 bits a mask is set on the bits that
-+            are not overlapping FQID.
-+                     ------------------------
-+                    |      FQID (24)         |
-+                     ------------------------
-+            --------
-+           |        |  extracted OR byte
-+            --------
-+
-+            Policer Profile: extracted OR byte may be shifted right 1-15 bits to effect parts of the
-+            PP id. Unless shifted exactly 8 bits to overlap the PP id, a mask is set on the bits that
-+            are not overlapping PP id.
-+
-+                     --------
-+                    | PP (8) |
-+                     --------
-+            --------
-+           |        |  extracted OR byte
-+            --------
-+
-+            HW implementation
-+            =================
-+            FQID and PP construct a 32 bit word in the way describe below. Extracted byte is located
-+            as the highest byte of that word and may be rotated to effect any part os the FQID or
-+            the PP.
-+             ------------------------  --------
-+            |      FQID (24)         || PP (8) |
-+             ------------------------  --------
-+             --------
-+            |        |  extracted OR byte
-+             --------
-+
-+        ************************************************************************************/
-+
-+        if (p_ExtractOr->bitOffsetInFqid)
-+        {
-+            if (p_ExtractOr->bitOffsetInFqid > MAX_KG_SCH_FQID_BIT_OFFSET )
-+              RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal extraction (bitOffsetInFqid out of range)"));
-+            if (p_ExtractOr->bitOffsetInFqid<8)
-+                genTmp |= (uint32_t)((p_ExtractOr->bitOffsetInFqid+24) << KG_SCH_GEN_SIZE_SHIFT);
-+            else
-+                genTmp |= (uint32_t)((p_ExtractOr->bitOffsetInFqid-8) << KG_SCH_GEN_SIZE_SHIFT);
-+            p_ExtractOr->mask &= GetExtractedOrMask(p_ExtractOr->bitOffsetInFqid, TRUE);
-+        }
-+        else /* effect policer profile */
-+        {
-+            if (p_ExtractOr->bitOffsetInPlcrProfile > MAX_KG_SCH_PP_BIT_OFFSET )
-+              RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal extraction (bitOffsetInPlcrProfile out of range)"));
-+            p_Scheme->bitOffsetInPlcrProfile = p_ExtractOr->bitOffsetInPlcrProfile;
-+            genTmp |= (uint32_t)((p_ExtractOr->bitOffsetInPlcrProfile+16) << KG_SCH_GEN_SIZE_SHIFT);
-+            p_ExtractOr->mask &= GetExtractedOrMask(p_ExtractOr->bitOffsetInPlcrProfile, FALSE);
-+        }
-+
-+        genTmp |= (uint32_t)(p_ExtractOr->extractionOffset << KG_SCH_GEN_DEF_SHIFT);
-+        /* clear bits that need masking */
-+        genTmp &= ~KG_SCH_GEN_MASK ;
-+        /* set mask bits */
-+        genTmp |= (uint32_t)(p_ExtractOr->mask << KG_SCH_GEN_MASK_SHIFT);
-+        p_SchemeRegs->kgse_gec[currGenId++] = genTmp;
-+
-+    }
-+    /* clear all unused GEC registers */
-+    for ( i=currGenId ;i<FM_KG_NUM_OF_GENERIC_REGS ; i++)
-+        p_SchemeRegs->kgse_gec[i] = 0;
-+
-+    /* add base Qid for this scheme */
-+    /* add configuration for kgse_fqb */
-+    if (p_SchemeParams->baseFqid & ~0x00FFFFFF)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("baseFqid must be between 1 and 2^24-1"));
-+
-+    fqbTmp |= p_SchemeParams->baseFqid;
-+    p_SchemeRegs->kgse_fqb = fqbTmp;
-+
-+    p_Scheme->nextEngine = p_SchemeParams->nextEngine;
-+    p_Scheme->doneAction = p_SchemeParams->kgNextEngineParams.doneAction;
-+
-+    return E_OK;
-+}
-+
-+
-+/*****************************************************************************/
-+/*              Inter-module API routines                                    */
-+/*****************************************************************************/
-+
-+t_Error FmPcdKgBuildClsPlanGrp(t_Handle h_FmPcd, t_FmPcdKgInterModuleClsPlanGrpParams *p_Grp, t_FmPcdKgInterModuleClsPlanSet *p_ClsPlanSet)
-+{
-+    t_FmPcd                         *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    t_FmPcdKgClsPlanGrp             *p_ClsPlanGrp;
-+    t_FmPcdIpcKgClsPlanParams       kgAlloc;
-+    t_Error                         err = E_OK;
-+    uint32_t                        oredVectors = 0;
-+    int                             i, j;
-+
-+    /* this routine is protected by the calling routine ! */
-+    if (p_Grp->numOfOptions >= FM_PCD_MAX_NUM_OF_OPTIONS(FM_PCD_MAX_NUM_OF_CLS_PLANS))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,("Too many classification plan basic options selected."));
-+
-+    /* find a new clsPlan group */
-+    for (i = 0; i < FM_MAX_NUM_OF_PORTS; i++)
-+        if (!p_FmPcd->p_FmPcdKg->clsPlanGrps[i].used)
-+            break;
-+    if (i == FM_MAX_NUM_OF_PORTS)
-+        RETURN_ERROR(MAJOR, E_FULL,("No classification plan groups available."));
-+
-+    p_FmPcd->p_FmPcdKg->clsPlanGrps[i].used = TRUE;
-+
-+    p_Grp->clsPlanGrpId = (uint8_t)i;
-+
-+    if (p_Grp->numOfOptions == 0)
-+        p_FmPcd->p_FmPcdKg->emptyClsPlanGrpId = (uint8_t)i;
-+
-+    p_ClsPlanGrp = &p_FmPcd->p_FmPcdKg->clsPlanGrps[i];
-+    p_ClsPlanGrp->netEnvId = p_Grp->netEnvId;
-+    p_ClsPlanGrp->owners = 0;
-+    FmPcdSetClsPlanGrpId(p_FmPcd, p_Grp->netEnvId, p_Grp->clsPlanGrpId);
-+    if (p_Grp->numOfOptions != 0)
-+        FmPcdIncNetEnvOwners(p_FmPcd, p_Grp->netEnvId);
-+
-+    p_ClsPlanGrp->sizeOfGrp = (uint16_t)(1 << p_Grp->numOfOptions);
-+    /* a minimal group of 8 is required */
-+    if (p_ClsPlanGrp->sizeOfGrp < CLS_PLAN_NUM_PER_GRP)
-+        p_ClsPlanGrp->sizeOfGrp = CLS_PLAN_NUM_PER_GRP;
-+    if (p_FmPcd->guestId == NCSW_MASTER_ID)
-+    {
-+        err = KgAllocClsPlanEntries(h_FmPcd, p_ClsPlanGrp->sizeOfGrp, p_FmPcd->guestId, &p_ClsPlanGrp->baseEntry);
-+
-+        if (err)
-+            RETURN_ERROR(MINOR, E_INVALID_STATE, NO_MSG);
-+    }
-+    else
-+    {
-+        t_FmPcdIpcMsg   msg;
-+        uint32_t        replyLength;
-+        t_FmPcdIpcReply reply;
-+
-+        /* in GUEST_PARTITION, we use the IPC, to also set a private driver group if required */
-+        memset(&reply, 0, sizeof(reply));
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&kgAlloc, 0, sizeof(kgAlloc));
-+        kgAlloc.guestId = p_FmPcd->guestId;
-+        kgAlloc.numOfClsPlanEntries = p_ClsPlanGrp->sizeOfGrp;
-+        msg.msgId = FM_PCD_ALLOC_KG_CLSPLAN;
-+        memcpy(msg.msgBody, &kgAlloc, sizeof(kgAlloc));
-+        replyLength = (sizeof(uint32_t) + sizeof(p_ClsPlanGrp->baseEntry));
-+        if ((err = XX_IpcSendMessage(p_FmPcd->h_IpcSession,
-+                                     (uint8_t*)&msg,
-+                                     sizeof(msg.msgId) + sizeof(kgAlloc),
-+                                     (uint8_t*)&reply,
-+                                     &replyLength,
-+                                     NULL,
-+                                     NULL)) != E_OK)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+        if (replyLength != (sizeof(uint32_t) + sizeof(p_ClsPlanGrp->baseEntry)))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+        if ((t_Error)reply.error != E_OK)
-+            RETURN_ERROR(MINOR, (t_Error)reply.error, NO_MSG);
-+
-+        p_ClsPlanGrp->baseEntry = *(uint8_t*)(reply.replyBody);
-+    }
-+
-+    /* build classification plan entries parameters */
-+    p_ClsPlanSet->baseEntry = p_ClsPlanGrp->baseEntry;
-+    p_ClsPlanSet->numOfClsPlanEntries = p_ClsPlanGrp->sizeOfGrp;
-+
-+    oredVectors = 0;
-+    for (i = 0; i<p_Grp->numOfOptions; i++)
-+    {
-+        oredVectors |= p_Grp->optVectors[i];
-+        /* save an array of used options - the indexes represent the power of 2 index */
-+        p_ClsPlanGrp->optArray[i] = p_Grp->options[i];
-+    }
-+    /* set the classification plan relevant entries so that all bits
-+     * relevant to the list of options is cleared
-+     */
-+    for (j = 0; j<p_ClsPlanGrp->sizeOfGrp; j++)
-+        p_ClsPlanSet->vectors[j] = ~oredVectors;
-+
-+    for (i = 0; i<p_Grp->numOfOptions; i++)
-+    {
-+       /* option i got the place 2^i in the clsPlan array. all entries that
-+         * have bit i set, should have the vector bit cleared. So each option
-+         * has one location that it is exclusive (1,2,4,8...) and represent the
-+         * presence of that option only, and other locations that represent a
-+         * combination of options.
-+         * e.g:
-+         * If ethernet-BC is option 1 it gets entry 2 in the table. Entry 2
-+         * now represents a frame with ethernet-BC header - so the bit
-+         * representing ethernet-BC should be set and all other option bits
-+         * should be cleared.
-+         * Entries 2,3,6,7,10... also have ethernet-BC and therefore have bit
-+         * vector[1] set, but they also have other bits set:
-+         * 3=1+2, options 0 and 1
-+         * 6=2+4, options 1 and 2
-+         * 7=1+2+4, options 0,1,and 2
-+         * 10=2+8, options 1 and 3
-+         * etc.
-+         * */
-+
-+        /* now for each option (i), we set their bits in all entries (j)
-+         * that contain bit 2^i.
-+         */
-+        for (j = 0; j<p_ClsPlanGrp->sizeOfGrp; j++)
-+        {
-+            if (j & (1<<i))
-+                p_ClsPlanSet->vectors[j] |= p_Grp->optVectors[i];
-+        }
-+    }
-+
-+    return E_OK;
-+}
-+
-+void FmPcdKgDestroyClsPlanGrp(t_Handle h_FmPcd, uint8_t grpId)
-+{
-+    t_FmPcd                         *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    t_FmPcdIpcKgClsPlanParams       kgAlloc;
-+    t_Error                         err;
-+    t_FmPcdIpcMsg                   msg;
-+    uint32_t                        replyLength;
-+    t_FmPcdIpcReply                 reply;
-+
-+    /* check that no port is bound to this clsPlan */
-+    if (p_FmPcd->p_FmPcdKg->clsPlanGrps[grpId].owners)
-+    {
-+        REPORT_ERROR(MINOR, E_INVALID_STATE, ("Trying to delete a clsPlan grp that has ports bound to"));
-+        return;
-+    }
-+
-+    FmPcdSetClsPlanGrpId(p_FmPcd, p_FmPcd->p_FmPcdKg->clsPlanGrps[grpId].netEnvId, ILLEGAL_CLS_PLAN);
-+
-+    if (grpId == p_FmPcd->p_FmPcdKg->emptyClsPlanGrpId)
-+        p_FmPcd->p_FmPcdKg->emptyClsPlanGrpId = ILLEGAL_CLS_PLAN;
-+    else
-+        FmPcdDecNetEnvOwners(p_FmPcd, p_FmPcd->p_FmPcdKg->clsPlanGrps[grpId].netEnvId);
-+
-+    /* free blocks */
-+    if (p_FmPcd->guestId == NCSW_MASTER_ID)
-+        KgFreeClsPlanEntries(h_FmPcd,
-+                             p_FmPcd->p_FmPcdKg->clsPlanGrps[grpId].sizeOfGrp,
-+                             p_FmPcd->guestId,
-+                             p_FmPcd->p_FmPcdKg->clsPlanGrps[grpId].baseEntry);
-+    else    /* in GUEST_PARTITION, we use the IPC, to also set a private driver group if required */
-+    {
-+        memset(&reply, 0, sizeof(reply));
-+        memset(&msg, 0, sizeof(msg));
-+        kgAlloc.guestId = p_FmPcd->guestId;
-+        kgAlloc.numOfClsPlanEntries = p_FmPcd->p_FmPcdKg->clsPlanGrps[grpId].sizeOfGrp;
-+        kgAlloc.clsPlanBase = p_FmPcd->p_FmPcdKg->clsPlanGrps[grpId].baseEntry;
-+        msg.msgId = FM_PCD_FREE_KG_CLSPLAN;
-+        memcpy(msg.msgBody, &kgAlloc, sizeof(kgAlloc));
-+        replyLength = sizeof(uint32_t);
-+        err = XX_IpcSendMessage(p_FmPcd->h_IpcSession,
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId) + sizeof(kgAlloc),
-+                                (uint8_t*)&reply,
-+                                &replyLength,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+        {
-+            REPORT_ERROR(MINOR, err, NO_MSG);
-+            return;
-+        }
-+        if (replyLength != sizeof(uint32_t))
-+        {
-+            REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+            return;
-+        }
-+        if ((t_Error)reply.error != E_OK)
-+        {
-+            REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Free KG clsPlan failed"));
-+            return;
-+        }
-+    }
-+
-+    /* clear clsPlan driver structure */
-+    memset(&p_FmPcd->p_FmPcdKg->clsPlanGrps[grpId], 0, sizeof(t_FmPcdKgClsPlanGrp));
-+}
-+
-+t_Error FmPcdKgBuildBindPortToSchemes(t_Handle h_FmPcd, t_FmPcdKgInterModuleBindPortToSchemes *p_BindPort, uint32_t *p_SpReg, bool add)
-+{
-+    t_FmPcd                 *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint32_t                j, schemesPerPortVector = 0;
-+    t_FmPcdKgScheme         *p_Scheme;
-+    uint8_t                 i, relativeSchemeId;
-+    uint32_t                tmp, walking1Mask;
-+    uint8_t                 swPortIndex = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdKg, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPcd->p_FmPcdDriverParam, E_INVALID_STATE);
-+
-+    /* for each scheme */
-+    for (i = 0; i<p_BindPort->numOfSchemes; i++)
-+    {
-+        relativeSchemeId = FmPcdKgGetRelativeSchemeId(p_FmPcd, p_BindPort->schemesIds[i]);
-+        if (relativeSchemeId >= FM_PCD_KG_NUM_OF_SCHEMES)
-+            RETURN_ERROR(MAJOR, E_NOT_IN_RANGE, NO_MSG);
-+
-+        if (add)
-+        {
-+            p_Scheme = &p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId];
-+            if (!FmPcdKgIsSchemeValidSw(p_Scheme))
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Requested scheme is invalid."));
-+            /* check netEnvId  of the port against the scheme netEnvId */
-+            if ((p_Scheme->netEnvId != p_BindPort->netEnvId) && (p_Scheme->netEnvId != ILLEGAL_NETENV))
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Port may not be bound to requested scheme - differ in netEnvId"));
-+
-+            /* if next engine is private port policer profile, we need to check that it is valid */
-+            HW_PORT_ID_TO_SW_PORT_INDX(swPortIndex, p_BindPort->hardwarePortId);
-+            if (p_Scheme->nextRelativePlcrProfile)
-+            {
-+                for (j = 0;j<p_Scheme->numOfProfiles;j++)
-+                {
-+                    ASSERT_COND(p_FmPcd->p_FmPcdPlcr->portsMapping[swPortIndex].h_FmPort);
-+                    if (p_Scheme->relativeProfileId+j >= p_FmPcd->p_FmPcdPlcr->portsMapping[swPortIndex].numOfProfiles)
-+                        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Relative profile not in range"));
-+                     if (!FmPcdPlcrIsProfileValid(p_FmPcd, (uint16_t)(p_FmPcd->p_FmPcdPlcr->portsMapping[swPortIndex].profilesBase + p_Scheme->relativeProfileId + j)))
-+                        RETURN_ERROR(MINOR, E_INVALID_STATE, ("Relative profile not valid."));
-+                }
-+            }
-+            if (!p_BindPort->useClsPlan)
-+            {
-+                /* This check may be redundant as port is a assigned to the whole NetEnv */
-+
-+                /* if this port does not use clsPlan, it may not be bound to schemes with units that contain
-+                cls plan options. Schemes that are used only directly, should not be checked.
-+                it also may not be bound to schemes that go to CC with units that are options  - so we OR
-+                the match vector and the grpBits (= ccUnits) */
-+                if ((p_Scheme->matchVector != SCHEME_ALWAYS_DIRECT) || p_Scheme->ccUnits)
-+                {
-+                    uint8_t netEnvId;
-+                    walking1Mask = 0x80000000;
-+                    netEnvId = (p_Scheme->netEnvId == ILLEGAL_NETENV)? p_BindPort->netEnvId:p_Scheme->netEnvId;
-+                    tmp = (p_Scheme->matchVector == SCHEME_ALWAYS_DIRECT)? 0:p_Scheme->matchVector;
-+                    tmp |= p_Scheme->ccUnits;
-+                    while (tmp)
-+                    {
-+                        if (tmp & walking1Mask)
-+                        {
-+                            tmp &= ~walking1Mask;
-+                            if (!PcdNetEnvIsUnitWithoutOpts(p_FmPcd, netEnvId, walking1Mask))
-+                                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Port (without clsPlan) may not be bound to requested scheme - uses clsPlan options"));
-+                        }
-+                        walking1Mask >>= 1;
-+                    }
-+                }
-+            }
-+        }
-+        /* build vector */
-+        schemesPerPortVector |= 1 << (31 - p_BindPort->schemesIds[i]);
-+    }
-+
-+    *p_SpReg = schemesPerPortVector;
-+
-+    return E_OK;
-+}
-+
-+t_Error FmPcdKgBindPortToSchemes(t_Handle h_FmPcd , t_FmPcdKgInterModuleBindPortToSchemes  *p_SchemeBind)
-+{
-+    t_FmPcd                 *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint32_t                spReg;
-+    t_Error                 err = E_OK;
-+
-+    err = FmPcdKgBuildBindPortToSchemes(h_FmPcd, p_SchemeBind, &spReg, TRUE);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    err = KgWriteSp(p_FmPcd, p_SchemeBind->hardwarePortId, spReg, TRUE);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    IncSchemeOwners(p_FmPcd, p_SchemeBind);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmPcdKgUnbindPortToSchemes(t_Handle h_FmPcd, t_FmPcdKgInterModuleBindPortToSchemes *p_SchemeBind)
-+{
-+    t_FmPcd                 *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint32_t                spReg;
-+    t_Error                 err = E_OK;
-+
-+    err = FmPcdKgBuildBindPortToSchemes(p_FmPcd, p_SchemeBind, &spReg, FALSE);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    err = KgWriteSp(p_FmPcd, p_SchemeBind->hardwarePortId, spReg, FALSE);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    DecSchemeOwners(p_FmPcd, p_SchemeBind);
-+
-+    return E_OK;
-+}
-+
-+bool FmPcdKgIsSchemeValidSw(t_Handle h_Scheme)
-+{
-+    t_FmPcdKgScheme     *p_Scheme = (t_FmPcdKgScheme*)h_Scheme;
-+
-+    return p_Scheme->valid;
-+}
-+
-+bool KgIsSchemeAlwaysDirect(t_Handle h_FmPcd, uint8_t schemeId)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    if (p_FmPcd->p_FmPcdKg->schemes[schemeId].matchVector == SCHEME_ALWAYS_DIRECT)
-+        return TRUE;
-+    else
-+        return FALSE;
-+}
-+
-+t_Error  FmPcdKgAllocSchemes(t_Handle h_FmPcd, uint8_t numOfSchemes, uint8_t guestId, uint8_t *p_SchemesIds)
-+{
-+    t_FmPcd             *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    uint8_t             i, j;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdKg, E_INVALID_HANDLE);
-+
-+    /* This routine is issued only on master core of master partition -
-+       either directly or through IPC, so no need for lock */
-+
-+    for (j = 0, i = 0; i < FM_PCD_KG_NUM_OF_SCHEMES && j < numOfSchemes; i++)
-+    {
-+        if (!p_FmPcd->p_FmPcdKg->schemesMng[i].allocated)
-+        {
-+            p_FmPcd->p_FmPcdKg->schemesMng[i].allocated = TRUE;
-+            p_FmPcd->p_FmPcdKg->schemesMng[i].ownerId = guestId;
-+            p_SchemesIds[j] = i;
-+            j++;
-+        }
-+    }
-+
-+    if (j != numOfSchemes)
-+    {
-+        /* roll back */
-+        for (j--; j; j--)
-+        {
-+            p_FmPcd->p_FmPcdKg->schemesMng[p_SchemesIds[j]].allocated = FALSE;
-+            p_FmPcd->p_FmPcdKg->schemesMng[p_SchemesIds[j]].ownerId = 0;
-+            p_SchemesIds[j] = 0;
-+        }
-+
-+        RETURN_ERROR(MAJOR, E_NOT_AVAILABLE, ("No schemes found"));
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Error  FmPcdKgFreeSchemes(t_Handle h_FmPcd, uint8_t numOfSchemes, uint8_t guestId, uint8_t *p_SchemesIds)
-+{
-+    t_FmPcd             *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    uint8_t             i;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdKg, E_INVALID_HANDLE);
-+
-+    /* This routine is issued only on master core of master partition -
-+       either directly or through IPC */
-+
-+    for (i = 0; i < numOfSchemes; i++)
-+    {
-+        if (!p_FmPcd->p_FmPcdKg->schemesMng[p_SchemesIds[i]].allocated)
-+        {
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Scheme was not previously allocated"));
-+        }
-+        if (p_FmPcd->p_FmPcdKg->schemesMng[p_SchemesIds[i]].ownerId != guestId)
-+        {
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Scheme is not owned by caller. "));
-+        }
-+        p_FmPcd->p_FmPcdKg->schemesMng[p_SchemesIds[i]].allocated = FALSE;
-+        p_FmPcd->p_FmPcdKg->schemesMng[p_SchemesIds[i]].ownerId = 0;
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Error  KgAllocClsPlanEntries(t_Handle h_FmPcd, uint16_t numOfClsPlanEntries, uint8_t guestId, uint8_t *p_First)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    uint8_t     numOfBlocks, blocksFound=0, first=0;
-+    uint8_t     i, j;
-+
-+    /* This routine is issued only on master core of master partition -
-+       either directly or through IPC, so no need for lock */
-+
-+    if (!numOfClsPlanEntries)
-+        return E_OK;
-+
-+    if ((numOfClsPlanEntries % CLS_PLAN_NUM_PER_GRP) || (!POWER_OF_2(numOfClsPlanEntries)))
-+         RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("numOfClsPlanEntries must be a power of 2 and divisible by 8"));
-+
-+    numOfBlocks =  (uint8_t)(numOfClsPlanEntries/CLS_PLAN_NUM_PER_GRP);
-+
-+    /* try to find consequent blocks */
-+    first = 0;
-+    for (i = 0; i < FM_PCD_MAX_NUM_OF_CLS_PLANS/CLS_PLAN_NUM_PER_GRP;)
-+    {
-+        if (!p_FmPcd->p_FmPcdKg->clsPlanBlocksMng[i].allocated)
-+        {
-+            blocksFound++;
-+            i++;
-+            if (blocksFound == numOfBlocks)
-+                break;
-+        }
-+        else
-+        {
-+            blocksFound = 0;
-+            /* advance i to the next aligned address */
-+            first = i = (uint8_t)(first + numOfBlocks);
-+        }
-+    }
-+
-+    if (blocksFound == numOfBlocks)
-+    {
-+        *p_First = (uint8_t)(first * CLS_PLAN_NUM_PER_GRP);
-+        for (j = first; j < (first + numOfBlocks); j++)
-+        {
-+            p_FmPcd->p_FmPcdKg->clsPlanBlocksMng[j].allocated = TRUE;
-+            p_FmPcd->p_FmPcdKg->clsPlanBlocksMng[j].ownerId = guestId;
-+        }
-+        return E_OK;
-+    }
-+    else
-+        RETURN_ERROR(MINOR, E_FULL, ("No resources for clsPlan"));
-+}
-+
-+void KgFreeClsPlanEntries(t_Handle h_FmPcd, uint16_t numOfClsPlanEntries, uint8_t guestId, uint8_t base)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint8_t     numOfBlocks;
-+    uint8_t     i, baseBlock;
-+
-+#ifdef DISABLE_ASSERTIONS
-+UNUSED(guestId);
-+#endif /* DISABLE_ASSERTIONS */
-+
-+    /* This routine is issued only on master core of master partition -
-+       either directly or through IPC, so no need for lock */
-+
-+    numOfBlocks =  (uint8_t)(numOfClsPlanEntries/CLS_PLAN_NUM_PER_GRP);
-+    ASSERT_COND(!(base%CLS_PLAN_NUM_PER_GRP));
-+
-+    baseBlock = (uint8_t)(base/CLS_PLAN_NUM_PER_GRP);
-+    for (i=baseBlock;i<baseBlock+numOfBlocks;i++)
-+    {
-+        ASSERT_COND(p_FmPcd->p_FmPcdKg->clsPlanBlocksMng[i].allocated);
-+        ASSERT_COND(guestId == p_FmPcd->p_FmPcdKg->clsPlanBlocksMng[i].ownerId);
-+        p_FmPcd->p_FmPcdKg->clsPlanBlocksMng[i].allocated = FALSE;
-+        p_FmPcd->p_FmPcdKg->clsPlanBlocksMng[i].ownerId = 0;
-+    }
-+}
-+
-+void KgEnable(t_FmPcd *p_FmPcd)
-+{
-+    struct fman_kg_regs *p_Regs = p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs;
-+
-+    ASSERT_COND(FmIsMaster(p_FmPcd->h_Fm));
-+    fman_kg_enable(p_Regs);
-+}
-+
-+void KgDisable(t_FmPcd *p_FmPcd)
-+{
-+    struct fman_kg_regs *p_Regs = p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs;
-+
-+    ASSERT_COND(FmIsMaster(p_FmPcd->h_Fm));
-+    fman_kg_disable(p_Regs);
-+}
-+
-+void KgSetClsPlan(t_Handle h_FmPcd, t_FmPcdKgInterModuleClsPlanSet *p_Set)
-+{
-+    t_FmPcd                 *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    struct fman_kg_cp_regs  *p_FmPcdKgPortRegs;
-+    uint32_t                tmpKgarReg = 0, intFlags;
-+    uint16_t                i, j;
-+
-+    /* This routine is protected by the calling routine ! */
-+    ASSERT_COND(FmIsMaster(p_FmPcd->h_Fm));
-+    p_FmPcdKgPortRegs = &p_FmPcd->p_FmPcdKg->p_IndirectAccessRegs->clsPlanRegs;
-+
-+    intFlags = KgHwLock(p_FmPcd->p_FmPcdKg);
-+    for (i=p_Set->baseEntry;i<p_Set->baseEntry+p_Set->numOfClsPlanEntries;i+=8)
-+    {
-+        tmpKgarReg = FmPcdKgBuildWriteClsPlanBlockActionReg((uint8_t)(i / CLS_PLAN_NUM_PER_GRP));
-+
-+        for (j = i; j < i+8; j++)
-+        {
-+            ASSERT_COND(IN_RANGE(0, (j - p_Set->baseEntry), FM_PCD_MAX_NUM_OF_CLS_PLANS-1));
-+            WRITE_UINT32(p_FmPcdKgPortRegs->kgcpe[j % CLS_PLAN_NUM_PER_GRP],p_Set->vectors[j - p_Set->baseEntry]);
-+        }
-+
-+        if (WriteKgarWait(p_FmPcd, tmpKgarReg) != E_OK)
-+        {
-+            REPORT_ERROR(MAJOR, E_INVALID_STATE, ("WriteKgarWait FAILED"));
-+            KgHwUnlock(p_FmPcd->p_FmPcdKg, intFlags);
-+            return;
-+        }
-+    }
-+    KgHwUnlock(p_FmPcd->p_FmPcdKg, intFlags);
-+}
-+
-+t_Handle KgConfig( t_FmPcd *p_FmPcd, t_FmPcdParams *p_FmPcdParams)
-+{
-+    t_FmPcdKg   *p_FmPcdKg;
-+
-+    UNUSED(p_FmPcd);
-+
-+    if (p_FmPcdParams->numOfSchemes > FM_PCD_KG_NUM_OF_SCHEMES)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("numOfSchemes should not exceed %d", FM_PCD_KG_NUM_OF_SCHEMES));
-+        return NULL;
-+    }
-+
-+    p_FmPcdKg = (t_FmPcdKg *)XX_Malloc(sizeof(t_FmPcdKg));
-+    if (!p_FmPcdKg)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM Keygen allocation FAILED"));
-+        return NULL;
-+    }
-+    memset(p_FmPcdKg, 0, sizeof(t_FmPcdKg));
-+
-+
-+    if (FmIsMaster(p_FmPcd->h_Fm))
-+    {
-+        p_FmPcdKg->p_FmPcdKgRegs  = (struct fman_kg_regs *)UINT_TO_PTR(FmGetPcdKgBaseAddr(p_FmPcdParams->h_Fm));
-+        p_FmPcd->exceptions |= DEFAULT_fmPcdKgErrorExceptions;
-+        p_FmPcdKg->p_IndirectAccessRegs = (u_FmPcdKgIndirectAccessRegs *)&p_FmPcdKg->p_FmPcdKgRegs->fmkg_indirect[0];
-+    }
-+
-+    p_FmPcdKg->numOfSchemes = p_FmPcdParams->numOfSchemes;
-+    if ((p_FmPcd->guestId == NCSW_MASTER_ID) && !p_FmPcdKg->numOfSchemes)
-+    {
-+        p_FmPcdKg->numOfSchemes = FM_PCD_KG_NUM_OF_SCHEMES;
-+        DBG(WARNING, ("numOfSchemes was defined 0 by user, re-defined by driver to FM_PCD_KG_NUM_OF_SCHEMES"));
-+    }
-+
-+    p_FmPcdKg->emptyClsPlanGrpId = ILLEGAL_CLS_PLAN;
-+
-+    return p_FmPcdKg;
-+}
-+
-+t_Error KgInit(t_FmPcd *p_FmPcd)
-+{
-+    t_Error err = E_OK;
-+
-+    p_FmPcd->p_FmPcdKg->h_HwSpinlock = XX_InitSpinlock();
-+    if (!p_FmPcd->p_FmPcdKg->h_HwSpinlock)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("FM KG HW spinlock"));
-+
-+    if (p_FmPcd->guestId == NCSW_MASTER_ID)
-+        err =  KgInitMaster(p_FmPcd);
-+    else
-+        err =  KgInitGuest(p_FmPcd);
-+
-+    if (err != E_OK)
-+    {
-+        if (p_FmPcd->p_FmPcdKg->h_HwSpinlock)
-+            XX_FreeSpinlock(p_FmPcd->p_FmPcdKg->h_HwSpinlock);
-+    }
-+
-+    return err;
-+}
-+
-+t_Error KgFree(t_FmPcd *p_FmPcd)
-+{
-+    t_FmPcdIpcKgSchemesParams       kgAlloc;
-+    t_Error                         err = E_OK;
-+    t_FmPcdIpcMsg                   msg;
-+    uint32_t                        replyLength;
-+    t_FmPcdIpcReply                 reply;
-+
-+    FmUnregisterIntr(p_FmPcd->h_Fm, e_FM_MOD_KG, 0, e_FM_INTR_TYPE_ERR);
-+
-+    if (p_FmPcd->guestId == NCSW_MASTER_ID)
-+    {
-+        err = FmPcdKgFreeSchemes(p_FmPcd,
-+                                    p_FmPcd->p_FmPcdKg->numOfSchemes,
-+                                    p_FmPcd->guestId,
-+                                    p_FmPcd->p_FmPcdKg->schemesIds);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+        if (p_FmPcd->p_FmPcdKg->h_HwSpinlock)
-+            XX_FreeSpinlock(p_FmPcd->p_FmPcdKg->h_HwSpinlock);
-+
-+        return E_OK;
-+    }
-+
-+    /* guest */
-+    memset(&reply, 0, sizeof(reply));
-+    memset(&msg, 0, sizeof(msg));
-+    kgAlloc.numOfSchemes = p_FmPcd->p_FmPcdKg->numOfSchemes;
-+    kgAlloc.guestId = p_FmPcd->guestId;
-+    ASSERT_COND(kgAlloc.numOfSchemes < FM_PCD_KG_NUM_OF_SCHEMES);
-+    memcpy(kgAlloc.schemesIds, p_FmPcd->p_FmPcdKg->schemesIds, (sizeof(uint8_t))*kgAlloc.numOfSchemes);
-+    msg.msgId = FM_PCD_FREE_KG_SCHEMES;
-+    memcpy(msg.msgBody, &kgAlloc, sizeof(kgAlloc));
-+    replyLength = sizeof(uint32_t);
-+    if ((err = XX_IpcSendMessage(p_FmPcd->h_IpcSession,
-+                                 (uint8_t*)&msg,
-+                                 sizeof(msg.msgId) + sizeof(kgAlloc),
-+                                 (uint8_t*)&reply,
-+                                 &replyLength,
-+                                 NULL,
-+                                 NULL)) != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    if (replyLength != sizeof(uint32_t))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+
-+    if (p_FmPcd->p_FmPcdKg->h_HwSpinlock)
-+        XX_FreeSpinlock(p_FmPcd->p_FmPcdKg->h_HwSpinlock);
-+
-+    return (t_Error)reply.error;
-+}
-+
-+t_Error FmPcdKgSetOrBindToClsPlanGrp(t_Handle h_FmPcd, uint8_t hardwarePortId, uint8_t netEnvId, protocolOpt_t *p_OptArray, uint8_t *p_ClsPlanGrpId, bool *p_IsEmptyClsPlanGrp)
-+{
-+    t_FmPcd                                 *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    t_FmPcdKgInterModuleClsPlanGrpParams    grpParams, *p_GrpParams;
-+    t_FmPcdKgClsPlanGrp                     *p_ClsPlanGrp;
-+    t_FmPcdKgInterModuleClsPlanSet          *p_ClsPlanSet;
-+    t_Error                                 err;
-+
-+    /* This function is issued only from FM_PORT_SetPcd which locked all PCD modules,
-+       so no need for lock here */
-+
-+    memset(&grpParams, 0, sizeof(grpParams));
-+    grpParams.clsPlanGrpId = ILLEGAL_CLS_PLAN;
-+    p_GrpParams = &grpParams;
-+
-+    p_GrpParams->netEnvId = netEnvId;
-+
-+    /* Get from the NetEnv the information of the clsPlan (can be already created,
-+     * or needs to build) */
-+    err = PcdGetClsPlanGrpParams(h_FmPcd, p_GrpParams);
-+    if (err)
-+        RETURN_ERROR(MINOR,err,NO_MSG);
-+
-+    if (p_GrpParams->grpExists)
-+    {
-+        /* this group was already updated (at least) in SW */
-+        *p_ClsPlanGrpId = p_GrpParams->clsPlanGrpId;
-+    }
-+    else
-+    {
-+        p_ClsPlanSet = (t_FmPcdKgInterModuleClsPlanSet *)XX_Malloc(sizeof(t_FmPcdKgInterModuleClsPlanSet));
-+        if (!p_ClsPlanSet)
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Classification plan set"));
-+        memset(p_ClsPlanSet, 0, sizeof(t_FmPcdKgInterModuleClsPlanSet));
-+        /* Build (in SW) the clsPlan parameters, including the vectors to be written to HW */
-+        err = FmPcdKgBuildClsPlanGrp(h_FmPcd, p_GrpParams, p_ClsPlanSet);
-+        if (err)
-+        {
-+            XX_Free(p_ClsPlanSet);
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        }
-+        *p_ClsPlanGrpId = p_GrpParams->clsPlanGrpId;
-+
-+        if (p_FmPcd->h_Hc)
-+        {
-+            /* write clsPlan entries to memory */
-+            err = FmHcPcdKgSetClsPlan(p_FmPcd->h_Hc, p_ClsPlanSet);
-+            if (err)
-+            {
-+                XX_Free(p_ClsPlanSet);
-+                RETURN_ERROR(MAJOR, err, NO_MSG);
-+            }
-+        }
-+        else
-+            /* write clsPlan entries to memory */
-+            KgSetClsPlan(p_FmPcd, p_ClsPlanSet);
-+
-+        XX_Free(p_ClsPlanSet);
-+    }
-+
-+    /* Set caller parameters     */
-+
-+    /* mark if this is an empty classification group */
-+    if (*p_ClsPlanGrpId == p_FmPcd->p_FmPcdKg->emptyClsPlanGrpId)
-+        *p_IsEmptyClsPlanGrp = TRUE;
-+    else
-+        *p_IsEmptyClsPlanGrp = FALSE;
-+
-+    p_ClsPlanGrp = &p_FmPcd->p_FmPcdKg->clsPlanGrps[*p_ClsPlanGrpId];
-+
-+   /* increment owners number */
-+    p_ClsPlanGrp->owners++;
-+
-+    /* copy options array for port */
-+    memcpy(p_OptArray, &p_FmPcd->p_FmPcdKg->clsPlanGrps[*p_ClsPlanGrpId].optArray, FM_PCD_MAX_NUM_OF_OPTIONS(FM_PCD_MAX_NUM_OF_CLS_PLANS)*sizeof(protocolOpt_t));
-+
-+    /* bind port to the new or existing group */
-+    err = BindPortToClsPlanGrp(p_FmPcd, hardwarePortId, p_GrpParams->clsPlanGrpId);
-+    if (err)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmPcdKgDeleteOrUnbindPortToClsPlanGrp(t_Handle h_FmPcd, uint8_t hardwarePortId, uint8_t clsPlanGrpId)
-+{
-+    t_FmPcd                         *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    t_FmPcdKgClsPlanGrp             *p_ClsPlanGrp = &p_FmPcd->p_FmPcdKg->clsPlanGrps[clsPlanGrpId];
-+    t_FmPcdKgInterModuleClsPlanSet  *p_ClsPlanSet;
-+    t_Error                         err;
-+
-+    /* This function is issued only from FM_PORT_DeletePcd which locked all PCD modules,
-+       so no need for lock here */
-+
-+    UnbindPortToClsPlanGrp(p_FmPcd, hardwarePortId);
-+
-+    /* decrement owners number */
-+    ASSERT_COND(p_ClsPlanGrp->owners);
-+    p_ClsPlanGrp->owners--;
-+
-+    if (!p_ClsPlanGrp->owners)
-+    {
-+        if (p_FmPcd->h_Hc)
-+        {
-+            err = FmHcPcdKgDeleteClsPlan(p_FmPcd->h_Hc, clsPlanGrpId);
-+            return err;
-+        }
-+        else
-+        {
-+            /* clear clsPlan entries in memory */
-+            p_ClsPlanSet = (t_FmPcdKgInterModuleClsPlanSet *)XX_Malloc(sizeof(t_FmPcdKgInterModuleClsPlanSet));
-+            if (!p_ClsPlanSet)
-+            {
-+                RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Classification plan set"));
-+            }
-+            memset(p_ClsPlanSet, 0, sizeof(t_FmPcdKgInterModuleClsPlanSet));
-+
-+            p_ClsPlanSet->baseEntry = p_FmPcd->p_FmPcdKg->clsPlanGrps[clsPlanGrpId].baseEntry;
-+            p_ClsPlanSet->numOfClsPlanEntries = p_FmPcd->p_FmPcdKg->clsPlanGrps[clsPlanGrpId].sizeOfGrp;
-+            KgSetClsPlan(p_FmPcd, p_ClsPlanSet);
-+            XX_Free(p_ClsPlanSet);
-+
-+            FmPcdKgDestroyClsPlanGrp(h_FmPcd, clsPlanGrpId);
-+       }
-+    }
-+    return E_OK;
-+}
-+
-+uint32_t FmPcdKgGetRequiredAction(t_Handle h_FmPcd, uint8_t schemeId)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    ASSERT_COND(p_FmPcd->p_FmPcdKg->schemes[schemeId].valid);
-+
-+    return p_FmPcd->p_FmPcdKg->schemes[schemeId].requiredAction;
-+}
-+
-+uint32_t FmPcdKgGetRequiredActionFlag(t_Handle h_FmPcd, uint8_t schemeId)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+   ASSERT_COND(p_FmPcd->p_FmPcdKg->schemes[schemeId].valid);
-+
-+    return p_FmPcd->p_FmPcdKg->schemes[schemeId].requiredActionFlag;
-+}
-+
-+bool FmPcdKgIsDirectPlcr(t_Handle h_FmPcd, uint8_t schemeId)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+   ASSERT_COND(p_FmPcd->p_FmPcdKg->schemes[schemeId].valid);
-+
-+    return p_FmPcd->p_FmPcdKg->schemes[schemeId].directPlcr;
-+}
-+
-+
-+uint16_t FmPcdKgGetRelativeProfileId(t_Handle h_FmPcd, uint8_t schemeId)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+   ASSERT_COND(p_FmPcd->p_FmPcdKg->schemes[schemeId].valid);
-+
-+    return p_FmPcd->p_FmPcdKg->schemes[schemeId].relativeProfileId;
-+}
-+
-+bool FmPcdKgIsDistrOnPlcrProfile(t_Handle h_FmPcd, uint8_t schemeId)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+   ASSERT_COND(p_FmPcd->p_FmPcdKg->schemes[schemeId].valid);
-+
-+    if ((p_FmPcd->p_FmPcdKg->schemes[schemeId].extractedOrs &&
-+        p_FmPcd->p_FmPcdKg->schemes[schemeId].bitOffsetInPlcrProfile) ||
-+        p_FmPcd->p_FmPcdKg->schemes[schemeId].nextRelativePlcrProfile)
-+        return TRUE;
-+    else
-+        return FALSE;
-+
-+}
-+
-+e_FmPcdEngine FmPcdKgGetNextEngine(t_Handle h_FmPcd, uint8_t relativeSchemeId)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    ASSERT_COND(p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId].valid);
-+
-+    return p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId].nextEngine;
-+}
-+
-+e_FmPcdDoneAction FmPcdKgGetDoneAction(t_Handle h_FmPcd, uint8_t schemeId)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    ASSERT_COND(p_FmPcd->p_FmPcdKg->schemes[schemeId].valid);
-+
-+    return p_FmPcd->p_FmPcdKg->schemes[schemeId].doneAction;
-+}
-+
-+void FmPcdKgUpdateRequiredAction(t_Handle h_Scheme, uint32_t requiredAction)
-+{
-+    t_FmPcdKgScheme *p_Scheme = (t_FmPcdKgScheme *)h_Scheme;
-+
-+    /* this routine is protected by calling routine */
-+
-+    ASSERT_COND(p_Scheme->valid);
-+
-+    p_Scheme->requiredAction |= requiredAction;
-+}
-+
-+bool FmPcdKgHwSchemeIsValid(uint32_t schemeModeReg)
-+{
-+    return (bool)!!(schemeModeReg & KG_SCH_MODE_EN);
-+}
-+
-+uint32_t FmPcdKgBuildWriteSchemeActionReg(uint8_t schemeId, bool updateCounter)
-+{
-+    return (uint32_t)(((uint32_t)schemeId << FM_PCD_KG_KGAR_NUM_SHIFT) |
-+                      FM_KG_KGAR_GO |
-+                      FM_KG_KGAR_WRITE |
-+                      FM_KG_KGAR_SEL_SCHEME_ENTRY |
-+                      DUMMY_PORT_ID |
-+                      (updateCounter ? FM_KG_KGAR_SCM_WSEL_UPDATE_CNT:0));
-+}
-+
-+uint32_t FmPcdKgBuildReadSchemeActionReg(uint8_t schemeId)
-+{
-+    return (uint32_t)(((uint32_t)schemeId << FM_PCD_KG_KGAR_NUM_SHIFT) |
-+                      FM_KG_KGAR_GO |
-+                      FM_KG_KGAR_READ |
-+                      FM_KG_KGAR_SEL_SCHEME_ENTRY |
-+                      DUMMY_PORT_ID |
-+                      FM_KG_KGAR_SCM_WSEL_UPDATE_CNT);
-+
-+}
-+
-+uint32_t FmPcdKgBuildWriteClsPlanBlockActionReg(uint8_t grpId)
-+{
-+    return (uint32_t)(FM_KG_KGAR_GO |
-+                      FM_KG_KGAR_WRITE |
-+                      FM_PCD_KG_KGAR_SEL_CLS_PLAN_ENTRY |
-+                      DUMMY_PORT_ID |
-+                      ((uint32_t)grpId << FM_PCD_KG_KGAR_NUM_SHIFT) |
-+                      FM_PCD_KG_KGAR_WSEL_MASK);
-+
-+    /* if we ever want to write 1 by 1, use:
-+       sel = (uint8_t)(0x01 << (7- (entryId % CLS_PLAN_NUM_PER_GRP)));
-+     */
-+}
-+
-+uint32_t FmPcdKgBuildWritePortSchemeBindActionReg(uint8_t hardwarePortId)
-+{
-+
-+    return (uint32_t)(FM_KG_KGAR_GO |
-+                      FM_KG_KGAR_WRITE |
-+                      FM_PCD_KG_KGAR_SEL_PORT_ENTRY |
-+                      hardwarePortId |
-+                      FM_PCD_KG_KGAR_SEL_PORT_WSEL_SP);
-+}
-+
-+uint32_t FmPcdKgBuildReadPortSchemeBindActionReg(uint8_t hardwarePortId)
-+{
-+
-+    return (uint32_t)(FM_KG_KGAR_GO |
-+                      FM_KG_KGAR_READ |
-+                      FM_PCD_KG_KGAR_SEL_PORT_ENTRY |
-+                      hardwarePortId |
-+                      FM_PCD_KG_KGAR_SEL_PORT_WSEL_SP);
-+}
-+
-+uint32_t FmPcdKgBuildWritePortClsPlanBindActionReg(uint8_t hardwarePortId)
-+{
-+
-+    return (uint32_t)(FM_KG_KGAR_GO |
-+                      FM_KG_KGAR_WRITE |
-+                      FM_PCD_KG_KGAR_SEL_PORT_ENTRY |
-+                      hardwarePortId |
-+                      FM_PCD_KG_KGAR_SEL_PORT_WSEL_CPP);
-+}
-+
-+uint8_t FmPcdKgGetClsPlanGrpBase(t_Handle h_FmPcd, uint8_t clsPlanGrp)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    return p_FmPcd->p_FmPcdKg->clsPlanGrps[clsPlanGrp].baseEntry;
-+}
-+
-+uint16_t FmPcdKgGetClsPlanGrpSize(t_Handle h_FmPcd, uint8_t clsPlanGrp)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    return p_FmPcd->p_FmPcdKg->clsPlanGrps[clsPlanGrp].sizeOfGrp;
-+}
-+
-+
-+uint8_t FmPcdKgGetSchemeId(t_Handle h_Scheme)
-+{
-+    return ((t_FmPcdKgScheme*)h_Scheme)->schemeId;
-+
-+}
-+
-+#if (DPAA_VERSION >= 11)
-+bool FmPcdKgGetVspe(t_Handle h_Scheme)
-+{
-+    return ((t_FmPcdKgScheme*)h_Scheme)->vspe;
-+
-+}
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+uint8_t FmPcdKgGetRelativeSchemeId(t_Handle h_FmPcd, uint8_t schemeId)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint8_t     i;
-+
-+    for (i = 0;i<p_FmPcd->p_FmPcdKg->numOfSchemes;i++)
-+        if (p_FmPcd->p_FmPcdKg->schemesIds[i] == schemeId)
-+            return i;
-+
-+    if (i == p_FmPcd->p_FmPcdKg->numOfSchemes)
-+        REPORT_ERROR(MAJOR, E_NOT_IN_RANGE, ("Scheme is out of partition range"));
-+
-+    return FM_PCD_KG_NUM_OF_SCHEMES;
-+}
-+
-+t_Handle FmPcdKgGetSchemeHandle(t_Handle h_FmPcd, uint8_t relativeSchemeId)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    ASSERT_COND(p_FmPcd);
-+
-+    /* check that schemeId is in range */
-+    if (relativeSchemeId >= p_FmPcd->p_FmPcdKg->numOfSchemes)
-+    {
-+        REPORT_ERROR(MAJOR, E_NOT_IN_RANGE, ("relative-scheme-id %d!", relativeSchemeId));
-+        return NULL;
-+    }
-+
-+    if (!FmPcdKgIsSchemeValidSw(&p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId]))
-+        return NULL;
-+
-+    return &p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId];
-+}
-+
-+bool FmPcdKgIsSchemeHasOwners(t_Handle h_Scheme)
-+{
-+    return (((t_FmPcdKgScheme*)h_Scheme)->owners == 0)?FALSE:TRUE;
-+}
-+
-+t_Error FmPcdKgCcGetSetParams(t_Handle h_FmPcd, t_Handle h_Scheme, uint32_t requiredAction, uint32_t value)
-+{
-+    t_FmPcd             *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint8_t             relativeSchemeId, physicalSchemeId;
-+    uint32_t            tmpKgarReg, tmpReg32 = 0, intFlags;
-+    t_Error             err;
-+    t_FmPcdKgScheme     *p_Scheme = (t_FmPcdKgScheme*)h_Scheme;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmPcd, E_INVALID_HANDLE, 0);
-+    SANITY_CHECK_RETURN_VALUE(p_FmPcd->p_FmPcdKg, E_INVALID_HANDLE, 0);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmPcd->p_FmPcdDriverParam, E_INVALID_STATE, 0);
-+
-+    /* Calling function locked all PCD modules, so no need to lock here */
-+
-+    if (!FmPcdKgIsSchemeValidSw(h_Scheme))
-+        RETURN_ERROR(MAJOR, E_ALREADY_EXISTS, ("Scheme is Invalid"));
-+
-+    if (p_FmPcd->h_Hc)
-+    {
-+        err = FmHcPcdKgCcGetSetParams(p_FmPcd->h_Hc, h_Scheme, requiredAction, value);
-+
-+        UpdateRequiredActionFlag(h_Scheme,TRUE);
-+        FmPcdKgUpdateRequiredAction(h_Scheme,requiredAction);
-+        return err;
-+    }
-+
-+    physicalSchemeId = p_Scheme->schemeId;
-+
-+    relativeSchemeId = FmPcdKgGetRelativeSchemeId(p_FmPcd, physicalSchemeId);
-+    if (relativeSchemeId >= FM_PCD_KG_NUM_OF_SCHEMES)
-+        RETURN_ERROR(MAJOR, E_NOT_IN_RANGE, NO_MSG);
-+
-+    if (!p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId].requiredActionFlag ||
-+        !(p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId].requiredAction & requiredAction))
-+    {
-+        if (requiredAction & UPDATE_NIA_ENQ_WITHOUT_DMA)
-+        {
-+            switch (p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId].nextEngine)
-+            {
-+                case (e_FM_PCD_DONE):
-+                    if (p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId].doneAction == e_FM_PCD_ENQ_FRAME)
-+                    {
-+                        tmpKgarReg = FmPcdKgBuildReadSchemeActionReg(physicalSchemeId);
-+                        intFlags = KgHwLock(p_FmPcd->p_FmPcdKg);
-+                        WriteKgarWait(p_FmPcd, tmpKgarReg);
-+                        tmpReg32 = GET_UINT32(p_FmPcd->p_FmPcdKg->p_IndirectAccessRegs->schemeRegs.kgse_mode);
-+                        ASSERT_COND(tmpReg32 & (NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME));
-+                        WRITE_UINT32(p_FmPcd->p_FmPcdKg->p_IndirectAccessRegs->schemeRegs.kgse_mode, tmpReg32 | NIA_BMI_AC_ENQ_FRAME_WITHOUT_DMA);
-+                        /* call indirect command for scheme write */
-+                        tmpKgarReg = FmPcdKgBuildWriteSchemeActionReg(physicalSchemeId, FALSE);
-+                        WriteKgarWait(p_FmPcd, tmpKgarReg);
-+                        KgHwUnlock(p_FmPcd->p_FmPcdKg, intFlags);
-+                    }
-+                break;
-+                case (e_FM_PCD_PLCR):
-+                    if (!p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId].directPlcr ||
-+                       (p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId].extractedOrs &&
-+                        p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId].bitOffsetInPlcrProfile) ||
-+                        p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId].nextRelativePlcrProfile)
-+                        {
-+                            RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("In this situation PP can not be with distribution and has to be shared"));
-+                        }
-+                        err = FmPcdPlcrCcGetSetParams(h_FmPcd, p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId].relativeProfileId, requiredAction);
-+                        if (err)
-+                        {
-+                            RETURN_ERROR(MAJOR, err, NO_MSG);
-+                        }
-+               break;
-+               default:
-+                    RETURN_ERROR(MAJOR, E_INVALID_VALUE,("in this situation the next engine after scheme can be or PLCR or ENQ_FRAME"));
-+            }
-+        }
-+        if (requiredAction & UPDATE_KG_NIA_CC_WA)
-+        {
-+            if (p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId].nextEngine == e_FM_PCD_CC)
-+            {
-+                tmpKgarReg = FmPcdKgBuildReadSchemeActionReg(physicalSchemeId);
-+                intFlags = KgHwLock(p_FmPcd->p_FmPcdKg);
-+                WriteKgarWait(p_FmPcd, tmpKgarReg);
-+                tmpReg32 = GET_UINT32(p_FmPcd->p_FmPcdKg->p_IndirectAccessRegs->schemeRegs.kgse_mode);
-+                ASSERT_COND(tmpReg32 & (NIA_ENG_FM_CTL | NIA_FM_CTL_AC_CC));
-+                tmpReg32 &= ~NIA_FM_CTL_AC_CC;
-+                WRITE_UINT32(p_FmPcd->p_FmPcdKg->p_IndirectAccessRegs->schemeRegs.kgse_mode, tmpReg32 | NIA_FM_CTL_AC_PRE_CC);
-+                /* call indirect command for scheme write */
-+                tmpKgarReg = FmPcdKgBuildWriteSchemeActionReg(physicalSchemeId, FALSE);
-+                WriteKgarWait(p_FmPcd, tmpKgarReg);
-+                KgHwUnlock(p_FmPcd->p_FmPcdKg, intFlags);
-+           }
-+        }
-+        if (requiredAction & UPDATE_KG_OPT_MODE)
-+        {
-+            tmpKgarReg = FmPcdKgBuildReadSchemeActionReg(physicalSchemeId);
-+            intFlags = KgHwLock(p_FmPcd->p_FmPcdKg);
-+            WriteKgarWait(p_FmPcd, tmpKgarReg);
-+            WRITE_UINT32(p_FmPcd->p_FmPcdKg->p_IndirectAccessRegs->schemeRegs.kgse_om, value);
-+            /* call indirect command for scheme write */
-+            tmpKgarReg = FmPcdKgBuildWriteSchemeActionReg(physicalSchemeId, FALSE);
-+            WriteKgarWait(p_FmPcd, tmpKgarReg);
-+            KgHwUnlock(p_FmPcd->p_FmPcdKg, intFlags);
-+        }
-+        if (requiredAction & UPDATE_KG_NIA)
-+        {
-+            tmpKgarReg = FmPcdKgBuildReadSchemeActionReg(physicalSchemeId);
-+            intFlags = KgHwLock(p_FmPcd->p_FmPcdKg);
-+            WriteKgarWait(p_FmPcd, tmpKgarReg);
-+            tmpReg32 = GET_UINT32(p_FmPcd->p_FmPcdKg->p_IndirectAccessRegs->schemeRegs.kgse_mode);
-+            tmpReg32 &= ~(NIA_ENG_MASK | NIA_AC_MASK);
-+            tmpReg32 |= value;
-+            WRITE_UINT32(p_FmPcd->p_FmPcdKg->p_IndirectAccessRegs->schemeRegs.kgse_mode, tmpReg32);
-+            /* call indirect command for scheme write */
-+            tmpKgarReg = FmPcdKgBuildWriteSchemeActionReg(physicalSchemeId, FALSE);
-+            WriteKgarWait(p_FmPcd, tmpKgarReg);
-+            KgHwUnlock(p_FmPcd->p_FmPcdKg, intFlags);
-+        }
-+    }
-+
-+    UpdateRequiredActionFlag(h_Scheme, TRUE);
-+    FmPcdKgUpdateRequiredAction(h_Scheme, requiredAction);
-+
-+    return E_OK;
-+}
-+/*********************** End of inter-module routines ************************/
-+
-+
-+/****************************************/
-+/*  API routines                        */
-+/****************************************/
-+
-+t_Handle FM_PCD_KgSchemeSet(t_Handle h_FmPcd,  t_FmPcdKgSchemeParams *p_SchemeParams)
-+{
-+    t_FmPcd                             *p_FmPcd;
-+    struct fman_kg_scheme_regs          schemeRegs;
-+    struct fman_kg_scheme_regs          *p_MemRegs;
-+    uint8_t                             i;
-+    t_Error                             err = E_OK;
-+    uint32_t                            tmpKgarReg;
-+    uint32_t                            intFlags;
-+    uint8_t                             physicalSchemeId, relativeSchemeId = 0;
-+    t_FmPcdKgScheme                     *p_Scheme;
-+
-+    if (p_SchemeParams->modify)
-+    {
-+        p_Scheme = (t_FmPcdKgScheme *)p_SchemeParams->id.h_Scheme;
-+        p_FmPcd = p_Scheme->h_FmPcd;
-+
-+        SANITY_CHECK_RETURN_VALUE(p_FmPcd, E_INVALID_HANDLE, NULL);
-+        SANITY_CHECK_RETURN_VALUE(p_FmPcd->p_FmPcdKg, E_INVALID_HANDLE, NULL);
-+
-+        if (!FmPcdKgIsSchemeValidSw(p_Scheme))
-+        {
-+            REPORT_ERROR(MAJOR, E_ALREADY_EXISTS,
-+                         ("Scheme is invalid"));
-+            return NULL;
-+        }
-+
-+        if (!KgSchemeFlagTryLock(p_Scheme))
-+        {
-+            DBG(TRACE, ("Scheme Try Lock - BUSY"));
-+            /* Signal to caller BUSY condition */
-+            p_SchemeParams->id.h_Scheme = NULL;
-+            return NULL;
-+        }
-+    }
-+    else
-+    {
-+        p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+        SANITY_CHECK_RETURN_VALUE(p_FmPcd, E_INVALID_HANDLE, NULL);
-+        SANITY_CHECK_RETURN_VALUE(p_FmPcd->p_FmPcdKg, E_INVALID_HANDLE, NULL);
-+
-+        relativeSchemeId = p_SchemeParams->id.relativeSchemeId;
-+        /* check that schemeId is in range */
-+        if (relativeSchemeId >= p_FmPcd->p_FmPcdKg->numOfSchemes)
-+        {
-+            REPORT_ERROR(MAJOR, E_NOT_IN_RANGE, ("relative-scheme-id %d!", relativeSchemeId));
-+            return NULL;
-+        }
-+
-+        p_Scheme = &p_FmPcd->p_FmPcdKg->schemes[relativeSchemeId];
-+        if (FmPcdKgIsSchemeValidSw(p_Scheme))
-+        {
-+            REPORT_ERROR(MAJOR, E_ALREADY_EXISTS,
-+                         ("Scheme id (%d)!", relativeSchemeId));
-+            return NULL;
-+        }
-+        /* Clear all fields, scheme may have beed previously used */
-+        memset(p_Scheme, 0, sizeof(t_FmPcdKgScheme));
-+
-+        p_Scheme->schemeId = p_FmPcd->p_FmPcdKg->schemesIds[relativeSchemeId];
-+        p_Scheme->h_FmPcd = p_FmPcd;
-+
-+        p_Scheme->p_Lock = FmPcdAcquireLock(p_FmPcd);
-+        if (!p_Scheme->p_Lock)
-+            REPORT_ERROR(MAJOR, E_NOT_AVAILABLE, ("FM KG Scheme lock obj!"));
-+    }
-+
-+    err = BuildSchemeRegs((t_Handle)p_Scheme, p_SchemeParams, &schemeRegs);
-+    if (err)
-+    {
-+        REPORT_ERROR(MAJOR, err, NO_MSG);
-+        if (p_SchemeParams->modify)
-+            KgSchemeFlagUnlock(p_Scheme);
-+        if (!p_SchemeParams->modify &&
-+            p_Scheme->p_Lock)
-+            FmPcdReleaseLock(p_FmPcd, p_Scheme->p_Lock);
-+        return NULL;
-+    }
-+
-+    if (p_FmPcd->h_Hc)
-+    {
-+        err = FmHcPcdKgSetScheme(p_FmPcd->h_Hc,
-+                                 (t_Handle)p_Scheme,
-+                                 &schemeRegs,
-+                                 p_SchemeParams->schemeCounter.update);
-+        if (p_SchemeParams->modify)
-+            KgSchemeFlagUnlock(p_Scheme);
-+        if (err)
-+        {
-+            if (!p_SchemeParams->modify &&
-+                p_Scheme->p_Lock)
-+                FmPcdReleaseLock(p_FmPcd, p_Scheme->p_Lock);
-+            return NULL;
-+        }
-+        if (!p_SchemeParams->modify)
-+            ValidateSchemeSw(p_Scheme);
-+        return (t_Handle)p_Scheme;
-+    }
-+
-+    physicalSchemeId = p_Scheme->schemeId;
-+
-+    /* configure all 21 scheme registers */
-+    p_MemRegs = &p_FmPcd->p_FmPcdKg->p_IndirectAccessRegs->schemeRegs;
-+    intFlags = KgHwLock(p_FmPcd->p_FmPcdKg);
-+    WRITE_UINT32(p_MemRegs->kgse_ppc,   schemeRegs.kgse_ppc);
-+    WRITE_UINT32(p_MemRegs->kgse_ccbs,  schemeRegs.kgse_ccbs);
-+    WRITE_UINT32(p_MemRegs->kgse_mode,  schemeRegs.kgse_mode);
-+    WRITE_UINT32(p_MemRegs->kgse_mv,    schemeRegs.kgse_mv);
-+    WRITE_UINT32(p_MemRegs->kgse_dv0,   schemeRegs.kgse_dv0);
-+    WRITE_UINT32(p_MemRegs->kgse_dv1,   schemeRegs.kgse_dv1);
-+    WRITE_UINT32(p_MemRegs->kgse_ekdv,  schemeRegs.kgse_ekdv);
-+    WRITE_UINT32(p_MemRegs->kgse_ekfc,  schemeRegs.kgse_ekfc);
-+    WRITE_UINT32(p_MemRegs->kgse_bmch,  schemeRegs.kgse_bmch);
-+    WRITE_UINT32(p_MemRegs->kgse_bmcl,  schemeRegs.kgse_bmcl);
-+    WRITE_UINT32(p_MemRegs->kgse_hc,    schemeRegs.kgse_hc);
-+    WRITE_UINT32(p_MemRegs->kgse_spc,   schemeRegs.kgse_spc);
-+    WRITE_UINT32(p_MemRegs->kgse_fqb,   schemeRegs.kgse_fqb);
-+    WRITE_UINT32(p_MemRegs->kgse_om,    schemeRegs.kgse_om);
-+    WRITE_UINT32(p_MemRegs->kgse_vsp,   schemeRegs.kgse_vsp);
-+    for (i=0 ; i<FM_KG_NUM_OF_GENERIC_REGS ; i++)
-+        WRITE_UINT32(p_MemRegs->kgse_gec[i], schemeRegs.kgse_gec[i]);
-+
-+    /* call indirect command for scheme write */
-+    tmpKgarReg = FmPcdKgBuildWriteSchemeActionReg(physicalSchemeId, p_SchemeParams->schemeCounter.update);
-+
-+    WriteKgarWait(p_FmPcd, tmpKgarReg);
-+    KgHwUnlock(p_FmPcd->p_FmPcdKg, intFlags);
-+
-+    if (!p_SchemeParams->modify)
-+        ValidateSchemeSw(p_Scheme);
-+    else
-+        KgSchemeFlagUnlock(p_Scheme);
-+
-+    return (t_Handle)p_Scheme;
-+}
-+
-+t_Error  FM_PCD_KgSchemeDelete(t_Handle h_Scheme)
-+{
-+    t_FmPcd             *p_FmPcd;
-+    uint8_t             physicalSchemeId;
-+    uint32_t            tmpKgarReg, intFlags;
-+    t_Error             err = E_OK;
-+    t_FmPcdKgScheme     *p_Scheme = (t_FmPcdKgScheme *)h_Scheme;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_Scheme, E_INVALID_HANDLE);
-+
-+    p_FmPcd = (t_FmPcd*)(p_Scheme->h_FmPcd);
-+
-+    UpdateRequiredActionFlag(h_Scheme, FALSE);
-+
-+    /* check that no port is bound to this scheme */
-+    err = InvalidateSchemeSw(h_Scheme);
-+    if (err)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    if (p_FmPcd->h_Hc)
-+    {
-+        err = FmHcPcdKgDeleteScheme(p_FmPcd->h_Hc, h_Scheme);
-+        if (p_Scheme->p_Lock)
-+            FmPcdReleaseLock(p_FmPcd, p_Scheme->p_Lock);
-+        return err;
-+    }
-+
-+    physicalSchemeId = ((t_FmPcdKgScheme *)h_Scheme)->schemeId;
-+
-+    intFlags = KgHwLock(p_FmPcd->p_FmPcdKg);
-+    /* clear mode register, including enable bit */
-+    WRITE_UINT32(p_FmPcd->p_FmPcdKg->p_IndirectAccessRegs->schemeRegs.kgse_mode, 0);
-+
-+    /* call indirect command for scheme write */
-+    tmpKgarReg = FmPcdKgBuildWriteSchemeActionReg(physicalSchemeId, FALSE);
-+
-+    WriteKgarWait(p_FmPcd, tmpKgarReg);
-+    KgHwUnlock(p_FmPcd->p_FmPcdKg, intFlags);
-+
-+    if (p_Scheme->p_Lock)
-+        FmPcdReleaseLock(p_FmPcd, p_Scheme->p_Lock);
-+
-+    return E_OK;
-+}
-+
-+uint32_t  FM_PCD_KgSchemeGetCounter(t_Handle h_Scheme)
-+{
-+    t_FmPcd             *p_FmPcd;
-+    uint32_t            tmpKgarReg, spc, intFlags;
-+    uint8_t             physicalSchemeId;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_Scheme, E_INVALID_HANDLE, 0);
-+
-+    p_FmPcd = (t_FmPcd*)(((t_FmPcdKgScheme *)h_Scheme)->h_FmPcd);
-+    if (p_FmPcd->h_Hc)
-+        return FmHcPcdKgGetSchemeCounter(p_FmPcd->h_Hc, h_Scheme);
-+
-+    physicalSchemeId = ((t_FmPcdKgScheme *)h_Scheme)->schemeId;
-+
-+    if (FmPcdKgGetRelativeSchemeId(p_FmPcd, physicalSchemeId) == FM_PCD_KG_NUM_OF_SCHEMES)
-+        REPORT_ERROR(MAJOR, E_NOT_IN_RANGE, NO_MSG);
-+
-+    tmpKgarReg = FmPcdKgBuildReadSchemeActionReg(physicalSchemeId);
-+    intFlags = KgHwLock(p_FmPcd->p_FmPcdKg);
-+    WriteKgarWait(p_FmPcd, tmpKgarReg);
-+    if (!(GET_UINT32(p_FmPcd->p_FmPcdKg->p_IndirectAccessRegs->schemeRegs.kgse_mode) & KG_SCH_MODE_EN))
-+       REPORT_ERROR(MAJOR, E_ALREADY_EXISTS, ("Scheme is Invalid"));
-+    spc = GET_UINT32(p_FmPcd->p_FmPcdKg->p_IndirectAccessRegs->schemeRegs.kgse_spc);
-+    KgHwUnlock(p_FmPcd->p_FmPcdKg, intFlags);
-+
-+    return spc;
-+}
-+
-+t_Error  FM_PCD_KgSchemeSetCounter(t_Handle h_Scheme, uint32_t value)
-+{
-+    t_FmPcd             *p_FmPcd;
-+    uint32_t            tmpKgarReg, intFlags;
-+    uint8_t             physicalSchemeId;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_Scheme, E_INVALID_HANDLE, 0);
-+
-+    p_FmPcd = (t_FmPcd*)(((t_FmPcdKgScheme *)h_Scheme)->h_FmPcd);
-+
-+    if (!FmPcdKgIsSchemeValidSw(h_Scheme))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Requested scheme is invalid."));
-+
-+    if (p_FmPcd->h_Hc)
-+        return FmHcPcdKgSetSchemeCounter(p_FmPcd->h_Hc, h_Scheme, value);
-+
-+    physicalSchemeId = ((t_FmPcdKgScheme *)h_Scheme)->schemeId;
-+    /* check that schemeId is in range */
-+    if (FmPcdKgGetRelativeSchemeId(p_FmPcd, physicalSchemeId) == FM_PCD_KG_NUM_OF_SCHEMES)
-+        REPORT_ERROR(MAJOR, E_NOT_IN_RANGE, NO_MSG);
-+
-+    /* read specified scheme into scheme registers */
-+    tmpKgarReg = FmPcdKgBuildReadSchemeActionReg(physicalSchemeId);
-+    intFlags = KgHwLock(p_FmPcd->p_FmPcdKg);
-+    WriteKgarWait(p_FmPcd, tmpKgarReg);
-+    if (!(GET_UINT32(p_FmPcd->p_FmPcdKg->p_IndirectAccessRegs->schemeRegs.kgse_mode) & KG_SCH_MODE_EN))
-+    {
-+       KgHwUnlock(p_FmPcd->p_FmPcdKg, intFlags);
-+       RETURN_ERROR(MAJOR, E_ALREADY_EXISTS, ("Scheme is Invalid"));
-+    }
-+
-+    /* change counter value */
-+    WRITE_UINT32(p_FmPcd->p_FmPcdKg->p_IndirectAccessRegs->schemeRegs.kgse_spc, value);
-+
-+    /* call indirect command for scheme write */
-+    tmpKgarReg = FmPcdKgBuildWriteSchemeActionReg(physicalSchemeId, TRUE);
-+
-+    WriteKgarWait(p_FmPcd, tmpKgarReg);
-+    KgHwUnlock(p_FmPcd->p_FmPcdKg, intFlags);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_KgSetAdditionalDataAfterParsing(t_Handle h_FmPcd, uint8_t payloadOffset)
-+{
-+   t_FmPcd              *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+   struct fman_kg_regs  *p_Regs;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPcd->p_FmPcdDriverParam, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdKg, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs, E_NULL_POINTER);
-+
-+    p_Regs = p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs;
-+    if (!FmIsMaster(p_FmPcd->h_Fm))
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("FM_PCD_KgSetAdditionalDataAfterParsing - guest mode!"));
-+
-+    WRITE_UINT32(p_Regs->fmkg_fdor,payloadOffset);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_KgSetDfltValue(t_Handle h_FmPcd, uint8_t valueId, uint32_t value)
-+{
-+   t_FmPcd              *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+   struct fman_kg_regs  *p_Regs;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(((valueId == 0) || (valueId == 1)), E_INVALID_VALUE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPcd->p_FmPcdDriverParam, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdKg, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs, E_NULL_POINTER);
-+
-+    p_Regs = p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs;
-+
-+    if (!FmIsMaster(p_FmPcd->h_Fm))
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("FM_PCD_KgSetDfltValue - guest mode!"));
-+
-+    if (valueId == 0)
-+        WRITE_UINT32(p_Regs->fmkg_gdv0r,value);
-+    else
-+        WRITE_UINT32(p_Regs->fmkg_gdv1r,value);
-+    return E_OK;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.h
-@@ -0,0 +1,206 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_kg.h
-+
-+ @Description   FM KG private header
-+*//***************************************************************************/
-+#ifndef __FM_KG_H
-+#define __FM_KG_H
-+
-+#include "std_ext.h"
-+
-+/***********************************************************************/
-+/*          Keygen defines                                             */
-+/***********************************************************************/
-+/* maskes */
-+#if (DPAA_VERSION >= 11)
-+#define KG_SCH_VSP_SHIFT_MASK                   0x0003f000
-+#define KG_SCH_OM_VSPE                          0x00000001
-+#define KG_SCH_VSP_NO_KSP_EN                    0x80000000
-+
-+#define MAX_SP_SHIFT                            23
-+#define KG_SCH_VSP_MASK_SHIFT                   12
-+#define KG_SCH_VSP_SHIFT                        24
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+typedef uint32_t t_KnownFieldsMasks;
-+#define KG_SCH_KN_PORT_ID                   0x80000000
-+#define KG_SCH_KN_MACDST                    0x40000000
-+#define KG_SCH_KN_MACSRC                    0x20000000
-+#define KG_SCH_KN_TCI1                      0x10000000
-+#define KG_SCH_KN_TCI2                      0x08000000
-+#define KG_SCH_KN_ETYPE                     0x04000000
-+#define KG_SCH_KN_PPPSID                    0x02000000
-+#define KG_SCH_KN_PPPID                     0x01000000
-+#define KG_SCH_KN_MPLS1                     0x00800000
-+#define KG_SCH_KN_MPLS2                     0x00400000
-+#define KG_SCH_KN_MPLS_LAST                 0x00200000
-+#define KG_SCH_KN_IPSRC1                    0x00100000
-+#define KG_SCH_KN_IPDST1                    0x00080000
-+#define KG_SCH_KN_PTYPE1                    0x00040000
-+#define KG_SCH_KN_IPTOS_TC1                 0x00020000
-+#define KG_SCH_KN_IPV6FL1                   0x00010000
-+#define KG_SCH_KN_IPSRC2                    0x00008000
-+#define KG_SCH_KN_IPDST2                    0x00004000
-+#define KG_SCH_KN_PTYPE2                    0x00002000
-+#define KG_SCH_KN_IPTOS_TC2                 0x00001000
-+#define KG_SCH_KN_IPV6FL2                   0x00000800
-+#define KG_SCH_KN_GREPTYPE                  0x00000400
-+#define KG_SCH_KN_IPSEC_SPI                 0x00000200
-+#define KG_SCH_KN_IPSEC_NH                  0x00000100
-+#define KG_SCH_KN_IPPID                     0x00000080
-+#define KG_SCH_KN_L4PSRC                    0x00000004
-+#define KG_SCH_KN_L4PDST                    0x00000002
-+#define KG_SCH_KN_TFLG                      0x00000001
-+
-+typedef uint8_t t_GenericCodes;
-+#define KG_SCH_GEN_SHIM1                       0x70
-+#define KG_SCH_GEN_DEFAULT                     0x10
-+#define KG_SCH_GEN_PARSE_RESULT_N_FQID         0x20
-+#define KG_SCH_GEN_START_OF_FRM                0x40
-+#define KG_SCH_GEN_SHIM2                       0x71
-+#define KG_SCH_GEN_IP_PID_NO_V                 0x72
-+#define KG_SCH_GEN_ETH                         0x03
-+#define KG_SCH_GEN_ETH_NO_V                    0x73
-+#define KG_SCH_GEN_SNAP                        0x04
-+#define KG_SCH_GEN_SNAP_NO_V                   0x74
-+#define KG_SCH_GEN_VLAN1                       0x05
-+#define KG_SCH_GEN_VLAN1_NO_V                  0x75
-+#define KG_SCH_GEN_VLAN2                       0x06
-+#define KG_SCH_GEN_VLAN2_NO_V                  0x76
-+#define KG_SCH_GEN_ETH_TYPE                    0x07
-+#define KG_SCH_GEN_ETH_TYPE_NO_V               0x77
-+#define KG_SCH_GEN_PPP                         0x08
-+#define KG_SCH_GEN_PPP_NO_V                    0x78
-+#define KG_SCH_GEN_MPLS1                       0x09
-+#define KG_SCH_GEN_MPLS2                       0x19
-+#define KG_SCH_GEN_MPLS3                       0x29
-+#define KG_SCH_GEN_MPLS1_NO_V                  0x79
-+#define KG_SCH_GEN_MPLS_LAST                   0x0a
-+#define KG_SCH_GEN_MPLS_LAST_NO_V              0x7a
-+#define KG_SCH_GEN_IPV4                        0x0b
-+#define KG_SCH_GEN_IPV6                        0x1b
-+#define KG_SCH_GEN_L3_NO_V                     0x7b
-+#define KG_SCH_GEN_IPV4_TUNNELED               0x0c
-+#define KG_SCH_GEN_IPV6_TUNNELED               0x1c
-+#define KG_SCH_GEN_MIN_ENCAP                   0x2c
-+#define KG_SCH_GEN_IP2_NO_V                    0x7c
-+#define KG_SCH_GEN_GRE                         0x0d
-+#define KG_SCH_GEN_GRE_NO_V                    0x7d
-+#define KG_SCH_GEN_TCP                         0x0e
-+#define KG_SCH_GEN_UDP                         0x1e
-+#define KG_SCH_GEN_IPSEC_AH                    0x2e
-+#define KG_SCH_GEN_SCTP                        0x3e
-+#define KG_SCH_GEN_DCCP                        0x4e
-+#define KG_SCH_GEN_IPSEC_ESP                   0x6e
-+#define KG_SCH_GEN_L4_NO_V                     0x7e
-+#define KG_SCH_GEN_NEXTHDR                     0x7f
-+/* shifts */
-+#define KG_SCH_PP_SHIFT_HIGH_SHIFT          27
-+#define KG_SCH_PP_SHIFT_LOW_SHIFT           12
-+#define KG_SCH_PP_MASK_SHIFT                16
-+#define KG_SCH_MODE_CCOBASE_SHIFT           24
-+#define KG_SCH_DEF_MAC_ADDR_SHIFT           30
-+#define KG_SCH_DEF_TCI_SHIFT                28
-+#define KG_SCH_DEF_ENET_TYPE_SHIFT          26
-+#define KG_SCH_DEF_PPP_SESSION_ID_SHIFT     24
-+#define KG_SCH_DEF_PPP_PROTOCOL_ID_SHIFT    22
-+#define KG_SCH_DEF_MPLS_LABEL_SHIFT         20
-+#define KG_SCH_DEF_IP_ADDR_SHIFT            18
-+#define KG_SCH_DEF_PROTOCOL_TYPE_SHIFT      16
-+#define KG_SCH_DEF_IP_TOS_TC_SHIFT          14
-+#define KG_SCH_DEF_IPV6_FLOW_LABEL_SHIFT    12
-+#define KG_SCH_DEF_IPSEC_SPI_SHIFT          10
-+#define KG_SCH_DEF_L4_PORT_SHIFT            8
-+#define KG_SCH_DEF_TCP_FLAG_SHIFT           6
-+#define KG_SCH_HASH_CONFIG_SHIFT_SHIFT      24
-+#define KG_SCH_GEN_MASK_SHIFT               16
-+#define KG_SCH_GEN_HT_SHIFT                 8
-+#define KG_SCH_GEN_SIZE_SHIFT               24
-+#define KG_SCH_GEN_DEF_SHIFT                29
-+#define FM_PCD_KG_KGAR_NUM_SHIFT            16
-+
-+/* others */
-+#define NUM_OF_SW_DEFAULTS                  3
-+#define MAX_PP_SHIFT                        23
-+#define MAX_KG_SCH_SIZE                     16
-+#define MASK_FOR_GENERIC_BASE_ID            0x20
-+#define MAX_HASH_SHIFT                      40
-+#define MAX_KG_SCH_FQID_BIT_OFFSET          31
-+#define MAX_KG_SCH_PP_BIT_OFFSET            15
-+#define MAX_DIST_FQID_SHIFT                 23
-+
-+#define GET_MASK_SEL_SHIFT(shift,i)                 \
-+switch (i) {                                        \
-+    case (0):shift = 26;break;                      \
-+    case (1):shift = 20;break;                      \
-+    case (2):shift = 10;break;                      \
-+    case (3):shift = 4;break;                       \
-+    default:                                        \
-+    RETURN_ERROR(MAJOR, E_INVALID_VALUE, NO_MSG);   \
-+}
-+
-+#define GET_MASK_OFFSET_SHIFT(shift,i)              \
-+switch (i) {                                        \
-+    case (0):shift = 16;break;                      \
-+    case (1):shift = 0;break;                       \
-+    case (2):shift = 28;break;                      \
-+    case (3):shift = 24;break;                      \
-+    default:                                        \
-+    RETURN_ERROR(MAJOR, E_INVALID_VALUE, NO_MSG);   \
-+}
-+
-+#define GET_MASK_SHIFT(shift,i)                     \
-+switch (i) {                                        \
-+    case (0):shift = 24;break;                      \
-+    case (1):shift = 16;break;                      \
-+    case (2):shift = 8;break;                       \
-+    case (3):shift = 0;break;                       \
-+    default:                                        \
-+    RETURN_ERROR(MAJOR, E_INVALID_VALUE, NO_MSG);   \
-+}
-+
-+/***********************************************************************/
-+/*          Keygen defines                                             */
-+/***********************************************************************/
-+
-+#define KG_DOUBLE_MEANING_REGS_OFFSET           0x100
-+#define NO_VALIDATION                           0x70
-+#define KG_ACTION_REG_TO                        1024
-+#define KG_MAX_PROFILE                          255
-+#define SCHEME_ALWAYS_DIRECT                    0xFFFFFFFF
-+
-+
-+#endif /* __FM_KG_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_manip.c
-@@ -0,0 +1,5571 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_manip.c
-+
-+ @Description   FM PCD manip ...
-+ *//***************************************************************************/
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "string_ext.h"
-+#include "debug_ext.h"
-+#include "fm_pcd_ext.h"
-+#include "fm_port_ext.h"
-+#include "fm_muram_ext.h"
-+#include "memcpy_ext.h"
-+
-+#include "fm_common.h"
-+#include "fm_hc.h"
-+#include "fm_manip.h"
-+
-+/****************************************/
-+/*       static functions               */
-+/****************************************/
-+static t_Handle GetManipInfo(t_FmPcdManip *p_Manip, e_ManipInfo manipInfo)
-+{
-+    t_FmPcdManip *p_CurManip = p_Manip;
-+
-+    if (!MANIP_IS_UNIFIED(p_Manip))
-+        p_CurManip = p_Manip;
-+    else
-+    {
-+        /* go to first unified */
-+        while (MANIP_IS_UNIFIED_NON_FIRST(p_CurManip))
-+            p_CurManip = p_CurManip->h_PrevManip;
-+    }
-+
-+    switch (manipInfo)
-+    {
-+        case (e_MANIP_HMCT):
-+            return p_CurManip->p_Hmct;
-+        case (e_MANIP_HMTD):
-+            return p_CurManip->h_Ad;
-+        case (e_MANIP_HANDLER_TABLE_OWNER):
-+            return (t_Handle)p_CurManip;
-+        default:
-+            return NULL;
-+    }
-+}
-+
-+static uint16_t GetHmctSize(t_FmPcdManip *p_Manip)
-+{
-+    uint16_t size = 0;
-+    t_FmPcdManip *p_CurManip = p_Manip;
-+
-+    if (!MANIP_IS_UNIFIED(p_Manip))
-+        return p_Manip->tableSize;
-+
-+    /* accumulate sizes, starting with the first node */
-+    while (MANIP_IS_UNIFIED_NON_FIRST(p_CurManip))
-+        p_CurManip = p_CurManip->h_PrevManip;
-+
-+    while (MANIP_IS_UNIFIED_NON_LAST(p_CurManip))
-+    {
-+        size += p_CurManip->tableSize;
-+        p_CurManip = (t_FmPcdManip *)p_CurManip->h_NextManip;
-+    }
-+    size += p_CurManip->tableSize; /* add last size */
-+
-+    return (size);
-+}
-+
-+static uint16_t GetDataSize(t_FmPcdManip *p_Manip)
-+{
-+    uint16_t size = 0;
-+    t_FmPcdManip *p_CurManip = p_Manip;
-+
-+    if (!MANIP_IS_UNIFIED(p_Manip))
-+        return p_Manip->dataSize;
-+
-+    /* accumulate sizes, starting with the first node */
-+    while (MANIP_IS_UNIFIED_NON_FIRST(p_CurManip))
-+        p_CurManip = p_CurManip->h_PrevManip;
-+
-+    while (MANIP_IS_UNIFIED_NON_LAST(p_CurManip))
-+    {
-+        size += p_CurManip->dataSize;
-+        p_CurManip = (t_FmPcdManip *)p_CurManip->h_NextManip;
-+    }
-+    size += p_CurManip->dataSize; /* add last size */
-+
-+    return (size);
-+}
-+
-+static t_Error CalculateTableSize(t_FmPcdManipParams *p_FmPcdManipParams,
-+                                  uint16_t *p_TableSize, uint8_t *p_DataSize)
-+{
-+    uint8_t localDataSize, remain, tableSize = 0, dataSize = 0;
-+
-+    if (p_FmPcdManipParams->u.hdr.rmv)
-+    {
-+        switch (p_FmPcdManipParams->u.hdr.rmvParams.type)
-+        {
-+            case (e_FM_PCD_MANIP_RMV_GENERIC):
-+                tableSize += HMCD_BASIC_SIZE;
-+                break;
-+            case (e_FM_PCD_MANIP_RMV_BY_HDR):
-+                switch (p_FmPcdManipParams->u.hdr.rmvParams.u.byHdr.type)
-+                {
-+                    case (e_FM_PCD_MANIP_RMV_BY_HDR_SPECIFIC_L2):
-+#if (DPAA_VERSION >= 11)
-+                    case (e_FM_PCD_MANIP_RMV_BY_HDR_CAPWAP):
-+                    case (e_FM_PCD_MANIP_RMV_BY_HDR_FROM_START):
-+#endif /* (DPAA_VERSION >= 11) */
-+                        tableSize += HMCD_BASIC_SIZE;
-+                        break;
-+                    default:
-+                        RETURN_ERROR(MINOR, E_INVALID_SELECTION,
-+                                     ("Unknown byHdr.type"));
-+                }
-+                break;
-+            default:
-+                RETURN_ERROR(MINOR, E_INVALID_SELECTION,
-+                             ("Unknown rmvParams.type"));
-+        }
-+    }
-+
-+    if (p_FmPcdManipParams->u.hdr.insrt)
-+    {
-+        switch (p_FmPcdManipParams->u.hdr.insrtParams.type)
-+        {
-+            case (e_FM_PCD_MANIP_INSRT_GENERIC):
-+                remain =
-+                        (uint8_t)(p_FmPcdManipParams->u.hdr.insrtParams.u.generic.size
-+                                % 4);
-+                if (remain)
-+                    localDataSize =
-+                            (uint8_t)(p_FmPcdManipParams->u.hdr.insrtParams.u.generic.size
-+                                    + 4 - remain);
-+                else
-+                    localDataSize =
-+                            p_FmPcdManipParams->u.hdr.insrtParams.u.generic.size;
-+                tableSize += (uint8_t)(HMCD_BASIC_SIZE + localDataSize);
-+                break;
-+            case (e_FM_PCD_MANIP_INSRT_BY_HDR):
-+            {
-+                switch (p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.type)
-+                {
-+
-+                    case (e_FM_PCD_MANIP_INSRT_BY_HDR_SPECIFIC_L2):
-+                        tableSize += HMCD_BASIC_SIZE + HMCD_PTR_SIZE;
-+                        switch (p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.specificL2Params.specificL2)
-+                        {
-+                            case (e_FM_PCD_MANIP_HDR_INSRT_MPLS):
-+                            case (e_FM_PCD_MANIP_HDR_INSRT_PPPOE):
-+                                dataSize +=
-+                                        p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.specificL2Params.size;
-+                                break;
-+                            default:
-+                                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+                        }
-+                        break;
-+#if (DPAA_VERSION >= 11)
-+                    case (e_FM_PCD_MANIP_INSRT_BY_HDR_IP):
-+                        tableSize +=
-+                                (HMCD_BASIC_SIZE + HMCD_PTR_SIZE
-+                                        + HMCD_PARAM_SIZE
-+                                        + p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.ipParams.insrt.size);
-+                        dataSize += 2;
-+                        break;
-+
-+                    case (e_FM_PCD_MANIP_INSRT_BY_HDR_UDP):
-+                    case (e_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE):
-+                        tableSize += (HMCD_BASIC_SIZE + HMCD_L4_HDR_SIZE);
-+
-+                        break;
-+
-+                    case (e_FM_PCD_MANIP_INSRT_BY_HDR_CAPWAP):
-+                        tableSize +=
-+                                (HMCD_BASIC_SIZE
-+                                        + p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.insrt.size);
-+                        break;
-+#endif /* (DPAA_VERSION >= 11) */
-+                    default:
-+                        RETURN_ERROR(MINOR, E_INVALID_SELECTION,
-+                                     ("Unknown byHdr.type"));
-+                }
-+            }
-+                break;
-+            default:
-+                RETURN_ERROR(MINOR, E_INVALID_SELECTION,
-+                             ("Unknown insrtParams.type"));
-+        }
-+    }
-+
-+    if (p_FmPcdManipParams->u.hdr.fieldUpdate)
-+    {
-+        switch (p_FmPcdManipParams->u.hdr.fieldUpdateParams.type)
-+        {
-+            case (e_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN):
-+                tableSize += HMCD_BASIC_SIZE;
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.vlan.updateType
-+                        == e_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN)
-+                {
-+                    tableSize += HMCD_PTR_SIZE;
-+                    dataSize += DSCP_TO_VLAN_TABLE_SIZE;
-+                }
-+                break;
-+            case (e_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV4):
-+                tableSize += HMCD_BASIC_SIZE;
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.validUpdates
-+                        & HDR_MANIP_IPV4_ID)
-+                {
-+                    tableSize += HMCD_PARAM_SIZE;
-+                    dataSize += 2;
-+                }
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.validUpdates
-+                        & HDR_MANIP_IPV4_SRC)
-+                    tableSize += HMCD_IPV4_ADDR_SIZE;
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.validUpdates
-+                        & HDR_MANIP_IPV4_DST)
-+                    tableSize += HMCD_IPV4_ADDR_SIZE;
-+                break;
-+            case (e_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV6):
-+                tableSize += HMCD_BASIC_SIZE;
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.validUpdates
-+                        & HDR_MANIP_IPV6_SRC)
-+                    tableSize += HMCD_IPV6_ADDR_SIZE;
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.validUpdates
-+                        & HDR_MANIP_IPV6_DST)
-+                    tableSize += HMCD_IPV6_ADDR_SIZE;
-+                break;
-+            case (e_FM_PCD_MANIP_HDR_FIELD_UPDATE_TCP_UDP):
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.tcpUdp.validUpdates
-+                        == HDR_MANIP_TCP_UDP_CHECKSUM)
-+                    /* we implement this case with the update-checksum descriptor */
-+                    tableSize += HMCD_BASIC_SIZE;
-+                else
-+                    /* we implement this case with the TCP/UDP-update descriptor */
-+                    tableSize += HMCD_BASIC_SIZE + HMCD_PARAM_SIZE;
-+                break;
-+            default:
-+                RETURN_ERROR(MINOR, E_INVALID_SELECTION,
-+                             ("Unknown fieldUpdateParams.type"));
-+        }
-+    }
-+
-+    if (p_FmPcdManipParams->u.hdr.custom)
-+    {
-+        switch (p_FmPcdManipParams->u.hdr.customParams.type)
-+        {
-+            case (e_FM_PCD_MANIP_HDR_CUSTOM_IP_REPLACE):
-+            {
-+                tableSize += HMCD_BASIC_SIZE + HMCD_PARAM_SIZE + HMCD_PARAM_SIZE;
-+                dataSize +=
-+                        p_FmPcdManipParams->u.hdr.customParams.u.ipHdrReplace.hdrSize;
-+                if ((p_FmPcdManipParams->u.hdr.customParams.u.ipHdrReplace.replaceType
-+                        == e_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV6_BY_IPV4)
-+                        && (p_FmPcdManipParams->u.hdr.customParams.u.ipHdrReplace.updateIpv4Id))
-+                    dataSize += 2;
-+            }
-+                break;
-+            case (e_FM_PCD_MANIP_HDR_CUSTOM_GEN_FIELD_REPLACE):
-+                tableSize += HMCD_BASIC_SIZE + HMCD_PARAM_SIZE;
-+            break;
-+            default:
-+                RETURN_ERROR(MINOR, E_INVALID_SELECTION,
-+                             ("Unknown customParams.type"));
-+        }
-+    }
-+
-+    *p_TableSize = tableSize;
-+    *p_DataSize = dataSize;
-+
-+    return E_OK;
-+}
-+
-+static t_Error GetPrOffsetByHeaderOrField(t_FmManipHdrInfo *p_HdrInfo,
-+                                          uint8_t *parseArrayOffset)
-+{
-+    e_NetHeaderType hdr = p_HdrInfo->hdr;
-+    e_FmPcdHdrIndex hdrIndex = p_HdrInfo->hdrIndex;
-+    bool byField = p_HdrInfo->byField;
-+    t_FmPcdFields field;
-+
-+    if (byField)
-+        field = p_HdrInfo->fullField;
-+
-+    if (byField)
-+    {
-+        switch (hdr)
-+        {
-+            case (HEADER_TYPE_ETH):
-+                switch (field.eth)
-+                {
-+                    case (NET_HEADER_FIELD_ETH_TYPE):
-+                        *parseArrayOffset = CC_PC_PR_ETYPE_LAST_OFFSET;
-+                        break;
-+                    default:
-+                        RETURN_ERROR(
-+                                MAJOR,
-+                                E_NOT_SUPPORTED,
-+                                ("Header manipulation of the type Ethernet with this field not supported"));
-+                }
-+                break;
-+            case (HEADER_TYPE_VLAN):
-+                switch (field.vlan)
-+                {
-+                    case (NET_HEADER_FIELD_VLAN_TCI):
-+                        if ((hdrIndex == e_FM_PCD_HDR_INDEX_NONE)
-+                                || (hdrIndex == e_FM_PCD_HDR_INDEX_1))
-+                            *parseArrayOffset = CC_PC_PR_VLAN1_OFFSET;
-+                        else
-+                            if (hdrIndex == e_FM_PCD_HDR_INDEX_LAST)
-+                                *parseArrayOffset = CC_PC_PR_VLAN2_OFFSET;
-+                        break;
-+                    default:
-+                        RETURN_ERROR(
-+                                MAJOR,
-+                                E_NOT_SUPPORTED,
-+                                ("Header manipulation of the type VLAN with this field not supported"));
-+                }
-+                break;
-+            default:
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_NOT_SUPPORTED,
-+                        ("Header manipulation of this header by field not supported"));
-+        }
-+    }
-+    else
-+    {
-+        switch (hdr)
-+        {
-+            case (HEADER_TYPE_ETH):
-+                *parseArrayOffset = (uint8_t)CC_PC_PR_ETH_OFFSET;
-+                break;
-+            case (HEADER_TYPE_USER_DEFINED_SHIM1):
-+                *parseArrayOffset = (uint8_t)CC_PC_PR_USER_DEFINED_SHIM1_OFFSET;
-+                break;
-+            case (HEADER_TYPE_USER_DEFINED_SHIM2):
-+                *parseArrayOffset = (uint8_t)CC_PC_PR_USER_DEFINED_SHIM2_OFFSET;
-+                break;
-+            case (HEADER_TYPE_LLC_SNAP):
-+                *parseArrayOffset = CC_PC_PR_USER_LLC_SNAP_OFFSET;
-+                break;
-+            case (HEADER_TYPE_PPPoE):
-+                *parseArrayOffset = CC_PC_PR_PPPOE_OFFSET;
-+                break;
-+            case (HEADER_TYPE_MPLS):
-+                if ((hdrIndex == e_FM_PCD_HDR_INDEX_NONE)
-+                        || (hdrIndex == e_FM_PCD_HDR_INDEX_1))
-+                    *parseArrayOffset = CC_PC_PR_MPLS1_OFFSET;
-+                else
-+                    if (hdrIndex == e_FM_PCD_HDR_INDEX_LAST)
-+                        *parseArrayOffset = CC_PC_PR_MPLS_LAST_OFFSET;
-+                break;
-+            case (HEADER_TYPE_IPv4):
-+            case (HEADER_TYPE_IPv6):
-+                if ((hdrIndex == e_FM_PCD_HDR_INDEX_NONE)
-+                        || (hdrIndex == e_FM_PCD_HDR_INDEX_1))
-+                    *parseArrayOffset = CC_PC_PR_IP1_OFFSET;
-+                else
-+                    if (hdrIndex == e_FM_PCD_HDR_INDEX_2)
-+                        *parseArrayOffset = CC_PC_PR_IP_LAST_OFFSET;
-+                break;
-+            case (HEADER_TYPE_MINENCAP):
-+                *parseArrayOffset = CC_PC_PR_MINENC_OFFSET;
-+                break;
-+            case (HEADER_TYPE_GRE):
-+                *parseArrayOffset = CC_PC_PR_GRE_OFFSET;
-+                break;
-+            case (HEADER_TYPE_TCP):
-+            case (HEADER_TYPE_UDP):
-+            case (HEADER_TYPE_IPSEC_AH):
-+            case (HEADER_TYPE_IPSEC_ESP):
-+            case (HEADER_TYPE_DCCP):
-+            case (HEADER_TYPE_SCTP):
-+                *parseArrayOffset = CC_PC_PR_L4_OFFSET;
-+                break;
-+            case (HEADER_TYPE_CAPWAP):
-+            case (HEADER_TYPE_CAPWAP_DTLS):
-+                *parseArrayOffset = CC_PC_PR_NEXT_HEADER_OFFSET;
-+                break;
-+            default:
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_NOT_SUPPORTED,
-+                        ("Header manipulation of this header is not supported"));
-+        }
-+    }
-+    return E_OK;
-+}
-+
-+static t_Error BuildHmct(t_FmPcdManip *p_Manip,
-+                         t_FmPcdManipParams *p_FmPcdManipParams,
-+                         uint8_t *p_DestHmct, uint8_t *p_DestData, bool new)
-+{
-+    uint32_t *p_TmpHmct = (uint32_t*)p_DestHmct, *p_LocalData;
-+    uint32_t tmpReg = 0, *p_Last = NULL, tmp_ipv6_addr;
-+    uint8_t remain, i, size = 0, origSize, *p_UsrData = NULL, *p_TmpData =
-+            p_DestData;
-+    t_Handle h_FmPcd = p_Manip->h_FmPcd;
-+    uint8_t j = 0;
-+
-+    if (p_FmPcdManipParams->u.hdr.rmv)
-+    {
-+        if (p_FmPcdManipParams->u.hdr.rmvParams.type
-+                == e_FM_PCD_MANIP_RMV_GENERIC)
-+        {
-+            /* initialize HMCD */
-+            tmpReg = (uint32_t)(HMCD_OPCODE_GENERIC_RMV) << HMCD_OC_SHIFT;
-+            /* tmp, should be conditional */
-+            tmpReg |= p_FmPcdManipParams->u.hdr.rmvParams.u.generic.offset
-+                    << HMCD_RMV_OFFSET_SHIFT;
-+            tmpReg |= p_FmPcdManipParams->u.hdr.rmvParams.u.generic.size
-+                    << HMCD_RMV_SIZE_SHIFT;
-+        }
-+        else
-+            if (p_FmPcdManipParams->u.hdr.rmvParams.type
-+                    == e_FM_PCD_MANIP_RMV_BY_HDR)
-+            {
-+                switch (p_FmPcdManipParams->u.hdr.rmvParams.u.byHdr.type)
-+                {
-+                    case (e_FM_PCD_MANIP_RMV_BY_HDR_SPECIFIC_L2):
-+                    {
-+                        uint8_t hmcdOpt;
-+
-+                        /* initialize HMCD */
-+                        tmpReg = (uint32_t)(HMCD_OPCODE_L2_RMV) << HMCD_OC_SHIFT;
-+
-+                        switch (p_FmPcdManipParams->u.hdr.rmvParams.u.byHdr.u.specificL2)
-+                        {
-+                            case (e_FM_PCD_MANIP_HDR_RMV_ETHERNET):
-+                                hmcdOpt = HMCD_RMV_L2_ETHERNET;
-+                                break;
-+                            case (e_FM_PCD_MANIP_HDR_RMV_STACKED_QTAGS):
-+                                hmcdOpt = HMCD_RMV_L2_STACKED_QTAGS;
-+                                break;
-+                            case (e_FM_PCD_MANIP_HDR_RMV_ETHERNET_AND_MPLS):
-+                                hmcdOpt = HMCD_RMV_L2_ETHERNET_AND_MPLS;
-+                                break;
-+                            case (e_FM_PCD_MANIP_HDR_RMV_MPLS):
-+                                hmcdOpt = HMCD_RMV_L2_MPLS;
-+                                break;
-+                            case (e_FM_PCD_MANIP_HDR_RMV_PPPOE):
-+                                hmcdOpt = HMCD_RMV_L2_PPPOE;
-+                                break;
-+                            default:
-+                                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+                        }
-+                        tmpReg |= hmcdOpt << HMCD_L2_MODE_SHIFT;
-+                        break;
-+                    }
-+#if (DPAA_VERSION >= 11)
-+                    case (e_FM_PCD_MANIP_RMV_BY_HDR_CAPWAP):
-+                        tmpReg = (uint32_t)(HMCD_OPCODE_CAPWAP_RMV)
-+                                << HMCD_OC_SHIFT;
-+                        break;
-+                    case (e_FM_PCD_MANIP_RMV_BY_HDR_FROM_START):
-+                    {
-+                        uint8_t prsArrayOffset;
-+                        t_Error err = E_OK;
-+
-+                        tmpReg = (uint32_t)(HMCD_OPCODE_RMV_TILL)
-+                                << HMCD_OC_SHIFT;
-+
-+                        err =
-+                                GetPrOffsetByHeaderOrField(
-+                                        &p_FmPcdManipParams->u.hdr.rmvParams.u.byHdr.u.hdrInfo,
-+                                        &prsArrayOffset);
-+                        ASSERT_COND(!err);
-+                        /* was previously checked */
-+
-+                        tmpReg |= ((uint32_t)prsArrayOffset << 16);
-+                    }
-+                        break;
-+#endif /* (DPAA_VERSION >= 11) */
-+                    default:
-+                        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                                     ("manip header remove by hdr type!"));
-+                }
-+            }
-+
-+        WRITE_UINT32(*p_TmpHmct, tmpReg);
-+        /* save a pointer to the "last" indication word */
-+        p_Last = p_TmpHmct;
-+        /* advance to next command */
-+        p_TmpHmct += HMCD_BASIC_SIZE / 4;
-+    }
-+
-+    if (p_FmPcdManipParams->u.hdr.insrt)
-+    {
-+        if (p_FmPcdManipParams->u.hdr.insrtParams.type
-+                == e_FM_PCD_MANIP_INSRT_GENERIC)
-+        {
-+            /* initialize HMCD */
-+            if (p_FmPcdManipParams->u.hdr.insrtParams.u.generic.replace)
-+                tmpReg = (uint32_t)(HMCD_OPCODE_GENERIC_REPLACE)
-+                        << HMCD_OC_SHIFT;
-+            else
-+                tmpReg = (uint32_t)(HMCD_OPCODE_GENERIC_INSRT) << HMCD_OC_SHIFT;
-+
-+            tmpReg |= p_FmPcdManipParams->u.hdr.insrtParams.u.generic.offset
-+                    << HMCD_INSRT_OFFSET_SHIFT;
-+            tmpReg |= p_FmPcdManipParams->u.hdr.insrtParams.u.generic.size
-+                    << HMCD_INSRT_SIZE_SHIFT;
-+
-+            size = p_FmPcdManipParams->u.hdr.insrtParams.u.generic.size;
-+            p_UsrData = p_FmPcdManipParams->u.hdr.insrtParams.u.generic.p_Data;
-+
-+            WRITE_UINT32(*p_TmpHmct, tmpReg);
-+            /* save a pointer to the "last" indication word */
-+            p_Last = p_TmpHmct;
-+
-+            p_TmpHmct += HMCD_BASIC_SIZE / 4;
-+
-+            /* initialize data to be inserted */
-+            /* if size is not a multiple of 4, padd with 0's */
-+            origSize = size;
-+            remain = (uint8_t)(size % 4);
-+            if (remain)
-+            {
-+                size += (uint8_t)(4 - remain);
-+                p_LocalData = (uint32_t *)XX_Malloc(size);
-+                memset((uint8_t *)p_LocalData, 0, size);
-+                memcpy((uint8_t *)p_LocalData, p_UsrData, origSize);
-+            }
-+            else
-+                p_LocalData = (uint32_t*)p_UsrData;
-+
-+            /* initialize data and advance pointer to next command */
-+            MemCpy8(p_TmpHmct, p_LocalData, size);
-+            p_TmpHmct += size / sizeof(uint32_t);
-+
-+            if (remain)
-+                XX_Free(p_LocalData);
-+        }
-+
-+        else
-+            if (p_FmPcdManipParams->u.hdr.insrtParams.type
-+                    == e_FM_PCD_MANIP_INSRT_BY_HDR)
-+            {
-+                switch (p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.type)
-+                {
-+                    case (e_FM_PCD_MANIP_INSRT_BY_HDR_SPECIFIC_L2):
-+                    {
-+                        uint8_t hmcdOpt;
-+
-+                        /* initialize HMCD */
-+                        tmpReg = (uint32_t)(HMCD_OPCODE_L2_INSRT)
-+                                << HMCD_OC_SHIFT;
-+
-+                        switch (p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.specificL2Params.specificL2)
-+                        {
-+                            case (e_FM_PCD_MANIP_HDR_INSRT_MPLS):
-+                                if (p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.specificL2Params.update)
-+                                    hmcdOpt = HMCD_INSRT_N_UPDATE_L2_MPLS;
-+                                else
-+                                    hmcdOpt = HMCD_INSRT_L2_MPLS;
-+                                break;
-+                            case (e_FM_PCD_MANIP_HDR_INSRT_PPPOE):
-+                                hmcdOpt = HMCD_INSRT_L2_PPPOE;
-+                                break;
-+                            default:
-+                                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+                        }
-+                        tmpReg |= hmcdOpt << HMCD_L2_MODE_SHIFT;
-+
-+                        WRITE_UINT32(*p_TmpHmct, tmpReg);
-+                        /* save a pointer to the "last" indication word */
-+                        p_Last = p_TmpHmct;
-+
-+                        p_TmpHmct += HMCD_BASIC_SIZE / 4;
-+
-+                        /* set size and pointer of user's data */
-+                        size =
-+                                (uint8_t)p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.specificL2Params.size;
-+
-+                        ASSERT_COND(p_TmpData);
-+                        MemCpy8(
-+                                p_TmpData,
-+                                p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.specificL2Params.p_Data,
-+                                size);
-+                        tmpReg =
-+                                (size << HMCD_INSRT_L2_SIZE_SHIFT)
-+                                        | (uint32_t)(XX_VirtToPhys(p_TmpData)
-+                                                - (((t_FmPcd*)h_FmPcd)->physicalMuramBase));
-+                        WRITE_UINT32(*p_TmpHmct, tmpReg);
-+                        p_TmpHmct += HMCD_PTR_SIZE / 4;
-+                        p_TmpData += size;
-+                    }
-+                        break;
-+#if (DPAA_VERSION >= 11)
-+                    case (e_FM_PCD_MANIP_INSRT_BY_HDR_IP):
-+                        tmpReg = (uint32_t)(HMCD_OPCODE_IP_INSRT)
-+                                << HMCD_OC_SHIFT;
-+                        if (p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.ipParams.calcL4Checksum)
-+                            tmpReg |= HMCD_IP_L4_CS_CALC;
-+                        if (p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.ipParams.mappingMode
-+                                == e_FM_PCD_MANIP_HDR_QOS_MAPPING_AS_IS)
-+                            tmpReg |= HMCD_IP_OR_QOS;
-+                        tmpReg |=
-+                                p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.ipParams.lastPidOffset
-+                                        & HMCD_IP_LAST_PID_MASK;
-+                        tmpReg |=
-+                                ((p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.ipParams.insrt.size
-+                                        << HMCD_IP_SIZE_SHIFT)
-+                                        & HMCD_IP_SIZE_MASK);
-+                        if (p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.ipParams.dontFragOverwrite)
-+                            tmpReg |= HMCD_IP_DF_MODE;
-+
-+                        WRITE_UINT32(*p_TmpHmct, tmpReg);
-+
-+                        /* save a pointer to the "last" indication word */
-+                        p_Last = p_TmpHmct;
-+
-+                        p_TmpHmct += HMCD_BASIC_SIZE / 4;
-+
-+                        /* set IP id */
-+                        ASSERT_COND(p_TmpData);
-+                        WRITE_UINT16(
-+                                *(uint16_t*)p_TmpData,
-+                                p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.ipParams.id);
-+                        WRITE_UINT32(
-+                                *p_TmpHmct,
-+                                (uint32_t)(XX_VirtToPhys(p_TmpData) - (((t_FmPcd*)p_Manip->h_FmPcd)->physicalMuramBase)));
-+                        p_TmpData += 2;
-+                        p_TmpHmct += HMCD_PTR_SIZE / 4;
-+
-+                        WRITE_UINT8(*p_TmpHmct, p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.ipParams.lastDstOffset);
-+                        p_TmpHmct += HMCD_PARAM_SIZE / 4;
-+
-+                        MemCpy8(
-+                                p_TmpHmct,
-+                                p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.ipParams.insrt.p_Data,
-+                                p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.ipParams.insrt.size);
-+                        p_TmpHmct +=
-+                                p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.ipParams.insrt.size
-+                                        / 4;
-+                        break;
-+                    case (e_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE):
-+                        tmpReg = HMCD_INSRT_UDP_LITE;
-+                    case (e_FM_PCD_MANIP_INSRT_BY_HDR_UDP):
-+                        tmpReg |= (uint32_t)(HMCD_OPCODE_UDP_INSRT)
-+                                << HMCD_OC_SHIFT;
-+
-+                        WRITE_UINT32(*p_TmpHmct, tmpReg);
-+
-+                        /* save a pointer to the "last" indication word */
-+                        p_Last = p_TmpHmct;
-+
-+                        p_TmpHmct += HMCD_BASIC_SIZE / 4;
-+
-+                        MemCpy8(
-+                                p_TmpHmct,
-+                                p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.insrt.p_Data,
-+                                p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.insrt.size);
-+                        p_TmpHmct +=
-+                                p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.insrt.size
-+                                        / 4;
-+                        break;
-+                    case (e_FM_PCD_MANIP_INSRT_BY_HDR_CAPWAP):
-+                        tmpReg = (uint32_t)(HMCD_OPCODE_CAPWAP_INSRT)
-+                                << HMCD_OC_SHIFT;
-+                        tmpReg |= HMCD_CAPWAP_INSRT;
-+
-+                        WRITE_UINT32(*p_TmpHmct, tmpReg);
-+
-+                        /* save a pointer to the "last" indication word */
-+                        p_Last = p_TmpHmct;
-+
-+                        p_TmpHmct += HMCD_BASIC_SIZE / 4;
-+
-+                        MemCpy8(
-+                                p_TmpHmct,
-+                                p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.insrt.p_Data,
-+                                p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.insrt.size);
-+                        p_TmpHmct +=
-+                                p_FmPcdManipParams->u.hdr.insrtParams.u.byHdr.u.insrt.size
-+                                        / 4;
-+                        break;
-+#endif /* (DPAA_VERSION >= 11) */
-+                    default:
-+                        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                                     ("manip header insert by header type!"));
-+
-+                }
-+            }
-+    }
-+
-+    if (p_FmPcdManipParams->u.hdr.fieldUpdate)
-+    {
-+        switch (p_FmPcdManipParams->u.hdr.fieldUpdateParams.type)
-+        {
-+            case (e_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN):
-+                /* set opcode */
-+                tmpReg = (uint32_t)(HMCD_OPCODE_VLAN_PRI_UPDATE)
-+                        << HMCD_OC_SHIFT;
-+
-+                /* set mode & table pointer */
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.vlan.updateType
-+                        == e_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN)
-+                {
-+                    /* set Mode */
-+                    tmpReg |= (uint32_t)(HMCD_VLAN_PRI_UPDATE_DSCP_TO_VPRI)
-+                            << HMCD_VLAN_PRI_REP_MODE_SHIFT;
-+                    /* set VPRI default */
-+                    tmpReg |=
-+                            p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.vlan.u.dscpToVpri.vpriDefVal;
-+                    WRITE_UINT32(*p_TmpHmct, tmpReg);
-+                    /* save a pointer to the "last" indication word */
-+                    p_Last = p_TmpHmct;
-+                    /* write the table pointer into the Manip descriptor */
-+                    p_TmpHmct += HMCD_BASIC_SIZE / 4;
-+
-+                    tmpReg = 0;
-+                    ASSERT_COND(p_TmpData);
-+                    for (i = 0; i < HMCD_DSCP_VALUES; i++)
-+                    {
-+                        /* first we build from each 8 values a 32bit register */
-+                        tmpReg |=
-+                                (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.vlan.u.dscpToVpri.dscpToVpriTable[i])
-+                                        << (32 - 4 * (j + 1));
-+                        j++;
-+                        /* Than we write this register to the next table word
-+                         * (i=7-->word 0, i=15-->word 1,... i=63-->word 7) */
-+                        if ((i % 8) == 7)
-+                        {
-+                            WRITE_UINT32(*((uint32_t*)p_TmpData + (i+1)/8-1),
-+                                         tmpReg);
-+                            tmpReg = 0;
-+                            j = 0;
-+                        }
-+                    }
-+
-+                    WRITE_UINT32(
-+                            *p_TmpHmct,
-+                            (uint32_t)(XX_VirtToPhys(p_TmpData) - (((t_FmPcd*)h_FmPcd)->physicalMuramBase)));
-+                    p_TmpHmct += HMCD_PTR_SIZE / 4;
-+
-+                    p_TmpData += DSCP_TO_VLAN_TABLE_SIZE;
-+                }
-+                else
-+                    if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.vlan.updateType
-+                            == e_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN_VPRI)
-+                    {
-+                        /* set Mode */
-+                        /* line commented out as it has no-side-effect ('0' value). */
-+                        /*tmpReg |= HMCD_VLAN_PRI_UPDATE << HMCD_VLAN_PRI_REP_MODE_SHIFT*/;
-+                        /* set VPRI parameter */
-+                        tmpReg |=
-+                                p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.vlan.u.vpri;
-+                        WRITE_UINT32(*p_TmpHmct, tmpReg);
-+                        /* save a pointer to the "last" indication word */
-+                        p_Last = p_TmpHmct;
-+                        p_TmpHmct += HMCD_BASIC_SIZE / 4;
-+                    }
-+                break;
-+
-+            case (e_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV4):
-+                /* set opcode */
-+                tmpReg = (uint32_t)(HMCD_OPCODE_IPV4_UPDATE) << HMCD_OC_SHIFT;
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.validUpdates
-+                        & HDR_MANIP_IPV4_TTL)
-+                    tmpReg |= HMCD_IPV4_UPDATE_TTL;
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.validUpdates
-+                        & HDR_MANIP_IPV4_TOS)
-+                {
-+                    tmpReg |= HMCD_IPV4_UPDATE_TOS;
-+                    tmpReg |=
-+                            p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.tos
-+                                    << HMCD_IPV4_UPDATE_TOS_SHIFT;
-+                }
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.validUpdates
-+                        & HDR_MANIP_IPV4_ID)
-+                    tmpReg |= HMCD_IPV4_UPDATE_ID;
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.validUpdates
-+                        & HDR_MANIP_IPV4_SRC)
-+                    tmpReg |= HMCD_IPV4_UPDATE_SRC;
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.validUpdates
-+                        & HDR_MANIP_IPV4_DST)
-+                    tmpReg |= HMCD_IPV4_UPDATE_DST;
-+                /* write the first 4 bytes of the descriptor */
-+                WRITE_UINT32(*p_TmpHmct, tmpReg);
-+                /* save a pointer to the "last" indication word */
-+                p_Last = p_TmpHmct;
-+
-+                p_TmpHmct += HMCD_BASIC_SIZE / 4;
-+
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.validUpdates
-+                        & HDR_MANIP_IPV4_ID)
-+                {
-+                    ASSERT_COND(p_TmpData);
-+                    WRITE_UINT16(
-+                            *(uint16_t*)p_TmpData,
-+                            p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.id);
-+                    WRITE_UINT32(
-+                            *p_TmpHmct,
-+                            (uint32_t)(XX_VirtToPhys(p_TmpData) - (((t_FmPcd*)p_Manip->h_FmPcd)->physicalMuramBase)));
-+                    p_TmpData += 2;
-+                    p_TmpHmct += HMCD_PTR_SIZE / 4;
-+                }
-+
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.validUpdates
-+                        & HDR_MANIP_IPV4_SRC)
-+                {
-+                    WRITE_UINT32(
-+                            *p_TmpHmct,
-+                            p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.src);
-+                    p_TmpHmct += HMCD_IPV4_ADDR_SIZE / 4;
-+                }
-+
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.validUpdates
-+                        & HDR_MANIP_IPV4_DST)
-+                {
-+                    WRITE_UINT32(
-+                            *p_TmpHmct,
-+                            p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv4.dst);
-+                    p_TmpHmct += HMCD_IPV4_ADDR_SIZE / 4;
-+                }
-+                break;
-+
-+            case (e_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV6):
-+                /* set opcode */
-+                tmpReg = (uint32_t)(HMCD_OPCODE_IPV6_UPDATE) << HMCD_OC_SHIFT;
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv6.validUpdates
-+                        & HDR_MANIP_IPV6_HL)
-+                    tmpReg |= HMCD_IPV6_UPDATE_HL;
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv6.validUpdates
-+                        & HDR_MANIP_IPV6_TC)
-+                {
-+                    tmpReg |= HMCD_IPV6_UPDATE_TC;
-+                    tmpReg |=
-+                            p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv6.trafficClass
-+                                    << HMCD_IPV6_UPDATE_TC_SHIFT;
-+                }
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv6.validUpdates
-+                        & HDR_MANIP_IPV6_SRC)
-+                    tmpReg |= HMCD_IPV6_UPDATE_SRC;
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv6.validUpdates
-+                        & HDR_MANIP_IPV6_DST)
-+                    tmpReg |= HMCD_IPV6_UPDATE_DST;
-+                /* write the first 4 bytes of the descriptor */
-+                WRITE_UINT32(*p_TmpHmct, tmpReg);
-+                /* save a pointer to the "last" indication word */
-+                p_Last = p_TmpHmct;
-+
-+                p_TmpHmct += HMCD_BASIC_SIZE / 4;
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv6.validUpdates
-+                        & HDR_MANIP_IPV6_SRC)
-+                {
-+                    for (i = 0; i < NET_HEADER_FIELD_IPv6_ADDR_SIZE; i += 4)
-+                    {
-+                        memcpy(&tmp_ipv6_addr,
-+                               &p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv6.src[i],
-+                               sizeof(uint32_t));
-+                        WRITE_UINT32(*p_TmpHmct, tmp_ipv6_addr);
-+                        p_TmpHmct += HMCD_PTR_SIZE / 4;
-+                    }
-+                }
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv6.validUpdates
-+                        & HDR_MANIP_IPV6_DST)
-+                {
-+                    for (i = 0; i < NET_HEADER_FIELD_IPv6_ADDR_SIZE; i += 4)
-+                    {
-+                        memcpy(&tmp_ipv6_addr,
-+                               &p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.ipv6.dst[i],
-+                               sizeof(uint32_t));
-+                        WRITE_UINT32(*p_TmpHmct, tmp_ipv6_addr);
-+                        p_TmpHmct += HMCD_PTR_SIZE / 4;
-+                    }
-+                }
-+                break;
-+
-+            case (e_FM_PCD_MANIP_HDR_FIELD_UPDATE_TCP_UDP):
-+                if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.tcpUdp.validUpdates
-+                        == HDR_MANIP_TCP_UDP_CHECKSUM)
-+                {
-+                    /* we implement this case with the update-checksum descriptor */
-+                    /* set opcode */
-+                    tmpReg = (uint32_t)(HMCD_OPCODE_TCP_UDP_CHECKSUM)
-+                            << HMCD_OC_SHIFT;
-+                    /* write the first 4 bytes of the descriptor */
-+                    WRITE_UINT32(*p_TmpHmct, tmpReg);
-+                    /* save a pointer to the "last" indication word */
-+                    p_Last = p_TmpHmct;
-+
-+                    p_TmpHmct += HMCD_BASIC_SIZE / 4;
-+                }
-+                else
-+                {
-+                    /* we implement this case with the TCP/UDP update descriptor */
-+                    /* set opcode */
-+                    tmpReg = (uint32_t)(HMCD_OPCODE_TCP_UDP_UPDATE)
-+                            << HMCD_OC_SHIFT;
-+                    if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.tcpUdp.validUpdates
-+                            & HDR_MANIP_TCP_UDP_DST)
-+                        tmpReg |= HMCD_TCP_UDP_UPDATE_DST;
-+                    if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.tcpUdp.validUpdates
-+                            & HDR_MANIP_TCP_UDP_SRC)
-+                        tmpReg |= HMCD_TCP_UDP_UPDATE_SRC;
-+                    /* write the first 4 bytes of the descriptor */
-+                    WRITE_UINT32(*p_TmpHmct, tmpReg);
-+                    /* save a pointer to the "last" indication word */
-+                    p_Last = p_TmpHmct;
-+
-+                    p_TmpHmct += HMCD_BASIC_SIZE / 4;
-+
-+                    tmpReg = 0;
-+                    if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.tcpUdp.validUpdates
-+                            & HDR_MANIP_TCP_UDP_SRC)
-+                        tmpReg |=
-+                                ((uint32_t)p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.tcpUdp.src)
-+                                        << HMCD_TCP_UDP_UPDATE_SRC_SHIFT;
-+                    if (p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.tcpUdp.validUpdates
-+                            & HDR_MANIP_TCP_UDP_DST)
-+                        tmpReg |=
-+                                ((uint32_t)p_FmPcdManipParams->u.hdr.fieldUpdateParams.u.tcpUdp.dst);
-+                    WRITE_UINT32(*p_TmpHmct, tmpReg);
-+                    p_TmpHmct += HMCD_PTR_SIZE / 4;
-+                }
-+                break;
-+
-+            default:
-+                RETURN_ERROR(MINOR, E_INVALID_SELECTION,
-+                             ("Unknown fieldUpdateParams.type"));
-+        }
-+    }
-+
-+    if (p_FmPcdManipParams->u.hdr.custom)
-+    {
-+        switch (p_FmPcdManipParams->u.hdr.customParams.type)
-+        {
-+            case (e_FM_PCD_MANIP_HDR_CUSTOM_IP_REPLACE):
-+                /* set opcode */
-+                tmpReg = (uint32_t)(HMCD_OPCODE_REPLACE_IP) << HMCD_OC_SHIFT;
-+
-+                if (p_FmPcdManipParams->u.hdr.customParams.u.ipHdrReplace.decTtlHl)
-+                    tmpReg |= HMCD_IP_REPLACE_TTL_HL;
-+                if (p_FmPcdManipParams->u.hdr.customParams.u.ipHdrReplace.replaceType
-+                        == e_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV4_BY_IPV6)
-+                    /* line commented out as it has no-side-effect ('0' value). */
-+                    /*tmpReg |= HMCD_IP_REPLACE_REPLACE_IPV4*/;
-+                else
-+                    if (p_FmPcdManipParams->u.hdr.customParams.u.ipHdrReplace.replaceType
-+                            == e_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV6_BY_IPV4)
-+                    {
-+                        tmpReg |= HMCD_IP_REPLACE_REPLACE_IPV6;
-+                        if (p_FmPcdManipParams->u.hdr.customParams.u.ipHdrReplace.updateIpv4Id)
-+                            tmpReg |= HMCD_IP_REPLACE_ID;
-+                    }
-+                    else
-+                        RETURN_ERROR(
-+                                MINOR,
-+                                E_NOT_SUPPORTED,
-+                                ("One flag out of HDR_MANIP_IP_REPLACE_IPV4, HDR_MANIP_IP_REPLACE_IPV6 - must be set."));
-+
-+                /* write the first 4 bytes of the descriptor */
-+                WRITE_UINT32(*p_TmpHmct, tmpReg);
-+                /* save a pointer to the "last" indication word */
-+                p_Last = p_TmpHmct;
-+
-+                p_TmpHmct += HMCD_BASIC_SIZE / 4;
-+
-+                size =
-+                        p_FmPcdManipParams->u.hdr.customParams.u.ipHdrReplace.hdrSize;
-+                ASSERT_COND(p_TmpData);
-+                MemCpy8(
-+                        p_TmpData,
-+                        p_FmPcdManipParams->u.hdr.customParams.u.ipHdrReplace.hdr,
-+                        size);
-+                tmpReg = (uint32_t)(size << HMCD_IP_REPLACE_L3HDRSIZE_SHIFT);
-+                tmpReg |= (uint32_t)(XX_VirtToPhys(p_TmpData)
-+                        - (((t_FmPcd*)h_FmPcd)->physicalMuramBase));
-+                WRITE_UINT32(*p_TmpHmct, tmpReg);
-+                p_TmpHmct += HMCD_PTR_SIZE / 4;
-+                p_TmpData += size;
-+
-+                if ((p_FmPcdManipParams->u.hdr.customParams.u.ipHdrReplace.replaceType
-+                        == e_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV6_BY_IPV4)
-+                        && (p_FmPcdManipParams->u.hdr.customParams.u.ipHdrReplace.updateIpv4Id))
-+                {
-+                    WRITE_UINT16(
-+                            *(uint16_t*)p_TmpData,
-+                            p_FmPcdManipParams->u.hdr.customParams.u.ipHdrReplace.id);
-+                    WRITE_UINT32(
-+                            *p_TmpHmct,
-+                            (uint32_t)(XX_VirtToPhys(p_TmpData) - (((t_FmPcd*)h_FmPcd)->physicalMuramBase)));
-+                    p_TmpData += 2;
-+                }
-+                p_TmpHmct += HMCD_PTR_SIZE / 4;
-+                break;
-+            case (e_FM_PCD_MANIP_HDR_CUSTOM_GEN_FIELD_REPLACE):
-+                /* set opcode */
-+                tmpReg = (uint32_t)(HMCD_OPCODE_GEN_FIELD_REPLACE) << HMCD_OC_SHIFT;
-+                tmpReg |= p_FmPcdManipParams->u.hdr.customParams.u.genFieldReplace.size << HMCD_GEN_FIELD_SIZE_SHIFT;
-+                tmpReg |= p_FmPcdManipParams->u.hdr.customParams.u.genFieldReplace.srcOffset << HMCD_GEN_FIELD_SRC_OFF_SHIFT;
-+                tmpReg |= p_FmPcdManipParams->u.hdr.customParams.u.genFieldReplace.dstOffset << HMCD_GEN_FIELD_DST_OFF_SHIFT;
-+                if (p_FmPcdManipParams->u.hdr.customParams.u.genFieldReplace.mask)
-+                    tmpReg |= HMCD_GEN_FIELD_MASK_EN;
-+
-+                /* write the first 4 bytes of the descriptor */
-+                WRITE_UINT32(*p_TmpHmct, tmpReg);
-+                /* save a pointer to the "last" indication word */
-+                p_Last = p_TmpHmct;
-+
-+                p_TmpHmct += HMCD_BASIC_SIZE/4;
-+
-+                if (p_FmPcdManipParams->u.hdr.customParams.u.genFieldReplace.mask)
-+                {
-+                    tmpReg = p_FmPcdManipParams->u.hdr.customParams.u.genFieldReplace.mask << HMCD_GEN_FIELD_MASK_SHIFT;
-+                    tmpReg |= p_FmPcdManipParams->u.hdr.customParams.u.genFieldReplace.maskOffset << HMCD_GEN_FIELD_MASK_OFF_SHIFT;
-+                    /* write the next 4 bytes of the descriptor */
-+                    WRITE_UINT32(*p_TmpHmct, tmpReg);
-+                }
-+                p_TmpHmct += HMCD_PARAM_SIZE/4;
-+                break;
-+            default:
-+                RETURN_ERROR(MINOR, E_INVALID_SELECTION,
-+                             ("Unknown customParams.type"));
-+        }
-+    }
-+
-+    /* If this node has a nextManip, and no parsing is required, the old table must be copied to the new table
-+     the old table and should be freed */
-+    if (p_FmPcdManipParams->h_NextManip
-+            && (p_Manip->nextManipType == e_FM_PCD_MANIP_HDR)
-+            && (MANIP_DONT_REPARSE(p_Manip)))
-+    {
-+        if (new)
-+        {
-+            /* If this is the first time this manip is created we need to free unused memory. If it
-+             * is a dynamic changes case, the memory used is either the CC shadow or the existing
-+             * table - no allocation, no free */
-+            MANIP_UPDATE_UNIFIED_POSITION(p_FmPcdManipParams->h_NextManip);
-+
-+            p_Manip->unifiedPosition = e_MANIP_UNIFIED_FIRST;
-+        }
-+    }
-+    else
-+    {
-+        ASSERT_COND(p_Last);
-+        /* set the "last" indication on the last command of the current table */
-+        WRITE_UINT32(*p_Last, GET_UINT32(*p_Last) | HMCD_LAST);
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error CreateManipActionNew(t_FmPcdManip *p_Manip,
-+                                    t_FmPcdManipParams *p_FmPcdManipParams)
-+{
-+    t_FmPcdManip *p_CurManip;
-+    t_Error err;
-+    uint32_t nextSize = 0, totalSize;
-+    uint16_t tmpReg;
-+    uint8_t *p_OldHmct, *p_TmpHmctPtr, *p_TmpDataPtr;
-+
-+    /* set Manip structure */
-+
-+    p_Manip->dontParseAfterManip =
-+            p_FmPcdManipParams->u.hdr.dontParseAfterManip;
-+
-+    if (p_FmPcdManipParams->h_NextManip)
-+    {   /* Next Header manipulation exists */
-+        p_Manip->nextManipType = MANIP_GET_TYPE(p_FmPcdManipParams->h_NextManip);
-+
-+        if ((p_Manip->nextManipType == e_FM_PCD_MANIP_HDR) && p_Manip->dontParseAfterManip)
-+            nextSize = (uint32_t)(GetHmctSize(p_FmPcdManipParams->h_NextManip)
-+                    + GetDataSize(p_FmPcdManipParams->h_NextManip));
-+        else /* either parsing is required or next manip is Frag; no table merging. */
-+            p_Manip->cascaded = TRUE;
-+        /* pass up the "cascaded" attribute. The whole chain is cascaded
-+         * if something is cascaded along the way. */
-+        if (MANIP_IS_CASCADED(p_FmPcdManipParams->h_NextManip))
-+            p_Manip->cascaded = TRUE;
-+    }
-+
-+    /* Allocate new table */
-+    /* calculate table size according to manip parameters */
-+    err = CalculateTableSize(p_FmPcdManipParams, &p_Manip->tableSize,
-+                             &p_Manip->dataSize);
-+    if (err)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    totalSize = (uint16_t)(p_Manip->tableSize + p_Manip->dataSize + nextSize);
-+
-+    p_Manip->p_Hmct = (uint8_t*)FM_MURAM_AllocMem(
-+            ((t_FmPcd *)p_Manip->h_FmPcd)->h_FmMuram, totalSize, 4);
-+    if (!p_Manip->p_Hmct)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MURAM alloc failed"));
-+
-+    if (p_Manip->dataSize)
-+        p_Manip->p_Data =
-+                (uint8_t*)PTR_MOVE(p_Manip->p_Hmct, (p_Manip->tableSize + nextSize));
-+
-+    /* update shadow size to allow runtime replacement of Header manipulation */
-+    /* The allocated shadow is divided as follows:
-+     0 . . .       16 . . .
-+     --------------------------------
-+     |   Shadow   |   Shadow HMTD   |
-+     |   HMTD     |   Match Table   |
-+     | (16 bytes) | (maximal size)  |
-+     --------------------------------
-+     */
-+
-+    err = FmPcdUpdateCcShadow(p_Manip->h_FmPcd, (uint32_t)(totalSize + 16),
-+                              (uint16_t)FM_PCD_CC_AD_TABLE_ALIGN);
-+    if (err != E_OK)
-+    {
-+        FM_MURAM_FreeMem(p_Manip->h_FmPcd, p_Manip->p_Hmct);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                     ("MURAM allocation for HdrManip node shadow"));
-+    }
-+
-+    if (p_FmPcdManipParams->h_NextManip
-+            && (p_Manip->nextManipType == e_FM_PCD_MANIP_HDR)
-+            && (MANIP_DONT_REPARSE(p_Manip)))
-+    {
-+        p_OldHmct = (uint8_t *)GetManipInfo(p_FmPcdManipParams->h_NextManip,
-+                                            e_MANIP_HMCT);
-+        p_CurManip = p_FmPcdManipParams->h_NextManip;
-+        /* Run till the last Manip (which is the first to configure) */
-+        while (MANIP_IS_UNIFIED_NON_LAST(p_CurManip))
-+            p_CurManip = p_CurManip->h_NextManip;
-+
-+        while (p_CurManip)
-+        {
-+            /* If this is a unified table, point to the part of the table
-+             * which is the relative offset in HMCT.
-+             */
-+            p_TmpHmctPtr = (uint8_t*)PTR_MOVE(p_Manip->p_Hmct,
-+                    (p_Manip->tableSize +
-+                            (PTR_TO_UINT(p_CurManip->p_Hmct) -
-+                                    PTR_TO_UINT(p_OldHmct))));
-+            if (p_CurManip->p_Data)
-+                p_TmpDataPtr = (uint8_t*)PTR_MOVE(p_Manip->p_Hmct,
-+                        (p_Manip->tableSize +
-+                                (PTR_TO_UINT(p_CurManip->p_Data) -
-+                                        PTR_TO_UINT(p_OldHmct))));
-+            else
-+                p_TmpDataPtr = NULL;
-+
-+            BuildHmct(p_CurManip, &p_CurManip->manipParams, p_TmpHmctPtr,
-+                      p_TmpDataPtr, FALSE);
-+            /* update old manip table pointer */
-+            MANIP_SET_HMCT_PTR(p_CurManip, p_TmpHmctPtr);
-+            MANIP_SET_DATA_PTR(p_CurManip, p_TmpDataPtr);
-+
-+            p_CurManip = p_CurManip->h_PrevManip;
-+        }
-+        /* We copied the HMCT to create a new large HMCT so we can free the old one */
-+        FM_MURAM_FreeMem(MANIP_GET_MURAM(p_FmPcdManipParams->h_NextManip),
-+                         p_OldHmct);
-+    }
-+
-+    /* Fill table */
-+    err = BuildHmct(p_Manip, p_FmPcdManipParams, p_Manip->p_Hmct,
-+                    p_Manip->p_Data, TRUE);
-+    if (err)
-+    {
-+        FM_MURAM_FreeMem(p_Manip->h_FmPcd, p_Manip->p_Hmct);
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+
-+    /* Build HMTD (table descriptor) */
-+     tmpReg = HMTD_CFG_TYPE; /* NADEN = 0 */
-+
-+     /* add parseAfterManip */
-+      if (!p_Manip->dontParseAfterManip)
-+          tmpReg |= HMTD_CFG_PRS_AFTER_HM;
-+
-+    /* create cascade */
-+    /*if (p_FmPcdManipParams->h_NextManip
-+            && (!MANIP_DONT_REPARSE(p_Manip) || (p_Manip->nextManipType != e_FM_PCD_MANIP_HDR)))*/
-+    if (p_Manip->cascaded)
-+    {
-+        uint16_t nextAd;
-+        /* indicate that there's another HM table descriptor */
-+        tmpReg |= HMTD_CFG_NEXT_AD_EN;
-+        /* get address of next HMTD (table descriptor; h_Ad).
-+         * If the next HMTD was removed due to table unifing, get the address
-+         * of the "next next" as written in the h_Ad of the next h_Manip node.
-+         */
-+        if (p_Manip->unifiedPosition != e_MANIP_UNIFIED_FIRST)
-+            nextAd = (uint16_t)((uint32_t)(XX_VirtToPhys(MANIP_GET_HMTD_PTR(p_FmPcdManipParams->h_NextManip)) - (((t_FmPcd*)p_Manip->h_FmPcd)->physicalMuramBase)) >> 4);
-+        else
-+            nextAd = ((t_Hmtd *)((t_FmPcdManip *)p_FmPcdManipParams->h_NextManip)->h_Ad)->nextAdIdx;
-+
-+        WRITE_UINT16(((t_Hmtd *)p_Manip->h_Ad)->nextAdIdx, nextAd);
-+    }
-+
-+    WRITE_UINT16(((t_Hmtd *)p_Manip->h_Ad)->cfg, tmpReg);
-+    WRITE_UINT32(
-+            ((t_Hmtd *)p_Manip->h_Ad)->hmcdBasePtr,
-+            (uint32_t)(XX_VirtToPhys(p_Manip->p_Hmct) - (((t_FmPcd*)p_Manip->h_FmPcd)->physicalMuramBase)));
-+
-+    WRITE_UINT8(((t_Hmtd *)p_Manip->h_Ad)->opCode, HMAN_OC);
-+
-+    if (p_Manip->unifiedPosition == e_MANIP_UNIFIED_FIRST)
-+    {
-+        /* The HMTD of the next Manip is never going to be used */
-+        if (((t_FmPcdManip *)p_FmPcdManipParams->h_NextManip)->muramAllocate)
-+            FM_MURAM_FreeMem(
-+                    ((t_FmPcd *)((t_FmPcdManip *)p_FmPcdManipParams->h_NextManip)->h_FmPcd)->h_FmMuram,
-+                    ((t_FmPcdManip *)p_FmPcdManipParams->h_NextManip)->h_Ad);
-+        else
-+            XX_Free(((t_FmPcdManip *)p_FmPcdManipParams->h_NextManip)->h_Ad);
-+        ((t_FmPcdManip *)p_FmPcdManipParams->h_NextManip)->h_Ad = NULL;
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error CreateManipActionShadow(t_FmPcdManip *p_Manip,
-+                                       t_FmPcdManipParams *p_FmPcdManipParams)
-+{
-+    uint8_t *p_WholeHmct, *p_TmpHmctPtr, newDataSize, *p_TmpDataPtr = NULL;
-+    uint16_t newSize;
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)p_Manip->h_FmPcd;
-+    t_Error err;
-+    t_FmPcdManip *p_CurManip = p_Manip;
-+
-+    err = CalculateTableSize(p_FmPcdManipParams, &newSize, &newDataSize);
-+    if (err)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    /* check coherency of new table parameters */
-+    if (newSize > p_Manip->tableSize)
-+        RETURN_ERROR(
-+                MINOR,
-+                E_INVALID_VALUE,
-+                ("New Hdr Manip configuration requires larger size than current one (command table)."));
-+    if (newDataSize > p_Manip->dataSize)
-+        RETURN_ERROR(
-+                MINOR,
-+                E_INVALID_VALUE,
-+                ("New Hdr Manip configuration requires larger size than current one (data)."));
-+    if (p_FmPcdManipParams->h_NextManip)
-+        RETURN_ERROR(
-+                MINOR, E_INVALID_VALUE,
-+                ("New Hdr Manip configuration can not contain h_NextManip."));
-+    if (MANIP_IS_UNIFIED(p_Manip) && (newSize != p_Manip->tableSize))
-+        RETURN_ERROR(
-+                MINOR,
-+                E_INVALID_VALUE,
-+                ("New Hdr Manip configuration in a chained manipulation requires different size than current one."));
-+    if (p_Manip->dontParseAfterManip
-+            != p_FmPcdManipParams->u.hdr.dontParseAfterManip)
-+        RETURN_ERROR(
-+                MINOR,
-+                E_INVALID_VALUE,
-+                ("New Hdr Manip configuration differs in dontParseAfterManip value."));
-+
-+    p_Manip->tableSize = newSize;
-+    p_Manip->dataSize = newDataSize;
-+
-+    /* Build the new table in the shadow */
-+    if (!MANIP_IS_UNIFIED(p_Manip))
-+    {
-+        p_TmpHmctPtr = (uint8_t*)PTR_MOVE(p_FmPcd->p_CcShadow, 16);
-+        if (p_Manip->p_Data)
-+            p_TmpDataPtr =
-+                    (uint8_t*)PTR_MOVE(p_TmpHmctPtr,
-+                            (PTR_TO_UINT(p_Manip->p_Data) - PTR_TO_UINT(p_Manip->p_Hmct)));
-+
-+        BuildHmct(p_Manip, p_FmPcdManipParams, p_TmpHmctPtr, p_Manip->p_Data,
-+                  FALSE);
-+    }
-+    else
-+    {
-+        p_WholeHmct = (uint8_t *)GetManipInfo(p_Manip, e_MANIP_HMCT);
-+        ASSERT_COND(p_WholeHmct);
-+
-+        /* Run till the last Manip (which is the first to configure) */
-+        while (MANIP_IS_UNIFIED_NON_LAST(p_CurManip))
-+            p_CurManip = p_CurManip->h_NextManip;
-+
-+        while (p_CurManip)
-+        {
-+            /* If this is a non-head node in a unified table, point to the part of the shadow
-+             * which is the relative offset in HMCT.
-+             * else, point to the beginning of the
-+             * shadow table (we save 16 for the HMTD.
-+             */
-+            p_TmpHmctPtr =
-+                    (uint8_t*)PTR_MOVE(p_FmPcd->p_CcShadow,
-+                            (16 + PTR_TO_UINT(p_CurManip->p_Hmct) - PTR_TO_UINT(p_WholeHmct)));
-+            if (p_CurManip->p_Data)
-+                p_TmpDataPtr =
-+                        (uint8_t*)PTR_MOVE(p_FmPcd->p_CcShadow,
-+                                (16 + PTR_TO_UINT(p_CurManip->p_Data) - PTR_TO_UINT(p_WholeHmct)));
-+
-+            BuildHmct(p_CurManip, &p_CurManip->manipParams, p_TmpHmctPtr,
-+                      p_TmpDataPtr, FALSE);
-+            p_CurManip = p_CurManip->h_PrevManip;
-+        }
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error CreateManipActionBackToOrig(
-+        t_FmPcdManip *p_Manip, t_FmPcdManipParams *p_FmPcdManipParams)
-+{
-+    uint8_t *p_WholeHmct = NULL, *p_TmpHmctPtr, *p_TmpDataPtr;
-+    t_FmPcdManip *p_CurManip = p_Manip;
-+
-+    /* Build the new table in the shadow */
-+    if (!MANIP_IS_UNIFIED(p_Manip))
-+        BuildHmct(p_Manip, p_FmPcdManipParams, p_Manip->p_Hmct, p_Manip->p_Data,
-+                  FALSE);
-+    else
-+    {
-+        p_WholeHmct = (uint8_t *)GetManipInfo(p_Manip, e_MANIP_HMCT);
-+        ASSERT_COND(p_WholeHmct);
-+
-+        /* Run till the last Manip (which is the first to configure) */
-+        while (MANIP_IS_UNIFIED_NON_LAST(p_CurManip))
-+            p_CurManip = p_CurManip->h_NextManip;
-+
-+        while (p_CurManip)
-+        {
-+            /* If this is a unified table, point to the part of the table
-+             * which is the relative offset in HMCT.
-+             */
-+            p_TmpHmctPtr = p_CurManip->p_Hmct; /*- (uint32_t)p_WholeHmct*/
-+            p_TmpDataPtr = p_CurManip->p_Data; /*- (uint32_t)p_WholeHmct*/
-+
-+            BuildHmct(p_CurManip, &p_CurManip->manipParams, p_TmpHmctPtr,
-+                      p_TmpDataPtr, FALSE);
-+
-+            p_CurManip = p_CurManip->h_PrevManip;
-+        }
-+    }
-+
-+    return E_OK;
-+}
-+
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+static t_Error UpdateManipIc(t_Handle h_Manip, uint8_t icOffset)
-+{
-+    t_FmPcdManip *p_Manip = (t_FmPcdManip *)h_Manip;
-+    t_Handle p_Ad;
-+    uint32_t tmpReg32 = 0;
-+    SANITY_CHECK_RETURN_ERROR(h_Manip, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->h_Ad, E_INVALID_HANDLE);
-+
-+    switch (p_Manip->opcode)
-+    {
-+        case (HMAN_OC_MV_INT_FRAME_HDR_FROM_FRM_TO_BUFFER_PREFFIX):
-+        p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Ad;
-+        if (p_Manip->updateParams & INTERNAL_CONTEXT_OFFSET)
-+        {
-+            tmpReg32 =
-+            *(uint32_t *)&((t_AdOfTypeContLookup *)p_Ad)->pcAndOffsets;
-+            tmpReg32 |= (uint32_t)((uint32_t)icOffset << 16);
-+            *(uint32_t *)&((t_AdOfTypeContLookup *)p_Ad)->pcAndOffsets =
-+            tmpReg32;
-+            p_Manip->updateParams &= ~INTERNAL_CONTEXT_OFFSET;
-+            p_Manip->icOffset = icOffset;
-+        }
-+        else
-+        {
-+            if (p_Manip->icOffset != icOffset)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("this manipulation was updated previously by different value"););
-+        }
-+        break;
-+        case (HMAN_OC_CAPWAP_RMV_DTLS_IF_EXIST):
-+        if (p_Manip->h_Frag)
-+        {
-+            if (p_Manip->updateParams & INTERNAL_CONTEXT_OFFSET)
-+            {
-+                p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Ad;
-+                tmpReg32 |= GET_UINT32(((t_AdOfTypeContLookup *)p_Ad)->pcAndOffsets);
-+                tmpReg32 |= (uint32_t)((uint32_t)icOffset << 16);
-+                WRITE_UINT32(((t_AdOfTypeContLookup *)p_Ad)->pcAndOffsets, tmpReg32);
-+                p_Manip->updateParams &= ~INTERNAL_CONTEXT_OFFSET;
-+                p_Manip->icOffset = icOffset;
-+            }
-+            else
-+            {
-+                if (p_Manip->icOffset != icOffset)
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("this manipulation was updated previousely by different value"););
-+            }
-+        }
-+        break;
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error UpdateInitMvIntFrameHeaderFromFrameToBufferPrefix(
-+        t_Handle h_FmPort, t_FmPcdManip *p_Manip, t_Handle h_Ad, bool validate)
-+{
-+
-+    t_AdOfTypeContLookup *p_Ad = (t_AdOfTypeContLookup *)h_Ad;
-+    t_FmPortGetSetCcParams fmPortGetSetCcParams;
-+    t_Error err;
-+    uint32_t tmpReg32;
-+
-+    memset(&fmPortGetSetCcParams, 0, sizeof(t_FmPortGetSetCcParams));
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(
-+            (p_Manip->opcode & HMAN_OC_MV_INT_FRAME_HDR_FROM_FRM_TO_BUFFER_PREFFIX),
-+            E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Manip->muramAllocate, E_INVALID_STATE);
-+
-+    if (p_Manip->updateParams)
-+    {
-+        if ((!(p_Manip->updateParams & OFFSET_OF_PR))
-+                || (p_Manip->shadowUpdateParams & OFFSET_OF_PR))
-+        RETURN_ERROR(
-+                MAJOR, E_INVALID_STATE,
-+                ("in this stage parameters from Port has not be updated"));
-+
-+        fmPortGetSetCcParams.getCcParams.type = p_Manip->updateParams;
-+        fmPortGetSetCcParams.setCcParams.type = UPDATE_PSO;
-+        fmPortGetSetCcParams.setCcParams.psoSize = 16;
-+
-+        err = FmPortGetSetCcParams(h_FmPort, &fmPortGetSetCcParams);
-+        if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+        if (fmPortGetSetCcParams.getCcParams.type & OFFSET_OF_PR)
-+        RETURN_ERROR(
-+                MAJOR, E_INVALID_STATE,
-+                ("Parser result offset wasn't configured previousely"));
-+#ifdef FM_LOCKUP_ALIGNMENT_ERRATA_FMAN_SW004
-+        ASSERT_COND(!(fmPortGetSetCcParams.getCcParams.prOffset % 16));
-+#endif
-+    }
-+    else
-+    if (validate)
-+    {
-+        if ((!(p_Manip->shadowUpdateParams & OFFSET_OF_PR))
-+                || (p_Manip->updateParams & OFFSET_OF_PR))
-+        RETURN_ERROR(
-+                MAJOR, E_INVALID_STATE,
-+                ("in this stage parameters from Port has be updated"));
-+        fmPortGetSetCcParams.getCcParams.type = p_Manip->shadowUpdateParams;
-+        fmPortGetSetCcParams.setCcParams.type = UPDATE_PSO;
-+        fmPortGetSetCcParams.setCcParams.psoSize = 16;
-+
-+        err = FmPortGetSetCcParams(h_FmPort, &fmPortGetSetCcParams);
-+        if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+        if (fmPortGetSetCcParams.getCcParams.type & OFFSET_OF_PR)
-+        RETURN_ERROR(
-+                MAJOR, E_INVALID_STATE,
-+                ("Parser result offset wasn't configured previousely"));
-+
-+    }
-+
-+    ASSERT_COND(p_Ad);
-+
-+    if (p_Manip->updateParams & OFFSET_OF_PR)
-+    {
-+        tmpReg32 = 0;
-+        tmpReg32 |= fmPortGetSetCcParams.getCcParams.prOffset;
-+        WRITE_UINT32(p_Ad->matchTblPtr,
-+                (GET_UINT32(p_Ad->matchTblPtr) | tmpReg32));
-+        p_Manip->updateParams &= ~OFFSET_OF_PR;
-+        p_Manip->shadowUpdateParams |= OFFSET_OF_PR;
-+    }
-+    else
-+    if (validate)
-+    {
-+        tmpReg32 = GET_UINT32(p_Ad->matchTblPtr);
-+        if ((uint8_t)tmpReg32 != fmPortGetSetCcParams.getCcParams.prOffset)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_STATE,
-+                ("this manipulation was updated previousely by different value"););
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error UpdateModifyCapwapFragmenation(t_FmPcdManip *p_Manip, t_Handle h_Ad, bool validate,t_Handle h_FmTree)
-+{
-+    t_AdOfTypeContLookup *p_Ad = (t_AdOfTypeContLookup *)h_Ad;
-+    t_FmPcdCcSavedManipParams *p_SavedManipParams = NULL;
-+    uint32_t tmpReg32 = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip,E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->h_Frag,E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->frag,E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(((p_Manip->opcode == HMAN_OC_CAPWAP_FRAGMENTATION) || (p_Manip->opcode == HMAN_OC_INSRT_HDR_BY_TEMPL_N_OR_FRAG_AFTER)), E_INVALID_STATE);
-+
-+    p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Frag;
-+
-+    if (p_Manip->updateParams)
-+    {
-+
-+        if ((!(p_Manip->updateParams & OFFSET_OF_DATA)) ||
-+                ((p_Manip->shadowUpdateParams & OFFSET_OF_DATA)))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("in this stage parameters from Port has not be updated"));
-+        p_SavedManipParams = FmPcdCcTreeGetSavedManipParams(h_FmTree);
-+        if (!p_SavedManipParams)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("for this manipulation tree has to be configured previosely with this type"));
-+        p_Manip->capwapFragParams.dataOffset = p_SavedManipParams->capwapParams.dataOffset;
-+
-+        tmpReg32 = GET_UINT32(p_Ad->pcAndOffsets);
-+        tmpReg32 |= ((uint32_t)p_Manip->capwapFragParams.dataOffset<< 16);
-+        WRITE_UINT32(p_Ad->pcAndOffsets,tmpReg32);
-+
-+        p_Manip->updateParams &= ~OFFSET_OF_DATA;
-+        p_Manip->shadowUpdateParams |= OFFSET_OF_DATA;
-+    }
-+    else if (validate)
-+    {
-+
-+        p_SavedManipParams = FmPcdCcTreeGetSavedManipParams(h_FmTree);
-+        if (!p_SavedManipParams)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("for this manipulation tree has to be configured previosely with this type"));
-+        if (p_Manip->capwapFragParams.dataOffset != p_SavedManipParams->capwapParams.dataOffset)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("this manipulation was updated previousely by different value"));
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error UpdateInitCapwapFragmentation(t_Handle h_FmPort,
-+        t_FmPcdManip *p_Manip,
-+        t_Handle h_Ad,
-+        bool validate,
-+        t_Handle h_FmTree)
-+{
-+    t_AdOfTypeContLookup *p_Ad;
-+    t_FmPortGetSetCcParams fmPortGetSetCcParams;
-+    t_Error err;
-+    uint32_t tmpReg32 = 0;
-+    t_FmPcdCcSavedManipParams *p_SavedManipParams;
-+
-+    UNUSED(h_Ad);
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip,E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->h_Frag,E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->frag,E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(((p_Manip->opcode == HMAN_OC_CAPWAP_FRAGMENTATION) ||
-+                    (p_Manip->opcode == HMAN_OC_INSRT_HDR_BY_TEMPL_N_OR_FRAG_AFTER)), E_INVALID_STATE);
-+
-+    p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Frag;
-+
-+    if (p_Manip->updateParams)
-+    {
-+        if ((!(p_Manip->updateParams & OFFSET_OF_DATA)) ||
-+                ((p_Manip->shadowUpdateParams & OFFSET_OF_DATA)))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("in this stage parameters from Port has not be updated"));
-+        fmPortGetSetCcParams.getCcParams.type = p_Manip->updateParams;
-+        fmPortGetSetCcParams.setCcParams.type = UPDATE_NIA_PNEN | UPDATE_FMFP_PRC_WITH_ONE_RISC_ONLY;
-+        fmPortGetSetCcParams.setCcParams.nia = NIA_FM_CTL_AC_POP_TO_N_STEP | NIA_ENG_FM_CTL;
-+        /* For CAPWAP Rassembly used FMAN_CTRL2 hardcoded - so for fragmentation its better to use FMAN_CTRL1 */
-+        fmPortGetSetCcParams.setCcParams.orFmanCtrl = FPM_PORT_FM_CTL1;
-+
-+        err = FmPortGetSetCcParams(h_FmPort, &fmPortGetSetCcParams);
-+        if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+        if (fmPortGetSetCcParams.getCcParams.type & OFFSET_OF_DATA)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Data offset wasn't configured previousely"));
-+
-+        p_SavedManipParams = (t_FmPcdCcSavedManipParams *)XX_Malloc(sizeof(t_FmPcdCcSavedManipParams));
-+        p_SavedManipParams->capwapParams.dataOffset = fmPortGetSetCcParams.getCcParams.dataOffset;
-+
-+#ifdef FM_LOCKUP_ALIGNMENT_ERRATA_FMAN_SW004
-+        ASSERT_COND(!(p_SavedManipParams->capwapParams.dataOffset % 16));
-+#endif /* FM_LOCKUP_ALIGNMENT_ERRATA_FMAN_SW004 */
-+
-+        FmPcdCcTreeSetSavedManipParams(h_FmTree, (t_Handle)p_SavedManipParams);
-+    }
-+    else if (validate)
-+    {
-+        if ((!(p_Manip->shadowUpdateParams & OFFSET_OF_DATA)) ||
-+                ((p_Manip->updateParams & OFFSET_OF_DATA)))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("in this stage parameters from Port has be updated"));
-+        fmPortGetSetCcParams.getCcParams.type = p_Manip->shadowUpdateParams;
-+        fmPortGetSetCcParams.setCcParams.type = UPDATE_NIA_PNEN | UPDATE_FMFP_PRC_WITH_ONE_RISC_ONLY;
-+        fmPortGetSetCcParams.setCcParams.nia = NIA_FM_CTL_AC_POP_TO_N_STEP | NIA_ENG_FM_CTL;
-+        err = FmPortGetSetCcParams(h_FmPort, &fmPortGetSetCcParams);
-+        if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+        if (fmPortGetSetCcParams.getCcParams.type & OFFSET_OF_DATA)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Data offset wasn't configured previousely"));
-+    }
-+
-+    if (p_Manip->updateParams)
-+    {
-+        tmpReg32 = GET_UINT32(p_Ad->pcAndOffsets);
-+        tmpReg32 |= ((uint32_t)fmPortGetSetCcParams.getCcParams.dataOffset<< 16);
-+        WRITE_UINT32(p_Ad->pcAndOffsets,tmpReg32);
-+
-+        p_Manip->updateParams &= ~OFFSET_OF_DATA;
-+        p_Manip->shadowUpdateParams |= OFFSET_OF_DATA;
-+        p_Manip->capwapFragParams.dataOffset = fmPortGetSetCcParams.getCcParams.dataOffset;
-+    }
-+    else if (validate)
-+    {
-+        if (p_Manip->capwapFragParams.dataOffset != fmPortGetSetCcParams.getCcParams.dataOffset)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("this manipulation was updated previousely by different value"));
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error UpdateInitCapwapReasm(t_Handle h_FmPcd,
-+        t_Handle h_FmPort,
-+        t_FmPcdManip *p_Manip,
-+        t_Handle h_Ad,
-+        bool validate)
-+{
-+    t_CapwapReasmPram *p_ReassmTbl;
-+    t_Error err;
-+    t_FmPortGetSetCcParams fmPortGetSetCcParams;
-+    uint8_t i = 0;
-+    uint16_t size;
-+    uint32_t tmpReg32;
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    t_FmPcdCcCapwapReassmTimeoutParams ccCapwapReassmTimeoutParams;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip,E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->h_Frag,E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Manip->frag,E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Manip->opcode == HMAN_OC_CAPWAP_RMV_DTLS_IF_EXIST), E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcd,E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->h_Hc,E_INVALID_HANDLE);
-+
-+    if (p_Manip->h_FmPcd != h_FmPcd)
-+    RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+            ("handler of PCD previously was initiated by different value"));
-+
-+    UNUSED(h_Ad);
-+
-+    memset(&fmPortGetSetCcParams, 0, sizeof(t_FmPortGetSetCcParams));
-+    p_ReassmTbl = (t_CapwapReasmPram *)p_Manip->h_Frag;
-+
-+    if (p_Manip->updateParams)
-+    {
-+        if ((!(p_Manip->updateParams & NUM_OF_TASKS) &&
-+                        !(p_Manip->updateParams & OFFSET_OF_DATA) &&
-+                        !(p_Manip->updateParams & OFFSET_OF_PR) &&
-+                        !(p_Manip->updateParams & HW_PORT_ID)) ||
-+                ((p_Manip->shadowUpdateParams & NUM_OF_TASKS) ||
-+                        (p_Manip->shadowUpdateParams & OFFSET_OF_DATA) || (p_Manip->shadowUpdateParams & OFFSET_OF_PR) ||
-+                        (p_Manip->shadowUpdateParams & HW_PORT_ID)))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("in this stage parameters from Port has not be updated"));
-+
-+        fmPortGetSetCcParams.getCcParams.type = p_Manip->updateParams;
-+        fmPortGetSetCcParams.setCcParams.type = UPDATE_NIA_PNEN;
-+        fmPortGetSetCcParams.setCcParams.nia = NIA_FM_CTL_AC_POP_TO_N_STEP | NIA_ENG_FM_CTL;
-+
-+        err = FmPortGetSetCcParams(h_FmPort, &fmPortGetSetCcParams);
-+        if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+        if (fmPortGetSetCcParams.getCcParams.type & NUM_OF_TASKS)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Num of tasks wasn't configured previousely"));
-+        if (fmPortGetSetCcParams.getCcParams.type & OFFSET_OF_DATA)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("offset of the data  wasn't configured previousely"));
-+        if (fmPortGetSetCcParams.getCcParams.type & HW_PORT_ID)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("hwPortId wasn't updated"));
-+#ifdef FM_LOCKUP_ALIGNMENT_ERRATA_FMAN_SW004
-+        ASSERT_COND((fmPortGetSetCcParams.getCcParams.dataOffset % 16) == 0);
-+#endif /* FM_LOCKUP_ALIGNMENT_ERRATA_FMAN_SW004 */
-+    }
-+    else if (validate)
-+    {
-+        if ((!(p_Manip->shadowUpdateParams & NUM_OF_TASKS) &&
-+                        !(p_Manip->shadowUpdateParams & OFFSET_OF_DATA) &&
-+                        !(p_Manip->shadowUpdateParams & OFFSET_OF_PR) &&
-+                        !(p_Manip->shadowUpdateParams & HW_PORT_ID)) &&
-+                ((p_Manip->updateParams & NUM_OF_TASKS) ||
-+                        (p_Manip->updateParams & OFFSET_OF_DATA) || (p_Manip->updateParams & OFFSET_OF_PR) ||
-+                        (p_Manip->updateParams & HW_PORT_ID)))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("in this stage parameters from Port has be updated"));
-+
-+        fmPortGetSetCcParams.getCcParams.type = p_Manip->shadowUpdateParams;
-+        fmPortGetSetCcParams.setCcParams.type = UPDATE_NIA_PNEN;
-+        fmPortGetSetCcParams.setCcParams.nia = NIA_FM_CTL_AC_POP_TO_N_STEP | NIA_ENG_FM_CTL;
-+
-+        err = FmPortGetSetCcParams(h_FmPort, &fmPortGetSetCcParams);
-+        if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+        if (fmPortGetSetCcParams.getCcParams.type & NUM_OF_TASKS)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("NumOfTasks wasn't configured previously"));
-+        if (fmPortGetSetCcParams.getCcParams.type & OFFSET_OF_DATA)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("offset of the data  wasn't configured previously"));
-+        if (fmPortGetSetCcParams.getCcParams.type & HW_PORT_ID)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("hwPortId wasn't updated"));
-+    }
-+
-+    if (p_Manip->updateParams)
-+    {
-+        if (p_Manip->updateParams & NUM_OF_TASKS)
-+        {
-+            /*recommendation of Microcode team - (maxNumFramesInProcess * 2) */
-+            size = (uint16_t)(p_Manip->capwapFragParams.maxNumFramesInProcess*2 + fmPortGetSetCcParams.getCcParams.numOfTasks);
-+            if (size > 255)
-+            RETURN_ERROR(MAJOR,E_INVALID_VALUE, ("numOfOpenReassmEntries + numOfTasks per port can not be greater than 256"));
-+
-+            p_Manip->capwapFragParams.numOfTasks = fmPortGetSetCcParams.getCcParams.numOfTasks;
-+
-+            /*p_ReassmFrmDescrIndxPoolTbl*/
-+            p_Manip->capwapFragParams.p_ReassmFrmDescrIndxPoolTbl =
-+            (t_Handle)FM_MURAM_AllocMem(p_FmPcd->h_FmMuram,
-+                    (uint32_t)(size + 1),
-+                    4);
-+            if (!p_Manip->capwapFragParams.p_ReassmFrmDescrIndxPoolTbl)
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MURAM alloc for CAPWAP Reassembly frame buffer index pool table"));
-+
-+            MemSet8(p_Manip->capwapFragParams.p_ReassmFrmDescrIndxPoolTbl, 0, (uint32_t)(size + 1));
-+
-+            for ( i = 0; i < size; i++)
-+            WRITE_UINT8(*(uint8_t *)PTR_MOVE(p_Manip->capwapFragParams.p_ReassmFrmDescrIndxPoolTbl, i), (uint8_t)(i+1));
-+
-+            tmpReg32 = (uint32_t)(XX_VirtToPhys(p_Manip->capwapFragParams.p_ReassmFrmDescrIndxPoolTbl) - p_FmPcd->physicalMuramBase);
-+
-+            WRITE_UINT32(p_ReassmTbl->reasmFrmDescIndexPoolTblPtr, tmpReg32);
-+
-+            /*p_ReassmFrmDescrPoolTbl*/
-+            p_Manip->capwapFragParams.p_ReassmFrmDescrPoolTbl =
-+            (t_Handle)FM_MURAM_AllocMem(p_FmPcd->h_FmMuram,
-+                    (uint32_t)((size + 1) * FM_PCD_MANIP_CAPWAP_REASM_RFD_SIZE),
-+                    4);
-+
-+            if (!p_Manip->capwapFragParams.p_ReassmFrmDescrPoolTbl)
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MURAM alloc for CAPWAP Reassembly frame buffer pool table"));
-+
-+            MemSet8(p_Manip->capwapFragParams.p_ReassmFrmDescrPoolTbl, 0, (uint32_t)((size +1)* FM_PCD_MANIP_CAPWAP_REASM_RFD_SIZE));
-+
-+            tmpReg32 = (uint32_t)(XX_VirtToPhys(p_Manip->capwapFragParams.p_ReassmFrmDescrPoolTbl) - p_FmPcd->physicalMuramBase);
-+
-+            WRITE_UINT32(p_ReassmTbl->reasmFrmDescPoolTblPtr, tmpReg32);
-+
-+            /*p_TimeOutTbl*/
-+
-+            p_Manip->capwapFragParams.p_TimeOutTbl =
-+            (t_Handle)FM_MURAM_AllocMem(p_FmPcd->h_FmMuram,
-+                    (uint32_t)((size + 1)* FM_PCD_MANIP_CAPWAP_REASM_TIME_OUT_ENTRY_SIZE),
-+                    4);
-+
-+            if (!p_Manip->capwapFragParams.p_TimeOutTbl)
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MURAM alloc for CAPWAP Reassembly timeout table"));
-+
-+            MemSet8(p_Manip->capwapFragParams.p_TimeOutTbl, 0, (uint16_t)((size + 1)*FM_PCD_MANIP_CAPWAP_REASM_TIME_OUT_ENTRY_SIZE));
-+
-+            tmpReg32 = (uint32_t)(XX_VirtToPhys(p_Manip->capwapFragParams.p_TimeOutTbl) - p_FmPcd->physicalMuramBase);
-+            WRITE_UINT32(p_ReassmTbl->timeOutTblPtr, tmpReg32);
-+
-+            p_Manip->updateParams &= ~NUM_OF_TASKS;
-+            p_Manip->shadowUpdateParams |= NUM_OF_TASKS;
-+        }
-+
-+        if (p_Manip->updateParams & OFFSET_OF_DATA)
-+        {
-+            p_Manip->capwapFragParams.dataOffset = fmPortGetSetCcParams.getCcParams.dataOffset;
-+            tmpReg32 = GET_UINT32(p_ReassmTbl->mode);
-+            tmpReg32|= p_Manip->capwapFragParams.dataOffset;
-+            WRITE_UINT32(p_ReassmTbl->mode, tmpReg32);
-+            p_Manip->updateParams &= ~OFFSET_OF_DATA;
-+            p_Manip->shadowUpdateParams |= OFFSET_OF_DATA;
-+        }
-+
-+        if (!(fmPortGetSetCcParams.getCcParams.type & OFFSET_OF_PR))
-+        {
-+            p_Manip->capwapFragParams.prOffset = fmPortGetSetCcParams.getCcParams.prOffset;
-+
-+            tmpReg32 = GET_UINT32(p_ReassmTbl->mode);
-+            tmpReg32|= FM_PCD_MANIP_CAPWAP_REASM_PR_COPY;
-+            WRITE_UINT32(p_ReassmTbl->mode, tmpReg32);
-+
-+            tmpReg32 = GET_UINT32(p_ReassmTbl->intStatsTblPtr);
-+            tmpReg32 |= (uint32_t)p_Manip->capwapFragParams.prOffset << 24;
-+            WRITE_UINT32(p_ReassmTbl->intStatsTblPtr, tmpReg32);
-+            p_Manip->updateParams &= ~OFFSET_OF_PR;
-+            p_Manip->shadowUpdateParams |= OFFSET_OF_PR;
-+        }
-+        else
-+        {
-+            p_Manip->capwapFragParams.prOffset = 0xff;
-+            p_Manip->updateParams &= ~OFFSET_OF_PR;
-+            p_Manip->shadowUpdateParams |= OFFSET_OF_PR;
-+        }
-+
-+        p_Manip->capwapFragParams.hwPortId = fmPortGetSetCcParams.getCcParams.hardwarePortId;
-+        p_Manip->updateParams &= ~HW_PORT_ID;
-+        p_Manip->shadowUpdateParams |= HW_PORT_ID;
-+
-+        /*timeout hc */
-+        ccCapwapReassmTimeoutParams.fqidForTimeOutFrames = p_Manip->capwapFragParams.fqidForTimeOutFrames;
-+        ccCapwapReassmTimeoutParams.portIdAndCapwapReassmTbl = (uint32_t)p_Manip->capwapFragParams.hwPortId << 24;
-+        ccCapwapReassmTimeoutParams.portIdAndCapwapReassmTbl |= (uint32_t)((XX_VirtToPhys(p_ReassmTbl) - p_FmPcd->physicalMuramBase));
-+        ccCapwapReassmTimeoutParams.timeoutRequestTime = (((uint32_t)1<<p_Manip->capwapFragParams.bitFor1Micro) * p_Manip->capwapFragParams.timeoutRoutineRequestTime)/2;
-+        return FmHcPcdCcCapwapTimeoutReassm(p_FmPcd->h_Hc,&ccCapwapReassmTimeoutParams);
-+    }
-+
-+    else if (validate)
-+    {
-+        if (fmPortGetSetCcParams.getCcParams.hardwarePortId != p_Manip->capwapFragParams.hwPortId)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Reassembly manipulation previously was assigned to another port"));
-+        if (fmPortGetSetCcParams.getCcParams.numOfTasks != p_Manip->capwapFragParams.numOfTasks)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("numOfTasks for this manipulation previously was defined by another value "));
-+
-+        if (!(fmPortGetSetCcParams.getCcParams.type & OFFSET_OF_PR))
-+        {
-+            if (p_Manip->capwapFragParams.prOffset != fmPortGetSetCcParams.getCcParams.prOffset)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Parse result offset previously was defined by another value "));
-+        }
-+        else
-+        {
-+            if (p_Manip->capwapFragParams.prOffset != 0xff)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Parse result offset previously was defined by another value "));
-+        }
-+        if (fmPortGetSetCcParams.getCcParams.dataOffset != p_Manip->capwapFragParams.dataOffset)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Data offset previously was defined by another value "));
-+    }
-+
-+    return E_OK;
-+}
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+
-+t_Error FmPcdRegisterReassmPort(t_Handle h_FmPcd, t_Handle h_ReasmCommonPramTbl)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    t_FmPcdCcReassmTimeoutParams ccReassmTimeoutParams = { 0 };
-+    t_Error err = E_OK;
-+    uint8_t result;
-+    uint32_t bitFor1Micro, tsbs, log2num;
-+
-+    ASSERT_COND(p_FmPcd);
-+    ASSERT_COND(h_ReasmCommonPramTbl);
-+
-+    bitFor1Micro = FmGetTimeStampScale(p_FmPcd->h_Fm);
-+    if (bitFor1Micro == 0)
-+        RETURN_ERROR(MAJOR, E_NOT_AVAILABLE, ("Timestamp scale"));
-+
-+    bitFor1Micro = 32 - bitFor1Micro;
-+    LOG2(FM_PCD_MANIP_REASM_TIMEOUT_THREAD_THRESH, log2num);
-+    tsbs = bitFor1Micro - log2num;
-+
-+    ccReassmTimeoutParams.iprcpt = (uint32_t)(XX_VirtToPhys(
-+            h_ReasmCommonPramTbl) - p_FmPcd->physicalMuramBase);
-+    ccReassmTimeoutParams.tsbs = (uint8_t)tsbs;
-+    ccReassmTimeoutParams.activate = TRUE;
-+    if ((err = FmHcPcdCcTimeoutReassm(p_FmPcd->h_Hc, &ccReassmTimeoutParams,
-+                                      &result)) != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    switch (result)
-+    {
-+        case (0):
-+            return E_OK;
-+        case (1):
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, ("failed to allocate TNUM"));
-+        case (2):
-+            RETURN_ERROR(
-+                    MAJOR, E_NO_MEMORY,
-+                    ("failed to allocate internal buffer from the HC-Port"));
-+        case (3):
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                         ("'Disable Timeout Task' with invalid IPRCPT"));
-+        case (4):
-+            RETURN_ERROR(MAJOR, E_FULL, ("too many timeout tasks"));
-+        case (5):
-+            RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("invalid sub command"));
-+        default:
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, NO_MSG);
-+    }
-+    return E_OK;
-+}
-+
-+static t_Error CreateReassCommonTable(t_FmPcdManip *p_Manip)
-+{
-+    uint32_t tmpReg32 = 0, i, bitFor1Micro;
-+    uint64_t tmpReg64, size;
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)p_Manip->h_FmPcd;
-+    t_Error err = E_OK;
-+
-+    bitFor1Micro = FmGetTimeStampScale(p_FmPcd->h_Fm);
-+    if (bitFor1Micro == 0)
-+        RETURN_ERROR(MAJOR, E_NOT_AVAILABLE, ("Timestamp scale"));
-+
-+    /* Allocation of the Reassembly Common Parameters table. This table is located in the
-+     MURAM. Its size is 64 bytes and its base address should be 8-byte aligned. */
-+    p_Manip->reassmParams.p_ReassCommonTbl =
-+            (t_ReassCommonTbl *)FM_MURAM_AllocMem(
-+                    p_FmPcd->h_FmMuram,
-+                    FM_PCD_MANIP_REASM_COMMON_PARAM_TABLE_SIZE,
-+                    FM_PCD_MANIP_REASM_COMMON_PARAM_TABLE_ALIGN);
-+
-+    if (!p_Manip->reassmParams.p_ReassCommonTbl)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                     ("MURAM alloc for Reassembly common parameters table"));
-+
-+    MemSet8(p_Manip->reassmParams.p_ReassCommonTbl, 0,
-+               FM_PCD_MANIP_REASM_COMMON_PARAM_TABLE_SIZE);
-+
-+    /* Setting the TimeOut Mode.*/
-+    tmpReg32 = 0;
-+    if (p_Manip->reassmParams.timeOutMode
-+            == e_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAMES)
-+        tmpReg32 |= FM_PCD_MANIP_REASM_TIME_OUT_BETWEEN_FRAMES;
-+
-+    /* Setting TimeOut FQID - Frames that time out are enqueued to this FQID.
-+     In order to cause TimeOut frames to be discarded, this queue should be configured accordingly*/
-+    tmpReg32 |= p_Manip->reassmParams.fqidForTimeOutFrames;
-+    WRITE_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->timeoutModeAndFqid,
-+                 tmpReg32);
-+
-+    /* Calculation the size of IP Reassembly Frame Descriptor - number of frames that are allowed to be reassembled simultaneously + 129.*/
-+    size = p_Manip->reassmParams.maxNumFramesInProcess + 129;
-+
-+    /*Allocation of IP Reassembly Frame Descriptor Indexes Pool - This pool resides in the MURAM */
-+    p_Manip->reassmParams.reassFrmDescrIndxPoolTblAddr =
-+            PTR_TO_UINT(FM_MURAM_AllocMem(p_FmPcd->h_FmMuram,
-+                            (uint32_t)(size * 2),
-+                            256));
-+    if (!p_Manip->reassmParams.reassFrmDescrIndxPoolTblAddr)
-+        RETURN_ERROR(
-+                MAJOR, E_NO_MEMORY,
-+                ("MURAM alloc for Reassembly frame descriptor indexes pool"));
-+
-+    MemSet8(UINT_TO_PTR(p_Manip->reassmParams.reassFrmDescrIndxPoolTblAddr),
-+               0, (uint32_t)(size * 2));
-+
-+    /* The entries in IP Reassembly Frame Descriptor Indexes Pool contains indexes starting with 1 up to
-+     the maximum number of frames that are allowed to be reassembled simultaneously + 128.
-+     The last entry in this pool must contain the index zero*/
-+    for (i = 0; i < (size - 1); i++)
-+        WRITE_UINT16(
-+                *(uint16_t *)PTR_MOVE(UINT_TO_PTR(p_Manip->reassmParams.reassFrmDescrIndxPoolTblAddr), (i<<1)),
-+                (uint16_t)(i+1));
-+
-+    /* Sets the IP Reassembly Frame Descriptor Indexes Pool offset from MURAM */
-+    tmpReg32 = (uint32_t)(XX_VirtToPhys(
-+            UINT_TO_PTR(p_Manip->reassmParams.reassFrmDescrIndxPoolTblAddr))
-+            - p_FmPcd->physicalMuramBase);
-+    WRITE_UINT32(
-+            p_Manip->reassmParams.p_ReassCommonTbl->reassFrmDescIndexPoolTblPtr,
-+            tmpReg32);
-+
-+    /* Allocation of the Reassembly Frame Descriptors Pool - This pool resides in external memory.
-+     The number of entries in this pool should be equal to the number of entries in IP Reassembly Frame Descriptor Indexes Pool.*/
-+    p_Manip->reassmParams.reassFrmDescrPoolTblAddr =
-+            PTR_TO_UINT(XX_MallocSmart((uint32_t)(size * 64), p_Manip->reassmParams.dataMemId, 64));
-+
-+    if (!p_Manip->reassmParams.reassFrmDescrPoolTblAddr)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Memory allocation FAILED"));
-+
-+    MemSet8(UINT_TO_PTR(p_Manip->reassmParams.reassFrmDescrPoolTblAddr), 0,
-+               (uint32_t)(size * 64));
-+
-+    /* Sets the Reassembly Frame Descriptors Pool and liodn offset*/
-+    tmpReg64 = (uint64_t)(XX_VirtToPhys(
-+            UINT_TO_PTR(p_Manip->reassmParams.reassFrmDescrPoolTblAddr)));
-+    tmpReg64 |= ((uint64_t)(p_Manip->reassmParams.dataLiodnOffset
-+            & FM_PCD_MANIP_REASM_LIODN_MASK)
-+            << (uint64_t)FM_PCD_MANIP_REASM_LIODN_SHIFT);
-+    tmpReg64 |= ((uint64_t)(p_Manip->reassmParams.dataLiodnOffset
-+            & FM_PCD_MANIP_REASM_ELIODN_MASK)
-+            << (uint64_t)FM_PCD_MANIP_REASM_ELIODN_SHIFT);
-+    WRITE_UINT32(
-+            p_Manip->reassmParams.p_ReassCommonTbl->liodnAndReassFrmDescPoolPtrHi,
-+            (uint32_t)(tmpReg64 >> 32));
-+    WRITE_UINT32(
-+            p_Manip->reassmParams.p_ReassCommonTbl->reassFrmDescPoolPtrLow,
-+            (uint32_t)tmpReg64);
-+
-+    /*Allocation of the TimeOut table - This table resides in the MURAM.
-+     The number of entries in this table is identical to the number of entries in the Reassembly Frame Descriptors Pool*/
-+    p_Manip->reassmParams.timeOutTblAddr =
-+            PTR_TO_UINT(FM_MURAM_AllocMem(p_FmPcd->h_FmMuram, (uint32_t)(size * 8),8));
-+
-+    if (!p_Manip->reassmParams.timeOutTblAddr)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                     ("MURAM alloc for Reassembly timeout table"));
-+
-+    MemSet8(UINT_TO_PTR(p_Manip->reassmParams.timeOutTblAddr), 0,
-+               (uint16_t)(size * 8));
-+
-+    /* Sets the TimeOut table offset from MURAM */
-+    tmpReg32 = (uint32_t)(XX_VirtToPhys(
-+            UINT_TO_PTR(p_Manip->reassmParams.timeOutTblAddr))
-+            - p_FmPcd->physicalMuramBase);
-+    WRITE_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->timeOutTblPtr,
-+                 tmpReg32);
-+
-+    /* Sets the Expiration Delay */
-+    tmpReg32 = 0;
-+    tmpReg32 |= (((uint32_t)(1 << bitFor1Micro))
-+            * p_Manip->reassmParams.timeoutThresholdForReassmProcess);
-+    WRITE_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->expirationDelay,
-+                 tmpReg32);
-+
-+    err = FmPcdRegisterReassmPort(p_FmPcd,
-+                                  p_Manip->reassmParams.p_ReassCommonTbl);
-+    if (err != E_OK)
-+    {
-+        FM_MURAM_FreeMem(p_FmPcd->h_FmMuram,
-+                         p_Manip->reassmParams.p_ReassCommonTbl);
-+        RETURN_ERROR(MAJOR, err, ("port registration"));
-+    }
-+
-+    return err;
-+}
-+
-+static t_Error CreateReassTable(t_FmPcdManip *p_Manip, e_NetHeaderType hdr)
-+{
-+    t_FmPcd *p_FmPcd = p_Manip->h_FmPcd;
-+    uint32_t tmpReg32, autoLearnHashTblSize;
-+    uint32_t numOfWays, setSize, setSizeCode, keySize;
-+    uint32_t waySize, numOfSets, numOfEntries;
-+    uint64_t tmpReg64;
-+    uint16_t minFragSize;
-+    uint16_t maxReassemSize;
-+    uintptr_t *p_AutoLearnHashTblAddr, *p_AutoLearnSetLockTblAddr;
-+    t_ReassTbl **p_ReassTbl;
-+
-+    switch (hdr)
-+    {
-+        case HEADER_TYPE_IPv4:
-+            p_ReassTbl = &p_Manip->reassmParams.ip.p_Ipv4ReassTbl;
-+            p_AutoLearnHashTblAddr =
-+                    &p_Manip->reassmParams.ip.ipv4AutoLearnHashTblAddr;
-+            p_AutoLearnSetLockTblAddr =
-+                    &p_Manip->reassmParams.ip.ipv4AutoLearnSetLockTblAddr;
-+            minFragSize = p_Manip->reassmParams.ip.minFragSize[0];
-+            maxReassemSize = 0;
-+            numOfWays = p_Manip->reassmParams.ip.numOfFramesPerHashEntry[0];
-+            keySize = 4 + 4 + 1 + 2; /* 3-tuple + IP-Id */
-+            break;
-+        case HEADER_TYPE_IPv6:
-+            p_ReassTbl = &p_Manip->reassmParams.ip.p_Ipv6ReassTbl;
-+            p_AutoLearnHashTblAddr =
-+                    &p_Manip->reassmParams.ip.ipv6AutoLearnHashTblAddr;
-+            p_AutoLearnSetLockTblAddr =
-+                    &p_Manip->reassmParams.ip.ipv6AutoLearnSetLockTblAddr;
-+            minFragSize = p_Manip->reassmParams.ip.minFragSize[1];
-+            maxReassemSize = 0;
-+            numOfWays = p_Manip->reassmParams.ip.numOfFramesPerHashEntry[1];
-+            keySize = 16 + 16 + 4; /* 2-tuple + IP-Id */
-+            if (numOfWays > e_FM_PCD_MANIP_SIX_WAYS_HASH)
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("num of ways"));
-+            break;
-+        case HEADER_TYPE_CAPWAP:
-+            p_ReassTbl = &p_Manip->reassmParams.capwap.p_ReassTbl;
-+            p_AutoLearnHashTblAddr =
-+                    &p_Manip->reassmParams.capwap.autoLearnHashTblAddr;
-+            p_AutoLearnSetLockTblAddr =
-+                    &p_Manip->reassmParams.capwap.autoLearnSetLockTblAddr;
-+            minFragSize = 0;
-+            maxReassemSize = p_Manip->reassmParams.capwap.maxRessembledsSize;
-+            numOfWays = p_Manip->reassmParams.capwap.numOfFramesPerHashEntry;
-+            keySize = 4;
-+            break;
-+        default:
-+            RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("header type"));
-+    }
-+    keySize += 2; /* 2 bytes reserved for RFDIndex */
-+#if (DPAA_VERSION >= 11)
-+    keySize += 2; /* 2 bytes reserved */
-+#endif /* (DPAA_VERSION >= 11) */
-+    waySize = ROUND_UP(keySize, 8);
-+
-+    /* Allocates the Reassembly Parameters Table - This table is located in the MURAM.*/
-+    *p_ReassTbl = (t_ReassTbl *)FM_MURAM_AllocMem(
-+            p_FmPcd->h_FmMuram, FM_PCD_MANIP_REASM_TABLE_SIZE,
-+            FM_PCD_MANIP_REASM_TABLE_ALIGN);
-+    if (!*p_ReassTbl)
-+        RETURN_ERROR( MAJOR, E_NO_MEMORY,
-+                     ("MURAM alloc for Reassembly specific parameters table"));
-+    memset(*p_ReassTbl, 0, sizeof(t_ReassTbl));
-+
-+    /* Sets the Reassembly common Parameters table offset from MURAM in the Reassembly Table descriptor*/
-+    tmpReg32 = (uint32_t)(XX_VirtToPhys(p_Manip->reassmParams.p_ReassCommonTbl)
-+            - p_FmPcd->physicalMuramBase);
-+    WRITE_UINT32((*p_ReassTbl)->reassCommonPrmTblPtr, tmpReg32);
-+
-+    /* Calculate set size (set size is rounded-up to next power of 2) */
-+    NEXT_POWER_OF_2(numOfWays * waySize, setSize);
-+
-+    /* Get set size code */
-+    LOG2(setSize, setSizeCode);
-+
-+    /* Sets ways number and set size code */
-+    WRITE_UINT16((*p_ReassTbl)->waysNumAndSetSize,
-+                 (uint16_t)((numOfWays << 8) | setSizeCode));
-+
-+    /* It is recommended that the total number of entries in this table
-+     (number of sets * number of ways) will be twice the number of frames that
-+     are expected to be reassembled simultaneously.*/
-+    numOfEntries = (uint32_t)(p_Manip->reassmParams.maxNumFramesInProcess * 2);
-+
-+    /* sets number calculation - number of entries = number of sets * number of ways */
-+    numOfSets = numOfEntries / numOfWays;
-+
-+    /* Sets AutoLearnHashKeyMask*/
-+    NEXT_POWER_OF_2(numOfSets, numOfSets);
-+
-+    WRITE_UINT16((*p_ReassTbl)->autoLearnHashKeyMask,
-+                 (uint16_t)(numOfSets - 1));
-+
-+    /* Allocation of Reassembly Automatic Learning Hash Table - This table resides in external memory.
-+     The size of this table is determined by the number of sets and the set size.
-+     Table size = set size * number of sets
-+     This table base address should be aligned to SetSize.*/
-+    autoLearnHashTblSize = numOfSets * setSize;
-+
-+    *p_AutoLearnHashTblAddr =
-+            PTR_TO_UINT(XX_MallocSmart(autoLearnHashTblSize, p_Manip->reassmParams.dataMemId, setSize));
-+    if (!*p_AutoLearnHashTblAddr)
-+    {
-+        FM_MURAM_FreeMem(p_FmPcd->h_FmMuram, *p_ReassTbl);
-+        *p_ReassTbl = NULL;
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Memory allocation FAILED"));
-+    }
-+    MemSet8(UINT_TO_PTR(*p_AutoLearnHashTblAddr), 0, autoLearnHashTblSize);
-+
-+    /* Sets the Reassembly Automatic Learning Hash Table and liodn offset */
-+    tmpReg64 = ((uint64_t)(p_Manip->reassmParams.dataLiodnOffset
-+            & FM_PCD_MANIP_REASM_LIODN_MASK)
-+            << (uint64_t)FM_PCD_MANIP_REASM_LIODN_SHIFT);
-+    tmpReg64 |= ((uint64_t)(p_Manip->reassmParams.dataLiodnOffset
-+            & FM_PCD_MANIP_REASM_ELIODN_MASK)
-+            << (uint64_t)FM_PCD_MANIP_REASM_ELIODN_SHIFT);
-+    tmpReg64 |= XX_VirtToPhys(UINT_TO_PTR(*p_AutoLearnHashTblAddr));
-+    WRITE_UINT32( (*p_ReassTbl)->liodnAlAndAutoLearnHashTblPtrHi,
-+                 (uint32_t)(tmpReg64 >> 32));
-+    WRITE_UINT32((*p_ReassTbl)->autoLearnHashTblPtrLow, (uint32_t)tmpReg64);
-+
-+    /* Allocation of the Set Lock table - This table resides in external memory
-+     The size of this table is (number of sets in the Reassembly Automatic Learning Hash table)*4 bytes.
-+     This table resides in external memory and its base address should be 4-byte aligned */
-+    *p_AutoLearnSetLockTblAddr =
-+            PTR_TO_UINT(XX_MallocSmart((uint32_t)(numOfSets * 4), p_Manip->reassmParams.dataMemId, 4));
-+    if (!*p_AutoLearnSetLockTblAddr)
-+    {
-+        FM_MURAM_FreeMem(p_FmPcd->h_FmMuram, *p_ReassTbl);
-+        *p_ReassTbl = NULL;
-+        XX_FreeSmart(UINT_TO_PTR(*p_AutoLearnHashTblAddr));
-+        *p_AutoLearnHashTblAddr = 0;
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Memory allocation FAILED"));
-+    }
-+    MemSet8(UINT_TO_PTR(*p_AutoLearnSetLockTblAddr), 0, (numOfSets * 4));
-+
-+    /* sets Set Lock table pointer and liodn offset*/
-+    tmpReg64 = ((uint64_t)(p_Manip->reassmParams.dataLiodnOffset
-+            & FM_PCD_MANIP_REASM_LIODN_MASK)
-+            << (uint64_t)FM_PCD_MANIP_REASM_LIODN_SHIFT);
-+    tmpReg64 |= ((uint64_t)(p_Manip->reassmParams.dataLiodnOffset
-+            & FM_PCD_MANIP_REASM_ELIODN_MASK)
-+            << (uint64_t)FM_PCD_MANIP_REASM_ELIODN_SHIFT);
-+    tmpReg64 |= XX_VirtToPhys(UINT_TO_PTR(*p_AutoLearnSetLockTblAddr));
-+    WRITE_UINT32( (*p_ReassTbl)->liodnSlAndAutoLearnSetLockTblPtrHi,
-+                 (uint32_t)(tmpReg64 >> 32));
-+    WRITE_UINT32((*p_ReassTbl)->autoLearnSetLockTblPtrLow, (uint32_t)tmpReg64);
-+
-+    /* Sets user's requested minimum fragment size (in Bytes) for First/Middle fragment */
-+    WRITE_UINT16((*p_ReassTbl)->minFragSize, minFragSize);
-+
-+    WRITE_UINT16((*p_ReassTbl)->maxReassemblySize, maxReassemSize);
-+
-+    return E_OK;
-+}
-+
-+static t_Error UpdateInitReasm(t_Handle h_FmPcd, t_Handle h_PcdParams,
-+                               t_Handle h_FmPort, t_FmPcdManip *p_Manip,
-+                               t_Handle h_Ad, bool validate)
-+{
-+    t_FmPortGetSetCcParams fmPortGetSetCcParams;
-+    uint32_t tmpReg32;
-+    t_Error err;
-+    t_FmPortPcdParams *p_PcdParams = (t_FmPortPcdParams *)h_PcdParams;
-+#if (DPAA_VERSION >= 11)
-+    t_FmPcdCtrlParamsPage *p_ParamsPage;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Manip->frag, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(
-+            (p_Manip->opcode == HMAN_OC_IP_REASSEMBLY) || (p_Manip->opcode == HMAN_OC_CAPWAP_REASSEMBLY),
-+            E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Manip->updateParams || h_PcdParams,
-+                              E_INVALID_HANDLE);
-+
-+    UNUSED(h_Ad);
-+
-+    if (!p_Manip->updateParams)
-+        return E_OK;
-+
-+    if (p_Manip->h_FmPcd != h_FmPcd)
-+        RETURN_ERROR(
-+                MAJOR, E_INVALID_STATE,
-+                ("handler of PCD previously was initiated by different value"));
-+
-+    if (p_Manip->updateParams)
-+    {
-+        if ((!(p_Manip->updateParams
-+                & (NUM_OF_TASKS | NUM_OF_EXTRA_TASKS | DISCARD_MASK)))
-+                || ((p_Manip->shadowUpdateParams
-+                        & (NUM_OF_TASKS | NUM_OF_EXTRA_TASKS | DISCARD_MASK))))
-+            RETURN_ERROR(
-+                    MAJOR, E_INVALID_STATE,
-+                    ("in this stage parameters from Port has not be updated"));
-+
-+        fmPortGetSetCcParams.setCcParams.type = 0;
-+        if (p_Manip->opcode == HMAN_OC_CAPWAP_REASSEMBLY)
-+        {
-+            fmPortGetSetCcParams.setCcParams.type |= UPDATE_OFP_DPTE;
-+            fmPortGetSetCcParams.setCcParams.ofpDpde = 0xF;
-+        }
-+        fmPortGetSetCcParams.getCcParams.type = p_Manip->updateParams | FM_REV;
-+        if ((err = FmPortGetSetCcParams(h_FmPort, &fmPortGetSetCcParams))
-+                != E_OK)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        if (fmPortGetSetCcParams.getCcParams.type
-+                & (NUM_OF_TASKS | NUM_OF_EXTRA_TASKS | DISCARD_MASK | FM_REV))
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                         ("offset of the data wasn't configured previously"));
-+        if (p_Manip->updateParams
-+                & (NUM_OF_TASKS | NUM_OF_EXTRA_TASKS | DISCARD_MASK))
-+        {
-+            t_FmPcd *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+            uint8_t *p_Ptr, i, totalNumOfTnums;
-+
-+            totalNumOfTnums =
-+                    (uint8_t)(fmPortGetSetCcParams.getCcParams.numOfTasks
-+                            + fmPortGetSetCcParams.getCcParams.numOfExtraTasks);
-+
-+            p_Manip->reassmParams.internalBufferPoolAddr =
-+                    PTR_TO_UINT(FM_MURAM_AllocMem(p_FmPcd->h_FmMuram,
-+                                    (uint32_t)(totalNumOfTnums * BMI_FIFO_UNITS),
-+                                    BMI_FIFO_UNITS));
-+            if (!p_Manip->reassmParams.internalBufferPoolAddr)
-+                RETURN_ERROR(
-+                        MAJOR, E_NO_MEMORY,
-+                        ("MURAM alloc for Reassembly internal buffers pool"));
-+            MemSet8(
-+                    UINT_TO_PTR(p_Manip->reassmParams.internalBufferPoolAddr),
-+                    0, (uint32_t)(totalNumOfTnums * BMI_FIFO_UNITS));
-+
-+            p_Manip->reassmParams.internalBufferPoolManagementIndexAddr =
-+                    PTR_TO_UINT(FM_MURAM_AllocMem(p_FmPcd->h_FmMuram,
-+                                    (uint32_t)(5 + totalNumOfTnums),
-+                                    4));
-+            if (!p_Manip->reassmParams.internalBufferPoolManagementIndexAddr)
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_NO_MEMORY,
-+                        ("MURAM alloc for Reassembly internal buffers management"));
-+
-+            p_Ptr =
-+                    (uint8_t*)UINT_TO_PTR(p_Manip->reassmParams.internalBufferPoolManagementIndexAddr);
-+            WRITE_UINT32(
-+                    *(uint32_t*)p_Ptr,
-+                    (uint32_t)(XX_VirtToPhys(UINT_TO_PTR(p_Manip->reassmParams.internalBufferPoolAddr)) - p_FmPcd->physicalMuramBase));
-+            for (i = 0, p_Ptr += 4; i < totalNumOfTnums; i++, p_Ptr++)
-+                WRITE_UINT8(*p_Ptr, i);
-+            WRITE_UINT8(*p_Ptr, 0xFF);
-+
-+            tmpReg32 =
-+                    (4 << FM_PCD_MANIP_REASM_COMMON_INT_BUFFER_IDX_SHIFT)
-+                            | ((uint32_t)(XX_VirtToPhys(
-+                                    UINT_TO_PTR(p_Manip->reassmParams.internalBufferPoolManagementIndexAddr))
-+                                    - p_FmPcd->physicalMuramBase));
-+            WRITE_UINT32(
-+                    p_Manip->reassmParams.p_ReassCommonTbl->internalBufferManagement,
-+                    tmpReg32);
-+
-+            p_Manip->updateParams &= ~(NUM_OF_TASKS | NUM_OF_EXTRA_TASKS
-+                    | DISCARD_MASK);
-+            p_Manip->shadowUpdateParams |= (NUM_OF_TASKS | NUM_OF_EXTRA_TASKS
-+                    | DISCARD_MASK);
-+        }
-+    }
-+
-+    if (p_Manip->opcode == HMAN_OC_CAPWAP_REASSEMBLY)
-+    {
-+        if (p_Manip->reassmParams.capwap.h_Scheme)
-+        {
-+            p_PcdParams->p_KgParams->h_Schemes[p_PcdParams->p_KgParams->numOfSchemes] =
-+                    p_Manip->reassmParams.capwap.h_Scheme;
-+            p_PcdParams->p_KgParams->numOfSchemes++;
-+        }
-+
-+    }
-+    else
-+    {
-+        if (p_Manip->reassmParams.ip.h_Ipv4Scheme)
-+        {
-+            p_PcdParams->p_KgParams->h_Schemes[p_PcdParams->p_KgParams->numOfSchemes] =
-+                    p_Manip->reassmParams.ip.h_Ipv4Scheme;
-+            p_PcdParams->p_KgParams->numOfSchemes++;
-+        }
-+        if (p_Manip->reassmParams.ip.h_Ipv6Scheme)
-+        {
-+            p_PcdParams->p_KgParams->h_Schemes[p_PcdParams->p_KgParams->numOfSchemes] =
-+                    p_Manip->reassmParams.ip.h_Ipv6Scheme;
-+            p_PcdParams->p_KgParams->numOfSchemes++;
-+        }
-+#if (DPAA_VERSION >= 11)
-+        if (fmPortGetSetCcParams.getCcParams.revInfo.majorRev >= 6)
-+        {
-+            if ((err = FmPortSetGprFunc(h_FmPort, e_FM_PORT_GPR_MURAM_PAGE,
-+                                        (void**)&p_ParamsPage)) != E_OK)
-+                RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+            tmpReg32 = NIA_ENG_KG;
-+            if (p_Manip->reassmParams.ip.h_Ipv4Scheme)
-+            {
-+                tmpReg32 |= NIA_KG_DIRECT;
-+                tmpReg32 |= NIA_KG_CC_EN;
-+                tmpReg32 |= FmPcdKgGetSchemeId(
-+                        p_Manip->reassmParams.ip.h_Ipv4Scheme);
-+                WRITE_UINT32(p_ParamsPage->iprIpv4Nia, tmpReg32);
-+            }
-+            if (p_Manip->reassmParams.ip.h_Ipv6Scheme)
-+            {
-+                tmpReg32 &= ~NIA_AC_MASK;
-+                tmpReg32 |= NIA_KG_DIRECT;
-+                tmpReg32 |= NIA_KG_CC_EN;
-+                tmpReg32 |= FmPcdKgGetSchemeId(
-+                        p_Manip->reassmParams.ip.h_Ipv6Scheme);
-+                WRITE_UINT32(p_ParamsPage->iprIpv6Nia, tmpReg32);
-+            }
-+        }
-+#else
-+        if (fmPortGetSetCcParams.getCcParams.revInfo.majorRev < 6)
-+        {
-+            WRITE_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->discardMask,
-+                    fmPortGetSetCcParams.getCcParams.discardMask);
-+        }
-+#endif /* (DPAA_VERSION >= 11) */
-+    }
-+    return E_OK;
-+}
-+
-+#if (DPAA_VERSION == 10)
-+static t_Error FmPcdFragHcScratchPoolFill(t_Handle h_FmPcd, uint8_t scratchBpid)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    t_FmPcdCcFragScratchPoolCmdParams fmPcdCcFragScratchPoolCmdParams;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+
-+    memset(&fmPcdCcFragScratchPoolCmdParams, 0, sizeof(t_FmPcdCcFragScratchPoolCmdParams));
-+
-+    fmPcdCcFragScratchPoolCmdParams.numOfBuffers = NUM_OF_SCRATCH_POOL_BUFFERS;
-+    fmPcdCcFragScratchPoolCmdParams.bufferPoolId = scratchBpid;
-+    if ((err = FmHcPcdCcIpFragScratchPollCmd(p_FmPcd->h_Hc, TRUE, &fmPcdCcFragScratchPoolCmdParams)) != E_OK)
-+    RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    if (fmPcdCcFragScratchPoolCmdParams.numOfBuffers != 0)
-+    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Fill scratch pool failed,"
-+                    "Failed to release %d buffers to the BM (missing FBPRs)",
-+                    fmPcdCcFragScratchPoolCmdParams.numOfBuffers));
-+
-+    return E_OK;
-+}
-+
-+static t_Error FmPcdFragHcScratchPoolEmpty(t_Handle h_FmPcd, uint8_t scratchBpid)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    t_FmPcdCcFragScratchPoolCmdParams fmPcdCcFragScratchPoolCmdParams;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+
-+    memset(&fmPcdCcFragScratchPoolCmdParams, 0, sizeof(t_FmPcdCcFragScratchPoolCmdParams));
-+
-+    fmPcdCcFragScratchPoolCmdParams.bufferPoolId = scratchBpid;
-+    if ((err = FmHcPcdCcIpFragScratchPollCmd(p_FmPcd->h_Hc, FALSE, &fmPcdCcFragScratchPoolCmdParams)) != E_OK)
-+    RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+#endif /* (DPAA_VERSION == 10) */
-+
-+static void ReleaseManipHandler(t_FmPcdManip *p_Manip, t_FmPcd *p_FmPcd)
-+{
-+    if (p_Manip->h_Ad)
-+    {
-+        if (p_Manip->muramAllocate)
-+            FM_MURAM_FreeMem(p_FmPcd->h_FmMuram, p_Manip->h_Ad);
-+        else
-+            XX_Free(p_Manip->h_Ad);
-+        p_Manip->h_Ad = NULL;
-+    }
-+    if (p_Manip->p_Template)
-+    {
-+        FM_MURAM_FreeMem(p_FmPcd->h_FmMuram, p_Manip->p_Template);
-+        p_Manip->p_Template = NULL;
-+    }
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+    if (p_Manip->h_Frag)
-+    {
-+        if (p_Manip->capwapFragParams.p_AutoLearnHashTbl)
-+        FM_MURAM_FreeMem(p_FmPcd->h_FmMuram,
-+                p_Manip->capwapFragParams.p_AutoLearnHashTbl);
-+        if (p_Manip->capwapFragParams.p_ReassmFrmDescrPoolTbl)
-+        FM_MURAM_FreeMem(p_FmPcd->h_FmMuram,
-+                p_Manip->capwapFragParams.p_ReassmFrmDescrPoolTbl);
-+        if (p_Manip->capwapFragParams.p_ReassmFrmDescrIndxPoolTbl)
-+        FM_MURAM_FreeMem(p_FmPcd->h_FmMuram,
-+                p_Manip->capwapFragParams.p_ReassmFrmDescrIndxPoolTbl);
-+        if (p_Manip->capwapFragParams.p_TimeOutTbl)
-+        FM_MURAM_FreeMem(p_FmPcd->h_FmMuram,
-+                p_Manip->capwapFragParams.p_TimeOutTbl);
-+        FM_MURAM_FreeMem(p_FmPcd->h_FmMuram, p_Manip->h_Frag);
-+
-+    }
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+    if (p_Manip->frag)
-+    {
-+        if (p_Manip->fragParams.p_Frag)
-+        {
-+#if (DPAA_VERSION == 10)
-+            FmPcdFragHcScratchPoolEmpty((t_Handle)p_FmPcd, p_Manip->fragParams.scratchBpid);
-+#endif /* (DPAA_VERSION == 10) */
-+
-+            FM_MURAM_FreeMem(p_FmPcd->h_FmMuram, p_Manip->fragParams.p_Frag);
-+        }
-+    }
-+    else
-+        if (p_Manip->reassm)
-+        {
-+            FmPcdUnregisterReassmPort(p_FmPcd,
-+                                      p_Manip->reassmParams.p_ReassCommonTbl);
-+
-+            if (p_Manip->reassmParams.timeOutTblAddr)
-+                FM_MURAM_FreeMem(
-+                        p_FmPcd->h_FmMuram,
-+                        UINT_TO_PTR(p_Manip->reassmParams.timeOutTblAddr));
-+            if (p_Manip->reassmParams.reassFrmDescrPoolTblAddr)
-+                XX_FreeSmart(
-+                        UINT_TO_PTR(p_Manip->reassmParams.reassFrmDescrPoolTblAddr));
-+            if (p_Manip->reassmParams.p_ReassCommonTbl)
-+                FM_MURAM_FreeMem(p_FmPcd->h_FmMuram,
-+                                 p_Manip->reassmParams.p_ReassCommonTbl);
-+            if (p_Manip->reassmParams.reassFrmDescrIndxPoolTblAddr)
-+                FM_MURAM_FreeMem(
-+                        p_FmPcd->h_FmMuram,
-+                        UINT_TO_PTR(p_Manip->reassmParams.reassFrmDescrIndxPoolTblAddr));
-+            if (p_Manip->reassmParams.internalBufferPoolManagementIndexAddr)
-+                FM_MURAM_FreeMem(
-+                        p_FmPcd->h_FmMuram,
-+                        UINT_TO_PTR(p_Manip->reassmParams.internalBufferPoolManagementIndexAddr));
-+            if (p_Manip->reassmParams.internalBufferPoolAddr)
-+                FM_MURAM_FreeMem(
-+                        p_FmPcd->h_FmMuram,
-+                        UINT_TO_PTR(p_Manip->reassmParams.internalBufferPoolAddr));
-+            if (p_Manip->reassmParams.hdr == HEADER_TYPE_CAPWAP)
-+            {
-+
-+            }
-+            else
-+            {
-+                if (p_Manip->reassmParams.ip.ipv4AutoLearnHashTblAddr)
-+                    XX_FreeSmart(
-+                            UINT_TO_PTR(p_Manip->reassmParams.ip.ipv4AutoLearnHashTblAddr));
-+                if (p_Manip->reassmParams.ip.ipv6AutoLearnHashTblAddr)
-+                    XX_FreeSmart(
-+                            UINT_TO_PTR(p_Manip->reassmParams.ip.ipv6AutoLearnHashTblAddr));
-+                if (p_Manip->reassmParams.ip.ipv4AutoLearnSetLockTblAddr)
-+                    XX_FreeSmart(
-+                            UINT_TO_PTR(p_Manip->reassmParams.ip.ipv4AutoLearnSetLockTblAddr));
-+                if (p_Manip->reassmParams.ip.ipv6AutoLearnSetLockTblAddr)
-+                    XX_FreeSmart(
-+                            UINT_TO_PTR(p_Manip->reassmParams.ip.ipv6AutoLearnSetLockTblAddr));
-+                if (p_Manip->reassmParams.ip.p_Ipv4ReassTbl)
-+                    FM_MURAM_FreeMem(p_FmPcd->h_FmMuram,
-+                                     p_Manip->reassmParams.ip.p_Ipv4ReassTbl);
-+                if (p_Manip->reassmParams.ip.p_Ipv6ReassTbl)
-+                    FM_MURAM_FreeMem(p_FmPcd->h_FmMuram,
-+                                     p_Manip->reassmParams.ip.p_Ipv6ReassTbl);
-+                if (p_Manip->reassmParams.ip.h_Ipv6Ad)
-+                    XX_FreeSmart(p_Manip->reassmParams.ip.h_Ipv6Ad);
-+                if (p_Manip->reassmParams.ip.h_Ipv4Ad)
-+                    XX_FreeSmart(p_Manip->reassmParams.ip.h_Ipv4Ad);
-+            }
-+        }
-+
-+    if (p_Manip->p_StatsTbl)
-+        FM_MURAM_FreeMem(p_FmPcd->h_FmMuram, p_Manip->p_StatsTbl);
-+}
-+
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+static t_Error CheckManipParamsAndSetType(t_FmPcdManip *p_Manip, t_FmPcdManipParams *p_ManipParams)
-+{
-+    if (p_ManipParams->u.hdr.rmv)
-+    {
-+        switch (p_ManipParams->u.hdr.rmvParams.type)
-+        {
-+            case (e_FM_PCD_MANIP_RMV_BY_HDR):
-+            switch (p_ManipParams->u.hdr.rmvParams.u.byHdr.type)
-+            {
-+                case (e_FM_PCD_MANIP_RMV_BY_HDR_FROM_START) :
-+                if (p_ManipParams->u.hdr.rmvParams.u.byHdr.u.fromStartByHdr.include)
-+                {
-+                    switch (p_ManipParams->u.hdr.rmvParams.u.byHdr.u.fromStartByHdr.hdrInfo.hdr)
-+                    {
-+                        case (HEADER_TYPE_CAPWAP_DTLS) :
-+                        p_Manip->opcode = HMAN_OC_CAPWAP_RMV_DTLS_IF_EXIST;
-+                        p_Manip->muramAllocate = TRUE;
-+                        if (p_ManipParams->u.hdr.insrt)
-+                        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("for  CAPWAP_DTLS_HDR remove can not be insrt manipualtion after"));
-+                        if (p_ManipParams->fragOrReasm)
-+                        {
-+                            if (!p_ManipParams->fragOrReasmParams.frag)
-+                            {
-+                                switch (p_ManipParams->fragOrReasmParams.hdr)
-+                                {
-+                                    case (HEADER_TYPE_CAPWAP):
-+                                    p_Manip->opcode = HMAN_OC_CAPWAP_REASSEMBLY;
-+                                    break;
-+                                    default:
-+                                    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("unsupported header for Reassembly"));
-+                                }
-+                            }
-+                            else
-+                            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("for this type of manipulation frag can not be TRUE"));
-+                        }
-+                        break;
-+                        default:
-+                        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("non valid net header of remove location"));
-+                    }
-+                }
-+                else
-+                {
-+                    switch (p_ManipParams->u.hdr.rmvParams.u.byHdr.u.fromStartByHdr.hdrInfo.hdr)
-+                    {
-+                        case (HEADER_TYPE_CAPWAP_DTLS) :
-+                        case (HEADER_TYPE_CAPWAP) :
-+                        if (p_ManipParams->fragOrReasm || p_ManipParams->u.hdr.insrt)
-+                        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("for the type of remove e_FM_PCD_MANIP_RMV_FROM_START_OF_FRAME_TILL_CAPWAP can not be insert or fragOrReasm TRUE"));
-+                        p_Manip->opcode = HMAN_OC_RMV_N_OR_INSRT_INT_FRM_HDR;
-+                        p_Manip->muramAllocate = TRUE;
-+                        p_ManipParams->u.hdr.insrt = TRUE; //internal frame header
-+                        break;
-+                        default :
-+                        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("invalid type of remove manipulation"));
-+                    }
-+                }
-+                break;
-+                default :
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("invalid type of remove manipulation"));
-+            }
-+            break;
-+            default:
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("invalid type of remove manipulation"));
-+        }
-+    }
-+    else if (p_ManipParams->u.hdr.insrt)
-+    {
-+        switch (p_ManipParams->u.hdr.insrtParams.type)
-+        {
-+            case (e_FM_PCD_MANIP_INSRT_BY_TEMPLATE) :
-+
-+            p_Manip->opcode = HMAN_OC_INSRT_HDR_BY_TEMPL_N_OR_FRAG_AFTER;
-+            p_Manip->muramAllocate = FALSE;
-+            if (p_ManipParams->fragOrReasm)
-+            {
-+                if (p_ManipParams->fragOrReasmParams.frag)
-+                {
-+                    switch (p_ManipParams->fragOrReasmParams.hdr)
-+                    {
-+                        case (HEADER_TYPE_CAPWAP):
-+                        p_Manip->opcode = HMAN_OC_CAPWAP_FRAGMENTATION;
-+                        break;
-+                        default:
-+                        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Invalid header for fragmentation"));
-+                    }
-+                }
-+                else
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE,("can not reach this point"));
-+            }
-+            break;
-+
-+            default:
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("for only isert manipulation unsupported type"));
-+        }
-+    }
-+    else if (p_ManipParams->fragOrReasm)
-+    {
-+        if (p_ManipParams->fragOrReasmParams.frag)
-+        {
-+            switch (p_ManipParams->fragOrReasmParams.hdr)
-+            {
-+                case (HEADER_TYPE_CAPWAP):
-+                p_Manip->opcode = HMAN_OC_CAPWAP_FRAGMENTATION;
-+                p_Manip->muramAllocate = FALSE;
-+                break;
-+                default:
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Unsupported header for fragmentation"));
-+            }
-+        }
-+        else
-+        {
-+            switch (p_ManipParams->fragOrReasmParams.hdr)
-+            {
-+                case (HEADER_TYPE_CAPWAP):
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Reassembly has to be with additional operation - rmv = TRUE, type of remove - e_FM_PCD_MANIP_RMV_FROM_START_OF_FRAME_INCLUDE_SPECIFIC_LOCATION,type = e_FM_PCD_MANIP_LOC_BY_HDR, hdr = HEADER_TYPE_CAPWAP_DTLS"));
-+                default:
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Unsupported header for reassembly"));
-+            }
-+        }
-+
-+    }
-+    else
-+    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("User didn't ask for any manipulation"));
-+
-+    p_Manip->insrt = p_ManipParams->u.hdr.insrt;
-+    p_Manip->rmv = p_ManipParams->u.hdr.rmv;
-+
-+    return E_OK;
-+}
-+
-+#else /* not (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+static t_Error CheckManipParamsAndSetType(t_FmPcdManip *p_Manip,
-+                                          t_FmPcdManipParams *p_ManipParams)
-+{
-+    switch (p_ManipParams->type)
-+    {
-+        case e_FM_PCD_MANIP_HDR:
-+            /* Check that next-manip is not already used */
-+            if (p_ManipParams->h_NextManip)
-+            {
-+                if (!MANIP_IS_FIRST(p_ManipParams->h_NextManip))
-+                    RETURN_ERROR(
-+                            MAJOR, E_INVALID_STATE,
-+                            ("h_NextManip is already a part of another chain"));
-+                if ((MANIP_GET_TYPE(p_ManipParams->h_NextManip)
-+                        != e_FM_PCD_MANIP_HDR) &&
-+                        (MANIP_GET_TYPE(p_ManipParams->h_NextManip)
-+                        != e_FM_PCD_MANIP_FRAG))
-+                    RETURN_ERROR(
-+                            MAJOR,
-+                            E_NOT_SUPPORTED,
-+                            ("For a Header Manipulation node - no support of h_NextManip of type other than Header Manipulation or Fragmentation."));
-+            }
-+
-+            if (p_ManipParams->u.hdr.rmv)
-+            {
-+                switch (p_ManipParams->u.hdr.rmvParams.type)
-+                {
-+                    case (e_FM_PCD_MANIP_RMV_BY_HDR):
-+                        switch (p_ManipParams->u.hdr.rmvParams.u.byHdr.type)
-+                        {
-+                            case (e_FM_PCD_MANIP_RMV_BY_HDR_SPECIFIC_L2):
-+                                break;
-+#if (DPAA_VERSION >= 11)
-+                            case (e_FM_PCD_MANIP_RMV_BY_HDR_CAPWAP):
-+                                break;
-+                            case (e_FM_PCD_MANIP_RMV_BY_HDR_FROM_START):
-+                            {
-+                                t_Error err;
-+                                uint8_t prsArrayOffset;
-+
-+                                err =
-+                                        GetPrOffsetByHeaderOrField(
-+                                                &p_ManipParams->u.hdr.rmvParams.u.byHdr.u.hdrInfo,
-+                                                &prsArrayOffset);
-+                                if (err)
-+                                    RETURN_ERROR(MAJOR, err, NO_MSG);
-+                                break;
-+                            }
-+#endif /* (DPAA_VERSION >= 11) */
-+                            default:
-+                                RETURN_ERROR(
-+                                        MAJOR,
-+                                        E_INVALID_STATE,
-+                                        ("invalid type of remove manipulation"));
-+                        }
-+                        break;
-+                    case (e_FM_PCD_MANIP_RMV_GENERIC):
-+                        break;
-+                    default:
-+                        RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                                     ("invalid type of remove manipulation"));
-+                }
-+                p_Manip->opcode = HMAN_OC;
-+                p_Manip->muramAllocate = TRUE;
-+                p_Manip->rmv = TRUE;
-+            }
-+            else
-+                if (p_ManipParams->u.hdr.insrt)
-+                {
-+                    switch (p_ManipParams->u.hdr.insrtParams.type)
-+                    {
-+                        case (e_FM_PCD_MANIP_INSRT_BY_HDR):
-+                        {
-+                            switch (p_ManipParams->u.hdr.insrtParams.u.byHdr.type)
-+                            {
-+                                case (e_FM_PCD_MANIP_INSRT_BY_HDR_SPECIFIC_L2):
-+                                    /* nothing to check */
-+                                    break;
-+#if (DPAA_VERSION >= 11)
-+                                case (e_FM_PCD_MANIP_INSRT_BY_HDR_IP):
-+                                    if (p_ManipParams->u.hdr.insrtParams.u.byHdr.u.ipParams.insrt.size
-+                                            % 4)
-+                                        RETURN_ERROR(
-+                                                MAJOR,
-+                                                E_INVALID_VALUE,
-+                                                ("IP inserted header must be of size which is a multiple of four bytes"));
-+                                    break;
-+                                case (e_FM_PCD_MANIP_INSRT_BY_HDR_CAPWAP):
-+                                    if (p_ManipParams->u.hdr.insrtParams.u.byHdr.u.insrt.size
-+                                            % 4)
-+                                        RETURN_ERROR(
-+                                                MAJOR,
-+                                                E_INVALID_VALUE,
-+                                                ("CAPWAP inserted header must be of size which is a multiple of four bytes"));
-+                                    break;
-+                                case (e_FM_PCD_MANIP_INSRT_BY_HDR_UDP):
-+                                case (e_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE):
-+                                    if (p_ManipParams->u.hdr.insrtParams.u.byHdr.u.insrt.size
-+                                            != 8)
-+                                        RETURN_ERROR(
-+                                                MAJOR,
-+                                                E_INVALID_VALUE,
-+                                                ("Inserted header must be of size 8"));
-+                                    break;
-+#endif /* (DPAA_VERSION >= 11) */
-+                                default:
-+                                    RETURN_ERROR(
-+                                            MAJOR,
-+                                            E_INVALID_STATE,
-+                                            ("unsupported insert by header type"));
-+                            }
-+                        }
-+                        case (e_FM_PCD_MANIP_INSRT_GENERIC):
-+                            break;
-+                        default:
-+                            RETURN_ERROR(
-+                                    MAJOR,
-+                                    E_INVALID_STATE,
-+                                    ("for only insert manipulation unsupported type"));
-+                    }
-+                    p_Manip->opcode = HMAN_OC;
-+                    p_Manip->muramAllocate = TRUE;
-+                    p_Manip->insrt = TRUE;
-+                }
-+                else
-+                    if (p_ManipParams->u.hdr.fieldUpdate)
-+                    {
-+                        /* Check parameters */
-+                        if (p_ManipParams->u.hdr.fieldUpdateParams.type
-+                                == e_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN)
-+                        {
-+                            if ((p_ManipParams->u.hdr.fieldUpdateParams.u.vlan.updateType
-+                                    == e_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN_VPRI)
-+                                    && (p_ManipParams->u.hdr.fieldUpdateParams.u.vlan.u.vpri
-+                                            > 7))
-+                                RETURN_ERROR(
-+                                        MAJOR, E_INVALID_VALUE,
-+                                        ("vpri should get values of 0-7 "));
-+                            if (p_ManipParams->u.hdr.fieldUpdateParams.u.vlan.updateType
-+                                    == e_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN)
-+                            {
-+                                int i;
-+
-+                                if (p_ManipParams->u.hdr.fieldUpdateParams.u.vlan.u.dscpToVpri.vpriDefVal
-+                                        > 7)
-+                                    RETURN_ERROR(
-+                                            MAJOR,
-+                                            E_INVALID_VALUE,
-+                                            ("vpriDefVal should get values of 0-7 "));
-+                                for (i = 0; i < FM_PCD_MANIP_DSCP_TO_VLAN_TRANS;
-+                                        i++)
-+                                    if (p_ManipParams->u.hdr.fieldUpdateParams.u.vlan.u.dscpToVpri.dscpToVpriTable[i]
-+                                            & 0xf0)
-+                                        RETURN_ERROR(
-+                                                MAJOR,
-+                                                E_INVALID_VALUE,
-+                                                ("dscpToVpriTabl value out of range (0-15)"));
-+                            }
-+
-+                        }
-+
-+                        p_Manip->opcode = HMAN_OC;
-+                        p_Manip->muramAllocate = TRUE;
-+                        p_Manip->fieldUpdate = TRUE;
-+                    }
-+                    else
-+                        if (p_ManipParams->u.hdr.custom)
-+                        {
-+                            if (p_ManipParams->u.hdr.customParams.type == e_FM_PCD_MANIP_HDR_CUSTOM_GEN_FIELD_REPLACE)
-+                            {
-+
-+                            if ((p_ManipParams->u.hdr.customParams.u.genFieldReplace.size == 0) ||
-+                                    (p_ManipParams->u.hdr.customParams.u.genFieldReplace.size > 8))
-+                                RETURN_ERROR(
-+                                        MAJOR, E_INVALID_VALUE,
-+                                        ("size should get values of 1-8 "));
-+
-+                            if (p_ManipParams->u.hdr.customParams.u.genFieldReplace.srcOffset > 7)
-+                                RETURN_ERROR(
-+                                        MAJOR, E_INVALID_VALUE,
-+                                        ("srcOffset should be <= 7"));
-+
-+                            if ((p_ManipParams->u.hdr.customParams.u.genFieldReplace.srcOffset +
-+                                    p_ManipParams->u.hdr.customParams.u.genFieldReplace.size) > 8)
-+                                RETURN_ERROR(
-+                                        MAJOR, E_INVALID_VALUE,
-+                                        ("(srcOffset + size) should be <= 8"));
-+
-+                            if ((p_ManipParams->u.hdr.customParams.u.genFieldReplace.dstOffset +
-+                                    p_ManipParams->u.hdr.customParams.u.genFieldReplace.size) > 256)
-+                                RETURN_ERROR(
-+                                        MAJOR, E_INVALID_VALUE,
-+                                        ("(dstOffset + size) should be <= 256"));
-+
-+                            }
-+
-+                            p_Manip->opcode = HMAN_OC;
-+                            p_Manip->muramAllocate = TRUE;
-+                            p_Manip->custom = TRUE;
-+                        }
-+            break;
-+        case e_FM_PCD_MANIP_REASSEM:
-+            if (p_ManipParams->h_NextManip)
-+                RETURN_ERROR(MAJOR, E_NOT_SUPPORTED,
-+                             ("next manip with reassembly"));
-+            switch (p_ManipParams->u.reassem.hdr)
-+            {
-+                case (HEADER_TYPE_IPv4):
-+                    p_Manip->reassmParams.hdr = HEADER_TYPE_IPv4;
-+                    p_Manip->opcode = HMAN_OC_IP_REASSEMBLY;
-+                    break;
-+                case (HEADER_TYPE_IPv6):
-+                    p_Manip->reassmParams.hdr = HEADER_TYPE_IPv6;
-+                    p_Manip->opcode = HMAN_OC_IP_REASSEMBLY;
-+                    break;
-+#if (DPAA_VERSION >= 11)
-+                case (HEADER_TYPE_CAPWAP):
-+                    p_Manip->reassmParams.hdr = HEADER_TYPE_CAPWAP;
-+                    p_Manip->opcode = HMAN_OC_CAPWAP_REASSEMBLY;
-+                    break;
-+#endif /* (DPAA_VERSION >= 11) */
-+                default:
-+                    RETURN_ERROR(MAJOR, E_NOT_SUPPORTED,
-+                                 ("header for reassembly"));
-+            }
-+            break;
-+        case e_FM_PCD_MANIP_FRAG:
-+            if (p_ManipParams->h_NextManip)
-+                RETURN_ERROR(MAJOR, E_NOT_SUPPORTED,
-+                             ("next manip with fragmentation"));
-+            switch (p_ManipParams->u.frag.hdr)
-+            {
-+                case (HEADER_TYPE_IPv4):
-+                case (HEADER_TYPE_IPv6):
-+                    p_Manip->opcode = HMAN_OC_IP_FRAGMENTATION;
-+                    break;
-+#if (DPAA_VERSION >= 11)
-+                case (HEADER_TYPE_CAPWAP):
-+                    p_Manip->opcode = HMAN_OC_CAPWAP_FRAGMENTATION;
-+                    break;
-+#endif /* (DPAA_VERSION >= 11) */
-+                default:
-+                    RETURN_ERROR(MAJOR, E_NOT_SUPPORTED,
-+                                 ("header for fragmentation"));
-+            }
-+            p_Manip->muramAllocate = TRUE;
-+            break;
-+        case e_FM_PCD_MANIP_SPECIAL_OFFLOAD:
-+            switch (p_ManipParams->u.specialOffload.type)
-+            {
-+                case (e_FM_PCD_MANIP_SPECIAL_OFFLOAD_IPSEC):
-+                    p_Manip->opcode = HMAN_OC_IPSEC_MANIP;
-+                    p_Manip->muramAllocate = TRUE;
-+                    break;
-+#if (DPAA_VERSION >= 11)
-+                case (e_FM_PCD_MANIP_SPECIAL_OFFLOAD_CAPWAP):
-+                    p_Manip->opcode = HMAN_OC_CAPWAP_MANIP;
-+                    p_Manip->muramAllocate = TRUE;
-+                    break;
-+#endif /* (DPAA_VERSION >= 11) */
-+                default:
-+                    RETURN_ERROR(MAJOR, E_NOT_SUPPORTED,
-+                                 ("special offload type"));
-+            }
-+            break;
-+        default:
-+            RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("manip type"));
-+    }
-+
-+    return E_OK;
-+}
-+#endif /* not (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+
-+static t_Error UpdateIndxStats(t_Handle h_FmPcd,
-+        t_Handle h_FmPort,
-+        t_FmPcdManip *p_Manip)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    uint32_t tmpReg32 = 0;
-+    t_AdOfTypeContLookup *p_Ad;
-+    t_FmPortGetSetCcParams fmPortGetSetCcParams;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip,E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->h_Ad,E_INVALID_HANDLE);
-+
-+    p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Ad;
-+    if (p_Manip->h_FmPcd != h_FmPcd)
-+    RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+            ("handler of PCD previously was initiated by different value"));
-+
-+    memset(&fmPortGetSetCcParams, 0, sizeof(t_FmPortGetSetCcParams));
-+
-+    if (!p_Manip->p_StatsTbl)
-+    {
-+
-+        fmPortGetSetCcParams.setCcParams.type = UPDATE_NIA_PNDN;
-+        fmPortGetSetCcParams.setCcParams.nia = NIA_FM_CTL_AC_CC;
-+        err = FmPortGetSetCcParams(h_FmPort, &fmPortGetSetCcParams);
-+        if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+        tmpReg32 = GET_UINT32(p_Ad->ccAdBase);
-+
-+        p_Manip->p_StatsTbl =
-+        (t_Handle)FM_MURAM_AllocMem(p_FmPcd->h_FmMuram,
-+                (uint32_t)p_Manip->owner * FM_PCD_MANIP_INDEXED_STATS_ENTRY_SIZE,
-+                4);
-+        if (!p_Manip->p_StatsTbl)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MURAM alloc for Manipulation indexed statistics table"));
-+
-+        MemSet8(p_Manip->p_StatsTbl, 0, (uint32_t)(p_Manip->owner * 4));
-+
-+        tmpReg32 |= (uint32_t)(XX_VirtToPhys(p_Manip->p_StatsTbl) - p_FmPcd->physicalMuramBase);
-+
-+        if (p_Manip->cnia)
-+        tmpReg32 |= FM_PCD_MANIP_INDEXED_STATS_CNIA;
-+
-+        tmpReg32 |= FM_PCD_MANIP_INDEXED_STATS_DPD;
-+        WRITE_UINT32(p_Ad->ccAdBase, tmpReg32);
-+    }
-+    else
-+    {
-+        fmPortGetSetCcParams.setCcParams.type = UPDATE_NIA_PNDN;
-+        fmPortGetSetCcParams.setCcParams.nia = NIA_FM_CTL_AC_CC;
-+        err = FmPortGetSetCcParams(h_FmPort, &fmPortGetSetCcParams);
-+        if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error RmvHdrTillSpecLocNOrInsrtIntFrmHdr(t_FmPcdManipHdrRmvParams *p_ManipParams, t_FmPcdManip *p_Manip)
-+{
-+    t_AdOfTypeContLookup *p_Ad;
-+    uint32_t tmpReg32 = 0;
-+    uint8_t prsArrayOffset = 0;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip,E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_ManipParams,E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->h_Ad,E_INVALID_HANDLE);
-+
-+    p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Ad;
-+    if (p_Manip->rmv)
-+    {
-+        err = GetPrOffsetByHeaderOrField(&p_ManipParams->u.byHdr.u.fromStartByHdr.hdrInfo, &prsArrayOffset);
-+        if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+        tmpReg32 |= (uint32_t)prsArrayOffset << 24;
-+        tmpReg32 |= HMAN_RMV_HDR;
-+    }
-+
-+    if (p_Manip->insrt)
-+    tmpReg32 |= HMAN_INSRT_INT_FRM_HDR;
-+
-+    tmpReg32 |= (uint32_t)HMAN_OC_RMV_N_OR_INSRT_INT_FRM_HDR;
-+
-+    WRITE_UINT32(p_Ad->pcAndOffsets, tmpReg32);
-+
-+    tmpReg32 = 0;
-+    tmpReg32 |= FM_PCD_AD_CONT_LOOKUP_TYPE;
-+    WRITE_UINT32(p_Ad->ccAdBase, tmpReg32);
-+
-+    return E_OK;
-+}
-+
-+static t_Error MvIntFrameHeaderFromFrameToBufferPrefix(t_FmPcdManip *p_Manip,
-+        bool caamUsed)
-+{
-+    t_AdOfTypeContLookup *p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Ad;
-+    uint32_t tmpReg32 = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Ad, E_INVALID_HANDLE);
-+
-+    p_Manip->updateParams |= OFFSET_OF_PR | INTERNAL_CONTEXT_OFFSET;
-+
-+    tmpReg32 = 0;
-+    tmpReg32 |= FM_PCD_AD_CONT_LOOKUP_TYPE;
-+    *(uint32_t *)&p_Ad->ccAdBase = tmpReg32;
-+
-+    tmpReg32 = 0;
-+    tmpReg32 |= HMAN_OC_MV_INT_FRAME_HDR_FROM_FRM_TO_BUFFER_PREFFIX;
-+    tmpReg32 |= (uint32_t)0x16 << 16;
-+    *(uint32_t *)&p_Ad->pcAndOffsets = tmpReg32;
-+
-+    if (caamUsed)
-+    *(uint32_t *)&p_Ad->gmask = 0xf0000000;
-+
-+    return E_OK;
-+}
-+
-+static t_Error CapwapRmvDtlsHdr(t_FmPcd *p_FmPcd, t_FmPcdManip *p_Manip)
-+{
-+    t_AdOfTypeContLookup *p_Ad;
-+    uint32_t tmpReg32 = 0;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->h_Ad,E_INVALID_HANDLE);
-+
-+    p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Ad;
-+
-+    tmpReg32 = 0;
-+    tmpReg32 |= (uint32_t)HMAN_OC_CAPWAP_RMV_DTLS_IF_EXIST;
-+    WRITE_UINT32(p_Ad->pcAndOffsets, tmpReg32);
-+
-+    tmpReg32 = 0;
-+    tmpReg32 |= FM_PCD_AD_CONT_LOOKUP_TYPE;
-+
-+
-+    if (p_Manip->h_Frag)
-+    {
-+        p_Manip->updateParams |= INTERNAL_CONTEXT_OFFSET;
-+        tmpReg32 |= (uint32_t)(XX_VirtToPhys(p_Manip->h_Frag) - (p_FmPcd->physicalMuramBase));
-+    }
-+
-+    WRITE_UINT32(p_Ad->ccAdBase, tmpReg32);
-+
-+    return err;
-+}
-+
-+static t_Error CapwapReassembly(t_CapwapReassemblyParams *p_ManipParams,
-+        t_FmPcdManip *p_Manip,
-+        t_FmPcd *p_FmPcd,
-+        uint8_t poolId)
-+{
-+    t_Handle p_Table;
-+    uint32_t tmpReg32 = 0;
-+    int i = 0;
-+    uint8_t log2Num;
-+    uint8_t numOfSets;
-+    uint32_t j = 0;
-+    uint32_t bitFor1Micro;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->h_Ad, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->h_Hc, E_INVALID_HANDLE);
-+
-+    if (!p_FmPcd->h_Hc)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,("hc port has to be initialized in this mode"));
-+    if (!POWER_OF_2(p_ManipParams->timeoutRoutineRequestTime))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("timeoutRoutineRequestTime has to be power of 2"));
-+    if (!POWER_OF_2(p_ManipParams->maxNumFramesInProcess))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,("maxNumFramesInProcess has to be power of 2"));
-+    if (!p_ManipParams->timeoutRoutineRequestTime && p_ManipParams->timeoutThresholdForReassmProcess)
-+        DBG(WARNING, ("if timeoutRoutineRequestTime 0,  timeoutThresholdForReassmProcess is uselessly"));
-+    if (p_ManipParams->numOfFramesPerHashEntry == e_FM_PCD_MANIP_FOUR_WAYS_HASH)
-+    {
-+        if ((p_ManipParams->maxNumFramesInProcess < 4) ||
-+                (p_ManipParams->maxNumFramesInProcess > 512))
-+        RETURN_ERROR(MAJOR,E_INVALID_VALUE, ("In the case of numOfFramesPerHashEntry = e_FM_PCD_MANIP_EIGHT_WAYS_HASH maxNumFramesInProcess has to be in the range 4-512"));
-+    }
-+    else
-+    {
-+        if ((p_ManipParams->maxNumFramesInProcess < 8) ||
-+                (p_ManipParams->maxNumFramesInProcess > 2048))
-+        RETURN_ERROR(MAJOR,E_INVALID_VALUE, ("In the case of numOfFramesPerHashEntry = e_FM_PCD_MANIP_FOUR_WAYS_HASH maxNumFramesInProcess has to be in the range 8-2048"));
-+    }
-+
-+    bitFor1Micro = FmGetTimeStampScale(p_FmPcd->h_Fm);
-+    if (bitFor1Micro == 0)
-+        RETURN_ERROR(MAJOR, E_NOT_AVAILABLE, ("Timestamp scale"));
-+
-+    p_Manip->updateParams |= (NUM_OF_TASKS | OFFSET_OF_PR | OFFSET_OF_DATA | HW_PORT_ID);
-+
-+    p_Manip->h_Frag = (t_Handle)FM_MURAM_AllocMem(p_FmPcd->h_FmMuram,
-+            FM_PCD_MANIP_CAPWAP_REASM_TABLE_SIZE,
-+            FM_PCD_MANIP_CAPWAP_REASM_TABLE_ALIGN);
-+    if (!p_Manip->h_Frag)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MURAM alloc CAPWAP reassembly parameters table"));
-+
-+    MemSet8(p_Manip->h_Frag, 0, FM_PCD_MANIP_CAPWAP_REASM_TABLE_SIZE);
-+
-+    p_Table = (t_CapwapReasmPram *)p_Manip->h_Frag;
-+
-+    p_Manip->capwapFragParams.p_AutoLearnHashTbl =
-+    (t_Handle)FM_MURAM_AllocMem(p_FmPcd->h_FmMuram,
-+            (uint32_t)(p_ManipParams->maxNumFramesInProcess * 2 * FM_PCD_MANIP_CAPWAP_REASM_AUTO_LEARNING_HASH_ENTRY_SIZE),
-+            FM_PCD_MANIP_CAPWAP_REASM_TABLE_ALIGN);
-+
-+    if (!p_Manip->capwapFragParams.p_AutoLearnHashTbl)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY,("MURAM alloc for CAPWAP automatic learning hash table"));
-+
-+    MemSet8(p_Manip->capwapFragParams.p_AutoLearnHashTbl, 0, (uint32_t)(p_ManipParams->maxNumFramesInProcess * 2 * FM_PCD_MANIP_CAPWAP_REASM_AUTO_LEARNING_HASH_ENTRY_SIZE));
-+
-+    tmpReg32 = (uint32_t)(XX_VirtToPhys(p_Manip->capwapFragParams.p_AutoLearnHashTbl) - p_FmPcd->physicalMuramBase);
-+
-+    WRITE_UINT32(((t_CapwapReasmPram *)p_Table)->autoLearnHashTblPtr, tmpReg32);
-+
-+    tmpReg32 = 0;
-+    if (p_ManipParams->timeOutMode == e_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAMES)
-+        tmpReg32 |= FM_PCD_MANIP_CAPWAP_REASM_TIME_OUT_BETWEEN_FRAMES;
-+    if (p_ManipParams->haltOnDuplicationFrag)
-+        tmpReg32 |= FM_PCD_MANIP_CAPWAP_REASM_HALT_ON_DUPLICATE_FRAG;
-+    if (p_ManipParams->numOfFramesPerHashEntry == e_FM_PCD_MANIP_EIGHT_WAYS_HASH)
-+    {
-+        i = 8;
-+        tmpReg32 |= FM_PCD_MANIP_CAPWAP_REASM_AUTOMATIC_LEARNIN_HASH_8_WAYS;
-+    }
-+    else
-+    i = 4;
-+
-+    numOfSets = (uint8_t)((p_ManipParams->maxNumFramesInProcess * 2) / i);
-+    LOG2(numOfSets, log2Num);
-+    tmpReg32 |= (uint32_t)(log2Num - 1) << 24;
-+
-+    WRITE_UINT32(((t_CapwapReasmPram *)p_Table)->mode, tmpReg32);
-+
-+    for (j=0; j<p_ManipParams->maxNumFramesInProcess*2; j++)
-+        if (((j / i) % 2)== 0)
-+            WRITE_UINT32(*(uint32_t *)PTR_MOVE(p_Manip->capwapFragParams.p_AutoLearnHashTbl, j * FM_PCD_MANIP_CAPWAP_REASM_AUTO_LEARNING_HASH_ENTRY_SIZE), 0x80000000);
-+
-+    tmpReg32 = 0x00008000;
-+    tmpReg32 |= (uint32_t)poolId << 16;
-+    WRITE_UINT32(((t_CapwapReasmPram *)p_Table)->bufferPoolIdAndRisc1SetIndexes, tmpReg32);
-+    WRITE_UINT32(((t_CapwapReasmPram *)p_Table)->risc23SetIndexes, 0x80008000);
-+    WRITE_UINT32(((t_CapwapReasmPram *)p_Table)->risc4SetIndexesAndExtendedStatsTblPtr, 0x80000000);
-+
-+    p_Manip->capwapFragParams.maxNumFramesInProcess = p_ManipParams->maxNumFramesInProcess;
-+
-+    p_Manip->capwapFragParams.sgBpid = poolId;
-+
-+    p_Manip->capwapFragParams.fqidForTimeOutFrames = p_ManipParams->fqidForTimeOutFrames;
-+    p_Manip->capwapFragParams.timeoutRoutineRequestTime = p_ManipParams->timeoutRoutineRequestTime;
-+    p_Manip->capwapFragParams.bitFor1Micro = bitFor1Micro;
-+
-+    tmpReg32 = 0;
-+    tmpReg32 |= (((uint32_t)1<<p_Manip->capwapFragParams.bitFor1Micro) * p_ManipParams->timeoutThresholdForReassmProcess);
-+    WRITE_UINT32(((t_CapwapReasmPram *)p_Table)->expirationDelay, tmpReg32);
-+
-+    return E_OK;
-+}
-+
-+static t_Error CapwapFragmentation(t_CapwapFragmentationParams *p_ManipParams,
-+        t_FmPcdManip *p_Manip,
-+        t_FmPcd *p_FmPcd,
-+        uint8_t poolId)
-+{
-+    t_AdOfTypeContLookup *p_Ad;
-+    uint32_t tmpReg32 = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->h_Ad,E_INVALID_HANDLE);
-+
-+    p_Manip->updateParams |= OFFSET_OF_DATA;
-+
-+    p_Manip->frag = TRUE;
-+
-+    p_Manip->h_Frag = (t_Handle)FM_MURAM_AllocMem(p_FmPcd->h_FmMuram,
-+            FM_PCD_CC_AD_ENTRY_SIZE,
-+            FM_PCD_CC_AD_TABLE_ALIGN);
-+    if (!p_Manip->h_Frag)
-+    RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MURAM alloc for CAPWAP fragmentation table descriptor"));
-+
-+    MemSet8(p_Manip->h_Frag, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Frag;
-+
-+    tmpReg32 = 0;
-+    tmpReg32 |= (uint32_t)HMAN_OC_CAPWAP_FRAGMENTATION;
-+
-+    if (p_ManipParams->headerOptionsCompr)
-+    tmpReg32 |= FM_PCD_MANIP_CAPWAP_FRAG_COMPR_OPTION_FIELD_EN;
-+    tmpReg32 |= ((uint32_t)poolId << 8);
-+    WRITE_UINT32(p_Ad->pcAndOffsets, tmpReg32);
-+
-+    tmpReg32 = 0;
-+    tmpReg32 |= FM_PCD_AD_CONT_LOOKUP_TYPE;
-+    WRITE_UINT32(p_Ad->ccAdBase, tmpReg32);
-+
-+    p_Manip->sizeForFragmentation = p_ManipParams->sizeForFragmentation;
-+    p_Manip->capwapFragParams.sgBpid = poolId;
-+
-+    return E_OK;
-+}
-+
-+static t_Error IndxStats(t_FmPcdStatsParams *p_StatsParams,t_FmPcdManip *p_Manip,t_FmPcd *p_FmPcd)
-+{
-+    t_AdOfTypeContLookup *p_Ad;
-+    uint32_t tmpReg32 = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->h_Ad,E_INVALID_HANDLE);
-+
-+    UNUSED(p_FmPcd);
-+
-+    p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Ad;
-+
-+    tmpReg32 = 0;
-+    tmpReg32 |= (uint32_t)HMAN_OC_CAPWAP_INDEXED_STATS;
-+    if (p_StatsParams->type == e_FM_PCD_STATS_PER_FLOWID)
-+    tmpReg32 |= (uint32_t)0x16 << 16;
-+    WRITE_UINT32(p_Ad->pcAndOffsets, tmpReg32);
-+
-+    tmpReg32 = 0;
-+    tmpReg32 |= FM_PCD_AD_CONT_LOOKUP_TYPE;
-+    WRITE_UINT32(p_Ad->ccAdBase, tmpReg32);
-+
-+    return E_OK;
-+}
-+
-+static t_Error InsrtHdrByTempl(t_FmPcdManipHdrInsrtParams *p_ManipParams, t_FmPcdManip *p_Manip, t_FmPcd *p_FmPcd)
-+{
-+    t_FmPcdManipHdrInsrtByTemplateParams *p_InsrtByTemplate = &p_ManipParams->u.byTemplate;
-+    uint8_t tmpReg8 = 0xff;
-+    t_AdOfTypeContLookup *p_Ad;
-+    bool ipModify = FALSE;
-+    uint32_t tmpReg32 = 0, tmpRegNia = 0;
-+    uint16_t tmpReg16 = 0;
-+    t_Error err = E_OK;
-+    uint8_t extraAddedBytes = 0, blockSize = 0, extraAddedBytesAlignedToBlockSize = 0, log2Num = 0;
-+    uint8_t *p_Template = NULL;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_ManipParams,E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_Manip,E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->h_Ad,E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd,E_NULL_POINTER);
-+
-+    p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Ad;
-+    if (p_Manip->insrt)
-+    {
-+        if ((!p_InsrtByTemplate->size && p_InsrtByTemplate->modifyOuterIp) ||
-+                (!p_InsrtByTemplate->size && p_InsrtByTemplate->modifyOuterVlan))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Inconsistent parameters : asking for header template modifications with no template for insertion (template size)"));
-+
-+        if (p_InsrtByTemplate->size && p_InsrtByTemplate->modifyOuterIp && (p_InsrtByTemplate->size <= p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Inconsistent parameters : size of template < ipOuterOffset"));
-+
-+        if (p_InsrtByTemplate->size > 128)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Size of header template for insertion can not be more than 128"));
-+
-+        if (p_InsrtByTemplate->size)
-+        {
-+            p_Manip->p_Template = (uint8_t *)FM_MURAM_AllocMem(p_FmPcd->h_FmMuram,
-+                    p_InsrtByTemplate->size,
-+                    FM_PCD_CC_AD_TABLE_ALIGN);
-+            if(!p_Manip->p_Template)
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Memory allocation in MURAM FAILED"));
-+
-+            tmpReg32 = (uint32_t)(XX_VirtToPhys(p_Manip->p_Template) - (p_FmPcd->physicalMuramBase));
-+            tmpReg32 |= (uint32_t)p_InsrtByTemplate->size << 24;
-+            *(uint32_t *)&p_Ad->matchTblPtr = tmpReg32;
-+        }
-+
-+        tmpReg32 = 0;
-+
-+        p_Template = (uint8_t *)XX_Malloc(p_InsrtByTemplate->size * sizeof(uint8_t));
-+
-+        if (!p_Template)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("XX_Malloc allocation FAILED"));
-+
-+        memcpy(p_Template, p_InsrtByTemplate->hdrTemplate, p_InsrtByTemplate->size * sizeof(uint8_t));
-+
-+        if (p_InsrtByTemplate->modifyOuterIp)
-+        {
-+            ipModify = TRUE;
-+
-+            tmpReg8 = (uint8_t)p_Template[p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset];
-+
-+            if((tmpReg8 & 0xf0) == 0x40)
-+            tmpReg8 = 4;
-+            else if((tmpReg8 & 0xf0) == 0x60)
-+            tmpReg8 = 6;
-+            else
-+            tmpReg8 = 0xff;
-+
-+            if (tmpReg8 != 0xff)
-+            {
-+                if(p_InsrtByTemplate->modifyOuterIpParams.dscpEcn & 0xff00)
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Inconsistent parameters : IPV4 present in header template, dscpEcn has to be only 1 byte"));
-+                if(p_InsrtByTemplate->modifyOuterIpParams.recalculateLength)
-+                {
-+
-+                    if((p_InsrtByTemplate->modifyOuterIpParams.recalculateLengthParams.extraBytesAddedAlignedToBlockSize + p_InsrtByTemplate->modifyOuterIpParams.recalculateLengthParams.extraBytesAddedNotAlignedToBlockSize) > 255)
-+                    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("extra Byte added can not be more than 256 bytes"));
-+                    extraAddedBytes = (uint8_t) (p_InsrtByTemplate->modifyOuterIpParams.recalculateLengthParams.extraBytesAddedAlignedToBlockSize + p_InsrtByTemplate->modifyOuterIpParams.recalculateLengthParams.extraBytesAddedNotAlignedToBlockSize);
-+                    blockSize = p_InsrtByTemplate->modifyOuterIpParams.recalculateLengthParams.blockSize;
-+                    extraAddedBytesAlignedToBlockSize = p_InsrtByTemplate->modifyOuterIpParams.recalculateLengthParams.extraBytesAddedAlignedToBlockSize;
-+                    /*IP header template - IP totalLength -
-+                     (1 byte) extraByteForIp = headerTemplateSize - ipOffset + insertedBytesAfterThisStage ,
-+                     in the case of SEC insertedBytesAfterThisStage - SEC trailer (21/31) + header(13)
-+                     second byte - extraByteForIp = headerTemplate - ipOffset + insertedBytesAfterThisStage*/
-+                }
-+                if (blockSize)
-+                {
-+                    if (!POWER_OF_2(blockSize))
-+                    RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("inputFrmPaddingUpToBlockSize has to be power of 2"));
-+                }
-+
-+            }
-+            if (tmpReg8 == 4)
-+            {
-+                if ((IPv4_HDRCHECKSUM_FIELD_OFFSET_FROM_IP + p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset) > p_InsrtByTemplate->size)
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Inconsistent parameters : IP present in header template, user asked for IP modifications but ipOffset + ipTotalLengthFieldOffset in header template bigger than template size"));
-+
-+                p_Template[p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset + IPv4_DSCECN_FIELD_OFFSET_FROM_IP] = (uint8_t)p_InsrtByTemplate->modifyOuterIpParams.dscpEcn;
-+
-+                if (blockSize)
-+                blockSize -= 1;
-+
-+                if ((p_InsrtByTemplate->size - p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset + extraAddedBytes) > 255)
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("p_InsrtByTemplate->size - p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset + extraAddedBytes has to be less than 255"));
-+
-+                p_Template[p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset + IPv4_TOTALLENGTH_FIELD_OFFSET_FROM_IP + 1] = blockSize; // IPV6 - in AD instead of SEQ IND
-+                p_Template[p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset + IPv4_TOTALLENGTH_FIELD_OFFSET_FROM_IP] = (uint8_t)(p_InsrtByTemplate->size - p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset + extraAddedBytes);// for IPV6 decrement additional 40 bytes of IPV6 heade size
-+
-+                p_Template[p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset + IPv4_ID_FIELD_OFFSET_FROM_IP] = 0x00;
-+                p_Template[p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset + IPv4_ID_FIELD_OFFSET_FROM_IP + 1] = extraAddedBytesAlignedToBlockSize;
-+
-+                /*IP header template - relevant only for ipv4 CheckSum = 0*/
-+                p_Template[p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset + IPv4_HDRCHECKSUM_FIELD_OFFSET_FROM_IP] = 0x00;
-+                p_Template[p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset + IPv4_HDRCHECKSUM_FIELD_OFFSET_FROM_IP + 1] = 0x00;
-+
-+                /*UDP checksum has to be 0*/
-+                if (p_InsrtByTemplate->modifyOuterIpParams.udpPresent)
-+                {
-+                    if ((p_InsrtByTemplate->modifyOuterIpParams.udpOffset + UDP_CHECKSUM_FIELD_OFFSET_FROM_UDP + UDP_CHECKSUM_FIELD_SIZE) > p_InsrtByTemplate->size)
-+                    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Inconsistent parameters : UDP present according to user but (UDP offset + UDP header size) < size of header template"));
-+
-+                    p_Template[p_InsrtByTemplate->modifyOuterIpParams.udpOffset + UDP_CHECKSUM_FIELD_OFFSET_FROM_UDP ] = 0x00;
-+                    p_Template[p_InsrtByTemplate->modifyOuterIpParams.udpOffset + UDP_CHECKSUM_FIELD_OFFSET_FROM_UDP + 1] = 0x00;
-+
-+                }
-+
-+                if (p_InsrtByTemplate->modifyOuterIpParams.ipIdentGenId > 7)
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("ipIdentGenId has to be one out of 8 sequence number generators (0 - 7) for IP identification field"));
-+
-+                tmpRegNia |= (uint32_t)p_InsrtByTemplate->modifyOuterIpParams.ipIdentGenId<<24;
-+            }
-+            else if (tmpReg8 == 6)
-+            {
-+                /*TODO - add check for maximum value of blockSize;*/
-+                if (blockSize)
-+                LOG2(blockSize, log2Num);
-+                tmpRegNia |= (uint32_t)log2Num << 24;
-+
-+                // for IPV6 decrement additional 40 bytes of IPV6 heade size - because IPV6 header size is not included in payloadLength
-+                p_Template[p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset + IPv6_PAYLOAD_LENGTH_OFFSET_FROM_IP] = (uint8_t)(p_InsrtByTemplate->size - p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset + extraAddedBytes - 40);
-+                p_Template[p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset + IPv6_PAYLOAD_LENGTH_OFFSET_FROM_IP + 1] = extraAddedBytesAlignedToBlockSize;
-+                if (p_InsrtByTemplate->modifyOuterIpParams.udpPresent)
-+                {
-+                    if ((p_InsrtByTemplate->modifyOuterIpParams.udpOffset + UDP_CHECKSUM_FIELD_OFFSET_FROM_UDP + UDP_CHECKSUM_FIELD_SIZE) > p_InsrtByTemplate->size)
-+                    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Inconsistent parameters : UDP present according to user but (UDP offset + UDP header size) < size of header template"));
-+                    if (p_Template[p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset + IPv6_NEXT_HEADER_OFFSET_FROM_IP] != 0x88)
-+                    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("OUr suppport is only IPv6/UDPLite"));
-+                    p_Template[p_InsrtByTemplate->modifyOuterIpParams.udpOffset + UDP_LENGTH_FIELD_OFFSET_FROM_UDP] = 0x00;
-+                    p_Template[p_InsrtByTemplate->modifyOuterIpParams.udpOffset + UDP_LENGTH_FIELD_OFFSET_FROM_UDP + 1] = 0x08;
-+                    p_Template[p_InsrtByTemplate->modifyOuterIpParams.udpOffset + UDP_CHECKSUM_FIELD_OFFSET_FROM_UDP] = 0x00;
-+                    p_Template[p_InsrtByTemplate->modifyOuterIpParams.udpOffset + UDP_CHECKSUM_FIELD_OFFSET_FROM_UDP + 1] = 0x00;
-+                }
-+            }
-+            else
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("IP version supported only IPV4"));
-+        }
-+
-+        tmpReg32 = tmpReg16 = tmpReg8 = 0;
-+        /*TODO - check it*/
-+        if (p_InsrtByTemplate->modifyOuterVlan)
-+        {
-+            if (p_InsrtByTemplate->modifyOuterVlanParams.vpri & ~0x07)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE,("Inconsistent parameters : user asked for VLAN modifications but VPRI more than 3 bits"));
-+
-+            memcpy(&tmpReg16, &p_Template[VLAN_TAG_FIELD_OFFSET_FROM_ETH], 2*(sizeof(uint8_t)));
-+            if ((tmpReg16 != 0x9100) && (tmpReg16!= 0x9200) && (tmpReg16 != 0x8100))
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE,("Inconsistent parameters : user asked for VLAN modifications but Tag Protocol identifier is not VLAN "));
-+
-+            memcpy(&tmpReg8, &p_Template[14],1*(sizeof(uint8_t)));
-+            tmpReg8 &= 0x1f;
-+            tmpReg8 |= (uint8_t)(p_InsrtByTemplate->modifyOuterVlanParams.vpri << 5);
-+
-+            p_Template[14] = tmpReg8;
-+        }
-+
-+        MemCpy8(p_Manip->p_Template, p_Template, p_InsrtByTemplate->size);
-+
-+        XX_Free(p_Template);
-+    }
-+
-+    tmpReg32 = 0;
-+    if (p_Manip->h_Frag)
-+    {
-+        tmpRegNia |= (uint32_t)(XX_VirtToPhys(p_Manip->h_Frag) - (p_FmPcd->physicalMuramBase));
-+        tmpReg32 |= (uint32_t)p_Manip->sizeForFragmentation << 16;
-+    }
-+    else
-+    tmpReg32 = 0xffff0000;
-+
-+    if (ipModify)
-+    tmpReg32 |= (uint32_t)p_InsrtByTemplate->modifyOuterIpParams.ipOuterOffset << 8;
-+    else
-+    tmpReg32 |= (uint32_t)0x0000ff00;
-+
-+    tmpReg32 |= (uint32_t)HMAN_OC_INSRT_HDR_BY_TEMPL_N_OR_FRAG_AFTER;
-+    *(uint32_t *)&p_Ad->pcAndOffsets = tmpReg32;
-+
-+    tmpRegNia |= FM_PCD_AD_CONT_LOOKUP_TYPE;
-+    *(uint32_t *)&p_Ad->ccAdBase = tmpRegNia;
-+
-+    return err;
-+}
-+
-+static t_Error CheckStatsParamsAndSetType(t_FmPcdManip *p_Manip, t_FmPcdStatsParams *p_StatsParams)
-+{
-+
-+    switch (p_StatsParams->type)
-+    {
-+        case (e_FM_PCD_STATS_PER_FLOWID):
-+        p_Manip->opcode = HMAN_OC_CAPWAP_INDEXED_STATS;
-+        p_Manip->muramAllocate = TRUE;
-+        break;
-+        default:
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Unsupported statistics type"));
-+    }
-+
-+    return E_OK;
-+}
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+
-+static t_Error FillReassmManipParams(t_FmPcdManip *p_Manip, e_NetHeaderType hdr)
-+{
-+    t_AdOfTypeContLookup *p_Ad;
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)p_Manip->h_FmPcd;
-+    uint32_t tmpReg32;
-+    t_Error err = E_OK;
-+
-+    /* Creates the Reassembly Parameters table. It contains parameters that are specific to either the IPv4 reassembly
-+     function or to the IPv6 reassembly function. If both IPv4 reassembly and IPv6 reassembly are required, then
-+     two separate IP Reassembly Parameter tables are required.*/
-+    if ((err = CreateReassTable(p_Manip, hdr)) != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    /* Sets the first Ad register (ccAdBase) - Action Descriptor Type and Pointer to the Reassembly Parameters Table offset from MURAM*/
-+    tmpReg32 = 0;
-+    tmpReg32 |= FM_PCD_AD_CONT_LOOKUP_TYPE;
-+
-+    /* Gets the required Action descriptor table pointer */
-+    switch (hdr)
-+    {
-+        case HEADER_TYPE_IPv4:
-+            p_Ad = (t_AdOfTypeContLookup *)p_Manip->reassmParams.ip.h_Ipv4Ad;
-+            tmpReg32 |= (uint32_t)(XX_VirtToPhys(
-+                    p_Manip->reassmParams.ip.p_Ipv4ReassTbl)
-+                    - (p_FmPcd->physicalMuramBase));
-+            break;
-+        case HEADER_TYPE_IPv6:
-+            p_Ad = (t_AdOfTypeContLookup *)p_Manip->reassmParams.ip.h_Ipv6Ad;
-+            tmpReg32 |= (uint32_t)(XX_VirtToPhys(
-+                    p_Manip->reassmParams.ip.p_Ipv6ReassTbl)
-+                    - (p_FmPcd->physicalMuramBase));
-+            break;
-+        case HEADER_TYPE_CAPWAP:
-+            p_Ad = (t_AdOfTypeContLookup *)p_Manip->reassmParams.capwap.h_Ad;
-+            tmpReg32 |= (uint32_t)(XX_VirtToPhys(
-+                    p_Manip->reassmParams.capwap.p_ReassTbl)
-+                    - (p_FmPcd->physicalMuramBase));
-+            break;
-+        default:
-+            RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("header type"));
-+    }
-+
-+    WRITE_UINT32(p_Ad->ccAdBase, tmpReg32);
-+
-+    /* Sets the second Ad register (matchTblPtr) - Buffer pool ID (BPID for V2) and Scatter/Gather table offset*/
-+    /* mark the Scatter/Gather table offset to be set later on when the port will be known */
-+    p_Manip->updateParams = (NUM_OF_TASKS | NUM_OF_EXTRA_TASKS | DISCARD_MASK);
-+
-+    if ((hdr == HEADER_TYPE_IPv6) || (hdr == HEADER_TYPE_IPv4))
-+    {
-+#if (DPAA_VERSION == 10)
-+        tmpReg32 = (uint32_t)(p_Manip->reassmParams.sgBpid << 8);
-+        WRITE_UINT32(p_Ad->matchTblPtr, tmpReg32);
-+#endif /* (DPAA_VERSION == 10) */
-+#if (DPAA_VERSION >= 11)
-+        if (p_Manip->reassmParams.ip.nonConsistentSpFqid != 0)
-+        {
-+            tmpReg32 = FM_PCD_AD_NCSPFQIDM_MASK
-+                    | (uint32_t)(p_Manip->reassmParams.ip.nonConsistentSpFqid);
-+            WRITE_UINT32(p_Ad->gmask, tmpReg32);
-+        }
-+#endif /* (DPAA_VERSION >= 11) */
-+        /* Sets the third Ad register (pcAndOffsets)- IP Reassemble Operation Code*/
-+        tmpReg32 = 0;
-+        tmpReg32 |= (uint32_t)HMAN_OC_IP_REASSEMBLY;
-+    }
-+#if (DPAA_VERSION >= 11)
-+    else
-+        if (hdr == HEADER_TYPE_CAPWAP)
-+        {
-+            tmpReg32 = 0;
-+            tmpReg32 |= (uint32_t)HMAN_OC_CAPWAP_REASSEMBLY;
-+        }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    WRITE_UINT32(p_Ad->pcAndOffsets, tmpReg32);
-+
-+    p_Manip->reassm = TRUE;
-+
-+    return E_OK;
-+}
-+
-+static t_Error SetIpv4ReassmManip(t_FmPcdManip *p_Manip)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)p_Manip->h_FmPcd;
-+
-+    /* Allocation if IPv4 Action descriptor */
-+    p_Manip->reassmParams.ip.h_Ipv4Ad = (t_Handle)XX_MallocSmart(
-+            FM_PCD_CC_AD_ENTRY_SIZE, p_Manip->reassmParams.dataMemId,
-+            FM_PCD_CC_AD_TABLE_ALIGN);
-+    if (!p_Manip->reassmParams.ip.h_Ipv4Ad)
-+    {
-+        ReleaseManipHandler(p_Manip, p_FmPcd);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                     ("Allocation of IPv4 table descriptor"));
-+    }
-+
-+    memset(p_Manip->reassmParams.ip.h_Ipv4Ad, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    /* Fill reassembly manipulation parameter in the IP Reassembly Action Descriptor */
-+    return FillReassmManipParams(p_Manip, HEADER_TYPE_IPv4);
-+}
-+
-+static t_Error SetIpv6ReassmManip(t_FmPcdManip *p_Manip)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)p_Manip->h_FmPcd;
-+
-+    /* Allocation if IPv6 Action descriptor */
-+    p_Manip->reassmParams.ip.h_Ipv6Ad = (t_Handle)XX_MallocSmart(
-+            FM_PCD_CC_AD_ENTRY_SIZE, p_Manip->reassmParams.dataMemId,
-+            FM_PCD_CC_AD_TABLE_ALIGN);
-+    if (!p_Manip->reassmParams.ip.h_Ipv6Ad)
-+    {
-+        ReleaseManipHandler(p_Manip, p_FmPcd);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                     ("Allocation of IPv6 table descriptor"));
-+    }
-+
-+    memset(p_Manip->reassmParams.ip.h_Ipv6Ad, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    /* Fill reassembly manipulation parameter in the IP Reassembly Action Descriptor */
-+    return FillReassmManipParams(p_Manip, HEADER_TYPE_IPv6);
-+}
-+
-+static t_Error IpReassembly(t_FmPcdManipReassemParams *p_ManipReassmParams,
-+                            t_FmPcdManip *p_Manip)
-+{
-+    uint32_t maxSetNumber = 10000;
-+    t_FmPcdManipReassemIpParams reassmManipParams =
-+            p_ManipReassmParams->u.ipReassem;
-+    t_Error res;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->h_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(((t_FmPcd *)p_Manip->h_FmPcd)->h_Hc,
-+                              E_INVALID_HANDLE);
-+
-+    /* Check validation of user's parameter.*/
-+    if ((reassmManipParams.timeoutThresholdForReassmProcess < 1000)
-+            || (reassmManipParams.timeoutThresholdForReassmProcess > 8000000))
-+        RETURN_ERROR(
-+                MAJOR, E_INVALID_VALUE,
-+                ("timeoutThresholdForReassmProcess should be 1msec - 8sec"));
-+    /* It is recommended that the total number of entries in this table (number of sets * number of ways)
-+     will be twice the number of frames that are expected to be reassembled simultaneously.*/
-+    if (reassmManipParams.maxNumFramesInProcess
-+            > (reassmManipParams.maxNumFramesInProcess * maxSetNumber / 2))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("maxNumFramesInProcess has to be less than (maximun set number * number of ways / 2)"));
-+
-+    if ((p_ManipReassmParams->hdr == HEADER_TYPE_IPv6)
-+            && (reassmManipParams.minFragSize[1] < 256))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("minFragSize[1] must be >= 256"));
-+
-+    /* Saves user's reassembly manipulation parameters */
-+    p_Manip->reassmParams.ip.relativeSchemeId[0] =
-+            reassmManipParams.relativeSchemeId[0];
-+    p_Manip->reassmParams.ip.relativeSchemeId[1] =
-+            reassmManipParams.relativeSchemeId[1];
-+    p_Manip->reassmParams.ip.numOfFramesPerHashEntry[0] =
-+            reassmManipParams.numOfFramesPerHashEntry[0];
-+    p_Manip->reassmParams.ip.numOfFramesPerHashEntry[1] =
-+            reassmManipParams.numOfFramesPerHashEntry[1];
-+    p_Manip->reassmParams.ip.minFragSize[0] = reassmManipParams.minFragSize[0];
-+    p_Manip->reassmParams.ip.minFragSize[1] = reassmManipParams.minFragSize[1];
-+    p_Manip->reassmParams.maxNumFramesInProcess =
-+            reassmManipParams.maxNumFramesInProcess;
-+    p_Manip->reassmParams.timeOutMode = reassmManipParams.timeOutMode;
-+    p_Manip->reassmParams.fqidForTimeOutFrames =
-+            reassmManipParams.fqidForTimeOutFrames;
-+    p_Manip->reassmParams.timeoutThresholdForReassmProcess =
-+            reassmManipParams.timeoutThresholdForReassmProcess;
-+    p_Manip->reassmParams.dataMemId = reassmManipParams.dataMemId;
-+    p_Manip->reassmParams.dataLiodnOffset = reassmManipParams.dataLiodnOffset;
-+#if (DPAA_VERSION == 10)
-+    p_Manip->reassmParams.sgBpid = reassmManipParams.sgBpid;
-+#endif /* (DPAA_VERSION == 10) */
-+#if (DPAA_VERSION >= 11)
-+    if (reassmManipParams.nonConsistentSpFqid != 0)
-+    {
-+        p_Manip->reassmParams.ip.nonConsistentSpFqid =
-+                reassmManipParams.nonConsistentSpFqid;
-+    }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    /* Creates and initializes the IP Reassembly common parameter table */
-+    CreateReassCommonTable(p_Manip);
-+
-+    /* Creation of IPv4 reassembly manipulation */
-+    if ((p_Manip->reassmParams.hdr == HEADER_TYPE_IPv6)
-+            || (p_Manip->reassmParams.hdr == HEADER_TYPE_IPv4))
-+    {
-+        res = SetIpv4ReassmManip(p_Manip);
-+        if (res != E_OK)
-+            return res;
-+    }
-+
-+    /* Creation of IPv6 reassembly manipulation */
-+    if (p_Manip->reassmParams.hdr == HEADER_TYPE_IPv6)
-+    {
-+        res = SetIpv6ReassmManip(p_Manip);
-+        if (res != E_OK)
-+            return res;
-+    }
-+
-+    return E_OK;
-+}
-+
-+static void setIpReassmSchemeParams(t_FmPcd* p_FmPcd,
-+                                    t_FmPcdKgSchemeParams *p_Scheme,
-+                                    t_Handle h_CcTree, bool ipv4,
-+                                    uint8_t groupId)
-+{
-+    uint32_t j;
-+    uint8_t res;
-+
-+    /* Configures scheme's network environment parameters */
-+    p_Scheme->netEnvParams.numOfDistinctionUnits = 2;
-+    if (ipv4)
-+        res = FmPcdNetEnvGetUnitId(
-+                p_FmPcd, FmPcdGetNetEnvId(p_Scheme->netEnvParams.h_NetEnv),
-+                HEADER_TYPE_IPv4, FALSE, 0);
-+    else
-+        res = FmPcdNetEnvGetUnitId(
-+                p_FmPcd, FmPcdGetNetEnvId(p_Scheme->netEnvParams.h_NetEnv),
-+                HEADER_TYPE_IPv6, FALSE, 0);
-+    ASSERT_COND(res != FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS);
-+    p_Scheme->netEnvParams.unitIds[0] = res;
-+
-+    res = FmPcdNetEnvGetUnitId(
-+            p_FmPcd, FmPcdGetNetEnvId(p_Scheme->netEnvParams.h_NetEnv),
-+            HEADER_TYPE_USER_DEFINED_SHIM2, FALSE, 0);
-+    ASSERT_COND(res != FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS);
-+    p_Scheme->netEnvParams.unitIds[1] = res;
-+
-+    /* Configures scheme's next engine parameters*/
-+    p_Scheme->nextEngine = e_FM_PCD_CC;
-+    p_Scheme->kgNextEngineParams.cc.h_CcTree = h_CcTree;
-+    p_Scheme->kgNextEngineParams.cc.grpId = groupId;
-+    p_Scheme->useHash = TRUE;
-+
-+    /* Configures scheme's key*/
-+    if (ipv4 == TRUE)
-+    {
-+        p_Scheme->keyExtractAndHashParams.numOfUsedExtracts = 4;
-+        p_Scheme->keyExtractAndHashParams.extractArray[0].type =
-+                e_FM_PCD_EXTRACT_BY_HDR;
-+        p_Scheme->keyExtractAndHashParams.extractArray[0].extractByHdr.type =
-+                e_FM_PCD_EXTRACT_FULL_FIELD;
-+        p_Scheme->keyExtractAndHashParams.extractArray[0].extractByHdr.hdr =
-+                HEADER_TYPE_IPv4;
-+        p_Scheme->keyExtractAndHashParams.extractArray[0].extractByHdr.extractByHdrType.fullField.ipv4 =
-+                NET_HEADER_FIELD_IPv4_DST_IP;
-+        p_Scheme->keyExtractAndHashParams.extractArray[1].type =
-+                e_FM_PCD_EXTRACT_BY_HDR;
-+        p_Scheme->keyExtractAndHashParams.extractArray[1].extractByHdr.type =
-+                e_FM_PCD_EXTRACT_FULL_FIELD;
-+        p_Scheme->keyExtractAndHashParams.extractArray[1].extractByHdr.hdr =
-+                HEADER_TYPE_IPv4;
-+        p_Scheme->keyExtractAndHashParams.extractArray[1].extractByHdr.extractByHdrType.fullField.ipv4 =
-+                NET_HEADER_FIELD_IPv4_SRC_IP;
-+        p_Scheme->keyExtractAndHashParams.extractArray[2].type =
-+                e_FM_PCD_EXTRACT_BY_HDR;
-+        p_Scheme->keyExtractAndHashParams.extractArray[2].extractByHdr.type =
-+                e_FM_PCD_EXTRACT_FULL_FIELD;
-+        p_Scheme->keyExtractAndHashParams.extractArray[2].extractByHdr.hdr =
-+                HEADER_TYPE_IPv4;
-+        p_Scheme->keyExtractAndHashParams.extractArray[2].extractByHdr.extractByHdrType.fullField.ipv4 =
-+                NET_HEADER_FIELD_IPv4_PROTO;
-+        p_Scheme->keyExtractAndHashParams.extractArray[3].type =
-+                e_FM_PCD_EXTRACT_BY_HDR;
-+        p_Scheme->keyExtractAndHashParams.extractArray[3].extractByHdr.hdr =
-+                HEADER_TYPE_IPv4;
-+        p_Scheme->keyExtractAndHashParams.extractArray[3].extractByHdr.type =
-+                e_FM_PCD_EXTRACT_FROM_HDR;
-+        p_Scheme->keyExtractAndHashParams.extractArray[3].extractByHdr.ignoreProtocolValidation =
-+                FALSE;
-+        p_Scheme->keyExtractAndHashParams.extractArray[3].extractByHdr.extractByHdrType.fromHdr.size =
-+                2;
-+        p_Scheme->keyExtractAndHashParams.extractArray[3].extractByHdr.extractByHdrType.fromHdr.offset =
-+                4;
-+    }
-+    else /* IPv6 */
-+    {
-+        p_Scheme->keyExtractAndHashParams.numOfUsedExtracts = 3;
-+        p_Scheme->keyExtractAndHashParams.extractArray[0].type =
-+                e_FM_PCD_EXTRACT_BY_HDR;
-+        p_Scheme->keyExtractAndHashParams.extractArray[0].extractByHdr.type =
-+                e_FM_PCD_EXTRACT_FULL_FIELD;
-+        p_Scheme->keyExtractAndHashParams.extractArray[0].extractByHdr.hdr =
-+                HEADER_TYPE_IPv6;
-+        p_Scheme->keyExtractAndHashParams.extractArray[0].extractByHdr.extractByHdrType.fullField.ipv6 =
-+                NET_HEADER_FIELD_IPv6_DST_IP;
-+        p_Scheme->keyExtractAndHashParams.extractArray[1].type =
-+                e_FM_PCD_EXTRACT_BY_HDR;
-+        p_Scheme->keyExtractAndHashParams.extractArray[1].extractByHdr.type =
-+                e_FM_PCD_EXTRACT_FULL_FIELD;
-+        p_Scheme->keyExtractAndHashParams.extractArray[1].extractByHdr.hdr =
-+                HEADER_TYPE_IPv6;
-+        p_Scheme->keyExtractAndHashParams.extractArray[1].extractByHdr.extractByHdrType.fullField.ipv6 =
-+                NET_HEADER_FIELD_IPv6_SRC_IP;
-+        p_Scheme->keyExtractAndHashParams.extractArray[2].type =
-+                e_FM_PCD_EXTRACT_BY_HDR;
-+        p_Scheme->keyExtractAndHashParams.extractArray[2].extractByHdr.hdr =
-+                HEADER_TYPE_USER_DEFINED_SHIM2;
-+        p_Scheme->keyExtractAndHashParams.extractArray[2].extractByHdr.type =
-+                e_FM_PCD_EXTRACT_FROM_HDR;
-+        p_Scheme->keyExtractAndHashParams.extractArray[2].extractByHdr.extractByHdrType.fromHdr.size =
-+                4;
-+        p_Scheme->keyExtractAndHashParams.extractArray[2].extractByHdr.extractByHdrType.fromHdr.offset =
-+                4;
-+        p_Scheme->keyExtractAndHashParams.extractArray[2].extractByHdr.ignoreProtocolValidation =
-+                TRUE;
-+    }
-+
-+    p_Scheme->keyExtractAndHashParams.privateDflt0 = 0x01020304;
-+    p_Scheme->keyExtractAndHashParams.privateDflt1 = 0x11121314;
-+    p_Scheme->keyExtractAndHashParams.numOfUsedDflts =
-+            FM_PCD_KG_NUM_OF_DEFAULT_GROUPS;
-+    for (j = 0; j < FM_PCD_KG_NUM_OF_DEFAULT_GROUPS; j++)
-+    {
-+        p_Scheme->keyExtractAndHashParams.dflts[j].type =
-+                (e_FmPcdKgKnownFieldsDfltTypes)j; /* all types */
-+        p_Scheme->keyExtractAndHashParams.dflts[j].dfltSelect =
-+                e_FM_PCD_KG_DFLT_GBL_0;
-+    }
-+}
-+
-+static t_Error IpReassemblyStats(t_FmPcdManip *p_Manip,
-+                                 t_FmPcdManipReassemIpStats *p_Stats)
-+{
-+    ASSERT_COND(p_Manip);
-+    ASSERT_COND(p_Stats);
-+    ASSERT_COND(p_Manip->reassmParams.p_ReassCommonTbl);
-+
-+    p_Stats->timeout =
-+            GET_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->totalTimeOutCounter);
-+    p_Stats->rfdPoolBusy =
-+            GET_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->totalRfdPoolBusyCounter);
-+    p_Stats->internalBufferBusy =
-+            GET_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->totalInternalBufferBusy);
-+    p_Stats->externalBufferBusy =
-+            GET_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->totalExternalBufferBusy);
-+    p_Stats->sgFragments =
-+            GET_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->totalSgFragmentCounter);
-+    p_Stats->dmaSemaphoreDepletion =
-+            GET_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->totalDmaSemaphoreDepletionCounter);
-+#if (DPAA_VERSION >= 11)
-+    p_Stats->nonConsistentSp =
-+            GET_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->totalNCSPCounter);
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    if (p_Manip->reassmParams.ip.p_Ipv4ReassTbl)
-+    {
-+        p_Stats->specificHdrStatistics[0].successfullyReassembled =
-+                GET_UINT32(p_Manip->reassmParams.ip.p_Ipv4ReassTbl->totalSuccessfullyReasmFramesCounter);
-+        p_Stats->specificHdrStatistics[0].validFragments =
-+                GET_UINT32(p_Manip->reassmParams.ip.p_Ipv4ReassTbl->totalValidFragmentCounter);
-+        p_Stats->specificHdrStatistics[0].processedFragments =
-+                GET_UINT32(p_Manip->reassmParams.ip.p_Ipv4ReassTbl->totalProcessedFragCounter);
-+        p_Stats->specificHdrStatistics[0].malformedFragments =
-+                GET_UINT32(p_Manip->reassmParams.ip.p_Ipv4ReassTbl->totalMalformdFragCounter);
-+        p_Stats->specificHdrStatistics[0].autoLearnBusy =
-+                GET_UINT32(p_Manip->reassmParams.ip.p_Ipv4ReassTbl->totalSetBusyCounter);
-+        p_Stats->specificHdrStatistics[0].discardedFragments =
-+                GET_UINT32(p_Manip->reassmParams.ip.p_Ipv4ReassTbl->totalDiscardedFragsCounter);
-+        p_Stats->specificHdrStatistics[0].moreThan16Fragments =
-+                GET_UINT32(p_Manip->reassmParams.ip.p_Ipv4ReassTbl->totalMoreThan16FramesCounter);
-+    }
-+    if (p_Manip->reassmParams.ip.p_Ipv6ReassTbl)
-+    {
-+        p_Stats->specificHdrStatistics[1].successfullyReassembled =
-+                GET_UINT32(p_Manip->reassmParams.ip.p_Ipv6ReassTbl->totalSuccessfullyReasmFramesCounter);
-+        p_Stats->specificHdrStatistics[1].validFragments =
-+                GET_UINT32(p_Manip->reassmParams.ip.p_Ipv6ReassTbl->totalValidFragmentCounter);
-+        p_Stats->specificHdrStatistics[1].processedFragments =
-+                GET_UINT32(p_Manip->reassmParams.ip.p_Ipv6ReassTbl->totalProcessedFragCounter);
-+        p_Stats->specificHdrStatistics[1].malformedFragments =
-+                GET_UINT32(p_Manip->reassmParams.ip.p_Ipv6ReassTbl->totalMalformdFragCounter);
-+        p_Stats->specificHdrStatistics[1].autoLearnBusy =
-+                GET_UINT32(p_Manip->reassmParams.ip.p_Ipv6ReassTbl->totalSetBusyCounter);
-+        p_Stats->specificHdrStatistics[1].discardedFragments =
-+                GET_UINT32(p_Manip->reassmParams.ip.p_Ipv6ReassTbl->totalDiscardedFragsCounter);
-+        p_Stats->specificHdrStatistics[1].moreThan16Fragments =
-+                GET_UINT32(p_Manip->reassmParams.ip.p_Ipv6ReassTbl->totalMoreThan16FramesCounter);
-+    }
-+    return E_OK;
-+}
-+
-+static t_Error IpFragmentationStats(t_FmPcdManip *p_Manip,
-+                                    t_FmPcdManipFragIpStats *p_Stats)
-+{
-+    t_AdOfTypeContLookup *p_Ad;
-+
-+    ASSERT_COND(p_Manip);
-+    ASSERT_COND(p_Stats);
-+    ASSERT_COND(p_Manip->h_Ad);
-+    ASSERT_COND(p_Manip->fragParams.p_Frag);
-+
-+    p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Ad;
-+
-+    p_Stats->totalFrames = GET_UINT32(p_Ad->gmask);
-+    p_Stats->fragmentedFrames = GET_UINT32(p_Manip->fragParams.p_Frag->ccAdBase)
-+            & 0x00ffffff;
-+    p_Stats->generatedFragments =
-+            GET_UINT32(p_Manip->fragParams.p_Frag->matchTblPtr);
-+
-+    return E_OK;
-+}
-+
-+static t_Error IpFragmentation(t_FmPcdManipFragIpParams *p_ManipParams,
-+                               t_FmPcdManip *p_Manip)
-+{
-+    uint32_t pcAndOffsetsReg = 0, ccAdBaseReg = 0, gmaskReg = 0;
-+    t_FmPcd *p_FmPcd;
-+#if (DPAA_VERSION == 10)
-+    t_Error err = E_OK;
-+#endif /* (DPAA_VERSION == 10) */
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->h_Ad, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_ManipParams->sizeForFragmentation != 0xFFFF,
-+                              E_INVALID_VALUE);
-+
-+    p_FmPcd = p_Manip->h_FmPcd;
-+    /* Allocation of fragmentation Action Descriptor */
-+    p_Manip->fragParams.p_Frag = (t_AdOfTypeContLookup *)FM_MURAM_AllocMem(
-+            p_FmPcd->h_FmMuram, FM_PCD_CC_AD_ENTRY_SIZE,
-+            FM_PCD_CC_AD_TABLE_ALIGN);
-+    if (!p_Manip->fragParams.p_Frag)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                     ("MURAM alloc for Fragmentation table descriptor"));
-+    MemSet8(p_Manip->fragParams.p_Frag, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    /* Prepare the third Ad register (pcAndOffsets)- OperationCode */
-+    pcAndOffsetsReg = (uint32_t)HMAN_OC_IP_FRAGMENTATION;
-+
-+    /* Prepare the first Ad register (ccAdBase) - Don't frag action and Action descriptor type*/
-+    ccAdBaseReg = FM_PCD_AD_CONT_LOOKUP_TYPE;
-+    ccAdBaseReg |= (p_ManipParams->dontFragAction
-+            << FM_PCD_MANIP_IP_FRAG_DF_SHIFT);
-+
-+
-+    /* Set Scatter/Gather BPid */
-+    if (p_ManipParams->sgBpidEn)
-+    {
-+        ccAdBaseReg |= FM_PCD_MANIP_IP_FRAG_SG_BDID_EN;
-+        pcAndOffsetsReg |= ((p_ManipParams->sgBpid
-+                << FM_PCD_MANIP_IP_FRAG_SG_BDID_SHIFT)
-+                & FM_PCD_MANIP_IP_FRAG_SG_BDID_MASK);
-+    }
-+
-+    /* Prepare the first Ad register (gmask) - scratch buffer pool id and Pointer to fragment ID */
-+    gmaskReg = (uint32_t)(XX_VirtToPhys(UINT_TO_PTR(p_FmPcd->ipv6FrameIdAddr))
-+            - p_FmPcd->physicalMuramBase);
-+#if (DPAA_VERSION == 10)
-+    gmaskReg |= p_ManipParams->scratchBpid << FM_PCD_MANIP_IP_FRAG_SCRATCH_BPID;
-+#else
-+    gmaskReg |= (0xFF) << FM_PCD_MANIP_IP_FRAG_SCRATCH_BPID;
-+#endif /* (DPAA_VERSION == 10) */
-+
-+    /* Set all Ad registers */
-+    WRITE_UINT32(p_Manip->fragParams.p_Frag->pcAndOffsets, pcAndOffsetsReg);
-+    WRITE_UINT32(p_Manip->fragParams.p_Frag->ccAdBase, ccAdBaseReg);
-+    WRITE_UINT32(p_Manip->fragParams.p_Frag->gmask, gmaskReg);
-+
-+    /* Saves user's fragmentation manipulation parameters */
-+    p_Manip->frag = TRUE;
-+    p_Manip->sizeForFragmentation = p_ManipParams->sizeForFragmentation;
-+
-+#if (DPAA_VERSION == 10)
-+    p_Manip->fragParams.scratchBpid = p_ManipParams->scratchBpid;
-+
-+    /* scratch buffer pool initialization */
-+    if ((err = FmPcdFragHcScratchPoolFill((t_Handle)p_FmPcd, p_ManipParams->scratchBpid)) != E_OK)
-+    {
-+        FM_MURAM_FreeMem(p_FmPcd->h_FmMuram, p_Manip->fragParams.p_Frag);
-+        p_Manip->fragParams.p_Frag = NULL;
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+#endif /* (DPAA_VERSION == 10) */
-+
-+    return E_OK;
-+}
-+
-+static t_Error IPManip(t_FmPcdManip *p_Manip)
-+{
-+    t_Error err = E_OK;
-+    t_FmPcd *p_FmPcd;
-+    t_AdOfTypeContLookup *p_Ad;
-+    uint32_t tmpReg32 = 0, tmpRegNia = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip, E_INVALID_HANDLE);
-+    p_FmPcd = p_Manip->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+
-+    p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Ad;
-+
-+    tmpReg32 = FM_PCD_MANIP_IP_NO_FRAGMENTATION;
-+    if (p_Manip->frag == TRUE)
-+    {
-+        tmpRegNia = (uint32_t)(XX_VirtToPhys(p_Manip->fragParams.p_Frag)
-+                - (p_FmPcd->physicalMuramBase));
-+        tmpReg32 = (uint32_t)p_Manip->sizeForFragmentation
-+                << FM_PCD_MANIP_IP_MTU_SHIFT;
-+    }
-+
-+    tmpRegNia |= FM_PCD_AD_CONT_LOOKUP_TYPE;
-+    tmpReg32 |= HMAN_OC_IP_MANIP;
-+
-+#if (DPAA_VERSION >= 11)
-+    tmpRegNia |= FM_PCD_MANIP_IP_CNIA;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    WRITE_UINT32(p_Ad->pcAndOffsets, tmpReg32);
-+    WRITE_UINT32(p_Ad->ccAdBase, tmpRegNia);
-+    WRITE_UINT32(p_Ad->gmask, 0);
-+    /* Total frame counter - MUST be initialized to zero.*/
-+
-+    return err;
-+}
-+
-+static t_Error UpdateInitIpFrag(t_Handle h_FmPcd, t_Handle h_PcdParams,
-+                                t_Handle h_FmPort, t_FmPcdManip *p_Manip,
-+                                t_Handle h_Ad, bool validate)
-+{
-+    t_FmPortGetSetCcParams fmPortGetSetCcParams;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Manip->opcode == HMAN_OC_IP_FRAGMENTATION),
-+                              E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(h_FmPort, E_INVALID_HANDLE);
-+
-+    UNUSED(h_FmPcd);
-+    UNUSED(h_Ad);
-+    UNUSED(h_PcdParams);
-+    UNUSED(validate);
-+    UNUSED(p_Manip);
-+
-+    fmPortGetSetCcParams.setCcParams.type = 0;
-+    fmPortGetSetCcParams.getCcParams.type = MANIP_EXTRA_SPACE;
-+    if ((err = FmPortGetSetCcParams(h_FmPort, &fmPortGetSetCcParams)) != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    if (!fmPortGetSetCcParams.getCcParams.internalBufferOffset)
-+        DBG(WARNING, ("manipExtraSpace must be larger than '0'"));
-+
-+    return E_OK;
-+}
-+
-+static t_Error IPSecManip(t_FmPcdManipParams *p_ManipParams,
-+                          t_FmPcdManip *p_Manip)
-+{
-+    t_AdOfTypeContLookup *p_Ad;
-+    t_FmPcdManipSpecialOffloadIPSecParams *p_IPSecParams;
-+    t_Error err = E_OK;
-+    uint32_t tmpReg32 = 0;
-+    uint32_t power;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_ManipParams, E_INVALID_HANDLE);
-+
-+    p_IPSecParams = &p_ManipParams->u.specialOffload.u.ipsec;
-+
-+    SANITY_CHECK_RETURN_ERROR(
-+            !p_IPSecParams->variableIpHdrLen || p_IPSecParams->decryption,
-+            E_INVALID_VALUE);
-+    SANITY_CHECK_RETURN_ERROR(
-+            !p_IPSecParams->variableIpVersion || !p_IPSecParams->decryption,
-+            E_INVALID_VALUE);
-+    SANITY_CHECK_RETURN_ERROR(
-+            !p_IPSecParams->variableIpVersion || p_IPSecParams->outerIPHdrLen,
-+            E_INVALID_VALUE);
-+    SANITY_CHECK_RETURN_ERROR(
-+            !p_IPSecParams->arwSize || p_IPSecParams->arwAddr,
-+            E_INVALID_VALUE);
-+    SANITY_CHECK_RETURN_ERROR(
-+            !p_IPSecParams->arwSize || p_IPSecParams->decryption,
-+            E_INVALID_VALUE);
-+    SANITY_CHECK_RETURN_ERROR((p_IPSecParams->arwSize % 16) == 0, E_INVALID_VALUE);
-+
-+    p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Ad;
-+
-+    tmpReg32 |= FM_PCD_AD_CONT_LOOKUP_TYPE;
-+    tmpReg32 |= (p_IPSecParams->decryption) ? FM_PCD_MANIP_IPSEC_DEC : 0;
-+    tmpReg32 |= (p_IPSecParams->ecnCopy) ? FM_PCD_MANIP_IPSEC_ECN_EN : 0;
-+    tmpReg32 |= (p_IPSecParams->dscpCopy) ? FM_PCD_MANIP_IPSEC_DSCP_EN : 0;
-+    tmpReg32 |=
-+            (p_IPSecParams->variableIpHdrLen) ? FM_PCD_MANIP_IPSEC_VIPL_EN : 0;
-+    tmpReg32 |=
-+            (p_IPSecParams->variableIpVersion) ? FM_PCD_MANIP_IPSEC_VIPV_EN : 0;
-+    if (p_IPSecParams->arwSize)
-+        tmpReg32 |= (uint32_t)((XX_VirtToPhys(UINT_TO_PTR(p_IPSecParams->arwAddr))-FM_MM_MURAM)
-+                & (FM_MURAM_SIZE-1));
-+    WRITE_UINT32(p_Ad->ccAdBase, tmpReg32);
-+
-+    tmpReg32 = 0;
-+    if (p_IPSecParams->arwSize) {
-+        NEXT_POWER_OF_2((p_IPSecParams->arwSize + 32), power);
-+        LOG2(power, power);
-+        tmpReg32 = (p_IPSecParams->arwSize | (power - 5)) << FM_PCD_MANIP_IPSEC_ARW_SIZE_SHIFT;
-+    }
-+
-+    if (p_ManipParams->h_NextManip)
-+        tmpReg32 |=
-+                (uint32_t)(XX_VirtToPhys(((t_FmPcdManip *)p_ManipParams->h_NextManip)->h_Ad)-
-+                        (((t_FmPcd *)p_Manip->h_FmPcd)->physicalMuramBase)) >> 4;
-+    WRITE_UINT32(p_Ad->matchTblPtr, tmpReg32);
-+
-+    tmpReg32 = HMAN_OC_IPSEC_MANIP;
-+    tmpReg32 |= p_IPSecParams->outerIPHdrLen
-+            << FM_PCD_MANIP_IPSEC_IP_HDR_LEN_SHIFT;
-+    if (p_ManipParams->h_NextManip)
-+        tmpReg32 |= FM_PCD_MANIP_IPSEC_NADEN;
-+    WRITE_UINT32(p_Ad->pcAndOffsets, tmpReg32);
-+
-+    return err;
-+}
-+
-+static t_Error SetCapwapReassmManip(t_FmPcdManip *p_Manip)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)p_Manip->h_FmPcd;
-+
-+    /* Allocation if CAPWAP Action descriptor */
-+    p_Manip->reassmParams.capwap.h_Ad = (t_Handle)XX_MallocSmart(
-+            FM_PCD_CC_AD_ENTRY_SIZE, p_Manip->reassmParams.dataMemId,
-+            FM_PCD_CC_AD_TABLE_ALIGN);
-+    if (!p_Manip->reassmParams.capwap.h_Ad)
-+    {
-+        ReleaseManipHandler(p_Manip, p_FmPcd);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                     ("Allocation of CAPWAP table descriptor"));
-+    }
-+
-+    memset(p_Manip->reassmParams.capwap.h_Ad, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    /* Fill reassembly manipulation parameter in the Reassembly Action Descriptor */
-+    return FillReassmManipParams(p_Manip, HEADER_TYPE_CAPWAP);
-+}
-+
-+static void setCapwapReassmSchemeParams(t_FmPcd* p_FmPcd,
-+                                        t_FmPcdKgSchemeParams *p_Scheme,
-+                                        t_Handle h_CcTree, uint8_t groupId)
-+{
-+    uint8_t res;
-+
-+    /* Configures scheme's network environment parameters */
-+    p_Scheme->netEnvParams.numOfDistinctionUnits = 1;
-+    res = FmPcdNetEnvGetUnitId(
-+            p_FmPcd, FmPcdGetNetEnvId(p_Scheme->netEnvParams.h_NetEnv),
-+            HEADER_TYPE_USER_DEFINED_SHIM2, FALSE, 0);
-+    ASSERT_COND(res != FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS);
-+    p_Scheme->netEnvParams.unitIds[0] = res;
-+
-+    /* Configures scheme's next engine parameters*/
-+    p_Scheme->nextEngine = e_FM_PCD_CC;
-+    p_Scheme->kgNextEngineParams.cc.h_CcTree = h_CcTree;
-+    p_Scheme->kgNextEngineParams.cc.grpId = groupId;
-+    p_Scheme->useHash = TRUE;
-+
-+    /* Configures scheme's key*/
-+    p_Scheme->keyExtractAndHashParams.numOfUsedExtracts = 2;
-+    p_Scheme->keyExtractAndHashParams.extractArray[0].type =
-+            e_FM_PCD_EXTRACT_NON_HDR;
-+    p_Scheme->keyExtractAndHashParams.extractArray[0].extractNonHdr.src =
-+            e_FM_PCD_EXTRACT_FROM_PARSE_RESULT;
-+    p_Scheme->keyExtractAndHashParams.extractArray[0].extractNonHdr.action =
-+            e_FM_PCD_ACTION_NONE;
-+    p_Scheme->keyExtractAndHashParams.extractArray[0].extractNonHdr.offset = 20;
-+    p_Scheme->keyExtractAndHashParams.extractArray[0].extractNonHdr.size = 4;
-+    p_Scheme->keyExtractAndHashParams.extractArray[1].type =
-+            e_FM_PCD_EXTRACT_NON_HDR;
-+    p_Scheme->keyExtractAndHashParams.extractArray[1].extractNonHdr.src =
-+            e_FM_PCD_EXTRACT_FROM_DFLT_VALUE;
-+    p_Scheme->keyExtractAndHashParams.extractArray[1].extractNonHdr.action =
-+            e_FM_PCD_ACTION_NONE;
-+    p_Scheme->keyExtractAndHashParams.extractArray[1].extractNonHdr.offset = 0;
-+    p_Scheme->keyExtractAndHashParams.extractArray[1].extractNonHdr.size = 1;
-+
-+    p_Scheme->keyExtractAndHashParams.privateDflt0 = 0x0;
-+    p_Scheme->keyExtractAndHashParams.privateDflt1 = 0x0;
-+    p_Scheme->keyExtractAndHashParams.numOfUsedDflts = 1;
-+    p_Scheme->keyExtractAndHashParams.dflts[0].type = e_FM_PCD_KG_GENERIC_NOT_FROM_DATA;
-+    p_Scheme->keyExtractAndHashParams.dflts[0].dfltSelect = e_FM_PCD_KG_DFLT_PRIVATE_0;
-+}
-+
-+#if (DPAA_VERSION >= 11)
-+static t_Error CapwapReassemblyStats(t_FmPcdManip *p_Manip,
-+                                     t_FmPcdManipReassemCapwapStats *p_Stats)
-+{
-+    ASSERT_COND(p_Manip);
-+    ASSERT_COND(p_Stats);
-+    ASSERT_COND(p_Manip->reassmParams.p_ReassCommonTbl);
-+
-+    p_Stats->timeout =
-+            GET_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->totalTimeOutCounter);
-+    p_Stats->rfdPoolBusy =
-+            GET_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->totalRfdPoolBusyCounter);
-+    p_Stats->internalBufferBusy =
-+            GET_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->totalInternalBufferBusy);
-+    p_Stats->externalBufferBusy =
-+            GET_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->totalExternalBufferBusy);
-+    p_Stats->sgFragments =
-+            GET_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->totalSgFragmentCounter);
-+    p_Stats->dmaSemaphoreDepletion =
-+            GET_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->totalDmaSemaphoreDepletionCounter);
-+    p_Stats->exceedMaxReassemblyFrameLen =
-+            GET_UINT32(p_Manip->reassmParams.p_ReassCommonTbl->totalNCSPCounter);
-+
-+    p_Stats->successfullyReassembled =
-+            GET_UINT32(p_Manip->reassmParams.capwap.p_ReassTbl->totalSuccessfullyReasmFramesCounter);
-+    p_Stats->validFragments =
-+            GET_UINT32(p_Manip->reassmParams.capwap.p_ReassTbl->totalValidFragmentCounter);
-+    p_Stats->processedFragments =
-+            GET_UINT32(p_Manip->reassmParams.capwap.p_ReassTbl->totalProcessedFragCounter);
-+    p_Stats->malformedFragments =
-+            GET_UINT32(p_Manip->reassmParams.capwap.p_ReassTbl->totalMalformdFragCounter);
-+    p_Stats->autoLearnBusy =
-+            GET_UINT32(p_Manip->reassmParams.capwap.p_ReassTbl->totalSetBusyCounter);
-+    p_Stats->discardedFragments =
-+            GET_UINT32(p_Manip->reassmParams.capwap.p_ReassTbl->totalDiscardedFragsCounter);
-+    p_Stats->moreThan16Fragments =
-+            GET_UINT32(p_Manip->reassmParams.capwap.p_ReassTbl->totalMoreThan16FramesCounter);
-+
-+    return E_OK;
-+}
-+
-+static t_Error CapwapFragmentationStats(t_FmPcdManip *p_Manip,
-+		t_FmPcdManipFragCapwapStats *p_Stats)
-+{
-+	t_AdOfTypeContLookup *p_Ad;
-+
-+	ASSERT_COND(p_Manip);
-+	ASSERT_COND(p_Stats);
-+	ASSERT_COND(p_Manip->h_Ad);
-+	ASSERT_COND(p_Manip->fragParams.p_Frag);
-+
-+	p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Ad;
-+
-+	p_Stats->totalFrames = GET_UINT32(p_Ad->gmask);
-+
-+	return E_OK;
-+}
-+
-+static t_Error CapwapReassembly(t_FmPcdManipReassemParams *p_ManipReassmParams,
-+                                t_FmPcdManip *p_Manip)
-+{
-+    uint32_t maxSetNumber = 10000;
-+    t_FmPcdManipReassemCapwapParams reassmManipParams =
-+            p_ManipReassmParams->u.capwapReassem;
-+    t_Error res;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->h_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(((t_FmPcd *)p_Manip->h_FmPcd)->h_Hc,
-+                              E_INVALID_HANDLE);
-+
-+    /* Check validation of user's parameter.*/
-+    if ((reassmManipParams.timeoutThresholdForReassmProcess < 1000)
-+            || (reassmManipParams.timeoutThresholdForReassmProcess > 8000000))
-+        RETURN_ERROR(
-+                MAJOR, E_INVALID_VALUE,
-+                ("timeoutThresholdForReassmProcess should be 1msec - 8sec"));
-+    /* It is recommended that the total number of entries in this table (number of sets * number of ways)
-+     will be twice the number of frames that are expected to be reassembled simultaneously.*/
-+    if (reassmManipParams.maxNumFramesInProcess
-+            > (reassmManipParams.maxNumFramesInProcess * maxSetNumber / 2))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("maxNumFramesInProcess has to be less than (maximun set number * number of ways / 2)"));
-+
-+    /* Saves user's reassembly manipulation parameters */
-+    p_Manip->reassmParams.capwap.relativeSchemeId =
-+            reassmManipParams.relativeSchemeId;
-+    p_Manip->reassmParams.capwap.numOfFramesPerHashEntry =
-+            reassmManipParams.numOfFramesPerHashEntry;
-+    p_Manip->reassmParams.capwap.maxRessembledsSize =
-+            reassmManipParams.maxReassembledFrameLength;
-+    p_Manip->reassmParams.maxNumFramesInProcess =
-+            reassmManipParams.maxNumFramesInProcess;
-+    p_Manip->reassmParams.timeOutMode = reassmManipParams.timeOutMode;
-+    p_Manip->reassmParams.fqidForTimeOutFrames =
-+            reassmManipParams.fqidForTimeOutFrames;
-+    p_Manip->reassmParams.timeoutThresholdForReassmProcess =
-+            reassmManipParams.timeoutThresholdForReassmProcess;
-+    p_Manip->reassmParams.dataMemId = reassmManipParams.dataMemId;
-+    p_Manip->reassmParams.dataLiodnOffset = reassmManipParams.dataLiodnOffset;
-+
-+    /* Creates and initializes the Reassembly common parameter table */
-+    CreateReassCommonTable(p_Manip);
-+
-+    res = SetCapwapReassmManip(p_Manip);
-+    if (res != E_OK)
-+        return res;
-+
-+    return E_OK;
-+}
-+
-+static t_Error CapwapFragmentation(t_FmPcdManipFragCapwapParams *p_ManipParams,
-+                                   t_FmPcdManip *p_Manip)
-+{
-+    t_FmPcd *p_FmPcd;
-+    t_AdOfTypeContLookup *p_Ad;
-+    uint32_t pcAndOffsetsReg = 0, ccAdBaseReg = 0, gmaskReg = 0;
-+    uint32_t tmpReg32 = 0, tmpRegNia = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip->h_Ad, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_ManipParams->sizeForFragmentation != 0xFFFF,
-+                              E_INVALID_VALUE);
-+    p_FmPcd = p_Manip->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+
-+    /* Allocation of fragmentation Action Descriptor */
-+    p_Manip->fragParams.p_Frag = (t_AdOfTypeContLookup *)FM_MURAM_AllocMem(
-+            p_FmPcd->h_FmMuram, FM_PCD_CC_AD_ENTRY_SIZE,
-+            FM_PCD_CC_AD_TABLE_ALIGN);
-+    if (!p_Manip->fragParams.p_Frag)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                     ("MURAM alloc for Fragmentation table descriptor"));
-+    MemSet8(p_Manip->fragParams.p_Frag, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    /* Prepare the third Ad register (pcAndOffsets)- OperationCode */
-+    pcAndOffsetsReg = (uint32_t)HMAN_OC_CAPWAP_FRAGMENTATION;
-+
-+    /* Prepare the first Ad register (ccAdBase) - Don't frag action and Action descriptor type*/
-+    ccAdBaseReg = FM_PCD_AD_CONT_LOOKUP_TYPE;
-+    ccAdBaseReg |=
-+            (p_ManipParams->compressModeEn) ? FM_PCD_MANIP_CAPWAP_FRAG_COMPRESS_EN :
-+                    0;
-+
-+    /* Set Scatter/Gather BPid */
-+    if (p_ManipParams->sgBpidEn)
-+    {
-+        ccAdBaseReg |= FM_PCD_MANIP_CAPWAP_FRAG_SG_BDID_EN;
-+        pcAndOffsetsReg |= ((p_ManipParams->sgBpid
-+                << FM_PCD_MANIP_CAPWAP_FRAG_SG_BDID_SHIFT)
-+                & FM_PCD_MANIP_CAPWAP_FRAG_SG_BDID_MASK);
-+    }
-+
-+    /* Prepare the first Ad register (gmask) - scratch buffer pool id and Pointer to fragment ID */
-+    gmaskReg = (uint32_t)(XX_VirtToPhys(UINT_TO_PTR(p_FmPcd->capwapFrameIdAddr))
-+            - p_FmPcd->physicalMuramBase);
-+    gmaskReg |= (0xFF) << FM_PCD_MANIP_IP_FRAG_SCRATCH_BPID;
-+
-+    /* Set all Ad registers */
-+    WRITE_UINT32(p_Manip->fragParams.p_Frag->pcAndOffsets, pcAndOffsetsReg);
-+    WRITE_UINT32(p_Manip->fragParams.p_Frag->ccAdBase, ccAdBaseReg);
-+    WRITE_UINT32(p_Manip->fragParams.p_Frag->gmask, gmaskReg);
-+
-+    /* Saves user's fragmentation manipulation parameters */
-+    p_Manip->frag = TRUE;
-+    p_Manip->sizeForFragmentation = p_ManipParams->sizeForFragmentation;
-+
-+    p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Ad;
-+
-+    tmpRegNia = (uint32_t)(XX_VirtToPhys(p_Manip->fragParams.p_Frag)
-+            - (p_FmPcd->physicalMuramBase));
-+    tmpReg32 = (uint32_t)p_Manip->sizeForFragmentation
-+            << FM_PCD_MANIP_CAPWAP_FRAG_CHECK_MTU_SHIFT;
-+
-+    tmpRegNia |= FM_PCD_AD_CONT_LOOKUP_TYPE;
-+    tmpReg32 |= HMAN_OC_CAPWAP_FRAG_CHECK;
-+
-+    tmpRegNia |= FM_PCD_MANIP_CAPWAP_FRAG_CHECK_CNIA;
-+
-+    WRITE_UINT32(p_Ad->pcAndOffsets, tmpReg32);
-+    WRITE_UINT32(p_Ad->ccAdBase, tmpRegNia);
-+    WRITE_UINT32(p_Ad->gmask, 0);
-+    /* Total frame counter - MUST be initialized to zero.*/
-+
-+    return E_OK;
-+}
-+
-+static t_Error UpdateInitCapwapFrag(t_Handle h_FmPcd, t_Handle h_PcdParams,
-+                                    t_Handle h_FmPort, t_FmPcdManip *p_Manip,
-+                                    t_Handle h_Ad, bool validate)
-+{
-+    t_FmPortGetSetCcParams fmPortGetSetCcParams;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Manip->opcode == HMAN_OC_CAPWAP_FRAGMENTATION),
-+                              E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(h_FmPort, E_INVALID_HANDLE);
-+
-+    UNUSED(h_FmPcd);
-+    UNUSED(h_Ad);
-+    UNUSED(h_PcdParams);
-+    UNUSED(validate);
-+    UNUSED(p_Manip);
-+
-+    fmPortGetSetCcParams.setCcParams.type = 0;
-+    fmPortGetSetCcParams.getCcParams.type = MANIP_EXTRA_SPACE;
-+    if ((err = FmPortGetSetCcParams(h_FmPort, &fmPortGetSetCcParams)) != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    if (!fmPortGetSetCcParams.getCcParams.internalBufferOffset)
-+        DBG(WARNING, ("manipExtraSpace must be larger than '0'"));
-+
-+    return E_OK;
-+}
-+
-+static t_Error CapwapManip(t_FmPcdManipParams *p_ManipParams,
-+                           t_FmPcdManip *p_Manip)
-+{
-+    t_AdOfTypeContLookup *p_Ad;
-+    t_FmPcdManipSpecialOffloadCapwapParams *p_Params;
-+    t_Error err = E_OK;
-+    uint32_t tmpReg32 = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_ManipParams, E_INVALID_HANDLE);
-+
-+    p_Params = &p_ManipParams->u.specialOffload.u.capwap;
-+
-+    p_Ad = (t_AdOfTypeContLookup *)p_Manip->h_Ad;
-+    tmpReg32 |= FM_PCD_AD_CONT_LOOKUP_TYPE;
-+    tmpReg32 |= (p_Params->dtls) ? FM_PCD_MANIP_CAPWAP_DTLS : 0;
-+    /* TODO - add 'qosSrc' */
-+    WRITE_UINT32(p_Ad->ccAdBase, tmpReg32);
-+
-+    tmpReg32 = HMAN_OC_CAPWAP_MANIP;
-+    if (p_ManipParams->h_NextManip)
-+    {
-+        WRITE_UINT32(
-+                p_Ad->matchTblPtr,
-+                (uint32_t)(XX_VirtToPhys(((t_FmPcdManip *)p_ManipParams->h_NextManip)->h_Ad)- (((t_FmPcd *)p_Manip->h_FmPcd)->physicalMuramBase)) >> 4);
-+
-+        tmpReg32 |= FM_PCD_MANIP_CAPWAP_NADEN;
-+    }
-+
-+    WRITE_UINT32(p_Ad->pcAndOffsets, tmpReg32);
-+
-+    return err;
-+}
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+static t_Handle ManipOrStatsSetNode(t_Handle h_FmPcd, t_Handle *p_Params,
-+                                    bool stats)
-+{
-+    t_FmPcdManip *p_Manip;
-+    t_Error err;
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+
-+    p_Manip = (t_FmPcdManip*)XX_Malloc(sizeof(t_FmPcdManip));
-+    if (!p_Manip)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("No memory"));
-+        return NULL;
-+    }
-+    memset(p_Manip, 0, sizeof(t_FmPcdManip));
-+
-+    p_Manip->type = ((t_FmPcdManipParams *)p_Params)->type;
-+    memcpy((uint8_t*)&p_Manip->manipParams, p_Params,
-+           sizeof(p_Manip->manipParams));
-+
-+    if (!stats)
-+        err = CheckManipParamsAndSetType(p_Manip,
-+                                         (t_FmPcdManipParams *)p_Params);
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+    else
-+        err = CheckStatsParamsAndSetType(p_Manip, (t_FmPcdStatsParams *)p_Params);
-+#else /* not (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+    else
-+    {
-+        REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Statistics node!"));
-+        XX_Free(p_Manip);
-+        return NULL;
-+    }
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+    if (err)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Invalid header manipulation type"));
-+        XX_Free(p_Manip);
-+        return NULL;
-+    }
-+
-+    if ((p_Manip->opcode != HMAN_OC_IP_REASSEMBLY) && (p_Manip->opcode != HMAN_OC_CAPWAP_REASSEMBLY))
-+    {
-+        /* In Case of reassembly manipulation the reassembly action descriptor will
-+         be defines later on */
-+        if (p_Manip->muramAllocate)
-+        {
-+            p_Manip->h_Ad = (t_Handle)FM_MURAM_AllocMem(
-+                    p_FmPcd->h_FmMuram, FM_PCD_CC_AD_ENTRY_SIZE,
-+                    FM_PCD_CC_AD_TABLE_ALIGN);
-+            if (!p_Manip->h_Ad)
-+            {
-+                REPORT_ERROR(MAJOR, E_NO_MEMORY, ("MURAM alloc for Manipulation action descriptor"));
-+                ReleaseManipHandler(p_Manip, p_FmPcd);
-+                XX_Free(p_Manip);
-+                return NULL;
-+            }
-+
-+            MemSet8(p_Manip->h_Ad, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+        }
-+        else
-+        {
-+            p_Manip->h_Ad = (t_Handle)XX_Malloc(
-+                    FM_PCD_CC_AD_ENTRY_SIZE * sizeof(uint8_t));
-+            if (!p_Manip->h_Ad)
-+            {
-+                REPORT_ERROR(MAJOR, E_NO_MEMORY, ("Allocation of Manipulation action descriptor"));
-+                ReleaseManipHandler(p_Manip, p_FmPcd);
-+                XX_Free(p_Manip);
-+                return NULL;
-+            }
-+
-+            memset(p_Manip->h_Ad, 0, FM_PCD_CC_AD_ENTRY_SIZE * sizeof(uint8_t));
-+        }
-+    }
-+
-+    p_Manip->h_FmPcd = h_FmPcd;
-+
-+    return p_Manip;
-+}
-+
-+static void UpdateAdPtrOfNodesWhichPointsOnCrntMdfManip(
-+        t_FmPcdManip *p_CrntMdfManip, t_List *h_NodesLst)
-+{
-+    t_CcNodeInformation *p_CcNodeInformation;
-+    t_FmPcdCcNode *p_NodePtrOnCurrentMdfManip = NULL;
-+    t_List *p_Pos;
-+    int i = 0;
-+    t_Handle p_AdTablePtOnCrntCurrentMdfNode/*, p_AdTableNewModified*/;
-+    t_CcNodeInformation ccNodeInfo;
-+
-+    LIST_FOR_EACH(p_Pos, &p_CrntMdfManip->nodesLst)
-+    {
-+        p_CcNodeInformation = CC_NODE_F_OBJECT(p_Pos);
-+        p_NodePtrOnCurrentMdfManip =
-+                (t_FmPcdCcNode *)p_CcNodeInformation->h_CcNode;
-+
-+        ASSERT_COND(p_NodePtrOnCurrentMdfManip);
-+
-+        /* Search in the previous node which exact index points on this current modified node for getting AD */
-+        for (i = 0; i < p_NodePtrOnCurrentMdfManip->numOfKeys + 1; i++)
-+        {
-+            if (p_NodePtrOnCurrentMdfManip->keyAndNextEngineParams[i].nextEngineParams.nextEngine
-+                    == e_FM_PCD_CC)
-+            {
-+                if (p_NodePtrOnCurrentMdfManip->keyAndNextEngineParams[i].nextEngineParams.h_Manip
-+                        == (t_Handle)p_CrntMdfManip)
-+                {
-+                    if (p_NodePtrOnCurrentMdfManip->keyAndNextEngineParams[i].p_StatsObj)
-+                        p_AdTablePtOnCrntCurrentMdfNode =
-+                                p_NodePtrOnCurrentMdfManip->keyAndNextEngineParams[i].p_StatsObj->h_StatsAd;
-+                    else
-+                        p_AdTablePtOnCrntCurrentMdfNode =
-+                                PTR_MOVE(p_NodePtrOnCurrentMdfManip->h_AdTable, i*FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+                    memset(&ccNodeInfo, 0, sizeof(t_CcNodeInformation));
-+                    ccNodeInfo.h_CcNode = p_AdTablePtOnCrntCurrentMdfNode;
-+                    EnqueueNodeInfoToRelevantLst(h_NodesLst, &ccNodeInfo, NULL);
-+                }
-+            }
-+        }
-+
-+        ASSERT_COND(i != p_NodePtrOnCurrentMdfManip->numOfKeys);
-+    }
-+}
-+
-+static void BuildHmtd(uint8_t *p_Dest, uint8_t *p_Src, uint8_t *p_Hmcd,
-+                      t_FmPcd *p_FmPcd)
-+{
-+    t_Error err;
-+
-+    /* Copy the HMTD */
-+    MemCpy8(p_Dest, (uint8_t*)p_Src, 16);
-+    /* Replace the HMCT table pointer  */
-+    WRITE_UINT32(
-+            ((t_Hmtd *)p_Dest)->hmcdBasePtr,
-+            (uint32_t)(XX_VirtToPhys(p_Hmcd) - ((t_FmPcd*)p_FmPcd)->physicalMuramBase));
-+    /* Call Host Command to replace HMTD by a new HMTD */
-+    err = FmHcPcdCcDoDynamicChange(
-+            p_FmPcd->h_Hc,
-+            (uint32_t)(XX_VirtToPhys(p_Src) - p_FmPcd->physicalMuramBase),
-+            (uint32_t)(XX_VirtToPhys(p_Dest) - p_FmPcd->physicalMuramBase));
-+    if (err)
-+        REPORT_ERROR(MINOR, err, ("Failed in dynamic manip change, continued to the rest of the owners."));
-+}
-+
-+static t_Error FmPcdManipInitUpdate(t_Handle h_FmPcd, t_Handle h_PcdParams,
-+                                    t_Handle h_FmPort, t_Handle h_Manip,
-+                                    t_Handle h_Ad, bool validate, int level,
-+                                    t_Handle h_FmTree)
-+{
-+    t_FmPcdManip *p_Manip = (t_FmPcdManip *)h_Manip;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_Manip, E_INVALID_HANDLE);
-+
-+    UNUSED(level);
-+    UNUSED(h_FmTree);
-+
-+    switch (p_Manip->opcode)
-+    {
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+        case (HMAN_OC_MV_INT_FRAME_HDR_FROM_FRM_TO_BUFFER_PREFFIX):
-+        err = UpdateInitMvIntFrameHeaderFromFrameToBufferPrefix(h_FmPort,
-+                p_Manip,
-+                h_Ad,
-+                validate);
-+        break;
-+        case (HMAN_OC_INSRT_HDR_BY_TEMPL_N_OR_FRAG_AFTER):
-+        if (!p_Manip->h_Frag)
-+        break;
-+        case (HMAN_OC_CAPWAP_FRAGMENTATION):
-+        err = UpdateInitCapwapFragmentation(h_FmPort, p_Manip, h_Ad, validate, h_FmTree);
-+        break;
-+        case (HMAN_OC_CAPWAP_RMV_DTLS_IF_EXIST):
-+        if (p_Manip->h_Frag)
-+        err = UpdateInitCapwapReasm(h_FmPcd, h_FmPort, p_Manip, h_Ad, validate);
-+        break;
-+        case (HMAN_OC_CAPWAP_INDEXED_STATS):
-+        err = UpdateIndxStats(h_FmPcd, h_FmPort, p_Manip);
-+        break;
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+        case (HMAN_OC_IP_REASSEMBLY):
-+            err = UpdateInitReasm(h_FmPcd, h_PcdParams, h_FmPort, p_Manip, h_Ad,
-+                                  validate);
-+            break;
-+        case (HMAN_OC_IP_FRAGMENTATION):
-+            err = UpdateInitIpFrag(h_FmPcd, h_PcdParams, h_FmPort, p_Manip,
-+                                   h_Ad, validate);
-+            break;
-+#if (DPAA_VERSION >= 11)
-+        case (HMAN_OC_CAPWAP_FRAGMENTATION):
-+            err = UpdateInitCapwapFrag(h_FmPcd, h_PcdParams, h_FmPort, p_Manip,
-+                                       h_Ad, validate);
-+            break;
-+        case (HMAN_OC_CAPWAP_REASSEMBLY):
-+            err = UpdateInitReasm(h_FmPcd, h_PcdParams, h_FmPort, p_Manip, h_Ad,
-+                                  validate);
-+            break;
-+#endif /* (DPAA_VERSION >= 11) */
-+        default:
-+            return E_OK;
-+    }
-+
-+    return err;
-+}
-+
-+static t_Error FmPcdManipModifyUpdate(t_Handle h_Manip, t_Handle h_Ad,
-+                                      bool validate, int level,
-+                                      t_Handle h_FmTree)
-+{
-+
-+    t_FmPcdManip *p_Manip = (t_FmPcdManip *)h_Manip;
-+    t_Error err = E_OK;
-+
-+    UNUSED(level);
-+
-+    switch (p_Manip->opcode)
-+    {
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+        case (HMAN_OC_MV_INT_FRAME_HDR_FROM_FRM_TO_BUFFER_PREFFIX):
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_STATE,
-+                ("modify node with this type of manipulation  is not suppported"));
-+        case (HMAN_OC_CAPWAP_RMV_DTLS_IF_EXIST):
-+
-+        if (p_Manip->h_Frag)
-+        {
-+            if (!(p_Manip->shadowUpdateParams & NUM_OF_TASKS)
-+                    && !(p_Manip->shadowUpdateParams & OFFSET_OF_DATA)
-+                    && !(p_Manip->shadowUpdateParams & OFFSET_OF_PR))
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_STATE,
-+                    ("modify node with this type of manipulation requires manipulation be updated previously in SetPcd function"));
-+        }
-+        break;
-+        case (HMAN_OC_INSRT_HDR_BY_TEMPL_N_OR_FRAG_AFTER):
-+        if (p_Manip->h_Frag)
-+        err = UpdateModifyCapwapFragmenation(p_Manip, h_Ad, validate, h_FmTree);
-+        break;
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+        default:
-+            return E_OK;
-+    }
-+
-+    return err;
-+}
-+
-+/*****************************************************************************/
-+/*              Inter-module API routines                                    */
-+/*****************************************************************************/
-+
-+t_Error FmPcdManipUpdate(t_Handle h_FmPcd, t_Handle h_PcdParams,
-+                         t_Handle h_FmPort, t_Handle h_Manip, t_Handle h_Ad,
-+                         bool validate, int level, t_Handle h_FmTree,
-+                         bool modify)
-+{
-+    t_Error err;
-+
-+    if (!modify)
-+        err = FmPcdManipInitUpdate(h_FmPcd, h_PcdParams, h_FmPort, h_Manip,
-+                                   h_Ad, validate, level, h_FmTree);
-+    else
-+        err = FmPcdManipModifyUpdate(h_Manip, h_Ad, validate, level, h_FmTree);
-+
-+    return err;
-+}
-+
-+void FmPcdManipUpdateOwner(t_Handle h_Manip, bool add)
-+{
-+
-+    uint32_t intFlags;
-+
-+    intFlags = XX_LockIntrSpinlock(((t_FmPcdManip *)h_Manip)->h_Spinlock);
-+    if (add)
-+        ((t_FmPcdManip *)h_Manip)->owner++;
-+    else
-+    {
-+        ASSERT_COND(((t_FmPcdManip *)h_Manip)->owner);
-+        ((t_FmPcdManip *)h_Manip)->owner--;
-+    }
-+    XX_UnlockIntrSpinlock(((t_FmPcdManip *)h_Manip)->h_Spinlock, intFlags);
-+}
-+
-+t_List *FmPcdManipGetNodeLstPointedOnThisManip(t_Handle h_Manip)
-+{
-+    ASSERT_COND(h_Manip);
-+    return &((t_FmPcdManip *)h_Manip)->nodesLst;
-+}
-+
-+t_List *FmPcdManipGetSpinlock(t_Handle h_Manip)
-+{
-+    ASSERT_COND(h_Manip);
-+    return ((t_FmPcdManip *)h_Manip)->h_Spinlock;
-+}
-+
-+t_Error FmPcdManipCheckParamsForCcNextEngine(
-+        t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams,
-+        uint32_t *requiredAction)
-+{
-+    t_FmPcdManip *p_Manip;
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+    t_Error err = E_OK;
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))*/
-+    bool pointFromCc = TRUE;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcdCcNextEngineParams, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcdCcNextEngineParams->h_Manip,
-+                              E_NULL_POINTER);
-+
-+    p_Manip = (t_FmPcdManip *)(p_FmPcdCcNextEngineParams->h_Manip);
-+    *requiredAction = 0;
-+
-+    while (p_Manip)
-+    {
-+        switch (p_Manip->opcode)
-+        {
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+            case (HMAN_OC_CAPWAP_INDEXED_STATS):
-+                if (p_FmPcdCcNextEngineParams->nextEngine != e_FM_PCD_DONE)
-+                    RETURN_ERROR(MAJOR,	E_INVALID_STATE, ("For this type of header manipulation has to be nextEngine e_FM_PCD_DONE"));
-+                if (p_FmPcdCcNextEngineParams->params.enqueueParams.overrideFqid)
-+                    p_Manip->cnia = TRUE;
-+            case (HMAN_OC_CAPWAP_RMV_DTLS_IF_EXIST):
-+                *requiredAction = UPDATE_NIA_ENQ_WITHOUT_DMA;
-+            case (HMAN_OC_RMV_N_OR_INSRT_INT_FRM_HDR):
-+                p_Manip->ownerTmp++;
-+                break;
-+            case (HMAN_OC_INSRT_HDR_BY_TEMPL_N_OR_FRAG_AFTER):
-+                if ((p_FmPcdCcNextEngineParams->nextEngine != e_FM_PCD_DONE)
-+                    && !p_FmPcdCcNextEngineParams->params.enqueueParams.overrideFqid)
-+                    RETURN_ERROR(
-+                        MAJOR,
-+                        E_INVALID_STATE,
-+                        ("For this type of header manipulation has to be nextEngine e_FM_PCD_DONE with fqidForCtrlFlow FALSE"));
-+                p_Manip->ownerTmp++;
-+                break;
-+            case (HMAN_OC_MV_INT_FRAME_HDR_FROM_FRM_TO_BUFFER_PREFFIX):
-+                if ((p_FmPcdCcNextEngineParams->nextEngine != e_FM_PCD_CC)
-+                    && (FmPcdCcGetParseCode(p_FmPcdCcNextEngineParams->params.ccParams.h_CcNode)
-+                        != CC_PC_GENERIC_IC_HASH_INDEXED))
-+                    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("For this type of header manipulation next engine has to be CC and action = e_FM_PCD_ACTION_INDEXED_LOOKUP"));
-+                err = UpdateManipIc(p_FmPcdCcNextEngineParams->h_Manip,
-+                                    FmPcdCcGetOffset(p_FmPcdCcNextEngineParams->params.ccParams.h_CcNode));
-+                if (err)
-+                    RETURN_ERROR(MAJOR, err, NO_MSG);
-+                *requiredAction = UPDATE_NIA_ENQ_WITHOUT_DMA;
-+                break;
-+ #endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+            case (HMAN_OC_IP_FRAGMENTATION):
-+            case (HMAN_OC_IP_REASSEMBLY):
-+#if (DPAA_VERSION >= 11)
-+            case (HMAN_OC_CAPWAP_REASSEMBLY):
-+            case (HMAN_OC_CAPWAP_FRAGMENTATION):
-+#endif /* (DPAA_VERSION >= 11) */
-+                if (p_FmPcdCcNextEngineParams->nextEngine != e_FM_PCD_DONE)
-+                    RETURN_ERROR(
-+                            MAJOR,
-+                            E_INVALID_STATE,
-+                            ("For this type of header manipulation has to be nextEngine e_FM_PCD_DONE"));
-+                p_Manip->ownerTmp++;
-+                break;
-+            case (HMAN_OC_IPSEC_MANIP):
-+#if (DPAA_VERSION >= 11)
-+            case (HMAN_OC_CAPWAP_MANIP):
-+#endif /* (DPAA_VERSION >= 11) */
-+                p_Manip->ownerTmp++;
-+                break;
-+            case (HMAN_OC):
-+                if ((p_FmPcdCcNextEngineParams->nextEngine == e_FM_PCD_CC)
-+                        && MANIP_IS_CASCADED(p_Manip))
-+                    RETURN_ERROR(
-+                            MINOR,
-+                            E_INVALID_STATE,
-+                            ("Can't have a cascaded manipulation when and Next Engine is CC"));
-+                if (!MANIP_IS_FIRST(p_Manip) && pointFromCc)
-+                    RETURN_ERROR(
-+                            MAJOR,
-+                            E_INVALID_STATE,
-+                            ("h_Manip is already used and may not be shared (no sharing of non-head manip nodes)"));
-+                break;
-+            default:
-+                RETURN_ERROR(
-+                        MAJOR, E_INVALID_STATE,
-+                        ("invalid type of header manipulation for this state"));
-+        }
-+        p_Manip = p_Manip->h_NextManip;
-+        pointFromCc = FALSE;
-+    }
-+    return E_OK;
-+}
-+
-+
-+t_Error FmPcdManipCheckParamsWithCcNodeParams(t_Handle h_Manip,
-+                                              t_Handle h_FmPcdCcNode)
-+{
-+    t_FmPcdManip *p_Manip = (t_FmPcdManip *)h_Manip;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_Manip, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcdCcNode, E_INVALID_HANDLE);
-+
-+    switch (p_Manip->opcode)
-+    {
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+        case (HMAN_OC_CAPWAP_INDEXED_STATS):
-+        if (p_Manip->ownerTmp != FmPcdCcGetNumOfKeys(h_FmPcdCcNode))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("The manipulation of the type statistics flowId if exist has to be pointed by all numOfKeys"));
-+        break;
-+        case (HMAN_OC_CAPWAP_RMV_DTLS_IF_EXIST):
-+        if (p_Manip->h_Frag)
-+        {
-+            if (p_Manip->ownerTmp != FmPcdCcGetNumOfKeys(h_FmPcdCcNode))
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("The manipulation of the type remove DTLS if exist has to be pointed by all numOfKeys"));
-+            err = UpdateManipIc(h_Manip, FmPcdCcGetOffset(h_FmPcdCcNode));
-+            if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        }
-+        break;
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+        default:
-+            break;
-+    }
-+
-+    return err;
-+}
-+
-+void FmPcdManipUpdateAdResultForCc(
-+        t_Handle h_Manip, t_FmPcdCcNextEngineParams *p_CcNextEngineParams,
-+        t_Handle p_Ad, t_Handle *p_AdNewPtr)
-+{
-+    t_FmPcdManip *p_Manip = (t_FmPcdManip *)h_Manip;
-+
-+    /* This routine creates a Manip AD and can return in "p_AdNewPtr"
-+     * either the new descriptor or NULL if it writes the Manip AD into p_AD (into the match table) */
-+
-+    ASSERT_COND(p_Manip);
-+    ASSERT_COND(p_CcNextEngineParams);
-+    ASSERT_COND(p_Ad);
-+    ASSERT_COND(p_AdNewPtr);
-+
-+    FmPcdManipUpdateOwner(h_Manip, TRUE);
-+
-+    /* According to "type", either build & initialize a new AD (p_AdNew) or initialize
-+     * p_Ad ( the AD in the match table) and set p_AdNew = NULL. */
-+    switch (p_Manip->opcode)
-+    {
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+        case (HMAN_OC_RMV_N_OR_INSRT_INT_FRM_HDR):
-+        case (HMAN_OC_CAPWAP_RMV_DTLS_IF_EXIST):
-+        case (HMAN_OC_CAPWAP_INDEXED_STATS):
-+        *p_AdNewPtr = p_Manip->h_Ad;
-+        break;
-+        case (HMAN_OC_INSRT_HDR_BY_TEMPL_N_OR_FRAG_AFTER):
-+        case (HMAN_OC_CAPWAP_FRAGMENTATION):
-+        WRITE_UINT32(((t_AdOfTypeResult *)p_Ad)->fqid,
-+                ((t_AdOfTypeResult *)(p_Manip->h_Ad))->fqid);
-+        WRITE_UINT32(((t_AdOfTypeResult *)p_Ad)->plcrProfile,
-+                ((t_AdOfTypeResult *)(p_Manip->h_Ad))->plcrProfile);
-+        WRITE_UINT32(((t_AdOfTypeResult *)p_Ad)->nia,
-+                ((t_AdOfTypeResult *)(p_Manip->h_Ad))->nia);
-+        *p_AdNewPtr = NULL;
-+        break;
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+        case (HMAN_OC_IPSEC_MANIP):
-+#if (DPAA_VERSION >= 11)
-+        case (HMAN_OC_CAPWAP_MANIP):
-+#endif /* (DPAA_VERSION >= 11) */
-+            *p_AdNewPtr = p_Manip->h_Ad;
-+            break;
-+        case (HMAN_OC_IP_FRAGMENTATION):
-+#if (DPAA_VERSION >= 11)
-+        case (HMAN_OC_CAPWAP_FRAGMENTATION):
-+#endif /* (DPAA_VERSION >= 11) */
-+            if ((p_CcNextEngineParams->nextEngine == e_FM_PCD_DONE)
-+                    && (!p_CcNextEngineParams->params.enqueueParams.overrideFqid))
-+            {
-+                memcpy((uint8_t *)p_Ad, (uint8_t *)p_Manip->h_Ad,
-+                       sizeof(t_AdOfTypeContLookup));
-+#if (DPAA_VERSION >= 11)
-+                WRITE_UINT32(
-+                        ((t_AdOfTypeContLookup *)p_Ad)->ccAdBase,
-+                        GET_UINT32(((t_AdOfTypeContLookup *)p_Ad)->ccAdBase) & ~FM_PCD_MANIP_IP_CNIA);
-+#endif /* (DPAA_VERSION >= 11) */
-+                *p_AdNewPtr = NULL;
-+            }
-+            else
-+                *p_AdNewPtr = p_Manip->h_Ad;
-+            break;
-+        case (HMAN_OC_IP_REASSEMBLY):
-+            if (FmPcdManipIpReassmIsIpv6Hdr(p_Manip))
-+            {
-+                if (!p_Manip->reassmParams.ip.ipv6Assigned)
-+                {
-+                    *p_AdNewPtr = p_Manip->reassmParams.ip.h_Ipv6Ad;
-+                    p_Manip->reassmParams.ip.ipv6Assigned = TRUE;
-+                    FmPcdManipUpdateOwner(h_Manip, FALSE);
-+                }
-+                else
-+                {
-+                    *p_AdNewPtr = p_Manip->reassmParams.ip.h_Ipv4Ad;
-+                    p_Manip->reassmParams.ip.ipv6Assigned = FALSE;
-+                }
-+            }
-+            else
-+                *p_AdNewPtr = p_Manip->reassmParams.ip.h_Ipv4Ad;
-+            memcpy((uint8_t *)p_Ad, (uint8_t *)*p_AdNewPtr,
-+                   sizeof(t_AdOfTypeContLookup));
-+            *p_AdNewPtr = NULL;
-+            break;
-+#if (DPAA_VERSION >= 11)
-+        case (HMAN_OC_CAPWAP_REASSEMBLY):
-+            *p_AdNewPtr = p_Manip->reassmParams.capwap.h_Ad;
-+            memcpy((uint8_t *)p_Ad, (uint8_t *)*p_AdNewPtr,
-+                   sizeof(t_AdOfTypeContLookup));
-+            *p_AdNewPtr = NULL;
-+            break;
-+#endif /* (DPAA_VERSION >= 11) */
-+        case (HMAN_OC):
-+            /* Allocate and initialize HMTD */
-+            *p_AdNewPtr = p_Manip->h_Ad;
-+            break;
-+        default:
-+            break;
-+    }
-+}
-+
-+void FmPcdManipUpdateAdContLookupForCc(t_Handle h_Manip, t_Handle p_Ad,
-+                                       t_Handle *p_AdNewPtr,
-+                                       uint32_t adTableOffset)
-+{
-+    t_FmPcdManip *p_Manip = (t_FmPcdManip *)h_Manip;
-+
-+    /* This routine creates a Manip AD and can return in "p_AdNewPtr"
-+     * either the new descriptor or NULL if it writes the Manip AD into p_AD (into the match table) */
-+    ASSERT_COND(p_Manip);
-+
-+    FmPcdManipUpdateOwner(h_Manip, TRUE);
-+
-+    switch (p_Manip->opcode)
-+    {
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+        case (HMAN_OC_MV_INT_FRAME_HDR_FROM_FRM_TO_BUFFER_PREFFIX):
-+        WRITE_UINT32(((t_AdOfTypeContLookup *)p_Ad)->ccAdBase,
-+                ((t_AdOfTypeContLookup *)(p_Manip->h_Ad))->ccAdBase);
-+        WRITE_UINT32(
-+                ((t_AdOfTypeContLookup *)p_Ad)->matchTblPtr,
-+                ((t_AdOfTypeContLookup *)(p_Manip->h_Ad))->matchTblPtr);
-+        WRITE_UINT32(
-+                ((t_AdOfTypeContLookup *)p_Ad)->pcAndOffsets,
-+                ((t_AdOfTypeContLookup *)(p_Manip->h_Ad))->pcAndOffsets);
-+        WRITE_UINT32(((t_AdOfTypeContLookup *)p_Ad)->gmask,
-+                ((t_AdOfTypeContLookup *)(p_Manip->h_Ad))->gmask);
-+        WRITE_UINT32(
-+                ((t_AdOfTypeContLookup *)p_Ad)->ccAdBase,
-+                (GET_UINT32(((t_AdOfTypeContLookup *)p_Ad)->ccAdBase) | adTableOffset));
-+        *p_AdNewPtr = NULL;
-+        break;
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+        case (HMAN_OC):
-+            /* Initialize HMTD within the match table*/
-+            MemSet8(p_Ad, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+            /* copy the existing HMTD *//* ask Alla - memcpy??? */
-+            memcpy((uint8_t*)p_Ad, p_Manip->h_Ad, sizeof(t_Hmtd));
-+            /* update NADEN to be "1"*/
-+            WRITE_UINT16(
-+                    ((t_Hmtd *)p_Ad)->cfg,
-+                    (uint16_t)(GET_UINT16(((t_Hmtd *)p_Ad)->cfg) | HMTD_CFG_NEXT_AD_EN));
-+            /* update next action descriptor */
-+            WRITE_UINT16(((t_Hmtd *)p_Ad)->nextAdIdx,
-+                         (uint16_t)(adTableOffset >> 4));
-+            /* mark that Manip's HMTD is not used */
-+            *p_AdNewPtr = NULL;
-+            break;
-+
-+        default:
-+            break;
-+    }
-+}
-+
-+t_Error FmPcdManipBuildIpReassmScheme(t_FmPcd *p_FmPcd, t_Handle h_NetEnv,
-+                                      t_Handle h_CcTree, t_Handle h_Manip,
-+                                      bool isIpv4, uint8_t groupId)
-+{
-+    t_FmPcdManip *p_Manip = (t_FmPcdManip *)h_Manip;
-+    t_FmPcdKgSchemeParams *p_SchemeParams = NULL;
-+    t_Handle h_Scheme;
-+
-+    ASSERT_COND(p_FmPcd);
-+    ASSERT_COND(h_NetEnv);
-+    ASSERT_COND(p_Manip);
-+
-+    /* scheme was already build, no need to check for IPv6 */
-+    if (p_Manip->reassmParams.ip.h_Ipv4Scheme)
-+        return E_OK;
-+
-+    if (isIpv4) {
-+        h_Scheme = FmPcdKgGetSchemeHandle(p_FmPcd, p_Manip->reassmParams.ip.relativeSchemeId[0]);
-+        if (h_Scheme) {
-+            /* scheme was found */
-+            p_Manip->reassmParams.ip.h_Ipv4Scheme = h_Scheme;
-+            return E_OK;
-+        }
-+    } else {
-+        h_Scheme = FmPcdKgGetSchemeHandle(p_FmPcd, p_Manip->reassmParams.ip.relativeSchemeId[1]);
-+        if (h_Scheme) {
-+            /* scheme was found */
-+            p_Manip->reassmParams.ip.h_Ipv6Scheme = h_Scheme;
-+            return E_OK;
-+        }
-+    }
-+
-+     p_SchemeParams = XX_Malloc(sizeof(t_FmPcdKgSchemeParams));
-+    if (!p_SchemeParams)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                     ("Memory allocation failed for scheme"));
-+
-+    /* Configures the IPv4 or IPv6 scheme*/
-+    memset(p_SchemeParams, 0, sizeof(t_FmPcdKgSchemeParams));
-+    p_SchemeParams->netEnvParams.h_NetEnv = h_NetEnv;
-+    p_SchemeParams->id.relativeSchemeId = (uint8_t)(
-+            (isIpv4 == TRUE) ? p_Manip->reassmParams.ip.relativeSchemeId[0] :
-+                    p_Manip->reassmParams.ip.relativeSchemeId[1]);
-+    p_SchemeParams->schemeCounter.update = TRUE;
-+#if (DPAA_VERSION >= 11)
-+    p_SchemeParams->alwaysDirect = TRUE;
-+    p_SchemeParams->bypassFqidGeneration = TRUE;
-+#else
-+    p_SchemeParams->keyExtractAndHashParams.hashDistributionNumOfFqids = 1;
-+    p_SchemeParams->baseFqid = 0xFFFFFF; /*TODO- baseFqid*/
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    setIpReassmSchemeParams(p_FmPcd, p_SchemeParams, h_CcTree, isIpv4, groupId);
-+
-+    /* Sets the new scheme */
-+    if (isIpv4)
-+        p_Manip->reassmParams.ip.h_Ipv4Scheme = FM_PCD_KgSchemeSet(
-+                p_FmPcd, p_SchemeParams);
-+    else
-+        p_Manip->reassmParams.ip.h_Ipv6Scheme = FM_PCD_KgSchemeSet(
-+                p_FmPcd, p_SchemeParams);
-+
-+    XX_Free(p_SchemeParams);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmPcdManipDeleteIpReassmSchemes(t_Handle h_Manip)
-+{
-+    t_FmPcdManip *p_Manip = (t_FmPcdManip *)h_Manip;
-+
-+    ASSERT_COND(p_Manip);
-+
-+    if ((p_Manip->reassmParams.ip.h_Ipv4Scheme) &&
-+        !FmPcdKgIsSchemeHasOwners(p_Manip->reassmParams.ip.h_Ipv4Scheme))
-+        FM_PCD_KgSchemeDelete(p_Manip->reassmParams.ip.h_Ipv4Scheme);
-+
-+    if ((p_Manip->reassmParams.ip.h_Ipv6Scheme) &&
-+        !FmPcdKgIsSchemeHasOwners(p_Manip->reassmParams.ip.h_Ipv6Scheme))
-+        FM_PCD_KgSchemeDelete(p_Manip->reassmParams.ip.h_Ipv6Scheme);
-+
-+    return E_OK;
-+}
-+
-+bool FmPcdManipIpReassmIsIpv6Hdr(t_Handle h_Manip)
-+{
-+    t_FmPcdManip *p_Manip = (t_FmPcdManip *)h_Manip;
-+
-+    ASSERT_COND(p_Manip);
-+
-+    return (p_Manip->reassmParams.hdr == HEADER_TYPE_IPv6);
-+}
-+
-+t_Error FmPcdManipBuildCapwapReassmScheme(t_FmPcd *p_FmPcd, t_Handle h_NetEnv,
-+                                          t_Handle h_CcTree, t_Handle h_Manip,
-+                                          uint8_t groupId)
-+{
-+    t_FmPcdManip *p_Manip = (t_FmPcdManip *)h_Manip;
-+    t_FmPcdKgSchemeParams *p_SchemeParams = NULL;
-+
-+    ASSERT_COND(p_FmPcd);
-+    ASSERT_COND(h_NetEnv);
-+    ASSERT_COND(p_Manip);
-+
-+    /* scheme was already build, no need to check for IPv6 */
-+    if (p_Manip->reassmParams.capwap.h_Scheme)
-+        return E_OK;
-+
-+    p_SchemeParams = XX_Malloc(sizeof(t_FmPcdKgSchemeParams));
-+    if (!p_SchemeParams)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY,
-+                     ("Memory allocation failed for scheme"));
-+
-+    memset(p_SchemeParams, 0, sizeof(t_FmPcdKgSchemeParams));
-+    p_SchemeParams->netEnvParams.h_NetEnv = h_NetEnv;
-+    p_SchemeParams->id.relativeSchemeId =
-+            (uint8_t)p_Manip->reassmParams.capwap.relativeSchemeId;
-+    p_SchemeParams->schemeCounter.update = TRUE;
-+    p_SchemeParams->bypassFqidGeneration = TRUE;
-+
-+    setCapwapReassmSchemeParams(p_FmPcd, p_SchemeParams, h_CcTree, groupId);
-+
-+    p_Manip->reassmParams.capwap.h_Scheme = FM_PCD_KgSchemeSet(p_FmPcd,
-+                                                               p_SchemeParams);
-+
-+    XX_Free(p_SchemeParams);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmPcdManipDeleteCapwapReassmSchemes(t_Handle h_Manip)
-+{
-+    t_FmPcdManip *p_Manip = (t_FmPcdManip *)h_Manip;
-+
-+    ASSERT_COND(p_Manip);
-+
-+    if (p_Manip->reassmParams.capwap.h_Scheme)
-+        FM_PCD_KgSchemeDelete(p_Manip->reassmParams.capwap.h_Scheme);
-+
-+    return E_OK;
-+}
-+
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+t_Handle FmPcdManipApplSpecificBuild(void)
-+{
-+    t_FmPcdManip *p_Manip;
-+
-+    p_Manip = (t_FmPcdManip*)XX_Malloc(sizeof(t_FmPcdManip));
-+    if (!p_Manip)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("No memory"));
-+        return NULL;
-+    }
-+    memset(p_Manip, 0, sizeof(t_FmPcdManip));
-+
-+    p_Manip->opcode = HMAN_OC_MV_INT_FRAME_HDR_FROM_FRM_TO_BUFFER_PREFFIX;
-+    p_Manip->muramAllocate = FALSE;
-+
-+    p_Manip->h_Ad = (t_Handle)XX_Malloc(FM_PCD_CC_AD_ENTRY_SIZE * sizeof(uint8_t));
-+    if (!p_Manip->h_Ad)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("Allocation of Manipulation action descriptor"));
-+        XX_Free(p_Manip);
-+        return NULL;
-+    }
-+
-+    memset(p_Manip->h_Ad, 0, FM_PCD_CC_AD_ENTRY_SIZE * sizeof(uint8_t));
-+
-+    /*treatFdStatusFieldsAsErrors = TRUE hardcoded - assumption its always come after CAAM*/
-+    /*Application specific = type of flowId index, move internal frame header from data to IC,
-+     SEC errors check*/
-+    if (MvIntFrameHeaderFromFrameToBufferPrefix(p_Manip, TRUE)!= E_OK)
-+    {
-+        XX_Free(p_Manip->h_Ad);
-+        XX_Free(p_Manip);
-+        return NULL;
-+    }
-+    return p_Manip;
-+}
-+
-+bool FmPcdManipIsCapwapApplSpecific(t_Handle h_Manip)
-+{
-+    t_FmPcdManip *p_Manip = (t_FmPcdManip *)h_Manip;
-+    ASSERT_COND(h_Manip);
-+
-+    return (bool)((p_Manip->opcode == HMAN_OC_CAPWAP_RMV_DTLS_IF_EXIST) ? TRUE : FALSE);
-+}
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+/*********************** End of inter-module routines ************************/
-+
-+/****************************************/
-+/*       API Init unit functions        */
-+/****************************************/
-+
-+t_Handle FM_PCD_ManipNodeSet(t_Handle h_FmPcd,
-+                             t_FmPcdManipParams *p_ManipParams)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    t_FmPcdManip *p_Manip;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmPcd, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(p_ManipParams, E_INVALID_HANDLE, NULL);
-+
-+    p_Manip = ManipOrStatsSetNode(h_FmPcd, (t_Handle)p_ManipParams, FALSE);
-+    if (!p_Manip)
-+        return NULL;
-+
-+    if (((p_Manip->opcode == HMAN_OC_IP_REASSEMBLY)
-+            || (p_Manip->opcode == HMAN_OC_IP_FRAGMENTATION)
-+            || (p_Manip->opcode == HMAN_OC)
-+            || (p_Manip->opcode == HMAN_OC_IPSEC_MANIP)
-+#if (DPAA_VERSION >= 11)
-+            || (p_Manip->opcode == HMAN_OC_CAPWAP_MANIP)
-+            || (p_Manip->opcode == HMAN_OC_CAPWAP_FRAGMENTATION)
-+            || (p_Manip->opcode == HMAN_OC_CAPWAP_REASSEMBLY)
-+#endif /* (DPAA_VERSION >= 11) */
-+            ) && (!FmPcdIsAdvancedOffloadSupported(p_FmPcd)))
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Advanced-offload must be enabled"));
-+        XX_Free(p_Manip);
-+        return NULL;
-+    }
-+    p_Manip->h_Spinlock = XX_InitSpinlock();
-+    if (!p_Manip->h_Spinlock)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("UNSUPPORTED HEADER MANIPULATION TYPE"));
-+        ReleaseManipHandler(p_Manip, p_FmPcd);
-+        XX_Free(p_Manip);
-+        return NULL;
-+    }INIT_LIST(&p_Manip->nodesLst);
-+
-+    switch (p_Manip->opcode)
-+    {
-+        case (HMAN_OC_IP_REASSEMBLY):
-+            /* IpReassembly */
-+            err = IpReassembly(&p_ManipParams->u.reassem, p_Manip);
-+            break;
-+        case (HMAN_OC_IP_FRAGMENTATION):
-+            /* IpFragmentation */
-+            err = IpFragmentation(&p_ManipParams->u.frag.u.ipFrag, p_Manip);
-+            if (err)
-+                break;
-+            err = IPManip(p_Manip);
-+            break;
-+        case (HMAN_OC_IPSEC_MANIP):
-+            err = IPSecManip(p_ManipParams, p_Manip);
-+            break;
-+#if (DPAA_VERSION >= 11)
-+        case (HMAN_OC_CAPWAP_REASSEMBLY):
-+            /* CapwapReassembly */
-+            err = CapwapReassembly(&p_ManipParams->u.reassem, p_Manip);
-+            break;
-+        case (HMAN_OC_CAPWAP_FRAGMENTATION):
-+            /* CapwapFragmentation */
-+            err = CapwapFragmentation(&p_ManipParams->u.frag.u.capwapFrag,
-+                                      p_Manip);
-+            break;
-+        case (HMAN_OC_CAPWAP_MANIP):
-+            err = CapwapManip(p_ManipParams, p_Manip);
-+            break;
-+#endif /* (DPAA_VERSION >= 11) */
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+            case (HMAN_OC_RMV_N_OR_INSRT_INT_FRM_HDR):
-+            /* HmanType1 */
-+            err = RmvHdrTillSpecLocNOrInsrtIntFrmHdr(&p_ManipParams->u.hdr.rmvParams, p_Manip);
-+            break;
-+            case (HMAN_OC_CAPWAP_FRAGMENTATION):
-+            err = CapwapFragmentation(&p_ManipParams->fragOrReasmParams.u.capwapFragParams,
-+                    p_Manip,
-+                    p_FmPcd,
-+                    p_ManipParams->fragOrReasmParams.sgBpid);
-+            if (err)
-+            {
-+                REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("UNSUPPORTED HEADER MANIPULATION TYPE"));
-+                ReleaseManipHandler(p_Manip, p_FmPcd);
-+                XX_Free(p_Manip);
-+                return NULL;
-+            }
-+            if (p_Manip->insrt)
-+            p_Manip->opcode = HMAN_OC_INSRT_HDR_BY_TEMPL_N_OR_FRAG_AFTER;
-+            case (HMAN_OC_INSRT_HDR_BY_TEMPL_N_OR_FRAG_AFTER):
-+            /* HmanType2 + if user asked only for fragmentation still need to allocate HmanType2 */
-+            err = InsrtHdrByTempl(&p_ManipParams->u.hdr.insrtParams, p_Manip, p_FmPcd);
-+            break;
-+            case (HMAN_OC_CAPWAP_REASSEMBLY):
-+            err = CapwapReassembly(&p_ManipParams->fragOrReasmParams.u.capwapReasmParams,
-+                    p_Manip,
-+                    p_FmPcd,
-+                    p_ManipParams->fragOrReasmParams.sgBpid);
-+            if (err)
-+            {
-+                REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("UNSUPPORTED HEADER MANIPULATION TYPE"));
-+                ReleaseManipHandler(p_Manip, p_FmPcd);
-+                XX_Free(p_Manip);
-+                return NULL;
-+            }
-+            if (p_Manip->rmv)
-+            p_Manip->opcode = HMAN_OC_CAPWAP_RMV_DTLS_IF_EXIST;
-+            case (HMAN_OC_CAPWAP_RMV_DTLS_IF_EXIST):
-+            /*CAPWAP decapsulation + if user asked only for reassembly still need to allocate CAPWAP decapsulation*/
-+            err = CapwapRmvDtlsHdr(p_FmPcd, p_Manip);
-+            break;
-+            case (HMAN_OC_MV_INT_FRAME_HDR_FROM_FRM_TO_BUFFER_PREFFIX):
-+            /*Application Specific type 1*/
-+            err = MvIntFrameHeaderFromFrameToBufferPrefix(p_Manip, TRUE);
-+            break;
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+        case (HMAN_OC):
-+            /* New Manip */
-+            err = CreateManipActionNew(p_Manip, p_ManipParams);
-+            break;
-+        default:
-+            REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("UNSUPPORTED HEADER MANIPULATION TYPE"));
-+            ReleaseManipHandler(p_Manip, p_FmPcd);
-+            XX_Free(p_Manip);
-+            return NULL;
-+    }
-+
-+    if (err)
-+    {
-+        REPORT_ERROR(MAJOR, err, NO_MSG);
-+        ReleaseManipHandler(p_Manip, p_FmPcd);
-+        XX_Free(p_Manip);
-+        return NULL;
-+    }
-+
-+    if (p_ManipParams->h_NextManip)
-+    {
-+        /* in the check routine we've verified that h_NextManip has no owners
-+         * and that only supported types are allowed. */
-+        p_Manip->h_NextManip = p_ManipParams->h_NextManip;
-+        /* save a "prev" pointer in h_NextManip */
-+        MANIP_SET_PREV(p_Manip->h_NextManip, p_Manip);
-+        FmPcdManipUpdateOwner(p_Manip->h_NextManip, TRUE);
-+    }
-+
-+    return p_Manip;
-+}
-+
-+t_Error FM_PCD_ManipNodeReplace(t_Handle h_Manip,
-+                                t_FmPcdManipParams *p_ManipParams)
-+{
-+    t_FmPcdManip *p_Manip = (t_FmPcdManip *)h_Manip, *p_FirstManip;
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)(p_Manip->h_FmPcd);
-+    t_Error err;
-+    uint8_t *p_WholeHmct = NULL, *p_ShadowHmct = NULL, *p_Hmtd = NULL;
-+    t_List lstOfNodeshichPointsOnCrntMdfManip, *p_Pos;
-+    t_CcNodeInformation *p_CcNodeInfo;
-+    SANITY_CHECK_RETURN_ERROR(h_Manip, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_ManipParams, E_INVALID_HANDLE);
-+
-+    INIT_LIST(&lstOfNodeshichPointsOnCrntMdfManip);
-+
-+    if ((p_ManipParams->type != e_FM_PCD_MANIP_HDR)
-+            || (p_Manip->type != e_FM_PCD_MANIP_HDR))
-+        RETURN_ERROR(
-+                MINOR,
-+                E_NOT_SUPPORTED,
-+                ("FM_PCD_ManipNodeReplace Functionality supported only for Header Manipulation."));
-+
-+    ASSERT_COND(p_Manip->opcode == HMAN_OC);
-+    ASSERT_COND(p_Manip->manipParams.h_NextManip == p_Manip->h_NextManip);
-+    memcpy((uint8_t*)&p_Manip->manipParams, p_ManipParams,
-+           sizeof(p_Manip->manipParams));
-+    p_Manip->manipParams.h_NextManip = p_Manip->h_NextManip;
-+
-+    /* The replacement of the HdrManip depends on the node type.*/
-+    /*
-+     * (1) If this is an independent node, all its owners should be updated.
-+     *
-+     * (2) If it is the head of a cascaded chain (it does not have a "prev" but
-+     * it has a "next" and it has a "cascaded" indication), the next
-+     * node remains unchanged, and the behavior is as in (1).
-+     *
-+     * (3) If it is not the head, but a part of a cascaded chain, in can be
-+     * also replaced as a regular node with just one owner.
-+     *
-+     * (4) If it is a part of a chain implemented as a unified table, the
-+     * whole table is replaced and the owners of the head node must be updated.
-+     *
-+     */
-+    /* lock shadow */
-+    if (!p_FmPcd->p_CcShadow)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("CC Shadow not allocated"));
-+
-+    if (!TRY_LOCK(p_FmPcd->h_ShadowSpinlock, &p_FmPcd->shadowLock))
-+        return ERROR_CODE(E_BUSY);
-+
-+    /* this routine creates a new manip action in the CC Shadow. */
-+    err = CreateManipActionShadow(p_Manip, p_ManipParams);
-+    if (err)
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+    /* If the owners list is empty (these are NOT the "owners" counter, but pointers from CC)
-+     * replace only HMTD and no lcok is required. Otherwise
-+     * lock the whole PCD
-+     * In case 4 MANIP_IS_UNIFIED_NON_FIRST(p_Manip) - Use the head node instead. */
-+    if (!FmPcdLockTryLockAll(p_FmPcd))
-+    {
-+        DBG(TRACE, ("FmPcdLockTryLockAll failed"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    p_ShadowHmct = (uint8_t*)PTR_MOVE(p_FmPcd->p_CcShadow, 16);
-+
-+    p_FirstManip = (t_FmPcdManip*)GetManipInfo(p_Manip,
-+                                               e_MANIP_HANDLER_TABLE_OWNER);
-+    ASSERT_COND(p_FirstManip);
-+
-+    if (!LIST_IsEmpty(&p_FirstManip->nodesLst))
-+        UpdateAdPtrOfNodesWhichPointsOnCrntMdfManip(
-+                p_FirstManip, &lstOfNodeshichPointsOnCrntMdfManip);
-+
-+    p_Hmtd = (uint8_t *)GetManipInfo(p_Manip, e_MANIP_HMTD);
-+    ASSERT_COND(p_Hmtd);
-+    BuildHmtd(p_FmPcd->p_CcShadow, (uint8_t *)p_Hmtd, p_ShadowHmct,
-+              ((t_FmPcd*)(p_Manip->h_FmPcd)));
-+
-+    LIST_FOR_EACH(p_Pos, &lstOfNodeshichPointsOnCrntMdfManip)
-+    {
-+        p_CcNodeInfo = CC_NODE_F_OBJECT(p_Pos);
-+        BuildHmtd(p_FmPcd->p_CcShadow, (uint8_t *)p_CcNodeInfo->h_CcNode,
-+                  p_ShadowHmct, ((t_FmPcd*)(p_Manip->h_FmPcd)));
-+    }
-+
-+    p_WholeHmct = (uint8_t *)GetManipInfo(p_Manip, e_MANIP_HMCT);
-+    ASSERT_COND(p_WholeHmct);
-+
-+    /* re-build the HMCT n the original location */
-+    err = CreateManipActionBackToOrig(p_Manip, p_ManipParams);
-+    if (err)
-+    {
-+        RELEASE_LOCK(p_FmPcd->shadowLock);
-+        RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+
-+    p_Hmtd = (uint8_t *)GetManipInfo(p_Manip, e_MANIP_HMTD);
-+    ASSERT_COND(p_Hmtd);
-+    BuildHmtd(p_FmPcd->p_CcShadow, (uint8_t *)p_Hmtd, p_WholeHmct,
-+              ((t_FmPcd*)p_Manip->h_FmPcd));
-+
-+    /* If LIST > 0, create a list of p_Ad's that point to the HMCT. Join also t_HMTD to this list.
-+     * For each p_Hmct (from list+fixed):
-+     * call Host Command to replace HMTD by a new one */LIST_FOR_EACH(p_Pos, &lstOfNodeshichPointsOnCrntMdfManip)
-+    {
-+        p_CcNodeInfo = CC_NODE_F_OBJECT(p_Pos);
-+        BuildHmtd(p_FmPcd->p_CcShadow, (uint8_t *)p_CcNodeInfo->h_CcNode,
-+                  p_WholeHmct, ((t_FmPcd*)(p_Manip->h_FmPcd)));
-+    }
-+
-+
-+    ReleaseLst(&lstOfNodeshichPointsOnCrntMdfManip);
-+
-+    FmPcdLockUnlockAll(p_FmPcd);
-+
-+    /* unlock shadow */
-+    RELEASE_LOCK(p_FmPcd->shadowLock);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_ManipNodeDelete(t_Handle h_ManipNode)
-+{
-+    t_FmPcdManip *p_Manip = (t_FmPcdManip *)h_ManipNode;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip, E_INVALID_HANDLE);
-+
-+    if (p_Manip->owner)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_STATE,
-+                ("This manipulation node not be removed because this node is occupied, first - unbind this node "));
-+
-+    if (p_Manip->h_NextManip)
-+    {
-+        MANIP_SET_PREV(p_Manip->h_NextManip, NULL);
-+        FmPcdManipUpdateOwner(p_Manip->h_NextManip, FALSE);
-+    }
-+
-+    if (p_Manip->p_Hmct
-+            && (MANIP_IS_UNIFIED_FIRST(p_Manip) || !MANIP_IS_UNIFIED(p_Manip)))
-+        FM_MURAM_FreeMem(((t_FmPcd *)p_Manip->h_FmPcd)->h_FmMuram,
-+                         p_Manip->p_Hmct);
-+
-+    if (p_Manip->h_Spinlock)
-+    {
-+        XX_FreeSpinlock(p_Manip->h_Spinlock);
-+        p_Manip->h_Spinlock = NULL;
-+    }
-+
-+    ReleaseManipHandler(p_Manip, p_Manip->h_FmPcd);
-+
-+    XX_Free(h_ManipNode);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_ManipGetStatistics(t_Handle h_ManipNode,
-+                                  t_FmPcdManipStats *p_FmPcdManipStats)
-+{
-+    t_FmPcdManip *p_Manip = (t_FmPcdManip *)h_ManipNode;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Manip, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcdManipStats, E_NULL_POINTER);
-+
-+    switch (p_Manip->opcode)
-+    {
-+        case (HMAN_OC_IP_REASSEMBLY):
-+            return IpReassemblyStats(p_Manip,
-+                                     &p_FmPcdManipStats->u.reassem.u.ipReassem);
-+        case (HMAN_OC_IP_FRAGMENTATION):
-+            return IpFragmentationStats(p_Manip,
-+                                        &p_FmPcdManipStats->u.frag.u.ipFrag);
-+#if (DPAA_VERSION >= 11)
-+        case (HMAN_OC_CAPWAP_REASSEMBLY):
-+            return CapwapReassemblyStats(
-+                    p_Manip, &p_FmPcdManipStats->u.reassem.u.capwapReassem);
-+	case (HMAN_OC_CAPWAP_FRAGMENTATION):
-+		return CapwapFragmentationStats(
-+			p_Manip, &p_FmPcdManipStats->u.frag.u.capwapFrag);
-+#endif /* (DPAA_VERSION >= 11) */
-+        default:
-+            RETURN_ERROR(MAJOR, E_NOT_SUPPORTED,
-+                         ("no statistics to this type of manip"));
-+    }
-+
-+    return E_OK;
-+}
-+
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+t_Handle FM_PCD_StatisticsSetNode(t_Handle h_FmPcd, t_FmPcdStatsParams *p_StatsParams)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    t_FmPcdManip *p_Manip;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmPcd,E_INVALID_HANDLE,NULL);
-+    SANITY_CHECK_RETURN_VALUE(p_StatsParams,E_INVALID_HANDLE,NULL);
-+
-+    p_Manip = ManipOrStatsSetNode(h_FmPcd, (t_Handle)p_StatsParams, TRUE);
-+    if (!p_Manip)
-+    return NULL;
-+
-+    switch (p_Manip->opcode)
-+    {
-+        case (HMAN_OC_CAPWAP_INDEXED_STATS):
-+        /* Indexed statistics */
-+        err = IndxStats(p_StatsParams, p_Manip, p_FmPcd);
-+        break;
-+        default:
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("UNSUPPORTED Statistics type"));
-+        ReleaseManipHandler(p_Manip, p_FmPcd);
-+        XX_Free(p_Manip);
-+        return NULL;
-+    }
-+
-+    if (err)
-+    {
-+        REPORT_ERROR(MAJOR, err, NO_MSG);
-+        ReleaseManipHandler(p_Manip, p_FmPcd);
-+        XX_Free(p_Manip);
-+        return NULL;
-+    }
-+
-+    return p_Manip;
-+}
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_manip.h
-@@ -0,0 +1,555 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_manip.h
-+
-+ @Description   FM PCD manip...
-+*//***************************************************************************/
-+#ifndef __FM_MANIP_H
-+#define __FM_MANIP_H
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "list_ext.h"
-+
-+#include "fm_cc.h"
-+
-+
-+/***********************************************************************/
-+/*          Header manipulations defines                              */
-+/***********************************************************************/
-+
-+#define NUM_OF_SCRATCH_POOL_BUFFERS             1000 /*TODO - Change it!!*/
-+
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+#define HMAN_OC_RMV_N_OR_INSRT_INT_FRM_HDR                      0x2e
-+#define HMAN_OC_INSRT_HDR_BY_TEMPL_N_OR_FRAG_AFTER              0x31
-+#define HMAN_OC_MV_INT_FRAME_HDR_FROM_FRM_TO_BUFFER_PREFFIX     0x2f
-+#define HMAN_OC_CAPWAP_RMV_DTLS_IF_EXIST                        0x30
-+#define HMAN_OC_CAPWAP_REASSEMBLY                               0x11 /* dummy */
-+#define HMAN_OC_CAPWAP_INDEXED_STATS                            0x32 /* dummy */
-+#define HMAN_OC_CAPWAP_FRAGMENTATION                            0x33
-+#else
-+#define HMAN_OC_CAPWAP_MANIP                                    0x2F
-+#define HMAN_OC_CAPWAP_FRAG_CHECK                               0x2E
-+#define HMAN_OC_CAPWAP_FRAGMENTATION                            0x33
-+#define HMAN_OC_CAPWAP_REASSEMBLY                               0x30
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+#define HMAN_OC_IP_MANIP                                        0x34
-+#define HMAN_OC_IP_FRAGMENTATION                                0x74
-+#define HMAN_OC_IP_REASSEMBLY                                   0xB4
-+#define HMAN_OC_IPSEC_MANIP                                     0xF4
-+#define HMAN_OC                                                 0x35
-+
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+#define HMAN_RMV_HDR                               0x80000000
-+#define HMAN_INSRT_INT_FRM_HDR                     0x40000000
-+
-+#define UDP_CHECKSUM_FIELD_OFFSET_FROM_UDP          6
-+#define UDP_CHECKSUM_FIELD_SIZE                     2
-+#define UDP_LENGTH_FIELD_OFFSET_FROM_UDP            4
-+
-+#define IPv4_DSCECN_FIELD_OFFSET_FROM_IP            1
-+#define IPv4_TOTALLENGTH_FIELD_OFFSET_FROM_IP       2
-+#define IPv4_HDRCHECKSUM_FIELD_OFFSET_FROM_IP       10
-+#define VLAN_TAG_FIELD_OFFSET_FROM_ETH              12
-+#define IPv4_ID_FIELD_OFFSET_FROM_IP                4
-+
-+#define IPv6_PAYLOAD_LENGTH_OFFSET_FROM_IP          4
-+#define IPv6_NEXT_HEADER_OFFSET_FROM_IP             6
-+
-+#define FM_PCD_MANIP_CAPWAP_REASM_TABLE_SIZE               0x80
-+#define FM_PCD_MANIP_CAPWAP_REASM_TABLE_ALIGN              8
-+#define FM_PCD_MANIP_CAPWAP_REASM_RFD_SIZE                 32
-+#define FM_PCD_MANIP_CAPWAP_REASM_AUTO_LEARNING_HASH_ENTRY_SIZE 4
-+#define FM_PCD_MANIP_CAPWAP_REASM_TIME_OUT_ENTRY_SIZE      8
-+
-+
-+#define FM_PCD_MANIP_CAPWAP_REASM_TIME_OUT_BETWEEN_FRAMES          0x40000000
-+#define FM_PCD_MANIP_CAPWAP_REASM_HALT_ON_DUPLICATE_FRAG           0x10000000
-+#define FM_PCD_MANIP_CAPWAP_REASM_AUTOMATIC_LEARNIN_HASH_8_WAYS    0x08000000
-+#define FM_PCD_MANIP_CAPWAP_REASM_PR_COPY                          0x00800000
-+
-+#define FM_PCD_MANIP_CAPWAP_FRAG_COMPR_OPTION_FIELD_EN             0x80000000
-+
-+#define FM_PCD_MANIP_INDEXED_STATS_ENTRY_SIZE               4
-+#define FM_PCD_MANIP_INDEXED_STATS_CNIA                     0x20000000
-+#define FM_PCD_MANIP_INDEXED_STATS_DPD                      0x10000000
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+
-+#if (DPAA_VERSION >= 11)
-+#define FM_PCD_MANIP_CAPWAP_DTLS                            0x00040000
-+#define FM_PCD_MANIP_CAPWAP_NADEN                           0x20000000
-+
-+#define FM_PCD_MANIP_CAPWAP_FRAG_CHECK_MTU_SHIFT            16
-+#define FM_PCD_MANIP_CAPWAP_FRAG_CHECK_NO_FRAGMENTATION     0xFFFF0000
-+#define FM_PCD_MANIP_CAPWAP_FRAG_CHECK_CNIA                 0x20000000
-+
-+#define FM_PCD_MANIP_CAPWAP_FRAG_COMPRESS_EN                0x04000000
-+#define FM_PCD_MANIP_CAPWAP_FRAG_SCRATCH_BPID               24
-+#define FM_PCD_MANIP_CAPWAP_FRAG_SG_BDID_EN                 0x08000000
-+#define FM_PCD_MANIP_CAPWAP_FRAG_SG_BDID_MASK               0xFF000000
-+#define FM_PCD_MANIP_CAPWAP_FRAG_SG_BDID_SHIFT              24
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+#define FM_PCD_MANIP_REASM_TABLE_SIZE                    0x40
-+#define FM_PCD_MANIP_REASM_TABLE_ALIGN                   8
-+
-+#define FM_PCD_MANIP_REASM_COMMON_PARAM_TABLE_SIZE       64
-+#define FM_PCD_MANIP_REASM_COMMON_PARAM_TABLE_ALIGN      8
-+#define FM_PCD_MANIP_REASM_TIME_OUT_BETWEEN_FRAMES       0x80000000
-+#define FM_PCD_MANIP_REASM_COUPLING_ENABLE               0x40000000
-+#define FM_PCD_MANIP_REASM_COUPLING_MASK                 0xFF000000
-+#define FM_PCD_MANIP_REASM_COUPLING_SHIFT                24
-+#define FM_PCD_MANIP_REASM_LIODN_MASK                    0x0000003F
-+#define FM_PCD_MANIP_REASM_LIODN_SHIFT                   56
-+#define FM_PCD_MANIP_REASM_ELIODN_MASK                   0x000003c0
-+#define FM_PCD_MANIP_REASM_ELIODN_SHIFT                  38
-+#define FM_PCD_MANIP_REASM_COMMON_INT_BUFFER_IDX_MASK    0x000000FF
-+#define FM_PCD_MANIP_REASM_COMMON_INT_BUFFER_IDX_SHIFT   24
-+#define FM_PCD_MANIP_REASM_TIMEOUT_THREAD_THRESH        1024
-+
-+#define FM_PCD_MANIP_IP_MTU_SHIFT                           16
-+#define FM_PCD_MANIP_IP_NO_FRAGMENTATION                    0xFFFF0000
-+#define FM_PCD_MANIP_IP_CNIA                                0x20000000
-+
-+#define FM_PCD_MANIP_IP_FRAG_DF_SHIFT                       28
-+#define FM_PCD_MANIP_IP_FRAG_SCRATCH_BPID                   24
-+#define FM_PCD_MANIP_IP_FRAG_SG_BDID_EN                     0x08000000
-+#define FM_PCD_MANIP_IP_FRAG_SG_BDID_MASK                   0xFF000000
-+#define FM_PCD_MANIP_IP_FRAG_SG_BDID_SHIFT                  24
-+
-+#define FM_PCD_MANIP_IPSEC_DEC                              0x10000000
-+#define FM_PCD_MANIP_IPSEC_VIPV_EN                          0x08000000
-+#define FM_PCD_MANIP_IPSEC_ECN_EN                           0x04000000
-+#define FM_PCD_MANIP_IPSEC_DSCP_EN                          0x02000000
-+#define FM_PCD_MANIP_IPSEC_VIPL_EN                          0x01000000
-+#define FM_PCD_MANIP_IPSEC_NADEN                            0x20000000
-+
-+#define FM_PCD_MANIP_IPSEC_IP_HDR_LEN_MASK                  0x00FF0000
-+#define FM_PCD_MANIP_IPSEC_IP_HDR_LEN_SHIFT                 16
-+
-+#define FM_PCD_MANIP_IPSEC_ARW_SIZE_MASK                    0xFFFF0000
-+#define FM_PCD_MANIP_IPSEC_ARW_SIZE_SHIFT                   16
-+
-+#define e_FM_MANIP_IP_INDX                                  1
-+
-+#define HMCD_OPCODE_GENERIC_RMV                 0x01
-+#define HMCD_OPCODE_GENERIC_INSRT               0x02
-+#define HMCD_OPCODE_GENERIC_REPLACE             0x05
-+#define HMCD_OPCODE_L2_RMV                      0x08
-+#define HMCD_OPCODE_L2_INSRT                    0x09
-+#define HMCD_OPCODE_VLAN_PRI_UPDATE             0x0B
-+#define HMCD_OPCODE_IPV4_UPDATE                 0x0C
-+#define HMCD_OPCODE_IPV6_UPDATE                 0x10
-+#define HMCD_OPCODE_TCP_UDP_UPDATE              0x0E
-+#define HMCD_OPCODE_TCP_UDP_CHECKSUM            0x14
-+#define HMCD_OPCODE_REPLACE_IP                  0x12
-+#define HMCD_OPCODE_RMV_TILL                    0x15
-+#define HMCD_OPCODE_UDP_INSRT                   0x16
-+#define HMCD_OPCODE_IP_INSRT                    0x17
-+#define HMCD_OPCODE_CAPWAP_RMV                  0x18
-+#define HMCD_OPCODE_CAPWAP_INSRT                0x18
-+#define HMCD_OPCODE_GEN_FIELD_REPLACE           0x19
-+
-+#define HMCD_LAST                               0x00800000
-+
-+#define HMCD_DSCP_VALUES                        64
-+
-+#define HMCD_BASIC_SIZE                         4
-+#define HMCD_PTR_SIZE                           4
-+#define HMCD_PARAM_SIZE                         4
-+#define HMCD_IPV4_ADDR_SIZE                     4
-+#define HMCD_IPV6_ADDR_SIZE                     0x10
-+#define HMCD_L4_HDR_SIZE                        8
-+
-+#define HMCD_CAPWAP_INSRT                       0x00010000
-+#define HMCD_INSRT_UDP_LITE                     0x00010000
-+#define HMCD_IP_ID_MASK                         0x0000FFFF
-+#define HMCD_IP_SIZE_MASK                       0x0000FF00
-+#define HMCD_IP_SIZE_SHIFT                      8
-+#define HMCD_IP_LAST_PID_MASK                   0x000000FF
-+#define HMCD_IP_OR_QOS                          0x00010000
-+#define HMCD_IP_L4_CS_CALC                      0x00040000
-+#define HMCD_IP_DF_MODE                         0x00400000
-+
-+
-+#define HMCD_OC_SHIFT                           24
-+
-+#define HMCD_RMV_OFFSET_SHIFT                   0
-+#define HMCD_RMV_SIZE_SHIFT                     8
-+
-+#define HMCD_INSRT_OFFSET_SHIFT                 0
-+#define HMCD_INSRT_SIZE_SHIFT                   8
-+
-+#define HMTD_CFG_TYPE                           0x4000
-+#define HMTD_CFG_EXT_HMCT                       0x0080
-+#define HMTD_CFG_PRS_AFTER_HM                   0x0040
-+#define HMTD_CFG_NEXT_AD_EN                     0x0020
-+
-+#define HMCD_RMV_L2_ETHERNET                    0
-+#define HMCD_RMV_L2_STACKED_QTAGS               1
-+#define HMCD_RMV_L2_ETHERNET_AND_MPLS           2
-+#define HMCD_RMV_L2_MPLS                        3
-+#define HMCD_RMV_L2_PPPOE                        4
-+
-+#define HMCD_INSRT_L2_MPLS                      0
-+#define HMCD_INSRT_N_UPDATE_L2_MPLS             1
-+#define HMCD_INSRT_L2_PPPOE                     2
-+#define HMCD_INSRT_L2_SIZE_SHIFT                24
-+
-+#define HMCD_L2_MODE_SHIFT                      16
-+
-+#define HMCD_VLAN_PRI_REP_MODE_SHIFT            16
-+#define HMCD_VLAN_PRI_UPDATE                    0
-+#define HMCD_VLAN_PRI_UPDATE_DSCP_TO_VPRI       1
-+
-+#define HMCD_IPV4_UPDATE_TTL                    0x00000001
-+#define HMCD_IPV4_UPDATE_TOS                    0x00000002
-+#define HMCD_IPV4_UPDATE_DST                    0x00000020
-+#define HMCD_IPV4_UPDATE_SRC                    0x00000040
-+#define HMCD_IPV4_UPDATE_ID                     0x00000080
-+#define HMCD_IPV4_UPDATE_TOS_SHIFT              8
-+
-+#define HMCD_IPV6_UPDATE_HL                     0x00000001
-+#define HMCD_IPV6_UPDATE_TC                     0x00000002
-+#define HMCD_IPV6_UPDATE_DST                    0x00000040
-+#define HMCD_IPV6_UPDATE_SRC                    0x00000080
-+#define HMCD_IPV6_UPDATE_TC_SHIFT               8
-+
-+#define HMCD_TCP_UDP_UPDATE_DST                 0x00004000
-+#define HMCD_TCP_UDP_UPDATE_SRC                 0x00008000
-+#define HMCD_TCP_UDP_UPDATE_SRC_SHIFT           16
-+
-+#define HMCD_IP_REPLACE_REPLACE_IPV4            0x00000000
-+#define HMCD_IP_REPLACE_REPLACE_IPV6            0x00010000
-+#define HMCD_IP_REPLACE_TTL_HL                  0x00200000
-+#define HMCD_IP_REPLACE_ID                      0x00400000
-+
-+#define HMCD_IP_REPLACE_L3HDRSIZE_SHIFT         24
-+
-+#define HMCD_GEN_FIELD_SIZE_SHIFT               16
-+#define HMCD_GEN_FIELD_SRC_OFF_SHIFT            8
-+#define HMCD_GEN_FIELD_DST_OFF_SHIFT            0
-+#define HMCD_GEN_FIELD_MASK_EN                  0x00400000
-+
-+#define HMCD_GEN_FIELD_MASK_OFF_SHIFT           16
-+#define HMCD_GEN_FIELD_MASK_SHIFT               24
-+
-+#define DSCP_TO_VLAN_TABLE_SIZE                    32
-+
-+#define MANIP_GET_HMCT_SIZE(h_Manip)                    (((t_FmPcdManip *)h_Manip)->tableSize)
-+#define MANIP_GET_DATA_SIZE(h_Manip)                    (((t_FmPcdManip *)h_Manip)->dataSize)
-+
-+#define MANIP_GET_HMCT_PTR(h_Manip)                     (((t_FmPcdManip *)h_Manip)->p_Hmct)
-+#define MANIP_GET_DATA_PTR(h_Manip)                     (((t_FmPcdManip *)h_Manip)->p_Data)
-+
-+#define MANIP_SET_HMCT_PTR(h_Manip, h_NewPtr)           (((t_FmPcdManip *)h_Manip)->p_Hmct = h_NewPtr)
-+#define MANIP_SET_DATA_PTR(h_Manip, h_NewPtr)           (((t_FmPcdManip *)h_Manip)->p_Data = h_NewPtr)
-+
-+#define MANIP_GET_HMTD_PTR(h_Manip)                     (((t_FmPcdManip *)h_Manip)->h_Ad)
-+#define MANIP_DONT_REPARSE(h_Manip)                     (((t_FmPcdManip *)h_Manip)->dontParseAfterManip)
-+#define MANIP_SET_PREV(h_Manip, h_Prev)                 (((t_FmPcdManip *)h_Manip)->h_PrevManip = h_Prev)
-+#define MANIP_GET_OWNERS(h_Manip)                       (((t_FmPcdManip *)h_Manip)->owner)
-+#define MANIP_GET_TYPE(h_Manip)                         (((t_FmPcdManip *)h_Manip)->type)
-+#define MANIP_SET_UNIFIED_TBL_PTR_INDICATION(h_Manip)   (((t_FmPcdManip *)h_Manip)->unifiedTablePtr = TRUE)
-+#define MANIP_GET_MURAM(h_Manip)                        (((t_FmPcd *)((t_FmPcdManip *)h_Manip)->h_FmPcd)->h_FmMuram)
-+#define MANIP_FREE_HMTD(h_Manip)                        \
-+        {if (((t_FmPcdManip *)h_Manip)->muramAllocate)    \
-+            FM_MURAM_FreeMem(((t_FmPcd *)((t_FmPcdManip *)h_Manip)->h_FmPcd)->h_FmMuram, ((t_FmPcdManip *)h_Manip)->h_Ad);\
-+        else                                            \
-+            XX_Free(((t_FmPcdManip *)h_Manip)->h_Ad);    \
-+        ((t_FmPcdManip *)h_Manip)->h_Ad = NULL;            \
-+        }
-+/* position regarding Manip SW structure */
-+#define MANIP_IS_FIRST(h_Manip)                         (!(((t_FmPcdManip *)h_Manip)->h_PrevManip))
-+#define MANIP_IS_CASCADED(h_Manip)                       (((t_FmPcdManip *)h_Manip)->cascaded)
-+#define MANIP_IS_UNIFIED(h_Manip)                       (!(((t_FmPcdManip *)h_Manip)->unifiedPosition == e_MANIP_UNIFIED_NONE))
-+#define MANIP_IS_UNIFIED_NON_FIRST(h_Manip)             ((((t_FmPcdManip *)h_Manip)->unifiedPosition == e_MANIP_UNIFIED_MID) || \
-+                                                         (((t_FmPcdManip *)h_Manip)->unifiedPosition == e_MANIP_UNIFIED_LAST))
-+#define MANIP_IS_UNIFIED_NON_LAST(h_Manip)              ((((t_FmPcdManip *)h_Manip)->unifiedPosition == e_MANIP_UNIFIED_FIRST) ||\
-+                                                         (((t_FmPcdManip *)h_Manip)->unifiedPosition == e_MANIP_UNIFIED_MID))
-+#define MANIP_IS_UNIFIED_FIRST(h_Manip)                    (((t_FmPcdManip *)h_Manip)->unifiedPosition == e_MANIP_UNIFIED_FIRST)
-+#define MANIP_IS_UNIFIED_LAST(h_Manip)                   (((t_FmPcdManip *)h_Manip)->unifiedPosition == e_MANIP_UNIFIED_LAST)
-+
-+#define MANIP_UPDATE_UNIFIED_POSITION(h_Manip)          (((t_FmPcdManip *)h_Manip)->unifiedPosition = \
-+                                                         (((t_FmPcdManip *)h_Manip)->unifiedPosition == e_MANIP_UNIFIED_NONE)? \
-+                                                            e_MANIP_UNIFIED_LAST : e_MANIP_UNIFIED_MID)
-+
-+typedef enum e_ManipUnifiedPosition {
-+    e_MANIP_UNIFIED_NONE = 0,
-+    e_MANIP_UNIFIED_FIRST,
-+    e_MANIP_UNIFIED_MID,
-+    e_MANIP_UNIFIED_LAST
-+} e_ManipUnifiedPosition;
-+
-+typedef enum e_ManipInfo {
-+    e_MANIP_HMTD,
-+    e_MANIP_HMCT,
-+    e_MANIP_HANDLER_TABLE_OWNER
-+}e_ManipInfo;
-+/***********************************************************************/
-+/*          Memory map                                                 */
-+/***********************************************************************/
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(push,1)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+typedef struct t_CapwapReasmPram {
-+    volatile uint32_t mode;
-+    volatile uint32_t autoLearnHashTblPtr;
-+    volatile uint32_t intStatsTblPtr;
-+    volatile uint32_t reasmFrmDescPoolTblPtr;
-+    volatile uint32_t reasmFrmDescIndexPoolTblPtr;
-+    volatile uint32_t timeOutTblPtr;
-+    volatile uint32_t bufferPoolIdAndRisc1SetIndexes;
-+    volatile uint32_t risc23SetIndexes;
-+    volatile uint32_t risc4SetIndexesAndExtendedStatsTblPtr;
-+    volatile uint32_t extendedStatsTblPtr;
-+    volatile uint32_t expirationDelay;
-+    volatile uint32_t totalProcessedFragCounter;
-+    volatile uint32_t totalUnsuccessfulReasmFramesCounter;
-+    volatile uint32_t totalDuplicatedFragCounter;
-+    volatile uint32_t totalMalformdFragCounter;
-+    volatile uint32_t totalTimeOutCounter;
-+    volatile uint32_t totalSetBusyCounter;
-+    volatile uint32_t totalRfdPoolBusyCounter;
-+    volatile uint32_t totalDiscardedFragsCounter;
-+    volatile uint32_t totalMoreThan16FramesCounter;
-+    volatile uint32_t internalBufferBusy;
-+    volatile uint32_t externalBufferBusy;
-+    volatile uint32_t reserved1[4];
-+} t_CapwapReasmPram;
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+
-+typedef _Packed struct t_ReassTbl {
-+    volatile uint16_t waysNumAndSetSize;
-+    volatile uint16_t autoLearnHashKeyMask;
-+    volatile uint32_t reassCommonPrmTblPtr;
-+    volatile uint32_t liodnAlAndAutoLearnHashTblPtrHi;
-+    volatile uint32_t autoLearnHashTblPtrLow;
-+    volatile uint32_t liodnSlAndAutoLearnSetLockTblPtrHi;
-+    volatile uint32_t autoLearnSetLockTblPtrLow;
-+    volatile uint16_t minFragSize; /* Not relevant for CAPWAP*/
-+    volatile uint16_t maxReassemblySize; /* Only relevant for CAPWAP*/
-+    volatile uint32_t totalSuccessfullyReasmFramesCounter;
-+    volatile uint32_t totalValidFragmentCounter;
-+    volatile uint32_t totalProcessedFragCounter;
-+    volatile uint32_t totalMalformdFragCounter;
-+    volatile uint32_t totalSetBusyCounter;
-+    volatile uint32_t totalDiscardedFragsCounter;
-+    volatile uint32_t totalMoreThan16FramesCounter;
-+    volatile uint32_t reserved2[2];
-+} _PackedType t_ReassTbl;
-+
-+typedef struct t_ReassCommonTbl {
-+    volatile uint32_t timeoutModeAndFqid;
-+    volatile uint32_t reassFrmDescIndexPoolTblPtr;
-+    volatile uint32_t liodnAndReassFrmDescPoolPtrHi;
-+    volatile uint32_t reassFrmDescPoolPtrLow;
-+    volatile uint32_t timeOutTblPtr;
-+    volatile uint32_t expirationDelay;
-+    volatile uint32_t internalBufferManagement;
-+    volatile uint32_t reserved2;
-+    volatile uint32_t totalTimeOutCounter;
-+    volatile uint32_t totalRfdPoolBusyCounter;
-+    volatile uint32_t totalInternalBufferBusy;
-+    volatile uint32_t totalExternalBufferBusy;
-+    volatile uint32_t totalSgFragmentCounter;
-+    volatile uint32_t totalDmaSemaphoreDepletionCounter;
-+    volatile uint32_t totalNCSPCounter;
-+    volatile uint32_t discardMask;
-+} t_ReassCommonTbl;
-+
-+typedef _Packed struct t_Hmtd {
-+    volatile uint16_t   cfg;
-+    volatile uint8_t    eliodnOffset;
-+    volatile uint8_t    extHmcdBasePtrHi;
-+    volatile uint32_t   hmcdBasePtr;
-+    volatile uint16_t   nextAdIdx;
-+    volatile uint8_t    res1;
-+    volatile uint8_t    opCode;
-+    volatile uint32_t   res2;
-+} _PackedType t_Hmtd;
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+
-+/***********************************************************************/
-+/*  Driver's internal structures                                       */
-+/***********************************************************************/
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+typedef struct
-+{
-+    t_Handle p_AutoLearnHashTbl;
-+    t_Handle p_ReassmFrmDescrPoolTbl;
-+    t_Handle p_ReassmFrmDescrIndxPoolTbl;
-+    t_Handle p_TimeOutTbl;
-+    uint16_t maxNumFramesInProcess;
-+    uint8_t  numOfTasks;
-+    //uint8_t  poolId;
-+    uint8_t  prOffset;
-+    uint16_t dataOffset;
-+    uint8_t  sgBpid;
-+    uint8_t  hwPortId;
-+    uint32_t fqidForTimeOutFrames;
-+    uint32_t timeoutRoutineRequestTime;
-+    uint32_t bitFor1Micro;
-+} t_CapwapFragParams;
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+
-+typedef struct
-+{
-+    t_AdOfTypeContLookup    *p_Frag;
-+#if (DPAA_VERSION == 10)
-+    uint8_t                 scratchBpid;
-+#endif /* (DPAA_VERSION == 10) */
-+} t_FragParams;
-+
-+typedef struct t_ReassmParams
-+{
-+    e_NetHeaderType                 hdr; /* Header selection */
-+    t_ReassCommonTbl              	*p_ReassCommonTbl;
-+    uintptr_t                       reassFrmDescrIndxPoolTblAddr;
-+    uintptr_t                       reassFrmDescrPoolTblAddr;
-+    uintptr_t                       timeOutTblAddr;
-+    uintptr_t                       internalBufferPoolManagementIndexAddr;
-+    uintptr_t                       internalBufferPoolAddr;
-+    uint32_t                        maxNumFramesInProcess;
-+    uint8_t                         sgBpid;
-+    uint8_t                         dataMemId;
-+    uint16_t                        dataLiodnOffset;
-+    uint32_t                        fqidForTimeOutFrames;
-+    e_FmPcdManipReassemTimeOutMode  timeOutMode;
-+    uint32_t                        timeoutThresholdForReassmProcess;
-+    union {
-+	struct {
-+		t_Handle                h_Ipv4Ad;
-+	    t_Handle                h_Ipv6Ad;
-+	    bool                    ipv6Assigned;
-+	    t_ReassTbl				*p_Ipv4ReassTbl;
-+	    t_ReassTbl              *p_Ipv6ReassTbl;
-+	    uintptr_t               ipv4AutoLearnHashTblAddr;
-+	    uintptr_t               ipv6AutoLearnHashTblAddr;
-+	    uintptr_t               ipv4AutoLearnSetLockTblAddr;
-+	    uintptr_t               ipv6AutoLearnSetLockTblAddr;
-+	    uint16_t                        minFragSize[2];
-+	    e_FmPcdManipReassemWaysNumber   numOfFramesPerHashEntry[2];
-+	    uint8_t                         relativeSchemeId[2];
-+	    t_Handle                        h_Ipv4Scheme;
-+	    t_Handle                        h_Ipv6Scheme;
-+	    uint32_t                        nonConsistentSpFqid;
-+	} ip;
-+	struct {
-+		t_Handle                h_Ad;
-+	    t_ReassTbl				*p_ReassTbl;
-+	    uintptr_t               autoLearnHashTblAddr;
-+	    uintptr_t               autoLearnSetLockTblAddr;
-+	    uint16_t                maxRessembledsSize;
-+	    e_FmPcdManipReassemWaysNumber   numOfFramesPerHashEntry;
-+	    uint8_t                 relativeSchemeId;
-+	    t_Handle                h_Scheme;
-+	} capwap;
-+    };
-+} t_ReassmParams;
-+
-+typedef struct{
-+    e_FmPcdManipType        type;
-+    t_FmPcdManipParams      manipParams;
-+    bool                    muramAllocate;
-+    t_Handle                h_Ad;
-+    uint32_t                opcode;
-+    bool                    rmv;
-+    bool                    insrt;
-+    t_Handle                h_NextManip;
-+    t_Handle                h_PrevManip;
-+    e_FmPcdManipType        nextManipType;
-+    /* HdrManip parameters*/
-+    uint8_t                 *p_Hmct;
-+    uint8_t                 *p_Data;
-+    bool                    dontParseAfterManip;
-+    bool                    fieldUpdate;
-+    bool                    custom;
-+    uint16_t                tableSize;
-+    uint8_t                 dataSize;
-+    bool                    cascaded;
-+    e_ManipUnifiedPosition  unifiedPosition;
-+    /* end HdrManip */
-+    uint8_t                 *p_Template;
-+    uint16_t                owner;
-+    uint32_t                updateParams;
-+    uint32_t                shadowUpdateParams;
-+    bool                    frag;
-+    bool                    reassm;
-+    uint16_t                sizeForFragmentation;
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+    t_Handle                h_Frag;
-+    t_CapwapFragParams      capwapFragParams;
-+#endif /* (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10)) */
-+    union {
-+        t_ReassmParams    	reassmParams;
-+        t_FragParams      	fragParams;
-+    };
-+    uint8_t                 icOffset;
-+    uint16_t                ownerTmp;
-+    bool                    cnia;
-+    t_Handle                p_StatsTbl;
-+    t_Handle                h_FmPcd;
-+    t_List                  nodesLst;
-+    t_Handle                h_Spinlock;
-+} t_FmPcdManip;
-+
-+typedef struct t_FmPcdCcSavedManipParams
-+{
-+    union
-+    {
-+        struct
-+        {
-+            uint16_t    dataOffset;
-+            //uint8_t     poolId;
-+        }capwapParams;
-+        struct
-+        {
-+            uint16_t    dataOffset;
-+            uint8_t     poolId;
-+        }ipParams;
-+    };
-+
-+} t_FmPcdCcSavedManipParams;
-+
-+
-+#endif /* __FM_MANIP_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_pcd.c
-@@ -0,0 +1,2095 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_pcd.c
-+
-+ @Description   FM PCD ...
-+*//***************************************************************************/
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "string_ext.h"
-+#include "xx_ext.h"
-+#include "sprint_ext.h"
-+#include "debug_ext.h"
-+#include "net_ext.h"
-+#include "fm_ext.h"
-+#include "fm_pcd_ext.h"
-+
-+#include "fm_common.h"
-+#include "fm_pcd.h"
-+#include "fm_pcd_ipc.h"
-+#include "fm_hc.h"
-+#include "fm_muram_ext.h"
-+
-+
-+/****************************************/
-+/*       static functions               */
-+/****************************************/
-+
-+static t_Error CheckFmPcdParameters(t_FmPcd *p_FmPcd)
-+{
-+    if (!p_FmPcd->h_Fm)
-+         RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("h_Fm has to be initialized"));
-+
-+    if (p_FmPcd->guestId == NCSW_MASTER_ID)
-+    {
-+        if (p_FmPcd->p_FmPcdKg && !p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Something WRONG"));
-+
-+        if (p_FmPcd->p_FmPcdPlcr && !p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Something WRONG"));
-+
-+        if (!p_FmPcd->f_Exception)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("f_FmPcdExceptions has to be initialized"));
-+
-+        if ((!p_FmPcd->f_FmPcdIndexedException) && (p_FmPcd->p_FmPcdPlcr || p_FmPcd->p_FmPcdKg))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("f_FmPcdIndexedException has to be initialized"));
-+
-+        if (p_FmPcd->p_FmPcdDriverParam->prsMaxParseCycleLimit > PRS_MAX_CYCLE_LIMIT)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("prsMaxParseCycleLimit has to be less than 8191"));
-+    }
-+
-+    return E_OK;
-+}
-+
-+static volatile bool blockingFlag = FALSE;
-+static void IpcMsgCompletionCB(t_Handle   h_FmPcd,
-+                               uint8_t    *p_Msg,
-+                               uint8_t    *p_Reply,
-+                               uint32_t   replyLength,
-+                               t_Error    status)
-+{
-+    UNUSED(h_FmPcd);UNUSED(p_Msg);UNUSED(p_Reply);UNUSED(replyLength);UNUSED(status);
-+    blockingFlag = FALSE;
-+}
-+
-+static t_Error IpcMsgHandlerCB(t_Handle  h_FmPcd,
-+                               uint8_t   *p_Msg,
-+                               uint32_t  msgLength,
-+                               uint8_t   *p_Reply,
-+                               uint32_t  *p_ReplyLength)
-+{
-+    t_FmPcd             *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    t_Error             err = E_OK;
-+    t_FmPcdIpcMsg       *p_IpcMsg   = (t_FmPcdIpcMsg*)p_Msg;
-+    t_FmPcdIpcReply     *p_IpcReply = (t_FmPcdIpcReply*)p_Reply;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((msgLength >= sizeof(uint32_t)), E_INVALID_VALUE);
-+
-+#ifdef DISABLE_SANITY_CHECKS
-+    UNUSED(msgLength);
-+#endif /* DISABLE_SANITY_CHECKS */
-+
-+    ASSERT_COND(p_Msg);
-+
-+    memset(p_IpcReply, 0, (sizeof(uint8_t) * FM_PCD_MAX_REPLY_SIZE));
-+    *p_ReplyLength = 0;
-+
-+    switch (p_IpcMsg->msgId)
-+    {
-+        case (FM_PCD_MASTER_IS_ALIVE):
-+            *(uint8_t*)(p_IpcReply->replyBody) = 1;
-+            p_IpcReply->error = E_OK;
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(uint8_t);
-+            break;
-+        case (FM_PCD_MASTER_IS_ENABLED):
-+            /* count partitions registrations */
-+            if (p_FmPcd->enabled)
-+                p_FmPcd->numOfEnabledGuestPartitionsPcds++;
-+            *(uint8_t*)(p_IpcReply->replyBody)  = (uint8_t)p_FmPcd->enabled;
-+            p_IpcReply->error = E_OK;
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(uint8_t);
-+            break;
-+        case (FM_PCD_GUEST_DISABLE):
-+            if (p_FmPcd->numOfEnabledGuestPartitionsPcds)
-+            {
-+                p_FmPcd->numOfEnabledGuestPartitionsPcds--;
-+                p_IpcReply->error = E_OK;
-+            }
-+            else
-+            {
-+                REPORT_ERROR(MINOR, E_INVALID_STATE,("Trying to disable an unregistered partition"));
-+                p_IpcReply->error = E_INVALID_STATE;
-+            }
-+            *p_ReplyLength = sizeof(uint32_t);
-+            break;
-+        case (FM_PCD_GET_COUNTER):
-+        {
-+            e_FmPcdCounters inCounter;
-+            uint32_t        outCounter;
-+
-+            memcpy((uint8_t*)&inCounter, p_IpcMsg->msgBody, sizeof(uint32_t));
-+            outCounter = FM_PCD_GetCounter(h_FmPcd, inCounter);
-+            memcpy(p_IpcReply->replyBody, (uint8_t*)&outCounter, sizeof(uint32_t));
-+            p_IpcReply->error = E_OK;
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(uint32_t);
-+            break;
-+        }
-+        case (FM_PCD_ALLOC_KG_SCHEMES):
-+        {
-+            t_FmPcdIpcKgSchemesParams   ipcSchemesParams;
-+
-+            memcpy((uint8_t*)&ipcSchemesParams, p_IpcMsg->msgBody, sizeof(t_FmPcdIpcKgSchemesParams));
-+            err = FmPcdKgAllocSchemes(h_FmPcd,
-+                                      ipcSchemesParams.numOfSchemes,
-+                                      ipcSchemesParams.guestId,
-+                                      p_IpcReply->replyBody);
-+            p_IpcReply->error = err;
-+            *p_ReplyLength = sizeof(uint32_t) + ipcSchemesParams.numOfSchemes*sizeof(uint8_t);
-+            break;
-+        }
-+        case (FM_PCD_FREE_KG_SCHEMES):
-+        {
-+            t_FmPcdIpcKgSchemesParams   ipcSchemesParams;
-+
-+            memcpy((uint8_t*)&ipcSchemesParams, p_IpcMsg->msgBody, sizeof(t_FmPcdIpcKgSchemesParams));
-+            err = FmPcdKgFreeSchemes(h_FmPcd,
-+                                     ipcSchemesParams.numOfSchemes,
-+                                     ipcSchemesParams.guestId,
-+                                     ipcSchemesParams.schemesIds);
-+            p_IpcReply->error = err;
-+            *p_ReplyLength = sizeof(uint32_t);
-+            break;
-+        }
-+        case (FM_PCD_ALLOC_KG_CLSPLAN):
-+        {
-+            t_FmPcdIpcKgClsPlanParams   ipcKgClsPlanParams;
-+
-+            memcpy((uint8_t*)&ipcKgClsPlanParams, p_IpcMsg->msgBody, sizeof(t_FmPcdIpcKgClsPlanParams));
-+            err = KgAllocClsPlanEntries(h_FmPcd,
-+                                        ipcKgClsPlanParams.numOfClsPlanEntries,
-+                                        ipcKgClsPlanParams.guestId,
-+                                        p_IpcReply->replyBody);
-+            p_IpcReply->error = err;
-+            *p_ReplyLength =  sizeof(uint32_t) + sizeof(uint8_t);
-+            break;
-+        }
-+        case (FM_PCD_FREE_KG_CLSPLAN):
-+        {
-+            t_FmPcdIpcKgClsPlanParams   ipcKgClsPlanParams;
-+
-+            memcpy((uint8_t*)&ipcKgClsPlanParams, p_IpcMsg->msgBody, sizeof(t_FmPcdIpcKgClsPlanParams));
-+            KgFreeClsPlanEntries(h_FmPcd,
-+                                 ipcKgClsPlanParams.numOfClsPlanEntries,
-+                                 ipcKgClsPlanParams.guestId,
-+                                 ipcKgClsPlanParams.clsPlanBase);
-+            *p_ReplyLength = sizeof(uint32_t);
-+            break;
-+        }
-+        case (FM_PCD_ALLOC_PROFILES):
-+        {
-+            t_FmIpcResourceAllocParams      ipcAllocParams;
-+            uint16_t                        base;
-+            memcpy(&ipcAllocParams, p_IpcMsg->msgBody, sizeof(t_FmIpcResourceAllocParams));
-+            base =  PlcrAllocProfilesForPartition(h_FmPcd,
-+                                                  ipcAllocParams.base,
-+                                                  ipcAllocParams.num,
-+                                                  ipcAllocParams.guestId);
-+            memcpy(p_IpcReply->replyBody, (uint16_t*)&base, sizeof(uint16_t));
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(uint16_t);
-+            break;
-+        }
-+        case (FM_PCD_FREE_PROFILES):
-+        {
-+            t_FmIpcResourceAllocParams   ipcAllocParams;
-+            memcpy(&ipcAllocParams, p_IpcMsg->msgBody, sizeof(t_FmIpcResourceAllocParams));
-+            PlcrFreeProfilesForPartition(h_FmPcd,
-+                                         ipcAllocParams.base,
-+                                         ipcAllocParams.num,
-+                                         ipcAllocParams.guestId);
-+            break;
-+        }
-+        case (FM_PCD_SET_PORT_PROFILES):
-+        {
-+            t_FmIpcResourceAllocParams   ipcAllocParams;
-+            memcpy(&ipcAllocParams, p_IpcMsg->msgBody, sizeof(t_FmIpcResourceAllocParams));
-+            PlcrSetPortProfiles(h_FmPcd,
-+                                ipcAllocParams.guestId,
-+                                ipcAllocParams.num,
-+                                ipcAllocParams.base);
-+            break;
-+        }
-+        case (FM_PCD_CLEAR_PORT_PROFILES):
-+        {
-+            t_FmIpcResourceAllocParams   ipcAllocParams;
-+            memcpy(&ipcAllocParams, p_IpcMsg->msgBody, sizeof(t_FmIpcResourceAllocParams));
-+            PlcrClearPortProfiles(h_FmPcd,
-+                                  ipcAllocParams.guestId);
-+            break;
-+        }
-+        case (FM_PCD_GET_SW_PRS_OFFSET):
-+        {
-+            t_FmPcdIpcSwPrsLable   ipcSwPrsLable;
-+            uint32_t               swPrsOffset;
-+
-+            memcpy((uint8_t*)&ipcSwPrsLable, p_IpcMsg->msgBody, sizeof(t_FmPcdIpcSwPrsLable));
-+            swPrsOffset =
-+                FmPcdGetSwPrsOffset(h_FmPcd,
-+                                    (e_NetHeaderType)ipcSwPrsLable.enumHdr,
-+                                    ipcSwPrsLable.indexPerHdr);
-+            memcpy(p_IpcReply->replyBody, (uint8_t*)&swPrsOffset, sizeof(uint32_t));
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(uint32_t);
-+            break;
-+        }
-+        case (FM_PCD_PRS_INC_PORT_STATS):
-+        {
-+            t_FmPcdIpcPrsIncludePort   ipcPrsIncludePort;
-+
-+            memcpy((uint8_t*)&ipcPrsIncludePort, p_IpcMsg->msgBody, sizeof(t_FmPcdIpcPrsIncludePort));
-+            PrsIncludePortInStatistics(h_FmPcd,
-+                                       ipcPrsIncludePort.hardwarePortId,
-+                                       ipcPrsIncludePort.include);
-+           break;
-+        }
-+        default:
-+            *p_ReplyLength = 0;
-+            RETURN_ERROR(MINOR, E_INVALID_SELECTION, ("command not found!!!"));
-+    }
-+    return E_OK;
-+}
-+
-+static uint32_t NetEnvLock(t_Handle h_NetEnv)
-+{
-+    ASSERT_COND(h_NetEnv);
-+    return XX_LockIntrSpinlock(((t_FmPcdNetEnv*)h_NetEnv)->h_Spinlock);
-+}
-+
-+static void NetEnvUnlock(t_Handle h_NetEnv, uint32_t intFlags)
-+{
-+    ASSERT_COND(h_NetEnv);
-+    XX_UnlockIntrSpinlock(((t_FmPcdNetEnv*)h_NetEnv)->h_Spinlock, intFlags);
-+}
-+
-+static void EnqueueLockToFreeLst(t_FmPcd *p_FmPcd, t_FmPcdLock *p_Lock)
-+{
-+    uint32_t   intFlags;
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmPcd->h_Spinlock);
-+    LIST_AddToTail(&p_Lock->node, &p_FmPcd->freeLocksLst);
-+    XX_UnlockIntrSpinlock(p_FmPcd->h_Spinlock, intFlags);
-+}
-+
-+static t_FmPcdLock * DequeueLockFromFreeLst(t_FmPcd *p_FmPcd)
-+{
-+    t_FmPcdLock *p_Lock = NULL;
-+    uint32_t    intFlags;
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmPcd->h_Spinlock);
-+    if (!LIST_IsEmpty(&p_FmPcd->freeLocksLst))
-+    {
-+        p_Lock = FM_PCD_LOCK_OBJ(p_FmPcd->freeLocksLst.p_Next);
-+        LIST_DelAndInit(&p_Lock->node);
-+    }
-+    if (p_FmPcd->h_Spinlock)
-+    	XX_UnlockIntrSpinlock(p_FmPcd->h_Spinlock, intFlags);
-+
-+    return p_Lock;
-+}
-+
-+static void EnqueueLockToAcquiredLst(t_FmPcd *p_FmPcd, t_FmPcdLock *p_Lock)
-+{
-+    uint32_t   intFlags;
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmPcd->h_Spinlock);
-+    LIST_AddToTail(&p_Lock->node, &p_FmPcd->acquiredLocksLst);
-+    XX_UnlockIntrSpinlock(p_FmPcd->h_Spinlock, intFlags);
-+}
-+
-+static t_Error FillFreeLocksLst(t_FmPcd *p_FmPcd)
-+{
-+    t_FmPcdLock *p_Lock;
-+    int         i;
-+
-+    for (i=0; i<10; i++)
-+    {
-+        p_Lock = (t_FmPcdLock *)XX_Malloc(sizeof(t_FmPcdLock));
-+        if (!p_Lock)
-+            RETURN_ERROR(MINOR, E_NO_MEMORY, ("FM-PCD lock obj!"));
-+        memset(p_Lock, 0, sizeof(t_FmPcdLock));
-+        INIT_LIST(&p_Lock->node);
-+        p_Lock->h_Spinlock = XX_InitSpinlock();
-+        if (!p_Lock->h_Spinlock)
-+        {
-+            XX_Free(p_Lock);
-+            RETURN_ERROR(MINOR, E_INVALID_STATE, ("FM-PCD spinlock obj!"));
-+        }
-+        EnqueueLockToFreeLst(p_FmPcd, p_Lock);
-+    }
-+
-+    return E_OK;
-+}
-+
-+static void ReleaseFreeLocksLst(t_FmPcd *p_FmPcd)
-+{
-+    t_FmPcdLock *p_Lock;
-+
-+    p_Lock = DequeueLockFromFreeLst(p_FmPcd);
-+    while (p_Lock)
-+    {
-+        XX_FreeSpinlock(p_Lock->h_Spinlock);
-+        XX_Free(p_Lock);
-+        p_Lock = DequeueLockFromFreeLst(p_FmPcd);
-+    }
-+}
-+
-+
-+
-+/*****************************************************************************/
-+/*              Inter-module API routines                                    */
-+/*****************************************************************************/
-+
-+void FmPcdSetClsPlanGrpId(t_FmPcd *p_FmPcd, uint8_t netEnvId, uint8_t clsPlanGrpId)
-+{
-+    ASSERT_COND(p_FmPcd);
-+    p_FmPcd->netEnvs[netEnvId].clsPlanGrpId = clsPlanGrpId;
-+}
-+
-+t_Error PcdGetClsPlanGrpParams(t_FmPcd *p_FmPcd, t_FmPcdKgInterModuleClsPlanGrpParams *p_GrpParams)
-+{
-+    uint8_t netEnvId = p_GrpParams->netEnvId;
-+    int     i, k, j;
-+
-+    ASSERT_COND(p_FmPcd);
-+    if (p_FmPcd->netEnvs[netEnvId].clsPlanGrpId != ILLEGAL_CLS_PLAN)
-+    {
-+        p_GrpParams->grpExists = TRUE;
-+        p_GrpParams->clsPlanGrpId = p_FmPcd->netEnvs[netEnvId].clsPlanGrpId;
-+        return E_OK;
-+    }
-+
-+    for (i=0; ((i < FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS) &&
-+              (p_FmPcd->netEnvs[netEnvId].units[i].hdrs[0].hdr != HEADER_TYPE_NONE)); i++)
-+    {
-+        for (k=0; ((k < FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS) &&
-+                   (p_FmPcd->netEnvs[netEnvId].units[i].hdrs[k].hdr != HEADER_TYPE_NONE)); k++)
-+        {
-+            /* if an option exists, add it to the opts list */
-+            if (p_FmPcd->netEnvs[netEnvId].units[i].hdrs[k].opt)
-+            {
-+                /* check if this option already exists, add if it doesn't */
-+                for (j = 0;j<p_GrpParams->numOfOptions;j++)
-+                {
-+                    if (p_GrpParams->options[j] == p_FmPcd->netEnvs[netEnvId].units[i].hdrs[k].opt)
-+                        break;
-+                }
-+                p_GrpParams->optVectors[j] |= p_FmPcd->netEnvs[netEnvId].unitsVectors[i];
-+                if (j == p_GrpParams->numOfOptions)
-+                {
-+                    p_GrpParams->options[p_GrpParams->numOfOptions] = p_FmPcd->netEnvs[netEnvId].units[i].hdrs[k].opt;
-+                    p_GrpParams->numOfOptions++;
-+                }
-+            }
-+        }
-+    }
-+
-+    if (p_GrpParams->numOfOptions == 0)
-+    {
-+        if (p_FmPcd->p_FmPcdKg->emptyClsPlanGrpId != ILLEGAL_CLS_PLAN)
-+        {
-+            p_GrpParams->grpExists = TRUE;
-+            p_GrpParams->clsPlanGrpId = p_FmPcd->p_FmPcdKg->emptyClsPlanGrpId;
-+        }
-+    }
-+
-+    return E_OK;
-+
-+}
-+
-+t_Error PcdGetVectorForOpt(t_FmPcd *p_FmPcd, uint8_t netEnvId, protocolOpt_t opt, uint32_t *p_Vector)
-+{
-+    uint8_t     j,k;
-+
-+    *p_Vector = 0;
-+
-+    ASSERT_COND(p_FmPcd);
-+    for (j=0; ((j < FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS) &&
-+              (p_FmPcd->netEnvs[netEnvId].units[j].hdrs[0].hdr != HEADER_TYPE_NONE)); j++)
-+    {
-+        for (k=0; ((k < FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS) &&
-+                  (p_FmPcd->netEnvs[netEnvId].units[j].hdrs[k].hdr != HEADER_TYPE_NONE)); k++)
-+        {
-+            if (p_FmPcd->netEnvs[netEnvId].units[j].hdrs[k].opt == opt)
-+                *p_Vector |= p_FmPcd->netEnvs[netEnvId].unitsVectors[j];
-+        }
-+    }
-+
-+    if (!*p_Vector)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Requested option was not defined for this Network Environment Characteristics module"));
-+    else
-+        return E_OK;
-+}
-+
-+t_Error PcdGetUnitsVector(t_FmPcd *p_FmPcd, t_NetEnvParams *p_Params)
-+{
-+    int                     i;
-+
-+    ASSERT_COND(p_FmPcd);
-+    ASSERT_COND(p_Params->netEnvId < FM_MAX_NUM_OF_PORTS);
-+
-+    p_Params->vector = 0;
-+    for (i=0; i<p_Params->numOfDistinctionUnits ;i++)
-+    {
-+        if (p_FmPcd->netEnvs[p_Params->netEnvId].units[p_Params->unitIds[i]].hdrs[0].hdr == HEADER_TYPE_NONE)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Requested unit was not defined for this Network Environment Characteristics module"));
-+        ASSERT_COND(p_FmPcd->netEnvs[p_Params->netEnvId].unitsVectors[p_Params->unitIds[i]]);
-+        p_Params->vector |= p_FmPcd->netEnvs[p_Params->netEnvId].unitsVectors[p_Params->unitIds[i]];
-+    }
-+
-+    return E_OK;
-+}
-+
-+bool PcdNetEnvIsUnitWithoutOpts(t_FmPcd *p_FmPcd, uint8_t netEnvId, uint32_t unitVector)
-+{
-+    int     i=0, k;
-+
-+    ASSERT_COND(p_FmPcd);
-+    /* check whether a given unit may be used by non-clsPlan users. */
-+    /* first, recognize the unit by its vector */
-+    while (p_FmPcd->netEnvs[netEnvId].units[i].hdrs[0].hdr != HEADER_TYPE_NONE)
-+    {
-+        if (p_FmPcd->netEnvs[netEnvId].unitsVectors[i] == unitVector)
-+        {
-+            for (k=0;
-+                 ((k < FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS) &&
-+                  (p_FmPcd->netEnvs[netEnvId].units[i].hdrs[k].hdr != HEADER_TYPE_NONE));
-+                 k++)
-+                /* check that no option exists */
-+                if ((protocolOpt_t)p_FmPcd->netEnvs[netEnvId].units[i].hdrs[k].opt)
-+                    return FALSE;
-+            break;
-+        }
-+        i++;
-+    }
-+    /* assert that a unit was found to mach the vector */
-+    ASSERT_COND(p_FmPcd->netEnvs[netEnvId].units[i].hdrs[0].hdr != HEADER_TYPE_NONE);
-+
-+    return TRUE;
-+}
-+bool  FmPcdNetEnvIsHdrExist(t_Handle h_FmPcd, uint8_t netEnvId, e_NetHeaderType hdr)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    int         i, k;
-+
-+    ASSERT_COND(p_FmPcd);
-+
-+    for (i=0; ((i < FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS) &&
-+              (p_FmPcd->netEnvs[netEnvId].units[i].hdrs[0].hdr != HEADER_TYPE_NONE)); i++)
-+    {
-+        for (k=0; ((k < FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS) &&
-+                  (p_FmPcd->netEnvs[netEnvId].units[i].hdrs[k].hdr != HEADER_TYPE_NONE)); k++)
-+            if (p_FmPcd->netEnvs[netEnvId].units[i].hdrs[k].hdr == hdr)
-+                return TRUE;
-+    }
-+    for (i=0; ((i < FM_PCD_MAX_NUM_OF_ALIAS_HDRS) &&
-+              (p_FmPcd->netEnvs[netEnvId].aliasHdrs[i].hdr != HEADER_TYPE_NONE)); i++)
-+    {
-+        if (p_FmPcd->netEnvs[netEnvId].aliasHdrs[i].hdr == hdr)
-+            return TRUE;
-+    }
-+
-+    return FALSE;
-+}
-+
-+uint8_t FmPcdNetEnvGetUnitId(t_FmPcd *p_FmPcd, uint8_t netEnvId, e_NetHeaderType hdr, bool interchangeable, protocolOpt_t opt)
-+{
-+    uint8_t     i, k;
-+
-+    ASSERT_COND(p_FmPcd);
-+
-+    if (interchangeable)
-+    {
-+        for (i=0; (i < FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS) &&
-+                 (p_FmPcd->netEnvs[netEnvId].units[i].hdrs[0].hdr != HEADER_TYPE_NONE); i++)
-+        {
-+            for (k=0; (k < FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS) &&
-+                     (p_FmPcd->netEnvs[netEnvId].units[i].hdrs[k].hdr != HEADER_TYPE_NONE); k++)
-+            {
-+                if ((p_FmPcd->netEnvs[netEnvId].units[i].hdrs[k].hdr == hdr) &&
-+                    (p_FmPcd->netEnvs[netEnvId].units[i].hdrs[k].opt == opt))
-+
-+                return i;
-+            }
-+        }
-+    }
-+    else
-+    {
-+        for (i=0; (i < FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS) &&
-+                 (p_FmPcd->netEnvs[netEnvId].units[i].hdrs[0].hdr != HEADER_TYPE_NONE); i++)
-+            if ((p_FmPcd->netEnvs[netEnvId].units[i].hdrs[0].hdr == hdr) &&
-+                (p_FmPcd->netEnvs[netEnvId].units[i].hdrs[0].opt == opt) &&
-+                (p_FmPcd->netEnvs[netEnvId].units[i].hdrs[1].hdr == HEADER_TYPE_NONE))
-+                    return i;
-+
-+        for (i=0; (i < FM_PCD_MAX_NUM_OF_ALIAS_HDRS) &&
-+                 (p_FmPcd->netEnvs[netEnvId].aliasHdrs[i].hdr != HEADER_TYPE_NONE); i++)
-+            if ((p_FmPcd->netEnvs[netEnvId].aliasHdrs[i].hdr == hdr) &&
-+                (p_FmPcd->netEnvs[netEnvId].aliasHdrs[i].opt == opt))
-+                return p_FmPcd->netEnvs[netEnvId].aliasHdrs[i].aliasHdr;
-+    }
-+
-+    return FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS;
-+}
-+
-+t_Error FmPcdUnregisterReassmPort(t_Handle h_FmPcd, t_Handle h_ReasmCommonPramTbl)
-+{
-+    t_FmPcd                         *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    t_FmPcdCcReassmTimeoutParams    ccReassmTimeoutParams = {0};
-+    uint8_t                         result;
-+    t_Error                         err = E_OK;
-+
-+    ASSERT_COND(p_FmPcd);
-+    ASSERT_COND(h_ReasmCommonPramTbl);
-+
-+    ccReassmTimeoutParams.iprcpt   = (uint32_t)(XX_VirtToPhys(h_ReasmCommonPramTbl) - p_FmPcd->physicalMuramBase);
-+    ccReassmTimeoutParams.activate = FALSE; /*Disable Timeout Task*/
-+
-+    if ((err = FmHcPcdCcTimeoutReassm(p_FmPcd->h_Hc, &ccReassmTimeoutParams, &result)) != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    switch (result)
-+    {
-+        case (0):
-+            return E_OK;
-+        case (1):
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, (""));
-+        case (2):
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, (""));
-+        case (3):
-+            RETURN_ERROR(MAJOR, E_INVALID_HANDLE, ("Disable Timeout Task with invalid IPRCPT"));
-+        default:
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, NO_MSG);
-+    }
-+
-+    return E_OK;
-+}
-+
-+e_NetHeaderType FmPcdGetAliasHdr(t_FmPcd *p_FmPcd, uint8_t netEnvId, e_NetHeaderType hdr)
-+{
-+    int         i;
-+
-+    ASSERT_COND(p_FmPcd);
-+    ASSERT_COND(netEnvId < FM_MAX_NUM_OF_PORTS);
-+
-+    for (i=0; (i < FM_PCD_MAX_NUM_OF_ALIAS_HDRS)
-+        && (p_FmPcd->netEnvs[netEnvId].aliasHdrs[i].hdr != HEADER_TYPE_NONE); i++)
-+    {
-+        if (p_FmPcd->netEnvs[netEnvId].aliasHdrs[i].hdr == hdr)
-+            return p_FmPcd->netEnvs[netEnvId].aliasHdrs[i].aliasHdr;
-+    }
-+
-+    return HEADER_TYPE_NONE;
-+}
-+
-+void   FmPcdPortRegister(t_Handle h_FmPcd, t_Handle h_FmPort, uint8_t hardwarePortId)
-+{
-+    t_FmPcd         *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint16_t        swPortIndex = 0;
-+
-+    ASSERT_COND(h_FmPcd);
-+    HW_PORT_ID_TO_SW_PORT_INDX(swPortIndex, hardwarePortId);
-+    p_FmPcd->p_FmPcdPlcr->portsMapping[swPortIndex].h_FmPort = h_FmPort;
-+}
-+
-+uint32_t FmPcdGetLcv(t_Handle h_FmPcd, uint32_t netEnvId, uint8_t hdrNum)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    ASSERT_COND(h_FmPcd);
-+    return p_FmPcd->netEnvs[netEnvId].lcvs[hdrNum];
-+}
-+
-+uint32_t FmPcdGetMacsecLcv(t_Handle h_FmPcd, uint32_t netEnvId)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    ASSERT_COND(h_FmPcd);
-+    return p_FmPcd->netEnvs[netEnvId].macsecVector;
-+}
-+
-+uint8_t FmPcdGetNetEnvId(t_Handle h_NetEnv)
-+{
-+    return ((t_FmPcdNetEnv*)h_NetEnv)->netEnvId;
-+}
-+
-+void FmPcdIncNetEnvOwners(t_Handle h_FmPcd, uint8_t netEnvId)
-+{
-+    uint32_t    intFlags;
-+
-+    ASSERT_COND(h_FmPcd);
-+
-+    intFlags = NetEnvLock(&((t_FmPcd*)h_FmPcd)->netEnvs[netEnvId]);
-+    ((t_FmPcd*)h_FmPcd)->netEnvs[netEnvId].owners++;
-+    NetEnvUnlock(&((t_FmPcd*)h_FmPcd)->netEnvs[netEnvId], intFlags);
-+}
-+
-+void FmPcdDecNetEnvOwners(t_Handle h_FmPcd, uint8_t netEnvId)
-+{
-+    uint32_t    intFlags;
-+
-+    ASSERT_COND(h_FmPcd);
-+    ASSERT_COND(((t_FmPcd*)h_FmPcd)->netEnvs[netEnvId].owners);
-+
-+    intFlags = NetEnvLock(&((t_FmPcd*)h_FmPcd)->netEnvs[netEnvId]);
-+    ((t_FmPcd*)h_FmPcd)->netEnvs[netEnvId].owners--;
-+    NetEnvUnlock(&((t_FmPcd*)h_FmPcd)->netEnvs[netEnvId], intFlags);
-+}
-+
-+uint32_t FmPcdLock(t_Handle h_FmPcd)
-+{
-+    ASSERT_COND(h_FmPcd);
-+    return XX_LockIntrSpinlock(((t_FmPcd*)h_FmPcd)->h_Spinlock);
-+}
-+
-+void FmPcdUnlock(t_Handle h_FmPcd, uint32_t intFlags)
-+{
-+    ASSERT_COND(h_FmPcd);
-+    XX_UnlockIntrSpinlock(((t_FmPcd*)h_FmPcd)->h_Spinlock, intFlags);
-+}
-+
-+t_FmPcdLock * FmPcdAcquireLock(t_Handle h_FmPcd)
-+{
-+    t_FmPcdLock *p_Lock;
-+    ASSERT_COND(h_FmPcd);
-+    p_Lock = DequeueLockFromFreeLst((t_FmPcd*)h_FmPcd);
-+    if (!p_Lock)
-+    {
-+        FillFreeLocksLst(h_FmPcd);
-+        p_Lock = DequeueLockFromFreeLst((t_FmPcd*)h_FmPcd);
-+    }
-+
-+    if (p_Lock)
-+        EnqueueLockToAcquiredLst((t_FmPcd*)h_FmPcd, p_Lock);
-+    return p_Lock;
-+}
-+
-+void FmPcdReleaseLock(t_Handle h_FmPcd, t_FmPcdLock *p_Lock)
-+{
-+    uint32_t intFlags;
-+    ASSERT_COND(h_FmPcd);
-+    intFlags = FmPcdLock(h_FmPcd);
-+    LIST_DelAndInit(&p_Lock->node);
-+    FmPcdUnlock(h_FmPcd, intFlags);
-+    EnqueueLockToFreeLst((t_FmPcd*)h_FmPcd, p_Lock);
-+}
-+
-+bool FmPcdLockTryLockAll(t_Handle h_FmPcd)
-+{
-+    uint32_t    intFlags;
-+    t_List      *p_Pos, *p_SavedPos=NULL;
-+
-+    ASSERT_COND(h_FmPcd);
-+    intFlags = FmPcdLock(h_FmPcd);
-+    LIST_FOR_EACH(p_Pos, &((t_FmPcd*)h_FmPcd)->acquiredLocksLst)
-+    {
-+        t_FmPcdLock *p_Lock = FM_PCD_LOCK_OBJ(p_Pos);
-+        if (!FmPcdLockTryLock(p_Lock))
-+        {
-+            p_SavedPos = p_Pos;
-+            break;
-+        }
-+    }
-+    if (p_SavedPos)
-+    {
-+        LIST_FOR_EACH(p_Pos, &((t_FmPcd*)h_FmPcd)->acquiredLocksLst)
-+        {
-+            t_FmPcdLock *p_Lock = FM_PCD_LOCK_OBJ(p_Pos);
-+            if (p_Pos == p_SavedPos)
-+                break;
-+            FmPcdLockUnlock(p_Lock);
-+        }
-+    }
-+    FmPcdUnlock(h_FmPcd, intFlags);
-+
-+    CORE_MemoryBarrier();
-+
-+    if (p_SavedPos)
-+        return FALSE;
-+
-+    return TRUE;
-+}
-+
-+void FmPcdLockUnlockAll(t_Handle h_FmPcd)
-+{
-+    uint32_t    intFlags;
-+    t_List      *p_Pos;
-+
-+    ASSERT_COND(h_FmPcd);
-+    intFlags = FmPcdLock(h_FmPcd);
-+    LIST_FOR_EACH(p_Pos, &((t_FmPcd*)h_FmPcd)->acquiredLocksLst)
-+    {
-+        t_FmPcdLock *p_Lock = FM_PCD_LOCK_OBJ(p_Pos);
-+        p_Lock->flag = FALSE;
-+    }
-+    FmPcdUnlock(h_FmPcd, intFlags);
-+
-+    CORE_MemoryBarrier();
-+}
-+
-+t_Error FmPcdHcSync(t_Handle h_FmPcd)
-+{
-+    ASSERT_COND(h_FmPcd);
-+    ASSERT_COND(((t_FmPcd*)h_FmPcd)->h_Hc);
-+
-+    return FmHcPcdSync(((t_FmPcd*)h_FmPcd)->h_Hc);
-+}
-+
-+t_Handle FmPcdGetHcHandle(t_Handle h_FmPcd)
-+{
-+    ASSERT_COND(h_FmPcd);
-+    return ((t_FmPcd*)h_FmPcd)->h_Hc;
-+}
-+
-+bool FmPcdIsAdvancedOffloadSupported(t_Handle h_FmPcd)
-+{
-+    ASSERT_COND(h_FmPcd);
-+    return ((t_FmPcd*)h_FmPcd)->advancedOffloadSupport;
-+}
-+/*********************** End of inter-module routines ************************/
-+
-+
-+/****************************************/
-+/*       API Init unit functions        */
-+/****************************************/
-+
-+t_Handle FM_PCD_Config(t_FmPcdParams *p_FmPcdParams)
-+{
-+    t_FmPcd             *p_FmPcd = NULL;
-+    t_FmPhysAddr        physicalMuramBase;
-+    uint8_t             i;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmPcdParams, E_INVALID_HANDLE,NULL);
-+
-+    p_FmPcd = (t_FmPcd *) XX_Malloc(sizeof(t_FmPcd));
-+    if (!p_FmPcd)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM PCD"));
-+        return NULL;
-+    }
-+    memset(p_FmPcd, 0, sizeof(t_FmPcd));
-+
-+    p_FmPcd->p_FmPcdDriverParam = (t_FmPcdDriverParam *) XX_Malloc(sizeof(t_FmPcdDriverParam));
-+    if (!p_FmPcd->p_FmPcdDriverParam)
-+    {
-+        XX_Free(p_FmPcd);
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM PCD Driver Param"));
-+        return NULL;
-+    }
-+    memset(p_FmPcd->p_FmPcdDriverParam, 0, sizeof(t_FmPcdDriverParam));
-+
-+    p_FmPcd->h_Fm = p_FmPcdParams->h_Fm;
-+    p_FmPcd->guestId = FmGetGuestId(p_FmPcd->h_Fm);
-+    p_FmPcd->h_FmMuram = FmGetMuramHandle(p_FmPcd->h_Fm);
-+    if (p_FmPcd->h_FmMuram)
-+    {
-+        FmGetPhysicalMuramBase(p_FmPcdParams->h_Fm, &physicalMuramBase);
-+        p_FmPcd->physicalMuramBase = (uint64_t)((uint64_t)(&physicalMuramBase)->low | ((uint64_t)(&physicalMuramBase)->high << 32));
-+    }
-+
-+    for (i = 0; i<FM_MAX_NUM_OF_PORTS; i++)
-+        p_FmPcd->netEnvs[i].clsPlanGrpId = ILLEGAL_CLS_PLAN;
-+
-+    if (p_FmPcdParams->useHostCommand)
-+    {
-+        t_FmHcParams    hcParams;
-+
-+        memset(&hcParams, 0, sizeof(hcParams));
-+        hcParams.h_Fm = p_FmPcd->h_Fm;
-+        hcParams.h_FmPcd = (t_Handle)p_FmPcd;
-+        memcpy((uint8_t*)&hcParams.params, (uint8_t*)&p_FmPcdParams->hc, sizeof(t_FmPcdHcParams));
-+        p_FmPcd->h_Hc = FmHcConfigAndInit(&hcParams);
-+        if (!p_FmPcd->h_Hc)
-+        {
-+            REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM PCD HC"));
-+            FM_PCD_Free(p_FmPcd);
-+            return NULL;
-+        }
-+    }
-+    else if (p_FmPcd->guestId != NCSW_MASTER_ID)
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("No Host Command defined for a guest partition."));
-+
-+    if (p_FmPcdParams->kgSupport)
-+    {
-+        p_FmPcd->p_FmPcdKg = (t_FmPcdKg *)KgConfig(p_FmPcd, p_FmPcdParams);
-+        if (!p_FmPcd->p_FmPcdKg)
-+        {
-+            REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM PCD Keygen"));
-+            FM_PCD_Free(p_FmPcd);
-+            return NULL;
-+        }
-+    }
-+
-+    if (p_FmPcdParams->plcrSupport)
-+    {
-+        p_FmPcd->p_FmPcdPlcr = (t_FmPcdPlcr *)PlcrConfig(p_FmPcd, p_FmPcdParams);
-+        if (!p_FmPcd->p_FmPcdPlcr)
-+        {
-+            REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM PCD Policer"));
-+            FM_PCD_Free(p_FmPcd);
-+            return NULL;
-+        }
-+    }
-+
-+    if (p_FmPcdParams->prsSupport)
-+    {
-+        p_FmPcd->p_FmPcdPrs = (t_FmPcdPrs *)PrsConfig(p_FmPcd, p_FmPcdParams);
-+        if (!p_FmPcd->p_FmPcdPrs)
-+        {
-+            REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM PCD Parser"));
-+            FM_PCD_Free(p_FmPcd);
-+            return NULL;
-+        }
-+    }
-+
-+    p_FmPcd->h_Spinlock = XX_InitSpinlock();
-+    if (!p_FmPcd->h_Spinlock)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM PCD spinlock"));
-+        FM_PCD_Free(p_FmPcd);
-+        return NULL;
-+    }
-+    INIT_LIST(&p_FmPcd->freeLocksLst);
-+    INIT_LIST(&p_FmPcd->acquiredLocksLst);
-+
-+    p_FmPcd->numOfEnabledGuestPartitionsPcds = 0;
-+
-+    p_FmPcd->f_Exception                = p_FmPcdParams->f_Exception;
-+    p_FmPcd->f_FmPcdIndexedException    = p_FmPcdParams->f_ExceptionId;
-+    p_FmPcd->h_App                      = p_FmPcdParams->h_App;
-+
-+    p_FmPcd->p_CcShadow                 = NULL;
-+    p_FmPcd->ccShadowSize               = 0;
-+    p_FmPcd->ccShadowAlign              = 0;
-+
-+    p_FmPcd->h_ShadowSpinlock = XX_InitSpinlock();
-+    if (!p_FmPcd->h_ShadowSpinlock)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM PCD shadow spinlock"));
-+        FM_PCD_Free(p_FmPcd);
-+        return NULL;
-+    }
-+
-+    return p_FmPcd;
-+}
-+
-+t_Error FM_PCD_Init(t_Handle h_FmPcd)
-+{
-+    t_FmPcd         *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    t_Error         err = E_OK;
-+    t_FmPcdIpcMsg   msg;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdDriverParam, E_INVALID_HANDLE);
-+
-+    FM_GetRevision(p_FmPcd->h_Fm, &p_FmPcd->fmRevInfo);
-+
-+    if (p_FmPcd->guestId != NCSW_MASTER_ID)
-+    {
-+        memset(p_FmPcd->fmPcdIpcHandlerModuleName, 0, (sizeof(char)) * MODULE_NAME_SIZE);
-+        if (Sprint (p_FmPcd->fmPcdIpcHandlerModuleName, "FM_PCD_%d_%d", FmGetId(p_FmPcd->h_Fm), NCSW_MASTER_ID) != 10)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Sprint failed"));
-+        memset(p_FmPcd->fmPcdModuleName, 0, (sizeof(char)) * MODULE_NAME_SIZE);
-+        if (Sprint (p_FmPcd->fmPcdModuleName, "FM_PCD_%d_%d",FmGetId(p_FmPcd->h_Fm), p_FmPcd->guestId) != (p_FmPcd->guestId<10 ? 10:11))
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Sprint failed"));
-+
-+        p_FmPcd->h_IpcSession = XX_IpcInitSession(p_FmPcd->fmPcdIpcHandlerModuleName, p_FmPcd->fmPcdModuleName);
-+        if (p_FmPcd->h_IpcSession)
-+        {
-+            t_FmPcdIpcReply         reply;
-+            uint32_t                replyLength;
-+            uint8_t                 isMasterAlive = 0;
-+
-+            memset(&msg, 0, sizeof(msg));
-+            memset(&reply, 0, sizeof(reply));
-+            msg.msgId = FM_PCD_MASTER_IS_ALIVE;
-+            msg.msgBody[0] = p_FmPcd->guestId;
-+            blockingFlag = TRUE;
-+
-+            do
-+            {
-+                replyLength = sizeof(uint32_t) + sizeof(isMasterAlive);
-+                if ((err = XX_IpcSendMessage(p_FmPcd->h_IpcSession,
-+                                             (uint8_t*)&msg,
-+                                             sizeof(msg.msgId)+sizeof(p_FmPcd->guestId),
-+                                             (uint8_t*)&reply,
-+                                             &replyLength,
-+                                             IpcMsgCompletionCB,
-+                                             h_FmPcd)) != E_OK)
-+                    REPORT_ERROR(MAJOR, err, NO_MSG);
-+                while (blockingFlag) ;
-+                if (replyLength != (sizeof(uint32_t) + sizeof(isMasterAlive)))
-+                    REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+                isMasterAlive = *(uint8_t*)(reply.replyBody);
-+            } while (!isMasterAlive);
-+        }
-+    }
-+
-+    CHECK_INIT_PARAMETERS(p_FmPcd, CheckFmPcdParameters);
-+
-+    if (p_FmPcd->p_FmPcdKg)
-+    {
-+        err = KgInit(p_FmPcd);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    if (p_FmPcd->p_FmPcdPlcr)
-+    {
-+        err = PlcrInit(p_FmPcd);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    if (p_FmPcd->p_FmPcdPrs)
-+    {
-+        err = PrsInit(p_FmPcd);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    if (p_FmPcd->guestId == NCSW_MASTER_ID)
-+    {
-+         /* register to inter-core messaging mechanism */
-+        memset(p_FmPcd->fmPcdModuleName, 0, (sizeof(char)) * MODULE_NAME_SIZE);
-+        if (Sprint (p_FmPcd->fmPcdModuleName, "FM_PCD_%d_%d",FmGetId(p_FmPcd->h_Fm),NCSW_MASTER_ID) != 10)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Sprint failed"));
-+        err = XX_IpcRegisterMsgHandler(p_FmPcd->fmPcdModuleName, IpcMsgHandlerCB, p_FmPcd, FM_PCD_MAX_REPLY_SIZE);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    /* IPv6 Frame-Id used for fragmentation */
-+    p_FmPcd->ipv6FrameIdAddr = PTR_TO_UINT(FM_MURAM_AllocMem(p_FmPcd->h_FmMuram, 4, 4));
-+    if (!p_FmPcd->ipv6FrameIdAddr)
-+    {
-+        FM_PCD_Free(p_FmPcd);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MURAM allocation for IPv6 Frame-Id"));
-+    }
-+    IOMemSet32(UINT_TO_PTR(p_FmPcd->ipv6FrameIdAddr), 0,  4);
-+
-+    /* CAPWAP Frame-Id used for fragmentation */
-+    p_FmPcd->capwapFrameIdAddr = PTR_TO_UINT(FM_MURAM_AllocMem(p_FmPcd->h_FmMuram, 2, 4));
-+    if (!p_FmPcd->capwapFrameIdAddr)
-+    {
-+        FM_PCD_Free(p_FmPcd);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MURAM allocation for CAPWAP Frame-Id"));
-+    }
-+    IOMemSet32(UINT_TO_PTR(p_FmPcd->capwapFrameIdAddr), 0,  2);
-+
-+    XX_Free(p_FmPcd->p_FmPcdDriverParam);
-+    p_FmPcd->p_FmPcdDriverParam = NULL;
-+
-+    FmRegisterPcd(p_FmPcd->h_Fm, p_FmPcd);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_Free(t_Handle h_FmPcd)
-+{
-+    t_FmPcd                             *p_FmPcd =(t_FmPcd *)h_FmPcd;
-+    t_Error                             err = E_OK;
-+
-+    if (p_FmPcd->ipv6FrameIdAddr)
-+        FM_MURAM_FreeMem(p_FmPcd->h_FmMuram, UINT_TO_PTR(p_FmPcd->ipv6FrameIdAddr));
-+
-+    if (p_FmPcd->capwapFrameIdAddr)
-+        FM_MURAM_FreeMem(p_FmPcd->h_FmMuram, UINT_TO_PTR(p_FmPcd->capwapFrameIdAddr));
-+
-+    if (p_FmPcd->enabled)
-+        FM_PCD_Disable(p_FmPcd);
-+
-+    if (p_FmPcd->p_FmPcdDriverParam)
-+    {
-+        XX_Free(p_FmPcd->p_FmPcdDriverParam);
-+        p_FmPcd->p_FmPcdDriverParam = NULL;
-+    }
-+
-+    if (p_FmPcd->p_FmPcdKg)
-+    {
-+        if ((err = KgFree(p_FmPcd)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        XX_Free(p_FmPcd->p_FmPcdKg);
-+        p_FmPcd->p_FmPcdKg = NULL;
-+    }
-+
-+    if (p_FmPcd->p_FmPcdPlcr)
-+    {
-+        PlcrFree(p_FmPcd);
-+        XX_Free(p_FmPcd->p_FmPcdPlcr);
-+        p_FmPcd->p_FmPcdPlcr = NULL;
-+    }
-+
-+    if (p_FmPcd->p_FmPcdPrs)
-+    {
-+        if (p_FmPcd->guestId == NCSW_MASTER_ID)
-+            PrsFree(p_FmPcd);
-+        XX_Free(p_FmPcd->p_FmPcdPrs);
-+        p_FmPcd->p_FmPcdPrs = NULL;
-+    }
-+
-+    if (p_FmPcd->h_Hc)
-+    {
-+        FmHcFree(p_FmPcd->h_Hc);
-+        p_FmPcd->h_Hc = NULL;
-+    }
-+
-+    XX_IpcUnregisterMsgHandler(p_FmPcd->fmPcdModuleName);
-+
-+    FmUnregisterPcd(p_FmPcd->h_Fm);
-+
-+    ReleaseFreeLocksLst(p_FmPcd);
-+
-+    if (p_FmPcd->h_Spinlock)
-+        XX_FreeSpinlock(p_FmPcd->h_Spinlock);
-+
-+    if (p_FmPcd->h_ShadowSpinlock)
-+        XX_FreeSpinlock(p_FmPcd->h_ShadowSpinlock);
-+
-+    XX_Free(p_FmPcd);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_ConfigException(t_Handle h_FmPcd, e_FmPcdExceptions exception, bool enable)
-+{
-+    t_FmPcd         *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint32_t        bitMask = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+
-+    if (p_FmPcd->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("FM_PCD_ConfigException - guest mode!"));
-+
-+    GET_FM_PCD_EXCEPTION_FLAG(bitMask, exception);
-+    if (bitMask)
-+    {
-+        if (enable)
-+            p_FmPcd->exceptions |= bitMask;
-+        else
-+            p_FmPcd->exceptions &= ~bitMask;
-+   }
-+    else
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Undefined exception"));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_ConfigHcFramesDataMemory(t_Handle h_FmPcd, uint8_t memId)
-+{
-+    t_FmPcd         *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->h_Hc, E_INVALID_HANDLE);
-+
-+    return FmHcSetFramesDataMemory(p_FmPcd->h_Hc, memId);
-+}
-+
-+t_Error FM_PCD_Enable(t_Handle h_FmPcd)
-+{
-+    t_FmPcd             *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    t_Error             err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcd, E_INVALID_HANDLE);
-+
-+    if (p_FmPcd->enabled)
-+        return E_OK;
-+
-+    if ((p_FmPcd->guestId != NCSW_MASTER_ID) &&
-+        p_FmPcd->h_IpcSession)
-+    {
-+        uint8_t         enabled;
-+        t_FmPcdIpcMsg   msg;
-+        t_FmPcdIpcReply reply;
-+        uint32_t        replyLength;
-+
-+        memset(&reply, 0, sizeof(reply));
-+        memset(&msg, 0, sizeof(msg));
-+        msg.msgId = FM_PCD_MASTER_IS_ENABLED;
-+        replyLength = sizeof(uint32_t) + sizeof(enabled);
-+        if ((err = XX_IpcSendMessage(p_FmPcd->h_IpcSession,
-+                                     (uint8_t*)&msg,
-+                                     sizeof(msg.msgId),
-+                                     (uint8_t*)&reply,
-+                                     &replyLength,
-+                                     NULL,
-+                                     NULL)) != E_OK)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        if (replyLength != sizeof(uint32_t) + sizeof(enabled))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+        p_FmPcd->enabled = (bool)!!(*(uint8_t*)(reply.replyBody));
-+        if (!p_FmPcd->enabled)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM-PCD master should be enabled first!"));
-+
-+        return E_OK;
-+    }
-+    else if (p_FmPcd->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("running in guest-mode without IPC!"));
-+
-+    if (p_FmPcd->p_FmPcdKg)
-+        KgEnable(p_FmPcd);
-+
-+    if (p_FmPcd->p_FmPcdPlcr)
-+        PlcrEnable(p_FmPcd);
-+
-+    if (p_FmPcd->p_FmPcdPrs)
-+        PrsEnable(p_FmPcd);
-+
-+    p_FmPcd->enabled = TRUE;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_Disable(t_Handle h_FmPcd)
-+{
-+    t_FmPcd             *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    t_Error             err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcd, E_INVALID_HANDLE);
-+
-+    if (!p_FmPcd->enabled)
-+        return E_OK;
-+
-+    if ((p_FmPcd->guestId != NCSW_MASTER_ID) &&
-+        p_FmPcd->h_IpcSession)
-+    {
-+        t_FmPcdIpcMsg       msg;
-+        t_FmPcdIpcReply     reply;
-+        uint32_t            replyLength;
-+
-+        memset(&reply, 0, sizeof(reply));
-+        memset(&msg, 0, sizeof(msg));
-+        msg.msgId = FM_PCD_GUEST_DISABLE;
-+        replyLength = sizeof(uint32_t);
-+        if ((err = XX_IpcSendMessage(p_FmPcd->h_IpcSession,
-+                                     (uint8_t*)&msg,
-+                                     sizeof(msg.msgId),
-+                                     (uint8_t*)&reply,
-+                                     &replyLength,
-+                                     NULL,
-+                                     NULL)) != E_OK)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        if (replyLength != sizeof(uint32_t))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+        if (reply.error == E_OK)
-+            p_FmPcd->enabled = FALSE;
-+
-+        return (t_Error)(reply.error);
-+    }
-+    else if (p_FmPcd->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("running in guest-mode without IPC!"));
-+
-+    if (p_FmPcd->numOfEnabledGuestPartitionsPcds != 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                     ("Trying to disable a master partition PCD while"
-+                      "guest partitions are still enabled!"));
-+
-+    if (p_FmPcd->p_FmPcdKg)
-+         KgDisable(p_FmPcd);
-+
-+    if (p_FmPcd->p_FmPcdPlcr)
-+        PlcrDisable(p_FmPcd);
-+
-+    if (p_FmPcd->p_FmPcdPrs)
-+        PrsDisable(p_FmPcd);
-+
-+    p_FmPcd->enabled = FALSE;
-+
-+    return E_OK;
-+}
-+
-+t_Handle FM_PCD_NetEnvCharacteristicsSet(t_Handle h_FmPcd, t_FmPcdNetEnvParams  *p_NetEnvParams)
-+{
-+    t_FmPcd                 *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint32_t                intFlags, specialUnits = 0;
-+    uint8_t                 bitId = 0;
-+    uint8_t                 i, j, k;
-+    uint8_t                 netEnvCurrId;
-+    uint8_t                 ipsecAhUnit = 0,ipsecEspUnit = 0;
-+    bool                    ipsecAhExists = FALSE, ipsecEspExists = FALSE, shim1Selected = FALSE;
-+    uint8_t                 hdrNum;
-+    t_FmPcdNetEnvParams     *p_ModifiedNetEnvParams;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmPcd, E_INVALID_STATE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmPcd->p_FmPcdDriverParam, E_INVALID_STATE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(p_NetEnvParams, E_NULL_POINTER, NULL);
-+
-+    intFlags = FmPcdLock(p_FmPcd);
-+
-+    /* find a new netEnv */
-+    for (i = 0; i < FM_MAX_NUM_OF_PORTS; i++)
-+        if (!p_FmPcd->netEnvs[i].used)
-+            break;
-+
-+    if (i== FM_MAX_NUM_OF_PORTS)
-+    {
-+        REPORT_ERROR(MAJOR, E_FULL,("No more than %d netEnv's allowed.", FM_MAX_NUM_OF_PORTS));
-+        FmPcdUnlock(p_FmPcd, intFlags);
-+        return NULL;
-+    }
-+
-+    p_FmPcd->netEnvs[i].used = TRUE;
-+    FmPcdUnlock(p_FmPcd, intFlags);
-+
-+    /* As anyone doesn't have handle of this netEnv yet, no need
-+       to protect it with spinlocks */
-+
-+    p_ModifiedNetEnvParams = (t_FmPcdNetEnvParams *)XX_Malloc(sizeof(t_FmPcdNetEnvParams));
-+    if (!p_ModifiedNetEnvParams)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FmPcdNetEnvParams"));
-+        return NULL;
-+    }
-+
-+    memcpy(p_ModifiedNetEnvParams, p_NetEnvParams, sizeof(t_FmPcdNetEnvParams));
-+    p_NetEnvParams = p_ModifiedNetEnvParams;
-+
-+    netEnvCurrId = (uint8_t)i;
-+
-+    /* clear from previous use */
-+    memset(&p_FmPcd->netEnvs[netEnvCurrId].units, 0, FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS * sizeof(t_FmPcdIntDistinctionUnit));
-+    memset(&p_FmPcd->netEnvs[netEnvCurrId].aliasHdrs, 0, FM_PCD_MAX_NUM_OF_ALIAS_HDRS * sizeof(t_FmPcdNetEnvAliases));
-+    memcpy(&p_FmPcd->netEnvs[netEnvCurrId].units, p_NetEnvParams->units, p_NetEnvParams->numOfDistinctionUnits*sizeof(t_FmPcdIntDistinctionUnit));
-+
-+    p_FmPcd->netEnvs[netEnvCurrId].netEnvId = netEnvCurrId;
-+    p_FmPcd->netEnvs[netEnvCurrId].h_FmPcd = p_FmPcd;
-+
-+    p_FmPcd->netEnvs[netEnvCurrId].clsPlanGrpId = ILLEGAL_CLS_PLAN;
-+
-+    /* check that header with opt is not interchanged with the same header */
-+    for (i = 0; (i < FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS)
-+            && (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[0].hdr != HEADER_TYPE_NONE); i++)
-+    {
-+        for (k = 0; (k < FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS)
-+            && (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr != HEADER_TYPE_NONE); k++)
-+        {
-+            /* if an option exists, check that other headers are not the same header
-+            without option */
-+            if (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].opt)
-+            {
-+                for (j = 0; (j < FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS)
-+                        && (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[j].hdr != HEADER_TYPE_NONE); j++)
-+                {
-+                    if ((p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[j].hdr == p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr) &&
-+                        !p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[j].opt)
-+                    {
-+                        REPORT_ERROR(MINOR, E_FULL,
-+                                ("Illegal unit - header with opt may not be interchangeable with the same header without opt"));
-+                        XX_Free(p_ModifiedNetEnvParams);
-+                        return NULL;
-+                    }
-+                }
-+            }
-+        }
-+    }
-+
-+    /* Specific headers checking  */
-+    for (i = 0; (i < FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS)
-+        && (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[0].hdr != HEADER_TYPE_NONE); i++)
-+    {
-+        for (k = 0; (k < FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS)
-+            && (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr != HEADER_TYPE_NONE); k++)
-+        {
-+            /* Some headers pairs may not be defined on different units as the parser
-+            doesn't distinguish */
-+            /* IPSEC_AH and IPSEC_SPI can't be 2 units,  */
-+            /* check that header with opt is not interchanged with the same header */
-+            if (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr == HEADER_TYPE_IPSEC_AH)
-+            {
-+                if (ipsecEspExists && (ipsecEspUnit != i))
-+                {
-+                    REPORT_ERROR(MINOR, E_INVALID_STATE, ("HEADER_TYPE_IPSEC_AH and HEADER_TYPE_IPSEC_ESP may not be defined in separate units"));
-+                    XX_Free(p_ModifiedNetEnvParams);
-+                    return NULL;
-+                }
-+                else
-+                {
-+                    ipsecAhUnit = i;
-+                    ipsecAhExists = TRUE;
-+                }
-+            }
-+            if (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr == HEADER_TYPE_IPSEC_ESP)
-+            {
-+                if (ipsecAhExists && (ipsecAhUnit != i))
-+                {
-+                    REPORT_ERROR(MINOR, E_INVALID_STATE, ("HEADER_TYPE_IPSEC_AH and HEADER_TYPE_IPSEC_ESP may not be defined in separate units"));
-+                    XX_Free(p_ModifiedNetEnvParams);
-+                    return NULL;
-+                }
-+                else
-+                {
-+                    ipsecEspUnit = i;
-+                    ipsecEspExists = TRUE;
-+                }
-+            }
-+            /* ENCAP_ESP  */
-+            if (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr == HEADER_TYPE_UDP_ENCAP_ESP)
-+            {
-+                /* IPSec UDP encapsulation is currently set to use SHIM1 */
-+                p_FmPcd->netEnvs[netEnvCurrId].aliasHdrs[specialUnits].hdr = HEADER_TYPE_UDP_ENCAP_ESP;
-+                p_FmPcd->netEnvs[netEnvCurrId].aliasHdrs[specialUnits++].aliasHdr = HEADER_TYPE_USER_DEFINED_SHIM1;
-+                p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr = HEADER_TYPE_USER_DEFINED_SHIM1;
-+                p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].opt = 0;
-+            }
-+#if (DPAA_VERSION >= 11) || ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+            /* UDP_LITE  */
-+            if (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr == HEADER_TYPE_UDP_LITE)
-+            {
-+                p_FmPcd->netEnvs[netEnvCurrId].aliasHdrs[specialUnits].hdr = HEADER_TYPE_UDP_LITE;
-+                p_FmPcd->netEnvs[netEnvCurrId].aliasHdrs[specialUnits++].aliasHdr = HEADER_TYPE_UDP;
-+                p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr = HEADER_TYPE_UDP;
-+                p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].opt = 0;
-+            }
-+#endif /* (DPAA_VERSION >= 11) || ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
-+
-+            /* IP FRAG  */
-+            if ((p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr == HEADER_TYPE_IPv4) &&
-+                (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].opt == IPV4_FRAG_1))
-+            {
-+                /* If IPv4+Frag, we need to set 2 units - SHIM 2 and IPv4. We first set SHIM2, and than check if
-+                 * IPv4 exists. If so we don't need to set an extra unit
-+                 * We consider as "having IPv4" any IPv4 without interchangable headers
-+                 * but including any options.  */
-+                p_FmPcd->netEnvs[netEnvCurrId].aliasHdrs[specialUnits].hdr = HEADER_TYPE_IPv4;
-+                p_FmPcd->netEnvs[netEnvCurrId].aliasHdrs[specialUnits].opt = IPV4_FRAG_1;
-+                p_FmPcd->netEnvs[netEnvCurrId].aliasHdrs[specialUnits++].aliasHdr = HEADER_TYPE_USER_DEFINED_SHIM2;
-+                p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr = HEADER_TYPE_USER_DEFINED_SHIM2;
-+                p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].opt = 0;
-+
-+                /* check if IPv4 header exists by itself */
-+                if (FmPcdNetEnvGetUnitId(p_FmPcd, netEnvCurrId, HEADER_TYPE_IPv4, FALSE, 0) == FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS)
-+                {
-+                    p_FmPcd->netEnvs[netEnvCurrId].units[p_NetEnvParams->numOfDistinctionUnits].hdrs[0].hdr = HEADER_TYPE_IPv4;
-+                    p_FmPcd->netEnvs[netEnvCurrId].units[p_NetEnvParams->numOfDistinctionUnits++].hdrs[0].opt = 0;
-+                }
-+            }
-+            if ((p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr == HEADER_TYPE_IPv6) &&
-+                (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].opt == IPV6_FRAG_1))
-+            {
-+                /* If IPv6+Frag, we need to set 2 units - SHIM 2 and IPv6. We first set SHIM2, and than check if
-+                 * IPv4 exists. If so we don't need to set an extra unit
-+                 * We consider as "having IPv6" any IPv6 without interchangable headers
-+                 * but including any options.  */
-+                p_FmPcd->netEnvs[netEnvCurrId].aliasHdrs[specialUnits].hdr = HEADER_TYPE_IPv6;
-+                p_FmPcd->netEnvs[netEnvCurrId].aliasHdrs[specialUnits].opt = IPV6_FRAG_1;
-+                p_FmPcd->netEnvs[netEnvCurrId].aliasHdrs[specialUnits++].aliasHdr = HEADER_TYPE_USER_DEFINED_SHIM2;
-+                p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr = HEADER_TYPE_USER_DEFINED_SHIM2;
-+                p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].opt = 0;
-+
-+                /* check if IPv6 header exists by itself */
-+                if (FmPcdNetEnvGetUnitId(p_FmPcd, netEnvCurrId, HEADER_TYPE_IPv6, FALSE, 0) == FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS)
-+                {
-+                    p_FmPcd->netEnvs[netEnvCurrId].units[p_NetEnvParams->numOfDistinctionUnits].hdrs[0].hdr = HEADER_TYPE_IPv6;
-+                    p_FmPcd->netEnvs[netEnvCurrId].units[p_NetEnvParams->numOfDistinctionUnits++].hdrs[0].opt = 0;
-+                }
-+            }
-+#if (DPAA_VERSION >= 11)
-+            /* CAPWAP FRAG  */
-+            if ((p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr == HEADER_TYPE_CAPWAP) &&
-+                (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].opt == CAPWAP_FRAG_1))
-+            {
-+                p_FmPcd->netEnvs[netEnvCurrId].aliasHdrs[specialUnits].hdr = HEADER_TYPE_CAPWAP;
-+                p_FmPcd->netEnvs[netEnvCurrId].aliasHdrs[specialUnits].opt = CAPWAP_FRAG_1;
-+                p_FmPcd->netEnvs[netEnvCurrId].aliasHdrs[specialUnits++].aliasHdr = HEADER_TYPE_USER_DEFINED_SHIM2;
-+                p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr = HEADER_TYPE_USER_DEFINED_SHIM2;
-+                p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].opt = 0;
-+            }
-+#endif /* (DPAA_VERSION >= 11) */
-+        }
-+    }
-+
-+    /* if private header (shim), check that no other headers specified */
-+    for (i = 0; (i < FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS)
-+        && (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[0].hdr != HEADER_TYPE_NONE); i++)
-+    {
-+        if (IS_PRIVATE_HEADER(p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[0].hdr))
-+            if (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[1].hdr != HEADER_TYPE_NONE)
-+            {
-+                REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("SHIM header may not be interchanged with other headers"));
-+                XX_Free(p_ModifiedNetEnvParams);
-+                return NULL;
-+            }
-+    }
-+
-+    for (i = 0; i < p_NetEnvParams->numOfDistinctionUnits; i++)
-+    {
-+        if (IS_PRIVATE_HEADER(p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[0].hdr))
-+            switch (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[0].hdr)
-+            {
-+                case (HEADER_TYPE_USER_DEFINED_SHIM1):
-+                    if (shim1Selected)
-+                    {
-+                        REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("SHIM header cannot be selected with UDP_IPSEC_ESP"));
-+                        XX_Free(p_ModifiedNetEnvParams);
-+                        return NULL;
-+                    }
-+                    shim1Selected = TRUE;
-+                    p_FmPcd->netEnvs[netEnvCurrId].unitsVectors[i] = 0x00000001;
-+                    break;
-+                case (HEADER_TYPE_USER_DEFINED_SHIM2):
-+                    p_FmPcd->netEnvs[netEnvCurrId].unitsVectors[i] = 0x00000002;
-+                    break;
-+                default:
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Requested SHIM not supported"));
-+            }
-+        else
-+        {
-+            p_FmPcd->netEnvs[netEnvCurrId].unitsVectors[i] = (uint32_t)(0x80000000 >> bitId++);
-+
-+            if (IS_SPECIAL_HEADER(p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[0].hdr))
-+                p_FmPcd->netEnvs[netEnvCurrId].macsecVector = p_FmPcd->netEnvs[netEnvCurrId].unitsVectors[i];
-+        }
-+    }
-+
-+    /* define a set of hardware parser LCV's according to the defined netenv */
-+
-+    /* set an array of LCV's for each header in the netEnv */
-+    for (i = 0; (i < FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS)
-+        && (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[0].hdr != HEADER_TYPE_NONE); i++)
-+    {
-+        /* private headers have no LCV in the hard parser */
-+        if (!IS_PRIVATE_HEADER(p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[0].hdr))
-+        {
-+            for (k = 0; (k < FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS)
-+                    && (p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr != HEADER_TYPE_NONE); k++)
-+            {
-+                hdrNum = GetPrsHdrNum(p_FmPcd->netEnvs[netEnvCurrId].units[i].hdrs[k].hdr);
-+                if ((hdrNum == ILLEGAL_HDR_NUM) || (hdrNum == NO_HDR_NUM))
-+                {
-+                    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, NO_MSG);
-+                    XX_Free(p_ModifiedNetEnvParams);
-+                    return NULL;
-+                }
-+                p_FmPcd->netEnvs[netEnvCurrId].lcvs[hdrNum] |= p_FmPcd->netEnvs[netEnvCurrId].unitsVectors[i];
-+            }
-+        }
-+    }
-+    XX_Free(p_ModifiedNetEnvParams);
-+
-+    p_FmPcd->netEnvs[netEnvCurrId].h_Spinlock = XX_InitSpinlock();
-+    if (!p_FmPcd->netEnvs[netEnvCurrId].h_Spinlock)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM Pcd NetEnv spinlock"));
-+        return NULL;
-+    }
-+    return &p_FmPcd->netEnvs[netEnvCurrId];
-+}
-+
-+t_Error FM_PCD_NetEnvCharacteristicsDelete(t_Handle h_NetEnv)
-+{
-+    t_FmPcdNetEnv   *p_NetEnv = (t_FmPcdNetEnv*)h_NetEnv;
-+    t_FmPcd         *p_FmPcd = p_NetEnv->h_FmPcd;
-+    uint32_t        intFlags;
-+    uint8_t         netEnvId = p_NetEnv->netEnvId;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPcd->p_FmPcdDriverParam, E_INVALID_STATE);
-+
-+    /* check that no port is bound to this netEnv */
-+    if (p_FmPcd->netEnvs[netEnvId].owners)
-+    {
-+        RETURN_ERROR(MINOR, E_INVALID_STATE,
-+                ("Trying to delete a netEnv that has ports/schemes/trees/clsPlanGrps bound to"));
-+    }
-+
-+    intFlags = FmPcdLock(p_FmPcd);
-+
-+    p_FmPcd->netEnvs[netEnvId].used = FALSE;
-+    p_FmPcd->netEnvs[netEnvId].clsPlanGrpId = ILLEGAL_CLS_PLAN;
-+
-+    memset(p_FmPcd->netEnvs[netEnvId].units, 0, sizeof(t_FmPcdIntDistinctionUnit)*FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS);
-+    memset(p_FmPcd->netEnvs[netEnvId].unitsVectors, 0, sizeof(uint32_t)*FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS);
-+    memset(p_FmPcd->netEnvs[netEnvId].lcvs, 0, sizeof(uint32_t)*FM_PCD_PRS_NUM_OF_HDRS);
-+
-+    if (p_FmPcd->netEnvs[netEnvId].h_Spinlock)
-+        XX_FreeSpinlock(p_FmPcd->netEnvs[netEnvId].h_Spinlock);
-+
-+    FmPcdUnlock(p_FmPcd, intFlags);
-+    return E_OK;
-+}
-+
-+void FM_PCD_HcTxConf(t_Handle h_FmPcd, t_DpaaFD *p_Fd)
-+{
-+    t_FmPcd                 *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    SANITY_CHECK_RETURN(h_FmPcd, E_INVALID_STATE);
-+
-+    FmHcTxConf(p_FmPcd->h_Hc, p_Fd);
-+}
-+
-+t_Error FM_PCD_SetAdvancedOffloadSupport(t_Handle h_FmPcd)
-+{
-+    t_FmPcd                     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    t_FmCtrlCodeRevisionInfo    revInfo;
-+    t_Error                     err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPcd->p_FmPcdDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPcd->enabled, E_INVALID_STATE);
-+
-+    if ((err = FM_GetFmanCtrlCodeRevision(p_FmPcd->h_Fm, &revInfo)) != E_OK)
-+    {
-+        DBG(WARNING, ("FM in guest-mode without IPC, can't validate firmware revision."));
-+        revInfo.packageRev = IP_OFFLOAD_PACKAGE_NUMBER;
-+    }
-+    if (!IS_OFFLOAD_PACKAGE(revInfo.packageRev))
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("Fman ctrl code package"));
-+
-+    if (!p_FmPcd->h_Hc)
-+        RETURN_ERROR(MAJOR, E_INVALID_HANDLE, ("HC must be initialized in this mode"));
-+
-+    p_FmPcd->advancedOffloadSupport = TRUE;
-+
-+    return E_OK;
-+}
-+
-+uint32_t FM_PCD_GetCounter(t_Handle h_FmPcd, e_FmPcdCounters counter)
-+{
-+    t_FmPcd                 *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint32_t                outCounter = 0;
-+    t_Error                 err;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmPcd, E_INVALID_HANDLE, 0);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmPcd->p_FmPcdDriverParam, E_INVALID_STATE, 0);
-+
-+    switch (counter)
-+    {
-+        case (e_FM_PCD_KG_COUNTERS_TOTAL):
-+            if (!p_FmPcd->p_FmPcdKg)
-+            {
-+                REPORT_ERROR(MAJOR, E_INVALID_STATE, ("KeyGen is not activated"));
-+                return 0;
-+            }
-+            if ((p_FmPcd->guestId != NCSW_MASTER_ID) &&
-+                !p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs &&
-+                !p_FmPcd->h_IpcSession)
-+            {
-+                REPORT_ERROR(MINOR, E_NOT_SUPPORTED,
-+                             ("running in guest-mode without neither IPC nor mapped register!"));
-+                return 0;
-+            }
-+            break;
-+
-+        case (e_FM_PCD_PLCR_COUNTERS_YELLOW):
-+        case (e_FM_PCD_PLCR_COUNTERS_RED):
-+        case (e_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_RED):
-+        case (e_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_YELLOW):
-+        case (e_FM_PCD_PLCR_COUNTERS_TOTAL):
-+        case (e_FM_PCD_PLCR_COUNTERS_LENGTH_MISMATCH):
-+            if (!p_FmPcd->p_FmPcdPlcr)
-+            {
-+                REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Policer is not activated"));
-+                return 0;
-+            }
-+            if ((p_FmPcd->guestId != NCSW_MASTER_ID) &&
-+                !p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs &&
-+                !p_FmPcd->h_IpcSession)
-+            {
-+                REPORT_ERROR(MINOR, E_NOT_SUPPORTED,
-+                             ("running in \"guest-mode\" without neither IPC nor mapped register!"));
-+                return 0;
-+            }
-+
-+            /* check that counters are enabled */
-+            if (p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs &&
-+                !(GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_gcr) & FM_PCD_PLCR_GCR_STEN))
-+            {
-+                REPORT_ERROR(MINOR, E_INVALID_STATE, ("Requested counter was not enabled"));
-+                return 0;
-+            }
-+            ASSERT_COND(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs ||
-+                        ((p_FmPcd->guestId != NCSW_MASTER_ID) && p_FmPcd->h_IpcSession));
-+            break;
-+
-+        case (e_FM_PCD_PRS_COUNTERS_PARSE_DISPATCH):
-+        case (e_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED):
-+        case (e_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED):
-+        case (e_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED):
-+        case (e_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED):
-+        case (e_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED_WITH_ERR):
-+        case (e_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED_WITH_ERR):
-+        case (e_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED_WITH_ERR):
-+        case (e_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED_WITH_ERR):
-+        case (e_FM_PCD_PRS_COUNTERS_SOFT_PRS_CYCLES):
-+        case (e_FM_PCD_PRS_COUNTERS_SOFT_PRS_STALL_CYCLES):
-+        case (e_FM_PCD_PRS_COUNTERS_HARD_PRS_CYCLE_INCL_STALL_CYCLES):
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_READ_CYCLES):
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_READ_STALL_CYCLES):
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_WRITE_CYCLES):
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_WRITE_STALL_CYCLES):
-+        case (e_FM_PCD_PRS_COUNTERS_FPM_COMMAND_STALL_CYCLES):
-+            if (!p_FmPcd->p_FmPcdPrs)
-+            {
-+                REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Parser is not activated"));
-+                return 0;
-+            }
-+            if ((p_FmPcd->guestId != NCSW_MASTER_ID) &&
-+                !p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs &&
-+                !p_FmPcd->h_IpcSession)
-+            {
-+                REPORT_ERROR(MINOR, E_NOT_SUPPORTED,
-+                             ("running in guest-mode without neither IPC nor mapped register!"));
-+                return 0;
-+            }
-+            break;
-+        default:
-+            REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Unsupported type of counter"));
-+            return 0;
-+    }
-+
-+    if ((p_FmPcd->guestId != NCSW_MASTER_ID) &&
-+        p_FmPcd->h_IpcSession)
-+    {
-+        t_FmPcdIpcMsg           msg;
-+        t_FmPcdIpcReply         reply;
-+        uint32_t                replyLength;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_PCD_GET_COUNTER;
-+        memcpy(msg.msgBody, (uint8_t *)&counter, sizeof(uint32_t));
-+        replyLength = sizeof(uint32_t) + sizeof(uint32_t);
-+        if ((err = XX_IpcSendMessage(p_FmPcd->h_IpcSession,
-+                                     (uint8_t*)&msg,
-+                                     sizeof(msg.msgId) +sizeof(uint32_t),
-+                                     (uint8_t*)&reply,
-+                                     &replyLength,
-+                                     NULL,
-+                                     NULL)) != E_OK)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        if (replyLength != sizeof(uint32_t) + sizeof(uint32_t))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+
-+        memcpy((uint8_t*)&outCounter, reply.replyBody, sizeof(uint32_t));
-+        return outCounter;
-+    }
-+
-+    switch (counter)
-+    {
-+        /* Parser statistics */
-+        case (e_FM_PCD_PRS_COUNTERS_PARSE_DISPATCH):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_pds);
-+        case (e_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_l2rrs);
-+        case (e_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_l3rrs);
-+        case (e_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_l4rrs);
-+        case (e_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_srrs);
-+        case (e_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED_WITH_ERR):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_l2rres);
-+        case (e_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED_WITH_ERR):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_l3rres);
-+        case (e_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED_WITH_ERR):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_l4rres);
-+        case (e_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED_WITH_ERR):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_srres);
-+        case (e_FM_PCD_PRS_COUNTERS_SOFT_PRS_CYCLES):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_spcs);
-+        case (e_FM_PCD_PRS_COUNTERS_SOFT_PRS_STALL_CYCLES):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_spscs);
-+        case (e_FM_PCD_PRS_COUNTERS_HARD_PRS_CYCLE_INCL_STALL_CYCLES):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_hxscs);
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_READ_CYCLES):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_mrcs);
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_READ_STALL_CYCLES):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_mrscs);
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_WRITE_CYCLES):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_mwcs);
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_WRITE_STALL_CYCLES):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_mwscs);
-+        case (e_FM_PCD_PRS_COUNTERS_FPM_COMMAND_STALL_CYCLES):
-+               return GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_fcscs);
-+        case (e_FM_PCD_KG_COUNTERS_TOTAL):
-+               return GET_UINT32(p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs->fmkg_tpc);
-+
-+        /* Policer statistics */
-+        case (e_FM_PCD_PLCR_COUNTERS_YELLOW):
-+                return GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_ypcnt);
-+        case (e_FM_PCD_PLCR_COUNTERS_RED):
-+                return GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_rpcnt);
-+        case (e_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_RED):
-+                return GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_rrpcnt);
-+        case (e_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_YELLOW):
-+                return GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_rypcnt);
-+        case (e_FM_PCD_PLCR_COUNTERS_TOTAL):
-+                return GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_tpcnt);
-+        case (e_FM_PCD_PLCR_COUNTERS_LENGTH_MISMATCH):
-+                return GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_flmcnt);
-+    }
-+    return 0;
-+}
-+
-+t_Error FM_PCD_SetException(t_Handle h_FmPcd, e_FmPcdExceptions exception, bool enable)
-+{
-+    t_FmPcd         *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint32_t        bitMask = 0, tmpReg;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPcd->p_FmPcdDriverParam, E_INVALID_STATE);
-+
-+    if (p_FmPcd->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("FM_PCD_SetException - guest mode!"));
-+
-+    GET_FM_PCD_EXCEPTION_FLAG(bitMask, exception);
-+
-+    if (bitMask)
-+    {
-+        if (enable)
-+            p_FmPcd->exceptions |= bitMask;
-+        else
-+            p_FmPcd->exceptions &= ~bitMask;
-+
-+        switch (exception)
-+        {
-+            case (e_FM_PCD_KG_EXCEPTION_DOUBLE_ECC):
-+            case (e_FM_PCD_KG_EXCEPTION_KEYSIZE_OVERFLOW):
-+                if (!p_FmPcd->p_FmPcdKg)
-+                    RETURN_ERROR(MINOR, E_INVALID_STATE, ("Can't ask for this interrupt - keygen is not working"));
-+                break;
-+            case (e_FM_PCD_PLCR_EXCEPTION_DOUBLE_ECC):
-+            case (e_FM_PCD_PLCR_EXCEPTION_INIT_ENTRY_ERROR):
-+            case (e_FM_PCD_PLCR_EXCEPTION_PRAM_SELF_INIT_COMPLETE):
-+            case (e_FM_PCD_PLCR_EXCEPTION_ATOMIC_ACTION_COMPLETE):
-+                if (!p_FmPcd->p_FmPcdPlcr)
-+                    RETURN_ERROR(MINOR, E_INVALID_STATE, ("Can't ask for this interrupt - policer is not working"));
-+                break;
-+            case (e_FM_PCD_PRS_EXCEPTION_DOUBLE_ECC):
-+            case (e_FM_PCD_PRS_EXCEPTION_SINGLE_ECC):
-+                if (!p_FmPcd->p_FmPcdPrs)
-+                    RETURN_ERROR(MINOR, E_INVALID_STATE, ("Can't ask for this interrupt - parser is not working"));
-+                break;
-+        }
-+
-+        switch (exception)
-+        {
-+            case (e_FM_PCD_KG_EXCEPTION_DOUBLE_ECC):
-+                tmpReg = GET_UINT32(p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs->fmkg_eeer);
-+                if (enable)
-+                    tmpReg |= FM_EX_KG_DOUBLE_ECC;
-+                else
-+                    tmpReg &= ~FM_EX_KG_DOUBLE_ECC;
-+                WRITE_UINT32(p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs->fmkg_eeer, tmpReg);
-+                break;
-+            case (e_FM_PCD_KG_EXCEPTION_KEYSIZE_OVERFLOW):
-+                tmpReg = GET_UINT32(p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs->fmkg_eeer);
-+                if (enable)
-+                    tmpReg |= FM_EX_KG_KEYSIZE_OVERFLOW;
-+                else
-+                    tmpReg &= ~FM_EX_KG_KEYSIZE_OVERFLOW;
-+                WRITE_UINT32(p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs->fmkg_eeer, tmpReg);
-+                break;
-+            case (e_FM_PCD_PRS_EXCEPTION_DOUBLE_ECC):
-+                tmpReg = GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_perer);
-+                if (enable)
-+                    tmpReg |= FM_PCD_PRS_DOUBLE_ECC;
-+                else
-+                    tmpReg &= ~FM_PCD_PRS_DOUBLE_ECC;
-+                WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_perer, tmpReg);
-+                break;
-+            case (e_FM_PCD_PRS_EXCEPTION_SINGLE_ECC):
-+                tmpReg = GET_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_pever);
-+                if (enable)
-+                    tmpReg |= FM_PCD_PRS_SINGLE_ECC;
-+                else
-+                    tmpReg &= ~FM_PCD_PRS_SINGLE_ECC;
-+                WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_pever, tmpReg);
-+                break;
-+            case (e_FM_PCD_PLCR_EXCEPTION_DOUBLE_ECC):
-+                tmpReg = GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_eier);
-+                if (enable)
-+                    tmpReg |= FM_PCD_PLCR_DOUBLE_ECC;
-+                else
-+                    tmpReg &= ~FM_PCD_PLCR_DOUBLE_ECC;
-+                WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_eier, tmpReg);
-+                break;
-+            case (e_FM_PCD_PLCR_EXCEPTION_INIT_ENTRY_ERROR):
-+                tmpReg = GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_eier);
-+                if (enable)
-+                    tmpReg |= FM_PCD_PLCR_INIT_ENTRY_ERROR;
-+                else
-+                    tmpReg &= ~FM_PCD_PLCR_INIT_ENTRY_ERROR;
-+                WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_eier, tmpReg);
-+                break;
-+            case (e_FM_PCD_PLCR_EXCEPTION_PRAM_SELF_INIT_COMPLETE):
-+                tmpReg = GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_ier);
-+                if (enable)
-+                    tmpReg |= FM_PCD_PLCR_PRAM_SELF_INIT_COMPLETE;
-+                else
-+                    tmpReg &= ~FM_PCD_PLCR_PRAM_SELF_INIT_COMPLETE;
-+                WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_ier, tmpReg);
-+                break;
-+            case (e_FM_PCD_PLCR_EXCEPTION_ATOMIC_ACTION_COMPLETE):
-+                tmpReg = GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_ier);
-+                if (enable)
-+                    tmpReg |= FM_PCD_PLCR_ATOMIC_ACTION_COMPLETE;
-+                else
-+                    tmpReg &= ~FM_PCD_PLCR_ATOMIC_ACTION_COMPLETE;
-+                WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_ier, tmpReg);
-+                break;
-+        }
-+        /* for ECC exceptions driver automatically enables ECC mechanism, if disabled.
-+           Driver may disable them automatically, depending on driver's status */
-+        if (enable && ((exception == e_FM_PCD_KG_EXCEPTION_DOUBLE_ECC) |
-+                       (exception == e_FM_PCD_PLCR_EXCEPTION_DOUBLE_ECC) |
-+                       (exception == e_FM_PCD_PRS_EXCEPTION_DOUBLE_ECC) |
-+                       (exception == e_FM_PCD_PRS_EXCEPTION_SINGLE_ECC)))
-+            FmEnableRamsEcc(p_FmPcd->h_Fm);
-+        if (!enable && ((exception == e_FM_PCD_KG_EXCEPTION_DOUBLE_ECC) |
-+                       (exception == e_FM_PCD_PLCR_EXCEPTION_DOUBLE_ECC) |
-+                       (exception == e_FM_PCD_PRS_EXCEPTION_DOUBLE_ECC) |
-+                       (exception == e_FM_PCD_PRS_EXCEPTION_SINGLE_ECC)))
-+            FmDisableRamsEcc(p_FmPcd->h_Fm);
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_ForceIntr (t_Handle h_FmPcd, e_FmPcdExceptions exception)
-+{
-+    t_FmPcd            *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPcd->p_FmPcdDriverParam, E_INVALID_STATE);
-+
-+    if (p_FmPcd->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("FM_PCD_ForceIntr - guest mode!"));
-+
-+    switch (exception)
-+    {
-+        case (e_FM_PCD_KG_EXCEPTION_DOUBLE_ECC):
-+        case (e_FM_PCD_KG_EXCEPTION_KEYSIZE_OVERFLOW):
-+            if (!p_FmPcd->p_FmPcdKg)
-+                RETURN_ERROR(MINOR, E_INVALID_STATE, ("Can't ask for this interrupt - keygen is not working"));
-+            break;
-+        case (e_FM_PCD_PLCR_EXCEPTION_DOUBLE_ECC):
-+        case (e_FM_PCD_PLCR_EXCEPTION_INIT_ENTRY_ERROR):
-+        case (e_FM_PCD_PLCR_EXCEPTION_PRAM_SELF_INIT_COMPLETE):
-+        case (e_FM_PCD_PLCR_EXCEPTION_ATOMIC_ACTION_COMPLETE):
-+            if (!p_FmPcd->p_FmPcdPlcr)
-+                RETURN_ERROR(MINOR, E_INVALID_STATE, ("Can't ask for this interrupt - policer is not working"));
-+            break;
-+        case (e_FM_PCD_PRS_EXCEPTION_DOUBLE_ECC):
-+        case (e_FM_PCD_PRS_EXCEPTION_SINGLE_ECC):
-+           if (!p_FmPcd->p_FmPcdPrs)
-+                RETURN_ERROR(MINOR, E_INVALID_STATE, ("Can't ask for this interrupt -parsrer is not working"));
-+            break;
-+        default:
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Invalid interrupt requested"));
-+    }
-+    switch (exception)
-+    {
-+        case e_FM_PCD_PRS_EXCEPTION_DOUBLE_ECC:
-+            if (!(p_FmPcd->exceptions & FM_PCD_EX_PRS_DOUBLE_ECC))
-+                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception is masked"));
-+            break;
-+        case e_FM_PCD_PRS_EXCEPTION_SINGLE_ECC:
-+            if (!(p_FmPcd->exceptions & FM_PCD_EX_PRS_SINGLE_ECC))
-+                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception is masked"));
-+            break;
-+        case e_FM_PCD_KG_EXCEPTION_DOUBLE_ECC:
-+            if (!(p_FmPcd->exceptions & FM_EX_KG_DOUBLE_ECC))
-+                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception is masked"));
-+            WRITE_UINT32(p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs->fmkg_feer, FM_EX_KG_DOUBLE_ECC);
-+            break;
-+        case e_FM_PCD_KG_EXCEPTION_KEYSIZE_OVERFLOW:
-+            if (!(p_FmPcd->exceptions & FM_EX_KG_KEYSIZE_OVERFLOW))
-+                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception is masked"));
-+            WRITE_UINT32(p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs->fmkg_feer, FM_EX_KG_KEYSIZE_OVERFLOW);
-+            break;
-+        case e_FM_PCD_PLCR_EXCEPTION_DOUBLE_ECC:
-+            if (!(p_FmPcd->exceptions & FM_PCD_EX_PLCR_DOUBLE_ECC))
-+                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception is masked"));
-+            WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_eifr, FM_PCD_PLCR_DOUBLE_ECC);
-+            break;
-+        case e_FM_PCD_PLCR_EXCEPTION_INIT_ENTRY_ERROR:
-+            if (!(p_FmPcd->exceptions & FM_PCD_EX_PLCR_INIT_ENTRY_ERROR))
-+                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception is masked"));
-+            WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_eifr, FM_PCD_PLCR_INIT_ENTRY_ERROR);
-+            break;
-+        case e_FM_PCD_PLCR_EXCEPTION_PRAM_SELF_INIT_COMPLETE:
-+            if (!(p_FmPcd->exceptions & FM_PCD_EX_PLCR_PRAM_SELF_INIT_COMPLETE))
-+                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception is masked"));
-+            WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_ifr, FM_PCD_PLCR_PRAM_SELF_INIT_COMPLETE);
-+            break;
-+        case e_FM_PCD_PLCR_EXCEPTION_ATOMIC_ACTION_COMPLETE:
-+            if (!(p_FmPcd->exceptions & FM_PCD_EX_PLCR_ATOMIC_ACTION_COMPLETE))
-+                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception is masked"));
-+            WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_ifr, FM_PCD_PLCR_ATOMIC_ACTION_COMPLETE);
-+            break;
-+    }
-+
-+    return E_OK;
-+}
-+
-+
-+t_Error FM_PCD_ModifyCounter(t_Handle h_FmPcd, e_FmPcdCounters counter, uint32_t value)
-+{
-+    t_FmPcd            *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPcd->p_FmPcdDriverParam, E_INVALID_STATE);
-+
-+    if (p_FmPcd->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("FM_PCD_ModifyCounter - guest mode!"));
-+
-+    switch (counter)
-+    {
-+        case (e_FM_PCD_KG_COUNTERS_TOTAL):
-+            if (!p_FmPcd->p_FmPcdKg)
-+                RETURN_ERROR(MINOR, E_INVALID_STATE, ("Invalid counters - KeyGen is not working"));
-+            break;
-+        case (e_FM_PCD_PLCR_COUNTERS_YELLOW):
-+        case (e_FM_PCD_PLCR_COUNTERS_RED):
-+        case (e_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_RED):
-+        case (e_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_YELLOW):
-+        case (e_FM_PCD_PLCR_COUNTERS_TOTAL):
-+        case (e_FM_PCD_PLCR_COUNTERS_LENGTH_MISMATCH):
-+            if (!p_FmPcd->p_FmPcdPlcr)
-+                RETURN_ERROR(MINOR, E_INVALID_STATE, ("Invalid counters - Policer is not working"));
-+            if (!(GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_gcr) & FM_PCD_PLCR_GCR_STEN))
-+                RETURN_ERROR(MINOR, E_INVALID_STATE, ("Requested counter was not enabled"));
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_PARSE_DISPATCH):
-+        case (e_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED):
-+        case (e_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED):
-+        case (e_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED):
-+        case (e_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED):
-+        case (e_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED_WITH_ERR):
-+        case (e_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED_WITH_ERR):
-+        case (e_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED_WITH_ERR):
-+        case (e_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED_WITH_ERR):
-+        case (e_FM_PCD_PRS_COUNTERS_SOFT_PRS_CYCLES):
-+        case (e_FM_PCD_PRS_COUNTERS_SOFT_PRS_STALL_CYCLES):
-+        case (e_FM_PCD_PRS_COUNTERS_HARD_PRS_CYCLE_INCL_STALL_CYCLES):
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_READ_CYCLES):
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_READ_STALL_CYCLES):
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_WRITE_CYCLES):
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_WRITE_STALL_CYCLES):
-+        case (e_FM_PCD_PRS_COUNTERS_FPM_COMMAND_STALL_CYCLES):
-+            if (!p_FmPcd->p_FmPcdPrs)
-+                RETURN_ERROR(MINOR, E_INVALID_STATE, ("Unsupported type of counter"));
-+            break;
-+        default:
-+            RETURN_ERROR(MINOR, E_INVALID_STATE, ("Unsupported type of counter"));
-+    }
-+    switch (counter)
-+    {
-+        case (e_FM_PCD_PRS_COUNTERS_PARSE_DISPATCH):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_pds, value);
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_l2rrs, value);
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_l3rrs, value);
-+             break;
-+       case (e_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_l4rrs, value);
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_srrs, value);
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED_WITH_ERR):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_l2rres, value);
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED_WITH_ERR):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_l3rres, value);
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED_WITH_ERR):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_l4rres, value);
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED_WITH_ERR):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_srres, value);
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_SOFT_PRS_CYCLES):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_spcs, value);
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_SOFT_PRS_STALL_CYCLES):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_spscs, value);
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_HARD_PRS_CYCLE_INCL_STALL_CYCLES):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_hxscs, value);
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_READ_CYCLES):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_mrcs, value);
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_READ_STALL_CYCLES):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_mrscs, value);
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_WRITE_CYCLES):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_mwcs, value);
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_MURAM_WRITE_STALL_CYCLES):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_mwscs, value);
-+            break;
-+        case (e_FM_PCD_PRS_COUNTERS_FPM_COMMAND_STALL_CYCLES):
-+               WRITE_UINT32(p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs->fmpr_fcscs, value);
-+             break;
-+        case (e_FM_PCD_KG_COUNTERS_TOTAL):
-+            WRITE_UINT32(p_FmPcd->p_FmPcdKg->p_FmPcdKgRegs->fmkg_tpc,value);
-+            break;
-+
-+        /*Policer counters*/
-+        case (e_FM_PCD_PLCR_COUNTERS_YELLOW):
-+            WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_ypcnt, value);
-+            break;
-+        case (e_FM_PCD_PLCR_COUNTERS_RED):
-+            WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_rpcnt, value);
-+            break;
-+        case (e_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_RED):
-+             WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_rrpcnt, value);
-+            break;
-+        case (e_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_YELLOW):
-+              WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_rypcnt, value);
-+            break;
-+        case (e_FM_PCD_PLCR_COUNTERS_TOTAL):
-+              WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_tpcnt, value);
-+            break;
-+        case (e_FM_PCD_PLCR_COUNTERS_LENGTH_MISMATCH):
-+              WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_flmcnt, value);
-+            break;
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Handle FM_PCD_GetHcPort(t_Handle h_FmPcd)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    return FmHcGetPort(p_FmPcd->h_Hc);
-+}
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_pcd.h
-@@ -0,0 +1,543 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_pcd.h
-+
-+ @Description   FM PCD ...
-+*//***************************************************************************/
-+#ifndef __FM_PCD_H
-+#define __FM_PCD_H
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "list_ext.h"
-+#include "fm_pcd_ext.h"
-+#include "fm_common.h"
-+#include "fsl_fman_prs.h"
-+#include "fsl_fman_kg.h"
-+
-+#define __ERR_MODULE__  MODULE_FM_PCD
-+
-+
-+/****************************/
-+/* Defaults                 */
-+/****************************/
-+#define DEFAULT_plcrAutoRefresh                 FALSE
-+#define DEFAULT_fmPcdKgErrorExceptions          (FM_EX_KG_DOUBLE_ECC | FM_EX_KG_KEYSIZE_OVERFLOW)
-+#define DEFAULT_fmPcdPlcrErrorExceptions        (FM_PCD_EX_PLCR_DOUBLE_ECC | FM_PCD_EX_PLCR_INIT_ENTRY_ERROR)
-+#define DEFAULT_fmPcdPlcrExceptions             0
-+#define DEFAULT_fmPcdPrsErrorExceptions         (FM_PCD_EX_PRS_DOUBLE_ECC)
-+
-+#define DEFAULT_fmPcdPrsExceptions              FM_PCD_EX_PRS_SINGLE_ECC
-+#define DEFAULT_numOfUsedProfilesPerWindow      16
-+#define DEFAULT_numOfSharedPlcrProfiles         4
-+
-+/****************************/
-+/* Network defines          */
-+/****************************/
-+#define UDP_HEADER_SIZE     8
-+
-+#define ESP_SPI_OFFSET      0
-+#define ESP_SPI_SIZE        4
-+#define ESP_SEQ_NUM_OFFSET  ESP_SPI_SIZE
-+#define ESP_SEQ_NUM_SIZE    4
-+
-+/****************************/
-+/* General defines          */
-+/****************************/
-+#define ILLEGAL_CLS_PLAN    0xff
-+#define ILLEGAL_NETENV      0xff
-+
-+#define FM_PCD_MAX_NUM_OF_ALIAS_HDRS    3
-+
-+/****************************/
-+/* Error defines           */
-+/****************************/
-+
-+#define FM_PCD_EX_PLCR_DOUBLE_ECC                   0x20000000
-+#define FM_PCD_EX_PLCR_INIT_ENTRY_ERROR             0x10000000
-+#define FM_PCD_EX_PLCR_PRAM_SELF_INIT_COMPLETE      0x08000000
-+#define FM_PCD_EX_PLCR_ATOMIC_ACTION_COMPLETE       0x04000000
-+
-+#define GET_FM_PCD_EXCEPTION_FLAG(bitMask, exception)               \
-+switch (exception){                                                 \
-+    case e_FM_PCD_KG_EXCEPTION_DOUBLE_ECC:                          \
-+        bitMask = FM_EX_KG_DOUBLE_ECC; break;                   \
-+    case e_FM_PCD_PLCR_EXCEPTION_DOUBLE_ECC:                        \
-+        bitMask = FM_PCD_EX_PLCR_DOUBLE_ECC; break;                 \
-+    case e_FM_PCD_KG_EXCEPTION_KEYSIZE_OVERFLOW:                    \
-+        bitMask = FM_EX_KG_KEYSIZE_OVERFLOW; break;             \
-+    case e_FM_PCD_PLCR_EXCEPTION_INIT_ENTRY_ERROR:                  \
-+        bitMask = FM_PCD_EX_PLCR_INIT_ENTRY_ERROR; break;           \
-+    case e_FM_PCD_PLCR_EXCEPTION_PRAM_SELF_INIT_COMPLETE:           \
-+        bitMask = FM_PCD_EX_PLCR_PRAM_SELF_INIT_COMPLETE; break;    \
-+    case e_FM_PCD_PLCR_EXCEPTION_ATOMIC_ACTION_COMPLETE:            \
-+        bitMask = FM_PCD_EX_PLCR_ATOMIC_ACTION_COMPLETE; break;     \
-+    case e_FM_PCD_PRS_EXCEPTION_DOUBLE_ECC:                         \
-+        bitMask = FM_PCD_EX_PRS_DOUBLE_ECC; break;                  \
-+    case e_FM_PCD_PRS_EXCEPTION_SINGLE_ECC:                         \
-+        bitMask = FM_PCD_EX_PRS_SINGLE_ECC; break;                  \
-+    default: bitMask = 0;break;}
-+
-+/***********************************************************************/
-+/*          Policer defines                                            */
-+/***********************************************************************/
-+#define FM_PCD_PLCR_GCR_STEN                  0x40000000
-+#define FM_PCD_PLCR_DOUBLE_ECC                0x80000000
-+#define FM_PCD_PLCR_INIT_ENTRY_ERROR          0x40000000
-+#define FM_PCD_PLCR_PRAM_SELF_INIT_COMPLETE   0x80000000
-+#define FM_PCD_PLCR_ATOMIC_ACTION_COMPLETE    0x40000000
-+
-+/***********************************************************************/
-+/*          Memory map                                                 */
-+/***********************************************************************/
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(push,1)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+
-+typedef struct {
-+/* General Configuration and Status Registers */
-+    volatile uint32_t fmpl_gcr;         /* 0x000 FMPL_GCR  - FM Policer General Configuration */
-+    volatile uint32_t fmpl_gsr;         /* 0x004 FMPL_GSR  - FM Policer Global Status Register */
-+    volatile uint32_t fmpl_evr;         /* 0x008 FMPL_EVR  - FM Policer Event Register */
-+    volatile uint32_t fmpl_ier;         /* 0x00C FMPL_IER  - FM Policer Interrupt Enable Register */
-+    volatile uint32_t fmpl_ifr;         /* 0x010 FMPL_IFR  - FM Policer Interrupt Force Register */
-+    volatile uint32_t fmpl_eevr;        /* 0x014 FMPL_EEVR - FM Policer Error Event Register */
-+    volatile uint32_t fmpl_eier;        /* 0x018 FMPL_EIER - FM Policer Error Interrupt Enable Register */
-+    volatile uint32_t fmpl_eifr;        /* 0x01C FMPL_EIFR - FM Policer Error Interrupt Force Register */
-+/* Global Statistic Counters */
-+    volatile uint32_t fmpl_rpcnt;       /* 0x020 FMPL_RPC  - FM Policer RED Packets Counter */
-+    volatile uint32_t fmpl_ypcnt;       /* 0x024 FMPL_YPC  - FM Policer YELLOW Packets Counter */
-+    volatile uint32_t fmpl_rrpcnt;      /* 0x028 FMPL_RRPC - FM Policer Recolored RED Packet Counter */
-+    volatile uint32_t fmpl_rypcnt;      /* 0x02C FMPL_RYPC - FM Policer Recolored YELLOW Packet Counter */
-+    volatile uint32_t fmpl_tpcnt;       /* 0x030 FMPL_TPC  - FM Policer Total Packet Counter */
-+    volatile uint32_t fmpl_flmcnt;      /* 0x034 FMPL_FLMC - FM Policer Frame Length Mismatch Counter */
-+    volatile uint32_t fmpl_res0[21];    /* 0x038 - 0x08B Reserved */
-+/* Profile RAM Access Registers */
-+    volatile uint32_t fmpl_par;         /* 0x08C FMPL_PAR    - FM Policer Profile Action Register*/
-+    t_FmPcdPlcrProfileRegs profileRegs;
-+/* Error Capture Registers */
-+    volatile uint32_t fmpl_serc;        /* 0x100 FMPL_SERC - FM Policer Soft Error Capture */
-+    volatile uint32_t fmpl_upcr;        /* 0x104 FMPL_UPCR - FM Policer Uninitialized Profile Capture Register */
-+    volatile uint32_t fmpl_res2;        /* 0x108 Reserved */
-+/* Debug Registers */
-+    volatile uint32_t fmpl_res3[61];    /* 0x10C-0x200 Reserved Debug*/
-+/* Profile Selection Mapping Registers Per Port-ID (n=1-11, 16) */
-+    volatile uint32_t fmpl_dpmr;        /* 0x200 FMPL_DPMR - FM Policer Default Mapping Register */
-+    volatile uint32_t fmpl_pmr[63];     /*+default 0x204-0x2FF FMPL_PMR1 - FMPL_PMR63, - FM Policer Profile Mapping Registers.
-+                                           (for port-ID 1-11, only for supported Port-ID registers) */
-+} t_FmPcdPlcrRegs;
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+
-+/***********************************************************************/
-+/*  Driver's internal structures                                       */
-+/***********************************************************************/
-+
-+typedef struct {
-+    bool        known;
-+    uint8_t     id;
-+} t_FmPcdKgSchemesExtractsEntry;
-+
-+typedef struct {
-+    t_FmPcdKgSchemesExtractsEntry extractsArray[FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY];
-+} t_FmPcdKgSchemesExtracts;
-+
-+typedef struct {
-+    t_Handle        h_Manip;
-+    bool            keepRes;
-+    e_FmPcdEngine   nextEngine;
-+    uint8_t         parseCode;
-+} t_FmPcdInfoForManip;
-+
-+/**************************************************************************//**
-+ @Description   A structure of parameters to communicate
-+                between the port and PCD regarding the KG scheme.
-+*//***************************************************************************/
-+typedef struct {
-+    uint8_t             netEnvId;    /* in */
-+    uint8_t             numOfDistinctionUnits; /* in */
-+    uint8_t             unitIds[FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS]; /* in */
-+    uint32_t            vector; /* out */
-+} t_NetEnvParams;
-+
-+typedef struct {
-+    bool            allocated;
-+    uint8_t         ownerId; /* guestId for KG in multi-partition only.
-+                                portId for PLCR in any environment */
-+} t_FmPcdAllocMng;
-+
-+typedef struct {
-+    volatile bool       lock;
-+    bool                used;
-+    uint8_t             owners;
-+    uint8_t             netEnvId;
-+    uint8_t             guestId;
-+    uint8_t             baseEntry;
-+    uint16_t            sizeOfGrp;
-+    protocolOpt_t       optArray[FM_PCD_MAX_NUM_OF_OPTIONS(FM_PCD_MAX_NUM_OF_CLS_PLANS)];
-+} t_FmPcdKgClsPlanGrp;
-+
-+typedef struct {
-+    t_Handle            h_FmPcd;
-+    uint8_t             schemeId;
-+    t_FmPcdLock         *p_Lock;
-+    bool                valid;
-+    uint8_t             netEnvId;
-+    uint8_t             owners;
-+    uint32_t            matchVector;
-+    uint32_t            ccUnits;
-+    bool                nextRelativePlcrProfile;
-+    uint16_t            relativeProfileId;
-+    uint16_t            numOfProfiles;
-+    t_FmPcdKgKeyOrder   orderedArray;
-+    e_FmPcdEngine       nextEngine;
-+    e_FmPcdDoneAction   doneAction;
-+    bool                requiredActionFlag;
-+    uint32_t            requiredAction;
-+    bool                extractedOrs;
-+    uint8_t             bitOffsetInPlcrProfile;
-+    bool                directPlcr;
-+#if (DPAA_VERSION >= 11)
-+    bool                vspe;
-+#endif
-+} t_FmPcdKgScheme;
-+
-+typedef union {
-+    struct fman_kg_scheme_regs schemeRegs;
-+    struct fman_kg_pe_regs portRegs;
-+    struct fman_kg_cp_regs clsPlanRegs;
-+} u_FmPcdKgIndirectAccessRegs;
-+
-+typedef struct {
-+    struct fman_kg_regs *p_FmPcdKgRegs;
-+    uint32_t            schemeExceptionsBitMask;
-+    uint8_t             numOfSchemes;
-+    t_Handle            h_HwSpinlock;
-+    uint8_t             schemesIds[FM_PCD_KG_NUM_OF_SCHEMES];
-+    t_FmPcdKgScheme     schemes[FM_PCD_KG_NUM_OF_SCHEMES];
-+    t_FmPcdKgClsPlanGrp clsPlanGrps[FM_MAX_NUM_OF_PORTS];
-+    uint8_t             emptyClsPlanGrpId;
-+    t_FmPcdAllocMng     schemesMng[FM_PCD_KG_NUM_OF_SCHEMES]; /* only for MASTER ! */
-+    t_FmPcdAllocMng     clsPlanBlocksMng[FM_PCD_MAX_NUM_OF_CLS_PLANS/CLS_PLAN_NUM_PER_GRP];
-+    u_FmPcdKgIndirectAccessRegs *p_IndirectAccessRegs;
-+} t_FmPcdKg;
-+
-+typedef struct {
-+    uint16_t            profilesBase;
-+    uint16_t            numOfProfiles;
-+    t_Handle            h_FmPort;
-+} t_FmPcdPlcrMapParam;
-+
-+typedef struct {
-+    uint16_t                            absoluteProfileId;
-+    t_Handle                            h_FmPcd;
-+    bool                                valid;
-+    t_FmPcdLock                         *p_Lock;
-+    t_FmPcdAllocMng                     profilesMng;
-+    bool                                requiredActionFlag;
-+    uint32_t                            requiredAction;
-+    e_FmPcdEngine                       nextEngineOnGreen;          /**< Green next engine type */
-+    u_FmPcdPlcrNextEngineParams         paramsOnGreen;              /**< Green next engine params */
-+
-+    e_FmPcdEngine                       nextEngineOnYellow;         /**< Yellow next engine type */
-+    u_FmPcdPlcrNextEngineParams         paramsOnYellow;             /**< Yellow next engine params */
-+
-+    e_FmPcdEngine                       nextEngineOnRed;            /**< Red next engine type */
-+    u_FmPcdPlcrNextEngineParams         paramsOnRed;                /**< Red next engine params */
-+} t_FmPcdPlcrProfile;
-+
-+typedef struct {
-+    t_FmPcdPlcrRegs                 *p_FmPcdPlcrRegs;
-+    uint16_t                        partPlcrProfilesBase;
-+    uint16_t                        partNumOfPlcrProfiles;
-+    t_FmPcdPlcrProfile              profiles[FM_PCD_PLCR_NUM_ENTRIES];
-+    uint16_t                        numOfSharedProfiles;
-+    uint16_t                        sharedProfilesIds[FM_PCD_PLCR_NUM_ENTRIES];
-+    t_FmPcdPlcrMapParam             portsMapping[FM_MAX_NUM_OF_PORTS];
-+    t_Handle                        h_HwSpinlock;
-+    t_Handle                        h_SwSpinlock;
-+} t_FmPcdPlcr;
-+
-+typedef struct {
-+    uint32_t                        *p_SwPrsCode;
-+    uint32_t                        *p_CurrSwPrs;
-+    uint8_t                         currLabel;
-+    struct fman_prs_regs            *p_FmPcdPrsRegs;
-+    t_FmPcdPrsLabelParams           labelsTable[FM_PCD_PRS_NUM_OF_LABELS];
-+    uint32_t                        fmPcdPrsPortIdStatistics;
-+} t_FmPcdPrs;
-+
-+typedef struct {
-+    struct {
-+        e_NetHeaderType             hdr;
-+        protocolOpt_t               opt; /* only one option !! */
-+    } hdrs[FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS];
-+} t_FmPcdIntDistinctionUnit;
-+
-+typedef struct {
-+    e_NetHeaderType             hdr;
-+    protocolOpt_t               opt; /* only one option !! */
-+    e_NetHeaderType             aliasHdr;
-+} t_FmPcdNetEnvAliases;
-+
-+typedef struct {
-+    uint8_t                     netEnvId;
-+    t_Handle                    h_FmPcd;
-+    t_Handle                    h_Spinlock;
-+    bool                        used;
-+    uint8_t                     owners;
-+    uint8_t                     clsPlanGrpId;
-+    t_FmPcdIntDistinctionUnit   units[FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS];
-+    uint32_t                    unitsVectors[FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS];
-+    uint32_t                    lcvs[FM_PCD_PRS_NUM_OF_HDRS];
-+    uint32_t                    macsecVector;
-+    t_FmPcdNetEnvAliases        aliasHdrs[FM_PCD_MAX_NUM_OF_ALIAS_HDRS];
-+} t_FmPcdNetEnv;
-+
-+typedef struct {
-+    struct fman_prs_cfg          dfltCfg;
-+    bool                        plcrAutoRefresh;
-+    uint16_t                    prsMaxParseCycleLimit;
-+} t_FmPcdDriverParam;
-+
-+typedef struct {
-+    t_Handle                    h_Fm;
-+    t_Handle                    h_FmMuram;
-+    t_FmRevisionInfo            fmRevInfo;
-+
-+    uint64_t                    physicalMuramBase;
-+
-+    t_Handle                    h_Spinlock;
-+    t_List                      freeLocksLst;
-+    t_List                      acquiredLocksLst;
-+
-+    t_Handle                    h_IpcSession; /* relevant for guest only */
-+    bool                        enabled;
-+    uint8_t                     guestId;            /**< Guest Partition Id */
-+    uint8_t                     numOfEnabledGuestPartitionsPcds;
-+    char                        fmPcdModuleName[MODULE_NAME_SIZE];
-+    char                        fmPcdIpcHandlerModuleName[MODULE_NAME_SIZE]; /* relevant for guest only - this is the master's name */
-+    t_FmPcdNetEnv               netEnvs[FM_MAX_NUM_OF_PORTS];
-+    t_FmPcdKg                   *p_FmPcdKg;
-+    t_FmPcdPlcr                 *p_FmPcdPlcr;
-+    t_FmPcdPrs                  *p_FmPcdPrs;
-+
-+    void                        *p_CcShadow;     /**< CC MURAM shadow */
-+    uint32_t                    ccShadowSize;
-+    uint32_t                    ccShadowAlign;
-+    volatile bool               shadowLock;
-+    t_Handle                    h_ShadowSpinlock;
-+
-+    t_Handle                    h_Hc;
-+
-+    uint32_t                    exceptions;
-+    t_FmPcdExceptionCallback    *f_Exception;
-+    t_FmPcdIdExceptionCallback  *f_FmPcdIndexedException;
-+    t_Handle                    h_App;
-+    uintptr_t                   ipv6FrameIdAddr;
-+    uintptr_t                   capwapFrameIdAddr;
-+    bool                        advancedOffloadSupport;
-+
-+    t_FmPcdDriverParam          *p_FmPcdDriverParam;
-+} t_FmPcd;
-+
-+#if (DPAA_VERSION >= 11)
-+typedef uint8_t t_FmPcdFrmReplicUpdateType;
-+#define FRM_REPLIC_UPDATE_COUNTER             0x01
-+#define FRM_REPLIC_UPDATE_INFO                0x02
-+#endif /* (DPAA_VERSION >= 11) */
-+/***********************************************************************/
-+/*  PCD internal routines                                              */
-+/***********************************************************************/
-+
-+t_Error     PcdGetVectorForOpt(t_FmPcd *p_FmPcd, uint8_t netEnvId, protocolOpt_t opt, uint32_t *p_Vector);
-+t_Error     PcdGetUnitsVector(t_FmPcd *p_FmPcd, t_NetEnvParams *p_Params);
-+bool        PcdNetEnvIsUnitWithoutOpts(t_FmPcd *p_FmPcd, uint8_t netEnvId, uint32_t unitVector);
-+t_Error     PcdGetClsPlanGrpParams(t_FmPcd *p_FmPcd, t_FmPcdKgInterModuleClsPlanGrpParams *p_GrpParams);
-+void        FmPcdSetClsPlanGrpId(t_FmPcd *p_FmPcd, uint8_t netEnvId, uint8_t clsPlanGrpId);
-+e_NetHeaderType FmPcdGetAliasHdr(t_FmPcd *p_FmPcd, uint8_t netEnvId, e_NetHeaderType hdr);
-+uint8_t     FmPcdNetEnvGetUnitIdForSingleHdr(t_FmPcd *p_FmPcd, uint8_t netEnvId, e_NetHeaderType hdr);
-+uint8_t     FmPcdNetEnvGetUnitId(t_FmPcd *p_FmPcd, uint8_t netEnvId, e_NetHeaderType hdr, bool interchangeable, protocolOpt_t opt);
-+
-+t_Error     FmPcdManipBuildIpReassmScheme(t_FmPcd *p_FmPcd, t_Handle h_NetEnv, t_Handle h_CcTree, t_Handle h_Manip, bool isIpv4, uint8_t groupId);
-+t_Error     FmPcdManipDeleteIpReassmSchemes(t_Handle h_Manip);
-+t_Error     FmPcdManipBuildCapwapReassmScheme(t_FmPcd *p_FmPcd, t_Handle h_NetEnv, t_Handle h_CcTree, t_Handle h_Manip, uint8_t groupId);
-+t_Error     FmPcdManipDeleteCapwapReassmSchemes(t_Handle h_Manip);
-+bool        FmPcdManipIpReassmIsIpv6Hdr(t_Handle h_Manip);
-+
-+t_Handle    KgConfig( t_FmPcd *p_FmPcd, t_FmPcdParams *p_FmPcdParams);
-+t_Error     KgInit(t_FmPcd *p_FmPcd);
-+t_Error     KgFree(t_FmPcd *p_FmPcd);
-+void        KgSetClsPlan(t_Handle h_FmPcd, t_FmPcdKgInterModuleClsPlanSet *p_Set);
-+bool        KgIsSchemeAlwaysDirect(t_Handle h_FmPcd, uint8_t schemeId);
-+void        KgEnable(t_FmPcd *p_FmPcd);
-+void        KgDisable(t_FmPcd *p_FmPcd);
-+t_Error     KgAllocClsPlanEntries(t_Handle h_FmPcd, uint16_t numOfClsPlanEntries, uint8_t guestId, uint8_t *p_First);
-+void        KgFreeClsPlanEntries(t_Handle h_FmPcd, uint16_t numOfClsPlanEntries, uint8_t guestId, uint8_t base);
-+
-+/* only for MULTI partittion */
-+t_Error     FmPcdKgAllocSchemes(t_Handle h_FmPcd, uint8_t numOfSchemes, uint8_t guestId, uint8_t *p_SchemesIds);
-+t_Error     FmPcdKgFreeSchemes(t_Handle h_FmPcd, uint8_t numOfSchemes, uint8_t guestId, uint8_t *p_SchemesIds);
-+/* only for SINGLE partittion */
-+t_Error     KgBindPortToSchemes(t_Handle h_FmPcd , uint8_t hardwarePortId, uint32_t spReg);
-+
-+t_FmPcdLock *FmPcdAcquireLock(t_Handle h_FmPcd);
-+void        FmPcdReleaseLock(t_Handle h_FmPcd, t_FmPcdLock *p_Lock);
-+
-+t_Handle    PlcrConfig(t_FmPcd *p_FmPcd, t_FmPcdParams *p_FmPcdParams);
-+t_Error     PlcrInit(t_FmPcd *p_FmPcd);
-+t_Error     PlcrFree(t_FmPcd *p_FmPcd);
-+void        PlcrEnable(t_FmPcd *p_FmPcd);
-+void        PlcrDisable(t_FmPcd *p_FmPcd);
-+uint16_t    PlcrAllocProfilesForPartition(t_FmPcd *p_FmPcd, uint16_t base, uint16_t numOfProfiles, uint8_t guestId);
-+void        PlcrFreeProfilesForPartition(t_FmPcd *p_FmPcd, uint16_t base, uint16_t numOfProfiles, uint8_t guestId);
-+t_Error     PlcrSetPortProfiles(t_FmPcd    *p_FmPcd,
-+                                uint8_t    hardwarePortId,
-+                                uint16_t   numOfProfiles,
-+                                uint16_t   base);
-+t_Error     PlcrClearPortProfiles(t_FmPcd *p_FmPcd, uint8_t hardwarePortId);
-+
-+t_Handle    PrsConfig(t_FmPcd *p_FmPcd,t_FmPcdParams *p_FmPcdParams);
-+t_Error     PrsInit(t_FmPcd *p_FmPcd);
-+void        PrsEnable(t_FmPcd *p_FmPcd);
-+void        PrsDisable(t_FmPcd *p_FmPcd);
-+void        PrsFree(t_FmPcd *p_FmPcd );
-+t_Error     PrsIncludePortInStatistics(t_FmPcd *p_FmPcd, uint8_t hardwarePortId, bool include);
-+
-+t_Error     FmPcdCcGetGrpParams(t_Handle treeId, uint8_t grpId, uint32_t *p_GrpBits, uint8_t *p_GrpBase);
-+uint8_t     FmPcdCcGetOffset(t_Handle h_CcNode);
-+uint8_t     FmPcdCcGetParseCode(t_Handle h_CcNode);
-+uint16_t    FmPcdCcGetNumOfKeys(t_Handle h_CcNode);
-+t_Error     ValidateNextEngineParams(t_Handle h_FmPcd, t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams, e_FmPcdCcStatsMode supportedStatsMode);
-+
-+void        FmPcdManipUpdateOwner(t_Handle h_Manip, bool add);
-+t_Error     FmPcdManipCheckParamsForCcNextEngine(t_FmPcdCcNextEngineParams *p_InfoForManip, uint32_t *requiredAction);
-+void        FmPcdManipUpdateAdResultForCc(t_Handle                     h_Manip,
-+                                          t_FmPcdCcNextEngineParams    *p_CcNextEngineParams,
-+                                          t_Handle                     p_Ad,
-+                                          t_Handle                     *p_AdNewPtr);
-+void        FmPcdManipUpdateAdContLookupForCc(t_Handle h_Manip, t_Handle p_Ad, t_Handle *p_AdNew, uint32_t adTableOffset);
-+void        FmPcdManipUpdateOwner(t_Handle h_Manip, bool add);
-+t_Error     FmPcdManipCheckParamsWithCcNodeParams(t_Handle h_Manip, t_Handle h_FmPcdCcNode);
-+#ifdef FM_CAPWAP_SUPPORT
-+t_Handle    FmPcdManipApplSpecificBuild(void);
-+bool        FmPcdManipIsCapwapApplSpecific(t_Handle h_Manip);
-+#endif /* FM_CAPWAP_SUPPORT */
-+#if (DPAA_VERSION >= 11)
-+void *      FrmReplicGroupGetSourceTableDescriptor(t_Handle h_ReplicGroup);
-+void        FrmReplicGroupUpdateOwner(t_Handle h_ReplicGroup, bool add);
-+void        FrmReplicGroupUpdateAd(t_Handle h_ReplicGroup, void *p_Ad, t_Handle *h_AdNew);
-+
-+void        FmPcdCcGetAdTablesThatPointOnReplicGroup(t_Handle   h_Node,
-+                                                     t_Handle   h_ReplicGroup,
-+                                                     t_List     *p_AdTables,
-+                                                     uint32_t   *p_NumOfAdTables);
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+void EnqueueNodeInfoToRelevantLst(t_List *p_List, t_CcNodeInformation *p_CcInfo, t_Handle h_Spinlock);
-+void DequeueNodeInfoFromRelevantLst(t_List *p_List, t_Handle h_Info, t_Handle h_Spinlock);
-+t_CcNodeInformation* FindNodeInfoInReleventLst(t_List *p_List, t_Handle h_Info, t_Handle h_Spinlock);
-+t_List *FmPcdManipGetSpinlock(t_Handle h_Manip);
-+t_List *FmPcdManipGetNodeLstPointedOnThisManip(t_Handle h_Manip);
-+
-+typedef struct
-+{
-+    t_Handle    h_StatsAd;
-+    t_Handle    h_StatsCounters;
-+#if (DPAA_VERSION >= 11)
-+    t_Handle    h_StatsFLRs;
-+#endif /* (DPAA_VERSION >= 11) */
-+} t_FmPcdCcStatsParams;
-+
-+void NextStepAd(t_Handle                     h_Ad,
-+                t_FmPcdCcStatsParams         *p_FmPcdCcStatsParams,
-+                t_FmPcdCcNextEngineParams    *p_FmPcdCcNextEngineParams,
-+                t_FmPcd                      *p_FmPcd);
-+void ReleaseLst(t_List *p_List);
-+
-+static __inline__ t_Handle FmPcdGetMuramHandle(t_Handle h_FmPcd)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    ASSERT_COND(p_FmPcd);
-+    return p_FmPcd->h_FmMuram;
-+}
-+
-+static __inline__ uint64_t FmPcdGetMuramPhysBase(t_Handle h_FmPcd)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    ASSERT_COND(p_FmPcd);
-+    return p_FmPcd->physicalMuramBase;
-+}
-+
-+static __inline__ uint32_t FmPcdLockSpinlock(t_FmPcdLock *p_Lock)
-+{
-+    ASSERT_COND(p_Lock);
-+    return XX_LockIntrSpinlock(p_Lock->h_Spinlock);
-+}
-+
-+static __inline__ void FmPcdUnlockSpinlock(t_FmPcdLock *p_Lock, uint32_t flags)
-+{
-+    ASSERT_COND(p_Lock);
-+    XX_UnlockIntrSpinlock(p_Lock->h_Spinlock, flags);
-+}
-+
-+static __inline__ bool FmPcdLockTryLock(t_FmPcdLock *p_Lock)
-+{
-+    uint32_t intFlags;
-+
-+    ASSERT_COND(p_Lock);
-+    intFlags = XX_LockIntrSpinlock(p_Lock->h_Spinlock);
-+    if (p_Lock->flag)
-+    {
-+        XX_UnlockIntrSpinlock(p_Lock->h_Spinlock, intFlags);
-+        return FALSE;
-+    }
-+    p_Lock->flag = TRUE;
-+    XX_UnlockIntrSpinlock(p_Lock->h_Spinlock, intFlags);
-+    return TRUE;
-+}
-+
-+static __inline__ void FmPcdLockUnlock(t_FmPcdLock *p_Lock)
-+{
-+    ASSERT_COND(p_Lock);
-+    p_Lock->flag = FALSE;
-+}
-+
-+
-+#endif /* __FM_PCD_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_pcd_ipc.h
-@@ -0,0 +1,280 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          fm_pcd_ipc.h
-+
-+ @Description   FM PCD Inter-Partition prototypes, structures and definitions.
-+*//***************************************************************************/
-+#ifndef __FM_PCD_IPC_H
-+#define __FM_PCD_IPC_H
-+
-+#include "std_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_grp Frame Manager API
-+
-+ @Description   FM API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(push,1)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+/**************************************************************************//**
-+ @Description   Structure for getting a sw parser address according to a label
-+                Fields commented 'IN' are passed by the port module to be used
-+                by the FM module.
-+                Fields commented 'OUT' will be filled by FM before returning to port.
-+*//***************************************************************************/
-+typedef _Packed struct t_FmPcdIpcSwPrsLable
-+{
-+    uint32_t    enumHdr;                        /**< IN. The existence of this header will invoke
-+                                                     the sw parser code. */
-+    uint8_t     indexPerHdr;                    /**< IN. Normally 0, if more than one sw parser
-+                                                     attachments for the same header, use this
-+
-+                                                   index to distinguish between them. */
-+} _PackedType t_FmPcdIpcSwPrsLable;
-+
-+/**************************************************************************//**
-+ @Description   Structure for port-PCD communication.
-+                Fields commented 'IN' are passed by the port module to be used
-+                by the FM module.
-+                Fields commented 'OUT' will be filled by FM before returning to port.
-+                Some fields are optional (depending on configuration) and
-+                will be analized by the port and FM modules accordingly.
-+*//***************************************************************************/
-+
-+typedef  struct t_FmPcdIpcKgSchemesParams
-+{
-+    uint8_t     guestId;
-+    uint8_t     numOfSchemes;
-+    uint8_t     schemesIds[FM_PCD_KG_NUM_OF_SCHEMES];
-+} _PackedType t_FmPcdIpcKgSchemesParams;
-+
-+typedef  struct t_FmPcdIpcKgClsPlanParams
-+{
-+    uint8_t     guestId;
-+    uint16_t    numOfClsPlanEntries;
-+    uint8_t     clsPlanBase;
-+} _PackedType t_FmPcdIpcKgClsPlanParams;
-+
-+typedef _Packed struct t_FmPcdIpcPrsIncludePort
-+{
-+    uint8_t     hardwarePortId;
-+    bool        include;
-+} _PackedType t_FmPcdIpcPrsIncludePort;
-+
-+
-+#define FM_PCD_MAX_REPLY_SIZE           16
-+#define FM_PCD_MAX_MSG_SIZE             36
-+#define FM_PCD_MAX_REPLY_BODY_SIZE      36
-+
-+typedef _Packed struct {
-+    uint32_t    msgId;
-+    uint8_t     msgBody[FM_PCD_MAX_MSG_SIZE];
-+} _PackedType t_FmPcdIpcMsg;
-+
-+typedef _Packed struct t_FmPcdIpcReply {
-+    uint32_t    error;
-+    uint8_t     replyBody[FM_PCD_MAX_REPLY_BODY_SIZE];
-+} _PackedType t_FmPcdIpcReply;
-+
-+typedef _Packed struct t_FmIpcResourceAllocParams {
-+    uint8_t     guestId;
-+    uint16_t    base;
-+    uint16_t    num;
-+}_PackedType t_FmIpcResourceAllocParams;
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ALLOC_KG_SCHEMES
-+
-+ @Description   Used by FM PCD front-end in order to allocate KG resources
-+
-+ @Param[in/out] t_FmPcdIpcKgAllocParams Pointer
-+*//***************************************************************************/
-+#define FM_PCD_ALLOC_KG_SCHEMES                 3
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_FREE_KG_SCHEMES
-+
-+ @Description   Used by FM PCD front-end in order to Free KG resources
-+
-+ @Param[in/out] t_FmPcdIpcKgSchemesParams Pointer
-+*//***************************************************************************/
-+#define FM_PCD_FREE_KG_SCHEMES                  4
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ALLOC_PROFILES
-+
-+ @Description   Used by FM PCD front-end in order to allocate Policer profiles
-+
-+ @Param[in/out] t_FmIpcResourceAllocParams Pointer
-+*//***************************************************************************/
-+#define FM_PCD_ALLOC_PROFILES                   5
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_FREE_PROFILES
-+
-+ @Description   Used by FM PCD front-end in order to Free Policer profiles
-+
-+ @Param[in/out] t_FmIpcResourceAllocParams Pointer
-+*//***************************************************************************/
-+#define FM_PCD_FREE_PROFILES                    6
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_SET_PORT_PROFILES
-+
-+ @Description   Used by FM PCD front-end in order to allocate Policer profiles
-+                for specific port
-+
-+ @Param[in/out] t_FmIpcResourceAllocParams Pointer
-+*//***************************************************************************/
-+#define FM_PCD_SET_PORT_PROFILES                7
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_CLEAR_PORT_PROFILES
-+
-+ @Description   Used by FM PCD front-end in order to allocate Policer profiles
-+                for specific port
-+
-+ @Param[in/out] t_FmIpcResourceAllocParams Pointer
-+*//***************************************************************************/
-+#define FM_PCD_CLEAR_PORT_PROFILES              8
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_GET_PHYS_MURAM_BASE
-+
-+ @Description   Used by FM PCD front-end in order to get MURAM base address
-+
-+ @Param[in/out] t_FmPcdIcPhysAddr Pointer
-+*//***************************************************************************/
-+#define FM_PCD_GET_PHYS_MURAM_BASE              9
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_GET_SW_PRS_OFFSET
-+
-+ @Description   Used by FM front-end to get the SW parser offset of the start of
-+                code relevant to a given label.
-+
-+ @Param[in/out] t_FmPcdIpcSwPrsLable Pointer
-+*//***************************************************************************/
-+#define FM_PCD_GET_SW_PRS_OFFSET                10
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MASTER_IS_ENABLED
-+
-+ @Description   Used by FM front-end in order to verify
-+                PCD enablement.
-+
-+ @Param[in]     bool Pointer
-+*//***************************************************************************/
-+#define FM_PCD_MASTER_IS_ENABLED                15
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_GUEST_DISABLE
-+
-+ @Description   Used by FM front-end to inform back-end when
-+                front-end PCD is disabled
-+
-+ @Param[in]     None
-+*//***************************************************************************/
-+#define FM_PCD_GUEST_DISABLE                    16
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_FREE_KG_CLSPLAN
-+
-+ @Description   Used by FM PCD front-end in order to Free KG classification plan entries
-+
-+ @Param[in/out] t_FmPcdIpcKgClsPlanParams Pointer
-+*//***************************************************************************/
-+#define FM_PCD_FREE_KG_CLSPLAN                  22
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ALLOC_KG_CLSPLAN
-+
-+ @Description   Used by FM PCD front-end in order to allocate KG classification plan entries
-+
-+ @Param[in/out] t_FmPcdIpcKgClsPlanParams Pointer
-+*//***************************************************************************/
-+#define FM_PCD_ALLOC_KG_CLSPLAN                 23
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MASTER_IS_ALIVE
-+
-+ @Description   Used by FM front-end to check that back-end exists
-+
-+ @Param[in]     None
-+*//***************************************************************************/
-+#define FM_PCD_MASTER_IS_ALIVE                  24
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_GET_COUNTER
-+
-+ @Description   Used by FM front-end to read PCD counters
-+
-+ @Param[in/out] t_FmPcdIpcGetCounter Pointer
-+*//***************************************************************************/
-+#define FM_PCD_GET_COUNTER                      25
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_PRS_INC_PORT_STATS
-+
-+ @Description   Used by FM front-end to set/clear statistics for port
-+
-+ @Param[in/out] t_FmPcdIpcPrsIncludePort Pointer
-+*//***************************************************************************/
-+#define FM_PCD_PRS_INC_PORT_STATS               26
-+
-+#if (DPAA_VERSION >= 11)
-+/* TODO - doc */
-+#define FM_PCD_ALLOC_SP                         27
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+
-+/** @} */ /* end of FM_PCD_IPC_grp group */
-+/** @} */ /* end of FM_grp group */
-+
-+
-+#endif /* __FM_PCD_IPC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_plcr.c
-@@ -0,0 +1,1847 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_plcr.c
-+
-+ @Description   FM PCD POLICER...
-+*//***************************************************************************/
-+#include <linux/math64.h>
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "string_ext.h"
-+#include "debug_ext.h"
-+#include "net_ext.h"
-+#include "fm_ext.h"
-+
-+#include "fm_common.h"
-+#include "fm_pcd.h"
-+#include "fm_hc.h"
-+#include "fm_pcd_ipc.h"
-+#include "fm_plcr.h"
-+
-+
-+/****************************************/
-+/*       static functions               */
-+/****************************************/
-+
-+static uint32_t PlcrProfileLock(t_Handle h_Profile)
-+{
-+    ASSERT_COND(h_Profile);
-+    return FmPcdLockSpinlock(((t_FmPcdPlcrProfile *)h_Profile)->p_Lock);
-+}
-+
-+static void PlcrProfileUnlock(t_Handle h_Profile, uint32_t intFlags)
-+{
-+    ASSERT_COND(h_Profile);
-+    FmPcdUnlockSpinlock(((t_FmPcdPlcrProfile *)h_Profile)->p_Lock, intFlags);
-+}
-+
-+static bool PlcrProfileFlagTryLock(t_Handle h_Profile)
-+{
-+    ASSERT_COND(h_Profile);
-+    return FmPcdLockTryLock(((t_FmPcdPlcrProfile *)h_Profile)->p_Lock);
-+}
-+
-+static void PlcrProfileFlagUnlock(t_Handle h_Profile)
-+{
-+    ASSERT_COND(h_Profile);
-+    FmPcdLockUnlock(((t_FmPcdPlcrProfile *)h_Profile)->p_Lock);
-+}
-+
-+static uint32_t PlcrHwLock(t_Handle h_FmPcdPlcr)
-+{
-+    ASSERT_COND(h_FmPcdPlcr);
-+    return XX_LockIntrSpinlock(((t_FmPcdPlcr*)h_FmPcdPlcr)->h_HwSpinlock);
-+}
-+
-+static void PlcrHwUnlock(t_Handle h_FmPcdPlcr, uint32_t intFlags)
-+{
-+    ASSERT_COND(h_FmPcdPlcr);
-+    XX_UnlockIntrSpinlock(((t_FmPcdPlcr*)h_FmPcdPlcr)->h_HwSpinlock, intFlags);
-+}
-+
-+static uint32_t PlcrSwLock(t_Handle h_FmPcdPlcr)
-+{
-+    ASSERT_COND(h_FmPcdPlcr);
-+    return XX_LockIntrSpinlock(((t_FmPcdPlcr*)h_FmPcdPlcr)->h_SwSpinlock);
-+}
-+
-+static void PlcrSwUnlock(t_Handle h_FmPcdPlcr, uint32_t intFlags)
-+{
-+    ASSERT_COND(h_FmPcdPlcr);
-+    XX_UnlockIntrSpinlock(((t_FmPcdPlcr*)h_FmPcdPlcr)->h_SwSpinlock, intFlags);
-+}
-+
-+static bool IsProfileShared(t_Handle h_FmPcd, uint16_t absoluteProfileId)
-+{
-+    t_FmPcd         *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint16_t        i;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmPcd, E_INVALID_HANDLE, FALSE);
-+
-+    for (i=0;i<p_FmPcd->p_FmPcdPlcr->numOfSharedProfiles;i++)
-+        if (p_FmPcd->p_FmPcdPlcr->sharedProfilesIds[i] == absoluteProfileId)
-+            return TRUE;
-+    return FALSE;
-+}
-+
-+static t_Error SetProfileNia(t_FmPcd *p_FmPcd, e_FmPcdEngine nextEngine, u_FmPcdPlcrNextEngineParams *p_NextEngineParams, uint32_t *nextAction)
-+{
-+    uint32_t    nia;
-+    uint16_t    absoluteProfileId;
-+    uint8_t     relativeSchemeId, physicalSchemeId;
-+
-+    nia = FM_PCD_PLCR_NIA_VALID;
-+
-+    switch (nextEngine)
-+    {
-+        case e_FM_PCD_DONE :
-+            switch (p_NextEngineParams->action)
-+            {
-+                case e_FM_PCD_DROP_FRAME :
-+                    nia |= GET_NIA_BMI_AC_DISCARD_FRAME(p_FmPcd);
-+                    break;
-+                case e_FM_PCD_ENQ_FRAME:
-+                    nia |= GET_NIA_BMI_AC_ENQ_FRAME(p_FmPcd);
-+                    break;
-+                default:
-+                    RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+            }
-+            break;
-+        case e_FM_PCD_KG:
-+            physicalSchemeId = FmPcdKgGetSchemeId(p_NextEngineParams->h_DirectScheme);
-+            relativeSchemeId = FmPcdKgGetRelativeSchemeId(p_FmPcd, physicalSchemeId);
-+            if (relativeSchemeId >= FM_PCD_KG_NUM_OF_SCHEMES)
-+                RETURN_ERROR(MAJOR, E_NOT_IN_RANGE, NO_MSG);
-+            if (!FmPcdKgIsSchemeValidSw(p_NextEngineParams->h_DirectScheme))
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Invalid direct scheme."));
-+            if (!KgIsSchemeAlwaysDirect(p_FmPcd, relativeSchemeId))
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Policer Profile may point only to a scheme that is always direct."));
-+            nia |= NIA_ENG_KG | NIA_KG_DIRECT | physicalSchemeId;
-+            break;
-+        case e_FM_PCD_PLCR:
-+            absoluteProfileId = ((t_FmPcdPlcrProfile *)p_NextEngineParams->h_Profile)->absoluteProfileId;
-+            if (!IsProfileShared(p_FmPcd, absoluteProfileId))
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Next profile must be a shared profile"));
-+            if (!FmPcdPlcrIsProfileValid(p_FmPcd, absoluteProfileId))
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Invalid profile "));
-+            nia |= NIA_ENG_PLCR | NIA_PLCR_ABSOLUTE | absoluteProfileId;
-+            break;
-+        default:
-+            RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+    }
-+
-+    *nextAction =  nia;
-+
-+    return E_OK;
-+}
-+
-+static uint32_t CalcFPP(uint32_t fpp)
-+{
-+    if (fpp > 15)
-+        return 15 - (0x1f - fpp);
-+    else
-+        return 16 + fpp;
-+}
-+
-+static void GetInfoRateReg(e_FmPcdPlcrRateMode  rateMode,
-+                           uint32_t             rate,
-+                           uint64_t             tsuInTenthNano,
-+                           uint32_t             fppShift,
-+                           uint64_t             *p_Integer,
-+                           uint64_t             *p_Fraction)
-+{
-+    uint64_t tmp, div;
-+
-+    if (rateMode == e_FM_PCD_PLCR_BYTE_MODE)
-+    {
-+        /* now we calculate the initial integer for the bigger rate */
-+        /* from Kbps to Bytes/TSU */
-+        tmp = (uint64_t)rate;
-+        tmp *= 1000; /* kb --> b */
-+        tmp *= tsuInTenthNano; /* bps --> bpTsu(in 10nano) */
-+
-+        div = 1000000000;   /* nano */
-+        div *= 10;          /* 10 nano */
-+        div *= 8;           /* bit to byte */
-+    }
-+    else
-+    {
-+        /* now we calculate the initial integer for the bigger rate */
-+        /* from Kbps to Bytes/TSU */
-+        tmp = (uint64_t)rate;
-+        tmp *= tsuInTenthNano; /* bps --> bpTsu(in 10nano) */
-+
-+        div = 1000000000;   /* nano */
-+        div *= 10;          /* 10 nano */
-+    }
-+    *p_Integer = div64_u64(tmp<<fppShift, div);
-+
-+    /* for calculating the fraction, we will recalculate cir and deduct the integer.
-+     * For precision, we will multiply by 2^16. we do not divid back, since we write
-+     * this value as fraction - see spec.
-+     */
-+    *p_Fraction = div64_u64(((tmp<<fppShift)<<16) - ((*p_Integer<<16)*div), div);
-+}
-+
-+/* .......... */
-+
-+static void CalcRates(uint32_t                              bitFor1Micro,
-+                      t_FmPcdPlcrNonPassthroughAlgParams    *p_NonPassthroughAlgParam,
-+                      uint32_t                              *cir,
-+                      uint32_t                              *cbs,
-+                      uint32_t                              *pir_eir,
-+                      uint32_t                              *pbs_ebs,
-+                      uint32_t                              *fpp)
-+{
-+    uint64_t    integer, fraction;
-+    uint32_t    temp, tsuInTenthNanos;
-+    uint8_t     fppShift=0;
-+
-+    /* we want the tsu to count 10 nano for better precision normally tsu is 3.9 nano, now we will get 39 */
-+    tsuInTenthNanos = (uint32_t)(1000*10/(1 << bitFor1Micro));
-+
-+    /* we choose the faster rate to calibrate fpp */
-+    /* The meaning of this step:
-+     * when fppShift is 0 it means all TS bits are treated as integer and TSU is the TS LSB count.
-+     * In this configuration we calculate the integer and fraction that represent the higher infoRate
-+     * When this is done, we can tell where we have "spare" unused bits and optimize the division of TS
-+     * into "integer" and "fraction" where the logic is - as many bits as possible for integer at
-+     * high rate, as many bits as possible for fraction at low rate.
-+     */
-+    if (p_NonPassthroughAlgParam->committedInfoRate > p_NonPassthroughAlgParam->peakOrExcessInfoRate)
-+        GetInfoRateReg(p_NonPassthroughAlgParam->rateMode, p_NonPassthroughAlgParam->committedInfoRate, tsuInTenthNanos, 0, &integer, &fraction);
-+    else
-+        GetInfoRateReg(p_NonPassthroughAlgParam->rateMode, p_NonPassthroughAlgParam->peakOrExcessInfoRate, tsuInTenthNanos, 0, &integer, &fraction);
-+
-+    /* we shift integer, as in cir/pir it is represented by the MSB 16 bits, and
-+     * the LSB bits are for the fraction */
-+    temp = (uint32_t)((integer<<16) & 0x00000000FFFFFFFF);
-+    /* temp is effected by the rate. For low rates it may be as low as 0, and then we'll
-+     * take max FP = 31.
-+     * For high rates it will never exceed the 32 bit reg (after the 16 shift), as it is
-+     * limited by the 10G physical port.
-+     */
-+    if (temp != 0)
-+    {
-+        /* In this case, the largest rate integer is non 0, if it does not occupy all (high) 16
-+         * bits of the PIR_EIR we can use this fact and enlarge it to occupy all 16 bits.
-+         * The logic is to have as many bits for integer in the higher rates, but if we have "0"s
-+         * in the integer part of the cir/pir register, than these bits are wasted. So we want
-+         * to use these bits for the fraction. in this way we will have for fraction - the number
-+         * of "0" bits and the rest - for integer.
-+         * In other words: For each bit we shift it in PIR_EIR, we move the FP in the TS
-+         * one bit to the left - preserving the relationship and achieving more bits
-+         * for integer in the TS.
-+         */
-+
-+        /* count zeroes left of the higher used bit (in order to shift the value such that
-+         * unused bits may be used for fraction).
-+         */
-+        while ((temp & 0x80000000) == 0)
-+        {
-+            temp = temp << 1;
-+            fppShift++;
-+        }
-+        if (fppShift > 15)
-+        {
-+            REPORT_ERROR(MAJOR, E_INVALID_SELECTION, ("timeStampPeriod to Information rate ratio is too small"));
-+            return;
-+        }
-+    }
-+    else
-+    {
-+        temp = (uint32_t)fraction; /* fraction will alyas be smaller than 2^16 */
-+        if (!temp)
-+            /* integer and fraction are 0, we set FP to its max val */
-+            fppShift = 31;
-+        else
-+        {
-+            /* integer was 0 but fraction is not. FP is 16 for the fraction,
-+             * + all left zeroes of the fraction. */
-+            fppShift=16;
-+            /* count zeroes left of the higher used bit (in order to shift the value such that
-+             * unused bits may be used for fraction).
-+             */
-+            while ((temp & 0x8000) == 0)
-+            {
-+                temp = temp << 1;
-+                fppShift++;
-+            }
-+        }
-+    }
-+
-+    /*
-+     * This means that the FM TS register will now be used so that 'fppShift' bits are for
-+     * fraction and the rest for integer */
-+    /* now we re-calculate cir and pir_eir with the calculated FP */
-+    GetInfoRateReg(p_NonPassthroughAlgParam->rateMode, p_NonPassthroughAlgParam->committedInfoRate, tsuInTenthNanos, fppShift, &integer, &fraction);
-+    *cir = (uint32_t)(integer << 16 | (fraction & 0xFFFF));
-+    GetInfoRateReg(p_NonPassthroughAlgParam->rateMode, p_NonPassthroughAlgParam->peakOrExcessInfoRate, tsuInTenthNanos, fppShift, &integer, &fraction);
-+    *pir_eir = (uint32_t)(integer << 16 | (fraction & 0xFFFF));
-+
-+    *cbs     =  p_NonPassthroughAlgParam->committedBurstSize;
-+    *pbs_ebs =  p_NonPassthroughAlgParam->peakOrExcessBurstSize;
-+
-+    /* convert FP as it should be written to reg.
-+     * 0-15 --> 16-31
-+     * 16-31 --> 0-15
-+     */
-+    *fpp = CalcFPP(fppShift);
-+}
-+
-+static void WritePar(t_FmPcd *p_FmPcd, uint32_t par)
-+{
-+    t_FmPcdPlcrRegs *p_FmPcdPlcrRegs    = p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs;
-+
-+    ASSERT_COND(FmIsMaster(p_FmPcd->h_Fm));
-+    WRITE_UINT32(p_FmPcdPlcrRegs->fmpl_par, par);
-+
-+    while (GET_UINT32(p_FmPcdPlcrRegs->fmpl_par) & FM_PCD_PLCR_PAR_GO) ;
-+}
-+
-+static t_Error BuildProfileRegs(t_FmPcd                     *p_FmPcd,
-+                                t_FmPcdPlcrProfileParams    *p_ProfileParams,
-+                                t_FmPcdPlcrProfileRegs      *p_PlcrRegs)
-+{
-+    t_Error                 err = E_OK;
-+    uint32_t                pemode, gnia, ynia, rnia, bitFor1Micro;
-+
-+    ASSERT_COND(p_FmPcd);
-+
-+    bitFor1Micro = FmGetTimeStampScale(p_FmPcd->h_Fm);
-+    if (bitFor1Micro == 0)
-+    RETURN_ERROR(MAJOR, E_NOT_AVAILABLE, ("Timestamp scale"));
-+
-+/* Set G, Y, R Nia */
-+    err = SetProfileNia(p_FmPcd, p_ProfileParams->nextEngineOnGreen,  &(p_ProfileParams->paramsOnGreen), &gnia);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    err = SetProfileNia(p_FmPcd, p_ProfileParams->nextEngineOnYellow, &(p_ProfileParams->paramsOnYellow), &ynia);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    err = SetProfileNia(p_FmPcd, p_ProfileParams->nextEngineOnRed,    &(p_ProfileParams->paramsOnRed), &rnia);
-+   if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+/* Mode fmpl_pemode */
-+    pemode = FM_PCD_PLCR_PEMODE_PI;
-+
-+    switch (p_ProfileParams->algSelection)
-+    {
-+        case    e_FM_PCD_PLCR_PASS_THROUGH:
-+            p_PlcrRegs->fmpl_pecir         = 0;
-+            p_PlcrRegs->fmpl_pecbs         = 0;
-+            p_PlcrRegs->fmpl_pepepir_eir   = 0;
-+            p_PlcrRegs->fmpl_pepbs_ebs     = 0;
-+            p_PlcrRegs->fmpl_pelts         = 0;
-+            p_PlcrRegs->fmpl_pects         = 0;
-+            p_PlcrRegs->fmpl_pepts_ets     = 0;
-+            pemode &= ~FM_PCD_PLCR_PEMODE_ALG_MASK;
-+            switch (p_ProfileParams->colorMode)
-+            {
-+                case    e_FM_PCD_PLCR_COLOR_BLIND:
-+                    pemode |= FM_PCD_PLCR_PEMODE_CBLND;
-+                    switch (p_ProfileParams->color.dfltColor)
-+                    {
-+                        case e_FM_PCD_PLCR_GREEN:
-+                            pemode &= ~FM_PCD_PLCR_PEMODE_DEFC_MASK;
-+                            break;
-+                        case e_FM_PCD_PLCR_YELLOW:
-+                            pemode |= FM_PCD_PLCR_PEMODE_DEFC_Y;
-+                            break;
-+                        case e_FM_PCD_PLCR_RED:
-+                            pemode |= FM_PCD_PLCR_PEMODE_DEFC_R;
-+                            break;
-+                        case e_FM_PCD_PLCR_OVERRIDE:
-+                            pemode |= FM_PCD_PLCR_PEMODE_DEFC_OVERRIDE;
-+                            break;
-+                        default:
-+                            RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+                    }
-+
-+                    break;
-+                case    e_FM_PCD_PLCR_COLOR_AWARE:
-+                    pemode &= ~FM_PCD_PLCR_PEMODE_CBLND;
-+                    break;
-+                default:
-+                    RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+            }
-+            break;
-+
-+        case    e_FM_PCD_PLCR_RFC_2698:
-+            /* Select algorithm MODE[ALG] = "01" */
-+            pemode |= FM_PCD_PLCR_PEMODE_ALG_RFC2698;
-+            if (p_ProfileParams->nonPassthroughAlgParams.committedInfoRate > p_ProfileParams->nonPassthroughAlgParams.peakOrExcessInfoRate)
-+                RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("in RFC2698 Peak rate must be equal or larger than committedInfoRate."));
-+            goto cont_rfc;
-+        case    e_FM_PCD_PLCR_RFC_4115:
-+            /* Select algorithm MODE[ALG] = "10" */
-+            pemode |= FM_PCD_PLCR_PEMODE_ALG_RFC4115;
-+cont_rfc:
-+            /* Select Color-Blind / Color-Aware operation (MODE[CBLND]) */
-+            switch (p_ProfileParams->colorMode)
-+            {
-+                case    e_FM_PCD_PLCR_COLOR_BLIND:
-+                    pemode |= FM_PCD_PLCR_PEMODE_CBLND;
-+                    break;
-+                case    e_FM_PCD_PLCR_COLOR_AWARE:
-+                    pemode &= ~FM_PCD_PLCR_PEMODE_CBLND;
-+                    /*In color aware more select override color interpretation (MODE[OVCLR]) */
-+                    switch (p_ProfileParams->color.override)
-+                    {
-+                        case e_FM_PCD_PLCR_GREEN:
-+                            pemode &= ~FM_PCD_PLCR_PEMODE_OVCLR_MASK;
-+                            break;
-+                        case e_FM_PCD_PLCR_YELLOW:
-+                            pemode |= FM_PCD_PLCR_PEMODE_OVCLR_Y;
-+                            break;
-+                        case e_FM_PCD_PLCR_RED:
-+                            pemode |= FM_PCD_PLCR_PEMODE_OVCLR_R;
-+                            break;
-+                        case e_FM_PCD_PLCR_OVERRIDE:
-+                            pemode |= FM_PCD_PLCR_PEMODE_OVCLR_G_NC;
-+                            break;
-+                        default:
-+                            RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+                    }
-+                    break;
-+                default:
-+                    RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+            }
-+            /* Select Measurement Unit Mode to BYTE or PACKET (MODE[PKT]) */
-+            switch (p_ProfileParams->nonPassthroughAlgParams.rateMode)
-+            {
-+                case e_FM_PCD_PLCR_BYTE_MODE :
-+                    pemode &= ~FM_PCD_PLCR_PEMODE_PKT;
-+                        switch (p_ProfileParams->nonPassthroughAlgParams.byteModeParams.frameLengthSelection)
-+                        {
-+                            case e_FM_PCD_PLCR_L2_FRM_LEN:
-+                                pemode |= FM_PCD_PLCR_PEMODE_FLS_L2;
-+                                break;
-+                            case e_FM_PCD_PLCR_L3_FRM_LEN:
-+                                pemode |= FM_PCD_PLCR_PEMODE_FLS_L3;
-+                                break;
-+                            case e_FM_PCD_PLCR_L4_FRM_LEN:
-+                                pemode |= FM_PCD_PLCR_PEMODE_FLS_L4;
-+                                break;
-+                            case e_FM_PCD_PLCR_FULL_FRM_LEN:
-+                                pemode |= FM_PCD_PLCR_PEMODE_FLS_FULL;
-+                                break;
-+                            default:
-+                                RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+                        }
-+                        switch (p_ProfileParams->nonPassthroughAlgParams.byteModeParams.rollBackFrameSelection)
-+                        {
-+                            case e_FM_PCD_PLCR_ROLLBACK_L2_FRM_LEN:
-+                                pemode &= ~FM_PCD_PLCR_PEMODE_RBFLS;
-+                                break;
-+                            case e_FM_PCD_PLCR_ROLLBACK_FULL_FRM_LEN:
-+                                pemode |= FM_PCD_PLCR_PEMODE_RBFLS;
-+                                break;
-+                            default:
-+                                RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+                        }
-+                    break;
-+                case e_FM_PCD_PLCR_PACKET_MODE :
-+                    pemode |= FM_PCD_PLCR_PEMODE_PKT;
-+                    break;
-+                default:
-+                    RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+            }
-+            /* Select timeStamp floating point position (MODE[FPP]) to fit the actual traffic rates. For PACKET
-+               mode with low traffic rates move the fixed point to the left to increase fraction accuracy. For BYTE
-+               mode with high traffic rates move the fixed point to the right to increase integer accuracy. */
-+
-+            /* Configure Traffic Parameters*/
-+            {
-+                uint32_t cir=0, cbs=0, pir_eir=0, pbs_ebs=0, fpp=0;
-+
-+                CalcRates(bitFor1Micro, &p_ProfileParams->nonPassthroughAlgParams, &cir, &cbs, &pir_eir, &pbs_ebs, &fpp);
-+
-+                /*  Set Committed Information Rate (CIR) */
-+                p_PlcrRegs->fmpl_pecir = cir;
-+                /*  Set Committed Burst Size (CBS). */
-+                p_PlcrRegs->fmpl_pecbs =  cbs;
-+                /*  Set Peak Information Rate (PIR_EIR used as PIR) */
-+                p_PlcrRegs->fmpl_pepepir_eir = pir_eir;
-+                /*   Set Peak Burst Size (PBS_EBS used as PBS) */
-+                p_PlcrRegs->fmpl_pepbs_ebs = pbs_ebs;
-+
-+                /* Initialize the Metering Buckets to be full (write them with 0xFFFFFFFF. */
-+                /* Peak Rate Token Bucket Size (PTS_ETS used as PTS) */
-+                p_PlcrRegs->fmpl_pepts_ets = 0xFFFFFFFF;
-+                /* Committed Rate Token Bucket Size (CTS) */
-+                p_PlcrRegs->fmpl_pects = 0xFFFFFFFF;
-+
-+                /* Set the FPP based on calculation */
-+                pemode |= (fpp << FM_PCD_PLCR_PEMODE_FPP_SHIFT);
-+            }
-+            break;  /* FM_PCD_PLCR_PEMODE_ALG_RFC2698 , FM_PCD_PLCR_PEMODE_ALG_RFC4115 */
-+        default:
-+            RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+    }
-+
-+    p_PlcrRegs->fmpl_pemode = pemode;
-+
-+    p_PlcrRegs->fmpl_pegnia = gnia;
-+    p_PlcrRegs->fmpl_peynia = ynia;
-+    p_PlcrRegs->fmpl_pernia = rnia;
-+
-+    /* Zero Counters */
-+    p_PlcrRegs->fmpl_pegpc     = 0;
-+    p_PlcrRegs->fmpl_peypc     = 0;
-+    p_PlcrRegs->fmpl_perpc     = 0;
-+    p_PlcrRegs->fmpl_perypc    = 0;
-+    p_PlcrRegs->fmpl_perrpc    = 0;
-+
-+    return E_OK;
-+}
-+
-+static t_Error AllocSharedProfiles(t_FmPcd *p_FmPcd, uint16_t numOfProfiles, uint16_t *profilesIds)
-+{
-+    uint32_t        profilesFound;
-+    uint16_t        i, k=0;
-+    uint32_t        intFlags;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+
-+    if (!numOfProfiles)
-+        return E_OK;
-+
-+    if (numOfProfiles>FM_PCD_PLCR_NUM_ENTRIES)
-+        RETURN_ERROR(MINOR, E_INVALID_VALUE, ("numProfiles is too big."));
-+
-+    intFlags = PlcrSwLock(p_FmPcd->p_FmPcdPlcr);
-+    /* Find numOfProfiles free profiles (may be spread) */
-+    profilesFound = 0;
-+    for (i=0;i<FM_PCD_PLCR_NUM_ENTRIES; i++)
-+        if (!p_FmPcd->p_FmPcdPlcr->profiles[i].profilesMng.allocated)
-+        {
-+            profilesFound++;
-+            profilesIds[k] = i;
-+            k++;
-+            if (profilesFound == numOfProfiles)
-+                break;
-+        }
-+
-+    if (profilesFound != numOfProfiles)
-+    {
-+        PlcrSwUnlock(p_FmPcd->p_FmPcdPlcr, intFlags);
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE,NO_MSG);
-+    }
-+
-+    for (i = 0;i<k;i++)
-+    {
-+        p_FmPcd->p_FmPcdPlcr->profiles[profilesIds[i]].profilesMng.allocated = TRUE;
-+        p_FmPcd->p_FmPcdPlcr->profiles[profilesIds[i]].profilesMng.ownerId = 0;
-+    }
-+    PlcrSwUnlock(p_FmPcd->p_FmPcdPlcr, intFlags);
-+
-+    return E_OK;
-+}
-+
-+static void FreeSharedProfiles(t_FmPcd *p_FmPcd, uint16_t numOfProfiles, uint16_t *profilesIds)
-+{
-+    uint16_t        i;
-+
-+    SANITY_CHECK_RETURN(p_FmPcd, E_INVALID_HANDLE);
-+
-+    ASSERT_COND(numOfProfiles);
-+
-+    for (i=0; i < numOfProfiles; i++)
-+    {
-+        ASSERT_COND(p_FmPcd->p_FmPcdPlcr->profiles[profilesIds[i]].profilesMng.allocated);
-+        p_FmPcd->p_FmPcdPlcr->profiles[profilesIds[i]].profilesMng.allocated = FALSE;
-+        p_FmPcd->p_FmPcdPlcr->profiles[profilesIds[i]].profilesMng.ownerId = p_FmPcd->guestId;
-+    }
-+}
-+
-+static void UpdateRequiredActionFlag(t_Handle h_FmPcd, uint16_t absoluteProfileId, bool set)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    /* this routine is protected by calling routine */
-+
-+    ASSERT_COND(p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId].valid);
-+
-+    if (set)
-+        p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId].requiredActionFlag = TRUE;
-+    else
-+    {
-+        p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId].requiredAction = 0;
-+        p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId].requiredActionFlag = FALSE;
-+    }
-+}
-+
-+/*********************************************/
-+/*............Policer Exception..............*/
-+/*********************************************/
-+static void EventsCB(t_Handle h_FmPcd)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    uint32_t event, mask, force;
-+
-+    ASSERT_COND(FmIsMaster(p_FmPcd->h_Fm));
-+    event = GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_evr);
-+    mask = GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_ier);
-+
-+    event &= mask;
-+
-+    /* clear the forced events */
-+    force = GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_ifr);
-+    if (force & event)
-+        WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_ifr, force & ~event);
-+
-+
-+    WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_evr, event);
-+
-+    if (event & FM_PCD_PLCR_PRAM_SELF_INIT_COMPLETE)
-+        p_FmPcd->f_Exception(p_FmPcd->h_App,e_FM_PCD_PLCR_EXCEPTION_PRAM_SELF_INIT_COMPLETE);
-+    if (event & FM_PCD_PLCR_ATOMIC_ACTION_COMPLETE)
-+        p_FmPcd->f_Exception(p_FmPcd->h_App,e_FM_PCD_PLCR_EXCEPTION_ATOMIC_ACTION_COMPLETE);
-+}
-+
-+/* ..... */
-+
-+static void ErrorExceptionsCB(t_Handle h_FmPcd)
-+{
-+    t_FmPcd             *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    uint32_t            event, force, captureReg, mask;
-+
-+    ASSERT_COND(FmIsMaster(p_FmPcd->h_Fm));
-+    event = GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_eevr);
-+    mask = GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_eier);
-+
-+    event &= mask;
-+
-+    /* clear the forced events */
-+    force = GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_eifr);
-+    if (force & event)
-+        WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_eifr, force & ~event);
-+
-+    WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_eevr, event);
-+
-+    if (event & FM_PCD_PLCR_DOUBLE_ECC)
-+        p_FmPcd->f_Exception(p_FmPcd->h_App,e_FM_PCD_PLCR_EXCEPTION_DOUBLE_ECC);
-+    if (event & FM_PCD_PLCR_INIT_ENTRY_ERROR)
-+    {
-+        captureReg = GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_upcr);
-+        /*ASSERT_COND(captureReg & PLCR_ERR_UNINIT_CAP);
-+        p_UnInitCapt->profileNum = (uint8_t)(captureReg & PLCR_ERR_UNINIT_NUM_MASK);
-+        p_UnInitCapt->portId = (uint8_t)((captureReg & PLCR_ERR_UNINIT_PID_MASK) >>PLCR_ERR_UNINIT_PID_SHIFT) ;
-+        p_UnInitCapt->absolute = (bool)(captureReg & PLCR_ERR_UNINIT_ABSOLUTE_MASK);*/
-+        p_FmPcd->f_FmPcdIndexedException(p_FmPcd->h_App,e_FM_PCD_PLCR_EXCEPTION_INIT_ENTRY_ERROR,(uint16_t)(captureReg & PLCR_ERR_UNINIT_NUM_MASK));
-+        WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_upcr, PLCR_ERR_UNINIT_CAP);
-+    }
-+}
-+
-+
-+/*****************************************************************************/
-+/*              Inter-module API routines                                    */
-+/*****************************************************************************/
-+
-+t_Handle PlcrConfig(t_FmPcd *p_FmPcd, t_FmPcdParams *p_FmPcdParams)
-+{
-+    t_FmPcdPlcr *p_FmPcdPlcr;
-+    uint16_t    i=0;
-+
-+    UNUSED(p_FmPcd);
-+    UNUSED(p_FmPcdParams);
-+
-+    p_FmPcdPlcr = (t_FmPcdPlcr *) XX_Malloc(sizeof(t_FmPcdPlcr));
-+    if (!p_FmPcdPlcr)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM Policer structure allocation FAILED"));
-+        return NULL;
-+    }
-+    memset(p_FmPcdPlcr, 0, sizeof(t_FmPcdPlcr));
-+    if (p_FmPcd->guestId == NCSW_MASTER_ID)
-+    {
-+        p_FmPcdPlcr->p_FmPcdPlcrRegs  = (t_FmPcdPlcrRegs *)UINT_TO_PTR(FmGetPcdPlcrBaseAddr(p_FmPcdParams->h_Fm));
-+        p_FmPcd->p_FmPcdDriverParam->plcrAutoRefresh    = DEFAULT_plcrAutoRefresh;
-+        p_FmPcd->exceptions |= (DEFAULT_fmPcdPlcrExceptions | DEFAULT_fmPcdPlcrErrorExceptions);
-+    }
-+
-+    p_FmPcdPlcr->numOfSharedProfiles    = DEFAULT_numOfSharedPlcrProfiles;
-+
-+    p_FmPcdPlcr->partPlcrProfilesBase   = p_FmPcdParams->partPlcrProfilesBase;
-+    p_FmPcdPlcr->partNumOfPlcrProfiles  = p_FmPcdParams->partNumOfPlcrProfiles;
-+    /* for backward compatabilty. if no policer profile, will set automatically to the max */
-+    if ((p_FmPcd->guestId == NCSW_MASTER_ID) &&
-+        (p_FmPcdPlcr->partNumOfPlcrProfiles == 0))
-+        p_FmPcdPlcr->partNumOfPlcrProfiles = FM_PCD_PLCR_NUM_ENTRIES;
-+
-+    for (i=0; i<FM_PCD_PLCR_NUM_ENTRIES; i++)
-+        p_FmPcdPlcr->profiles[i].profilesMng.ownerId = (uint8_t)ILLEGAL_BASE;
-+
-+    return p_FmPcdPlcr;
-+}
-+
-+t_Error PlcrInit(t_FmPcd *p_FmPcd)
-+{
-+    t_FmPcdDriverParam              *p_Param = p_FmPcd->p_FmPcdDriverParam;
-+    t_FmPcdPlcr                     *p_FmPcdPlcr = p_FmPcd->p_FmPcdPlcr;
-+    t_FmPcdPlcrRegs                 *p_Regs = p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs;
-+    t_Error                         err = E_OK;
-+    uint32_t                        tmpReg32 = 0;
-+    uint16_t                        base;
-+
-+    if ((p_FmPcdPlcr->partPlcrProfilesBase + p_FmPcdPlcr->partNumOfPlcrProfiles) > FM_PCD_PLCR_NUM_ENTRIES)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("partPlcrProfilesBase+partNumOfPlcrProfiles out of range!!!"));
-+
-+    p_FmPcdPlcr->h_HwSpinlock = XX_InitSpinlock();
-+    if (!p_FmPcdPlcr->h_HwSpinlock)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("FM Policer HW spinlock"));
-+
-+    p_FmPcdPlcr->h_SwSpinlock = XX_InitSpinlock();
-+    if (!p_FmPcdPlcr->h_SwSpinlock)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("FM Policer SW spinlock"));
-+
-+    base = PlcrAllocProfilesForPartition(p_FmPcd,
-+                                         p_FmPcdPlcr->partPlcrProfilesBase,
-+                                         p_FmPcdPlcr->partNumOfPlcrProfiles,
-+                                         p_FmPcd->guestId);
-+    if (base == (uint16_t)ILLEGAL_BASE)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, NO_MSG);
-+
-+    if (p_FmPcdPlcr->numOfSharedProfiles)
-+    {
-+        err = AllocSharedProfiles(p_FmPcd,
-+                                  p_FmPcdPlcr->numOfSharedProfiles,
-+                                  p_FmPcdPlcr->sharedProfilesIds);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err,NO_MSG);
-+    }
-+
-+    if (p_FmPcd->guestId != NCSW_MASTER_ID)
-+        return E_OK;
-+
-+    /**********************FMPL_GCR******************/
-+    tmpReg32 = 0;
-+    tmpReg32 |= FM_PCD_PLCR_GCR_STEN;
-+    if (p_Param->plcrAutoRefresh)
-+        tmpReg32 |= FM_PCD_PLCR_GCR_DAR;
-+    tmpReg32 |= GET_NIA_BMI_AC_ENQ_FRAME(p_FmPcd);
-+
-+    WRITE_UINT32(p_Regs->fmpl_gcr, tmpReg32);
-+    /**********************FMPL_GCR******************/
-+
-+    /**********************FMPL_EEVR******************/
-+    WRITE_UINT32(p_Regs->fmpl_eevr, (FM_PCD_PLCR_DOUBLE_ECC | FM_PCD_PLCR_INIT_ENTRY_ERROR));
-+    /**********************FMPL_EEVR******************/
-+    /**********************FMPL_EIER******************/
-+    tmpReg32 = 0;
-+    if (p_FmPcd->exceptions & FM_PCD_EX_PLCR_DOUBLE_ECC)
-+    {
-+        FmEnableRamsEcc(p_FmPcd->h_Fm);
-+        tmpReg32 |= FM_PCD_PLCR_DOUBLE_ECC;
-+    }
-+    if (p_FmPcd->exceptions & FM_PCD_EX_PLCR_INIT_ENTRY_ERROR)
-+        tmpReg32 |= FM_PCD_PLCR_INIT_ENTRY_ERROR;
-+    WRITE_UINT32(p_Regs->fmpl_eier, tmpReg32);
-+    /**********************FMPL_EIER******************/
-+
-+    /**********************FMPL_EVR******************/
-+    WRITE_UINT32(p_Regs->fmpl_evr, (FM_PCD_PLCR_PRAM_SELF_INIT_COMPLETE | FM_PCD_PLCR_ATOMIC_ACTION_COMPLETE));
-+    /**********************FMPL_EVR******************/
-+    /**********************FMPL_IER******************/
-+    tmpReg32 = 0;
-+    if (p_FmPcd->exceptions & FM_PCD_EX_PLCR_PRAM_SELF_INIT_COMPLETE)
-+        tmpReg32 |= FM_PCD_PLCR_PRAM_SELF_INIT_COMPLETE;
-+    if (p_FmPcd->exceptions & FM_PCD_EX_PLCR_ATOMIC_ACTION_COMPLETE)
-+        tmpReg32 |= FM_PCD_PLCR_ATOMIC_ACTION_COMPLETE;
-+    WRITE_UINT32(p_Regs->fmpl_ier, tmpReg32);
-+    /**********************FMPL_IER******************/
-+
-+    /* register even if no interrupts enabled, to allow future enablement */
-+    FmRegisterIntr(p_FmPcd->h_Fm,
-+                   e_FM_MOD_PLCR,
-+                   0,
-+                   e_FM_INTR_TYPE_ERR,
-+                   ErrorExceptionsCB,
-+                   p_FmPcd);
-+    FmRegisterIntr(p_FmPcd->h_Fm,
-+                   e_FM_MOD_PLCR,
-+                   0,
-+                   e_FM_INTR_TYPE_NORMAL,
-+                   EventsCB,
-+                   p_FmPcd);
-+
-+    /* driver initializes one DFLT profile at the last entry*/
-+    /**********************FMPL_DPMR******************/
-+    tmpReg32 = 0;
-+    WRITE_UINT32(p_Regs->fmpl_dpmr, tmpReg32);
-+    p_FmPcd->p_FmPcdPlcr->profiles[0].profilesMng.allocated = TRUE;
-+
-+    return E_OK;
-+}
-+
-+t_Error PlcrFree(t_FmPcd *p_FmPcd)
-+{
-+    FmUnregisterIntr(p_FmPcd->h_Fm, e_FM_MOD_PLCR, 0, e_FM_INTR_TYPE_ERR);
-+    FmUnregisterIntr(p_FmPcd->h_Fm, e_FM_MOD_PLCR, 0, e_FM_INTR_TYPE_NORMAL);
-+
-+    if (p_FmPcd->p_FmPcdPlcr->numOfSharedProfiles)
-+        FreeSharedProfiles(p_FmPcd,
-+                           p_FmPcd->p_FmPcdPlcr->numOfSharedProfiles,
-+                           p_FmPcd->p_FmPcdPlcr->sharedProfilesIds);
-+
-+    if (p_FmPcd->p_FmPcdPlcr->partNumOfPlcrProfiles)
-+        PlcrFreeProfilesForPartition(p_FmPcd,
-+                                     p_FmPcd->p_FmPcdPlcr->partPlcrProfilesBase,
-+                                     p_FmPcd->p_FmPcdPlcr->partNumOfPlcrProfiles,
-+                                     p_FmPcd->guestId);
-+
-+    if (p_FmPcd->p_FmPcdPlcr->h_SwSpinlock)
-+        XX_FreeSpinlock(p_FmPcd->p_FmPcdPlcr->h_SwSpinlock);
-+
-+    if (p_FmPcd->p_FmPcdPlcr->h_HwSpinlock)
-+        XX_FreeSpinlock(p_FmPcd->p_FmPcdPlcr->h_HwSpinlock);
-+
-+    return E_OK;
-+}
-+
-+void PlcrEnable(t_FmPcd *p_FmPcd)
-+{
-+    t_FmPcdPlcrRegs             *p_Regs = p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs;
-+
-+    WRITE_UINT32(p_Regs->fmpl_gcr, GET_UINT32(p_Regs->fmpl_gcr) | FM_PCD_PLCR_GCR_EN);
-+}
-+
-+void PlcrDisable(t_FmPcd *p_FmPcd)
-+{
-+    t_FmPcdPlcrRegs             *p_Regs = p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs;
-+
-+    WRITE_UINT32(p_Regs->fmpl_gcr, GET_UINT32(p_Regs->fmpl_gcr) & ~FM_PCD_PLCR_GCR_EN);
-+}
-+
-+uint16_t PlcrAllocProfilesForPartition(t_FmPcd *p_FmPcd, uint16_t base, uint16_t numOfProfiles, uint8_t guestId)
-+{
-+    uint32_t    intFlags;
-+    uint16_t    profilesFound = 0;
-+    int         i = 0;
-+
-+    ASSERT_COND(p_FmPcd);
-+    ASSERT_COND(p_FmPcd->p_FmPcdPlcr);
-+
-+    if (!numOfProfiles)
-+        return 0;
-+
-+    if ((numOfProfiles > FM_PCD_PLCR_NUM_ENTRIES) ||
-+        (base + numOfProfiles > FM_PCD_PLCR_NUM_ENTRIES))
-+        return (uint16_t)ILLEGAL_BASE;
-+
-+    if (p_FmPcd->h_IpcSession)
-+    {
-+        t_FmIpcResourceAllocParams      ipcAllocParams;
-+        t_FmPcdIpcMsg                   msg;
-+        t_FmPcdIpcReply                 reply;
-+        t_Error                         err;
-+        uint32_t                        replyLength;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        memset(&ipcAllocParams, 0, sizeof(t_FmIpcResourceAllocParams));
-+        ipcAllocParams.guestId         = p_FmPcd->guestId;
-+        ipcAllocParams.num             = p_FmPcd->p_FmPcdPlcr->partNumOfPlcrProfiles;
-+        ipcAllocParams.base            = p_FmPcd->p_FmPcdPlcr->partPlcrProfilesBase;
-+        msg.msgId                      = FM_PCD_ALLOC_PROFILES;
-+        memcpy(msg.msgBody, &ipcAllocParams, sizeof(t_FmIpcResourceAllocParams));
-+        replyLength = sizeof(uint32_t) + sizeof(uint16_t);
-+        err = XX_IpcSendMessage(p_FmPcd->h_IpcSession,
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId) + sizeof(t_FmIpcResourceAllocParams),
-+                                (uint8_t*)&reply,
-+                                &replyLength,
-+                                NULL,
-+                                NULL);
-+        if ((err != E_OK) ||
-+            (replyLength != (sizeof(uint32_t) + sizeof(uint16_t))))
-+        {
-+            REPORT_ERROR(MAJOR, err, NO_MSG);
-+            return (uint16_t)ILLEGAL_BASE;
-+        }
-+        else
-+            memcpy((uint8_t*)&p_FmPcd->p_FmPcdPlcr->partPlcrProfilesBase, reply.replyBody, sizeof(uint16_t));
-+        if (p_FmPcd->p_FmPcdPlcr->partPlcrProfilesBase == (uint16_t)ILLEGAL_BASE)
-+        {
-+            REPORT_ERROR(MAJOR, err, NO_MSG);
-+            return (uint16_t)ILLEGAL_BASE;
-+        }
-+    }
-+    else if (p_FmPcd->guestId != NCSW_MASTER_ID)
-+    {
-+        DBG(WARNING, ("FM Guest mode, without IPC - can't validate Policer-profiles range!"));
-+        return (uint16_t)ILLEGAL_BASE;
-+    }
-+
-+    intFlags = XX_LockIntrSpinlock(p_FmPcd->h_Spinlock);
-+    for (i=base; i<(base+numOfProfiles); i++)
-+        if (p_FmPcd->p_FmPcdPlcr->profiles[i].profilesMng.ownerId == (uint8_t)ILLEGAL_BASE)
-+            profilesFound++;
-+        else
-+            break;
-+
-+    if (profilesFound == numOfProfiles)
-+        for (i=base; i<(base+numOfProfiles); i++)
-+            p_FmPcd->p_FmPcdPlcr->profiles[i].profilesMng.ownerId = guestId;
-+    else
-+    {
-+        XX_UnlockIntrSpinlock(p_FmPcd->h_Spinlock, intFlags);
-+        return (uint16_t)ILLEGAL_BASE;
-+    }
-+    XX_UnlockIntrSpinlock(p_FmPcd->h_Spinlock, intFlags);
-+
-+    return base;
-+}
-+
-+void PlcrFreeProfilesForPartition(t_FmPcd *p_FmPcd, uint16_t base, uint16_t numOfProfiles, uint8_t guestId)
-+{
-+    int     i = 0;
-+
-+    ASSERT_COND(p_FmPcd);
-+    ASSERT_COND(p_FmPcd->p_FmPcdPlcr);
-+
-+    if (p_FmPcd->h_IpcSession)
-+    {
-+        t_FmIpcResourceAllocParams      ipcAllocParams;
-+        t_FmPcdIpcMsg                   msg;
-+        t_Error                         err;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&ipcAllocParams, 0, sizeof(t_FmIpcResourceAllocParams));
-+        ipcAllocParams.guestId         = p_FmPcd->guestId;
-+        ipcAllocParams.num             = p_FmPcd->p_FmPcdPlcr->partNumOfPlcrProfiles;
-+        ipcAllocParams.base            = p_FmPcd->p_FmPcdPlcr->partPlcrProfilesBase;
-+        msg.msgId                      = FM_PCD_FREE_PROFILES;
-+        memcpy(msg.msgBody, &ipcAllocParams, sizeof(t_FmIpcResourceAllocParams));
-+        err = XX_IpcSendMessage(p_FmPcd->h_IpcSession,
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId) + sizeof(t_FmIpcResourceAllocParams),
-+                                NULL,
-+                                NULL,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            REPORT_ERROR(MAJOR, err, NO_MSG);
-+        return;
-+    }
-+    else if (p_FmPcd->guestId != NCSW_MASTER_ID)
-+    {
-+        DBG(WARNING, ("FM Guest mode, without IPC - can't validate Policer-profiles range!"));
-+        return;
-+    }
-+
-+    for (i=base; i<(base+numOfProfiles); i++)
-+    {
-+        if (p_FmPcd->p_FmPcdPlcr->profiles[i].profilesMng.ownerId == guestId)
-+           p_FmPcd->p_FmPcdPlcr->profiles[i].profilesMng.ownerId = (uint8_t)ILLEGAL_BASE;
-+        else
-+            DBG(WARNING, ("Request for freeing storage profile window which wasn't allocated to this partition"));
-+    }
-+}
-+
-+t_Error PlcrSetPortProfiles(t_FmPcd    *p_FmPcd,
-+                            uint8_t    hardwarePortId,
-+                            uint16_t   numOfProfiles,
-+                            uint16_t   base)
-+{
-+    t_FmPcdPlcrRegs *p_Regs = p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs;
-+    uint32_t        log2Num, tmpReg32;
-+
-+    if ((p_FmPcd->guestId != NCSW_MASTER_ID) &&
-+        !p_Regs &&
-+        p_FmPcd->h_IpcSession)
-+    {
-+        t_FmIpcResourceAllocParams      ipcAllocParams;
-+        t_FmPcdIpcMsg                   msg;
-+        t_Error                         err;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&ipcAllocParams, 0, sizeof(t_FmIpcResourceAllocParams));
-+        ipcAllocParams.guestId         = hardwarePortId;
-+        ipcAllocParams.num             = numOfProfiles;
-+        ipcAllocParams.base            = base;
-+        msg.msgId                              = FM_PCD_SET_PORT_PROFILES;
-+        memcpy(msg.msgBody, &ipcAllocParams, sizeof(t_FmIpcResourceAllocParams));
-+        err = XX_IpcSendMessage(p_FmPcd->h_IpcSession,
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId) + sizeof(t_FmIpcResourceAllocParams),
-+                                NULL,
-+                                NULL,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        return E_OK;
-+    }
-+    else if (!p_Regs)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("Either IPC or 'baseAddress' is required!"));
-+
-+    ASSERT_COND(IN_RANGE(1, hardwarePortId, 63));
-+
-+    if (GET_UINT32(p_Regs->fmpl_pmr[hardwarePortId-1]) & FM_PCD_PLCR_PMR_V)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("The requesting port has already an allocated profiles window."));
-+
-+    /**********************FMPL_PMRx******************/
-+    LOG2((uint64_t)numOfProfiles, log2Num);
-+    tmpReg32 = base;
-+    tmpReg32 |= log2Num << 16;
-+    tmpReg32 |= FM_PCD_PLCR_PMR_V;
-+    WRITE_UINT32(p_Regs->fmpl_pmr[hardwarePortId-1], tmpReg32);
-+
-+    return E_OK;
-+}
-+
-+t_Error PlcrClearPortProfiles(t_FmPcd *p_FmPcd, uint8_t hardwarePortId)
-+{
-+    t_FmPcdPlcrRegs *p_Regs = p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs;
-+
-+    if ((p_FmPcd->guestId != NCSW_MASTER_ID) &&
-+        !p_Regs &&
-+        p_FmPcd->h_IpcSession)
-+    {
-+        t_FmIpcResourceAllocParams      ipcAllocParams;
-+        t_FmPcdIpcMsg                   msg;
-+        t_Error                         err;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&ipcAllocParams, 0, sizeof(t_FmIpcResourceAllocParams));
-+        ipcAllocParams.guestId         = hardwarePortId;
-+        msg.msgId                              = FM_PCD_CLEAR_PORT_PROFILES;
-+        memcpy(msg.msgBody, &ipcAllocParams, sizeof(t_FmIpcResourceAllocParams));
-+        err = XX_IpcSendMessage(p_FmPcd->h_IpcSession,
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId) + sizeof(t_FmIpcResourceAllocParams),
-+                                NULL,
-+                                NULL,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        return E_OK;
-+    }
-+    else if (!p_Regs)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("Either IPC or 'baseAddress' is required!"));
-+
-+    ASSERT_COND(IN_RANGE(1, hardwarePortId, 63));
-+    WRITE_UINT32(p_Regs->fmpl_pmr[hardwarePortId-1], 0);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmPcdPlcrAllocProfiles(t_Handle h_FmPcd, uint8_t hardwarePortId, uint16_t numOfProfiles)
-+{
-+    t_FmPcd                     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    t_Error                     err = E_OK;
-+    uint32_t                    profilesFound;
-+    uint32_t                    intFlags;
-+    uint16_t                    i, first, swPortIndex = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+
-+    if (!numOfProfiles)
-+        return E_OK;
-+
-+    ASSERT_COND(hardwarePortId);
-+
-+    if (numOfProfiles>FM_PCD_PLCR_NUM_ENTRIES)
-+        RETURN_ERROR(MINOR, E_INVALID_VALUE, ("numProfiles is too big."));
-+
-+    if (!POWER_OF_2(numOfProfiles))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("numProfiles must be a power of 2."));
-+
-+    first = 0;
-+    profilesFound = 0;
-+    intFlags = PlcrSwLock(p_FmPcd->p_FmPcdPlcr);
-+
-+    for (i=0; i<FM_PCD_PLCR_NUM_ENTRIES; )
-+    {
-+        if (!p_FmPcd->p_FmPcdPlcr->profiles[i].profilesMng.allocated)
-+        {
-+            profilesFound++;
-+            i++;
-+            if (profilesFound == numOfProfiles)
-+                break;
-+        }
-+        else
-+        {
-+            profilesFound = 0;
-+            /* advance i to the next aligned address */
-+            i = first = (uint16_t)(first + numOfProfiles);
-+        }
-+    }
-+
-+    if (profilesFound == numOfProfiles)
-+    {
-+        for (i=first; i<first + numOfProfiles; i++)
-+        {
-+            p_FmPcd->p_FmPcdPlcr->profiles[i].profilesMng.allocated = TRUE;
-+            p_FmPcd->p_FmPcdPlcr->profiles[i].profilesMng.ownerId = hardwarePortId;
-+        }
-+    }
-+    else
-+    {
-+        PlcrSwUnlock(p_FmPcd->p_FmPcdPlcr, intFlags);
-+        RETURN_ERROR(MINOR, E_FULL, ("No profiles."));
-+    }
-+    PlcrSwUnlock(p_FmPcd->p_FmPcdPlcr, intFlags);
-+
-+    err = PlcrSetPortProfiles(p_FmPcd, hardwarePortId, numOfProfiles, first);
-+    if (err)
-+    {
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    HW_PORT_ID_TO_SW_PORT_INDX(swPortIndex, hardwarePortId);
-+
-+    p_FmPcd->p_FmPcdPlcr->portsMapping[swPortIndex].numOfProfiles = numOfProfiles;
-+    p_FmPcd->p_FmPcdPlcr->portsMapping[swPortIndex].profilesBase = first;
-+
-+    return E_OK;
-+}
-+
-+t_Error FmPcdPlcrFreeProfiles(t_Handle h_FmPcd, uint8_t hardwarePortId)
-+{
-+    t_FmPcd                     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    t_Error                     err = E_OK;
-+    uint32_t                    intFlags;
-+    uint16_t                    i, swPortIndex = 0;
-+
-+    ASSERT_COND(IN_RANGE(1, hardwarePortId, 63));
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPcd->p_FmPcdDriverParam, E_INVALID_HANDLE);
-+
-+    HW_PORT_ID_TO_SW_PORT_INDX(swPortIndex, hardwarePortId);
-+
-+    err = PlcrClearPortProfiles(p_FmPcd, hardwarePortId);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err,NO_MSG);
-+
-+    intFlags = PlcrSwLock(p_FmPcd->p_FmPcdPlcr);
-+    for (i=p_FmPcd->p_FmPcdPlcr->portsMapping[swPortIndex].profilesBase;
-+         i<(p_FmPcd->p_FmPcdPlcr->portsMapping[swPortIndex].profilesBase +
-+            p_FmPcd->p_FmPcdPlcr->portsMapping[swPortIndex].numOfProfiles);
-+         i++)
-+    {
-+        ASSERT_COND(p_FmPcd->p_FmPcdPlcr->profiles[i].profilesMng.ownerId == hardwarePortId);
-+        ASSERT_COND(p_FmPcd->p_FmPcdPlcr->profiles[i].profilesMng.allocated);
-+
-+        p_FmPcd->p_FmPcdPlcr->profiles[i].profilesMng.allocated = FALSE;
-+        p_FmPcd->p_FmPcdPlcr->profiles[i].profilesMng.ownerId = p_FmPcd->guestId;
-+    }
-+    PlcrSwUnlock(p_FmPcd->p_FmPcdPlcr, intFlags);
-+
-+    p_FmPcd->p_FmPcdPlcr->portsMapping[swPortIndex].numOfProfiles = 0;
-+    p_FmPcd->p_FmPcdPlcr->portsMapping[swPortIndex].profilesBase = 0;
-+
-+    return E_OK;
-+}
-+
-+t_Error FmPcdPlcrCcGetSetParams(t_Handle h_FmPcd, uint16_t profileIndx ,uint32_t requiredAction)
-+{
-+    t_FmPcd         *p_FmPcd           = (t_FmPcd *)h_FmPcd;
-+    t_FmPcdPlcr     *p_FmPcdPlcr        = p_FmPcd->p_FmPcdPlcr;
-+    t_FmPcdPlcrRegs *p_FmPcdPlcrRegs    = p_FmPcdPlcr->p_FmPcdPlcrRegs;
-+    uint32_t        tmpReg32, intFlags;
-+    t_Error         err;
-+
-+    /* Calling function locked all PCD modules, so no need to lock here */
-+
-+    if (profileIndx >= FM_PCD_PLCR_NUM_ENTRIES)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,("Policer profile out of range"));
-+
-+    if (!FmPcdPlcrIsProfileValid(p_FmPcd, profileIndx))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,("Policer profile is not valid"));
-+
-+    /*intFlags = PlcrProfileLock(&p_FmPcd->p_FmPcdPlcr->profiles[profileIndx]);*/
-+
-+    if (p_FmPcd->h_Hc)
-+    {
-+        err = FmHcPcdPlcrCcGetSetParams(p_FmPcd->h_Hc, profileIndx, requiredAction);
-+
-+        UpdateRequiredActionFlag(p_FmPcd, profileIndx, TRUE);
-+        FmPcdPlcrUpdateRequiredAction(p_FmPcd, profileIndx, requiredAction);
-+
-+        /*PlcrProfileUnlock(&p_FmPcd->p_FmPcdPlcr->profiles[profileIndx], intFlags);*/
-+        return err;
-+    }
-+
-+    /* lock the HW because once we read the registers we don't want them to be changed
-+     * by another access. (We can copy to a tmp location and release the lock!) */
-+
-+    intFlags = PlcrHwLock(p_FmPcdPlcr);
-+    WritePar(p_FmPcd, FmPcdPlcrBuildReadPlcrActionReg(profileIndx));
-+
-+    if (!p_FmPcd->p_FmPcdPlcr->profiles[profileIndx].requiredActionFlag ||
-+       !(p_FmPcd->p_FmPcdPlcr->profiles[profileIndx].requiredAction & requiredAction))
-+    {
-+        if (requiredAction & UPDATE_NIA_ENQ_WITHOUT_DMA)
-+        {
-+            if ((p_FmPcd->p_FmPcdPlcr->profiles[profileIndx].nextEngineOnGreen!= e_FM_PCD_DONE) ||
-+               (p_FmPcd->p_FmPcdPlcr->profiles[profileIndx].nextEngineOnYellow!= e_FM_PCD_DONE) ||
-+               (p_FmPcd->p_FmPcdPlcr->profiles[profileIndx].nextEngineOnRed!= e_FM_PCD_DONE))
-+            {
-+                PlcrHwUnlock(p_FmPcdPlcr, intFlags);
-+                /*PlcrProfileUnlock(&p_FmPcd->p_FmPcdPlcr->profiles[profileIndx], intFlags);*/
-+                RETURN_ERROR (MAJOR, E_OK, ("In this case the next engine can be e_FM_PCD_DONE"));
-+            }
-+
-+            if (p_FmPcd->p_FmPcdPlcr->profiles[profileIndx].paramsOnGreen.action == e_FM_PCD_ENQ_FRAME)
-+            {
-+                tmpReg32 = GET_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pegnia);
-+                if (!(tmpReg32 & (NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME)))
-+                {
-+                    PlcrHwUnlock(p_FmPcdPlcr, intFlags);
-+                    /*PlcrProfileUnlock(&p_FmPcd->p_FmPcdPlcr->profiles[profileIndx], intFlags);*/
-+                    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Next engine of this policer profile has to be assigned to FM_PCD_DONE"));
-+                }
-+                tmpReg32 |= NIA_BMI_AC_ENQ_FRAME_WITHOUT_DMA;
-+                WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pegnia, tmpReg32);
-+                tmpReg32 = FmPcdPlcrBuildWritePlcrActionReg(profileIndx);
-+                tmpReg32 |= FM_PCD_PLCR_PAR_PWSEL_PEGNIA;
-+                WritePar(p_FmPcd, tmpReg32);
-+            }
-+
-+            if (p_FmPcd->p_FmPcdPlcr->profiles[profileIndx].paramsOnYellow.action == e_FM_PCD_ENQ_FRAME)
-+            {
-+                tmpReg32 = GET_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_peynia);
-+                if (!(tmpReg32 & (NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME)))
-+                {
-+                    PlcrHwUnlock(p_FmPcdPlcr, intFlags);
-+                    /*PlcrProfileUnlock(&p_FmPcd->p_FmPcdPlcr->profiles[profileIndx], intFlags);*/
-+                    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Next engine of this policer profile has to be assigned to FM_PCD_DONE"));
-+                }
-+                tmpReg32 |= NIA_BMI_AC_ENQ_FRAME_WITHOUT_DMA;
-+                WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_peynia, tmpReg32);
-+                tmpReg32 = FmPcdPlcrBuildWritePlcrActionReg(profileIndx);
-+                tmpReg32 |= FM_PCD_PLCR_PAR_PWSEL_PEYNIA;
-+                WritePar(p_FmPcd, tmpReg32);
-+                PlcrHwUnlock(p_FmPcdPlcr, intFlags);
-+            }
-+
-+            if (p_FmPcd->p_FmPcdPlcr->profiles[profileIndx].paramsOnRed.action == e_FM_PCD_ENQ_FRAME)
-+            {
-+                tmpReg32 = GET_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pernia);
-+                if (!(tmpReg32 & (NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME)))
-+                {
-+                    PlcrHwUnlock(p_FmPcdPlcr, intFlags);
-+                    /*PlcrProfileUnlock(&p_FmPcd->p_FmPcdPlcr->profiles[profileIndx], intFlags);*/
-+                    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Next engine of this policer profile has to be assigned to FM_PCD_DONE"));
-+                }
-+                tmpReg32 |= NIA_BMI_AC_ENQ_FRAME_WITHOUT_DMA;
-+                WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pernia, tmpReg32);
-+                tmpReg32 = FmPcdPlcrBuildWritePlcrActionReg(profileIndx);
-+                tmpReg32 |= FM_PCD_PLCR_PAR_PWSEL_PERNIA;
-+                WritePar(p_FmPcd, tmpReg32);
-+
-+            }
-+        }
-+    }
-+    PlcrHwUnlock(p_FmPcdPlcr, intFlags);
-+
-+    UpdateRequiredActionFlag(p_FmPcd, profileIndx, TRUE);
-+    FmPcdPlcrUpdateRequiredAction(p_FmPcd, profileIndx, requiredAction);
-+
-+    /*PlcrProfileUnlock(&p_FmPcd->p_FmPcdPlcr->profiles[profileIndx], intFlags);*/
-+
-+    return E_OK;
-+}
-+
-+uint32_t FmPcdPlcrGetRequiredActionFlag(t_Handle h_FmPcd, uint16_t absoluteProfileId)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+   ASSERT_COND(p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId].valid);
-+
-+    return p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId].requiredActionFlag;
-+}
-+
-+uint32_t FmPcdPlcrGetRequiredAction(t_Handle h_FmPcd, uint16_t absoluteProfileId)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+   ASSERT_COND(p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId].valid);
-+
-+    return p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId].requiredAction;
-+}
-+
-+bool FmPcdPlcrIsProfileValid(t_Handle h_FmPcd, uint16_t absoluteProfileId)
-+{
-+    t_FmPcd         *p_FmPcd            = (t_FmPcd*)h_FmPcd;
-+    t_FmPcdPlcr     *p_FmPcdPlcr        = p_FmPcd->p_FmPcdPlcr;
-+
-+    ASSERT_COND(absoluteProfileId < FM_PCD_PLCR_NUM_ENTRIES);
-+
-+    return p_FmPcdPlcr->profiles[absoluteProfileId].valid;
-+}
-+
-+void  FmPcdPlcrValidateProfileSw(t_Handle h_FmPcd, uint16_t absoluteProfileId)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint32_t    intFlags;
-+
-+    ASSERT_COND(!p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId].valid);
-+
-+    intFlags = PlcrProfileLock(&p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId]);
-+    p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId].valid = TRUE;
-+    PlcrProfileUnlock(&p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId], intFlags);
-+}
-+
-+void  FmPcdPlcrInvalidateProfileSw(t_Handle h_FmPcd, uint16_t absoluteProfileId)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint32_t    intFlags;
-+
-+    ASSERT_COND(p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId].valid);
-+
-+    intFlags = PlcrProfileLock(&p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId]);
-+    p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId].valid = FALSE;
-+    PlcrProfileUnlock(&p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId], intFlags);
-+}
-+
-+uint16_t     FmPcdPlcrProfileGetAbsoluteId(t_Handle h_Profile)
-+{
-+        return ((t_FmPcdPlcrProfile*)h_Profile)->absoluteProfileId;
-+}
-+
-+t_Error FmPcdPlcrGetAbsoluteIdByProfileParams(t_Handle                      h_FmPcd,
-+                                              e_FmPcdProfileTypeSelection   profileType,
-+                                              t_Handle                      h_FmPort,
-+                                              uint16_t                      relativeProfile,
-+                                              uint16_t                      *p_AbsoluteId)
-+{
-+    t_FmPcd         *p_FmPcd            = (t_FmPcd*)h_FmPcd;
-+    t_FmPcdPlcr     *p_FmPcdPlcr        = p_FmPcd->p_FmPcdPlcr;
-+    uint8_t         i;
-+
-+    switch (profileType)
-+    {
-+        case e_FM_PCD_PLCR_PORT_PRIVATE:
-+            /* get port PCD id from port handle */
-+            for (i=0;i<FM_MAX_NUM_OF_PORTS;i++)
-+                if (p_FmPcd->p_FmPcdPlcr->portsMapping[i].h_FmPort == h_FmPort)
-+                    break;
-+            if (i ==  FM_MAX_NUM_OF_PORTS)
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE , ("Invalid port handle."));
-+
-+            if (!p_FmPcd->p_FmPcdPlcr->portsMapping[i].numOfProfiles)
-+                RETURN_ERROR(MAJOR, E_INVALID_SELECTION , ("Port has no allocated profiles"));
-+            if (relativeProfile >= p_FmPcd->p_FmPcdPlcr->portsMapping[i].numOfProfiles)
-+                RETURN_ERROR(MAJOR, E_INVALID_SELECTION , ("Profile id is out of range"));
-+            *p_AbsoluteId = (uint16_t)(p_FmPcd->p_FmPcdPlcr->portsMapping[i].profilesBase + relativeProfile);
-+            break;
-+        case e_FM_PCD_PLCR_SHARED:
-+            if (relativeProfile >= p_FmPcdPlcr->numOfSharedProfiles)
-+                RETURN_ERROR(MAJOR, E_INVALID_SELECTION , ("Profile id is out of range"));
-+            *p_AbsoluteId = (uint16_t)(p_FmPcdPlcr->sharedProfilesIds[relativeProfile]);
-+            break;
-+        default:
-+            RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("Invalid policer profile type"));
-+    }
-+
-+    return E_OK;
-+}
-+
-+uint16_t FmPcdPlcrGetPortProfilesBase(t_Handle h_FmPcd, uint8_t hardwarePortId)
-+{
-+    t_FmPcd         *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    uint16_t        swPortIndex = 0;
-+
-+    HW_PORT_ID_TO_SW_PORT_INDX(swPortIndex, hardwarePortId);
-+
-+    return p_FmPcd->p_FmPcdPlcr->portsMapping[swPortIndex].profilesBase;
-+}
-+
-+uint16_t FmPcdPlcrGetPortNumOfProfiles(t_Handle h_FmPcd, uint8_t hardwarePortId)
-+{
-+    t_FmPcd         *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    uint16_t        swPortIndex = 0;
-+
-+    HW_PORT_ID_TO_SW_PORT_INDX(swPortIndex, hardwarePortId);
-+
-+    return p_FmPcd->p_FmPcdPlcr->portsMapping[swPortIndex].numOfProfiles;
-+
-+}
-+uint32_t FmPcdPlcrBuildWritePlcrActionReg(uint16_t absoluteProfileId)
-+{
-+    return (uint32_t)(FM_PCD_PLCR_PAR_GO |
-+                      ((uint32_t)absoluteProfileId << FM_PCD_PLCR_PAR_PNUM_SHIFT));
-+}
-+
-+uint32_t FmPcdPlcrBuildWritePlcrActionRegs(uint16_t absoluteProfileId)
-+{
-+    return (uint32_t)(FM_PCD_PLCR_PAR_GO |
-+                      ((uint32_t)absoluteProfileId << FM_PCD_PLCR_PAR_PNUM_SHIFT) |
-+                      FM_PCD_PLCR_PAR_PWSEL_MASK);
-+}
-+
-+bool    FmPcdPlcrHwProfileIsValid(uint32_t profileModeReg)
-+{
-+
-+    if (profileModeReg & FM_PCD_PLCR_PEMODE_PI)
-+        return TRUE;
-+    else
-+        return FALSE;
-+}
-+
-+uint32_t FmPcdPlcrBuildReadPlcrActionReg(uint16_t absoluteProfileId)
-+{
-+    return (uint32_t)(FM_PCD_PLCR_PAR_GO |
-+                      FM_PCD_PLCR_PAR_R |
-+                      ((uint32_t)absoluteProfileId << FM_PCD_PLCR_PAR_PNUM_SHIFT) |
-+                      FM_PCD_PLCR_PAR_PWSEL_MASK);
-+}
-+
-+uint32_t FmPcdPlcrBuildCounterProfileReg(e_FmPcdPlcrProfileCounters counter)
-+{
-+    switch (counter)
-+    {
-+        case (e_FM_PCD_PLCR_PROFILE_GREEN_PACKET_TOTAL_COUNTER):
-+            return FM_PCD_PLCR_PAR_PWSEL_PEGPC;
-+        case (e_FM_PCD_PLCR_PROFILE_YELLOW_PACKET_TOTAL_COUNTER):
-+            return FM_PCD_PLCR_PAR_PWSEL_PEYPC;
-+        case (e_FM_PCD_PLCR_PROFILE_RED_PACKET_TOTAL_COUNTER) :
-+            return FM_PCD_PLCR_PAR_PWSEL_PERPC;
-+        case (e_FM_PCD_PLCR_PROFILE_RECOLOURED_YELLOW_PACKET_TOTAL_COUNTER) :
-+            return FM_PCD_PLCR_PAR_PWSEL_PERYPC;
-+        case (e_FM_PCD_PLCR_PROFILE_RECOLOURED_RED_PACKET_TOTAL_COUNTER) :
-+            return FM_PCD_PLCR_PAR_PWSEL_PERRPC;
-+       default:
-+            REPORT_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+            return 0;
-+    }
-+}
-+
-+uint32_t FmPcdPlcrBuildNiaProfileReg(bool green, bool yellow, bool red)
-+{
-+
-+    uint32_t tmpReg32 = 0;
-+
-+    if (green)
-+        tmpReg32 |= FM_PCD_PLCR_PAR_PWSEL_PEGNIA;
-+    if (yellow)
-+        tmpReg32 |= FM_PCD_PLCR_PAR_PWSEL_PEYNIA;
-+    if (red)
-+        tmpReg32 |= FM_PCD_PLCR_PAR_PWSEL_PERNIA;
-+
-+    return tmpReg32;
-+}
-+
-+void FmPcdPlcrUpdateRequiredAction(t_Handle h_FmPcd, uint16_t absoluteProfileId, uint32_t requiredAction)
-+{
-+    t_FmPcd     *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    /* this routine is protected by calling routine */
-+
-+    ASSERT_COND(p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId].valid);
-+
-+    p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId].requiredAction |= requiredAction;
-+}
-+
-+/*********************** End of inter-module routines ************************/
-+
-+
-+/**************************************************/
-+/*............Policer API.........................*/
-+/**************************************************/
-+
-+t_Error FM_PCD_ConfigPlcrAutoRefreshMode(t_Handle h_FmPcd, bool enable)
-+{
-+   t_FmPcd *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdPlcr, E_INVALID_HANDLE);
-+
-+    if (!FmIsMaster(p_FmPcd->h_Fm))
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("FM_PCD_ConfigPlcrAutoRefreshMode - guest mode!"));
-+
-+    p_FmPcd->p_FmPcdDriverParam->plcrAutoRefresh = enable;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_ConfigPlcrNumOfSharedProfiles(t_Handle h_FmPcd, uint16_t numOfSharedPlcrProfiles)
-+{
-+   t_FmPcd *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdPlcr, E_INVALID_HANDLE);
-+
-+    p_FmPcd->p_FmPcdPlcr->numOfSharedProfiles = numOfSharedPlcrProfiles;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_SetPlcrStatistics(t_Handle h_FmPcd, bool enable)
-+{
-+   t_FmPcd  *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+   uint32_t tmpReg32;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPcd->p_FmPcdDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdPlcr, E_INVALID_HANDLE);
-+
-+    if (!FmIsMaster(p_FmPcd->h_Fm))
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("FM_PCD_SetPlcrStatistics - guest mode!"));
-+
-+    tmpReg32 =  GET_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_gcr);
-+    if (enable)
-+        tmpReg32 |= FM_PCD_PLCR_GCR_STEN;
-+    else
-+        tmpReg32 &= ~FM_PCD_PLCR_GCR_STEN;
-+
-+    WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_gcr, tmpReg32);
-+    return E_OK;
-+}
-+
-+t_Handle FM_PCD_PlcrProfileSet(t_Handle     h_FmPcd,
-+                               t_FmPcdPlcrProfileParams *p_ProfileParams)
-+{
-+    t_FmPcd                             *p_FmPcd;
-+    t_FmPcdPlcrRegs                     *p_FmPcdPlcrRegs;
-+    t_FmPcdPlcrProfileRegs              plcrProfileReg;
-+    uint32_t                            intFlags;
-+    uint16_t                            absoluteProfileId;
-+    t_Error                             err = E_OK;
-+    uint32_t                            tmpReg32;
-+    t_FmPcdPlcrProfile                  *p_Profile;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmPcd, E_INVALID_HANDLE, NULL);
-+
-+    if (p_ProfileParams->modify)
-+    {
-+        p_Profile = (t_FmPcdPlcrProfile *)p_ProfileParams->id.h_Profile;
-+        p_FmPcd = p_Profile->h_FmPcd;
-+        absoluteProfileId = p_Profile->absoluteProfileId;
-+        if (absoluteProfileId >= FM_PCD_PLCR_NUM_ENTRIES)
-+        {
-+            REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("profileId too Big "));
-+            return NULL;
-+        }
-+
-+        SANITY_CHECK_RETURN_VALUE(p_FmPcd->p_FmPcdPlcr, E_INVALID_HANDLE, NULL);
-+
-+        /* Try lock profile using flag */
-+         if (!PlcrProfileFlagTryLock(p_Profile))
-+         {
-+             DBG(TRACE, ("Profile Try Lock - BUSY"));
-+             /* Signal to caller BUSY condition */
-+             p_ProfileParams->id.h_Profile = NULL;
-+             return NULL;
-+         }
-+   }
-+    else
-+    {
-+        p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+        SANITY_CHECK_RETURN_VALUE(p_FmPcd->p_FmPcdPlcr, E_INVALID_HANDLE, NULL);
-+
-+        /* SMP: needs to be protected only if another core now changes the windows */
-+        err = FmPcdPlcrGetAbsoluteIdByProfileParams(h_FmPcd,
-+                                                    p_ProfileParams->id.newParams.profileType,
-+                                                    p_ProfileParams->id.newParams.h_FmPort,
-+                                                    p_ProfileParams->id.newParams.relativeProfileId,
-+                                                    &absoluteProfileId);
-+        if (err)
-+        {
-+             REPORT_ERROR(MAJOR, err, NO_MSG);
-+             return NULL;
-+        }
-+
-+         if (absoluteProfileId >= FM_PCD_PLCR_NUM_ENTRIES)
-+         {
-+             REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("profileId too Big "));
-+             return NULL;
-+         }
-+
-+         if (FmPcdPlcrIsProfileValid(p_FmPcd, absoluteProfileId))
-+         {
-+             REPORT_ERROR(MAJOR, E_ALREADY_EXISTS, ("Policer Profile is already used"));
-+             return NULL;
-+         }
-+
-+         /* initialize profile struct */
-+         p_Profile = &p_FmPcd->p_FmPcdPlcr->profiles[absoluteProfileId];
-+
-+         p_Profile->h_FmPcd = p_FmPcd;
-+         p_Profile->absoluteProfileId = absoluteProfileId;
-+
-+         p_Profile->p_Lock = FmPcdAcquireLock(p_FmPcd);
-+         if (!p_Profile->p_Lock)
-+             REPORT_ERROR(MAJOR, E_NOT_AVAILABLE, ("FM Policer Profile lock obj!"));
-+    }
-+
-+    SANITY_CHECK_RETURN_VALUE(!p_FmPcd->p_FmPcdDriverParam, E_INVALID_STATE, NULL);
-+
-+    p_Profile->nextEngineOnGreen = p_ProfileParams->nextEngineOnGreen;
-+    memcpy(&p_Profile->paramsOnGreen, &(p_ProfileParams->paramsOnGreen), sizeof(u_FmPcdPlcrNextEngineParams));
-+
-+    p_Profile->nextEngineOnYellow = p_ProfileParams->nextEngineOnYellow;
-+    memcpy(&p_Profile->paramsOnYellow, &(p_ProfileParams->paramsOnYellow), sizeof(u_FmPcdPlcrNextEngineParams));
-+
-+    p_Profile->nextEngineOnRed = p_ProfileParams->nextEngineOnRed;
-+    memcpy(&p_Profile->paramsOnRed, &(p_ProfileParams->paramsOnRed), sizeof(u_FmPcdPlcrNextEngineParams));
-+
-+    memset(&plcrProfileReg, 0, sizeof(t_FmPcdPlcrProfileRegs));
-+
-+    /* build the policer profile registers */
-+    err =  BuildProfileRegs(h_FmPcd, p_ProfileParams, &plcrProfileReg);
-+    if (err)
-+    {
-+        REPORT_ERROR(MAJOR, err, NO_MSG);
-+        if (p_ProfileParams->modify)
-+            /* unlock */
-+            PlcrProfileFlagUnlock(p_Profile);
-+        if (!p_ProfileParams->modify &&
-+                p_Profile->p_Lock)
-+            /* release allocated Profile lock */
-+            FmPcdReleaseLock(p_FmPcd, p_Profile->p_Lock);
-+        return NULL;
-+    }
-+
-+    if (p_FmPcd->h_Hc)
-+    {
-+         err = FmHcPcdPlcrSetProfile(p_FmPcd->h_Hc, (t_Handle)p_Profile, &plcrProfileReg);
-+         if (p_ProfileParams->modify)
-+             PlcrProfileFlagUnlock(p_Profile);
-+         if (err)
-+         {
-+             /* release the allocated scheme lock */
-+             if (!p_ProfileParams->modify &&
-+                     p_Profile->p_Lock)
-+                 FmPcdReleaseLock(p_FmPcd, p_Profile->p_Lock);
-+
-+             return NULL;
-+         }
-+         if (!p_ProfileParams->modify)
-+             FmPcdPlcrValidateProfileSw(p_FmPcd,absoluteProfileId);
-+         return (t_Handle)p_Profile;
-+    }
-+
-+    p_FmPcdPlcrRegs = p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs;
-+    SANITY_CHECK_RETURN_VALUE(p_FmPcdPlcrRegs, E_INVALID_HANDLE, NULL);
-+
-+    intFlags = PlcrHwLock(p_FmPcd->p_FmPcdPlcr);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pemode , plcrProfileReg.fmpl_pemode);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pegnia , plcrProfileReg.fmpl_pegnia);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_peynia , plcrProfileReg.fmpl_peynia);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pernia , plcrProfileReg.fmpl_pernia);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pecir  , plcrProfileReg.fmpl_pecir);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pecbs  , plcrProfileReg.fmpl_pecbs);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pepepir_eir,plcrProfileReg.fmpl_pepepir_eir);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pepbs_ebs,plcrProfileReg.fmpl_pepbs_ebs);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pelts  , plcrProfileReg.fmpl_pelts);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pects  , plcrProfileReg.fmpl_pects);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pepts_ets,plcrProfileReg.fmpl_pepts_ets);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pegpc  , plcrProfileReg.fmpl_pegpc);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_peypc  , plcrProfileReg.fmpl_peypc);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_perpc  , plcrProfileReg.fmpl_perpc);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_perypc , plcrProfileReg.fmpl_perypc);
-+    WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_perrpc , plcrProfileReg.fmpl_perrpc);
-+
-+    tmpReg32 = FmPcdPlcrBuildWritePlcrActionRegs(absoluteProfileId);
-+    WritePar(p_FmPcd, tmpReg32);
-+
-+    PlcrHwUnlock(p_FmPcd->p_FmPcdPlcr, intFlags);
-+
-+    if (!p_ProfileParams->modify)
-+        FmPcdPlcrValidateProfileSw(p_FmPcd,absoluteProfileId);
-+    else
-+        PlcrProfileFlagUnlock(p_Profile);
-+
-+    return (t_Handle)p_Profile;
-+}
-+
-+t_Error FM_PCD_PlcrProfileDelete(t_Handle h_Profile)
-+{
-+    t_FmPcdPlcrProfile  *p_Profile = (t_FmPcdPlcrProfile*)h_Profile;
-+    t_FmPcd             *p_FmPcd;
-+    uint16_t            profileIndx;
-+    uint32_t            tmpReg32, intFlags;
-+    t_Error             err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Profile, E_INVALID_HANDLE);
-+    p_FmPcd = p_Profile->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+
-+    profileIndx = p_Profile->absoluteProfileId;
-+
-+    UpdateRequiredActionFlag(p_FmPcd, profileIndx, FALSE);
-+
-+    FmPcdPlcrInvalidateProfileSw(p_FmPcd,profileIndx);
-+
-+    if (p_FmPcd->h_Hc)
-+    {
-+        err = FmHcPcdPlcrDeleteProfile(p_FmPcd->h_Hc, h_Profile);
-+        if (p_Profile->p_Lock)
-+            /* release allocated Profile lock */
-+            FmPcdReleaseLock(p_FmPcd, p_Profile->p_Lock);
-+
-+        return err;
-+    }
-+
-+    intFlags = PlcrHwLock(p_FmPcd->p_FmPcdPlcr);
-+    WRITE_UINT32(p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->profileRegs.fmpl_pemode, ~FM_PCD_PLCR_PEMODE_PI);
-+
-+    tmpReg32 = FmPcdPlcrBuildWritePlcrActionRegs(profileIndx);
-+    WritePar(p_FmPcd, tmpReg32);
-+    PlcrHwUnlock(p_FmPcd->p_FmPcdPlcr, intFlags);
-+
-+
-+    if (p_Profile->p_Lock)
-+        /* release allocated Profile lock */
-+        FmPcdReleaseLock(p_FmPcd, p_Profile->p_Lock);
-+
-+    /* we do not memset profile as all its fields are being re-initialized at "set",
-+     * plus its allocation information is still valid. */
-+    return E_OK;
-+}
-+
-+/***************************************************/
-+/*............Policer Profile Counter..............*/
-+/***************************************************/
-+uint32_t FM_PCD_PlcrProfileGetCounter(t_Handle h_Profile, e_FmPcdPlcrProfileCounters counter)
-+{
-+    t_FmPcdPlcrProfile  *p_Profile = (t_FmPcdPlcrProfile*)h_Profile;
-+    t_FmPcd             *p_FmPcd;
-+    uint16_t            profileIndx;
-+    uint32_t            intFlags, counterVal = 0;
-+    t_FmPcdPlcrRegs     *p_FmPcdPlcrRegs;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Profile, E_INVALID_HANDLE);
-+    p_FmPcd = p_Profile->h_FmPcd;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+
-+    if (p_FmPcd->h_Hc)
-+        return FmHcPcdPlcrGetProfileCounter(p_FmPcd->h_Hc, h_Profile, counter);
-+
-+    p_FmPcdPlcrRegs = p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs;
-+    SANITY_CHECK_RETURN_VALUE(p_FmPcdPlcrRegs, E_INVALID_HANDLE, 0);
-+
-+    profileIndx = p_Profile->absoluteProfileId;
-+
-+    if (profileIndx >= FM_PCD_PLCR_NUM_ENTRIES)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("profileId too Big "));
-+        return 0;
-+    }
-+    intFlags = PlcrHwLock(p_FmPcd->p_FmPcdPlcr);
-+    WritePar(p_FmPcd, FmPcdPlcrBuildReadPlcrActionReg(profileIndx));
-+
-+    switch (counter)
-+    {
-+        case e_FM_PCD_PLCR_PROFILE_GREEN_PACKET_TOTAL_COUNTER:
-+            counterVal = (GET_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pegpc));
-+            break;
-+        case e_FM_PCD_PLCR_PROFILE_YELLOW_PACKET_TOTAL_COUNTER:
-+            counterVal = GET_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_peypc);
-+            break;
-+        case e_FM_PCD_PLCR_PROFILE_RED_PACKET_TOTAL_COUNTER:
-+            counterVal = GET_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_perpc);
-+            break;
-+        case e_FM_PCD_PLCR_PROFILE_RECOLOURED_YELLOW_PACKET_TOTAL_COUNTER:
-+            counterVal = GET_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_perypc);
-+            break;
-+        case e_FM_PCD_PLCR_PROFILE_RECOLOURED_RED_PACKET_TOTAL_COUNTER:
-+            counterVal = GET_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_perrpc);
-+            break;
-+        default:
-+            REPORT_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+            break;
-+    }
-+    PlcrHwUnlock(p_FmPcd->p_FmPcdPlcr, intFlags);
-+
-+    return counterVal;
-+}
-+
-+t_Error FM_PCD_PlcrProfileSetCounter(t_Handle h_Profile, e_FmPcdPlcrProfileCounters counter, uint32_t value)
-+{
-+    t_FmPcdPlcrProfile  *p_Profile = (t_FmPcdPlcrProfile*)h_Profile;
-+    t_FmPcd             *p_FmPcd;
-+    uint16_t            profileIndx;
-+    uint32_t            tmpReg32, intFlags;
-+    t_FmPcdPlcrRegs     *p_FmPcdPlcrRegs;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Profile, E_INVALID_HANDLE);
-+
-+    p_FmPcd = p_Profile->h_FmPcd;
-+    profileIndx = p_Profile->absoluteProfileId;
-+
-+    if (p_FmPcd->h_Hc)
-+        return FmHcPcdPlcrSetProfileCounter(p_FmPcd->h_Hc, h_Profile, counter, value);
-+
-+    p_FmPcdPlcrRegs = p_FmPcd->p_FmPcdPlcr->p_FmPcdPlcrRegs;
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcdPlcrRegs, E_INVALID_HANDLE);
-+
-+    intFlags = PlcrHwLock(p_FmPcd->p_FmPcdPlcr);
-+    switch (counter)
-+    {
-+        case e_FM_PCD_PLCR_PROFILE_GREEN_PACKET_TOTAL_COUNTER:
-+             WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_pegpc, value);
-+             break;
-+        case e_FM_PCD_PLCR_PROFILE_YELLOW_PACKET_TOTAL_COUNTER:
-+             WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_peypc, value);
-+             break;
-+        case e_FM_PCD_PLCR_PROFILE_RED_PACKET_TOTAL_COUNTER:
-+             WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_perpc, value);
-+             break;
-+        case e_FM_PCD_PLCR_PROFILE_RECOLOURED_YELLOW_PACKET_TOTAL_COUNTER:
-+             WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_perypc ,value);
-+             break;
-+        case e_FM_PCD_PLCR_PROFILE_RECOLOURED_RED_PACKET_TOTAL_COUNTER:
-+             WRITE_UINT32(p_FmPcdPlcrRegs->profileRegs.fmpl_perrpc ,value);
-+             break;
-+        default:
-+            PlcrHwUnlock(p_FmPcd->p_FmPcdPlcr, intFlags);
-+            RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+    }
-+
-+    /*  Activate the atomic write action by writing FMPL_PAR with: GO=1, RW=1, PSI=0, PNUM =
-+     *  Profile Number, PWSEL=0xFFFF (select all words).
-+     */
-+    tmpReg32 = FmPcdPlcrBuildWritePlcrActionReg(profileIndx);
-+    tmpReg32 |= FmPcdPlcrBuildCounterProfileReg(counter);
-+    WritePar(p_FmPcd, tmpReg32);
-+    PlcrHwUnlock(p_FmPcd->p_FmPcdPlcr, intFlags);
-+
-+    return E_OK;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_plcr.h
-@@ -0,0 +1,165 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_plcr.h
-+
-+ @Description   FM Policer private header
-+*//***************************************************************************/
-+#ifndef __FM_PLCR_H
-+#define __FM_PLCR_H
-+
-+#include "std_ext.h"
-+
-+
-+/***********************************************************************/
-+/*          Policer defines                                            */
-+/***********************************************************************/
-+
-+#define FM_PCD_PLCR_PAR_GO                    0x80000000
-+#define FM_PCD_PLCR_PAR_PWSEL_MASK            0x0000FFFF
-+#define FM_PCD_PLCR_PAR_R                     0x40000000
-+
-+/* shifts */
-+#define FM_PCD_PLCR_PAR_PNUM_SHIFT            16
-+
-+/* masks */
-+#define FM_PCD_PLCR_PEMODE_PI                 0x80000000
-+#define FM_PCD_PLCR_PEMODE_CBLND              0x40000000
-+#define FM_PCD_PLCR_PEMODE_ALG_MASK           0x30000000
-+#define FM_PCD_PLCR_PEMODE_ALG_RFC2698        0x10000000
-+#define FM_PCD_PLCR_PEMODE_ALG_RFC4115        0x20000000
-+#define FM_PCD_PLCR_PEMODE_DEFC_MASK          0x0C000000
-+#define FM_PCD_PLCR_PEMODE_DEFC_Y             0x04000000
-+#define FM_PCD_PLCR_PEMODE_DEFC_R             0x08000000
-+#define FM_PCD_PLCR_PEMODE_DEFC_OVERRIDE      0x0C000000
-+#define FM_PCD_PLCR_PEMODE_OVCLR_MASK         0x03000000
-+#define FM_PCD_PLCR_PEMODE_OVCLR_Y            0x01000000
-+#define FM_PCD_PLCR_PEMODE_OVCLR_R            0x02000000
-+#define FM_PCD_PLCR_PEMODE_OVCLR_G_NC         0x03000000
-+#define FM_PCD_PLCR_PEMODE_PKT                0x00800000
-+#define FM_PCD_PLCR_PEMODE_FPP_MASK           0x001F0000
-+#define FM_PCD_PLCR_PEMODE_FPP_SHIFT          16
-+#define FM_PCD_PLCR_PEMODE_FLS_MASK           0x0000F000
-+#define FM_PCD_PLCR_PEMODE_FLS_L2             0x00003000
-+#define FM_PCD_PLCR_PEMODE_FLS_L3             0x0000B000
-+#define FM_PCD_PLCR_PEMODE_FLS_L4             0x0000E000
-+#define FM_PCD_PLCR_PEMODE_FLS_FULL           0x0000F000
-+#define FM_PCD_PLCR_PEMODE_RBFLS              0x00000800
-+#define FM_PCD_PLCR_PEMODE_TRA                0x00000004
-+#define FM_PCD_PLCR_PEMODE_TRB                0x00000002
-+#define FM_PCD_PLCR_PEMODE_TRC                0x00000001
-+#define FM_PCD_PLCR_DOUBLE_ECC                0x80000000
-+#define FM_PCD_PLCR_INIT_ENTRY_ERROR          0x40000000
-+#define FM_PCD_PLCR_PRAM_SELF_INIT_COMPLETE   0x80000000
-+#define FM_PCD_PLCR_ATOMIC_ACTION_COMPLETE    0x40000000
-+
-+#define FM_PCD_PLCR_NIA_VALID                 0x80000000
-+
-+#define FM_PCD_PLCR_GCR_EN                    0x80000000
-+#define FM_PCD_PLCR_GCR_STEN                  0x40000000
-+#define FM_PCD_PLCR_GCR_DAR                   0x20000000
-+#define FM_PCD_PLCR_GCR_DEFNIA                0x00FFFFFF
-+#define FM_PCD_PLCR_NIA_ABS                   0x00000100
-+
-+#define FM_PCD_PLCR_GSR_BSY                   0x80000000
-+#define FM_PCD_PLCR_GSR_DQS                   0x60000000
-+#define FM_PCD_PLCR_GSR_RPB                   0x20000000
-+#define FM_PCD_PLCR_GSR_FQS                   0x0C000000
-+#define FM_PCD_PLCR_GSR_LPALG                 0x0000C000
-+#define FM_PCD_PLCR_GSR_LPCA                  0x00003000
-+#define FM_PCD_PLCR_GSR_LPNUM                 0x000000FF
-+
-+#define FM_PCD_PLCR_EVR_PSIC                  0x80000000
-+#define FM_PCD_PLCR_EVR_AAC                   0x40000000
-+
-+#define FM_PCD_PLCR_PAR_PSI                   0x20000000
-+#define FM_PCD_PLCR_PAR_PNUM                  0x00FF0000
-+/* PWSEL Selctive select options */
-+#define FM_PCD_PLCR_PAR_PWSEL_PEMODE          0x00008000    /* 0 */
-+#define FM_PCD_PLCR_PAR_PWSEL_PEGNIA          0x00004000    /* 1 */
-+#define FM_PCD_PLCR_PAR_PWSEL_PEYNIA          0x00002000    /* 2 */
-+#define FM_PCD_PLCR_PAR_PWSEL_PERNIA          0x00001000    /* 3 */
-+#define FM_PCD_PLCR_PAR_PWSEL_PECIR           0x00000800    /* 4 */
-+#define FM_PCD_PLCR_PAR_PWSEL_PECBS           0x00000400    /* 5 */
-+#define FM_PCD_PLCR_PAR_PWSEL_PEPIR_EIR       0x00000200    /* 6 */
-+#define FM_PCD_PLCR_PAR_PWSEL_PEPBS_EBS       0x00000100    /* 7 */
-+#define FM_PCD_PLCR_PAR_PWSEL_PELTS           0x00000080    /* 8 */
-+#define FM_PCD_PLCR_PAR_PWSEL_PECTS           0x00000040    /* 9 */
-+#define FM_PCD_PLCR_PAR_PWSEL_PEPTS_ETS       0x00000020    /* 10 */
-+#define FM_PCD_PLCR_PAR_PWSEL_PEGPC           0x00000010    /* 11 */
-+#define FM_PCD_PLCR_PAR_PWSEL_PEYPC           0x00000008    /* 12 */
-+#define FM_PCD_PLCR_PAR_PWSEL_PERPC           0x00000004    /* 13 */
-+#define FM_PCD_PLCR_PAR_PWSEL_PERYPC          0x00000002    /* 14 */
-+#define FM_PCD_PLCR_PAR_PWSEL_PERRPC          0x00000001    /* 15 */
-+
-+#define FM_PCD_PLCR_PAR_PMR_BRN_1TO1          0x0000   /* - Full bit replacement. {PBNUM[0:N-1]
-+                                                           1-> 2^N specific locations. */
-+#define FM_PCD_PLCR_PAR_PMR_BRN_2TO2          0x1      /* - {PBNUM[0:N-2],PNUM[N-1]}.
-+                                                           2-> 2^(N-1) base locations. */
-+#define FM_PCD_PLCR_PAR_PMR_BRN_4TO4          0x2      /* - {PBNUM[0:N-3],PNUM[N-2:N-1]}.
-+                                                           4-> 2^(N-2) base locations. */
-+#define FM_PCD_PLCR_PAR_PMR_BRN_8TO8          0x3      /* - {PBNUM[0:N-4],PNUM[N-3:N-1]}.
-+                                                           8->2^(N-3) base locations. */
-+#define FM_PCD_PLCR_PAR_PMR_BRN_16TO16        0x4      /* - {PBNUM[0:N-5],PNUM[N-4:N-1]}.
-+                                                           16-> 2^(N-4) base locations. */
-+#define FM_PCD_PLCR_PAR_PMR_BRN_32TO32        0x5      /* {PBNUM[0:N-6],PNUM[N-5:N-1]}.
-+                                                           32-> 2^(N-5) base locations. */
-+#define FM_PCD_PLCR_PAR_PMR_BRN_64TO64        0x6      /* {PBNUM[0:N-7],PNUM[N-6:N-1]}.
-+                                                           64-> 2^(N-6) base locations. */
-+#define FM_PCD_PLCR_PAR_PMR_BRN_128TO128      0x7      /* {PBNUM[0:N-8],PNUM[N-7:N-1]}.
-+                                                            128-> 2^(N-7) base locations. */
-+#define FM_PCD_PLCR_PAR_PMR_BRN_256TO256      0x8      /* - No bit replacement for N=8. {PNUM[N-8:N-1]}.
-+                                                            When N=8 this option maps all 256 profiles by the DISPATCH bus into one group. */
-+
-+#define FM_PCD_PLCR_PMR_V                     0x80000000
-+#define PLCR_ERR_ECC_CAP                      0x80000000
-+#define PLCR_ERR_ECC_TYPE_DOUBLE              0x40000000
-+#define PLCR_ERR_ECC_PNUM_MASK                0x00000FF0
-+#define PLCR_ERR_ECC_OFFSET_MASK              0x0000000F
-+
-+#define PLCR_ERR_UNINIT_CAP                   0x80000000
-+#define PLCR_ERR_UNINIT_NUM_MASK              0x000000FF
-+#define PLCR_ERR_UNINIT_PID_MASK              0x003f0000
-+#define PLCR_ERR_UNINIT_ABSOLUTE_MASK         0x00008000
-+
-+/* shifts */
-+#define PLCR_ERR_ECC_PNUM_SHIFT               4
-+#define PLCR_ERR_UNINIT_PID_SHIFT             16
-+
-+#define FM_PCD_PLCR_PMR_BRN_SHIFT             16
-+
-+#define PLCR_PORT_WINDOW_SIZE(hardwarePortId)
-+
-+
-+#endif /* __FM_PLCR_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_prs.c
-@@ -0,0 +1,423 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_pcd.c
-+
-+ @Description   FM PCD ...
-+*//***************************************************************************/
-+#include <linux/math64.h>
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "string_ext.h"
-+#include "debug_ext.h"
-+#include "net_ext.h"
-+
-+#include "fm_common.h"
-+#include "fm_pcd.h"
-+#include "fm_pcd_ipc.h"
-+#include "fm_prs.h"
-+#include "fsl_fman_prs.h"
-+
-+
-+static void PcdPrsErrorException(t_Handle h_FmPcd)
-+{
-+    t_FmPcd                 *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    uint32_t                event, ev_mask;
-+    struct fman_prs_regs     *PrsRegs = (struct fman_prs_regs *)p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs;
-+
-+    ASSERT_COND(p_FmPcd->guestId == NCSW_MASTER_ID);
-+    ev_mask = fman_prs_get_err_ev_mask(PrsRegs);
-+
-+    event = fman_prs_get_err_event(PrsRegs, ev_mask);
-+
-+    fman_prs_ack_err_event(PrsRegs, event);
-+
-+    DBG(TRACE, ("parser error - 0x%08x\n",event));
-+
-+    if(event & FM_PCD_PRS_DOUBLE_ECC)
-+        p_FmPcd->f_Exception(p_FmPcd->h_App,e_FM_PCD_PRS_EXCEPTION_DOUBLE_ECC);
-+}
-+
-+static void PcdPrsException(t_Handle h_FmPcd)
-+{
-+    t_FmPcd             *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    uint32_t            event, ev_mask;
-+    struct fman_prs_regs     *PrsRegs = (struct fman_prs_regs *)p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs;
-+
-+    ASSERT_COND(p_FmPcd->guestId == NCSW_MASTER_ID);
-+    ev_mask = fman_prs_get_expt_ev_mask(PrsRegs);
-+    event = fman_prs_get_expt_event(PrsRegs, ev_mask);
-+
-+    ASSERT_COND(event & FM_PCD_PRS_SINGLE_ECC);
-+
-+    DBG(TRACE, ("parser event - 0x%08x\n",event));
-+
-+    fman_prs_ack_expt_event(PrsRegs, event);
-+
-+    p_FmPcd->f_Exception(p_FmPcd->h_App,e_FM_PCD_PRS_EXCEPTION_SINGLE_ECC);
-+}
-+
-+t_Handle PrsConfig(t_FmPcd *p_FmPcd,t_FmPcdParams *p_FmPcdParams)
-+{
-+    t_FmPcdPrs  *p_FmPcdPrs;
-+    uintptr_t   baseAddr;
-+
-+    UNUSED(p_FmPcd);
-+    UNUSED(p_FmPcdParams);
-+
-+    p_FmPcdPrs = (t_FmPcdPrs *) XX_Malloc(sizeof(t_FmPcdPrs));
-+    if (!p_FmPcdPrs)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM Parser structure allocation FAILED"));
-+        return NULL;
-+    }
-+    memset(p_FmPcdPrs, 0, sizeof(t_FmPcdPrs));
-+    fman_prs_defconfig(&p_FmPcd->p_FmPcdDriverParam->dfltCfg);
-+
-+    if (p_FmPcd->guestId == NCSW_MASTER_ID)
-+    {
-+        baseAddr = FmGetPcdPrsBaseAddr(p_FmPcdParams->h_Fm);
-+        p_FmPcdPrs->p_SwPrsCode  = (uint32_t *)UINT_TO_PTR(baseAddr);
-+        p_FmPcdPrs->p_FmPcdPrsRegs  = (struct fman_prs_regs *)UINT_TO_PTR(baseAddr + PRS_REGS_OFFSET);
-+    }
-+
-+    p_FmPcdPrs->fmPcdPrsPortIdStatistics = p_FmPcd->p_FmPcdDriverParam->dfltCfg.port_id_stat;
-+    p_FmPcd->p_FmPcdDriverParam->prsMaxParseCycleLimit = p_FmPcd->p_FmPcdDriverParam->dfltCfg.max_prs_cyc_lim;
-+    p_FmPcd->exceptions |= p_FmPcd->p_FmPcdDriverParam->dfltCfg.prs_exceptions;
-+
-+    return p_FmPcdPrs;
-+}
-+
-+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+    static uint8_t             swPrsPatch[] = SW_PRS_UDP_LITE_PATCH;
-+#else
-+    static uint8_t             swPrsPatch[] = SW_PRS_OFFLOAD_PATCH;
-+#endif /* FM_CAPWAP_SUPPORT */
-+
-+t_Error PrsInit(t_FmPcd *p_FmPcd)
-+{
-+    t_FmPcdDriverParam  *p_Param = p_FmPcd->p_FmPcdDriverParam;
-+    uint32_t            *p_TmpCode;
-+    uint32_t            *p_LoadTarget = (uint32_t *)PTR_MOVE(p_FmPcd->p_FmPcdPrs->p_SwPrsCode,
-+                                                             FM_PCD_SW_PRS_SIZE-FM_PCD_PRS_SW_PATCHES_SIZE);
-+    struct fman_prs_regs *PrsRegs = (struct fman_prs_regs *)p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs;
-+    uint32_t            i;
-+
-+    ASSERT_COND(sizeof(swPrsPatch) <= (FM_PCD_PRS_SW_PATCHES_SIZE-FM_PCD_PRS_SW_TAIL_SIZE));
-+
-+    /* nothing to do in guest-partition */
-+    if (p_FmPcd->guestId != NCSW_MASTER_ID)
-+        return E_OK;
-+
-+    p_TmpCode = (uint32_t *)XX_MallocSmart(ROUND_UP(sizeof(swPrsPatch),4), 0, sizeof(uint32_t));
-+    if (!p_TmpCode)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Tmp Sw-Parser code allocation FAILED"));
-+    memset((uint8_t *)p_TmpCode, 0, ROUND_UP(sizeof(swPrsPatch),4));
-+    memcpy((uint8_t *)p_TmpCode, (uint8_t *)swPrsPatch, sizeof(swPrsPatch));
-+
-+    fman_prs_init(PrsRegs, &p_Param->dfltCfg);
-+
-+    /* register even if no interrupts enabled, to allow future enablement */
-+    FmRegisterIntr(p_FmPcd->h_Fm, e_FM_MOD_PRS, 0, e_FM_INTR_TYPE_ERR, PcdPrsErrorException, p_FmPcd);
-+
-+    /* register even if no interrupts enabled, to allow future enablement */
-+    FmRegisterIntr(p_FmPcd->h_Fm, e_FM_MOD_PRS, 0, e_FM_INTR_TYPE_NORMAL, PcdPrsException, p_FmPcd);
-+
-+    if(p_FmPcd->exceptions & FM_PCD_EX_PRS_SINGLE_ECC)
-+        FmEnableRamsEcc(p_FmPcd->h_Fm);
-+
-+    if(p_FmPcd->exceptions & FM_PCD_EX_PRS_DOUBLE_ECC)
-+        FmEnableRamsEcc(p_FmPcd->h_Fm);
-+
-+    /* load sw parser Ip-Frag patch */
-+    for (i=0; i<DIV_CEIL(sizeof(swPrsPatch), 4); i++)
-+        WRITE_UINT32(p_LoadTarget[i], GET_UINT32(p_TmpCode[i]));
-+
-+    XX_FreeSmart(p_TmpCode);
-+
-+    return E_OK;
-+}
-+
-+void PrsFree(t_FmPcd *p_FmPcd)
-+{
-+    ASSERT_COND(p_FmPcd->guestId == NCSW_MASTER_ID);
-+    FmUnregisterIntr(p_FmPcd->h_Fm, e_FM_MOD_PRS, 0, e_FM_INTR_TYPE_ERR);
-+    /* register even if no interrupts enabled, to allow future enablement */
-+    FmUnregisterIntr(p_FmPcd->h_Fm, e_FM_MOD_PRS, 0, e_FM_INTR_TYPE_NORMAL);
-+}
-+
-+void PrsEnable(t_FmPcd *p_FmPcd)
-+{
-+    struct fman_prs_regs *PrsRegs = (struct fman_prs_regs *)p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs;
-+
-+    ASSERT_COND(p_FmPcd->guestId == NCSW_MASTER_ID);
-+    fman_prs_enable(PrsRegs);
-+}
-+
-+void PrsDisable(t_FmPcd *p_FmPcd)
-+{
-+    struct fman_prs_regs *PrsRegs = (struct fman_prs_regs *)p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs;
-+
-+    ASSERT_COND(p_FmPcd->guestId == NCSW_MASTER_ID);
-+    fman_prs_disable(PrsRegs);
-+}
-+
-+int PrsIsEnabled(t_FmPcd *p_FmPcd)
-+{
-+    struct fman_prs_regs *PrsRegs = (struct fman_prs_regs *)p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs;
-+
-+    ASSERT_COND(p_FmPcd->guestId == NCSW_MASTER_ID);
-+    return fman_prs_is_enabled(PrsRegs);
-+}
-+
-+t_Error PrsIncludePortInStatistics(t_FmPcd *p_FmPcd, uint8_t hardwarePortId, bool include)
-+{
-+    struct fman_prs_regs *PrsRegs;
-+    uint32_t    bitMask = 0;
-+    uint8_t     prsPortId;
-+
-+    SANITY_CHECK_RETURN_ERROR((hardwarePortId >=1 && hardwarePortId <= 16), E_INVALID_VALUE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdPrs, E_INVALID_HANDLE);
-+
-+    PrsRegs = (struct fman_prs_regs *)p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs;
-+
-+    GET_FM_PCD_PRS_PORT_ID(prsPortId, hardwarePortId);
-+    GET_FM_PCD_INDEX_FLAG(bitMask, prsPortId);
-+
-+    if (include)
-+        p_FmPcd->p_FmPcdPrs->fmPcdPrsPortIdStatistics |= bitMask;
-+    else
-+        p_FmPcd->p_FmPcdPrs->fmPcdPrsPortIdStatistics &= ~bitMask;
-+
-+    fman_prs_set_stst_port_msk(PrsRegs,
-+            p_FmPcd->p_FmPcdPrs->fmPcdPrsPortIdStatistics);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmPcdPrsIncludePortInStatistics(t_Handle h_FmPcd, uint8_t hardwarePortId, bool include)
-+{
-+    t_FmPcd                     *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    t_Error                     err;
-+
-+    SANITY_CHECK_RETURN_ERROR((hardwarePortId >=1 && hardwarePortId <= 16), E_INVALID_VALUE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdPrs, E_INVALID_HANDLE);
-+
-+    if ((p_FmPcd->guestId != NCSW_MASTER_ID) &&
-+        p_FmPcd->h_IpcSession)
-+    {
-+        t_FmPcdIpcPrsIncludePort    prsIncludePortParams;
-+        t_FmPcdIpcMsg               msg;
-+
-+        prsIncludePortParams.hardwarePortId = hardwarePortId;
-+        prsIncludePortParams.include = include;
-+        memset(&msg, 0, sizeof(msg));
-+        msg.msgId = FM_PCD_PRS_INC_PORT_STATS;
-+        memcpy(msg.msgBody, &prsIncludePortParams, sizeof(prsIncludePortParams));
-+        err = XX_IpcSendMessage(p_FmPcd->h_IpcSession,
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId) +sizeof(prsIncludePortParams),
-+                                NULL,
-+                                NULL,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        return E_OK;
-+    }
-+    else if (p_FmPcd->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("running in guest-mode without IPC!"));
-+
-+    return PrsIncludePortInStatistics(p_FmPcd, hardwarePortId, include);
-+}
-+
-+uint32_t FmPcdGetSwPrsOffset(t_Handle h_FmPcd, e_NetHeaderType hdr, uint8_t indexPerHdr)
-+{
-+    t_FmPcd                 *p_FmPcd = (t_FmPcd *)h_FmPcd;
-+    t_FmPcdPrsLabelParams   *p_Label;
-+    int                     i;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmPcd, E_INVALID_HANDLE, 0);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmPcd->p_FmPcdDriverParam, E_INVALID_HANDLE, 0);
-+
-+    if ((p_FmPcd->guestId != NCSW_MASTER_ID) &&
-+        p_FmPcd->h_IpcSession)
-+    {
-+        t_Error                 err = E_OK;
-+        t_FmPcdIpcSwPrsLable    labelParams;
-+        t_FmPcdIpcMsg           msg;
-+        uint32_t                prsOffset = 0;
-+        t_FmPcdIpcReply         reply;
-+        uint32_t                replyLength;
-+
-+        memset(&reply, 0, sizeof(reply));
-+        memset(&msg, 0, sizeof(msg));
-+        labelParams.enumHdr = (uint32_t)hdr;
-+        labelParams.indexPerHdr = indexPerHdr;
-+        msg.msgId = FM_PCD_GET_SW_PRS_OFFSET;
-+        memcpy(msg.msgBody, &labelParams, sizeof(labelParams));
-+        replyLength = sizeof(uint32_t) + sizeof(uint32_t);
-+        err = XX_IpcSendMessage(p_FmPcd->h_IpcSession,
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId) +sizeof(labelParams),
-+                                (uint8_t*)&reply,
-+                                &replyLength,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        if (replyLength != sizeof(uint32_t) + sizeof(uint32_t))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+
-+        memcpy((uint8_t*)&prsOffset, reply.replyBody, sizeof(uint32_t));
-+        return prsOffset;
-+    }
-+    else if (p_FmPcd->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("running in guest-mode without IPC!"));
-+
-+    ASSERT_COND(p_FmPcd->p_FmPcdPrs->currLabel < FM_PCD_PRS_NUM_OF_LABELS);
-+
-+    for (i=0; i<p_FmPcd->p_FmPcdPrs->currLabel; i++)
-+    {
-+        p_Label = &p_FmPcd->p_FmPcdPrs->labelsTable[i];
-+
-+        if ((hdr == p_Label->hdr) && (indexPerHdr == p_Label->indexPerHdr))
-+            return p_Label->instructionOffset;
-+    }
-+
-+    REPORT_ERROR(MAJOR, E_NOT_FOUND, ("Sw Parser attachment Not found"));
-+    return (uint32_t)ILLEGAL_BASE;
-+}
-+
-+void FM_PCD_SetPrsStatistics(t_Handle h_FmPcd, bool enable)
-+{
-+    t_FmPcd             *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    struct fman_prs_regs *PrsRegs;
-+
-+    SANITY_CHECK_RETURN(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN(p_FmPcd->p_FmPcdPrs, E_INVALID_HANDLE);
-+
-+    PrsRegs = (struct fman_prs_regs *)p_FmPcd->p_FmPcdPrs->p_FmPcdPrsRegs;
-+
-+
-+    if(p_FmPcd->guestId != NCSW_MASTER_ID)
-+    {
-+        REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("FM_PCD_SetPrsStatistics - guest mode!"));
-+        return;
-+    }
-+
-+    fman_prs_set_stst(PrsRegs, enable);
-+}
-+
-+t_Error FM_PCD_PrsLoadSw(t_Handle h_FmPcd, t_FmPcdPrsSwParams *p_SwPrs)
-+{
-+    t_FmPcd                 *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+    uint32_t                *p_LoadTarget;
-+    uint32_t                *p_TmpCode;
-+    int                     i;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPcd->p_FmPcdDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdPrs, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_SwPrs, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPcd->enabled, E_INVALID_HANDLE);
-+
-+    if (p_FmPcd->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("FM in guest-mode!"));
-+
-+    if (!p_SwPrs->override)
-+    {
-+        if(p_FmPcd->p_FmPcdPrs->p_CurrSwPrs > p_FmPcd->p_FmPcdPrs->p_SwPrsCode + p_SwPrs->base*2/4)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("SW parser base must be larger than current loaded code"));
-+    }
-+    else
-+        p_FmPcd->p_FmPcdPrs->currLabel = 0;
-+
-+    if (p_SwPrs->size > FM_PCD_SW_PRS_SIZE - FM_PCD_PRS_SW_TAIL_SIZE - p_SwPrs->base*2)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("p_SwPrs->size may not be larger than MAX_SW_PRS_CODE_SIZE"));
-+
-+    if (p_FmPcd->p_FmPcdPrs->currLabel + p_SwPrs->numOfLabels > FM_PCD_PRS_NUM_OF_LABELS)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Exceeded number of labels allowed "));
-+
-+    p_TmpCode = (uint32_t *)XX_MallocSmart(ROUND_UP(p_SwPrs->size,4), 0, sizeof(uint32_t));
-+    if (!p_TmpCode)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Tmp Sw-Parser code allocation FAILED"));
-+    memset((uint8_t *)p_TmpCode, 0, ROUND_UP(p_SwPrs->size,4));
-+    memcpy((uint8_t *)p_TmpCode, p_SwPrs->p_Code, p_SwPrs->size);
-+
-+    /* save sw parser labels */
-+    memcpy(&p_FmPcd->p_FmPcdPrs->labelsTable[p_FmPcd->p_FmPcdPrs->currLabel],
-+           p_SwPrs->labelsTable,
-+           p_SwPrs->numOfLabels*sizeof(t_FmPcdPrsLabelParams));
-+    p_FmPcd->p_FmPcdPrs->currLabel += p_SwPrs->numOfLabels;
-+
-+    /* load sw parser code */
-+    p_LoadTarget = p_FmPcd->p_FmPcdPrs->p_SwPrsCode + p_SwPrs->base*2/4;
-+
-+    for(i=0; i<DIV_CEIL(p_SwPrs->size, 4); i++)
-+        WRITE_UINT32(p_LoadTarget[i], GET_UINT32(p_TmpCode[i]));
-+
-+    p_FmPcd->p_FmPcdPrs->p_CurrSwPrs =
-+        p_FmPcd->p_FmPcdPrs->p_SwPrsCode + p_SwPrs->base*2/4 + ROUND_UP(p_SwPrs->size,4);
-+
-+    /* copy data parameters */
-+    for (i=0;i<FM_PCD_PRS_NUM_OF_HDRS;i++)
-+        WRITE_UINT32(*(p_FmPcd->p_FmPcdPrs->p_SwPrsCode+PRS_SW_DATA/4+i), p_SwPrs->swPrsDataParams[i]);
-+
-+    /* Clear last 4 bytes */
-+    WRITE_UINT32(*(p_FmPcd->p_FmPcdPrs->p_SwPrsCode+(PRS_SW_DATA-FM_PCD_PRS_SW_TAIL_SIZE)/4), 0);
-+
-+    XX_FreeSmart(p_TmpCode);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_ConfigPrsMaxCycleLimit(t_Handle h_FmPcd,uint16_t value)
-+{
-+    t_FmPcd *p_FmPcd = (t_FmPcd*)h_FmPcd;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPcd->p_FmPcdDriverParam, E_INVALID_HANDLE);
-+
-+    if(p_FmPcd->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("FM_PCD_ConfigPrsMaxCycleLimit - guest mode!"));
-+
-+    p_FmPcd->p_FmPcdDriverParam->prsMaxParseCycleLimit = value;
-+
-+    return E_OK;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_prs.h
-@@ -0,0 +1,316 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_prs.h
-+
-+ @Description   FM Parser private header
-+ *//***************************************************************************/
-+#ifndef __FM_PRS_H
-+#define __FM_PRS_H
-+
-+#include "std_ext.h"
-+
-+/***********************************************************************/
-+/*          SW parser IP_FRAG patch                                    */
-+/***********************************************************************/
-+
-+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+#define SW_PRS_UDP_LITE_PATCH   \
-+{\
-+        0x31,0x52,0x00,0xDA,0xFC,0x00,0x00,0x00,0x00,0x00, \
-+        0x00,0x00,0x50,0x2C,0x40,0x00,0x31,0x92,0x50,0x2C, \
-+        0x00,0x88,0x18,0x2F,0x00,0x01,0x1B,0xFE,0x18,0x71, \
-+        0x02,0x1F,0x00,0x08,0x00,0x83,0x02,0x1F,0x00,0x20, \
-+        0x28,0x1B,0x00,0x05,0x29,0x1F,0x30,0xD0,0x60,0x4F, \
-+        0x00,0x07,0x00,0x05,0x00,0x00,0xC3,0x8F,0x00,0x52, \
-+        0x00,0x01,0x07,0x01,0x60,0x3B,0x00,0x00,0x30,0xD0, \
-+        0x00,0xDA,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00, \
-+        0x40,0x4C,0x00,0x00,0x02,0x8F,0x00,0x00,0x30,0xF2, \
-+        0x00,0x06,0x18,0x5D,0x00,0x00,0x9F,0xFF,0x30,0xF2, \
-+        0x00,0x06,0x29,0x1E,0x07,0x08,0x30,0xD0,0x00,0x52, \
-+        0x00,0x08,0x28,0x1A,0x60,0x37,0x00,0x00,0x30,0xF2, \
-+        0x18,0x5D,0x06,0x00,0x29,0x1E,0x30,0xF2,0x2F,0x0E, \
-+        0x30,0x72,0x00,0x00,0x9B,0x8F,0x00,0x06,0x2F,0x0E, \
-+        0x32,0xF1,0x32,0xB0,0x00,0x4F,0x00,0x57,0x00,0x28, \
-+        0x00,0x00,0x97,0x9E,0x00,0x4E,0x30,0x72,0x00,0x06, \
-+        0x2F,0x0E,0x32,0xC1,0x32,0xF0,0x00,0x4A,0x00,0x80, \
-+        0x00,0x02,0x00,0x00,0x97,0x9E,0x40,0x7E,0x00,0x08, \
-+        0x08,0x16,0x00,0x54,0x00,0x01,0x1B,0xFE,0x00,0x00, \
-+        0x9F,0x9E,0x40,0xB3,0x00,0x00,0x02,0x1F,0x00,0x08, \
-+        0x28,0x1B,0x30,0x73,0x29,0x1F,0x30,0xD0,0x60,0x9F, \
-+        0x00,0x07,0x00,0x05,0x00,0x00,0xC3,0x8F,0x00,0x52, \
-+        0x00,0x01,0x07,0x01,0x60,0x8B,0x00,0x00,0x30,0xD0, \
-+        0x00,0xDA,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00, \
-+        0x40,0x9C,0x00,0x00,0x02,0x8F,0x00,0x00,0x30,0xF2, \
-+        0x00,0x06,0x18,0xAD,0x00,0x00,0x9F,0xFF,0x30,0xF2, \
-+        0x00,0x06,0x29,0x1E,0x07,0x08,0x30,0xD0,0x00,0x52, \
-+        0x00,0x08,0x28,0x1A,0x60,0x87,0x00,0x00,0x30,0xF2, \
-+        0x18,0xAD,0x06,0x00,0x29,0x1E,0x30,0xF2,0x50,0xB3, \
-+        0xFF,0xFF,0x18,0xB8,0x08,0x16,0x00,0x54,0x00,0x01, \
-+        0x1B,0xFE,0x18,0xC5,0x32,0xF1,0x28,0x5D,0x32,0xF1, \
-+        0x00,0x55,0x00,0x08,0x28,0x5F,0x00,0x00,0x8F,0x9F, \
-+        0x29,0x33,0x08,0x16,0x00,0x49,0x00,0x01,0x1B,0xFF, \
-+        0x00,0x01,0x1B,0xFF    \
-+}
-+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
-+
-+#if (DPAA_VERSION == 10)
-+/* Version: 106.1.9 */
-+#define SW_PRS_OFFLOAD_PATCH                           \
-+{                                                      \
-+    0x31,0x52,0x00,0xDA,0x0A,0x00,0x00,0x00,0x00,0x00, \
-+    0x00,0x00,0x43,0x0A,0x00,0x00,0x00,0x01,0x1B,0xFE, \
-+    0x00,0x00,0x99,0x00,0x53,0x13,0x00,0x00,0x00,0x00, \
-+    0x9F,0x98,0x53,0x13,0x00,0x00,0x1B,0x23,0x33,0xF1, \
-+    0x00,0xF9,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00, \
-+    0x28,0x7F,0x00,0x03,0x00,0x02,0x00,0x00,0x00,0x01, \
-+    0x32,0xC1,0x32,0xF0,0x00,0x4A,0x00,0x80,0x1F,0xFF, \
-+    0x00,0x01,0x1B,0xFE,0x31,0x52,0x00,0xDA,0x06,0x00, \
-+    0x00,0x00,0x00,0x00,0x00,0x00,0x43,0x2F,0x00,0x00, \
-+    0x00,0x01,0x1B,0xFE,0x31,0x52,0x00,0xDA,0x00,0x40, \
-+    0x00,0x00,0x00,0x00,0x00,0x00,0x53,0x95,0x00,0x00, \
-+    0x00,0x00,0x9B,0x8F,0x2F,0x0F,0x32,0xC1,0x00,0x55, \
-+    0x00,0x28,0x28,0x43,0x30,0x7E,0x43,0x45,0x00,0x00, \
-+    0x30,0x7E,0x43,0x45,0x00,0x3C,0x1B,0x5D,0x32,0x11, \
-+    0x32,0xC0,0x00,0x4F,0x00,0x81,0x00,0x00,0x83,0x8F, \
-+    0x2F,0x0F,0x06,0x00,0x32,0x11,0x32,0xC0,0x00,0x4F, \
-+    0x00,0x55,0x00,0x01,0x00,0x81,0x32,0x11,0x00,0x00, \
-+    0x83,0x8E,0x00,0x50,0x00,0x01,0x01,0x04,0x00,0x4D, \
-+    0x28,0x43,0x06,0x00,0x1B,0x3E,0x30,0x7E,0x53,0x79, \
-+    0x00,0x2B,0x32,0x11,0x32,0xC0,0x00,0x4F,0x00,0x81, \
-+    0x00,0x00,0x87,0x8F,0x28,0x23,0x06,0x00,0x32,0x11, \
-+    0x32,0xC0,0x00,0x4F,0x00,0x55,0x00,0x01,0x00,0x81, \
-+    0x32,0x11,0x00,0x00,0x83,0x8E,0x00,0x50,0x00,0x01, \
-+    0x01,0x04,0x00,0x4D,0x28,0x43,0x06,0x00,0x00,0x01, \
-+    0x1B,0xFE,0x00,0x00,0x9B,0x8E,0x53,0x90,0x00,0x00, \
-+    0x06,0x29,0x00,0x00,0x83,0x8F,0x28,0x23,0x06,0x00, \
-+    0x06,0x29,0x32,0xC1,0x00,0x55,0x00,0x28,0x00,0x00, \
-+    0x83,0x8E,0x00,0x50,0x00,0x01,0x01,0x04,0x00,0x4D, \
-+    0x28,0x43,0x06,0x00,0x00,0x01,0x1B,0xFE,0x32,0xC1, \
-+    0x00,0x55,0x00,0x28,0x28,0x43,0x1B,0xCF,0x00,0x00, \
-+    0x9B,0x8F,0x2F,0x0F,0x32,0xC1,0x00,0x55,0x00,0x28, \
-+    0x28,0x43,0x30,0x7E,0x43,0xBF,0x00,0x2C,0x32,0x11, \
-+    0x32,0xC0,0x00,0x4F,0x00,0x81,0x00,0x00,0x87,0x8F, \
-+    0x28,0x23,0x06,0x00,0x32,0x11,0x32,0xC0,0x00,0x4F, \
-+    0x00,0x81,0x00,0x00,0x83,0x8F,0x2F,0x0F,0x06,0x00, \
-+    0x32,0x11,0x32,0xC0,0x00,0x4F,0x00,0x55,0x00,0x01, \
-+    0x00,0x81,0x32,0x11,0x00,0x00,0x83,0x8E,0x00,0x50, \
-+    0x00,0x01,0x01,0x04,0x00,0x4D,0x28,0x43,0x06,0x00, \
-+    0x1B,0x9C,0x33,0xF1,0x00,0xF9,0x00,0x01,0x00,0x00, \
-+    0x00,0x00,0x00,0x00,0x28,0x7F,0x00,0x03,0x00,0x02, \
-+    0x00,0x00,0x00,0x01,0x32,0xC1,0x32,0xF0,0x00,0x4A, \
-+    0x00,0x80,0x1F,0xFF,0x00,0x01,0x1B,0xFE,           \
-+}
-+
-+#else
-+#define SW_PRS_OFFLOAD_PATCH                           \
-+{                                                      \
-+    0x31,0x52,0x00,0xDA,0x0E,0x4F,0x00,0x00,0x00,0x00, \
-+    0x00,0x00,0x51,0x16,0x08,0x4B,0x31,0x53,0x00,0xFB, \
-+    0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x29,0x2B, \
-+    0x33,0xF1,0x00,0xFB,0x00,0xDF,0x00,0x00,0x00,0x00, \
-+    0x00,0x00,0x28,0x7F,0x31,0x52,0x00,0xDA,0x0A,0x00, \
-+    0x00,0x00,0x00,0x00,0x00,0x00,0x41,0x20,0x00,0x00, \
-+    0x00,0x01,0x1B,0xFE,0x00,0x00,0x99,0x00,0x51,0x29, \
-+    0x00,0x00,0x00,0x00,0x9F,0x98,0x51,0x29,0x00,0x00, \
-+    0x19,0x44,0x09,0x5F,0x00,0x20,0x00,0x00,0x09,0x4F, \
-+    0x00,0x20,0x00,0x00,0x34,0xB7,0x00,0xF9,0x00,0x00, \
-+    0x01,0x00,0x00,0x00,0x00,0x00,0x2B,0x97,0x31,0xB3, \
-+    0x29,0x8F,0x33,0xF1,0x00,0xF9,0x00,0x01,0x00,0x00, \
-+    0x00,0x00,0x00,0x00,0x28,0x7F,0x00,0x03,0x00,0x02, \
-+    0x00,0x00,0x00,0x01,0x1B,0xFE,0x00,0x01,0x1B,0xFE, \
-+    0x31,0x52,0x00,0xDA,0xFC,0x00,0x00,0x00,0x00,0x00, \
-+    0x00,0x00,0x51,0x52,0x40,0x00,0x31,0x92,0x51,0x52, \
-+    0x00,0x88,0x19,0x55,0x08,0x05,0x00,0x00,0x19,0x99, \
-+    0x02,0x1F,0x00,0x08,0x00,0x83,0x02,0x1F,0x00,0x20, \
-+    0x28,0x1B,0x00,0x05,0x29,0x1F,0x30,0xD0,0x61,0x75, \
-+    0x00,0x07,0x00,0x05,0x00,0x00,0xC3,0x8F,0x00,0x52, \
-+    0x00,0x01,0x07,0x01,0x61,0x61,0x00,0x00,0x30,0xD0, \
-+    0x00,0xDA,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00, \
-+    0x41,0x72,0x00,0x00,0x02,0x8F,0x00,0x00,0x30,0xF2, \
-+    0x00,0x06,0x19,0x83,0x00,0x00,0x9F,0xFF,0x30,0xF2, \
-+    0x00,0x06,0x29,0x1E,0x07,0x08,0x30,0xD0,0x00,0x52, \
-+    0x00,0x08,0x28,0x1A,0x61,0x5D,0x00,0x00,0x30,0xF2, \
-+    0x19,0x83,0x06,0x00,0x29,0x1E,0x30,0xF2,0x29,0x0E, \
-+    0x30,0x72,0x00,0x00,0x9B,0x8F,0x00,0x06,0x29,0x0E, \
-+    0x32,0xF1,0x32,0xB0,0x00,0x4F,0x00,0x57,0x00,0x28, \
-+    0x00,0x00,0x97,0x9E,0x00,0x4E,0x30,0x72,0x00,0x06, \
-+    0x29,0x0E,0x08,0x05,0x00,0x01,0x31,0x52,0x00,0xDA, \
-+    0x0E,0x4F,0x00,0x00,0x00,0x00,0x00,0x00,0x51,0xAF, \
-+    0x04,0x4B,0x31,0x53,0x00,0xFB,0xFF,0xF0,0x00,0x00, \
-+    0x00,0x00,0x00,0x00,0x29,0x2B,0x33,0xF1,0x00,0xFB, \
-+    0x00,0xDF,0x00,0x00,0x00,0x00,0x00,0x00,0x28,0x7F, \
-+    0x31,0x52,0x00,0xDA,0x06,0x00,0x00,0x00,0x00,0x00, \
-+    0x00,0x00,0x41,0xB9,0x00,0x00,0x00,0x01,0x1B,0xFE, \
-+    0x31,0x52,0x00,0xDA,0x00,0x40,0x00,0x00,0x00,0x00, \
-+    0x00,0x00,0x42,0x06,0x00,0x00,0x00,0x00,0x9B,0x8F, \
-+    0x28,0x01,0x32,0xC1,0x00,0x55,0x00,0x28,0x28,0x43, \
-+    0x30,0x00,0x41,0xEB,0x00,0x2C,0x32,0x11,0x32,0xC0, \
-+    0x00,0x4F,0x00,0x81,0x00,0x00,0x87,0x8F,0x28,0x23, \
-+    0x06,0x00,0x32,0x11,0x32,0xC0,0x00,0x4F,0x00,0x81, \
-+    0x00,0x00,0x83,0x8F,0x28,0x01,0x06,0x00,0x32,0x11, \
-+    0x32,0xC0,0x00,0x4F,0x00,0x55,0x00,0x01,0x00,0x81, \
-+    0x32,0x11,0x00,0x00,0x83,0x8E,0x00,0x50,0x00,0x01, \
-+    0x01,0x04,0x00,0x4D,0x28,0x43,0x06,0x00,0x19,0xC8, \
-+    0x09,0x5F,0x00,0x20,0x00,0x00,0x09,0x4F,0x00,0x20, \
-+    0x00,0x00,0x34,0xB7,0x00,0xF9,0x00,0x00,0x01,0x00, \
-+    0x00,0x00,0x00,0x00,0x2B,0x97,0x31,0xB3,0x29,0x8F, \
-+    0x33,0xF1,0x00,0xF9,0x00,0x01,0x00,0x00,0x00,0x00, \
-+    0x00,0x00,0x28,0x7F,0x00,0x03,0x00,0x02,0x00,0x00, \
-+    0x00,0x01,0x1B,0xFE,0x30,0x50,0x52,0x0B,0x00,0x00, \
-+    0x00,0x01,0x1B,0xFE,0x32,0xF1,0x32,0xC0,0x00,0x4F, \
-+    0x00,0x81,0x00,0x02,0x00,0x00,0x97,0x9E,0x42,0x18, \
-+    0x00,0x08,0x08,0x16,0x00,0x54,0x00,0x01,0x1B,0xFE, \
-+    0x00,0x00,0x9F,0x9E,0x42,0x4D,0x00,0x00,0x02,0x1F, \
-+    0x00,0x08,0x28,0x1B,0x30,0x73,0x29,0x1F,0x30,0xD0, \
-+    0x62,0x39,0x00,0x07,0x00,0x05,0x00,0x00,0xC3,0x8F, \
-+    0x00,0x52,0x00,0x01,0x07,0x01,0x62,0x25,0x00,0x00, \
-+    0x30,0xD0,0x00,0xDA,0x00,0x01,0x00,0x00,0x00,0x00, \
-+    0x00,0x00,0x42,0x36,0x00,0x00,0x02,0x8F,0x00,0x00, \
-+    0x30,0xF2,0x00,0x06,0x1A,0x47,0x00,0x00,0x9F,0xFF, \
-+    0x30,0xF2,0x00,0x06,0x29,0x1E,0x07,0x08,0x30,0xD0, \
-+    0x00,0x52,0x00,0x08,0x28,0x1A,0x62,0x21,0x00,0x00, \
-+    0x30,0xF2,0x1A,0x47,0x06,0x00,0x29,0x1E,0x30,0xF2, \
-+    0x52,0x4D,0xFF,0xFF,0x1A,0x52,0x08,0x16,0x00,0x54, \
-+    0x00,0x01,0x1B,0xFE,0x1A,0x5F,0x32,0xF1,0x28,0x5D, \
-+    0x32,0xF1,0x00,0x55,0x00,0x08,0x28,0x5F,0x00,0x00, \
-+    0x8F,0x9F,0x29,0x33,0x08,0x16,0x00,0x49,0x00,0x01, \
-+    0x1B,0xFF,0x00,0x01,0x1B,0xFF,0x31,0x52,0x00,0xDA, \
-+    0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x52,0x6D, \
-+    0x40,0x00,0x31,0x92,0x52,0x6D,0x00,0x88,0x1A,0x70, \
-+    0x08,0x05,0x00,0x00,0x1A,0xB4,0x02,0x1F,0x00,0x08, \
-+    0x00,0x83,0x02,0x1F,0x00,0x20,0x28,0x1B,0x00,0x05, \
-+    0x29,0x1F,0x30,0xD0,0x62,0x90,0x00,0x07,0x00,0x05, \
-+    0x00,0x00,0xC3,0x8F,0x00,0x52,0x00,0x01,0x07,0x01, \
-+    0x62,0x7C,0x00,0x00,0x30,0xD0,0x00,0xDA,0x00,0x01, \
-+    0x00,0x00,0x00,0x00,0x00,0x00,0x42,0x8D,0x00,0x00, \
-+    0x02,0x8F,0x00,0x00,0x30,0xF2,0x00,0x06,0x1A,0x9E, \
-+    0x00,0x00,0x9F,0xFF,0x30,0xF2,0x00,0x06,0x29,0x1E, \
-+    0x07,0x08,0x30,0xD0,0x00,0x52,0x00,0x08,0x28,0x1A, \
-+    0x62,0x78,0x00,0x00,0x30,0xF2,0x1A,0x9E,0x06,0x00, \
-+    0x29,0x1E,0x30,0xF2,0x29,0x0E,0x30,0x72,0x00,0x00, \
-+    0x9B,0x8F,0x00,0x06,0x29,0x0E,0x32,0xF1,0x32,0xB0, \
-+    0x00,0x4F,0x00,0x57,0x00,0x28,0x00,0x00,0x97,0x9E, \
-+    0x00,0x4E,0x30,0x72,0x00,0x06,0x29,0x0E,0x08,0x05, \
-+    0x00,0x01,0x31,0x52,0x00,0xDA,0x0E,0x4F,0x00,0x00, \
-+    0x00,0x00,0x00,0x00,0x52,0xCA,0x04,0x4B,0x31,0x53, \
-+    0x00,0xFB,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00, \
-+    0x29,0x2B,0x33,0xF1,0x00,0xFB,0x00,0xDF,0x00,0x00, \
-+    0x00,0x00,0x00,0x00,0x28,0x7F,0x31,0x52,0x00,0xDA, \
-+    0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x42,0xD4, \
-+    0x00,0x00,0x00,0x01,0x1B,0xFE,0x31,0x52,0x00,0xDA, \
-+    0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x53,0x37, \
-+    0x00,0x00,0x00,0x00,0x9B,0x8F,0x28,0x01,0x32,0xC1, \
-+    0x00,0x55,0x00,0x28,0x28,0x43,0x30,0x00,0x42,0xEA, \
-+    0x00,0x00,0x30,0x00,0x42,0xEA,0x00,0x3C,0x1B,0x02, \
-+    0x32,0x11,0x32,0xC0,0x00,0x4F,0x00,0x81,0x00,0x00, \
-+    0x83,0x8F,0x28,0x01,0x06,0x00,0x32,0x11,0x32,0xC0, \
-+    0x00,0x4F,0x00,0x55,0x00,0x01,0x00,0x81,0x32,0x11, \
-+    0x00,0x00,0x83,0x8E,0x00,0x50,0x00,0x01,0x01,0x04, \
-+    0x00,0x4D,0x28,0x43,0x06,0x00,0x1A,0xE3,0x30,0x00, \
-+    0x43,0x20,0x00,0x2B,0x00,0x00,0x9B,0x8E,0x43,0x0E, \
-+    0x00,0x00,0x32,0xC1,0x00,0x55,0x00,0x28,0x28,0x43, \
-+    0x1B,0x1F,0x06,0x29,0x00,0x00,0x83,0x8F,0x28,0x23, \
-+    0x06,0x00,0x06,0x29,0x32,0xC1,0x00,0x55,0x00,0x28, \
-+    0x00,0x00,0x83,0x8E,0x00,0x50,0x00,0x01,0x01,0x04, \
-+    0x00,0x4D,0x28,0x43,0x06,0x00,0x1B,0x37,0x32,0x11, \
-+    0x32,0xC0,0x00,0x4F,0x00,0x81,0x00,0x00,0x87,0x8F, \
-+    0x28,0x23,0x06,0x00,0x32,0x11,0x32,0xC0,0x00,0x4F, \
-+    0x00,0x55,0x00,0x01,0x00,0x81,0x32,0x11,0x00,0x00, \
-+    0x83,0x8E,0x00,0x50,0x00,0x01,0x01,0x04,0x00,0x4D, \
-+    0x28,0x43,0x06,0x00,0x30,0x50,0x53,0x3C,0x00,0x00, \
-+    0x00,0x01,0x1B,0xFE,0x32,0xF1,0x32,0xC0,0x00,0x4F, \
-+    0x00,0x81,0x00,0x02,0x00,0x00,0x97,0x9E,0x43,0x49, \
-+    0x00,0x08,0x08,0x16,0x00,0x54,0x00,0x01,0x1B,0xFE, \
-+    0x00,0x00,0x9F,0x9E,0x43,0x7E,0x00,0x00,0x02,0x1F, \
-+    0x00,0x08,0x28,0x1B,0x30,0x73,0x29,0x1F,0x30,0xD0, \
-+    0x63,0x6A,0x00,0x07,0x00,0x05,0x00,0x00,0xC3,0x8F, \
-+    0x00,0x52,0x00,0x01,0x07,0x01,0x63,0x56,0x00,0x00, \
-+    0x30,0xD0,0x00,0xDA,0x00,0x01,0x00,0x00,0x00,0x00, \
-+    0x00,0x00,0x43,0x67,0x00,0x00,0x02,0x8F,0x00,0x00, \
-+    0x30,0xF2,0x00,0x06,0x1B,0x78,0x00,0x00,0x9F,0xFF, \
-+    0x30,0xF2,0x00,0x06,0x29,0x1E,0x07,0x08,0x30,0xD0, \
-+    0x00,0x52,0x00,0x08,0x28,0x1A,0x63,0x52,0x00,0x00, \
-+    0x30,0xF2,0x1B,0x78,0x06,0x00,0x29,0x1E,0x30,0xF2, \
-+    0x53,0x7E,0xFF,0xFF,0x1B,0x83,0x08,0x16,0x00,0x54, \
-+    0x00,0x01,0x1B,0xFE,0x1B,0x90,0x32,0xF1,0x28,0x5D, \
-+    0x32,0xF1,0x00,0x55,0x00,0x08,0x28,0x5F,0x00,0x00, \
-+    0x8F,0x9F,0x29,0x33,0x08,0x16,0x00,0x49,0x00,0x01, \
-+    0x1B,0xFF,0x00,0x01,0x1B,0xFF,0x08,0x07,0x00,0x02, \
-+    0x00,0x00,0x8D,0x80,0x53,0x9C,0x00,0x01,0x30,0x71, \
-+    0x00,0x55,0x00,0x01,0x28,0x0F,0x00,0x00,0x8D,0x00, \
-+    0x53,0xA4,0x00,0x01,0x30,0x71,0x00,0x55,0x00,0x01, \
-+    0x28,0x0F,0x00,0x00,0x83,0x8E,0x53,0xB9,0x00,0x00, \
-+    0x00,0x00,0x86,0x08,0x30,0x71,0x00,0x7B,0x03,0xB9, \
-+    0x33,0xB4,0x00,0xDA,0xFF,0xFF,0x00,0x0F,0x00,0x00, \
-+    0x00,0x00,0x00,0x00,0x86,0x09,0x01,0x03,0x00,0x7D, \
-+    0x03,0xB9,0x1B,0xC8,0x33,0xD1,0x00,0xF9,0x00,0x10, \
-+    0x00,0x00,0x00,0x00,0x00,0x00,0x28,0x7B,0x09,0x5F, \
-+    0x00,0x1A,0x00,0x00,0x09,0x4F,0x00,0x1A,0x00,0x00, \
-+    0x00,0x01,0x1B,0xFF,0x00,0x00,0x8C,0x00,0x53,0xF0, \
-+    0x00,0x01,0x34,0xF5,0x00,0xFB,0xFF,0xFF,0x00,0x7F, \
-+    0x00,0x00,0x00,0x00,0x2A,0x9F,0x00,0x00,0x93,0x8F, \
-+    0x28,0x49,0x00,0x00,0x97,0x8F,0x28,0x4B,0x34,0x61, \
-+    0x28,0x4D,0x34,0x71,0x28,0x4F,0x34,0xB7,0x00,0xF9, \
-+    0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x2B,0x97, \
-+    0x33,0xF1,0x00,0xF9,0x00,0x01,0x00,0x00,0x00,0x00, \
-+    0x00,0x00,0x28,0x7F,0x00,0x03,0x00,0x02,0x00,0x00, \
-+    0x00,0x01,0x1B,0xFF,0x00,0x01,0x1B,0xFF, \
-+}
-+#endif /* (DPAA_VERSION == 10) */
-+
-+/****************************/
-+/* Parser defines           */
-+/****************************/
-+#define FM_PCD_PRS_SW_TAIL_SIZE             4                   /**< Number of bytes that must be cleared at
-+                                                                             the end of the SW parser area */
-+
-+/* masks */
-+#define PRS_ERR_CAP                         0x80000000
-+#define PRS_ERR_TYPE_DOUBLE                 0x40000000
-+#define PRS_ERR_SINGLE_ECC_CNT_MASK         0x00FF0000
-+#define PRS_ERR_ADDR_MASK                   0x000001FF
-+
-+/* others */
-+#define PRS_MAX_CYCLE_LIMIT                 8191
-+#define PRS_SW_DATA                         0x00000800
-+#define PRS_REGS_OFFSET                     0x00000840
-+
-+#define GET_FM_PCD_PRS_PORT_ID(prsPortId,hardwarePortId) \
-+    prsPortId = (uint8_t)(hardwarePortId & 0x0f)
-+
-+#define GET_FM_PCD_INDEX_FLAG(bitMask, prsPortId)    \
-+    bitMask = 0x80000000>>prsPortId
-+
-+#endif /* __FM_PRS_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_replic.c
-@@ -0,0 +1,984 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_replic.c
-+
-+ @Description   FM frame replicator
-+*//***************************************************************************/
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "string_ext.h"
-+#include "debug_ext.h"
-+#include "fm_pcd_ext.h"
-+#include "fm_muram_ext.h"
-+#include "fm_common.h"
-+#include "fm_hc.h"
-+#include "fm_replic.h"
-+#include "fm_cc.h"
-+#include "list_ext.h"
-+
-+
-+/****************************************/
-+/*       static functions               */
-+/****************************************/
-+static uint8_t  GetMemberPosition(t_FmPcdFrmReplicGroup *p_ReplicGroup,
-+                                  uint32_t              memberIndex,
-+                                  bool                  isAddOperation)
-+{
-+    uint8_t     memberPosition;
-+    uint32_t    lastMemberIndex;
-+
-+    ASSERT_COND(p_ReplicGroup);
-+
-+    /* the last member index is different between add and remove operation -
-+    in case of remove - this is exactly the last member index
-+    in case of add - this is the last member index + 1 - e.g.
-+    if we have 4 members, the index of the actual last member is 3(because the
-+    index starts from 0) therefore in order to add a new member as the last
-+    member we shall use memberIndex = 4 and not 3
-+    */
-+    if (isAddOperation)
-+        lastMemberIndex = p_ReplicGroup->numOfEntries;
-+    else
-+        lastMemberIndex = p_ReplicGroup->numOfEntries-1;
-+
-+    /* last */
-+    if (memberIndex == lastMemberIndex)
-+        memberPosition = FRM_REPLIC_LAST_MEMBER_INDEX;
-+    else
-+    {
-+        /* first */
-+        if (memberIndex == 0)
-+            memberPosition = FRM_REPLIC_FIRST_MEMBER_INDEX;
-+        else
-+        {
-+            /* middle */
-+            ASSERT_COND(memberIndex < lastMemberIndex);
-+            memberPosition = FRM_REPLIC_MIDDLE_MEMBER_INDEX;
-+        }
-+    }
-+    return memberPosition;
-+}
-+
-+static t_Error MemberCheckParams(t_Handle                  h_FmPcd,
-+                                 t_FmPcdCcNextEngineParams *p_MemberParams)
-+{
-+    t_Error         err;
-+
-+
-+    if ((p_MemberParams->nextEngine != e_FM_PCD_DONE) &&
-+        (p_MemberParams->nextEngine != e_FM_PCD_KG)   &&
-+        (p_MemberParams->nextEngine != e_FM_PCD_PLCR))
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("Next engine of a member should be MatchTable(cc) or Done or Policer"));
-+
-+    /* check the regular parameters of the next engine */
-+    err = ValidateNextEngineParams(h_FmPcd, p_MemberParams, e_FM_PCD_CC_STATS_MODE_NONE);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, ("member next engine parameters"));
-+
-+    return E_OK;
-+}
-+
-+static t_Error CheckParams(t_Handle                     h_FmPcd,
-+                           t_FmPcdFrmReplicGroupParams *p_ReplicGroupParam)
-+{
-+    int             i;
-+    t_Error         err;
-+
-+    /* check that max num of entries is at least 2 */
-+    if (!IN_RANGE(2, p_ReplicGroupParam->maxNumOfEntries, FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES))
-+        RETURN_ERROR(MAJOR, E_NOT_IN_RANGE, ("maxNumOfEntries in the frame replicator parameters should be 2-%d",FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES));
-+
-+    /* check that number of entries is greater than zero */
-+    if (!p_ReplicGroupParam->numOfEntries)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("numOFEntries in the frame replicator group should be greater than zero"));
-+
-+    /* check that max num of entries is equal or greater than number of entries */
-+    if (p_ReplicGroupParam->maxNumOfEntries < p_ReplicGroupParam->numOfEntries)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("maxNumOfEntries should be equal or greater than numOfEntries"));
-+
-+    for (i=0; i<p_ReplicGroupParam->numOfEntries; i++)
-+    {
-+        err = MemberCheckParams(h_FmPcd, &p_ReplicGroupParam->nextEngineParams[i]);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, ("member check parameters"));
-+    }
-+    return E_OK;
-+}
-+
-+static t_FmPcdFrmReplicMember *GetAvailableMember(t_FmPcdFrmReplicGroup *p_ReplicGroup)
-+{
-+    t_FmPcdFrmReplicMember  *p_ReplicMember = NULL;
-+    t_List                  *p_Next;
-+
-+    if (!LIST_IsEmpty(&p_ReplicGroup->availableMembersList))
-+    {
-+        p_Next = LIST_FIRST(&p_ReplicGroup->availableMembersList);
-+        p_ReplicMember = LIST_OBJECT(p_Next, t_FmPcdFrmReplicMember, node);
-+        ASSERT_COND(p_ReplicMember);
-+        LIST_DelAndInit(p_Next);
-+    }
-+    return p_ReplicMember;
-+}
-+
-+static void PutAvailableMember(t_FmPcdFrmReplicGroup    *p_ReplicGroup,
-+                               t_FmPcdFrmReplicMember   *p_ReplicMember)
-+{
-+    LIST_AddToTail(&p_ReplicMember->node, &p_ReplicGroup->availableMembersList);
-+}
-+
-+static void AddMemberToList(t_FmPcdFrmReplicGroup   *p_ReplicGroup,
-+                            t_FmPcdFrmReplicMember  *p_CurrentMember,
-+                            t_List                  *p_ListHead)
-+{
-+    LIST_Add(&p_CurrentMember->node, p_ListHead);
-+
-+    p_ReplicGroup->numOfEntries++;
-+}
-+
-+static void RemoveMemberFromList(t_FmPcdFrmReplicGroup  *p_ReplicGroup,
-+                                 t_FmPcdFrmReplicMember *p_CurrentMember)
-+{
-+    ASSERT_COND(p_ReplicGroup->numOfEntries);
-+    LIST_DelAndInit(&p_CurrentMember->node);
-+    p_ReplicGroup->numOfEntries--;
-+}
-+
-+static void LinkSourceToMember(t_FmPcdFrmReplicGroup    *p_ReplicGroup,
-+                               t_AdOfTypeContLookup     *p_SourceTd,
-+                               t_FmPcdFrmReplicMember   *p_ReplicMember)
-+{
-+    t_FmPcd             *p_FmPcd;
-+
-+    ASSERT_COND(p_SourceTd);
-+    ASSERT_COND(p_ReplicMember);
-+    ASSERT_COND(p_ReplicGroup);
-+    ASSERT_COND(p_ReplicGroup->h_FmPcd);
-+
-+    /* Link the first member in the group to the source TD */
-+    p_FmPcd = p_ReplicGroup->h_FmPcd;
-+
-+    WRITE_UINT32(p_SourceTd->matchTblPtr,
-+        (uint32_t)(XX_VirtToPhys(p_ReplicMember->p_MemberAd) -
-+                        p_FmPcd->physicalMuramBase));
-+}
-+
-+static void LinkMemberToMember(t_FmPcdFrmReplicGroup    *p_ReplicGroup,
-+                               t_FmPcdFrmReplicMember   *p_CurrentMember,
-+                               t_FmPcdFrmReplicMember   *p_NextMember)
-+{
-+    t_AdOfTypeResult    *p_CurrReplicAd = (t_AdOfTypeResult*)p_CurrentMember->p_MemberAd;
-+    t_AdOfTypeResult    *p_NextReplicAd = NULL;
-+    t_FmPcd             *p_FmPcd;
-+    uint32_t            offset = 0;
-+
-+    /* Check if the next member exists or it's NULL (- means that this is the last member) */
-+    if (p_NextMember)
-+    {
-+        p_NextReplicAd = (t_AdOfTypeResult*)p_NextMember->p_MemberAd;
-+        p_FmPcd = p_ReplicGroup->h_FmPcd;
-+        offset = (XX_VirtToPhys(p_NextReplicAd) - (p_FmPcd->physicalMuramBase));
-+        offset = ((offset>>NEXT_FRM_REPLIC_ADDR_SHIFT)<< NEXT_FRM_REPLIC_MEMBER_INDEX_SHIFT);
-+    }
-+
-+    /* link the current AD to point to the AD of the next member */
-+    WRITE_UINT32(p_CurrReplicAd->res, offset);
-+}
-+
-+static t_Error ModifyDescriptor(t_FmPcdFrmReplicGroup   *p_ReplicGroup,
-+                                void                    *p_OldDescriptor,
-+                                void                    *p_NewDescriptor)
-+{
-+    t_Handle            h_Hc;
-+    t_Error             err;
-+    t_FmPcd             *p_FmPcd;
-+
-+    ASSERT_COND(p_ReplicGroup);
-+    ASSERT_COND(p_ReplicGroup->h_FmPcd);
-+    ASSERT_COND(p_OldDescriptor);
-+    ASSERT_COND(p_NewDescriptor);
-+
-+    p_FmPcd = p_ReplicGroup->h_FmPcd;
-+    h_Hc = FmPcdGetHcHandle(p_FmPcd);
-+    if (!h_Hc)
-+        RETURN_ERROR(MAJOR, E_INVALID_HANDLE, ("Host command"));
-+
-+    err = FmHcPcdCcDoDynamicChange(h_Hc,
-+                                   (uint32_t)(XX_VirtToPhys(p_OldDescriptor) - p_FmPcd->physicalMuramBase),
-+                                   (uint32_t)(XX_VirtToPhys(p_NewDescriptor) - p_FmPcd->physicalMuramBase));
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, ("Dynamic change host command"));
-+
-+    return E_OK;
-+}
-+
-+static void FillReplicAdOfTypeResult(void *p_ReplicAd, bool last)
-+{
-+    t_AdOfTypeResult    *p_CurrReplicAd = (t_AdOfTypeResult*)p_ReplicAd;
-+    uint32_t            tmp;
-+
-+    tmp = GET_UINT32(p_CurrReplicAd->plcrProfile);
-+    if (last)
-+        /* clear the NL bit in case it's the last member in the group*/
-+        WRITE_UINT32(p_CurrReplicAd->plcrProfile,(tmp & ~FRM_REPLIC_NL_BIT));
-+    else
-+        /* set the NL bit in case it's not the last member in the group */
-+        WRITE_UINT32(p_CurrReplicAd->plcrProfile, (tmp |FRM_REPLIC_NL_BIT));
-+
-+    /* set FR bit in the action descriptor */
-+    tmp = GET_UINT32(p_CurrReplicAd->nia);
-+    WRITE_UINT32(p_CurrReplicAd->nia,
-+        (tmp | FRM_REPLIC_FR_BIT | FM_PCD_AD_RESULT_EXTENDED_MODE ));
-+}
-+
-+static void BuildSourceTd(void *p_Ad)
-+{
-+    t_AdOfTypeContLookup    *p_SourceTd;
-+
-+    ASSERT_COND(p_Ad);
-+
-+    p_SourceTd = (t_AdOfTypeContLookup *)p_Ad;
-+
-+    IOMemSet32((uint8_t*)p_SourceTd, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    /* initialize the source table descriptor */
-+    WRITE_UINT32(p_SourceTd->ccAdBase,     FM_PCD_AD_CONT_LOOKUP_TYPE);
-+    WRITE_UINT32(p_SourceTd->pcAndOffsets, FRM_REPLIC_SOURCE_TD_OPCODE);
-+}
-+
-+static t_Error BuildShadowAndModifyDescriptor(t_FmPcdFrmReplicGroup   *p_ReplicGroup,
-+                                              t_FmPcdFrmReplicMember  *p_NextMember,
-+                                              t_FmPcdFrmReplicMember  *p_CurrentMember,
-+                                              bool                    sourceDescriptor,
-+                                              bool                    last)
-+{
-+    t_FmPcd                 *p_FmPcd;
-+    t_FmPcdFrmReplicMember  shadowMember;
-+    t_Error                 err;
-+
-+    ASSERT_COND(p_ReplicGroup);
-+    ASSERT_COND(p_ReplicGroup->h_FmPcd);
-+
-+    p_FmPcd = p_ReplicGroup->h_FmPcd;
-+    ASSERT_COND(p_FmPcd->p_CcShadow);
-+
-+    if (!TRY_LOCK(p_FmPcd->h_ShadowSpinlock, &p_FmPcd->shadowLock))
-+        return ERROR_CODE(E_BUSY);
-+
-+    if (sourceDescriptor)
-+    {
-+        BuildSourceTd(p_FmPcd->p_CcShadow);
-+        LinkSourceToMember(p_ReplicGroup, p_FmPcd->p_CcShadow, p_NextMember);
-+
-+        /* Modify the source table descriptor according to the prepared shadow descriptor */
-+        err = ModifyDescriptor(p_ReplicGroup,
-+                               p_ReplicGroup->p_SourceTd,
-+                               p_FmPcd->p_CcShadow/* new prepared source td */);
-+
-+        RELEASE_LOCK(p_FmPcd->shadowLock);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, ("Modify source Descriptor in BuildShadowAndModifyDescriptor"));
-+
-+    }
-+    else
-+    {
-+        IO2IOCpy32(p_FmPcd->p_CcShadow,
-+                   p_CurrentMember->p_MemberAd,
-+                   FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+        /* update the last bit in the shadow ad */
-+        FillReplicAdOfTypeResult(p_FmPcd->p_CcShadow, last);
-+
-+        shadowMember.p_MemberAd = p_FmPcd->p_CcShadow;
-+
-+        /* update the next FR member index */
-+        LinkMemberToMember(p_ReplicGroup, &shadowMember, p_NextMember);
-+
-+        /* Modify the next member according to the prepared shadow descriptor */
-+        err = ModifyDescriptor(p_ReplicGroup,
-+                               p_CurrentMember->p_MemberAd,
-+                               p_FmPcd->p_CcShadow);
-+
-+        RELEASE_LOCK(p_FmPcd->shadowLock);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, ("Modify Descriptor in BuildShadowAndModifyDescriptor"));
-+    }
-+
-+
-+    return E_OK;
-+}
-+
-+static t_FmPcdFrmReplicMember* GetMemberByIndex(t_FmPcdFrmReplicGroup   *p_ReplicGroup,
-+                                                uint16_t                memberIndex)
-+{
-+    int                     i=0;
-+    t_List                  *p_Pos;
-+    t_FmPcdFrmReplicMember  *p_Member = NULL;
-+
-+    LIST_FOR_EACH(p_Pos, &p_ReplicGroup->membersList)
-+    {
-+        if (i == memberIndex)
-+        {
-+            p_Member = LIST_OBJECT(p_Pos, t_FmPcdFrmReplicMember, node);
-+            return p_Member;
-+        }
-+        i++;
-+    }
-+    return p_Member;
-+}
-+
-+static t_Error AllocMember(t_FmPcdFrmReplicGroup *p_ReplicGroup)
-+{
-+    t_FmPcdFrmReplicMember  *p_CurrentMember;
-+    t_Handle                h_Muram;
-+
-+    ASSERT_COND(p_ReplicGroup);
-+
-+    h_Muram = FmPcdGetMuramHandle(p_ReplicGroup->h_FmPcd);
-+    ASSERT_COND(h_Muram);
-+
-+    /* Initialize an internal structure of a member to add to the available members list */
-+    p_CurrentMember = (t_FmPcdFrmReplicMember *)XX_Malloc(sizeof(t_FmPcdFrmReplicMember));
-+    if (!p_CurrentMember)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Frame replicator member"));
-+
-+    memset(p_CurrentMember, 0 ,sizeof(t_FmPcdFrmReplicMember));
-+
-+    /* Allocate the member AD */
-+    p_CurrentMember->p_MemberAd =
-+        (t_AdOfTypeResult*)FM_MURAM_AllocMem(h_Muram,
-+                                             FM_PCD_CC_AD_ENTRY_SIZE,
-+                                             FM_PCD_CC_AD_TABLE_ALIGN);
-+    if (!p_CurrentMember->p_MemberAd)
-+    {
-+        XX_Free(p_CurrentMember);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("member AD table"));
-+    }
-+    IOMemSet32((uint8_t*)p_CurrentMember->p_MemberAd, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    /* Add the new member to the available members list */
-+    LIST_AddToTail(&p_CurrentMember->node, &(p_ReplicGroup->availableMembersList));
-+
-+    return E_OK;
-+}
-+
-+static t_FmPcdFrmReplicMember* InitMember(t_FmPcdFrmReplicGroup     *p_ReplicGroup,
-+                                          t_FmPcdCcNextEngineParams *p_MemberParams,
-+                                          bool                      last)
-+{
-+    t_FmPcdFrmReplicMember  *p_CurrentMember = NULL;
-+
-+    ASSERT_COND(p_ReplicGroup);
-+
-+    /* Get an available member from the internal members list */
-+    p_CurrentMember = GetAvailableMember(p_ReplicGroup);
-+    if (!p_CurrentMember)
-+    {
-+        REPORT_ERROR(MAJOR, E_NOT_FOUND, ("Available member"));
-+        return NULL;
-+    }
-+    p_CurrentMember->h_Manip = NULL;
-+
-+    /* clear the Ad of the new member */
-+    IOMemSet32((uint8_t*)p_CurrentMember->p_MemberAd, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+    INIT_LIST(&p_CurrentMember->node);
-+
-+    /* Initialize the Ad of the member */
-+    NextStepAd(p_CurrentMember->p_MemberAd,
-+               NULL,
-+               p_MemberParams,
-+               p_ReplicGroup->h_FmPcd);
-+
-+    /* save Manip handle (for free needs) */
-+    if (p_MemberParams->h_Manip)
-+        p_CurrentMember->h_Manip = p_MemberParams->h_Manip;
-+
-+    /* Initialize the relevant frame replicator fields in the AD */
-+    FillReplicAdOfTypeResult(p_CurrentMember->p_MemberAd, last);
-+
-+    return p_CurrentMember;
-+}
-+
-+static void FreeMember(t_FmPcdFrmReplicGroup    *p_ReplicGroup,
-+                       t_FmPcdFrmReplicMember   *p_Member)
-+{
-+    /* Note: Can't free the member AD just returns the member to the available
-+       member list - therefore only memset the AD */
-+
-+    /* zero the AD */
-+    IOMemSet32(p_Member->p_MemberAd, 0, FM_PCD_CC_AD_ENTRY_SIZE);
-+
-+
-+    /* return the member to the available members list */
-+    PutAvailableMember(p_ReplicGroup, p_Member);
-+}
-+
-+static t_Error RemoveMember(t_FmPcdFrmReplicGroup   *p_ReplicGroup,
-+                            uint16_t                memberIndex)
-+{
-+    t_FmPcd                 *p_FmPcd = NULL;
-+    t_FmPcdFrmReplicMember  *p_CurrentMember = NULL, *p_PreviousMember = NULL, *p_NextMember = NULL;
-+    t_Error                 err;
-+    uint8_t                 memberPosition;
-+
-+    p_FmPcd         = p_ReplicGroup->h_FmPcd;
-+    ASSERT_COND(p_FmPcd);
-+    UNUSED(p_FmPcd);
-+
-+    p_CurrentMember = GetMemberByIndex(p_ReplicGroup, memberIndex);
-+    ASSERT_COND(p_CurrentMember);
-+
-+    /* determine the member position in the group */
-+    memberPosition = GetMemberPosition(p_ReplicGroup,
-+                                       memberIndex,
-+                                       FALSE/*remove operation*/);
-+
-+    switch (memberPosition)
-+    {
-+        case FRM_REPLIC_FIRST_MEMBER_INDEX:
-+            p_NextMember = GetMemberByIndex(p_ReplicGroup, (uint16_t)(memberIndex+1));
-+            ASSERT_COND(p_NextMember);
-+
-+            /* update the source td itself by using a host command */
-+            err = BuildShadowAndModifyDescriptor(p_ReplicGroup,
-+                                                 p_NextMember,
-+                                                 NULL,
-+                                                 TRUE/*sourceDescriptor*/,
-+                                                 FALSE/*last*/);
-+            break;
-+
-+        case FRM_REPLIC_MIDDLE_MEMBER_INDEX:
-+            p_PreviousMember = GetMemberByIndex(p_ReplicGroup, (uint16_t)(memberIndex-1));
-+            ASSERT_COND(p_PreviousMember);
-+
-+            p_NextMember = GetMemberByIndex(p_ReplicGroup, (uint16_t)(memberIndex+1));
-+            ASSERT_COND(p_NextMember);
-+
-+            err = BuildShadowAndModifyDescriptor(p_ReplicGroup,
-+                                                 p_NextMember,
-+                                                 p_PreviousMember,
-+                                                 FALSE/*sourceDescriptor*/,
-+                                                 FALSE/*last*/);
-+
-+            break;
-+
-+        case FRM_REPLIC_LAST_MEMBER_INDEX:
-+            p_PreviousMember = GetMemberByIndex(p_ReplicGroup, (uint16_t)(memberIndex-1));
-+            ASSERT_COND(p_PreviousMember);
-+
-+            err = BuildShadowAndModifyDescriptor(p_ReplicGroup,
-+                                                 NULL,
-+                                                 p_PreviousMember,
-+                                                 FALSE/*sourceDescriptor*/,
-+                                                 TRUE/*last*/);
-+            break;
-+
-+        default:
-+            RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("member position in remove member"));
-+    }
-+
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    if (p_CurrentMember->h_Manip)
-+    {
-+        FmPcdManipUpdateOwner(p_CurrentMember->h_Manip, FALSE);
-+        p_CurrentMember->h_Manip = NULL;
-+    }
-+
-+    /* remove the member from the driver internal members list */
-+    RemoveMemberFromList(p_ReplicGroup, p_CurrentMember);
-+
-+    /* return the member to the available members list */
-+    FreeMember(p_ReplicGroup, p_CurrentMember);
-+
-+    return E_OK;
-+}
-+
-+static void DeleteGroup(t_FmPcdFrmReplicGroup *p_ReplicGroup)
-+{
-+    int                     i, j;
-+    t_Handle                h_Muram;
-+    t_FmPcdFrmReplicMember  *p_Member, *p_CurrentMember;
-+
-+    if (p_ReplicGroup)
-+    {
-+        ASSERT_COND(p_ReplicGroup->h_FmPcd);
-+        h_Muram = FmPcdGetMuramHandle(p_ReplicGroup->h_FmPcd);
-+        ASSERT_COND(h_Muram);
-+
-+        /* free the source table descriptor */
-+        if (p_ReplicGroup->p_SourceTd)
-+        {
-+            FM_MURAM_FreeMem(h_Muram, p_ReplicGroup->p_SourceTd);
-+            p_ReplicGroup->p_SourceTd = NULL;
-+        }
-+
-+        /* Remove all members from the members linked list (hw and sw) and
-+           return the members to the available members list */
-+        if (p_ReplicGroup->numOfEntries)
-+        {
-+            j = p_ReplicGroup->numOfEntries-1;
-+
-+            /* manually removal of the member because there are no owners of
-+               this group */
-+            for (i=j; i>=0; i--)
-+            {
-+                p_CurrentMember = GetMemberByIndex(p_ReplicGroup, (uint16_t)i/*memberIndex*/);
-+                ASSERT_COND(p_CurrentMember);
-+
-+                if (p_CurrentMember->h_Manip)
-+                {
-+                    FmPcdManipUpdateOwner(p_CurrentMember->h_Manip, FALSE);
-+                    p_CurrentMember->h_Manip = NULL;
-+                }
-+
-+                /* remove the member from the internal driver members list */
-+                RemoveMemberFromList(p_ReplicGroup, p_CurrentMember);
-+
-+                /* return the member to the available members list */
-+                FreeMember(p_ReplicGroup, p_CurrentMember);
-+            }
-+        }
-+
-+        /* Free members AD */
-+        for (i=0; i<p_ReplicGroup->maxNumOfEntries; i++)
-+        {
-+            p_Member = GetAvailableMember(p_ReplicGroup);
-+            ASSERT_COND(p_Member);
-+            if (p_Member->p_MemberAd)
-+            {
-+                FM_MURAM_FreeMem(h_Muram, p_Member->p_MemberAd);
-+                p_Member->p_MemberAd = NULL;
-+            }
-+            XX_Free(p_Member);
-+        }
-+
-+        /* release the group lock */
-+        if (p_ReplicGroup->p_Lock)
-+            FmPcdReleaseLock(p_ReplicGroup->h_FmPcd, p_ReplicGroup->p_Lock);
-+
-+        /* free the replicator group */
-+        XX_Free(p_ReplicGroup);
-+    }
-+}
-+
-+
-+/*****************************************************************************/
-+/*              Inter-module API routines                                    */
-+/*****************************************************************************/
-+
-+/* NOTE: the inter-module routines are locked by cc in case of using them */
-+void * FrmReplicGroupGetSourceTableDescriptor(t_Handle h_ReplicGroup)
-+{
-+    t_FmPcdFrmReplicGroup   *p_ReplicGroup = (t_FmPcdFrmReplicGroup *)h_ReplicGroup;
-+    ASSERT_COND(p_ReplicGroup);
-+
-+    return (p_ReplicGroup->p_SourceTd);
-+}
-+
-+void FrmReplicGroupUpdateAd(t_Handle  h_ReplicGroup,
-+                            void      *p_Ad,
-+                            t_Handle  *h_AdNew)
-+{
-+    t_FmPcdFrmReplicGroup   *p_ReplicGroup = (t_FmPcdFrmReplicGroup *)h_ReplicGroup;
-+    t_AdOfTypeResult    *p_AdResult = (t_AdOfTypeResult*)p_Ad;
-+    t_FmPcd             *p_FmPcd;
-+
-+    ASSERT_COND(p_ReplicGroup);
-+    p_FmPcd = p_ReplicGroup->h_FmPcd;
-+
-+    /* build a bypass ad */
-+    WRITE_UINT32(p_AdResult->fqid, FM_PCD_AD_BYPASS_TYPE |
-+        (uint32_t)((XX_VirtToPhys(p_ReplicGroup->p_SourceTd)) - p_FmPcd->physicalMuramBase));
-+
-+    *h_AdNew = NULL;
-+}
-+
-+void  FrmReplicGroupUpdateOwner(t_Handle                   h_ReplicGroup,
-+                                bool                       add)
-+{
-+    t_FmPcdFrmReplicGroup   *p_ReplicGroup = (t_FmPcdFrmReplicGroup *)h_ReplicGroup;
-+    ASSERT_COND(p_ReplicGroup);
-+
-+    /* update the group owner counter */
-+    if (add)
-+        p_ReplicGroup->owners++;
-+    else
-+    {
-+        ASSERT_COND(p_ReplicGroup->owners);
-+        p_ReplicGroup->owners--;
-+    }
-+}
-+
-+t_Error FrmReplicGroupTryLock(t_Handle h_ReplicGroup)
-+{
-+    t_FmPcdFrmReplicGroup *p_ReplicGroup = (t_FmPcdFrmReplicGroup *)h_ReplicGroup;
-+
-+    ASSERT_COND(h_ReplicGroup);
-+
-+    if (FmPcdLockTryLock(p_ReplicGroup->p_Lock))
-+        return E_OK;
-+
-+    return ERROR_CODE(E_BUSY);
-+}
-+
-+void FrmReplicGroupUnlock(t_Handle h_ReplicGroup)
-+{
-+    t_FmPcdFrmReplicGroup *p_ReplicGroup = (t_FmPcdFrmReplicGroup *)h_ReplicGroup;
-+
-+    ASSERT_COND(h_ReplicGroup);
-+
-+    FmPcdLockUnlock(p_ReplicGroup->p_Lock);
-+}
-+/*********************** End of inter-module routines ************************/
-+
-+
-+/****************************************/
-+/*       API Init unit functions        */
-+/****************************************/
-+t_Handle FM_PCD_FrmReplicSetGroup(t_Handle                    h_FmPcd,
-+                                  t_FmPcdFrmReplicGroupParams *p_ReplicGroupParam)
-+{
-+    t_FmPcdFrmReplicGroup       *p_ReplicGroup;
-+    t_FmPcdFrmReplicMember      *p_CurrentMember, *p_NextMember = NULL;
-+    int                         i;
-+    t_Error                     err;
-+    bool                        last = FALSE;
-+    t_Handle                    h_Muram;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmPcd, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(p_ReplicGroupParam, E_INVALID_HANDLE, NULL);
-+
-+    if (!FmPcdIsAdvancedOffloadSupported(h_FmPcd))
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Advanced-offload must be enabled"));
-+        return NULL;
-+    }
-+
-+    err = CheckParams(h_FmPcd, p_ReplicGroupParam);
-+    if (err)
-+    {
-+        REPORT_ERROR(MAJOR, err, (NO_MSG));
-+        return NULL;
-+    }
-+
-+    p_ReplicGroup = (t_FmPcdFrmReplicGroup*)XX_Malloc(sizeof(t_FmPcdFrmReplicGroup));
-+    if (!p_ReplicGroup)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("No memory"));
-+        return NULL;
-+    }
-+    memset(p_ReplicGroup, 0, sizeof(t_FmPcdFrmReplicGroup));
-+
-+    /* initialize lists for internal driver use */
-+    INIT_LIST(&p_ReplicGroup->availableMembersList);
-+    INIT_LIST(&p_ReplicGroup->membersList);
-+
-+    p_ReplicGroup->h_FmPcd = h_FmPcd;
-+
-+    h_Muram = FmPcdGetMuramHandle(p_ReplicGroup->h_FmPcd);
-+    ASSERT_COND(h_Muram);
-+
-+    /* initialize the group lock */
-+    p_ReplicGroup->p_Lock = FmPcdAcquireLock(p_ReplicGroup->h_FmPcd);
-+    if (!p_ReplicGroup->p_Lock)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("Replic group lock"));
-+        DeleteGroup(p_ReplicGroup);
-+        return NULL;
-+    }
-+
-+    /* Allocate the frame replicator source table descriptor */
-+    p_ReplicGroup->p_SourceTd =
-+        (t_Handle)FM_MURAM_AllocMem(h_Muram,
-+                                    FM_PCD_CC_AD_ENTRY_SIZE,
-+                                    FM_PCD_CC_AD_TABLE_ALIGN);
-+    if (!p_ReplicGroup->p_SourceTd)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("frame replicator source table descriptor"));
-+        DeleteGroup(p_ReplicGroup);
-+        return NULL;
-+    }
-+
-+    /* update the shadow size - required for the host commands */
-+    err = FmPcdUpdateCcShadow(p_ReplicGroup->h_FmPcd,
-+                              FM_PCD_CC_AD_ENTRY_SIZE,
-+                              FM_PCD_CC_AD_TABLE_ALIGN);
-+    if (err)
-+    {
-+        REPORT_ERROR(MAJOR, err, ("Update CC shadow"));
-+        DeleteGroup(p_ReplicGroup);
-+        return NULL;
-+    }
-+
-+    p_ReplicGroup->maxNumOfEntries  = p_ReplicGroupParam->maxNumOfEntries;
-+
-+    /* Allocate the maximal number of members ADs and Statistics AD for the group
-+       It prevents allocation of Muram in run-time */
-+    for (i=0; i<p_ReplicGroup->maxNumOfEntries; i++)
-+    {
-+        err = AllocMember(p_ReplicGroup);
-+        if (err)
-+        {
-+            REPORT_ERROR(MAJOR, err, ("allocate a new member"));
-+            DeleteGroup(p_ReplicGroup);
-+            return NULL;
-+        }
-+    }
-+
-+    /* Initialize the members linked lists:
-+      (hw - the one that is used by the FMan controller and
-+       sw - the one that is managed by the driver internally) */
-+    for (i=(p_ReplicGroupParam->numOfEntries-1); i>=0; i--)
-+    {
-+        /* check if this is the last member in the group */
-+        if (i == (p_ReplicGroupParam->numOfEntries-1))
-+            last = TRUE;
-+        else
-+            last = FALSE;
-+
-+        /* Initialize a new member */
-+        p_CurrentMember = InitMember(p_ReplicGroup,
-+                                     &(p_ReplicGroupParam->nextEngineParams[i]),
-+                                     last);
-+        if (!p_CurrentMember)
-+        {
-+            REPORT_ERROR(MAJOR, E_INVALID_HANDLE, ("No available member"));
-+            DeleteGroup(p_ReplicGroup);
-+            return NULL;
-+        }
-+
-+        /* Build the members group - link two consecutive members in the hw linked list */
-+        LinkMemberToMember(p_ReplicGroup, p_CurrentMember, p_NextMember);
-+
-+        /* update the driver internal members list to be compatible to the hw members linked list */
-+        AddMemberToList(p_ReplicGroup, p_CurrentMember, &p_ReplicGroup->membersList);
-+
-+        p_NextMember = p_CurrentMember;
-+    }
-+
-+    /* initialize the source table descriptor */
-+    BuildSourceTd(p_ReplicGroup->p_SourceTd);
-+
-+    /* link the source table descriptor to point to the first member in the group */
-+    LinkSourceToMember(p_ReplicGroup, p_ReplicGroup->p_SourceTd, p_NextMember);
-+
-+    return p_ReplicGroup;
-+}
-+
-+t_Error FM_PCD_FrmReplicDeleteGroup(t_Handle h_ReplicGroup)
-+{
-+    t_FmPcdFrmReplicGroup   *p_ReplicGroup = (t_FmPcdFrmReplicGroup *)h_ReplicGroup;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_ReplicGroup, E_INVALID_HANDLE);
-+
-+    if (p_ReplicGroup->owners)
-+        RETURN_ERROR(MAJOR,
-+                     E_INVALID_STATE,
-+                     ("the group has owners and can't be deleted"));
-+
-+    DeleteGroup(p_ReplicGroup);
-+
-+    return E_OK;
-+}
-+
-+
-+/*****************************************************************************/
-+/*       API Run-time Frame replicator Control unit functions                */
-+/*****************************************************************************/
-+t_Error FM_PCD_FrmReplicAddMember(t_Handle                  h_ReplicGroup,
-+                                  uint16_t                  memberIndex,
-+                                  t_FmPcdCcNextEngineParams *p_MemberParams)
-+{
-+    t_FmPcdFrmReplicGroup       *p_ReplicGroup = (t_FmPcdFrmReplicGroup*) h_ReplicGroup;
-+    t_FmPcdFrmReplicMember      *p_NewMember, *p_CurrentMember = NULL, *p_PreviousMember = NULL;
-+    t_Error                     err;
-+    uint8_t                     memberPosition;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_ReplicGroup, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_MemberParams, E_INVALID_HANDLE);
-+
-+    /* group lock */
-+    err = FrmReplicGroupTryLock(p_ReplicGroup);
-+    if (GET_ERROR_TYPE(err) == E_BUSY)
-+        return ERROR_CODE(E_BUSY);
-+
-+    if (memberIndex > p_ReplicGroup->numOfEntries)
-+    {
-+        /* unlock */
-+        FrmReplicGroupUnlock(p_ReplicGroup);
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION,
-+                     ("memberIndex is greater than the members in the list"));
-+    }
-+
-+    if (memberIndex >= p_ReplicGroup->maxNumOfEntries)
-+    {
-+        /* unlock */
-+        FrmReplicGroupUnlock(p_ReplicGroup);
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("memberIndex is greater than the allowed number of members in the group"));
-+    }
-+
-+    if ((p_ReplicGroup->numOfEntries + 1) > FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES)
-+    {
-+        /* unlock */
-+        FrmReplicGroupUnlock(p_ReplicGroup);
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("numOfEntries with new entry can not be larger than %d\n",
-+                      FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES));
-+    }
-+
-+    err = MemberCheckParams(p_ReplicGroup->h_FmPcd, p_MemberParams);
-+    if (err)
-+    {
-+        /* unlock */
-+        FrmReplicGroupUnlock(p_ReplicGroup);
-+        RETURN_ERROR(MAJOR, err, ("member check parameters in add operation"));
-+    }
-+    /* determine the member position in the group */
-+    memberPosition = GetMemberPosition(p_ReplicGroup,
-+                                       memberIndex,
-+                                       TRUE/* add operation */);
-+
-+    /* Initialize a new member */
-+    p_NewMember = InitMember(p_ReplicGroup,
-+                             p_MemberParams,
-+                             (memberPosition == FRM_REPLIC_LAST_MEMBER_INDEX ? TRUE : FALSE));
-+    if (!p_NewMember)
-+    {
-+        /* unlock */
-+        FrmReplicGroupUnlock(p_ReplicGroup);
-+        RETURN_ERROR(MAJOR, E_INVALID_HANDLE, ("No available member"));
-+    }
-+
-+    switch (memberPosition)
-+    {
-+        case FRM_REPLIC_FIRST_MEMBER_INDEX:
-+            p_CurrentMember = GetMemberByIndex(p_ReplicGroup, memberIndex);
-+            ASSERT_COND(p_CurrentMember);
-+
-+            LinkMemberToMember(p_ReplicGroup, p_NewMember, p_CurrentMember);
-+
-+            /* update the internal group source TD */
-+            LinkSourceToMember(p_ReplicGroup,
-+                               p_ReplicGroup->p_SourceTd,
-+                               p_NewMember);
-+
-+            /* add member to the internal sw member list */
-+            AddMemberToList(p_ReplicGroup,
-+                            p_NewMember,
-+                            &p_ReplicGroup->membersList);
-+            break;
-+
-+        case FRM_REPLIC_MIDDLE_MEMBER_INDEX:
-+            p_CurrentMember = GetMemberByIndex(p_ReplicGroup, memberIndex);
-+            ASSERT_COND(p_CurrentMember);
-+
-+            p_PreviousMember = GetMemberByIndex(p_ReplicGroup, (uint16_t)(memberIndex-1));
-+            ASSERT_COND(p_PreviousMember);
-+
-+            LinkMemberToMember(p_ReplicGroup, p_NewMember, p_CurrentMember);
-+            LinkMemberToMember(p_ReplicGroup, p_PreviousMember, p_NewMember);
-+
-+            AddMemberToList(p_ReplicGroup, p_NewMember, &p_PreviousMember->node);
-+            break;
-+
-+        case FRM_REPLIC_LAST_MEMBER_INDEX:
-+            p_PreviousMember = GetMemberByIndex(p_ReplicGroup, (uint16_t)(memberIndex-1));
-+            ASSERT_COND(p_PreviousMember);
-+
-+            LinkMemberToMember(p_ReplicGroup, p_PreviousMember, p_NewMember);
-+            FillReplicAdOfTypeResult(p_PreviousMember->p_MemberAd, FALSE/*last*/);
-+
-+            /* add the new member to the internal sw member list */
-+            AddMemberToList(p_ReplicGroup, p_NewMember, &p_PreviousMember->node);
-+           break;
-+
-+        default:
-+            /* unlock */
-+            FrmReplicGroupUnlock(p_ReplicGroup);
-+            RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("member position in add member"));
-+
-+    }
-+
-+    /* unlock */
-+    FrmReplicGroupUnlock(p_ReplicGroup);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PCD_FrmReplicRemoveMember(t_Handle   h_ReplicGroup,
-+                                     uint16_t   memberIndex)
-+{
-+    t_FmPcdFrmReplicGroup   *p_ReplicGroup = (t_FmPcdFrmReplicGroup*) h_ReplicGroup;
-+    t_Error                 err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_ReplicGroup, E_INVALID_HANDLE);
-+
-+    /* lock */
-+    err = FrmReplicGroupTryLock(p_ReplicGroup);
-+    if (GET_ERROR_TYPE(err) == E_BUSY)
-+        return ERROR_CODE(E_BUSY);
-+
-+    if (memberIndex >= p_ReplicGroup->numOfEntries)
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("member index to remove"));
-+
-+    /* Design decision: group must contain at least one member
-+       No possibility to remove the last member from the group */
-+    if (p_ReplicGroup->numOfEntries == 1)
-+        RETURN_ERROR(MAJOR, E_CONFLICT, ("Can't remove the last member. At least one member should be related to a group."));
-+
-+    err = RemoveMember(p_ReplicGroup, memberIndex);
-+
-+    /* unlock */
-+    FrmReplicGroupUnlock(p_ReplicGroup);
-+
-+    switch (GET_ERROR_TYPE(err))
-+    {
-+        case E_OK:
-+            return E_OK;
-+
-+        case E_BUSY:
-+            DBG(TRACE, ("E_BUSY error"));
-+            return ERROR_CODE(E_BUSY);
-+
-+        default:
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+}
-+
-+/*********************** End of API routines ************************/
-+
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_replic.h
-@@ -0,0 +1,101 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_replic.h
-+
-+ @Description   FM frame replicator
-+*//***************************************************************************/
-+#ifndef __FM_REPLIC_H
-+#define __FM_REPLIC_H
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+
-+
-+#define FRM_REPLIC_SOURCE_TD_OPCODE           0x75
-+#define NEXT_FRM_REPLIC_ADDR_SHIFT            4
-+#define NEXT_FRM_REPLIC_MEMBER_INDEX_SHIFT    16
-+#define FRM_REPLIC_FR_BIT                     0x08000000
-+#define FRM_REPLIC_NL_BIT                     0x10000000
-+#define FRM_REPLIC_INVALID_MEMBER_INDEX       0xffff
-+#define FRM_REPLIC_FIRST_MEMBER_INDEX         0
-+
-+#define FRM_REPLIC_MIDDLE_MEMBER_INDEX        1
-+#define FRM_REPLIC_LAST_MEMBER_INDEX          2
-+
-+#define SOURCE_TD_ITSELF_OPTION               0x01
-+#define SOURCE_TD_COPY_OPTION                 0x02
-+#define SOURCE_TD_ITSELF_AND_COPY_OPTION      SOURCE_TD_ITSELF_OPTION | SOURCE_TD_COPY_OPTION
-+#define SOURCE_TD_NONE                        0x04
-+
-+/*typedef enum e_SourceTdOption
-+{
-+    e_SOURCE_TD_NONE = 0,
-+    e_SOURCE_TD_ITSELF_OPTION = 1,
-+    e_SOURCE_TD_COPY_OPTION = 2,
-+    e_SOURCE_TD_ITSELF_AND_COPY_OPTION = e_SOURCE_TD_ITSELF_OPTION | e_SOURCE_TD_COPY_OPTION
-+} e_SourceTdOption;
-+*/
-+
-+typedef struct
-+{
-+    volatile uint32_t type;
-+    volatile uint32_t frGroupPointer;
-+    volatile uint32_t operationCode;
-+    volatile uint32_t reserved;
-+} t_FrmReplicGroupSourceAd;
-+
-+typedef struct t_FmPcdFrmReplicMember
-+{
-+    void                        *p_MemberAd;    /**< pointer to the member AD */
-+    void                        *p_StatisticsAd;/**< pointer to the statistics AD of the member */
-+    t_Handle                    h_Manip;        /**< manip handle - need for free routines */
-+    t_List                      node;
-+} t_FmPcdFrmReplicMember;
-+
-+typedef struct t_FmPcdFrmReplicGroup
-+{
-+    t_Handle                    h_FmPcd;
-+
-+    uint8_t                     maxNumOfEntries;/**< maximal number of members in the group */
-+    uint8_t                     numOfEntries;   /**< actual number of members in the group */
-+    uint16_t                    owners;         /**< how many keys share this frame replicator group */
-+    void                        *p_SourceTd;     /**< pointer to the frame replicator source table descriptor */
-+    t_List                      membersList;    /**< the members list - should reflect the order of the members as in the hw linked list*/
-+    t_List                      availableMembersList;/**< list of all the available members in the group */
-+    t_FmPcdLock                 *p_Lock;
-+} t_FmPcdFrmReplicGroup;
-+
-+
-+#endif /* __FM_REPLIC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fman_kg.c
-@@ -0,0 +1,888 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "fsl_fman_kg.h"
-+
-+/****************************************/
-+/*       static functions               */
-+/****************************************/
-+
-+
-+static uint32_t build_ar_bind_scheme(uint8_t hwport_id, bool write)
-+{
-+	uint32_t rw;
-+
-+	rw = write ? (uint32_t)FM_KG_KGAR_WRITE : (uint32_t)FM_KG_KGAR_READ;
-+
-+	return (uint32_t)(FM_KG_KGAR_GO |
-+			rw |
-+			FM_PCD_KG_KGAR_SEL_PORT_ENTRY |
-+			hwport_id |
-+			FM_PCD_KG_KGAR_SEL_PORT_WSEL_SP);
-+}
-+
-+static void clear_pe_all_scheme(struct fman_kg_regs *regs, uint8_t hwport_id)
-+{
-+	uint32_t ar;
-+
-+	fman_kg_write_sp(regs, 0xffffffff, 0);
-+
-+	ar = build_ar_bind_scheme(hwport_id, TRUE);
-+	fman_kg_write_ar_wait(regs, ar);
-+}
-+
-+static uint32_t build_ar_bind_cls_plan(uint8_t hwport_id, bool write)
-+{
-+	uint32_t rw;
-+
-+	rw = write ? (uint32_t)FM_KG_KGAR_WRITE : (uint32_t)FM_KG_KGAR_READ;
-+
-+	return (uint32_t)(FM_KG_KGAR_GO |
-+			rw |
-+			FM_PCD_KG_KGAR_SEL_PORT_ENTRY |
-+			hwport_id |
-+			FM_PCD_KG_KGAR_SEL_PORT_WSEL_CPP);
-+}
-+
-+static void clear_pe_all_cls_plan(struct fman_kg_regs *regs, uint8_t hwport_id)
-+{
-+	uint32_t ar;
-+
-+	fman_kg_write_cpp(regs, 0);
-+
-+	ar = build_ar_bind_cls_plan(hwport_id, TRUE);
-+	fman_kg_write_ar_wait(regs, ar);
-+}
-+
-+static uint8_t get_gen_ht_code(enum fman_kg_gen_extract_src src,
-+				bool no_validation,
-+				uint8_t *offset)
-+{
-+	int	code;
-+
-+	switch (src) {
-+	case E_FMAN_KG_GEN_EXTRACT_ETH:
-+		code = no_validation ? 0x73 : 0x3;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_ETYPE:
-+		code = no_validation ? 0x77 : 0x7;
-+		break;
-+ 
-+	case E_FMAN_KG_GEN_EXTRACT_SNAP:
-+		code = no_validation ? 0x74 : 0x4;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_VLAN_TCI_1:
-+		code = no_validation ? 0x75 : 0x5;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_VLAN_TCI_N:
-+		code = no_validation ? 0x76 : 0x6;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_PPPoE:
-+		code = no_validation ? 0x78 : 0x8;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_MPLS_1:
-+		code = no_validation ? 0x79 : 0x9;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_MPLS_2:
-+		code = no_validation ? FM_KG_SCH_GEN_HT_INVALID : 0x19;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_MPLS_3:
-+		code = no_validation ? FM_KG_SCH_GEN_HT_INVALID : 0x29;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_MPLS_N:
-+		code = no_validation ? 0x7a : 0xa;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_IPv4_1:
-+		code = no_validation ? 0x7b : 0xb;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_IPv6_1:
-+		code = no_validation ? 0x7b : 0x1b;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_IPv4_2:
-+		code = no_validation ? 0x7c : 0xc;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_IPv6_2:
-+		code = no_validation ? 0x7c : 0x1c;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_MINENCAP:
-+		code = no_validation ? 0x7c : 0x2c;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_IP_PID:
-+		code = no_validation ? 0x72 : 0x2;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_GRE:
-+		code = no_validation ? 0x7d : 0xd;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_TCP:
-+		code = no_validation ? 0x7e : 0xe;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_UDP:
-+		code = no_validation ? 0x7e : 0x1e;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_SCTP:
-+		code = no_validation ? 0x7e : 0x3e;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_DCCP:
-+		code = no_validation ? 0x7e : 0x4e;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_IPSEC_AH:
-+		code = no_validation ? 0x7e : 0x2e;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_IPSEC_ESP:
-+		code = no_validation ? 0x7e : 0x6e;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_SHIM_1:
-+		code = 0x70;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_SHIM_2:
-+		code = 0x71;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_FROM_DFLT:
-+		code = 0x10;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_FROM_FRAME_START:
-+		code = 0x40;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_FROM_PARSE_RESULT:
-+		code = 0x20;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_FROM_END_OF_PARSE:
-+		code = 0x7f;
-+		break;
-+
-+	case E_FMAN_KG_GEN_EXTRACT_FROM_FQID:
-+		code = 0x20;
-+		*offset += 0x20;
-+		break;
-+
-+	default:
-+		code = FM_KG_SCH_GEN_HT_INVALID;
-+	}
-+
-+	return (uint8_t)code;
-+}
-+
-+static uint32_t build_ar_scheme(uint8_t scheme,
-+				uint8_t hwport_id,
-+				bool update_counter,
-+				bool write)
-+{
-+	uint32_t rw;
-+
-+	rw = (uint32_t)(write ? FM_KG_KGAR_WRITE : FM_KG_KGAR_READ);
-+
-+	return (uint32_t)(FM_KG_KGAR_GO |
-+			rw |
-+			FM_KG_KGAR_SEL_SCHEME_ENTRY |
-+			hwport_id |
-+			((uint32_t)scheme << FM_KG_KGAR_NUM_SHIFT) |
-+			(update_counter ? FM_KG_KGAR_SCM_WSEL_UPDATE_CNT : 0));
-+}
-+
-+static uint32_t build_ar_cls_plan(uint8_t grp,
-+					uint8_t entries_mask,
-+					uint8_t hwport_id,
-+					bool write)
-+{
-+	uint32_t rw;
-+
-+	rw = (uint32_t)(write ? FM_KG_KGAR_WRITE : FM_KG_KGAR_READ);
-+
-+	return (uint32_t)(FM_KG_KGAR_GO |
-+			rw |
-+			FM_PCD_KG_KGAR_SEL_CLS_PLAN_ENTRY |
-+			hwport_id |
-+			((uint32_t)grp << FM_KG_KGAR_NUM_SHIFT) |
-+			((uint32_t)entries_mask << FM_KG_KGAR_WSEL_SHIFT));
-+}
-+
-+int fman_kg_write_ar_wait(struct fman_kg_regs *regs, uint32_t fmkg_ar)
-+{
-+	iowrite32be(fmkg_ar, &regs->fmkg_ar);
-+	/* Wait for GO to be idle and read error */
-+	while ((fmkg_ar = ioread32be(&regs->fmkg_ar)) & FM_KG_KGAR_GO) ;
-+	if (fmkg_ar & FM_PCD_KG_KGAR_ERR)
-+		return -EINVAL;
-+	return 0;
-+}
-+
-+void fman_kg_write_sp(struct fman_kg_regs *regs, uint32_t sp, bool add)
-+{
-+
-+	struct fman_kg_pe_regs *kgpe_regs;
-+	uint32_t tmp;
-+
-+	kgpe_regs = (struct fman_kg_pe_regs *)&(regs->fmkg_indirect[0]);
-+	tmp = ioread32be(&kgpe_regs->fmkg_pe_sp);
-+
-+	if (add)
-+		tmp |= sp;
-+	else /* clear */
-+		tmp &= ~sp;
-+
-+	iowrite32be(tmp, &kgpe_regs->fmkg_pe_sp);
-+
-+}
-+
-+void fman_kg_write_cpp(struct fman_kg_regs *regs, uint32_t cpp)
-+{
-+	struct fman_kg_pe_regs *kgpe_regs;
-+
-+	kgpe_regs = (struct fman_kg_pe_regs *)&(regs->fmkg_indirect[0]);
-+
-+	iowrite32be(cpp, &kgpe_regs->fmkg_pe_cpp);
-+}
-+
-+void fman_kg_get_event(struct fman_kg_regs *regs,
-+			uint32_t *event,
-+			uint32_t *scheme_idx)
-+{
-+	uint32_t mask, force;
-+
-+	*event = ioread32be(&regs->fmkg_eer);
-+	mask = ioread32be(&regs->fmkg_eeer);
-+	*scheme_idx = ioread32be(&regs->fmkg_seer);
-+	*scheme_idx &= ioread32be(&regs->fmkg_seeer);
-+
-+	*event &= mask;
-+
-+	/* clear the forced events */
-+	force = ioread32be(&regs->fmkg_feer);
-+	if (force & *event)
-+		iowrite32be(force & ~*event ,&regs->fmkg_feer);
-+
-+	iowrite32be(*event, &regs->fmkg_eer);
-+	iowrite32be(*scheme_idx, &regs->fmkg_seer);
-+}
-+
-+
-+void fman_kg_init(struct fman_kg_regs *regs,
-+			uint32_t exceptions,
-+			uint32_t dflt_nia)
-+{
-+	uint32_t tmp;
-+	int i;
-+
-+	iowrite32be(FM_EX_KG_DOUBLE_ECC | FM_EX_KG_KEYSIZE_OVERFLOW,
-+			&regs->fmkg_eer);
-+
-+	tmp = 0;
-+	if (exceptions & FM_EX_KG_DOUBLE_ECC)
-+        	tmp |= FM_EX_KG_DOUBLE_ECC;
-+
-+	if (exceptions & FM_EX_KG_KEYSIZE_OVERFLOW)
-+		tmp |= FM_EX_KG_KEYSIZE_OVERFLOW;
-+
-+	iowrite32be(tmp, &regs->fmkg_eeer);
-+	iowrite32be(0, &regs->fmkg_fdor);
-+	iowrite32be(0, &regs->fmkg_gdv0r);
-+	iowrite32be(0, &regs->fmkg_gdv1r);
-+	iowrite32be(dflt_nia, &regs->fmkg_gcr);
-+
-+	/* Clear binding between ports to schemes and classification plans
-+	 * so that all ports are not bound to any scheme/classification plan */
-+	for (i = 0; i < FMAN_MAX_NUM_OF_HW_PORTS; i++) {
-+		clear_pe_all_scheme(regs, (uint8_t)i);
-+		clear_pe_all_cls_plan(regs, (uint8_t)i);
-+	}
-+}
-+
-+void fman_kg_enable_scheme_interrupts(struct fman_kg_regs *regs)
-+{
-+	/* enable and enable all scheme interrupts */
-+	iowrite32be(0xFFFFFFFF, &regs->fmkg_seer);
-+	iowrite32be(0xFFFFFFFF, &regs->fmkg_seeer);
-+}
-+
-+void fman_kg_enable(struct fman_kg_regs *regs)
-+{
-+	iowrite32be(ioread32be(&regs->fmkg_gcr) | FM_KG_KGGCR_EN,
-+			&regs->fmkg_gcr);
-+}
-+
-+void fman_kg_disable(struct fman_kg_regs *regs)
-+{
-+	iowrite32be(ioread32be(&regs->fmkg_gcr) & ~FM_KG_KGGCR_EN,
-+			&regs->fmkg_gcr);
-+}
-+
-+void fman_kg_set_data_after_prs(struct fman_kg_regs *regs, uint8_t offset)
-+{
-+	iowrite32be(offset, &regs->fmkg_fdor);
-+}
-+
-+void fman_kg_set_dflt_val(struct fman_kg_regs *regs,
-+				uint8_t def_id,
-+				uint32_t val)
-+{
-+	if(def_id == 0)
-+		iowrite32be(val, &regs->fmkg_gdv0r);
-+	else
-+		iowrite32be(val, &regs->fmkg_gdv1r);
-+}
-+
-+
-+void fman_kg_set_exception(struct fman_kg_regs *regs,
-+				uint32_t exception,
-+				bool enable)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&regs->fmkg_eeer);
-+
-+	if (enable) {
-+		tmp |= exception;
-+	} else {
-+		tmp &= ~exception;
-+	}
-+
-+	iowrite32be(tmp, &regs->fmkg_eeer);
-+}
-+
-+void fman_kg_get_exception(struct fman_kg_regs *regs,
-+				uint32_t *events,
-+				uint32_t *scheme_ids,
-+				bool clear)
-+{
-+	uint32_t mask;
-+
-+	*events = ioread32be(&regs->fmkg_eer);
-+	mask = ioread32be(&regs->fmkg_eeer);
-+	*events &= mask;
-+ 
-+	*scheme_ids = 0;
-+
-+	if (*events & FM_EX_KG_KEYSIZE_OVERFLOW) {
-+		*scheme_ids = ioread32be(&regs->fmkg_seer);
-+		mask = ioread32be(&regs->fmkg_seeer);
-+		*scheme_ids &= mask;
-+	}
-+
-+	if (clear) {
-+		iowrite32be(*scheme_ids, &regs->fmkg_seer);
-+		iowrite32be(*events, &regs->fmkg_eer);
-+	}
-+}
-+
-+void fman_kg_get_capture(struct fman_kg_regs *regs,
-+				struct fman_kg_ex_ecc_attr *ecc_attr,
-+				bool clear)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&regs->fmkg_serc);
-+
-+	if (tmp & KG_FMKG_SERC_CAP) {
-+		/* Captured data is valid */
-+		ecc_attr->valid = TRUE;
-+		ecc_attr->double_ecc =
-+			(bool)((tmp & KG_FMKG_SERC_CET) ? TRUE : FALSE);
-+		ecc_attr->single_ecc_count =
-+			(uint8_t)((tmp & KG_FMKG_SERC_CNT_MSK) >>
-+					KG_FMKG_SERC_CNT_SHIFT);
-+		ecc_attr->addr = (uint16_t)(tmp & KG_FMKG_SERC_ADDR_MSK);
-+
-+		if (clear)
-+			iowrite32be(KG_FMKG_SERC_CAP, &regs->fmkg_serc);
-+	} else {
-+		/* No ECC error is captured */
-+		ecc_attr->valid = FALSE;
-+	}
-+}
-+
-+int fman_kg_build_scheme(struct fman_kg_scheme_params *params,
-+				struct fman_kg_scheme_regs *scheme_regs)
-+{
-+	struct fman_kg_extract_params *extract_params;
-+	struct fman_kg_gen_extract_params *gen_params;
-+	uint32_t tmp_reg, i, select, mask, fqb;
-+	uint8_t offset, shift, ht;
-+
-+	/* Zero out all registers so no need to care about unused ones */
-+	memset(scheme_regs, 0, sizeof(struct fman_kg_scheme_regs));
-+
-+	/* Mode register */
-+	tmp_reg = fm_kg_build_nia(params->next_engine,
-+			params->next_engine_action);
-+	if (tmp_reg == KG_NIA_INVALID) {
-+		return -EINVAL;
-+	}
-+
-+	if (params->next_engine == E_FMAN_PCD_PLCR) {
-+		tmp_reg |= FMAN_KG_SCH_MODE_NIA_PLCR;
-+	}
-+	else if (params->next_engine == E_FMAN_PCD_CC) {
-+		tmp_reg |= (uint32_t)params->cc_params.base_offset <<
-+				FMAN_KG_SCH_MODE_CCOBASE_SHIFT;
-+	}
-+
-+	tmp_reg |= FMAN_KG_SCH_MODE_EN;
-+	scheme_regs->kgse_mode = tmp_reg;
-+
-+	/* Match vector */
-+	scheme_regs->kgse_mv = params->match_vector;
-+
-+	extract_params = &params->extract_params;
-+
-+	/* Scheme default values registers */
-+	scheme_regs->kgse_dv0 = extract_params->def_scheme_0;
-+	scheme_regs->kgse_dv1 = extract_params->def_scheme_1;
-+
-+	/* Extract Known Fields Command register */
-+	scheme_regs->kgse_ekfc = extract_params->known_fields;
-+
-+	/* Entry Extract Known Default Value register */
-+	tmp_reg = 0;
-+	tmp_reg |= extract_params->known_fields_def.mac_addr <<
-+			FMAN_KG_SCH_DEF_MAC_ADDR_SHIFT;
-+	tmp_reg |= extract_params->known_fields_def.vlan_tci <<
-+			FMAN_KG_SCH_DEF_VLAN_TCI_SHIFT;
-+	tmp_reg |= extract_params->known_fields_def.etype <<
-+			FMAN_KG_SCH_DEF_ETYPE_SHIFT;
-+	tmp_reg |= extract_params->known_fields_def.ppp_sid <<
-+			FMAN_KG_SCH_DEF_PPP_SID_SHIFT;
-+	tmp_reg |= extract_params->known_fields_def.ppp_pid <<
-+			FMAN_KG_SCH_DEF_PPP_PID_SHIFT;
-+	tmp_reg |= extract_params->known_fields_def.mpls <<
-+			FMAN_KG_SCH_DEF_MPLS_SHIFT;
-+	tmp_reg |= extract_params->known_fields_def.ip_addr <<
-+			FMAN_KG_SCH_DEF_IP_ADDR_SHIFT;
-+	tmp_reg |= extract_params->known_fields_def.ptype <<
-+			FMAN_KG_SCH_DEF_PTYPE_SHIFT;
-+	tmp_reg |= extract_params->known_fields_def.ip_tos_tc <<
-+			FMAN_KG_SCH_DEF_IP_TOS_TC_SHIFT;
-+	tmp_reg |= extract_params->known_fields_def.ipv6_fl <<
-+			FMAN_KG_SCH_DEF_IPv6_FL_SHIFT;
-+	tmp_reg |= extract_params->known_fields_def.ipsec_spi <<
-+			FMAN_KG_SCH_DEF_IPSEC_SPI_SHIFT;
-+	tmp_reg |= extract_params->known_fields_def.l4_port <<
-+			FMAN_KG_SCH_DEF_L4_PORT_SHIFT;
-+	tmp_reg |= extract_params->known_fields_def.tcp_flg <<
-+			FMAN_KG_SCH_DEF_TCP_FLG_SHIFT;
-+
-+	scheme_regs->kgse_ekdv = tmp_reg;
-+
-+	/* Generic extract registers */
-+	if (extract_params->gen_extract_num > FM_KG_NUM_OF_GENERIC_REGS) {
-+		return -EINVAL;
-+	}
-+
-+	for (i = 0; i < extract_params->gen_extract_num; i++) {
-+		gen_params = extract_params->gen_extract + i;
-+
-+		tmp_reg = FMAN_KG_SCH_GEN_VALID;
-+		tmp_reg |= (uint32_t)gen_params->def_val <<
-+				FMAN_KG_SCH_GEN_DEF_SHIFT;
-+
-+		if (gen_params->type == E_FMAN_KG_HASH_EXTRACT) {
-+			if ((gen_params->extract > FMAN_KG_SCH_GEN_SIZE_MAX) ||
-+					(gen_params->extract == 0)) {
-+				return -EINVAL;
-+			}
-+		} else {
-+			tmp_reg |= FMAN_KG_SCH_GEN_OR;
-+		}
-+
-+		tmp_reg |= (uint32_t)gen_params->extract <<
-+				FMAN_KG_SCH_GEN_SIZE_SHIFT;
-+		tmp_reg |= (uint32_t)gen_params->mask <<
-+				FMAN_KG_SCH_GEN_MASK_SHIFT;
-+
-+		offset = gen_params->offset;
-+		ht = get_gen_ht_code(gen_params->src,
-+				gen_params->no_validation,
-+				&offset);
-+		tmp_reg |= (uint32_t)ht << FMAN_KG_SCH_GEN_HT_SHIFT;
-+		tmp_reg |= offset;
-+
-+		scheme_regs->kgse_gec[i] = tmp_reg;
-+	}
-+
-+	/* Masks registers */
-+	if (extract_params->masks_num > FM_KG_EXTRACT_MASKS_NUM) {
-+		return -EINVAL;
-+	}
-+
-+	select = 0;
-+	mask = 0;
-+	fqb = 0;
-+	for (i = 0; i < extract_params->masks_num; i++) {
-+		/* MCSx fields */
-+		KG_GET_MASK_SEL_SHIFT(shift, i);
-+		if (extract_params->masks[i].is_known) {
-+			/* Mask known field */
-+			select |= extract_params->masks[i].field_or_gen_idx <<
-+					shift;
-+		} else {
-+			/* Mask generic extract */
-+			select |= (extract_params->masks[i].field_or_gen_idx +
-+					FM_KG_MASK_SEL_GEN_BASE) << shift;
-+		}
-+
-+		/* MOx fields - spread between se_bmch and se_fqb registers */
-+		KG_GET_MASK_OFFSET_SHIFT(shift, i);
-+		if (i < 2) {
-+			select |= (uint32_t)extract_params->masks[i].offset <<
-+					shift;
-+		} else {
-+			fqb |= (uint32_t)extract_params->masks[i].offset <<
-+					shift;
-+		}
-+
-+		/* BMx fields */
-+		KG_GET_MASK_SHIFT(shift, i);
-+		mask |= (uint32_t)extract_params->masks[i].mask << shift;
-+	}
-+
-+	/* Finish with rest of BMx fileds -
-+	 * don't mask bits for unused masks by setting
-+	 * corresponding BMx field = 0xFF */
-+	for (i = extract_params->masks_num; i < FM_KG_EXTRACT_MASKS_NUM; i++) {
-+		KG_GET_MASK_SHIFT(shift, i);
-+		mask |= 0xFF << shift;
-+	}
-+
-+	scheme_regs->kgse_bmch = select;
-+	scheme_regs->kgse_bmcl = mask;
-+
-+	/* Finish with FQB register initialization.
-+	 * Check fqid is 24-bit value. */
-+	if (params->base_fqid & ~0x00FFFFFF) {
-+		return -EINVAL;
-+	}
-+
-+	fqb |= params->base_fqid;
-+	scheme_regs->kgse_fqb = fqb;
-+
-+	/* Hash Configuration register */
-+	tmp_reg = 0;
-+	if (params->hash_params.use_hash) {
-+		/* Check hash mask is 24-bit value */
-+		if (params->hash_params.mask & ~0x00FFFFFF) {
-+			return -EINVAL;
-+		}
-+
-+		/* Hash function produces 64-bit value, 24 bits of that
-+		 * are used to generate fq_id and policer profile.
-+		 * Thus, maximal shift is 40 bits to allow 24 bits out of 64.
-+		 */
-+		if (params->hash_params.shift_r > FMAN_KG_SCH_HASH_HSHIFT_MAX) {
-+			return -EINVAL;
-+		}
-+
-+		tmp_reg |= params->hash_params.mask;
-+		tmp_reg |= (uint32_t)params->hash_params.shift_r <<
-+				FMAN_KG_SCH_HASH_HSHIFT_SHIFT;
-+
-+		if (params->hash_params.sym) {
-+			tmp_reg |= FMAN_KG_SCH_HASH_SYM;
-+		}
-+
-+	}
-+
-+	if (params->bypass_fqid_gen) {
-+		tmp_reg |= FMAN_KG_SCH_HASH_NO_FQID_GEN;
-+	}
-+
-+	scheme_regs->kgse_hc = tmp_reg;
-+
-+	/* Policer Profile register */
-+	if (params->policer_params.bypass_pp_gen) {
-+		tmp_reg = 0;
-+	} else {
-+		/* Lower 8 bits of 24-bits extracted from hash result
-+		 * are used for policer profile generation.
-+		 * That leaves maximum shift value = 23. */
-+		if (params->policer_params.shift > FMAN_KG_SCH_PP_SHIFT_MAX) {
-+			return -EINVAL;
-+		}
-+
-+		tmp_reg = params->policer_params.base;
-+		tmp_reg |= ((uint32_t)params->policer_params.shift <<
-+				FMAN_KG_SCH_PP_SH_SHIFT) &
-+				FMAN_KG_SCH_PP_SH_MASK;
-+		tmp_reg |= ((uint32_t)params->policer_params.shift <<
-+				FMAN_KG_SCH_PP_SL_SHIFT) &
-+				FMAN_KG_SCH_PP_SL_MASK;
-+		tmp_reg |= (uint32_t)params->policer_params.mask <<
-+				FMAN_KG_SCH_PP_MASK_SHIFT;
-+	}
-+
-+	scheme_regs->kgse_ppc = tmp_reg;
-+
-+	/* Coarse Classification Bit Select register */
-+	if (params->next_engine == E_FMAN_PCD_CC) {
-+		scheme_regs->kgse_ccbs = params->cc_params.qlcv_bits_sel;
-+	}
-+
-+	/* Packets Counter register */
-+	if (params->update_counter) {
-+		scheme_regs->kgse_spc = params->counter_value;
-+	}
-+
-+	return 0;
-+}
-+
-+int fman_kg_write_scheme(struct fman_kg_regs *regs,
-+				uint8_t scheme_id,
-+				uint8_t hwport_id,
-+				struct fman_kg_scheme_regs *scheme_regs,
-+				bool update_counter)
-+{
-+	struct fman_kg_scheme_regs *kgse_regs;
-+	uint32_t tmp_reg;
-+	int err, i;
-+
-+	/* Write indirect scheme registers */
-+	kgse_regs = (struct fman_kg_scheme_regs *)&(regs->fmkg_indirect[0]);
-+
-+	iowrite32be(scheme_regs->kgse_mode, &kgse_regs->kgse_mode);
-+	iowrite32be(scheme_regs->kgse_ekfc, &kgse_regs->kgse_ekfc);
-+	iowrite32be(scheme_regs->kgse_ekdv, &kgse_regs->kgse_ekdv);
-+	iowrite32be(scheme_regs->kgse_bmch, &kgse_regs->kgse_bmch);
-+	iowrite32be(scheme_regs->kgse_bmcl, &kgse_regs->kgse_bmcl);
-+	iowrite32be(scheme_regs->kgse_fqb, &kgse_regs->kgse_fqb);
-+	iowrite32be(scheme_regs->kgse_hc, &kgse_regs->kgse_hc);
-+	iowrite32be(scheme_regs->kgse_ppc, &kgse_regs->kgse_ppc);
-+	iowrite32be(scheme_regs->kgse_spc, &kgse_regs->kgse_spc);
-+	iowrite32be(scheme_regs->kgse_dv0, &kgse_regs->kgse_dv0);
-+	iowrite32be(scheme_regs->kgse_dv1, &kgse_regs->kgse_dv1);
-+	iowrite32be(scheme_regs->kgse_ccbs, &kgse_regs->kgse_ccbs);
-+	iowrite32be(scheme_regs->kgse_mv, &kgse_regs->kgse_mv);
-+
-+	for (i = 0 ; i < FM_KG_NUM_OF_GENERIC_REGS ; i++)
-+		iowrite32be(scheme_regs->kgse_gec[i], &kgse_regs->kgse_gec[i]);
-+
-+	/* Write AR (Action register) */
-+	tmp_reg = build_ar_scheme(scheme_id, hwport_id, update_counter, TRUE);
-+	err = fman_kg_write_ar_wait(regs, tmp_reg);
-+	return err;
-+}
-+
-+int fman_kg_delete_scheme(struct fman_kg_regs *regs,
-+				uint8_t scheme_id,
-+				uint8_t hwport_id)
-+{
-+	struct fman_kg_scheme_regs *kgse_regs;
-+	uint32_t tmp_reg;
-+	int err, i;
-+
-+	kgse_regs = (struct fman_kg_scheme_regs *)&(regs->fmkg_indirect[0]);
-+
-+	/* Clear all registers including enable bit in mode register */
-+	for (i = 0; i < (sizeof(struct fman_kg_scheme_regs)) / 4; ++i) {
-+		iowrite32be(0, ((uint32_t *)kgse_regs + i));
-+	}
-+
-+	/* Write AR (Action register) */
-+	tmp_reg = build_ar_scheme(scheme_id, hwport_id, FALSE, TRUE);
-+	err = fman_kg_write_ar_wait(regs, tmp_reg);
-+	return err;
-+}
-+
-+int fman_kg_get_scheme_counter(struct fman_kg_regs *regs,
-+				uint8_t scheme_id,
-+				uint8_t hwport_id,
-+				uint32_t *counter)
-+{
-+	struct fman_kg_scheme_regs  *kgse_regs;
-+	uint32_t                    tmp_reg;
-+	int                         err;
-+
-+	kgse_regs = (struct fman_kg_scheme_regs *)&(regs->fmkg_indirect[0]);
-+ 
-+	tmp_reg = build_ar_scheme(scheme_id, hwport_id, TRUE, FALSE);
-+    	err = fman_kg_write_ar_wait(regs, tmp_reg);
-+
-+	if (err != 0)
-+		return err;
-+
-+	*counter = ioread32be(&kgse_regs->kgse_spc);
-+
-+	return 0;
-+}
-+
-+int fman_kg_set_scheme_counter(struct fman_kg_regs *regs,
-+				uint8_t scheme_id,
-+				uint8_t hwport_id,
-+				uint32_t counter)
-+{
-+	struct fman_kg_scheme_regs *kgse_regs;
-+	uint32_t tmp_reg;
-+	int err;
-+
-+	kgse_regs = (struct fman_kg_scheme_regs *)&(regs->fmkg_indirect[0]);
-+
-+	tmp_reg = build_ar_scheme(scheme_id, hwport_id, TRUE, FALSE);
-+
-+	err = fman_kg_write_ar_wait(regs, tmp_reg);
-+	if (err != 0)
-+		return err;
-+ 
-+	/* Keygen indirect access memory contains all scheme_id registers
-+	 * by now. Change only counter value. */
-+	iowrite32be(counter, &kgse_regs->kgse_spc);
-+
-+	/* Write back scheme registers */
-+	tmp_reg = build_ar_scheme(scheme_id, hwport_id, TRUE, TRUE);
-+	err = fman_kg_write_ar_wait(regs, tmp_reg);
-+
-+	return err;
-+}
-+
-+uint32_t fman_kg_get_schemes_total_counter(struct fman_kg_regs *regs)
-+{
-+    return ioread32be(&regs->fmkg_tpc);
-+}
-+
-+int fman_kg_build_cls_plan(struct fman_kg_cls_plan_params *params,
-+				struct fman_kg_cp_regs *cls_plan_regs)
-+{
-+	uint8_t entries_set, entry_bit;
-+	int i;
-+
-+	/* Zero out all group's register */
-+	memset(cls_plan_regs, 0, sizeof(struct fman_kg_cp_regs));
-+
-+	/* Go over all classification entries in params->entries_mask and
-+	 * configure the corresponding cpe register */
-+	entries_set = params->entries_mask;
-+	for (i = 0; entries_set; i++) {
-+		entry_bit = (uint8_t)(0x80 >> i);
-+		if ((entry_bit & entries_set) == 0)
-+			continue;
-+		entries_set ^= entry_bit;
-+		cls_plan_regs->kgcpe[i] = params->mask_vector[i];
-+	}
-+
-+	return 0;
-+}
-+
-+int fman_kg_write_cls_plan(struct fman_kg_regs *regs,
-+				uint8_t grp_id,
-+				uint8_t entries_mask,
-+				uint8_t hwport_id,
-+				struct fman_kg_cp_regs *cls_plan_regs)
-+{
-+	struct fman_kg_cp_regs *kgcpe_regs;
-+	uint32_t tmp_reg;
-+	int i, err;
-+
-+	/* Check group index is valid and the group isn't empty */
-+	if (grp_id >= FM_KG_CLS_PLAN_GRPS_NUM)
-+		return -EINVAL;
-+
-+	/* Write indirect classification plan registers */
-+	kgcpe_regs = (struct fman_kg_cp_regs *)&(regs->fmkg_indirect[0]);
-+
-+	for (i = 0; i < FM_KG_NUM_CLS_PLAN_ENTR; i++) {
-+		iowrite32be(cls_plan_regs->kgcpe[i], &kgcpe_regs->kgcpe[i]);
-+	}
-+
-+	tmp_reg = build_ar_cls_plan(grp_id, entries_mask, hwport_id, TRUE);
-+	err = fman_kg_write_ar_wait(regs, tmp_reg);
-+	return err;
-+}
-+
-+int fman_kg_write_bind_schemes(struct fman_kg_regs *regs,
-+				uint8_t hwport_id,
-+				uint32_t schemes)
-+{
-+	struct fman_kg_pe_regs *kg_pe_regs;
-+	uint32_t tmp_reg;
-+	int err;
-+
-+	kg_pe_regs = (struct fman_kg_pe_regs *)&(regs->fmkg_indirect[0]);
-+
-+	iowrite32be(schemes, &kg_pe_regs->fmkg_pe_sp);
-+
-+	tmp_reg = build_ar_bind_scheme(hwport_id, TRUE);
-+	err = fman_kg_write_ar_wait(regs, tmp_reg);
-+	return err;
-+}
-+
-+int fman_kg_build_bind_cls_plans(uint8_t grp_base,
-+					uint8_t grp_mask,
-+					uint32_t *bind_cls_plans)
-+{
-+	/* Check grp_base and grp_mask are 5-bits values */
-+	if ((grp_base & ~0x0000001F) || (grp_mask & ~0x0000001F))
-+		return -EINVAL;
-+
-+	*bind_cls_plans = (uint32_t) ((grp_mask << FMAN_KG_PE_CPP_MASK_SHIFT) | grp_base);
-+	return 0;
-+}
-+
-+
-+int fman_kg_write_bind_cls_plans(struct fman_kg_regs *regs,
-+					uint8_t hwport_id,
-+					uint32_t bind_cls_plans)
-+{
-+	struct fman_kg_pe_regs *kg_pe_regs;
-+	uint32_t tmp_reg;
-+	int err;
-+
-+	kg_pe_regs = (struct fman_kg_pe_regs *)&(regs->fmkg_indirect[0]);
-+
-+	iowrite32be(bind_cls_plans, &kg_pe_regs->fmkg_pe_cpp);
-+
-+	tmp_reg = build_ar_bind_cls_plan(hwport_id, TRUE);
-+	err = fman_kg_write_ar_wait(regs, tmp_reg);
-+	return err;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fman_prs.c
-@@ -0,0 +1,129 @@
-+/*
-+ * Copyright 2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "fsl_fman_prs.h"
-+
-+uint32_t fman_prs_get_err_event(struct fman_prs_regs *regs, uint32_t ev_mask)
-+{
-+	return ioread32be(&regs->fmpr_perr) & ev_mask;
-+}
-+
-+uint32_t fman_prs_get_err_ev_mask(struct fman_prs_regs *regs)
-+{
-+	return ioread32be(&regs->fmpr_perer);
-+}
-+
-+void fman_prs_ack_err_event(struct fman_prs_regs *regs, uint32_t event)
-+{
-+	iowrite32be(event, &regs->fmpr_perr);
-+}
-+
-+uint32_t fman_prs_get_expt_event(struct fman_prs_regs *regs, uint32_t ev_mask)
-+{
-+	return ioread32be(&regs->fmpr_pevr) & ev_mask;
-+}
-+
-+uint32_t fman_prs_get_expt_ev_mask(struct fman_prs_regs *regs)
-+{
-+	return ioread32be(&regs->fmpr_pever);
-+}
-+
-+void fman_prs_ack_expt_event(struct fman_prs_regs *regs, uint32_t event)
-+{
-+	iowrite32be(event, &regs->fmpr_pevr);
-+}
-+
-+void fman_prs_defconfig(struct fman_prs_cfg *cfg)
-+{
-+	cfg->port_id_stat = 0;
-+	cfg->max_prs_cyc_lim = DEFAULT_MAX_PRS_CYC_LIM;
-+	cfg->prs_exceptions = 0x03000000;
-+}
-+
-+int fman_prs_init(struct fman_prs_regs *regs, struct fman_prs_cfg *cfg)
-+{
-+	uint32_t tmp;
-+
-+	iowrite32be(cfg->max_prs_cyc_lim, &regs->fmpr_rpclim);
-+	iowrite32be((FM_PCD_PRS_SINGLE_ECC | FM_PCD_PRS_PORT_IDLE_STS),
-+			&regs->fmpr_pevr);
-+
-+	if (cfg->prs_exceptions & FM_PCD_EX_PRS_SINGLE_ECC)
-+		iowrite32be(FM_PCD_PRS_SINGLE_ECC, &regs->fmpr_pever);
-+	else
-+		iowrite32be(0, &regs->fmpr_pever);
-+
-+	iowrite32be(FM_PCD_PRS_DOUBLE_ECC, &regs->fmpr_perr);
-+
-+	tmp = 0;
-+	if (cfg->prs_exceptions & FM_PCD_EX_PRS_DOUBLE_ECC)
-+		tmp |= FM_PCD_PRS_DOUBLE_ECC;
-+	iowrite32be(tmp, &regs->fmpr_perer);
-+
-+	iowrite32be(cfg->port_id_stat, &regs->fmpr_ppsc);
-+
-+	return 0;
-+}
-+
-+void fman_prs_enable(struct fman_prs_regs *regs)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&regs->fmpr_rpimac) | FM_PCD_PRS_RPIMAC_EN;
-+	iowrite32be(tmp, &regs->fmpr_rpimac);
-+}
-+
-+void fman_prs_disable(struct fman_prs_regs *regs)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&regs->fmpr_rpimac) & ~FM_PCD_PRS_RPIMAC_EN;
-+	iowrite32be(tmp, &regs->fmpr_rpimac);
-+}
-+
-+int fman_prs_is_enabled(struct fman_prs_regs *regs)
-+{
-+	return ioread32be(&regs->fmpr_rpimac) & FM_PCD_PRS_RPIMAC_EN;
-+}
-+
-+void fman_prs_set_stst_port_msk(struct fman_prs_regs *regs, uint32_t pid_msk)
-+{
-+	iowrite32be(pid_msk, &regs->fmpr_ppsc);
-+}
-+
-+void fman_prs_set_stst(struct fman_prs_regs *regs, bool enable)
-+{
-+	if (enable)
-+		iowrite32be(FM_PCD_PRS_PPSC_ALL_PORTS, &regs->fmpr_ppsc);
-+	else
-+		iowrite32be(0, &regs->fmpr_ppsc);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/Makefile
-@@ -0,0 +1,15 @@
-+#
-+# Makefile for the Freescale Ethernet controllers
-+#
-+ccflags-y           += -DVERSION=\"\"
-+#
-+#Include netcomm SW specific definitions
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+
-+NCSW_FM_INC = $(srctree)/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/inc
-+
-+ccflags-y += -I$(NCSW_FM_INC)
-+
-+obj-y		+= fsl-ncsw-Pcd.o
-+
-+fsl-ncsw-Pcd-objs	:=   fm_port.o fm_port_im.o fman_port.o
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c
-@@ -0,0 +1,6436 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_port.c
-+
-+ @Description   FM driver routines implementation.
-+ *//***************************************************************************/
-+#include "error_ext.h"
-+#include "std_ext.h"
-+#include "string_ext.h"
-+#include "sprint_ext.h"
-+#include "debug_ext.h"
-+#include "fm_muram_ext.h"
-+
-+#include "fman_common.h"
-+#include "fm_port.h"
-+#include "fm_port_dsar.h"
-+#include "common/general.h"
-+
-+/****************************************/
-+/*       static functions               */
-+/****************************************/
-+static t_Error FmPortConfigAutoResForDeepSleepSupport1(t_FmPort *p_FmPort);
-+
-+static t_Error CheckInitParameters(t_FmPort *p_FmPort)
-+{
-+    t_FmPortDriverParam *p_Params = p_FmPort->p_FmPortDriverParam;
-+    struct fman_port_cfg *p_DfltConfig = &p_Params->dfltCfg;
-+    t_Error ans = E_OK;
-+    uint32_t unusedMask;
-+
-+    if (p_FmPort->imEn)
-+    {
-+        if (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G)
-+            if (p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth
-+                    > 2)
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_INVALID_VALUE,
-+                        ("fifoDeqPipelineDepth for IM 10G can't be larger than 2"));
-+
-+        if ((ans = FmPortImCheckInitParameters(p_FmPort)) != E_OK)
-+            return ERROR_CODE(ans);
-+    }
-+    else
-+    {
-+        /****************************************/
-+        /*   Rx only                            */
-+        /****************************************/
-+        if ((p_FmPort->portType == e_FM_PORT_TYPE_RX)
-+                || (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G))
-+        {
-+            /* external buffer pools */
-+            if (!p_Params->extBufPools.numOfPoolsUsed)
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_INVALID_VALUE,
-+                        ("extBufPools.numOfPoolsUsed=0. At least one buffer pool must be defined"));
-+
-+            if (FmSpCheckBufPoolsParams(&p_Params->extBufPools,
-+                                        p_Params->p_BackupBmPools,
-+                                        &p_Params->bufPoolDepletion) != E_OK)
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE, NO_MSG);
-+
-+            /* Check that part of IC that needs copying is small enough to enter start margin */
-+            if (p_Params->intContext.size
-+                    && (p_Params->intContext.size
-+                            + p_Params->intContext.extBufOffset
-+                            > p_Params->bufMargins.startMargins))
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                             ("intContext.size is larger than start margins"));
-+
-+            if ((p_Params->liodnOffset != (uint16_t)DPAA_LIODN_DONT_OVERRIDE)
-+                    && (p_Params->liodnOffset & ~FM_LIODN_OFFSET_MASK))
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_INVALID_VALUE,
-+                        ("liodnOffset is larger than %d", FM_LIODN_OFFSET_MASK+1));
-+
-+#ifdef FM_NO_BACKUP_POOLS
-+            if ((p_FmPort->fmRevInfo.majorRev != 4) && (p_FmPort->fmRevInfo.majorRev < 6))
-+            if (p_FmPort->p_FmPortDriverParam->p_BackupBmPools)
-+            RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("BackupBmPools"));
-+#endif /* FM_NO_BACKUP_POOLS */
-+        }
-+
-+        /****************************************/
-+        /*   Non Rx ports                       */
-+        /****************************************/
-+        else
-+        {
-+            if (p_Params->deqSubPortal >= FM_MAX_NUM_OF_SUB_PORTALS)
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_INVALID_VALUE,
-+                        (" deqSubPortal has to be in the range of 0 - %d", FM_MAX_NUM_OF_SUB_PORTALS));
-+
-+            /* to protect HW internal-context from overwrite */
-+            if ((p_Params->intContext.size)
-+                    && (p_Params->intContext.intContextOffset
-+                            < MIN_TX_INT_OFFSET))
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_INVALID_VALUE,
-+                        ("non-Rx intContext.intContextOffset can't be smaller than %d", MIN_TX_INT_OFFSET));
-+
-+            if ((p_FmPort->portType == e_FM_PORT_TYPE_TX)
-+                    || (p_FmPort->portType == e_FM_PORT_TYPE_TX_10G)
-+                    /* in O/H DEFAULT_notSupported indicates that it is not supported and should not be checked */
-+                    || (p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth
-+                            != DEFAULT_notSupported))
-+            {
-+                /* Check that not larger than 8 */
-+                if ((!p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth)
-+                        || (p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth
-+                                > MAX_FIFO_PIPELINE_DEPTH))
-+                    RETURN_ERROR(
-+                            MAJOR,
-+                            E_INVALID_VALUE,
-+                            ("fifoDeqPipelineDepth can't be larger than %d", MAX_FIFO_PIPELINE_DEPTH));
-+            }
-+        }
-+
-+        /****************************************/
-+        /*   Rx Or Offline Parsing              */
-+        /****************************************/
-+        if ((p_FmPort->portType == e_FM_PORT_TYPE_RX)
-+                || (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G)
-+                || (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING))
-+        {
-+            if (!p_Params->dfltFqid)
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                             ("dfltFqid must be between 1 and 2^24-1"));
-+#if defined(FM_CAPWAP_SUPPORT) && defined(FM_LOCKUP_ALIGNMENT_ERRATA_FMAN_SW004)
-+            if (p_FmPort->p_FmPortDriverParam->bufferPrefixContent.manipExtraSpace % 16)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("bufferPrefixContent.manipExtraSpace has to be devidable by 16"));
-+#endif /* defined(FM_CAPWAP_SUPPORT) && ... */
-+        }
-+
-+        /****************************************/
-+        /*   All ports                          */
-+        /****************************************/
-+        /* common BMI registers values */
-+        /* Check that Queue Id is not larger than 2^24, and is not 0 */
-+        if ((p_Params->errFqid & ~0x00FFFFFF) || !p_Params->errFqid)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                         ("errFqid must be between 1 and 2^24-1"));
-+        if (p_Params->dfltFqid & ~0x00FFFFFF)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                         ("dfltFqid must be between 1 and 2^24-1"));
-+    }
-+
-+    /****************************************/
-+    /*   Rx only                            */
-+    /****************************************/
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_RX)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G))
-+    {
-+        if (p_DfltConfig->rx_pri_elevation % BMI_FIFO_UNITS)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("rxFifoPriElevationLevel has to be divisible by %d", BMI_FIFO_UNITS));
-+        if ((p_DfltConfig->rx_pri_elevation < BMI_FIFO_UNITS)
-+                || (p_DfltConfig->rx_pri_elevation > MAX_PORT_FIFO_SIZE))
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("rxFifoPriElevationLevel has to be in the range of 256 - %d", MAX_PORT_FIFO_SIZE));
-+        if (p_DfltConfig->rx_fifo_thr % BMI_FIFO_UNITS)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("rxFifoThreshold has to be divisible by %d", BMI_FIFO_UNITS));
-+        if ((p_DfltConfig->rx_fifo_thr < BMI_FIFO_UNITS)
-+                || (p_DfltConfig->rx_fifo_thr > MAX_PORT_FIFO_SIZE))
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("rxFifoThreshold has to be in the range of 256 - %d", MAX_PORT_FIFO_SIZE));
-+
-+        /* Check that not larger than 16 */
-+        if (p_DfltConfig->rx_cut_end_bytes > FRAME_END_DATA_SIZE)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("cutBytesFromEnd can't be larger than %d", FRAME_END_DATA_SIZE));
-+
-+        if (FmSpCheckBufMargins(&p_Params->bufMargins) != E_OK)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, NO_MSG);
-+
-+        /* extra FIFO size (allowed only to Rx ports) */
-+        if (p_Params->setSizeOfFifo
-+                && (p_FmPort->fifoBufs.extra % BMI_FIFO_UNITS))
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("fifoBufs.extra has to be divisible by %d", BMI_FIFO_UNITS));
-+
-+        if (p_Params->bufPoolDepletion.poolsGrpModeEnable
-+                && !p_Params->bufPoolDepletion.numOfPools)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("bufPoolDepletion.numOfPools can not be 0 when poolsGrpModeEnable=TRUE"));
-+#ifdef FM_CSI_CFED_LIMIT
-+        if (p_FmPort->fmRevInfo.majorRev == 4)
-+        {
-+            /* Check that not larger than 16 */
-+            if (p_DfltConfig->rx_cut_end_bytes + p_DfltConfig->checksum_bytes_ignore > FRAME_END_DATA_SIZE)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("cheksumLastBytesIgnore + cutBytesFromEnd can't be larger than %d", FRAME_END_DATA_SIZE));
-+        }
-+#endif /* FM_CSI_CFED_LIMIT */
-+    }
-+
-+    /****************************************/
-+    /*   Non Rx ports                       */
-+    /****************************************/
-+    /* extra FIFO size (allowed only to Rx ports) */
-+    else
-+        if (p_FmPort->fifoBufs.extra)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                         (" No fifoBufs.extra for non Rx ports"));
-+
-+    /****************************************/
-+    /*   Tx only                            */
-+    /****************************************/
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_TX)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_TX_10G))
-+    {
-+        if (p_DfltConfig->tx_fifo_min_level % BMI_FIFO_UNITS)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("txFifoMinFillLevel has to be divisible by %d", BMI_FIFO_UNITS));
-+        if (p_DfltConfig->tx_fifo_min_level > (MAX_PORT_FIFO_SIZE - 256))
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("txFifoMinFillLevel has to be in the range of 0 - %d", (MAX_PORT_FIFO_SIZE - 256)));
-+        if (p_DfltConfig->tx_fifo_low_comf_level % BMI_FIFO_UNITS)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("txFifoLowComfLevel has to be divisible by %d", BMI_FIFO_UNITS));
-+        if ((p_DfltConfig->tx_fifo_low_comf_level < BMI_FIFO_UNITS)
-+                || (p_DfltConfig->tx_fifo_low_comf_level > MAX_PORT_FIFO_SIZE))
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("txFifoLowComfLevel has to be in the range of 256 - %d", MAX_PORT_FIFO_SIZE));
-+
-+        if (p_FmPort->portType == e_FM_PORT_TYPE_TX)
-+            if (p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth
-+                    > 2)
-+                RETURN_ERROR(
-+                        MAJOR, E_INVALID_VALUE,
-+                        ("fifoDeqPipelineDepth for 1G can't be larger than 2"));
-+    }
-+
-+    /****************************************/
-+    /*   Non Tx Ports                       */
-+    /****************************************/
-+    /* If discard override was selected , no frames may be discarded. */
-+    else
-+        if (p_DfltConfig->discard_override && p_Params->errorsToDiscard)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_CONFLICT,
-+                    ("errorsToDiscard is not empty, but frmDiscardOverride selected (all discarded frames to be enqueued to error queue)."));
-+
-+    /****************************************/
-+    /*   Rx and Offline parsing             */
-+    /****************************************/
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_RX)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING))
-+    {
-+        if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+            unusedMask = BMI_STATUS_OP_MASK_UNUSED;
-+        else
-+            unusedMask = BMI_STATUS_RX_MASK_UNUSED;
-+
-+        /* Check that no common bits with BMI_STATUS_MASK_UNUSED */
-+        if (p_Params->errorsToDiscard & unusedMask)
-+            RETURN_ERROR(MAJOR, E_INVALID_SELECTION,
-+                         ("errorsToDiscard contains undefined bits"));
-+    }
-+
-+    /****************************************/
-+    /*   Offline Ports                      */
-+    /****************************************/
-+#ifdef FM_OP_OPEN_DMA_MIN_LIMIT
-+    if ((p_FmPort->fmRevInfo.majorRev >= 6)
-+            && (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+            && p_Params->setNumOfOpenDmas
-+            && (p_FmPort->openDmas.num < MIN_NUM_OF_OP_DMAS))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("For Offline port, openDmas.num can't be smaller than %d", MIN_NUM_OF_OP_DMAS));
-+#endif /* FM_OP_OPEN_DMA_MIN_LIMIT */
-+
-+    /****************************************/
-+    /*   Offline & HC Ports                 */
-+    /****************************************/
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_OH_HOST_COMMAND))
-+    {
-+#ifndef FM_FRAME_END_PARAMS_FOR_OP
-+        if ((p_FmPort->fmRevInfo.majorRev < 6) &&
-+                (p_FmPort->p_FmPortDriverParam->cheksumLastBytesIgnore != DEFAULT_notSupported))
-+        /* this is an indication that user called config for this mode which is not supported in this integration */
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("cheksumLastBytesIgnore is available for Rx & Tx ports only"));
-+#endif /* !FM_FRAME_END_PARAMS_FOR_OP */
-+
-+#ifndef FM_DEQ_PIPELINE_PARAMS_FOR_OP
-+        if ((!((p_FmPort->fmRevInfo.majorRev == 4) ||
-+                                (p_FmPort->fmRevInfo.majorRev >= 6))) &&
-+                (p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth != DEFAULT_notSupported))
-+        /* this is an indication that user called config for this mode which is not supported in this integration */
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION, ("fifoDeqPipelineDepth is available for Tx ports only"));
-+#endif /* !FM_DEQ_PIPELINE_PARAMS_FOR_OP */
-+    }
-+
-+    /****************************************/
-+    /*   All ports                          */
-+    /****************************************/
-+    /* Check that not larger than 16 */
-+    if ((p_Params->cheksumLastBytesIgnore > FRAME_END_DATA_SIZE)
-+            && ((p_Params->cheksumLastBytesIgnore != DEFAULT_notSupported)))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("cheksumLastBytesIgnore can't be larger than %d", FRAME_END_DATA_SIZE));
-+
-+    if (FmSpCheckIntContextParams(&p_Params->intContext) != E_OK)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, NO_MSG);
-+
-+    /* common BMI registers values */
-+    if (p_Params->setNumOfTasks
-+            && ((!p_FmPort->tasks.num)
-+                    || (p_FmPort->tasks.num > MAX_NUM_OF_TASKS)))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("tasks.num can't be larger than %d", MAX_NUM_OF_TASKS));
-+    if (p_Params->setNumOfTasks
-+            && (p_FmPort->tasks.extra > MAX_NUM_OF_EXTRA_TASKS))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("tasks.extra can't be larger than %d", MAX_NUM_OF_EXTRA_TASKS));
-+    if (p_Params->setNumOfOpenDmas
-+            && ((!p_FmPort->openDmas.num)
-+                    || (p_FmPort->openDmas.num > MAX_NUM_OF_DMAS)))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("openDmas.num can't be larger than %d", MAX_NUM_OF_DMAS));
-+    if (p_Params->setNumOfOpenDmas
-+            && (p_FmPort->openDmas.extra > MAX_NUM_OF_EXTRA_DMAS))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("openDmas.extra can't be larger than %d", MAX_NUM_OF_EXTRA_DMAS));
-+    if (p_Params->setSizeOfFifo
-+            && (!p_FmPort->fifoBufs.num
-+                    || (p_FmPort->fifoBufs.num > MAX_PORT_FIFO_SIZE)))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("fifoBufs.num has to be in the range of 256 - %d", MAX_PORT_FIFO_SIZE));
-+    if (p_Params->setSizeOfFifo && (p_FmPort->fifoBufs.num % BMI_FIFO_UNITS))
-+        RETURN_ERROR(
-+                MAJOR, E_INVALID_VALUE,
-+                ("fifoBufs.num has to be divisible by %d", BMI_FIFO_UNITS));
-+
-+#ifdef FM_QMI_NO_DEQ_OPTIONS_SUPPORT
-+    if (p_FmPort->fmRevInfo.majorRev == 4)
-+    if (p_FmPort->p_FmPortDriverParam->deqPrefetchOption != DEFAULT_notSupported)
-+    /* this is an indication that user called config for this mode which is not supported in this integration */
-+    RETURN_ERROR(MAJOR, E_INVALID_OPERATION, ("deqPrefetchOption"));
-+#endif /* FM_QMI_NO_DEQ_OPTIONS_SUPPORT */
-+
-+    return E_OK;
-+}
-+
-+static t_Error VerifySizeOfFifo(t_FmPort *p_FmPort)
-+{
-+    uint32_t minFifoSizeRequired = 0, optFifoSizeForB2B = 0;
-+
-+    /*************************/
-+    /*    TX PORTS           */
-+    /*************************/
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_TX)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_TX_10G))
-+    {
-+        minFifoSizeRequired =
-+                (uint32_t)(ROUND_UP(p_FmPort->maxFrameLength, BMI_FIFO_UNITS)
-+                        + (3 * BMI_FIFO_UNITS));
-+        if (!p_FmPort->imEn)
-+            minFifoSizeRequired +=
-+                    p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth
-+                            * BMI_FIFO_UNITS;
-+
-+        optFifoSizeForB2B = minFifoSizeRequired;
-+
-+        /* Add some margin for back-to-back capability to improve performance,
-+         allows the hardware to pipeline new frame dma while the previous
-+         frame not yet transmitted. */
-+        if (p_FmPort->portType == e_FM_PORT_TYPE_TX_10G)
-+            optFifoSizeForB2B += 3 * BMI_FIFO_UNITS;
-+        else
-+            optFifoSizeForB2B += 2 * BMI_FIFO_UNITS;
-+    }
-+
-+    /*************************/
-+    /*    RX IM PORTS        */
-+    /*************************/
-+    else
-+        if (((p_FmPort->portType == e_FM_PORT_TYPE_RX)
-+                || (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G))
-+                && p_FmPort->imEn)
-+        {
-+            optFifoSizeForB2B =
-+                    minFifoSizeRequired =
-+                            (uint32_t)(ROUND_UP(p_FmPort->maxFrameLength, BMI_FIFO_UNITS)
-+                                    + (4 * BMI_FIFO_UNITS));
-+        }
-+
-+        /*************************/
-+        /*    RX non-IM PORTS    */
-+        /*************************/
-+        else
-+            if (((p_FmPort->portType == e_FM_PORT_TYPE_RX)
-+                    || (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G))
-+                    && !p_FmPort->imEn)
-+            {
-+                if (p_FmPort->fmRevInfo.majorRev == 4)
-+                {
-+                    if (p_FmPort->rxPoolsParams.numOfPools == 1)
-+                        minFifoSizeRequired = 8 * BMI_FIFO_UNITS;
-+                    else
-+                        minFifoSizeRequired =
-+                                (uint32_t)(ROUND_UP(p_FmPort->rxPoolsParams.secondLargestBufSize, BMI_FIFO_UNITS)
-+                                        + (7 * BMI_FIFO_UNITS));
-+                }
-+                else
-+                {
-+#if (DPAA_VERSION >= 11)
-+                    minFifoSizeRequired =
-+                            (uint32_t)(ROUND_UP(p_FmPort->maxFrameLength, BMI_FIFO_UNITS)
-+                                    + (5 * BMI_FIFO_UNITS));
-+                    /* 4 according to spec + 1 for FOF>0 */
-+#else
-+                    minFifoSizeRequired = (uint32_t)
-+                    (ROUND_UP(MIN(p_FmPort->maxFrameLength, p_FmPort->rxPoolsParams.largestBufSize), BMI_FIFO_UNITS)
-+                            + (7*BMI_FIFO_UNITS));
-+#endif /* (DPAA_VERSION >= 11) */
-+                }
-+
-+                optFifoSizeForB2B = minFifoSizeRequired;
-+
-+                /* Add some margin for back-to-back capability to improve performance,
-+                 allows the hardware to pipeline new frame dma while the previous
-+                 frame not yet transmitted. */
-+                if (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G)
-+                    optFifoSizeForB2B += 8 * BMI_FIFO_UNITS;
-+                else
-+                    optFifoSizeForB2B += 3 * BMI_FIFO_UNITS;
-+            }
-+
-+            /* For O/H ports, check fifo size and update if necessary */
-+            else
-+                if ((p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+                        || (p_FmPort->portType == e_FM_PORT_TYPE_OH_HOST_COMMAND))
-+                {
-+#if (DPAA_VERSION >= 11)
-+                    optFifoSizeForB2B =
-+                            minFifoSizeRequired =
-+                                    (uint32_t)(ROUND_UP(p_FmPort->maxFrameLength, BMI_FIFO_UNITS)
-+                                            + ((p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth
-+                                                    + 5) * BMI_FIFO_UNITS));
-+                    /* 4 according to spec + 1 for FOF>0 */
-+#else
-+                    optFifoSizeForB2B = minFifoSizeRequired = (uint32_t)((p_FmPort->tasks.num + 2) * BMI_FIFO_UNITS);
-+#endif /* (DPAA_VERSION >= 11) */
-+                }
-+
-+    ASSERT_COND(minFifoSizeRequired > 0);
-+    ASSERT_COND(optFifoSizeForB2B >= minFifoSizeRequired);
-+
-+    /* Verify the size  */
-+    if (p_FmPort->fifoBufs.num < minFifoSizeRequired)
-+        DBG(INFO,
-+           ("FIFO size is %d and should be enlarged to %d bytes",p_FmPort->fifoBufs.num, minFifoSizeRequired));
-+    else if (p_FmPort->fifoBufs.num < optFifoSizeForB2B)
-+        DBG(INFO,
-+	    ("For back-to-back frames processing, FIFO size is %d and needs to enlarge to %d bytes", p_FmPort->fifoBufs.num, optFifoSizeForB2B));
-+
-+    return E_OK;
-+}
-+
-+static void FmPortDriverParamFree(t_FmPort *p_FmPort)
-+{
-+    if (p_FmPort->p_FmPortDriverParam)
-+    {
-+        XX_Free(p_FmPort->p_FmPortDriverParam);
-+        p_FmPort->p_FmPortDriverParam = NULL;
-+    }
-+}
-+
-+static t_Error SetExtBufferPools(t_FmPort *p_FmPort)
-+{
-+    t_FmExtPools *p_ExtBufPools = &p_FmPort->p_FmPortDriverParam->extBufPools;
-+    t_FmBufPoolDepletion *p_BufPoolDepletion =
-+            &p_FmPort->p_FmPortDriverParam->bufPoolDepletion;
-+    uint8_t orderedArray[FM_PORT_MAX_NUM_OF_EXT_POOLS];
-+    uint16_t sizesArray[BM_MAX_NUM_OF_POOLS];
-+    int i = 0, j = 0, err;
-+    struct fman_port_bpools bpools;
-+
-+    memset(&orderedArray, 0, sizeof(uint8_t) * FM_PORT_MAX_NUM_OF_EXT_POOLS);
-+    memset(&sizesArray, 0, sizeof(uint16_t) * BM_MAX_NUM_OF_POOLS);
-+    memcpy(&p_FmPort->extBufPools, p_ExtBufPools, sizeof(t_FmExtPools));
-+
-+    FmSpSetBufPoolsInAscOrderOfBufSizes(p_ExtBufPools, orderedArray,
-+                                        sizesArray);
-+
-+    /* Prepare flibs bpools structure */
-+    memset(&bpools, 0, sizeof(struct fman_port_bpools));
-+    bpools.count = p_ExtBufPools->numOfPoolsUsed;
-+    bpools.counters_enable = TRUE;
-+    for (i = 0; i < p_ExtBufPools->numOfPoolsUsed; i++)
-+    {
-+        bpools.bpool[i].bpid = orderedArray[i];
-+        bpools.bpool[i].size = sizesArray[orderedArray[i]];
-+        /* functionality available only for some derivatives (limited by config) */
-+        if (p_FmPort->p_FmPortDriverParam->p_BackupBmPools)
-+            for (j = 0;
-+                    j
-+                            < p_FmPort->p_FmPortDriverParam->p_BackupBmPools->numOfBackupPools;
-+                    j++)
-+                if (orderedArray[i]
-+                        == p_FmPort->p_FmPortDriverParam->p_BackupBmPools->poolIds[j])
-+                {
-+                    bpools.bpool[i].is_backup = TRUE;
-+                    break;
-+                }
-+    }
-+
-+    /* save pools parameters for later use */
-+    p_FmPort->rxPoolsParams.numOfPools = p_ExtBufPools->numOfPoolsUsed;
-+    p_FmPort->rxPoolsParams.largestBufSize =
-+            sizesArray[orderedArray[p_ExtBufPools->numOfPoolsUsed - 1]];
-+    p_FmPort->rxPoolsParams.secondLargestBufSize =
-+            sizesArray[orderedArray[p_ExtBufPools->numOfPoolsUsed - 2]];
-+
-+    /* FMBM_RMPD reg. - pool depletion */
-+    if (p_BufPoolDepletion->poolsGrpModeEnable)
-+    {
-+        bpools.grp_bp_depleted_num = p_BufPoolDepletion->numOfPools;
-+        for (i = 0; i < BM_MAX_NUM_OF_POOLS; i++)
-+        {
-+            if (p_BufPoolDepletion->poolsToConsider[i])
-+            {
-+                for (j = 0; j < p_ExtBufPools->numOfPoolsUsed; j++)
-+                {
-+                    if (i == orderedArray[j])
-+                    {
-+                        bpools.bpool[j].grp_bp_depleted = TRUE;
-+                        break;
-+                    }
-+                }
-+            }
-+        }
-+    }
-+
-+    if (p_BufPoolDepletion->singlePoolModeEnable)
-+    {
-+        for (i = 0; i < BM_MAX_NUM_OF_POOLS; i++)
-+        {
-+            if (p_BufPoolDepletion->poolsToConsiderForSingleMode[i])
-+            {
-+                for (j = 0; j < p_ExtBufPools->numOfPoolsUsed; j++)
-+                {
-+                    if (i == orderedArray[j])
-+                    {
-+                        bpools.bpool[j].single_bp_depleted = TRUE;
-+                        break;
-+                    }
-+                }
-+            }
-+        }
-+    }
-+
-+#if (DPAA_VERSION >= 11)
-+    /* fill QbbPEV */
-+    if (p_BufPoolDepletion->poolsGrpModeEnable
-+            || p_BufPoolDepletion->singlePoolModeEnable)
-+    {
-+        for (i = 0; i < FM_MAX_NUM_OF_PFC_PRIORITIES; i++)
-+        {
-+            if (p_BufPoolDepletion->pfcPrioritiesEn[i] == TRUE)
-+            {
-+                bpools.bpool[i].pfc_priorities_en = TRUE;
-+            }
-+        }
-+    }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    /* Issue flibs function */
-+    err = fman_port_set_bpools(&p_FmPort->port, &bpools);
-+    if (err != 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fman_port_set_bpools"));
-+
-+    if (p_FmPort->p_FmPortDriverParam->p_BackupBmPools)
-+        XX_Free(p_FmPort->p_FmPortDriverParam->p_BackupBmPools);
-+
-+    return E_OK;
-+}
-+
-+static t_Error ClearPerfCnts(t_FmPort *p_FmPort)
-+{
-+    if (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+        FM_PORT_ModifyCounter(p_FmPort, e_FM_PORT_COUNTERS_QUEUE_UTIL, 0);
-+    FM_PORT_ModifyCounter(p_FmPort, e_FM_PORT_COUNTERS_TASK_UTIL, 0);
-+    FM_PORT_ModifyCounter(p_FmPort, e_FM_PORT_COUNTERS_DMA_UTIL, 0);
-+    FM_PORT_ModifyCounter(p_FmPort, e_FM_PORT_COUNTERS_FIFO_UTIL, 0);
-+    return E_OK;
-+}
-+
-+static t_Error InitLowLevelDriver(t_FmPort *p_FmPort)
-+{
-+    t_FmPortDriverParam *p_DriverParams = p_FmPort->p_FmPortDriverParam;
-+    struct fman_port_params portParams;
-+    uint32_t tmpVal;
-+    t_Error err;
-+
-+    /* Set up flibs parameters and issue init function */
-+
-+    memset(&portParams, 0, sizeof(struct fman_port_params));
-+    portParams.discard_mask = p_DriverParams->errorsToDiscard;
-+    portParams.dflt_fqid = p_DriverParams->dfltFqid;
-+    portParams.err_fqid = p_DriverParams->errFqid;
-+    portParams.deq_sp = p_DriverParams->deqSubPortal;
-+    portParams.dont_release_buf = p_DriverParams->dontReleaseBuf;
-+    switch (p_FmPort->portType)
-+    {
-+        case (e_FM_PORT_TYPE_RX_10G):
-+        case (e_FM_PORT_TYPE_RX):
-+            portParams.err_mask = (RX_ERRS_TO_ENQ & ~portParams.discard_mask);
-+            if (!p_FmPort->imEn)
-+            {
-+                if (p_DriverParams->forwardReuseIntContext)
-+                    p_DriverParams->dfltCfg.rx_fd_bits =
-+                            (uint8_t)(BMI_PORT_RFNE_FRWD_RPD >> 24);
-+            }
-+            break;
-+
-+        case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+            portParams.err_mask = (OP_ERRS_TO_ENQ & ~portParams.discard_mask);
-+            break;
-+            break;
-+
-+        default:
-+            break;
-+    }
-+
-+    tmpVal =
-+            (uint32_t)(
-+                    (p_FmPort->internalBufferOffset % OFFSET_UNITS) ? (p_FmPort->internalBufferOffset
-+                            / OFFSET_UNITS + 1) :
-+                            (p_FmPort->internalBufferOffset / OFFSET_UNITS));
-+    p_FmPort->internalBufferOffset = (uint8_t)(tmpVal * OFFSET_UNITS);
-+    p_DriverParams->dfltCfg.int_buf_start_margin =
-+            p_FmPort->internalBufferOffset;
-+
-+    p_DriverParams->dfltCfg.ext_buf_start_margin =
-+            p_DriverParams->bufMargins.startMargins;
-+    p_DriverParams->dfltCfg.ext_buf_end_margin =
-+            p_DriverParams->bufMargins.endMargins;
-+
-+    p_DriverParams->dfltCfg.ic_ext_offset =
-+            p_DriverParams->intContext.extBufOffset;
-+    p_DriverParams->dfltCfg.ic_int_offset =
-+            p_DriverParams->intContext.intContextOffset;
-+    p_DriverParams->dfltCfg.ic_size = p_DriverParams->intContext.size;
-+
-+    p_DriverParams->dfltCfg.stats_counters_enable = TRUE;
-+    p_DriverParams->dfltCfg.perf_counters_enable = TRUE;
-+    p_DriverParams->dfltCfg.queue_counters_enable = TRUE;
-+
-+    p_DriverParams->dfltCfg.perf_cnt_params.task_val =
-+            (uint8_t)p_FmPort->tasks.num;
-+    if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING ||
-+    p_FmPort->portType == e_FM_PORT_TYPE_OH_HOST_COMMAND)p_DriverParams->dfltCfg.perf_cnt_params.queue_val = 0;
-+    else
-+    p_DriverParams->dfltCfg.perf_cnt_params.queue_val = 1;
-+    p_DriverParams->dfltCfg.perf_cnt_params.dma_val =
-+            (uint8_t)p_FmPort->openDmas.num;
-+    p_DriverParams->dfltCfg.perf_cnt_params.fifo_val = p_FmPort->fifoBufs.num;
-+
-+    if (0
-+            != fman_port_init(&p_FmPort->port, &p_DriverParams->dfltCfg,
-+                              &portParams))
-+        RETURN_ERROR(MAJOR, E_NO_DEVICE, ("fman_port_init"));
-+
-+    if (p_FmPort->imEn && ((err = FmPortImInit(p_FmPort)) != E_OK))
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    else
-+    {
-+        //  from QMIInit
-+        if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+                && (p_FmPort->portType != e_FM_PORT_TYPE_RX))
-+        {
-+            if (p_DriverParams->deqPrefetchOption == e_FM_PORT_DEQ_NO_PREFETCH)
-+                FmSetPortPreFetchConfiguration(p_FmPort->h_Fm, p_FmPort->portId,
-+                                               FALSE);
-+            else
-+                FmSetPortPreFetchConfiguration(p_FmPort->h_Fm, p_FmPort->portId,
-+                                               TRUE);
-+        }
-+    }
-+    /* The code bellow is a trick so the FM will not release the buffer
-+     to BM nor will try to enqueue the frame to QM */
-+    if (((p_FmPort->portType == e_FM_PORT_TYPE_TX_10G)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_TX)) && (!p_FmPort->imEn))
-+    {
-+        if (!p_DriverParams->dfltFqid && p_DriverParams->dontReleaseBuf)
-+        {
-+            /* override fmbm_tcfqid 0 with a false non-0 value. This will force FM to
-+             * act according to tfene. Otherwise, if fmbm_tcfqid is 0 the FM will release
-+             * buffers to BM regardless of fmbm_tfene
-+             */
-+            WRITE_UINT32(p_FmPort->port.bmi_regs->tx.fmbm_tcfqid, 0xFFFFFF);
-+            WRITE_UINT32(p_FmPort->port.bmi_regs->tx.fmbm_tfene,
-+                         NIA_ENG_BMI | NIA_BMI_AC_TX_RELEASE);
-+        }
-+    }
-+
-+    return E_OK;
-+}
-+
-+static bool CheckRxBmiCounter(t_FmPort *p_FmPort, e_FmPortCounters counter)
-+{
-+    UNUSED(p_FmPort);
-+
-+    switch (counter)
-+    {
-+        case (e_FM_PORT_COUNTERS_CYCLE):
-+        case (e_FM_PORT_COUNTERS_TASK_UTIL):
-+        case (e_FM_PORT_COUNTERS_QUEUE_UTIL):
-+        case (e_FM_PORT_COUNTERS_DMA_UTIL):
-+        case (e_FM_PORT_COUNTERS_FIFO_UTIL):
-+        case (e_FM_PORT_COUNTERS_RX_PAUSE_ACTIVATION):
-+        case (e_FM_PORT_COUNTERS_FRAME):
-+        case (e_FM_PORT_COUNTERS_DISCARD_FRAME):
-+        case (e_FM_PORT_COUNTERS_RX_BAD_FRAME):
-+        case (e_FM_PORT_COUNTERS_RX_LARGE_FRAME):
-+        case (e_FM_PORT_COUNTERS_RX_FILTER_FRAME):
-+        case (e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR):
-+        case (e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD):
-+        case (e_FM_PORT_COUNTERS_DEALLOC_BUF):
-+        case (e_FM_PORT_COUNTERS_PREPARE_TO_ENQUEUE_COUNTER):
-+            return TRUE;
-+        default:
-+            return FALSE;
-+    }
-+}
-+
-+static bool CheckTxBmiCounter(t_FmPort *p_FmPort, e_FmPortCounters counter)
-+{
-+    UNUSED(p_FmPort);
-+
-+    switch (counter)
-+    {
-+        case (e_FM_PORT_COUNTERS_CYCLE):
-+        case (e_FM_PORT_COUNTERS_TASK_UTIL):
-+        case (e_FM_PORT_COUNTERS_QUEUE_UTIL):
-+        case (e_FM_PORT_COUNTERS_DMA_UTIL):
-+        case (e_FM_PORT_COUNTERS_FIFO_UTIL):
-+        case (e_FM_PORT_COUNTERS_FRAME):
-+        case (e_FM_PORT_COUNTERS_DISCARD_FRAME):
-+        case (e_FM_PORT_COUNTERS_LENGTH_ERR):
-+        case (e_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT):
-+        case (e_FM_PORT_COUNTERS_DEALLOC_BUF):
-+            return TRUE;
-+        default:
-+            return FALSE;
-+    }
-+}
-+
-+static bool CheckOhBmiCounter(t_FmPort *p_FmPort, e_FmPortCounters counter)
-+{
-+    switch (counter)
-+    {
-+        case (e_FM_PORT_COUNTERS_CYCLE):
-+        case (e_FM_PORT_COUNTERS_TASK_UTIL):
-+        case (e_FM_PORT_COUNTERS_DMA_UTIL):
-+        case (e_FM_PORT_COUNTERS_FIFO_UTIL):
-+        case (e_FM_PORT_COUNTERS_FRAME):
-+        case (e_FM_PORT_COUNTERS_DISCARD_FRAME):
-+        case (e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR):
-+        case (e_FM_PORT_COUNTERS_WRED_DISCARD):
-+        case (e_FM_PORT_COUNTERS_LENGTH_ERR):
-+        case (e_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT):
-+        case (e_FM_PORT_COUNTERS_DEALLOC_BUF):
-+            return TRUE;
-+        case (e_FM_PORT_COUNTERS_RX_FILTER_FRAME):
-+            if (p_FmPort->portType == e_FM_PORT_TYPE_OH_HOST_COMMAND)
-+                return FALSE;
-+            else
-+                return TRUE;
-+        default:
-+            return FALSE;
-+    }
-+}
-+
-+static t_Error BmiPortCheckAndGetCounterType(
-+        t_FmPort *p_FmPort, e_FmPortCounters counter,
-+        enum fman_port_stats_counters *p_StatsType,
-+        enum fman_port_perf_counters *p_PerfType, bool *p_IsStats)
-+{
-+    volatile uint32_t *p_Reg;
-+    bool isValid;
-+
-+    switch (p_FmPort->portType)
-+    {
-+        case (e_FM_PORT_TYPE_RX_10G):
-+        case (e_FM_PORT_TYPE_RX):
-+            p_Reg = &p_FmPort->port.bmi_regs->rx.fmbm_rstc;
-+            isValid = CheckRxBmiCounter(p_FmPort, counter);
-+            break;
-+        case (e_FM_PORT_TYPE_TX_10G):
-+        case (e_FM_PORT_TYPE_TX):
-+            p_Reg = &p_FmPort->port.bmi_regs->tx.fmbm_tstc;
-+            isValid = CheckTxBmiCounter(p_FmPort, counter);
-+            break;
-+        case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+        case (e_FM_PORT_TYPE_OH_HOST_COMMAND):
-+            p_Reg = &p_FmPort->port.bmi_regs->oh.fmbm_ostc;
-+            isValid = CheckOhBmiCounter(p_FmPort, counter);
-+            break;
-+        default:
-+            RETURN_ERROR(MINOR, E_INVALID_STATE, ("Unsupported port type"));
-+    }
-+
-+    if (!isValid)
-+        RETURN_ERROR(MINOR, E_INVALID_STATE,
-+                     ("Requested counter is not available for this port type"));
-+
-+    /* check that counters are enabled */
-+    switch (counter)
-+    {
-+        case (e_FM_PORT_COUNTERS_CYCLE):
-+        case (e_FM_PORT_COUNTERS_TASK_UTIL):
-+        case (e_FM_PORT_COUNTERS_QUEUE_UTIL):
-+        case (e_FM_PORT_COUNTERS_DMA_UTIL):
-+        case (e_FM_PORT_COUNTERS_FIFO_UTIL):
-+        case (e_FM_PORT_COUNTERS_RX_PAUSE_ACTIVATION):
-+            /* performance counters - may be read when disabled */
-+            *p_IsStats = FALSE;
-+            break;
-+        case (e_FM_PORT_COUNTERS_FRAME):
-+        case (e_FM_PORT_COUNTERS_DISCARD_FRAME):
-+        case (e_FM_PORT_COUNTERS_DEALLOC_BUF):
-+        case (e_FM_PORT_COUNTERS_RX_BAD_FRAME):
-+        case (e_FM_PORT_COUNTERS_RX_LARGE_FRAME):
-+        case (e_FM_PORT_COUNTERS_RX_FILTER_FRAME):
-+        case (e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR):
-+        case (e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD):
-+        case (e_FM_PORT_COUNTERS_LENGTH_ERR):
-+        case (e_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT):
-+        case (e_FM_PORT_COUNTERS_WRED_DISCARD):
-+            *p_IsStats = TRUE;
-+            if (!(GET_UINT32(*p_Reg) & BMI_COUNTERS_EN))
-+                RETURN_ERROR(MINOR, E_INVALID_STATE,
-+                             ("Requested counter was not enabled"));
-+            break;
-+        default:
-+            break;
-+    }
-+
-+    /* Set counter */
-+    switch (counter)
-+    {
-+        case (e_FM_PORT_COUNTERS_CYCLE):
-+            *p_PerfType = E_FMAN_PORT_PERF_CNT_CYCLE;
-+            break;
-+        case (e_FM_PORT_COUNTERS_TASK_UTIL):
-+            *p_PerfType = E_FMAN_PORT_PERF_CNT_TASK_UTIL;
-+            break;
-+        case (e_FM_PORT_COUNTERS_QUEUE_UTIL):
-+            *p_PerfType = E_FMAN_PORT_PERF_CNT_QUEUE_UTIL;
-+            break;
-+        case (e_FM_PORT_COUNTERS_DMA_UTIL):
-+            *p_PerfType = E_FMAN_PORT_PERF_CNT_DMA_UTIL;
-+            break;
-+        case (e_FM_PORT_COUNTERS_FIFO_UTIL):
-+            *p_PerfType = E_FMAN_PORT_PERF_CNT_FIFO_UTIL;
-+            break;
-+        case (e_FM_PORT_COUNTERS_RX_PAUSE_ACTIVATION):
-+            *p_PerfType = E_FMAN_PORT_PERF_CNT_RX_PAUSE;
-+            break;
-+        case (e_FM_PORT_COUNTERS_FRAME):
-+            *p_StatsType = E_FMAN_PORT_STATS_CNT_FRAME;
-+            break;
-+        case (e_FM_PORT_COUNTERS_DISCARD_FRAME):
-+            *p_StatsType = E_FMAN_PORT_STATS_CNT_DISCARD;
-+            break;
-+        case (e_FM_PORT_COUNTERS_DEALLOC_BUF):
-+            *p_StatsType = E_FMAN_PORT_STATS_CNT_DEALLOC_BUF;
-+            break;
-+        case (e_FM_PORT_COUNTERS_RX_BAD_FRAME):
-+            *p_StatsType = E_FMAN_PORT_STATS_CNT_RX_BAD_FRAME;
-+            break;
-+        case (e_FM_PORT_COUNTERS_RX_LARGE_FRAME):
-+            *p_StatsType = E_FMAN_PORT_STATS_CNT_RX_LARGE_FRAME;
-+            break;
-+        case (e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD):
-+            *p_StatsType = E_FMAN_PORT_STATS_CNT_RX_OUT_OF_BUF;
-+            break;
-+        case (e_FM_PORT_COUNTERS_RX_FILTER_FRAME):
-+            *p_StatsType = E_FMAN_PORT_STATS_CNT_FILTERED_FRAME;
-+            break;
-+        case (e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR):
-+            *p_StatsType = E_FMAN_PORT_STATS_CNT_DMA_ERR;
-+            break;
-+        case (e_FM_PORT_COUNTERS_WRED_DISCARD):
-+            *p_StatsType = E_FMAN_PORT_STATS_CNT_WRED_DISCARD;
-+            break;
-+        case (e_FM_PORT_COUNTERS_LENGTH_ERR):
-+            *p_StatsType = E_FMAN_PORT_STATS_CNT_LEN_ERR;
-+            break;
-+        case (e_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT):
-+            *p_StatsType = E_FMAN_PORT_STATS_CNT_UNSUPPORTED_FORMAT;
-+            break;
-+        default:
-+            break;
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error AdditionalPrsParams(t_FmPort *p_FmPort,
-+                                   t_FmPcdPrsAdditionalHdrParams *p_HdrParams,
-+                                   uint32_t *p_SoftSeqAttachReg)
-+{
-+    uint8_t hdrNum, Ipv4HdrNum;
-+    u_FmPcdHdrPrsOpts *p_prsOpts;
-+    uint32_t tmpReg = *p_SoftSeqAttachReg, tmpPrsOffset;
-+
-+    if (IS_PRIVATE_HEADER(p_HdrParams->hdr)
-+            || IS_SPECIAL_HEADER(p_HdrParams->hdr))
-+        RETURN_ERROR(
-+                MAJOR, E_NOT_SUPPORTED,
-+                ("No additional parameters for private or special headers."));
-+
-+    if (p_HdrParams->errDisable)
-+        tmpReg |= PRS_HDR_ERROR_DIS;
-+
-+    /* Set parser options */
-+    if (p_HdrParams->usePrsOpts)
-+    {
-+        p_prsOpts = &p_HdrParams->prsOpts;
-+        switch (p_HdrParams->hdr)
-+        {
-+            case (HEADER_TYPE_MPLS):
-+                if (p_prsOpts->mplsPrsOptions.labelInterpretationEnable)
-+                    tmpReg |= PRS_HDR_MPLS_LBL_INTER_EN;
-+                hdrNum = GetPrsHdrNum(p_prsOpts->mplsPrsOptions.nextParse);
-+                if (hdrNum == ILLEGAL_HDR_NUM)
-+                    RETURN_ERROR(MAJOR, E_INVALID_VALUE, NO_MSG);
-+                Ipv4HdrNum = GetPrsHdrNum(HEADER_TYPE_IPv4);
-+                if (hdrNum < Ipv4HdrNum)
-+                    RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                                 ("Header must be equal or higher than IPv4"));
-+                tmpReg |= ((uint32_t)hdrNum * PRS_HDR_ENTRY_SIZE)
-+                        << PRS_HDR_MPLS_NEXT_HDR_SHIFT;
-+                break;
-+            case (HEADER_TYPE_PPPoE):
-+                if (p_prsOpts->pppoePrsOptions.enableMTUCheck)
-+                    tmpReg |= PRS_HDR_PPPOE_MTU_CHECK_EN;
-+                break;
-+            case (HEADER_TYPE_IPv6):
-+                if (p_prsOpts->ipv6PrsOptions.routingHdrEnable)
-+                    tmpReg |= PRS_HDR_IPV6_ROUTE_HDR_EN;
-+                break;
-+            case (HEADER_TYPE_TCP):
-+                if (p_prsOpts->tcpPrsOptions.padIgnoreChecksum)
-+                    tmpReg |= PRS_HDR_TCP_PAD_REMOVAL;
-+                else
-+                    tmpReg &= ~PRS_HDR_TCP_PAD_REMOVAL;
-+                break;
-+            case (HEADER_TYPE_UDP):
-+                if (p_prsOpts->udpPrsOptions.padIgnoreChecksum)
-+                    tmpReg |= PRS_HDR_UDP_PAD_REMOVAL;
-+                else
-+                    tmpReg &= ~PRS_HDR_UDP_PAD_REMOVAL;
-+                break;
-+            default:
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Invalid header"));
-+        }
-+    }
-+
-+    /* set software parsing (address is divided in 2 since parser uses 2 byte access. */
-+    if (p_HdrParams->swPrsEnable)
-+    {
-+        tmpPrsOffset = FmPcdGetSwPrsOffset(p_FmPort->h_FmPcd, p_HdrParams->hdr,
-+                                           p_HdrParams->indexPerHdr);
-+        if (tmpPrsOffset == ILLEGAL_BASE)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, NO_MSG);
-+        tmpReg |= (PRS_HDR_SW_PRS_EN | tmpPrsOffset);
-+    }
-+    *p_SoftSeqAttachReg = tmpReg;
-+
-+    return E_OK;
-+}
-+
-+static uint32_t GetPortSchemeBindParams(
-+        t_Handle h_FmPort, t_FmPcdKgInterModuleBindPortToSchemes *p_SchemeBind)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    uint32_t walking1Mask = 0x80000000, tmp;
-+    uint8_t idx = 0;
-+
-+    p_SchemeBind->netEnvId = p_FmPort->netEnvId;
-+    p_SchemeBind->hardwarePortId = p_FmPort->hardwarePortId;
-+    p_SchemeBind->useClsPlan = p_FmPort->useClsPlan;
-+    p_SchemeBind->numOfSchemes = 0;
-+    tmp = p_FmPort->schemesPerPortVector;
-+    if (tmp)
-+    {
-+        while (tmp)
-+        {
-+            if (tmp & walking1Mask)
-+            {
-+                p_SchemeBind->schemesIds[p_SchemeBind->numOfSchemes] = idx;
-+                p_SchemeBind->numOfSchemes++;
-+                tmp &= ~walking1Mask;
-+            }
-+            walking1Mask >>= 1;
-+            idx++;
-+        }
-+    }
-+
-+    return tmp;
-+}
-+
-+static void FmPortCheckNApplyMacsec(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    volatile uint32_t *p_BmiCfgReg = NULL;
-+    uint32_t macsecEn = BMI_PORT_CFG_EN_MACSEC;
-+    uint32_t lcv, walking1Mask = 0x80000000;
-+    uint8_t cnt = 0;
-+
-+    ASSERT_COND(p_FmPort);
-+    ASSERT_COND(p_FmPort->h_FmPcd);
-+    ASSERT_COND(!p_FmPort->p_FmPortDriverParam);
-+
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX))
-+        return;
-+
-+    p_BmiCfgReg = &p_FmPort->port.bmi_regs->rx.fmbm_rcfg;
-+    /* get LCV for MACSEC */
-+    if ((lcv = FmPcdGetMacsecLcv(p_FmPort->h_FmPcd, p_FmPort->netEnvId))
-+                    != 0)
-+    {
-+        while (!(lcv & walking1Mask))
-+        {
-+            cnt++;
-+            walking1Mask >>= 1;
-+        }
-+
-+        macsecEn |= (uint32_t)cnt << BMI_PORT_CFG_MS_SEL_SHIFT;
-+        WRITE_UINT32(*p_BmiCfgReg, GET_UINT32(*p_BmiCfgReg) | macsecEn);
-+    }
-+}
-+
-+static t_Error SetPcd(t_FmPort *p_FmPort, t_FmPortPcdParams *p_PcdParams)
-+{
-+    t_Error err = E_OK;
-+    uint32_t tmpReg;
-+    volatile uint32_t *p_BmiNia = NULL;
-+    volatile uint32_t *p_BmiPrsNia = NULL;
-+    volatile uint32_t *p_BmiPrsStartOffset = NULL;
-+    volatile uint32_t *p_BmiInitPrsResult = NULL;
-+    volatile uint32_t *p_BmiCcBase = NULL;
-+    uint16_t hdrNum, L3HdrNum, greHdrNum;
-+    int i;
-+    bool isEmptyClsPlanGrp;
-+    uint32_t tmpHxs[FM_PCD_PRS_NUM_OF_HDRS];
-+    uint16_t absoluteProfileId;
-+    uint8_t physicalSchemeId;
-+    uint32_t ccTreePhysOffset;
-+    t_FmPcdKgInterModuleBindPortToSchemes schemeBind;
-+    uint32_t initialSwPrs = 0;
-+
-+    ASSERT_COND(p_FmPort);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    if (p_FmPort->imEn)
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for non-independant mode ports only"));
-+
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for Rx and offline parsing ports only"));
-+
-+    p_FmPort->netEnvId = FmPcdGetNetEnvId(p_PcdParams->h_NetEnv);
-+
-+    p_FmPort->pcdEngines = 0;
-+
-+    /* initialize p_FmPort->pcdEngines field in port's structure */
-+    switch (p_PcdParams->pcdSupport)
-+    {
-+        case (e_FM_PORT_PCD_SUPPORT_NONE):
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_STATE,
-+                    ("No PCD configuration required if e_FM_PORT_PCD_SUPPORT_NONE selected"));
-+        case (e_FM_PORT_PCD_SUPPORT_PRS_ONLY):
-+            p_FmPort->pcdEngines |= FM_PCD_PRS;
-+            break;
-+        case (e_FM_PORT_PCD_SUPPORT_PLCR_ONLY):
-+            p_FmPort->pcdEngines |= FM_PCD_PLCR;
-+            break;
-+        case (e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR):
-+            p_FmPort->pcdEngines |= FM_PCD_PRS;
-+            p_FmPort->pcdEngines |= FM_PCD_PLCR;
-+            break;
-+        case (e_FM_PORT_PCD_SUPPORT_PRS_AND_KG):
-+            p_FmPort->pcdEngines |= FM_PCD_PRS;
-+            p_FmPort->pcdEngines |= FM_PCD_KG;
-+            break;
-+        case (e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC):
-+            p_FmPort->pcdEngines |= FM_PCD_PRS;
-+            p_FmPort->pcdEngines |= FM_PCD_CC;
-+            p_FmPort->pcdEngines |= FM_PCD_KG;
-+            break;
-+        case (e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR):
-+            p_FmPort->pcdEngines |= FM_PCD_PRS;
-+            p_FmPort->pcdEngines |= FM_PCD_KG;
-+            p_FmPort->pcdEngines |= FM_PCD_CC;
-+            p_FmPort->pcdEngines |= FM_PCD_PLCR;
-+            break;
-+        case (e_FM_PORT_PCD_SUPPORT_PRS_AND_CC):
-+            p_FmPort->pcdEngines |= FM_PCD_PRS;
-+            p_FmPort->pcdEngines |= FM_PCD_CC;
-+            break;
-+        case (e_FM_PORT_PCD_SUPPORT_PRS_AND_CC_AND_PLCR):
-+            p_FmPort->pcdEngines |= FM_PCD_PRS;
-+            p_FmPort->pcdEngines |= FM_PCD_CC;
-+            p_FmPort->pcdEngines |= FM_PCD_PLCR;
-+            break;
-+        case (e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR):
-+            p_FmPort->pcdEngines |= FM_PCD_PRS;
-+            p_FmPort->pcdEngines |= FM_PCD_KG;
-+            p_FmPort->pcdEngines |= FM_PCD_PLCR;
-+            break;
-+        case (e_FM_PORT_PCD_SUPPORT_CC_ONLY):
-+            p_FmPort->pcdEngines |= FM_PCD_CC;
-+            break;
-+#ifdef FM_CAPWAP_SUPPORT
-+            case (e_FM_PORT_PCD_SUPPORT_CC_AND_KG):
-+            p_FmPort->pcdEngines |= FM_PCD_CC;
-+            p_FmPort->pcdEngines |= FM_PCD_KG;
-+            break;
-+            case (e_FM_PORT_PCD_SUPPORT_CC_AND_KG_AND_PLCR):
-+            p_FmPort->pcdEngines |= FM_PCD_CC;
-+            p_FmPort->pcdEngines |= FM_PCD_KG;
-+            p_FmPort->pcdEngines |= FM_PCD_PLCR;
-+            break;
-+#endif /* FM_CAPWAP_SUPPORT */
-+
-+        default:
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("invalid pcdSupport"));
-+    }
-+
-+    if ((p_FmPort->pcdEngines & FM_PCD_PRS)
-+            && (p_PcdParams->p_PrsParams->numOfHdrsWithAdditionalParams
-+                    > FM_PCD_PRS_NUM_OF_HDRS))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("Port parser numOfHdrsWithAdditionalParams may not exceed %d", FM_PCD_PRS_NUM_OF_HDRS));
-+
-+    /* check that parameters exist for each and only each defined engine */
-+    if ((!!(p_FmPort->pcdEngines & FM_PCD_PRS) != !!p_PcdParams->p_PrsParams)
-+            || (!!(p_FmPort->pcdEngines & FM_PCD_KG)
-+                    != !!p_PcdParams->p_KgParams)
-+            || (!!(p_FmPort->pcdEngines & FM_PCD_CC)
-+                    != !!p_PcdParams->p_CcParams))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_STATE,
-+                ("PCD initialization structure is not consistent with pcdSupport"));
-+
-+    /* get PCD registers pointers */
-+    switch (p_FmPort->portType)
-+    {
-+        case (e_FM_PORT_TYPE_RX_10G):
-+        case (e_FM_PORT_TYPE_RX):
-+            p_BmiNia = &p_FmPort->port.bmi_regs->rx.fmbm_rfne;
-+            p_BmiPrsNia = &p_FmPort->port.bmi_regs->rx.fmbm_rfpne;
-+            p_BmiPrsStartOffset = &p_FmPort->port.bmi_regs->rx.fmbm_rpso;
-+            p_BmiInitPrsResult = &p_FmPort->port.bmi_regs->rx.fmbm_rprai[0];
-+            p_BmiCcBase = &p_FmPort->port.bmi_regs->rx.fmbm_rccb;
-+            break;
-+        case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+            p_BmiNia = &p_FmPort->port.bmi_regs->oh.fmbm_ofne;
-+            p_BmiPrsNia = &p_FmPort->port.bmi_regs->oh.fmbm_ofpne;
-+            p_BmiPrsStartOffset = &p_FmPort->port.bmi_regs->oh.fmbm_opso;
-+            p_BmiInitPrsResult = &p_FmPort->port.bmi_regs->oh.fmbm_oprai[0];
-+            p_BmiCcBase = &p_FmPort->port.bmi_regs->oh.fmbm_occb;
-+            break;
-+        default:
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Invalid port type"));
-+    }
-+
-+    /* set PCD port parameter */
-+    if (p_FmPort->pcdEngines & FM_PCD_CC)
-+    {
-+        err = FmPcdCcBindTree(p_FmPort->h_FmPcd, p_PcdParams,
-+                              p_PcdParams->p_CcParams->h_CcTree,
-+                              &ccTreePhysOffset, p_FmPort);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+        WRITE_UINT32(*p_BmiCcBase, ccTreePhysOffset);
-+        p_FmPort->ccTreeId = p_PcdParams->p_CcParams->h_CcTree;
-+    }
-+
-+    if (p_FmPort->pcdEngines & FM_PCD_KG)
-+    {
-+        if (p_PcdParams->p_KgParams->numOfSchemes == 0)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("For ports using Keygen, at least one scheme must be bound. "));
-+
-+        err = FmPcdKgSetOrBindToClsPlanGrp(p_FmPort->h_FmPcd,
-+                                           p_FmPort->hardwarePortId,
-+                                           p_FmPort->netEnvId,
-+                                           p_FmPort->optArray,
-+                                           &p_FmPort->clsPlanGrpId,
-+                                           &isEmptyClsPlanGrp);
-+        if (err)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                         ("FmPcdKgSetOrBindToClsPlanGrp failed. "));
-+
-+        p_FmPort->useClsPlan = !isEmptyClsPlanGrp;
-+
-+        schemeBind.netEnvId = p_FmPort->netEnvId;
-+        schemeBind.hardwarePortId = p_FmPort->hardwarePortId;
-+        schemeBind.numOfSchemes = p_PcdParams->p_KgParams->numOfSchemes;
-+        schemeBind.useClsPlan = p_FmPort->useClsPlan;
-+
-+        /* for each scheme */
-+        for (i = 0; i < p_PcdParams->p_KgParams->numOfSchemes; i++)
-+        {
-+            ASSERT_COND(p_PcdParams->p_KgParams->h_Schemes[i]);
-+            physicalSchemeId = FmPcdKgGetSchemeId(
-+                    p_PcdParams->p_KgParams->h_Schemes[i]);
-+            schemeBind.schemesIds[i] = physicalSchemeId;
-+            /* build vector */
-+            p_FmPort->schemesPerPortVector |= 1
-+                    << (31 - (uint32_t)physicalSchemeId);
-+#if (DPAA_VERSION >= 11)
-+            /*because of the state that VSPE is defined per port - all PCD path should be according to this requirement
-+             if !VSPE - in port, for relevant scheme VSPE can not be set*/
-+            if (!p_FmPort->vspe
-+                    && FmPcdKgGetVspe((p_PcdParams->p_KgParams->h_Schemes[i])))
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                             ("VSPE is not at port level"));
-+#endif /* (DPAA_VERSION >= 11) */
-+        }
-+
-+        err = FmPcdKgBindPortToSchemes(p_FmPort->h_FmPcd, &schemeBind);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    /***************************/
-+    /* configure NIA after BMI */
-+    /***************************/
-+    /* rfne may contain FDCS bits, so first we read them. */
-+    p_FmPort->savedBmiNia = GET_UINT32(*p_BmiNia) & BMI_RFNE_FDCS_MASK;
-+
-+    /* If policer is used directly after BMI or PRS */
-+    if ((p_FmPort->pcdEngines & FM_PCD_PLCR)
-+            && ((p_PcdParams->pcdSupport == e_FM_PORT_PCD_SUPPORT_PLCR_ONLY)
-+                    || (p_PcdParams->pcdSupport
-+                            == e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR)))
-+    {
-+        if (!p_PcdParams->p_PlcrParams->h_Profile)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                         ("Profile should be initialized"));
-+
-+        absoluteProfileId = (uint16_t)FmPcdPlcrProfileGetAbsoluteId(
-+                p_PcdParams->p_PlcrParams->h_Profile);
-+
-+        if (!FmPcdPlcrIsProfileValid(p_FmPort->h_FmPcd, absoluteProfileId))
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                         ("Private port profile not valid."));
-+
-+        tmpReg = (uint32_t)(absoluteProfileId | NIA_PLCR_ABSOLUTE);
-+
-+        if (p_FmPort->pcdEngines & FM_PCD_PRS) /* e_FM_PCD_SUPPORT_PRS_AND_PLCR */
-+            /* update BMI HPNIA */
-+            WRITE_UINT32(*p_BmiPrsNia, (uint32_t)(NIA_ENG_PLCR | tmpReg));
-+        else
-+            /* e_FM_PCD_SUPPORT_PLCR_ONLY */
-+            /* update BMI NIA */
-+            p_FmPort->savedBmiNia |= (uint32_t)(NIA_ENG_PLCR);
-+    }
-+
-+    /* if CC is used directly after BMI */
-+    if ((p_PcdParams->pcdSupport == e_FM_PORT_PCD_SUPPORT_CC_ONLY)
-+#ifdef FM_CAPWAP_SUPPORT
-+    || (p_PcdParams->pcdSupport == e_FM_PORT_PCD_SUPPORT_CC_AND_KG)
-+    || (p_PcdParams->pcdSupport == e_FM_PORT_PCD_SUPPORT_CC_AND_KG_AND_PLCR)
-+#endif /* FM_CAPWAP_SUPPORT */
-+    )
-+    {
-+        if (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_OPERATION,
-+                    ("e_FM_PORT_PCD_SUPPORT_CC_xx available for offline parsing ports only"));
-+        p_FmPort->savedBmiNia |= (uint32_t)(NIA_ENG_FM_CTL | NIA_FM_CTL_AC_CC);
-+        /* check that prs start offset == RIM[FOF] */
-+    }
-+
-+    if (p_FmPort->pcdEngines & FM_PCD_PRS)
-+    {
-+        ASSERT_COND(p_PcdParams->p_PrsParams);
-+#if (DPAA_VERSION >= 11)
-+        if (p_PcdParams->p_PrsParams->firstPrsHdr == HEADER_TYPE_CAPWAP)
-+            hdrNum = OFFLOAD_SW_PATCH_CAPWAP_LABEL;
-+        else
-+        {
-+#endif /* (DPAA_VERSION >= 11) */
-+            /* if PRS is used it is always first */
-+                hdrNum = GetPrsHdrNum(p_PcdParams->p_PrsParams->firstPrsHdr);
-+            if (hdrNum == ILLEGAL_HDR_NUM)
-+                RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("Unsupported header."));
-+#if (DPAA_VERSION >= 11)
-+        }
-+#endif /* (DPAA_VERSION >= 11) */
-+        p_FmPort->savedBmiNia |= (uint32_t)(NIA_ENG_PRS | (uint32_t)(hdrNum));
-+        /* set after parser NIA */
-+        tmpReg = 0;
-+        switch (p_PcdParams->pcdSupport)
-+        {
-+            case (e_FM_PORT_PCD_SUPPORT_PRS_ONLY):
-+                WRITE_UINT32(*p_BmiPrsNia,
-+                             GET_NIA_BMI_AC_ENQ_FRAME(p_FmPort->h_FmPcd));
-+                break;
-+            case (e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC):
-+            case (e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR):
-+                tmpReg = NIA_KG_CC_EN;
-+            case (e_FM_PORT_PCD_SUPPORT_PRS_AND_KG):
-+            case (e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR):
-+                if (p_PcdParams->p_KgParams->directScheme)
-+                {
-+                    physicalSchemeId = FmPcdKgGetSchemeId(
-+                            p_PcdParams->p_KgParams->h_DirectScheme);
-+                    /* check that this scheme was bound to this port */
-+                    for (i = 0; i < p_PcdParams->p_KgParams->numOfSchemes; i++)
-+                        if (p_PcdParams->p_KgParams->h_DirectScheme
-+                                == p_PcdParams->p_KgParams->h_Schemes[i])
-+                            break;
-+                    if (i == p_PcdParams->p_KgParams->numOfSchemes)
-+                        RETURN_ERROR(
-+                                MAJOR,
-+                                E_INVALID_VALUE,
-+                                ("Direct scheme is not one of the port selected schemes."));
-+                    tmpReg |= (uint32_t)(NIA_KG_DIRECT | physicalSchemeId);
-+                }
-+                WRITE_UINT32(*p_BmiPrsNia, NIA_ENG_KG | tmpReg);
-+                break;
-+            case (e_FM_PORT_PCD_SUPPORT_PRS_AND_CC):
-+            case (e_FM_PORT_PCD_SUPPORT_PRS_AND_CC_AND_PLCR):
-+                WRITE_UINT32(*p_BmiPrsNia,
-+                             (uint32_t)(NIA_ENG_FM_CTL | NIA_FM_CTL_AC_CC));
-+                break;
-+            case (e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR):
-+                break;
-+            default:
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Invalid PCD support"));
-+        }
-+
-+        /* set start parsing offset */
-+        WRITE_UINT32(*p_BmiPrsStartOffset,
-+                     p_PcdParams->p_PrsParams->parsingOffset);
-+
-+        /************************************/
-+        /* Parser port parameters           */
-+        /************************************/
-+        /* stop before configuring */
-+        WRITE_UINT32(p_FmPort->p_FmPortPrsRegs->pcac, PRS_CAC_STOP);
-+        /* wait for parser to be in idle state */
-+        while (GET_UINT32(p_FmPort->p_FmPortPrsRegs->pcac) & PRS_CAC_ACTIVE)
-+            ;
-+
-+        /* set soft seq attachment register */
-+        memset(tmpHxs, 0, FM_PCD_PRS_NUM_OF_HDRS * sizeof(uint32_t));
-+
-+        /* set protocol options */
-+        for (i = 0; p_FmPort->optArray[i]; i++)
-+            switch (p_FmPort->optArray[i])
-+            {
-+                case (ETH_BROADCAST):
-+                    hdrNum = GetPrsHdrNum(HEADER_TYPE_ETH);
-+                    tmpHxs[hdrNum] |= (i + 1) << PRS_HDR_ETH_BC_SHIFT;
-+                    break;
-+                case (ETH_MULTICAST):
-+                    hdrNum = GetPrsHdrNum(HEADER_TYPE_ETH);
-+                    tmpHxs[hdrNum] |= (i + 1) << PRS_HDR_ETH_MC_SHIFT;
-+                    break;
-+                case (VLAN_STACKED):
-+                    hdrNum = GetPrsHdrNum(HEADER_TYPE_VLAN);
-+                    tmpHxs[hdrNum] |= (i + 1) << PRS_HDR_VLAN_STACKED_SHIFT;
-+                    break;
-+                case (MPLS_STACKED):
-+                    hdrNum = GetPrsHdrNum(HEADER_TYPE_MPLS);
-+                    tmpHxs[hdrNum] |= (i + 1) << PRS_HDR_MPLS_STACKED_SHIFT;
-+                    break;
-+                case (IPV4_BROADCAST_1):
-+                    hdrNum = GetPrsHdrNum(HEADER_TYPE_IPv4);
-+                    tmpHxs[hdrNum] |= (i + 1) << PRS_HDR_IPV4_1_BC_SHIFT;
-+                    break;
-+                case (IPV4_MULTICAST_1):
-+                    hdrNum = GetPrsHdrNum(HEADER_TYPE_IPv4);
-+                    tmpHxs[hdrNum] |= (i + 1) << PRS_HDR_IPV4_1_MC_SHIFT;
-+                    break;
-+                case (IPV4_UNICAST_2):
-+					hdrNum = GetPrsHdrNum(HEADER_TYPE_IPv4);
-+                    tmpHxs[hdrNum] |= (i + 1) << PRS_HDR_IPV4_2_UC_SHIFT;
-+                    break;
-+                case (IPV4_MULTICAST_BROADCAST_2):
-+					hdrNum = GetPrsHdrNum(HEADER_TYPE_IPv4);
-+                    tmpHxs[hdrNum] |= (i + 1) << PRS_HDR_IPV4_2_MC_BC_SHIFT;
-+                    break;
-+                case (IPV6_MULTICAST_1):
-+                    hdrNum = GetPrsHdrNum(HEADER_TYPE_IPv6);
-+                    tmpHxs[hdrNum] |= (i + 1) << PRS_HDR_IPV6_1_MC_SHIFT;
-+                    break;
-+                case (IPV6_UNICAST_2):
-+                    hdrNum = GetPrsHdrNum(HEADER_TYPE_IPv6);
-+                    tmpHxs[hdrNum] |= (i + 1) << PRS_HDR_IPV6_2_UC_SHIFT;
-+                    break;
-+                case (IPV6_MULTICAST_2):
-+                    hdrNum = GetPrsHdrNum(HEADER_TYPE_IPv6);
-+                    tmpHxs[hdrNum] |= (i + 1) << PRS_HDR_IPV6_2_MC_SHIFT;
-+                    break;
-+            }
-+
-+        if (FmPcdNetEnvIsHdrExist(p_FmPort->h_FmPcd, p_FmPort->netEnvId,
-+                                  HEADER_TYPE_UDP_ENCAP_ESP))
-+        {
-+            if (p_PcdParams->p_PrsParams->numOfHdrsWithAdditionalParams == FM_PCD_PRS_NUM_OF_HDRS)
-+                RETURN_ERROR(
-+                         MINOR, E_INVALID_VALUE,
-+                         ("If HEADER_TYPE_UDP_ENCAP_ESP is used, numOfHdrsWithAdditionalParams may be up to FM_PCD_PRS_NUM_OF_HDRS - 1"));
-+
-+            p_PcdParams->p_PrsParams->additionalParams[p_PcdParams->p_PrsParams->numOfHdrsWithAdditionalParams].hdr =
-+                    HEADER_TYPE_UDP;
-+            p_PcdParams->p_PrsParams->additionalParams[p_PcdParams->p_PrsParams->numOfHdrsWithAdditionalParams].swPrsEnable =
-+                    TRUE;
-+            p_PcdParams->p_PrsParams->numOfHdrsWithAdditionalParams++;
-+        }
-+
-+        /* set MPLS default next header - HW reset workaround  */
-+        hdrNum = GetPrsHdrNum(HEADER_TYPE_MPLS);
-+        tmpHxs[hdrNum] |= PRS_HDR_MPLS_LBL_INTER_EN;
-+        L3HdrNum = GetPrsHdrNum(HEADER_TYPE_USER_DEFINED_L3);
-+        tmpHxs[hdrNum] |= (uint32_t)L3HdrNum << PRS_HDR_MPLS_NEXT_HDR_SHIFT;
-+
-+        /* for GRE, disable errors */
-+        greHdrNum = GetPrsHdrNum(HEADER_TYPE_GRE);
-+        tmpHxs[greHdrNum] |= PRS_HDR_ERROR_DIS;
-+
-+        /* For UDP remove PAD from L4 checksum calculation */
-+        hdrNum = GetPrsHdrNum(HEADER_TYPE_UDP);
-+        tmpHxs[hdrNum] |= PRS_HDR_UDP_PAD_REMOVAL;
-+        /* For TCP remove PAD from L4 checksum calculation */
-+        hdrNum = GetPrsHdrNum(HEADER_TYPE_TCP);
-+        tmpHxs[hdrNum] |= PRS_HDR_TCP_PAD_REMOVAL;
-+
-+        /* config additional params for specific headers */
-+        for (i = 0; i < p_PcdParams->p_PrsParams->numOfHdrsWithAdditionalParams;
-+                i++)
-+        {
-+            /* case for using sw parser as the initial NIA address, before
-+               * HW parsing
-+               */
-+            if ((p_PcdParams->p_PrsParams->additionalParams[i].hdr == HEADER_TYPE_NONE) && 
-+                    p_PcdParams->p_PrsParams->additionalParams[i].swPrsEnable)
-+            {
-+                initialSwPrs = FmPcdGetSwPrsOffset(p_FmPort->h_FmPcd, HEADER_TYPE_NONE,
-+                               p_PcdParams->p_PrsParams->additionalParams[i].indexPerHdr);
-+                if (initialSwPrs == ILLEGAL_BASE)
-+                    RETURN_ERROR(MAJOR, E_INVALID_VALUE, NO_MSG);
-+
-+                /* clear parser first HXS */
-+                p_FmPort->savedBmiNia &= ~BMI_RFNE_HXS_MASK; /* 0x000000FF */
-+                /* rewrite with soft parser start */
-+                p_FmPort->savedBmiNia |= initialSwPrs;
-+                continue;
-+            }
-+
-+            hdrNum =
-+                GetPrsHdrNum(p_PcdParams->p_PrsParams->additionalParams[i].hdr);
-+            if (hdrNum == ILLEGAL_HDR_NUM)
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE, NO_MSG);
-+            if (hdrNum == NO_HDR_NUM)
-+                RETURN_ERROR(
-+                        MAJOR, E_INVALID_VALUE,
-+                        ("Private headers may not use additional parameters"));
-+
-+            err = AdditionalPrsParams(
-+                    p_FmPort, &p_PcdParams->p_PrsParams->additionalParams[i],
-+                    &tmpHxs[hdrNum]);
-+            if (err)
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE, NO_MSG);
-+        }
-+
-+        /* Check if ip-reassembly port - need to link sw-parser code */
-+        if (p_FmPort->h_IpReassemblyManip)
-+        {
-+           /* link to sw parser code for IP Frag - only if no other code is applied. */
-+            hdrNum = GetPrsHdrNum(HEADER_TYPE_IPv4);
-+            if (!(tmpHxs[hdrNum] & PRS_HDR_SW_PRS_EN))
-+                tmpHxs[hdrNum] |= (PRS_HDR_SW_PRS_EN | OFFLOAD_SW_PATCH_IPv4_IPR_LABEL);
-+            hdrNum = GetPrsHdrNum(HEADER_TYPE_IPv6);
-+            if (!(tmpHxs[hdrNum] & PRS_HDR_SW_PRS_EN))
-+                tmpHxs[hdrNum] |= (PRS_HDR_SW_PRS_EN | OFFLOAD_SW_PATCH_IPv6_IPR_LABEL);
-+        } else {
-+            if (FmPcdNetEnvIsHdrExist(p_FmPort->h_FmPcd, p_FmPort->netEnvId, HEADER_TYPE_UDP_LITE))
-+            {
-+                hdrNum = GetPrsHdrNum(HEADER_TYPE_IPv6);
-+                if (!(tmpHxs[hdrNum] & PRS_HDR_SW_PRS_EN))
-+                    tmpHxs[hdrNum] |= (PRS_HDR_SW_PRS_EN | OFFLOAD_SW_PATCH_IPv6_IPF_LABEL);
-+            } else if ((FmPcdIsAdvancedOffloadSupported(p_FmPort->h_FmPcd)
-+                       && (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)))
-+                {
-+                    hdrNum = GetPrsHdrNum(HEADER_TYPE_IPv6);
-+                    if (!(tmpHxs[hdrNum] & PRS_HDR_SW_PRS_EN))
-+                        tmpHxs[hdrNum] |= (PRS_HDR_SW_PRS_EN | OFFLOAD_SW_PATCH_IPv6_IPF_LABEL);
-+                }
-+            }
-+
-+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+        if (FmPcdNetEnvIsHdrExist(p_FmPort->h_FmPcd, p_FmPort->netEnvId,
-+                        HEADER_TYPE_UDP_LITE))
-+        {
-+            /* link to sw parser code for udp lite - only if no other code is applied. */
-+            hdrNum = GetPrsHdrNum(HEADER_TYPE_IPv6);
-+            if (!(tmpHxs[hdrNum] & PRS_HDR_SW_PRS_EN))
-+            tmpHxs[hdrNum] |= (PRS_HDR_SW_PRS_EN | UDP_LITE_SW_PATCH_LABEL);
-+        }
-+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
-+        for (i = 0; i < FM_PCD_PRS_NUM_OF_HDRS; i++)
-+        {
-+            /* For all header set LCV as taken from netEnv*/
-+            WRITE_UINT32(
-+                    p_FmPort->p_FmPortPrsRegs->hdrs[i].lcv,
-+                    FmPcdGetLcv(p_FmPort->h_FmPcd, p_FmPort->netEnvId, (uint8_t)i));
-+            /* set HXS register according to default+Additional params+protocol options */
-+            WRITE_UINT32(p_FmPort->p_FmPortPrsRegs->hdrs[i].softSeqAttach,
-+                         tmpHxs[i]);
-+        }
-+
-+        /* set tpid. */
-+        tmpReg = PRS_TPID_DFLT;
-+        if (p_PcdParams->p_PrsParams->setVlanTpid1)
-+        {
-+            tmpReg &= PRS_TPID2_MASK;
-+            tmpReg |= (uint32_t)p_PcdParams->p_PrsParams->vlanTpid1
-+                    << PRS_PCTPID_SHIFT;
-+        }
-+        if (p_PcdParams->p_PrsParams->setVlanTpid2)
-+        {
-+            tmpReg &= PRS_TPID1_MASK;
-+            tmpReg |= (uint32_t)p_PcdParams->p_PrsParams->vlanTpid2;
-+        }WRITE_UINT32(p_FmPort->p_FmPortPrsRegs->pctpid, tmpReg);
-+
-+        /* enable parser */
-+        WRITE_UINT32(p_FmPort->p_FmPortPrsRegs->pcac, 0);
-+
-+        if (p_PcdParams->p_PrsParams->prsResultPrivateInfo)
-+            p_FmPort->privateInfo =
-+                    p_PcdParams->p_PrsParams->prsResultPrivateInfo;
-+
-+    } /* end parser */
-+    else {
-+        if (FmPcdIsAdvancedOffloadSupported(p_FmPort->h_FmPcd)
-+            && (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING))
-+        {
-+            hdrNum = GetPrsHdrNum(HEADER_TYPE_IPv6);
-+            WRITE_UINT32(p_FmPort->p_FmPortPrsRegs->hdrs[hdrNum].softSeqAttach,
-+                         (PRS_HDR_SW_PRS_EN | OFFLOAD_SW_PATCH_IPv6_IPF_LABEL));
-+        }
-+
-+        WRITE_UINT32(*p_BmiPrsStartOffset, 0);
-+
-+        p_FmPort->privateInfo = 0;
-+    }
-+
-+    FmPortCheckNApplyMacsec(p_FmPort);
-+
-+    WRITE_UINT32(
-+            *p_BmiPrsStartOffset,
-+            GET_UINT32(*p_BmiPrsStartOffset) + p_FmPort->internalBufferOffset);
-+
-+    /* set initial parser result - used for all engines */
-+    for (i = 0; i < FM_PORT_PRS_RESULT_NUM_OF_WORDS; i++)
-+    {
-+        if (!i)
-+            WRITE_UINT32(
-+                    *(p_BmiInitPrsResult),
-+                    (uint32_t)(((uint32_t)p_FmPort->privateInfo << BMI_PR_PORTID_SHIFT) | BMI_PRS_RESULT_HIGH));
-+        else
-+        {
-+            if (i < FM_PORT_PRS_RESULT_NUM_OF_WORDS / 2)
-+                WRITE_UINT32(*(p_BmiInitPrsResult+i), BMI_PRS_RESULT_HIGH);
-+            else
-+                WRITE_UINT32(*(p_BmiInitPrsResult+i), BMI_PRS_RESULT_LOW);
-+        }
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error DeletePcd(t_FmPort *p_FmPort)
-+{
-+    t_Error err = E_OK;
-+    volatile uint32_t *p_BmiNia = NULL;
-+    volatile uint32_t *p_BmiPrsStartOffset = NULL;
-+
-+    ASSERT_COND(p_FmPort);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    if (p_FmPort->imEn)
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for non-independant mode ports only"));
-+
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING))
-+        RETURN_ERROR( MAJOR, E_INVALID_OPERATION,
-+                     ("available for Rx and offline parsing ports only"));
-+
-+    if (!p_FmPort->pcdEngines)
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION, ("called for non PCD port"));
-+
-+    /* get PCD registers pointers */
-+    switch (p_FmPort->portType)
-+    {
-+        case (e_FM_PORT_TYPE_RX_10G):
-+        case (e_FM_PORT_TYPE_RX):
-+            p_BmiNia = &p_FmPort->port.bmi_regs->rx.fmbm_rfne;
-+            p_BmiPrsStartOffset = &p_FmPort->port.bmi_regs->rx.fmbm_rpso;
-+            break;
-+        case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+            p_BmiNia = &p_FmPort->port.bmi_regs->oh.fmbm_ofne;
-+            p_BmiPrsStartOffset = &p_FmPort->port.bmi_regs->oh.fmbm_opso;
-+            break;
-+        default:
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Invalid port type"));
-+    }
-+
-+    if ((GET_UINT32(*p_BmiNia) & GET_NO_PCD_NIA_BMI_AC_ENQ_FRAME())
-+            != GET_NO_PCD_NIA_BMI_AC_ENQ_FRAME())
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("port has to be detached previousely"));
-+
-+    WRITE_UINT32(*p_BmiPrsStartOffset, 0);
-+
-+    /* "cut" PCD out of the port's flow - go to BMI */
-+    /* WRITE_UINT32(*p_BmiNia, (p_FmPort->savedBmiNia & BMI_RFNE_FDCS_MASK) | (NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME)); */
-+
-+    if (p_FmPort->pcdEngines & FM_PCD_PRS)
-+    {
-+        /* stop parser */
-+        WRITE_UINT32(p_FmPort->p_FmPortPrsRegs->pcac, PRS_CAC_STOP);
-+        /* wait for parser to be in idle state */
-+        while (GET_UINT32(p_FmPort->p_FmPortPrsRegs->pcac) & PRS_CAC_ACTIVE)
-+            ;
-+    }
-+
-+    if (p_FmPort->pcdEngines & FM_PCD_KG)
-+    {
-+        t_FmPcdKgInterModuleBindPortToSchemes schemeBind;
-+
-+        /* unbind all schemes */
-+        p_FmPort->schemesPerPortVector = GetPortSchemeBindParams(p_FmPort,
-+                                                                 &schemeBind);
-+
-+        err = FmPcdKgUnbindPortToSchemes(p_FmPort->h_FmPcd, &schemeBind);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+        err = FmPcdKgDeleteOrUnbindPortToClsPlanGrp(p_FmPort->h_FmPcd,
-+                                                    p_FmPort->hardwarePortId,
-+                                                    p_FmPort->clsPlanGrpId);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        p_FmPort->useClsPlan = FALSE;
-+    }
-+
-+    if (p_FmPort->pcdEngines & FM_PCD_CC)
-+    {
-+        /* unbind - we need to get the treeId too */
-+        err = FmPcdCcUnbindTree(p_FmPort->h_FmPcd, p_FmPort->ccTreeId);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    p_FmPort->pcdEngines = 0;
-+
-+    return E_OK;
-+}
-+
-+static t_Error AttachPCD(t_FmPort *p_FmPort)
-+{
-+    volatile uint32_t *p_BmiNia = NULL;
-+
-+    ASSERT_COND(p_FmPort);
-+
-+    /* get PCD registers pointers */
-+    if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+        p_BmiNia = &p_FmPort->port.bmi_regs->oh.fmbm_ofne;
-+    else
-+        p_BmiNia = &p_FmPort->port.bmi_regs->rx.fmbm_rfne;
-+
-+    /* check that current NIA is BMI to BMI */
-+    if ((GET_UINT32(*p_BmiNia) & ~BMI_RFNE_FDCS_MASK)
-+            != GET_NO_PCD_NIA_BMI_AC_ENQ_FRAME())
-+        RETURN_ERROR( MAJOR, E_INVALID_OPERATION,
-+                     ("may be called only for ports in BMI-to-BMI state."));
-+
-+    if (p_FmPort->requiredAction & UPDATE_FMFP_PRC_WITH_ONE_RISC_ONLY)
-+        if (FmSetNumOfRiscsPerPort(p_FmPort->h_Fm, p_FmPort->hardwarePortId, 1,
-+                                   p_FmPort->orFmanCtrl) != E_OK)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+
-+    if (p_FmPort->requiredAction & UPDATE_NIA_CMNE)
-+    {
-+        if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+            WRITE_UINT32(p_FmPort->port.bmi_regs->oh.fmbm_ocmne,
-+                         p_FmPort->savedBmiCmne);
-+        else
-+            WRITE_UINT32(p_FmPort->port.bmi_regs->rx.fmbm_rcmne,
-+                         p_FmPort->savedBmiCmne);
-+    }
-+
-+    if (p_FmPort->requiredAction & UPDATE_NIA_PNEN)
-+        WRITE_UINT32(p_FmPort->p_FmPortQmiRegs->fmqm_pnen,
-+                     p_FmPort->savedQmiPnen);
-+
-+    if (p_FmPort->requiredAction & UPDATE_NIA_FENE)
-+    {
-+        if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+            WRITE_UINT32(p_FmPort->port.bmi_regs->oh.fmbm_ofene,
-+                         p_FmPort->savedBmiFene);
-+        else
-+            WRITE_UINT32(p_FmPort->port.bmi_regs->rx.fmbm_rfene,
-+                         p_FmPort->savedBmiFene);
-+    }
-+
-+    if (p_FmPort->requiredAction & UPDATE_NIA_FPNE)
-+    {
-+        if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+            WRITE_UINT32(p_FmPort->port.bmi_regs->oh.fmbm_ofpne,
-+                         p_FmPort->savedBmiFpne);
-+        else
-+            WRITE_UINT32(p_FmPort->port.bmi_regs->rx.fmbm_rfpne,
-+                         p_FmPort->savedBmiFpne);
-+    }
-+
-+    if (p_FmPort->requiredAction & UPDATE_OFP_DPTE)
-+    {
-+        ASSERT_COND(p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING);
-+
-+        WRITE_UINT32(p_FmPort->port.bmi_regs->oh.fmbm_ofp,
-+                     p_FmPort->savedBmiOfp);
-+    }
-+
-+    WRITE_UINT32(*p_BmiNia, p_FmPort->savedBmiNia);
-+
-+    if (p_FmPort->requiredAction & UPDATE_NIA_PNDN)
-+    {
-+        p_FmPort->origNonRxQmiRegsPndn =
-+                GET_UINT32(p_FmPort->port.qmi_regs->fmqm_pndn);
-+        WRITE_UINT32(p_FmPort->port.qmi_regs->fmqm_pndn,
-+                     p_FmPort->savedNonRxQmiRegsPndn);
-+    }
-+
-+    return E_OK;
-+}
-+
-+static t_Error DetachPCD(t_FmPort *p_FmPort)
-+{
-+    volatile uint32_t *p_BmiNia = NULL;
-+
-+    ASSERT_COND(p_FmPort);
-+
-+    /* get PCD registers pointers */
-+    if (p_FmPort->requiredAction & UPDATE_NIA_PNDN)
-+        WRITE_UINT32(p_FmPort->port.qmi_regs->fmqm_pndn,
-+                     p_FmPort->origNonRxQmiRegsPndn);
-+
-+    if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+        p_BmiNia = &p_FmPort->port.bmi_regs->oh.fmbm_ofne;
-+    else
-+        p_BmiNia = &p_FmPort->port.bmi_regs->rx.fmbm_rfne;
-+
-+    WRITE_UINT32(
-+            *p_BmiNia,
-+            (p_FmPort->savedBmiNia & BMI_RFNE_FDCS_MASK) | GET_NO_PCD_NIA_BMI_AC_ENQ_FRAME());
-+
-+    if (FmPcdGetHcHandle(p_FmPort->h_FmPcd))
-+        FmPcdHcSync(p_FmPort->h_FmPcd);
-+
-+    if (p_FmPort->requiredAction & UPDATE_NIA_FENE)
-+    {
-+        if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+            WRITE_UINT32(p_FmPort->port.bmi_regs->oh.fmbm_ofene,
-+                         NIA_ENG_QMI_ENQ | NIA_ORDER_RESTOR);
-+        else
-+            WRITE_UINT32(p_FmPort->port.bmi_regs->rx.fmbm_rfene,
-+                         NIA_ENG_QMI_ENQ | NIA_ORDER_RESTOR);
-+    }
-+
-+    if (p_FmPort->requiredAction & UPDATE_NIA_PNEN)
-+        WRITE_UINT32(p_FmPort->port.qmi_regs->fmqm_pnen,
-+                     NIA_ENG_BMI | NIA_BMI_AC_RELEASE);
-+
-+    if (p_FmPort->requiredAction & UPDATE_FMFP_PRC_WITH_ONE_RISC_ONLY)
-+        if (FmSetNumOfRiscsPerPort(p_FmPort->h_Fm, p_FmPort->hardwarePortId, 2,
-+                                   p_FmPort->orFmanCtrl) != E_OK)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+
-+    p_FmPort->requiredAction = 0;
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+/*              Inter-module API routines                                    */
-+/*****************************************************************************/
-+void FmPortSetMacsecCmd(t_Handle h_FmPort, uint8_t dfltSci)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    volatile uint32_t *p_BmiCfgReg = NULL;
-+    uint32_t tmpReg;
-+
-+    SANITY_CHECK_RETURN(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN(p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_TX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_TX))
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_OPERATION, ("The routine is relevant for Tx ports only"));
-+        return;
-+    }
-+
-+    p_BmiCfgReg = &p_FmPort->port.bmi_regs->tx.fmbm_tfca;
-+    tmpReg = GET_UINT32(*p_BmiCfgReg) & ~BMI_CMD_ATTR_MACCMD_MASK;
-+    tmpReg |= BMI_CMD_ATTR_MACCMD_SECURED;
-+    tmpReg |= (((uint32_t)dfltSci << BMI_CMD_ATTR_MACCMD_SC_SHIFT)
-+            & BMI_CMD_ATTR_MACCMD_SC_MASK);
-+
-+    WRITE_UINT32(*p_BmiCfgReg, tmpReg);
-+}
-+
-+uint8_t FmPortGetNetEnvId(t_Handle h_FmPort)
-+{
-+    return ((t_FmPort*)h_FmPort)->netEnvId;
-+}
-+
-+uint8_t FmPortGetHardwarePortId(t_Handle h_FmPort)
-+{
-+    return ((t_FmPort*)h_FmPort)->hardwarePortId;
-+}
-+
-+uint32_t FmPortGetPcdEngines(t_Handle h_FmPort)
-+{
-+    return ((t_FmPort*)h_FmPort)->pcdEngines;
-+}
-+
-+#if (DPAA_VERSION >= 11)
-+t_Error FmPortSetGprFunc(t_Handle h_FmPort, e_FmPortGprFuncType gprFunc,
-+                         void **p_Value)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    uint32_t muramPageOffset;
-+
-+    ASSERT_COND(p_FmPort);
-+    ASSERT_COND(p_Value);
-+
-+    if (p_FmPort->gprFunc != e_FM_PORT_GPR_EMPTY)
-+    {
-+        if (p_FmPort->gprFunc != gprFunc)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                         ("gpr was assigned with different func"));
-+    }
-+    else
-+    {
-+        switch (gprFunc)
-+        {
-+            case (e_FM_PORT_GPR_MURAM_PAGE):
-+                p_FmPort->p_ParamsPage = FM_MURAM_AllocMem(p_FmPort->h_FmMuram,
-+                                                           256, 8);
-+                if (!p_FmPort->p_ParamsPage)
-+                    RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MURAM alloc for page"));
-+
-+                IOMemSet32(p_FmPort->p_ParamsPage, 0, 256);
-+                muramPageOffset =
-+                        (uint32_t)(XX_VirtToPhys(p_FmPort->p_ParamsPage)
-+                                - p_FmPort->fmMuramPhysBaseAddr);
-+                switch (p_FmPort->portType)
-+                {
-+                    case (e_FM_PORT_TYPE_RX_10G):
-+                    case (e_FM_PORT_TYPE_RX):
-+                        WRITE_UINT32(
-+                                p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rgpr,
-+                                muramPageOffset);
-+                        break;
-+                    case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+                        WRITE_UINT32(
-+                                p_FmPort->p_FmPortBmiRegs->ohPortBmiRegs.fmbm_ogpr,
-+                                muramPageOffset);
-+                        break;
-+                    default:
-+                        RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                                     ("Invalid port type"));
-+                }
-+                break;
-+            default:
-+                RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+        }
-+        p_FmPort->gprFunc = gprFunc;
-+    }
-+
-+    switch (p_FmPort->gprFunc)
-+    {
-+        case (e_FM_PORT_GPR_MURAM_PAGE):
-+            *p_Value = p_FmPort->p_ParamsPage;
-+            break;
-+        default:
-+            RETURN_ERROR(MAJOR, E_INVALID_SELECTION, NO_MSG);
-+    }
-+
-+    return E_OK;
-+}
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+t_Error FmPortGetSetCcParams(t_Handle h_FmPort,
-+                             t_FmPortGetSetCcParams *p_CcParams)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    int tmpInt;
-+    volatile uint32_t *p_BmiPrsStartOffset = NULL;
-+
-+    /* this function called from Cc for pass and receive parameters port params between CC and PORT*/
-+
-+    if ((p_CcParams->getCcParams.type & OFFSET_OF_PR)
-+            && (p_FmPort->bufferOffsets.prsResultOffset != ILLEGAL_BASE))
-+    {
-+        p_CcParams->getCcParams.prOffset =
-+                (uint8_t)p_FmPort->bufferOffsets.prsResultOffset;
-+        p_CcParams->getCcParams.type &= ~OFFSET_OF_PR;
-+    }
-+    if (p_CcParams->getCcParams.type & HW_PORT_ID)
-+    {
-+        p_CcParams->getCcParams.hardwarePortId =
-+                (uint8_t)p_FmPort->hardwarePortId;
-+        p_CcParams->getCcParams.type &= ~HW_PORT_ID;
-+    }
-+    if ((p_CcParams->getCcParams.type & OFFSET_OF_DATA)
-+            && (p_FmPort->bufferOffsets.dataOffset != ILLEGAL_BASE))
-+    {
-+        p_CcParams->getCcParams.dataOffset =
-+                (uint16_t)p_FmPort->bufferOffsets.dataOffset;
-+        p_CcParams->getCcParams.type &= ~OFFSET_OF_DATA;
-+    }
-+    if (p_CcParams->getCcParams.type & NUM_OF_TASKS)
-+    {
-+        p_CcParams->getCcParams.numOfTasks = (uint8_t)p_FmPort->tasks.num;
-+        p_CcParams->getCcParams.type &= ~NUM_OF_TASKS;
-+    }
-+    if (p_CcParams->getCcParams.type & NUM_OF_EXTRA_TASKS)
-+    {
-+        p_CcParams->getCcParams.numOfExtraTasks =
-+                (uint8_t)p_FmPort->tasks.extra;
-+        p_CcParams->getCcParams.type &= ~NUM_OF_EXTRA_TASKS;
-+    }
-+    if (p_CcParams->getCcParams.type & FM_REV)
-+    {
-+        p_CcParams->getCcParams.revInfo.majorRev = p_FmPort->fmRevInfo.majorRev;
-+        p_CcParams->getCcParams.revInfo.minorRev = p_FmPort->fmRevInfo.minorRev;
-+        p_CcParams->getCcParams.type &= ~FM_REV;
-+    }
-+    if (p_CcParams->getCcParams.type & DISCARD_MASK)
-+    {
-+        if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+            p_CcParams->getCcParams.discardMask =
-+                    GET_UINT32(p_FmPort->p_FmPortBmiRegs->ohPortBmiRegs.fmbm_ofsdm);
-+        else
-+            p_CcParams->getCcParams.discardMask =
-+                    GET_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfsdm);
-+        p_CcParams->getCcParams.type &= ~DISCARD_MASK;
-+    }
-+    if (p_CcParams->getCcParams.type & MANIP_EXTRA_SPACE)
-+    {
-+        p_CcParams->getCcParams.internalBufferOffset =
-+                p_FmPort->internalBufferOffset;
-+        p_CcParams->getCcParams.type &= ~MANIP_EXTRA_SPACE;
-+    }
-+    if (p_CcParams->getCcParams.type & GET_NIA_FPNE)
-+    {
-+        if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+            p_CcParams->getCcParams.nia =
-+                    GET_UINT32(p_FmPort->port.bmi_regs->oh.fmbm_ofpne);
-+        else
-+            p_CcParams->getCcParams.nia =
-+                    GET_UINT32(p_FmPort->port.bmi_regs->rx.fmbm_rfpne);
-+        p_CcParams->getCcParams.type &= ~GET_NIA_FPNE;
-+    }
-+    if (p_CcParams->getCcParams.type & GET_NIA_PNDN)
-+    {
-+        if (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Invalid port type"));
-+        p_CcParams->getCcParams.nia =
-+                GET_UINT32(p_FmPort->p_FmPortQmiRegs->nonRxQmiRegs.fmqm_pndn);
-+        p_CcParams->getCcParams.type &= ~GET_NIA_PNDN;
-+    }
-+
-+    if ((p_CcParams->setCcParams.type & UPDATE_FMFP_PRC_WITH_ONE_RISC_ONLY)
-+            && !(p_FmPort->requiredAction & UPDATE_FMFP_PRC_WITH_ONE_RISC_ONLY))
-+    {
-+        p_FmPort->requiredAction |= UPDATE_FMFP_PRC_WITH_ONE_RISC_ONLY;
-+        p_FmPort->orFmanCtrl = p_CcParams->setCcParams.orFmanCtrl;
-+    }
-+
-+    if ((p_CcParams->setCcParams.type & UPDATE_NIA_PNEN)
-+            && !(p_FmPort->requiredAction & UPDATE_NIA_PNEN))
-+    {
-+        p_FmPort->savedQmiPnen = p_CcParams->setCcParams.nia;
-+        p_FmPort->requiredAction |= UPDATE_NIA_PNEN;
-+    }
-+    else
-+        if (p_CcParams->setCcParams.type & UPDATE_NIA_PNEN)
-+        {
-+            if (p_FmPort->savedQmiPnen != p_CcParams->setCcParams.nia)
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                             ("PNEN was defined previously different"));
-+        }
-+
-+    if ((p_CcParams->setCcParams.type & UPDATE_NIA_PNDN)
-+            && !(p_FmPort->requiredAction & UPDATE_NIA_PNDN))
-+    {
-+        p_FmPort->savedNonRxQmiRegsPndn = p_CcParams->setCcParams.nia;
-+        p_FmPort->requiredAction |= UPDATE_NIA_PNDN;
-+    }
-+    else
-+        if (p_CcParams->setCcParams.type & UPDATE_NIA_PNDN)
-+        {
-+            if (p_FmPort->savedNonRxQmiRegsPndn != p_CcParams->setCcParams.nia)
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                             ("PNDN was defined previously different"));
-+        }
-+
-+    if ((p_CcParams->setCcParams.type & UPDATE_NIA_FENE)
-+            && (p_CcParams->setCcParams.overwrite
-+                    || !(p_FmPort->requiredAction & UPDATE_NIA_FENE)))
-+    {
-+        p_FmPort->savedBmiFene = p_CcParams->setCcParams.nia;
-+        p_FmPort->requiredAction |= UPDATE_NIA_FENE;
-+    }
-+    else
-+        if (p_CcParams->setCcParams.type & UPDATE_NIA_FENE)
-+        {
-+            if (p_FmPort->savedBmiFene != p_CcParams->setCcParams.nia)
-+                RETURN_ERROR( MAJOR, E_INVALID_STATE,
-+                             ("xFENE was defined previously different"));
-+        }
-+
-+    if ((p_CcParams->setCcParams.type & UPDATE_NIA_FPNE)
-+            && !(p_FmPort->requiredAction & UPDATE_NIA_FPNE))
-+    {
-+        p_FmPort->savedBmiFpne = p_CcParams->setCcParams.nia;
-+        p_FmPort->requiredAction |= UPDATE_NIA_FPNE;
-+    }
-+    else
-+        if (p_CcParams->setCcParams.type & UPDATE_NIA_FPNE)
-+        {
-+            if (p_FmPort->savedBmiFpne != p_CcParams->setCcParams.nia)
-+                RETURN_ERROR( MAJOR, E_INVALID_STATE,
-+                             ("xFPNE was defined previously different"));
-+        }
-+
-+    if ((p_CcParams->setCcParams.type & UPDATE_NIA_CMNE)
-+            && !(p_FmPort->requiredAction & UPDATE_NIA_CMNE))
-+    {
-+        p_FmPort->savedBmiCmne = p_CcParams->setCcParams.nia;
-+        p_FmPort->requiredAction |= UPDATE_NIA_CMNE;
-+    }
-+    else
-+        if (p_CcParams->setCcParams.type & UPDATE_NIA_CMNE)
-+        {
-+            if (p_FmPort->savedBmiCmne != p_CcParams->setCcParams.nia)
-+                RETURN_ERROR( MAJOR, E_INVALID_STATE,
-+                             ("xCMNE was defined previously different"));
-+        }
-+
-+    if ((p_CcParams->setCcParams.type & UPDATE_PSO)
-+            && !(p_FmPort->requiredAction & UPDATE_PSO))
-+    {
-+        /* get PCD registers pointers */
-+        switch (p_FmPort->portType)
-+        {
-+            case (e_FM_PORT_TYPE_RX_10G):
-+            case (e_FM_PORT_TYPE_RX):
-+                p_BmiPrsStartOffset = &p_FmPort->port.bmi_regs->rx.fmbm_rpso;
-+                break;
-+            case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+                p_BmiPrsStartOffset = &p_FmPort->port.bmi_regs->oh.fmbm_opso;
-+                break;
-+            default:
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Invalid port type"));
-+        }
-+
-+        /* set start parsing offset */
-+        tmpInt = (int)GET_UINT32(*p_BmiPrsStartOffset)
-+                + p_CcParams->setCcParams.psoSize;
-+        if (tmpInt > 0)
-+            WRITE_UINT32(*p_BmiPrsStartOffset, (uint32_t)tmpInt);
-+
-+        p_FmPort->requiredAction |= UPDATE_PSO;
-+        p_FmPort->savedPrsStartOffset = p_CcParams->setCcParams.psoSize;
-+    }
-+    else
-+        if (p_CcParams->setCcParams.type & UPDATE_PSO)
-+        {
-+            if (p_FmPort->savedPrsStartOffset
-+                    != p_CcParams->setCcParams.psoSize)
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_INVALID_STATE,
-+                        ("parser start offset was defoned previousley different"));
-+        }
-+
-+    if ((p_CcParams->setCcParams.type & UPDATE_OFP_DPTE)
-+            && !(p_FmPort->requiredAction & UPDATE_OFP_DPTE))
-+    {
-+        if (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Invalid port type"));
-+        p_FmPort->savedBmiOfp = GET_UINT32(p_FmPort->port.bmi_regs->oh.fmbm_ofp);
-+        p_FmPort->savedBmiOfp &= ~BMI_FIFO_PIPELINE_DEPTH_MASK;
-+        p_FmPort->savedBmiOfp |= p_CcParams->setCcParams.ofpDpde
-+                << BMI_FIFO_PIPELINE_DEPTH_SHIFT;
-+        p_FmPort->requiredAction |= UPDATE_OFP_DPTE;
-+    }
-+
-+    return E_OK;
-+}
-+/*********************** End of inter-module routines ************************/
-+
-+/****************************************/
-+/*       API Init unit functions        */
-+/****************************************/
-+
-+t_Handle FM_PORT_Config(t_FmPortParams *p_FmPortParams)
-+{
-+    t_FmPort *p_FmPort;
-+    uintptr_t baseAddr = p_FmPortParams->baseAddr;
-+    uint32_t tmpReg;
-+
-+    /* Allocate FM structure */
-+    p_FmPort = (t_FmPort *)XX_Malloc(sizeof(t_FmPort));
-+    if (!p_FmPort)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM Port driver structure"));
-+        return NULL;
-+    }
-+    memset(p_FmPort, 0, sizeof(t_FmPort));
-+
-+    /* Allocate the FM driver's parameters structure */
-+    p_FmPort->p_FmPortDriverParam = (t_FmPortDriverParam *)XX_Malloc(
-+            sizeof(t_FmPortDriverParam));
-+    if (!p_FmPort->p_FmPortDriverParam)
-+    {
-+        XX_Free(p_FmPort);
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM Port driver parameters"));
-+        return NULL;
-+    }
-+    memset(p_FmPort->p_FmPortDriverParam, 0, sizeof(t_FmPortDriverParam));
-+
-+    /* Initialize FM port parameters which will be kept by the driver */
-+    p_FmPort->portType = p_FmPortParams->portType;
-+    p_FmPort->portId = p_FmPortParams->portId;
-+    p_FmPort->pcdEngines = FM_PCD_NONE;
-+    p_FmPort->f_Exception = p_FmPortParams->f_Exception;
-+    p_FmPort->h_App = p_FmPortParams->h_App;
-+    p_FmPort->h_Fm = p_FmPortParams->h_Fm;
-+
-+    /* get FM revision */
-+    FM_GetRevision(p_FmPort->h_Fm, &p_FmPort->fmRevInfo);
-+
-+    /* calculate global portId number */
-+    p_FmPort->hardwarePortId = SwPortIdToHwPortId(p_FmPort->portType,
-+                                    p_FmPortParams->portId,
-+                                    p_FmPort->fmRevInfo.majorRev,
-+                                    p_FmPort->fmRevInfo.minorRev);
-+
-+    if (p_FmPort->fmRevInfo.majorRev >= 6)
-+    {
-+        if ((p_FmPort->portType == e_FM_PORT_TYPE_OH_HOST_COMMAND)
-+                && (p_FmPortParams->portId != FM_OH_PORT_ID))
-+            DBG(WARNING,
-+                    ("Port ID %d is recommended for HC port. Overwriting HW defaults to be suitable for HC.",
-+                            FM_OH_PORT_ID));
-+
-+        if ((p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+                && (p_FmPortParams->portId == FM_OH_PORT_ID))
-+            DBG(WARNING, ("Use non-zero portId for OP port due to insufficient resources on portId 0."));
-+    }
-+
-+    /* Set up FM port parameters for initialization phase only */
-+
-+    /* First, fill in flibs struct */
-+    fman_port_defconfig(&p_FmPort->p_FmPortDriverParam->dfltCfg,
-+                        (enum fman_port_type)p_FmPort->portType);
-+    /* Overwrite some integration specific parameters */
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.rx_pri_elevation =
-+            DEFAULT_PORT_rxFifoPriElevationLevel;
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.rx_fifo_thr =
-+            DEFAULT_PORT_rxFifoThreshold;
-+
-+#if defined(FM_OP_NO_VSP_NO_RELEASE_ERRATA_FMAN_A006675) || defined(FM_ERROR_VSP_NO_MATCH_SW006)
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.errata_A006675 = TRUE;
-+#else
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.errata_A006675 = FALSE;
-+#endif
-+    if ((p_FmPort->fmRevInfo.majorRev == 6)
-+            && (p_FmPort->fmRevInfo.minorRev == 0))
-+        p_FmPort->p_FmPortDriverParam->dfltCfg.errata_A006320 = TRUE;
-+    else
-+        p_FmPort->p_FmPortDriverParam->dfltCfg.errata_A006320 = FALSE;
-+
-+    /* Excessive Threshold register - exists for pre-FMv3 chips only */
-+    if (p_FmPort->fmRevInfo.majorRev < 6)
-+    {
-+#ifdef FM_NO_RESTRICT_ON_ACCESS_RSRC
-+        p_FmPort->p_FmPortDriverParam->dfltCfg.excessive_threshold_register =
-+                TRUE;
-+#endif
-+        p_FmPort->p_FmPortDriverParam->dfltCfg.fmbm_rebm_has_sgd = FALSE;
-+        p_FmPort->p_FmPortDriverParam->dfltCfg.fmbm_tfne_has_features = FALSE;
-+    }
-+    else
-+    {
-+        p_FmPort->p_FmPortDriverParam->dfltCfg.excessive_threshold_register =
-+                FALSE;
-+        p_FmPort->p_FmPortDriverParam->dfltCfg.fmbm_rebm_has_sgd = TRUE;
-+        p_FmPort->p_FmPortDriverParam->dfltCfg.fmbm_tfne_has_features = TRUE;
-+    }
-+    if (p_FmPort->fmRevInfo.majorRev == 4)
-+        p_FmPort->p_FmPortDriverParam->dfltCfg.qmi_deq_options_support = FALSE;
-+    else
-+        p_FmPort->p_FmPortDriverParam->dfltCfg.qmi_deq_options_support = TRUE;
-+
-+    /* Continue with other parameters */
-+    p_FmPort->p_FmPortDriverParam->baseAddr = baseAddr;
-+    /* set memory map pointers */
-+    p_FmPort->p_FmPortQmiRegs =
-+            (t_FmPortQmiRegs *)UINT_TO_PTR(baseAddr + QMI_PORT_REGS_OFFSET);
-+    p_FmPort->p_FmPortBmiRegs =
-+            (u_FmPortBmiRegs *)UINT_TO_PTR(baseAddr + BMI_PORT_REGS_OFFSET);
-+    p_FmPort->p_FmPortPrsRegs =
-+            (t_FmPortPrsRegs *)UINT_TO_PTR(baseAddr + PRS_PORT_REGS_OFFSET);
-+
-+    p_FmPort->p_FmPortDriverParam->bufferPrefixContent.privDataSize =
-+            DEFAULT_PORT_bufferPrefixContent_privDataSize;
-+    p_FmPort->p_FmPortDriverParam->bufferPrefixContent.passPrsResult =
-+            DEFAULT_PORT_bufferPrefixContent_passPrsResult;
-+    p_FmPort->p_FmPortDriverParam->bufferPrefixContent.passTimeStamp =
-+            DEFAULT_PORT_bufferPrefixContent_passTimeStamp;
-+    p_FmPort->p_FmPortDriverParam->bufferPrefixContent.passAllOtherPCDInfo =
-+            DEFAULT_PORT_bufferPrefixContent_passTimeStamp;
-+    p_FmPort->p_FmPortDriverParam->bufferPrefixContent.dataAlign =
-+            DEFAULT_PORT_bufferPrefixContent_dataAlign;
-+    /*    p_FmPort->p_FmPortDriverParam->dmaSwapData                      = (e_FmDmaSwapOption)DEFAULT_PORT_dmaSwapData;
-+     p_FmPort->p_FmPortDriverParam->dmaIntContextCacheAttr           = (e_FmDmaCacheOption)DEFAULT_PORT_dmaIntContextCacheAttr;
-+     p_FmPort->p_FmPortDriverParam->dmaHeaderCacheAttr               = (e_FmDmaCacheOption)DEFAULT_PORT_dmaHeaderCacheAttr;
-+     p_FmPort->p_FmPortDriverParam->dmaScatterGatherCacheAttr        = (e_FmDmaCacheOption)DEFAULT_PORT_dmaScatterGatherCacheAttr;
-+     p_FmPort->p_FmPortDriverParam->dmaWriteOptimize                 = DEFAULT_PORT_dmaWriteOptimize;
-+     */
-+    p_FmPort->p_FmPortDriverParam->liodnBase = p_FmPortParams->liodnBase;
-+    p_FmPort->p_FmPortDriverParam->cheksumLastBytesIgnore =
-+            DEFAULT_PORT_cheksumLastBytesIgnore;
-+
-+    p_FmPort->maxFrameLength = DEFAULT_PORT_maxFrameLength;
-+    /* resource distribution. */
-+	p_FmPort->fifoBufs.num = DEFAULT_PORT_numOfFifoBufs(p_FmPort->portType)
-+			* BMI_FIFO_UNITS;
-+	p_FmPort->fifoBufs.extra = DEFAULT_PORT_extraNumOfFifoBufs
-+			* BMI_FIFO_UNITS;
-+	p_FmPort->openDmas.num = DEFAULT_PORT_numOfOpenDmas(p_FmPort->portType);
-+	p_FmPort->openDmas.extra =
-+			DEFAULT_PORT_extraNumOfOpenDmas(p_FmPort->portType);
-+	p_FmPort->tasks.num = DEFAULT_PORT_numOfTasks(p_FmPort->portType);
-+	p_FmPort->tasks.extra = DEFAULT_PORT_extraNumOfTasks(p_FmPort->portType);
-+
-+
-+#ifdef FM_HEAVY_TRAFFIC_SEQUENCER_HANG_ERRATA_FMAN_A006981
-+    if ((p_FmPort->fmRevInfo.majorRev == 6)
-+            && (p_FmPort->fmRevInfo.minorRev == 0)
-+            && ((p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+                    || (p_FmPort->portType == e_FM_PORT_TYPE_TX)))
-+    {
-+        p_FmPort->openDmas.num = 16;
-+        p_FmPort->openDmas.extra = 0;
-+    }
-+#endif /* FM_HEAVY_TRAFFIC_SEQUENCER_HANG_ERRATA_FMAN_A006981 */
-+
-+    /* Port type specific initialization: */
-+    switch (p_FmPort->portType)
-+    {
-+        case (e_FM_PORT_TYPE_RX):
-+        case (e_FM_PORT_TYPE_RX_10G):
-+            /* Initialize FM port parameters for initialization phase only */
-+            p_FmPort->p_FmPortDriverParam->cutBytesFromEnd =
-+                    DEFAULT_PORT_cutBytesFromEnd;
-+            p_FmPort->p_FmPortDriverParam->enBufPoolDepletion = FALSE;
-+            p_FmPort->p_FmPortDriverParam->frmDiscardOverride =
-+                    DEFAULT_PORT_frmDiscardOverride;
-+
-+                tmpReg =
-+                        GET_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfp);
-+			p_FmPort->p_FmPortDriverParam->rxFifoPriElevationLevel =
-+                        (((tmpReg & BMI_RX_FIFO_PRI_ELEVATION_MASK)
-+                                >> BMI_RX_FIFO_PRI_ELEVATION_SHIFT) + 1)
-+                                * BMI_FIFO_UNITS;
-+                p_FmPort->p_FmPortDriverParam->rxFifoThreshold = (((tmpReg
-+                        & BMI_RX_FIFO_THRESHOLD_MASK)
-+                        >> BMI_RX_FIFO_THRESHOLD_SHIFT) + 1) * BMI_FIFO_UNITS;
-+
-+            p_FmPort->p_FmPortDriverParam->bufMargins.endMargins =
-+                    DEFAULT_PORT_BufMargins_endMargins;
-+            p_FmPort->p_FmPortDriverParam->errorsToDiscard =
-+                    DEFAULT_PORT_errorsToDiscard;
-+            p_FmPort->p_FmPortDriverParam->forwardReuseIntContext =
-+                    DEFAULT_PORT_forwardIntContextReuse;
-+#if (DPAA_VERSION >= 11)
-+            p_FmPort->p_FmPortDriverParam->noScatherGather =
-+                    DEFAULT_PORT_noScatherGather;
-+#endif /* (DPAA_VERSION >= 11) */
-+            break;
-+
-+        case (e_FM_PORT_TYPE_TX):
-+            p_FmPort->p_FmPortDriverParam->dontReleaseBuf = FALSE;
-+#ifdef FM_WRONG_RESET_VALUES_ERRATA_FMAN_A005127
-+            tmpReg = 0x00001013;
-+            WRITE_UINT32( p_FmPort->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tfp,
-+                         tmpReg);
-+#endif /* FM_WRONG_RESET_VALUES_ERRATA_FMAN_A005127 */
-+        case (e_FM_PORT_TYPE_TX_10G):
-+                tmpReg =
-+                        GET_UINT32(p_FmPort->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tfp);
-+                p_FmPort->p_FmPortDriverParam->txFifoMinFillLevel = ((tmpReg
-+                        & BMI_TX_FIFO_MIN_FILL_MASK)
-+                        >> BMI_TX_FIFO_MIN_FILL_SHIFT) * BMI_FIFO_UNITS;
-+			p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth =
-+                        (uint8_t)(((tmpReg & BMI_FIFO_PIPELINE_DEPTH_MASK)
-+                                >> BMI_FIFO_PIPELINE_DEPTH_SHIFT) + 1);
-+                p_FmPort->p_FmPortDriverParam->txFifoLowComfLevel = (((tmpReg
-+                        & BMI_TX_LOW_COMF_MASK) >> BMI_TX_LOW_COMF_SHIFT) + 1)
-+                        * BMI_FIFO_UNITS;
-+
-+            p_FmPort->p_FmPortDriverParam->deqType = DEFAULT_PORT_deqType;
-+            p_FmPort->p_FmPortDriverParam->deqPrefetchOption =
-+                    DEFAULT_PORT_deqPrefetchOption;
-+            p_FmPort->p_FmPortDriverParam->deqHighPriority =
-+                    (bool)((p_FmPort->portType == e_FM_PORT_TYPE_TX) ? DEFAULT_PORT_deqHighPriority_1G :
-+                            DEFAULT_PORT_deqHighPriority_10G);
-+            p_FmPort->p_FmPortDriverParam->deqByteCnt =
-+                    (uint16_t)(
-+                            (p_FmPort->portType == e_FM_PORT_TYPE_TX) ? DEFAULT_PORT_deqByteCnt_1G :
-+                                    DEFAULT_PORT_deqByteCnt_10G);
-+            break;
-+        case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+            p_FmPort->p_FmPortDriverParam->errorsToDiscard =
-+                    DEFAULT_PORT_errorsToDiscard;
-+#if (DPAA_VERSION >= 11)
-+            p_FmPort->p_FmPortDriverParam->noScatherGather =
-+                    DEFAULT_PORT_noScatherGather;
-+#endif /* (DPAA_VERSION >= 11) */
-+        case (e_FM_PORT_TYPE_OH_HOST_COMMAND):
-+            p_FmPort->p_FmPortDriverParam->deqPrefetchOption =
-+                    DEFAULT_PORT_deqPrefetchOption_HC;
-+            p_FmPort->p_FmPortDriverParam->deqHighPriority =
-+                    DEFAULT_PORT_deqHighPriority_1G;
-+            p_FmPort->p_FmPortDriverParam->deqType = DEFAULT_PORT_deqType;
-+            p_FmPort->p_FmPortDriverParam->deqByteCnt =
-+                    DEFAULT_PORT_deqByteCnt_1G;
-+
-+                tmpReg =
-+                        GET_UINT32(p_FmPort->p_FmPortBmiRegs->ohPortBmiRegs.fmbm_ofp);
-+                p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth =
-+                        (uint8_t)(((tmpReg & BMI_FIFO_PIPELINE_DEPTH_MASK)
-+                                >> BMI_FIFO_PIPELINE_DEPTH_SHIFT) + 1);
-+                if ((p_FmPort->portType == e_FM_PORT_TYPE_OH_HOST_COMMAND)
-+                        && (p_FmPortParams->portId != FM_OH_PORT_ID))
-+                {
-+                    /* Overwrite HC defaults */
-+			p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth =
-+					DEFAULT_PORT_fifoDeqPipelineDepth_OH;
-+                }
-+
-+#ifndef FM_FRAME_END_PARAMS_FOR_OP
-+            if (p_FmPort->fmRevInfo.majorRev < 6)
-+            p_FmPort->p_FmPortDriverParam->cheksumLastBytesIgnore = DEFAULT_notSupported;
-+#endif /* !FM_FRAME_END_PARAMS_FOR_OP */
-+
-+#ifndef FM_DEQ_PIPELINE_PARAMS_FOR_OP
-+            if (!((p_FmPort->fmRevInfo.majorRev == 4) ||
-+                            (p_FmPort->fmRevInfo.majorRev >= 6)))
-+            p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth = DEFAULT_notSupported;
-+#endif /* !FM_DEQ_PIPELINE_PARAMS_FOR_OP */
-+            break;
-+
-+        default:
-+            XX_Free(p_FmPort->p_FmPortDriverParam);
-+            XX_Free(p_FmPort);
-+            REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Invalid port type"));
-+            return NULL;
-+    }
-+#ifdef FM_QMI_NO_DEQ_OPTIONS_SUPPORT
-+    if (p_FmPort->fmRevInfo.majorRev == 4)
-+    p_FmPort->p_FmPortDriverParam->deqPrefetchOption = (e_FmPortDeqPrefetchOption)DEFAULT_notSupported;
-+#endif /* FM_QMI_NO_DEQ_OPTIONS_SUPPORT */
-+
-+    p_FmPort->imEn = p_FmPortParams->independentModeEnable;
-+
-+    if (p_FmPort->imEn)
-+    {
-+        if ((p_FmPort->portType == e_FM_PORT_TYPE_TX)
-+                || (p_FmPort->portType == e_FM_PORT_TYPE_TX_10G))
-+            p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth =
-+                    DEFAULT_PORT_fifoDeqPipelineDepth_IM;
-+        FmPortConfigIM(p_FmPort, p_FmPortParams);
-+    }
-+    else
-+    {
-+        switch (p_FmPort->portType)
-+        {
-+            case (e_FM_PORT_TYPE_RX):
-+            case (e_FM_PORT_TYPE_RX_10G):
-+                /* Initialize FM port parameters for initialization phase only */
-+                memcpy(&p_FmPort->p_FmPortDriverParam->extBufPools,
-+                       &p_FmPortParams->specificParams.rxParams.extBufPools,
-+                       sizeof(t_FmExtPools));
-+                p_FmPort->p_FmPortDriverParam->errFqid =
-+                        p_FmPortParams->specificParams.rxParams.errFqid;
-+                p_FmPort->p_FmPortDriverParam->dfltFqid =
-+                        p_FmPortParams->specificParams.rxParams.dfltFqid;
-+                p_FmPort->p_FmPortDriverParam->liodnOffset =
-+                        p_FmPortParams->specificParams.rxParams.liodnOffset;
-+                break;
-+            case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+            case (e_FM_PORT_TYPE_TX):
-+            case (e_FM_PORT_TYPE_TX_10G):
-+            case (e_FM_PORT_TYPE_OH_HOST_COMMAND):
-+                p_FmPort->p_FmPortDriverParam->errFqid =
-+                        p_FmPortParams->specificParams.nonRxParams.errFqid;
-+                p_FmPort->p_FmPortDriverParam->deqSubPortal =
-+                        (uint8_t)(p_FmPortParams->specificParams.nonRxParams.qmChannel
-+                                & QMI_DEQ_CFG_SUBPORTAL_MASK);
-+                p_FmPort->p_FmPortDriverParam->dfltFqid =
-+                        p_FmPortParams->specificParams.nonRxParams.dfltFqid;
-+                break;
-+            default:
-+                XX_Free(p_FmPort->p_FmPortDriverParam);
-+                XX_Free(p_FmPort);
-+                REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Invalid port type"));
-+                return NULL;
-+        }
-+    }
-+
-+    memset(p_FmPort->name, 0, (sizeof(char)) * MODULE_NAME_SIZE);
-+    if (Sprint(
-+            p_FmPort->name,
-+            "FM-%d-port-%s-%d",
-+            FmGetId(p_FmPort->h_Fm),
-+            ((p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING
-+                    || (p_FmPort->portType == e_FM_PORT_TYPE_OH_HOST_COMMAND)) ? "OH" :
-+                    (p_FmPort->portType == e_FM_PORT_TYPE_RX ? "1g-RX" :
-+                            (p_FmPort->portType == e_FM_PORT_TYPE_TX ? "1g-TX" :
-+                                    (p_FmPort->portType
-+                                            == e_FM_PORT_TYPE_RX_10G ? "10g-RX" :
-+                                            "10g-TX")))),
-+            p_FmPort->portId) == 0)
-+    {
-+        XX_Free(p_FmPort->p_FmPortDriverParam);
-+        XX_Free(p_FmPort);
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Sprint failed"));
-+        return NULL;
-+    }
-+
-+    p_FmPort->h_Spinlock = XX_InitSpinlock();
-+    if (!p_FmPort->h_Spinlock)
-+    {
-+        XX_Free(p_FmPort->p_FmPortDriverParam);
-+        XX_Free(p_FmPort);
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Sprint failed"));
-+        return NULL;
-+    }
-+
-+    return p_FmPort;
-+}
-+
-+t_FmPort *rx_port = 0;
-+t_FmPort *tx_port = 0;
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_Init
-+
-+ @Description   Initializes the FM module
-+
-+ @Param[in]     h_FmPort - FM module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+ *//***************************************************************************/
-+t_Error FM_PORT_Init(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_FmPortDriverParam *p_DriverParams;
-+    t_Error errCode;
-+    t_FmInterModulePortInitParams fmParams;
-+    t_FmRevisionInfo revInfo;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    errCode = FmSpBuildBufferStructure(
-+            &p_FmPort->p_FmPortDriverParam->intContext,
-+            &p_FmPort->p_FmPortDriverParam->bufferPrefixContent,
-+            &p_FmPort->p_FmPortDriverParam->bufMargins,
-+            &p_FmPort->bufferOffsets, &p_FmPort->internalBufferOffset);
-+    if (errCode != E_OK)
-+        RETURN_ERROR(MAJOR, errCode, NO_MSG);
-+#ifdef FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669
-+    if ((p_FmPort->p_FmPortDriverParam->bcbWorkaround) &&
-+            (p_FmPort->portType == e_FM_PORT_TYPE_RX))
-+    {
-+        p_FmPort->p_FmPortDriverParam->errorsToDiscard |= FM_PORT_FRM_ERR_PHYSICAL;
-+        if (!p_FmPort->fifoBufs.num)
-+        p_FmPort->fifoBufs.num = DEFAULT_PORT_numOfFifoBufs(p_FmPort->portType)*BMI_FIFO_UNITS;
-+        p_FmPort->fifoBufs.num += 4*KILOBYTE;
-+    }
-+#endif /* FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669 */
-+
-+    CHECK_INIT_PARAMETERS(p_FmPort, CheckInitParameters);
-+
-+    p_DriverParams = p_FmPort->p_FmPortDriverParam;
-+
-+    /* Set up flibs port structure */
-+    memset(&p_FmPort->port, 0, sizeof(struct fman_port));
-+    p_FmPort->port.type = (enum fman_port_type)p_FmPort->portType;
-+    FM_GetRevision(p_FmPort->h_Fm, &revInfo);
-+    p_FmPort->port.fm_rev_maj = revInfo.majorRev;
-+    p_FmPort->port.fm_rev_min = revInfo.minorRev;
-+    p_FmPort->port.bmi_regs =
-+            (union fman_port_bmi_regs *)UINT_TO_PTR(p_DriverParams->baseAddr + BMI_PORT_REGS_OFFSET);
-+    p_FmPort->port.qmi_regs =
-+            (struct fman_port_qmi_regs *)UINT_TO_PTR(p_DriverParams->baseAddr + QMI_PORT_REGS_OFFSET);
-+    p_FmPort->port.ext_pools_num = (uint8_t)((revInfo.majorRev == 4) ? 4 : 8);
-+    p_FmPort->port.im_en = p_FmPort->imEn;
-+    p_FmPort->p_FmPortPrsRegs =
-+            (t_FmPortPrsRegs *)UINT_TO_PTR(p_DriverParams->baseAddr + PRS_PORT_REGS_OFFSET);
-+
-+    if (((p_FmPort->portType == e_FM_PORT_TYPE_RX_10G)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_RX)) && !p_FmPort->imEn)
-+    {
-+        /* Call the external Buffer routine which also checks fifo
-+         size and updates it if necessary */
-+        /* define external buffer pools and pool depletion*/
-+        errCode = SetExtBufferPools(p_FmPort);
-+        if (errCode)
-+            RETURN_ERROR(MAJOR, errCode, NO_MSG);
-+        /* check if the largest external buffer pool is large enough */
-+        if (p_DriverParams->bufMargins.startMargins + MIN_EXT_BUF_SIZE
-+                + p_DriverParams->bufMargins.endMargins
-+                > p_FmPort->rxPoolsParams.largestBufSize)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("bufMargins.startMargins (%d) + minimum buf size (64) + bufMargins.endMargins (%d) is larger than maximum external buffer size (%d)", p_DriverParams->bufMargins.startMargins, p_DriverParams->bufMargins.endMargins, p_FmPort->rxPoolsParams.largestBufSize));
-+    }
-+    if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+    {
-+        {
-+#ifdef FM_NO_OP_OBSERVED_POOLS
-+            t_FmRevisionInfo revInfo;
-+
-+            FM_GetRevision(p_FmPort->h_Fm, &revInfo);
-+            if ((revInfo.majorRev == 4) && (p_DriverParams->enBufPoolDepletion))
-+#endif /* FM_NO_OP_OBSERVED_POOLS */
-+            {
-+                /* define external buffer pools */
-+                errCode = SetExtBufferPools(p_FmPort);
-+                if (errCode)
-+                    RETURN_ERROR(MAJOR, errCode, NO_MSG);
-+            }
-+        }
-+    }
-+
-+    /************************************************************/
-+    /* Call FM module routine for communicating parameters      */
-+    /************************************************************/
-+    memset(&fmParams, 0, sizeof(fmParams));
-+    fmParams.hardwarePortId = p_FmPort->hardwarePortId;
-+    fmParams.portType = (e_FmPortType)p_FmPort->portType;
-+    fmParams.numOfTasks = (uint8_t)p_FmPort->tasks.num;
-+    fmParams.numOfExtraTasks = (uint8_t)p_FmPort->tasks.extra;
-+    fmParams.numOfOpenDmas = (uint8_t)p_FmPort->openDmas.num;
-+    fmParams.numOfExtraOpenDmas = (uint8_t)p_FmPort->openDmas.extra;
-+
-+    if (p_FmPort->fifoBufs.num)
-+    {
-+        errCode = VerifySizeOfFifo(p_FmPort);
-+        if (errCode != E_OK)
-+            RETURN_ERROR(MAJOR, errCode, NO_MSG);
-+    }
-+    fmParams.sizeOfFifo = p_FmPort->fifoBufs.num;
-+    fmParams.extraSizeOfFifo = p_FmPort->fifoBufs.extra;
-+    fmParams.independentMode = p_FmPort->imEn;
-+    fmParams.liodnOffset = p_DriverParams->liodnOffset;
-+    fmParams.liodnBase = p_DriverParams->liodnBase;
-+    fmParams.deqPipelineDepth =
-+            p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth;
-+    fmParams.maxFrameLength = p_FmPort->maxFrameLength;
-+#ifndef FM_DEQ_PIPELINE_PARAMS_FOR_OP
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING) ||
-+            (p_FmPort->portType == e_FM_PORT_TYPE_OH_HOST_COMMAND))
-+    {
-+        if (!((p_FmPort->fmRevInfo.majorRev == 4) ||
-+                        (p_FmPort->fmRevInfo.majorRev >= 6)))
-+        /* HC ports do not have fifoDeqPipelineDepth, but it is needed only
-+         * for deq threshold calculation.
-+         */
-+        fmParams.deqPipelineDepth = 2;
-+    }
-+#endif /* !FM_DEQ_PIPELINE_PARAMS_FOR_OP */
-+
-+    errCode = FmGetSetPortParams(p_FmPort->h_Fm, &fmParams);
-+    if (errCode)
-+        RETURN_ERROR(MAJOR, errCode, NO_MSG);
-+
-+    /* get params for use in init */
-+    p_FmPort->fmMuramPhysBaseAddr =
-+            (uint64_t)((uint64_t)(fmParams.fmMuramPhysBaseAddr.low)
-+                    | ((uint64_t)(fmParams.fmMuramPhysBaseAddr.high) << 32));
-+    p_FmPort->h_FmMuram = FmGetMuramHandle(p_FmPort->h_Fm);
-+
-+    errCode = InitLowLevelDriver(p_FmPort);
-+    if (errCode != E_OK)
-+        RETURN_ERROR(MAJOR, errCode, NO_MSG);
-+
-+    FmPortDriverParamFree(p_FmPort);
-+
-+#if (DPAA_VERSION >= 11)
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_RX_10G)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_RX)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING))
-+    {
-+        t_FmPcdCtrlParamsPage *p_ParamsPage;
-+
-+        FmPortSetGprFunc(p_FmPort, e_FM_PORT_GPR_MURAM_PAGE,
-+                         (void**)&p_ParamsPage);
-+        ASSERT_COND(p_ParamsPage);
-+
-+        WRITE_UINT32(p_ParamsPage->misc, FM_CTL_PARAMS_PAGE_ALWAYS_ON);
-+#ifdef FM_OP_NO_VSP_NO_RELEASE_ERRATA_FMAN_A006675
-+        if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+        {
-+            WRITE_UINT32(
-+                    p_ParamsPage->misc,
-+                    (GET_UINT32(p_ParamsPage->misc) | FM_CTL_PARAMS_PAGE_OP_FIX_EN));
-+            WRITE_UINT32(
-+                    p_ParamsPage->discardMask,
-+                    GET_UINT32(p_FmPort->p_FmPortBmiRegs->ohPortBmiRegs.fmbm_ofsdm));
-+        }
-+#endif /* FM_OP_NO_VSP_NO_RELEASE_ERRATA_FMAN_A006675 */
-+#ifdef FM_ERROR_VSP_NO_MATCH_SW006
-+        if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+            WRITE_UINT32(
-+                    p_ParamsPage->errorsDiscardMask,
-+                    (GET_UINT32(p_FmPort->p_FmPortBmiRegs->ohPortBmiRegs.fmbm_ofsdm) | GET_UINT32(p_FmPort->p_FmPortBmiRegs->ohPortBmiRegs.fmbm_ofsem)));
-+        else
-+            WRITE_UINT32(
-+                    p_ParamsPage->errorsDiscardMask,
-+                    (GET_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfsdm) | GET_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfsem)));
-+#endif /* FM_ERROR_VSP_NO_MATCH_SW006 */
-+    }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    if (p_FmPort->deepSleepVars.autoResMaxSizes)
-+        FmPortConfigAutoResForDeepSleepSupport1(p_FmPort);
-+    return E_OK;
-+}
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_Free
-+
-+ @Description   Frees all resources that were assigned to FM module.
-+
-+ Calling this routine invalidates the descriptor.
-+
-+ @Param[in]     h_FmPort - FM module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+ *//***************************************************************************/
-+t_Error FM_PORT_Free(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_FmInterModulePortFreeParams fmParams;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+
-+    if (p_FmPort->pcdEngines)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_STATE,
-+                ("Trying to free a port with PCD. FM_PORT_DeletePCD must be called first."));
-+
-+    if (p_FmPort->enabled)
-+    {
-+        if (FM_PORT_Disable(p_FmPort) != E_OK)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM_PORT_Disable FAILED"));
-+    }
-+
-+    if (p_FmPort->imEn)
-+        FmPortImFree(p_FmPort);
-+
-+    FmPortDriverParamFree(p_FmPort);
-+
-+    memset(&fmParams, 0, sizeof(fmParams));
-+    fmParams.hardwarePortId = p_FmPort->hardwarePortId;
-+    fmParams.portType = (e_FmPortType)p_FmPort->portType;
-+    fmParams.deqPipelineDepth =
-+            p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth;
-+
-+    FmFreePortParams(p_FmPort->h_Fm, &fmParams);
-+
-+#if (DPAA_VERSION >= 11)
-+    if (FmVSPFreeForPort(p_FmPort->h_Fm, p_FmPort->portType, p_FmPort->portId)
-+            != E_OK)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("VSP free of port FAILED"));
-+
-+    if (p_FmPort->p_ParamsPage)
-+        FM_MURAM_FreeMem(p_FmPort->h_FmMuram, p_FmPort->p_ParamsPage);
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    if (p_FmPort->h_Spinlock)
-+        XX_FreeSpinlock(p_FmPort->h_Spinlock);
-+
-+    XX_Free(p_FmPort);
-+
-+    return E_OK;
-+}
-+
-+/*************************************************/
-+/*       API Advanced Init unit functions        */
-+/*************************************************/
-+
-+t_Error FM_PORT_ConfigNumOfOpenDmas(t_Handle h_FmPort, t_FmPortRsrc *p_OpenDmas)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmPort->p_FmPortDriverParam->setNumOfOpenDmas = TRUE;
-+    memcpy(&p_FmPort->openDmas, p_OpenDmas, sizeof(t_FmPortRsrc));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigNumOfTasks(t_Handle h_FmPort, t_FmPortRsrc *p_NumOfTasks)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    memcpy(&p_FmPort->tasks, p_NumOfTasks, sizeof(t_FmPortRsrc));
-+    p_FmPort->p_FmPortDriverParam->setNumOfTasks = TRUE;
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigSizeOfFifo(t_Handle h_FmPort, t_FmPortRsrc *p_SizeOfFifo)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmPort->p_FmPortDriverParam->setSizeOfFifo = TRUE;
-+    memcpy(&p_FmPort->fifoBufs, p_SizeOfFifo, sizeof(t_FmPortRsrc));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigDeqHighPriority(t_Handle h_FmPort, bool highPri)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_RX_10G)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_RX))
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("not available for Rx ports"));
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.deq_high_pri = highPri;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigDeqType(t_Handle h_FmPort, e_FmPortDeqType deqType)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_RX_10G)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_RX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("not available for Rx ports"));
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.deq_type =
-+            (enum fman_port_deq_type)deqType;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigDeqPrefetchOption(
-+        t_Handle h_FmPort, e_FmPortDeqPrefetchOption deqPrefetchOption)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_RX_10G)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_RX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("not available for Rx ports"));
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.deq_prefetch_opt =
-+            (enum fman_port_deq_prefetch)deqPrefetchOption;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigBackupPools(t_Handle h_FmPort,
-+                                  t_FmBackupBmPools *p_BackupBmPools)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for Rx ports only"));
-+
-+    p_FmPort->p_FmPortDriverParam->p_BackupBmPools =
-+            (t_FmBackupBmPools *)XX_Malloc(sizeof(t_FmBackupBmPools));
-+    if (!p_FmPort->p_FmPortDriverParam->p_BackupBmPools)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("p_BackupBmPools allocation failed"));
-+    memcpy(p_FmPort->p_FmPortDriverParam->p_BackupBmPools, p_BackupBmPools,
-+           sizeof(t_FmBackupBmPools));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigDeqByteCnt(t_Handle h_FmPort, uint16_t deqByteCnt)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_RX_10G)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_RX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("not available for Rx ports"));
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.deq_byte_cnt = deqByteCnt;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigBufferPrefixContent(
-+        t_Handle h_FmPort, t_FmBufferPrefixContent *p_FmBufferPrefixContent)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    memcpy(&p_FmPort->p_FmPortDriverParam->bufferPrefixContent,
-+           p_FmBufferPrefixContent, sizeof(t_FmBufferPrefixContent));
-+    /* if dataAlign was not initialized by user, we return to driver's default */
-+    if (!p_FmPort->p_FmPortDriverParam->bufferPrefixContent.dataAlign)
-+        p_FmPort->p_FmPortDriverParam->bufferPrefixContent.dataAlign =
-+                DEFAULT_PORT_bufferPrefixContent_dataAlign;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigCheksumLastBytesIgnore(t_Handle h_FmPort,
-+                                             uint8_t checksumLastBytesIgnore)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.checksum_bytes_ignore =
-+            checksumLastBytesIgnore;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigCutBytesFromEnd(t_Handle h_FmPort,
-+                                      uint8_t cutBytesFromEnd)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for Rx ports only"));
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.rx_cut_end_bytes = cutBytesFromEnd;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigPoolDepletion(t_Handle h_FmPort,
-+                                    t_FmBufPoolDepletion *p_BufPoolDepletion)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for Rx ports only"));
-+
-+    p_FmPort->p_FmPortDriverParam->enBufPoolDepletion = TRUE;
-+    memcpy(&p_FmPort->p_FmPortDriverParam->bufPoolDepletion, p_BufPoolDepletion,
-+           sizeof(t_FmBufPoolDepletion));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigObservedPoolDepletion(
-+        t_Handle h_FmPort,
-+        t_FmPortObservedBufPoolDepletion *p_FmPortObservedBufPoolDepletion)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    if (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for OP ports only"));
-+
-+    p_FmPort->p_FmPortDriverParam->enBufPoolDepletion = TRUE;
-+    memcpy(&p_FmPort->p_FmPortDriverParam->bufPoolDepletion,
-+           &p_FmPortObservedBufPoolDepletion->poolDepletionParams,
-+           sizeof(t_FmBufPoolDepletion));
-+    memcpy(&p_FmPort->p_FmPortDriverParam->extBufPools,
-+           &p_FmPortObservedBufPoolDepletion->poolsParams,
-+           sizeof(t_FmExtPools));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigExtBufPools(t_Handle h_FmPort, t_FmExtPools *p_FmExtPools)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    if (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for OP ports only"));
-+
-+    memcpy(&p_FmPort->p_FmPortDriverParam->extBufPools, p_FmExtPools,
-+           sizeof(t_FmExtPools));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigDontReleaseTxBufToBM(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_TX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_TX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for Tx ports only"));
-+
-+    p_FmPort->p_FmPortDriverParam->dontReleaseBuf = TRUE;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigDfltColor(t_Handle h_FmPort, e_FmPortColor color)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.color = (enum fman_port_color)color;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigSyncReq(t_Handle h_FmPort, bool syncReq)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_TX_10G)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_TX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("Not available for Tx ports"));
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.sync_req = syncReq;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigFrmDiscardOverride(t_Handle h_FmPort, bool override)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_TX_10G)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_TX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("Not available for Tx ports"));
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.discard_override = override;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigErrorsToDiscard(t_Handle h_FmPort,
-+                                      fmPortFrameErrSelect_t errs)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING))
-+        RETURN_ERROR( MAJOR, E_INVALID_OPERATION,
-+                     ("available for Rx and offline parsing ports only"));
-+
-+    p_FmPort->p_FmPortDriverParam->errorsToDiscard = errs;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigDmaSwapData(t_Handle h_FmPort, e_FmDmaSwapOption swapData)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.dma_swap_data =
-+            (enum fman_port_dma_swap)swapData;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigDmaIcCacheAttr(t_Handle h_FmPort,
-+                                     e_FmDmaCacheOption intContextCacheAttr)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.dma_ic_stash_on =
-+            (bool)(intContextCacheAttr == e_FM_DMA_STASH);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigDmaHdrAttr(t_Handle h_FmPort,
-+                                 e_FmDmaCacheOption headerCacheAttr)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.dma_header_stash_on =
-+            (bool)(headerCacheAttr == e_FM_DMA_STASH);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigDmaScatterGatherAttr(
-+        t_Handle h_FmPort, e_FmDmaCacheOption scatterGatherCacheAttr)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.dma_sg_stash_on =
-+            (bool)(scatterGatherCacheAttr == e_FM_DMA_STASH);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigDmaWriteOptimize(t_Handle h_FmPort, bool optimize)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_TX_10G)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_TX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("Not available for Tx ports"));
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.dma_write_optimize = optimize;
-+
-+    return E_OK;
-+}
-+
-+#if (DPAA_VERSION >= 11)
-+t_Error FM_PORT_ConfigNoScatherGather(t_Handle h_FmPort, bool noScatherGather)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    UNUSED(noScatherGather);
-+    UNUSED(p_FmPort);
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmPort->p_FmPortDriverParam->noScatherGather = noScatherGather;
-+
-+    return E_OK;
-+}
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+t_Error FM_PORT_ConfigForwardReuseIntContext(t_Handle h_FmPort,
-+                                             bool forwardReuse)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for Rx ports only"));
-+
-+    p_FmPort->p_FmPortDriverParam->forwardReuseIntContext = forwardReuse;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigMaxFrameLength(t_Handle h_FmPort, uint16_t length)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmPort->maxFrameLength = length;
-+
-+    return E_OK;
-+}
-+
-+#ifdef FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669
-+t_Error FM_PORT_ConfigBCBWorkaround(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmPort->p_FmPortDriverParam->bcbWorkaround = TRUE;
-+
-+    return E_OK;
-+}
-+#endif /* FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669 */
-+
-+/****************************************************/
-+/*       Hidden-DEBUG Only API                      */
-+/****************************************************/
-+
-+t_Error FM_PORT_ConfigTxFifoMinFillLevel(t_Handle h_FmPort,
-+                                         uint32_t minFillLevel)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_TX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_TX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for Tx ports only"));
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_min_level = minFillLevel;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigFifoDeqPipelineDepth(t_Handle h_FmPort,
-+                                           uint8_t deqPipelineDepth)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_RX_10G)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_RX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("Not available for Rx ports"));
-+
-+    if (p_FmPort->imEn)
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("Not available for IM ports!"));
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_deq_pipeline_depth =
-+            deqPipelineDepth;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigTxFifoLowComfLevel(t_Handle h_FmPort,
-+                                         uint32_t fifoLowComfLevel)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_TX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_TX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for Tx ports only"));
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.tx_fifo_low_comf_level =
-+            fifoLowComfLevel;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigRxFifoThreshold(t_Handle h_FmPort, uint32_t fifoThreshold)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for Rx ports only"));
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.rx_fifo_thr = fifoThreshold;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigRxFifoPriElevationLevel(t_Handle h_FmPort,
-+                                              uint32_t priElevationLevel)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for Rx ports only"));
-+
-+    p_FmPort->p_FmPortDriverParam->dfltCfg.rx_pri_elevation = priElevationLevel;
-+
-+    return E_OK;
-+}
-+/****************************************************/
-+/*       API Run-time Control unit functions        */
-+/****************************************************/
-+
-+t_Error FM_PORT_SetNumOfOpenDmas(t_Handle h_FmPort,
-+                                 t_FmPortRsrc *p_NumOfOpenDmas)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    if ((!p_NumOfOpenDmas->num) || (p_NumOfOpenDmas->num > MAX_NUM_OF_DMAS))
-+        RETURN_ERROR( MAJOR, E_INVALID_VALUE,
-+                     ("openDmas-num can't be larger than %d", MAX_NUM_OF_DMAS));
-+    if (p_NumOfOpenDmas->extra > MAX_NUM_OF_EXTRA_DMAS)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("openDmas-extra can't be larger than %d", MAX_NUM_OF_EXTRA_DMAS));
-+    err = FmSetNumOfOpenDmas(p_FmPort->h_Fm, p_FmPort->hardwarePortId,
-+                             (uint8_t*)&p_NumOfOpenDmas->num,
-+                             (uint8_t*)&p_NumOfOpenDmas->extra, FALSE);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    memcpy(&p_FmPort->openDmas, p_NumOfOpenDmas, sizeof(t_FmPortRsrc));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_SetNumOfTasks(t_Handle h_FmPort, t_FmPortRsrc *p_NumOfTasks)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    /* only driver uses host command port, so ASSERT rather than  RETURN_ERROR */
-+    ASSERT_COND(p_FmPort->portType != e_FM_PORT_TYPE_OH_HOST_COMMAND);
-+
-+    if ((!p_NumOfTasks->num) || (p_NumOfTasks->num > MAX_NUM_OF_TASKS))
-+        RETURN_ERROR(
-+                MAJOR, E_INVALID_VALUE,
-+                ("NumOfTasks-num can't be larger than %d", MAX_NUM_OF_TASKS));
-+    if (p_NumOfTasks->extra > MAX_NUM_OF_EXTRA_TASKS)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("NumOfTasks-extra can't be larger than %d", MAX_NUM_OF_EXTRA_TASKS));
-+
-+    err = FmSetNumOfTasks(p_FmPort->h_Fm, p_FmPort->hardwarePortId,
-+                          (uint8_t*)&p_NumOfTasks->num,
-+                          (uint8_t*)&p_NumOfTasks->extra, FALSE);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    /* update driver's struct */
-+    memcpy(&p_FmPort->tasks, p_NumOfTasks, sizeof(t_FmPortRsrc));
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_SetSizeOfFifo(t_Handle h_FmPort, t_FmPortRsrc *p_SizeOfFifo)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_Error err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    if (!p_SizeOfFifo->num || (p_SizeOfFifo->num > MAX_PORT_FIFO_SIZE))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("SizeOfFifo-num has to be in the range of 256 - %d", MAX_PORT_FIFO_SIZE));
-+    if (p_SizeOfFifo->num % BMI_FIFO_UNITS)
-+        RETURN_ERROR(
-+                MAJOR, E_INVALID_VALUE,
-+                ("SizeOfFifo-num has to be divisible by %d", BMI_FIFO_UNITS));
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_RX)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G))
-+    {
-+        /* extra FIFO size (allowed only to Rx ports) */
-+        if (p_SizeOfFifo->extra % BMI_FIFO_UNITS)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("SizeOfFifo-extra has to be divisible by %d", BMI_FIFO_UNITS));
-+    }
-+    else
-+        if (p_SizeOfFifo->extra)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                         (" No SizeOfFifo-extra for non Rx ports"));
-+
-+    memcpy(&p_FmPort->fifoBufs, p_SizeOfFifo, sizeof(t_FmPortRsrc));
-+
-+    /* we do not change user's parameter */
-+    err = VerifySizeOfFifo(p_FmPort);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    err = FmSetSizeOfFifo(p_FmPort->h_Fm, p_FmPort->hardwarePortId,
-+                          &p_SizeOfFifo->num, &p_SizeOfFifo->extra, FALSE);
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+uint32_t FM_PORT_GetBufferDataOffset(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmPort, E_INVALID_HANDLE, 0);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE,
-+                              0);
-+
-+    return p_FmPort->bufferOffsets.dataOffset;
-+}
-+
-+uint8_t * FM_PORT_GetBufferICInfo(t_Handle h_FmPort, char *p_Data)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmPort, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE,
-+                              NULL);
-+
-+    if (p_FmPort->bufferOffsets.pcdInfoOffset == ILLEGAL_BASE)
-+        return NULL;
-+
-+    return (uint8_t *)PTR_MOVE(p_Data, p_FmPort->bufferOffsets.pcdInfoOffset);
-+}
-+
-+t_FmPrsResult * FM_PORT_GetBufferPrsResult(t_Handle h_FmPort, char *p_Data)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmPort, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE,
-+                              NULL);
-+
-+    if (p_FmPort->bufferOffsets.prsResultOffset == ILLEGAL_BASE)
-+        return NULL;
-+
-+    return (t_FmPrsResult *)PTR_MOVE(p_Data, p_FmPort->bufferOffsets.prsResultOffset);
-+}
-+
-+uint64_t * FM_PORT_GetBufferTimeStamp(t_Handle h_FmPort, char *p_Data)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmPort, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE,
-+                              NULL);
-+
-+    if (p_FmPort->bufferOffsets.timeStampOffset == ILLEGAL_BASE)
-+        return NULL;
-+
-+    return (uint64_t *)PTR_MOVE(p_Data, p_FmPort->bufferOffsets.timeStampOffset);
-+}
-+
-+uint8_t * FM_PORT_GetBufferHashResult(t_Handle h_FmPort, char *p_Data)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmPort, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE,
-+                              NULL);
-+
-+    if (p_FmPort->bufferOffsets.hashResultOffset == ILLEGAL_BASE)
-+        return NULL;
-+
-+    return (uint8_t *)PTR_MOVE(p_Data, p_FmPort->bufferOffsets.hashResultOffset);
-+}
-+
-+t_Error FM_PORT_Disable(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    int err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    if (p_FmPort->imEn)
-+        FmPortImDisable(p_FmPort);
-+
-+    err = fman_port_disable(&p_FmPort->port);
-+    if (err == -EBUSY)
-+    {
-+        DBG(WARNING, ("%s: BMI or QMI is Busy. Port forced down",
-+               p_FmPort->name));
-+    }
-+    else
-+        if (err != 0)
-+        {
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fman_port_disable"));
-+        }
-+
-+    p_FmPort->enabled = FALSE;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_Enable(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    int err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    /* Used by FM_PORT_Free routine as indication
-+     if to disable port. Thus set it to TRUE prior
-+     to enabling itself. This way if part of enable
-+     process fails there will be still things
-+     to disable during Free. For example, if BMI
-+     enable succeeded but QMI failed, still  BMI
-+     needs to be disabled by Free. */
-+    p_FmPort->enabled = TRUE;
-+
-+    if (p_FmPort->imEn)
-+        FmPortImEnable(p_FmPort);
-+
-+    err = fman_port_enable(&p_FmPort->port);
-+    if (err != 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fman_port_enable"));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_SetRateLimit(t_Handle h_FmPort, t_FmPortRateLimit *p_RateLimit)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    uint8_t factor, countUnitBit;
-+    uint16_t baseGran;
-+    struct fman_port_rate_limiter params;
-+    int err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    switch (p_FmPort->portType)
-+    {
-+        case (e_FM_PORT_TYPE_TX_10G):
-+        case (e_FM_PORT_TYPE_TX):
-+            baseGran = BMI_RATE_LIMIT_GRAN_TX;
-+            break;
-+        case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+            baseGran = BMI_RATE_LIMIT_GRAN_OP;
-+            break;
-+        default:
-+            RETURN_ERROR( MAJOR, E_INVALID_OPERATION,
-+                         ("available for Tx and Offline parsing ports only"));
-+    }
-+
-+    countUnitBit = (uint8_t)FmGetTimeStampScale(p_FmPort->h_Fm); /* TimeStamp per nano seconds units */
-+    /* normally, we use 1 usec as the reference count */
-+    factor = 1;
-+    /* if ratelimit is too small for a 1usec factor, multiply the factor */
-+    while (p_RateLimit->rateLimit < baseGran / factor)
-+    {
-+        if (countUnitBit == 31)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Rate limit is too small"));
-+
-+        countUnitBit++;
-+        factor <<= 1;
-+    }
-+    /* if ratelimit is too large for a 1usec factor, it is also larger than max rate*/
-+    if (p_RateLimit->rateLimit
-+            > ((uint32_t)baseGran * (1 << 10) * (uint32_t)factor))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Rate limit is too large"));
-+
-+    if (!p_RateLimit->maxBurstSize
-+            || (p_RateLimit->maxBurstSize > BMI_RATE_LIMIT_MAX_BURST_SIZE))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("maxBurstSize must be between 1K and %dk", BMI_RATE_LIMIT_MAX_BURST_SIZE));
-+
-+    params.count_1micro_bit = (uint8_t)FmGetTimeStampScale(p_FmPort->h_Fm);
-+    params.high_burst_size_gran = FALSE;
-+    params.burst_size = p_RateLimit->maxBurstSize;
-+    params.rate = p_RateLimit->rateLimit;
-+    params.rate_factor = E_FMAN_PORT_RATE_DOWN_NONE;
-+
-+    if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+    {
-+#ifndef FM_NO_ADVANCED_RATE_LIMITER
-+
-+        if ((p_FmPort->fmRevInfo.majorRev == 4)
-+                || (p_FmPort->fmRevInfo.majorRev >= 6))
-+        {
-+            params.high_burst_size_gran = TRUE;
-+        }
-+        else
-+#endif /* ! FM_NO_ADVANCED_RATE_LIMITER */
-+        {
-+            if (p_RateLimit->rateLimitDivider
-+                    != e_FM_PORT_DUAL_RATE_LIMITER_NONE)
-+                RETURN_ERROR(MAJOR, E_NOT_SUPPORTED,
-+                             ("FM_PORT_ConfigDualRateLimitScaleDown"));
-+
-+            if (p_RateLimit->maxBurstSize % 1000)
-+            {
-+                p_RateLimit->maxBurstSize =
-+                        (uint16_t)((p_RateLimit->maxBurstSize / 1000) + 1);
-+                DBG(WARNING, ("rateLimit.maxBurstSize rounded up to %d", (p_RateLimit->maxBurstSize/1000+1)*1000));
-+            }
-+            else
-+                p_RateLimit->maxBurstSize = (uint16_t)(p_RateLimit->maxBurstSize
-+                        / 1000);
-+        }
-+        params.rate_factor =
-+                (enum fman_port_rate_limiter_scale_down)p_RateLimit->rateLimitDivider;
-+        params.burst_size = p_RateLimit->maxBurstSize;
-+    }
-+
-+    err = fman_port_set_rate_limiter(&p_FmPort->port, &params);
-+    if (err != 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fman_port_set_rate_limiter"));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_DeleteRateLimit(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    int err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_RX_10G)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_RX)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_OH_HOST_COMMAND))
-+        RETURN_ERROR( MAJOR, E_INVALID_OPERATION,
-+                     ("available for Tx and Offline parsing ports only"));
-+
-+    err = fman_port_delete_rate_limiter(&p_FmPort->port);
-+    if (err != 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fman_port_set_rate_limiter"));
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_SetPfcPrioritiesMappingToQmanWQ(t_Handle h_FmPort, uint8_t prio,
-+                                                uint8_t wq)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    uint32_t tmpReg;
-+    uint32_t wqTmpReg;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_TX)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_TX_10G))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("PFC mapping is available for Tx ports only"));
-+
-+    if (prio > 7)
-+        RETURN_ERROR(MAJOR, E_NOT_IN_RANGE,
-+                     ("PFC priority (%d) is out of range (0-7)", prio));
-+    if (wq > 7)
-+        RETURN_ERROR(MAJOR, E_NOT_IN_RANGE,
-+                     ("WQ (%d) is out of range (0-7)", wq));
-+
-+    tmpReg = GET_UINT32(p_FmPort->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tpfcm[0]);
-+    tmpReg &= ~(0xf << ((7 - prio) * 4));
-+    wqTmpReg = ((uint32_t)wq << ((7 - prio) * 4));
-+    tmpReg |= wqTmpReg;
-+
-+    WRITE_UINT32(p_FmPort->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tpfcm[0],
-+                 tmpReg);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_SetFrameQueueCounters(t_Handle h_FmPort, bool enable)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    fman_port_set_queue_cnt_mode(&p_FmPort->port, enable);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_SetPerformanceCounters(t_Handle h_FmPort, bool enable)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    int err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    err = fman_port_set_perf_cnt_mode(&p_FmPort->port, enable);
-+    if (err != 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fman_port_set_perf_cnt_mode"));
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_SetPerformanceCountersParams(
-+        t_Handle h_FmPort, t_FmPortPerformanceCnt *p_FmPortPerformanceCnt)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    struct fman_port_perf_cnt_params params;
-+    int err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+
-+    /* check parameters */
-+    if (!p_FmPortPerformanceCnt->taskCompVal
-+            || (p_FmPortPerformanceCnt->taskCompVal > p_FmPort->tasks.num))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("taskCompVal (%d) has to be in the range of 1 - %d (current value)!", p_FmPortPerformanceCnt->taskCompVal, p_FmPort->tasks.num));
-+    if (!p_FmPortPerformanceCnt->dmaCompVal
-+            || (p_FmPortPerformanceCnt->dmaCompVal > p_FmPort->openDmas.num))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("dmaCompVal (%d) has to be in the range of 1 - %d (current value)!", p_FmPortPerformanceCnt->dmaCompVal, p_FmPort->openDmas.num));
-+    if (!p_FmPortPerformanceCnt->fifoCompVal
-+            || (p_FmPortPerformanceCnt->fifoCompVal > p_FmPort->fifoBufs.num))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("fifoCompVal (%d) has to be in the range of 256 - %d (current value)!", p_FmPortPerformanceCnt->fifoCompVal, p_FmPort->fifoBufs.num));
-+    if (p_FmPortPerformanceCnt->fifoCompVal % BMI_FIFO_UNITS)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("fifoCompVal (%d) has to be divisible by %d", p_FmPortPerformanceCnt->fifoCompVal, BMI_FIFO_UNITS));
-+
-+    switch (p_FmPort->portType)
-+    {
-+        case (e_FM_PORT_TYPE_RX_10G):
-+        case (e_FM_PORT_TYPE_RX):
-+            if (!p_FmPortPerformanceCnt->queueCompVal
-+                    || (p_FmPortPerformanceCnt->queueCompVal
-+                            > MAX_PERFORMANCE_RX_QUEUE_COMP))
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_INVALID_VALUE,
-+                        ("performanceCnt.queueCompVal for Rx has to be in the range of 1 - %d", MAX_PERFORMANCE_RX_QUEUE_COMP));
-+            break;
-+        case (e_FM_PORT_TYPE_TX_10G):
-+        case (e_FM_PORT_TYPE_TX):
-+            if (!p_FmPortPerformanceCnt->queueCompVal
-+                    || (p_FmPortPerformanceCnt->queueCompVal
-+                            > MAX_PERFORMANCE_TX_QUEUE_COMP))
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_INVALID_VALUE,
-+                        ("performanceCnt.queueCompVal for Tx has to be in the range of 1 - %d", MAX_PERFORMANCE_TX_QUEUE_COMP));
-+            break;
-+        case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+        case (e_FM_PORT_TYPE_OH_HOST_COMMAND):
-+            if (p_FmPortPerformanceCnt->queueCompVal)
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_INVALID_VALUE,
-+                        ("performanceCnt.queueCompVal is not relevant for H/O ports."));
-+            break;
-+        default:
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Invalid port type"));
-+    }
-+
-+    params.task_val = p_FmPortPerformanceCnt->taskCompVal;
-+    params.queue_val = p_FmPortPerformanceCnt->queueCompVal;
-+    params.dma_val = p_FmPortPerformanceCnt->dmaCompVal;
-+    params.fifo_val = p_FmPortPerformanceCnt->fifoCompVal;
-+
-+    err = fman_port_set_perf_cnt_params(&p_FmPort->port, &params);
-+    if (err != 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fman_port_set_perf_cnt_params"));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_AnalyzePerformanceParams(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_FmPortPerformanceCnt currParams, savedParams;
-+    t_Error err;
-+    bool underTest, failed = FALSE;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+
-+    XX_Print("Analyzing Performance parameters for port (type %d, id%d)\n",
-+             p_FmPort->portType, p_FmPort->portId);
-+
-+    currParams.taskCompVal = (uint8_t)p_FmPort->tasks.num;
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_OH_HOST_COMMAND))
-+        currParams.queueCompVal = 0;
-+    else
-+        currParams.queueCompVal = 1;
-+    currParams.dmaCompVal = (uint8_t)p_FmPort->openDmas.num;
-+    currParams.fifoCompVal = p_FmPort->fifoBufs.num;
-+
-+    FM_PORT_SetPerformanceCounters(p_FmPort, FALSE);
-+    ClearPerfCnts(p_FmPort);
-+    if ((err = FM_PORT_SetPerformanceCountersParams(p_FmPort, &currParams))
-+            != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    FM_PORT_SetPerformanceCounters(p_FmPort, TRUE);
-+    XX_UDelay(1000000);
-+    FM_PORT_SetPerformanceCounters(p_FmPort, FALSE);
-+    if (FM_PORT_GetCounter(p_FmPort, e_FM_PORT_COUNTERS_TASK_UTIL))
-+    {
-+        XX_Print(
-+                "Max num of defined port tasks (%d) utilized - Please enlarge\n",
-+                p_FmPort->tasks.num);
-+        failed = TRUE;
-+    }
-+    if (FM_PORT_GetCounter(p_FmPort, e_FM_PORT_COUNTERS_DMA_UTIL))
-+    {
-+        XX_Print(
-+                "Max num of defined port openDmas (%d) utilized - Please enlarge\n",
-+                p_FmPort->openDmas.num);
-+        failed = TRUE;
-+    }
-+    if (FM_PORT_GetCounter(p_FmPort, e_FM_PORT_COUNTERS_FIFO_UTIL))
-+    {
-+        XX_Print(
-+                "Max size of defined port fifo (%d) utilized - Please enlarge\n",
-+                p_FmPort->fifoBufs.num);
-+        failed = TRUE;
-+    }
-+    if (failed)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+
-+    memset(&savedParams, 0, sizeof(savedParams));
-+    while (TRUE)
-+    {
-+        underTest = FALSE;
-+        if ((currParams.taskCompVal != 1) && !savedParams.taskCompVal)
-+        {
-+            currParams.taskCompVal--;
-+            underTest = TRUE;
-+        }
-+        if ((currParams.dmaCompVal != 1) && !savedParams.dmaCompVal)
-+        {
-+            currParams.dmaCompVal--;
-+            underTest = TRUE;
-+        }
-+        if ((currParams.fifoCompVal != BMI_FIFO_UNITS)
-+                && !savedParams.fifoCompVal)
-+        {
-+            currParams.fifoCompVal -= BMI_FIFO_UNITS;
-+            underTest = TRUE;
-+        }
-+        if (!underTest)
-+            break;
-+
-+        ClearPerfCnts(p_FmPort);
-+        if ((err = FM_PORT_SetPerformanceCountersParams(p_FmPort, &currParams))
-+                != E_OK)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        FM_PORT_SetPerformanceCounters(p_FmPort, TRUE);
-+        XX_UDelay(1000000);
-+        FM_PORT_SetPerformanceCounters(p_FmPort, FALSE);
-+
-+        if (!savedParams.taskCompVal
-+                && FM_PORT_GetCounter(p_FmPort, e_FM_PORT_COUNTERS_TASK_UTIL))
-+            savedParams.taskCompVal = (uint8_t)(currParams.taskCompVal + 2);
-+        if (!savedParams.dmaCompVal
-+                && FM_PORT_GetCounter(p_FmPort, e_FM_PORT_COUNTERS_DMA_UTIL))
-+            savedParams.dmaCompVal = (uint8_t)(currParams.dmaCompVal + 2);
-+        if (!savedParams.fifoCompVal
-+                && FM_PORT_GetCounter(p_FmPort, e_FM_PORT_COUNTERS_FIFO_UTIL))
-+            savedParams.fifoCompVal = currParams.fifoCompVal
-+                    + (2 * BMI_FIFO_UNITS);
-+    }
-+
-+    XX_Print("best vals: tasks %d, dmas %d, fifos %d\n",
-+             savedParams.taskCompVal, savedParams.dmaCompVal,
-+             savedParams.fifoCompVal);
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_SetStatisticsCounters(t_Handle h_FmPort, bool enable)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    int err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    err = fman_port_set_stats_cnt_mode(&p_FmPort->port, enable);
-+    if (err != 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fman_port_set_stats_cnt_mode"));
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_SetErrorsRoute(t_Handle h_FmPort, fmPortFrameErrSelect_t errs)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    volatile uint32_t *p_ErrDiscard = NULL;
-+    int err;
-+
-+    UNUSED(p_ErrDiscard);
-+    err = fman_port_set_err_mask(&p_FmPort->port, (uint32_t)errs);
-+    if (err != 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fman_port_set_err_mask"));
-+
-+#ifdef FM_ERROR_VSP_NO_MATCH_SW006
-+    if (p_FmPort->fmRevInfo.majorRev >= 6)
-+    {
-+        t_FmPcdCtrlParamsPage *p_ParamsPage;
-+
-+        FmPortSetGprFunc(p_FmPort, e_FM_PORT_GPR_MURAM_PAGE,
-+                         (void**)&p_ParamsPage);
-+        ASSERT_COND(p_ParamsPage);
-+        switch (p_FmPort->portType)
-+        {
-+            case (e_FM_PORT_TYPE_RX_10G):
-+            case (e_FM_PORT_TYPE_RX):
-+                p_ErrDiscard =
-+                        &p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfsdm;
-+                break;
-+            case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+                p_ErrDiscard =
-+                        &p_FmPort->p_FmPortBmiRegs->ohPortBmiRegs.fmbm_ofsdm;
-+                break;
-+            default:
-+                RETURN_ERROR(
-+                        MAJOR, E_INVALID_OPERATION,
-+                        ("available for Rx and offline parsing ports only"));
-+        }
-+        WRITE_UINT32(p_ParamsPage->errorsDiscardMask,
-+                     GET_UINT32(*p_ErrDiscard) | errs);
-+    }
-+#endif /* FM_ERROR_VSP_NO_MATCH_SW006 */
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_SetAllocBufCounter(t_Handle h_FmPort, uint8_t poolId,
-+                                   bool enable)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    int err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(poolId<BM_MAX_NUM_OF_POOLS, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for Rx ports only"));
-+
-+    err = fman_port_set_bpool_cnt_mode(&p_FmPort->port, poolId, enable);
-+    if (err != 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fman_port_set_bpool_cnt_mode"));
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_GetBmiCounters(t_Handle h_FmPort, t_FmPortBmiStats *p_BmiStats)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_RX)
-+            || (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G)){
-+        p_BmiStats->cntCycle =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_CYCLE);
-+            /* fmbm_rccn */
-+        p_BmiStats->cntTaskUtil =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_TASK_UTIL);
-+            /* fmbm_rtuc */
-+        p_BmiStats->cntQueueUtil =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_QUEUE_UTIL);
-+            /* fmbm_rrquc */
-+        p_BmiStats->cntDmaUtil =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_DMA_UTIL);
-+            /* fmbm_rduc */
-+        p_BmiStats->cntFifoUtil =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_FIFO_UTIL);
-+            /* fmbm_rfuc */
-+        p_BmiStats->cntRxPauseActivation =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_RX_PAUSE_ACTIVATION);
-+            /* fmbm_rpac */
-+        p_BmiStats->cntFrame =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_FRAME);
-+            /* fmbm_rfrc */
-+        p_BmiStats->cntDiscardFrame =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_DISCARD_FRAME);
-+            /* fmbm_rfdc */
-+        p_BmiStats->cntDeallocBuf =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_DEALLOC_BUF);
-+            /* fmbm_rbdc */
-+        p_BmiStats->cntRxBadFrame =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_RX_BAD_FRAME);
-+            /* fmbm_rfbc */
-+        p_BmiStats->cntRxLargeFrame =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_RX_LARGE_FRAME);
-+            /* fmbm_rlfc */
-+        p_BmiStats->cntRxFilterFrame =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_RX_FILTER_FRAME);
-+            /* fmbm_rffc */
-+        p_BmiStats->cntRxListDmaErr =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR);
-+            /* fmbm_rfldec */
-+        p_BmiStats->cntRxOutOfBuffersDiscard =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD);
-+            /* fmbm_rodc */
-+        p_BmiStats->cntWredDiscard = 0;
-+        p_BmiStats->cntLengthErr = 0;
-+        p_BmiStats->cntUnsupportedFormat = 0;
-+    }
-+    else if ((p_FmPort->portType == e_FM_PORT_TYPE_TX)
-+                || (p_FmPort->portType == e_FM_PORT_TYPE_TX_10G)){
-+        p_BmiStats->cntCycle =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_CYCLE);
-+            /* fmbm_tccn */
-+        p_BmiStats->cntTaskUtil =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_TASK_UTIL);
-+            /* fmbm_ttuc */
-+        p_BmiStats->cntQueueUtil =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_QUEUE_UTIL);
-+            /* fmbm_ttcquc */
-+        p_BmiStats->cntDmaUtil =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_DMA_UTIL);
-+            /* fmbm_tduc */
-+        p_BmiStats->cntFifoUtil =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_FIFO_UTIL);
-+            /* fmbm_tfuc */
-+        p_BmiStats->cntRxPauseActivation = 0;
-+        p_BmiStats->cntFrame =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_FRAME);
-+            /* fmbm_tfrc */
-+        p_BmiStats->cntDiscardFrame =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_DISCARD_FRAME);
-+            /* fmbm_tfdc */
-+        p_BmiStats->cntDeallocBuf =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_DEALLOC_BUF);
-+            /* fmbm_tbdc */
-+        p_BmiStats->cntRxBadFrame = 0;
-+        p_BmiStats->cntRxLargeFrame = 0;
-+        p_BmiStats->cntRxFilterFrame = 0;
-+        p_BmiStats->cntRxListDmaErr = 0;
-+        p_BmiStats->cntRxOutOfBuffersDiscard = 0;
-+        p_BmiStats->cntWredDiscard = 0;
-+        p_BmiStats->cntLengthErr =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_LENGTH_ERR);
-+            /* fmbm_tfledc */
-+        p_BmiStats->cntUnsupportedFormat =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT);
-+            /* fmbm_tfufdc */
-+    }
-+    else if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING) {
-+        p_BmiStats->cntCycle =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_CYCLE);
-+            /* fmbm_occn */
-+        p_BmiStats->cntTaskUtil =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_TASK_UTIL);
-+            /* fmbm_otuc */
-+        p_BmiStats->cntQueueUtil = 0;
-+        p_BmiStats->cntDmaUtil =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_DMA_UTIL);
-+            /* fmbm_oduc */
-+        p_BmiStats->cntFifoUtil =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_FIFO_UTIL);
-+            /* fmbm_ofuc*/
-+        p_BmiStats->cntRxPauseActivation = 0;
-+        p_BmiStats->cntFrame =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_FRAME);
-+            /* fmbm_ofrc */
-+        p_BmiStats->cntDiscardFrame =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_DISCARD_FRAME);
-+            /* fmbm_ofdc */
-+        p_BmiStats->cntDeallocBuf =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_DEALLOC_BUF);
-+            /* fmbm_obdc*/
-+        p_BmiStats->cntRxBadFrame = 0;
-+        p_BmiStats->cntRxLargeFrame = 0;
-+        p_BmiStats->cntRxFilterFrame =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_RX_FILTER_FRAME);
-+            /* fmbm_offc */
-+        p_BmiStats->cntRxListDmaErr =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR);
-+            /* fmbm_ofldec */
-+        p_BmiStats->cntRxOutOfBuffersDiscard =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD);
-+            /* fmbm_rodc */
-+        p_BmiStats->cntWredDiscard =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_WRED_DISCARD);
-+            /* fmbm_ofwdc */
-+        p_BmiStats->cntLengthErr =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_LENGTH_ERR);
-+            /* fmbm_ofledc */
-+        p_BmiStats->cntUnsupportedFormat =
-+            FM_PORT_GetCounter(h_FmPort, e_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT);
-+            /* fmbm_ofufdc */
-+    }
-+    return E_OK;
-+}
-+
-+uint32_t FM_PORT_GetCounter(t_Handle h_FmPort, e_FmPortCounters counter)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    bool bmiCounter = FALSE;
-+    enum fman_port_stats_counters statsType;
-+    enum fman_port_perf_counters perfType;
-+    enum fman_port_qmi_counters queueType;
-+    bool isStats;
-+    t_Error errCode;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmPort, E_INVALID_HANDLE, 0);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    switch (counter)
-+    {
-+        case (e_FM_PORT_COUNTERS_DEQ_TOTAL):
-+        case (e_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT):
-+        case (e_FM_PORT_COUNTERS_DEQ_CONFIRM):
-+            /* check that counter is available for the port type */
-+            if ((p_FmPort->portType == e_FM_PORT_TYPE_RX)
-+                    || (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G))
-+            {
-+                REPORT_ERROR(MINOR, E_INVALID_STATE,
-+                        ("Requested counter is not available for Rx ports"));
-+                return 0;
-+            }
-+            bmiCounter = FALSE;
-+            break;
-+        case (e_FM_PORT_COUNTERS_ENQ_TOTAL):
-+            bmiCounter = FALSE;
-+            break;
-+        default: /* BMI counters (or error - will be checked in BMI routine )*/
-+            bmiCounter = TRUE;
-+            break;
-+    }
-+
-+    if (bmiCounter)
-+    {
-+        errCode = BmiPortCheckAndGetCounterType(p_FmPort, counter, &statsType,
-+                                                &perfType, &isStats);
-+        if (errCode != E_OK)
-+        {
-+            REPORT_ERROR(MINOR, errCode, NO_MSG);
-+            return 0;
-+        }
-+        if (isStats)
-+            return fman_port_get_stats_counter(&p_FmPort->port, statsType);
-+        else
-+            return fman_port_get_perf_counter(&p_FmPort->port, perfType);
-+    }
-+    else /* QMI counter */
-+    {
-+        /* check that counters are enabled */
-+        if (!(GET_UINT32(p_FmPort->port.qmi_regs->fmqm_pnc)
-+                & QMI_PORT_CFG_EN_COUNTERS))
-+
-+        {
-+            REPORT_ERROR(MINOR, E_INVALID_STATE, ("Requested counter was not enabled"));
-+            return 0;
-+        }
-+
-+        /* Set counter */
-+        switch (counter)
-+        {
-+            case (e_FM_PORT_COUNTERS_ENQ_TOTAL):
-+                queueType = E_FMAN_PORT_ENQ_TOTAL;
-+                break;
-+            case (e_FM_PORT_COUNTERS_DEQ_TOTAL):
-+                queueType = E_FMAN_PORT_DEQ_TOTAL;
-+                break;
-+            case (e_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT):
-+                queueType = E_FMAN_PORT_DEQ_FROM_DFLT;
-+                break;
-+            case (e_FM_PORT_COUNTERS_DEQ_CONFIRM):
-+                queueType = E_FMAN_PORT_DEQ_CONFIRM;
-+                break;
-+            default:
-+                REPORT_ERROR(MINOR, E_INVALID_STATE, ("Requested counter is not available"));
-+                return 0;
-+        }
-+
-+        return fman_port_get_qmi_counter(&p_FmPort->port, queueType);
-+    }
-+
-+    return 0;
-+}
-+
-+t_Error FM_PORT_ModifyCounter(t_Handle h_FmPort, e_FmPortCounters counter,
-+                              uint32_t value)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    bool bmiCounter = FALSE;
-+    enum fman_port_stats_counters statsType;
-+    enum fman_port_perf_counters perfType;
-+    enum fman_port_qmi_counters queueType;
-+    bool isStats;
-+    t_Error errCode;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    switch (counter)
-+    {
-+        case (e_FM_PORT_COUNTERS_DEQ_TOTAL):
-+        case (e_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT):
-+        case (e_FM_PORT_COUNTERS_DEQ_CONFIRM):
-+            /* check that counter is available for the port type */
-+            if ((p_FmPort->portType == e_FM_PORT_TYPE_RX)
-+                    || (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G))
-+                RETURN_ERROR(
-+                        MINOR, E_INVALID_STATE,
-+                        ("Requested counter is not available for Rx ports"));
-+        case (e_FM_PORT_COUNTERS_ENQ_TOTAL):
-+            bmiCounter = FALSE;
-+            break;
-+        default: /* BMI counters (or error - will be checked in BMI routine )*/
-+            bmiCounter = TRUE;
-+            break;
-+    }
-+
-+    if (bmiCounter)
-+    {
-+        errCode = BmiPortCheckAndGetCounterType(p_FmPort, counter, &statsType,
-+                                                &perfType, &isStats);
-+        if (errCode != E_OK)
-+        {
-+            RETURN_ERROR(MINOR, errCode, NO_MSG);
-+        }
-+        if (isStats)
-+            fman_port_set_stats_counter(&p_FmPort->port, statsType, value);
-+        else
-+            fman_port_set_perf_counter(&p_FmPort->port, perfType, value);
-+    }
-+    else /* QMI counter */
-+    {
-+        /* check that counters are enabled */
-+        if (!(GET_UINT32(p_FmPort->port.qmi_regs->fmqm_pnc)
-+                & QMI_PORT_CFG_EN_COUNTERS))
-+        {
-+            RETURN_ERROR(MINOR, E_INVALID_STATE,
-+                         ("Requested counter was not enabled"));
-+        }
-+
-+        /* Set counter */
-+        switch (counter)
-+        {
-+            case (e_FM_PORT_COUNTERS_ENQ_TOTAL):
-+                queueType = E_FMAN_PORT_ENQ_TOTAL;
-+                break;
-+            case (e_FM_PORT_COUNTERS_DEQ_TOTAL):
-+                queueType = E_FMAN_PORT_DEQ_TOTAL;
-+                break;
-+            case (e_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT):
-+                queueType = E_FMAN_PORT_DEQ_FROM_DFLT;
-+                break;
-+            case (e_FM_PORT_COUNTERS_DEQ_CONFIRM):
-+                queueType = E_FMAN_PORT_DEQ_CONFIRM;
-+                break;
-+            default:
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                             ("Requested counter is not available"));
-+        }
-+
-+        fman_port_set_qmi_counter(&p_FmPort->port, queueType, value);
-+    }
-+
-+    return E_OK;
-+}
-+
-+uint32_t FM_PORT_GetAllocBufCounter(t_Handle h_FmPort, uint8_t poolId)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmPort, E_INVALID_HANDLE, 0);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX)
-+            && (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G))
-+    {
-+        REPORT_ERROR(MINOR, E_INVALID_STATE, ("Requested counter is not available for non-Rx ports"));
-+        return 0;
-+    }
-+    return fman_port_get_bpool_counter(&p_FmPort->port, poolId);
-+}
-+
-+t_Error FM_PORT_ModifyAllocBufCounter(t_Handle h_FmPort, uint8_t poolId,
-+                                      uint32_t value)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort *)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX)
-+            && (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G))
-+        RETURN_ERROR( MINOR, E_INVALID_STATE,
-+                     ("Requested counter is not available for non-Rx ports"));
-+
-+    fman_port_set_bpool_counter(&p_FmPort->port, poolId, value);
-+    return E_OK;
-+}
-+bool FM_PORT_IsStalled(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_Error err;
-+    bool isStalled;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmPort, E_INVALID_HANDLE, FALSE);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE,
-+                              FALSE);
-+
-+    err = FmIsPortStalled(p_FmPort->h_Fm, p_FmPort->hardwarePortId, &isStalled);
-+    if (err != E_OK)
-+    {
-+        REPORT_ERROR(MAJOR, err, NO_MSG);
-+        return TRUE;
-+    }
-+    return isStalled;
-+}
-+
-+t_Error FM_PORT_ReleaseStalled(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    return FmResumeStalledPort(p_FmPort->h_Fm, p_FmPort->hardwarePortId);
-+}
-+
-+t_Error FM_PORT_SetRxL4ChecksumVerify(t_Handle h_FmPort, bool l4Checksum)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    int err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for Rx ports only"));
-+
-+    if (l4Checksum)
-+        err = fman_port_modify_rx_fd_bits(
-+                &p_FmPort->port, (uint8_t)(BMI_PORT_RFNE_FRWD_DCL4C >> 24),
-+                TRUE);
-+    else
-+        err = fman_port_modify_rx_fd_bits(
-+                &p_FmPort->port, (uint8_t)(BMI_PORT_RFNE_FRWD_DCL4C >> 24),
-+                FALSE);
-+    if (err != 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fman_port_modify_rx_fd_bits"));
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+/*       API Run-time PCD Control unit functions                             */
-+/*****************************************************************************/
-+
-+#if (DPAA_VERSION >= 11)
-+t_Error FM_PORT_VSPAlloc(t_Handle h_FmPort, t_FmPortVSPAllocParams *p_VSPParams)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_Error err = E_OK;
-+    volatile uint32_t *p_BmiStorageProfileId = NULL, *p_BmiVspe = NULL;
-+    uint32_t tmpReg = 0, tmp = 0;
-+    uint16_t hwStoragePrflId;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->h_Fm, E_INVALID_HANDLE);
-+    /*for numOfProfiles = 0 don't call this function*/
-+    SANITY_CHECK_RETURN_ERROR(p_VSPParams->numOfProfiles, E_INVALID_VALUE);
-+    /*dfltRelativeId should be in the range of numOfProfiles*/
-+    SANITY_CHECK_RETURN_ERROR(
-+            p_VSPParams->dfltRelativeId < p_VSPParams->numOfProfiles,
-+            E_INVALID_VALUE);
-+    /*p_FmPort should be from Rx type or OP*/
-+    SANITY_CHECK_RETURN_ERROR(
-+            ((p_FmPort->portType == e_FM_PORT_TYPE_RX_10G) || (p_FmPort->portType == e_FM_PORT_TYPE_RX) || (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)),
-+            E_INVALID_VALUE);
-+    /*port should be disabled*/
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->enabled, E_INVALID_STATE);
-+    /*if its called for Rx port relevant Tx Port should be passed (initialized) too and it should be disabled*/
-+    SANITY_CHECK_RETURN_ERROR(
-+            ((p_VSPParams->h_FmTxPort && !((t_FmPort *)(p_VSPParams->h_FmTxPort))->enabled) || (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)),
-+            E_INVALID_VALUE);
-+    /*should be called before SetPCD - this port should be without PCD*/
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->pcdEngines, E_INVALID_STATE);
-+
-+    /*alloc window of VSPs for this port*/
-+    err = FmVSPAllocForPort(p_FmPort->h_Fm, p_FmPort->portType,
-+                            p_FmPort->portId, p_VSPParams->numOfProfiles);
-+    if (err != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    /*get absolute VSP ID for dfltRelative*/
-+    err = FmVSPGetAbsoluteProfileId(p_FmPort->h_Fm, p_FmPort->portType,
-+                                    p_FmPort->portId,
-+                                    p_VSPParams->dfltRelativeId,
-+                                    &hwStoragePrflId);
-+    if (err != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    /*fill relevant registers for p_FmPort and relative TxPort in the case p_FmPort from Rx type*/
-+    switch (p_FmPort->portType)
-+    {
-+        case (e_FM_PORT_TYPE_RX_10G):
-+        case (e_FM_PORT_TYPE_RX):
-+            p_BmiStorageProfileId =
-+                    &(((t_FmPort *)(p_VSPParams->h_FmTxPort))->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tcfqid);
-+            p_BmiVspe =
-+                    &(((t_FmPort *)(p_VSPParams->h_FmTxPort))->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tfne);
-+
-+            tmpReg = GET_UINT32(*p_BmiStorageProfileId) & ~BMI_SP_ID_MASK;
-+            tmpReg |= (uint32_t)hwStoragePrflId << BMI_SP_ID_SHIFT;
-+            WRITE_UINT32(*p_BmiStorageProfileId, tmpReg);
-+
-+            tmpReg = GET_UINT32(*p_BmiVspe);
-+            WRITE_UINT32(*p_BmiVspe, tmpReg | BMI_SP_EN);
-+
-+            p_BmiStorageProfileId =
-+                    &p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfqid;
-+            p_BmiVspe = &p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rpp;
-+            hwStoragePrflId = p_VSPParams->dfltRelativeId;
-+            break;
-+
-+        case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+            tmpReg = NIA_ENG_BMI | NIA_BMI_AC_FETCH_ALL_FRAME;
-+            WRITE_UINT32( p_FmPort->p_FmPortQmiRegs->nonRxQmiRegs.fmqm_pndn,
-+                         tmpReg);
-+
-+            p_BmiStorageProfileId =
-+                    &p_FmPort->p_FmPortBmiRegs->ohPortBmiRegs.fmbm_ofqid;
-+            p_BmiVspe = &p_FmPort->p_FmPortBmiRegs->ohPortBmiRegs.fmbm_opp;
-+            tmp |= BMI_EBD_EN;
-+            break;
-+
-+        default:
-+            RETURN_ERROR( MAJOR, E_INVALID_OPERATION,
-+                         ("available for Rx and offline parsing ports only"));
-+    }
-+
-+    p_FmPort->vspe = TRUE;
-+    p_FmPort->dfltRelativeId = p_VSPParams->dfltRelativeId;
-+
-+    tmpReg = GET_UINT32(*p_BmiStorageProfileId) & ~BMI_SP_ID_MASK;
-+    tmpReg |= (uint32_t)hwStoragePrflId << BMI_SP_ID_SHIFT;
-+    WRITE_UINT32(*p_BmiStorageProfileId, tmpReg);
-+
-+    tmpReg = GET_UINT32(*p_BmiVspe);
-+    WRITE_UINT32(*p_BmiVspe, tmpReg | BMI_SP_EN | tmp);
-+    return E_OK;
-+}
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+t_Error FM_PORT_PcdPlcrAllocProfiles(t_Handle h_FmPort, uint16_t numOfProfiles)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_Error err = E_OK;
-+
-+    p_FmPort->h_FmPcd = FmGetPcdHandle(p_FmPort->h_Fm);
-+    ASSERT_COND(p_FmPort->h_FmPcd);
-+
-+    if (!TRY_LOCK(p_FmPort->h_Spinlock, &p_FmPort->lock))
-+    {
-+        DBG(TRACE, ("FM Port Try Lock - BUSY"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    if (numOfProfiles)
-+    {
-+        err = FmPcdPlcrAllocProfiles(p_FmPort->h_FmPcd,
-+                                     p_FmPort->hardwarePortId, numOfProfiles);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+    /* set the port handle within the PCD policer, even if no profiles defined */
-+    FmPcdPortRegister(p_FmPort->h_FmPcd, h_FmPort, p_FmPort->hardwarePortId);
-+
-+    RELEASE_LOCK(p_FmPort->lock);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_PcdPlcrFreeProfiles(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_Error err = E_OK;
-+
-+    if (!TRY_LOCK(p_FmPort->h_Spinlock, &p_FmPort->lock))
-+    {
-+        DBG(TRACE, ("FM Port Try Lock - BUSY"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = FmPcdPlcrFreeProfiles(p_FmPort->h_FmPcd, p_FmPort->hardwarePortId);
-+
-+    RELEASE_LOCK(p_FmPort->lock);
-+
-+    if (err)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_PcdKgModifyInitialScheme(t_Handle h_FmPort,
-+                                         t_FmPcdKgSchemeSelect *p_FmPcdKgScheme)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    volatile uint32_t *p_BmiHpnia = NULL;
-+    uint32_t tmpReg;
-+    uint8_t relativeSchemeId;
-+    uint8_t physicalSchemeId;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->pcdEngines & FM_PCD_KG,
-+                              E_INVALID_STATE);
-+
-+    tmpReg = (uint32_t)((p_FmPort->pcdEngines & FM_PCD_CC) ? NIA_KG_CC_EN : 0);
-+    switch (p_FmPort->portType)
-+    {
-+        case (e_FM_PORT_TYPE_RX_10G):
-+        case (e_FM_PORT_TYPE_RX):
-+            p_BmiHpnia = &p_FmPort->port.bmi_regs->rx.fmbm_rfpne;
-+            break;
-+        case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+            p_BmiHpnia = &p_FmPort->port.bmi_regs->oh.fmbm_ofpne;
-+            break;
-+        default:
-+            RETURN_ERROR( MAJOR, E_INVALID_OPERATION,
-+                         ("available for Rx and offline parsing ports only"));
-+    }
-+
-+    if (!TRY_LOCK(p_FmPort->h_Spinlock, &p_FmPort->lock))
-+    {
-+        DBG(TRACE, ("FM Port Try Lock - BUSY"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    /* if we want to change to direct scheme, we need to check that this scheme is valid */
-+    if (p_FmPcdKgScheme->direct)
-+    {
-+        physicalSchemeId = FmPcdKgGetSchemeId(p_FmPcdKgScheme->h_DirectScheme);
-+        /* check that this scheme is bound to this port */
-+        if (!(p_FmPort->schemesPerPortVector
-+                & (uint32_t)(1 << (31 - (uint32_t)physicalSchemeId))))
-+        {
-+            RELEASE_LOCK(p_FmPort->lock);
-+            RETURN_ERROR(
-+                    MAJOR, E_INVALID_STATE,
-+                    ("called with a scheme that is not bound to this port"));
-+        }
-+
-+        relativeSchemeId = FmPcdKgGetRelativeSchemeId(p_FmPort->h_FmPcd,
-+                                                      physicalSchemeId);
-+        if (relativeSchemeId >= FM_PCD_KG_NUM_OF_SCHEMES)
-+        {
-+            RELEASE_LOCK(p_FmPort->lock);
-+            RETURN_ERROR(MAJOR, E_NOT_IN_RANGE,
-+                         ("called with invalid Scheme "));
-+        }
-+
-+        if (!FmPcdKgIsSchemeValidSw(p_FmPcdKgScheme->h_DirectScheme))
-+        {
-+            RELEASE_LOCK(p_FmPort->lock);
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                         ("called with uninitialized Scheme "));
-+        }
-+
-+        WRITE_UINT32(
-+                *p_BmiHpnia,
-+                NIA_ENG_KG | tmpReg | NIA_KG_DIRECT | (uint32_t)physicalSchemeId);
-+    }
-+    else
-+        /* change to indirect scheme */
-+        WRITE_UINT32(*p_BmiHpnia, NIA_ENG_KG | tmpReg);
-+    RELEASE_LOCK(p_FmPort->lock);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_PcdPlcrModifyInitialProfile(t_Handle h_FmPort,
-+                                            t_Handle h_Profile)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    volatile uint32_t *p_BmiNia;
-+    volatile uint32_t *p_BmiHpnia;
-+    uint32_t tmpReg;
-+    uint16_t absoluteProfileId = FmPcdPlcrProfileGetAbsoluteId(h_Profile);
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->pcdEngines & FM_PCD_PLCR,
-+                              E_INVALID_STATE);
-+
-+    /* check relevance of this routine  - only when policer is used
-+     directly after BMI or Parser */
-+    if ((p_FmPort->pcdEngines & FM_PCD_KG)
-+            || (p_FmPort->pcdEngines & FM_PCD_CC))
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_STATE,
-+                ("relevant only when PCD support mode is e_FM_PCD_SUPPORT_PLCR_ONLY or e_FM_PCD_SUPPORT_PRS_AND_PLCR"));
-+
-+    switch (p_FmPort->portType)
-+    {
-+        case (e_FM_PORT_TYPE_RX_10G):
-+        case (e_FM_PORT_TYPE_RX):
-+            p_BmiNia = &p_FmPort->port.bmi_regs->rx.fmbm_rfne;
-+            p_BmiHpnia = &p_FmPort->port.bmi_regs->rx.fmbm_rfpne;
-+            tmpReg = GET_UINT32(*p_BmiNia) & BMI_RFNE_FDCS_MASK;
-+            break;
-+        case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+            p_BmiNia = &p_FmPort->port.bmi_regs->oh.fmbm_ofne;
-+            p_BmiHpnia = &p_FmPort->port.bmi_regs->oh.fmbm_ofpne;
-+            tmpReg = 0;
-+            break;
-+        default:
-+            RETURN_ERROR( MAJOR, E_INVALID_OPERATION,
-+                         ("available for Rx and offline parsing ports only"));
-+    }
-+
-+    if (!TRY_LOCK(p_FmPort->h_Spinlock, &p_FmPort->lock))
-+    {
-+        DBG(TRACE, ("FM Port Try Lock - BUSY"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    if (!FmPcdPlcrIsProfileValid(p_FmPort->h_FmPcd, absoluteProfileId))
-+    {
-+        RELEASE_LOCK(p_FmPort->lock);
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION, ("Invalid profile"));
-+    }
-+
-+    tmpReg |= (uint32_t)(NIA_ENG_PLCR | NIA_PLCR_ABSOLUTE | absoluteProfileId);
-+
-+    if (p_FmPort->pcdEngines & FM_PCD_PRS) /* e_FM_PCD_SUPPORT_PRS_AND_PLCR */
-+    {
-+        /* update BMI HPNIA */
-+        WRITE_UINT32(*p_BmiHpnia, tmpReg);
-+    }
-+    else /* e_FM_PCD_SUPPORT_PLCR_ONLY */
-+    {
-+        /* rfne may contain FDCS bits, so first we read them. */
-+        tmpReg |= (GET_UINT32(*p_BmiNia) & BMI_RFNE_FDCS_MASK);
-+        /* update BMI NIA */
-+        WRITE_UINT32(*p_BmiNia, tmpReg);
-+    }RELEASE_LOCK(p_FmPort->lock);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_PcdCcModifyTree(t_Handle h_FmPort, t_Handle h_CcTree)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_Error err = E_OK;
-+    volatile uint32_t *p_BmiCcBase = NULL;
-+    volatile uint32_t *p_BmiNia = NULL;
-+    uint32_t ccTreePhysOffset;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(h_CcTree, E_INVALID_HANDLE);
-+
-+    if (p_FmPort->imEn)
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for non-independent mode ports only"));
-+
-+    /* get PCD registers pointers */
-+    switch (p_FmPort->portType)
-+    {
-+        case (e_FM_PORT_TYPE_RX_10G):
-+        case (e_FM_PORT_TYPE_RX):
-+            p_BmiNia = &p_FmPort->port.bmi_regs->rx.fmbm_rfne;
-+            break;
-+        case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+            p_BmiNia = &p_FmPort->port.bmi_regs->oh.fmbm_ofne;
-+            break;
-+        default:
-+            RETURN_ERROR( MAJOR, E_INVALID_OPERATION,
-+                         ("available for Rx and offline parsing ports only"));
-+    }
-+
-+    /* check that current NIA is BMI to BMI */
-+    if ((GET_UINT32(*p_BmiNia) & ~BMI_RFNE_FDCS_MASK)
-+            != GET_NIA_BMI_AC_ENQ_FRAME(p_FmPort->h_FmPcd))
-+        RETURN_ERROR( MAJOR, E_INVALID_OPERATION,
-+                     ("may be called only for ports in BMI-to-BMI state."));
-+
-+    if (p_FmPort->pcdEngines & FM_PCD_CC)
-+    {
-+        if (p_FmPort->h_IpReassemblyManip)
-+        {
-+            err = FmPcdCcTreeAddIPR(p_FmPort->h_FmPcd, h_CcTree, NULL,
-+                                    p_FmPort->h_IpReassemblyManip, FALSE);
-+            if (err != E_OK)
-+            {
-+                RETURN_ERROR(MAJOR, err, NO_MSG);
-+            }
-+        }
-+        else
-+            if (p_FmPort->h_CapwapReassemblyManip)
-+            {
-+                err = FmPcdCcTreeAddCPR(p_FmPort->h_FmPcd, h_CcTree, NULL,
-+                                        p_FmPort->h_CapwapReassemblyManip,
-+                                        FALSE);
-+                if (err != E_OK)
-+                {
-+                    RETURN_ERROR(MAJOR, err, NO_MSG);
-+                }
-+            }
-+        switch (p_FmPort->portType)
-+        {
-+            case (e_FM_PORT_TYPE_RX_10G):
-+            case (e_FM_PORT_TYPE_RX):
-+                p_BmiCcBase = &p_FmPort->port.bmi_regs->rx.fmbm_rccb;
-+                break;
-+            case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+                p_BmiCcBase = &p_FmPort->port.bmi_regs->oh.fmbm_occb;
-+                break;
-+            default:
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Invalid port type"));
-+        }
-+
-+        if (!TRY_LOCK(p_FmPort->h_Spinlock, &p_FmPort->lock))
-+        {
-+            DBG(TRACE, ("FM Port Try Lock - BUSY"));
-+            return ERROR_CODE(E_BUSY);
-+        }
-+        err = FmPcdCcBindTree(p_FmPort->h_FmPcd, NULL, h_CcTree,
-+                              &ccTreePhysOffset, h_FmPort);
-+        if (err)
-+        {
-+            RELEASE_LOCK(p_FmPort->lock);
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        }WRITE_UINT32(*p_BmiCcBase, ccTreePhysOffset);
-+
-+        p_FmPort->ccTreeId = h_CcTree;
-+        RELEASE_LOCK(p_FmPort->lock);
-+    }
-+    else
-+        RETURN_ERROR( MAJOR, E_INVALID_STATE,
-+                     ("Coarse Classification not defined for this port."));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_AttachPCD(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    if (p_FmPort->imEn)
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for non-independent mode ports only"));
-+
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING))
-+        RETURN_ERROR( MAJOR, E_INVALID_OPERATION,
-+                     ("available for Rx and offline parsing ports only"));
-+
-+    if (!TRY_LOCK(p_FmPort->h_Spinlock, &p_FmPort->lock))
-+    {
-+        DBG(TRACE, ("FM Port Try Lock - BUSY"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    if (p_FmPort->h_ReassemblyTree)
-+        p_FmPort->pcdEngines |= FM_PCD_CC;
-+
-+    err = AttachPCD(h_FmPort);
-+    RELEASE_LOCK(p_FmPort->lock);
-+
-+    return err;
-+}
-+
-+t_Error FM_PORT_DetachPCD(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    if (p_FmPort->imEn)
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for non-independent mode ports only"));
-+
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING))
-+        RETURN_ERROR( MAJOR, E_INVALID_OPERATION,
-+                     ("available for Rx and offline parsing ports only"));
-+
-+    if (!TRY_LOCK(p_FmPort->h_Spinlock, &p_FmPort->lock))
-+    {
-+        DBG(TRACE, ("FM Port Try Lock - BUSY"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = DetachPCD(h_FmPort);
-+    if (err != E_OK)
-+    {
-+        RELEASE_LOCK(p_FmPort->lock);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    if (p_FmPort->h_ReassemblyTree)
-+        p_FmPort->pcdEngines &= ~FM_PCD_CC;
-+    RELEASE_LOCK(p_FmPort->lock);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_SetPCD(t_Handle h_FmPort, t_FmPortPcdParams *p_PcdParam)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_Error err = E_OK;
-+    t_FmPortPcdParams modifiedPcdParams, *p_PcdParams;
-+    t_FmPcdCcTreeParams *p_FmPcdCcTreeParams;
-+    t_FmPortPcdCcParams fmPortPcdCcParams;
-+    t_FmPortGetSetCcParams fmPortGetSetCcParams;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_PcdParam, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    if (p_FmPort->imEn)
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for non-independent mode ports only"));
-+
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING))
-+        RETURN_ERROR( MAJOR, E_INVALID_OPERATION,
-+                     ("available for Rx and offline parsing ports only"));
-+
-+    if (!TRY_LOCK(p_FmPort->h_Spinlock, &p_FmPort->lock))
-+    {
-+        DBG(TRACE, ("FM Port Try Lock - BUSY"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    p_FmPort->h_FmPcd = FmGetPcdHandle(p_FmPort->h_Fm);
-+    ASSERT_COND(p_FmPort->h_FmPcd);
-+
-+    if (p_PcdParam->p_CcParams && !p_PcdParam->p_CcParams->h_CcTree)
-+        RETURN_ERROR(MAJOR, E_INVALID_HANDLE,
-+                     ("Tree handle must be given if CC is required"));
-+
-+    memcpy(&modifiedPcdParams, p_PcdParam, sizeof(t_FmPortPcdParams));
-+    p_PcdParams = &modifiedPcdParams;
-+    if ((p_PcdParams->h_IpReassemblyManip)
-+#if (DPAA_VERSION >= 11)
-+            || (p_PcdParams->h_CapwapReassemblyManip)
-+#endif /* (DPAA_VERSION >= 11) */
-+            )
-+    {
-+        if ((p_PcdParams->pcdSupport != e_FM_PORT_PCD_SUPPORT_PRS_AND_KG)
-+                && (p_PcdParams->pcdSupport
-+                        != e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC)
-+                && (p_PcdParams->pcdSupport
-+                        != e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR)
-+                && (p_PcdParams->pcdSupport
-+                        != e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR))
-+        {
-+            RELEASE_LOCK(p_FmPort->lock);
-+            RETURN_ERROR( MAJOR, E_INVALID_STATE,
-+                         ("pcdSupport must have KG for supporting Reassembly"));
-+        }
-+        p_FmPort->h_IpReassemblyManip = p_PcdParams->h_IpReassemblyManip;
-+#if (DPAA_VERSION >= 11)
-+        if ((p_PcdParams->h_IpReassemblyManip)
-+                && (p_PcdParams->h_CapwapReassemblyManip))
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                         ("Either IP-R or CAPWAP-R is allowed"));
-+        if ((p_PcdParams->h_CapwapReassemblyManip)
-+                && (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING))
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                         ("CAPWAP-R is allowed only on offline-port"));
-+        if (p_PcdParams->h_CapwapReassemblyManip)
-+            p_FmPort->h_CapwapReassemblyManip =
-+                    p_PcdParams->h_CapwapReassemblyManip;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+        if (!p_PcdParams->p_CcParams)
-+        {
-+            if (!((p_PcdParams->pcdSupport == e_FM_PORT_PCD_SUPPORT_PRS_AND_KG)
-+                    || (p_PcdParams->pcdSupport
-+                            == e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR)))
-+            {
-+                RELEASE_LOCK(p_FmPort->lock);
-+                RETURN_ERROR(
-+                        MAJOR,
-+                        E_INVALID_STATE,
-+                        ("PCD initialization structure is not consistent with pcdSupport"));
-+            }
-+
-+            /* No user-tree, need to build internal tree */
-+            p_FmPcdCcTreeParams = (t_FmPcdCcTreeParams*)XX_Malloc(
-+                    sizeof(t_FmPcdCcTreeParams));
-+            if (!p_FmPcdCcTreeParams)
-+                RETURN_ERROR(MAJOR, E_NO_MEMORY, ("p_FmPcdCcTreeParams"));
-+            memset(p_FmPcdCcTreeParams, 0, sizeof(t_FmPcdCcTreeParams));
-+            p_FmPcdCcTreeParams->h_NetEnv = p_PcdParams->h_NetEnv;
-+            p_FmPort->h_ReassemblyTree = FM_PCD_CcRootBuild(
-+                    p_FmPort->h_FmPcd, p_FmPcdCcTreeParams);
-+
-+            if (!p_FmPort->h_ReassemblyTree)
-+            {
-+                RELEASE_LOCK(p_FmPort->lock);
-+                XX_Free(p_FmPcdCcTreeParams);
-+                RETURN_ERROR( MAJOR, E_INVALID_HANDLE,
-+                             ("FM_PCD_CcBuildTree for Reassembly failed"));
-+            }
-+            if (p_PcdParams->pcdSupport == e_FM_PORT_PCD_SUPPORT_PRS_AND_KG)
-+                p_PcdParams->pcdSupport =
-+                        e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC;
-+            else
-+                p_PcdParams->pcdSupport =
-+                        e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR;
-+
-+            memset(&fmPortPcdCcParams, 0, sizeof(t_FmPortPcdCcParams));
-+            fmPortPcdCcParams.h_CcTree = p_FmPort->h_ReassemblyTree;
-+            p_PcdParams->p_CcParams = &fmPortPcdCcParams;
-+            XX_Free(p_FmPcdCcTreeParams);
-+        }
-+
-+        if (p_FmPort->h_IpReassemblyManip)
-+            err = FmPcdCcTreeAddIPR(p_FmPort->h_FmPcd,
-+                                    p_PcdParams->p_CcParams->h_CcTree,
-+                                    p_PcdParams->h_NetEnv,
-+                                    p_FmPort->h_IpReassemblyManip, TRUE);
-+#if (DPAA_VERSION >= 11)
-+        else
-+            if (p_FmPort->h_CapwapReassemblyManip)
-+                err = FmPcdCcTreeAddCPR(p_FmPort->h_FmPcd,
-+                                        p_PcdParams->p_CcParams->h_CcTree,
-+                                        p_PcdParams->h_NetEnv,
-+                                        p_FmPort->h_CapwapReassemblyManip,
-+                                        TRUE);
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+        if (err != E_OK)
-+        {
-+            if (p_FmPort->h_ReassemblyTree)
-+            {
-+                FM_PCD_CcRootDelete(p_FmPort->h_ReassemblyTree);
-+                p_FmPort->h_ReassemblyTree = NULL;
-+            }RELEASE_LOCK(p_FmPort->lock);
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        }
-+    }
-+
-+    if (!FmPcdLockTryLockAll(p_FmPort->h_FmPcd))
-+    {
-+        if (p_FmPort->h_ReassemblyTree)
-+        {
-+            FM_PCD_CcRootDelete(p_FmPort->h_ReassemblyTree);
-+            p_FmPort->h_ReassemblyTree = NULL;
-+        }RELEASE_LOCK(p_FmPort->lock);
-+        DBG(TRACE, ("Try LockAll - BUSY"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = SetPcd(h_FmPort, p_PcdParams);
-+    if (err)
-+    {
-+        if (p_FmPort->h_ReassemblyTree)
-+        {
-+            FM_PCD_CcRootDelete(p_FmPort->h_ReassemblyTree);
-+            p_FmPort->h_ReassemblyTree = NULL;
-+        }
-+        FmPcdLockUnlockAll(p_FmPort->h_FmPcd);
-+        RELEASE_LOCK(p_FmPort->lock);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    if ((p_FmPort->pcdEngines & FM_PCD_PRS)
-+            && (p_PcdParams->p_PrsParams->includeInPrsStatistics))
-+    {
-+        err = FmPcdPrsIncludePortInStatistics(p_FmPort->h_FmPcd,
-+                                              p_FmPort->hardwarePortId, TRUE);
-+        if (err)
-+        {
-+            DeletePcd(p_FmPort);
-+            if (p_FmPort->h_ReassemblyTree)
-+            {
-+                FM_PCD_CcRootDelete(p_FmPort->h_ReassemblyTree);
-+                p_FmPort->h_ReassemblyTree = NULL;
-+            }
-+            FmPcdLockUnlockAll(p_FmPort->h_FmPcd);
-+            RELEASE_LOCK(p_FmPort->lock);
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        }
-+        p_FmPort->includeInPrsStatistics = TRUE;
-+    }
-+
-+    FmPcdIncNetEnvOwners(p_FmPort->h_FmPcd, p_FmPort->netEnvId);
-+
-+    if (FmPcdIsAdvancedOffloadSupported(p_FmPort->h_FmPcd))
-+    {
-+        memset(&fmPortGetSetCcParams, 0, sizeof(t_FmPortGetSetCcParams));
-+
-+        if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+        {
-+#ifdef FM_KG_ERASE_FLOW_ID_ERRATA_FMAN_SW004
-+            if ((p_FmPort->fmRevInfo.majorRev < 6) &&
-+                    (p_FmPort->pcdEngines & FM_PCD_KG))
-+            {
-+                int i;
-+                for (i = 0; i<p_PcdParams->p_KgParams->numOfSchemes; i++)
-+                /* The following function must be locked */
-+                FmPcdKgCcGetSetParams(p_FmPort->h_FmPcd,
-+                        p_PcdParams->p_KgParams->h_Schemes[i],
-+                        UPDATE_KG_NIA_CC_WA,
-+                        0);
-+            }
-+#endif /* FM_KG_ERASE_FLOW_ID_ERRATA_FMAN_SW004 */
-+
-+#if (DPAA_VERSION >= 11)
-+            {
-+                t_FmPcdCtrlParamsPage *p_ParamsPage;
-+
-+                FmPortSetGprFunc(p_FmPort, e_FM_PORT_GPR_MURAM_PAGE,
-+                                 (void**)&p_ParamsPage);
-+                ASSERT_COND(p_ParamsPage);
-+                WRITE_UINT32(p_ParamsPage->postBmiFetchNia,
-+                             p_FmPort->savedBmiNia);
-+            }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+            /* Set post-bmi-fetch nia */
-+            p_FmPort->savedBmiNia &= BMI_RFNE_FDCS_MASK;
-+            p_FmPort->savedBmiNia |= (NIA_FM_CTL_AC_POST_BMI_FETCH
-+                    | NIA_ENG_FM_CTL);
-+
-+            /* Set pre-bmi-fetch nia */
-+            fmPortGetSetCcParams.setCcParams.type = UPDATE_NIA_PNDN;
-+#if (DPAA_VERSION >= 11)
-+            fmPortGetSetCcParams.setCcParams.nia =
-+                    (NIA_FM_CTL_AC_PRE_BMI_FETCH_FULL_FRAME | NIA_ENG_FM_CTL);
-+#else
-+            fmPortGetSetCcParams.setCcParams.nia = (NIA_FM_CTL_AC_PRE_BMI_FETCH_HEADER | NIA_ENG_FM_CTL);
-+#endif /* (DPAA_VERSION >= 11) */
-+            if ((err = FmPortGetSetCcParams(p_FmPort, &fmPortGetSetCcParams))
-+                    != E_OK)
-+            {
-+                DeletePcd(p_FmPort);
-+                if (p_FmPort->h_ReassemblyTree)
-+                {
-+                    FM_PCD_CcRootDelete(p_FmPort->h_ReassemblyTree);
-+                    p_FmPort->h_ReassemblyTree = NULL;
-+                }
-+                FmPcdLockUnlockAll(p_FmPort->h_FmPcd);
-+                RELEASE_LOCK(p_FmPort->lock);
-+                RETURN_ERROR(MAJOR, err, NO_MSG);
-+            }
-+        }
-+
-+        FmPcdLockUnlockAll(p_FmPort->h_FmPcd);
-+
-+        /* Set pop-to-next-step nia */
-+#if (DPAA_VERSION == 10)
-+        if (p_FmPort->fmRevInfo.majorRev < 6)
-+        {
-+            fmPortGetSetCcParams.setCcParams.type = UPDATE_NIA_PNEN;
-+            fmPortGetSetCcParams.setCcParams.nia = NIA_FM_CTL_AC_POP_TO_N_STEP | NIA_ENG_FM_CTL;
-+        }
-+        else
-+        {
-+#endif /* (DPAA_VERSION == 10) */
-+        fmPortGetSetCcParams.getCcParams.type = GET_NIA_FPNE;
-+#if (DPAA_VERSION == 10)
-+    }
-+#endif /* (DPAA_VERSION == 10) */
-+        if ((err = FmPortGetSetCcParams(h_FmPort, &fmPortGetSetCcParams))
-+                != E_OK)
-+        {
-+            DeletePcd(p_FmPort);
-+            if (p_FmPort->h_ReassemblyTree)
-+            {
-+                FM_PCD_CcRootDelete(p_FmPort->h_ReassemblyTree);
-+                p_FmPort->h_ReassemblyTree = NULL;
-+            }RELEASE_LOCK(p_FmPort->lock);
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        }
-+
-+        /* Set post-bmi-prepare-to-enq nia */
-+        fmPortGetSetCcParams.setCcParams.type = UPDATE_NIA_FENE;
-+        fmPortGetSetCcParams.setCcParams.nia = (NIA_FM_CTL_AC_POST_BMI_ENQ
-+                | NIA_ENG_FM_CTL);
-+        if ((err = FmPortGetSetCcParams(h_FmPort, &fmPortGetSetCcParams))
-+                != E_OK)
-+        {
-+            DeletePcd(p_FmPort);
-+            if (p_FmPort->h_ReassemblyTree)
-+            {
-+                FM_PCD_CcRootDelete(p_FmPort->h_ReassemblyTree);
-+                p_FmPort->h_ReassemblyTree = NULL;
-+            }RELEASE_LOCK(p_FmPort->lock);
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        }
-+
-+        if ((p_FmPort->h_IpReassemblyManip)
-+                || (p_FmPort->h_CapwapReassemblyManip))
-+        {
-+#if (DPAA_VERSION == 10)
-+            if (p_FmPort->fmRevInfo.majorRev < 6)
-+            {
-+                /* Overwrite post-bmi-prepare-to-enq nia */
-+                fmPortGetSetCcParams.setCcParams.type = UPDATE_NIA_FENE;
-+                fmPortGetSetCcParams.setCcParams.nia = (NIA_FM_CTL_AC_POST_BMI_ENQ_ORR | NIA_ENG_FM_CTL | NIA_ORDER_RESTOR);
-+                fmPortGetSetCcParams.setCcParams.overwrite = TRUE;
-+            }
-+            else
-+            {
-+#endif /* (DPAA_VERSION == 10) */
-+            /* Set the ORR bit (for order-restoration) */
-+            fmPortGetSetCcParams.setCcParams.type = UPDATE_NIA_FPNE;
-+            fmPortGetSetCcParams.setCcParams.nia =
-+                    fmPortGetSetCcParams.getCcParams.nia | NIA_ORDER_RESTOR;
-+#if (DPAA_VERSION == 10)
-+        }
-+#endif /* (DPAA_VERSION == 10) */
-+            if ((err = FmPortGetSetCcParams(h_FmPort, &fmPortGetSetCcParams))
-+                    != E_OK)
-+            {
-+                DeletePcd(p_FmPort);
-+                if (p_FmPort->h_ReassemblyTree)
-+                {
-+                    FM_PCD_CcRootDelete(p_FmPort->h_ReassemblyTree);
-+                    p_FmPort->h_ReassemblyTree = NULL;
-+                }RELEASE_LOCK(p_FmPort->lock);
-+                RETURN_ERROR(MAJOR, err, NO_MSG);
-+            }
-+        }
-+    }
-+    else
-+        FmPcdLockUnlockAll(p_FmPort->h_FmPcd);
-+
-+#if (DPAA_VERSION >= 11)
-+    {
-+        t_FmPcdCtrlParamsPage *p_ParamsPage;
-+
-+        memset(&fmPortGetSetCcParams, 0, sizeof(t_FmPortGetSetCcParams));
-+
-+        fmPortGetSetCcParams.setCcParams.type = UPDATE_NIA_CMNE;
-+        if (FmPcdIsAdvancedOffloadSupported(p_FmPort->h_FmPcd))
-+            fmPortGetSetCcParams.setCcParams.nia = NIA_FM_CTL_AC_POP_TO_N_STEP
-+                    | NIA_ENG_FM_CTL;
-+        else
-+            fmPortGetSetCcParams.setCcParams.nia =
-+                    NIA_FM_CTL_AC_NO_IPACC_POP_TO_N_STEP | NIA_ENG_FM_CTL;
-+        if ((err = FmPortGetSetCcParams(h_FmPort, &fmPortGetSetCcParams))
-+                != E_OK)
-+        {
-+            DeletePcd(p_FmPort);
-+            if (p_FmPort->h_ReassemblyTree)
-+            {
-+                FM_PCD_CcRootDelete(p_FmPort->h_ReassemblyTree);
-+                p_FmPort->h_ReassemblyTree = NULL;
-+            }RELEASE_LOCK(p_FmPort->lock);
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        }
-+
-+        FmPortSetGprFunc(p_FmPort, e_FM_PORT_GPR_MURAM_PAGE,
-+                         (void**)&p_ParamsPage);
-+        ASSERT_COND(p_ParamsPage);
-+
-+        if (FmPcdIsAdvancedOffloadSupported(p_FmPort->h_FmPcd))
-+            WRITE_UINT32(
-+                    p_ParamsPage->misc,
-+                    GET_UINT32(p_ParamsPage->misc) | FM_CTL_PARAMS_PAGE_OFFLOAD_SUPPORT_EN);
-+
-+        if ((p_FmPort->h_IpReassemblyManip)
-+                || (p_FmPort->h_CapwapReassemblyManip))
-+        {
-+            if (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+                WRITE_UINT32(
-+                        p_ParamsPage->discardMask,
-+                        GET_UINT32(p_FmPort->p_FmPortBmiRegs->ohPortBmiRegs.fmbm_ofsdm));
-+            else
-+                WRITE_UINT32(
-+                        p_ParamsPage->discardMask,
-+                        GET_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfsdm));
-+        }
-+#ifdef FM_ERROR_VSP_NO_MATCH_SW006
-+        if (p_FmPort->vspe)
-+            WRITE_UINT32(
-+                    p_ParamsPage->misc,
-+                    GET_UINT32(p_ParamsPage->misc) | (p_FmPort->dfltRelativeId & FM_CTL_PARAMS_PAGE_ERROR_VSP_MASK));
-+#endif /* FM_ERROR_VSP_NO_MATCH_SW006 */
-+    }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    err = AttachPCD(h_FmPort);
-+    if (err)
-+    {
-+        DeletePcd(p_FmPort);
-+        if (p_FmPort->h_ReassemblyTree)
-+        {
-+            FM_PCD_CcRootDelete(p_FmPort->h_ReassemblyTree);
-+            p_FmPort->h_ReassemblyTree = NULL;
-+        }RELEASE_LOCK(p_FmPort->lock);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    RELEASE_LOCK(p_FmPort->lock);
-+
-+    return err;
-+}
-+
-+t_Error FM_PORT_DeletePCD(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+
-+    if (p_FmPort->imEn)
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION,
-+                     ("available for non-independant mode ports only"));
-+
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING))
-+        RETURN_ERROR( MAJOR, E_INVALID_OPERATION,
-+                     ("available for Rx and offline parsing ports only"));
-+
-+    if (!TRY_LOCK(p_FmPort->h_Spinlock, &p_FmPort->lock))
-+    {
-+        DBG(TRACE, ("FM Port Try Lock - BUSY"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = DetachPCD(h_FmPort);
-+    if (err)
-+    {
-+        RELEASE_LOCK(p_FmPort->lock);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    FmPcdDecNetEnvOwners(p_FmPort->h_FmPcd, p_FmPort->netEnvId);
-+
-+    /* we do it anyway, instead of checking if included */
-+    if ((p_FmPort->pcdEngines & FM_PCD_PRS) && p_FmPort->includeInPrsStatistics)
-+    {
-+        FmPcdPrsIncludePortInStatistics(p_FmPort->h_FmPcd,
-+                                        p_FmPort->hardwarePortId, FALSE);
-+        p_FmPort->includeInPrsStatistics = FALSE;
-+    }
-+
-+    if (!FmPcdLockTryLockAll(p_FmPort->h_FmPcd))
-+    {
-+        RELEASE_LOCK(p_FmPort->lock);
-+        DBG(TRACE, ("Try LockAll - BUSY"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = DeletePcd(h_FmPort);
-+    FmPcdLockUnlockAll(p_FmPort->h_FmPcd);
-+    if (err)
-+    {
-+        RELEASE_LOCK(p_FmPort->lock);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    if (p_FmPort->h_ReassemblyTree)
-+    {
-+        err = FM_PCD_CcRootDelete(p_FmPort->h_ReassemblyTree);
-+        if (err)
-+        {
-+            RELEASE_LOCK(p_FmPort->lock);
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        }
-+        p_FmPort->h_ReassemblyTree = NULL;
-+    }RELEASE_LOCK(p_FmPort->lock);
-+
-+    return err;
-+}
-+
-+t_Error FM_PORT_PcdKgBindSchemes(t_Handle h_FmPort,
-+                                 t_FmPcdPortSchemesParams *p_PortScheme)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_FmPcdKgInterModuleBindPortToSchemes schemeBind;
-+    t_Error err = E_OK;
-+    uint32_t tmpScmVec = 0;
-+    int i;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->pcdEngines & FM_PCD_KG,
-+                              E_INVALID_STATE);
-+
-+    schemeBind.netEnvId = p_FmPort->netEnvId;
-+    schemeBind.hardwarePortId = p_FmPort->hardwarePortId;
-+    schemeBind.numOfSchemes = p_PortScheme->numOfSchemes;
-+    schemeBind.useClsPlan = p_FmPort->useClsPlan;
-+    for (i = 0; i < schemeBind.numOfSchemes; i++)
-+    {
-+        schemeBind.schemesIds[i] = FmPcdKgGetSchemeId(
-+                p_PortScheme->h_Schemes[i]);
-+        /* build vector */
-+        tmpScmVec |= 1 << (31 - (uint32_t)schemeBind.schemesIds[i]);
-+    }
-+
-+    if (!TRY_LOCK(p_FmPort->h_Spinlock, &p_FmPort->lock))
-+    {
-+        DBG(TRACE, ("FM Port Try Lock - BUSY"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = FmPcdKgBindPortToSchemes(p_FmPort->h_FmPcd, &schemeBind);
-+    if (err == E_OK)
-+        p_FmPort->schemesPerPortVector |= tmpScmVec;
-+
-+#ifdef FM_KG_ERASE_FLOW_ID_ERRATA_FMAN_SW004
-+    if ((FmPcdIsAdvancedOffloadSupported(p_FmPort->h_FmPcd)) &&
-+            (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING) &&
-+            (p_FmPort->fmRevInfo.majorRev < 6))
-+    {
-+        for (i=0; i<p_PortScheme->numOfSchemes; i++)
-+        FmPcdKgCcGetSetParams(p_FmPort->h_FmPcd, p_PortScheme->h_Schemes[i], UPDATE_KG_NIA_CC_WA, 0);
-+    }
-+#endif /* FM_KG_ERASE_FLOW_ID_ERRATA_FMAN_SW004 */
-+
-+    RELEASE_LOCK(p_FmPort->lock);
-+
-+    return err;
-+}
-+
-+t_Error FM_PORT_PcdKgUnbindSchemes(t_Handle h_FmPort,
-+                                   t_FmPcdPortSchemesParams *p_PortScheme)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_FmPcdKgInterModuleBindPortToSchemes schemeBind;
-+    t_Error err = E_OK;
-+    uint32_t tmpScmVec = 0;
-+    int i;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->pcdEngines & FM_PCD_KG,
-+                              E_INVALID_STATE);
-+
-+    schemeBind.netEnvId = p_FmPort->netEnvId;
-+    schemeBind.hardwarePortId = p_FmPort->hardwarePortId;
-+    schemeBind.numOfSchemes = p_PortScheme->numOfSchemes;
-+    for (i = 0; i < schemeBind.numOfSchemes; i++)
-+    {
-+        schemeBind.schemesIds[i] = FmPcdKgGetSchemeId(
-+                p_PortScheme->h_Schemes[i]);
-+        /* build vector */
-+        tmpScmVec |= 1 << (31 - (uint32_t)schemeBind.schemesIds[i]);
-+    }
-+
-+    if (!TRY_LOCK(p_FmPort->h_Spinlock, &p_FmPort->lock))
-+    {
-+        DBG(TRACE, ("FM Port Try Lock - BUSY"));
-+        return ERROR_CODE(E_BUSY);
-+    }
-+
-+    err = FmPcdKgUnbindPortToSchemes(p_FmPort->h_FmPcd, &schemeBind);
-+    if (err == E_OK)
-+        p_FmPort->schemesPerPortVector &= ~tmpScmVec;
-+    RELEASE_LOCK(p_FmPort->lock);
-+
-+    return err;
-+}
-+
-+t_Error FM_PORT_AddCongestionGrps(t_Handle h_FmPort,
-+                                  t_FmPortCongestionGrps *p_CongestionGrps)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    uint8_t priorityTmpArray[FM_PORT_NUM_OF_CONGESTION_GRPS];
-+    uint8_t mod, index;
-+    uint32_t i, grpsMap[FMAN_PORT_CG_MAP_NUM];
-+    int err;
-+#if (DPAA_VERSION >= 11)
-+    int j;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+
-+    /* un-necessary check of the indexes; probably will be needed in the future when there
-+     will be more CGs available ....
-+     for (i=0; i<p_CongestionGrps->numOfCongestionGrpsToConsider; i++)
-+     if (p_CongestionGrps->congestionGrpsToConsider[i] >= FM_PORT_NUM_OF_CONGESTION_GRPS)
-+     RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("CG id!"));
-+     */
-+
-+#ifdef FM_NO_OP_OBSERVED_CGS
-+    if ((p_FmPort->fmRevInfo.majorRev != 4) &&
-+            (p_FmPort->fmRevInfo.majorRev < 6))
-+    {
-+        if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G) &&
-+                (p_FmPort->portType != e_FM_PORT_TYPE_RX))
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("Available for Rx ports only"));
-+    }
-+    else
-+#endif /* FM_NO_OP_OBSERVED_CGS */
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_RX)
-+            && (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING))
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED,
-+                     ("Available for Rx & OP ports only"));
-+
-+    /* Prepare groups map array */
-+    memset(grpsMap, 0, FMAN_PORT_CG_MAP_NUM * sizeof(uint32_t));
-+    for (i = 0; i < p_CongestionGrps->numOfCongestionGrpsToConsider; i++)
-+    {
-+        index = (uint8_t)(p_CongestionGrps->congestionGrpsToConsider[i] / 32);
-+        mod = (uint8_t)(p_CongestionGrps->congestionGrpsToConsider[i] % 32);
-+        if (p_FmPort->fmRevInfo.majorRev != 4)
-+            grpsMap[7 - index] |= (uint32_t)(1 << mod);
-+        else
-+            grpsMap[0] |= (uint32_t)(1 << mod);
-+    }
-+
-+    memset(&priorityTmpArray, 0,
-+           FM_PORT_NUM_OF_CONGESTION_GRPS * sizeof(uint8_t));
-+
-+    for (i = 0; i < p_CongestionGrps->numOfCongestionGrpsToConsider; i++)
-+    {
-+#if (DPAA_VERSION >= 11)
-+        for (j = 0; j < FM_MAX_NUM_OF_PFC_PRIORITIES; j++)
-+            if (p_CongestionGrps->pfcPrioritiesEn[i][j])
-+                priorityTmpArray[p_CongestionGrps->congestionGrpsToConsider[i]] |=
-+                        (0x01 << (FM_MAX_NUM_OF_PFC_PRIORITIES - j - 1));
-+#endif /* (DPAA_VERSION >= 11) */
-+    }
-+
-+#if (DPAA_VERSION >= 11)
-+    for (i = 0; i < FM_PORT_NUM_OF_CONGESTION_GRPS; i++)
-+    {
-+        err = FmSetCongestionGroupPFCpriority(p_FmPort->h_Fm, i,
-+                                              priorityTmpArray[i]);
-+        if (err)
-+            return err;
-+    }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    err = fman_port_add_congestion_grps(&p_FmPort->port, grpsMap);
-+    if (err != 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fman_port_add_congestion_grps"));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_RemoveCongestionGrps(t_Handle h_FmPort,
-+                                     t_FmPortCongestionGrps *p_CongestionGrps)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+    uint8_t mod, index;
-+    uint32_t i, grpsMap[FMAN_PORT_CG_MAP_NUM];
-+    int err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+
-+    {
-+#ifdef FM_NO_OP_OBSERVED_CGS
-+        t_FmRevisionInfo revInfo;
-+
-+        FM_GetRevision(p_FmPort->h_Fm, &revInfo);
-+        if (revInfo.majorRev != 4)
-+        {
-+            if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G) &&
-+                    (p_FmPort->portType != e_FM_PORT_TYPE_RX))
-+            RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("Available for Rx ports only"));
-+        }
-+        else
-+#endif /* FM_NO_OP_OBSERVED_CGS */
-+        if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G)
-+                && (p_FmPort->portType != e_FM_PORT_TYPE_RX)
-+                && (p_FmPort->portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING))
-+            RETURN_ERROR(MAJOR, E_NOT_SUPPORTED,
-+                         ("Available for Rx & OP ports only"));
-+    }
-+
-+    /* Prepare groups map array */
-+    memset(grpsMap, 0, FMAN_PORT_CG_MAP_NUM * sizeof(uint32_t));
-+    for (i = 0; i < p_CongestionGrps->numOfCongestionGrpsToConsider; i++)
-+    {
-+        index = (uint8_t)(p_CongestionGrps->congestionGrpsToConsider[i] / 32);
-+        mod = (uint8_t)(p_CongestionGrps->congestionGrpsToConsider[i] % 32);
-+        if (p_FmPort->fmRevInfo.majorRev != 4)
-+            grpsMap[7 - index] |= (uint32_t)(1 << mod);
-+        else
-+            grpsMap[0] |= (uint32_t)(1 << mod);
-+    }
-+
-+#if (DPAA_VERSION >= 11)
-+    for (i = 0; i < p_CongestionGrps->numOfCongestionGrpsToConsider; i++)
-+    {
-+        t_Error err = FmSetCongestionGroupPFCpriority(
-+                p_FmPort->h_Fm, p_CongestionGrps->congestionGrpsToConsider[i],
-+                0);
-+        if (err)
-+            return err;
-+    }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    err = fman_port_remove_congestion_grps(&p_FmPort->port, grpsMap);
-+    if (err != 0)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("fman_port_remove_congestion_grps"));
-+    return E_OK;
-+}
-+
-+#if (DPAA_VERSION >= 11)
-+t_Error FM_PORT_GetIPv4OptionsCount(t_Handle h_FmPort,
-+                                    uint32_t *p_Ipv4OptionsCount)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(
-+            (p_FmPort->portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING),
-+            E_INVALID_VALUE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_ParamsPage, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_Ipv4OptionsCount, E_NULL_POINTER);
-+
-+    *p_Ipv4OptionsCount = GET_UINT32(p_FmPort->p_ParamsPage->ipfOptionsCounter);
-+
-+    return E_OK;
-+}
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+t_Error FM_PORT_ConfigDsarSupport(t_Handle h_FmPortRx,
-+                                  t_FmPortDsarTablesSizes *params)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort *)h_FmPortRx;
-+    p_FmPort->deepSleepVars.autoResMaxSizes = XX_Malloc(
-+            sizeof(struct t_FmPortDsarTablesSizes));
-+    memcpy(p_FmPort->deepSleepVars.autoResMaxSizes, params,
-+           sizeof(struct t_FmPortDsarTablesSizes));
-+    return E_OK;
-+}
-+
-+static t_Error FmPortConfigAutoResForDeepSleepSupport1(t_FmPort *p_FmPort)
-+{
-+    uint32_t *param_page;
-+    t_FmPortDsarTablesSizes *params = p_FmPort->deepSleepVars.autoResMaxSizes;
-+    t_ArCommonDesc *ArCommonDescPtr;
-+    uint32_t size = sizeof(t_ArCommonDesc);
-+    // ARP
-+    // should put here if (params->max_num_of_arp_entries)?
-+    size = ROUND_UP(size,4);
-+    size += sizeof(t_DsarArpDescriptor);
-+    size += sizeof(t_DsarArpBindingEntry) * params->maxNumOfArpEntries;
-+    size += sizeof(t_DsarArpStatistics);
-+    //ICMPV4
-+    size = ROUND_UP(size,4);
-+    size += sizeof(t_DsarIcmpV4Descriptor);
-+    size += sizeof(t_DsarIcmpV4BindingEntry) * params->maxNumOfEchoIpv4Entries;
-+    size += sizeof(t_DsarIcmpV4Statistics);
-+    //ICMPV6
-+    size = ROUND_UP(size,4);
-+    size += sizeof(t_DsarIcmpV6Descriptor);
-+    size += sizeof(t_DsarIcmpV6BindingEntry) * params->maxNumOfEchoIpv6Entries;
-+    size += sizeof(t_DsarIcmpV6Statistics);
-+    //ND
-+    size = ROUND_UP(size,4);
-+    size += sizeof(t_DsarNdDescriptor);
-+    size += sizeof(t_DsarIcmpV6BindingEntry) * params->maxNumOfNdpEntries;
-+    size += sizeof(t_DsarIcmpV6Statistics);
-+    //SNMP
-+    size = ROUND_UP(size,4);
-+    size += sizeof(t_DsarSnmpDescriptor);
-+    size += sizeof(t_DsarSnmpIpv4AddrTblEntry)
-+            * params->maxNumOfSnmpIPV4Entries;
-+    size += sizeof(t_DsarSnmpIpv6AddrTblEntry)
-+            * params->maxNumOfSnmpIPV6Entries;
-+    size += sizeof(t_OidsTblEntry) * params->maxNumOfSnmpOidEntries;
-+    size += params->maxNumOfSnmpOidChar;
-+    size += sizeof(t_DsarIcmpV6Statistics);
-+    //filters
-+    size = ROUND_UP(size,4);
-+    size += params->maxNumOfIpProtFiltering;
-+    size = ROUND_UP(size,4);
-+    size += params->maxNumOfUdpPortFiltering * sizeof(t_PortTblEntry);
-+    size = ROUND_UP(size,4);
-+    size += params->maxNumOfTcpPortFiltering * sizeof(t_PortTblEntry);
-+
-+    // add here for more protocols
-+
-+    // statistics
-+    size = ROUND_UP(size,4);
-+    size += sizeof(t_ArStatistics);
-+
-+    ArCommonDescPtr = FM_MURAM_AllocMem(p_FmPort->h_FmMuram, size, 0x10);
-+
-+    param_page =
-+            XX_PhysToVirt(
-+                    p_FmPort->fmMuramPhysBaseAddr
-+                            + GET_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rgpr));
-+    WRITE_UINT32(
-+            *param_page,
-+            (uint32_t)(XX_VirtToPhys(ArCommonDescPtr) - p_FmPort->fmMuramPhysBaseAddr));
-+    return E_OK;
-+}
-+
-+t_FmPortDsarTablesSizes* FM_PORT_GetDsarTablesMaxSizes(t_Handle h_FmPortRx)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort *)h_FmPortRx;
-+    return p_FmPort->deepSleepVars.autoResMaxSizes;
-+}
-+
-+struct arOffsets
-+{
-+    uint32_t arp;
-+    uint32_t nd;
-+    uint32_t icmpv4;
-+    uint32_t icmpv6;
-+    uint32_t snmp;
-+    uint32_t stats;
-+    uint32_t filtIp;
-+    uint32_t filtUdp;
-+    uint32_t filtTcp;
-+};
-+
-+static uint32_t AR_ComputeOffsets(struct arOffsets* of,
-+                                  struct t_FmPortDsarParams *params,
-+                                  t_FmPort *p_FmPort)
-+{
-+    uint32_t size = sizeof(t_ArCommonDesc);
-+    // ARP
-+    if (params->p_AutoResArpInfo)
-+    {
-+        size = ROUND_UP(size,4);
-+        of->arp = size;
-+        size += sizeof(t_DsarArpDescriptor);
-+        size += sizeof(t_DsarArpBindingEntry)
-+                * params->p_AutoResArpInfo->tableSize;
-+        size += sizeof(t_DsarArpStatistics);
-+    }
-+    // ICMPV4
-+    if (params->p_AutoResEchoIpv4Info)
-+    {
-+        size = ROUND_UP(size,4);
-+        of->icmpv4 = size;
-+        size += sizeof(t_DsarIcmpV4Descriptor);
-+        size += sizeof(t_DsarIcmpV4BindingEntry)
-+                * params->p_AutoResEchoIpv4Info->tableSize;
-+        size += sizeof(t_DsarIcmpV4Statistics);
-+    }
-+    // ICMPV6
-+    if (params->p_AutoResEchoIpv6Info)
-+    {
-+        size = ROUND_UP(size,4);
-+        of->icmpv6 = size;
-+        size += sizeof(t_DsarIcmpV6Descriptor);
-+        size += sizeof(t_DsarIcmpV6BindingEntry)
-+                * params->p_AutoResEchoIpv6Info->tableSize;
-+        size += sizeof(t_DsarIcmpV6Statistics);
-+    }
-+    // ND
-+    if (params->p_AutoResNdpInfo)
-+    {
-+        size = ROUND_UP(size,4);
-+        of->nd = size;
-+        size += sizeof(t_DsarNdDescriptor);
-+        size += sizeof(t_DsarIcmpV6BindingEntry)
-+                * (params->p_AutoResNdpInfo->tableSizeAssigned
-+                        + params->p_AutoResNdpInfo->tableSizeTmp);
-+        size += sizeof(t_DsarIcmpV6Statistics);
-+    }
-+    // SNMP
-+    if (params->p_AutoResSnmpInfo)
-+    {
-+        size = ROUND_UP(size,4);
-+        of->snmp = size;
-+        size += sizeof(t_DsarSnmpDescriptor);
-+        size += sizeof(t_DsarSnmpIpv4AddrTblEntry)
-+                * params->p_AutoResSnmpInfo->numOfIpv4Addresses;
-+        size += sizeof(t_DsarSnmpIpv6AddrTblEntry)
-+                * params->p_AutoResSnmpInfo->numOfIpv6Addresses;
-+        size += sizeof(t_OidsTblEntry) * params->p_AutoResSnmpInfo->oidsTblSize;
-+        size += p_FmPort->deepSleepVars.autoResMaxSizes->maxNumOfSnmpOidChar;
-+        size += sizeof(t_DsarIcmpV6Statistics);
-+    }
-+    //filters
-+    size = ROUND_UP(size,4);
-+    if (params->p_AutoResFilteringInfo)
-+    {
-+        of->filtIp = size;
-+        size += params->p_AutoResFilteringInfo->ipProtTableSize;
-+        size = ROUND_UP(size,4);
-+        of->filtUdp = size;
-+        size += params->p_AutoResFilteringInfo->udpPortsTableSize
-+                * sizeof(t_PortTblEntry);
-+        size = ROUND_UP(size,4);
-+        of->filtTcp = size;
-+        size += params->p_AutoResFilteringInfo->tcpPortsTableSize
-+                * sizeof(t_PortTblEntry);
-+    }
-+    // add here for more protocols
-+    // statistics
-+    size = ROUND_UP(size,4);
-+    of->stats = size;
-+    size += sizeof(t_ArStatistics);
-+    return size;
-+}
-+
-+uint32_t* ARDesc;
-+void PrsEnable(t_Handle p_FmPcd);
-+void PrsDisable(t_Handle p_FmPcd);
-+int PrsIsEnabled(t_Handle p_FmPcd);
-+t_Handle FM_PCD_GetHcPort(t_Handle h_FmPcd);
-+
-+static t_Error DsarCheckParams(t_FmPortDsarParams *params,
-+                               t_FmPortDsarTablesSizes *sizes)
-+{
-+    bool macInit = FALSE;
-+    uint8_t mac[6];
-+    int i = 0;
-+
-+    // check table sizes
-+    if (params->p_AutoResArpInfo
-+            && sizes->maxNumOfArpEntries < params->p_AutoResArpInfo->tableSize)
-+        RETURN_ERROR(
-+                MAJOR, E_INVALID_VALUE,
-+                ("DSAR: Arp table size exceeds the configured maximum size."));
-+    if (params->p_AutoResEchoIpv4Info
-+            && sizes->maxNumOfEchoIpv4Entries
-+                    < params->p_AutoResEchoIpv4Info->tableSize)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("DSAR: EchoIpv4 table size exceeds the configured maximum size."));
-+    if (params->p_AutoResNdpInfo
-+            && sizes->maxNumOfNdpEntries
-+                    < params->p_AutoResNdpInfo->tableSizeAssigned
-+                            + params->p_AutoResNdpInfo->tableSizeTmp)
-+        RETURN_ERROR(
-+                MAJOR, E_INVALID_VALUE,
-+                ("DSAR: NDP table size exceeds the configured maximum size."));
-+    if (params->p_AutoResEchoIpv6Info
-+            && sizes->maxNumOfEchoIpv6Entries
-+                    < params->p_AutoResEchoIpv6Info->tableSize)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("DSAR: EchoIpv6 table size exceeds the configured maximum size."));
-+    if (params->p_AutoResSnmpInfo
-+            && sizes->maxNumOfSnmpOidEntries
-+                    < params->p_AutoResSnmpInfo->oidsTblSize)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("DSAR: Snmp Oid table size exceeds the configured maximum size."));
-+    if (params->p_AutoResSnmpInfo
-+            && sizes->maxNumOfSnmpIPV4Entries
-+                    < params->p_AutoResSnmpInfo->numOfIpv4Addresses)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("DSAR: Snmp ipv4 table size exceeds the configured maximum size."));
-+    if (params->p_AutoResSnmpInfo
-+            && sizes->maxNumOfSnmpIPV6Entries
-+                    < params->p_AutoResSnmpInfo->numOfIpv6Addresses)
-+        RETURN_ERROR(
-+                MAJOR,
-+                E_INVALID_VALUE,
-+                ("DSAR: Snmp ipv6 table size exceeds the configured maximum size."));
-+    if (params->p_AutoResFilteringInfo)
-+    {
-+        if (sizes->maxNumOfIpProtFiltering
-+                < params->p_AutoResFilteringInfo->ipProtTableSize)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("DSAR: ip filter table size exceeds the configured maximum size."));
-+        if (sizes->maxNumOfTcpPortFiltering
-+                < params->p_AutoResFilteringInfo->udpPortsTableSize)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("DSAR: udp filter table size exceeds the configured maximum size."));
-+        if (sizes->maxNumOfUdpPortFiltering
-+                < params->p_AutoResFilteringInfo->tcpPortsTableSize)
-+            RETURN_ERROR(
-+                    MAJOR,
-+                    E_INVALID_VALUE,
-+                    ("DSAR: tcp filter table size exceeds the configured maximum size."));
-+    }
-+    /* check only 1 MAC address is configured (this is what ucode currently supports) */
-+    if (params->p_AutoResArpInfo && params->p_AutoResArpInfo->tableSize)
-+    {
-+        memcpy(mac, params->p_AutoResArpInfo->p_AutoResTable[0].mac, 6);
-+        i = 1;
-+        macInit = TRUE;
-+
-+        for (; i < params->p_AutoResArpInfo->tableSize; i++)
-+            if (memcmp(mac, params->p_AutoResArpInfo->p_AutoResTable[i].mac, 6))
-+                RETURN_ERROR(
-+                        MAJOR, E_INVALID_VALUE,
-+                        ("DSAR: Only 1 mac address is currently supported."));
-+    }
-+    if (params->p_AutoResEchoIpv4Info
-+            && params->p_AutoResEchoIpv4Info->tableSize)
-+    {
-+        i = 0;
-+        if (!macInit)
-+        {
-+            memcpy(mac, params->p_AutoResEchoIpv4Info->p_AutoResTable[0].mac,
-+                   6);
-+            i = 1;
-+            macInit = TRUE;
-+        }
-+        for (; i < params->p_AutoResEchoIpv4Info->tableSize; i++)
-+            if (memcmp(mac,
-+                       params->p_AutoResEchoIpv4Info->p_AutoResTable[i].mac, 6))
-+                RETURN_ERROR(
-+                        MAJOR, E_INVALID_VALUE,
-+                        ("DSAR: Only 1 mac address is currently supported."));
-+    }
-+    if (params->p_AutoResEchoIpv6Info
-+            && params->p_AutoResEchoIpv6Info->tableSize)
-+    {
-+        i = 0;
-+        if (!macInit)
-+        {
-+            memcpy(mac, params->p_AutoResEchoIpv6Info->p_AutoResTable[0].mac,
-+                   6);
-+            i = 1;
-+            macInit = TRUE;
-+        }
-+        for (; i < params->p_AutoResEchoIpv6Info->tableSize; i++)
-+            if (memcmp(mac,
-+                       params->p_AutoResEchoIpv6Info->p_AutoResTable[i].mac, 6))
-+                RETURN_ERROR(
-+                        MAJOR, E_INVALID_VALUE,
-+                        ("DSAR: Only 1 mac address is currently supported."));
-+    }
-+    if (params->p_AutoResNdpInfo && params->p_AutoResNdpInfo->tableSizeAssigned)
-+    {
-+        i = 0;
-+        if (!macInit)
-+        {
-+            memcpy(mac, params->p_AutoResNdpInfo->p_AutoResTableAssigned[0].mac,
-+                   6);
-+            i = 1;
-+            macInit = TRUE;
-+        }
-+        for (; i < params->p_AutoResNdpInfo->tableSizeAssigned; i++)
-+            if (memcmp(mac,
-+                       params->p_AutoResNdpInfo->p_AutoResTableAssigned[i].mac,
-+                       6))
-+                RETURN_ERROR(
-+                        MAJOR, E_INVALID_VALUE,
-+                        ("DSAR: Only 1 mac address is currently supported."));
-+    }
-+    if (params->p_AutoResNdpInfo && params->p_AutoResNdpInfo->tableSizeTmp)
-+    {
-+        i = 0;
-+        if (!macInit)
-+        {
-+            memcpy(mac, params->p_AutoResNdpInfo->p_AutoResTableTmp[0].mac, 6);
-+            i = 1;
-+        }
-+        for (; i < params->p_AutoResNdpInfo->tableSizeTmp; i++)
-+            if (memcmp(mac, params->p_AutoResNdpInfo->p_AutoResTableTmp[i].mac,
-+                       6))
-+                RETURN_ERROR(
-+                        MAJOR, E_INVALID_VALUE,
-+                        ("DSAR: Only 1 mac address is currently supported."));
-+    }
-+    return E_OK;
-+}
-+
-+static int GetBERLen(uint8_t* buf)
-+{
-+    if (*buf & 0x80)
-+    {
-+        if ((*buf & 0x7F) == 1)
-+            return buf[1];
-+        else
-+            return *(uint16_t*)&buf[1]; // assuming max len is 2
-+    }
-+    else
-+        return buf[0];
-+}
-+#define TOTAL_BER_LEN(len) (len < 128) ? len + 2 : len + 3
-+
-+#define SCFG_FMCLKDPSLPCR_ADDR 0xFFE0FC00C
-+#define SCFG_FMCLKDPSLPCR_DS_VAL 0x08402000
-+#define SCFG_FMCLKDPSLPCR_NORMAL_VAL 0x00402000
-+static int fm_soc_suspend(void)
-+{
-+	uint32_t *fmclk, tmp32;
-+	fmclk = ioremap(SCFG_FMCLKDPSLPCR_ADDR, 4);
-+	tmp32 = GET_UINT32(*fmclk);
-+	WRITE_UINT32(*fmclk, SCFG_FMCLKDPSLPCR_DS_VAL);
-+	tmp32 = GET_UINT32(*fmclk);
-+	iounmap(fmclk);
-+	return 0;
-+}
-+
-+void fm_clk_down(void)
-+{
-+	uint32_t *fmclk, tmp32;
-+	fmclk = ioremap(SCFG_FMCLKDPSLPCR_ADDR, 4);
-+	tmp32 = GET_UINT32(*fmclk);
-+	WRITE_UINT32(*fmclk, SCFG_FMCLKDPSLPCR_DS_VAL | 0x40000000);
-+	tmp32 = GET_UINT32(*fmclk);
-+	iounmap(fmclk);
-+}
-+
-+t_Error FM_PORT_EnterDsar(t_Handle h_FmPortRx, t_FmPortDsarParams *params)
-+{
-+    int i, j;
-+    t_Error err;
-+    uint32_t nia;
-+    t_FmPort *p_FmPort = (t_FmPort *)h_FmPortRx;
-+    t_FmPort *p_FmPortTx = (t_FmPort *)params->h_FmPortTx;
-+    t_DsarArpDescriptor *ArpDescriptor;
-+    t_DsarIcmpV4Descriptor* ICMPV4Descriptor;
-+    t_DsarIcmpV6Descriptor* ICMPV6Descriptor;
-+    t_DsarNdDescriptor* NDDescriptor;
-+
-+    uint64_t fmMuramVirtBaseAddr = (uint64_t)PTR_TO_UINT(XX_PhysToVirt(p_FmPort->fmMuramPhysBaseAddr));
-+    uint32_t *param_page = XX_PhysToVirt(p_FmPort->fmMuramPhysBaseAddr + GET_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rgpr));
-+    t_ArCommonDesc *ArCommonDescPtr = (t_ArCommonDesc*)(XX_PhysToVirt(p_FmPort->fmMuramPhysBaseAddr + GET_UINT32(*param_page)));
-+    struct arOffsets* of;
-+    uint8_t tmp = 0;
-+    t_FmGetSetParams fmGetSetParams;
-+    memset(&fmGetSetParams, 0, sizeof (t_FmGetSetParams));
-+    fmGetSetParams.setParams.type = UPDATE_FPM_BRKC_SLP;
-+    fmGetSetParams.setParams.sleep = 1;    
-+
-+    err = DsarCheckParams(params, p_FmPort->deepSleepVars.autoResMaxSizes);
-+    if (err != E_OK)
-+        return err;
-+
-+    p_FmPort->deepSleepVars.autoResOffsets = XX_Malloc(sizeof(struct arOffsets));
-+    of = (struct arOffsets *)p_FmPort->deepSleepVars.autoResOffsets;
-+    IOMemSet32(ArCommonDescPtr, 0, AR_ComputeOffsets(of, params, p_FmPort));
-+
-+    // common
-+    WRITE_UINT8(ArCommonDescPtr->arTxPort, p_FmPortTx->hardwarePortId);
-+    nia = GET_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfne); // bmi nia
-+    if ((nia & 0x007C0000) == 0x00440000) // bmi nia is parser
-+        WRITE_UINT32(ArCommonDescPtr->activeHPNIA, GET_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfpne));
-+    else
-+        WRITE_UINT32(ArCommonDescPtr->activeHPNIA, nia);
-+    WRITE_UINT16(ArCommonDescPtr->snmpPort, 161);
-+
-+    // ARP
-+    if (params->p_AutoResArpInfo)
-+    {
-+        t_DsarArpBindingEntry* arp_bindings;
-+        ArpDescriptor = (t_DsarArpDescriptor*)(PTR_TO_UINT(ArCommonDescPtr) + of->arp);
-+        WRITE_UINT32(ArCommonDescPtr->p_ArpDescriptor, PTR_TO_UINT(ArpDescriptor) - fmMuramVirtBaseAddr);
-+        arp_bindings = (t_DsarArpBindingEntry*)(PTR_TO_UINT(ArpDescriptor) + sizeof(t_DsarArpDescriptor));
-+	if (params->p_AutoResArpInfo->enableConflictDetection)
-+	        WRITE_UINT16(ArpDescriptor->control, 1);
-+	else
-+        WRITE_UINT16(ArpDescriptor->control, 0);
-+        if (params->p_AutoResArpInfo->tableSize)
-+        {
-+            t_FmPortDsarArpEntry* arp_entry = params->p_AutoResArpInfo->p_AutoResTable;
-+            WRITE_UINT16(*(uint16_t*)&ArCommonDescPtr->macStationAddr[0], *(uint16_t*)&arp_entry[0].mac[0]);
-+            WRITE_UINT32(*(uint32_t*)&ArCommonDescPtr->macStationAddr[2], *(uint32_t*)&arp_entry[0].mac[2]);
-+            WRITE_UINT16(ArpDescriptor->numOfBindings, params->p_AutoResArpInfo->tableSize);
-+
-+            for (i = 0; i < params->p_AutoResArpInfo->tableSize; i++)
-+            {
-+                WRITE_UINT32(arp_bindings[i].ipv4Addr, arp_entry[i].ipAddress);
-+                if (arp_entry[i].isVlan)
-+                    WRITE_UINT16(arp_bindings[i].vlanId, arp_entry[i].vid & 0xFFF);
-+            }
-+            WRITE_UINT32(ArpDescriptor->p_Bindings, PTR_TO_UINT(arp_bindings) - fmMuramVirtBaseAddr);
-+        }
-+        WRITE_UINT32(ArpDescriptor->p_Statistics, PTR_TO_UINT(arp_bindings) +
-+            sizeof(t_DsarArpBindingEntry) * params->p_AutoResArpInfo->tableSize - fmMuramVirtBaseAddr);
-+    }
-+
-+    // ICMPV4
-+    if (params->p_AutoResEchoIpv4Info)
-+    {
-+        t_DsarIcmpV4BindingEntry* icmpv4_bindings;
-+        ICMPV4Descriptor = (t_DsarIcmpV4Descriptor*)(PTR_TO_UINT(ArCommonDescPtr) + of->icmpv4);
-+        WRITE_UINT32(ArCommonDescPtr->p_IcmpV4Descriptor, PTR_TO_UINT(ICMPV4Descriptor) - fmMuramVirtBaseAddr);
-+        icmpv4_bindings = (t_DsarIcmpV4BindingEntry*)(PTR_TO_UINT(ICMPV4Descriptor) + sizeof(t_DsarIcmpV4Descriptor));
-+        WRITE_UINT16(ICMPV4Descriptor->control, 0);
-+        if (params->p_AutoResEchoIpv4Info->tableSize)
-+        {
-+            t_FmPortDsarArpEntry* arp_entry = params->p_AutoResEchoIpv4Info->p_AutoResTable;
-+            WRITE_UINT16(*(uint16_t*)&ArCommonDescPtr->macStationAddr[0], *(uint16_t*)&arp_entry[0].mac[0]);
-+            WRITE_UINT32(*(uint32_t*)&ArCommonDescPtr->macStationAddr[2], *(uint32_t*)&arp_entry[0].mac[2]);
-+            WRITE_UINT16(ICMPV4Descriptor->numOfBindings, params->p_AutoResEchoIpv4Info->tableSize);
-+
-+            for (i = 0; i < params->p_AutoResEchoIpv4Info->tableSize; i++)
-+            {
-+                WRITE_UINT32(icmpv4_bindings[i].ipv4Addr, arp_entry[i].ipAddress);
-+                if (arp_entry[i].isVlan)
-+                    WRITE_UINT16(icmpv4_bindings[i].vlanId, arp_entry[i].vid & 0xFFF);
-+            }
-+            WRITE_UINT32(ICMPV4Descriptor->p_Bindings, PTR_TO_UINT(icmpv4_bindings) - fmMuramVirtBaseAddr);
-+        }
-+        WRITE_UINT32(ICMPV4Descriptor->p_Statistics, PTR_TO_UINT(icmpv4_bindings) +
-+            sizeof(t_DsarIcmpV4BindingEntry) * params->p_AutoResEchoIpv4Info->tableSize - fmMuramVirtBaseAddr);
-+    }
-+
-+    // ICMPV6
-+    if (params->p_AutoResEchoIpv6Info)
-+    {
-+        t_DsarIcmpV6BindingEntry* icmpv6_bindings;
-+        ICMPV6Descriptor = (t_DsarIcmpV6Descriptor*)(PTR_TO_UINT(ArCommonDescPtr) + of->icmpv6);
-+        WRITE_UINT32(ArCommonDescPtr->p_IcmpV6Descriptor, PTR_TO_UINT(ICMPV6Descriptor) - fmMuramVirtBaseAddr);
-+        icmpv6_bindings = (t_DsarIcmpV6BindingEntry*)(PTR_TO_UINT(ICMPV6Descriptor) + sizeof(t_DsarIcmpV6Descriptor));
-+        WRITE_UINT16(ICMPV6Descriptor->control, 0);
-+        if (params->p_AutoResEchoIpv6Info->tableSize)
-+        {
-+            t_FmPortDsarNdpEntry* ndp_entry = params->p_AutoResEchoIpv6Info->p_AutoResTable;
-+            WRITE_UINT16(*(uint16_t*)&ArCommonDescPtr->macStationAddr[0], *(uint16_t*)&ndp_entry[0].mac[0]);
-+            WRITE_UINT32(*(uint32_t*)&ArCommonDescPtr->macStationAddr[2], *(uint32_t*)&ndp_entry[0].mac[2]);
-+            WRITE_UINT16(ICMPV6Descriptor->numOfBindings, params->p_AutoResEchoIpv6Info->tableSize);
-+
-+            for (i = 0; i < params->p_AutoResEchoIpv6Info->tableSize; i++)
-+            {
-+                for (j = 0; j < 4; j++)
-+                    WRITE_UINT32(icmpv6_bindings[i].ipv6Addr[j], ndp_entry[i].ipAddress[j]);
-+                if (ndp_entry[i].isVlan)
-+                    WRITE_UINT16(*(uint16_t*)&icmpv6_bindings[i].ipv6Addr[4], ndp_entry[i].vid & 0xFFF); // writing vlan
-+            }
-+            WRITE_UINT32(ICMPV6Descriptor->p_Bindings, PTR_TO_UINT(icmpv6_bindings) - fmMuramVirtBaseAddr);
-+        }
-+        WRITE_UINT32(ICMPV6Descriptor->p_Statistics, PTR_TO_UINT(icmpv6_bindings) +
-+            sizeof(t_DsarIcmpV6BindingEntry) * params->p_AutoResEchoIpv6Info->tableSize - fmMuramVirtBaseAddr);
-+    }
-+
-+    // ND
-+    if (params->p_AutoResNdpInfo)
-+    {
-+        t_DsarIcmpV6BindingEntry* icmpv6_bindings;
-+        NDDescriptor = (t_DsarNdDescriptor*)(PTR_TO_UINT(ArCommonDescPtr) + of->nd);
-+        WRITE_UINT32(ArCommonDescPtr->p_NdDescriptor, PTR_TO_UINT(NDDescriptor) - fmMuramVirtBaseAddr);
-+        icmpv6_bindings = (t_DsarIcmpV6BindingEntry*)(PTR_TO_UINT(NDDescriptor) + sizeof(t_DsarNdDescriptor));
-+	if (params->p_AutoResNdpInfo->enableConflictDetection)
-+	        WRITE_UINT16(NDDescriptor->control, 1);
-+	else
-+        WRITE_UINT16(NDDescriptor->control, 0);
-+        if (params->p_AutoResNdpInfo->tableSizeAssigned + params->p_AutoResNdpInfo->tableSizeTmp)
-+        {
-+            t_FmPortDsarNdpEntry* ndp_entry = params->p_AutoResNdpInfo->p_AutoResTableAssigned;
-+            WRITE_UINT16(*(uint16_t*)&ArCommonDescPtr->macStationAddr[0], *(uint16_t*)&ndp_entry[0].mac[0]);
-+            WRITE_UINT32(*(uint32_t*)&ArCommonDescPtr->macStationAddr[2], *(uint32_t*)&ndp_entry[0].mac[2]);
-+            WRITE_UINT16(NDDescriptor->numOfBindings, params->p_AutoResNdpInfo->tableSizeAssigned
-+                + params->p_AutoResNdpInfo->tableSizeTmp);
-+
-+            for (i = 0; i < params->p_AutoResNdpInfo->tableSizeAssigned; i++)
-+            {
-+                for (j = 0; j < 4; j++)
-+                    WRITE_UINT32(icmpv6_bindings[i].ipv6Addr[j], ndp_entry[i].ipAddress[j]);
-+                if (ndp_entry[i].isVlan)
-+                    WRITE_UINT16(*(uint16_t*)&icmpv6_bindings[i].ipv6Addr[4], ndp_entry[i].vid & 0xFFF); // writing vlan
-+            }
-+            ndp_entry = params->p_AutoResNdpInfo->p_AutoResTableTmp;
-+            for (i = 0; i < params->p_AutoResNdpInfo->tableSizeTmp; i++)
-+            {
-+                for (j = 0; j < 4; j++)
-+                    WRITE_UINT32(icmpv6_bindings[i + params->p_AutoResNdpInfo->tableSizeAssigned].ipv6Addr[j], ndp_entry[i].ipAddress[j]);
-+                if (ndp_entry[i].isVlan)
-+                    WRITE_UINT16(*(uint16_t*)&icmpv6_bindings[i + params->p_AutoResNdpInfo->tableSizeAssigned].ipv6Addr[4], ndp_entry[i].vid & 0xFFF); // writing vlan
-+            }
-+            WRITE_UINT32(NDDescriptor->p_Bindings, PTR_TO_UINT(icmpv6_bindings) - fmMuramVirtBaseAddr);
-+        }
-+        WRITE_UINT32(NDDescriptor->p_Statistics, PTR_TO_UINT(icmpv6_bindings) + sizeof(t_DsarIcmpV6BindingEntry)
-+            * (params->p_AutoResNdpInfo->tableSizeAssigned + params->p_AutoResNdpInfo->tableSizeTmp)
-+            - fmMuramVirtBaseAddr);
-+        WRITE_UINT32(NDDescriptor->solicitedAddr, 0xFFFFFFFF);
-+    }
-+
-+    // SNMP
-+    if (params->p_AutoResSnmpInfo)
-+    {
-+        t_FmPortDsarSnmpInfo *snmpSrc = params->p_AutoResSnmpInfo;
-+        t_DsarSnmpIpv4AddrTblEntry* snmpIpv4Addr;
-+        t_DsarSnmpIpv6AddrTblEntry* snmpIpv6Addr;
-+        t_OidsTblEntry* snmpOid;
-+        uint8_t *charPointer;
-+        int len;
-+        t_DsarSnmpDescriptor* SnmpDescriptor = (t_DsarSnmpDescriptor*)(PTR_TO_UINT(ArCommonDescPtr) + of->snmp);
-+        WRITE_UINT32(ArCommonDescPtr->p_SnmpDescriptor, PTR_TO_UINT(SnmpDescriptor) - fmMuramVirtBaseAddr);
-+        WRITE_UINT16(SnmpDescriptor->control, snmpSrc->control);
-+        WRITE_UINT16(SnmpDescriptor->maxSnmpMsgLength, snmpSrc->maxSnmpMsgLength);
-+        snmpIpv4Addr = (t_DsarSnmpIpv4AddrTblEntry*)(PTR_TO_UINT(SnmpDescriptor) + sizeof(t_DsarSnmpDescriptor));
-+        if (snmpSrc->numOfIpv4Addresses)
-+        {
-+            t_FmPortDsarSnmpIpv4AddrTblEntry* snmpIpv4AddrSrc = snmpSrc->p_Ipv4AddrTbl;
-+            WRITE_UINT16(SnmpDescriptor->numOfIpv4Addresses, snmpSrc->numOfIpv4Addresses);
-+            for (i = 0; i < snmpSrc->numOfIpv4Addresses; i++)
-+            {
-+                WRITE_UINT32(snmpIpv4Addr[i].ipv4Addr, snmpIpv4AddrSrc[i].ipv4Addr);
-+                if (snmpIpv4AddrSrc[i].isVlan)
-+                    WRITE_UINT16(snmpIpv4Addr[i].vlanId, snmpIpv4AddrSrc[i].vid & 0xFFF);
-+            }
-+            WRITE_UINT32(SnmpDescriptor->p_Ipv4AddrTbl, PTR_TO_UINT(snmpIpv4Addr) - fmMuramVirtBaseAddr);
-+        }
-+        snmpIpv6Addr = (t_DsarSnmpIpv6AddrTblEntry*)(PTR_TO_UINT(snmpIpv4Addr)
-+                + sizeof(t_DsarSnmpIpv4AddrTblEntry) * snmpSrc->numOfIpv4Addresses);
-+        if (snmpSrc->numOfIpv6Addresses)
-+        {
-+            t_FmPortDsarSnmpIpv6AddrTblEntry* snmpIpv6AddrSrc = snmpSrc->p_Ipv6AddrTbl;
-+            WRITE_UINT16(SnmpDescriptor->numOfIpv6Addresses, snmpSrc->numOfIpv6Addresses);
-+            for (i = 0; i < snmpSrc->numOfIpv6Addresses; i++)
-+            {
-+                for (j = 0; j < 4; j++)
-+                    WRITE_UINT32(snmpIpv6Addr[i].ipv6Addr[j], snmpIpv6AddrSrc[i].ipv6Addr[j]);
-+                if (snmpIpv6AddrSrc[i].isVlan)
-+                    WRITE_UINT16(snmpIpv6Addr[i].vlanId, snmpIpv6AddrSrc[i].vid & 0xFFF);
-+            }
-+            WRITE_UINT32(SnmpDescriptor->p_Ipv6AddrTbl, PTR_TO_UINT(snmpIpv6Addr) - fmMuramVirtBaseAddr);
-+        }
-+        snmpOid = (t_OidsTblEntry*)(PTR_TO_UINT(snmpIpv6Addr)
-+                + sizeof(t_DsarSnmpIpv6AddrTblEntry) * snmpSrc->numOfIpv6Addresses);
-+        charPointer = (uint8_t*)(PTR_TO_UINT(snmpOid)
-+                + sizeof(t_OidsTblEntry) * snmpSrc->oidsTblSize);
-+        len = TOTAL_BER_LEN(GetBERLen(&snmpSrc->p_RdOnlyCommunityStr[1]));
-+        Mem2IOCpy32(charPointer, snmpSrc->p_RdOnlyCommunityStr, len);
-+        WRITE_UINT32(SnmpDescriptor->p_RdOnlyCommunityStr, PTR_TO_UINT(charPointer) - fmMuramVirtBaseAddr);
-+        charPointer += len;
-+        len = TOTAL_BER_LEN(GetBERLen(&snmpSrc->p_RdWrCommunityStr[1]));
-+        Mem2IOCpy32(charPointer, snmpSrc->p_RdWrCommunityStr, len);
-+        WRITE_UINT32(SnmpDescriptor->p_RdWrCommunityStr, PTR_TO_UINT(charPointer) - fmMuramVirtBaseAddr);
-+        charPointer += len;
-+        WRITE_UINT32(SnmpDescriptor->oidsTblSize, snmpSrc->oidsTblSize);
-+        WRITE_UINT32(SnmpDescriptor->p_OidsTbl, PTR_TO_UINT(snmpOid) - fmMuramVirtBaseAddr);
-+        for (i = 0; i < snmpSrc->oidsTblSize; i++)
-+        {
-+            WRITE_UINT16(snmpOid->oidSize, snmpSrc->p_OidsTbl[i].oidSize);
-+            WRITE_UINT16(snmpOid->resSize, snmpSrc->p_OidsTbl[i].resSize);
-+            Mem2IOCpy32(charPointer, snmpSrc->p_OidsTbl[i].oidVal, snmpSrc->p_OidsTbl[i].oidSize);
-+            WRITE_UINT32(snmpOid->p_Oid, PTR_TO_UINT(charPointer) - fmMuramVirtBaseAddr);
-+            charPointer += snmpSrc->p_OidsTbl[i].oidSize;
-+            if (snmpSrc->p_OidsTbl[i].resSize <= 4)
-+                WRITE_UINT32(snmpOid->resValOrPtr, *snmpSrc->p_OidsTbl[i].resVal);
-+            else
-+            {
-+                Mem2IOCpy32(charPointer, snmpSrc->p_OidsTbl[i].resVal, snmpSrc->p_OidsTbl[i].resSize);
-+                WRITE_UINT32(snmpOid->resValOrPtr, PTR_TO_UINT(charPointer) - fmMuramVirtBaseAddr);
-+                charPointer += snmpSrc->p_OidsTbl[i].resSize;
-+            }
-+            snmpOid++;
-+        }
-+        charPointer = UINT_TO_PTR(ROUND_UP(PTR_TO_UINT(charPointer),4));
-+        WRITE_UINT32(SnmpDescriptor->p_Statistics, PTR_TO_UINT(charPointer) - fmMuramVirtBaseAddr);
-+    }
-+
-+    // filtering
-+    if (params->p_AutoResFilteringInfo)
-+    {
-+        if (params->p_AutoResFilteringInfo->ipProtPassOnHit)
-+            tmp |= IP_PROT_TBL_PASS_MASK;
-+        if (params->p_AutoResFilteringInfo->udpPortPassOnHit)
-+            tmp |= UDP_PORT_TBL_PASS_MASK;
-+        if (params->p_AutoResFilteringInfo->tcpPortPassOnHit)
-+            tmp |= TCP_PORT_TBL_PASS_MASK;
-+        WRITE_UINT8(ArCommonDescPtr->filterControl, tmp);
-+        WRITE_UINT16(ArCommonDescPtr->tcpControlPass, params->p_AutoResFilteringInfo->tcpFlagsMask);
-+
-+        // ip filtering
-+        if (params->p_AutoResFilteringInfo->ipProtTableSize)
-+        {
-+            uint8_t* ip_tbl = (uint8_t*)(PTR_TO_UINT(ArCommonDescPtr) + of->filtIp);
-+            WRITE_UINT8(ArCommonDescPtr->ipProtocolTblSize, params->p_AutoResFilteringInfo->ipProtTableSize);
-+            for (i = 0; i < params->p_AutoResFilteringInfo->ipProtTableSize; i++)
-+                WRITE_UINT8(ip_tbl[i], params->p_AutoResFilteringInfo->p_IpProtTablePtr[i]);
-+            WRITE_UINT32(ArCommonDescPtr->p_IpProtocolFiltTbl, PTR_TO_UINT(ip_tbl) - fmMuramVirtBaseAddr);
-+        }
-+
-+        // udp filtering
-+        if (params->p_AutoResFilteringInfo->udpPortsTableSize)
-+        {
-+            t_PortTblEntry* udp_tbl = (t_PortTblEntry*)(PTR_TO_UINT(ArCommonDescPtr) + of->filtUdp);
-+            WRITE_UINT8(ArCommonDescPtr->udpPortTblSize, params->p_AutoResFilteringInfo->udpPortsTableSize);
-+            for (i = 0; i < params->p_AutoResFilteringInfo->udpPortsTableSize; i++)
-+            {
-+                WRITE_UINT32(udp_tbl[i].Ports,
-+                    (params->p_AutoResFilteringInfo->p_UdpPortsTablePtr[i].srcPort << 16) +
-+                    params->p_AutoResFilteringInfo->p_UdpPortsTablePtr[i].dstPort);
-+                WRITE_UINT32(udp_tbl[i].PortsMask,
-+                    (params->p_AutoResFilteringInfo->p_UdpPortsTablePtr[i].srcPortMask << 16) +
-+                    params->p_AutoResFilteringInfo->p_UdpPortsTablePtr[i].dstPortMask);
-+            }
-+            WRITE_UINT32(ArCommonDescPtr->p_UdpPortFiltTbl, PTR_TO_UINT(udp_tbl) - fmMuramVirtBaseAddr);
-+        }
-+
-+        // tcp filtering
-+        if (params->p_AutoResFilteringInfo->tcpPortsTableSize)
-+        {
-+            t_PortTblEntry* tcp_tbl = (t_PortTblEntry*)(PTR_TO_UINT(ArCommonDescPtr) + of->filtTcp);
-+            WRITE_UINT8(ArCommonDescPtr->tcpPortTblSize, params->p_AutoResFilteringInfo->tcpPortsTableSize);
-+            for (i = 0; i < params->p_AutoResFilteringInfo->tcpPortsTableSize; i++)
-+            {
-+                WRITE_UINT32(tcp_tbl[i].Ports,
-+                    (params->p_AutoResFilteringInfo->p_TcpPortsTablePtr[i].srcPort << 16) +
-+                    params->p_AutoResFilteringInfo->p_TcpPortsTablePtr[i].dstPort);
-+                WRITE_UINT32(tcp_tbl[i].PortsMask,
-+                    (params->p_AutoResFilteringInfo->p_TcpPortsTablePtr[i].srcPortMask << 16) +
-+                    params->p_AutoResFilteringInfo->p_TcpPortsTablePtr[i].dstPortMask);
-+            }
-+            WRITE_UINT32(ArCommonDescPtr->p_TcpPortFiltTbl, PTR_TO_UINT(tcp_tbl) - fmMuramVirtBaseAddr);
-+        }
-+    }
-+    // common stats
-+    WRITE_UINT32(ArCommonDescPtr->p_ArStats, PTR_TO_UINT(ArCommonDescPtr) + of->stats - fmMuramVirtBaseAddr);
-+
-+    // get into Deep Sleep sequence:
-+
-+	// Ensures that FMan do not enter the idle state. This is done by programing
-+	// FMDPSLPCR[FM_STOP] to one.
-+	fm_soc_suspend();
-+
-+    ARDesc = UINT_TO_PTR(XX_VirtToPhys(ArCommonDescPtr));
-+    return E_OK;
-+
-+}
-+
-+void FM_ChangeClock(t_Handle h_Fm, int hardwarePortId);
-+t_Error FM_PORT_EnterDsarFinal(t_Handle h_DsarRxPort, t_Handle h_DsarTxPort)
-+{
-+	t_FmGetSetParams fmGetSetParams;
-+	t_FmPort *p_FmPort = (t_FmPort *)h_DsarRxPort;
-+	t_FmPort *p_FmPortTx = (t_FmPort *)h_DsarTxPort;
-+	t_Handle *h_FmPcd = FmGetPcd(p_FmPort->h_Fm);
-+	t_FmPort *p_FmPortHc = FM_PCD_GetHcPort(h_FmPcd);
-+	memset(&fmGetSetParams, 0, sizeof (t_FmGetSetParams));
-+        fmGetSetParams.setParams.type = UPDATE_FM_CLD;
-+        FmGetSetParams(p_FmPort->h_Fm, &fmGetSetParams);
-+
-+	/* Issue graceful stop to HC port */
-+	FM_PORT_Disable(p_FmPortHc);
-+
-+	// config tx port
-+    p_FmPort->deepSleepVars.fmbm_tcfg = GET_UINT32(p_FmPortTx->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tcfg);
-+    WRITE_UINT32(p_FmPortTx->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tcfg, GET_UINT32(p_FmPortTx->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tcfg) | BMI_PORT_CFG_IM | BMI_PORT_CFG_EN);
-+    // ????
-+    p_FmPort->deepSleepVars.fmbm_tcmne = GET_UINT32(p_FmPortTx->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tcmne);
-+    WRITE_UINT32(p_FmPortTx->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tcmne, 0xE);
-+    // Stage 7:echo
-+    p_FmPort->deepSleepVars.fmbm_rfpne = GET_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfpne);
-+    WRITE_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfpne, 0x2E);
-+    if (!PrsIsEnabled(h_FmPcd))
-+    {
-+        p_FmPort->deepSleepVars.dsarEnabledParser = TRUE;
-+        PrsEnable(h_FmPcd);
-+    }
-+    else
-+        p_FmPort->deepSleepVars.dsarEnabledParser = FALSE;
-+
-+    p_FmPort->deepSleepVars.fmbm_rfne = GET_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfne);
-+    WRITE_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfne, 0x440000);
-+
-+    // save rcfg for restoring: accumulate mode is changed by ucode
-+    p_FmPort->deepSleepVars.fmbm_rcfg = GET_UINT32(p_FmPort->port.bmi_regs->rx.fmbm_rcfg);
-+    WRITE_UINT32(p_FmPort->port.bmi_regs->rx.fmbm_rcfg, p_FmPort->deepSleepVars.fmbm_rcfg | BMI_PORT_CFG_AM);
-+        memset(&fmGetSetParams, 0, sizeof (t_FmGetSetParams));
-+        fmGetSetParams.setParams.type = UPDATE_FPM_BRKC_SLP;
-+        fmGetSetParams.setParams.sleep = 1;
-+        FmGetSetParams(p_FmPort->h_Fm, &fmGetSetParams);
-+
-+// ***** issue external request sync command
-+        memset(&fmGetSetParams, 0, sizeof (t_FmGetSetParams));
-+        fmGetSetParams.setParams.type = UPDATE_FPM_EXTC;
-+        FmGetSetParams(p_FmPort->h_Fm, &fmGetSetParams);
-+	// get
-+	memset(&fmGetSetParams, 0, sizeof (t_FmGetSetParams));
-+	fmGetSetParams.getParams.type = GET_FMFP_EXTC;
-+	FmGetSetParams(p_FmPort->h_Fm, &fmGetSetParams);
-+	if (fmGetSetParams.getParams.fmfp_extc != 0)
-+	{
-+		// clear
-+		memset(&fmGetSetParams, 0, sizeof (t_FmGetSetParams));
-+		fmGetSetParams.setParams.type = UPDATE_FPM_EXTC_CLEAR;
-+		FmGetSetParams(p_FmPort->h_Fm, &fmGetSetParams);
-+}
-+
-+	memset(&fmGetSetParams, 0, sizeof (t_FmGetSetParams));
-+	fmGetSetParams.getParams.type = GET_FMFP_EXTC | GET_FM_NPI;
-+	do
-+	{
-+		FmGetSetParams(p_FmPort->h_Fm, &fmGetSetParams);
-+	} while (fmGetSetParams.getParams.fmfp_extc != 0 && fmGetSetParams.getParams.fm_npi == 0);
-+	if (fmGetSetParams.getParams.fm_npi != 0)
-+		XX_Print("FM: Sync did not finish\n");
-+
-+        // check that all stoped
-+	memset(&fmGetSetParams, 0, sizeof (t_FmGetSetParams));
-+        fmGetSetParams.getParams.type = GET_FMQM_GS | GET_FM_NPI;
-+        FmGetSetParams(p_FmPort->h_Fm, &fmGetSetParams);
-+	while (fmGetSetParams.getParams.fmqm_gs & 0xF0000000)
-+	        FmGetSetParams(p_FmPort->h_Fm, &fmGetSetParams);
-+	if (fmGetSetParams.getParams.fmqm_gs == 0 && fmGetSetParams.getParams.fm_npi == 0)
-+		XX_Print("FM: Sleeping\n");
-+//	FM_ChangeClock(p_FmPort->h_Fm, p_FmPort->hardwarePortId);
-+
-+    return E_OK;
-+}
-+
-+EXPORT_SYMBOL(FM_PORT_EnterDsarFinal);
-+
-+void FM_PORT_Dsar_DumpRegs()
-+{
-+    uint32_t* hh = XX_PhysToVirt(PTR_TO_UINT(ARDesc));
-+    DUMP_MEMORY(hh, 0x220);
-+}
-+
-+void FM_PORT_ExitDsar(t_Handle h_FmPortRx, t_Handle h_FmPortTx)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort *)h_FmPortRx;
-+    t_FmPort *p_FmPortTx = (t_FmPort *)h_FmPortTx;
-+    t_Handle *h_FmPcd = FmGetPcd(p_FmPort->h_Fm);
-+    t_FmPort *p_FmPortHc = FM_PCD_GetHcPort(h_FmPcd);
-+    t_FmGetSetParams fmGetSetParams;
-+    memset(&fmGetSetParams, 0, sizeof (t_FmGetSetParams));
-+    fmGetSetParams.setParams.type = UPDATE_FPM_BRKC_SLP;
-+    fmGetSetParams.setParams.sleep = 0;
-+    if (p_FmPort->deepSleepVars.autoResOffsets)
-+    {
-+        XX_Free(p_FmPort->deepSleepVars.autoResOffsets);
-+        p_FmPort->deepSleepVars.autoResOffsets = 0;
-+    }
-+
-+    if (p_FmPort->deepSleepVars.dsarEnabledParser)
-+        PrsDisable(FmGetPcd(p_FmPort->h_Fm));
-+    WRITE_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfpne, p_FmPort->deepSleepVars.fmbm_rfpne);
-+    WRITE_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfne, p_FmPort->deepSleepVars.fmbm_rfne);
-+    WRITE_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rcfg, p_FmPort->deepSleepVars.fmbm_rcfg);
-+    FmGetSetParams(p_FmPort->h_Fm, &fmGetSetParams);
-+    WRITE_UINT32(p_FmPortTx->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tcmne, p_FmPort->deepSleepVars.fmbm_tcmne);
-+    WRITE_UINT32(p_FmPortTx->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tcfg, p_FmPort->deepSleepVars.fmbm_tcfg);
-+    FM_PORT_Enable(p_FmPortHc);
-+}
-+
-+bool FM_PORT_IsInDsar(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort *)h_FmPort;
-+    return PTR_TO_UINT(p_FmPort->deepSleepVars.autoResOffsets);
-+}
-+
-+t_Error FM_PORT_GetDsarStats(t_Handle h_FmPortRx, t_FmPortDsarStats *stats)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort *)h_FmPortRx;
-+    struct arOffsets *of = (struct arOffsets*)p_FmPort->deepSleepVars.autoResOffsets;
-+    uint8_t* fmMuramVirtBaseAddr = XX_PhysToVirt(p_FmPort->fmMuramPhysBaseAddr);
-+    uint32_t *param_page = XX_PhysToVirt(p_FmPort->fmMuramPhysBaseAddr + GET_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rgpr));
-+    t_ArCommonDesc *ArCommonDescPtr = (t_ArCommonDesc*)(XX_PhysToVirt(p_FmPort->fmMuramPhysBaseAddr + GET_UINT32(*param_page)));
-+    t_DsarArpDescriptor *ArpDescriptor = (t_DsarArpDescriptor*)(PTR_TO_UINT(ArCommonDescPtr) + of->arp);
-+    t_DsarArpStatistics* arp_stats = (t_DsarArpStatistics*)(PTR_TO_UINT(ArpDescriptor->p_Statistics) + fmMuramVirtBaseAddr);
-+    t_DsarIcmpV4Descriptor* ICMPV4Descriptor = (t_DsarIcmpV4Descriptor*)(PTR_TO_UINT(ArCommonDescPtr) + of->icmpv4);
-+    t_DsarIcmpV4Statistics* icmpv4_stats = (t_DsarIcmpV4Statistics*)(PTR_TO_UINT(ICMPV4Descriptor->p_Statistics) + fmMuramVirtBaseAddr);
-+    t_DsarNdDescriptor* NDDescriptor = (t_DsarNdDescriptor*)(PTR_TO_UINT(ArCommonDescPtr) + of->nd);
-+    t_NdStatistics* nd_stats = (t_NdStatistics*)(PTR_TO_UINT(NDDescriptor->p_Statistics) + fmMuramVirtBaseAddr);
-+    t_DsarIcmpV6Descriptor* ICMPV6Descriptor = (t_DsarIcmpV6Descriptor*)(PTR_TO_UINT(ArCommonDescPtr) + of->icmpv6);
-+    t_DsarIcmpV6Statistics* icmpv6_stats = (t_DsarIcmpV6Statistics*)(PTR_TO_UINT(ICMPV6Descriptor->p_Statistics) + fmMuramVirtBaseAddr);
-+    t_DsarSnmpDescriptor* SnmpDescriptor = (t_DsarSnmpDescriptor*)(PTR_TO_UINT(ArCommonDescPtr) + of->snmp);
-+    t_DsarSnmpStatistics* snmp_stats = (t_DsarSnmpStatistics*)(PTR_TO_UINT(SnmpDescriptor->p_Statistics) + fmMuramVirtBaseAddr);
-+    stats->arpArCnt = arp_stats->arCnt;
-+    stats->echoIcmpv4ArCnt = icmpv4_stats->arCnt;
-+    stats->ndpArCnt = nd_stats->arCnt;
-+    stats->echoIcmpv6ArCnt = icmpv6_stats->arCnt;
-+    stats->snmpGetCnt = snmp_stats->snmpGetReqCnt;
-+    stats->snmpGetNextCnt = snmp_stats->snmpGetNextReqCnt;
-+    return E_OK;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.h
-@@ -0,0 +1,999 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_port.h
-+
-+ @Description   FM Port internal structures and definitions.
-+*//***************************************************************************/
-+#ifndef __FM_PORT_H
-+#define __FM_PORT_H
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+#include "fm_port_ext.h"
-+
-+#include "fm_common.h"
-+#include "fm_sp_common.h"
-+#include "fsl_fman_sp.h"
-+#include "fm_port_ext.h"
-+#include "fsl_fman_port.h"
-+
-+#define __ERR_MODULE__  MODULE_FM_PORT
-+
-+
-+#define MIN_EXT_BUF_SIZE                                64
-+#define DATA_ALIGNMENT                                  64
-+#define MAX_LIODN_OFFSET                                64
-+#define MAX_PORT_FIFO_SIZE                              MIN(BMI_MAX_FIFO_SIZE, 1024*BMI_FIFO_UNITS)
-+
-+/**************************************************************************//**
-+ @Description       Memory Map defines
-+*//***************************************************************************/
-+#define BMI_PORT_REGS_OFFSET                            0
-+#define QMI_PORT_REGS_OFFSET                            0x400
-+#define PRS_PORT_REGS_OFFSET                            0x800
-+
-+/**************************************************************************//**
-+ @Description       defaults
-+*//***************************************************************************/
-+#define DEFAULT_PORT_deqHighPriority_1G                 FALSE
-+#define DEFAULT_PORT_deqHighPriority_10G                TRUE
-+#define DEFAULT_PORT_deqType                            e_FM_PORT_DEQ_TYPE1
-+#define DEFAULT_PORT_deqPrefetchOption                  e_FM_PORT_DEQ_FULL_PREFETCH
-+#define DEFAULT_PORT_deqPrefetchOption_HC               e_FM_PORT_DEQ_NO_PREFETCH
-+#define DEFAULT_PORT_deqByteCnt_10G                     0x1400
-+#define DEFAULT_PORT_deqByteCnt_1G                      0x400
-+#define DEFAULT_PORT_bufferPrefixContent_privDataSize   DEFAULT_FM_SP_bufferPrefixContent_privDataSize
-+#define DEFAULT_PORT_bufferPrefixContent_passPrsResult  DEFAULT_FM_SP_bufferPrefixContent_passPrsResult
-+#define DEFAULT_PORT_bufferPrefixContent_passTimeStamp  DEFAULT_FM_SP_bufferPrefixContent_passTimeStamp
-+#define DEFAULT_PORT_bufferPrefixContent_allOtherPCDInfo DEFAULT_FM_SP_bufferPrefixContent_allOtherPCDInfo
-+#define DEFAULT_PORT_bufferPrefixContent_dataAlign      DEFAULT_FM_SP_bufferPrefixContent_dataAlign
-+#define DEFAULT_PORT_cheksumLastBytesIgnore             0
-+#define DEFAULT_PORT_cutBytesFromEnd                    4
-+#define DEFAULT_PORT_fifoDeqPipelineDepth_IM            2
-+
-+#define DEFAULT_PORT_frmDiscardOverride                 FALSE
-+
-+#define DEFAULT_PORT_dmaSwapData                        (e_FmDmaSwapOption)DEFAULT_FMAN_SP_DMA_SWAP_DATA
-+#define DEFAULT_PORT_dmaIntContextCacheAttr             (e_FmDmaCacheOption)DEFAULT_FMAN_SP_DMA_INT_CONTEXT_CACHE_ATTR
-+#define DEFAULT_PORT_dmaHeaderCacheAttr                 (e_FmDmaCacheOption)DEFAULT_FMAN_SP_DMA_HEADER_CACHE_ATTR
-+#define DEFAULT_PORT_dmaScatterGatherCacheAttr          (e_FmDmaCacheOption)DEFAULT_FMAN_SP_DMA_SCATTER_GATHER_CACHE_ATTR
-+#define DEFAULT_PORT_dmaWriteOptimize                   DEFAULT_FMAN_SP_DMA_WRITE_OPTIMIZE
-+
-+#define DEFAULT_PORT_noScatherGather                    DEFAULT_FMAN_SP_NO_SCATTER_GATHER
-+#define DEFAULT_PORT_forwardIntContextReuse             FALSE
-+#define DEFAULT_PORT_BufMargins_startMargins            32
-+#define DEFAULT_PORT_BufMargins_endMargins              0
-+#define DEFAULT_PORT_syncReq                            TRUE
-+#define DEFAULT_PORT_syncReqForHc                       FALSE
-+#define DEFAULT_PORT_color                              e_FM_PORT_COLOR_GREEN
-+#define DEFAULT_PORT_errorsToDiscard                    FM_PORT_FRM_ERR_CLS_DISCARD
-+/* #define DEFAULT_PORT_dualRateLimitScaleDown             e_FM_PORT_DUAL_RATE_LIMITER_NONE */
-+/* #define DEFAULT_PORT_rateLimitBurstSizeHighGranularity  FALSE */
-+#define DEFAULT_PORT_exception                          IM_EV_BSY
-+#define DEFAULT_PORT_maxFrameLength                     9600
-+
-+#define DEFAULT_notSupported                            0xff
-+
-+#if (DPAA_VERSION < 11)
-+#define DEFAULT_PORT_rxFifoPriElevationLevel            MAX_PORT_FIFO_SIZE
-+#define DEFAULT_PORT_rxFifoThreshold                    (MAX_PORT_FIFO_SIZE*3/4)
-+
-+#define DEFAULT_PORT_txFifoMinFillLevel                 0
-+#define DEFAULT_PORT_txFifoLowComfLevel                 (5*KILOBYTE)
-+#define DEFAULT_PORT_fifoDeqPipelineDepth_1G            1
-+#define DEFAULT_PORT_fifoDeqPipelineDepth_10G           4
-+
-+#define DEFAULT_PORT_fifoDeqPipelineDepth_OH            2
-+
-+/* Host command port MUST NOT be changed to more than 1 !!! */
-+#define DEFAULT_PORT_numOfTasks(type)                       \
-+    (uint32_t)((((type) == e_FM_PORT_TYPE_RX_10G) ||        \
-+                ((type) == e_FM_PORT_TYPE_TX_10G)) ? 16 :   \
-+               ((((type) == e_FM_PORT_TYPE_RX) ||           \
-+                 ((type) == e_FM_PORT_TYPE_TX) ||           \
-+                 ((type) == e_FM_PORT_TYPE_OH_OFFLINE_PARSING)) ? 3 : 1))
-+
-+#define DEFAULT_PORT_extraNumOfTasks(type)                  \
-+    (uint32_t)(((type) == e_FM_PORT_TYPE_RX_10G)  ? 8 :    \
-+               (((type) == e_FM_PORT_TYPE_RX) ? 2 : 0))
-+
-+#define DEFAULT_PORT_numOfOpenDmas(type)                    \
-+    (uint32_t)((((type) == e_FM_PORT_TYPE_TX_10G) ||        \
-+                ((type) == e_FM_PORT_TYPE_RX_10G)) ? 8 : 1 )
-+
-+#define DEFAULT_PORT_extraNumOfOpenDmas(type)               \
-+    (uint32_t)(((type) == e_FM_PORT_TYPE_RX_10G) ? 8 :    \
-+               (((type) == e_FM_PORT_TYPE_RX) ? 1 : 0))
-+
-+#define DEFAULT_PORT_numOfFifoBufs(type)                    \
-+    (uint32_t)((((type) == e_FM_PORT_TYPE_RX_10G) ||        \
-+                ((type) == e_FM_PORT_TYPE_TX_10G)) ? 48 :   \
-+                ((type) == e_FM_PORT_TYPE_RX) ? 45 :        \
-+                ((type) == e_FM_PORT_TYPE_TX) ? 44 : 8)
-+
-+#define DEFAULT_PORT_extraNumOfFifoBufs             0
-+
-+#else  /* (DPAA_VERSION < 11) */
-+/* Defaults are registers' reset values */
-+#define DEFAULT_PORT_rxFifoPriElevationLevel            MAX_PORT_FIFO_SIZE
-+#define DEFAULT_PORT_rxFifoThreshold                    MAX_PORT_FIFO_SIZE
-+
-+#define DEFAULT_PORT_txFifoMinFillLevel                 0
-+#define DEFAULT_PORT_txFifoLowComfLevel                 (5 * KILOBYTE)
-+#define DEFAULT_PORT_fifoDeqPipelineDepth_1G            2
-+#define DEFAULT_PORT_fifoDeqPipelineDepth_10G           4
-+
-+#define DEFAULT_PORT_fifoDeqPipelineDepth_OH            2
-+
-+#define DEFAULT_PORT_numOfTasks(type)                       \
-+    (uint32_t)((((type) == e_FM_PORT_TYPE_RX_10G) ||        \
-+                ((type) == e_FM_PORT_TYPE_TX_10G)) ? 14 :   \
-+               (((type) == e_FM_PORT_TYPE_RX) ||            \
-+                 ((type) == e_FM_PORT_TYPE_TX)) ? 4 :       \
-+                 ((type) == e_FM_PORT_TYPE_OH_OFFLINE_PARSING) ? 6 : 1)
-+
-+#define DEFAULT_PORT_extraNumOfTasks(type)          0
-+
-+#define DEFAULT_PORT_numOfOpenDmas(type)                    \
-+    (uint32_t)(((type) == e_FM_PORT_TYPE_RX_10G) ? 8 :      \
-+               ((type) == e_FM_PORT_TYPE_TX_10G) ? 12 :     \
-+               ((type) == e_FM_PORT_TYPE_RX)     ? 2 :      \
-+               ((type) == e_FM_PORT_TYPE_TX)     ? 3 :      \
-+               ((type) == e_FM_PORT_TYPE_OH_HOST_COMMAND) ? 2 : 4)
-+
-+#define DEFAULT_PORT_extraNumOfOpenDmas(type)       0
-+
-+#define DEFAULT_PORT_numOfFifoBufs(type)                   \
-+    (uint32_t) (((type) == e_FM_PORT_TYPE_RX_10G) ? 96 : \
-+                ((type) == e_FM_PORT_TYPE_TX_10G) ? 64 : \
-+                ((type) == e_FM_PORT_TYPE_OH_HOST_COMMAND) ? 10 : 50)
-+
-+#define DEFAULT_PORT_extraNumOfFifoBufs             0
-+
-+#endif /* (DPAA_VERSION < 11) */
-+
-+#define DEFAULT_PORT_txBdRingLength                 16
-+#define DEFAULT_PORT_rxBdRingLength                 128
-+#define DEFAULT_PORT_ImfwExtStructsMemId            0
-+#define DEFAULT_PORT_ImfwExtStructsMemAttr          MEMORY_ATTR_CACHEABLE
-+
-+#define FM_PORT_CG_REG_NUM(_cgId) (((FM_PORT_NUM_OF_CONGESTION_GRPS/32)-1)-_cgId/32)
-+
-+/**************************************************************************//**
-+ @Collection    PCD Engines
-+*//***************************************************************************/
-+typedef uint32_t fmPcdEngines_t; /**< options as defined below: */
-+
-+#define FM_PCD_NONE                                 0                   /**< No PCD Engine indicated */
-+#define FM_PCD_PRS                                  0x80000000          /**< Parser indicated */
-+#define FM_PCD_KG                                   0x40000000          /**< Keygen indicated */
-+#define FM_PCD_CC                                   0x20000000          /**< Coarse classification indicated */
-+#define FM_PCD_PLCR                                 0x10000000          /**< Policer indicated */
-+#define FM_PCD_MANIP                                0x08000000          /**< Manipulation indicated */
-+/* @} */
-+
-+#define FM_PORT_MAX_NUM_OF_EXT_POOLS_ALL_INTEGRATIONS       8
-+#define FM_PORT_MAX_NUM_OF_CONGESTION_GRPS_ALL_INTEGRATIONS 256
-+#define FM_PORT_CG_REG_NUM(_cgId) (((FM_PORT_NUM_OF_CONGESTION_GRPS/32)-1)-_cgId/32)
-+
-+#define FM_OH_PORT_ID                               0
-+
-+/***********************************************************************/
-+/*          SW parser OFFLOAD labels (offsets)                         */
-+/***********************************************************************/
-+#if (DPAA_VERSION == 10)
-+#define OFFLOAD_SW_PATCH_IPv4_IPR_LABEL         0x300
-+#define OFFLOAD_SW_PATCH_IPv6_IPR_LABEL         0x325
-+#define OFFLOAD_SW_PATCH_IPv6_IPF_LABEL         0x325
-+#else
-+#define OFFLOAD_SW_PATCH_IPv4_IPR_LABEL         0x100
-+/* Will be used for:
-+ * 1. identify fragments
-+ * 2. udp-lite
-+ */
-+#define OFFLOAD_SW_PATCH_IPv6_IPR_LABEL         0x146
-+/* Will be used for:
-+ * 1. will identify the fragmentable area
-+ * 2. udp-lite
-+ */
-+#define OFFLOAD_SW_PATCH_IPv6_IPF_LABEL         0x261
-+#define OFFLOAD_SW_PATCH_CAPWAP_LABEL           0x38d
-+#endif /* (DPAA_VERSION == 10) */
-+
-+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+#define UDP_LITE_SW_PATCH_LABEL                 0x2E0
-+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
-+
-+
-+/**************************************************************************//**
-+ @Description       Memory Mapped Registers
-+*//***************************************************************************/
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(push,1)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+typedef struct
-+{
-+    volatile uint32_t   fmbm_rcfg;      /**< Rx Configuration */
-+    volatile uint32_t   fmbm_rst;       /**< Rx Status */
-+    volatile uint32_t   fmbm_rda;       /**< Rx DMA attributes*/
-+    volatile uint32_t   fmbm_rfp;       /**< Rx FIFO Parameters*/
-+    volatile uint32_t   fmbm_rfed;      /**< Rx Frame End Data*/
-+    volatile uint32_t   fmbm_ricp;      /**< Rx Internal Context Parameters*/
-+    volatile uint32_t   fmbm_rim;       /**< Rx Internal Buffer Margins*/
-+    volatile uint32_t   fmbm_rebm;      /**< Rx External Buffer Margins*/
-+    volatile uint32_t   fmbm_rfne;      /**< Rx Frame Next Engine*/
-+    volatile uint32_t   fmbm_rfca;      /**< Rx Frame Command Attributes.*/
-+    volatile uint32_t   fmbm_rfpne;     /**< Rx Frame Parser Next Engine*/
-+    volatile uint32_t   fmbm_rpso;      /**< Rx Parse Start Offset*/
-+    volatile uint32_t   fmbm_rpp;       /**< Rx Policer Profile  */
-+    volatile uint32_t   fmbm_rccb;      /**< Rx Coarse Classification Base */
-+    volatile uint32_t   fmbm_reth;      /**< Rx Excessive Threshold */
-+    volatile uint32_t   reserved1[0x01];/**< (0x03C) */
-+    volatile uint32_t   fmbm_rprai[FM_PORT_PRS_RESULT_NUM_OF_WORDS];
-+                                        /**< Rx Parse Results Array Initialization*/
-+    volatile uint32_t   fmbm_rfqid;     /**< Rx Frame Queue ID*/
-+    volatile uint32_t   fmbm_refqid;    /**< Rx Error Frame Queue ID*/
-+    volatile uint32_t   fmbm_rfsdm;     /**< Rx Frame Status Discard Mask*/
-+    volatile uint32_t   fmbm_rfsem;     /**< Rx Frame Status Error Mask*/
-+    volatile uint32_t   fmbm_rfene;     /**< Rx Frame Enqueue Next Engine */
-+    volatile uint32_t   reserved2[0x02];/**< (0x074-0x078) */
-+    volatile uint32_t   fmbm_rcmne;     /**< Rx Frame Continuous Mode Next Engine */
-+    volatile uint32_t   reserved3[0x20];/**< (0x080 0x0FF)  */
-+    volatile uint32_t   fmbm_ebmpi[FM_PORT_MAX_NUM_OF_EXT_POOLS_ALL_INTEGRATIONS];
-+                                        /**< Buffer Manager pool Information-*/
-+    volatile uint32_t   fmbm_acnt[FM_PORT_MAX_NUM_OF_EXT_POOLS_ALL_INTEGRATIONS];
-+                                        /**< Allocate Counter-*/
-+    volatile uint32_t   reserved4[0x08];
-+                                        /**< 0x130/0x140 - 0x15F reserved -*/
-+    volatile uint32_t   fmbm_rcgm[FM_PORT_MAX_NUM_OF_CONGESTION_GRPS_ALL_INTEGRATIONS/32];
-+                                        /**< Congestion Group Map*/
-+    volatile uint32_t   fmbm_rmpd;      /**< BM Pool Depletion  */
-+    volatile uint32_t   reserved5[0x1F];/**< (0x184 0x1FF) */
-+    volatile uint32_t   fmbm_rstc;      /**< Rx Statistics Counters*/
-+    volatile uint32_t   fmbm_rfrc;      /**< Rx Frame Counter*/
-+    volatile uint32_t   fmbm_rfbc;      /**< Rx Bad Frames Counter*/
-+    volatile uint32_t   fmbm_rlfc;      /**< Rx Large Frames Counter*/
-+    volatile uint32_t   fmbm_rffc;      /**< Rx Filter Frames Counter*/
-+    volatile uint32_t   fmbm_rfcd;      /**< Rx Frame Discard Counter*/
-+    volatile uint32_t   fmbm_rfldec;    /**< Rx Frames List DMA Error Counter*/
-+    volatile uint32_t   fmbm_rodc;      /**< Rx Out of Buffers Discard Counter-*/
-+    volatile uint32_t   fmbm_rbdc;      /**< Rx Buffers Deallocate Counter-*/
-+    volatile uint32_t   fmbm_rpec;      /**< Rx RX Prepare to enqueue Counter-*/
-+    volatile uint32_t   reserved6[0x16];/**< (0x228 0x27F) */
-+    volatile uint32_t   fmbm_rpc;       /**< Rx Performance Counters*/
-+    volatile uint32_t   fmbm_rpcp;      /**< Rx Performance Count Parameters*/
-+    volatile uint32_t   fmbm_rccn;      /**< Rx Cycle Counter*/
-+    volatile uint32_t   fmbm_rtuc;      /**< Rx Tasks Utilization Counter*/
-+    volatile uint32_t   fmbm_rrquc;     /**< Rx Receive Queue Utilization Counter*/
-+    volatile uint32_t   fmbm_rduc;      /**< Rx DMA Utilization Counter*/
-+    volatile uint32_t   fmbm_rfuc;      /**< Rx FIFO Utilization Counter*/
-+    volatile uint32_t   fmbm_rpac;      /**< Rx Pause Activation Counter*/
-+    volatile uint32_t   reserved7[0x18];/**< (0x2A0-0x2FF) */
-+    volatile uint32_t   fmbm_rdcfg[0x3];/**< Rx Debug-*/
-+    volatile uint32_t   fmbm_rgpr;      /**< Rx General Purpose Register. */
-+    volatile uint32_t   reserved8[0x3a];/**< (0x310-0x3FF) */
-+} t_FmPortRxBmiRegs;
-+
-+typedef struct
-+{
-+    volatile uint32_t   fmbm_tcfg;      /**< Tx Configuration */
-+    volatile uint32_t   fmbm_tst;       /**< Tx Status */
-+    volatile uint32_t   fmbm_tda;       /**< Tx DMA attributes */
-+    volatile uint32_t   fmbm_tfp;       /**< Tx FIFO Parameters */
-+    volatile uint32_t   fmbm_tfed;      /**< Tx Frame End Data */
-+    volatile uint32_t   fmbm_ticp;      /**< Tx Internal Context Parameters */
-+    volatile uint32_t   fmbm_tfdne;     /**< Tx Frame Dequeue Next Engine. */
-+    volatile uint32_t   fmbm_tfca;      /**< Tx Frame Command attribute. */
-+    volatile uint32_t   fmbm_tcfqid;    /**< Tx Confirmation Frame Queue ID. */
-+    volatile uint32_t   fmbm_tfeqid;    /**< Tx Frame Error Queue ID */
-+    volatile uint32_t   fmbm_tfene;     /**< Tx Frame Enqueue Next Engine */
-+    volatile uint32_t   fmbm_trlmts;    /**< Tx Rate Limiter Scale */
-+    volatile uint32_t   fmbm_trlmt;     /**< Tx Rate Limiter */
-+    volatile uint32_t   fmbm_tccb;      /**< Tx Coarse Classification Base */
-+    volatile uint32_t   reserved0[0x0e];/**< (0x038-0x070) */
-+    volatile uint32_t   fmbm_tfne;      /**< Tx Frame Next Engine */
-+    volatile uint32_t   fmbm_tpfcm[0x02];/**< Tx Priority based Flow Control (PFC) Mapping */
-+    volatile uint32_t   fmbm_tcmne;     /**< Tx Frame Continuous Mode Next Engine */
-+    volatile uint32_t   reserved2[0x60];/**< (0x080-0x200) */
-+    volatile uint32_t   fmbm_tstc;      /**< Tx Statistics Counters */
-+    volatile uint32_t   fmbm_tfrc;      /**< Tx Frame Counter */
-+    volatile uint32_t   fmbm_tfdc;      /**< Tx Frames Discard Counter */
-+    volatile uint32_t   fmbm_tfledc;    /**< Tx Frame Length error discard counter */
-+    volatile uint32_t   fmbm_tfufdc;    /**< Tx Frame unsupported format discard Counter */
-+    volatile uint32_t   fmbm_tbdc;      /**< Tx Buffers Deallocate Counter */
-+    volatile uint32_t   reserved3[0x1A];/**< (0x218-0x280) */
-+    volatile uint32_t   fmbm_tpc;       /**< Tx Performance Counters*/
-+    volatile uint32_t   fmbm_tpcp;      /**< Tx Performance Count Parameters*/
-+    volatile uint32_t   fmbm_tccn;      /**< Tx Cycle Counter*/
-+    volatile uint32_t   fmbm_ttuc;      /**< Tx Tasks Utilization Counter*/
-+    volatile uint32_t   fmbm_ttcquc;    /**< Tx Transmit Confirm Queue Utilization Counter*/
-+    volatile uint32_t   fmbm_tduc;      /**< Tx DMA Utilization Counter*/
-+    volatile uint32_t   fmbm_tfuc;      /**< Tx FIFO Utilization Counter*/
-+    volatile uint32_t   reserved4[16];  /**< (0x29C-0x2FF) */
-+    volatile uint32_t   fmbm_tdcfg[0x3];/**< Tx Debug-*/
-+    volatile uint32_t   fmbm_tgpr;      /**< O/H General Purpose Register */
-+    volatile uint32_t   reserved5[0x3a];/**< (0x310-0x3FF) */
-+} t_FmPortTxBmiRegs;
-+
-+typedef struct
-+{
-+    volatile uint32_t   fmbm_ocfg;      /**< O/H Configuration  */
-+    volatile uint32_t   fmbm_ost;       /**< O/H Status */
-+    volatile uint32_t   fmbm_oda;       /**< O/H DMA attributes  */
-+    volatile uint32_t   fmbm_oicp;      /**< O/H Internal Context Parameters  */
-+    volatile uint32_t   fmbm_ofdne;     /**< O/H Frame Dequeue Next Engine  */
-+    volatile uint32_t   fmbm_ofne;      /**< O/H Frame Next Engine  */
-+    volatile uint32_t   fmbm_ofca;      /**< O/H Frame Command Attributes.  */
-+    volatile uint32_t   fmbm_ofpne;     /**< O/H Frame Parser Next Engine  */
-+    volatile uint32_t   fmbm_opso;      /**< O/H Parse Start Offset  */
-+    volatile uint32_t   fmbm_opp;       /**< O/H Policer Profile */
-+    volatile uint32_t   fmbm_occb;      /**< O/H Coarse Classification base */
-+    volatile uint32_t   fmbm_oim;       /**< O/H Internal margins*/
-+    volatile uint32_t   fmbm_ofp;       /**< O/H Fifo Parameters*/
-+    volatile uint32_t   fmbm_ofed;      /**< O/H Frame End Data*/
-+    volatile uint32_t   reserved0[2];   /**< (0x038 - 0x03F) */
-+    volatile uint32_t   fmbm_oprai[FM_PORT_PRS_RESULT_NUM_OF_WORDS];
-+                                        /**< O/H Parse Results Array Initialization  */
-+    volatile uint32_t   fmbm_ofqid;     /**< O/H Frame Queue ID  */
-+    volatile uint32_t   fmbm_oefqid;    /**< O/H Error Frame Queue ID  */
-+    volatile uint32_t   fmbm_ofsdm;     /**< O/H Frame Status Discard Mask  */
-+    volatile uint32_t   fmbm_ofsem;     /**< O/H Frame Status Error Mask  */
-+    volatile uint32_t   fmbm_ofene;     /**< O/H Frame Enqueue Next Engine  */
-+    volatile uint32_t   fmbm_orlmts;    /**< O/H Rate Limiter Scale  */
-+    volatile uint32_t   fmbm_orlmt;     /**< O/H Rate Limiter  */
-+    volatile uint32_t   fmbm_ocmne;     /**< O/H Continuous Mode Next Engine  */
-+    volatile uint32_t   reserved1[0x20];/**< (0x080 - 0x0FF) */
-+    volatile uint32_t   fmbm_oebmpi[2]; /**< Buffer Manager Observed Pool Information */
-+    volatile uint32_t   reserved2[0x16];/**< (0x108 - 0x15F) */
-+    volatile uint32_t   fmbm_ocgm;      /**< Observed Congestion Group Map */
-+    volatile uint32_t   reserved3[0x7]; /**< (0x164 - 0x17F) */
-+    volatile uint32_t   fmbm_ompd;      /**< Observed BMan Pool Depletion */
-+    volatile uint32_t   reserved4[0x1F];/**< (0x184 - 0x1FF) */
-+    volatile uint32_t   fmbm_ostc;      /**< O/H Statistics Counters  */
-+    volatile uint32_t   fmbm_ofrc;      /**< O/H Frame Counter  */
-+    volatile uint32_t   fmbm_ofdc;      /**< O/H Frames Discard Counter  */
-+    volatile uint32_t   fmbm_ofledc;    /**< O/H Frames Length Error Discard Counter  */
-+    volatile uint32_t   fmbm_ofufdc;    /**< O/H Frames Unsupported Format Discard Counter  */
-+    volatile uint32_t   fmbm_offc;      /**< O/H Filter Frames Counter  */
-+    volatile uint32_t   fmbm_ofwdc;     /**< - Rx Frames WRED Discard Counter  */
-+    volatile uint32_t   fmbm_ofldec;    /**< O/H Frames List DMA Error Counter */
-+    volatile uint32_t   fmbm_obdc;      /**< O/H Buffers Deallocate Counter */
-+    volatile uint32_t   fmbm_oodc;      /**< O/H Out of Buffers Discard Counter */
-+    volatile uint32_t   fmbm_opec;      /**< O/H Prepare to enqueue Counter */
-+    volatile uint32_t   reserved5[0x15];/**< ( - 0x27F) */
-+    volatile uint32_t   fmbm_opc;       /**< O/H Performance Counters  */
-+    volatile uint32_t   fmbm_opcp;      /**< O/H Performance Count Parameters  */
-+    volatile uint32_t   fmbm_occn;      /**< O/H Cycle Counter  */
-+    volatile uint32_t   fmbm_otuc;      /**< O/H Tasks Utilization Counter  */
-+    volatile uint32_t   fmbm_oduc;      /**< O/H DMA Utilization Counter */
-+    volatile uint32_t   fmbm_ofuc;      /**< O/H FIFO Utilization Counter */
-+    volatile uint32_t   reserved6[26];  /**< (0x298-0x2FF) */
-+    volatile uint32_t   fmbm_odcfg[0x3];/**< O/H Debug (only 1 in P1023) */
-+    volatile uint32_t   fmbm_ogpr;      /**< O/H General Purpose Register. */
-+    volatile uint32_t   reserved7[0x3a];/**< (0x310 0x3FF) */
-+} t_FmPortOhBmiRegs;
-+
-+typedef union
-+{
-+    t_FmPortRxBmiRegs rxPortBmiRegs;
-+    t_FmPortTxBmiRegs txPortBmiRegs;
-+    t_FmPortOhBmiRegs ohPortBmiRegs;
-+} u_FmPortBmiRegs;
-+
-+typedef struct
-+{
-+    volatile uint32_t   reserved1[2];   /**<   0xn024 - 0x02B */
-+    volatile uint32_t   fmqm_pndn;      /**<   PortID n Dequeue NIA Register */
-+    volatile uint32_t   fmqm_pndc;      /**<   PortID n Dequeue Config Register */
-+    volatile uint32_t   fmqm_pndtfc;    /**<   PortID n Dequeue Total Frame Counter */
-+    volatile uint32_t   fmqm_pndfdc;    /**<   PortID n Dequeue FQID from Default Counter */
-+    volatile uint32_t   fmqm_pndcc;     /**<   PortID n Dequeue Confirm Counter */
-+} t_FmPortNonRxQmiRegs;
-+
-+typedef struct
-+{
-+    volatile uint32_t   fmqm_pnc;       /**<   PortID n Configuration Register */
-+    volatile uint32_t   fmqm_pns;       /**<   PortID n Status Register */
-+    volatile uint32_t   fmqm_pnts;      /**<   PortID n Task Status Register */
-+    volatile uint32_t   reserved0[4];   /**<   0xn00C - 0xn01B */
-+    volatile uint32_t   fmqm_pnen;      /**<   PortID n Enqueue NIA Register */
-+    volatile uint32_t   fmqm_pnetfc;    /**<   PortID n Enqueue Total Frame Counter */
-+    t_FmPortNonRxQmiRegs nonRxQmiRegs;  /**<   Registers for Tx Hc & Op ports */
-+} t_FmPortQmiRegs;
-+
-+typedef struct
-+{
-+     struct
-+    {
-+        volatile uint32_t   softSeqAttach;  /**<   Soft Sequence Attachment */
-+        volatile uint32_t   lcv;            /**<   Line-up Enable Confirmation Mask */
-+    } hdrs[FM_PCD_PRS_NUM_OF_HDRS];
-+    volatile uint32_t   reserved0[0xde];
-+    volatile uint32_t   pcac;               /**<   Parse Internal Memory Configuration Access Control Register */
-+    volatile uint32_t   pctpid;             /**<   Parse Internal Memory Configured TPID Register */
-+} t_FmPortPrsRegs;
-+
-+/**************************************************************************//*
-+ @Description   Basic buffer descriptor (BD) structure
-+*//***************************************************************************/
-+typedef _Packed struct
-+{
-+    volatile uint16_t       status;
-+    volatile uint16_t       length;
-+    volatile uint8_t        reserved0[0x6];
-+    volatile uint8_t        reserved1[0x1];
-+    volatile t_FmPhysAddr   buff;
-+} _PackedType t_FmImBd;
-+
-+typedef _Packed struct
-+{
-+    volatile uint16_t       gen;                /**< tbd */
-+    volatile uint8_t        reserved0[0x1];
-+    volatile t_FmPhysAddr   bdRingBase;         /**< tbd */
-+    volatile uint16_t       bdRingSize;         /**< tbd */
-+    volatile uint16_t       offsetIn;           /**< tbd */
-+    volatile uint16_t       offsetOut;          /**< tbd */
-+    volatile uint8_t        reserved1[0x12];    /**< 0x0e - 0x1f */
-+} _PackedType t_FmPortImQd;
-+
-+typedef _Packed struct
-+{
-+    volatile uint32_t   mode;               /**< Mode register */
-+    volatile uint32_t   rxQdPtr;            /**< tbd */
-+    volatile uint32_t   txQdPtr;            /**< tbd */
-+    volatile uint16_t   mrblr;              /**< tbd */
-+    volatile uint16_t   rxQdBsyCnt;         /**< tbd */
-+    volatile uint8_t    reserved0[0x10];    /**< 0x10 - 0x1f */
-+    t_FmPortImQd        rxQd;
-+    t_FmPortImQd        txQd;
-+    volatile uint8_t    reserved1[0xa0];    /**< 0x60 - 0xff */
-+} _PackedType t_FmPortImPram;
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+
-+/**************************************************************************//**
-+ @Description       Registers bit fields
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description       BMI defines
-+*//***************************************************************************/
-+#if (DPAA_VERSION >= 11)
-+#define BMI_SP_ID_MASK                          0xff000000
-+#define BMI_SP_ID_SHIFT                         24
-+#define BMI_SP_EN                               0x01000000
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+#define BMI_PORT_CFG_EN                         0x80000000
-+#define BMI_PORT_CFG_EN_MACSEC                  0x00800000
-+#define BMI_PORT_CFG_FDOVR                      0x02000000
-+#define BMI_PORT_CFG_IM                         0x01000000
-+#define BMI_PORT_CFG_AM                         0x00000040
-+#define BMI_PORT_STATUS_BSY                     0x80000000
-+#define BMI_COUNTERS_EN                         0x80000000
-+
-+#define BMI_PORT_RFNE_FRWD_DCL4C                0x10000000
-+#define BMI_PORT_RFNE_FRWD_RPD                  0x40000000
-+#define BMI_RFNE_FDCS_MASK                      0xFF000000
-+#define BMI_RFNE_HXS_MASK                       0x000000FF
-+
-+#define BMI_CMD_MR_LEAC                         0x00200000
-+#define BMI_CMD_MR_SLEAC                        0x00100000
-+#define BMI_CMD_MR_MA                           0x00080000
-+#define BMI_CMD_MR_DEAS                         0x00040000
-+#define BMI_CMD_RX_MR_DEF                       (BMI_CMD_MR_LEAC | \
-+                                                 BMI_CMD_MR_SLEAC | \
-+                                                 BMI_CMD_MR_MA | \
-+                                                 BMI_CMD_MR_DEAS)
-+#define BMI_CMD_ATTR_ORDER                      0x80000000
-+#define BMI_CMD_ATTR_SYNC                       0x02000000
-+#define BMI_CMD_ATTR_MODE_MISS_ALLIGN_ADDR_EN   0x00080000
-+#define BMI_CMD_ATTR_MACCMD_MASK                0x0000ff00
-+#define BMI_CMD_ATTR_MACCMD_OVERRIDE            0x00008000
-+#define BMI_CMD_ATTR_MACCMD_SECURED             0x00001000
-+#define BMI_CMD_ATTR_MACCMD_SC_MASK             0x00000f00
-+
-+#define BMI_EXT_BUF_POOL_ID_MASK                0x003F0000
-+#define BMI_STATUS_RX_MASK_UNUSED               (uint32_t)(~(FM_PORT_FRM_ERR_DMA                    | \
-+                                                             FM_PORT_FRM_ERR_PHYSICAL               | \
-+                                                             FM_PORT_FRM_ERR_SIZE                   | \
-+                                                             FM_PORT_FRM_ERR_CLS_DISCARD            | \
-+                                                             FM_PORT_FRM_ERR_EXTRACTION             | \
-+                                                             FM_PORT_FRM_ERR_NO_SCHEME              | \
-+                                                             FM_PORT_FRM_ERR_COLOR_RED              | \
-+                                                             FM_PORT_FRM_ERR_COLOR_YELLOW           | \
-+                                                             FM_PORT_FRM_ERR_ILL_PLCR               | \
-+                                                             FM_PORT_FRM_ERR_PLCR_FRAME_LEN         | \
-+                                                             FM_PORT_FRM_ERR_PRS_TIMEOUT            | \
-+                                                             FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT       | \
-+                                                             FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED   | \
-+                                                             FM_PORT_FRM_ERR_PRS_HDR_ERR            | \
-+                                                             FM_PORT_FRM_ERR_IPRE                   | \
-+                                                             FM_PORT_FRM_ERR_IPR_NCSP               | \
-+                                                             FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW))
-+
-+#define BMI_STATUS_OP_MASK_UNUSED               (uint32_t)(BMI_STATUS_RX_MASK_UNUSED &                \
-+                                                           ~(FM_PORT_FRM_ERR_LENGTH                 | \
-+                                                             FM_PORT_FRM_ERR_NON_FM                 | \
-+                                                             FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT))
-+
-+#define BMI_RATE_LIMIT_EN                       0x80000000
-+#define BMI_RATE_LIMIT_BURST_SIZE_GRAN          0x80000000
-+#define BMI_RATE_LIMIT_SCALE_BY_2               0x00000001
-+#define BMI_RATE_LIMIT_SCALE_BY_4               0x00000002
-+#define BMI_RATE_LIMIT_SCALE_BY_8               0x00000003
-+
-+#define BMI_RX_FIFO_THRESHOLD_BC                0x80000000
-+
-+#define BMI_PRS_RESULT_HIGH                     0x00000000
-+#define BMI_PRS_RESULT_LOW                      0xFFFFFFFF
-+
-+
-+#define RX_ERRS_TO_ENQ                          (FM_PORT_FRM_ERR_DMA                    | \
-+                                                 FM_PORT_FRM_ERR_PHYSICAL               | \
-+                                                 FM_PORT_FRM_ERR_SIZE                   | \
-+                                                 FM_PORT_FRM_ERR_EXTRACTION             | \
-+                                                 FM_PORT_FRM_ERR_NO_SCHEME              | \
-+                                                 FM_PORT_FRM_ERR_ILL_PLCR               | \
-+                                                 FM_PORT_FRM_ERR_PLCR_FRAME_LEN         | \
-+                                                 FM_PORT_FRM_ERR_PRS_TIMEOUT            | \
-+                                                 FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT       | \
-+                                                 FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED   | \
-+                                                 FM_PORT_FRM_ERR_PRS_HDR_ERR            | \
-+                                                 FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW       | \
-+                                                 FM_PORT_FRM_ERR_IPRE)
-+
-+#define OP_ERRS_TO_ENQ                          (RX_ERRS_TO_ENQ                         | \
-+                                                 FM_PORT_FRM_ERR_LENGTH                 | \
-+                                                 FM_PORT_FRM_ERR_NON_FM                 | \
-+                                                 FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT)
-+
-+
-+#define BMI_RX_FIFO_PRI_ELEVATION_MASK          0x03FF0000
-+#define BMI_RX_FIFO_THRESHOLD_MASK              0x000003FF
-+#define BMI_TX_FIFO_MIN_FILL_MASK               0x03FF0000
-+#define BMI_FIFO_PIPELINE_DEPTH_MASK            0x0000F000
-+#define BMI_TX_LOW_COMF_MASK                    0x000003FF
-+
-+/* shifts */
-+#define BMI_PORT_CFG_MS_SEL_SHIFT               16
-+#define BMI_DMA_ATTR_IC_CACHE_SHIFT             FMAN_SP_DMA_ATTR_IC_CACHE_SHIFT
-+#define BMI_DMA_ATTR_HDR_CACHE_SHIFT            FMAN_SP_DMA_ATTR_HDR_CACHE_SHIFT
-+#define BMI_DMA_ATTR_SG_CACHE_SHIFT             FMAN_SP_DMA_ATTR_SG_CACHE_SHIFT
-+
-+#define BMI_IM_FOF_SHIFT                        28
-+#define BMI_PR_PORTID_SHIFT                     24
-+
-+#define BMI_RX_FIFO_PRI_ELEVATION_SHIFT         16
-+#define BMI_RX_FIFO_THRESHOLD_SHIFT             0
-+
-+#define BMI_RX_FRAME_END_CS_IGNORE_SHIFT        24
-+#define BMI_RX_FRAME_END_CUT_SHIFT              16
-+
-+#define BMI_IC_SIZE_SHIFT                       FMAN_SP_IC_SIZE_SHIFT
-+
-+#define BMI_INT_BUF_MARG_SHIFT                  28
-+
-+#define BMI_EXT_BUF_MARG_END_SHIFT              FMAN_SP_EXT_BUF_MARG_END_SHIFT
-+
-+#define BMI_CMD_ATTR_COLOR_SHIFT                26
-+#define BMI_CMD_ATTR_COM_MODE_SHIFT             16
-+#define BMI_CMD_ATTR_MACCMD_SHIFT               8
-+#define BMI_CMD_ATTR_MACCMD_OVERRIDE_SHIFT      15
-+#define BMI_CMD_ATTR_MACCMD_SECURED_SHIFT       12
-+#define BMI_CMD_ATTR_MACCMD_SC_SHIFT            8
-+
-+#define BMI_POOL_DEP_NUM_OF_POOLS_VECTOR_SHIFT  24
-+
-+#define BMI_TX_FIFO_MIN_FILL_SHIFT              16
-+#define BMI_TX_LOW_COMF_SHIFT                   0
-+
-+#define BMI_PERFORMANCE_TASK_COMP_SHIFT         24
-+#define BMI_PERFORMANCE_PORT_COMP_SHIFT         16
-+#define BMI_PERFORMANCE_DMA_COMP_SHIFT          12
-+#define BMI_PERFORMANCE_FIFO_COMP_SHIFT         0
-+
-+#define BMI_MAX_BURST_SHIFT                     16
-+#define BMI_COUNT_RATE_UNIT_SHIFT               16
-+
-+/* sizes */
-+#define FRAME_END_DATA_SIZE                     16
-+#define FRAME_OFFSET_UNITS                      16
-+#define MIN_TX_INT_OFFSET                       16
-+#define MAX_FRAME_OFFSET                        64
-+#define MAX_FIFO_PIPELINE_DEPTH                 8
-+#define MAX_PERFORMANCE_TASK_COMP               64
-+#define MAX_PERFORMANCE_TX_QUEUE_COMP           8
-+#define MAX_PERFORMANCE_RX_QUEUE_COMP           64
-+#define MAX_PERFORMANCE_DMA_COMP                16
-+#define MAX_NUM_OF_TASKS                        64
-+#define MAX_NUM_OF_EXTRA_TASKS                  8
-+#define MAX_NUM_OF_DMAS                         16
-+#define MAX_NUM_OF_EXTRA_DMAS                   8
-+#define MAX_BURST_SIZE                          1024
-+#define MIN_NUM_OF_OP_DMAS                      2
-+
-+
-+/**************************************************************************//**
-+ @Description       QMI defines
-+*//***************************************************************************/
-+/* masks */
-+#define QMI_PORT_CFG_EN                         0x80000000
-+#define QMI_PORT_CFG_EN_COUNTERS                0x10000000
-+#define QMI_PORT_STATUS_DEQ_TNUM_BSY            0x80000000
-+#define QMI_PORT_STATUS_DEQ_FD_BSY              0x20000000
-+
-+#define QMI_DEQ_CFG_PREFETCH_NO_TNUM            0x02000000
-+#define QMI_DEQ_CFG_PREFETCH_WAITING_TNUM       0
-+#define QMI_DEQ_CFG_PREFETCH_1_FRAME            0
-+#define QMI_DEQ_CFG_PREFETCH_3_FRAMES           0x01000000
-+
-+#define QMI_DEQ_CFG_PRI                         0x80000000
-+#define QMI_DEQ_CFG_TYPE1                       0x10000000
-+#define QMI_DEQ_CFG_TYPE2                       0x20000000
-+#define QMI_DEQ_CFG_TYPE3                       0x30000000
-+
-+#define QMI_DEQ_CFG_SUBPORTAL_MASK              0x1f
-+#define QMI_DEQ_CFG_SUBPORTAL_SHIFT             20
-+
-+/**************************************************************************//**
-+ @Description       PARSER defines
-+*//***************************************************************************/
-+/* masks */
-+#define PRS_HDR_ERROR_DIS                       0x00000800
-+#define PRS_HDR_SW_PRS_EN                       0x00000400
-+#define PRS_CP_OFFSET_MASK                      0x0000000F
-+#define PRS_TPID1_MASK                          0xFFFF0000
-+#define PRS_TPID2_MASK                          0x0000FFFF
-+#define PRS_TPID_DFLT                           0x91009100
-+
-+#define PRS_HDR_MPLS_LBL_INTER_EN               0x00200000
-+#define PRS_HDR_IPV6_ROUTE_HDR_EN               0x00008000
-+#define PRS_HDR_PPPOE_MTU_CHECK_EN              0x80000000
-+#define PRS_HDR_UDP_PAD_REMOVAL                 0x80000000
-+#define PRS_HDR_TCP_PAD_REMOVAL                 0x80000000
-+#define PRS_CAC_STOP                            0x00000001
-+#define PRS_CAC_ACTIVE                          0x00000100
-+
-+/* shifts */
-+#define PRS_PCTPID_SHIFT                        16
-+#define PRS_HDR_MPLS_NEXT_HDR_SHIFT             22
-+#define PRS_HDR_ETH_BC_SHIFT                    28
-+#define PRS_HDR_ETH_MC_SHIFT                    24
-+#define PRS_HDR_VLAN_STACKED_SHIFT              16
-+#define PRS_HDR_MPLS_STACKED_SHIFT              16
-+#define PRS_HDR_IPV4_1_BC_SHIFT                 28
-+#define PRS_HDR_IPV4_1_MC_SHIFT                 24
-+#define PRS_HDR_IPV4_2_UC_SHIFT                 20
-+#define PRS_HDR_IPV4_2_MC_BC_SHIFT              16
-+#define PRS_HDR_IPV6_1_MC_SHIFT                 24
-+#define PRS_HDR_IPV6_2_UC_SHIFT                 20
-+#define PRS_HDR_IPV6_2_MC_SHIFT                 16
-+
-+#define PRS_HDR_ETH_BC_MASK                     0x0fffffff
-+#define PRS_HDR_ETH_MC_MASK                     0xf0ffffff
-+#define PRS_HDR_VLAN_STACKED_MASK               0xfff0ffff
-+#define PRS_HDR_MPLS_STACKED_MASK               0xfff0ffff
-+#define PRS_HDR_IPV4_1_BC_MASK                  0x0fffffff
-+#define PRS_HDR_IPV4_1_MC_MASK                  0xf0ffffff
-+#define PRS_HDR_IPV4_2_UC_MASK                  0xff0fffff
-+#define PRS_HDR_IPV4_2_MC_BC_MASK               0xfff0ffff
-+#define PRS_HDR_IPV6_1_MC_MASK                  0xf0ffffff
-+#define PRS_HDR_IPV6_2_UC_MASK                  0xff0fffff
-+#define PRS_HDR_IPV6_2_MC_MASK                  0xfff0ffff
-+
-+/* others */
-+#define PRS_HDR_ENTRY_SIZE                      8
-+#define DEFAULT_CLS_PLAN_VECTOR                 0xFFFFFFFF
-+
-+#define IPSEC_SW_PATCH_START                    0x20
-+#define SCTP_SW_PATCH_START                     0x4D
-+#define DCCP_SW_PATCH_START                     0x41
-+
-+/**************************************************************************//**
-+ @Description       IM defines
-+*//***************************************************************************/
-+#define BD_R_E                                  0x80000000
-+#define BD_L                                    0x08000000
-+
-+#define BD_RX_CRE                               0x00080000
-+#define BD_RX_FTL                               0x00040000
-+#define BD_RX_FTS                               0x00020000
-+#define BD_RX_OV                                0x00010000
-+
-+#define BD_RX_ERRORS                            (BD_RX_CRE | BD_RX_FTL | BD_RX_FTS | BD_RX_OV)
-+
-+#define FM_IM_SIZEOF_BD                         sizeof(t_FmImBd)
-+
-+#define BD_STATUS_MASK                          0xffff0000
-+#define BD_LENGTH_MASK                          0x0000ffff
-+
-+#define BD_STATUS_AND_LENGTH_SET(bd, val)       WRITE_UINT32(*(volatile uint32_t*)(bd), (val))
-+
-+#define BD_STATUS_AND_LENGTH(bd)                GET_UINT32(*(volatile uint32_t*)(bd))
-+
-+#define BD_GET(id)                              &p_FmPort->im.p_BdRing[id]
-+
-+#define IM_ILEGAL_BD_ID                         0xffff
-+
-+/* others */
-+#define IM_PRAM_ALIGN                           0x100
-+
-+/* masks */
-+#define IM_MODE_GBL                             0x20000000
-+#define IM_MODE_BO_MASK                         0x18000000
-+#define IM_MODE_BO_SHIFT                        3
-+#define IM_MODE_GRC_STP                         0x00800000
-+
-+#define IM_MODE_SET_BO(val)                     (uint32_t)((val << (31-IM_MODE_BO_SHIFT)) & IM_MODE_BO_MASK)
-+
-+#define IM_RXQD_BSYINTM                         0x0008
-+#define IM_RXQD_RXFINTM                         0x0010
-+#define IM_RXQD_FPMEVT_SEL_MASK                 0x0003
-+
-+#define IM_EV_BSY                               0x40000000
-+#define IM_EV_RX                                0x80000000
-+
-+
-+/**************************************************************************//**
-+ @Description       Additional defines
-+*//***************************************************************************/
-+
-+typedef struct {
-+    t_Handle                    h_FmMuram;
-+    t_FmPortImPram              *p_FmPortImPram;
-+    uint8_t                     fwExtStructsMemId;
-+    uint32_t                    fwExtStructsMemAttr;
-+    uint16_t                    bdRingSize;
-+    t_FmImBd                    *p_BdRing;
-+    t_Handle                    *p_BdShadow;
-+    uint16_t                    currBdId;
-+    uint16_t                    firstBdOfFrameId;
-+
-+    /* Rx port parameters */
-+    uint8_t                     dataMemId;          /**< Memory partition ID for data buffers */
-+    uint32_t                    dataMemAttributes;  /**< Memory attributes for data buffers */
-+    t_BufferPoolInfo            rxPool;
-+    uint16_t                    mrblr;
-+    uint16_t                    rxFrameAccumLength;
-+    t_FmPortImRxStoreCallback   *f_RxStore;
-+
-+    /* Tx port parameters */
-+    uint32_t                    txFirstBdStatus;
-+    t_FmPortImTxConfCallback    *f_TxConf;
-+} t_FmMacIm;
-+
-+
-+typedef struct {
-+    struct fman_port_cfg                dfltCfg;
-+    uint32_t                            dfltFqid;
-+    uint32_t                            confFqid;
-+    uint32_t                            errFqid;
-+    uintptr_t                           baseAddr;
-+    uint8_t                             deqSubPortal;
-+    bool                                deqHighPriority;
-+    e_FmPortDeqType                     deqType;
-+    e_FmPortDeqPrefetchOption           deqPrefetchOption;
-+    uint16_t                            deqByteCnt;
-+    uint8_t                             cheksumLastBytesIgnore;
-+    uint8_t                             cutBytesFromEnd;
-+    t_FmBufPoolDepletion                bufPoolDepletion;
-+    uint8_t                             pipelineDepth;
-+    uint16_t                            fifoLowComfLevel;
-+    bool                                frmDiscardOverride;
-+    bool                                enRateLimit;
-+    t_FmPortRateLimit                   rateLimit;
-+    e_FmPortDualRateLimiterScaleDown    rateLimitDivider;
-+    bool                                enBufPoolDepletion;
-+    uint16_t                            liodnOffset;
-+    uint16_t                            liodnBase;
-+    t_FmExtPools                        extBufPools;
-+    e_FmDmaSwapOption                   dmaSwapData;
-+    e_FmDmaCacheOption                  dmaIntContextCacheAttr;
-+    e_FmDmaCacheOption                  dmaHeaderCacheAttr;
-+    e_FmDmaCacheOption                  dmaScatterGatherCacheAttr;
-+    bool                                dmaReadOptimize;
-+    bool                                dmaWriteOptimize;
-+    uint32_t                            txFifoMinFillLevel;
-+    uint32_t                            txFifoLowComfLevel;
-+    uint32_t                            rxFifoPriElevationLevel;
-+    uint32_t                            rxFifoThreshold;
-+    t_FmSpBufMargins                    bufMargins;
-+    t_FmSpIntContextDataCopy            intContext;
-+    bool                                syncReq;
-+    e_FmPortColor                       color;
-+    fmPortFrameErrSelect_t              errorsToDiscard;
-+    fmPortFrameErrSelect_t              errorsToEnq;
-+    bool                                forwardReuseIntContext;
-+    t_FmBufferPrefixContent             bufferPrefixContent;
-+     t_FmBackupBmPools                   *p_BackupBmPools;
-+    bool                                dontReleaseBuf;
-+    bool                                setNumOfTasks;
-+    bool                                setNumOfOpenDmas;
-+    bool                                setSizeOfFifo;
-+#if (DPAA_VERSION >= 11)
-+    bool                                noScatherGather;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+#ifdef FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669
-+    bool                                bcbWorkaround;
-+#endif /* FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669 */
-+} t_FmPortDriverParam;
-+
-+
-+typedef struct t_FmPortRxPoolsParams
-+{
-+    uint8_t     numOfPools;
-+    uint16_t    secondLargestBufSize;
-+    uint16_t    largestBufSize;
-+} t_FmPortRxPoolsParams;
-+
-+typedef struct t_FmPortDsarVars {
-+    t_Handle                    *autoResOffsets;
-+    t_FmPortDsarTablesSizes     *autoResMaxSizes;
-+    uint32_t                    fmbm_tcfg;
-+    uint32_t                    fmbm_tcmne;
-+    uint32_t                    fmbm_rfne;
-+    uint32_t                    fmbm_rfpne;
-+    uint32_t                    fmbm_rcfg;
-+    bool                        dsarEnabledParser;
-+} t_FmPortDsarVars;
-+typedef struct {
-+    struct fman_port            port;
-+    t_Handle                    h_Fm;
-+    t_Handle                    h_FmPcd;
-+    t_Handle                    h_FmMuram;
-+    t_FmRevisionInfo            fmRevInfo;
-+    uint8_t                     portId;
-+    e_FmPortType                portType;
-+    int                         enabled;
-+    char                        name[MODULE_NAME_SIZE];
-+    uint8_t                     hardwarePortId;
-+    uint16_t                    fmClkFreq;
-+    t_FmPortQmiRegs             *p_FmPortQmiRegs;
-+    u_FmPortBmiRegs             *p_FmPortBmiRegs;
-+    t_FmPortPrsRegs             *p_FmPortPrsRegs;
-+    fmPcdEngines_t              pcdEngines;
-+    uint32_t                    savedBmiNia;
-+    uint8_t                     netEnvId;
-+    uint32_t                    optArray[FM_PCD_MAX_NUM_OF_OPTIONS(FM_PCD_MAX_NUM_OF_CLS_PLANS)];
-+    uint32_t                    lcvs[FM_PCD_PRS_NUM_OF_HDRS];
-+    uint8_t                     privateInfo;
-+    uint32_t                    schemesPerPortVector;
-+    bool                        useClsPlan;
-+    uint8_t                     clsPlanGrpId;
-+    t_Handle                    ccTreeId;
-+    t_Handle                    completeArg;
-+    void                        (*f_Complete)(t_Handle arg);
-+    t_FmSpBufferOffsets         bufferOffsets;
-+    /* Independent-Mode parameters support */
-+    bool                        imEn;
-+    t_FmMacIm                   im;
-+    volatile bool               lock;
-+    t_Handle                    h_Spinlock;
-+    t_FmPortExceptionCallback   *f_Exception;
-+    t_Handle                    h_App;
-+    uint8_t                     internalBufferOffset;
-+    uint8_t                     fmanCtrlEventId;
-+    uint32_t                    exceptions;
-+    bool                        polling;
-+    t_FmExtPools                extBufPools;
-+    uint32_t                    requiredAction;
-+    uint32_t                    savedQmiPnen;
-+    uint32_t                    savedBmiFene;
-+    uint32_t                    savedBmiFpne;
-+    uint32_t                    savedBmiCmne;
-+    uint32_t                    savedBmiOfp;
-+    uint32_t                    savedNonRxQmiRegsPndn;
-+    uint32_t                    origNonRxQmiRegsPndn;
-+    int                         savedPrsStartOffset;
-+    bool                        includeInPrsStatistics;
-+    uint16_t                    maxFrameLength;
-+    t_FmFmanCtrl                orFmanCtrl;
-+    t_FmPortRsrc                openDmas;
-+    t_FmPortRsrc                tasks;
-+    t_FmPortRsrc                fifoBufs;
-+    t_FmPortRxPoolsParams       rxPoolsParams;
-+//    bool                        explicitUserSizeOfFifo;
-+    t_Handle                    h_IpReassemblyManip;
-+    t_Handle                    h_CapwapReassemblyManip;
-+    t_Handle                    h_ReassemblyTree;
-+    uint64_t                    fmMuramPhysBaseAddr;
-+#if (DPAA_VERSION >= 11)
-+    bool                        vspe;
-+    uint8_t                     dfltRelativeId;
-+    e_FmPortGprFuncType         gprFunc;
-+    t_FmPcdCtrlParamsPage       *p_ParamsPage;
-+#endif /* (DPAA_VERSION >= 11) */
-+    t_FmPortDsarVars            deepSleepVars;
-+    t_FmPortDriverParam         *p_FmPortDriverParam;
-+} t_FmPort;
-+
-+
-+void FmPortConfigIM (t_FmPort *p_FmPort, t_FmPortParams *p_FmPortParams);
-+t_Error FmPortImCheckInitParameters(t_FmPort *p_FmPort);
-+
-+t_Error FmPortImInit(t_FmPort *p_FmPort);
-+void    FmPortImFree(t_FmPort *p_FmPort);
-+
-+t_Error FmPortImEnable  (t_FmPort *p_FmPort);
-+t_Error FmPortImDisable (t_FmPort *p_FmPort);
-+t_Error FmPortImRx      (t_FmPort *p_FmPort);
-+
-+void    FmPortSetMacsecLcv(t_Handle h_FmPort);
-+void    FmPortSetMacsecCmd(t_Handle h_FmPort, uint8_t dfltSci);
-+
-+
-+t_Error FM_PORT_SetNumOfOpenDmas(t_Handle h_FmPort, t_FmPortRsrc *p_NumOfOpenDmas);
-+t_Error FM_PORT_SetNumOfTasks(t_Handle h_FmPort, t_FmPortRsrc *p_NumOfTasks);
-+t_Error FM_PORT_SetSizeOfFifo(t_Handle h_FmPort, t_FmPortRsrc *p_SizeOfFifo);
-+
-+static __inline__ uint8_t * BdBufferGet (t_PhysToVirt *f_PhysToVirt, t_FmImBd *p_Bd)
-+{
-+    uint64_t    physAddr = (uint64_t)((uint64_t)GET_UINT8(p_Bd->buff.high) << 32);
-+    physAddr |= GET_UINT32(p_Bd->buff.low);
-+
-+    return (uint8_t *)f_PhysToVirt((physAddress_t)(physAddr));
-+}
-+
-+static __inline__ void SET_ADDR(volatile t_FmPhysAddr *fmPhysAddr, uint64_t value)
-+{
-+    WRITE_UINT8(fmPhysAddr->high,(uint8_t)((value & 0x000000ff00000000LL) >> 32));
-+    WRITE_UINT32(fmPhysAddr->low,(uint32_t)value);
-+}
-+
-+static __inline__ void BdBufferSet(t_VirtToPhys *f_VirtToPhys, t_FmImBd *p_Bd, uint8_t *p_Buffer)
-+{
-+    uint64_t    physAddr = (uint64_t)(f_VirtToPhys(p_Buffer));
-+    SET_ADDR(&p_Bd->buff, physAddr);
-+}
-+
-+static __inline__ uint16_t GetNextBdId(t_FmPort *p_FmPort, uint16_t id)
-+{
-+    if (id < p_FmPort->im.bdRingSize-1)
-+        return (uint16_t)(id+1);
-+    else
-+        return 0;
-+}
-+
-+void FM_PORT_Dsar_DumpRegs(void);
-+
-+
-+#endif /* __FM_PORT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port_dsar.h
-@@ -0,0 +1,494 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**************************************************************************//**
-+ @File          fm_port_dsar.h
-+
-+ @Description   Deep Sleep Auto Response project - common module header file.               
-+
-+                Author - Eyal Harari
-+                
-+ @Cautions      See the FMan Controller spec and design document for more information.
-+*//***************************************************************************/
-+
-+#ifndef __FM_PORT_DSAR_H_
-+#define __FM_PORT_DSAR_H_
-+
-+#define DSAR_GETSER_MASK 0xFF0000FF
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(push,1)
-+#endif /* defined(__MWERKS__) && ... */ 
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response VLAN-IPv4 Binding Table (for ARP/ICMPv4)
-+                Refer to the FMan Controller spec for more details.
-+*//***************************************************************************/
-+typedef _Packed struct
-+{
-+        uint32_t ipv4Addr; /*!< 32 bit IPv4 Address. */
-+        uint16_t vlanId;   /*!< 12 bits VLAN ID. The 4 left-most bits should be cleared                      */
-+					   /*!< This field should be 0x0000 for an entry with no VLAN tag or a null VLAN ID. */
-+        uint16_t reserved;
-+} _PackedType t_DsarArpBindingEntry;
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response Address Resolution Protocol Statistics Descriptor
-+                Refer to the FMan Controller spec for more details.
-+	            0x00 INVAL_CNT Invalid ARP IPv4-Ethernet counter
-+	            0x04 ECHO_CNT Echo counter
-+	            0x08 CD_CNT Conflict Detection counter
-+	            0x0C AR_CNT Auto-Response counter
-+	            0x10 RATM_CNT Replies Addressed To Me counter
-+	            0x14 UKOP_CNT Unknown Operation counter
-+	            0x18 NMTP_CNT Not my TPA counter
-+	            0x1C NMVLAN_CNT Not My VLAN counter
-+*//***************************************************************************/
-+typedef _Packed struct
-+{
-+    uint32_t invalCnt;	/**< Invalid ARP IPv4-Ethernet counter. */
-+    uint32_t echoCnt;	/**< Echo counter. 						*/
-+    uint32_t cdCnt;		/**< Conflict Detection counter.		*/
-+    uint32_t arCnt;		/**< Auto-Response counter.				*/
-+    uint32_t ratmCnt;	/**< Replies Addressed To Me counter.	*/
-+    uint32_t ukopCnt;	/**< Unknown Operation counter.			*/
-+    uint32_t nmtpCnt;	/**< Not my TPA counter.				*/
-+    uint32_t nmVlanCnt; /**< Not My VLAN counter				*/
-+} _PackedType t_DsarArpStatistics;
-+
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response Address Resolution Protocol Descriptor
-+                0x0 0-15 Control bits [0-15]. Bit 15  = CDEN.
-+                0x2 0-15 NumOfBindings Number of entries in the binding list.
-+                0x4 0-15 BindingsPointer Bindings Pointer. This points to an IPv4-MAC Addresses Bindings list.
-+                0x6 0-15
-+                0x8 0-15 StatisticsPointer Statistics Pointer. This field points to the ARP Descriptors statistics data structure.
-+                0xA 0-15
-+                0xC 0-15 Reserved Reserved. Must be cleared.
-+                0xE 015
-+
-+*//***************************************************************************/
-+typedef _Packed struct
-+{
-+    uint16_t control;                       /** Control bits [0-15]. Bit 15  = CDEN */
-+    uint16_t numOfBindings;                 /**< Number of VLAN-IPv4 */
-+    uint32_t p_Bindings;	/**< VLAN-IPv4 Bindings table pointer. */
-+    uint32_t p_Statistics;   /**< Statistics Data Structure pointer. */
-+    uint32_t reserved1;                     /**< Reserved. */
-+} _PackedType t_DsarArpDescriptor;
-+
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response VLAN-IPv4 Binding Table (for ARP/ICMPv4)
-+                Refer to the FMan Controller spec for more details.
-+*//***************************************************************************/
-+typedef _Packed struct 
-+{
-+    uint32_t ipv4Addr; /*!< 32 bit IPv4 Address. */
-+	uint16_t vlanId;   /*!< 12 bits VLAN ID. The 4 left-most bits should be cleared                      */
-+					   /*!< This field should be 0x0000 for an entry with no VLAN tag or a null VLAN ID. */
-+	uint16_t reserved;
-+} _PackedType t_DsarIcmpV4BindingEntry;
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response ICMPv4 Statistics Descriptor
-+                Refer to the FMan Controller spec for more details.
-+                0x00 INVAL_CNT Invalid ICMPv4 header counter
-+                0x04 NMVLAN_CNT Not My VLAN counter
-+                0x08 NMIP_CNT Not My IP counter
-+                0x0C AR_CNT Auto-Response counter
-+                0x10 CSERR_CNT Checksum Error counter
-+                0x14 Reserved Reserved
-+                0x18 Reserved Reserved
-+                0x1C Reserved Reserved
-+
-+*//***************************************************************************/
-+typedef _Packed struct
-+{
-+    uint32_t invalCnt;	/**< Invalid ICMPv4 Echo counter. */
-+    uint32_t nmVlanCnt;	/**< Not My VLAN counter          */
-+    uint32_t nmIpCnt;	/**< Not My IP counter		      */
-+    uint32_t arCnt;		/**< Auto-Response counter        */
-+    uint32_t cserrCnt;	/**< Checksum Error counter       */
-+    uint32_t reserved0;	/**< Reserved                     */
-+    uint32_t reserved1;	/**< Reserved                     */
-+    uint32_t reserved2; /**< Reserved                     */
-+} _PackedType t_DsarIcmpV4Statistics;
-+
-+
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response ICMPv4 Descriptor
-+                0x0 0-15 Control bits [0-15]
-+                0x2 0-15 NumOfBindings Number of entries in the binding list.
-+                0x4 0-15 BindingsPointer Bindings Pointer. This points to an VLAN-IPv4 Addresses Bindings list.
-+                0x6 0-15
-+                0x8 0-15 StatisticsPointer Statistics Pointer. This field points to the ICMPv4 statistics data structure.
-+                0xA 0-15
-+                0xC 0-15 Reserved Reserved. Must be cleared.
-+                0xE 015
-+
-+*//***************************************************************************/
-+typedef _Packed struct
-+{
-+    uint16_t control;                       /** Control bits [0-15].                */
-+    uint16_t numOfBindings;                 /**< Number of VLAN-IPv4                */
-+    uint32_t p_Bindings;	/**< VLAN-IPv4 Bindings table pointer.  */
-+    uint32_t p_Statistics;   /**< Statistics Data Structure pointer. */
-+    uint32_t reserved1;                     /**< Reserved.                          */
-+} _PackedType t_DsarIcmpV4Descriptor;
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response VLAN-IPv4 Binding Table (for ARP/ICMPv4)
-+                The 4 left-most bits (15:12) of the VlanId parameter are control flags.
-+                Flags[3:1] (VlanId[15:13]): Reserved, should be cleared.
-+                Flags[0] (VlanId[12]): Temporary address.
-+                • 0 - Assigned IP address.
-+                • 1- Temporary (tentative) IP address.
-+                Refer to the FMan Controller spec for more details.
-+*//***************************************************************************/
-+typedef _Packed struct 
-+{
-+    uint32_t ipv6Addr[4];  /*!< 3 * 32 bit IPv4 Address.                                                    */
-+	uint16_t resFlags:4;   /*!< reserved flags. should be cleared                                           */
-+	uint16_t vlanId:12;    /*!< 12 bits VLAN ID.                                                            */
-+					       /*!< This field should be 0x000 for an entry with no VLAN tag or a null VLAN ID. */
-+	uint16_t reserved;
-+} _PackedType t_DsarIcmpV6BindingEntry;
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response ICMPv4 Statistics Descriptor
-+                Refer to the FMan Controller spec for more details.
-+                0x00 INVAL_CNT Invalid ICMPv4 header counter
-+                0x04 NMVLAN_CNT Not My VLAN counter
-+                0x08 NMIP_CNT Not My IP counter
-+                0x0C AR_CNT Auto-Response counter
-+                0x10 CSERR_CNT Checksum Error counter
-+                0x14 MCAST_CNT Multicast counter
-+                0x18 Reserved Reserved
-+                0x1C Reserved Reserved
-+
-+*//***************************************************************************/
-+typedef _Packed struct
-+{
-+    uint32_t invalCnt;	/**< Invalid ICMPv4 Echo counter. */
-+    uint32_t nmVlanCnt;	/**< Not My VLAN counter          */
-+    uint32_t nmIpCnt;	/**< Not My IP counter		      */
-+    uint32_t arCnt;		/**< Auto-Response counter        */
-+    uint32_t reserved1;	/**< Reserved                     */
-+    uint32_t reserved2; /**< Reserved                     */
-+    uint32_t reserved3;	/**< Reserved                     */
-+    uint32_t reserved4; /**< Reserved                     */
-+} _PackedType t_DsarIcmpV6Statistics;
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response Neighbor Discovery Statistics Descriptor
-+                0x00 INVAL_CNT Invalid Neighbor Discovery message counter
-+                0x04 NMVLAN_CNT Not My VLAN counter
-+                0x08 NMIP_CNT Not My IP counter
-+                0x0C AR_CNT Auto-Response counter
-+                0x10 CSERR_CNT Checksum Error counter
-+                0x14 USADVERT_CNT Unsolicited Neighbor Advertisements counter
-+                0x18 NMMCAST_CNT Not My Multicast group counter
-+                0x1C NSLLA_CNT No Source Link-Layer Address counter. Indicates that there was a match on a Target
-+                     Address of a packet that its source IP address is a unicast address, but the ICMPv6
-+                     Source Link-layer Address option is omitted
-+*//***************************************************************************/
-+typedef _Packed struct
-+{
-+    uint32_t invalCnt;	  /**< Invalid ICMPv4 Echo counter.                */
-+    uint32_t nmVlanCnt;	  /**< Not My VLAN counter                         */
-+    uint32_t nmIpCnt;	  /**< Not My IP counter		                   */
-+    uint32_t arCnt;		  /**< Auto-Response counter                       */
-+    uint32_t reserved1;	  /**< Reserved                                    */
-+    uint32_t usadvertCnt; /**< Unsolicited Neighbor Advertisements counter */
-+    uint32_t nmmcastCnt;  /**< Not My Multicast group counter              */
-+    uint32_t nsllaCnt;    /**< No Source Link-Layer Address counter        */
-+} _PackedType t_NdStatistics;
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response ICMPv6 Descriptor
-+                0x0 0-15 Control bits [0-15]
-+                0x2 0-15 NumOfBindings Number of entries in the binding list.
-+                0x4 0-15 BindingsPointer Bindings Pointer. This points to an VLAN-IPv4 Addresses Bindings list.
-+                0x6 0-15
-+                0x8 0-15 StatisticsPointer Statistics Pointer. This field points to the ICMPv4 statistics data structure.
-+                0xA 0-15
-+                0xC 0-15 Reserved Reserved. Must be cleared.
-+                0xE 015
-+
-+*//***************************************************************************/
-+typedef _Packed struct
-+{
-+    uint16_t control;                       /** Control bits [0-15].                */
-+    uint16_t numOfBindings;                 /**< Number of VLAN-IPv6                */
-+    uint32_t p_Bindings;	/**< VLAN-IPv4 Bindings table pointer.  */
-+    uint32_t p_Statistics;   /**< Statistics Data Structure pointer. */
-+	uint32_t reserved1;                     /**< Reserved.                          */
-+} _PackedType t_DsarIcmpV6Descriptor;
-+
-+
-+/**************************************************************************//**
-+ @Description   Internet Control Message Protocol (ICMPv6) Echo message header
-+                The fields names are taken from RFC 4443.
-+*//***************************************************************************/
-+/* 0                   1                   2                   3     */
-+/* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1   */
-+/* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ */
-+/* |     Type      |     Code      |          Checksum             | */
-+/* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ */
-+/* |           Identifier          |        Sequence Number        | */
-+/* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ */
-+/* |     Data ...                                                    */
-+/* +-+-+-+-+-                                                        */
-+typedef _Packed struct
-+{
-+	uint8_t  type;
-+	uint8_t  code;
-+	uint16_t checksum;
-+	uint16_t identifier;
-+	uint16_t sequenceNumber;
-+} _PackedType t_IcmpV6EchoHdr;
-+
-+/**************************************************************************//**
-+ @Description   Internet Control Message Protocol (ICMPv6) 
-+                Neighbor Solicitation/Advertisement header
-+                The fields names are taken from RFC 4861.
-+                The R/S/O fields are valid for Neighbor Advertisement only
-+*//***************************************************************************/
-+/* 0                   1                   2                   3
-+ * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
-+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-+ * |     Type      |     Code      |          Checksum             |
-+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-+ * |R|S|O|                     Reserved                            |
-+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-+ * |                                                               |
-+ * +                                                               +
-+ * |                                                               |
-+ * +                       Target Address                          +
-+ * |                                                               |
-+ * +                                                               +
-+ * |                                                               |
-+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-+ * |   Options ...
-+ * +-+-+-+-+-+-+-+-+-+-+-+-
-+ *
-+ * Options Format:
-+ * 0                   1                   2                   3
-+ * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
-+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-+ * |     Type      |    Length     |   Link-Layer Address ...      |
-+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-+ * |                  Link-Layer Address                           |
-+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-+*/
-+typedef _Packed struct
-+{
-+	uint8_t  type;
-+	uint8_t  code;
-+	uint16_t checksum;
-+	uint32_t router:1;
-+	uint32_t solicited:1;
-+	uint32_t override:1;
-+	uint32_t reserved:29;
-+	uint32_t targetAddr[4];
-+	uint8_t  optionType;
-+	uint8_t  optionLength;
-+	uint8_t  linkLayerAddr[6];
-+} _PackedType t_IcmpV6NdHdr;
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response ICMPv6 Descriptor
-+                0x0 0-15 Control bits [0-15]
-+                0x2 0-15 NumOfBindings Number of entries in the binding list.
-+                0x4 0-15 BindingsPointer Bindings Pointer. This points to an VLAN-IPv4 Addresses Bindings list.
-+                0x6 0-15
-+                0x8 0-15 StatisticsPointer Statistics Pointer. This field points to the ICMPv4 statistics data structure.
-+                0xA 0-15
-+                0xC 0-15 Reserved Reserved. Must be cleared.
-+                0xE 015
-+
-+*//***************************************************************************/
-+typedef _Packed struct
-+{
-+    uint16_t control;                       /** Control bits [0-15].                    */
-+    uint16_t numOfBindings;                 /**< Number of VLAN-IPv6                    */
-+    uint32_t p_Bindings;	/**< VLAN-IPv4 Bindings table pointer.      */
-+    uint32_t p_Statistics;   /**< Statistics Data Structure pointer.     */
-+	uint32_t solicitedAddr;                 /**< Solicited Node Multicast Group Address */
-+} _PackedType t_DsarNdDescriptor;
-+
-+/**************************************************************************//**
-+@Description    Deep Sleep Auto Response SNMP OIDs table entry
-+                 
-+*//***************************************************************************/
-+typedef struct {
-+    uint16_t oidSize;     /**< Size in octets of the OID. */
-+    uint16_t resSize;     /**< Size in octets of the value that is attached to the OID. */
-+    uint32_t p_Oid;       /**< Pointer to the OID. OID is encoded in BER but type and length are excluded. */
-+    uint32_t resValOrPtr; /**< Value (for up to 4 octets) or pointer to the Value. Encoded in BER. */
-+    uint32_t reserved;
-+} t_OidsTblEntry;
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response SNMP IPv4 Addresses Table Entry
-+                Refer to the FMan Controller spec for more details.
-+*//***************************************************************************/
-+typedef struct
-+{
-+    uint32_t ipv4Addr; /*!< 32 bit IPv4 Address. */
-+    uint16_t vlanId;   /*!< 12 bits VLAN ID. The 4 left-most bits should be cleared                      */
-+                       /*!< This field should be 0x0000 for an entry with no VLAN tag or a null VLAN ID. */
-+    uint16_t reserved;
-+} t_DsarSnmpIpv4AddrTblEntry;
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response SNMP IPv6 Addresses Table Entry
-+                Refer to the FMan Controller spec for more details.
-+*//***************************************************************************/
-+#pragma pack(push,1)
-+typedef struct
-+{
-+    uint32_t ipv6Addr[4];  /*!< 4 * 32 bit IPv6 Address.                                                     */
-+    uint16_t vlanId;       /*!< 12 bits VLAN ID. The 4 left-most bits should be cleared                      */
-+                           /*!< This field should be 0x0000 for an entry with no VLAN tag or a null VLAN ID. */
-+    uint16_t reserved;
-+} t_DsarSnmpIpv6AddrTblEntry;
-+#pragma pack(pop)
-+
-+/**************************************************************************//**
-+@Description    Deep Sleep Auto Response SNMP statistics table
-+                 
-+*//***************************************************************************/
-+typedef struct {
-+    uint32_t snmpErrCnt;  /**< Counts SNMP errors (wrong version, BER encoding, format). */
-+    uint32_t snmpCommunityErrCnt; /**< Counts messages that were dropped due to insufficient permission. */
-+    uint32_t snmpTotalDiscardCnt; /**< Counts any message that was dropped. */
-+    uint32_t snmpGetReqCnt; /**< Counts the number of get-request messages */
-+    uint32_t snmpGetNextReqCnt; /**< Counts the number of get-next-request messages */
-+} t_DsarSnmpStatistics;
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response SNMP Descriptor
-+
-+*//***************************************************************************/
-+typedef struct
-+{
-+    uint16_t control;                          /**< Control bits [0-15]. */
-+    uint16_t maxSnmpMsgLength;                 /**< Maximal allowed SNMP message length. */
-+    uint16_t numOfIpv4Addresses;               /**< Number of entries in IPv4 addresses table. */
-+    uint16_t numOfIpv6Addresses;               /**< Number of entries in IPv6 addresses table. */
-+    uint32_t p_Ipv4AddrTbl; /**< Pointer to IPv4 addresses table. */
-+    uint32_t p_Ipv6AddrTbl; /**< Pointer to IPv6 addresses table. */
-+    uint32_t p_RdOnlyCommunityStr;             /**< Pointer to the Read Only Community String. */
-+    uint32_t p_RdWrCommunityStr;               /**< Pointer to the Read Write Community String. */
-+    uint32_t p_OidsTbl;                 /**< Pointer to OIDs table. */
-+    uint32_t oidsTblSize;                      /**< Number of entries in OIDs table. */
-+    uint32_t p_Statistics;                 /**< Pointer to SNMP statistics table. */
-+} t_DsarSnmpDescriptor;
-+
-+/**************************************************************************//**
-+@Description    Deep Sleep Auto Response (Common) Statistics
-+                 
-+*//***************************************************************************/
-+typedef _Packed struct {
-+	uint32_t dsarDiscarded;
-+	uint32_t dsarErrDiscarded;
-+	uint32_t dsarFragDiscarded;
-+	uint32_t dsarTunnelDiscarded;
-+	uint32_t dsarArpDiscarded;
-+	uint32_t dsarIpDiscarded;
-+	uint32_t dsarTcpDiscarded;
-+	uint32_t dsarUdpDiscarded;
-+	uint32_t dsarIcmpV6ChecksumErr; /* ICMPv6 Checksum Error counter */
-+	uint32_t dsarIcmpV6OtherType;   /* ICMPv6 'Other' type (not Echo or Neighbor Solicitaion/Advertisement counter */
-+	uint32_t dsarIcmpV4OtherType;   /* ICMPv4 'Other' type (not Echo) counter */
-+} _PackedType t_ArStatistics;
-+
-+
-+/**************************************************************************//**
-+@Description    Deep Sleep Auto Response TCP/UDP port filter table entry
-+                 
-+*//***************************************************************************/
-+typedef _Packed struct {
-+	uint32_t	Ports;
-+	uint32_t	PortsMask;
-+} _PackedType t_PortTblEntry;
-+
-+
-+					
-+/**************************************************************************//**
-+@Description    Deep Sleep Auto Response Common Parameters Descriptor
-+                 
-+*//***************************************************************************/
-+typedef _Packed struct {
-+	uint8_t   arTxPort;            /* 0x00 0-7 Auto Response Transmit Port number            */
-+	uint8_t   controlBits;         /* 0x00 8-15 Auto Response control bits                   */
-+	uint16_t  res1;                /* 0x00 16-31 Reserved                                    */
-+	uint32_t  activeHPNIA;         /* 0x04 0-31 Active mode Hardware Parser NIA              */
-+	uint16_t  snmpPort;            /* 0x08 0-15 SNMP Port.                                   */
-+	uint8_t   macStationAddr[6];   /* 0x08 16-31 and 0x0C 0-31 MAC Station Address           */
-+	uint8_t   res2;				   /* 0x10 0-7 Reserved				    					 */
-+	uint8_t   filterControl;       /* 0x10 8-15 Filtering Control Bits.                      */
-+	uint16_t   tcpControlPass;	   /* 0x10 16-31 TCP control pass flags					     */
-+	uint8_t   ipProtocolTblSize;   /* 0x14 0-7 IP Protocol Table Size.                       */
-+	uint8_t   udpPortTblSize;      /* 0x14 8-15 UDP Port Table Size.                         */
-+	uint8_t   tcpPortTblSize;      /* 0x14 16-23 TCP Port Table Size.                        */
-+	uint8_t   res3;                /* 0x14 24-31 Reserved                                    */
-+	uint32_t  p_IpProtocolFiltTbl; /* 0x18 0-31 Pointer to IP Protocol Filter Table          */
-+	uint32_t p_UdpPortFiltTbl; /* 0x1C 0-31 Pointer to UDP Port Filter Table          */
-+	uint32_t p_TcpPortFiltTbl; /* 0x20 0-31 Pointer to TCP Port Filter Table          */
-+	uint32_t res4;                 /* 0x24 Reserved                                          */
-+	uint32_t p_ArpDescriptor;     /* 0x28 0-31 ARP Descriptor Pointer.                      */
-+	uint32_t p_NdDescriptor;      /* 0x2C 0-31 Neighbor Discovery Descriptor.               */
-+	uint32_t p_IcmpV4Descriptor;  /* 0x30 0-31 ICMPv4 Descriptor pointer.                   */
-+	uint32_t p_IcmpV6Descriptor;  /* 0x34 0-31 ICMPv6 Descriptor pointer.                   */
-+	uint32_t p_SnmpDescriptor;    /* 0x38 0-31 SNMP Descriptor pointer.                     */
-+	uint32_t p_ArStats;     /* 0x3C 0-31 Pointer to Auto Response Statistics          */
-+} _PackedType t_ArCommonDesc;
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif /* defined(__MWERKS__) && ... */ 
-+
-+/* t_ArCommonDesc.filterControl bits */
-+#define	IP_PROT_TBL_PASS_MASK	0x08
-+#define UDP_PORT_TBL_PASS_MASK	0x04
-+#define TCP_PORT_TBL_PASS_MASK	0x02
-+
-+/* Offset of TCF flags within TCP packet */
-+#define TCP_FLAGS_OFFSET 12
-+
-+
-+#endif /* __FM_PORT_DSAR_H_ */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port_im.c
-@@ -0,0 +1,753 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_port_im.c
-+
-+ @Description   FM Port Independent-Mode ...
-+*//***************************************************************************/
-+#include "std_ext.h"
-+#include "string_ext.h"
-+#include "error_ext.h"
-+#include "memcpy_ext.h"
-+#include "fm_muram_ext.h"
-+
-+#include "fm_port.h"
-+
-+
-+#define TX_CONF_STATUS_UNSENT 0x1
-+
-+
-+typedef enum e_TxConfType
-+{
-+     e_TX_CONF_TYPE_CHECK      = 0  /**< check if all the buffers were touched by the muxator, no confirmation callback */
-+    ,e_TX_CONF_TYPE_CALLBACK   = 1  /**< confirm to user all the available sent buffers */
-+    ,e_TX_CONF_TYPE_FLUSH      = 3  /**< confirm all buffers plus the unsent one with an appropriate status */
-+} e_TxConfType;
-+
-+
-+static void ImException(t_Handle h_FmPort, uint32_t event)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    ASSERT_COND(((event & (IM_EV_RX | IM_EV_BSY)) && FmIsMaster(p_FmPort->h_Fm)) ||
-+                !FmIsMaster(p_FmPort->h_Fm));
-+
-+    if (event & IM_EV_RX)
-+        FmPortImRx(p_FmPort);
-+    if ((event & IM_EV_BSY) && p_FmPort->f_Exception)
-+        p_FmPort->f_Exception(p_FmPort->h_App, e_FM_PORT_EXCEPTION_IM_BUSY);
-+}
-+
-+
-+static t_Error TxConf(t_FmPort *p_FmPort, e_TxConfType confType)
-+{
-+    t_Error             retVal = E_BUSY;
-+    uint32_t            bdStatus;
-+    uint16_t            savedStartBdId, confBdId;
-+
-+    ASSERT_COND(p_FmPort);
-+
-+    /*
-+    if (confType==e_TX_CONF_TYPE_CHECK)
-+        return (WfqEntryIsQueueEmpty(p_FmPort->im.h_WfqEntry) ? E_OK : E_BUSY);
-+    */
-+
-+    confBdId = savedStartBdId = p_FmPort->im.currBdId;
-+    bdStatus = BD_STATUS_AND_LENGTH(BD_GET(confBdId));
-+
-+    /* If R bit is set, we don't enter, or we break.
-+       we run till we get to R, or complete the loop */
-+    while ((!(bdStatus & BD_R_E) || (confType == e_TX_CONF_TYPE_FLUSH)) && (retVal != E_OK))
-+    {
-+        if (confType & e_TX_CONF_TYPE_CALLBACK) /* if it is confirmation with user callbacks */
-+            BD_STATUS_AND_LENGTH_SET(BD_GET(confBdId), 0);
-+
-+        /* case 1: R bit is 0 and Length is set -> confirm! */
-+        if ((confType & e_TX_CONF_TYPE_CALLBACK) && (bdStatus & BD_LENGTH_MASK))
-+        {
-+            if (p_FmPort->im.f_TxConf)
-+            {
-+                if ((confType == e_TX_CONF_TYPE_FLUSH) && (bdStatus & BD_R_E))
-+                    p_FmPort->im.f_TxConf(p_FmPort->h_App,
-+                                          BdBufferGet(XX_PhysToVirt, BD_GET(confBdId)),
-+                                          TX_CONF_STATUS_UNSENT,
-+                                          p_FmPort->im.p_BdShadow[confBdId]);
-+                else
-+                    p_FmPort->im.f_TxConf(p_FmPort->h_App,
-+                                          BdBufferGet(XX_PhysToVirt, BD_GET(confBdId)),
-+                                          0,
-+                                          p_FmPort->im.p_BdShadow[confBdId]);
-+            }
-+        }
-+        /* case 2: R bit is 0 and Length is 0 -> not used yet, nop! */
-+
-+        confBdId = GetNextBdId(p_FmPort, confBdId);
-+        if (confBdId == savedStartBdId)
-+            retVal = E_OK;
-+        bdStatus = BD_STATUS_AND_LENGTH(BD_GET(confBdId));
-+    }
-+
-+    return retVal;
-+}
-+
-+t_Error FmPortImEnable(t_FmPort *p_FmPort)
-+{
-+    uint32_t    tmpReg = GET_UINT32(p_FmPort->im.p_FmPortImPram->mode);
-+    WRITE_UINT32(p_FmPort->im.p_FmPortImPram->mode, (uint32_t)(tmpReg & ~IM_MODE_GRC_STP));
-+    return E_OK;
-+}
-+
-+t_Error FmPortImDisable(t_FmPort *p_FmPort)
-+{
-+    uint32_t    tmpReg = GET_UINT32(p_FmPort->im.p_FmPortImPram->mode);
-+    WRITE_UINT32(p_FmPort->im.p_FmPortImPram->mode, (uint32_t)(tmpReg | IM_MODE_GRC_STP));
-+    return E_OK;
-+}
-+
-+t_Error FmPortImRx(t_FmPort *p_FmPort)
-+{
-+    t_Handle                h_CurrUserPriv, h_NewUserPriv;
-+    uint32_t                bdStatus;
-+    volatile uint8_t        buffPos;
-+    uint16_t                length;
-+    uint16_t                errors;
-+    uint8_t                 *p_CurData, *p_Data;
-+    uint32_t                flags;
-+
-+    ASSERT_COND(p_FmPort);
-+
-+    flags = XX_LockIntrSpinlock(p_FmPort->h_Spinlock);
-+    if (p_FmPort->lock)
-+    {
-+        XX_UnlockIntrSpinlock(p_FmPort->h_Spinlock, flags);
-+        return E_OK;
-+    }
-+    p_FmPort->lock = TRUE;
-+    XX_UnlockIntrSpinlock(p_FmPort->h_Spinlock, flags);
-+
-+    bdStatus = BD_STATUS_AND_LENGTH(BD_GET(p_FmPort->im.currBdId));
-+
-+    while (!(bdStatus & BD_R_E)) /* while there is data in the Rx BD */
-+    {
-+        if ((p_Data = p_FmPort->im.rxPool.f_GetBuf(p_FmPort->im.rxPool.h_BufferPool, &h_NewUserPriv)) == NULL)
-+        {
-+            p_FmPort->lock = FALSE;
-+            RETURN_ERROR(MAJOR, E_NOT_AVAILABLE, ("Data buffer"));
-+        }
-+
-+        if (p_FmPort->im.firstBdOfFrameId == IM_ILEGAL_BD_ID)
-+            p_FmPort->im.firstBdOfFrameId = p_FmPort->im.currBdId;
-+
-+        p_CurData = BdBufferGet(p_FmPort->im.rxPool.f_PhysToVirt, BD_GET(p_FmPort->im.currBdId));
-+        h_CurrUserPriv = p_FmPort->im.p_BdShadow[p_FmPort->im.currBdId];
-+        length = (uint16_t)((bdStatus & BD_L) ?
-+                            ((bdStatus & BD_LENGTH_MASK) - p_FmPort->im.rxFrameAccumLength):
-+                            (bdStatus & BD_LENGTH_MASK));
-+        p_FmPort->im.rxFrameAccumLength += length;
-+
-+        /* determine whether buffer is first, last, first and last (single  */
-+        /* buffer frame) or middle (not first and not last)                 */
-+        buffPos = (uint8_t)((p_FmPort->im.currBdId == p_FmPort->im.firstBdOfFrameId) ?
-+                            ((bdStatus & BD_L) ? SINGLE_BUF : FIRST_BUF) :
-+                            ((bdStatus & BD_L) ? LAST_BUF : MIDDLE_BUF));
-+
-+        if (bdStatus & BD_L)
-+        {
-+            p_FmPort->im.rxFrameAccumLength = 0;
-+            p_FmPort->im.firstBdOfFrameId = IM_ILEGAL_BD_ID;
-+        }
-+
-+        BdBufferSet(p_FmPort->im.rxPool.f_VirtToPhys, BD_GET(p_FmPort->im.currBdId), p_Data);
-+
-+        BD_STATUS_AND_LENGTH_SET(BD_GET(p_FmPort->im.currBdId), BD_R_E);
-+
-+        errors = (uint16_t)((bdStatus & BD_RX_ERRORS) >> 16);
-+        p_FmPort->im.p_BdShadow[p_FmPort->im.currBdId] = h_NewUserPriv;
-+
-+        p_FmPort->im.currBdId = GetNextBdId(p_FmPort, p_FmPort->im.currBdId);
-+        WRITE_UINT16(p_FmPort->im.p_FmPortImPram->rxQd.offsetOut, (uint16_t)(p_FmPort->im.currBdId<<4));
-+        /* Pass the buffer if one of the conditions is true:
-+        - There are no errors
-+        - This is a part of a larger frame ( the application has already received some buffers ) */
-+        if ((buffPos != SINGLE_BUF) || !errors)
-+        {
-+            if (p_FmPort->im.f_RxStore(p_FmPort->h_App,
-+                                       p_CurData,
-+                                       length,
-+                                       errors,
-+                                       buffPos,
-+                                       h_CurrUserPriv) == e_RX_STORE_RESPONSE_PAUSE)
-+                break;
-+        }
-+        else if (p_FmPort->im.rxPool.f_PutBuf(p_FmPort->im.rxPool.h_BufferPool,
-+                                              p_CurData,
-+                                              h_CurrUserPriv))
-+        {
-+            p_FmPort->lock = FALSE;
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Failed freeing data buffer"));
-+        }
-+
-+        bdStatus = BD_STATUS_AND_LENGTH(BD_GET(p_FmPort->im.currBdId));
-+    }
-+    p_FmPort->lock = FALSE;
-+    return E_OK;
-+}
-+
-+void FmPortConfigIM (t_FmPort *p_FmPort, t_FmPortParams *p_FmPortParams)
-+{
-+    ASSERT_COND(p_FmPort);
-+
-+    SANITY_CHECK_RETURN(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmPort->im.h_FmMuram                      = p_FmPortParams->specificParams.imRxTxParams.h_FmMuram;
-+    p_FmPort->p_FmPortDriverParam->liodnOffset  = p_FmPortParams->specificParams.imRxTxParams.liodnOffset;
-+    p_FmPort->im.dataMemId                      = p_FmPortParams->specificParams.imRxTxParams.dataMemId;
-+    p_FmPort->im.dataMemAttributes              = p_FmPortParams->specificParams.imRxTxParams.dataMemAttributes;
-+
-+    p_FmPort->im.fwExtStructsMemId              = DEFAULT_PORT_ImfwExtStructsMemId;
-+    p_FmPort->im.fwExtStructsMemAttr            = DEFAULT_PORT_ImfwExtStructsMemAttr;
-+
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_RX) ||
-+        (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G))
-+    {
-+        p_FmPort->im.rxPool.h_BufferPool    = p_FmPortParams->specificParams.imRxTxParams.rxPoolParams.h_BufferPool;
-+        p_FmPort->im.rxPool.f_GetBuf        = p_FmPortParams->specificParams.imRxTxParams.rxPoolParams.f_GetBuf;
-+        p_FmPort->im.rxPool.f_PutBuf        = p_FmPortParams->specificParams.imRxTxParams.rxPoolParams.f_PutBuf;
-+        p_FmPort->im.rxPool.bufferSize      = p_FmPortParams->specificParams.imRxTxParams.rxPoolParams.bufferSize;
-+        p_FmPort->im.rxPool.f_PhysToVirt    = p_FmPortParams->specificParams.imRxTxParams.rxPoolParams.f_PhysToVirt;
-+        if (!p_FmPort->im.rxPool.f_PhysToVirt)
-+            p_FmPort->im.rxPool.f_PhysToVirt = XX_PhysToVirt;
-+        p_FmPort->im.rxPool.f_VirtToPhys    = p_FmPortParams->specificParams.imRxTxParams.rxPoolParams.f_VirtToPhys;
-+        if (!p_FmPort->im.rxPool.f_VirtToPhys)
-+            p_FmPort->im.rxPool.f_VirtToPhys = XX_VirtToPhys;
-+        p_FmPort->im.f_RxStore              = p_FmPortParams->specificParams.imRxTxParams.f_RxStore;
-+
-+        p_FmPort->im.mrblr                  = 0x8000;
-+        while (p_FmPort->im.mrblr)
-+        {
-+            if (p_FmPort->im.rxPool.bufferSize & p_FmPort->im.mrblr)
-+                break;
-+            p_FmPort->im.mrblr >>= 1;
-+        }
-+        if (p_FmPort->im.mrblr != p_FmPort->im.rxPool.bufferSize)
-+            DBG(WARNING, ("Max-Rx-Buffer-Length set to %d", p_FmPort->im.mrblr));
-+        p_FmPort->im.bdRingSize             = DEFAULT_PORT_rxBdRingLength;
-+        p_FmPort->exceptions                = DEFAULT_PORT_exception;
-+        if (FmIsMaster(p_FmPort->h_Fm))
-+            p_FmPort->polling               = FALSE;
-+        else
-+            p_FmPort->polling               = TRUE;
-+        p_FmPort->fmanCtrlEventId           = (uint8_t)NO_IRQ;
-+    }
-+    else
-+    {
-+        p_FmPort->im.f_TxConf               = p_FmPortParams->specificParams.imRxTxParams.f_TxConf;
-+
-+        p_FmPort->im.bdRingSize             = DEFAULT_PORT_txBdRingLength;
-+    }
-+}
-+
-+t_Error FmPortImCheckInitParameters(t_FmPort *p_FmPort)
-+{
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX) &&
-+        (p_FmPort->portType != e_FM_PORT_TYPE_RX_10G) &&
-+        (p_FmPort->portType != e_FM_PORT_TYPE_TX) &&
-+        (p_FmPort->portType != e_FM_PORT_TYPE_TX_10G))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, NO_MSG);
-+
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_RX) ||
-+        (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G))
-+    {
-+        if (!POWER_OF_2(p_FmPort->im.mrblr))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("max Rx buffer length must be power of 2!!!"));
-+        if (p_FmPort->im.mrblr < 256)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("max Rx buffer length must at least 256!!!"));
-+        if (p_FmPort->p_FmPortDriverParam->liodnOffset & ~FM_LIODN_OFFSET_MASK)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("liodnOffset is larger than %d", FM_LIODN_OFFSET_MASK+1));
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Error FmPortImInit(t_FmPort *p_FmPort)
-+{
-+    t_FmImBd    *p_Bd=NULL;
-+    t_Handle    h_BufContext;
-+    uint64_t    tmpPhysBase;
-+    uint16_t    log2Num;
-+    uint8_t     *p_Data/*, *p_Tmp*/;
-+    int         i;
-+    t_Error     err;
-+    uint16_t    tmpReg16;
-+    uint32_t    tmpReg32;
-+
-+    ASSERT_COND(p_FmPort);
-+
-+    p_FmPort->im.p_FmPortImPram =
-+        (t_FmPortImPram *)FM_MURAM_AllocMem(p_FmPort->im.h_FmMuram, sizeof(t_FmPortImPram), IM_PRAM_ALIGN);
-+    if (!p_FmPort->im.p_FmPortImPram)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Independent-Mode Parameter-RAM!!!"));
-+    WRITE_BLOCK(p_FmPort->im.p_FmPortImPram, 0, sizeof(t_FmPortImPram));
-+
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_RX) ||
-+        (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G))
-+    {
-+        p_FmPort->im.p_BdRing =
-+            (t_FmImBd *)XX_MallocSmart((uint32_t)(sizeof(t_FmImBd)*p_FmPort->im.bdRingSize),
-+                                       p_FmPort->im.fwExtStructsMemId,
-+                                       4);
-+        if (!p_FmPort->im.p_BdRing)
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Independent-Mode Rx BD ring!!!"));
-+        IOMemSet32(p_FmPort->im.p_BdRing, 0, (uint32_t)(sizeof(t_FmImBd)*p_FmPort->im.bdRingSize));
-+
-+        p_FmPort->im.p_BdShadow = (t_Handle *)XX_Malloc((uint32_t)(sizeof(t_Handle)*p_FmPort->im.bdRingSize));
-+        if (!p_FmPort->im.p_BdShadow)
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Independent-Mode Rx BD shadow!!!"));
-+        memset(p_FmPort->im.p_BdShadow, 0, (uint32_t)(sizeof(t_Handle)*p_FmPort->im.bdRingSize));
-+
-+        /* Initialize the Rx-BD ring */
-+        for (i=0; i<p_FmPort->im.bdRingSize; i++)
-+        {
-+            p_Bd = BD_GET(i);
-+            BD_STATUS_AND_LENGTH_SET (p_Bd, BD_R_E);
-+
-+            if ((p_Data = p_FmPort->im.rxPool.f_GetBuf(p_FmPort->im.rxPool.h_BufferPool, &h_BufContext)) == NULL)
-+                RETURN_ERROR(MAJOR, E_NOT_AVAILABLE, ("Data buffer"));
-+            BdBufferSet(p_FmPort->im.rxPool.f_VirtToPhys, p_Bd, p_Data);
-+            p_FmPort->im.p_BdShadow[i] = h_BufContext;
-+        }
-+
-+        if ((p_FmPort->im.dataMemAttributes & MEMORY_ATTR_CACHEABLE) ||
-+            (p_FmPort->im.fwExtStructsMemAttr & MEMORY_ATTR_CACHEABLE))
-+            WRITE_UINT32(p_FmPort->im.p_FmPortImPram->mode, IM_MODE_GBL | IM_MODE_SET_BO(2));
-+        else
-+            WRITE_UINT32(p_FmPort->im.p_FmPortImPram->mode, IM_MODE_SET_BO(2));
-+
-+        WRITE_UINT32(p_FmPort->im.p_FmPortImPram->rxQdPtr,
-+                     (uint32_t)((uint64_t)(XX_VirtToPhys(p_FmPort->im.p_FmPortImPram)) -
-+                                p_FmPort->fmMuramPhysBaseAddr + 0x20));
-+
-+        LOG2((uint64_t)p_FmPort->im.mrblr, log2Num);
-+        WRITE_UINT16(p_FmPort->im.p_FmPortImPram->mrblr, log2Num);
-+
-+        /* Initialize Rx QD */
-+        tmpPhysBase = (uint64_t)(XX_VirtToPhys(p_FmPort->im.p_BdRing));
-+        SET_ADDR(&p_FmPort->im.p_FmPortImPram->rxQd.bdRingBase, tmpPhysBase);
-+        WRITE_UINT16(p_FmPort->im.p_FmPortImPram->rxQd.bdRingSize, (uint16_t)(sizeof(t_FmImBd)*p_FmPort->im.bdRingSize));
-+
-+        /* Update the IM PRAM address in the BMI */
-+        WRITE_UINT32(p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rfqid,
-+                     (uint32_t)((uint64_t)(XX_VirtToPhys(p_FmPort->im.p_FmPortImPram)) -
-+                                p_FmPort->fmMuramPhysBaseAddr));
-+        if (!p_FmPort->polling || p_FmPort->exceptions)
-+        {
-+            /* Allocate, configure and register interrupts */
-+            err = FmAllocFmanCtrlEventReg(p_FmPort->h_Fm, &p_FmPort->fmanCtrlEventId);
-+            if (err)
-+                RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+            ASSERT_COND(!(p_FmPort->fmanCtrlEventId & ~IM_RXQD_FPMEVT_SEL_MASK));
-+            tmpReg16 = (uint16_t)(p_FmPort->fmanCtrlEventId & IM_RXQD_FPMEVT_SEL_MASK);
-+            tmpReg32 = 0;
-+
-+            if (p_FmPort->exceptions & IM_EV_BSY)
-+            {
-+                tmpReg16 |= IM_RXQD_BSYINTM;
-+                tmpReg32 |= IM_EV_BSY;
-+            }
-+            if (!p_FmPort->polling)
-+            {
-+                tmpReg16 |= IM_RXQD_RXFINTM;
-+                tmpReg32 |= IM_EV_RX;
-+            }
-+            WRITE_UINT16(p_FmPort->im.p_FmPortImPram->rxQd.gen, tmpReg16);
-+
-+            FmRegisterFmanCtrlIntr(p_FmPort->h_Fm, p_FmPort->fmanCtrlEventId, ImException , (t_Handle)p_FmPort);
-+
-+            FmSetFmanCtrlIntr(p_FmPort->h_Fm, p_FmPort->fmanCtrlEventId, tmpReg32);
-+        }
-+        else
-+            p_FmPort->fmanCtrlEventId = (uint8_t)NO_IRQ;
-+    }
-+    else
-+    {
-+        p_FmPort->im.p_BdRing = (t_FmImBd *)XX_MallocSmart((uint32_t)(sizeof(t_FmImBd)*p_FmPort->im.bdRingSize), p_FmPort->im.fwExtStructsMemId, 4);
-+        if (!p_FmPort->im.p_BdRing)
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Independent-Mode Tx BD ring!!!"));
-+        IOMemSet32(p_FmPort->im.p_BdRing, 0, (uint32_t)(sizeof(t_FmImBd)*p_FmPort->im.bdRingSize));
-+
-+        p_FmPort->im.p_BdShadow = (t_Handle *)XX_Malloc((uint32_t)(sizeof(t_Handle)*p_FmPort->im.bdRingSize));
-+        if (!p_FmPort->im.p_BdShadow)
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, ("Independent-Mode Rx BD shadow!!!"));
-+        memset(p_FmPort->im.p_BdShadow, 0, (uint32_t)(sizeof(t_Handle)*p_FmPort->im.bdRingSize));
-+        p_FmPort->im.firstBdOfFrameId = IM_ILEGAL_BD_ID;
-+
-+        if ((p_FmPort->im.dataMemAttributes & MEMORY_ATTR_CACHEABLE) ||
-+            (p_FmPort->im.fwExtStructsMemAttr & MEMORY_ATTR_CACHEABLE))
-+            WRITE_UINT32(p_FmPort->im.p_FmPortImPram->mode, IM_MODE_GBL | IM_MODE_SET_BO(2));
-+        else
-+            WRITE_UINT32(p_FmPort->im.p_FmPortImPram->mode, IM_MODE_SET_BO(2));
-+
-+        WRITE_UINT32(p_FmPort->im.p_FmPortImPram->txQdPtr,
-+                     (uint32_t)((uint64_t)(XX_VirtToPhys(p_FmPort->im.p_FmPortImPram)) -
-+                                p_FmPort->fmMuramPhysBaseAddr + 0x40));
-+
-+        /* Initialize Tx QD */
-+        tmpPhysBase = (uint64_t)(XX_VirtToPhys(p_FmPort->im.p_BdRing));
-+        SET_ADDR(&p_FmPort->im.p_FmPortImPram->txQd.bdRingBase, tmpPhysBase);
-+        WRITE_UINT16(p_FmPort->im.p_FmPortImPram->txQd.bdRingSize, (uint16_t)(sizeof(t_FmImBd)*p_FmPort->im.bdRingSize));
-+
-+        /* Update the IM PRAM address in the BMI */
-+        WRITE_UINT32(p_FmPort->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tcfqid,
-+                     (uint32_t)((uint64_t)(XX_VirtToPhys(p_FmPort->im.p_FmPortImPram)) -
-+                                p_FmPort->fmMuramPhysBaseAddr));
-+    }
-+
-+
-+    return E_OK;
-+}
-+
-+void FmPortImFree(t_FmPort *p_FmPort)
-+{
-+    uint32_t    bdStatus;
-+    uint8_t     *p_CurData;
-+
-+    ASSERT_COND(p_FmPort);
-+    ASSERT_COND(p_FmPort->im.p_FmPortImPram);
-+
-+    if ((p_FmPort->portType == e_FM_PORT_TYPE_RX) ||
-+        (p_FmPort->portType == e_FM_PORT_TYPE_RX_10G))
-+    {
-+        if (!p_FmPort->polling || p_FmPort->exceptions)
-+        {
-+            /* Deallocate and unregister interrupts */
-+            FmSetFmanCtrlIntr(p_FmPort->h_Fm, p_FmPort->fmanCtrlEventId, 0);
-+
-+            FmFreeFmanCtrlEventReg(p_FmPort->h_Fm, p_FmPort->fmanCtrlEventId);
-+
-+            WRITE_UINT16(p_FmPort->im.p_FmPortImPram->rxQd.gen, 0);
-+
-+            FmUnregisterFmanCtrlIntr(p_FmPort->h_Fm, p_FmPort->fmanCtrlEventId);
-+        }
-+        /* Try first clean what has received */
-+        FmPortImRx(p_FmPort);
-+
-+        /* Now, get rid of the the empty buffer! */
-+        bdStatus = BD_STATUS_AND_LENGTH(BD_GET(p_FmPort->im.currBdId));
-+
-+        while (bdStatus & BD_R_E) /* while there is data in the Rx BD */
-+        {
-+            p_CurData = BdBufferGet(p_FmPort->im.rxPool.f_PhysToVirt, BD_GET(p_FmPort->im.currBdId));
-+
-+            BdBufferSet(p_FmPort->im.rxPool.f_VirtToPhys, BD_GET(p_FmPort->im.currBdId), NULL);
-+            BD_STATUS_AND_LENGTH_SET(BD_GET(p_FmPort->im.currBdId), 0);
-+
-+            p_FmPort->im.rxPool.f_PutBuf(p_FmPort->im.rxPool.h_BufferPool,
-+                                         p_CurData,
-+                                         p_FmPort->im.p_BdShadow[p_FmPort->im.currBdId]);
-+
-+            p_FmPort->im.currBdId = GetNextBdId(p_FmPort, p_FmPort->im.currBdId);
-+            bdStatus = BD_STATUS_AND_LENGTH(BD_GET(p_FmPort->im.currBdId));
-+        }
-+    }
-+    else
-+        TxConf(p_FmPort, e_TX_CONF_TYPE_FLUSH);
-+
-+    FM_MURAM_FreeMem(p_FmPort->im.h_FmMuram, p_FmPort->im.p_FmPortImPram);
-+
-+    if (p_FmPort->im.p_BdShadow)
-+        XX_Free(p_FmPort->im.p_BdShadow);
-+
-+    if (p_FmPort->im.p_BdRing)
-+        XX_FreeSmart(p_FmPort->im.p_BdRing);
-+}
-+
-+
-+t_Error FM_PORT_ConfigIMMaxRxBufLength(t_Handle h_FmPort, uint16_t newVal)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->imEn, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmPort->im.mrblr = newVal;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigIMRxBdRingLength(t_Handle h_FmPort, uint16_t newVal)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->imEn, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmPort->im.bdRingSize = newVal;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigIMTxBdRingLength(t_Handle h_FmPort, uint16_t newVal)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->imEn, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmPort->im.bdRingSize = newVal;
-+
-+    return E_OK;
-+}
-+
-+t_Error  FM_PORT_ConfigIMFmanCtrlExternalStructsMemory(t_Handle h_FmPort,
-+                                                       uint8_t  memId,
-+                                                       uint32_t memAttributes)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->imEn, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    p_FmPort->im.fwExtStructsMemId              = memId;
-+    p_FmPort->im.fwExtStructsMemAttr            = memAttributes;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_ConfigIMPolling(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->imEn, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    if ((p_FmPort->portType != e_FM_PORT_TYPE_RX_10G) && (p_FmPort->portType != e_FM_PORT_TYPE_RX))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION, ("Available for Rx ports only"));
-+
-+    if (!FmIsMaster(p_FmPort->h_Fm))
-+        RETURN_ERROR(MAJOR, E_INVALID_OPERATION, ("Available on master-partition only;"
-+                                                  "in guest-partitions, IM is always in polling!"));
-+
-+    p_FmPort->polling = TRUE;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_PORT_SetIMExceptions(t_Handle h_FmPort, e_FmPortExceptions exception, bool enable)
-+{
-+    t_FmPort    *p_FmPort = (t_FmPort*)h_FmPort;
-+    t_Error     err;
-+    uint16_t    tmpReg16;
-+    uint32_t    tmpReg32;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->imEn, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    if (exception == e_FM_PORT_EXCEPTION_IM_BUSY)
-+    {
-+        if (enable)
-+        {
-+            p_FmPort->exceptions |= IM_EV_BSY;
-+            if (p_FmPort->fmanCtrlEventId == (uint8_t)NO_IRQ)
-+            {
-+                /* Allocate, configure and register interrupts */
-+                err = FmAllocFmanCtrlEventReg(p_FmPort->h_Fm, &p_FmPort->fmanCtrlEventId);
-+                if (err)
-+                    RETURN_ERROR(MAJOR, err, NO_MSG);
-+                ASSERT_COND(!(p_FmPort->fmanCtrlEventId & ~IM_RXQD_FPMEVT_SEL_MASK));
-+
-+                FmRegisterFmanCtrlIntr(p_FmPort->h_Fm, p_FmPort->fmanCtrlEventId, ImException, (t_Handle)p_FmPort);
-+                tmpReg16 = (uint16_t)((p_FmPort->fmanCtrlEventId & IM_RXQD_FPMEVT_SEL_MASK) | IM_RXQD_BSYINTM);
-+                tmpReg32 = IM_EV_BSY;
-+            }
-+            else
-+            {
-+                tmpReg16 = (uint16_t)(GET_UINT16(p_FmPort->im.p_FmPortImPram->rxQd.gen) | IM_RXQD_BSYINTM);
-+                tmpReg32 = FmGetFmanCtrlIntr(p_FmPort->h_Fm, p_FmPort->fmanCtrlEventId) | IM_EV_BSY;
-+            }
-+
-+            WRITE_UINT16(p_FmPort->im.p_FmPortImPram->rxQd.gen, tmpReg16);
-+            FmSetFmanCtrlIntr(p_FmPort->h_Fm, p_FmPort->fmanCtrlEventId, tmpReg32);
-+        }
-+        else
-+        {
-+            p_FmPort->exceptions &= ~IM_EV_BSY;
-+            if (!p_FmPort->exceptions && p_FmPort->polling)
-+            {
-+                FmFreeFmanCtrlEventReg(p_FmPort->h_Fm, p_FmPort->fmanCtrlEventId);
-+                FmUnregisterFmanCtrlIntr(p_FmPort->h_Fm, p_FmPort->fmanCtrlEventId);
-+                FmSetFmanCtrlIntr(p_FmPort->h_Fm, p_FmPort->fmanCtrlEventId, 0);
-+                WRITE_UINT16(p_FmPort->im.p_FmPortImPram->rxQd.gen, 0);
-+                p_FmPort->fmanCtrlEventId = (uint8_t)NO_IRQ;
-+            }
-+            else
-+            {
-+                tmpReg16 = (uint16_t)(GET_UINT16(p_FmPort->im.p_FmPortImPram->rxQd.gen) & ~IM_RXQD_BSYINTM);
-+                WRITE_UINT16(p_FmPort->im.p_FmPortImPram->rxQd.gen, tmpReg16);
-+                tmpReg32 = FmGetFmanCtrlIntr(p_FmPort->h_Fm, p_FmPort->fmanCtrlEventId) & ~IM_EV_BSY;
-+                FmSetFmanCtrlIntr(p_FmPort->h_Fm, p_FmPort->fmanCtrlEventId, tmpReg32);
-+            }
-+        }
-+    }
-+    else
-+        RETURN_ERROR(MINOR, E_INVALID_SELECTION, ("Invalid exception."));
-+
-+    return E_OK;
-+}
-+
-+t_Error  FM_PORT_ImTx( t_Handle               h_FmPort,
-+                       uint8_t                *p_Data,
-+                       uint16_t               length,
-+                       bool                   lastBuffer,
-+                       t_Handle               h_BufContext)
-+{
-+    t_FmPort            *p_FmPort = (t_FmPort*)h_FmPort;
-+    uint16_t            nextBdId;
-+    uint32_t            bdStatus, nextBdStatus;
-+    bool                firstBuffer;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->imEn, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    bdStatus = BD_STATUS_AND_LENGTH(BD_GET(p_FmPort->im.currBdId));
-+    nextBdId = GetNextBdId(p_FmPort, p_FmPort->im.currBdId);
-+    nextBdStatus = BD_STATUS_AND_LENGTH(BD_GET(nextBdId));
-+
-+    if (!(bdStatus & BD_R_E) && !(nextBdStatus & BD_R_E))
-+    {
-+        /* Confirm the current BD - BD is available */
-+        if ((bdStatus & BD_LENGTH_MASK) && (p_FmPort->im.f_TxConf))
-+            p_FmPort->im.f_TxConf (p_FmPort->h_App,
-+                                   BdBufferGet(XX_PhysToVirt, BD_GET(p_FmPort->im.currBdId)),
-+                                   0,
-+                                   p_FmPort->im.p_BdShadow[p_FmPort->im.currBdId]);
-+
-+        bdStatus = length;
-+
-+        /* if this is the first BD of a frame */
-+        if (p_FmPort->im.firstBdOfFrameId == IM_ILEGAL_BD_ID)
-+        {
-+            firstBuffer = TRUE;
-+            p_FmPort->im.txFirstBdStatus = (bdStatus | BD_R_E);
-+
-+            if (!lastBuffer)
-+                p_FmPort->im.firstBdOfFrameId = p_FmPort->im.currBdId;
-+        }
-+        else
-+            firstBuffer = FALSE;
-+
-+        BdBufferSet(XX_VirtToPhys, BD_GET(p_FmPort->im.currBdId), p_Data);
-+        p_FmPort->im.p_BdShadow[p_FmPort->im.currBdId] = h_BufContext;
-+
-+        /* deal with last */
-+        if (lastBuffer)
-+        {
-+            /* if single buffer frame */
-+            if (firstBuffer)
-+                BD_STATUS_AND_LENGTH_SET(BD_GET(p_FmPort->im.currBdId), p_FmPort->im.txFirstBdStatus | BD_L);
-+            else
-+            {
-+                /* Set the last BD of the frame */
-+                BD_STATUS_AND_LENGTH_SET (BD_GET(p_FmPort->im.currBdId), (bdStatus | BD_R_E | BD_L));
-+                /* Set the first BD of the frame */
-+                BD_STATUS_AND_LENGTH_SET(BD_GET(p_FmPort->im.firstBdOfFrameId), p_FmPort->im.txFirstBdStatus);
-+                p_FmPort->im.firstBdOfFrameId = IM_ILEGAL_BD_ID;
-+            }
-+            WRITE_UINT16(p_FmPort->im.p_FmPortImPram->txQd.offsetIn, (uint16_t)(GetNextBdId(p_FmPort, p_FmPort->im.currBdId)<<4));
-+        }
-+        else if (!firstBuffer) /* mid frame buffer */
-+            BD_STATUS_AND_LENGTH_SET (BD_GET(p_FmPort->im.currBdId), bdStatus | BD_R_E);
-+
-+        p_FmPort->im.currBdId = GetNextBdId(p_FmPort, p_FmPort->im.currBdId);
-+    }
-+    else
-+    {
-+        /* Discard current frame. Return error.   */
-+        if (p_FmPort->im.firstBdOfFrameId != IM_ILEGAL_BD_ID)
-+        {
-+            /* Error:    No free BD */
-+            /* Response: Discard current frame. Return error.   */
-+            uint16_t   cleanBdId = p_FmPort->im.firstBdOfFrameId;
-+
-+            ASSERT_COND(p_FmPort->im.firstBdOfFrameId != p_FmPort->im.currBdId);
-+
-+            /* Since firstInFrame is not NULL, one buffer at least has already been
-+               inserted into the BD ring. Using do-while covers the situation of a
-+               frame spanned throughout the whole Tx BD ring (p_CleanBd is incremented
-+               prior to testing whether or not it's equal to TxBd). */
-+            do
-+            {
-+                BD_STATUS_AND_LENGTH_SET(BD_GET(cleanBdId), 0);
-+                /* Advance BD pointer */
-+                cleanBdId = GetNextBdId(p_FmPort, cleanBdId);
-+            } while (cleanBdId != p_FmPort->im.currBdId);
-+
-+            p_FmPort->im.currBdId = cleanBdId;
-+            p_FmPort->im.firstBdOfFrameId = IM_ILEGAL_BD_ID;
-+        }
-+
-+        return ERROR_CODE(E_FULL);
-+    }
-+
-+    return E_OK;
-+}
-+
-+void FM_PORT_ImTxConf(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN(p_FmPort->imEn, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN(!p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    TxConf(p_FmPort, e_TX_CONF_TYPE_CALLBACK);
-+}
-+
-+t_Error  FM_PORT_ImRx(t_Handle h_FmPort)
-+{
-+    t_FmPort *p_FmPort = (t_FmPort*)h_FmPort;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmPort->imEn, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(!p_FmPort->p_FmPortDriverParam, E_INVALID_HANDLE);
-+
-+    return FmPortImRx(p_FmPort);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fman_port.c
-@@ -0,0 +1,1568 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#include "common/general.h"
-+
-+#include "fman_common.h"
-+#include "fsl_fman_port.h"
-+
-+
-+/* problem Eyal: the following should not be here*/
-+#define NIA_FM_CTL_AC_NO_IPACC_PRE_BMI_ENQ_FRAME        0x00000028
-+
-+static uint32_t get_no_pcd_nia_bmi_ac_enc_frame(struct fman_port_cfg *cfg)
-+{
-+    if (cfg->errata_A006675)
-+        return NIA_ENG_FM_CTL |
-+            NIA_FM_CTL_AC_NO_IPACC_PRE_BMI_ENQ_FRAME;
-+    else
-+        return NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME;
-+}
-+
-+static int init_bmi_rx(struct fman_port *port,
-+        struct fman_port_cfg *cfg,
-+        struct fman_port_params *params)
-+{
-+    struct fman_port_rx_bmi_regs *regs = &port->bmi_regs->rx;
-+    uint32_t tmp;
-+
-+    /* Rx Configuration register */
-+    tmp = 0;
-+    if (port->im_en)
-+        tmp |= BMI_PORT_CFG_IM;
-+    else if (cfg->discard_override)
-+        tmp |= BMI_PORT_CFG_FDOVR;
-+    iowrite32be(tmp, &regs->fmbm_rcfg);
-+
-+    /* DMA attributes */
-+    tmp = (uint32_t)cfg->dma_swap_data << BMI_DMA_ATTR_SWP_SHIFT;
-+    if (cfg->dma_ic_stash_on)
-+        tmp |= BMI_DMA_ATTR_IC_STASH_ON;
-+    if (cfg->dma_header_stash_on)
-+        tmp |= BMI_DMA_ATTR_HDR_STASH_ON;
-+    if (cfg->dma_sg_stash_on)
-+        tmp |= BMI_DMA_ATTR_SG_STASH_ON;
-+    if (cfg->dma_write_optimize)
-+        tmp |= BMI_DMA_ATTR_WRITE_OPTIMIZE;
-+    iowrite32be(tmp, &regs->fmbm_rda);
-+
-+    /* Rx FIFO parameters */
-+    tmp = (cfg->rx_pri_elevation / FMAN_PORT_BMI_FIFO_UNITS - 1) <<
-+            BMI_RX_FIFO_PRI_ELEVATION_SHIFT;
-+    tmp |= cfg->rx_fifo_thr / FMAN_PORT_BMI_FIFO_UNITS - 1;
-+    iowrite32be(tmp, &regs->fmbm_rfp);
-+
-+    if (cfg->excessive_threshold_register)
-+        /* always allow access to the extra resources */
-+        iowrite32be(BMI_RX_FIFO_THRESHOLD_ETHE, &regs->fmbm_reth);
-+
-+    /* Frame end data */
-+    tmp = (uint32_t)cfg->checksum_bytes_ignore <<
-+            BMI_RX_FRAME_END_CS_IGNORE_SHIFT;
-+    tmp |= (uint32_t)cfg->rx_cut_end_bytes <<
-+            BMI_RX_FRAME_END_CUT_SHIFT;
-+    if (cfg->errata_A006320)
-+        tmp &= 0xffe0ffff;
-+    iowrite32be(tmp, &regs->fmbm_rfed);
-+
-+    /* Internal context parameters */
-+    tmp = ((uint32_t)cfg->ic_ext_offset / FMAN_PORT_IC_OFFSET_UNITS) <<
-+            BMI_IC_TO_EXT_SHIFT;
-+    tmp |= ((uint32_t)cfg->ic_int_offset / FMAN_PORT_IC_OFFSET_UNITS) <<
-+            BMI_IC_FROM_INT_SHIFT;
-+    tmp |= cfg->ic_size / FMAN_PORT_IC_OFFSET_UNITS;
-+    iowrite32be(tmp, &regs->fmbm_ricp);
-+
-+    /* Internal buffer offset */
-+    tmp = ((uint32_t)cfg->int_buf_start_margin / FMAN_PORT_IC_OFFSET_UNITS)
-+            << BMI_INT_BUF_MARG_SHIFT;
-+    iowrite32be(tmp, &regs->fmbm_rim);
-+
-+    /* External buffer margins */
-+    if (!port->im_en)
-+    {
-+        tmp = (uint32_t)cfg->ext_buf_start_margin <<
-+                BMI_EXT_BUF_MARG_START_SHIFT;
-+        tmp |= (uint32_t)cfg->ext_buf_end_margin;
-+        if (cfg->fmbm_rebm_has_sgd && cfg->no_scatter_gather)
-+            tmp |= BMI_SG_DISABLE;
-+        iowrite32be(tmp, &regs->fmbm_rebm);
-+    }
-+
-+    /* Frame attributes */
-+    tmp = BMI_CMD_RX_MR_DEF;
-+    if (!port->im_en)
-+    {
-+        tmp |= BMI_CMD_ATTR_ORDER;
-+        tmp |= (uint32_t)cfg->color << BMI_CMD_ATTR_COLOR_SHIFT;
-+        if (cfg->sync_req)
-+            tmp |= BMI_CMD_ATTR_SYNC;
-+    }
-+    iowrite32be(tmp, &regs->fmbm_rfca);
-+
-+    /* NIA */
-+    if (port->im_en)
-+        tmp = NIA_ENG_FM_CTL | NIA_FM_CTL_AC_IND_MODE_RX;
-+    else
-+    {
-+        tmp = (uint32_t)cfg->rx_fd_bits << BMI_NEXT_ENG_FD_BITS_SHIFT;
-+        tmp |= get_no_pcd_nia_bmi_ac_enc_frame(cfg);
-+    }
-+    iowrite32be(tmp, &regs->fmbm_rfne);
-+
-+    /* Enqueue NIA */
-+    iowrite32be(NIA_ENG_QMI_ENQ | NIA_ORDER_RESTOR, &regs->fmbm_rfene);
-+
-+    /* Default/error queues */
-+    if (!port->im_en)
-+    {
-+        iowrite32be((params->dflt_fqid & 0x00FFFFFF), &regs->fmbm_rfqid);
-+        iowrite32be((params->err_fqid & 0x00FFFFFF), &regs->fmbm_refqid);
-+    }
-+
-+    /* Discard/error masks */
-+    iowrite32be(params->discard_mask, &regs->fmbm_rfsdm);
-+    iowrite32be(params->err_mask, &regs->fmbm_rfsem);
-+
-+    /* Statistics counters */
-+    tmp = 0;
-+    if (cfg->stats_counters_enable)
-+        tmp = BMI_COUNTERS_EN;
-+    iowrite32be(tmp, &regs->fmbm_rstc);
-+
-+    /* Performance counters */
-+    fman_port_set_perf_cnt_params(port, &cfg->perf_cnt_params);
-+    tmp = 0;
-+    if (cfg->perf_counters_enable)
-+        tmp = BMI_COUNTERS_EN;
-+    iowrite32be(tmp, &regs->fmbm_rpc);
-+
-+    return 0;
-+}
-+
-+static int init_bmi_tx(struct fman_port *port,
-+        struct fman_port_cfg *cfg,
-+        struct fman_port_params *params)
-+{
-+    struct fman_port_tx_bmi_regs *regs = &port->bmi_regs->tx;
-+    uint32_t tmp;
-+
-+    /* Tx Configuration register */
-+    tmp = 0;
-+    if (port->im_en)
-+        tmp |= BMI_PORT_CFG_IM;
-+    iowrite32be(tmp, &regs->fmbm_tcfg);
-+
-+    /* DMA attributes */
-+    tmp = (uint32_t)cfg->dma_swap_data << BMI_DMA_ATTR_SWP_SHIFT;
-+    if (cfg->dma_ic_stash_on)
-+        tmp |= BMI_DMA_ATTR_IC_STASH_ON;
-+    if (cfg->dma_header_stash_on)
-+        tmp |= BMI_DMA_ATTR_HDR_STASH_ON;
-+    if (cfg->dma_sg_stash_on)
-+        tmp |= BMI_DMA_ATTR_SG_STASH_ON;
-+    iowrite32be(tmp, &regs->fmbm_tda);
-+
-+    /* Tx FIFO parameters */
-+    tmp = (cfg->tx_fifo_min_level / FMAN_PORT_BMI_FIFO_UNITS) <<
-+            BMI_TX_FIFO_MIN_FILL_SHIFT;
-+    tmp |= ((uint32_t)cfg->tx_fifo_deq_pipeline_depth - 1) <<
-+            BMI_FIFO_PIPELINE_DEPTH_SHIFT;
-+    tmp |= (uint32_t)(cfg->tx_fifo_low_comf_level /
-+            FMAN_PORT_BMI_FIFO_UNITS - 1);
-+    iowrite32be(tmp, &regs->fmbm_tfp);
-+
-+    /* Frame end data */
-+    tmp = (uint32_t)cfg->checksum_bytes_ignore <<
-+            BMI_FRAME_END_CS_IGNORE_SHIFT;
-+    iowrite32be(tmp, &regs->fmbm_tfed);
-+
-+    /* Internal context parameters */
-+    if (!port->im_en)
-+    {
-+        tmp = ((uint32_t)cfg->ic_ext_offset / FMAN_PORT_IC_OFFSET_UNITS) <<
-+                BMI_IC_TO_EXT_SHIFT;
-+        tmp |= ((uint32_t)cfg->ic_int_offset / FMAN_PORT_IC_OFFSET_UNITS) <<
-+                BMI_IC_FROM_INT_SHIFT;
-+        tmp |= cfg->ic_size / FMAN_PORT_IC_OFFSET_UNITS;
-+        iowrite32be(tmp, &regs->fmbm_ticp);
-+    }
-+    /* Frame attributes */
-+    tmp = BMI_CMD_TX_MR_DEF;
-+    if (port->im_en)
-+        tmp |= BMI_CMD_MR_DEAS;
-+    else
-+    {
-+        tmp |= BMI_CMD_ATTR_ORDER;
-+        tmp |= (uint32_t)cfg->color << BMI_CMD_ATTR_COLOR_SHIFT;
-+    }
-+    iowrite32be(tmp, &regs->fmbm_tfca);
-+
-+    /* Dequeue NIA + enqueue NIA */
-+    if (port->im_en)
-+    {
-+        iowrite32be(NIA_ENG_FM_CTL | NIA_FM_CTL_AC_IND_MODE_TX, &regs->fmbm_tfdne);
-+        iowrite32be(NIA_ENG_FM_CTL | NIA_FM_CTL_AC_IND_MODE_TX, &regs->fmbm_tfene);
-+    }
-+    else
-+    {
-+        iowrite32be(NIA_ENG_QMI_DEQ, &regs->fmbm_tfdne);
-+        iowrite32be(NIA_ENG_QMI_ENQ | NIA_ORDER_RESTOR, &regs->fmbm_tfene);
-+        if (cfg->fmbm_tfne_has_features)
-+            iowrite32be(!params->dflt_fqid ?
-+                BMI_EBD_EN | NIA_BMI_AC_FETCH_ALL_FRAME :
-+                NIA_BMI_AC_FETCH_ALL_FRAME, &regs->fmbm_tfne);
-+        if (!params->dflt_fqid && params->dont_release_buf)
-+        {
-+            iowrite32be(0x00FFFFFF, &regs->fmbm_tcfqid);
-+            iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_TX_RELEASE, &regs->fmbm_tfene);
-+            if (cfg->fmbm_tfne_has_features)
-+                iowrite32be(ioread32be(&regs->fmbm_tfne) & ~BMI_EBD_EN, &regs->fmbm_tfne);
-+        }
-+    }
-+
-+    /* Confirmation/error queues */
-+    if (!port->im_en)
-+    {
-+        if (params->dflt_fqid || !params->dont_release_buf)
-+            iowrite32be(params->dflt_fqid & 0x00FFFFFF, &regs->fmbm_tcfqid);
-+        iowrite32be((params->err_fqid & 0x00FFFFFF), &regs->fmbm_tefqid);
-+    }
-+    /* Statistics counters */
-+    tmp = 0;
-+    if (cfg->stats_counters_enable)
-+        tmp = BMI_COUNTERS_EN;
-+    iowrite32be(tmp, &regs->fmbm_tstc);
-+
-+    /* Performance counters */
-+    fman_port_set_perf_cnt_params(port, &cfg->perf_cnt_params);
-+    tmp = 0;
-+    if (cfg->perf_counters_enable)
-+        tmp = BMI_COUNTERS_EN;
-+    iowrite32be(tmp, &regs->fmbm_tpc);
-+
-+    return 0;
-+}
-+
-+static int init_bmi_oh(struct fman_port *port,
-+        struct fman_port_cfg *cfg,
-+        struct fman_port_params *params)
-+{
-+    struct fman_port_oh_bmi_regs *regs = &port->bmi_regs->oh;
-+    uint32_t tmp;
-+
-+    /* OP Configuration register */
-+    tmp = 0;
-+    if (cfg->discard_override)
-+        tmp |= BMI_PORT_CFG_FDOVR;
-+    iowrite32be(tmp, &regs->fmbm_ocfg);
-+
-+    /* DMA attributes */
-+    tmp = (uint32_t)cfg->dma_swap_data << BMI_DMA_ATTR_SWP_SHIFT;
-+    if (cfg->dma_ic_stash_on)
-+        tmp |= BMI_DMA_ATTR_IC_STASH_ON;
-+    if (cfg->dma_header_stash_on)
-+        tmp |= BMI_DMA_ATTR_HDR_STASH_ON;
-+    if (cfg->dma_sg_stash_on)
-+        tmp |= BMI_DMA_ATTR_SG_STASH_ON;
-+    if (cfg->dma_write_optimize)
-+        tmp |= BMI_DMA_ATTR_WRITE_OPTIMIZE;
-+    iowrite32be(tmp, &regs->fmbm_oda);
-+
-+    /* Tx FIFO parameters */
-+    tmp = ((uint32_t)cfg->tx_fifo_deq_pipeline_depth - 1) <<
-+            BMI_FIFO_PIPELINE_DEPTH_SHIFT;
-+    iowrite32be(tmp, &regs->fmbm_ofp);
-+
-+    /* Internal context parameters */
-+    tmp = ((uint32_t)cfg->ic_ext_offset / FMAN_PORT_IC_OFFSET_UNITS) <<
-+            BMI_IC_TO_EXT_SHIFT;
-+    tmp |= ((uint32_t)cfg->ic_int_offset / FMAN_PORT_IC_OFFSET_UNITS) <<
-+            BMI_IC_FROM_INT_SHIFT;
-+    tmp |= cfg->ic_size / FMAN_PORT_IC_OFFSET_UNITS;
-+    iowrite32be(tmp, &regs->fmbm_oicp);
-+
-+    /* Frame attributes */
-+    tmp = BMI_CMD_OP_MR_DEF;
-+    tmp |= (uint32_t)cfg->color << BMI_CMD_ATTR_COLOR_SHIFT;
-+    if (cfg->sync_req)
-+        tmp |= BMI_CMD_ATTR_SYNC;
-+    if (port->type == E_FMAN_PORT_TYPE_OP)
-+        tmp |= BMI_CMD_ATTR_ORDER;
-+    iowrite32be(tmp, &regs->fmbm_ofca);
-+
-+    /* Internal buffer offset */
-+    tmp = ((uint32_t)cfg->int_buf_start_margin / FMAN_PORT_IC_OFFSET_UNITS)
-+            << BMI_INT_BUF_MARG_SHIFT;
-+    iowrite32be(tmp, &regs->fmbm_oim);
-+
-+    /* Dequeue NIA */
-+    iowrite32be(NIA_ENG_QMI_DEQ, &regs->fmbm_ofdne);
-+
-+    /* NIA and Enqueue NIA */
-+    if (port->type == E_FMAN_PORT_TYPE_HC) {
-+        iowrite32be(NIA_ENG_FM_CTL | NIA_FM_CTL_AC_HC,
-+                &regs->fmbm_ofne);
-+        iowrite32be(NIA_ENG_QMI_ENQ, &regs->fmbm_ofene);
-+    } else {
-+        iowrite32be(get_no_pcd_nia_bmi_ac_enc_frame(cfg),
-+                &regs->fmbm_ofne);
-+        iowrite32be(NIA_ENG_QMI_ENQ | NIA_ORDER_RESTOR,
-+                &regs->fmbm_ofene);
-+    }
-+
-+    /* Default/error queues */
-+    iowrite32be((params->dflt_fqid & 0x00FFFFFF), &regs->fmbm_ofqid);
-+    iowrite32be((params->err_fqid & 0x00FFFFFF), &regs->fmbm_oefqid);
-+
-+    /* Discard/error masks */
-+    if (port->type == E_FMAN_PORT_TYPE_OP) {
-+        iowrite32be(params->discard_mask, &regs->fmbm_ofsdm);
-+        iowrite32be(params->err_mask, &regs->fmbm_ofsem);
-+    }
-+
-+    /* Statistics counters */
-+    tmp = 0;
-+    if (cfg->stats_counters_enable)
-+        tmp = BMI_COUNTERS_EN;
-+    iowrite32be(tmp, &regs->fmbm_ostc);
-+
-+    /* Performance counters */
-+    fman_port_set_perf_cnt_params(port, &cfg->perf_cnt_params);
-+    tmp = 0;
-+    if (cfg->perf_counters_enable)
-+        tmp = BMI_COUNTERS_EN;
-+    iowrite32be(tmp, &regs->fmbm_opc);
-+
-+    return 0;
-+}
-+
-+static int init_qmi(struct fman_port *port,
-+        struct fman_port_cfg *cfg,
-+        struct fman_port_params *params)
-+{
-+    struct fman_port_qmi_regs *regs = port->qmi_regs;
-+    uint32_t tmp;
-+
-+    tmp = 0;
-+    if (cfg->queue_counters_enable)
-+        tmp |= QMI_PORT_CFG_EN_COUNTERS;
-+    iowrite32be(tmp, &regs->fmqm_pnc);
-+
-+    /* Rx port configuration */
-+    if ((port->type == E_FMAN_PORT_TYPE_RX) ||
-+            (port->type == E_FMAN_PORT_TYPE_RX_10G)) {
-+        /* Enqueue NIA */
-+        iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_RELEASE, &regs->fmqm_pnen);
-+        return 0;
-+    }
-+
-+    /* Continue with Tx and O/H port configuration */
-+    if ((port->type == E_FMAN_PORT_TYPE_TX) ||
-+            (port->type == E_FMAN_PORT_TYPE_TX_10G)) {
-+        /* Enqueue NIA */
-+        iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_TX_RELEASE,
-+                &regs->fmqm_pnen);
-+        /* Dequeue NIA */
-+        iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_TX, &regs->fmqm_pndn);
-+    } else {
-+        /* Enqueue NIA */
-+        iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_RELEASE, &regs->fmqm_pnen);
-+        /* Dequeue NIA */
-+        iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_FETCH, &regs->fmqm_pndn);
-+    }
-+
-+    /* Dequeue Configuration register */
-+    tmp = 0;
-+    if (cfg->deq_high_pri)
-+        tmp |= QMI_DEQ_CFG_PRI;
-+
-+    switch (cfg->deq_type) {
-+    case E_FMAN_PORT_DEQ_BY_PRI:
-+        tmp |= QMI_DEQ_CFG_TYPE1;
-+        break;
-+    case E_FMAN_PORT_DEQ_ACTIVE_FQ:
-+        tmp |= QMI_DEQ_CFG_TYPE2;
-+        break;
-+    case E_FMAN_PORT_DEQ_ACTIVE_FQ_NO_ICS:
-+        tmp |= QMI_DEQ_CFG_TYPE3;
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    if (cfg->qmi_deq_options_support) {
-+        if ((port->type == E_FMAN_PORT_TYPE_HC) &&
-+            (cfg->deq_prefetch_opt != E_FMAN_PORT_DEQ_NO_PREFETCH))
-+            return -EINVAL;
-+
-+        switch (cfg->deq_prefetch_opt) {
-+        case E_FMAN_PORT_DEQ_NO_PREFETCH:
-+            break;
-+        case E_FMAN_PORT_DEQ_PART_PREFETCH:
-+            tmp |= QMI_DEQ_CFG_PREFETCH_PARTIAL;
-+            break;
-+        case E_FMAN_PORT_DEQ_FULL_PREFETCH:
-+            tmp |= QMI_DEQ_CFG_PREFETCH_FULL;
-+            break;
-+        default:
-+            return -EINVAL;
-+        }
-+    }
-+    tmp |= (uint32_t)(params->deq_sp & QMI_DEQ_CFG_SP_MASK) <<
-+            QMI_DEQ_CFG_SP_SHIFT;
-+    tmp |= cfg->deq_byte_cnt;
-+    iowrite32be(tmp, &regs->fmqm_pndc);
-+
-+    return 0;
-+}
-+
-+static void get_rx_stats_reg(struct fman_port *port,
-+        enum fman_port_stats_counters counter,
-+        uint32_t **stats_reg)
-+{
-+    struct fman_port_rx_bmi_regs *regs = &port->bmi_regs->rx;
-+
-+    switch (counter) {
-+    case E_FMAN_PORT_STATS_CNT_FRAME:
-+        *stats_reg = &regs->fmbm_rfrc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_DISCARD:
-+        *stats_reg = &regs->fmbm_rfdc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_DEALLOC_BUF:
-+        *stats_reg = &regs->fmbm_rbdc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_RX_BAD_FRAME:
-+        *stats_reg = &regs->fmbm_rfbc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_RX_LARGE_FRAME:
-+        *stats_reg = &regs->fmbm_rlfc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_RX_OUT_OF_BUF:
-+        *stats_reg = &regs->fmbm_rodc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_FILTERED_FRAME:
-+        *stats_reg = &regs->fmbm_rffc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_DMA_ERR:
-+        *stats_reg = &regs->fmbm_rfldec;
-+        break;
-+    default:
-+        *stats_reg = NULL;
-+    }
-+}
-+
-+static void get_tx_stats_reg(struct fman_port *port,
-+        enum fman_port_stats_counters counter,
-+        uint32_t **stats_reg)
-+{
-+    struct fman_port_tx_bmi_regs *regs = &port->bmi_regs->tx;
-+
-+    switch (counter) {
-+    case E_FMAN_PORT_STATS_CNT_FRAME:
-+        *stats_reg = &regs->fmbm_tfrc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_DISCARD:
-+        *stats_reg = &regs->fmbm_tfdc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_DEALLOC_BUF:
-+        *stats_reg = &regs->fmbm_tbdc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_LEN_ERR:
-+        *stats_reg = &regs->fmbm_tfledc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_UNSUPPORTED_FORMAT:
-+        *stats_reg = &regs->fmbm_tfufdc;
-+        break;
-+    default:
-+        *stats_reg = NULL;
-+    }
-+}
-+
-+static void get_oh_stats_reg(struct fman_port *port,
-+        enum fman_port_stats_counters counter,
-+        uint32_t **stats_reg)
-+{
-+    struct fman_port_oh_bmi_regs *regs = &port->bmi_regs->oh;
-+
-+    switch (counter) {
-+    case E_FMAN_PORT_STATS_CNT_FRAME:
-+        *stats_reg = &regs->fmbm_ofrc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_DISCARD:
-+        *stats_reg = &regs->fmbm_ofdc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_DEALLOC_BUF:
-+        *stats_reg = &regs->fmbm_obdc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_FILTERED_FRAME:
-+        *stats_reg = &regs->fmbm_offc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_DMA_ERR:
-+        *stats_reg = &regs->fmbm_ofldec;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_LEN_ERR:
-+        *stats_reg = &regs->fmbm_ofledc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_UNSUPPORTED_FORMAT:
-+        *stats_reg = &regs->fmbm_ofufdc;
-+        break;
-+    case E_FMAN_PORT_STATS_CNT_WRED_DISCARD:
-+        *stats_reg = &regs->fmbm_ofwdc;
-+        break;
-+    default:
-+        *stats_reg = NULL;
-+    }
-+}
-+
-+static void get_rx_perf_reg(struct fman_port *port,
-+        enum fman_port_perf_counters counter,
-+        uint32_t **perf_reg)
-+{
-+    struct fman_port_rx_bmi_regs *regs = &port->bmi_regs->rx;
-+
-+    switch (counter) {
-+    case E_FMAN_PORT_PERF_CNT_CYCLE:
-+        *perf_reg = &regs->fmbm_rccn;
-+        break;
-+    case E_FMAN_PORT_PERF_CNT_TASK_UTIL:
-+        *perf_reg = &regs->fmbm_rtuc;
-+        break;
-+    case E_FMAN_PORT_PERF_CNT_QUEUE_UTIL:
-+        *perf_reg = &regs->fmbm_rrquc;
-+        break;
-+    case E_FMAN_PORT_PERF_CNT_DMA_UTIL:
-+        *perf_reg = &regs->fmbm_rduc;
-+        break;
-+    case E_FMAN_PORT_PERF_CNT_FIFO_UTIL:
-+        *perf_reg = &regs->fmbm_rfuc;
-+        break;
-+    case E_FMAN_PORT_PERF_CNT_RX_PAUSE:
-+        *perf_reg = &regs->fmbm_rpac;
-+        break;
-+    default:
-+        *perf_reg = NULL;
-+    }
-+}
-+
-+static void get_tx_perf_reg(struct fman_port *port,
-+        enum fman_port_perf_counters counter,
-+        uint32_t **perf_reg)
-+{
-+    struct fman_port_tx_bmi_regs *regs = &port->bmi_regs->tx;
-+
-+    switch (counter) {
-+    case E_FMAN_PORT_PERF_CNT_CYCLE:
-+        *perf_reg = &regs->fmbm_tccn;
-+        break;
-+    case E_FMAN_PORT_PERF_CNT_TASK_UTIL:
-+        *perf_reg = &regs->fmbm_ttuc;
-+        break;
-+    case E_FMAN_PORT_PERF_CNT_QUEUE_UTIL:
-+        *perf_reg = &regs->fmbm_ttcquc;
-+        break;
-+    case E_FMAN_PORT_PERF_CNT_DMA_UTIL:
-+        *perf_reg = &regs->fmbm_tduc;
-+        break;
-+    case E_FMAN_PORT_PERF_CNT_FIFO_UTIL:
-+        *perf_reg = &regs->fmbm_tfuc;
-+        break;
-+    default:
-+        *perf_reg = NULL;
-+    }
-+}
-+
-+static void get_oh_perf_reg(struct fman_port *port,
-+        enum fman_port_perf_counters counter,
-+        uint32_t **perf_reg)
-+{
-+    struct fman_port_oh_bmi_regs *regs = &port->bmi_regs->oh;
-+
-+    switch (counter) {
-+    case E_FMAN_PORT_PERF_CNT_CYCLE:
-+        *perf_reg = &regs->fmbm_occn;
-+        break;
-+    case E_FMAN_PORT_PERF_CNT_TASK_UTIL:
-+        *perf_reg = &regs->fmbm_otuc;
-+        break;
-+    case E_FMAN_PORT_PERF_CNT_DMA_UTIL:
-+        *perf_reg = &regs->fmbm_oduc;
-+        break;
-+    case E_FMAN_PORT_PERF_CNT_FIFO_UTIL:
-+        *perf_reg = &regs->fmbm_ofuc;
-+        break;
-+    default:
-+        *perf_reg = NULL;
-+    }
-+}
-+
-+static void get_qmi_counter_reg(struct fman_port *port,
-+        enum fman_port_qmi_counters  counter,
-+        uint32_t **queue_reg)
-+{
-+    struct fman_port_qmi_regs *regs = port->qmi_regs;
-+
-+    switch (counter) {
-+    case E_FMAN_PORT_ENQ_TOTAL:
-+        *queue_reg = &regs->fmqm_pnetfc;
-+        break;
-+    case E_FMAN_PORT_DEQ_TOTAL:
-+        if ((port->type == E_FMAN_PORT_TYPE_RX) ||
-+                (port->type == E_FMAN_PORT_TYPE_RX_10G))
-+            /* Counter not available for Rx ports */
-+            *queue_reg = NULL;
-+        else
-+            *queue_reg = &regs->fmqm_pndtfc;
-+        break;
-+    case E_FMAN_PORT_DEQ_FROM_DFLT:
-+        if ((port->type == E_FMAN_PORT_TYPE_RX) ||
-+                (port->type == E_FMAN_PORT_TYPE_RX_10G))
-+            /* Counter not available for Rx ports */
-+            *queue_reg = NULL;
-+        else
-+            *queue_reg = &regs->fmqm_pndfdc;
-+        break;
-+    case E_FMAN_PORT_DEQ_CONFIRM:
-+        if ((port->type == E_FMAN_PORT_TYPE_RX) ||
-+                (port->type == E_FMAN_PORT_TYPE_RX_10G))
-+            /* Counter not available for Rx ports */
-+            *queue_reg = NULL;
-+        else
-+            *queue_reg = &regs->fmqm_pndcc;
-+        break;
-+    default:
-+        *queue_reg = NULL;
-+    }
-+}
-+
-+void fman_port_defconfig(struct fman_port_cfg *cfg, enum fman_port_type type)
-+{
-+    cfg->dma_swap_data = E_FMAN_PORT_DMA_NO_SWAP;
-+    cfg->dma_ic_stash_on = FALSE;
-+    cfg->dma_header_stash_on = FALSE;
-+    cfg->dma_sg_stash_on = FALSE;
-+    cfg->dma_write_optimize = TRUE;
-+    cfg->color = E_FMAN_PORT_COLOR_GREEN;
-+    cfg->discard_override = FALSE;
-+    cfg->checksum_bytes_ignore = 0;
-+    cfg->rx_cut_end_bytes = 4;
-+    cfg->rx_pri_elevation = ((0x3FF + 1) * FMAN_PORT_BMI_FIFO_UNITS);
-+    cfg->rx_fifo_thr = ((0x3FF + 1) * FMAN_PORT_BMI_FIFO_UNITS);
-+    cfg->rx_fd_bits = 0;
-+    cfg->ic_ext_offset = 0;
-+    cfg->ic_int_offset = 0;
-+    cfg->ic_size = 0;
-+    cfg->int_buf_start_margin = 0;
-+    cfg->ext_buf_start_margin = 0;
-+    cfg->ext_buf_end_margin = 0;
-+    cfg->tx_fifo_min_level  = 0;
-+    cfg->tx_fifo_low_comf_level = (5 * KILOBYTE);
-+    cfg->stats_counters_enable = TRUE;
-+    cfg->perf_counters_enable = TRUE;
-+    cfg->deq_type = E_FMAN_PORT_DEQ_BY_PRI;
-+
-+    if (type == E_FMAN_PORT_TYPE_HC) {
-+        cfg->sync_req = FALSE;
-+        cfg->deq_prefetch_opt = E_FMAN_PORT_DEQ_NO_PREFETCH;
-+    } else {
-+        cfg->sync_req = TRUE;
-+        cfg->deq_prefetch_opt = E_FMAN_PORT_DEQ_FULL_PREFETCH;
-+    }
-+
-+    if (type == E_FMAN_PORT_TYPE_TX_10G) {
-+        cfg->tx_fifo_deq_pipeline_depth = 4;
-+        cfg->deq_high_pri = TRUE;
-+        cfg->deq_byte_cnt = 0x1400;
-+    } else {
-+        if ((type == E_FMAN_PORT_TYPE_HC) ||
-+                (type == E_FMAN_PORT_TYPE_OP))
-+            cfg->tx_fifo_deq_pipeline_depth = 2;
-+        else
-+            cfg->tx_fifo_deq_pipeline_depth = 1;
-+
-+        cfg->deq_high_pri = FALSE;
-+        cfg->deq_byte_cnt = 0x400;
-+    }
-+    cfg->no_scatter_gather = DEFAULT_FMAN_SP_NO_SCATTER_GATHER;
-+}
-+
-+static uint8_t fman_port_find_bpool(struct fman_port *port, uint8_t bpid)
-+{
-+    uint32_t *bp_reg, tmp;
-+    uint8_t i, id;
-+
-+    /* Find the pool */
-+    bp_reg = port->bmi_regs->rx.fmbm_ebmpi;
-+    for (i = 0;
-+         (i < port->ext_pools_num && (i < FMAN_PORT_MAX_EXT_POOLS_NUM));
-+         i++) {
-+        tmp = ioread32be(&bp_reg[i]);
-+        id = (uint8_t)((tmp & BMI_EXT_BUF_POOL_ID_MASK) >>
-+                BMI_EXT_BUF_POOL_ID_SHIFT);
-+
-+        if (id == bpid)
-+            break;
-+    }
-+
-+    return i;
-+}
-+
-+int fman_port_init(struct fman_port *port,
-+        struct fman_port_cfg *cfg,
-+        struct fman_port_params *params)
-+{
-+    int err;
-+
-+    /* Init BMI registers */
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        err = init_bmi_rx(port, cfg, params);
-+        break;
-+    case E_FMAN_PORT_TYPE_TX:
-+    case E_FMAN_PORT_TYPE_TX_10G:
-+        err = init_bmi_tx(port, cfg, params);
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+    case E_FMAN_PORT_TYPE_HC:
-+        err = init_bmi_oh(port, cfg, params);
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    if (err)
-+        return err;
-+
-+    /* Init QMI registers */
-+    if (!port->im_en)
-+    {
-+        err = init_qmi(port, cfg, params);
-+        return err;
-+    }
-+    return 0;
-+}
-+
-+int fman_port_enable(struct fman_port *port)
-+{
-+    uint32_t *bmi_cfg_reg, tmp;
-+    bool rx_port;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        bmi_cfg_reg = &port->bmi_regs->rx.fmbm_rcfg;
-+        rx_port = TRUE;
-+        break;
-+    case E_FMAN_PORT_TYPE_TX:
-+    case E_FMAN_PORT_TYPE_TX_10G:
-+        bmi_cfg_reg = &port->bmi_regs->tx.fmbm_tcfg;
-+        rx_port = FALSE;
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+    case E_FMAN_PORT_TYPE_HC:
-+        bmi_cfg_reg = &port->bmi_regs->oh.fmbm_ocfg;
-+        rx_port = FALSE;
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    /* Enable QMI */
-+    if (!rx_port) {
-+        tmp = ioread32be(&port->qmi_regs->fmqm_pnc) | QMI_PORT_CFG_EN;
-+        iowrite32be(tmp, &port->qmi_regs->fmqm_pnc);
-+    }
-+
-+    /* Enable BMI */
-+    tmp = ioread32be(bmi_cfg_reg) | BMI_PORT_CFG_EN;
-+    iowrite32be(tmp, bmi_cfg_reg);
-+
-+    return 0;
-+}
-+
-+int fman_port_disable(const struct fman_port *port)
-+{
-+    uint32_t *bmi_cfg_reg, *bmi_status_reg, tmp;
-+    bool rx_port, failure = FALSE;
-+    int count;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        bmi_cfg_reg = &port->bmi_regs->rx.fmbm_rcfg;
-+        bmi_status_reg = &port->bmi_regs->rx.fmbm_rst;
-+        rx_port = TRUE;
-+        break;
-+    case E_FMAN_PORT_TYPE_TX:
-+    case E_FMAN_PORT_TYPE_TX_10G:
-+        bmi_cfg_reg = &port->bmi_regs->tx.fmbm_tcfg;
-+        bmi_status_reg = &port->bmi_regs->tx.fmbm_tst;
-+        rx_port = FALSE;
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+    case E_FMAN_PORT_TYPE_HC:
-+        bmi_cfg_reg = &port->bmi_regs->oh.fmbm_ocfg;
-+        bmi_status_reg = &port->bmi_regs->oh.fmbm_ost;
-+        rx_port = FALSE;
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    /* Disable QMI */
-+    if (!rx_port) {
-+        tmp = ioread32be(&port->qmi_regs->fmqm_pnc) & ~QMI_PORT_CFG_EN;
-+        iowrite32be(tmp, &port->qmi_regs->fmqm_pnc);
-+
-+        /* Wait for QMI to finish FD handling */
-+        count = 100;
-+        do {
-+            udelay(10);
-+            tmp = ioread32be(&port->qmi_regs->fmqm_pns);
-+        } while ((tmp & QMI_PORT_STATUS_DEQ_FD_BSY) && --count);
-+
-+        if (count == 0)
-+        {
-+            /* Timeout */
-+            failure = TRUE;
-+        }
-+    }
-+
-+    /* Disable BMI */
-+    tmp = ioread32be(bmi_cfg_reg) & ~BMI_PORT_CFG_EN;
-+    iowrite32be(tmp, bmi_cfg_reg);
-+
-+    /* Wait for graceful stop end */
-+    count = 500;
-+    do {
-+        udelay(10);
-+        tmp = ioread32be(bmi_status_reg);
-+    } while ((tmp & BMI_PORT_STATUS_BSY) && --count);
-+
-+    if (count == 0)
-+    {
-+        /* Timeout */
-+        failure = TRUE;
-+    }
-+
-+    if (failure)
-+        return -EBUSY;
-+
-+    return 0;
-+}
-+
-+int fman_port_set_bpools(const struct fman_port *port,
-+        const struct fman_port_bpools *bp)
-+{
-+    uint32_t tmp, *bp_reg, *bp_depl_reg;
-+    uint8_t i, max_bp_num;
-+    bool grp_depl_used = FALSE, rx_port;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        max_bp_num = port->ext_pools_num;
-+        rx_port = TRUE;
-+        bp_reg = port->bmi_regs->rx.fmbm_ebmpi;
-+        bp_depl_reg = &port->bmi_regs->rx.fmbm_mpd;
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+        if (port->fm_rev_maj != 4)
-+            return -EINVAL;
-+        max_bp_num = FMAN_PORT_OBS_EXT_POOLS_NUM;
-+        rx_port = FALSE;
-+        bp_reg = port->bmi_regs->oh.fmbm_oebmpi;
-+        bp_depl_reg = &port->bmi_regs->oh.fmbm_ompd;
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    if (rx_port) {
-+        /* Check buffers are provided in ascending order */
-+        for (i = 0;
-+             (i < (bp->count-1) && (i < FMAN_PORT_MAX_EXT_POOLS_NUM - 1));
-+             i++) {
-+            if (bp->bpool[i].size > bp->bpool[i+1].size)
-+                return -EINVAL;
-+        }
-+    }
-+
-+    /* Set up external buffers pools */
-+    for (i = 0; i < bp->count; i++) {
-+        tmp = BMI_EXT_BUF_POOL_VALID;
-+        tmp |= ((uint32_t)bp->bpool[i].bpid <<
-+            BMI_EXT_BUF_POOL_ID_SHIFT) & BMI_EXT_BUF_POOL_ID_MASK;
-+
-+        if (rx_port) {
-+            if (bp->counters_enable)
-+                tmp |= BMI_EXT_BUF_POOL_EN_COUNTER;
-+
-+            if (bp->bpool[i].is_backup)
-+                tmp |= BMI_EXT_BUF_POOL_BACKUP;
-+
-+            tmp |= (uint32_t)bp->bpool[i].size;
-+        }
-+
-+        iowrite32be(tmp, &bp_reg[i]);
-+    }
-+
-+    /* Clear unused pools */
-+    for (i = bp->count; i < max_bp_num; i++)
-+        iowrite32be(0, &bp_reg[i]);
-+
-+    /* Pools depletion */
-+    tmp = 0;
-+    for (i = 0; i < FMAN_PORT_MAX_EXT_POOLS_NUM; i++) {
-+        if (bp->bpool[i].grp_bp_depleted) {
-+            grp_depl_used = TRUE;
-+            tmp |= 0x80000000 >> i;
-+        }
-+
-+        if (bp->bpool[i].single_bp_depleted)
-+            tmp |= 0x80 >> i;
-+
-+        if (bp->bpool[i].pfc_priorities_en)
-+            tmp |= 0x0100 << i;
-+    }
-+
-+    if (grp_depl_used)
-+        tmp |= ((uint32_t)bp->grp_bp_depleted_num - 1) <<
-+            BMI_POOL_DEP_NUM_OF_POOLS_SHIFT;
-+
-+    iowrite32be(tmp, bp_depl_reg);
-+    return 0;
-+}
-+
-+int fman_port_set_rate_limiter(struct fman_port *port,
-+        struct fman_port_rate_limiter *rate_limiter)
-+{
-+    uint32_t *rate_limit_reg, *rate_limit_scale_reg;
-+    uint32_t granularity, tmp;
-+    uint8_t usec_bit, factor;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_TX:
-+    case E_FMAN_PORT_TYPE_TX_10G:
-+        rate_limit_reg = &port->bmi_regs->tx.fmbm_trlmt;
-+        rate_limit_scale_reg = &port->bmi_regs->tx.fmbm_trlmts;
-+        granularity = BMI_RATE_LIMIT_GRAN_TX;
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+        rate_limit_reg = &port->bmi_regs->oh.fmbm_orlmt;
-+        rate_limit_scale_reg = &port->bmi_regs->oh.fmbm_orlmts;
-+        granularity = BMI_RATE_LIMIT_GRAN_OP;
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    /* Factor is per 1 usec count */
-+    factor = 1;
-+    usec_bit = rate_limiter->count_1micro_bit;
-+
-+    /* If rate limit is too small for an 1usec factor, adjust timestamp
-+     * scale and multiply the factor */
-+    while (rate_limiter->rate < (granularity / factor)) {
-+        if (usec_bit == 31)
-+            /* Can't configure rate limiter - rate is too small */
-+            return -EINVAL;
-+
-+        usec_bit++;
-+        factor <<= 1;
-+    }
-+
-+    /* Figure out register value. The "while" above quarantees that
-+     * (rate_limiter->rate * factor / granularity) >= 1 */
-+    tmp = (uint32_t)(rate_limiter->rate * factor / granularity - 1);
-+
-+    /* Check rate limit isn't too large */
-+    if (tmp >= BMI_RATE_LIMIT_MAX_RATE_IN_GRAN_UNITS)
-+        return -EINVAL;
-+
-+    /* Check burst size is in allowed range */
-+    if ((rate_limiter->burst_size == 0) ||
-+            (rate_limiter->burst_size >
-+                BMI_RATE_LIMIT_MAX_BURST_SIZE))
-+        return -EINVAL;
-+
-+    tmp |= (uint32_t)(rate_limiter->burst_size - 1) <<
-+            BMI_RATE_LIMIT_MAX_BURST_SHIFT;
-+
-+    if ((port->type == E_FMAN_PORT_TYPE_OP) &&
-+            (port->fm_rev_maj == 4)) {
-+        if (rate_limiter->high_burst_size_gran)
-+            tmp |= BMI_RATE_LIMIT_HIGH_BURST_SIZE_GRAN;
-+    }
-+
-+    iowrite32be(tmp, rate_limit_reg);
-+
-+    /* Set up rate limiter scale register */
-+    tmp = BMI_RATE_LIMIT_SCALE_EN;
-+    tmp |= (31 - (uint32_t)usec_bit) << BMI_RATE_LIMIT_SCALE_TSBS_SHIFT;
-+
-+    if ((port->type == E_FMAN_PORT_TYPE_OP) &&
-+            (port->fm_rev_maj == 4))
-+        tmp |= rate_limiter->rate_factor;
-+
-+    iowrite32be(tmp, rate_limit_scale_reg);
-+
-+    return 0;
-+}
-+
-+int fman_port_delete_rate_limiter(struct fman_port *port)
-+{
-+    uint32_t *rate_limit_scale_reg;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_TX:
-+    case E_FMAN_PORT_TYPE_TX_10G:
-+        rate_limit_scale_reg = &port->bmi_regs->tx.fmbm_trlmts;
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+        rate_limit_scale_reg = &port->bmi_regs->oh.fmbm_orlmts;
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    iowrite32be(0, rate_limit_scale_reg);
-+    return 0;
-+}
-+
-+int fman_port_set_err_mask(struct fman_port *port, uint32_t err_mask)
-+{
-+    uint32_t *err_mask_reg;
-+
-+    /* Obtain register address */
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        err_mask_reg = &port->bmi_regs->rx.fmbm_rfsem;
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+        err_mask_reg = &port->bmi_regs->oh.fmbm_ofsem;
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    iowrite32be(err_mask, err_mask_reg);
-+    return 0;
-+}
-+
-+int fman_port_set_discard_mask(struct fman_port *port, uint32_t discard_mask)
-+{
-+    uint32_t *discard_mask_reg;
-+
-+    /* Obtain register address */
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        discard_mask_reg = &port->bmi_regs->rx.fmbm_rfsdm;
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+        discard_mask_reg = &port->bmi_regs->oh.fmbm_ofsdm;
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    iowrite32be(discard_mask, discard_mask_reg);
-+    return 0;
-+}
-+
-+int fman_port_modify_rx_fd_bits(struct fman_port *port,
-+        uint8_t rx_fd_bits,
-+        bool add)
-+{
-+    uint32_t    tmp;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    tmp = ioread32be(&port->bmi_regs->rx.fmbm_rfne);
-+
-+    if (add)
-+        tmp |= (uint32_t)rx_fd_bits << BMI_NEXT_ENG_FD_BITS_SHIFT;
-+    else
-+        tmp &= ~((uint32_t)rx_fd_bits << BMI_NEXT_ENG_FD_BITS_SHIFT);
-+
-+    iowrite32be(tmp, &port->bmi_regs->rx.fmbm_rfne);
-+    return 0;
-+}
-+
-+int fman_port_set_perf_cnt_params(struct fman_port *port,
-+        struct fman_port_perf_cnt_params *params)
-+{
-+    uint32_t *pcp_reg, tmp;
-+
-+    /* Obtain register address and check parameters are in range */
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        pcp_reg = &port->bmi_regs->rx.fmbm_rpcp;
-+        if ((params->queue_val == 0) ||
-+            (params->queue_val > MAX_PERFORMANCE_RX_QUEUE_COMP))
-+            return -EINVAL;
-+        break;
-+    case E_FMAN_PORT_TYPE_TX:
-+    case E_FMAN_PORT_TYPE_TX_10G:
-+        pcp_reg = &port->bmi_regs->tx.fmbm_tpcp;
-+        if ((params->queue_val == 0) ||
-+            (params->queue_val > MAX_PERFORMANCE_TX_QUEUE_COMP))
-+            return -EINVAL;
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+    case E_FMAN_PORT_TYPE_HC:
-+        pcp_reg = &port->bmi_regs->oh.fmbm_opcp;
-+        if (params->queue_val != 0)
-+            return -EINVAL;
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    if ((params->task_val == 0) ||
-+            (params->task_val > MAX_PERFORMANCE_TASK_COMP))
-+        return -EINVAL;
-+    if ((params->dma_val == 0) ||
-+            (params->dma_val > MAX_PERFORMANCE_DMA_COMP))
-+        return -EINVAL;
-+    if ((params->fifo_val == 0) ||
-+            ((params->fifo_val / FMAN_PORT_BMI_FIFO_UNITS) >
-+                MAX_PERFORMANCE_FIFO_COMP))
-+        return -EINVAL;
-+    tmp = (uint32_t)(params->task_val - 1) <<
-+            BMI_PERFORMANCE_TASK_COMP_SHIFT;
-+    tmp |= (uint32_t)(params->dma_val - 1) <<
-+            BMI_PERFORMANCE_DMA_COMP_SHIFT;
-+    tmp |= (uint32_t)(params->fifo_val / FMAN_PORT_BMI_FIFO_UNITS - 1);
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+    case E_FMAN_PORT_TYPE_TX:
-+    case E_FMAN_PORT_TYPE_TX_10G:
-+        tmp |= (uint32_t)(params->queue_val - 1) <<
-+            BMI_PERFORMANCE_QUEUE_COMP_SHIFT;
-+        break;
-+    default:
-+        break;
-+    }
-+
-+
-+    iowrite32be(tmp, pcp_reg);
-+    return 0;
-+}
-+
-+int fman_port_set_stats_cnt_mode(struct fman_port *port, bool enable)
-+{
-+    uint32_t *stats_reg, tmp;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        stats_reg = &port->bmi_regs->rx.fmbm_rstc;
-+        break;
-+    case E_FMAN_PORT_TYPE_TX:
-+    case E_FMAN_PORT_TYPE_TX_10G:
-+        stats_reg = &port->bmi_regs->tx.fmbm_tstc;
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+    case E_FMAN_PORT_TYPE_HC:
-+        stats_reg = &port->bmi_regs->oh.fmbm_ostc;
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    tmp = ioread32be(stats_reg);
-+
-+    if (enable)
-+        tmp |= BMI_COUNTERS_EN;
-+    else
-+        tmp &= ~BMI_COUNTERS_EN;
-+
-+    iowrite32be(tmp, stats_reg);
-+    return 0;
-+}
-+
-+int fman_port_set_perf_cnt_mode(struct fman_port *port, bool enable)
-+{
-+    uint32_t *stats_reg, tmp;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        stats_reg = &port->bmi_regs->rx.fmbm_rpc;
-+        break;
-+    case E_FMAN_PORT_TYPE_TX:
-+    case E_FMAN_PORT_TYPE_TX_10G:
-+        stats_reg = &port->bmi_regs->tx.fmbm_tpc;
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+    case E_FMAN_PORT_TYPE_HC:
-+        stats_reg = &port->bmi_regs->oh.fmbm_opc;
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    tmp = ioread32be(stats_reg);
-+
-+    if (enable)
-+        tmp |= BMI_COUNTERS_EN;
-+    else
-+        tmp &= ~BMI_COUNTERS_EN;
-+
-+    iowrite32be(tmp, stats_reg);
-+    return 0;
-+}
-+
-+int fman_port_set_queue_cnt_mode(struct fman_port *port, bool enable)
-+{
-+    uint32_t tmp;
-+
-+    tmp = ioread32be(&port->qmi_regs->fmqm_pnc);
-+
-+    if (enable)
-+        tmp |= QMI_PORT_CFG_EN_COUNTERS;
-+    else
-+        tmp &= ~QMI_PORT_CFG_EN_COUNTERS;
-+
-+    iowrite32be(tmp, &port->qmi_regs->fmqm_pnc);
-+    return 0;
-+}
-+
-+int fman_port_set_bpool_cnt_mode(struct fman_port *port,
-+        uint8_t bpid,
-+        bool enable)
-+{
-+    uint8_t index;
-+    uint32_t tmp;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    /* Find the pool */
-+    index = fman_port_find_bpool(port, bpid);
-+    if (index == port->ext_pools_num || index == FMAN_PORT_MAX_EXT_POOLS_NUM)
-+        /* Not found */
-+        return -EINVAL;
-+
-+    tmp = ioread32be(&port->bmi_regs->rx.fmbm_ebmpi[index]);
-+
-+    if (enable)
-+        tmp |= BMI_EXT_BUF_POOL_EN_COUNTER;
-+    else
-+        tmp &= ~BMI_EXT_BUF_POOL_EN_COUNTER;
-+
-+    iowrite32be(tmp, &port->bmi_regs->rx.fmbm_ebmpi[index]);
-+    return 0;
-+}
-+
-+uint32_t fman_port_get_stats_counter(struct fman_port *port,
-+        enum fman_port_stats_counters  counter)
-+{
-+    uint32_t *stats_reg, ret_val;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        get_rx_stats_reg(port, counter, &stats_reg);
-+        break;
-+    case E_FMAN_PORT_TYPE_TX:
-+    case E_FMAN_PORT_TYPE_TX_10G:
-+        get_tx_stats_reg(port, counter, &stats_reg);
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+    case E_FMAN_PORT_TYPE_HC:
-+        get_oh_stats_reg(port, counter, &stats_reg);
-+        break;
-+    default:
-+        stats_reg = NULL;
-+    }
-+
-+    if (stats_reg == NULL)
-+        return 0;
-+
-+    ret_val = ioread32be(stats_reg);
-+    return ret_val;
-+}
-+
-+void fman_port_set_stats_counter(struct fman_port *port,
-+        enum fman_port_stats_counters counter,
-+        uint32_t value)
-+{
-+    uint32_t *stats_reg;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        get_rx_stats_reg(port, counter, &stats_reg);
-+        break;
-+    case E_FMAN_PORT_TYPE_TX:
-+    case E_FMAN_PORT_TYPE_TX_10G:
-+        get_tx_stats_reg(port, counter, &stats_reg);
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+    case E_FMAN_PORT_TYPE_HC:
-+        get_oh_stats_reg(port, counter, &stats_reg);
-+        break;
-+    default:
-+        stats_reg = NULL;
-+    }
-+
-+    if (stats_reg == NULL)
-+        return;
-+
-+    iowrite32be(value, stats_reg);
-+}
-+
-+uint32_t fman_port_get_perf_counter(struct fman_port *port,
-+        enum fman_port_perf_counters counter)
-+{
-+    uint32_t *perf_reg, ret_val;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        get_rx_perf_reg(port, counter, &perf_reg);
-+        break;
-+    case E_FMAN_PORT_TYPE_TX:
-+    case E_FMAN_PORT_TYPE_TX_10G:
-+        get_tx_perf_reg(port, counter, &perf_reg);
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+    case E_FMAN_PORT_TYPE_HC:
-+        get_oh_perf_reg(port, counter, &perf_reg);
-+        break;
-+    default:
-+        perf_reg = NULL;
-+    }
-+
-+    if (perf_reg == NULL)
-+        return 0;
-+
-+    ret_val = ioread32be(perf_reg);
-+    return ret_val;
-+}
-+
-+void fman_port_set_perf_counter(struct fman_port *port,
-+        enum fman_port_perf_counters counter,
-+        uint32_t value)
-+{
-+    uint32_t *perf_reg;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        get_rx_perf_reg(port, counter, &perf_reg);
-+        break;
-+    case E_FMAN_PORT_TYPE_TX:
-+    case E_FMAN_PORT_TYPE_TX_10G:
-+        get_tx_perf_reg(port, counter, &perf_reg);
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+    case E_FMAN_PORT_TYPE_HC:
-+        get_oh_perf_reg(port, counter, &perf_reg);
-+        break;
-+    default:
-+        perf_reg = NULL;
-+    }
-+
-+    if (perf_reg == NULL)
-+        return;
-+
-+    iowrite32be(value, perf_reg);
-+}
-+
-+uint32_t fman_port_get_qmi_counter(struct fman_port *port,
-+        enum fman_port_qmi_counters  counter)
-+{
-+    uint32_t *queue_reg, ret_val;
-+
-+    get_qmi_counter_reg(port, counter, &queue_reg);
-+
-+    if (queue_reg == NULL)
-+        return 0;
-+
-+    ret_val = ioread32be(queue_reg);
-+    return ret_val;
-+}
-+
-+void fman_port_set_qmi_counter(struct fman_port *port,
-+        enum fman_port_qmi_counters counter,
-+        uint32_t value)
-+{
-+    uint32_t *queue_reg;
-+
-+    get_qmi_counter_reg(port, counter, &queue_reg);
-+
-+    if (queue_reg == NULL)
-+        return;
-+
-+    iowrite32be(value, queue_reg);
-+}
-+
-+uint32_t fman_port_get_bpool_counter(struct fman_port *port, uint8_t bpid)
-+{
-+    uint8_t index;
-+    uint32_t ret_val;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        break;
-+    default:
-+        return 0;
-+    }
-+
-+    /* Find the pool */
-+    index = fman_port_find_bpool(port, bpid);
-+    if (index == port->ext_pools_num || index == FMAN_PORT_MAX_EXT_POOLS_NUM)
-+        /* Not found */
-+        return 0;
-+
-+    ret_val = ioread32be(&port->bmi_regs->rx.fmbm_acnt[index]);
-+    return ret_val;
-+}
-+
-+void fman_port_set_bpool_counter(struct fman_port *port,
-+        uint8_t bpid,
-+        uint32_t value)
-+{
-+    uint8_t index;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        break;
-+    default:
-+        return;
-+    }
-+
-+    /* Find the pool */
-+    index = fman_port_find_bpool(port, bpid);
-+    if (index == port->ext_pools_num || index == FMAN_PORT_MAX_EXT_POOLS_NUM)
-+        /* Not found */
-+        return;
-+
-+    iowrite32be(value, &port->bmi_regs->rx.fmbm_acnt[index]);
-+}
-+
-+int fman_port_add_congestion_grps(struct fman_port *port,
-+        uint32_t grps_map[FMAN_PORT_CG_MAP_NUM])
-+{
-+    int i;
-+    uint32_t tmp, *grp_map_reg;
-+    uint8_t max_grp_map_num;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        if (port->fm_rev_maj == 4)
-+            max_grp_map_num = 1;
-+        else
-+            max_grp_map_num = FMAN_PORT_CG_MAP_NUM;
-+        grp_map_reg = port->bmi_regs->rx.fmbm_rcgm;
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+        max_grp_map_num = 1;
-+        if (port->fm_rev_maj != 4)
-+            return -EINVAL;
-+        grp_map_reg = port->bmi_regs->oh.fmbm_ocgm;
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    for (i = (max_grp_map_num - 1); i >= 0; i--) {
-+        if (grps_map[i] == 0)
-+            continue;
-+        tmp = ioread32be(&grp_map_reg[i]);
-+        tmp |= grps_map[i];
-+        iowrite32be(tmp, &grp_map_reg[i]);
-+    }
-+
-+    return 0;
-+}
-+
-+int fman_port_remove_congestion_grps(struct fman_port *port,
-+        uint32_t grps_map[FMAN_PORT_CG_MAP_NUM])
-+{
-+    int i;
-+    uint32_t tmp, *grp_map_reg;
-+    uint8_t max_grp_map_num;
-+
-+    switch (port->type) {
-+    case E_FMAN_PORT_TYPE_RX:
-+    case E_FMAN_PORT_TYPE_RX_10G:
-+        if (port->fm_rev_maj == 4)
-+            max_grp_map_num = 1;
-+        else
-+            max_grp_map_num = FMAN_PORT_CG_MAP_NUM;
-+        grp_map_reg = port->bmi_regs->rx.fmbm_rcgm;
-+        break;
-+    case E_FMAN_PORT_TYPE_OP:
-+        max_grp_map_num = 1;
-+        if (port->fm_rev_maj != 4)
-+            return -EINVAL;
-+        grp_map_reg = port->bmi_regs->oh.fmbm_ocgm;
-+        break;
-+    default:
-+        return -EINVAL;
-+    }
-+
-+    for (i = (max_grp_map_num - 1); i >= 0; i--) {
-+        if (grps_map[i] == 0)
-+            continue;
-+        tmp = ioread32be(&grp_map_reg[i]);
-+        tmp &= ~grps_map[i];
-+        iowrite32be(tmp, &grp_map_reg[i]);
-+    }
-+    return 0;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Rtc/Makefile
-@@ -0,0 +1,15 @@
-+#
-+# Makefile for the Freescale Ethernet controllers
-+#
-+ccflags-y           += -DVERSION=\"\"
-+#
-+#Include netcomm SW specific definitions
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+
-+NCSW_FM_INC = $(srctree)/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/inc
-+
-+ccflags-y += -I$(NCSW_FM_INC)
-+
-+obj-y		+= fsl-ncsw-RTC.o
-+
-+fsl-ncsw-RTC-objs	:=   fm_rtc.o fman_rtc.o
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Rtc/fm_rtc.c
-@@ -0,0 +1,692 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_rtc.c
-+
-+ @Description   FM RTC driver implementation.
-+
-+ @Cautions      None
-+*//***************************************************************************/
-+#include <linux/math64.h>
-+#include "error_ext.h"
-+#include "debug_ext.h"
-+#include "string_ext.h"
-+#include "part_ext.h"
-+#include "xx_ext.h"
-+#include "ncsw_ext.h"
-+
-+#include "fm_rtc.h"
-+#include "fm_common.h"
-+
-+
-+
-+/*****************************************************************************/
-+static t_Error CheckInitParameters(t_FmRtc *p_Rtc)
-+{
-+    struct rtc_cfg  *p_RtcDriverParam = p_Rtc->p_RtcDriverParam;
-+    int                 i;
-+
-+    if ((p_RtcDriverParam->src_clk != E_FMAN_RTC_SOURCE_CLOCK_EXTERNAL) &&
-+        (p_RtcDriverParam->src_clk != E_FMAN_RTC_SOURCE_CLOCK_SYSTEM) &&
-+        (p_RtcDriverParam->src_clk != E_FMAN_RTC_SOURCE_CLOCK_OSCILATOR))
-+        RETURN_ERROR(MAJOR, E_INVALID_CLOCK, ("Source clock undefined"));
-+
-+    if (p_Rtc->outputClockDivisor == 0)
-+    {
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("Divisor for output clock (should be positive)"));
-+    }
-+
-+    for (i=0; i < FM_RTC_NUM_OF_ALARMS; i++)
-+    {
-+        if ((p_RtcDriverParam->alarm_polarity[i] != E_FMAN_RTC_ALARM_POLARITY_ACTIVE_LOW) &&
-+            (p_RtcDriverParam->alarm_polarity[i] != E_FMAN_RTC_ALARM_POLARITY_ACTIVE_HIGH))
-+        {
-+            RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("Alarm %d signal polarity", i));
-+        }
-+    }
-+    for (i=0; i < FM_RTC_NUM_OF_EXT_TRIGGERS; i++)
-+    {
-+        if ((p_RtcDriverParam->trigger_polarity[i] != E_FMAN_RTC_TRIGGER_ON_FALLING_EDGE) &&
-+            (p_RtcDriverParam->trigger_polarity[i] != E_FMAN_RTC_TRIGGER_ON_RISING_EDGE))
-+        {
-+            RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("Trigger %d signal polarity", i));
-+        }
-+    }
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+static void RtcExceptions(t_Handle h_FmRtc)
-+{
-+    t_FmRtc             *p_Rtc = (t_FmRtc *)h_FmRtc;
-+    struct rtc_regs     *p_MemMap;
-+    register uint32_t   events;
-+
-+    ASSERT_COND(p_Rtc);
-+    p_MemMap = p_Rtc->p_MemMap;
-+
-+    events = fman_rtc_check_and_clear_event(p_MemMap);
-+    if (events & FMAN_RTC_TMR_TEVENT_ALM1)
-+    {
-+        if (p_Rtc->alarmParams[0].clearOnExpiration)
-+        {
-+            fman_rtc_set_timer_alarm_l(p_MemMap, 0, 0);
-+            fman_rtc_disable_interupt(p_MemMap, FMAN_RTC_TMR_TEVENT_ALM1);
-+        }
-+        ASSERT_COND(p_Rtc->alarmParams[0].f_AlarmCallback);
-+        p_Rtc->alarmParams[0].f_AlarmCallback(p_Rtc->h_App, 0);
-+    }
-+    if (events & FMAN_RTC_TMR_TEVENT_ALM2)
-+    {
-+        if (p_Rtc->alarmParams[1].clearOnExpiration)
-+        {
-+            fman_rtc_set_timer_alarm_l(p_MemMap, 1, 0);
-+            fman_rtc_disable_interupt(p_MemMap, FMAN_RTC_TMR_TEVENT_ALM2);
-+        }
-+        ASSERT_COND(p_Rtc->alarmParams[1].f_AlarmCallback);
-+        p_Rtc->alarmParams[1].f_AlarmCallback(p_Rtc->h_App, 1);
-+    }
-+    if (events & FMAN_RTC_TMR_TEVENT_PP1)
-+    {
-+        ASSERT_COND(p_Rtc->periodicPulseParams[0].f_PeriodicPulseCallback);
-+        p_Rtc->periodicPulseParams[0].f_PeriodicPulseCallback(p_Rtc->h_App, 0);
-+    }
-+    if (events & FMAN_RTC_TMR_TEVENT_PP2)
-+    {
-+        ASSERT_COND(p_Rtc->periodicPulseParams[1].f_PeriodicPulseCallback);
-+        p_Rtc->periodicPulseParams[1].f_PeriodicPulseCallback(p_Rtc->h_App, 1);
-+    }
-+    if (events & FMAN_RTC_TMR_TEVENT_ETS1)
-+    {
-+        ASSERT_COND(p_Rtc->externalTriggerParams[0].f_ExternalTriggerCallback);
-+        p_Rtc->externalTriggerParams[0].f_ExternalTriggerCallback(p_Rtc->h_App, 0);
-+    }
-+    if (events & FMAN_RTC_TMR_TEVENT_ETS2)
-+    {
-+        ASSERT_COND(p_Rtc->externalTriggerParams[1].f_ExternalTriggerCallback);
-+        p_Rtc->externalTriggerParams[1].f_ExternalTriggerCallback(p_Rtc->h_App, 1);
-+    }
-+}
-+
-+
-+/*****************************************************************************/
-+t_Handle FM_RTC_Config(t_FmRtcParams *p_FmRtcParam)
-+{
-+    t_FmRtc *p_Rtc;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmRtcParam, E_NULL_POINTER, NULL);
-+
-+    /* Allocate memory for the FM RTC driver parameters */
-+    p_Rtc = (t_FmRtc *)XX_Malloc(sizeof(t_FmRtc));
-+    if (!p_Rtc)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM RTC driver structure"));
-+        return NULL;
-+    }
-+
-+    memset(p_Rtc, 0, sizeof(t_FmRtc));
-+
-+    /* Allocate memory for the FM RTC driver parameters */
-+    p_Rtc->p_RtcDriverParam = (struct rtc_cfg *)XX_Malloc(sizeof(struct rtc_cfg));
-+    if (!p_Rtc->p_RtcDriverParam)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM RTC driver parameters"));
-+        XX_Free(p_Rtc);
-+        return NULL;
-+    }
-+
-+    memset(p_Rtc->p_RtcDriverParam, 0, sizeof(struct rtc_cfg));
-+
-+    /* Store RTC configuration parameters */
-+    p_Rtc->h_Fm = p_FmRtcParam->h_Fm;
-+
-+    /* Set default RTC configuration parameters */
-+    fman_rtc_defconfig(p_Rtc->p_RtcDriverParam);
-+
-+    p_Rtc->outputClockDivisor = DEFAULT_OUTPUT_CLOCK_DIVISOR;
-+    p_Rtc->p_RtcDriverParam->bypass = DEFAULT_BYPASS;
-+    p_Rtc->clockPeriodNanoSec = DEFAULT_CLOCK_PERIOD; /* 1 usec */
-+
-+
-+    /* Store RTC parameters in the RTC control structure */
-+    p_Rtc->p_MemMap = (struct rtc_regs *)UINT_TO_PTR(p_FmRtcParam->baseAddress);
-+    p_Rtc->h_App    = p_FmRtcParam->h_App;
-+
-+    return p_Rtc;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_Init(t_Handle h_FmRtc)
-+{
-+    t_FmRtc             *p_Rtc = (t_FmRtc *)h_FmRtc;
-+    struct rtc_cfg      *p_RtcDriverParam;
-+    struct rtc_regs     *p_MemMap;
-+    uint32_t            freqCompensation = 0;
-+    uint64_t            tmpDouble;
-+    bool                init_freq_comp = FALSE;
-+
-+    p_RtcDriverParam = p_Rtc->p_RtcDriverParam;
-+    p_MemMap = p_Rtc->p_MemMap;
-+
-+    if (CheckInitParameters(p_Rtc)!=E_OK)
-+        RETURN_ERROR(MAJOR, E_CONFLICT,
-+                     ("Init Parameters are not Valid"));
-+
-+    /* TODO check that no timestamping MACs are working in this stage. */
-+
-+    /* find source clock frequency in Mhz */
-+    if (p_Rtc->p_RtcDriverParam->src_clk != E_FMAN_RTC_SOURCE_CLOCK_SYSTEM)
-+        p_Rtc->srcClkFreqMhz = p_Rtc->p_RtcDriverParam->ext_src_clk_freq;
-+    else
-+        p_Rtc->srcClkFreqMhz = (uint32_t)(FmGetMacClockFreq(p_Rtc->h_Fm));
-+
-+    /* if timer in Master mode Initialize TMR_CTRL */
-+    /* We want the counter (TMR_CNT) to count in nano-seconds */
-+    if (!p_RtcDriverParam->timer_slave_mode && p_Rtc->p_RtcDriverParam->bypass)
-+        p_Rtc->clockPeriodNanoSec = (1000 / p_Rtc->srcClkFreqMhz);
-+    else
-+    {
-+        /* Initialize TMR_ADD with the initial frequency compensation value:
-+           freqCompensation = (2^32 / frequency ratio) */
-+        /* frequency ratio = sorce clock/rtc clock =
-+         * (p_Rtc->srcClkFreqMhz*1000000))/ 1/(p_Rtc->clockPeriodNanoSec * 1000000000) */
-+        init_freq_comp = TRUE;
-+        freqCompensation = (uint32_t)DIV_CEIL(ACCUMULATOR_OVERFLOW * 1000,
-+                                              p_Rtc->clockPeriodNanoSec * p_Rtc->srcClkFreqMhz);
-+    }
-+
-+    /* check the legality of the relation between source and destination clocks */
-+    /* should be larger than 1.0001 */
-+    tmpDouble = 10000 * (uint64_t)p_Rtc->clockPeriodNanoSec * (uint64_t)p_Rtc->srcClkFreqMhz;
-+    if ((tmpDouble) <= 10001)
-+        RETURN_ERROR(MAJOR, E_CONFLICT,
-+              ("Invalid relation between source and destination clocks. Should be larger than 1.0001"));
-+
-+    fman_rtc_init(p_RtcDriverParam,
-+             p_MemMap,
-+             FM_RTC_NUM_OF_ALARMS,
-+             FM_RTC_NUM_OF_PERIODIC_PULSES,
-+             FM_RTC_NUM_OF_EXT_TRIGGERS,
-+             init_freq_comp,
-+             freqCompensation,
-+             p_Rtc->outputClockDivisor);
-+
-+    /* Register the FM RTC interrupt */
-+    FmRegisterIntr(p_Rtc->h_Fm, e_FM_MOD_TMR, 0, e_FM_INTR_TYPE_NORMAL, RtcExceptions , p_Rtc);
-+
-+    /* Free parameters structures */
-+    XX_Free(p_Rtc->p_RtcDriverParam);
-+    p_Rtc->p_RtcDriverParam = NULL;
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_Free(t_Handle h_FmRtc)
-+{
-+    t_FmRtc *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+
-+    if (p_Rtc->p_RtcDriverParam)
-+    {
-+        XX_Free(p_Rtc->p_RtcDriverParam);
-+    }
-+    else
-+    {
-+        FM_RTC_Disable(h_FmRtc);
-+    }
-+
-+    /* Unregister FM RTC interrupt */
-+    FmUnregisterIntr(p_Rtc->h_Fm, e_FM_MOD_TMR, 0, e_FM_INTR_TYPE_NORMAL);
-+    XX_Free(p_Rtc);
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_ConfigSourceClock(t_Handle         h_FmRtc,
-+                                    e_FmSrcClk    srcClk,
-+                                    uint32_t      freqInMhz)
-+{
-+    t_FmRtc *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    p_Rtc->p_RtcDriverParam->src_clk = (enum fman_src_clock)srcClk;
-+    if (srcClk != e_FM_RTC_SOURCE_CLOCK_SYSTEM)
-+        p_Rtc->p_RtcDriverParam->ext_src_clk_freq = freqInMhz;
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_ConfigPeriod(t_Handle h_FmRtc, uint32_t period)
-+{
-+    t_FmRtc *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    p_Rtc->clockPeriodNanoSec = period;
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_ConfigFrequencyBypass(t_Handle h_FmRtc, bool enabled)
-+{
-+    t_FmRtc *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    p_Rtc->p_RtcDriverParam->bypass = enabled;
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_ConfigInvertedInputClockPhase(t_Handle h_FmRtc, bool inverted)
-+{
-+    t_FmRtc *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    p_Rtc->p_RtcDriverParam->invert_input_clk_phase = inverted;
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_ConfigInvertedOutputClockPhase(t_Handle h_FmRtc, bool inverted)
-+{
-+    t_FmRtc *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    p_Rtc->p_RtcDriverParam->invert_output_clk_phase = inverted;
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_ConfigOutputClockDivisor(t_Handle h_FmRtc, uint16_t divisor)
-+{
-+    t_FmRtc *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    p_Rtc->outputClockDivisor = divisor;
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_ConfigPulseRealignment(t_Handle h_FmRtc, bool enable)
-+{
-+    t_FmRtc *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    p_Rtc->p_RtcDriverParam->pulse_realign = enable;
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_ConfigAlarmPolarity(t_Handle             h_FmRtc,
-+                                   uint8_t              alarmId,
-+                                   e_FmRtcAlarmPolarity alarmPolarity)
-+{
-+    t_FmRtc *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    if (alarmId >= FM_RTC_NUM_OF_ALARMS)
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("Alarm ID"));
-+
-+    p_Rtc->p_RtcDriverParam->alarm_polarity[alarmId] =
-+        (enum fman_rtc_alarm_polarity)alarmPolarity;
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_ConfigExternalTriggerPolarity(t_Handle               h_FmRtc,
-+                                             uint8_t                triggerId,
-+                                             e_FmRtcTriggerPolarity triggerPolarity)
-+{
-+    t_FmRtc *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    if (triggerId >= FM_RTC_NUM_OF_EXT_TRIGGERS)
-+    {
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("External trigger ID"));
-+    }
-+
-+    p_Rtc->p_RtcDriverParam->trigger_polarity[triggerId] =
-+        (enum fman_rtc_trigger_polarity)triggerPolarity;
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_Enable(t_Handle h_FmRtc, bool resetClock)
-+{
-+    t_FmRtc         *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    fman_rtc_enable(p_Rtc->p_MemMap, resetClock);
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_Disable(t_Handle h_FmRtc)
-+{
-+    t_FmRtc         *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    /* TODO A check must be added here, that no timestamping MAC's
-+     * are working in this stage. */
-+    fman_rtc_disable(p_Rtc->p_MemMap);
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_SetClockOffset(t_Handle h_FmRtc, int64_t offset)
-+{
-+    t_FmRtc *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    fman_rtc_set_timer_offset(p_Rtc->p_MemMap, offset);
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_SetAlarm(t_Handle h_FmRtc, t_FmRtcAlarmParams *p_FmRtcAlarmParams)
-+{
-+    t_FmRtc         *p_Rtc = (t_FmRtc *)h_FmRtc;
-+    uint64_t        tmpAlarm;
-+    bool            enable = FALSE;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    if (p_FmRtcAlarmParams->alarmId >= FM_RTC_NUM_OF_ALARMS)
-+    {
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("Alarm ID"));
-+    }
-+
-+    if (p_FmRtcAlarmParams->alarmTime < p_Rtc->clockPeriodNanoSec)
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION,
-+                     ("Alarm time must be equal or larger than RTC period - %d nanoseconds",
-+                      p_Rtc->clockPeriodNanoSec));
-+    tmpAlarm = p_FmRtcAlarmParams->alarmTime;
-+    if (do_div(tmpAlarm, p_Rtc->clockPeriodNanoSec))
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION,
-+                     ("Alarm time must be a multiple of RTC period - %d nanoseconds",
-+                      p_Rtc->clockPeriodNanoSec));
-+
-+    if (p_FmRtcAlarmParams->f_AlarmCallback)
-+    {
-+        p_Rtc->alarmParams[p_FmRtcAlarmParams->alarmId].f_AlarmCallback = p_FmRtcAlarmParams->f_AlarmCallback;
-+        p_Rtc->alarmParams[p_FmRtcAlarmParams->alarmId].clearOnExpiration = p_FmRtcAlarmParams->clearOnExpiration;
-+        enable = TRUE;
-+    }
-+
-+    fman_rtc_set_alarm(p_Rtc->p_MemMap, p_FmRtcAlarmParams->alarmId, (unsigned long)tmpAlarm, enable);
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_SetPeriodicPulse(t_Handle h_FmRtc, t_FmRtcPeriodicPulseParams *p_FmRtcPeriodicPulseParams)
-+{
-+    t_FmRtc         *p_Rtc = (t_FmRtc *)h_FmRtc;
-+    bool            enable = FALSE;
-+    uint64_t        tmpFiper;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    if (p_FmRtcPeriodicPulseParams->periodicPulseId >= FM_RTC_NUM_OF_PERIODIC_PULSES)
-+    {
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("Periodic pulse ID"));
-+    }
-+    if (fman_rtc_is_enabled(p_Rtc->p_MemMap))
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("Can't set Periodic pulse when RTC is enabled."));
-+    if (p_FmRtcPeriodicPulseParams->periodicPulsePeriod < p_Rtc->clockPeriodNanoSec)
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION,
-+                     ("Periodic pulse must be equal or larger than RTC period - %d nanoseconds",
-+                      p_Rtc->clockPeriodNanoSec));
-+    tmpFiper = p_FmRtcPeriodicPulseParams->periodicPulsePeriod;
-+    if (do_div(tmpFiper, p_Rtc->clockPeriodNanoSec))
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION,
-+                     ("Periodic pulse must be a multiple of RTC period - %d nanoseconds",
-+                      p_Rtc->clockPeriodNanoSec));
-+    if (tmpFiper & 0xffffffff00000000LL)
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION,
-+                     ("Periodic pulse/RTC Period must be smaller than 4294967296",
-+                      p_Rtc->clockPeriodNanoSec));
-+
-+    if (p_FmRtcPeriodicPulseParams->f_PeriodicPulseCallback)
-+    {
-+        p_Rtc->periodicPulseParams[p_FmRtcPeriodicPulseParams->periodicPulseId].f_PeriodicPulseCallback =
-+                                                                p_FmRtcPeriodicPulseParams->f_PeriodicPulseCallback;
-+        enable = TRUE;
-+    }
-+    fman_rtc_set_periodic_pulse(p_Rtc->p_MemMap, p_FmRtcPeriodicPulseParams->periodicPulseId, (uint32_t)tmpFiper, enable);
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_ClearPeriodicPulse(t_Handle h_FmRtc, uint8_t periodicPulseId)
-+{
-+    t_FmRtc     *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    if (periodicPulseId >= FM_RTC_NUM_OF_PERIODIC_PULSES)
-+    {
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("Periodic pulse ID"));
-+    }
-+
-+    p_Rtc->periodicPulseParams[periodicPulseId].f_PeriodicPulseCallback = NULL;
-+    fman_rtc_clear_periodic_pulse(p_Rtc->p_MemMap, periodicPulseId);
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_SetExternalTrigger(t_Handle h_FmRtc, t_FmRtcExternalTriggerParams *p_FmRtcExternalTriggerParams)
-+{
-+    t_FmRtc     *p_Rtc = (t_FmRtc *)h_FmRtc;
-+    bool        enable = FALSE;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    if (p_FmRtcExternalTriggerParams->externalTriggerId >= FM_RTC_NUM_OF_EXT_TRIGGERS)
-+    {
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("External Trigger ID"));
-+    }
-+
-+    if (p_FmRtcExternalTriggerParams->f_ExternalTriggerCallback)
-+    {
-+        p_Rtc->externalTriggerParams[p_FmRtcExternalTriggerParams->externalTriggerId].f_ExternalTriggerCallback = p_FmRtcExternalTriggerParams->f_ExternalTriggerCallback;
-+        enable = TRUE;
-+    }
-+
-+    fman_rtc_set_ext_trigger(p_Rtc->p_MemMap, p_FmRtcExternalTriggerParams->externalTriggerId, enable, p_FmRtcExternalTriggerParams->usePulseAsInput);
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_ClearExternalTrigger(t_Handle h_FmRtc, uint8_t externalTriggerId)
-+{
-+    t_FmRtc     *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    if (externalTriggerId >= FM_RTC_NUM_OF_EXT_TRIGGERS)
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("External Trigger ID"));
-+
-+    p_Rtc->externalTriggerParams[externalTriggerId].f_ExternalTriggerCallback = NULL;
-+
-+    fman_rtc_clear_external_trigger(p_Rtc->p_MemMap, externalTriggerId);
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_GetExternalTriggerTimeStamp(t_Handle             h_FmRtc,
-+                                              uint8_t           triggerId,
-+                                              uint64_t          *p_TimeStamp)
-+{
-+    t_FmRtc     *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    if (triggerId >= FM_RTC_NUM_OF_EXT_TRIGGERS)
-+        RETURN_ERROR(MAJOR, E_INVALID_SELECTION, ("External trigger ID"));
-+
-+    *p_TimeStamp = fman_rtc_get_trigger_stamp(p_Rtc->p_MemMap, triggerId)*p_Rtc->clockPeriodNanoSec;
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_GetCurrentTime(t_Handle h_FmRtc, uint64_t *p_Ts)
-+{
-+    t_FmRtc     *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    *p_Ts = fman_rtc_get_timer(p_Rtc->p_MemMap)*p_Rtc->clockPeriodNanoSec;
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_SetCurrentTime(t_Handle h_FmRtc, uint64_t ts)
-+{
-+    t_FmRtc     *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    do_div(ts, p_Rtc->clockPeriodNanoSec);
-+    fman_rtc_set_timer(p_Rtc->p_MemMap, (int64_t)ts);
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_GetFreqCompensation(t_Handle h_FmRtc, uint32_t *p_Compensation)
-+{
-+    t_FmRtc     *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    *p_Compensation = fman_rtc_get_frequency_compensation(p_Rtc->p_MemMap);
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_SetFreqCompensation(t_Handle h_FmRtc, uint32_t freqCompensation)
-+{
-+    t_FmRtc *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+    /* set the new freqCompensation */
-+    fman_rtc_set_frequency_compensation(p_Rtc->p_MemMap, freqCompensation);
-+
-+    return E_OK;
-+}
-+
-+#ifdef CONFIG_PTP_1588_CLOCK_DPAA
-+/*****************************************************************************/
-+t_Error FM_RTC_EnableInterrupt(t_Handle h_FmRtc, uint32_t events)
-+{
-+	t_FmRtc *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+	SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+	SANITY_CHECK_RETURN_ERROR(!p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+	/* enable interrupt */
-+	fman_rtc_enable_interupt(p_Rtc->p_MemMap, events);
-+
-+	return E_OK;
-+}
-+
-+/*****************************************************************************/
-+t_Error FM_RTC_DisableInterrupt(t_Handle h_FmRtc, uint32_t events)
-+{
-+	t_FmRtc *p_Rtc = (t_FmRtc *)h_FmRtc;
-+
-+	SANITY_CHECK_RETURN_ERROR(p_Rtc, E_INVALID_HANDLE);
-+	SANITY_CHECK_RETURN_ERROR(!p_Rtc->p_RtcDriverParam, E_INVALID_STATE);
-+
-+	/* disable interrupt */
-+	fman_rtc_disable_interupt(p_Rtc->p_MemMap, events);
-+
-+	return E_OK;
-+}
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Rtc/fm_rtc.h
-@@ -0,0 +1,96 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_rtc.h
-+
-+ @Description   Memory map and internal definitions for FM RTC IEEE1588 Timer driver.
-+
-+ @Cautions      None
-+*//***************************************************************************/
-+
-+#ifndef __FM_RTC_H__
-+#define __FM_RTC_H__
-+
-+#include "std_ext.h"
-+#include "fm_rtc_ext.h"
-+
-+
-+#define __ERR_MODULE__  MODULE_FM_RTC
-+
-+/* General definitions */
-+
-+#define ACCUMULATOR_OVERFLOW            ((uint64_t)(1LL << 32))
-+#define DEFAULT_OUTPUT_CLOCK_DIVISOR     0x00000002
-+#define DEFAULT_BYPASS      			 FALSE
-+#define DEFAULT_CLOCK_PERIOD             1000
-+
-+
-+
-+typedef struct t_FmRtcAlarm
-+{
-+    t_FmRtcExceptionsCallback   *f_AlarmCallback;
-+    bool                        clearOnExpiration;
-+} t_FmRtcAlarm;
-+
-+typedef struct t_FmRtcPeriodicPulse
-+{
-+    t_FmRtcExceptionsCallback   *f_PeriodicPulseCallback;
-+} t_FmRtcPeriodicPulse;
-+
-+typedef struct t_FmRtcExternalTrigger
-+{
-+    t_FmRtcExceptionsCallback   *f_ExternalTriggerCallback;
-+} t_FmRtcExternalTrigger;
-+
-+
-+/**************************************************************************//**
-+ @Description RTC FM driver control structure.
-+*//***************************************************************************/
-+typedef struct t_FmRtc
-+{
-+    t_Part                  *p_Part;            /**< Pointer to the integration device              */
-+    t_Handle                h_Fm;
-+    t_Handle                h_App;              /**< Application handle */
-+    struct rtc_regs			*p_MemMap;
-+    uint32_t                clockPeriodNanoSec; /**< RTC clock period in nano-seconds (for FS mode) */
-+    uint32_t                srcClkFreqMhz;
-+    uint16_t                outputClockDivisor; /**< Output clock divisor (for FS mode) */
-+    t_FmRtcAlarm            alarmParams[FM_RTC_NUM_OF_ALARMS];
-+    t_FmRtcPeriodicPulse    periodicPulseParams[FM_RTC_NUM_OF_PERIODIC_PULSES];
-+    t_FmRtcExternalTrigger  externalTriggerParams[FM_RTC_NUM_OF_EXT_TRIGGERS];
-+    struct rtc_cfg 			*p_RtcDriverParam;  /**< RTC Driver parameters (for Init phase) */
-+} t_FmRtc;
-+
-+
-+#endif /* __FM_RTC_H__ */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Rtc/fman_rtc.c
-@@ -0,0 +1,334 @@
-+/*
-+ * Copyright 2008-2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "fsl_fman_rtc.h"
-+
-+void fman_rtc_defconfig(struct rtc_cfg *cfg)
-+{
-+	int i;
-+	cfg->src_clk = DEFAULT_SRC_CLOCK;
-+	cfg->invert_input_clk_phase = DEFAULT_INVERT_INPUT_CLK_PHASE;
-+	cfg->invert_output_clk_phase = DEFAULT_INVERT_OUTPUT_CLK_PHASE;
-+	cfg->pulse_realign = DEFAULT_PULSE_REALIGN;
-+	for (i = 0; i < FMAN_RTC_MAX_NUM_OF_ALARMS; i++)
-+		cfg->alarm_polarity[i] = DEFAULT_ALARM_POLARITY;
-+	for (i = 0; i < FMAN_RTC_MAX_NUM_OF_EXT_TRIGGERS; i++)
-+		cfg->trigger_polarity[i] = DEFAULT_TRIGGER_POLARITY;
-+}
-+
-+uint32_t fman_rtc_get_events(struct rtc_regs *regs)
-+{
-+	return ioread32be(&regs->tmr_tevent);
-+}
-+
-+uint32_t fman_rtc_get_event(struct rtc_regs *regs, uint32_t ev_mask)
-+{
-+	return ioread32be(&regs->tmr_tevent) & ev_mask;
-+}
-+
-+uint32_t fman_rtc_get_interrupt_mask(struct rtc_regs *regs)
-+{
-+	return ioread32be(&regs->tmr_temask);
-+}
-+
-+void fman_rtc_set_interrupt_mask(struct rtc_regs *regs, uint32_t mask)
-+{
-+	iowrite32be(mask, &regs->tmr_temask);
-+}
-+
-+void fman_rtc_ack_event(struct rtc_regs *regs, uint32_t events)
-+{
-+	iowrite32be(events, &regs->tmr_tevent);
-+}
-+
-+uint32_t fman_rtc_check_and_clear_event(struct rtc_regs *regs)
-+{
-+	uint32_t event;
-+
-+	event = ioread32be(&regs->tmr_tevent);
-+	event &= ioread32be(&regs->tmr_temask);
-+
-+	if (event)
-+		iowrite32be(event, &regs->tmr_tevent);
-+	return event;
-+}
-+
-+uint32_t fman_rtc_get_frequency_compensation(struct rtc_regs *regs)
-+{
-+	return ioread32be(&regs->tmr_add);
-+}
-+
-+void fman_rtc_set_frequency_compensation(struct rtc_regs *regs, uint32_t val)
-+{
-+	iowrite32be(val, &regs->tmr_add);
-+}
-+
-+void fman_rtc_enable_interupt(struct rtc_regs *regs, uint32_t events)
-+{
-+	fman_rtc_set_interrupt_mask(regs, fman_rtc_get_interrupt_mask(regs) | events);
-+}
-+
-+void fman_rtc_disable_interupt(struct rtc_regs *regs, uint32_t events)
-+{
-+	fman_rtc_set_interrupt_mask(regs, fman_rtc_get_interrupt_mask(regs) & ~events);
-+}
-+
-+void fman_rtc_set_timer_alarm_l(struct rtc_regs *regs, int index, uint32_t val)
-+{
-+	iowrite32be(val, &regs->tmr_alarm[index].tmr_alarm_l);
-+}
-+
-+void fman_rtc_set_timer_fiper(struct rtc_regs *regs, int index, uint32_t val)
-+{
-+	iowrite32be(val, &regs->tmr_fiper[index]);
-+}
-+
-+void fman_rtc_set_timer_alarm(struct rtc_regs *regs, int index, int64_t val)
-+{
-+	iowrite32be((uint32_t)val, &regs->tmr_alarm[index].tmr_alarm_l);
-+	iowrite32be((uint32_t)(val >> 32), &regs->tmr_alarm[index].tmr_alarm_h);
-+}
-+
-+void fman_rtc_set_timer_offset(struct rtc_regs *regs, int64_t val)
-+{
-+	iowrite32be((uint32_t)val, &regs->tmr_off_l);
-+	iowrite32be((uint32_t)(val >> 32), &regs->tmr_off_h);
-+}
-+
-+uint64_t fman_rtc_get_trigger_stamp(struct rtc_regs *regs, int id)
-+{
-+	uint64_t time;
-+	/* TMR_CNT_L must be read first to get an accurate value */
-+	time = (uint64_t)ioread32be(&regs->tmr_etts[id].tmr_etts_l);
-+	time |= ((uint64_t)ioread32be(&regs->tmr_etts[id].tmr_etts_h)
-+		<< 32);
-+
-+	return time;
-+}
-+
-+uint32_t fman_rtc_get_timer_ctrl(struct rtc_regs *regs)
-+{
-+	return ioread32be(&regs->tmr_ctrl);
-+}
-+
-+void fman_rtc_set_timer_ctrl(struct rtc_regs *regs, uint32_t val)
-+{
-+	iowrite32be(val, &regs->tmr_ctrl);
-+}
-+
-+void fman_rtc_timers_soft_reset(struct rtc_regs *regs)
-+{
-+	fman_rtc_set_timer_ctrl(regs, FMAN_RTC_TMR_CTRL_TMSR);
-+	udelay(10);
-+	fman_rtc_set_timer_ctrl(regs, 0);
-+}
-+
-+void fman_rtc_init(struct rtc_cfg *cfg, struct rtc_regs *regs, int num_alarms,
-+		int num_fipers, int num_ext_triggers, bool init_freq_comp,
-+		uint32_t freq_compensation, uint32_t output_clock_divisor)
-+{
-+	uint32_t            tmr_ctrl;
-+	int			i;
-+
-+	fman_rtc_timers_soft_reset(regs);
-+
-+	/* Set the source clock */
-+	switch (cfg->src_clk) {
-+	case E_FMAN_RTC_SOURCE_CLOCK_SYSTEM:
-+		tmr_ctrl = FMAN_RTC_TMR_CTRL_CKSEL_MAC_CLK;
-+		break;
-+	case E_FMAN_RTC_SOURCE_CLOCK_OSCILATOR:
-+		tmr_ctrl = FMAN_RTC_TMR_CTRL_CKSEL_OSC_CLK;
-+		break;
-+	default:
-+		/* Use a clock from the External TMR reference clock.*/
-+		tmr_ctrl = FMAN_RTC_TMR_CTRL_CKSEL_EXT_CLK;
-+		break;
-+	}
-+
-+	/* whatever period the user picked, the timestamp will advance in '1'
-+	* every time the period passed. */
-+	tmr_ctrl |= ((1 << FMAN_RTC_TMR_CTRL_TCLK_PERIOD_SHIFT) &
-+				FMAN_RTC_TMR_CTRL_TCLK_PERIOD_MASK);
-+
-+	if (cfg->invert_input_clk_phase)
-+		tmr_ctrl |= FMAN_RTC_TMR_CTRL_CIPH;
-+	if (cfg->invert_output_clk_phase)
-+		tmr_ctrl |= FMAN_RTC_TMR_CTRL_COPH;
-+
-+	for (i = 0; i < num_alarms; i++) {
-+		if (cfg->alarm_polarity[i] ==
-+			E_FMAN_RTC_ALARM_POLARITY_ACTIVE_LOW)
-+			tmr_ctrl |= (FMAN_RTC_TMR_CTRL_ALMP1 >> i);
-+	}
-+
-+	for (i = 0; i < num_ext_triggers; i++)
-+		if (cfg->trigger_polarity[i] ==
-+			E_FMAN_RTC_TRIGGER_ON_FALLING_EDGE)
-+			tmr_ctrl |= (FMAN_RTC_TMR_CTRL_ETEP1 << i);
-+
-+	if (!cfg->timer_slave_mode && cfg->bypass)
-+		tmr_ctrl |= FMAN_RTC_TMR_CTRL_BYP;
-+
-+	fman_rtc_set_timer_ctrl(regs, tmr_ctrl);
-+	if (init_freq_comp)
-+		fman_rtc_set_frequency_compensation(regs, freq_compensation);
-+
-+	/* Clear TMR_ALARM registers */
-+	for (i = 0; i < num_alarms; i++)
-+		fman_rtc_set_timer_alarm(regs, i, 0xFFFFFFFFFFFFFFFFLL);
-+
-+	/* Clear TMR_TEVENT */
-+	fman_rtc_ack_event(regs, FMAN_RTC_TMR_TEVENT_ALL);
-+
-+	/* Initialize TMR_TEMASK */
-+	fman_rtc_set_interrupt_mask(regs, 0);
-+
-+	/* Clear TMR_FIPER registers */
-+	for (i = 0; i < num_fipers; i++)
-+		fman_rtc_set_timer_fiper(regs, i, 0xFFFFFFFF);
-+
-+	/* Initialize TMR_PRSC */
-+	iowrite32be(output_clock_divisor, &regs->tmr_prsc);
-+
-+	/* Clear TMR_OFF */
-+	fman_rtc_set_timer_offset(regs, 0);
-+}
-+
-+bool fman_rtc_is_enabled(struct rtc_regs *regs)
-+{
-+	return (bool)(fman_rtc_get_timer_ctrl(regs) & FMAN_RTC_TMR_CTRL_TE);
-+}
-+
-+void fman_rtc_enable(struct rtc_regs *regs, bool reset_clock)
-+{
-+	uint32_t tmr_ctrl = fman_rtc_get_timer_ctrl(regs);
-+
-+	/* TODO check that no timestamping MACs are working in this stage. */
-+	if (reset_clock) {
-+		fman_rtc_set_timer_ctrl(regs, (tmr_ctrl | FMAN_RTC_TMR_CTRL_TMSR));
-+
-+		udelay(10);
-+		/* Clear TMR_OFF */
-+		fman_rtc_set_timer_offset(regs, 0);
-+	}
-+
-+	fman_rtc_set_timer_ctrl(regs, (tmr_ctrl | FMAN_RTC_TMR_CTRL_TE));
-+}
-+
-+void fman_rtc_disable(struct rtc_regs *regs)
-+{
-+	fman_rtc_set_timer_ctrl(regs, (fman_rtc_get_timer_ctrl(regs)
-+					& ~(FMAN_RTC_TMR_CTRL_TE)));
-+}
-+
-+void fman_rtc_clear_periodic_pulse(struct rtc_regs *regs, int id)
-+{
-+	uint32_t tmp_reg;
-+	if (id == 0)
-+		tmp_reg = FMAN_RTC_TMR_TEVENT_PP1;
-+	else
-+		tmp_reg = FMAN_RTC_TMR_TEVENT_PP2;
-+	fman_rtc_disable_interupt(regs, tmp_reg);
-+
-+	tmp_reg = fman_rtc_get_timer_ctrl(regs);
-+	if (tmp_reg & FMAN_RTC_TMR_CTRL_FS)
-+		fman_rtc_set_timer_ctrl(regs, tmp_reg & ~FMAN_RTC_TMR_CTRL_FS);
-+
-+	fman_rtc_set_timer_fiper(regs, id, 0xFFFFFFFF);
-+}
-+
-+void fman_rtc_clear_external_trigger(struct rtc_regs *regs, int id)
-+{
-+	uint32_t    tmpReg, tmp_ctrl;
-+
-+	if (id == 0)
-+		tmpReg = FMAN_RTC_TMR_TEVENT_ETS1;
-+	else
-+		tmpReg = FMAN_RTC_TMR_TEVENT_ETS2;
-+	fman_rtc_disable_interupt(regs, tmpReg);
-+
-+	if (id == 0)
-+		tmpReg = FMAN_RTC_TMR_CTRL_PP1L;
-+	else
-+		tmpReg = FMAN_RTC_TMR_CTRL_PP2L;
-+	tmp_ctrl = fman_rtc_get_timer_ctrl(regs);
-+	if (tmp_ctrl & tmpReg)
-+		fman_rtc_set_timer_ctrl(regs, tmp_ctrl & ~tmpReg);
-+}
-+
-+void fman_rtc_set_alarm(struct rtc_regs *regs, int id, uint32_t val, bool enable)
-+{
-+	uint32_t    tmpReg;
-+	fman_rtc_set_timer_alarm(regs, id, val);
-+	if (enable) {
-+		if (id == 0)
-+			tmpReg = FMAN_RTC_TMR_TEVENT_ALM1;
-+		else
-+			tmpReg = FMAN_RTC_TMR_TEVENT_ALM2;
-+		fman_rtc_enable_interupt(regs, tmpReg);
-+	}
-+}
-+
-+void fman_rtc_set_periodic_pulse(struct rtc_regs *regs, int id, uint32_t val,
-+						bool enable)
-+{
-+	uint32_t    tmpReg;
-+	fman_rtc_set_timer_fiper(regs, id, val);
-+	if (enable) {
-+		if (id == 0)
-+			tmpReg = FMAN_RTC_TMR_TEVENT_PP1;
-+		else
-+			tmpReg = FMAN_RTC_TMR_TEVENT_PP2;
-+		fman_rtc_enable_interupt(regs, tmpReg);
-+	}
-+}
-+
-+void fman_rtc_set_ext_trigger(struct rtc_regs *regs, int id, bool enable,
-+						bool use_pulse_as_input)
-+{
-+	uint32_t    tmpReg;
-+	if (enable) {
-+		if (id == 0)
-+			tmpReg = FMAN_RTC_TMR_TEVENT_ETS1;
-+		else
-+			tmpReg = FMAN_RTC_TMR_TEVENT_ETS2;
-+		fman_rtc_enable_interupt(regs, tmpReg);
-+	}
-+	if (use_pulse_as_input)	{
-+		if (id == 0)
-+			tmpReg = FMAN_RTC_TMR_CTRL_PP1L;
-+		else
-+			tmpReg = FMAN_RTC_TMR_CTRL_PP2L;
-+		fman_rtc_set_timer_ctrl(regs, fman_rtc_get_timer_ctrl(regs) | tmpReg);
-+	}
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/SP/Makefile
-@@ -0,0 +1,15 @@
-+#
-+# Makefile for the Freescale Ethernet controllers
-+#
-+ccflags-y           += -DVERSION=\"\"
-+#
-+#Include netcomm SW specific definitions
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+
-+NCSW_FM_INC = $(srctree)/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/inc
-+
-+ccflags-y += -I$(NCSW_FM_INC)
-+
-+obj-y		+= fsl-ncsw-sp.o
-+
-+fsl-ncsw-sp-objs	:= fm_sp.o fman_sp.o
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/SP/fm_sp.c
-@@ -0,0 +1,757 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_sp.c
-+
-+ @Description   FM PCD Storage profile  ...
-+*//***************************************************************************/
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "string_ext.h"
-+#include "debug_ext.h"
-+#include "net_ext.h"
-+
-+#include "fm_vsp_ext.h"
-+#include "fm_sp.h"
-+#include "fm_common.h"
-+#include "fsl_fman_sp.h"
-+
-+
-+#if (DPAA_VERSION >= 11)
-+static t_Error CheckParamsGeneratedInternally(t_FmVspEntry *p_FmVspEntry)
-+{
-+    t_Error err = E_OK;
-+
-+    if ((err = FmSpCheckIntContextParams(&p_FmVspEntry->intContext))!= E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    if ((err =  FmSpCheckBufMargins(&p_FmVspEntry->bufMargins)) != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    return err;
-+
-+}
-+
-+static t_Error CheckParams(t_FmVspEntry *p_FmVspEntry)
-+{
-+    t_Error err = E_OK;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry->p_FmVspEntryDriverParams, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry->h_Fm, E_INVALID_HANDLE);
-+
-+    if ((err = FmSpCheckBufPoolsParams(&p_FmVspEntry->p_FmVspEntryDriverParams->extBufPools,
-+                                        p_FmVspEntry->p_FmVspEntryDriverParams->p_BackupBmPools,
-+                                        p_FmVspEntry->p_FmVspEntryDriverParams->p_BufPoolDepletion)) != E_OK)
-+
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+    if (p_FmVspEntry->p_FmVspEntryDriverParams->liodnOffset & ~FM_LIODN_OFFSET_MASK)
-+         RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("liodnOffset is larger than %d", FM_LIODN_OFFSET_MASK+1));
-+
-+    err = FmVSPCheckRelativeProfile(p_FmVspEntry->h_Fm,
-+                                    p_FmVspEntry->portType,
-+                                    p_FmVspEntry->portId,
-+                                    p_FmVspEntry->relativeProfileId);
-+
-+    return err;
-+}
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+
-+/*****************************************************************************/
-+/*              Inter-module API routines                                    */
-+/*****************************************************************************/
-+void FmSpSetBufPoolsInAscOrderOfBufSizes(t_FmExtPools   *p_FmExtPools,
-+                                         uint8_t        *orderedArray,
-+                                         uint16_t       *sizesArray)
-+{
-+    uint16_t                    bufSize = 0;
-+    int                         i=0, j=0, k=0;
-+
-+    /* First we copy the external buffers pools information to an ordered local array */
-+    for (i=0;i<p_FmExtPools->numOfPoolsUsed;i++)
-+    {
-+        /* get pool size */
-+        bufSize = p_FmExtPools->extBufPool[i].size;
-+
-+        /* keep sizes in an array according to poolId for direct access */
-+        sizesArray[p_FmExtPools->extBufPool[i].id] =  bufSize;
-+
-+        /* save poolId in an ordered array according to size */
-+        for (j=0;j<=i;j++)
-+        {
-+            /* this is the next free place in the array */
-+            if (j==i)
-+                orderedArray[i] = p_FmExtPools->extBufPool[i].id;
-+            else
-+            {
-+                /* find the right place for this poolId */
-+                if (bufSize < sizesArray[orderedArray[j]])
-+                {
-+                    /* move the poolIds one place ahead to make room for this poolId */
-+                    for (k=i;k>j;k--)
-+                       orderedArray[k] = orderedArray[k-1];
-+
-+                    /* now k==j, this is the place for the new size */
-+                    orderedArray[k] = p_FmExtPools->extBufPool[i].id;
-+                    break;
-+                }
-+            }
-+        }
-+    }
-+}
-+
-+t_Error FmSpCheckBufPoolsParams(t_FmExtPools            *p_FmExtPools,
-+                                t_FmBackupBmPools       *p_FmBackupBmPools,
-+                                t_FmBufPoolDepletion    *p_FmBufPoolDepletion)
-+{
-+
-+    int         i = 0, j = 0;
-+    bool        found;
-+    uint8_t     count = 0;
-+
-+    if (p_FmExtPools)
-+    {
-+        if (p_FmExtPools->numOfPoolsUsed > FM_PORT_MAX_NUM_OF_EXT_POOLS)
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("numOfPoolsUsed can't be larger than %d", FM_PORT_MAX_NUM_OF_EXT_POOLS));
-+
-+        for (i=0;i<p_FmExtPools->numOfPoolsUsed;i++)
-+        {
-+            if (p_FmExtPools->extBufPool[i].id >= BM_MAX_NUM_OF_POOLS)
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("extBufPools.extBufPool[%d].id can't be larger than %d", i, BM_MAX_NUM_OF_POOLS));
-+            if (!p_FmExtPools->extBufPool[i].size)
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("extBufPools.extBufPool[%d].size is 0", i));
-+        }
-+    }
-+    if (!p_FmExtPools && (p_FmBackupBmPools || p_FmBufPoolDepletion))
-+          RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("backupBmPools ot bufPoolDepletion can not be defined without external pools"));
-+
-+    /* backup BM pools indication is valid only for some chip derivatives
-+       (limited by the config routine) */
-+    if (p_FmBackupBmPools)
-+    {
-+        if (p_FmBackupBmPools->numOfBackupPools >= p_FmExtPools->numOfPoolsUsed)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("p_BackupBmPools must be smaller than extBufPools.numOfPoolsUsed"));
-+        found = FALSE;
-+        for (i = 0;i<p_FmBackupBmPools->numOfBackupPools;i++)
-+        {
-+
-+            for (j=0;j<p_FmExtPools->numOfPoolsUsed;j++)
-+            {
-+                if (p_FmBackupBmPools->poolIds[i] == p_FmExtPools->extBufPool[j].id)
-+                {
-+                    found = TRUE;
-+                    break;
-+                }
-+            }
-+            if (!found)
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("All p_BackupBmPools.poolIds must be included in extBufPools.extBufPool[n].id"));
-+            else
-+                found = FALSE;
-+        }
-+    }
-+
-+    /* up to extBufPools.numOfPoolsUsed pools may be defined */
-+    if (p_FmBufPoolDepletion && p_FmBufPoolDepletion->poolsGrpModeEnable)
-+    {
-+        if ((p_FmBufPoolDepletion->numOfPools > p_FmExtPools->numOfPoolsUsed))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("bufPoolDepletion.numOfPools can't be larger than %d and can't be larger than numOfPoolsUsed", FM_PORT_MAX_NUM_OF_EXT_POOLS));
-+
-+        if (!p_FmBufPoolDepletion->numOfPools)
-+          RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("bufPoolDepletion.numOfPoolsToConsider can not be 0 when poolsGrpModeEnable=TRUE"));
-+
-+        found = FALSE;
-+        count = 0;
-+        /* for each pool that is in poolsToConsider, check if it is defined
-+           in extBufPool */
-+        for (i=0;i<BM_MAX_NUM_OF_POOLS;i++)
-+        {
-+            if (p_FmBufPoolDepletion->poolsToConsider[i])
-+            {
-+                for (j=0;j<p_FmExtPools->numOfPoolsUsed;j++)
-+                 {
-+                    if (i == p_FmExtPools->extBufPool[j].id)
-+                    {
-+                        found = TRUE;
-+                        count++;
-+                        break;
-+                    }
-+                 }
-+                if (!found)
-+                    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Pools selected for depletion are not used."));
-+                else
-+                    found = FALSE;
-+            }
-+        }
-+        /* check that the number of pools that we have checked is equal to the number announced by the user */
-+        if (count != p_FmBufPoolDepletion->numOfPools)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("bufPoolDepletion.numOfPools is larger than the number of pools defined."));
-+    }
-+
-+    if (p_FmBufPoolDepletion && p_FmBufPoolDepletion->singlePoolModeEnable)
-+    {
-+        /* calculate vector for number of pools depletion */
-+        found = FALSE;
-+        count = 0;
-+        for (i=0;i<BM_MAX_NUM_OF_POOLS;i++)
-+        {
-+            if (p_FmBufPoolDepletion->poolsToConsiderForSingleMode[i])
-+            {
-+                for (j=0;j<p_FmExtPools->numOfPoolsUsed;j++)
-+                {
-+                    if (i == p_FmExtPools->extBufPool[j].id)
-+                    {
-+                        found = TRUE;
-+                        count++;
-+                        break;
-+                    }
-+                }
-+                if (!found)
-+                    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Pools selected for depletion are not used."));
-+                else
-+                    found = FALSE;
-+            }
-+        }
-+        if (!count)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("No pools defined for single buffer mode pool depletion."));
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Error FmSpCheckIntContextParams(t_FmSpIntContextDataCopy *p_FmSpIntContextDataCopy)
-+{
-+    /* Check that divisible by 16 and not larger than 240 */
-+    if (p_FmSpIntContextDataCopy->intContextOffset >MAX_INT_OFFSET)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("intContext.intContextOffset can't be larger than %d", MAX_INT_OFFSET));
-+    if (p_FmSpIntContextDataCopy->intContextOffset % OFFSET_UNITS)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("intContext.intContextOffset has to be divisible by %d", OFFSET_UNITS));
-+
-+    /* check that ic size+ic internal offset, does not exceed ic block size */
-+    if (p_FmSpIntContextDataCopy->size + p_FmSpIntContextDataCopy->intContextOffset > MAX_IC_SIZE)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("intContext.size + intContext.intContextOffset has to be smaller than %d", MAX_IC_SIZE));
-+    /* Check that divisible by 16 and not larger than 256 */
-+    if (p_FmSpIntContextDataCopy->size % OFFSET_UNITS)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("intContext.size  has to be divisible by %d", OFFSET_UNITS));
-+
-+    /* Check that divisible by 16 and not larger than 4K */
-+    if (p_FmSpIntContextDataCopy->extBufOffset > MAX_EXT_OFFSET)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("intContext.extBufOffset can't be larger than %d", MAX_EXT_OFFSET));
-+    if (p_FmSpIntContextDataCopy->extBufOffset % OFFSET_UNITS)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("intContext.extBufOffset  has to be divisible by %d", OFFSET_UNITS));
-+
-+    return E_OK;
-+}
-+
-+t_Error FmSpCheckBufMargins(t_FmSpBufMargins *p_FmSpBufMargins)
-+{
-+    /* Check the margin definition */
-+    if (p_FmSpBufMargins->startMargins > MAX_EXT_BUFFER_OFFSET)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("bufMargins.startMargins can't be larger than %d", MAX_EXT_BUFFER_OFFSET));
-+    if (p_FmSpBufMargins->endMargins > MAX_EXT_BUFFER_OFFSET)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("bufMargins.endMargins can't be larger than %d", MAX_EXT_BUFFER_OFFSET));
-+
-+    return E_OK;
-+}
-+
-+t_Error FmSpBuildBufferStructure(t_FmSpIntContextDataCopy   *p_FmSpIntContextDataCopy,
-+                                 t_FmBufferPrefixContent     *p_BufferPrefixContent,
-+                                 t_FmSpBufMargins            *p_FmSpBufMargins,
-+                                 t_FmSpBufferOffsets         *p_FmSpBufferOffsets,
-+                                 uint8_t                     *internalBufferOffset)
-+{
-+    uint32_t                        tmp;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmSpIntContextDataCopy,  E_INVALID_VALUE);
-+    ASSERT_COND(p_FmSpIntContextDataCopy);
-+    ASSERT_COND(p_BufferPrefixContent);
-+    ASSERT_COND(p_FmSpBufMargins);
-+    ASSERT_COND(p_FmSpBufferOffsets);
-+
-+    /* Align start of internal context data to 16 byte */
-+    p_FmSpIntContextDataCopy->extBufOffset =
-+        (uint16_t)((p_BufferPrefixContent->privDataSize & (OFFSET_UNITS-1)) ?
-+            ((p_BufferPrefixContent->privDataSize + OFFSET_UNITS) & ~(uint16_t)(OFFSET_UNITS-1)) :
-+             p_BufferPrefixContent->privDataSize);
-+
-+    /* Translate margin and intContext params to FM parameters */
-+    /* Initialize with illegal value. Later we'll set legal values. */
-+    p_FmSpBufferOffsets->prsResultOffset = (uint32_t)ILLEGAL_BASE;
-+    p_FmSpBufferOffsets->timeStampOffset = (uint32_t)ILLEGAL_BASE;
-+    p_FmSpBufferOffsets->hashResultOffset= (uint32_t)ILLEGAL_BASE;
-+    p_FmSpBufferOffsets->pcdInfoOffset   = (uint32_t)ILLEGAL_BASE;
-+
-+    /* Internally the driver supports 4 options
-+       1. prsResult/timestamp/hashResult selection (in fact 8 options, but for simplicity we'll
-+          relate to it as 1).
-+       2. All IC context (from AD) not including debug.*/
-+
-+    /* This 'if' covers option 2. We copy from beginning of context. */
-+    if (p_BufferPrefixContent->passAllOtherPCDInfo)
-+    {
-+        p_FmSpIntContextDataCopy->size = 128; /* must be aligned to 16 */
-+        /* Start copying data after 16 bytes (FD) from the beginning of the internal context */
-+        p_FmSpIntContextDataCopy->intContextOffset = 16;
-+
-+        if (p_BufferPrefixContent->passAllOtherPCDInfo)
-+            p_FmSpBufferOffsets->pcdInfoOffset = p_FmSpIntContextDataCopy->extBufOffset;
-+        if (p_BufferPrefixContent->passPrsResult)
-+            p_FmSpBufferOffsets->prsResultOffset =
-+                (uint32_t)(p_FmSpIntContextDataCopy->extBufOffset + 16);
-+        if (p_BufferPrefixContent->passTimeStamp)
-+            p_FmSpBufferOffsets->timeStampOffset =
-+                (uint32_t)(p_FmSpIntContextDataCopy->extBufOffset + 48);
-+        if (p_BufferPrefixContent->passHashResult)
-+            p_FmSpBufferOffsets->hashResultOffset =
-+                (uint32_t)(p_FmSpIntContextDataCopy->extBufOffset + 56);
-+    }
-+    else
-+    {
-+        /* This case covers the options under 1 */
-+        /* Copy size must be in 16-byte granularity. */
-+        p_FmSpIntContextDataCopy->size =
-+            (uint16_t)((p_BufferPrefixContent->passPrsResult ? 32 : 0) +
-+                      ((p_BufferPrefixContent->passTimeStamp ||
-+                      p_BufferPrefixContent->passHashResult) ? 16 : 0));
-+
-+        /* Align start of internal context data to 16 byte */
-+        p_FmSpIntContextDataCopy->intContextOffset =
-+            (uint8_t)(p_BufferPrefixContent->passPrsResult ? 32 :
-+                      ((p_BufferPrefixContent->passTimeStamp  ||
-+                       p_BufferPrefixContent->passHashResult) ? 64 : 0));
-+
-+        if (p_BufferPrefixContent->passPrsResult)
-+            p_FmSpBufferOffsets->prsResultOffset = p_FmSpIntContextDataCopy->extBufOffset;
-+        if (p_BufferPrefixContent->passTimeStamp)
-+            p_FmSpBufferOffsets->timeStampOffset =  p_BufferPrefixContent->passPrsResult ?
-+                                        (p_FmSpIntContextDataCopy->extBufOffset + sizeof(t_FmPrsResult)) :
-+                                        p_FmSpIntContextDataCopy->extBufOffset;
-+        if (p_BufferPrefixContent->passHashResult)
-+            /* If PR is not requested, whether TS is requested or not, IC will be copied from TS */
-+            p_FmSpBufferOffsets->hashResultOffset = p_BufferPrefixContent->passPrsResult ?
-+                                          (p_FmSpIntContextDataCopy->extBufOffset + sizeof(t_FmPrsResult) + 8) :
-+                                          p_FmSpIntContextDataCopy->extBufOffset + 8;
-+    }
-+
-+    if (p_FmSpIntContextDataCopy->size)
-+        p_FmSpBufMargins->startMargins =
-+            (uint16_t)(p_FmSpIntContextDataCopy->extBufOffset +
-+                       p_FmSpIntContextDataCopy->size);
-+    else
-+        /* No Internal Context passing, STartMargin is immediately after privateInfo */
-+        p_FmSpBufMargins->startMargins = p_BufferPrefixContent->privDataSize;
-+
-+    /* save extra space for manip in both external and internal buffers */
-+    if (p_BufferPrefixContent->manipExtraSpace)
-+    {
-+        uint8_t extraSpace;
-+#ifdef FM_CAPWAP_SUPPORT
-+        if ((p_BufferPrefixContent->manipExtraSpace + CAPWAP_FRAG_EXTRA_SPACE) >= 256)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                         ("p_BufferPrefixContent->manipExtraSpace should be less than %d",
-+                          256-CAPWAP_FRAG_EXTRA_SPACE));
-+        extraSpace = (uint8_t)(p_BufferPrefixContent->manipExtraSpace + CAPWAP_FRAG_EXTRA_SPACE);
-+#else
-+        extraSpace = p_BufferPrefixContent->manipExtraSpace;
-+#endif /* FM_CAPWAP_SUPPORT */
-+        p_FmSpBufferOffsets->manipOffset = p_FmSpBufMargins->startMargins;
-+        p_FmSpBufMargins->startMargins += extraSpace;
-+        *internalBufferOffset = extraSpace;
-+    }
-+
-+    /* align data start */
-+    tmp = (uint32_t)(p_FmSpBufMargins->startMargins % p_BufferPrefixContent->dataAlign);
-+    if (tmp)
-+        p_FmSpBufMargins->startMargins += (p_BufferPrefixContent->dataAlign-tmp);
-+    p_FmSpBufferOffsets->dataOffset = p_FmSpBufMargins->startMargins;
-+
-+    return E_OK;
-+}
-+/*********************** End of inter-module routines ************************/
-+
-+
-+#if (DPAA_VERSION >= 11)
-+/*****************************************************************************/
-+/*              API routines                                                 */
-+/*****************************************************************************/
-+t_Handle FM_VSP_Config(t_FmVspParams *p_FmVspParams)
-+{
-+    t_FmVspEntry          *p_FmVspEntry = NULL;
-+    struct fm_storage_profile_params   fm_vsp_params;
-+
-+    p_FmVspEntry = (t_FmVspEntry *)XX_Malloc(sizeof(t_FmVspEntry));
-+    if (!p_FmVspEntry)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("p_StorageProfile allocation failed"));
-+        return NULL;
-+    }
-+    memset(p_FmVspEntry, 0, sizeof(t_FmVspEntry));
-+
-+    p_FmVspEntry->p_FmVspEntryDriverParams = (t_FmVspEntryDriverParams *)XX_Malloc(sizeof(t_FmVspEntryDriverParams));
-+    if (!p_FmVspEntry->p_FmVspEntryDriverParams)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("p_StorageProfile allocation failed"));
-+        XX_Free(p_FmVspEntry);
-+        return NULL;
-+    }
-+    memset(p_FmVspEntry->p_FmVspEntryDriverParams, 0, sizeof(t_FmVspEntryDriverParams));
-+    fman_vsp_defconfig(&fm_vsp_params);
-+    p_FmVspEntry->p_FmVspEntryDriverParams->dmaHeaderCacheAttr = fm_vsp_params.header_cache_attr;
-+    p_FmVspEntry->p_FmVspEntryDriverParams->dmaIntContextCacheAttr = fm_vsp_params.int_context_cache_attr;
-+    p_FmVspEntry->p_FmVspEntryDriverParams->dmaScatterGatherCacheAttr = fm_vsp_params.scatter_gather_cache_attr;
-+    p_FmVspEntry->p_FmVspEntryDriverParams->dmaSwapData = fm_vsp_params.dma_swap_data;
-+    p_FmVspEntry->p_FmVspEntryDriverParams->dmaWriteOptimize = fm_vsp_params.dma_write_optimize;
-+    p_FmVspEntry->p_FmVspEntryDriverParams->noScatherGather = fm_vsp_params.no_scather_gather;
-+    p_FmVspEntry->p_FmVspEntryDriverParams->bufferPrefixContent.privDataSize = DEFAULT_FM_SP_bufferPrefixContent_privDataSize;
-+    p_FmVspEntry->p_FmVspEntryDriverParams->bufferPrefixContent.passPrsResult= DEFAULT_FM_SP_bufferPrefixContent_passPrsResult;
-+    p_FmVspEntry->p_FmVspEntryDriverParams->bufferPrefixContent.passTimeStamp= DEFAULT_FM_SP_bufferPrefixContent_passTimeStamp;
-+    p_FmVspEntry->p_FmVspEntryDriverParams->bufferPrefixContent.passAllOtherPCDInfo
-+                                                                    = DEFAULT_FM_SP_bufferPrefixContent_passTimeStamp;
-+    p_FmVspEntry->p_FmVspEntryDriverParams->bufferPrefixContent.dataAlign    = DEFAULT_FM_SP_bufferPrefixContent_dataAlign;
-+    p_FmVspEntry->p_FmVspEntryDriverParams->liodnOffset                      = p_FmVspParams->liodnOffset;
-+
-+    memcpy(&p_FmVspEntry->p_FmVspEntryDriverParams->extBufPools, &p_FmVspParams->extBufPools, sizeof(t_FmExtPools));
-+    p_FmVspEntry->h_Fm                                                       = p_FmVspParams->h_Fm;
-+    p_FmVspEntry->portType                                                   = p_FmVspParams->portParams.portType;
-+    p_FmVspEntry->portId                                                     = p_FmVspParams->portParams.portId;
-+
-+    p_FmVspEntry->relativeProfileId                                          = p_FmVspParams->relativeProfileId;
-+
-+   return p_FmVspEntry;
-+}
-+
-+t_Error FM_VSP_Init(t_Handle h_FmVsp)
-+{
-+
-+    t_FmVspEntry                *p_FmVspEntry = (t_FmVspEntry *)h_FmVsp;
-+    struct fm_storage_profile_params   fm_vsp_params;
-+    uint8_t                     orderedArray[FM_PORT_MAX_NUM_OF_EXT_POOLS];
-+    uint16_t                    sizesArray[BM_MAX_NUM_OF_POOLS];
-+    t_Error                     err;
-+    uint16_t                    absoluteProfileId = 0;
-+    int                         i = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry->p_FmVspEntryDriverParams,E_INVALID_HANDLE);
-+
-+    CHECK_INIT_PARAMETERS(p_FmVspEntry, CheckParams);
-+
-+    memset(&orderedArray, 0, sizeof(uint8_t) * FM_PORT_MAX_NUM_OF_EXT_POOLS);
-+    memset(&sizesArray, 0, sizeof(uint16_t) * BM_MAX_NUM_OF_POOLS);
-+
-+    err = FmSpBuildBufferStructure(&p_FmVspEntry->intContext,
-+                                   &p_FmVspEntry->p_FmVspEntryDriverParams->bufferPrefixContent,
-+                                   &p_FmVspEntry->bufMargins,
-+                                   &p_FmVspEntry->bufferOffsets,
-+                                   &p_FmVspEntry->internalBufferOffset);
-+    if (err != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+
-+    err = CheckParamsGeneratedInternally(p_FmVspEntry);
-+    if (err != E_OK)
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+
-+     p_FmVspEntry->p_FmSpRegsBase =
-+        (struct fm_pcd_storage_profile_regs *)FmGetVSPBaseAddr(p_FmVspEntry->h_Fm);
-+    if (!p_FmVspEntry->p_FmSpRegsBase)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("impossible to initialize SpRegsBase"));
-+
-+    /* order external buffer pools in ascending order of buffer pools sizes */
-+    FmSpSetBufPoolsInAscOrderOfBufSizes(&(p_FmVspEntry->p_FmVspEntryDriverParams)->extBufPools,
-+                                        orderedArray,
-+                                        sizesArray);
-+
-+    p_FmVspEntry->extBufPools.numOfPoolsUsed =
-+        p_FmVspEntry->p_FmVspEntryDriverParams->extBufPools.numOfPoolsUsed;
-+    for (i = 0; i < p_FmVspEntry->extBufPools.numOfPoolsUsed; i++)
-+    {
-+       p_FmVspEntry->extBufPools.extBufPool[i].id = orderedArray[i];
-+       p_FmVspEntry->extBufPools.extBufPool[i].size = sizesArray[orderedArray[i]];
-+    }
-+
-+    /* on user responsibility to fill it according requirement */
-+    memset(&fm_vsp_params, 0, sizeof(struct fm_storage_profile_params));
-+    fm_vsp_params.dma_swap_data              = p_FmVspEntry->p_FmVspEntryDriverParams->dmaSwapData;
-+    fm_vsp_params.int_context_cache_attr     = p_FmVspEntry->p_FmVspEntryDriverParams->dmaIntContextCacheAttr;
-+    fm_vsp_params.header_cache_attr          = p_FmVspEntry->p_FmVspEntryDriverParams->dmaHeaderCacheAttr;
-+    fm_vsp_params.scatter_gather_cache_attr  = p_FmVspEntry->p_FmVspEntryDriverParams->dmaScatterGatherCacheAttr;
-+    fm_vsp_params.dma_write_optimize         = p_FmVspEntry->p_FmVspEntryDriverParams->dmaWriteOptimize;
-+    fm_vsp_params.liodn_offset               = p_FmVspEntry->p_FmVspEntryDriverParams->liodnOffset;
-+    fm_vsp_params.no_scather_gather          = p_FmVspEntry->p_FmVspEntryDriverParams->noScatherGather;
-+
-+    if (p_FmVspEntry->p_FmVspEntryDriverParams->p_BufPoolDepletion)
-+    {
-+        fm_vsp_params.buf_pool_depletion.buf_pool_depletion_enabled = TRUE;
-+        fm_vsp_params.buf_pool_depletion.pools_grp_mode_enable = p_FmVspEntry->p_FmVspEntryDriverParams->p_BufPoolDepletion->poolsGrpModeEnable;
-+        fm_vsp_params.buf_pool_depletion.num_pools = p_FmVspEntry->p_FmVspEntryDriverParams->p_BufPoolDepletion->numOfPools;
-+        fm_vsp_params.buf_pool_depletion.pools_to_consider = p_FmVspEntry->p_FmVspEntryDriverParams->p_BufPoolDepletion->poolsToConsider;
-+        fm_vsp_params.buf_pool_depletion.single_pool_mode_enable = p_FmVspEntry->p_FmVspEntryDriverParams->p_BufPoolDepletion->singlePoolModeEnable;
-+        fm_vsp_params.buf_pool_depletion.pools_to_consider_for_single_mode = p_FmVspEntry->p_FmVspEntryDriverParams->p_BufPoolDepletion->poolsToConsiderForSingleMode;
-+        fm_vsp_params.buf_pool_depletion.has_pfc_priorities = TRUE;
-+        fm_vsp_params.buf_pool_depletion.pfc_priorities_en = p_FmVspEntry->p_FmVspEntryDriverParams->p_BufPoolDepletion->pfcPrioritiesEn;
-+    }
-+    else
-+        fm_vsp_params.buf_pool_depletion.buf_pool_depletion_enabled = FALSE;
-+ 
-+    if (p_FmVspEntry->p_FmVspEntryDriverParams->p_BackupBmPools)
-+    {
-+        fm_vsp_params.backup_pools.num_backup_pools = p_FmVspEntry->p_FmVspEntryDriverParams->p_BackupBmPools->numOfBackupPools;
-+        fm_vsp_params.backup_pools.pool_ids = p_FmVspEntry->p_FmVspEntryDriverParams->p_BackupBmPools->poolIds;
-+    }
-+    else
-+        fm_vsp_params.backup_pools.num_backup_pools = 0;
-+
-+    fm_vsp_params.fm_ext_pools.num_pools_used = p_FmVspEntry->extBufPools.numOfPoolsUsed;
-+    fm_vsp_params.fm_ext_pools.ext_buf_pool = (struct fman_ext_pool_params*)&p_FmVspEntry->extBufPools.extBufPool;
-+    fm_vsp_params.buf_margins = (struct fman_sp_buf_margins*)&p_FmVspEntry->bufMargins;
-+    fm_vsp_params.int_context = (struct fman_sp_int_context_data_copy*)&p_FmVspEntry->intContext;
-+
-+    /* no check on err - it was checked earlier */
-+    FmVSPGetAbsoluteProfileId(p_FmVspEntry->h_Fm,
-+                              p_FmVspEntry->portType,
-+                              p_FmVspEntry->portId,
-+                              p_FmVspEntry->relativeProfileId,
-+                              &absoluteProfileId);
-+
-+    ASSERT_COND(p_FmVspEntry->p_FmSpRegsBase);
-+    ASSERT_COND(fm_vsp_params.int_context);
-+    ASSERT_COND(fm_vsp_params.buf_margins);
-+    ASSERT_COND((absoluteProfileId <= FM_VSP_MAX_NUM_OF_ENTRIES));
-+
-+    /* Set all registers related to VSP */
-+    fman_vsp_init(p_FmVspEntry->p_FmSpRegsBase, absoluteProfileId, &fm_vsp_params,FM_PORT_MAX_NUM_OF_EXT_POOLS, BM_MAX_NUM_OF_POOLS, FM_MAX_NUM_OF_PFC_PRIORITIES);
-+
-+    p_FmVspEntry->absoluteSpId = absoluteProfileId;
-+
-+    if (p_FmVspEntry->p_FmVspEntryDriverParams)
-+        XX_Free(p_FmVspEntry->p_FmVspEntryDriverParams);
-+    p_FmVspEntry->p_FmVspEntryDriverParams = NULL;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_VSP_Free(t_Handle h_FmVsp)
-+{
-+    t_FmVspEntry   *p_FmVspEntry = (t_FmVspEntry *)h_FmVsp;
-+    SANITY_CHECK_RETURN_ERROR(h_FmVsp, E_INVALID_HANDLE);
-+    XX_Free(p_FmVspEntry);
-+    return E_OK;
-+}
-+
-+t_Error FM_VSP_ConfigBufferPrefixContent(t_Handle h_FmVsp, t_FmBufferPrefixContent *p_FmBufferPrefixContent)
-+{
-+    t_FmVspEntry *p_FmVspEntry = (t_FmVspEntry*)h_FmVsp;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry->p_FmVspEntryDriverParams, E_INVALID_HANDLE);
-+
-+    memcpy(&p_FmVspEntry->p_FmVspEntryDriverParams->bufferPrefixContent, p_FmBufferPrefixContent, sizeof(t_FmBufferPrefixContent));
-+    /* if dataAlign was not initialized by user, we return to driver's default */
-+    if (!p_FmVspEntry->p_FmVspEntryDriverParams->bufferPrefixContent.dataAlign)
-+        p_FmVspEntry->p_FmVspEntryDriverParams->bufferPrefixContent.dataAlign = DEFAULT_FM_SP_bufferPrefixContent_dataAlign;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_VSP_ConfigDmaSwapData(t_Handle h_FmVsp, e_FmDmaSwapOption swapData)
-+{
-+    t_FmVspEntry *p_FmVspEntry = (t_FmVspEntry*)h_FmVsp;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry->p_FmVspEntryDriverParams, E_INVALID_HANDLE);
-+
-+    p_FmVspEntry->p_FmVspEntryDriverParams->dmaSwapData = swapData;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_VSP_ConfigDmaIcCacheAttr(t_Handle h_FmVsp, e_FmDmaCacheOption intContextCacheAttr)
-+{
-+    t_FmVspEntry *p_FmVspEntry = (t_FmVspEntry*)h_FmVsp;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry->p_FmVspEntryDriverParams, E_INVALID_HANDLE);
-+
-+    p_FmVspEntry->p_FmVspEntryDriverParams->dmaIntContextCacheAttr = intContextCacheAttr;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_VSP_ConfigDmaHdrAttr(t_Handle h_FmVsp, e_FmDmaCacheOption headerCacheAttr)
-+{
-+    t_FmVspEntry *p_FmVspEntry = (t_FmVspEntry*)h_FmVsp;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry->p_FmVspEntryDriverParams, E_INVALID_HANDLE);
-+
-+    p_FmVspEntry->p_FmVspEntryDriverParams->dmaHeaderCacheAttr = headerCacheAttr;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_VSP_ConfigDmaScatterGatherAttr(t_Handle h_FmVsp, e_FmDmaCacheOption scatterGatherCacheAttr)
-+{
-+    t_FmVspEntry *p_FmVspEntry = (t_FmVspEntry*)h_FmVsp;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry->p_FmVspEntryDriverParams, E_INVALID_HANDLE);
-+
-+     p_FmVspEntry->p_FmVspEntryDriverParams->dmaScatterGatherCacheAttr = scatterGatherCacheAttr;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_VSP_ConfigDmaWriteOptimize(t_Handle h_FmVsp, bool optimize)
-+{
-+    t_FmVspEntry *p_FmVspEntry = (t_FmVspEntry*)h_FmVsp;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry->p_FmVspEntryDriverParams, E_INVALID_HANDLE);
-+
-+
-+    p_FmVspEntry->p_FmVspEntryDriverParams->dmaWriteOptimize = optimize;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_VSP_ConfigNoScatherGather(t_Handle h_FmVsp, bool noScatherGather)
-+{
-+    t_FmVspEntry *p_FmVspEntry = (t_FmVspEntry*)h_FmVsp;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry->p_FmVspEntryDriverParams, E_INVALID_HANDLE);
-+
-+
-+    p_FmVspEntry->p_FmVspEntryDriverParams->noScatherGather = noScatherGather;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_VSP_ConfigPoolDepletion(t_Handle h_FmVsp, t_FmBufPoolDepletion *p_BufPoolDepletion)
-+{
-+    t_FmVspEntry *p_FmVspEntry = (t_FmVspEntry*)h_FmVsp;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmVsp, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry->p_FmVspEntryDriverParams, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_BufPoolDepletion, E_INVALID_HANDLE);
-+
-+    p_FmVspEntry->p_FmVspEntryDriverParams->p_BufPoolDepletion = (t_FmBufPoolDepletion *)XX_Malloc(sizeof(t_FmBufPoolDepletion));
-+    if (!p_FmVspEntry->p_FmVspEntryDriverParams->p_BufPoolDepletion)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("p_BufPoolDepletion allocation failed"));
-+    memcpy(p_FmVspEntry->p_FmVspEntryDriverParams->p_BufPoolDepletion, p_BufPoolDepletion, sizeof(t_FmBufPoolDepletion));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_VSP_ConfigBackupPools(t_Handle h_FmVsp, t_FmBackupBmPools *p_BackupBmPools)
-+{
-+    t_FmVspEntry *p_FmVspEntry = (t_FmVspEntry*)h_FmVsp;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmVsp, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmVspEntry->p_FmVspEntryDriverParams, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_BackupBmPools, E_INVALID_HANDLE);
-+
-+    p_FmVspEntry->p_FmVspEntryDriverParams->p_BackupBmPools = (t_FmBackupBmPools *)XX_Malloc(sizeof(t_FmBackupBmPools));
-+    if (!p_FmVspEntry->p_FmVspEntryDriverParams->p_BackupBmPools)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("p_BackupBmPools allocation failed"));
-+    memcpy(p_FmVspEntry->p_FmVspEntryDriverParams->p_BackupBmPools, p_BackupBmPools, sizeof(t_FmBackupBmPools));
-+
-+    return E_OK;
-+}
-+
-+uint32_t FM_VSP_GetBufferDataOffset(t_Handle h_FmVsp)
-+{
-+    t_FmVspEntry *p_FmVspEntry = (t_FmVspEntry*)h_FmVsp;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmVspEntry, E_INVALID_HANDLE, 0);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmVspEntry->p_FmVspEntryDriverParams, E_INVALID_STATE, 0);
-+
-+    return p_FmVspEntry->bufferOffsets.dataOffset;
-+}
-+
-+uint8_t * FM_VSP_GetBufferICInfo(t_Handle h_FmVsp, char *p_Data)
-+{
-+    t_FmVspEntry *p_FmVspEntry = (t_FmVspEntry*)h_FmVsp;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmVspEntry, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmVspEntry->p_FmVspEntryDriverParams, E_INVALID_STATE, NULL);
-+
-+    if (p_FmVspEntry->bufferOffsets.pcdInfoOffset == ILLEGAL_BASE)
-+        return NULL;
-+
-+    return (uint8_t *)PTR_MOVE(p_Data, p_FmVspEntry->bufferOffsets.pcdInfoOffset);
-+}
-+
-+t_FmPrsResult * FM_VSP_GetBufferPrsResult(t_Handle h_FmVsp, char *p_Data)
-+{
-+    t_FmVspEntry *p_FmVspEntry = (t_FmVspEntry*)h_FmVsp;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmVspEntry, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmVspEntry->p_FmVspEntryDriverParams, E_INVALID_STATE, NULL);
-+
-+    if (p_FmVspEntry->bufferOffsets.prsResultOffset == ILLEGAL_BASE)
-+        return NULL;
-+
-+    return (t_FmPrsResult *)PTR_MOVE(p_Data, p_FmVspEntry->bufferOffsets.prsResultOffset);
-+}
-+
-+uint64_t * FM_VSP_GetBufferTimeStamp(t_Handle h_FmVsp, char *p_Data)
-+{
-+    t_FmVspEntry *p_FmVspEntry = (t_FmVspEntry*)h_FmVsp;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmVspEntry, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmVspEntry->p_FmVspEntryDriverParams, E_INVALID_STATE, NULL);
-+
-+    if (p_FmVspEntry->bufferOffsets.timeStampOffset == ILLEGAL_BASE)
-+        return NULL;
-+
-+    return (uint64_t *)PTR_MOVE(p_Data, p_FmVspEntry->bufferOffsets.timeStampOffset);
-+}
-+
-+uint8_t * FM_VSP_GetBufferHashResult(t_Handle h_FmVsp, char *p_Data)
-+{
-+    t_FmVspEntry *p_FmVspEntry = (t_FmVspEntry*)h_FmVsp;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmVspEntry, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(!p_FmVspEntry->p_FmVspEntryDriverParams, E_INVALID_STATE, NULL);
-+
-+    if (p_FmVspEntry->bufferOffsets.hashResultOffset == ILLEGAL_BASE)
-+        return NULL;
-+
-+    return (uint8_t *)PTR_MOVE(p_Data, p_FmVspEntry->bufferOffsets.hashResultOffset);
-+}
-+
-+#endif /* (DPAA_VERSION >= 11) */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/SP/fm_sp.h
-@@ -0,0 +1,85 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_sp.h
-+
-+ @Description   FM SP  ...
-+*//***************************************************************************/
-+#ifndef __FM_SP_H
-+#define __FM_SP_H
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "list_ext.h"
-+
-+#include "fm_sp_common.h"
-+#include "fm_common.h"
-+
-+
-+#define __ERR_MODULE__  MODULE_FM_SP
-+
-+typedef struct {
-+    t_FmBufferPrefixContent             bufferPrefixContent;
-+    e_FmDmaSwapOption                   dmaSwapData;
-+    e_FmDmaCacheOption                  dmaIntContextCacheAttr;
-+    e_FmDmaCacheOption                  dmaHeaderCacheAttr;
-+    e_FmDmaCacheOption                  dmaScatterGatherCacheAttr;
-+    bool                                dmaWriteOptimize;
-+    uint16_t                            liodnOffset;
-+    bool                                noScatherGather;
-+    t_FmBufPoolDepletion                *p_BufPoolDepletion;
-+    t_FmBackupBmPools                   *p_BackupBmPools;
-+    t_FmExtPools                        extBufPools;
-+} t_FmVspEntryDriverParams;
-+
-+typedef struct {
-+    bool                        valid;
-+    volatile bool               lock;
-+    uint8_t                     pointedOwners;
-+    uint16_t                    absoluteSpId;
-+    uint8_t                     internalBufferOffset;
-+    t_FmSpBufMargins            bufMargins;
-+    t_FmSpIntContextDataCopy    intContext;
-+    t_FmSpBufferOffsets         bufferOffsets;
-+    t_Handle                    h_Fm;
-+    e_FmPortType                portType;           /**< Port type */
-+    uint8_t                     portId;             /**< Port Id - relative to type */
-+    uint8_t                     relativeProfileId;
-+    struct fm_pcd_storage_profile_regs *p_FmSpRegsBase;
-+    t_FmExtPools                extBufPools;
-+    t_FmVspEntryDriverParams    *p_FmVspEntryDriverParams;
-+} t_FmVspEntry;
-+
-+
-+#endif /* __FM_SP_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/SP/fman_sp.c
-@@ -0,0 +1,197 @@
-+/*
-+ * Copyright 2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "fsl_fman_sp.h"
-+
-+
-+uint32_t fman_vsp_get_statistics(struct fm_pcd_storage_profile_regs   *regs,
-+                    uint16_t                      index)
-+{
-+    struct fm_pcd_storage_profile_regs *sp_regs;
-+    sp_regs = &regs[index];
-+    return ioread32be(&sp_regs->fm_sp_acnt);
-+}
-+
-+void fman_vsp_set_statistics(struct fm_pcd_storage_profile_regs *regs,
-+            uint16_t index,	uint32_t value)
-+{
-+    struct fm_pcd_storage_profile_regs *sp_regs;
-+    sp_regs = &regs[index];
-+    iowrite32be(value, &sp_regs->fm_sp_acnt);
-+}
-+
-+void fman_vsp_defconfig(struct fm_storage_profile_params *cfg)
-+{
-+    cfg->dma_swap_data =
-+            DEFAULT_FMAN_SP_DMA_SWAP_DATA;
-+    cfg->int_context_cache_attr =
-+            DEFAULT_FMAN_SP_DMA_INT_CONTEXT_CACHE_ATTR;
-+    cfg->header_cache_attr =
-+            DEFAULT_FMAN_SP_DMA_HEADER_CACHE_ATTR;
-+    cfg->scatter_gather_cache_attr =
-+            DEFAULT_FMAN_SP_DMA_SCATTER_GATHER_CACHE_ATTR;
-+    cfg->dma_write_optimize =
-+            DEFAULT_FMAN_SP_DMA_WRITE_OPTIMIZE;
-+    cfg->no_scather_gather =
-+            DEFAULT_FMAN_SP_NO_SCATTER_GATHER;
-+}
-+
-+static inline uint32_t calc_vec_dep(int max_pools, bool *pools,
-+        struct fman_ext_pools *ext_buf_pools, uint32_t mask)
-+{
-+    int i, j;
-+    uint32_t vector = 0;
-+    for (i = 0; i < max_pools; i++)
-+        if (pools[i])
-+            for (j = 0; j < ext_buf_pools->num_pools_used; j++)
-+                if (i == ext_buf_pools->ext_buf_pool[j].id) {
-+                    vector |= mask >> j;
-+                    break;
-+                }
-+    return vector;
-+}
-+
-+void fman_vsp_init(struct fm_pcd_storage_profile_regs   *regs,
-+    uint16_t index, struct fm_storage_profile_params *fm_vsp_params,
-+    int port_max_num_of_ext_pools, int bm_max_num_of_pools,
-+    int max_num_of_pfc_priorities)
-+{
-+    int i = 0, j = 0;
-+    struct fm_pcd_storage_profile_regs *sp_regs;
-+    uint32_t tmp_reg, vector;
-+    struct fman_ext_pools *ext_buf_pools = &fm_vsp_params->fm_ext_pools;
-+    struct fman_buf_pool_depletion *buf_pool_depletion =
-+                    &fm_vsp_params->buf_pool_depletion;
-+    struct fman_backup_bm_pools *backup_pools =
-+                    &fm_vsp_params->backup_pools;
-+    struct fman_sp_int_context_data_copy *int_context_data_copy =
-+                        fm_vsp_params->int_context;
-+    struct fman_sp_buf_margins *external_buffer_margins =
-+                        fm_vsp_params->buf_margins;
-+    bool no_scather_gather = fm_vsp_params->no_scather_gather;
-+    uint16_t liodn_offset = fm_vsp_params->liodn_offset;
-+
-+    sp_regs = &regs[index];
-+
-+    /* fill external buffers manager pool information register*/
-+    for (i = 0; i < ext_buf_pools->num_pools_used; i++) {
-+        tmp_reg = FMAN_SP_EXT_BUF_POOL_VALID |
-+            FMAN_SP_EXT_BUF_POOL_EN_COUNTER;
-+        tmp_reg |= ((uint32_t)ext_buf_pools->ext_buf_pool[i].id <<
-+            FMAN_SP_EXT_BUF_POOL_ID_SHIFT);
-+        tmp_reg |= ext_buf_pools->ext_buf_pool[i].size;
-+        /* functionality available only for some deriviatives
-+             (limited by config) */
-+        for (j = 0; j < backup_pools->num_backup_pools; j++)
-+            if (ext_buf_pools->ext_buf_pool[i].id ==
-+                backup_pools->pool_ids[j]) {
-+                tmp_reg |= FMAN_SP_EXT_BUF_POOL_BACKUP;
-+                break;
-+            }
-+        iowrite32be(tmp_reg, &sp_regs->fm_sp_ebmpi[i]);
-+    }
-+
-+    /* clear unused pools */
-+    for (i = ext_buf_pools->num_pools_used;
-+        i < port_max_num_of_ext_pools; i++)
-+        iowrite32be(0, &sp_regs->fm_sp_ebmpi[i]);
-+
-+    /* fill pool depletion register*/
-+    tmp_reg = 0;
-+    if (buf_pool_depletion->buf_pool_depletion_enabled && buf_pool_depletion->pools_grp_mode_enable) {
-+        /* calculate vector for number of pools depletion */
-+        vector = calc_vec_dep(bm_max_num_of_pools, buf_pool_depletion->
-+                pools_to_consider, ext_buf_pools, 0x80000000);
-+
-+        /* configure num of pools and vector for number of pools mode */
-+        tmp_reg |= (((uint32_t)buf_pool_depletion->num_pools - 1) <<
-+            FMAN_SP_POOL_DEP_NUM_OF_POOLS_SHIFT);
-+        tmp_reg |= vector;
-+    }
-+
-+    if (buf_pool_depletion->buf_pool_depletion_enabled && buf_pool_depletion->single_pool_mode_enable) {
-+        /* calculate vector for number of pools depletion */
-+        vector = calc_vec_dep(bm_max_num_of_pools, buf_pool_depletion->
-+                pools_to_consider_for_single_mode,
-+                ext_buf_pools, 0x00000080);
-+
-+        /* configure num of pools and vector for number of pools mode */
-+        tmp_reg |= vector;
-+    }
-+
-+    /* fill QbbPEV */
-+    if (buf_pool_depletion->buf_pool_depletion_enabled) {
-+        vector = 0;
-+        for (i = 0; i < max_num_of_pfc_priorities; i++)
-+            if (buf_pool_depletion->pfc_priorities_en[i] == TRUE)
-+                vector |= 0x00000100 << i;
-+        tmp_reg |= vector;
-+    }
-+    iowrite32be(tmp_reg, &sp_regs->fm_sp_mpd);
-+
-+    /* fill dma attributes register */
-+    tmp_reg = 0;
-+    tmp_reg |= (uint32_t)fm_vsp_params->dma_swap_data <<
-+        FMAN_SP_DMA_ATTR_SWP_SHIFT;
-+    tmp_reg |= (uint32_t)fm_vsp_params->int_context_cache_attr <<
-+        FMAN_SP_DMA_ATTR_IC_CACHE_SHIFT;
-+    tmp_reg |= (uint32_t)fm_vsp_params->header_cache_attr <<
-+        FMAN_SP_DMA_ATTR_HDR_CACHE_SHIFT;
-+    tmp_reg |= (uint32_t)fm_vsp_params->scatter_gather_cache_attr <<
-+        FMAN_SP_DMA_ATTR_SG_CACHE_SHIFT;
-+    if (fm_vsp_params->dma_write_optimize)
-+        tmp_reg |= FMAN_SP_DMA_ATTR_WRITE_OPTIMIZE;
-+    iowrite32be(tmp_reg, &sp_regs->fm_sp_da);
-+
-+    /* IC parameters - fill internal context parameters register */
-+    tmp_reg = 0;
-+    tmp_reg |= (((uint32_t)int_context_data_copy->ext_buf_offset/
-+        OFFSET_UNITS) << FMAN_SP_IC_TO_EXT_SHIFT);
-+    tmp_reg |= (((uint32_t)int_context_data_copy->int_context_offset/
-+        OFFSET_UNITS) << FMAN_SP_IC_FROM_INT_SHIFT);
-+    tmp_reg |= (((uint32_t)int_context_data_copy->size/OFFSET_UNITS) <<
-+        FMAN_SP_IC_SIZE_SHIFT);
-+    iowrite32be(tmp_reg, &sp_regs->fm_sp_icp);
-+
-+    /* buffer margins - fill external buffer margins register */
-+    tmp_reg = 0;
-+    tmp_reg |= (((uint32_t)external_buffer_margins->start_margins) <<
-+        FMAN_SP_EXT_BUF_MARG_START_SHIFT);
-+    tmp_reg |= (((uint32_t)external_buffer_margins->end_margins) <<
-+        FMAN_SP_EXT_BUF_MARG_END_SHIFT);
-+    if (no_scather_gather)
-+        tmp_reg |= FMAN_SP_SG_DISABLE;
-+    iowrite32be(tmp_reg, &sp_regs->fm_sp_ebm);
-+
-+    /* buffer margins - fill spliodn register */
-+    iowrite32be(liodn_offset, &sp_regs->fm_sp_spliodn);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm.c
-@@ -0,0 +1,5216 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm.c
-+
-+ @Description   FM driver routines implementation.
-+*//***************************************************************************/
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "xx_ext.h"
-+#include "string_ext.h"
-+#include "sprint_ext.h"
-+#include "debug_ext.h"
-+#include "fm_muram_ext.h"
-+#include <linux/math64.h>
-+
-+#include "fm_common.h"
-+#include "fm_ipc.h"
-+#include "fm.h"
-+#ifndef CONFIG_FMAN_ARM
-+#include <linux/fsl/svr.h>
-+#endif
-+#include "fsl_fman.h"
-+
-+
-+/****************************************/
-+/*       static functions               */
-+/****************************************/
-+
-+static volatile bool blockingFlag = FALSE;
-+static void IpcMsgCompletionCB(t_Handle   h_Fm,
-+                               uint8_t    *p_Msg,
-+                               uint8_t    *p_Reply,
-+                               uint32_t   replyLength,
-+                               t_Error    status)
-+{
-+    UNUSED(h_Fm);UNUSED(p_Msg);UNUSED(p_Reply);UNUSED(replyLength);UNUSED(status);
-+    blockingFlag = FALSE;
-+}
-+
-+static void FreeInitResources(t_Fm *p_Fm)
-+{
-+    if (p_Fm->camBaseAddr)
-+       FM_MURAM_FreeMem(p_Fm->h_FmMuram, UINT_TO_PTR(p_Fm->camBaseAddr));
-+    if (p_Fm->fifoBaseAddr)
-+       FM_MURAM_FreeMem(p_Fm->h_FmMuram, UINT_TO_PTR(p_Fm->fifoBaseAddr));
-+    if (p_Fm->resAddr)
-+       FM_MURAM_FreeMem(p_Fm->h_FmMuram, UINT_TO_PTR(p_Fm->resAddr));
-+}
-+
-+static bool IsFmanCtrlCodeLoaded(t_Fm *p_Fm)
-+{
-+    t_FMIramRegs    *p_Iram;
-+
-+    ASSERT_COND(p_Fm);
-+    p_Iram = (t_FMIramRegs *)UINT_TO_PTR(p_Fm->baseAddr + FM_MM_IMEM);
-+
-+    return (bool)!!(GET_UINT32(p_Iram->iready) & IRAM_READY);
-+}
-+
-+static t_Error CheckFmParameters(t_Fm *p_Fm)
-+{
-+    if (IsFmanCtrlCodeLoaded(p_Fm) && !p_Fm->resetOnInit)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Old FMan CTRL code is loaded; FM must be reset!"));
-+#if (DPAA_VERSION < 11)
-+    if (!p_Fm->p_FmDriverParam->dma_axi_dbg_num_of_beats ||
-+        (p_Fm->p_FmDriverParam->dma_axi_dbg_num_of_beats > DMA_MODE_MAX_AXI_DBG_NUM_OF_BEATS))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("axiDbgNumOfBeats has to be in the range 1 - %d", DMA_MODE_MAX_AXI_DBG_NUM_OF_BEATS));
-+#endif /* (DPAA_VERSION < 11) */
-+    if (p_Fm->p_FmDriverParam->dma_cam_num_of_entries % DMA_CAM_UNITS)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dma_cam_num_of_entries has to be divisble by %d", DMA_CAM_UNITS));
-+//    if (!p_Fm->p_FmDriverParam->dma_cam_num_of_entries || (p_Fm->p_FmDriverParam->dma_cam_num_of_entries > DMA_MODE_MAX_CAM_NUM_OF_ENTRIES))
-+//        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dma_cam_num_of_entries has to be in the range 1 - %d", DMA_MODE_MAX_CAM_NUM_OF_ENTRIES));
-+    if (p_Fm->p_FmDriverParam->dma_comm_qtsh_asrt_emer > DMA_THRESH_MAX_COMMQ)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dma_comm_qtsh_asrt_emer can not be larger than %d", DMA_THRESH_MAX_COMMQ));
-+    if (p_Fm->p_FmDriverParam->dma_comm_qtsh_clr_emer > DMA_THRESH_MAX_COMMQ)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dma_comm_qtsh_clr_emer can not be larger than %d", DMA_THRESH_MAX_COMMQ));
-+    if (p_Fm->p_FmDriverParam->dma_comm_qtsh_clr_emer >= p_Fm->p_FmDriverParam->dma_comm_qtsh_asrt_emer)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dma_comm_qtsh_clr_emer must be smaller than dma_comm_qtsh_asrt_emer"));
-+#if (DPAA_VERSION < 11)
-+    if (p_Fm->p_FmDriverParam->dma_read_buf_tsh_asrt_emer > DMA_THRESH_MAX_BUF)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dma_read_buf_tsh_asrt_emer can not be larger than %d", DMA_THRESH_MAX_BUF));
-+    if (p_Fm->p_FmDriverParam->dma_read_buf_tsh_clr_emer > DMA_THRESH_MAX_BUF)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dma_read_buf_tsh_clr_emer can not be larger than %d", DMA_THRESH_MAX_BUF));
-+    if (p_Fm->p_FmDriverParam->dma_read_buf_tsh_clr_emer >= p_Fm->p_FmDriverParam->dma_read_buf_tsh_asrt_emer)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dma_read_buf_tsh_clr_emer must be smaller than dma_read_buf_tsh_asrt_emer"));
-+    if (p_Fm->p_FmDriverParam->dma_write_buf_tsh_asrt_emer > DMA_THRESH_MAX_BUF)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dma_write_buf_tsh_asrt_emer can not be larger than %d", DMA_THRESH_MAX_BUF));
-+    if (p_Fm->p_FmDriverParam->dma_write_buf_tsh_clr_emer > DMA_THRESH_MAX_BUF)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dma_write_buf_tsh_clr_emer can not be larger than %d", DMA_THRESH_MAX_BUF));
-+    if (p_Fm->p_FmDriverParam->dma_write_buf_tsh_clr_emer >= p_Fm->p_FmDriverParam->dma_write_buf_tsh_asrt_emer)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dma_write_buf_tsh_clr_emer must be smaller than dma_write_buf_tsh_asrt_emer"));
-+#else /* (DPAA_VERSION >= 11) */
-+    if ((p_Fm->p_FmDriverParam->dma_dbg_cnt_mode == E_FMAN_DMA_DBG_CNT_INT_READ_EM)||
-+            (p_Fm->p_FmDriverParam->dma_dbg_cnt_mode == E_FMAN_DMA_DBG_CNT_INT_WRITE_EM) ||
-+            (p_Fm->p_FmDriverParam->dma_dbg_cnt_mode == E_FMAN_DMA_DBG_CNT_RAW_WAR_PROT))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dma_dbg_cnt_mode value not supported by this integration."));
-+    if ((p_Fm->p_FmDriverParam->dma_emergency_bus_select == FM_DMA_MURAM_READ_EMERGENCY)||
-+            (p_Fm->p_FmDriverParam->dma_emergency_bus_select == FM_DMA_MURAM_WRITE_EMERGENCY))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("emergencyBusSelect value not supported by this integration."));
-+    if (p_Fm->p_FmDriverParam->dma_stop_on_bus_error)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dma_stop_on_bus_error not supported by this integration."));
-+#ifdef FM_AID_MODE_NO_TNUM_SW005
-+    if (p_Fm->p_FmDriverParam->dma_aid_mode != E_FMAN_DMA_AID_OUT_PORT_ID)
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dma_aid_mode not supported by this integration."));
-+#endif /* FM_AID_MODE_NO_TNUM_SW005 */
-+    if (p_Fm->p_FmDriverParam->dma_axi_dbg_num_of_beats)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("dma_axi_dbg_num_of_beats not supported by this integration."));
-+#endif /* (DPAA_VERSION < 11) */
-+
-+    if (!p_Fm->p_FmStateStruct->fmClkFreq)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("fmClkFreq must be set."));
-+    if (USEC_TO_CLK(p_Fm->p_FmDriverParam->dma_watchdog, p_Fm->p_FmStateStruct->fmClkFreq) > DMA_MAX_WATCHDOG)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("dma_watchdog depends on FM clock. dma_watchdog(in microseconds) * clk (in Mhz), may not exceed 0x08x", DMA_MAX_WATCHDOG));
-+
-+#if (DPAA_VERSION >= 11)
-+    if ((p_Fm->partVSPBase + p_Fm->partNumOfVSPs) > FM_VSP_MAX_NUM_OF_ENTRIES)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("partVSPBase+partNumOfVSPs out of range!!!"));
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    if (p_Fm->p_FmStateStruct->totalFifoSize % BMI_FIFO_UNITS)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("totalFifoSize number has to be divisible by %d", BMI_FIFO_UNITS));
-+    if (!p_Fm->p_FmStateStruct->totalFifoSize ||
-+        (p_Fm->p_FmStateStruct->totalFifoSize > BMI_MAX_FIFO_SIZE))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("totalFifoSize (currently defined as %d) has to be in the range of 256 to %d",
-+                      p_Fm->p_FmStateStruct->totalFifoSize,
-+                      BMI_MAX_FIFO_SIZE));
-+    if (!p_Fm->p_FmStateStruct->totalNumOfTasks ||
-+        (p_Fm->p_FmStateStruct->totalNumOfTasks > BMI_MAX_NUM_OF_TASKS))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("totalNumOfTasks number has to be in the range 1 - %d", BMI_MAX_NUM_OF_TASKS));
-+
-+#ifdef FM_HAS_TOTAL_DMAS
-+    if (!p_Fm->p_FmStateStruct->maxNumOfOpenDmas ||
-+        (p_Fm->p_FmStateStruct->maxNumOfOpenDmas > BMI_MAX_NUM_OF_DMAS))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("maxNumOfOpenDmas number has to be in the range 1 - %d", BMI_MAX_NUM_OF_DMAS));
-+#endif /* FM_HAS_TOTAL_DMAS */
-+
-+    if (p_Fm->p_FmDriverParam->disp_limit_tsh > FPM_MAX_DISP_LIMIT)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("disp_limit_tsh can't be greater than %d", FPM_MAX_DISP_LIMIT));
-+
-+    if (!p_Fm->f_Exception)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Exceptions callback not provided"));
-+    if (!p_Fm->f_BusError)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Exceptions callback not provided"));
-+
-+#ifdef FM_NO_WATCHDOG
-+    if ((p_Fm->p_FmStateStruct->revInfo.majorRev == 2) &&
-+        (p_Fm->p_FmDriverParam->dma_watchdog))
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("watchdog!"));
-+#endif /* FM_NO_WATCHDOG */
-+
-+#ifdef FM_ECC_HALT_NO_SYNC_ERRATA_10GMAC_A008
-+    if ((p_Fm->p_FmStateStruct->revInfo.majorRev < 6) &&
-+        (p_Fm->p_FmDriverParam->halt_on_unrecov_ecc_err))
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("HaltOnEccError!"));
-+#endif /* FM_ECC_HALT_NO_SYNC_ERRATA_10GMAC_A008 */
-+
-+#ifdef FM_NO_TNUM_AGING
-+    if ((p_Fm->p_FmStateStruct->revInfo.majorRev != 4) &&
-+        (p_Fm->p_FmStateStruct->revInfo.majorRev < 6))
-+        if (p_Fm->p_FmDriverParam->tnum_aging_period)
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("Tnum aging!"));
-+#endif /* FM_NO_TNUM_AGING */
-+
-+    /* check that user did not set revision-dependent exceptions */
-+#ifdef FM_NO_DISPATCH_RAM_ECC
-+    if ((p_Fm->p_FmStateStruct->revInfo.majorRev != 4) &&
-+        (p_Fm->p_FmStateStruct->revInfo.majorRev < 6))
-+        if (p_Fm->userSetExceptions & FM_EX_BMI_DISPATCH_RAM_ECC)
-+            RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("exception e_FM_EX_BMI_DISPATCH_RAM_ECC!"));
-+#endif /* FM_NO_DISPATCH_RAM_ECC */
-+
-+#ifdef FM_QMI_NO_ECC_EXCEPTIONS
-+    if (p_Fm->p_FmStateStruct->revInfo.majorRev == 4)
-+        if (p_Fm->userSetExceptions & (FM_EX_QMI_SINGLE_ECC | FM_EX_QMI_DOUBLE_ECC))
-+            RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("exception e_FM_EX_QMI_SINGLE_ECC/e_FM_EX_QMI_DOUBLE_ECC!"));
-+#endif /* FM_QMI_NO_ECC_EXCEPTIONS */
-+
-+#ifdef FM_QMI_NO_SINGLE_ECC_EXCEPTION
-+    if (p_Fm->p_FmStateStruct->revInfo.majorRev >= 6)
-+        if (p_Fm->userSetExceptions & FM_EX_QMI_SINGLE_ECC)
-+            RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("exception e_FM_EX_QMI_SINGLE_ECC!"));
-+#endif /* FM_QMI_NO_SINGLE_ECC_EXCEPTION */
-+
-+    return E_OK;
-+}
-+
-+
-+static void SendIpcIsr(t_Fm *p_Fm, uint32_t macEvent, uint32_t pendingReg)
-+{
-+    ASSERT_COND(p_Fm->guestId == NCSW_MASTER_ID);
-+
-+    if (p_Fm->intrMng[macEvent].guestId == NCSW_MASTER_ID)
-+        p_Fm->intrMng[macEvent].f_Isr(p_Fm->intrMng[macEvent].h_SrcHandle);
-+
-+    /* If the MAC is running on guest-partition and we have IPC session with it,
-+       we inform him about the event through IPC; otherwise, we ignore the event. */
-+    else if (p_Fm->h_IpcSessions[p_Fm->intrMng[macEvent].guestId])
-+    {
-+        t_Error     err;
-+        t_FmIpcIsr  fmIpcIsr;
-+        t_FmIpcMsg  msg;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        msg.msgId = FM_GUEST_ISR;
-+        fmIpcIsr.pendingReg = pendingReg;
-+        fmIpcIsr.boolErr = FALSE;
-+        memcpy(msg.msgBody, &fmIpcIsr, sizeof(fmIpcIsr));
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[p_Fm->intrMng[macEvent].guestId],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId) + sizeof(fmIpcIsr),
-+                                NULL,
-+                                NULL,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            REPORT_ERROR(MINOR, err, NO_MSG);
-+    }
-+    else
-+        DBG(TRACE, ("FM Guest mode, without IPC - can't call ISR!"));
-+}
-+
-+static void BmiErrEvent(t_Fm *p_Fm)
-+{
-+    uint32_t    event;
-+    struct fman_bmi_regs *bmi_rg = p_Fm->p_FmBmiRegs;
-+
-+
-+    event = fman_get_bmi_err_event(bmi_rg);
-+
-+    if (event & BMI_ERR_INTR_EN_STORAGE_PROFILE_ECC)
-+        p_Fm->f_Exception(p_Fm->h_App,e_FM_EX_BMI_STORAGE_PROFILE_ECC);
-+    if (event & BMI_ERR_INTR_EN_LIST_RAM_ECC)
-+        p_Fm->f_Exception(p_Fm->h_App,e_FM_EX_BMI_LIST_RAM_ECC);
-+    if (event & BMI_ERR_INTR_EN_STATISTICS_RAM_ECC)
-+        p_Fm->f_Exception(p_Fm->h_App,e_FM_EX_BMI_STATISTICS_RAM_ECC);
-+    if (event & BMI_ERR_INTR_EN_DISPATCH_RAM_ECC)
-+        p_Fm->f_Exception(p_Fm->h_App,e_FM_EX_BMI_DISPATCH_RAM_ECC);
-+}
-+
-+static void    QmiErrEvent(t_Fm *p_Fm)
-+{
-+    uint32_t    event;
-+    struct fman_qmi_regs *qmi_rg = p_Fm->p_FmQmiRegs;
-+
-+    event = fman_get_qmi_err_event(qmi_rg);
-+
-+    if (event & QMI_ERR_INTR_EN_DOUBLE_ECC)
-+        p_Fm->f_Exception(p_Fm->h_App,e_FM_EX_QMI_DOUBLE_ECC);
-+    if (event & QMI_ERR_INTR_EN_DEQ_FROM_DEF)
-+        p_Fm->f_Exception(p_Fm->h_App,e_FM_EX_QMI_DEQ_FROM_UNKNOWN_PORTID);
-+}
-+
-+static void    DmaErrEvent(t_Fm *p_Fm)
-+{
-+    uint32_t            status, com_id;
-+    uint8_t             tnum;
-+    uint8_t             hardwarePortId;
-+    uint8_t             relativePortId;
-+    uint16_t            liodn;
-+    struct fman_dma_regs *dma_rg = p_Fm->p_FmDmaRegs;
-+
-+    status = fman_get_dma_err_event(dma_rg);
-+
-+    if (status & DMA_STATUS_BUS_ERR)
-+    {
-+        com_id = fman_get_dma_com_id(dma_rg);
-+        hardwarePortId = (uint8_t)(((com_id & DMA_TRANSFER_PORTID_MASK) >> DMA_TRANSFER_PORTID_SHIFT));
-+        ASSERT_COND(IN_RANGE(1, hardwarePortId, 63));
-+        HW_PORT_ID_TO_SW_PORT_ID(relativePortId, hardwarePortId);
-+        tnum = (uint8_t)((com_id & DMA_TRANSFER_TNUM_MASK) >> DMA_TRANSFER_TNUM_SHIFT);
-+        liodn = (uint16_t)(com_id & DMA_TRANSFER_LIODN_MASK);
-+        ASSERT_COND(p_Fm->p_FmStateStruct->portsTypes[hardwarePortId] != e_FM_PORT_TYPE_DUMMY);
-+        p_Fm->f_BusError(p_Fm->h_App,
-+                         p_Fm->p_FmStateStruct->portsTypes[hardwarePortId],
-+                         relativePortId,
-+                         fman_get_dma_addr(dma_rg),
-+                         tnum,
-+                         liodn);
-+    }
-+        if (status & DMA_STATUS_FM_SPDAT_ECC)
-+            p_Fm->f_Exception(p_Fm->h_App, e_FM_EX_DMA_SINGLE_PORT_ECC);
-+        if (status & DMA_STATUS_READ_ECC)
-+            p_Fm->f_Exception(p_Fm->h_App, e_FM_EX_DMA_READ_ECC);
-+        if (status & DMA_STATUS_SYSTEM_WRITE_ECC)
-+            p_Fm->f_Exception(p_Fm->h_App, e_FM_EX_DMA_SYSTEM_WRITE_ECC);
-+        if (status & DMA_STATUS_FM_WRITE_ECC)
-+            p_Fm->f_Exception(p_Fm->h_App, e_FM_EX_DMA_FM_WRITE_ECC);
-+    }
-+
-+static void    FpmErrEvent(t_Fm *p_Fm)
-+{
-+    uint32_t    event;
-+    struct fman_fpm_regs *fpm_rg = p_Fm->p_FmFpmRegs;
-+
-+    event = fman_get_fpm_err_event(fpm_rg);
-+
-+    if ((event  & FPM_EV_MASK_DOUBLE_ECC) && (event & FPM_EV_MASK_DOUBLE_ECC_EN))
-+        p_Fm->f_Exception(p_Fm->h_App,e_FM_EX_FPM_DOUBLE_ECC);
-+    if ((event  & FPM_EV_MASK_STALL) && (event & FPM_EV_MASK_STALL_EN))
-+        p_Fm->f_Exception(p_Fm->h_App,e_FM_EX_FPM_STALL_ON_TASKS);
-+    if ((event  & FPM_EV_MASK_SINGLE_ECC) && (event & FPM_EV_MASK_SINGLE_ECC_EN))
-+        p_Fm->f_Exception(p_Fm->h_App,e_FM_EX_FPM_SINGLE_ECC);
-+}
-+
-+static void    MuramErrIntr(t_Fm *p_Fm)
-+{
-+    uint32_t    event;
-+    struct fman_fpm_regs *fpm_rg = p_Fm->p_FmFpmRegs;
-+
-+    event = fman_get_muram_err_event(fpm_rg);
-+
-+    if (event & FPM_RAM_MURAM_ECC)
-+        p_Fm->f_Exception(p_Fm->h_App, e_FM_EX_MURAM_ECC);
-+}
-+
-+static void IramErrIntr(t_Fm *p_Fm)
-+{
-+    uint32_t    event;
-+    struct fman_fpm_regs *fpm_rg = p_Fm->p_FmFpmRegs;
-+
-+    event = fman_get_iram_err_event(fpm_rg);
-+
-+    if (event & FPM_RAM_IRAM_ECC)
-+        p_Fm->f_Exception(p_Fm->h_App, e_FM_EX_IRAM_ECC);
-+}
-+
-+static void QmiEvent(t_Fm *p_Fm)
-+{
-+    uint32_t    event;
-+    struct fman_qmi_regs *qmi_rg = p_Fm->p_FmQmiRegs;
-+
-+    event = fman_get_qmi_event(qmi_rg);
-+
-+    if (event & QMI_INTR_EN_SINGLE_ECC)
-+        p_Fm->f_Exception(p_Fm->h_App,e_FM_EX_QMI_SINGLE_ECC);
-+}
-+
-+static void UnimplementedIsr(t_Handle h_Arg)
-+{
-+    UNUSED(h_Arg);
-+
-+    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Unimplemented ISR!"));
-+}
-+
-+static void UnimplementedFmanCtrlIsr(t_Handle h_Arg, uint32_t event)
-+{
-+    UNUSED(h_Arg); UNUSED(event);
-+
-+    REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Unimplemented FmCtl ISR!"));
-+}
-+
-+static void EnableTimeStamp(t_Fm *p_Fm)
-+{
-+    struct fman_fpm_regs *fpm_rg = p_Fm->p_FmFpmRegs;
-+
-+    ASSERT_COND(p_Fm->p_FmStateStruct);
-+    ASSERT_COND(p_Fm->p_FmStateStruct->count1MicroBit);
-+
-+    fman_enable_time_stamp(fpm_rg, p_Fm->p_FmStateStruct->count1MicroBit, p_Fm->p_FmStateStruct->fmClkFreq);
-+
-+    p_Fm->p_FmStateStruct->enabledTimeStamp = TRUE;
-+}
-+
-+static t_Error ClearIRam(t_Fm *p_Fm)
-+{
-+    t_FMIramRegs    *p_Iram;
-+    int             i;
-+    int             iram_size;
-+
-+    ASSERT_COND(p_Fm);
-+    p_Iram = (t_FMIramRegs *)UINT_TO_PTR(p_Fm->baseAddr + FM_MM_IMEM);
-+    iram_size = FM_IRAM_SIZE(p_Fm->p_FmStateStruct->revInfo.majorRev,p_Fm->p_FmStateStruct->revInfo.minorRev);
-+
-+    /* Enable the auto-increment */
-+    WRITE_UINT32(p_Iram->iadd, IRAM_IADD_AIE);
-+    while (GET_UINT32(p_Iram->iadd) != IRAM_IADD_AIE) ;
-+
-+    for (i=0; i < (iram_size/4); i++)
-+        WRITE_UINT32(p_Iram->idata, 0xffffffff);
-+
-+    WRITE_UINT32(p_Iram->iadd, iram_size - 4);
-+    CORE_MemoryBarrier();
-+    while (GET_UINT32(p_Iram->idata) != 0xffffffff) ;
-+
-+    return E_OK;
-+}
-+
-+static t_Error LoadFmanCtrlCode(t_Fm *p_Fm)
-+{
-+    t_FMIramRegs    *p_Iram;
-+    int             i;
-+    uint32_t        tmp;
-+    uint8_t         compTo16;
-+
-+    ASSERT_COND(p_Fm);
-+    p_Iram = (t_FMIramRegs *)UINT_TO_PTR(p_Fm->baseAddr + FM_MM_IMEM);
-+
-+    /* Enable the auto-increment */
-+    WRITE_UINT32(p_Iram->iadd, IRAM_IADD_AIE);
-+    while (GET_UINT32(p_Iram->iadd) != IRAM_IADD_AIE) ;
-+
-+    for (i=0; i < (p_Fm->firmware.size / 4); i++)
-+        WRITE_UINT32(p_Iram->idata, p_Fm->firmware.p_Code[i]);
-+
-+    compTo16 = (uint8_t)(p_Fm->firmware.size % 16);
-+    if (compTo16)
-+        for (i=0; i < ((16-compTo16) / 4); i++)
-+            WRITE_UINT32(p_Iram->idata, 0xffffffff);
-+
-+    WRITE_UINT32(p_Iram->iadd,p_Fm->firmware.size-4);
-+    while (GET_UINT32(p_Iram->iadd) != (p_Fm->firmware.size-4)) ;
-+
-+    /* verify that writing has completed */
-+    while (GET_UINT32(p_Iram->idata) != p_Fm->firmware.p_Code[(p_Fm->firmware.size / 4)-1]) ;
-+
-+    if (p_Fm->fwVerify)
-+    {
-+        WRITE_UINT32(p_Iram->iadd, IRAM_IADD_AIE);
-+        while (GET_UINT32(p_Iram->iadd) != IRAM_IADD_AIE) ;
-+        for (i=0; i < (p_Fm->firmware.size / 4); i++)
-+        {
-+            tmp = GET_UINT32(p_Iram->idata);
-+            if (tmp != p_Fm->firmware.p_Code[i])
-+                RETURN_ERROR(MAJOR, E_WRITE_FAILED,
-+                             ("UCode write error : write 0x%x, read 0x%x",
-+                              p_Fm->firmware.p_Code[i],tmp));
-+        }
-+        WRITE_UINT32(p_Iram->iadd, 0x0);
-+    }
-+
-+    /* Enable patch from IRAM */
-+    WRITE_UINT32(p_Iram->iready, IRAM_READY);
-+    XX_UDelay(1000);
-+
-+    DBG(INFO, ("FMan-Controller code (ver %d.%d.%d) loaded to IRAM.",
-+               ((uint16_t *)p_Fm->firmware.p_Code)[2],
-+               ((uint8_t *)p_Fm->firmware.p_Code)[6],
-+               ((uint8_t *)p_Fm->firmware.p_Code)[7]));
-+
-+    return E_OK;
-+}
-+
-+#ifdef FM_UCODE_NOT_RESET_ERRATA_BUGZILLA6173
-+static t_Error FwNotResetErratumBugzilla6173WA(t_Fm *p_Fm)
-+{
-+    t_FMIramRegs    *p_Iram = (t_FMIramRegs *)UINT_TO_PTR(p_Fm->baseAddr + FM_MM_IMEM);
-+    uint32_t        tmpReg;
-+    uint32_t        savedSpliodn[63];
-+
-+    /* write to IRAM first location the debug instruction */
-+    WRITE_UINT32(p_Iram->iadd, 0);
-+    while (GET_UINT32(p_Iram->iadd) != 0) ;
-+    WRITE_UINT32(p_Iram->idata, FM_FW_DEBUG_INSTRUCTION);
-+
-+    WRITE_UINT32(p_Iram->iadd, 0);
-+    while (GET_UINT32(p_Iram->iadd) != 0) ;
-+    while (GET_UINT32(p_Iram->idata) != FM_FW_DEBUG_INSTRUCTION) ;
-+
-+    /* Enable patch from IRAM */
-+    WRITE_UINT32(p_Iram->iready, IRAM_READY);
-+    CORE_MemoryBarrier();
-+    XX_UDelay(100);
-+    IO2MemCpy32((uint8_t *)savedSpliodn,
-+                (uint8_t *)p_Fm->p_FmBmiRegs->fmbm_spliodn,
-+                63*sizeof(uint32_t));
-+
-+    /* reset FMAN */
-+    WRITE_UINT32(p_Fm->p_FmFpmRegs->fm_rstc, FPM_RSTC_FM_RESET);
-+    CORE_MemoryBarrier();
-+    XX_UDelay(100);
-+
-+    /* verify breakpoint debug status register */
-+    tmpReg = GET_UINT32(*(uint32_t *)UINT_TO_PTR(p_Fm->baseAddr + FM_DEBUG_STATUS_REGISTER_OFFSET));
-+    if (!tmpReg)
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Invalid debug status register value is '0'"));
-+
-+    /*************************************/
-+    /* Load FMan-Controller code to IRAM */
-+    /*************************************/
-+    ClearIRam(p_Fm);
-+    if (p_Fm->firmware.p_Code &&
-+        (LoadFmanCtrlCode(p_Fm) != E_OK))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+    XX_UDelay(100);
-+
-+    /* reset FMAN again to start the microcode */
-+    WRITE_UINT32(p_Fm->p_FmFpmRegs->fm_rstc, FPM_RSTC_FM_RESET);
-+    CORE_MemoryBarrier();
-+    XX_UDelay(100);
-+    Mem2IOCpy32((uint8_t *)p_Fm->p_FmBmiRegs->fmbm_spliodn,
-+                (uint8_t *)savedSpliodn,
-+                63*sizeof(uint32_t));
-+
-+    if (fman_is_qmi_halt_not_busy_state(p_Fm->p_FmQmiRegs))
-+    {
-+        fman_resume(p_Fm->p_FmFpmRegs);
-+        CORE_MemoryBarrier();
-+        XX_UDelay(100);
-+    }
-+
-+    return E_OK;
-+}
-+#endif /* FM_UCODE_NOT_RESET_ERRATA_BUGZILLA6173 */
-+
-+static void GuestErrorIsr(t_Fm *p_Fm, uint32_t pending)
-+{
-+#define FM_G_CALL_1G_MAC_ERR_ISR(_id)   \
-+do {                                    \
-+    p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_ERR_1G_MAC0+_id)].f_Isr(p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_ERR_1G_MAC0+_id)].h_SrcHandle);\
-+} while (0)
-+#define FM_G_CALL_10G_MAC_ERR_ISR(_id)  \
-+do {                                    \
-+    p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_ERR_10G_MAC0+_id)].f_Isr(p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_ERR_10G_MAC0+_id)].h_SrcHandle);\
-+} while (0)
-+
-+    /* error interrupts */
-+    if (pending & ERR_INTR_EN_1G_MAC0)
-+        FM_G_CALL_1G_MAC_ERR_ISR(0);
-+    if (pending & ERR_INTR_EN_1G_MAC1)
-+        FM_G_CALL_1G_MAC_ERR_ISR(1);
-+    if (pending & ERR_INTR_EN_1G_MAC2)
-+        FM_G_CALL_1G_MAC_ERR_ISR(2);
-+    if (pending & ERR_INTR_EN_1G_MAC3)
-+        FM_G_CALL_1G_MAC_ERR_ISR(3);
-+    if (pending & ERR_INTR_EN_1G_MAC4)
-+        FM_G_CALL_1G_MAC_ERR_ISR(4);
-+    if (pending & ERR_INTR_EN_1G_MAC5)
-+        FM_G_CALL_1G_MAC_ERR_ISR(5);
-+    if (pending & ERR_INTR_EN_1G_MAC6)
-+        FM_G_CALL_1G_MAC_ERR_ISR(6);
-+    if (pending & ERR_INTR_EN_1G_MAC7)
-+        FM_G_CALL_1G_MAC_ERR_ISR(7);
-+    if (pending & ERR_INTR_EN_10G_MAC0)
-+        FM_G_CALL_10G_MAC_ERR_ISR(0);
-+    if (pending & ERR_INTR_EN_10G_MAC1)
-+        FM_G_CALL_10G_MAC_ERR_ISR(1);
-+}
-+
-+static void GuestEventIsr(t_Fm *p_Fm, uint32_t pending)
-+{
-+#define FM_G_CALL_1G_MAC_ISR(_id)   \
-+do {                                    \
-+    p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_1G_MAC0+_id)].f_Isr(p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_1G_MAC0+_id)].h_SrcHandle);\
-+} while (0)
-+#define FM_G_CALL_10G_MAC_ISR(_id)   \
-+do {                                    \
-+    p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_10G_MAC0+_id)].f_Isr(p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_10G_MAC0+_id)].h_SrcHandle);\
-+} while (0)
-+
-+    if (pending & INTR_EN_1G_MAC0)
-+        FM_G_CALL_1G_MAC_ISR(0);
-+    if (pending & INTR_EN_1G_MAC1)
-+        FM_G_CALL_1G_MAC_ISR(1);
-+    if (pending & INTR_EN_1G_MAC2)
-+        FM_G_CALL_1G_MAC_ISR(2);
-+    if (pending & INTR_EN_1G_MAC3)
-+        FM_G_CALL_1G_MAC_ISR(3);
-+    if (pending & INTR_EN_1G_MAC4)
-+        FM_G_CALL_1G_MAC_ISR(4);
-+    if (pending & INTR_EN_1G_MAC5)
-+        FM_G_CALL_1G_MAC_ISR(5);
-+    if (pending & INTR_EN_1G_MAC6)
-+        FM_G_CALL_1G_MAC_ISR(6);
-+    if (pending & INTR_EN_1G_MAC7)
-+        FM_G_CALL_1G_MAC_ISR(7);
-+    if (pending & INTR_EN_10G_MAC0)
-+        FM_G_CALL_10G_MAC_ISR(0);
-+    if (pending & INTR_EN_10G_MAC1)
-+        FM_G_CALL_10G_MAC_ISR(1);
-+    if (pending & INTR_EN_TMR)
-+        p_Fm->intrMng[e_FM_EV_TMR].f_Isr(p_Fm->intrMng[e_FM_EV_TMR].h_SrcHandle);
-+}
-+
-+#if (DPAA_VERSION >= 11)
-+static t_Error SetVSPWindow(t_Handle  h_Fm,
-+                            uint8_t   hardwarePortId,
-+                            uint8_t   baseStorageProfile,
-+                            uint8_t   log2NumOfProfiles)
-+{
-+    t_Fm                    *p_Fm = (t_Fm *)h_Fm;
-+
-+    ASSERT_COND(h_Fm);
-+    ASSERT_COND(IN_RANGE(1, hardwarePortId, 63));
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        !p_Fm->p_FmBmiRegs &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_FmIpcVspSetPortWindow fmIpcVspSetPortWindow;
-+        t_FmIpcMsg              msg;
-+        t_Error                 err = E_OK;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&fmIpcVspSetPortWindow, 0, sizeof(t_FmIpcVspSetPortWindow));
-+        fmIpcVspSetPortWindow.hardwarePortId      = hardwarePortId;
-+        fmIpcVspSetPortWindow.baseStorageProfile  = baseStorageProfile;
-+        fmIpcVspSetPortWindow.log2NumOfProfiles   = log2NumOfProfiles;
-+        msg.msgId                                 = FM_VSP_SET_PORT_WINDOW;
-+        memcpy(msg.msgBody, &fmIpcVspSetPortWindow, sizeof(t_FmIpcVspSetPortWindow));
-+
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId),
-+                                NULL,
-+                                NULL,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        return E_OK;
-+    }
-+    else if (!p_Fm->p_FmBmiRegs)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("Either IPC or 'baseAddress' is required!"));
-+
-+    fman_set_vsp_window(p_Fm->p_FmBmiRegs,
-+                        hardwarePortId,
-+                        baseStorageProfile,
-+                        log2NumOfProfiles);
-+
-+    return E_OK;
-+}
-+
-+static uint8_t AllocVSPsForPartition(t_Handle  h_Fm, uint8_t base, uint8_t numOfProfiles, uint8_t guestId)
-+{
-+    t_Fm        *p_Fm = (t_Fm *)h_Fm;
-+    uint8_t     profilesFound = 0;
-+    int         i = 0;
-+    uint32_t    intFlags;
-+
-+    if (!numOfProfiles)
-+        return E_OK;
-+
-+    if ((numOfProfiles > FM_VSP_MAX_NUM_OF_ENTRIES) ||
-+        (base + numOfProfiles > FM_VSP_MAX_NUM_OF_ENTRIES))
-+        return (uint8_t)ILLEGAL_BASE;
-+
-+    if (p_Fm->h_IpcSessions[0])
-+    {
-+        t_FmIpcResourceAllocParams  ipcAllocParams;
-+        t_FmIpcMsg                  msg;
-+        t_FmIpcReply                reply;
-+        t_Error                     err;
-+        uint32_t                    replyLength;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        memset(&ipcAllocParams, 0, sizeof(t_FmIpcResourceAllocParams));
-+        ipcAllocParams.guestId         = p_Fm->guestId;
-+        ipcAllocParams.num             = p_Fm->partNumOfVSPs;
-+        ipcAllocParams.base            = p_Fm->partVSPBase;
-+        msg.msgId                              = FM_VSP_ALLOC;
-+        memcpy(msg.msgBody, &ipcAllocParams, sizeof(t_FmIpcResourceAllocParams));
-+        replyLength = sizeof(uint32_t) + sizeof(uint8_t);
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId) + sizeof(t_FmIpcResourceAllocParams),
-+                                (uint8_t*)&reply,
-+                                &replyLength,
-+                                NULL,
-+                                NULL);
-+        if ((err != E_OK) ||
-+            (replyLength != (sizeof(uint32_t) + sizeof(uint8_t))))
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        else
-+            memcpy((uint8_t*)&p_Fm->partVSPBase, reply.replyBody, sizeof(uint8_t));
-+        if (p_Fm->partVSPBase == (uint8_t)(ILLEGAL_BASE))
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+    if (p_Fm->guestId != NCSW_MASTER_ID)
-+    {
-+        DBG(WARNING, ("FM Guest mode, without IPC - can't validate VSP range!"));
-+        return (uint8_t)ILLEGAL_BASE;
-+    }
-+
-+    intFlags = XX_LockIntrSpinlock(p_Fm->h_Spinlock);
-+    for (i = base; i < base + numOfProfiles; i++)
-+        if (p_Fm->p_FmSp->profiles[i].profilesMng.ownerId == (uint8_t)ILLEGAL_BASE)
-+            profilesFound++;
-+        else
-+            break;
-+
-+    if (profilesFound == numOfProfiles)
-+        for (i = base; i<base + numOfProfiles; i++)
-+            p_Fm->p_FmSp->profiles[i].profilesMng.ownerId = guestId;
-+    else
-+    {
-+        XX_UnlockIntrSpinlock(p_Fm->h_Spinlock, intFlags);
-+        return (uint8_t)ILLEGAL_BASE;
-+    }
-+    XX_UnlockIntrSpinlock(p_Fm->h_Spinlock, intFlags);
-+
-+    return base;
-+}
-+
-+static void FreeVSPsForPartition(t_Handle  h_Fm, uint8_t base, uint8_t numOfProfiles, uint8_t guestId)
-+{
-+    t_Fm    *p_Fm = (t_Fm *)h_Fm;
-+    int     i = 0;
-+
-+    ASSERT_COND(p_Fm);
-+
-+    if (p_Fm->h_IpcSessions[0])
-+    {
-+        t_FmIpcResourceAllocParams  ipcAllocParams;
-+        t_FmIpcMsg                  msg;
-+        t_FmIpcReply                reply;
-+        uint32_t                    replyLength;
-+        t_Error                     err;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        memset(&ipcAllocParams, 0, sizeof(t_FmIpcResourceAllocParams));
-+        ipcAllocParams.guestId         = p_Fm->guestId;
-+        ipcAllocParams.num             = p_Fm->partNumOfVSPs;
-+        ipcAllocParams.base            = p_Fm->partVSPBase;
-+        msg.msgId                              = FM_VSP_FREE;
-+        memcpy(msg.msgBody, &ipcAllocParams, sizeof(t_FmIpcResourceAllocParams));
-+        replyLength = sizeof(uint32_t) + sizeof(uint8_t);
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId) + sizeof(t_FmIpcResourceAllocParams),
-+                                (uint8_t*)&reply,
-+                                &replyLength,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            REPORT_ERROR(MAJOR, err, NO_MSG);
-+        return;
-+    }
-+    if (p_Fm->guestId != NCSW_MASTER_ID)
-+    {
-+        DBG(WARNING, ("FM Guest mode, without IPC - can't validate VSP range!"));
-+        return;
-+    }
-+
-+    ASSERT_COND(p_Fm->p_FmSp);
-+
-+    for (i=base; i<numOfProfiles; i++)
-+    {
-+        if (p_Fm->p_FmSp->profiles[i].profilesMng.ownerId == guestId)
-+           p_Fm->p_FmSp->profiles[i].profilesMng.ownerId = (uint8_t)ILLEGAL_BASE;
-+        else
-+            DBG(WARNING, ("Request for freeing storage profile window which wasn't allocated to this partition"));
-+    }
-+}
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+static t_Error FmGuestHandleIpcMsgCB(t_Handle  h_Fm,
-+                                     uint8_t   *p_Msg,
-+                                     uint32_t  msgLength,
-+                                     uint8_t   *p_Reply,
-+                                     uint32_t  *p_ReplyLength)
-+{
-+    t_Fm            *p_Fm       = (t_Fm*)h_Fm;
-+    t_FmIpcMsg      *p_IpcMsg   = (t_FmIpcMsg*)p_Msg;
-+
-+    UNUSED(p_Reply);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((msgLength > sizeof(uint32_t)), E_INVALID_VALUE);
-+
-+#ifdef DISABLE_SANITY_CHECKS
-+    UNUSED(msgLength);
-+#endif /* DISABLE_SANITY_CHECKS */
-+
-+    ASSERT_COND(p_Msg);
-+
-+    *p_ReplyLength = 0;
-+
-+    switch (p_IpcMsg->msgId)
-+    {
-+        case (FM_GUEST_ISR):
-+        {
-+            t_FmIpcIsr ipcIsr;
-+
-+            memcpy((uint8_t*)&ipcIsr, p_IpcMsg->msgBody, sizeof(t_FmIpcIsr));
-+            if (ipcIsr.boolErr)
-+                GuestErrorIsr(p_Fm, ipcIsr.pendingReg);
-+            else
-+                GuestEventIsr(p_Fm, ipcIsr.pendingReg);
-+            break;
-+        }
-+        default:
-+            *p_ReplyLength = 0;
-+            RETURN_ERROR(MINOR, E_INVALID_SELECTION, ("command not found!!!"));
-+    }
-+    return E_OK;
-+}
-+
-+static t_Error FmHandleIpcMsgCB(t_Handle  h_Fm,
-+                                uint8_t   *p_Msg,
-+                                uint32_t  msgLength,
-+                                uint8_t   *p_Reply,
-+                                uint32_t  *p_ReplyLength)
-+{
-+    t_Error         err;
-+    t_Fm            *p_Fm       = (t_Fm*)h_Fm;
-+    t_FmIpcMsg      *p_IpcMsg   = (t_FmIpcMsg*)p_Msg;
-+    t_FmIpcReply    *p_IpcReply = (t_FmIpcReply*)p_Reply;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((msgLength >= sizeof(uint32_t)), E_INVALID_VALUE);
-+
-+#ifdef DISABLE_SANITY_CHECKS
-+    UNUSED(msgLength);
-+#endif /* DISABLE_SANITY_CHECKS */
-+
-+    ASSERT_COND(p_IpcMsg);
-+
-+    memset(p_IpcReply, 0, (sizeof(uint8_t) * FM_IPC_MAX_REPLY_SIZE));
-+    *p_ReplyLength = 0;
-+
-+    switch (p_IpcMsg->msgId)
-+    {
-+        case (FM_GET_SET_PORT_PARAMS):
-+        {
-+            t_FmIpcPortInInitParams         ipcInitParams;
-+            t_FmInterModulePortInitParams   initParams;
-+            t_FmIpcPortOutInitParams        ipcOutInitParams;
-+
-+            memcpy((uint8_t*)&ipcInitParams, p_IpcMsg->msgBody, sizeof(t_FmIpcPortInInitParams));
-+            initParams.hardwarePortId = ipcInitParams.hardwarePortId;
-+            initParams.portType = (e_FmPortType)ipcInitParams.enumPortType;
-+            initParams.independentMode = (bool)(ipcInitParams.boolIndependentMode);
-+            initParams.liodnOffset = ipcInitParams.liodnOffset;
-+            initParams.numOfTasks = ipcInitParams.numOfTasks;
-+            initParams.numOfExtraTasks = ipcInitParams.numOfExtraTasks;
-+            initParams.numOfOpenDmas = ipcInitParams.numOfOpenDmas;
-+            initParams.numOfExtraOpenDmas = ipcInitParams.numOfExtraOpenDmas;
-+            initParams.sizeOfFifo = ipcInitParams.sizeOfFifo;
-+            initParams.extraSizeOfFifo = ipcInitParams.extraSizeOfFifo;
-+            initParams.deqPipelineDepth = ipcInitParams.deqPipelineDepth;
-+            initParams.maxFrameLength = ipcInitParams.maxFrameLength;
-+            initParams.liodnBase = ipcInitParams.liodnBase;
-+
-+            p_IpcReply->error = (uint32_t)FmGetSetPortParams(h_Fm, &initParams);
-+
-+            ipcOutInitParams.ipcPhysAddr.high = initParams.fmMuramPhysBaseAddr.high;
-+            ipcOutInitParams.ipcPhysAddr.low = initParams.fmMuramPhysBaseAddr.low;
-+            ipcOutInitParams.sizeOfFifo = initParams.sizeOfFifo;
-+            ipcOutInitParams.extraSizeOfFifo = initParams.extraSizeOfFifo;
-+            ipcOutInitParams.numOfTasks = initParams.numOfTasks;
-+            ipcOutInitParams.numOfExtraTasks = initParams.numOfExtraTasks;
-+            ipcOutInitParams.numOfOpenDmas = initParams.numOfOpenDmas;
-+            ipcOutInitParams.numOfExtraOpenDmas = initParams.numOfExtraOpenDmas;
-+            memcpy(p_IpcReply->replyBody, (uint8_t*)&ipcOutInitParams, sizeof(ipcOutInitParams));
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(t_FmIpcPortOutInitParams);
-+            break;
-+        }
-+        case (FM_SET_SIZE_OF_FIFO):
-+        {
-+            t_FmIpcPortRsrcParams   ipcPortRsrcParams;
-+
-+            memcpy((uint8_t*)&ipcPortRsrcParams, p_IpcMsg->msgBody, sizeof(t_FmIpcPortRsrcParams));
-+            p_IpcReply->error = (uint32_t)FmSetSizeOfFifo(h_Fm,
-+                                                          ipcPortRsrcParams.hardwarePortId,
-+                                                          &ipcPortRsrcParams.val,
-+                                                          &ipcPortRsrcParams.extra,
-+                                                          (bool)ipcPortRsrcParams.boolInitialConfig);
-+            *p_ReplyLength = sizeof(uint32_t);
-+            break;
-+        }
-+        case (FM_SET_NUM_OF_TASKS):
-+        {
-+            t_FmIpcPortRsrcParams   ipcPortRsrcParams;
-+
-+            memcpy((uint8_t*)&ipcPortRsrcParams, p_IpcMsg->msgBody, sizeof(t_FmIpcPortRsrcParams));
-+            p_IpcReply->error = (uint32_t)FmSetNumOfTasks(h_Fm, ipcPortRsrcParams.hardwarePortId,
-+                                                          (uint8_t*)&ipcPortRsrcParams.val,
-+                                                          (uint8_t*)&ipcPortRsrcParams.extra,
-+                                                          (bool)ipcPortRsrcParams.boolInitialConfig);
-+            *p_ReplyLength = sizeof(uint32_t);
-+            break;
-+        }
-+        case (FM_SET_NUM_OF_OPEN_DMAS):
-+        {
-+            t_FmIpcPortRsrcParams   ipcPortRsrcParams;
-+
-+            memcpy((uint8_t*)&ipcPortRsrcParams, p_IpcMsg->msgBody, sizeof(t_FmIpcPortRsrcParams));
-+            p_IpcReply->error = (uint32_t)FmSetNumOfOpenDmas(h_Fm, ipcPortRsrcParams.hardwarePortId,
-+                                                               (uint8_t*)&ipcPortRsrcParams.val,
-+                                                               (uint8_t*)&ipcPortRsrcParams.extra,
-+                                                               (bool)ipcPortRsrcParams.boolInitialConfig);
-+            *p_ReplyLength = sizeof(uint32_t);
-+            break;
-+        }
-+        case (FM_RESUME_STALLED_PORT):
-+            *p_ReplyLength = sizeof(uint32_t);
-+            p_IpcReply->error = (uint32_t)FmResumeStalledPort(h_Fm, p_IpcMsg->msgBody[0]);
-+            break;
-+        case (FM_MASTER_IS_ALIVE):
-+        {
-+            uint8_t guestId = p_IpcMsg->msgBody[0];
-+            /* build the FM master partition IPC address */
-+            memset(p_Fm->fmIpcHandlerModuleName[guestId], 0, (sizeof(char)) * MODULE_NAME_SIZE);
-+            if (Sprint (p_Fm->fmIpcHandlerModuleName[guestId], "FM_%d_%d",p_Fm->p_FmStateStruct->fmId, guestId) != (guestId<10 ? 6:7))
-+                RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Sprint failed"));
-+            p_Fm->h_IpcSessions[guestId] = XX_IpcInitSession(p_Fm->fmIpcHandlerModuleName[guestId], p_Fm->fmModuleName);
-+            if (p_Fm->h_IpcSessions[guestId] == NULL)
-+                RETURN_ERROR(MAJOR, E_NOT_AVAILABLE, ("FM Master IPC session for guest %d", guestId));
-+            *(uint8_t*)(p_IpcReply->replyBody) = 1;
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(uint8_t);
-+            break;
-+        }
-+        case (FM_IS_PORT_STALLED):
-+        {
-+            bool tmp;
-+
-+            p_IpcReply->error = (uint32_t)FmIsPortStalled(h_Fm, p_IpcMsg->msgBody[0], &tmp);
-+            *(uint8_t*)(p_IpcReply->replyBody) = (uint8_t)tmp;
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(uint8_t);
-+            break;
-+        }
-+        case (FM_RESET_MAC):
-+        {
-+            t_FmIpcMacParams    ipcMacParams;
-+
-+            memcpy((uint8_t*)&ipcMacParams, p_IpcMsg->msgBody, sizeof(t_FmIpcMacParams));
-+            p_IpcReply->error = (uint32_t)FmResetMac(p_Fm,
-+                                                     (e_FmMacType)(ipcMacParams.enumType),
-+                                                     ipcMacParams.id);
-+            *p_ReplyLength = sizeof(uint32_t);
-+            break;
-+        }
-+        case (FM_SET_MAC_MAX_FRAME):
-+        {
-+            t_FmIpcMacMaxFrameParams    ipcMacMaxFrameParams;
-+
-+            memcpy((uint8_t*)&ipcMacMaxFrameParams, p_IpcMsg->msgBody, sizeof(t_FmIpcMacMaxFrameParams));
-+            err = FmSetMacMaxFrame(p_Fm,
-+                                  (e_FmMacType)(ipcMacMaxFrameParams.macParams.enumType),
-+                                  ipcMacMaxFrameParams.macParams.id,
-+                                  ipcMacMaxFrameParams.maxFrameLength);
-+            if (err != E_OK)
-+                REPORT_ERROR(MINOR, err, NO_MSG);
-+            break;
-+        }
-+#if (DPAA_VERSION >= 11)
-+        case (FM_VSP_ALLOC) :
-+        {
-+            t_FmIpcResourceAllocParams  ipcAllocParams;
-+            uint8_t                     vspBase;
-+            memcpy(&ipcAllocParams, p_IpcMsg->msgBody, sizeof(t_FmIpcResourceAllocParams));
-+            vspBase =  AllocVSPsForPartition(h_Fm, (uint8_t)ipcAllocParams.base, (uint8_t)ipcAllocParams.num, ipcAllocParams.guestId);
-+            memcpy(p_IpcReply->replyBody, (uint8_t*)&vspBase, sizeof(uint8_t));
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(uint8_t);
-+            break;
-+        }
-+        case (FM_VSP_FREE) :
-+        {
-+            t_FmIpcResourceAllocParams   ipcAllocParams;
-+            memcpy(&ipcAllocParams, p_IpcMsg->msgBody, sizeof(t_FmIpcResourceAllocParams));
-+            FreeVSPsForPartition(h_Fm, (uint8_t)ipcAllocParams.base, (uint8_t)ipcAllocParams.num, ipcAllocParams.guestId);
-+            break;
-+        }
-+        case (FM_VSP_SET_PORT_WINDOW) :
-+        {
-+            t_FmIpcVspSetPortWindow   ipcVspSetPortWindow;
-+            memcpy(&ipcVspSetPortWindow, p_IpcMsg->msgBody, sizeof(t_FmIpcVspSetPortWindow));
-+            err = SetVSPWindow(h_Fm,
-+                                            ipcVspSetPortWindow.hardwarePortId,
-+                                            ipcVspSetPortWindow.baseStorageProfile,
-+                                            ipcVspSetPortWindow.log2NumOfProfiles);
-+            return err;
-+        }
-+        case (FM_SET_CONG_GRP_PFC_PRIO) :
-+        {
-+            t_FmIpcSetCongestionGroupPfcPriority    fmIpcSetCongestionGroupPfcPriority;
-+            memcpy(&fmIpcSetCongestionGroupPfcPriority, p_IpcMsg->msgBody, sizeof(t_FmIpcSetCongestionGroupPfcPriority));
-+            err = FmSetCongestionGroupPFCpriority(h_Fm,
-+                                                  fmIpcSetCongestionGroupPfcPriority.congestionGroupId,
-+                                                  fmIpcSetCongestionGroupPfcPriority.priorityBitMap);
-+            return err;
-+        }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+        case (FM_FREE_PORT):
-+        {
-+            t_FmInterModulePortFreeParams   portParams;
-+            t_FmIpcPortFreeParams           ipcPortParams;
-+
-+            memcpy((uint8_t*)&ipcPortParams, p_IpcMsg->msgBody, sizeof(t_FmIpcPortFreeParams));
-+            portParams.hardwarePortId = ipcPortParams.hardwarePortId;
-+            portParams.portType = (e_FmPortType)(ipcPortParams.enumPortType);
-+            portParams.deqPipelineDepth = ipcPortParams.deqPipelineDepth;
-+            FmFreePortParams(h_Fm, &portParams);
-+            break;
-+        }
-+        case (FM_REGISTER_INTR):
-+        {
-+            t_FmIpcRegisterIntr ipcRegIntr;
-+
-+            memcpy((uint8_t*)&ipcRegIntr, p_IpcMsg->msgBody, sizeof(ipcRegIntr));
-+            p_Fm->intrMng[ipcRegIntr.event].guestId = ipcRegIntr.guestId;
-+            break;
-+        }
-+        case (FM_GET_PARAMS):
-+        {
-+             t_FmIpcParams  ipcParams;
-+
-+            /* Get clock frequency */
-+            ipcParams.fmClkFreq = p_Fm->p_FmStateStruct->fmClkFreq;
-+            ipcParams.fmMacClkFreq = p_Fm->p_FmStateStruct->fmMacClkFreq;
-+
-+            fman_get_revision(p_Fm->p_FmFpmRegs,&ipcParams.majorRev,&ipcParams.minorRev);
-+
-+            memcpy(p_IpcReply->replyBody, (uint8_t*)&ipcParams, sizeof(t_FmIpcParams));
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(t_FmIpcParams);
-+             break;
-+        }
-+        case (FM_GET_FMAN_CTRL_CODE_REV):
-+        {
-+            t_FmCtrlCodeRevisionInfo        fmanCtrlRevInfo;
-+            t_FmIpcFmanCtrlCodeRevisionInfo ipcRevInfo;
-+
-+            p_IpcReply->error = (uint32_t)FM_GetFmanCtrlCodeRevision(h_Fm, &fmanCtrlRevInfo);
-+            ipcRevInfo.packageRev = fmanCtrlRevInfo.packageRev;
-+            ipcRevInfo.majorRev = fmanCtrlRevInfo.majorRev;
-+            ipcRevInfo.minorRev = fmanCtrlRevInfo.minorRev;
-+            memcpy(p_IpcReply->replyBody, (uint8_t*)&ipcRevInfo, sizeof(t_FmIpcFmanCtrlCodeRevisionInfo));
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(t_FmIpcFmanCtrlCodeRevisionInfo);
-+            break;
-+        }
-+
-+        case (FM_DMA_STAT):
-+        {
-+            t_FmDmaStatus       dmaStatus;
-+            t_FmIpcDmaStatus    ipcDmaStatus;
-+
-+            FM_GetDmaStatus(h_Fm, &dmaStatus);
-+            ipcDmaStatus.boolCmqNotEmpty = (uint8_t)dmaStatus.cmqNotEmpty;
-+            ipcDmaStatus.boolBusError = (uint8_t)dmaStatus.busError;
-+            ipcDmaStatus.boolReadBufEccError = (uint8_t)dmaStatus.readBufEccError;
-+            ipcDmaStatus.boolWriteBufEccSysError = (uint8_t)dmaStatus.writeBufEccSysError;
-+            ipcDmaStatus.boolWriteBufEccFmError = (uint8_t)dmaStatus.writeBufEccFmError;
-+            ipcDmaStatus.boolSinglePortEccError = (uint8_t)dmaStatus.singlePortEccError;
-+            memcpy(p_IpcReply->replyBody, (uint8_t*)&ipcDmaStatus, sizeof(t_FmIpcDmaStatus));
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(t_FmIpcDmaStatus);
-+            break;
-+        }
-+        case (FM_ALLOC_FMAN_CTRL_EVENT_REG):
-+            p_IpcReply->error = (uint32_t)FmAllocFmanCtrlEventReg(h_Fm, (uint8_t*)p_IpcReply->replyBody);
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(uint8_t);
-+            break;
-+        case (FM_FREE_FMAN_CTRL_EVENT_REG):
-+            FmFreeFmanCtrlEventReg(h_Fm, p_IpcMsg->msgBody[0]);
-+            break;
-+        case (FM_GET_TIMESTAMP_SCALE):
-+        {
-+            uint32_t    timeStamp = FmGetTimeStampScale(h_Fm);
-+
-+            memcpy(p_IpcReply->replyBody, (uint8_t*)&timeStamp, sizeof(uint32_t));
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(uint32_t);
-+            break;
-+        }
-+        case (FM_GET_COUNTER):
-+        {
-+            e_FmCounters    inCounter;
-+            uint32_t        outCounter;
-+
-+            memcpy((uint8_t*)&inCounter, p_IpcMsg->msgBody, sizeof(uint32_t));
-+            outCounter = FM_GetCounter(h_Fm, inCounter);
-+            memcpy(p_IpcReply->replyBody, (uint8_t*)&outCounter, sizeof(uint32_t));
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(uint32_t);
-+            break;
-+        }
-+        case (FM_SET_FMAN_CTRL_EVENTS_ENABLE):
-+        {
-+            t_FmIpcFmanEvents ipcFmanEvents;
-+
-+            memcpy((uint8_t*)&ipcFmanEvents, p_IpcMsg->msgBody, sizeof(t_FmIpcFmanEvents));
-+            FmSetFmanCtrlIntr(h_Fm,
-+                              ipcFmanEvents.eventRegId,
-+                              ipcFmanEvents.enableEvents);
-+            break;
-+        }
-+        case (FM_GET_FMAN_CTRL_EVENTS_ENABLE):
-+        {
-+            uint32_t    tmp = FmGetFmanCtrlIntr(h_Fm, p_IpcMsg->msgBody[0]);
-+
-+            memcpy(p_IpcReply->replyBody, (uint8_t*)&tmp, sizeof(uint32_t));
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(uint32_t);
-+            break;
-+        }
-+        case (FM_GET_PHYS_MURAM_BASE):
-+        {
-+            t_FmPhysAddr        physAddr;
-+            t_FmIpcPhysAddr     ipcPhysAddr;
-+
-+            FmGetPhysicalMuramBase(h_Fm, &physAddr);
-+            ipcPhysAddr.high    = physAddr.high;
-+            ipcPhysAddr.low     = physAddr.low;
-+            memcpy(p_IpcReply->replyBody, (uint8_t*)&ipcPhysAddr, sizeof(t_FmIpcPhysAddr));
-+            *p_ReplyLength = sizeof(uint32_t) + sizeof(t_FmIpcPhysAddr);
-+            break;
-+        }
-+        case (FM_ENABLE_RAM_ECC):
-+        {
-+            if (((err = FM_EnableRamsEcc(h_Fm)) != E_OK) ||
-+                ((err = FM_SetException(h_Fm, e_FM_EX_IRAM_ECC, TRUE)) != E_OK) ||
-+                ((err = FM_SetException(h_Fm, e_FM_EX_MURAM_ECC, TRUE)) != E_OK))
-+#if (!(defined(DEBUG_ERRORS)) || (DEBUG_ERRORS == 0))
-+                UNUSED(err);
-+#else
-+                REPORT_ERROR(MINOR, err, NO_MSG);
-+#endif /* (!(defined(DEBUG_ERRORS)) || (DEBUG_ERRORS == 0)) */
-+            break;
-+        }
-+        case (FM_DISABLE_RAM_ECC):
-+        {
-+
-+            if (((err = FM_SetException(h_Fm, e_FM_EX_IRAM_ECC, FALSE)) != E_OK) ||
-+                ((err = FM_SetException(h_Fm, e_FM_EX_MURAM_ECC, FALSE)) != E_OK) ||
-+                ((err = FM_DisableRamsEcc(h_Fm)) != E_OK))
-+#if (!(defined(DEBUG_ERRORS)) || (DEBUG_ERRORS == 0))
-+                UNUSED(err);
-+#else
-+                REPORT_ERROR(MINOR, err, NO_MSG);
-+#endif /* (!(defined(DEBUG_ERRORS)) || (DEBUG_ERRORS == 0)) */
-+            break;
-+        }
-+        case (FM_SET_NUM_OF_FMAN_CTRL):
-+        {
-+            t_FmIpcPortNumOfFmanCtrls   ipcPortNumOfFmanCtrls;
-+
-+            memcpy((uint8_t*)&ipcPortNumOfFmanCtrls, p_IpcMsg->msgBody, sizeof(t_FmIpcPortNumOfFmanCtrls));
-+            err = FmSetNumOfRiscsPerPort(h_Fm,
-+                                         ipcPortNumOfFmanCtrls.hardwarePortId,
-+                                         ipcPortNumOfFmanCtrls.numOfFmanCtrls,
-+                                         ipcPortNumOfFmanCtrls.orFmanCtrl);
-+            if (err != E_OK)
-+                REPORT_ERROR(MINOR, err, NO_MSG);
-+            break;
-+        }
-+#ifdef FM_TX_ECC_FRMS_ERRATA_10GMAC_A004
-+        case (FM_10G_TX_ECC_WA):
-+            p_IpcReply->error = (uint32_t)Fm10GTxEccWorkaround(h_Fm, p_IpcMsg->msgBody[0]);
-+            *p_ReplyLength = sizeof(uint32_t);
-+            break;
-+#endif /* FM_TX_ECC_FRMS_ERRATA_10GMAC_A004 */
-+        default:
-+            *p_ReplyLength = 0;
-+            RETURN_ERROR(MINOR, E_INVALID_SELECTION, ("command not found!!!"));
-+    }
-+    return E_OK;
-+}
-+
-+
-+/****************************************/
-+/*       Inter-Module functions         */
-+/****************************************/
-+#ifdef FM_TX_ECC_FRMS_ERRATA_10GMAC_A004
-+t_Error Fm10GTxEccWorkaround(t_Handle h_Fm, uint8_t macId)
-+{
-+    t_Fm            *p_Fm = (t_Fm*)h_Fm;
-+    t_Error         err = E_OK;
-+    t_FmIpcMsg      msg;
-+    t_FmIpcReply    reply;
-+    uint32_t        replyLength;
-+    uint8_t         rxHardwarePortId, txHardwarePortId;
-+    struct fman_fpm_regs *fpm_rg = p_Fm->p_FmFpmRegs;
-+
-+    if (p_Fm->guestId != NCSW_MASTER_ID)
-+    {
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_10G_TX_ECC_WA;
-+        msg.msgBody[0] = macId;
-+        replyLength = sizeof(uint32_t);
-+        if ((err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                     (uint8_t*)&msg,
-+                                     sizeof(msg.msgId)+sizeof(macId),
-+                                     (uint8_t*)&reply,
-+                                     &replyLength,
-+                                     NULL,
-+                                     NULL)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        if (replyLength != sizeof(uint32_t))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+        return (t_Error)(reply.error);
-+    }
-+
-+    SANITY_CHECK_RETURN_ERROR((macId == 0), E_NOT_SUPPORTED);
-+    SANITY_CHECK_RETURN_ERROR(IsFmanCtrlCodeLoaded(p_Fm), E_INVALID_STATE);
-+
-+    rxHardwarePortId = SwPortIdToHwPortId(e_FM_PORT_TYPE_RX_10G,
-+                                    macId,
-+                                    p_Fm->p_FmStateStruct->revInfo.majorRev,
-+                                    p_Fm->p_FmStateStruct->revInfo.minorRev);
-+    txHardwarePortId = SwPortIdToHwPortId(e_FM_PORT_TYPE_TX_10G,
-+                                    macId,
-+                                    p_Fm->p_FmStateStruct->revInfo.majorRev,
-+                                    p_Fm->p_FmStateStruct->revInfo.minorRev);
-+    if ((p_Fm->p_FmStateStruct->portsTypes[rxHardwarePortId] != e_FM_PORT_TYPE_DUMMY) ||
-+        (p_Fm->p_FmStateStruct->portsTypes[txHardwarePortId] != e_FM_PORT_TYPE_DUMMY))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+                     ("MAC should be initialized prior to Rx and Tx ports!"));
-+
-+    return fman_set_erratum_10gmac_a004_wa(fpm_rg);
-+}
-+#endif /* FM_TX_ECC_FRMS_ERRATA_10GMAC_A004 */
-+
-+uint16_t FmGetTnumAgingPeriod(t_Handle h_Fm)
-+{
-+    t_Fm *p_Fm = (t_Fm *)h_Fm;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_Fm, E_INVALID_HANDLE, 0);
-+    SANITY_CHECK_RETURN_VALUE(!p_Fm->p_FmDriverParam, E_INVALID_STATE, 0);
-+
-+    return p_Fm->tnumAgingPeriod;
-+}
-+
-+t_Error FmSetPortPreFetchConfiguration(t_Handle h_Fm,
-+                                       uint8_t  portNum,
-+                                       bool     preFetchConfigured)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Fm->p_FmDriverParam, E_INVALID_STATE);
-+
-+    p_Fm->portsPreFetchConfigured[portNum] = TRUE;
-+    p_Fm->portsPreFetchValue[portNum] = preFetchConfigured;
-+
-+    return E_OK;
-+}
-+
-+t_Error FmGetPortPreFetchConfiguration(t_Handle h_Fm,
-+                                       uint8_t  portNum,
-+                                       bool     *p_PortConfigured,
-+                                       bool     *p_PreFetchConfigured)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Fm->p_FmDriverParam, E_INVALID_STATE);
-+
-+    /* If the prefetch wasn't configured yet (not enable or disabled)
-+       we return the value TRUE as it was already configured */
-+    if (!p_Fm->portsPreFetchConfigured[portNum])
-+    {
-+        *p_PortConfigured = FALSE;
-+        *p_PreFetchConfigured = FALSE;
-+    }
-+    else
-+    {
-+        *p_PortConfigured = TRUE;
-+        *p_PreFetchConfigured = (p_Fm->portsPreFetchConfigured[portNum]);
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Error FmSetCongestionGroupPFCpriority(t_Handle    h_Fm,
-+                                        uint32_t    congestionGroupId,
-+                                        uint8_t     priorityBitMap)
-+{
-+    t_Fm    *p_Fm  = (t_Fm *)h_Fm;
-+    uint32_t regNum;
-+
-+    ASSERT_COND(h_Fm);
-+
-+    if (congestionGroupId > FM_PORT_NUM_OF_CONGESTION_GRPS)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+                     ("Congestion group ID bigger than %d",
-+                      FM_PORT_NUM_OF_CONGESTION_GRPS));
-+
-+    if (p_Fm->guestId == NCSW_MASTER_ID)
-+    {
-+        ASSERT_COND(p_Fm->baseAddr);
-+        regNum = (FM_PORT_NUM_OF_CONGESTION_GRPS - 1 - congestionGroupId) / 4;
-+        fman_set_congestion_group_pfc_priority((uint32_t *)((p_Fm->baseAddr+FM_MM_CGP)),
-+                                               congestionGroupId,
-+                                               priorityBitMap,
-+                                               regNum);
-+    }
-+    else if (p_Fm->h_IpcSessions[0])
-+    {
-+        t_Error                              err;
-+        t_FmIpcMsg                           msg;
-+        t_FmIpcSetCongestionGroupPfcPriority fmIpcSetCongestionGroupPfcPriority;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&fmIpcSetCongestionGroupPfcPriority, 0, sizeof(t_FmIpcSetCongestionGroupPfcPriority));
-+        fmIpcSetCongestionGroupPfcPriority.congestionGroupId = congestionGroupId;
-+        fmIpcSetCongestionGroupPfcPriority.priorityBitMap    = priorityBitMap;
-+
-+        msg.msgId = FM_SET_CONG_GRP_PFC_PRIO;
-+        memcpy(msg.msgBody, &fmIpcSetCongestionGroupPfcPriority, sizeof(t_FmIpcSetCongestionGroupPfcPriority));
-+
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId),
-+                                NULL,
-+                                NULL,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+    else
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("guest without IPC!"));
-+
-+    return E_OK;
-+}
-+
-+uintptr_t FmGetPcdPrsBaseAddr(t_Handle h_Fm)
-+{
-+    t_Fm        *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_Fm, E_INVALID_HANDLE, 0);
-+
-+    if (!p_Fm->baseAddr)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE,
-+                     ("No base-addr; probably Guest with IPC!"));
-+        return 0;
-+    }
-+
-+    return (p_Fm->baseAddr + FM_MM_PRS);
-+}
-+
-+uintptr_t FmGetPcdKgBaseAddr(t_Handle h_Fm)
-+{
-+    t_Fm        *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_Fm, E_INVALID_HANDLE, 0);
-+
-+    if (!p_Fm->baseAddr)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE,
-+                     ("No base-addr; probably Guest with IPC!"));
-+        return 0;
-+    }
-+
-+    return (p_Fm->baseAddr + FM_MM_KG);
-+}
-+
-+uintptr_t FmGetPcdPlcrBaseAddr(t_Handle h_Fm)
-+{
-+    t_Fm        *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_Fm, E_INVALID_HANDLE, 0);
-+
-+    if (!p_Fm->baseAddr)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE,
-+                     ("No base-addr; probably Guest with IPC!"));
-+        return 0;
-+    }
-+
-+    return (p_Fm->baseAddr + FM_MM_PLCR);
-+}
-+
-+#if (DPAA_VERSION >= 11)
-+uintptr_t FmGetVSPBaseAddr(t_Handle h_Fm)
-+{
-+    t_Fm        *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_Fm, E_INVALID_HANDLE, 0);
-+
-+    return p_Fm->vspBaseAddr;
-+}
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+t_Handle FmGetMuramHandle(t_Handle h_Fm)
-+{
-+    t_Fm        *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_Fm, E_INVALID_HANDLE, NULL);
-+
-+    return (p_Fm->h_FmMuram);
-+}
-+
-+void FmGetPhysicalMuramBase(t_Handle h_Fm, t_FmPhysAddr *p_FmPhysAddr)
-+{
-+    t_Fm            *p_Fm = (t_Fm*)h_Fm;
-+
-+    if (p_Fm->fmMuramPhysBaseAddr)
-+    {
-+        /* General FM driver initialization */
-+        p_FmPhysAddr->low = (uint32_t)p_Fm->fmMuramPhysBaseAddr;
-+        p_FmPhysAddr->high = (uint8_t)((p_Fm->fmMuramPhysBaseAddr & 0x000000ff00000000LL) >> 32);
-+        return;
-+    }
-+
-+    ASSERT_COND(p_Fm->guestId != NCSW_MASTER_ID);
-+
-+    if (p_Fm->h_IpcSessions[0])
-+    {
-+        t_Error         err;
-+        t_FmIpcMsg      msg;
-+        t_FmIpcReply    reply;
-+        uint32_t        replyLength;
-+        t_FmIpcPhysAddr ipcPhysAddr;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_GET_PHYS_MURAM_BASE;
-+        replyLength = sizeof(uint32_t) + sizeof(t_FmPhysAddr);
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId),
-+                                (uint8_t*)&reply,
-+                                &replyLength,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+        {
-+            REPORT_ERROR(MINOR, err, NO_MSG);
-+            return;
-+        }
-+        if (replyLength != (sizeof(uint32_t) + sizeof(t_FmPhysAddr)))
-+        {
-+            REPORT_ERROR(MINOR, E_INVALID_VALUE,("IPC reply length mismatch"));
-+            return;
-+        }
-+        memcpy((uint8_t*)&ipcPhysAddr, reply.replyBody, sizeof(t_FmIpcPhysAddr));
-+        p_FmPhysAddr->high = ipcPhysAddr.high;
-+        p_FmPhysAddr->low  = ipcPhysAddr.low;
-+    }
-+    else
-+        REPORT_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("running in guest-mode without neither IPC nor mapped register!"));
-+}
-+
-+#if (DPAA_VERSION >= 11)
-+t_Error FmVSPAllocForPort (t_Handle        h_Fm,
-+                           e_FmPortType    portType,
-+                           uint8_t         portId,
-+                           uint8_t         numOfVSPs)
-+{
-+    t_Fm           *p_Fm = (t_Fm *)h_Fm;
-+    t_Error        err = E_OK;
-+    uint32_t       profilesFound, intFlags;
-+    uint8_t        first, i;
-+    uint8_t        log2Num;
-+    uint8_t        swPortIndex=0, hardwarePortId;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+
-+     if (!numOfVSPs)
-+        return E_OK;
-+
-+    if (numOfVSPs > FM_VSP_MAX_NUM_OF_ENTRIES)
-+        RETURN_ERROR(MINOR, E_INVALID_VALUE, ("numProfiles can not be bigger than %d.",FM_VSP_MAX_NUM_OF_ENTRIES));
-+
-+    if (!POWER_OF_2(numOfVSPs))
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("numProfiles must be a power of 2."));
-+
-+    LOG2((uint64_t)numOfVSPs, log2Num);
-+
-+    if ((log2Num == 0) || (p_Fm->partVSPBase == 0))
-+        first = 0;
-+    else
-+        first = 1<<log2Num;
-+
-+    if (first > (p_Fm->partVSPBase + p_Fm->partNumOfVSPs))
-+         RETURN_ERROR(MINOR, E_INVALID_VALUE, ("can not allocate storage profile port window"));
-+
-+    if (first < p_Fm->partVSPBase)
-+        while (first < p_Fm->partVSPBase)
-+            first = first + numOfVSPs;
-+
-+    if ((first + numOfVSPs) > (p_Fm->partVSPBase + p_Fm->partNumOfVSPs))
-+        RETURN_ERROR(MINOR, E_INVALID_VALUE, ("can not allocate storage profile port window"));
-+
-+    intFlags = XX_LockIntrSpinlock(p_Fm->h_Spinlock);
-+    profilesFound = 0;
-+    for (i=first; i < p_Fm->partVSPBase + p_Fm->partNumOfVSPs; )
-+    {
-+        if (!p_Fm->p_FmSp->profiles[i].profilesMng.allocated)
-+        {
-+            profilesFound++;
-+            i++;
-+            if (profilesFound == numOfVSPs)
-+                break;
-+        }
-+        else
-+        {
-+            profilesFound = 0;
-+            /* advance i to the next aligned address */
-+            first = i = (uint8_t)(first + numOfVSPs);
-+        }
-+    }
-+    if (profilesFound == numOfVSPs)
-+        for (i = first; i<first + numOfVSPs; i++)
-+            p_Fm->p_FmSp->profiles[i].profilesMng.allocated = TRUE;
-+    else
-+    {
-+        XX_UnlockIntrSpinlock(p_Fm->h_Spinlock, intFlags);
-+        RETURN_ERROR(MINOR, E_FULL, ("No profiles."));
-+    }
-+
-+    hardwarePortId = SwPortIdToHwPortId(portType,
-+                                    portId,
-+                                    p_Fm->p_FmStateStruct->revInfo.majorRev,
-+                                    p_Fm->p_FmStateStruct->revInfo.minorRev);
-+    HW_PORT_ID_TO_SW_PORT_INDX(swPortIndex, hardwarePortId);
-+
-+    p_Fm->p_FmSp->portsMapping[swPortIndex].numOfProfiles = numOfVSPs;
-+    p_Fm->p_FmSp->portsMapping[swPortIndex].profilesBase = first;
-+
-+    if ((err = SetVSPWindow(h_Fm,hardwarePortId, first,log2Num)) != E_OK)
-+        for (i = first; i < first + numOfVSPs; i++)
-+            p_Fm->p_FmSp->profiles[i].profilesMng.allocated = FALSE;
-+
-+    XX_UnlockIntrSpinlock(p_Fm->h_Spinlock, intFlags);
-+
-+    return err;
-+}
-+
-+t_Error FmVSPFreeForPort(t_Handle        h_Fm,
-+                         e_FmPortType    portType,
-+                         uint8_t         portId)
-+{
-+    t_Fm            *p_Fm = (t_Fm *)h_Fm;
-+    uint8_t         swPortIndex=0, hardwarePortId, first, numOfVSPs, i;
-+    uint32_t        intFlags;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+
-+    hardwarePortId = SwPortIdToHwPortId(portType,
-+                                    portId,
-+                                    p_Fm->p_FmStateStruct->revInfo.majorRev,
-+                                    p_Fm->p_FmStateStruct->revInfo.minorRev);
-+    HW_PORT_ID_TO_SW_PORT_INDX(swPortIndex, hardwarePortId);
-+
-+    numOfVSPs = (uint8_t)p_Fm->p_FmSp->portsMapping[swPortIndex].numOfProfiles;
-+    first = (uint8_t)p_Fm->p_FmSp->portsMapping[swPortIndex].profilesBase;
-+
-+    intFlags = XX_LockIntrSpinlock(p_Fm->h_Spinlock);
-+    for (i = first; i < first + numOfVSPs; i++)
-+           p_Fm->p_FmSp->profiles[i].profilesMng.allocated = FALSE;
-+    XX_UnlockIntrSpinlock(p_Fm->h_Spinlock, intFlags);
-+
-+    p_Fm->p_FmSp->portsMapping[swPortIndex].numOfProfiles = 0;
-+    p_Fm->p_FmSp->portsMapping[swPortIndex].profilesBase = 0;
-+
-+    return E_OK;
-+}
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+t_Error FmAllocFmanCtrlEventReg(t_Handle h_Fm, uint8_t *p_EventId)
-+{
-+    t_Fm            *p_Fm = (t_Fm*)h_Fm;
-+    uint8_t         i;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_Error         err;
-+        t_FmIpcMsg      msg;
-+        t_FmIpcReply    reply;
-+        uint32_t        replyLength;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_ALLOC_FMAN_CTRL_EVENT_REG;
-+        replyLength = sizeof(uint32_t) + sizeof(uint8_t);
-+        if ((err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                     (uint8_t*)&msg,
-+                                     sizeof(msg.msgId),
-+                                     (uint8_t*)&reply,
-+                                     &replyLength,
-+                                     NULL,
-+                                     NULL)) != E_OK)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+        if (replyLength != (sizeof(uint32_t) + sizeof(uint8_t)))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+
-+        *p_EventId = *(uint8_t*)(reply.replyBody);
-+
-+        return (t_Error)(reply.error);
-+    }
-+    else if (p_Fm->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("running in guest-mode without IPC!"));
-+
-+    for (i=0;i<FM_NUM_OF_FMAN_CTRL_EVENT_REGS;i++)
-+        if (!p_Fm->usedEventRegs[i])
-+        {
-+            p_Fm->usedEventRegs[i] = TRUE;
-+            *p_EventId = i;
-+            break;
-+        }
-+
-+    if (i==FM_NUM_OF_FMAN_CTRL_EVENT_REGS)
-+        RETURN_ERROR(MAJOR, E_BUSY, ("No resource - FMan controller event register."));
-+
-+    return E_OK;
-+}
-+
-+void FmFreeFmanCtrlEventReg(t_Handle h_Fm, uint8_t eventId)
-+{
-+    t_Fm        *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN(p_Fm, E_INVALID_HANDLE);
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_Error     err;
-+        t_FmIpcMsg  msg;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        msg.msgId = FM_FREE_FMAN_CTRL_EVENT_REG;
-+        msg.msgBody[0] = eventId;
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId)+sizeof(eventId),
-+                                NULL,
-+                                NULL,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            REPORT_ERROR(MINOR, err, NO_MSG);
-+        return;
-+    }
-+    else if (p_Fm->guestId != NCSW_MASTER_ID)
-+    {
-+        REPORT_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("running in guest-mode without IPC!"));
-+        return;
-+    }
-+
-+    ((t_Fm*)h_Fm)->usedEventRegs[eventId] = FALSE;
-+}
-+
-+void FmSetFmanCtrlIntr(t_Handle h_Fm, uint8_t eventRegId, uint32_t enableEvents)
-+{
-+    t_Fm                *p_Fm = (t_Fm*)h_Fm;
-+    struct fman_fpm_regs *fpm_rg = p_Fm->p_FmFpmRegs;
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        !p_Fm->p_FmFpmRegs &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_FmIpcFmanEvents   fmanCtrl;
-+        t_Error             err;
-+        t_FmIpcMsg          msg;
-+
-+        fmanCtrl.eventRegId = eventRegId;
-+        fmanCtrl.enableEvents = enableEvents;
-+        memset(&msg, 0, sizeof(msg));
-+        msg.msgId = FM_SET_FMAN_CTRL_EVENTS_ENABLE;
-+        memcpy(msg.msgBody, &fmanCtrl, sizeof(fmanCtrl));
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId)+sizeof(fmanCtrl),
-+                                NULL,
-+                                NULL,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            REPORT_ERROR(MINOR, err, NO_MSG);
-+        return;
-+    }
-+    else if (!p_Fm->p_FmFpmRegs)
-+    {
-+        REPORT_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("Either IPC or 'baseAddress' is required!"));
-+        return;
-+    }
-+
-+    ASSERT_COND(eventRegId < FM_NUM_OF_FMAN_CTRL_EVENT_REGS);
-+    fman_set_ctrl_intr(fpm_rg, eventRegId, enableEvents);
-+}
-+
-+uint32_t FmGetFmanCtrlIntr(t_Handle h_Fm, uint8_t eventRegId)
-+{
-+    t_Fm            *p_Fm = (t_Fm*)h_Fm;
-+    struct fman_fpm_regs *fpm_rg = p_Fm->p_FmFpmRegs;
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        !p_Fm->p_FmFpmRegs &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_Error         err;
-+        t_FmIpcMsg      msg;
-+        t_FmIpcReply    reply;
-+        uint32_t        replyLength, ctrlIntr;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_GET_FMAN_CTRL_EVENTS_ENABLE;
-+        msg.msgBody[0] = eventRegId;
-+        replyLength = sizeof(uint32_t) + sizeof(uint32_t);
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId)+sizeof(eventRegId),
-+                                (uint8_t*)&reply,
-+                                &replyLength,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+        {
-+            REPORT_ERROR(MINOR, err, NO_MSG);
-+            return 0;
-+        }
-+        if (replyLength != (sizeof(uint32_t) + sizeof(uint32_t)))
-+        {
-+            REPORT_ERROR(MINOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+            return 0;
-+        }
-+        memcpy((uint8_t*)&ctrlIntr, reply.replyBody, sizeof(uint32_t));
-+        return ctrlIntr;
-+    }
-+    else if (!p_Fm->p_FmFpmRegs)
-+    {
-+        REPORT_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("Either IPC or 'baseAddress' is required!"));
-+        return 0;
-+    }
-+
-+    return fman_get_ctrl_intr(fpm_rg, eventRegId);
-+}
-+
-+void FmRegisterIntr(t_Handle                h_Fm,
-+                    e_FmEventModules        module,
-+                    uint8_t                 modId,
-+                    e_FmIntrType            intrType,
-+                    void                    (*f_Isr) (t_Handle h_Arg),
-+                    t_Handle                h_Arg)
-+{
-+    t_Fm                *p_Fm = (t_Fm*)h_Fm;
-+    int                 event = 0;
-+
-+    ASSERT_COND(h_Fm);
-+
-+    GET_FM_MODULE_EVENT(module, modId, intrType, event);
-+    ASSERT_COND(event < e_FM_EV_DUMMY_LAST);
-+
-+    /* register in local FM structure */
-+    p_Fm->intrMng[event].f_Isr = f_Isr;
-+    p_Fm->intrMng[event].h_SrcHandle = h_Arg;
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_FmIpcRegisterIntr fmIpcRegisterIntr;
-+        t_Error             err;
-+        t_FmIpcMsg          msg;
-+
-+        /* register in Master FM structure */
-+        fmIpcRegisterIntr.event = (uint32_t)event;
-+        fmIpcRegisterIntr.guestId = p_Fm->guestId;
-+        memset(&msg, 0, sizeof(msg));
-+        msg.msgId = FM_REGISTER_INTR;
-+        memcpy(msg.msgBody, &fmIpcRegisterIntr, sizeof(fmIpcRegisterIntr));
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId) + sizeof(fmIpcRegisterIntr),
-+                                NULL,
-+                                NULL,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            REPORT_ERROR(MINOR, err, NO_MSG);
-+    }
-+    else if (p_Fm->guestId != NCSW_MASTER_ID)
-+        REPORT_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("running in guest-mode without IPC!"));
-+}
-+
-+void FmUnregisterIntr(t_Handle                  h_Fm,
-+                        e_FmEventModules        module,
-+                        uint8_t                 modId,
-+                        e_FmIntrType            intrType)
-+{
-+    t_Fm        *p_Fm = (t_Fm*)h_Fm;
-+    int         event = 0;
-+
-+    ASSERT_COND(h_Fm);
-+
-+    GET_FM_MODULE_EVENT(module, modId,intrType, event);
-+    ASSERT_COND(event < e_FM_EV_DUMMY_LAST);
-+
-+    p_Fm->intrMng[event].f_Isr = UnimplementedIsr;
-+    p_Fm->intrMng[event].h_SrcHandle = NULL;
-+}
-+
-+void  FmRegisterFmanCtrlIntr(t_Handle h_Fm, uint8_t eventRegId, void (*f_Isr) (t_Handle h_Arg, uint32_t event), t_Handle    h_Arg)
-+{
-+    t_Fm       *p_Fm = (t_Fm*)h_Fm;
-+
-+    ASSERT_COND(eventRegId<FM_NUM_OF_FMAN_CTRL_EVENT_REGS);
-+
-+    if (p_Fm->guestId != NCSW_MASTER_ID)
-+    {
-+        REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("FM in guest-mode"));
-+        return;
-+    }
-+
-+    p_Fm->fmanCtrlIntr[eventRegId].f_Isr = f_Isr;
-+    p_Fm->fmanCtrlIntr[eventRegId].h_SrcHandle = h_Arg;
-+}
-+
-+void  FmUnregisterFmanCtrlIntr(t_Handle h_Fm, uint8_t eventRegId)
-+{
-+    t_Fm       *p_Fm = (t_Fm*)h_Fm;
-+
-+    ASSERT_COND(eventRegId<FM_NUM_OF_FMAN_CTRL_EVENT_REGS);
-+
-+    if (p_Fm->guestId != NCSW_MASTER_ID)
-+    {
-+        REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("FM in guest-mode"));
-+        return;
-+    }
-+
-+    p_Fm->fmanCtrlIntr[eventRegId].f_Isr = UnimplementedFmanCtrlIsr;
-+    p_Fm->fmanCtrlIntr[eventRegId].h_SrcHandle = NULL;
-+}
-+
-+void  FmRegisterPcd(t_Handle h_Fm, t_Handle h_FmPcd)
-+{
-+    t_Fm       *p_Fm = (t_Fm*)h_Fm;
-+
-+    if (p_Fm->h_Pcd)
-+        REPORT_ERROR(MAJOR, E_ALREADY_EXISTS, ("PCD already set"));
-+
-+    p_Fm->h_Pcd = h_FmPcd;
-+}
-+
-+void  FmUnregisterPcd(t_Handle h_Fm)
-+{
-+    t_Fm       *p_Fm = (t_Fm*)h_Fm;
-+
-+    if (!p_Fm->h_Pcd)
-+        REPORT_ERROR(MAJOR, E_NOT_FOUND, ("PCD handle!"));
-+
-+    p_Fm->h_Pcd = NULL;
-+}
-+
-+t_Handle FmGetPcdHandle(t_Handle h_Fm)
-+{
-+    t_Fm       *p_Fm = (t_Fm*)h_Fm;
-+
-+    return p_Fm->h_Pcd;
-+}
-+
-+uint8_t FmGetId(t_Handle h_Fm)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_Fm, E_INVALID_HANDLE, 0xff);
-+
-+    return p_Fm->p_FmStateStruct->fmId;
-+}
-+
-+t_Error FmReset(t_Handle h_Fm)
-+{
-+	t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+
-+    WRITE_UINT32(p_Fm->p_FmFpmRegs->fm_rstc, FPM_RSTC_FM_RESET);
-+    CORE_MemoryBarrier();
-+    XX_UDelay(100);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmSetNumOfRiscsPerPort(t_Handle     h_Fm,
-+                               uint8_t      hardwarePortId,
-+                               uint8_t      numOfFmanCtrls,
-+                               t_FmFmanCtrl orFmanCtrl)
-+{
-+
-+    t_Fm                        *p_Fm = (t_Fm*)h_Fm;
-+    struct fman_fpm_regs *fpm_rg;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(((numOfFmanCtrls > 0) && (numOfFmanCtrls < 3)) , E_INVALID_HANDLE);
-+
-+    fpm_rg = p_Fm->p_FmFpmRegs;
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        !p_Fm->p_FmFpmRegs &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_Error                     err;
-+        t_FmIpcPortNumOfFmanCtrls   params;
-+        t_FmIpcMsg                  msg;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        params.hardwarePortId = hardwarePortId;
-+        params.numOfFmanCtrls = numOfFmanCtrls;
-+        params.orFmanCtrl = orFmanCtrl;
-+        msg.msgId = FM_SET_NUM_OF_FMAN_CTRL;
-+        memcpy(msg.msgBody, &params, sizeof(params));
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId) +sizeof(params),
-+                                NULL,
-+                                NULL,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        return E_OK;
-+    }
-+    else if (!p_Fm->p_FmFpmRegs)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("Either IPC or 'baseAddress' is required!"));
-+
-+    fman_set_num_of_riscs_per_port(fpm_rg, hardwarePortId, numOfFmanCtrls, orFmanCtrl);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmGetSetPortParams(t_Handle h_Fm, t_FmInterModulePortInitParams *p_PortParams)
-+{
-+    t_Fm                    *p_Fm = (t_Fm*)h_Fm;
-+    t_Error                 err;
-+    uint32_t                intFlags;
-+    uint8_t                 hardwarePortId = p_PortParams->hardwarePortId, macId;
-+    struct fman_rg          fman_rg;
-+
-+    fman_rg.bmi_rg = p_Fm->p_FmBmiRegs;
-+    fman_rg.qmi_rg = p_Fm->p_FmQmiRegs;
-+    fman_rg.fpm_rg = p_Fm->p_FmFpmRegs;
-+    fman_rg.dma_rg = p_Fm->p_FmDmaRegs;
-+
-+    if (p_Fm->guestId != NCSW_MASTER_ID)
-+    {
-+        t_FmIpcPortInInitParams     portInParams;
-+        t_FmIpcPortOutInitParams    portOutParams;
-+        t_FmIpcMsg                  msg;
-+        t_FmIpcReply                reply;
-+        uint32_t                    replyLength;
-+
-+        portInParams.hardwarePortId     = p_PortParams->hardwarePortId;
-+        portInParams.enumPortType       = (uint32_t)p_PortParams->portType;
-+        portInParams.boolIndependentMode= (uint8_t)p_PortParams->independentMode;
-+        portInParams.liodnOffset        = p_PortParams->liodnOffset;
-+        portInParams.numOfTasks         = p_PortParams->numOfTasks;
-+        portInParams.numOfExtraTasks    = p_PortParams->numOfExtraTasks;
-+        portInParams.numOfOpenDmas      = p_PortParams->numOfOpenDmas;
-+        portInParams.numOfExtraOpenDmas = p_PortParams->numOfExtraOpenDmas;
-+        portInParams.sizeOfFifo         = p_PortParams->sizeOfFifo;
-+        portInParams.extraSizeOfFifo    = p_PortParams->extraSizeOfFifo;
-+        portInParams.deqPipelineDepth   = p_PortParams->deqPipelineDepth;
-+        portInParams.maxFrameLength     = p_PortParams->maxFrameLength;
-+        portInParams.liodnBase          = p_PortParams->liodnBase;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_GET_SET_PORT_PARAMS;
-+        memcpy(msg.msgBody, &portInParams, sizeof(portInParams));
-+        replyLength = (sizeof(uint32_t) + sizeof(t_FmIpcPortOutInitParams));
-+        if ((err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                     (uint8_t*)&msg,
-+                                     sizeof(msg.msgId) +sizeof(portInParams),
-+                                     (uint8_t*)&reply,
-+                                     &replyLength,
-+                                     NULL,
-+                                     NULL)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        if (replyLength != (sizeof(uint32_t) + sizeof(t_FmIpcPortOutInitParams)))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+        memcpy((uint8_t*)&portOutParams, reply.replyBody, sizeof(t_FmIpcPortOutInitParams));
-+
-+        p_PortParams->fmMuramPhysBaseAddr.high = portOutParams.ipcPhysAddr.high;
-+        p_PortParams->fmMuramPhysBaseAddr.low  = portOutParams.ipcPhysAddr.low;
-+        p_PortParams->numOfTasks = portOutParams.numOfTasks;
-+        p_PortParams->numOfExtraTasks = portOutParams.numOfExtraTasks;
-+        p_PortParams->numOfOpenDmas = portOutParams.numOfOpenDmas;
-+        p_PortParams->numOfExtraOpenDmas = portOutParams.numOfExtraOpenDmas;
-+        p_PortParams->sizeOfFifo = portOutParams.sizeOfFifo;
-+        p_PortParams->extraSizeOfFifo = portOutParams.extraSizeOfFifo;
-+
-+        return (t_Error)(reply.error);
-+    }
-+
-+    ASSERT_COND(IN_RANGE(1, hardwarePortId, 63));
-+
-+    intFlags = XX_LockIntrSpinlock(p_Fm->h_Spinlock);
-+    if (p_PortParams->independentMode)
-+    {
-+        /* set port parameters */
-+        p_Fm->independentMode = p_PortParams->independentMode;
-+        /* disable dispatch limit */
-+        fman_qmi_disable_dispatch_limit(fman_rg.fpm_rg);
-+    }
-+
-+    if (p_PortParams->portType == e_FM_PORT_TYPE_OH_HOST_COMMAND)
-+    {
-+        if (p_Fm->hcPortInitialized)
-+        {
-+            XX_UnlockIntrSpinlock(p_Fm->h_Spinlock, intFlags);
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Only one host command port is allowed."));
-+        }
-+        else
-+            p_Fm->hcPortInitialized = TRUE;
-+    }
-+    p_Fm->p_FmStateStruct->portsTypes[hardwarePortId] = p_PortParams->portType;
-+
-+    err = FmSetNumOfTasks(p_Fm, hardwarePortId, &p_PortParams->numOfTasks, &p_PortParams->numOfExtraTasks, TRUE);
-+    if (err)
-+    {
-+        XX_UnlockIntrSpinlock(p_Fm->h_Spinlock, intFlags);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+#ifdef FM_QMI_NO_DEQ_OPTIONS_SUPPORT
-+    if (p_Fm->p_FmStateStruct->revInfo.majorRev != 4)
-+#endif /* FM_QMI_NO_DEQ_OPTIONS_SUPPORT */
-+    if ((p_PortParams->portType != e_FM_PORT_TYPE_RX) &&
-+       (p_PortParams->portType != e_FM_PORT_TYPE_RX_10G))
-+    /* for transmit & O/H ports */
-+    {
-+        uint8_t     enqTh;
-+        uint8_t     deqTh;
-+
-+        /* update qmi ENQ/DEQ threshold */
-+        p_Fm->p_FmStateStruct->accumulatedNumOfDeqTnums += p_PortParams->deqPipelineDepth;
-+        enqTh = fman_get_qmi_enq_th(fman_rg.qmi_rg);
-+        /* if enqTh is too big, we reduce it to the max value that is still OK */
-+        if (enqTh >= (QMI_MAX_NUM_OF_TNUMS - p_Fm->p_FmStateStruct->accumulatedNumOfDeqTnums))
-+        {
-+            enqTh = (uint8_t)(QMI_MAX_NUM_OF_TNUMS - p_Fm->p_FmStateStruct->accumulatedNumOfDeqTnums - 1);
-+            fman_set_qmi_enq_th(fman_rg.qmi_rg, enqTh);
-+        }
-+
-+        deqTh = fman_get_qmi_deq_th(fman_rg.qmi_rg);
-+        /* if deqTh is too small, we enlarge it to the min value that is still OK.
-+         deqTh may not be larger than 63 (QMI_MAX_NUM_OF_TNUMS-1). */
-+        if ((deqTh <= p_Fm->p_FmStateStruct->accumulatedNumOfDeqTnums)  && (deqTh < QMI_MAX_NUM_OF_TNUMS-1))
-+        {
-+            deqTh = (uint8_t)(p_Fm->p_FmStateStruct->accumulatedNumOfDeqTnums + 1);
-+            fman_set_qmi_deq_th(fman_rg.qmi_rg, deqTh);
-+        }
-+    }
-+
-+#ifdef FM_LOW_END_RESTRICTION
-+    if ((hardwarePortId==0x1) || (hardwarePortId==0x29))
-+    {
-+        if (p_Fm->p_FmStateStruct->lowEndRestriction)
-+        {
-+            XX_UnlockIntrSpinlock(p_Fm->h_Spinlock, intFlags);
-+            RETURN_ERROR(MAJOR, E_NOT_AVAILABLE, ("OP #0 cannot work with Tx Port #1."));
-+        }
-+        else
-+            p_Fm->p_FmStateStruct->lowEndRestriction = TRUE;
-+    }
-+#endif /* FM_LOW_END_RESTRICTION */
-+
-+    err = FmSetSizeOfFifo(p_Fm,
-+                          hardwarePortId,
-+                          &p_PortParams->sizeOfFifo,
-+                          &p_PortParams->extraSizeOfFifo,
-+                          TRUE);
-+    if (err)
-+    {
-+        XX_UnlockIntrSpinlock(p_Fm->h_Spinlock, intFlags);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    err = FmSetNumOfOpenDmas(p_Fm,
-+                             hardwarePortId,
-+                             &p_PortParams->numOfOpenDmas,
-+                             &p_PortParams->numOfExtraOpenDmas,
-+                             TRUE);
-+    if (err)
-+    {
-+        XX_UnlockIntrSpinlock(p_Fm->h_Spinlock, intFlags);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    fman_set_liodn_per_port(&fman_rg,
-+                            hardwarePortId,
-+                            p_PortParams->liodnBase,
-+                            p_PortParams->liodnOffset);
-+
-+    if (p_Fm->p_FmStateStruct->revInfo.majorRev < 6)
-+        fman_set_order_restoration_per_port(fman_rg.fpm_rg,
-+                                            hardwarePortId,
-+                                            p_PortParams->independentMode,
-+                                            !!((p_PortParams->portType==e_FM_PORT_TYPE_RX) || (p_PortParams->portType==e_FM_PORT_TYPE_RX_10G)));
-+
-+    HW_PORT_ID_TO_SW_PORT_ID(macId, hardwarePortId);
-+
-+#if defined(FM_MAX_NUM_OF_10G_MACS) && (FM_MAX_NUM_OF_10G_MACS)
-+    if ((p_PortParams->portType == e_FM_PORT_TYPE_TX_10G) ||
-+        (p_PortParams->portType == e_FM_PORT_TYPE_RX_10G))
-+    {
-+        ASSERT_COND(macId < FM_MAX_NUM_OF_10G_MACS);
-+        if (p_PortParams->maxFrameLength >= p_Fm->p_FmStateStruct->macMaxFrameLengths10G[macId])
-+            p_Fm->p_FmStateStruct->portMaxFrameLengths10G[macId] = p_PortParams->maxFrameLength;
-+        else
-+            RETURN_ERROR(MINOR, E_INVALID_VALUE, ("Port maxFrameLength is smaller than MAC current MTU"));
-+    }
-+    else
-+#endif /* defined(FM_MAX_NUM_OF_10G_MACS) && ... */
-+    if ((p_PortParams->portType == e_FM_PORT_TYPE_TX) ||
-+        (p_PortParams->portType == e_FM_PORT_TYPE_RX))
-+    {
-+        ASSERT_COND(macId < FM_MAX_NUM_OF_1G_MACS);
-+        if (p_PortParams->maxFrameLength >= p_Fm->p_FmStateStruct->macMaxFrameLengths1G[macId])
-+            p_Fm->p_FmStateStruct->portMaxFrameLengths1G[macId] = p_PortParams->maxFrameLength;
-+        else
-+            RETURN_ERROR(MINOR, E_INVALID_VALUE, ("Port maxFrameLength is smaller than MAC current MTU"));
-+    }
-+
-+    FmGetPhysicalMuramBase(p_Fm, &p_PortParams->fmMuramPhysBaseAddr);
-+    XX_UnlockIntrSpinlock(p_Fm->h_Spinlock, intFlags);
-+
-+    return E_OK;
-+}
-+
-+void FmFreePortParams(t_Handle h_Fm,t_FmInterModulePortFreeParams *p_PortParams)
-+{
-+    t_Fm                    *p_Fm = (t_Fm*)h_Fm;
-+    uint32_t                intFlags;
-+    uint8_t                 hardwarePortId = p_PortParams->hardwarePortId;
-+    uint8_t                 numOfTasks, numOfDmas, macId;
-+    uint16_t                sizeOfFifo;
-+    t_Error                 err;
-+    t_FmIpcPortFreeParams   portParams;
-+    t_FmIpcMsg              msg;
-+    struct fman_qmi_regs *qmi_rg = p_Fm->p_FmQmiRegs;
-+    struct fman_bmi_regs *bmi_rg = p_Fm->p_FmBmiRegs;
-+
-+    if (p_Fm->guestId != NCSW_MASTER_ID)
-+    {
-+        portParams.hardwarePortId = p_PortParams->hardwarePortId;
-+        portParams.enumPortType = (uint32_t)p_PortParams->portType;
-+        portParams.deqPipelineDepth = p_PortParams->deqPipelineDepth;
-+        memset(&msg, 0, sizeof(msg));
-+        msg.msgId = FM_FREE_PORT;
-+        memcpy(msg.msgBody, &portParams, sizeof(portParams));
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId)+sizeof(portParams),
-+                                NULL,
-+                                NULL,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            REPORT_ERROR(MINOR, err, NO_MSG);
-+        return;
-+    }
-+
-+    ASSERT_COND(IN_RANGE(1, hardwarePortId, 63));
-+
-+    intFlags = XX_LockIntrSpinlock(p_Fm->h_Spinlock);
-+
-+    if (p_PortParams->portType == e_FM_PORT_TYPE_OH_HOST_COMMAND)
-+    {
-+        ASSERT_COND(p_Fm->hcPortInitialized);
-+        p_Fm->hcPortInitialized = FALSE;
-+    }
-+
-+    p_Fm->p_FmStateStruct->portsTypes[hardwarePortId] = e_FM_PORT_TYPE_DUMMY;
-+
-+    /* free numOfTasks */
-+    numOfTasks = fman_get_num_of_tasks(bmi_rg, hardwarePortId);
-+    ASSERT_COND(p_Fm->p_FmStateStruct->accumulatedNumOfTasks >= numOfTasks);
-+    p_Fm->p_FmStateStruct->accumulatedNumOfTasks -= numOfTasks;
-+
-+    /* free numOfOpenDmas */
-+    numOfDmas = fman_get_num_of_dmas(bmi_rg, hardwarePortId);
-+    ASSERT_COND(p_Fm->p_FmStateStruct->accumulatedNumOfOpenDmas >= numOfDmas);
-+    p_Fm->p_FmStateStruct->accumulatedNumOfOpenDmas -= numOfDmas;
-+
-+#ifdef FM_HAS_TOTAL_DMAS
-+    if (p_Fm->p_FmStateStruct->revInfo.majorRev < 6)
-+    {
-+        /* update total num of DMA's with committed number of open DMAS, and max uncommitted pool. */
-+        fman_set_num_of_open_dmas(bmi_rg,
-+                                  hardwarePortId,
-+                                  1,
-+                                  0,
-+                         (uint8_t)(p_Fm->p_FmStateStruct->accumulatedNumOfOpenDmas + p_Fm->p_FmStateStruct->extraOpenDmasPoolSize));
-+    }
-+#endif /* FM_HAS_TOTAL_DMAS */
-+
-+    /* free sizeOfFifo */
-+    sizeOfFifo = fman_get_size_of_fifo(bmi_rg, hardwarePortId);
-+    ASSERT_COND(p_Fm->p_FmStateStruct->accumulatedFifoSize >= (sizeOfFifo * BMI_FIFO_UNITS));
-+    p_Fm->p_FmStateStruct->accumulatedFifoSize -= (sizeOfFifo * BMI_FIFO_UNITS);
-+
-+#ifdef FM_QMI_NO_DEQ_OPTIONS_SUPPORT
-+    if (p_Fm->p_FmStateStruct->revInfo.majorRev != 4)
-+#endif /* FM_QMI_NO_DEQ_OPTIONS_SUPPORT */
-+    if ((p_PortParams->portType != e_FM_PORT_TYPE_RX) &&
-+        (p_PortParams->portType != e_FM_PORT_TYPE_RX_10G))
-+    /* for transmit & O/H ports */
-+    {
-+        uint8_t     enqTh;
-+        uint8_t     deqTh;
-+
-+        /* update qmi ENQ/DEQ threshold */
-+        p_Fm->p_FmStateStruct->accumulatedNumOfDeqTnums -= p_PortParams->deqPipelineDepth;
-+
-+        /* p_Fm->p_FmStateStruct->accumulatedNumOfDeqTnums is now smaller,
-+           so we can enlarge enqTh */
-+        enqTh = (uint8_t)(QMI_MAX_NUM_OF_TNUMS - p_Fm->p_FmStateStruct->accumulatedNumOfDeqTnums - 1);
-+
-+         /* p_Fm->p_FmStateStruct->accumulatedNumOfDeqTnums is now smaller,
-+            so we can reduce deqTh */
-+        deqTh = (uint8_t)(p_Fm->p_FmStateStruct->accumulatedNumOfDeqTnums + 1);
-+
-+        fman_set_qmi_enq_th(qmi_rg, enqTh);
-+        fman_set_qmi_deq_th(qmi_rg, deqTh);
-+    }
-+
-+    HW_PORT_ID_TO_SW_PORT_ID(macId, hardwarePortId);
-+
-+#if defined(FM_MAX_NUM_OF_10G_MACS) && (FM_MAX_NUM_OF_10G_MACS)
-+    if ((p_PortParams->portType == e_FM_PORT_TYPE_TX_10G) ||
-+        (p_PortParams->portType == e_FM_PORT_TYPE_RX_10G))
-+    {
-+        ASSERT_COND(macId < FM_MAX_NUM_OF_10G_MACS);
-+        p_Fm->p_FmStateStruct->portMaxFrameLengths10G[macId] = 0;
-+    }
-+    else
-+#endif /* defined(FM_MAX_NUM_OF_10G_MACS) && ... */
-+    if ((p_PortParams->portType == e_FM_PORT_TYPE_TX) ||
-+        (p_PortParams->portType == e_FM_PORT_TYPE_RX))
-+    {
-+        ASSERT_COND(macId < FM_MAX_NUM_OF_1G_MACS);
-+        p_Fm->p_FmStateStruct->portMaxFrameLengths1G[macId] = 0;
-+    }
-+
-+#ifdef FM_LOW_END_RESTRICTION
-+    if ((hardwarePortId==0x1) || (hardwarePortId==0x29))
-+        p_Fm->p_FmStateStruct->lowEndRestriction = FALSE;
-+#endif /* FM_LOW_END_RESTRICTION */
-+    XX_UnlockIntrSpinlock(p_Fm->h_Spinlock, intFlags);
-+}
-+
-+t_Error FmIsPortStalled(t_Handle h_Fm, uint8_t hardwarePortId, bool *p_IsStalled)
-+{
-+    t_Fm            *p_Fm = (t_Fm*)h_Fm;
-+    t_Error         err;
-+    t_FmIpcMsg      msg;
-+    t_FmIpcReply    reply;
-+    uint32_t        replyLength;
-+    struct fman_fpm_regs *fpm_rg = p_Fm->p_FmFpmRegs;
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        !p_Fm->baseAddr &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_IS_PORT_STALLED;
-+        msg.msgBody[0] = hardwarePortId;
-+        replyLength = sizeof(uint32_t) + sizeof(uint8_t);
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId)+sizeof(hardwarePortId),
-+                                (uint8_t*)&reply,
-+                                &replyLength,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        if (replyLength != (sizeof(uint32_t) + sizeof(uint8_t)))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+
-+        *p_IsStalled = (bool)!!(*(uint8_t*)(reply.replyBody));
-+
-+        return (t_Error)(reply.error);
-+    }
-+    else if (!p_Fm->baseAddr)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("Either IPC or 'baseAddress' is required!"));
-+
-+    *p_IsStalled = fman_is_port_stalled(fpm_rg, hardwarePortId);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmResumeStalledPort(t_Handle h_Fm, uint8_t hardwarePortId)
-+{
-+    t_Fm            *p_Fm = (t_Fm*)h_Fm;
-+    t_Error         err;
-+    bool            isStalled;
-+    struct fman_fpm_regs *fpm_rg = p_Fm->p_FmFpmRegs;
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        !p_Fm->baseAddr &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_FmIpcMsg      msg;
-+        t_FmIpcReply    reply;
-+        uint32_t        replyLength;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_RESUME_STALLED_PORT;
-+        msg.msgBody[0] = hardwarePortId;
-+        replyLength = sizeof(uint32_t);
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId) + sizeof(hardwarePortId),
-+                                (uint8_t*)&reply,
-+                                &replyLength,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        if (replyLength != sizeof(uint32_t))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+        return (t_Error)(reply.error);
-+    }
-+    else if (!p_Fm->baseAddr)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("Either IPC or 'baseAddress' is required!"));
-+
-+    if (p_Fm->p_FmStateStruct->revInfo.majorRev >= 6)
-+        RETURN_ERROR(MINOR, E_NOT_AVAILABLE, ("Not available for this FM revision!"));
-+
-+    /* Get port status */
-+    err = FmIsPortStalled(h_Fm, hardwarePortId, &isStalled);
-+    if (err)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Can't get port status"));
-+    if (!isStalled)
-+        return E_OK;
-+
-+    fman_resume_stalled_port(fpm_rg, hardwarePortId);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmResetMac(t_Handle h_Fm, e_FmMacType type, uint8_t macId)
-+{
-+    t_Fm                *p_Fm = (t_Fm*)h_Fm;
-+    t_Error             err;
-+    struct fman_fpm_regs *fpm_rg = p_Fm->p_FmFpmRegs;
-+
-+#if (DPAA_VERSION >= 11)
-+    if (p_Fm->p_FmStateStruct->revInfo.majorRev >= 6)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("FMan MAC reset!"));
-+#endif /*(DPAA_VERSION >= 11)*/
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        !p_Fm->baseAddr &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_FmIpcMacParams    macParams;
-+        t_FmIpcMsg          msg;
-+        t_FmIpcReply        reply;
-+        uint32_t            replyLength;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        macParams.id = macId;
-+        macParams.enumType = (uint32_t)type;
-+        msg.msgId = FM_RESET_MAC;
-+        memcpy(msg.msgBody,  &macParams, sizeof(macParams));
-+        replyLength = sizeof(uint32_t);
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId)+sizeof(macParams),
-+                                (uint8_t*)&reply,
-+                                &replyLength,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        if (replyLength != sizeof(uint32_t))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+        return (t_Error)(reply.error);
-+    }
-+    else if (!p_Fm->baseAddr)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("Either IPC or 'baseAddress' is required!"));
-+
-+    err = (t_Error)fman_reset_mac(fpm_rg, macId, !!(type == e_FM_MAC_10G));
-+
-+    if (err == -EBUSY)
-+        return ERROR_CODE(E_TIMEOUT);
-+    else if (err)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal MAC ID"));
-+
-+    return E_OK;
-+}
-+
-+t_Error FmSetMacMaxFrame(t_Handle h_Fm, e_FmMacType type, uint8_t macId, uint16_t mtu)
-+{
-+    t_Fm                        *p_Fm = (t_Fm*)h_Fm;
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_FmIpcMacMaxFrameParams    macMaxFrameLengthParams;
-+        t_Error                     err;
-+        t_FmIpcMsg                  msg;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        macMaxFrameLengthParams.macParams.id = macId;
-+        macMaxFrameLengthParams.macParams.enumType = (uint32_t)type;
-+        macMaxFrameLengthParams.maxFrameLength = (uint16_t)mtu;
-+        msg.msgId = FM_SET_MAC_MAX_FRAME;
-+        memcpy(msg.msgBody,  &macMaxFrameLengthParams, sizeof(macMaxFrameLengthParams));
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId)+sizeof(macMaxFrameLengthParams),
-+                                NULL,
-+                                NULL,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        return E_OK;
-+    }
-+    else if (p_Fm->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("running in guest-mode without IPC!"));
-+
-+    /* if port is already initialized, check that MaxFrameLength is smaller
-+     * or equal to the port's max */
-+#if (defined(FM_MAX_NUM_OF_10G_MACS) && (FM_MAX_NUM_OF_10G_MACS))
-+    if (type == e_FM_MAC_10G)
-+    {
-+        if ((!p_Fm->p_FmStateStruct->portMaxFrameLengths10G[macId])
-+           || (p_Fm->p_FmStateStruct->portMaxFrameLengths10G[macId] &&
-+              (mtu <= p_Fm->p_FmStateStruct->portMaxFrameLengths10G[macId])))
-+               p_Fm->p_FmStateStruct->macMaxFrameLengths10G[macId] = mtu;
-+        else
-+            RETURN_ERROR(MINOR, E_INVALID_VALUE, ("MAC maxFrameLength is larger than Port maxFrameLength"));
-+
-+    }
-+    else
-+#else
-+    UNUSED(type);
-+#endif /* (defined(FM_MAX_NUM_OF_10G_MACS) && ... */
-+    if ((!p_Fm->p_FmStateStruct->portMaxFrameLengths1G[macId])
-+       || (p_Fm->p_FmStateStruct->portMaxFrameLengths1G[macId] &&
-+          (mtu <= p_Fm->p_FmStateStruct->portMaxFrameLengths1G[macId])))
-+        p_Fm->p_FmStateStruct->macMaxFrameLengths1G[macId] = mtu;
-+    else
-+        RETURN_ERROR(MINOR, E_INVALID_VALUE, ("MAC maxFrameLength is larger than Port maxFrameLength"));
-+
-+    return E_OK;
-+}
-+
-+uint16_t FmGetClockFreq(t_Handle h_Fm)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    /* for multicore environment: this depends on the
-+     * fact that fmClkFreq was properly initialized at "init". */
-+    return p_Fm->p_FmStateStruct->fmClkFreq;
-+}
-+
-+uint16_t FmGetMacClockFreq(t_Handle h_Fm)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    return p_Fm->p_FmStateStruct->fmMacClkFreq;
-+}
-+
-+uint32_t FmGetTimeStampScale(t_Handle h_Fm)
-+{
-+    t_Fm                *p_Fm = (t_Fm*)h_Fm;
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        !p_Fm->baseAddr &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_Error             err;
-+        t_FmIpcMsg          msg;
-+        t_FmIpcReply        reply;
-+        uint32_t            replyLength, timeStamp;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_GET_TIMESTAMP_SCALE;
-+        replyLength = sizeof(uint32_t) + sizeof(uint32_t);
-+        if ((err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                     (uint8_t*)&msg,
-+                                     sizeof(msg.msgId),
-+                                     (uint8_t*)&reply,
-+                                     &replyLength,
-+                                     NULL,
-+                                     NULL)) != E_OK)
-+        {
-+            REPORT_ERROR(MAJOR, err, NO_MSG);
-+            return 0;
-+        }
-+        if (replyLength != (sizeof(uint32_t) + sizeof(uint32_t)))
-+        {
-+            REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+            return 0;
-+        }
-+
-+        memcpy((uint8_t*)&timeStamp, reply.replyBody, sizeof(uint32_t));
-+        return timeStamp;
-+    }
-+    else if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+             p_Fm->baseAddr)
-+    {
-+        if (!(GET_UINT32(p_Fm->p_FmFpmRegs->fmfp_tsc1) & FPM_TS_CTL_EN))
-+        {
-+            REPORT_ERROR(MAJOR, E_INVALID_STATE, ("timestamp is not enabled!"));
-+            return 0;
-+        }
-+    }
-+    else if (p_Fm->guestId != NCSW_MASTER_ID)
-+        DBG(WARNING, ("No IPC - can't validate FM if timestamp enabled."));
-+
-+    return p_Fm->p_FmStateStruct->count1MicroBit;
-+}
-+
-+t_Error FmEnableRamsEcc(t_Handle h_Fm)
-+{
-+    t_Fm        *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+
-+    p_Fm->p_FmStateStruct->ramsEccOwners++;
-+    p_Fm->p_FmStateStruct->internalCall = TRUE;
-+
-+    return FM_EnableRamsEcc(p_Fm);
-+}
-+
-+t_Error FmDisableRamsEcc(t_Handle h_Fm)
-+{
-+    t_Fm        *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+
-+    ASSERT_COND(p_Fm->p_FmStateStruct->ramsEccOwners);
-+    p_Fm->p_FmStateStruct->ramsEccOwners--;
-+
-+    if (p_Fm->p_FmStateStruct->ramsEccOwners==0)
-+    {
-+        p_Fm->p_FmStateStruct->internalCall = TRUE;
-+        return FM_DisableRamsEcc(p_Fm);
-+    }
-+
-+    return E_OK;
-+}
-+
-+uint8_t FmGetGuestId(t_Handle h_Fm)
-+{
-+    t_Fm     *p_Fm = (t_Fm*)h_Fm;
-+
-+    return p_Fm->guestId;
-+}
-+
-+bool FmIsMaster(t_Handle h_Fm)
-+{
-+    t_Fm     *p_Fm = (t_Fm*)h_Fm;
-+
-+    return (p_Fm->guestId == NCSW_MASTER_ID);
-+}
-+
-+t_Error FmSetSizeOfFifo(t_Handle    h_Fm,
-+                        uint8_t     hardwarePortId,
-+                        uint32_t    *p_SizeOfFifo,
-+                        uint32_t    *p_ExtraSizeOfFifo,
-+                        bool        initialConfig)
-+{
-+    t_Fm                    *p_Fm = (t_Fm*)h_Fm;
-+    t_FmIpcPortRsrcParams   rsrcParams;
-+    t_Error                 err;
-+    struct fman_bmi_regs    *bmi_rg = p_Fm->p_FmBmiRegs;
-+    uint32_t                sizeOfFifo = *p_SizeOfFifo, extraSizeOfFifo = *p_ExtraSizeOfFifo;
-+    uint16_t                currentVal = 0, currentExtraVal = 0;
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        !p_Fm->baseAddr &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_FmIpcMsg          msg;
-+        t_FmIpcReply        reply;
-+        uint32_t            replyLength;
-+
-+        rsrcParams.hardwarePortId = hardwarePortId;
-+        rsrcParams.val = sizeOfFifo;
-+        rsrcParams.extra = extraSizeOfFifo;
-+        rsrcParams.boolInitialConfig = (uint8_t)initialConfig;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_SET_SIZE_OF_FIFO;
-+        memcpy(msg.msgBody, &rsrcParams, sizeof(rsrcParams));
-+        replyLength = sizeof(uint32_t);
-+        if ((err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                     (uint8_t*)&msg,
-+                                     sizeof(msg.msgId) + sizeof(rsrcParams),
-+                                     (uint8_t*)&reply,
-+                                     &replyLength,
-+                                     NULL,
-+                                     NULL)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        if (replyLength != sizeof(uint32_t))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+        return (t_Error)(reply.error);
-+    }
-+    else if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+             p_Fm->baseAddr)
-+    {
-+        DBG(WARNING, ("No IPC - can't validate FM total-fifo size."));
-+        fman_set_size_of_fifo(bmi_rg, hardwarePortId, sizeOfFifo, extraSizeOfFifo);
-+    }
-+    else if (p_Fm->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED,
-+                     ("running in guest-mode without neither IPC nor mapped register!"));
-+
-+    if (!initialConfig)
-+    {
-+        /* !initialConfig - runtime change of existing value.
-+         * - read the current FIFO and extra FIFO size */
-+        currentExtraVal = fman_get_size_of_extra_fifo(bmi_rg, hardwarePortId);
-+        currentVal = fman_get_size_of_fifo(bmi_rg, hardwarePortId);
-+    }
-+
-+    if (extraSizeOfFifo > currentExtraVal)
-+    {
-+        if (extraSizeOfFifo && !p_Fm->p_FmStateStruct->extraFifoPoolSize)
-+            /* if this is the first time a port requires extraFifoPoolSize, the total extraFifoPoolSize
-+             * must be initialized to 1 buffer per port
-+             */
-+            p_Fm->p_FmStateStruct->extraFifoPoolSize = FM_MAX_NUM_OF_RX_PORTS*BMI_FIFO_UNITS;
-+
-+        p_Fm->p_FmStateStruct->extraFifoPoolSize = MAX(p_Fm->p_FmStateStruct->extraFifoPoolSize, extraSizeOfFifo);
-+    }
-+
-+    /* check that there are enough uncommitted fifo size */
-+    if ((p_Fm->p_FmStateStruct->accumulatedFifoSize - currentVal + sizeOfFifo) >
-+        (p_Fm->p_FmStateStruct->totalFifoSize - p_Fm->p_FmStateStruct->extraFifoPoolSize)){
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE,
-+            ("Port request fifo size + accumulated size > total FIFO size:"));
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE,
-+            ("port 0x%x requested %d bytes, extra size = %d, accumulated size = %d total size = %d",
-+                hardwarePortId, sizeOfFifo, p_Fm->p_FmStateStruct->extraFifoPoolSize,
-+                p_Fm->p_FmStateStruct->accumulatedFifoSize,
-+                p_Fm->p_FmStateStruct->totalFifoSize));
-+    }
-+    else
-+    {
-+        /* update accumulated */
-+        ASSERT_COND(p_Fm->p_FmStateStruct->accumulatedFifoSize >= currentVal);
-+        p_Fm->p_FmStateStruct->accumulatedFifoSize -= currentVal;
-+        p_Fm->p_FmStateStruct->accumulatedFifoSize += sizeOfFifo;
-+        fman_set_size_of_fifo(bmi_rg, hardwarePortId, sizeOfFifo, extraSizeOfFifo);
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Error FmSetNumOfTasks(t_Handle    h_Fm,
-+                        uint8_t     hardwarePortId,
-+                        uint8_t     *p_NumOfTasks,
-+                        uint8_t     *p_NumOfExtraTasks,
-+                        bool        initialConfig)
-+{
-+    t_Fm                    *p_Fm = (t_Fm *)h_Fm;
-+    t_Error                 err;
-+    struct fman_bmi_regs    *bmi_rg = p_Fm->p_FmBmiRegs;
-+    uint8_t                 currentVal = 0, currentExtraVal = 0, numOfTasks = *p_NumOfTasks, numOfExtraTasks = *p_NumOfExtraTasks;
-+
-+    ASSERT_COND(IN_RANGE(1, hardwarePortId, 63));
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        !p_Fm->baseAddr &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_FmIpcPortRsrcParams   rsrcParams;
-+        t_FmIpcMsg              msg;
-+        t_FmIpcReply            reply;
-+        uint32_t                replyLength;
-+
-+        rsrcParams.hardwarePortId = hardwarePortId;
-+        rsrcParams.val = numOfTasks;
-+        rsrcParams.extra = numOfExtraTasks;
-+        rsrcParams.boolInitialConfig = (uint8_t)initialConfig;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_SET_NUM_OF_TASKS;
-+        memcpy(msg.msgBody, &rsrcParams, sizeof(rsrcParams));
-+        replyLength = sizeof(uint32_t);
-+        if ((err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                     (uint8_t*)&msg,
-+                                     sizeof(msg.msgId) + sizeof(rsrcParams),
-+                                     (uint8_t*)&reply,
-+                                     &replyLength,
-+                                     NULL,
-+                                     NULL)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        if (replyLength != sizeof(uint32_t))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+        return (t_Error)(reply.error);
-+    }
-+    else if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+             p_Fm->baseAddr)
-+    {
-+        DBG(WARNING, ("No IPC - can't validate FM total-num-of-tasks."));
-+        fman_set_num_of_tasks(bmi_rg, hardwarePortId, numOfTasks, numOfExtraTasks);
-+    }
-+    else if (p_Fm->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED,
-+                     ("running in guest-mode without neither IPC nor mapped register!"));
-+
-+    if (!initialConfig)
-+    {
-+        /* !initialConfig - runtime change of existing value.
-+         * - read the current number of tasks */
-+        currentVal = fman_get_num_of_tasks(bmi_rg, hardwarePortId);
-+        currentExtraVal = fman_get_num_extra_tasks(bmi_rg, hardwarePortId);
-+    }
-+
-+    if (numOfExtraTasks > currentExtraVal)
-+         p_Fm->p_FmStateStruct->extraTasksPoolSize =
-+             (uint8_t)MAX(p_Fm->p_FmStateStruct->extraTasksPoolSize, numOfExtraTasks);
-+
-+    /* check that there are enough uncommitted tasks */
-+    if ((p_Fm->p_FmStateStruct->accumulatedNumOfTasks - currentVal + numOfTasks) >
-+       (p_Fm->p_FmStateStruct->totalNumOfTasks - p_Fm->p_FmStateStruct->extraTasksPoolSize))
-+        RETURN_ERROR(MAJOR, E_NOT_AVAILABLE,
-+                     ("Requested numOfTasks and extra tasks pool for fm%d exceed total numOfTasks.",
-+                      p_Fm->p_FmStateStruct->fmId));
-+    else
-+    {
-+        ASSERT_COND(p_Fm->p_FmStateStruct->accumulatedNumOfTasks >= currentVal);
-+        /* update accumulated */
-+        p_Fm->p_FmStateStruct->accumulatedNumOfTasks -= currentVal;
-+        p_Fm->p_FmStateStruct->accumulatedNumOfTasks += numOfTasks;
-+        fman_set_num_of_tasks(bmi_rg, hardwarePortId, numOfTasks, numOfExtraTasks);
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Error FmSetNumOfOpenDmas(t_Handle h_Fm,
-+                           uint8_t hardwarePortId,
-+                           uint8_t *p_NumOfOpenDmas,
-+                           uint8_t *p_NumOfExtraOpenDmas,
-+                           bool    initialConfig)
-+
-+{
-+    t_Fm                    *p_Fm = (t_Fm *)h_Fm;
-+    t_Error                 err;
-+    struct fman_bmi_regs    *bmi_rg = p_Fm->p_FmBmiRegs;
-+    uint8_t                 numOfOpenDmas = *p_NumOfOpenDmas, numOfExtraOpenDmas = *p_NumOfExtraOpenDmas;
-+    uint8_t                 totalNumDmas = 0, currentVal = 0, currentExtraVal = 0;
-+
-+    ASSERT_COND(IN_RANGE(1, hardwarePortId, 63));
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        !p_Fm->baseAddr &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_FmIpcPortRsrcParams   rsrcParams;
-+        t_FmIpcMsg              msg;
-+        t_FmIpcReply            reply;
-+        uint32_t                replyLength;
-+
-+        rsrcParams.hardwarePortId = hardwarePortId;
-+        rsrcParams.val = numOfOpenDmas;
-+        rsrcParams.extra = numOfExtraOpenDmas;
-+        rsrcParams.boolInitialConfig = (uint8_t)initialConfig;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_SET_NUM_OF_OPEN_DMAS;
-+        memcpy(msg.msgBody, &rsrcParams, sizeof(rsrcParams));
-+        replyLength = sizeof(uint32_t);
-+        if ((err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                     (uint8_t*)&msg,
-+                                     sizeof(msg.msgId) + sizeof(rsrcParams),
-+                                     (uint8_t*)&reply,
-+                                     &replyLength,
-+                                     NULL,
-+                                     NULL)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        if (replyLength != sizeof(uint32_t))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+        return (t_Error)(reply.error);
-+    }
-+#ifdef FM_HAS_TOTAL_DMAS
-+    else if (p_Fm->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("running in guest-mode without IPC!"));
-+#else
-+    else if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+             p_Fm->baseAddr &&
-+             (p_Fm->p_FmStateStruct->revInfo.majorRev >= 6))
-+    {
-+        /*DBG(WARNING, ("No IPC - can't validate FM total-num-of-dmas."));*/
-+
-+        if (!numOfOpenDmas)
-+        {
-+             /* first config without explic it value: Do Nothing - reset value shouldn't be
-+                changed, read register for port save */
-+                *p_NumOfOpenDmas = fman_get_num_of_dmas(bmi_rg, hardwarePortId);
-+                *p_NumOfExtraOpenDmas = fman_get_num_extra_dmas(bmi_rg, hardwarePortId);
-+        }
-+        else
-+            /* whether it is the first time with explicit value, or runtime "set" - write register */
-+            fman_set_num_of_open_dmas(bmi_rg,
-+                                   hardwarePortId,
-+                                   numOfOpenDmas,
-+                                   numOfExtraOpenDmas,
-+                                   p_Fm->p_FmStateStruct->accumulatedNumOfOpenDmas + p_Fm->p_FmStateStruct->extraOpenDmasPoolSize);
-+    }
-+    else if (p_Fm->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MAJOR, E_NOT_SUPPORTED,
-+                     ("running in guest-mode without neither IPC nor mapped register!"));
-+#endif /* FM_HAS_TOTAL_DMAS */
-+
-+    if (!initialConfig)
-+    {
-+        /* !initialConfig - runtime change of existing value.
-+         * - read the current number of open Dma's */
-+        currentExtraVal = fman_get_num_extra_dmas(bmi_rg, hardwarePortId);
-+        currentVal = fman_get_num_of_dmas(bmi_rg, hardwarePortId);
-+    }
-+
-+#ifdef FM_NO_GUARANTEED_RESET_VALUES
-+    /* it's illegal to be in a state where this is not the first set and no value is specified */
-+    ASSERT_COND(initialConfig || numOfOpenDmas);
-+    if (!numOfOpenDmas)
-+    {
-+        /* !numOfOpenDmas - first configuration according to values in regs.
-+         * - read the current number of open Dma's */
-+        currentExtraVal = fman_get_num_extra_dmas(bmi_rg, hardwarePortId);
-+        currentVal = fman_get_num_of_dmas(bmi_rg, hardwarePortId);
-+        /* This is the first configuration and user did not specify value (!numOfOpenDmas),
-+         * reset values will be used and we just save these values for resource management */
-+        p_Fm->p_FmStateStruct->extraOpenDmasPoolSize =
-+                    (uint8_t)MAX(p_Fm->p_FmStateStruct->extraOpenDmasPoolSize, currentExtraVal);
-+        p_Fm->p_FmStateStruct->accumulatedNumOfOpenDmas += currentVal;
-+        *p_NumOfOpenDmas = currentVal;
-+        *p_NumOfExtraOpenDmas = currentExtraVal;
-+        return E_OK;
-+    }
-+#endif /* FM_NO_GUARANTEED_RESET_VALUES */
-+
-+        if (numOfExtraOpenDmas > currentExtraVal)
-+             p_Fm->p_FmStateStruct->extraOpenDmasPoolSize =
-+                 (uint8_t)MAX(p_Fm->p_FmStateStruct->extraOpenDmasPoolSize, numOfExtraOpenDmas);
-+
-+#ifdef FM_HAS_TOTAL_DMAS
-+        if ((p_Fm->p_FmStateStruct->revInfo.majorRev < 6) &&
-+            (p_Fm->p_FmStateStruct->accumulatedNumOfOpenDmas - currentVal + numOfOpenDmas >
-+                p_Fm->p_FmStateStruct->maxNumOfOpenDmas))
-+                RETURN_ERROR(MAJOR, E_NOT_AVAILABLE,
-+                             ("Requested numOfOpenDmas for fm%d exceeds total numOfOpenDmas.",
-+                             p_Fm->p_FmStateStruct->fmId));
-+#else
-+        if ((p_Fm->p_FmStateStruct->revInfo.majorRev >= 6) &&
-+#ifdef FM_HEAVY_TRAFFIC_SEQUENCER_HANG_ERRATA_FMAN_A006981
-+            !((p_Fm->p_FmStateStruct->revInfo.majorRev == 6) &&
-+              (p_Fm->p_FmStateStruct->revInfo.minorRev == 0)) &&
-+#endif /* FM_HEAVY_TRAFFIC_SEQUENCER_HANG_ERRATA_FMAN_A006981 */
-+            (p_Fm->p_FmStateStruct->accumulatedNumOfOpenDmas - currentVal + numOfOpenDmas > DMA_THRESH_MAX_COMMQ + 1))
-+            RETURN_ERROR(MAJOR, E_NOT_AVAILABLE,
-+                         ("Requested numOfOpenDmas for fm%d exceeds DMA Command queue (%d)",
-+                          p_Fm->p_FmStateStruct->fmId, DMA_THRESH_MAX_COMMQ+1));
-+#endif /* FM_HAS_TOTAL_DMAS */
-+        else
-+        {
-+            ASSERT_COND(p_Fm->p_FmStateStruct->accumulatedNumOfOpenDmas >= currentVal);
-+            /* update acummulated */
-+            p_Fm->p_FmStateStruct->accumulatedNumOfOpenDmas -= currentVal;
-+            p_Fm->p_FmStateStruct->accumulatedNumOfOpenDmas += numOfOpenDmas;
-+
-+#ifdef FM_HAS_TOTAL_DMAS
-+            if (p_Fm->p_FmStateStruct->revInfo.majorRev < 6)
-+            totalNumDmas = (uint8_t)(p_Fm->p_FmStateStruct->accumulatedNumOfOpenDmas + p_Fm->p_FmStateStruct->extraOpenDmasPoolSize);
-+#endif /* FM_HAS_TOTAL_DMAS */
-+            fman_set_num_of_open_dmas(bmi_rg,
-+                               hardwarePortId,
-+                               numOfOpenDmas,
-+                               numOfExtraOpenDmas,
-+                               totalNumDmas);
-+        }
-+
-+    return E_OK;
-+}
-+
-+#if (DPAA_VERSION >= 11)
-+t_Error FmVSPCheckRelativeProfile(t_Handle        h_Fm,
-+                                  e_FmPortType    portType,
-+                                  uint8_t         portId,
-+                                  uint16_t        relativeProfile)
-+{
-+    t_Fm         *p_Fm;
-+    t_FmSp      *p_FmPcdSp;
-+    uint8_t     swPortIndex=0, hardwarePortId;
-+
-+    ASSERT_COND(h_Fm);
-+    p_Fm = (t_Fm*)h_Fm;
-+
-+    hardwarePortId = SwPortIdToHwPortId(portType,
-+                                    portId,
-+                                    p_Fm->p_FmStateStruct->revInfo.majorRev,
-+                                    p_Fm->p_FmStateStruct->revInfo.minorRev);
-+    ASSERT_COND(hardwarePortId);
-+    HW_PORT_ID_TO_SW_PORT_INDX(swPortIndex, hardwarePortId);
-+
-+    p_FmPcdSp = p_Fm->p_FmSp;
-+    ASSERT_COND(p_FmPcdSp);
-+
-+    if (!p_FmPcdSp->portsMapping[swPortIndex].numOfProfiles)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE , ("Port has no allocated profiles"));
-+    if (relativeProfile >= p_FmPcdSp->portsMapping[swPortIndex].numOfProfiles)
-+        RETURN_ERROR(MAJOR, E_NOT_IN_RANGE , ("Profile id is out of range"));
-+
-+    return E_OK;
-+}
-+
-+t_Error FmVSPGetAbsoluteProfileId(t_Handle        h_Fm,
-+                                  e_FmPortType    portType,
-+                                  uint8_t         portId,
-+                                  uint16_t        relativeProfile,
-+                                  uint16_t        *p_AbsoluteId)
-+{
-+    t_Fm         *p_Fm;
-+    t_FmSp      *p_FmPcdSp;
-+    uint8_t     swPortIndex=0, hardwarePortId;
-+    t_Error     err;
-+
-+    ASSERT_COND(h_Fm);
-+    p_Fm = (t_Fm*)h_Fm;
-+
-+    err = FmVSPCheckRelativeProfile(h_Fm, portType, portId, relativeProfile);
-+    if (err != E_OK)
-+        return err;
-+
-+    hardwarePortId = SwPortIdToHwPortId(portType,
-+                                    portId,
-+                                    p_Fm->p_FmStateStruct->revInfo.majorRev,
-+                                    p_Fm->p_FmStateStruct->revInfo.minorRev);
-+    ASSERT_COND(hardwarePortId);
-+    HW_PORT_ID_TO_SW_PORT_INDX(swPortIndex, hardwarePortId);
-+
-+    p_FmPcdSp = p_Fm->p_FmSp;
-+    ASSERT_COND(p_FmPcdSp);
-+
-+    *p_AbsoluteId = (uint16_t)(p_FmPcdSp->portsMapping[swPortIndex].profilesBase + relativeProfile);
-+
-+    return E_OK;
-+}
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+static t_Error InitFmDma(t_Fm *p_Fm)
-+{
-+    t_Error err;
-+
-+    err = (t_Error)fman_dma_init(p_Fm->p_FmDmaRegs, p_Fm->p_FmDriverParam);
-+    if (err != E_OK)
-+        return err;
-+
-+    /* Allocate MURAM for CAM */
-+    p_Fm->camBaseAddr = PTR_TO_UINT(FM_MURAM_AllocMem(p_Fm->h_FmMuram,
-+                                                      (uint32_t)(p_Fm->p_FmDriverParam->dma_cam_num_of_entries*DMA_CAM_SIZEOF_ENTRY),
-+                                                      DMA_CAM_ALIGN));
-+    if (!p_Fm->camBaseAddr)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MURAM alloc for DMA CAM failed"));
-+
-+    WRITE_BLOCK(UINT_TO_PTR(p_Fm->camBaseAddr),
-+                0,
-+                (uint32_t)(p_Fm->p_FmDriverParam->dma_cam_num_of_entries*DMA_CAM_SIZEOF_ENTRY));
-+
-+    if (p_Fm->p_FmStateStruct->revInfo.majorRev == 2)
-+    {
-+        FM_MURAM_FreeMem(p_Fm->h_FmMuram, UINT_TO_PTR(p_Fm->camBaseAddr));
-+
-+        p_Fm->camBaseAddr = PTR_TO_UINT(FM_MURAM_AllocMem(p_Fm->h_FmMuram,
-+                                                          (uint32_t)(p_Fm->p_FmDriverParam->dma_cam_num_of_entries*72 + 128),
-+                                                          64));
-+        if (!p_Fm->camBaseAddr)
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MURAM alloc for DMA CAM failed"));
-+
-+        WRITE_BLOCK(UINT_TO_PTR(p_Fm->camBaseAddr),
-+                   0,
-+               (uint32_t)(p_Fm->p_FmDriverParam->dma_cam_num_of_entries*72 + 128));
-+
-+        switch(p_Fm->p_FmDriverParam->dma_cam_num_of_entries)
-+        {
-+            case (8):
-+                WRITE_UINT32(*(uint32_t*)p_Fm->camBaseAddr, 0xff000000);
-+                break;
-+            case (16):
-+                WRITE_UINT32(*(uint32_t*)p_Fm->camBaseAddr, 0xffff0000);
-+                break;
-+            case (24):
-+                WRITE_UINT32(*(uint32_t*)p_Fm->camBaseAddr, 0xffffff00);
-+                break;
-+            case (32):
-+                WRITE_UINT32(*(uint32_t*)p_Fm->camBaseAddr, 0xffffffff);
-+                break;
-+            default:
-+                RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("wrong dma_cam_num_of_entries"));
-+        }
-+    }
-+
-+    p_Fm->p_FmDriverParam->cam_base_addr =
-+                 (uint32_t)(XX_VirtToPhys(UINT_TO_PTR(p_Fm->camBaseAddr)) - p_Fm->fmMuramPhysBaseAddr);
-+
-+    return E_OK;
-+}
-+
-+static t_Error InitFmFpm(t_Fm *p_Fm)
-+{
-+    return (t_Error)fman_fpm_init(p_Fm->p_FmFpmRegs, p_Fm->p_FmDriverParam);
-+}
-+
-+static t_Error InitFmBmi(t_Fm *p_Fm)
-+{
-+    return (t_Error)fman_bmi_init(p_Fm->p_FmBmiRegs, p_Fm->p_FmDriverParam);
-+}
-+
-+static t_Error InitFmQmi(t_Fm *p_Fm)
-+{
-+    return (t_Error)fman_qmi_init(p_Fm->p_FmQmiRegs, p_Fm->p_FmDriverParam);
-+}
-+
-+static t_Error InitGuestMode(t_Fm *p_Fm)
-+{
-+    t_Error                 err = E_OK;
-+    int                     i;
-+    t_FmIpcMsg              msg;
-+    t_FmIpcReply            reply;
-+    uint32_t                replyLength;
-+
-+    ASSERT_COND(p_Fm);
-+    ASSERT_COND(p_Fm->guestId != NCSW_MASTER_ID);
-+
-+    /* build the FM guest partition IPC address */
-+    if (Sprint (p_Fm->fmModuleName, "FM_%d_%d",p_Fm->p_FmStateStruct->fmId, p_Fm->guestId) != (p_Fm->guestId<10 ? 6:7))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Sprint failed"));
-+
-+    /* build the FM master partition IPC address */
-+    memset(p_Fm->fmIpcHandlerModuleName, 0, (sizeof(char)) * MODULE_NAME_SIZE);
-+    if (Sprint (p_Fm->fmIpcHandlerModuleName[0], "FM_%d_%d",p_Fm->p_FmStateStruct->fmId, NCSW_MASTER_ID) != 6)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Sprint failed"));
-+
-+    for (i=0;i<e_FM_EV_DUMMY_LAST;i++)
-+        p_Fm->intrMng[i].f_Isr = UnimplementedIsr;
-+
-+    p_Fm->h_IpcSessions[0] = XX_IpcInitSession(p_Fm->fmIpcHandlerModuleName[0], p_Fm->fmModuleName);
-+    if (p_Fm->h_IpcSessions[0])
-+    {
-+        uint8_t                 isMasterAlive;
-+        t_FmIpcParams           ipcParams;
-+
-+        err = XX_IpcRegisterMsgHandler(p_Fm->fmModuleName, FmGuestHandleIpcMsgCB, p_Fm, FM_IPC_MAX_REPLY_SIZE);
-+        if (err)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_MASTER_IS_ALIVE;
-+        msg.msgBody[0] = p_Fm->guestId;
-+        replyLength = sizeof(uint32_t) + sizeof(uint8_t);
-+        do
-+        {
-+            blockingFlag = TRUE;
-+            if ((err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                         (uint8_t*)&msg,
-+                                         sizeof(msg.msgId)+sizeof(p_Fm->guestId),
-+                                         (uint8_t*)&reply,
-+                                         &replyLength,
-+                                         IpcMsgCompletionCB,
-+                                         p_Fm)) != E_OK)
-+                REPORT_ERROR(MINOR, err, NO_MSG);
-+            while (blockingFlag) ;
-+            if (replyLength != (sizeof(uint32_t) + sizeof(uint8_t)))
-+                REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+            isMasterAlive = *(uint8_t*)(reply.replyBody);
-+        } while (!isMasterAlive);
-+
-+        /* read FM parameters and save */
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_GET_PARAMS;
-+        replyLength = sizeof(uint32_t) + sizeof(t_FmIpcParams);
-+        if ((err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                     (uint8_t*)&msg,
-+                                     sizeof(msg.msgId),
-+                                     (uint8_t*)&reply,
-+                                     &replyLength,
-+                                     NULL,
-+                                     NULL)) != E_OK)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+        if (replyLength != (sizeof(uint32_t) + sizeof(t_FmIpcParams)))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+        memcpy((uint8_t*)&ipcParams, reply.replyBody, sizeof(t_FmIpcParams));
-+
-+        p_Fm->p_FmStateStruct->fmClkFreq = ipcParams.fmClkFreq;
-+        p_Fm->p_FmStateStruct->fmMacClkFreq = ipcParams.fmMacClkFreq;
-+        p_Fm->p_FmStateStruct->revInfo.majorRev = ipcParams.majorRev;
-+        p_Fm->p_FmStateStruct->revInfo.minorRev = ipcParams.minorRev;
-+    }
-+    else
-+    {
-+        DBG(WARNING, ("FM Guest mode - without IPC"));
-+        if (!p_Fm->p_FmStateStruct->fmClkFreq)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("No fmClkFreq configured for guest without IPC"));
-+        if (p_Fm->baseAddr)
-+        {
-+            fman_get_revision(p_Fm->p_FmFpmRegs,
-+                              &p_Fm->p_FmStateStruct->revInfo.majorRev,
-+                              &p_Fm->p_FmStateStruct->revInfo.minorRev);
-+
-+        }
-+    }
-+
-+#if (DPAA_VERSION >= 11)
-+    p_Fm->partVSPBase = AllocVSPsForPartition(p_Fm, p_Fm->partVSPBase, p_Fm->partNumOfVSPs, p_Fm->guestId);
-+    if (p_Fm->partVSPBase == (uint8_t)(ILLEGAL_BASE))
-+        DBG(WARNING, ("partition VSPs allocation is FAILED"));
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    /* General FM driver initialization */
-+    if (p_Fm->baseAddr)
-+        p_Fm->fmMuramPhysBaseAddr =
-+            (uint64_t)(XX_VirtToPhys(UINT_TO_PTR(p_Fm->baseAddr + FM_MM_MURAM)));
-+
-+    XX_Free(p_Fm->p_FmDriverParam);
-+    p_Fm->p_FmDriverParam = NULL;
-+
-+    if ((p_Fm->guestId == NCSW_MASTER_ID) ||
-+        (p_Fm->h_IpcSessions[0]))
-+    {
-+        FM_DisableRamsEcc(p_Fm);
-+        FmMuramClear(p_Fm->h_FmMuram);
-+        FM_EnableRamsEcc(p_Fm);
-+    }
-+
-+    return E_OK;
-+}
-+
-+static __inline__ enum fman_exceptions FmanExceptionTrans(e_FmExceptions exception)
-+{
-+    switch (exception) {
-+            case  e_FM_EX_DMA_BUS_ERROR:
-+                return E_FMAN_EX_DMA_BUS_ERROR;
-+            case  e_FM_EX_DMA_READ_ECC:
-+                return E_FMAN_EX_DMA_READ_ECC;
-+            case  e_FM_EX_DMA_SYSTEM_WRITE_ECC:
-+                return E_FMAN_EX_DMA_SYSTEM_WRITE_ECC;
-+            case  e_FM_EX_DMA_FM_WRITE_ECC:
-+                return E_FMAN_EX_DMA_FM_WRITE_ECC;
-+            case  e_FM_EX_FPM_STALL_ON_TASKS:
-+                return E_FMAN_EX_FPM_STALL_ON_TASKS;
-+            case  e_FM_EX_FPM_SINGLE_ECC:
-+                return E_FMAN_EX_FPM_SINGLE_ECC;
-+            case  e_FM_EX_FPM_DOUBLE_ECC:
-+                return E_FMAN_EX_FPM_DOUBLE_ECC;
-+            case  e_FM_EX_QMI_SINGLE_ECC:
-+                return E_FMAN_EX_QMI_SINGLE_ECC;
-+            case  e_FM_EX_QMI_DOUBLE_ECC:
-+                return E_FMAN_EX_QMI_DOUBLE_ECC;
-+            case  e_FM_EX_QMI_DEQ_FROM_UNKNOWN_PORTID:
-+                return E_FMAN_EX_QMI_DEQ_FROM_UNKNOWN_PORTID;
-+            case  e_FM_EX_BMI_LIST_RAM_ECC:
-+                return E_FMAN_EX_BMI_LIST_RAM_ECC;
-+            case  e_FM_EX_BMI_STORAGE_PROFILE_ECC:
-+                return E_FMAN_EX_BMI_STORAGE_PROFILE_ECC;
-+            case  e_FM_EX_BMI_STATISTICS_RAM_ECC:
-+                return E_FMAN_EX_BMI_STATISTICS_RAM_ECC;
-+            case  e_FM_EX_BMI_DISPATCH_RAM_ECC:
-+                return E_FMAN_EX_BMI_DISPATCH_RAM_ECC;
-+            case  e_FM_EX_IRAM_ECC:
-+                return E_FMAN_EX_IRAM_ECC;
-+            case  e_FM_EX_MURAM_ECC:
-+                return E_FMAN_EX_MURAM_ECC;
-+            default:
-+                return E_FMAN_EX_DMA_BUS_ERROR;
-+        }
-+}
-+
-+uint8_t SwPortIdToHwPortId(e_FmPortType type, uint8_t relativePortId, uint8_t majorRev, uint8_t minorRev)
-+{
-+	switch (type)
-+	{
-+		case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+		case (e_FM_PORT_TYPE_OH_HOST_COMMAND):
-+			CHECK_PORT_ID_OH_PORTS(relativePortId);
-+			return (uint8_t)(BASE_OH_PORTID + (relativePortId));
-+		case (e_FM_PORT_TYPE_RX):
-+			CHECK_PORT_ID_1G_RX_PORTS(relativePortId);
-+			return (uint8_t)(BASE_1G_RX_PORTID + (relativePortId));
-+		case (e_FM_PORT_TYPE_RX_10G):
-+                       /* The 10G port in T1024 (FMan Version 6.4) is the first port.
-+                        * This is the reason why the 1G port offset is used.
-+                        */
-+                       if (majorRev == 6 && minorRev == 4)
-+                       {
-+                               CHECK_PORT_ID_1G_RX_PORTS(relativePortId);
-+                               return (uint8_t)(BASE_1G_RX_PORTID + (relativePortId));
-+                       }
-+                       else
-+                       {
-+                               CHECK_PORT_ID_10G_RX_PORTS(relativePortId);
-+                               return (uint8_t)(BASE_10G_RX_PORTID + (relativePortId));
-+                       }
-+		case (e_FM_PORT_TYPE_TX):
-+			CHECK_PORT_ID_1G_TX_PORTS(relativePortId);
-+			return (uint8_t)(BASE_1G_TX_PORTID + (relativePortId));
-+		case (e_FM_PORT_TYPE_TX_10G):
-+                       /* The 10G port in T1024 (FMan Version 6.4) is the first port.
-+                        * This is the reason why the 1G port offset is used.
-+                        */
-+                       if (majorRev == 6 && minorRev == 4)
-+                       {
-+                               CHECK_PORT_ID_1G_TX_PORTS(relativePortId);
-+                               return (uint8_t)(BASE_1G_TX_PORTID + (relativePortId));
-+                       }
-+                       else
-+                       {
-+                               CHECK_PORT_ID_10G_TX_PORTS(relativePortId);
-+                               return (uint8_t)(BASE_10G_TX_PORTID + (relativePortId));
-+                       }
-+		default:
-+			REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal port type"));
-+			return 0;
-+	}
-+}
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+t_Error FmDumpPortRegs (t_Handle h_Fm, uint8_t hardwarePortId)
-+{
-+    t_Fm            *p_Fm = (t_Fm *)h_Fm;
-+
-+    DECLARE_DUMP;
-+
-+    ASSERT_COND(IN_RANGE(1, hardwarePortId, 63));
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(((p_Fm->guestId == NCSW_MASTER_ID) ||
-+                               p_Fm->baseAddr), E_INVALID_OPERATION);
-+
-+    DUMP_TITLE(&p_Fm->p_FmBmiRegs->fmbm_pp[hardwarePortId-1], ("fmbm_pp for port %u", (hardwarePortId)));
-+    DUMP_MEMORY(&p_Fm->p_FmBmiRegs->fmbm_pp[hardwarePortId-1], sizeof(uint32_t));
-+
-+    DUMP_TITLE(&p_Fm->p_FmBmiRegs->fmbm_pfs[hardwarePortId-1], ("fmbm_pfs for port %u", (hardwarePortId )));
-+    DUMP_MEMORY(&p_Fm->p_FmBmiRegs->fmbm_pfs[hardwarePortId-1], sizeof(uint32_t));
-+
-+    DUMP_TITLE(&p_Fm->p_FmBmiRegs->fmbm_spliodn[hardwarePortId-1], ("fmbm_spliodn for port %u", (hardwarePortId)));
-+    DUMP_MEMORY(&p_Fm->p_FmBmiRegs->fmbm_spliodn[hardwarePortId-1], sizeof(uint32_t));
-+
-+    DUMP_TITLE(&p_Fm->p_FmFpmRegs->fmfp_ps[hardwarePortId], ("fmfp_ps for port %u", (hardwarePortId)));
-+    DUMP_MEMORY(&p_Fm->p_FmFpmRegs->fmfp_ps[hardwarePortId], sizeof(uint32_t));
-+
-+    DUMP_TITLE(&p_Fm->p_FmDmaRegs->fmdmplr[hardwarePortId/2], ("fmdmplr for port %u", (hardwarePortId)));
-+    DUMP_MEMORY(&p_Fm->p_FmDmaRegs->fmdmplr[hardwarePortId/2], sizeof(uint32_t));
-+
-+    return E_OK;
-+}
-+#endif /* (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)) */
-+
-+
-+/*****************************************************************************/
-+/*                      API Init unit functions                              */
-+/*****************************************************************************/
-+t_Handle FM_Config(t_FmParams *p_FmParam)
-+{
-+    t_Fm                *p_Fm;
-+    uint8_t             i;
-+    uintptr_t           baseAddr;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_FmParam, E_NULL_POINTER, NULL);
-+    SANITY_CHECK_RETURN_VALUE(((p_FmParam->firmware.p_Code && p_FmParam->firmware.size) ||
-+                               (!p_FmParam->firmware.p_Code && !p_FmParam->firmware.size)),
-+                              E_INVALID_VALUE, NULL);
-+
-+    baseAddr = p_FmParam->baseAddr;
-+
-+    /* Allocate FM structure */
-+    p_Fm = (t_Fm *) XX_Malloc(sizeof(t_Fm));
-+    if (!p_Fm)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM driver structure"));
-+        return NULL;
-+    }
-+    memset(p_Fm, 0, sizeof(t_Fm));
-+
-+    p_Fm->p_FmStateStruct = (t_FmStateStruct *) XX_Malloc(sizeof(t_FmStateStruct));
-+    if (!p_Fm->p_FmStateStruct)
-+    {
-+        XX_Free(p_Fm);
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM Status structure"));
-+        return NULL;
-+    }
-+    memset(p_Fm->p_FmStateStruct, 0, sizeof(t_FmStateStruct));
-+
-+    /* Initialize FM parameters which will be kept by the driver */
-+    p_Fm->p_FmStateStruct->fmId = p_FmParam->fmId;
-+    p_Fm->guestId               = p_FmParam->guestId;
-+
-+    for (i=0; i<FM_MAX_NUM_OF_HW_PORT_IDS; i++)
-+        p_Fm->p_FmStateStruct->portsTypes[i] = e_FM_PORT_TYPE_DUMMY;
-+
-+    /* Allocate the FM driver's parameters structure */
-+    p_Fm->p_FmDriverParam = (struct fman_cfg *)XX_Malloc(sizeof(struct fman_cfg));
-+    if (!p_Fm->p_FmDriverParam)
-+    {
-+        XX_Free(p_Fm->p_FmStateStruct);
-+        XX_Free(p_Fm);
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM driver parameters"));
-+        return NULL;
-+    }
-+    memset(p_Fm->p_FmDriverParam, 0, sizeof(struct fman_cfg));
-+
-+#if (DPAA_VERSION >= 11)
-+    p_Fm->p_FmSp = (t_FmSp *)XX_Malloc(sizeof(t_FmSp));
-+    if (!p_Fm->p_FmSp)
-+    {
-+        XX_Free(p_Fm->p_FmDriverParam);
-+        XX_Free(p_Fm->p_FmStateStruct);
-+        XX_Free(p_Fm);
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("allocation for internal data structure failed"));
-+        return NULL;
-+    }
-+    memset(p_Fm->p_FmSp, 0, sizeof(t_FmSp));
-+
-+    for (i=0; i<FM_VSP_MAX_NUM_OF_ENTRIES; i++)
-+        p_Fm->p_FmSp->profiles[i].profilesMng.ownerId = (uint8_t)ILLEGAL_BASE;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    /* Initialize FM parameters which will be kept by the driver */
-+    p_Fm->p_FmStateStruct->fmId                 = p_FmParam->fmId;
-+    p_Fm->h_FmMuram                             = p_FmParam->h_FmMuram;
-+    p_Fm->h_App                                 = p_FmParam->h_App;
-+    p_Fm->p_FmStateStruct->fmClkFreq            = p_FmParam->fmClkFreq;
-+    p_Fm->p_FmStateStruct->fmMacClkFreq         = p_FmParam->fmClkFreq / ((!p_FmParam->fmMacClkRatio)? 2: p_FmParam->fmMacClkRatio);
-+    p_Fm->f_Exception                           = p_FmParam->f_Exception;
-+    p_Fm->f_BusError                            = p_FmParam->f_BusError;
-+    p_Fm->p_FmFpmRegs = (struct fman_fpm_regs *)UINT_TO_PTR(baseAddr + FM_MM_FPM);
-+    p_Fm->p_FmBmiRegs = (struct fman_bmi_regs *)UINT_TO_PTR(baseAddr + FM_MM_BMI);
-+    p_Fm->p_FmQmiRegs = (struct fman_qmi_regs *)UINT_TO_PTR(baseAddr + FM_MM_QMI);
-+    p_Fm->p_FmDmaRegs = (struct fman_dma_regs *)UINT_TO_PTR(baseAddr + FM_MM_DMA);
-+    p_Fm->p_FmRegs       = (struct fman_regs *)UINT_TO_PTR(baseAddr + FM_MM_BMI);
-+    p_Fm->baseAddr                              = baseAddr;
-+    p_Fm->p_FmStateStruct->irq                  = p_FmParam->irq;
-+    p_Fm->p_FmStateStruct->errIrq               = p_FmParam->errIrq;
-+    p_Fm->hcPortInitialized                     = FALSE;
-+    p_Fm->independentMode                       = FALSE;
-+
-+    p_Fm->h_Spinlock = XX_InitSpinlock();
-+    if (!p_Fm->h_Spinlock)
-+    {
-+        XX_Free(p_Fm->p_FmDriverParam);
-+        XX_Free(p_Fm->p_FmStateStruct);
-+        XX_Free(p_Fm);
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("can't allocate spinlock!"));
-+        return NULL;
-+    }
-+
-+#if (DPAA_VERSION >= 11)
-+    p_Fm->partVSPBase   = p_FmParam->partVSPBase;
-+    p_Fm->partNumOfVSPs = p_FmParam->partNumOfVSPs;
-+    p_Fm->vspBaseAddr = p_FmParam->vspBaseAddr;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    fman_defconfig(p_Fm->p_FmDriverParam,
-+                  !!(p_Fm->guestId == NCSW_MASTER_ID));
-+/* overide macros dependent parameters */
-+#ifdef FM_PEDANTIC_DMA
-+    p_Fm->p_FmDriverParam->pedantic_dma = TRUE;
-+    p_Fm->p_FmDriverParam->dma_aid_override = TRUE;
-+#endif /* FM_PEDANTIC_DMA */
-+#ifndef FM_QMI_NO_DEQ_OPTIONS_SUPPORT
-+    p_Fm->p_FmDriverParam->qmi_deq_option_support = TRUE;
-+#endif /* !FM_QMI_NO_DEQ_OPTIONS_SUPPORT */
-+
-+    p_Fm->p_FmStateStruct->ramsEccEnable        = FALSE;
-+    p_Fm->p_FmStateStruct->extraFifoPoolSize    = 0;
-+    p_Fm->p_FmStateStruct->exceptions           = DEFAULT_exceptions;
-+    p_Fm->resetOnInit                          = DEFAULT_resetOnInit;
-+    p_Fm->f_ResetOnInitOverride                = DEFAULT_resetOnInitOverrideCallback;
-+    p_Fm->fwVerify                             = DEFAULT_VerifyUcode;
-+    p_Fm->firmware.size                        = p_FmParam->firmware.size;
-+    if (p_Fm->firmware.size)
-+    {
-+        p_Fm->firmware.p_Code = (uint32_t *)XX_Malloc(p_Fm->firmware.size);
-+        if (!p_Fm->firmware.p_Code)
-+        {
-+            XX_FreeSpinlock(p_Fm->h_Spinlock);
-+            XX_Free(p_Fm->p_FmStateStruct);
-+            XX_Free(p_Fm->p_FmDriverParam);
-+            XX_Free(p_Fm);
-+            REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM firmware code"));
-+            return NULL;
-+        }
-+        memcpy(p_Fm->firmware.p_Code, p_FmParam->firmware.p_Code ,p_Fm->firmware.size);
-+    }
-+
-+    if (p_Fm->guestId != NCSW_MASTER_ID)
-+        return p_Fm;
-+
-+    /* read revision */
-+    /* Chip dependent, will be configured in Init */
-+    fman_get_revision(p_Fm->p_FmFpmRegs,
-+                      &p_Fm->p_FmStateStruct->revInfo.majorRev,
-+                      &p_Fm->p_FmStateStruct->revInfo.minorRev);
-+
-+#ifdef FM_AID_MODE_NO_TNUM_SW005
-+    if (p_Fm->p_FmStateStruct->revInfo.majorRev >= 6)
-+        p_Fm->p_FmDriverParam->dma_aid_mode = e_FM_DMA_AID_OUT_PORT_ID;
-+#endif /* FM_AID_MODE_NO_TNUM_SW005 */
-+#ifndef FM_QMI_NO_DEQ_OPTIONS_SUPPORT
-+   if (p_Fm->p_FmStateStruct->revInfo.majorRev != 4)
-+        p_Fm->p_FmDriverParam->qmi_def_tnums_thresh = QMI_DEF_TNUMS_THRESH;
-+#endif /* FM_QMI_NO_DEQ_OPTIONS_SUPPORT */
-+
-+        p_Fm->p_FmStateStruct->totalFifoSize        = 0;
-+        p_Fm->p_FmStateStruct->totalNumOfTasks      = 
-+            DEFAULT_totalNumOfTasks(p_Fm->p_FmStateStruct->revInfo.majorRev,
-+                                    p_Fm->p_FmStateStruct->revInfo.minorRev);
-+
-+#ifdef FM_HAS_TOTAL_DMAS
-+        p_Fm->p_FmStateStruct->maxNumOfOpenDmas     = BMI_MAX_NUM_OF_DMAS;
-+#endif /* FM_HAS_TOTAL_DMAS */
-+#if (DPAA_VERSION < 11)
-+        p_Fm->p_FmDriverParam->dma_comm_qtsh_clr_emer        = DEFAULT_dmaCommQLow;
-+        p_Fm->p_FmDriverParam->dma_comm_qtsh_asrt_emer       = DEFAULT_dmaCommQHigh;
-+        p_Fm->p_FmDriverParam->dma_cam_num_of_entries        = DEFAULT_dmaCamNumOfEntries;
-+        p_Fm->p_FmDriverParam->dma_read_buf_tsh_clr_emer      = DEFAULT_dmaReadIntBufLow;
-+        p_Fm->p_FmDriverParam->dma_read_buf_tsh_asrt_emer     = DEFAULT_dmaReadIntBufHigh;
-+        p_Fm->p_FmDriverParam->dma_write_buf_tsh_clr_emer     = DEFAULT_dmaWriteIntBufLow;
-+        p_Fm->p_FmDriverParam->dma_write_buf_tsh_asrt_emer    = DEFAULT_dmaWriteIntBufHigh;
-+        p_Fm->p_FmDriverParam->dma_axi_dbg_num_of_beats       = DEFAULT_axiDbgNumOfBeats;
-+#endif /* (DPAA_VERSION < 11) */
-+#ifdef FM_NO_TNUM_AGING
-+    p_Fm->p_FmDriverParam->tnum_aging_period = 0;
-+#endif
-+    p_Fm->tnumAgingPeriod = p_Fm->p_FmDriverParam->tnum_aging_period;
-+
-+   return p_Fm;
-+}
-+
-+/**************************************************************************//**
-+ @Function      FM_Init
-+
-+ @Description   Initializes the FM module
-+
-+ @Param[in]     h_Fm - FM module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_Init(t_Handle h_Fm)
-+{
-+    t_Fm                    *p_Fm = (t_Fm*)h_Fm;
-+    struct fman_cfg         *p_FmDriverParam = NULL;
-+    t_Error                 err = E_OK;
-+    int                     i;
-+    t_FmRevisionInfo        revInfo;
-+    struct fman_rg          fman_rg;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+
-+    fman_rg.bmi_rg = p_Fm->p_FmBmiRegs;
-+    fman_rg.qmi_rg = p_Fm->p_FmQmiRegs;
-+    fman_rg.fpm_rg = p_Fm->p_FmFpmRegs;
-+    fman_rg.dma_rg = p_Fm->p_FmDmaRegs;
-+
-+    p_Fm->p_FmStateStruct->count1MicroBit = FM_TIMESTAMP_1_USEC_BIT;
-+    p_Fm->p_FmDriverParam->num_of_fman_ctrl_evnt_regs = FM_NUM_OF_FMAN_CTRL_EVENT_REGS;
-+
-+    if (p_Fm->guestId != NCSW_MASTER_ID)
-+        return InitGuestMode(p_Fm);
-+
-+    /* if user didn't configured totalFifoSize - (totalFifoSize=0) we configure default
-+    * according to chip. otherwise, we use user's configuration.
-+    */
-+    if (p_Fm->p_FmStateStruct->totalFifoSize == 0)
-+        p_Fm->p_FmStateStruct->totalFifoSize = DEFAULT_totalFifoSize(p_Fm->p_FmStateStruct->revInfo.majorRev,
-+                                                                     p_Fm->p_FmStateStruct->revInfo.minorRev);
-+
-+    CHECK_INIT_PARAMETERS(p_Fm, CheckFmParameters);
-+
-+    p_FmDriverParam = p_Fm->p_FmDriverParam;
-+
-+    FM_GetRevision(p_Fm, &revInfo);
-+
-+    /* clear revision-dependent non existing exception */
-+#ifdef FM_NO_DISPATCH_RAM_ECC
-+    if ((revInfo.majorRev != 4) &&
-+        (revInfo.majorRev < 6))
-+        p_Fm->p_FmStateStruct->exceptions &= ~FM_EX_BMI_DISPATCH_RAM_ECC;
-+#endif /* FM_NO_DISPATCH_RAM_ECC */
-+
-+#ifdef FM_QMI_NO_ECC_EXCEPTIONS
-+    if (revInfo.majorRev == 4)
-+        p_Fm->p_FmStateStruct->exceptions &= ~(FM_EX_QMI_SINGLE_ECC | FM_EX_QMI_DOUBLE_ECC);
-+#endif /* FM_QMI_NO_ECC_EXCEPTIONS */
-+
-+#ifdef FM_QMI_NO_SINGLE_ECC_EXCEPTION
-+    if (revInfo.majorRev >= 6)
-+       p_Fm->p_FmStateStruct->exceptions &= ~FM_EX_QMI_SINGLE_ECC;
-+#endif /* FM_QMI_NO_SINGLE_ECC_EXCEPTION */
-+
-+    FmMuramClear(p_Fm->h_FmMuram);
-+
-+    /* clear CPG */
-+    IOMemSet32(UINT_TO_PTR(p_Fm->baseAddr + FM_MM_CGP), 0, FM_PORT_NUM_OF_CONGESTION_GRPS);
-+
-+    /* add to the default exceptions the user's definitions */
-+    p_Fm->p_FmStateStruct->exceptions |= p_Fm->userSetExceptions;
-+
-+    /* Reset the FM if required */
-+    if (p_Fm->resetOnInit)
-+    {
-+#ifdef FM_UCODE_NOT_RESET_ERRATA_BUGZILLA6173
-+        if ((err = FwNotResetErratumBugzilla6173WA(p_Fm)) != E_OK)
-+            RETURN_ERROR(MAJOR, err, NO_MSG);
-+#else  /* not FM_UCODE_NOT_RESET_ERRATA_BUGZILLA6173 */
-+
-+        if (p_Fm->f_ResetOnInitOverride)
-+        {
-+        	/* Perform user specific FMan reset */
-+        	p_Fm->f_ResetOnInitOverride(h_Fm);
-+        }
-+        else
-+        {
-+        	/* Perform FMan reset */
-+        	FmReset(h_Fm);
-+        }
-+
-+        if (fman_is_qmi_halt_not_busy_state(p_Fm->p_FmQmiRegs))
-+        {
-+            fman_resume(p_Fm->p_FmFpmRegs);
-+            XX_UDelay(100);
-+        }
-+#endif /* not FM_UCODE_NOT_RESET_ERRATA_BUGZILLA6173 */
-+    }
-+
-+#ifdef FM_UCODE_NOT_RESET_ERRATA_BUGZILLA6173
-+    if (!p_Fm->resetOnInit) /* Skip operations done in errata workaround */
-+    {
-+#endif /* FM_UCODE_NOT_RESET_ERRATA_BUGZILLA6173 */
-+    /* Load FMan-Controller code to IRAM */
-+
-+    ClearIRam(p_Fm);
-+
-+    if (p_Fm->firmware.p_Code && (LoadFmanCtrlCode(p_Fm) != E_OK))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+#ifdef FM_UCODE_NOT_RESET_ERRATA_BUGZILLA6173
-+    }
-+#endif /* FM_UCODE_NOT_RESET_ERRATA_BUGZILLA6173 */
-+
-+#ifdef FM_CAPWAP_SUPPORT
-+    /* save first 256 byte in MURAM */
-+    p_Fm->resAddr = PTR_TO_UINT(FM_MURAM_AllocMem(p_Fm->h_FmMuram, 256, 0));
-+    if (!p_Fm->resAddr)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MURAM alloc for reserved Area failed"));
-+
-+    WRITE_BLOCK(UINT_TO_PTR(p_Fm->resAddr), 0, 256);
-+#endif /* FM_CAPWAP_SUPPORT */
-+
-+#if (DPAA_VERSION >= 11)
-+    p_Fm->partVSPBase = AllocVSPsForPartition(h_Fm, p_Fm->partVSPBase, p_Fm->partNumOfVSPs, p_Fm->guestId);
-+    if (p_Fm->partVSPBase == (uint8_t)(ILLEGAL_BASE))
-+        DBG(WARNING, ("partition VSPs allocation is FAILED"));
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    /* General FM driver initialization */
-+    p_Fm->fmMuramPhysBaseAddr =
-+        (uint64_t)(XX_VirtToPhys(UINT_TO_PTR(p_Fm->baseAddr + FM_MM_MURAM)));
-+
-+    for (i=0;i<e_FM_EV_DUMMY_LAST;i++)
-+        p_Fm->intrMng[i].f_Isr = UnimplementedIsr;
-+    for (i=0;i<FM_NUM_OF_FMAN_CTRL_EVENT_REGS;i++)
-+        p_Fm->fmanCtrlIntr[i].f_Isr = UnimplementedFmanCtrlIsr;
-+
-+    p_FmDriverParam->exceptions = p_Fm->p_FmStateStruct->exceptions;
-+
-+    /**********************/
-+    /* Init DMA Registers */
-+    /**********************/
-+    err = InitFmDma(p_Fm);
-+    if (err != E_OK)
-+    {
-+        FreeInitResources(p_Fm);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    /**********************/
-+    /* Init FPM Registers */
-+    /**********************/
-+    err = InitFmFpm(p_Fm);
-+    if (err != E_OK)
-+    {
-+        FreeInitResources(p_Fm);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    /* define common resources */
-+    /* allocate MURAM for FIFO according to total size */
-+    p_Fm->fifoBaseAddr = PTR_TO_UINT(FM_MURAM_AllocMem(p_Fm->h_FmMuram,
-+                                                       p_Fm->p_FmStateStruct->totalFifoSize,
-+                                                       BMI_FIFO_ALIGN));
-+    if (!p_Fm->fifoBaseAddr)
-+    {
-+        FreeInitResources(p_Fm);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MURAM alloc for BMI FIFO failed"));
-+    }
-+
-+    p_FmDriverParam->fifo_base_addr = (uint32_t)(XX_VirtToPhys(UINT_TO_PTR(p_Fm->fifoBaseAddr)) - p_Fm->fmMuramPhysBaseAddr);
-+    p_FmDriverParam->total_fifo_size = p_Fm->p_FmStateStruct->totalFifoSize;
-+    p_FmDriverParam->total_num_of_tasks = p_Fm->p_FmStateStruct->totalNumOfTasks;
-+    p_FmDriverParam->clk_freq = p_Fm->p_FmStateStruct->fmClkFreq;
-+
-+    /**********************/
-+    /* Init BMI Registers */
-+    /**********************/
-+    err = InitFmBmi(p_Fm);
-+    if (err != E_OK)
-+    {
-+        FreeInitResources(p_Fm);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    /**********************/
-+    /* Init QMI Registers */
-+    /**********************/
-+    err = InitFmQmi(p_Fm);
-+    if (err != E_OK)
-+    {
-+        FreeInitResources(p_Fm);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    /* build the FM master partition IPC address */
-+    if (Sprint (p_Fm->fmModuleName, "FM_%d_%d",p_Fm->p_FmStateStruct->fmId, NCSW_MASTER_ID) != 6)
-+    {
-+        FreeInitResources(p_Fm);
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("Sprint failed"));
-+    }
-+
-+    err = XX_IpcRegisterMsgHandler(p_Fm->fmModuleName, FmHandleIpcMsgCB, p_Fm, FM_IPC_MAX_REPLY_SIZE);
-+    if (err)
-+    {
-+        FreeInitResources(p_Fm);
-+        RETURN_ERROR(MAJOR, err, NO_MSG);
-+    }
-+
-+    /* Register the FM interrupts handlers */
-+    if (p_Fm->p_FmStateStruct->irq != NO_IRQ)
-+    {
-+        XX_SetIntr(p_Fm->p_FmStateStruct->irq, FM_EventIsr, p_Fm);
-+        XX_EnableIntr(p_Fm->p_FmStateStruct->irq);
-+    }
-+
-+    if (p_Fm->p_FmStateStruct->errIrq != NO_IRQ)
-+    {
-+        XX_SetIntr(p_Fm->p_FmStateStruct->errIrq, (void (*) (t_Handle))FM_ErrorIsr, p_Fm);
-+        XX_EnableIntr(p_Fm->p_FmStateStruct->errIrq);
-+    }
-+
-+    err = (t_Error)fman_enable(&fman_rg , p_FmDriverParam);
-+    if (err != E_OK)
-+        return err; /* FIXME */
-+
-+    EnableTimeStamp(p_Fm);
-+
-+    if (p_Fm->firmware.p_Code)
-+    {
-+        XX_Free(p_Fm->firmware.p_Code);
-+        p_Fm->firmware.p_Code = NULL;
-+    }
-+
-+    XX_Free(p_Fm->p_FmDriverParam);
-+    p_Fm->p_FmDriverParam = NULL;
-+
-+    return E_OK;
-+}
-+
-+/**************************************************************************//**
-+ @Function      FM_Free
-+
-+ @Description   Frees all resources that were assigned to FM module.
-+
-+                Calling this routine invalidates the descriptor.
-+
-+ @Param[in]     h_Fm - FM module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_Free(t_Handle h_Fm)
-+{
-+    t_Fm    *p_Fm = (t_Fm*)h_Fm;
-+    struct fman_rg          fman_rg;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+
-+    fman_rg.bmi_rg = p_Fm->p_FmBmiRegs;
-+    fman_rg.qmi_rg = p_Fm->p_FmQmiRegs;
-+    fman_rg.fpm_rg = p_Fm->p_FmFpmRegs;
-+    fman_rg.dma_rg = p_Fm->p_FmDmaRegs;
-+
-+    if (p_Fm->guestId != NCSW_MASTER_ID)
-+    {
-+#if (DPAA_VERSION >= 11)
-+        FreeVSPsForPartition(h_Fm, p_Fm->partVSPBase, p_Fm->partNumOfVSPs, p_Fm->guestId);
-+
-+        if (p_Fm->p_FmSp)
-+        {
-+            XX_Free(p_Fm->p_FmSp);
-+            p_Fm->p_FmSp = NULL;
-+        }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+        if (p_Fm->fmModuleName[0] != 0)
-+            XX_IpcUnregisterMsgHandler(p_Fm->fmModuleName);
-+
-+        if (!p_Fm->recoveryMode)
-+            XX_Free(p_Fm->p_FmStateStruct);
-+
-+        XX_Free(p_Fm);
-+
-+        return E_OK;
-+    }
-+
-+    fman_free_resources(&fman_rg);
-+
-+    if ((p_Fm->guestId == NCSW_MASTER_ID) && (p_Fm->fmModuleName[0] != 0))
-+        XX_IpcUnregisterMsgHandler(p_Fm->fmModuleName);
-+
-+    if (p_Fm->p_FmStateStruct)
-+    {
-+        if (p_Fm->p_FmStateStruct->irq != NO_IRQ)
-+        {
-+            XX_DisableIntr(p_Fm->p_FmStateStruct->irq);
-+            XX_FreeIntr(p_Fm->p_FmStateStruct->irq);
-+        }
-+        if (p_Fm->p_FmStateStruct->errIrq != NO_IRQ)
-+        {
-+            XX_DisableIntr(p_Fm->p_FmStateStruct->errIrq);
-+            XX_FreeIntr(p_Fm->p_FmStateStruct->errIrq);
-+        }
-+    }
-+
-+#if (DPAA_VERSION >= 11)
-+    FreeVSPsForPartition(h_Fm, p_Fm->partVSPBase, p_Fm->partNumOfVSPs, p_Fm->guestId);
-+
-+    if (p_Fm->p_FmSp)
-+    {
-+        XX_Free(p_Fm->p_FmSp);
-+        p_Fm->p_FmSp = NULL;
-+    }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    if (p_Fm->h_Spinlock)
-+        XX_FreeSpinlock(p_Fm->h_Spinlock);
-+
-+    if (p_Fm->p_FmDriverParam)
-+    {
-+        if (p_Fm->firmware.p_Code)
-+            XX_Free(p_Fm->firmware.p_Code);
-+        XX_Free(p_Fm->p_FmDriverParam);
-+        p_Fm->p_FmDriverParam = NULL;
-+    }
-+
-+    FreeInitResources(p_Fm);
-+
-+    if (!p_Fm->recoveryMode && p_Fm->p_FmStateStruct)
-+        XX_Free(p_Fm->p_FmStateStruct);
-+
-+    XX_Free(p_Fm);
-+
-+    return E_OK;
-+}
-+
-+/*************************************************/
-+/*       API Advanced Init unit functions        */
-+/*************************************************/
-+
-+t_Error FM_ConfigResetOnInit(t_Handle h_Fm, bool enable)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    p_Fm->resetOnInit = enable;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigResetOnInitOverrideCallback(t_Handle h_Fm, t_FmResetOnInitOverrideCallback *f_ResetOnInitOverride)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    p_Fm->f_ResetOnInitOverride = f_ResetOnInitOverride;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigTotalFifoSize(t_Handle h_Fm, uint32_t totalFifoSize)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    p_Fm->p_FmStateStruct->totalFifoSize = totalFifoSize;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigDmaCacheOverride(t_Handle h_Fm, e_FmDmaCacheOverride cacheOverride)
-+{
-+    t_Fm                            *p_Fm = (t_Fm*)h_Fm;
-+    enum fman_dma_cache_override    fsl_cache_override;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    FMAN_CACHE_OVERRIDE_TRANS(fsl_cache_override, cacheOverride)
-+    p_Fm->p_FmDriverParam->dma_cache_override = fsl_cache_override;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigDmaAidOverride(t_Handle h_Fm, bool aidOverride)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    p_Fm->p_FmDriverParam->dma_aid_override = aidOverride;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigDmaAidMode(t_Handle h_Fm, e_FmDmaAidMode aidMode)
-+{
-+    t_Fm                    *p_Fm = (t_Fm*)h_Fm;
-+    enum fman_dma_aid_mode  fsl_aid_mode;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    FMAN_AID_MODE_TRANS(fsl_aid_mode, aidMode);
-+    p_Fm->p_FmDriverParam->dma_aid_mode = fsl_aid_mode;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigDmaAxiDbgNumOfBeats(t_Handle h_Fm, uint8_t axiDbgNumOfBeats)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+#if (DPAA_VERSION >= 11)
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("Not available for this FM revision!"));
-+#else
-+    p_Fm->p_FmDriverParam->dma_axi_dbg_num_of_beats = axiDbgNumOfBeats;
-+
-+    return E_OK;
-+#endif /* (DPAA_VERSION >= 11) */
-+}
-+
-+t_Error FM_ConfigDmaCamNumOfEntries(t_Handle h_Fm, uint8_t numOfEntries)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    p_Fm->p_FmDriverParam->dma_cam_num_of_entries = numOfEntries;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigDmaDbgCounter(t_Handle h_Fm, e_FmDmaDbgCntMode fmDmaDbgCntMode)
-+{
-+    t_Fm                        *p_Fm = (t_Fm*)h_Fm;
-+    enum fman_dma_dbg_cnt_mode  fsl_dma_dbg_cnt;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    FMAN_DMA_DBG_CNT_TRANS(fsl_dma_dbg_cnt, fmDmaDbgCntMode);
-+    p_Fm->p_FmDriverParam->dma_dbg_cnt_mode = fsl_dma_dbg_cnt;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigDmaStopOnBusErr(t_Handle h_Fm, bool stop)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    p_Fm->p_FmDriverParam->dma_stop_on_bus_error = stop;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigDmaEmergency(t_Handle h_Fm, t_FmDmaEmergency *p_Emergency)
-+{
-+    t_Fm                            *p_Fm = (t_Fm*)h_Fm;
-+    enum fman_dma_emergency_level   fsl_dma_emer;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    FMAN_DMA_EMER_TRANS(fsl_dma_emer, p_Emergency->emergencyLevel);
-+    p_Fm->p_FmDriverParam->dma_en_emergency = TRUE;
-+    p_Fm->p_FmDriverParam->dma_emergency_bus_select = (uint32_t)p_Emergency->emergencyBusSelect;
-+    p_Fm->p_FmDriverParam->dma_emergency_level = fsl_dma_emer;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigDmaEmergencySmoother(t_Handle h_Fm, uint32_t emergencyCnt)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    p_Fm->p_FmDriverParam->dma_en_emergency_smoother = TRUE;
-+    p_Fm->p_FmDriverParam->dma_emergency_switch_counter = emergencyCnt;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigDmaErr(t_Handle h_Fm, e_FmDmaErr dmaErr)
-+{
-+    t_Fm                *p_Fm = (t_Fm*)h_Fm;
-+    enum fman_dma_err   fsl_dma_err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    FMAN_DMA_ERR_TRANS(fsl_dma_err, dmaErr);
-+    p_Fm->p_FmDriverParam->dma_err = fsl_dma_err;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigCatastrophicErr(t_Handle h_Fm, e_FmCatastrophicErr catastrophicErr)
-+{
-+    t_Fm                        *p_Fm = (t_Fm*)h_Fm;
-+    enum fman_catastrophic_err  fsl_catastrophic_err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    FMAN_CATASTROPHIC_ERR_TRANS(fsl_catastrophic_err, catastrophicErr);
-+    p_Fm->p_FmDriverParam->catastrophic_err = fsl_catastrophic_err;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigEnableMuramTestMode(t_Handle h_Fm)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    if (p_Fm->p_FmStateStruct->revInfo.majorRev >= 6)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("Not available for this FM revision!"));
-+
-+    p_Fm->p_FmDriverParam->en_muram_test_mode = TRUE;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigEnableIramTestMode(t_Handle h_Fm)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE );
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    if (p_Fm->p_FmStateStruct->revInfo.majorRev >= 6)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("Not available for this FM revision!"));
-+
-+    p_Fm->p_FmDriverParam->en_iram_test_mode = TRUE;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigHaltOnExternalActivation(t_Handle h_Fm, bool enable)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    p_Fm->p_FmDriverParam->halt_on_external_activ = enable;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigHaltOnUnrecoverableEccError(t_Handle h_Fm, bool enable)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    if (p_Fm->p_FmStateStruct->revInfo.majorRev >= 6)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("Not available for this FM revision!"));
-+
-+    p_Fm->p_FmDriverParam->halt_on_unrecov_ecc_err = enable;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigException(t_Handle h_Fm, e_FmExceptions exception, bool enable)
-+{
-+    t_Fm                *p_Fm = (t_Fm*)h_Fm;
-+    uint32_t            bitMask = 0;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    GET_EXCEPTION_FLAG(bitMask, exception);
-+    if (bitMask)
-+    {
-+        if (enable)
-+            p_Fm->userSetExceptions |= bitMask;
-+        else
-+            p_Fm->p_FmStateStruct->exceptions &= ~bitMask;
-+    }
-+    else
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Undefined exception"));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigExternalEccRamsEnable(t_Handle h_Fm, bool enable)
-+{
-+    t_Fm        *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    p_Fm->p_FmDriverParam->external_ecc_rams_enable = enable;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigTnumAgingPeriod(t_Handle h_Fm, uint16_t tnumAgingPeriod)
-+{
-+    t_Fm             *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    p_Fm->p_FmDriverParam->tnum_aging_period = tnumAgingPeriod;
-+    p_Fm->tnumAgingPeriod = p_Fm->p_FmDriverParam->tnum_aging_period;
-+
-+    return E_OK;
-+}
-+
-+/****************************************************/
-+/*       Hidden-DEBUG Only API                      */
-+/****************************************************/
-+
-+t_Error FM_ConfigThresholds(t_Handle h_Fm, t_FmThresholds *p_FmThresholds)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    p_Fm->p_FmDriverParam->disp_limit_tsh  = p_FmThresholds->dispLimit;
-+    p_Fm->p_FmDriverParam->prs_disp_tsh    = p_FmThresholds->prsDispTh;
-+    p_Fm->p_FmDriverParam->plcr_disp_tsh   = p_FmThresholds->plcrDispTh;
-+    p_Fm->p_FmDriverParam->kg_disp_tsh     = p_FmThresholds->kgDispTh;
-+    p_Fm->p_FmDriverParam->bmi_disp_tsh    = p_FmThresholds->bmiDispTh;
-+    p_Fm->p_FmDriverParam->qmi_enq_disp_tsh = p_FmThresholds->qmiEnqDispTh;
-+    p_Fm->p_FmDriverParam->qmi_deq_disp_tsh = p_FmThresholds->qmiDeqDispTh;
-+    p_Fm->p_FmDriverParam->fm_ctl1_disp_tsh = p_FmThresholds->fmCtl1DispTh;
-+    p_Fm->p_FmDriverParam->fm_ctl2_disp_tsh = p_FmThresholds->fmCtl2DispTh;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigDmaSosEmergencyThreshold(t_Handle h_Fm, uint32_t dmaSosEmergency)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    p_Fm->p_FmDriverParam->dma_sos_emergency = dmaSosEmergency;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigDmaWriteBufThresholds(t_Handle h_Fm, t_FmDmaThresholds *p_FmDmaThresholds)
-+
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+#if (DPAA_VERSION >= 11)
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("Not available for this FM revision!"));
-+#else
-+    p_Fm->p_FmDriverParam->dma_write_buf_tsh_asrt_emer = p_FmDmaThresholds->assertEmergency;
-+    p_Fm->p_FmDriverParam->dma_write_buf_tsh_clr_emer  = p_FmDmaThresholds->clearEmergency;
-+
-+    return E_OK;
-+#endif
-+}
-+
-+t_Error FM_ConfigDmaCommQThresholds(t_Handle h_Fm, t_FmDmaThresholds *p_FmDmaThresholds)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    p_Fm->p_FmDriverParam->dma_comm_qtsh_asrt_emer    = p_FmDmaThresholds->assertEmergency;
-+    p_Fm->p_FmDriverParam->dma_comm_qtsh_clr_emer     = p_FmDmaThresholds->clearEmergency;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigDmaReadBufThresholds(t_Handle h_Fm, t_FmDmaThresholds *p_FmDmaThresholds)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+#if (DPAA_VERSION >= 11)
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("Not available for this FM revision!"));
-+#else
-+    p_Fm->p_FmDriverParam->dma_read_buf_tsh_clr_emer   = p_FmDmaThresholds->clearEmergency;
-+    p_Fm->p_FmDriverParam->dma_read_buf_tsh_asrt_emer  = p_FmDmaThresholds->assertEmergency;
-+
-+    return E_OK;
-+#endif
-+}
-+
-+t_Error FM_ConfigDmaWatchdog(t_Handle h_Fm, uint32_t watchdogValue)
-+{
-+    t_Fm                *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    p_Fm->p_FmDriverParam->dma_watchdog = watchdogValue;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_ConfigEnableCounters(t_Handle h_Fm)
-+{
-+    t_Fm                *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+UNUSED(p_Fm);
-+
-+    return E_OK;
-+}
-+
-+t_Error FmGetSetParams(t_Handle h_Fm, t_FmGetSetParams *p_Params)
-+{
-+	t_Fm* p_Fm = (t_Fm*)h_Fm;
-+	if (p_Params->setParams.type & UPDATE_FM_CLD)
-+	{
-+		WRITE_UINT32(p_Fm->p_FmFpmRegs->fm_cld, GET_UINT32(
-+				p_Fm->p_FmFpmRegs->fm_cld) | 0x00000800);
-+	}
-+	if (p_Params->setParams.type & CLEAR_IRAM_READY)
-+	{
-+	    t_FMIramRegs *p_Iram = (t_FMIramRegs *)UINT_TO_PTR(p_Fm->baseAddr + FM_MM_IMEM);
-+		WRITE_UINT32(p_Iram->iready,GET_UINT32(p_Iram->iready) & ~IRAM_READY);
-+	}
-+	if (p_Params->setParams.type & UPDATE_FPM_EXTC)
-+		WRITE_UINT32(p_Fm->p_FmFpmRegs->fmfp_extc,0x80000000);
-+	if (p_Params->setParams.type & UPDATE_FPM_EXTC_CLEAR)
-+		WRITE_UINT32(p_Fm->p_FmFpmRegs->fmfp_extc,0x00800000);
-+	if (p_Params->setParams.type & UPDATE_FPM_BRKC_SLP)
-+	{	
-+		if (p_Params->setParams.sleep)
-+			WRITE_UINT32(p_Fm->p_FmFpmRegs->fmfp_brkc, GET_UINT32(
-+				p_Fm->p_FmFpmRegs->fmfp_brkc) | FPM_BRKC_SLP);
-+		else
-+			WRITE_UINT32(p_Fm->p_FmFpmRegs->fmfp_brkc, GET_UINT32(
-+				p_Fm->p_FmFpmRegs->fmfp_brkc) & ~FPM_BRKC_SLP);
-+	}
-+	if (p_Params->getParams.type & GET_FM_CLD)
-+		p_Params->getParams.fm_cld = GET_UINT32(p_Fm->p_FmFpmRegs->fm_cld);
-+	if (p_Params->getParams.type & GET_FMQM_GS)
-+		p_Params->getParams.fmqm_gs = GET_UINT32(p_Fm->p_FmQmiRegs->fmqm_gs);
-+	if (p_Params->getParams.type & GET_FM_NPI)
-+		p_Params->getParams.fm_npi = GET_UINT32(p_Fm->p_FmFpmRegs->fm_npi);
-+	if (p_Params->getParams.type & GET_FMFP_EXTC)
-+		p_Params->getParams.fmfp_extc = GET_UINT32(p_Fm->p_FmFpmRegs->fmfp_extc);
-+	return E_OK;
-+}
-+
-+
-+/****************************************************/
-+/*       API Run-time Control uint functions        */
-+/****************************************************/
-+void FM_EventIsr(t_Handle h_Fm)
-+{
-+#define FM_M_CALL_1G_MAC_ISR(_id)    \
-+    {                                \
-+        if (p_Fm->guestId != p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_1G_MAC0+_id)].guestId)    \
-+            SendIpcIsr(p_Fm, (e_FmInterModuleEvent)(e_FM_EV_1G_MAC0+_id), pending);                 \
-+        else                                                                                        \
-+            p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_1G_MAC0+_id)].f_Isr(p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_1G_MAC0+_id)].h_SrcHandle);\
-+    }
-+#define FM_M_CALL_10G_MAC_ISR(_id)   \
-+    {                                \
-+        if (p_Fm->guestId != p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_10G_MAC0+_id)].guestId)    \
-+            SendIpcIsr(p_Fm, (e_FmInterModuleEvent)(e_FM_EV_10G_MAC0+_id), pending);                 \
-+        else                                                                                         \
-+            p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_10G_MAC0+_id)].f_Isr(p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_10G_MAC0+_id)].h_SrcHandle);\
-+    }
-+    t_Fm                    *p_Fm = (t_Fm*)h_Fm;
-+    uint32_t                pending, event;
-+    struct fman_fpm_regs *fpm_rg;
-+
-+    SANITY_CHECK_RETURN(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN(!p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    fpm_rg = p_Fm->p_FmFpmRegs;
-+
-+    /* normal interrupts */
-+    pending = fman_get_normal_pending(fpm_rg);
-+    if (!pending)
-+        return;
-+    if (pending & INTR_EN_WAKEUP) // this is a wake up from sleep interrupt
-+    {
-+        t_FmGetSetParams fmGetSetParams;
-+        memset(&fmGetSetParams, 0, sizeof (t_FmGetSetParams));
-+        fmGetSetParams.setParams.type = UPDATE_FPM_BRKC_SLP;
-+        fmGetSetParams.setParams.sleep = 0;
-+        FmGetSetParams(h_Fm, &fmGetSetParams);
-+    }
-+    if (pending & INTR_EN_QMI)
-+        QmiEvent(p_Fm);
-+    if (pending & INTR_EN_PRS)
-+        p_Fm->intrMng[e_FM_EV_PRS].f_Isr(p_Fm->intrMng[e_FM_EV_PRS].h_SrcHandle);
-+    if (pending & INTR_EN_PLCR)
-+        p_Fm->intrMng[e_FM_EV_PLCR].f_Isr(p_Fm->intrMng[e_FM_EV_PLCR].h_SrcHandle);
-+    if (pending & INTR_EN_TMR)
-+            p_Fm->intrMng[e_FM_EV_TMR].f_Isr(p_Fm->intrMng[e_FM_EV_TMR].h_SrcHandle);
-+
-+    /* MAC events may belong to different partitions */
-+    if (pending & INTR_EN_1G_MAC0)
-+        FM_M_CALL_1G_MAC_ISR(0);
-+    if (pending & INTR_EN_1G_MAC1)
-+        FM_M_CALL_1G_MAC_ISR(1);
-+    if (pending & INTR_EN_1G_MAC2)
-+        FM_M_CALL_1G_MAC_ISR(2);
-+    if (pending & INTR_EN_1G_MAC3)
-+        FM_M_CALL_1G_MAC_ISR(3);
-+    if (pending & INTR_EN_1G_MAC4)
-+        FM_M_CALL_1G_MAC_ISR(4);
-+    if (pending & INTR_EN_1G_MAC5)
-+        FM_M_CALL_1G_MAC_ISR(5);
-+    if (pending & INTR_EN_1G_MAC6)
-+        FM_M_CALL_1G_MAC_ISR(6);
-+    if (pending & INTR_EN_1G_MAC7)
-+        FM_M_CALL_1G_MAC_ISR(7);
-+    if (pending & INTR_EN_10G_MAC0)
-+        FM_M_CALL_10G_MAC_ISR(0);
-+    if (pending & INTR_EN_10G_MAC1)
-+        FM_M_CALL_10G_MAC_ISR(1);
-+
-+    /* IM port events may belong to different partitions */
-+    if (pending & INTR_EN_REV0)
-+    {
-+        event = fman_get_controller_event(fpm_rg, 0);
-+        if (p_Fm->guestId != p_Fm->intrMng[e_FM_EV_FMAN_CTRL_0].guestId)
-+            /*TODO IPC ISR For Fman Ctrl */
-+            ASSERT_COND(0);
-+            /* SendIpcIsr(p_Fm, e_FM_EV_FMAN_CTRL_0, pending); */
-+        else
-+            p_Fm->fmanCtrlIntr[0].f_Isr(p_Fm->fmanCtrlIntr[0].h_SrcHandle, event);
-+
-+    }
-+    if (pending & INTR_EN_REV1)
-+    {
-+        event = fman_get_controller_event(fpm_rg, 1);
-+        if (p_Fm->guestId != p_Fm->intrMng[e_FM_EV_FMAN_CTRL_1].guestId)
-+            /*TODO IPC ISR For Fman Ctrl */
-+            ASSERT_COND(0);
-+            /* SendIpcIsr(p_Fm, e_FM_EV_FMAN_CTRL_1, pending); */
-+        else
-+            p_Fm->fmanCtrlIntr[1].f_Isr(p_Fm->fmanCtrlIntr[1].h_SrcHandle, event);
-+    }
-+    if (pending & INTR_EN_REV2)
-+    {
-+        event = fman_get_controller_event(fpm_rg, 2);
-+        if (p_Fm->guestId != p_Fm->intrMng[e_FM_EV_FMAN_CTRL_2].guestId)
-+            /*TODO IPC ISR For Fman Ctrl */
-+            ASSERT_COND(0);
-+            /* SendIpcIsr(p_Fm, e_FM_EV_FMAN_CTRL_2, pending); */
-+        else
-+           p_Fm->fmanCtrlIntr[2].f_Isr(p_Fm->fmanCtrlIntr[2].h_SrcHandle, event);
-+    }
-+    if (pending & INTR_EN_REV3)
-+    {
-+        event = fman_get_controller_event(fpm_rg, 3);
-+        if (p_Fm->guestId != p_Fm->intrMng[e_FM_EV_FMAN_CTRL_3].guestId)
-+            /*TODO IPC ISR For Fman Ctrl */
-+            ASSERT_COND(0);
-+            /* SendIpcIsr(p_Fm, e_FM_EV_FMAN_CTRL_2, pendin3); */
-+        else
-+            p_Fm->fmanCtrlIntr[3].f_Isr(p_Fm->fmanCtrlIntr[3].h_SrcHandle, event);
-+    }
-+#ifdef FM_MACSEC_SUPPORT
-+    if (pending & INTR_EN_MACSEC_MAC0)
-+    {
-+       if (p_Fm->guestId != p_Fm->intrMng[e_FM_EV_MACSEC_MAC0].guestId)
-+            SendIpcIsr(p_Fm, e_FM_EV_MACSEC_MAC0, pending);
-+        else
-+            p_Fm->intrMng[e_FM_EV_MACSEC_MAC0].f_Isr(p_Fm->intrMng[e_FM_EV_MACSEC_MAC0].h_SrcHandle);
-+    }
-+#endif /* FM_MACSEC_SUPPORT */
-+}
-+
-+t_Error FM_ErrorIsr(t_Handle h_Fm)
-+{
-+#define FM_M_CALL_1G_MAC_ERR_ISR(_id)   \
-+    {                                   \
-+       if (p_Fm->guestId != p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_ERR_1G_MAC0+_id)].guestId) \
-+            SendIpcIsr(p_Fm, (e_FmInterModuleEvent)(e_FM_EV_ERR_1G_MAC0+_id), pending);             \
-+       else                                                                                         \
-+            p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_ERR_1G_MAC0+_id)].f_Isr(p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_ERR_1G_MAC0+_id)].h_SrcHandle);\
-+    }
-+#define FM_M_CALL_10G_MAC_ERR_ISR(_id)   \
-+    {                                    \
-+       if (p_Fm->guestId != p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_ERR_10G_MAC0+_id)].guestId) \
-+            SendIpcIsr(p_Fm, (e_FmInterModuleEvent)(e_FM_EV_ERR_10G_MAC0+_id), pending);             \
-+       else                                                                                          \
-+            p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_ERR_10G_MAC0+_id)].f_Isr(p_Fm->intrMng[(e_FmInterModuleEvent)(e_FM_EV_ERR_10G_MAC0+_id)].h_SrcHandle);\
-+    }
-+    t_Fm                    *p_Fm = (t_Fm*)h_Fm;
-+    uint32_t                pending;
-+    struct fman_fpm_regs *fpm_rg;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Fm->p_FmDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    fpm_rg = p_Fm->p_FmFpmRegs;
-+
-+    /* error interrupts */
-+    pending = fman_get_fpm_error_interrupts(fpm_rg);
-+    if (!pending)
-+        return ERROR_CODE(E_EMPTY);
-+
-+    if (pending & ERR_INTR_EN_BMI)
-+        BmiErrEvent(p_Fm);
-+    if (pending & ERR_INTR_EN_QMI)
-+        QmiErrEvent(p_Fm);
-+    if (pending & ERR_INTR_EN_FPM)
-+        FpmErrEvent(p_Fm);
-+    if (pending & ERR_INTR_EN_DMA)
-+        DmaErrEvent(p_Fm);
-+    if (pending & ERR_INTR_EN_IRAM)
-+        IramErrIntr(p_Fm);
-+    if (pending & ERR_INTR_EN_MURAM)
-+        MuramErrIntr(p_Fm);
-+    if (pending & ERR_INTR_EN_PRS)
-+        p_Fm->intrMng[e_FM_EV_ERR_PRS].f_Isr(p_Fm->intrMng[e_FM_EV_ERR_PRS].h_SrcHandle);
-+    if (pending & ERR_INTR_EN_PLCR)
-+        p_Fm->intrMng[e_FM_EV_ERR_PLCR].f_Isr(p_Fm->intrMng[e_FM_EV_ERR_PLCR].h_SrcHandle);
-+    if (pending & ERR_INTR_EN_KG)
-+        p_Fm->intrMng[e_FM_EV_ERR_KG].f_Isr(p_Fm->intrMng[e_FM_EV_ERR_KG].h_SrcHandle);
-+
-+    /* MAC events may belong to different partitions */
-+    if (pending & ERR_INTR_EN_1G_MAC0)
-+        FM_M_CALL_1G_MAC_ERR_ISR(0);
-+    if (pending & ERR_INTR_EN_1G_MAC1)
-+        FM_M_CALL_1G_MAC_ERR_ISR(1);
-+    if (pending & ERR_INTR_EN_1G_MAC2)
-+        FM_M_CALL_1G_MAC_ERR_ISR(2);
-+    if (pending & ERR_INTR_EN_1G_MAC3)
-+        FM_M_CALL_1G_MAC_ERR_ISR(3);
-+    if (pending & ERR_INTR_EN_1G_MAC4)
-+        FM_M_CALL_1G_MAC_ERR_ISR(4);
-+    if (pending & ERR_INTR_EN_1G_MAC5)
-+        FM_M_CALL_1G_MAC_ERR_ISR(5);
-+    if (pending & ERR_INTR_EN_1G_MAC6)
-+        FM_M_CALL_1G_MAC_ERR_ISR(6);
-+    if (pending & ERR_INTR_EN_1G_MAC7)
-+        FM_M_CALL_1G_MAC_ERR_ISR(7);
-+    if (pending & ERR_INTR_EN_10G_MAC0)
-+        FM_M_CALL_10G_MAC_ERR_ISR(0);
-+    if (pending & ERR_INTR_EN_10G_MAC1)
-+        FM_M_CALL_10G_MAC_ERR_ISR(1);
-+
-+#ifdef FM_MACSEC_SUPPORT
-+    if (pending & ERR_INTR_EN_MACSEC_MAC0)
-+    {
-+       if (p_Fm->guestId != p_Fm->intrMng[e_FM_EV_ERR_MACSEC_MAC0].guestId)
-+            SendIpcIsr(p_Fm, e_FM_EV_ERR_MACSEC_MAC0, pending);
-+        else
-+            p_Fm->intrMng[e_FM_EV_ERR_MACSEC_MAC0].f_Isr(p_Fm->intrMng[e_FM_EV_ERR_MACSEC_MAC0].h_SrcHandle);
-+    }
-+#endif /* FM_MACSEC_SUPPORT */
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_SetPortsBandwidth(t_Handle h_Fm, t_FmPortsBandwidthParams *p_PortsBandwidth)
-+{
-+    t_Fm        *p_Fm = (t_Fm*)h_Fm;
-+    int         i;
-+    uint8_t     sum;
-+    uint8_t     hardwarePortId;
-+    uint8_t     weights[64];
-+    uint8_t     weight, maxPercent = 0;
-+    struct fman_bmi_regs *bmi_rg;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Fm->p_FmDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    bmi_rg = p_Fm->p_FmBmiRegs;
-+
-+    memset(weights, 0, (sizeof(uint8_t) * 64));
-+
-+    /* check that all ports add up to 100% */
-+    sum = 0;
-+    for (i=0; i < p_PortsBandwidth->numOfPorts; i++)
-+        sum +=p_PortsBandwidth->portsBandwidths[i].bandwidth;
-+    if (sum != 100)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Sum of ports bandwidth differ from 100%"));
-+
-+    /* find highest percent */
-+    for (i=0; i < p_PortsBandwidth->numOfPorts; i++)
-+    {
-+        if (p_PortsBandwidth->portsBandwidths[i].bandwidth > maxPercent)
-+            maxPercent = p_PortsBandwidth->portsBandwidths[i].bandwidth;
-+    }
-+
-+    ASSERT_COND(maxPercent > 0); /* guaranteed by sum = 100 */
-+
-+    /* calculate weight for each port */
-+    for (i=0; i < p_PortsBandwidth->numOfPorts; i++)
-+    {
-+        weight = (uint8_t)((p_PortsBandwidth->portsBandwidths[i].bandwidth * PORT_MAX_WEIGHT ) / maxPercent);
-+        /* we want even division between 1-to-PORT_MAX_WEIGHT. so if exact division
-+           is not reached, we round up so that:
-+           0 until maxPercent/PORT_MAX_WEIGHT get "1"
-+           maxPercent/PORT_MAX_WEIGHT+1 until (maxPercent/PORT_MAX_WEIGHT)*2 get "2"
-+           ...
-+           maxPercent - maxPercent/PORT_MAX_WEIGHT until maxPercent get "PORT_MAX_WEIGHT: */
-+        if ((uint8_t)((p_PortsBandwidth->portsBandwidths[i].bandwidth * PORT_MAX_WEIGHT ) % maxPercent))
-+            weight++;
-+
-+        /* find the location of this port within the register */
-+        hardwarePortId =
-+            SwPortIdToHwPortId(p_PortsBandwidth->portsBandwidths[i].type,
-+                               p_PortsBandwidth->portsBandwidths[i].relativePortId,
-+                               p_Fm->p_FmStateStruct->revInfo.majorRev,
-+                               p_Fm->p_FmStateStruct->revInfo.minorRev);
-+
-+        ASSERT_COND(IN_RANGE(1, hardwarePortId, 63));
-+        weights[hardwarePortId] = weight;
-+    }
-+
-+    fman_set_ports_bandwidth(bmi_rg, weights);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_EnableRamsEcc(t_Handle h_Fm)
-+{
-+    t_Fm        *p_Fm = (t_Fm*)h_Fm;
-+    struct fman_fpm_regs *fpm_rg;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+
-+    fpm_rg = p_Fm->p_FmFpmRegs;
-+
-+    if (p_Fm->guestId != NCSW_MASTER_ID)
-+    {
-+        t_FmIpcMsg      msg;
-+        t_Error         err;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        msg.msgId = FM_ENABLE_RAM_ECC;
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId),
-+                                NULL,
-+                                NULL,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        return E_OK;
-+    }
-+
-+    if (!p_Fm->p_FmStateStruct->internalCall)
-+        p_Fm->p_FmStateStruct->explicitEnable = TRUE;
-+    p_Fm->p_FmStateStruct->internalCall = FALSE;
-+
-+    if (p_Fm->p_FmStateStruct->ramsEccEnable)
-+        return E_OK;
-+    else
-+    {
-+        fman_enable_rams_ecc(fpm_rg);
-+        p_Fm->p_FmStateStruct->ramsEccEnable = TRUE;
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_DisableRamsEcc(t_Handle h_Fm)
-+{
-+    t_Fm        *p_Fm = (t_Fm*)h_Fm;
-+    bool        explicitDisable = FALSE;
-+    struct fman_fpm_regs *fpm_rg;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Fm->p_FmDriverParam, E_INVALID_HANDLE);
-+
-+    fpm_rg = p_Fm->p_FmFpmRegs;
-+
-+    if (p_Fm->guestId != NCSW_MASTER_ID)
-+    {
-+        t_Error             err;
-+        t_FmIpcMsg          msg;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        msg.msgId = FM_DISABLE_RAM_ECC;
-+        if ((err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                     (uint8_t*)&msg,
-+                                     sizeof(msg.msgId),
-+                                     NULL,
-+                                     NULL,
-+                                     NULL,
-+                                     NULL)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        return E_OK;
-+    }
-+
-+    if (!p_Fm->p_FmStateStruct->internalCall)
-+        explicitDisable = TRUE;
-+    p_Fm->p_FmStateStruct->internalCall = FALSE;
-+
-+    /* if rams are already disabled, or if rams were explicitly enabled and are
-+       currently called indirectly (not explicitly), ignore this call. */
-+    if (!p_Fm->p_FmStateStruct->ramsEccEnable ||
-+        (p_Fm->p_FmStateStruct->explicitEnable && !explicitDisable))
-+        return E_OK;
-+    else
-+    {
-+        if (p_Fm->p_FmStateStruct->explicitEnable)
-+            /* This is the case were both explicit are TRUE.
-+               Turn off this flag for cases were following ramsEnable
-+               routines are called */
-+            p_Fm->p_FmStateStruct->explicitEnable = FALSE;
-+
-+        fman_enable_rams_ecc(fpm_rg);
-+        p_Fm->p_FmStateStruct->ramsEccEnable = FALSE;
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_SetException(t_Handle h_Fm, e_FmExceptions exception, bool enable)
-+{
-+    t_Fm                *p_Fm = (t_Fm*)h_Fm;
-+    uint32_t            bitMask = 0;
-+    enum fman_exceptions fslException;
-+    struct fman_rg       fman_rg;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Fm->p_FmDriverParam, E_INVALID_STATE);
-+
-+    fman_rg.bmi_rg = p_Fm->p_FmBmiRegs;
-+    fman_rg.qmi_rg = p_Fm->p_FmQmiRegs;
-+    fman_rg.fpm_rg = p_Fm->p_FmFpmRegs;
-+    fman_rg.dma_rg = p_Fm->p_FmDmaRegs;
-+
-+    GET_EXCEPTION_FLAG(bitMask, exception);
-+    if (bitMask)
-+    {
-+        if (enable)
-+            p_Fm->p_FmStateStruct->exceptions |= bitMask;
-+        else
-+            p_Fm->p_FmStateStruct->exceptions &= ~bitMask;
-+
-+        fslException = FmanExceptionTrans(exception);
-+
-+        return (t_Error)fman_set_exception(&fman_rg,
-+                                  fslException,
-+                                  enable);
-+    }
-+    else
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Undefined exception"));
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_GetRevision(t_Handle h_Fm, t_FmRevisionInfo *p_FmRevisionInfo)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+
-+    p_FmRevisionInfo->majorRev = p_Fm->p_FmStateStruct->revInfo.majorRev;
-+    p_FmRevisionInfo->minorRev = p_Fm->p_FmStateStruct->revInfo.minorRev;
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_GetFmanCtrlCodeRevision(t_Handle h_Fm, t_FmCtrlCodeRevisionInfo *p_RevisionInfo)
-+{
-+    t_Fm                            *p_Fm = (t_Fm*)h_Fm;
-+    t_FMIramRegs                    *p_Iram;
-+    uint32_t                        revInfo;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_RevisionInfo, E_NULL_POINTER);
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_Error                         err;
-+        t_FmIpcMsg                      msg;
-+        t_FmIpcReply                    reply;
-+        uint32_t                        replyLength;
-+        t_FmIpcFmanCtrlCodeRevisionInfo ipcRevInfo;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_GET_FMAN_CTRL_CODE_REV;
-+        replyLength = sizeof(uint32_t) + sizeof(t_FmCtrlCodeRevisionInfo);
-+        if ((err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                     (uint8_t*)&msg,
-+                                     sizeof(msg.msgId),
-+                                     (uint8_t*)&reply,
-+                                     &replyLength,
-+                                     NULL,
-+                                     NULL)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+        if (replyLength != (sizeof(uint32_t) + sizeof(t_FmCtrlCodeRevisionInfo)))
-+            RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+        memcpy((uint8_t*)&ipcRevInfo, reply.replyBody, sizeof(t_FmCtrlCodeRevisionInfo));
-+        p_RevisionInfo->packageRev = ipcRevInfo.packageRev;
-+        p_RevisionInfo->majorRev = ipcRevInfo.majorRev;
-+        p_RevisionInfo->minorRev = ipcRevInfo.minorRev;
-+        return (t_Error)(reply.error);
-+    }
-+    else if (p_Fm->guestId != NCSW_MASTER_ID)
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("running in guest-mode without IPC!"));
-+
-+    p_Iram = (t_FMIramRegs *)UINT_TO_PTR(p_Fm->baseAddr + FM_MM_IMEM);
-+    WRITE_UINT32(p_Iram->iadd, 0x4);
-+    while (GET_UINT32(p_Iram->iadd) != 0x4) ;
-+    revInfo = GET_UINT32(p_Iram->idata);
-+    p_RevisionInfo->packageRev = (uint16_t)((revInfo & 0xFFFF0000) >> 16);
-+    p_RevisionInfo->majorRev = (uint8_t)((revInfo & 0x0000FF00) >> 8);
-+    p_RevisionInfo->minorRev = (uint8_t)(revInfo & 0x000000FF);
-+
-+    return E_OK;
-+}
-+
-+uint32_t FM_GetCounter(t_Handle h_Fm, e_FmCounters counter)
-+{
-+    t_Fm        *p_Fm = (t_Fm*)h_Fm;
-+    t_Error     err;
-+    uint32_t    counterValue;
-+    struct fman_rg       fman_rg;
-+    enum fman_counters fsl_counter;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_Fm, E_INVALID_HANDLE, 0);
-+    SANITY_CHECK_RETURN_VALUE(!p_Fm->p_FmDriverParam, E_INVALID_STATE, 0);
-+
-+    fman_rg.bmi_rg = p_Fm->p_FmBmiRegs;
-+    fman_rg.qmi_rg = p_Fm->p_FmQmiRegs;
-+    fman_rg.fpm_rg = p_Fm->p_FmFpmRegs;
-+    fman_rg.dma_rg = p_Fm->p_FmDmaRegs;
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        !p_Fm->baseAddr &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_FmIpcMsg          msg;
-+        t_FmIpcReply        reply;
-+        uint32_t            replyLength, outCounter;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_GET_COUNTER;
-+        memcpy(msg.msgBody, (uint8_t *)&counter, sizeof(uint32_t));
-+        replyLength = sizeof(uint32_t) + sizeof(uint32_t);
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                     (uint8_t*)&msg,
-+                                     sizeof(msg.msgId) +sizeof(counterValue),
-+                                     (uint8_t*)&reply,
-+                                     &replyLength,
-+                                     NULL,
-+                                     NULL);
-+        if (err != E_OK)
-+        {
-+            REPORT_ERROR(MAJOR, err, NO_MSG);
-+            return 0;
-+        }
-+        if (replyLength != (sizeof(uint32_t) + sizeof(uint32_t)))
-+        {
-+            REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+            return 0;
-+        }
-+
-+        memcpy((uint8_t*)&outCounter, reply.replyBody, sizeof(uint32_t));
-+        return outCounter;
-+    }
-+    else if (!p_Fm->baseAddr)
-+    {
-+        REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Either IPC or 'baseAddress' is required!"));
-+        return 0;
-+    }
-+
-+    /* When applicable (when there is an 'enable counters' bit,
-+    check that counters are enabled */
-+    switch (counter)
-+    {
-+        case (e_FM_COUNTERS_DEQ_1):
-+        case (e_FM_COUNTERS_DEQ_2):
-+        case (e_FM_COUNTERS_DEQ_3):
-+            if ((p_Fm->p_FmStateStruct->revInfo.majorRev == 4) ||
-+                (p_Fm->p_FmStateStruct->revInfo.majorRev >= 6))
-+            {
-+                REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Requested counter not supported"));
-+                return 0;
-+            }
-+        case (e_FM_COUNTERS_ENQ_TOTAL_FRAME):
-+        case (e_FM_COUNTERS_DEQ_TOTAL_FRAME):
-+        case (e_FM_COUNTERS_DEQ_0):
-+        case (e_FM_COUNTERS_DEQ_FROM_DEFAULT):
-+        case (e_FM_COUNTERS_DEQ_FROM_CONTEXT):
-+        case (e_FM_COUNTERS_DEQ_FROM_FD):
-+        case (e_FM_COUNTERS_DEQ_CONFIRM):
-+            if (!(GET_UINT32(p_Fm->p_FmQmiRegs->fmqm_gc) & QMI_CFG_EN_COUNTERS))
-+            {
-+                REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Requested counter was not enabled"));
-+                return 0;
-+            }
-+            break;
-+        default:
-+            break;
-+    }
-+
-+    FMAN_COUNTERS_TRANS(fsl_counter, counter);
-+    return fman_get_counter(&fman_rg, fsl_counter);
-+}
-+
-+t_Error FM_ModifyCounter(t_Handle h_Fm, e_FmCounters counter, uint32_t val)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+    struct fman_rg          fman_rg;
-+    enum fman_counters fsl_counter;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Fm->p_FmDriverParam, E_INVALID_STATE);
-+
-+   fman_rg.bmi_rg = p_Fm->p_FmBmiRegs;
-+   fman_rg.qmi_rg = p_Fm->p_FmQmiRegs;
-+   fman_rg.fpm_rg = p_Fm->p_FmFpmRegs;
-+   fman_rg.dma_rg = p_Fm->p_FmDmaRegs;
-+
-+   FMAN_COUNTERS_TRANS(fsl_counter, counter);
-+   return  (t_Error)fman_modify_counter(&fman_rg, fsl_counter, val);
-+}
-+
-+void FM_SetDmaEmergency(t_Handle h_Fm, e_FmDmaMuramPort muramPort, bool enable)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+    struct fman_dma_regs *dma_rg;
-+
-+    SANITY_CHECK_RETURN(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN(!p_Fm->p_FmDriverParam, E_INVALID_STATE);
-+
-+    dma_rg = p_Fm->p_FmDmaRegs;
-+
-+    fman_set_dma_emergency(dma_rg, !!(muramPort==e_FM_DMA_MURAM_PORT_WRITE), enable);
-+}
-+
-+void FM_SetDmaExtBusPri(t_Handle h_Fm, e_FmDmaExtBusPri pri)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+    struct fman_dma_regs *dma_rg;
-+
-+    SANITY_CHECK_RETURN(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN(!p_Fm->p_FmDriverParam, E_INVALID_STATE);
-+
-+    dma_rg = p_Fm->p_FmDmaRegs;
-+
-+    fman_set_dma_ext_bus_pri(dma_rg, pri);
-+}
-+
-+void FM_GetDmaStatus(t_Handle h_Fm, t_FmDmaStatus *p_FmDmaStatus)
-+{
-+    t_Fm                *p_Fm = (t_Fm*)h_Fm;
-+    uint32_t             dmaStatus;
-+    struct fman_dma_regs *dma_rg;
-+
-+    SANITY_CHECK_RETURN(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN(!p_Fm->p_FmDriverParam, E_INVALID_STATE);
-+
-+    dma_rg = p_Fm->p_FmDmaRegs;
-+
-+    if ((p_Fm->guestId != NCSW_MASTER_ID) &&
-+        !p_Fm->baseAddr &&
-+        p_Fm->h_IpcSessions[0])
-+    {
-+        t_FmIpcDmaStatus    ipcDmaStatus;
-+        t_FmIpcMsg          msg;
-+        t_FmIpcReply        reply;
-+        t_Error             err;
-+        uint32_t            replyLength;
-+
-+        memset(&msg, 0, sizeof(msg));
-+        memset(&reply, 0, sizeof(reply));
-+        msg.msgId = FM_DMA_STAT;
-+        replyLength = sizeof(uint32_t) + sizeof(t_FmIpcDmaStatus);
-+        err = XX_IpcSendMessage(p_Fm->h_IpcSessions[0],
-+                                (uint8_t*)&msg,
-+                                sizeof(msg.msgId),
-+                                (uint8_t*)&reply,
-+                                &replyLength,
-+                                NULL,
-+                                NULL);
-+        if (err != E_OK)
-+        {
-+            REPORT_ERROR(MINOR, err, NO_MSG);
-+            return;
-+        }
-+        if (replyLength != (sizeof(uint32_t) + sizeof(t_FmIpcDmaStatus)))
-+        {
-+            REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("IPC reply length mismatch"));
-+            return;
-+        }
-+        memcpy((uint8_t*)&ipcDmaStatus, reply.replyBody, sizeof(t_FmIpcDmaStatus));
-+
-+        p_FmDmaStatus->cmqNotEmpty = (bool)ipcDmaStatus.boolCmqNotEmpty;            /**< Command queue is not empty */
-+        p_FmDmaStatus->busError = (bool)ipcDmaStatus.boolBusError;                  /**< Bus error occurred */
-+        p_FmDmaStatus->readBufEccError = (bool)ipcDmaStatus.boolReadBufEccError;        /**< Double ECC error on buffer Read */
-+        p_FmDmaStatus->writeBufEccSysError =(bool)ipcDmaStatus.boolWriteBufEccSysError;    /**< Double ECC error on buffer write from system side */
-+        p_FmDmaStatus->writeBufEccFmError = (bool)ipcDmaStatus.boolWriteBufEccFmError;     /**< Double ECC error on buffer write from FM side */
-+        p_FmDmaStatus->singlePortEccError = (bool)ipcDmaStatus.boolSinglePortEccError;     /**< Double ECC error on buffer write from FM side */
-+        return;
-+    }
-+    else if (!p_Fm->baseAddr)
-+    {
-+        REPORT_ERROR(MINOR, E_NOT_SUPPORTED,
-+                     ("Either IPC or 'baseAddress' is required!"));
-+        return;
-+    }
-+
-+    dmaStatus = fman_get_dma_status(dma_rg);
-+
-+    p_FmDmaStatus->cmqNotEmpty = (bool)(dmaStatus & DMA_STATUS_CMD_QUEUE_NOT_EMPTY);
-+    p_FmDmaStatus->busError = (bool)(dmaStatus & DMA_STATUS_BUS_ERR);
-+    if (p_Fm->p_FmStateStruct->revInfo.majorRev >= 6)
-+        p_FmDmaStatus->singlePortEccError = (bool)(dmaStatus & DMA_STATUS_FM_SPDAT_ECC);
-+    else
-+    {
-+        p_FmDmaStatus->readBufEccError = (bool)(dmaStatus & DMA_STATUS_READ_ECC);
-+        p_FmDmaStatus->writeBufEccSysError = (bool)(dmaStatus & DMA_STATUS_SYSTEM_WRITE_ECC);
-+        p_FmDmaStatus->writeBufEccFmError = (bool)(dmaStatus & DMA_STATUS_FM_WRITE_ECC);
-+    }
-+}
-+
-+void FM_Resume(t_Handle h_Fm)
-+{
-+    t_Fm            *p_Fm = (t_Fm*)h_Fm;
-+    struct fman_fpm_regs *fpm_rg;
-+
-+    SANITY_CHECK_RETURN(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN(!p_Fm->p_FmDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    fpm_rg = p_Fm->p_FmFpmRegs;
-+
-+    fman_resume(fpm_rg);
-+}
-+
-+t_Error FM_GetSpecialOperationCoding(t_Handle               h_Fm,
-+                                     fmSpecialOperations_t  spOper,
-+                                     uint8_t                *p_SpOperCoding)
-+{
-+    t_Fm                        *p_Fm = (t_Fm*)h_Fm;
-+    t_FmCtrlCodeRevisionInfo    revInfo;
-+    t_Error                     err;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Fm->p_FmDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_SpOperCoding, E_NULL_POINTER);
-+
-+    if (!spOper)
-+    {
-+        *p_SpOperCoding = 0;
-+        return E_OK;
-+    }
-+
-+    if ((err = FM_GetFmanCtrlCodeRevision(p_Fm, &revInfo)) != E_OK)
-+    {
-+        DBG(WARNING, ("FM in guest-mode without IPC, can't validate firmware revision."));
-+        revInfo.packageRev = IP_OFFLOAD_PACKAGE_NUMBER;
-+    }
-+    else if (!IS_OFFLOAD_PACKAGE(revInfo.packageRev))
-+        RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("Fman ctrl code package"));
-+
-+    switch (spOper)
-+    {
-+        case (FM_SP_OP_CAPWAP_DTLS_DEC):
-+                *p_SpOperCoding = 9;
-+                break;
-+        case (FM_SP_OP_CAPWAP_DTLS_ENC):
-+                *p_SpOperCoding = 10;
-+                break;
-+        case (FM_SP_OP_IPSEC|FM_SP_OP_IPSEC_UPDATE_UDP_LEN|FM_SP_OP_IPSEC_MANIP):
-+        case (FM_SP_OP_IPSEC|FM_SP_OP_IPSEC_UPDATE_UDP_LEN|FM_SP_OP_IPSEC_MANIP|FM_SP_OP_RPD):
-+                *p_SpOperCoding = 5;
-+                break;
-+        case (FM_SP_OP_IPSEC|FM_SP_OP_IPSEC_MANIP):
-+        case (FM_SP_OP_IPSEC|FM_SP_OP_IPSEC_MANIP|FM_SP_OP_RPD):
-+                *p_SpOperCoding = 6;
-+                break;
-+        case (FM_SP_OP_IPSEC|FM_SP_OP_IPSEC_UPDATE_UDP_LEN|FM_SP_OP_RPD):
-+                *p_SpOperCoding = 3;
-+                break;
-+        case (FM_SP_OP_IPSEC|FM_SP_OP_IPSEC_UPDATE_UDP_LEN):
-+                *p_SpOperCoding = 1;
-+                break;
-+        case (FM_SP_OP_IPSEC|FM_SP_OP_IPSEC_UPDATE_UDP_LEN|FM_SP_OP_IPSEC_NO_ETH_HDR):
-+                *p_SpOperCoding = 12;
-+                break;
-+        case (FM_SP_OP_IPSEC|FM_SP_OP_RPD):
-+                *p_SpOperCoding = 4;
-+                break;
-+        case (FM_SP_OP_IPSEC):
-+                *p_SpOperCoding = 2;
-+                break;
-+        case (FM_SP_OP_DCL4C):
-+                *p_SpOperCoding = 7;
-+                break;
-+        case (FM_SP_OP_CLEAR_RPD):
-+                *p_SpOperCoding = 8;
-+                break;
-+        default:
-+            RETURN_ERROR(MINOR, E_INVALID_VALUE, NO_MSG);
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_CtrlMonStart(t_Handle h_Fm)
-+{
-+    t_Fm            *p_Fm = (t_Fm *)h_Fm;
-+    t_FmTrbRegs     *p_MonRegs;
-+    uint8_t         i;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Fm->p_FmDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    WRITE_UINT32(p_Fm->p_FmFpmRegs->fmfp_brkc,
-+                 GET_UINT32(p_Fm->p_FmFpmRegs->fmfp_brkc) | FPM_BRKC_RDBG);
-+
-+    for (i = 0; i < FM_NUM_OF_CTRL; i++)
-+    {
-+        p_MonRegs = (t_FmTrbRegs *)UINT_TO_PTR(p_Fm->baseAddr + FM_MM_TRB(i));
-+
-+        /* Reset control registers */
-+        WRITE_UINT32(p_MonRegs->tcrh, TRB_TCRH_RESET);
-+        WRITE_UINT32(p_MonRegs->tcrl, TRB_TCRL_RESET);
-+
-+        /* Configure: counter #1 counts all stalls in risc - ldsched stall
-+                      counter #2 counts all stalls in risc - other stall*/
-+        WRITE_UINT32(p_MonRegs->tcrl, TRB_TCRL_RESET | TRB_TCRL_UTIL);
-+
-+        /* Enable monitoring */
-+        WRITE_UINT32(p_MonRegs->tcrh, TRB_TCRH_ENABLE_COUNTERS);
-+    }
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_CtrlMonStop(t_Handle h_Fm)
-+{
-+    t_Fm            *p_Fm = (t_Fm *)h_Fm;
-+    t_FmTrbRegs     *p_MonRegs;
-+    uint8_t         i;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Fm->p_FmDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+
-+    for (i = 0; i < FM_NUM_OF_CTRL; i++)
-+    {
-+        p_MonRegs = (t_FmTrbRegs *)UINT_TO_PTR(p_Fm->baseAddr + FM_MM_TRB(i));
-+        WRITE_UINT32(p_MonRegs->tcrh, TRB_TCRH_DISABLE_COUNTERS);
-+    }
-+
-+    WRITE_UINT32(p_Fm->p_FmFpmRegs->fmfp_brkc,
-+                 GET_UINT32(p_Fm->p_FmFpmRegs->fmfp_brkc) & ~FPM_BRKC_RDBG);
-+
-+    return E_OK;
-+}
-+
-+t_Error FM_CtrlMonGetCounters(t_Handle h_Fm, uint8_t fmCtrlIndex, t_FmCtrlMon *p_Mon)
-+{
-+    t_Fm            *p_Fm = (t_Fm *)h_Fm;
-+    t_FmTrbRegs     *p_MonRegs;
-+    uint64_t        clkCnt, utilValue, effValue;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Fm->p_FmDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR((p_Fm->guestId == NCSW_MASTER_ID), E_NOT_SUPPORTED);
-+    SANITY_CHECK_RETURN_ERROR(p_Mon, E_NULL_POINTER);
-+
-+    if (fmCtrlIndex >= FM_NUM_OF_CTRL)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("FM Controller index"));
-+
-+    p_MonRegs = (t_FmTrbRegs *)UINT_TO_PTR(p_Fm->baseAddr + FM_MM_TRB(fmCtrlIndex));
-+
-+    clkCnt = (uint64_t)
-+            ((uint64_t)GET_UINT32(p_MonRegs->tpcch) << 32 | GET_UINT32(p_MonRegs->tpccl));
-+
-+    utilValue = (uint64_t)
-+            ((uint64_t)GET_UINT32(p_MonRegs->tpc1h) << 32 | GET_UINT32(p_MonRegs->tpc1l));
-+
-+    effValue = (uint64_t)
-+            ((uint64_t)GET_UINT32(p_MonRegs->tpc2h) << 32 | GET_UINT32(p_MonRegs->tpc2l));
-+
-+    p_Mon->percentCnt[0] = (uint8_t)div64_u64((clkCnt - utilValue) * 100, clkCnt);
-+    if (clkCnt != utilValue)
-+        p_Mon->percentCnt[1] = (uint8_t)div64_u64(((clkCnt - utilValue) - effValue) * 100, clkCnt - utilValue);
-+    else
-+        p_Mon->percentCnt[1] = 0;
-+
-+    return E_OK;
-+}
-+
-+t_Handle FM_GetMuramHandle(t_Handle h_Fm)
-+{
-+    t_Fm        *p_Fm = (t_Fm*)h_Fm;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_Fm, E_INVALID_HANDLE, NULL);
-+
-+    return (p_Fm->h_FmMuram);
-+}
-+
-+/****************************************************/
-+/*       Hidden-DEBUG Only API                      */
-+/****************************************************/
-+t_Error FM_ForceIntr (t_Handle h_Fm, e_FmExceptions exception)
-+{
-+    t_Fm *p_Fm = (t_Fm*)h_Fm;
-+    enum fman_exceptions fslException;
-+    struct fman_rg fman_rg;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Fm, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(!p_Fm->p_FmDriverParam, E_INVALID_STATE);
-+
-+    fman_rg.bmi_rg = p_Fm->p_FmBmiRegs;
-+    fman_rg.qmi_rg = p_Fm->p_FmQmiRegs;
-+    fman_rg.fpm_rg = p_Fm->p_FmFpmRegs;
-+    fman_rg.dma_rg = p_Fm->p_FmDmaRegs;
-+
-+    switch (exception)
-+    {
-+        case e_FM_EX_QMI_DEQ_FROM_UNKNOWN_PORTID:
-+            if (!(p_Fm->p_FmStateStruct->exceptions & FM_EX_QMI_DEQ_FROM_UNKNOWN_PORTID))
-+                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception is masked"));
-+            break;
-+        case e_FM_EX_QMI_SINGLE_ECC:
-+            if (p_Fm->p_FmStateStruct->revInfo.majorRev >= 6)
-+                 RETURN_ERROR(MAJOR, E_NOT_SUPPORTED, ("e_FM_EX_QMI_SINGLE_ECC not supported on this integration."));
-+
-+            if (!(p_Fm->p_FmStateStruct->exceptions & FM_EX_QMI_SINGLE_ECC))
-+                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception is masked"));
-+            break;
-+        case e_FM_EX_QMI_DOUBLE_ECC:
-+            if (!(p_Fm->p_FmStateStruct->exceptions & FM_EX_QMI_DOUBLE_ECC))
-+                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception is masked"));
-+            break;
-+        case e_FM_EX_BMI_LIST_RAM_ECC:
-+            if (!(p_Fm->p_FmStateStruct->exceptions & FM_EX_BMI_LIST_RAM_ECC))
-+                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception is masked"));
-+            break;
-+        case e_FM_EX_BMI_STORAGE_PROFILE_ECC:
-+            if (!(p_Fm->p_FmStateStruct->exceptions & FM_EX_BMI_STORAGE_PROFILE_ECC))
-+                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception is masked"));
-+            break;
-+        case e_FM_EX_BMI_STATISTICS_RAM_ECC:
-+            if (!(p_Fm->p_FmStateStruct->exceptions & FM_EX_BMI_STATISTICS_RAM_ECC))
-+                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception is masked"));
-+            break;
-+        case e_FM_EX_BMI_DISPATCH_RAM_ECC:
-+            if (!(p_Fm->p_FmStateStruct->exceptions & FM_EX_BMI_DISPATCH_RAM_ECC))
-+                RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception is masked"));
-+            break;
-+        default:
-+            RETURN_ERROR(MINOR, E_NOT_SUPPORTED, ("The selected exception may not be forced"));
-+    }
-+
-+    fslException = FmanExceptionTrans(exception);
-+    fman_force_intr (&fman_rg, fslException);
-+
-+    return E_OK;
-+}
-+
-+t_Handle FmGetPcd(t_Handle h_Fm)
-+{
-+	return ((t_Fm*)h_Fm)->h_Pcd;
-+}
-+#if (DPAA_VERSION >= 11)
-+extern void *g_MemacRegs;
-+void fm_clk_down(void);
-+uint32_t fman_memac_get_event(void *regs, uint32_t ev_mask);
-+void FM_ChangeClock(t_Handle h_Fm, int hardwarePortId)
-+{
-+	int macId;
-+	uint32_t    event, rcr;
-+	t_Fm *p_Fm = (t_Fm*)h_Fm;
-+	rcr = GET_UINT32(p_Fm->p_FmFpmRegs->fm_rcr);
-+	rcr |= 0x04000000;
-+	WRITE_UINT32(p_Fm->p_FmFpmRegs->fm_rcr, rcr);
-+
-+	HW_PORT_ID_TO_SW_PORT_ID(macId, hardwarePortId);
-+	do
-+	{
-+		event = fman_memac_get_event(g_MemacRegs, 0xFFFFFFFF);
-+	} while ((event & 0x00000020) == 0);
-+	fm_clk_down();
-+	rcr = GET_UINT32(p_Fm->p_FmFpmRegs->fm_rcr);
-+	rcr &= ~0x04000000;
-+	WRITE_UINT32(p_Fm->p_FmFpmRegs->fm_rcr, rcr);
-+}
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm.h
-@@ -0,0 +1,648 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm.h
-+
-+ @Description   FM internal structures and definitions.
-+*//***************************************************************************/
-+#ifndef __FM_H
-+#define __FM_H
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+#include "fm_ext.h"
-+#include "fm_ipc.h"
-+
-+#include "fsl_fman.h"
-+
-+#define __ERR_MODULE__  MODULE_FM
-+
-+#define FM_MAX_NUM_OF_HW_PORT_IDS           64
-+#define FM_MAX_NUM_OF_GUESTS                100
-+
-+/**************************************************************************//**
-+ @Description       Exceptions
-+*//***************************************************************************/
-+#define FM_EX_DMA_BUS_ERROR                 0x80000000      /**< DMA bus error. */
-+#define FM_EX_DMA_READ_ECC                  0x40000000
-+#define FM_EX_DMA_SYSTEM_WRITE_ECC          0x20000000
-+#define FM_EX_DMA_FM_WRITE_ECC              0x10000000
-+#define FM_EX_FPM_STALL_ON_TASKS            0x08000000      /**< Stall of tasks on FPM */
-+#define FM_EX_FPM_SINGLE_ECC                0x04000000      /**< Single ECC on FPM */
-+#define FM_EX_FPM_DOUBLE_ECC                0x02000000
-+#define FM_EX_QMI_SINGLE_ECC                0x01000000      /**< Single ECC on FPM */
-+#define FM_EX_QMI_DEQ_FROM_UNKNOWN_PORTID   0x00800000      /**< Dequeu from default queue id */
-+#define FM_EX_QMI_DOUBLE_ECC                0x00400000
-+#define FM_EX_BMI_LIST_RAM_ECC              0x00200000
-+#define FM_EX_BMI_STORAGE_PROFILE_ECC       0x00100000
-+#define FM_EX_BMI_STATISTICS_RAM_ECC        0x00080000
-+#define FM_EX_IRAM_ECC                      0x00040000
-+#define FM_EX_MURAM_ECC                     0x00020000
-+#define FM_EX_BMI_DISPATCH_RAM_ECC          0x00010000
-+#define FM_EX_DMA_SINGLE_PORT_ECC           0x00008000
-+
-+#define DMA_EMSR_EMSTR_MASK                 0x0000FFFF
-+
-+#define DMA_THRESH_COMMQ_MASK               0xFF000000
-+#define DMA_THRESH_READ_INT_BUF_MASK        0x007F0000
-+#define DMA_THRESH_WRITE_INT_BUF_MASK       0x0000007F
-+
-+#define GET_EXCEPTION_FLAG(bitMask, exception)              \
-+switch (exception){                                         \
-+    case e_FM_EX_DMA_BUS_ERROR:                             \
-+        bitMask = FM_EX_DMA_BUS_ERROR; break;               \
-+    case e_FM_EX_DMA_SINGLE_PORT_ECC:                       \
-+        bitMask = FM_EX_DMA_SINGLE_PORT_ECC; break;         \
-+    case e_FM_EX_DMA_READ_ECC:                              \
-+        bitMask = FM_EX_DMA_READ_ECC; break;                \
-+    case e_FM_EX_DMA_SYSTEM_WRITE_ECC:                      \
-+        bitMask = FM_EX_DMA_SYSTEM_WRITE_ECC; break;        \
-+    case e_FM_EX_DMA_FM_WRITE_ECC:                          \
-+        bitMask = FM_EX_DMA_FM_WRITE_ECC; break;            \
-+    case e_FM_EX_FPM_STALL_ON_TASKS:                        \
-+        bitMask = FM_EX_FPM_STALL_ON_TASKS; break;          \
-+    case e_FM_EX_FPM_SINGLE_ECC:                            \
-+        bitMask = FM_EX_FPM_SINGLE_ECC; break;              \
-+    case e_FM_EX_FPM_DOUBLE_ECC:                            \
-+        bitMask = FM_EX_FPM_DOUBLE_ECC; break;              \
-+    case e_FM_EX_QMI_SINGLE_ECC:                            \
-+        bitMask = FM_EX_QMI_SINGLE_ECC; break;              \
-+    case e_FM_EX_QMI_DOUBLE_ECC:                            \
-+        bitMask = FM_EX_QMI_DOUBLE_ECC; break;              \
-+    case e_FM_EX_QMI_DEQ_FROM_UNKNOWN_PORTID:               \
-+        bitMask = FM_EX_QMI_DEQ_FROM_UNKNOWN_PORTID; break; \
-+    case e_FM_EX_BMI_LIST_RAM_ECC:                          \
-+        bitMask = FM_EX_BMI_LIST_RAM_ECC; break;            \
-+    case e_FM_EX_BMI_STORAGE_PROFILE_ECC:                   \
-+        bitMask = FM_EX_BMI_STORAGE_PROFILE_ECC; break;     \
-+    case e_FM_EX_BMI_STATISTICS_RAM_ECC:                    \
-+        bitMask = FM_EX_BMI_STATISTICS_RAM_ECC; break;      \
-+    case e_FM_EX_BMI_DISPATCH_RAM_ECC:                      \
-+        bitMask = FM_EX_BMI_DISPATCH_RAM_ECC; break;        \
-+    case e_FM_EX_IRAM_ECC:                                  \
-+        bitMask = FM_EX_IRAM_ECC; break;                    \
-+    case e_FM_EX_MURAM_ECC:                                 \
-+        bitMask = FM_EX_MURAM_ECC; break;                   \
-+    default: bitMask = 0;break;                             \
-+}
-+
-+#define GET_FM_MODULE_EVENT(_mod, _id, _intrType, _event)                                           \
-+    switch (_mod) {                                                                                 \
-+        case e_FM_MOD_PRS:                                                                          \
-+            if (_id) _event = e_FM_EV_DUMMY_LAST;                                                   \
-+            else _event = (_intrType == e_FM_INTR_TYPE_ERR) ? e_FM_EV_ERR_PRS : e_FM_EV_PRS;        \
-+            break;                                                                                  \
-+        case e_FM_MOD_KG:                                                                           \
-+            if (_id) _event = e_FM_EV_DUMMY_LAST;                                                   \
-+            else _event = (_intrType == e_FM_INTR_TYPE_ERR) ? e_FM_EV_ERR_KG : e_FM_EV_DUMMY_LAST;  \
-+            break;                                                                                  \
-+        case e_FM_MOD_PLCR:                                                                         \
-+            if (_id) _event = e_FM_EV_DUMMY_LAST;                                                   \
-+            else _event = (_intrType == e_FM_INTR_TYPE_ERR) ? e_FM_EV_ERR_PLCR : e_FM_EV_PLCR;      \
-+            break;                                                                                  \
-+        case e_FM_MOD_TMR:                                                                          \
-+            if (_id) _event = e_FM_EV_DUMMY_LAST;                                                   \
-+            else _event = (_intrType == e_FM_INTR_TYPE_ERR) ? e_FM_EV_DUMMY_LAST : e_FM_EV_TMR;     \
-+            break;                                                                                  \
-+        case e_FM_MOD_10G_MAC:                                                                      \
-+            if (_id >= FM_MAX_NUM_OF_10G_MACS) _event = e_FM_EV_DUMMY_LAST;                         \
-+            else _event = (_intrType == e_FM_INTR_TYPE_ERR) ? (e_FM_EV_ERR_10G_MAC0 + _id) : (e_FM_EV_10G_MAC0 + _id); \
-+            break;                                                                                  \
-+        case e_FM_MOD_1G_MAC:                                                                       \
-+            if (_id >= FM_MAX_NUM_OF_1G_MACS) _event = e_FM_EV_DUMMY_LAST;                          \
-+            else _event = (_intrType == e_FM_INTR_TYPE_ERR) ? (e_FM_EV_ERR_1G_MAC0 + _id) : (e_FM_EV_1G_MAC0 + _id); \
-+            break;                                                                                  \
-+        case e_FM_MOD_MACSEC:                                                                       \
-+            switch (_id){                                                                           \
-+                 case (0): _event = (_intrType == e_FM_INTR_TYPE_ERR) ? e_FM_EV_ERR_MACSEC_MAC0:e_FM_EV_MACSEC_MAC0; \
-+                 break;                                                                             \
-+                 }                                                                                  \
-+            break;                                                                                  \
-+        case e_FM_MOD_FMAN_CTRL:                                                                    \
-+            if (_intrType == e_FM_INTR_TYPE_ERR) _event = e_FM_EV_DUMMY_LAST;                       \
-+            else _event = (e_FM_EV_FMAN_CTRL_0 + _id);                                              \
-+            break;                                                                                  \
-+        default: _event = e_FM_EV_DUMMY_LAST;                                                       \
-+        break;                                                                                      \
-+    }
-+
-+#define FMAN_CACHE_OVERRIDE_TRANS(fsl_cache_override, _cache_override) \
-+    switch (_cache_override){ \
-+        case  e_FM_DMA_NO_CACHE_OR:                    \
-+            fsl_cache_override =  E_FMAN_DMA_NO_CACHE_OR; break;    \
-+        case  e_FM_DMA_NO_STASH_DATA:                    \
-+            fsl_cache_override =  E_FMAN_DMA_NO_STASH_DATA; break;        \
-+        case  e_FM_DMA_MAY_STASH_DATA:                    \
-+            fsl_cache_override =  E_FMAN_DMA_MAY_STASH_DATA; break;    \
-+        case  e_FM_DMA_STASH_DATA:                        \
-+            fsl_cache_override =  E_FMAN_DMA_STASH_DATA; break;        \
-+        default: \
-+            fsl_cache_override =  E_FMAN_DMA_NO_CACHE_OR; break;    \
-+    }
-+
-+#define FMAN_AID_MODE_TRANS(fsl_aid_mode, _aid_mode) \
-+    switch (_aid_mode){ \
-+        case  e_FM_DMA_AID_OUT_PORT_ID:                    \
-+            fsl_aid_mode =  E_FMAN_DMA_AID_OUT_PORT_ID; break;    \
-+        case  e_FM_DMA_AID_OUT_TNUM:                    \
-+            fsl_aid_mode =  E_FMAN_DMA_AID_OUT_TNUM; break;        \
-+        default: \
-+            fsl_aid_mode =  E_FMAN_DMA_AID_OUT_PORT_ID; break;    \
-+    }
-+
-+#define FMAN_DMA_DBG_CNT_TRANS(fsl_dma_dbg_cnt, _dma_dbg_cnt) \
-+    switch (_dma_dbg_cnt){ \
-+        case  e_FM_DMA_DBG_NO_CNT:                    \
-+            fsl_dma_dbg_cnt =  E_FMAN_DMA_DBG_NO_CNT; break;    \
-+        case  e_FM_DMA_DBG_CNT_DONE:                    \
-+            fsl_dma_dbg_cnt =  E_FMAN_DMA_DBG_CNT_DONE; break;        \
-+        case  e_FM_DMA_DBG_CNT_COMM_Q_EM:                    \
-+            fsl_dma_dbg_cnt =  E_FMAN_DMA_DBG_CNT_COMM_Q_EM; break;    \
-+        case  e_FM_DMA_DBG_CNT_INT_READ_EM:                        \
-+            fsl_dma_dbg_cnt =  E_FMAN_DMA_DBG_CNT_INT_READ_EM; break;        \
-+        case  e_FM_DMA_DBG_CNT_INT_WRITE_EM:                        \
-+            fsl_dma_dbg_cnt = E_FMAN_DMA_DBG_CNT_INT_WRITE_EM ; break;        \
-+        case  e_FM_DMA_DBG_CNT_FPM_WAIT:                        \
-+            fsl_dma_dbg_cnt = E_FMAN_DMA_DBG_CNT_FPM_WAIT ; break;        \
-+        case  e_FM_DMA_DBG_CNT_SIGLE_BIT_ECC:                        \
-+            fsl_dma_dbg_cnt = E_FMAN_DMA_DBG_CNT_SIGLE_BIT_ECC ; break;        \
-+        case  e_FM_DMA_DBG_CNT_RAW_WAR_PROT:                        \
-+            fsl_dma_dbg_cnt = E_FMAN_DMA_DBG_CNT_RAW_WAR_PROT ; break;        \
-+        default: \
-+            fsl_dma_dbg_cnt =  E_FMAN_DMA_DBG_NO_CNT; break;    \
-+    }
-+
-+#define FMAN_DMA_EMER_TRANS(fsl_dma_emer, _dma_emer) \
-+    switch (_dma_emer){ \
-+        case  e_FM_DMA_EM_EBS:                    \
-+            fsl_dma_emer =  E_FMAN_DMA_EM_EBS; break;    \
-+        case  e_FM_DMA_EM_SOS:                    \
-+            fsl_dma_emer =  E_FMAN_DMA_EM_SOS; break;        \
-+        default: \
-+            fsl_dma_emer =  E_FMAN_DMA_EM_EBS; break;    \
-+    }
-+
-+#define FMAN_DMA_ERR_TRANS(fsl_dma_err, _dma_err) \
-+    switch (_dma_err){ \
-+        case  e_FM_DMA_ERR_CATASTROPHIC:                    \
-+            fsl_dma_err =  E_FMAN_DMA_ERR_CATASTROPHIC; break;    \
-+        case  e_FM_DMA_ERR_REPORT:                    \
-+            fsl_dma_err =  E_FMAN_DMA_ERR_REPORT; break;        \
-+        default: \
-+            fsl_dma_err =  E_FMAN_DMA_ERR_CATASTROPHIC; break;    \
-+    }
-+
-+#define FMAN_CATASTROPHIC_ERR_TRANS(fsl_catastrophic_err, _catastrophic_err) \
-+    switch (_catastrophic_err){ \
-+        case  e_FM_CATASTROPHIC_ERR_STALL_PORT:                    \
-+            fsl_catastrophic_err =  E_FMAN_CATAST_ERR_STALL_PORT; break;    \
-+        case  e_FM_CATASTROPHIC_ERR_STALL_TASK:                    \
-+            fsl_catastrophic_err =  E_FMAN_CATAST_ERR_STALL_TASK; break;        \
-+        default: \
-+            fsl_catastrophic_err =  E_FMAN_CATAST_ERR_STALL_PORT; break;    \
-+    }
-+
-+#define FMAN_COUNTERS_TRANS(fsl_counters, _counters) \
-+    switch (_counters){ \
-+        case  e_FM_COUNTERS_ENQ_TOTAL_FRAME:                    \
-+            fsl_counters =  E_FMAN_COUNTERS_ENQ_TOTAL_FRAME; break;    \
-+        case  e_FM_COUNTERS_DEQ_TOTAL_FRAME:                    \
-+            fsl_counters =  E_FMAN_COUNTERS_DEQ_TOTAL_FRAME; break;        \
-+        case  e_FM_COUNTERS_DEQ_0:                    \
-+            fsl_counters =  E_FMAN_COUNTERS_DEQ_0; break;    \
-+        case  e_FM_COUNTERS_DEQ_1:                    \
-+            fsl_counters =  E_FMAN_COUNTERS_DEQ_1; break;        \
-+        case  e_FM_COUNTERS_DEQ_2:                    \
-+            fsl_counters =  E_FMAN_COUNTERS_DEQ_2; break;    \
-+        case  e_FM_COUNTERS_DEQ_3:                    \
-+            fsl_counters =  E_FMAN_COUNTERS_DEQ_3; break;        \
-+        case  e_FM_COUNTERS_DEQ_FROM_DEFAULT:                    \
-+            fsl_counters =  E_FMAN_COUNTERS_DEQ_FROM_DEFAULT; break;    \
-+        case  e_FM_COUNTERS_DEQ_FROM_CONTEXT:                    \
-+            fsl_counters =  E_FMAN_COUNTERS_DEQ_FROM_CONTEXT; break;        \
-+        case  e_FM_COUNTERS_DEQ_FROM_FD:                    \
-+            fsl_counters =  E_FMAN_COUNTERS_DEQ_FROM_FD; break;    \
-+        case  e_FM_COUNTERS_DEQ_CONFIRM:                    \
-+            fsl_counters =  E_FMAN_COUNTERS_DEQ_CONFIRM; break;        \
-+        default: \
-+            fsl_counters =  E_FMAN_COUNTERS_ENQ_TOTAL_FRAME; break;    \
-+    }
-+
-+/**************************************************************************//**
-+ @Description       defaults
-+*//***************************************************************************/
-+#define DEFAULT_exceptions                 (FM_EX_DMA_BUS_ERROR            |\
-+                                            FM_EX_DMA_READ_ECC              |\
-+                                            FM_EX_DMA_SYSTEM_WRITE_ECC      |\
-+                                            FM_EX_DMA_FM_WRITE_ECC          |\
-+                                            FM_EX_FPM_STALL_ON_TASKS        |\
-+                                            FM_EX_FPM_SINGLE_ECC            |\
-+                                            FM_EX_FPM_DOUBLE_ECC            |\
-+                                            FM_EX_QMI_DEQ_FROM_UNKNOWN_PORTID|\
-+                                            FM_EX_BMI_LIST_RAM_ECC          |\
-+                                            FM_EX_BMI_STORAGE_PROFILE_ECC   |\
-+                                            FM_EX_BMI_STATISTICS_RAM_ECC    |\
-+                                            FM_EX_IRAM_ECC                  |\
-+                                            FM_EX_MURAM_ECC                 |\
-+                                            FM_EX_BMI_DISPATCH_RAM_ECC      |\
-+                                            FM_EX_QMI_DOUBLE_ECC            |\
-+                                            FM_EX_QMI_SINGLE_ECC)
-+
-+#define DEFAULT_eccEnable                   FALSE
-+#ifdef FM_PEDANTIC_DMA
-+#define DEFAULT_aidOverride                 TRUE
-+#else
-+#define DEFAULT_aidOverride                 FALSE
-+#endif /* FM_PEDANTIC_DMA */
-+#define DEFAULT_aidMode                     e_FM_DMA_AID_OUT_TNUM
-+#define DEFAULT_dmaStopOnBusError           FALSE
-+#define DEFAULT_stopAtBusError              FALSE
-+#define DEFAULT_axiDbgNumOfBeats            1
-+#define DEFAULT_dmaReadIntBufLow            ((DMA_THRESH_MAX_BUF+1)/2)
-+#define DEFAULT_dmaReadIntBufHigh           ((DMA_THRESH_MAX_BUF+1)*3/4)
-+#define DEFAULT_dmaWriteIntBufLow           ((DMA_THRESH_MAX_BUF+1)/2)
-+#define DEFAULT_dmaWriteIntBufHigh          ((DMA_THRESH_MAX_BUF+1)*3/4)
-+#define DEFAULT_catastrophicErr             e_FM_CATASTROPHIC_ERR_STALL_PORT
-+#define DEFAULT_dmaErr                      e_FM_DMA_ERR_CATASTROPHIC
-+#define DEFAULT_resetOnInit                 FALSE
-+#define DEFAULT_resetOnInitOverrideCallback NULL
-+#define DEFAULT_haltOnExternalActivation    FALSE   /* do not change! if changed, must be disabled for rev1 ! */
-+#define DEFAULT_haltOnUnrecoverableEccError FALSE   /* do not change! if changed, must be disabled for rev1 ! */
-+#define DEFAULT_externalEccRamsEnable       FALSE
-+#define DEFAULT_VerifyUcode                 FALSE
-+
-+#if (DPAA_VERSION < 11)
-+#define DEFAULT_totalFifoSize(major, minor)     \
-+    (((major == 2) || (major == 5)) ?           \
-+     (100*KILOBYTE) : ((major == 4) ?           \
-+     (49*KILOBYTE) : (122*KILOBYTE)))
-+#define DEFAULT_totalNumOfTasks(major, minor)   \
-+            BMI_MAX_NUM_OF_TASKS
-+
-+#define DEFAULT_dmaCommQLow                 ((DMA_THRESH_MAX_COMMQ+1)/2)
-+#define DEFAULT_dmaCommQHigh                ((DMA_THRESH_MAX_COMMQ+1)*3/4)
-+#define DEFAULT_cacheOverride               e_FM_DMA_NO_CACHE_OR
-+#define DEFAULT_dmaCamNumOfEntries          32
-+#define DEFAULT_dmaDbgCntMode               e_FM_DMA_DBG_NO_CNT
-+#define DEFAULT_dmaEnEmergency              FALSE
-+#define DEFAULT_dmaSosEmergency             0
-+#define DEFAULT_dmaWatchdog                 0 /* disabled */
-+#define DEFAULT_dmaEnEmergencySmoother      FALSE
-+#define DEFAULT_dmaEmergencySwitchCounter   0
-+
-+#define DEFAULT_dispLimit                   0
-+#define DEFAULT_prsDispTh                   16
-+#define DEFAULT_plcrDispTh                  16
-+#define DEFAULT_kgDispTh                    16
-+#define DEFAULT_bmiDispTh                   16
-+#define DEFAULT_qmiEnqDispTh                16
-+#define DEFAULT_qmiDeqDispTh                16
-+#define DEFAULT_fmCtl1DispTh                16
-+#define DEFAULT_fmCtl2DispTh                16
-+
-+#else  /* (DPAA_VERSION < 11) */
-+/* Defaults are registers' reset values */
-+#define DEFAULT_totalFifoSize(major, minor)			\
-+	(((major == 6) && ((minor == 1) || (minor == 4))) ?	\
-+	(156*KILOBYTE) : (295*KILOBYTE))
-+
-+/* According to the default value of FMBM_CFG2[TNTSKS] */
-+#define DEFAULT_totalNumOfTasks(major, minor)   \
-+      (((major == 6) && ((minor == 1) || (minor == 4))) ? 59 : 124)
-+
-+#define DEFAULT_dmaCommQLow                 0x2A
-+#define DEFAULT_dmaCommQHigh                0x3F
-+#define DEFAULT_cacheOverride               e_FM_DMA_NO_CACHE_OR
-+#define DEFAULT_dmaCamNumOfEntries          64
-+#define DEFAULT_dmaDbgCntMode               e_FM_DMA_DBG_NO_CNT
-+#define DEFAULT_dmaEnEmergency              FALSE
-+#define DEFAULT_dmaSosEmergency             0
-+#define DEFAULT_dmaWatchdog                 0 /* disabled */
-+#define DEFAULT_dmaEnEmergencySmoother      FALSE
-+#define DEFAULT_dmaEmergencySwitchCounter   0
-+
-+#define DEFAULT_dispLimit                   0
-+#define DEFAULT_prsDispTh                   16
-+#define DEFAULT_plcrDispTh                  16
-+#define DEFAULT_kgDispTh                    16
-+#define DEFAULT_bmiDispTh                   16
-+#define DEFAULT_qmiEnqDispTh                16
-+#define DEFAULT_qmiDeqDispTh                16
-+#define DEFAULT_fmCtl1DispTh                16
-+#define DEFAULT_fmCtl2DispTh                16
-+#endif /* (DPAA_VERSION < 11) */
-+
-+#define FM_TIMESTAMP_1_USEC_BIT             8
-+
-+/**************************************************************************//**
-+ @Collection   Defines used for enabling/disabling FM interrupts
-+ @{
-+*//***************************************************************************/
-+#define ERR_INTR_EN_DMA         0x00010000
-+#define ERR_INTR_EN_FPM         0x80000000
-+#define ERR_INTR_EN_BMI         0x00800000
-+#define ERR_INTR_EN_QMI         0x00400000
-+#define ERR_INTR_EN_PRS         0x00200000
-+#define ERR_INTR_EN_KG          0x00100000
-+#define ERR_INTR_EN_PLCR        0x00080000
-+#define ERR_INTR_EN_MURAM       0x00040000
-+#define ERR_INTR_EN_IRAM        0x00020000
-+#define ERR_INTR_EN_10G_MAC0    0x00008000
-+#define ERR_INTR_EN_10G_MAC1    0x00000040
-+#define ERR_INTR_EN_1G_MAC0     0x00004000
-+#define ERR_INTR_EN_1G_MAC1     0x00002000
-+#define ERR_INTR_EN_1G_MAC2     0x00001000
-+#define ERR_INTR_EN_1G_MAC3     0x00000800
-+#define ERR_INTR_EN_1G_MAC4     0x00000400
-+#define ERR_INTR_EN_1G_MAC5     0x00000200
-+#define ERR_INTR_EN_1G_MAC6     0x00000100
-+#define ERR_INTR_EN_1G_MAC7     0x00000080
-+#define ERR_INTR_EN_MACSEC_MAC0 0x00000001
-+
-+#define INTR_EN_QMI             0x40000000
-+#define INTR_EN_PRS             0x20000000
-+#define INTR_EN_WAKEUP          0x10000000
-+#define INTR_EN_PLCR            0x08000000
-+#define INTR_EN_1G_MAC0         0x00080000
-+#define INTR_EN_1G_MAC1         0x00040000
-+#define INTR_EN_1G_MAC2         0x00020000
-+#define INTR_EN_1G_MAC3         0x00010000
-+#define INTR_EN_1G_MAC4         0x00000040
-+#define INTR_EN_1G_MAC5         0x00000020
-+#define INTR_EN_1G_MAC6         0x00000008
-+#define INTR_EN_1G_MAC7         0x00000002
-+#define INTR_EN_10G_MAC0        0x00200000
-+#define INTR_EN_10G_MAC1        0x00100000
-+#define INTR_EN_REV0            0x00008000
-+#define INTR_EN_REV1            0x00004000
-+#define INTR_EN_REV2            0x00002000
-+#define INTR_EN_REV3            0x00001000
-+#define INTR_EN_BRK             0x00000080
-+#define INTR_EN_TMR             0x01000000
-+#define INTR_EN_MACSEC_MAC0     0x00000001
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Description       Memory Mapped Registers
-+*//***************************************************************************/
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(push,1)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+typedef struct
-+{
-+    volatile uint32_t   iadd;           /**< FM IRAM instruction address register */
-+    volatile uint32_t   idata;          /**< FM IRAM instruction data register */
-+    volatile uint32_t   itcfg;          /**< FM IRAM timing config register */
-+    volatile uint32_t   iready;         /**< FM IRAM ready register */
-+    volatile uint32_t   res[0x1FFFC];
-+} t_FMIramRegs;
-+
-+/* Trace buffer registers -
-+   each FM Controller has its own trace buffer residing at FM_MM_TRB(fmCtrlIndex) offset */
-+typedef struct t_FmTrbRegs
-+{
-+    volatile uint32_t   tcrh;
-+    volatile uint32_t   tcrl;
-+    volatile uint32_t   tesr;
-+    volatile uint32_t   tecr0h;
-+    volatile uint32_t   tecr0l;
-+    volatile uint32_t   terf0h;
-+    volatile uint32_t   terf0l;
-+    volatile uint32_t   tecr1h;
-+    volatile uint32_t   tecr1l;
-+    volatile uint32_t   terf1h;
-+    volatile uint32_t   terf1l;
-+    volatile uint32_t   tpcch;
-+    volatile uint32_t   tpccl;
-+    volatile uint32_t   tpc1h;
-+    volatile uint32_t   tpc1l;
-+    volatile uint32_t   tpc2h;
-+    volatile uint32_t   tpc2l;
-+    volatile uint32_t   twdimr;
-+    volatile uint32_t   twicvr;
-+    volatile uint32_t   tar;
-+    volatile uint32_t   tdr;
-+    volatile uint32_t   tsnum1;
-+    volatile uint32_t   tsnum2;
-+    volatile uint32_t   tsnum3;
-+    volatile uint32_t   tsnum4;
-+} t_FmTrbRegs;
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+/**************************************************************************//**
-+ @Description       General defines
-+*//***************************************************************************/
-+#define FM_DEBUG_STATUS_REGISTER_OFFSET     0x000d1084UL
-+#define FM_FW_DEBUG_INSTRUCTION             0x6ffff805UL
-+
-+/**************************************************************************//**
-+ @Description       FPM defines
-+*//***************************************************************************/
-+/* masks */
-+#define FPM_BRKC_RDBG                   0x00000200
-+#define FPM_BRKC_SLP                    0x00000800
-+/**************************************************************************//**
-+ @Description       BMI defines
-+*//***************************************************************************/
-+/* masks */
-+#define BMI_INIT_START                      0x80000000
-+#define BMI_ERR_INTR_EN_STORAGE_PROFILE_ECC 0x80000000
-+#define BMI_ERR_INTR_EN_LIST_RAM_ECC        0x40000000
-+#define BMI_ERR_INTR_EN_STATISTICS_RAM_ECC  0x20000000
-+#define BMI_ERR_INTR_EN_DISPATCH_RAM_ECC    0x10000000
-+/**************************************************************************//**
-+ @Description       QMI defines
-+*//***************************************************************************/
-+/* masks */
-+#define QMI_ERR_INTR_EN_DOUBLE_ECC      0x80000000
-+#define QMI_ERR_INTR_EN_DEQ_FROM_DEF    0x40000000
-+#define QMI_INTR_EN_SINGLE_ECC          0x80000000
-+
-+/**************************************************************************//**
-+ @Description       IRAM defines
-+*//***************************************************************************/
-+/* masks */
-+#define IRAM_IADD_AIE                   0x80000000
-+#define IRAM_READY                      0x80000000
-+
-+/**************************************************************************//**
-+ @Description       TRB defines
-+*//***************************************************************************/
-+/* masks */
-+#define TRB_TCRH_RESET              0x04000000
-+#define TRB_TCRH_ENABLE_COUNTERS    0x84008000
-+#define TRB_TCRH_DISABLE_COUNTERS   0x8400C000
-+#define TRB_TCRL_RESET              0x20000000
-+#define TRB_TCRL_UTIL               0x00000460
-+typedef struct {
-+    void        (*f_Isr) (t_Handle h_Arg, uint32_t event);
-+    t_Handle    h_SrcHandle;
-+} t_FmanCtrlIntrSrc;
-+
-+
-+typedef void (t_FmanCtrlIsr)( t_Handle h_Fm, uint32_t event);
-+
-+typedef struct
-+{
-+/***************************/
-+/* Master/Guest parameters */
-+/***************************/
-+    uint8_t                     fmId;
-+    e_FmPortType                portsTypes[FM_MAX_NUM_OF_HW_PORT_IDS];
-+    uint16_t                    fmClkFreq;
-+    uint16_t                    fmMacClkFreq;
-+    t_FmRevisionInfo            revInfo;
-+/**************************/
-+/* Master Only parameters */
-+/**************************/
-+    bool                        enabledTimeStamp;
-+    uint8_t                     count1MicroBit;
-+    uint8_t                     totalNumOfTasks;
-+    uint32_t                    totalFifoSize;
-+    uint8_t                     maxNumOfOpenDmas;
-+    uint8_t                     accumulatedNumOfTasks;
-+    uint32_t                    accumulatedFifoSize;
-+    uint8_t                     accumulatedNumOfOpenDmas;
-+    uint8_t                     accumulatedNumOfDeqTnums;
-+#ifdef FM_LOW_END_RESTRICTION
-+    bool                        lowEndRestriction;
-+#endif /* FM_LOW_END_RESTRICTION */
-+    uint32_t                    exceptions;
-+    int                         irq;
-+    int                         errIrq;
-+    bool                        ramsEccEnable;
-+    bool                        explicitEnable;
-+    bool                        internalCall;
-+    uint8_t                     ramsEccOwners;
-+    uint32_t                    extraFifoPoolSize;
-+    uint8_t                     extraTasksPoolSize;
-+    uint8_t                     extraOpenDmasPoolSize;
-+#if defined(FM_MAX_NUM_OF_10G_MACS) && (FM_MAX_NUM_OF_10G_MACS)
-+    uint16_t                    portMaxFrameLengths10G[FM_MAX_NUM_OF_10G_MACS];
-+    uint16_t                    macMaxFrameLengths10G[FM_MAX_NUM_OF_10G_MACS];
-+#endif /* defined(FM_MAX_NUM_OF_10G_MACS) && ... */
-+    uint16_t                    portMaxFrameLengths1G[FM_MAX_NUM_OF_1G_MACS];
-+    uint16_t                    macMaxFrameLengths1G[FM_MAX_NUM_OF_1G_MACS];
-+} t_FmStateStruct;
-+
-+#if (DPAA_VERSION >= 11)
-+typedef struct t_FmMapParam {
-+    uint16_t        profilesBase;
-+    uint16_t        numOfProfiles;
-+    t_Handle        h_FmPort;
-+} t_FmMapParam;
-+
-+typedef struct t_FmAllocMng {
-+    bool            allocated;
-+    uint8_t         ownerId; /* guestId for KG in multi-partition only,
-+                                portId for PLCR in any environment */
-+} t_FmAllocMng;
-+
-+typedef struct t_FmPcdSpEntry {
-+    bool            valid;
-+    t_FmAllocMng    profilesMng;
-+} t_FmPcdSpEntry;
-+
-+typedef struct t_FmSp {
-+    void            *p_FmPcdStoragePrflRegs;
-+    t_FmPcdSpEntry  profiles[FM_VSP_MAX_NUM_OF_ENTRIES];
-+    t_FmMapParam    portsMapping[FM_MAX_NUM_OF_PORTS];
-+} t_FmSp;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+typedef struct t_Fm
-+{
-+/***************************/
-+/* Master/Guest parameters */
-+/***************************/
-+/* locals for recovery */
-+    uintptr_t                   baseAddr;
-+
-+/* un-needed for recovery */
-+    t_Handle                    h_Pcd;
-+    char                        fmModuleName[MODULE_NAME_SIZE];
-+    char                        fmIpcHandlerModuleName[FM_MAX_NUM_OF_GUESTS][MODULE_NAME_SIZE];
-+    t_Handle                    h_IpcSessions[FM_MAX_NUM_OF_GUESTS];
-+    t_FmIntrSrc                 intrMng[e_FM_EV_DUMMY_LAST];    /* FM exceptions user callback */
-+    uint8_t                     guestId;
-+/**************************/
-+/* Master Only parameters */
-+/**************************/
-+/* locals for recovery */
-+    struct fman_fpm_regs *p_FmFpmRegs;
-+    struct fman_bmi_regs *p_FmBmiRegs;
-+    struct fman_qmi_regs *p_FmQmiRegs;
-+    struct fman_dma_regs *p_FmDmaRegs;
-+    struct fman_regs            *p_FmRegs;
-+    t_FmExceptionsCallback      *f_Exception;
-+    t_FmBusErrorCallback        *f_BusError;
-+    t_Handle                    h_App;                          /* Application handle */
-+    t_Handle                    h_Spinlock;
-+    bool                        recoveryMode;
-+    t_FmStateStruct             *p_FmStateStruct;
-+    uint16_t                    tnumAgingPeriod;
-+#if (DPAA_VERSION >= 11)
-+    t_FmSp                      *p_FmSp;
-+    uint8_t                     partNumOfVSPs;
-+    uint8_t                     partVSPBase;
-+    uintptr_t                   vspBaseAddr;
-+#endif /* (DPAA_VERSION >= 11) */
-+    bool                        portsPreFetchConfigured[FM_MAX_NUM_OF_HW_PORT_IDS]; /* Prefetch configration per Tx-port */
-+    bool                        portsPreFetchValue[FM_MAX_NUM_OF_HW_PORT_IDS];      /* Prefetch configration per Tx-port */
-+
-+/* un-needed for recovery */
-+    struct fman_cfg             *p_FmDriverParam;
-+    t_Handle                    h_FmMuram;
-+    uint64_t                    fmMuramPhysBaseAddr;
-+    bool                        independentMode;
-+    bool                        hcPortInitialized;
-+    uintptr_t                   camBaseAddr;                    /* save for freeing */
-+    uintptr_t                   resAddr;
-+    uintptr_t                   fifoBaseAddr;                   /* save for freeing */
-+    t_FmanCtrlIntrSrc           fmanCtrlIntr[FM_NUM_OF_FMAN_CTRL_EVENT_REGS];    /* FM exceptions user callback */
-+    bool                        usedEventRegs[FM_NUM_OF_FMAN_CTRL_EVENT_REGS];
-+    t_FmFirmwareParams          firmware;
-+    bool                        fwVerify;
-+    bool                        resetOnInit;
-+    t_FmResetOnInitOverrideCallback     *f_ResetOnInitOverride;
-+    uint32_t                    userSetExceptions;
-+} t_Fm;
-+
-+
-+#endif /* __FM_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm_ipc.h
-@@ -0,0 +1,465 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          fm_ipc.h
-+
-+ @Description   FM Inter-Partition prototypes, structures and definitions.
-+*//***************************************************************************/
-+#ifndef __FM_IPC_H
-+#define __FM_IPC_H
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_grp Frame Manager API
-+
-+ @Description   FM API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         FM_IPC_grp FM Inter-Partition messaging Unit
-+
-+ @Description   FM Inter-Partition messaging unit API definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(push,1)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+/**************************************************************************//**
-+ @Description   enum for defining MAC types
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   A structure of parameters for specifying a MAC.
-+*//***************************************************************************/
-+typedef _Packed struct
-+{
-+    uint8_t         id;
-+    uint32_t        enumType;
-+} _PackedType t_FmIpcMacParams;
-+
-+/**************************************************************************//**
-+ @Description   A structure of parameters for specifying a MAC.
-+*//***************************************************************************/
-+typedef _Packed struct
-+{
-+    t_FmIpcMacParams    macParams;
-+    uint16_t            maxFrameLength;
-+} _PackedType t_FmIpcMacMaxFrameParams;
-+
-+/**************************************************************************//**
-+ @Description   FM physical Address
-+*//***************************************************************************/
-+typedef _Packed struct t_FmIpcPhysAddr
-+{
-+    volatile uint8_t    high;
-+    volatile uint32_t   low;
-+} _PackedType t_FmIpcPhysAddr;
-+
-+
-+typedef _Packed struct t_FmIpcPortOutInitParams {
-+    uint8_t             numOfTasks;         /**< OUT */
-+    uint8_t             numOfExtraTasks;    /**< OUT */
-+    uint8_t             numOfOpenDmas;      /**< OUT */
-+    uint8_t             numOfExtraOpenDmas; /**< OUT */
-+    uint32_t            sizeOfFifo;         /**< OUT */
-+    uint32_t            extraSizeOfFifo;    /**< OUT */
-+    t_FmIpcPhysAddr     ipcPhysAddr;        /**< OUT */
-+} _PackedType t_FmIpcPortOutInitParams;
-+
-+/**************************************************************************//**
-+ @Description   Structure for IPC communication during FM_PORT_Init.
-+*//***************************************************************************/
-+typedef _Packed struct t_FmIpcPortInInitParams {
-+    uint8_t             hardwarePortId;     /**< IN. port Id */
-+    uint32_t            enumPortType;       /**< IN. Port type */
-+    uint8_t             boolIndependentMode;/**< IN. TRUE if FM Port operates in independent mode */
-+    uint16_t            liodnOffset;        /**< IN. Port's requested resource */
-+    uint8_t             numOfTasks;         /**< IN. Port's requested resource */
-+    uint8_t             numOfExtraTasks;    /**< IN. Port's requested resource */
-+    uint8_t             numOfOpenDmas;      /**< IN. Port's requested resource */
-+    uint8_t             numOfExtraOpenDmas; /**< IN. Port's requested resource */
-+    uint32_t            sizeOfFifo;         /**< IN. Port's requested resource */
-+    uint32_t            extraSizeOfFifo;    /**< IN. Port's requested resource */
-+    uint8_t             deqPipelineDepth;   /**< IN. Port's requested resource */
-+    uint16_t            maxFrameLength;     /**< IN. Port's max frame length. */
-+    uint16_t            liodnBase;          /**< IN. Irrelevant for P4080 rev 1.
-+                                                 LIODN base for this port, to be
-+                                                 used together with LIODN offset. */
-+} _PackedType t_FmIpcPortInInitParams;
-+
-+
-+/**************************************************************************//**
-+ @Description   Structure for IPC communication between port and FM
-+                regarding tasks and open DMA resources management.
-+*//***************************************************************************/
-+typedef _Packed struct t_FmIpcPortRsrcParams {
-+    uint8_t             hardwarePortId;     /**< IN. port Id */
-+    uint32_t            val;                /**< IN. Port's requested resource */
-+    uint32_t            extra;              /**< IN. Port's requested resource */
-+    uint8_t             boolInitialConfig;
-+} _PackedType t_FmIpcPortRsrcParams;
-+
-+
-+/**************************************************************************//**
-+ @Description   Structure for IPC communication between port and FM
-+                regarding tasks and open DMA resources management.
-+*//***************************************************************************/
-+typedef _Packed struct t_FmIpcPortFifoParams {
-+    t_FmIpcPortRsrcParams   rsrcParams;
-+    uint32_t                enumPortType;
-+    uint8_t                 boolIndependentMode;
-+    uint8_t                 deqPipelineDepth;
-+    uint8_t                 numOfPools;
-+    uint16_t                secondLargestBufSize;
-+    uint16_t                largestBufSize;
-+    uint8_t                 boolInitialConfig;
-+} _PackedType t_FmIpcPortFifoParams;
-+
-+/**************************************************************************//**
-+ @Description   Structure for port-FM communication during FM_PORT_Free.
-+*//***************************************************************************/
-+typedef _Packed struct t_FmIpcPortFreeParams {
-+    uint8_t             hardwarePortId;         /**< IN. port Id */
-+    uint32_t            enumPortType;           /**< IN. Port type */
-+    uint8_t             deqPipelineDepth;       /**< IN. Port's requested resource */
-+} _PackedType t_FmIpcPortFreeParams;
-+
-+/**************************************************************************//**
-+ @Description   Structure for defining DMA status
-+*//***************************************************************************/
-+typedef _Packed struct t_FmIpcDmaStatus {
-+    uint8_t    boolCmqNotEmpty;            /**< Command queue is not empty */
-+    uint8_t    boolBusError;               /**< Bus error occurred */
-+    uint8_t    boolReadBufEccError;        /**< Double ECC error on buffer Read */
-+    uint8_t    boolWriteBufEccSysError;    /**< Double ECC error on buffer write from system side */
-+    uint8_t    boolWriteBufEccFmError;     /**< Double ECC error on buffer write from FM side */
-+    uint8_t    boolSinglePortEccError;     /**< Single port ECC error from FM side */
-+} _PackedType t_FmIpcDmaStatus;
-+
-+typedef _Packed struct t_FmIpcRegisterIntr
-+{
-+    uint8_t         guestId;        /* IN */
-+    uint32_t        event;          /* IN */
-+} _PackedType t_FmIpcRegisterIntr;
-+
-+typedef _Packed struct t_FmIpcIsr
-+{
-+    uint8_t         boolErr;        /* IN */
-+    uint32_t        pendingReg;     /* IN */
-+} _PackedType t_FmIpcIsr;
-+
-+/**************************************************************************//**
-+ @Description   structure for returning FM parameters
-+*//***************************************************************************/
-+typedef _Packed struct t_FmIpcParams {
-+    uint16_t        fmClkFreq;              /**< OUT: FM Clock frequency */
-+    uint16_t        fmMacClkFreq;           /**< OUT: FM MAC clock frequence */
-+    uint8_t         majorRev;               /**< OUT: FM Major revision */
-+    uint8_t         minorRev;               /**< OUT: FM Minor revision */
-+} _PackedType t_FmIpcParams;
-+
-+
-+/**************************************************************************//**
-+ @Description   structure for returning Fman Ctrl Code revision information
-+*//***************************************************************************/
-+typedef _Packed struct t_FmIpcFmanCtrlCodeRevisionInfo {
-+    uint16_t        packageRev;             /**< OUT: Package revision */
-+    uint8_t         majorRev;               /**< OUT: Major revision */
-+    uint8_t         minorRev;               /**< OUT: Minor revision */
-+} _PackedType t_FmIpcFmanCtrlCodeRevisionInfo;
-+
-+/**************************************************************************//**
-+ @Description   Structure for defining Fm number of Fman controlers
-+*//***************************************************************************/
-+typedef _Packed struct t_FmIpcPortNumOfFmanCtrls {
-+    uint8_t             hardwarePortId;         /**< IN. port Id */
-+    uint8_t             numOfFmanCtrls;         /**< IN. Port type */
-+    t_FmFmanCtrl        orFmanCtrl;             /**< IN. fman controller for order restoration*/
-+} t_FmIpcPortNumOfFmanCtrls;
-+
-+/**************************************************************************//**
-+ @Description   structure for setting Fman contriller events
-+*//***************************************************************************/
-+typedef _Packed struct t_FmIpcFmanEvents {
-+    uint8_t     eventRegId;               /**< IN: Fman controller event register id */
-+    uint32_t    enableEvents;             /**< IN/OUT: required enabled events mask */
-+} _PackedType t_FmIpcFmanEvents;
-+
-+typedef _Packed struct t_FmIpcResourceAllocParams {
-+    uint8_t     guestId;
-+    uint16_t    base;
-+    uint16_t    num;
-+}_PackedType t_FmIpcResourceAllocParams;
-+
-+typedef _Packed struct t_FmIpcVspSetPortWindow {
-+    uint8_t     hardwarePortId;
-+    uint8_t     baseStorageProfile;
-+    uint8_t     log2NumOfProfiles;
-+}_PackedType t_FmIpcVspSetPortWindow;
-+
-+typedef _Packed struct t_FmIpcSetCongestionGroupPfcPriority {
-+    uint32_t     congestionGroupId;
-+    uint8_t      priorityBitMap;
-+}_PackedType t_FmIpcSetCongestionGroupPfcPriority;
-+
-+#define FM_IPC_MAX_REPLY_BODY_SIZE  20
-+#define FM_IPC_MAX_REPLY_SIZE       (FM_IPC_MAX_REPLY_BODY_SIZE + sizeof(uint32_t))
-+#define FM_IPC_MAX_MSG_SIZE         30
-+
-+typedef _Packed struct t_FmIpcMsg
-+{
-+    uint32_t    msgId;
-+    uint8_t     msgBody[FM_IPC_MAX_MSG_SIZE];
-+} _PackedType t_FmIpcMsg;
-+
-+typedef _Packed struct t_FmIpcReply
-+{
-+    uint32_t    error;
-+    uint8_t     replyBody[FM_IPC_MAX_REPLY_BODY_SIZE];
-+} _PackedType t_FmIpcReply;
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+
-+/***************************************************************************/
-+/************************ FRONT-END-TO-BACK-END*****************************/
-+/***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      FM_GET_TIMESTAMP_SCALE
-+
-+ @Description   Used by FM front-end.
-+
-+ @Param[out]    uint32_t Pointer
-+*//***************************************************************************/
-+#define FM_GET_TIMESTAMP_SCALE      1
-+
-+/**************************************************************************//**
-+ @Function      FM_GET_COUNTER
-+
-+ @Description   Used by FM front-end.
-+
-+ @Param[in/out] t_FmIpcGetCounter Pointer
-+*//***************************************************************************/
-+#define FM_GET_COUNTER              2
-+
-+/**************************************************************************//**
-+ @Function      FM_GET_SET_PORT_PARAMS
-+
-+ @Description   Used by FM front-end for the PORT module in order to set and get
-+                parameters in/from master FM module on FM PORT initialization time.
-+
-+ @Param[in/out] t_FmIcPortInitParams Pointer
-+*//***************************************************************************/
-+#define FM_GET_SET_PORT_PARAMS      4
-+
-+/**************************************************************************//**
-+ @Function      FM_FREE_PORT
-+
-+ @Description   Used by FM front-end for the PORT module when a port is freed
-+                to free all FM PORT resources.
-+
-+ @Param[in]     uint8_t Pointer
-+*//***************************************************************************/
-+#define FM_FREE_PORT                5
-+
-+/**************************************************************************//**
-+ @Function      FM_RESET_MAC
-+
-+ @Description   Used by front-end for the MAC module to reset the MAC registers
-+
-+ @Param[in]     t_FmIpcMacParams Pointer .
-+*//***************************************************************************/
-+#define FM_RESET_MAC                6
-+
-+/**************************************************************************//**
-+ @Function      FM_RESUME_STALLED_PORT
-+
-+ @Description   Used by FM front-end for the PORT module in order to
-+                release a stalled FM Port.
-+
-+ @Param[in]     uint8_t Pointer
-+*//***************************************************************************/
-+#define FM_RESUME_STALLED_PORT      7
-+
-+/**************************************************************************//**
-+ @Function      FM_IS_PORT_STALLED
-+
-+ @Description   Used by FM front-end for the PORT module in order to check whether
-+                an FM port is stalled.
-+
-+ @Param[in/out] t_FmIcPortIsStalled Pointer
-+*//***************************************************************************/
-+#define FM_IS_PORT_STALLED          8
-+
-+/**************************************************************************//**
-+ @Function      FM_GET_PARAMS
-+
-+ @Description   Used by FM front-end for the PORT module in order to dump
-+                return FM parameters.
-+
-+ @Param[in]     uint8_t Pointer
-+*//***************************************************************************/
-+#define FM_GET_PARAMS                  10
-+
-+/**************************************************************************//**
-+ @Function      FM_REGISTER_INTR
-+
-+ @Description   Used by FM front-end to register an interrupt handler to
-+                be called upon interrupt for guest.
-+
-+ @Param[out]    t_FmIpcRegisterIntr Pointer
-+*//***************************************************************************/
-+#define FM_REGISTER_INTR            11
-+
-+/**************************************************************************//**
-+ @Function      FM_DMA_STAT
-+
-+ @Description   Used by FM front-end to read the FM DMA status.
-+
-+ @Param[out]    t_FmIpcDmaStatus Pointer
-+*//***************************************************************************/
-+#define FM_DMA_STAT                 13
-+
-+/**************************************************************************//**
-+ @Function      FM_ALLOC_FMAN_CTRL_EVENT_REG
-+
-+ @Description   Used by FM front-end to allocate event register.
-+
-+ @Param[out]    Event register id Pointer
-+*//***************************************************************************/
-+#define FM_ALLOC_FMAN_CTRL_EVENT_REG 14
-+
-+/**************************************************************************//**
-+ @Function      FM_FREE_FMAN_CTRL_EVENT_REG
-+
-+ @Description   Used by FM front-end to free locate event register.
-+
-+ @Param[in]    uint8_t Pointer - Event register id
-+*//***************************************************************************/
-+#define FM_FREE_FMAN_CTRL_EVENT_REG 15
-+
-+/**************************************************************************//**
-+ @Function      FM_SET_FMAN_CTRL_EVENTS_ENABLE
-+
-+ @Description   Used by FM front-end to enable events in the FPM
-+                Fman controller event register.
-+
-+ @Param[in]    t_FmIpcFmanEvents Pointer
-+*//***************************************************************************/
-+#define FM_SET_FMAN_CTRL_EVENTS_ENABLE 16
-+
-+/**************************************************************************//**
-+ @Function      FM_SET_FMAN_CTRL_EVENTS_ENABLE
-+
-+ @Description   Used by FM front-end to enable events in the FPM
-+                Fman controller event register.
-+
-+ @Param[in/out] t_FmIpcFmanEvents Pointer
-+*//***************************************************************************/
-+#define FM_GET_FMAN_CTRL_EVENTS_ENABLE 17
-+
-+/**************************************************************************//**
-+ @Function      FM_SET_MAC_MAX_FRAME
-+
-+ @Description   Used by FM front-end to set MAC's MTU/RTU's in
-+                back-end.
-+
-+ @Param[in/out] t_FmIpcMacMaxFrameParams Pointer
-+*//***************************************************************************/
-+#define FM_SET_MAC_MAX_FRAME 18
-+
-+/**************************************************************************//**
-+ @Function      FM_GET_PHYS_MURAM_BASE
-+
-+ @Description   Used by FM front-end in order to get MURAM base address
-+
-+ @Param[in/out] t_FmIpcPhysAddr Pointer
-+*//***************************************************************************/
-+#define FM_GET_PHYS_MURAM_BASE  19
-+
-+/**************************************************************************//**
-+ @Function      FM_MASTER_IS_ALIVE
-+
-+ @Description   Used by FM front-end in order to verify Master is up
-+
-+ @Param[in/out] bool
-+*//***************************************************************************/
-+#define FM_MASTER_IS_ALIVE          20
-+
-+#define FM_ENABLE_RAM_ECC           21
-+#define FM_DISABLE_RAM_ECC          22
-+#define FM_SET_NUM_OF_FMAN_CTRL     23
-+#define FM_SET_SIZE_OF_FIFO         24
-+#define FM_SET_NUM_OF_TASKS         25
-+#define FM_SET_NUM_OF_OPEN_DMAS     26
-+#define FM_VSP_ALLOC                27
-+#define FM_VSP_FREE                 28
-+#define FM_VSP_SET_PORT_WINDOW      29
-+#define FM_GET_FMAN_CTRL_CODE_REV   30
-+#define FM_SET_CONG_GRP_PFC_PRIO    31
-+#ifdef FM_TX_ECC_FRMS_ERRATA_10GMAC_A004
-+#define FM_10G_TX_ECC_WA            100
-+#endif /* FM_TX_ECC_FRMS_ERRATA_10GMAC_A004 */
-+
-+/***************************************************************************/
-+/************************ BACK-END-TO-FRONT-END*****************************/
-+/***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      FM_GUEST_ISR
-+
-+ @Description   Used by FM back-end to report an interrupt to the front-end.
-+
-+ @Param[out]    t_FmIpcIsr Pointer
-+*//***************************************************************************/
-+#define FM_GUEST_ISR                1
-+
-+
-+
-+/** @} */ /* end of FM_IPC_grp group */
-+/** @} */ /* end of FM_grp group */
-+
-+
-+#endif /* __FM_IPC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm_muram.c
-@@ -0,0 +1,174 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          FM_muram.c
-+
-+ @Description   FM MURAM ...
-+*//***************************************************************************/
-+#include "error_ext.h"
-+#include "std_ext.h"
-+#include "mm_ext.h"
-+#include "string_ext.h"
-+#include "sprint_ext.h"
-+#include "fm_muram_ext.h"
-+#include "fm_common.h"
-+
-+#define __ERR_MODULE__  MODULE_FM_MURAM
-+
-+
-+typedef struct
-+{
-+    t_Handle    h_Mem;
-+    uintptr_t   baseAddr;
-+    uint32_t    size;
-+} t_FmMuram;
-+
-+
-+void FmMuramClear(t_Handle h_FmMuram)
-+{
-+    t_FmMuram   *p_FmMuram = ( t_FmMuram *)h_FmMuram;
-+
-+    SANITY_CHECK_RETURN(h_FmMuram, E_INVALID_HANDLE);
-+    IOMemSet32(UINT_TO_PTR(p_FmMuram->baseAddr), 0, p_FmMuram->size);
-+}
-+
-+
-+t_Handle FM_MURAM_ConfigAndInit(uintptr_t baseAddress, uint32_t size)
-+{
-+    t_Handle    h_Mem;
-+    t_FmMuram   *p_FmMuram;
-+
-+    if (!baseAddress)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("baseAddress 0 is not supported"));
-+        return NULL;
-+    }
-+
-+    if (baseAddress%4)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("baseAddress not 4 bytes aligned!"));
-+        return NULL;
-+    }
-+
-+    /* Allocate FM MURAM structure */
-+    p_FmMuram = (t_FmMuram *) XX_Malloc(sizeof(t_FmMuram));
-+    if (!p_FmMuram)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FM MURAM driver structure"));
-+        return NULL;
-+    }
-+    memset(p_FmMuram, 0, sizeof(t_FmMuram));
-+
-+
-+    if ((MM_Init(&h_Mem, baseAddress, size) != E_OK) || (!h_Mem))
-+    {
-+        XX_Free(p_FmMuram);
-+        REPORT_ERROR(MAJOR, E_INVALID_HANDLE, ("FM-MURAM partition!!!"));
-+        return NULL;
-+    }
-+
-+    /* Initialize FM MURAM parameters which will be kept by the driver */
-+    p_FmMuram->baseAddr = baseAddress;
-+    p_FmMuram->size = size;
-+    p_FmMuram->h_Mem = h_Mem;
-+
-+    return p_FmMuram;
-+}
-+
-+t_Error FM_MURAM_Free(t_Handle h_FmMuram)
-+{
-+    t_FmMuram   *p_FmMuram = ( t_FmMuram *)h_FmMuram;
-+
-+    if (p_FmMuram->h_Mem)
-+        MM_Free(p_FmMuram->h_Mem);
-+
-+    XX_Free(h_FmMuram);
-+
-+    return E_OK;
-+}
-+
-+void  * FM_MURAM_AllocMem(t_Handle h_FmMuram, uint32_t size, uint32_t align)
-+{
-+    t_FmMuram   *p_FmMuram = ( t_FmMuram *)h_FmMuram;
-+    uintptr_t   addr;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmMuram, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(p_FmMuram->h_Mem, E_INVALID_HANDLE, NULL);
-+
-+    addr = (uintptr_t)MM_Get(p_FmMuram->h_Mem, size, align ,"FM MURAM");
-+
-+    if (addr == ILLEGAL_BASE)
-+        return NULL;
-+
-+    return UINT_TO_PTR(addr);
-+}
-+
-+void  * FM_MURAM_AllocMemForce(t_Handle h_FmMuram, uint64_t base, uint32_t size)
-+{
-+    t_FmMuram   *p_FmMuram = ( t_FmMuram *)h_FmMuram;
-+    uintptr_t   addr;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmMuram, E_INVALID_HANDLE, NULL);
-+    SANITY_CHECK_RETURN_VALUE(p_FmMuram->h_Mem, E_INVALID_HANDLE, NULL);
-+
-+    addr = (uintptr_t)MM_GetForce(p_FmMuram->h_Mem, base, size, "FM MURAM");
-+
-+    if (addr == ILLEGAL_BASE)
-+        return NULL;
-+
-+    return UINT_TO_PTR(addr);
-+}
-+
-+t_Error FM_MURAM_FreeMem(t_Handle h_FmMuram, void *ptr)
-+{
-+    t_FmMuram   *p_FmMuram = ( t_FmMuram *)h_FmMuram;
-+
-+    SANITY_CHECK_RETURN_ERROR(h_FmMuram, E_INVALID_HANDLE);
-+    SANITY_CHECK_RETURN_ERROR(p_FmMuram->h_Mem, E_INVALID_HANDLE);
-+
-+    if (MM_Put(p_FmMuram->h_Mem, PTR_TO_UINT(ptr)) == 0)
-+        RETURN_ERROR(MINOR, E_INVALID_ADDRESS, ("memory pointer!!!"));
-+
-+    return E_OK;
-+}
-+
-+uint64_t FM_MURAM_GetFreeMemSize(t_Handle h_FmMuram)
-+{
-+    t_FmMuram   *p_FmMuram = ( t_FmMuram *)h_FmMuram;
-+
-+    SANITY_CHECK_RETURN_VALUE(h_FmMuram, E_INVALID_HANDLE, 0);
-+    SANITY_CHECK_RETURN_VALUE(p_FmMuram->h_Mem, E_INVALID_HANDLE, 0);
-+
-+    return MM_GetFreeMemSize(p_FmMuram->h_Mem);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fman.c
-@@ -0,0 +1,1398 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#include <linux/math64.h>
-+#include "fsl_fman.h"
-+#include "dpaa_integration_ext.h"
-+
-+uint32_t fman_get_bmi_err_event(struct fman_bmi_regs *bmi_rg)
-+{
-+	uint32_t	event, mask, force;
-+
-+	event = ioread32be(&bmi_rg->fmbm_ievr);
-+	mask = ioread32be(&bmi_rg->fmbm_ier);
-+	event &= mask;
-+	/* clear the forced events */
-+	force = ioread32be(&bmi_rg->fmbm_ifr);
-+	if (force & event)
-+		iowrite32be(force & ~event, &bmi_rg->fmbm_ifr);
-+	/* clear the acknowledged events */
-+	iowrite32be(event, &bmi_rg->fmbm_ievr);
-+	return event;
-+}
-+
-+uint32_t fman_get_qmi_err_event(struct fman_qmi_regs *qmi_rg)
-+{
-+	uint32_t	event, mask, force;
-+
-+	event = ioread32be(&qmi_rg->fmqm_eie);
-+	mask = ioread32be(&qmi_rg->fmqm_eien);
-+	event &= mask;
-+
-+	/* clear the forced events */
-+	force = ioread32be(&qmi_rg->fmqm_eif);
-+	if (force & event)
-+		iowrite32be(force & ~event, &qmi_rg->fmqm_eif);
-+	/* clear the acknowledged events */
-+	iowrite32be(event, &qmi_rg->fmqm_eie);
-+	return event;
-+}
-+
-+uint32_t fman_get_dma_com_id(struct fman_dma_regs *dma_rg)
-+{
-+	return ioread32be(&dma_rg->fmdmtcid);
-+}
-+
-+uint64_t fman_get_dma_addr(struct fman_dma_regs *dma_rg)
-+{
-+	uint64_t addr;
-+
-+	addr = (uint64_t)ioread32be(&dma_rg->fmdmtal);
-+	addr |= ((uint64_t)(ioread32be(&dma_rg->fmdmtah)) << 32);
-+
-+	return addr;
-+}
-+
-+uint32_t fman_get_dma_err_event(struct fman_dma_regs *dma_rg)
-+{
-+	uint32_t status, mask;
-+
-+	status = ioread32be(&dma_rg->fmdmsr);
-+	mask = ioread32be(&dma_rg->fmdmmr);
-+
-+	/* clear DMA_STATUS_BUS_ERR if mask has no DMA_MODE_BER */
-+	if ((mask & DMA_MODE_BER) != DMA_MODE_BER)
-+		status &= ~DMA_STATUS_BUS_ERR;
-+
-+	/* clear relevant bits if mask has no DMA_MODE_ECC */
-+	if ((mask & DMA_MODE_ECC) != DMA_MODE_ECC)
-+		status &= ~(DMA_STATUS_FM_SPDAT_ECC |
-+		        DMA_STATUS_READ_ECC |
-+				DMA_STATUS_SYSTEM_WRITE_ECC |
-+				DMA_STATUS_FM_WRITE_ECC);
-+
-+	/* clear set events */
-+	iowrite32be(status, &dma_rg->fmdmsr);
-+
-+	return status;
-+}
-+
-+uint32_t fman_get_fpm_err_event(struct fman_fpm_regs *fpm_rg)
-+{
-+	uint32_t	event;
-+
-+	event = ioread32be(&fpm_rg->fmfp_ee);
-+	/* clear the all occurred events */
-+	iowrite32be(event, &fpm_rg->fmfp_ee);
-+	return event;
-+}
-+
-+uint32_t fman_get_muram_err_event(struct fman_fpm_regs *fpm_rg)
-+{
-+	uint32_t	event, mask;
-+
-+	event = ioread32be(&fpm_rg->fm_rcr);
-+	mask = ioread32be(&fpm_rg->fm_rie);
-+
-+	/* clear MURAM event bit (do not clear IRAM event) */
-+	iowrite32be(event & ~FPM_RAM_IRAM_ECC, &fpm_rg->fm_rcr);
-+
-+	if ((mask & FPM_MURAM_ECC_ERR_EX_EN))
-+		return event;
-+	else
-+		return 0;
-+}
-+
-+uint32_t fman_get_iram_err_event(struct fman_fpm_regs *fpm_rg)
-+{
-+	uint32_t    event, mask;
-+
-+	event = ioread32be(&fpm_rg->fm_rcr) ;
-+	mask = ioread32be(&fpm_rg->fm_rie);
-+	/* clear IRAM event bit (do not clear MURAM event) */
-+	iowrite32be(event & ~FPM_RAM_MURAM_ECC,
-+			&fpm_rg->fm_rcr);
-+
-+	if ((mask & FPM_IRAM_ECC_ERR_EX_EN))
-+		return event;
-+	else
-+		return 0;
-+}
-+
-+uint32_t fman_get_qmi_event(struct fman_qmi_regs *qmi_rg)
-+{
-+	uint32_t	event, mask, force;
-+
-+	event = ioread32be(&qmi_rg->fmqm_ie);
-+	mask = ioread32be(&qmi_rg->fmqm_ien);
-+	event &= mask;
-+	/* clear the forced events */
-+	force = ioread32be(&qmi_rg->fmqm_if);
-+	if (force & event)
-+		iowrite32be(force & ~event, &qmi_rg->fmqm_if);
-+	/* clear the acknowledged events */
-+	iowrite32be(event, &qmi_rg->fmqm_ie);
-+	return event;
-+}
-+
-+void fman_enable_time_stamp(struct fman_fpm_regs *fpm_rg,
-+				uint8_t count1ubit,
-+				uint16_t fm_clk_freq)
-+{
-+	uint32_t tmp;
-+	uint64_t frac;
-+	uint32_t intgr;
-+	uint32_t ts_freq = (uint32_t)(1 << count1ubit); /* in Mhz */
-+
-+	/* configure timestamp so that bit 8 will count 1 microsecond
-+	 * Find effective count rate at TIMESTAMP least significant bits:
-+	 * Effective_Count_Rate = 1MHz x 2^8 = 256MHz
-+	 * Find frequency ratio between effective count rate and the clock:
-+	 * Effective_Count_Rate / CLK e.g. for 600 MHz clock:
-+	 * 256/600 = 0.4266666... */
-+
-+	intgr = ts_freq / fm_clk_freq;
-+	/* we multiply by 2^16 to keep the fraction of the division
-+	 * we do not div back, since we write this value as a fraction
-+	 * see spec */
-+
-+	frac = ((uint64_t)ts_freq << 16) - ((uint64_t)intgr << 16) * fm_clk_freq;
-+	/* we check remainder of the division in order to round up if not int */
-+	if (do_div(frac, fm_clk_freq))
-+		frac++;
-+
-+	tmp = (intgr << FPM_TS_INT_SHIFT) | (uint16_t)frac;
-+	iowrite32be(tmp, &fpm_rg->fmfp_tsc2);
-+
-+	/* enable timestamp with original clock */
-+	iowrite32be(FPM_TS_CTL_EN, &fpm_rg->fmfp_tsc1);
-+}
-+
-+uint32_t fman_get_fpm_error_interrupts(struct fman_fpm_regs *fpm_rg)
-+{
-+	return ioread32be(&fpm_rg->fm_epi);
-+}
-+
-+
-+int fman_set_erratum_10gmac_a004_wa(struct fman_fpm_regs *fpm_rg)
-+{
-+	int timeout = 100;
-+
-+	iowrite32be(0x40000000, &fpm_rg->fmfp_extc);
-+
-+	while ((ioread32be(&fpm_rg->fmfp_extc) & 0x40000000) && --timeout)
-+		udelay(10);
-+
-+	if (!timeout)
-+		return -EBUSY;
-+	return 0;
-+}
-+
-+void fman_set_ctrl_intr(struct fman_fpm_regs *fpm_rg,
-+			uint8_t event_reg_id,
-+			uint32_t enable_events)
-+{
-+	iowrite32be(enable_events, &fpm_rg->fmfp_cee[event_reg_id]);
-+}
-+
-+uint32_t fman_get_ctrl_intr(struct fman_fpm_regs *fpm_rg, uint8_t event_reg_id)
-+{
-+	return ioread32be(&fpm_rg->fmfp_cee[event_reg_id]);
-+}
-+
-+void fman_set_num_of_riscs_per_port(struct fman_fpm_regs *fpm_rg,
-+					uint8_t port_id,
-+					uint8_t num_fman_ctrls,
-+					uint32_t or_fman_ctrl)
-+{
-+	uint32_t tmp = 0;
-+
-+	tmp = (uint32_t)(port_id << FPM_PORT_FM_CTL_PORTID_SHIFT);
-+	/*TODO - maybe to put CTL# according to another criteria*/
-+	if (num_fman_ctrls == 2)
-+		tmp = FPM_PRT_FM_CTL2 | FPM_PRT_FM_CTL1;
-+	/* order restoration */
-+	tmp |= (or_fman_ctrl << FPM_PRC_ORA_FM_CTL_SEL_SHIFT) | or_fman_ctrl;
-+
-+	iowrite32be(tmp, &fpm_rg->fmfp_prc);
-+}
-+
-+void fman_set_order_restoration_per_port(struct fman_fpm_regs *fpm_rg,
-+					uint8_t port_id,
-+					bool independent_mode,
-+					bool is_rx_port)
-+{
-+	uint32_t tmp = 0;
-+
-+	tmp = (uint32_t)(port_id << FPM_PORT_FM_CTL_PORTID_SHIFT);
-+	if (independent_mode) {
-+		if (is_rx_port)
-+			tmp |= (FPM_PRT_FM_CTL1 <<
-+				FPM_PRC_ORA_FM_CTL_SEL_SHIFT) | FPM_PRT_FM_CTL1;
-+		else
-+			tmp |= (FPM_PRT_FM_CTL2 <<
-+				FPM_PRC_ORA_FM_CTL_SEL_SHIFT) | FPM_PRT_FM_CTL2;
-+	} else {
-+		tmp |= (FPM_PRT_FM_CTL2|FPM_PRT_FM_CTL1);
-+
-+		/* order restoration */
-+		if (port_id % 2)
-+			tmp |= (FPM_PRT_FM_CTL1 <<
-+					FPM_PRC_ORA_FM_CTL_SEL_SHIFT);
-+		else
-+			tmp |= (FPM_PRT_FM_CTL2 <<
-+					FPM_PRC_ORA_FM_CTL_SEL_SHIFT);
-+	}
-+	iowrite32be(tmp, &fpm_rg->fmfp_prc);
-+}
-+
-+uint8_t fman_get_qmi_deq_th(struct fman_qmi_regs *qmi_rg)
-+{
-+	return (uint8_t)ioread32be(&qmi_rg->fmqm_gc);
-+}
-+
-+uint8_t fman_get_qmi_enq_th(struct fman_qmi_regs *qmi_rg)
-+{
-+	return (uint8_t)(ioread32be(&qmi_rg->fmqm_gc) >> 8);
-+}
-+
-+void fman_set_qmi_enq_th(struct fman_qmi_regs *qmi_rg, uint8_t val)
-+{
-+	uint32_t tmp_reg;
-+
-+	tmp_reg = ioread32be(&qmi_rg->fmqm_gc);
-+	tmp_reg &= ~QMI_CFG_ENQ_MASK;
-+	tmp_reg |= ((uint32_t)val << 8);
-+	iowrite32be(tmp_reg, &qmi_rg->fmqm_gc);
-+}
-+
-+void fman_set_qmi_deq_th(struct fman_qmi_regs *qmi_rg, uint8_t val)
-+{
-+	uint32_t tmp_reg;
-+
-+	tmp_reg = ioread32be(&qmi_rg->fmqm_gc);
-+	tmp_reg &= ~QMI_CFG_DEQ_MASK;
-+	tmp_reg |= (uint32_t)val;
-+	iowrite32be(tmp_reg, &qmi_rg->fmqm_gc);
-+}
-+
-+void fman_qmi_disable_dispatch_limit(struct fman_fpm_regs *fpm_rg)
-+{
-+	iowrite32be(0, &fpm_rg->fmfp_mxd);
-+}
-+
-+void fman_set_liodn_per_port(struct fman_rg *fman_rg, uint8_t port_id,
-+				uint16_t liodn_base,
-+				uint16_t liodn_ofst)
-+{
-+	uint32_t tmp;
-+
-+	if ((port_id > 63) || (port_id < 1))
-+	        return;
-+
-+	/* set LIODN base for this port */
-+	tmp = ioread32be(&fman_rg->dma_rg->fmdmplr[port_id / 2]);
-+	if (port_id % 2) {
-+		tmp &= ~FM_LIODN_BASE_MASK;
-+		tmp |= (uint32_t)liodn_base;
-+	} else {
-+		tmp &= ~(FM_LIODN_BASE_MASK << DMA_LIODN_SHIFT);
-+		tmp |= (uint32_t)liodn_base << DMA_LIODN_SHIFT;
-+	}
-+	iowrite32be(tmp, &fman_rg->dma_rg->fmdmplr[port_id / 2]);
-+	iowrite32be((uint32_t)liodn_ofst,
-+			&fman_rg->bmi_rg->fmbm_spliodn[port_id - 1]);
-+}
-+
-+bool fman_is_port_stalled(struct fman_fpm_regs *fpm_rg, uint8_t port_id)
-+{
-+	return (bool)!!(ioread32be(&fpm_rg->fmfp_ps[port_id]) & FPM_PS_STALLED);
-+}
-+
-+void fman_resume_stalled_port(struct fman_fpm_regs *fpm_rg, uint8_t port_id)
-+{
-+	uint32_t	tmp;
-+
-+	tmp = (uint32_t)((port_id << FPM_PORT_FM_CTL_PORTID_SHIFT) |
-+				FPM_PRC_REALSE_STALLED);
-+	iowrite32be(tmp, &fpm_rg->fmfp_prc);
-+}
-+
-+int fman_reset_mac(struct fman_fpm_regs *fpm_rg, uint8_t mac_id, bool is_10g)
-+{
-+	uint32_t msk, timeout = 100;
-+
-+	/* Get the relevant bit mask */
-+	if (is_10g) {
-+		switch (mac_id) {
-+		case(0):
-+			msk = FPM_RSTC_10G0_RESET;
-+			break;
-+        case(1):
-+            msk = FPM_RSTC_10G1_RESET;
-+            break;
-+		default:
-+			return -EINVAL;
-+		}
-+	} else {
-+		switch (mac_id) {
-+		case(0):
-+			msk = FPM_RSTC_1G0_RESET;
-+			break;
-+		case(1):
-+			msk = FPM_RSTC_1G1_RESET;
-+			break;
-+		case(2):
-+			msk = FPM_RSTC_1G2_RESET;
-+			break;
-+		case(3):
-+			msk = FPM_RSTC_1G3_RESET;
-+			break;
-+		case(4):
-+			msk = FPM_RSTC_1G4_RESET;
-+			break;
-+        case (5):
-+            msk = FPM_RSTC_1G5_RESET;
-+            break;
-+        case (6):
-+            msk = FPM_RSTC_1G6_RESET;
-+            break;
-+        case (7):
-+            msk = FPM_RSTC_1G7_RESET;
-+            break;
-+		default:
-+			return -EINVAL;
-+		}
-+	}
-+	/* reset */
-+	iowrite32be(msk, &fpm_rg->fm_rstc);
-+	while ((ioread32be(&fpm_rg->fm_rstc) & msk) && --timeout)
-+		udelay(10);
-+
-+	if (!timeout)
-+		return -EBUSY;
-+	return 0;
-+}
-+
-+uint16_t fman_get_size_of_fifo(struct fman_bmi_regs *bmi_rg, uint8_t port_id)
-+{
-+	uint32_t tmp_reg;
-+
-+    if ((port_id > 63) || (port_id < 1))
-+            return 0;
-+
-+	tmp_reg = ioread32be(&bmi_rg->fmbm_pfs[port_id - 1]);
-+	return (uint16_t)((tmp_reg & BMI_FIFO_SIZE_MASK) + 1);
-+}
-+
-+uint32_t fman_get_total_fifo_size(struct fman_bmi_regs *bmi_rg)
-+{
-+	uint32_t reg, res;
-+
-+	reg = ioread32be(&bmi_rg->fmbm_cfg1);
-+	res = (reg >> BMI_CFG1_FIFO_SIZE_SHIFT) & 0x3ff;
-+	return res * FMAN_BMI_FIFO_UNITS;
-+}
-+
-+uint16_t fman_get_size_of_extra_fifo(struct fman_bmi_regs *bmi_rg,
-+					uint8_t port_id)
-+{
-+	uint32_t tmp_reg;
-+
-+    if ((port_id > 63) || (port_id < 1))
-+            return 0;
-+
-+	tmp_reg = ioread32be(&bmi_rg->fmbm_pfs[port_id-1]);
-+	return (uint16_t)((tmp_reg & BMI_EXTRA_FIFO_SIZE_MASK) >>
-+				BMI_EXTRA_FIFO_SIZE_SHIFT);
-+}
-+
-+void fman_set_size_of_fifo(struct fman_bmi_regs *bmi_rg,
-+				uint8_t port_id,
-+				uint32_t sz_fifo,
-+				uint32_t extra_sz_fifo)
-+{
-+	uint32_t tmp;
-+
-+	if ((port_id > 63) || (port_id < 1))
-+	        return;
-+
-+	/* calculate reg */
-+	tmp = (uint32_t)((sz_fifo / FMAN_BMI_FIFO_UNITS - 1) |
-+		((extra_sz_fifo / FMAN_BMI_FIFO_UNITS) <<
-+				BMI_EXTRA_FIFO_SIZE_SHIFT));
-+	iowrite32be(tmp, &bmi_rg->fmbm_pfs[port_id - 1]);
-+}
-+
-+uint8_t fman_get_num_of_tasks(struct fman_bmi_regs *bmi_rg, uint8_t port_id)
-+{
-+	uint32_t tmp;
-+
-+    if ((port_id > 63) || (port_id < 1))
-+        return 0;
-+
-+	tmp = ioread32be(&bmi_rg->fmbm_pp[port_id - 1]);
-+	return (uint8_t)(((tmp & BMI_NUM_OF_TASKS_MASK) >>
-+				BMI_NUM_OF_TASKS_SHIFT) + 1);
-+}
-+
-+uint8_t fman_get_num_extra_tasks(struct fman_bmi_regs *bmi_rg, uint8_t port_id)
-+{
-+	uint32_t tmp;
-+
-+    if ((port_id > 63) || (port_id < 1))
-+        return 0;
-+
-+	tmp = ioread32be(&bmi_rg->fmbm_pp[port_id - 1]);
-+	return (uint8_t)((tmp & BMI_NUM_OF_EXTRA_TASKS_MASK) >>
-+				BMI_EXTRA_NUM_OF_TASKS_SHIFT);
-+}
-+
-+void fman_set_num_of_tasks(struct fman_bmi_regs *bmi_rg,
-+				uint8_t port_id,
-+				uint8_t num_tasks,
-+				uint8_t num_extra_tasks)
-+{
-+	uint32_t tmp;
-+
-+	if ((port_id > 63) || (port_id < 1))
-+	    return;
-+
-+	/* calculate reg */
-+	tmp = ioread32be(&bmi_rg->fmbm_pp[port_id - 1]) &
-+			~(BMI_NUM_OF_TASKS_MASK | BMI_NUM_OF_EXTRA_TASKS_MASK);
-+	tmp |= (uint32_t)(((num_tasks - 1) << BMI_NUM_OF_TASKS_SHIFT) |
-+			(num_extra_tasks << BMI_EXTRA_NUM_OF_TASKS_SHIFT));
-+	iowrite32be(tmp, &bmi_rg->fmbm_pp[port_id - 1]);
-+}
-+
-+uint8_t fman_get_num_of_dmas(struct fman_bmi_regs *bmi_rg, uint8_t port_id)
-+{
-+	uint32_t tmp;
-+
-+    if ((port_id > 63) || (port_id < 1))
-+            return 0;
-+
-+	tmp = ioread32be(&bmi_rg->fmbm_pp[port_id - 1]);
-+	return (uint8_t)(((tmp & BMI_NUM_OF_DMAS_MASK) >>
-+			BMI_NUM_OF_DMAS_SHIFT) + 1);
-+}
-+
-+uint8_t fman_get_num_extra_dmas(struct fman_bmi_regs *bmi_rg, uint8_t port_id)
-+{
-+	uint32_t tmp;
-+
-+	if ((port_id > 63) || (port_id < 1))
-+	        return 0;
-+
-+	tmp = ioread32be(&bmi_rg->fmbm_pp[port_id - 1]);
-+	return (uint8_t)((tmp & BMI_NUM_OF_EXTRA_DMAS_MASK) >>
-+			BMI_EXTRA_NUM_OF_DMAS_SHIFT);
-+}
-+
-+void fman_set_num_of_open_dmas(struct fman_bmi_regs *bmi_rg,
-+				uint8_t port_id,
-+				uint8_t num_open_dmas,
-+				uint8_t num_extra_open_dmas,
-+				uint8_t total_num_dmas)
-+{
-+	uint32_t tmp = 0;
-+
-+	if ((port_id > 63) || (port_id < 1))
-+	    return;
-+
-+	/* calculate reg */
-+	tmp = ioread32be(&bmi_rg->fmbm_pp[port_id - 1]) &
-+			~(BMI_NUM_OF_DMAS_MASK | BMI_NUM_OF_EXTRA_DMAS_MASK);
-+	tmp |= (uint32_t)(((num_open_dmas-1) << BMI_NUM_OF_DMAS_SHIFT) |
-+			(num_extra_open_dmas << BMI_EXTRA_NUM_OF_DMAS_SHIFT));
-+	iowrite32be(tmp, &bmi_rg->fmbm_pp[port_id - 1]);
-+
-+	/* update total num of DMA's with committed number of open DMAS,
-+	 * and max uncommitted pool. */
-+    if (total_num_dmas)
-+    {
-+        tmp = ioread32be(&bmi_rg->fmbm_cfg2) & ~BMI_CFG2_DMAS_MASK;
-+        tmp |= (uint32_t)(total_num_dmas - 1) << BMI_CFG2_DMAS_SHIFT;
-+        iowrite32be(tmp, &bmi_rg->fmbm_cfg2);
-+    }
-+}
-+
-+void fman_set_vsp_window(struct fman_bmi_regs *bmi_rg,
-+			    	     uint8_t port_id,
-+				         uint8_t base_storage_profile,
-+				         uint8_t log2_num_of_profiles)
-+{
-+	uint32_t tmp = 0;
-+	if ((port_id > 63) || (port_id < 1))
-+	    return;
-+
-+    tmp = ioread32be(&bmi_rg->fmbm_spliodn[port_id-1]);
-+    tmp |= (uint32_t)((uint32_t)base_storage_profile & 0x3f) << 16;
-+    tmp |= (uint32_t)log2_num_of_profiles << 28;
-+    iowrite32be(tmp, &bmi_rg->fmbm_spliodn[port_id-1]);
-+}
-+
-+void fman_set_congestion_group_pfc_priority(uint32_t *cpg_rg,
-+                                            uint32_t congestion_group_id,
-+                                            uint8_t priority_bit_map,
-+                                            uint32_t reg_num)
-+{
-+	uint32_t offset, tmp = 0;
-+
-+    offset  = (congestion_group_id%4)*8;
-+
-+    tmp = ioread32be(&cpg_rg[reg_num]);
-+    tmp &= ~(0xFF<<offset);
-+    tmp |= (uint32_t)priority_bit_map << offset;
-+
-+    iowrite32be(tmp,&cpg_rg[reg_num]);
-+}
-+
-+/*****************************************************************************/
-+/*                      API Init unit functions                              */
-+/*****************************************************************************/
-+void fman_defconfig(struct fman_cfg *cfg, bool is_master)
-+{
-+    memset(cfg, 0, sizeof(struct fman_cfg));
-+
-+    cfg->catastrophic_err               = DEFAULT_CATASTROPHIC_ERR;
-+    cfg->dma_err                        = DEFAULT_DMA_ERR;
-+    cfg->halt_on_external_activ         = DEFAULT_HALT_ON_EXTERNAL_ACTIVATION;
-+    cfg->halt_on_unrecov_ecc_err        = DEFAULT_HALT_ON_UNRECOVERABLE_ECC_ERROR;
-+    cfg->en_iram_test_mode              = FALSE;
-+    cfg->en_muram_test_mode             = FALSE;
-+    cfg->external_ecc_rams_enable       = DEFAULT_EXTERNAL_ECC_RAMS_ENABLE;
-+
-+	if (!is_master)
-+	    return;
-+
-+    cfg->dma_aid_override               = DEFAULT_AID_OVERRIDE;
-+    cfg->dma_aid_mode                   = DEFAULT_AID_MODE;
-+    cfg->dma_comm_qtsh_clr_emer         = DEFAULT_DMA_COMM_Q_LOW;
-+    cfg->dma_comm_qtsh_asrt_emer        = DEFAULT_DMA_COMM_Q_HIGH;
-+    cfg->dma_cache_override             = DEFAULT_CACHE_OVERRIDE;
-+    cfg->dma_cam_num_of_entries         = DEFAULT_DMA_CAM_NUM_OF_ENTRIES;
-+    cfg->dma_dbg_cnt_mode               = DEFAULT_DMA_DBG_CNT_MODE;
-+    cfg->dma_en_emergency               = DEFAULT_DMA_EN_EMERGENCY;
-+    cfg->dma_sos_emergency              = DEFAULT_DMA_SOS_EMERGENCY;
-+    cfg->dma_watchdog                   = DEFAULT_DMA_WATCHDOG;
-+    cfg->dma_en_emergency_smoother      = DEFAULT_DMA_EN_EMERGENCY_SMOOTHER;
-+    cfg->dma_emergency_switch_counter   = DEFAULT_DMA_EMERGENCY_SWITCH_COUNTER;
-+    cfg->disp_limit_tsh                 = DEFAULT_DISP_LIMIT;
-+    cfg->prs_disp_tsh                   = DEFAULT_PRS_DISP_TH;
-+    cfg->plcr_disp_tsh                  = DEFAULT_PLCR_DISP_TH;
-+    cfg->kg_disp_tsh                    = DEFAULT_KG_DISP_TH;
-+    cfg->bmi_disp_tsh                   = DEFAULT_BMI_DISP_TH;
-+    cfg->qmi_enq_disp_tsh               = DEFAULT_QMI_ENQ_DISP_TH;
-+    cfg->qmi_deq_disp_tsh               = DEFAULT_QMI_DEQ_DISP_TH;
-+    cfg->fm_ctl1_disp_tsh               = DEFAULT_FM_CTL1_DISP_TH;
-+    cfg->fm_ctl2_disp_tsh               = DEFAULT_FM_CTL2_DISP_TH;
-+ 
-+	cfg->pedantic_dma                   = FALSE;
-+	cfg->tnum_aging_period              = DEFAULT_TNUM_AGING_PERIOD;
-+	cfg->dma_stop_on_bus_error          = FALSE;
-+	cfg->qmi_deq_option_support         = FALSE;
-+}
-+
-+void fman_regconfig(struct fman_rg *fman_rg, struct fman_cfg *cfg)
-+{
-+	uint32_t tmp_reg;
-+
-+    /* read the values from the registers as they are initialized by the HW with
-+     * the required values.
-+     */
-+    tmp_reg = ioread32be(&fman_rg->bmi_rg->fmbm_cfg1);
-+    cfg->total_fifo_size =
-+        (((tmp_reg & BMI_TOTAL_FIFO_SIZE_MASK) >> BMI_CFG1_FIFO_SIZE_SHIFT) + 1) * FMAN_BMI_FIFO_UNITS;
-+
-+    tmp_reg = ioread32be(&fman_rg->bmi_rg->fmbm_cfg2);
-+    cfg->total_num_of_tasks =
-+        (uint8_t)(((tmp_reg & BMI_TOTAL_NUM_OF_TASKS_MASK) >> BMI_CFG2_TASKS_SHIFT) + 1);
-+
-+    tmp_reg = ioread32be(&fman_rg->dma_rg->fmdmtr);
-+    cfg->dma_comm_qtsh_asrt_emer = (uint8_t)(tmp_reg >> DMA_THRESH_COMMQ_SHIFT);
-+
-+    tmp_reg = ioread32be(&fman_rg->dma_rg->fmdmhy);
-+    cfg->dma_comm_qtsh_clr_emer  = (uint8_t)(tmp_reg >> DMA_THRESH_COMMQ_SHIFT);
-+
-+    tmp_reg = ioread32be(&fman_rg->dma_rg->fmdmmr);
-+    cfg->dma_cache_override      = (enum fman_dma_cache_override)((tmp_reg & DMA_MODE_CACHE_OR_MASK) >> DMA_MODE_CACHE_OR_SHIFT);
-+    cfg->dma_cam_num_of_entries  = (uint8_t)((((tmp_reg & DMA_MODE_CEN_MASK) >> DMA_MODE_CEN_SHIFT) +1)*DMA_CAM_UNITS);
-+    cfg->dma_aid_override        = (bool)((tmp_reg & DMA_MODE_AID_OR)? TRUE:FALSE);
-+    cfg->dma_dbg_cnt_mode        = (enum fman_dma_dbg_cnt_mode)((tmp_reg & DMA_MODE_DBG_MASK) >> DMA_MODE_DBG_SHIFT);
-+    cfg->dma_en_emergency        = (bool)((tmp_reg & DMA_MODE_EB)? TRUE : FALSE);
-+
-+    tmp_reg = ioread32be(&fman_rg->fpm_rg->fmfp_mxd);
-+    cfg->disp_limit_tsh          = (uint8_t)((tmp_reg & FPM_DISP_LIMIT_MASK) >> FPM_DISP_LIMIT_SHIFT);
-+
-+    tmp_reg = ioread32be(&fman_rg->fpm_rg->fmfp_dist1);
-+    cfg->prs_disp_tsh            = (uint8_t)((tmp_reg & FPM_THR1_PRS_MASK ) >> FPM_THR1_PRS_SHIFT);
-+    cfg->plcr_disp_tsh           = (uint8_t)((tmp_reg & FPM_THR1_KG_MASK ) >> FPM_THR1_KG_SHIFT);
-+    cfg->kg_disp_tsh             = (uint8_t)((tmp_reg & FPM_THR1_PLCR_MASK ) >> FPM_THR1_PLCR_SHIFT);
-+    cfg->bmi_disp_tsh            = (uint8_t)((tmp_reg & FPM_THR1_BMI_MASK ) >> FPM_THR1_BMI_SHIFT);
-+
-+    tmp_reg = ioread32be(&fman_rg->fpm_rg->fmfp_dist2);
-+    cfg->qmi_enq_disp_tsh        = (uint8_t)((tmp_reg & FPM_THR2_QMI_ENQ_MASK ) >> FPM_THR2_QMI_ENQ_SHIFT);
-+    cfg->qmi_deq_disp_tsh        = (uint8_t)((tmp_reg & FPM_THR2_QMI_DEQ_MASK ) >> FPM_THR2_QMI_DEQ_SHIFT);
-+    cfg->fm_ctl1_disp_tsh        = (uint8_t)((tmp_reg & FPM_THR2_FM_CTL1_MASK ) >> FPM_THR2_FM_CTL1_SHIFT);
-+    cfg->fm_ctl2_disp_tsh        = (uint8_t)((tmp_reg & FPM_THR2_FM_CTL2_MASK ) >> FPM_THR2_FM_CTL2_SHIFT);
-+
-+    tmp_reg = ioread32be(&fman_rg->dma_rg->fmdmsetr);
-+    cfg->dma_sos_emergency       = tmp_reg;
-+
-+    tmp_reg = ioread32be(&fman_rg->dma_rg->fmdmwcr);
-+    cfg->dma_watchdog            = tmp_reg/cfg->clk_freq;
-+
-+    tmp_reg = ioread32be(&fman_rg->dma_rg->fmdmemsr);
-+    cfg->dma_en_emergency_smoother = (bool)((tmp_reg & DMA_EMSR_EMSTR_MASK)? TRUE : FALSE);
-+    cfg->dma_emergency_switch_counter = (tmp_reg & DMA_EMSR_EMSTR_MASK);
-+}
-+
-+void fman_reset(struct fman_fpm_regs *fpm_rg)
-+{
-+	iowrite32be(FPM_RSTC_FM_RESET, &fpm_rg->fm_rstc);
-+}
-+
-+/**************************************************************************//**
-+ @Function      FM_Init
-+
-+ @Description   Initializes the FM module
-+
-+ @Param[in]     h_Fm - FM module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+int fman_dma_init(struct fman_dma_regs *dma_rg, struct fman_cfg *cfg)
-+{
-+	uint32_t    tmp_reg;
-+
-+	/**********************/
-+	/* Init DMA Registers */
-+	/**********************/
-+	/* clear status reg events */
-+	/* oren - check!!!  */
-+	tmp_reg = (DMA_STATUS_BUS_ERR | DMA_STATUS_READ_ECC |
-+			DMA_STATUS_SYSTEM_WRITE_ECC | DMA_STATUS_FM_WRITE_ECC);
-+	iowrite32be(ioread32be(&dma_rg->fmdmsr) | tmp_reg,
-+			&dma_rg->fmdmsr);
-+
-+	/* configure mode register */
-+	tmp_reg = 0;
-+	tmp_reg |= cfg->dma_cache_override << DMA_MODE_CACHE_OR_SHIFT;
-+	if (cfg->dma_aid_override)
-+		tmp_reg |= DMA_MODE_AID_OR;
-+	if (cfg->exceptions & FMAN_EX_DMA_BUS_ERROR)
-+		tmp_reg |= DMA_MODE_BER;
-+	if ((cfg->exceptions & FMAN_EX_DMA_SYSTEM_WRITE_ECC) |
-+		(cfg->exceptions & FMAN_EX_DMA_READ_ECC) |
-+		(cfg->exceptions & FMAN_EX_DMA_FM_WRITE_ECC))
-+		tmp_reg |= DMA_MODE_ECC;
-+	if (cfg->dma_stop_on_bus_error)
-+		tmp_reg |= DMA_MODE_SBER;
-+	if(cfg->dma_axi_dbg_num_of_beats)
-+	    tmp_reg |= (uint32_t)(DMA_MODE_AXI_DBG_MASK &
-+		           ((cfg->dma_axi_dbg_num_of_beats - 1) << DMA_MODE_AXI_DBG_SHIFT));
-+
-+	if (cfg->dma_en_emergency) {
-+		tmp_reg |= cfg->dma_emergency_bus_select;
-+		tmp_reg |= cfg->dma_emergency_level << DMA_MODE_EMER_LVL_SHIFT;
-+	if (cfg->dma_en_emergency_smoother)
-+		iowrite32be(cfg->dma_emergency_switch_counter,
-+				&dma_rg->fmdmemsr);
-+	}
-+	tmp_reg |= ((cfg->dma_cam_num_of_entries / DMA_CAM_UNITS) - 1) <<
-+			DMA_MODE_CEN_SHIFT;
-+	tmp_reg |= DMA_MODE_SECURE_PROT;
-+	tmp_reg |= cfg->dma_dbg_cnt_mode << DMA_MODE_DBG_SHIFT;
-+	tmp_reg |= cfg->dma_aid_mode << DMA_MODE_AID_MODE_SHIFT;
-+
-+	if (cfg->pedantic_dma)
-+		tmp_reg |= DMA_MODE_EMER_READ;
-+
-+	iowrite32be(tmp_reg, &dma_rg->fmdmmr);
-+
-+	/* configure thresholds register */
-+	tmp_reg = ((uint32_t)cfg->dma_comm_qtsh_asrt_emer <<
-+			DMA_THRESH_COMMQ_SHIFT) |
-+			((uint32_t)cfg->dma_read_buf_tsh_asrt_emer <<
-+			DMA_THRESH_READ_INT_BUF_SHIFT) |
-+			((uint32_t)cfg->dma_write_buf_tsh_asrt_emer);
-+
-+	iowrite32be(tmp_reg, &dma_rg->fmdmtr);
-+
-+	/* configure hysteresis register */
-+	tmp_reg = ((uint32_t)cfg->dma_comm_qtsh_clr_emer <<
-+		DMA_THRESH_COMMQ_SHIFT) |
-+		((uint32_t)cfg->dma_read_buf_tsh_clr_emer <<
-+		DMA_THRESH_READ_INT_BUF_SHIFT) |
-+		((uint32_t)cfg->dma_write_buf_tsh_clr_emer);
-+
-+	iowrite32be(tmp_reg, &dma_rg->fmdmhy);
-+
-+	/* configure emergency threshold */
-+	iowrite32be(cfg->dma_sos_emergency, &dma_rg->fmdmsetr);
-+
-+	/* configure Watchdog */
-+	iowrite32be((cfg->dma_watchdog * cfg->clk_freq),
-+			&dma_rg->fmdmwcr);
-+
-+	iowrite32be(cfg->cam_base_addr, &dma_rg->fmdmebcr);
-+
-+	return 0;
-+}
-+
-+int fman_fpm_init(struct fman_fpm_regs *fpm_rg, struct fman_cfg *cfg)
-+{
-+	uint32_t tmp_reg;
-+	int i;
-+
-+	/**********************/
-+	/* Init FPM Registers */
-+	/**********************/
-+	tmp_reg = (uint32_t)(cfg->disp_limit_tsh << FPM_DISP_LIMIT_SHIFT);
-+	iowrite32be(tmp_reg, &fpm_rg->fmfp_mxd);
-+
-+	tmp_reg = (((uint32_t)cfg->prs_disp_tsh << FPM_THR1_PRS_SHIFT) |
-+		((uint32_t)cfg->kg_disp_tsh << FPM_THR1_KG_SHIFT) |
-+		((uint32_t)cfg->plcr_disp_tsh << FPM_THR1_PLCR_SHIFT) |
-+		((uint32_t)cfg->bmi_disp_tsh << FPM_THR1_BMI_SHIFT));
-+	iowrite32be(tmp_reg, &fpm_rg->fmfp_dist1);
-+
-+	tmp_reg = (((uint32_t)cfg->qmi_enq_disp_tsh << FPM_THR2_QMI_ENQ_SHIFT) |
-+		((uint32_t)cfg->qmi_deq_disp_tsh << FPM_THR2_QMI_DEQ_SHIFT) |
-+		((uint32_t)cfg->fm_ctl1_disp_tsh << FPM_THR2_FM_CTL1_SHIFT) |
-+		((uint32_t)cfg->fm_ctl2_disp_tsh << FPM_THR2_FM_CTL2_SHIFT));
-+	iowrite32be(tmp_reg, &fpm_rg->fmfp_dist2);
-+
-+	/* define exceptions and error behavior */
-+	tmp_reg = 0;
-+	/* Clear events */
-+	tmp_reg |= (FPM_EV_MASK_STALL | FPM_EV_MASK_DOUBLE_ECC |
-+		FPM_EV_MASK_SINGLE_ECC);
-+	/* enable interrupts */
-+	if (cfg->exceptions & FMAN_EX_FPM_STALL_ON_TASKS)
-+		tmp_reg |= FPM_EV_MASK_STALL_EN;
-+	if (cfg->exceptions & FMAN_EX_FPM_SINGLE_ECC)
-+		tmp_reg |= FPM_EV_MASK_SINGLE_ECC_EN;
-+	if (cfg->exceptions & FMAN_EX_FPM_DOUBLE_ECC)
-+		tmp_reg |= FPM_EV_MASK_DOUBLE_ECC_EN;
-+	tmp_reg |= (cfg->catastrophic_err  << FPM_EV_MASK_CAT_ERR_SHIFT);
-+	tmp_reg |= (cfg->dma_err << FPM_EV_MASK_DMA_ERR_SHIFT);
-+	if (!cfg->halt_on_external_activ)
-+		tmp_reg |= FPM_EV_MASK_EXTERNAL_HALT;
-+	if (!cfg->halt_on_unrecov_ecc_err)
-+		tmp_reg |= FPM_EV_MASK_ECC_ERR_HALT;
-+	iowrite32be(tmp_reg, &fpm_rg->fmfp_ee);
-+
-+	/* clear all fmCtls event registers */
-+	for (i = 0; i < cfg->num_of_fman_ctrl_evnt_regs; i++)
-+		iowrite32be(0xFFFFFFFF, &fpm_rg->fmfp_cev[i]);
-+
-+	/* RAM ECC -  enable and clear events*/
-+	/* first we need to clear all parser memory,
-+	 * as it is uninitialized and may cause ECC errors */
-+	/* event bits */
-+	tmp_reg = (FPM_RAM_MURAM_ECC | FPM_RAM_IRAM_ECC);
-+	/* Rams enable not effected by RCR bit, but by a COP configuration */
-+	if (cfg->external_ecc_rams_enable)
-+		tmp_reg |= FPM_RAM_RAMS_ECC_EN_SRC_SEL;
-+
-+	/* enable test mode */
-+	if (cfg->en_muram_test_mode)
-+		tmp_reg |= FPM_RAM_MURAM_TEST_ECC;
-+	if (cfg->en_iram_test_mode)
-+		tmp_reg |= FPM_RAM_IRAM_TEST_ECC;
-+	iowrite32be(tmp_reg, &fpm_rg->fm_rcr);
-+
-+	tmp_reg = 0;
-+	if (cfg->exceptions & FMAN_EX_IRAM_ECC) {
-+		tmp_reg |= FPM_IRAM_ECC_ERR_EX_EN;
-+		fman_enable_rams_ecc(fpm_rg);
-+	}
-+	if (cfg->exceptions & FMAN_EX_NURAM_ECC) {
-+		tmp_reg |= FPM_MURAM_ECC_ERR_EX_EN;
-+		fman_enable_rams_ecc(fpm_rg);
-+	}
-+	iowrite32be(tmp_reg, &fpm_rg->fm_rie);
-+
-+	return 0;
-+}
-+
-+int fman_bmi_init(struct fman_bmi_regs *bmi_rg, struct fman_cfg *cfg)
-+{
-+	uint32_t tmp_reg;
-+
-+	/**********************/
-+	/* Init BMI Registers */
-+	/**********************/
-+
-+	/* define common resources */
-+	tmp_reg = cfg->fifo_base_addr;
-+	tmp_reg = tmp_reg / BMI_FIFO_ALIGN;
-+
-+	tmp_reg |= ((cfg->total_fifo_size / FMAN_BMI_FIFO_UNITS - 1) <<
-+			BMI_CFG1_FIFO_SIZE_SHIFT);
-+	iowrite32be(tmp_reg, &bmi_rg->fmbm_cfg1);
-+
-+	tmp_reg = ((uint32_t)(cfg->total_num_of_tasks - 1) <<
-+			BMI_CFG2_TASKS_SHIFT);
-+	/* num of DMA's will be dynamically updated when each port is set */
-+	iowrite32be(tmp_reg, &bmi_rg->fmbm_cfg2);
-+
-+	/* define unmaskable exceptions, enable and clear events */
-+	tmp_reg = 0;
-+	iowrite32be(BMI_ERR_INTR_EN_LIST_RAM_ECC |
-+			BMI_ERR_INTR_EN_STORAGE_PROFILE_ECC |
-+			BMI_ERR_INTR_EN_STATISTICS_RAM_ECC |
-+			BMI_ERR_INTR_EN_DISPATCH_RAM_ECC,
-+			&bmi_rg->fmbm_ievr);
-+
-+	if (cfg->exceptions & FMAN_EX_BMI_LIST_RAM_ECC)
-+		tmp_reg |= BMI_ERR_INTR_EN_LIST_RAM_ECC;
-+	if (cfg->exceptions & FMAN_EX_BMI_PIPELINE_ECC)
-+		tmp_reg |= BMI_ERR_INTR_EN_STORAGE_PROFILE_ECC;
-+	if (cfg->exceptions & FMAN_EX_BMI_STATISTICS_RAM_ECC)
-+		tmp_reg |= BMI_ERR_INTR_EN_STATISTICS_RAM_ECC;
-+	if (cfg->exceptions & FMAN_EX_BMI_DISPATCH_RAM_ECC)
-+		tmp_reg |= BMI_ERR_INTR_EN_DISPATCH_RAM_ECC;
-+	iowrite32be(tmp_reg, &bmi_rg->fmbm_ier);
-+
-+	return 0;
-+}
-+
-+int fman_qmi_init(struct fman_qmi_regs *qmi_rg, struct fman_cfg *cfg)
-+{
-+	uint32_t tmp_reg;
-+	uint16_t period_in_fm_clocks;
-+	uint8_t remainder;
-+	/**********************/
-+	/* Init QMI Registers */
-+	/**********************/
-+	/* Clear error interrupt events */
-+
-+	iowrite32be(QMI_ERR_INTR_EN_DOUBLE_ECC | QMI_ERR_INTR_EN_DEQ_FROM_DEF,
-+			&qmi_rg->fmqm_eie);
-+	tmp_reg = 0;
-+	if (cfg->exceptions & FMAN_EX_QMI_DEQ_FROM_UNKNOWN_PORTID)
-+		tmp_reg |= QMI_ERR_INTR_EN_DEQ_FROM_DEF;
-+	if (cfg->exceptions & FMAN_EX_QMI_DOUBLE_ECC)
-+		tmp_reg |= QMI_ERR_INTR_EN_DOUBLE_ECC;
-+	/* enable events */
-+	iowrite32be(tmp_reg, &qmi_rg->fmqm_eien);
-+
-+	if (cfg->tnum_aging_period) {
-+		/* tnum_aging_period is in units of usec, p_FmClockFreq in Mhz */
-+		period_in_fm_clocks = (uint16_t)
-+				(cfg->tnum_aging_period * cfg->clk_freq);
-+		/* period_in_fm_clocks must be a 64 multiply */
-+		remainder = (uint8_t)(period_in_fm_clocks % 64);
-+		if (remainder)
-+			tmp_reg = (uint32_t)((period_in_fm_clocks / 64) + 1);
-+		else{
-+			tmp_reg = (uint32_t)(period_in_fm_clocks / 64);
-+			if (!tmp_reg)
-+				tmp_reg = 1;
-+		}
-+		tmp_reg <<= QMI_TAPC_TAP;
-+		iowrite32be(tmp_reg, &qmi_rg->fmqm_tapc);
-+	}
-+	tmp_reg = 0;
-+	/* Clear interrupt events */
-+	iowrite32be(QMI_INTR_EN_SINGLE_ECC, &qmi_rg->fmqm_ie);
-+	if (cfg->exceptions & FMAN_EX_QMI_SINGLE_ECC)
-+		tmp_reg |= QMI_INTR_EN_SINGLE_ECC;
-+	/* enable events */
-+	iowrite32be(tmp_reg, &qmi_rg->fmqm_ien);
-+
-+	return 0;
-+}
-+
-+int fman_enable(struct fman_rg *fman_rg, struct fman_cfg *cfg)
-+{
-+	uint32_t cfg_reg = 0;
-+
-+	/**********************/
-+	/* Enable all modules */
-+	/**********************/
-+	/* clear & enable global counters  - calculate reg and save for later,
-+	because it's the same reg for QMI enable */
-+	cfg_reg = QMI_CFG_EN_COUNTERS;
-+	if (cfg->qmi_deq_option_support)
-+		cfg_reg |= (uint32_t)(((cfg->qmi_def_tnums_thresh) << 8) |
-+				(uint32_t)cfg->qmi_def_tnums_thresh);
-+
-+	iowrite32be(BMI_INIT_START, &fman_rg->bmi_rg->fmbm_init);
-+	iowrite32be(cfg_reg | QMI_CFG_ENQ_EN | QMI_CFG_DEQ_EN,
-+			&fman_rg->qmi_rg->fmqm_gc);
-+
-+	return 0;
-+}
-+
-+void fman_free_resources(struct fman_rg *fman_rg)
-+{
-+	/* disable BMI and QMI */
-+	iowrite32be(0, &fman_rg->bmi_rg->fmbm_init);
-+	iowrite32be(0, &fman_rg->qmi_rg->fmqm_gc);
-+
-+	/* release BMI resources */
-+	iowrite32be(0, &fman_rg->bmi_rg->fmbm_cfg2);
-+	iowrite32be(0, &fman_rg->bmi_rg->fmbm_cfg1);
-+
-+	/* disable ECC */
-+	iowrite32be(0, &fman_rg->fpm_rg->fm_rcr);
-+}
-+
-+/****************************************************/
-+/*       API Run-time Control uint functions        */
-+/****************************************************/
-+uint32_t fman_get_normal_pending(struct fman_fpm_regs *fpm_rg)
-+{
-+	return ioread32be(&fpm_rg->fm_npi);
-+}
-+
-+uint32_t fman_get_controller_event(struct fman_fpm_regs *fpm_rg, uint8_t reg_id)
-+{
-+	uint32_t event;
-+
-+	event = ioread32be(&fpm_rg->fmfp_fcev[reg_id]) &
-+			ioread32be(&fpm_rg->fmfp_cee[reg_id]);
-+	iowrite32be(event, &fpm_rg->fmfp_cev[reg_id]);
-+
-+	return event;
-+}
-+
-+uint32_t fman_get_error_pending(struct fman_fpm_regs *fpm_rg)
-+{
-+	return ioread32be(&fpm_rg->fm_epi);
-+}
-+
-+void fman_set_ports_bandwidth(struct fman_bmi_regs *bmi_rg, uint8_t *weights)
-+{
-+	int i;
-+	uint8_t shift;
-+	uint32_t tmp = 0;
-+
-+	for (i = 0; i < 64; i++) {
-+		if (weights[i] > 1) { /* no need to write 1 since it is 0 */
-+			/* Add this port to tmp_reg */
-+			/* (each 8 ports result in one register)*/
-+			shift = (uint8_t)(32 - 4 * ((i % 8) + 1));
-+			tmp |= ((weights[i] - 1) << shift);
-+		}
-+		if (i % 8 == 7) { /* last in this set */
-+			iowrite32be(tmp, &bmi_rg->fmbm_arb[i / 8]);
-+			tmp = 0;
-+		}
-+	}
-+}
-+
-+void fman_enable_rams_ecc(struct fman_fpm_regs *fpm_rg)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&fpm_rg->fm_rcr);
-+	if (tmp & FPM_RAM_RAMS_ECC_EN_SRC_SEL)
-+		iowrite32be(tmp | FPM_RAM_IRAM_ECC_EN,
-+				&fpm_rg->fm_rcr);
-+	else
-+		iowrite32be(tmp | FPM_RAM_RAMS_ECC_EN |
-+				FPM_RAM_IRAM_ECC_EN,
-+				&fpm_rg->fm_rcr);
-+}
-+
-+void fman_disable_rams_ecc(struct fman_fpm_regs *fpm_rg)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&fpm_rg->fm_rcr);
-+	if (tmp & FPM_RAM_RAMS_ECC_EN_SRC_SEL)
-+		iowrite32be(tmp & ~FPM_RAM_IRAM_ECC_EN,
-+				&fpm_rg->fm_rcr);
-+	else
-+		iowrite32be(tmp & ~(FPM_RAM_RAMS_ECC_EN | FPM_RAM_IRAM_ECC_EN),
-+				&fpm_rg->fm_rcr);
-+}
-+
-+int fman_set_exception(struct fman_rg *fman_rg,
-+			enum fman_exceptions exception,
-+			bool enable)
-+{
-+	uint32_t tmp;
-+
-+	switch (exception) {
-+	case(E_FMAN_EX_DMA_BUS_ERROR):
-+		tmp = ioread32be(&fman_rg->dma_rg->fmdmmr);
-+		if (enable)
-+			tmp |= DMA_MODE_BER;
-+		else
-+			tmp &= ~DMA_MODE_BER;
-+		/* disable bus error */
-+		iowrite32be(tmp, &fman_rg->dma_rg->fmdmmr);
-+		break;
-+	case(E_FMAN_EX_DMA_READ_ECC):
-+	case(E_FMAN_EX_DMA_SYSTEM_WRITE_ECC):
-+	case(E_FMAN_EX_DMA_FM_WRITE_ECC):
-+		tmp = ioread32be(&fman_rg->dma_rg->fmdmmr);
-+		if (enable)
-+			tmp |= DMA_MODE_ECC;
-+		else
-+			tmp &= ~DMA_MODE_ECC;
-+		iowrite32be(tmp, &fman_rg->dma_rg->fmdmmr);
-+		break;
-+	case(E_FMAN_EX_FPM_STALL_ON_TASKS):
-+		tmp = ioread32be(&fman_rg->fpm_rg->fmfp_ee);
-+		if (enable)
-+			tmp |= FPM_EV_MASK_STALL_EN;
-+		else
-+			tmp &= ~FPM_EV_MASK_STALL_EN;
-+		iowrite32be(tmp, &fman_rg->fpm_rg->fmfp_ee);
-+		break;
-+	case(E_FMAN_EX_FPM_SINGLE_ECC):
-+		tmp = ioread32be(&fman_rg->fpm_rg->fmfp_ee);
-+		if (enable)
-+			tmp |= FPM_EV_MASK_SINGLE_ECC_EN;
-+		else
-+			tmp &= ~FPM_EV_MASK_SINGLE_ECC_EN;
-+		iowrite32be(tmp, &fman_rg->fpm_rg->fmfp_ee);
-+		break;
-+	case(E_FMAN_EX_FPM_DOUBLE_ECC):
-+		tmp = ioread32be(&fman_rg->fpm_rg->fmfp_ee);
-+		if (enable)
-+			tmp |= FPM_EV_MASK_DOUBLE_ECC_EN;
-+		else
-+			tmp &= ~FPM_EV_MASK_DOUBLE_ECC_EN;
-+		iowrite32be(tmp, &fman_rg->fpm_rg->fmfp_ee);
-+		break;
-+	case(E_FMAN_EX_QMI_SINGLE_ECC):
-+		tmp = ioread32be(&fman_rg->qmi_rg->fmqm_ien);
-+		if (enable)
-+			tmp |= QMI_INTR_EN_SINGLE_ECC;
-+		else
-+			tmp &= ~QMI_INTR_EN_SINGLE_ECC;
-+		iowrite32be(tmp, &fman_rg->qmi_rg->fmqm_ien);
-+		break;
-+	case(E_FMAN_EX_QMI_DOUBLE_ECC):
-+		tmp = ioread32be(&fman_rg->qmi_rg->fmqm_eien);
-+		if (enable)
-+			tmp |= QMI_ERR_INTR_EN_DOUBLE_ECC;
-+		else
-+			tmp &= ~QMI_ERR_INTR_EN_DOUBLE_ECC;
-+		iowrite32be(tmp, &fman_rg->qmi_rg->fmqm_eien);
-+		break;
-+	case(E_FMAN_EX_QMI_DEQ_FROM_UNKNOWN_PORTID):
-+		tmp = ioread32be(&fman_rg->qmi_rg->fmqm_eien);
-+		if (enable)
-+			tmp |= QMI_ERR_INTR_EN_DEQ_FROM_DEF;
-+		else
-+			tmp &= ~QMI_ERR_INTR_EN_DEQ_FROM_DEF;
-+		iowrite32be(tmp, &fman_rg->qmi_rg->fmqm_eien);
-+		break;
-+	case(E_FMAN_EX_BMI_LIST_RAM_ECC):
-+		tmp = ioread32be(&fman_rg->bmi_rg->fmbm_ier);
-+		if (enable)
-+			tmp |= BMI_ERR_INTR_EN_LIST_RAM_ECC;
-+		else
-+			tmp &= ~BMI_ERR_INTR_EN_LIST_RAM_ECC;
-+		iowrite32be(tmp, &fman_rg->bmi_rg->fmbm_ier);
-+		break;
-+	case(E_FMAN_EX_BMI_STORAGE_PROFILE_ECC):
-+		tmp = ioread32be(&fman_rg->bmi_rg->fmbm_ier);
-+		if (enable)
-+			tmp |= BMI_ERR_INTR_EN_STORAGE_PROFILE_ECC;
-+		else
-+			tmp &= ~BMI_ERR_INTR_EN_STORAGE_PROFILE_ECC;
-+		iowrite32be(tmp, &fman_rg->bmi_rg->fmbm_ier);
-+		break;
-+	case(E_FMAN_EX_BMI_STATISTICS_RAM_ECC):
-+		tmp = ioread32be(&fman_rg->bmi_rg->fmbm_ier);
-+		if (enable)
-+			tmp |= BMI_ERR_INTR_EN_STATISTICS_RAM_ECC;
-+		else
-+			tmp &= ~BMI_ERR_INTR_EN_STATISTICS_RAM_ECC;
-+		iowrite32be(tmp, &fman_rg->bmi_rg->fmbm_ier);
-+		break;
-+	case(E_FMAN_EX_BMI_DISPATCH_RAM_ECC):
-+		tmp = ioread32be(&fman_rg->bmi_rg->fmbm_ier);
-+		if (enable)
-+			tmp |= BMI_ERR_INTR_EN_DISPATCH_RAM_ECC;
-+		else
-+			tmp &= ~BMI_ERR_INTR_EN_DISPATCH_RAM_ECC;
-+		iowrite32be(tmp, &fman_rg->bmi_rg->fmbm_ier);
-+		break;
-+	case(E_FMAN_EX_IRAM_ECC):
-+		tmp = ioread32be(&fman_rg->fpm_rg->fm_rie);
-+		if (enable) {
-+			/* enable ECC if not enabled */
-+			fman_enable_rams_ecc(fman_rg->fpm_rg);
-+			/* enable ECC interrupts */
-+			tmp |= FPM_IRAM_ECC_ERR_EX_EN;
-+		} else {
-+			/* ECC mechanism may be disabled,
-+			 * depending on driver status  */
-+			fman_disable_rams_ecc(fman_rg->fpm_rg);
-+			tmp &= ~FPM_IRAM_ECC_ERR_EX_EN;
-+		}
-+		iowrite32be(tmp, &fman_rg->fpm_rg->fm_rie);
-+		break;
-+	case(E_FMAN_EX_MURAM_ECC):
-+		tmp = ioread32be(&fman_rg->fpm_rg->fm_rie);
-+		if (enable) {
-+			/* enable ECC if not enabled */
-+			fman_enable_rams_ecc(fman_rg->fpm_rg);
-+			/* enable ECC interrupts */
-+			tmp |= FPM_MURAM_ECC_ERR_EX_EN;
-+		} else {
-+			/* ECC mechanism may be disabled,
-+			 * depending on driver status  */
-+			fman_disable_rams_ecc(fman_rg->fpm_rg);
-+			tmp &= ~FPM_MURAM_ECC_ERR_EX_EN;
-+		}
-+		iowrite32be(tmp, &fman_rg->fpm_rg->fm_rie);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+	return 0;
-+}
-+
-+void fman_get_revision(struct fman_fpm_regs *fpm_rg,
-+			uint8_t *major,
-+			uint8_t *minor)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&fpm_rg->fm_ip_rev_1);
-+	*major = (uint8_t)((tmp & FPM_REV1_MAJOR_MASK) >> FPM_REV1_MAJOR_SHIFT);
-+	*minor = (uint8_t)((tmp & FPM_REV1_MINOR_MASK) >> FPM_REV1_MINOR_SHIFT);
-+
-+}
-+
-+uint32_t fman_get_counter(struct fman_rg *fman_rg,
-+				enum fman_counters reg_name)
-+{
-+	uint32_t ret_val;
-+
-+	switch (reg_name) {
-+	case(E_FMAN_COUNTERS_ENQ_TOTAL_FRAME):
-+		ret_val = ioread32be(&fman_rg->qmi_rg->fmqm_etfc);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_TOTAL_FRAME):
-+		ret_val = ioread32be(&fman_rg->qmi_rg->fmqm_dtfc);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_0):
-+		ret_val = ioread32be(&fman_rg->qmi_rg->fmqm_dc0);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_1):
-+		ret_val = ioread32be(&fman_rg->qmi_rg->fmqm_dc1);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_2):
-+		ret_val = ioread32be(&fman_rg->qmi_rg->fmqm_dc2);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_3):
-+		ret_val = ioread32be(&fman_rg->qmi_rg->fmqm_dc3);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_FROM_DEFAULT):
-+		ret_val = ioread32be(&fman_rg->qmi_rg->fmqm_dfdc);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_FROM_CONTEXT):
-+		ret_val = ioread32be(&fman_rg->qmi_rg->fmqm_dfcc);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_FROM_FD):
-+		ret_val = ioread32be(&fman_rg->qmi_rg->fmqm_dffc);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_CONFIRM):
-+		ret_val = ioread32be(&fman_rg->qmi_rg->fmqm_dcc);
-+		break;
-+	default:
-+		ret_val = 0;
-+	}
-+	return ret_val;
-+}
-+
-+int fman_modify_counter(struct fman_rg *fman_rg,
-+			enum fman_counters reg_name,
-+			uint32_t val)
-+{
-+	/* When applicable (when there is an 'enable counters' bit,
-+	 * check that counters are enabled */
-+	switch (reg_name) {
-+	case(E_FMAN_COUNTERS_ENQ_TOTAL_FRAME):
-+	case(E_FMAN_COUNTERS_DEQ_TOTAL_FRAME):
-+	case(E_FMAN_COUNTERS_DEQ_0):
-+	case(E_FMAN_COUNTERS_DEQ_1):
-+	case(E_FMAN_COUNTERS_DEQ_2):
-+	case(E_FMAN_COUNTERS_DEQ_3):
-+	case(E_FMAN_COUNTERS_DEQ_FROM_DEFAULT):
-+	case(E_FMAN_COUNTERS_DEQ_FROM_CONTEXT):
-+	case(E_FMAN_COUNTERS_DEQ_FROM_FD):
-+	case(E_FMAN_COUNTERS_DEQ_CONFIRM):
-+		if (!(ioread32be(&fman_rg->qmi_rg->fmqm_gc) &
-+				QMI_CFG_EN_COUNTERS))
-+			return -EINVAL;
-+		break;
-+	default:
-+		break;
-+	}
-+	/* Set counter */
-+	switch (reg_name) {
-+	case(E_FMAN_COUNTERS_ENQ_TOTAL_FRAME):
-+		iowrite32be(val, &fman_rg->qmi_rg->fmqm_etfc);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_TOTAL_FRAME):
-+		iowrite32be(val, &fman_rg->qmi_rg->fmqm_dtfc);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_0):
-+		iowrite32be(val, &fman_rg->qmi_rg->fmqm_dc0);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_1):
-+		iowrite32be(val, &fman_rg->qmi_rg->fmqm_dc1);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_2):
-+		iowrite32be(val, &fman_rg->qmi_rg->fmqm_dc2);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_3):
-+		iowrite32be(val, &fman_rg->qmi_rg->fmqm_dc3);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_FROM_DEFAULT):
-+		iowrite32be(val, &fman_rg->qmi_rg->fmqm_dfdc);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_FROM_CONTEXT):
-+		iowrite32be(val, &fman_rg->qmi_rg->fmqm_dfcc);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_FROM_FD):
-+		iowrite32be(val, &fman_rg->qmi_rg->fmqm_dffc);
-+		break;
-+	case(E_FMAN_COUNTERS_DEQ_CONFIRM):
-+		iowrite32be(val, &fman_rg->qmi_rg->fmqm_dcc);
-+		break;
-+	case(E_FMAN_COUNTERS_SEMAPHOR_ENTRY_FULL_REJECT):
-+		iowrite32be(val, &fman_rg->dma_rg->fmdmsefrc);
-+		break;
-+	case(E_FMAN_COUNTERS_SEMAPHOR_QUEUE_FULL_REJECT):
-+		iowrite32be(val, &fman_rg->dma_rg->fmdmsqfrc);
-+		break;
-+	case(E_FMAN_COUNTERS_SEMAPHOR_SYNC_REJECT):
-+		iowrite32be(val, &fman_rg->dma_rg->fmdmssrc);
-+		break;
-+	default:
-+		break;
-+	}
-+	return 0;
-+}
-+
-+void fman_set_dma_emergency(struct fman_dma_regs *dma_rg,
-+				bool is_write,
-+				bool enable)
-+{
-+	uint32_t msk;
-+
-+	msk = (uint32_t)(is_write ? DMA_MODE_EMER_WRITE : DMA_MODE_EMER_READ);
-+
-+	if (enable)
-+		iowrite32be(ioread32be(&dma_rg->fmdmmr) | msk,
-+				&dma_rg->fmdmmr);
-+	else /* disable */
-+		iowrite32be(ioread32be(&dma_rg->fmdmmr) & ~msk,
-+				&dma_rg->fmdmmr);
-+}
-+
-+void fman_set_dma_ext_bus_pri(struct fman_dma_regs *dma_rg, uint32_t pri)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&dma_rg->fmdmmr) |
-+			(pri << DMA_MODE_BUS_PRI_SHIFT);
-+
-+	iowrite32be(tmp, &dma_rg->fmdmmr);
-+}
-+
-+uint32_t fman_get_dma_status(struct fman_dma_regs *dma_rg)
-+{
-+	return ioread32be(&dma_rg->fmdmsr);
-+}
-+
-+void fman_force_intr(struct fman_rg *fman_rg,
-+		enum fman_exceptions exception)
-+{
-+	switch (exception) {
-+	case E_FMAN_EX_QMI_DEQ_FROM_UNKNOWN_PORTID:
-+		iowrite32be(QMI_ERR_INTR_EN_DEQ_FROM_DEF,
-+				&fman_rg->qmi_rg->fmqm_eif);
-+		break;
-+	case E_FMAN_EX_QMI_SINGLE_ECC:
-+		iowrite32be(QMI_INTR_EN_SINGLE_ECC,
-+				&fman_rg->qmi_rg->fmqm_if);
-+		break;
-+	case E_FMAN_EX_QMI_DOUBLE_ECC:
-+		iowrite32be(QMI_ERR_INTR_EN_DOUBLE_ECC,
-+				&fman_rg->qmi_rg->fmqm_eif);
-+		break;
-+	case E_FMAN_EX_BMI_LIST_RAM_ECC:
-+		iowrite32be(BMI_ERR_INTR_EN_LIST_RAM_ECC,
-+				&fman_rg->bmi_rg->fmbm_ifr);
-+		break;
-+	case E_FMAN_EX_BMI_STORAGE_PROFILE_ECC:
-+		iowrite32be(BMI_ERR_INTR_EN_STORAGE_PROFILE_ECC,
-+				&fman_rg->bmi_rg->fmbm_ifr);
-+		break;
-+	case E_FMAN_EX_BMI_STATISTICS_RAM_ECC:
-+		iowrite32be(BMI_ERR_INTR_EN_STATISTICS_RAM_ECC,
-+				&fman_rg->bmi_rg->fmbm_ifr);
-+		break;
-+	case E_FMAN_EX_BMI_DISPATCH_RAM_ECC:
-+		iowrite32be(BMI_ERR_INTR_EN_DISPATCH_RAM_ECC,
-+				&fman_rg->bmi_rg->fmbm_ifr);
-+		break;
-+	default:
-+		break;
-+	}
-+}
-+
-+bool fman_is_qmi_halt_not_busy_state(struct fman_qmi_regs *qmi_rg)
-+{
-+	return (bool)!!(ioread32be(&qmi_rg->fmqm_gs) & QMI_GS_HALT_NOT_BUSY);
-+}
-+void fman_resume(struct fman_fpm_regs *fpm_rg)
-+{
-+	uint32_t tmp;
-+
-+	tmp = ioread32be(&fpm_rg->fmfp_ee);
-+	/* clear tmp_reg event bits in order not to clear standing events */
-+	tmp &= ~(FPM_EV_MASK_DOUBLE_ECC |
-+			FPM_EV_MASK_STALL |
-+			FPM_EV_MASK_SINGLE_ECC);
-+	tmp |= FPM_EV_MASK_RELEASE_FM;
-+
-+	iowrite32be(tmp, &fpm_rg->fmfp_ee);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/inc/fm_common.h
-@@ -0,0 +1,1214 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_common.h
-+
-+ @Description   FM internal structures and definitions.
-+*//***************************************************************************/
-+#ifndef __FM_COMMON_H
-+#define __FM_COMMON_H
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+#include "fm_pcd_ext.h"
-+#include "fm_ext.h"
-+#include "fm_port_ext.h"
-+
-+
-+#define e_FM_PORT_TYPE_OH_HOST_COMMAND      e_FM_PORT_TYPE_DUMMY
-+
-+#define CLS_PLAN_NUM_PER_GRP                        8
-+
-+#define IP_OFFLOAD_PACKAGE_NUMBER                   106
-+#define CAPWAP_OFFLOAD_PACKAGE_NUMBER               108
-+#define IS_OFFLOAD_PACKAGE(num) ((num == IP_OFFLOAD_PACKAGE_NUMBER) || (num == CAPWAP_OFFLOAD_PACKAGE_NUMBER))
-+
-+
-+
-+/**************************************************************************//**
-+ @Description       Modules registers offsets
-+*//***************************************************************************/
-+#define FM_MM_MURAM             0x00000000
-+#define FM_MM_BMI               0x00080000
-+#define FM_MM_QMI               0x00080400
-+#define FM_MM_PRS               0x000c7000
-+#define FM_MM_KG                0x000C1000
-+#define FM_MM_DMA               0x000C2000
-+#define FM_MM_FPM               0x000C3000
-+#define FM_MM_PLCR              0x000C0000
-+#define FM_MM_IMEM              0x000C4000
-+#define FM_MM_CGP               0x000DB000
-+#define FM_MM_TRB(i)            (0x000D0200 + 0x400 * (i))
-+#if (DPAA_VERSION >= 11)
-+#define FM_MM_SP                0x000dc000
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+
-+/**************************************************************************//**
-+ @Description   Enum for inter-module interrupts registration
-+*//***************************************************************************/
-+typedef enum e_FmEventModules{
-+    e_FM_MOD_PRS,                   /**< Parser event */
-+    e_FM_MOD_KG,                    /**< Keygen event */
-+    e_FM_MOD_PLCR,                  /**< Policer event */
-+    e_FM_MOD_10G_MAC,               /**< 10G MAC event */
-+    e_FM_MOD_1G_MAC,                /**< 1G MAC event */
-+    e_FM_MOD_TMR,                   /**< Timer event */
-+    e_FM_MOD_FMAN_CTRL,             /**< FMAN Controller  Timer event */
-+    e_FM_MOD_MACSEC,
-+    e_FM_MOD_DUMMY_LAST
-+} e_FmEventModules;
-+
-+/**************************************************************************//**
-+ @Description   Enum for interrupts types
-+*//***************************************************************************/
-+typedef enum e_FmIntrType {
-+    e_FM_INTR_TYPE_ERR,
-+    e_FM_INTR_TYPE_NORMAL
-+} e_FmIntrType;
-+
-+/**************************************************************************//**
-+ @Description   Enum for inter-module interrupts registration
-+*//***************************************************************************/
-+typedef enum e_FmInterModuleEvent
-+{
-+    e_FM_EV_PRS = 0,                /**< Parser event */
-+    e_FM_EV_ERR_PRS,                /**< Parser error event */
-+    e_FM_EV_KG,                     /**< Keygen event */
-+    e_FM_EV_ERR_KG,                 /**< Keygen error event */
-+    e_FM_EV_PLCR,                   /**< Policer event */
-+    e_FM_EV_ERR_PLCR,               /**< Policer error event */
-+    e_FM_EV_ERR_10G_MAC0,           /**< 10G MAC 0 error event */
-+    e_FM_EV_ERR_10G_MAC1,           /**< 10G MAC 1 error event */
-+    e_FM_EV_ERR_1G_MAC0,            /**< 1G MAC 0 error event */
-+    e_FM_EV_ERR_1G_MAC1,            /**< 1G MAC 1 error event */
-+    e_FM_EV_ERR_1G_MAC2,            /**< 1G MAC 2 error event */
-+    e_FM_EV_ERR_1G_MAC3,            /**< 1G MAC 3 error event */
-+    e_FM_EV_ERR_1G_MAC4,            /**< 1G MAC 4 error event */
-+    e_FM_EV_ERR_1G_MAC5,            /**< 1G MAC 5 error event */
-+    e_FM_EV_ERR_1G_MAC6,            /**< 1G MAC 6 error event */
-+    e_FM_EV_ERR_1G_MAC7,            /**< 1G MAC 7 error event */
-+    e_FM_EV_ERR_MACSEC_MAC0,
-+    e_FM_EV_TMR,                    /**< Timer event */
-+    e_FM_EV_10G_MAC0,               /**< 10G MAC 0 event (Magic packet detection)*/
-+    e_FM_EV_10G_MAC1,               /**< 10G MAC 1 event (Magic packet detection)*/
-+    e_FM_EV_1G_MAC0,                /**< 1G MAC 0 event (Magic packet detection)*/
-+    e_FM_EV_1G_MAC1,                /**< 1G MAC 1 event (Magic packet detection)*/
-+    e_FM_EV_1G_MAC2,                /**< 1G MAC 2 (Magic packet detection)*/
-+    e_FM_EV_1G_MAC3,                /**< 1G MAC 3 (Magic packet detection)*/
-+    e_FM_EV_1G_MAC4,                /**< 1G MAC 4 (Magic packet detection)*/
-+    e_FM_EV_1G_MAC5,                /**< 1G MAC 5 (Magic packet detection)*/
-+    e_FM_EV_1G_MAC6,                /**< 1G MAC 6 (Magic packet detection)*/
-+    e_FM_EV_1G_MAC7,                /**< 1G MAC 7 (Magic packet detection)*/
-+    e_FM_EV_MACSEC_MAC0,            /**< MACSEC MAC 0 event */
-+    e_FM_EV_FMAN_CTRL_0,            /**< Fman controller event 0 */
-+    e_FM_EV_FMAN_CTRL_1,            /**< Fman controller event 1 */
-+    e_FM_EV_FMAN_CTRL_2,            /**< Fman controller event 2 */
-+    e_FM_EV_FMAN_CTRL_3,            /**< Fman controller event 3 */
-+    e_FM_EV_DUMMY_LAST
-+} e_FmInterModuleEvent;
-+
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(push,1)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+/**************************************************************************//**
-+ @Description   PCD KG scheme registers
-+*//***************************************************************************/
-+typedef _Packed struct t_FmPcdPlcrProfileRegs {
-+    volatile uint32_t fmpl_pemode;      /* 0x090 FMPL_PEMODE - FM Policer Profile Entry Mode*/
-+    volatile uint32_t fmpl_pegnia;      /* 0x094 FMPL_PEGNIA - FM Policer Profile Entry GREEN Next Invoked Action*/
-+    volatile uint32_t fmpl_peynia;      /* 0x098 FMPL_PEYNIA - FM Policer Profile Entry YELLOW Next Invoked Action*/
-+    volatile uint32_t fmpl_pernia;      /* 0x09C FMPL_PERNIA - FM Policer Profile Entry RED Next Invoked Action*/
-+    volatile uint32_t fmpl_pecir;       /* 0x0A0 FMPL_PECIR  - FM Policer Profile Entry Committed Information Rate*/
-+    volatile uint32_t fmpl_pecbs;       /* 0x0A4 FMPL_PECBS  - FM Policer Profile Entry Committed Burst Size*/
-+    volatile uint32_t fmpl_pepepir_eir; /* 0x0A8 FMPL_PEPIR_EIR - FM Policer Profile Entry Peak/Excess Information Rate*/
-+    volatile uint32_t fmpl_pepbs_ebs;   /* 0x0AC FMPL_PEPBS_EBS - FM Policer Profile Entry Peak/Excess Information Rate*/
-+    volatile uint32_t fmpl_pelts;       /* 0x0B0 FMPL_PELTS  - FM Policer Profile Entry Last TimeStamp*/
-+    volatile uint32_t fmpl_pects;       /* 0x0B4 FMPL_PECTS  - FM Policer Profile Entry Committed Token Status*/
-+    volatile uint32_t fmpl_pepts_ets;   /* 0x0B8 FMPL_PEPTS_ETS - FM Policer Profile Entry Peak/Excess Token Status*/
-+    volatile uint32_t fmpl_pegpc;       /* 0x0BC FMPL_PEGPC  - FM Policer Profile Entry GREEN Packet Counter*/
-+    volatile uint32_t fmpl_peypc;       /* 0x0C0 FMPL_PEYPC  - FM Policer Profile Entry YELLOW Packet Counter*/
-+    volatile uint32_t fmpl_perpc;       /* 0x0C4 FMPL_PERPC  - FM Policer Profile Entry RED Packet Counter */
-+    volatile uint32_t fmpl_perypc;      /* 0x0C8 FMPL_PERYPC - FM Policer Profile Entry Recolored YELLOW Packet Counter*/
-+    volatile uint32_t fmpl_perrpc;      /* 0x0CC FMPL_PERRPC - FM Policer Profile Entry Recolored RED Packet Counter*/
-+    volatile uint32_t fmpl_res1[12];    /* 0x0D0-0x0FF Reserved */
-+} _PackedType t_FmPcdPlcrProfileRegs;
-+
-+
-+typedef _Packed struct t_FmPcdCcCapwapReassmTimeoutParams {
-+    volatile uint32_t                       portIdAndCapwapReassmTbl;
-+    volatile uint32_t                       fqidForTimeOutFrames;
-+    volatile uint32_t                       timeoutRequestTime;
-+}_PackedType t_FmPcdCcCapwapReassmTimeoutParams;
-+
-+/**************************************************************************//**
-+ @Description   PCD CTRL Parameters Page
-+*//***************************************************************************/
-+typedef _Packed struct t_FmPcdCtrlParamsPage {
-+    volatile uint8_t  reserved0[16];
-+    volatile uint32_t iprIpv4Nia;
-+    volatile uint32_t iprIpv6Nia;
-+    volatile uint8_t  reserved1[24];
-+    volatile uint32_t ipfOptionsCounter;
-+    volatile uint8_t  reserved2[12];
-+    volatile uint32_t misc;
-+    volatile uint32_t errorsDiscardMask;
-+    volatile uint32_t discardMask;
-+    volatile uint8_t  reserved3[4];
-+    volatile uint32_t postBmiFetchNia;
-+    volatile uint8_t  reserved4[172];
-+} _PackedType t_FmPcdCtrlParamsPage;
-+
-+
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+
-+/*for UNDER_CONSTRUCTION_FM_RMU_USE_SEC its defined in fm_ext.h*/
-+typedef uint32_t t_FmFmanCtrl;
-+
-+#define FPM_PORT_FM_CTL1                0x00000001
-+#define FPM_PORT_FM_CTL2                0x00000002
-+
-+
-+
-+typedef struct t_FmPcdCcFragScratchPoolCmdParams {
-+    uint32_t    numOfBuffers;
-+    uint8_t     bufferPoolId;
-+} t_FmPcdCcFragScratchPoolCmdParams;
-+
-+typedef struct t_FmPcdCcReassmTimeoutParams {
-+    bool        activate;
-+    uint8_t     tsbs;
-+    uint32_t    iprcpt;
-+} t_FmPcdCcReassmTimeoutParams;
-+
-+typedef struct {
-+    uint8_t             baseEntry;
-+    uint16_t            numOfClsPlanEntries;
-+    uint32_t            vectors[FM_PCD_MAX_NUM_OF_CLS_PLANS];
-+} t_FmPcdKgInterModuleClsPlanSet;
-+
-+/**************************************************************************//**
-+ @Description   Structure for binding a port to keygen schemes.
-+*//***************************************************************************/
-+typedef struct t_FmPcdKgInterModuleBindPortToSchemes {
-+    uint8_t     hardwarePortId;
-+    uint8_t     netEnvId;
-+    bool        useClsPlan;                 /**< TRUE if this port uses the clsPlan mechanism */
-+    uint8_t     numOfSchemes;
-+    uint8_t     schemesIds[FM_PCD_KG_NUM_OF_SCHEMES];
-+} t_FmPcdKgInterModuleBindPortToSchemes;
-+
-+typedef struct {
-+    uint32_t nextCcNodeInfo;
-+    t_List   node;
-+} t_CcNodeInfo;
-+
-+typedef struct
-+{
-+    t_Handle    h_CcNode;
-+    uint16_t    index;
-+    t_List      node;
-+}t_CcNodeInformation;
-+#define CC_NODE_F_OBJECT(ptr)  LIST_OBJECT(ptr, t_CcNodeInformation, node)
-+
-+typedef enum e_ModifyState
-+{
-+    e_MODIFY_STATE_ADD = 0,
-+    e_MODIFY_STATE_REMOVE,
-+    e_MODIFY_STATE_CHANGE
-+} e_ModifyState;
-+
-+typedef struct
-+{
-+    t_Handle h_Manip;
-+    t_List   node;
-+}t_ManipInfo;
-+#define CC_NEXT_NODE_F_OBJECT(ptr)  LIST_OBJECT(ptr, t_CcNodeInfo, node)
-+
-+typedef struct {
-+    uint32_t            type;
-+    uint8_t             prOffset;
-+    uint16_t            dataOffset;
-+    uint8_t             internalBufferOffset;
-+    uint8_t             numOfTasks;
-+    uint8_t             numOfExtraTasks;
-+    uint8_t             hardwarePortId;
-+    t_FmRevisionInfo    revInfo;
-+    uint32_t            nia;
-+    uint32_t            discardMask;
-+} t_GetCcParams;
-+
-+typedef struct {
-+    uint32_t        type;
-+    int             psoSize;
-+    uint32_t        nia;
-+    t_FmFmanCtrl    orFmanCtrl;
-+    bool            overwrite;
-+    uint8_t         ofpDpde;
-+} t_SetCcParams;
-+
-+typedef struct {
-+    t_GetCcParams getCcParams;
-+    t_SetCcParams setCcParams;
-+} t_FmPortGetSetCcParams;
-+
-+typedef struct {
-+    uint32_t    type;
-+    bool        sleep;
-+} t_FmSetParams;
-+
-+typedef struct {
-+    uint32_t    type;
-+    uint32_t    fmqm_gs;
-+    uint32_t    fm_npi;
-+    uint32_t    fm_cld;
-+    uint32_t    fmfp_extc;
-+} t_FmGetParams;
-+
-+typedef struct {
-+    t_FmSetParams setParams;
-+    t_FmGetParams getParams;
-+} t_FmGetSetParams;
-+
-+t_Error FmGetSetParams(t_Handle h_Fm, t_FmGetSetParams *p_Params);
-+
-+static __inline__ bool TRY_LOCK(t_Handle h_Spinlock, volatile bool *p_Flag)
-+{
-+    uint32_t intFlags;
-+    if (h_Spinlock)
-+        intFlags = XX_LockIntrSpinlock(h_Spinlock);
-+    else
-+        intFlags = XX_DisableAllIntr();
-+
-+    if (*p_Flag)
-+    {
-+        if (h_Spinlock)
-+            XX_UnlockIntrSpinlock(h_Spinlock, intFlags);
-+        else
-+            XX_RestoreAllIntr(intFlags);
-+        return FALSE;
-+    }
-+    *p_Flag = TRUE;
-+
-+    if (h_Spinlock)
-+        XX_UnlockIntrSpinlock(h_Spinlock, intFlags);
-+    else
-+        XX_RestoreAllIntr(intFlags);
-+
-+    return TRUE;
-+}
-+
-+#define RELEASE_LOCK(_flag) _flag = FALSE;
-+
-+/**************************************************************************//**
-+ @Collection   Defines used for manipulation CC and BMI
-+ @{
-+*//***************************************************************************/
-+#define INTERNAL_CONTEXT_OFFSET                 0x80000000
-+#define OFFSET_OF_PR                            0x40000000
-+#define MANIP_EXTRA_SPACE                       0x20000000
-+#define NUM_OF_TASKS                            0x10000000
-+#define OFFSET_OF_DATA                          0x08000000
-+#define HW_PORT_ID                              0x04000000
-+#define FM_REV                                  0x02000000
-+#define GET_NIA_FPNE                            0x01000000
-+#define GET_NIA_PNDN                            0x00800000
-+#define NUM_OF_EXTRA_TASKS                      0x00400000
-+#define DISCARD_MASK                            0x00200000
-+
-+#define UPDATE_NIA_PNEN                         0x80000000
-+#define UPDATE_PSO                              0x40000000
-+#define UPDATE_NIA_PNDN                         0x20000000
-+#define UPDATE_FMFP_PRC_WITH_ONE_RISC_ONLY      0x10000000
-+#define UPDATE_OFP_DPTE                         0x08000000
-+#define UPDATE_NIA_FENE                         0x04000000
-+#define UPDATE_NIA_CMNE                         0x02000000
-+#define UPDATE_NIA_FPNE                         0x01000000
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Collection   Defines used for manipulation CC and CC
-+ @{
-+*//***************************************************************************/
-+#define UPDATE_NIA_ENQ_WITHOUT_DMA              0x80000000
-+#define UPDATE_CC_WITH_TREE                     0x40000000
-+#define UPDATE_CC_WITH_DELETE_TREE              0x20000000
-+#define UPDATE_KG_NIA_CC_WA                     0x10000000
-+#define UPDATE_KG_OPT_MODE                      0x08000000
-+#define UPDATE_KG_NIA                           0x04000000
-+#define UPDATE_CC_SHADOW_CLEAR                    0x02000000
-+/* @} */
-+
-+#define UPDATE_FPM_BRKC_SLP                     0x80000000
-+#define UPDATE_FPM_EXTC		                0x40000000
-+#define UPDATE_FPM_EXTC_CLEAR	                0x20000000
-+#define GET_FMQM_GS		                0x10000000
-+#define GET_FM_NPI		                0x08000000
-+#define GET_FMFP_EXTC		                0x04000000
-+#define CLEAR_IRAM_READY	                0x02000000
-+#define UPDATE_FM_CLD		                0x01000000
-+#define GET_FM_CLD		                0x00800000
-+#define FM_MAX_NUM_OF_PORTS     (FM_MAX_NUM_OF_OH_PORTS +     \
-+                                 FM_MAX_NUM_OF_1G_RX_PORTS +  \
-+                                 FM_MAX_NUM_OF_10G_RX_PORTS + \
-+                                 FM_MAX_NUM_OF_1G_TX_PORTS +  \
-+                                 FM_MAX_NUM_OF_10G_TX_PORTS)
-+
-+#define MODULE_NAME_SIZE        30
-+#define DUMMY_PORT_ID           0
-+
-+#define FM_LIODN_OFFSET_MASK    0x3FF
-+
-+/**************************************************************************//**
-+  @Description       NIA Description
-+*//***************************************************************************/
-+#define NIA_ENG_MASK                0x007C0000
-+#define NIA_AC_MASK                 0x0003ffff
-+
-+#define NIA_ORDER_RESTOR            0x00800000
-+#define NIA_ENG_FM_CTL              0x00000000
-+#define NIA_ENG_PRS                 0x00440000
-+#define NIA_ENG_KG                  0x00480000
-+#define NIA_ENG_PLCR                0x004C0000
-+#define NIA_ENG_BMI                 0x00500000
-+#define NIA_ENG_QMI_ENQ             0x00540000
-+#define NIA_ENG_QMI_DEQ             0x00580000
-+
-+#define NIA_FM_CTL_AC_CC                        0x00000006
-+#define NIA_FM_CTL_AC_HC                        0x0000000C
-+#define NIA_FM_CTL_AC_IND_MODE_TX               0x00000008
-+#define NIA_FM_CTL_AC_IND_MODE_RX               0x0000000A
-+#define NIA_FM_CTL_AC_POP_TO_N_STEP             0x0000000e
-+#define NIA_FM_CTL_AC_PRE_BMI_FETCH_HEADER      0x00000010
-+#define NIA_FM_CTL_AC_PRE_BMI_FETCH_FULL_FRAME  0x00000018
-+#define NIA_FM_CTL_AC_POST_BMI_FETCH            0x00000012
-+#define NIA_FM_CTL_AC_PRE_BMI_ENQ_FRAME         0x0000001A
-+#define NIA_FM_CTL_AC_PRE_BMI_DISCARD_FRAME     0x0000001E
-+#define NIA_FM_CTL_AC_POST_BMI_ENQ_ORR          0x00000014
-+#define NIA_FM_CTL_AC_POST_BMI_ENQ              0x00000022
-+#define NIA_FM_CTL_AC_PRE_CC                    0x00000020
-+#define NIA_FM_CTL_AC_POST_TX                   0x00000024
-+/* V3 only */
-+#define NIA_FM_CTL_AC_NO_IPACC_PRE_BMI_ENQ_FRAME        0x00000028
-+#define NIA_FM_CTL_AC_NO_IPACC_PRE_BMI_DISCARD_FRAME    0x0000002A
-+#define NIA_FM_CTL_AC_NO_IPACC_POP_TO_N_STEP            0x0000002C
-+
-+#define NIA_BMI_AC_ENQ_FRAME        0x00000002
-+#define NIA_BMI_AC_TX_RELEASE       0x000002C0
-+#define NIA_BMI_AC_RELEASE          0x000000C0
-+#define NIA_BMI_AC_DISCARD          0x000000C1
-+#define NIA_BMI_AC_TX               0x00000274
-+#define NIA_BMI_AC_FETCH            0x00000208
-+#define NIA_BMI_AC_MASK             0x000003FF
-+
-+#define NIA_KG_DIRECT               0x00000100
-+#define NIA_KG_CC_EN                0x00000200
-+#define NIA_PLCR_ABSOLUTE           0x00008000
-+
-+#define NIA_BMI_AC_ENQ_FRAME_WITHOUT_DMA    0x00000202
-+
-+#if defined(FM_OP_NO_VSP_NO_RELEASE_ERRATA_FMAN_A006675) || defined(FM_ERROR_VSP_NO_MATCH_SW006)
-+#define GET_NIA_BMI_AC_ENQ_FRAME(h_FmPcd)   \
-+    (uint32_t)((FmPcdIsAdvancedOffloadSupported(h_FmPcd)) ? \
-+                (NIA_ENG_FM_CTL | NIA_FM_CTL_AC_PRE_BMI_ENQ_FRAME) : \
-+                (NIA_ENG_FM_CTL | NIA_FM_CTL_AC_NO_IPACC_PRE_BMI_ENQ_FRAME))
-+#define GET_NIA_BMI_AC_DISCARD_FRAME(h_FmPcd)   \
-+    (uint32_t)((FmPcdIsAdvancedOffloadSupported(h_FmPcd)) ? \
-+                (NIA_ENG_FM_CTL | NIA_FM_CTL_AC_PRE_BMI_DISCARD_FRAME) : \
-+                (NIA_ENG_FM_CTL | NIA_FM_CTL_AC_NO_IPACC_PRE_BMI_DISCARD_FRAME))
-+#define GET_NO_PCD_NIA_BMI_AC_ENQ_FRAME()   \
-+        (NIA_ENG_FM_CTL | NIA_FM_CTL_AC_NO_IPACC_PRE_BMI_ENQ_FRAME)
-+#else
-+#define GET_NIA_BMI_AC_ENQ_FRAME(h_FmPcd)   \
-+    (uint32_t)((FmPcdIsAdvancedOffloadSupported(h_FmPcd)) ? \
-+                (NIA_ENG_FM_CTL | NIA_FM_CTL_AC_PRE_BMI_ENQ_FRAME) : \
-+                (NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME))
-+#define GET_NIA_BMI_AC_DISCARD_FRAME(h_FmPcd)   \
-+    (uint32_t)((FmPcdIsAdvancedOffloadSupported(h_FmPcd)) ? \
-+                (NIA_ENG_FM_CTL | NIA_FM_CTL_AC_PRE_BMI_DISCARD_FRAME) : \
-+                (NIA_ENG_BMI | NIA_BMI_AC_DISCARD))
-+#define GET_NO_PCD_NIA_BMI_AC_ENQ_FRAME()   \
-+            (NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME)
-+#endif /* defined(FM_OP_NO_VSP_NO_RELEASE_ERRATA_FMAN_A006675) || ... */
-+
-+/**************************************************************************//**
-+  @Description        CTRL Parameters Page defines
-+*//***************************************************************************/
-+#define FM_CTL_PARAMS_PAGE_OP_FIX_EN            0x80000000
-+#define FM_CTL_PARAMS_PAGE_OFFLOAD_SUPPORT_EN   0x40000000
-+#define FM_CTL_PARAMS_PAGE_ALWAYS_ON            0x00000100
-+
-+#define FM_CTL_PARAMS_PAGE_ERROR_VSP_MASK       0x0000003f
-+
-+/**************************************************************************//**
-+ @Description       Port Id defines
-+*//***************************************************************************/
-+#if (DPAA_VERSION == 10)
-+#define BASE_OH_PORTID              1
-+#else
-+#define BASE_OH_PORTID              2
-+#endif /* (DPAA_VERSION == 10) */
-+#define BASE_1G_RX_PORTID           8
-+#define BASE_10G_RX_PORTID          0x10
-+#define BASE_1G_TX_PORTID           0x28
-+#define BASE_10G_TX_PORTID          0x30
-+
-+#define FM_PCD_PORT_OH_BASE_INDX        0
-+#define FM_PCD_PORT_1G_RX_BASE_INDX     (FM_PCD_PORT_OH_BASE_INDX+FM_MAX_NUM_OF_OH_PORTS)
-+#define FM_PCD_PORT_10G_RX_BASE_INDX    (FM_PCD_PORT_1G_RX_BASE_INDX+FM_MAX_NUM_OF_1G_RX_PORTS)
-+#define FM_PCD_PORT_1G_TX_BASE_INDX     (FM_PCD_PORT_10G_RX_BASE_INDX+FM_MAX_NUM_OF_10G_RX_PORTS)
-+#define FM_PCD_PORT_10G_TX_BASE_INDX    (FM_PCD_PORT_1G_TX_BASE_INDX+FM_MAX_NUM_OF_1G_TX_PORTS)
-+
-+#if (FM_MAX_NUM_OF_OH_PORTS > 0)
-+#define CHECK_PORT_ID_OH_PORTS(_relativePortId)                     \
-+    if ((_relativePortId) >= FM_MAX_NUM_OF_OH_PORTS)                \
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal OH_PORT port id"))
-+#else
-+#define CHECK_PORT_ID_OH_PORTS(_relativePortId)                     \
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal OH_PORT port id"))
-+#endif
-+#if (FM_MAX_NUM_OF_1G_RX_PORTS > 0)
-+#define CHECK_PORT_ID_1G_RX_PORTS(_relativePortId)                  \
-+    if ((_relativePortId) >= FM_MAX_NUM_OF_1G_RX_PORTS)             \
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal 1G_RX_PORT port id"))
-+#else
-+#define CHECK_PORT_ID_1G_RX_PORTS(_relativePortId)                  \
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal 1G_RX_PORT port id"))
-+#endif
-+#if (FM_MAX_NUM_OF_10G_RX_PORTS > 0)
-+#define CHECK_PORT_ID_10G_RX_PORTS(_relativePortId)                 \
-+    if ((_relativePortId) >= FM_MAX_NUM_OF_10G_RX_PORTS)            \
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal 10G_RX_PORT port id"))
-+#else
-+#define CHECK_PORT_ID_10G_RX_PORTS(_relativePortId)                 \
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal 10G_RX_PORT port id"))
-+#endif
-+#if (FM_MAX_NUM_OF_1G_TX_PORTS > 0)
-+#define CHECK_PORT_ID_1G_TX_PORTS(_relativePortId)                  \
-+    if ((_relativePortId) >= FM_MAX_NUM_OF_1G_TX_PORTS)             \
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal 1G_TX_PORT port id"))
-+#else
-+#define CHECK_PORT_ID_1G_TX_PORTS(_relativePortId)                  \
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal 1G_TX_PORT port id"))
-+#endif
-+#if (FM_MAX_NUM_OF_10G_TX_PORTS > 0)
-+#define CHECK_PORT_ID_10G_TX_PORTS(_relativePortId)                 \
-+    if ((_relativePortId) >= FM_MAX_NUM_OF_10G_TX_PORTS)            \
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal 10G_TX_PORT port id"))
-+#else
-+#define CHECK_PORT_ID_10G_TX_PORTS(_relativePortId)                 \
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal 10G_TX_PORT port id"))
-+#endif
-+
-+uint8_t SwPortIdToHwPortId(e_FmPortType type, uint8_t relativePortId, uint8_t majorRev, uint8_t minorRev);
-+
-+#define HW_PORT_ID_TO_SW_PORT_ID(_relativePortId, hardwarePortId)                   \
-+{   if (((hardwarePortId) >= BASE_OH_PORTID) &&                                     \
-+        ((hardwarePortId) < BASE_OH_PORTID+FM_MAX_NUM_OF_OH_PORTS))                 \
-+        _relativePortId = (uint8_t)((hardwarePortId)-BASE_OH_PORTID);               \
-+    else if (((hardwarePortId) >= BASE_10G_TX_PORTID) &&                            \
-+             ((hardwarePortId) < BASE_10G_TX_PORTID+FM_MAX_NUM_OF_10G_TX_PORTS))    \
-+        _relativePortId = (uint8_t)((hardwarePortId)-BASE_10G_TX_PORTID);           \
-+    else if (((hardwarePortId) >= BASE_1G_TX_PORTID) &&                             \
-+             ((hardwarePortId) < BASE_1G_TX_PORTID+FM_MAX_NUM_OF_1G_TX_PORTS))      \
-+        _relativePortId = (uint8_t)((hardwarePortId)-BASE_1G_TX_PORTID);            \
-+    else if (((hardwarePortId) >= BASE_10G_RX_PORTID) &&                            \
-+             ((hardwarePortId) < BASE_10G_RX_PORTID+FM_MAX_NUM_OF_10G_RX_PORTS))    \
-+        _relativePortId = (uint8_t)((hardwarePortId)-BASE_10G_RX_PORTID);           \
-+    else if (((hardwarePortId) >= BASE_1G_RX_PORTID) &&                             \
-+             ((hardwarePortId) < BASE_1G_RX_PORTID+FM_MAX_NUM_OF_1G_RX_PORTS))      \
-+        _relativePortId = (uint8_t)((hardwarePortId)-BASE_1G_RX_PORTID);            \
-+    else {                                                                          \
-+        _relativePortId = (uint8_t)DUMMY_PORT_ID;                                   \
-+        ASSERT_COND(TRUE);                                                          \
-+    }                                                                               \
-+}
-+
-+#define HW_PORT_ID_TO_SW_PORT_INDX(swPortIndex, hardwarePortId)                                             \
-+do {                                                                                                        \
-+    if (((hardwarePortId) >= BASE_OH_PORTID) && ((hardwarePortId) < BASE_OH_PORTID+FM_MAX_NUM_OF_OH_PORTS)) \
-+        swPortIndex = (uint8_t)((hardwarePortId)-BASE_OH_PORTID+FM_PCD_PORT_OH_BASE_INDX);                  \
-+    else if (((hardwarePortId) >= BASE_1G_RX_PORTID) &&                                                     \
-+             ((hardwarePortId) < BASE_1G_RX_PORTID+FM_MAX_NUM_OF_1G_RX_PORTS))                              \
-+        swPortIndex = (uint8_t)((hardwarePortId)-BASE_1G_RX_PORTID+FM_PCD_PORT_1G_RX_BASE_INDX);            \
-+    else if (((hardwarePortId) >= BASE_10G_RX_PORTID) &&                                                    \
-+             ((hardwarePortId) < BASE_10G_RX_PORTID+FM_MAX_NUM_OF_10G_RX_PORTS))                            \
-+        swPortIndex = (uint8_t)((hardwarePortId)-BASE_10G_RX_PORTID+FM_PCD_PORT_10G_RX_BASE_INDX);          \
-+    else if (((hardwarePortId) >= BASE_1G_TX_PORTID) &&                                                     \
-+             ((hardwarePortId) < BASE_1G_TX_PORTID+FM_MAX_NUM_OF_1G_TX_PORTS))                              \
-+        swPortIndex = (uint8_t)((hardwarePortId)-BASE_1G_TX_PORTID+FM_PCD_PORT_1G_TX_BASE_INDX);            \
-+    else if (((hardwarePortId) >= BASE_10G_TX_PORTID) &&                                                    \
-+             ((hardwarePortId) < BASE_10G_TX_PORTID+FM_MAX_NUM_OF_10G_TX_PORTS))                            \
-+        swPortIndex = (uint8_t)((hardwarePortId)-BASE_10G_TX_PORTID+FM_PCD_PORT_10G_TX_BASE_INDX);          \
-+    else ASSERT_COND(FALSE);                                                                                \
-+} while (0)
-+
-+#define SW_PORT_INDX_TO_HW_PORT_ID(hardwarePortId, swPortIndex)                                                 \
-+do {                                                                                                            \
-+    if (((swPortIndex) >= FM_PCD_PORT_OH_BASE_INDX) && ((swPortIndex) < FM_PCD_PORT_1G_RX_BASE_INDX))           \
-+        hardwarePortId = (uint8_t)((swPortIndex)-FM_PCD_PORT_OH_BASE_INDX+BASE_OH_PORTID);                      \
-+    else if (((swPortIndex) >= FM_PCD_PORT_1G_RX_BASE_INDX) && ((swPortIndex) < FM_PCD_PORT_10G_RX_BASE_INDX))  \
-+        hardwarePortId = (uint8_t)((swPortIndex)-FM_PCD_PORT_1G_RX_BASE_INDX+BASE_1G_RX_PORTID);                \
-+    else if (((swPortIndex) >= FM_PCD_PORT_10G_RX_BASE_INDX) && ((swPortIndex) < FM_MAX_NUM_OF_PORTS))          \
-+        hardwarePortId = (uint8_t)((swPortIndex)-FM_PCD_PORT_10G_RX_BASE_INDX+BASE_10G_RX_PORTID);              \
-+    else if (((swPortIndex) >= FM_PCD_PORT_1G_TX_BASE_INDX) && ((swPortIndex) < FM_PCD_PORT_10G_TX_BASE_INDX))  \
-+        hardwarePortId = (uint8_t)((swPortIndex)-FM_PCD_PORT_1G_TX_BASE_INDX+BASE_1G_TX_PORTID);                \
-+    else if (((swPortIndex) >= FM_PCD_PORT_10G_TX_BASE_INDX) && ((swPortIndex) < FM_MAX_NUM_OF_PORTS))          \
-+        hardwarePortId = (uint8_t)((swPortIndex)-FM_PCD_PORT_10G_TX_BASE_INDX+BASE_10G_TX_PORTID);              \
-+    else ASSERT_COND(FALSE);                                                                                    \
-+} while (0)
-+
-+#define BMI_MAX_FIFO_SIZE                   (FM_MURAM_SIZE)
-+#define BMI_FIFO_UNITS                      0x100
-+
-+typedef struct {
-+    void        (*f_Isr) (t_Handle h_Arg);
-+    t_Handle    h_SrcHandle;
-+    uint8_t     guestId;
-+} t_FmIntrSrc;
-+
-+#define ILLEGAL_HDR_NUM                     0xFF
-+#define NO_HDR_NUM                          FM_PCD_PRS_NUM_OF_HDRS
-+
-+#define IS_PRIVATE_HEADER(hdr)              (((hdr) == HEADER_TYPE_USER_DEFINED_SHIM1) ||   \
-+                                             ((hdr) == HEADER_TYPE_USER_DEFINED_SHIM2))
-+#define IS_SPECIAL_HEADER(hdr)              ((hdr) == HEADER_TYPE_MACSEC)
-+
-+static __inline__ uint8_t GetPrsHdrNum(e_NetHeaderType hdr)
-+{
-+	 switch (hdr)
-+	 {   case (HEADER_TYPE_ETH):              return 0;
-+	     case (HEADER_TYPE_LLC_SNAP):         return 1;
-+	     case (HEADER_TYPE_VLAN):             return 2;
-+	     case (HEADER_TYPE_PPPoE):            return 3;
-+	     case (HEADER_TYPE_PPP):              return 3;
-+	     case (HEADER_TYPE_MPLS):             return 4;
-+	     case (HEADER_TYPE_IPv4):             return 5;
-+	     case (HEADER_TYPE_IPv6):             return 6;
-+	     case (HEADER_TYPE_GRE):              return 7;
-+	     case (HEADER_TYPE_MINENCAP):         return 8;
-+	     case (HEADER_TYPE_USER_DEFINED_L3):  return 9;
-+	     case (HEADER_TYPE_TCP):              return 10;
-+	     case (HEADER_TYPE_UDP):              return 11;
-+	     case (HEADER_TYPE_IPSEC_AH):
-+	     case (HEADER_TYPE_IPSEC_ESP):        return 12;
-+	     case (HEADER_TYPE_SCTP):             return 13;
-+	     case (HEADER_TYPE_DCCP):             return 14;
-+	     case (HEADER_TYPE_USER_DEFINED_L4):  return 15;
-+	     case (HEADER_TYPE_USER_DEFINED_SHIM1):
-+	     case (HEADER_TYPE_USER_DEFINED_SHIM2):
-+	     case (HEADER_TYPE_MACSEC):           return NO_HDR_NUM;
-+	     default:
-+	         return ILLEGAL_HDR_NUM;
-+	 }
-+}
-+
-+#define FM_PCD_MAX_NUM_OF_OPTIONS(clsPlanEntries)   ((clsPlanEntries==256)? 8:((clsPlanEntries==128)? 7: ((clsPlanEntries==64)? 6: ((clsPlanEntries==32)? 5:0))))
-+
-+
-+/**************************************************************************//**
-+ @Description   A structure for initializing a keygen classification plan group
-+*//***************************************************************************/
-+typedef struct t_FmPcdKgInterModuleClsPlanGrpParams {
-+    uint8_t         netEnvId;   /* IN */
-+    bool            grpExists;  /* OUT (unused in FmPcdKgBuildClsPlanGrp)*/
-+    uint8_t         clsPlanGrpId;  /* OUT */
-+    bool            emptyClsPlanGrp; /* OUT */
-+    uint8_t         numOfOptions;   /* OUT in FmPcdGetSetClsPlanGrpParams IN in FmPcdKgBuildClsPlanGrp*/
-+    protocolOpt_t   options[FM_PCD_MAX_NUM_OF_OPTIONS(FM_PCD_MAX_NUM_OF_CLS_PLANS)];
-+                                    /* OUT in FmPcdGetSetClsPlanGrpParams IN in FmPcdKgBuildClsPlanGrp*/
-+    uint32_t        optVectors[FM_PCD_MAX_NUM_OF_OPTIONS(FM_PCD_MAX_NUM_OF_CLS_PLANS)];
-+                               /* OUT in FmPcdGetSetClsPlanGrpParams IN in FmPcdKgBuildClsPlanGrp*/
-+} t_FmPcdKgInterModuleClsPlanGrpParams;
-+
-+typedef struct t_FmPcdLock {
-+    t_Handle        h_Spinlock;
-+    volatile bool   flag;
-+    t_List          node;
-+} t_FmPcdLock;
-+#define FM_PCD_LOCK_OBJ(ptr)  LIST_OBJECT(ptr, t_FmPcdLock, node)
-+
-+
-+typedef t_Error (t_FmPortGetSetCcParamsCallback) (t_Handle                  h_FmPort,
-+                                                  t_FmPortGetSetCcParams    *p_FmPortGetSetCcParams);
-+
-+
-+/***********************************************************************/
-+/*          Common API for FM-PCD module                               */
-+/***********************************************************************/
-+t_Handle    FmPcdGetHcHandle(t_Handle h_FmPcd);
-+uint32_t    FmPcdGetSwPrsOffset(t_Handle h_FmPcd, e_NetHeaderType hdr, uint8_t  indexPerHdr);
-+uint32_t    FmPcdGetLcv(t_Handle h_FmPcd, uint32_t netEnvId, uint8_t hdrNum);
-+uint32_t    FmPcdGetMacsecLcv(t_Handle h_FmPcd, uint32_t netEnvId);
-+void        FmPcdIncNetEnvOwners(t_Handle h_FmPcd, uint8_t netEnvId);
-+void        FmPcdDecNetEnvOwners(t_Handle h_FmPcd, uint8_t netEnvId);
-+uint8_t     FmPcdGetNetEnvId(t_Handle h_NetEnv);
-+void        FmPcdPortRegister(t_Handle h_FmPcd, t_Handle h_FmPort, uint8_t hardwarePortId);
-+uint32_t    FmPcdLock(t_Handle h_FmPcd);
-+void        FmPcdUnlock(t_Handle h_FmPcd, uint32_t  intFlags);
-+bool        FmPcdNetEnvIsHdrExist(t_Handle h_FmPcd, uint8_t netEnvId, e_NetHeaderType hdr);
-+t_Error     FmPcdFragHcScratchPoolInit(t_Handle h_FmPcd, uint8_t scratchBpid);
-+t_Error     FmPcdRegisterReassmPort(t_Handle h_FmPcd, t_Handle h_IpReasmCommonPramTbl);
-+t_Error     FmPcdUnregisterReassmPort(t_Handle h_FmPcd, t_Handle h_IpReasmCommonPramTbl);
-+bool        FmPcdIsAdvancedOffloadSupported(t_Handle h_FmPcd);
-+bool        FmPcdLockTryLockAll(t_Handle h_FmPcd);
-+void        FmPcdLockUnlockAll(t_Handle h_FmPcd);
-+t_Error     FmPcdHcSync(t_Handle h_FmPcd);
-+t_Handle    FmGetPcd(t_Handle h_Fm);
-+/***********************************************************************/
-+/*          Common API for FM-PCD KG module                            */
-+/***********************************************************************/
-+uint8_t     FmPcdKgGetClsPlanGrpBase(t_Handle h_FmPcd, uint8_t clsPlanGrp);
-+uint16_t    FmPcdKgGetClsPlanGrpSize(t_Handle h_FmPcd, uint8_t clsPlanGrp);
-+t_Error     FmPcdKgBuildClsPlanGrp(t_Handle h_FmPcd, t_FmPcdKgInterModuleClsPlanGrpParams *p_Grp, t_FmPcdKgInterModuleClsPlanSet *p_ClsPlanSet);
-+
-+uint8_t     FmPcdKgGetSchemeId(t_Handle h_Scheme);
-+#if (DPAA_VERSION >= 11)
-+bool        FmPcdKgGetVspe(t_Handle h_Scheme);
-+#endif /* (DPAA_VERSION >= 11) */
-+uint8_t     FmPcdKgGetRelativeSchemeId(t_Handle h_FmPcd, uint8_t schemeId);
-+void        FmPcdKgDestroyClsPlanGrp(t_Handle h_FmPcd, uint8_t grpId);
-+t_Error     FmPcdKgCheckInvalidateSchemeSw(t_Handle h_Scheme);
-+t_Error     FmPcdKgBuildBindPortToSchemes(t_Handle h_FmPcd , t_FmPcdKgInterModuleBindPortToSchemes *p_BindPortToSchemes, uint32_t *p_SpReg, bool add);
-+bool        FmPcdKgHwSchemeIsValid(uint32_t schemeModeReg);
-+uint32_t    FmPcdKgBuildWriteSchemeActionReg(uint8_t schemeId, bool updateCounter);
-+uint32_t    FmPcdKgBuildReadSchemeActionReg(uint8_t schemeId);
-+uint32_t    FmPcdKgBuildWriteClsPlanBlockActionReg(uint8_t grpId);
-+uint32_t    FmPcdKgBuildWritePortSchemeBindActionReg(uint8_t hardwarePortId);
-+uint32_t    FmPcdKgBuildReadPortSchemeBindActionReg(uint8_t hardwarePortId);
-+uint32_t    FmPcdKgBuildWritePortClsPlanBindActionReg(uint8_t hardwarePortId);
-+bool        FmPcdKgIsSchemeValidSw(t_Handle h_Scheme);
-+
-+t_Error     FmPcdKgBindPortToSchemes(t_Handle h_FmPcd , t_FmPcdKgInterModuleBindPortToSchemes  *p_SchemeBind);
-+t_Error     FmPcdKgUnbindPortToSchemes(t_Handle h_FmPcd , t_FmPcdKgInterModuleBindPortToSchemes *p_SchemeBind);
-+uint32_t    FmPcdKgGetRequiredAction(t_Handle h_FmPcd, uint8_t schemeId);
-+uint32_t    FmPcdKgGetRequiredActionFlag(t_Handle h_FmPcd, uint8_t schemeId);
-+e_FmPcdDoneAction FmPcdKgGetDoneAction(t_Handle h_FmPcd, uint8_t schemeId);
-+e_FmPcdEngine FmPcdKgGetNextEngine(t_Handle h_FmPcd, uint8_t schemeId);
-+void        FmPcdKgUpdateRequiredAction(t_Handle h_Scheme, uint32_t requiredAction);
-+bool        FmPcdKgIsDirectPlcr(t_Handle h_FmPcd, uint8_t schemeId);
-+bool        FmPcdKgIsDistrOnPlcrProfile(t_Handle h_FmPcd, uint8_t schemeId);
-+uint16_t    FmPcdKgGetRelativeProfileId(t_Handle h_FmPcd, uint8_t schemeId);
-+t_Handle    FmPcdKgGetSchemeHandle(t_Handle h_FmPcd, uint8_t relativeSchemeId);
-+bool        FmPcdKgIsSchemeHasOwners(t_Handle h_Scheme);
-+t_Error     FmPcdKgCcGetSetParams(t_Handle h_FmPcd, t_Handle  h_Scheme, uint32_t requiredAction, uint32_t value);
-+t_Error     FmPcdKgSetOrBindToClsPlanGrp(t_Handle h_FmPcd, uint8_t hardwarePortId, uint8_t netEnvId, protocolOpt_t *p_OptArray, uint8_t *p_ClsPlanGrpId, bool *p_IsEmptyClsPlanGrp);
-+t_Error     FmPcdKgDeleteOrUnbindPortToClsPlanGrp(t_Handle h_FmPcd, uint8_t hardwarePortId, uint8_t clsPlanGrpId);
-+
-+/***********************************************************************/
-+/*          Common API for FM-PCD parser module                        */
-+/***********************************************************************/
-+t_Error     FmPcdPrsIncludePortInStatistics(t_Handle p_FmPcd, uint8_t hardwarePortId,  bool include);
-+
-+/***********************************************************************/
-+/*          Common API for FM-PCD policer module                       */
-+/***********************************************************************/
-+t_Error     FmPcdPlcrAllocProfiles(t_Handle h_FmPcd, uint8_t hardwarePortId, uint16_t numOfProfiles);
-+t_Error     FmPcdPlcrFreeProfiles(t_Handle h_FmPcd, uint8_t hardwarePortId);
-+bool        FmPcdPlcrIsProfileValid(t_Handle h_FmPcd, uint16_t absoluteProfileId);
-+uint16_t    FmPcdPlcrGetPortProfilesBase(t_Handle h_FmPcd, uint8_t hardwarePortId);
-+uint16_t    FmPcdPlcrGetPortNumOfProfiles(t_Handle h_FmPcd, uint8_t hardwarePortId);
-+uint32_t    FmPcdPlcrBuildWritePlcrActionRegs(uint16_t absoluteProfileId);
-+uint32_t    FmPcdPlcrBuildCounterProfileReg(e_FmPcdPlcrProfileCounters counter);
-+uint32_t    FmPcdPlcrBuildWritePlcrActionReg(uint16_t absoluteProfileId);
-+uint32_t    FmPcdPlcrBuildReadPlcrActionReg(uint16_t absoluteProfileId);
-+uint16_t    FmPcdPlcrProfileGetAbsoluteId(t_Handle h_Profile);
-+t_Error     FmPcdPlcrGetAbsoluteIdByProfileParams(t_Handle                      h_FmPcd,
-+                                          e_FmPcdProfileTypeSelection   profileType,
-+                                          t_Handle                      h_FmPort,
-+                                          uint16_t                      relativeProfile,
-+                                          uint16_t                      *p_AbsoluteId);
-+void        FmPcdPlcrInvalidateProfileSw(t_Handle h_FmPcd, uint16_t absoluteProfileId);
-+void        FmPcdPlcrValidateProfileSw(t_Handle h_FmPcd, uint16_t absoluteProfileId);
-+bool        FmPcdPlcrHwProfileIsValid(uint32_t profileModeReg);
-+uint32_t    FmPcdPlcrGetRequiredAction(t_Handle h_FmPcd, uint16_t absoluteProfileId);
-+uint32_t    FmPcdPlcrGetRequiredActionFlag(t_Handle h_FmPcd, uint16_t absoluteProfileId);
-+uint32_t    FmPcdPlcrBuildNiaProfileReg(bool green, bool yellow, bool red);
-+void        FmPcdPlcrUpdateRequiredAction(t_Handle h_FmPcd, uint16_t absoluteProfileId, uint32_t requiredAction);
-+t_Error     FmPcdPlcrCcGetSetParams(t_Handle h_FmPcd, uint16_t profileIndx,uint32_t requiredAction);
-+
-+/***********************************************************************/
-+/*          Common API for FM-PCD CC module                            */
-+/***********************************************************************/
-+uint8_t     FmPcdCcGetParseCode(t_Handle h_CcNode);
-+uint8_t     FmPcdCcGetOffset(t_Handle h_CcNode);
-+t_Error     FmPcdCcRemoveKey(t_Handle h_FmPcd, t_Handle h_FmPcdCcNode, uint16_t keyIndex);
-+t_Error     FmPcdCcAddKey(t_Handle h_FmPcd, t_Handle h_CcNode, uint16_t keyIndex, uint8_t keySize, t_FmPcdCcKeyParams *p_FmPCdCcKeyParams);
-+t_Error     FmPcdCcModifyKey(t_Handle h_FmPcd, t_Handle h_CcNode, uint16_t keyIndex, uint8_t keySize, uint8_t *p_Key, uint8_t *p_Mask);
-+t_Error     FmPcdCcModifyKeyAndNextEngine(t_Handle h_FmPcd, t_Handle h_FmPcdCcNode, uint16_t keyIndex, uint8_t keySize, t_FmPcdCcKeyParams *p_FmPcdCcKeyParams);
-+t_Error     FmPcdCcModifyMissNextEngineParamNode(t_Handle h_FmPcd,t_Handle h_FmPcdCcNode, t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams);
-+t_Error     FmPcdCcModifyNextEngineParamTree(t_Handle h_FmPcd, t_Handle h_FmPcdCcTree, uint8_t grpId, uint8_t index, t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams);
-+uint32_t    FmPcdCcGetNodeAddrOffsetFromNodeInfo(t_Handle h_FmPcd, t_Handle h_Pointer);
-+t_Handle    FmPcdCcTreeGetSavedManipParams(t_Handle h_FmTree);
-+void        FmPcdCcTreeSetSavedManipParams(t_Handle h_FmTree, t_Handle h_SavedManipParams);
-+t_Error     FmPcdCcTreeAddIPR(t_Handle h_FmPcd, t_Handle h_FmTree, t_Handle h_NetEnv, t_Handle h_ReassemblyManip, bool schemes);
-+t_Error     FmPcdCcTreeAddCPR(t_Handle h_FmPcd, t_Handle h_FmTree, t_Handle h_NetEnv, t_Handle h_ReassemblyManip, bool schemes);
-+t_Error     FmPcdCcBindTree(t_Handle h_FmPcd, t_Handle h_PcdParams, t_Handle h_CcTree,  uint32_t  *p_Offset,t_Handle h_FmPort);
-+t_Error     FmPcdCcUnbindTree(t_Handle h_FmPcd, t_Handle h_CcTree);
-+
-+/***********************************************************************/
-+/*          Common API for FM-PCD Manip module                            */
-+/***********************************************************************/
-+t_Error     FmPcdManipUpdate(t_Handle h_FmPcd, t_Handle h_PcdParams, t_Handle h_FmPort, t_Handle h_Manip, t_Handle h_Ad, bool validate, int level, t_Handle h_FmTree, bool modify);
-+
-+/***********************************************************************/
-+/*          Common API for FM-Port module                            */
-+/***********************************************************************/
-+#if (DPAA_VERSION >= 11)
-+typedef enum e_FmPortGprFuncType
-+{
-+    e_FM_PORT_GPR_EMPTY = 0,
-+    e_FM_PORT_GPR_MURAM_PAGE
-+} e_FmPortGprFuncType;
-+
-+t_Error     FmPortSetGprFunc(t_Handle h_FmPort, e_FmPortGprFuncType gprFunc, void **p_Value);
-+#endif /* DPAA_VERSION >= 11) */
-+t_Error     FmGetSetParams(t_Handle h_Fm, t_FmGetSetParams *p_FmGetSetParams);
-+t_Error     FmPortGetSetCcParams(t_Handle h_FmPort, t_FmPortGetSetCcParams *p_FmPortGetSetCcParams);
-+uint8_t     FmPortGetNetEnvId(t_Handle h_FmPort);
-+uint8_t     FmPortGetHardwarePortId(t_Handle h_FmPort);
-+uint32_t    FmPortGetPcdEngines(t_Handle h_FmPort);
-+void        FmPortPcdKgSwUnbindClsPlanGrp (t_Handle h_FmPort);
-+
-+
-+#if (DPAA_VERSION >= 11)
-+t_Error     FmPcdFrmReplicUpdate(t_Handle h_FmPcd, t_Handle h_FmPort, t_Handle h_FrmReplic);
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/**************************************************************************//**
-+ @Function      FmRegisterIntr
-+
-+ @Description   Used to register an inter-module event handler to be processed by FM
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     mod             The module that causes the event
-+ @Param[in]     modId           Module id - if more than 1 instansiation of this
-+                                mode exists,0 otherwise.
-+ @Param[in]     intrType        Interrupt type (error/normal) selection.
-+ @Param[in]     f_Isr           The interrupt service routine.
-+ @Param[in]     h_Arg           Argument to be passed to f_Isr.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void FmRegisterIntr(t_Handle               h_Fm,
-+                    e_FmEventModules       mod,
-+                    uint8_t                modId,
-+                    e_FmIntrType           intrType,
-+                    void                   (*f_Isr) (t_Handle h_Arg),
-+                    t_Handle               h_Arg);
-+
-+/**************************************************************************//**
-+ @Function      FmUnregisterIntr
-+
-+ @Description   Used to un-register an inter-module event handler that was processed by FM
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     mod             The module that causes the event
-+ @Param[in]     modId           Module id - if more than 1 instansiation of this
-+                                mode exists,0 otherwise.
-+ @Param[in]     intrType        Interrupt type (error/normal) selection.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void FmUnregisterIntr(t_Handle          h_Fm,
-+                      e_FmEventModules  mod,
-+                      uint8_t           modId,
-+                      e_FmIntrType      intrType);
-+
-+/**************************************************************************//**
-+ @Function      FmRegisterFmCtlIntr
-+
-+ @Description   Used to register to one of the fmCtl events in the FM module
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     eventRegId      FmCtl event id (0-7).
-+ @Param[in]     f_Isr           The interrupt service routine.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+void  FmRegisterFmCtlIntr(t_Handle h_Fm, uint8_t eventRegId, void (*f_Isr) (t_Handle h_Fm, uint32_t event));
-+
-+
-+/**************************************************************************//**
-+ @Description   enum for defining MAC types
-+*//***************************************************************************/
-+typedef enum e_FmMacType {
-+    e_FM_MAC_10G = 0,               /**< 10G MAC */
-+    e_FM_MAC_1G                     /**< 1G MAC */
-+} e_FmMacType;
-+
-+/**************************************************************************//**
-+ @Description   Structure for port-FM communication during FM_PORT_Init.
-+                Fields commented 'IN' are passed by the port module to be used
-+                by the FM module.
-+                Fields commented 'OUT' will be filled by FM before returning to port.
-+                Some fields are optional (depending on configuration) and
-+                will be analized by the port and FM modules accordingly.
-+*//***************************************************************************/
-+typedef struct t_FmInterModulePortInitParams {
-+    uint8_t             hardwarePortId;     /**< IN. port Id */
-+    e_FmPortType        portType;           /**< IN. Port type */
-+    bool                independentMode;    /**< IN. TRUE if FM Port operates in independent mode */
-+    uint16_t            liodnOffset;        /**< IN. Port's requested resource */
-+    uint8_t             numOfTasks;         /**< IN. Port's requested resource */
-+    uint8_t             numOfExtraTasks;    /**< IN. Port's requested resource */
-+    uint8_t             numOfOpenDmas;      /**< IN. Port's requested resource */
-+    uint8_t             numOfExtraOpenDmas; /**< IN. Port's requested resource */
-+    uint32_t            sizeOfFifo;         /**< IN. Port's requested resource */
-+    uint32_t            extraSizeOfFifo;    /**< IN. Port's requested resource */
-+    uint8_t             deqPipelineDepth;   /**< IN. Port's requested resource */
-+    uint16_t            maxFrameLength;     /**< IN. Port's max frame length. */
-+    uint16_t            liodnBase;          /**< IN. Irrelevant for P4080 rev 1.
-+                                                 LIODN base for this port, to be
-+                                                 used together with LIODN offset. */
-+    t_FmPhysAddr        fmMuramPhysBaseAddr;/**< OUT. FM-MURAM physical address*/
-+} t_FmInterModulePortInitParams;
-+
-+/**************************************************************************//**
-+ @Description   Structure for port-FM communication during FM_PORT_Free.
-+*//***************************************************************************/
-+typedef struct t_FmInterModulePortFreeParams {
-+    uint8_t             hardwarePortId;     /**< IN. port Id */
-+    e_FmPortType        portType;           /**< IN. Port type */
-+    uint8_t             deqPipelineDepth;   /**< IN. Port's requested resource */
-+} t_FmInterModulePortFreeParams;
-+
-+/**************************************************************************//**
-+ @Function      FmGetPcdPrsBaseAddr
-+
-+ @Description   Get the base address of the Parser from the FM module
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+
-+ @Return        Base address.
-+*//***************************************************************************/
-+uintptr_t FmGetPcdPrsBaseAddr(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FmGetPcdKgBaseAddr
-+
-+ @Description   Get the base address of the Keygen from the FM module
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+
-+ @Return        Base address.
-+*//***************************************************************************/
-+uintptr_t FmGetPcdKgBaseAddr(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FmGetPcdPlcrBaseAddr
-+
-+ @Description   Get the base address of the Policer from the FM module
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+
-+ @Return        Base address.
-+*//***************************************************************************/
-+uintptr_t FmGetPcdPlcrBaseAddr(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FmGetMuramHandle
-+
-+ @Description   Get the handle of the MURAM from the FM module
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+
-+ @Return        MURAM module handle.
-+*//***************************************************************************/
-+t_Handle FmGetMuramHandle(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FmGetPhysicalMuramBase
-+
-+ @Description   Get the physical base address of the MURAM from the FM module
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     fmPhysAddr      Physical MURAM base
-+
-+ @Return        Physical base address.
-+*//***************************************************************************/
-+void FmGetPhysicalMuramBase(t_Handle h_Fm, t_FmPhysAddr *fmPhysAddr);
-+
-+/**************************************************************************//**
-+ @Function      FmGetTimeStampScale
-+
-+ @Description   Used internally by other modules in order to get the timeStamp
-+                period as requested by the application.
-+
-+                This function returns bit number that is incremented every 1 usec.
-+                To calculate timestamp period in nsec, use
-+                1000 / (1 << FmGetTimeStampScale()).
-+
-+ @Param[in]     h_Fm                    A handle to an FM Module.
-+
-+ @Return        Bit that counts 1 usec.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+uint32_t FmGetTimeStampScale(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FmResumeStalledPort
-+
-+ @Description   Used internally by FM port to release a stalled port.
-+
-+ @Param[in]     h_Fm                            A handle to an FM Module.
-+ @Param[in]     hardwarePortId                    HW port id.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+t_Error FmResumeStalledPort(t_Handle h_Fm, uint8_t hardwarePortId);
-+
-+/**************************************************************************//**
-+ @Function      FmIsPortStalled
-+
-+ @Description   Used internally by FM port to read the port's status.
-+
-+ @Param[in]     h_Fm                            A handle to an FM Module.
-+ @Param[in]     hardwarePortId                  HW port id.
-+ @Param[in]     p_IsStalled                     A pointer to the boolean port stalled state
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+t_Error FmIsPortStalled(t_Handle h_Fm, uint8_t hardwarePortId, bool *p_IsStalled);
-+
-+/**************************************************************************//**
-+ @Function      FmResetMac
-+
-+ @Description   Used by MAC driver to reset the MAC registers
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     type            MAC type.
-+ @Param[in]     macId           MAC id - according to type.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+t_Error FmResetMac(t_Handle h_Fm, e_FmMacType type, uint8_t macId);
-+
-+/**************************************************************************//**
-+ @Function      FmGetClockFreq
-+
-+ @Description   Used by MAC driver to get the FM clock frequency
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+
-+ @Return        clock-freq on success; 0 otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+uint16_t FmGetClockFreq(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FmGetMacClockFreq
-+
-+ @Description   Used by MAC driver to get the MAC clock frequency
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+
-+ @Return        clock-freq on success; 0 otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+uint16_t FmGetMacClockFreq(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FmGetId
-+
-+ @Description   Used by PCD driver to read rhe FM id
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+uint8_t FmGetId(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FmReset
-+
-+ @Description   Used to reset the FM
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FmReset(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FmGetSetPortParams
-+
-+ @Description   Used by FM-PORT driver to pass and receive parameters between
-+                PORT and FM modules.
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in,out] p_PortParams    A structure of FM Port parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+t_Error FmGetSetPortParams(t_Handle h_Fm,t_FmInterModulePortInitParams *p_PortParams);
-+
-+/**************************************************************************//**
-+ @Function      FmFreePortParams
-+
-+ @Description   Used by FM-PORT driver to free port's resources within the FM.
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in,out] p_PortParams    A structure of FM Port parameters.
-+
-+ @Return        None.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+void FmFreePortParams(t_Handle h_Fm,t_FmInterModulePortFreeParams *p_PortParams);
-+
-+/**************************************************************************//**
-+ @Function      FmSetNumOfRiscsPerPort
-+
-+ @Description   Used by FM-PORT driver to pass parameter between
-+                PORT and FM modules for working with number of RISC..
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     hardwarePortId    hardware port Id.
-+ @Param[in]     numOfFmanCtrls    number of Fman Controllers.
-+ @Param[in]     orFmanCtrl        Fman Controller for order restoration.
-+
-+ @Return        None.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+t_Error FmSetNumOfRiscsPerPort(t_Handle h_Fm, uint8_t hardwarePortId, uint8_t numOfFmanCtrls, t_FmFmanCtrl orFmanCtrl);
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+/**************************************************************************//*
-+ @Function      FmDumpPortRegs
-+
-+ @Description   Dumps FM port registers which are part of FM common registers
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     hardwarePortId    HW port id.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only FM_Init().
-+*//***************************************************************************/
-+t_Error FmDumpPortRegs(t_Handle h_Fm,uint8_t hardwarePortId);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+void        FmRegisterPcd(t_Handle h_Fm, t_Handle h_FmPcd);
-+void        FmUnregisterPcd(t_Handle h_Fm);
-+t_Handle    FmGetPcdHandle(t_Handle h_Fm);
-+t_Error     FmEnableRamsEcc(t_Handle h_Fm);
-+t_Error     FmDisableRamsEcc(t_Handle h_Fm);
-+void        FmGetRevision(t_Handle h_Fm, t_FmRevisionInfo *p_FmRevisionInfo);
-+t_Error     FmAllocFmanCtrlEventReg(t_Handle h_Fm, uint8_t *p_EventId);
-+void        FmFreeFmanCtrlEventReg(t_Handle h_Fm, uint8_t eventId);
-+void        FmSetFmanCtrlIntr(t_Handle h_Fm, uint8_t   eventRegId, uint32_t enableEvents);
-+uint32_t    FmGetFmanCtrlIntr(t_Handle h_Fm, uint8_t   eventRegId);
-+void        FmRegisterFmanCtrlIntr(t_Handle h_Fm, uint8_t eventRegId, void (*f_Isr) (t_Handle h_Fm, uint32_t event), t_Handle    h_Arg);
-+void        FmUnregisterFmanCtrlIntr(t_Handle h_Fm, uint8_t eventRegId);
-+t_Error     FmSetMacMaxFrame(t_Handle h_Fm, e_FmMacType type, uint8_t macId, uint16_t mtu);
-+bool        FmIsMaster(t_Handle h_Fm);
-+uint8_t     FmGetGuestId(t_Handle h_Fm);
-+uint16_t    FmGetTnumAgingPeriod(t_Handle h_Fm);
-+t_Error     FmSetPortPreFetchConfiguration(t_Handle h_Fm, uint8_t portNum, bool preFetchConfigured);
-+t_Error     FmGetPortPreFetchConfiguration(t_Handle h_Fm, uint8_t portNum, bool *p_PortConfigured, bool *p_PreFetchConfigured);
-+
-+
-+#ifdef FM_TX_ECC_FRMS_ERRATA_10GMAC_A004
-+t_Error     Fm10GTxEccWorkaround(t_Handle h_Fm, uint8_t macId);
-+#endif /* FM_TX_ECC_FRMS_ERRATA_10GMAC_A004 */
-+
-+void        FmMuramClear(t_Handle h_FmMuram);
-+t_Error     FmSetNumOfOpenDmas(t_Handle h_Fm,
-+                               uint8_t  hardwarePortId,
-+                               uint8_t  *p_NumOfOpenDmas,
-+                               uint8_t  *p_NumOfExtraOpenDmas,
-+                               bool     initialConfig);
-+t_Error     FmSetNumOfTasks(t_Handle    h_Fm,
-+                            uint8_t     hardwarePortId,
-+                            uint8_t     *p_NumOfTasks,
-+                            uint8_t     *p_NumOfExtraTasks,
-+                            bool        initialConfig);
-+t_Error     FmSetSizeOfFifo(t_Handle    h_Fm,
-+                            uint8_t     hardwarePortId,
-+                            uint32_t    *p_SizeOfFifo,
-+                            uint32_t    *p_ExtraSizeOfFifo,
-+                            bool        initialConfig);
-+
-+t_Error     FmSetCongestionGroupPFCpriority(t_Handle    h_Fm,
-+                                            uint32_t    congestionGroupId,
-+                                            uint8_t     priorityBitMap);
-+
-+#if (DPAA_VERSION >= 11)
-+t_Error     FmVSPAllocForPort(t_Handle         h_Fm,
-+                              e_FmPortType     portType,
-+                              uint8_t          portId,
-+                              uint8_t          numOfStorageProfiles);
-+
-+t_Error     FmVSPFreeForPort(t_Handle        h_Fm,
-+                             e_FmPortType    portType,
-+                             uint8_t         portId);
-+
-+t_Error     FmVSPGetAbsoluteProfileId(t_Handle      h_Fm,
-+                                      e_FmPortType  portType,
-+                                      uint8_t       portId,
-+                                      uint16_t      relativeProfile,
-+                                      uint16_t      *p_AbsoluteId);
-+t_Error FmVSPCheckRelativeProfile(t_Handle        h_Fm,
-+                                  e_FmPortType    portType,
-+                                  uint8_t         portId,
-+                                  uint16_t        relativeProfile);
-+
-+uintptr_t   FmGetVSPBaseAddr(t_Handle h_Fm);
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+
-+#endif /* __FM_COMMON_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/inc/fm_hc.h
-@@ -0,0 +1,93 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#ifndef __FM_HC_H
-+#define __FM_HC_H
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "fsl_fman_kg.h"
-+
-+#define __ERR_MODULE__  MODULE_FM_PCD
-+
-+
-+typedef struct t_FmHcParams {
-+    t_Handle        h_Fm;
-+    t_Handle        h_FmPcd;
-+    t_FmPcdHcParams params;
-+} t_FmHcParams;
-+
-+
-+t_Handle    FmHcConfigAndInit(t_FmHcParams *p_FmHcParams);
-+void        FmHcFree(t_Handle h_FmHc);
-+t_Error     FmHcSetFramesDataMemory(t_Handle h_FmHc,
-+                                    uint8_t  memId);
-+t_Error     FmHcDumpRegs(t_Handle h_FmHc);
-+
-+void        FmHcTxConf(t_Handle h_FmHc, t_DpaaFD *p_Fd);
-+
-+t_Error     FmHcPcdKgSetScheme(t_Handle                   h_FmHc,
-+                               t_Handle                   h_Scheme,
-+                               struct fman_kg_scheme_regs *p_SchemeRegs,
-+                               bool                       updateCounter);
-+t_Error     FmHcPcdKgDeleteScheme(t_Handle h_FmHc, t_Handle h_Scheme);
-+t_Error     FmHcPcdCcCapwapTimeoutReassm(t_Handle h_FmHc, t_FmPcdCcCapwapReassmTimeoutParams *p_CcCapwapReassmTimeoutParams );
-+t_Error     FmHcPcdCcIpFragScratchPollCmd(t_Handle h_FmHc, bool fill, t_FmPcdCcFragScratchPoolCmdParams *p_FmPcdCcFragScratchPoolCmdParams);
-+t_Error     FmHcPcdCcTimeoutReassm(t_Handle h_FmHc, t_FmPcdCcReassmTimeoutParams *p_CcReassmTimeoutParams, uint8_t *p_Result);
-+t_Error     FmHcPcdKgSetClsPlan(t_Handle h_FmHc, t_FmPcdKgInterModuleClsPlanSet *p_Set);
-+t_Error     FmHcPcdKgDeleteClsPlan(t_Handle h_FmHc, uint8_t clsPlanGrpId);
-+
-+t_Error     FmHcPcdKgSetSchemeCounter(t_Handle h_FmHc, t_Handle h_Scheme, uint32_t value);
-+uint32_t    FmHcPcdKgGetSchemeCounter(t_Handle h_FmHc, t_Handle h_Scheme);
-+
-+t_Error     FmHcPcdCcDoDynamicChange(t_Handle h_FmHc, uint32_t oldAdAddrOffset, uint32_t newAdAddrOffset);
-+
-+t_Error     FmHcPcdPlcrSetProfile(t_Handle h_FmHc, t_Handle h_Profile, t_FmPcdPlcrProfileRegs *p_PlcrRegs);
-+t_Error     FmHcPcdPlcrDeleteProfile(t_Handle h_FmHc, t_Handle h_Profile);
-+
-+t_Error     FmHcPcdPlcrSetProfileCounter(t_Handle h_FmHc, t_Handle h_Profile, e_FmPcdPlcrProfileCounters counter, uint32_t value);
-+uint32_t    FmHcPcdPlcrGetProfileCounter(t_Handle h_FmHc, t_Handle h_Profile, e_FmPcdPlcrProfileCounters counter);
-+
-+t_Error     FmHcKgWriteSp(t_Handle h_FmHc, uint8_t hardwarePortId, uint32_t spReg, bool add);
-+t_Error     FmHcKgWriteCpp(t_Handle h_FmHc, uint8_t hardwarePortId, uint32_t cppReg);
-+
-+t_Error     FmHcPcdKgCcGetSetParams(t_Handle h_FmHc, t_Handle  h_Scheme, uint32_t requiredAction, uint32_t value);
-+t_Error     FmHcPcdPlcrCcGetSetParams(t_Handle h_FmHc,uint16_t absoluteProfileId, uint32_t requiredAction);
-+
-+t_Error     FmHcPcdSync(t_Handle h_FmHc);
-+t_Handle    FmHcGetPort(t_Handle h_FmHc);
-+
-+
-+
-+
-+#endif /* __FM_HC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/inc/fm_sp_common.h
-@@ -0,0 +1,117 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_sp_common.h
-+
-+ @Description   FM SP  ...
-+*//***************************************************************************/
-+#ifndef __FM_SP_COMMON_H
-+#define __FM_SP_COMMON_H
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "list_ext.h"
-+
-+#include "fm_ext.h"
-+#include "fm_pcd_ext.h"
-+#include "fsl_fman.h"
-+
-+/**************************************************************************//**
-+ @Description       defaults
-+*//***************************************************************************/
-+#define DEFAULT_FM_SP_bufferPrefixContent_privDataSize      0
-+#define DEFAULT_FM_SP_bufferPrefixContent_passPrsResult     FALSE
-+#define DEFAULT_FM_SP_bufferPrefixContent_passTimeStamp     FALSE
-+#define DEFAULT_FM_SP_bufferPrefixContent_allOtherPCDInfo   FALSE
-+#define DEFAULT_FM_SP_bufferPrefixContent_dataAlign         64
-+
-+/**************************************************************************//**
-+ @Description   structure for defining internal context copying
-+*//***************************************************************************/
-+typedef struct
-+{
-+    uint16_t    extBufOffset;       /**< Offset in External buffer to which internal
-+                                         context is copied to (Rx) or taken from (Tx, Op). */
-+    uint8_t     intContextOffset;   /**< Offset within internal context to copy from
-+                                         (Rx) or to copy to (Tx, Op). */
-+    uint16_t    size;               /**< Internal offset size to be copied */
-+} t_FmSpIntContextDataCopy;
-+
-+/**************************************************************************//**
-+ @Description   struct for defining external buffer margins
-+*//***************************************************************************/
-+typedef struct {
-+    uint16_t    startMargins;           /**< Number of bytes to be left at the beginning
-+                                             of the external buffer (must be divisible by 16) */
-+    uint16_t    endMargins;             /**< number of bytes to be left at the end
-+                                             of the external buffer(must be divisible by 16) */
-+} t_FmSpBufMargins;
-+
-+typedef struct {
-+    uint32_t      dataOffset;
-+    uint32_t      prsResultOffset;
-+    uint32_t      timeStampOffset;
-+    uint32_t      hashResultOffset;
-+    uint32_t      pcdInfoOffset;
-+    uint32_t      manipOffset;
-+} t_FmSpBufferOffsets;
-+
-+
-+t_Error        FmSpBuildBufferStructure(t_FmSpIntContextDataCopy      *p_FmPortIntContextDataCopy,
-+                                        t_FmBufferPrefixContent       *p_BufferPrefixContent,
-+                                        t_FmSpBufMargins              *p_FmPortBufMargins,
-+                                        t_FmSpBufferOffsets           *p_FmPortBufferOffsets,
-+                                        uint8_t                       *internalBufferOffset);
-+
-+t_Error     FmSpCheckIntContextParams(t_FmSpIntContextDataCopy *p_FmSpIntContextDataCopy);
-+t_Error     FmSpCheckBufPoolsParams(t_FmExtPools *p_FmExtPools,
-+                                    t_FmBackupBmPools *p_FmBackupBmPools,
-+                                    t_FmBufPoolDepletion *p_FmBufPoolDepletion);
-+t_Error     FmSpCheckBufMargins(t_FmSpBufMargins *p_FmSpBufMargins);
-+void        FmSpSetBufPoolsInAscOrderOfBufSizes(t_FmExtPools *p_FmExtPools, uint8_t *orderedArray, uint16_t *sizesArray);
-+
-+t_Error     FmPcdSpAllocProfiles(t_Handle h_FmPcd,
-+                                 uint8_t  hardwarePortId,
-+                                 uint16_t numOfStorageProfiles,
-+                                 uint16_t *base,
-+                                 uint8_t  *log2Num);
-+t_Error     FmPcdSpGetAbsoluteProfileId(t_Handle                        h_FmPcd,
-+                                        t_Handle                        h_FmPort,
-+                                        uint16_t                        relativeProfile,
-+                                        uint16_t                        *p_AbsoluteId);
-+void SpInvalidateProfileSw(t_Handle h_FmPcd, uint16_t absoluteProfileId);
-+void SpValidateProfileSw(t_Handle h_FmPcd, uint16_t absoluteProfileId);
-+
-+
-+#endif /* __FM_SP_COMMON_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/etc/Makefile
-@@ -0,0 +1,12 @@
-+#
-+# Makefile for the Freescale Ethernet controllers
-+#
-+ccflags-y           += -DVERSION=\"\"
-+#
-+#Include netcomm SW specific definitions
-+
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+
-+obj-y		+= fsl-ncsw-etc.o
-+
-+fsl-ncsw-etc-objs	:= mm.o memcpy.o sprint.o list.o error.o
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/etc/error.c
-@@ -0,0 +1,95 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/*
-+
-+ @File          error.c
-+
-+ @Description   General errors and events reporting utilities.
-+*//***************************************************************************/
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+#include "error_ext.h"
-+
-+
-+const char *dbgLevelStrings[] =
-+{
-+     "CRITICAL"
-+    ,"MAJOR"
-+    ,"MINOR"
-+    ,"WARNING"
-+    ,"INFO"
-+    ,"TRACE"
-+};
-+
-+
-+char * ErrTypeStrings (e_ErrorType err)
-+{
-+    switch (err)
-+    {
-+        case (E_OK):                    return "OK";
-+        case (E_WRITE_FAILED):          return "Write Access Failed";
-+        case (E_NO_DEVICE):             return "No Device";
-+        case (E_NOT_AVAILABLE):         return "Resource Is Unavailable";
-+        case (E_NO_MEMORY):             return "Memory Allocation Failed";
-+        case (E_INVALID_ADDRESS):       return "Invalid Address";
-+        case (E_BUSY):                  return "Resource Is Busy";
-+        case (E_ALREADY_EXISTS):        return "Resource Already Exists";
-+        case (E_INVALID_OPERATION):     return "Invalid Operation";
-+        case (E_INVALID_VALUE):         return "Invalid Value";
-+        case (E_NOT_IN_RANGE):          return "Value Out Of Range";
-+        case (E_NOT_SUPPORTED):         return "Unsupported Operation";
-+        case (E_INVALID_STATE):         return "Invalid State";
-+        case (E_INVALID_HANDLE):        return "Invalid Handle";
-+        case (E_INVALID_ID):            return "Invalid ID";
-+        case (E_NULL_POINTER):          return "Unexpected NULL Pointer";
-+        case (E_INVALID_SELECTION):     return "Invalid Selection";
-+        case (E_INVALID_COMM_MODE):     return "Invalid Communication Mode";
-+        case (E_INVALID_MEMORY_TYPE):   return "Invalid Memory Type";
-+        case (E_INVALID_CLOCK):         return "Invalid Clock";
-+        case (E_CONFLICT):              return "Conflict In Settings";
-+        case (E_NOT_ALIGNED):           return "Incorrect Alignment";
-+        case (E_NOT_FOUND):             return "Resource Not Found";
-+        case (E_FULL):                  return "Resource Is Full";
-+        case (E_EMPTY):                 return "Resource Is Empty";
-+        case (E_ALREADY_FREE):          return "Resource Already Free";
-+        case (E_READ_FAILED):           return "Read Access Failed";
-+        case (E_INVALID_FRAME):         return "Invalid Frame";
-+        case (E_SEND_FAILED):           return "Send Operation Failed";
-+        case (E_RECEIVE_FAILED):        return "Receive Operation Failed";
-+        case (E_TIMEOUT):               return "Operation Timed Out";
-+        default:
-+            break;
-+    }
-+    return NULL;
-+}
-+#endif /* (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)) */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/etc/list.c
-@@ -0,0 +1,71 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+
-+ @File          list.c
-+
-+ @Description   Implementation of list.
-+*//***************************************************************************/
-+#include "std_ext.h"
-+#include "list_ext.h"
-+
-+
-+void LIST_Append(t_List *p_NewList, t_List *p_Head)
-+{
-+    t_List *p_First = LIST_FIRST(p_NewList);
-+
-+    if (p_First != p_NewList)
-+    {
-+        t_List *p_Last  = LIST_LAST(p_NewList);
-+        t_List *p_Cur   = LIST_NEXT(p_Head);
-+
-+        LIST_PREV(p_First) = p_Head;
-+        LIST_FIRST(p_Head) = p_First;
-+        LIST_NEXT(p_Last)  = p_Cur;
-+        LIST_LAST(p_Cur)   = p_Last;
-+    }
-+}
-+
-+
-+int LIST_NumOfObjs(t_List *p_List)
-+{
-+    t_List *p_Tmp;
-+    int    numOfObjs = 0;
-+
-+    if (!LIST_IsEmpty(p_List))
-+        LIST_FOR_EACH(p_Tmp, p_List)
-+            numOfObjs++;
-+
-+    return numOfObjs;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/etc/memcpy.c
-@@ -0,0 +1,620 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+
-+#include "std_ext.h"
-+#include "xx_ext.h"
-+#include "memcpy_ext.h"
-+
-+void * MemCpy8(void* pDst, void* pSrc, uint32_t size)
-+{
-+    int i;
-+
-+    for(i = 0; i < size; ++i)
-+        *(((uint8_t*)(pDst)) + i) = *(((uint8_t*)(pSrc)) + i);
-+
-+    return pDst;
-+}
-+
-+void * MemSet8(void* pDst, int c, uint32_t size)
-+{
-+    int i;
-+
-+    for(i = 0; i < size; ++i)
-+        *(((uint8_t*)(pDst)) + i) = (uint8_t)(c);
-+
-+    return pDst;
-+}
-+
-+void * MemCpy32(void* pDst,void* pSrc, uint32_t size)
-+{
-+    uint32_t leftAlign;
-+    uint32_t rightAlign;
-+    uint32_t lastWord;
-+    uint32_t currWord;
-+    uint32_t *p_Src32;
-+    uint32_t *p_Dst32;
-+    uint8_t  *p_Src8;
-+    uint8_t  *p_Dst8;
-+
-+    p_Src8 = (uint8_t*)(pSrc);
-+    p_Dst8 = (uint8_t*)(pDst);
-+    /* first copy byte by byte till the source first alignment
-+     * this step is necessary to ensure we do not even try to access
-+     * data which is before the source buffer, hence it is not ours.
-+     */
-+    while((PTR_TO_UINT(p_Src8) & 3) && size) /* (pSrc mod 4) > 0 and size > 0 */
-+    {
-+        *p_Dst8++ = *p_Src8++;
-+        size--;
-+    }
-+
-+    /* align destination (possibly disaligning source)*/
-+    while((PTR_TO_UINT(p_Dst8) & 3) && size) /* (pDst mod 4) > 0 and size > 0 */
-+    {
-+        *p_Dst8++ = *p_Src8++;
-+        size--;
-+    }
-+
-+    /* dest is aligned and source is not necessarily aligned */
-+    leftAlign = (uint32_t)((PTR_TO_UINT(p_Src8) & 3) << 3); /* leftAlign = (pSrc mod 4)*8 */
-+    rightAlign = 32 - leftAlign;
-+
-+
-+    if (leftAlign == 0)
-+    {
-+        /* source is also aligned */
-+        p_Src32 = (uint32_t*)(p_Src8);
-+        p_Dst32 = (uint32_t*)(p_Dst8);
-+        while (size >> 2) /* size >= 4 */
-+        {
-+            *p_Dst32++ = *p_Src32++;
-+            size -= 4;
-+        }
-+        p_Src8 = (uint8_t*)(p_Src32);
-+        p_Dst8 = (uint8_t*)(p_Dst32);
-+    }
-+    else
-+    {
-+        /* source is not aligned (destination is aligned)*/
-+        p_Src32 = (uint32_t*)(p_Src8 - (leftAlign >> 3));
-+        p_Dst32 = (uint32_t*)(p_Dst8);
-+        lastWord = *p_Src32++;
-+        while(size >> 3) /* size >= 8 */
-+        {
-+            currWord = *p_Src32;
-+            *p_Dst32 = (lastWord << leftAlign) | (currWord >> rightAlign);
-+            lastWord = currWord;
-+            p_Src32++;
-+            p_Dst32++;
-+            size -= 4;
-+        }
-+        p_Dst8 = (uint8_t*)(p_Dst32);
-+        p_Src8 = (uint8_t*)(p_Src32) - 4 + (leftAlign >> 3);
-+    }
-+
-+    /* complete the left overs */
-+    while (size--)
-+        *p_Dst8++ = *p_Src8++;
-+
-+    return pDst;
-+}
-+
-+void * IO2IOCpy32(void* pDst,void* pSrc, uint32_t size)
-+{
-+    uint32_t leftAlign;
-+    uint32_t rightAlign;
-+    uint32_t lastWord;
-+    uint32_t currWord;
-+    uint32_t *p_Src32;
-+    uint32_t *p_Dst32;
-+    uint8_t  *p_Src8;
-+    uint8_t  *p_Dst8;
-+
-+    p_Src8 = (uint8_t*)(pSrc);
-+    p_Dst8 = (uint8_t*)(pDst);
-+    /* first copy byte by byte till the source first alignment
-+     * this step is necessary to ensure we do not even try to access
-+     * data which is before the source buffer, hence it is not ours.
-+     */
-+    while((PTR_TO_UINT(p_Src8) & 3) && size) /* (pSrc mod 4) > 0 and size > 0 */
-+    {
-+        WRITE_UINT8(*p_Dst8, GET_UINT8(*p_Src8));
-+        p_Dst8++;p_Src8++;
-+        size--;
-+    }
-+
-+    /* align destination (possibly disaligning source)*/
-+    while((PTR_TO_UINT(p_Dst8) & 3) && size) /* (pDst mod 4) > 0 and size > 0 */
-+    {
-+        WRITE_UINT8(*p_Dst8, GET_UINT8(*p_Src8));
-+        p_Dst8++;p_Src8++;
-+        size--;
-+    }
-+
-+    /* dest is aligned and source is not necessarily aligned */
-+    leftAlign = (uint32_t)((PTR_TO_UINT(p_Src8) & 3) << 3); /* leftAlign = (pSrc mod 4)*8 */
-+    rightAlign = 32 - leftAlign;
-+
-+    if (leftAlign == 0)
-+    {
-+        /* source is also aligned */
-+        p_Src32 = (uint32_t*)(p_Src8);
-+        p_Dst32 = (uint32_t*)(p_Dst8);
-+        while (size >> 2) /* size >= 4 */
-+        {
-+            WRITE_UINT32(*p_Dst32, GET_UINT32(*p_Src32));
-+            p_Dst32++;p_Src32++;
-+            size -= 4;
-+        }
-+        p_Src8 = (uint8_t*)(p_Src32);
-+        p_Dst8 = (uint8_t*)(p_Dst32);
-+    }
-+    else
-+    {
-+        /* source is not aligned (destination is aligned)*/
-+        p_Src32 = (uint32_t*)(p_Src8 - (leftAlign >> 3));
-+        p_Dst32 = (uint32_t*)(p_Dst8);
-+        lastWord = GET_UINT32(*p_Src32);
-+        p_Src32++;
-+        while(size >> 3) /* size >= 8 */
-+        {
-+            currWord = GET_UINT32(*p_Src32);
-+            WRITE_UINT32(*p_Dst32, (lastWord << leftAlign) | (currWord >> rightAlign));
-+            lastWord = currWord;
-+            p_Src32++;p_Dst32++;
-+            size -= 4;
-+        }
-+        p_Dst8 = (uint8_t*)(p_Dst32);
-+        p_Src8 = (uint8_t*)(p_Src32) - 4 + (leftAlign >> 3);
-+    }
-+
-+    /* complete the left overs */
-+    while (size--)
-+    {
-+        WRITE_UINT8(*p_Dst8, GET_UINT8(*p_Src8));
-+        p_Dst8++;p_Src8++;
-+    }
-+
-+    return pDst;
-+}
-+
-+void * Mem2IOCpy32(void* pDst,void* pSrc, uint32_t size)
-+{
-+    uint32_t leftAlign;
-+    uint32_t rightAlign;
-+    uint32_t lastWord;
-+    uint32_t currWord;
-+    uint32_t *p_Src32;
-+    uint32_t *p_Dst32;
-+    uint8_t  *p_Src8;
-+    uint8_t  *p_Dst8;
-+
-+    p_Src8 = (uint8_t*)(pSrc);
-+    p_Dst8 = (uint8_t*)(pDst);
-+    /* first copy byte by byte till the source first alignment
-+     * this step is necessary to ensure we do not even try to access
-+     * data which is before the source buffer, hence it is not ours.
-+     */
-+    while((PTR_TO_UINT(p_Src8) & 3) && size) /* (pSrc mod 4) > 0 and size > 0 */
-+    {
-+        WRITE_UINT8(*p_Dst8, *p_Src8);
-+        p_Dst8++;p_Src8++;
-+        size--;
-+    }
-+
-+    /* align destination (possibly disaligning source)*/
-+    while((PTR_TO_UINT(p_Dst8) & 3) && size) /* (pDst mod 4) > 0 and size > 0 */
-+    {
-+        WRITE_UINT8(*p_Dst8, *p_Src8);
-+        p_Dst8++;p_Src8++;
-+        size--;
-+    }
-+
-+    /* dest is aligned and source is not necessarily aligned */
-+    leftAlign = (uint32_t)((PTR_TO_UINT(p_Src8) & 3) << 3); /* leftAlign = (pSrc mod 4)*8 */
-+    rightAlign = 32 - leftAlign;
-+
-+    if (leftAlign == 0)
-+    {
-+        /* source is also aligned */
-+        p_Src32 = (uint32_t*)(p_Src8);
-+        p_Dst32 = (uint32_t*)(p_Dst8);
-+        while (size >> 2) /* size >= 4 */
-+        {
-+            WRITE_UINT32(*p_Dst32, *p_Src32);
-+            p_Dst32++;p_Src32++;
-+            size -= 4;
-+        }
-+        p_Src8 = (uint8_t*)(p_Src32);
-+        p_Dst8 = (uint8_t*)(p_Dst32);
-+    }
-+    else
-+    {
-+        /* source is not aligned (destination is aligned)*/
-+        p_Src32 = (uint32_t*)(p_Src8 - (leftAlign >> 3));
-+        p_Dst32 = (uint32_t*)(p_Dst8);
-+        lastWord = *p_Src32++;
-+        while(size >> 3) /* size >= 8 */
-+        {
-+            currWord = *p_Src32;
-+            WRITE_UINT32(*p_Dst32, (lastWord << leftAlign) | (currWord >> rightAlign));
-+            lastWord = currWord;
-+            p_Src32++;p_Dst32++;
-+            size -= 4;
-+        }
-+        p_Dst8 = (uint8_t*)(p_Dst32);
-+        p_Src8 = (uint8_t*)(p_Src32) - 4 + (leftAlign >> 3);
-+    }
-+
-+    /* complete the left overs */
-+    while (size--)
-+    {
-+        WRITE_UINT8(*p_Dst8, *p_Src8);
-+        p_Dst8++;p_Src8++;
-+    }
-+
-+    return pDst;
-+}
-+
-+void * IO2MemCpy32(void* pDst,void* pSrc, uint32_t size)
-+{
-+    uint32_t leftAlign;
-+    uint32_t rightAlign;
-+    uint32_t lastWord;
-+    uint32_t currWord;
-+    uint32_t *p_Src32;
-+    uint32_t *p_Dst32;
-+    uint8_t  *p_Src8;
-+    uint8_t  *p_Dst8;
-+
-+    p_Src8 = (uint8_t*)(pSrc);
-+    p_Dst8 = (uint8_t*)(pDst);
-+    /* first copy byte by byte till the source first alignment
-+     * this step is necessary to ensure we do not even try to access
-+     * data which is before the source buffer, hence it is not ours.
-+     */
-+    while((PTR_TO_UINT(p_Src8) & 3) && size) /* (pSrc mod 4) > 0 and size > 0 */
-+    {
-+        *p_Dst8 = GET_UINT8(*p_Src8);
-+        p_Dst8++;p_Src8++;
-+        size--;
-+    }
-+
-+    /* align destination (possibly disaligning source)*/
-+    while((PTR_TO_UINT(p_Dst8) & 3) && size) /* (pDst mod 4) > 0 and size > 0 */
-+    {
-+        *p_Dst8 = GET_UINT8(*p_Src8);
-+        p_Dst8++;p_Src8++;
-+        size--;
-+    }
-+
-+    /* dest is aligned and source is not necessarily aligned */
-+    leftAlign = (uint32_t)((PTR_TO_UINT(p_Src8) & 3) << 3); /* leftAlign = (pSrc mod 4)*8 */
-+    rightAlign = 32 - leftAlign;
-+
-+    if (leftAlign == 0)
-+    {
-+        /* source is also aligned */
-+        p_Src32 = (uint32_t*)(p_Src8);
-+        p_Dst32 = (uint32_t*)(p_Dst8);
-+        while (size >> 2) /* size >= 4 */
-+        {
-+            *p_Dst32 = GET_UINT32(*p_Src32);
-+            p_Dst32++;p_Src32++;
-+            size -= 4;
-+        }
-+        p_Src8 = (uint8_t*)(p_Src32);
-+        p_Dst8 = (uint8_t*)(p_Dst32);
-+    }
-+    else
-+    {
-+        /* source is not aligned (destination is aligned)*/
-+        p_Src32 = (uint32_t*)(p_Src8 - (leftAlign >> 3));
-+        p_Dst32 = (uint32_t*)(p_Dst8);
-+        lastWord = GET_UINT32(*p_Src32);
-+        p_Src32++;
-+        while(size >> 3) /* size >= 8 */
-+        {
-+            currWord = GET_UINT32(*p_Src32);
-+            *p_Dst32 = (lastWord << leftAlign) | (currWord >> rightAlign);
-+            lastWord = currWord;
-+            p_Src32++;p_Dst32++;
-+            size -= 4;
-+        }
-+        p_Dst8 = (uint8_t*)(p_Dst32);
-+        p_Src8 = (uint8_t*)(p_Src32) - 4 + (leftAlign >> 3);
-+    }
-+
-+    /* complete the left overs */
-+    while (size--)
-+    {
-+        *p_Dst8 = GET_UINT8(*p_Src8);
-+        p_Dst8++;p_Src8++;
-+    }
-+
-+    return pDst;
-+}
-+
-+void * MemCpy64(void* pDst,void* pSrc, uint32_t size)
-+{
-+    uint32_t leftAlign;
-+    uint32_t rightAlign;
-+    uint64_t lastWord;
-+    uint64_t currWord;
-+    uint64_t *pSrc64;
-+    uint64_t *pDst64;
-+    uint8_t  *p_Src8;
-+    uint8_t  *p_Dst8;
-+
-+    p_Src8 = (uint8_t*)(pSrc);
-+    p_Dst8 = (uint8_t*)(pDst);
-+    /* first copy byte by byte till the source first alignment
-+     * this step is necessarily to ensure we do not even try to access
-+     * data which is before the source buffer, hence it is not ours.
-+     */
-+    while((PTR_TO_UINT(p_Src8) & 7) && size) /* (pSrc mod 8) > 0 and size > 0 */
-+    {
-+        *p_Dst8++ = *p_Src8++;
-+        size--;
-+    }
-+
-+    /* align destination (possibly disaligning source)*/
-+    while((PTR_TO_UINT(p_Dst8) & 7) && size) /* (pDst mod 8) > 0 and size > 0 */
-+    {
-+        *p_Dst8++ = *p_Src8++;
-+        size--;
-+    }
-+
-+    /* dest is aligned and source is not necessarily aligned */
-+    leftAlign = (uint32_t)((PTR_TO_UINT(p_Src8) & 7) << 3); /* leftAlign = (pSrc mod 8)*8 */
-+    rightAlign = 64 - leftAlign;
-+
-+
-+    if (leftAlign == 0)
-+    {
-+        /* source is also aligned */
-+        pSrc64 = (uint64_t*)(p_Src8);
-+        pDst64 = (uint64_t*)(p_Dst8);
-+        while (size >> 3) /* size >= 8 */
-+        {
-+            *pDst64++ = *pSrc64++;
-+            size -= 8;
-+        }
-+        p_Src8 = (uint8_t*)(pSrc64);
-+        p_Dst8 = (uint8_t*)(pDst64);
-+    }
-+    else
-+    {
-+        /* source is not aligned (destination is aligned)*/
-+        pSrc64 = (uint64_t*)(p_Src8 - (leftAlign >> 3));
-+        pDst64 = (uint64_t*)(p_Dst8);
-+        lastWord = *pSrc64++;
-+        while(size >> 4) /* size >= 16 */
-+        {
-+            currWord = *pSrc64;
-+            *pDst64 = (lastWord << leftAlign) | (currWord >> rightAlign);
-+            lastWord = currWord;
-+            pSrc64++;
-+            pDst64++;
-+            size -= 8;
-+        }
-+        p_Dst8 = (uint8_t*)(pDst64);
-+        p_Src8 = (uint8_t*)(pSrc64) - 8 + (leftAlign >> 3);
-+    }
-+
-+    /* complete the left overs */
-+    while (size--)
-+        *p_Dst8++ = *p_Src8++;
-+
-+    return pDst;
-+}
-+
-+void * MemSet32(void* pDst, uint8_t val, uint32_t size)
-+{
-+    uint32_t val32;
-+    uint32_t *p_Dst32;
-+    uint8_t  *p_Dst8;
-+
-+    p_Dst8 = (uint8_t*)(pDst);
-+
-+    /* generate four 8-bit val's in 32-bit container */
-+    val32  = (uint32_t) val;
-+    val32 |= (val32 <<  8);
-+    val32 |= (val32 << 16);
-+
-+    /* align destination to 32 */
-+    while((PTR_TO_UINT(p_Dst8) & 3) && size) /* (pDst mod 4) > 0 and size > 0 */
-+    {
-+        *p_Dst8++ = val;
-+        size--;
-+    }
-+
-+    /* 32-bit chunks */
-+    p_Dst32 = (uint32_t*)(p_Dst8);
-+    while (size >> 2) /* size >= 4 */
-+    {
-+        *p_Dst32++ = val32;
-+        size -= 4;
-+    }
-+
-+    /* complete the leftovers */
-+    p_Dst8 = (uint8_t*)(p_Dst32);
-+    while (size--)
-+        *p_Dst8++ = val;
-+
-+    return pDst;
-+}
-+
-+void * IOMemSet32(void* pDst, uint8_t val, uint32_t size)
-+{
-+    uint32_t val32;
-+    uint32_t *p_Dst32;
-+    uint8_t  *p_Dst8;
-+
-+    p_Dst8 = (uint8_t*)(pDst);
-+
-+    /* generate four 8-bit val's in 32-bit container */
-+    val32  = (uint32_t) val;
-+    val32 |= (val32 <<  8);
-+    val32 |= (val32 << 16);
-+
-+    /* align destination to 32 */
-+    while((PTR_TO_UINT(p_Dst8) & 3) && size) /* (pDst mod 4) > 0 and size > 0 */
-+    {
-+        WRITE_UINT8(*p_Dst8, val);
-+        p_Dst8++;
-+        size--;
-+    }
-+
-+    /* 32-bit chunks */
-+    p_Dst32 = (uint32_t*)(p_Dst8);
-+    while (size >> 2) /* size >= 4 */
-+    {
-+        WRITE_UINT32(*p_Dst32, val32);
-+        p_Dst32++;
-+        size -= 4;
-+    }
-+
-+    /* complete the leftovers */
-+    p_Dst8 = (uint8_t*)(p_Dst32);
-+    while (size--)
-+    {
-+        WRITE_UINT8(*p_Dst8, val);
-+        p_Dst8++;
-+    }
-+
-+    return pDst;
-+}
-+
-+void * MemSet64(void* pDst, uint8_t val, uint32_t size)
-+{
-+    uint64_t val64;
-+    uint64_t *pDst64;
-+    uint8_t  *p_Dst8;
-+
-+    p_Dst8 = (uint8_t*)(pDst);
-+
-+    /* generate four 8-bit val's in 32-bit container */
-+    val64  = (uint64_t) val;
-+    val64 |= (val64 <<  8);
-+    val64 |= (val64 << 16);
-+    val64 |= (val64 << 24);
-+    val64 |= (val64 << 32);
-+
-+    /* align destination to 64 */
-+    while((PTR_TO_UINT(p_Dst8) & 7) && size) /* (pDst mod 8) > 0 and size > 0 */
-+    {
-+        *p_Dst8++ = val;
-+        size--;
-+    }
-+
-+    /* 64-bit chunks */
-+    pDst64 = (uint64_t*)(p_Dst8);
-+    while (size >> 4) /* size >= 8 */
-+    {
-+        *pDst64++ = val64;
-+        size -= 8;
-+    }
-+
-+    /* complete the leftovers */
-+    p_Dst8 = (uint8_t*)(pDst64);
-+    while (size--)
-+        *p_Dst8++ = val;
-+
-+    return pDst;
-+}
-+
-+void MemDisp(uint8_t *p, int size)
-+{
-+    uint32_t    space = (uint32_t)(PTR_TO_UINT(p) & 0x3);
-+    uint8_t     *p_Limit;
-+
-+    if (space)
-+    {
-+        p_Limit = (p - space + 4);
-+
-+        XX_Print("0x%08X: ", (p - space));
-+
-+        while (space--)
-+        {
-+            XX_Print("--");
-+        }
-+        while (size  && (p < p_Limit))
-+        {
-+            XX_Print("%02x", *(uint8_t*)p);
-+            size--;
-+            p++;
-+        }
-+
-+        XX_Print(" ");
-+        p_Limit += 12;
-+
-+        while ((size > 3) && (p < p_Limit))
-+        {
-+            XX_Print("%08x ", *(uint32_t*)p);
-+            size -= 4;
-+            p += 4;
-+        }
-+        XX_Print("\r\n");
-+    }
-+
-+    while (size > 15)
-+    {
-+        XX_Print("0x%08X: %08x %08x %08x %08x\r\n",
-+                 p, *(uint32_t *)p, *(uint32_t *)(p + 4),
-+                 *(uint32_t *)(p + 8), *(uint32_t *)(p + 12));
-+        size -= 16;
-+        p += 16;
-+    }
-+
-+    if (size)
-+    {
-+        XX_Print("0x%08X: ", p);
-+
-+        while (size > 3)
-+        {
-+            XX_Print("%08x ", *(uint32_t *)p);
-+            size -= 4;
-+            p += 4;
-+        }
-+        while (size)
-+        {
-+            XX_Print("%02x", *(uint8_t *)p);
-+            size--;
-+            p++;
-+        }
-+
-+        XX_Print("\r\n");
-+    }
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/etc/mm.c
-@@ -0,0 +1,1155 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#include "string_ext.h"
-+#include "error_ext.h"
-+#include "std_ext.h"
-+#include "part_ext.h"
-+#include "xx_ext.h"
-+
-+#include "mm.h"
-+
-+
-+
-+
-+/**********************************************************************
-+ *                     MM internal routines set                       *
-+ **********************************************************************/
-+
-+/****************************************************************
-+ *  Routine:   CreateBusyBlock
-+ *
-+ *  Description:
-+ *      Initializes a new busy block of "size" bytes and started
-+ *      rom "base" address. Each busy block has a name that
-+ *      specified the purpose of the memory allocation.
-+ *
-+ *  Arguments:
-+ *      base      - base address of the busy block
-+ *      size      - size of the busy block
-+ *      name      - name that specified the busy block
-+ *
-+ *  Return value:
-+ *      A pointer to new created structure returned on success;
-+ *      Otherwise, NULL.
-+ ****************************************************************/
-+static t_BusyBlock * CreateBusyBlock(uint64_t base, uint64_t size, char *name)
-+{
-+    t_BusyBlock *p_BusyBlock;
-+    uint32_t    n;
-+
-+    p_BusyBlock = (t_BusyBlock *)XX_Malloc(sizeof(t_BusyBlock));
-+    if ( !p_BusyBlock )
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+        return NULL;
-+    }
-+
-+    p_BusyBlock->base = base;
-+    p_BusyBlock->end = base + size;
-+
-+    n = strlen(name);
-+    if (n >= MM_MAX_NAME_LEN)
-+        n = MM_MAX_NAME_LEN - 1;
-+    strncpy(p_BusyBlock->name, name, MM_MAX_NAME_LEN-1);
-+    p_BusyBlock->name[n] = '\0';
-+    p_BusyBlock->p_Next = 0;
-+
-+    return p_BusyBlock;
-+}
-+
-+/****************************************************************
-+ *  Routine:   CreateNewBlock
-+ *
-+ *  Description:
-+ *      Initializes a new memory block of "size" bytes and started
-+ *      from "base" address.
-+ *
-+ *  Arguments:
-+ *      base    - base address of the memory block
-+ *      size    - size of the memory block
-+ *
-+ *  Return value:
-+ *      A pointer to new created structure returned on success;
-+ *      Otherwise, NULL.
-+ ****************************************************************/
-+static t_MemBlock * CreateNewBlock(uint64_t base, uint64_t size)
-+{
-+    t_MemBlock *p_MemBlock;
-+
-+    p_MemBlock = (t_MemBlock *)XX_Malloc(sizeof(t_MemBlock));
-+    if ( !p_MemBlock )
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+        return NULL;
-+    }
-+
-+    p_MemBlock->base = base;
-+    p_MemBlock->end = base+size;
-+    p_MemBlock->p_Next = 0;
-+
-+    return p_MemBlock;
-+}
-+
-+/****************************************************************
-+ *  Routine:   CreateFreeBlock
-+ *
-+ *  Description:
-+ *      Initializes a new free block of of "size" bytes and
-+ *      started from "base" address.
-+ *
-+ *  Arguments:
-+ *      base      - base address of the free block
-+ *      size      - size of the free block
-+ *
-+ *  Return value:
-+ *      A pointer to new created structure returned on success;
-+ *      Otherwise, NULL.
-+ ****************************************************************/
-+static t_FreeBlock * CreateFreeBlock(uint64_t base, uint64_t size)
-+{
-+    t_FreeBlock *p_FreeBlock;
-+
-+    p_FreeBlock = (t_FreeBlock *)XX_Malloc(sizeof(t_FreeBlock));
-+    if ( !p_FreeBlock )
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+        return NULL;
-+    }
-+
-+    p_FreeBlock->base = base;
-+    p_FreeBlock->end = base + size;
-+    p_FreeBlock->p_Next = 0;
-+
-+    return p_FreeBlock;
-+}
-+
-+/****************************************************************
-+ *  Routine:    AddFree
-+ *
-+ *  Description:
-+ *      Adds a new free block to the free lists. It updates each
-+ *      free list to include a new free block.
-+ *      Note, that all free block in each free list are ordered
-+ *      by their base address.
-+ *
-+ *  Arguments:
-+ *      p_MM  - pointer to the MM object
-+ *      base  - base address of a given free block
-+ *      end   - end address of a given free block
-+ *
-+ *  Return value:
-+ *
-+ *
-+ ****************************************************************/
-+static t_Error AddFree(t_MM *p_MM, uint64_t base, uint64_t end)
-+{
-+    t_FreeBlock *p_PrevB, *p_CurrB, *p_NewB;
-+    uint64_t    alignment;
-+    uint64_t    alignBase;
-+    int         i;
-+
-+    /* Updates free lists to include  a just released block */
-+    for (i=0; i <= MM_MAX_ALIGNMENT; i++)
-+    {
-+        p_PrevB = p_NewB = 0;
-+        p_CurrB = p_MM->freeBlocks[i];
-+
-+        alignment = (uint64_t)(0x1 << i);
-+        alignBase = MAKE_ALIGNED(base, alignment);
-+
-+        /* Goes to the next free list if there is no block to free */
-+        if (alignBase >= end)
-+            continue;
-+
-+        /* Looks for a free block that should be updated */
-+        while ( p_CurrB )
-+        {
-+            if ( alignBase <= p_CurrB->end )
-+            {
-+                if ( end > p_CurrB->end )
-+                {
-+                    t_FreeBlock *p_NextB;
-+                    while ( p_CurrB->p_Next && end > p_CurrB->p_Next->end )
-+                    {
-+                        p_NextB = p_CurrB->p_Next;
-+                        p_CurrB->p_Next = p_CurrB->p_Next->p_Next;
-+                        XX_Free(p_NextB);
-+                    }
-+
-+                    p_NextB = p_CurrB->p_Next;
-+                    if ( !p_NextB || (p_NextB && end < p_NextB->base) )
-+                    {
-+                        p_CurrB->end = end;
-+                    }
-+                    else
-+                    {
-+                        p_CurrB->end = p_NextB->end;
-+                        p_CurrB->p_Next = p_NextB->p_Next;
-+                        XX_Free(p_NextB);
-+                    }
-+                }
-+                else if ( (end < p_CurrB->base) && ((end-alignBase) >= alignment) )
-+                {
-+                    if ((p_NewB = CreateFreeBlock(alignBase, end-alignBase)) == NULL)
-+                        RETURN_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+
-+                    p_NewB->p_Next = p_CurrB;
-+                    if (p_PrevB)
-+                        p_PrevB->p_Next = p_NewB;
-+                    else
-+                        p_MM->freeBlocks[i] = p_NewB;
-+                    break;
-+                }
-+
-+                if ((alignBase < p_CurrB->base) && (end >= p_CurrB->base))
-+                {
-+                    p_CurrB->base = alignBase;
-+                }
-+
-+                /* if size of the free block is less then alignment
-+                 * deletes that free block from the free list. */
-+                if ( (p_CurrB->end - p_CurrB->base) < alignment)
-+                {
-+                    if ( p_PrevB )
-+                        p_PrevB->p_Next = p_CurrB->p_Next;
-+                    else
-+                        p_MM->freeBlocks[i] = p_CurrB->p_Next;
-+                    XX_Free(p_CurrB);
-+                    p_CurrB = NULL;
-+                }
-+                break;
-+            }
-+            else
-+            {
-+                p_PrevB = p_CurrB;
-+                p_CurrB = p_CurrB->p_Next;
-+            }
-+        }
-+
-+        /* If no free block found to be updated, insert a new free block
-+         * to the end of the free list.
-+         */
-+        if ( !p_CurrB && ((((uint64_t)(end-base)) & ((uint64_t)(alignment-1))) == 0) )
-+        {
-+            if ((p_NewB = CreateFreeBlock(alignBase, end-base)) == NULL)
-+                RETURN_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+
-+            if (p_PrevB)
-+                p_PrevB->p_Next = p_NewB;
-+            else
-+                p_MM->freeBlocks[i] = p_NewB;
-+        }
-+
-+        /* Update boundaries of the new free block */
-+        if ((alignment == 1) && !p_NewB)
-+        {
-+            if ( p_CurrB && base > p_CurrB->base )
-+                base = p_CurrB->base;
-+            if ( p_CurrB && end < p_CurrB->end )
-+                end = p_CurrB->end;
-+        }
-+    }
-+
-+    return (E_OK);
-+}
-+
-+/****************************************************************
-+ *  Routine:      CutFree
-+ *
-+ *  Description:
-+ *      Cuts a free block from holdBase to holdEnd from the free lists.
-+ *      That is, it updates all free lists of the MM object do
-+ *      not include a block of memory from holdBase to holdEnd.
-+ *      For each free lists it seek for a free block that holds
-+ *      either holdBase or holdEnd. If such block is found it updates it.
-+ *
-+ *  Arguments:
-+ *      p_MM            - pointer to the MM object
-+ *      holdBase        - base address of the allocated block
-+ *      holdEnd         - end address of the allocated block
-+ *
-+ *  Return value:
-+ *      E_OK is returned on success,
-+ *      otherwise returns an error code.
-+ *
-+ ****************************************************************/
-+static t_Error CutFree(t_MM *p_MM, uint64_t holdBase, uint64_t holdEnd)
-+{
-+    t_FreeBlock *p_PrevB, *p_CurrB, *p_NewB;
-+    uint64_t    alignBase, base, end;
-+    uint64_t    alignment;
-+    int         i;
-+
-+    for (i=0; i <= MM_MAX_ALIGNMENT; i++)
-+    {
-+        p_PrevB = p_NewB = 0;
-+        p_CurrB = p_MM->freeBlocks[i];
-+
-+        alignment = (uint64_t)(0x1 << i);
-+        alignBase = MAKE_ALIGNED(holdEnd, alignment);
-+
-+        while ( p_CurrB )
-+        {
-+            base = p_CurrB->base;
-+            end = p_CurrB->end;
-+
-+            if ( (holdBase <= base) && (holdEnd <= end) && (holdEnd > base) )
-+            {
-+                if ( alignBase >= end ||
-+                     (alignBase < end && ((end-alignBase) < alignment)) )
-+                {
-+                    if (p_PrevB)
-+                        p_PrevB->p_Next = p_CurrB->p_Next;
-+                    else
-+                        p_MM->freeBlocks[i] = p_CurrB->p_Next;
-+                    XX_Free(p_CurrB);
-+                }
-+                else
-+                {
-+                    p_CurrB->base = alignBase;
-+                }
-+                break;
-+            }
-+            else if ( (holdBase > base) && (holdEnd <= end) )
-+            {
-+                if ( (holdBase-base) >= alignment )
-+                {
-+                    if ( (alignBase < end) && ((end-alignBase) >= alignment) )
-+                    {
-+                        if ((p_NewB = CreateFreeBlock(alignBase, end-alignBase)) == NULL)
-+                            RETURN_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+                        p_NewB->p_Next = p_CurrB->p_Next;
-+                        p_CurrB->p_Next = p_NewB;
-+                    }
-+                    p_CurrB->end = holdBase;
-+                }
-+                else if ( (alignBase < end) && ((end-alignBase) >= alignment) )
-+                {
-+                    p_CurrB->base = alignBase;
-+                }
-+                else
-+                {
-+                    if (p_PrevB)
-+                        p_PrevB->p_Next = p_CurrB->p_Next;
-+                    else
-+                        p_MM->freeBlocks[i] = p_CurrB->p_Next;
-+                    XX_Free(p_CurrB);
-+                }
-+                break;
-+            }
-+            else
-+            {
-+                p_PrevB = p_CurrB;
-+                p_CurrB = p_CurrB->p_Next;
-+            }
-+        }
-+    }
-+
-+    return (E_OK);
-+}
-+
-+/****************************************************************
-+ *  Routine:     AddBusy
-+ *
-+ *  Description:
-+ *      Adds a new busy block to the list of busy blocks. Note,
-+ *      that all busy blocks are ordered by their base address in
-+ *      the busy list.
-+ *
-+ *  Arguments:
-+ *      MM              - handler to the MM object
-+ *      p_NewBusyB      - pointer to the a busy block
-+ *
-+ *  Return value:
-+ *      None.
-+ *
-+ ****************************************************************/
-+static void AddBusy(t_MM *p_MM, t_BusyBlock *p_NewBusyB)
-+{
-+    t_BusyBlock *p_CurrBusyB, *p_PrevBusyB;
-+
-+    /* finds a place of a new busy block in the list of busy blocks */
-+    p_PrevBusyB = 0;
-+    p_CurrBusyB = p_MM->busyBlocks;
-+
-+    while ( p_CurrBusyB && p_NewBusyB->base > p_CurrBusyB->base )
-+    {
-+        p_PrevBusyB = p_CurrBusyB;
-+        p_CurrBusyB = p_CurrBusyB->p_Next;
-+    }
-+
-+    /* insert the new busy block into the list of busy blocks */
-+    if ( p_CurrBusyB )
-+        p_NewBusyB->p_Next = p_CurrBusyB;
-+    if ( p_PrevBusyB )
-+        p_PrevBusyB->p_Next = p_NewBusyB;
-+    else
-+        p_MM->busyBlocks = p_NewBusyB;
-+}
-+
-+/****************************************************************
-+ *  Routine:    CutBusy
-+ *
-+ *  Description:
-+ *      Cuts a block from base to end from the list of busy blocks.
-+ *      This is done by updating the list of busy blocks do not
-+ *      include a given block, that block is going to be free. If a
-+ *      given block is a part of some other busy block, so that
-+ *      busy block is updated. If there are number of busy blocks
-+ *      included in the given block, so all that blocks are removed
-+ *      from the busy list and the end blocks are updated.
-+ *      If the given block devides some block into two parts, a new
-+ *      busy block is added to the busy list.
-+ *
-+ *  Arguments:
-+ *      p_MM  - pointer to the MM object
-+ *      base  - base address of a given busy block
-+ *      end   - end address of a given busy block
-+ *
-+ *  Return value:
-+ *      E_OK on success, E_NOMEMORY otherwise.
-+ *
-+ ****************************************************************/
-+static t_Error CutBusy(t_MM *p_MM, uint64_t base, uint64_t end)
-+{
-+    t_BusyBlock  *p_CurrB, *p_PrevB, *p_NewB;
-+
-+    p_CurrB = p_MM->busyBlocks;
-+    p_PrevB = p_NewB = 0;
-+
-+    while ( p_CurrB )
-+    {
-+        if ( base < p_CurrB->end )
-+        {
-+            if ( end > p_CurrB->end )
-+            {
-+                t_BusyBlock *p_NextB;
-+                while ( p_CurrB->p_Next && end >= p_CurrB->p_Next->end )
-+                {
-+                    p_NextB = p_CurrB->p_Next;
-+                    p_CurrB->p_Next = p_CurrB->p_Next->p_Next;
-+                    XX_Free(p_NextB);
-+                }
-+
-+                p_NextB = p_CurrB->p_Next;
-+                if ( p_NextB && end > p_NextB->base )
-+                {
-+                    p_NextB->base = end;
-+                }
-+            }
-+
-+            if ( base <= p_CurrB->base )
-+            {
-+                if ( end < p_CurrB->end && end > p_CurrB->base )
-+                {
-+                    p_CurrB->base = end;
-+                }
-+                else if ( end >= p_CurrB->end )
-+                {
-+                    if ( p_PrevB )
-+                        p_PrevB->p_Next = p_CurrB->p_Next;
-+                    else
-+                        p_MM->busyBlocks = p_CurrB->p_Next;
-+                    XX_Free(p_CurrB);
-+                }
-+            }
-+            else
-+            {
-+                if ( end < p_CurrB->end && end > p_CurrB->base )
-+                {
-+                    if ((p_NewB = CreateBusyBlock(end,
-+                                                  p_CurrB->end-end,
-+                                                  p_CurrB->name)) == NULL)
-+                        RETURN_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+                    p_NewB->p_Next = p_CurrB->p_Next;
-+                    p_CurrB->p_Next = p_NewB;
-+                }
-+                p_CurrB->end = base;
-+            }
-+            break;
-+        }
-+        else
-+        {
-+            p_PrevB = p_CurrB;
-+            p_CurrB = p_CurrB->p_Next;
-+        }
-+    }
-+
-+    return (E_OK);
-+}
-+
-+/****************************************************************
-+ *  Routine:     MmGetGreaterAlignment
-+ *
-+ *  Description:
-+ *      Allocates a block of memory according to the given size
-+ *      and the alignment. That routine is called from the MM_Get
-+ *      routine if the required alignment is greater then MM_MAX_ALIGNMENT.
-+ *      In that case, it goes over free blocks of 64 byte align list
-+ *      and checks if it has the required size of bytes of the required
-+ *      alignment. If no blocks found returns ILLEGAL_BASE.
-+ *      After the block is found and data is allocated, it calls
-+ *      the internal CutFree routine to update all free lists
-+ *      do not include a just allocated block. Of course, each
-+ *      free list contains a free blocks with the same alignment.
-+ *      It is also creates a busy block that holds
-+ *      information about an allocated block.
-+ *
-+ *  Arguments:
-+ *      MM              - handle to the MM object
-+ *      size            - size of the MM
-+ *      alignment       - index as a power of two defines
-+ *                        a required alignment that is greater then 64.
-+ *      name            - the name that specifies an allocated block.
-+ *
-+ *  Return value:
-+ *      base address of an allocated block.
-+ *      ILLEGAL_BASE if can't allocate a block
-+ *
-+ ****************************************************************/
-+static uint64_t MmGetGreaterAlignment(t_MM *p_MM, uint64_t size, uint64_t alignment, char* name)
-+{
-+    t_FreeBlock *p_FreeB;
-+    t_BusyBlock *p_NewBusyB;
-+    uint64_t    holdBase, holdEnd, alignBase = 0;
-+
-+    /* goes over free blocks of the 64 byte alignment list
-+       and look for a block of the suitable size and
-+       base address according to the alignment. */
-+    p_FreeB = p_MM->freeBlocks[MM_MAX_ALIGNMENT];
-+
-+    while ( p_FreeB )
-+    {
-+        alignBase = MAKE_ALIGNED(p_FreeB->base, alignment);
-+
-+        /* the block is found if the aligned base inside the block
-+         * and has the anough size. */
-+        if ( alignBase >= p_FreeB->base &&
-+             alignBase < p_FreeB->end &&
-+             size <= (p_FreeB->end - alignBase) )
-+            break;
-+        else
-+            p_FreeB = p_FreeB->p_Next;
-+    }
-+
-+    /* If such block isn't found */
-+    if ( !p_FreeB )
-+        return (uint64_t)(ILLEGAL_BASE);
-+
-+    holdBase = alignBase;
-+    holdEnd = alignBase + size;
-+
-+    /* init a new busy block */
-+    if ((p_NewBusyB = CreateBusyBlock(holdBase, size, name)) == NULL)
-+        return (uint64_t)(ILLEGAL_BASE);
-+
-+    /* calls Update routine to update a lists of free blocks */
-+    if ( CutFree ( p_MM, holdBase, holdEnd ) != E_OK )
-+    {
-+        XX_Free(p_NewBusyB);
-+        return (uint64_t)(ILLEGAL_BASE);
-+    }
-+
-+    /* insert the new busy block into the list of busy blocks */
-+    AddBusy ( p_MM, p_NewBusyB );
-+
-+    return (holdBase);
-+}
-+
-+
-+/**********************************************************************
-+ *                     MM API routines set                            *
-+ **********************************************************************/
-+
-+/*****************************************************************************/
-+t_Error MM_Init(t_Handle *h_MM, uint64_t base, uint64_t size)
-+{
-+    t_MM        *p_MM;
-+    uint64_t    newBase, newSize;
-+    int         i;
-+
-+    if (!size)
-+    {
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Size (should be positive)"));
-+    }
-+
-+    /* Initializes a new MM object */
-+    p_MM = (t_MM *)XX_Malloc(sizeof(t_MM));
-+    if (!p_MM)
-+    {
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+    }
-+
-+    p_MM->h_Spinlock = XX_InitSpinlock();
-+    if (!p_MM->h_Spinlock)
-+    {
-+        XX_Free(p_MM);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, ("MM spinlock!"));
-+    }
-+
-+    /* Initializes counter of free memory to total size */
-+    p_MM->freeMemSize = size;
-+
-+    /* A busy list is empty */
-+    p_MM->busyBlocks = 0;
-+
-+    /* Initializes a new memory block */
-+    if ((p_MM->memBlocks = CreateNewBlock(base, size)) == NULL)
-+    {
-+        MM_Free(p_MM);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+    }
-+
-+    /* Initializes a new free block for each free list*/
-+    for (i=0; i <= MM_MAX_ALIGNMENT; i++)
-+    {
-+        newBase = MAKE_ALIGNED( base, (0x1 << i) );
-+        newSize = size - (newBase - base);
-+
-+        if ((p_MM->freeBlocks[i] = CreateFreeBlock(newBase, newSize)) == NULL)
-+        {
-+            MM_Free(p_MM);
-+            RETURN_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+        }
-+    }
-+
-+    *h_MM = p_MM;
-+
-+    return (E_OK);
-+}
-+
-+/*****************************************************************************/
-+void MM_Free(t_Handle h_MM)
-+{
-+    t_MM        *p_MM = (t_MM *)h_MM;
-+    t_MemBlock  *p_MemBlock;
-+    t_BusyBlock *p_BusyBlock;
-+    t_FreeBlock *p_FreeBlock;
-+    void        *p_Block;
-+    int         i;
-+
-+    ASSERT_COND(p_MM);
-+
-+    /* release memory allocated for busy blocks */
-+    p_BusyBlock = p_MM->busyBlocks;
-+    while ( p_BusyBlock )
-+    {
-+        p_Block = p_BusyBlock;
-+        p_BusyBlock = p_BusyBlock->p_Next;
-+        XX_Free(p_Block);
-+    }
-+
-+    /* release memory allocated for free blocks */
-+    for (i=0; i <= MM_MAX_ALIGNMENT; i++)
-+    {
-+        p_FreeBlock = p_MM->freeBlocks[i];
-+        while ( p_FreeBlock )
-+        {
-+            p_Block = p_FreeBlock;
-+            p_FreeBlock = p_FreeBlock->p_Next;
-+            XX_Free(p_Block);
-+        }
-+    }
-+
-+    /* release memory allocated for memory blocks */
-+    p_MemBlock = p_MM->memBlocks;
-+    while ( p_MemBlock )
-+    {
-+        p_Block = p_MemBlock;
-+        p_MemBlock = p_MemBlock->p_Next;
-+        XX_Free(p_Block);
-+    }
-+
-+    if (p_MM->h_Spinlock)
-+        XX_FreeSpinlock(p_MM->h_Spinlock);
-+
-+    /* release memory allocated for MM object itself */
-+    XX_Free(p_MM);
-+}
-+
-+/*****************************************************************************/
-+uint64_t MM_Get(t_Handle h_MM, uint64_t size, uint64_t alignment, char* name)
-+{
-+    t_MM        *p_MM = (t_MM *)h_MM;
-+    t_FreeBlock *p_FreeB;
-+    t_BusyBlock *p_NewBusyB;
-+    uint64_t    holdBase, holdEnd, j, i = 0;
-+    uint32_t    intFlags;
-+
-+    SANITY_CHECK_RETURN_VALUE(p_MM, E_INVALID_HANDLE, (uint64_t)ILLEGAL_BASE);
-+
-+    /* checks that alignment value is greater then zero */
-+    if (alignment == 0)
-+    {
-+        alignment = 1;
-+    }
-+
-+    j = alignment;
-+
-+    /* checks if alignment is a power of two, if it correct and if the
-+       required size is multiple of the given alignment. */
-+    while ((j & 0x1) == 0)
-+    {
-+        i++;
-+        j = j >> 1;
-+    }
-+
-+    /* if the given alignment isn't power of two, returns an error */
-+    if (j != 1)
-+    {
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("alignment (should be power of 2)"));
-+        return (uint64_t)ILLEGAL_BASE;
-+    }
-+
-+    if (i > MM_MAX_ALIGNMENT)
-+    {
-+        return (MmGetGreaterAlignment(p_MM, size, alignment, name));
-+    }
-+
-+    intFlags = XX_LockIntrSpinlock(p_MM->h_Spinlock);
-+    /* look for a block of the size greater or equal to the required size. */
-+    p_FreeB = p_MM->freeBlocks[i];
-+    while ( p_FreeB && (p_FreeB->end - p_FreeB->base) < size )
-+        p_FreeB = p_FreeB->p_Next;
-+
-+    /* If such block is found */
-+    if ( !p_FreeB )
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        return (uint64_t)(ILLEGAL_BASE);
-+    }
-+
-+    holdBase = p_FreeB->base;
-+    holdEnd = holdBase + size;
-+
-+    /* init a new busy block */
-+    if ((p_NewBusyB = CreateBusyBlock(holdBase, size, name)) == NULL)
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        return (uint64_t)(ILLEGAL_BASE);
-+    }
-+
-+    /* calls Update routine to update a lists of free blocks */
-+    if ( CutFree ( p_MM, holdBase, holdEnd ) != E_OK )
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        XX_Free(p_NewBusyB);
-+        return (uint64_t)(ILLEGAL_BASE);
-+    }
-+
-+    /* Decreasing the allocated memory size from free memory size */
-+    p_MM->freeMemSize -= size;
-+
-+    /* insert the new busy block into the list of busy blocks */
-+    AddBusy ( p_MM, p_NewBusyB );
-+    XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+
-+    return (holdBase);
-+}
-+
-+/*****************************************************************************/
-+uint64_t MM_GetForce(t_Handle h_MM, uint64_t base, uint64_t size, char* name)
-+{
-+    t_MM        *p_MM = (t_MM *)h_MM;
-+    t_FreeBlock *p_FreeB;
-+    t_BusyBlock *p_NewBusyB;
-+    uint32_t    intFlags;
-+    bool        blockIsFree = FALSE;
-+
-+    ASSERT_COND(p_MM);
-+
-+    intFlags = XX_LockIntrSpinlock(p_MM->h_Spinlock);
-+    p_FreeB = p_MM->freeBlocks[0]; /* The biggest free blocks are in the
-+                                      free list with alignment 1 */
-+
-+    while ( p_FreeB )
-+    {
-+        if ( base >= p_FreeB->base && (base+size) <= p_FreeB->end )
-+        {
-+            blockIsFree = TRUE;
-+            break;
-+        }
-+        else
-+            p_FreeB = p_FreeB->p_Next;
-+    }
-+
-+    if ( !blockIsFree )
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        return (uint64_t)(ILLEGAL_BASE);
-+    }
-+
-+    /* init a new busy block */
-+    if ((p_NewBusyB = CreateBusyBlock(base, size, name)) == NULL)
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        return (uint64_t)(ILLEGAL_BASE);
-+    }
-+
-+    /* calls Update routine to update a lists of free blocks */
-+    if ( CutFree ( p_MM, base, base+size ) != E_OK )
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        XX_Free(p_NewBusyB);
-+        return (uint64_t)(ILLEGAL_BASE);
-+    }
-+
-+    /* Decreasing the allocated memory size from free memory size */
-+    p_MM->freeMemSize -= size;
-+
-+    /* insert the new busy block into the list of busy blocks */
-+    AddBusy ( p_MM, p_NewBusyB );
-+    XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+
-+    return (base);
-+}
-+
-+/*****************************************************************************/
-+uint64_t MM_GetForceMin(t_Handle h_MM, uint64_t size, uint64_t alignment, uint64_t min, char* name)
-+{
-+    t_MM        *p_MM = (t_MM *)h_MM;
-+    t_FreeBlock *p_FreeB;
-+    t_BusyBlock *p_NewBusyB;
-+    uint64_t    holdBase, holdEnd, j = alignment, i=0;
-+    uint32_t    intFlags;
-+
-+    ASSERT_COND(p_MM);
-+
-+    /* checks if alignment is a power of two, if it correct and if the
-+       required size is multiple of the given alignment. */
-+    while ((j & 0x1) == 0)
-+    {
-+        i++;
-+        j = j >> 1;
-+    }
-+
-+    if ( (j != 1) || (i > MM_MAX_ALIGNMENT) )
-+    {
-+        return (uint64_t)(ILLEGAL_BASE);
-+    }
-+
-+    intFlags = XX_LockIntrSpinlock(p_MM->h_Spinlock);
-+    p_FreeB = p_MM->freeBlocks[i];
-+
-+    /* look for the first block that contains the minimum
-+       base address. If the whole required size may be fit
-+       into it, use that block, otherwise look for the next
-+       block of size greater or equal to the required size. */
-+    while ( p_FreeB && (min >= p_FreeB->end))
-+            p_FreeB = p_FreeB->p_Next;
-+
-+    /* If such block is found */
-+    if ( !p_FreeB )
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        return (uint64_t)(ILLEGAL_BASE);
-+    }
-+
-+    /* if this block is large enough, use this block */
-+    holdBase = ( min <= p_FreeB->base ) ? p_FreeB->base : min;
-+    if ((holdBase + size) <= p_FreeB->end )
-+    {
-+        holdEnd = holdBase + size;
-+    }
-+    else
-+    {
-+        p_FreeB = p_FreeB->p_Next;
-+        while ( p_FreeB && ((p_FreeB->end - p_FreeB->base) < size) )
-+            p_FreeB = p_FreeB->p_Next;
-+
-+        /* If such block is found */
-+        if ( !p_FreeB )
-+        {
-+            XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+            return (uint64_t)(ILLEGAL_BASE);
-+        }
-+
-+        holdBase = p_FreeB->base;
-+        holdEnd = holdBase + size;
-+    }
-+
-+    /* init a new busy block */
-+    if ((p_NewBusyB = CreateBusyBlock(holdBase, size, name)) == NULL)
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        return (uint64_t)(ILLEGAL_BASE);
-+    }
-+
-+    /* calls Update routine to update a lists of free blocks */
-+    if ( CutFree( p_MM, holdBase, holdEnd ) != E_OK )
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        XX_Free(p_NewBusyB);
-+        return (uint64_t)(ILLEGAL_BASE);
-+    }
-+
-+    /* Decreasing the allocated memory size from free memory size */
-+    p_MM->freeMemSize -= size;
-+
-+    /* insert the new busy block into the list of busy blocks */
-+    AddBusy( p_MM, p_NewBusyB );
-+    XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+
-+    return (holdBase);
-+}
-+
-+/*****************************************************************************/
-+uint64_t MM_Put(t_Handle h_MM, uint64_t base)
-+{
-+    t_MM        *p_MM = (t_MM *)h_MM;
-+    t_BusyBlock *p_BusyB, *p_PrevBusyB;
-+    uint64_t    size;
-+    uint32_t    intFlags;
-+
-+    ASSERT_COND(p_MM);
-+
-+    /* Look for a busy block that have the given base value.
-+     * That block will be returned back to the memory.
-+     */
-+    p_PrevBusyB = 0;
-+
-+    intFlags = XX_LockIntrSpinlock(p_MM->h_Spinlock);
-+    p_BusyB = p_MM->busyBlocks;
-+    while ( p_BusyB && base != p_BusyB->base )
-+    {
-+        p_PrevBusyB = p_BusyB;
-+        p_BusyB = p_BusyB->p_Next;
-+    }
-+
-+    if ( !p_BusyB )
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        return (uint64_t)(0);
-+    }
-+
-+    if ( AddFree( p_MM, p_BusyB->base, p_BusyB->end ) != E_OK )
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        return (uint64_t)(0);
-+    }
-+
-+    /* removes a busy block form the list of busy blocks */
-+    if ( p_PrevBusyB )
-+        p_PrevBusyB->p_Next = p_BusyB->p_Next;
-+    else
-+        p_MM->busyBlocks = p_BusyB->p_Next;
-+
-+    size = p_BusyB->end - p_BusyB->base;
-+
-+    /* Adding the deallocated memory size to free memory size */
-+    p_MM->freeMemSize += size;
-+
-+    XX_Free(p_BusyB);
-+    XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+
-+    return (size);
-+}
-+
-+/*****************************************************************************/
-+uint64_t MM_PutForce(t_Handle h_MM, uint64_t base, uint64_t size)
-+{
-+    t_MM        *p_MM = (t_MM *)h_MM;
-+    uint64_t    end = base + size;
-+    uint32_t    intFlags;
-+
-+    ASSERT_COND(p_MM);
-+
-+    intFlags = XX_LockIntrSpinlock(p_MM->h_Spinlock);
-+
-+    if ( CutBusy( p_MM, base, end ) != E_OK )
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        return (uint64_t)(0);
-+    }
-+
-+    if ( AddFree ( p_MM, base, end ) != E_OK )
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        return (uint64_t)(0);
-+    }
-+
-+    /* Adding the deallocated memory size to free memory size */
-+    p_MM->freeMemSize += size;
-+
-+    XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+
-+    return (size);
-+}
-+
-+/*****************************************************************************/
-+t_Error MM_Add(t_Handle h_MM, uint64_t base, uint64_t size)
-+{
-+    t_MM        *p_MM = (t_MM *)h_MM;
-+    t_MemBlock  *p_MemB, *p_NewMemB;
-+    t_Error     errCode;
-+    uint32_t    intFlags;
-+
-+    ASSERT_COND(p_MM);
-+
-+    /* find a last block in the list of memory blocks to insert a new
-+     * memory block
-+     */
-+    intFlags = XX_LockIntrSpinlock(p_MM->h_Spinlock);
-+
-+    p_MemB = p_MM->memBlocks;
-+    while ( p_MemB->p_Next )
-+    {
-+        if ( base >= p_MemB->base && base < p_MemB->end )
-+        {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+            RETURN_ERROR(MAJOR, E_ALREADY_EXISTS, NO_MSG);
-+        }
-+        p_MemB = p_MemB->p_Next;
-+    }
-+    /* check for a last memory block */
-+    if ( base >= p_MemB->base && base < p_MemB->end )
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        RETURN_ERROR(MAJOR, E_ALREADY_EXISTS, NO_MSG);
-+    }
-+
-+    /* create a new memory block */
-+    if ((p_NewMemB = CreateNewBlock(base, size)) == NULL)
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+    }
-+
-+    /* append a new memory block to the end of the list of memory blocks */
-+    p_MemB->p_Next = p_NewMemB;
-+
-+    /* add a new free block to the free lists */
-+    errCode = AddFree(p_MM, base, base+size);
-+    if (errCode)
-+    {
-+        XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+        p_MemB->p_Next = 0;
-+        XX_Free(p_NewMemB);
-+        return ((t_Error)errCode);
-+    }
-+
-+    /* Adding the new block size to free memory size */
-+    p_MM->freeMemSize += size;
-+
-+    XX_UnlockIntrSpinlock(p_MM->h_Spinlock, intFlags);
-+
-+    return (E_OK);
-+}
-+
-+/*****************************************************************************/
-+uint64_t MM_GetMemBlock(t_Handle h_MM, int index)
-+{
-+    t_MM       *p_MM = (t_MM*)h_MM;
-+    t_MemBlock *p_MemBlock;
-+    int         i;
-+
-+    ASSERT_COND(p_MM);
-+
-+    p_MemBlock = p_MM->memBlocks;
-+    for (i=0; i < index; i++)
-+        p_MemBlock = p_MemBlock->p_Next;
-+
-+    if ( p_MemBlock )
-+        return (p_MemBlock->base);
-+    else
-+        return (uint64_t)ILLEGAL_BASE;
-+}
-+
-+/*****************************************************************************/
-+uint64_t MM_GetBase(t_Handle h_MM)
-+{
-+    t_MM       *p_MM = (t_MM*)h_MM;
-+    t_MemBlock *p_MemBlock;
-+
-+    ASSERT_COND(p_MM);
-+
-+    p_MemBlock = p_MM->memBlocks;
-+    return  p_MemBlock->base;
-+}
-+
-+/*****************************************************************************/
-+bool MM_InRange(t_Handle h_MM, uint64_t addr)
-+{
-+    t_MM       *p_MM = (t_MM*)h_MM;
-+    t_MemBlock *p_MemBlock;
-+
-+    ASSERT_COND(p_MM);
-+
-+    p_MemBlock = p_MM->memBlocks;
-+
-+    if ((addr >= p_MemBlock->base) && (addr < p_MemBlock->end))
-+        return TRUE;
-+    else
-+        return FALSE;
-+}
-+
-+/*****************************************************************************/
-+uint64_t MM_GetFreeMemSize(t_Handle h_MM)
-+{
-+    t_MM       *p_MM = (t_MM*)h_MM;
-+
-+    ASSERT_COND(p_MM);
-+
-+    return p_MM->freeMemSize;
-+}
-+
-+/*****************************************************************************/
-+void MM_Dump(t_Handle h_MM)
-+{
-+    t_MM        *p_MM = (t_MM *)h_MM;
-+    t_FreeBlock *p_FreeB;
-+    t_BusyBlock *p_BusyB;
-+    int          i;
-+
-+    p_BusyB = p_MM->busyBlocks;
-+    XX_Print("List of busy blocks:\n");
-+    while (p_BusyB)
-+    {
-+        XX_Print("\t0x%p: (%s: b=0x%llx, e=0x%llx)\n", p_BusyB, p_BusyB->name, p_BusyB->base, p_BusyB->end );
-+        p_BusyB = p_BusyB->p_Next;
-+    }
-+
-+    XX_Print("\nLists of free blocks according to alignment:\n");
-+    for (i=0; i <= MM_MAX_ALIGNMENT; i++)
-+    {
-+        XX_Print("%d alignment:\n", (0x1 << i));
-+        p_FreeB = p_MM->freeBlocks[i];
-+        while (p_FreeB)
-+        {
-+            XX_Print("\t0x%p: (b=0x%llx, e=0x%llx)\n", p_FreeB, p_FreeB->base, p_FreeB->end);
-+            p_FreeB = p_FreeB->p_Next;
-+        }
-+        XX_Print("\n");
-+    }
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/etc/mm.h
-@@ -0,0 +1,105 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/****************************************************************
-+ *
-+ * File:  mm.h
-+ *
-+ *
-+ * Description:
-+ *  MM (Memory Management) object definitions.
-+ *  It also includes definitions of the Free Block, Busy Block
-+ *  and Memory Block structures used by the MM object.
-+ *
-+ ****************************************************************/
-+
-+#ifndef __MM_H
-+#define __MM_H
-+
-+
-+#include "mm_ext.h"
-+
-+#define __ERR_MODULE__  MODULE_MM
-+
-+
-+#define MAKE_ALIGNED(addr, align)    \
-+    (((uint64_t)(addr) + ((align) - 1)) & (~(((uint64_t)align) - 1)))
-+
-+
-+/* t_MemBlock data structure defines parameters of the Memory Block */
-+typedef struct t_MemBlock
-+{
-+    struct t_MemBlock *p_Next;      /* Pointer to the next memory block */
-+
-+    uint64_t  base;                 /* Base address of the memory block */
-+    uint64_t  end;                  /* End address of the memory block */
-+} t_MemBlock;
-+
-+
-+/* t_FreeBlock data structure defines parameters of the Free Block */
-+typedef struct t_FreeBlock
-+{
-+    struct t_FreeBlock *p_Next;     /* Pointer to the next free block */
-+
-+    uint64_t  base;                 /* Base address of the block */
-+    uint64_t  end;                  /* End address of the block */
-+} t_FreeBlock;
-+
-+
-+/* t_BusyBlock data structure defines parameters of the Busy Block  */
-+typedef struct t_BusyBlock
-+{
-+    struct t_BusyBlock *p_Next;         /* Pointer to the next free block */
-+
-+    uint64_t    base;                   /* Base address of the block */
-+    uint64_t    end;                    /* End address of the block */
-+    char        name[MM_MAX_NAME_LEN];  /* That block of memory was allocated for
-+                                           something specified by the Name */
-+} t_BusyBlock;
-+
-+
-+/* t_MM data structure defines parameters of the MM object */
-+typedef struct t_MM
-+{
-+    t_Handle        h_Spinlock;
-+
-+    t_MemBlock      *memBlocks;     /* List of memory blocks (Memory list) */
-+    t_BusyBlock     *busyBlocks;    /* List of busy blocks (Busy list) */
-+    t_FreeBlock     *freeBlocks[MM_MAX_ALIGNMENT + 1];
-+                                    /* Alignment lists of free blocks (Free lists) */
-+
-+    uint64_t        freeMemSize;    /* Total size of free memory (in bytes) */
-+} t_MM;
-+
-+
-+#endif /* __MM_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/etc/sprint.c
-@@ -0,0 +1,81 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/*------------------------------------------------------*/
-+/* File: sprint.c                                       */
-+/*                                                      */
-+/* Description:                                         */
-+/*    Debug routines (externals)                        */
-+/*------------------------------------------------------*/
-+#include "string_ext.h"
-+#include "stdlib_ext.h"
-+#include "stdarg_ext.h"
-+#include "sprint_ext.h"
-+#include "std_ext.h"
-+#include "xx_ext.h"
-+
-+
-+int Sprint(char * buf, const char *fmt, ...)
-+{
-+    va_list args;
-+    int i;
-+
-+    va_start(args, fmt);
-+    i=vsprintf(buf,fmt,args);
-+    va_end(args);
-+    return i;
-+}
-+
-+int Snprint(char * buf, uint32_t size, const char *fmt, ...)
-+{
-+    va_list args;
-+    int i;
-+
-+    va_start(args, fmt);
-+    i=vsnprintf(buf,size,fmt,args);
-+    va_end(args);
-+    return i;
-+}
-+
-+#ifndef NCSW_VXWORKS
-+int Sscan(const char * buf, const char * fmt, ...)
-+{
-+    va_list args;
-+    int i;
-+
-+    va_start(args,fmt);
-+    i = vsscanf(buf,fmt,args);
-+    va_end(args);
-+    return i;
-+}
-+#endif /* NCSW_VXWORKS */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/fmanv3h_dflags.h
-@@ -0,0 +1,57 @@
-+/*
-+ * Copyright 2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __dflags_h
-+#define __dflags_h
-+
-+
-+#define NCSW_LINUX
-+
-+#define T4240
-+#define NCSW_PPC_CORE
-+
-+#define DEBUG_ERRORS        1
-+
-+#if defined(DEBUG)
-+#define DEBUG_GLOBAL_LEVEL  REPORT_LEVEL_INFO
-+
-+#define DEBUG_XX_MALLOC
-+#define DEBUG_MEM_LEAKS
-+
-+#else
-+#define DEBUG_GLOBAL_LEVEL  REPORT_LEVEL_WARNING
-+#endif /* (DEBUG) */
-+
-+#define REPORT_EVENTS       1
-+#define EVENT_GLOBAL_LEVEL  REPORT_LEVEL_MINOR
-+
-+#endif /* __dflags_h */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/fmanv3l_dflags.h
-@@ -0,0 +1,56 @@
-+/*
-+ * Copyright 2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __dflags_h
-+#define __dflags_h
-+
-+
-+#define NCSW_LINUX
-+
-+#define NCSW_PPC_CORE
-+
-+#define DEBUG_ERRORS        1
-+
-+#if defined(DEBUG)
-+#define DEBUG_GLOBAL_LEVEL  REPORT_LEVEL_INFO
-+
-+#define DEBUG_XX_MALLOC
-+#define DEBUG_MEM_LEAKS
-+
-+#else
-+#define DEBUG_GLOBAL_LEVEL  REPORT_LEVEL_WARNING
-+#endif /* (DEBUG) */
-+
-+#define REPORT_EVENTS       1
-+#define EVENT_GLOBAL_LEVEL  REPORT_LEVEL_MINOR
-+
-+#endif /* __dflags_h */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/crc_mac_addr_ext.h
-@@ -0,0 +1,364 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/*------------------------------------------------------*/
-+/*                                                      */
-+/* File: crc_mac_addr_ext.h                             */
-+/*                                                      */
-+/* Description:                                         */
-+/*    Define a macro that calculate the crc value of    */
-+/*    an Ethernet MAC address (48 bitd address          */
-+/*------------------------------------------------------*/
-+
-+#ifndef __crc_mac_addr_ext_h
-+#define __crc_mac_addr_ext_h
-+
-+#include "std_ext.h"
-+
-+
-+static uint32_t crc_table[256] =
-+{
-+    0x00000000,
-+    0x77073096,
-+    0xee0e612c,
-+    0x990951ba,
-+    0x076dc419,
-+    0x706af48f,
-+    0xe963a535,
-+    0x9e6495a3,
-+    0x0edb8832,
-+    0x79dcb8a4,
-+    0xe0d5e91e,
-+    0x97d2d988,
-+    0x09b64c2b,
-+    0x7eb17cbd,
-+    0xe7b82d07,
-+    0x90bf1d91,
-+    0x1db71064,
-+    0x6ab020f2,
-+    0xf3b97148,
-+    0x84be41de,
-+    0x1adad47d,
-+    0x6ddde4eb,
-+    0xf4d4b551,
-+    0x83d385c7,
-+    0x136c9856,
-+    0x646ba8c0,
-+    0xfd62f97a,
-+    0x8a65c9ec,
-+    0x14015c4f,
-+    0x63066cd9,
-+    0xfa0f3d63,
-+    0x8d080df5,
-+    0x3b6e20c8,
-+    0x4c69105e,
-+    0xd56041e4,
-+    0xa2677172,
-+    0x3c03e4d1,
-+    0x4b04d447,
-+    0xd20d85fd,
-+    0xa50ab56b,
-+    0x35b5a8fa,
-+    0x42b2986c,
-+    0xdbbbc9d6,
-+    0xacbcf940,
-+    0x32d86ce3,
-+    0x45df5c75,
-+    0xdcd60dcf,
-+    0xabd13d59,
-+    0x26d930ac,
-+    0x51de003a,
-+    0xc8d75180,
-+    0xbfd06116,
-+    0x21b4f4b5,
-+    0x56b3c423,
-+    0xcfba9599,
-+    0xb8bda50f,
-+    0x2802b89e,
-+    0x5f058808,
-+    0xc60cd9b2,
-+    0xb10be924,
-+    0x2f6f7c87,
-+    0x58684c11,
-+    0xc1611dab,
-+    0xb6662d3d,
-+    0x76dc4190,
-+    0x01db7106,
-+    0x98d220bc,
-+    0xefd5102a,
-+    0x71b18589,
-+    0x06b6b51f,
-+    0x9fbfe4a5,
-+    0xe8b8d433,
-+    0x7807c9a2,
-+    0x0f00f934,
-+    0x9609a88e,
-+    0xe10e9818,
-+    0x7f6a0dbb,
-+    0x086d3d2d,
-+    0x91646c97,
-+    0xe6635c01,
-+    0x6b6b51f4,
-+    0x1c6c6162,
-+    0x856530d8,
-+    0xf262004e,
-+    0x6c0695ed,
-+    0x1b01a57b,
-+    0x8208f4c1,
-+    0xf50fc457,
-+    0x65b0d9c6,
-+    0x12b7e950,
-+    0x8bbeb8ea,
-+    0xfcb9887c,
-+    0x62dd1ddf,
-+    0x15da2d49,
-+    0x8cd37cf3,
-+    0xfbd44c65,
-+    0x4db26158,
-+    0x3ab551ce,
-+    0xa3bc0074,
-+    0xd4bb30e2,
-+    0x4adfa541,
-+    0x3dd895d7,
-+    0xa4d1c46d,
-+    0xd3d6f4fb,
-+    0x4369e96a,
-+    0x346ed9fc,
-+    0xad678846,
-+    0xda60b8d0,
-+    0x44042d73,
-+    0x33031de5,
-+    0xaa0a4c5f,
-+    0xdd0d7cc9,
-+    0x5005713c,
-+    0x270241aa,
-+    0xbe0b1010,
-+    0xc90c2086,
-+    0x5768b525,
-+    0x206f85b3,
-+    0xb966d409,
-+    0xce61e49f,
-+    0x5edef90e,
-+    0x29d9c998,
-+    0xb0d09822,
-+    0xc7d7a8b4,
-+    0x59b33d17,
-+    0x2eb40d81,
-+    0xb7bd5c3b,
-+    0xc0ba6cad,
-+    0xedb88320,
-+    0x9abfb3b6,
-+    0x03b6e20c,
-+    0x74b1d29a,
-+    0xead54739,
-+    0x9dd277af,
-+    0x04db2615,
-+    0x73dc1683,
-+    0xe3630b12,
-+    0x94643b84,
-+    0x0d6d6a3e,
-+    0x7a6a5aa8,
-+    0xe40ecf0b,
-+    0x9309ff9d,
-+    0x0a00ae27,
-+    0x7d079eb1,
-+    0xf00f9344,
-+    0x8708a3d2,
-+    0x1e01f268,
-+    0x6906c2fe,
-+    0xf762575d,
-+    0x806567cb,
-+    0x196c3671,
-+    0x6e6b06e7,
-+    0xfed41b76,
-+    0x89d32be0,
-+    0x10da7a5a,
-+    0x67dd4acc,
-+    0xf9b9df6f,
-+    0x8ebeeff9,
-+    0x17b7be43,
-+    0x60b08ed5,
-+    0xd6d6a3e8,
-+    0xa1d1937e,
-+    0x38d8c2c4,
-+    0x4fdff252,
-+    0xd1bb67f1,
-+    0xa6bc5767,
-+    0x3fb506dd,
-+    0x48b2364b,
-+    0xd80d2bda,
-+    0xaf0a1b4c,
-+    0x36034af6,
-+    0x41047a60,
-+    0xdf60efc3,
-+    0xa867df55,
-+    0x316e8eef,
-+    0x4669be79,
-+    0xcb61b38c,
-+    0xbc66831a,
-+    0x256fd2a0,
-+    0x5268e236,
-+    0xcc0c7795,
-+    0xbb0b4703,
-+    0x220216b9,
-+    0x5505262f,
-+    0xc5ba3bbe,
-+    0xb2bd0b28,
-+    0x2bb45a92,
-+    0x5cb36a04,
-+    0xc2d7ffa7,
-+    0xb5d0cf31,
-+    0x2cd99e8b,
-+    0x5bdeae1d,
-+    0x9b64c2b0,
-+    0xec63f226,
-+    0x756aa39c,
-+    0x026d930a,
-+    0x9c0906a9,
-+    0xeb0e363f,
-+    0x72076785,
-+    0x05005713,
-+    0x95bf4a82,
-+    0xe2b87a14,
-+    0x7bb12bae,
-+    0x0cb61b38,
-+    0x92d28e9b,
-+    0xe5d5be0d,
-+    0x7cdcefb7,
-+    0x0bdbdf21,
-+    0x86d3d2d4,
-+    0xf1d4e242,
-+    0x68ddb3f8,
-+    0x1fda836e,
-+    0x81be16cd,
-+    0xf6b9265b,
-+    0x6fb077e1,
-+    0x18b74777,
-+    0x88085ae6,
-+    0xff0f6a70,
-+    0x66063bca,
-+    0x11010b5c,
-+    0x8f659eff,
-+    0xf862ae69,
-+    0x616bffd3,
-+    0x166ccf45,
-+    0xa00ae278,
-+    0xd70dd2ee,
-+    0x4e048354,
-+    0x3903b3c2,
-+    0xa7672661,
-+    0xd06016f7,
-+    0x4969474d,
-+    0x3e6e77db,
-+    0xaed16a4a,
-+    0xd9d65adc,
-+    0x40df0b66,
-+    0x37d83bf0,
-+    0xa9bcae53,
-+    0xdebb9ec5,
-+    0x47b2cf7f,
-+    0x30b5ffe9,
-+    0xbdbdf21c,
-+    0xcabac28a,
-+    0x53b39330,
-+    0x24b4a3a6,
-+    0xbad03605,
-+    0xcdd70693,
-+    0x54de5729,
-+    0x23d967bf,
-+    0xb3667a2e,
-+    0xc4614ab8,
-+    0x5d681b02,
-+    0x2a6f2b94,
-+    0xb40bbe37,
-+    0xc30c8ea1,
-+    0x5a05df1b,
-+    0x2d02ef8d
-+};
-+
-+
-+#define GET_MAC_ADDR_CRC(addr, crc)             \
-+{                                               \
-+    uint32_t    i;                              \
-+    uint8_t     data;                           \
-+                                                \
-+    /* CRC calculation */                       \
-+    crc = 0xffffffff;                           \
-+    for (i=0; i < 6; i++)                       \
-+    {                                           \
-+        data = (uint8_t)(addr >> ((5-i)*8));    \
-+        crc = crc^data;                         \
-+        crc = crc_table[crc&0xff] ^ (crc>>8);   \
-+    }                                           \
-+}                                               \
-+
-+/*    Define a macro for getting the mirrored value of      */
-+/*    a byte size number. (0x11010011 --> 0x11001011)       */
-+/*    Sometimes the mirrored value of the CRC is required   */
-+static __inline__ uint8_t GetMirror(uint8_t n)
-+{
-+    uint8_t mirror[16] =
-+        {
-+            0x00,
-+            0x08,
-+            0x04,
-+            0x0c,
-+            0x02,
-+            0x0a,
-+            0x06,
-+            0x0e,
-+            0x01,
-+            0x09,
-+            0x05,
-+            0x0d,
-+            0x03,
-+            0x0b,
-+            0x07,
-+            0x0f
-+        };
-+    return ((uint8_t)(((mirror[n & 0x0f] << 4) | (mirror[n >> 4]))));
-+}
-+
-+static __inline__ uint32_t GetMirror32(uint32_t n)
-+{
-+    return (((uint32_t)GetMirror((uint8_t)(n))<<24) |
-+            ((uint32_t)GetMirror((uint8_t)(n>>8))<<16) |
-+            ((uint32_t)GetMirror((uint8_t)(n>>16))<<8) |
-+            ((uint32_t)GetMirror((uint8_t)(n>>24))));
-+}
-+
-+#define MIRROR      GetMirror
-+#define MIRROR_32   GetMirror32
-+
-+
-+#endif /* __crc_mac_addr_ext_h */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/dpaa_ext.h
-@@ -0,0 +1,210 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          dpaa_ext.h
-+
-+ @Description   DPAA Application Programming Interface.
-+*//***************************************************************************/
-+#ifndef __DPAA_EXT_H
-+#define __DPAA_EXT_H
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         DPAA_grp Data Path Acceleration Architecture API
-+
-+ @Description   DPAA API functions, definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(push,1)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+/**************************************************************************//**
-+ @Description   Frame descriptor
-+*//***************************************************************************/
-+typedef _Packed struct t_DpaaFD {
-+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-+    volatile uint8_t liodn;
-+    volatile uint8_t bpid;
-+    volatile uint8_t elion;
-+    volatile uint8_t addrh;
-+    volatile uint32_t addrl;
-+#else
-+    volatile uint32_t addrl;
-+    volatile uint8_t addrh;
-+    volatile uint8_t elion;
-+    volatile uint8_t bpid;
-+    volatile uint8_t liodn;
-+ #endif
-+    volatile uint32_t    length;            /**< Frame length */
-+    volatile uint32_t    status;            /**< FD status */
-+} _PackedType t_DpaaFD;
-+
-+/**************************************************************************//**
-+ @Description   enum for defining frame format
-+*//***************************************************************************/
-+typedef enum e_DpaaFDFormatType {
-+    e_DPAA_FD_FORMAT_TYPE_SHORT_SBSF  = 0x0,   /**< Simple frame Single buffer; Offset and
-+                                                    small length (9b OFFSET, 20b LENGTH) */
-+    e_DPAA_FD_FORMAT_TYPE_LONG_SBSF   = 0x2,   /**< Simple frame, single buffer; big length
-+                                                    (29b LENGTH ,No OFFSET) */
-+    e_DPAA_FD_FORMAT_TYPE_SHORT_MBSF  = 0x4,   /**< Simple frame, Scatter Gather table; Offset
-+                                                    and small length (9b OFFSET, 20b LENGTH) */
-+    e_DPAA_FD_FORMAT_TYPE_LONG_MBSF   = 0x6,   /**< Simple frame, Scatter Gather table;
-+                                                    big length (29b LENGTH ,No OFFSET) */
-+    e_DPAA_FD_FORMAT_TYPE_COMPOUND    = 0x1,   /**< Compound Frame (29b CONGESTION-WEIGHT
-+                                                    No LENGTH or OFFSET) */
-+    e_DPAA_FD_FORMAT_TYPE_DUMMY
-+} e_DpaaFDFormatType;
-+
-+/**************************************************************************//**
-+ @Collection   Frame descriptor macros
-+*//***************************************************************************/
-+#define DPAA_FD_DD_MASK       0xc0000000           /**< FD DD field mask */
-+#define DPAA_FD_PID_MASK      0x3f000000           /**< FD PID field mask */
-+#define DPAA_FD_ELIODN_MASK   0x0000f000           /**< FD ELIODN field mask */
-+#define DPAA_FD_BPID_MASK     0x00ff0000           /**< FD BPID field mask */
-+#define DPAA_FD_ADDRH_MASK    0x000000ff           /**< FD ADDRH field mask */
-+#define DPAA_FD_ADDRL_MASK    0xffffffff           /**< FD ADDRL field mask */
-+#define DPAA_FD_FORMAT_MASK   0xe0000000           /**< FD FORMAT field mask */
-+#define DPAA_FD_OFFSET_MASK   0x1ff00000           /**< FD OFFSET field mask */
-+#define DPAA_FD_LENGTH_MASK   0x000fffff           /**< FD LENGTH field mask */
-+
-+#define DPAA_FD_GET_ADDRH(fd)         ((t_DpaaFD *)fd)->addrh                       /**< Macro to get FD ADDRH field */
-+#define DPAA_FD_GET_ADDRL(fd)         ((t_DpaaFD *)fd)->addrl                                           /**< Macro to get FD ADDRL field */
-+#define DPAA_FD_GET_PHYS_ADDR(fd)     ((physAddress_t)(((uint64_t)DPAA_FD_GET_ADDRH(fd) << 32) | (uint64_t)DPAA_FD_GET_ADDRL(fd))) /**< Macro to get FD ADDR field */
-+#define DPAA_FD_GET_FORMAT(fd)        ((((t_DpaaFD *)fd)->length & DPAA_FD_FORMAT_MASK) >> (31-2))      /**< Macro to get FD FORMAT field */
-+#define DPAA_FD_GET_OFFSET(fd)        ((((t_DpaaFD *)fd)->length & DPAA_FD_OFFSET_MASK) >> (31-11))     /**< Macro to get FD OFFSET field */
-+#define DPAA_FD_GET_LENGTH(fd)        (((t_DpaaFD *)fd)->length & DPAA_FD_LENGTH_MASK)                  /**< Macro to get FD LENGTH field */
-+#define DPAA_FD_GET_STATUS(fd)        ((t_DpaaFD *)fd)->status                                          /**< Macro to get FD STATUS field */
-+#define DPAA_FD_GET_ADDR(fd)          XX_PhysToVirt(DPAA_FD_GET_PHYS_ADDR(fd))                          /**< Macro to get FD ADDR (virtual) */
-+
-+#define DPAA_FD_SET_ADDRH(fd,val)     ((t_DpaaFD *)fd)->addrh = (val)            /**< Macro to set FD ADDRH field */
-+#define DPAA_FD_SET_ADDRL(fd,val)     ((t_DpaaFD *)fd)->addrl = (val)                                   /**< Macro to set FD ADDRL field */
-+#define DPAA_FD_SET_ADDR(fd,val)                            \
-+do {                                                        \
-+    uint64_t physAddr = (uint64_t)(XX_VirtToPhys(val));     \
-+    DPAA_FD_SET_ADDRH(fd, ((uint32_t)(physAddr >> 32)));    \
-+    DPAA_FD_SET_ADDRL(fd, (uint32_t)physAddr);              \
-+} while (0)                                                                                             /**< Macro to set FD ADDR field */
-+#define DPAA_FD_SET_FORMAT(fd,val)    (((t_DpaaFD *)fd)->length = ((((t_DpaaFD *)fd)->length & ~DPAA_FD_FORMAT_MASK) | (((val)  << (31-2))& DPAA_FD_FORMAT_MASK)))  /**< Macro to set FD FORMAT field */
-+#define DPAA_FD_SET_OFFSET(fd,val)    (((t_DpaaFD *)fd)->length = ((((t_DpaaFD *)fd)->length & ~DPAA_FD_OFFSET_MASK) | (((val) << (31-11))& DPAA_FD_OFFSET_MASK) )) /**< Macro to set FD OFFSET field */
-+#define DPAA_FD_SET_LENGTH(fd,val)    (((t_DpaaFD *)fd)->length = (((t_DpaaFD *)fd)->length & ~DPAA_FD_LENGTH_MASK) | ((val) & DPAA_FD_LENGTH_MASK))                /**< Macro to set FD LENGTH field */
-+#define DPAA_FD_SET_STATUS(fd,val)    ((t_DpaaFD *)fd)->status = (val)                                  /**< Macro to set FD STATUS field */
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Description   Frame Scatter/Gather Table Entry
-+*//***************************************************************************/
-+typedef _Packed struct t_DpaaSGTE {
-+    volatile uint32_t    addrh;        /**< Buffer Address high */
-+    volatile uint32_t    addrl;        /**< Buffer Address low */
-+    volatile uint32_t    length;       /**< Buffer length */
-+    volatile uint32_t    offset;       /**< SGTE offset */
-+} _PackedType t_DpaaSGTE;
-+
-+#define DPAA_NUM_OF_SG_TABLE_ENTRY 16
-+
-+/**************************************************************************//**
-+ @Description   Frame Scatter/Gather Table
-+*//***************************************************************************/
-+typedef _Packed struct t_DpaaSGT {
-+    t_DpaaSGTE    tableEntry[DPAA_NUM_OF_SG_TABLE_ENTRY];
-+                                    /**< Structure that holds information about
-+                                         a single S/G entry. */
-+} _PackedType t_DpaaSGT;
-+
-+/**************************************************************************//**
-+ @Description   Compound Frame Table
-+*//***************************************************************************/
-+typedef _Packed struct t_DpaaCompTbl {
-+    t_DpaaSGTE    outputBuffInfo;   /**< Structure that holds information about
-+                                         the compound-frame output buffer;
-+                                         NOTE: this may point to a S/G table */
-+    t_DpaaSGTE    inputBuffInfo;    /**< Structure that holds information about
-+                                         the compound-frame input buffer;
-+                                         NOTE: this may point to a S/G table */
-+} _PackedType t_DpaaCompTbl;
-+
-+/**************************************************************************//**
-+ @Collection   Frame Scatter/Gather Table Entry macros
-+*//***************************************************************************/
-+#define DPAA_SGTE_ADDRH_MASK    0x000000ff           /**< SGTE ADDRH field mask */
-+#define DPAA_SGTE_ADDRL_MASK    0xffffffff           /**< SGTE ADDRL field mask */
-+#define DPAA_SGTE_E_MASK        0x80000000           /**< SGTE Extension field mask */
-+#define DPAA_SGTE_F_MASK        0x40000000           /**< SGTE Final field mask */
-+#define DPAA_SGTE_LENGTH_MASK   0x3fffffff           /**< SGTE LENGTH field mask */
-+#define DPAA_SGTE_BPID_MASK     0x00ff0000           /**< SGTE BPID field mask */
-+#define DPAA_SGTE_OFFSET_MASK   0x00001fff           /**< SGTE OFFSET field mask */
-+
-+#define DPAA_SGTE_GET_ADDRH(sgte)         (((t_DpaaSGTE *)sgte)->addrh & DPAA_SGTE_ADDRH_MASK)              /**< Macro to get SGTE ADDRH field */
-+#define DPAA_SGTE_GET_ADDRL(sgte)         ((t_DpaaSGTE *)sgte)->addrl                                       /**< Macro to get SGTE ADDRL field */
-+#define DPAA_SGTE_GET_PHYS_ADDR(sgte)     ((physAddress_t)(((uint64_t)DPAA_SGTE_GET_ADDRH(sgte) << 32) | (uint64_t)DPAA_SGTE_GET_ADDRL(sgte))) /**< Macro to get FD ADDR field */
-+#define DPAA_SGTE_GET_EXTENSION(sgte)     ((((t_DpaaSGTE *)sgte)->length & DPAA_SGTE_E_MASK) >> (31-0))     /**< Macro to get SGTE EXTENSION field */
-+#define DPAA_SGTE_GET_FINAL(sgte)         ((((t_DpaaSGTE *)sgte)->length & DPAA_SGTE_F_MASK) >> (31-1))     /**< Macro to get SGTE FINAL field */
-+#define DPAA_SGTE_GET_LENGTH(sgte)        (((t_DpaaSGTE *)sgte)->length & DPAA_SGTE_LENGTH_MASK)            /**< Macro to get SGTE LENGTH field */
-+#define DPAA_SGTE_GET_BPID(sgte)          ((((t_DpaaSGTE *)sgte)->offset & DPAA_SGTE_BPID_MASK) >> (31-15)) /**< Macro to get SGTE BPID field */
-+#define DPAA_SGTE_GET_OFFSET(sgte)        (((t_DpaaSGTE *)sgte)->offset & DPAA_SGTE_OFFSET_MASK)            /**< Macro to get SGTE OFFSET field */
-+#define DPAA_SGTE_GET_ADDR(sgte)          XX_PhysToVirt(DPAA_SGTE_GET_PHYS_ADDR(sgte))
-+
-+#define DPAA_SGTE_SET_ADDRH(sgte,val)     (((t_DpaaSGTE *)sgte)->addrh = ((((t_DpaaSGTE *)sgte)->addrh & ~DPAA_SGTE_ADDRH_MASK) | ((val) & DPAA_SGTE_ADDRH_MASK))) /**< Macro to set SGTE ADDRH field */
-+#define DPAA_SGTE_SET_ADDRL(sgte,val)     ((t_DpaaSGTE *)sgte)->addrl = (val)                                 /**< Macro to set SGTE ADDRL field */
-+#define DPAA_SGTE_SET_ADDR(sgte,val)                            \
-+do {                                                            \
-+    uint64_t physAddr = (uint64_t)(XX_VirtToPhys(val));         \
-+    DPAA_SGTE_SET_ADDRH(sgte, ((uint32_t)(physAddr >> 32)));    \
-+    DPAA_SGTE_SET_ADDRL(sgte, (uint32_t)physAddr);              \
-+} while (0)                                                                                                 /**< Macro to set SGTE ADDR field */
-+#define DPAA_SGTE_SET_EXTENSION(sgte,val) (((t_DpaaSGTE *)sgte)->length = ((((t_DpaaSGTE *)sgte)->length & ~DPAA_SGTE_E_MASK) | (((val)  << (31-0))& DPAA_SGTE_E_MASK)))            /**< Macro to set SGTE EXTENSION field */
-+#define DPAA_SGTE_SET_FINAL(sgte,val)     (((t_DpaaSGTE *)sgte)->length = ((((t_DpaaSGTE *)sgte)->length & ~DPAA_SGTE_F_MASK) | (((val)  << (31-1))& DPAA_SGTE_F_MASK)))            /**< Macro to set SGTE FINAL field */
-+#define DPAA_SGTE_SET_LENGTH(sgte,val)    (((t_DpaaSGTE *)sgte)->length = (((t_DpaaSGTE *)sgte)->length & ~DPAA_SGTE_LENGTH_MASK) | ((val) & DPAA_SGTE_LENGTH_MASK))                /**< Macro to set SGTE LENGTH field */
-+#define DPAA_SGTE_SET_BPID(sgte,val)      (((t_DpaaSGTE *)sgte)->offset = ((((t_DpaaSGTE *)sgte)->offset & ~DPAA_SGTE_BPID_MASK) | (((val)  << (31-15))& DPAA_SGTE_BPID_MASK)))     /**< Macro to set SGTE BPID field */
-+#define DPAA_SGTE_SET_OFFSET(sgte,val)    (((t_DpaaSGTE *)sgte)->offset = ((((t_DpaaSGTE *)sgte)->offset & ~DPAA_SGTE_OFFSET_MASK) | (((val) << (31-31))& DPAA_SGTE_OFFSET_MASK) )) /**< Macro to set SGTE OFFSET field */
-+/* @} */
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+#define DPAA_LIODN_DONT_OVERRIDE    (-1)
-+
-+/** @} */ /* end of DPAA_grp group */
-+
-+
-+#endif /* __DPAA_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_ext.h
-@@ -0,0 +1,1731 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          fm_ext.h
-+
-+ @Description   FM Application Programming Interface.
-+*//***************************************************************************/
-+#ifndef __FM_EXT
-+#define __FM_EXT
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+#include "dpaa_ext.h"
-+#include "fsl_fman_sp.h"
-+
-+/**************************************************************************//**
-+ @Group         FM_grp Frame Manager API
-+
-+ @Description   FM API functions, definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         FM_lib_grp FM library
-+
-+ @Description   FM API functions, definitions and enums.
-+
-+                The FM module is the main driver module and is a mandatory module
-+                for FM driver users. This module must be initialized first prior
-+                to any other drivers modules.
-+                The FM is a "singleton" module. It is responsible of the common
-+                HW modules: FPM, DMA, common QMI and common BMI initializations and
-+                run-time control routines. This module must be initialized always
-+                when working with any of the FM modules.
-+                NOTE - We assume that the FM library will be initialized only by core No. 0!
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   Enum for defining port types
-+*//***************************************************************************/
-+typedef enum e_FmPortType {
-+    e_FM_PORT_TYPE_OH_OFFLINE_PARSING = 0,  /**< Offline parsing port */
-+    e_FM_PORT_TYPE_RX,                      /**< 1G Rx port */
-+    e_FM_PORT_TYPE_RX_10G,                  /**< 10G Rx port */
-+    e_FM_PORT_TYPE_TX,                      /**< 1G Tx port */
-+    e_FM_PORT_TYPE_TX_10G,                  /**< 10G Tx port */
-+    e_FM_PORT_TYPE_DUMMY
-+} e_FmPortType;
-+
-+/**************************************************************************//**
-+ @Collection    General FM defines
-+*//***************************************************************************/
-+#define FM_MAX_NUM_OF_PARTITIONS    64      /**< Maximum number of partitions */
-+#define FM_PHYS_ADDRESS_SIZE        6       /**< FM Physical address size */
-+/* @} */
-+
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(push,1)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+/**************************************************************************//**
-+ @Description   FM physical Address
-+*//***************************************************************************/
-+typedef _Packed struct t_FmPhysAddr {
-+    volatile uint8_t    high;         /**< High part of the physical address */
-+    volatile uint32_t   low;          /**< Low part of the physical address */
-+} _PackedType t_FmPhysAddr;
-+
-+/**************************************************************************//**
-+ @Description   Parse results memory layout
-+*//***************************************************************************/
-+typedef _Packed struct t_FmPrsResult {
-+    volatile uint8_t     lpid;               /**< Logical port id */
-+    volatile uint8_t     shimr;              /**< Shim header result  */
-+    volatile uint16_t    l2r;                /**< Layer 2 result */
-+    volatile uint16_t    l3r;                /**< Layer 3 result */
-+    volatile uint8_t     l4r;                /**< Layer 4 result */
-+    volatile uint8_t     cplan;              /**< Classification plan id */
-+    volatile uint16_t    nxthdr;             /**< Next Header  */
-+    volatile uint16_t    cksum;              /**< Running-sum */
-+    volatile uint16_t    flags_frag_off;     /**< Flags & fragment-offset field of the last IP-header */
-+    volatile uint8_t     route_type;         /**< Routing type field of a IPv6 routing extension header */
-+    volatile uint8_t     rhp_ip_valid;       /**< Routing Extension Header Present; last bit is IP valid */
-+    volatile uint8_t     shim_off[2];        /**< Shim offset */
-+    volatile uint8_t     ip_pid_off;         /**< IP PID (last IP-proto) offset */
-+    volatile uint8_t     eth_off;            /**< ETH offset */
-+    volatile uint8_t     llc_snap_off;       /**< LLC_SNAP offset */
-+    volatile uint8_t     vlan_off[2];        /**< VLAN offset */
-+    volatile uint8_t     etype_off;          /**< ETYPE offset */
-+    volatile uint8_t     pppoe_off;          /**< PPP offset */
-+    volatile uint8_t     mpls_off[2];        /**< MPLS offset */
-+    volatile uint8_t     ip_off[2];          /**< IP offset */
-+    volatile uint8_t     gre_off;            /**< GRE offset */
-+    volatile uint8_t     l4_off;             /**< Layer 4 offset */
-+    volatile uint8_t     nxthdr_off;         /**< Parser end point */
-+} _PackedType t_FmPrsResult;
-+
-+/**************************************************************************//**
-+ @Collection   FM Parser results
-+*//***************************************************************************/
-+#define FM_PR_L2_VLAN_STACK         0x00000100  /**< Parse Result: VLAN stack */
-+#define FM_PR_L2_ETHERNET           0x00008000  /**< Parse Result: Ethernet*/
-+#define FM_PR_L2_VLAN               0x00004000  /**< Parse Result: VLAN */
-+#define FM_PR_L2_LLC_SNAP           0x00002000  /**< Parse Result: LLC_SNAP */
-+#define FM_PR_L2_MPLS               0x00001000  /**< Parse Result: MPLS */
-+#define FM_PR_L2_PPPoE              0x00000800  /**< Parse Result: PPPoE */
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Collection   FM Frame descriptor macros
-+*//***************************************************************************/
-+#define FM_FD_CMD_FCO                   0x80000000  /**< Frame queue Context Override */
-+#define FM_FD_CMD_RPD                   0x40000000  /**< Read Prepended Data */
-+#define FM_FD_CMD_UPD                   0x20000000  /**< Update Prepended Data */
-+#define FM_FD_CMD_DTC                   0x10000000  /**< Do L4 Checksum */
-+#define FM_FD_CMD_DCL4C                 0x10000000  /**< Didn't calculate L4 Checksum */
-+#define FM_FD_CMD_CFQ                   0x00ffffff  /**< Confirmation Frame Queue */
-+
-+#define FM_FD_ERR_UNSUPPORTED_FORMAT    0x04000000  /**< Not for Rx-Port! Unsupported Format */
-+#define FM_FD_ERR_LENGTH                0x02000000  /**< Not for Rx-Port! Length Error */
-+#define FM_FD_ERR_DMA                   0x01000000  /**< DMA Data error */
-+
-+#define FM_FD_IPR                       0x00000001  /**< IPR frame (not error) */
-+
-+#define FM_FD_ERR_IPR_NCSP              (0x00100000 | FM_FD_IPR)    /**< IPR non-consistent-sp */
-+#define FM_FD_ERR_IPR                   (0x00200000 | FM_FD_IPR)    /**< IPR error */
-+#define FM_FD_ERR_IPR_TO                (0x00300000 | FM_FD_IPR)    /**< IPR timeout */
-+
-+#ifdef FM_CAPWAP_SUPPORT
-+#define FM_FD_ERR_CRE                   0x00200000
-+#define FM_FD_ERR_CHE                   0x00100000
-+#endif /* FM_CAPWAP_SUPPORT */
-+
-+#define FM_FD_ERR_PHYSICAL              0x00080000  /**< Rx FIFO overflow, FCS error, code error, running disparity
-+                                                         error (SGMII and TBI modes), FIFO parity error. PHY
-+                                                         Sequence error, PHY error control character detected. */
-+#define FM_FD_ERR_SIZE                  0x00040000  /**< Frame too long OR Frame size exceeds max_length_frame  */
-+#define FM_FD_ERR_CLS_DISCARD           0x00020000  /**< classification discard */
-+#define FM_FD_ERR_EXTRACTION            0x00008000  /**< Extract Out of Frame */
-+#define FM_FD_ERR_NO_SCHEME             0x00004000  /**< No Scheme Selected */
-+#define FM_FD_ERR_KEYSIZE_OVERFLOW      0x00002000  /**< Keysize Overflow */
-+#define FM_FD_ERR_COLOR_RED             0x00000800  /**< Frame color is red */
-+#define FM_FD_ERR_COLOR_YELLOW          0x00000400  /**< Frame color is yellow */
-+#define FM_FD_ERR_ILL_PLCR              0x00000200  /**< Illegal Policer Profile selected */
-+#define FM_FD_ERR_PLCR_FRAME_LEN        0x00000100  /**< Policer frame length error */
-+#define FM_FD_ERR_PRS_TIMEOUT           0x00000080  /**< Parser Time out Exceed */
-+#define FM_FD_ERR_PRS_ILL_INSTRUCT      0x00000040  /**< Invalid Soft Parser instruction */
-+#define FM_FD_ERR_PRS_HDR_ERR           0x00000020  /**< Header error was identified during parsing */
-+#define FM_FD_ERR_BLOCK_LIMIT_EXCEEDED  0x00000008  /**< Frame parsed beyind 256 first bytes */
-+
-+#define FM_FD_TX_STATUS_ERR_MASK        (FM_FD_ERR_UNSUPPORTED_FORMAT   | \
-+                                         FM_FD_ERR_LENGTH               | \
-+                                         FM_FD_ERR_DMA) /**< TX Error FD bits */
-+
-+#define FM_FD_RX_STATUS_ERR_MASK        (FM_FD_ERR_UNSUPPORTED_FORMAT   | \
-+                                         FM_FD_ERR_LENGTH               | \
-+                                         FM_FD_ERR_DMA                  | \
-+                                         FM_FD_ERR_IPR                  | \
-+                                         FM_FD_ERR_IPR_TO               | \
-+                                         FM_FD_ERR_IPR_NCSP             | \
-+                                         FM_FD_ERR_PHYSICAL             | \
-+                                         FM_FD_ERR_SIZE                 | \
-+                                         FM_FD_ERR_CLS_DISCARD          | \
-+                                         FM_FD_ERR_COLOR_RED            | \
-+                                         FM_FD_ERR_COLOR_YELLOW         | \
-+                                         FM_FD_ERR_ILL_PLCR             | \
-+                                         FM_FD_ERR_PLCR_FRAME_LEN       | \
-+                                         FM_FD_ERR_EXTRACTION           | \
-+                                         FM_FD_ERR_NO_SCHEME            | \
-+                                         FM_FD_ERR_KEYSIZE_OVERFLOW     | \
-+                                         FM_FD_ERR_PRS_TIMEOUT          | \
-+                                         FM_FD_ERR_PRS_ILL_INSTRUCT     | \
-+                                         FM_FD_ERR_PRS_HDR_ERR          | \
-+                                         FM_FD_ERR_BLOCK_LIMIT_EXCEEDED) /**< RX Error FD bits */
-+
-+#define FM_FD_RX_STATUS_ERR_NON_FM      0x00400000  /**< non Frame-Manager error */
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Description   Context A
-+*//***************************************************************************/
-+typedef _Packed struct t_FmContextA {
-+    volatile uint32_t    command;   /**< ContextA Command */
-+    volatile uint8_t     res0[4];   /**< ContextA Reserved bits */
-+} _PackedType t_FmContextA;
-+
-+/**************************************************************************//**
-+ @Description   Context B
-+*//***************************************************************************/
-+typedef uint32_t t_FmContextB;
-+
-+/**************************************************************************//**
-+ @Collection   Special Operation options
-+*//***************************************************************************/
-+typedef uint32_t fmSpecialOperations_t;                 /**< typedef for defining Special Operation options */
-+
-+#define  FM_SP_OP_IPSEC                     0x80000000  /**< activate features that related to IPSec (e.g fix Eth-type) */
-+#define  FM_SP_OP_IPSEC_UPDATE_UDP_LEN      0x40000000  /**< update the UDP-Len after Encryption */
-+#define  FM_SP_OP_IPSEC_MANIP               0x20000000  /**< handle the IPSec-manip options */
-+#define  FM_SP_OP_RPD                       0x10000000  /**< Set the RPD bit */
-+#define  FM_SP_OP_DCL4C                     0x08000000  /**< Set the DCL4C bit */
-+#define  FM_SP_OP_CHECK_SEC_ERRORS          0x04000000  /**< Check SEC errors */
-+#define  FM_SP_OP_CLEAR_RPD                 0x02000000  /**< Clear the RPD bit */
-+#define  FM_SP_OP_CAPWAP_DTLS_ENC           0x01000000  /**< activate features that related to CAPWAP-DTLS post Encryption */
-+#define  FM_SP_OP_CAPWAP_DTLS_DEC           0x00800000  /**< activate features that related to CAPWAP-DTLS post Decryption */
-+#define  FM_SP_OP_IPSEC_NO_ETH_HDR          0x00400000  /**< activate features that related to IPSec without Eth hdr */
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Collection   Context A macros
-+*//***************************************************************************/
-+#define FM_CONTEXTA_OVERRIDE_MASK       0x80000000
-+#define FM_CONTEXTA_ICMD_MASK           0x40000000
-+#define FM_CONTEXTA_A1_VALID_MASK       0x20000000
-+#define FM_CONTEXTA_MACCMD_MASK         0x00ff0000
-+#define FM_CONTEXTA_MACCMD_VALID_MASK   0x00800000
-+#define FM_CONTEXTA_MACCMD_SECURED_MASK 0x00100000
-+#define FM_CONTEXTA_MACCMD_SC_MASK      0x000f0000
-+#define FM_CONTEXTA_A1_MASK             0x0000ffff
-+
-+#define FM_CONTEXTA_GET_OVERRIDE(contextA)                 ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_OVERRIDE_MASK) >> (31-0))
-+#define FM_CONTEXTA_GET_ICMD(contextA)                     ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_ICMD_MASK) >> (31-1))
-+#define FM_CONTEXTA_GET_A1_VALID(contextA)                 ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_A1_VALID_MASK) >> (31-2))
-+#define FM_CONTEXTA_GET_A1(contextA)                       ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_A1_MASK) >> (31-31))
-+#define FM_CONTEXTA_GET_MACCMD(contextA)                   ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_MACCMD_MASK) >> (31-15))
-+#define FM_CONTEXTA_GET_MACCMD_VALID(contextA)             ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_MACCMD_VALID_MASK) >> (31-8))
-+#define FM_CONTEXTA_GET_MACCMD_SECURED(contextA)           ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_MACCMD_SECURED_MASK) >> (31-11))
-+#define FM_CONTEXTA_GET_MACCMD_SECURE_CHANNEL(contextA)    ((((t_FmContextA *)contextA)->command & FM_CONTEXTA_MACCMD_SC_MASK) >> (31-15))
-+
-+#define FM_CONTEXTA_SET_OVERRIDE(contextA,val)              (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_OVERRIDE_MASK) | (((uint32_t)(val) << (31-0)) & FM_CONTEXTA_OVERRIDE_MASK) ))
-+#define FM_CONTEXTA_SET_ICMD(contextA,val)                  (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_ICMD_MASK) | (((val) << (31-1)) & FM_CONTEXTA_ICMD_MASK) ))
-+#define FM_CONTEXTA_SET_A1_VALID(contextA,val)              (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_A1_VALID_MASK) | (((val) << (31-2)) & FM_CONTEXTA_A1_VALID_MASK) ))
-+#define FM_CONTEXTA_SET_A1(contextA,val)                    (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_A1_MASK) | (((val) << (31-31)) & FM_CONTEXTA_A1_MASK) ))
-+#define FM_CONTEXTA_SET_MACCMD(contextA,val)                (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_MACCMD_MASK) | (((val) << (31-15)) & FM_CONTEXTA_MACCMD_MASK) ))
-+#define FM_CONTEXTA_SET_MACCMD_VALID(contextA,val)          (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_MACCMD_VALID_MASK) | (((val) << (31-8)) & FM_CONTEXTA_MACCMD_VALID_MASK) ))
-+#define FM_CONTEXTA_SET_MACCMD_SECURED(contextA,val)        (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_MACCMD_SECURED_MASK) | (((val) << (31-11)) & FM_CONTEXTA_MACCMD_SECURED_MASK) ))
-+#define FM_CONTEXTA_SET_MACCMD_SECURE_CHANNEL(contextA,val) (((t_FmContextA *)contextA)->command = (uint32_t)((((t_FmContextA *)contextA)->command & ~FM_CONTEXTA_MACCMD_SC_MASK) | (((val) << (31-15)) & FM_CONTEXTA_MACCMD_SC_MASK) ))
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Collection   Context B macros
-+*//***************************************************************************/
-+#define FM_CONTEXTB_FQID_MASK               0x00ffffff
-+
-+#define FM_CONTEXTB_GET_FQID(contextB)      (*((t_FmContextB *)contextB) & FM_CONTEXTB_FQID_MASK)
-+#define FM_CONTEXTB_SET_FQID(contextB,val)  (*((t_FmContextB *)contextB) = ((*((t_FmContextB *)contextB) & ~FM_CONTEXTB_FQID_MASK) | ((val) & FM_CONTEXTB_FQID_MASK)))
-+/* @} */
-+
-+#if defined(__MWERKS__) && !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif /* defined(__MWERKS__) && ... */
-+
-+
-+/**************************************************************************//**
-+ @Description   FM Exceptions
-+*//***************************************************************************/
-+typedef enum e_FmExceptions {
-+    e_FM_EX_DMA_BUS_ERROR = 0,          /**< DMA bus error. */
-+    e_FM_EX_DMA_READ_ECC,               /**< Read Buffer ECC error (Valid for FM rev < 6)*/
-+    e_FM_EX_DMA_SYSTEM_WRITE_ECC,       /**< Write Buffer ECC error on system side (Valid for FM rev < 6)*/
-+    e_FM_EX_DMA_FM_WRITE_ECC,           /**< Write Buffer ECC error on FM side (Valid for FM rev < 6)*/
-+    e_FM_EX_DMA_SINGLE_PORT_ECC,        /**< Single Port ECC error on FM side (Valid for FM rev > 6)*/
-+    e_FM_EX_FPM_STALL_ON_TASKS,         /**< Stall of tasks on FPM */
-+    e_FM_EX_FPM_SINGLE_ECC,             /**< Single ECC on FPM. */
-+    e_FM_EX_FPM_DOUBLE_ECC,             /**< Double ECC error on FPM ram access */
-+    e_FM_EX_QMI_SINGLE_ECC,             /**< Single ECC on QMI. */
-+    e_FM_EX_QMI_DOUBLE_ECC,             /**< Double bit ECC occurred on QMI */
-+    e_FM_EX_QMI_DEQ_FROM_UNKNOWN_PORTID,/**< Dequeue from unknown port id */
-+    e_FM_EX_BMI_LIST_RAM_ECC,           /**< Linked List RAM ECC error */
-+    e_FM_EX_BMI_STORAGE_PROFILE_ECC,    /**< Storage Profile ECC Error */
-+    e_FM_EX_BMI_STATISTICS_RAM_ECC,     /**< Statistics Count RAM ECC Error Enable */
-+    e_FM_EX_BMI_DISPATCH_RAM_ECC,       /**< Dispatch RAM ECC Error Enable */
-+    e_FM_EX_IRAM_ECC,                   /**< Double bit ECC occurred on IRAM*/
-+    e_FM_EX_MURAM_ECC                   /**< Double bit ECC occurred on MURAM*/
-+} e_FmExceptions;
-+
-+/**************************************************************************//**
-+ @Description   Enum for defining port DMA swap mode
-+*//***************************************************************************/
-+typedef enum e_FmDmaSwapOption {
-+    e_FM_DMA_NO_SWP = FMAN_DMA_NO_SWP,          /**< No swap, transfer data as is.*/
-+    e_FM_DMA_SWP_PPC_LE = FMAN_DMA_SWP_PPC_LE,  /**< The transferred data should be swapped
-+                                                in PowerPc Little Endian mode. */
-+    e_FM_DMA_SWP_BE = FMAN_DMA_SWP_BE           /**< The transferred data should be swapped
-+                                                in Big Endian mode */
-+} e_FmDmaSwapOption;
-+
-+/**************************************************************************//**
-+ @Description   Enum for defining port DMA cache attributes
-+*//***************************************************************************/
-+typedef enum e_FmDmaCacheOption {
-+    e_FM_DMA_NO_STASH = FMAN_DMA_NO_STASH,      /**< Cacheable, no Allocate (No Stashing) */
-+    e_FM_DMA_STASH = FMAN_DMA_STASH             /**< Cacheable and Allocate (Stashing on) */
-+} e_FmDmaCacheOption;
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_init_grp FM Initialization Unit
-+
-+ @Description   FM Initialization Unit
-+
-+                Initialization Flow
-+                Initialization of the FM Module will be carried out by the application
-+                according to the following sequence:
-+                -  Calling the configuration routine with basic parameters.
-+                -  Calling the advance initialization routines to change driver's defaults.
-+                -  Calling the initialization routine.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      t_FmExceptionsCallback
-+
-+ @Description   Exceptions user callback routine, will be called upon an
-+                exception passing the exception identification.
-+
-+ @Param[in]     h_App      - User's application descriptor.
-+ @Param[in]     exception  - The exception.
-+*//***************************************************************************/
-+typedef void (t_FmExceptionsCallback)(t_Handle          h_App,
-+                                      e_FmExceptions    exception);
-+
-+
-+/**************************************************************************//**
-+ @Function      t_FmBusErrorCallback
-+
-+ @Description   Bus error user callback routine, will be called upon a
-+                bus error, passing parameters describing the errors and the owner.
-+
-+ @Param[in]     h_App       - User's application descriptor.
-+ @Param[in]     portType    - Port type (e_FmPortType)
-+ @Param[in]     portId      - Port id - relative to type.
-+ @Param[in]     addr        - Address that caused the error
-+ @Param[in]     tnum        - Owner of error
-+ @Param[in]     liodn       - Logical IO device number
-+*//***************************************************************************/
-+typedef void (t_FmBusErrorCallback) (t_Handle        h_App,
-+                                     e_FmPortType    portType,
-+                                     uint8_t         portId,
-+                                     uint64_t        addr,
-+                                     uint8_t         tnum,
-+                                     uint16_t        liodn);
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining buffer prefix area content.
-+*//***************************************************************************/
-+typedef struct t_FmBufferPrefixContent {
-+    uint16_t    privDataSize;       /**< Number of bytes to be left at the beginning
-+                                         of the external buffer; Note that the private-area will
-+                                         start from the base of the buffer address. */
-+    bool        passPrsResult;      /**< TRUE to pass the parse result to/from the FM;
-+                                         User may use FM_PORT_GetBufferPrsResult() in order to
-+                                         get the parser-result from a buffer. */
-+    bool        passTimeStamp;      /**< TRUE to pass the timeStamp to/from the FM
-+                                         User may use FM_PORT_GetBufferTimeStamp() in order to
-+                                         get the parser-result from a buffer. */
-+    bool        passHashResult;     /**< TRUE to pass the KG hash result to/from the FM
-+                                         User may use FM_PORT_GetBufferHashResult() in order to
-+                                         get the parser-result from a buffer. */
-+    bool        passAllOtherPCDInfo;/**< Add all other Internal-Context information:
-+                                         AD, hash-result, key, etc. */
-+    uint16_t    dataAlign;          /**< 0 to use driver's default alignment [DEFAULT_FM_SP_bufferPrefixContent_dataAlign],
-+                                         other value for selecting a data alignment (must be a power of 2);
-+                                         if write optimization is used, must be >= 16. */
-+    uint8_t     manipExtraSpace;    /**< Maximum extra size needed (insertion-size minus removal-size);
-+                                         Note that this field impacts the size of the buffer-prefix
-+                                         (i.e. it pushes the data offset);
-+                                         This field is irrelevant if DPAA_VERSION==10 */
-+} t_FmBufferPrefixContent;
-+
-+/**************************************************************************//**
-+ @Description   A structure of information about each of the external
-+                buffer pools used by a port or storage-profile.
-+*//***************************************************************************/
-+typedef struct t_FmExtPoolParams {
-+    uint8_t                 id;     /**< External buffer pool id */
-+    uint16_t                size;   /**< External buffer pool buffer size */
-+} t_FmExtPoolParams;
-+
-+/**************************************************************************//**
-+ @Description   A structure for informing the driver about the external
-+                buffer pools allocated in the BM and used by a port or a
-+                storage-profile.
-+*//***************************************************************************/
-+typedef struct t_FmExtPools {
-+    uint8_t                 numOfPoolsUsed;     /**< Number of pools use by this port */
-+    t_FmExtPoolParams       extBufPool[FM_PORT_MAX_NUM_OF_EXT_POOLS];
-+                                                /**< Parameters for each port */
-+} t_FmExtPools;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining backup BM Pools.
-+*//***************************************************************************/
-+typedef struct t_FmBackupBmPools {
-+    uint8_t     numOfBackupPools;       /**< Number of BM backup pools -
-+                                             must be smaller than the total number of
-+                                             pools defined for the specified port.*/
-+    uint8_t     poolIds[FM_PORT_MAX_NUM_OF_EXT_POOLS];
-+                                        /**< numOfBackupPools pool id's, specifying which
-+                                             pools should be used only as backup. Pool
-+                                             id's specified here must be a subset of the
-+                                             pools used by the specified port.*/
-+} t_FmBackupBmPools;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining BM pool depletion criteria
-+*//***************************************************************************/
-+typedef struct t_FmBufPoolDepletion {
-+    bool        poolsGrpModeEnable;                 /**< select mode in which pause frames will be sent after
-+                                                         a number of pools (all together!) are depleted */
-+    uint8_t     numOfPools;                         /**< the number of depleted pools that will invoke
-+                                                         pause frames transmission. */
-+    bool        poolsToConsider[BM_MAX_NUM_OF_POOLS];
-+                                                    /**< For each pool, TRUE if it should be considered for
-+                                                         depletion (Note - this pool must be used by this port!). */
-+    bool        singlePoolModeEnable;               /**< select mode in which pause frames will be sent after
-+                                                         a single-pool is depleted; */
-+    bool        poolsToConsiderForSingleMode[BM_MAX_NUM_OF_POOLS];
-+                                                    /**< For each pool, TRUE if it should be considered for
-+                                                         depletion (Note - this pool must be used by this port!) */
-+#if (DPAA_VERSION >= 11)
-+    bool        pfcPrioritiesEn[FM_MAX_NUM_OF_PFC_PRIORITIES];
-+                                                    /**< This field is used by the MAC as the Priority Enable Vector in the PFC frame which is transmitted */
-+#endif /* (DPAA_VERSION >= 11) */
-+} t_FmBufPoolDepletion;
-+
-+/**************************************************************************//**
-+ @Description   A Structure for defining Ucode patch for loading.
-+*//***************************************************************************/
-+typedef struct t_FmFirmwareParams {
-+    uint32_t                size;                   /**< Size of uCode */
-+    uint32_t                *p_Code;                /**< A pointer to the uCode */
-+} t_FmFirmwareParams;
-+
-+/**************************************************************************//**
-+ @Description   A Structure for defining FM initialization parameters
-+*//***************************************************************************/
-+typedef struct t_FmParams {
-+    uint8_t                 fmId;                   /**< Index of the FM */
-+    uint8_t                 guestId;                /**< FM Partition Id */
-+    uintptr_t               baseAddr;               /**< A pointer to base of memory mapped FM registers (virtual);
-+                                                         this field is optional when the FM runs in "guest-mode"
-+                                                         (i.e. guestId != NCSW_MASTER_ID); in that case, the driver will
-+                                                         use the memory-map instead of calling the IPC where possible;
-+                                                         NOTE that this should include ALL common registers of the FM including
-+                                                         the PCD registers area (i.e. until the VSP pages - 880KB). */
-+    t_Handle                h_FmMuram;              /**< A handle of an initialized MURAM object,
-+                                                         to be used by the FM. */
-+    uint16_t                fmClkFreq;              /**< In Mhz;
-+                                                         Relevant when FM not runs in "guest-mode". */
-+    uint16_t                fmMacClkRatio;          /**< FM MAC Clock ratio, for backward comparability:
-+                                                                     when fmMacClkRatio = 0, ratio is 2:1
-+                                                                     when fmMacClkRatio = 1, ratio is 1:1  */
-+    t_FmExceptionsCallback  *f_Exception;           /**< An application callback routine to handle exceptions;
-+                                                         Relevant when FM not runs in "guest-mode". */
-+    t_FmBusErrorCallback    *f_BusError;            /**< An application callback routine to handle exceptions;
-+                                                         Relevant when FM not runs in "guest-mode". */
-+    t_Handle                h_App;                  /**< A handle to an application layer object; This handle will
-+                                                         be passed by the driver upon calling the above callbacks;
-+                                                         Relevant when FM not runs in "guest-mode". */
-+    int                     irq;                    /**< FM interrupt source for normal events;
-+                                                         Relevant when FM not runs in "guest-mode". */
-+    int                     errIrq;                 /**< FM interrupt source for errors;
-+                                                         Relevant when FM not runs in "guest-mode". */
-+    t_FmFirmwareParams      firmware;               /**< The firmware parameters structure;
-+                                                         Relevant when FM not runs in "guest-mode". */
-+
-+#if (DPAA_VERSION >= 11)
-+    uintptr_t               vspBaseAddr;            /**< A pointer to base of memory mapped FM VSP registers (virtual);
-+                                                         i.e. up to 24KB, depending on the specific chip. */
-+    uint8_t                 partVSPBase;            /**< The first Virtual-Storage-Profile-id dedicated to this partition.
-+                                                         NOTE: this parameter relevant only when working with multiple partitions. */
-+    uint8_t                 partNumOfVSPs;          /**< Number of VSPs dedicated to this partition.
-+                                                         NOTE: this parameter relevant only when working with multiple partitions. */
-+#endif /* (DPAA_VERSION >= 11) */
-+} t_FmParams;
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_Config
-+
-+ @Description   Creates the FM module and returns its handle (descriptor).
-+                This descriptor must be passed as first parameter to all other
-+                FM function calls.
-+
-+                No actual initialization or configuration of FM hardware is
-+                done by this routine. All FM parameters get default values that
-+                may be changed by calling one or more of the advance config routines.
-+
-+ @Param[in]     p_FmParams  - A pointer to a data structure of mandatory FM parameters
-+
-+ @Return        A handle to the FM object, or NULL for Failure.
-+*//***************************************************************************/
-+t_Handle FM_Config(t_FmParams *p_FmParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_Init
-+
-+ @Description   Initializes the FM module by defining the software structure
-+                and configuring the hardware registers.
-+
-+ @Param[in]     h_Fm - FM module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_Init(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FM_Free
-+
-+ @Description   Frees all resources that were assigned to FM module.
-+
-+                Calling this routine invalidates the descriptor.
-+
-+ @Param[in]     h_Fm - FM module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_Free(t_Handle h_Fm);
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_advanced_init_grp    FM Advanced Configuration Unit
-+
-+ @Description   Advanced configuration routines are optional routines that may
-+                be called in order to change the default driver settings.
-+
-+                Note: Advanced configuration routines are not available for guest partition.
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   Enum for selecting DMA debug mode
-+*//***************************************************************************/
-+typedef enum e_FmDmaDbgCntMode {
-+    e_FM_DMA_DBG_NO_CNT             = 0,    /**< No counting */
-+    e_FM_DMA_DBG_CNT_DONE,                  /**< Count DONE commands */
-+    e_FM_DMA_DBG_CNT_COMM_Q_EM,             /**< count command queue emergency signals */
-+    e_FM_DMA_DBG_CNT_INT_READ_EM,           /**< Count Internal Read buffer emergency signal */
-+    e_FM_DMA_DBG_CNT_INT_WRITE_EM,          /**< Count Internal Write buffer emergency signal */
-+    e_FM_DMA_DBG_CNT_FPM_WAIT,              /**< Count FPM WAIT signal */
-+    e_FM_DMA_DBG_CNT_SIGLE_BIT_ECC,         /**< Single bit ECC errors. */
-+    e_FM_DMA_DBG_CNT_RAW_WAR_PROT           /**< Number of times there was a need for RAW & WAR protection. */
-+} e_FmDmaDbgCntMode;
-+
-+/**************************************************************************//**
-+ @Description   Enum for selecting DMA Cache Override
-+*//***************************************************************************/
-+typedef enum e_FmDmaCacheOverride {
-+    e_FM_DMA_NO_CACHE_OR = 0,               /**< No override of the Cache field */
-+    e_FM_DMA_NO_STASH_DATA,                 /**< Data should not be stashed in system level cache */
-+    e_FM_DMA_MAY_STASH_DATA,                /**< Data may be stashed in system level cache */
-+    e_FM_DMA_STASH_DATA                     /**< Data should be stashed in system level cache */
-+} e_FmDmaCacheOverride;
-+
-+/**************************************************************************//**
-+ @Description   Enum for selecting DMA External Bus Priority
-+*//***************************************************************************/
-+typedef enum e_FmDmaExtBusPri {
-+    e_FM_DMA_EXT_BUS_NORMAL = 0,            /**< Normal priority */
-+    e_FM_DMA_EXT_BUS_EBS,                   /**< AXI extended bus service priority */
-+    e_FM_DMA_EXT_BUS_SOS,                   /**< AXI sos priority */
-+    e_FM_DMA_EXT_BUS_EBS_AND_SOS            /**< AXI ebs + sos priority */
-+} e_FmDmaExtBusPri;
-+
-+/**************************************************************************//**
-+ @Description   Enum for choosing the field that will be output on AID
-+*//***************************************************************************/
-+typedef enum e_FmDmaAidMode {
-+    e_FM_DMA_AID_OUT_PORT_ID = 0,           /**< 4 LSB of PORT_ID */
-+    e_FM_DMA_AID_OUT_TNUM                   /**< 4 LSB of TNUM */
-+} e_FmDmaAidMode;
-+
-+/**************************************************************************//**
-+ @Description   Enum for selecting FPM Catastrophic error behavior
-+*//***************************************************************************/
-+typedef enum e_FmCatastrophicErr {
-+    e_FM_CATASTROPHIC_ERR_STALL_PORT = 0,   /**< Port_ID is stalled (only reset can release it) */
-+    e_FM_CATASTROPHIC_ERR_STALL_TASK        /**< Only erroneous task is stalled */
-+} e_FmCatastrophicErr;
-+
-+/**************************************************************************//**
-+ @Description   Enum for selecting FPM DMA Error behavior
-+*//***************************************************************************/
-+typedef enum e_FmDmaErr {
-+    e_FM_DMA_ERR_CATASTROPHIC = 0,          /**< Dma error is treated as a catastrophic
-+                                                 error (e_FmCatastrophicErr)*/
-+    e_FM_DMA_ERR_REPORT                     /**< Dma error is just reported */
-+} e_FmDmaErr;
-+
-+/**************************************************************************//**
-+ @Description   Enum for selecting DMA Emergency level by BMI emergency signal
-+*//***************************************************************************/
-+typedef enum e_FmDmaEmergencyLevel {
-+    e_FM_DMA_EM_EBS = 0,                    /**< EBS emergency */
-+    e_FM_DMA_EM_SOS                         /**< SOS emergency */
-+} e_FmDmaEmergencyLevel;
-+
-+/**************************************************************************//**
-+ @Collection   Enum for selecting DMA Emergency options
-+*//***************************************************************************/
-+typedef uint32_t fmEmergencyBus_t;          /**< DMA emergency options */
-+
-+#define  FM_DMA_MURAM_READ_EMERGENCY        0x00800000    /**< Enable emergency for MURAM1 */
-+#define  FM_DMA_MURAM_WRITE_EMERGENCY       0x00400000    /**< Enable emergency for MURAM2 */
-+#define  FM_DMA_EXT_BUS_EMERGENCY           0x00100000    /**< Enable emergency for external bus */
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining DMA emergency level
-+*//***************************************************************************/
-+typedef struct t_FmDmaEmergency {
-+    fmEmergencyBus_t        emergencyBusSelect;             /**< An OR of the busses where emergency
-+                                                                 should be enabled */
-+    e_FmDmaEmergencyLevel   emergencyLevel;                 /**< EBS/SOS */
-+} t_FmDmaEmergency;
-+
-+/**************************************************************************//*
-+ @Description   structure for defining FM threshold
-+*//***************************************************************************/
-+typedef struct t_FmThresholds {
-+    uint8_t                 dispLimit;                      /**< The number of times a frames may
-+                                                                 be passed in the FM before assumed to
-+                                                                 be looping. */
-+    uint8_t                 prsDispTh;                      /**< This is the number pf packets that may be
-+                                                                 queued in the parser dispatch queue*/
-+    uint8_t                 plcrDispTh;                     /**< This is the number pf packets that may be
-+                                                                 queued in the policer dispatch queue*/
-+    uint8_t                 kgDispTh;                       /**< This is the number pf packets that may be
-+                                                                 queued in the keygen dispatch queue*/
-+    uint8_t                 bmiDispTh;                      /**< This is the number pf packets that may be
-+                                                                 queued in the BMI dispatch queue*/
-+    uint8_t                 qmiEnqDispTh;                   /**< This is the number pf packets that may be
-+                                                                 queued in the QMI enqueue dispatch queue*/
-+    uint8_t                 qmiDeqDispTh;                   /**< This is the number pf packets that may be
-+                                                                 queued in the QMI dequeue dispatch queue*/
-+    uint8_t                 fmCtl1DispTh;                   /**< This is the number pf packets that may be
-+                                                                 queued in fmCtl1 dispatch queue*/
-+    uint8_t                 fmCtl2DispTh;                   /**< This is the number pf packets that may be
-+                                                                 queued in fmCtl2 dispatch queue*/
-+} t_FmThresholds;
-+
-+/**************************************************************************//*
-+ @Description   structure for defining DMA thresholds
-+*//***************************************************************************/
-+typedef struct t_FmDmaThresholds {
-+    uint8_t                     assertEmergency;            /**< When this value is reached,
-+                                                                 assert emergency (Threshold)*/
-+    uint8_t                     clearEmergency;             /**< After emergency is asserted, it is held
-+                                                                 until this value is reached (Hystheresis) */
-+} t_FmDmaThresholds;
-+
-+/**************************************************************************//**
-+ @Function      t_FmResetOnInitOverrideCallback
-+
-+ @Description   FMan specific reset on init user callback routine,
-+                will be used to override the standard FMan reset on init procedure
-+
-+ @Param[in]     h_Fm  - FMan handler
-+*//***************************************************************************/
-+typedef void (t_FmResetOnInitOverrideCallback)(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigResetOnInit
-+
-+ @Description   Define whether to reset the FM before initialization.
-+                Change the default configuration [DEFAULT_resetOnInit].
-+
-+ @Param[in]     h_Fm                A handle to an FM Module.
-+ @Param[in]     enable              When TRUE, FM will be reset before any initialization.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigResetOnInit(t_Handle h_Fm, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigResetOnInitOverrideCallback
-+
-+ @Description   Define a special reset of FM before initialization.
-+                Change the default configuration [DEFAULT_resetOnInitOverrideCallback].
-+
-+ @Param[in]     h_Fm                	A handle to an FM Module.
-+ @Param[in]     f_ResetOnInitOverride   FM specific reset on init user callback routine.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigResetOnInitOverrideCallback(t_Handle h_Fm, t_FmResetOnInitOverrideCallback *f_ResetOnInitOverride);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigTotalFifoSize
-+
-+ @Description   Define Total FIFO size for the whole FM.
-+                Calling this routine changes the total Fifo size in the internal driver
-+                data base from its default configuration [DEFAULT_totalFifoSize]
-+
-+ @Param[in]     h_Fm                A handle to an FM Module.
-+ @Param[in]     totalFifoSize       The selected new value.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigTotalFifoSize(t_Handle h_Fm, uint32_t totalFifoSize);
-+
-+ /**************************************************************************//**
-+ @Function      FM_ConfigDmaCacheOverride
-+
-+ @Description   Define cache override mode.
-+                Calling this routine changes the cache override mode
-+                in the internal driver data base from its default configuration [DEFAULT_cacheOverride]
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     cacheOverride   The selected new value.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigDmaCacheOverride(t_Handle h_Fm, e_FmDmaCacheOverride cacheOverride);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigDmaAidOverride
-+
-+ @Description   Define DMA AID override mode.
-+                Calling this routine changes the AID override mode
-+                in the internal driver data base from its default configuration  [DEFAULT_aidOverride]
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     aidOverride     The selected new value.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigDmaAidOverride(t_Handle h_Fm, bool aidOverride);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigDmaAidMode
-+
-+ @Description   Define DMA AID  mode.
-+                Calling this routine changes the AID  mode in the internal
-+                driver data base from its default configuration [DEFAULT_aidMode]
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     aidMode         The selected new value.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigDmaAidMode(t_Handle h_Fm, e_FmDmaAidMode aidMode);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigDmaAxiDbgNumOfBeats
-+
-+ @Description   Define DMA AXI number of beats.
-+                Calling this routine changes the AXI number of beats in the internal
-+                driver data base from its default configuration [DEFAULT_axiDbgNumOfBeats]
-+
-+ @Param[in]     h_Fm                A handle to an FM Module.
-+ @Param[in]     axiDbgNumOfBeats    The selected new value.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigDmaAxiDbgNumOfBeats(t_Handle h_Fm, uint8_t axiDbgNumOfBeats);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigDmaCamNumOfEntries
-+
-+ @Description   Define number of CAM entries.
-+                Calling this routine changes the number of CAM entries in the internal
-+                driver data base from its default configuration [DEFAULT_dmaCamNumOfEntries].
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     numOfEntries    The selected new value.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigDmaCamNumOfEntries(t_Handle h_Fm, uint8_t numOfEntries);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigEnableCounters
-+
-+ @Description   Obsolete, always return E_OK.
-+
-+ @Param[in]     h_Fm    A handle to an FM Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_ConfigEnableCounters(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigDmaDbgCounter
-+
-+ @Description   Define DMA debug counter.
-+                Calling this routine changes the number of the DMA debug counter in the internal
-+                driver data base from its default configuration [DEFAULT_dmaDbgCntMode].
-+
-+ @Param[in]     h_Fm                A handle to an FM Module.
-+ @Param[in]     fmDmaDbgCntMode     An enum selecting the debug counter mode.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigDmaDbgCounter(t_Handle h_Fm, e_FmDmaDbgCntMode fmDmaDbgCntMode);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigDmaStopOnBusErr
-+
-+ @Description   Define bus error behavior.
-+                Calling this routine changes the bus error behavior definition
-+                in the internal driver data base from its default
-+                configuration [DEFAULT_dmaStopOnBusError].
-+
-+ @Param[in]     h_Fm    A handle to an FM Module.
-+ @Param[in]     stop    TRUE to stop on bus error, FALSE to continue.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                Only if bus error is enabled.
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigDmaStopOnBusErr(t_Handle h_Fm, bool stop);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigDmaEmergency
-+
-+ @Description   Define DMA emergency.
-+                Calling this routine changes the DMA emergency definition
-+                in the internal driver data base from its default
-+                configuration where's it's disabled.
-+
-+ @Param[in]     h_Fm        A handle to an FM Module.
-+ @Param[in]     p_Emergency An OR mask of all required options.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigDmaEmergency(t_Handle h_Fm, t_FmDmaEmergency *p_Emergency);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigDmaErr
-+
-+ @Description   DMA error treatment.
-+                Calling this routine changes the DMA error treatment
-+                in the internal driver data base from its default
-+                configuration [DEFAULT_dmaErr].
-+
-+ @Param[in]     h_Fm    A handle to an FM Module.
-+ @Param[in]     dmaErr  The selected new choice.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigDmaErr(t_Handle h_Fm, e_FmDmaErr dmaErr);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigCatastrophicErr
-+
-+ @Description   Define FM behavior on catastrophic error.
-+                Calling this routine changes the FM behavior on catastrophic
-+                error in the internal driver data base from its default
-+                [DEFAULT_catastrophicErr].
-+
-+ @Param[in]     h_Fm                A handle to an FM Module.
-+ @Param[in]     catastrophicErr     The selected new choice.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigCatastrophicErr(t_Handle h_Fm, e_FmCatastrophicErr catastrophicErr);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigEnableMuramTestMode
-+
-+ @Description   Enable MURAM test mode.
-+                Calling this routine changes the internal driver data base
-+                from its default selection of test mode where it's disabled.
-+                This routine is only avaiable on old FM revisions (FMan v2).
-+
-+ @Param[in]     h_Fm    A handle to an FM Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigEnableMuramTestMode(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigEnableIramTestMode
-+
-+ @Description   Enable IRAM test mode.
-+                Calling this routine changes the internal driver data base
-+                from its default selection of test mode where it's disabled.
-+                This routine is only avaiable on old FM revisions (FMan v2).
-+
-+ @Param[in]     h_Fm    A handle to an FM Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigEnableIramTestMode(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigHaltOnExternalActivation
-+
-+ @Description   Define FM behavior on external halt activation.
-+                Calling this routine changes the FM behavior on external halt
-+                activation in the internal driver data base from its default
-+                [DEFAULT_haltOnExternalActivation].
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     enable          TRUE to enable halt on external halt
-+                                activation.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigHaltOnExternalActivation(t_Handle h_Fm, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigHaltOnUnrecoverableEccError
-+
-+ @Description   Define FM behavior on external halt activation.
-+                Calling this routine changes the FM behavior on unrecoverable
-+                ECC error in the internal driver data base from its default
-+                [DEFAULT_haltOnUnrecoverableEccError].
-+                This routine is only avaiable on old FM revisions (FMan v2).
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     enable          TRUE to enable halt on unrecoverable Ecc error
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigHaltOnUnrecoverableEccError(t_Handle h_Fm, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigException
-+
-+ @Description   Define FM exceptions.
-+                Calling this routine changes the exceptions defaults in the
-+                internal driver data base where all exceptions are enabled.
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     exception       The exception to be selected.
-+ @Param[in]     enable          TRUE to enable interrupt, FALSE to mask it.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigException(t_Handle h_Fm, e_FmExceptions exception, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigExternalEccRamsEnable
-+
-+ @Description   Select external ECC enabling.
-+                Calling this routine changes the ECC enabling control in the internal
-+                driver data base from its default [DEFAULT_externalEccRamsEnable].
-+                When this option is enabled Rams ECC enabling is not effected
-+                by FM_EnableRamsEcc/FM_DisableRamsEcc, but by a JTAG.
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     enable          TRUE to enable this option.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigExternalEccRamsEnable(t_Handle h_Fm, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_ConfigTnumAgingPeriod
-+
-+ @Description   Define Tnum aging period.
-+                Calling this routine changes the Tnum aging of dequeue TNUMs
-+                in the QMI in the internal driver data base from its default
-+                [DEFAULT_tnumAgingPeriod].
-+
-+ @Param[in]     h_Fm                A handle to an FM Module.
-+ @Param[in]     tnumAgingPeriod     Tnum Aging Period in microseconds.
-+                                    Note that period is recalculated in units of
-+                                    64 FM clocks. Driver will pick the closest
-+                                    possible period.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+                NOTE that if some MAC is configured for PFC, '0' value is NOT
-+                allowed.
-+*//***************************************************************************/
-+t_Error FM_ConfigTnumAgingPeriod(t_Handle h_Fm, uint16_t tnumAgingPeriod);
-+
-+/**************************************************************************//*
-+ @Function      FM_ConfigDmaEmergencySmoother
-+
-+ @Description   Define DMA emergency smoother.
-+                Calling this routine changes the definition of the minimum
-+                amount of DATA beats transferred on the AXI READ and WRITE
-+                ports before lowering the emergency level.
-+                By default smoother is disabled.
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     emergencyCnt    emergency switching counter.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigDmaEmergencySmoother(t_Handle h_Fm, uint32_t emergencyCnt);
-+
-+/**************************************************************************//*
-+ @Function      FM_ConfigThresholds
-+
-+ @Description   Calling this routine changes the internal driver data base
-+                from its default FM threshold configuration:
-+                    dispLimit:    [DEFAULT_dispLimit]
-+                    prsDispTh:    [DEFAULT_prsDispTh]
-+                    plcrDispTh:   [DEFAULT_plcrDispTh]
-+                    kgDispTh:     [DEFAULT_kgDispTh]
-+                    bmiDispTh:    [DEFAULT_bmiDispTh]
-+                    qmiEnqDispTh: [DEFAULT_qmiEnqDispTh]
-+                    qmiDeqDispTh: [DEFAULT_qmiDeqDispTh]
-+                    fmCtl1DispTh: [DEFAULT_fmCtl1DispTh]
-+                    fmCtl2DispTh: [DEFAULT_fmCtl2DispTh]
-+
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     p_FmThresholds  A structure of threshold parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigThresholds(t_Handle h_Fm, t_FmThresholds *p_FmThresholds);
-+
-+/**************************************************************************//*
-+ @Function      FM_ConfigDmaSosEmergencyThreshold
-+
-+ @Description   Calling this routine changes the internal driver data base
-+                from its default dma SOS emergency configuration [DEFAULT_dmaSosEmergency]
-+
-+ @Param[in]     h_Fm                A handle to an FM Module.
-+ @Param[in]     dmaSosEmergency     The selected new value.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigDmaSosEmergencyThreshold(t_Handle h_Fm, uint32_t dmaSosEmergency);
-+
-+/**************************************************************************//*
-+ @Function      FM_ConfigDmaWriteBufThresholds
-+
-+ @Description   Calling this routine changes the internal driver data base
-+                from its default configuration of DMA write buffer threshold
-+                assertEmergency: [DEFAULT_dmaWriteIntBufLow]
-+                clearEmergency:  [DEFAULT_dmaWriteIntBufHigh]
-+                This routine is only avaiable on old FM revisions (FMan v2).
-+
-+ @Param[in]     h_Fm                A handle to an FM Module.
-+ @Param[in]     p_FmDmaThresholds   A structure of thresholds to define emergency behavior -
-+                                    When 'assertEmergency' value is reached, emergency is asserted,
-+                                    then it is held until 'clearEmergency' value is reached.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigDmaWriteBufThresholds(t_Handle h_Fm, t_FmDmaThresholds *p_FmDmaThresholds);
-+
-+ /**************************************************************************//*
-+ @Function      FM_ConfigDmaCommQThresholds
-+
-+ @Description   Calling this routine changes the internal driver data base
-+                from its default configuration of DMA command queue threshold
-+                assertEmergency: [DEFAULT_dmaCommQLow]
-+                clearEmergency:  [DEFAULT_dmaCommQHigh]
-+
-+ @Param[in]     h_Fm                A handle to an FM Module.
-+ @Param[in]     p_FmDmaThresholds   A structure of thresholds to define emergency behavior -
-+                                    When 'assertEmergency' value is reached, emergency is asserted,
-+                                    then it is held until 'clearEmergency' value is reached..
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigDmaCommQThresholds(t_Handle h_Fm, t_FmDmaThresholds *p_FmDmaThresholds);
-+
-+/**************************************************************************//*
-+ @Function      FM_ConfigDmaReadBufThresholds
-+
-+ @Description   Calling this routine changes the internal driver data base
-+                from its default configuration of DMA read buffer threshold
-+                assertEmergency: [DEFAULT_dmaReadIntBufLow]
-+                clearEmergency:  [DEFAULT_dmaReadIntBufHigh]
-+                This routine is only avaiable on old FM revisions (FMan v2).
-+
-+ @Param[in]     h_Fm                A handle to an FM Module.
-+ @Param[in]     p_FmDmaThresholds   A structure of thresholds to define emergency behavior -
-+                                    When 'assertEmergency' value is reached, emergency is asserted,
-+                                    then it is held until 'clearEmergency' value is reached..
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigDmaReadBufThresholds(t_Handle h_Fm, t_FmDmaThresholds *p_FmDmaThresholds);
-+
-+/**************************************************************************//*
-+ @Function      FM_ConfigDmaWatchdog
-+
-+ @Description   Calling this routine changes the internal driver data base
-+                from its default watchdog configuration, which is disabled
-+                [DEFAULT_dmaWatchdog].
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     watchDogValue   The selected new value - in microseconds.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ConfigDmaWatchdog(t_Handle h_Fm, uint32_t watchDogValue);
-+
-+/** @} */ /* end of FM_advanced_init_grp group */
-+/** @} */ /* end of FM_init_grp group */
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_runtime_control_grp FM Runtime Control Unit
-+
-+ @Description   FM Runtime control unit API functions, definitions and enums.
-+                The FM driver provides a set of control routines.
-+                These routines may only be called after the module was fully
-+                initialized (both configuration and initialization routines were
-+                called). They are typically used to get information from hardware
-+                (status, counters/statistics, revision etc.), to modify a current
-+                state or to force/enable a required action. Run-time control may
-+                be called whenever necessary and as many times as needed.
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Collection   General FM defines.
-+*//***************************************************************************/
-+#define FM_MAX_NUM_OF_VALID_PORTS   (FM_MAX_NUM_OF_OH_PORTS +       \
-+                                     FM_MAX_NUM_OF_1G_RX_PORTS +    \
-+                                     FM_MAX_NUM_OF_10G_RX_PORTS +   \
-+                                     FM_MAX_NUM_OF_1G_TX_PORTS +    \
-+                                     FM_MAX_NUM_OF_10G_TX_PORTS)      /**< Number of available FM ports */
-+/* @} */
-+
-+/**************************************************************************//*
-+ @Description   A Structure for Port bandwidth requirement. Port is identified
-+                by type and relative id.
-+*//***************************************************************************/
-+typedef struct t_FmPortBandwidth {
-+    e_FmPortType        type;           /**< FM port type */
-+    uint8_t             relativePortId; /**< Type relative port id */
-+    uint8_t             bandwidth;      /**< bandwidth - (in term of percents) */
-+} t_FmPortBandwidth;
-+
-+/**************************************************************************//*
-+ @Description   A Structure containing an array of Port bandwidth requirements.
-+                The user should state the ports requiring bandwidth in terms of
-+                percentage - i.e. all port's bandwidths in the array must add
-+                up to 100.
-+*//***************************************************************************/
-+typedef struct t_FmPortsBandwidthParams {
-+    uint8_t             numOfPorts;         /**< The number of relevant ports, which is the
-+                                                 number of valid entries in the array below */
-+    t_FmPortBandwidth   portsBandwidths[FM_MAX_NUM_OF_VALID_PORTS];
-+                                            /**< for each port, it's bandwidth (all port's
-+                                                 bandwidths must add up to 100.*/
-+} t_FmPortsBandwidthParams;
-+
-+/**************************************************************************//**
-+ @Description   DMA Emergency control on MURAM
-+*//***************************************************************************/
-+typedef enum e_FmDmaMuramPort {
-+    e_FM_DMA_MURAM_PORT_WRITE,              /**< MURAM write port */
-+    e_FM_DMA_MURAM_PORT_READ                /**< MURAM read port */
-+} e_FmDmaMuramPort;
-+
-+/**************************************************************************//**
-+ @Description   Enum for defining FM counters
-+*//***************************************************************************/
-+typedef enum e_FmCounters {
-+    e_FM_COUNTERS_ENQ_TOTAL_FRAME = 0,              /**< QMI total enqueued frames counter */
-+    e_FM_COUNTERS_DEQ_TOTAL_FRAME,                  /**< QMI total dequeued frames counter */
-+    e_FM_COUNTERS_DEQ_0,                            /**< QMI 0 frames from QMan counter */
-+    e_FM_COUNTERS_DEQ_1,                            /**< QMI 1 frames from QMan counter */
-+    e_FM_COUNTERS_DEQ_2,                            /**< QMI 2 frames from QMan counter */
-+    e_FM_COUNTERS_DEQ_3,                            /**< QMI 3 frames from QMan counter */
-+    e_FM_COUNTERS_DEQ_FROM_DEFAULT,                 /**< QMI dequeue from default queue counter */
-+    e_FM_COUNTERS_DEQ_FROM_CONTEXT,                 /**< QMI dequeue from FQ context counter */
-+    e_FM_COUNTERS_DEQ_FROM_FD,                      /**< QMI dequeue from FD command field counter */
-+    e_FM_COUNTERS_DEQ_CONFIRM                       /**< QMI dequeue confirm counter */
-+} e_FmCounters;
-+
-+/**************************************************************************//**
-+ @Description   A Structure for returning FM revision information
-+*//***************************************************************************/
-+typedef struct t_FmRevisionInfo {
-+    uint8_t         majorRev;               /**< Major revision */
-+    uint8_t         minorRev;               /**< Minor revision */
-+} t_FmRevisionInfo;
-+
-+/**************************************************************************//**
-+ @Description   A Structure for returning FM ctrl code revision information
-+*//***************************************************************************/
-+typedef struct t_FmCtrlCodeRevisionInfo {
-+    uint16_t        packageRev;             /**< Package revision */
-+    uint8_t         majorRev;               /**< Major revision */
-+    uint8_t         minorRev;               /**< Minor revision */
-+} t_FmCtrlCodeRevisionInfo;
-+
-+/**************************************************************************//**
-+ @Description   A Structure for defining DMA status
-+*//***************************************************************************/
-+typedef struct t_FmDmaStatus {
-+    bool    cmqNotEmpty;            /**< Command queue is not empty */
-+    bool    busError;               /**< Bus error occurred */
-+    bool    readBufEccError;        /**< Double ECC error on buffer Read (Valid for FM rev < 6)*/
-+    bool    writeBufEccSysError;    /**< Double ECC error on buffer write from system side (Valid for FM rev < 6)*/
-+    bool    writeBufEccFmError;     /**< Double ECC error on buffer write from FM side (Valid for FM rev < 6) */
-+    bool    singlePortEccError;     /**< Single Port ECC error from FM side (Valid for FM rev >= 6)*/
-+} t_FmDmaStatus;
-+
-+/**************************************************************************//**
-+ @Description   A Structure for obtaining FM controller monitor values
-+*//***************************************************************************/
-+typedef struct t_FmCtrlMon {
-+    uint8_t percentCnt[2];          /**< Percentage value */
-+} t_FmCtrlMon;
-+
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+/**************************************************************************//**
-+ @Function      FM_DumpRegs
-+
-+ @Description   Dumps all FM registers
-+
-+ @Param[in]     h_Fm      A handle to an FM Module.
-+
-+ @Return        E_OK on success;
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+t_Error FM_DumpRegs(t_Handle h_Fm);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+/**************************************************************************//**
-+ @Function      FM_SetException
-+
-+ @Description   Calling this routine enables/disables the specified exception.
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     exception       The exception to be selected.
-+ @Param[in]     enable          TRUE to enable interrupt, FALSE to mask it.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_SetException(t_Handle h_Fm, e_FmExceptions exception, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_EnableRamsEcc
-+
-+ @Description   Enables ECC mechanism for all the different FM RAM's; E.g. IRAM,
-+                MURAM, Parser, Keygen, Policer, etc.
-+                Note:
-+                If FM_ConfigExternalEccRamsEnable was called to enable external
-+                setting of ECC, this routine effects IRAM ECC only.
-+                This routine is also called by the driver if an ECC exception is
-+                enabled.
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_EnableRamsEcc(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FM_DisableRamsEcc
-+
-+ @Description   Disables ECC mechanism for all the different FM RAM's; E.g. IRAM,
-+                MURAM, Parser, Keygen, Policer, etc.
-+                Note:
-+                If FM_ConfigExternalEccRamsEnable was called to enable external
-+                setting of ECC, this routine effects IRAM ECC only.
-+                In opposed to FM_EnableRamsEcc, this routine must be called
-+                explicitly to disable all Rams ECC.
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Config() and before FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_DisableRamsEcc(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FM_GetRevision
-+
-+ @Description   Returns the FM revision
-+
-+ @Param[in]     h_Fm                A handle to an FM Module.
-+ @Param[out]    p_FmRevisionInfo    A structure of revision information parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+t_Error  FM_GetRevision(t_Handle h_Fm, t_FmRevisionInfo *p_FmRevisionInfo);
-+
-+/**************************************************************************//**
-+ @Function      FM_GetFmanCtrlCodeRevision
-+
-+ @Description   Returns the Fman controller code revision
-+
-+ @Param[in]     h_Fm                A handle to an FM Module.
-+ @Param[out]    p_RevisionInfo      A structure of revision information parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+t_Error FM_GetFmanCtrlCodeRevision(t_Handle h_Fm, t_FmCtrlCodeRevisionInfo *p_RevisionInfo);
-+
-+/**************************************************************************//**
-+ @Function      FM_GetCounter
-+
-+ @Description   Reads one of the FM counters.
-+
-+ @Param[in]     h_Fm        A handle to an FM Module.
-+ @Param[in]     counter     The requested counter.
-+
-+ @Return        Counter's current value.
-+
-+ @Cautions      Allowed only following FM_Init().
-+                Note that it is user's responsibility to call this routine only
-+                for enabled counters, and there will be no indication if a
-+                disabled counter is accessed.
-+*//***************************************************************************/
-+uint32_t  FM_GetCounter(t_Handle h_Fm, e_FmCounters counter);
-+
-+/**************************************************************************//**
-+ @Function      FM_ModifyCounter
-+
-+ @Description   Sets a value to an enabled counter. Use "0" to reset the counter.
-+
-+ @Param[in]     h_Fm        A handle to an FM Module.
-+ @Param[in]     counter     The requested counter.
-+ @Param[in]     val         The requested value to be written into the counter.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error  FM_ModifyCounter(t_Handle h_Fm, e_FmCounters counter, uint32_t val);
-+
-+/**************************************************************************//**
-+ @Function      FM_Resume
-+
-+ @Description   Release FM after halt FM command or after unrecoverable ECC error.
-+
-+ @Param[in]     h_Fm        A handle to an FM Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+void FM_Resume(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FM_SetDmaEmergency
-+
-+ @Description   Manual emergency set
-+
-+ @Param[in]     h_Fm        A handle to an FM Module.
-+ @Param[in]     muramPort   MURAM direction select.
-+ @Param[in]     enable      TRUE to manually enable emergency, FALSE to disable.
-+
-+ @Return        None.
-+
-+ @Cautions      Allowed only following FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+void FM_SetDmaEmergency(t_Handle h_Fm, e_FmDmaMuramPort muramPort, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_SetDmaExtBusPri
-+
-+ @Description   Set the DMA external bus priority
-+
-+ @Param[in]     h_Fm    A handle to an FM Module.
-+ @Param[in]     pri     External bus priority select
-+
-+ @Return        None.
-+
-+ @Cautions      Allowed only following FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+void FM_SetDmaExtBusPri(t_Handle h_Fm, e_FmDmaExtBusPri pri);
-+
-+/**************************************************************************//**
-+ @Function      FM_GetDmaStatus
-+
-+ @Description   Reads the DMA current status
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[out]    p_FmDmaStatus   A structure of DMA status parameters.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+void FM_GetDmaStatus(t_Handle h_Fm, t_FmDmaStatus *p_FmDmaStatus);
-+
-+/**************************************************************************//**
-+ @Function      FM_ErrorIsr
-+
-+ @Description   FM interrupt-service-routine for errors.
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+
-+ @Return        E_OK on success; E_EMPTY if no errors found in register, other
-+                error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ErrorIsr(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FM_EventIsr
-+
-+ @Description   FM interrupt-service-routine for normal events.
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+
-+ @Cautions      Allowed only following FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+void FM_EventIsr(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FM_GetSpecialOperationCoding
-+
-+ @Description   Return a specific coding according to the input mask.
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     spOper          special operation mask.
-+ @Param[out]    p_SpOperCoding  special operation code.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+t_Error FM_GetSpecialOperationCoding(t_Handle               h_Fm,
-+                                     fmSpecialOperations_t  spOper,
-+                                     uint8_t                *p_SpOperCoding);
-+
-+/**************************************************************************//**
-+ @Function      FM_CtrlMonStart
-+
-+ @Description   Start monitoring utilization of all available FM controllers.
-+
-+                In order to obtain FM controllers utilization the following sequence
-+                should be used:
-+                -# FM_CtrlMonStart()
-+                -# FM_CtrlMonStop()
-+                -# FM_CtrlMonGetCounters() - issued for each FM controller
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID).
-+*//***************************************************************************/
-+t_Error FM_CtrlMonStart(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FM_CtrlMonStop
-+
-+ @Description   Stop monitoring utilization of all available FM controllers.
-+
-+                In order to obtain FM controllers utilization the following sequence
-+                should be used:
-+                -# FM_CtrlMonStart()
-+                -# FM_CtrlMonStop()
-+                -# FM_CtrlMonGetCounters() - issued for each FM controller
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID).
-+*//***************************************************************************/
-+t_Error FM_CtrlMonStop(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FM_CtrlMonGetCounters
-+
-+ @Description   Obtain FM controller utilization parameters.
-+
-+                In order to obtain FM controllers utilization the following sequence
-+                should be used:
-+                -# FM_CtrlMonStart()
-+                -# FM_CtrlMonStop()
-+                -# FM_CtrlMonGetCounters() - issued for each FM controller
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     fmCtrlIndex     FM Controller index for that utilization results
-+                                are requested.
-+ @Param[in]     p_Mon           Pointer to utilization results structure.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID).
-+*//***************************************************************************/
-+t_Error FM_CtrlMonGetCounters(t_Handle h_Fm, uint8_t fmCtrlIndex, t_FmCtrlMon *p_Mon);
-+
-+
-+/**************************************************************************//*
-+ @Function      FM_ForceIntr
-+
-+ @Description   Causes an interrupt event on the requested source.
-+
-+ @Param[in]     h_Fm            A handle to an FM Module.
-+ @Param[in]     exception       An exception to be forced.
-+
-+ @Return        E_OK on success; Error code if the exception is not enabled,
-+                or is not able to create interrupt.
-+
-+ @Cautions      Allowed only following FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_ForceIntr (t_Handle h_Fm, e_FmExceptions exception);
-+
-+/**************************************************************************//*
-+ @Function      FM_SetPortsBandwidth
-+
-+ @Description   Sets relative weights between ports when accessing common resources.
-+
-+ @Param[in]     h_Fm                A handle to an FM Module.
-+ @Param[in]     p_PortsBandwidth    A structure of ports bandwidths in percentage, i.e.
-+                                    total must equal 100.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_SetPortsBandwidth(t_Handle h_Fm, t_FmPortsBandwidthParams *p_PortsBandwidth);
-+
-+/**************************************************************************//*
-+ @Function      FM_GetMuramHandle
-+
-+ @Description   Gets the corresponding MURAM handle
-+
-+ @Param[in]     h_Fm                A handle to an FM Module.
-+
-+ @Return        MURAM handle; NULL otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Handle FM_GetMuramHandle(t_Handle h_Fm);
-+
-+/** @} */ /* end of FM_runtime_control_grp group */
-+/** @} */ /* end of FM_lib_grp group */
-+/** @} */ /* end of FM_grp group */
-+
-+
-+#ifdef NCSW_BACKWARD_COMPATIBLE_API
-+typedef t_FmFirmwareParams          t_FmPcdFirmwareParams;
-+typedef t_FmBufferPrefixContent     t_FmPortBufferPrefixContent;
-+typedef t_FmExtPoolParams           t_FmPortExtPoolParams;
-+typedef t_FmExtPools                t_FmPortExtPools;
-+typedef t_FmBackupBmPools           t_FmPortBackupBmPools;
-+typedef t_FmBufPoolDepletion        t_FmPortBufPoolDepletion;
-+typedef e_FmDmaSwapOption           e_FmPortDmaSwapOption;
-+typedef e_FmDmaCacheOption          e_FmPortDmaCacheOption;
-+
-+#define FM_CONTEXTA_GET_OVVERIDE    FM_CONTEXTA_GET_OVERRIDE
-+#define FM_CONTEXTA_SET_OVVERIDE    FM_CONTEXTA_SET_OVERRIDE
-+
-+#define e_FM_EX_BMI_PIPELINE_ECC    e_FM_EX_BMI_STORAGE_PROFILE_ECC
-+#define e_FM_PORT_DMA_NO_SWP        e_FM_DMA_NO_SWP
-+#define e_FM_PORT_DMA_SWP_PPC_LE    e_FM_DMA_SWP_PPC_LE
-+#define e_FM_PORT_DMA_SWP_BE        e_FM_DMA_SWP_BE
-+#define e_FM_PORT_DMA_NO_STASH      e_FM_DMA_NO_STASH
-+#define e_FM_PORT_DMA_STASH         e_FM_DMA_STASH
-+#endif /* NCSW_BACKWARD_COMPATIBLE_API */
-+
-+
-+#endif /* __FM_EXT */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_mac_ext.h
-@@ -0,0 +1,859 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          fm_mac_ext.h
-+
-+ @Description   FM MAC ...
-+*//***************************************************************************/
-+#ifndef __FM_MAC_EXT_H
-+#define __FM_MAC_EXT_H
-+
-+#include "std_ext.h"
-+#include "enet_ext.h"
-+
-+
-+/**************************************************************************//**
-+
-+ @Group         FM_grp Frame Manager API
-+
-+ @Description   FM API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         FM_mac_grp FM MAC
-+
-+ @Description   FM MAC API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+#define FM_MAC_NO_PFC   0xff
-+
-+
-+/**************************************************************************//**
-+ @Description   FM MAC Exceptions
-+*//***************************************************************************/
-+typedef enum e_FmMacExceptions {
-+    e_FM_MAC_EX_10G_MDIO_SCAN_EVENTMDIO = 0                     /**< 10GEC MDIO scan event interrupt */
-+   ,e_FM_MAC_EX_10G_MDIO_CMD_CMPL                               /**< 10GEC MDIO command completion interrupt */
-+   ,e_FM_MAC_EX_10G_REM_FAULT                                   /**< 10GEC, mEMAC Remote fault interrupt */
-+   ,e_FM_MAC_EX_10G_LOC_FAULT                                   /**< 10GEC, mEMAC Local fault interrupt */
-+   ,e_FM_MAC_EX_10G_1TX_ECC_ER                                  /**< 10GEC, mEMAC Transmit frame ECC error interrupt */
-+   ,e_FM_MAC_EX_10G_TX_FIFO_UNFL                                /**< 10GEC, mEMAC Transmit FIFO underflow interrupt */
-+   ,e_FM_MAC_EX_10G_TX_FIFO_OVFL                                /**< 10GEC, mEMAC Transmit FIFO overflow interrupt */
-+   ,e_FM_MAC_EX_10G_TX_ER                                       /**< 10GEC Transmit frame error interrupt */
-+   ,e_FM_MAC_EX_10G_RX_FIFO_OVFL                                /**< 10GEC, mEMAC Receive FIFO overflow interrupt */
-+   ,e_FM_MAC_EX_10G_RX_ECC_ER                                   /**< 10GEC, mEMAC Receive frame ECC error interrupt */
-+   ,e_FM_MAC_EX_10G_RX_JAB_FRM                                  /**< 10GEC Receive jabber frame interrupt */
-+   ,e_FM_MAC_EX_10G_RX_OVRSZ_FRM                                /**< 10GEC Receive oversized frame interrupt */
-+   ,e_FM_MAC_EX_10G_RX_RUNT_FRM                                 /**< 10GEC Receive runt frame interrupt */
-+   ,e_FM_MAC_EX_10G_RX_FRAG_FRM                                 /**< 10GEC Receive fragment frame interrupt */
-+   ,e_FM_MAC_EX_10G_RX_LEN_ER                                   /**< 10GEC Receive payload length error interrupt */
-+   ,e_FM_MAC_EX_10G_RX_CRC_ER                                   /**< 10GEC Receive CRC error interrupt */
-+   ,e_FM_MAC_EX_10G_RX_ALIGN_ER                                 /**< 10GEC Receive alignment error interrupt */
-+   ,e_FM_MAC_EX_1G_BAB_RX                                       /**< dTSEC Babbling receive error */
-+   ,e_FM_MAC_EX_1G_RX_CTL                                       /**< dTSEC Receive control (pause frame) interrupt */
-+   ,e_FM_MAC_EX_1G_GRATEFUL_TX_STP_COMPLET                      /**< dTSEC Graceful transmit stop complete */
-+   ,e_FM_MAC_EX_1G_BAB_TX                                       /**< dTSEC Babbling transmit error */
-+   ,e_FM_MAC_EX_1G_TX_CTL                                       /**< dTSEC Transmit control (pause frame) interrupt */
-+   ,e_FM_MAC_EX_1G_TX_ERR                                       /**< dTSEC Transmit error */
-+   ,e_FM_MAC_EX_1G_LATE_COL                                     /**< dTSEC Late collision */
-+   ,e_FM_MAC_EX_1G_COL_RET_LMT                                  /**< dTSEC Collision retry limit */
-+   ,e_FM_MAC_EX_1G_TX_FIFO_UNDRN                                /**< dTSEC Transmit FIFO underrun */
-+   ,e_FM_MAC_EX_1G_MAG_PCKT                                     /**< dTSEC Magic Packet detection */
-+   ,e_FM_MAC_EX_1G_MII_MNG_RD_COMPLET                           /**< dTSEC MII management read completion */
-+   ,e_FM_MAC_EX_1G_MII_MNG_WR_COMPLET                           /**< dTSEC MII management write completion */
-+   ,e_FM_MAC_EX_1G_GRATEFUL_RX_STP_COMPLET                      /**< dTSEC Graceful receive stop complete */
-+   ,e_FM_MAC_EX_1G_TX_DATA_ERR                                  /**< dTSEC Internal data error on transmit */
-+   ,e_FM_MAC_EX_1G_RX_DATA_ERR                                  /**< dTSEC Internal data error on receive */
-+   ,e_FM_MAC_EX_1G_1588_TS_RX_ERR                               /**< dTSEC Time-Stamp Receive Error */
-+   ,e_FM_MAC_EX_1G_RX_MIB_CNT_OVFL                              /**< dTSEC MIB counter overflow */
-+   ,e_FM_MAC_EX_TS_FIFO_ECC_ERR                                 /**< mEMAC Time-stamp FIFO ECC error interrupt;
-+                                                                     not supported on T4240/B4860 rev1 chips */
-+   ,e_FM_MAC_EX_MAGIC_PACKET_INDICATION = e_FM_MAC_EX_1G_MAG_PCKT
-+                                                                /**< mEMAC Magic Packet Indication Interrupt */
-+} e_FmMacExceptions;
-+
-+/**************************************************************************//**
-+ @Description   TM MAC statistics level
-+*//***************************************************************************/
-+typedef enum e_FmMacStatisticsLevel {
-+    e_FM_MAC_NONE_STATISTICS = 0,       /**< No statistics */
-+    e_FM_MAC_PARTIAL_STATISTICS,        /**< Only error counters are available; Optimized for performance */
-+    e_FM_MAC_FULL_STATISTICS            /**< All counters available; Not optimized for performance */
-+} e_FmMacStatisticsLevel;
-+
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Description   Priority Flow Control Parameters
-+*//***************************************************************************/
-+typedef struct t_FmMacPfcParams {
-+    bool        pfcEnable;                                      /**< Enable/Disable PFC */
-+
-+    uint16_t    pauseQuanta[FM_MAX_NUM_OF_PFC_PRIORITIES];      /**< Pause Quanta per priority to be sent in a pause frame. Each quanta represents a 512 bit-times*/
-+
-+    uint16_t    pauseThresholdQuanta[FM_MAX_NUM_OF_PFC_PRIORITIES];/**< Pause threshold per priority, when timer passes this threshold time a PFC frames is sent again if the port is still congested or BM pool in depletion*/
-+
-+
-+} t_FmMacPfcParams;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/**************************************************************************//**
-+ @Function      t_FmMacExceptionCallback
-+
-+ @Description   Fm Mac Exception Callback from FM MAC to the user
-+
-+ @Param[in]     h_App             - Handle to the upper layer handler
-+
-+ @Param[in]     exceptions        - The exception that occurred
-+
-+ @Return        void.
-+*//***************************************************************************/
-+typedef void (t_FmMacExceptionCallback)(t_Handle h_App, e_FmMacExceptions exceptions);
-+
-+
-+/**************************************************************************//**
-+ @Description   TM MAC statistics rfc3635
-+*//***************************************************************************/
-+typedef struct t_FmMacStatistics {
-+/* RMON */
-+    uint64_t  eStatPkts64;             /**< r-10G tr-DT 64 byte frame counter */
-+    uint64_t  eStatPkts65to127;        /**< r-10G 65 to 127 byte frame counter */
-+    uint64_t  eStatPkts128to255;       /**< r-10G 128 to 255 byte frame counter */
-+    uint64_t  eStatPkts256to511;       /**< r-10G 256 to 511 byte frame counter */
-+    uint64_t  eStatPkts512to1023;      /**< r-10G 512 to 1023 byte frame counter */
-+    uint64_t  eStatPkts1024to1518;     /**< r-10G 1024 to 1518 byte frame counter */
-+    uint64_t  eStatPkts1519to1522;     /**< r-10G 1519 to 1522 byte good frame count */
-+/* */
-+    uint64_t  eStatFragments;          /**< Total number of packets that were less than 64 octets long with a wrong CRC.*/
-+    uint64_t  eStatJabbers;            /**< Total number of packets longer than valid maximum length octets */
-+    uint64_t  eStatsDropEvents;        /**< number of dropped packets due to internal errors of the MAC Client (during receive). */
-+    uint64_t  eStatCRCAlignErrors;     /**< Incremented when frames of correct length but with CRC error are received.*/
-+    uint64_t  eStatUndersizePkts;      /**< Incremented for frames under 64 bytes with a valid FCS and otherwise well formed;
-+                                            This count does not include range length errors */
-+    uint64_t  eStatOversizePkts;       /**< Incremented for frames which exceed 1518 (non VLAN) or 1522 (VLAN) and contains
-+                                            a valid FCS and otherwise well formed */
-+/* Pause */
-+    uint64_t  teStatPause;             /**< Pause MAC Control received */
-+    uint64_t  reStatPause;             /**< Pause MAC Control sent */
-+/* MIB II */
-+    uint64_t  ifInOctets;              /**< Total number of byte received. */
-+    uint64_t  ifInPkts;                /**< Total number of packets received.*/
-+    uint64_t  ifInUcastPkts;           /**< Total number of unicast frame received;
-+                                            NOTE: this counter is not supported on dTSEC MAC */
-+    uint64_t  ifInMcastPkts;           /**< Total number of multicast frame received*/
-+    uint64_t  ifInBcastPkts;           /**< Total number of broadcast frame received */
-+    uint64_t  ifInDiscards;            /**< Frames received, but discarded due to problems within the MAC RX. */
-+    uint64_t  ifInErrors;              /**< Number of frames received with error:
-+                                               - FIFO Overflow Error
-+                                               - CRC Error
-+                                               - Frame Too Long Error
-+                                               - Alignment Error
-+                                               - The dedicated Error Code (0xfe, not a code error) was received */
-+    uint64_t  ifOutOctets;             /**< Total number of byte sent. */
-+    uint64_t  ifOutPkts;               /**< Total number of packets sent .*/
-+    uint64_t  ifOutUcastPkts;          /**< Total number of unicast frame sent;
-+                                            NOTE: this counter is not supported on dTSEC MAC */
-+    uint64_t  ifOutMcastPkts;          /**< Total number of multicast frame sent */
-+    uint64_t  ifOutBcastPkts;          /**< Total number of multicast frame sent */
-+    uint64_t  ifOutDiscards;           /**< Frames received, but discarded due to problems within the MAC TX N/A!.*/
-+    uint64_t  ifOutErrors;             /**< Number of frames transmitted with error:
-+                                               - FIFO Overflow Error
-+                                               - FIFO Underflow Error
-+                                               - Other */
-+} t_FmMacStatistics;
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_mac_init_grp FM MAC Initialization Unit
-+
-+ @Description   FM MAC Initialization Unit
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   FM MAC config input
-+*//***************************************************************************/
-+typedef struct t_FmMacParams {
-+    uintptr_t                   baseAddr;           /**< Base of memory mapped FM MAC registers */
-+    t_EnetAddr                  addr;               /**< MAC address of device; First octet is sent first */
-+    uint8_t                     macId;              /**< MAC ID;
-+                                                         numbering of dTSEC and 1G-mEMAC:
-+                                                            0 - FM_MAX_NUM_OF_1G_MACS;
-+                                                         numbering of 10G-MAC (TGEC) and 10G-mEMAC:
-+                                                            0 - FM_MAX_NUM_OF_10G_MACS */
-+    e_EnetMode                  enetMode;           /**< Ethernet operation mode (MAC-PHY interface and speed);
-+                                                         Note that the speed should indicate the maximum rate that
-+                                                         this MAC should support rather than the actual speed;
-+                                                         i.e. user should use the FM_MAC_AdjustLink() routine to
-+                                                         provide accurate speed;
-+                                                         In case of mEMAC RGMII mode, the MAC is configured to RGMII
-+                                                         automatic mode, where actual speed/duplex mode information
-+                                                         is provided by PHY automatically in-band; FM_MAC_AdjustLink()
-+                                                         function should be used to switch to manual RGMII speed/duplex mode
-+                                                         configuration if RGMII PHY doesn't support in-band status signaling;
-+                                                         In addition, in mEMAC, in case where user is using the higher MACs
-+                                                         (i.e. the MACs that should support 10G), user should pass here
-+                                                         speed=10000 even if the interface is not allowing that (e.g. SGMII). */
-+    t_Handle                    h_Fm;               /**< A handle to the FM object this port related to */
-+    int                         mdioIrq;            /**< MDIO exceptions interrupt source - not valid for all
-+                                                         MACs; MUST be set to 'NO_IRQ' for MACs that don't have
-+                                                         mdio-irq, or for polling */
-+    t_FmMacExceptionCallback    *f_Event;           /**< MDIO Events Callback Routine         */
-+    t_FmMacExceptionCallback    *f_Exception;       /**< Exception Callback Routine         */
-+    t_Handle                    h_App;              /**< A handle to an application layer object; This handle will
-+                                                         be passed by the driver upon calling the above callbacks */
-+} t_FmMacParams;
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_Config
-+
-+ @Description   Creates descriptor for the FM MAC module.
-+
-+                The routine returns a handle (descriptor) to the FM MAC object.
-+                This descriptor must be passed as first parameter to all other
-+                FM MAC function calls.
-+
-+                No actual initialization or configuration of FM MAC hardware is
-+                done by this routine.
-+
-+ @Param[in]     p_FmMacParam   - Pointer to data structure of parameters
-+
-+ @Retval        Handle to FM MAC object, or NULL for Failure.
-+*//***************************************************************************/
-+t_Handle FM_MAC_Config(t_FmMacParams *p_FmMacParam);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_Init
-+
-+ @Description   Initializes the FM MAC module
-+
-+ @Param[in]     h_FmMac - FM module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error  FM_MAC_Init(t_Handle h_FmMac);
-+
-+/**************************************************************************//**
-+ @Function      FM_Free
-+
-+ @Description   Frees all resources that were assigned to FM MAC module.
-+
-+                Calling this routine invalidates the descriptor.
-+
-+ @Param[in]     h_FmMac - FM module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error  FM_MAC_Free(t_Handle h_FmMac);
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_mac_advanced_init_grp    FM MAC Advanced Configuration Unit
-+
-+ @Description   Configuration functions used to change default values.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_ConfigResetOnInit
-+
-+ @Description   Tell the driver whether to reset the FM MAC before initialization or
-+                not. It changes the default configuration [DEFAULT_resetOnInit].
-+
-+ @Param[in]     h_FmMac    A handle to a FM MAC Module.
-+ @Param[in]     enable     When TRUE, FM will be reset before any initialization.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Config() and before FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_ConfigResetOnInit(t_Handle h_FmMac, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_ConfigLoopback
-+
-+ @Description   Enable/Disable internal loopback mode
-+
-+ @Param[in]     h_FmMac    A handle to a FM MAC Module.
-+ @Param[in]     enable     TRUE to enable or FALSE to disable.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Config() and before FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_ConfigLoopback(t_Handle h_FmMac, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_ConfigMaxFrameLength
-+
-+ @Description   Setup maximum Rx Frame Length (in 1G MAC, effects also Tx)
-+
-+ @Param[in]     h_FmMac    A handle to a FM MAC Module.
-+ @Param[in]     newVal     MAX Frame length
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Config() and before FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_ConfigMaxFrameLength(t_Handle h_FmMac, uint16_t newVal);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_ConfigWan
-+
-+ @Description   ENABLE WAN mode in 10G-MAC
-+
-+ @Param[in]     h_FmMac    A handle to a FM MAC Module.
-+ @Param[in]     enable     TRUE to enable or FALSE to disable.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Config() and before FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_ConfigWan(t_Handle h_FmMac, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_ConfigPadAndCrc
-+
-+ @Description   Config PAD and CRC mode
-+
-+ @Param[in]     h_FmMac    A handle to a FM MAC Module.
-+ @Param[in]     enable     TRUE to enable or FALSE to disable.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Config() and before FM_MAC_Init().
-+                Not supported on 10G-MAC (i.e. CRC & PAD are added automatically
-+                by HW); on mEMAC, this routine supports only PAD (i.e. CRC is
-+                added automatically by HW).
-+*//***************************************************************************/
-+t_Error FM_MAC_ConfigPadAndCrc(t_Handle h_FmMac, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_ConfigHalfDuplex
-+
-+ @Description   Config Half Duplex Mode
-+
-+ @Param[in]     h_FmMac    A handle to a FM MAC Module.
-+ @Param[in]     enable     TRUE to enable or FALSE to disable.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Config() and before FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_ConfigHalfDuplex(t_Handle h_FmMac, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_ConfigTbiPhyAddr
-+
-+ @Description   Configures the address of internal TBI PHY.
-+
-+ @Param[in]     h_FmMac    A handle to a FM MAC Module.
-+ @Param[in]     newVal     TBI PHY address (1-31).
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Config() and before FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_ConfigTbiPhyAddr(t_Handle h_FmMac, uint8_t newVal);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_ConfigLengthCheck
-+
-+ @Description   Configure the frame length checking.
-+
-+ @Param[in]     h_FmMac    A handle to a FM MAC Module.
-+ @Param[in]     enable     TRUE to enable or FALSE to disable.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Config() and before FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_ConfigLengthCheck(t_Handle h_FmMac, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_ConfigException
-+
-+ @Description   Change Exception selection from default
-+
-+ @Param[in]     h_FmMac         A handle to a FM MAC Module.
-+ @Param[in]     ex              Type of the desired exceptions
-+ @Param[in]     enable          TRUE to enable the specified exception, FALSE to disable it.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Config() and before FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_ConfigException(t_Handle h_FmMac, e_FmMacExceptions ex, bool enable);
-+
-+#ifdef FM_TX_ECC_FRMS_ERRATA_10GMAC_A004
-+t_Error FM_MAC_ConfigSkipFman11Workaround (t_Handle h_FmMac);
-+#endif /* FM_TX_ECC_FRMS_ERRATA_10GMAC_A004 */
-+/** @} */ /* end of FM_mac_advanced_init_grp group */
-+/** @} */ /* end of FM_mac_init_grp group */
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_mac_runtime_control_grp FM MAC Runtime Control Unit
-+
-+ @Description   FM MAC Runtime control unit API functions, definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_Enable
-+
-+ @Description   Enable the MAC
-+
-+ @Param[in]     h_FmMac    A handle to a FM MAC Module.
-+ @Param[in]     mode       Mode of operation (RX, TX, Both)
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_Enable(t_Handle h_FmMac,  e_CommMode mode);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_Disable
-+
-+ @Description   DISABLE the MAC
-+
-+ @Param[in]     h_FmMac    A handle to a FM MAC Module.
-+ @Param[in]     mode       Define what part to Disable (RX,  TX or BOTH)
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_Disable(t_Handle h_FmMac, e_CommMode mode);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_Resume
-+
-+ @Description   Re-init the MAC after suspend
-+
-+ @Param[in]     h_FmMac    A handle to a FM MAC Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_Resume(t_Handle h_FmMac);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_Enable1588TimeStamp
-+
-+ @Description   Enables the TSU operation.
-+
-+ @Param[in]     h_Fm   - Handle to the PTP as returned from the FM_MAC_PtpConfig.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_Enable1588TimeStamp(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_Disable1588TimeStamp
-+
-+ @Description   Disables the TSU operation.
-+
-+ @Param[in]     h_Fm   - Handle to the PTP as returned from the FM_MAC_PtpConfig.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_Disable1588TimeStamp(t_Handle h_Fm);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_SetTxAutoPauseFrames
-+
-+ @Description   Enable/Disable transmission of Pause-Frames.
-+                The routine changes the default configuration [DEFAULT_TX_PAUSE_TIME].
-+
-+ @Param[in]     h_FmMac       -  A handle to a FM MAC Module.
-+ @Param[in]     pauseTime     -  Pause quanta value used with transmitted pause frames.
-+                                 Each quanta represents a 512 bit-times; Note that '0'
-+                                 as an input here will be used as disabling the
-+                                 transmission of the pause-frames.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_SetTxAutoPauseFrames(t_Handle h_FmMac,
-+                                    uint16_t pauseTime);
-+
-+ /**************************************************************************//**
-+ @Function      FM_MAC_SetTxPauseFrames
-+
-+ @Description   Enable/Disable transmission of Pause-Frames.
-+                The routine changes the default configuration:
-+                pause-time - [DEFAULT_TX_PAUSE_TIME]
-+                threshold-time - [0]
-+
-+ @Param[in]     h_FmMac       -  A handle to a FM MAC Module.
-+ @Param[in]     priority      -  the PFC class of service; use 'FM_MAC_NO_PFC'
-+                                 to indicate legacy pause support (i.e. no PFC).
-+ @Param[in]     pauseTime     -  Pause quanta value used with transmitted pause frames.
-+                                 Each quanta represents a 512 bit-times;
-+                                 Note that '0' as an input here will be used as disabling the
-+                                 transmission of the pause-frames.
-+ @Param[in]     threshTime    -  Pause Threshold equanta value used by the MAC to retransmit pause frame.
-+                                 if the situation causing a pause frame to be sent didn't finish when the timer
-+                                 reached the threshold quanta, the MAC will retransmit the pause frame.
-+                                 Each quanta represents a 512 bit-times.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init().
-+                In order for PFC to work properly the user must configure
-+                TNUM-aging in the tx-port it is recommended that pre-fetch and
-+                rate limit in the tx port should be disabled;
-+                PFC is supported only on new mEMAC; i.e. in MACs that don't have
-+                PFC support (10G-MAC and dTSEC), user should use 'FM_MAC_NO_PFC'
-+                in the 'priority' field.
-+*//***************************************************************************/
-+t_Error FM_MAC_SetTxPauseFrames(t_Handle h_FmMac,
-+                                uint8_t  priority,
-+                                uint16_t pauseTime,
-+                                uint16_t threshTime);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_SetRxIgnorePauseFrames
-+
-+ @Description   Enable/Disable ignoring of Pause-Frames.
-+
-+ @Param[in]     h_FmMac    - A handle to a FM MAC Module.
-+ @Param[in]     en         - boolean indicates whether to ignore the incoming pause
-+                             frames or not.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_SetRxIgnorePauseFrames(t_Handle h_FmMac, bool en);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_SetWakeOnLan
-+
-+ @Description   Enable/Disable Wake On Lan support
-+
-+ @Param[in]     h_FmMac    - A handle to a FM MAC Module.
-+ @Param[in]     en         - boolean indicates whether to enable Wake On Lan
-+                             support or not.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_SetWakeOnLan(t_Handle h_FmMac, bool en);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_ResetCounters
-+
-+ @Description   reset all statistics counters
-+
-+ @Param[in]     h_FmMac    - A handle to a FM MAC Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_ResetCounters(t_Handle h_FmMac);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_SetException
-+
-+ @Description   Enable/Disable a specific Exception
-+
-+ @Param[in]     h_FmMac        - A handle to a FM MAC Module.
-+ @Param[in]     ex             - Type of the desired exceptions
-+ @Param[in]     enable         - TRUE to enable the specified exception, FALSE to disable it.
-+
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_SetException(t_Handle h_FmMac, e_FmMacExceptions ex, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_SetStatistics
-+
-+ @Description   Define Statistics level.
-+                Where applicable, the routine also enables the MIB counters
-+                overflow interrupt in order to keep counters accurate
-+                and account for overflows.
-+                This routine is relevant only for dTSEC.
-+
-+ @Param[in]     h_FmMac         - A handle to a FM MAC Module.
-+ @Param[in]     statisticsLevel - Full statistics level provides all standard counters but may
-+                                  reduce performance. Partial statistics provides only special
-+                                  event counters (errors etc.). If selected, regular counters (such as
-+                                  byte/packet) will be invalid and will return -1.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_SetStatistics(t_Handle h_FmMac, e_FmMacStatisticsLevel statisticsLevel);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_GetStatistics
-+
-+ @Description   get all statistics counters
-+
-+ @Param[in]     h_FmMac       -  A handle to a FM MAC Module.
-+ @Param[in]     p_Statistics  -  Structure with statistics
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_GetStatistics(t_Handle h_FmMac, t_FmMacStatistics *p_Statistics);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_ModifyMacAddr
-+
-+ @Description   Replace the main MAC Address
-+
-+ @Param[in]     h_FmMac     -   A handle to a FM Module.
-+ @Param[in]     p_EnetAddr  -   Ethernet Mac address
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only after FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_ModifyMacAddr(t_Handle h_FmMac, t_EnetAddr *p_EnetAddr);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_AddHashMacAddr
-+
-+ @Description   Add an Address to the hash table. This is for filter purpose only.
-+
-+ @Param[in]     h_FmMac     -   A handle to a FM Module.
-+ @Param[in]     p_EnetAddr  -   Ethernet Mac address
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init(). It is a filter only address.
-+ @Cautions      Some address need to be filterd out in upper FM blocks.
-+*//***************************************************************************/
-+t_Error FM_MAC_AddHashMacAddr(t_Handle h_FmMac, t_EnetAddr *p_EnetAddr);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_RemoveHashMacAddr
-+
-+ @Description   Delete an Address to the hash table. This is for filter purpose only.
-+
-+ @Param[in]     h_FmMac     -   A handle to a FM Module.
-+ @Param[in]     p_EnetAddr  -   Ethernet Mac address
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_RemoveHashMacAddr(t_Handle h_FmMac, t_EnetAddr *p_EnetAddr);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_AddExactMatchMacAddr
-+
-+ @Description   Add a unicast or multicast mac address for exact-match filtering
-+                (8 on dTSEC, 2 for 10G-MAC)
-+
-+ @Param[in]     h_FmMac     -   A handle to a FM Module.
-+ @Param[in]     p_EnetAddr  -   MAC Address to ADD
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only after FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_AddExactMatchMacAddr(t_Handle h_FmMac, t_EnetAddr *p_EnetAddr);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_RemovelExactMatchMacAddr
-+
-+ @Description   Remove a uni cast or multi cast mac address.
-+
-+ @Param[in]     h_FmMac     -   A handle to a FM Module.
-+ @Param[in]     p_EnetAddr  -   MAC Address to remove
-+
-+ @Return        E_OK on success; Error code otherwise..
-+
-+ @Cautions      Allowed only after FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_RemovelExactMatchMacAddr(t_Handle h_FmMac, t_EnetAddr *p_EnetAddr);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_SetPromiscuous
-+
-+ @Description   Enable/Disable MAC Promiscuous mode for ALL mac addresses.
-+
-+ @Param[in]     h_FmMac    - A handle to a FM MAC Module.
-+ @Param[in]     enable     - TRUE to enable or FALSE to disable.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only after FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_SetPromiscuous(t_Handle h_FmMac, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_AdjustLink
-+
-+ @Description   Adjusts the Ethernet link with new speed/duplex setup.
-+                This routine is relevant for dTSEC and mEMAC.
-+                In case of mEMAC, this routine is also used for manual
-+                re-configuration of RGMII speed and duplex mode for
-+                RGMII PHYs not supporting in-band status information
-+                to MAC.
-+
-+ @Param[in]     h_FmMac     - A handle to a FM Module.
-+ @Param[in]     speed       - Ethernet speed.
-+ @Param[in]     fullDuplex  - TRUE for full-duplex mode;
-+                              FALSE for half-duplex mode.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_MAC_AdjustLink(t_Handle h_FmMac, e_EnetSpeed speed, bool fullDuplex);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_RestartAutoneg
-+
-+ @Description   Restarts the auto-negotiation process.
-+                When auto-negotiation process is invoked under traffic the
-+                auto-negotiation process between the internal SGMII PHY and the
-+                external PHY does not always complete successfully. Calling this
-+                function will restart the auto-negotiation process that will end
-+                successfully. It is recommended to call this function after issuing
-+                auto-negotiation restart command to the Eth Phy.
-+                This routine is relevant only for dTSEC.
-+
-+ @Param[in]     h_FmMac     - A handle to a FM Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_MAC_RestartAutoneg(t_Handle h_FmMac);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_GetId
-+
-+ @Description   Return the MAC ID
-+
-+ @Param[in]     h_FmMac     -   A handle to a FM Module.
-+ @Param[out]    p_MacId     -   MAC ID of device
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only after FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_GetId(t_Handle h_FmMac, uint32_t *p_MacId);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_GetVesrion
-+
-+ @Description   Return Mac HW chip version
-+
-+ @Param[in]     h_FmMac      -   A handle to a FM Module.
-+ @Param[out]    p_MacVresion -   Mac version as defined by the chip
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only after FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_GetVesrion(t_Handle h_FmMac, uint32_t *p_MacVresion);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_MII_WritePhyReg
-+
-+ @Description   Write data into Phy Register
-+
-+ @Param[in]     h_FmMac     -   A handle to a FM Module.
-+ @Param[in]     phyAddr     -   Phy Address on the MII bus
-+ @Param[in]     reg         -   Register Number.
-+ @Param[in]     data        -   Data to write.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only after FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_MII_WritePhyReg(t_Handle h_FmMac, uint8_t phyAddr, uint8_t reg, uint16_t data);
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_MII_ReadPhyReg
-+
-+ @Description   Read data from Phy Register
-+
-+ @Param[in]     h_FmMac     -   A handle to a FM Module.
-+ @Param[in]     phyAddr     -   Phy Address on the MII bus
-+ @Param[in]     reg         -   Register Number.
-+ @Param[out]    p_Data      -   Data from PHY.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only after FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_MII_ReadPhyReg(t_Handle h_FmMac,  uint8_t phyAddr, uint8_t reg, uint16_t *p_Data);
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+/**************************************************************************//**
-+ @Function      FM_MAC_DumpRegs
-+
-+ @Description   Dump internal registers
-+
-+ @Param[in]     h_FmMac     -   A handle to a FM Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only after FM_MAC_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_DumpRegs(t_Handle h_FmMac);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+/** @} */ /* end of FM_mac_runtime_control_grp group */
-+/** @} */ /* end of FM_mac_grp group */
-+/** @} */ /* end of FM_grp group */
-+
-+
-+#endif /* __FM_MAC_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_macsec_ext.h
-@@ -0,0 +1,1271 @@
-+/*
-+ * Copyright 2008-2015 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**************************************************************************//**
-+ @File          fm_macsec_ext.h
-+
-+ @Description   FM MACSEC ...
-+*//***************************************************************************/
-+#ifndef __FM_MACSEC_EXT_H
-+#define __FM_MACSEC_EXT_H
-+
-+#include "std_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_grp Frame Manager API
-+
-+ @Description   FM API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         FM_MACSEC_grp FM MACSEC
-+
-+ @Description   FM MACSEC API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   MACSEC Exceptions
-+*//***************************************************************************/
-+typedef enum e_FmMacsecExceptions {
-+    e_FM_MACSEC_EX_SINGLE_BIT_ECC,          /**< Single bit ECC error */
-+    e_FM_MACSEC_EX_MULTI_BIT_ECC            /**< Multi bit ECC error */
-+} e_FmMacsecExceptions;
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_MACSEC_init_grp FM-MACSEC Initialization Unit
-+
-+ @Description   FM MACSEC Initialization Unit
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      t_FmMacsecExceptionsCallback
-+
-+ @Description   Exceptions user callback routine, will be called upon an
-+                exception passing the exception identification.
-+
-+ @Param[in]     h_App       A handle to an application layer object; This handle
-+                            will be passed by the driver upon calling this callback.
-+ @Param[in]     exception   The exception.
-+*//***************************************************************************/
-+typedef void (t_FmMacsecExceptionsCallback) ( t_Handle                  h_App,
-+                                              e_FmMacsecExceptions      exception);
-+
-+
-+/**************************************************************************//**
-+ @Description   FM MACSEC config input
-+*//***************************************************************************/
-+typedef struct t_FmMacsecParams {
-+    t_Handle                                h_Fm;               /**< A handle to the FM object related to */
-+    bool                                    guestMode;          /**< Partition-id */
-+    union {
-+        struct {
-+            uint8_t                         fmMacId;            /**< FM MAC id */
-+        } guestParams;
-+
-+        struct {
-+            uintptr_t                       baseAddr;           /**< Base of memory mapped FM MACSEC registers */
-+            t_Handle                        h_FmMac;            /**< A handle to the FM MAC object  related to */
-+            t_FmMacsecExceptionsCallback    *f_Exception;       /**< Exception Callback Routine         */
-+            t_Handle                        h_App;              /**< A handle to an application layer object; This handle will
-+                                                                     be passed by the driver upon calling the above callbacks */
-+        } nonGuestParams;
-+    };
-+} t_FmMacsecParams;
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_Config
-+
-+ @Description   Creates descriptor for the FM MACSEC module;
-+
-+                The routine returns a handle (descriptor) to the FM MACSEC object;
-+                This descriptor must be passed as first parameter to all other
-+                FM MACSEC function calls;
-+
-+                No actual initialization or configuration of FM MACSEC hardware is
-+                done by this routine.
-+
-+ @Param[in]     p_FmMacsecParam     Pointer to data structure of parameters.
-+
-+ @Retval        Handle to FM MACSEC object, or NULL for Failure.
-+*//***************************************************************************/
-+t_Handle FM_MACSEC_Config(t_FmMacsecParams *p_FmMacsecParam);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_Init
-+
-+ @Description   Initializes the FM MACSEC module.
-+
-+ @Param[in]     h_FmMacsec      FM MACSEC module descriptor.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_MACSEC_Init(t_Handle h_FmMacsec);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_Free
-+
-+ @Description   Frees all resources that were assigned to FM MACSEC module;
-+
-+                Calling this routine invalidates the descriptor.
-+
-+ @Param[in]     h_FmMacsec      FM MACSEC module descriptor.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_MACSEC_Free(t_Handle h_FmMacsec);
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_MACSEC_advanced_init_grp    FM-MACSEC Advanced Configuration Unit
-+
-+ @Description   Configuration functions used to change default values.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   enum for unknown sci frame treatment
-+*//***************************************************************************/
-+typedef enum e_FmMacsecUnknownSciFrameTreatment {
-+    e_FM_MACSEC_UNKNOWN_SCI_FRAME_TREATMENT_DISCARD_BOTH = 0,                                               /**< Controlled port - Strict mode */
-+    e_FM_MACSEC_UNKNOWN_SCI_FRAME_TREATMENT_DISCARD_UNCONTROLLED_DELIVER_OR_DISCARD_CONTROLLED,             /**< If C bit clear deliver on controlled port, else discard
-+                                                                                                                 Controlled port - Check or Disable mode */
-+    e_FM_MACSEC_UNKNOWN_SCI_FRAME_TREATMENT_DELIVER_UNCONTROLLED_DISCARD_CONTROLLED,                        /**< Controlled port - Strict mode */
-+    e_FM_MACSEC_UNKNOWN_SCI_FRAME_TREATMENT_DELIVER_OR_DISCARD_UNCONTROLLED_DELIVER_OR_DISCARD_CONTROLLED   /**< If C bit set deliver on uncontrolled port and discard on controlled port,
-+                                                                                                                 else discard on uncontrolled port and deliver on controlled port
-+                                                                                                                 Controlled port - Check or Disable mode */
-+} e_FmMacsecUnknownSciFrameTreatment;
-+
-+/**************************************************************************//**
-+ @Description   enum for untag frame treatment
-+*//***************************************************************************/
-+typedef enum e_FmMacsecUntagFrameTreatment {
-+    e_FM_MACSEC_UNTAG_FRAME_TREATMENT_DELIVER_UNCONTROLLED_DISCARD_CONTROLLED = 0,                    /**< Controlled port - Strict mode */
-+    e_FM_MACSEC_UNTAG_FRAME_TREATMENT_DISCARD_BOTH,                                                   /**< Controlled port - Strict mode */
-+    e_FM_MACSEC_UNTAG_FRAME_TREATMENT_DISCARD_UNCONTROLLED_DELIVER_CONTROLLED_UNMODIFIED              /**< Controlled port - Strict mode */
-+} e_FmMacsecUntagFrameTreatment;
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_ConfigUnknownSciFrameTreatment
-+
-+ @Description   Change the treatment for received frames with unknown sci from its default
-+                configuration [DEFAULT_unknownSciFrameTreatment].
-+
-+ @Param[in]     h_FmMacsec      FM MACSEC module descriptor.
-+ @Param[in]     treatMode       The selected mode.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_ConfigUnknownSciFrameTreatment(t_Handle h_FmMacsec, e_FmMacsecUnknownSciFrameTreatment treatMode);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_ConfigInvalidTagsFrameTreatment
-+
-+ @Description   Change the treatment for received frames with invalid tags or
-+                a zero value PN or an invalid ICV from its default configuration
-+                [DEFAULT_invalidTagsFrameTreatment].
-+
-+ @Param[in]     h_FmMacsec              FM MACSEC module descriptor.
-+ @Param[in]     deliverUncontrolled     If True deliver on the uncontrolled port, else discard;
-+                                        In both cases discard on the controlled port;
-+                                        this provide Strict, Check or Disable mode.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_ConfigInvalidTagsFrameTreatment(t_Handle h_FmMacsec, bool deliverUncontrolled);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_ConfigEncryptWithNoChangedTextFrameTreatment
-+
-+ @Description   Change the treatment for received frames with the Encryption bit
-+                set and the Changed Text bit clear from its default configuration
-+                [DEFAULT_encryptWithNoChangedTextFrameTreatment].
-+
-+ @Param[in]     h_FmMacsec              FM MACSEC module descriptor.
-+ @Param[in]     discardUncontrolled     If True discard on the uncontrolled port, else deliver;
-+                                        In both cases discard on the controlled port;
-+                                        this provide Strict, Check or Disable mode.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_ConfigEncryptWithNoChangedTextFrameTreatment(t_Handle h_FmMacsec, bool discardUncontrolled);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_ConfigChangedTextWithNoEncryptFrameTreatment
-+
-+ @Description   Change the treatment for received frames with the Encryption bit
-+                clear and the Changed Text bit set from its default configuration
-+                [DEFAULT_changedTextWithNoEncryptFrameTreatment].
-+
-+ @Param[in]     h_FmMacsec              FM MACSEC module descriptor.
-+ @Param[in]     deliverUncontrolled     If True deliver on the uncontrolled port, else discard;
-+                                        In both cases discard on the controlled port;
-+                                        this provide Strict, Check or Disable mode.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_ConfigChangedTextWithNoEncryptFrameTreatment(t_Handle h_FmMacsec, bool deliverUncontrolled);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_ConfigUntagFrameTreatment
-+
-+ @Description   Change the treatment for received frames without the MAC security tag (SecTAG)
-+                from its default configuration [DEFAULT_untagFrameTreatment].
-+
-+ @Param[in]     h_FmMacsec     FM MACSEC module descriptor.
-+ @Param[in]     treatMode      The selected mode.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_ConfigUntagFrameTreatment(t_Handle h_FmMacsec, e_FmMacsecUntagFrameTreatment treatMode);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_ConfigOnlyScbIsSetFrameTreatment
-+
-+ @Description   Change the treatment for received frames with only SCB bit set
-+                from its default configuration [DEFAULT_onlyScbIsSetFrameTreatment].
-+
-+ @Param[in]     h_FmMacsec              FM MACSEC module descriptor.
-+ @Param[in]     deliverUncontrolled     If True deliver on the uncontrolled port, else discard;
-+                                        In both cases discard on the controlled port;
-+                                        this provide Strict, Check or Disable mode.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_ConfigOnlyScbIsSetFrameTreatment(t_Handle h_FmMacsec, bool deliverUncontrolled);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_ConfigPnExhaustionThreshold
-+
-+ @Description   It's provide the ability to configure a PN exhaustion threshold;
-+                When the NextPn crosses this value an interrupt event
-+                is asserted to warn that the active SA should re-key.
-+
-+ @Param[in]     h_FmMacsec     FM MACSEC module descriptor.
-+ @Param[in]     pnExhThr       If the threshold is reached, an interrupt event
-+                               is asserted to re-key.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_ConfigPnExhaustionThreshold(t_Handle h_FmMacsec, uint32_t pnExhThr);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_ConfigKeysUnreadable
-+
-+ @Description   Turn on privacy mode; All the keys and their hash values can't be read any more;
-+                Can not be cleared unless hard reset.
-+
-+ @Param[in]     h_FmMacsec         FM MACSEC module descriptor.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_ConfigKeysUnreadable(t_Handle h_FmMacsec);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_ConfigSectagWithoutSCI
-+
-+ @Description   Promise that all generated Sectag will be without SCI included.
-+
-+ @Param[in]     h_FmMacsec         FM MACSEC module descriptor.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_ConfigSectagWithoutSCI(t_Handle h_FmMacsec);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_ConfigException
-+
-+ @Description   Calling this routine changes the internal driver data base
-+                from its default selection of exceptions enablement;
-+                By default all exceptions are enabled.
-+
-+ @Param[in]     h_FmMacsec      FM MACSEC module descriptor.
-+ @Param[in]     exception       The exception to be selected.
-+ @Param[in]     enable          TRUE to enable interrupt, FALSE to mask it.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_ConfigException(t_Handle h_FmMacsec, e_FmMacsecExceptions exception, bool enable);
-+
-+/** @} */ /* end of FM_MACSEC_advanced_init_grp group */
-+/** @} */ /* end of FM_MACSEC_init_grp group */
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_MACSEC_runtime_control_grp FM-MACSEC Runtime Control Data Unit
-+
-+ @Description   FM MACSEC runtime control data unit API functions, definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_GetRevision
-+
-+ @Description   Return MACSEC HW chip revision
-+
-+ @Param[in]     h_FmMacsec         FM MACSEC module descriptor.
-+ @Param[out]    p_MacsecRevision   MACSEC revision as defined by the chip.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only after FM_MACSEC_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_GetRevision(t_Handle h_FmMacsec, uint32_t *p_MacsecRevision);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_Enable
-+
-+ @Description   This routine should be called after MACSEC is initialized for enabling all
-+                MACSEC engines according to their existing configuration.
-+
-+ @Param[in]     h_FmMacsec         FM MACSEC module descriptor.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_Init() and when MACSEC is disabled.
-+*//***************************************************************************/
-+t_Error FM_MACSEC_Enable(t_Handle h_FmMacsec);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_Disable
-+
-+ @Description   This routine may be called when MACSEC is enabled in order to
-+                disable all MACSEC engines; The MACSEC is working in bypass mode.
-+
-+ @Param[in]     h_FmMacsec         FM MACSEC module descriptor.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_Init() and when MACSEC is enabled.
-+*//***************************************************************************/
-+t_Error FM_MACSEC_Disable(t_Handle h_FmMacsec);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SetException
-+
-+ @Description   Calling this routine enables/disables the specified exception.
-+
-+ @Param[in]     h_FmMacsec      FM MACSEC module descriptor.
-+ @Param[in]     exception       The exception to be selected.
-+ @Param[in]     enable          TRUE to enable interrupt, FALSE to mask it.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SetException(t_Handle h_FmMacsec, e_FmMacsecExceptions exception, bool enable);
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_DumpRegs
-+
-+ @Description   Dump internal registers.
-+
-+ @Param[in]     h_FmMacsec  - FM MACSEC module descriptor.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only after FM_MACSEC_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_DumpRegs(t_Handle h_FmMacsec);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+#ifdef VERIFICATION_SUPPORT
-+/********************* VERIFICATION ONLY ********************************/
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_BackdoorSet
-+
-+ @Description   Set register of the MACSEC memory map
-+
-+ @Param[in]     h_FmMacsec          FM MACSEC module descriptor.
-+ @Param[out]    offset              Register offset.
-+ @Param[out]    value               Value to write.
-+
-+
-+ @Return        None
-+
-+ @Cautions      Allowed only following FM_MACSEC_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_BackdoorSet(t_Handle h_FmMacsec, uint32_t offset, uint32_t value);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_BackdoorGet
-+
-+ @Description   Read from register of the MACSEC memory map.
-+
-+ @Param[in]     h_FmMacsec          FM MACSEC module descriptor.
-+ @Param[out]    offset              Register offset.
-+
-+ @Return        Value read
-+
-+ @Cautions      Allowed only following FM_MACSEC_Init().
-+*//***************************************************************************/
-+uint32_t FM_MACSEC_BackdoorGet(t_Handle h_FmMacsec, uint32_t offset);
-+#endif /* VERIFICATION_SUPPORT */
-+
-+/** @} */ /* end of FM_MACSEC_runtime_control_grp group */
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_MACSEC_SECY_grp FM-MACSEC SecY
-+
-+ @Description   FM-MACSEC SecY API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+typedef uint8_t     macsecSAKey_t[32];
-+typedef uint64_t    macsecSCI_t;
-+typedef uint8_t     macsecAN_t;
-+
-+/**************************************************************************//**
-+@Description   MACSEC SECY Cipher Suite
-+*//***************************************************************************/
-+typedef enum e_FmMacsecSecYCipherSuite {
-+    e_FM_MACSEC_SECY_GCM_AES_128 = 0,       /**< GCM-AES-128 */
-+#if (DPAA_VERSION >= 11)
-+    e_FM_MACSEC_SECY_GCM_AES_256            /**< GCM-AES-256 */
-+#endif /* (DPAA_VERSION >= 11) */
-+} e_FmMacsecSecYCipherSuite;
-+
-+/**************************************************************************//**
-+ @Description   MACSEC SECY Exceptions
-+*//***************************************************************************/
-+typedef enum e_FmMacsecSecYExceptions {
-+    e_FM_MACSEC_SECY_EX_FRAME_DISCARDED     /**< Frame  Discarded */
-+} e_FmMacsecSecYExceptions;
-+
-+/**************************************************************************//**
-+ @Description   MACSEC SECY Events
-+*//***************************************************************************/
-+typedef enum e_FmMacsecSecYEvents {
-+    e_FM_MACSEC_SECY_EV_NEXT_PN             /**< Next Packet Number exhaustion threshold reached */
-+} e_FmMacsecSecYEvents;
-+
-+/**************************************************************************//**
-+ @Collection   MACSEC SECY Frame Discarded Descriptor error
-+*//***************************************************************************/
-+typedef uint8_t    macsecTxScFrameDiscardedErrSelect_t; /**< typedef for defining Frame Discarded Descriptor errors */
-+
-+#define FM_MACSEC_SECY_TX_SC_FRM_DISCAR_ERR_NEXT_PN_ZERO              0x8000  /**< NextPn == 0 */
-+#define FM_MACSEC_SECY_TX_SC_FRM_DISCAR_ERR_SC_DISBALE                0x4000  /**< SC is disable */
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Function      t_FmMacsecSecYExceptionsCallback
-+
-+ @Description   Exceptions user callback routine, will be called upon an
-+                exception passing the exception identification.
-+
-+ @Param[in]     h_App       A handle to an application layer object; This handle
-+                            will be passed by the driver upon calling this callback.
-+ @Param[in]     exception   The exception.
-+*//***************************************************************************/
-+typedef void (t_FmMacsecSecYExceptionsCallback) ( t_Handle                  h_App,
-+                                                  e_FmMacsecSecYExceptions  exception);
-+
-+/**************************************************************************//**
-+ @Function      t_FmMacsecSecYEventsCallback
-+
-+ @Description   Events user callback routine, will be called upon an
-+                event passing the event identification.
-+
-+ @Param[in]     h_App       A handle to an application layer object; This handle
-+                            will be passed by the driver upon calling this callback.
-+ @Param[in]     event       The event.
-+*//***************************************************************************/
-+typedef void (t_FmMacsecSecYEventsCallback) ( t_Handle                  h_App,
-+                                              e_FmMacsecSecYEvents      event);
-+
-+/**************************************************************************//**
-+ @Description   RFC2863 MIB
-+*//***************************************************************************/
-+typedef struct t_MIBStatistics {
-+    uint64_t  ifInOctets;              /**< Total number of byte received */
-+    uint64_t  ifInPkts;                /**< Total number of packets received */
-+    uint64_t  ifInMcastPkts;           /**< Total number of multicast frame received */
-+    uint64_t  ifInBcastPkts;           /**< Total number of broadcast frame received */
-+    uint64_t  ifInDiscards;            /**< Frames received, but discarded due to problems within the MAC RX :
-+                                               - InPktsNoTag,
-+                                               - InPktsLate,
-+                                               - InPktsOverrun */
-+    uint64_t  ifInErrors;              /**< Number of frames received with error:
-+                                               - InPktsBadTag,
-+                                               - InPktsNoSCI,
-+                                               - InPktsNotUsingSA
-+                                               - InPktsNotValid */
-+    uint64_t  ifOutOctets;             /**< Total number of byte sent */
-+    uint64_t  ifOutPkts;               /**< Total number of packets sent */
-+    uint64_t  ifOutMcastPkts;          /**< Total number of multicast frame sent */
-+    uint64_t  ifOutBcastPkts;          /**< Total number of multicast frame sent */
-+    uint64_t  ifOutDiscards;           /**< Frames received, but discarded due to problems within the MAC TX N/A! */
-+    uint64_t  ifOutErrors;             /**< Number of frames transmitted with error:
-+                                               - FIFO Overflow Error
-+                                               - FIFO Underflow Error
-+                                               - Other */
-+} t_MIBStatistics;
-+
-+/**************************************************************************//**
-+ @Description   MACSEC SecY Rx SA Statistics
-+*//***************************************************************************/
-+typedef struct t_FmMacsecSecYRxSaStatistics {
-+    uint32_t            inPktsOK;               /**< The number of frames with resolved SCI, have passed all
-+                                                     frame validation frame validation with the validateFrame not set to disable */
-+    uint32_t            inPktsInvalid;          /**< The number of frames with resolved SCI, that have failed frame
-+                                                     validation with the validateFrame set to check */
-+    uint32_t            inPktsNotValid;         /**< The number of frames with resolved SCI, discarded on the controlled port,
-+                                                     that have failed frame validation with the validateFrame set to strict or the c bit is set */
-+    uint32_t            inPktsNotUsingSA;       /**< The number of frames received with resolved SCI and discarded on disabled or
-+                                                     not provisioned SA with validateFrame in the strict mode or the C bit is set */
-+    uint32_t            inPktsUnusedSA;         /**< The number of frames received with resolved SCI on disabled or not provisioned SA
-+                                                     with validateFrame not in the strict mode and the C bit is cleared */
-+} t_FmMacsecSecYRxSaStatistics;
-+
-+/**************************************************************************//**
-+ @Description   MACSEC SecY Tx SA Statistics
-+*//***************************************************************************/
-+typedef struct t_FmMacsecSecYTxSaStatistics {
-+    uint64_t            outPktsProtected;       /**< The number of frames, that the user of the controlled port requested to
-+                                                     be transmitted, which were integrity protected */
-+    uint64_t            outPktsEncrypted;       /**< The number of frames, that the user of the controlled port requested to
-+                                                     be transmitted, which were confidentiality protected */
-+} t_FmMacsecSecYTxSaStatistics;
-+
-+/**************************************************************************//**
-+ @Description   MACSEC SecY Rx SC Statistics
-+*//***************************************************************************/
-+typedef struct t_FmMacsecSecYRxScStatistics {
-+    uint64_t            inPktsUnchecked;        /**< The number of frames with resolved SCI, delivered to the user of a controlled port,
-+                                                     that are not validated with the validateFrame set to disable */
-+    uint64_t            inPktsDelayed;          /**< The number of frames with resolved SCI, delivered to the user of a controlled port,
-+                                                     that have their PN smaller than the lowest_PN with the validateFrame set to
-+                                                     disable or replayProtect disabled */
-+    uint64_t            inPktsLate;             /**< The number of frames with resolved SCI, discarded on the controlled port,
-+                                                     that have their PN smaller than the lowest_PN with the validateFrame set to
-+                                                     Check or Strict and replayProtect enabled */
-+    uint64_t            inPktsOK;               /**< The number of frames with resolved SCI, have passed all
-+                                                     frame validation frame validation with the validateFrame not set to disable */
-+    uint64_t            inPktsInvalid;          /**< The number of frames with resolved SCI, that have failed frame
-+                                                     validation with the validateFrame set to check */
-+    uint64_t            inPktsNotValid;         /**< The number of frames with resolved SCI, discarded on the controlled port,
-+                                                     that have failed frame validation with the validateFrame set to strict or the c bit is set */
-+    uint64_t            inPktsNotUsingSA;       /**< The number of frames received with resolved SCI and discarded on disabled or
-+                                                     not provisioned SA with validateFrame in the strict mode or the C bit is set */
-+    uint64_t            inPktsUnusedSA;         /**< The number of frames received with resolved SCI on disabled or not provisioned SA
-+                                                     with validateFrame not in the strict mode and the C bit is cleared */
-+} t_FmMacsecSecYRxScStatistics;
-+
-+/**************************************************************************//**
-+ @Description   MACSEC SecY Tx SC Statistics
-+*//***************************************************************************/
-+typedef struct t_FmMacsecSecYTxScStatistics {
-+    uint64_t            outPktsProtected;       /**< The number of frames, that the user of the controlled port requested to
-+                                                     be transmitted, which were integrity protected */
-+    uint64_t            outPktsEncrypted;       /**< The number of frames, that the user of the controlled port requested to
-+                                                     be transmitted, which were confidentiality protected */
-+} t_FmMacsecSecYTxScStatistics;
-+
-+/**************************************************************************//**
-+ @Description   MACSEC SecY Statistics
-+*//***************************************************************************/
-+typedef struct t_FmMacsecSecYStatistics {
-+    t_MIBStatistics     mibCtrlStatistics;      /**< Controlled port MIB statistics */
-+    t_MIBStatistics     mibNonCtrlStatistics;   /**< Uncontrolled port MIB statistics */
-+/* Frame verification statistics */
-+    uint64_t            inPktsUntagged;         /**< The number of received packets without the MAC security tag
-+                                                     (SecTAG) with validateFrames which is not in the strict mode */
-+    uint64_t            inPktsNoTag;            /**< The number of received packets discarded without the
-+                                                     MAC security tag (SecTAG) with validateFrames which is in the strict mode */
-+    uint64_t            inPktsBadTag;           /**< The number of received packets discarded with an invalid
-+                                                     SecTAG or a zero value PN or an invalid ICV */
-+    uint64_t            inPktsUnknownSCI;       /**< The number of received packets with unknown SCI with the
-+                                                     condition : validateFrames is not in the strict mode and the
-+                                                     C bit in the SecTAG is not set */
-+    uint64_t            inPktsNoSCI;            /**< The number of received packets discarded with unknown SCI
-+                                                     information with the condition : validateFrames is in the strict mode
-+                                                     or the C bit in the SecTAG is set */
-+    uint64_t            inPktsOverrun;          /**< The number of packets discarded because the number of
-+                                                     received packets exceeded the cryptographic performance capabilities */
-+/* Frame validation statistics */
-+    uint64_t            inOctetsValidated;      /**< The number of octets of plaintext recovered from received frames with
-+                                                     resolved SCI that were integrity protected but not encrypted */
-+    uint64_t            inOctetsDecrypted;      /**< The number of octets of plaintext recovered from received frames with
-+                                                     resolved SCI that were integrity protected and encrypted */
-+/* Frame generation statistics */
-+    uint64_t            outPktsUntagged;        /**< The number of frames, that the user of the controlled port requested to
-+                                                     be transmitted, with protectFrame false */
-+    uint64_t            outPktsTooLong;         /**< The number of frames, that the user of the controlled port requested to
-+                                                     be transmitted, discarded due to length being larger than Maximum Frame Length (MACSEC_MFL) */
-+/* Frame protection statistics */
-+    uint64_t            outOctetsProtected;     /**< The number of octets of User Data in transmitted frames that were
-+                                                     integrity protected but not encrypted */
-+    uint64_t            outOctetsEncrypted;     /**< The number of octets of User Data in transmitted frames that were
-+                                                     both integrity protected and encrypted */
-+} t_FmMacsecSecYStatistics;
-+
-+
-+/**************************************************************************//**
-+ @Description   MACSEC SecY SC Params
-+*//***************************************************************************/
-+typedef struct t_FmMacsecSecYSCParams {
-+    macsecSCI_t                 sci;            /**< The secure channel identification of the SC */
-+    e_FmMacsecSecYCipherSuite   cipherSuite;    /**< Cipher suite to be used for the SC */
-+} t_FmMacsecSecYSCParams;
-+
-+/**************************************************************************//**
-+ @Group         FM_MACSEC_SECY_init_grp FM-MACSEC SecY Initialization Unit
-+
-+ @Description   FM-MACSEC SecY Initialization Unit
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   enum for validate frames
-+*//***************************************************************************/
-+typedef enum e_FmMacsecValidFrameBehavior {
-+    e_FM_MACSEC_VALID_FRAME_BEHAVIOR_DISABLE = 0,   /**< disable the validation function */
-+    e_FM_MACSEC_VALID_FRAME_BEHAVIOR_CHECK,         /**< enable the validation function but only for checking
-+                                                         without filtering out invalid frames */
-+    e_FM_MACSEC_VALID_FRAME_BEHAVIOR_STRICT         /**< enable the validation function and also strictly filter
-+                                                         out those invalid frames */
-+} e_FmMacsecValidFrameBehavior;
-+
-+/**************************************************************************//**
-+ @Description   enum for sci insertion
-+*//***************************************************************************/
-+typedef enum e_FmMacsecSciInsertionMode {
-+    e_FM_MACSEC_SCI_INSERTION_MODE_EXPLICIT_SECTAG = 0, /**< explicit sci in the sectag */
-+    e_FM_MACSEC_SCI_INSERTION_MODE_EXPLICIT_MAC_SA,     /**< mac sa is overwritten with the sci*/
-+    e_FM_MACSEC_SCI_INSERTION_MODE_IMPLICT_PTP          /**< implicit point-to-point sci (pre-shared) */
-+} e_FmMacsecSciInsertionMode;
-+
-+/**************************************************************************//**
-+ @Description   FM MACSEC SecY config input
-+*//***************************************************************************/
-+typedef struct t_FmMacsecSecYParams {
-+    t_Handle                                    h_FmMacsec;             /**< A handle to the FM MACSEC object */
-+    t_FmMacsecSecYSCParams                      txScParams;             /**< Tx SC Params */
-+    uint32_t                                    numReceiveChannels;     /**< Number of receive channels dedicated to this SecY */
-+    t_FmMacsecSecYExceptionsCallback            *f_Exception;           /**< Callback routine to be called by the driver upon SecY exception */
-+    t_FmMacsecSecYEventsCallback                *f_Event;               /**< Callback routine to be called by the driver upon SecY event */
-+    t_Handle                                    h_App;                  /**< A handle to an application layer object; This handle will
-+                                                                             be passed by the driver upon calling the above callbacks */
-+} t_FmMacsecSecYParams;
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_Config
-+
-+ @Description   Creates descriptor for the FM MACSEC SECY module;
-+
-+                The routine returns a handle (descriptor) to the FM MACSEC SECY object;
-+                This descriptor must be passed as first parameter to all other
-+                FM MACSEC SECY function calls;
-+                No actual initialization or configuration of FM MACSEC SecY hardware is
-+                done by this routine.
-+
-+ @Param[in]     p_FmMacsecSecYParam     Pointer to data structure of parameters.
-+
-+ @Return        Handle to FM MACSEC SECY object, or NULL for Failure.
-+*//***************************************************************************/
-+t_Handle FM_MACSEC_SECY_Config(t_FmMacsecSecYParams *p_FmMacsecSecYParam);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_Init
-+
-+ @Description   Initializes the FM MACSEC SECY module.
-+
-+ @Param[in]     h_FmMacsecSecY  FM MACSEC SECY module descriptor.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_Init(t_Handle h_FmMacsecSecY);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_Free
-+
-+ @Description   Frees all resources that were assigned to FM MACSEC SECY module.
-+
-+                Calling this routine invalidates the descriptor.
-+
-+ @Param[in]     h_FmMacsecSecY  FM MACSEC SECY module descriptor.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_Free(t_Handle h_FmMacsecSecY);
-+
-+/**************************************************************************//**
-+ @Group         FM_MACSEC_SECY_advanced_init_grp  FM-MACSEC SecY Advanced Configuration Unit
-+
-+ @Description   Configuration functions used to change default values.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_ConfigSciInsertionMode
-+
-+ @Description   Calling this routine changes the SCI-insertion-mode in the
-+                internal driver data base from its default configuration
-+                [DEFAULT_sciInsertionMode]
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     sciInsertionMode    Sci insertion mode
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init();
-+
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_ConfigSciInsertionMode(t_Handle h_FmMacsecSecY, e_FmMacsecSciInsertionMode sciInsertionMode);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_ConfigProtectFrames
-+
-+ @Description   Calling this routine changes the protect-frame mode in the
-+                internal driver data base from its default configuration
-+                [DEFAULT_protectFrames]
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     protectFrames       If FALSE, frames are transmitted without modification
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init();
-+
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_ConfigProtectFrames(t_Handle h_FmMacsecSecY, bool protectFrames);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_ConfigReplayWindow
-+
-+ @Description   Calling this routine changes the replay-window settings in the
-+                internal driver data base from its default configuration
-+                [DEFAULT_replayEnable], [DEFAULT_replayWindow]
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     replayProtect;      Replay protection function mode
-+ @Param[in]     replayWindow;       The size of the replay window
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init();
-+
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_ConfigReplayWindow(t_Handle h_FmMacsecSecY, bool replayProtect, uint32_t replayWindow);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_ConfigValidationMode
-+
-+ @Description   Calling this routine changes the frame-validation-behavior mode
-+                in the internal driver data base from its default configuration
-+                [DEFAULT_validateFrames]
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     validateFrames      Validation function mode
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init();
-+
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_ConfigValidationMode(t_Handle h_FmMacsecSecY, e_FmMacsecValidFrameBehavior validateFrames);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_ConfigConfidentiality
-+
-+ @Description   Calling this routine changes the confidentiality settings in the
-+                internal driver data base from its default configuration
-+                [DEFAULT_confidentialityEnable], [DEFAULT_confidentialityOffset]
-+
-+ @Param[in]     h_FmMacsecSecY          FM MACSEC SECY module descriptor.
-+ @Param[in]     confidentialityEnable   TRUE  - confidentiality protection and integrity protection
-+                                        FALSE - no confidentiality protection, only integrity protection
-+ @Param[in]     confidentialityOffset   The number of initial octets of each MSDU without confidentiality protection
-+                                        common values are 0, 30, and 50
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init();
-+
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_ConfigConfidentiality(t_Handle h_FmMacsecSecY, bool confidentialityEnable, uint16_t confidentialityOffset);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_ConfigPointToPoint
-+
-+ @Description   configure this SecY to work in point-to-point mode, means that
-+                it will have only one rx sc;
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init();
-+                Can be called only once in a system; only the first secY that will call this
-+                routine will be able to operate in Point-To-Point mode.
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_ConfigPointToPoint(t_Handle h_FmMacsecSecY);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_ConfigException
-+
-+ @Description   Calling this routine changes the internal driver data base
-+                from its default selection of exceptions enablement;
-+                By default all exceptions are enabled.
-+
-+ @Param[in]     h_FmMacsecSecY  FM MACSEC SECY module descriptor.
-+ @Param[in]     exception       The exception to be selected.
-+ @Param[in]     enable          TRUE to enable interrupt, FALSE to mask it.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_ConfigException(t_Handle h_FmMacsecSecY, e_FmMacsecSecYExceptions exception, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_ConfigEvent
-+
-+ @Description   Calling this routine changes the internal driver data base
-+                from its default selection of events enablement;
-+                By default all events are enabled.
-+
-+ @Param[in]     h_FmMacsecSecY  FM MACSEC SECY module descriptor.
-+ @Param[in]     event           The event to be selected.
-+ @Param[in]     enable          TRUE to enable interrupt, FALSE to mask it.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_ConfigEvent(t_Handle h_FmMacsecSecY, e_FmMacsecSecYEvents event, bool enable);
-+
-+/** @} */ /* end of FM_MACSEC_SECY_advanced_init_grp group */
-+/** @} */ /* end of FM_MACSEC_SECY_init_grp group */
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_MACSEC_SECY_runtime_control_grp FM-MACSEC SecY Runtime Control Unit
-+
-+ @Description   FM MACSEC SECY Runtime control unit API functions, definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_CreateRxSc
-+
-+ @Description   Create a receive secure channel.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     scParams            secure channel params.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Handle FM_MACSEC_SECY_CreateRxSc(t_Handle h_FmMacsecSecY, t_FmMacsecSecYSCParams *p_ScParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_DeleteRxSc
-+
-+ @Description   Deleting an initialized secure channel.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     h_Sc                SC handle as returned by FM_MACSEC_SECY_CreateRxSc.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_CreateRxSc().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_DeleteRxSc(t_Handle h_FmMacsecSecY, t_Handle h_Sc);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_CreateRxSa
-+
-+ @Description   Create a receive secure association for the secure channel;
-+                the SA cannot be used to receive frames until FM_MACSEC_SECY_RxSaEnableReceive is called.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     h_Sc                SC handle as returned by FM_MACSEC_SECY_CreateRxSc.
-+ @Param[in]     an                  association number represent the SA.
-+ @Param[in]     lowestPn            the lowest acceptable PN value for a received frame.
-+ @Param[in]     key                 the desired key for this SA.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_CreateRxSc().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_CreateRxSa(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an, uint32_t lowestPn, macsecSAKey_t key);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_DeleteRxSa
-+
-+ @Description   Deleting an initialized secure association.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     h_Sc                SC handle as returned by FM_MACSEC_SECY_CreateRxSc.
-+ @Param[in]     an                  association number represent the SA.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_DeleteRxSa(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_RxSaEnableReceive
-+
-+ @Description   Enabling the SA to receive frames.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     h_Sc                SC handle as returned by FM_MACSEC_SECY_CreateRxSc.
-+ @Param[in]     an                  association number represent the SA.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_CreateRxSa().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_RxSaEnableReceive(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_RxSaDisableReceive
-+
-+ @Description   Disabling the SA from receive frames.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     h_Sc                SC handle as returned by FM_MACSEC_SECY_CreateRxSc.
-+ @Param[in]     an                  association number represent the SA.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_CreateRxSa().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_RxSaDisableReceive(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_RxSaUpdateNextPn
-+
-+ @Description   Update the next packet number expected on RX;
-+                The value of nextPN shall be set to the greater of its existing value and the
-+                supplied of updtNextPN (802.1AE-2006 10.7.15).
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     h_Sc                SC handle as returned by FM_MACSEC_SECY_CreateRxSc.
-+ @Param[in]     an                  association number represent the SA.
-+ @Param[in]     updtNextPN          the next PN value for a received frame.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_CreateRxSa().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_RxSaUpdateNextPn(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an, uint32_t updtNextPN);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_RxSaUpdateLowestPn
-+
-+ @Description   Update the lowest packet number expected on RX;
-+                The value of lowestPN shall be set to the greater of its existing value and the
-+                supplied of updtLowestPN (802.1AE-2006 10.7.15).
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     h_Sc                SC handle as returned by FM_MACSEC_SECY_CreateRxSc.
-+ @Param[in]     an                  association number represent the SA.
-+ @Param[in]     updtLowestPN        the lowest PN acceptable value for a received frame.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_CreateRxSa().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_RxSaUpdateLowestPn(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an, uint32_t updtLowestPN);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_RxSaModifyKey
-+
-+ @Description   Modify the current key of the SA with a new one.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     h_Sc                SC handle as returned by FM_MACSEC_SECY_CreateRxSc.
-+ @Param[in]     an                  association number represent the SA.
-+ @Param[in]     key                 new key to replace the current key.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_CreateRxSa().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_RxSaModifyKey(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an, macsecSAKey_t key);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_CreateTxSa
-+
-+ @Description   Create a transmit secure association for the secure channel;
-+                the SA cannot be used to transmit frames until FM_MACSEC_SECY_TxSaSetActivate is called;
-+                Only one SA can be active at a time.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     an                  association number represent the SA.
-+ @Param[in]     key                 the desired key for this SA.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_CreateTxSa(t_Handle h_FmMacsecSecY, macsecAN_t an, macsecSAKey_t key);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_DeleteTxSa
-+
-+ @Description   Deleting an initialized secure association.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     an                  association number represent the SA.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_DeleteTxSa(t_Handle h_FmMacsecSecY, macsecAN_t an);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_TxSaModifyKey
-+
-+ @Description   Modify the key of the inactive SA with a new one.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     nextActiveAn        association number represent the next SA to be activated.
-+ @Param[in]     key                 new key to replace the current key.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_TxSaModifyKey(t_Handle h_FmMacsecSecY, macsecAN_t nextActiveAn, macsecSAKey_t key);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_TxSaSetActive
-+
-+ @Description   Set this SA to the active SA to be used on TX for SC;
-+                only one SA can be active at a time.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     an                  association number represent the SA.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_TxSaSetActive(t_Handle h_FmMacsecSecY, macsecAN_t an);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_TxSaGetActive
-+
-+ @Description   Get the active SA that being used for TX.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[out]    p_An                the active an.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_TxSaGetActive(t_Handle h_FmMacsecSecY, macsecAN_t *p_An);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_GetStatistics
-+
-+ @Description   get all statistics counters.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     p_Statistics        Structure with statistics.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_GetStatistics(t_Handle h_FmMacsecSecY, t_FmMacsecSecYStatistics *p_Statistics);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_RxScGetStatistics
-+
-+ @Description   get all statistics counters.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     h_Sc                Rx Sc handle.
-+ @Param[in]     p_Statistics        Structure with statistics.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_RxScGetStatistics(t_Handle h_FmMacsecSecY, t_Handle h_Sc, t_FmMacsecSecYRxScStatistics *p_Statistics);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_RxSaGetStatistics
-+
-+ @Description   get all statistics counters
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     h_Sc                Rx Sc handle.
-+ @Param[in]     an                  association number represent the SA.
-+ @Param[in]     p_Statistics        Structure with statistics.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_RxSaGetStatistics(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an, t_FmMacsecSecYRxSaStatistics *p_Statistics);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_TxScGetStatistics
-+
-+ @Description   get all statistics counters.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     p_Statistics        Structure with statistics.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_TxScGetStatistics(t_Handle h_FmMacsecSecY, t_FmMacsecSecYTxScStatistics *p_Statistics);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_TxSaGetStatistics
-+
-+ @Description   get all statistics counters.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     an                  association number represent the SA.
-+ @Param[in]     p_Statistics        Structure with statistics.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_TxSaGetStatistics(t_Handle h_FmMacsecSecY, macsecAN_t an, t_FmMacsecSecYTxSaStatistics *p_Statistics);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_SetException
-+
-+ @Description   Calling this routine enables/disables the specified exception.
-+
-+ @Param[in]     h_FmMacsecSecY  FM MACSEC SECY module descriptor.
-+ @Param[in]     exception       The exception to be selected.
-+ @Param[in]     enable          TRUE to enable interrupt, FALSE to mask it.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_SetException(t_Handle h_FmMacsecSecY, e_FmMacsecExceptions exception, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_SetEvent
-+
-+ @Description   Calling this routine enables/disables the specified event.
-+
-+ @Param[in]     h_FmMacsecSecY  FM MACSEC SECY module descriptor.
-+ @Param[in]     event           The event to be selected.
-+ @Param[in]     enable          TRUE to enable interrupt, FALSE to mask it.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_SetEvent(t_Handle h_FmMacsecSecY, e_FmMacsecSecYEvents event, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_GetRxScPhysId
-+
-+ @Description   return the physical id of the Secure Channel.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[in]     h_Sc                SC handle as returned by FM_MACSEC_SECY_CreateRxSc.
-+ @Param[out]    p_ScPhysId          the SC physical id.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_CreateRxSc().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_GetRxScPhysId(t_Handle h_FmMacsecSecY, t_Handle h_Sc, uint32_t *p_ScPhysId);
-+
-+/**************************************************************************//**
-+ @Function      FM_MACSEC_SECY_GetTxScPhysId
-+
-+ @Description   return the physical id of the Secure Channel.
-+
-+ @Param[in]     h_FmMacsecSecY      FM MACSEC SECY module descriptor.
-+ @Param[out]    p_ScPhysId          the SC physical id.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MACSEC_SECY_Init().
-+*//***************************************************************************/
-+t_Error FM_MACSEC_SECY_GetTxScPhysId(t_Handle h_FmMacsecSecY, uint32_t *p_ScPhysId);
-+
-+/** @} */ /* end of FM_MACSEC_SECY_runtime_control_grp group */
-+/** @} */ /* end of FM_MACSEC_SECY_grp group */
-+/** @} */ /* end of FM_MACSEC_grp group */
-+/** @} */ /* end of FM_grp group */
-+
-+
-+#endif /* __FM_MACSEC_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_muram_ext.h
-@@ -0,0 +1,170 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          fm_muram_ext.h
-+
-+ @Description   FM MURAM Application Programming Interface.
-+*//***************************************************************************/
-+#ifndef __FM_MURAM_EXT
-+#define __FM_MURAM_EXT
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+
-+
-+/**************************************************************************//**
-+
-+ @Group         FM_grp Frame Manager API
-+
-+ @Description   FM API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         FM_muram_grp FM MURAM
-+
-+ @Description   FM MURAM API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         FM_muram_init_grp FM MURAM Initialization Unit
-+
-+ @Description   FM MURAM initialization API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      FM_MURAM_ConfigAndInit
-+
-+ @Description   Creates partition in the MURAM.
-+
-+                The routine returns a handle (descriptor) to the MURAM partition.
-+                This descriptor must be passed as first parameter to all other
-+                FM-MURAM function calls.
-+
-+                No actual initialization or configuration of FM_MURAM hardware is
-+                done by this routine.
-+
-+ @Param[in]     baseAddress - Pointer to base of memory mapped FM-MURAM.
-+ @Param[in]     size        - Size of the FM-MURAM partition.
-+
-+ @Return        Handle to FM-MURAM object, or NULL for Failure.
-+*//***************************************************************************/
-+t_Handle FM_MURAM_ConfigAndInit(uintptr_t baseAddress, uint32_t size);
-+
-+/**************************************************************************//**
-+ @Function      FM_MURAM_Free
-+
-+ @Description   Frees all resources that were assigned to FM-MURAM module.
-+
-+                Calling this routine invalidates the descriptor.
-+
-+ @Param[in]     h_FmMuram - FM-MURAM module descriptor.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error  FM_MURAM_Free(t_Handle h_FmMuram);
-+
-+/** @} */ /* end of FM_muram_init_grp group */
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_muram_ctrl_grp FM MURAM Control Unit
-+
-+ @Description   FM MURAM control API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      FM_MURAM_AllocMem
-+
-+ @Description   Allocate some memory from FM-MURAM partition.
-+
-+ @Param[in]     h_FmMuram - FM-MURAM module descriptor.
-+ @Param[in]     size      - size of the memory to be allocated.
-+ @Param[in]     align     - Alignment of the memory.
-+
-+ @Return        address of the allocated memory; NULL otherwise.
-+*//***************************************************************************/
-+void  * FM_MURAM_AllocMem(t_Handle h_FmMuram, uint32_t size, uint32_t align);
-+
-+/**************************************************************************//**
-+ @Function      FM_MURAM_AllocMemForce
-+
-+ @Description   Allocate some specific memory from FM-MURAM partition (according
-+                to base).
-+
-+ @Param[in]     h_FmMuram - FM-MURAM module descriptor.
-+ @Param[in]     base      - the desired base-address to be allocated.
-+ @Param[in]     size      - size of the memory to be allocated.
-+
-+ @Return        address of the allocated memory; NULL otherwise.
-+*//***************************************************************************/
-+void  * FM_MURAM_AllocMemForce(t_Handle h_FmMuram, uint64_t base, uint32_t size);
-+
-+/**************************************************************************//**
-+ @Function      FM_MURAM_FreeMem
-+
-+ @Description   Free an allocated memory from FM-MURAM partition.
-+
-+ @Param[in]     h_FmMuram - FM-MURAM module descriptor.
-+ @Param[in]     ptr       - A pointer to an allocated memory.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_MURAM_FreeMem(t_Handle h_FmMuram, void *ptr);
-+
-+/**************************************************************************//**
-+ @Function      FM_MURAM_GetFreeMemSize
-+
-+ @Description   Returns the size (in bytes) of free MURAM memory.
-+
-+ @Param[in]     h_FmMuram - FM-MURAM module descriptor.
-+
-+ @Return        Free MURAM memory size in bytes.
-+*//***************************************************************************/
-+uint64_t FM_MURAM_GetFreeMemSize(t_Handle h_FmMuram);
-+
-+/** @} */ /* end of FM_muram_ctrl_grp group */
-+/** @} */ /* end of FM_muram_grp group */
-+/** @} */ /* end of FM_grp group */
-+
-+
-+
-+#endif /* __FM_MURAM_EXT */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_pcd_ext.h
-@@ -0,0 +1,3974 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          fm_pcd_ext.h
-+
-+ @Description   FM PCD API definitions
-+*//***************************************************************************/
-+#ifndef __FM_PCD_EXT
-+#define __FM_PCD_EXT
-+
-+#include "std_ext.h"
-+#include "net_ext.h"
-+#include "list_ext.h"
-+#include "fm_ext.h"
-+#include "fsl_fman_kg.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_grp Frame Manager API
-+
-+ @Description   Frame Manager Application Programming Interface
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         FM_PCD_grp FM PCD
-+
-+ @Description   Frame Manager PCD (Parse-Classify-Distribute) API.
-+
-+                The FM PCD module is responsible for the initialization of all
-+                global classifying FM modules. This includes the parser general and
-+                common registers, the key generator global and common registers,
-+                and the policer global and common registers.
-+                In addition, the FM PCD SW module will initialize all required
-+                key generator schemes, coarse classification flows, and policer
-+                profiles. When FM module is configured to work with one of these
-+                entities, it will register to it using the FM PORT API. The PCD
-+                module will manage the PCD resources - i.e. resource management of
-+                KeyGen schemes, etc.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Collection    General PCD defines
-+*//***************************************************************************/
-+#define FM_PCD_MAX_NUM_OF_PRIVATE_HDRS              2                   /**< Number of units/headers saved for user */
-+
-+#define FM_PCD_PRS_NUM_OF_HDRS                      16                  /**< Number of headers supported by HW parser */
-+#define FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS         (32 - FM_PCD_MAX_NUM_OF_PRIVATE_HDRS)
-+                                                                        /**< Number of distinction units is limited by
-+                                                                             register size (32 bits) minus reserved bits
-+                                                                             for private headers. */
-+#define FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS      4                   /**< Maximum number of interchangeable headers
-+                                                                             in a distinction unit */
-+#define FM_PCD_KG_NUM_OF_GENERIC_REGS               FM_KG_NUM_OF_GENERIC_REGS /**< Total number of generic KeyGen registers */
-+#define FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY       35                  /**< Max number allowed on any configuration;
-+                                                                             For HW implementation reasons, in most
-+                                                                             cases less than this will be allowed; The
-+                                                                             driver will return an initialization error
-+                                                                             if resource is unavailable. */
-+#define FM_PCD_KG_NUM_OF_EXTRACT_MASKS              4                   /**< Total number of masks allowed on KeyGen extractions. */
-+#define FM_PCD_KG_NUM_OF_DEFAULT_GROUPS             16                  /**< Number of default value logical groups */
-+
-+#define FM_PCD_PRS_NUM_OF_LABELS                    32                  /**< Maximum number of SW parser labels */
-+#define FM_SW_PRS_MAX_IMAGE_SIZE                    (FM_PCD_SW_PRS_SIZE /*- FM_PCD_PRS_SW_OFFSET -FM_PCD_PRS_SW_TAIL_SIZE*/-FM_PCD_PRS_SW_PATCHES_SIZE)
-+                                                                        /**< Maximum size of SW parser code */
-+
-+#define FM_PCD_MAX_MANIP_INSRT_TEMPLATE_SIZE        128                 /**< Maximum size of insertion template for
-+                                                                             insert manipulation */
-+
-+#if (DPAA_VERSION >= 11)
-+#define FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES        64                  /**< Maximum possible entries for frame replicator group */
-+#endif /* (DPAA_VERSION >= 11) */
-+/* @} */
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_PCD_init_grp FM PCD Initialization Unit
-+
-+ @Description   Frame Manager PCD Initialization Unit API
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   PCD counters
-+*//***************************************************************************/
-+typedef enum e_FmPcdCounters {
-+    e_FM_PCD_KG_COUNTERS_TOTAL,                                 /**< KeyGen counter */
-+    e_FM_PCD_PLCR_COUNTERS_RED,                                 /**< Policer counter - counts the total number of RED packets that exit the Policer. */
-+    e_FM_PCD_PLCR_COUNTERS_YELLOW,                              /**< Policer counter - counts the total number of YELLOW packets that exit the Policer. */
-+    e_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_RED,                    /**< Policer counter - counts the number of packets that changed color to RED by the Policer;
-+                                                                     This is a subset of e_FM_PCD_PLCR_COUNTERS_RED packet count, indicating active color changes. */
-+    e_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_YELLOW,                 /**< Policer counter - counts the number of packets that changed color to YELLOW by the Policer;
-+                                                                     This is a subset of e_FM_PCD_PLCR_COUNTERS_YELLOW packet count, indicating active color changes. */
-+    e_FM_PCD_PLCR_COUNTERS_TOTAL,                               /**< Policer counter - counts the total number of packets passed in the Policer. */
-+    e_FM_PCD_PLCR_COUNTERS_LENGTH_MISMATCH,                     /**< Policer counter - counts the number of packets with length mismatch. */
-+    e_FM_PCD_PRS_COUNTERS_PARSE_DISPATCH,                       /**< Parser counter - counts the number of times the parser block is dispatched. */
-+    e_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED,             /**< Parser counter - counts the number of times L2 parse result is returned (including errors). */
-+    e_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED,             /**< Parser counter - counts the number of times L3 parse result is returned (including errors). */
-+    e_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED,             /**< Parser counter - counts the number of times L4 parse result is returned (including errors). */
-+    e_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED,           /**< Parser counter - counts the number of times SHIM parse result is returned (including errors). */
-+    e_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED_WITH_ERR,    /**< Parser counter - counts the number of times L2 parse result is returned with errors. */
-+    e_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED_WITH_ERR,    /**< Parser counter - counts the number of times L3 parse result is returned with errors. */
-+    e_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED_WITH_ERR,    /**< Parser counter - counts the number of times L4 parse result is returned with errors. */
-+    e_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED_WITH_ERR,  /**< Parser counter - counts the number of times SHIM parse result is returned with errors. */
-+    e_FM_PCD_PRS_COUNTERS_SOFT_PRS_CYCLES,                      /**< Parser counter - counts the number of cycles spent executing soft parser instruction (including stall cycles). */
-+    e_FM_PCD_PRS_COUNTERS_SOFT_PRS_STALL_CYCLES,                /**< Parser counter - counts the number of cycles stalled waiting for parser internal memory reads while executing soft parser instruction. */
-+    e_FM_PCD_PRS_COUNTERS_HARD_PRS_CYCLE_INCL_STALL_CYCLES,     /**< Parser counter - counts the number of cycles spent executing hard parser (including stall cycles). */
-+    e_FM_PCD_PRS_COUNTERS_MURAM_READ_CYCLES,                    /**< MURAM counter - counts the number of cycles while performing FMan Memory read. */
-+    e_FM_PCD_PRS_COUNTERS_MURAM_READ_STALL_CYCLES,              /**< MURAM counter - counts the number of cycles stalled while performing FMan Memory read. */
-+    e_FM_PCD_PRS_COUNTERS_MURAM_WRITE_CYCLES,                   /**< MURAM counter - counts the number of cycles while performing FMan Memory write. */
-+    e_FM_PCD_PRS_COUNTERS_MURAM_WRITE_STALL_CYCLES,             /**< MURAM counter - counts the number of cycles stalled while performing FMan Memory write. */
-+    e_FM_PCD_PRS_COUNTERS_FPM_COMMAND_STALL_CYCLES              /**< FPM counter - counts the number of cycles stalled while performing a FPM Command. */
-+} e_FmPcdCounters;
-+
-+/**************************************************************************//**
-+ @Description   PCD interrupts
-+*//***************************************************************************/
-+typedef enum e_FmPcdExceptions {
-+    e_FM_PCD_KG_EXCEPTION_DOUBLE_ECC,                   /**< KeyGen double-bit ECC error is detected on internal memory read access. */
-+    e_FM_PCD_KG_EXCEPTION_KEYSIZE_OVERFLOW,             /**< KeyGen scheme configuration error indicating a key size larger than 56 bytes. */
-+    e_FM_PCD_PLCR_EXCEPTION_DOUBLE_ECC,                 /**< Policer double-bit ECC error has been detected on PRAM read access. */
-+    e_FM_PCD_PLCR_EXCEPTION_INIT_ENTRY_ERROR,           /**< Policer access to a non-initialized profile has been detected. */
-+    e_FM_PCD_PLCR_EXCEPTION_PRAM_SELF_INIT_COMPLETE,    /**< Policer RAM self-initialization complete */
-+    e_FM_PCD_PLCR_EXCEPTION_ATOMIC_ACTION_COMPLETE,     /**< Policer atomic action complete */
-+    e_FM_PCD_PRS_EXCEPTION_DOUBLE_ECC,                  /**< Parser double-bit ECC error */
-+    e_FM_PCD_PRS_EXCEPTION_SINGLE_ECC                   /**< Parser single-bit ECC error */
-+} e_FmPcdExceptions;
-+
-+
-+/**************************************************************************//**
-+ @Description   Exceptions user callback routine, will be called upon an
-+                exception passing the exception identification.
-+
-+ @Param[in]     h_App      - User's application descriptor.
-+ @Param[in]     exception  - The exception.
-+  *//***************************************************************************/
-+typedef void (t_FmPcdExceptionCallback) (t_Handle h_App, e_FmPcdExceptions exception);
-+
-+/**************************************************************************//**
-+ @Description   Exceptions user callback routine, will be called upon an exception
-+                passing the exception identification.
-+
-+ @Param[in]     h_App           - User's application descriptor.
-+ @Param[in]     exception       - The exception.
-+ @Param[in]     index           - id of the relevant source (may be scheme or profile id).
-+ *//***************************************************************************/
-+typedef void (t_FmPcdIdExceptionCallback) ( t_Handle           h_App,
-+                                            e_FmPcdExceptions  exception,
-+                                            uint16_t           index);
-+
-+/**************************************************************************//**
-+ @Description   A callback for enqueuing frame onto a QM queue.
-+
-+ @Param[in]     h_QmArg         - Application's handle passed to QM module on enqueue.
-+ @Param[in]     p_Fd            - Frame descriptor for the frame.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+ *//***************************************************************************/
-+typedef t_Error (t_FmPcdQmEnqueueCallback) (t_Handle h_QmArg, void *p_Fd);
-+
-+/**************************************************************************//**
-+ @Description   Host-Command parameters structure.
-+
-+                When using Host command for PCD functionalities, a dedicated port
-+                must be used. If this routine is called for a PCD in a single partition
-+                environment, or it is the Master partition in a Multi-partition
-+                environment, The port will be initialized by the PCD driver
-+                initialization routine.
-+ *//***************************************************************************/
-+typedef struct t_FmPcdHcParams {
-+    uintptr_t                   portBaseAddr;       /**< Virtual Address of Host-Command Port memory mapped registers.*/
-+    uint8_t                     portId;             /**< Port Id (0-6 relative to Host-Command/Offline-Parsing ports);
-+                                                         NOTE: When configuring Host Command port for
-+                                                         FMANv3 devices (DPAA_VERSION 11 and higher),
-+                                                         portId=0 MUST be used. */
-+    uint16_t                    liodnBase;          /**< LIODN base for this port, to be used together with LIODN offset
-+                                                         (irrelevant for P4080 revision 1.0) */
-+    uint32_t                    errFqid;            /**< Host-Command Port error queue Id. */
-+    uint32_t                    confFqid;           /**< Host-Command Port confirmation queue Id. */
-+    uint32_t                    qmChannel;          /**< QM channel dedicated to this Host-Command port;
-+                                                         will be used by the FM for dequeue. */
-+    t_FmPcdQmEnqueueCallback    *f_QmEnqueue;       /**< Callback routine for enqueuing a frame to the QM */
-+    t_Handle                    h_QmArg;            /**< Application's handle passed to QM module on enqueue */
-+} t_FmPcdHcParams;
-+
-+/**************************************************************************//**
-+ @Description   The main structure for PCD initialization
-+ *//***************************************************************************/
-+typedef struct t_FmPcdParams {
-+    bool                        prsSupport;             /**< TRUE if Parser will be used for any of the FM ports. */
-+    bool                        ccSupport;              /**< TRUE if Coarse Classification will be used for any
-+                                                             of the FM ports. */
-+    bool                        kgSupport;              /**< TRUE if KeyGen will be used for any of the FM ports. */
-+    bool                        plcrSupport;            /**< TRUE if Policer will be used for any of the FM ports. */
-+    t_Handle                    h_Fm;                   /**< A handle to the FM module. */
-+    uint8_t                     numOfSchemes;           /**< Number of schemes dedicated to this partition.
-+                                                             this parameter is relevant if 'kgSupport'=TRUE. */
-+    bool                        useHostCommand;         /**< Optional for single partition, Mandatory for Multi partition */
-+    t_FmPcdHcParams             hc;                     /**< Host Command parameters, relevant only if 'useHostCommand'=TRUE;
-+                                                             Relevant when FM not runs in "guest-mode". */
-+
-+    t_FmPcdExceptionCallback    *f_Exception;           /**< Callback routine for general PCD exceptions;
-+                                                             Relevant when FM not runs in "guest-mode". */
-+    t_FmPcdIdExceptionCallback  *f_ExceptionId;         /**< Callback routine for specific KeyGen scheme or
-+                                                             Policer profile exceptions;
-+                                                             Relevant when FM not runs in "guest-mode". */
-+    t_Handle                    h_App;                  /**< A handle to an application layer object; This handle will
-+                                                             be passed by the driver upon calling the above callbacks;
-+                                                             Relevant when FM not runs in "guest-mode". */
-+    uint8_t                     partPlcrProfilesBase;   /**< The first policer-profile-id dedicated to this partition.
-+                                                             this parameter is relevant if 'plcrSupport'=TRUE.
-+                                                             NOTE: this parameter relevant only when working with multiple partitions. */
-+    uint16_t                    partNumOfPlcrProfiles;  /**< Number of policer-profiles dedicated to this partition.
-+                                                             this parameter is relevant if 'plcrSupport'=TRUE.
-+                                                             NOTE: this parameter relevant only when working with multiple partitions. */
-+} t_FmPcdParams;
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_Config
-+
-+ @Description   Basic configuration of the PCD module.
-+                Creates descriptor for the FM PCD module.
-+
-+ @Param[in]     p_FmPcdParams    A structure of parameters for the initialization of PCD.
-+
-+ @Return        A handle to the initialized module.
-+*//***************************************************************************/
-+t_Handle FM_PCD_Config(t_FmPcdParams *p_FmPcdParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_Init
-+
-+ @Description   Initialization of the PCD module.
-+
-+ @Param[in]     h_FmPcd - FM PCD module descriptor.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_PCD_Init(t_Handle h_FmPcd);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_Free
-+
-+ @Description   Frees all resources that were assigned to FM module.
-+
-+                Calling this routine invalidates the descriptor.
-+
-+ @Param[in]     h_FmPcd - FM PCD module descriptor.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_PCD_Free(t_Handle h_FmPcd);
-+
-+/**************************************************************************//**
-+ @Group         FM_PCD_advanced_cfg_grp    FM PCD Advanced Configuration Unit
-+
-+ @Description   Frame Manager PCD Advanced Configuration API.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ConfigException
-+
-+ @Description   Calling this routine changes the internal driver data base
-+                from its default selection of exceptions enabling.
-+                [DEFAULT_numOfSharedPlcrProfiles].
-+
-+ @Param[in]     h_FmPcd         FM PCD module descriptor.
-+ @Param[in]     exception       The exception to be selected.
-+ @Param[in]     enable          TRUE to enable interrupt, FALSE to mask it.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_PCD_ConfigException(t_Handle h_FmPcd, e_FmPcdExceptions exception, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ConfigHcFramesDataMemory
-+
-+ @Description   Configures memory-partition-id for FMan-Controller Host-Command
-+                frames. Calling this routine changes the internal driver data
-+                base from its default configuration [0].
-+
-+ @Param[in]     h_FmPcd         FM PCD module descriptor.
-+ @Param[in]     memId           Memory partition ID.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      This routine may be called only if 'useHostCommand' was TRUE
-+                when FM_PCD_Config() routine was called.
-+*//***************************************************************************/
-+t_Error FM_PCD_ConfigHcFramesDataMemory(t_Handle h_FmPcd, uint8_t memId);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ConfigPlcrNumOfSharedProfiles
-+
-+ @Description   Calling this routine changes the internal driver data base
-+                from its default selection of exceptions enablement.
-+                [DEFAULT_numOfSharedPlcrProfiles].
-+
-+ @Param[in]     h_FmPcd                     FM PCD module descriptor.
-+ @Param[in]     numOfSharedPlcrProfiles     Number of profiles to
-+                                            be shared between ports on this partition
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_PCD_ConfigPlcrNumOfSharedProfiles(t_Handle h_FmPcd, uint16_t numOfSharedPlcrProfiles);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ConfigPlcrAutoRefreshMode
-+
-+ @Description   Calling this routine changes the internal driver data base
-+                from its default selection of exceptions enablement.
-+                By default auto-refresh is [DEFAULT_plcrAutoRefresh].
-+
-+ @Param[in]     h_FmPcd         FM PCD module descriptor.
-+ @Param[in]     enable          TRUE to enable, FALSE to disable
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_PCD_ConfigPlcrAutoRefreshMode(t_Handle h_FmPcd, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ConfigPrsMaxCycleLimit
-+
-+ @Description   Calling this routine changes the internal data structure for
-+                the maximum parsing time from its default value
-+                [DEFAULT_MAX_PRS_CYC_LIM].
-+
-+ @Param[in]     h_FmPcd         FM PCD module descriptor.
-+ @Param[in]     value           0 to disable the mechanism, or new
-+                                maximum parsing time.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_PCD_ConfigPrsMaxCycleLimit(t_Handle h_FmPcd,uint16_t value);
-+
-+/** @} */ /* end of FM_PCD_advanced_cfg_grp group */
-+/** @} */ /* end of FM_PCD_init_grp group */
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_PCD_Runtime_grp FM PCD Runtime Unit
-+
-+ @Description   Frame Manager PCD Runtime Unit API
-+
-+                The runtime control allows creation of PCD infrastructure modules
-+                such as Network Environment Characteristics, Classification Plan
-+                Groups and Coarse Classification Trees.
-+                It also allows on-the-fly initialization, modification and removal
-+                of PCD modules such as KeyGen schemes, coarse classification nodes
-+                and Policer profiles.
-+
-+                In order to explain the programming model of the PCD driver interface
-+                a few terms should be explained, and will be used below.
-+                  - Distinction Header - One of the 16 protocols supported by the FM parser,
-+                    or one of the SHIM headers (1 or 2). May be a header with a special
-+                    option (see below).
-+                  - Interchangeable Headers Group - This is a group of Headers recognized
-+                    by either one of them. For example, if in a specific context the user
-+                    chooses to treat IPv4 and IPV6 in the same way, they may create an
-+                    interchangeable Headers Unit consisting of these 2 headers.
-+                  - A Distinction Unit - a Distinction Header or an Interchangeable Headers
-+                    Group.
-+                  - Header with special option - applies to Ethernet, MPLS, VLAN, IPv4 and
-+                    IPv6, includes multicast, broadcast and other protocol specific options.
-+                    In terms of hardware it relates to the options available in the classification
-+                    plan.
-+                  - Network Environment Characteristics - a set of Distinction Units that define
-+                    the total recognizable header selection for a certain environment. This is
-+                    NOT the list of all headers that will ever appear in a flow, but rather
-+                    everything that needs distinction in a flow, where distinction is made by KeyGen
-+                    schemes and coarse classification action descriptors.
-+
-+                The PCD runtime modules initialization is done in stages. The first stage after
-+                initializing the PCD module itself is to establish a Network Flows Environment
-+                Definition. The application may choose to establish one or more such environments.
-+                Later, when needed, the application will have to state, for some of its modules,
-+                to which single environment it belongs.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   A structure for SW parser labels
-+ *//***************************************************************************/
-+typedef struct t_FmPcdPrsLabelParams {
-+    uint32_t                instructionOffset;              /**< SW parser label instruction offset (2 bytes
-+                                                                 resolution), relative to Parser RAM. */
-+    e_NetHeaderType         hdr;                            /**< The existence of this header will invoke
-+                                                                 the SW parser code; Use  HEADER_TYPE_NONE
-+                                                                 to indicate that sw parser is to run
-+                                                                 independent of the existence of any protocol
-+                                                                 (run before HW parser). */
-+    uint8_t                 indexPerHdr;                    /**< Normally 0, if more than one SW parser
-+                                                                 attachments for the same header, use this
-+                                                                 index to distinguish between them. */
-+} t_FmPcdPrsLabelParams;
-+
-+/**************************************************************************//**
-+ @Description   A structure for SW parser
-+ *//***************************************************************************/
-+typedef struct t_FmPcdPrsSwParams {
-+    bool                    override;                   /**< FALSE to invoke a check that nothing else
-+                                                             was loaded to this address, including
-+                                                             internal patches.
-+                                                             TRUE to override any existing code.*/
-+    uint32_t                size;                       /**< SW parser code size */
-+    uint16_t                base;                       /**< SW parser base (in instruction counts!
-+                                                             must be larger than 0x20)*/
-+    uint8_t                 *p_Code;                    /**< SW parser code */
-+    uint32_t                swPrsDataParams[FM_PCD_PRS_NUM_OF_HDRS];
-+                                                        /**< SW parser data (parameters) */
-+    uint8_t                 numOfLabels;                /**< Number of labels for SW parser. */
-+    t_FmPcdPrsLabelParams   labelsTable[FM_PCD_PRS_NUM_OF_LABELS];
-+                                                        /**< SW parser labels table, containing
-+                                                             numOfLabels entries */
-+} t_FmPcdPrsSwParams;
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_Enable
-+
-+ @Description   This routine should be called after PCD is initialized for enabling all
-+                PCD engines according to their existing configuration.
-+
-+ @Param[in]     h_FmPcd         FM PCD module descriptor.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init() and when PCD is disabled.
-+*//***************************************************************************/
-+t_Error FM_PCD_Enable(t_Handle h_FmPcd);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_Disable
-+
-+ @Description   This routine may be called when PCD is enabled in order to
-+                disable all PCD engines. It may be called
-+                only when none of the ports in the system are using the PCD.
-+
-+ @Param[in]     h_FmPcd         FM PCD module descriptor.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init() and when PCD is enabled.
-+*//***************************************************************************/
-+t_Error FM_PCD_Disable(t_Handle h_FmPcd);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_GetCounter
-+
-+ @Description   Reads one of the FM PCD counters.
-+
-+ @Param[in]     h_FmPcd     FM PCD module descriptor.
-+ @Param[in]     counter     The requested counter.
-+
-+ @Return        Counter's current value.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+                Note that it is user's responsibility to call this routine only
-+                for enabled counters, and there will be no indication if a
-+                disabled counter is accessed.
-+*//***************************************************************************/
-+uint32_t FM_PCD_GetCounter(t_Handle h_FmPcd, e_FmPcdCounters counter);
-+
-+/**************************************************************************//**
-+@Function       FM_PCD_PrsLoadSw
-+
-+@Description    This routine may be called in order to load software parsing code.
-+
-+
-+@Param[in]      h_FmPcd        FM PCD module descriptor.
-+@Param[in]      p_SwPrs        A pointer to a structure of software
-+                               parser parameters, including the software
-+                               parser image.
-+
-+@Return         E_OK on success; Error code otherwise.
-+
-+@Cautions       Allowed only following FM_PCD_Init() and when PCD is disabled.
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_PCD_PrsLoadSw(t_Handle h_FmPcd, t_FmPcdPrsSwParams *p_SwPrs);
-+
-+/**************************************************************************//**
-+@Function      FM_PCD_SetAdvancedOffloadSupport
-+
-+@Description   This routine must be called in order to support the following features:
-+               IP-fragmentation, IP-reassembly, IPsec, Header-manipulation, frame-replicator.
-+
-+@Param[in]     h_FmPcd         FM PCD module descriptor.
-+
-+@Return        E_OK on success; Error code otherwise.
-+
-+@Cautions      Allowed only following FM_PCD_Init() and when PCD is disabled.
-+               This routine should NOT be called from guest-partition
-+               (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_PCD_SetAdvancedOffloadSupport(t_Handle h_FmPcd);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_KgSetDfltValue
-+
-+ @Description   Calling this routine sets a global default value to be used
-+                by the KeyGen when parser does not recognize a required
-+                field/header.
-+                By default default values are 0.
-+
-+ @Param[in]     h_FmPcd         FM PCD module descriptor.
-+ @Param[in]     valueId         0,1 - one of 2 global default values.
-+ @Param[in]     value           The requested default value.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init() and when PCD is disabled.
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_PCD_KgSetDfltValue(t_Handle h_FmPcd, uint8_t valueId, uint32_t value);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_KgSetAdditionalDataAfterParsing
-+
-+ @Description   Calling this routine allows the KeyGen to access data past
-+                the parser finishing point.
-+
-+ @Param[in]     h_FmPcd         FM PCD module descriptor.
-+ @Param[in]     payloadOffset   the number of bytes beyond the parser location.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init() and when PCD is disabled.
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_PCD_KgSetAdditionalDataAfterParsing(t_Handle h_FmPcd, uint8_t payloadOffset);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_SetException
-+
-+ @Description   Calling this routine enables/disables PCD interrupts.
-+
-+ @Param[in]     h_FmPcd         FM PCD module descriptor.
-+ @Param[in]     exception       The exception to be selected.
-+ @Param[in]     enable          TRUE to enable interrupt, FALSE to mask it.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_PCD_SetException(t_Handle h_FmPcd, e_FmPcdExceptions exception, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ModifyCounter
-+
-+ @Description   Sets a value to an enabled counter. Use "0" to reset the counter.
-+
-+ @Param[in]     h_FmPcd     FM PCD module descriptor.
-+ @Param[in]     counter     The requested counter.
-+ @Param[in]     value       The requested value to be written into the counter.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_PCD_ModifyCounter(t_Handle h_FmPcd, e_FmPcdCounters counter, uint32_t value);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_SetPlcrStatistics
-+
-+ @Description   This routine may be used to enable/disable policer statistics
-+                counter. By default the statistics is enabled.
-+
-+ @Param[in]     h_FmPcd         FM PCD module descriptor
-+ @Param[in]     enable          TRUE to enable, FALSE to disable.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_PCD_SetPlcrStatistics(t_Handle h_FmPcd, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_SetPrsStatistics
-+
-+ @Description   Defines whether to gather parser statistics including all ports.
-+
-+ @Param[in]     h_FmPcd     FM PCD module descriptor.
-+ @Param[in]     enable      TRUE to enable, FALSE to disable.
-+
-+ @Return        None
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+void FM_PCD_SetPrsStatistics(t_Handle h_FmPcd, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_HcTxConf
-+
-+ @Description   This routine should be called to confirm frames that were
-+                 received on the HC confirmation queue.
-+
-+ @Param[in]     h_FmPcd         A handle to an FM PCD Module.
-+ @Param[in]     p_Fd            Frame descriptor of the received frame.
-+
-+ @Cautions      Allowed only following FM_PCD_Init(). Allowed only if 'useHostCommand'
-+                option was selected in the initialization.
-+*//***************************************************************************/
-+void FM_PCD_HcTxConf(t_Handle h_FmPcd, t_DpaaFD *p_Fd);
-+
-+/**************************************************************************//*
-+ @Function      FM_PCD_ForceIntr
-+
-+ @Description   Causes an interrupt event on the requested source.
-+
-+ @Param[in]     h_FmPcd     FM PCD module descriptor.
-+ @Param[in]     exception       An exception to be forced.
-+
-+ @Return        E_OK on success; Error code if the exception is not enabled,
-+                or is not able to create interrupt.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_PCD_ForceIntr (t_Handle h_FmPcd, e_FmPcdExceptions exception);
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+/**************************************************************************//**
-+ @Function      FM_PCD_DumpRegs
-+
-+ @Description   Dumps all PCD registers
-+
-+ @Param[in]     h_FmPcd         A handle to an FM PCD Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+                NOTE: this routine may be called only for FM in master mode
-+                (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the registers
-+                are mapped.
-+*//***************************************************************************/
-+t_Error FM_PCD_DumpRegs(t_Handle h_FmPcd);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_KgDumpRegs
-+
-+ @Description   Dumps all PCD KG registers
-+
-+ @Param[in]     h_FmPcd         A handle to an FM PCD Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+                NOTE: this routine may be called only for FM in master mode
-+                (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the registers
-+                are mapped.
-+*//***************************************************************************/
-+t_Error FM_PCD_KgDumpRegs(t_Handle h_FmPcd);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_PlcrDumpRegs
-+
-+ @Description   Dumps all PCD Policer registers
-+
-+ @Param[in]     h_FmPcd         A handle to an FM PCD Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+                NOTE: this routine may be called only for FM in master mode
-+                (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the registers
-+                are mapped.
-+*//***************************************************************************/
-+t_Error FM_PCD_PlcrDumpRegs(t_Handle h_FmPcd);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_PlcrProfileDumpRegs
-+
-+ @Description   Dumps all PCD Policer profile registers
-+
-+ @Param[in]     h_Profile       A handle to a Policer profile.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+                NOTE: this routine may be called only for FM in master mode
-+                (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the registers
-+                are mapped.
-+*//***************************************************************************/
-+t_Error FM_PCD_PlcrProfileDumpRegs(t_Handle h_Profile);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_PrsDumpRegs
-+
-+ @Description   Dumps all PCD Parser registers
-+
-+ @Param[in]     h_FmPcd         A handle to an FM PCD Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+                NOTE: this routine may be called only for FM in master mode
-+                (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the registers
-+                are mapped.
-+*//***************************************************************************/
-+t_Error FM_PCD_PrsDumpRegs(t_Handle h_FmPcd);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_HcDumpRegs
-+
-+ @Description   Dumps HC Port registers
-+
-+ @Param[in]     h_FmPcd         A handle to an FM PCD Module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+                NOTE: this routine may be called only for FM in master mode
-+                (i.e. 'guestId'=NCSW_MASTER_ID).
-+*//***************************************************************************/
-+t_Error     FM_PCD_HcDumpRegs(t_Handle h_FmPcd);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+
-+
-+/**************************************************************************//**
-+ KeyGen         FM_PCD_Runtime_build_grp FM PCD Runtime Building Unit
-+
-+ @Description   Frame Manager PCD Runtime Building API
-+
-+                This group contains routines for setting, deleting and modifying
-+                PCD resources, for defining the total PCD tree.
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Collection    Definitions of coarse classification
-+                parameters as required by KeyGen (when coarse classification
-+                is the next engine after this scheme).
-+*//***************************************************************************/
-+#define FM_PCD_MAX_NUM_OF_CC_TREES              8
-+#define FM_PCD_MAX_NUM_OF_CC_GROUPS             16
-+#define FM_PCD_MAX_NUM_OF_CC_UNITS              4
-+#define FM_PCD_MAX_NUM_OF_KEYS                  256
-+#define FM_PCD_MAX_NUM_OF_FLOWS                 (4*KILOBYTE)
-+#define FM_PCD_MAX_SIZE_OF_KEY                  56
-+#define FM_PCD_MAX_NUM_OF_CC_ENTRIES_IN_GRP     16
-+#define FM_PCD_LAST_KEY_INDEX                   0xffff
-+
-+#define FM_PCD_MAX_NUM_OF_CC_NODES              255 /* Obsolete, not used - will be removed in the future */
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Collection    A set of definitions to allow protocol
-+                special option description.
-+*//***************************************************************************/
-+typedef uint32_t        protocolOpt_t;          /**< A general type to define a protocol option. */
-+
-+typedef protocolOpt_t   ethProtocolOpt_t;       /**< Ethernet protocol options. */
-+#define ETH_BROADCAST               0x80000000  /**< Ethernet Broadcast. */
-+#define ETH_MULTICAST               0x40000000  /**< Ethernet Multicast. */
-+
-+typedef protocolOpt_t   vlanProtocolOpt_t;      /**< VLAN protocol options. */
-+#define VLAN_STACKED                0x20000000  /**< Stacked VLAN. */
-+
-+typedef protocolOpt_t   mplsProtocolOpt_t;      /**< MPLS protocol options. */
-+#define MPLS_STACKED                0x10000000  /**< Stacked MPLS. */
-+
-+typedef protocolOpt_t   ipv4ProtocolOpt_t;      /**< IPv4 protocol options. */
-+#define IPV4_BROADCAST_1            0x08000000  /**< IPv4 Broadcast. */
-+#define IPV4_MULTICAST_1            0x04000000  /**< IPv4 Multicast. */
-+#define IPV4_UNICAST_2              0x02000000  /**< Tunneled IPv4 - Unicast. */
-+#define IPV4_MULTICAST_BROADCAST_2  0x01000000  /**< Tunneled IPv4 - Broadcast/Multicast. */
-+
-+#define IPV4_FRAG_1                 0x00000008  /**< IPV4 reassembly option.
-+                                                     IPV4 Reassembly manipulation requires network
-+                                                     environment with IPV4 header and IPV4_FRAG_1 option  */
-+
-+typedef protocolOpt_t   ipv6ProtocolOpt_t;      /**< IPv6 protocol options. */
-+#define IPV6_MULTICAST_1            0x00800000  /**< IPv6 Multicast. */
-+#define IPV6_UNICAST_2              0x00400000  /**< Tunneled IPv6 - Unicast. */
-+#define IPV6_MULTICAST_2            0x00200000  /**< Tunneled IPv6 - Multicast. */
-+
-+#define IPV6_FRAG_1                 0x00000004  /**< IPV6 reassembly option.
-+                                                     IPV6 Reassembly manipulation requires network
-+                                                     environment with IPV6 header and IPV6_FRAG_1 option;
-+                                                     in case where fragment found, the fragment-extension offset
-+                                                     may be found at 'shim2' (in parser-result). */
-+#if (DPAA_VERSION >= 11)
-+typedef protocolOpt_t   capwapProtocolOpt_t;      /**< CAPWAP protocol options. */
-+#define CAPWAP_FRAG_1               0x00000008  /**< CAPWAP reassembly option.
-+                                                     CAPWAP Reassembly manipulation requires network
-+                                                     environment with CAPWAP header and CAPWAP_FRAG_1 option;
-+                                                     in case where fragment found, the fragment-extension offset
-+                                                     may be found at 'shim2' (in parser-result). */
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+
-+/* @} */
-+
-+#define FM_PCD_MANIP_MAX_HDR_SIZE               256
-+#define FM_PCD_MANIP_DSCP_TO_VLAN_TRANS         64
-+
-+/**************************************************************************//**
-+ @Collection    A set of definitions to support Header Manipulation selection.
-+*//***************************************************************************/
-+typedef uint32_t                hdrManipFlags_t;            /**< A general type to define a HMan update command flags. */
-+
-+typedef hdrManipFlags_t         ipv4HdrManipUpdateFlags_t;  /**< IPv4 protocol HMan update command flags. */
-+
-+#define HDR_MANIP_IPV4_TOS      0x80000000                  /**< update TOS with the given value ('tos' field
-+                                                                 of t_FmPcdManipHdrFieldUpdateIpv4) */
-+#define HDR_MANIP_IPV4_ID       0x40000000                  /**< update IP ID with the given value ('id' field
-+                                                                 of t_FmPcdManipHdrFieldUpdateIpv4) */
-+#define HDR_MANIP_IPV4_TTL      0x20000000                  /**< Decrement TTL by 1 */
-+#define HDR_MANIP_IPV4_SRC      0x10000000                  /**< update IP source address with the given value
-+                                                                 ('src' field of t_FmPcdManipHdrFieldUpdateIpv4) */
-+#define HDR_MANIP_IPV4_DST      0x08000000                  /**< update IP destination address with the given value
-+                                                                 ('dst' field of t_FmPcdManipHdrFieldUpdateIpv4) */
-+
-+typedef hdrManipFlags_t         ipv6HdrManipUpdateFlags_t;  /**< IPv6 protocol HMan update command flags. */
-+
-+#define HDR_MANIP_IPV6_TC       0x80000000                  /**< update Traffic Class address with the given value
-+                                                                 ('trafficClass' field of t_FmPcdManipHdrFieldUpdateIpv6) */
-+#define HDR_MANIP_IPV6_HL       0x40000000                  /**< Decrement Hop Limit by 1 */
-+#define HDR_MANIP_IPV6_SRC      0x20000000                  /**< update IP source address with the given value
-+                                                                 ('src' field of t_FmPcdManipHdrFieldUpdateIpv6) */
-+#define HDR_MANIP_IPV6_DST      0x10000000                  /**< update IP destination address with the given value
-+                                                                 ('dst' field of t_FmPcdManipHdrFieldUpdateIpv6) */
-+
-+typedef hdrManipFlags_t         tcpUdpHdrManipUpdateFlags_t;/**< TCP/UDP protocol HMan update command flags. */
-+
-+#define HDR_MANIP_TCP_UDP_SRC       0x80000000              /**< update TCP/UDP source address with the given value
-+                                                                 ('src' field of t_FmPcdManipHdrFieldUpdateTcpUdp) */
-+#define HDR_MANIP_TCP_UDP_DST       0x40000000              /**< update TCP/UDP destination address with the given value
-+                                                                 ('dst' field of t_FmPcdManipHdrFieldUpdateTcpUdp) */
-+#define HDR_MANIP_TCP_UDP_CHECKSUM  0x20000000             /**< update TCP/UDP checksum */
-+
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Description   A type used for returning the order of the key extraction.
-+                each value in this array represents the index of the extraction
-+                command as defined by the user in the initialization extraction array.
-+                The valid size of this array is the user define number of extractions
-+                required (also marked by the second '0' in this array).
-+*//***************************************************************************/
-+typedef    uint8_t    t_FmPcdKgKeyOrder [FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY];
-+
-+/**************************************************************************//**
-+ @Description   All PCD engines
-+*//***************************************************************************/
-+typedef enum e_FmPcdEngine {
-+    e_FM_PCD_INVALID = 0,   /**< Invalid PCD engine */
-+    e_FM_PCD_DONE,          /**< No PCD Engine indicated */
-+    e_FM_PCD_KG,            /**< KeyGen */
-+    e_FM_PCD_CC,            /**< Coarse classifier */
-+    e_FM_PCD_PLCR,          /**< Policer */
-+    e_FM_PCD_PRS,           /**< Parser */
-+#if (DPAA_VERSION >= 11)
-+    e_FM_PCD_FR,            /**< Frame-Replicator */
-+#endif /* (DPAA_VERSION >= 11) */
-+    e_FM_PCD_HASH           /**< Hash table */
-+} e_FmPcdEngine;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting extraction by header types
-+*//***************************************************************************/
-+typedef enum e_FmPcdExtractByHdrType {
-+    e_FM_PCD_EXTRACT_FROM_HDR,      /**< Extract bytes from header */
-+    e_FM_PCD_EXTRACT_FROM_FIELD,    /**< Extract bytes from header field */
-+    e_FM_PCD_EXTRACT_FULL_FIELD     /**< Extract a full field */
-+} e_FmPcdExtractByHdrType;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting extraction source
-+                (when it is not the header)
-+*//***************************************************************************/
-+typedef enum e_FmPcdExtractFrom {
-+    e_FM_PCD_EXTRACT_FROM_FRAME_START,          /**< KG & CC: Extract from beginning of frame */
-+    e_FM_PCD_EXTRACT_FROM_DFLT_VALUE,           /**< KG only: Extract from a default value */
-+    e_FM_PCD_EXTRACT_FROM_CURR_END_OF_PARSE,    /**< KG & CC: Extract from the point where parsing had finished */
-+    e_FM_PCD_EXTRACT_FROM_KEY,                  /**< CC only: Field where saved KEY */
-+    e_FM_PCD_EXTRACT_FROM_HASH,                 /**< CC only: Field where saved HASH */
-+    e_FM_PCD_EXTRACT_FROM_PARSE_RESULT,         /**< KG only: Extract from the parser result */
-+    e_FM_PCD_EXTRACT_FROM_ENQ_FQID,             /**< KG & CC: Extract from enqueue FQID */
-+    e_FM_PCD_EXTRACT_FROM_FLOW_ID               /**< CC only: Field where saved Dequeue FQID */
-+} e_FmPcdExtractFrom;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting extraction type
-+*//***************************************************************************/
-+typedef enum e_FmPcdExtractType {
-+    e_FM_PCD_EXTRACT_BY_HDR,                /**< Extract according to header */
-+    e_FM_PCD_EXTRACT_NON_HDR,               /**< Extract from data that is not the header */
-+    e_FM_PCD_KG_EXTRACT_PORT_PRIVATE_INFO   /**< Extract private info as specified by user */
-+} e_FmPcdExtractType;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting default extraction value
-+*//***************************************************************************/
-+typedef enum e_FmPcdKgExtractDfltSelect {
-+    e_FM_PCD_KG_DFLT_GBL_0,          /**< Default selection is KG register 0 */
-+    e_FM_PCD_KG_DFLT_GBL_1,          /**< Default selection is KG register 1 */
-+    e_FM_PCD_KG_DFLT_PRIVATE_0,      /**< Default selection is a per scheme register 0 */
-+    e_FM_PCD_KG_DFLT_PRIVATE_1,      /**< Default selection is a per scheme register 1 */
-+    e_FM_PCD_KG_DFLT_ILLEGAL         /**< Illegal selection */
-+} e_FmPcdKgExtractDfltSelect;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type defining all default groups - each group shares
-+                a default value, one of four user-initialized values.
-+*//***************************************************************************/
-+typedef enum e_FmPcdKgKnownFieldsDfltTypes {
-+    e_FM_PCD_KG_MAC_ADDR,               /**< MAC Address */
-+    e_FM_PCD_KG_TCI,                    /**< TCI field */
-+    e_FM_PCD_KG_ENET_TYPE,              /**< ENET Type */
-+    e_FM_PCD_KG_PPP_SESSION_ID,         /**< PPP Session id */
-+    e_FM_PCD_KG_PPP_PROTOCOL_ID,        /**< PPP Protocol id */
-+    e_FM_PCD_KG_MPLS_LABEL,             /**< MPLS label */
-+    e_FM_PCD_KG_IP_ADDR,                /**< IP address */
-+    e_FM_PCD_KG_PROTOCOL_TYPE,          /**< Protocol type */
-+    e_FM_PCD_KG_IP_TOS_TC,              /**< TOS or TC */
-+    e_FM_PCD_KG_IPV6_FLOW_LABEL,        /**< IPV6 flow label */
-+    e_FM_PCD_KG_IPSEC_SPI,              /**< IPSEC SPI */
-+    e_FM_PCD_KG_L4_PORT,                /**< L4 Port */
-+    e_FM_PCD_KG_TCP_FLAG,               /**< TCP Flag */
-+    e_FM_PCD_KG_GENERIC_FROM_DATA,      /**< grouping implemented by SW,
-+                                             any data extraction that is not the full
-+                                             field described above  */
-+    e_FM_PCD_KG_GENERIC_FROM_DATA_NO_V, /**< grouping implemented by SW,
-+                                             any data extraction without validation */
-+    e_FM_PCD_KG_GENERIC_NOT_FROM_DATA   /**< grouping implemented by SW,
-+                                             extraction from parser result or
-+                                             direct use of default value  */
-+} e_FmPcdKgKnownFieldsDfltTypes;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for defining header index for scenarios with
-+                multiple (tunneled) headers
-+*//***************************************************************************/
-+typedef enum e_FmPcdHdrIndex {
-+    e_FM_PCD_HDR_INDEX_NONE = 0,        /**< used when multiple headers not used, also
-+                                             to specify regular IP (not tunneled). */
-+    e_FM_PCD_HDR_INDEX_1,               /**< may be used for VLAN, MPLS, tunneled IP */
-+    e_FM_PCD_HDR_INDEX_2,               /**< may be used for MPLS, tunneled IP */
-+    e_FM_PCD_HDR_INDEX_3,               /**< may be used for MPLS */
-+    e_FM_PCD_HDR_INDEX_LAST = 0xFF      /**< may be used for VLAN, MPLS */
-+} e_FmPcdHdrIndex;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting the policer profile functional type
-+*//***************************************************************************/
-+typedef enum e_FmPcdProfileTypeSelection {
-+    e_FM_PCD_PLCR_PORT_PRIVATE,         /**< Port dedicated profile */
-+    e_FM_PCD_PLCR_SHARED                /**< Shared profile (shared within partition) */
-+} e_FmPcdProfileTypeSelection;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting the policer profile algorithm
-+*//***************************************************************************/
-+typedef enum e_FmPcdPlcrAlgorithmSelection {
-+    e_FM_PCD_PLCR_PASS_THROUGH,         /**< Policer pass through */
-+    e_FM_PCD_PLCR_RFC_2698,             /**< Policer algorithm RFC 2698 */
-+    e_FM_PCD_PLCR_RFC_4115              /**< Policer algorithm RFC 4115 */
-+} e_FmPcdPlcrAlgorithmSelection;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting a policer profile color mode
-+*//***************************************************************************/
-+typedef enum e_FmPcdPlcrColorMode {
-+    e_FM_PCD_PLCR_COLOR_BLIND,          /**< Color blind */
-+    e_FM_PCD_PLCR_COLOR_AWARE           /**< Color aware */
-+} e_FmPcdPlcrColorMode;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting a policer profile color
-+*//***************************************************************************/
-+typedef enum e_FmPcdPlcrColor {
-+    e_FM_PCD_PLCR_GREEN,                /**< Green color code */
-+    e_FM_PCD_PLCR_YELLOW,               /**< Yellow color code */
-+    e_FM_PCD_PLCR_RED,                  /**< Red color code */
-+    e_FM_PCD_PLCR_OVERRIDE              /**< Color override code */
-+} e_FmPcdPlcrColor;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting the policer profile packet frame length selector
-+*//***************************************************************************/
-+typedef enum e_FmPcdPlcrFrameLengthSelect {
-+  e_FM_PCD_PLCR_L2_FRM_LEN,             /**< L2 frame length */
-+  e_FM_PCD_PLCR_L3_FRM_LEN,             /**< L3 frame length */
-+  e_FM_PCD_PLCR_L4_FRM_LEN,             /**< L4 frame length */
-+  e_FM_PCD_PLCR_FULL_FRM_LEN            /**< Full frame length */
-+} e_FmPcdPlcrFrameLengthSelect;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting roll-back frame
-+*//***************************************************************************/
-+typedef enum e_FmPcdPlcrRollBackFrameSelect {
-+  e_FM_PCD_PLCR_ROLLBACK_L2_FRM_LEN,    /**< Roll-back L2 frame length */
-+  e_FM_PCD_PLCR_ROLLBACK_FULL_FRM_LEN   /**< Roll-back Full frame length */
-+} e_FmPcdPlcrRollBackFrameSelect;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting the policer profile packet or byte mode
-+*//***************************************************************************/
-+typedef enum e_FmPcdPlcrRateMode {
-+    e_FM_PCD_PLCR_BYTE_MODE,            /**< Byte mode */
-+    e_FM_PCD_PLCR_PACKET_MODE           /**< Packet mode */
-+} e_FmPcdPlcrRateMode;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for defining action of frame
-+*//***************************************************************************/
-+typedef enum e_FmPcdDoneAction {
-+    e_FM_PCD_ENQ_FRAME = 0,        /**< Enqueue frame */
-+    e_FM_PCD_DROP_FRAME            /**< Mark this frame as error frame and continue
-+                                        to error flow; 'FM_PORT_FRM_ERR_CLS_DISCARD'
-+                                        flag will be set for this frame. */
-+} e_FmPcdDoneAction;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting the policer counter
-+*//***************************************************************************/
-+typedef enum e_FmPcdPlcrProfileCounters {
-+    e_FM_PCD_PLCR_PROFILE_GREEN_PACKET_TOTAL_COUNTER,               /**< Green packets counter */
-+    e_FM_PCD_PLCR_PROFILE_YELLOW_PACKET_TOTAL_COUNTER,              /**< Yellow packets counter */
-+    e_FM_PCD_PLCR_PROFILE_RED_PACKET_TOTAL_COUNTER,                 /**< Red packets counter */
-+    e_FM_PCD_PLCR_PROFILE_RECOLOURED_YELLOW_PACKET_TOTAL_COUNTER,   /**< Recolored yellow packets counter */
-+    e_FM_PCD_PLCR_PROFILE_RECOLOURED_RED_PACKET_TOTAL_COUNTER       /**< Recolored red packets counter */
-+} e_FmPcdPlcrProfileCounters;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting the PCD action after extraction
-+*//***************************************************************************/
-+typedef enum e_FmPcdAction {
-+    e_FM_PCD_ACTION_NONE,                           /**< NONE  */
-+    e_FM_PCD_ACTION_EXACT_MATCH,                    /**< Exact match on the selected extraction */
-+    e_FM_PCD_ACTION_INDEXED_LOOKUP                  /**< Indexed lookup on the selected extraction */
-+} e_FmPcdAction;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of insert manipulation
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipHdrInsrtType {
-+    e_FM_PCD_MANIP_INSRT_GENERIC,                   /**< Insert according to offset & size */
-+    e_FM_PCD_MANIP_INSRT_BY_HDR,                    /**< Insert according to protocol */
-+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+    e_FM_PCD_MANIP_INSRT_BY_TEMPLATE                /**< Insert template to start of frame */
-+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
-+} e_FmPcdManipHdrInsrtType;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of remove manipulation
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipHdrRmvType {
-+    e_FM_PCD_MANIP_RMV_GENERIC,                     /**< Remove according to offset & size */
-+    e_FM_PCD_MANIP_RMV_BY_HDR                       /**< Remove according to offset & size */
-+} e_FmPcdManipHdrRmvType;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting specific L2 fields removal
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipHdrRmvSpecificL2 {
-+    e_FM_PCD_MANIP_HDR_RMV_ETHERNET,                /**< Ethernet/802.3 MAC */
-+    e_FM_PCD_MANIP_HDR_RMV_STACKED_QTAGS,           /**< stacked QTags */
-+    e_FM_PCD_MANIP_HDR_RMV_ETHERNET_AND_MPLS,       /**< MPLS and Ethernet/802.3 MAC header until
-+                                                         the header which follows the MPLS header */
-+    e_FM_PCD_MANIP_HDR_RMV_MPLS,                     /**< Remove MPLS header (Unlimited MPLS labels) */
-+    e_FM_PCD_MANIP_HDR_RMV_PPPOE                     /**< Remove the PPPoE header and PPP protocol field. */
-+} e_FmPcdManipHdrRmvSpecificL2;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting specific fields updates
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipHdrFieldUpdateType {
-+    e_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN,               /**< VLAN updates */
-+    e_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV4,               /**< IPV4 updates */
-+    e_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV6,               /**< IPV6 updates */
-+    e_FM_PCD_MANIP_HDR_FIELD_UPDATE_TCP_UDP,            /**< TCP_UDP updates */
-+} e_FmPcdManipHdrFieldUpdateType;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting VLAN updates
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipHdrFieldUpdateVlan {
-+    e_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN_VPRI,      /**< Replace VPri of outer most VLAN tag. */
-+    e_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN    /**< DSCP to VLAN priority bits translation */
-+} e_FmPcdManipHdrFieldUpdateVlan;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting specific L2 header insertion
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipHdrInsrtSpecificL2 {
-+    e_FM_PCD_MANIP_HDR_INSRT_MPLS,                   /**< Insert MPLS header (Unlimited MPLS labels) */
-+    e_FM_PCD_MANIP_HDR_INSRT_PPPOE                   /**< Insert PPPOE */
-+} e_FmPcdManipHdrInsrtSpecificL2;
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting QoS mapping mode
-+
-+                Note: In all cases except 'e_FM_PCD_MANIP_HDR_QOS_MAPPING_NONE'
-+                User should instruct the port to read the hash-result
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipHdrQosMappingMode {
-+    e_FM_PCD_MANIP_HDR_QOS_MAPPING_NONE = 0,   /**< No mapping, QoS field will not be changed */
-+    e_FM_PCD_MANIP_HDR_QOS_MAPPING_AS_IS, /**< QoS field will be overwritten by the last byte in the hash-result. */
-+} e_FmPcdManipHdrQosMappingMode;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting QoS source
-+
-+                Note: In all cases except 'e_FM_PCD_MANIP_HDR_QOS_SRC_NONE'
-+                User should left room for the hash-result on input/output buffer
-+                and instruct the port to read/write the hash-result to the buffer (RPD should be set)
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipHdrQosSrc {
-+    e_FM_PCD_MANIP_HDR_QOS_SRC_NONE = 0,        /**< TODO */
-+    e_FM_PCD_MANIP_HDR_QOS_SRC_USER_DEFINED,    /**< QoS will be taken from the last byte in the hash-result. */
-+} e_FmPcdManipHdrQosSrc;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of header insertion
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipHdrInsrtByHdrType {
-+    e_FM_PCD_MANIP_INSRT_BY_HDR_SPECIFIC_L2,        /**< Specific L2 fields insertion */
-+#if (DPAA_VERSION >= 11)
-+    e_FM_PCD_MANIP_INSRT_BY_HDR_IP,                 /**< IP insertion */
-+    e_FM_PCD_MANIP_INSRT_BY_HDR_UDP,                /**< UDP insertion */
-+    e_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE,             /**< UDP lite insertion */
-+    e_FM_PCD_MANIP_INSRT_BY_HDR_CAPWAP                 /**< CAPWAP insertion */
-+#endif /* (DPAA_VERSION >= 11) */
-+} e_FmPcdManipHdrInsrtByHdrType;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting specific customCommand
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipHdrCustomType {
-+    e_FM_PCD_MANIP_HDR_CUSTOM_IP_REPLACE,           /**< Replace IPv4/IPv6 */
-+    e_FM_PCD_MANIP_HDR_CUSTOM_GEN_FIELD_REPLACE,     /**< Replace IPv4/IPv6 */
-+} e_FmPcdManipHdrCustomType;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting specific customCommand
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipHdrCustomIpReplace {
-+    e_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV4_BY_IPV6,           /**< Replace IPv4 by IPv6 */
-+    e_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV6_BY_IPV4            /**< Replace IPv6 by IPv4 */
-+} e_FmPcdManipHdrCustomIpReplace;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of header removal
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipHdrRmvByHdrType {
-+    e_FM_PCD_MANIP_RMV_BY_HDR_SPECIFIC_L2 = 0,      /**< Specific L2 fields removal */
-+#if (DPAA_VERSION >= 11)
-+    e_FM_PCD_MANIP_RMV_BY_HDR_CAPWAP,                  /**< CAPWAP removal */
-+#endif /* (DPAA_VERSION >= 11) */
-+#if (DPAA_VERSION >= 11) || ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+    e_FM_PCD_MANIP_RMV_BY_HDR_FROM_START,           /**< Locate from data that is not the header */
-+#endif /* (DPAA_VERSION >= 11) || ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
-+} e_FmPcdManipHdrRmvByHdrType;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of timeout mode
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipReassemTimeOutMode {
-+    e_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAMES, /**< Limits the time of the reassembly process
-+                                                 from the first fragment to the last */
-+    e_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAG    /**< Limits the time of receiving the fragment */
-+} e_FmPcdManipReassemTimeOutMode;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of WaysNumber mode
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipReassemWaysNumber {
-+    e_FM_PCD_MANIP_ONE_WAY_HASH = 1,    /**< One way hash    */
-+    e_FM_PCD_MANIP_TWO_WAYS_HASH,       /**< Two ways hash   */
-+    e_FM_PCD_MANIP_THREE_WAYS_HASH,     /**< Three ways hash */
-+    e_FM_PCD_MANIP_FOUR_WAYS_HASH,      /**< Four ways hash  */
-+    e_FM_PCD_MANIP_FIVE_WAYS_HASH,      /**< Five ways hash  */
-+    e_FM_PCD_MANIP_SIX_WAYS_HASH,       /**< Six ways hash   */
-+    e_FM_PCD_MANIP_SEVEN_WAYS_HASH,     /**< Seven ways hash */
-+    e_FM_PCD_MANIP_EIGHT_WAYS_HASH      /**< Eight ways hash */
-+} e_FmPcdManipReassemWaysNumber;
-+
-+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of statistics mode
-+*//***************************************************************************/
-+typedef enum e_FmPcdStatsType {
-+    e_FM_PCD_STATS_PER_FLOWID = 0       /**< Flow ID is used as index for getting statistics */
-+} e_FmPcdStatsType;
-+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting manipulation type
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipType {
-+    e_FM_PCD_MANIP_HDR = 0,             /**< Header manipulation */
-+    e_FM_PCD_MANIP_REASSEM,             /**< Reassembly */
-+    e_FM_PCD_MANIP_FRAG,                /**< Fragmentation */
-+    e_FM_PCD_MANIP_SPECIAL_OFFLOAD      /**< Special Offloading */
-+} e_FmPcdManipType;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of statistics mode
-+*//***************************************************************************/
-+typedef enum e_FmPcdCcStatsMode {
-+    e_FM_PCD_CC_STATS_MODE_NONE = 0,        /**< No statistics support */
-+    e_FM_PCD_CC_STATS_MODE_FRAME,           /**< Frame count statistics */
-+    e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME,  /**< Byte and frame count statistics */
-+#if (DPAA_VERSION >= 11)
-+    e_FM_PCD_CC_STATS_MODE_RMON,            /**< Byte and frame length range count statistics;
-+                                                 This mode is supported only on B4860 device */
-+#endif /* (DPAA_VERSION >= 11) */
-+} e_FmPcdCcStatsMode;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for determining the action in case an IP packet
-+                is larger than MTU but its DF (Don't Fragment) bit is set.
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipDontFragAction {
-+    e_FM_PCD_MANIP_DISCARD_PACKET = 0,                  /**< Discard packet */
-+    e_FM_PCD_MANIP_ENQ_TO_ERR_Q_OR_DISCARD_PACKET = e_FM_PCD_MANIP_DISCARD_PACKET,
-+                                                        /**< Obsolete, cannot enqueue to error queue;
-+                                                             In practice, selects to discard packets;
-+                                                             Will be removed in the future */
-+    e_FM_PCD_MANIP_FRAGMENT_PACKET,                     /**< Fragment packet and continue normal processing */
-+    e_FM_PCD_MANIP_CONTINUE_WITHOUT_FRAG                /**< Continue normal processing without fragmenting the packet */
-+} e_FmPcdManipDontFragAction;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of special offload manipulation
-+*//***************************************************************************/
-+typedef enum e_FmPcdManipSpecialOffloadType {
-+    e_FM_PCD_MANIP_SPECIAL_OFFLOAD_IPSEC,    /**< IPSec offload manipulation */
-+#if (DPAA_VERSION >= 11)
-+    e_FM_PCD_MANIP_SPECIAL_OFFLOAD_CAPWAP    /**< CAPWAP offload manipulation */
-+#endif /* (DPAA_VERSION >= 11) */
-+} e_FmPcdManipSpecialOffloadType;
-+
-+
-+/**************************************************************************//**
-+ @Description   A Union of protocol dependent special options
-+*//***************************************************************************/
-+typedef union u_FmPcdHdrProtocolOpt {
-+    ethProtocolOpt_t    ethOpt;     /**< Ethernet options */
-+    vlanProtocolOpt_t   vlanOpt;    /**< VLAN options */
-+    mplsProtocolOpt_t   mplsOpt;    /**< MPLS options */
-+    ipv4ProtocolOpt_t   ipv4Opt;    /**< IPv4 options */
-+    ipv6ProtocolOpt_t   ipv6Opt;    /**< IPv6 options */
-+#if (DPAA_VERSION >= 11)
-+    capwapProtocolOpt_t capwapOpt;  /**< CAPWAP options */
-+#endif /* (DPAA_VERSION >= 11) */
-+} u_FmPcdHdrProtocolOpt;
-+
-+/**************************************************************************//**
-+ @Description   A union holding protocol fields
-+
-+
-+                Fields supported as "full fields":
-+                    HEADER_TYPE_ETH:
-+                        NET_HEADER_FIELD_ETH_DA
-+                        NET_HEADER_FIELD_ETH_SA
-+                        NET_HEADER_FIELD_ETH_TYPE
-+
-+                    HEADER_TYPE_LLC_SNAP:
-+                        NET_HEADER_FIELD_LLC_SNAP_TYPE
-+
-+                    HEADER_TYPE_VLAN:
-+                        NET_HEADER_FIELD_VLAN_TCI
-+                                (index may apply:
-+                                 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1,
-+                                 e_FM_PCD_HDR_INDEX_LAST)
-+
-+                    HEADER_TYPE_MPLS:
-+                        NET_HEADER_FIELD_MPLS_LABEL_STACK
-+                                (index may apply:
-+                                 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1,
-+                                 e_FM_PCD_HDR_INDEX_2,
-+                                 e_FM_PCD_HDR_INDEX_LAST)
-+
-+                    HEADER_TYPE_IPv4:
-+                        NET_HEADER_FIELD_IPv4_SRC_IP
-+                        NET_HEADER_FIELD_IPv4_DST_IP
-+                        NET_HEADER_FIELD_IPv4_PROTO
-+                        NET_HEADER_FIELD_IPv4_TOS
-+                                (index may apply:
-+                                 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1,
-+                                 e_FM_PCD_HDR_INDEX_2/e_FM_PCD_HDR_INDEX_LAST)
-+
-+                    HEADER_TYPE_IPv6:
-+                        NET_HEADER_FIELD_IPv6_SRC_IP
-+                        NET_HEADER_FIELD_IPv6_DST_IP
-+                        NET_HEADER_FIELD_IPv6_NEXT_HDR
-+                        NET_HEADER_FIELD_IPv6_VER | NET_HEADER_FIELD_IPv6_FL | NET_HEADER_FIELD_IPv6_TC (must come together!)
-+                                (index may apply:
-+                                 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1,
-+                                 e_FM_PCD_HDR_INDEX_2/e_FM_PCD_HDR_INDEX_LAST)
-+
-+                                (Note that starting from DPAA 1-1, NET_HEADER_FIELD_IPv6_NEXT_HDR applies to
-+                                 the last next header indication, meaning the next L4, which may be
-+                                 present at the Ipv6 last extension. On earlier revisions this field
-+                                 applies to the Next-Header field of the main IPv6 header)
-+
-+                    HEADER_TYPE_IP:
-+                        NET_HEADER_FIELD_IP_PROTO
-+                                (index may apply:
-+                                 e_FM_PCD_HDR_INDEX_LAST)
-+                        NET_HEADER_FIELD_IP_DSCP
-+                                (index may apply:
-+                                 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1)
-+                    HEADER_TYPE_GRE:
-+                        NET_HEADER_FIELD_GRE_TYPE
-+
-+                    HEADER_TYPE_MINENCAP
-+                        NET_HEADER_FIELD_MINENCAP_SRC_IP
-+                        NET_HEADER_FIELD_MINENCAP_DST_IP
-+                        NET_HEADER_FIELD_MINENCAP_TYPE
-+
-+                    HEADER_TYPE_TCP:
-+                        NET_HEADER_FIELD_TCP_PORT_SRC
-+                        NET_HEADER_FIELD_TCP_PORT_DST
-+                        NET_HEADER_FIELD_TCP_FLAGS
-+
-+                    HEADER_TYPE_UDP:
-+                        NET_HEADER_FIELD_UDP_PORT_SRC
-+                        NET_HEADER_FIELD_UDP_PORT_DST
-+
-+                    HEADER_TYPE_UDP_LITE:
-+                        NET_HEADER_FIELD_UDP_LITE_PORT_SRC
-+                        NET_HEADER_FIELD_UDP_LITE_PORT_DST
-+
-+                    HEADER_TYPE_IPSEC_AH:
-+                        NET_HEADER_FIELD_IPSEC_AH_SPI
-+                        NET_HEADER_FIELD_IPSEC_AH_NH
-+
-+                    HEADER_TYPE_IPSEC_ESP:
-+                        NET_HEADER_FIELD_IPSEC_ESP_SPI
-+
-+                    HEADER_TYPE_SCTP:
-+                        NET_HEADER_FIELD_SCTP_PORT_SRC
-+                        NET_HEADER_FIELD_SCTP_PORT_DST
-+
-+                    HEADER_TYPE_DCCP:
-+                        NET_HEADER_FIELD_DCCP_PORT_SRC
-+                        NET_HEADER_FIELD_DCCP_PORT_DST
-+
-+                    HEADER_TYPE_PPPoE:
-+                        NET_HEADER_FIELD_PPPoE_PID
-+                        NET_HEADER_FIELD_PPPoE_SID
-+
-+        *****************************************************************
-+                Fields supported as "from fields":
-+                    HEADER_TYPE_ETH (with or without validation):
-+                        NET_HEADER_FIELD_ETH_TYPE
-+
-+                    HEADER_TYPE_VLAN (with or without validation):
-+                        NET_HEADER_FIELD_VLAN_TCI
-+                                (index may apply:
-+                                 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1,
-+                                 e_FM_PCD_HDR_INDEX_LAST)
-+
-+                    HEADER_TYPE_IPv4 (without validation):
-+                        NET_HEADER_FIELD_IPv4_PROTO
-+                                (index may apply:
-+                                 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1,
-+                                 e_FM_PCD_HDR_INDEX_2/e_FM_PCD_HDR_INDEX_LAST)
-+
-+                    HEADER_TYPE_IPv6 (without validation):
-+                        NET_HEADER_FIELD_IPv6_NEXT_HDR
-+                                (index may apply:
-+                                 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1,
-+                                 e_FM_PCD_HDR_INDEX_2/e_FM_PCD_HDR_INDEX_LAST)
-+
-+*//***************************************************************************/
-+typedef union t_FmPcdFields {
-+    headerFieldEth_t            eth;            /**< Ethernet               */
-+    headerFieldVlan_t           vlan;           /**< VLAN                   */
-+    headerFieldLlcSnap_t        llcSnap;        /**< LLC SNAP               */
-+    headerFieldPppoe_t          pppoe;          /**< PPPoE                  */
-+    headerFieldMpls_t           mpls;           /**< MPLS                   */
-+    headerFieldIp_t             ip;             /**< IP                     */
-+    headerFieldIpv4_t           ipv4;           /**< IPv4                   */
-+    headerFieldIpv6_t           ipv6;           /**< IPv6                   */
-+    headerFieldUdp_t            udp;            /**< UDP                    */
-+    headerFieldUdpLite_t        udpLite;        /**< UDP Lite               */
-+    headerFieldTcp_t            tcp;            /**< TCP                    */
-+    headerFieldSctp_t           sctp;           /**< SCTP                   */
-+    headerFieldDccp_t           dccp;           /**< DCCP                   */
-+    headerFieldGre_t            gre;            /**< GRE                    */
-+    headerFieldMinencap_t       minencap;       /**< Minimal Encapsulation  */
-+    headerFieldIpsecAh_t        ipsecAh;        /**< IPSec AH               */
-+    headerFieldIpsecEsp_t       ipsecEsp;       /**< IPSec ESP              */
-+    headerFieldUdpEncapEsp_t    udpEncapEsp;    /**< UDP Encapsulation ESP  */
-+} t_FmPcdFields;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header extraction for key generation
-+*//***************************************************************************/
-+typedef struct t_FmPcdFromHdr {
-+    uint8_t             size;           /**< Size in byte */
-+    uint8_t             offset;         /**< Byte offset */
-+} t_FmPcdFromHdr;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining field extraction for key generation
-+*//***************************************************************************/
-+typedef struct t_FmPcdFromField {
-+    t_FmPcdFields       field;          /**< Field selection */
-+    uint8_t             size;           /**< Size in byte */
-+    uint8_t             offset;         /**< Byte offset */
-+} t_FmPcdFromField;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a single network environment unit
-+
-+                A distinction unit should be defined if it will later be used
-+                by one or more PCD engines to distinguish between flows.
-+*//***************************************************************************/
-+typedef struct t_FmPcdDistinctionUnit {
-+    struct {
-+        e_NetHeaderType         hdr;        /**< One of the headers supported by the FM */
-+        u_FmPcdHdrProtocolOpt   opt;        /**< Select only one option ! */
-+    } hdrs[FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS];
-+} t_FmPcdDistinctionUnit;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining all different distinction units supported
-+                by a specific PCD Network Environment Characteristics module.
-+
-+                Each unit represent a protocol or a group of protocols that may
-+                be used later by the different PCD engines to distinguish
-+                between flows.
-+*//***************************************************************************/
-+typedef struct t_FmPcdNetEnvParams {
-+    uint8_t                 numOfDistinctionUnits;                      /**< Number of different units to be identified */
-+    t_FmPcdDistinctionUnit  units[FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS]; /**< An array of numOfDistinctionUnits of the
-+                                                                             different units to be identified */
-+} t_FmPcdNetEnvParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a single extraction action when
-+                creating a key
-+*//***************************************************************************/
-+typedef struct t_FmPcdExtractEntry {
-+    e_FmPcdExtractType                  type;           /**< Extraction type select */
-+    union {
-+        struct {
-+            e_NetHeaderType             hdr;            /**< Header selection */
-+            bool                        ignoreProtocolValidation;
-+                                                        /**< Ignore protocol validation */
-+            e_FmPcdHdrIndex             hdrIndex;       /**< Relevant only for MPLS, VLAN and tunneled
-+                                                             IP. Otherwise should be cleared. */
-+            e_FmPcdExtractByHdrType     type;           /**< Header extraction type select */
-+            union {
-+                t_FmPcdFromHdr          fromHdr;        /**< Extract bytes from header parameters */
-+                t_FmPcdFromField        fromField;      /**< Extract bytes from field parameters */
-+                t_FmPcdFields           fullField;      /**< Extract full filed parameters */
-+            } extractByHdrType;
-+        } extractByHdr;                                 /**< used when type = e_FM_PCD_KG_EXTRACT_BY_HDR */
-+        struct {
-+            e_FmPcdExtractFrom          src;            /**< Non-header extraction source */
-+            e_FmPcdAction               action;         /**< Relevant for CC Only */
-+            uint16_t                    icIndxMask;     /**< Relevant only for CC when
-+                                                             action = e_FM_PCD_ACTION_INDEXED_LOOKUP;
-+                                                             Note that the number of bits that are set within
-+                                                             this mask must be log2 of the CC-node 'numOfKeys'.
-+                                                             Note that the mask cannot be set on the lower bits. */
-+            uint8_t                     offset;         /**< Byte offset */
-+            uint8_t                     size;           /**< Size in byte */
-+        } extractNonHdr;                                /**< used when type = e_FM_PCD_KG_EXTRACT_NON_HDR */
-+    };
-+} t_FmPcdExtractEntry;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining masks for each extracted field in the key.
-+*//***************************************************************************/
-+typedef struct t_FmPcdKgExtractMask {
-+    uint8_t                             extractArrayIndex;  /**< Index in the extraction array, as initialized by user */
-+    uint8_t                             offset;             /**< Byte offset */
-+    uint8_t                             mask;               /**< A byte mask (selected bits will be used) */
-+} t_FmPcdKgExtractMask;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining default selection per groups of fields
-+*//***************************************************************************/
-+typedef struct t_FmPcdKgExtractDflt {
-+    e_FmPcdKgKnownFieldsDfltTypes       type;                /**< Default type select */
-+    e_FmPcdKgExtractDfltSelect          dfltSelect;          /**< Default register select */
-+} t_FmPcdKgExtractDflt;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining key extraction and hashing
-+*//***************************************************************************/
-+typedef struct t_FmPcdKgKeyExtractAndHashParams {
-+    uint32_t                    privateDflt0;                /**< Scheme default register 0 */
-+    uint32_t                    privateDflt1;                /**< Scheme default register 1 */
-+    uint8_t                     numOfUsedExtracts;           /**< defines the valid size of the following array */
-+    t_FmPcdExtractEntry         extractArray [FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY]; /**< An array of extractions definition. */
-+    uint8_t                     numOfUsedDflts;              /**< defines the valid size of the following array */
-+    t_FmPcdKgExtractDflt        dflts[FM_PCD_KG_NUM_OF_DEFAULT_GROUPS];
-+                                                             /**< For each extraction used in this scheme, specify the required
-+                                                                  default register to be used when header is not found.
-+                                                                  types not specified in this array will get undefined value. */
-+    uint8_t                     numOfUsedMasks;              /**< defines the valid size of the following array */
-+    t_FmPcdKgExtractMask        masks[FM_PCD_KG_NUM_OF_EXTRACT_MASKS];
-+    uint8_t                     hashShift;                   /**< hash result right shift. Select the 24 bits out of the 64 hash
-+                                                                  result. 0 means using the 24 LSB's, otherwise use the
-+                                                                  24 LSB's after shifting right.*/
-+    uint32_t                    hashDistributionNumOfFqids;  /**< must be > 1 and a power of 2. Represents the range
-+                                                                  of queues for the key and hash functionality */
-+    uint8_t                     hashDistributionFqidsShift;  /**< selects the FQID bits that will be effected by the hash */
-+    bool                        symmetricHash;               /**< TRUE to generate the same hash for frames with swapped source and
-+                                                                  destination fields on all layers; If TRUE, driver will check that for
-+                                                                  all layers, if SRC extraction is selected, DST extraction must also be
-+                                                                  selected, and vice versa. */
-+} t_FmPcdKgKeyExtractAndHashParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a single FQID mask (extracted OR).
-+*//***************************************************************************/
-+typedef struct t_FmPcdKgExtractedOrParams {
-+    e_FmPcdExtractType              type;               /**< Extraction type select */
-+    union {
-+        struct {                                        /**< used when type = e_FM_PCD_KG_EXTRACT_BY_HDR */
-+            e_NetHeaderType         hdr;
-+            e_FmPcdHdrIndex         hdrIndex;           /**< Relevant only for MPLS, VLAN and tunneled
-+                                                             IP. Otherwise should be cleared.*/
-+            bool                    ignoreProtocolValidation;
-+                                                        /**< continue extraction even if protocol is not recognized */
-+        } extractByHdr;                                 /**< Header to extract by */
-+        e_FmPcdExtractFrom          src;                /**< used when type = e_FM_PCD_KG_EXTRACT_NON_HDR */
-+    };
-+    uint8_t                         extractionOffset;   /**< Offset for extraction (in bytes).  */
-+    e_FmPcdKgExtractDfltSelect      dfltValue;          /**< Select register from which extraction is taken if
-+                                                             field not found */
-+    uint8_t                         mask;               /**< Extraction mask (specified bits are used) */
-+    uint8_t                         bitOffsetInFqid;    /**< 0-31, Selects which bits of the 24 FQID bits to effect using
-+                                                             the extracted byte; Assume byte is placed as the 8 MSB's in
-+                                                             a 32 bit word where the lower bits
-+                                                             are the FQID; i.e if bitOffsetInFqid=1 than its LSB
-+                                                             will effect the FQID MSB, if bitOffsetInFqid=24 than the
-+                                                             extracted byte will effect the 8 LSB's of the FQID,
-+                                                             if bitOffsetInFqid=31 than the byte's MSB will effect
-+                                                             the FQID's LSB; 0 means - no effect on FQID;
-+                                                             Note that one, and only one of
-+                                                             bitOffsetInFqid or bitOffsetInPlcrProfile must be set (i.e,
-+                                                             extracted byte must effect either FQID or Policer profile).*/
-+    uint8_t                         bitOffsetInPlcrProfile;
-+                                                        /**< 0-15, Selects which bits of the 8 policer profile id bits to
-+                                                             effect using the extracted byte; Assume byte is placed
-+                                                             as the 8 MSB's in a 16 bit word where the lower bits
-+                                                             are the policer profile id; i.e if bitOffsetInPlcrProfile=1
-+                                                             than its LSB will effect the profile MSB, if bitOffsetInFqid=8
-+                                                             than the extracted byte will effect the whole policer profile id,
-+                                                             if bitOffsetInFqid=15 than the byte's MSB will effect
-+                                                             the Policer Profile id's LSB;
-+                                                             0 means - no effect on policer profile; Note that one, and only one of
-+                                                             bitOffsetInFqid or bitOffsetInPlcrProfile must be set (i.e,
-+                                                             extracted byte must effect either FQID or Policer profile).*/
-+} t_FmPcdKgExtractedOrParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for configuring a scheme counter
-+*//***************************************************************************/
-+typedef struct t_FmPcdKgSchemeCounter {
-+    bool        update;     /**< FALSE to keep the current counter state
-+                                 and continue from that point, TRUE to update/reset
-+                                 the counter when the scheme is written. */
-+    uint32_t    value;      /**< If update=TRUE, this value will be written into the
-+                                 counter. clear this field to reset the counter. */
-+} t_FmPcdKgSchemeCounter;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for configuring a policer profile for a KeyGen scheme
-+                (when policer is the next engine after this scheme).
-+*//***************************************************************************/
-+typedef struct t_FmPcdKgPlcrProfile {
-+    bool                sharedProfile;              /**< TRUE if this profile is shared between ports
-+                                                         (managed by master partition); Must not be TRUE
-+                                                         if profile is after Coarse Classification*/
-+    bool                direct;                     /**< if TRUE, directRelativeProfileId only selects the profile
-+                                                         id, if FALSE fqidOffsetRelativeProfileIdBase is used
-+                                                         together with fqidOffsetShift and numOfProfiles
-+                                                         parameters, to define a range of profiles from
-+                                                         which the KeyGen result will determine the
-+                                                         destination policer profile.  */
-+    union {
-+        uint16_t        directRelativeProfileId;    /**< Used if 'direct' is TRUE, to select policer profile.
-+                                                         should indicate the policer profile offset within the
-+                                                         port's policer profiles or shared window. */
-+        struct {
-+            uint8_t     fqidOffsetShift;            /**< Shift on the KeyGen create FQID offset (i.e. not the
-+                                                         final FQID - without the FQID base). */
-+            uint8_t     fqidOffsetRelativeProfileIdBase;
-+                                                    /**< The base of the FMan Port's relative Storage-Profile ID;
-+                                                         this value will be "OR'ed" with the KeyGen create FQID
-+                                                         offset (i.e. not the final FQID - without the FQID base);
-+                                                         the final result should indicate the Storage-Profile offset
-+                                                         within the FMan Port's relative Storage-Profiles window/
-+                                                         (or the SHARED window depends on 'sharedProfile'). */
-+            uint8_t     numOfProfiles;              /**< Range of profiles starting at base */
-+        } indirectProfile;                          /**< Indirect profile parameters */
-+    } profileSelect;                                /**< Direct/indirect profile selection and parameters */
-+} t_FmPcdKgPlcrProfile;
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Description   Parameters for configuring a storage profile for a KeyGen scheme.
-+*//***************************************************************************/
-+typedef struct t_FmPcdKgStorageProfile {
-+    bool                direct;                     /**< If TRUE, directRelativeProfileId only selects the
-+                                                         profile id;
-+                                                         If FALSE, fqidOffsetRelativeProfileIdBase is used
-+                                                         together with fqidOffsetShift and numOfProfiles
-+                                                         parameters to define a range of profiles from which
-+                                                         the KeyGen result will determine the destination
-+                                                         storage profile. */
-+    union {
-+        uint16_t        directRelativeProfileId;    /**< Used when 'direct' is TRUE, to select a storage profile;
-+                                                         should indicate the storage profile offset within the
-+                                                         port's storage profiles window. */
-+        struct {
-+            uint8_t     fqidOffsetShift;            /**< Shift on the KeyGen create FQID offset (i.e. not the
-+                                                         final FQID - without the FQID base). */
-+            uint8_t     fqidOffsetRelativeProfileIdBase;
-+                                                    /**< The base of the FMan Port's relative Storage-Profile ID;
-+                                                         this value will be "OR'ed" with the KeyGen create FQID
-+                                                         offset (i.e. not the final FQID - without the FQID base);
-+                                                         the final result should indicate the Storage-Profile offset
-+                                                         within the FMan Port's relative Storage-Profiles window. */
-+            uint8_t     numOfProfiles;              /**< Range of profiles starting at base. */
-+        } indirectProfile;                          /**< Indirect profile parameters. */
-+    } profileSelect;                                /**< Direct/indirect profile selection and parameters. */
-+} t_FmPcdKgStorageProfile;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining CC as the next engine after KeyGen
-+*//***************************************************************************/
-+typedef struct t_FmPcdKgCc {
-+    t_Handle                h_CcTree;                       /**< A handle to a CC Tree */
-+    uint8_t                 grpId;                          /**< CC group id within the CC tree */
-+    bool                    plcrNext;                       /**< TRUE if after CC, in case of data frame,
-+                                                                 policing is required. */
-+    bool                    bypassPlcrProfileGeneration;    /**< TRUE to bypass KeyGen policer profile generation;
-+                                                                 selected profile is the one set at port initialization. */
-+    t_FmPcdKgPlcrProfile    plcrProfile;                    /**< Valid only if plcrNext = TRUE and
-+                                                                 bypassPlcrProfileGeneration = FALSE */
-+} t_FmPcdKgCc;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining initializing a KeyGen scheme
-+*//***************************************************************************/
-+typedef struct t_FmPcdKgSchemeParams {
-+    bool                                modify;                 /**< TRUE to change an existing scheme */
-+    union
-+    {
-+        uint8_t                         relativeSchemeId;       /**< if modify=FALSE:Partition relative scheme id */
-+        t_Handle                        h_Scheme;               /**< if modify=TRUE: a handle of the existing scheme */
-+    } id;
-+    bool                                alwaysDirect;           /**< This scheme is reached only directly, i.e. no need
-+                                                                     for match vector; KeyGen will ignore it when matching */
-+    struct {                                                    /**< HL Relevant only if alwaysDirect = FALSE */
-+        t_Handle                        h_NetEnv;               /**< A handle to the Network environment as returned
-+                                                                     by FM_PCD_NetEnvCharacteristicsSet() */
-+        uint8_t                         numOfDistinctionUnits;  /**< Number of NetEnv units listed in unitIds array */
-+        uint8_t                         unitIds[FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS];
-+                                                                /**< Indexes as passed to SetNetEnvCharacteristics array*/
-+    } netEnvParams;
-+    bool                                useHash;                /**< use the KeyGen Hash functionality  */
-+    t_FmPcdKgKeyExtractAndHashParams    keyExtractAndHashParams;
-+                                                                /**< used only if useHash = TRUE */
-+    bool                                bypassFqidGeneration;   /**< Normally - FALSE, TRUE to avoid FQID update in the IC;
-+                                                                     In such a case FQID after KeyGen will be the default FQID
-+                                                                     defined for the relevant port, or the FQID defined by CC
-+                                                                     in cases where CC was the previous engine. */
-+    uint32_t                            baseFqid;               /**< Base FQID; Relevant only if bypassFqidGeneration = FALSE;
-+                                                                     If hash is used and an even distribution is expected
-+                                                                     according to hashDistributionNumOfFqids, baseFqid must be aligned to
-+                                                                     hashDistributionNumOfFqids. */
-+    uint8_t                             numOfUsedExtractedOrs;  /**< Number of FQID masks listed in extractedOrs array */
-+    t_FmPcdKgExtractedOrParams          extractedOrs[FM_PCD_KG_NUM_OF_GENERIC_REGS];
-+                                                                /**< FM_PCD_KG_NUM_OF_GENERIC_REGS
-+                                                                     registers are shared between qidMasks
-+                                                                     functionality and some of the extraction
-+                                                                     actions; Normally only some will be used
-+                                                                     for qidMask. Driver will return error if
-+                                                                     resource is full at initialization time. */
-+
-+#if (DPAA_VERSION >= 11)
-+    bool                                overrideStorageProfile; /**< TRUE if KeyGen override previously decided storage profile */
-+    t_FmPcdKgStorageProfile             storageProfile;         /**< Used when overrideStorageProfile TRUE */
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    e_FmPcdEngine                       nextEngine;             /**< may be BMI, PLCR or CC */
-+    union {                                                     /**< depends on nextEngine */
-+        e_FmPcdDoneAction               doneAction;             /**< Used when next engine is BMI (done) */
-+        t_FmPcdKgPlcrProfile            plcrProfile;            /**< Used when next engine is PLCR */
-+        t_FmPcdKgCc                     cc;                     /**< Used when next engine is CC */
-+    } kgNextEngineParams;
-+    t_FmPcdKgSchemeCounter              schemeCounter;          /**< A structure of parameters for updating
-+                                                                     the scheme counter */
-+} t_FmPcdKgSchemeParams;
-+
-+/**************************************************************************//**
-+ @Collection    Definitions for CC statistics
-+*//***************************************************************************/
-+#if (DPAA_VERSION >= 11)
-+#define FM_PCD_CC_STATS_MAX_NUM_OF_FLR      10  /* Maximal supported number of frame length ranges */
-+#define FM_PCD_CC_STATS_FLR_SIZE            2   /* Size in bytes of a frame length range limit */
-+#endif /* (DPAA_VERSION >= 11) */
-+#define FM_PCD_CC_STATS_COUNTER_SIZE        4   /* Size in bytes of a frame length range counter */
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining CC as the next engine after a CC node.
-+*//***************************************************************************/
-+typedef struct t_FmPcdCcNextCcParams {
-+    t_Handle    h_CcNode;               /**< A handle of the next CC node */
-+} t_FmPcdCcNextCcParams;
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Description   Parameters for defining Frame replicator as the next engine after a CC node.
-+*//***************************************************************************/
-+typedef struct t_FmPcdCcNextFrParams {
-+    t_Handle    h_FrmReplic;               /**< A handle of the next frame replicator group */
-+} t_FmPcdCcNextFrParams;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining Policer as the next engine after a CC node.
-+*//***************************************************************************/
-+typedef struct t_FmPcdCcNextPlcrParams {
-+    bool        overrideParams;         /**< TRUE if CC override previously decided parameters*/
-+    bool        sharedProfile;          /**< Relevant only if overrideParams=TRUE:
-+                                             TRUE if this profile is shared between ports */
-+    uint16_t    newRelativeProfileId;   /**< Relevant only if overrideParams=TRUE:
-+                                             (otherwise profile id is taken from KeyGen);
-+                                             This parameter should indicate the policer
-+                                             profile offset within the port's
-+                                             policer profiles or from SHARED window.*/
-+    uint32_t    newFqid;                /**< Relevant only if overrideParams=TRUE:
-+                                             FQID for enqueuing the frame;
-+                                             In earlier chips  if policer next engine is KEYGEN,
-+                                             this parameter can be 0, because the KEYGEN
-+                                             always decides the enqueue FQID.*/
-+#if (DPAA_VERSION >= 11)
-+    uint8_t     newRelativeStorageProfileId;
-+                                        /**< Indicates the relative storage profile offset within
-+                                             the port's storage profiles window;
-+                                             Relevant only if the port was configured with VSP. */
-+#endif /* (DPAA_VERSION >= 11) */
-+} t_FmPcdCcNextPlcrParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining enqueue as the next action after a CC node.
-+*//***************************************************************************/
-+typedef struct t_FmPcdCcNextEnqueueParams {
-+    e_FmPcdDoneAction    action;        /**< Action - when next engine is BMI (done) */
-+    bool                 overrideFqid;  /**< TRUE if CC override previously decided fqid and vspid,
-+                                             relevant if action = e_FM_PCD_ENQ_FRAME */
-+    uint32_t             newFqid;       /**< Valid if overrideFqid=TRUE, FQID for enqueuing the frame
-+                                             (otherwise FQID is taken from KeyGen),
-+                                             relevant if action = e_FM_PCD_ENQ_FRAME */
-+#if (DPAA_VERSION >= 11)
-+    uint8_t              newRelativeStorageProfileId;
-+                                        /**< Valid if overrideFqid=TRUE, Indicates the relative virtual
-+                                             storage profile offset within the port's storage profiles
-+                                             window; Relevant only if the port was configured with VSP. */
-+#endif /* (DPAA_VERSION >= 11) */
-+} t_FmPcdCcNextEnqueueParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining KeyGen as the next engine after a CC node.
-+*//***************************************************************************/
-+typedef struct t_FmPcdCcNextKgParams {
-+    bool        overrideFqid;           /**< TRUE if CC override previously decided fqid and vspid,
-+                                             Note - this parameters irrelevant for earlier chips */
-+    uint32_t    newFqid;                /**< Valid if overrideFqid=TRUE, FQID for enqueuing the frame
-+                                             (otherwise FQID is taken from KeyGen),
-+                                             Note - this parameters irrelevant for earlier chips */
-+#if (DPAA_VERSION >= 11)
-+    uint8_t     newRelativeStorageProfileId;
-+                                        /**< Valid if overrideFqid=TRUE, Indicates the relative virtual
-+                                             storage profile offset within the port's storage profiles
-+                                             window; Relevant only if the port was configured with VSP. */
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    t_Handle    h_DirectScheme;         /**< Direct scheme handle to go to. */
-+} t_FmPcdCcNextKgParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining the next engine after a CC node.
-+*//***************************************************************************/
-+typedef struct t_FmPcdCcNextEngineParams {
-+    e_FmPcdEngine                       nextEngine;     /**< User has to initialize parameters
-+                                                             according to nextEngine definition */
-+    union {
-+        t_FmPcdCcNextCcParams           ccParams;       /**< Parameters in case next engine is CC */
-+        t_FmPcdCcNextPlcrParams         plcrParams;     /**< Parameters in case next engine is PLCR */
-+        t_FmPcdCcNextEnqueueParams      enqueueParams;  /**< Parameters in case next engine is BMI */
-+        t_FmPcdCcNextKgParams           kgParams;       /**< Parameters in case next engine is KG */
-+#if (DPAA_VERSION >= 11)
-+        t_FmPcdCcNextFrParams           frParams;       /**< Parameters in case next engine is FR */
-+#endif /* (DPAA_VERSION >= 11) */
-+    } params;                                           /**< union used for all the next-engine parameters options */
-+
-+    t_Handle                            h_Manip;        /**< Handle to Manipulation object.
-+                                                             Relevant if next engine is of type result
-+                                                             (e_FM_PCD_PLCR, e_FM_PCD_KG, e_FM_PCD_DONE) */
-+
-+    bool                                statisticsEn;   /**< If TRUE, statistics counters are incremented
-+                                                             for each frame passing through this
-+                                                             Coarse Classification entry. */
-+} t_FmPcdCcNextEngineParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a single CC key
-+*//***************************************************************************/
-+typedef struct t_FmPcdCcKeyParams {
-+    uint8_t                     *p_Key;     /**< Relevant only if 'action' = e_FM_PCD_ACTION_EXACT_MATCH;
-+                                                 pointer to the key of the size defined in keySize */
-+    uint8_t                     *p_Mask;    /**< Relevant only if 'action' = e_FM_PCD_ACTION_EXACT_MATCH;
-+                                                 pointer to the Mask per key  of the size defined
-+                                                 in keySize. p_Key and p_Mask (if defined) has to be
-+                                                 of the same size defined in the keySize;
-+                                                 NOTE that if this value is equal for all entries whithin
-+                                                 this table, the driver will automatically use global-mask
-+                                                 (i.e. one common mask for all entries) instead of private
-+                                                 one; that is done in order to spare some memory and for
-+                                                 better performance. */
-+    t_FmPcdCcNextEngineParams   ccNextEngineParams;
-+                                            /**< parameters for the next for the defined Key in
-+                                                 the p_Key */
-+} t_FmPcdCcKeyParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining CC keys parameters
-+                The driver supports two methods for CC node allocation: dynamic and static.
-+                Static mode was created in order to prevent runtime alloc/free
-+                of FMan memory (MURAM), which may cause fragmentation; in this mode,
-+                the driver automatically allocates the memory according to
-+                'maxNumOfKeys' parameter. The driver calculates the maximal memory
-+                size that may be used for this CC-Node taking into consideration
-+                'maskSupport' and 'statisticsMode' parameters.
-+                When 'action' = e_FM_PCD_ACTION_INDEXED_LOOKUP in the extraction
-+                parameters of this node, 'maxNumOfKeys' must be equal to 'numOfKeys'.
-+                In dynamic mode, 'maxNumOfKeys' must be zero. At initialization,
-+                all required structures are allocated according to 'numOfKeys'
-+                parameter. During runtime modification, these structures are
-+                re-allocated according to the updated number of keys.
-+
-+                Please note that 'action' and 'icIndxMask' mentioned in the
-+                specific parameter explanations are passed in the extraction
-+                parameters of the node (fields of extractCcParams.extractNonHdr).
-+*//***************************************************************************/
-+typedef struct t_KeysParams {
-+    uint16_t                    maxNumOfKeys;   /**< Maximum number of keys that will (ever) be used in this CC-Node;
-+                                                     A value of zero may be used for dynamic memory allocation. */
-+    bool                        maskSupport;    /**< This parameter is relevant only if a node is initialized with
-+                                                     'action' = e_FM_PCD_ACTION_EXACT_MATCH and maxNumOfKeys > 0;
-+                                                     Should be TRUE to reserve table memory for key masks, even if
-+                                                     initial keys do not contain masks, or if the node was initialized
-+                                                     as 'empty' (without keys); this will allow user to add keys with
-+                                                     masks at runtime.
-+                                                     NOTE that if user want to use only global-masks (i.e. one common mask
-+                                                     for all the entries within this table, this parameter should set to 'FALSE'. */
-+    e_FmPcdCcStatsMode          statisticsMode; /**< Determines the supported statistics mode for all node's keys.
-+                                                     To enable statistics gathering, statistics should be enabled per
-+                                                     every key, using 'statisticsEn' in next engine parameters structure
-+                                                     of that key;
-+                                                     If 'maxNumOfKeys' is set, all required structures will be
-+                                                     preallocated for all keys. */
-+#if (DPAA_VERSION >= 11)
-+    uint16_t                    frameLengthRanges[FM_PCD_CC_STATS_MAX_NUM_OF_FLR];
-+                                                /**< Relevant only for 'RMON' statistics mode
-+                                                     (this feature is supported only on B4860 device);
-+                                                     Holds a list of programmable thresholds - for each received frame,
-+                                                     its length in bytes is examined against these range thresholds and
-+                                                     the appropriate counter is incremented by 1 - for example, to belong
-+                                                     to range i, the following should hold:
-+                                                     range i-1 threshold < frame length <= range i threshold
-+                                                     Each range threshold must be larger then its preceding range
-+                                                     threshold, and last range threshold must be 0xFFFF. */
-+#endif /* (DPAA_VERSION >= 11) */
-+    uint16_t                    numOfKeys;      /**< Number of initial keys;
-+                                                     Note that in case of 'action' = e_FM_PCD_ACTION_INDEXED_LOOKUP,
-+                                                     this field should be power-of-2 of the number of bits that are
-+                                                     set in 'icIndxMask'. */
-+    uint8_t                     keySize;        /**< Size of key - for extraction of type FULL_FIELD, 'keySize' has
-+                                                     to be the standard size of the selected key; For other extraction
-+                                                     types, 'keySize' has to be as size of extraction; When 'action' =
-+                                                     e_FM_PCD_ACTION_INDEXED_LOOKUP, 'keySize' must be 2. */
-+    t_FmPcdCcKeyParams          keyParams[FM_PCD_MAX_NUM_OF_KEYS];
-+                                                /**< An array with 'numOfKeys' entries, each entry specifies the
-+                                                     corresponding key parameters;
-+                                                     When 'action' = e_FM_PCD_ACTION_EXACT_MATCH, this value must not
-+                                                     exceed 255 (FM_PCD_MAX_NUM_OF_KEYS-1) as the last entry is saved
-+                                                     for the 'miss' entry. */
-+    t_FmPcdCcNextEngineParams   ccNextEngineParamsForMiss;
-+                                                /**< Parameters for defining the next engine when a key is not matched;
-+                                                     Not relevant if action = e_FM_PCD_ACTION_INDEXED_LOOKUP. */
-+} t_KeysParams;
-+
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a CC node
-+*//***************************************************************************/
-+typedef struct t_FmPcdCcNodeParams {
-+    t_FmPcdExtractEntry         extractCcParams;    /**< Extraction parameters */
-+    t_KeysParams                keysParams;         /**< Keys definition matching the selected extraction */
-+} t_FmPcdCcNodeParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a hash table
-+*//***************************************************************************/
-+typedef struct t_FmPcdHashTableParams {
-+    uint16_t                    maxNumOfKeys;               /**< Maximum Number Of Keys that will (ever) be used in this Hash-table */
-+    e_FmPcdCcStatsMode          statisticsMode;             /**< If not e_FM_PCD_CC_STATS_MODE_NONE, the required structures for the
-+                                                                 requested statistics mode will be allocated according to maxNumOfKeys. */
-+    uint8_t                     kgHashShift;                /**< KG-Hash-shift as it was configured in the KG-scheme
-+                                                                 that leads to this hash-table. */
-+    uint16_t                    hashResMask;                /**< Mask that will be used on the hash-result;
-+                                                                 The number-of-sets for this hash will be calculated
-+                                                                 as (2^(number of bits set in 'hashResMask'));
-+                                                                 The 4 lower bits must be cleared. */
-+    uint8_t                     hashShift;                  /**< Byte offset from the beginning of the KeyGen hash result to the
-+                                                                 2-bytes to be used as hash index. */
-+    uint8_t                     matchKeySize;               /**< Size of the exact match keys held by the hash buckets */
-+
-+    t_FmPcdCcNextEngineParams   ccNextEngineParamsForMiss;  /**< Parameters for defining the next engine when a key is not matched */
-+
-+} t_FmPcdHashTableParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a CC tree group.
-+
-+                This structure defines a CC group in terms of NetEnv units
-+                and the action to be taken in each case. The unitIds list must
-+                be given in order from low to high indices.
-+
-+                t_FmPcdCcNextEngineParams is a list of 2^numOfDistinctionUnits
-+                structures where each defines the next action to be taken for
-+                each units combination. for example:
-+                numOfDistinctionUnits = 2
-+                unitIds = {1,3}
-+                p_NextEnginePerEntriesInGrp[0] = t_FmPcdCcNextEngineParams for the case that
-+                                                        unit 1 - not found; unit 3 - not found;
-+                p_NextEnginePerEntriesInGrp[1] = t_FmPcdCcNextEngineParams for the case that
-+                                                        unit 1 - not found; unit 3 - found;
-+                p_NextEnginePerEntriesInGrp[2] = t_FmPcdCcNextEngineParams for the case that
-+                                                        unit 1 - found; unit 3 - not found;
-+                p_NextEnginePerEntriesInGrp[3] = t_FmPcdCcNextEngineParams for the case that
-+                                                        unit 1 - found; unit 3 - found;
-+*//***************************************************************************/
-+typedef struct t_FmPcdCcGrpParams {
-+    uint8_t                     numOfDistinctionUnits;          /**< Up to 4 */
-+    uint8_t                     unitIds[FM_PCD_MAX_NUM_OF_CC_UNITS];
-+                                                                /**< Indices of the units as defined in
-+                                                                     FM_PCD_NetEnvCharacteristicsSet() */
-+    t_FmPcdCcNextEngineParams   nextEnginePerEntriesInGrp[FM_PCD_MAX_NUM_OF_CC_ENTRIES_IN_GRP];
-+                                                                /**< Maximum entries per group is 16 */
-+} t_FmPcdCcGrpParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining CC tree groups
-+*//***************************************************************************/
-+typedef struct t_FmPcdCcTreeParams {
-+    t_Handle                h_NetEnv;                   /**< A handle to the Network environment as returned
-+                                                             by FM_PCD_NetEnvCharacteristicsSet() */
-+    uint8_t                 numOfGrps;                  /**< Number of CC groups within the CC tree */
-+    t_FmPcdCcGrpParams      ccGrpParams[FM_PCD_MAX_NUM_OF_CC_GROUPS];
-+                                                        /**< Parameters for each group. */
-+} t_FmPcdCcTreeParams;
-+
-+
-+/**************************************************************************//**
-+ @Description   CC key statistics structure
-+*//***************************************************************************/
-+typedef struct t_FmPcdCcKeyStatistics {
-+    uint32_t    byteCount;      /**< This counter reflects byte count of frames that
-+                                     were matched by this key. */
-+    uint32_t    frameCount;     /**< This counter reflects count of frames that
-+                                     were matched by this key. */
-+#if (DPAA_VERSION >= 11)
-+    uint32_t    frameLengthRangeCount[FM_PCD_CC_STATS_MAX_NUM_OF_FLR];
-+                                /**< These counters reflect how many frames matched
-+                                     this key in 'RMON' statistics mode:
-+                                     Each counter holds the number of frames of a
-+                                     specific frames length range, according to the
-+                                     ranges provided at initialization. */
-+#endif /* (DPAA_VERSION >= 11) */
-+} t_FmPcdCcKeyStatistics;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining policer byte rate
-+*//***************************************************************************/
-+typedef struct t_FmPcdPlcrByteRateModeParams {
-+    e_FmPcdPlcrFrameLengthSelect    frameLengthSelection;   /**< Frame length selection */
-+    e_FmPcdPlcrRollBackFrameSelect  rollBackFrameSelection; /**< relevant option only e_FM_PCD_PLCR_L2_FRM_LEN,
-+                                                                 e_FM_PCD_PLCR_FULL_FRM_LEN */
-+} t_FmPcdPlcrByteRateModeParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining the policer profile (based on
-+                RFC-2698 or RFC-4115 attributes).
-+*//***************************************************************************/
-+typedef struct t_FmPcdPlcrNonPassthroughAlgParams {
-+    e_FmPcdPlcrRateMode              rateMode;                       /**< Byte mode or Packet mode */
-+    t_FmPcdPlcrByteRateModeParams    byteModeParams;                 /**< Valid for Byte NULL for Packet */
-+    uint32_t                         committedInfoRate;              /**< KBits/Second or Packets/Second */
-+    uint32_t                         committedBurstSize;             /**< Bytes/Packets */
-+    uint32_t                         peakOrExcessInfoRate;           /**< KBits/Second or Packets/Second */
-+    uint32_t                         peakOrExcessBurstSize;          /**< Bytes/Packets */
-+} t_FmPcdPlcrNonPassthroughAlgParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining the next engine after policer
-+*//***************************************************************************/
-+typedef union u_FmPcdPlcrNextEngineParams {
-+    e_FmPcdDoneAction               action;             /**< Action - when next engine is BMI (done) */
-+    t_Handle                        h_Profile;          /**< Policer profile handle -  used when next engine
-+                                                             is Policer, must be a SHARED profile */
-+    t_Handle                        h_DirectScheme;     /**< Direct scheme select - when next engine is KeyGen */
-+} u_FmPcdPlcrNextEngineParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining the policer profile entry
-+*//***************************************************************************/
-+typedef struct t_FmPcdPlcrProfileParams {
-+    bool                                modify;                     /**< TRUE to change an existing profile */
-+    union {
-+        struct {
-+            e_FmPcdProfileTypeSelection profileType;                /**< Type of policer profile */
-+            t_Handle                    h_FmPort;                   /**< Relevant for per-port profiles only */
-+            uint16_t                    relativeProfileId;          /**< Profile id - relative to shared group or to port */
-+        } newParams;                                                /**< use it when modify = FALSE */
-+        t_Handle                        h_Profile;                  /**< A handle to a profile - use it when modify=TRUE */
-+    } id;
-+    e_FmPcdPlcrAlgorithmSelection       algSelection;               /**< Profile Algorithm PASS_THROUGH, RFC_2698, RFC_4115 */
-+    e_FmPcdPlcrColorMode                colorMode;                  /**< COLOR_BLIND, COLOR_AWARE */
-+
-+    union {
-+        e_FmPcdPlcrColor                dfltColor;                  /**< For Color-Blind Pass-Through mode; the policer will re-color
-+                                                                         any incoming packet with the default value. */
-+        e_FmPcdPlcrColor                override;                   /**< For Color-Aware modes; the profile response to a
-+                                                                         pre-color value of 2'b11. */
-+    } color;
-+
-+    t_FmPcdPlcrNonPassthroughAlgParams  nonPassthroughAlgParams;    /**< RFC2698 or RFC4115 parameters */
-+
-+    e_FmPcdEngine                       nextEngineOnGreen;          /**< Next engine for green-colored frames */
-+    u_FmPcdPlcrNextEngineParams         paramsOnGreen;              /**< Next engine parameters for green-colored frames  */
-+
-+    e_FmPcdEngine                       nextEngineOnYellow;         /**< Next engine for yellow-colored frames */
-+    u_FmPcdPlcrNextEngineParams         paramsOnYellow;             /**< Next engine parameters for yellow-colored frames  */
-+
-+    e_FmPcdEngine                       nextEngineOnRed;            /**< Next engine for red-colored frames */
-+    u_FmPcdPlcrNextEngineParams         paramsOnRed;                /**< Next engine parameters for red-colored frames  */
-+
-+    bool                                trapProfileOnFlowA;         /**< Obsolete - do not use */
-+    bool                                trapProfileOnFlowB;         /**< Obsolete - do not use */
-+    bool                                trapProfileOnFlowC;         /**< Obsolete - do not use */
-+} t_FmPcdPlcrProfileParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for selecting a location for requested manipulation
-+*//***************************************************************************/
-+typedef struct t_FmManipHdrInfo {
-+    e_NetHeaderType                     hdr;            /**< Header selection */
-+    e_FmPcdHdrIndex                     hdrIndex;       /**< Relevant only for MPLS, VLAN and tunneled IP. Otherwise should be cleared. */
-+    bool                                byField;        /**< TRUE if the location of manipulation is according to some field in the specific header*/
-+    t_FmPcdFields                       fullField;      /**< Relevant only when byField = TRUE: Extract field */
-+} t_FmManipHdrInfo;
-+
-+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+/**************************************************************************//**
-+ @Description   Parameters for defining an insertion manipulation
-+                of type e_FM_PCD_MANIP_INSRT_TO_START_OF_FRAME_TEMPLATE
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrInsrtByTemplateParams {
-+    uint8_t         size;                               /**< Size of insert template to the start of the frame. */
-+    uint8_t         hdrTemplate[FM_PCD_MAX_MANIP_INSRT_TEMPLATE_SIZE];
-+                                                        /**< Array of the insertion template. */
-+
-+    bool            modifyOuterIp;                      /**< TRUE if user want to modify some fields in outer IP. */
-+    struct {
-+        uint16_t    ipOuterOffset;                      /**< Offset of outer IP in the insert template, relevant if modifyOuterIp = TRUE.*/
-+        uint16_t    dscpEcn;                            /**< value of dscpEcn in IP outer, relevant if modifyOuterIp = TRUE.
-+                                                             in IPV4 dscpEcn only byte - it has to be adjusted to the right*/
-+        bool        udpPresent;                         /**< TRUE if UDP is present in the insert template, relevant if modifyOuterIp = TRUE.*/
-+        uint8_t     udpOffset;                          /**< Offset in the insert template of UDP, relevant if modifyOuterIp = TRUE and udpPresent=TRUE.*/
-+        uint8_t     ipIdentGenId;                       /**< Used by FMan-CTRL to calculate IP-identification field,relevant if modifyOuterIp = TRUE.*/
-+        bool        recalculateLength;                  /**< TRUE if recalculate length has to be performed due to the engines in the path which can change the frame later, relevant if modifyOuterIp = TRUE.*/
-+        struct {
-+            uint8_t blockSize;                          /**< The CAAM block-size; Used by FMan-CTRL to calculate the IP Total Length field.*/
-+            uint8_t extraBytesAddedAlignedToBlockSize;  /**< Used by FMan-CTRL to calculate the IP Total Length field and UDP length*/
-+            uint8_t extraBytesAddedNotAlignedToBlockSize;/**< Used by FMan-CTRL to calculate the IP Total Length field and UDP length.*/
-+        } recalculateLengthParams;                      /**< Recalculate length parameters - relevant if modifyOuterIp = TRUE and recalculateLength = TRUE */
-+    } modifyOuterIpParams;                              /**< Outer IP modification parameters - ignored if modifyOuterIp is FALSE */
-+
-+    bool            modifyOuterVlan;                    /**< TRUE if user wants to modify VPri field in the outer VLAN header*/
-+    struct {
-+        uint8_t     vpri;                               /**< Value of VPri, relevant if modifyOuterVlan = TRUE
-+                                                             VPri only 3 bits, it has to be adjusted to the right*/
-+    } modifyOuterVlanParams;
-+} t_FmPcdManipHdrInsrtByTemplateParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining CAPWAP fragmentation
-+*//***************************************************************************/
-+typedef struct t_CapwapFragmentationParams {
-+    uint16_t         sizeForFragmentation;              /**< if length of the frame is greater than this value, CAPWAP fragmentation will be executed.*/
-+    bool             headerOptionsCompr;                /**< TRUE - first fragment include the CAPWAP header options field,
-+                                                             and all other fragments exclude the CAPWAP options field,
-+                                                             FALSE - all fragments include CAPWAP header options field. */
-+} t_CapwapFragmentationParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining CAPWAP reassembly
-+*//***************************************************************************/
-+typedef struct t_CapwapReassemblyParams {
-+    uint16_t                        maxNumFramesInProcess;  /**< Number of frames which can be reassembled concurrently; must be power of 2.
-+                                                                 In case numOfFramesPerHashEntry == e_FM_PCD_MANIP_FOUR_WAYS_HASH,
-+                                                                 maxNumFramesInProcess has to be in the range of 4 - 512,
-+                                                                 In case numOfFramesPerHashEntry == e_FM_PCD_MANIP_EIGHT_WAYS_HASH,
-+                                                                 maxNumFramesInProcess has to be in the range of 8 - 2048 */
-+    bool                            haltOnDuplicationFrag;  /**< If TRUE, reassembly process will be halted due to duplicated fragment,
-+                                                                 and all processed fragments will be enqueued with error indication;
-+                                                                 If FALSE, only duplicated fragments will be enqueued with error indication. */
-+
-+    e_FmPcdManipReassemTimeOutMode  timeOutMode;            /**< Expiration delay initialized by the reassembly process */
-+    uint32_t                        fqidForTimeOutFrames;   /**< FQID in which time out frames will enqueue during Time Out Process  */
-+    uint32_t                        timeoutRoutineRequestTime;
-+                                                            /**< Represents the time interval in microseconds between consecutive
-+                                                                 timeout routine requests It has to be power of 2. */
-+    uint32_t                        timeoutThresholdForReassmProcess;
-+                                                            /**< Time interval (microseconds) for marking frames in process as too old;
-+                                                                 Frames in process are those for which at least one fragment was received
-+                                                                 but not all fragments. */
-+
-+    e_FmPcdManipReassemWaysNumber   numOfFramesPerHashEntry;/**< Number of frames per hash entry (needed for the reassembly process) */
-+} t_CapwapReassemblyParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining fragmentation/reassembly manipulation
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipFragOrReasmParams {
-+    bool                                frag;               /**< TRUE if using the structure for fragmentation,
-+                                                                 otherwise this structure is used for reassembly */
-+    uint8_t                             sgBpid;             /**< Scatter/Gather buffer pool id;
-+                                                                 Same LIODN number is used for these buffers as for
-+                                                                 the received frames buffers, so buffers of this pool
-+                                                                 need to be allocated in the same memory area as the
-+                                                                 received buffers. If the received buffers arrive
-+                                                                 from different sources, the Scatter/Gather BP id
-+                                                                 should be mutual to all these sources. */
-+    e_NetHeaderType                     hdr;                /**< Header selection */
-+    union {
-+        t_CapwapFragmentationParams     capwapFragParams;   /**< Structure for CAPWAP fragmentation,
-+                                                                 relevant if 'frag' = TRUE, 'hdr' = HEADER_TYPE_CAPWAP */
-+        t_CapwapReassemblyParams        capwapReasmParams;  /**< Structure for CAPWAP reassembly,
-+                                                                 relevant if 'frag' = FALSE, 'hdr' = HEADER_TYPE_CAPWAP */
-+    } u;
-+} t_FmPcdManipFragOrReasmParams;
-+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
-+
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header removal by header type
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrRmvByHdrParams {
-+    e_FmPcdManipHdrRmvByHdrType         type;           /**< Selection of header removal location */
-+    union {
-+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+        struct {
-+            bool                        include;        /**< If FALSE, remove until the specified header (not including the header);
-+                                                             If TRUE, remove also the specified header. */
-+            t_FmManipHdrInfo            hdrInfo;
-+        } fromStartByHdr;                               /**< Relevant when type = e_FM_PCD_MANIP_RMV_BY_HDR_FROM_START */
-+#endif /* (DPAA_VERSION >= 11) || ... */
-+#if (DPAA_VERSION >= 11)
-+        t_FmManipHdrInfo                hdrInfo;        /**< Relevant when type = e_FM_PCD_MANIP_RMV_BY_HDR_FROM_START */
-+#endif /* (DPAA_VERSION >= 11) */
-+        e_FmPcdManipHdrRmvSpecificL2    specificL2;     /**< Relevant when type = e_FM_PCD_MANIP_BY_HDR_SPECIFIC_L2;
-+                                                             Defines which L2 headers to remove. */
-+    } u;
-+} t_FmPcdManipHdrRmvByHdrParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for configuring IP fragmentation manipulation
-+
-+ Restrictions:
-+     - IP Fragmentation output fragments must not be forwarded to application directly.
-+     - Maximum number of fragments per frame is 16.
-+     - Fragmentation of IP fragments is not supported.
-+     - IPv4 packets containing header Option fields are fragmented by copying all option
-+       fields to each fragment, regardless of the copy bit value.
-+     - Transmit confirmation is not supported.
-+     - Fragmentation after SEC can't handle S/G frames.
-+     - Fragmentation nodes must be set as the last PCD action (i.e. the
-+       corresponding CC node key must have next engine set to e_FM_PCD_DONE).
-+     - Only BMan buffers shall be used for frames to be fragmented.
-+     - IPF does not support VSP. Therefore, on the same port where we have IPF
-+       we cannot support VSP.
-+     - NOTE: The following comment is relevant only for FMAN v3 devices: IPF
-+       does not support VSP. Therefore, on the same port where we have IPF we
-+       cannot support VSP.
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipFragIpParams {
-+    uint16_t                    sizeForFragmentation;   /**< If length of the frame is greater than this value,
-+                                                             IP fragmentation will be executed.*/
-+#if (DPAA_VERSION == 10)
-+    uint8_t                     scratchBpid;            /**< Absolute buffer pool id according to BM configuration.*/
-+#endif /* (DPAA_VERSION == 10) */
-+    bool                        sgBpidEn;               /**< Enable a dedicated buffer pool id for the Scatter/Gather buffer allocation;
-+                                                             If disabled, the Scatter/Gather buffer will be allocated from the same pool as the
-+                                                             received frame's buffer. */
-+    uint8_t                     sgBpid;                 /**< Scatter/Gather buffer pool id;
-+                                                             This parameters is relevant when 'sgBpidEn=TRUE';
-+                                                             Same LIODN number is used for these buffers as for the received frames buffers, so buffers
-+                                                             of this pool need to be allocated in the same memory area as the received buffers.
-+                                                             If the received buffers arrive from different sources, the Scatter/Gather BP id should be
-+                                                             mutual to all these sources. */
-+    e_FmPcdManipDontFragAction  dontFragAction;         /**< Don't Fragment Action - If an IP packet is larger
-+                                                             than MTU and its DF bit is set, then this field will
-+                                                             determine the action to be taken.*/
-+} t_FmPcdManipFragIpParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for configuring IP reassembly manipulation.
-+
-+                This is a common structure for both IPv4 and IPv6 reassembly
-+                manipulation. For reassembly of both IPv4 and IPv6, make sure to
-+                set the 'hdr' field in t_FmPcdManipReassemParams to HEADER_TYPE_IPv6.
-+
-+ Restrictions:
-+    - Application must define at least one scheme to catch the reassembled frames.
-+    - Maximum number of fragments per frame is 16.
-+    - Reassembly of IPv4 fragments containing Option fields is supported.
-+
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipReassemIpParams {
-+    uint8_t                         relativeSchemeId[2];    /**< Partition relative scheme id:
-+                                                                 relativeSchemeId[0] -  Relative scheme ID for IPV4 Reassembly manipulation;
-+                                                                 relativeSchemeId[1] -  Relative scheme ID for IPV6 Reassembly manipulation;
-+                                                                 NOTE: The following comment is relevant only for FMAN v2 devices:
-+                                                                 Relative scheme ID for IPv4/IPv6 Reassembly manipulation must be smaller than
-+                                                                 the user schemes id to ensure that the reassembly schemes will be first match;
-+                                                                 Rest schemes, if defined, should have higher relative scheme ID. */
-+#if (DPAA_VERSION >= 11)
-+    uint32_t                        nonConsistentSpFqid;    /**< In case that other fragments of the frame corresponds to different storage
-+                                                                 profile than the opening fragment (Non-Consistent-SP state)
-+                                                                 then one of two possible scenarios occurs:
-+                                                                 if 'nonConsistentSpFqid != 0', the reassembled frame will be enqueued to
-+                                                                 this fqid, otherwise a 'Non Consistent SP' bit will be set in the FD[status].*/
-+#else
-+    uint8_t                         sgBpid;                 /**< Buffer pool id for the S/G frame created by the reassembly process */
-+#endif /* (DPAA_VERSION >= 11) */
-+    uint8_t                         dataMemId;              /**< Memory partition ID for the IPR's external tables structure */
-+    uint16_t                        dataLiodnOffset;        /**< LIODN offset for access the IPR's external tables structure. */
-+    uint16_t                        minFragSize[2];         /**< Minimum fragment size:
-+                                                                 minFragSize[0] - for ipv4, minFragSize[1] - for ipv6 */
-+    e_FmPcdManipReassemWaysNumber   numOfFramesPerHashEntry[2];
-+                                                            /**< Number of frames per hash entry needed for reassembly process:
-+                                                                 numOfFramesPerHashEntry[0] - for ipv4 (max value is e_FM_PCD_MANIP_EIGHT_WAYS_HASH);
-+                                                                 numOfFramesPerHashEntry[1] - for ipv6 (max value is e_FM_PCD_MANIP_SIX_WAYS_HASH). */
-+    uint16_t                        maxNumFramesInProcess;  /**< Number of frames which can be processed by Reassembly in the same time;
-+                                                                 Must be power of 2;
-+                                                                 In the case numOfFramesPerHashEntry == e_FM_PCD_MANIP_FOUR_WAYS_HASH,
-+                                                                 maxNumFramesInProcess has to be in the range of 4 - 512;
-+                                                                 In the case numOfFramesPerHashEntry == e_FM_PCD_MANIP_EIGHT_WAYS_HASH,
-+                                                                 maxNumFramesInProcess has to be in the range of 8 - 2048. */
-+    e_FmPcdManipReassemTimeOutMode  timeOutMode;            /**< Expiration delay initialized by Reassembly process */
-+    uint32_t                        fqidForTimeOutFrames;   /**< FQID in which time out frames will enqueue during Time Out Process;
-+                                                                 Recommended value for this field is 0; in this way timed-out frames will be discarded */
-+    uint32_t                        timeoutThresholdForReassmProcess;
-+                                                            /**< Represents the time interval in microseconds which defines
-+                                                                 if opened frame (at least one fragment was processed but not all the fragments)is found as too old*/
-+} t_FmPcdManipReassemIpParams;
-+
-+/**************************************************************************//**
-+ @Description   structure for defining IPSEC manipulation
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipSpecialOffloadIPSecParams {
-+    bool        decryption;                     /**< TRUE if being used in decryption direction;
-+                                                     FALSE if being used in encryption direction. */
-+    bool        ecnCopy;                        /**< TRUE to copy the ECN bits from inner/outer to outer/inner
-+                                                     (direction depends on the 'decryption' field). */
-+    bool        dscpCopy;                       /**< TRUE to copy the DSCP bits from inner/outer to outer/inner
-+                                                     (direction depends on the 'decryption' field). */
-+    bool        variableIpHdrLen;               /**< TRUE for supporting variable IP header length in decryption. */
-+    bool        variableIpVersion;              /**< TRUE for supporting both IP version on the same SA in encryption */
-+    uint8_t     outerIPHdrLen;                  /**< if 'variableIpVersion == TRUE' then this field must be set to non-zero value;
-+                                                     It is specifies the length of the outer IP header that was configured in the
-+                                                     corresponding SA. */
-+    uint16_t    arwSize;                        /**< if <> '0' then will perform ARW check for this SA;
-+                                                     The value must be a multiplication of 16 */
-+    uintptr_t   arwAddr;                        /**< if arwSize <> '0' then this field must be set to non-zero value;
-+                                                     MUST be allocated from FMAN's MURAM that the post-sec op-port belongs to;
-+                                                     Must be 4B aligned. Required MURAM size is 'NEXT_POWER_OF_2(arwSize+32))/8+4' Bytes */
-+} t_FmPcdManipSpecialOffloadIPSecParams;
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Description   Parameters for configuring CAPWAP fragmentation manipulation
-+
-+ Restrictions:
-+     - Maximum number of fragments per frame is 16.
-+     - Transmit confirmation is not supported.
-+     - Fragmentation nodes must be set as the last PCD action (i.e. the
-+       corresponding CC node key must have next engine set to e_FM_PCD_DONE).
-+     - Only BMan buffers shall be used for frames to be fragmented.
-+     - NOTE: The following comment is relevant only for FMAN v3 devices: IPF
-+       does not support VSP. Therefore, on the same port where we have IPF we
-+       cannot support VSP.
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipFragCapwapParams {
-+    uint16_t                    sizeForFragmentation;   /**< If length of the frame is greater than this value,
-+                                                             CAPWAP fragmentation will be executed.*/
-+    bool                        sgBpidEn;               /**< Enable a dedicated buffer pool id for the Scatter/Gather buffer allocation;
-+                                                             If disabled, the Scatter/Gather buffer will be allocated from the same pool as the
-+                                                             received frame's buffer. */
-+    uint8_t                     sgBpid;                 /**< Scatter/Gather buffer pool id;
-+                                                             This parameters is relevant when 'sgBpidEn=TRUE';
-+                                                             Same LIODN number is used for these buffers as for the received frames buffers, so buffers
-+                                                             of this pool need to be allocated in the same memory area as the received buffers.
-+                                                             If the received buffers arrive from different sources, the Scatter/Gather BP id should be
-+                                                             mutual to all these sources. */
-+    bool                        compressModeEn;         /**< CAPWAP Header Options Compress Enable mode;
-+                                                             When this mode is enabled then only the first fragment include the CAPWAP header options
-+                                                             field (if user provides it in the input frame) and all other fragments exclude the CAPWAP
-+                                                             options field (CAPWAP header is updated accordingly).*/
-+} t_FmPcdManipFragCapwapParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for configuring CAPWAP reassembly manipulation.
-+
-+ Restrictions:
-+    - Application must define one scheme to catch the reassembled frames.
-+    - Maximum number of fragments per frame is 16.
-+
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipReassemCapwapParams {
-+    uint8_t                         relativeSchemeId;    /**< Partition relative scheme id;
-+                                                                 NOTE: this id must be smaller than the user schemes id to ensure that the reassembly scheme will be first match;
-+                                                                 Rest schemes, if defined, should have higher relative scheme ID. */
-+    uint8_t                         dataMemId;              /**< Memory partition ID for the IPR's external tables structure */
-+    uint16_t                        dataLiodnOffset;        /**< LIODN offset for access the IPR's external tables structure. */
-+    uint16_t                        maxReassembledFrameLength;/**< The maximum CAPWAP reassembled frame length in bytes;
-+                                                                   If maxReassembledFrameLength == 0, any successful reassembled frame length is
-+                                                                   considered as a valid length;
-+                                                                   if maxReassembledFrameLength > 0, a successful reassembled frame which its length
-+                                                                   exceeds this value is considered as an error frame (FD status[CRE] bit is set). */
-+    e_FmPcdManipReassemWaysNumber   numOfFramesPerHashEntry;
-+                                                            /**< Number of frames per hash entry needed for reassembly process */
-+    uint16_t                        maxNumFramesInProcess;  /**< Number of frames which can be processed by reassembly in the same time;
-+                                                                 Must be power of 2;
-+                                                                 In the case numOfFramesPerHashEntry == e_FM_PCD_MANIP_FOUR_WAYS_HASH,
-+                                                                 maxNumFramesInProcess has to be in the range of 4 - 512;
-+                                                                 In the case numOfFramesPerHashEntry == e_FM_PCD_MANIP_EIGHT_WAYS_HASH,
-+                                                                 maxNumFramesInProcess has to be in the range of 8 - 2048. */
-+    e_FmPcdManipReassemTimeOutMode  timeOutMode;            /**< Expiration delay initialized by Reassembly process */
-+    uint32_t                        fqidForTimeOutFrames;   /**< FQID in which time out frames will enqueue during Time Out Process;
-+                                                                 Recommended value for this field is 0; in this way timed-out frames will be discarded */
-+    uint32_t                        timeoutThresholdForReassmProcess;
-+                                                            /**< Represents the time interval in microseconds which defines
-+                                                                 if opened frame (at least one fragment was processed but not all the fragments)is found as too old*/
-+} t_FmPcdManipReassemCapwapParams;
-+
-+/**************************************************************************//**
-+ @Description   structure for defining CAPWAP manipulation
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipSpecialOffloadCapwapParams {
-+    bool                    dtls;   /**< TRUE if continue to SEC DTLS encryption */
-+    e_FmPcdManipHdrQosSrc   qosSrc; /**< TODO */
-+} t_FmPcdManipSpecialOffloadCapwapParams;
-+
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining special offload manipulation
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipSpecialOffloadParams {
-+    e_FmPcdManipSpecialOffloadType              type;       /**< Type of special offload manipulation */
-+    union
-+    {
-+        t_FmPcdManipSpecialOffloadIPSecParams   ipsec;      /**< Parameters for IPSec; Relevant when
-+                                                                 type = e_FM_PCD_MANIP_SPECIAL_OFFLOAD_IPSEC */
-+#if (DPAA_VERSION >= 11)
-+        t_FmPcdManipSpecialOffloadCapwapParams  capwap;     /**< Parameters for CAPWAP; Relevant when
-+                                                                 type = e_FM_PCD_MANIP_SPECIAL_OFFLOAD_CAPWAP */
-+#endif /* (DPAA_VERSION >= 11) */
-+    } u;
-+} t_FmPcdManipSpecialOffloadParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining insertion manipulation
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrInsrt {
-+    uint8_t size;           /**< size of inserted section */
-+    uint8_t *p_Data;        /**< data to be inserted */
-+} t_FmPcdManipHdrInsrt;
-+
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining generic removal manipulation
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrRmvGenericParams {
-+    uint8_t                         offset;         /**< Offset from beginning of header to the start
-+                                                         location of the removal */
-+    uint8_t                         size;           /**< Size of removed section */
-+} t_FmPcdManipHdrRmvGenericParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining generic insertion manipulation
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrInsrtGenericParams {
-+    uint8_t                         offset;         /**< Offset from beginning of header to the start
-+                                                         location of the insertion */
-+    uint8_t                         size;           /**< Size of inserted section */
-+    bool                            replace;        /**< TRUE to override (replace) existing data at
-+                                                         'offset', FALSE to insert */
-+    uint8_t                         *p_Data;        /**< Pointer to data to be inserted */
-+} t_FmPcdManipHdrInsrtGenericParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header manipulation VLAN DSCP To Vpri translation
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrFieldUpdateVlanDscpToVpri {
-+    uint8_t                         dscpToVpriTable[FM_PCD_MANIP_DSCP_TO_VLAN_TRANS];
-+                                                        /**< A table of VPri values for each DSCP value;
-+                                                             The index is the DSCP value (0-0x3F) and the
-+                                                             value is the corresponding VPRI (0-15). */
-+    uint8_t                         vpriDefVal;         /**< 0-7, Relevant only if if updateType =
-+                                                             e_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN,
-+                                                             this field is the Q Tag default value if the
-+                                                             IP header is not found. */
-+} t_FmPcdManipHdrFieldUpdateVlanDscpToVpri;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header manipulation VLAN fields updates
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrFieldUpdateVlan {
-+    e_FmPcdManipHdrFieldUpdateVlan                  updateType; /**< Selects VLAN update type */
-+    union {
-+        uint8_t                                     vpri;       /**< 0-7, Relevant only if If updateType =
-+                                                                     e_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN_PRI, this
-+                                                                     is the new VLAN pri. */
-+        t_FmPcdManipHdrFieldUpdateVlanDscpToVpri    dscpToVpri; /**< Parameters structure, Relevant only if updateType
-+                                                                     = e_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN. */
-+    } u;
-+} t_FmPcdManipHdrFieldUpdateVlan;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header manipulation IPV4 fields updates
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrFieldUpdateIpv4 {
-+    ipv4HdrManipUpdateFlags_t       validUpdates;       /**< ORed flag, selecting the required updates */
-+    uint8_t                         tos;                /**< 8 bit New TOS; Relevant if validUpdates contains
-+                                                             HDR_MANIP_IPV4_TOS */
-+    uint16_t                        id;                 /**< 16 bit New IP ID; Relevant only if validUpdates
-+                                                             contains HDR_MANIP_IPV4_ID */
-+    uint32_t                        src;                /**< 32 bit New IP SRC; Relevant only if validUpdates
-+                                                             contains HDR_MANIP_IPV4_SRC */
-+    uint32_t                        dst;                /**< 32 bit New IP DST; Relevant only if validUpdates
-+                                                             contains HDR_MANIP_IPV4_DST */
-+} t_FmPcdManipHdrFieldUpdateIpv4;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header manipulation IPV6 fields updates
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrFieldUpdateIpv6 {
-+    ipv6HdrManipUpdateFlags_t   validUpdates;           /**< ORed flag, selecting the required updates */
-+    uint8_t                     trafficClass;           /**< 8 bit New Traffic Class; Relevant if validUpdates contains
-+                                                             HDR_MANIP_IPV6_TC */
-+    uint8_t                     src[NET_HEADER_FIELD_IPv6_ADDR_SIZE];
-+                                                        /**< 16 byte new IP SRC; Relevant only if validUpdates
-+                                                             contains HDR_MANIP_IPV6_SRC */
-+    uint8_t                     dst[NET_HEADER_FIELD_IPv6_ADDR_SIZE];
-+                                                        /**< 16 byte new IP DST; Relevant only if validUpdates
-+                                                             contains HDR_MANIP_IPV6_DST */
-+} t_FmPcdManipHdrFieldUpdateIpv6;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header manipulation TCP/UDP fields updates
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrFieldUpdateTcpUdp {
-+    tcpUdpHdrManipUpdateFlags_t     validUpdates;       /**< ORed flag, selecting the required updates */
-+    uint16_t                        src;                /**< 16 bit New TCP/UDP SRC; Relevant only if validUpdates
-+                                                             contains HDR_MANIP_TCP_UDP_SRC */
-+    uint16_t                        dst;                /**< 16 bit New TCP/UDP DST; Relevant only if validUpdates
-+                                                             contains HDR_MANIP_TCP_UDP_DST */
-+} t_FmPcdManipHdrFieldUpdateTcpUdp;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header manipulation fields updates
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrFieldUpdateParams {
-+    e_FmPcdManipHdrFieldUpdateType                  type;           /**< Type of header field update manipulation */
-+    union {
-+        t_FmPcdManipHdrFieldUpdateVlan              vlan;           /**< Parameters for VLAN update. Relevant when
-+                                                                         type = e_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN */
-+        t_FmPcdManipHdrFieldUpdateIpv4              ipv4;           /**< Parameters for IPv4 update. Relevant when
-+                                                                         type = e_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV4 */
-+        t_FmPcdManipHdrFieldUpdateIpv6              ipv6;           /**< Parameters for IPv6 update. Relevant when
-+                                                                         type = e_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV6 */
-+        t_FmPcdManipHdrFieldUpdateTcpUdp            tcpUdp;         /**< Parameters for TCP/UDP update. Relevant when
-+                                                                         type = e_FM_PCD_MANIP_HDR_FIELD_UPDATE_TCP_UDP */
-+    } u;
-+} t_FmPcdManipHdrFieldUpdateParams;
-+
-+
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining custom header manipulation for generic field replacement
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrCustomGenFieldReplace {
-+    uint8_t                         srcOffset;          /**< Location of new data - Offset from
-+                                                             Parse Result  (>= 16, srcOffset+size <= 32, ) */
-+    uint8_t                         dstOffset;          /**< Location of data to be overwritten - Offset from
-+                                                             start of frame (dstOffset + size <= 256). */
-+    uint8_t                         size;               /**< The number of bytes (<=16) to be replaced */
-+    uint8_t                         mask;               /**< Optional 1 byte mask. Set to select bits for
-+                                                             replacement (1 - bit will be replaced);
-+                                                             Clear to use field as is. */
-+    uint8_t                         maskOffset;         /**< Relevant if mask != 0;
-+                                                             Mask offset within the replaces "size" */
-+} t_FmPcdManipHdrCustomGenFieldReplace;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining custom header manipulation for IP replacement
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrCustomIpHdrReplace {
-+    e_FmPcdManipHdrCustomIpReplace  replaceType;        /**< Selects replace update type */
-+    bool                            decTtlHl;           /**< Decrement TTL (IPV4) or Hop limit (IPV6) by 1  */
-+    bool                            updateIpv4Id;       /**< Relevant when replaceType =
-+                                                             e_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV6_BY_IPV4 */
-+    uint16_t                        id;                 /**< 16 bit New IP ID; Relevant only if
-+                                                             updateIpv4Id = TRUE */
-+    uint8_t                         hdrSize;            /**< The size of the new IP header */
-+    uint8_t                         hdr[FM_PCD_MANIP_MAX_HDR_SIZE];
-+                                                        /**< The new IP header */
-+} t_FmPcdManipHdrCustomIpHdrReplace;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining custom header manipulation
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrCustomParams {
-+    e_FmPcdManipHdrCustomType                   type;           /**< Type of header field update manipulation */
-+    union {
-+        t_FmPcdManipHdrCustomIpHdrReplace       ipHdrReplace;   /**< Parameters IP header replacement */
-+        t_FmPcdManipHdrCustomGenFieldReplace    genFieldReplace;   /**< Parameters IP header replacement */
-+    } u;
-+} t_FmPcdManipHdrCustomParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining specific L2 insertion manipulation
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrInsrtSpecificL2Params {
-+    e_FmPcdManipHdrInsrtSpecificL2  specificL2;     /**< Selects which L2 headers to insert */
-+    bool                            update;         /**< TRUE to update MPLS header */
-+    uint8_t                         size;           /**< size of inserted section */
-+    uint8_t                         *p_Data;        /**< data to be inserted */
-+} t_FmPcdManipHdrInsrtSpecificL2Params;
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Description   Parameters for defining IP insertion manipulation
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrInsrtIpParams {
-+    bool                            calcL4Checksum; /**< Calculate L4 checksum. */
-+    e_FmPcdManipHdrQosMappingMode   mappingMode;    /**< TODO */
-+    uint8_t                         lastPidOffset;  /**< the offset of the last Protocol within
-+                                                         the inserted header */
-+    uint16_t                        id;         /**< 16 bit New IP ID */
-+    bool                            dontFragOverwrite;
-+    /**< IPv4 only. DF is overwritten with the hash-result next-to-last byte.
-+     * This byte is configured to be overwritten when RPD is set. */
-+    uint8_t                         lastDstOffset;
-+    /**< IPv6 only. if routing extension exist, user should set the offset of the destination address
-+     * in order to calculate UDP checksum pseudo header;
-+     * Otherwise set it to '0'. */
-+    t_FmPcdManipHdrInsrt            insrt;      /**< size and data to be inserted. */
-+} t_FmPcdManipHdrInsrtIpParams;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header insertion manipulation by header type
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrInsrtByHdrParams {
-+    e_FmPcdManipHdrInsrtByHdrType               type;   /**< Selects manipulation type */
-+    union {
-+
-+        t_FmPcdManipHdrInsrtSpecificL2Params    specificL2Params;
-+                                                             /**< Used when type = e_FM_PCD_MANIP_INSRT_BY_HDR_SPECIFIC_L2:
-+                                                              Selects which L2 headers to insert */
-+#if (DPAA_VERSION >= 11)
-+        t_FmPcdManipHdrInsrtIpParams            ipParams;  /**< Used when type = e_FM_PCD_MANIP_INSRT_BY_HDR_IP */
-+        t_FmPcdManipHdrInsrt                    insrt;     /**< Used when type is one of e_FM_PCD_MANIP_INSRT_BY_HDR_UDP,
-+                                                                e_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE, or
-+                                                                e_FM_PCD_MANIP_INSRT_BY_HDR_CAPWAP */
-+#endif /* (DPAA_VERSION >= 11) */
-+    } u;
-+} t_FmPcdManipHdrInsrtByHdrParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header insertion manipulation
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrInsrtParams {
-+    e_FmPcdManipHdrInsrtType                    type;       /**< Type of insertion manipulation */
-+    union {
-+        t_FmPcdManipHdrInsrtByHdrParams         byHdr;      /**< Parameters for defining header insertion manipulation by header type,
-+                                                                 relevant if 'type' = e_FM_PCD_MANIP_INSRT_BY_HDR */
-+        t_FmPcdManipHdrInsrtGenericParams       generic;    /**< Parameters for defining generic header insertion manipulation,
-+                                                                 relevant if 'type' = e_FM_PCD_MANIP_INSRT_GENERIC */
-+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+        t_FmPcdManipHdrInsrtByTemplateParams    byTemplate; /**< Parameters for defining header insertion manipulation by template,
-+                                                                 relevant if 'type' = e_FM_PCD_MANIP_INSRT_BY_TEMPLATE */
-+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
-+    } u;
-+} t_FmPcdManipHdrInsrtParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header removal manipulation
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrRmvParams {
-+    e_FmPcdManipHdrRmvType                  type;       /**< Type of header removal manipulation */
-+    union {
-+        t_FmPcdManipHdrRmvByHdrParams       byHdr;      /**< Parameters for defining header removal manipulation by header type,
-+                                                             relevant if type = e_FM_PCD_MANIP_RMV_BY_HDR */
-+        t_FmPcdManipHdrRmvGenericParams     generic;    /**< Parameters for defining generic header removal manipulation,
-+                                                             relevant if type = e_FM_PCD_MANIP_RMV_GENERIC */
-+    } u;
-+} t_FmPcdManipHdrRmvParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header manipulation node
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipHdrParams {
-+    bool                                        rmv;                /**< TRUE, to define removal manipulation */
-+    t_FmPcdManipHdrRmvParams                    rmvParams;          /**< Parameters for removal manipulation, relevant if 'rmv' = TRUE */
-+
-+    bool                                        insrt;              /**< TRUE, to define insertion manipulation */
-+    t_FmPcdManipHdrInsrtParams                  insrtParams;        /**< Parameters for insertion manipulation, relevant if 'insrt' = TRUE */
-+
-+    bool                                        fieldUpdate;        /**< TRUE, to define field update manipulation */
-+    t_FmPcdManipHdrFieldUpdateParams            fieldUpdateParams;  /**< Parameters for field update manipulation, relevant if 'fieldUpdate' = TRUE */
-+
-+    bool                                        custom;             /**< TRUE, to define custom manipulation */
-+    t_FmPcdManipHdrCustomParams                 customParams;       /**< Parameters for custom manipulation, relevant if 'custom' = TRUE */
-+
-+    bool                                        dontParseAfterManip;/**< TRUE to de-activate the parser after the manipulation defined in this node.
-+                                                                                          Restrictions:
-+                                                                                          1. MUST be set if the next engine after the CC is not another CC node
-+                                                                                          (but rather Policer or Keygen), and this is the last (no h_NextManip) in a chain
-+                                                                                          of manipulation nodes. This includes single nodes (i.e. no h_NextManip and
-+                                                                                          also never pointed as h_NextManip of other manipulation nodes)
-+                                                                                          2. MUST be set if the next engine after the CC is another CC node, and
-+                                                                                          this is NOT the last manipulation node (i.e. it has h_NextManip).*/
-+} t_FmPcdManipHdrParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining fragmentation manipulation
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipFragParams {
-+    e_NetHeaderType                     hdr;          /**< Header selection */
-+    union {
-+#if (DPAA_VERSION >= 11)
-+        t_FmPcdManipFragCapwapParams    capwapFrag;   /**< Parameters for defining CAPWAP fragmentation,
-+                                                           relevant if 'hdr' = HEADER_TYPE_CAPWAP */
-+#endif /* (DPAA_VERSION >= 11) */
-+        t_FmPcdManipFragIpParams        ipFrag;       /**< Parameters for defining IP fragmentation,
-+                                                           relevant if 'hdr' = HEADER_TYPE_Ipv4 or HEADER_TYPE_Ipv6 */
-+    } u;
-+} t_FmPcdManipFragParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining reassembly manipulation
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipReassemParams {
-+    e_NetHeaderType                     hdr;          /**< Header selection */
-+    union {
-+#if (DPAA_VERSION >= 11)
-+        t_FmPcdManipReassemCapwapParams capwapReassem;  /**< Parameters for defining CAPWAP reassembly,
-+                                                           relevant if 'hdr' = HEADER_TYPE_CAPWAP */
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+        t_FmPcdManipReassemIpParams     ipReassem;    /**< Parameters for defining IP reassembly,
-+                                                           relevant if 'hdr' = HEADER_TYPE_Ipv4 or HEADER_TYPE_Ipv6 */
-+    } u;
-+} t_FmPcdManipReassemParams;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a manipulation node
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipParams {
-+    e_FmPcdManipType                        type;               /**< Selects type of manipulation node */
-+    union{
-+        t_FmPcdManipHdrParams               hdr;                /**< Parameters for defining header manipulation node */
-+        t_FmPcdManipReassemParams           reassem;            /**< Parameters for defining reassembly manipulation node */
-+        t_FmPcdManipFragParams              frag;               /**< Parameters for defining fragmentation manipulation node */
-+        t_FmPcdManipSpecialOffloadParams    specialOffload;     /**< Parameters for defining special offload manipulation node */
-+    } u;
-+
-+    t_Handle                                h_NextManip;        /**< Supported for Header Manipulation only;
-+                                                                     Handle to another (previously defined) manipulation node;
-+                                                                     Allows concatenation of manipulation actions;
-+                                                                     This parameter is optional and may be NULL. */
-+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+    bool                                    fragOrReasm;        /**< TRUE, if defined fragmentation/reassembly manipulation */
-+    t_FmPcdManipFragOrReasmParams           fragOrReasmParams;  /**< Parameters for fragmentation/reassembly manipulation,
-+                                                                     relevant if fragOrReasm = TRUE */
-+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
-+} t_FmPcdManipParams;
-+
-+/**************************************************************************//**
-+ @Description   Structure for retrieving IP reassembly statistics
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipReassemIpStats {
-+    /* common counters for both IPv4 and IPv6 */
-+    uint32_t        timeout;                    /**< Counts the number of timeout occurrences */
-+    uint32_t        rfdPoolBusy;                /**< Counts the number of failed attempts to allocate
-+                                                     a Reassembly Frame Descriptor */
-+    uint32_t        internalBufferBusy;         /**< Counts the number of times an internal buffer busy occurred */
-+    uint32_t        externalBufferBusy;         /**< Counts the number of times external buffer busy occurred */
-+    uint32_t        sgFragments;                /**< Counts the number of Scatter/Gather fragments */
-+    uint32_t        dmaSemaphoreDepletion;      /**< Counts the number of failed attempts to allocate a DMA semaphore */
-+#if (DPAA_VERSION >= 11)
-+    uint32_t        nonConsistentSp;            /**< Counts the number of Non Consistent Storage Profile events for
-+                                                     successfully reassembled frames */
-+#endif /* (DPAA_VERSION >= 11) */
-+    struct {
-+        uint32_t    successfullyReassembled;    /**< Counts the number of successfully reassembled frames */
-+        uint32_t    validFragments;             /**< Counts the total number of valid fragments that
-+                                                     have been processed for all frames */
-+        uint32_t    processedFragments;         /**< Counts the number of processed fragments
-+                                                     (valid and error fragments) for all frames */
-+        uint32_t    malformedFragments;         /**< Counts the number of malformed fragments processed for all frames */
-+        uint32_t    discardedFragments;         /**< Counts the number of fragments discarded by the reassembly process */
-+        uint32_t    autoLearnBusy;              /**< Counts the number of times a busy condition occurs when attempting
-+                                                     to access an IP-Reassembly Automatic Learning Hash set */
-+        uint32_t    moreThan16Fragments;        /**< Counts the fragment occurrences in which the number of fragments-per-frame
-+                                                     exceeds 16 */
-+    } specificHdrStatistics[2];                 /**< slot '0' is for IPv4, slot '1' is for IPv6 */
-+} t_FmPcdManipReassemIpStats;
-+
-+/**************************************************************************//**
-+ @Description   Structure for retrieving IP fragmentation statistics
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipFragIpStats {
-+    uint32_t    totalFrames;            /**< Number of frames that passed through the manipulation node */
-+    uint32_t    fragmentedFrames;       /**< Number of frames that were fragmented */
-+    uint32_t    generatedFragments;     /**< Number of fragments that were generated */
-+} t_FmPcdManipFragIpStats;
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Description   Structure for retrieving CAPWAP reassembly statistics
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipReassemCapwapStats {
-+    uint32_t    timeout;                    /**< Counts the number of timeout occurrences */
-+    uint32_t    rfdPoolBusy;                /**< Counts the number of failed attempts to allocate
-+                                                 a Reassembly Frame Descriptor */
-+    uint32_t    internalBufferBusy;         /**< Counts the number of times an internal buffer busy occurred */
-+    uint32_t    externalBufferBusy;         /**< Counts the number of times external buffer busy occurred */
-+    uint32_t    sgFragments;                /**< Counts the number of Scatter/Gather fragments */
-+    uint32_t    dmaSemaphoreDepletion;      /**< Counts the number of failed attempts to allocate a DMA semaphore */
-+    uint32_t    successfullyReassembled;    /**< Counts the number of successfully reassembled frames */
-+    uint32_t    validFragments;             /**< Counts the total number of valid fragments that
-+                                                 have been processed for all frames */
-+    uint32_t    processedFragments;         /**< Counts the number of processed fragments
-+                                                 (valid and error fragments) for all frames */
-+    uint32_t    malformedFragments;         /**< Counts the number of malformed fragments processed for all frames */
-+    uint32_t    autoLearnBusy;              /**< Counts the number of times a busy condition occurs when attempting
-+                                                 to access an Reassembly Automatic Learning Hash set */
-+    uint32_t    discardedFragments;         /**< Counts the number of fragments discarded by the reassembly process */
-+    uint32_t    moreThan16Fragments;        /**< Counts the fragment occurrences in which the number of fragments-per-frame
-+                                                 exceeds 16 */
-+    uint32_t    exceedMaxReassemblyFrameLen;/**< ounts the number of times that a successful reassembled frame
-+                                                 length exceeds MaxReassembledFrameLength value */
-+} t_FmPcdManipReassemCapwapStats;
-+
-+/**************************************************************************//**
-+ @Description   Structure for retrieving CAPWAP fragmentation statistics
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipFragCapwapStats {
-+    uint32_t    totalFrames;            /**< Number of frames that passed through the manipulation node */
-+    uint32_t    fragmentedFrames;       /**< Number of frames that were fragmented */
-+    uint32_t    generatedFragments;     /**< Number of fragments that were generated */
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+    uint8_t     sgAllocationFailure;    /**< Number of allocation failure of s/g buffers */
-+#endif /* (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)) */
-+} t_FmPcdManipFragCapwapStats;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/**************************************************************************//**
-+ @Description   Structure for retrieving reassembly statistics
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipReassemStats {
-+    union {
-+        t_FmPcdManipReassemIpStats  ipReassem;  /**< Structure for IP reassembly statistics */
-+#if (DPAA_VERSION >= 11)
-+        t_FmPcdManipReassemCapwapStats  capwapReassem;  /**< Structure for CAPWAP reassembly statistics */
-+#endif /* (DPAA_VERSION >= 11) */
-+    } u;
-+} t_FmPcdManipReassemStats;
-+
-+/**************************************************************************//**
-+ @Description   Structure for retrieving fragmentation statistics
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipFragStats {
-+    union {
-+        t_FmPcdManipFragIpStats     ipFrag;     /**< Structure for IP fragmentation statistics */
-+#if (DPAA_VERSION >= 11)
-+        t_FmPcdManipFragCapwapStats capwapFrag; /**< Structure for CAPWAP fragmentation statistics */
-+#endif /* (DPAA_VERSION >= 11) */
-+    } u;
-+} t_FmPcdManipFragStats;
-+
-+/**************************************************************************//**
-+ @Description   Structure for selecting manipulation statistics
-+*//***************************************************************************/
-+typedef struct t_FmPcdManipStats {
-+    union {
-+        t_FmPcdManipReassemStats    reassem;    /**< Structure for reassembly statistics */
-+        t_FmPcdManipFragStats       frag;       /**< Structure for fragmentation statistics */
-+    } u;
-+} t_FmPcdManipStats;
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Description   Parameters for defining frame replicator group and its members
-+*//***************************************************************************/
-+typedef struct t_FmPcdFrmReplicGroupParams {
-+    uint8_t                     maxNumOfEntries;    /**< Maximal number of members in the group;
-+                                                         Must be at least 2. */
-+    uint8_t                     numOfEntries;       /**< Number of members in the group;
-+                                                         Must be at least 1. */
-+    t_FmPcdCcNextEngineParams   nextEngineParams[FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES];
-+                                                    /**< Array of members' parameters */
-+} t_FmPcdFrmReplicGroupParams;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+/**************************************************************************//**
-+ @Description   structure for defining statistics node
-+*//***************************************************************************/
-+typedef struct t_FmPcdStatsParams {
-+    e_FmPcdStatsType    type;   /**< type of statistics node */
-+} t_FmPcdStatsParams;
-+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_NetEnvCharacteristicsSet
-+
-+ @Description   Define a set of Network Environment Characteristics.
-+
-+                When setting an environment it is important to understand its
-+                application. It is not meant to describe the flows that will run
-+                on the ports using this environment, but what the user means TO DO
-+                with the PCD mechanisms in order to parse-classify-distribute those
-+                frames.
-+                By specifying a distinction unit, the user means it would use that option
-+                for distinction between frames at either a KeyGen scheme or a coarse
-+                classification action descriptor. Using interchangeable headers to define a
-+                unit means that the user is indifferent to which of the interchangeable
-+                headers is present in the frame, and wants the distinction to be based
-+                on the presence of either one of them.
-+
-+                Depending on context, there are limitations to the use of environments. A
-+                port using the PCD functionality is bound to an environment. Some or even
-+                all ports may share an environment but also an environment per port is
-+                possible. When initializing a scheme, a classification plan group (see below),
-+                or a coarse classification tree, one of the initialized environments must be
-+                stated and related to. When a port is bound to a scheme, a classification
-+                plan group, or a coarse classification tree, it MUST be bound to the same
-+                environment.
-+
-+                The different PCD modules, may relate (for flows definition) ONLY on
-+                distinction units as defined by their environment. When initializing a
-+                scheme for example, it may not choose to select IPV4 as a match for
-+                recognizing flows unless it was defined in the relating environment. In
-+                fact, to guide the user through the configuration of the PCD, each module's
-+                characterization in terms of flows is not done using protocol names, but using
-+                environment indexes.
-+
-+                In terms of HW implementation, the list of distinction units sets the LCV vectors
-+                and later used for match vector, classification plan vectors and coarse classification
-+                indexing.
-+
-+ @Param[in]     h_FmPcd         FM PCD module descriptor.
-+ @Param[in]     p_NetEnvParams  A structure of parameters for the initialization of
-+                                the network environment.
-+
-+ @Return        A handle to the initialized object on success; NULL code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+t_Handle FM_PCD_NetEnvCharacteristicsSet(t_Handle h_FmPcd, t_FmPcdNetEnvParams *p_NetEnvParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_NetEnvCharacteristicsDelete
-+
-+ @Description   Deletes a set of Network Environment Characteristics.
-+
-+ @Param[in]     h_NetEnv        A handle to the Network environment.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_PCD_NetEnvCharacteristicsDelete(t_Handle h_NetEnv);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_KgSchemeSet
-+
-+ @Description   Initializing or modifying and enabling a scheme for the KeyGen.
-+                This routine should be called for adding or modifying a scheme.
-+                When a scheme needs modifying, the API requires that it will be
-+                rewritten. In such a case 'modify' should be TRUE. If the
-+                routine is called for a valid scheme and 'modify' is FALSE,
-+                it will return error.
-+
-+ @Param[in]     h_FmPcd         If this is a new scheme - A handle to an FM PCD Module.
-+                                Otherwise NULL (ignored by driver).
-+ @Param[in,out] p_SchemeParams  A structure of parameters for defining the scheme
-+
-+ @Return        A handle to the initialized scheme on success; NULL code otherwise.
-+                When used as "modify" (rather than for setting a new scheme),
-+                p_SchemeParams->id.h_Scheme will return NULL if action fails due to scheme
-+                BUSY state.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+t_Handle FM_PCD_KgSchemeSet(t_Handle                h_FmPcd,
-+                            t_FmPcdKgSchemeParams   *p_SchemeParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_KgSchemeDelete
-+
-+ @Description   Deleting an initialized scheme.
-+
-+ @Param[in]     h_Scheme        scheme handle as returned by FM_PCD_KgSchemeSet()
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init() & FM_PCD_KgSchemeSet().
-+*//***************************************************************************/
-+t_Error     FM_PCD_KgSchemeDelete(t_Handle h_Scheme);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_KgSchemeGetCounter
-+
-+ @Description   Reads scheme packet counter.
-+
-+ @Param[in]     h_Scheme        scheme handle as returned by FM_PCD_KgSchemeSet().
-+
-+ @Return        Counter's current value.
-+
-+ @Cautions      Allowed only following FM_PCD_Init() & FM_PCD_KgSchemeSet().
-+*//***************************************************************************/
-+uint32_t  FM_PCD_KgSchemeGetCounter(t_Handle h_Scheme);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_KgSchemeSetCounter
-+
-+ @Description   Writes scheme packet counter.
-+
-+ @Param[in]     h_Scheme        scheme handle as returned by FM_PCD_KgSchemeSet().
-+ @Param[in]     value           New scheme counter value - typically '0' for
-+                                resetting the counter.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init() & FM_PCD_KgSchemeSet().
-+*//***************************************************************************/
-+t_Error  FM_PCD_KgSchemeSetCounter(t_Handle h_Scheme, uint32_t value);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_PlcrProfileSet
-+
-+ @Description   Sets a profile entry in the policer profile table.
-+                The routine overrides any existing value.
-+
-+ @Param[in]     h_FmPcd           A handle to an FM PCD Module.
-+ @Param[in]     p_Profile         A structure of parameters for defining a
-+                                  policer profile entry.
-+
-+ @Return        A handle to the initialized object on success; NULL code otherwise.
-+                When used as "modify" (rather than for setting a new profile),
-+                p_Profile->id.h_Profile will return NULL if action fails due to profile
-+                BUSY state.
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+t_Handle FM_PCD_PlcrProfileSet(t_Handle                  h_FmPcd,
-+                               t_FmPcdPlcrProfileParams  *p_Profile);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_PlcrProfileDelete
-+
-+ @Description   Delete a profile entry in the policer profile table.
-+                The routine set entry to invalid.
-+
-+ @Param[in]     h_Profile       A handle to the profile.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+t_Error FM_PCD_PlcrProfileDelete(t_Handle h_Profile);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_PlcrProfileGetCounter
-+
-+ @Description   Sets an entry in the classification plan.
-+                The routine overrides any existing value.
-+
-+ @Param[in]     h_Profile       A handle to the profile.
-+ @Param[in]     counter         Counter selector.
-+
-+ @Return        specific counter value.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+uint32_t FM_PCD_PlcrProfileGetCounter(t_Handle                      h_Profile,
-+                                      e_FmPcdPlcrProfileCounters    counter);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_PlcrProfileSetCounter
-+
-+ @Description   Sets an entry in the classification plan.
-+                The routine overrides any existing value.
-+
-+ @Param[in]     h_Profile       A handle to the profile.
-+ @Param[in]     counter         Counter selector.
-+ @Param[in]     value           value to set counter with.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+t_Error FM_PCD_PlcrProfileSetCounter(t_Handle                   h_Profile,
-+                                     e_FmPcdPlcrProfileCounters counter,
-+                                     uint32_t                   value);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_CcRootBuild
-+
-+ @Description   This routine must be called to define a complete coarse
-+                classification tree. This is the way to define coarse
-+                classification to a certain flow - the KeyGen schemes
-+                may point only to trees defined in this way.
-+
-+ @Param[in]     h_FmPcd         FM PCD module descriptor.
-+ @Param[in]     p_Params        A structure of parameters to define the tree.
-+
-+ @Return        A handle to the initialized object on success; NULL code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+t_Handle FM_PCD_CcRootBuild (t_Handle             h_FmPcd,
-+                             t_FmPcdCcTreeParams  *p_Params);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_CcRootDelete
-+
-+ @Description   Deleting an built tree.
-+
-+ @Param[in]     h_CcTree        A handle to a CC tree.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+t_Error FM_PCD_CcRootDelete(t_Handle h_CcTree);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_CcRootModifyNextEngine
-+
-+ @Description   Modify the Next Engine Parameters in the entry of the tree.
-+
-+ @Param[in]     h_CcTree                    A handle to the tree
-+ @Param[in]     grpId                       A Group index in the tree
-+ @Param[in]     index                       Entry index in the group defined by grpId
-+ @Param[in]     p_FmPcdCcNextEngineParams   Pointer to new next engine parameters
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_CcBuildTree().
-+*//***************************************************************************/
-+t_Error FM_PCD_CcRootModifyNextEngine(t_Handle                  h_CcTree,
-+                                      uint8_t                   grpId,
-+                                      uint8_t                   index,
-+                                      t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableSet
-+
-+ @Description   This routine should be called for each CC (coarse classification)
-+                node. The whole CC tree should be built bottom up so that each
-+                node points to already defined nodes.
-+
-+ @Param[in]     h_FmPcd         FM PCD module descriptor.
-+ @Param[in]     p_Param         A structure of parameters defining the CC node
-+
-+ @Return        A handle to the initialized object on success; NULL code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+t_Handle   FM_PCD_MatchTableSet(t_Handle h_FmPcd, t_FmPcdCcNodeParams *p_Param);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableDelete
-+
-+ @Description   Deleting an built node.
-+
-+ @Param[in]     h_CcNode        A handle to a CC node.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableDelete(t_Handle h_CcNode);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableModifyMissNextEngine
-+
-+ @Description   Modify the Next Engine Parameters of the Miss key case of the node.
-+
-+ @Param[in]     h_CcNode                    A handle to the node
-+ @Param[in]     p_FmPcdCcNextEngineParams   Parameters for defining next engine
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet();
-+                Not relevant in the case the node is of type 'INDEXED_LOOKUP'.
-+                When configuring nextEngine = e_FM_PCD_CC, note that
-+                p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different
-+                from the currently changed table.
-+
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableModifyMissNextEngine(t_Handle                  h_CcNode,
-+                                              t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableRemoveKey
-+
-+ @Description   Remove the key (including next engine parameters of this key)
-+                defined by the index of the relevant node.
-+
-+ @Param[in]     h_CcNode                    A handle to the node
-+ @Param[in]     keyIndex                    Key index for removing
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet() was called for this
-+                node and the nodes that lead to it.
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableRemoveKey(t_Handle h_CcNode, uint16_t keyIndex);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableAddKey
-+
-+ @Description   Add the key (including next engine parameters of this key in the
-+                index defined by the keyIndex. Note that 'FM_PCD_LAST_KEY_INDEX'
-+                may be used by user that don't care about the position of the
-+                key in the table - in that case, the key will be automatically
-+                added by the driver in the last available entry.
-+
-+ @Param[in]     h_CcNode     A handle to the node
-+ @Param[in]     keyIndex     Key index for adding.
-+ @Param[in]     keySize      Key size of added key
-+ @Param[in]     p_KeyParams  A pointer to the parameters includes
-+                             new key with Next Engine Parameters
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet() was called for this
-+                node and the nodes that lead to it.
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableAddKey(t_Handle            h_CcNode,
-+                                uint16_t            keyIndex,
-+                                uint8_t             keySize,
-+                                t_FmPcdCcKeyParams  *p_KeyParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableModifyNextEngine
-+
-+ @Description   Modify the Next Engine Parameters in the relevant key entry of the node.
-+
-+ @Param[in]     h_CcNode                    A handle to the node
-+ @Param[in]     keyIndex                    Key index for Next Engine modifications
-+ @Param[in]     p_FmPcdCcNextEngineParams   Parameters for defining next engine
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet().
-+                When configuring nextEngine = e_FM_PCD_CC, note that
-+                p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different
-+                from the currently changed table.
-+
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableModifyNextEngine(t_Handle                  h_CcNode,
-+                                          uint16_t                  keyIndex,
-+                                          t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableModifyKeyAndNextEngine
-+
-+ @Description   Modify the key and Next Engine Parameters of this key in the
-+                index defined by the keyIndex.
-+
-+ @Param[in]     h_CcNode                    A handle to the node
-+ @Param[in]     keyIndex                    Key index for adding
-+ @Param[in]     keySize                     Key size of added key
-+ @Param[in]     p_KeyParams                 A pointer to the parameters includes
-+                                            modified key and modified Next Engine Parameters
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet() was called for this
-+                node and the nodes that lead to it.
-+                When configuring nextEngine = e_FM_PCD_CC, note that
-+                p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different
-+                from the currently changed table.
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableModifyKeyAndNextEngine(t_Handle            h_CcNode,
-+                                                uint16_t            keyIndex,
-+                                                uint8_t             keySize,
-+                                                t_FmPcdCcKeyParams  *p_KeyParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableModifyKey
-+
-+ @Description   Modify the key in the index defined by the keyIndex.
-+
-+ @Param[in]     h_CcNode                    A handle to the node
-+ @Param[in]     keyIndex                    Key index for adding
-+ @Param[in]     keySize                     Key size of added key
-+ @Param[in]     p_Key                       A pointer to the new key
-+ @Param[in]     p_Mask                      A pointer to the new mask if relevant,
-+                                            otherwise pointer to NULL
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet() was called for this
-+                node and the nodes that lead to it.
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableModifyKey(t_Handle h_CcNode,
-+                                   uint16_t keyIndex,
-+                                   uint8_t  keySize,
-+                                   uint8_t  *p_Key,
-+                                   uint8_t  *p_Mask);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableFindNRemoveKey
-+
-+ @Description   Remove the key (including next engine parameters of this key)
-+                defined by the key and mask. Note that this routine will search
-+                the node to locate the index of the required key (& mask) to remove.
-+
-+ @Param[in]     h_CcNode                    A handle to the node
-+ @Param[in]     keySize                     Key size of the one to remove.
-+ @Param[in]     p_Key                       A pointer to the requested key to remove.
-+ @Param[in]     p_Mask                      A pointer to the mask if relevant,
-+                                            otherwise pointer to NULL
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet() was called for this
-+                node and the nodes that lead to it.
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableFindNRemoveKey(t_Handle h_CcNode,
-+                                        uint8_t  keySize,
-+                                        uint8_t  *p_Key,
-+                                        uint8_t  *p_Mask);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableFindNModifyNextEngine
-+
-+ @Description   Modify the Next Engine Parameters in the relevant key entry of
-+                the node. Note that this routine will search the node to locate
-+                the index of the required key (& mask) to modify.
-+
-+ @Param[in]     h_CcNode                    A handle to the node
-+ @Param[in]     keySize                     Key size of the one to modify.
-+ @Param[in]     p_Key                       A pointer to the requested key to modify.
-+ @Param[in]     p_Mask                      A pointer to the mask if relevant,
-+                                            otherwise pointer to NULL
-+ @Param[in]     p_FmPcdCcNextEngineParams   Parameters for defining next engine
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet().
-+                When configuring nextEngine = e_FM_PCD_CC, note that
-+                p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different
-+                from the currently changed table.
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableFindNModifyNextEngine(t_Handle                  h_CcNode,
-+                                               uint8_t                   keySize,
-+                                               uint8_t                   *p_Key,
-+                                               uint8_t                   *p_Mask,
-+                                               t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableFindNModifyKeyAndNextEngine
-+
-+ @Description   Modify the key and Next Engine Parameters of this key in the
-+                index defined by the keyIndex. Note that this routine will search
-+                the node to locate the index of the required key (& mask) to modify.
-+
-+ @Param[in]     h_CcNode                    A handle to the node
-+ @Param[in]     keySize                     Key size of the one to modify.
-+ @Param[in]     p_Key                       A pointer to the requested key to modify.
-+ @Param[in]     p_Mask                      A pointer to the mask if relevant,
-+                                            otherwise pointer to NULL
-+ @Param[in]     p_KeyParams                 A pointer to the parameters includes
-+                                            modified key and modified Next Engine Parameters
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet() was called for this
-+                node and the nodes that lead to it.
-+                When configuring nextEngine = e_FM_PCD_CC, note that
-+                p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different
-+                from the currently changed table.
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableFindNModifyKeyAndNextEngine(t_Handle            h_CcNode,
-+                                                     uint8_t             keySize,
-+                                                     uint8_t             *p_Key,
-+                                                     uint8_t             *p_Mask,
-+                                                     t_FmPcdCcKeyParams  *p_KeyParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableFindNModifyKey
-+
-+ @Description   Modify the key  in the index defined by the keyIndex. Note that
-+                this routine will search the node to locate the index of the
-+                required key (& mask) to modify.
-+
-+ @Param[in]     h_CcNode                    A handle to the node
-+ @Param[in]     keySize                     Key size of the one to modify.
-+ @Param[in]     p_Key                       A pointer to the requested key to modify.
-+ @Param[in]     p_Mask                      A pointer to the mask if relevant,
-+                                            otherwise pointer to NULL
-+ @Param[in]     p_NewKey                    A pointer to the new key
-+ @Param[in]     p_NewMask                   A pointer to the new mask if relevant,
-+                                            otherwise pointer to NULL
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet() was called for this
-+                node and the nodes that lead to it.
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableFindNModifyKey(t_Handle h_CcNode,
-+                                        uint8_t  keySize,
-+                                        uint8_t  *p_Key,
-+                                        uint8_t  *p_Mask,
-+                                        uint8_t  *p_NewKey,
-+                                        uint8_t  *p_NewMask);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableGetKeyCounter
-+
-+ @Description   This routine may be used to get a counter of specific key in a CC
-+                Node; This counter reflects how many frames passed that were matched
-+                this key.
-+
-+ @Param[in]     h_CcNode        A handle to the node
-+ @Param[in]     keyIndex        Key index for adding
-+
-+ @Return        The specific key counter.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet().
-+*//***************************************************************************/
-+uint32_t FM_PCD_MatchTableGetKeyCounter(t_Handle h_CcNode, uint16_t keyIndex);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableGetKeyStatistics
-+
-+ @Description   This routine may be used to get statistics counters of specific key
-+                in a CC Node.
-+
-+                If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
-+                'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
-+                these counters reflect how many frames passed that were matched
-+                this key; The total frames count will be returned in the counter
-+                of the first range (as only one frame length range was defined).
-+                If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for this node, the total
-+                frame count will be separated to frame length counters, based on
-+                provided frame length ranges.
-+
-+ @Param[in]     h_CcNode        A handle to the node
-+ @Param[in]     keyIndex        Key index for adding
-+ @Param[out]    p_KeyStatistics Key statistics counters
-+
-+ @Return        The specific key statistics.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet().
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableGetKeyStatistics(t_Handle                  h_CcNode,
-+                                          uint16_t                  keyIndex,
-+                                          t_FmPcdCcKeyStatistics    *p_KeyStatistics);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableGetMissStatistics
-+
-+ @Description   This routine may be used to get statistics counters of miss entry
-+                in a CC Node.
-+
-+                If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
-+                'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
-+                these counters reflect how many frames were not matched to any
-+                existing key and therefore passed through the miss entry; The
-+                total frames count will be returned in the counter of the
-+                first range (as only one frame length range was defined).
-+
-+ @Param[in]     h_CcNode            A handle to the node
-+ @Param[out]    p_MissStatistics    Statistics counters for 'miss'
-+
-+ @Return        The statistics for 'miss'.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet().
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableGetMissStatistics(t_Handle                  h_CcNode,
-+                                           t_FmPcdCcKeyStatistics    *p_MissStatistics);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableFindNGetKeyStatistics
-+
-+ @Description   This routine may be used to get statistics counters of specific key
-+                in a CC Node.
-+
-+                If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
-+                'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
-+                these counters reflect how many frames passed that were matched
-+                this key; The total frames count will be returned in the counter
-+                of the first range (as only one frame length range was defined).
-+                If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for this node, the total
-+                frame count will be separated to frame length counters, based on
-+                provided frame length ranges.
-+                Note that this routine will search the node to locate the index
-+                of the required key based on received key parameters.
-+
-+ @Param[in]     h_CcNode        A handle to the node
-+ @Param[in]     keySize         Size of the requested key
-+ @Param[in]     p_Key           A pointer to the requested key
-+ @Param[in]     p_Mask          A pointer to the mask if relevant,
-+                                otherwise pointer to NULL
-+ @Param[out]    p_KeyStatistics Key statistics counters
-+
-+ @Return        The specific key statistics.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet().
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableFindNGetKeyStatistics(t_Handle                 h_CcNode,
-+                                               uint8_t                  keySize,
-+                                               uint8_t                  *p_Key,
-+                                               uint8_t                  *p_Mask,
-+                                               t_FmPcdCcKeyStatistics   *p_KeyStatistics);
-+
-+/**************************************************************************//*
-+ @Function      FM_PCD_MatchTableGetNextEngine
-+
-+ @Description   Gets NextEngine of the relevant keyIndex.
-+
-+ @Param[in]     h_CcNode                    A handle to the node.
-+ @Param[in]     keyIndex                    keyIndex in the relevant node.
-+ @Param[out]    p_FmPcdCcNextEngineParams   here updated nextEngine parameters for
-+                                            the relevant keyIndex of the CC Node
-+                                            received as parameter to this function
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableGetNextEngine(t_Handle                     h_CcNode,
-+                                       uint16_t                     keyIndex,
-+                                       t_FmPcdCcNextEngineParams    *p_FmPcdCcNextEngineParams);
-+
-+/**************************************************************************//*
-+ @Function      FM_PCD_MatchTableGetIndexedHashBucket
-+
-+ @Description   This routine simulates KeyGen operation on the provided key and
-+                calculates to which hash bucket it will be mapped.
-+
-+ @Param[in]     h_CcNode                A handle to the node.
-+ @Param[in]     kgKeySize               Key size as it was configured in the KG
-+                                        scheme that leads to this hash.
-+ @Param[in]     p_KgKey                 Pointer to the key; must be like the key
-+                                        that the KG is generated, i.e. the same
-+                                        extraction and with mask if exist.
-+ @Param[in]     kgHashShift             Hash-shift as it was configured in the KG
-+                                        scheme that leads to this hash.
-+ @Param[out]    p_CcNodeBucketHandle    Pointer to the bucket of the provided key.
-+ @Param[out]    p_BucketIndex           Index to the bucket of the provided key
-+ @Param[out]    p_LastIndex             Pointer to last index in the bucket of the
-+                                        provided key.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_HashTableSet()
-+*//***************************************************************************/
-+t_Error FM_PCD_MatchTableGetIndexedHashBucket(t_Handle    h_CcNode,
-+                                              uint8_t     kgKeySize,
-+                                              uint8_t     *p_KgKey,
-+                                              uint8_t     kgHashShift,
-+                                              t_Handle    *p_CcNodeBucketHandle,
-+                                              uint8_t     *p_BucketIndex,
-+                                              uint16_t    *p_LastIndex);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_HashTableSet
-+
-+ @Description   This routine initializes a hash table structure.
-+                KeyGen hash result determines the hash bucket.
-+                Next, KeyGen key is compared against all keys of this
-+                bucket (exact match).
-+                Number of sets (number of buckets) of the hash equals to the
-+                number of 1-s in 'hashResMask' in the provided parameters.
-+                Number of hash table ways is then calculated by dividing
-+                'maxNumOfKeys' equally between the hash sets. This is the maximal
-+                number of keys that a hash bucket may hold.
-+                The hash table is initialized empty and keys may be
-+                added to it following the initialization. Keys masks are not
-+                supported in current hash table implementation.
-+                The initialized hash table can be integrated as a node in a
-+                CC tree.
-+
-+ @Param[in]     h_FmPcd     FM PCD module descriptor.
-+ @Param[in]     p_Param     A structure of parameters defining the hash table
-+
-+ @Return        A handle to the initialized object on success; NULL code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+t_Handle FM_PCD_HashTableSet(t_Handle h_FmPcd, t_FmPcdHashTableParams *p_Param);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_HashTableDelete
-+
-+ @Description   This routine deletes the provided hash table and released all
-+                its allocated resources.
-+
-+ @Param[in]     h_HashTbl       A handle to a hash table
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_HashTableSet().
-+*//***************************************************************************/
-+t_Error FM_PCD_HashTableDelete(t_Handle h_HashTbl);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_HashTableAddKey
-+
-+ @Description   This routine adds the provided key (including next engine
-+                parameters of this key) to the hash table.
-+                The key is added as the last key of the bucket that it is
-+                mapped to.
-+
-+ @Param[in]     h_HashTbl    A handle to a hash table
-+ @Param[in]     keySize      Key size of added key
-+ @Param[in]     p_KeyParams  A pointer to the parameters includes
-+                             new key with next engine parameters; The pointer
-+                             to the key mask must be NULL, as masks are not
-+                             supported in hash table implementation.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_HashTableSet().
-+*//***************************************************************************/
-+t_Error FM_PCD_HashTableAddKey(t_Handle            h_HashTbl,
-+                               uint8_t             keySize,
-+                               t_FmPcdCcKeyParams  *p_KeyParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_HashTableRemoveKey
-+
-+ @Description   This routine removes the requested key (including next engine
-+                parameters of this key) from the hash table.
-+
-+ @Param[in]     h_HashTbl    A handle to a hash table
-+ @Param[in]     keySize      Key size of the one to remove.
-+ @Param[in]     p_Key        A pointer to the requested key to remove.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_HashTableSet().
-+*//***************************************************************************/
-+t_Error FM_PCD_HashTableRemoveKey(t_Handle h_HashTbl,
-+                                  uint8_t  keySize,
-+                                  uint8_t  *p_Key);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_HashTableModifyNextEngine
-+
-+ @Description   This routine modifies the next engine for the provided key. The
-+                key should be previously added to the hash table.
-+
-+ @Param[in]     h_HashTbl                   A handle to a hash table
-+ @Param[in]     keySize                     Key size of the key to modify.
-+ @Param[in]     p_Key                       A pointer to the requested key to modify.
-+ @Param[in]     p_FmPcdCcNextEngineParams   A structure for defining new next engine
-+                                            parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_HashTableSet().
-+                When configuring nextEngine = e_FM_PCD_CC, note that
-+                p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different
-+                from the currently changed table.
-+*//***************************************************************************/
-+t_Error FM_PCD_HashTableModifyNextEngine(t_Handle                  h_HashTbl,
-+                                         uint8_t                   keySize,
-+                                         uint8_t                   *p_Key,
-+                                         t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_HashTableModifyMissNextEngine
-+
-+ @Description   This routine modifies the next engine on key match miss.
-+
-+ @Param[in]     h_HashTbl                   A handle to a hash table
-+ @Param[in]     p_FmPcdCcNextEngineParams   A structure for defining new next engine
-+                                            parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_HashTableSet().
-+                When configuring nextEngine = e_FM_PCD_CC, note that
-+                p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different
-+                from the currently changed table.
-+*//***************************************************************************/
-+t_Error FM_PCD_HashTableModifyMissNextEngine(t_Handle                  h_HashTbl,
-+                                             t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams);
-+
-+/**************************************************************************//*
-+ @Function      FM_PCD_HashTableGetMissNextEngine
-+
-+ @Description   Gets NextEngine in case of key match miss.
-+
-+ @Param[in]     h_HashTbl                   A handle to a hash table
-+ @Param[out]    p_FmPcdCcNextEngineParams   Next engine parameters for the specified
-+                                            hash table.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_HashTableSet().
-+*//***************************************************************************/
-+t_Error FM_PCD_HashTableGetMissNextEngine(t_Handle                     h_HashTbl,
-+                                          t_FmPcdCcNextEngineParams    *p_FmPcdCcNextEngineParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_HashTableFindNGetKeyStatistics
-+
-+ @Description   This routine may be used to get statistics counters of specific key
-+                in a hash table.
-+
-+                If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
-+                'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
-+                these counters reflect how many frames passed that were matched
-+                this key; The total frames count will be returned in the counter
-+                of the first range (as only one frame length range was defined).
-+                If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for this node, the total
-+                frame count will be separated to frame length counters, based on
-+                provided frame length ranges.
-+                Note that this routine will identify the bucket of this key in
-+                the hash table and will search the bucket to locate the index
-+                of the required key based on received key parameters.
-+
-+ @Param[in]     h_HashTbl       A handle to a hash table
-+ @Param[in]     keySize         Size of the requested key
-+ @Param[in]     p_Key           A pointer to the requested key
-+ @Param[out]    p_KeyStatistics Key statistics counters
-+
-+ @Return        The specific key statistics.
-+
-+ @Cautions      Allowed only following FM_PCD_HashTableSet().
-+*//***************************************************************************/
-+t_Error FM_PCD_HashTableFindNGetKeyStatistics(t_Handle                 h_HashTbl,
-+                                              uint8_t                  keySize,
-+                                              uint8_t                  *p_Key,
-+                                              t_FmPcdCcKeyStatistics   *p_KeyStatistics);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_HashTableGetMissStatistics
-+
-+ @Description   This routine may be used to get statistics counters of 'miss'
-+                entry of the a hash table.
-+
-+                If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
-+                'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
-+                these counters reflect how many frames were not matched to any
-+                existing key and therefore passed through the miss entry;
-+
-+ @Param[in]     h_HashTbl           A handle to a hash table
-+ @Param[out]    p_MissStatistics    Statistics counters for 'miss'
-+
-+ @Return        The statistics for 'miss'.
-+
-+ @Cautions      Allowed only following FM_PCD_HashTableSet().
-+*//***************************************************************************/
-+t_Error FM_PCD_HashTableGetMissStatistics(t_Handle                 h_HashTbl,
-+                                          t_FmPcdCcKeyStatistics   *p_MissStatistics);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ManipNodeSet
-+
-+ @Description   This routine should be called for defining a manipulation
-+                node. A manipulation node must be defined before the CC node
-+                that precedes it.
-+
-+ @Param[in]     h_FmPcd             FM PCD module descriptor.
-+ @Param[in]     p_FmPcdManipParams  A structure of parameters defining the manipulation
-+
-+ @Return        A handle to the initialized object on success; NULL code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+t_Handle FM_PCD_ManipNodeSet(t_Handle h_FmPcd, t_FmPcdManipParams *p_FmPcdManipParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ManipNodeDelete
-+
-+ @Description   Delete an existing manipulation node.
-+
-+ @Param[in]     h_ManipNode     A handle to a manipulation node.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_ManipNodeSet().
-+*//***************************************************************************/
-+t_Error  FM_PCD_ManipNodeDelete(t_Handle h_ManipNode);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ManipGetStatistics
-+
-+ @Description   Retrieve the manipulation statistics.
-+
-+ @Param[in]     h_ManipNode         A handle to a manipulation node.
-+ @Param[out]    p_FmPcdManipStats   A structure for retrieving the manipulation statistics
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_ManipNodeSet().
-+*//***************************************************************************/
-+t_Error FM_PCD_ManipGetStatistics(t_Handle h_ManipNode, t_FmPcdManipStats *p_FmPcdManipStats);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ManipNodeReplace
-+
-+ @Description   Change existing manipulation node to be according to new requirement.
-+
-+ @Param[in]     h_ManipNode         A handle to a manipulation node.
-+ @Param[out]    p_ManipParams       A structure of parameters defining the change requirement
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_ManipNodeSet().
-+*//***************************************************************************/
-+t_Error FM_PCD_ManipNodeReplace(t_Handle h_ManipNode, t_FmPcdManipParams *p_ManipParams);
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Function      FM_PCD_FrmReplicSetGroup
-+
-+ @Description   Initialize a Frame Replicator group.
-+
-+ @Param[in]     h_FmPcd                FM PCD module descriptor.
-+ @Param[in]     p_FrmReplicGroupParam  A structure of parameters for the initialization of
-+                                       the frame replicator group.
-+
-+ @Return        A handle to the initialized object on success; NULL code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+t_Handle FM_PCD_FrmReplicSetGroup(t_Handle h_FmPcd, t_FmPcdFrmReplicGroupParams *p_FrmReplicGroupParam);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_FrmReplicDeleteGroup
-+
-+ @Description   Delete a Frame Replicator group.
-+
-+ @Param[in]     h_FrmReplicGroup  A handle to the frame replicator group.
-+
-+ @Return        E_OK on success;  Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_FrmReplicSetGroup().
-+*//***************************************************************************/
-+t_Error FM_PCD_FrmReplicDeleteGroup(t_Handle h_FrmReplicGroup);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_FrmReplicAddMember
-+
-+ @Description   Add the member in the index defined by the memberIndex.
-+
-+ @Param[in]     h_FrmReplicGroup   A handle to the frame replicator group.
-+ @Param[in]     memberIndex        member index for adding.
-+ @Param[in]     p_MemberParams     A pointer to the new member parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_FrmReplicSetGroup() of this group.
-+*//***************************************************************************/
-+t_Error FM_PCD_FrmReplicAddMember(t_Handle                   h_FrmReplicGroup,
-+                                  uint16_t                   memberIndex,
-+                                  t_FmPcdCcNextEngineParams *p_MemberParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_FrmReplicRemoveMember
-+
-+ @Description   Remove the member defined by the index from the relevant group.
-+
-+ @Param[in]     h_FrmReplicGroup   A handle to the frame replicator group.
-+ @Param[in]     memberIndex        member index for removing.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_FrmReplicSetGroup() of this group.
-+*//***************************************************************************/
-+t_Error FM_PCD_FrmReplicRemoveMember(t_Handle h_FrmReplicGroup,
-+                                     uint16_t memberIndex);
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+/**************************************************************************//**
-+ @Function      FM_PCD_StatisticsSetNode
-+
-+ @Description   This routine should be called for defining a statistics node.
-+
-+ @Param[in]     h_FmPcd             FM PCD module descriptor.
-+ @Param[in]     p_FmPcdstatsParams  A structure of parameters defining the statistics
-+
-+ @Return        A handle to the initialized object on success; NULL code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+t_Handle FM_PCD_StatisticsSetNode(t_Handle h_FmPcd, t_FmPcdStatsParams *p_FmPcdstatsParams);
-+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
-+
-+/** @} */ /* end of FM_PCD_Runtime_build_grp group */
-+/** @} */ /* end of FM_PCD_Runtime_grp group */
-+/** @} */ /* end of FM_PCD_grp group */
-+/** @} */ /* end of FM_grp group */
-+
-+
-+#ifdef NCSW_BACKWARD_COMPATIBLE_API
-+#define FM_PCD_MAX_NUM_OF_INTERCHANGABLE_HDRS   FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS
-+#define e_FM_PCD_MANIP_ONE_WAYS_HASH            e_FM_PCD_MANIP_ONE_WAY_HASH
-+#define e_FM_PCD_MANIP_TOW_WAYS_HASH            e_FM_PCD_MANIP_TWO_WAYS_HASH
-+
-+#define e_FM_PCD_MANIP_FRAGMENT_PACKECT         e_FM_PCD_MANIP_FRAGMENT_PACKET /* Feb13 */
-+
-+#define FM_PCD_SetNetEnvCharacteristics(_pcd, _params)  \
-+    FM_PCD_NetEnvCharacteristicsSet(_pcd, _params)
-+#define FM_PCD_KgSetScheme(_pcd, _params)       FM_PCD_KgSchemeSet(_pcd, _params)
-+#define FM_PCD_CcBuildTree(_pcd, _params)       FM_PCD_CcRootBuild(_pcd, _params)
-+#define FM_PCD_CcSetNode(_pcd, _params)         FM_PCD_MatchTableSet(_pcd, _params)
-+#define FM_PCD_PlcrSetProfile(_pcd, _params)    FM_PCD_PlcrProfileSet(_pcd, _params)
-+#define FM_PCD_ManipSetNode(_pcd, _params)      FM_PCD_ManipNodeSet(_pcd, _params)
-+
-+#define FM_PCD_DeleteNetEnvCharacteristics(_pcd, ...)   \
-+    FM_PCD_NetEnvCharacteristicsDelete(__VA_ARGS__)
-+#define FM_PCD_KgDeleteScheme(_pcd, ...)   \
-+    FM_PCD_KgSchemeDelete(__VA_ARGS__)
-+#define FM_PCD_KgGetSchemeCounter(_pcd, ...)   \
-+    FM_PCD_KgSchemeGetCounter(__VA_ARGS__)
-+#define FM_PCD_KgSetSchemeCounter(_pcd, ...)   \
-+    FM_PCD_KgSchemeSetCounter(__VA_ARGS__)
-+#define FM_PCD_PlcrDeleteProfile(_pcd, ...)   \
-+    FM_PCD_PlcrProfileDelete(__VA_ARGS__)
-+#define FM_PCD_PlcrGetProfileCounter(_pcd, ...)   \
-+    FM_PCD_PlcrProfileGetCounter(__VA_ARGS__)
-+#define FM_PCD_PlcrSetProfileCounter(_pcd, ...)   \
-+    FM_PCD_PlcrProfileSetCounter(__VA_ARGS__)
-+#define FM_PCD_CcDeleteTree(_pcd, ...)   \
-+    FM_PCD_CcRootDelete(__VA_ARGS__)
-+#define FM_PCD_CcTreeModifyNextEngine(_pcd, ...)   \
-+    FM_PCD_CcRootModifyNextEngine(__VA_ARGS__)
-+#define FM_PCD_CcDeleteNode(_pcd, ...)   \
-+    FM_PCD_MatchTableDelete(__VA_ARGS__)
-+#define FM_PCD_CcNodeModifyMissNextEngine(_pcd, ...)   \
-+    FM_PCD_MatchTableModifyMissNextEngine(__VA_ARGS__)
-+#define FM_PCD_CcNodeRemoveKey(_pcd, ...)   \
-+    FM_PCD_MatchTableRemoveKey(__VA_ARGS__)
-+#define FM_PCD_CcNodeAddKey(_pcd, ...)   \
-+    FM_PCD_MatchTableAddKey(__VA_ARGS__)
-+#define FM_PCD_CcNodeModifyNextEngine(_pcd, ...)   \
-+    FM_PCD_MatchTableModifyNextEngine(__VA_ARGS__)
-+#define FM_PCD_CcNodeModifyKeyAndNextEngine(_pcd, ...)   \
-+    FM_PCD_MatchTableModifyKeyAndNextEngine(__VA_ARGS__)
-+#define FM_PCD_CcNodeModifyKey(_pcd, ...)   \
-+    FM_PCD_MatchTableModifyKey(__VA_ARGS__)
-+#define FM_PCD_CcNodeFindNRemoveKey(_pcd, ...)   \
-+    FM_PCD_MatchTableFindNRemoveKey(__VA_ARGS__)
-+#define FM_PCD_CcNodeFindNModifyNextEngine(_pcd, ...)   \
-+    FM_PCD_MatchTableFindNModifyNextEngine(__VA_ARGS__)
-+#define FM_PCD_CcNodeFindNModifyKeyAndNextEngine(_pcd, ...) \
-+    FM_PCD_MatchTableFindNModifyKeyAndNextEngine(__VA_ARGS__)
-+#define FM_PCD_CcNodeFindNModifyKey(_pcd, ...)   \
-+    FM_PCD_MatchTableFindNModifyKey(__VA_ARGS__)
-+#define FM_PCD_CcIndexedHashNodeGetBucket(_pcd, ...)   \
-+    FM_PCD_MatchTableGetIndexedHashBucket(__VA_ARGS__)
-+#define FM_PCD_CcNodeGetNextEngine(_pcd, ...)   \
-+    FM_PCD_MatchTableGetNextEngine(__VA_ARGS__)
-+#define FM_PCD_CcNodeGetKeyCounter(_pcd, ...)   \
-+    FM_PCD_MatchTableGetKeyCounter(__VA_ARGS__)
-+#define FM_PCD_ManipDeleteNode(_pcd, ...)   \
-+    FM_PCD_ManipNodeDelete(__VA_ARGS__)
-+#endif /* NCSW_BACKWARD_COMPATIBLE_API */
-+
-+
-+#endif /* __FM_PCD_EXT */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_port_ext.h
-@@ -0,0 +1,2608 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc.
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          fm_port_ext.h
-+
-+ @Description   FM-Port Application Programming Interface.
-+*//***************************************************************************/
-+#ifndef __FM_PORT_EXT
-+#define __FM_PORT_EXT
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+#include "fm_pcd_ext.h"
-+#include "fm_ext.h"
-+#include "net_ext.h"
-+
-+
-+/**************************************************************************//**
-+
-+ @Group         FM_grp Frame Manager API
-+
-+ @Description   FM API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         FM_PORT_grp FM Port
-+
-+ @Description   FM Port API
-+
-+                The FM uses a general module called "port" to represent a Tx port
-+                (MAC), an Rx port (MAC) or Offline Parsing port.
-+                The number of ports in an FM varies between SOCs.
-+                The SW driver manages these ports as sub-modules of the FM, i.e.
-+                after an FM is initialized, its ports may be initialized and
-+                operated upon.
-+
-+                The port is initialized aware of its type, but other functions on
-+                a port may be indifferent to its type. When necessary, the driver
-+                verifies coherence and returns error if applicable.
-+
-+                On initialization, user specifies the port type and it's index
-+                (relative to the port's type) - always starting at 0.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   An enum for defining port PCD modes.
-+                This enum defines the superset of PCD engines support - i.e. not
-+                all engines have to be used, but all have to be enabled. The real
-+                flow of a specific frame depends on the PCD configuration and the
-+                frame headers and payload.
-+                Note: the first engine and the first engine after the parser (if
-+                exists) should be in order, the order is important as it will
-+                define the flow of the port. However, as for the rest engines
-+                (the ones that follows), the order is not important anymore as
-+                it is defined by the PCD graph itself.
-+*//***************************************************************************/
-+typedef enum e_FmPortPcdSupport {
-+      e_FM_PORT_PCD_SUPPORT_NONE = 0                /**< BMI to BMI, PCD is not used */
-+    , e_FM_PORT_PCD_SUPPORT_PRS_ONLY                /**< Use only Parser */
-+    , e_FM_PORT_PCD_SUPPORT_PLCR_ONLY               /**< Use only Policer */
-+    , e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR            /**< Use Parser and Policer */
-+    , e_FM_PORT_PCD_SUPPORT_PRS_AND_KG              /**< Use Parser and Keygen */
-+    , e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC       /**< Use Parser, Keygen and Coarse Classification */
-+    , e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR
-+                                                    /**< Use all PCD engines */
-+    , e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR     /**< Use Parser, Keygen and Policer */
-+    , e_FM_PORT_PCD_SUPPORT_PRS_AND_CC              /**< Use Parser and Coarse Classification */
-+    , e_FM_PORT_PCD_SUPPORT_PRS_AND_CC_AND_PLCR     /**< Use Parser and Coarse Classification and Policer */
-+    , e_FM_PORT_PCD_SUPPORT_CC_ONLY                 /**< Use only Coarse Classification */
-+#ifdef FM_CAPWAP_SUPPORT
-+    , e_FM_PORT_PCD_SUPPORT_CC_AND_KG               /**< Use Coarse Classification,and Keygen */
-+    , e_FM_PORT_PCD_SUPPORT_CC_AND_KG_AND_PLCR      /**< Use Coarse Classification, Keygen and Policer */
-+#endif /* FM_CAPWAP_SUPPORT */
-+} e_FmPortPcdSupport;
-+
-+/**************************************************************************//**
-+ @Description   Port interrupts
-+*//***************************************************************************/
-+typedef enum e_FmPortExceptions {
-+    e_FM_PORT_EXCEPTION_IM_BUSY                 /**< Independent-Mode Rx-BUSY */
-+} e_FmPortExceptions;
-+
-+
-+/**************************************************************************//**
-+ @Collection    General FM Port defines
-+*//***************************************************************************/
-+#define FM_PORT_PRS_RESULT_NUM_OF_WORDS     8   /**< Number of 4 bytes words in parser result */
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Collection   FM Frame error
-+*//***************************************************************************/
-+typedef uint32_t    fmPortFrameErrSelect_t;                         /**< typedef for defining Frame Descriptor errors */
-+
-+#define FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT      FM_FD_ERR_UNSUPPORTED_FORMAT    /**< Not for Rx-Port! Unsupported Format */
-+#define FM_PORT_FRM_ERR_LENGTH                  FM_FD_ERR_LENGTH                /**< Not for Rx-Port! Length Error */
-+#define FM_PORT_FRM_ERR_DMA                     FM_FD_ERR_DMA                   /**< DMA Data error */
-+#define FM_PORT_FRM_ERR_NON_FM                  FM_FD_RX_STATUS_ERR_NON_FM      /**< non Frame-Manager error; probably come from SEC that
-+                                                                                     was chained to FM */
-+
-+#define FM_PORT_FRM_ERR_IPRE                    (FM_FD_ERR_IPR & ~FM_FD_IPR)        /**< IPR error */
-+#define FM_PORT_FRM_ERR_IPR_NCSP                (FM_FD_ERR_IPR_NCSP & ~FM_FD_IPR)   /**< IPR non-consistent-sp */
-+
-+#define FM_PORT_FRM_ERR_IPFE                    0                                   /**< Obsolete; will be removed in the future */
-+
-+#ifdef FM_CAPWAP_SUPPORT
-+#define FM_PORT_FRM_ERR_CRE                     FM_FD_ERR_CRE
-+#define FM_PORT_FRM_ERR_CHE                     FM_FD_ERR_CHE
-+#endif /* FM_CAPWAP_SUPPORT */
-+
-+#define FM_PORT_FRM_ERR_PHYSICAL                FM_FD_ERR_PHYSICAL              /**< Rx FIFO overflow, FCS error, code error, running disparity
-+                                                                                     error (SGMII and TBI modes), FIFO parity error. PHY
-+                                                                                     Sequence error, PHY error control character detected. */
-+#define FM_PORT_FRM_ERR_SIZE                    FM_FD_ERR_SIZE                  /**< Frame too long OR Frame size exceeds max_length_frame  */
-+#define FM_PORT_FRM_ERR_CLS_DISCARD             FM_FD_ERR_CLS_DISCARD           /**< indicates a classifier "drop" operation */
-+#define FM_PORT_FRM_ERR_EXTRACTION              FM_FD_ERR_EXTRACTION            /**< Extract Out of Frame */
-+#define FM_PORT_FRM_ERR_NO_SCHEME               FM_FD_ERR_NO_SCHEME             /**< No Scheme Selected */
-+#define FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW        FM_FD_ERR_KEYSIZE_OVERFLOW      /**< Keysize Overflow */
-+#define FM_PORT_FRM_ERR_COLOR_RED               FM_FD_ERR_COLOR_RED             /**< Frame color is red */
-+#define FM_PORT_FRM_ERR_COLOR_YELLOW            FM_FD_ERR_COLOR_YELLOW          /**< Frame color is yellow */
-+#define FM_PORT_FRM_ERR_ILL_PLCR                FM_FD_ERR_ILL_PLCR              /**< Illegal Policer Profile selected */
-+#define FM_PORT_FRM_ERR_PLCR_FRAME_LEN          FM_FD_ERR_PLCR_FRAME_LEN        /**< Policer frame length error */
-+#define FM_PORT_FRM_ERR_PRS_TIMEOUT             FM_FD_ERR_PRS_TIMEOUT           /**< Parser Time out Exceed */
-+#define FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT        FM_FD_ERR_PRS_ILL_INSTRUCT      /**< Invalid Soft Parser instruction */
-+#define FM_PORT_FRM_ERR_PRS_HDR_ERR             FM_FD_ERR_PRS_HDR_ERR           /**< Header error was identified during parsing */
-+#define FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED    FM_FD_ERR_BLOCK_LIMIT_EXCEEDED  /**< Frame parsed beyind 256 first bytes */
-+#define FM_PORT_FRM_ERR_PROCESS_TIMEOUT         0x00000001                      /**< FPM Frame Processing Timeout Exceeded */
-+/* @} */
-+
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_PORT_init_grp FM Port Initialization Unit
-+
-+ @Description   FM Port Initialization Unit
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   Exceptions user callback routine, will be called upon an
-+                exception passing the exception identification.
-+
-+ @Param[in]     h_App      - User's application descriptor.
-+ @Param[in]     exception  - The exception.
-+  *//***************************************************************************/
-+typedef void (t_FmPortExceptionCallback) (t_Handle h_App, e_FmPortExceptions exception);
-+
-+/**************************************************************************//**
-+ @Description   User callback function called by driver with received data.
-+
-+                User provides this function. Driver invokes it.
-+
-+ @Param[in]     h_App           Application's handle originally specified to
-+                                the API Config function
-+ @Param[in]     p_Data          A pointer to data received
-+ @Param[in]     length          length of received data
-+ @Param[in]     status          receive status and errors
-+ @Param[in]     position        position of buffer in frame
-+ @Param[in]     h_BufContext    A handle of the user acossiated with this buffer
-+
-+ @Retval        e_RX_STORE_RESPONSE_CONTINUE - order the driver to continue Rx
-+                                               operation for all ready data.
-+ @Retval        e_RX_STORE_RESPONSE_PAUSE    - order the driver to stop Rx operation.
-+*//***************************************************************************/
-+typedef e_RxStoreResponse (t_FmPortImRxStoreCallback) (t_Handle h_App,
-+                                                       uint8_t  *p_Data,
-+                                                       uint16_t length,
-+                                                       uint16_t status,
-+                                                       uint8_t  position,
-+                                                       t_Handle h_BufContext);
-+
-+/**************************************************************************//**
-+ @Description   User callback function called by driver when transmit completed.
-+
-+                User provides this function. Driver invokes it.
-+
-+ @Param[in]     h_App           Application's handle originally specified to
-+                                the API Config function
-+ @Param[in]     p_Data          A pointer to data received
-+ @Param[in]     status          transmit status and errors
-+ @Param[in]     lastBuffer      is last buffer in frame
-+ @Param[in]     h_BufContext    A handle of the user acossiated with this buffer
-+ *//***************************************************************************/
-+typedef void (t_FmPortImTxConfCallback) (t_Handle   h_App,
-+                                         uint8_t    *p_Data,
-+                                         uint16_t   status,
-+                                         t_Handle   h_BufContext);
-+
-+/**************************************************************************//**
-+ @Description   A structure for additional Rx port parameters
-+*//***************************************************************************/
-+typedef struct t_FmPortRxParams {
-+    uint32_t                errFqid;            /**< Error Queue Id. */
-+    uint32_t                dfltFqid;           /**< Default Queue Id.  */
-+    uint16_t                liodnOffset;        /**< Port's LIODN offset. */
-+    t_FmExtPools            extBufPools;        /**< Which external buffer pools are used
-+                                                     (up to FM_PORT_MAX_NUM_OF_EXT_POOLS), and their sizes. */
-+} t_FmPortRxParams;
-+
-+/**************************************************************************//**
-+ @Description   A structure for additional non-Rx port parameters
-+*//***************************************************************************/
-+typedef struct t_FmPortNonRxParams {
-+    uint32_t                errFqid;            /**< Error Queue Id. */
-+    uint32_t                dfltFqid;           /**< For Tx - Default Confirmation queue,
-+                                                     0 means no Tx confirmation for processed
-+                                                     frames. For OP port - default Rx queue. */
-+    uint32_t                qmChannel;          /**< QM-channel dedicated to this port; will be used
-+                                                     by the FM for dequeue. */
-+} t_FmPortNonRxParams;
-+
-+/**************************************************************************//**
-+ @Description   A structure for additional Rx port parameters
-+*//***************************************************************************/
-+typedef struct t_FmPortImRxTxParams {
-+    t_Handle                    h_FmMuram;          /**< A handle of the FM-MURAM partition */
-+    uint16_t                    liodnOffset;        /**< For Rx ports only. Port's LIODN Offset. */
-+    uint8_t                     dataMemId;          /**< Memory partition ID for data buffers */
-+    uint32_t                    dataMemAttributes;  /**< Memory attributes for data buffers */
-+    t_BufferPoolInfo            rxPoolParams;       /**< For Rx ports only. */
-+    t_FmPortImRxStoreCallback   *f_RxStore;         /**< For Rx ports only. */
-+    t_FmPortImTxConfCallback    *f_TxConf;          /**< For Tx ports only. */
-+} t_FmPortImRxTxParams;
-+
-+/**************************************************************************//**
-+ @Description   A union for additional parameters depending on port type
-+*//***************************************************************************/
-+typedef union u_FmPortSpecificParams {
-+    t_FmPortImRxTxParams        imRxTxParams;       /**< Rx/Tx Independent-Mode port parameter structure */
-+    t_FmPortRxParams            rxParams;           /**< Rx port parameters structure */
-+    t_FmPortNonRxParams         nonRxParams;        /**< Non-Rx port parameters structure */
-+} u_FmPortSpecificParams;
-+
-+/**************************************************************************//**
-+ @Description   A structure representing FM initialization parameters
-+*//***************************************************************************/
-+typedef struct t_FmPortParams {
-+    uintptr_t                   baseAddr;           /**< Virtual Address of memory mapped FM Port registers.*/
-+    t_Handle                    h_Fm;               /**< A handle to the FM object this port related to */
-+    e_FmPortType                portType;           /**< Port type */
-+    uint8_t                     portId;             /**< Port Id - relative to type;
-+                                                         NOTE: When configuring Offline Parsing port for
-+                                                         FMANv3 devices (DPAA_VERSION 11 and higher),
-+                                                         it is highly recommended NOT to use portId=0 due to lack
-+                                                         of HW resources on portId=0. */
-+    bool                        independentModeEnable;
-+                                                    /**< This port is Independent-Mode - Used for Rx/Tx ports only! */
-+    uint16_t                    liodnBase;          /**< Irrelevant for P4080 rev 1. LIODN base for this port, to be
-+                                                         used together with LIODN offset. */
-+    u_FmPortSpecificParams      specificParams;     /**< Additional parameters depending on port
-+                                                         type. */
-+
-+    t_FmPortExceptionCallback   *f_Exception;       /**< Relevant for IM only Callback routine to be called on BUSY exception */
-+    t_Handle                    h_App;              /**< A handle to an application layer object; This handle will
-+                                                         be passed by the driver upon calling the above callbacks */
-+} t_FmPortParams;
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_Config
-+
-+ @Description   Creates a descriptor for the FM PORT module.
-+
-+                The routine returns a handle (descriptor) to the FM PORT object.
-+                This descriptor must be passed as first parameter to all other
-+                FM PORT function calls.
-+
-+                No actual initialization or configuration of FM hardware is
-+                done by this routine.
-+
-+ @Param[in]     p_FmPortParams   - Pointer to data structure of parameters
-+
-+ @Retval        Handle to FM object, or NULL for Failure.
-+*//***************************************************************************/
-+t_Handle FM_PORT_Config(t_FmPortParams *p_FmPortParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_Init
-+
-+ @Description   Initializes the FM PORT module by defining the software structure
-+                and configuring the hardware registers.
-+
-+ @Param[in]     h_FmPort - FM PORT module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_PORT_Init(t_Handle h_FmPort);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_Free
-+
-+ @Description   Frees all resources that were assigned to FM PORT module.
-+
-+                Calling this routine invalidates the descriptor.
-+
-+ @Param[in]     h_FmPort - FM PORT module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_PORT_Free(t_Handle h_FmPort);
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_PORT_advanced_init_grp    FM Port Advanced Configuration Unit
-+
-+ @Description   Configuration functions used to change default values.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   enum for defining QM frame dequeue
-+*//***************************************************************************/
-+typedef enum e_FmPortDeqType {
-+   e_FM_PORT_DEQ_TYPE1,             /**< Dequeue from the SP channel - with priority precedence,
-+                                         and Intra-Class Scheduling respected. */
-+   e_FM_PORT_DEQ_TYPE2,             /**< Dequeue from the SP channel - with active FQ precedence,
-+                                         and Intra-Class Scheduling respected. */
-+   e_FM_PORT_DEQ_TYPE3              /**< Dequeue from the SP channel - with active FQ precedence,
-+                                         and override Intra-Class Scheduling */
-+} e_FmPortDeqType;
-+
-+/**************************************************************************//**
-+ @Description   enum for defining QM frame dequeue
-+*//***************************************************************************/
-+typedef enum e_FmPortDeqPrefetchOption {
-+   e_FM_PORT_DEQ_NO_PREFETCH,       /**< QMI preforms a dequeue action for a single frame
-+                                         only when a dedicated portID Tnum is waiting. */
-+   e_FM_PORT_DEQ_PARTIAL_PREFETCH,  /**< QMI preforms a dequeue action for 3 frames when
-+                                         one dedicated portId tnum is waiting. */
-+   e_FM_PORT_DEQ_FULL_PREFETCH      /**< QMI preforms a dequeue action for 3 frames when
-+                                         no dedicated portId tnums are waiting. */
-+
-+} e_FmPortDeqPrefetchOption;
-+
-+/**************************************************************************//**
-+ @Description   enum for defining port default color
-+*//***************************************************************************/
-+typedef enum e_FmPortColor {
-+    e_FM_PORT_COLOR_GREEN,          /**< Default port color is green */
-+    e_FM_PORT_COLOR_YELLOW,         /**< Default port color is yellow */
-+    e_FM_PORT_COLOR_RED,            /**< Default port color is red */
-+    e_FM_PORT_COLOR_OVERRIDE        /**< Ignore color */
-+} e_FmPortColor;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining Dual Tx rate limiting scale
-+*//***************************************************************************/
-+typedef enum e_FmPortDualRateLimiterScaleDown {
-+    e_FM_PORT_DUAL_RATE_LIMITER_NONE = 0,           /**< Use only single rate limiter  */
-+    e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_2,    /**< Divide high rate limiter by 2 */
-+    e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_4,    /**< Divide high rate limiter by 4 */
-+    e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_8     /**< Divide high rate limiter by 8 */
-+} e_FmPortDualRateLimiterScaleDown;
-+
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining FM port resources
-+*//***************************************************************************/
-+typedef struct t_FmPortRsrc {
-+    uint32_t    num;                /**< Committed required resource */
-+    uint32_t    extra;              /**< Extra (not committed) required resource */
-+} t_FmPortRsrc;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining observed pool depletion
-+*//***************************************************************************/
-+typedef struct t_FmPortObservedBufPoolDepletion {
-+    t_FmBufPoolDepletion    poolDepletionParams;/**< parameters to define pool depletion */
-+    t_FmExtPools            poolsParams;        /**< Which external buffer pools are observed
-+                                                     (up to FM_PORT_MAX_NUM_OF_OBSERVED_EXT_POOLS),
-+                                                     and their sizes. */
-+} t_FmPortObservedBufPoolDepletion;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining Tx rate limiting
-+*//***************************************************************************/
-+typedef struct t_FmPortRateLimit {
-+    uint16_t                            maxBurstSize;           /**< in KBytes for Tx ports, in frames
-+                                                                     for OP ports. (note that
-+                                                                     for early chips burst size is
-+                                                                     rounded up to a multiply of 1000 frames).*/
-+    uint32_t                            rateLimit;              /**< in Kb/sec for Tx ports, in frame/sec for
-+                                                                     OP ports. Rate limit refers to
-+                                                                     data rate (rather than line rate). */
-+    e_FmPortDualRateLimiterScaleDown    rateLimitDivider;       /**< For OP ports only. Not-valid
-+                                                                     for some earlier chip revisions */
-+} t_FmPortRateLimit;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining the parameters of
-+                the Rx port performance counters
-+*//***************************************************************************/
-+typedef struct t_FmPortPerformanceCnt {
-+    uint8_t     taskCompVal;            /**< Task compare value */
-+    uint8_t     queueCompVal;           /**< Rx queue/Tx confirm queue compare
-+                                             value (unused for H/O) */
-+    uint8_t     dmaCompVal;             /**< Dma compare value */
-+    uint32_t    fifoCompVal;            /**< Fifo compare value (in bytes) */
-+} t_FmPortPerformanceCnt;
-+
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining the sizes of the Deep Sleep
-+                the Auto Response tables
-+*//***************************************************************************/
-+typedef struct t_FmPortDsarTablesSizes
-+{
-+    uint16_t   maxNumOfArpEntries;
-+    uint16_t   maxNumOfEchoIpv4Entries;
-+    uint16_t   maxNumOfNdpEntries;
-+    uint16_t   maxNumOfEchoIpv6Entries;
-+    uint16_t   maxNumOfSnmpIPV4Entries;
-+    uint16_t   maxNumOfSnmpIPV6Entries;
-+    uint16_t   maxNumOfSnmpOidEntries;
-+    uint16_t   maxNumOfSnmpOidChar; /* total amount of character needed for the snmp table */
-+
-+    uint16_t   maxNumOfIpProtFiltering;
-+    uint16_t   maxNumOfTcpPortFiltering;
-+    uint16_t   maxNumOfUdpPortFiltering;
-+} t_FmPortDsarTablesSizes;
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigDsarSupport
-+
-+ @Description   This function will allocate the amount of MURAM needed for
-+                this max number of entries for Deep Sleep Auto Response.
-+                it will calculate all needed MURAM for autoresponse including
-+                necesary common stuff.
-+
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[in]     params      A pointer to a structure containing the maximum
-+                            sizes of the auto response tables
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigDsarSupport(t_Handle h_FmPortRx, t_FmPortDsarTablesSizes *params);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigNumOfOpenDmas
-+
-+ @Description   Calling this routine changes the max number of open DMA's
-+                available for this port. It changes this parameter in the
-+                internal driver data base from its default configuration
-+                [OP: 1]
-+                [1G-RX, 1G-TX: 1 (+1)]
-+                [10G-RX, 10G-TX: 8 (+8)]
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[in]     p_OpenDmas  A pointer to a structure of parameters defining
-+                            the open DMA allocation.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigNumOfOpenDmas(t_Handle h_FmPort, t_FmPortRsrc *p_OpenDmas);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigNumOfTasks
-+
-+ @Description   Calling this routine changes the max number of tasks
-+                available for this port. It changes this parameter in the
-+                internal driver data base from its default configuration
-+                [OP: 1]
-+                [1G-RX, 1G-TX: 3 (+2)]
-+                [10G-RX, 10G-TX: 16 (+8)]
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     p_NumOfTasks    A pointer to a structure of parameters defining
-+                                the tasks allocation.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigNumOfTasks(t_Handle h_FmPort, t_FmPortRsrc *p_NumOfTasks);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigSizeOfFifo
-+
-+ @Description   Calling this routine changes the max FIFO size configured for this port.
-+
-+                This function changes the internal driver data base from its
-+                default configuration. Please refer to the driver's User Guide for
-+                information on default FIFO sizes in the various devices.
-+                [OP: 2KB]
-+                [1G-RX, 1G-TX: 11KB]
-+                [10G-RX, 10G-TX: 12KB]
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     p_SizeOfFifo    A pointer to a structure of parameters defining
-+                                the FIFO allocation.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigSizeOfFifo(t_Handle h_FmPort, t_FmPortRsrc *p_SizeOfFifo);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigDeqHighPriority
-+
-+ @Description   Calling this routine changes the dequeue priority in the
-+                internal driver data base from its default configuration
-+                1G: [DEFAULT_PORT_deqHighPriority_1G]
-+                10G: [DEFAULT_PORT_deqHighPriority_10G]
-+
-+                May be used for Non-Rx ports only
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[in]     highPri     TRUE to select high priority, FALSE for normal operation.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigDeqHighPriority(t_Handle h_FmPort, bool highPri);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigDeqType
-+
-+ @Description   Calling this routine changes the dequeue type parameter in the
-+                internal driver data base from its default configuration
-+                [DEFAULT_PORT_deqType].
-+
-+                May be used for Non-Rx ports only
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[in]     deqType     According to QM definition.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigDeqType(t_Handle h_FmPort, e_FmPortDeqType deqType);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigDeqPrefetchOption
-+
-+ @Description   Calling this routine changes the dequeue prefetch option parameter in the
-+                internal driver data base from its default configuration
-+                [DEFAULT_PORT_deqPrefetchOption]
-+                Note: Available for some chips only
-+
-+                May be used for Non-Rx ports only
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     deqPrefetchOption   New option
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigDeqPrefetchOption(t_Handle h_FmPort, e_FmPortDeqPrefetchOption deqPrefetchOption);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigDeqByteCnt
-+
-+ @Description   Calling this routine changes the dequeue byte count parameter in
-+                the internal driver data base from its default configuration
-+                1G:[DEFAULT_PORT_deqByteCnt_1G].
-+                10G:[DEFAULT_PORT_deqByteCnt_10G].
-+
-+                May be used for Non-Rx ports only
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     deqByteCnt      New byte count
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigDeqByteCnt(t_Handle h_FmPort, uint16_t deqByteCnt);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigBufferPrefixContent
-+
-+ @Description   Defines the structure, size and content of the application buffer.
-+                The prefix will
-+                In Tx ports, if 'passPrsResult', the application
-+                should set a value to their offsets in the prefix of
-+                the FM will save the first 'privDataSize', than,
-+                depending on 'passPrsResult' and 'passTimeStamp', copy parse result
-+                and timeStamp, and the packet itself (in this order), to the
-+                application buffer, and to offset.
-+                Calling this routine changes the buffer margins definitions
-+                in the internal driver data base from its default
-+                configuration: Data size:  [DEFAULT_PORT_bufferPrefixContent_privDataSize]
-+                               Pass Parser result: [DEFAULT_PORT_bufferPrefixContent_passPrsResult].
-+                               Pass timestamp: [DEFAULT_PORT_bufferPrefixContent_passTimeStamp].
-+
-+                May be used for all ports
-+
-+ @Param[in]     h_FmPort                        A handle to a FM Port module.
-+ @Param[in,out] p_FmBufferPrefixContent         A structure of parameters describing the
-+                                                structure of the buffer.
-+                                                Out parameter: Start margin - offset
-+                                                of data from start of external buffer.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigBufferPrefixContent(t_Handle                      h_FmPort,
-+                                          t_FmBufferPrefixContent       *p_FmBufferPrefixContent);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigCheksumLastBytesIgnore
-+
-+ @Description   Calling this routine changes the number of checksum bytes to ignore
-+                parameter in the internal driver data base from its default configuration
-+                [DEFAULT_PORT_cheksumLastBytesIgnore]
-+
-+                May be used by Tx & Rx ports only
-+
-+ @Param[in]     h_FmPort                A handle to a FM Port module.
-+ @Param[in]     cheksumLastBytesIgnore  New value
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigCheksumLastBytesIgnore(t_Handle h_FmPort, uint8_t cheksumLastBytesIgnore);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigCutBytesFromEnd
-+
-+ @Description   Calling this routine changes the number of bytes to cut from a
-+                frame's end parameter in the internal driver data base
-+                from its default configuration [DEFAULT_PORT_cutBytesFromEnd]
-+                Note that if the result of (frame length before chop - cutBytesFromEnd) is
-+                less than 14 bytes, the chop operation is not executed.
-+
-+                May be used for Rx ports only
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     cutBytesFromEnd     New value
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigCutBytesFromEnd(t_Handle h_FmPort, uint8_t cutBytesFromEnd);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigPoolDepletion
-+
-+ @Description   Calling this routine enables pause frame generation depending on the
-+                depletion status of BM pools. It also defines the conditions to activate
-+                this functionality. By default, this functionality is disabled.
-+
-+                May be used for Rx ports only
-+
-+ @Param[in]     h_FmPort                A handle to a FM Port module.
-+ @Param[in]     p_BufPoolDepletion      A structure of pool depletion parameters
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigPoolDepletion(t_Handle h_FmPort, t_FmBufPoolDepletion *p_BufPoolDepletion);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigObservedPoolDepletion
-+
-+ @Description   Calling this routine enables a mechanism to stop port enqueue
-+                depending on the depletion status of selected BM pools.
-+                It also defines the conditions to activate
-+                this functionality. By default, this functionality is disabled.
-+
-+                Note: Available for some chips only
-+
-+                May be used for OP ports only
-+
-+ @Param[in]     h_FmPort                            A handle to a FM Port module.
-+ @Param[in]     p_FmPortObservedBufPoolDepletion    A structure of parameters for pool depletion.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigObservedPoolDepletion(t_Handle                            h_FmPort,
-+                                            t_FmPortObservedBufPoolDepletion    *p_FmPortObservedBufPoolDepletion);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigExtBufPools
-+
-+ @Description   This routine should be called for OP ports
-+                that internally use BM buffer pools. In such cases, e.g. for fragmentation and
-+                re-assembly, the FM needs new BM buffers. By calling this routine the user
-+                specifies the BM buffer pools that should be used.
-+
-+                Note: Available for some chips only
-+
-+                May be used for OP ports only
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     p_FmExtPools        A structure of parameters for the external pools.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigExtBufPools(t_Handle h_FmPort, t_FmExtPools *p_FmExtPools);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigBackupPools
-+
-+ @Description   Calling this routine allows the configuration of some of the BM pools
-+                defined for this port as backup pools.
-+                A pool configured to be a backup pool will be used only if all other
-+                enabled non-backup pools are depleted.
-+
-+                May be used for Rx ports only
-+
-+ @Param[in]     h_FmPort                A handle to a FM Port module.
-+ @Param[in]     p_FmPortBackupBmPools   An array of pool id's. All pools specified here will
-+                                        be defined as backup pools.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigBackupPools(t_Handle h_FmPort, t_FmBackupBmPools *p_FmPortBackupBmPools);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigFrmDiscardOverride
-+
-+ @Description   Calling this routine changes the error frames destination parameter
-+                in the internal driver data base from its default configuration:
-+                override = [DEFAULT_PORT_frmDiscardOverride]
-+
-+                May be used for Rx and OP ports only
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[in]     override    TRUE to override discarding of error frames and
-+                            enqueueing them to error queue.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigFrmDiscardOverride(t_Handle h_FmPort, bool override);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigErrorsToDiscard
-+
-+ @Description   Calling this routine changes the behaviour on error parameter
-+                in the internal driver data base from its default configuration:
-+                [DEFAULT_PORT_errorsToDiscard].
-+                If a requested error was previously defined as "ErrorsToEnqueue" it's
-+                definition will change and the frame will be discarded.
-+                Errors that were not defined either as "ErrorsToEnqueue" nor as
-+                "ErrorsToDiscard", will be forwarded to CPU.
-+
-+                May be used for Rx and OP ports only
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[in]     errs        A list of errors to discard
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigErrorsToDiscard(t_Handle h_FmPort, fmPortFrameErrSelect_t errs);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigDmaSwapData
-+
-+ @Description   Calling this routine changes the DMA swap data aparameter
-+                in the internal driver data base from its default
-+                configuration  [DEFAULT_PORT_dmaSwapData]
-+
-+                May be used for all port types
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[in]     swapData    New selection
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigDmaSwapData(t_Handle h_FmPort, e_FmDmaSwapOption swapData);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigDmaIcCacheAttr
-+
-+ @Description   Calling this routine changes the internal context cache
-+                attribute parameter in the internal driver data base
-+                from its default configuration  [DEFAULT_PORT_dmaIntContextCacheAttr]
-+
-+                May be used for all port types
-+
-+ @Param[in]     h_FmPort               A handle to a FM Port module.
-+ @Param[in]     intContextCacheAttr    New selection
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigDmaIcCacheAttr(t_Handle h_FmPort, e_FmDmaCacheOption intContextCacheAttr);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigDmaHdrAttr
-+
-+ @Description   Calling this routine changes the header cache
-+                attribute parameter in the internal driver data base
-+                from its default configuration  [DEFAULT_PORT_dmaHeaderCacheAttr]
-+
-+                May be used for all port types
-+
-+ @Param[in]     h_FmPort                    A handle to a FM Port module.
-+ @Param[in]     headerCacheAttr             New selection
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigDmaHdrAttr(t_Handle h_FmPort, e_FmDmaCacheOption headerCacheAttr);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigDmaScatterGatherAttr
-+
-+ @Description   Calling this routine changes the scatter gather cache
-+                attribute parameter in the internal driver data base
-+                from its default configuration  [DEFAULT_PORT_dmaScatterGatherCacheAttr]
-+
-+                May be used for all port types
-+
-+ @Param[in]     h_FmPort                    A handle to a FM Port module.
-+ @Param[in]     scatterGatherCacheAttr      New selection
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigDmaScatterGatherAttr(t_Handle h_FmPort, e_FmDmaCacheOption scatterGatherCacheAttr);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigDmaWriteOptimize
-+
-+ @Description   Calling this routine changes the write optimization
-+                parameter in the internal driver data base
-+                from its default configuration:  By default optimize = [DEFAULT_PORT_dmaWriteOptimize].
-+                Note:
-+
-+                1. For head optimization, data alignment must be >= 16 (supported by default).
-+
-+                3. For tail optimization, note that the optimization is performed by extending the write transaction
-+                of the frame payload at the tail as needed to achieve optimal bus transfers, so that the last write
-+                is extended to be on 16/64 bytes aligned block (chip dependent).
-+
-+                Relevant for non-Tx port types
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[in]     optimize    TRUE to enable optimization, FALSE for normal operation
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigDmaWriteOptimize(t_Handle h_FmPort, bool optimize);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigNoScatherGather
-+
-+ @Description    Calling this routine changes the noScatherGather parameter in internal driver data base
-+                 from its default configuration.
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     noScatherGather (TRUE - frame is discarded if can not be stored in single buffer,
-+                                 FALSE - frame can be stored in scatter gather (S/G) format).
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigNoScatherGather(t_Handle h_FmPort, bool noScatherGather);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigDfltColor
-+
-+ @Description   Calling this routine changes the internal default color parameter
-+                in the internal driver data base
-+                from its default configuration  [DEFAULT_PORT_color]
-+
-+                May be used for all port types
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     color           New selection
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigDfltColor(t_Handle h_FmPort, e_FmPortColor color);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigSyncReq
-+
-+ @Description   Calling this routine changes the synchronization attribute parameter
-+                in the internal driver data base from its default configuration:
-+                syncReq = [DEFAULT_PORT_syncReq]
-+
-+                May be used for all port types
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     syncReq         TRUE to request synchronization, FALSE otherwize.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigSyncReq(t_Handle h_FmPort, bool syncReq);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigForwardReuseIntContext
-+
-+ @Description   This routine is relevant for Rx ports that are routed to OP port.
-+                It changes the internal context reuse option in the internal
-+                driver data base from its default configuration:
-+                reuse = [DEFAULT_PORT_forwardIntContextReuse]
-+
-+                May be used for Rx ports only
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     reuse           TRUE to reuse internal context on frames
-+                                forwarded to OP port.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigForwardReuseIntContext(t_Handle h_FmPort, bool reuse);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigDontReleaseTxBufToBM
-+
-+ @Description   This routine should be called if no Tx confirmation
-+                is done, and yet buffers should not be released to the BM.
-+                Normally, buffers are returned using the Tx confirmation
-+                process. When Tx confirmation is not used (defFqid=0),
-+                buffers are typically released to the BM. This routine
-+                may be called to avoid this behavior and not release the
-+                buffers.
-+
-+                May be used for Tx ports only
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigDontReleaseTxBufToBM(t_Handle h_FmPort);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigIMMaxRxBufLength
-+
-+ @Description   Changes the maximum receive buffer length from its default
-+                configuration: Closest rounded down power of 2 value of the
-+                data buffer size.
-+
-+                The maximum receive buffer length directly affects the structure
-+                of received frames (single- or multi-buffered) and the performance
-+                of both the FM and the driver.
-+
-+                The selection between single- or multi-buffered frames should be
-+                done according to the characteristics of the specific application.
-+                The recommended mode is to use a single data buffer per packet,
-+                as this mode provides the best performance. However, the user can
-+                select to use multiple data buffers per packet.
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     newVal          Maximum receive buffer length (in bytes).
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+                This routine is to be used only if Independent-Mode is enabled.
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigIMMaxRxBufLength(t_Handle h_FmPort, uint16_t newVal);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigIMRxBdRingLength
-+
-+ @Description   Changes the receive BD ring length from its default
-+                configuration:[DEFAULT_PORT_rxBdRingLength]
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     newVal          The desired BD ring length.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+                This routine is to be used only if Independent-Mode is enabled.
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigIMRxBdRingLength(t_Handle h_FmPort, uint16_t newVal);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigIMTxBdRingLength
-+
-+ @Description   Changes the transmit BD ring length from its default
-+                configuration:[DEFAULT_PORT_txBdRingLength]
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     newVal          The desired BD ring length.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+                This routine is to be used only if Independent-Mode is enabled.
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigIMTxBdRingLength(t_Handle h_FmPort, uint16_t newVal);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigIMFmanCtrlExternalStructsMemory
-+
-+ @Description   Configures memory partition and attributes for FMan-Controller
-+                data structures (e.g. BD rings).
-+                Calling this routine changes the internal driver data base
-+                from its default configuration
-+                [DEFAULT_PORT_ImfwExtStructsMemId, DEFAULT_PORT_ImfwExtStructsMemAttr].
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     memId           Memory partition ID.
-+ @Param[in]     memAttributes   Memory attributes mask (a combination of MEMORY_ATTR_x flags).
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error  FM_PORT_ConfigIMFmanCtrlExternalStructsMemory(t_Handle h_FmPort,
-+                                                       uint8_t  memId,
-+                                                       uint32_t memAttributes);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigIMPolling
-+
-+ @Description   Changes the Rx flow from interrupt driven (default) to polling.
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+                This routine is to be used only if Independent-Mode is enabled.
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigIMPolling(t_Handle h_FmPort);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigMaxFrameLength
-+
-+ @Description   Changes the definition of the max size of frame that should be
-+                transmitted/received on this port from its default value [DEFAULT_PORT_maxFrameLength].
-+                This parameter is used for confirmation of the minimum Fifo
-+                size calculations and only for Tx ports or ports working in
-+                independent mode. This should be larger than the maximum possible
-+                MTU that will be used for this port (i.e. its MAC).
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     length          Max size of frame
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+                This routine is to be used only if Independent-Mode is enabled.
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigMaxFrameLength(t_Handle h_FmPort, uint16_t length);
-+
-+/**************************************************************************//*
-+ @Function      FM_PORT_ConfigTxFifoMinFillLevel
-+
-+ @Description   Calling this routine changes the fifo minimum
-+                fill level parameter in the internal driver data base
-+                from its default configuration  [DEFAULT_PORT_txFifoMinFillLevel]
-+
-+                May be used for Tx ports only
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     minFillLevel    New value
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigTxFifoMinFillLevel(t_Handle h_FmPort, uint32_t minFillLevel);
-+
-+/**************************************************************************//*
-+ @Function      FM_PORT_ConfigFifoDeqPipelineDepth
-+
-+ @Description   Calling this routine changes the fifo dequeue
-+                pipeline depth parameter in the internal driver data base
-+
-+                from its default configuration: 1G ports: [DEFAULT_PORT_fifoDeqPipelineDepth_1G],
-+                10G port: [DEFAULT_PORT_fifoDeqPipelineDepth_10G],
-+                OP port: [DEFAULT_PORT_fifoDeqPipelineDepth_OH]
-+
-+                May be used for Tx/OP ports only
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     deqPipelineDepth    New value
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigFifoDeqPipelineDepth(t_Handle h_FmPort, uint8_t deqPipelineDepth);
-+
-+/**************************************************************************//*
-+ @Function      FM_PORT_ConfigTxFifoLowComfLevel
-+
-+ @Description   Calling this routine changes the fifo low comfort level
-+                parameter in internal driver data base
-+                from its default configuration [DEFAULT_PORT_txFifoLowComfLevel]
-+
-+                May be used for Tx ports only
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     fifoLowComfLevel    New value
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigTxFifoLowComfLevel(t_Handle h_FmPort, uint32_t fifoLowComfLevel);
-+
-+/**************************************************************************//*
-+ @Function      FM_PORT_ConfigRxFifoThreshold
-+
-+ @Description   Calling this routine changes the threshold of the FIFO
-+                fill level parameter in the internal driver data base
-+                from its default configuration [DEFAULT_PORT_rxFifoThreshold]
-+
-+                If the total number of buffers which are
-+                currently in use and associated with the
-+                specific RX port exceed this threshold, the
-+                BMI will signal the MAC to send a pause frame
-+                over the link.
-+
-+                May be used for Rx ports only
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     fifoThreshold       New value
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigRxFifoThreshold(t_Handle h_FmPort, uint32_t fifoThreshold);
-+
-+/**************************************************************************//*
-+ @Function      FM_PORT_ConfigRxFifoPriElevationLevel
-+
-+ @Description   Calling this routine changes the priority elevation level
-+                parameter in the internal driver data base from its default
-+                configuration  [DEFAULT_PORT_rxFifoPriElevationLevel]
-+
-+                If the total number of buffers which are currently in use and
-+                associated with the specific RX port exceed the amount specified
-+                in priElevationLevel, BMI will signal the main FM's DMA to
-+                elevate the FM priority on the system bus.
-+
-+                May be used for Rx ports only
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     priElevationLevel   New value
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigRxFifoPriElevationLevel(t_Handle h_FmPort, uint32_t priElevationLevel);
-+
-+#ifdef FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669
-+/**************************************************************************//*
-+ @Function      FM_PORT_ConfigBCBWorkaround
-+
-+ @Description   Configures BCB errata workaround.
-+
-+                When BCB errata is applicable, the workaround is always
-+                performed by FM Controller. Thus, this functions doesn't
-+                actually enable errata workaround but rather allows driver
-+                to perform adjustments required due to errata workaround
-+                execution in FM controller.
-+
-+                Applying BCB workaround also configures FM_PORT_FRM_ERR_PHYSICAL
-+                errors to be discarded. Thus FM_PORT_FRM_ERR_PHYSICAL can't be
-+                set by FM_PORT_SetErrorsRoute() function.
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigBCBWorkaround(t_Handle h_FmPort);
-+#endif /* FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669 */
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//*
-+ @Function      FM_PORT_ConfigInternalBuffOffset
-+
-+ @Description   Configures internal buffer offset.
-+
-+                May be used for Rx and OP ports only
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     val                 New value
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ConfigInternalBuffOffset(t_Handle h_FmPort, uint8_t val);
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/** @} */ /* end of FM_PORT_advanced_init_grp group */
-+/** @} */ /* end of FM_PORT_init_grp group */
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_PORT_runtime_control_grp FM Port Runtime Control Unit
-+
-+ @Description   FM Port Runtime control unit API functions, definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   enum for defining FM Port counters
-+*//***************************************************************************/
-+typedef enum e_FmPortCounters {
-+    e_FM_PORT_COUNTERS_CYCLE,                       /**< BMI performance counter */
-+    e_FM_PORT_COUNTERS_TASK_UTIL,                   /**< BMI performance counter */
-+    e_FM_PORT_COUNTERS_QUEUE_UTIL,                  /**< BMI performance counter */
-+    e_FM_PORT_COUNTERS_DMA_UTIL,                    /**< BMI performance counter */
-+    e_FM_PORT_COUNTERS_FIFO_UTIL,                   /**< BMI performance counter */
-+    e_FM_PORT_COUNTERS_RX_PAUSE_ACTIVATION,         /**< BMI Rx only performance counter */
-+    e_FM_PORT_COUNTERS_FRAME,                       /**< BMI statistics counter */
-+    e_FM_PORT_COUNTERS_DISCARD_FRAME,               /**< BMI statistics counter */
-+    e_FM_PORT_COUNTERS_DEALLOC_BUF,                 /**< BMI deallocate buffer statistics counter */
-+    e_FM_PORT_COUNTERS_RX_BAD_FRAME,                /**< BMI Rx only statistics counter */
-+    e_FM_PORT_COUNTERS_RX_LARGE_FRAME,              /**< BMI Rx only statistics counter */
-+    e_FM_PORT_COUNTERS_RX_FILTER_FRAME,             /**< BMI Rx & OP only statistics counter */
-+    e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR,             /**< BMI Rx, OP & HC only statistics counter */
-+    e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD,   /**< BMI Rx, OP & HC statistics counter */
-+    e_FM_PORT_COUNTERS_PREPARE_TO_ENQUEUE_COUNTER,  /**< BMI Rx, OP & HC only statistics counter */
-+    e_FM_PORT_COUNTERS_WRED_DISCARD,                /**< BMI OP & HC only statistics counter */
-+    e_FM_PORT_COUNTERS_LENGTH_ERR,                  /**< BMI non-Rx statistics counter */
-+    e_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT,           /**< BMI non-Rx statistics counter */
-+    e_FM_PORT_COUNTERS_DEQ_TOTAL,                   /**< QMI total QM dequeues counter */
-+    e_FM_PORT_COUNTERS_ENQ_TOTAL,                   /**< QMI total QM enqueues counter */
-+    e_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT,            /**< QMI counter */
-+    e_FM_PORT_COUNTERS_DEQ_CONFIRM                  /**< QMI counter */
-+} e_FmPortCounters;
-+
-+typedef struct t_FmPortBmiStats {
-+    uint32_t cntCycle;
-+    uint32_t cntTaskUtil;
-+    uint32_t cntQueueUtil;
-+    uint32_t cntDmaUtil;
-+    uint32_t cntFifoUtil;
-+    uint32_t cntRxPauseActivation;
-+    uint32_t cntFrame;
-+    uint32_t cntDiscardFrame;
-+    uint32_t cntDeallocBuf;
-+    uint32_t cntRxBadFrame;
-+    uint32_t cntRxLargeFrame;
-+    uint32_t cntRxFilterFrame;
-+    uint32_t cntRxListDmaErr;
-+    uint32_t cntRxOutOfBuffersDiscard;
-+    uint32_t cntWredDiscard;
-+    uint32_t cntLengthErr;
-+    uint32_t cntUnsupportedFormat;
-+} t_FmPortBmiStats;
-+
-+/**************************************************************************//**
-+ @Description   Structure for Port id parameters.
-+                Fields commented 'IN' are passed by the port module to be used
-+                by the FM module.
-+                Fields commented 'OUT' will be filled by FM before returning to port.
-+*//***************************************************************************/
-+typedef struct t_FmPortCongestionGrps {
-+    uint16_t    numOfCongestionGrpsToConsider;          /**< The number of required CGs
-+                                                             to define the size of the following array */
-+    uint8_t     congestionGrpsToConsider[FM_PORT_NUM_OF_CONGESTION_GRPS];
-+                                                        /**< An array of CG indexes;
-+                                                             Note that the size of the array should be
-+                                                             'numOfCongestionGrpsToConsider'. */
-+#if (DPAA_VERSION >= 11)
-+    bool        pfcPrioritiesEn[FM_PORT_NUM_OF_CONGESTION_GRPS][FM_MAX_NUM_OF_PFC_PRIORITIES];
-+                                                        /**< a matrix that represents the map between the CG ids
-+                                                             defined in 'congestionGrpsToConsider' to the priorties
-+                                                             mapping array. */
-+#endif /* (DPAA_VERSION >= 11) */
-+} t_FmPortCongestionGrps;
-+
-+/**************************************************************************//**
-+ @Description   Structure for Deep Sleep Auto Response ARP Entry
-+*//***************************************************************************/
-+typedef struct t_FmPortDsarArpEntry
-+{
-+    uint32_t  ipAddress;
-+    uint8_t   mac[6];
-+    bool      isVlan;
-+    uint16_t  vid;
-+} t_FmPortDsarArpEntry;
-+
-+/**************************************************************************//**
-+ @Description   Structure for Deep Sleep Auto Response ARP info
-+*//***************************************************************************/
-+typedef struct t_FmPortDsarArpInfo
-+{
-+    uint8_t           tableSize;
-+    t_FmPortDsarArpEntry *p_AutoResTable;
-+    bool              enableConflictDetection; /* when TRUE Conflict Detection will be checked and wake the host if needed */
-+} t_FmPortDsarArpInfo;
-+
-+/**************************************************************************//**
-+ @Description   Structure for Deep Sleep Auto Response NDP Entry
-+*//***************************************************************************/
-+typedef struct t_FmPortDsarNdpEntry
-+{
-+    uint32_t  ipAddress[4];
-+    uint8_t   mac[6];
-+    bool      isVlan;
-+    uint16_t  vid;
-+} t_FmPortDsarNdpEntry;
-+
-+/**************************************************************************//**
-+ @Description   Structure for Deep Sleep Auto Response NDP info
-+*//***************************************************************************/
-+typedef struct t_FmPortDsarNdpInfo
-+{
-+    uint32_t              multicastGroup;
-+
-+    uint8_t               tableSizeAssigned;
-+    t_FmPortDsarNdpEntry  *p_AutoResTableAssigned; /* This list refer to solicitation IP addresses.
-+                                                                 Note that all IP adresses must be from the same multicast group.
-+                                                                 This will be checked and if not operation will fail. */
-+    uint8_t               tableSizeTmp;
-+    t_FmPortDsarNdpEntry  *p_AutoResTableTmp;      /* This list refer to temp IP addresses.
-+                                                             Note that all temp IP adresses must be from the same multicast group.
-+                                                             This will be checked and if not operation will fail. */
-+
-+    bool                  enableConflictDetection; /* when TRUE Conflict Detection will be checked and wake the host if needed */
-+
-+} t_FmPortDsarNdpInfo;
-+
-+/**************************************************************************//**
-+ @Description   Structure for Deep Sleep Auto Response ICMPV4 info
-+*//***************************************************************************/
-+typedef struct t_FmPortDsarEchoIpv4Info
-+{
-+    uint8_t            tableSize;
-+    t_FmPortDsarArpEntry  *p_AutoResTable;
-+} t_FmPortDsarEchoIpv4Info;
-+
-+/**************************************************************************//**
-+ @Description   Structure for Deep Sleep Auto Response ICMPV6 info
-+*//***************************************************************************/
-+typedef struct t_FmPortDsarEchoIpv6Info
-+{
-+    uint8_t            tableSize;
-+    t_FmPortDsarNdpEntry  *p_AutoResTable;
-+} t_FmPortDsarEchoIpv6Info;
-+
-+/**************************************************************************//**
-+@Description    Deep Sleep Auto Response SNMP OIDs table entry
-+
-+*//***************************************************************************/
-+typedef struct {
-+	uint16_t     oidSize;
-+	uint8_t      *oidVal; /* only the oid string */
-+	uint16_t     resSize;
-+	uint8_t      *resVal; /* resVal will be the entire reply,
-+				i.e. "Type|Length|Value" */
-+} t_FmPortDsarOidsEntry;
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response SNMP IPv4 Addresses Table Entry
-+                Refer to the FMan Controller spec for more details.
-+*//***************************************************************************/
-+typedef struct
-+{
-+    uint32_t ipv4Addr; /*!< 32 bit IPv4 Address. */
-+    bool      isVlan;
-+    uint16_t vid;   /*!< 12 bits VLAN ID. The 4 left-most bits should be cleared                      */
-+                       /*!< This field should be 0x0000 for an entry with no VLAN tag or a null VLAN ID. */
-+} t_FmPortDsarSnmpIpv4AddrTblEntry;
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response SNMP IPv6 Addresses Table Entry
-+                Refer to the FMan Controller spec for more details.
-+*//***************************************************************************/
-+typedef struct
-+{
-+    uint32_t ipv6Addr[4];  /*!< 4 * 32 bit IPv6 Address.                                                     */
-+    bool      isVlan;
-+    uint16_t vid;       /*!< 12 bits VLAN ID. The 4 left-most bits should be cleared                      */
-+                           /*!< This field should be 0x0000 for an entry with no VLAN tag or a null VLAN ID. */
-+} t_FmPortDsarSnmpIpv6AddrTblEntry;
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response SNMP Descriptor
-+
-+*//***************************************************************************/
-+typedef struct
-+{
-+    uint16_t control;                          /**< Control bits [0-15]. */
-+    uint16_t maxSnmpMsgLength;                 /**< Maximal allowed SNMP message length. */
-+    uint16_t numOfIpv4Addresses;               /**< Number of entries in IPv4 addresses table. */
-+    uint16_t numOfIpv6Addresses;               /**< Number of entries in IPv6 addresses table. */
-+    t_FmPortDsarSnmpIpv4AddrTblEntry *p_Ipv4AddrTbl; /**< Pointer to IPv4 addresses table. */
-+    t_FmPortDsarSnmpIpv6AddrTblEntry *p_Ipv6AddrTbl; /**< Pointer to IPv6 addresses table. */
-+    uint8_t *p_RdOnlyCommunityStr;             /**< Pointer to the Read Only Community String. */
-+    uint8_t *p_RdWrCommunityStr;               /**< Pointer to the Read Write Community String. */
-+    t_FmPortDsarOidsEntry *p_OidsTbl;                 /**< Pointer to OIDs table. */
-+    uint32_t oidsTblSize;                      /**< Number of entries in OIDs table. */
-+} t_FmPortDsarSnmpInfo;
-+
-+/**************************************************************************//**
-+ @Description   Structure for Deep Sleep Auto Response filtering Entry
-+*//***************************************************************************/
-+typedef struct t_FmPortDsarFilteringEntry
-+{
-+    uint16_t    srcPort;
-+    uint16_t    dstPort;
-+    uint16_t    srcPortMask;
-+    uint16_t    dstPortMask;
-+} t_FmPortDsarFilteringEntry;
-+
-+/**************************************************************************//**
-+ @Description   Structure for Deep Sleep Auto Response filtering info
-+*//***************************************************************************/
-+typedef struct t_FmPortDsarFilteringInfo
-+{
-+    /* IP protocol filtering parameters */
-+    uint8_t     ipProtTableSize;
-+    uint8_t     *p_IpProtTablePtr;
-+    bool        ipProtPassOnHit;  /* when TRUE, miss in the table will cause the packet to be droped,
-+                                         hit will pass the packet to UDP/TCP filters if needed and if not
-+                                         to the classification tree. If the classification tree will pass
-+                                         the packet to a queue it will cause a wake interupt.
-+                                         When FALSE it the other way around. */
-+    /* UDP port filtering parameters */
-+    uint8_t     udpPortsTableSize;
-+    t_FmPortDsarFilteringEntry *p_UdpPortsTablePtr;
-+    bool        udpPortPassOnHit; /* when TRUE, miss in the table will cause the packet to be droped,
-+                                         hit will pass the packet to classification tree.
-+                                         If the classification tree will pass the packet to a queue it
-+                                         will cause a wake interupt.
-+                                         When FALSE it the other way around. */
-+    /* TCP port filtering parameters */
-+    uint16_t    tcpFlagsMask;
-+    uint8_t     tcpPortsTableSize;
-+    t_FmPortDsarFilteringEntry *p_TcpPortsTablePtr;
-+    bool        tcpPortPassOnHit; /* when TRUE, miss in the table will cause the packet to be droped,
-+                                         hit will pass the packet to classification tree.
-+                                         If the classification tree will pass the packet to a queue it
-+                                         will cause a wake interupt.
-+                                         When FALSE it the other way around. */
-+} t_FmPortDsarFilteringInfo;
-+
-+/**************************************************************************//**
-+ @Description   Structure for Deep Sleep Auto Response parameters
-+*//***************************************************************************/
-+typedef struct t_FmPortDsarParams
-+{
-+    t_Handle                  h_FmPortTx;
-+    t_FmPortDsarArpInfo       *p_AutoResArpInfo;
-+    t_FmPortDsarEchoIpv4Info  *p_AutoResEchoIpv4Info;
-+    t_FmPortDsarNdpInfo       *p_AutoResNdpInfo;
-+    t_FmPortDsarEchoIpv6Info  *p_AutoResEchoIpv6Info;
-+    t_FmPortDsarSnmpInfo      *p_AutoResSnmpInfo;
-+    t_FmPortDsarFilteringInfo *p_AutoResFilteringInfo;
-+} t_FmPortDsarParams;
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_EnterDsar
-+
-+ @Description   Enter Deep Sleep Auto Response mode.
-+                This function write the apropriate values to in the relevant
-+                tables in the MURAM.
-+
-+ @Param[in]     h_FmPortRx - FM PORT module descriptor
-+ @Param[in]     params - Auto Response parameters
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_EnterDsar(t_Handle h_FmPortRx, t_FmPortDsarParams *params);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_EnterDsarFinal
-+
-+ @Description   Enter Deep Sleep Auto Response mode.
-+                This function sets the Tx port in independent mode as needed
-+                and redirect the receive flow to go through the
-+                Dsar Fman-ctrl code
-+
-+ @Param[in]     h_DsarRxPort - FM Rx PORT module descriptor
-+ @Param[in]     h_DsarTxPort - FM Tx PORT module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_EnterDsarFinal(t_Handle h_DsarRxPort, t_Handle h_DsarTxPort);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ExitDsar
-+
-+ @Description   Exit Deep Sleep Auto Response mode.
-+                This function reverse the AR mode and put the ports back into
-+                their original wake mode
-+
-+ @Param[in]     h_FmPortRx - FM PORT Rx module descriptor
-+ @Param[in]     h_FmPortTx - FM PORT Tx module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_EnterDsar().
-+*//***************************************************************************/
-+void FM_PORT_ExitDsar(t_Handle h_FmPortRx, t_Handle h_FmPortTx);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_IsInDsar
-+
-+ @Description   This function returns TRUE if the port was set as Auto Response
-+                and FALSE if not. Once Exit AR mode it will return FALSE as well
-+                until re-enabled once more.
-+
-+ @Param[in]     h_FmPort - FM PORT module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+bool FM_PORT_IsInDsar(t_Handle h_FmPort);
-+
-+typedef struct t_FmPortDsarStats
-+{
-+    uint32_t arpArCnt;
-+    uint32_t echoIcmpv4ArCnt;
-+    uint32_t ndpArCnt;
-+    uint32_t echoIcmpv6ArCnt;
-+    uint32_t snmpGetCnt;
-+    uint32_t snmpGetNextCnt;
-+} t_FmPortDsarStats;
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_GetDsarStats
-+
-+ @Description   Return statistics for Deep Sleep Auto Response
-+
-+ @Param[in]     h_FmPortRx - FM PORT module descriptor
-+ @Param[out]    stats - structure containing the statistics counters
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_PORT_GetDsarStats(t_Handle h_FmPortRx, t_FmPortDsarStats *stats);
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+/**************************************************************************//**
-+ @Function      FM_PORT_DumpRegs
-+
-+ @Description   Dump all regs.
-+
-+                Calling this routine invalidates the descriptor.
-+
-+ @Param[in]     h_FmPort - FM PORT module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_DumpRegs(t_Handle h_FmPort);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_GetBufferDataOffset
-+
-+ @Description   Relevant for Rx ports.
-+                Returns the data offset from the beginning of the data buffer
-+
-+ @Param[in]     h_FmPort - FM PORT module descriptor
-+
-+ @Return        data offset.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+uint32_t FM_PORT_GetBufferDataOffset(t_Handle h_FmPort);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_GetBufferICInfo
-+
-+ @Description   Returns the Internal Context offset from the beginning of the data buffer
-+
-+ @Param[in]     h_FmPort - FM PORT module descriptor
-+ @Param[in]     p_Data   - A pointer to the data buffer.
-+
-+ @Return        Internal context info pointer on success, NULL if 'allOtherInfo' was not
-+                configured for this port.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+uint8_t * FM_PORT_GetBufferICInfo(t_Handle h_FmPort, char *p_Data);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_GetBufferPrsResult
-+
-+ @Description   Returns the pointer to the parse result in the data buffer.
-+                In Rx ports this is relevant after reception, if parse
-+                result is configured to be part of the data passed to the
-+                application. For non Rx ports it may be used to get the pointer
-+                of the area in the buffer where parse result should be
-+                initialized - if so configured.
-+                See FM_PORT_ConfigBufferPrefixContent for data buffer prefix
-+                configuration.
-+
-+ @Param[in]     h_FmPort    - FM PORT module descriptor
-+ @Param[in]     p_Data      - A pointer to the data buffer.
-+
-+ @Return        Parse result pointer on success, NULL if parse result was not
-+                configured for this port.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_FmPrsResult * FM_PORT_GetBufferPrsResult(t_Handle h_FmPort, char *p_Data);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_GetBufferTimeStamp
-+
-+ @Description   Returns the time stamp in the data buffer.
-+                Relevant for Rx ports for getting the buffer time stamp.
-+                See FM_PORT_ConfigBufferPrefixContent for data buffer prefix
-+                configuration.
-+
-+ @Param[in]     h_FmPort    - FM PORT module descriptor
-+ @Param[in]     p_Data      - A pointer to the data buffer.
-+
-+ @Return        A pointer to the hash result on success, NULL otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+uint64_t * FM_PORT_GetBufferTimeStamp(t_Handle h_FmPort, char *p_Data);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_GetBufferHashResult
-+
-+ @Description   Given a data buffer, on the condition that hash result was defined
-+                as a part of the buffer content (see FM_PORT_ConfigBufferPrefixContent)
-+                this routine will return the pointer to the hash result location in the
-+                buffer prefix.
-+
-+ @Param[in]     h_FmPort    - FM PORT module descriptor
-+ @Param[in]     p_Data      - A pointer to the data buffer.
-+
-+ @Return        A pointer to the hash result on success, NULL otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+uint8_t * FM_PORT_GetBufferHashResult(t_Handle h_FmPort, char *p_Data);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_Disable
-+
-+ @Description   Gracefully disable an FM port. The port will not start new tasks after all
-+                tasks associated with the port are terminated.
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+                This is a blocking routine, it returns after port is
-+                gracefully stopped, i.e. the port will not except new frames,
-+                but it will finish all frames or tasks which were already began
-+*//***************************************************************************/
-+t_Error FM_PORT_Disable(t_Handle h_FmPort);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_Enable
-+
-+ @Description   A runtime routine provided to allow disable/enable of port.
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_Enable(t_Handle h_FmPort);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_SetRateLimit
-+
-+ @Description   Calling this routine enables rate limit algorithm.
-+                By default, this functionality is disabled.
-+                Note that rate-limit mechanism uses the FM time stamp.
-+                The selected rate limit specified here would be
-+                rounded DOWN to the nearest 16M.
-+
-+                May be used for Tx and OP ports only
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     p_RateLimit     A structure of rate limit parameters
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+                If rate limit is set on a port that need to send PFC frames,
-+                it might violate the stop transmit timing.
-+*//***************************************************************************/
-+t_Error FM_PORT_SetRateLimit(t_Handle h_FmPort, t_FmPortRateLimit *p_RateLimit);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_DeleteRateLimit
-+
-+ @Description   Calling this routine disables and clears rate limit
-+                initialization.
-+
-+                May be used for Tx and OP ports only
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_DeleteRateLimit(t_Handle h_FmPort);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_SetPfcPrioritiesMappingToQmanWQ
-+
-+ @Description   Calling this routine maps each PFC received priority to the transmit WQ.
-+                This WQ will be blocked upon receiving a PFC frame with this priority.
-+
-+                May be used for Tx ports only.
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     prio            PFC priority (0-7).
-+ @Param[in]     wq              Work Queue (0-7).
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_SetPfcPrioritiesMappingToQmanWQ(t_Handle h_FmPort, uint8_t prio, uint8_t wq);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_SetStatisticsCounters
-+
-+ @Description   Calling this routine enables/disables port's statistics counters.
-+                By default, counters are enabled.
-+
-+                May be used for all port types
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[in]     enable      TRUE to enable, FALSE to disable.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_SetStatisticsCounters(t_Handle h_FmPort, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_SetFrameQueueCounters
-+
-+ @Description   Calling this routine enables/disables port's enqueue/dequeue counters.
-+                By default, counters are enabled.
-+
-+                May be used for all ports
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[in]     enable      TRUE to enable, FALSE to disable.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_SetFrameQueueCounters(t_Handle h_FmPort, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_AnalyzePerformanceParams
-+
-+ @Description   User may call this routine to so the driver will analyze if the
-+                basic performance parameters are correct and also the driver may
-+                suggest of improvements; The basic parameters are FIFO sizes, number
-+                of DMAs and number of TNUMs for the port.
-+
-+                May be used for all port types
-+
-+ @Param[in]     h_FmPort                A handle to a FM Port module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_AnalyzePerformanceParams(t_Handle h_FmPort);
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_SetAllocBufCounter
-+
-+ @Description   Calling this routine enables/disables BM pool allocate
-+                buffer counters.
-+                By default, counters are enabled.
-+
-+                May be used for Rx ports only
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[in]     poolId      BM pool id.
-+ @Param[in]     enable      TRUE to enable, FALSE to disable.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_SetAllocBufCounter(t_Handle h_FmPort, uint8_t poolId, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_GetBmiCounters
-+
-+ @Description   Read port's BMI stat counters and place them into
-+                a designated structure of counters.
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[out]    p_BmiStats  counters structure
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_GetBmiCounters(t_Handle h_FmPort, t_FmPortBmiStats *p_BmiStats);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_GetCounter
-+
-+ @Description   Reads one of the FM PORT counters.
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     fmPortCounter       The requested counter.
-+
-+ @Return        Counter's current value.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+                Note that it is user's responsibility to call this routine only
-+                for enabled counters, and there will be no indication if a
-+                disabled counter is accessed.
-+*//***************************************************************************/
-+uint32_t FM_PORT_GetCounter(t_Handle h_FmPort, e_FmPortCounters fmPortCounter);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ModifyCounter
-+
-+ @Description   Sets a value to an enabled counter. Use "0" to reset the counter.
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     fmPortCounter       The requested counter.
-+ @Param[in]     value               The requested value to be written into the counter.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ModifyCounter(t_Handle h_FmPort, e_FmPortCounters fmPortCounter, uint32_t value);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_GetAllocBufCounter
-+
-+ @Description   Reads one of the FM PORT buffer counters.
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     poolId              The requested pool.
-+
-+ @Return        Counter's current value.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+                Note that it is user's responsibility to call this routine only
-+                for enabled counters, and there will be no indication if a
-+                disabled counter is accessed.
-+*//***************************************************************************/
-+uint32_t FM_PORT_GetAllocBufCounter(t_Handle h_FmPort, uint8_t poolId);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ModifyAllocBufCounter
-+
-+ @Description   Sets a value to an enabled counter. Use "0" to reset the counter.
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     poolId              The requested pool.
-+ @Param[in]     value               The requested value to be written into the counter.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ModifyAllocBufCounter(t_Handle h_FmPort,  uint8_t poolId, uint32_t value);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_AddCongestionGrps
-+
-+ @Description   This routine effects the corresponding Tx port.
-+                It should be called in order to enable pause
-+                frame transmission in case of congestion in one or more
-+                of the congestion groups relevant to this port.
-+                Each call to this routine may add one or more congestion
-+                groups to be considered relevant to this port.
-+
-+                May be used for Rx, or RX+OP ports only (depending on chip)
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     p_CongestionGrps    A pointer to an array of congestion groups
-+                                    id's to consider.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_AddCongestionGrps(t_Handle h_FmPort, t_FmPortCongestionGrps *p_CongestionGrps);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_RemoveCongestionGrps
-+
-+ @Description   This routine effects the corresponding Tx port. It should be
-+                called when congestion groups were
-+                defined for this port and are no longer relevant, or pause
-+                frames transmitting is not required on their behalf.
-+                Each call to this routine may remove one or more congestion
-+                groups to be considered relevant to this port.
-+
-+                May be used for Rx, or RX+OP ports only (depending on chip)
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     p_CongestionGrps    A pointer to an array of congestion groups
-+                                    id's to consider.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_RemoveCongestionGrps(t_Handle h_FmPort, t_FmPortCongestionGrps *p_CongestionGrps);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_IsStalled
-+
-+ @Description   A routine for checking whether the specified port is stalled.
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+
-+ @Return        TRUE if port is stalled, FALSE otherwize
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+bool FM_PORT_IsStalled(t_Handle h_FmPort);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ReleaseStalled
-+
-+ @Description   This routine may be called in case the port was stalled and may
-+                now be released.
-+                Note that this routine is available only on older FMan revisions
-+                (FMan v2, DPAA v1.0 only).
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_ReleaseStalled(t_Handle h_FmPort);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_SetRxL4ChecksumVerify
-+
-+ @Description   This routine is relevant for Rx ports (1G and 10G). The routine
-+                set/clear the L3/L4 checksum verification (on RX side).
-+                Note that this takes affect only if hw-parser is enabled!
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     l4Checksum      boolean indicates whether to do L3/L4 checksum
-+                                on frames or not.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_SetRxL4ChecksumVerify(t_Handle h_FmPort, bool l4Checksum);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_SetErrorsRoute
-+
-+ @Description   Errors selected for this routine will cause a frame with that error
-+                to be enqueued to error queue.
-+                Errors not selected for this routine will cause a frame with that error
-+                to be enqueued to the one of the other port queues.
-+                By default all errors are defined to be enqueued to error queue.
-+                Errors that were configured to be discarded (at initialization)
-+                may not be selected here.
-+
-+                May be used for Rx and OP ports only
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[in]     errs        A list of errors to enqueue to error queue
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_SetErrorsRoute(t_Handle h_FmPort, fmPortFrameErrSelect_t errs);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_SetIMExceptions
-+
-+ @Description   Calling this routine enables/disables FM PORT interrupts.
-+
-+ @Param[in]     h_FmPort        FM PORT module descriptor.
-+ @Param[in]     exception       The exception to be selected.
-+ @Param[in]     enable          TRUE to enable interrupt, FALSE to mask it.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+                This routine should NOT be called from guest-partition
-+                (i.e. guestId != NCSW_MASTER_ID)
-+*//***************************************************************************/
-+t_Error FM_PORT_SetIMExceptions(t_Handle h_FmPort, e_FmPortExceptions exception, bool enable);
-+
-+/**************************************************************************//*
-+ @Function      FM_PORT_SetPerformanceCounters
-+
-+ @Description   Calling this routine enables/disables port's performance counters.
-+                By default, counters are enabled.
-+
-+                May be used for all port types
-+
-+ @Param[in]     h_FmPort                A handle to a FM Port module.
-+ @Param[in]     enable                  TRUE to enable, FALSE to disable.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_SetPerformanceCounters(t_Handle h_FmPort, bool enable);
-+
-+/**************************************************************************//*
-+ @Function      FM_PORT_SetPerformanceCountersParams
-+
-+ @Description   Calling this routine defines port's performance
-+                counters parameters.
-+
-+                May be used for all port types
-+
-+ @Param[in]     h_FmPort                A handle to a FM Port module.
-+ @Param[in]     p_FmPortPerformanceCnt  A pointer to a structure of performance
-+                                        counters parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_SetPerformanceCountersParams(t_Handle h_FmPort, t_FmPortPerformanceCnt *p_FmPortPerformanceCnt);
-+
-+/**************************************************************************//**
-+ @Group         FM_PORT_pcd_runtime_control_grp FM Port PCD Runtime Control Unit
-+
-+ @Description   FM Port PCD Runtime control unit API functions, definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   A structure defining the KG scheme after the parser.
-+                This is relevant only to change scheme selection mode - from
-+                direct to indirect and vice versa, or when the scheme is selected directly,
-+                to select the scheme id.
-+
-+*//***************************************************************************/
-+typedef struct t_FmPcdKgSchemeSelect {
-+    bool        direct;                 /**< TRUE to use 'h_Scheme' directly, FALSE to use LCV. */
-+    t_Handle    h_DirectScheme;         /**< Scheme handle, selects the scheme after parser;
-+                                             Relevant only when 'direct' is TRUE. */
-+} t_FmPcdKgSchemeSelect;
-+
-+/**************************************************************************//**
-+ @Description   A structure of scheme parameters
-+*//***************************************************************************/
-+typedef struct t_FmPcdPortSchemesParams {
-+    uint8_t     numOfSchemes;                           /**< Number of schemes for port to be bound to. */
-+    t_Handle    h_Schemes[FM_PCD_KG_NUM_OF_SCHEMES];    /**< Array of 'numOfSchemes' schemes for the
-+                                                             port to be bound to */
-+} t_FmPcdPortSchemesParams;
-+
-+/**************************************************************************//**
-+ @Description   Union for defining port protocol parameters for parser
-+*//***************************************************************************/
-+typedef union u_FmPcdHdrPrsOpts {
-+    /* MPLS */
-+    struct {
-+        bool            labelInterpretationEnable;  /**< When this bit is set, the last MPLS label will be
-+                                                         interpreted as described in HW spec table. When the bit
-+                                                         is cleared, the parser will advance to MPLS next parse */
-+        e_NetHeaderType nextParse;                  /**< must be equal or higher than IPv4 */
-+    } mplsPrsOptions;
-+    /* VLAN */
-+    struct {
-+        uint16_t        tagProtocolId1;             /**< User defined Tag Protocol Identifier, to be recognized
-+                                                         on VLAN TAG on top of 0x8100 and 0x88A8 */
-+        uint16_t        tagProtocolId2;             /**< User defined Tag Protocol Identifier, to be recognized
-+                                                         on VLAN TAG on top of 0x8100 and 0x88A8 */
-+    } vlanPrsOptions;
-+    /* PPP */
-+    struct{
-+        bool            enableMTUCheck;             /**< Check validity of MTU according to RFC2516 */
-+    } pppoePrsOptions;
-+
-+    /* IPV6 */
-+    struct{
-+        bool            routingHdrEnable;          /**< TRUE to enable routing header, otherwise ignore */
-+    } ipv6PrsOptions;
-+
-+    /* UDP */
-+    struct{
-+        bool            padIgnoreChecksum;          /**< TRUE to ignore pad in checksum */
-+    } udpPrsOptions;
-+
-+    /* TCP */
-+    struct {
-+        bool            padIgnoreChecksum;          /**< TRUE to ignore pad in checksum */
-+    } tcpPrsOptions;
-+} u_FmPcdHdrPrsOpts;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining each header for the parser
-+*//***************************************************************************/
-+typedef struct t_FmPcdPrsAdditionalHdrParams {
-+    e_NetHeaderType         hdr;            /**< Selected header; use  HEADER_TYPE_NONE
-+                                                 to indicate that sw parser is to run first
-+                                                 (before HW parser, and independent of the
-+                                                 existence of any protocol), in this case,
-+                                                 swPrsEnable must be set, and all other
-+                                                 parameters are irrelevant.  */
-+    bool                    errDisable;     /**< TRUE to disable error indication */
-+    bool                    swPrsEnable;    /**< Enable jump to SW parser when this
-+                                                 header is recognized by the HW parser. */
-+    uint8_t                 indexPerHdr;    /**< Normally 0, if more than one sw parser
-+                                                 attachments exists for the same header,
-+                                                 (in the main sw parser code) use this
-+                                                 index to distinguish between them. */
-+    bool                    usePrsOpts;     /**< TRUE to use parser options. */
-+    u_FmPcdHdrPrsOpts       prsOpts;        /**< A union according to header type,
-+                                                 defining the parser options selected.*/
-+} t_FmPcdPrsAdditionalHdrParams;
-+
-+/**************************************************************************//**
-+ @Description   struct for defining port PCD parameters
-+*//***************************************************************************/
-+typedef struct t_FmPortPcdPrsParams {
-+    uint8_t                         prsResultPrivateInfo;           /**< The private info provides a method of inserting
-+                                                                         port information into the parser result. This information
-+                                                                         may be extracted by Keygen and be used for frames
-+                                                                         distribution when a per-port distinction is required,
-+                                                                         it may also be used as a port logical id for analyzing
-+                                                                         incoming frames. */
-+    uint8_t                         parsingOffset;                  /**< Number of bytes from beginning of packet to start parsing */
-+    e_NetHeaderType                 firstPrsHdr;                    /**< The type of the first header expected at 'parsingOffset' */
-+    bool                            includeInPrsStatistics;         /**< TRUE to include this port in the parser statistics;
-+                                                                         NOTE: this field is not valid when the FM is in "guest" mode
-+                                                                               and IPC is not available. */
-+    uint8_t                         numOfHdrsWithAdditionalParams;  /**< Normally 0, some headers may get
-+                                                                         special parameters */
-+    t_FmPcdPrsAdditionalHdrParams   additionalParams[FM_PCD_PRS_NUM_OF_HDRS];
-+                                                                    /**< 'numOfHdrsWithAdditionalParams'  structures
-+                                                                         of additional parameters
-+                                                                         for each header that requires them */
-+    bool                            setVlanTpid1;                   /**< TRUE to configure user selection of Ethertype to
-+                                                                         indicate a VLAN tag (in addition to the TPID values
-+                                                                         0x8100 and 0x88A8). */
-+    uint16_t                        vlanTpid1;                      /**< extra tag to use if setVlanTpid1=TRUE. */
-+    bool                            setVlanTpid2;                   /**< TRUE to configure user selection of Ethertype to
-+                                                                         indicate a VLAN tag (in addition to the TPID values
-+                                                                         0x8100 and 0x88A8). */
-+    uint16_t                        vlanTpid2;                      /**< extra tag to use if setVlanTpid1=TRUE. */
-+} t_FmPortPcdPrsParams;
-+
-+/**************************************************************************//**
-+ @Description   struct for defining coarse alassification parameters
-+*//***************************************************************************/
-+typedef struct t_FmPortPcdCcParams {
-+    t_Handle            h_CcTree;                       /**< A handle to a CC tree */
-+} t_FmPortPcdCcParams;
-+
-+/**************************************************************************//**
-+ @Description   struct for defining keygen parameters
-+*//***************************************************************************/
-+typedef struct t_FmPortPcdKgParams {
-+    uint8_t             numOfSchemes;                   /**< Number of schemes for port to be bound to. */
-+    t_Handle            h_Schemes[FM_PCD_KG_NUM_OF_SCHEMES];
-+                                                        /**< Array of 'numOfSchemes' schemes handles for the
-+                                                             port to be bound to */
-+    bool                directScheme;                   /**< TRUE for going from parser to a specific scheme,
-+                                                             regardless of parser result */
-+    t_Handle            h_DirectScheme;                 /**< relevant only if direct == TRUE, Scheme handle,
-+                                                             as returned by FM_PCD_KgSetScheme */
-+} t_FmPortPcdKgParams;
-+
-+/**************************************************************************//**
-+ @Description   struct for defining policer parameters
-+*//***************************************************************************/
-+typedef struct t_FmPortPcdPlcrParams {
-+    t_Handle                h_Profile;          /**< Selected profile handle */
-+} t_FmPortPcdPlcrParams;
-+
-+/**************************************************************************//**
-+ @Description   struct for defining port PCD parameters
-+*//***************************************************************************/
-+typedef struct t_FmPortPcdParams {
-+    e_FmPortPcdSupport      pcdSupport;         /**< Relevant for Rx and offline ports only.
-+                                                     Describes the active PCD engines for this port. */
-+    t_Handle                h_NetEnv;           /**< HL Unused in PLCR only mode */
-+    t_FmPortPcdPrsParams    *p_PrsParams;       /**< Parser parameters for this port */
-+    t_FmPortPcdCcParams     *p_CcParams;        /**< Coarse classification parameters for this port */
-+    t_FmPortPcdKgParams     *p_KgParams;        /**< Keygen parameters for this port */
-+    t_FmPortPcdPlcrParams   *p_PlcrParams;      /**< Policer parameters for this port; Relevant for one of
-+                                                     following cases:
-+                                                     e_FM_PORT_PCD_SUPPORT_PLCR_ONLY or
-+                                                     e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR were selected,
-+                                                     or if any flow uses a KG scheme were policer
-+                                                     profile is not generated
-+                                                     ('bypassPlcrProfileGeneration selected'). */
-+    t_Handle                h_IpReassemblyManip;    /**< IP Reassembly manipulation */
-+#if (DPAA_VERSION >= 11)
-+    t_Handle                h_CapwapReassemblyManip;/**< CAPWAP Reassembly manipulation */
-+#endif /* (DPAA_VERSION >= 11) */
-+} t_FmPortPcdParams;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining the Parser starting point
-+*//***************************************************************************/
-+typedef struct t_FmPcdPrsStart {
-+    uint8_t             parsingOffset;  /**< Number of bytes from beginning of packet to
-+                                             start parsing */
-+    e_NetHeaderType     firstPrsHdr;    /**< The type of the first header axpected at
-+                                             'parsingOffset' */
-+} t_FmPcdPrsStart;
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Description   struct for defining external buffer margins
-+*//***************************************************************************/
-+typedef struct t_FmPortVSPAllocParams {
-+    uint8_t     numOfProfiles;          /**< Number of Virtual Storage Profiles; must be a power of 2 */
-+    uint8_t     dfltRelativeId;         /**< The default Virtual-Storage-Profile-id dedicated to Rx/OP port
-+                                             The same default Virtual-Storage-Profile-id will be for coupled Tx port
-+                                             if relevant function called for Rx port */
-+    t_Handle    h_FmTxPort;             /**< Handle to coupled Tx Port; not relevant for OP port. */
-+} t_FmPortVSPAllocParams;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_SetPCD
-+
-+ @Description   Calling this routine defines the port's PCD configuration.
-+                It changes it from its default configuration which is PCD
-+                disabled (BMI to BMI) and configures it according to the passed
-+                parameters.
-+
-+                May be used for Rx and OP ports only
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     p_FmPortPcd     A Structure of parameters defining the port's PCD
-+                                configuration.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_SetPCD(t_Handle h_FmPort, t_FmPortPcdParams *p_FmPortPcd);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_DeletePCD
-+
-+ @Description   Calling this routine releases the port's PCD configuration.
-+                The port returns to its default configuration which is PCD
-+                disabled (BMI to BMI) and all PCD configuration is removed.
-+
-+                May be used for Rx and OP ports which are
-+                in PCD mode  only
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_DeletePCD(t_Handle h_FmPort);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_AttachPCD
-+
-+ @Description   This routine may be called after FM_PORT_DetachPCD was called,
-+                to return to the originally configured PCD support flow.
-+                The couple of routines are used to allow PCD configuration changes
-+                that demand that PCD will not be used while changes take place.
-+
-+                May be used for Rx and OP ports which are
-+                in PCD mode only
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+t_Error FM_PORT_AttachPCD(t_Handle h_FmPort);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_DetachPCD
-+
-+ @Description   Calling this routine detaches the port from its PCD functionality.
-+                The port returns to its default flow which is BMI to BMI.
-+
-+                May be used for Rx and OP ports which are
-+                in PCD mode only
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_AttachPCD().
-+*//***************************************************************************/
-+t_Error FM_PORT_DetachPCD(t_Handle h_FmPort);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_PcdPlcrAllocProfiles
-+
-+ @Description   This routine may be called only for ports that use the Policer in
-+                order to allocate private policer profiles.
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     numOfProfiles       The number of required policer profiles
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init() and FM_PCD_Init(),
-+                and before FM_PORT_SetPCD().
-+*//***************************************************************************/
-+t_Error FM_PORT_PcdPlcrAllocProfiles(t_Handle h_FmPort, uint16_t numOfProfiles);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_PcdPlcrFreeProfiles
-+
-+ @Description   This routine should be called for freeing private policer profiles.
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init() and FM_PCD_Init(),
-+                and before FM_PORT_SetPCD().
-+*//***************************************************************************/
-+t_Error FM_PORT_PcdPlcrFreeProfiles(t_Handle h_FmPort);
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Function      FM_PORT_VSPAlloc
-+
-+ @Description   This routine allocated VSPs per port and forces the port to work
-+                in VSP mode. Note that the port is initialized by default with the
-+                physical-storage-profile only.
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[in]     p_Params    A structure of parameters for allocation VSP's per port
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init(), and before FM_PORT_SetPCD()
-+                and also before FM_PORT_Enable(); i.e. the port should be disabled.
-+*//***************************************************************************/
-+t_Error FM_PORT_VSPAlloc(t_Handle h_FmPort, t_FmPortVSPAllocParams *p_Params);
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_PcdKgModifyInitialScheme
-+
-+ @Description   This routine may be called only for ports that use the keygen in
-+                order to change the initial scheme frame should be routed to.
-+                The change may be of a scheme id (in case of direct mode),
-+                from direct to indirect, or from indirect to direct - specifying the scheme id.
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     p_FmPcdKgScheme     A structure of parameters for defining whether
-+                                    a scheme is direct/indirect, and if direct - scheme id.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init() and FM_PORT_SetPCD().
-+*//***************************************************************************/
-+t_Error FM_PORT_PcdKgModifyInitialScheme (t_Handle h_FmPort, t_FmPcdKgSchemeSelect *p_FmPcdKgScheme);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_PcdPlcrModifyInitialProfile
-+
-+ @Description   This routine may be called for ports with flows
-+                e_FM_PORT_PCD_SUPPORT_PLCR_ONLY or e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR
-+                only, to change the initial Policer profile frame should be
-+                routed to. The change may be of a profile and/or absolute/direct
-+                mode selection.
-+
-+ @Param[in]     h_FmPort                A handle to a FM Port module.
-+ @Param[in]     h_Profile               Policer profile handle
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init() and FM_PORT_SetPCD().
-+*//***************************************************************************/
-+t_Error FM_PORT_PcdPlcrModifyInitialProfile (t_Handle h_FmPort, t_Handle h_Profile);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_PcdCcModifyTree
-+
-+ @Description   This routine may be called for ports that use coarse classification tree
-+                if the user wishes to replace the tree. The routine may not be called while port
-+                receives packets using the PCD functionalities, therefor port must be first detached
-+                from the PCD, only than the routine may be called, and than port be attached to PCD again.
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[in]     h_CcTree            A CC tree that was already built. The tree id as returned from
-+                                    the BuildTree routine.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init(), FM_PORT_SetPCD() and FM_PORT_DetachPCD()
-+*//***************************************************************************/
-+t_Error FM_PORT_PcdCcModifyTree (t_Handle h_FmPort, t_Handle h_CcTree);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_PcdKgBindSchemes
-+
-+ @Description   These routines may be called for adding more schemes for the
-+                port to be bound to. The selected schemes are not added,
-+                just this specific port starts using them.
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     p_PortScheme    A structure defining the list of schemes to be added.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init() and FM_PORT_SetPCD().
-+*//***************************************************************************/
-+t_Error FM_PORT_PcdKgBindSchemes (t_Handle h_FmPort, t_FmPcdPortSchemesParams *p_PortScheme);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_PcdKgUnbindSchemes
-+
-+ @Description   These routines may be called for adding more schemes for the
-+                port to be bound to. The selected schemes are not removed or invalidated,
-+                just this specific port stops using them.
-+
-+ @Param[in]     h_FmPort        A handle to a FM Port module.
-+ @Param[in]     p_PortScheme    A structure defining the list of schemes to be added.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init() and FM_PORT_SetPCD().
-+*//***************************************************************************/
-+t_Error FM_PORT_PcdKgUnbindSchemes (t_Handle h_FmPort, t_FmPcdPortSchemesParams *p_PortScheme);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_GetIPv4OptionsCount
-+
-+ @Description   TODO
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+ @Param[out]    p_Ipv4OptionsCount  will hold the counter value
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init()
-+*//***************************************************************************/
-+t_Error FM_PORT_GetIPv4OptionsCount(t_Handle h_FmPort, uint32_t *p_Ipv4OptionsCount);
-+
-+/** @} */ /* end of FM_PORT_pcd_runtime_control_grp group */
-+/** @} */ /* end of FM_PORT_runtime_control_grp group */
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_PORT_runtime_data_grp FM Port Runtime Data-path Unit
-+
-+ @Description   FM Port Runtime data unit API functions, definitions and enums.
-+                This API is valid only if working in Independent-Mode.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ImTx
-+
-+ @Description   Tx function, called to transmit a data buffer on the port.
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[in]     p_Data      A pointer to an LCP data buffer.
-+ @Param[in]     length      Size of data for transmission.
-+ @Param[in]     lastBuffer  Buffer position - TRUE for the last buffer
-+                            of a frame, including a single buffer frame
-+ @Param[in]     h_BufContext  A handle of the user acossiated with this buffer
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+                NOTE - This routine can be used only when working in
-+                Independent-Mode mode.
-+*//***************************************************************************/
-+t_Error  FM_PORT_ImTx( t_Handle               h_FmPort,
-+                       uint8_t                *p_Data,
-+                       uint16_t               length,
-+                       bool                   lastBuffer,
-+                       t_Handle               h_BufContext);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ImTxConf
-+
-+ @Description   Tx port confirmation routine, optional, may be called to verify
-+                transmission of all frames. The procedure performed by this
-+                routine will be performed automatically on next buffer transmission,
-+                but if desired, calling this routine will invoke this action on
-+                demand.
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+                NOTE - This routine can be used only when working in
-+                Independent-Mode mode.
-+*//***************************************************************************/
-+void FM_PORT_ImTxConf(t_Handle h_FmPort);
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ImRx
-+
-+ @Description   Rx function, may be called to poll for received buffers.
-+                Normally, Rx process is invoked by the driver on Rx interrupt.
-+                Alternatively, this routine may be called on demand.
-+
-+ @Param[in]     h_FmPort            A handle to a FM Port module.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+                NOTE - This routine can be used only when working in
-+                Independent-Mode mode.
-+*//***************************************************************************/
-+t_Error  FM_PORT_ImRx(t_Handle h_FmPort);
-+
-+/** @} */ /* end of FM_PORT_runtime_data_grp group */
-+/** @} */ /* end of FM_PORT_grp group */
-+/** @} */ /* end of FM_grp group */
-+
-+
-+
-+#ifdef NCSW_BACKWARD_COMPATIBLE_API
-+#define FM_PORT_ConfigTxFifoDeqPipelineDepth FM_PORT_ConfigFifoDeqPipelineDepth
-+#endif /* NCSW_BACKWARD_COMPATIBLE_API */
-+
-+
-+#endif /* __FM_PORT_EXT */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_rtc_ext.h
-@@ -0,0 +1,619 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          fm_rtc_ext.h
-+
-+ @Description   External definitions and API for FM RTC IEEE1588 Timer Module.
-+
-+ @Cautions      None.
-+*//***************************************************************************/
-+
-+#ifndef __FM_RTC_EXT_H__
-+#define __FM_RTC_EXT_H__
-+
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+#include "fsl_fman_rtc.h"
-+
-+/**************************************************************************//**
-+
-+ @Group         FM_grp Frame Manager API
-+
-+ @Description   FM API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         fm_rtc_grp FM RTC
-+
-+ @Description   FM RTC functions, definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         fm_rtc_init_grp FM RTC Initialization Unit
-+
-+ @Description   FM RTC initialization API.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   FM RTC Alarm Polarity Options.
-+*//***************************************************************************/
-+typedef enum e_FmRtcAlarmPolarity
-+{
-+    e_FM_RTC_ALARM_POLARITY_ACTIVE_HIGH = E_FMAN_RTC_ALARM_POLARITY_ACTIVE_HIGH,    /**< Active-high output polarity */
-+    e_FM_RTC_ALARM_POLARITY_ACTIVE_LOW = E_FMAN_RTC_ALARM_POLARITY_ACTIVE_LOW     /**< Active-low output polarity */
-+} e_FmRtcAlarmPolarity;
-+
-+/**************************************************************************//**
-+ @Description   FM RTC Trigger Polarity Options.
-+*//***************************************************************************/
-+typedef enum e_FmRtcTriggerPolarity
-+{
-+    e_FM_RTC_TRIGGER_ON_RISING_EDGE = E_FMAN_RTC_TRIGGER_ON_RISING_EDGE,    /**< Trigger on rising edge */
-+    e_FM_RTC_TRIGGER_ON_FALLING_EDGE = E_FMAN_RTC_TRIGGER_ON_FALLING_EDGE   /**< Trigger on falling edge */
-+} e_FmRtcTriggerPolarity;
-+
-+/**************************************************************************//**
-+ @Description   IEEE1588 Timer Module FM RTC Optional Clock Sources.
-+*//***************************************************************************/
-+typedef enum e_FmSrcClock
-+{
-+    e_FM_RTC_SOURCE_CLOCK_EXTERNAL = E_FMAN_RTC_SOURCE_CLOCK_EXTERNAL,  /**< external high precision timer reference clock */
-+    e_FM_RTC_SOURCE_CLOCK_SYSTEM = E_FMAN_RTC_SOURCE_CLOCK_SYSTEM,    /**< MAC system clock */
-+    e_FM_RTC_SOURCE_CLOCK_OSCILATOR = E_FMAN_RTC_SOURCE_CLOCK_OSCILATOR  /**< RTC clock oscilator */
-+}e_FmSrcClk;
-+
-+/**************************************************************************//**
-+ @Description   FM RTC configuration parameters structure.
-+
-+                This structure should be passed to FM_RTC_Config().
-+*//***************************************************************************/
-+typedef struct t_FmRtcParams
-+{
-+    t_Handle                 h_Fm;               /**< FM Handle*/
-+    uintptr_t                baseAddress;        /**< Base address of FM RTC registers */
-+    t_Handle                 h_App;              /**< A handle to an application layer object; This handle will
-+                                                      be passed by the driver upon calling the above callbacks */
-+} t_FmRtcParams;
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_Config
-+
-+ @Description   Configures the FM RTC module according to user's parameters.
-+
-+                The driver assigns default values to some FM RTC parameters.
-+                These parameters can be overwritten using the advanced
-+                configuration routines.
-+
-+ @Param[in]     p_FmRtcParam    - FM RTC configuration parameters.
-+
-+ @Return        Handle to the new FM RTC object; NULL pointer on failure.
-+
-+ @Cautions      None
-+*//***************************************************************************/
-+t_Handle FM_RTC_Config(t_FmRtcParams *p_FmRtcParam);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_Init
-+
-+ @Description   Initializes the FM RTC driver and hardware.
-+
-+ @Param[in]     h_FmRtc - Handle to FM RTC object.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously created using FM_RTC_Config().
-+*//***************************************************************************/
-+t_Error FM_RTC_Init(t_Handle h_FmRtc);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_Free
-+
-+ @Description   Frees the FM RTC object and all allocated resources.
-+
-+ @Param[in]     h_FmRtc - Handle to FM RTC object.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously created using FM_RTC_Config().
-+*//***************************************************************************/
-+t_Error FM_RTC_Free(t_Handle h_FmRtc);
-+
-+
-+/**************************************************************************//**
-+ @Group         fm_rtc_adv_config_grp  FM RTC Advanced Configuration Unit
-+
-+ @Description   FM RTC advanced configuration functions.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_ConfigPeriod
-+
-+ @Description   Configures the period of the timestamp if different than
-+                default [DEFAULT_clockPeriod].
-+
-+ @Param[in]     h_FmRtc         - Handle to FM RTC object.
-+ @Param[in]     period          - Period in nano-seconds.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously created using FM_RTC_Config().
-+*//***************************************************************************/
-+t_Error FM_RTC_ConfigPeriod(t_Handle h_FmRtc, uint32_t period);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_ConfigSourceClock
-+
-+ @Description   Configures the source clock of the RTC.
-+
-+ @Param[in]     h_FmRtc         - Handle to FM RTC object.
-+ @Param[in]     srcClk          - Source clock selection.
-+ @Param[in]     freqInMhz       - the source-clock frequency (in MHz).
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously created using FM_RTC_Config().
-+*//***************************************************************************/
-+t_Error FM_RTC_ConfigSourceClock(t_Handle      h_FmRtc,
-+                                 e_FmSrcClk    srcClk,
-+                                 uint32_t      freqInMhz);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_ConfigPulseRealignment
-+
-+ @Description   Configures the RTC to automatic FIPER pulse realignment in
-+                response to timer adjustments [DEFAULT_pulseRealign]
-+
-+                In this mode, the RTC clock is identical to the source clock.
-+                This feature can be useful when the system contains an external
-+                RTC with inherent frequency compensation.
-+
-+ @Param[in]     h_FmRtc     - Handle to FM RTC object.
-+ @Param[in]     enable      - TRUE to enable automatic realignment.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously created using FM_RTC_Config().
-+*//***************************************************************************/
-+t_Error FM_RTC_ConfigPulseRealignment(t_Handle h_FmRtc, bool enable);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_ConfigFrequencyBypass
-+
-+ @Description   Configures the RTC to bypass the frequency compensation
-+                mechanism. [DEFAULT_bypass]
-+
-+                In this mode, the RTC clock is identical to the source clock.
-+                This feature can be useful when the system contains an external
-+                RTC with inherent frequency compensation.
-+
-+ @Param[in]     h_FmRtc     - Handle to FM RTC object.
-+ @Param[in]     enabled     - TRUE to bypass frequency compensation;
-+                              FALSE otherwise.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously created using FM_RTC_Config().
-+*//***************************************************************************/
-+t_Error FM_RTC_ConfigFrequencyBypass(t_Handle h_FmRtc, bool enabled);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_ConfigInvertedInputClockPhase
-+
-+ @Description   Configures the RTC to invert the source clock phase on input.
-+                [DEFAULT_invertInputClkPhase]
-+
-+ @Param[in]     h_FmRtc  - Handle to FM RTC object.
-+ @Param[in]     inverted    - TRUE to invert the source clock phase on input.
-+                              FALSE otherwise.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously created using FM_RTC_Config().
-+*//***************************************************************************/
-+t_Error FM_RTC_ConfigInvertedInputClockPhase(t_Handle h_FmRtc, bool inverted);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_ConfigInvertedOutputClockPhase
-+
-+ @Description   Configures the RTC to invert the output clock phase.
-+                [DEFAULT_invertOutputClkPhase]
-+
-+ @Param[in]     h_FmRtc  - Handle to FM RTC object.
-+ @Param[in]     inverted    - TRUE to invert the output clock phase.
-+                              FALSE otherwise.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously created using FM_RTC_Config().
-+*//***************************************************************************/
-+t_Error FM_RTC_ConfigInvertedOutputClockPhase(t_Handle h_FmRtc, bool inverted);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_ConfigOutputClockDivisor
-+
-+ @Description   Configures the divisor for generating the output clock from
-+                the RTC clock. [DEFAULT_outputClockDivisor]
-+
-+ @Param[in]     h_FmRtc  - Handle to FM RTC object.
-+ @Param[in]     divisor     - Divisor for generation of the output clock.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously created using FM_RTC_Config().
-+*//***************************************************************************/
-+t_Error FM_RTC_ConfigOutputClockDivisor(t_Handle h_FmRtc, uint16_t divisor);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_ConfigAlarmPolarity
-+
-+ @Description   Configures the polarity (active-high/active-low) of a specific
-+                alarm signal. [DEFAULT_alarmPolarity]
-+
-+ @Param[in]     h_FmRtc      - Handle to FM RTC object.
-+ @Param[in]     alarmId         - Alarm ID.
-+ @Param[in]     alarmPolarity   - Alarm polarity.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously created using FM_RTC_Config().
-+*//***************************************************************************/
-+t_Error FM_RTC_ConfigAlarmPolarity(t_Handle             h_FmRtc,
-+                                   uint8_t              alarmId,
-+                                   e_FmRtcAlarmPolarity alarmPolarity);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_ConfigExternalTriggerPolarity
-+
-+ @Description   Configures the polarity (rising/falling edge) of a specific
-+                external trigger signal. [DEFAULT_triggerPolarity]
-+
-+ @Param[in]     h_FmRtc      - Handle to FM RTC object.
-+ @Param[in]     triggerId       - Trigger ID.
-+ @Param[in]     triggerPolarity - Trigger polarity.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously created using FM_RTC_Config().
-+*//***************************************************************************/
-+t_Error FM_RTC_ConfigExternalTriggerPolarity(t_Handle               h_FmRtc,
-+                                             uint8_t                triggerId,
-+                                             e_FmRtcTriggerPolarity triggerPolarity);
-+
-+/** @} */ /* end of fm_rtc_adv_config_grp */
-+/** @} */ /* end of fm_rtc_init_grp */
-+
-+
-+/**************************************************************************//**
-+ @Group         fm_rtc_control_grp FM RTC Control Unit
-+
-+ @Description   FM RTC runtime control API.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      t_FmRtcExceptionsCallback
-+
-+ @Description   Exceptions user callback routine, used for RTC different mechanisms.
-+
-+ @Param[in]     h_App       - User's application descriptor.
-+ @Param[in]     id          - source id.
-+*//***************************************************************************/
-+typedef void (t_FmRtcExceptionsCallback) ( t_Handle  h_App, uint8_t id);
-+
-+/**************************************************************************//**
-+ @Description   FM RTC alarm parameters.
-+*//***************************************************************************/
-+typedef struct t_FmRtcAlarmParams {
-+    uint8_t                     alarmId;            /**< 0 or 1 */
-+    uint64_t                    alarmTime;          /**< In nanoseconds, the time when the alarm
-+                                                         should go off - must be a multiple of
-+                                                         the RTC period */
-+    t_FmRtcExceptionsCallback   *f_AlarmCallback;   /**< This routine will be called when RTC
-+                                                         reaches alarmTime */
-+    bool                        clearOnExpiration;  /**< TRUE to turn off the alarm once expired. */
-+} t_FmRtcAlarmParams;
-+
-+/**************************************************************************//**
-+ @Description   FM RTC Periodic Pulse parameters.
-+*//***************************************************************************/
-+typedef struct t_FmRtcPeriodicPulseParams {
-+    uint8_t                     periodicPulseId;            /**< 0 or 1 */
-+    uint64_t                    periodicPulsePeriod;        /**< In Nanoseconds. Must be
-+                                                                 a multiple of the RTC period */
-+    t_FmRtcExceptionsCallback   *f_PeriodicPulseCallback;   /**< This routine will be called every
-+                                                                 periodicPulsePeriod. */
-+} t_FmRtcPeriodicPulseParams;
-+
-+/**************************************************************************//**
-+ @Description   FM RTC Periodic Pulse parameters.
-+*//***************************************************************************/
-+typedef struct t_FmRtcExternalTriggerParams {
-+    uint8_t                     externalTriggerId;              /**< 0 or 1 */
-+    bool                        usePulseAsInput;                /**< Use the pulse interrupt instead of
-+                                                                     an external signal */
-+    t_FmRtcExceptionsCallback   *f_ExternalTriggerCallback;     /**< This routine will be called every
-+                                                                     periodicPulsePeriod. */
-+} t_FmRtcExternalTriggerParams;
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_Enable
-+
-+ @Description   Enable the RTC (time count is started).
-+
-+                The user can select to resume the time count from previous
-+                point, or to restart the time count.
-+
-+ @Param[in]     h_FmRtc     - Handle to FM RTC object.
-+ @Param[in]     resetClock  - Restart the time count from zero.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously initialized using FM_RTC_Init().
-+*//***************************************************************************/
-+t_Error FM_RTC_Enable(t_Handle h_FmRtc, bool resetClock);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_Disable
-+
-+ @Description   Disables the RTC (time count is stopped).
-+
-+ @Param[in]     h_FmRtc - Handle to FM RTC object.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously initialized using FM_RTC_Init().
-+*//***************************************************************************/
-+t_Error FM_RTC_Disable(t_Handle h_FmRtc);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_SetClockOffset
-+
-+ @Description   Sets the clock offset (usually relative to another clock).
-+
-+                The user can pass a negative offset value.
-+
-+ @Param[in]     h_FmRtc  - Handle to FM RTC object.
-+ @Param[in]     offset   - New clock offset (in nanoseconds).
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously initialized using FM_RTC_Init().
-+*//***************************************************************************/
-+t_Error FM_RTC_SetClockOffset(t_Handle h_FmRtc, int64_t offset);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_SetAlarm
-+
-+ @Description   Schedules an alarm event to a given RTC time.
-+
-+ @Param[in]     h_FmRtc             - Handle to FM RTC object.
-+ @Param[in]     p_FmRtcAlarmParams  - Alarm parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously initialized using FM_RTC_Init().
-+                Must be called only prior to FM_RTC_Enable().
-+*//***************************************************************************/
-+t_Error FM_RTC_SetAlarm(t_Handle h_FmRtc, t_FmRtcAlarmParams *p_FmRtcAlarmParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_SetPeriodicPulse
-+
-+ @Description   Sets a periodic pulse.
-+
-+ @Param[in]     h_FmRtc                         - Handle to FM RTC object.
-+ @Param[in]     p_FmRtcPeriodicPulseParams      - Periodic pulse parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously initialized using FM_RTC_Init().
-+                Must be called only prior to FM_RTC_Enable().
-+*//***************************************************************************/
-+t_Error FM_RTC_SetPeriodicPulse(t_Handle h_FmRtc, t_FmRtcPeriodicPulseParams *p_FmRtcPeriodicPulseParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_ClearPeriodicPulse
-+
-+ @Description   Clears a periodic pulse.
-+
-+ @Param[in]     h_FmRtc                         - Handle to FM RTC object.
-+ @Param[in]     periodicPulseId                 - Periodic pulse id.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously initialized using FM_RTC_Init().
-+*//***************************************************************************/
-+t_Error FM_RTC_ClearPeriodicPulse(t_Handle h_FmRtc, uint8_t periodicPulseId);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_SetExternalTrigger
-+
-+ @Description   Sets an external trigger indication and define a callback
-+                routine to be called on such event.
-+
-+ @Param[in]     h_FmRtc                         - Handle to FM RTC object.
-+ @Param[in]     p_FmRtcExternalTriggerParams    - External Trigger parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously initialized using FM_RTC_Init().
-+*//***************************************************************************/
-+t_Error FM_RTC_SetExternalTrigger(t_Handle h_FmRtc, t_FmRtcExternalTriggerParams *p_FmRtcExternalTriggerParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_ClearExternalTrigger
-+
-+ @Description   Clears external trigger indication.
-+
-+ @Param[in]     h_FmRtc                         - Handle to FM RTC object.
-+ @Param[in]     id                              - External Trigger id.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously initialized using FM_RTC_Init().
-+*//***************************************************************************/
-+t_Error FM_RTC_ClearExternalTrigger(t_Handle h_FmRtc, uint8_t id);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_GetExternalTriggerTimeStamp
-+
-+ @Description   Reads the External Trigger TimeStamp.
-+
-+ @Param[in]     h_FmRtc                 - Handle to FM RTC object.
-+ @Param[in]     triggerId               - External Trigger id.
-+ @Param[out]    p_TimeStamp             - External Trigger timestamp (in nanoseconds).
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously initialized using FM_RTC_Init().
-+*//***************************************************************************/
-+t_Error FM_RTC_GetExternalTriggerTimeStamp(t_Handle             h_FmRtc,
-+                                           uint8_t              triggerId,
-+                                           uint64_t             *p_TimeStamp);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_GetCurrentTime
-+
-+ @Description   Returns the current RTC time.
-+
-+ @Param[in]     h_FmRtc - Handle to FM RTC object.
-+ @Param[out]    p_Ts - returned time stamp (in nanoseconds).
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously initialized using FM_RTC_Init().
-+*//***************************************************************************/
-+t_Error FM_RTC_GetCurrentTime(t_Handle h_FmRtc, uint64_t *p_Ts);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_SetCurrentTime
-+
-+ @Description   Sets the current RTC time.
-+
-+ @Param[in]     h_FmRtc - Handle to FM RTC object.
-+ @Param[in]     ts - The new time stamp (in nanoseconds).
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously initialized using FM_RTC_Init().
-+*//***************************************************************************/
-+t_Error FM_RTC_SetCurrentTime(t_Handle h_FmRtc, uint64_t ts);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_GetFreqCompensation
-+
-+ @Description   Retrieves the frequency compensation value
-+
-+ @Param[in]     h_FmRtc         - Handle to FM RTC object.
-+ @Param[out]    p_Compensation  - A pointer to the returned value of compensation.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously initialized using FM_RTC_Init().
-+*//***************************************************************************/
-+t_Error FM_RTC_GetFreqCompensation(t_Handle h_FmRtc, uint32_t *p_Compensation);
-+
-+/**************************************************************************//**
-+ @Function      FM_RTC_SetFreqCompensation
-+
-+ @Description   Sets a new frequency compensation value.
-+
-+ @Param[in]     h_FmRtc             - Handle to FM RTC object.
-+ @Param[in]     freqCompensation    - The new frequency compensation value to set.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      h_FmRtc must have been previously initialized using FM_RTC_Init().
-+*//***************************************************************************/
-+t_Error FM_RTC_SetFreqCompensation(t_Handle h_FmRtc, uint32_t freqCompensation);
-+
-+#ifdef CONFIG_PTP_1588_CLOCK_DPAA
-+/**************************************************************************//**
-+*@Function      FM_RTC_EnableInterrupt
-+*
-+*@Description   Enable interrupt of FM RTC.
-+*
-+*@Param[in]     h_FmRtc             - Handle to FM RTC object.
-+*@Param[in]     events              - Interrupt events.
-+*
-+*@Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_RTC_EnableInterrupt(t_Handle h_FmRtc, uint32_t events);
-+
-+/**************************************************************************//**
-+*@Function      FM_RTC_DisableInterrupt
-+*
-+*@Description   Disable interrupt of FM RTC.
-+*
-+*@Param[in]     h_FmRtc             - Handle to FM RTC object.
-+*@Param[in]     events              - Interrupt events.
-+*
-+*@Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_RTC_DisableInterrupt(t_Handle h_FmRtc, uint32_t events);
-+#endif
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+/**************************************************************************//**
-+ @Function      FM_RTC_DumpRegs
-+
-+ @Description   Dumps all FM registers
-+
-+ @Param[in]     h_FmRtc      A handle to an FM RTC Module.
-+
-+ @Return        E_OK on success;
-+
-+ @Cautions      Allowed only FM_Init().
-+*//***************************************************************************/
-+t_Error FM_RTC_DumpRegs(t_Handle h_FmRtc);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+/** @} */ /* end of fm_rtc_control_grp */
-+/** @} */ /* end of fm_rtc_grp */
-+/** @} */ /* end of FM_grp group */
-+
-+
-+#endif /* __FM_RTC_EXT_H__ */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_vsp_ext.h
-@@ -0,0 +1,411 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          fm_vsp_ext.h
-+
-+ @Description   FM Virtual Storage-Profile ...
-+*//***************************************************************************/
-+#ifndef __FM_VSP_EXT_H
-+#define __FM_VSP_EXT_H
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "string_ext.h"
-+#include "debug_ext.h"
-+
-+#include "fm_ext.h"
-+
-+
-+/**************************************************************************//**
-+
-+ @Group         FM_grp Frame Manager API
-+
-+ @Description   FM API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         FM_VSP_grp FM Virtual-Storage-Profile
-+
-+ @Description   FM Virtual-Storage-Profile API
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         FM_VSP_init_grp FM VSP Initialization Unit
-+
-+ @Description   FM VSP initialization API.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   Virtual Storage Profile
-+*//***************************************************************************/
-+typedef struct t_FmVspParams {
-+    t_Handle            h_Fm;               /**< A handle to the FM object this VSP related to */
-+    t_FmExtPools        extBufPools;        /**< Which external buffer pools are used
-+                                                 (up to FM_PORT_MAX_NUM_OF_EXT_POOLS), and their sizes.
-+                                                 parameter associated with Rx / OP port */
-+    uint16_t            liodnOffset;        /**< VSP's LIODN offset */
-+    struct {
-+        e_FmPortType    portType;           /**< Port type */
-+        uint8_t         portId;             /**< Port Id - relative to type */
-+    } portParams;
-+    uint8_t             relativeProfileId;  /**< VSP Id - relative to VSP's range
-+                                                 defined in relevant FM object */
-+} t_FmVspParams;
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_Config
-+
-+ @Description   Creates descriptor for the FM VSP module.
-+
-+                The routine returns a handle (descriptor) to the FM VSP object.
-+                This descriptor must be passed as first parameter to all other
-+                FM VSP function calls.
-+
-+                No actual initialization or configuration of FM hardware is
-+                done by this routine.
-+
-+@Param[in]      p_FmVspParams   Pointer to data structure of parameters
-+
-+ @Retval        Handle to FM VSP object, or NULL for Failure.
-+*//***************************************************************************/
-+t_Handle FM_VSP_Config(t_FmVspParams *p_FmVspParams);
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_Init
-+
-+ @Description   Initializes the FM VSP module
-+
-+ @Param[in]     h_FmVsp - FM VSP module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_VSP_Init(t_Handle h_FmVsp);
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_Free
-+
-+ @Description   Frees all resources that were assigned to FM VSP module.
-+
-+                Calling this routine invalidates the descriptor.
-+
-+ @Param[in]     h_FmVsp - FM VSP module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error FM_VSP_Free(t_Handle h_FmVsp);
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_VSP_adv_config_grp  FM VSP Advanced Configuration Unit
-+
-+ @Description   FM VSP advanced configuration functions.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_ConfigBufferPrefixContent
-+
-+ @Description   Defines the structure, size and content of the application buffer.
-+
-+                The prefix will
-+                In VSPs defined for Tx ports, if 'passPrsResult', the application
-+                should set a value to their offsets in the prefix of
-+                the FM will save the first 'privDataSize', than,
-+                depending on 'passPrsResult' and 'passTimeStamp', copy parse result
-+                and timeStamp, and the packet itself (in this order), to the
-+                application buffer, and to offset.
-+
-+                Calling this routine changes the buffer margins definitions
-+                in the internal driver data base from its default
-+                configuration: Data size:  [DEFAULT_FM_SP_bufferPrefixContent_privDataSize]
-+                               Pass Parser result: [DEFAULT_FM_SP_bufferPrefixContent_passPrsResult].
-+                               Pass timestamp: [DEFAULT_FM_SP_bufferPrefixContent_passTimeStamp].
-+
-+ @Param[in]     h_FmVsp                         A handle to a FM VSP module.
-+ @Param[in,out] p_FmBufferPrefixContent         A structure of parameters describing the
-+                                                structure of the buffer.
-+                                                Out parameter: Start margin - offset
-+                                                of data from start of external buffer.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_VSP_Config() and before FM_VSP_Init().
-+*//***************************************************************************/
-+t_Error FM_VSP_ConfigBufferPrefixContent(t_Handle                   h_FmVsp,
-+                                         t_FmBufferPrefixContent    *p_FmBufferPrefixContent);
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_ConfigDmaSwapData
-+
-+ @Description   Calling this routine changes the DMA swap data parameter
-+                in the internal driver data base from its default
-+                configuration  [DEFAULT_FM_SP_dmaSwapData]
-+
-+ @Param[in]     h_FmVsp     A handle to a FM VSP module.
-+ @Param[in]     swapData    New selection
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_VSP_Config() and before FM_VSP_Init().
-+*//***************************************************************************/
-+t_Error FM_VSP_ConfigDmaSwapData(t_Handle h_FmVsp, e_FmDmaSwapOption swapData);
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_ConfigDmaIcCacheAttr
-+
-+ @Description   Calling this routine changes the internal context cache
-+                attribute parameter in the internal driver data base
-+                from its default configuration  [DEFAULT_FM_SP_dmaIntContextCacheAttr]
-+
-+ @Param[in]     h_FmVsp                 A handle to a FM VSP module.
-+ @Param[in]     intContextCacheAttr     New selection
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_VSP_Config() and before FM_VSP_Init().
-+*//***************************************************************************/
-+t_Error FM_VSP_ConfigDmaIcCacheAttr(t_Handle            h_FmVsp,
-+                                    e_FmDmaCacheOption  intContextCacheAttr);
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_ConfigDmaHdrAttr
-+
-+ @Description   Calling this routine changes the header cache
-+                attribute parameter in the internal driver data base
-+                from its default configuration  [DEFAULT_FM_SP_dmaHeaderCacheAttr]
-+
-+ @Param[in]     h_FmVsp                     A handle to a FM VSP module.
-+ @Param[in]     headerCacheAttr             New selection
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_VSP_Config() and before FM_VSP_Init().
-+*//***************************************************************************/
-+t_Error FM_VSP_ConfigDmaHdrAttr(t_Handle h_FmVsp, e_FmDmaCacheOption headerCacheAttr);
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_ConfigDmaScatterGatherAttr
-+
-+ @Description   Calling this routine changes the scatter gather cache
-+                attribute parameter in the internal driver data base
-+                from its default configuration [DEFAULT_FM_SP_dmaScatterGatherCacheAttr]
-+
-+ @Param[in]     h_FmVsp                     A handle to a FM VSP module.
-+ @Param[in]     scatterGatherCacheAttr      New selection
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_VSP_Config() and before FM_VSP_Init().
-+*//***************************************************************************/
-+t_Error FM_VSP_ConfigDmaScatterGatherAttr(t_Handle              h_FmVsp,
-+                                          e_FmDmaCacheOption    scatterGatherCacheAttr);
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_ConfigDmaWriteOptimize
-+
-+ @Description   Calling this routine changes the write optimization
-+                parameter in the internal driver data base
-+                from its default configuration: optimize = [DEFAULT_FM_SP_dmaWriteOptimize]
-+
-+ @Param[in]     h_FmVsp     A handle to a FM VSP module.
-+ @Param[in]     optimize    TRUE to enable optimization, FALSE for normal operation
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_VSP_Config() and before FM_VSP_Init().
-+*//***************************************************************************/
-+t_Error FM_VSP_ConfigDmaWriteOptimize(t_Handle h_FmVsp, bool optimize);
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_ConfigNoScatherGather
-+
-+ @Description   Calling this routine changes the possibility to receive S/G frame
-+                in the internal driver data base
-+                from its default configuration: optimize = [DEFAULT_FM_SP_noScatherGather]
-+
-+ @Param[in]     h_FmVsp             A handle to a FM VSP module.
-+ @Param[in]     noScatherGather     TRUE to operate without scatter/gather capability.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_VSP_Config() and before FM_VSP_Init().
-+*//***************************************************************************/
-+t_Error FM_VSP_ConfigNoScatherGather(t_Handle h_FmVsp, bool noScatherGather);
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_ConfigPoolDepletion
-+
-+ @Description   Calling this routine enables pause frame generation depending on the
-+                depletion status of BM pools. It also defines the conditions to activate
-+                this functionality. By default, this functionality is disabled.
-+
-+ @Param[in]     h_FmVsp                 A handle to a FM VSP module.
-+ @Param[in]     p_BufPoolDepletion      A structure of pool depletion parameters
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_VSP_Config() and before FM_VSP_Init().
-+*//***************************************************************************/
-+t_Error FM_VSP_ConfigPoolDepletion(t_Handle h_FmVsp, t_FmBufPoolDepletion *p_BufPoolDepletion);
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_ConfigBackupPools
-+
-+ @Description   Calling this routine allows the configuration of some of the BM pools
-+                defined for this port as backup pools.
-+                A pool configured to be a backup pool will be used only if all other
-+                enabled non-backup pools are depleted.
-+
-+ @Param[in]     h_FmVsp                 A handle to a FM VSP module.
-+ @Param[in]     p_BackupBmPools         An array of pool id's. All pools specified here will
-+                                        be defined as backup pools.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_VSP_Config() and before FM_VSP_Init().
-+*//***************************************************************************/
-+t_Error FM_VSP_ConfigBackupPools(t_Handle h_FmVsp, t_FmBackupBmPools *p_BackupBmPools);
-+
-+/** @} */ /* end of FM_VSP_adv_config_grp group */
-+/** @} */ /* end of FM_VSP_init_grp group */
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_VSP_control_grp FM VSP Control Unit
-+
-+ @Description   FM VSP runtime control API.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_GetBufferDataOffset
-+
-+ @Description   Relevant for Rx ports.
-+                Returns the data offset from the beginning of the data buffer
-+
-+ @Param[in]     h_FmVsp - FM PORT module descriptor
-+
-+ @Return        data offset.
-+
-+ @Cautions      Allowed only following FM_VSP_Init().
-+*//***************************************************************************/
-+uint32_t FM_VSP_GetBufferDataOffset(t_Handle h_FmVsp);
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_GetBufferICInfo
-+
-+ @Description   Returns the Internal Context offset from the beginning of the data buffer
-+
-+ @Param[in]     h_FmVsp - FM PORT module descriptor
-+ @Param[in]     p_Data   - A pointer to the data buffer.
-+
-+ @Return        Internal context info pointer on success, NULL if 'allOtherInfo' was not
-+                configured for this port.
-+
-+ @Cautions      Allowed only following FM_VSP_Init().
-+*//***************************************************************************/
-+uint8_t * FM_VSP_GetBufferICInfo(t_Handle h_FmVsp, char *p_Data);
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_GetBufferPrsResult
-+
-+ @Description   Returns the pointer to the parse result in the data buffer.
-+                In Rx ports this is relevant after reception, if parse
-+                result is configured to be part of the data passed to the
-+                application. For non Rx ports it may be used to get the pointer
-+                of the area in the buffer where parse result should be
-+                initialized - if so configured.
-+                See FM_VSP_ConfigBufferPrefixContent for data buffer prefix
-+                configuration.
-+
-+ @Param[in]     h_FmVsp    - FM PORT module descriptor
-+ @Param[in]     p_Data      - A pointer to the data buffer.
-+
-+ @Return        Parse result pointer on success, NULL if parse result was not
-+                configured for this port.
-+
-+ @Cautions      Allowed only following FM_VSP_Init().
-+*//***************************************************************************/
-+t_FmPrsResult * FM_VSP_GetBufferPrsResult(t_Handle h_FmVsp, char *p_Data);
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_GetBufferTimeStamp
-+
-+ @Description   Returns the time stamp in the data buffer.
-+                Relevant for Rx ports for getting the buffer time stamp.
-+                See FM_VSP_ConfigBufferPrefixContent for data buffer prefix
-+                configuration.
-+
-+ @Param[in]     h_FmVsp    - FM PORT module descriptor
-+ @Param[in]     p_Data      - A pointer to the data buffer.
-+
-+ @Return        A pointer to the hash result on success, NULL otherwise.
-+
-+ @Cautions      Allowed only following FM_VSP_Init().
-+*//***************************************************************************/
-+uint64_t * FM_VSP_GetBufferTimeStamp(t_Handle h_FmVsp, char *p_Data);
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_GetBufferHashResult
-+
-+ @Description   Given a data buffer, on the condition that hash result was defined
-+                as a part of the buffer content (see FM_VSP_ConfigBufferPrefixContent)
-+                this routine will return the pointer to the hash result location in the
-+                buffer prefix.
-+
-+ @Param[in]     h_FmVsp    - FM PORT module descriptor
-+ @Param[in]     p_Data      - A pointer to the data buffer.
-+
-+ @Return        A pointer to the hash result on success, NULL otherwise.
-+
-+ @Cautions      Allowed only following FM_VSP_Init().
-+*//***************************************************************************/
-+uint8_t * FM_VSP_GetBufferHashResult(t_Handle h_FmVsp, char *p_Data);
-+
-+
-+/** @} */ /* end of FM_VSP_control_grp group */
-+/** @} */ /* end of FM_VSP_grp group */
-+/** @} */ /* end of FM_grp group */
-+
-+
-+#endif /* __FM_VSP_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/mii_acc_ext.h
-@@ -0,0 +1,76 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+
-+#ifndef __MII_ACC_EXT_H
-+#define __MII_ACC_EXT_H
-+
-+
-+/**************************************************************************//**
-+ @Function      MII_ReadPhyReg
-+
-+ @Description   This routine is called to read a specified PHY
-+                register value.
-+
-+ @Param[in]     h_MiiAccess - Handle to MII configuration access registers
-+ @Param[in]     phyAddr     - PHY address (0-31).
-+ @Param[in]     reg         - PHY register to read
-+ @Param[out]    p_Data      - Gets the register value.
-+
-+ @Return        Always zero (success).
-+*//***************************************************************************/
-+int MII_ReadPhyReg(t_Handle h_MiiAccess,
-+                   uint8_t  phyAddr,
-+                   uint8_t  reg,
-+                   uint16_t *p_Data);
-+
-+/**************************************************************************//**
-+ @Function      MII_WritePhyReg
-+
-+ @Description   This routine is called to write data to a specified PHY
-+                   register.
-+
-+ @Param[in]     h_MiiAccess - Handle to MII configuration access registers
-+ @Param[in]     phyAddr     - PHY address (0-31).
-+ @Param[in]     reg         - PHY register to write
-+ @Param[in]     data        - Data to write in register.
-+
-+ @Return        Always zero (success).
-+*//***************************************************************************/
-+int MII_WritePhyReg(t_Handle    h_MiiAccess,
-+                    uint8_t     phyAddr,
-+                    uint8_t     reg,
-+                    uint16_t    data);
-+
-+
-+#endif /* __MII_ACC_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/core_ext.h
-@@ -0,0 +1,90 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          core_ext.h
-+
-+ @Description   Generic interface to basic core operations.
-+
-+                The system integrator must ensure that this interface is
-+                mapped to a specific core implementation, by including the
-+                appropriate header file.
-+*//***************************************************************************/
-+#ifndef __CORE_EXT_H
-+#define __CORE_EXT_H
-+
-+#ifdef CONFIG_FMAN_ARM
-+#include "arm_ext.h"
-+#include <linux/smp.h>
-+#else
-+#ifdef NCSW_PPC_CORE
-+#include "ppc_ext.h"
-+#elif defined(NCSW_VXWORKS)
-+#include "core_vxw_ext.h"
-+#else
-+#error "Core is not defined!"
-+#endif /* NCSW_CORE */
-+
-+#if (!defined(CORE_IS_LITTLE_ENDIAN) && !defined(CORE_IS_BIG_ENDIAN))
-+#error "Must define core as little-endian or big-endian!"
-+#endif /* (!defined(CORE_IS_LITTLE_ENDIAN) && ... */
-+
-+#ifndef CORE_CACHELINE_SIZE
-+#error "Must define the core cache-line size!"
-+#endif /* !CORE_CACHELINE_SIZE */
-+
-+#endif /* CONFIG_FMAN_ARM */
-+
-+
-+/**************************************************************************//**
-+ @Function      CORE_GetId
-+
-+ @Description   Returns the core ID in the system.
-+
-+ @Return        Core ID.
-+*//***************************************************************************/
-+uint32_t CORE_GetId(void);
-+
-+/**************************************************************************//**
-+ @Function      CORE_MemoryBarrier
-+
-+ @Description   This routine will cause the core to stop executing any commands
-+                until all previous memory read/write commands are completely out
-+                of the core's pipeline.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void CORE_MemoryBarrier(void);
-+#define fsl_mem_core_barrier() CORE_MemoryBarrier()
-+
-+#endif /* __CORE_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/cores/arm_ext.h
-@@ -0,0 +1,55 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          arm_ext.h
-+
-+ @Description   Core API for ARM cores
-+
-+                These routines must be implemented by each specific PowerPC
-+                core driver.
-+*//***************************************************************************/
-+#ifndef __ARM_EXT_H
-+#define __ARM_EXT_H
-+
-+#include "part_ext.h"
-+
-+
-+#define CORE_IS_LITTLE_ENDIAN
-+
-+static __inline__ void CORE_MemoryBarrier(void)
-+{
-+	mb();
-+}
-+
-+#endif /* __PPC_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/cores/e500v2_ext.h
-@@ -0,0 +1,476 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          e500v2_ext.h
-+
-+ @Description   E500 external definitions prototypes
-+                This file is not included by the E500
-+                source file as it is an assembly file. It is used
-+                only for prototypes exposure, for inclusion
-+                by user and other modules.
-+*//***************************************************************************/
-+
-+#ifndef __E500V2_EXT_H
-+#define __E500V2_EXT_H
-+
-+#include "std_ext.h"
-+
-+
-+/* Layer 1 Cache Manipulations
-+ *==============================
-+ * Should not be called directly by the user.
-+ */
-+void        L1DCache_Invalidate (void);
-+void        L1ICache_Invalidate(void);
-+void        L1DCache_Enable(void);
-+void        L1ICache_Enable(void);
-+void        L1DCache_Disable(void);
-+void        L1ICache_Disable(void);
-+void        L1DCache_Flush(void);
-+void        L1ICache_Flush(void);
-+uint32_t    L1ICache_IsEnabled(void);
-+uint32_t    L1DCache_IsEnabled(void);
-+/*
-+ *
-+ */
-+uint32_t    L1DCache_LineLock(uint32_t addr);
-+uint32_t    L1ICache_LineLock(uint32_t addr);
-+void        L1Cache_BroadCastEnable(void);
-+void        L1Cache_BroadCastDisable(void);
-+
-+
-+#define CORE_DCacheEnable       E500_DCacheEnable
-+#define CORE_ICacheEnable       E500_ICacheEnable
-+#define CORE_DCacheDisable      E500_DCacheDisable
-+#define CORE_ICacheDisable      E500_ICacheDisable
-+#define CORE_GetId              E500_GetId
-+#define CORE_TestAndSet         E500_TestAndSet
-+#define CORE_MemoryBarrier      E500_MemoryBarrier
-+#define CORE_InstructionSync    E500_InstructionSync
-+
-+#define CORE_SetDozeMode        E500_SetDozeMode
-+#define CORE_SetNapMode         E500_SetNapMode
-+#define CORE_SetSleepMode       E500_SetSleepMode
-+#define CORE_SetJogMode         E500_SetJogMode
-+#define CORE_SetDeepSleepMode   E500_SetDeepSleepMode
-+
-+#define CORE_RecoverDozeMode    E500_RecoverDozeMode
-+#define CORE_RecoverNapMode     E500_RecoverNapMode
-+#define CORE_RecoverSleepMode   E500_RecoverSleepMode
-+#define CORE_RecoverJogMode     E500_RecoverJogMode
-+
-+void E500_SetDozeMode(void);
-+void E500_SetNapMode(void);
-+void E500_SetSleepMode(void);
-+void E500_SetJogMode(void);
-+t_Error E500_SetDeepSleepMode(uint32_t bptrAddress);
-+
-+void E500_RecoverDozeMode(void);
-+void E500_RecoverNapMode(void);
-+void E500_RecoverSleepMode(void);
-+void E500_RecoverJogMode(void);
-+
-+
-+/**************************************************************************//**
-+ @Group         E500_id E500 Application Programming Interface
-+
-+ @Description   E500 API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         E500_init_grp E500 Initialization Unit
-+
-+ @Description   E500 initialization unit API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+
-+/**************************************************************************//**
-+ @Function      E500_DCacheEnable
-+
-+ @Description   Enables the data cache for memory pages that are
-+                not cache inhibited.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void E500_DCacheEnable(void);
-+
-+/**************************************************************************//**
-+ @Function      E500_ICacheEnable
-+
-+ @Description   Enables the instruction cache for memory pages that are
-+                not cache inhibited.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void E500_ICacheEnable(void);
-+
-+/**************************************************************************//**
-+ @Function      E500_DCacheDisable
-+
-+ @Description   Disables the data cache.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void E500_DCacheDisable(void);
-+
-+/**************************************************************************//**
-+ @Function      E500_ICacheDisable
-+
-+ @Description   Disables the instruction cache.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void E500_ICacheDisable(void);
-+
-+/**************************************************************************//**
-+ @Function      E500_DCacheFlush
-+
-+ @Description   Flushes the data cache
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void E500_DCacheFlush(void);
-+
-+/**************************************************************************//**
-+ @Function      E500_ICacheFlush
-+
-+ @Description   Flushes the instruction cache.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void E500_ICacheFlush(void);
-+
-+/**************************************************************************//**
-+ @Function      E500_DCacheSetStashId
-+
-+ @Description   Set Stash Id for data cache
-+
-+ @Param[in]     stashId     the stash id to be set.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void E500_DCacheSetStashId(uint8_t stashId);
-+
-+/**************************************************************************//**
-+ @Description   E500mc L2 Cache Operation Mode
-+*//***************************************************************************/
-+typedef enum e_E500mcL2CacheMode
-+{
-+    e_L2_CACHE_MODE_DATA_ONLY      = 0x00000001,   /**< Cache data only */
-+    e_L2_CACHE_MODE_INST_ONLY      = 0x00000002,   /**< Cache instructions only */
-+    e_L2_CACHE_MODE_DATA_AND_INST  = 0x00000003    /**< Cache data and instructions */
-+} e_E500mcL2CacheMode;
-+
-+#if defined(CORE_E500MC) || defined(CORE_E5500)
-+/**************************************************************************//**
-+ @Function      E500_L2CacheEnable
-+
-+ @Description   Enables the cache for memory pages that are not cache inhibited.
-+
-+ @param[in]     mode - L2 cache mode: data only, instruction only or instruction and data.
-+
-+ @Return        None.
-+
-+ @Cautions      This routine must be call only ONCE for both caches. I.e. it is
-+                not possible to call this routine for i-cache and than to call
-+                again for d-cache; The second call will override the first one.
-+*//***************************************************************************/
-+void E500_L2CacheEnable(e_E500mcL2CacheMode mode);
-+
-+/**************************************************************************//**
-+ @Function      E500_L2CacheDisable
-+
-+ @Description   Disables the cache (data instruction or both).
-+
-+ @Return        None.
-+
-+*//***************************************************************************/
-+void E500_L2CacheDisable(void);
-+
-+/**************************************************************************//**
-+ @Function      E500_L2CacheFlush
-+
-+ @Description   Flushes the cache.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void E500_L2CacheFlush(void);
-+
-+/**************************************************************************//**
-+ @Function      E500_L2SetStashId
-+
-+ @Description   Set Stash Id
-+
-+ @Param[in]     stashId     the stash id to be set.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void E500_L2SetStashId(uint8_t stashId);
-+#endif /* defined(CORE_E500MC) || defined(CORE_E5500) */
-+
-+#ifdef CORE_E6500
-+/**************************************************************************//**
-+ @Function      E6500_L2CacheEnable
-+
-+ @Description   Enables the cache for memory pages that are not cache inhibited.
-+
-+ @param[in]     mode - L2 cache mode: support data & instruction only.
-+
-+ @Return        None.
-+
-+ @Cautions      This routine must be call only ONCE for both caches. I.e. it is
-+                not possible to call this routine for i-cache and than to call
-+                again for d-cache; The second call will override the first one.
-+*//***************************************************************************/
-+void E6500_L2CacheEnable(uintptr_t clusterBase);
-+
-+/**************************************************************************//**
-+ @Function      E6500_L2CacheDisable
-+
-+ @Description   Disables the cache (data instruction or both).
-+
-+ @Return        None.
-+
-+*//***************************************************************************/
-+void E6500_L2CacheDisable(uintptr_t clusterBase);
-+
-+/**************************************************************************//**
-+ @Function      E6500_L2CacheFlush
-+
-+ @Description   Flushes the cache.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void E6500_L2CacheFlush(uintptr_t clusterBase);
-+
-+/**************************************************************************//**
-+ @Function      E6500_L2SetStashId
-+
-+ @Description   Set Stash Id
-+
-+ @Param[in]     stashId     the stash id to be set.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void E6500_L2SetStashId(uintptr_t clusterBase, uint8_t stashId);
-+
-+/**************************************************************************//**
-+ @Function      E6500_GetCcsrBase
-+
-+ @Description   Obtain SoC CCSR base address
-+
-+ @Param[in]     None.
-+
-+ @Return        Physical CCSR base address.
-+*//***************************************************************************/
-+physAddress_t E6500_GetCcsrBase(void);
-+#endif /* CORE_E6500 */
-+
-+/**************************************************************************//**
-+ @Function      E500_AddressBusStreamingEnable
-+
-+ @Description   Enables address bus streaming on the CCB.
-+
-+                This setting, along with the ECM streaming configuration
-+                parameters, enables address bus streaming on the CCB.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void E500_AddressBusStreamingEnable(void);
-+
-+/**************************************************************************//**
-+ @Function      E500_AddressBusStreamingDisable
-+
-+ @Description   Disables address bus streaming on the CCB.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void E500_AddressBusStreamingDisable(void);
-+
-+/**************************************************************************//**
-+ @Function      E500_AddressBroadcastEnable
-+
-+ @Description   Enables address broadcast.
-+
-+                The e500 broadcasts cache management instructions (dcbst, dcblc
-+                (CT = 1), icblc (CT = 1), dcbf, dcbi, mbar, msync, tlbsync, icbi)
-+                based on ABE. ABE must be set to allow management of external
-+                L2 caches.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void E500_AddressBroadcastEnable(void);
-+
-+/**************************************************************************//**
-+ @Function      E500_AddressBroadcastDisable
-+
-+ @Description   Disables address broadcast.
-+
-+                The e500 broadcasts cache management instructions (dcbst, dcblc
-+                (CT = 1), icblc (CT = 1), dcbf, dcbi, mbar, msync, tlbsync, icbi)
-+                based on ABE. ABE must be set to allow management of external
-+                L2 caches.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void E500_AddressBroadcastDisable(void);
-+
-+/**************************************************************************//**
-+ @Function      E500_IsTaskletSupported
-+
-+ @Description   Checks if tasklets are supported by the e500 interrupt handler.
-+
-+ @Retval        TRUE    - Tasklets are supported.
-+ @Retval        FALSE   - Tasklets are not supported.
-+*//***************************************************************************/
-+bool E500_IsTaskletSupported(void);
-+
-+void E500_EnableTimeBase(void);
-+void E500_DisableTimeBase(void);
-+
-+uint64_t E500_GetTimeBaseTime(void);
-+
-+void E500_GenericIntrInit(void);
-+
-+t_Error E500_SetIntr(int        ppcIntrSrc,
-+                     void       (* Isr)(t_Handle handle),
-+                     t_Handle   handle);
-+
-+t_Error E500_ClearIntr(int ppcIntrSrc);
-+
-+/**************************************************************************//**
-+ @Function      E500_GenericIntrHandler
-+
-+ @Description   This is the general e500 interrupt handler.
-+
-+                It is called by the main assembly interrupt handler
-+                when an exception occurs and no other function has been
-+                assigned to this exception.
-+
-+ @Param         intrEntry   - (In) The exception interrupt vector entry.
-+*//***************************************************************************/
-+void E500_GenericIntrHandler(uint32_t intrEntry);
-+
-+/**************************************************************************//**
-+ @Function      CriticalIntr
-+
-+ @Description   This is the specific critical e500 interrupt handler.
-+
-+                It is called by the main assembly interrupt handler
-+                when an critical interrupt.
-+
-+ @Param         intrEntry   - (In) The exception interrupt vector entry.
-+*//***************************************************************************/
-+void CriticalIntr(uint32_t intrEntry);
-+
-+
-+/**************************************************************************//**
-+ @Function      E500_GetId
-+
-+ @Description   Returns the core ID in the system.
-+
-+ @Return        Core ID.
-+*//***************************************************************************/
-+uint32_t E500_GetId(void);
-+
-+/**************************************************************************//**
-+ @Function      E500_TestAndSet
-+
-+ @Description   This routine tries to atomically test-and-set an integer
-+                in memory to a non-zero value.
-+
-+                The memory will be set only if it is tested as zero, in which
-+                case the routine returns the new non-zero value; otherwise the
-+                routine returns zero.
-+
-+ @Param[in]     p - pointer to a volatile int in memory, on which test-and-set
-+                    operation should be made.
-+
-+ @Retval        Zero        - Operation failed - memory was already set.
-+ @Retval        Non-zero    - Operation succeeded - memory has been set.
-+*//***************************************************************************/
-+int E500_TestAndSet(volatile int *p);
-+
-+/**************************************************************************//**
-+ @Function      E500_MemoryBarrier
-+
-+ @Description   This routine will cause the core to stop executing any commands
-+                until all previous memory read/write commands are completely out
-+                of the core's pipeline.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+static __inline__ void E500_MemoryBarrier(void)
-+{
-+#ifndef CORE_E500V2
-+    __asm__ ("mbar 1");
-+#else  /* CORE_E500V2 */
-+    /**** ERRATA WORK AROUND START ****/
-+    /* ERRATA num:  CPU1 */
-+    /* Description: "mbar MO = 1" instruction fails to order caching-inhibited
-+                    guarded loads and stores. */
-+
-+    /* "msync" instruction is used instead */
-+
-+    __asm__ ("msync");
-+
-+    /**** ERRATA WORK AROUND END ****/
-+#endif /* CORE_E500V2 */
-+}
-+
-+/**************************************************************************//**
-+ @Function      E500_InstructionSync
-+
-+ @Description   This routine will cause the core to wait for previous instructions
-+                (including any interrupts they generate) to complete before the
-+                synchronization command executes, which purges all instructions
-+                from the processor's pipeline and refetches the next instruction.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+static __inline__ void E500_InstructionSync(void)
-+{
-+    __asm__ ("isync");
-+}
-+
-+
-+/** @} */ /* end of E500_init_grp group */
-+/** @} */ /* end of E500_grp group */
-+
-+
-+#endif /* __E500V2_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/cores/ppc_ext.h
-@@ -0,0 +1,141 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          ppc_ext.h
-+
-+ @Description   Core API for PowerPC cores
-+
-+                These routines must be implemented by each specific PowerPC
-+                core driver.
-+*//***************************************************************************/
-+#ifndef __PPC_EXT_H
-+#define __PPC_EXT_H
-+
-+#include "part_ext.h"
-+
-+
-+#define CORE_IS_BIG_ENDIAN
-+
-+#if defined(CORE_E300) || defined(CORE_E500V2)
-+#define CORE_CACHELINE_SIZE     32
-+#elif defined(CORE_E500MC) || defined(CORE_E5500) || defined(CORE_E6500)
-+#define CORE_CACHELINE_SIZE     64
-+#else
-+#error "Core not defined!"
-+#endif /* defined(CORE_E300) || ... */
-+
-+
-+/**************************************************************************//**
-+ @Function      CORE_TestAndSet
-+
-+ @Description   This routine tries to atomically test-and-set an integer
-+                in memory to a non-zero value.
-+
-+                The memory will be set only if it is tested as zero, in which
-+                case the routine returns the new non-zero value; otherwise the
-+                routine returns zero.
-+
-+ @Param[in]     p - pointer to a volatile int in memory, on which test-and-set
-+                    operation should be made.
-+
-+ @Retval        Zero        - Operation failed - memory was already set.
-+ @Retval        Non-zero    - Operation succeeded - memory has been set.
-+*//***************************************************************************/
-+int CORE_TestAndSet(volatile int *p);
-+
-+/**************************************************************************//**
-+ @Function      CORE_InstructionSync
-+
-+ @Description   This routine will cause the core to wait for previous instructions
-+                (including any interrupts they generate) to complete before the
-+                synchronization command executes, which purges all instructions
-+                from the processor's pipeline and refetches the next instruction.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void CORE_InstructionSync(void);
-+
-+/**************************************************************************//**
-+ @Function      CORE_DCacheEnable
-+
-+ @Description   Enables the data cache for memory pages that are
-+                not cache inhibited.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void CORE_DCacheEnable(void);
-+
-+/**************************************************************************//**
-+ @Function      CORE_ICacheEnable
-+
-+ @Description   Enables the instruction cache for memory pages that are
-+                not cache inhibited.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void CORE_ICacheEnable(void);
-+
-+/**************************************************************************//**
-+ @Function      CORE_DCacheDisable
-+
-+ @Description   Disables the data cache.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void CORE_DCacheDisable(void);
-+
-+/**************************************************************************//**
-+ @Function      CORE_ICacheDisable
-+
-+ @Description   Disables the instruction cache.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void CORE_ICacheDisable(void);
-+
-+
-+
-+#if defined(CORE_E300)
-+#include "e300_ext.h"
-+#elif defined(CORE_E500V2) || defined(CORE_E500MC) || defined(CORE_E5500) || defined(CORE_E6500)
-+#include "e500v2_ext.h"
-+#if !defined(NCSW_LINUX)
-+#include "e500v2_asm_ext.h"
-+#endif
-+#else
-+#error "Core not defined!"
-+#endif
-+
-+
-+#endif /* __PPC_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/ddr_std_ext.h
-@@ -0,0 +1,77 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __DDR_SDT_EXT_H
-+#define __DDR_SDT_EXT_H
-+
-+
-+/**************************************************************************//**
-+ @Group         ddr_Generic_Resources
-+
-+ @Description   ddr generic functions, definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+
-+/**************************************************************************//**
-+ @Description   SPD maximum size
-+*//***************************************************************************/
-+#define SPD_MAX_SIZE 256
-+
-+/**************************************************************************//**
-+ @Description   DDR types select
-+*//***************************************************************************/
-+typedef enum e_DdrType
-+{
-+    e_DDR_DDR1,
-+    e_DDR_DDR2,
-+    e_DDR_DDR3,
-+    e_DDR_DDR3L,
-+    e_DDR_DDR4
-+} e_DdrType;
-+
-+/**************************************************************************//**
-+ @Description   DDR Mode.
-+*//***************************************************************************/
-+typedef enum e_DdrMode
-+{
-+    e_DDR_BUS_WIDTH_32BIT,
-+    e_DDR_BUS_WIDTH_64BIT
-+} e_DdrMode;
-+
-+/** @} */ /* end of ddr_Generic_Resources group */
-+
-+
-+
-+#endif /* __DDR_SDT_EXT_H */
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/debug_ext.h
-@@ -0,0 +1,233 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          debug_ext.h
-+
-+ @Description   Debug mode definitions.
-+*//***************************************************************************/
-+
-+#ifndef __DEBUG_EXT_H
-+#define __DEBUG_EXT_H
-+
-+#include "std_ext.h"
-+#include "xx_ext.h"
-+#include "memcpy_ext.h"
-+#if (DEBUG_ERRORS > 0)
-+#include "sprint_ext.h"
-+#include "string_ext.h"
-+#endif /* DEBUG_ERRORS > 0 */
-+
-+
-+#if (DEBUG_ERRORS > 0)
-+
-+/* Internally used macros */
-+
-+#define DUMP_Print          XX_Print
-+#define DUMP_MAX_LEVELS     6
-+#define DUMP_IDX_LEN        6
-+#define DUMP_MAX_STR        64
-+
-+
-+#define _CREATE_DUMP_SUBSTR(phrase) \
-+    dumpTmpLevel = 0; dumpSubStr[0] = '\0'; \
-+    snprintf(dumpTmpStr, DUMP_MAX_STR, "%s", #phrase); \
-+    p_DumpToken = strtok(dumpTmpStr, (dumpIsArr[0] ? "[" : ".")); \
-+    while ((p_DumpToken != NULL) && (dumpTmpLevel < DUMP_MAX_LEVELS)) \
-+    { \
-+        strlcat(dumpSubStr, p_DumpToken, DUMP_MAX_STR); \
-+        if (dumpIsArr[dumpTmpLevel]) \
-+        { \
-+            strlcat(dumpSubStr, dumpIdxStr[dumpTmpLevel], DUMP_MAX_STR); \
-+            p_DumpToken = strtok(NULL, "."); \
-+        } \
-+        if ((p_DumpToken != NULL) && \
-+            ((p_DumpToken = strtok(NULL, (dumpIsArr[++dumpTmpLevel] ? "[" : "."))) != NULL)) \
-+            strlcat(dumpSubStr, ".", DUMP_MAX_STR); \
-+    }
-+
-+
-+/**************************************************************************//**
-+ @Group         gen_id  General Drivers Utilities
-+
-+ @Description   External routines.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         dump_id  Memory and Registers Dump Mechanism
-+
-+ @Description   Macros for dumping memory mapped structures.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   Declaration of dump mechanism variables.
-+
-+                This macro must be declared at the beginning of each routine
-+                which uses the dump mechanism macros, before the routine's code
-+                starts.
-+*//***************************************************************************/
-+#define DECLARE_DUMP \
-+    char    dumpIdxStr[DUMP_MAX_LEVELS + 1][DUMP_IDX_LEN] = { "", }; \
-+    char    dumpSubStr[DUMP_MAX_STR] = ""; \
-+    char    dumpTmpStr[DUMP_MAX_STR] = ""; \
-+    char    *p_DumpToken = NULL; \
-+    int     dumpArrIdx = 0, dumpArrSize = 0, dumpLevel = 0, dumpTmpLevel = 0; \
-+    uint8_t dumpIsArr[DUMP_MAX_LEVELS + 1] = { 0 }; \
-+    /* Prevent warnings if not all used */ \
-+    UNUSED(dumpIdxStr[0][0]); \
-+    UNUSED(dumpSubStr[0]); \
-+    UNUSED(dumpTmpStr[0]); \
-+    UNUSED(p_DumpToken); \
-+    UNUSED(dumpArrIdx); \
-+    UNUSED(dumpArrSize); \
-+    UNUSED(dumpLevel); \
-+    UNUSED(dumpTmpLevel); \
-+    UNUSED(dumpIsArr[0]);
-+
-+
-+/**************************************************************************//**
-+ @Description   Prints a title for a subsequent dumped structure or memory.
-+
-+                The inputs for this macro are the structure/memory title and
-+                its base addresses.
-+*//***************************************************************************/
-+#define DUMP_TITLE(addr, msg)           \
-+    DUMP_Print("\r\n"); DUMP_Print msg; \
-+    if (addr)                           \
-+        DUMP_Print(" (%p)", (addr));    \
-+    DUMP_Print("\r\n---------------------------------------------------------\r\n");
-+
-+/**************************************************************************//**
-+ @Description   Prints a subtitle for a subsequent dumped sub-structure (optional).
-+
-+                The inputs for this macro are the sub-structure subtitle.
-+                A separating line with this subtitle will be printed.
-+*//***************************************************************************/
-+#define DUMP_SUBTITLE(subtitle)  \
-+    DUMP_Print("----------- "); DUMP_Print subtitle; DUMP_Print("\r\n")
-+
-+
-+/**************************************************************************//**
-+ @Description   Dumps a memory region in 4-bytes aligned format.
-+
-+                The inputs for this macro are the base addresses and size
-+                (in bytes) of the memory region.
-+*//***************************************************************************/
-+#define DUMP_MEMORY(addr, size)  \
-+    MemDisp((uint8_t *)(addr), (int)(size))
-+
-+
-+/**************************************************************************//**
-+ @Description   Declares a dump loop, for dumping a sub-structure array.
-+
-+                The inputs for this macro are:
-+                - idx: an index variable, for indexing the sub-structure items
-+                       inside the loop. This variable must be declared separately
-+                       in the beginning of the routine.
-+                - cnt: the number of times to repeat the loop. This number should
-+                       equal the number of items in the sub-structures array.
-+
-+                Note, that the body of the loop must be written inside brackets.
-+*//***************************************************************************/
-+#define DUMP_SUBSTRUCT_ARRAY(idx, cnt) \
-+    for (idx=0, dumpIsArr[dumpLevel++] = 1; \
-+         (idx < cnt) && (dumpLevel > 0) && snprintf(dumpIdxStr[dumpLevel-1], DUMP_IDX_LEN, "[%d]", idx); \
-+         idx++, ((idx < cnt) || (dumpIsArr[--dumpLevel] = 0)))
-+
-+
-+/**************************************************************************//**
-+ @Description   Dumps a structure's member variable.
-+
-+                The input for this macro is the full reference for the member
-+                variable, where the structure is referenced using a pointer.
-+
-+                Note, that a members array must be dumped using DUMP_ARR macro,
-+                rather than using this macro.
-+
-+                If the member variable is part of a sub-structure hierarchy,
-+                the full hierarchy (including array indexing) must be specified.
-+
-+                Examples:   p_Struct->member
-+                            p_Struct->sub.member
-+                            p_Struct->sub[i].member
-+*//***************************************************************************/
-+#define DUMP_VAR(st, phrase) \
-+    do { \
-+        void            *addr = (void *)&((st)->phrase); \
-+        physAddress_t   physAddr = XX_VirtToPhys(addr); \
-+        _CREATE_DUMP_SUBSTR(phrase); \
-+        DUMP_Print("0x%010llX: 0x%08x%8s\t%s\r\n", \
-+                   physAddr, GET_UINT32(*(uint32_t*)addr), "", dumpSubStr); \
-+    } while (0)
-+
-+
-+/**************************************************************************//**
-+ @Description   Dumps a structure's members array.
-+
-+                The input for this macro is the full reference for the members
-+                array, where the structure is referenced using a pointer.
-+
-+                If the members array is part of a sub-structure hierarchy,
-+                the full hierarchy (including array indexing) must be specified.
-+
-+                Examples:   p_Struct->array
-+                            p_Struct->sub.array
-+                            p_Struct->sub[i].array
-+*//***************************************************************************/
-+#define DUMP_ARR(st, phrase) \
-+    do { \
-+        physAddress_t physAddr; \
-+        _CREATE_DUMP_SUBSTR(phrase); \
-+        dumpArrSize = ARRAY_SIZE((st)->phrase); \
-+        for (dumpArrIdx=0; dumpArrIdx < dumpArrSize; dumpArrIdx++) { \
-+            physAddr = XX_VirtToPhys((void *)&((st)->phrase[dumpArrIdx])); \
-+            DUMP_Print("0x%010llX: 0x%08x%8s\t%s[%d]\r\n", \
-+                       physAddr, GET_UINT32((st)->phrase[dumpArrIdx]), "", dumpSubStr, dumpArrIdx); \
-+        } \
-+    } while (0)
-+
-+
-+
-+#endif /* DEBUG_ERRORS > 0 */
-+
-+
-+/** @} */ /* end of dump_id group */
-+/** @} */ /* end of gen_id group */
-+
-+
-+#endif /* __DEBUG_EXT_H */
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/endian_ext.h
-@@ -0,0 +1,447 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+
-+ @File          endian_ext.h
-+
-+ @Description   Big/little endian swapping routines.
-+*//***************************************************************************/
-+
-+#ifndef __ENDIAN_EXT_H
-+#define __ENDIAN_EXT_H
-+
-+#include "std_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         gen_id  General Drivers Utilities
-+
-+ @Description   General usage API. This API is intended for usage by both the
-+                internal modules and the user's application.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         endian_id Big/Little-Endian Conversion
-+
-+ @Description   Routines and macros for Big/Little-Endian conversion and
-+                general byte swapping.
-+
-+                All routines and macros are expecting unsigned values as
-+                parameters, but will generate the correct result also for
-+                signed values. Therefore, signed/unsigned casting is allowed.
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Collection    Byte-Swap Macros
-+
-+                Macros for swapping byte order.
-+
-+ @Cautions      The parameters of these macros are evaluated multiple times.
-+                For calculated expressions or expressions that contain function
-+                calls it is recommended to use the byte-swap routines.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   Swaps the byte order of a given 16-bit value.
-+
-+ @Param[in]     val - The 16-bit value to swap.
-+
-+ @Return        The byte-swapped value..
-+
-+ @Cautions      The given value is evaluated multiple times by this macro.
-+                For calculated expressions or expressions that contain function
-+                calls it is recommended to use the SwapUint16() routine.
-+
-+ @hideinitializer
-+*//***************************************************************************/
-+#define SWAP_UINT16(val) \
-+    ((uint16_t)((((val) & 0x00FF) << 8) | (((val) & 0xFF00) >> 8)))
-+
-+/**************************************************************************//**
-+ @Description   Swaps the byte order of a given 32-bit value.
-+
-+ @Param[in]     val - The 32-bit value to swap.
-+
-+ @Return        The byte-swapped value..
-+
-+ @Cautions      The given value is evaluated multiple times by this macro.
-+                For calculated expressions or expressions that contain function
-+                calls it is recommended to use the SwapUint32() routine.
-+
-+ @hideinitializer
-+*//***************************************************************************/
-+#define SWAP_UINT32(val) \
-+    ((uint32_t)((((val) & 0x000000FF) << 24) | \
-+                (((val) & 0x0000FF00) <<  8) | \
-+                (((val) & 0x00FF0000) >>  8) | \
-+                (((val) & 0xFF000000) >> 24)))
-+
-+/**************************************************************************//**
-+ @Description   Swaps the byte order of a given 64-bit value.
-+
-+ @Param[in]     val - The 64-bit value to swap.
-+
-+ @Return        The byte-swapped value..
-+
-+ @Cautions      The given value is evaluated multiple times by this macro.
-+                For calculated expressions or expressions that contain function
-+                calls it is recommended to use the SwapUint64() routine.
-+
-+ @hideinitializer
-+*//***************************************************************************/
-+#define SWAP_UINT64(val) \
-+    ((uint64_t)((((val) & 0x00000000000000FFULL) << 56) | \
-+                (((val) & 0x000000000000FF00ULL) << 40) | \
-+                (((val) & 0x0000000000FF0000ULL) << 24) | \
-+                (((val) & 0x00000000FF000000ULL) <<  8) | \
-+                (((val) & 0x000000FF00000000ULL) >>  8) | \
-+                (((val) & 0x0000FF0000000000ULL) >> 24) | \
-+                (((val) & 0x00FF000000000000ULL) >> 40) | \
-+                (((val) & 0xFF00000000000000ULL) >> 56)))
-+
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Collection    Byte-Swap Routines
-+
-+                Routines for swapping the byte order of a given parameter and
-+                returning the swapped value.
-+
-+                These inline routines are safer than the byte-swap macros,
-+                because they evaluate the parameter expression only once.
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      SwapUint16
-+
-+ @Description   Returns the byte-swapped value of a given 16-bit value.
-+
-+ @Param[in]     val - The 16-bit value.
-+
-+ @Return        The byte-swapped value of the parameter.
-+*//***************************************************************************/
-+static __inline__ uint16_t SwapUint16(uint16_t val)
-+{
-+    return (uint16_t)(((val & 0x00FF) << 8) |
-+                      ((val & 0xFF00) >> 8));
-+}
-+
-+/**************************************************************************//**
-+ @Function      SwapUint32
-+
-+ @Description   Returns the byte-swapped value of a given 32-bit value.
-+
-+ @Param[in]     val - The 32-bit value.
-+
-+ @Return        The byte-swapped value of the parameter.
-+*//***************************************************************************/
-+static __inline__ uint32_t SwapUint32(uint32_t val)
-+{
-+    return (uint32_t)(((val & 0x000000FF) << 24) |
-+                      ((val & 0x0000FF00) <<  8) |
-+                      ((val & 0x00FF0000) >>  8) |
-+                      ((val & 0xFF000000) >> 24));
-+}
-+
-+/**************************************************************************//**
-+ @Function      SwapUint64
-+
-+ @Description   Returns the byte-swapped value of a given 64-bit value.
-+
-+ @Param[in]     val - The 64-bit value.
-+
-+ @Return        The byte-swapped value of the parameter.
-+*//***************************************************************************/
-+static __inline__ uint64_t SwapUint64(uint64_t val)
-+{
-+    return (uint64_t)(((val & 0x00000000000000FFULL) << 56) |
-+                      ((val & 0x000000000000FF00ULL) << 40) |
-+                      ((val & 0x0000000000FF0000ULL) << 24) |
-+                      ((val & 0x00000000FF000000ULL) <<  8) |
-+                      ((val & 0x000000FF00000000ULL) >>  8) |
-+                      ((val & 0x0000FF0000000000ULL) >> 24) |
-+                      ((val & 0x00FF000000000000ULL) >> 40) |
-+                      ((val & 0xFF00000000000000ULL) >> 56));
-+}
-+
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Collection    In-place Byte-Swap-And-Set Routines
-+
-+                Routines for swapping the byte order of a given variable and
-+                setting the swapped value back to the same variable.
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      SwapUint16P
-+
-+ @Description   Swaps the byte order of a given 16-bit variable.
-+
-+ @Param[in]     p_Val - Pointer to the 16-bit variable.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+static __inline__ void SwapUint16P(uint16_t *p_Val)
-+{
-+    *p_Val = SwapUint16(*p_Val);
-+}
-+
-+/**************************************************************************//**
-+ @Function      SwapUint32P
-+
-+ @Description   Swaps the byte order of a given 32-bit variable.
-+
-+ @Param[in]     p_Val - Pointer to the 32-bit variable.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+static __inline__ void SwapUint32P(uint32_t *p_Val)
-+{
-+    *p_Val = SwapUint32(*p_Val);
-+}
-+
-+/**************************************************************************//**
-+ @Function      SwapUint64P
-+
-+ @Description   Swaps the byte order of a given 64-bit variable.
-+
-+ @Param[in]     p_Val - Pointer to the 64-bit variable.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+static __inline__ void SwapUint64P(uint64_t *p_Val)
-+{
-+    *p_Val = SwapUint64(*p_Val);
-+}
-+
-+/* @} */
-+
-+
-+/**************************************************************************//**
-+ @Collection    Little-Endian Conversion Macros
-+
-+                These macros convert given parameters to or from Little-Endian
-+                format. Use these macros when you want to read or write a specific
-+                Little-Endian value in memory, without a-priori knowing the CPU
-+                byte order.
-+
-+                These macros use the byte-swap routines. For conversion of
-+                constants in initialization structures, you may use the CONST
-+                versions of these macros (see below), which are using the
-+                byte-swap macros instead.
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   Converts a given 16-bit value from CPU byte order to
-+                Little-Endian byte order.
-+
-+ @Param[in]     val - The 16-bit value to convert.
-+
-+ @Return        The converted value.
-+
-+ @hideinitializer
-+*//***************************************************************************/
-+#define CPU_TO_LE16(val)        SwapUint16(val)
-+
-+/**************************************************************************//**
-+ @Description   Converts a given 32-bit value from CPU byte order to
-+                Little-Endian byte order.
-+
-+ @Param[in]     val - The 32-bit value to convert.
-+
-+ @Return        The converted value.
-+
-+ @hideinitializer
-+*//***************************************************************************/
-+#define CPU_TO_LE32(val)        SwapUint32(val)
-+
-+/**************************************************************************//**
-+ @Description   Converts a given 64-bit value from CPU byte order to
-+                Little-Endian byte order.
-+
-+ @Param[in]     val - The 64-bit value to convert.
-+
-+ @Return        The converted value.
-+
-+ @hideinitializer
-+*//***************************************************************************/
-+#define CPU_TO_LE64(val)        SwapUint64(val)
-+
-+
-+/**************************************************************************//**
-+ @Description   Converts a given 16-bit value from Little-Endian byte order to
-+                CPU byte order.
-+
-+ @Param[in]     val - The 16-bit value to convert.
-+
-+ @Return        The converted value.
-+
-+ @hideinitializer
-+*//***************************************************************************/
-+#define LE16_TO_CPU(val)        CPU_TO_LE16(val)
-+
-+/**************************************************************************//**
-+ @Description   Converts a given 32-bit value from Little-Endian byte order to
-+                CPU byte order.
-+
-+ @Param[in]     val - The 32-bit value to convert.
-+
-+ @Return        The converted value.
-+
-+ @hideinitializer
-+*//***************************************************************************/
-+#define LE32_TO_CPU(val)        CPU_TO_LE32(val)
-+
-+/**************************************************************************//**
-+ @Description   Converts a given 64-bit value from Little-Endian byte order to
-+                CPU byte order.
-+
-+ @Param[in]     val - The 64-bit value to convert.
-+
-+ @Return        The converted value.
-+
-+ @hideinitializer
-+*//***************************************************************************/
-+#define LE64_TO_CPU(val)        CPU_TO_LE64(val)
-+
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Collection    Little-Endian Constant Conversion Macros
-+
-+                These macros convert given constants to or from Little-Endian
-+                format. Use these macros when you want to read or write a specific
-+                Little-Endian constant in memory, without a-priori knowing the
-+                CPU byte order.
-+
-+                These macros use the byte-swap macros, therefore can be used for
-+                conversion of constants in initialization structures.
-+
-+ @Cautions      The parameters of these macros are evaluated multiple times.
-+                For non-constant expressions, use the non-CONST macro versions.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   Converts a given 16-bit constant from CPU byte order to
-+                Little-Endian byte order.
-+
-+ @Param[in]     val - The 16-bit value to convert.
-+
-+ @Return        The converted value.
-+
-+ @hideinitializer
-+*//***************************************************************************/
-+#define CONST_CPU_TO_LE16(val)  SWAP_UINT16(val)
-+
-+/**************************************************************************//**
-+ @Description   Converts a given 32-bit constant from CPU byte order to
-+                Little-Endian byte order.
-+
-+ @Param[in]     val - The 32-bit value to convert.
-+
-+ @Return        The converted value.
-+
-+ @hideinitializer
-+*//***************************************************************************/
-+#define CONST_CPU_TO_LE32(val)  SWAP_UINT32(val)
-+
-+/**************************************************************************//**
-+ @Description   Converts a given 64-bit constant from CPU byte order to
-+                Little-Endian byte order.
-+
-+ @Param[in]     val - The 64-bit value to convert.
-+
-+ @Return        The converted value.
-+
-+ @hideinitializer
-+*//***************************************************************************/
-+#define CONST_CPU_TO_LE64(val)  SWAP_UINT64(val)
-+
-+
-+/**************************************************************************//**
-+ @Description   Converts a given 16-bit constant from Little-Endian byte order
-+                to CPU byte order.
-+
-+ @Param[in]     val - The 16-bit value to convert.
-+
-+ @Return        The converted value.
-+
-+ @hideinitializer
-+*//***************************************************************************/
-+#define CONST_LE16_TO_CPU(val)  CONST_CPU_TO_LE16(val)
-+
-+/**************************************************************************//**
-+ @Description   Converts a given 32-bit constant from Little-Endian byte order
-+                to CPU byte order.
-+
-+ @Param[in]     val - The 32-bit value to convert.
-+
-+ @Return        The converted value.
-+
-+ @hideinitializer
-+*//***************************************************************************/
-+#define CONST_LE32_TO_CPU(val)  CONST_CPU_TO_LE32(val)
-+
-+/**************************************************************************//**
-+ @Description   Converts a given 64-bit constant from Little-Endian byte order
-+                to CPU byte order.
-+
-+ @Param[in]     val - The 64-bit value to convert.
-+
-+ @Return        The converted value.
-+
-+ @hideinitializer
-+*//***************************************************************************/
-+#define CONST_LE64_TO_CPU(val)  CONST_CPU_TO_LE64(val)
-+
-+/* @} */
-+
-+
-+/** @} */ /* end of endian_id group */
-+/** @} */ /* end of gen_id group */
-+
-+
-+#endif /* __ENDIAN_EXT_H */
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/enet_ext.h
-@@ -0,0 +1,205 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          enet_ext.h
-+
-+ @Description   Ethernet generic definitions and enums.
-+*//***************************************************************************/
-+
-+#ifndef __ENET_EXT_H
-+#define __ENET_EXT_H
-+
-+#include "fsl_enet.h"
-+
-+#define ENET_NUM_OCTETS_PER_ADDRESS 6     /**< Number of octets (8-bit bytes) in an ethernet address */
-+#define ENET_GROUP_ADDR             0x01  /**< Group address mask for ethernet addresses */
-+
-+
-+/**************************************************************************//**
-+ @Description   Ethernet Address
-+*//***************************************************************************/
-+typedef uint8_t t_EnetAddr[ENET_NUM_OCTETS_PER_ADDRESS];
-+
-+/**************************************************************************//**
-+ @Description   Ethernet Address Type.
-+*//***************************************************************************/
-+typedef enum e_EnetAddrType
-+{
-+    e_ENET_ADDR_TYPE_INDIVIDUAL,    /**< Individual (unicast) address */
-+    e_ENET_ADDR_TYPE_GROUP,         /**< Group (multicast) address */
-+    e_ENET_ADDR_TYPE_BROADCAST      /**< Broadcast address */
-+} e_EnetAddrType;
-+
-+/**************************************************************************//**
-+ @Description   Ethernet MAC-PHY Interface
-+*//***************************************************************************/
-+typedef enum e_EnetInterface
-+{
-+    e_ENET_IF_MII   = E_ENET_IF_MII,     /**< MII interface */
-+    e_ENET_IF_RMII  = E_ENET_IF_RMII,    /**< RMII interface */
-+    e_ENET_IF_SMII  = E_ENET_IF_SMII,    /**< SMII interface */
-+    e_ENET_IF_GMII  = E_ENET_IF_GMII,    /**< GMII interface */
-+    e_ENET_IF_RGMII = E_ENET_IF_RGMII,   /**< RGMII interface */
-+    e_ENET_IF_TBI   = E_ENET_IF_TBI,     /**< TBI interface */
-+    e_ENET_IF_RTBI  = E_ENET_IF_RTBI,    /**< RTBI interface */
-+    e_ENET_IF_SGMII = E_ENET_IF_SGMII,   /**< SGMII interface */
-+    e_ENET_IF_XGMII = E_ENET_IF_XGMII,   /**< XGMII interface */
-+    e_ENET_IF_QSGMII= E_ENET_IF_QSGMII,  /**< QSGMII interface */
-+    e_ENET_IF_XFI   = E_ENET_IF_XFI      /**< XFI interface */
-+} e_EnetInterface;
-+
-+#define ENET_IF_SGMII_BASEX       0x80000000   /**< SGMII/QSGII interface with 1000BaseX
-+                                                    auto-negotiation between MAC and phy
-+                                                    or backplane;
-+                                                    Note: 1000BaseX auto-negotiation relates
-+                                                    only to interface between MAC and phy/backplane,
-+                                                    SGMII phy can still synchronize with far-end phy
-+                                                    at 10Mbps, 100Mbps or 1000Mbps */
-+
-+/**************************************************************************//**
-+ @Description   Ethernet Duplex Mode
-+*//***************************************************************************/
-+typedef enum e_EnetDuplexMode
-+{
-+    e_ENET_HALF_DUPLEX,             /**< Half-Duplex mode */
-+    e_ENET_FULL_DUPLEX              /**< Full-Duplex mode */
-+} e_EnetDuplexMode;
-+
-+/**************************************************************************//**
-+ @Description   Ethernet Speed (nominal data rate)
-+*//***************************************************************************/
-+typedef enum e_EnetSpeed
-+{
-+    e_ENET_SPEED_10     = E_ENET_SPEED_10,       /**< 10 Mbps */
-+    e_ENET_SPEED_100    = E_ENET_SPEED_100,      /**< 100 Mbps */
-+    e_ENET_SPEED_1000   = E_ENET_SPEED_1000,     /**< 1000 Mbps = 1 Gbps */
-+    e_ENET_SPEED_2500   = E_ENET_SPEED_2500,     /**< 2500 Mbps = 2.5 Gbps */
-+    e_ENET_SPEED_10000  = E_ENET_SPEED_10000     /**< 10000 Mbps = 10 Gbps */
-+} e_EnetSpeed;
-+
-+/**************************************************************************//**
-+ @Description   Ethernet mode (combination of MAC-PHY interface and speed)
-+*//***************************************************************************/
-+typedef enum e_EnetMode
-+{
-+    e_ENET_MODE_INVALID           = 0,                                        /**< Invalid Ethernet mode */
-+    e_ENET_MODE_MII_10            = (e_ENET_IF_MII   | e_ENET_SPEED_10),      /**<    10 Mbps MII   */
-+    e_ENET_MODE_MII_100           = (e_ENET_IF_MII   | e_ENET_SPEED_100),     /**<   100 Mbps MII   */
-+    e_ENET_MODE_RMII_10           = (e_ENET_IF_RMII  | e_ENET_SPEED_10),      /**<    10 Mbps RMII  */
-+    e_ENET_MODE_RMII_100          = (e_ENET_IF_RMII  | e_ENET_SPEED_100),     /**<   100 Mbps RMII  */
-+    e_ENET_MODE_SMII_10           = (e_ENET_IF_SMII  | e_ENET_SPEED_10),      /**<    10 Mbps SMII  */
-+    e_ENET_MODE_SMII_100          = (e_ENET_IF_SMII  | e_ENET_SPEED_100),     /**<   100 Mbps SMII  */
-+    e_ENET_MODE_GMII_1000         = (e_ENET_IF_GMII  | e_ENET_SPEED_1000),    /**<  1000 Mbps GMII  */
-+    e_ENET_MODE_RGMII_10          = (e_ENET_IF_RGMII | e_ENET_SPEED_10),      /**<    10 Mbps RGMII */
-+    e_ENET_MODE_RGMII_100         = (e_ENET_IF_RGMII | e_ENET_SPEED_100),     /**<   100 Mbps RGMII */
-+    e_ENET_MODE_RGMII_1000        = (e_ENET_IF_RGMII | e_ENET_SPEED_1000),    /**<  1000 Mbps RGMII */
-+    e_ENET_MODE_TBI_1000          = (e_ENET_IF_TBI   | e_ENET_SPEED_1000),    /**<  1000 Mbps TBI   */
-+    e_ENET_MODE_RTBI_1000         = (e_ENET_IF_RTBI  | e_ENET_SPEED_1000),    /**<  1000 Mbps RTBI  */
-+    e_ENET_MODE_SGMII_10          = (e_ENET_IF_SGMII | e_ENET_SPEED_10),
-+                                        /**< 10 Mbps SGMII with auto-negotiation between MAC and
-+                                             SGMII phy according to Cisco SGMII specification */
-+    e_ENET_MODE_SGMII_100         = (e_ENET_IF_SGMII | e_ENET_SPEED_100),
-+                                        /**< 100 Mbps SGMII with auto-negotiation between MAC and
-+                                             SGMII phy according to Cisco SGMII specification */
-+    e_ENET_MODE_SGMII_1000        = (e_ENET_IF_SGMII | e_ENET_SPEED_1000),
-+                                        /**< 1000 Mbps SGMII with auto-negotiation between MAC and
-+                                             SGMII phy according to Cisco SGMII specification */
-+    e_ENET_MODE_SGMII_2500        = (e_ENET_IF_SGMII | e_ENET_SPEED_2500),
-+    e_ENET_MODE_SGMII_BASEX_10    = (ENET_IF_SGMII_BASEX | e_ENET_IF_SGMII | e_ENET_SPEED_10),
-+                                        /**< 10 Mbps SGMII with 1000BaseX auto-negotiation between
-+                                             MAC and SGMII phy or backplane */
-+    e_ENET_MODE_SGMII_BASEX_100   = (ENET_IF_SGMII_BASEX | e_ENET_IF_SGMII | e_ENET_SPEED_100),
-+                                        /**< 100 Mbps SGMII with 1000BaseX auto-negotiation between
-+                                             MAC and SGMII phy or backplane */
-+    e_ENET_MODE_SGMII_BASEX_1000  = (ENET_IF_SGMII_BASEX | e_ENET_IF_SGMII | e_ENET_SPEED_1000),
-+                                        /**< 1000 Mbps SGMII with 1000BaseX auto-negotiation between
-+                                             MAC and SGMII phy or backplane */
-+    e_ENET_MODE_QSGMII_1000       = (e_ENET_IF_QSGMII| e_ENET_SPEED_1000),
-+                                        /**< 1000 Mbps QSGMII with auto-negotiation between MAC and
-+                                             QSGMII phy according to Cisco QSGMII specification */
-+    e_ENET_MODE_QSGMII_BASEX_1000 = (ENET_IF_SGMII_BASEX | e_ENET_IF_QSGMII| e_ENET_SPEED_1000),
-+                                        /**< 1000 Mbps QSGMII with 1000BaseX auto-negotiation between
-+                                             MAC and QSGMII phy or backplane */
-+    e_ENET_MODE_XGMII_10000       = (e_ENET_IF_XGMII | e_ENET_SPEED_10000),   /**< 10000 Mbps XGMII */
-+    e_ENET_MODE_XFI_10000         = (e_ENET_IF_XFI   | e_ENET_SPEED_10000)    /**< 10000 Mbps XFI */
-+} e_EnetMode;
-+
-+
-+#define IS_ENET_MODE_VALID(mode) \
-+        (((mode) == e_ENET_MODE_MII_10     ) || \
-+         ((mode) == e_ENET_MODE_MII_100    ) || \
-+         ((mode) == e_ENET_MODE_RMII_10    ) || \
-+         ((mode) == e_ENET_MODE_RMII_100   ) || \
-+         ((mode) == e_ENET_MODE_SMII_10    ) || \
-+         ((mode) == e_ENET_MODE_SMII_100   ) || \
-+         ((mode) == e_ENET_MODE_GMII_1000  ) || \
-+         ((mode) == e_ENET_MODE_RGMII_10   ) || \
-+         ((mode) == e_ENET_MODE_RGMII_100  ) || \
-+         ((mode) == e_ENET_MODE_RGMII_1000 ) || \
-+         ((mode) == e_ENET_MODE_TBI_1000   ) || \
-+         ((mode) == e_ENET_MODE_RTBI_1000  ) || \
-+         ((mode) == e_ENET_MODE_SGMII_10   ) || \
-+         ((mode) == e_ENET_MODE_SGMII_100  ) || \
-+         ((mode) == e_ENET_MODE_SGMII_1000 ) || \
-+         ((mode) == e_ENET_MODE_SGMII_BASEX_10   ) || \
-+         ((mode) == e_ENET_MODE_SGMII_BASEX_100  ) || \
-+         ((mode) == e_ENET_MODE_SGMII_BASEX_1000 ) || \
-+         ((mode) == e_ENET_MODE_XGMII_10000) || \
-+         ((mode) == e_ENET_MODE_QSGMII_1000) || \
-+         ((mode) == e_ENET_MODE_QSGMII_BASEX_1000) || \
-+         ((mode) == e_ENET_MODE_XFI_10000))
-+
-+
-+#define MAKE_ENET_MODE(_interface, _speed)     (e_EnetMode)((_interface) | (_speed))
-+
-+#define ENET_INTERFACE_FROM_MODE(mode)          (e_EnetInterface)((mode) & 0x0FFF0000)
-+#define ENET_SPEED_FROM_MODE(mode)              (e_EnetSpeed)((mode) & 0x0000FFFF)
-+
-+#define ENET_ADDR_TO_UINT64(_enetAddr)                  \
-+        (uint64_t)(((uint64_t)(_enetAddr)[0] << 40) |   \
-+                   ((uint64_t)(_enetAddr)[1] << 32) |   \
-+                   ((uint64_t)(_enetAddr)[2] << 24) |   \
-+                   ((uint64_t)(_enetAddr)[3] << 16) |   \
-+                   ((uint64_t)(_enetAddr)[4] << 8) |    \
-+                   ((uint64_t)(_enetAddr)[5]))
-+
-+#define MAKE_ENET_ADDR_FROM_UINT64(_addr64, _enetAddr)              \
-+        do {                                                        \
-+            int i;                                                  \
-+            for (i=0; i < ENET_NUM_OCTETS_PER_ADDRESS; i++)         \
-+                (_enetAddr)[i] = (uint8_t)((_addr64) >> ((5-i)*8)); \
-+        } while (0)
-+
-+
-+#endif /* __ENET_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/error_ext.h
-@@ -0,0 +1,529 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          error_ext.h
-+
-+ @Description   Error definitions.
-+*//***************************************************************************/
-+
-+#ifndef __ERROR_EXT_H
-+#define __ERROR_EXT_H
-+
-+#if !defined(NCSW_LINUX)
-+#include <errno.h>
-+#endif
-+
-+#include "std_ext.h"
-+#include "xx_ext.h"
-+#include "core_ext.h"
-+
-+
-+
-+
-+/**************************************************************************//**
-+ @Group         gen_id  General Drivers Utilities
-+
-+ @Description   External routines.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         gen_error_id  Errors, Events and Debug
-+
-+ @Description   External routines.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/******************************************************************************
-+The scheme below provides the bits description for error codes:
-+
-+ 0    1    2    3    4    5    6    7    8    9    10   11   12   13   14   15
-+|       Reserved (should be zero)      |              Module ID               |
-+
-+ 16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31
-+|                               Error Type                                    |
-+******************************************************************************/
-+
-+#define ERROR_CODE(_err)            ((((uint32_t)_err) & 0x0000FFFF) | __ERR_MODULE__)
-+
-+#define GET_ERROR_TYPE(_errcode)    ((_errcode) & 0x0000FFFF)
-+                                /**< Extract module code from error code (#t_Error) */
-+
-+#define GET_ERROR_MODULE(_errcode)  ((_errcode) & 0x00FF0000)
-+                                /**< Extract error type (#e_ErrorType) from
-+                                     error code (#t_Error) */
-+
-+
-+/**************************************************************************//**
-+ @Description    Error Type Enumeration
-+*//***************************************************************************/
-+typedef enum e_ErrorType    /*   Comments / Associated Message Strings                      */
-+{                           /* ------------------------------------------------------------ */
-+    E_OK = 0                /*   Never use "RETURN_ERROR" with E_OK; Use "return E_OK;"     */
-+    ,E_WRITE_FAILED = EIO   /**< Write access failed on memory/device.                      */
-+                            /*   String: none, or device name.                              */
-+    ,E_NO_DEVICE = ENXIO    /**< The associated device is not initialized.                  */
-+                            /*   String: none.                                              */
-+    ,E_NOT_AVAILABLE = EAGAIN
-+                            /**< Resource is unavailable.                                   */
-+                            /*   String: none, unless the operation is not the main goal
-+                                 of the function (in this case add resource description).   */
-+    ,E_NO_MEMORY = ENOMEM   /**< External memory allocation failed.                         */
-+                            /*   String: description of item for which allocation failed.   */
-+    ,E_INVALID_ADDRESS = EFAULT
-+                            /**< Invalid address.                                           */
-+                            /*   String: description of the specific violation.             */
-+    ,E_BUSY = EBUSY         /**< Resource or module is busy.                                */
-+                            /*   String: none, unless the operation is not the main goal
-+                                 of the function (in this case add resource description).   */
-+    ,E_ALREADY_EXISTS = EEXIST
-+                            /**< Requested resource or item already exists.                 */
-+                            /*   Use when resource duplication or sharing are not allowed.
-+                                 String: none, unless the operation is not the main goal
-+                                 of the function (in this case add item description).       */
-+    ,E_INVALID_OPERATION = ENODEV
-+                            /**< The operation/command is invalid (unrecognized).           */
-+                            /*   String: none.                                              */
-+    ,E_INVALID_VALUE = EDOM /**< Invalid value.                                             */
-+                            /*   Use for non-enumeration parameters, and
-+                                 only when other error types are not suitable.
-+                                 String: parameter description + "(should be <attribute>)",
-+                                 e.g: "Maximum Rx buffer length (should be divisible by 8)",
-+                                      "Channel number (should be even)".                    */
-+    ,E_NOT_IN_RANGE = ERANGE/**< Parameter value is out of range.                           */
-+                            /*   Don't use this error for enumeration parameters.
-+                                 String: parameter description + "(should be %d-%d)",
-+                                 e.g: "Number of pad characters (should be 0-15)".          */
-+    ,E_NOT_SUPPORTED = ENOSYS
-+                            /**< The function is not supported or not implemented.          */
-+                            /*   String: none.                                              */
-+    ,E_INVALID_STATE        /**< The operation is not allowed in current module state.      */
-+                            /*   String: none.                                              */
-+    ,E_INVALID_HANDLE       /**< Invalid handle of module or object.                        */
-+                            /*   String: none, unless the function takes in more than one
-+                                 handle (in this case add the handle description)           */
-+    ,E_INVALID_ID           /**< Invalid module ID (usually enumeration or index).          */
-+                            /*   String: none, unless the function takes in more than one
-+                                 ID (in this case add the ID description)                   */
-+    ,E_NULL_POINTER         /**< Unexpected NULL pointer.                                   */
-+                            /*   String: pointer description.                               */
-+    ,E_INVALID_SELECTION    /**< Invalid selection or mode.                                 */
-+                            /*   Use for enumeration values, only when other error types
-+                                 are not suitable.
-+                                 String: parameter description.                             */
-+    ,E_INVALID_COMM_MODE    /**< Invalid communication mode.                                */
-+                            /*   String: none, unless the function takes in more than one
-+                                 communication mode indications (in this case add
-+                                 parameter description).                                    */
-+    ,E_INVALID_MEMORY_TYPE  /**< Invalid memory type.                                       */
-+                            /*   String: none, unless the function takes in more than one
-+                                 memory types (in this case add memory description,
-+                                 e.g: "Data memory", "Buffer descriptors memory").          */
-+    ,E_INVALID_CLOCK        /**< Invalid clock.                                             */
-+                            /*   String: none, unless the function takes in more than one
-+                                 clocks (in this case add clock description,
-+                                 e.g: "Rx clock", "Tx clock").                              */
-+    ,E_CONFLICT             /**< Some setting conflicts with another setting.               */
-+                            /*   String: description of the conflicting settings.           */
-+    ,E_NOT_ALIGNED          /**< Non-aligned address.                                       */
-+                            /*   String: parameter description + "(should be %d-bytes aligned)",
-+                                 e.g: "Rx data buffer (should be 32-bytes aligned)".        */
-+    ,E_NOT_FOUND            /**< Requested resource or item was not found.                  */
-+                            /*   Use only when the resource/item is uniquely identified.
-+                                 String: none, unless the operation is not the main goal
-+                                 of the function (in this case add item description).       */
-+    ,E_FULL                 /**< Resource is full.                                          */
-+                            /*   String: none, unless the operation is not the main goal
-+                                 of the function (in this case add resource description).   */
-+    ,E_EMPTY                /**< Resource is empty.                                         */
-+                            /*   String: none, unless the operation is not the main goal
-+                                 of the function (in this case add resource description).   */
-+    ,E_ALREADY_FREE         /**< Specified resource or item is already free or deleted.     */
-+                            /*   String: none, unless the operation is not the main goal
-+                                 of the function (in this case add item description).       */
-+    ,E_READ_FAILED          /**< Read access failed on memory/device.                       */
-+                            /*   String: none, or device name.                              */
-+    ,E_INVALID_FRAME        /**< Invalid frame object (NULL handle or missing buffers).     */
-+                            /*   String: none.                                              */
-+    ,E_SEND_FAILED          /**< Send operation failed on device.                           */
-+                            /*   String: none, or device name.                              */
-+    ,E_RECEIVE_FAILED       /**< Receive operation failed on device.                        */
-+                            /*   String: none, or device name.                              */
-+    ,E_TIMEOUT/* = ETIMEDOUT*/  /**< The operation timed out.                                   */
-+                            /*   String: none.                                              */
-+
-+    ,E_DUMMY_LAST           /* NEVER USED */
-+
-+} e_ErrorType;
-+
-+/**************************************************************************//**
-+ @Description    Event Type Enumeration
-+*//***************************************************************************/
-+typedef enum e_Event        /*   Comments / Associated Flags and Message Strings            */
-+{                           /* ------------------------------------------------------------ */
-+    EV_NO_EVENT = 0         /**< No event; Never used.                                      */
-+
-+    ,EV_RX_DISCARD          /**< Received packet discarded (by the driver, and only for
-+                                 complete packets);
-+                                 Flags: error flags in case of error, zero otherwise.       */
-+                            /*   String: reason for discard, e.g: "Error in frame",
-+                                 "Disordered frame", "Incomplete frame", "No frame object". */
-+    ,EV_RX_ERROR            /**< Receive error (by hardware/firmware);
-+                                 Flags: usually status flags from the buffer descriptor.    */
-+                            /*   String: none.                                              */
-+    ,EV_TX_ERROR            /**< Transmit error (by hardware/firmware);
-+                                 Flags: usually status flags from the buffer descriptor.    */
-+                            /*   String: none.                                              */
-+    ,EV_NO_BUFFERS          /**< System ran out of buffer objects;
-+                                 Flags: zero.                                               */
-+                            /*   String: none.                                              */
-+    ,EV_NO_MB_FRAMES        /**< System ran out of multi-buffer frame objects;
-+                                 Flags: zero.                                               */
-+                            /*   String: none.                                              */
-+    ,EV_NO_SB_FRAMES        /**< System ran out of single-buffer frame objects;
-+                                 Flags: zero.                                               */
-+                            /*   String: none.                                              */
-+    ,EV_TX_QUEUE_FULL       /**< Transmit queue is full;
-+                                 Flags: zero.                                               */
-+                            /*   String: none.                                              */
-+    ,EV_RX_QUEUE_FULL       /**< Receive queue is full;
-+                                 Flags: zero.                                               */
-+                            /*   String: none.                                              */
-+    ,EV_INTR_QUEUE_FULL     /**< Interrupt queue overflow;
-+                                 Flags: zero.                                               */
-+                            /*   String: none.                                              */
-+    ,EV_NO_DATA_BUFFER      /**< Data buffer allocation (from higher layer) failed;
-+                                 Flags: zero.                                               */
-+                            /*   String: none.                                              */
-+    ,EV_OBJ_POOL_EMPTY      /**< Objects pool is empty;
-+                                 Flags: zero.                                               */
-+                            /*   String: object description (name).                         */
-+    ,EV_BUS_ERROR           /**< Illegal access on bus;
-+                                 Flags: the address (if available) or bus identifier        */
-+                            /*   String: bus/address/module description.                    */
-+    ,EV_PTP_TXTS_QUEUE_FULL /**< PTP Tx timestamps queue is full;
-+                                 Flags: zero.                                               */
-+                            /*   String: none.                                              */
-+    ,EV_PTP_RXTS_QUEUE_FULL /**< PTP Rx timestamps queue is full;
-+                                 Flags: zero.                                               */
-+                            /*   String: none.                                              */
-+    ,EV_DUMMY_LAST
-+
-+} e_Event;
-+
-+
-+/**************************************************************************//**
-+ @Collection    Debug Levels for Errors and Events
-+
-+                The level description refers to errors only.
-+                For events, classification is done by the user.
-+
-+                The TRACE, INFO and WARNING levels are allowed only when using
-+                the DBG macro, and are not allowed when using the error macros
-+                (RETURN_ERROR or REPORT_ERROR).
-+ @{
-+*//***************************************************************************/
-+#define REPORT_LEVEL_CRITICAL   1       /**< Crasher: Incorrect flow, NULL pointers/handles. */
-+#define REPORT_LEVEL_MAJOR      2       /**< Cannot proceed: Invalid operation, parameters or
-+                                             configuration. */
-+#define REPORT_LEVEL_MINOR      3       /**< Recoverable problem: a repeating call with the same
-+                                             parameters may be successful. */
-+#define REPORT_LEVEL_WARNING    4       /**< Something is not exactly right, yet it is not an error. */
-+#define REPORT_LEVEL_INFO       5       /**< Messages which may be of interest to user/programmer. */
-+#define REPORT_LEVEL_TRACE      6       /**< Program flow messages. */
-+
-+#define EVENT_DISABLED          0xFF    /**< Disabled event (not reported at all) */
-+
-+/* @} */
-+
-+
-+
-+#define NO_MSG      ("")
-+
-+#ifndef DEBUG_GLOBAL_LEVEL
-+#define DEBUG_GLOBAL_LEVEL  REPORT_LEVEL_WARNING
-+#endif /* DEBUG_GLOBAL_LEVEL */
-+
-+#ifndef ERROR_GLOBAL_LEVEL
-+#define ERROR_GLOBAL_LEVEL  DEBUG_GLOBAL_LEVEL
-+#endif /* ERROR_GLOBAL_LEVEL */
-+
-+#ifndef EVENT_GLOBAL_LEVEL
-+#define EVENT_GLOBAL_LEVEL  REPORT_LEVEL_MINOR
-+#endif /* EVENT_GLOBAL_LEVEL */
-+
-+#ifdef EVENT_LOCAL_LEVEL
-+#define EVENT_DYNAMIC_LEVEL EVENT_LOCAL_LEVEL
-+#else
-+#define EVENT_DYNAMIC_LEVEL EVENT_GLOBAL_LEVEL
-+#endif /* EVENT_LOCAL_LEVEL */
-+
-+
-+#ifndef DEBUG_DYNAMIC_LEVEL
-+#define DEBUG_USING_STATIC_LEVEL
-+
-+#ifdef DEBUG_STATIC_LEVEL
-+#define DEBUG_DYNAMIC_LEVEL DEBUG_STATIC_LEVEL
-+#else
-+#define DEBUG_DYNAMIC_LEVEL DEBUG_GLOBAL_LEVEL
-+#endif /* DEBUG_STATIC_LEVEL */
-+
-+#else /* DEBUG_DYNAMIC_LEVEL */
-+#ifdef DEBUG_STATIC_LEVEL
-+#error "Please use either DEBUG_STATIC_LEVEL or DEBUG_DYNAMIC_LEVEL (not both)"
-+#else
-+int DEBUG_DYNAMIC_LEVEL = DEBUG_GLOBAL_LEVEL;
-+#endif /* DEBUG_STATIC_LEVEL */
-+#endif /* !DEBUG_DYNAMIC_LEVEL */
-+
-+
-+#ifndef ERROR_DYNAMIC_LEVEL
-+
-+#ifdef ERROR_STATIC_LEVEL
-+#define ERROR_DYNAMIC_LEVEL ERROR_STATIC_LEVEL
-+#else
-+#define ERROR_DYNAMIC_LEVEL ERROR_GLOBAL_LEVEL
-+#endif /* ERROR_STATIC_LEVEL */
-+
-+#else /* ERROR_DYNAMIC_LEVEL */
-+#ifdef ERROR_STATIC_LEVEL
-+#error "Please use either ERROR_STATIC_LEVEL or ERROR_DYNAMIC_LEVEL (not both)"
-+#else
-+int ERROR_DYNAMIC_LEVEL = ERROR_GLOBAL_LEVEL;
-+#endif /* ERROR_STATIC_LEVEL */
-+#endif /* !ERROR_DYNAMIC_LEVEL */
-+
-+#define PRINT_FORMAT        "[CPU%02d, %s:%d %s]"
-+#define PRINT_FMT_PARAMS    raw_smp_processor_id(), __FILE__, __LINE__, __FUNCTION__
-+
-+#if (!(defined(DEBUG_ERRORS)) || (DEBUG_ERRORS == 0))
-+/* No debug/error/event messages at all */
-+#define DBG(_level, _vmsg)
-+
-+#define REPORT_ERROR(_level, _err, _vmsg)
-+
-+#define RETURN_ERROR(_level, _err, _vmsg) \
-+        return ERROR_CODE(_err)
-+
-+#if (REPORT_EVENTS > 0)
-+
-+#define REPORT_EVENT(_ev, _appId, _flg, _vmsg) \
-+    do { \
-+        if (_ev##_LEVEL <= EVENT_DYNAMIC_LEVEL) { \
-+            XX_EventById((uint32_t)(_ev), (t_Handle)(_appId), (uint16_t)(_flg), NO_MSG); \
-+        } \
-+    } while (0)
-+
-+#else
-+
-+#define REPORT_EVENT(_ev, _appId, _flg, _vmsg)
-+
-+#endif /* (REPORT_EVENTS > 0) */
-+
-+
-+#else /* DEBUG_ERRORS > 0 */
-+
-+extern const char *dbgLevelStrings[];
-+extern const char *moduleStrings[];
-+#if (REPORT_EVENTS > 0)
-+extern const char *eventStrings[];
-+#endif /* (REPORT_EVENTS > 0) */
-+
-+char * ErrTypeStrings (e_ErrorType err);
-+
-+
-+#if ((defined(DEBUG_USING_STATIC_LEVEL)) && (DEBUG_DYNAMIC_LEVEL < REPORT_LEVEL_WARNING))
-+/* No need for DBG macro - debug level is higher anyway */
-+#define DBG(_level, _vmsg)
-+#else
-+#define DBG(_level, _vmsg) \
-+    do { \
-+        if (REPORT_LEVEL_##_level <= DEBUG_DYNAMIC_LEVEL) { \
-+            XX_Print("> %s (%s) " PRINT_FORMAT ": ", \
-+                     dbgLevelStrings[REPORT_LEVEL_##_level - 1], \
-+                     moduleStrings[__ERR_MODULE__ >> 16], \
-+                     PRINT_FMT_PARAMS); \
-+            XX_Print _vmsg; \
-+            XX_Print("\r\n"); \
-+        } \
-+    } while (0)
-+#endif /* (defined(DEBUG_USING_STATIC_LEVEL) && (DEBUG_DYNAMIC_LEVEL < WARNING)) */
-+
-+
-+#define REPORT_ERROR(_level, _err, _vmsg) \
-+    do { \
-+        if (REPORT_LEVEL_##_level <= ERROR_DYNAMIC_LEVEL) { \
-+            XX_Print("! %s %s Error " PRINT_FORMAT ": %s; ", \
-+                     dbgLevelStrings[REPORT_LEVEL_##_level - 1], \
-+                     moduleStrings[__ERR_MODULE__ >> 16], \
-+                     PRINT_FMT_PARAMS, \
-+                     ErrTypeStrings((e_ErrorType)GET_ERROR_TYPE(_err))); \
-+            XX_Print _vmsg; \
-+            XX_Print("\r\n"); \
-+        } \
-+    } while (0)
-+
-+
-+#define RETURN_ERROR(_level, _err, _vmsg) \
-+    do { \
-+        REPORT_ERROR(_level, (_err), _vmsg); \
-+        return ERROR_CODE(_err); \
-+    } while (0)
-+
-+
-+#if (REPORT_EVENTS > 0)
-+
-+#define REPORT_EVENT(_ev, _appId, _flg, _vmsg) \
-+    do { \
-+        if (_ev##_LEVEL <= EVENT_DYNAMIC_LEVEL) { \
-+            XX_Print("~ %s %s Event " PRINT_FORMAT ": %s (flags: 0x%04x); ", \
-+                     dbgLevelStrings[_ev##_LEVEL - 1], \
-+                     moduleStrings[__ERR_MODULE__ >> 16], \
-+                     PRINT_FMT_PARAMS, \
-+                     eventStrings[((_ev) - EV_NO_EVENT - 1)], \
-+                     (uint16_t)(_flg)); \
-+            XX_Print _vmsg; \
-+            XX_Print("\r\n"); \
-+            XX_EventById((uint32_t)(_ev), (t_Handle)(_appId), (uint16_t)(_flg), NO_MSG); \
-+        } \
-+    } while (0)
-+
-+#else /* not REPORT_EVENTS */
-+
-+#define REPORT_EVENT(_ev, _appId, _flg, _vmsg)
-+
-+#endif /* (REPORT_EVENTS > 0) */
-+
-+#endif /* (DEBUG_ERRORS > 0) */
-+
-+
-+/**************************************************************************//**
-+ @Function      ASSERT_COND
-+
-+ @Description   Assertion macro.
-+
-+ @Param[in]     _cond - The condition being checked, in positive form;
-+                        Failure of the condition triggers the assert.
-+*//***************************************************************************/
-+#ifdef DISABLE_ASSERTIONS
-+#define ASSERT_COND(_cond)
-+#else
-+#define ASSERT_COND(_cond) \
-+    do { \
-+        if (!(_cond)) { \
-+            XX_Print("*** ASSERT_COND failed " PRINT_FORMAT "\r\n", \
-+                    PRINT_FMT_PARAMS); \
-+            XX_Exit(1); \
-+        } \
-+    } while (0)
-+#endif /* DISABLE_ASSERTIONS */
-+
-+
-+#ifdef DISABLE_INIT_PARAMETERS_CHECK
-+
-+#define CHECK_INIT_PARAMETERS(handle, f_check)
-+#define CHECK_INIT_PARAMETERS_RETURN_VALUE(handle, f_check, retval)
-+
-+#else
-+
-+#define CHECK_INIT_PARAMETERS(handle, f_check) \
-+    do { \
-+        t_Error err = f_check(handle); \
-+        if (err != E_OK) { \
-+            RETURN_ERROR(MAJOR, err, NO_MSG); \
-+        } \
-+    } while (0)
-+
-+#define CHECK_INIT_PARAMETERS_RETURN_VALUE(handle, f_check, retval) \
-+    do { \
-+        t_Error err = f_check(handle); \
-+        if (err != E_OK) { \
-+            REPORT_ERROR(MAJOR, err, NO_MSG); \
-+            return (retval); \
-+        } \
-+    } while (0)
-+
-+#endif /* DISABLE_INIT_PARAMETERS_CHECK */
-+
-+#ifdef DISABLE_SANITY_CHECKS
-+
-+#define SANITY_CHECK_RETURN_ERROR(_cond, _err)
-+#define SANITY_CHECK_RETURN_VALUE(_cond, _err, retval)
-+#define SANITY_CHECK_RETURN(_cond, _err)
-+#define SANITY_CHECK_EXIT(_cond, _err)
-+
-+#else /* DISABLE_SANITY_CHECKS */
-+
-+#define SANITY_CHECK_RETURN_ERROR(_cond, _err) \
-+    do { \
-+        if (!(_cond)) { \
-+            RETURN_ERROR(CRITICAL, (_err), NO_MSG); \
-+        } \
-+    } while (0)
-+
-+#define SANITY_CHECK_RETURN_VALUE(_cond, _err, retval) \
-+    do { \
-+        if (!(_cond)) { \
-+            REPORT_ERROR(CRITICAL, (_err), NO_MSG); \
-+            return (retval); \
-+        } \
-+    } while (0)
-+
-+#define SANITY_CHECK_RETURN(_cond, _err) \
-+    do { \
-+        if (!(_cond)) { \
-+            REPORT_ERROR(CRITICAL, (_err), NO_MSG); \
-+            return; \
-+        } \
-+    } while (0)
-+
-+#define SANITY_CHECK_EXIT(_cond, _err) \
-+    do { \
-+        if (!(_cond)) { \
-+            REPORT_ERROR(CRITICAL, (_err), NO_MSG); \
-+            XX_Exit(1); \
-+        } \
-+    } while (0)
-+
-+#endif /* DISABLE_SANITY_CHECKS */
-+
-+/** @} */ /* end of Debug/error Utils group */
-+
-+/** @} */ /* end of General Utils group */
-+
-+#endif /* __ERROR_EXT_H */
-+
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/etc/list_ext.h
-@@ -0,0 +1,358 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+
-+ @File          list_ext.h
-+
-+ @Description   External prototypes for list.c
-+*//***************************************************************************/
-+
-+#ifndef __LIST_EXT_H
-+#define __LIST_EXT_H
-+
-+
-+#include "std_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         etc_id   Utility Library Application Programming Interface
-+
-+ @Description   External routines.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         list_id List
-+
-+ @Description   List module functions,definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   List structure.
-+*//***************************************************************************/
-+typedef struct List
-+{
-+    struct List *p_Next;  /**< A pointer to the next list object     */
-+    struct List *p_Prev;  /**< A pointer to the previous list object */
-+} t_List;
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST_FIRST/LIST_LAST/LIST_NEXT/LIST_PREV
-+
-+ @Description   Macro to get first/last/next/previous entry in a list.
-+
-+ @Param[in]     p_List - A pointer to a list.
-+*//***************************************************************************/
-+#define LIST_FIRST(p_List) (p_List)->p_Next
-+#define LIST_LAST(p_List)  (p_List)->p_Prev
-+#define LIST_NEXT          LIST_FIRST
-+#define LIST_PREV          LIST_LAST
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST_INIT
-+
-+ @Description   Macro for initialization of a list struct.
-+
-+ @Param[in]     lst - The t_List object to initialize.
-+*//***************************************************************************/
-+#define LIST_INIT(lst) {&(lst), &(lst)}
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST
-+
-+ @Description   Macro to declare of a list.
-+
-+ @Param[in]     listName - The list object name.
-+*//***************************************************************************/
-+#define LIST(listName) t_List listName = LIST_INIT(listName)
-+
-+
-+/**************************************************************************//**
-+ @Function      INIT_LIST
-+
-+ @Description   Macro to initialize a list pointer.
-+
-+ @Param[in]     p_List - The list pointer.
-+*//***************************************************************************/
-+#define INIT_LIST(p_List)   LIST_FIRST(p_List) = LIST_LAST(p_List) = (p_List)
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST_OBJECT
-+
-+ @Description   Macro to get the struct (object) for this entry.
-+
-+ @Param[in]     type   - The type of the struct (object) this list is embedded in.
-+ @Param[in]     member - The name of the t_List object within the struct.
-+
-+ @Return        The structure pointer for this entry.
-+*//***************************************************************************/
-+#define MEMBER_OFFSET(type, member) (PTR_TO_UINT(&((type *)0)->member))
-+#define LIST_OBJECT(p_List, type, member) \
-+    ((type *)((char *)(p_List)-MEMBER_OFFSET(type, member)))
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST_FOR_EACH
-+
-+ @Description   Macro to iterate over a list.
-+
-+ @Param[in]     p_Pos  - A pointer to a list to use as a loop counter.
-+ @Param[in]     p_Head - A pointer to the head for your list pointer.
-+
-+ @Cautions      You can't delete items with this routine.
-+                For deletion use LIST_FOR_EACH_SAFE().
-+*//***************************************************************************/
-+#define LIST_FOR_EACH(p_Pos, p_Head) \
-+    for (p_Pos = LIST_FIRST(p_Head); p_Pos != (p_Head); p_Pos = LIST_NEXT(p_Pos))
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST_FOR_EACH_SAFE
-+
-+ @Description   Macro to iterate over a list safe against removal of list entry.
-+
-+ @Param[in]     p_Pos  - A pointer to a list to use as a loop counter.
-+ @Param[in]     p_Tmp  - Another pointer to a list to use as temporary storage.
-+ @Param[in]     p_Head - A pointer to the head for your list pointer.
-+*//***************************************************************************/
-+#define LIST_FOR_EACH_SAFE(p_Pos, p_Tmp, p_Head)                \
-+    for (p_Pos = LIST_FIRST(p_Head), p_Tmp = LIST_FIRST(p_Pos); \
-+         p_Pos != (p_Head);                                     \
-+         p_Pos = p_Tmp, p_Tmp = LIST_NEXT(p_Pos))
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST_FOR_EACH_OBJECT_SAFE
-+
-+ @Description   Macro to iterate over list of given type safely.
-+
-+ @Param[in]     p_Pos  - A pointer to a list to use as a loop counter.
-+ @Param[in]     p_Tmp  - Another pointer to a list to use as temporary storage.
-+ @Param[in]     type   - The type of the struct this is embedded in.
-+ @Param[in]     p_Head - A pointer to the head for your list pointer.
-+ @Param[in]     member - The name of the list_struct within the struct.
-+
-+ @Cautions      You can't delete items with this routine.
-+                For deletion use LIST_FOR_EACH_SAFE().
-+*//***************************************************************************/
-+#define LIST_FOR_EACH_OBJECT_SAFE(p_Pos, p_Tmp, p_Head, type, member)      \
-+    for (p_Pos = LIST_OBJECT(LIST_FIRST(p_Head), type, member),            \
-+         p_Tmp = LIST_OBJECT(LIST_FIRST(&p_Pos->member), type, member);    \
-+         &p_Pos->member != (p_Head);                                       \
-+         p_Pos = p_Tmp,                                                    \
-+         p_Tmp = LIST_OBJECT(LIST_FIRST(&p_Pos->member), type, member))
-+
-+/**************************************************************************//**
-+ @Function      LIST_FOR_EACH_OBJECT
-+
-+ @Description   Macro to iterate over list of given type.
-+
-+ @Param[in]     p_Pos  - A pointer to a list to use as a loop counter.
-+ @Param[in]     type   - The type of the struct this is embedded in.
-+ @Param[in]     p_Head - A pointer to the head for your list pointer.
-+ @Param[in]     member - The name of the list_struct within the struct.
-+
-+ @Cautions      You can't delete items with this routine.
-+                For deletion use LIST_FOR_EACH_SAFE().
-+*//***************************************************************************/
-+#define LIST_FOR_EACH_OBJECT(p_Pos, type, p_Head, member)                  \
-+    for (p_Pos = LIST_OBJECT(LIST_FIRST(p_Head), type, member);            \
-+         &p_Pos->member != (p_Head);                                       \
-+         p_Pos = LIST_OBJECT(LIST_FIRST(&(p_Pos->member)), type, member))
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST_Add
-+
-+ @Description   Add a new entry to a list.
-+
-+                Insert a new entry after the specified head.
-+                This is good for implementing stacks.
-+
-+ @Param[in]     p_New  - A pointer to a new list entry to be added.
-+ @Param[in]     p_Head - A pointer to a list head to add it after.
-+
-+ @Return        none.
-+*//***************************************************************************/
-+static __inline__ void LIST_Add(t_List *p_New, t_List *p_Head)
-+{
-+    LIST_PREV(LIST_NEXT(p_Head)) = p_New;
-+    LIST_NEXT(p_New)             = LIST_NEXT(p_Head);
-+    LIST_PREV(p_New)             = p_Head;
-+    LIST_NEXT(p_Head)            = p_New;
-+}
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST_AddToTail
-+
-+ @Description   Add a new entry to a list.
-+
-+                Insert a new entry before the specified head.
-+                This is useful for implementing queues.
-+
-+ @Param[in]     p_New  - A pointer to a new list entry to be added.
-+ @Param[in]     p_Head - A pointer to a list head to add it before.
-+
-+ @Return        none.
-+*//***************************************************************************/
-+static __inline__ void LIST_AddToTail(t_List *p_New, t_List *p_Head)
-+{
-+    LIST_NEXT(LIST_PREV(p_Head)) = p_New;
-+    LIST_PREV(p_New)             = LIST_PREV(p_Head);
-+    LIST_NEXT(p_New)             = p_Head;
-+    LIST_PREV(p_Head)            = p_New;
-+}
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST_Del
-+
-+ @Description   Deletes entry from a list.
-+
-+ @Param[in]     p_Entry - A pointer to the element to delete from the list.
-+
-+ @Return        none.
-+
-+ @Cautions      LIST_IsEmpty() on entry does not return true after this,
-+                the entry is in an undefined state.
-+*//***************************************************************************/
-+static __inline__ void LIST_Del(t_List *p_Entry)
-+{
-+    LIST_PREV(LIST_NEXT(p_Entry)) = LIST_PREV(p_Entry);
-+    LIST_NEXT(LIST_PREV(p_Entry)) = LIST_NEXT(p_Entry);
-+}
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST_DelAndInit
-+
-+ @Description   Deletes entry from list and reinitialize it.
-+
-+ @Param[in]     p_Entry - A pointer to the element to delete from the list.
-+
-+ @Return        none.
-+*//***************************************************************************/
-+static __inline__ void LIST_DelAndInit(t_List *p_Entry)
-+{
-+    LIST_Del(p_Entry);
-+    INIT_LIST(p_Entry);
-+}
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST_Move
-+
-+ @Description   Delete from one list and add as another's head.
-+
-+ @Param[in]     p_Entry - A pointer to the list entry to move.
-+ @Param[in]     p_Head  - A pointer to the list head that will precede our entry.
-+
-+ @Return        none.
-+*//***************************************************************************/
-+static __inline__ void LIST_Move(t_List *p_Entry, t_List *p_Head)
-+{
-+    LIST_Del(p_Entry);
-+    LIST_Add(p_Entry, p_Head);
-+}
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST_MoveToTail
-+
-+ @Description   Delete from one list and add as another's tail.
-+
-+ @Param[in]     p_Entry - A pointer to the entry to move.
-+ @Param[in]     p_Head  - A pointer to the list head that will follow our entry.
-+
-+ @Return        none.
-+*//***************************************************************************/
-+static __inline__ void LIST_MoveToTail(t_List *p_Entry, t_List *p_Head)
-+{
-+    LIST_Del(p_Entry);
-+    LIST_AddToTail(p_Entry, p_Head);
-+}
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST_IsEmpty
-+
-+ @Description   Tests whether a list is empty.
-+
-+ @Param[in]     p_List - A pointer to the list to test.
-+
-+ @Return        1 if the list is empty, 0 otherwise.
-+*//***************************************************************************/
-+static __inline__ int LIST_IsEmpty(t_List *p_List)
-+{
-+    return (LIST_FIRST(p_List) == p_List);
-+}
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST_Append
-+
-+ @Description   Join two lists.
-+
-+ @Param[in]     p_NewList - A pointer to the new list to add.
-+ @Param[in]     p_Head    - A pointer to the place to add it in the first list.
-+
-+ @Return        none.
-+*//***************************************************************************/
-+void LIST_Append(t_List *p_NewList, t_List *p_Head);
-+
-+
-+/**************************************************************************//**
-+ @Function      LIST_NumOfObjs
-+
-+ @Description   Counts number of objects in the list
-+
-+ @Param[in]     p_List - A pointer to the list which objects are to be counted.
-+
-+ @Return        Number of objects in the list.
-+*//***************************************************************************/
-+int LIST_NumOfObjs(t_List *p_List);
-+
-+/** @} */ /* end of list_id group */
-+/** @} */ /* end of etc_id group */
-+
-+
-+#endif /* __LIST_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/etc/mem_ext.h
-@@ -0,0 +1,318 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+
-+ @File          mem_ext.h
-+
-+ @Description   External prototypes for the memory manager object
-+*//***************************************************************************/
-+
-+#ifndef __MEM_EXT_H
-+#define __MEM_EXT_H
-+
-+#include "std_ext.h"
-+#include "part_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         etc_id   Utility Library Application Programming Interface
-+
-+ @Description   External routines.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         mem_id   Slab Memory Manager
-+
-+ @Description   Slab Memory Manager module functions, definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/* Each block is of the following structure:
-+ *
-+ *
-+ *  +-----------+----------+---------------------------+-----------+-----------+
-+ *  | Alignment |  Prefix  | Data                      | Postfix   | Alignment |
-+ *  |  field    |   field  |  field                    |   field   | Padding   |
-+ *  |           |          |                           |           |           |
-+ *  +-----------+----------+---------------------------+-----------+-----------+
-+ *  and at the beginning of all bytes, an additional optional padding might reside
-+ *  to ensure that the first blocks data field is aligned as requested.
-+ */
-+
-+
-+#define MEM_MAX_NAME_LENGTH     8
-+
-+/**************************************************************************//*
-+ @Description   Memory Segment structure
-+*//***************************************************************************/
-+
-+typedef struct
-+{
-+    char        name[MEM_MAX_NAME_LENGTH];
-+                                    /* The segment's name */
-+    uint8_t     **p_Bases;          /* Base addresses of the segments */
-+    uint8_t     **p_BlocksStack;    /* Array of pointers to blocks */
-+    t_Handle    h_Spinlock;
-+    uint16_t    dataSize;           /* Size of each data block */
-+    uint16_t    prefixSize;         /* How many bytes to reserve before the data */
-+    uint16_t    postfixSize;        /* How many bytes to reserve after the data */
-+    uint16_t    alignment;          /* Requested alignment for the data field */
-+    int         allocOwner;         /* Memory allocation owner */
-+    uint32_t    getFailures;        /* Number of times get failed */
-+    uint32_t    num;                /* Number of blocks in segment */
-+    uint32_t    current;            /* Current block */
-+    bool        consecutiveMem;     /* Allocate consecutive data blocks memory */
-+#ifdef DEBUG_MEM_LEAKS
-+    void        *p_MemDbg;          /* MEM debug database (MEM leaks detection) */
-+    uint32_t    blockOffset;
-+    uint32_t    blockSize;
-+#endif /* DEBUG_MEM_LEAKS */
-+} t_MemorySegment;
-+
-+
-+
-+/**************************************************************************//**
-+ @Function      MEM_Init
-+
-+ @Description   Create a new memory segment.
-+
-+ @Param[in]     name        - Name of memory partition.
-+ @Param[in]     p_Handle    - Handle to new segment is returned through here.
-+ @Param[in]     num         - Number of blocks in new segment.
-+ @Param[in]     dataSize    - Size of blocks in segment.
-+ @Param[in]     prefixSize  - How many bytes to allocate before the data.
-+ @Param[in]     postfixSize - How many bytes to allocate after the data.
-+ @Param[in]     alignment   - Requested alignment for data field (in bytes).
-+
-+ @Return        E_OK - success, E_NO_MEMORY - out of memory.
-+*//***************************************************************************/
-+t_Error MEM_Init(char     name[],
-+                 t_Handle *p_Handle,
-+                 uint32_t num,
-+                 uint16_t dataSize,
-+                 uint16_t prefixSize,
-+                 uint16_t postfixSize,
-+                 uint16_t alignment);
-+
-+/**************************************************************************//**
-+ @Function      MEM_InitSmart
-+
-+ @Description   Create a new memory segment.
-+
-+ @Param[in]     name            - Name of memory partition.
-+ @Param[in]     p_Handle        - Handle to new segment is returned through here.
-+ @Param[in]     num             - Number of blocks in new segment.
-+ @Param[in]     dataSize        - Size of blocks in segment.
-+ @Param[in]     prefixSize      - How many bytes to allocate before the data.
-+ @Param[in]     postfixSize     - How many bytes to allocate after the data.
-+ @Param[in]     alignment       - Requested alignment for data field (in bytes).
-+ @Param[in]     memPartitionId  - Memory partition ID for allocation.
-+ @Param[in]     consecutiveMem  - Whether to allocate the memory blocks
-+                                  continuously or not.
-+
-+ @Return        E_OK - success, E_NO_MEMORY - out of memory.
-+*//***************************************************************************/
-+t_Error MEM_InitSmart(char      name[],
-+                      t_Handle  *p_Handle,
-+                      uint32_t  num,
-+                      uint16_t  dataSize,
-+                      uint16_t  prefixSize,
-+                      uint16_t  postfixSize,
-+                      uint16_t  alignment,
-+                      uint8_t   memPartitionId,
-+                      bool      consecutiveMem);
-+
-+/**************************************************************************//**
-+ @Function      MEM_InitByAddress
-+
-+ @Description   Create a new memory segment with a specified base address.
-+
-+ @Param[in]     name        - Name of memory partition.
-+ @Param[in]     p_Handle    - Handle to new segment is returned through here.
-+ @Param[in]     num         - Number of blocks in new segment.
-+ @Param[in]     dataSize    - Size of blocks in segment.
-+ @Param[in]     prefixSize  - How many bytes to allocate before the data.
-+ @Param[in]     postfixSize - How many bytes to allocate after the data.
-+ @Param[in]     alignment   - Requested alignment for data field (in bytes).
-+ @Param[in]     address     - The required base address.
-+
-+ @Return        E_OK - success, E_NO_MEMORY - out of memory.
-+ *//***************************************************************************/
-+t_Error MEM_InitByAddress(char        name[],
-+                          t_Handle    *p_Handle,
-+                          uint32_t    num,
-+                          uint16_t    dataSize,
-+                          uint16_t    prefixSize,
-+                          uint16_t    postfixSize,
-+                          uint16_t    alignment,
-+                          uint8_t     *address);
-+
-+/**************************************************************************//**
-+ @Function      MEM_Free
-+
-+ @Description   Free a specific memory segment.
-+
-+ @Param[in]     h_Mem - Handle to memory segment.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void MEM_Free(t_Handle h_Mem);
-+
-+/**************************************************************************//**
-+ @Function      MEM_Get
-+
-+ @Description   Get a block of memory from a segment.
-+
-+ @Param[in]     h_Mem - Handle to memory segment.
-+
-+ @Return        Pointer to new memory block on success,0 otherwise.
-+*//***************************************************************************/
-+void * MEM_Get(t_Handle h_Mem);
-+
-+/**************************************************************************//**
-+ @Function      MEM_GetN
-+
-+ @Description   Get up to N blocks of memory from a segment.
-+
-+                The blocks are assumed to be of a fixed size (one size per segment).
-+
-+ @Param[in]     h_Mem   - Handle to memory segment.
-+ @Param[in]     num     - Number of blocks to allocate.
-+ @Param[out]    array   - Array of at least num pointers to which the addresses
-+                          of the allocated blocks are written.
-+
-+ @Return        The number of blocks actually allocated.
-+
-+ @Cautions      Interrupts are disabled for all of the allocation loop.
-+                Although this loop is very short for each block (several machine
-+                instructions), you should not allocate a very large number
-+                of blocks via this routine.
-+*//***************************************************************************/
-+uint16_t MEM_GetN(t_Handle h_Mem, uint32_t num, void *array[]);
-+
-+/**************************************************************************//**
-+ @Function      MEM_Put
-+
-+ @Description   Put a block of memory back to a segment.
-+
-+ @Param[in]     h_Mem   - Handle to memory segment.
-+ @Param[in]     p_Block - The block to return.
-+
-+ @Return        Pointer to new memory block on success,0 otherwise.
-+*//***************************************************************************/
-+t_Error MEM_Put(t_Handle h_Mem, void *p_Block);
-+
-+/**************************************************************************//**
-+ @Function      MEM_ComputePartitionSize
-+
-+ @Description   calculate a tight upper boundary of the size of a partition with
-+                given attributes.
-+
-+                The returned value is suitable if one wants to use MEM_InitByAddress().
-+
-+ @Param[in]     num         - The number of blocks in the segment.
-+ @Param[in]     dataSize    - Size of block to get.
-+ @Param[in]     prefixSize  - The prefix size
-+ @Param         postfixSize - The postfix size
-+ @Param[in]     alignment   - The requested alignment value (in bytes)
-+
-+ @Return        The memory block size a segment with the given attributes needs.
-+*//***************************************************************************/
-+uint32_t MEM_ComputePartitionSize(uint32_t num,
-+                                  uint16_t dataSize,
-+                                  uint16_t prefixSize,
-+                                  uint16_t postfixSize,
-+                                  uint16_t alignment);
-+
-+#ifdef DEBUG_MEM_LEAKS
-+#if !((defined(__MWERKS__) || defined(__GNUC__)) && (__dest_os == __ppc_eabi))
-+#error  "Memory-Leaks-Debug option is supported only for freescale CodeWarrior"
-+#endif /* !(defined(__MWERKS__) && ... */
-+
-+/**************************************************************************//**
-+ @Function      MEM_CheckLeaks
-+
-+ @Description   Report MEM object leaks.
-+
-+                This routine is automatically called by the MEM_Free() routine,
-+                but it can also be invoked while the MEM object is alive.
-+
-+ @Param[in]     h_Mem - Handle to memory segment.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void MEM_CheckLeaks(t_Handle h_Mem);
-+
-+#else  /* not DEBUG_MEM_LEAKS */
-+#define MEM_CheckLeaks(h_Mem)
-+#endif /* not DEBUG_MEM_LEAKS */
-+
-+/**************************************************************************//**
-+ @Description   Get base of MEM
-+*//***************************************************************************/
-+#define MEM_GetBase(h_Mem)             ((t_MemorySegment *)(h_Mem))->p_Bases[0]
-+
-+/**************************************************************************//**
-+ @Description   Get size of MEM block
-+*//***************************************************************************/
-+#define MEM_GetSize(h_Mem)             ((t_MemorySegment *)(h_Mem))->dataSize
-+
-+/**************************************************************************//**
-+ @Description   Get prefix size of MEM block
-+*//***************************************************************************/
-+#define MEM_GetPrefixSize(h_Mem)       ((t_MemorySegment *)(h_Mem))->prefixSize
-+
-+/**************************************************************************//**
-+ @Description   Get postfix size of MEM block
-+*//***************************************************************************/
-+#define MEM_GetPostfixSize(h_Mem)      ((t_MemorySegment *)(h_Mem))->postfixSize
-+
-+/**************************************************************************//**
-+ @Description   Get alignment of MEM block (in bytes)
-+*//***************************************************************************/
-+#define MEM_GetAlignment(h_Mem)        ((t_MemorySegment *)(h_Mem))->alignment
-+
-+/**************************************************************************//**
-+ @Description   Get the number of blocks in the segment
-+*//***************************************************************************/
-+#define MEM_GetNumOfBlocks(h_Mem)             ((t_MemorySegment *)(h_Mem))->num
-+
-+/** @} */ /* end of MEM group */
-+/** @} */ /* end of etc_id group */
-+
-+
-+#endif /* __MEM_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/etc/memcpy_ext.h
-@@ -0,0 +1,208 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+
-+ @File          memcpy_ext.h
-+
-+ @Description   Efficient functions for copying and setting blocks of memory.
-+*//***************************************************************************/
-+
-+#ifndef __MEMCPY_EXT_H
-+#define __MEMCPY_EXT_H
-+
-+#include "std_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         etc_id   Utility Library Application Programming Interface
-+
-+ @Description   External routines.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         mem_cpy Memory Copy
-+
-+ @Description   Memory Copy module functions,definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      MemCpy32
-+
-+ @Description   Copies one memory buffer into another one in 4-byte chunks!
-+                Which should be more efficient than byte by byte.
-+
-+                For large buffers (over 60 bytes) this function is about 4 times
-+                more efficient than the trivial memory copy. For short buffers
-+                it is reduced to the trivial copy and may be a bit worse.
-+
-+ @Param[in]     pDst    - The address of the destination buffer.
-+ @Param[in]     pSrc    - The address of the source buffer.
-+ @Param[in]     size    - The number of bytes that will be copied from pSrc to pDst.
-+
-+ @Return        pDst (the address of the destination buffer).
-+
-+ @Cautions      There is no parameter or boundary checking! It is up to the user
-+                to supply non-null parameters as source & destination and size
-+                that actually fits into the destination buffer.
-+*//***************************************************************************/
-+void * MemCpy32(void* pDst,void* pSrc, uint32_t size);
-+void * IO2IOCpy32(void* pDst,void* pSrc, uint32_t size);
-+void * IO2MemCpy32(void* pDst,void* pSrc, uint32_t size);
-+void * Mem2IOCpy32(void* pDst,void* pSrc, uint32_t size);
-+
-+/**************************************************************************//**
-+ @Function      MemCpy64
-+
-+ @Description   Copies one memory buffer into another one in 8-byte chunks!
-+                Which should be more efficient than byte by byte.
-+
-+                For large buffers (over 60 bytes) this function is about 8 times
-+                more efficient than the trivial memory copy. For short buffers
-+                it is reduced to the trivial copy and may be a bit worse.
-+
-+                Some testing suggests that MemCpy32() preforms better than
-+                MemCpy64() over small buffers. On average they break even at
-+                100 byte buffers. For buffers larger than that MemCpy64 is
-+                superior.
-+
-+ @Param[in]     pDst    - The address of the destination buffer.
-+ @Param[in]     pSrc    - The address of the source buffer.
-+ @Param[in]     size    - The number of bytes that will be copied from pSrc to pDst.
-+
-+ @Return        pDst (the address of the destination buffer).
-+
-+ @Cautions      There is no parameter or boundary checking! It is up to the user
-+                to supply non null parameters as source & destination and size
-+                that actually fits into their buffer.
-+
-+                Do not use under Linux.
-+*//***************************************************************************/
-+void * MemCpy64(void* pDst,void* pSrc, uint32_t size);
-+
-+/**************************************************************************//**
-+ @Function      MemSet32
-+
-+ @Description   Sets all bytes of a memory buffer to a specific value, in
-+                4-byte chunks.
-+
-+ @Param[in]     pDst    - The address of the destination buffer.
-+ @Param[in]     val     - Value to set destination bytes to.
-+ @Param[in]     size    - The number of bytes that will be set to val.
-+
-+ @Return        pDst (the address of the destination buffer).
-+
-+ @Cautions      There is no parameter or boundary checking! It is up to the user
-+                to supply non null parameter as destination and size
-+                that actually fits into the destination buffer.
-+*//***************************************************************************/
-+void * MemSet32(void* pDst, uint8_t val, uint32_t size);
-+void * IOMemSet32(void* pDst, uint8_t val, uint32_t size);
-+
-+/**************************************************************************//**
-+ @Function      MemSet64
-+
-+ @Description   Sets all bytes of a memory buffer to a specific value, in
-+                8-byte chunks.
-+
-+ @Param[in]     pDst    - The address of the destination buffer.
-+ @Param[in]     val     - Value to set destination bytes to.
-+ @Param[in]     size    - The number of bytes that will be set to val.
-+
-+ @Return        pDst (the address of the destination buffer).
-+
-+ @Cautions      There is no parameter or boundary checking! It is up to the user
-+                to supply non null parameter as destination and size
-+                that actually fits into the destination buffer.
-+*//***************************************************************************/
-+void * MemSet64(void* pDst, uint8_t val, uint32_t size);
-+
-+/**************************************************************************//**
-+ @Function      MemDisp
-+
-+ @Description   Displays a block of memory in chunks of 32 bits.
-+
-+ @Param[in]     addr    - The address of the memory to display.
-+ @Param[in]     size    - The number of bytes that will be displayed.
-+
-+ @Return        None.
-+
-+ @Cautions      There is no parameter or boundary checking! It is up to the user
-+                to supply non null parameter as destination and size
-+                that actually fits into the destination buffer.
-+*//***************************************************************************/
-+void MemDisp(uint8_t *addr, int size);
-+
-+/**************************************************************************//**
-+ @Function      MemCpy8
-+
-+ @Description   Trivial copy one memory buffer into another byte by byte
-+
-+ @Param[in]     pDst    - The address of the destination buffer.
-+ @Param[in]     pSrc    - The address of the source buffer.
-+ @Param[in]     size    - The number of bytes that will be copied from pSrc to pDst.
-+
-+ @Return        pDst (the address of the destination buffer).
-+
-+ @Cautions      There is no parameter or boundary checking! It is up to the user
-+                to supply non-null parameters as source & destination and size
-+                that actually fits into the destination buffer.
-+*//***************************************************************************/
-+void * MemCpy8(void* pDst,void* pSrc, uint32_t size);
-+
-+/**************************************************************************//**
-+ @Function      MemSet8
-+
-+ @Description   Sets all bytes of a memory buffer to a specific value byte by byte.
-+
-+ @Param[in]     pDst    - The address of the destination buffer.
-+ @Param[in]     c       - Value to set destination bytes to.
-+ @Param[in]     size    - The number of bytes that will be set to val.
-+
-+ @Return        pDst (the address of the destination buffer).
-+
-+ @Cautions      There is no parameter or boundary checking! It is up to the user
-+                to supply non null parameter as destination and size
-+                that actually fits into the destination buffer.
-+*//***************************************************************************/
-+void * MemSet8(void* pDst, int c, uint32_t size);
-+
-+/** @} */ /* end of mem_cpy group */
-+/** @} */ /* end of etc_id group */
-+
-+
-+#endif /* __MEMCPY_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/etc/mm_ext.h
-@@ -0,0 +1,310 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          mm_ext.h
-+
-+ @Description   Memory Manager Application Programming Interface
-+*//***************************************************************************/
-+#ifndef __MM_EXT
-+#define __MM_EXT
-+
-+#include "std_ext.h"
-+
-+#define MM_MAX_ALIGNMENT    20  /* Alignments from 2 to 128 are available
-+                                   where maximum alignment defined as
-+                                   MM_MAX_ALIGNMENT power of 2 */
-+
-+#define MM_MAX_NAME_LEN     32
-+
-+/**************************************************************************//**
-+ @Group         etc_id   Utility Library Application Programming Interface
-+
-+ @Description   External routines.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         mm_grp Flexible Memory Manager
-+
-+ @Description   Flexible Memory Manager module functions,definitions and enums.
-+                (All of the following functions,definitions and enums can be found in mm_ext.h)
-+
-+ @{
-+*//***************************************************************************/
-+
-+
-+/**************************************************************************//**
-+ @Function      MM_Init
-+
-+ @Description   Initializes a new MM object.
-+
-+                It initializes a new memory block consisting of base address
-+                and size of the available memory by calling to MemBlock_Init
-+                routine. It is also initializes a new free block for each
-+                by calling FreeBlock_Init routine, which is pointed to
-+                the almost all memory started from the required alignment
-+                from the base address and to the end of the memory.
-+                The handle to the new MM object is returned via "MM"
-+                argument (passed by reference).
-+
-+ @Param[in]     h_MM    - Handle to the MM object.
-+ @Param[in]     base    - Base address of the MM.
-+ @Param[in]     size    - Size of the MM.
-+
-+ @Return        E_OK is returned on success. E_NOMEMORY is returned if the new MM object or a new free block can not be initialized.
-+*//***************************************************************************/
-+t_Error     MM_Init(t_Handle *h_MM, uint64_t base, uint64_t size);
-+
-+/**************************************************************************//**
-+ @Function      MM_Get
-+
-+ @Description   Allocates a block of memory according to the given size and the alignment.
-+
-+                The Alignment argument tells from which
-+                free list allocate a block of memory. 2^alignment indicates
-+                the alignment that the base address of the allocated block
-+                should have. So, the only values 1, 2, 4, 8, 16, 32 and 64
-+                are available for the alignment argument.
-+                The routine passes through the specific free list of free
-+                blocks and seeks for a first block that have anough memory
-+                that  is required (best fit).
-+                After the block is found and data is allocated, it calls
-+                the internal MM_CutFree routine to update all free lists
-+                do not include a just allocated block. Of course, each
-+                free list contains a free blocks with the same alignment.
-+                It is also creates a busy block that holds
-+                information about an allocated block.
-+
-+ @Param[in]     h_MM        - Handle to the MM object.
-+ @Param[in]     size        - Size of the MM.
-+ @Param[in]     alignment   - Index as a power of two defines a required
-+                              alignment (in bytes); Should be 1, 2, 4, 8, 16, 32 or 64
-+ @Param[in]     name        - The name that specifies an allocated block.
-+
-+ @Return        base address of an allocated block ILLEGAL_BASE if can't allocate a block
-+*//***************************************************************************/
-+uint64_t    MM_Get(t_Handle h_MM, uint64_t size, uint64_t alignment, char *name);
-+
-+/**************************************************************************//**
-+ @Function      MM_GetBase
-+
-+ @Description   Gets the base address of the required MM objects.
-+
-+ @Param[in]     h_MM - Handle to the MM object.
-+
-+ @Return        base address of the block.
-+*//***************************************************************************/
-+uint64_t    MM_GetBase(t_Handle h_MM);
-+
-+/**************************************************************************//**
-+ @Function      MM_GetForce
-+
-+ @Description   Force memory allocation.
-+
-+                It means to allocate a block of memory of the given
-+                size from the given base address.
-+                The routine checks if the required block can be allocated
-+                (that is it is free) and then, calls the internal MM_CutFree
-+                routine to update all free lists do not include that block.
-+
-+ @Param[in]     h_MM    - Handle to the MM object.
-+ @Param[in]     base    - Base address of the MM.
-+ @Param[in]     size    - Size of the MM.
-+ @Param[in]     name    - Name that specifies an allocated block.
-+
-+ @Return        base address of an allocated block, ILLEGAL_BASE if can't allocate a block.
-+*//***************************************************************************/
-+uint64_t    MM_GetForce(t_Handle h_MM, uint64_t base, uint64_t size, char *name);
-+
-+/**************************************************************************//**
-+ @Function      MM_GetForceMin
-+
-+ @Description   Allocates a block of memory according to the given size, the alignment and minimum base address.
-+
-+                The Alignment argument tells from which
-+                free list allocate a block of memory. 2^alignment indicates
-+                the alignment that the base address of the allocated block
-+                should have. So, the only values 1, 2, 4, 8, 16, 32 and 64
-+                are available for the alignment argument.
-+                The minimum baser address forces the location of the block
-+                to be from a given address onward.
-+                The routine passes through the specific free list of free
-+                blocks and seeks for the first base address equal or smaller
-+                than the required minimum address and end address larger than
-+                than the required base + its size - i.e. that may contain
-+                the required block.
-+                After the block is found and data is allocated, it calls
-+                the internal MM_CutFree routine to update all free lists
-+                do not include a just allocated block. Of course, each
-+                free list contains a free blocks with the same alignment.
-+                It is also creates a busy block that holds
-+                information about an allocated block.
-+
-+ @Param[in]     h_MM        - Handle to the MM object.
-+ @Param[in]     size        - Size of the MM.
-+ @Param[in]     alignment   - Index as a power of two defines a required
-+                              alignment (in bytes); Should be 1, 2, 4, 8, 16, 32 or 64
-+ @Param[in]     min         - The minimum base address of the block.
-+ @Param[in]     name        - Name that specifies an allocated block.
-+
-+ @Return        base address of an allocated block,ILLEGAL_BASE if can't allocate a block.
-+*//***************************************************************************/
-+uint64_t    MM_GetForceMin(t_Handle h_MM,
-+                           uint64_t size,
-+                           uint64_t alignment,
-+                           uint64_t min,
-+                           char     *name);
-+
-+/**************************************************************************//**
-+ @Function      MM_Put
-+
-+ @Description   Puts a block of memory of the given base address back to the memory.
-+
-+                It checks if there is a busy block with the
-+                given base address. If not, it returns 0, that
-+                means can't free a block. Otherwise, it gets parameters of
-+                the busy block and after it updates lists of free blocks,
-+                removes that busy block from the list by calling to MM_CutBusy
-+                routine.
-+                After that it calls to MM_AddFree routine to add a new free
-+                block to the free lists.
-+
-+ @Param[in]     h_MM    - Handle to the MM object.
-+ @Param[in]     base    - Base address of the MM.
-+
-+ @Return         The size of bytes released, 0 if failed.
-+*//***************************************************************************/
-+uint64_t    MM_Put(t_Handle h_MM, uint64_t base);
-+
-+/**************************************************************************//**
-+ @Function      MM_PutForce
-+
-+ @Description   Releases a block of memory of the required size from the required base address.
-+
-+                First, it calls to MM_CutBusy routine
-+                to cut a free block from the busy list. And then, calls to
-+                MM_AddFree routine to add the free block to the free lists.
-+
-+ @Param[in]     h_MM    - Handle to the MM object.
-+ @Param[in]     base    - Base address of of a block to free.
-+ @Param[in]     size    - Size of a block to free.
-+
-+ @Return        The number of bytes released, 0 on failure.
-+*//***************************************************************************/
-+uint64_t    MM_PutForce(t_Handle h_MM, uint64_t base, uint64_t size);
-+
-+/**************************************************************************//**
-+ @Function      MM_Add
-+
-+ @Description   Adds a new memory block for memory allocation.
-+
-+                When a new memory block is initialized and added to the
-+                memory list, it calls to MM_AddFree routine to add the
-+                new free block to the free lists.
-+
-+ @Param[in]     h_MM    - Handle to the MM object.
-+ @Param[in]     base    - Base address of the memory block.
-+ @Param[in]     size    - Size of the memory block.
-+
-+ @Return        E_OK on success, otherwise returns an error code.
-+*//***************************************************************************/
-+t_Error     MM_Add(t_Handle h_MM, uint64_t base, uint64_t size);
-+
-+/**************************************************************************//**
-+ @Function      MM_Dump
-+
-+ @Description   Prints results of free and busy lists.
-+
-+ @Param[in]     h_MM        - Handle to the MM object.
-+*//***************************************************************************/
-+void        MM_Dump(t_Handle h_MM);
-+
-+/**************************************************************************//**
-+ @Function      MM_Free
-+
-+ @Description   Releases memory allocated for MM object.
-+
-+ @Param[in]     h_MM - Handle of the MM object.
-+*//***************************************************************************/
-+void        MM_Free(t_Handle h_MM);
-+
-+/**************************************************************************//**
-+ @Function      MM_GetMemBlock
-+
-+ @Description   Returns base address of the memory block specified by the index.
-+
-+                If index is 0, returns base address
-+                of the first memory block, 1 - returns base address
-+                of the second memory block, etc.
-+                Note, those memory blocks are allocated by the
-+                application before MM_Init or MM_Add and have to
-+                be released by the application before or after invoking
-+                the MM_Free routine.
-+
-+ @Param[in]     h_MM    - Handle to the MM object.
-+ @Param[in]     index   - Index of the memory block.
-+
-+ @Return        valid base address or ILLEGAL_BASE if no memory block specified by the index.
-+*//***************************************************************************/
-+uint64_t    MM_GetMemBlock(t_Handle h_MM, int index);
-+
-+/**************************************************************************//**
-+ @Function      MM_InRange
-+
-+ @Description   Checks if a specific address is in the memory range of the passed MM object.
-+
-+ @Param[in]     h_MM    - Handle to the MM object.
-+ @Param[in]     addr    - The address to be checked.
-+
-+ @Return        TRUE if the address is in the address range of the block, FALSE otherwise.
-+*//***************************************************************************/
-+bool        MM_InRange(t_Handle h_MM, uint64_t addr);
-+
-+/**************************************************************************//**
-+ @Function      MM_GetFreeMemSize
-+
-+ @Description   Returns the size (in bytes) of free memory.
-+
-+ @Param[in]     h_MM    - Handle to the MM object.
-+
-+ @Return        Free memory size in bytes.
-+*//***************************************************************************/
-+uint64_t MM_GetFreeMemSize(t_Handle h_MM);
-+
-+
-+/** @} */ /* end of mm_grp group */
-+/** @} */ /* end of etc_id group */
-+
-+#endif /* __MM_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/etc/sprint_ext.h
-@@ -0,0 +1,118 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          sprint_ext.h
-+
-+ @Description   Debug routines (externals).
-+
-+*//***************************************************************************/
-+
-+#ifndef __SPRINT_EXT_H
-+#define __SPRINT_EXT_H
-+
-+
-+#if defined(NCSW_LINUX) && defined(__KERNEL__)
-+#include <linux/kernel.h>
-+
-+#elif defined(NCSW_VXWORKS)
-+#include "private/stdioP.h"
-+
-+#else
-+#include <stdio.h>
-+#endif /* defined(NCSW_LINUX) && defined(__KERNEL__) */
-+
-+#include "std_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         etc_id   Utility Library Application Programming Interface
-+
-+ @Description   External routines.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         sprint_id Sprint
-+
-+ @Description   Sprint & Sscan module functions,definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      Sprint
-+
-+ @Description   Format a string and place it in a buffer.
-+
-+ @Param[in]     buff - The buffer to place the result into.
-+ @Param[in]     str  - The format string to use.
-+ @Param[in]     ...  - Arguments for the format string.
-+
-+ @Return        Number of bytes formatted.
-+*//***************************************************************************/
-+int Sprint(char *buff, const char *str, ...);
-+
-+/**************************************************************************//**
-+ @Function      Snprint
-+
-+ @Description   Format a string and place it in a buffer.
-+
-+ @Param[in]     buf  - The buffer to place the result into.
-+ @Param[in]     size - The size of the buffer, including the trailing null space.
-+ @Param[in]     fmt  - The format string to use.
-+ @Param[in]     ...  - Arguments for the format string.
-+
-+ @Return        Number of bytes formatted.
-+*//***************************************************************************/
-+int Snprint(char * buf, uint32_t size, const char *fmt, ...);
-+
-+/**************************************************************************//**
-+ @Function      Sscan
-+
-+ @Description   Unformat a buffer into a list of arguments.
-+
-+ @Param[in]     buf  - input buffer.
-+ @Param[in]     fmt  - formatting of buffer.
-+ @Param[out]    ...  - resulting arguments.
-+
-+ @Return        Number of bytes unformatted.
-+*//***************************************************************************/
-+int Sscan(const char * buf, const char * fmt, ...);
-+
-+/** @} */ /* end of sprint_id group */
-+/** @} */ /* end of etc_id group */
-+
-+
-+#endif /* __SPRINT_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/common/arch/ppc_access.h
-@@ -0,0 +1,37 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef FL_E500_MACROS_H
-+#define FL_E500_MACROS_H
-+
-+#endif /* FL_E500_MACROS_H */
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/common/general.h
-@@ -0,0 +1,52 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __GENERAL_H
-+#define __GENERAL_H
-+
-+#include "std_ext.h"
-+#if !defined(NCSW_LINUX)
-+#include "errno.h"
-+#endif
-+
-+
-+extern uint32_t get_mac_addr_crc(uint64_t _addr);
-+
-+#ifndef CONFIG_FMAN_ARM
-+#define iowrite32be(val, addr)  WRITE_UINT32(*addr, val)
-+#define ioread32be(addr)        GET_UINT32(*addr)
-+#endif
-+
-+#define ether_crc(len, addr)    get_mac_addr_crc(*(uint64_t *)(addr)>>16)
-+
-+
-+#endif /* __GENERAL_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fman_common.h
-@@ -0,0 +1,78 @@
-+/*
-+ * Copyright 2008-2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#ifndef __FMAN_COMMON_H
-+#define __FMAN_COMMON_H
-+
-+/**************************************************************************//**
-+  @Description       NIA Description
-+*//***************************************************************************/
-+#define NIA_ORDER_RESTOR                        0x00800000
-+#define NIA_ENG_FM_CTL                          0x00000000
-+#define NIA_ENG_PRS                             0x00440000
-+#define NIA_ENG_KG                              0x00480000
-+#define NIA_ENG_PLCR                            0x004C0000
-+#define NIA_ENG_BMI                             0x00500000
-+#define NIA_ENG_QMI_ENQ                         0x00540000
-+#define NIA_ENG_QMI_DEQ                         0x00580000
-+#define NIA_ENG_MASK                            0x007C0000
-+
-+#define NIA_FM_CTL_AC_CC                        0x00000006
-+#define NIA_FM_CTL_AC_HC                        0x0000000C
-+#define NIA_FM_CTL_AC_IND_MODE_TX               0x00000008
-+#define NIA_FM_CTL_AC_IND_MODE_RX               0x0000000A
-+#define NIA_FM_CTL_AC_FRAG                      0x0000000e
-+#define NIA_FM_CTL_AC_PRE_FETCH                 0x00000010
-+#define NIA_FM_CTL_AC_POST_FETCH_PCD            0x00000012
-+#define NIA_FM_CTL_AC_POST_FETCH_PCD_UDP_LEN    0x00000018
-+#define NIA_FM_CTL_AC_POST_FETCH_NO_PCD         0x00000012
-+#define NIA_FM_CTL_AC_FRAG_CHECK                0x00000014
-+#define NIA_FM_CTL_AC_PRE_CC                    0x00000020
-+
-+
-+#define NIA_BMI_AC_ENQ_FRAME                    0x00000002
-+#define NIA_BMI_AC_TX_RELEASE                   0x000002C0
-+#define NIA_BMI_AC_RELEASE                      0x000000C0
-+#define NIA_BMI_AC_DISCARD                      0x000000C1
-+#define NIA_BMI_AC_TX                           0x00000274
-+#define NIA_BMI_AC_FETCH                        0x00000208
-+#define NIA_BMI_AC_MASK                         0x000003FF
-+
-+#define NIA_KG_DIRECT                           0x00000100
-+#define NIA_KG_CC_EN                            0x00000200
-+#define NIA_PLCR_ABSOLUTE                       0x00008000
-+
-+#define NIA_BMI_AC_ENQ_FRAME_WITHOUT_DMA        0x00000202
-+#define NIA_BMI_AC_FETCH_ALL_FRAME              0x0000020c
-+
-+#endif /* __FMAN_COMMON_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_enet.h
-@@ -0,0 +1,273 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __FSL_ENET_H
-+#define __FSL_ENET_H
-+
-+/**
-+ @Description  Ethernet MAC-PHY Interface
-+*/
-+
-+enum enet_interface {
-+	E_ENET_IF_MII		= 0x00010000, /**< MII interface */
-+	E_ENET_IF_RMII		= 0x00020000, /**< RMII interface */
-+	E_ENET_IF_SMII		= 0x00030000, /**< SMII interface */
-+	E_ENET_IF_GMII		= 0x00040000, /**< GMII interface */
-+	E_ENET_IF_RGMII		= 0x00050000, /**< RGMII interface */
-+	E_ENET_IF_TBI		= 0x00060000, /**< TBI interface */
-+	E_ENET_IF_RTBI		= 0x00070000, /**< RTBI interface */
-+	E_ENET_IF_SGMII		= 0x00080000, /**< SGMII interface */
-+	E_ENET_IF_XGMII		= 0x00090000, /**< XGMII interface */
-+	E_ENET_IF_QSGMII	= 0x000a0000, /**< QSGMII interface */
-+	E_ENET_IF_XFI		= 0x000b0000  /**< XFI interface */
-+};
-+
-+/**
-+ @Description  Ethernet Speed (nominal data rate)
-+*/
-+enum enet_speed {
-+	E_ENET_SPEED_10		= 10,	/**< 10 Mbps */
-+	E_ENET_SPEED_100	= 100,	/**< 100 Mbps */
-+	E_ENET_SPEED_1000	= 1000,	/**< 1000 Mbps = 1 Gbps */
-+	E_ENET_SPEED_2500	= 2500,	/**< 2500 Mbps = 2.5 Gbps */
-+	E_ENET_SPEED_10000	= 10000	/**< 10000 Mbps = 10 Gbps */
-+};
-+
-+enum mac_type {
-+	E_MAC_DTSEC,
-+	E_MAC_TGEC,
-+	E_MAC_MEMAC
-+};
-+
-+/**************************************************************************//**
-+ @Description   Enum for inter-module interrupts registration
-+*//***************************************************************************/
-+enum fman_event_modules {
-+	E_FMAN_MOD_PRS,                   /**< Parser event */
-+	E_FMAN_MOD_KG,                    /**< Keygen event */
-+	E_FMAN_MOD_PLCR,                  /**< Policer event */
-+	E_FMAN_MOD_10G_MAC,               /**< 10G MAC event */
-+	E_FMAN_MOD_1G_MAC,                /**< 1G MAC event */
-+	E_FMAN_MOD_TMR,                   /**< Timer event */
-+	E_FMAN_MOD_FMAN_CTRL,             /**< FMAN Controller  Timer event */
-+	E_FMAN_MOD_MACSEC,
-+	E_FMAN_MOD_DUMMY_LAST
-+};
-+
-+/**************************************************************************//**
-+ @Description   Enum for interrupts types
-+*//***************************************************************************/
-+enum fman_intr_type {
-+	E_FMAN_INTR_TYPE_ERR,
-+	E_FMAN_INTR_TYPE_NORMAL
-+};
-+
-+/**************************************************************************//**
-+ @Description   enum for defining MAC types
-+*//***************************************************************************/
-+enum fman_mac_type {
-+	E_FMAN_MAC_10G = 0,               /**< 10G MAC */
-+	E_FMAN_MAC_1G                     /**< 1G MAC */
-+};
-+
-+enum fman_mac_exceptions {
-+	E_FMAN_MAC_EX_10G_MDIO_SCAN_EVENTMDIO = 0,
-+		/**< 10GEC MDIO scan event interrupt */
-+	E_FMAN_MAC_EX_10G_MDIO_CMD_CMPL,
-+		/**< 10GEC MDIO command completion interrupt */
-+	E_FMAN_MAC_EX_10G_REM_FAULT,
-+		/**< 10GEC, mEMAC Remote fault interrupt */
-+	E_FMAN_MAC_EX_10G_LOC_FAULT,
-+		/**< 10GEC, mEMAC Local fault interrupt */
-+	E_FMAN_MAC_EX_10G_1TX_ECC_ER,
-+		/**< 10GEC, mEMAC Transmit frame ECC error interrupt */
-+	E_FMAN_MAC_EX_10G_TX_FIFO_UNFL,
-+		/**< 10GEC, mEMAC Transmit FIFO underflow interrupt */
-+	E_FMAN_MAC_EX_10G_TX_FIFO_OVFL,
-+		/**< 10GEC, mEMAC Transmit FIFO overflow interrupt */
-+	E_FMAN_MAC_EX_10G_TX_ER,
-+		/**< 10GEC Transmit frame error interrupt */
-+	E_FMAN_MAC_EX_10G_RX_FIFO_OVFL,
-+		/**< 10GEC, mEMAC Receive FIFO overflow interrupt */
-+	E_FMAN_MAC_EX_10G_RX_ECC_ER,
-+		/**< 10GEC, mEMAC Receive frame ECC error interrupt */
-+	E_FMAN_MAC_EX_10G_RX_JAB_FRM,
-+		/**< 10GEC Receive jabber frame interrupt */
-+	E_FMAN_MAC_EX_10G_RX_OVRSZ_FRM,
-+		/**< 10GEC Receive oversized frame interrupt */
-+	E_FMAN_MAC_EX_10G_RX_RUNT_FRM,
-+		/**< 10GEC Receive runt frame interrupt */
-+	E_FMAN_MAC_EX_10G_RX_FRAG_FRM,
-+		/**< 10GEC Receive fragment frame interrupt */
-+	E_FMAN_MAC_EX_10G_RX_LEN_ER,
-+		/**< 10GEC Receive payload length error interrupt */
-+	E_FMAN_MAC_EX_10G_RX_CRC_ER,
-+		/**< 10GEC Receive CRC error interrupt */
-+	E_FMAN_MAC_EX_10G_RX_ALIGN_ER,
-+		/**< 10GEC Receive alignment error interrupt */
-+	E_FMAN_MAC_EX_1G_BAB_RX,
-+		/**< dTSEC Babbling receive error */
-+	E_FMAN_MAC_EX_1G_RX_CTL,
-+		/**< dTSEC Receive control (pause frame) interrupt */
-+	E_FMAN_MAC_EX_1G_GRATEFUL_TX_STP_COMPLET,
-+		/**< dTSEC Graceful transmit stop complete */
-+	E_FMAN_MAC_EX_1G_BAB_TX,
-+		/**< dTSEC Babbling transmit error */
-+	E_FMAN_MAC_EX_1G_TX_CTL,
-+		/**< dTSEC Transmit control (pause frame) interrupt */
-+	E_FMAN_MAC_EX_1G_TX_ERR,
-+		/**< dTSEC Transmit error */
-+	E_FMAN_MAC_EX_1G_LATE_COL,
-+		/**< dTSEC Late collision */
-+	E_FMAN_MAC_EX_1G_COL_RET_LMT,
-+		/**< dTSEC Collision retry limit */
-+	E_FMAN_MAC_EX_1G_TX_FIFO_UNDRN,
-+		/**< dTSEC Transmit FIFO underrun */
-+	E_FMAN_MAC_EX_1G_MAG_PCKT,
-+		/**< dTSEC Magic Packet detection */
-+	E_FMAN_MAC_EX_1G_MII_MNG_RD_COMPLET,
-+		/**< dTSEC MII management read completion */
-+	E_FMAN_MAC_EX_1G_MII_MNG_WR_COMPLET,
-+		/**< dTSEC MII management write completion */
-+	E_FMAN_MAC_EX_1G_GRATEFUL_RX_STP_COMPLET,
-+		/**< dTSEC Graceful receive stop complete */
-+	E_FMAN_MAC_EX_1G_TX_DATA_ERR,
-+		/**< dTSEC Internal data error on transmit */
-+	E_FMAN_MAC_EX_1G_RX_DATA_ERR,
-+		/**< dTSEC Internal data error on receive */
-+	E_FMAN_MAC_EX_1G_1588_TS_RX_ERR,
-+		/**< dTSEC Time-Stamp Receive Error */
-+	E_FMAN_MAC_EX_1G_RX_MIB_CNT_OVFL,
-+		/**< dTSEC MIB counter overflow */
-+	E_FMAN_MAC_EX_TS_FIFO_ECC_ERR,
-+		/**< mEMAC Time-stamp FIFO ECC error interrupt;
-+		not supported on T4240/B4860 rev1 chips */
-+};
-+
-+#define ENET_IF_SGMII_BASEX 0x80000000
-+	/**< SGMII/QSGII interface with 1000BaseX auto-negotiation between MAC
-+	and phy or backplane;
-+	Note: 1000BaseX auto-negotiation relates only to interface between MAC
-+	and phy/backplane, SGMII phy can still synchronize with far-end phy at
-+	10Mbps, 100Mbps or 1000Mbps */
-+
-+enum enet_mode {
-+	E_ENET_MODE_INVALID           = 0,
-+		/**< Invalid Ethernet mode */
-+	E_ENET_MODE_MII_10            = (E_ENET_IF_MII   | E_ENET_SPEED_10),
-+		/**<    10 Mbps MII   */
-+	E_ENET_MODE_MII_100           = (E_ENET_IF_MII   | E_ENET_SPEED_100),
-+		/**<   100 Mbps MII   */
-+	E_ENET_MODE_RMII_10           = (E_ENET_IF_RMII  | E_ENET_SPEED_10),
-+		/**<    10 Mbps RMII  */
-+	E_ENET_MODE_RMII_100          = (E_ENET_IF_RMII  | E_ENET_SPEED_100),
-+		/**<   100 Mbps RMII  */
-+	E_ENET_MODE_SMII_10           = (E_ENET_IF_SMII  | E_ENET_SPEED_10),
-+		/**<    10 Mbps SMII  */
-+	E_ENET_MODE_SMII_100          = (E_ENET_IF_SMII  | E_ENET_SPEED_100),
-+		/**<   100 Mbps SMII  */
-+	E_ENET_MODE_GMII_1000         = (E_ENET_IF_GMII  | E_ENET_SPEED_1000),
-+		/**<  1000 Mbps GMII  */
-+	E_ENET_MODE_RGMII_10          = (E_ENET_IF_RGMII | E_ENET_SPEED_10),
-+		/**<    10 Mbps RGMII */
-+	E_ENET_MODE_RGMII_100         = (E_ENET_IF_RGMII | E_ENET_SPEED_100),
-+		/**<   100 Mbps RGMII */
-+	E_ENET_MODE_RGMII_1000        = (E_ENET_IF_RGMII | E_ENET_SPEED_1000),
-+		/**<  1000 Mbps RGMII */
-+	E_ENET_MODE_TBI_1000          = (E_ENET_IF_TBI   | E_ENET_SPEED_1000),
-+		/**<  1000 Mbps TBI   */
-+	E_ENET_MODE_RTBI_1000         = (E_ENET_IF_RTBI  | E_ENET_SPEED_1000),
-+		/**<  1000 Mbps RTBI  */
-+	E_ENET_MODE_SGMII_10          = (E_ENET_IF_SGMII | E_ENET_SPEED_10),
-+		/**< 10 Mbps SGMII with auto-negotiation between MAC and
-+		SGMII phy according to Cisco SGMII specification */
-+	E_ENET_MODE_SGMII_100         = (E_ENET_IF_SGMII | E_ENET_SPEED_100),
-+		/**< 100 Mbps SGMII with auto-negotiation between MAC and
-+		SGMII phy according to Cisco SGMII specification */
-+	E_ENET_MODE_SGMII_1000        = (E_ENET_IF_SGMII | E_ENET_SPEED_1000),
-+		/**< 1000 Mbps SGMII with auto-negotiation between MAC and
-+		SGMII phy according to Cisco SGMII specification */
-+	E_ENET_MODE_SGMII_BASEX_10    = (ENET_IF_SGMII_BASEX | E_ENET_IF_SGMII
-+		| E_ENET_SPEED_10),
-+		/**< 10 Mbps SGMII with 1000BaseX auto-negotiation between
-+		MAC and SGMII phy or backplane */
-+	E_ENET_MODE_SGMII_BASEX_100   = (ENET_IF_SGMII_BASEX | E_ENET_IF_SGMII
-+		| E_ENET_SPEED_100),
-+		/**< 100 Mbps SGMII with 1000BaseX auto-negotiation between
-+		MAC and SGMII phy or backplane */
-+	E_ENET_MODE_SGMII_BASEX_1000  = (ENET_IF_SGMII_BASEX | E_ENET_IF_SGMII
-+		| E_ENET_SPEED_1000),
-+		/**< 1000 Mbps SGMII with 1000BaseX auto-negotiation between
-+		MAC and SGMII phy or backplane */
-+	E_ENET_MODE_QSGMII_1000       = (E_ENET_IF_QSGMII | E_ENET_SPEED_1000),
-+		/**< 1000 Mbps QSGMII with auto-negotiation between MAC and
-+		QSGMII phy according to Cisco QSGMII specification */
-+	E_ENET_MODE_QSGMII_BASEX_1000 = (ENET_IF_SGMII_BASEX | E_ENET_IF_QSGMII
-+		| E_ENET_SPEED_1000),
-+		/**< 1000 Mbps QSGMII with 1000BaseX auto-negotiation between
-+		MAC and QSGMII phy or backplane */
-+	E_ENET_MODE_XGMII_10000       = (E_ENET_IF_XGMII | E_ENET_SPEED_10000),
-+		/**< 10000 Mbps XGMII */
-+	E_ENET_MODE_XFI_10000         = (E_ENET_IF_XFI   | E_ENET_SPEED_10000)
-+		/**< 10000 Mbps XFI */
-+};
-+
-+enum fmam_mac_statistics_level {
-+	E_FMAN_MAC_NONE_STATISTICS,	/**< No statistics */
-+	E_FMAN_MAC_PARTIAL_STATISTICS,	/**< Only error counters are available;
-+					Optimized for performance */
-+	E_FMAN_MAC_FULL_STATISTICS	/**< All counters available; Not
-+					optimized for performance */
-+};
-+
-+#define _MAKE_ENET_MODE(_interface, _speed) (enum enet_mode)((_interface) \
-+	| (_speed))
-+
-+#define _ENET_INTERFACE_FROM_MODE(mode) (enum enet_interface) \
-+	((mode) & 0x0FFF0000)
-+#define _ENET_SPEED_FROM_MODE(mode) (enum enet_speed)((mode) & 0x0000FFFF)
-+#define _ENET_ADDR_TO_UINT64(_enet_addr)		\
-+	(uint64_t)(((uint64_t)(_enet_addr)[0] << 40) |	\
-+		((uint64_t)(_enet_addr)[1] << 32) |	\
-+		((uint64_t)(_enet_addr)[2] << 24) |	\
-+		((uint64_t)(_enet_addr)[3] << 16) |	\
-+		((uint64_t)(_enet_addr)[4] << 8) |	\
-+		((uint64_t)(_enet_addr)[5]))
-+
-+#define _MAKE_ENET_ADDR_FROM_UINT64(_addr64, _enet_addr)		\
-+	do {								\
-+		int i;							\
-+		for (i = 0; i < ENET_NUM_OCTETS_PER_ADDRESS; i++)	\
-+			(_enet_addr)[i] = (uint8_t)((_addr64) >> ((5-i)*8));\
-+	} while (0)
-+
-+#endif /* __FSL_ENET_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman.h
-@@ -0,0 +1,825 @@
-+/*
-+ * Copyright 2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __FSL_FMAN_H
-+#define __FSL_FMAN_H
-+
-+#include "common/general.h"
-+
-+struct fman_ext_pool_params {
-+	uint8_t                 id;    /**< External buffer pool id */
-+	uint16_t                size;  /**< External buffer pool buffer size */
-+};
-+
-+struct fman_ext_pools {
-+	uint8_t num_pools_used;        /**< Number of pools use by this port */
-+	struct fman_ext_pool_params *ext_buf_pool;
-+					/**< Parameters for each port */
-+};
-+
-+struct fman_backup_bm_pools {
-+	uint8_t		 num_backup_pools; /**< Number of BM backup pools -
-+					must be smaller than the total number
-+					of pools defined for the specified
-+					port.*/
-+	uint8_t		*pool_ids;      /**< numOfBackupPools pool id's,
-+					specifying which pools should be used
-+					only as backup. Pool id's specified
-+					here must be a subset of the pools
-+					used by the specified port.*/
-+};
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining BM pool depletion criteria
-+*//***************************************************************************/
-+struct fman_buf_pool_depletion {
-+	bool buf_pool_depletion_enabled;
-+	bool pools_grp_mode_enable;    /**< select mode in which pause frames
-+					will be sent after a number of pools
-+					(all together!) are depleted */
-+	uint8_t num_pools;             /**< the number of depleted pools that
-+					will invoke pause frames transmission.
-+					*/
-+	bool *pools_to_consider;       /**< For each pool, TRUE if it should be
-+					considered for depletion (Note - this
-+					pool must be used by this port!). */
-+	bool single_pool_mode_enable;  /**< select mode in which pause frames
-+					will be sent after a single-pool
-+					is depleted; */
-+	bool *pools_to_consider_for_single_mode;
-+				       /**< For each pool, TRUE if it should be
-+					considered for depletion (Note - this
-+					pool must be used by this port!) */
-+	bool has_pfc_priorities;
-+	bool *pfc_priorities_en;       /**< This field is used by the MAC as
-+					the Priority Enable Vector in the PFC
-+					frame which is transmitted */
-+};
-+
-+/**************************************************************************//**
-+ @Description   Enum for defining port DMA swap mode
-+*//***************************************************************************/
-+enum fman_dma_swap_option {
-+	FMAN_DMA_NO_SWP,           /**< No swap, transfer data as is.*/
-+	FMAN_DMA_SWP_PPC_LE,       /**< The transferred data should be swapped
-+					in PowerPc Little Endian mode. */
-+	FMAN_DMA_SWP_BE            /**< The transferred data should be swapped
-+					in Big Endian mode */
-+};
-+
-+/**************************************************************************//**
-+ @Description   Enum for defining port DMA cache attributes
-+*//***************************************************************************/
-+enum fman_dma_cache_option {
-+	FMAN_DMA_NO_STASH = 0,     /**< Cacheable, no Allocate (No Stashing) */
-+	FMAN_DMA_STASH = 1         /**< Cacheable and Allocate (Stashing on) */
-+};
-+
-+typedef struct t_FmPrsResult fm_prs_result_t;
-+typedef enum e_EnetMode enet_mode_t;
-+typedef t_Handle handle_t;
-+
-+struct fman_revision_info {
-+	uint8_t         majorRev;               /**< Major revision */
-+	uint8_t         minorRev;               /**< Minor revision */
-+};
-+
-+/* sizes */
-+#define CAPWAP_FRAG_EXTRA_SPACE                 32
-+#define OFFSET_UNITS                            16
-+#define MAX_INT_OFFSET                          240
-+#define MAX_IC_SIZE                             256
-+#define MAX_EXT_OFFSET                          496
-+#define MAX_EXT_BUFFER_OFFSET                   511
-+
-+/**************************************************************************
-+ @Description       Memory Mapped Registers
-+***************************************************************************/
-+#define FMAN_LIODN_TBL	64	/* size of LIODN table */
-+
-+struct fman_fpm_regs {
-+	uint32_t fmfp_tnc;	/**< FPM TNUM Control 0x00 */
-+	uint32_t fmfp_prc;	/**< FPM Port_ID FmCtl Association 0x04 */
-+	uint32_t fmfp_brkc;		/**< FPM Breakpoint Control 0x08 */
-+	uint32_t fmfp_mxd;	/**< FPM Flush Control 0x0c */
-+	uint32_t fmfp_dist1;	/**< FPM Dispatch Thresholds1 0x10 */
-+	uint32_t fmfp_dist2;	/**< FPM Dispatch Thresholds2 0x14 */
-+	uint32_t fm_epi;	/**< FM Error Pending Interrupts 0x18 */
-+	uint32_t fm_rie;	/**< FM Error Interrupt Enable 0x1c */
-+	uint32_t fmfp_fcev[4];	/**< FPM FMan-Controller Event 1-4 0x20-0x2f */
-+	uint32_t res0030[4];	/**< res 0x30 - 0x3f */
-+	uint32_t fmfp_cee[4];	/**< PM FMan-Controller Event 1-4 0x40-0x4f */
-+	uint32_t res0050[4];	/**< res 0x50-0x5f */
-+	uint32_t fmfp_tsc1;	/**< FPM TimeStamp Control1 0x60 */
-+	uint32_t fmfp_tsc2;	/**< FPM TimeStamp Control2 0x64 */
-+	uint32_t fmfp_tsp;	/**< FPM Time Stamp 0x68 */
-+	uint32_t fmfp_tsf;	/**< FPM Time Stamp Fraction 0x6c */
-+	uint32_t fm_rcr;	/**< FM Rams Control 0x70 */
-+	uint32_t fmfp_extc;	/**< FPM External Requests Control 0x74 */
-+	uint32_t fmfp_ext1;	/**< FPM External Requests Config1 0x78 */
-+	uint32_t fmfp_ext2;	/**< FPM External Requests Config2 0x7c */
-+	uint32_t fmfp_drd[16];	/**< FPM Data_Ram Data 0-15 0x80 - 0xbf */
-+	uint32_t fmfp_dra;	/**< FPM Data Ram Access 0xc0 */
-+	uint32_t fm_ip_rev_1;	/**< FM IP Block Revision 1 0xc4 */
-+	uint32_t fm_ip_rev_2;	/**< FM IP Block Revision 2 0xc8 */
-+	uint32_t fm_rstc;	/**< FM Reset Command 0xcc */
-+	uint32_t fm_cld;	/**< FM Classifier Debug 0xd0 */
-+	uint32_t fm_npi;	/**< FM Normal Pending Interrupts 0xd4 */
-+	uint32_t fmfp_exte;	/**< FPM External Requests Enable 0xd8 */
-+	uint32_t fmfp_ee;	/**< FPM Event & Mask 0xdc */
-+	uint32_t fmfp_cev[4];	/**< FPM CPU Event 1-4 0xe0-0xef */
-+	uint32_t res00f0[4];	/**< res 0xf0-0xff */
-+	uint32_t fmfp_ps[64];	/**< FPM Port Status 0x100-0x1ff */
-+	uint32_t fmfp_clfabc;	/**< FPM CLFABC 0x200 */
-+	uint32_t fmfp_clfcc;	/**< FPM CLFCC 0x204 */
-+	uint32_t fmfp_clfaval;	/**< FPM CLFAVAL 0x208 */
-+	uint32_t fmfp_clfbval;	/**< FPM CLFBVAL 0x20c */
-+	uint32_t fmfp_clfcval;	/**< FPM CLFCVAL 0x210 */
-+	uint32_t fmfp_clfamsk;	/**< FPM CLFAMSK 0x214 */
-+	uint32_t fmfp_clfbmsk;	/**< FPM CLFBMSK 0x218 */
-+	uint32_t fmfp_clfcmsk;	/**< FPM CLFCMSK 0x21c */
-+	uint32_t fmfp_clfamc;	/**< FPM CLFAMC 0x220 */
-+	uint32_t fmfp_clfbmc;	/**< FPM CLFBMC 0x224 */
-+	uint32_t fmfp_clfcmc;	/**< FPM CLFCMC 0x228 */
-+	uint32_t fmfp_decceh;	/**< FPM DECCEH 0x22c */
-+	uint32_t res0230[116];	/**< res 0x230 - 0x3ff */
-+	uint32_t fmfp_ts[128];	/**< 0x400: FPM Task Status 0x400 - 0x5ff */
-+	uint32_t res0600[0x400 - 384];
-+};
-+
-+struct fman_bmi_regs {
-+	uint32_t fmbm_init; /**< BMI Initialization 0x00 */
-+	uint32_t fmbm_cfg1; /**< BMI Configuration 1 0x04 */
-+	uint32_t fmbm_cfg2; /**< BMI Configuration 2 0x08 */
-+	uint32_t res000c[5]; /**< 0x0c - 0x1f */
-+	uint32_t fmbm_ievr; /**< Interrupt Event Register 0x20 */
-+	uint32_t fmbm_ier; /**< Interrupt Enable Register 0x24 */
-+	uint32_t fmbm_ifr; /**< Interrupt Force Register 0x28 */
-+	uint32_t res002c[5]; /**< 0x2c - 0x3f */
-+	uint32_t fmbm_arb[8]; /**< BMI Arbitration 0x40 - 0x5f */
-+	uint32_t res0060[12]; /**<0x60 - 0x8f */
-+	uint32_t fmbm_dtc[3]; /**< Debug Trap Counter 0x90 - 0x9b */
-+	uint32_t res009c; /**< 0x9c */
-+	uint32_t fmbm_dcv[3][4]; /**< Debug Compare val 0xa0-0xcf */
-+	uint32_t fmbm_dcm[3][4]; /**< Debug Compare Mask 0xd0-0xff */
-+	uint32_t fmbm_gde; /**< BMI Global Debug Enable 0x100 */
-+	uint32_t fmbm_pp[63]; /**< BMI Port Parameters 0x104 - 0x1ff */
-+	uint32_t res0200; /**< 0x200 */
-+	uint32_t fmbm_pfs[63]; /**< BMI Port FIFO Size 0x204 - 0x2ff */
-+	uint32_t res0300; /**< 0x300 */
-+	uint32_t fmbm_spliodn[63]; /**< Port Partition ID 0x304 - 0x3ff */
-+};
-+
-+struct fman_qmi_regs {
-+	uint32_t fmqm_gc; /**< General Configuration Register 0x00 */
-+	uint32_t res0004; /**< 0x04 */
-+	uint32_t fmqm_eie; /**< Error Interrupt Event Register 0x08 */
-+	uint32_t fmqm_eien; /**< Error Interrupt Enable Register 0x0c */
-+	uint32_t fmqm_eif; /**< Error Interrupt Force Register 0x10 */
-+	uint32_t fmqm_ie; /**< Interrupt Event Register 0x14 */
-+	uint32_t fmqm_ien; /**< Interrupt Enable Register 0x18 */
-+	uint32_t fmqm_if; /**< Interrupt Force Register 0x1c */
-+	uint32_t fmqm_gs; /**< Global Status Register 0x20 */
-+	uint32_t fmqm_ts; /**< Task Status Register 0x24 */
-+	uint32_t fmqm_etfc; /**< Enqueue Total Frame Counter 0x28 */
-+	uint32_t fmqm_dtfc; /**< Dequeue Total Frame Counter 0x2c */
-+	uint32_t fmqm_dc0; /**< Dequeue Counter 0 0x30 */
-+	uint32_t fmqm_dc1; /**< Dequeue Counter 1 0x34 */
-+	uint32_t fmqm_dc2; /**< Dequeue Counter 2 0x38 */
-+	uint32_t fmqm_dc3; /**< Dequeue Counter 3 0x3c */
-+	uint32_t fmqm_dfdc; /**< Dequeue FQID from Default Counter 0x40 */
-+	uint32_t fmqm_dfcc; /**< Dequeue FQID from Context Counter 0x44 */
-+	uint32_t fmqm_dffc; /**< Dequeue FQID from FD Counter 0x48 */
-+	uint32_t fmqm_dcc; /**< Dequeue Confirm Counter 0x4c */
-+	uint32_t res0050[7]; /**< 0x50 - 0x6b */
-+	uint32_t fmqm_tapc; /**< Tnum Aging Period Control 0x6c */
-+	uint32_t fmqm_dmcvc; /**< Dequeue MAC Command Valid Counter 0x70 */
-+	uint32_t fmqm_difdcc; /**< Dequeue Invalid FD Command Counter 0x74 */
-+	uint32_t fmqm_da1v; /**< Dequeue A1 Valid Counter 0x78 */
-+	uint32_t res007c; /**< 0x7c */
-+	uint32_t fmqm_dtc; /**< 0x80 Debug Trap Counter 0x80 */
-+	uint32_t fmqm_efddd; /**< 0x84 Enqueue Frame desc Dynamic dbg 0x84 */
-+	uint32_t res0088[2]; /**< 0x88 - 0x8f */
-+	struct {
-+		uint32_t fmqm_dtcfg1; /**< 0x90 dbg trap cfg 1 Register 0x00 */
-+		uint32_t fmqm_dtval1; /**< Debug Trap Value 1 Register 0x04 */
-+		uint32_t fmqm_dtm1; /**< Debug Trap Mask 1 Register 0x08 */
-+		uint32_t fmqm_dtc1; /**< Debug Trap Counter 1 Register 0x0c */
-+		uint32_t fmqm_dtcfg2; /**< dbg Trap cfg 2 Register 0x10 */
-+		uint32_t fmqm_dtval2; /**< Debug Trap Value 2 Register 0x14 */
-+		uint32_t fmqm_dtm2; /**< Debug Trap Mask 2 Register 0x18 */
-+		uint32_t res001c; /**< 0x1c */
-+	} dbg_traps[3]; /**< 0x90 - 0xef */
-+	uint8_t res00f0[0x400 - 0xf0]; /**< 0xf0 - 0x3ff */
-+};
-+
-+struct fman_dma_regs {
-+	uint32_t fmdmsr; /**< FM DMA status register 0x00 */
-+	uint32_t fmdmmr; /**< FM DMA mode register 0x04 */
-+	uint32_t fmdmtr; /**< FM DMA bus threshold register 0x08 */
-+	uint32_t fmdmhy; /**< FM DMA bus hysteresis register 0x0c */
-+	uint32_t fmdmsetr; /**< FM DMA SOS emergency Threshold Register 0x10 */
-+	uint32_t fmdmtah; /**< FM DMA transfer bus address high reg 0x14 */
-+	uint32_t fmdmtal; /**< FM DMA transfer bus address low reg 0x18 */
-+	uint32_t fmdmtcid; /**< FM DMA transfer bus communication ID reg 0x1c */
-+	uint32_t fmdmra; /**< FM DMA bus internal ram address register 0x20 */
-+	uint32_t fmdmrd; /**< FM DMA bus internal ram data register 0x24 */
-+	uint32_t fmdmwcr; /**< FM DMA CAM watchdog counter value 0x28 */
-+	uint32_t fmdmebcr; /**< FM DMA CAM base in MURAM register 0x2c */
-+	uint32_t fmdmccqdr; /**< FM DMA CAM and CMD Queue Debug reg 0x30 */
-+	uint32_t fmdmccqvr1; /**< FM DMA CAM and CMD Queue Value reg #1 0x34 */
-+	uint32_t fmdmccqvr2; /**< FM DMA CAM and CMD Queue Value reg #2 0x38 */
-+	uint32_t fmdmcqvr3; /**< FM DMA CMD Queue Value register #3 0x3c */
-+	uint32_t fmdmcqvr4; /**< FM DMA CMD Queue Value register #4 0x40 */
-+	uint32_t fmdmcqvr5; /**< FM DMA CMD Queue Value register #5 0x44 */
-+	uint32_t fmdmsefrc; /**< FM DMA Semaphore Entry Full Reject Cntr 0x48 */
-+	uint32_t fmdmsqfrc; /**< FM DMA Semaphore Queue Full Reject Cntr 0x4c */
-+	uint32_t fmdmssrc; /**< FM DMA Semaphore SYNC Reject Counter 0x50 */
-+	uint32_t fmdmdcr;  /**< FM DMA Debug Counter 0x54 */
-+	uint32_t fmdmemsr; /**< FM DMA Emergency Smoother Register 0x58 */
-+	uint32_t res005c; /**< 0x5c */
-+	uint32_t fmdmplr[FMAN_LIODN_TBL / 2]; /**< DMA LIODN regs 0x60-0xdf */
-+	uint32_t res00e0[0x400 - 56];
-+};
-+
-+struct fman_rg {
-+	struct fman_fpm_regs *fpm_rg;
-+	struct fman_dma_regs *dma_rg;
-+	struct fman_bmi_regs *bmi_rg;
-+	struct fman_qmi_regs *qmi_rg;
-+};
-+
-+enum fman_dma_cache_override {
-+	E_FMAN_DMA_NO_CACHE_OR = 0, /**< No override of the Cache field */
-+	E_FMAN_DMA_NO_STASH_DATA, /**< No data stashing in system level cache */
-+	E_FMAN_DMA_MAY_STASH_DATA, /**< Stashing allowed in sys level cache */
-+	E_FMAN_DMA_STASH_DATA /**< Stashing performed in system level cache */
-+};
-+
-+enum fman_dma_aid_mode {
-+	E_FMAN_DMA_AID_OUT_PORT_ID = 0,           /**< 4 LSB of PORT_ID */
-+	E_FMAN_DMA_AID_OUT_TNUM                   /**< 4 LSB of TNUM */
-+};
-+
-+enum fman_dma_dbg_cnt_mode {
-+	E_FMAN_DMA_DBG_NO_CNT = 0, /**< No counting */
-+	E_FMAN_DMA_DBG_CNT_DONE, /**< Count DONE commands */
-+	E_FMAN_DMA_DBG_CNT_COMM_Q_EM, /**< command Q emergency signal */
-+	E_FMAN_DMA_DBG_CNT_INT_READ_EM, /**< Read buf emergency signal */
-+	E_FMAN_DMA_DBG_CNT_INT_WRITE_EM, /**< Write buf emergency signal */
-+	E_FMAN_DMA_DBG_CNT_FPM_WAIT, /**< FPM WAIT signal */
-+	E_FMAN_DMA_DBG_CNT_SIGLE_BIT_ECC, /**< Single bit ECC errors */
-+	E_FMAN_DMA_DBG_CNT_RAW_WAR_PROT /**< RAW & WAR protection counter */
-+};
-+
-+enum fman_dma_emergency_level {
-+	E_FMAN_DMA_EM_EBS = 0, /**< EBS emergency */
-+	E_FMAN_DMA_EM_SOS /**< SOS emergency */
-+};
-+
-+enum fman_catastrophic_err {
-+	E_FMAN_CATAST_ERR_STALL_PORT = 0, /**< Port_ID stalled reset required */
-+	E_FMAN_CATAST_ERR_STALL_TASK /**< Only erroneous task is stalled */
-+};
-+
-+enum fman_dma_err {
-+	E_FMAN_DMA_ERR_CATASTROPHIC = 0, /**< Catastrophic DMA error */
-+	E_FMAN_DMA_ERR_REPORT /**< Reported DMA error */
-+};
-+
-+struct fman_cfg {
-+	uint16_t	liodn_bs_pr_port[FMAN_LIODN_TBL];/* base per port */
-+	bool		en_counters;
-+	uint8_t		disp_limit_tsh;
-+	uint8_t		prs_disp_tsh;
-+	uint8_t		plcr_disp_tsh;
-+	uint8_t		kg_disp_tsh;
-+	uint8_t		bmi_disp_tsh;
-+	uint8_t		qmi_enq_disp_tsh;
-+	uint8_t		qmi_deq_disp_tsh;
-+	uint8_t		fm_ctl1_disp_tsh;
-+	uint8_t		fm_ctl2_disp_tsh;
-+	enum fman_dma_cache_override	dma_cache_override;
-+	enum fman_dma_aid_mode		dma_aid_mode;
-+	bool		dma_aid_override;
-+	uint8_t		dma_axi_dbg_num_of_beats;
-+	uint8_t		dma_cam_num_of_entries;
-+	uint32_t	dma_watchdog;
-+	uint8_t		dma_comm_qtsh_asrt_emer;
-+	uint8_t		dma_write_buf_tsh_asrt_emer;
-+	uint8_t		dma_read_buf_tsh_asrt_emer;
-+	uint8_t		dma_comm_qtsh_clr_emer;
-+	uint8_t		dma_write_buf_tsh_clr_emer;
-+	uint8_t		dma_read_buf_tsh_clr_emer;
-+	uint32_t	dma_sos_emergency;
-+	enum fman_dma_dbg_cnt_mode	dma_dbg_cnt_mode;
-+	bool		dma_stop_on_bus_error;
-+	bool		dma_en_emergency;
-+	uint32_t	dma_emergency_bus_select;
-+	enum fman_dma_emergency_level	dma_emergency_level;
-+	bool		dma_en_emergency_smoother;
-+	uint32_t	dma_emergency_switch_counter;
-+	bool		halt_on_external_activ;
-+	bool		halt_on_unrecov_ecc_err;
-+	enum fman_catastrophic_err	catastrophic_err;
-+	enum fman_dma_err		dma_err;
-+	bool		en_muram_test_mode;
-+	bool		en_iram_test_mode;
-+	bool		external_ecc_rams_enable;
-+	uint16_t	tnum_aging_period;
-+	uint32_t	exceptions;
-+	uint16_t	clk_freq;
-+	bool		pedantic_dma;
-+	uint32_t	cam_base_addr;
-+	uint32_t	fifo_base_addr;
-+	uint32_t	total_fifo_size;
-+	uint8_t		total_num_of_tasks;
-+	bool		qmi_deq_option_support;
-+	uint32_t	qmi_def_tnums_thresh;
-+	bool		fman_partition_array;
-+	uint8_t		num_of_fman_ctrl_evnt_regs;
-+};
-+
-+/**************************************************************************//**
-+ @Description       Exceptions
-+*//***************************************************************************/
-+#define FMAN_EX_DMA_BUS_ERROR			0x80000000
-+#define FMAN_EX_DMA_READ_ECC			0x40000000
-+#define FMAN_EX_DMA_SYSTEM_WRITE_ECC		0x20000000
-+#define FMAN_EX_DMA_FM_WRITE_ECC		0x10000000
-+#define FMAN_EX_FPM_STALL_ON_TASKS		0x08000000
-+#define FMAN_EX_FPM_SINGLE_ECC			0x04000000
-+#define FMAN_EX_FPM_DOUBLE_ECC			0x02000000
-+#define FMAN_EX_QMI_SINGLE_ECC			0x01000000
-+#define FMAN_EX_QMI_DEQ_FROM_UNKNOWN_PORTID	0x00800000
-+#define FMAN_EX_QMI_DOUBLE_ECC			0x00400000
-+#define FMAN_EX_BMI_LIST_RAM_ECC		0x00200000
-+#define FMAN_EX_BMI_PIPELINE_ECC		0x00100000
-+#define FMAN_EX_BMI_STATISTICS_RAM_ECC		0x00080000
-+#define FMAN_EX_IRAM_ECC			0x00040000
-+#define FMAN_EX_NURAM_ECC			0x00020000
-+#define FMAN_EX_BMI_DISPATCH_RAM_ECC		0x00010000
-+
-+enum fman_exceptions {
-+	E_FMAN_EX_DMA_BUS_ERROR = 0, /**< DMA bus error. */
-+	E_FMAN_EX_DMA_READ_ECC, /**< Read Buffer ECC error */
-+	E_FMAN_EX_DMA_SYSTEM_WRITE_ECC, /**< Write Buffer ECC err on sys side */
-+	E_FMAN_EX_DMA_FM_WRITE_ECC, /**< Write Buffer ECC error on FM side */
-+	E_FMAN_EX_FPM_STALL_ON_TASKS, /**< Stall of tasks on FPM */
-+	E_FMAN_EX_FPM_SINGLE_ECC, /**< Single ECC on FPM. */
-+	E_FMAN_EX_FPM_DOUBLE_ECC, /**< Double ECC error on FPM ram access */
-+	E_FMAN_EX_QMI_SINGLE_ECC, /**< Single ECC on QMI. */
-+	E_FMAN_EX_QMI_DOUBLE_ECC, /**< Double bit ECC occurred on QMI */
-+	E_FMAN_EX_QMI_DEQ_FROM_UNKNOWN_PORTID,/**< DeQ from unknown port id */
-+	E_FMAN_EX_BMI_LIST_RAM_ECC, /**< Linked List RAM ECC error */
-+	E_FMAN_EX_BMI_STORAGE_PROFILE_ECC, /**< storage profile */
-+	E_FMAN_EX_BMI_STATISTICS_RAM_ECC, /**< Statistics RAM ECC Err Enable */
-+	E_FMAN_EX_BMI_DISPATCH_RAM_ECC, /**< Dispatch RAM ECC Error Enable */
-+	E_FMAN_EX_IRAM_ECC, /**< Double bit ECC occurred on IRAM*/
-+	E_FMAN_EX_MURAM_ECC /**< Double bit ECC occurred on MURAM*/
-+};
-+
-+enum fman_counters {
-+	E_FMAN_COUNTERS_ENQ_TOTAL_FRAME = 0, /**< QMI tot enQ frames counter */
-+	E_FMAN_COUNTERS_DEQ_TOTAL_FRAME, /**< QMI tot deQ frames counter */
-+	E_FMAN_COUNTERS_DEQ_0, /**< QMI 0 frames from QMan counter */
-+	E_FMAN_COUNTERS_DEQ_1, /**< QMI 1 frames from QMan counter */
-+	E_FMAN_COUNTERS_DEQ_2, /**< QMI 2 frames from QMan counter */
-+	E_FMAN_COUNTERS_DEQ_3, /**< QMI 3 frames from QMan counter */
-+	E_FMAN_COUNTERS_DEQ_FROM_DEFAULT, /**< QMI deQ from dflt queue cntr */
-+	E_FMAN_COUNTERS_DEQ_FROM_CONTEXT, /**< QMI deQ from FQ context cntr */
-+	E_FMAN_COUNTERS_DEQ_FROM_FD, /**< QMI deQ from FD command field cntr */
-+	E_FMAN_COUNTERS_DEQ_CONFIRM, /**< QMI dequeue confirm counter */
-+	E_FMAN_COUNTERS_SEMAPHOR_ENTRY_FULL_REJECT, /**< DMA full entry cntr */
-+	E_FMAN_COUNTERS_SEMAPHOR_QUEUE_FULL_REJECT, /**< DMA full CAM Q cntr */
-+	E_FMAN_COUNTERS_SEMAPHOR_SYNC_REJECT /**< DMA sync counter */
-+};
-+
-+#define FPM_PRT_FM_CTL1	0x00000001
-+#define FPM_PRT_FM_CTL2	0x00000002
-+
-+/**************************************************************************//**
-+ @Description       DMA definitions
-+*//***************************************************************************/
-+
-+/* masks */
-+#define DMA_MODE_AID_OR			0x20000000
-+#define DMA_MODE_SBER			0x10000000
-+#define DMA_MODE_BER			0x00200000
-+#define DMA_MODE_EB             0x00100000
-+#define DMA_MODE_ECC			0x00000020
-+#define DMA_MODE_PRIVILEGE_PROT	0x00001000
-+#define DMA_MODE_SECURE_PROT	0x00000800
-+#define DMA_MODE_EMER_READ		0x00080000
-+#define DMA_MODE_EMER_WRITE		0x00040000
-+#define DMA_MODE_CACHE_OR_MASK  0xC0000000
-+#define DMA_MODE_CEN_MASK       0x0000E000
-+#define DMA_MODE_DBG_MASK       0x00000380
-+#define DMA_MODE_AXI_DBG_MASK   0x0F000000
-+
-+#define DMA_EMSR_EMSTR_MASK         0x0000FFFF
-+
-+#define DMA_TRANSFER_PORTID_MASK	0xFF000000
-+#define DMA_TRANSFER_TNUM_MASK		0x00FF0000
-+#define DMA_TRANSFER_LIODN_MASK		0x00000FFF
-+
-+#define DMA_HIGH_LIODN_MASK		0x0FFF0000
-+#define DMA_LOW_LIODN_MASK		0x00000FFF
-+
-+#define DMA_STATUS_CMD_QUEUE_NOT_EMPTY	0x10000000
-+#define DMA_STATUS_BUS_ERR		0x08000000
-+#define DMA_STATUS_READ_ECC		0x04000000
-+#define DMA_STATUS_SYSTEM_WRITE_ECC	0x02000000
-+#define DMA_STATUS_FM_WRITE_ECC		0x01000000
-+#define DMA_STATUS_SYSTEM_DPEXT_ECC	0x00800000
-+#define DMA_STATUS_FM_DPEXT_ECC		0x00400000
-+#define DMA_STATUS_SYSTEM_DPDAT_ECC	0x00200000
-+#define DMA_STATUS_FM_DPDAT_ECC		0x00100000
-+#define DMA_STATUS_FM_SPDAT_ECC		0x00080000
-+
-+#define FM_LIODN_BASE_MASK		0x00000FFF
-+
-+/* shifts */
-+#define DMA_MODE_CACHE_OR_SHIFT			30
-+#define DMA_MODE_BUS_PRI_SHIFT			16
-+#define DMA_MODE_AXI_DBG_SHIFT			24
-+#define DMA_MODE_CEN_SHIFT			13
-+#define DMA_MODE_BUS_PROT_SHIFT			10
-+#define DMA_MODE_DBG_SHIFT			7
-+#define DMA_MODE_EMER_LVL_SHIFT			6
-+#define DMA_MODE_AID_MODE_SHIFT			4
-+#define DMA_MODE_MAX_AXI_DBG_NUM_OF_BEATS	16
-+#define DMA_MODE_MAX_CAM_NUM_OF_ENTRIES		32
-+
-+#define DMA_THRESH_COMMQ_SHIFT			24
-+#define DMA_THRESH_READ_INT_BUF_SHIFT		16
-+
-+#define DMA_LIODN_SHIFT				16
-+
-+#define DMA_TRANSFER_PORTID_SHIFT		24
-+#define DMA_TRANSFER_TNUM_SHIFT			16
-+
-+/* sizes */
-+#define DMA_MAX_WATCHDOG			0xffffffff
-+
-+/* others */
-+#define DMA_CAM_SIZEOF_ENTRY			0x40
-+#define DMA_CAM_ALIGN				0x1000
-+#define DMA_CAM_UNITS				8
-+
-+/**************************************************************************//**
-+ @Description       General defines
-+*//***************************************************************************/
-+
-+#define FM_DEBUG_STATUS_REGISTER_OFFSET	0x000d1084UL
-+#define FM_UCODE_DEBUG_INSTRUCTION	0x6ffff805UL
-+
-+/**************************************************************************//**
-+ @Description       FPM defines
-+*//***************************************************************************/
-+
-+/* masks */
-+#define FPM_EV_MASK_DOUBLE_ECC		0x80000000
-+#define FPM_EV_MASK_STALL		0x40000000
-+#define FPM_EV_MASK_SINGLE_ECC		0x20000000
-+#define FPM_EV_MASK_RELEASE_FM		0x00010000
-+#define FPM_EV_MASK_DOUBLE_ECC_EN	0x00008000
-+#define FPM_EV_MASK_STALL_EN		0x00004000
-+#define FPM_EV_MASK_SINGLE_ECC_EN	0x00002000
-+#define FPM_EV_MASK_EXTERNAL_HALT	0x00000008
-+#define FPM_EV_MASK_ECC_ERR_HALT	0x00000004
-+
-+#define FPM_RAM_RAMS_ECC_EN		0x80000000
-+#define FPM_RAM_IRAM_ECC_EN		0x40000000
-+#define FPM_RAM_MURAM_ECC		0x00008000
-+#define FPM_RAM_IRAM_ECC		0x00004000
-+#define FPM_RAM_MURAM_TEST_ECC		0x20000000
-+#define FPM_RAM_IRAM_TEST_ECC		0x10000000
-+#define FPM_RAM_RAMS_ECC_EN_SRC_SEL	0x08000000
-+
-+#define FPM_IRAM_ECC_ERR_EX_EN		0x00020000
-+#define FPM_MURAM_ECC_ERR_EX_EN		0x00040000
-+
-+#define FPM_REV1_MAJOR_MASK		0x0000FF00
-+#define FPM_REV1_MINOR_MASK		0x000000FF
-+
-+#define FPM_REV2_INTEG_MASK		0x00FF0000
-+#define FPM_REV2_ERR_MASK		0x0000FF00
-+#define FPM_REV2_CFG_MASK		0x000000FF
-+
-+#define FPM_TS_FRACTION_MASK		0x0000FFFF
-+#define FPM_TS_CTL_EN			0x80000000
-+
-+#define FPM_PRC_REALSE_STALLED		0x00800000
-+
-+#define FPM_PS_STALLED			0x00800000
-+#define FPM_PS_FM_CTL1_SEL		0x80000000
-+#define FPM_PS_FM_CTL2_SEL		0x40000000
-+#define FPM_PS_FM_CTL_SEL_MASK	(FPM_PS_FM_CTL1_SEL | FPM_PS_FM_CTL2_SEL)
-+
-+#define FPM_RSTC_FM_RESET		0x80000000
-+#define FPM_RSTC_10G0_RESET		0x04000000
-+#define FPM_RSTC_1G0_RESET		0x40000000
-+#define FPM_RSTC_1G1_RESET		0x20000000
-+#define FPM_RSTC_1G2_RESET		0x10000000
-+#define FPM_RSTC_1G3_RESET		0x08000000
-+#define FPM_RSTC_1G4_RESET		0x02000000
-+
-+
-+#define FPM_DISP_LIMIT_MASK             0x1F000000
-+#define FPM_THR1_PRS_MASK               0xFF000000
-+#define FPM_THR1_KG_MASK                0x00FF0000
-+#define FPM_THR1_PLCR_MASK              0x0000FF00
-+#define FPM_THR1_BMI_MASK               0x000000FF
-+
-+#define FPM_THR2_QMI_ENQ_MASK           0xFF000000
-+#define FPM_THR2_QMI_DEQ_MASK           0x000000FF
-+#define FPM_THR2_FM_CTL1_MASK           0x00FF0000
-+#define FPM_THR2_FM_CTL2_MASK           0x0000FF00
-+
-+/* shifts */
-+#define FPM_DISP_LIMIT_SHIFT		24
-+
-+#define FPM_THR1_PRS_SHIFT		24
-+#define FPM_THR1_KG_SHIFT		16
-+#define FPM_THR1_PLCR_SHIFT		8
-+#define FPM_THR1_BMI_SHIFT		0
-+
-+#define FPM_THR2_QMI_ENQ_SHIFT		24
-+#define FPM_THR2_QMI_DEQ_SHIFT		0
-+#define FPM_THR2_FM_CTL1_SHIFT		16
-+#define FPM_THR2_FM_CTL2_SHIFT		8
-+
-+#define FPM_EV_MASK_CAT_ERR_SHIFT	1
-+#define FPM_EV_MASK_DMA_ERR_SHIFT	0
-+
-+#define FPM_REV1_MAJOR_SHIFT		8
-+#define FPM_REV1_MINOR_SHIFT		0
-+
-+#define FPM_REV2_INTEG_SHIFT		16
-+#define FPM_REV2_ERR_SHIFT		8
-+#define FPM_REV2_CFG_SHIFT		0
-+
-+#define FPM_TS_INT_SHIFT		16
-+
-+#define FPM_PORT_FM_CTL_PORTID_SHIFT	24
-+
-+#define FPM_PS_FM_CTL_SEL_SHIFT		30
-+#define FPM_PRC_ORA_FM_CTL_SEL_SHIFT	16
-+
-+#define FPM_DISP_LIMIT_SHIFT            24
-+
-+/* Interrupts defines */
-+#define FPM_EVENT_FM_CTL_0		0x00008000
-+#define FPM_EVENT_FM_CTL		0x0000FF00
-+#define FPM_EVENT_FM_CTL_BRK		0x00000080
-+
-+/* others */
-+#define FPM_MAX_DISP_LIMIT		31
-+#define FPM_RSTC_FM_RESET               0x80000000
-+#define FPM_RSTC_1G0_RESET              0x40000000
-+#define FPM_RSTC_1G1_RESET              0x20000000
-+#define FPM_RSTC_1G2_RESET              0x10000000
-+#define FPM_RSTC_1G3_RESET              0x08000000
-+#define FPM_RSTC_10G0_RESET             0x04000000
-+#define FPM_RSTC_1G4_RESET              0x02000000
-+#define FPM_RSTC_1G5_RESET              0x01000000
-+#define FPM_RSTC_1G6_RESET              0x00800000
-+#define FPM_RSTC_1G7_RESET              0x00400000
-+#define FPM_RSTC_10G1_RESET             0x00200000
-+/**************************************************************************//**
-+ @Description       BMI defines
-+*//***************************************************************************/
-+/* masks */
-+#define BMI_INIT_START				0x80000000
-+#define BMI_ERR_INTR_EN_STORAGE_PROFILE_ECC	0x80000000
-+#define BMI_ERR_INTR_EN_LIST_RAM_ECC		0x40000000
-+#define BMI_ERR_INTR_EN_STATISTICS_RAM_ECC	0x20000000
-+#define BMI_ERR_INTR_EN_DISPATCH_RAM_ECC	0x10000000
-+#define BMI_NUM_OF_TASKS_MASK			0x3F000000
-+#define BMI_NUM_OF_EXTRA_TASKS_MASK		0x000F0000
-+#define BMI_NUM_OF_DMAS_MASK			0x00000F00
-+#define BMI_NUM_OF_EXTRA_DMAS_MASK		0x0000000F
-+#define BMI_FIFO_SIZE_MASK			0x000003FF
-+#define BMI_EXTRA_FIFO_SIZE_MASK		0x03FF0000
-+#define BMI_CFG2_DMAS_MASK			0x0000003F
-+#define BMI_TOTAL_FIFO_SIZE_MASK           0x07FF0000
-+#define BMI_TOTAL_NUM_OF_TASKS_MASK        0x007F0000
-+
-+/* shifts */
-+#define BMI_CFG2_TASKS_SHIFT		16
-+#define BMI_CFG2_DMAS_SHIFT		0
-+#define BMI_CFG1_FIFO_SIZE_SHIFT	16
-+#define BMI_FIFO_SIZE_SHIFT		0
-+#define BMI_EXTRA_FIFO_SIZE_SHIFT	16
-+#define BMI_NUM_OF_TASKS_SHIFT		24
-+#define BMI_EXTRA_NUM_OF_TASKS_SHIFT	16
-+#define BMI_NUM_OF_DMAS_SHIFT		8
-+#define BMI_EXTRA_NUM_OF_DMAS_SHIFT	0
-+
-+/* others */
-+#define BMI_FIFO_ALIGN			0x100
-+#define FMAN_BMI_FIFO_UNITS		0x100
-+
-+
-+/**************************************************************************//**
-+ @Description       QMI defines
-+*//***************************************************************************/
-+/* masks */
-+#define QMI_CFG_ENQ_EN			0x80000000
-+#define QMI_CFG_DEQ_EN			0x40000000
-+#define QMI_CFG_EN_COUNTERS		0x10000000
-+#define QMI_CFG_SOFT_RESET		0x01000000
-+#define QMI_CFG_DEQ_MASK		0x0000003F
-+#define QMI_CFG_ENQ_MASK		0x00003F00
-+
-+#define QMI_ERR_INTR_EN_DOUBLE_ECC	0x80000000
-+#define QMI_ERR_INTR_EN_DEQ_FROM_DEF	0x40000000
-+#define QMI_INTR_EN_SINGLE_ECC		0x80000000
-+
-+/* shifts */
-+#define QMI_CFG_ENQ_SHIFT		8
-+#define QMI_TAPC_TAP			22
-+
-+#define QMI_GS_HALT_NOT_BUSY            0x00000002
-+
-+/**************************************************************************//**
-+ @Description       IRAM defines
-+*//***************************************************************************/
-+/* masks */
-+#define IRAM_IADD_AIE			0x80000000
-+#define IRAM_READY			0x80000000
-+
-+uint32_t fman_get_bmi_err_event(struct fman_bmi_regs *bmi_rg);
-+uint32_t fman_get_qmi_err_event(struct fman_qmi_regs *qmi_rg);
-+uint32_t fman_get_dma_com_id(struct fman_dma_regs *dma_rg);
-+uint64_t fman_get_dma_addr(struct fman_dma_regs *dma_rg);
-+uint32_t fman_get_dma_err_event(struct fman_dma_regs *dma_rg);
-+uint32_t fman_get_fpm_err_event(struct fman_fpm_regs *fpm_rg);
-+uint32_t fman_get_muram_err_event(struct fman_fpm_regs *fpm_rg);
-+uint32_t fman_get_iram_err_event(struct fman_fpm_regs *fpm_rg);
-+uint32_t fman_get_qmi_event(struct fman_qmi_regs *qmi_rg);
-+uint32_t fman_get_fpm_error_interrupts(struct fman_fpm_regs *fpm_rg);
-+uint32_t fman_get_ctrl_intr(struct fman_fpm_regs *fpm_rg,
-+				uint8_t event_reg_id);
-+uint8_t fman_get_qmi_deq_th(struct fman_qmi_regs *qmi_rg);
-+uint8_t fman_get_qmi_enq_th(struct fman_qmi_regs *qmi_rg);
-+uint16_t fman_get_size_of_fifo(struct fman_bmi_regs *bmi_rg, uint8_t port_id);
-+uint32_t fman_get_total_fifo_size(struct fman_bmi_regs *bmi_rg);
-+uint16_t fman_get_size_of_extra_fifo(struct fman_bmi_regs *bmi_rg,
-+				uint8_t port_id);
-+uint8_t fman_get_num_of_tasks(struct fman_bmi_regs *bmi_rg, uint8_t port_id);
-+uint8_t fman_get_num_extra_tasks(struct fman_bmi_regs *bmi_rg,
-+				uint8_t port_id);
-+uint8_t fman_get_num_of_dmas(struct fman_bmi_regs *bmi_rg, uint8_t port_id);
-+uint8_t fman_get_num_extra_dmas(struct fman_bmi_regs *bmi_rg,
-+				uint8_t port_id);
-+uint32_t fman_get_normal_pending(struct fman_fpm_regs *fpm_rg);
-+uint32_t fman_get_controller_event(struct fman_fpm_regs *fpm_rg,
-+					uint8_t reg_id);
-+uint32_t fman_get_error_pending(struct fman_fpm_regs *fpm_rg);
-+void fman_get_revision(struct fman_fpm_regs *fpm_rg, uint8_t *major,
-+				uint8_t *minor);
-+uint32_t fman_get_counter(struct fman_rg *fman_rg,
-+				enum fman_counters reg_name);
-+uint32_t fman_get_dma_status(struct fman_dma_regs *dma_rg);
-+
-+
-+int fman_set_erratum_10gmac_a004_wa(struct fman_fpm_regs *fpm_rg);
-+void fman_set_ctrl_intr(struct fman_fpm_regs *fpm_rg, uint8_t event_reg_id,
-+				uint32_t enable_events);
-+void fman_set_num_of_riscs_per_port(struct fman_fpm_regs *fpm_rg,
-+				uint8_t port_id,
-+				uint8_t num_fman_ctrls,
-+				uint32_t or_fman_ctrl);
-+void fman_set_order_restoration_per_port(struct fman_fpm_regs *fpm_rg,
-+				uint8_t port_id,
-+				bool independent_mode,
-+				bool is_rx_port);
-+void fman_set_qmi_enq_th(struct fman_qmi_regs *qmi_rg, uint8_t val);
-+void fman_set_qmi_deq_th(struct fman_qmi_regs *qmi_rg, uint8_t val);
-+void fman_set_liodn_per_port(struct fman_rg *fman_rg,
-+				uint8_t port_id,
-+				uint16_t liodn_base,
-+				uint16_t liodn_offset);
-+void fman_set_size_of_fifo(struct fman_bmi_regs *bmi_rg,
-+				uint8_t port_id,
-+				uint32_t size_of_fifo,
-+				uint32_t extra_size_of_fifo);
-+void fman_set_num_of_tasks(struct fman_bmi_regs *bmi_rg,
-+				uint8_t port_id,
-+				uint8_t num_of_tasks,
-+				uint8_t num_of_extra_tasks);
-+void fman_set_num_of_open_dmas(struct fman_bmi_regs *bmi_rg,
-+				uint8_t port_id,
-+				uint8_t num_of_open_dmas,
-+				uint8_t num_of_extra_open_dmas,
-+				uint8_t total_num_of_dmas);
-+void fman_set_ports_bandwidth(struct fman_bmi_regs *bmi_rg, uint8_t *weights);
-+int fman_set_exception(struct fman_rg *fman_rg,
-+				enum fman_exceptions exception,
-+				bool enable);
-+void fman_set_dma_emergency(struct fman_dma_regs *dma_rg, bool is_write,
-+				bool enable);
-+void fman_set_dma_ext_bus_pri(struct fman_dma_regs *dma_rg, uint32_t pri);
-+void fman_set_congestion_group_pfc_priority(uint32_t *cpg_rg,
-+                                            uint32_t congestion_group_id,
-+                                            uint8_t piority_bit_map,
-+                                            uint32_t reg_num);
-+
-+
-+void fman_defconfig(struct fman_cfg *cfg, bool is_master);
-+void fman_regconfig(struct fman_rg *fman_rg, struct fman_cfg *cfg);
-+int fman_fpm_init(struct fman_fpm_regs *fpm_rg, struct fman_cfg *cfg);
-+int fman_bmi_init(struct fman_bmi_regs *bmi_rg, struct fman_cfg *cfg);
-+int fman_qmi_init(struct fman_qmi_regs *qmi_rg, struct fman_cfg *cfg);
-+int fman_dma_init(struct fman_dma_regs *dma_rg, struct fman_cfg *cfg);
-+void fman_free_resources(struct fman_rg *fman_rg);
-+int fman_enable(struct fman_rg *fman_rg, struct fman_cfg *cfg);
-+void fman_reset(struct fman_fpm_regs *fpm_rg);
-+void fman_resume(struct fman_fpm_regs *fpm_rg);
-+
-+
-+void fman_enable_time_stamp(struct fman_fpm_regs *fpm_rg,
-+				uint8_t count1ubit,
-+				uint16_t fm_clk_freq);
-+void fman_enable_rams_ecc(struct fman_fpm_regs *fpm_rg);
-+void fman_qmi_disable_dispatch_limit(struct fman_fpm_regs *fpm_rg);
-+void fman_disable_rams_ecc(struct fman_fpm_regs *fpm_rg);
-+void fman_resume_stalled_port(struct fman_fpm_regs *fpm_rg, uint8_t port_id);
-+int fman_reset_mac(struct fman_fpm_regs *fpm_rg, uint8_t macId, bool is_10g);
-+bool fman_is_port_stalled(struct fman_fpm_regs *fpm_rg, uint8_t port_id);
-+bool fman_rams_ecc_is_external_ctl(struct fman_fpm_regs *fpm_rg);
-+bool fman_is_qmi_halt_not_busy_state(struct fman_qmi_regs *qmi_rg);
-+int fman_modify_counter(struct fman_rg *fman_rg,
-+				enum fman_counters reg_name,
-+				uint32_t val);
-+void fman_force_intr(struct fman_rg *fman_rg,
-+				enum fman_exceptions exception);
-+void fman_set_vsp_window(struct fman_bmi_regs *bmi_rg,
-+			    	     uint8_t port_id,
-+				         uint8_t base_storage_profile,
-+				         uint8_t log2_num_of_profiles);
-+
-+/**************************************************************************//**
-+ @Description       default values
-+*//***************************************************************************/
-+#define DEFAULT_CATASTROPHIC_ERR                E_FMAN_CATAST_ERR_STALL_PORT
-+#define DEFAULT_DMA_ERR                         E_FMAN_DMA_ERR_CATASTROPHIC
-+#define DEFAULT_HALT_ON_EXTERNAL_ACTIVATION     FALSE   /* do not change! if changed, must be disabled for rev1 ! */
-+#define DEFAULT_HALT_ON_UNRECOVERABLE_ECC_ERROR FALSE   /* do not change! if changed, must be disabled for rev1 ! */
-+#define DEFAULT_EXTERNAL_ECC_RAMS_ENABLE        FALSE
-+#define DEFAULT_AID_OVERRIDE                    FALSE
-+#define DEFAULT_AID_MODE                        E_FMAN_DMA_AID_OUT_TNUM
-+#define DEFAULT_DMA_COMM_Q_LOW                  0x2A
-+#define DEFAULT_DMA_COMM_Q_HIGH                 0x3F
-+#define DEFAULT_CACHE_OVERRIDE                  E_FMAN_DMA_NO_CACHE_OR
-+#define DEFAULT_DMA_CAM_NUM_OF_ENTRIES          64
-+#define DEFAULT_DMA_DBG_CNT_MODE                E_FMAN_DMA_DBG_NO_CNT
-+#define DEFAULT_DMA_EN_EMERGENCY                FALSE
-+#define DEFAULT_DMA_SOS_EMERGENCY               0
-+#define DEFAULT_DMA_WATCHDOG                    0 /* disabled */
-+#define DEFAULT_DMA_EN_EMERGENCY_SMOOTHER       FALSE
-+#define DEFAULT_DMA_EMERGENCY_SWITCH_COUNTER    0
-+#define DEFAULT_DISP_LIMIT                      0
-+#define DEFAULT_PRS_DISP_TH                     16
-+#define DEFAULT_PLCR_DISP_TH                    16
-+#define DEFAULT_KG_DISP_TH                      16
-+#define DEFAULT_BMI_DISP_TH                     16
-+#define DEFAULT_QMI_ENQ_DISP_TH                 16
-+#define DEFAULT_QMI_DEQ_DISP_TH                 16
-+#define DEFAULT_FM_CTL1_DISP_TH                 16
-+#define DEFAULT_FM_CTL2_DISP_TH                 16
-+#define DEFAULT_TNUM_AGING_PERIOD               4
-+
-+
-+#endif /* __FSL_FMAN_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_dtsec.h
-@@ -0,0 +1,1096 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __FSL_FMAN_DTSEC_H
-+#define __FSL_FMAN_DTSEC_H
-+
-+#include "common/general.h"
-+#include "fsl_enet.h"
-+
-+/**
-+ * DOC: dTSEC Init sequence
-+ *
-+ * To prepare dTSEC block for transfer use the following call sequence:
-+ *
-+ * - fman_dtsec_defconfig() - This step is optional and yet recommended. Its
-+ * use is to obtain the default dTSEC configuration parameters.
-+ *
-+ * - Change dtsec configuration in &dtsec_cfg. This structure will be used
-+ * to customize the dTSEC behavior.
-+ *
-+ * - fman_dtsec_init() - Applies the configuration on dTSEC hardware.  Note that
-+ * dTSEC is initialized while both Tx and Rx are disabled.
-+ *
-+ * - fman_dtsec_set_mac_address() - Set the station address (mac address).
-+ * This is used by dTSEC to match against received packets.
-+ *
-+ * - fman_dtsec_adjust_link() - Set the link speed and duplex parameters
-+ * after the PHY establishes the link.
-+ *
-+ * - dtsec_enable_tx() and dtsec_enable_rx() to enable transmission and
-+ * reception.
-+ */
-+
-+/**
-+ * DOC: dTSEC Graceful stop
-+ *
-+ * To temporary stop dTSEC activity use fman_dtsec_stop_tx() and
-+ * fman_dtsec_stop_rx(). Note that these functions request dTSEC graceful stop
-+ * but return before this stop is complete.  To query for graceful stop
-+ * completion use fman_dtsec_get_event() and check DTSEC_IEVENT_GTSC and
-+ * DTSEC_IEVENT_GRSC bits. Alternatively the dTSEC interrupt mask can be set to
-+ * enable graceful stop interrupts.
-+ *
-+ * To resume operation after graceful stop use fman_dtsec_start_tx() and
-+ * fman_dtsec_start_rx().
-+ */
-+
-+/**
-+ * DOC: dTSEC interrupt handling
-+ *
-+ * This code does not provide an interrupt handler for dTSEC.  Instead this
-+ * handler should be implemented and registered to the operating system by the
-+ * caller.  Some primitives for accessing the event status and mask registers
-+ * are provided.
-+ *
-+ * See "dTSEC Events" section for a list of events that dTSEC can generate.
-+ */
-+
-+/**
-+ * DOC: dTSEC Events
-+ *
-+ * Interrupt events cause dTSEC event bits to be set.  Software may poll the
-+ * event register at any time to check for pending interrupts.  If an event
-+ * occurs and its corresponding enable bit is set in the interrupt mask
-+ * register, the event also causes a hardware interrupt at the PIC.
-+ *
-+ * To poll for event status use the fman_dtsec_get_event() function.
-+ * To configure the interrupt mask use fman_dtsec_enable_interrupt() and
-+ * fman_dtsec_disable_interrupt() functions.
-+ * After servicing a dTSEC interrupt use fman_dtsec_ack_event to reset the
-+ * serviced event bit.
-+ *
-+ * The following events may be signaled by dTSEC hardware:
-+ *
-+ * %DTSEC_IEVENT_BABR - Babbling receive error.  This bit indicates that
-+ * a frame was received with length in excess of the MAC's maximum frame length
-+ * register.
-+ *
-+ * %DTSEC_IEVENT_RXC - Receive control (pause frame) interrupt.  A pause
-+ * control frame was received while Rx pause frame handling is enabled.
-+ * Also see fman_dtsec_handle_rx_pause().
-+ *
-+ * %DTSEC_IEVENT_MSRO - MIB counter overflow.  The count for one of the MIB
-+ * counters has exceeded the size of its register.
-+ *
-+ * %DTSEC_IEVENT_GTSC - Graceful transmit stop complete.  Graceful stop is now
-+ * complete. The transmitter is in a stopped state, in which only pause frames
-+ * can be transmitted.
-+ * Also see fman_dtsec_stop_tx().
-+ *
-+ * %DTSEC_IEVENT_BABT - Babbling transmit error.  The transmitted frame length
-+ * has exceeded the value in the MAC's Maximum Frame Length register.
-+ *
-+ * %DTSEC_IEVENT_TXC - Transmit control (pause frame) interrupt.  his bit
-+ * indicates that a control frame was transmitted.
-+ *
-+ * %DTSEC_IEVENT_TXE - Transmit error.  This bit indicates that an error
-+ * occurred on the transmitted channel.  This bit is set whenever any transmit
-+ * error occurs which causes the dTSEC to discard all or part of a frame
-+ * (LC, CRL, XFUN).
-+ *
-+ * %DTSEC_IEVENT_LC - Late collision.  This bit indicates that a collision
-+ * occurred beyond the collision window (slot time) in half-duplex mode.
-+ * The frame is truncated with a bad CRC and the remainder of the frame
-+ * is discarded.
-+ *
-+ * %DTSEC_IEVENT_CRL - Collision retry limit.  is bit indicates that the number
-+ * of successive transmission collisions has exceeded the MAC's half-duplex
-+ * register's retransmission maximum count.  The frame is discarded without
-+ * being transmitted and transmission of the next frame commences.  This only
-+ * occurs while in half-duplex mode.
-+ * The number of retransmit attempts can be set in
-+ * &dtsec_halfdup_cfg.@retransmit before calling fman_dtsec_init().
-+ *
-+ * %DTSEC_IEVENT_XFUN - Transmit FIFO underrun.  This bit indicates that the
-+ * transmit FIFO became empty before the complete frame was transmitted.
-+ * The frame is truncated with a bad CRC and the remainder of the frame is
-+ * discarded.
-+ *
-+ * %DTSEC_IEVENT_MAG - TBD
-+ *
-+ * %DTSEC_IEVENT_MMRD - MII management read completion.
-+ *
-+ * %DTSEC_IEVENT_MMWR - MII management write completion.
-+ *
-+ * %DTSEC_IEVENT_GRSC - Graceful receive stop complete.  It allows the user to
-+ * know if the system has completed the stop and it is safe to write to receive
-+ * registers (status, control or configuration registers) that are used by the
-+ * system during normal operation.
-+ *
-+ * %DTSEC_IEVENT_TDPE - Internal data error on transmit.  This bit indicates
-+ * that the dTSEC has detected a parity error on its stored transmit data, which
-+ * is likely to compromise the validity of recently transferred frames.
-+ *
-+ * %DTSEC_IEVENT_RDPE - Internal data error on receive.  This bit indicates that
-+ * the dTSEC has detected a parity error on its stored receive data, which is
-+ * likely to compromise the validity of recently transferred frames.
-+ */
-+/* Interrupt Mask Register (IMASK) */
-+#define DTSEC_IMASK_BREN	0x80000000
-+#define DTSEC_IMASK_RXCEN	0x40000000
-+#define DTSEC_IMASK_MSROEN	0x04000000
-+#define DTSEC_IMASK_GTSCEN	0x02000000
-+#define DTSEC_IMASK_BTEN	0x01000000
-+#define DTSEC_IMASK_TXCEN	0x00800000
-+#define DTSEC_IMASK_TXEEN	0x00400000
-+#define DTSEC_IMASK_LCEN	0x00040000
-+#define DTSEC_IMASK_CRLEN	0x00020000
-+#define DTSEC_IMASK_XFUNEN	0x00010000
-+#define DTSEC_IMASK_ABRTEN	0x00008000
-+#define DTSEC_IMASK_IFERREN	0x00004000
-+#define DTSEC_IMASK_MAGEN	0x00000800
-+#define DTSEC_IMASK_MMRDEN	0x00000400
-+#define DTSEC_IMASK_MMWREN	0x00000200
-+#define DTSEC_IMASK_GRSCEN	0x00000100
-+#define DTSEC_IMASK_TDPEEN	0x00000002
-+#define DTSEC_IMASK_RDPEEN	0x00000001
-+
-+#define DTSEC_EVENTS_MASK					\
-+	((uint32_t)(DTSEC_IMASK_BREN    | \
-+				DTSEC_IMASK_RXCEN   | \
-+				DTSEC_IMASK_BTEN    | \
-+				DTSEC_IMASK_TXCEN   | \
-+				DTSEC_IMASK_TXEEN   | \
-+				DTSEC_IMASK_ABRTEN  | \
-+				DTSEC_IMASK_LCEN    | \
-+				DTSEC_IMASK_CRLEN   | \
-+				DTSEC_IMASK_XFUNEN  | \
-+				DTSEC_IMASK_IFERREN | \
-+				DTSEC_IMASK_MAGEN   | \
-+				DTSEC_IMASK_TDPEEN  | \
-+				DTSEC_IMASK_RDPEEN))
-+
-+/* dtsec timestamp event bits */
-+#define TMR_PEMASK_TSREEN	0x00010000
-+#define TMR_PEVENT_TSRE		0x00010000
-+
-+/* Group address bit indication */
-+#define MAC_GROUP_ADDRESS	0x0000010000000000ULL
-+/* size in bytes of L2 address */
-+#define MAC_ADDRLEN		6
-+
-+#define DEFAULT_HALFDUP_ON		FALSE
-+#define DEFAULT_HALFDUP_RETRANSMIT	0xf
-+#define DEFAULT_HALFDUP_COLL_WINDOW	0x37
-+#define DEFAULT_HALFDUP_EXCESS_DEFER	TRUE
-+#define DEFAULT_HALFDUP_NO_BACKOFF	FALSE
-+#define DEFAULT_HALFDUP_BP_NO_BACKOFF	FALSE
-+#define DEFAULT_HALFDUP_ALT_BACKOFF_VAL	0x0A
-+#define DEFAULT_HALFDUP_ALT_BACKOFF_EN	FALSE
-+#define DEFAULT_RX_DROP_BCAST		FALSE
-+#define DEFAULT_RX_SHORT_FRM		TRUE
-+#define DEFAULT_RX_LEN_CHECK		FALSE
-+#define DEFAULT_TX_PAD_CRC		TRUE
-+#define DEFAULT_TX_CRC			FALSE
-+#define DEFAULT_RX_CTRL_ACC		FALSE
-+#define DEFAULT_TX_PAUSE_TIME		0xf000
-+#define DEFAULT_TBIPA			5
-+#define DEFAULT_RX_PREPEND		0
-+#define DEFAULT_PTP_TSU_EN		TRUE
-+#define DEFAULT_PTP_EXCEPTION_EN	TRUE
-+#define DEFAULT_PREAMBLE_LEN		7
-+#define DEFAULT_RX_PREAMBLE		FALSE
-+#define DEFAULT_TX_PREAMBLE		FALSE
-+#define DEFAULT_LOOPBACK		FALSE
-+#define DEFAULT_RX_TIME_STAMP_EN	FALSE
-+#define DEFAULT_TX_TIME_STAMP_EN	FALSE
-+#define DEFAULT_RX_FLOW			TRUE
-+#define DEFAULT_TX_FLOW			TRUE
-+#define DEFAULT_RX_GROUP_HASH_EXD	FALSE
-+#define DEFAULT_TX_PAUSE_TIME_EXTD	0
-+#define DEFAULT_RX_PROMISC		FALSE
-+#define DEFAULT_NON_BACK_TO_BACK_IPG1	0x40
-+#define DEFAULT_NON_BACK_TO_BACK_IPG2	0x60
-+#define DEFAULT_MIN_IFG_ENFORCEMENT	0x50
-+#define DEFAULT_BACK_TO_BACK_IPG	0x60
-+#define DEFAULT_MAXIMUM_FRAME		0x600
-+#define DEFAULT_TBI_PHY_ADDR		5
-+#define DEFAULT_WAKE_ON_LAN			FALSE
-+
-+/* register related defines (bits, field offsets..) */
-+#define DTSEC_ID1_ID			0xffff0000
-+#define DTSEC_ID1_REV_MJ		0x0000FF00
-+#define DTSEC_ID1_REV_MN		0x000000ff
-+
-+#define DTSEC_ID2_INT_REDUCED_OFF	0x00010000
-+#define DTSEC_ID2_INT_NORMAL_OFF	0x00020000
-+
-+#define DTSEC_ECNTRL_CLRCNT		0x00004000
-+#define DTSEC_ECNTRL_AUTOZ		0x00002000
-+#define DTSEC_ECNTRL_STEN		0x00001000
-+#define DTSEC_ECNTRL_CFG_RO		0x80000000
-+#define DTSEC_ECNTRL_GMIIM		0x00000040
-+#define DTSEC_ECNTRL_TBIM		0x00000020
-+#define DTSEC_ECNTRL_SGMIIM		0x00000002
-+#define DTSEC_ECNTRL_RPM		0x00000010
-+#define DTSEC_ECNTRL_R100M		0x00000008
-+#define DTSEC_ECNTRL_RMM		0x00000004
-+#define DTSEC_ECNTRL_QSGMIIM		0x00000001
-+
-+#define DTSEC_TCTRL_THDF		0x00000800
-+#define DTSEC_TCTRL_TTSE		0x00000040
-+#define DTSEC_TCTRL_GTS			0x00000020
-+#define DTSEC_TCTRL_TFC_PAUSE		0x00000010
-+
-+/* PTV offsets */
-+#define PTV_PTE_OFST		16
-+
-+#define RCTRL_CFA		0x00008000
-+#define RCTRL_GHTX		0x00000400
-+#define RCTRL_RTSE		0x00000040
-+#define RCTRL_GRS		0x00000020
-+#define RCTRL_BC_REJ		0x00000010
-+#define RCTRL_MPROM		0x00000008
-+#define RCTRL_RSF		0x00000004
-+#define RCTRL_UPROM		0x00000001
-+#define RCTRL_PROM		(RCTRL_UPROM | RCTRL_MPROM)
-+
-+#define TMR_CTL_ESFDP		0x00000800
-+#define TMR_CTL_ESFDE		0x00000400
-+
-+#define MACCFG1_SOFT_RESET	0x80000000
-+#define MACCFG1_LOOPBACK	0x00000100
-+#define MACCFG1_RX_FLOW		0x00000020
-+#define MACCFG1_TX_FLOW		0x00000010
-+#define MACCFG1_TX_EN		0x00000001
-+#define MACCFG1_RX_EN		0x00000004
-+#define MACCFG1_RESET_RxMC	0x00080000
-+#define MACCFG1_RESET_TxMC	0x00040000
-+#define MACCFG1_RESET_RxFUN	0x00020000
-+#define MACCFG1_RESET_TxFUN	0x00010000
-+
-+#define MACCFG2_NIBBLE_MODE	0x00000100
-+#define MACCFG2_BYTE_MODE	0x00000200
-+#define MACCFG2_PRE_AM_Rx_EN	0x00000080
-+#define MACCFG2_PRE_AM_Tx_EN	0x00000040
-+#define MACCFG2_LENGTH_CHECK	0x00000010
-+#define MACCFG2_MAGIC_PACKET_EN	0x00000008
-+#define MACCFG2_PAD_CRC_EN	0x00000004
-+#define MACCFG2_CRC_EN		0x00000002
-+#define MACCFG2_FULL_DUPLEX	0x00000001
-+
-+#define PREAMBLE_LENGTH_SHIFT	12
-+
-+#define IPGIFG_NON_BACK_TO_BACK_IPG_1_SHIFT	24
-+#define IPGIFG_NON_BACK_TO_BACK_IPG_2_SHIFT	16
-+#define IPGIFG_MIN_IFG_ENFORCEMENT_SHIFT	8
-+
-+#define IPGIFG_NON_BACK_TO_BACK_IPG_1	0x7F000000
-+#define IPGIFG_NON_BACK_TO_BACK_IPG_2	0x007F0000
-+#define IPGIFG_MIN_IFG_ENFORCEMENT	0x0000FF00
-+#define IPGIFG_BACK_TO_BACK_IPG		0x0000007F
-+
-+#define HAFDUP_ALT_BEB			0x00080000
-+#define HAFDUP_BP_NO_BACKOFF		0x00040000
-+#define HAFDUP_NO_BACKOFF		0x00020000
-+#define HAFDUP_EXCESS_DEFER		0x00010000
-+#define HAFDUP_COLLISION_WINDOW		0x000003ff
-+
-+#define HAFDUP_ALTERNATE_BEB_TRUNCATION_SHIFT	20
-+#define HAFDUP_RETRANSMISSION_MAX_SHIFT		12
-+#define HAFDUP_RETRANSMISSION_MAX		0x0000f000
-+
-+#define NUM_OF_HASH_REGS	8 /* Number of hash table registers */
-+
-+/* CAR1/2 bits */
-+#define DTSEC_CAR1_TR64		0x80000000
-+#define DTSEC_CAR1_TR127	0x40000000
-+#define DTSEC_CAR1_TR255	0x20000000
-+#define DTSEC_CAR1_TR511	0x10000000
-+#define DTSEC_CAR1_TRK1		0x08000000
-+#define DTSEC_CAR1_TRMAX	0x04000000
-+#define DTSEC_CAR1_TRMGV	0x02000000
-+
-+#define DTSEC_CAR1_RBYT		0x00010000
-+#define DTSEC_CAR1_RPKT		0x00008000
-+#define DTSEC_CAR1_RFCS		0x00004000
-+#define DTSEC_CAR1_RMCA		0x00002000
-+#define DTSEC_CAR1_RBCA		0x00001000
-+#define DTSEC_CAR1_RXCF		0x00000800
-+#define DTSEC_CAR1_RXPF		0x00000400
-+#define DTSEC_CAR1_RXUO		0x00000200
-+#define DTSEC_CAR1_RALN		0x00000100
-+#define DTSEC_CAR1_RFLR		0x00000080
-+#define DTSEC_CAR1_RCDE		0x00000040
-+#define DTSEC_CAR1_RCSE		0x00000020
-+#define DTSEC_CAR1_RUND		0x00000010
-+#define DTSEC_CAR1_ROVR		0x00000008
-+#define DTSEC_CAR1_RFRG		0x00000004
-+#define DTSEC_CAR1_RJBR		0x00000002
-+#define DTSEC_CAR1_RDRP		0x00000001
-+
-+#define DTSEC_CAR2_TJBR		0x00080000
-+#define DTSEC_CAR2_TFCS		0x00040000
-+#define DTSEC_CAR2_TXCF		0x00020000
-+#define DTSEC_CAR2_TOVR		0x00010000
-+#define DTSEC_CAR2_TUND		0x00008000
-+#define DTSEC_CAR2_TFRG		0x00004000
-+#define DTSEC_CAR2_TBYT		0x00002000
-+#define DTSEC_CAR2_TPKT		0x00001000
-+#define DTSEC_CAR2_TMCA		0x00000800
-+#define DTSEC_CAR2_TBCA		0x00000400
-+#define DTSEC_CAR2_TXPF		0x00000200
-+#define DTSEC_CAR2_TDFR		0x00000100
-+#define DTSEC_CAR2_TEDF		0x00000080
-+#define DTSEC_CAR2_TSCL		0x00000040
-+#define DTSEC_CAR2_TMCL		0x00000020
-+#define DTSEC_CAR2_TLCL		0x00000010
-+#define DTSEC_CAR2_TXCL		0x00000008
-+#define DTSEC_CAR2_TNCL		0x00000004
-+#define DTSEC_CAR2_TDRP		0x00000001
-+
-+#define CAM1_ERRORS_ONLY \
-+	(DTSEC_CAR1_RXPF | DTSEC_CAR1_RALN | DTSEC_CAR1_RFLR \
-+	| DTSEC_CAR1_RCDE | DTSEC_CAR1_RCSE | DTSEC_CAR1_RUND \
-+	| DTSEC_CAR1_ROVR | DTSEC_CAR1_RFRG | DTSEC_CAR1_RJBR \
-+	| DTSEC_CAR1_RDRP)
-+
-+#define CAM2_ERRORS_ONLY (DTSEC_CAR2_TFCS | DTSEC_CAR2_TXPF | DTSEC_CAR2_TDRP)
-+
-+/*
-+ * Group of dTSEC specific counters relating to the standard RMON MIB Group 1
-+ * (or Ethernet) statistics.
-+ */
-+#define CAM1_MIB_GRP_1 \
-+	(DTSEC_CAR1_RDRP | DTSEC_CAR1_RBYT | DTSEC_CAR1_RPKT | DTSEC_CAR1_RMCA\
-+	| DTSEC_CAR1_RBCA | DTSEC_CAR1_RALN | DTSEC_CAR1_RUND | DTSEC_CAR1_ROVR\
-+	| DTSEC_CAR1_RFRG | DTSEC_CAR1_RJBR \
-+	| DTSEC_CAR1_TR64 | DTSEC_CAR1_TR127 | DTSEC_CAR1_TR255 \
-+	| DTSEC_CAR1_TR511 | DTSEC_CAR1_TRMAX)
-+
-+#define CAM2_MIB_GRP_1 (DTSEC_CAR2_TNCL | DTSEC_CAR2_TDRP)
-+
-+/* memory map */
-+
-+struct dtsec_regs {
-+	/* dTSEC General Control and Status Registers */
-+	uint32_t tsec_id;	/* 0x000 ETSEC_ID register */
-+	uint32_t tsec_id2;	/* 0x004 ETSEC_ID2 register */
-+	uint32_t ievent;	/* 0x008 Interrupt event register */
-+	uint32_t imask;		/* 0x00C Interrupt mask register */
-+	uint32_t reserved0010[1];
-+	uint32_t ecntrl;	/* 0x014 E control register */
-+	uint32_t ptv;		/* 0x018 Pause time value register */
-+	uint32_t tbipa;		/* 0x01C TBI PHY address register */
-+	uint32_t tmr_ctrl;	/* 0x020 Time-stamp Control register */
-+	uint32_t tmr_pevent;	/* 0x024 Time-stamp event register */
-+	uint32_t tmr_pemask;	/* 0x028 Timer event mask register */
-+	uint32_t reserved002c[5];
-+	uint32_t tctrl;		/* 0x040 Transmit control register */
-+	uint32_t reserved0044[3];
-+	uint32_t rctrl;		/* 0x050 Receive control register */
-+	uint32_t reserved0054[11];
-+	uint32_t igaddr[8]; 	/* 0x080-0x09C Individual/group address */
-+	uint32_t gaddr[8];	/* 0x0A0-0x0BC Group address registers 0-7 */
-+	uint32_t reserved00c0[16];
-+	uint32_t maccfg1;		/* 0x100 MAC configuration #1 */
-+	uint32_t maccfg2;		/* 0x104 MAC configuration #2 */
-+	uint32_t ipgifg;		/* 0x108 IPG/IFG */
-+	uint32_t hafdup;		/* 0x10C Half-duplex */
-+	uint32_t maxfrm;		/* 0x110 Maximum frame */
-+	uint32_t reserved0114[10];
-+	uint32_t ifstat;		/* 0x13C Interface status */
-+	uint32_t macstnaddr1;		/* 0x140 Station Address,part 1 */
-+	uint32_t macstnaddr2;		/* 0x144 Station Address,part 2  */
-+	struct {
-+	    uint32_t exact_match1; /* octets 1-4 */
-+	    uint32_t exact_match2; /* octets 5-6 */
-+	} macaddr[15];	/* 0x148-0x1BC mac exact match addresses 1-15 */
-+	uint32_t reserved01c0[16];
-+	uint32_t tr64;	/* 0x200 transmit and receive 64 byte frame counter */
-+	uint32_t tr127;	/* 0x204 transmit and receive 65 to 127 byte frame
-+			 * counter */
-+	uint32_t tr255;	/* 0x208 transmit and receive 128 to 255 byte frame
-+			 * counter */
-+	uint32_t tr511;	/* 0x20C transmit and receive 256 to 511 byte frame
-+			 * counter */
-+	uint32_t tr1k;	/* 0x210 transmit and receive 512 to 1023 byte frame
-+			 * counter */
-+	uint32_t trmax;	/* 0x214 transmit and receive 1024 to 1518 byte frame
-+			 * counter */
-+	uint32_t trmgv;	/* 0x218 transmit and receive 1519 to 1522 byte good
-+			 * VLAN frame count */
-+	uint32_t rbyt;	/* 0x21C receive byte counter */
-+	uint32_t rpkt;	/* 0x220 receive packet counter */
-+	uint32_t rfcs;	/* 0x224 receive FCS error counter */
-+	uint32_t rmca;	/* 0x228 RMCA receive multicast packet counter */
-+	uint32_t rbca;	/* 0x22C receive broadcast packet counter */
-+	uint32_t rxcf;	/* 0x230 receive control frame packet counter */
-+	uint32_t rxpf;	/* 0x234 receive pause frame packet counter */
-+	uint32_t rxuo;	/* 0x238 receive unknown OP code counter */
-+	uint32_t raln;	/* 0x23C receive alignment error counter */
-+	uint32_t rflr;	/* 0x240 receive frame length error counter */
-+	uint32_t rcde;	/* 0x244 receive code error counter */
-+	uint32_t rcse;	/* 0x248 receive carrier sense error counter */
-+	uint32_t rund;	/* 0x24C receive undersize packet counter */
-+	uint32_t rovr;	/* 0x250 receive oversize packet counter */
-+	uint32_t rfrg;	/* 0x254 receive fragments counter */
-+	uint32_t rjbr;	/* 0x258 receive jabber counter */
-+	uint32_t rdrp;	/* 0x25C receive drop */
-+	uint32_t tbyt;	/* 0x260 transmit byte counter */
-+	uint32_t tpkt;	/* 0x264 transmit packet counter */
-+	uint32_t tmca;	/* 0x268 transmit multicast packet counter */
-+	uint32_t tbca;	/* 0x26C transmit broadcast packet counter */
-+	uint32_t txpf;	/* 0x270 transmit pause control frame counter */
-+	uint32_t tdfr;	/* 0x274 transmit deferral packet counter */
-+	uint32_t tedf;	/* 0x278 transmit excessive deferral packet counter */
-+	uint32_t tscl;	/* 0x27C transmit single collision packet counter */
-+	uint32_t tmcl;	/* 0x280 transmit multiple collision packet counter */
-+	uint32_t tlcl;	/* 0x284 transmit late collision packet counter */
-+	uint32_t txcl;	/* 0x288 transmit excessive collision packet counter */
-+	uint32_t tncl;	/* 0x28C transmit total collision counter */
-+	uint32_t reserved0290[1];
-+	uint32_t tdrp;	/* 0x294 transmit drop frame counter */
-+	uint32_t tjbr;	/* 0x298 transmit jabber frame counter */
-+	uint32_t tfcs;	/* 0x29C transmit FCS error counter */
-+	uint32_t txcf;	/* 0x2A0 transmit control frame counter */
-+	uint32_t tovr;	/* 0x2A4 transmit oversize frame counter */
-+	uint32_t tund;	/* 0x2A8 transmit undersize frame counter */
-+	uint32_t tfrg;	/* 0x2AC transmit fragments frame counter */
-+	uint32_t car1;	/* 0x2B0 carry register one register* */
-+	uint32_t car2;	/* 0x2B4 carry register two register* */
-+	uint32_t cam1;	/* 0x2B8 carry register one mask register */
-+	uint32_t cam2;	/* 0x2BC carry register two mask register */
-+	uint32_t reserved02c0[848];
-+};
-+
-+/**
-+ * struct dtsec_mib_grp_1_counters - MIB counter overflows
-+ *
-+ * @tr64:	Transmit and Receive 64 byte frame count.  Increment for each
-+ *		good or bad frame, of any type, transmitted or received, which
-+ *		is 64 bytes in length.
-+ * @tr127:	Transmit and Receive 65 to 127 byte frame count.  Increments for
-+ *		each good or bad frame of any type, transmitted or received,
-+ *		which is 65-127 bytes in length.
-+ * @tr255:	Transmit and Receive 128 to 255 byte frame count.  Increments
-+ *		for each good or bad frame, of any type, transmitted or
-+ *		received, which is 128-255 bytes in length.
-+ * @tr511:	Transmit and Receive 256 to 511 byte frame count.  Increments
-+ *		for each good or bad frame, of any type, transmitted or
-+ *		received, which is 256-511 bytes in length.
-+ * @tr1k:	Transmit and Receive 512 to 1023 byte frame count.  Increments
-+ *		for each good or bad frame, of any type, transmitted or
-+ *		received, which is 512-1023 bytes in length.
-+ * @trmax:	Transmit and Receive 1024 to 1518 byte frame count.  Increments
-+ *		for each good or bad frame, of any type, transmitted or
-+ *		received, which is 1024-1518 bytes in length.
-+ * @rfrg:	Receive fragments count.  Increments for each received frame
-+ *		which is less than 64 bytes in length and contains an invalid
-+ *		FCS.  This includes integral and non-integral lengths.
-+ * @rjbr:	Receive jabber count.  Increments for received frames which
-+ *		exceed 1518 (non VLAN) or 1522 (VLAN) bytes and contain an
-+ *		invalid FCS.  This includes alignment errors.
-+ * @rdrp:	Receive dropped packets count.  Increments for received frames
-+ *		which are streamed to system but are later dropped due to lack
-+ *		of system resources.  Does not increment for frames rejected due
-+ *		to address filtering.
-+ * @raln:	Receive alignment error count.  Increments for each received
-+ *		frame from 64 to 1518 (non VLAN) or 1522 (VLAN) which contains
-+ *		an invalid FCS and is not an integral number of bytes.
-+ * @rund:	Receive undersize packet count.  Increments each time a frame is
-+ *		received which is less than 64 bytes in length and contains a
-+ *		valid FCS and is otherwise well formed.  This count does not
-+ *		include range length errors.
-+ * @rovr:	Receive oversize packet count.  Increments each time a frame is
-+ *		received which exceeded 1518 (non VLAN) or 1522 (VLAN) and
-+ *		contains a valid FCS and is otherwise well formed.
-+ * @rbyt:	Receive byte count.  Increments by the byte count of frames
-+ *		received, including those in bad packets, excluding preamble and
-+ *		SFD but including FCS bytes.
-+ * @rpkt:	Receive packet count.  Increments for each received frame
-+ *		(including bad packets, all unicast, broadcast, and multicast
-+ *		packets).
-+ * @rmca:	Receive multicast packet count.  Increments for each multicast
-+ *		frame with valid CRC and of lengths 64 to 1518 (non VLAN) or
-+ *		1522 (VLAN), excluding broadcast frames. This count does not
-+ *		include range/length errors.
-+ * @rbca:	Receive broadcast packet count.  Increments for each broadcast
-+ *		frame with valid CRC and of lengths 64 to 1518 (non VLAN) or
-+ *		1522 (VLAN), excluding multicast frames. Does not include
-+ *		range/length errors.
-+ * @tdrp:	Transmit drop frame count.  Increments each time a memory error
-+ *		or an underrun has occurred.
-+ * @tncl:	Transmit total collision counter. Increments by the number of
-+ *		collisions experienced during the transmission of a frame. Does
-+ *		not increment for aborted frames.
-+ *
-+ * The structure contains a group of dTSEC HW specific counters relating to the
-+ * standard RMON MIB Group 1 (or Ethernet statistics) counters.  This structure
-+ * is counting only the carry events of the corresponding HW counters.
-+ *
-+ * tr64 to trmax notes: Frame sizes specified are considered excluding preamble
-+ * and SFD but including FCS bytes.
-+ */
-+struct dtsec_mib_grp_1_counters {
-+	uint64_t	rdrp;
-+	uint64_t	tdrp;
-+	uint64_t	rbyt;
-+	uint64_t	rpkt;
-+	uint64_t	rbca;
-+	uint64_t	rmca;
-+	uint64_t	raln;
-+	uint64_t	rund;
-+	uint64_t	rovr;
-+	uint64_t	rfrg;
-+	uint64_t	rjbr;
-+	uint64_t	tncl;
-+	uint64_t	tr64;
-+	uint64_t	tr127;
-+	uint64_t	tr255;
-+	uint64_t	tr511;
-+	uint64_t	tr1k;
-+	uint64_t	trmax;
-+};
-+
-+enum dtsec_stat_counters {
-+	E_DTSEC_STAT_TR64,
-+	E_DTSEC_STAT_TR127,
-+	E_DTSEC_STAT_TR255,
-+	E_DTSEC_STAT_TR511,
-+	E_DTSEC_STAT_TR1K,
-+	E_DTSEC_STAT_TRMAX,
-+	E_DTSEC_STAT_TRMGV,
-+	E_DTSEC_STAT_RBYT,
-+	E_DTSEC_STAT_RPKT,
-+	E_DTSEC_STAT_RMCA,
-+	E_DTSEC_STAT_RBCA,
-+	E_DTSEC_STAT_RXPF,
-+	E_DTSEC_STAT_RALN,
-+	E_DTSEC_STAT_RFLR,
-+	E_DTSEC_STAT_RCDE,
-+	E_DTSEC_STAT_RCSE,
-+	E_DTSEC_STAT_RUND,
-+	E_DTSEC_STAT_ROVR,
-+	E_DTSEC_STAT_RFRG,
-+	E_DTSEC_STAT_RJBR,
-+	E_DTSEC_STAT_RDRP,
-+	E_DTSEC_STAT_TFCS,
-+	E_DTSEC_STAT_TBYT,
-+	E_DTSEC_STAT_TPKT,
-+	E_DTSEC_STAT_TMCA,
-+	E_DTSEC_STAT_TBCA,
-+	E_DTSEC_STAT_TXPF,
-+	E_DTSEC_STAT_TNCL,
-+	E_DTSEC_STAT_TDRP
-+};
-+
-+enum dtsec_stat_level {
-+	/* No statistics */
-+	E_MAC_STAT_NONE = 0,
-+	/* Only RMON MIB group 1 (ether stats). Optimized for performance */
-+	E_MAC_STAT_MIB_GRP1,
-+	/* Only error counters are available. Optimized for performance */
-+	E_MAC_STAT_PARTIAL,
-+	/* All counters available. Not optimized for performance */
-+	E_MAC_STAT_FULL
-+};
-+
-+
-+/**
-+ * struct dtsec_cfg - dTSEC configuration
-+ *
-+ * @halfdup_on:		Transmit half-duplex flow control, under software
-+ *			control for 10/100-Mbps half-duplex media. If set,
-+ *			back pressure is applied to media by raising carrier.
-+ * @halfdup_retransmit:	Number of retransmission attempts following a collision.
-+ *			If this is exceeded dTSEC aborts transmission due to
-+ *			excessive collisions. The standard specifies the
-+ *			attempt limit to be 15.
-+ * @halfdup_coll_window:The number of bytes of the frame during which
-+ *			collisions may occur. The default value of 55
-+ *			corresponds to the frame byte at the end of the
-+ *			standard 512-bit slot time window. If collisions are
-+ *			detected after this byte, the late collision event is
-+ *			asserted and transmission of current frame is aborted.
-+ * @rx_drop_bcast:	Discard broadcast frames.  If set, all broadcast frames
-+ *			will be discarded by dTSEC.
-+ * @rx_short_frm:	Accept short frames.  If set, dTSEC will accept frames
-+ *			of length 14..63 bytes.
-+ * @rx_len_check:	Length check for received frames.  If set, the MAC
-+ *			checks the frame's length field on receive to ensure it
-+ *			matches the actual data field length. This only works
-+ *			for received frames with length field less than 1500.
-+ *			No check is performed for larger frames.
-+ * @tx_pad_crc:		Pad and append CRC.  If set, the MAC pads all
-+ *			transmitted short frames and appends a CRC to every
-+ *			frame regardless of padding requirement.
-+ * @tx_crc:		Transmission CRC enable.  If set, the MAC appends a CRC
-+ *			to all frames.  If frames presented to the MAC have a
-+ *			valid length and contain a valid CRC, @tx_crc should be
-+ *			reset.
-+ *			This field is ignored if @tx_pad_crc is set.
-+ * @rx_ctrl_acc:	Control frame accept.  If set, this overrides 802.3
-+ *			standard control frame behavior, and all Ethernet frames
-+ *			that have an ethertype of 0x8808 are treated as normal
-+ *			Ethernet frames and passed up to the packet interface on
-+ *			a DA match.  Received pause control frames are passed to
-+ *			the packet interface only if Rx flow control is also
-+ *			disabled.  See fman_dtsec_handle_rx_pause() function.
-+ * @tx_pause_time:	Transmit pause time value.  This pause value is used as
-+ *			part of the pause frame to be sent when a transmit pause
-+ *			frame is initiated.  If set to 0 this disables
-+ *			transmission of pause frames.
-+ * @rx_preamble:	Receive preamble enable.  If set, the MAC recovers the
-+ *			received Ethernet 7-byte preamble and passes it to the
-+ *			packet interface at the start of each received frame.
-+ *			This field should be reset for internal MAC loop-back
-+ *			mode.
-+ * @tx_preamble:	User defined preamble enable for transmitted frames.
-+ *			If set, a user-defined preamble must passed to the MAC
-+ *			and it is transmitted instead of the standard preamble.
-+ * @preamble_len:	Length, in bytes, of the preamble field preceding each
-+ *			Ethernet start-of-frame delimiter byte.  The default
-+ *			value of 0x7 should be used in order to guarantee
-+ *			reliable operation with IEEE 802.3 compliant hardware.
-+ * @rx_prepend:		Packet alignment padding length.  The specified number
-+ *			of bytes (1-31) of zero padding are inserted before the
-+ *			start of each received frame.  For Ethernet, where
-+ *			optional preamble extraction is enabled, the padding
-+ *			appears before the preamble, otherwise the padding
-+ *			precedes the layer 2 header.
-+ *
-+ * This structure contains basic dTSEC configuration and must be passed to
-+ * fman_dtsec_init() function.  A default set of configuration values can be
-+ * obtained by calling fman_dtsec_defconfig().
-+ */
-+struct dtsec_cfg {
-+	bool		halfdup_on;
-+	bool		halfdup_alt_backoff_en;
-+	bool		halfdup_excess_defer;
-+	bool		halfdup_no_backoff;
-+	bool		halfdup_bp_no_backoff;
-+	uint8_t		halfdup_alt_backoff_val;
-+	uint16_t	halfdup_retransmit;
-+	uint16_t	halfdup_coll_window;
-+	bool		rx_drop_bcast;
-+	bool		rx_short_frm;
-+	bool		rx_len_check;
-+	bool		tx_pad_crc;
-+	bool		tx_crc;
-+	bool		rx_ctrl_acc;
-+	unsigned short	tx_pause_time;
-+	unsigned short	tbipa;
-+	bool		ptp_tsu_en;
-+	bool		ptp_exception_en;
-+	bool		rx_preamble;
-+	bool		tx_preamble;
-+	unsigned char	preamble_len;
-+	unsigned char	rx_prepend;
-+	bool		loopback;
-+	bool		rx_time_stamp_en;
-+	bool		tx_time_stamp_en;
-+	bool		rx_flow;
-+	bool		tx_flow;
-+	bool		rx_group_hash_exd;
-+	bool		rx_promisc;
-+	uint8_t		tbi_phy_addr;
-+	uint16_t	tx_pause_time_extd;
-+	uint16_t	maximum_frame;
-+	uint32_t	non_back_to_back_ipg1;
-+	uint32_t	non_back_to_back_ipg2;
-+	uint32_t	min_ifg_enforcement;
-+	uint32_t	back_to_back_ipg;
-+	bool		wake_on_lan;
-+};
-+
-+
-+/**
-+ * fman_dtsec_defconfig() - Get default dTSEC configuration
-+ * @cfg:	pointer to configuration structure.
-+ *
-+ * Call this function to obtain a default set of configuration values for
-+ * initializing dTSEC.  The user can overwrite any of the values before calling
-+ * fman_dtsec_init(), if specific configuration needs to be applied.
-+ */
-+void fman_dtsec_defconfig(struct dtsec_cfg *cfg);
-+
-+/**
-+ * fman_dtsec_init() - Init dTSEC hardware block
-+ * @regs:		Pointer to dTSEC register block
-+ * @cfg:		dTSEC configuration data
-+ * @iface_mode:		dTSEC interface mode, the type of MAC - PHY interface.
-+ * @iface_speed:	1G or 10G
-+ * @macaddr:		MAC station address to be assigned to the device
-+ * @fm_rev_maj:		major rev number
-+ * @fm_rev_min:		minor rev number
-+ * @exceptions_mask:	initial exceptions mask
-+ *
-+ * This function initializes dTSEC and applies basic configuration.
-+ *
-+ * dTSEC initialization sequence:
-+ * Before enabling Rx/Tx call dtsec_set_address() to set MAC address,
-+ * fman_dtsec_adjust_link() to configure interface speed and duplex and finally
-+ * dtsec_enable_tx()/dtsec_enable_rx() to start transmission and reception.
-+ *
-+ * Returns: 0 if successful, an error code otherwise.
-+ */
-+int fman_dtsec_init(struct dtsec_regs *regs, struct dtsec_cfg *cfg,
-+	enum enet_interface iface_mode,
-+	enum enet_speed iface_speed,
-+	uint8_t *macaddr, uint8_t fm_rev_maj,
-+	uint8_t fm_rev_min,
-+	uint32_t exception_mask);
-+
-+/**
-+ * fman_dtsec_enable() - Enable dTSEC Tx and Tx
-+ * @regs:	Pointer to dTSEC register block
-+ * @apply_rx:	enable rx side
-+ * @apply_tx:	enable tx side
-+ *
-+ * This function resets Tx and Rx graceful stop bit and enables dTSEC Tx and Rx.
-+ */
-+void fman_dtsec_enable(struct dtsec_regs *regs, bool apply_rx, bool apply_tx);
-+
-+/**
-+ * fman_dtsec_disable() - Disable dTSEC Tx and Rx
-+ * @regs:	Pointer to dTSEC register block
-+ * @apply_rx:	disable rx side
-+ * @apply_tx:	disable tx side
-+ *
-+ * This function disables Tx and Rx in dTSEC.
-+ */
-+void fman_dtsec_disable(struct dtsec_regs *regs, bool apply_rx, bool apply_tx);
-+
-+/**
-+ * fman_dtsec_get_revision() - Get dTSEC hardware revision
-+ * @regs:   Pointer to dTSEC register block
-+ *
-+ * Returns dtsec_id content
-+ *
-+ * Call this function to obtain the dTSEC hardware version.
-+ */
-+uint32_t fman_dtsec_get_revision(struct dtsec_regs *regs);
-+
-+/**
-+ * fman_dtsec_set_mac_address() - Set MAC station address
-+ * @regs:   Pointer to dTSEC register block
-+ * @macaddr:    MAC address array
-+ *
-+ * This function sets MAC station address.  To enable unicast reception call
-+ * this after fman_dtsec_init().  While promiscuous mode is disabled dTSEC will
-+ * match the destination address of received unicast frames against this
-+ * address.
-+ */
-+void fman_dtsec_set_mac_address(struct dtsec_regs *regs, uint8_t *macaddr);
-+
-+/**
-+ * fman_dtsec_get_mac_address() - Query MAC station address
-+ * @regs:   Pointer to dTSEC register block
-+ * @macaddr:    MAC address array
-+ */
-+void fman_dtsec_get_mac_address(struct dtsec_regs *regs, uint8_t *macaddr);
-+
-+/**
-+ * fman_dtsec_set_uc_promisc() - Sets unicast promiscuous mode
-+ * @regs:	Pointer to dTSEC register block
-+ * @enable:	Enable unicast promiscuous mode
-+ *
-+ * Use this function to enable/disable dTSEC L2 address filtering.  If the
-+ * address filtering is disabled all unicast packets are accepted.
-+ * To set dTSEC in promiscuous mode call both fman_dtsec_set_uc_promisc() and
-+ * fman_dtsec_set_mc_promisc() to disable filtering for both unicast and
-+ * multicast addresses.
-+ */
-+void fman_dtsec_set_uc_promisc(struct dtsec_regs *regs, bool enable);
-+
-+/**
-+ * fman_dtsec_set_wol() - Enable/Disable wake on lan
-+ *                        (magic packet support)
-+ * @regs:   Pointer to dTSEC register block
-+ * @en:     Enable Wake On Lan support in dTSEC
-+ *
-+ */
-+void fman_dtsec_set_wol(struct dtsec_regs *regs, bool en);
-+
-+/**
-+ * fman_dtsec_adjust_link() - Adjust dTSEC speed/duplex settings
-+ * @regs:	Pointer to dTSEC register block
-+ * @iface_mode: dTSEC interface mode
-+ * @speed:	Link speed
-+ * @full_dx:	True for full-duplex, false for half-duplex.
-+ *
-+ * This function configures the MAC to function and the desired rates.  Use it
-+ * to configure dTSEC after fman_dtsec_init() and whenever the link speed
-+ * changes (for instance following PHY auto-negociation).
-+ *
-+ * Returns: 0 if successful, an error code otherwise.
-+ */
-+int fman_dtsec_adjust_link(struct dtsec_regs *regs,
-+	enum enet_interface iface_mode,
-+	enum enet_speed speed, bool full_dx);
-+
-+/**
-+ * fman_dtsec_set_tbi_phy_addr() - Updates TBI address field
-+ * @regs:	Pointer to dTSEC register block
-+ * @address:	Valid PHY address in the range of 1 to 31. 0 is reserved.
-+ *
-+ * In SGMII mode, the dTSEC's TBIPA field must contain a valid TBI PHY address
-+ * so that the associated TBI PHY (i.e. the link) may be initialized.
-+ *
-+ * Returns: 0 if successful, an error code otherwise.
-+ */
-+int fman_dtsec_set_tbi_phy_addr(struct dtsec_regs *regs,
-+	uint8_t addr);
-+
-+/**
-+ * fman_dtsec_set_max_frame_len() - Set max frame length
-+ * @regs:	Pointer to dTSEC register block
-+ * @length:	Max frame length.
-+ *
-+ * Sets maximum frame length for received and transmitted frames.  Frames that
-+ * exceeds this length are truncated.
-+ */
-+void fman_dtsec_set_max_frame_len(struct dtsec_regs *regs, uint16_t length);
-+
-+/**
-+ * fman_dtsec_get_max_frame_len() - Query max frame length
-+ * @regs:	Pointer to dTSEC register block
-+ *
-+ * Returns: the current value of the maximum frame length.
-+ */
-+uint16_t fman_dtsec_get_max_frame_len(struct dtsec_regs *regs);
-+
-+/**
-+ * fman_dtsec_handle_rx_pause() - Configure pause frame handling
-+ * @regs:	Pointer to dTSEC register block
-+ * @en:		Enable pause frame handling in dTSEC
-+ *
-+ * If enabled, dTSEC will handle pause frames internally.  This must be disabled
-+ * if dTSEC is set in half-duplex mode.
-+ * If pause frame handling is disabled and &dtsec_cfg.rx_ctrl_acc is set, pause
-+ * frames will be transferred to the packet interface just like regular Ethernet
-+ * frames.
-+ */
-+void fman_dtsec_handle_rx_pause(struct dtsec_regs *regs, bool en);
-+
-+/**
-+ * fman_dtsec_set_tx_pause_frames() - Configure Tx pause time
-+ * @regs:	Pointer to dTSEC register block
-+ * @time:	Time value included in pause frames
-+ *
-+ * Call this function to set the time value used in transmitted pause frames.
-+ * If time is 0, transmission of pause frames is disabled
-+ */
-+void fman_dtsec_set_tx_pause_frames(struct dtsec_regs *regs, uint16_t time);
-+
-+/**
-+ * fman_dtsec_ack_event() - Acknowledge handled events
-+ * @regs:	Pointer to dTSEC register block
-+ * @ev_mask:	Events to acknowledge
-+ *
-+ * After handling events signaled by dTSEC in either polling or interrupt mode,
-+ * call this function to reset the associated status bits in dTSEC event
-+ * register.
-+ */
-+void fman_dtsec_ack_event(struct dtsec_regs *regs, uint32_t ev_mask);
-+
-+/**
-+ * fman_dtsec_get_event() - Returns currently asserted events
-+ * @regs:	Pointer to dTSEC register block
-+ * @ev_mask:	Mask of relevant events
-+ *
-+ * Call this function to obtain a bit-mask of events that are currently asserted
-+ * in dTSEC, taken from IEVENT register.
-+ *
-+ * Returns: a bit-mask of events asserted in dTSEC.
-+ */
-+uint32_t fman_dtsec_get_event(struct dtsec_regs *regs, uint32_t ev_mask);
-+
-+/**
-+ * fman_dtsec_get_interrupt_mask() - Returns a bit-mask of enabled interrupts
-+ * @regs:   Pointer to dTSEC register block
-+ *
-+ * Call this function to obtain a bit-mask of enabled interrupts
-+ * in dTSEC, taken from IMASK register.
-+ *
-+ * Returns: a bit-mask of enabled interrupts in dTSEC.
-+ */
-+uint32_t fman_dtsec_get_interrupt_mask(struct dtsec_regs *regs);
-+
-+void fman_dtsec_clear_addr_in_paddr(struct dtsec_regs *regs,
-+	uint8_t paddr_num);
-+
-+void fman_dtsec_add_addr_in_paddr(struct dtsec_regs *regs,
-+	uint64_t addr,
-+	uint8_t paddr_num);
-+
-+void fman_dtsec_enable_tmr_interrupt (struct dtsec_regs *regs);
-+
-+void fman_dtsec_disable_tmr_interrupt(struct dtsec_regs *regs);
-+
-+/**
-+ * fman_dtsec_disable_interrupt() - Disables interrupts for the specified events
-+ * @regs:	Pointer to dTSEC register block
-+ * @ev_mask:	Mask of relevant events
-+ *
-+ * Call this function to disable interrupts in dTSEC for the specified events.
-+ * To enable interrupts use fman_dtsec_enable_interrupt().
-+ */
-+void fman_dtsec_disable_interrupt(struct dtsec_regs *regs, uint32_t ev_mask);
-+
-+/**
-+ * fman_dtsec_enable_interrupt() - Enable interrupts for the specified events
-+ * @regs:	Pointer to dTSEC register block
-+ * @ev_mask:	Mask of relevant events
-+ *
-+ * Call this function to enable interrupts in dTSEC for the specified events.
-+ * To disable interrupts use fman_dtsec_disable_interrupt().
-+ */
-+void fman_dtsec_enable_interrupt(struct dtsec_regs *regs, uint32_t ev_mask);
-+
-+/**
-+ * fman_dtsec_set_ts() - Enables dTSEC timestamps
-+ * @regs:	Pointer to dTSEC register block
-+ * @en:		true to enable timestamps, false to disable them
-+ *
-+ * Call this function to enable/disable dTSEC timestamps.  This affects both
-+ * Tx and Rx.
-+ */
-+void fman_dtsec_set_ts(struct dtsec_regs *regs, bool en);
-+
-+/**
-+ * fman_dtsec_set_bucket() - Enables/disables a filter bucket
-+ * @regs:   Pointer to dTSEC register block
-+ * @bucket: Bucket index
-+ * @enable: true/false to enable/disable this bucket
-+ *
-+ * This function enables or disables the specified bucket.  Enabling a bucket
-+ * associated with an address configures dTSEC to accept received packets
-+ * with that destination address.
-+ * Multiple addresses may be associated with the same bucket.  Disabling a
-+ * bucket will affect all addresses associated with that bucket. A bucket that
-+ * is enabled requires further filtering and verification in the upper layers
-+ *
-+ */
-+void fman_dtsec_set_bucket(struct dtsec_regs *regs, int bucket, bool enable);
-+
-+/**
-+ * dtsec_set_hash_table() - insert a crc code into thr filter table
-+ * @regs:	Pointer to dTSEC register block
-+ * @crc:	crc to insert
-+ * @mcast:	true is this is a multicast address
-+ * @ghtx:	true if we are in ghtx mode
-+ *
-+ * This function inserts a crc code into the filter table.
-+ */
-+void fman_dtsec_set_hash_table(struct dtsec_regs *regs, uint32_t crc,
-+	bool mcast, bool ghtx);
-+
-+/**
-+ * fman_dtsec_reset_filter_table() - Resets the address filtering table
-+ * @regs:	Pointer to dTSEC register block
-+ * @mcast:	Reset multicast entries
-+ * @ucast:	Reset unicast entries
-+ *
-+ * Resets all entries in L2 address filter table.  After calling this function
-+ * all buckets enabled using fman_dtsec_set_bucket() will be disabled.
-+ * If dtsec_init_filter_table() was called with @unicast_hash set to false,
-+ * @ucast argument is ignored.
-+ * This does not affect the primary nor the 15 additional addresses configured
-+ * using dtsec_set_address() or dtsec_set_match_address().
-+ */
-+void fman_dtsec_reset_filter_table(struct dtsec_regs *regs, bool mcast,
-+	bool ucast);
-+
-+/**
-+ * fman_dtsec_set_mc_promisc() - Set multicast promiscuous mode
-+ * @regs:	Pointer to dTSEC register block
-+ * @enable:	Enable multicast promiscuous mode
-+ *
-+ * Call this to enable/disable L2 address filtering for multicast packets.
-+ */
-+void fman_dtsec_set_mc_promisc(struct dtsec_regs *regs, bool enable);
-+
-+/* statistics APIs */
-+
-+/**
-+ * fman_dtsec_set_stat_level() - Enable a group of MIB statistics counters
-+ * @regs:	Pointer to dTSEC register block
-+ * @level:	Specifies a certain group of dTSEC MIB HW counters or _all_,
-+ *		to specify all the existing counters.
-+ *		If set to _none_, it disables all the counters.
-+ *
-+ * Enables the MIB statistics hw counters and sets up the carry interrupt
-+ * masks for the counters corresponding to the @level input parameter.
-+ *
-+ * Returns: error if invalid @level value given.
-+ */
-+int fman_dtsec_set_stat_level(struct dtsec_regs *regs,
-+	enum dtsec_stat_level level);
-+
-+/**
-+ * fman_dtsec_reset_stat() - Completely resets all dTSEC HW counters
-+ * @regs:	Pointer to dTSEC register block
-+ */
-+void fman_dtsec_reset_stat(struct dtsec_regs *regs);
-+
-+/**
-+ * fman_dtsec_get_clear_carry_regs() - Read and clear carry bits (CAR1-2 registers)
-+ * @regs:	Pointer to dTSEC register block
-+ * @car1:	car1 register value
-+ * @car2:	car2 register value
-+ *
-+ * When set, the carry bits signal that an overflow occurred on the
-+ * corresponding counters.
-+ * Note that the carry bits (CAR1-2 registers) will assert the
-+ * %DTSEC_IEVENT_MSRO interrupt if unmasked (via CAM1-2 regs).
-+ *
-+ * Returns: true if overflow occurred, otherwise - false
-+ */
-+bool fman_dtsec_get_clear_carry_regs(struct dtsec_regs *regs,
-+	uint32_t *car1, uint32_t *car2);
-+
-+uint32_t fman_dtsec_check_and_clear_tmr_event(struct dtsec_regs *regs);
-+
-+uint32_t fman_dtsec_get_stat_counter(struct dtsec_regs *regs,
-+	enum dtsec_stat_counters reg_name);
-+
-+void fman_dtsec_start_tx(struct dtsec_regs *regs);
-+void fman_dtsec_start_rx(struct dtsec_regs *regs);
-+void fman_dtsec_stop_tx(struct dtsec_regs *regs);
-+void fman_dtsec_stop_rx(struct dtsec_regs *regs);
-+uint32_t fman_dtsec_get_rctrl(struct dtsec_regs *regs);
-+
-+
-+#endif /* __FSL_FMAN_DTSEC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_dtsec_mii_acc.h
-@@ -0,0 +1,107 @@
-+/*
-+ * Copyright 2008-2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __FSL_FMAN_DTSEC_MII_ACC_H
-+#define __FSL_FMAN_DTSEC_MII_ACC_H
-+
-+#include "common/general.h"
-+
-+
-+/* MII Management Configuration Register */
-+#define MIIMCFG_RESET_MGMT		0x80000000
-+#define MIIMCFG_MGNTCLK_MASK		0x00000007
-+#define MIIMCFG_MGNTCLK_SHIFT		0
-+
-+/* MII  Management Command Register */
-+#define MIIMCOM_SCAN_CYCLE		0x00000002
-+#define MIIMCOM_READ_CYCLE		0x00000001
-+
-+/* MII  Management Address Register */
-+#define MIIMADD_PHY_ADDR_SHIFT		8
-+#define MIIMADD_PHY_ADDR_MASK		0x00001f00
-+
-+#define MIIMADD_REG_ADDR_SHIFT		0
-+#define MIIMADD_REG_ADDR_MASK		0x0000001f
-+
-+/* MII Management Indicator Register */
-+#define MIIMIND_BUSY			0x00000001
-+
-+
-+/* PHY Control Register */
-+#define PHY_CR_PHY_RESET    0x8000
-+#define PHY_CR_LOOPBACK     0x4000
-+#define PHY_CR_SPEED0       0x2000
-+#define PHY_CR_ANE          0x1000
-+#define PHY_CR_RESET_AN     0x0200
-+#define PHY_CR_FULLDUPLEX   0x0100
-+#define PHY_CR_SPEED1       0x0040
-+
-+#define PHY_TBICON_SRESET   0x8000
-+#define PHY_TBICON_SPEED2   0x0020
-+#define PHY_TBICON_CLK_SEL  0x0020
-+#define PHY_TBIANA_SGMII    0x4001
-+#define PHY_TBIANA_1000X    0x01a0
-+/* register map */
-+
-+/* MII Configuration Control Memory Map Registers */
-+struct dtsec_mii_reg {
-+	uint32_t reserved1[72];
-+	uint32_t miimcfg;	/* MII Mgmt:configuration */
-+	uint32_t miimcom;	/* MII Mgmt:command       */
-+	uint32_t miimadd;	/* MII Mgmt:address       */
-+	uint32_t miimcon;	/* MII Mgmt:control 3     */
-+	uint32_t miimstat;	/* MII Mgmt:status        */
-+	uint32_t miimind;	/* MII Mgmt:indicators    */
-+};
-+
-+/* dTSEC MII API */
-+
-+/* functions to access the mii registers for phy configuration.
-+ * this functionality may not be available for all dtsecs in the system.
-+ * consult the reference manual for details */
-+void fman_dtsec_mii_reset(struct dtsec_mii_reg *regs);
-+/* frequency is in MHz.
-+ * note that dtsec clock is 1/2 of fman clock */
-+void fman_dtsec_mii_init(struct dtsec_mii_reg *regs, uint16_t dtsec_freq);
-+int fman_dtsec_mii_write_reg(struct dtsec_mii_reg *regs,
-+			uint8_t addr,
-+			uint8_t reg,
-+			uint16_t data,
-+			uint16_t dtsec_freq);
-+
-+int fman_dtsec_mii_read_reg(struct dtsec_mii_reg *regs,
-+			uint8_t addr,
-+			uint8_t reg,
-+			uint16_t *data,
-+			uint16_t dtsec_freq);
-+
-+#endif /* __FSL_FMAN_DTSEC_MII_ACC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_kg.h
-@@ -0,0 +1,514 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __FSL_FMAN_KG_H
-+#define __FSL_FMAN_KG_H
-+
-+#include "common/general.h"
-+
-+#define FM_KG_NUM_OF_GENERIC_REGS	8 /**< Num of generic KeyGen regs */
-+#define FMAN_MAX_NUM_OF_HW_PORTS	64
-+/**< Total num of masks allowed on KG extractions */
-+#define FM_KG_EXTRACT_MASKS_NUM		4
-+#define FM_KG_NUM_CLS_PLAN_ENTR		8 /**< Num of class. plan regs */
-+#define FM_KG_CLS_PLAN_GRPS_NUM		32 /**< Max num of class. groups */
-+
-+struct fman_kg_regs {
-+	uint32_t fmkg_gcr;
-+	uint32_t res004;
-+	uint32_t res008;
-+	uint32_t fmkg_eer;
-+	uint32_t fmkg_eeer;
-+	uint32_t res014;
-+	uint32_t res018;
-+	uint32_t fmkg_seer;
-+	uint32_t fmkg_seeer;
-+	uint32_t fmkg_gsr;
-+	uint32_t fmkg_tpc;
-+	uint32_t fmkg_serc;
-+	uint32_t res030[4];
-+	uint32_t fmkg_fdor;
-+	uint32_t fmkg_gdv0r;
-+	uint32_t fmkg_gdv1r;
-+	uint32_t res04c[6];
-+	uint32_t fmkg_feer;
-+	uint32_t res068[38];
-+	uint32_t fmkg_indirect[63];
-+	uint32_t fmkg_ar;
-+};
-+
-+struct fman_kg_scheme_regs {
-+	uint32_t kgse_mode; /**< MODE */
-+	uint32_t kgse_ekfc; /**< Extract Known Fields Command */
-+	uint32_t kgse_ekdv; /**< Extract Known Default Value */
-+	uint32_t kgse_bmch; /**< Bit Mask Command High */
-+	uint32_t kgse_bmcl; /**< Bit Mask Command Low */
-+	uint32_t kgse_fqb; /**< Frame Queue Base */
-+	uint32_t kgse_hc; /**< Hash Command */
-+	uint32_t kgse_ppc; /**< Policer Profile Command */
-+	uint32_t kgse_gec[FM_KG_NUM_OF_GENERIC_REGS];
-+				/**< Generic Extract Command */
-+	uint32_t kgse_spc; /**< KeyGen Scheme Entry Statistic Packet Counter */
-+	uint32_t kgse_dv0; /**< KeyGen Scheme Entry Default Value 0 */
-+	uint32_t kgse_dv1; /**< KeyGen Scheme Entry Default Value 1 */
-+	uint32_t kgse_ccbs; /**< KeyGen Scheme Entry Coarse Classification Bit*/
-+	uint32_t kgse_mv; /**< KeyGen Scheme Entry Match vector */
-+	uint32_t kgse_om; /**< KeyGen Scheme Entry Operation Mode bits */
-+	uint32_t kgse_vsp; /**< KeyGen Scheme Entry Virtual Storage Profile */
-+};
-+
-+struct fman_kg_pe_regs{
-+	uint32_t fmkg_pe_sp;
-+	uint32_t fmkg_pe_cpp;
-+};
-+
-+struct fman_kg_cp_regs {
-+	uint32_t kgcpe[FM_KG_NUM_CLS_PLAN_ENTR];
-+};
-+
-+
-+#define FM_KG_KGAR_GO				0x80000000
-+#define FM_KG_KGAR_READ				0x40000000
-+#define FM_KG_KGAR_WRITE			0x00000000
-+#define FM_KG_KGAR_SEL_SCHEME_ENTRY		0x00000000
-+#define FM_KG_KGAR_SCM_WSEL_UPDATE_CNT		0x00008000
-+
-+#define KG_SCH_PP_SHIFT_HIGH			0x80000000
-+#define KG_SCH_PP_NO_GEN			0x10000000
-+#define KG_SCH_PP_SHIFT_LOW			0x0000F000
-+#define KG_SCH_MODE_NIA_PLCR			0x40000000
-+#define KG_SCH_GEN_EXTRACT_TYPE			0x00008000
-+#define KG_SCH_BITMASK_MASK			0x000000FF
-+#define KG_SCH_GEN_VALID			0x80000000
-+#define KG_SCH_GEN_MASK				0x00FF0000
-+#define FM_PCD_KG_KGAR_ERR			0x20000000
-+#define FM_PCD_KG_KGAR_SEL_CLS_PLAN_ENTRY	0x01000000
-+#define FM_PCD_KG_KGAR_SEL_PORT_ENTRY		0x02000000
-+#define FM_PCD_KG_KGAR_SEL_PORT_WSEL_SP		0x00008000
-+#define FM_PCD_KG_KGAR_SEL_PORT_WSEL_CPP	0x00004000
-+#define FM_PCD_KG_KGAR_WSEL_MASK		0x0000FF00
-+#define KG_SCH_HASH_CONFIG_NO_FQID		0x80000000
-+#define KG_SCH_HASH_CONFIG_SYM			0x40000000
-+
-+#define FM_EX_KG_DOUBLE_ECC			0x80000000
-+#define FM_EX_KG_KEYSIZE_OVERFLOW		0x40000000
-+
-+/* ECC capture register */
-+#define KG_FMKG_SERC_CAP			0x80000000
-+#define KG_FMKG_SERC_CET			0x40000000
-+#define KG_FMKG_SERC_CNT_MSK			0x00FF0000
-+#define KG_FMKG_SERC_CNT_SHIFT			16
-+#define KG_FMKG_SERC_ADDR_MSK			0x000003FF
-+
-+/* Masks */
-+#define FM_KG_KGGCR_EN				0x80000000
-+#define KG_SCH_GEN_VALID			0x80000000
-+#define KG_SCH_GEN_EXTRACT_TYPE			0x00008000
-+#define KG_ERR_TYPE_DOUBLE			0x40000000
-+#define KG_ERR_ADDR_MASK			0x00000FFF
-+#define KG_SCH_MODE_EN				0x80000000
-+
-+/* shifts */
-+#define FM_KG_KGAR_NUM_SHIFT			16
-+#define FM_KG_PE_CPP_MASK_SHIFT			16
-+#define FM_KG_KGAR_WSEL_SHIFT			8
-+
-+#define FM_KG_SCH_GEN_HT_INVALID		0
-+
-+#define FM_KG_MASK_SEL_GEN_BASE			0x20
-+
-+#define KG_GET_MASK_SEL_SHIFT(shift, i)	\
-+switch (i)				\
-+{					\
-+	case 0: (shift) = 26; break;	\
-+	case 1: (shift) = 20; break;	\
-+	case 2: (shift) = 10; break;	\
-+	case 3: (shift) = 4; break;	\
-+	default: (shift) = 0;		\
-+}
-+
-+#define KG_GET_MASK_OFFSET_SHIFT(shift, i)	\
-+switch (i)				\
-+{					\
-+	case 0: (shift) = 16; break;	\
-+	case 1: (shift) = 0; break;	\
-+	case 2: (shift) = 28; break;	\
-+	case 3: (shift) = 24; break;	\
-+	default: (shift) = 0;		\
-+}
-+
-+#define KG_GET_MASK_SHIFT(shift, i)	\
-+switch (i)				\
-+{					\
-+	case 0: shift = 24; break;	\
-+	case 1: shift = 16; break;	\
-+	case 2: shift = 8;  break;	\
-+	case 3: shift = 0;  break;	\
-+	default: shift = 0;		\
-+}
-+
-+/* Port entry CPP register */
-+#define FMAN_KG_PE_CPP_MASK_SHIFT	16
-+
-+/* Scheme registers */
-+#define FMAN_KG_SCH_MODE_EN		0x80000000
-+#define FMAN_KG_SCH_MODE_NIA_PLCR	0x40000000
-+#define FMAN_KG_SCH_MODE_CCOBASE_SHIFT	24
-+
-+#define FMAN_KG_SCH_DEF_MAC_ADDR_SHIFT	30
-+#define FMAN_KG_SCH_DEF_VLAN_TCI_SHIFT	28
-+#define FMAN_KG_SCH_DEF_ETYPE_SHIFT	26
-+#define FMAN_KG_SCH_DEF_PPP_SID_SHIFT	24
-+#define FMAN_KG_SCH_DEF_PPP_PID_SHIFT	22
-+#define FMAN_KG_SCH_DEF_MPLS_SHIFT	20
-+#define FMAN_KG_SCH_DEF_IP_ADDR_SHIFT	18
-+#define FMAN_KG_SCH_DEF_PTYPE_SHIFT	16
-+#define FMAN_KG_SCH_DEF_IP_TOS_TC_SHIFT	14
-+#define FMAN_KG_SCH_DEF_IPv6_FL_SHIFT	12
-+#define FMAN_KG_SCH_DEF_IPSEC_SPI_SHIFT	10
-+#define FMAN_KG_SCH_DEF_L4_PORT_SHIFT	8
-+#define FMAN_KG_SCH_DEF_TCP_FLG_SHIFT	6
-+
-+#define FMAN_KG_SCH_GEN_VALID		0x80000000
-+#define FMAN_KG_SCH_GEN_SIZE_MAX	16
-+#define FMAN_KG_SCH_GEN_OR		0x00008000
-+
-+#define FMAN_KG_SCH_GEN_DEF_SHIFT	29
-+#define FMAN_KG_SCH_GEN_SIZE_SHIFT	24
-+#define FMAN_KG_SCH_GEN_MASK_SHIFT	16
-+#define FMAN_KG_SCH_GEN_HT_SHIFT	8
-+
-+#define FMAN_KG_SCH_HASH_HSHIFT_SHIFT	24
-+#define FMAN_KG_SCH_HASH_HSHIFT_MAX	0x28
-+#define FMAN_KG_SCH_HASH_SYM		0x40000000
-+#define FMAN_KG_SCH_HASH_NO_FQID_GEN	0x80000000
-+
-+#define FMAN_KG_SCH_PP_SH_SHIFT		27
-+#define FMAN_KG_SCH_PP_SL_SHIFT		12
-+#define FMAN_KG_SCH_PP_SH_MASK		0x80000000
-+#define FMAN_KG_SCH_PP_SL_MASK		0x0000F000
-+#define FMAN_KG_SCH_PP_SHIFT_MAX	0x17
-+#define FMAN_KG_SCH_PP_MASK_SHIFT	16
-+#define FMAN_KG_SCH_PP_NO_GEN		0x10000000
-+
-+enum fman_kg_gen_extract_src {
-+	E_FMAN_KG_GEN_EXTRACT_ETH,
-+	E_FMAN_KG_GEN_EXTRACT_ETYPE,
-+	E_FMAN_KG_GEN_EXTRACT_SNAP,
-+	E_FMAN_KG_GEN_EXTRACT_VLAN_TCI_1,
-+	E_FMAN_KG_GEN_EXTRACT_VLAN_TCI_N,
-+	E_FMAN_KG_GEN_EXTRACT_PPPoE,
-+	E_FMAN_KG_GEN_EXTRACT_MPLS_1,
-+	E_FMAN_KG_GEN_EXTRACT_MPLS_2,
-+	E_FMAN_KG_GEN_EXTRACT_MPLS_3,
-+	E_FMAN_KG_GEN_EXTRACT_MPLS_N,
-+	E_FMAN_KG_GEN_EXTRACT_IPv4_1,
-+	E_FMAN_KG_GEN_EXTRACT_IPv6_1,
-+	E_FMAN_KG_GEN_EXTRACT_IPv4_2,
-+	E_FMAN_KG_GEN_EXTRACT_IPv6_2,
-+	E_FMAN_KG_GEN_EXTRACT_MINENCAP,
-+	E_FMAN_KG_GEN_EXTRACT_IP_PID,
-+	E_FMAN_KG_GEN_EXTRACT_GRE,
-+	E_FMAN_KG_GEN_EXTRACT_TCP,
-+	E_FMAN_KG_GEN_EXTRACT_UDP,
-+	E_FMAN_KG_GEN_EXTRACT_SCTP,
-+	E_FMAN_KG_GEN_EXTRACT_DCCP,
-+	E_FMAN_KG_GEN_EXTRACT_IPSEC_AH,
-+	E_FMAN_KG_GEN_EXTRACT_IPSEC_ESP,
-+	E_FMAN_KG_GEN_EXTRACT_SHIM_1,
-+	E_FMAN_KG_GEN_EXTRACT_SHIM_2,
-+	E_FMAN_KG_GEN_EXTRACT_FROM_DFLT,
-+	E_FMAN_KG_GEN_EXTRACT_FROM_FRAME_START,
-+	E_FMAN_KG_GEN_EXTRACT_FROM_PARSE_RESULT,
-+	E_FMAN_KG_GEN_EXTRACT_FROM_END_OF_PARSE,
-+	E_FMAN_KG_GEN_EXTRACT_FROM_FQID
-+};
-+
-+struct fman_kg_ex_ecc_attr
-+{
-+	bool		valid;
-+	bool		double_ecc;
-+	uint16_t	addr;
-+	uint8_t		single_ecc_count;
-+};
-+
-+enum fman_kg_def_select
-+{
-+	E_FMAN_KG_DEF_GLOBAL_0,
-+	E_FMAN_KG_DEF_GLOBAL_1,
-+	E_FMAN_KG_DEF_SCHEME_0,
-+	E_FMAN_KG_DEF_SCHEME_1
-+};
-+
-+struct fman_kg_extract_def
-+{
-+	enum fman_kg_def_select	mac_addr;
-+	enum fman_kg_def_select	vlan_tci;
-+	enum fman_kg_def_select	etype;
-+	enum fman_kg_def_select	ppp_sid;
-+	enum fman_kg_def_select	ppp_pid;
-+	enum fman_kg_def_select	mpls;
-+	enum fman_kg_def_select	ip_addr;
-+	enum fman_kg_def_select	ptype;
-+	enum fman_kg_def_select	ip_tos_tc;
-+	enum fman_kg_def_select	ipv6_fl;
-+	enum fman_kg_def_select	ipsec_spi;
-+	enum fman_kg_def_select	l4_port;
-+	enum fman_kg_def_select	tcp_flg;
-+};
-+
-+enum fman_kg_gen_extract_type
-+{
-+	E_FMAN_KG_HASH_EXTRACT,
-+	E_FMAN_KG_OR_EXTRACT
-+};
-+
-+struct fman_kg_gen_extract_params
-+{
-+	/* Hash or Or-ed extract */
-+	enum fman_kg_gen_extract_type	type;
-+	enum fman_kg_gen_extract_src	src;
-+	bool				no_validation;
-+	/* Extraction offset from the header location specified above */
-+	uint8_t				offset;
-+	/* Size of extraction for FMAN_KG_HASH_EXTRACT,
-+	 * hash result shift for FMAN_KG_OR_EXTRACT */
-+	uint8_t				extract;
-+	uint8_t				mask;
-+	/* Default value to use when header specified
-+	 * by fman_kg_gen_extract_src doesn't present */
-+	enum fman_kg_def_select		def_val;
-+};
-+
-+struct fman_kg_extract_mask
-+{
-+	/**< Indication if mask is on known field extraction or
-+	 * on general extraction; TRUE for known field */
-+	bool		is_known;
-+	/**< One of FMAN_KG_EXTRACT_xxx defines for known fields mask and
-+	 * generic register index for generic extracts mask */
-+	uint32_t	field_or_gen_idx;
-+	/**< Byte offset from start of the extracted data specified
-+	 * by field_or_gen_idx */
-+	uint8_t		offset;
-+	/**< Byte mask (selected bits will be used) */
-+	uint8_t		mask;
-+};
-+
-+struct fman_kg_extract_params
-+{
-+	/* Or-ed mask of FMAN_KG_EXTRACT_xxx defines */
-+	uint32_t				known_fields;
-+	struct fman_kg_extract_def		known_fields_def;
-+	/* Number of entries in gen_extract */
-+	uint8_t					gen_extract_num;
-+	struct fman_kg_gen_extract_params	gen_extract[FM_KG_NUM_OF_GENERIC_REGS];
-+	/* Number of entries in masks */
-+	uint8_t					masks_num;
-+	struct fman_kg_extract_mask		masks[FM_KG_EXTRACT_MASKS_NUM];
-+	uint32_t				def_scheme_0;
-+	uint32_t				def_scheme_1;
-+};
-+
-+struct fman_kg_hash_params
-+{
-+	bool		use_hash;
-+	uint8_t		shift_r;
-+	uint32_t	mask; /**< 24-bit mask */
-+	bool		sym; /**< Symmetric hash for src and dest pairs */
-+};
-+
-+struct fman_kg_pp_params
-+{
-+	uint8_t		base;
-+	uint8_t		shift;
-+	uint8_t		mask;
-+	bool		bypass_pp_gen;
-+};
-+
-+struct fman_kg_cc_params
-+{
-+	uint8_t		base_offset;
-+	uint32_t	qlcv_bits_sel;
-+};
-+
-+enum fman_pcd_engine
-+{
-+	E_FMAN_PCD_INVALID = 0,	/**< Invalid PCD engine indicated*/
-+	E_FMAN_PCD_DONE,	/**< No PCD Engine indicated */
-+	E_FMAN_PCD_KG,		/**< Keygen indicated */
-+	E_FMAN_PCD_CC,		/**< Coarse classification indicated */
-+	E_FMAN_PCD_PLCR,	/**< Policer indicated */
-+	E_FMAN_PCD_PRS		/**< Parser indicated */
-+};
-+
-+struct fman_kg_cls_plan_params
-+{
-+	uint8_t entries_mask;
-+	uint32_t mask_vector[FM_KG_NUM_CLS_PLAN_ENTR];
-+};
-+
-+struct fman_kg_scheme_params
-+{
-+	uint32_t			match_vector;
-+	struct fman_kg_extract_params	extract_params;
-+	struct fman_kg_hash_params	hash_params;
-+	uint32_t			base_fqid;
-+	/* What we do w/features supported per FM version ?? */
-+	bool				bypass_fqid_gen;
-+	struct fman_kg_pp_params	policer_params;
-+	struct fman_kg_cc_params	cc_params;
-+	bool				update_counter;
-+	/**< counter_value: Set scheme counter to the specified value;
-+	 * relevant only when update_counter = TRUE. */
-+	uint32_t			counter_value;
-+	enum fman_pcd_engine		next_engine;
-+	/**< Next engine action code */
-+	uint32_t			next_engine_action;
-+};
-+
-+
-+
-+int fman_kg_write_ar_wait(struct fman_kg_regs *regs, uint32_t fmkg_ar);
-+void fman_kg_write_sp(struct fman_kg_regs *regs, uint32_t sp, bool add);
-+void fman_kg_write_cpp(struct fman_kg_regs *regs, uint32_t cpp);
-+void fman_kg_get_event(struct fman_kg_regs *regs,
-+			uint32_t *event,
-+			uint32_t *scheme_idx);
-+void fman_kg_init(struct fman_kg_regs *regs,
-+			uint32_t exceptions,
-+			uint32_t dflt_nia);
-+void fman_kg_enable_scheme_interrupts(struct fman_kg_regs *regs);
-+void fman_kg_enable(struct fman_kg_regs *regs);
-+void fman_kg_disable(struct fman_kg_regs *regs);
-+int fman_kg_write_bind_cls_plans(struct fman_kg_regs *regs,
-+					uint8_t hwport_id,
-+					uint32_t bind_cls_plans);
-+int fman_kg_build_bind_cls_plans(uint8_t grp_base,
-+					uint8_t grp_mask,
-+					uint32_t *bind_cls_plans);
-+int fman_kg_write_bind_schemes(struct fman_kg_regs *regs,
-+				uint8_t hwport_id,
-+				uint32_t schemes);
-+int fman_kg_write_cls_plan(struct fman_kg_regs *regs,
-+				uint8_t grp_id,
-+				uint8_t entries_mask,
-+				uint8_t hwport_id,
-+				struct fman_kg_cp_regs *cls_plan_regs);
-+int fman_kg_build_cls_plan(struct fman_kg_cls_plan_params *params,
-+				struct fman_kg_cp_regs *cls_plan_regs);
-+uint32_t fman_kg_get_schemes_total_counter(struct fman_kg_regs *regs);
-+int fman_kg_set_scheme_counter(struct fman_kg_regs *regs,
-+				uint8_t scheme_id,
-+				uint8_t hwport_id,
-+				uint32_t counter);
-+int fman_kg_get_scheme_counter(struct fman_kg_regs *regs,
-+				uint8_t scheme_id,
-+				uint8_t hwport_id,
-+				uint32_t *counter);
-+int fman_kg_delete_scheme(struct fman_kg_regs *regs,
-+				uint8_t scheme_id,
-+				uint8_t hwport_id);
-+int fman_kg_write_scheme(struct fman_kg_regs *regs,
-+				uint8_t scheme_id,
-+				uint8_t hwport_id,
-+				struct fman_kg_scheme_regs *scheme_regs,
-+				bool update_counter);
-+int fman_kg_build_scheme(struct fman_kg_scheme_params *params,
-+				struct fman_kg_scheme_regs *scheme_regs);
-+void fman_kg_get_capture(struct fman_kg_regs *regs,
-+				struct fman_kg_ex_ecc_attr *ecc_attr,
-+				bool clear);
-+void fman_kg_get_exception(struct fman_kg_regs *regs,
-+				uint32_t *events,
-+				uint32_t *scheme_ids,
-+				bool clear);
-+void fman_kg_set_exception(struct fman_kg_regs *regs,
-+				uint32_t exception,
-+				bool enable);
-+void fman_kg_set_dflt_val(struct fman_kg_regs *regs,
-+				uint8_t def_id,
-+				uint32_t val);
-+void fman_kg_set_data_after_prs(struct fman_kg_regs *regs, uint8_t offset);
-+
-+
-+	
-+/**************************************************************************//**
-+  @Description       NIA Description
-+*//***************************************************************************/
-+#define KG_NIA_ORDER_RESTOR	0x00800000
-+#define KG_NIA_ENG_FM_CTL	0x00000000
-+#define KG_NIA_ENG_PRS		0x00440000
-+#define KG_NIA_ENG_KG		0x00480000
-+#define KG_NIA_ENG_PLCR		0x004C0000
-+#define KG_NIA_ENG_BMI		0x00500000
-+#define KG_NIA_ENG_QMI_ENQ	0x00540000
-+#define KG_NIA_ENG_QMI_DEQ	0x00580000
-+#define KG_NIA_ENG_MASK		0x007C0000
-+
-+#define KG_NIA_AC_MASK		0x0003FFFF
-+
-+#define KG_NIA_INVALID		0xFFFFFFFF
-+
-+static __inline__ uint32_t fm_kg_build_nia(enum fman_pcd_engine next_engine,
-+					uint32_t next_engine_action)
-+{
-+	uint32_t nia;
-+
-+	if (next_engine_action & ~KG_NIA_AC_MASK)
-+		return KG_NIA_INVALID;
-+
-+	switch (next_engine) {
-+	case E_FMAN_PCD_DONE:
-+		nia = KG_NIA_ENG_BMI | next_engine_action;
-+		break;
-+
-+	case E_FMAN_PCD_KG:
-+		nia = KG_NIA_ENG_KG | next_engine_action;
-+		break;
-+
-+	case E_FMAN_PCD_CC:
-+		nia = KG_NIA_ENG_FM_CTL | next_engine_action;
-+		break;
-+
-+	case E_FMAN_PCD_PLCR:
-+		nia = KG_NIA_ENG_PLCR | next_engine_action;
-+		break;
-+
-+	default:
-+		nia = KG_NIA_INVALID;
-+	}
-+
-+	return nia;
-+}
-+
-+#endif /* __FSL_FMAN_KG_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_memac.h
-@@ -0,0 +1,427 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#ifndef __FSL_FMAN_MEMAC_H
-+#define __FSL_FMAN_MEMAC_H
-+
-+#include "common/general.h"
-+#include "fsl_enet.h"
-+
-+
-+#define MEMAC_NUM_OF_PADDRS 7 /* Num of additional exact match MAC adr regs */
-+
-+/* Control and Configuration Register (COMMAND_CONFIG) */
-+#define CMD_CFG_MG		0x80000000 /* 00 Magic Packet detection */
-+#define CMD_CFG_REG_LOWP_RXETY	0x01000000 /* 07 Rx low power indication */
-+#define CMD_CFG_TX_LOWP_ENA	0x00800000 /* 08 Tx Low Power Idle Enable */
-+#define CMD_CFG_SFD_ANY		0x00200000 /* 10 Disable SFD check */
-+#define CMD_CFG_PFC_MODE	0x00080000 /* 12 Enable PFC */
-+#define CMD_CFG_NO_LEN_CHK	0x00020000 /* 14 Payload length check disable */
-+#define CMD_CFG_SEND_IDLE	0x00010000 /* 15 Force idle generation */
-+#define CMD_CFG_CNT_FRM_EN	0x00002000 /* 18 Control frame rx enable */
-+#define CMD_CFG_SW_RESET	0x00001000 /* 19 S/W Reset, self clearing bit */
-+#define CMD_CFG_TX_PAD_EN	0x00000800 /* 20 Enable Tx padding of frames */
-+#define CMD_CFG_LOOPBACK_EN	0x00000400 /* 21 XGMII/GMII loopback enable */
-+#define CMD_CFG_TX_ADDR_INS	0x00000200 /* 22 Tx source MAC addr insertion */
-+#define CMD_CFG_PAUSE_IGNORE	0x00000100 /* 23 Ignore Pause frame quanta */
-+#define CMD_CFG_PAUSE_FWD	0x00000080 /* 24 Terminate/frwd Pause frames */
-+#define CMD_CFG_CRC_FWD		0x00000040 /* 25 Terminate/frwd CRC of frames */
-+#define CMD_CFG_PAD_EN		0x00000020 /* 26 Frame padding removal */
-+#define CMD_CFG_PROMIS_EN	0x00000010 /* 27 Promiscuous operation enable */
-+#define CMD_CFG_WAN_MODE	0x00000008 /* 28 WAN mode enable */
-+#define CMD_CFG_RX_EN		0x00000002 /* 30 MAC receive path enable */
-+#define CMD_CFG_TX_EN		0x00000001 /* 31 MAC transmit path enable */
-+
-+/* Transmit FIFO Sections Register (TX_FIFO_SECTIONS) */
-+#define TX_FIFO_SECTIONS_TX_EMPTY_MASK			0xFFFF0000
-+#define TX_FIFO_SECTIONS_TX_AVAIL_MASK			0x0000FFFF
-+#define TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_10G	0x00400000
-+#define TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_1G	0x00100000
-+#define TX_FIFO_SECTIONS_TX_EMPTY_PFC_10G		0x00360000
-+#define TX_FIFO_SECTIONS_TX_EMPTY_PFC_1G		0x00040000
-+#define TX_FIFO_SECTIONS_TX_AVAIL_10G			0x00000019
-+#define TX_FIFO_SECTIONS_TX_AVAIL_1G			0x00000020
-+#define TX_FIFO_SECTIONS_TX_AVAIL_SLOW_10G		0x00000060
-+
-+#define GET_TX_EMPTY_DEFAULT_VALUE(_val)					\
-+_val &= ~TX_FIFO_SECTIONS_TX_EMPTY_MASK;					\
-+((_val == TX_FIFO_SECTIONS_TX_AVAIL_10G) ?					\
-+		(_val |= TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_10G) :	\
-+		(_val |= TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_1G));
-+
-+#define GET_TX_EMPTY_PFC_VALUE(_val)						\
-+_val &= ~TX_FIFO_SECTIONS_TX_EMPTY_MASK;					\
-+((_val == TX_FIFO_SECTIONS_TX_AVAIL_10G) ?					\
-+		(_val |= TX_FIFO_SECTIONS_TX_EMPTY_PFC_10G) :		\
-+		(_val |= TX_FIFO_SECTIONS_TX_EMPTY_PFC_1G));
-+
-+/* Interface Mode Register (IF_MODE) */
-+#define IF_MODE_MASK		0x00000003 /* 30-31 Mask on i/f mode bits */
-+#define IF_MODE_XGMII		0x00000000 /* 30-31 XGMII (10G) interface */
-+#define IF_MODE_GMII		0x00000002 /* 30-31 GMII (1G) interface */
-+#define IF_MODE_RGMII		0x00000004
-+#define IF_MODE_RGMII_AUTO	0x00008000
-+#define IF_MODE_RGMII_1000  0x00004000 /* 10 - 1000Mbps RGMII */
-+#define IF_MODE_RGMII_100   0x00000000 /* 00 - 100Mbps RGMII */
-+#define IF_MODE_RGMII_10    0x00002000 /* 01 - 10Mbps RGMII */
-+#define IF_MODE_RGMII_SP_MASK 0x00006000 /* Setsp mask bits */
-+#define IF_MODE_RGMII_FD    0x00001000 /* Full duplex RGMII */
-+#define IF_MODE_HD          0x00000040 /* Half duplex operation */
-+
-+/* Hash table Control Register (HASHTABLE_CTRL) */
-+#define HASH_CTRL_MCAST_SHIFT	26
-+#define HASH_CTRL_MCAST_EN	0x00000100 /* 23 Mcast frame rx for hash */
-+#define HASH_CTRL_ADDR_MASK	0x0000003F /* 26-31 Hash table address code */
-+
-+#define GROUP_ADDRESS		0x0000010000000000LL /* MAC mcast indication */
-+#define HASH_TABLE_SIZE		64 /* Hash tbl size */
-+
-+/* Transmit Inter-Packet Gap Length Register (TX_IPG_LENGTH) */
-+#define MEMAC_TX_IPG_LENGTH_MASK	0x0000003F
-+
-+/* Statistics Configuration Register (STATN_CONFIG) */
-+#define STATS_CFG_CLR		0x00000004 /* 29 Reset all counters */
-+#define STATS_CFG_CLR_ON_RD	0x00000002 /* 30 Clear on read */
-+#define STATS_CFG_SATURATE	0x00000001 /* 31 Saturate at the maximum val */
-+
-+/* Interrupt Mask Register (IMASK) */
-+#define MEMAC_IMASK_MGI		0x40000000 /* 1 Magic pkt detect indication */
-+#define MEMAC_IMASK_TSECC_ER 0x20000000 /* 2 Timestamp FIFO ECC error evnt */
-+#define MEMAC_IMASK_TECC_ER	0x02000000 /* 6 Transmit frame ECC error evnt */
-+#define MEMAC_IMASK_RECC_ER	0x01000000 /* 7 Receive frame ECC error evnt */
-+
-+#define MEMAC_ALL_ERRS_IMASK			\
-+		((uint32_t)(MEMAC_IMASK_TSECC_ER	| \
-+			MEMAC_IMASK_TECC_ER	| \
-+			MEMAC_IMASK_RECC_ER	| \
-+			MEMAC_IMASK_MGI))
-+
-+#define MEMAC_IEVNT_PCS			0x80000000 /* PCS (XG). Link sync (G) */
-+#define MEMAC_IEVNT_AN			0x40000000 /* Auto-negotiation */
-+#define MEMAC_IEVNT_LT			0x20000000 /* Link Training/New page */
-+#define MEMAC_IEVNT_MGI			0x00004000 /* Magic pkt detection */
-+#define MEMAC_IEVNT_TS_ECC_ER   0x00002000 /* Timestamp FIFO ECC error */
-+#define MEMAC_IEVNT_RX_FIFO_OVFL	0x00001000 /* Rx FIFO overflow */
-+#define MEMAC_IEVNT_TX_FIFO_UNFL	0x00000800 /* Tx FIFO underflow */
-+#define MEMAC_IEVNT_TX_FIFO_OVFL	0x00000400 /* Tx FIFO overflow */
-+#define MEMAC_IEVNT_TX_ECC_ER		0x00000200 /* Tx frame ECC error */
-+#define MEMAC_IEVNT_RX_ECC_ER		0x00000100 /* Rx frame ECC error */
-+#define MEMAC_IEVNT_LI_FAULT		0x00000080 /* Link Interruption flt */
-+#define MEMAC_IEVNT_RX_EMPTY		0x00000040 /* Rx FIFO empty */
-+#define MEMAC_IEVNT_TX_EMPTY		0x00000020 /* Tx FIFO empty */
-+#define MEMAC_IEVNT_RX_LOWP		0x00000010 /* Low Power Idle */
-+#define MEMAC_IEVNT_PHY_LOS		0x00000004 /* Phy loss of signal */
-+#define MEMAC_IEVNT_REM_FAULT		0x00000002 /* Remote fault (XGMII) */
-+#define MEMAC_IEVNT_LOC_FAULT		0x00000001 /* Local fault (XGMII) */
-+
-+enum memac_counters {
-+	E_MEMAC_COUNTER_R64,
-+	E_MEMAC_COUNTER_R127,
-+	E_MEMAC_COUNTER_R255,
-+	E_MEMAC_COUNTER_R511,
-+	E_MEMAC_COUNTER_R1023,
-+	E_MEMAC_COUNTER_R1518,
-+	E_MEMAC_COUNTER_R1519X,
-+	E_MEMAC_COUNTER_RFRG,
-+	E_MEMAC_COUNTER_RJBR,
-+	E_MEMAC_COUNTER_RDRP,
-+	E_MEMAC_COUNTER_RALN,
-+	E_MEMAC_COUNTER_TUND,
-+	E_MEMAC_COUNTER_ROVR,
-+	E_MEMAC_COUNTER_RXPF,
-+	E_MEMAC_COUNTER_TXPF,
-+	E_MEMAC_COUNTER_ROCT,
-+	E_MEMAC_COUNTER_RMCA,
-+	E_MEMAC_COUNTER_RBCA,
-+	E_MEMAC_COUNTER_RPKT,
-+	E_MEMAC_COUNTER_RUCA,
-+	E_MEMAC_COUNTER_RERR,
-+	E_MEMAC_COUNTER_TOCT,
-+	E_MEMAC_COUNTER_TMCA,
-+	E_MEMAC_COUNTER_TBCA,
-+	E_MEMAC_COUNTER_TUCA,
-+	E_MEMAC_COUNTER_TERR
-+};
-+
-+#define DEFAULT_PAUSE_QUANTA	0xf000
-+#define DEFAULT_FRAME_LENGTH	0x600
-+#define DEFAULT_TX_IPG_LENGTH	12
-+
-+/*
-+ * memory map
-+ */
-+
-+struct mac_addr {
-+	uint32_t   mac_addr_l;	/* Lower 32 bits of 48-bit MAC address */
-+	uint32_t   mac_addr_u;	/* Upper 16 bits of 48-bit MAC address */
-+};
-+
-+struct memac_regs {
-+	/* General Control and Status */
-+	uint32_t res0000[2];
-+	uint32_t command_config;	/* 0x008 Ctrl and cfg */
-+	struct mac_addr mac_addr0;	/* 0x00C-0x010 MAC_ADDR_0...1 */
-+	uint32_t maxfrm;		/* 0x014 Max frame length */
-+	uint32_t res0018[1];
-+	uint32_t rx_fifo_sections;	/* Receive FIFO configuration reg */
-+	uint32_t tx_fifo_sections;	/* Transmit FIFO configuration reg */
-+	uint32_t res0024[2];
-+	uint32_t hashtable_ctrl;	/* 0x02C Hash table control */
-+	uint32_t res0030[4];
-+	uint32_t ievent;		/* 0x040 Interrupt event */
-+	uint32_t tx_ipg_length;		/* 0x044 Transmitter inter-packet-gap */
-+	uint32_t res0048;
-+	uint32_t imask;			/* 0x04C Interrupt mask */
-+	uint32_t res0050;
-+	uint32_t pause_quanta[4];	/* 0x054 Pause quanta */
-+	uint32_t pause_thresh[4];	/* 0x064 Pause quanta threshold */
-+	uint32_t rx_pause_status;	/* 0x074 Receive pause status */
-+	uint32_t res0078[2];
-+	struct mac_addr mac_addr[MEMAC_NUM_OF_PADDRS]; /* 0x80-0x0B4 mac padr */
-+	uint32_t lpwake_timer;		/* 0x0B8 Low Power Wakeup Timer */
-+	uint32_t sleep_timer;		/* 0x0BC Transmit EEE Low Power Timer */
-+	uint32_t res00c0[8];
-+	uint32_t statn_config;		/* 0x0E0 Statistics configuration */
-+	uint32_t res00e4[7];
-+	/* Rx Statistics Counter */
-+	uint32_t reoct_l;
-+	uint32_t reoct_u;
-+	uint32_t roct_l;
-+	uint32_t roct_u;
-+	uint32_t raln_l;
-+	uint32_t raln_u;
-+	uint32_t rxpf_l;
-+	uint32_t rxpf_u;
-+	uint32_t rfrm_l;
-+	uint32_t rfrm_u;
-+	uint32_t rfcs_l;
-+	uint32_t rfcs_u;
-+	uint32_t rvlan_l;
-+	uint32_t rvlan_u;
-+	uint32_t rerr_l;
-+	uint32_t rerr_u;
-+	uint32_t ruca_l;
-+	uint32_t ruca_u;
-+	uint32_t rmca_l;
-+	uint32_t rmca_u;
-+	uint32_t rbca_l;
-+	uint32_t rbca_u;
-+	uint32_t rdrp_l;
-+	uint32_t rdrp_u;
-+	uint32_t rpkt_l;
-+	uint32_t rpkt_u;
-+	uint32_t rund_l;
-+	uint32_t rund_u;
-+	uint32_t r64_l;
-+	uint32_t r64_u;
-+	uint32_t r127_l;
-+	uint32_t r127_u;
-+	uint32_t r255_l;
-+	uint32_t r255_u;
-+	uint32_t r511_l;
-+	uint32_t r511_u;
-+	uint32_t r1023_l;
-+	uint32_t r1023_u;
-+	uint32_t r1518_l;
-+	uint32_t r1518_u;
-+	uint32_t r1519x_l;
-+	uint32_t r1519x_u;
-+	uint32_t rovr_l;
-+	uint32_t rovr_u;
-+	uint32_t rjbr_l;
-+	uint32_t rjbr_u;
-+	uint32_t rfrg_l;
-+	uint32_t rfrg_u;
-+	uint32_t rcnp_l;
-+	uint32_t rcnp_u;
-+	uint32_t rdrntp_l;
-+	uint32_t rdrntp_u;
-+	uint32_t res01d0[12];
-+	/* Tx Statistics Counter */
-+	uint32_t teoct_l;
-+	uint32_t teoct_u;
-+	uint32_t toct_l;
-+	uint32_t toct_u;
-+	uint32_t res0210[2];
-+	uint32_t txpf_l;
-+	uint32_t txpf_u;
-+	uint32_t tfrm_l;
-+	uint32_t tfrm_u;
-+	uint32_t tfcs_l;
-+	uint32_t tfcs_u;
-+	uint32_t tvlan_l;
-+	uint32_t tvlan_u;
-+	uint32_t terr_l;
-+	uint32_t terr_u;
-+	uint32_t tuca_l;
-+	uint32_t tuca_u;
-+	uint32_t tmca_l;
-+	uint32_t tmca_u;
-+	uint32_t tbca_l;
-+	uint32_t tbca_u;
-+	uint32_t res0258[2];
-+	uint32_t tpkt_l;
-+	uint32_t tpkt_u;
-+	uint32_t tund_l;
-+	uint32_t tund_u;
-+	uint32_t t64_l;
-+	uint32_t t64_u;
-+	uint32_t t127_l;
-+	uint32_t t127_u;
-+	uint32_t t255_l;
-+	uint32_t t255_u;
-+	uint32_t t511_l;
-+	uint32_t t511_u;
-+	uint32_t t1023_l;
-+	uint32_t t1023_u;
-+	uint32_t t1518_l;
-+	uint32_t t1518_u;
-+	uint32_t t1519x_l;
-+	uint32_t t1519x_u;
-+	uint32_t res02a8[6];
-+	uint32_t tcnp_l;
-+	uint32_t tcnp_u;
-+	uint32_t res02c8[14];
-+	/* Line Interface Control */
-+	uint32_t if_mode;		/* 0x300 Interface Mode Control */
-+	uint32_t if_status;		/* 0x304 Interface Status */
-+	uint32_t res0308[14];
-+	/* HiGig/2 */
-+	uint32_t hg_config;		/* 0x340 Control and cfg */
-+	uint32_t res0344[3];
-+	uint32_t hg_pause_quanta;	/* 0x350 Pause quanta */
-+	uint32_t res0354[3];
-+	uint32_t hg_pause_thresh;	/* 0x360 Pause quanta threshold */
-+	uint32_t res0364[3];
-+	uint32_t hgrx_pause_status;	/* 0x370 Receive pause status */
-+	uint32_t hg_fifos_status;	/* 0x374 fifos status */
-+	uint32_t rhm;			/* 0x378 rx messages counter */
-+	uint32_t thm;			/* 0x37C tx messages counter */
-+};
-+
-+struct memac_cfg {
-+	bool		reset_on_init;
-+	bool		rx_error_discard;
-+	bool		pause_ignore;
-+	bool		pause_forward_enable;
-+	bool		no_length_check_enable;
-+	bool		cmd_frame_enable;
-+	bool		send_idle_enable;
-+	bool		wan_mode_enable;
-+	bool		promiscuous_mode_enable;
-+	bool		tx_addr_ins_enable;
-+	bool		loopback_enable;
-+	bool		lgth_check_nostdr;
-+	bool		time_stamp_enable;
-+	bool		pad_enable;
-+	bool		phy_tx_ena_on;
-+	bool		rx_sfd_any;
-+	bool		rx_pbl_fwd;
-+	bool		tx_pbl_fwd;
-+	bool		debug_mode;
-+	bool		wake_on_lan;
-+	uint16_t	max_frame_length;
-+	uint16_t	pause_quanta;
-+	uint32_t	tx_ipg_length;
-+};
-+
-+
-+/**
-+ * fman_memac_defconfig() - Get default MEMAC configuration
-+ * @cfg:    pointer to configuration structure.
-+ *
-+ * Call this function to obtain a default set of configuration values for
-+ * initializing MEMAC. The user can overwrite any of the values before calling
-+ * fman_memac_init(), if specific configuration needs to be applied.
-+ */
-+void fman_memac_defconfig(struct memac_cfg *cfg);
-+
-+int fman_memac_init(struct memac_regs *regs,
-+	struct memac_cfg *cfg,
-+	enum enet_interface enet_interface,
-+	enum enet_speed enet_speed,
-+	bool slow_10g_if,
-+	uint32_t exceptions);
-+
-+void fman_memac_enable(struct memac_regs *regs, bool apply_rx, bool apply_tx);
-+
-+void fman_memac_disable(struct memac_regs *regs, bool apply_rx, bool apply_tx);
-+
-+void fman_memac_set_promiscuous(struct memac_regs *regs, bool val);
-+
-+void fman_memac_add_addr_in_paddr(struct memac_regs *regs,
-+	uint8_t *adr,
-+	uint8_t paddr_num);
-+
-+void fman_memac_clear_addr_in_paddr(struct memac_regs *regs,
-+	uint8_t paddr_num);
-+
-+uint64_t fman_memac_get_counter(struct memac_regs *regs,
-+	enum memac_counters reg_name);
-+
-+void fman_memac_set_tx_pause_frames(struct memac_regs *regs,
-+	uint8_t priority, uint16_t pauseTime, uint16_t threshTime);
-+
-+uint16_t fman_memac_get_max_frame_len(struct memac_regs *regs);
-+
-+void fman_memac_set_exception(struct memac_regs *regs, uint32_t val,
-+	bool enable);
-+
-+void fman_memac_reset_stat(struct memac_regs *regs);
-+
-+void fman_memac_reset(struct memac_regs *regs);
-+
-+void fman_memac_reset_filter_table(struct memac_regs *regs);
-+
-+void fman_memac_set_hash_table_entry(struct memac_regs *regs, uint32_t crc);
-+
-+void fman_memac_set_hash_table(struct memac_regs *regs, uint32_t val);
-+
-+void fman_memac_set_rx_ignore_pause_frames(struct memac_regs *regs,
-+	bool enable);
-+
-+void fman_memac_set_wol(struct memac_regs *regs, bool enable);
-+
-+uint32_t fman_memac_get_event(struct memac_regs *regs, uint32_t ev_mask);
-+
-+void fman_memac_ack_event(struct memac_regs *regs, uint32_t ev_mask);
-+
-+uint32_t fman_memac_get_interrupt_mask(struct memac_regs *regs);
-+
-+void fman_memac_adjust_link(struct memac_regs *regs,
-+	enum enet_interface iface_mode,
-+	enum enet_speed speed, bool full_dx);
-+
-+
-+
-+#endif /*__FSL_FMAN_MEMAC_H*/
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_memac_mii_acc.h
-@@ -0,0 +1,78 @@
-+/*
-+ * Copyright 2008-2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __FSL_FMAN_MEMAC_MII_ACC_H
-+#define __FSL_FMAN_MEMAC_MII_ACC_H
-+
-+#include "common/general.h"
-+#include "fsl_enet.h"
-+/* MII Management Registers */
-+#define MDIO_CFG_CLK_DIV_MASK       0x0080ff80
-+#define MDIO_CFG_CLK_DIV_SHIFT      7
-+#define MDIO_CFG_HOLD_MASK          0x0000001c
-+#define MDIO_CFG_ENC45              0x00000040
-+#define MDIO_CFG_READ_ERR           0x00000002
-+#define MDIO_CFG_BSY                0x00000001
-+
-+#define MDIO_CTL_PHY_ADDR_SHIFT     5
-+#define MDIO_CTL_READ               0x00008000
-+
-+#define MDIO_DATA_BSY               0x80000000
-+
-+/*MEMAC Internal PHY Registers - SGMII */
-+#define PHY_SGMII_CR_PHY_RESET          0x8000
-+#define PHY_SGMII_CR_RESET_AN           0x0200
-+#define PHY_SGMII_CR_DEF_VAL            0x1140
-+#define PHY_SGMII_DEV_ABILITY_SGMII     0x4001
-+#define PHY_SGMII_DEV_ABILITY_1000X     0x01A0
-+#define PHY_SGMII_IF_MODE_AN            0x0002
-+#define PHY_SGMII_IF_MODE_SGMII         0x0001
-+#define PHY_SGMII_IF_MODE_1000X         0x0000
-+
-+/*----------------------------------------------------*/
-+/* MII Configuration Control Memory Map Registers     */
-+/*----------------------------------------------------*/
-+struct memac_mii_access_mem_map {
-+	uint32_t   mdio_cfg;       /* 0x030  */
-+	uint32_t   mdio_ctrl;      /* 0x034  */
-+	uint32_t   mdio_data;      /* 0x038  */
-+	uint32_t   mdio_addr;      /* 0x03c  */
-+};
-+
-+int fman_memac_mii_read_phy_reg(struct memac_mii_access_mem_map *mii_regs,
-+	uint8_t phy_addr, uint8_t reg, uint16_t *data,
-+	enum enet_speed enet_speed);
-+int fman_memac_mii_write_phy_reg(struct memac_mii_access_mem_map *mii_regs,
-+	uint8_t phy_addr, uint8_t reg, uint16_t data,
-+	enum enet_speed enet_speed);
-+
-+#endif /* __MAC_API_MEMAC_MII_ACC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_port.h
-@@ -0,0 +1,593 @@
-+/*
-+ * Copyright 2008-2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __FSL_FMAN_PORT_H
-+#define __FSL_FMAN_PORT_H
-+
-+#include "fsl_fman_sp.h"
-+
-+/** @Collection  Registers bit fields */
-+
-+/** @Description  BMI defines */
-+#define BMI_EBD_EN                              0x80000000
-+
-+#define BMI_PORT_CFG_EN				0x80000000
-+#define BMI_PORT_CFG_FDOVR			0x02000000
-+#define BMI_PORT_CFG_IM				0x01000000
-+
-+#define BMI_PORT_STATUS_BSY			0x80000000
-+
-+#define BMI_DMA_ATTR_SWP_SHIFT			FMAN_SP_DMA_ATTR_SWP_SHIFT
-+#define BMI_DMA_ATTR_IC_STASH_ON		0x10000000
-+#define BMI_DMA_ATTR_HDR_STASH_ON		0x04000000
-+#define BMI_DMA_ATTR_SG_STASH_ON		0x01000000
-+#define BMI_DMA_ATTR_WRITE_OPTIMIZE		FMAN_SP_DMA_ATTR_WRITE_OPTIMIZE
-+
-+#define BMI_RX_FIFO_PRI_ELEVATION_SHIFT		16
-+#define BMI_RX_FIFO_THRESHOLD_ETHE		0x80000000
-+
-+#define BMI_TX_FRAME_END_CS_IGNORE_SHIFT	24
-+#define BMI_RX_FRAME_END_CS_IGNORE_SHIFT	24
-+#define BMI_RX_FRAME_END_CUT_SHIFT		16
-+
-+#define BMI_IC_TO_EXT_SHIFT			FMAN_SP_IC_TO_EXT_SHIFT
-+#define BMI_IC_FROM_INT_SHIFT			FMAN_SP_IC_FROM_INT_SHIFT
-+
-+#define BMI_INT_BUF_MARG_SHIFT			28
-+#define BMI_EXT_BUF_MARG_START_SHIFT		FMAN_SP_EXT_BUF_MARG_START_SHIFT
-+
-+#define BMI_CMD_MR_LEAC				0x00200000
-+#define BMI_CMD_MR_SLEAC			0x00100000
-+#define BMI_CMD_MR_MA				0x00080000
-+#define BMI_CMD_MR_DEAS				0x00040000
-+#define BMI_CMD_RX_MR_DEF			(BMI_CMD_MR_LEAC | \
-+						BMI_CMD_MR_SLEAC | \
-+						BMI_CMD_MR_MA | \
-+						BMI_CMD_MR_DEAS)
-+#define BMI_CMD_TX_MR_DEF			0
-+#define BMI_CMD_OP_MR_DEF			(BMI_CMD_MR_DEAS | \
-+						BMI_CMD_MR_MA)
-+
-+#define BMI_CMD_ATTR_ORDER			0x80000000
-+#define BMI_CMD_ATTR_SYNC			0x02000000
-+#define BMI_CMD_ATTR_COLOR_SHIFT		26
-+
-+#define BMI_FIFO_PIPELINE_DEPTH_SHIFT           12
-+#define BMI_NEXT_ENG_FD_BITS_SHIFT		24
-+#define BMI_FRAME_END_CS_IGNORE_SHIFT           24
-+
-+#define BMI_COUNTERS_EN				0x80000000
-+
-+#define BMI_EXT_BUF_POOL_VALID			FMAN_SP_EXT_BUF_POOL_VALID
-+#define BMI_EXT_BUF_POOL_EN_COUNTER		FMAN_SP_EXT_BUF_POOL_EN_COUNTER
-+#define BMI_EXT_BUF_POOL_BACKUP			FMAN_SP_EXT_BUF_POOL_BACKUP
-+#define BMI_EXT_BUF_POOL_ID_SHIFT		16
-+#define BMI_EXT_BUF_POOL_ID_MASK		0x003F0000
-+#define BMI_POOL_DEP_NUM_OF_POOLS_SHIFT		16
-+
-+#define BMI_TX_FIFO_MIN_FILL_SHIFT		16
-+#define BMI_TX_FIFO_PIPELINE_DEPTH_SHIFT	12
-+
-+#define MAX_PERFORMANCE_TASK_COMP		64
-+#define MAX_PERFORMANCE_RX_QUEUE_COMP		64
-+#define MAX_PERFORMANCE_TX_QUEUE_COMP		8
-+#define MAX_PERFORMANCE_DMA_COMP		16
-+#define MAX_PERFORMANCE_FIFO_COMP		1024
-+
-+#define BMI_PERFORMANCE_TASK_COMP_SHIFT		24
-+#define BMI_PERFORMANCE_QUEUE_COMP_SHIFT	16
-+#define BMI_PERFORMANCE_DMA_COMP_SHIFT		12
-+
-+#define BMI_RATE_LIMIT_GRAN_TX			16000 /* In Kbps */
-+#define BMI_RATE_LIMIT_GRAN_OP			10000 /* In frames */
-+#define BMI_RATE_LIMIT_MAX_RATE_IN_GRAN_UNITS	1024
-+#define BMI_RATE_LIMIT_MAX_BURST_SIZE		1024 /* In KBytes */
-+#define BMI_RATE_LIMIT_MAX_BURST_SHIFT		16
-+#define BMI_RATE_LIMIT_HIGH_BURST_SIZE_GRAN	0x80000000
-+#define BMI_RATE_LIMIT_SCALE_TSBS_SHIFT		16
-+#define BMI_RATE_LIMIT_SCALE_EN			0x80000000
-+#define BMI_SG_DISABLE                          FMAN_SP_SG_DISABLE
-+
-+/** @Description  QMI defines */
-+#define QMI_PORT_CFG_EN				0x80000000
-+#define QMI_PORT_CFG_EN_COUNTERS		0x10000000
-+
-+#define QMI_PORT_STATUS_DEQ_TNUM_BSY		0x80000000
-+#define QMI_PORT_STATUS_DEQ_FD_BSY		0x20000000
-+
-+#define QMI_DEQ_CFG_PRI				0x80000000
-+#define QMI_DEQ_CFG_TYPE1			0x10000000
-+#define QMI_DEQ_CFG_TYPE2			0x20000000
-+#define QMI_DEQ_CFG_TYPE3			0x30000000
-+#define QMI_DEQ_CFG_PREFETCH_PARTIAL		0x01000000
-+#define QMI_DEQ_CFG_PREFETCH_FULL		0x03000000
-+#define QMI_DEQ_CFG_SP_MASK			0xf
-+#define QMI_DEQ_CFG_SP_SHIFT			20
-+
-+
-+/** @Description  General port defines */
-+#define FMAN_PORT_EXT_POOLS_NUM(fm_rev_maj) \
-+		(((fm_rev_maj) == 4) ? 4 : 8)
-+#define FMAN_PORT_MAX_EXT_POOLS_NUM	8
-+#define FMAN_PORT_OBS_EXT_POOLS_NUM	2
-+#define FMAN_PORT_CG_MAP_NUM		8
-+#define FMAN_PORT_PRS_RESULT_WORDS_NUM	8
-+#define FMAN_PORT_BMI_FIFO_UNITS	0x100
-+#define FMAN_PORT_IC_OFFSET_UNITS	0x10
-+
-+
-+/** @Collection    FM Port Register Map */
-+
-+/** @Description   BMI Rx port register map */
-+struct fman_port_rx_bmi_regs {
-+	uint32_t fmbm_rcfg;		/**< Rx Configuration */
-+	uint32_t fmbm_rst;		/**< Rx Status */
-+	uint32_t fmbm_rda;		/**< Rx DMA attributes*/
-+	uint32_t fmbm_rfp;		/**< Rx FIFO Parameters*/
-+	uint32_t fmbm_rfed;		/**< Rx Frame End Data*/
-+	uint32_t fmbm_ricp;		/**< Rx Internal Context Parameters*/
-+	uint32_t fmbm_rim;		/**< Rx Internal Buffer Margins*/
-+	uint32_t fmbm_rebm;		/**< Rx External Buffer Margins*/
-+	uint32_t fmbm_rfne;		/**< Rx Frame Next Engine*/
-+	uint32_t fmbm_rfca;		/**< Rx Frame Command Attributes.*/
-+	uint32_t fmbm_rfpne;		/**< Rx Frame Parser Next Engine*/
-+	uint32_t fmbm_rpso;		/**< Rx Parse Start Offset*/
-+	uint32_t fmbm_rpp;		/**< Rx Policer Profile  */
-+	uint32_t fmbm_rccb;		/**< Rx Coarse Classification Base */
-+	uint32_t fmbm_reth;		/**< Rx Excessive Threshold */
-+	uint32_t reserved003c[1];	/**< (0x03C 0x03F) */
-+	uint32_t fmbm_rprai[FMAN_PORT_PRS_RESULT_WORDS_NUM];
-+					/**< Rx Parse Results Array Init*/
-+	uint32_t fmbm_rfqid;		/**< Rx Frame Queue ID*/
-+	uint32_t fmbm_refqid;		/**< Rx Error Frame Queue ID*/
-+	uint32_t fmbm_rfsdm;		/**< Rx Frame Status Discard Mask*/
-+	uint32_t fmbm_rfsem;		/**< Rx Frame Status Error Mask*/
-+	uint32_t fmbm_rfene;		/**< Rx Frame Enqueue Next Engine */
-+	uint32_t reserved0074[0x2];	/**< (0x074-0x07C)  */
-+	uint32_t fmbm_rcmne;		/**< Rx Frame Continuous Mode Next Engine */
-+	uint32_t reserved0080[0x20];/**< (0x080 0x0FF)  */
-+	uint32_t fmbm_ebmpi[FMAN_PORT_MAX_EXT_POOLS_NUM];
-+					/**< Buffer Manager pool Information-*/
-+	uint32_t fmbm_acnt[FMAN_PORT_MAX_EXT_POOLS_NUM];
-+					/**< Allocate Counter-*/
-+	uint32_t reserved0130[8];
-+					/**< 0x130/0x140 - 0x15F reserved -*/
-+	uint32_t fmbm_rcgm[FMAN_PORT_CG_MAP_NUM];
-+					/**< Congestion Group Map*/
-+	uint32_t fmbm_mpd;		/**< BM Pool Depletion  */
-+	uint32_t reserved0184[0x1F];	/**< (0x184 0x1FF) */
-+	uint32_t fmbm_rstc;		/**< Rx Statistics Counters*/
-+	uint32_t fmbm_rfrc;		/**< Rx Frame Counter*/
-+	uint32_t fmbm_rfbc;		/**< Rx Bad Frames Counter*/
-+	uint32_t fmbm_rlfc;		/**< Rx Large Frames Counter*/
-+	uint32_t fmbm_rffc;		/**< Rx Filter Frames Counter*/
-+	uint32_t fmbm_rfdc;		/**< Rx Frame Discard Counter*/
-+	uint32_t fmbm_rfldec;		/**< Rx Frames List DMA Error Counter*/
-+	uint32_t fmbm_rodc;		/**< Rx Out of Buffers Discard nntr*/
-+	uint32_t fmbm_rbdc;		/**< Rx Buffers Deallocate Counter*/
-+	uint32_t reserved0224[0x17];	/**< (0x224 0x27F) */
-+	uint32_t fmbm_rpc;		/**< Rx Performance Counters*/
-+	uint32_t fmbm_rpcp;		/**< Rx Performance Count Parameters*/
-+	uint32_t fmbm_rccn;		/**< Rx Cycle Counter*/
-+	uint32_t fmbm_rtuc;		/**< Rx Tasks Utilization Counter*/
-+	uint32_t fmbm_rrquc;		/**< Rx Receive Queue Utilization cntr*/
-+	uint32_t fmbm_rduc;		/**< Rx DMA Utilization Counter*/
-+	uint32_t fmbm_rfuc;		/**< Rx FIFO Utilization Counter*/
-+	uint32_t fmbm_rpac;		/**< Rx Pause Activation Counter*/
-+	uint32_t reserved02a0[0x18];	/**< (0x2A0 0x2FF) */
-+	uint32_t fmbm_rdbg;		/**< Rx Debug-*/
-+};
-+
-+/** @Description   BMI Tx port register map */
-+struct fman_port_tx_bmi_regs {
-+	uint32_t fmbm_tcfg;		/**< Tx Configuration */
-+	uint32_t fmbm_tst;		/**< Tx Status */
-+	uint32_t fmbm_tda;		/**< Tx DMA attributes */
-+	uint32_t fmbm_tfp;		/**< Tx FIFO Parameters */
-+	uint32_t fmbm_tfed;		/**< Tx Frame End Data */
-+	uint32_t fmbm_ticp;		/**< Tx Internal Context Parameters */
-+	uint32_t fmbm_tfdne;		/**< Tx Frame Dequeue Next Engine. */
-+	uint32_t fmbm_tfca;		/**< Tx Frame Command attribute. */
-+	uint32_t fmbm_tcfqid;		/**< Tx Confirmation Frame Queue ID. */
-+	uint32_t fmbm_tefqid;		/**< Tx Frame Error Queue ID */
-+	uint32_t fmbm_tfene;		/**< Tx Frame Enqueue Next Engine */
-+	uint32_t fmbm_trlmts;		/**< Tx Rate Limiter Scale */
-+	uint32_t fmbm_trlmt;		/**< Tx Rate Limiter */
-+	uint32_t reserved0034[0x0e];	/**< (0x034-0x6c) */
-+	uint32_t fmbm_tccb;		/**< Tx Coarse Classification base */
-+	uint32_t fmbm_tfne;		/**< Tx Frame Next Engine */
-+	uint32_t fmbm_tpfcm[0x02];	/**< Tx Priority based Flow Control (PFC) Mapping */
-+	uint32_t fmbm_tcmne;		/**< Tx Frame Continuous Mode Next Engine */
-+	uint32_t reserved0080[0x60];	/**< (0x080-0x200) */
-+	uint32_t fmbm_tstc;		/**< Tx Statistics Counters */
-+	uint32_t fmbm_tfrc;		/**< Tx Frame Counter */
-+	uint32_t fmbm_tfdc;		/**< Tx Frames Discard Counter */
-+	uint32_t fmbm_tfledc;		/**< Tx Frame len error discard cntr */
-+	uint32_t fmbm_tfufdc;		/**< Tx Frame unsprt frmt discard cntr*/
-+	uint32_t fmbm_tbdc;		/**< Tx Buffers Deallocate Counter */
-+	uint32_t reserved0218[0x1A];	/**< (0x218-0x280) */
-+	uint32_t fmbm_tpc;		/**< Tx Performance Counters*/
-+	uint32_t fmbm_tpcp;		/**< Tx Performance Count Parameters*/
-+	uint32_t fmbm_tccn;		/**< Tx Cycle Counter*/
-+	uint32_t fmbm_ttuc;		/**< Tx Tasks Utilization Counter*/
-+	uint32_t fmbm_ttcquc;		/**< Tx Transmit conf Q util Counter*/
-+	uint32_t fmbm_tduc;		/**< Tx DMA Utilization Counter*/
-+	uint32_t fmbm_tfuc;		/**< Tx FIFO Utilization Counter*/
-+};
-+
-+/** @Description   BMI O/H port register map */
-+struct fman_port_oh_bmi_regs {
-+	uint32_t fmbm_ocfg;		/**< O/H Configuration  */
-+	uint32_t fmbm_ost;		/**< O/H Status */
-+	uint32_t fmbm_oda;		/**< O/H DMA attributes  */
-+	uint32_t fmbm_oicp;		/**< O/H Internal Context Parameters */
-+	uint32_t fmbm_ofdne;		/**< O/H Frame Dequeue Next Engine  */
-+	uint32_t fmbm_ofne;		/**< O/H Frame Next Engine  */
-+	uint32_t fmbm_ofca;		/**< O/H Frame Command Attributes.  */
-+	uint32_t fmbm_ofpne;		/**< O/H Frame Parser Next Engine  */
-+	uint32_t fmbm_opso;		/**< O/H Parse Start Offset  */
-+	uint32_t fmbm_opp;		/**< O/H Policer Profile */
-+	uint32_t fmbm_occb;		/**< O/H Coarse Classification base */
-+	uint32_t fmbm_oim;		/**< O/H Internal margins*/
-+	uint32_t fmbm_ofp;		/**< O/H Fifo Parameters*/
-+	uint32_t fmbm_ofed;		/**< O/H Frame End Data*/
-+	uint32_t reserved0030[2];	/**< (0x038 - 0x03F) */
-+	uint32_t fmbm_oprai[FMAN_PORT_PRS_RESULT_WORDS_NUM];
-+				/**< O/H Parse Results Array Initialization  */
-+	uint32_t fmbm_ofqid;		/**< O/H Frame Queue ID  */
-+	uint32_t fmbm_oefqid;		/**< O/H Error Frame Queue ID  */
-+	uint32_t fmbm_ofsdm;		/**< O/H Frame Status Discard Mask  */
-+	uint32_t fmbm_ofsem;		/**< O/H Frame Status Error Mask  */
-+	uint32_t fmbm_ofene;		/**< O/H Frame Enqueue Next Engine  */
-+	uint32_t fmbm_orlmts;		/**< O/H Rate Limiter Scale  */
-+	uint32_t fmbm_orlmt;		/**< O/H Rate Limiter  */
-+	uint32_t fmbm_ocmne;		/**< O/H Continuous Mode Next Engine  */
-+	uint32_t reserved0080[0x20];	/**< 0x080 - 0x0FF Reserved */
-+	uint32_t fmbm_oebmpi[2];	/**< Buf Mngr Observed Pool Info */
-+	uint32_t reserved0108[0x16];	/**< 0x108 - 0x15F Reserved */
-+	uint32_t fmbm_ocgm[FMAN_PORT_CG_MAP_NUM]; /**< Observed Congestion Group Map */
-+	uint32_t fmbm_ompd;		/**< Observed BMan Pool Depletion */
-+	uint32_t reserved0184[0x1F];	/**< 0x184 - 0x1FF Reserved */
-+	uint32_t fmbm_ostc;		/**< O/H Statistics Counters  */
-+	uint32_t fmbm_ofrc;		/**< O/H Frame Counter  */
-+	uint32_t fmbm_ofdc;		/**< O/H Frames Discard Counter  */
-+	uint32_t fmbm_ofledc;		/**< O/H Frames Len Err Discard Cntr */
-+	uint32_t fmbm_ofufdc;		/**< O/H Frames Unsprtd Discard Cutr  */
-+	uint32_t fmbm_offc;		/**< O/H Filter Frames Counter  */
-+	uint32_t fmbm_ofwdc;		/**< Rx Frames WRED Discard Counter  */
-+	uint32_t fmbm_ofldec;		/**< O/H Frames List DMA Error Cntr */
-+	uint32_t fmbm_obdc;		/**< O/H Buffers Deallocate Counter */
-+	uint32_t reserved0218[0x17];	/**< (0x218 - 0x27F) */
-+	uint32_t fmbm_opc;		/**< O/H Performance Counters  */
-+	uint32_t fmbm_opcp;		/**< O/H Performance Count Parameters */
-+	uint32_t fmbm_occn;		/**< O/H Cycle Counter  */
-+	uint32_t fmbm_otuc;		/**< O/H Tasks Utilization Counter  */
-+	uint32_t fmbm_oduc;		/**< O/H DMA Utilization Counter */
-+	uint32_t fmbm_ofuc;		/**< O/H FIFO Utilization Counter */
-+};
-+
-+/** @Description   BMI port register map */
-+union fman_port_bmi_regs {
-+	struct fman_port_rx_bmi_regs rx;
-+	struct fman_port_tx_bmi_regs tx;
-+	struct fman_port_oh_bmi_regs oh;
-+};
-+
-+/** @Description   QMI port register map */
-+struct fman_port_qmi_regs {
-+	uint32_t fmqm_pnc;		/**< PortID n Configuration Register */
-+	uint32_t fmqm_pns;		/**< PortID n Status Register */
-+	uint32_t fmqm_pnts;		/**< PortID n Task Status Register */
-+	uint32_t reserved00c[4];	/**< 0xn00C - 0xn01B */
-+	uint32_t fmqm_pnen;		/**< PortID n Enqueue NIA Register */
-+	uint32_t fmqm_pnetfc;		/**< PortID n Enq Total Frame Counter */
-+	uint32_t reserved024[2];	/**< 0xn024 - 0x02B */
-+	uint32_t fmqm_pndn;		/**< PortID n Dequeue NIA Register */
-+	uint32_t fmqm_pndc;		/**< PortID n Dequeue Config Register */
-+	uint32_t fmqm_pndtfc;		/**< PortID n Dequeue tot Frame cntr */
-+	uint32_t fmqm_pndfdc;		/**< PortID n Dequeue FQID Dflt Cntr */
-+	uint32_t fmqm_pndcc;		/**< PortID n Dequeue Confirm Counter */
-+};
-+
-+
-+enum fman_port_dma_swap {
-+	E_FMAN_PORT_DMA_NO_SWAP,	/**< No swap, transfer data as is */
-+	E_FMAN_PORT_DMA_SWAP_LE,
-+	/**< The transferred data should be swapped in PPC Little Endian mode */
-+	E_FMAN_PORT_DMA_SWAP_BE
-+	/**< The transferred data should be swapped in Big Endian mode */
-+};
-+
-+/* Default port color */
-+enum fman_port_color {
-+	E_FMAN_PORT_COLOR_GREEN,	/**< Default port color is green */
-+	E_FMAN_PORT_COLOR_YELLOW,	/**< Default port color is yellow */
-+	E_FMAN_PORT_COLOR_RED,		/**< Default port color is red */
-+	E_FMAN_PORT_COLOR_OVERRIDE	/**< Ignore color */
-+};
-+
-+/* QMI dequeue from the SP channel - types */
-+enum fman_port_deq_type {
-+	E_FMAN_PORT_DEQ_BY_PRI,
-+	/**< Priority precedence and Intra-Class scheduling */
-+	E_FMAN_PORT_DEQ_ACTIVE_FQ,
-+	/**< Active FQ precedence and Intra-Class scheduling */
-+	E_FMAN_PORT_DEQ_ACTIVE_FQ_NO_ICS
-+	/**< Active FQ precedence and override Intra-Class scheduling */
-+};
-+
-+/* QMI dequeue prefetch modes */
-+enum fman_port_deq_prefetch {
-+	E_FMAN_PORT_DEQ_NO_PREFETCH, /**< No prefetch mode */
-+	E_FMAN_PORT_DEQ_PART_PREFETCH, /**< Partial prefetch mode */
-+	E_FMAN_PORT_DEQ_FULL_PREFETCH /**< Full prefetch mode */
-+};
-+
-+/* Parameters for defining performance counters behavior */
-+struct fman_port_perf_cnt_params {
-+	uint8_t task_val;	/**< Task compare value */
-+	uint8_t queue_val;
-+	/**< Rx or Tx conf queue compare value (unused for O/H ports) */
-+	uint8_t dma_val;	/**< Dma compare value */
-+	uint32_t fifo_val;	/**< Fifo compare value (in bytes) */
-+};
-+
-+/** @Description   FM Port configuration structure, used at init */
-+struct fman_port_cfg {
-+	struct fman_port_perf_cnt_params perf_cnt_params;
-+	/* BMI parameters */
-+	enum fman_port_dma_swap		dma_swap_data;
-+	bool				dma_ic_stash_on;
-+	bool				dma_header_stash_on;
-+	bool				dma_sg_stash_on;
-+	bool				dma_write_optimize;
-+	uint16_t			ic_ext_offset;
-+	uint8_t				ic_int_offset;
-+	uint16_t			ic_size;
-+	enum fman_port_color		color;
-+	bool				sync_req;
-+	bool				discard_override;
-+	uint8_t				checksum_bytes_ignore;
-+	uint8_t				rx_cut_end_bytes;
-+	uint32_t			rx_pri_elevation;
-+	uint32_t			rx_fifo_thr;
-+	uint8_t				rx_fd_bits;
-+	uint8_t				int_buf_start_margin;
-+	uint16_t			ext_buf_start_margin;
-+	uint16_t			ext_buf_end_margin;
-+	uint32_t			tx_fifo_min_level;
-+	uint32_t			tx_fifo_low_comf_level;
-+	uint8_t				tx_fifo_deq_pipeline_depth;
-+	bool				stats_counters_enable;
-+	bool				perf_counters_enable;
-+	/* QMI parameters */
-+	bool				deq_high_pri;
-+	enum fman_port_deq_type		deq_type;
-+	enum fman_port_deq_prefetch	deq_prefetch_opt;
-+	uint16_t			deq_byte_cnt;
-+	bool				queue_counters_enable;
-+	bool				no_scatter_gather;
-+	int				errata_A006675;
-+	int				errata_A006320;
-+	int				excessive_threshold_register;
-+	int				fmbm_rebm_has_sgd;
-+	int				fmbm_tfne_has_features;
-+	int				qmi_deq_options_support;
-+};
-+
-+enum fman_port_type {
-+	E_FMAN_PORT_TYPE_OP = 0,
-+	/**< Offline parsing port, shares id-s with
-+	 * host command, so must have exclusive id-s */
-+	E_FMAN_PORT_TYPE_RX,        /**< 1G Rx port */
-+	E_FMAN_PORT_TYPE_RX_10G,    /**< 10G Rx port */
-+	E_FMAN_PORT_TYPE_TX,        /**< 1G Tx port */
-+	E_FMAN_PORT_TYPE_TX_10G,     /**< 10G Tx port */
-+	E_FMAN_PORT_TYPE_DUMMY,
-+	E_FMAN_PORT_TYPE_HC = E_FMAN_PORT_TYPE_DUMMY
-+	/**< Host command port, shares id-s with
-+	 * offline parsing ports, so must have exclusive id-s */
-+};
-+
-+struct fman_port_params {
-+	uint32_t discard_mask;
-+	uint32_t err_mask;
-+	uint32_t dflt_fqid;
-+	uint32_t err_fqid;
-+	uint8_t deq_sp;
-+	bool dont_release_buf;
-+};
-+
-+/* Port context - used by most API functions */
-+struct fman_port {
-+	enum fman_port_type type;
-+	uint8_t fm_rev_maj;
-+	uint8_t fm_rev_min;
-+	union fman_port_bmi_regs *bmi_regs;
-+	struct fman_port_qmi_regs *qmi_regs;
-+	bool im_en;
-+	uint8_t ext_pools_num;
-+};
-+
-+/** @Description   External buffer pools configuration */
-+struct fman_port_bpools {
-+	uint8_t	count;			/**< Num of pools to set up */
-+	bool	counters_enable;	/**< Enable allocate counters */
-+	uint8_t grp_bp_depleted_num;
-+	/**< Number of depleted pools - if reached the BMI indicates
-+	 * the MAC to send a pause frame */
-+	struct {
-+		uint8_t		bpid;	/**< BM pool ID */
-+		uint16_t	size;
-+		/**< Pool's size - must be in ascending order */
-+		bool		is_backup;
-+		/**< If this is a backup pool */
-+		bool		grp_bp_depleted;
-+		/**< Consider this buffer in multiple pools depletion criteria*/
-+		bool		single_bp_depleted;
-+		/**< Consider this buffer in single pool depletion criteria */
-+		bool		pfc_priorities_en;
-+	} bpool[FMAN_PORT_MAX_EXT_POOLS_NUM];
-+};
-+
-+enum fman_port_rate_limiter_scale_down {
-+	E_FMAN_PORT_RATE_DOWN_NONE,
-+	E_FMAN_PORT_RATE_DOWN_BY_2,
-+	E_FMAN_PORT_RATE_DOWN_BY_4,
-+	E_FMAN_PORT_RATE_DOWN_BY_8
-+};
-+
-+/* Rate limiter configuration */
-+struct fman_port_rate_limiter {
-+	uint8_t		count_1micro_bit;
-+	bool		high_burst_size_gran;
-+	/**< Defines burst_size granularity for OP ports; when TRUE,
-+	 * burst_size below counts in frames, otherwise in 10^3 frames */
-+	uint16_t	burst_size;
-+	/**< Max burst size, in KBytes for Tx port, according to
-+	 * high_burst_size_gran definition for OP port */
-+	uint32_t	rate;
-+	/**< In Kbps for Tx port, in frames/sec for OP port */
-+	enum fman_port_rate_limiter_scale_down rate_factor;
-+};
-+
-+/* BMI statistics counters */
-+enum fman_port_stats_counters {
-+	E_FMAN_PORT_STATS_CNT_FRAME,
-+	/**< Number of processed frames; valid for all ports */
-+	E_FMAN_PORT_STATS_CNT_DISCARD,
-+	/**< For Rx ports - frames discarded by QMAN, for Tx or O/H ports -
-+	 * frames discarded due to DMA error; valid for all ports */
-+	E_FMAN_PORT_STATS_CNT_DEALLOC_BUF,
-+	/**< Number of buffer deallocate operations; valid for all ports */
-+	E_FMAN_PORT_STATS_CNT_RX_BAD_FRAME,
-+	/**< Number of bad Rx frames, like CRC error, Rx FIFO overflow etc;
-+	 * valid for Rx ports only */
-+	E_FMAN_PORT_STATS_CNT_RX_LARGE_FRAME,
-+	/**< Number of Rx oversized frames, that is frames exceeding max frame
-+	 * size configured for the corresponding ETH controller;
-+	 * valid for Rx ports only */
-+	E_FMAN_PORT_STATS_CNT_RX_OUT_OF_BUF,
-+	/**< Frames discarded due to lack of external buffers; valid for
-+	 * Rx ports only */
-+	E_FMAN_PORT_STATS_CNT_LEN_ERR,
-+	/**< Frames discarded due to frame length error; valid for Tx and
-+	 * O/H ports only */
-+	E_FMAN_PORT_STATS_CNT_UNSUPPORTED_FORMAT,
-+	/**< Frames discarded due to unsupported FD format; valid for Tx
-+	 * and O/H ports only */
-+	E_FMAN_PORT_STATS_CNT_FILTERED_FRAME,
-+	/**< Number of frames filtered out by PCD module; valid for
-+	 * Rx and OP ports only */
-+	E_FMAN_PORT_STATS_CNT_DMA_ERR,
-+	/**< Frames rejected by QMAN that were not able to release their
-+	 * buffers due to DMA error; valid for Rx and O/H ports only */
-+	E_FMAN_PORT_STATS_CNT_WRED_DISCARD
-+	/**< Frames going through O/H port that were not able to to enter the
-+	 * return queue due to WRED algorithm; valid for O/H ports only */
-+};
-+
-+/* BMI performance counters */
-+enum fman_port_perf_counters {
-+	E_FMAN_PORT_PERF_CNT_CYCLE,	/**< Cycle counter */
-+	E_FMAN_PORT_PERF_CNT_TASK_UTIL,	/**< Tasks utilization counter */
-+	E_FMAN_PORT_PERF_CNT_QUEUE_UTIL,
-+	/**< For Rx ports - Rx queue utilization, for Tx ports - Tx conf queue
-+	 * utilization; not valid for O/H ports */
-+	E_FMAN_PORT_PERF_CNT_DMA_UTIL,	/**< DMA utilization counter */
-+	E_FMAN_PORT_PERF_CNT_FIFO_UTIL,	/**< FIFO utilization counter */
-+	E_FMAN_PORT_PERF_CNT_RX_PAUSE
-+	/**< Number of cycles in which Rx pause activation control is on;
-+	 * valid for Rx ports only */
-+};
-+
-+/* QMI counters */
-+enum fman_port_qmi_counters {
-+	E_FMAN_PORT_ENQ_TOTAL,	/**< EnQ tot frame cntr */
-+	E_FMAN_PORT_DEQ_TOTAL,	/**< DeQ tot frame cntr; invalid for Rx ports */
-+	E_FMAN_PORT_DEQ_FROM_DFLT,
-+	/**< Dequeue from default FQID counter not valid for Rx ports */
-+	E_FMAN_PORT_DEQ_CONFIRM	/**< DeQ confirm cntr invalid for Rx ports */
-+};
-+
-+
-+/** @Collection    FM Port API */
-+void fman_port_defconfig(struct fman_port_cfg *cfg, enum fman_port_type type);
-+int fman_port_init(struct fman_port *port,
-+		struct fman_port_cfg *cfg,
-+		struct fman_port_params *params);
-+int fman_port_enable(struct fman_port *port);
-+int fman_port_disable(const struct fman_port *port);
-+int fman_port_set_bpools(const struct fman_port *port,
-+		const struct fman_port_bpools *bp);
-+int fman_port_set_rate_limiter(struct fman_port *port,
-+		struct fman_port_rate_limiter *rate_limiter);
-+int fman_port_delete_rate_limiter(struct fman_port *port);
-+int fman_port_set_err_mask(struct fman_port *port, uint32_t err_mask);
-+int fman_port_set_discard_mask(struct fman_port *port, uint32_t discard_mask);
-+int fman_port_modify_rx_fd_bits(struct fman_port *port,
-+		uint8_t rx_fd_bits,
-+		bool add);
-+int fman_port_set_perf_cnt_params(struct fman_port *port,
-+		struct fman_port_perf_cnt_params *params);
-+int fman_port_set_stats_cnt_mode(struct fman_port *port, bool enable);
-+int fman_port_set_perf_cnt_mode(struct fman_port *port, bool enable);
-+int fman_port_set_queue_cnt_mode(struct fman_port *port, bool enable);
-+int fman_port_set_bpool_cnt_mode(struct fman_port *port,
-+		uint8_t bpid,
-+		bool enable);
-+uint32_t fman_port_get_stats_counter(struct fman_port *port,
-+		enum fman_port_stats_counters counter);
-+void fman_port_set_stats_counter(struct fman_port *port,
-+		enum fman_port_stats_counters counter,
-+		uint32_t value);
-+uint32_t fman_port_get_perf_counter(struct fman_port *port,
-+		enum fman_port_perf_counters counter);
-+void fman_port_set_perf_counter(struct fman_port *port,
-+		enum fman_port_perf_counters counter,
-+		uint32_t value);
-+uint32_t fman_port_get_qmi_counter(struct fman_port *port,
-+		enum fman_port_qmi_counters counter);
-+void fman_port_set_qmi_counter(struct fman_port *port,
-+		enum fman_port_qmi_counters counter,
-+		uint32_t value);
-+uint32_t fman_port_get_bpool_counter(struct fman_port *port, uint8_t bpid);
-+void fman_port_set_bpool_counter(struct fman_port *port,
-+		uint8_t bpid,
-+		uint32_t value);
-+int fman_port_add_congestion_grps(struct fman_port *port,
-+		uint32_t grps_map[FMAN_PORT_CG_MAP_NUM]);
-+int fman_port_remove_congestion_grps(struct fman_port  *port,
-+		uint32_t grps_map[FMAN_PORT_CG_MAP_NUM]);
-+
-+
-+#endif /* __FSL_FMAN_PORT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_prs.h
-@@ -0,0 +1,102 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __FSL_FMAN_PRS_H
-+#define __FSL_FMAN_PRS_H
-+
-+#include "common/general.h"
-+
-+#define FM_PCD_EX_PRS_DOUBLE_ECC	0x02000000
-+#define FM_PCD_EX_PRS_SINGLE_ECC	0x01000000
-+
-+#define FM_PCD_PRS_PPSC_ALL_PORTS	0xffff0000
-+#define FM_PCD_PRS_RPIMAC_EN		0x00000001
-+#define FM_PCD_PRS_PORT_IDLE_STS	0xffff0000
-+#define FM_PCD_PRS_SINGLE_ECC		0x00004000
-+#define FM_PCD_PRS_DOUBLE_ECC		0x00004000
-+#define PRS_MAX_CYCLE_LIMIT		8191
-+
-+#define DEFAULT_MAX_PRS_CYC_LIM		0
-+
-+struct fman_prs_regs {
-+	uint32_t fmpr_rpclim;
-+	uint32_t fmpr_rpimac;
-+	uint32_t pmeec;
-+	uint32_t res00c[5];
-+	uint32_t fmpr_pevr;
-+	uint32_t fmpr_pever;
-+	uint32_t res028;
-+	uint32_t fmpr_perr;
-+	uint32_t fmpr_perer;
-+	uint32_t res034;
-+	uint32_t res038[10];
-+	uint32_t fmpr_ppsc;
-+	uint32_t res064;
-+	uint32_t fmpr_pds;
-+	uint32_t fmpr_l2rrs;
-+	uint32_t fmpr_l3rrs;
-+	uint32_t fmpr_l4rrs;
-+	uint32_t fmpr_srrs;
-+	uint32_t fmpr_l2rres;
-+	uint32_t fmpr_l3rres;
-+	uint32_t fmpr_l4rres;
-+	uint32_t fmpr_srres;
-+	uint32_t fmpr_spcs;
-+	uint32_t fmpr_spscs;
-+	uint32_t fmpr_hxscs;
-+	uint32_t fmpr_mrcs;
-+	uint32_t fmpr_mwcs;
-+	uint32_t fmpr_mrscs;
-+	uint32_t fmpr_mwscs;
-+	uint32_t fmpr_fcscs;
-+};
-+
-+struct fman_prs_cfg {
-+	uint32_t	port_id_stat;
-+	uint16_t	max_prs_cyc_lim;
-+	uint32_t	prs_exceptions;
-+};
-+
-+uint32_t fman_prs_get_err_event(struct fman_prs_regs *regs, uint32_t ev_mask);
-+uint32_t fman_prs_get_err_ev_mask(struct fman_prs_regs *regs);
-+void fman_prs_ack_err_event(struct fman_prs_regs *regs, uint32_t event);
-+uint32_t fman_prs_get_expt_event(struct fman_prs_regs *regs, uint32_t ev_mask);
-+uint32_t fman_prs_get_expt_ev_mask(struct fman_prs_regs *regs);
-+void fman_prs_ack_expt_event(struct fman_prs_regs *regs, uint32_t event);
-+void fman_prs_defconfig(struct fman_prs_cfg *cfg);
-+int fman_prs_init(struct fman_prs_regs *regs, struct fman_prs_cfg *cfg);
-+void fman_prs_enable(struct fman_prs_regs *regs);
-+void fman_prs_disable(struct fman_prs_regs *regs);
-+int fman_prs_is_enabled(struct fman_prs_regs *regs);
-+void fman_prs_set_stst_port_msk(struct fman_prs_regs *regs, uint32_t pid_msk);
-+void fman_prs_set_stst(struct fman_prs_regs *regs, bool enable);
-+#endif /* __FSL_FMAN_PRS_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_rtc.h
-@@ -0,0 +1,449 @@
-+/*
-+ * Copyright 2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __FSL_FMAN_RTC_H
-+#define __FSL_FMAN_RTC_H
-+
-+#include "common/general.h"
-+
-+/* FM RTC Registers definitions */
-+#define FMAN_RTC_TMR_CTRL_ALMP1                  0x80000000
-+#define FMAN_RTC_TMR_CTRL_ALMP2                  0x40000000
-+#define FMAN_RTC_TMR_CTRL_FS                     0x10000000
-+#define FMAN_RTC_TMR_CTRL_PP1L                   0x08000000
-+#define FMAN_RTC_TMR_CTRL_PP2L                   0x04000000
-+#define FMAN_RTC_TMR_CTRL_TCLK_PERIOD_MASK       0x03FF0000
-+#define FMAN_RTC_TMR_CTRL_FRD                    0x00004000
-+#define FMAN_RTC_TMR_CTRL_SLV                    0x00002000
-+#define FMAN_RTC_TMR_CTRL_ETEP1                  0x00000100
-+#define FMAN_RTC_TMR_CTRL_COPH                   0x00000080
-+#define FMAN_RTC_TMR_CTRL_CIPH                   0x00000040
-+#define FMAN_RTC_TMR_CTRL_TMSR                   0x00000020
-+#define FMAN_RTC_TMR_CTRL_DBG                    0x00000010
-+#define FMAN_RTC_TMR_CTRL_BYP                    0x00000008
-+#define FMAN_RTC_TMR_CTRL_TE                     0x00000004
-+#define FMAN_RTC_TMR_CTRL_CKSEL_OSC_CLK          0x00000003
-+#define FMAN_RTC_TMR_CTRL_CKSEL_MAC_CLK          0x00000001
-+#define FMAN_RTC_TMR_CTRL_CKSEL_EXT_CLK          0x00000000
-+#define FMAN_RTC_TMR_CTRL_TCLK_PERIOD_SHIFT      16
-+
-+#define FMAN_RTC_TMR_TEVENT_ETS2                 0x02000000
-+#define FMAN_RTC_TMR_TEVENT_ETS1                 0x01000000
-+#define FMAN_RTC_TMR_TEVENT_ALM2                 0x00020000
-+#define FMAN_RTC_TMR_TEVENT_ALM1                 0x00010000
-+#define FMAN_RTC_TMR_TEVENT_PP1                  0x00000080
-+#define FMAN_RTC_TMR_TEVENT_PP2                  0x00000040
-+#define FMAN_RTC_TMR_TEVENT_PP3                  0x00000020
-+#define FMAN_RTC_TMR_TEVENT_ALL                  (FMAN_RTC_TMR_TEVENT_ETS2 |\
-+						FMAN_RTC_TMR_TEVENT_ETS1 |\
-+						FMAN_RTC_TMR_TEVENT_ALM2 |\
-+						FMAN_RTC_TMR_TEVENT_ALM1 |\
-+						FMAN_RTC_TMR_TEVENT_PP1 |\
-+						FMAN_RTC_TMR_TEVENT_PP2 |\
-+						FMAN_RTC_TMR_TEVENT_PP3)
-+
-+#define FMAN_RTC_TMR_PRSC_OCK_MASK               0x0000FFFF
-+
-+/**************************************************************************//**
-+ @Description   FM RTC Alarm Polarity Options.
-+*//***************************************************************************/
-+enum fman_rtc_alarm_polarity {
-+    E_FMAN_RTC_ALARM_POLARITY_ACTIVE_HIGH,  /**< Active-high output polarity */
-+    E_FMAN_RTC_ALARM_POLARITY_ACTIVE_LOW    /**< Active-low output polarity */
-+};
-+
-+/**************************************************************************//**
-+ @Description   FM RTC Trigger Polarity Options.
-+*//***************************************************************************/
-+enum fman_rtc_trigger_polarity {
-+    E_FMAN_RTC_TRIGGER_ON_RISING_EDGE,    /**< Trigger on rising edge */
-+    E_FMAN_RTC_TRIGGER_ON_FALLING_EDGE    /**< Trigger on falling edge */
-+};
-+
-+/**************************************************************************//**
-+ @Description   IEEE1588 Timer Module FM RTC Optional Clock Sources.
-+*//***************************************************************************/
-+enum fman_src_clock {
-+    E_FMAN_RTC_SOURCE_CLOCK_EXTERNAL,  /**< external high precision timer
-+						reference clock */
-+    E_FMAN_RTC_SOURCE_CLOCK_SYSTEM,    /**< MAC system clock */
-+    E_FMAN_RTC_SOURCE_CLOCK_OSCILATOR  /**< RTC clock oscilator */
-+};
-+
-+/* RTC default values */
-+#define DEFAULT_SRC_CLOCK                E_FMAN_RTC_SOURCE_CLOCK_SYSTEM
-+#define DEFAULT_INVERT_INPUT_CLK_PHASE   FALSE
-+#define DEFAULT_INVERT_OUTPUT_CLK_PHASE  FALSE
-+#define DEFAULT_ALARM_POLARITY           E_FMAN_RTC_ALARM_POLARITY_ACTIVE_HIGH
-+#define DEFAULT_TRIGGER_POLARITY         E_FMAN_RTC_TRIGGER_ON_FALLING_EDGE
-+#define DEFAULT_PULSE_REALIGN            FALSE
-+
-+#define FMAN_RTC_MAX_NUM_OF_ALARMS 3
-+#define FMAN_RTC_MAX_NUM_OF_PERIODIC_PULSES 4
-+#define FMAN_RTC_MAX_NUM_OF_EXT_TRIGGERS 3
-+
-+/**************************************************************************//**
-+ @Description FM RTC timer alarm
-+*//***************************************************************************/
-+struct t_tmr_alarm{
-+    uint32_t   tmr_alarm_h;    /**<  */
-+    uint32_t   tmr_alarm_l;    /**<  */
-+};
-+
-+/**************************************************************************//**
-+ @Description FM RTC timer Ex trigger
-+*//***************************************************************************/
-+struct t_tmr_ext_trigger{
-+    uint32_t   tmr_etts_h;     /**<  */
-+    uint32_t   tmr_etts_l;     /**<  */
-+};
-+
-+struct rtc_regs {
-+    uint32_t tmr_id;      /* 0x000 Module ID register */
-+    uint32_t tmr_id2;     /* 0x004 Controller ID register */
-+    uint32_t reserved0008[30];
-+    uint32_t tmr_ctrl;    /* 0x0080 timer control register */
-+    uint32_t tmr_tevent;  /* 0x0084 timer event register */
-+    uint32_t tmr_temask;  /* 0x0088 timer event mask register */
-+    uint32_t reserved008c[3];
-+    uint32_t tmr_cnt_h;   /* 0x0098 timer counter high register */
-+    uint32_t tmr_cnt_l;   /* 0x009c timer counter low register */
-+    uint32_t tmr_add;     /* 0x00a0 timer drift compensation addend register */
-+    uint32_t tmr_acc;     /* 0x00a4 timer accumulator register */
-+    uint32_t tmr_prsc;    /* 0x00a8 timer prescale */
-+    uint32_t reserved00ac;
-+    uint32_t tmr_off_h;    /* 0x00b0 timer offset high */
-+    uint32_t tmr_off_l;    /* 0x00b4 timer offset low  */
-+    struct t_tmr_alarm tmr_alarm[FMAN_RTC_MAX_NUM_OF_ALARMS]; /* 0x00b8 timer
-+								alarm */
-+    uint32_t tmr_fiper[FMAN_RTC_MAX_NUM_OF_PERIODIC_PULSES]; /* 0x00d0 timer
-+						fixed period interval */
-+    struct t_tmr_ext_trigger tmr_etts[FMAN_RTC_MAX_NUM_OF_EXT_TRIGGERS];
-+			/* 0x00e0 time stamp general purpose external */
-+    uint32_t reserved00f0[4];
-+};
-+
-+struct rtc_cfg {
-+    enum fman_src_clock            src_clk;
-+    uint32_t                ext_src_clk_freq;
-+    uint32_t                rtc_freq_hz;
-+    bool                    timer_slave_mode;
-+    bool                    invert_input_clk_phase;
-+    bool                    invert_output_clk_phase;
-+    uint32_t                events_mask;
-+    bool                    bypass; /**< Indicates if frequency compensation
-+					is bypassed */
-+    bool                    pulse_realign;
-+    enum fman_rtc_alarm_polarity    alarm_polarity[FMAN_RTC_MAX_NUM_OF_ALARMS];
-+    enum fman_rtc_trigger_polarity  trigger_polarity
-+					[FMAN_RTC_MAX_NUM_OF_EXT_TRIGGERS];
-+};
-+
-+/**
-+ * fman_rtc_defconfig() - Get default RTC configuration
-+ * @cfg:	pointer to configuration structure.
-+ *
-+ * Call this function to obtain a default set of configuration values for
-+ * initializing RTC.  The user can overwrite any of the values before calling
-+ * fman_rtc_init(), if specific configuration needs to be applied.
-+ */
-+void fman_rtc_defconfig(struct rtc_cfg *cfg);
-+
-+/**
-+ * fman_rtc_get_events() - Get the events
-+ * @regs:		Pointer to RTC register block
-+ *
-+ * Returns: The events
-+ */
-+uint32_t fman_rtc_get_events(struct rtc_regs *regs);
-+
-+/**
-+ * fman_rtc_get_interrupt_mask() - Get the events mask
-+ * @regs:		Pointer to RTC register block
-+ *
-+ * Returns: The events mask
-+ */
-+uint32_t fman_rtc_get_interrupt_mask(struct rtc_regs *regs);
-+
-+
-+/**
-+ * fman_rtc_set_interrupt_mask() - Set the events mask
-+ * @regs:		Pointer to RTC register block
-+ * @mask:		The mask to set
-+ */
-+void fman_rtc_set_interrupt_mask(struct rtc_regs *regs, uint32_t mask);
-+
-+/**
-+ * fman_rtc_get_event() - Check if specific events occurred
-+ * @regs:		Pointer to RTC register block
-+ * @ev_mask:	a mask of the events to check
-+ *
-+ * Returns: 0 if the events did not occur. Non zero if one of the events occurred
-+ */
-+uint32_t fman_rtc_get_event(struct rtc_regs *regs, uint32_t ev_mask);
-+
-+/**
-+ * fman_rtc_check_and_clear_event() - Clear events which are on
-+ * @regs:		Pointer to RTC register block
-+ *
-+ * Returns: A mask of the events which were cleared
-+ */
-+uint32_t fman_rtc_check_and_clear_event(struct rtc_regs *regs);
-+
-+/**
-+ * fman_rtc_ack_event() - Clear events
-+ * @regs:		Pointer to RTC register block
-+ * @events:		The events to disable
-+ */
-+void fman_rtc_ack_event(struct rtc_regs *regs, uint32_t events);
-+
-+/**
-+ * fman_rtc_enable_interupt() - Enable events interrupts
-+ * @regs:		Pointer to RTC register block
-+ * @mask:		The events to disable
-+ */
-+void fman_rtc_enable_interupt(struct rtc_regs *regs, uint32_t mask);
-+
-+/**
-+ * fman_rtc_disable_interupt() - Disable events interrupts
-+ * @regs:		Pointer to RTC register block
-+ * @mask:		The events to disable
-+ */
-+void fman_rtc_disable_interupt(struct rtc_regs *regs, uint32_t mask);
-+
-+/**
-+ * fman_rtc_get_timer_ctrl() - Get the control register
-+ * @regs:		Pointer to RTC register block
-+ *
-+ * Returns: The control register value
-+ */
-+uint32_t fman_rtc_get_timer_ctrl(struct rtc_regs *regs);
-+
-+/**
-+ * fman_rtc_set_timer_ctrl() - Set timer control register
-+ * @regs:		Pointer to RTC register block
-+ * @val:		The value to set
-+ */
-+void fman_rtc_set_timer_ctrl(struct rtc_regs *regs, uint32_t val);
-+
-+/**
-+ * fman_rtc_get_frequency_compensation() - Get the frequency compensation
-+ * @regs:		Pointer to RTC register block
-+ *
-+ * Returns: The timer counter
-+ */
-+uint32_t fman_rtc_get_frequency_compensation(struct rtc_regs *regs);
-+
-+/**
-+ * fman_rtc_set_frequency_compensation() - Set frequency compensation
-+ * @regs:		Pointer to RTC register block
-+ * @val:		The value to set
-+ */
-+void fman_rtc_set_frequency_compensation(struct rtc_regs *regs, uint32_t val);
-+
-+/**
-+ * fman_rtc_get_trigger_stamp() - Get a trigger stamp
-+ * @regs:		Pointer to RTC register block
-+ * @id:	The id of the trigger stamp
-+ *
-+ * Returns: The time stamp
-+ */
-+uint64_t fman_rtc_get_trigger_stamp(struct rtc_regs *regs,  int id);
-+
-+/**
-+ * fman_rtc_set_timer_alarm_l() - Set timer alarm low register
-+ * @regs:		Pointer to RTC register block
-+ * @index:		The index of alarm to set
-+ * @val:		The value to set
-+ */
-+void fman_rtc_set_timer_alarm_l(struct rtc_regs *regs, int index,
-+		uint32_t val);
-+
-+/**
-+ * fman_rtc_set_timer_alarm() - Set timer alarm
-+ * @regs:		Pointer to RTC register block
-+ * @index:		The index of alarm to set
-+ * @val:		The value to set
-+ */
-+void fman_rtc_set_timer_alarm(struct rtc_regs *regs, int index, int64_t val);
-+
-+/**
-+ * fman_rtc_set_timer_fiper() - Set timer fiper
-+ * @regs:		Pointer to RTC register block
-+ * @index:		The index of fiper to set
-+ * @val:		The value to set
-+ */
-+void fman_rtc_set_timer_fiper(struct rtc_regs *regs, int index, uint32_t val);
-+
-+/**
-+ * fman_rtc_set_timer_offset() - Set timer offset
-+ * @regs:		Pointer to RTC register block
-+ * @val:		The value to set
-+ */
-+void fman_rtc_set_timer_offset(struct rtc_regs *regs, int64_t val);
-+
-+/**
-+ * fman_rtc_get_timer() - Get the timer counter
-+ * @regs:		Pointer to RTC register block
-+ *
-+ * Returns: The timer counter
-+ */
-+static inline uint64_t fman_rtc_get_timer(struct rtc_regs *regs)
-+{
-+	uint64_t time;
-+    /* TMR_CNT_L must be read first to get an accurate value */
-+    time = (uint64_t)ioread32be(&regs->tmr_cnt_l);
-+    time |= ((uint64_t)ioread32be(&regs->tmr_cnt_h) << 32);
-+
-+    return time;
-+}
-+
-+/**
-+ * fman_rtc_set_timer() - Set timer counter
-+ * @regs:		Pointer to RTC register block
-+ * @val:		The value to set
-+ */
-+static inline void fman_rtc_set_timer(struct rtc_regs *regs, int64_t val)
-+{
-+	iowrite32be((uint32_t)val, &regs->tmr_cnt_l);
-+	iowrite32be((uint32_t)(val >> 32), &regs->tmr_cnt_h);
-+}
-+
-+/**
-+ * fman_rtc_timers_soft_reset() - Soft reset
-+ * @regs:		Pointer to RTC register block
-+ *
-+ * Resets all the timer registers and state machines for the 1588 IP and
-+ * the attached client 1588
-+ */
-+void fman_rtc_timers_soft_reset(struct rtc_regs *regs);
-+
-+/**
-+ * fman_rtc_clear_external_trigger() - Clear an external trigger
-+ * @regs:		Pointer to RTC register block
-+ * @id: The id of the trigger to clear
-+ */
-+void fman_rtc_clear_external_trigger(struct rtc_regs *regs, int id);
-+
-+/**
-+ * fman_rtc_clear_periodic_pulse() - Clear periodic pulse
-+ * @regs:		Pointer to RTC register block
-+ * @id: The id of the fiper to clear
-+ */
-+void fman_rtc_clear_periodic_pulse(struct rtc_regs *regs, int id);
-+
-+/**
-+ * fman_rtc_enable() - Enable RTC hardware block
-+ * @regs:		Pointer to RTC register block
-+ */
-+void fman_rtc_enable(struct rtc_regs *regs, bool reset_clock);
-+
-+/**
-+ * fman_rtc_is_enabled() - Is RTC hardware block enabled
-+ * @regs:		Pointer to RTC register block
-+ *
-+ * Return: TRUE if enabled
-+ */
-+bool fman_rtc_is_enabled(struct rtc_regs *regs);
-+
-+/**
-+ * fman_rtc_disable() - Disable RTC hardware block
-+ * @regs:		Pointer to RTC register block
-+ */
-+void fman_rtc_disable(struct rtc_regs *regs);
-+
-+/**
-+ * fman_rtc_init() - Init RTC hardware block
-+ * @cfg:		RTC configuration data
-+ * @regs:		Pointer to RTC register block
-+ * @num_alarms:		Number of alarms in RTC
-+ * @num_fipers:		Number of fipers in RTC
-+ * @num_ext_triggers:	Number of external triggers in RTC
-+ * @freq_compensation:		Frequency compensation
-+ * @output_clock_divisor:		Output clock divisor
-+ *
-+ * This function initializes RTC and applies basic configuration.
-+ */
-+void fman_rtc_init(struct rtc_cfg *cfg, struct rtc_regs *regs, int num_alarms,
-+		int num_fipers, int num_ext_triggers, bool init_freq_comp,
-+		uint32_t freq_compensation, uint32_t output_clock_divisor);
-+
-+/**
-+ * fman_rtc_set_alarm() - Set an alarm
-+ * @regs:		Pointer to RTC register block
-+ * @id:			id of alarm
-+ * @val:		value to write
-+ * @enable:		should interrupt be enabled
-+ */
-+void fman_rtc_set_alarm(struct rtc_regs *regs, int id, uint32_t val, bool enable);
-+
-+/**
-+ * fman_rtc_set_periodic_pulse() - Set an alarm
-+ * @regs:		Pointer to RTC register block
-+ * @id:			id of fiper
-+ * @val:		value to write
-+ * @enable:		should interrupt be enabled
-+ */
-+void fman_rtc_set_periodic_pulse(struct rtc_regs *regs, int id, uint32_t val,
-+	bool enable);
-+
-+/**
-+ * fman_rtc_set_ext_trigger() - Set an external trigger
-+ * @regs:		Pointer to RTC register block
-+ * @id:			id of trigger
-+ * @enable:		should interrupt be enabled
-+ * @use_pulse_as_input: use the pulse as input
-+ */
-+void fman_rtc_set_ext_trigger(struct rtc_regs *regs, int id, bool enable,
-+	bool use_pulse_as_input);
-+
-+struct fm_rtc_alarm_params {
-+	uint8_t alarm_id;            	/**< 0 or 1 */
-+	uint64_t alarm_time;         	/**< In nanoseconds, the time when the
-+					alarm should go off - must be a
-+					multiple of the RTC period */
-+	void (*f_alarm_callback)(void* app, uint8_t id); /**< This routine will
-+					be called when RTC reaches alarmTime */
-+	bool clear_on_expiration;   	/**< TRUE to turn off the alarm once
-+					expired.*/
-+};
-+
-+struct fm_rtc_periodic_pulse_params {
-+	uint8_t periodic_pulse_id;      /**< 0 or 1 */
-+	uint64_t periodic_pulse_period; /**< In Nanoseconds. Must be a multiple
-+					of the RTC period */
-+	void (*f_periodic_pulse_callback)(void* app, uint8_t id); /**< This
-+					routine will be called every
-+					periodicPulsePeriod. */
-+};
-+
-+#endif /* __FSL_FMAN_RTC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_sp.h
-@@ -0,0 +1,138 @@
-+/*
-+ * Copyright 2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __FSL_FMAN_SP_H
-+#define __FSL_FMAN_SP_H
-+
-+#include "common/general.h"
-+#include "fsl_fman.h"
-+
-+
-+struct fm_pcd_storage_profile_regs{
-+	uint32_t   fm_sp_ebmpi[8];
-+					/*offset 0 - 0xc*/
-+					/**< Buffer Manager pool Information */
-+
-+	uint32_t   fm_sp_acnt;      /*offset 0x20*/
-+	uint32_t   fm_sp_ebm;       /*offset 0x24*/
-+	uint32_t   fm_sp_da;        /*offset 0x28*/
-+	uint32_t   fm_sp_icp;       /*offset 0x2c*/
-+	uint32_t   fm_sp_mpd;       /*offset 0x30*/
-+	uint32_t   res1[2];         /*offset 0x34 - 0x38*/
-+	uint32_t   fm_sp_spliodn;   /*offset 0x3c*/
-+};
-+
-+/**************************************************************************//**
-+ @Description   structure for defining internal context copying
-+*//***************************************************************************/
-+struct fman_sp_int_context_data_copy{
-+	uint16_t ext_buf_offset;     /**< Offset in External buffer to which
-+					internal context is copied to (Rx)
-+					or taken from (Tx, Op). */
-+	uint8_t int_context_offset; /**< Offset within internal context to copy
-+					from (Rx) or to copy to (Tx, Op).*/
-+	uint16_t size;             /**< Internal offset size to be copied */
-+};
-+
-+/**************************************************************************//**
-+ @Description   struct for defining external buffer margins
-+*//***************************************************************************/
-+struct fman_sp_buf_margins{
-+	uint16_t start_margins;	/**< Number of bytes to be left at the
-+				beginning of the external buffer (must be
-+				divisible by 16) */
-+	uint16_t end_margins;   /**< number of bytes to be left at the end of
-+				 the external buffer(must be divisible by 16)*/
-+};
-+
-+struct fm_storage_profile_params {
-+	struct fman_ext_pools          		fm_ext_pools;
-+	struct fman_backup_bm_pools   		backup_pools;
-+	struct fman_sp_int_context_data_copy 	*int_context;
-+	struct fman_sp_buf_margins            	*buf_margins;
-+	enum fman_dma_swap_option    		dma_swap_data;
-+	enum fman_dma_cache_option          	int_context_cache_attr;
-+	enum fman_dma_cache_option          	header_cache_attr;
-+	enum fman_dma_cache_option          	scatter_gather_cache_attr;
-+	bool                        		dma_write_optimize;
-+	uint16_t                    		liodn_offset;
-+	bool                        		no_scather_gather;
-+	struct fman_buf_pool_depletion        buf_pool_depletion;
-+};
-+
-+/**************************************************************************//**
-+ @Description       Registers bit fields
-+*//***************************************************************************/
-+#define FMAN_SP_EXT_BUF_POOL_EN_COUNTER             0x40000000
-+#define FMAN_SP_EXT_BUF_POOL_VALID                  0x80000000
-+#define FMAN_SP_EXT_BUF_POOL_BACKUP                 0x20000000
-+#define FMAN_SP_DMA_ATTR_WRITE_OPTIMIZE             0x00100000
-+#define FMAN_SP_SG_DISABLE                          0x80000000
-+
-+/* shifts */
-+#define FMAN_SP_EXT_BUF_POOL_ID_SHIFT               16
-+#define FMAN_SP_POOL_DEP_NUM_OF_POOLS_SHIFT         16
-+#define FMAN_SP_EXT_BUF_MARG_START_SHIFT            16
-+#define FMAN_SP_EXT_BUF_MARG_END_SHIFT              0
-+#define FMAN_SP_DMA_ATTR_SWP_SHIFT                  30
-+#define FMAN_SP_DMA_ATTR_IC_CACHE_SHIFT             28
-+#define FMAN_SP_DMA_ATTR_HDR_CACHE_SHIFT            26
-+#define FMAN_SP_DMA_ATTR_SG_CACHE_SHIFT             24
-+#define FMAN_SP_IC_TO_EXT_SHIFT                     16
-+#define FMAN_SP_IC_FROM_INT_SHIFT                   8
-+#define FMAN_SP_IC_SIZE_SHIFT                       0
-+
-+/**************************************************************************//**
-+ @Description       defaults
-+*//***************************************************************************/
-+#define DEFAULT_FMAN_SP_DMA_SWAP_DATA                         FMAN_DMA_NO_SWP
-+#define DEFAULT_FMAN_SP_DMA_INT_CONTEXT_CACHE_ATTR            FMAN_DMA_NO_STASH
-+#define DEFAULT_FMAN_SP_DMA_HEADER_CACHE_ATTR                 FMAN_DMA_NO_STASH
-+#define DEFAULT_FMAN_SP_DMA_SCATTER_GATHER_CACHE_ATTR         FMAN_DMA_NO_STASH
-+#define DEFAULT_FMAN_SP_DMA_WRITE_OPTIMIZE                    TRUE
-+#define DEFAULT_FMAN_SP_NO_SCATTER_GATHER                     FALSE
-+
-+void fman_vsp_defconfig(struct fm_storage_profile_params *cfg);
-+
-+void fman_vsp_init(struct fm_pcd_storage_profile_regs   *regs,
-+	uint16_t index, struct fm_storage_profile_params *fm_vsp_params,
-+	int port_max_num_of_ext_pools, int bm_max_num_of_pools,
-+	int max_num_of_pfc_priorities);
-+
-+uint32_t fman_vsp_get_statistics(struct fm_pcd_storage_profile_regs *regs,
-+					uint16_t index);
-+
-+void fman_vsp_set_statistics(struct fm_pcd_storage_profile_regs *regs,
-+			uint16_t index,	uint32_t value);
-+
-+
-+#endif /* __FSL_FMAN_SP_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_tgec.h
-@@ -0,0 +1,479 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __FSL_FMAN_TGEC_H
-+#define __FSL_FMAN_TGEC_H
-+
-+#include "common/general.h"
-+#include "fsl_enet.h"
-+
-+
-+/* Transmit Inter-Packet Gap Length Register (TX_IPG_LENGTH) */
-+#define TGEC_TX_IPG_LENGTH_MASK	0x000003ff
-+
-+enum tgec_counters {
-+	E_TGEC_COUNTER_R64,
-+	E_TGEC_COUNTER_R127,
-+	E_TGEC_COUNTER_R255,
-+	E_TGEC_COUNTER_R511,
-+	E_TGEC_COUNTER_R1023,
-+	E_TGEC_COUNTER_R1518,
-+	E_TGEC_COUNTER_R1519X,
-+	E_TGEC_COUNTER_TRFRG,
-+	E_TGEC_COUNTER_TRJBR,
-+	E_TGEC_COUNTER_RDRP,
-+	E_TGEC_COUNTER_RALN,
-+	E_TGEC_COUNTER_TRUND,
-+	E_TGEC_COUNTER_TROVR,
-+	E_TGEC_COUNTER_RXPF,
-+	E_TGEC_COUNTER_TXPF,
-+	E_TGEC_COUNTER_ROCT,
-+	E_TGEC_COUNTER_RMCA,
-+	E_TGEC_COUNTER_RBCA,
-+	E_TGEC_COUNTER_RPKT,
-+	E_TGEC_COUNTER_RUCA,
-+	E_TGEC_COUNTER_RERR,
-+	E_TGEC_COUNTER_TOCT,
-+	E_TGEC_COUNTER_TMCA,
-+	E_TGEC_COUNTER_TBCA,
-+	E_TGEC_COUNTER_TUCA,
-+	E_TGEC_COUNTER_TERR
-+};
-+
-+/* Command and Configuration Register (COMMAND_CONFIG) */
-+#define CMD_CFG_EN_TIMESTAMP	0x00100000
-+#define CMD_CFG_TX_ADDR_INS_SEL	0x00080000
-+#define CMD_CFG_NO_LEN_CHK	0x00020000
-+#define CMD_CFG_SEND_IDLE	0x00010000
-+#define CMD_CFG_RX_ER_DISC	0x00004000
-+#define CMD_CFG_CMD_FRM_EN	0x00002000
-+#define CMD_CFG_STAT_CLR	0x00001000
-+#define CMD_CFG_LOOPBACK_EN	0x00000400
-+#define CMD_CFG_TX_ADDR_INS	0x00000200
-+#define CMD_CFG_PAUSE_IGNORE	0x00000100
-+#define CMD_CFG_PAUSE_FWD	0x00000080
-+#define CMD_CFG_PROMIS_EN	0x00000010
-+#define CMD_CFG_WAN_MODE	0x00000008
-+#define CMD_CFG_RX_EN		0x00000002
-+#define CMD_CFG_TX_EN		0x00000001
-+
-+/* Interrupt Mask Register (IMASK) */
-+#define TGEC_IMASK_MDIO_SCAN_EVENT	0x00010000
-+#define TGEC_IMASK_MDIO_CMD_CMPL	0x00008000
-+#define TGEC_IMASK_REM_FAULT		0x00004000
-+#define TGEC_IMASK_LOC_FAULT		0x00002000
-+#define TGEC_IMASK_TX_ECC_ER		0x00001000
-+#define TGEC_IMASK_TX_FIFO_UNFL		0x00000800
-+#define TGEC_IMASK_TX_FIFO_OVFL		0x00000400
-+#define TGEC_IMASK_TX_ER			0x00000200
-+#define TGEC_IMASK_RX_FIFO_OVFL		0x00000100
-+#define TGEC_IMASK_RX_ECC_ER		0x00000080
-+#define TGEC_IMASK_RX_JAB_FRM		0x00000040
-+#define TGEC_IMASK_RX_OVRSZ_FRM		0x00000020
-+#define TGEC_IMASK_RX_RUNT_FRM		0x00000010
-+#define TGEC_IMASK_RX_FRAG_FRM		0x00000008
-+#define TGEC_IMASK_RX_LEN_ER		0x00000004
-+#define TGEC_IMASK_RX_CRC_ER		0x00000002
-+#define TGEC_IMASK_RX_ALIGN_ER		0x00000001
-+
-+#define TGEC_EVENTS_MASK					\
-+	((uint32_t)(TGEC_IMASK_MDIO_SCAN_EVENT			| \
-+				TGEC_IMASK_MDIO_CMD_CMPL	| \
-+				TGEC_IMASK_REM_FAULT		| \
-+				TGEC_IMASK_LOC_FAULT		| \
-+				TGEC_IMASK_TX_ECC_ER		| \
-+				TGEC_IMASK_TX_FIFO_UNFL		| \
-+				TGEC_IMASK_TX_FIFO_OVFL		| \
-+				TGEC_IMASK_TX_ER		| \
-+				TGEC_IMASK_RX_FIFO_OVFL		| \
-+				TGEC_IMASK_RX_ECC_ER		| \
-+				TGEC_IMASK_RX_JAB_FRM		| \
-+				TGEC_IMASK_RX_OVRSZ_FRM		| \
-+				TGEC_IMASK_RX_RUNT_FRM		| \
-+				TGEC_IMASK_RX_FRAG_FRM		| \
-+				TGEC_IMASK_RX_LEN_ER		| \
-+				TGEC_IMASK_RX_CRC_ER		| \
-+				TGEC_IMASK_RX_ALIGN_ER))
-+
-+/* Hashtable Control Register (HASHTABLE_CTRL) */
-+#define TGEC_HASH_MCAST_SHIFT	23
-+#define TGEC_HASH_MCAST_EN	0x00000200
-+#define TGEC_HASH_ADR_MSK	0x000001ff
-+
-+#define DEFAULT_WAN_MODE_ENABLE		FALSE
-+#define DEFAULT_PROMISCUOUS_MODE_ENABLE	FALSE
-+#define DEFAULT_PAUSE_FORWARD_ENABLE	FALSE
-+#define DEFAULT_PAUSE_IGNORE		FALSE
-+#define DEFAULT_TX_ADDR_INS_ENABLE	FALSE
-+#define DEFAULT_LOOPBACK_ENABLE		FALSE
-+#define DEFAULT_CMD_FRAME_ENABLE	FALSE
-+#define DEFAULT_RX_ERROR_DISCARD	FALSE
-+#define DEFAULT_SEND_IDLE_ENABLE	FALSE
-+#define DEFAULT_NO_LENGTH_CHECK_ENABLE	TRUE
-+#define DEFAULT_LGTH_CHECK_NOSTDR	FALSE
-+#define DEFAULT_TIME_STAMP_ENABLE	FALSE
-+#define DEFAULT_TX_IPG_LENGTH		12
-+#define DEFAULT_MAX_FRAME_LENGTH	0x600
-+#define DEFAULT_PAUSE_QUANT		0xf000
-+
-+/*
-+ * 10G memory map
-+ */
-+struct tgec_regs {
-+	uint32_t tgec_id;		/* 0x000 Controller ID */
-+	uint32_t reserved001[1];	/* 0x004 */
-+	uint32_t command_config;	/* 0x008 Control and configuration */
-+	uint32_t mac_addr_0;		/* 0x00c Lower 32 bits of the MAC adr */
-+	uint32_t mac_addr_1;		/* 0x010 Upper 16 bits of the MAC adr */
-+	uint32_t maxfrm;		/* 0x014 Maximum frame length */
-+	uint32_t pause_quant;		/* 0x018 Pause quanta */
-+	uint32_t rx_fifo_sections;	/* 0x01c  */
-+	uint32_t tx_fifo_sections;	/* 0x020  */
-+	uint32_t rx_fifo_almost_f_e;	/* 0x024  */
-+	uint32_t tx_fifo_almost_f_e;	/* 0x028  */
-+	uint32_t hashtable_ctrl;	/* 0x02c Hash table control*/
-+	uint32_t mdio_cfg_status;	/* 0x030  */
-+	uint32_t mdio_command;		/* 0x034  */
-+	uint32_t mdio_data;		/* 0x038  */
-+	uint32_t mdio_regaddr;		/* 0x03c  */
-+	uint32_t status;		/* 0x040  */
-+	uint32_t tx_ipg_len;		/* 0x044 Transmitter inter-packet-gap */
-+	uint32_t mac_addr_2;		/* 0x048 Lower 32 bits of 2nd MAC adr */
-+	uint32_t mac_addr_3;		/* 0x04c Upper 16 bits of 2nd MAC adr */
-+	uint32_t rx_fifo_ptr_rd;	/* 0x050  */
-+	uint32_t rx_fifo_ptr_wr;	/* 0x054  */
-+	uint32_t tx_fifo_ptr_rd;	/* 0x058  */
-+	uint32_t tx_fifo_ptr_wr;	/* 0x05c  */
-+	uint32_t imask;			/* 0x060 Interrupt mask */
-+	uint32_t ievent;		/* 0x064 Interrupt event */
-+	uint32_t udp_port;		/* 0x068 Defines a UDP Port number */
-+	uint32_t type_1588v2;		/* 0x06c Type field for 1588v2 */
-+	uint32_t reserved070[4];	/* 0x070 */
-+	/*10Ge Statistics Counter */
-+	uint32_t tfrm_u;		/* 80 aFramesTransmittedOK */
-+	uint32_t tfrm_l;		/* 84 aFramesTransmittedOK */
-+	uint32_t rfrm_u;		/* 88 aFramesReceivedOK */
-+	uint32_t rfrm_l;		/* 8c aFramesReceivedOK */
-+	uint32_t rfcs_u;		/* 90 aFrameCheckSequenceErrors */
-+	uint32_t rfcs_l;		/* 94 aFrameCheckSequenceErrors */
-+	uint32_t raln_u;		/* 98 aAlignmentErrors */
-+	uint32_t raln_l;		/* 9c aAlignmentErrors */
-+	uint32_t txpf_u;		/* A0 aPAUSEMACCtrlFramesTransmitted */
-+	uint32_t txpf_l;		/* A4 aPAUSEMACCtrlFramesTransmitted */
-+	uint32_t rxpf_u;		/* A8 aPAUSEMACCtrlFramesReceived */
-+	uint32_t rxpf_l;		/* Ac aPAUSEMACCtrlFramesReceived */
-+	uint32_t rlong_u;		/* B0 aFrameTooLongErrors */
-+	uint32_t rlong_l;		/* B4 aFrameTooLongErrors */
-+	uint32_t rflr_u;		/* B8 aInRangeLengthErrors */
-+	uint32_t rflr_l;		/* Bc aInRangeLengthErrors */
-+	uint32_t tvlan_u;		/* C0 VLANTransmittedOK */
-+	uint32_t tvlan_l;		/* C4 VLANTransmittedOK */
-+	uint32_t rvlan_u;		/* C8 VLANReceivedOK */
-+	uint32_t rvlan_l;		/* Cc VLANReceivedOK */
-+	uint32_t toct_u;		/* D0 ifOutOctets */
-+	uint32_t toct_l;		/* D4 ifOutOctets */
-+	uint32_t roct_u;		/* D8 ifInOctets */
-+	uint32_t roct_l;		/* Dc ifInOctets */
-+	uint32_t ruca_u;		/* E0 ifInUcastPkts */
-+	uint32_t ruca_l;		/* E4 ifInUcastPkts */
-+	uint32_t rmca_u;		/* E8 ifInMulticastPkts */
-+	uint32_t rmca_l;		/* Ec ifInMulticastPkts */
-+	uint32_t rbca_u;		/* F0 ifInBroadcastPkts */
-+	uint32_t rbca_l;		/* F4 ifInBroadcastPkts */
-+	uint32_t terr_u;		/* F8 ifOutErrors */
-+	uint32_t terr_l;		/* Fc ifOutErrors */
-+	uint32_t reserved100[2];	/* 100-108*/
-+	uint32_t tuca_u;		/* 108 ifOutUcastPkts */
-+	uint32_t tuca_l;		/* 10c ifOutUcastPkts */
-+	uint32_t tmca_u;		/* 110 ifOutMulticastPkts */
-+	uint32_t tmca_l;		/* 114 ifOutMulticastPkts */
-+	uint32_t tbca_u;		/* 118 ifOutBroadcastPkts */
-+	uint32_t tbca_l;		/* 11c ifOutBroadcastPkts */
-+	uint32_t rdrp_u;		/* 120 etherStatsDropEvents */
-+	uint32_t rdrp_l;		/* 124 etherStatsDropEvents */
-+	uint32_t reoct_u;		/* 128 etherStatsOctets */
-+	uint32_t reoct_l;		/* 12c etherStatsOctets */
-+	uint32_t rpkt_u;		/* 130 etherStatsPkts */
-+	uint32_t rpkt_l;		/* 134 etherStatsPkts */
-+	uint32_t trund_u;		/* 138 etherStatsUndersizePkts */
-+	uint32_t trund_l;		/* 13c etherStatsUndersizePkts */
-+	uint32_t r64_u;			/* 140 etherStatsPkts64Octets */
-+	uint32_t r64_l;			/* 144 etherStatsPkts64Octets */
-+	uint32_t r127_u;		/* 148 etherStatsPkts65to127Octets */
-+	uint32_t r127_l;		/* 14c etherStatsPkts65to127Octets */
-+	uint32_t r255_u;		/* 150 etherStatsPkts128to255Octets */
-+	uint32_t r255_l;		/* 154 etherStatsPkts128to255Octets */
-+	uint32_t r511_u;		/* 158 etherStatsPkts256to511Octets */
-+	uint32_t r511_l;		/* 15c etherStatsPkts256to511Octets */
-+	uint32_t r1023_u;		/* 160 etherStatsPkts512to1023Octets */
-+	uint32_t r1023_l;		/* 164 etherStatsPkts512to1023Octets */
-+	uint32_t r1518_u;		/* 168 etherStatsPkts1024to1518Octets */
-+	uint32_t r1518_l;		/* 16c etherStatsPkts1024to1518Octets */
-+	uint32_t r1519x_u;		/* 170 etherStatsPkts1519toX */
-+	uint32_t r1519x_l;		/* 174 etherStatsPkts1519toX */
-+	uint32_t trovr_u;		/* 178 etherStatsOversizePkts */
-+	uint32_t trovr_l;		/* 17c etherStatsOversizePkts */
-+	uint32_t trjbr_u;		/* 180 etherStatsJabbers */
-+	uint32_t trjbr_l;		/* 184 etherStatsJabbers */
-+	uint32_t trfrg_u;		/* 188 etherStatsFragments */
-+	uint32_t trfrg_l;		/* 18C etherStatsFragments */
-+	uint32_t rerr_u;		/* 190 ifInErrors */
-+	uint32_t rerr_l;		/* 194 ifInErrors */
-+};
-+
-+/**
-+ * struct tgec_cfg - TGEC configuration
-+ *
-+ * @rx_error_discard:    Receive Erroneous Frame Discard Enable. When set to 1
-+ *            any frame received with an error is discarded in the
-+ *            Core and not forwarded to the Client interface.
-+ *            When set to 0 (Reset value), erroneous Frames are
-+ *            forwarded to the Client interface with ff_rx_err
-+ *            asserted.
-+ * @pause_ignore:    Ignore Pause Frame Quanta. If set to 1 received pause
-+ *            frames are ignored by the MAC. When set to 0
-+ *            (Reset value) the transmit process is stopped for the
-+ *            amount of time specified in the pause quanta received
-+ *            within a pause frame.
-+ * @pause_forward_enable:
-+ *            Terminate / Forward Pause Frames. If set to 1 pause
-+ *            frames are forwarded to the user application. When set
-+ *            to 0 (Reset value) pause frames are terminated and
-+ *            discarded within the MAC.
-+ * @no_length_check_enable:
-+ *            Payload Length Check Disable. When set to 0
-+ *            (Reset value), the Core checks the frame's payload
-+ *            length with the Frame Length/Type field, when set to 1
-+ *            the payload length check is disabled.
-+ * @cmd_frame_enable:    Enables reception of all command frames. When set to 1
-+ *            all Command Frames are accepted, when set to 0
-+ *            (Reset Value) only Pause Frames are accepted and all
-+ *            other Command Frames are rejected.
-+ * @send_idle_enable:    Force Idle Generation. When set to 1, the MAC
-+ *            permanently sends XGMII Idle sequences even when faults
-+ *            are received.
-+ * @wan_mode_enable:    WAN Mode Enable. Sets WAN mode (1) or LAN mode
-+ *            (0, default) of operation.
-+ * @promiscuous_mode_enable:
-+ *            Enables MAC promiscuous operation. When set to 1, all
-+ *            frames are received without any MAC address filtering,
-+ *            when set to 0 (Reset value) Unicast Frames with a
-+ *            destination address not matching the Core MAC Address
-+ *            (MAC Address programmed in Registers MAC_ADDR_0 and
-+ *            MAC_ADDR_1 or the MAC address programmed in Registers
-+ *            MAC_ADDR_2 and MAC_ADDR_3) are rejected.
-+ * @tx_addr_ins_enable:    Set Source MAC Address on Transmit. If set to 1 the
-+ *            MAC overwrites the source MAC address received from the
-+ *            Client Interface with one of the MAC addresses. If set
-+ *            to 0 (Reset value), the source MAC address from the
-+ *            Client Interface is transmitted unmodified to the line.
-+ * @loopback_enable:    PHY Interface Loopback. When set to 1, the signal
-+ *            loop_ena is set to '1', when set to 0 (Reset value)
-+ *            the signal loop_ena is set to 0.
-+ * @lgth_check_nostdr:    The Core interprets the Length/Type field differently
-+ *            depending on the value of this Bit
-+ * @time_stamp_enable:    This bit selects between enabling and disabling the
-+ *            IEEE 1588 functionality. 1: IEEE 1588 is enabled
-+ *            0: IEEE 1588 is disabled
-+ * @max_frame_length:    Maximum supported received frame length.
-+ *            The 10GEC MAC supports reception of any frame size up
-+ *            to 16,352 bytes (0x3FE0). Typical settings are
-+ *            0x05EE (1,518 bytes) for standard frames.
-+ *            Default setting is 0x0600 (1,536 bytes).
-+ *            Received frames that exceed this stated maximum
-+ *            are truncated.
-+ * @pause_quant:    Pause quanta value used with transmitted pause frames.
-+ *            Each quanta represents a 512 bit-times.
-+ * @tx_ipg_length:    Transmit Inter-Packet-Gap (IPG) value. A 6-bit value:
-+ *            Depending on LAN or WAN mode of operation the value has
-+ *            the following meaning: - LAN Mode: Number of octets in
-+ *            steps of 4. Valid values are 8, 12, 16, ... 100. DIC is
-+ *            fully supported (see 10.6.1 page 49) for any setting. A
-+ *            default of 12 (reset value) must be set to conform to
-+ *            IEEE802.3ae. Warning: When set to 8, PCS layers may not
-+ *            be able to perform clock rate compensation. - WAN Mode:
-+ *            Stretch factor. Valid values are 4..15. The stretch
-+ *            factor is calculated as (value+1)*8. A default of 12
-+ *            (reset value) must be set to conform to IEEE 802.3ae
-+ *            (i.e. 13*8=104). A larger value shrinks the IPG
-+ *            (increasing bandwidth).
-+ *
-+ * This structure contains basic TGEC configuration and must be passed to
-+ * fman_tgec_init() function.  A default set of configuration values can be
-+ * obtained by calling fman_tgec_defconfig().
-+ */
-+struct tgec_cfg {
-+	bool		rx_error_discard;
-+	bool		pause_ignore;
-+	bool		pause_forward_enable;
-+	bool		no_length_check_enable;
-+	bool		cmd_frame_enable;
-+	bool		send_idle_enable;
-+	bool		wan_mode_enable;
-+	bool		promiscuous_mode_enable;
-+	bool		tx_addr_ins_enable;
-+	bool		loopback_enable;
-+	bool		lgth_check_nostdr;
-+	bool		time_stamp_enable;
-+	uint16_t	max_frame_length;
-+	uint16_t	pause_quant;
-+	uint32_t	tx_ipg_length;
-+	bool		skip_fman11_workaround;
-+};
-+
-+
-+void fman_tgec_defconfig(struct tgec_cfg *cfg);
-+
-+/**
-+ * fman_tgec_init() - Init tgec hardware block
-+ * @regs:        Pointer to tgec register block
-+ * @cfg:        tgec configuration data
-+ * @exceptions_mask:    initial exceptions mask
-+ *
-+ * This function initializes the tgec controller and applies its
-+ * basic configuration.
-+ *
-+ * Returns: 0 if successful, an error code otherwise.
-+ */
-+
-+int fman_tgec_init(struct tgec_regs *regs, struct tgec_cfg *cfg,
-+	uint32_t exception_mask);
-+
-+void fman_tgec_enable(struct tgec_regs *regs, bool apply_rx, bool apply_tx);
-+
-+void fman_tgec_disable(struct tgec_regs *regs, bool apply_rx, bool apply_tx);
-+
-+uint32_t fman_tgec_get_revision(struct tgec_regs *regs);
-+
-+void fman_tgec_set_mac_address(struct tgec_regs *regs, uint8_t *macaddr);
-+
-+void fman_tgec_set_promiscuous(struct tgec_regs *regs, bool val);
-+
-+/**
-+ * fman_tgec_reset_stat() - Completely resets all TGEC HW counters
-+ * @regs:    Pointer to TGEC register block
-+ */
-+void fman_tgec_reset_stat(struct tgec_regs *regs);
-+
-+/**
-+ * fman_tgec_get_counter() - Reads TGEC HW counters
-+ * @regs:    Pointer to TGEC register block
-+ * @reg_name:    Counter name according to the appropriate enum
-+ *
-+ * Returns:    Required counter value
-+ */
-+uint64_t fman_tgec_get_counter(struct tgec_regs *regs,
-+	enum tgec_counters reg_name);
-+
-+/**
-+ * fman_tgec_set_hash_table() - Sets the Hashtable Control Register
-+ * @regs:    Pointer to TGEC register block
-+ * @value:    Value to be written in Hashtable Control Register
-+ */
-+void fman_tgec_set_hash_table(struct tgec_regs *regs, uint32_t value);
-+
-+/**
-+ * fman_tgec_set_tx_pause_frames() - Sets the Pause Quanta Register
-+ * @regs:    Pointer to TGEC register block
-+ * @pause_time:    Pause quanta value used with transmitted pause frames.
-+ *        Each quanta represents a 512 bit-times
-+ */
-+void fman_tgec_set_tx_pause_frames(struct tgec_regs *regs, uint16_t pause_time);
-+
-+/**
-+ * fman_tgec_set_rx_ignore_pause_frames() - Changes the policy WRT pause frames
-+ * @regs:    Pointer to TGEC register block
-+ * @en:        Ignore/Respond to pause frame quanta
-+ *
-+ * Sets the value of PAUSE_IGNORE field in the COMMAND_CONFIG Register
-+ * 0 - MAC stops transmit process for the duration specified
-+ * in the Pause frame quanta of a received Pause frame.
-+ * 1 - MAC ignores received Pause frames.
-+ */
-+void fman_tgec_set_rx_ignore_pause_frames(struct tgec_regs *regs, bool en);
-+
-+/**
-+ * fman_tgec_enable_1588_time_stamp() - change timestamp functionality
-+ * @regs:    Pointer to TGEC register block
-+ * @en:        enable/disable timestamp functionality
-+ *
-+ * Sets the value of EN_TIMESTAMP field in the COMMAND_CONFIG Register
-+ * IEEE 1588 timestamp functionality control:
-+ * 0 disabled, 1 enabled
-+ */
-+
-+void fman_tgec_enable_1588_time_stamp(struct tgec_regs *regs, bool en);
-+
-+uint32_t fman_tgec_get_event(struct tgec_regs *regs, uint32_t ev_mask);
-+
-+void fman_tgec_ack_event(struct tgec_regs *regs, uint32_t ev_mask);
-+
-+uint32_t fman_tgec_get_interrupt_mask(struct tgec_regs *regs);
-+
-+/**
-+ * fman_tgec_add_addr_in_paddr() - Sets additional exact match MAC address
-+ * @regs:    Pointer to TGEC register block
-+ * @addr_ptr:    Pointer to 6-byte array containing the MAC address
-+ *
-+ * Sets the additional station MAC address
-+ */
-+void fman_tgec_add_addr_in_paddr(struct tgec_regs *regs, uint8_t *addr_ptr);
-+
-+void fman_tgec_clear_addr_in_paddr(struct tgec_regs *regs);
-+
-+void fman_tgec_enable_interrupt(struct tgec_regs *regs, uint32_t ev_mask);
-+
-+void fman_tgec_disable_interrupt(struct tgec_regs *regs, uint32_t ev_mask);
-+
-+void fman_tgec_reset_filter_table(struct tgec_regs *regs);
-+
-+void fman_tgec_set_hash_table_entry(struct tgec_regs *regs, uint32_t crc);
-+
-+
-+/**
-+ * fman_tgec_get_max_frame_len() - Returns the maximum frame length value
-+ * @regs:    Pointer to TGEC register block
-+ */
-+uint16_t fman_tgec_get_max_frame_len(struct tgec_regs *regs);
-+
-+/**
-+ * fman_tgec_set_erratum_tx_fifo_corruption_10gmac_a007() - Initialize the
-+ * main tgec configuration parameters
-+ * @regs:    Pointer to TGEC register block
-+ *
-+ * TODO
-+ */
-+void fman_tgec_set_erratum_tx_fifo_corruption_10gmac_a007(struct tgec_regs
-+	*regs);
-+
-+
-+#endif /* __FSL_FMAN_TGEC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/FMANV3H/dpaa_integration_ext.h
-@@ -0,0 +1,291 @@
-+/*
-+ * Copyright 2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**
-+
-+ @File          dpaa_integration_ext.h
-+
-+ @Description   T4240 FM external definitions and structures.
-+*//***************************************************************************/
-+#ifndef __DPAA_INTEGRATION_EXT_H
-+#define __DPAA_INTEGRATION_EXT_H
-+
-+#include "std_ext.h"
-+
-+
-+#define DPAA_VERSION    11
-+
-+/**************************************************************************//**
-+ @Description   DPAA SW Portals Enumeration.
-+*//***************************************************************************/
-+typedef enum
-+{
-+    e_DPAA_SWPORTAL0 = 0,
-+    e_DPAA_SWPORTAL1,
-+    e_DPAA_SWPORTAL2,
-+    e_DPAA_SWPORTAL3,
-+    e_DPAA_SWPORTAL4,
-+    e_DPAA_SWPORTAL5,
-+    e_DPAA_SWPORTAL6,
-+    e_DPAA_SWPORTAL7,
-+    e_DPAA_SWPORTAL8,
-+    e_DPAA_SWPORTAL9,
-+    e_DPAA_SWPORTAL10,
-+    e_DPAA_SWPORTAL11,
-+    e_DPAA_SWPORTAL12,
-+    e_DPAA_SWPORTAL13,
-+    e_DPAA_SWPORTAL14,
-+    e_DPAA_SWPORTAL15,
-+    e_DPAA_SWPORTAL16,
-+    e_DPAA_SWPORTAL17,
-+    e_DPAA_SWPORTAL18,
-+    e_DPAA_SWPORTAL19,
-+    e_DPAA_SWPORTAL20,
-+    e_DPAA_SWPORTAL21,
-+    e_DPAA_SWPORTAL22,
-+    e_DPAA_SWPORTAL23,
-+    e_DPAA_SWPORTAL24,
-+    e_DPAA_SWPORTAL_DUMMY_LAST
-+} e_DpaaSwPortal;
-+
-+/**************************************************************************//**
-+ @Description   DPAA Direct Connect Portals Enumeration.
-+*//***************************************************************************/
-+typedef enum
-+{
-+    e_DPAA_DCPORTAL0 = 0,
-+    e_DPAA_DCPORTAL1,
-+    e_DPAA_DCPORTAL2,
-+    e_DPAA_DCPORTAL_DUMMY_LAST
-+} e_DpaaDcPortal;
-+
-+#define DPAA_MAX_NUM_OF_SW_PORTALS      e_DPAA_SWPORTAL_DUMMY_LAST
-+#define DPAA_MAX_NUM_OF_DC_PORTALS      e_DPAA_DCPORTAL_DUMMY_LAST
-+
-+/*****************************************************************************
-+ QMan INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define QM_MAX_NUM_OF_POOL_CHANNELS     15      /**< Total number of channels, dedicated and pool */
-+#define QM_MAX_NUM_OF_WQ                8       /**< Number of work queues per channel */
-+#define QM_MAX_NUM_OF_CGS               256     /**< Congestion groups number */
-+#define QM_MAX_NUM_OF_FQIDS             (16 * MEGABYTE)
-+                                                /**< FQIDs range - 24 bits */
-+
-+/**************************************************************************//**
-+ @Description   Work Queue Channel assignments in QMan.
-+*//***************************************************************************/
-+typedef enum
-+{
-+    e_QM_FQ_CHANNEL_SWPORTAL0 = 0x0,              /**< Dedicated channels serviced by software portals 0 to 24 */
-+    e_QM_FQ_CHANNEL_SWPORTAL1,
-+    e_QM_FQ_CHANNEL_SWPORTAL2,
-+    e_QM_FQ_CHANNEL_SWPORTAL3,
-+    e_QM_FQ_CHANNEL_SWPORTAL4,
-+    e_QM_FQ_CHANNEL_SWPORTAL5,
-+    e_QM_FQ_CHANNEL_SWPORTAL6,
-+    e_QM_FQ_CHANNEL_SWPORTAL7,
-+    e_QM_FQ_CHANNEL_SWPORTAL8,
-+    e_QM_FQ_CHANNEL_SWPORTAL9,
-+    e_QM_FQ_CHANNEL_SWPORTAL10,
-+    e_QM_FQ_CHANNEL_SWPORTAL11,
-+    e_QM_FQ_CHANNEL_SWPORTAL12,
-+    e_QM_FQ_CHANNEL_SWPORTAL13,
-+    e_QM_FQ_CHANNEL_SWPORTAL14,
-+    e_QM_FQ_CHANNEL_SWPORTAL15,
-+    e_QM_FQ_CHANNEL_SWPORTAL16,
-+    e_QM_FQ_CHANNEL_SWPORTAL17,
-+    e_QM_FQ_CHANNEL_SWPORTAL18,
-+    e_QM_FQ_CHANNEL_SWPORTAL19,
-+    e_QM_FQ_CHANNEL_SWPORTAL20,
-+    e_QM_FQ_CHANNEL_SWPORTAL21,
-+    e_QM_FQ_CHANNEL_SWPORTAL22,
-+    e_QM_FQ_CHANNEL_SWPORTAL23,
-+    e_QM_FQ_CHANNEL_SWPORTAL24,
-+
-+    e_QM_FQ_CHANNEL_POOL1 = 0x401,               /**< Pool channels that can be serviced by any of the software portals */
-+    e_QM_FQ_CHANNEL_POOL2,
-+    e_QM_FQ_CHANNEL_POOL3,
-+    e_QM_FQ_CHANNEL_POOL4,
-+    e_QM_FQ_CHANNEL_POOL5,
-+    e_QM_FQ_CHANNEL_POOL6,
-+    e_QM_FQ_CHANNEL_POOL7,
-+    e_QM_FQ_CHANNEL_POOL8,
-+    e_QM_FQ_CHANNEL_POOL9,
-+    e_QM_FQ_CHANNEL_POOL10,
-+    e_QM_FQ_CHANNEL_POOL11,
-+    e_QM_FQ_CHANNEL_POOL12,
-+    e_QM_FQ_CHANNEL_POOL13,
-+    e_QM_FQ_CHANNEL_POOL14,
-+    e_QM_FQ_CHANNEL_POOL15,
-+
-+    e_QM_FQ_CHANNEL_FMAN0_SP0 = 0x800,           /**< Dedicated channels serviced by Direct Connect Portal 0:
-+                                                      connected to FMan 0; assigned in incrementing order to
-+                                                      each sub-portal (SP) in the portal */
-+    e_QM_FQ_CHANNEL_FMAN0_SP1,
-+    e_QM_FQ_CHANNEL_FMAN0_SP2,
-+    e_QM_FQ_CHANNEL_FMAN0_SP3,
-+    e_QM_FQ_CHANNEL_FMAN0_SP4,
-+    e_QM_FQ_CHANNEL_FMAN0_SP5,
-+    e_QM_FQ_CHANNEL_FMAN0_SP6,
-+    e_QM_FQ_CHANNEL_FMAN0_SP7,
-+    e_QM_FQ_CHANNEL_FMAN0_SP8,
-+    e_QM_FQ_CHANNEL_FMAN0_SP9,
-+    e_QM_FQ_CHANNEL_FMAN0_SP10,
-+    e_QM_FQ_CHANNEL_FMAN0_SP11,
-+    e_QM_FQ_CHANNEL_FMAN0_SP12,
-+    e_QM_FQ_CHANNEL_FMAN0_SP13,
-+    e_QM_FQ_CHANNEL_FMAN0_SP14,
-+    e_QM_FQ_CHANNEL_FMAN0_SP15,
-+
-+    e_QM_FQ_CHANNEL_RMAN_SP0 = 0x820,            /**< Dedicated channels serviced by Direct Connect Portal 1: connected to RMan */
-+    e_QM_FQ_CHANNEL_RMAN_SP1,
-+
-+    e_QM_FQ_CHANNEL_CAAM = 0x840                 /**< Dedicated channel serviced by Direct Connect Portal 2:
-+                                                      connected to SEC */
-+} e_QmFQChannel;
-+
-+/*****************************************************************************
-+ BMan INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define BM_MAX_NUM_OF_POOLS         64          /**< Number of buffers pools */
-+
-+/*****************************************************************************
-+ SEC INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define SEC_NUM_OF_DECOS            3
-+#define SEC_ALL_DECOS_MASK          0x00000003
-+
-+
-+/*****************************************************************************
-+ FM INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define INTG_MAX_NUM_OF_FM          2
-+/* Ports defines */
-+#define FM_MAX_NUM_OF_1G_MACS       6
-+#define FM_MAX_NUM_OF_10G_MACS      2
-+#define FM_MAX_NUM_OF_MACS          (FM_MAX_NUM_OF_1G_MACS + FM_MAX_NUM_OF_10G_MACS)
-+#define FM_MAX_NUM_OF_OH_PORTS      6
-+
-+#define FM_MAX_NUM_OF_1G_RX_PORTS   FM_MAX_NUM_OF_1G_MACS
-+#define FM_MAX_NUM_OF_10G_RX_PORTS  FM_MAX_NUM_OF_10G_MACS
-+#define FM_MAX_NUM_OF_RX_PORTS      (FM_MAX_NUM_OF_10G_RX_PORTS + FM_MAX_NUM_OF_1G_RX_PORTS)
-+
-+#define FM_MAX_NUM_OF_1G_TX_PORTS   FM_MAX_NUM_OF_1G_MACS
-+#define FM_MAX_NUM_OF_10G_TX_PORTS  FM_MAX_NUM_OF_10G_MACS
-+#define FM_MAX_NUM_OF_TX_PORTS      (FM_MAX_NUM_OF_10G_TX_PORTS + FM_MAX_NUM_OF_1G_TX_PORTS)
-+
-+#define FM_PORT_MAX_NUM_OF_EXT_POOLS            4           /**< Number of external BM pools per Rx port */
-+#define FM_PORT_NUM_OF_CONGESTION_GRPS          256         /**< Total number of congestion groups in QM */
-+#define FM_MAX_NUM_OF_SUB_PORTALS               16
-+#define FM_PORT_MAX_NUM_OF_OBSERVED_EXT_POOLS   0
-+
-+#define FM_VSP_MAX_NUM_OF_ENTRIES               64
-+#define FM_MAX_NUM_OF_PFC_PRIORITIES            8
-+
-+/* RAMs defines */
-+#define FM_MURAM_SIZE                   (384 * KILOBYTE)
-+#define FM_IRAM_SIZE(major, minor)      (64 * KILOBYTE)
-+#define FM_NUM_OF_CTRL                  4
-+
-+/* PCD defines */
-+#define FM_PCD_PLCR_NUM_ENTRIES         256                 /**< Total number of policer profiles */
-+#define FM_PCD_KG_NUM_OF_SCHEMES        32                  /**< Total number of KG schemes */
-+#define FM_PCD_MAX_NUM_OF_CLS_PLANS     256                 /**< Number of classification plan entries. */
-+#define FM_PCD_PRS_SW_PATCHES_SIZE      0x00000600          /**< Number of bytes saved for patches */
-+#define FM_PCD_SW_PRS_SIZE              0x00000800          /**< Total size of SW parser area */
-+
-+/* RTC defines */
-+#define FM_RTC_NUM_OF_ALARMS            2                   /**< RTC number of alarms */
-+#define FM_RTC_NUM_OF_PERIODIC_PULSES   3                   /**< RTC number of periodic pulses */
-+#define FM_RTC_NUM_OF_EXT_TRIGGERS      2                   /**< RTC number of external triggers */
-+
-+/* QMI defines */
-+#define QMI_MAX_NUM_OF_TNUMS            64
-+#define QMI_DEF_TNUMS_THRESH            32
-+/* FPM defines */
-+#define FM_NUM_OF_FMAN_CTRL_EVENT_REGS  4
-+
-+/* DMA defines */
-+#define DMA_THRESH_MAX_COMMQ            83
-+#define DMA_THRESH_MAX_BUF              127
-+
-+/* BMI defines */
-+#define BMI_MAX_NUM_OF_TASKS            128
-+#define BMI_MAX_NUM_OF_DMAS             84
-+
-+#define BMI_MAX_FIFO_SIZE               (FM_MURAM_SIZE)
-+#define PORT_MAX_WEIGHT                 16
-+
-+#define FM_CHECK_PORT_RESTRICTIONS(__validPorts, __newPortIndx)   TRUE
-+
-+/* Unique T4240 */
-+#define FM_OP_OPEN_DMA_MIN_LIMIT
-+#define FM_NO_RESTRICT_ON_ACCESS_RSRC
-+#define FM_NO_OP_OBSERVED_POOLS
-+#define FM_FRAME_END_PARAMS_FOR_OP
-+#define FM_DEQ_PIPELINE_PARAMS_FOR_OP
-+#define FM_QMI_NO_SINGLE_ECC_EXCEPTION
-+
-+#define FM_NO_GUARANTEED_RESET_VALUES
-+
-+/* FM errata */
-+#define FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669
-+#define FM_WRONG_RESET_VALUES_ERRATA_FMAN_A005127
-+#define FM_RX_FIFO_CORRUPT_ERRATA_10GMAC_A006320
-+#define FM_OP_NO_VSP_NO_RELEASE_ERRATA_FMAN_A006675
-+#define FM_HEAVY_TRAFFIC_SEQUENCER_HANG_ERRATA_FMAN_A006981
-+#define FM_HANG_AT_RESET_MAC_CLK_DISABLED_ERRATA_FMAN_A007273
-+
-+#define FM_BCB_ERRATA_BMI_SW001
-+#define FM_LEN_CHECK_ERRATA_FMAN_SW002
-+#define FM_AID_MODE_NO_TNUM_SW005 /* refer to pdm TKT068794 - only support of port_id on aid */
-+#define FM_ERROR_VSP_NO_MATCH_SW006 /* refer to pdm TKT174304 - no match between errorQ and VSP */
-+
-+/*****************************************************************************
-+ RMan INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define RM_MAX_NUM_OF_IB        4           /**< Number of inbound blocks */
-+#define RM_NUM_OF_IBCU          8           /**< NUmber of classification units in an inbound block */
-+
-+/* RMan erratas */
-+#define RM_ERRONEOUS_ACK_ERRATA_RMAN_A006756
-+
-+/*****************************************************************************
-+ FM MACSEC INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define NUM_OF_RX_SC                16
-+#define NUM_OF_TX_SC                16
-+
-+#define NUM_OF_SA_PER_RX_SC         2
-+#define NUM_OF_SA_PER_TX_SC         2
-+
-+#endif /* __DPAA_INTEGRATION_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/FMANV3H/part_ext.h
-@@ -0,0 +1,71 @@
-+/*
-+ * Copyright 2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**************************************************************************//**
-+
-+ @File          part_ext.h
-+
-+ @Description   Definitions for the part (integration) module.
-+*//***************************************************************************/
-+
-+#ifndef __PART_EXT_H
-+#define __PART_EXT_H
-+
-+#include "std_ext.h"
-+#include "part_integration_ext.h"
-+
-+#if !(defined(P1023) || \
-+      defined(P2041) || \
-+      defined(P3041) || \
-+      defined(P4080) || \
-+      defined(P5020) || \
-+      defined(P5040) || \
-+      defined(B4860) || \
-+      defined(T4240))
-+#error "unable to proceed without chip-definition"
-+#endif
-+
-+
-+/**************************************************************************//*
-+ @Description   Part data structure - must be contained in any integration
-+                data structure.
-+*//***************************************************************************/
-+typedef struct t_Part
-+{
-+    uintptr_t   (* f_GetModuleBase)(t_Handle h_Part, e_ModuleId moduleId);
-+                /**< Returns the address of the module's memory map base. */
-+    e_ModuleId  (* f_GetModuleIdByBase)(t_Handle h_Part, uintptr_t baseAddress);
-+                /**< Returns the module's ID according to its memory map base. */
-+} t_Part;
-+
-+
-+#endif /* __PART_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/FMANV3H/part_integration_ext.h
-@@ -0,0 +1,304 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**
-+
-+ @File          part_integration_ext.h
-+
-+ @Description   T4240 external definitions and structures.
-+*//***************************************************************************/
-+#ifndef __PART_INTEGRATION_EXT_H
-+#define __PART_INTEGRATION_EXT_H
-+
-+#include "std_ext.h"
-+#include "ddr_std_ext.h"
-+#include "enet_ext.h"
-+#include "dpaa_integration_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         T4240_chip_id T4240 Application Programming Interface
-+
-+ @Description   T4240 Chip functions,definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+#define CORE_E6500
-+
-+#define INTG_MAX_NUM_OF_CORES   24
-+
-+
-+/**************************************************************************//**
-+ @Description   Module types.
-+*//***************************************************************************/
-+typedef enum e_ModuleId
-+{
-+    e_MODULE_ID_DUART_1 = 0,
-+    e_MODULE_ID_DUART_2,
-+    e_MODULE_ID_DUART_3,
-+    e_MODULE_ID_DUART_4,
-+    e_MODULE_ID_LAW,
-+    e_MODULE_ID_IFC,
-+    e_MODULE_ID_PAMU,
-+    e_MODULE_ID_QM,                 /**< Queue manager module */
-+    e_MODULE_ID_BM,                 /**< Buffer manager module */
-+    e_MODULE_ID_QM_CE_PORTAL_0,
-+    e_MODULE_ID_QM_CI_PORTAL_0,
-+    e_MODULE_ID_QM_CE_PORTAL_1,
-+    e_MODULE_ID_QM_CI_PORTAL_1,
-+    e_MODULE_ID_QM_CE_PORTAL_2,
-+    e_MODULE_ID_QM_CI_PORTAL_2,
-+    e_MODULE_ID_QM_CE_PORTAL_3,
-+    e_MODULE_ID_QM_CI_PORTAL_3,
-+    e_MODULE_ID_QM_CE_PORTAL_4,
-+    e_MODULE_ID_QM_CI_PORTAL_4,
-+    e_MODULE_ID_QM_CE_PORTAL_5,
-+    e_MODULE_ID_QM_CI_PORTAL_5,
-+    e_MODULE_ID_QM_CE_PORTAL_6,
-+    e_MODULE_ID_QM_CI_PORTAL_6,
-+    e_MODULE_ID_QM_CE_PORTAL_7,
-+    e_MODULE_ID_QM_CI_PORTAL_7,
-+    e_MODULE_ID_QM_CE_PORTAL_8,
-+    e_MODULE_ID_QM_CI_PORTAL_8,
-+    e_MODULE_ID_QM_CE_PORTAL_9,
-+    e_MODULE_ID_QM_CI_PORTAL_9,
-+    e_MODULE_ID_BM_CE_PORTAL_0,
-+    e_MODULE_ID_BM_CI_PORTAL_0,
-+    e_MODULE_ID_BM_CE_PORTAL_1,
-+    e_MODULE_ID_BM_CI_PORTAL_1,
-+    e_MODULE_ID_BM_CE_PORTAL_2,
-+    e_MODULE_ID_BM_CI_PORTAL_2,
-+    e_MODULE_ID_BM_CE_PORTAL_3,
-+    e_MODULE_ID_BM_CI_PORTAL_3,
-+    e_MODULE_ID_BM_CE_PORTAL_4,
-+    e_MODULE_ID_BM_CI_PORTAL_4,
-+    e_MODULE_ID_BM_CE_PORTAL_5,
-+    e_MODULE_ID_BM_CI_PORTAL_5,
-+    e_MODULE_ID_BM_CE_PORTAL_6,
-+    e_MODULE_ID_BM_CI_PORTAL_6,
-+    e_MODULE_ID_BM_CE_PORTAL_7,
-+    e_MODULE_ID_BM_CI_PORTAL_7,
-+    e_MODULE_ID_BM_CE_PORTAL_8,
-+    e_MODULE_ID_BM_CI_PORTAL_8,
-+    e_MODULE_ID_BM_CE_PORTAL_9,
-+    e_MODULE_ID_BM_CI_PORTAL_9,
-+    e_MODULE_ID_FM,                 /**< Frame manager module */
-+    e_MODULE_ID_FM_RTC,             /**< FM Real-Time-Clock */
-+    e_MODULE_ID_FM_MURAM,           /**< FM Multi-User-RAM */
-+    e_MODULE_ID_FM_BMI,             /**< FM BMI block */
-+    e_MODULE_ID_FM_QMI,             /**< FM QMI block */
-+    e_MODULE_ID_FM_PARSER,          /**< FM parser block */
-+    e_MODULE_ID_FM_PORT_HO1,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO2,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO3,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO4,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO5,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO6,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO7,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_1GRx1,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx2,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx3,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx4,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx5,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx6,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_10GRx1,     /**< FM Rx 10G MAC port block */
-+    e_MODULE_ID_FM_PORT_10GRx2,     /**< FM Rx 10G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx1,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx2,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx3,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx4,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx5,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx6,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_10GTx1,     /**< FM Tx 10G MAC port block */
-+    e_MODULE_ID_FM_PORT_10GTx2,     /**< FM Tx 10G MAC port block */
-+    e_MODULE_ID_FM_PLCR,            /**< FM Policer */
-+    e_MODULE_ID_FM_KG,              /**< FM Keygen */
-+    e_MODULE_ID_FM_DMA,             /**< FM DMA */
-+    e_MODULE_ID_FM_FPM,             /**< FM FPM */
-+    e_MODULE_ID_FM_IRAM,            /**< FM Instruction-RAM */
-+    e_MODULE_ID_FM_1GMDIO,          /**< FM 1G MDIO MAC */
-+    e_MODULE_ID_FM_10GMDIO,         /**< FM 10G MDIO */
-+    e_MODULE_ID_FM_PRS_IRAM,        /**< FM SW-parser Instruction-RAM */
-+    e_MODULE_ID_FM_1GMAC1,          /**< FM 1G MAC #1 */
-+    e_MODULE_ID_FM_1GMAC2,          /**< FM 1G MAC #2 */
-+    e_MODULE_ID_FM_1GMAC3,          /**< FM 1G MAC #3 */
-+    e_MODULE_ID_FM_1GMAC4,          /**< FM 1G MAC #4 */
-+    e_MODULE_ID_FM_1GMAC5,          /**< FM 1G MAC #5 */
-+    e_MODULE_ID_FM_1GMAC6,          /**< FM 1G MAC #6 */
-+    e_MODULE_ID_FM_10GMAC1,         /**< FM 10G MAC */
-+    e_MODULE_ID_FM_10GMAC2,         /**< FM 10G MAC */
-+
-+    e_MODULE_ID_SEC_GEN,            /**< SEC 4.0 General registers      */
-+    e_MODULE_ID_SEC_QI,             /**< SEC 4.0 QI registers           */
-+    e_MODULE_ID_SEC_JQ0,            /**< SEC 4.0 JQ-0 registers         */
-+    e_MODULE_ID_SEC_JQ1,            /**< SEC 4.0 JQ-1 registers         */
-+    e_MODULE_ID_SEC_JQ2,            /**< SEC 4.0 JQ-2 registers         */
-+    e_MODULE_ID_SEC_JQ3,            /**< SEC 4.0 JQ-3 registers         */
-+    e_MODULE_ID_SEC_RTIC,           /**< SEC 4.0 RTIC registers         */
-+    e_MODULE_ID_SEC_DECO0_CCB0,     /**< SEC 4.0 DECO-0/CCB-0 registers */
-+    e_MODULE_ID_SEC_DECO1_CCB1,     /**< SEC 4.0 DECO-1/CCB-1 registers */
-+    e_MODULE_ID_SEC_DECO2_CCB2,     /**< SEC 4.0 DECO-2/CCB-2 registers */
-+    e_MODULE_ID_SEC_DECO3_CCB3,     /**< SEC 4.0 DECO-3/CCB-3 registers */
-+    e_MODULE_ID_SEC_DECO4_CCB4,     /**< SEC 4.0 DECO-4/CCB-4 registers */
-+
-+    e_MODULE_ID_PIC,                /**< PIC */
-+    e_MODULE_ID_GPIO,               /**< GPIO */
-+    e_MODULE_ID_SERDES,             /**< SERDES */
-+    e_MODULE_ID_CPC_1,              /**< CoreNet-Platform-Cache 1 */
-+    e_MODULE_ID_CPC_2,              /**< CoreNet-Platform-Cache 2 */
-+
-+    e_MODULE_ID_SRIO_PORTS,         /**< RapidIO controller */
-+
-+    e_MODULE_ID_DUMMY_LAST
-+} e_ModuleId;
-+
-+#define NUM_OF_MODULES  e_MODULE_ID_DUMMY_LAST
-+
-+#if 0 /* using unified values */
-+/*****************************************************************************
-+ INTEGRATION-SPECIFIC MODULE CODES
-+******************************************************************************/
-+#define MODULE_UNKNOWN          0x00000000
-+#define MODULE_MEM              0x00010000
-+#define MODULE_MM               0x00020000
-+#define MODULE_CORE             0x00030000
-+#define MODULE_T4240            0x00040000
-+#define MODULE_T4240_PLATFORM   0x00050000
-+#define MODULE_PM               0x00060000
-+#define MODULE_MMU              0x00070000
-+#define MODULE_PIC              0x00080000
-+#define MODULE_CPC              0x00090000
-+#define MODULE_DUART            0x000a0000
-+#define MODULE_SERDES           0x000b0000
-+#define MODULE_PIO              0x000c0000
-+#define MODULE_QM               0x000d0000
-+#define MODULE_BM               0x000e0000
-+#define MODULE_SEC              0x000f0000
-+#define MODULE_LAW              0x00100000
-+#define MODULE_LBC              0x00110000
-+#define MODULE_PAMU             0x00120000
-+#define MODULE_FM               0x00130000
-+#define MODULE_FM_MURAM         0x00140000
-+#define MODULE_FM_PCD           0x00150000
-+#define MODULE_FM_RTC           0x00160000
-+#define MODULE_FM_MAC           0x00170000
-+#define MODULE_FM_PORT          0x00180000
-+#define MODULE_FM_SP            0x00190000
-+#define MODULE_DPA_PORT         0x001a0000
-+#define MODULE_MII              0x001b0000
-+#define MODULE_I2C              0x001c0000
-+#define MODULE_DMA              0x001d0000
-+#define MODULE_DDR              0x001e0000
-+#define MODULE_ESPI             0x001f0000
-+#define MODULE_DPAA_IPSEC       0x00200000
-+#endif /* using unified values */
-+
-+/*****************************************************************************
-+ PAMU INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define PAMU_NUM_OF_PARTITIONS  4
-+
-+/*****************************************************************************
-+ LAW INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define LAW_NUM_OF_WINDOWS      32
-+#define LAW_MIN_WINDOW_SIZE     0x0000000000001000LL    /**< 4 Kbytes */
-+#define LAW_MAX_WINDOW_SIZE     0x0000010000000000LL    /**< 1 Tbytes for 40-bit address space */
-+
-+
-+/*****************************************************************************
-+ LBC INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+/**************************************************************************//**
-+ @Group         lbc_exception_grp LBC Exception Unit
-+
-+ @Description   LBC Exception unit API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Anchor        lbc_exbm
-+
-+ @Collection    LBC Errors Bit Mask
-+
-+                These errors are reported through the exceptions callback..
-+                The values can be or'ed in any combination in the errors mask
-+                parameter of the errors report structure.
-+
-+                These errors can also be passed as a bit-mask to
-+                LBC_EnableErrorChecking() or LBC_DisableErrorChecking(),
-+                for enabling or disabling error checking.
-+ @{
-+*//***************************************************************************/
-+#define LBC_ERR_BUS_MONITOR     0x80000000  /**< Bus monitor error */
-+#define LBC_ERR_PARITY_ECC      0x20000000  /**< Parity error for GPCM/UPM */
-+#define LBC_ERR_WRITE_PROTECT   0x04000000  /**< Write protection error */
-+#define LBC_ERR_CHIP_SELECT     0x00080000  /**< Unrecognized chip select */
-+
-+#define LBC_ERR_ALL             (LBC_ERR_BUS_MONITOR | LBC_ERR_PARITY_ECC | \
-+                                 LBC_ERR_WRITE_PROTECT | LBC_ERR_CHIP_SELECT)
-+                                            /**< All possible errors */
-+/* @} */
-+/** @} */ /* end of lbc_exception_grp group */
-+
-+#define LBC_INCORRECT_ERROR_REPORT_ERRATA
-+
-+#define LBC_NUM_OF_BANKS            8
-+#define LBC_MAX_CS_SIZE             0x0000000100000000LL  /* Up to 4G memory block size */
-+#define LBC_PARITY_SUPPORT
-+#define LBC_ADDRESS_HOLD_TIME_CTRL
-+#define LBC_HIGH_CLK_DIVIDERS
-+#define LBC_FCM_AVAILABLE
-+
-+/*****************************************************************************
-+ GPIO INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define GPIO_PORT_OFFSET_0x1000
-+
-+#define GPIO_NUM_OF_PORTS   3   /**< Number of ports in GPIO module;
-+                                     Each port contains up to 32 I/O pins. */
-+
-+#define GPIO_VALID_PIN_MASKS   \
-+    { /* Port A */ 0xFFFFFFFF, \
-+      /* Port B */ 0xFFFFFFFF, \
-+      /* Port C */ 0xFFFFFFFF }
-+
-+#define GPIO_VALID_INTR_MASKS  \
-+    { /* Port A */ 0xFFFFFFFF, \
-+      /* Port B */ 0xFFFFFFFF, \
-+      /* Port C */ 0xFFFFFFFF }
-+
-+
-+
-+#endif /* __PART_INTEGRATION_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/FMANV3L/dpaa_integration_ext.h
-@@ -0,0 +1,293 @@
-+/*
-+ * Copyright 2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**
-+
-+ @File          dpaa_integration_ext.h
-+
-+ @Description   T4240 FM external definitions and structures.
-+*//***************************************************************************/
-+#ifndef __DPAA_INTEGRATION_EXT_H
-+#define __DPAA_INTEGRATION_EXT_H
-+
-+#include "std_ext.h"
-+
-+
-+#define DPAA_VERSION    11
-+
-+/**************************************************************************//**
-+ @Description   DPAA SW Portals Enumeration.
-+*//***************************************************************************/
-+typedef enum
-+{
-+    e_DPAA_SWPORTAL0 = 0,
-+    e_DPAA_SWPORTAL1,
-+    e_DPAA_SWPORTAL2,
-+    e_DPAA_SWPORTAL3,
-+    e_DPAA_SWPORTAL4,
-+    e_DPAA_SWPORTAL5,
-+    e_DPAA_SWPORTAL6,
-+    e_DPAA_SWPORTAL7,
-+    e_DPAA_SWPORTAL8,
-+    e_DPAA_SWPORTAL9,
-+    e_DPAA_SWPORTAL10,
-+    e_DPAA_SWPORTAL11,
-+    e_DPAA_SWPORTAL12,
-+    e_DPAA_SWPORTAL13,
-+    e_DPAA_SWPORTAL14,
-+    e_DPAA_SWPORTAL15,
-+    e_DPAA_SWPORTAL16,
-+    e_DPAA_SWPORTAL17,
-+    e_DPAA_SWPORTAL18,
-+    e_DPAA_SWPORTAL19,
-+    e_DPAA_SWPORTAL20,
-+    e_DPAA_SWPORTAL21,
-+    e_DPAA_SWPORTAL22,
-+    e_DPAA_SWPORTAL23,
-+    e_DPAA_SWPORTAL24,
-+    e_DPAA_SWPORTAL_DUMMY_LAST
-+} e_DpaaSwPortal;
-+
-+/**************************************************************************//**
-+ @Description   DPAA Direct Connect Portals Enumeration.
-+*//***************************************************************************/
-+typedef enum
-+{
-+    e_DPAA_DCPORTAL0 = 0,
-+    e_DPAA_DCPORTAL1,
-+    e_DPAA_DCPORTAL2,
-+    e_DPAA_DCPORTAL_DUMMY_LAST
-+} e_DpaaDcPortal;
-+
-+#define DPAA_MAX_NUM_OF_SW_PORTALS      e_DPAA_SWPORTAL_DUMMY_LAST
-+#define DPAA_MAX_NUM_OF_DC_PORTALS      e_DPAA_DCPORTAL_DUMMY_LAST
-+
-+/*****************************************************************************
-+ QMan INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define QM_MAX_NUM_OF_POOL_CHANNELS     15      /**< Total number of channels, dedicated and pool */
-+#define QM_MAX_NUM_OF_WQ                8       /**< Number of work queues per channel */
-+#define QM_MAX_NUM_OF_CGS               256     /**< Congestion groups number */
-+#define QM_MAX_NUM_OF_FQIDS             (16 * MEGABYTE)
-+                                                /**< FQIDs range - 24 bits */
-+
-+/**************************************************************************//**
-+ @Description   Work Queue Channel assignments in QMan.
-+*//***************************************************************************/
-+typedef enum
-+{
-+    e_QM_FQ_CHANNEL_SWPORTAL0 = 0x0,              /**< Dedicated channels serviced by software portals 0 to 24 */
-+    e_QM_FQ_CHANNEL_SWPORTAL1,
-+    e_QM_FQ_CHANNEL_SWPORTAL2,
-+    e_QM_FQ_CHANNEL_SWPORTAL3,
-+    e_QM_FQ_CHANNEL_SWPORTAL4,
-+    e_QM_FQ_CHANNEL_SWPORTAL5,
-+    e_QM_FQ_CHANNEL_SWPORTAL6,
-+    e_QM_FQ_CHANNEL_SWPORTAL7,
-+    e_QM_FQ_CHANNEL_SWPORTAL8,
-+    e_QM_FQ_CHANNEL_SWPORTAL9,
-+    e_QM_FQ_CHANNEL_SWPORTAL10,
-+    e_QM_FQ_CHANNEL_SWPORTAL11,
-+    e_QM_FQ_CHANNEL_SWPORTAL12,
-+    e_QM_FQ_CHANNEL_SWPORTAL13,
-+    e_QM_FQ_CHANNEL_SWPORTAL14,
-+    e_QM_FQ_CHANNEL_SWPORTAL15,
-+    e_QM_FQ_CHANNEL_SWPORTAL16,
-+    e_QM_FQ_CHANNEL_SWPORTAL17,
-+    e_QM_FQ_CHANNEL_SWPORTAL18,
-+    e_QM_FQ_CHANNEL_SWPORTAL19,
-+    e_QM_FQ_CHANNEL_SWPORTAL20,
-+    e_QM_FQ_CHANNEL_SWPORTAL21,
-+    e_QM_FQ_CHANNEL_SWPORTAL22,
-+    e_QM_FQ_CHANNEL_SWPORTAL23,
-+    e_QM_FQ_CHANNEL_SWPORTAL24,
-+
-+    e_QM_FQ_CHANNEL_POOL1 = 0x401,               /**< Pool channels that can be serviced by any of the software portals */
-+    e_QM_FQ_CHANNEL_POOL2,
-+    e_QM_FQ_CHANNEL_POOL3,
-+    e_QM_FQ_CHANNEL_POOL4,
-+    e_QM_FQ_CHANNEL_POOL5,
-+    e_QM_FQ_CHANNEL_POOL6,
-+    e_QM_FQ_CHANNEL_POOL7,
-+    e_QM_FQ_CHANNEL_POOL8,
-+    e_QM_FQ_CHANNEL_POOL9,
-+    e_QM_FQ_CHANNEL_POOL10,
-+    e_QM_FQ_CHANNEL_POOL11,
-+    e_QM_FQ_CHANNEL_POOL12,
-+    e_QM_FQ_CHANNEL_POOL13,
-+    e_QM_FQ_CHANNEL_POOL14,
-+    e_QM_FQ_CHANNEL_POOL15,
-+
-+    e_QM_FQ_CHANNEL_FMAN0_SP0 = 0x800,           /**< Dedicated channels serviced by Direct Connect Portal 0:
-+                                                      connected to FMan 0; assigned in incrementing order to
-+                                                      each sub-portal (SP) in the portal */
-+    e_QM_FQ_CHANNEL_FMAN0_SP1,
-+    e_QM_FQ_CHANNEL_FMAN0_SP2,
-+    e_QM_FQ_CHANNEL_FMAN0_SP3,
-+    e_QM_FQ_CHANNEL_FMAN0_SP4,
-+    e_QM_FQ_CHANNEL_FMAN0_SP5,
-+    e_QM_FQ_CHANNEL_FMAN0_SP6,
-+    e_QM_FQ_CHANNEL_FMAN0_SP7,
-+    e_QM_FQ_CHANNEL_FMAN0_SP8,
-+    e_QM_FQ_CHANNEL_FMAN0_SP9,
-+    e_QM_FQ_CHANNEL_FMAN0_SP10,
-+    e_QM_FQ_CHANNEL_FMAN0_SP11,
-+    e_QM_FQ_CHANNEL_FMAN0_SP12,
-+    e_QM_FQ_CHANNEL_FMAN0_SP13,
-+    e_QM_FQ_CHANNEL_FMAN0_SP14,
-+    e_QM_FQ_CHANNEL_FMAN0_SP15,
-+
-+    e_QM_FQ_CHANNEL_RMAN_SP0 = 0x820,            /**< Dedicated channels serviced by Direct Connect Portal 1: connected to RMan */
-+    e_QM_FQ_CHANNEL_RMAN_SP1,
-+
-+    e_QM_FQ_CHANNEL_CAAM = 0x840                 /**< Dedicated channel serviced by Direct Connect Portal 2:
-+                                                      connected to SEC */
-+} e_QmFQChannel;
-+
-+/*****************************************************************************
-+ BMan INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define BM_MAX_NUM_OF_POOLS         64          /**< Number of buffers pools */
-+
-+/*****************************************************************************
-+ SEC INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define SEC_NUM_OF_DECOS            3
-+#define SEC_ALL_DECOS_MASK          0x00000003
-+
-+
-+/*****************************************************************************
-+ FM INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define INTG_MAX_NUM_OF_FM	    1
-+/* Ports defines */
-+#define FM_MAX_NUM_OF_1G_MACS	    5
-+#define FM_MAX_NUM_OF_10G_MACS	    1
-+#define FM_MAX_NUM_OF_MACS	    (FM_MAX_NUM_OF_1G_MACS + FM_MAX_NUM_OF_10G_MACS)
-+#define FM_MAX_NUM_OF_OH_PORTS	    4
-+
-+#define FM_MAX_NUM_OF_1G_RX_PORTS   FM_MAX_NUM_OF_1G_MACS
-+#define FM_MAX_NUM_OF_10G_RX_PORTS  FM_MAX_NUM_OF_10G_MACS
-+#define FM_MAX_NUM_OF_RX_PORTS      (FM_MAX_NUM_OF_10G_RX_PORTS + FM_MAX_NUM_OF_1G_RX_PORTS)
-+
-+#define FM_MAX_NUM_OF_1G_TX_PORTS   FM_MAX_NUM_OF_1G_MACS
-+#define FM_MAX_NUM_OF_10G_TX_PORTS  FM_MAX_NUM_OF_10G_MACS
-+#define FM_MAX_NUM_OF_TX_PORTS      (FM_MAX_NUM_OF_10G_TX_PORTS + FM_MAX_NUM_OF_1G_TX_PORTS)
-+
-+#define FM_MAX_NUM_OF_MACSECS       1 /* Should be updated */
-+
-+#define FM_PORT_MAX_NUM_OF_EXT_POOLS            4           /**< Number of external BM pools per Rx port */
-+#define FM_PORT_NUM_OF_CONGESTION_GRPS          256         /**< Total number of congestion groups in QM */
-+#define FM_MAX_NUM_OF_SUB_PORTALS               16
-+#define FM_PORT_MAX_NUM_OF_OBSERVED_EXT_POOLS   0
-+
-+#define FM_VSP_MAX_NUM_OF_ENTRIES               32
-+#define FM_MAX_NUM_OF_PFC_PRIORITIES            8
-+
-+/* RAMs defines */
-+#define FM_MURAM_SIZE                   (192 * KILOBYTE)
-+#define FM_IRAM_SIZE(major, minor)      \
-+    (((major == 6) && ((minor == 4) )) ? (64 * KILOBYTE) : (32 * KILOBYTE))
-+#define FM_NUM_OF_CTRL                  2
-+
-+/* PCD defines */
-+#define FM_PCD_PLCR_NUM_ENTRIES         256                 /**< Total number of policer profiles */
-+#define FM_PCD_KG_NUM_OF_SCHEMES        32                  /**< Total number of KG schemes */
-+#define FM_PCD_MAX_NUM_OF_CLS_PLANS     256                 /**< Number of classification plan entries. */
-+#define FM_PCD_PRS_SW_PATCHES_SIZE      0x00000600          /**< Number of bytes saved for patches */
-+#define FM_PCD_SW_PRS_SIZE              0x00000800          /**< Total size of SW parser area */
-+
-+/* RTC defines */
-+#define FM_RTC_NUM_OF_ALARMS            2                   /**< RTC number of alarms */
-+#define FM_RTC_NUM_OF_PERIODIC_PULSES   3                   /**< RTC number of periodic pulses */
-+#define FM_RTC_NUM_OF_EXT_TRIGGERS      2                   /**< RTC number of external triggers */
-+
-+/* QMI defines */
-+#define QMI_MAX_NUM_OF_TNUMS            64
-+#define QMI_DEF_TNUMS_THRESH            32
-+/* FPM defines */
-+#define FM_NUM_OF_FMAN_CTRL_EVENT_REGS  4
-+
-+/* DMA defines */
-+#define DMA_THRESH_MAX_COMMQ            83
-+#define DMA_THRESH_MAX_BUF              127
-+
-+/* BMI defines */
-+#define BMI_MAX_NUM_OF_TASKS            64
-+#define BMI_MAX_NUM_OF_DMAS             32
-+
-+#define BMI_MAX_FIFO_SIZE               (FM_MURAM_SIZE)
-+#define PORT_MAX_WEIGHT                 16
-+
-+#define FM_CHECK_PORT_RESTRICTIONS(__validPorts, __newPortIndx)   TRUE
-+
-+/* Unique T4240 */
-+#define FM_OP_OPEN_DMA_MIN_LIMIT
-+#define FM_NO_RESTRICT_ON_ACCESS_RSRC
-+#define FM_NO_OP_OBSERVED_POOLS
-+#define FM_FRAME_END_PARAMS_FOR_OP
-+#define FM_DEQ_PIPELINE_PARAMS_FOR_OP
-+#define FM_QMI_NO_SINGLE_ECC_EXCEPTION
-+
-+#define FM_NO_GUARANTEED_RESET_VALUES
-+
-+/* FM errata */
-+#define FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669
-+#define FM_RX_FIFO_CORRUPT_ERRATA_10GMAC_A006320
-+#define FM_OP_NO_VSP_NO_RELEASE_ERRATA_FMAN_A006675
-+#define FM_HEAVY_TRAFFIC_SEQUENCER_HANG_ERRATA_FMAN_A006981
-+#define FM_HANG_AT_RESET_MAC_CLK_DISABLED_ERRATA_FMAN_A007273
-+
-+#define FM_BCB_ERRATA_BMI_SW001
-+#define FM_LEN_CHECK_ERRATA_FMAN_SW002
-+#define FM_AID_MODE_NO_TNUM_SW005 /* refer to pdm TKT068794 - only support of port_id on aid */
-+#define FM_ERROR_VSP_NO_MATCH_SW006 /* refer to pdm TKT174304 - no match between errorQ and VSP */
-+
-+/*****************************************************************************
-+ RMan INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define RM_MAX_NUM_OF_IB        4           /**< Number of inbound blocks */
-+#define RM_NUM_OF_IBCU          8           /**< NUmber of classification units in an inbound block */
-+
-+/* RMan erratas */
-+#define RM_ERRONEOUS_ACK_ERRATA_RMAN_A006756
-+
-+/*****************************************************************************
-+ FM MACSEC INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define NUM_OF_RX_SC                16
-+#define NUM_OF_TX_SC                16
-+
-+#define NUM_OF_SA_PER_RX_SC         2
-+#define NUM_OF_SA_PER_TX_SC         2
-+
-+#endif /* __DPAA_INTEGRATION_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/FMANV3L/part_ext.h
-@@ -0,0 +1,59 @@
-+/*
-+ * Copyright 2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**************************************************************************//**
-+
-+ @File          part_ext.h
-+
-+ @Description   Definitions for the part (integration) module.
-+*//***************************************************************************/
-+
-+#ifndef __PART_EXT_H
-+#define __PART_EXT_H
-+
-+#include "std_ext.h"
-+#include "part_integration_ext.h"
-+
-+/**************************************************************************//*
-+ @Description   Part data structure - must be contained in any integration
-+                data structure.
-+*//***************************************************************************/
-+typedef struct t_Part
-+{
-+    uintptr_t   (* f_GetModuleBase)(t_Handle h_Part, e_ModuleId moduleId);
-+                /**< Returns the address of the module's memory map base. */
-+    e_ModuleId  (* f_GetModuleIdByBase)(t_Handle h_Part, uintptr_t baseAddress);
-+                /**< Returns the module's ID according to its memory map base. */
-+} t_Part;
-+
-+
-+#endif /* __PART_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/FMANV3L/part_integration_ext.h
-@@ -0,0 +1,304 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**
-+
-+ @File          part_integration_ext.h
-+
-+ @Description   T4240 external definitions and structures.
-+*//***************************************************************************/
-+#ifndef __PART_INTEGRATION_EXT_H
-+#define __PART_INTEGRATION_EXT_H
-+
-+#include "std_ext.h"
-+#include "ddr_std_ext.h"
-+#include "enet_ext.h"
-+#include "dpaa_integration_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         T4240_chip_id T4240 Application Programming Interface
-+
-+ @Description   T4240 Chip functions,definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+#define CORE_E6500
-+
-+#define INTG_MAX_NUM_OF_CORES   24
-+
-+
-+/**************************************************************************//**
-+ @Description   Module types.
-+*//***************************************************************************/
-+typedef enum e_ModuleId
-+{
-+    e_MODULE_ID_DUART_1 = 0,
-+    e_MODULE_ID_DUART_2,
-+    e_MODULE_ID_DUART_3,
-+    e_MODULE_ID_DUART_4,
-+    e_MODULE_ID_LAW,
-+    e_MODULE_ID_IFC,
-+    e_MODULE_ID_PAMU,
-+    e_MODULE_ID_QM,                 /**< Queue manager module */
-+    e_MODULE_ID_BM,                 /**< Buffer manager module */
-+    e_MODULE_ID_QM_CE_PORTAL_0,
-+    e_MODULE_ID_QM_CI_PORTAL_0,
-+    e_MODULE_ID_QM_CE_PORTAL_1,
-+    e_MODULE_ID_QM_CI_PORTAL_1,
-+    e_MODULE_ID_QM_CE_PORTAL_2,
-+    e_MODULE_ID_QM_CI_PORTAL_2,
-+    e_MODULE_ID_QM_CE_PORTAL_3,
-+    e_MODULE_ID_QM_CI_PORTAL_3,
-+    e_MODULE_ID_QM_CE_PORTAL_4,
-+    e_MODULE_ID_QM_CI_PORTAL_4,
-+    e_MODULE_ID_QM_CE_PORTAL_5,
-+    e_MODULE_ID_QM_CI_PORTAL_5,
-+    e_MODULE_ID_QM_CE_PORTAL_6,
-+    e_MODULE_ID_QM_CI_PORTAL_6,
-+    e_MODULE_ID_QM_CE_PORTAL_7,
-+    e_MODULE_ID_QM_CI_PORTAL_7,
-+    e_MODULE_ID_QM_CE_PORTAL_8,
-+    e_MODULE_ID_QM_CI_PORTAL_8,
-+    e_MODULE_ID_QM_CE_PORTAL_9,
-+    e_MODULE_ID_QM_CI_PORTAL_9,
-+    e_MODULE_ID_BM_CE_PORTAL_0,
-+    e_MODULE_ID_BM_CI_PORTAL_0,
-+    e_MODULE_ID_BM_CE_PORTAL_1,
-+    e_MODULE_ID_BM_CI_PORTAL_1,
-+    e_MODULE_ID_BM_CE_PORTAL_2,
-+    e_MODULE_ID_BM_CI_PORTAL_2,
-+    e_MODULE_ID_BM_CE_PORTAL_3,
-+    e_MODULE_ID_BM_CI_PORTAL_3,
-+    e_MODULE_ID_BM_CE_PORTAL_4,
-+    e_MODULE_ID_BM_CI_PORTAL_4,
-+    e_MODULE_ID_BM_CE_PORTAL_5,
-+    e_MODULE_ID_BM_CI_PORTAL_5,
-+    e_MODULE_ID_BM_CE_PORTAL_6,
-+    e_MODULE_ID_BM_CI_PORTAL_6,
-+    e_MODULE_ID_BM_CE_PORTAL_7,
-+    e_MODULE_ID_BM_CI_PORTAL_7,
-+    e_MODULE_ID_BM_CE_PORTAL_8,
-+    e_MODULE_ID_BM_CI_PORTAL_8,
-+    e_MODULE_ID_BM_CE_PORTAL_9,
-+    e_MODULE_ID_BM_CI_PORTAL_9,
-+    e_MODULE_ID_FM,                 /**< Frame manager module */
-+    e_MODULE_ID_FM_RTC,             /**< FM Real-Time-Clock */
-+    e_MODULE_ID_FM_MURAM,           /**< FM Multi-User-RAM */
-+    e_MODULE_ID_FM_BMI,             /**< FM BMI block */
-+    e_MODULE_ID_FM_QMI,             /**< FM QMI block */
-+    e_MODULE_ID_FM_PARSER,          /**< FM parser block */
-+    e_MODULE_ID_FM_PORT_HO1,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO2,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO3,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO4,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO5,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO6,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO7,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_1GRx1,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx2,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx3,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx4,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx5,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx6,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_10GRx1,     /**< FM Rx 10G MAC port block */
-+    e_MODULE_ID_FM_PORT_10GRx2,     /**< FM Rx 10G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx1,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx2,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx3,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx4,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx5,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx6,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_10GTx1,     /**< FM Tx 10G MAC port block */
-+    e_MODULE_ID_FM_PORT_10GTx2,     /**< FM Tx 10G MAC port block */
-+    e_MODULE_ID_FM_PLCR,            /**< FM Policer */
-+    e_MODULE_ID_FM_KG,              /**< FM Keygen */
-+    e_MODULE_ID_FM_DMA,             /**< FM DMA */
-+    e_MODULE_ID_FM_FPM,             /**< FM FPM */
-+    e_MODULE_ID_FM_IRAM,            /**< FM Instruction-RAM */
-+    e_MODULE_ID_FM_1GMDIO,          /**< FM 1G MDIO MAC */
-+    e_MODULE_ID_FM_10GMDIO,         /**< FM 10G MDIO */
-+    e_MODULE_ID_FM_PRS_IRAM,        /**< FM SW-parser Instruction-RAM */
-+    e_MODULE_ID_FM_1GMAC1,          /**< FM 1G MAC #1 */
-+    e_MODULE_ID_FM_1GMAC2,          /**< FM 1G MAC #2 */
-+    e_MODULE_ID_FM_1GMAC3,          /**< FM 1G MAC #3 */
-+    e_MODULE_ID_FM_1GMAC4,          /**< FM 1G MAC #4 */
-+    e_MODULE_ID_FM_1GMAC5,          /**< FM 1G MAC #5 */
-+    e_MODULE_ID_FM_1GMAC6,          /**< FM 1G MAC #6 */
-+    e_MODULE_ID_FM_10GMAC1,         /**< FM 10G MAC */
-+    e_MODULE_ID_FM_10GMAC2,         /**< FM 10G MAC */
-+
-+    e_MODULE_ID_SEC_GEN,            /**< SEC 4.0 General registers      */
-+    e_MODULE_ID_SEC_QI,             /**< SEC 4.0 QI registers           */
-+    e_MODULE_ID_SEC_JQ0,            /**< SEC 4.0 JQ-0 registers         */
-+    e_MODULE_ID_SEC_JQ1,            /**< SEC 4.0 JQ-1 registers         */
-+    e_MODULE_ID_SEC_JQ2,            /**< SEC 4.0 JQ-2 registers         */
-+    e_MODULE_ID_SEC_JQ3,            /**< SEC 4.0 JQ-3 registers         */
-+    e_MODULE_ID_SEC_RTIC,           /**< SEC 4.0 RTIC registers         */
-+    e_MODULE_ID_SEC_DECO0_CCB0,     /**< SEC 4.0 DECO-0/CCB-0 registers */
-+    e_MODULE_ID_SEC_DECO1_CCB1,     /**< SEC 4.0 DECO-1/CCB-1 registers */
-+    e_MODULE_ID_SEC_DECO2_CCB2,     /**< SEC 4.0 DECO-2/CCB-2 registers */
-+    e_MODULE_ID_SEC_DECO3_CCB3,     /**< SEC 4.0 DECO-3/CCB-3 registers */
-+    e_MODULE_ID_SEC_DECO4_CCB4,     /**< SEC 4.0 DECO-4/CCB-4 registers */
-+
-+    e_MODULE_ID_PIC,                /**< PIC */
-+    e_MODULE_ID_GPIO,               /**< GPIO */
-+    e_MODULE_ID_SERDES,             /**< SERDES */
-+    e_MODULE_ID_CPC_1,              /**< CoreNet-Platform-Cache 1 */
-+    e_MODULE_ID_CPC_2,              /**< CoreNet-Platform-Cache 2 */
-+
-+    e_MODULE_ID_SRIO_PORTS,         /**< RapidIO controller */
-+
-+    e_MODULE_ID_DUMMY_LAST
-+} e_ModuleId;
-+
-+#define NUM_OF_MODULES  e_MODULE_ID_DUMMY_LAST
-+
-+#if 0 /* using unified values */
-+/*****************************************************************************
-+ INTEGRATION-SPECIFIC MODULE CODES
-+******************************************************************************/
-+#define MODULE_UNKNOWN          0x00000000
-+#define MODULE_MEM              0x00010000
-+#define MODULE_MM               0x00020000
-+#define MODULE_CORE             0x00030000
-+#define MODULE_T4240            0x00040000
-+#define MODULE_T4240_PLATFORM   0x00050000
-+#define MODULE_PM               0x00060000
-+#define MODULE_MMU              0x00070000
-+#define MODULE_PIC              0x00080000
-+#define MODULE_CPC              0x00090000
-+#define MODULE_DUART            0x000a0000
-+#define MODULE_SERDES           0x000b0000
-+#define MODULE_PIO              0x000c0000
-+#define MODULE_QM               0x000d0000
-+#define MODULE_BM               0x000e0000
-+#define MODULE_SEC              0x000f0000
-+#define MODULE_LAW              0x00100000
-+#define MODULE_LBC              0x00110000
-+#define MODULE_PAMU             0x00120000
-+#define MODULE_FM               0x00130000
-+#define MODULE_FM_MURAM         0x00140000
-+#define MODULE_FM_PCD           0x00150000
-+#define MODULE_FM_RTC           0x00160000
-+#define MODULE_FM_MAC           0x00170000
-+#define MODULE_FM_PORT          0x00180000
-+#define MODULE_FM_SP            0x00190000
-+#define MODULE_DPA_PORT         0x001a0000
-+#define MODULE_MII              0x001b0000
-+#define MODULE_I2C              0x001c0000
-+#define MODULE_DMA              0x001d0000
-+#define MODULE_DDR              0x001e0000
-+#define MODULE_ESPI             0x001f0000
-+#define MODULE_DPAA_IPSEC       0x00200000
-+#endif /* using unified values */
-+
-+/*****************************************************************************
-+ PAMU INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define PAMU_NUM_OF_PARTITIONS  4
-+
-+/*****************************************************************************
-+ LAW INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define LAW_NUM_OF_WINDOWS      32
-+#define LAW_MIN_WINDOW_SIZE     0x0000000000001000LL    /**< 4 Kbytes */
-+#define LAW_MAX_WINDOW_SIZE     0x0000010000000000LL    /**< 1 Tbytes for 40-bit address space */
-+
-+
-+/*****************************************************************************
-+ LBC INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+/**************************************************************************//**
-+ @Group         lbc_exception_grp LBC Exception Unit
-+
-+ @Description   LBC Exception unit API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Anchor        lbc_exbm
-+
-+ @Collection    LBC Errors Bit Mask
-+
-+                These errors are reported through the exceptions callback..
-+                The values can be or'ed in any combination in the errors mask
-+                parameter of the errors report structure.
-+
-+                These errors can also be passed as a bit-mask to
-+                LBC_EnableErrorChecking() or LBC_DisableErrorChecking(),
-+                for enabling or disabling error checking.
-+ @{
-+*//***************************************************************************/
-+#define LBC_ERR_BUS_MONITOR     0x80000000  /**< Bus monitor error */
-+#define LBC_ERR_PARITY_ECC      0x20000000  /**< Parity error for GPCM/UPM */
-+#define LBC_ERR_WRITE_PROTECT   0x04000000  /**< Write protection error */
-+#define LBC_ERR_CHIP_SELECT     0x00080000  /**< Unrecognized chip select */
-+
-+#define LBC_ERR_ALL             (LBC_ERR_BUS_MONITOR | LBC_ERR_PARITY_ECC | \
-+                                 LBC_ERR_WRITE_PROTECT | LBC_ERR_CHIP_SELECT)
-+                                            /**< All possible errors */
-+/* @} */
-+/** @} */ /* end of lbc_exception_grp group */
-+
-+#define LBC_INCORRECT_ERROR_REPORT_ERRATA
-+
-+#define LBC_NUM_OF_BANKS            8
-+#define LBC_MAX_CS_SIZE             0x0000000100000000LL  /* Up to 4G memory block size */
-+#define LBC_PARITY_SUPPORT
-+#define LBC_ADDRESS_HOLD_TIME_CTRL
-+#define LBC_HIGH_CLK_DIVIDERS
-+#define LBC_FCM_AVAILABLE
-+
-+/*****************************************************************************
-+ GPIO INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define GPIO_PORT_OFFSET_0x1000
-+
-+#define GPIO_NUM_OF_PORTS   3   /**< Number of ports in GPIO module;
-+                                     Each port contains up to 32 I/O pins. */
-+
-+#define GPIO_VALID_PIN_MASKS   \
-+    { /* Port A */ 0xFFFFFFFF, \
-+      /* Port B */ 0xFFFFFFFF, \
-+      /* Port C */ 0xFFFFFFFF }
-+
-+#define GPIO_VALID_INTR_MASKS  \
-+    { /* Port A */ 0xFFFFFFFF, \
-+      /* Port B */ 0xFFFFFFFF, \
-+      /* Port C */ 0xFFFFFFFF }
-+
-+
-+
-+#endif /* __PART_INTEGRATION_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/LS1043/dpaa_integration_ext.h
-@@ -0,0 +1,291 @@
-+/*
-+ * Copyright 2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**
-+
-+ @File          dpaa_integration_ext.h
-+
-+ @Description   T4240 FM external definitions and structures.
-+*//***************************************************************************/
-+#ifndef __DPAA_INTEGRATION_EXT_H
-+#define __DPAA_INTEGRATION_EXT_H
-+
-+#include "std_ext.h"
-+
-+
-+#define DPAA_VERSION    11
-+
-+/**************************************************************************//**
-+ @Description   DPAA SW Portals Enumeration.
-+*//***************************************************************************/
-+typedef enum
-+{
-+    e_DPAA_SWPORTAL0 = 0,
-+    e_DPAA_SWPORTAL1,
-+    e_DPAA_SWPORTAL2,
-+    e_DPAA_SWPORTAL3,
-+    e_DPAA_SWPORTAL4,
-+    e_DPAA_SWPORTAL5,
-+    e_DPAA_SWPORTAL6,
-+    e_DPAA_SWPORTAL7,
-+    e_DPAA_SWPORTAL8,
-+    e_DPAA_SWPORTAL9,
-+    e_DPAA_SWPORTAL10,
-+    e_DPAA_SWPORTAL11,
-+    e_DPAA_SWPORTAL12,
-+    e_DPAA_SWPORTAL13,
-+    e_DPAA_SWPORTAL14,
-+    e_DPAA_SWPORTAL15,
-+    e_DPAA_SWPORTAL16,
-+    e_DPAA_SWPORTAL17,
-+    e_DPAA_SWPORTAL18,
-+    e_DPAA_SWPORTAL19,
-+    e_DPAA_SWPORTAL20,
-+    e_DPAA_SWPORTAL21,
-+    e_DPAA_SWPORTAL22,
-+    e_DPAA_SWPORTAL23,
-+    e_DPAA_SWPORTAL24,
-+    e_DPAA_SWPORTAL_DUMMY_LAST
-+} e_DpaaSwPortal;
-+
-+/**************************************************************************//**
-+ @Description   DPAA Direct Connect Portals Enumeration.
-+*//***************************************************************************/
-+typedef enum
-+{
-+    e_DPAA_DCPORTAL0 = 0,
-+    e_DPAA_DCPORTAL1,
-+    e_DPAA_DCPORTAL2,
-+    e_DPAA_DCPORTAL_DUMMY_LAST
-+} e_DpaaDcPortal;
-+
-+#define DPAA_MAX_NUM_OF_SW_PORTALS      e_DPAA_SWPORTAL_DUMMY_LAST
-+#define DPAA_MAX_NUM_OF_DC_PORTALS      e_DPAA_DCPORTAL_DUMMY_LAST
-+
-+/*****************************************************************************
-+ QMan INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define QM_MAX_NUM_OF_POOL_CHANNELS     15      /**< Total number of channels, dedicated and pool */
-+#define QM_MAX_NUM_OF_WQ                8       /**< Number of work queues per channel */
-+#define QM_MAX_NUM_OF_CGS               256     /**< Congestion groups number */
-+#define QM_MAX_NUM_OF_FQIDS             (16 * MEGABYTE)
-+                                                /**< FQIDs range - 24 bits */
-+
-+/**************************************************************************//**
-+ @Description   Work Queue Channel assignments in QMan.
-+*//***************************************************************************/
-+typedef enum
-+{
-+    e_QM_FQ_CHANNEL_SWPORTAL0 = 0x0,              /**< Dedicated channels serviced by software portals 0 to 24 */
-+    e_QM_FQ_CHANNEL_SWPORTAL1,
-+    e_QM_FQ_CHANNEL_SWPORTAL2,
-+    e_QM_FQ_CHANNEL_SWPORTAL3,
-+    e_QM_FQ_CHANNEL_SWPORTAL4,
-+    e_QM_FQ_CHANNEL_SWPORTAL5,
-+    e_QM_FQ_CHANNEL_SWPORTAL6,
-+    e_QM_FQ_CHANNEL_SWPORTAL7,
-+    e_QM_FQ_CHANNEL_SWPORTAL8,
-+    e_QM_FQ_CHANNEL_SWPORTAL9,
-+    e_QM_FQ_CHANNEL_SWPORTAL10,
-+    e_QM_FQ_CHANNEL_SWPORTAL11,
-+    e_QM_FQ_CHANNEL_SWPORTAL12,
-+    e_QM_FQ_CHANNEL_SWPORTAL13,
-+    e_QM_FQ_CHANNEL_SWPORTAL14,
-+    e_QM_FQ_CHANNEL_SWPORTAL15,
-+    e_QM_FQ_CHANNEL_SWPORTAL16,
-+    e_QM_FQ_CHANNEL_SWPORTAL17,
-+    e_QM_FQ_CHANNEL_SWPORTAL18,
-+    e_QM_FQ_CHANNEL_SWPORTAL19,
-+    e_QM_FQ_CHANNEL_SWPORTAL20,
-+    e_QM_FQ_CHANNEL_SWPORTAL21,
-+    e_QM_FQ_CHANNEL_SWPORTAL22,
-+    e_QM_FQ_CHANNEL_SWPORTAL23,
-+    e_QM_FQ_CHANNEL_SWPORTAL24,
-+
-+    e_QM_FQ_CHANNEL_POOL1 = 0x401,               /**< Pool channels that can be serviced by any of the software portals */
-+    e_QM_FQ_CHANNEL_POOL2,
-+    e_QM_FQ_CHANNEL_POOL3,
-+    e_QM_FQ_CHANNEL_POOL4,
-+    e_QM_FQ_CHANNEL_POOL5,
-+    e_QM_FQ_CHANNEL_POOL6,
-+    e_QM_FQ_CHANNEL_POOL7,
-+    e_QM_FQ_CHANNEL_POOL8,
-+    e_QM_FQ_CHANNEL_POOL9,
-+    e_QM_FQ_CHANNEL_POOL10,
-+    e_QM_FQ_CHANNEL_POOL11,
-+    e_QM_FQ_CHANNEL_POOL12,
-+    e_QM_FQ_CHANNEL_POOL13,
-+    e_QM_FQ_CHANNEL_POOL14,
-+    e_QM_FQ_CHANNEL_POOL15,
-+
-+    e_QM_FQ_CHANNEL_FMAN0_SP0 = 0x800,           /**< Dedicated channels serviced by Direct Connect Portal 0:
-+                                                      connected to FMan 0; assigned in incrementing order to
-+                                                      each sub-portal (SP) in the portal */
-+    e_QM_FQ_CHANNEL_FMAN0_SP1,
-+    e_QM_FQ_CHANNEL_FMAN0_SP2,
-+    e_QM_FQ_CHANNEL_FMAN0_SP3,
-+    e_QM_FQ_CHANNEL_FMAN0_SP4,
-+    e_QM_FQ_CHANNEL_FMAN0_SP5,
-+    e_QM_FQ_CHANNEL_FMAN0_SP6,
-+    e_QM_FQ_CHANNEL_FMAN0_SP7,
-+    e_QM_FQ_CHANNEL_FMAN0_SP8,
-+    e_QM_FQ_CHANNEL_FMAN0_SP9,
-+    e_QM_FQ_CHANNEL_FMAN0_SP10,
-+    e_QM_FQ_CHANNEL_FMAN0_SP11,
-+    e_QM_FQ_CHANNEL_FMAN0_SP12,
-+    e_QM_FQ_CHANNEL_FMAN0_SP13,
-+    e_QM_FQ_CHANNEL_FMAN0_SP14,
-+    e_QM_FQ_CHANNEL_FMAN0_SP15,
-+
-+    e_QM_FQ_CHANNEL_RMAN_SP0 = 0x820,            /**< Dedicated channels serviced by Direct Connect Portal 1: connected to RMan */
-+    e_QM_FQ_CHANNEL_RMAN_SP1,
-+
-+    e_QM_FQ_CHANNEL_CAAM = 0x840                 /**< Dedicated channel serviced by Direct Connect Portal 2:
-+                                                      connected to SEC */
-+} e_QmFQChannel;
-+
-+/*****************************************************************************
-+ BMan INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define BM_MAX_NUM_OF_POOLS         64          /**< Number of buffers pools */
-+
-+/*****************************************************************************
-+ SEC INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define SEC_NUM_OF_DECOS            3
-+#define SEC_ALL_DECOS_MASK          0x00000003
-+
-+
-+/*****************************************************************************
-+ FM INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define INTG_MAX_NUM_OF_FM          2
-+
-+/* Ports defines */
-+#define FM_MAX_NUM_OF_1G_MACS       6
-+#define FM_MAX_NUM_OF_10G_MACS      2
-+#define FM_MAX_NUM_OF_MACS          (FM_MAX_NUM_OF_1G_MACS + FM_MAX_NUM_OF_10G_MACS)
-+#define FM_MAX_NUM_OF_OH_PORTS      6
-+
-+#define FM_MAX_NUM_OF_1G_RX_PORTS   FM_MAX_NUM_OF_1G_MACS
-+#define FM_MAX_NUM_OF_10G_RX_PORTS  FM_MAX_NUM_OF_10G_MACS
-+#define FM_MAX_NUM_OF_RX_PORTS      (FM_MAX_NUM_OF_10G_RX_PORTS + FM_MAX_NUM_OF_1G_RX_PORTS)
-+
-+#define FM_MAX_NUM_OF_1G_TX_PORTS   FM_MAX_NUM_OF_1G_MACS
-+#define FM_MAX_NUM_OF_10G_TX_PORTS  FM_MAX_NUM_OF_10G_MACS
-+#define FM_MAX_NUM_OF_TX_PORTS      (FM_MAX_NUM_OF_10G_TX_PORTS + FM_MAX_NUM_OF_1G_TX_PORTS)
-+
-+#define FM_PORT_MAX_NUM_OF_EXT_POOLS            4           /**< Number of external BM pools per Rx port */
-+#define FM_PORT_NUM_OF_CONGESTION_GRPS          256         /**< Total number of congestion groups in QM */
-+#define FM_MAX_NUM_OF_SUB_PORTALS               16
-+#define FM_PORT_MAX_NUM_OF_OBSERVED_EXT_POOLS   0
-+
-+#define FM_VSP_MAX_NUM_OF_ENTRIES               64
-+#define FM_MAX_NUM_OF_PFC_PRIORITIES            8
-+
-+/* RAMs defines */
-+#define FM_MURAM_SIZE                   (384 * KILOBYTE)
-+#define FM_IRAM_SIZE(major, minor)      (64 * KILOBYTE)
-+#define FM_NUM_OF_CTRL                  4
-+
-+/* PCD defines */
-+#define FM_PCD_PLCR_NUM_ENTRIES         256                 /**< Total number of policer profiles */
-+#define FM_PCD_KG_NUM_OF_SCHEMES        32                  /**< Total number of KG schemes */
-+#define FM_PCD_MAX_NUM_OF_CLS_PLANS     256                 /**< Number of classification plan entries. */
-+#define FM_PCD_PRS_SW_PATCHES_SIZE      0x00000600          /**< Number of bytes saved for patches */
-+#define FM_PCD_SW_PRS_SIZE              0x00000800          /**< Total size of SW parser area */
-+
-+/* RTC defines */
-+#define FM_RTC_NUM_OF_ALARMS            2                   /**< RTC number of alarms */
-+#define FM_RTC_NUM_OF_PERIODIC_PULSES   3                   /**< RTC number of periodic pulses */
-+#define FM_RTC_NUM_OF_EXT_TRIGGERS      2                   /**< RTC number of external triggers */
-+
-+/* QMI defines */
-+#define QMI_MAX_NUM_OF_TNUMS            64
-+#define QMI_DEF_TNUMS_THRESH            32
-+/* FPM defines */
-+#define FM_NUM_OF_FMAN_CTRL_EVENT_REGS  4
-+
-+/* DMA defines */
-+#define DMA_THRESH_MAX_COMMQ            83
-+#define DMA_THRESH_MAX_BUF              127
-+
-+/* BMI defines */
-+#define BMI_MAX_NUM_OF_TASKS            128
-+#define BMI_MAX_NUM_OF_DMAS             84
-+
-+#define BMI_MAX_FIFO_SIZE               (FM_MURAM_SIZE)
-+#define PORT_MAX_WEIGHT                 16
-+
-+#define FM_CHECK_PORT_RESTRICTIONS(__validPorts, __newPortIndx)   TRUE
-+
-+/* Unique T4240 */
-+#define FM_OP_OPEN_DMA_MIN_LIMIT
-+#define FM_NO_RESTRICT_ON_ACCESS_RSRC
-+#define FM_NO_OP_OBSERVED_POOLS
-+#define FM_FRAME_END_PARAMS_FOR_OP
-+#define FM_DEQ_PIPELINE_PARAMS_FOR_OP
-+#define FM_QMI_NO_SINGLE_ECC_EXCEPTION
-+
-+#define FM_NO_GUARANTEED_RESET_VALUES
-+
-+/* FM errata */
-+#define FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669
-+#define FM_WRONG_RESET_VALUES_ERRATA_FMAN_A005127
-+#define FM_RX_FIFO_CORRUPT_ERRATA_10GMAC_A006320
-+#define FM_OP_NO_VSP_NO_RELEASE_ERRATA_FMAN_A006675
-+#define FM_HEAVY_TRAFFIC_SEQUENCER_HANG_ERRATA_FMAN_A006981
-+
-+#define FM_BCB_ERRATA_BMI_SW001
-+#define FM_LEN_CHECK_ERRATA_FMAN_SW002
-+#define FM_AID_MODE_NO_TNUM_SW005 /* refer to pdm TKT068794 - only support of port_id on aid */
-+#define FM_ERROR_VSP_NO_MATCH_SW006 /* refer to pdm TKT174304 - no match between errorQ and VSP */
-+
-+/*****************************************************************************
-+ RMan INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define RM_MAX_NUM_OF_IB        4           /**< Number of inbound blocks */
-+#define RM_NUM_OF_IBCU          8           /**< NUmber of classification units in an inbound block */
-+
-+/* RMan erratas */
-+#define RM_ERRONEOUS_ACK_ERRATA_RMAN_A006756
-+
-+/*****************************************************************************
-+ FM MACSEC INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define NUM_OF_RX_SC                16
-+#define NUM_OF_TX_SC                16
-+
-+#define NUM_OF_SA_PER_RX_SC         2
-+#define NUM_OF_SA_PER_TX_SC         2
-+
-+#endif /* __DPAA_INTEGRATION_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/LS1043/part_ext.h
-@@ -0,0 +1,64 @@
-+/*
-+ * Copyright 2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**************************************************************************//**
-+
-+ @File          part_ext.h
-+
-+ @Description   Definitions for the part (integration) module.
-+*//***************************************************************************/
-+
-+#ifndef __PART_EXT_H
-+#define __PART_EXT_H
-+
-+#include "std_ext.h"
-+#include "part_integration_ext.h"
-+
-+#if !(defined(LS1043))
-+#error "unable to proceed without chip-definition"
-+#endif
-+
-+
-+/**************************************************************************//*
-+ @Description   Part data structure - must be contained in any integration
-+                data structure.
-+*//***************************************************************************/
-+typedef struct t_Part
-+{
-+    uintptr_t   (* f_GetModuleBase)(t_Handle h_Part, e_ModuleId moduleId);
-+                /**< Returns the address of the module's memory map base. */
-+    e_ModuleId  (* f_GetModuleIdByBase)(t_Handle h_Part, uintptr_t baseAddress);
-+                /**< Returns the module's ID according to its memory map base. */
-+} t_Part;
-+
-+
-+#endif /* __PART_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/LS1043/part_integration_ext.h
-@@ -0,0 +1,185 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**
-+
-+ @File          part_integration_ext.h
-+
-+ @Description   T4240 external definitions and structures.
-+*//***************************************************************************/
-+#ifndef __PART_INTEGRATION_EXT_H
-+#define __PART_INTEGRATION_EXT_H
-+
-+#include "std_ext.h"
-+#include "ddr_std_ext.h"
-+#include "enet_ext.h"
-+#include "dpaa_integration_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         T4240_chip_id T4240 Application Programming Interface
-+
-+ @Description   T4240 Chip functions,definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+#define INTG_MAX_NUM_OF_CORES   4
-+
-+/**************************************************************************//**
-+ @Description   Module types.
-+*//***************************************************************************/
-+typedef enum e_ModuleId
-+{
-+    e_MODULE_ID_DUART_1 = 0,
-+    e_MODULE_ID_DUART_2,
-+    e_MODULE_ID_DUART_3,
-+    e_MODULE_ID_DUART_4,
-+    e_MODULE_ID_LAW,
-+    e_MODULE_ID_IFC,
-+    e_MODULE_ID_PAMU,
-+    e_MODULE_ID_QM,                 /**< Queue manager module */
-+    e_MODULE_ID_BM,                 /**< Buffer manager module */
-+    e_MODULE_ID_QM_CE_PORTAL_0,
-+    e_MODULE_ID_QM_CI_PORTAL_0,
-+    e_MODULE_ID_QM_CE_PORTAL_1,
-+    e_MODULE_ID_QM_CI_PORTAL_1,
-+    e_MODULE_ID_QM_CE_PORTAL_2,
-+    e_MODULE_ID_QM_CI_PORTAL_2,
-+    e_MODULE_ID_QM_CE_PORTAL_3,
-+    e_MODULE_ID_QM_CI_PORTAL_3,
-+    e_MODULE_ID_QM_CE_PORTAL_4,
-+    e_MODULE_ID_QM_CI_PORTAL_4,
-+    e_MODULE_ID_QM_CE_PORTAL_5,
-+    e_MODULE_ID_QM_CI_PORTAL_5,
-+    e_MODULE_ID_QM_CE_PORTAL_6,
-+    e_MODULE_ID_QM_CI_PORTAL_6,
-+    e_MODULE_ID_QM_CE_PORTAL_7,
-+    e_MODULE_ID_QM_CI_PORTAL_7,
-+    e_MODULE_ID_QM_CE_PORTAL_8,
-+    e_MODULE_ID_QM_CI_PORTAL_8,
-+    e_MODULE_ID_QM_CE_PORTAL_9,
-+    e_MODULE_ID_QM_CI_PORTAL_9,
-+    e_MODULE_ID_BM_CE_PORTAL_0,
-+    e_MODULE_ID_BM_CI_PORTAL_0,
-+    e_MODULE_ID_BM_CE_PORTAL_1,
-+    e_MODULE_ID_BM_CI_PORTAL_1,
-+    e_MODULE_ID_BM_CE_PORTAL_2,
-+    e_MODULE_ID_BM_CI_PORTAL_2,
-+    e_MODULE_ID_BM_CE_PORTAL_3,
-+    e_MODULE_ID_BM_CI_PORTAL_3,
-+    e_MODULE_ID_BM_CE_PORTAL_4,
-+    e_MODULE_ID_BM_CI_PORTAL_4,
-+    e_MODULE_ID_BM_CE_PORTAL_5,
-+    e_MODULE_ID_BM_CI_PORTAL_5,
-+    e_MODULE_ID_BM_CE_PORTAL_6,
-+    e_MODULE_ID_BM_CI_PORTAL_6,
-+    e_MODULE_ID_BM_CE_PORTAL_7,
-+    e_MODULE_ID_BM_CI_PORTAL_7,
-+    e_MODULE_ID_BM_CE_PORTAL_8,
-+    e_MODULE_ID_BM_CI_PORTAL_8,
-+    e_MODULE_ID_BM_CE_PORTAL_9,
-+    e_MODULE_ID_BM_CI_PORTAL_9,
-+    e_MODULE_ID_FM,                 /**< Frame manager module */
-+    e_MODULE_ID_FM_RTC,             /**< FM Real-Time-Clock */
-+    e_MODULE_ID_FM_MURAM,           /**< FM Multi-User-RAM */
-+    e_MODULE_ID_FM_BMI,             /**< FM BMI block */
-+    e_MODULE_ID_FM_QMI,             /**< FM QMI block */
-+    e_MODULE_ID_FM_PARSER,          /**< FM parser block */
-+    e_MODULE_ID_FM_PORT_HO1,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO2,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO3,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO4,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO5,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO6,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO7,        /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_1GRx1,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx2,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx3,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx4,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx5,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx6,      /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_10GRx1,     /**< FM Rx 10G MAC port block */
-+    e_MODULE_ID_FM_PORT_10GRx2,     /**< FM Rx 10G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx1,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx2,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx3,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx4,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx5,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx6,      /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_10GTx1,     /**< FM Tx 10G MAC port block */
-+    e_MODULE_ID_FM_PORT_10GTx2,     /**< FM Tx 10G MAC port block */
-+    e_MODULE_ID_FM_PLCR,            /**< FM Policer */
-+    e_MODULE_ID_FM_KG,              /**< FM Keygen */
-+    e_MODULE_ID_FM_DMA,             /**< FM DMA */
-+    e_MODULE_ID_FM_FPM,             /**< FM FPM */
-+    e_MODULE_ID_FM_IRAM,            /**< FM Instruction-RAM */
-+    e_MODULE_ID_FM_1GMDIO,          /**< FM 1G MDIO MAC */
-+    e_MODULE_ID_FM_10GMDIO,         /**< FM 10G MDIO */
-+    e_MODULE_ID_FM_PRS_IRAM,        /**< FM SW-parser Instruction-RAM */
-+    e_MODULE_ID_FM_1GMAC1,          /**< FM 1G MAC #1 */
-+    e_MODULE_ID_FM_1GMAC2,          /**< FM 1G MAC #2 */
-+    e_MODULE_ID_FM_1GMAC3,          /**< FM 1G MAC #3 */
-+    e_MODULE_ID_FM_1GMAC4,          /**< FM 1G MAC #4 */
-+    e_MODULE_ID_FM_1GMAC5,          /**< FM 1G MAC #5 */
-+    e_MODULE_ID_FM_1GMAC6,          /**< FM 1G MAC #6 */
-+    e_MODULE_ID_FM_10GMAC1,         /**< FM 10G MAC */
-+    e_MODULE_ID_FM_10GMAC2,         /**< FM 10G MAC */
-+
-+    e_MODULE_ID_SEC_GEN,            /**< SEC 4.0 General registers      */
-+    e_MODULE_ID_SEC_QI,             /**< SEC 4.0 QI registers           */
-+    e_MODULE_ID_SEC_JQ0,            /**< SEC 4.0 JQ-0 registers         */
-+    e_MODULE_ID_SEC_JQ1,            /**< SEC 4.0 JQ-1 registers         */
-+    e_MODULE_ID_SEC_JQ2,            /**< SEC 4.0 JQ-2 registers         */
-+    e_MODULE_ID_SEC_JQ3,            /**< SEC 4.0 JQ-3 registers         */
-+    e_MODULE_ID_SEC_RTIC,           /**< SEC 4.0 RTIC registers         */
-+    e_MODULE_ID_SEC_DECO0_CCB0,     /**< SEC 4.0 DECO-0/CCB-0 registers */
-+    e_MODULE_ID_SEC_DECO1_CCB1,     /**< SEC 4.0 DECO-1/CCB-1 registers */
-+    e_MODULE_ID_SEC_DECO2_CCB2,     /**< SEC 4.0 DECO-2/CCB-2 registers */
-+    e_MODULE_ID_SEC_DECO3_CCB3,     /**< SEC 4.0 DECO-3/CCB-3 registers */
-+    e_MODULE_ID_SEC_DECO4_CCB4,     /**< SEC 4.0 DECO-4/CCB-4 registers */
-+
-+    e_MODULE_ID_PIC,                /**< PIC */
-+    e_MODULE_ID_GPIO,               /**< GPIO */
-+    e_MODULE_ID_SERDES,             /**< SERDES */
-+    e_MODULE_ID_CPC_1,              /**< CoreNet-Platform-Cache 1 */
-+    e_MODULE_ID_CPC_2,              /**< CoreNet-Platform-Cache 2 */
-+
-+    e_MODULE_ID_SRIO_PORTS,         /**< RapidIO controller */
-+
-+    e_MODULE_ID_DUMMY_LAST
-+} e_ModuleId;
-+
-+#define NUM_OF_MODULES  e_MODULE_ID_DUMMY_LAST
-+
-+
-+#endif /* __PART_INTEGRATION_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/P1023/dpaa_integration_ext.h
-@@ -0,0 +1,213 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**
-+
-+ @File          dpaa_integration_ext.h
-+
-+ @Description   P1023 FM external definitions and structures.
-+*//***************************************************************************/
-+#ifndef __DPAA_INTEGRATION_EXT_H
-+#define __DPAA_INTEGRATION_EXT_H
-+
-+#include "std_ext.h"
-+
-+
-+#define DPAA_VERSION    10
-+
-+typedef enum e_DpaaSwPortal {
-+    e_DPAA_SWPORTAL0 = 0,
-+    e_DPAA_SWPORTAL1,
-+    e_DPAA_SWPORTAL2,
-+    e_DPAA_SWPORTAL_DUMMY_LAST
-+} e_DpaaSwPortal;
-+
-+typedef enum {
-+    e_DPAA_DCPORTAL0 = 0,
-+    e_DPAA_DCPORTAL2,
-+    e_DPAA_DCPORTAL_DUMMY_LAST
-+} e_DpaaDcPortal;
-+
-+#define DPAA_MAX_NUM_OF_SW_PORTALS      e_DPAA_SWPORTAL_DUMMY_LAST
-+#define DPAA_MAX_NUM_OF_DC_PORTALS      e_DPAA_DCPORTAL_DUMMY_LAST
-+
-+/*****************************************************************************
-+ QMAN INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define QM_MAX_NUM_OF_POOL_CHANNELS 3
-+#define QM_MAX_NUM_OF_WQ            8
-+#define QM_MAX_NUM_OF_SWP_AS        2
-+#define QM_MAX_NUM_OF_CGS           64
-+#define QM_MAX_NUM_OF_FQIDS         (16*MEGABYTE)
-+
-+typedef enum {
-+    e_QM_FQ_CHANNEL_SWPORTAL0 = 0,
-+    e_QM_FQ_CHANNEL_SWPORTAL1,
-+    e_QM_FQ_CHANNEL_SWPORTAL2,
-+
-+    e_QM_FQ_CHANNEL_POOL1 = 0x21,
-+    e_QM_FQ_CHANNEL_POOL2,
-+    e_QM_FQ_CHANNEL_POOL3,
-+
-+    e_QM_FQ_CHANNEL_FMAN0_SP0 = 0x40,
-+    e_QM_FQ_CHANNEL_FMAN0_SP1,
-+    e_QM_FQ_CHANNEL_FMAN0_SP2,
-+    e_QM_FQ_CHANNEL_FMAN0_SP3,
-+    e_QM_FQ_CHANNEL_FMAN0_SP4,
-+    e_QM_FQ_CHANNEL_FMAN0_SP5,
-+    e_QM_FQ_CHANNEL_FMAN0_SP6,
-+
-+
-+    e_QM_FQ_CHANNEL_CAAM = 0x80
-+} e_QmFQChannel;
-+
-+/*****************************************************************************
-+ BMAN INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define BM_MAX_NUM_OF_POOLS         8
-+
-+/*****************************************************************************
-+ SEC INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define SEC_NUM_OF_DECOS    2
-+#define SEC_ALL_DECOS_MASK  0x00000003
-+#define SEC_RNGB
-+#define SEC_NO_ESP_TRAILER_REMOVAL
-+
-+/*****************************************************************************
-+ FM INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define INTG_MAX_NUM_OF_FM          1
-+
-+/* Ports defines */
-+#define FM_MAX_NUM_OF_1G_MACS       2
-+#define FM_MAX_NUM_OF_10G_MACS      0
-+#define FM_MAX_NUM_OF_MACS          (FM_MAX_NUM_OF_1G_MACS + FM_MAX_NUM_OF_10G_MACS)
-+#define FM_MAX_NUM_OF_OH_PORTS      5
-+
-+#define FM_MAX_NUM_OF_1G_RX_PORTS   FM_MAX_NUM_OF_1G_MACS
-+#define FM_MAX_NUM_OF_10G_RX_PORTS  FM_MAX_NUM_OF_10G_MACS
-+#define FM_MAX_NUM_OF_RX_PORTS      (FM_MAX_NUM_OF_10G_RX_PORTS + FM_MAX_NUM_OF_1G_RX_PORTS)
-+
-+#define FM_MAX_NUM_OF_1G_TX_PORTS   FM_MAX_NUM_OF_1G_MACS
-+#define FM_MAX_NUM_OF_10G_TX_PORTS  FM_MAX_NUM_OF_10G_MACS
-+#define FM_MAX_NUM_OF_TX_PORTS      (FM_MAX_NUM_OF_10G_TX_PORTS + FM_MAX_NUM_OF_1G_TX_PORTS)
-+
-+#define FM_MAX_NUM_OF_MACSECS       1
-+
-+#define FM_MACSEC_SUPPORT
-+
-+#define FM_LOW_END_RESTRICTION      /* prevents the use of TX port 1 with OP port 0 */
-+
-+#define FM_PORT_MAX_NUM_OF_EXT_POOLS            4           /**< Number of external BM pools per Rx port */
-+#define FM_PORT_MAX_NUM_OF_OBSERVED_EXT_POOLS   2           /**< Number of Offline parsing port external BM pools per Rx port */
-+#define FM_PORT_NUM_OF_CONGESTION_GRPS          32          /**< Total number of congestion groups in QM */
-+#define FM_MAX_NUM_OF_SUB_PORTALS               7
-+
-+/* Rams defines */
-+#define FM_MURAM_SIZE                   (64*KILOBYTE)
-+#define FM_IRAM_SIZE(major, minor)      (32 * KILOBYTE)
-+#define FM_NUM_OF_CTRL                  2
-+
-+/* PCD defines */
-+#define FM_PCD_PLCR_NUM_ENTRIES         32                  /**< Total number of policer profiles */
-+#define FM_PCD_KG_NUM_OF_SCHEMES        16                  /**< Total number of KG schemes */
-+#define FM_PCD_MAX_NUM_OF_CLS_PLANS     128                 /**< Number of classification plan entries. */
-+#define FM_PCD_PRS_SW_PATCHES_SIZE      0x00000240          /**< Number of bytes saved for patches */
-+#define FM_PCD_SW_PRS_SIZE              0x00000800          /**< Total size of SW parser area */
-+
-+/* RTC defines */
-+#define FM_RTC_NUM_OF_ALARMS            2
-+#define FM_RTC_NUM_OF_PERIODIC_PULSES   2
-+#define FM_RTC_NUM_OF_EXT_TRIGGERS      2
-+
-+/* QMI defines */
-+#define QMI_MAX_NUM_OF_TNUMS            15
-+
-+/* FPM defines */
-+#define FM_NUM_OF_FMAN_CTRL_EVENT_REGS  4
-+
-+/* DMA defines */
-+#define DMA_THRESH_MAX_COMMQ            15
-+#define DMA_THRESH_MAX_BUF              7
-+
-+/* BMI defines */
-+#define BMI_MAX_NUM_OF_TASKS            64
-+#define BMI_MAX_NUM_OF_DMAS             16
-+#define BMI_MAX_FIFO_SIZE              (FM_MURAM_SIZE)
-+#define PORT_MAX_WEIGHT                 4
-+
-+/*****************************************************************************
-+ FM MACSEC INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define NUM_OF_RX_SC                16
-+#define NUM_OF_TX_SC                16
-+
-+#define NUM_OF_SA_PER_RX_SC         2
-+#define NUM_OF_SA_PER_TX_SC         2
-+
-+/**************************************************************************//**
-+ @Description   Enum for inter-module interrupts registration
-+*//***************************************************************************/
-+
-+/* 1023 unique features */
-+#define FM_QMI_NO_ECC_EXCEPTIONS
-+#define FM_CSI_CFED_LIMIT
-+#define FM_PEDANTIC_DMA
-+#define FM_QMI_NO_DEQ_OPTIONS_SUPPORT
-+#define FM_FIFO_ALLOCATION_ALG
-+#define FM_DEQ_PIPELINE_PARAMS_FOR_OP
-+#define FM_HAS_TOTAL_DMAS
-+#define FM_KG_NO_IPPID_SUPPORT
-+#define FM_NO_GUARANTEED_RESET_VALUES
-+#define FM_MAC_RESET
-+
-+/* FM erratas */
-+#define FM_RX_PREAM_4_ERRATA_DTSEC_A001
-+#define FM_MAGIC_PACKET_UNRECOGNIZED_ERRATA_DTSEC2      /* No implementation, Out of LLD scope */
-+
-+#define FM_DEBUG_TRACE_FMAN_A004                        /* No implementation, Out of LLD scope */
-+#define FM_INT_BUF_LEAK_FMAN_A005                       /* No implementation, Out of LLD scope. App must avoid S/G */
-+
-+#define FM_GTS_AFTER_DROPPED_FRAME_ERRATA_DTSEC_A004839
-+
-+/* #define FM_UCODE_NOT_RESET_ERRATA_BUGZILLA6173 */
-+
-+/*
-+TKT056919 - axi12axi0 can hang if read request follows the single byte write on the very next cycle
-+TKT038900 - FM dma lockup occur due to AXI slave protocol violation
-+*/
-+#define FM_LOCKUP_ALIGNMENT_ERRATA_FMAN_SW004
-+
-+
-+#endif /* __DPAA_INTEGRATION_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/P1023/part_ext.h
-@@ -0,0 +1,82 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+
-+ @File          part_ext.h
-+
-+ @Description   Definitions for the part (integration) module.
-+*//***************************************************************************/
-+
-+#ifndef __PART_EXT_H
-+#define __PART_EXT_H
-+
-+#include "std_ext.h"
-+#include "part_integration_ext.h"
-+
-+
-+#if !(defined(MPC8306) || \
-+      defined(MPC8309) || \
-+      defined(MPC834x) || \
-+      defined(MPC836x) || \
-+      defined(MPC832x) || \
-+      defined(MPC837x) || \
-+      defined(MPC8568) || \
-+      defined(MPC8569) || \
-+      defined(P1020)   || \
-+      defined(P1021)   || \
-+      defined(P1022)   || \
-+      defined(P1023)   || \
-+      defined(P2020)   || \
-+      defined(P3041)   || \
-+      defined(P4080)   || \
-+      defined(P5020)   || \
-+      defined(MSC814x))
-+#error "unable to proceed without chip-definition"
-+#endif
-+
-+
-+/**************************************************************************//*
-+ @Description   Part data structure - must be contained in any integration
-+                data structure.
-+*//***************************************************************************/
-+typedef struct t_Part
-+{
-+    uint64_t    (* f_GetModuleBase)(t_Handle h_Part, e_ModuleId moduleId);
-+                /**< Returns the address of the module's memory map base. */
-+    e_ModuleId  (* f_GetModuleIdByBase)(t_Handle h_Part, uint64_t baseAddress);
-+                /**< Returns the module's ID according to its memory map base. */
-+} t_Part;
-+
-+
-+#endif /* __PART_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/P1023/part_integration_ext.h
-@@ -0,0 +1,635 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**************************************************************************//**
-+ @File          part_integration_ext.h
-+
-+ @Description   P1023 external definitions and structures.
-+*//***************************************************************************/
-+#ifndef __PART_INTEGRATION_EXT_H
-+#define __PART_INTEGRATION_EXT_H
-+
-+#include "std_ext.h"
-+#include "dpaa_integration_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         1023_chip_id P1023 Application Programming Interface
-+
-+ @Description   P1023 Chip functions,definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+#define INTG_MAX_NUM_OF_CORES   2
-+
-+
-+/**************************************************************************//**
-+ @Description   Module types.
-+*//***************************************************************************/
-+typedef enum e_ModuleId
-+{
-+    e_MODULE_ID_LAW,            /**< Local Access module                     */
-+    e_MODULE_ID_ECM,            /**< e500 Coherency Module                   */
-+    e_MODULE_ID_DDR,            /**< DDR memory controller                   */
-+    e_MODULE_ID_I2C_1,          /**< I2C 1                                   */
-+    e_MODULE_ID_I2C_2,          /**< I2C 1                                   */
-+    e_MODULE_ID_DUART_1,        /**< DUART module 1                          */
-+    e_MODULE_ID_DUART_2,        /**< DUART module 2                          */
-+    e_MODULE_ID_LBC,            /**< Local bus memory controller module      */
-+    e_MODULE_ID_PCIE_1,         /**< PCI Express 1 controller module         */
-+    e_MODULE_ID_PCIE_ATMU_1,    /**< PCI 1 ATMU Window                       */
-+    e_MODULE_ID_PCIE_2,         /**< PCI Express 2 controller module         */
-+    e_MODULE_ID_PCIE_ATMU_2,    /**< PCI 2 ATMU Window                       */
-+    e_MODULE_ID_PCIE_3,         /**< PCI Express 3 controller module         */
-+    e_MODULE_ID_PCIE_ATMU_3,    /**< PCI 3 ATMU Window                       */
-+    e_MODULE_ID_MSI,            /**< MSI registers                           */
-+    e_MODULE_ID_L2_SRAM,        /**< L2/SRAM Memory-Mapped controller module */
-+    e_MODULE_ID_DMA_1,          /**< DMA controller 1                        */
-+    e_MODULE_ID_DMA_2,          /**< DMA controller 2                        */
-+    e_MODULE_ID_EPIC,           /**< Programmable interrupt controller       */
-+    e_MODULE_ID_ESPI,           /**< ESPI module                             */
-+    e_MODULE_ID_GPIO,           /**< General Purpose I/O                     */
-+    e_MODULE_ID_SEC_GEN,        /**< SEC 4.0 General registers               */
-+    e_MODULE_ID_SEC_QI,         /**< SEC 4.0 QI registers                    */
-+    e_MODULE_ID_SEC_JQ0,        /**< SEC 4.0 JQ-0 registers                  */
-+    e_MODULE_ID_SEC_JQ1,        /**< SEC 4.0 JQ-1 registers                  */
-+    e_MODULE_ID_SEC_JQ2,        /**< SEC 4.0 JQ-2 registers                  */
-+    e_MODULE_ID_SEC_JQ3,        /**< SEC 4.0 JQ-3 registers                  */
-+    e_MODULE_ID_SEC_RTIC,       /**< SEC 4.0 RTIC registers                  */
-+    e_MODULE_ID_SEC_DECO0_CCB0, /**< SEC 4.0 DECO-0/CCB-0 registers          */
-+    e_MODULE_ID_SEC_DECO1_CCB1, /**< SEC 4.0 DECO-1/CCB-1 registers          */
-+    e_MODULE_ID_SEC_DECO2_CCB2, /**< SEC 4.0 DECO-2/CCB-2 registers          */
-+    e_MODULE_ID_SEC_DECO3_CCB3, /**< SEC 4.0 DECO-3/CCB-3 registers          */
-+    e_MODULE_ID_SEC_DECO4_CCB4, /**< SEC 4.0 DECO-4/CCB-4 registers          */
-+    e_MODULE_ID_USB_DR_1,       /**< USB 2.0 module 1                        */
-+    e_MODULE_ID_USB_DR_2,       /**< USB 2.0 module 2                        */
-+    e_MODULE_ID_ETSEC_MII_MNG,  /**< MII MNG registers                       */
-+    e_MODULE_ID_ETSEC_1,        /**< ETSEC module 1                             */
-+    e_MODULE_ID_ETSEC_2,        /**< ETSEC module 2                             */
-+    e_MODULE_ID_GUTS,           /**< Serial DMA                              */
-+    e_MODULE_ID_PM,             /**< Performance Monitor module              */
-+    e_MODULE_ID_QM,                 /**< Queue manager module */
-+    e_MODULE_ID_BM,                 /**< Buffer manager module */
-+    e_MODULE_ID_QM_CE_PORTAL,
-+    e_MODULE_ID_QM_CI_PORTAL,
-+    e_MODULE_ID_BM_CE_PORTAL,
-+    e_MODULE_ID_BM_CI_PORTAL,
-+    e_MODULE_ID_FM,                /**< Frame manager #1 module */
-+    e_MODULE_ID_FM_RTC,            /**< FM Real-Time-Clock */
-+    e_MODULE_ID_FM_MURAM,          /**< FM Multi-User-RAM */
-+    e_MODULE_ID_FM_BMI,            /**< FM BMI block */
-+    e_MODULE_ID_FM_QMI,            /**< FM QMI block */
-+    e_MODULE_ID_FM_PRS,            /**< FM parser block */
-+    e_MODULE_ID_FM_PORT_HO0,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO1,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO2,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO3,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_HO4,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM_PORT_1GRx0,     /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GRx1,     /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx0,     /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PORT_1GTx1,     /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM_PLCR,           /**< FM Policer */
-+    e_MODULE_ID_FM_KG,             /**< FM Keygen */
-+    e_MODULE_ID_FM_DMA,            /**< FM DMA */
-+    e_MODULE_ID_FM_FPM,            /**< FM FPM */
-+    e_MODULE_ID_FM_IRAM,           /**< FM Instruction-RAM */
-+    e_MODULE_ID_FM_1GMDIO0,        /**< FM 1G MDIO MAC 0*/
-+    e_MODULE_ID_FM_1GMDIO1,        /**< FM 1G MDIO MAC 1*/
-+    e_MODULE_ID_FM_PRS_IRAM,       /**< FM SW-parser Instruction-RAM */
-+    e_MODULE_ID_FM_RISC0,          /**< FM risc #0 */
-+    e_MODULE_ID_FM_RISC1,          /**< FM risc #1 */
-+    e_MODULE_ID_FM_1GMAC0,         /**< FM 1G MAC #0 */
-+    e_MODULE_ID_FM_1GMAC1,         /**< FM 1G MAC #1 */
-+    e_MODULE_ID_FM_MACSEC,         /**< FM MACSEC */
-+
-+    e_MODULE_ID_DUMMY_LAST
-+} e_ModuleId;
-+
-+#define NUM_OF_MODULES  e_MODULE_ID_DUMMY_LAST
-+
-+
-+#define P1023_OFFSET_LAW                    0x00000C08
-+#define P1023_OFFSET_ECM                    0x00001000
-+#define P1023_OFFSET_DDR                    0x00002000
-+#define P1023_OFFSET_I2C1                   0x00003000
-+#define P1023_OFFSET_I2C2                   0x00003100
-+#define P1023_OFFSET_DUART1                 0x00004500
-+#define P1023_OFFSET_DUART2                 0x00004600
-+#define P1023_OFFSET_LBC                    0x00005000
-+#define P1023_OFFSET_ESPI                   0x00007000
-+#define P1023_OFFSET_PCIE2                  0x00009000
-+#define P1023_OFFSET_PCIE2_ATMU             0x00009C00
-+#define P1023_OFFSET_PCIE1                  0x0000A000
-+#define P1023_OFFSET_PCIE1_ATMU             0x0000AC00
-+#define P1023_OFFSET_PCIE3                  0x0000B000
-+#define P1023_OFFSET_PCIE3_ATMU             0x0000BC00
-+#define P1023_OFFSET_DMA2                   0x0000C100
-+#define P1023_OFFSET_GPIO                   0x0000F000
-+#define P1023_OFFSET_L2_SRAM                0x00020000
-+#define P1023_OFFSET_DMA1                   0x00021100
-+#define P1023_OFFSET_USB1                   0x00022000
-+#define P1023_OFFSET_SEC_GEN                0x00030000
-+#define P1023_OFFSET_SEC_JQ0                0x00031000
-+#define P1023_OFFSET_SEC_JQ1                0x00032000
-+#define P1023_OFFSET_SEC_JQ2                0x00033000
-+#define P1023_OFFSET_SEC_JQ3                0x00034000
-+#define P1023_OFFSET_SEC_RTIC               0x00036000
-+#define P1023_OFFSET_SEC_QI                 0x00037000
-+#define P1023_OFFSET_SEC_DECO0_CCB0         0x00038000
-+#define P1023_OFFSET_SEC_DECO1_CCB1         0x00039000
-+#define P1023_OFFSET_SEC_DECO2_CCB2         0x0003a000
-+#define P1023_OFFSET_SEC_DECO3_CCB3         0x0003b000
-+#define P1023_OFFSET_SEC_DECO4_CCB4         0x0003c000
-+#define P1023_OFFSET_PIC                    0x00040000
-+#define P1023_OFFSET_MSI                    0x00041600
-+#define P1023_OFFSET_AXI                    0x00081000
-+#define P1023_OFFSET_QM                     0x00088000
-+#define P1023_OFFSET_BM                     0x0008A000
-+#define P1022_OFFSET_PM                     0x000E1000
-+
-+#define P1023_OFFSET_GUTIL                  0x000E0000
-+#define P1023_OFFSET_PM                     0x000E1000
-+#define P1023_OFFSET_DEBUG                  0x000E2000
-+#define P1023_OFFSET_SERDES                 0x000E3000
-+#define P1023_OFFSET_ROM                    0x000F0000
-+#define P1023_OFFSET_FM                     0x00100000
-+
-+#define P1023_OFFSET_FM_MURAM               (P1023_OFFSET_FM + 0x00000000)
-+#define P1023_OFFSET_FM_BMI                 (P1023_OFFSET_FM + 0x00080000)
-+#define P1023_OFFSET_FM_QMI                 (P1023_OFFSET_FM + 0x00080400)
-+#define P1023_OFFSET_FM_PRS                 (P1023_OFFSET_FM + 0x00080800)
-+#define P1023_OFFSET_FM_PORT_HO0            (P1023_OFFSET_FM + 0x00081000)
-+#define P1023_OFFSET_FM_PORT_HO1            (P1023_OFFSET_FM + 0x00082000)
-+#define P1023_OFFSET_FM_PORT_HO2            (P1023_OFFSET_FM + 0x00083000)
-+#define P1023_OFFSET_FM_PORT_HO3            (P1023_OFFSET_FM + 0x00084000)
-+#define P1023_OFFSET_FM_PORT_HO4            (P1023_OFFSET_FM + 0x00085000)
-+#define P1023_OFFSET_FM_PORT_1GRX0          (P1023_OFFSET_FM + 0x00088000)
-+#define P1023_OFFSET_FM_PORT_1GRX1          (P1023_OFFSET_FM + 0x00089000)
-+#define P1023_OFFSET_FM_PORT_1GTX0          (P1023_OFFSET_FM + 0x000A8000)
-+#define P1023_OFFSET_FM_PORT_1GTX1          (P1023_OFFSET_FM + 0x000A9000)
-+#define P1023_OFFSET_FM_PLCR                (P1023_OFFSET_FM + 0x000C0000)
-+#define P1023_OFFSET_FM_KG                  (P1023_OFFSET_FM + 0x000C1000)
-+#define P1023_OFFSET_FM_DMA                 (P1023_OFFSET_FM + 0x000C2000)
-+#define P1023_OFFSET_FM_FPM                 (P1023_OFFSET_FM + 0x000C3000)
-+#define P1023_OFFSET_FM_IRAM                (P1023_OFFSET_FM + 0x000C4000)
-+#define P1023_OFFSET_FM_PRS_IRAM            (P1023_OFFSET_FM + 0x000C7000)
-+#define P1023_OFFSET_FM_RISC0               (P1023_OFFSET_FM + 0x000D0000)
-+#define P1023_OFFSET_FM_RISC1               (P1023_OFFSET_FM + 0x000D0400)
-+#define P1023_OFFSET_FM_MACSEC              (P1023_OFFSET_FM + 0x000D8000)
-+#define P1023_OFFSET_FM_1GMAC0              (P1023_OFFSET_FM + 0x000E0000)
-+#define P1023_OFFSET_FM_1GMDIO0             (P1023_OFFSET_FM + 0x000E1120)
-+#define P1023_OFFSET_FM_1GMAC1              (P1023_OFFSET_FM + 0x000E2000)
-+#define P1023_OFFSET_FM_1GMDIO1             (P1023_OFFSET_FM + 0x000E3000)
-+#define P1023_OFFSET_FM_RTC                 (P1023_OFFSET_FM + 0x000FE000)
-+
-+/* Offsets relative to QM or BM portals base */
-+#define P1023_OFFSET_PORTALS_CE_AREA        0x00000000        /* cache enabled area */
-+#define P1023_OFFSET_PORTALS_CI_AREA        0x00100000        /* cache inhibited area */
-+
-+#define P1023_OFFSET_PORTALS_CE(portal)     (P1023_OFFSET_PORTALS_CE_AREA + 0x4000 * (portal))
-+#define P1023_OFFSET_PORTALS_CI(portal)     (P1023_OFFSET_PORTALS_CI_AREA + 0x1000 * (portal))
-+
-+/**************************************************************************//**
-+ @Description   Transaction source ID (for memory controllers error reporting).
-+*//***************************************************************************/
-+typedef enum e_TransSrc
-+{
-+    e_TRANS_SRC_PCIE_2          = 0x01, /**< PCIe port 2                    */
-+    e_TRANS_SRC_PCIE_1          = 0x02, /**< PCIe port 1                    */
-+    e_TRANS_SRC_PCIE_3          = 0x03, /**< PCIe port 3                    */
-+    e_TRANS_SRC_LBC             = 0x04, /**< Enhanced local bus             */
-+    e_TRANS_SRC_DPAA_SW_PORTALS = 0x0E, /**< DPAA software portals or SRAM  */
-+    e_TRANS_SRC_DDR             = 0x0F, /**< DDR controller                 */
-+    e_TRANS_SRC_CORE_INS_FETCH  = 0x10, /**< Processor (instruction)        */
-+    e_TRANS_SRC_CORE_DATA       = 0x11, /**< Processor (data)               */
-+    e_TRANS_SRC_DMA             = 0x15  /**< DMA                            */
-+} e_TransSrc;
-+
-+/**************************************************************************//**
-+ @Description   Local Access Window Target interface ID
-+*//***************************************************************************/
-+typedef enum e_P1023LawTargetId
-+{
-+    e_P1023_LAW_TARGET_PCIE_2       = 0x01, /**< PCI Express 2 target interface */
-+    e_P1023_LAW_TARGET_PCIE_1       = 0x02, /**< PCI Express 1 target interface */
-+    e_P1023_LAW_TARGET_PCIE_3       = 0x03, /**< PCI Express 3 target interface */
-+    e_P1023_LAW_TARGET_LBC          = 0x04, /**< Local bus target interface */
-+    e_P1023_LAW_TARGET_QM_PORTALS   = 0x0E, /**< Queue Manager Portals */
-+    e_P1023_LAW_TARGET_BM_PORTALS   = 0x0E, /**< Buffer Manager Portals */
-+    e_P1023_LAW_TARGET_SRAM         = 0x0E, /**< SRAM scratchpad */
-+    e_P1023_LAW_TARGET_DDR          = 0x0F, /**< DDR target interface */
-+    e_P1023_LAW_TARGET_NONE         = 0xFF  /**< Invalid target interface */
-+} e_P1023LawTargetId;
-+
-+
-+/**************************************************************************//**
-+ @Group         1023_init_grp P1023 Initialization Unit
-+
-+ @Description   P1023 initialization unit API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   Part ID and revision number
-+*//***************************************************************************/
-+typedef enum e_P1023DeviceName
-+{
-+    e_P1023_REV_INVALID     = 0x00000000,       /**< Invalid revision */
-+    e_SC1023_REV_1_0        = (int)0x80FC0010,  /**< SC1023 rev 1.0 */
-+    e_SC1023_REV_1_1        = (int)0x80FC0011,  /**< SC1023 rev 1.1 */
-+    e_P1023_REV_1_0         = (int)0x80FE0010,  /**< P1023 rev 1.0 with security */
-+    e_P1023_REV_1_1         = (int)0x80FE0011,  /**< P1023 rev 1.1 with security */
-+    e_P1017_REV_1_1         = (int)0x80FF0011,  /**< P1017 rev 1.1 with security */
-+    e_P1023_REV_1_0_NO_SEC  = (int)0x80F60010,  /**< P1023 rev 1.0 without security */
-+    e_P1023_REV_1_1_NO_SEC  = (int)0x80F60011,  /**< P1023 rev 1.1 without security */
-+    e_P1017_REV_1_1_NO_SEC  = (int)0x80F70011   /**< P1017 rev 1.1 without security */
-+} e_P1023DeviceName;
-+
-+/**************************************************************************//**
-+ @Description   structure representing P1023 initialization parameters
-+*//***************************************************************************/
-+typedef struct t_P1023Params
-+{
-+    uintptr_t   ccsrBaseAddress;        /**< CCSR base address (virtual) */
-+    uintptr_t   bmPortalsBaseAddress;   /**< Portals base address (virtual) */
-+    uintptr_t   qmPortalsBaseAddress;   /**< Portals base address (virtual) */
-+} t_P1023Params;
-+
-+/**************************************************************************//**
-+ @Function      P1023_ConfigAndInit
-+
-+ @Description   General initiation of the chip registers.
-+
-+ @Param[in]     p_P1023Params  - A pointer to data structure of parameters
-+
-+ @Return        A handle to the P1023 data structure.
-+*//***************************************************************************/
-+t_Handle P1023_ConfigAndInit(t_P1023Params *p_P1023Params);
-+
-+/**************************************************************************//**
-+ @Function      P1023_Free
-+
-+ @Description   Free all resources.
-+
-+ @Param         h_P1023 - (In) The handle of the initialized P1023 object.
-+
-+ @Return        E_OK on success; Other value otherwise.
-+*//***************************************************************************/
-+t_Error P1023_Free(t_Handle h_P1023);
-+
-+/**************************************************************************//**
-+ @Function      P1023_GetRevInfo
-+
-+ @Description   This routine enables access to chip and revision information.
-+
-+ @Param[in]     gutilBase       - Base address of P1023 GUTIL registers.
-+
-+ @Return        Part ID and revision.
-+*//***************************************************************************/
-+e_P1023DeviceName P1023_GetRevInfo(uintptr_t gutilBase);
-+
-+/**************************************************************************//**
-+ @Function      P1023_GetE500Factor
-+
-+ @Description   Returns E500 core clock multiplication factor.
-+
-+ @Param[in]     gutilBase       - Base address of P1023 GUTIL registers.
-+ @Param[in]     coreId          - Id of the requested core.
-+ @Param[out]    p_E500MulFactor - Returns E500 to CCB multification factor.
-+ @Param[out]    p_E500DivFactor - Returns E500 to CCB division factor.
-+
-+ @Return        E_OK on success; Other value otherwise.
-+*
-+*//***************************************************************************/
-+t_Error P1023_GetE500Factor(uintptr_t    gutilBase,
-+                            uint32_t    coreId,
-+                            uint32_t    *p_E500MulFactor,
-+                            uint32_t    *p_E500DivFactor);
-+
-+/**************************************************************************//**
-+ @Function      P1023_GetFmFactor
-+
-+ @Description   returns FM multiplication factors. (This value is returned using
-+                two parameters to avoid using float parameter).
-+
-+ @Param[in]     gutilBase       - Base address of P1023 GUTIL registers.
-+ @Param[out]    p_FmMulFactor   - returns E500 to CCB multification factor.
-+ @Param[out]    p_FmDivFactor   - returns E500 to CCB division factor.
-+
-+ @Return        E_OK on success; Other value otherwise.
-+*//***************************************************************************/
-+t_Error  P1023_GetFmFactor(uintptr_t gutilBase, uint32_t *p_FmMulFactor, uint32_t *p_FmDivFactor);
-+
-+/**************************************************************************//**
-+ @Function      P1023_GetCcbFactor
-+
-+ @Description   returns system multiplication factor.
-+
-+ @Param[in]     gutilBase       - Base address of P1023 GUTIL registers.
-+
-+ @Return        System multiplication factor.
-+*//***************************************************************************/
-+uint32_t P1023_GetCcbFactor(uintptr_t gutilBase);
-+
-+#if 0
-+/**************************************************************************//**
-+ @Function      P1023_GetDdrFactor
-+
-+ @Description   returns the multiplication factor of the clock in for the DDR clock .
-+                Note: assumes the ddr_in_clk is identical to the sys_in_clk
-+
-+ @Param[in]     gutilBase       - Base address of P1023 GUTIL registers.
-+ @Param         p_DdrMulFactor  - returns DDR in clk multification factor.
-+ @Param         p_DdrDivFactor  - returns DDR division factor.
-+
-+ @Return        E_OK on success; Other value otherwise..
-+*//***************************************************************************/
-+t_Error P1023_GetDdrFactor( uintptr_t   gutilBase,
-+                            uint32_t    *p_DdrMulFactor,
-+                            uint32_t    *p_DdrDivFactor);
-+
-+/**************************************************************************//**
-+ @Function      P1023_GetDdrType
-+
-+ @Description   returns the multiplication factor of the clock in for the DDR clock .
-+
-+ @Param[in]     gutilBase       - Base address of P1023 GUTIL registers.
-+ @Param         p_DdrType   - (Out) returns DDR type DDR1/DDR2/DDR3.
-+
-+ @Return        E_OK on success; Other value otherwise.
-+*//***************************************************************************/
-+t_Error P1023_GetDdrType(uintptr_t gutilBase, e_DdrType *p_DdrType );
-+#endif
-+
-+/** @} */ /* end of 1023_init_grp group */
-+/** @} */ /* end of 1023_grp group */
-+
-+#define CORE_E500V2
-+
-+#if 0 /* using unified values */
-+/*****************************************************************************
-+ INTEGRATION-SPECIFIC MODULE CODES
-+******************************************************************************/
-+#define MODULE_UNKNOWN          0x00000000
-+#define MODULE_MEM              0x00010000
-+#define MODULE_MM               0x00020000
-+#define MODULE_CORE             0x00030000
-+#define MODULE_P1023            0x00040000
-+#define MODULE_MII              0x00050000
-+#define MODULE_PM               0x00060000
-+#define MODULE_MMU              0x00070000
-+#define MODULE_PIC              0x00080000
-+#define MODULE_L2_CACHE         0x00090000
-+#define MODULE_DUART            0x000a0000
-+#define MODULE_SERDES           0x000b0000
-+#define MODULE_PIO              0x000c0000
-+#define MODULE_QM               0x000d0000
-+#define MODULE_BM               0x000e0000
-+#define MODULE_SEC              0x000f0000
-+#define MODULE_FM               0x00100000
-+#define MODULE_FM_MURAM         0x00110000
-+#define MODULE_FM_PCD           0x00120000
-+#define MODULE_FM_RTC           0x00130000
-+#define MODULE_FM_MAC           0x00140000
-+#define MODULE_FM_PORT          0x00150000
-+#define MODULE_FM_MACSEC        0x00160000
-+#define MODULE_FM_MACSEC_SECY   0x00170000
-+#define MODULE_FM_SP            0x00280000
-+#define MODULE_ECM              0x00190000
-+#define MODULE_DMA              0x001a0000
-+#define MODULE_DDR              0x001b0000
-+#define MODULE_LAW              0x001c0000
-+#define MODULE_LBC              0x001d0000
-+#define MODULE_I2C              0x001e0000
-+#define MODULE_ESPI             0x001f0000
-+#define MODULE_PCI              0x00200000
-+#define MODULE_DPA_PORT         0x00210000
-+#define MODULE_USB              0x00220000
-+#endif /* using unified values */
-+
-+/*****************************************************************************
-+ LBC INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+/**************************************************************************//**
-+ @Group         lbc_exception_grp LBC Exception Unit
-+
-+ @Description   LBC Exception unit API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Anchor        lbc_exbm
-+
-+ @Collection    LBC Errors Bit Mask
-+
-+                These errors are reported through the exceptions callback..
-+                The values can be or'ed in any combination in the errors mask
-+                parameter of the errors report structure.
-+
-+                These errors can also be passed as a bit-mask to
-+                LBC_EnableErrorChecking() or LBC_DisableErrorChecking(),
-+                for enabling or disabling error checking.
-+ @{
-+*//***************************************************************************/
-+#define LBC_ERR_BUS_MONITOR     0x80000000  /**< Bus monitor error */
-+#define LBC_ERR_PARITY_ECC      0x20000000  /**< Parity error for GPCM/UPM */
-+#define LBC_ERR_WRITE_PROTECT   0x04000000  /**< Write protection error */
-+#define LBC_ERR_CHIP_SELECT     0x00080000  /**< Unrecognized chip select */
-+
-+#define LBC_ERR_ALL             (LBC_ERR_BUS_MONITOR | LBC_ERR_PARITY_ECC | \
-+                                 LBC_ERR_WRITE_PROTECT | LBC_ERR_CHIP_SELECT)
-+                                            /**< All possible errors */
-+/* @} */
-+/** @} */ /* end of lbc_exception_grp group */
-+
-+#define LBC_NUM_OF_BANKS            2
-+#define LBC_MAX_CS_SIZE             0x0000000100000000LL
-+#define LBC_ATOMIC_OPERATION_SUPPORT
-+#define LBC_PARITY_SUPPORT
-+#define LBC_ADDRESS_SHIFT_SUPPORT
-+#define LBC_ADDRESS_HOLD_TIME_CTRL
-+#define LBC_HIGH_CLK_DIVIDERS
-+#define LBC_FCM_AVAILABLE
-+
-+
-+/*****************************************************************************
-+ LAW INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define LAW_ARCH_CCB
-+#define LAW_NUM_OF_WINDOWS      12
-+#define LAW_MIN_WINDOW_SIZE     0x0000000000001000LL    /**< 4KB */
-+#define LAW_MAX_WINDOW_SIZE     0x0000001000000000LL    /**< 32GB */
-+
-+
-+/*****************************************************************************
-+ SPI INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define SPI_NUM_OF_CONTROLLERS      1
-+
-+/*****************************************************************************
-+ PCI/PCIe INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+
-+#define PCI_MAX_INBOUND_WINDOWS_NUM     4
-+#define PCI_MAX_OUTBOUND_WINDOWS_NUM    5
-+
-+/**************************************************************************//**
-+ @Description   Target interface of an inbound window
-+*//***************************************************************************/
-+typedef enum e_PciTargetInterface
-+{
-+    e_PCI_TARGET_PCIE_2         = 0x1,  /**<  PCI Express target interface 2 */
-+    e_PCI_TARGET_PCIE_1         = 0x2,  /**<  PCI Express target interface 1 */
-+    e_PCI_TARGET_PCIE_3         = 0x3,  /**<  PCI Express target interface 3 */
-+    e_PCI_TARGET_LOCAL_MEMORY   = 0xF   /**<  Local Memory (DDR SDRAM, Local Bus, SRAM) target interface */
-+
-+} e_PciTargetInterface;
-+
-+/*****************************************************************************
-+ DDR INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define DDR_NUM_OF_VALID_CS         2
-+
-+/*****************************************************************************
-+ SEC INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define SEC_ERRATA_STAT_REGS_UNUSABLE
-+
-+/*****************************************************************************
-+ DMA INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define DMA_NUM_OF_CONTROLLERS      2
-+
-+
-+
-+
-+/*****************************************************************************
-+ 1588 INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define PTP_V2
-+
-+/**************************************************************************//**
-+ @Function      P1023_GetMuxControlReg
-+
-+ @Description   Returns the value of PMUXCR (Alternate Function Signal Multiplex
-+                Control Register)
-+
-+ @Param[in]     gutilBase   - Base address of P1023 GUTIL registers.
-+
-+ @Return        Value of PMUXCR
-+*//***************************************************************************/
-+uint32_t P1023_GetMuxControlReg(uintptr_t gutilBase);
-+
-+/**************************************************************************//**
-+ @Function      P1023_SetMuxControlReg
-+
-+ @Description   Sets the value of PMUXCR (Alternate Function Signal Multiplex
-+                Control Register)
-+
-+ @Param[in]     gutilBase   - Base address of P1023 GUTIL registers.
-+ @Param[in]     val         - the new value for PMUXCR.
-+
-+ @Return        None
-+*//***************************************************************************/
-+void P1023_SetMuxControlReg(uintptr_t gutilBase, uint32_t val);
-+
-+/**************************************************************************//**
-+ @Function      P1023_GetDeviceDisableStatusRegister
-+
-+ @Description   Returns the value of DEVDISR (Device Disable Register)
-+
-+ @Param[in]     gutilBase   - Base address of P1023 GUTIL registers.
-+
-+ @Return        Value of DEVDISR
-+*//***************************************************************************/
-+uint32_t P1023_GetDeviceDisableStatusRegister(uintptr_t gutilBase);
-+
-+/**************************************************************************//**
-+ @Function      P1023_GetPorDeviceStatusRegister
-+
-+ @Description   Returns the value of POR Device Status Register
-+
-+ @Param[in]     gutilBase   - Base address of P1023 GUTIL registers.
-+
-+ @Return        POR Device Status Register
-+*//***************************************************************************/
-+uint32_t P1023_GetPorDeviceStatusRegister(uintptr_t gutilBase);
-+
-+/**************************************************************************//**
-+ @Function      P1023_GetPorBootModeStatusRegister
-+
-+ @Description   Returns the value of POR Boot Mode Status Register
-+
-+ @Param[in]     gutilBase   - Base address of P1023 GUTIL registers.
-+
-+ @Return        POR Boot Mode Status Register value
-+*//***************************************************************************/
-+uint32_t P1023_GetPorBootModeStatusRegister(uintptr_t gutilBase);
-+
-+
-+#define PORDEVSR_SGMII1_DIS     0x10000000
-+#define PORDEVSR_SGMII2_DIS     0x08000000
-+#define PORDEVSR_ECP1           0x02000000
-+#define PORDEVSR_IO_SEL         0x00780000
-+#define PORDEVSR_IO_SEL_SHIFT   19
-+#define PORBMSR_HA              0x00070000
-+#define PORBMSR_HA_SHIFT        16
-+
-+#define DEVDISR_QM_BM           0x80000000
-+#define DEVDISR_FM              0x40000000
-+#define DEVDISR_PCIE1           0x20000000
-+#define DEVDISR_MAC_SEC         0x10000000
-+#define DEVDISR_ELBC            0x08000000
-+#define DEVDISR_PCIE2           0x04000000
-+#define DEVDISR_PCIE3           0x02000000
-+#define DEVDISR_CAAM            0x01000000
-+#define DEVDISR_USB0            0x00800000
-+#define DEVDISR_1588            0x00020000
-+#define DEVDISR_CORE0           0x00008000
-+#define DEVDISR_TB0             0x00004000
-+#define DEVDISR_CORE1           0x00002000
-+#define DEVDISR_TB1             0x00001000
-+#define DEVDISR_DMA1            0x00000400
-+#define DEVDISR_DMA2            0x00000200
-+#define DEVDISR_DDR             0x00000010
-+#define DEVDISR_TSEC1           0x00000080
-+#define DEVDISR_TSEC2           0x00000040
-+#define DEVDISR_SPI             0x00000008
-+#define DEVDISR_I2C             0x00000004
-+#define DEVDISR_DUART           0x00000002
-+
-+
-+#endif /* __PART_INTEGRATION_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/P3040_P4080_P5020/dpaa_integration_ext.h
-@@ -0,0 +1,276 @@
-+/* Copyright (c) 2009-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**************************************************************************//**
-+ @File          dpaa_integration_ext.h
-+
-+ @Description   P3040/P4080/P5020 FM external definitions and structures.
-+*//***************************************************************************/
-+#ifndef __DPAA_INTEGRATION_EXT_H
-+#define __DPAA_INTEGRATION_EXT_H
-+
-+#include "std_ext.h"
-+
-+
-+#define DPAA_VERSION    10
-+
-+typedef enum {
-+    e_DPAA_SWPORTAL0 = 0,
-+    e_DPAA_SWPORTAL1,
-+    e_DPAA_SWPORTAL2,
-+    e_DPAA_SWPORTAL3,
-+    e_DPAA_SWPORTAL4,
-+    e_DPAA_SWPORTAL5,
-+    e_DPAA_SWPORTAL6,
-+    e_DPAA_SWPORTAL7,
-+    e_DPAA_SWPORTAL8,
-+    e_DPAA_SWPORTAL9,
-+    e_DPAA_SWPORTAL_DUMMY_LAST
-+} e_DpaaSwPortal;
-+
-+typedef enum {
-+    e_DPAA_DCPORTAL0 = 0,
-+    e_DPAA_DCPORTAL1,
-+    e_DPAA_DCPORTAL2,
-+    e_DPAA_DCPORTAL3,
-+    e_DPAA_DCPORTAL4,
-+    e_DPAA_DCPORTAL_DUMMY_LAST
-+} e_DpaaDcPortal;
-+
-+#define DPAA_MAX_NUM_OF_SW_PORTALS      e_DPAA_SWPORTAL_DUMMY_LAST
-+#define DPAA_MAX_NUM_OF_DC_PORTALS      e_DPAA_DCPORTAL_DUMMY_LAST
-+
-+/*****************************************************************************
-+ QMan INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define QM_MAX_NUM_OF_POOL_CHANNELS 15              /**< Total number of channels, dedicated and pool */
-+#define QM_MAX_NUM_OF_WQ            8               /**< Number of work queues per channel */
-+#define QM_MAX_NUM_OF_SWP_AS        4
-+#define QM_MAX_NUM_OF_CGS           256             /**< Number of congestion groups */
-+#define QM_MAX_NUM_OF_FQIDS         (16 * MEGABYTE) /**< FQIDs range - 24 bits */
-+
-+/**************************************************************************//**
-+ @Description   Work Queue Channel assignments in QMan.
-+*//***************************************************************************/
-+typedef enum
-+{
-+    e_QM_FQ_CHANNEL_SWPORTAL0 = 0,              /**< Dedicated channels serviced by software portals 0 to 9 */
-+    e_QM_FQ_CHANNEL_SWPORTAL1,
-+    e_QM_FQ_CHANNEL_SWPORTAL2,
-+    e_QM_FQ_CHANNEL_SWPORTAL3,
-+    e_QM_FQ_CHANNEL_SWPORTAL4,
-+    e_QM_FQ_CHANNEL_SWPORTAL5,
-+    e_QM_FQ_CHANNEL_SWPORTAL6,
-+    e_QM_FQ_CHANNEL_SWPORTAL7,
-+    e_QM_FQ_CHANNEL_SWPORTAL8,
-+    e_QM_FQ_CHANNEL_SWPORTAL9,
-+
-+    e_QM_FQ_CHANNEL_POOL1 = 0x21,               /**< Pool channels that can be serviced by any of the software portals */
-+    e_QM_FQ_CHANNEL_POOL2,
-+    e_QM_FQ_CHANNEL_POOL3,
-+    e_QM_FQ_CHANNEL_POOL4,
-+    e_QM_FQ_CHANNEL_POOL5,
-+    e_QM_FQ_CHANNEL_POOL6,
-+    e_QM_FQ_CHANNEL_POOL7,
-+    e_QM_FQ_CHANNEL_POOL8,
-+    e_QM_FQ_CHANNEL_POOL9,
-+    e_QM_FQ_CHANNEL_POOL10,
-+    e_QM_FQ_CHANNEL_POOL11,
-+    e_QM_FQ_CHANNEL_POOL12,
-+    e_QM_FQ_CHANNEL_POOL13,
-+    e_QM_FQ_CHANNEL_POOL14,
-+    e_QM_FQ_CHANNEL_POOL15,
-+
-+    e_QM_FQ_CHANNEL_FMAN0_SP0 = 0x40,           /**< Dedicated channels serviced by Direct Connect Portal 0:
-+                                                     connected to FMan 0; assigned in incrementing order to
-+                                                     each sub-portal (SP) in the portal */
-+    e_QM_FQ_CHANNEL_FMAN0_SP1,
-+    e_QM_FQ_CHANNEL_FMAN0_SP2,
-+    e_QM_FQ_CHANNEL_FMAN0_SP3,
-+    e_QM_FQ_CHANNEL_FMAN0_SP4,
-+    e_QM_FQ_CHANNEL_FMAN0_SP5,
-+    e_QM_FQ_CHANNEL_FMAN0_SP6,
-+    e_QM_FQ_CHANNEL_FMAN0_SP7,
-+    e_QM_FQ_CHANNEL_FMAN0_SP8,
-+    e_QM_FQ_CHANNEL_FMAN0_SP9,
-+    e_QM_FQ_CHANNEL_FMAN0_SP10,
-+    e_QM_FQ_CHANNEL_FMAN0_SP11,
-+/* difference between 5020 and 4080 :) */
-+    e_QM_FQ_CHANNEL_FMAN1_SP0 = 0x60,
-+    e_QM_FQ_CHANNEL_FMAN1_SP1,
-+    e_QM_FQ_CHANNEL_FMAN1_SP2,
-+    e_QM_FQ_CHANNEL_FMAN1_SP3,
-+    e_QM_FQ_CHANNEL_FMAN1_SP4,
-+    e_QM_FQ_CHANNEL_FMAN1_SP5,
-+    e_QM_FQ_CHANNEL_FMAN1_SP6,
-+    e_QM_FQ_CHANNEL_FMAN1_SP7,
-+    e_QM_FQ_CHANNEL_FMAN1_SP8,
-+    e_QM_FQ_CHANNEL_FMAN1_SP9,
-+    e_QM_FQ_CHANNEL_FMAN1_SP10,
-+    e_QM_FQ_CHANNEL_FMAN1_SP11,
-+
-+    e_QM_FQ_CHANNEL_CAAM = 0x80,                /**< Dedicated channel serviced by Direct Connect Portal 2:
-+                                                     connected to SEC 4.x */
-+
-+    e_QM_FQ_CHANNEL_PME = 0xA0,                 /**< Dedicated channel serviced by Direct Connect Portal 3:
-+                                                     connected to PME */
-+    e_QM_FQ_CHANNEL_RAID = 0xC0                 /**< Dedicated channel serviced by Direct Connect Portal 4:
-+                                                     connected to RAID */
-+} e_QmFQChannel;
-+
-+/*****************************************************************************
-+ BMan INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define BM_MAX_NUM_OF_POOLS         64          /**< Number of buffers pools */
-+
-+
-+/*****************************************************************************
-+ FM INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define INTG_MAX_NUM_OF_FM          2
-+
-+/* Ports defines */
-+#define FM_MAX_NUM_OF_1G_MACS       5
-+#define FM_MAX_NUM_OF_10G_MACS      1
-+#define FM_MAX_NUM_OF_MACS          (FM_MAX_NUM_OF_1G_MACS + FM_MAX_NUM_OF_10G_MACS)
-+#define FM_MAX_NUM_OF_OH_PORTS      7
-+
-+#define FM_MAX_NUM_OF_1G_RX_PORTS   FM_MAX_NUM_OF_1G_MACS
-+#define FM_MAX_NUM_OF_10G_RX_PORTS  FM_MAX_NUM_OF_10G_MACS
-+#define FM_MAX_NUM_OF_RX_PORTS      (FM_MAX_NUM_OF_10G_RX_PORTS + FM_MAX_NUM_OF_1G_RX_PORTS)
-+
-+#define FM_MAX_NUM_OF_1G_TX_PORTS   FM_MAX_NUM_OF_1G_MACS
-+#define FM_MAX_NUM_OF_10G_TX_PORTS  FM_MAX_NUM_OF_10G_MACS
-+#define FM_MAX_NUM_OF_TX_PORTS      (FM_MAX_NUM_OF_10G_TX_PORTS + FM_MAX_NUM_OF_1G_TX_PORTS)
-+
-+#define FM_PORT_MAX_NUM_OF_EXT_POOLS            8           /**< Number of external BM pools per Rx port */
-+#define FM_PORT_NUM_OF_CONGESTION_GRPS          256         /**< Total number of congestion groups in QM */
-+#define FM_MAX_NUM_OF_SUB_PORTALS               12
-+#define FM_PORT_MAX_NUM_OF_OBSERVED_EXT_POOLS   0
-+
-+/* Rams defines */
-+#define FM_MURAM_SIZE                   (160*KILOBYTE)
-+#define FM_IRAM_SIZE(major, minor)      (64 * KILOBYTE)
-+#define FM_NUM_OF_CTRL                  2
-+
-+/* PCD defines */
-+#define FM_PCD_PLCR_NUM_ENTRIES         256             /**< Total number of policer profiles */
-+#define FM_PCD_KG_NUM_OF_SCHEMES        32              /**< Total number of KG schemes */
-+#define FM_PCD_MAX_NUM_OF_CLS_PLANS     256             /**< Number of classification plan entries. */
-+#define FM_PCD_PRS_SW_PATCHES_SIZE      0x00000200      /**< Number of bytes saved for patches */
-+#define FM_PCD_SW_PRS_SIZE              0x00000800      /**< Total size of SW parser area */
-+
-+/* RTC defines */
-+#define FM_RTC_NUM_OF_ALARMS            2                   /**< RTC number of alarms */
-+#define FM_RTC_NUM_OF_PERIODIC_PULSES   2                   /**< RTC number of periodic pulses */
-+#define FM_RTC_NUM_OF_EXT_TRIGGERS      2                   /**< RTC number of external triggers */
-+
-+/* QMI defines */
-+#define QMI_MAX_NUM_OF_TNUMS            64
-+#define QMI_DEF_TNUMS_THRESH            48
-+
-+/* FPM defines */
-+#define FM_NUM_OF_FMAN_CTRL_EVENT_REGS  4
-+
-+/* DMA defines */
-+#define DMA_THRESH_MAX_COMMQ            31
-+#define DMA_THRESH_MAX_BUF              127
-+
-+/* BMI defines */
-+#define BMI_MAX_NUM_OF_TASKS            128
-+#define BMI_MAX_NUM_OF_DMAS             32
-+#define BMI_MAX_FIFO_SIZE               (FM_MURAM_SIZE)
-+#define PORT_MAX_WEIGHT                 16
-+
-+
-+#define FM_CHECK_PORT_RESTRICTIONS(__validPorts, __newPortIndx)   TRUE
-+
-+/* p4080-rev1 unique features */
-+#define QM_CGS_NO_FRAME_MODE
-+
-+/* p4080 unique features */
-+#define FM_NO_DISPATCH_RAM_ECC
-+#define FM_NO_WATCHDOG
-+#define FM_NO_TNUM_AGING
-+#define FM_KG_NO_BYPASS_FQID_GEN
-+#define FM_KG_NO_BYPASS_PLCR_PROFILE_GEN
-+#define FM_NO_BACKUP_POOLS
-+#define FM_NO_OP_OBSERVED_POOLS
-+#define FM_NO_ADVANCED_RATE_LIMITER
-+#define FM_NO_OP_OBSERVED_CGS
-+#define FM_HAS_TOTAL_DMAS
-+#define FM_KG_NO_IPPID_SUPPORT
-+#define FM_NO_GUARANTEED_RESET_VALUES
-+#define FM_MAC_RESET
-+
-+/* FM erratas */
-+#define FM_TX_ECC_FRMS_ERRATA_10GMAC_A004
-+#define FM_TX_SHORT_FRAME_BAD_TS_ERRATA_10GMAC_A006     /* No implementation, Out of LLD scope */
-+#define FM_TX_FIFO_CORRUPTION_ERRATA_10GMAC_A007
-+#define FM_ECC_HALT_NO_SYNC_ERRATA_10GMAC_A008
-+#define FM_TX_INVALID_ECC_ERRATA_10GMAC_A009            /* Out of LLD scope, user may disable ECC exceptions using FM_DisableRamsEcc */
-+#define FM_BAD_VLAN_DETECT_ERRATA_10GMAC_A010
-+
-+#define FM_RX_PREAM_4_ERRATA_DTSEC_A001
-+#define FM_GRS_ERRATA_DTSEC_A002
-+#define FM_BAD_TX_TS_IN_B_2_B_ERRATA_DTSEC_A003
-+#define FM_GTS_ERRATA_DTSEC_A004
-+#define FM_GTS_AFTER_MAC_ABORTED_FRAME_ERRATA_DTSEC_A0012
-+#define FM_GTS_UNDERRUN_ERRATA_DTSEC_A0014
-+#define FM_GTS_AFTER_DROPPED_FRAME_ERRATA_DTSEC_A004839
-+
-+#define FM_MAGIC_PACKET_UNRECOGNIZED_ERRATA_DTSEC2          /* No implementation, Out of LLD scope */
-+#define FM_TX_LOCKUP_ERRATA_DTSEC6
-+
-+#define FM_HC_DEF_FQID_ONLY_ERRATA_FMAN_A003                /* Implemented by ucode */
-+#define FM_DEBUG_TRACE_FMAN_A004                            /* No implementation, Out of LLD scope */
-+
-+#define FM_UCODE_NOT_RESET_ERRATA_BUGZILLA6173
-+
-+#define FM_10G_REM_N_LCL_FLT_EX_10GMAC_ERRATA_SW005
-+
-+#define FM_LEN_CHECK_ERRATA_FMAN_SW002
-+
-+#define FM_NO_CTXA_COPY_ERRATA_FMAN_SW001
-+#define FM_KG_ERASE_FLOW_ID_ERRATA_FMAN_SW004
-+
-+/*****************************************************************************
-+ FM MACSEC INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define NUM_OF_RX_SC                16
-+#define NUM_OF_TX_SC                16
-+
-+#define NUM_OF_SA_PER_RX_SC         2
-+#define NUM_OF_SA_PER_TX_SC         2
-+
-+
-+#endif /* __DPAA_INTEGRATION_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/P3040_P4080_P5020/part_ext.h
-@@ -0,0 +1,83 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**************************************************************************//**
-+
-+ @File          part_ext.h
-+
-+ @Description   Definitions for the part (integration) module.
-+*//***************************************************************************/
-+
-+#ifndef __PART_EXT_H
-+#define __PART_EXT_H
-+
-+#include "std_ext.h"
-+#include "part_integration_ext.h"
-+
-+
-+#if !(defined(MPC8306) || \
-+      defined(MPC8309) || \
-+      defined(MPC834x) || \
-+      defined(MPC836x) || \
-+      defined(MPC832x) || \
-+      defined(MPC837x) || \
-+      defined(MPC8568) || \
-+      defined(MPC8569) || \
-+      defined(P1020)   || \
-+      defined(P1021)   || \
-+      defined(P1022)   || \
-+      defined(P1023)   || \
-+      defined(P2020)   || \
-+      defined(P2040)   || \
-+      defined(P3041)   || \
-+      defined(P4080)   || \
-+      defined(SC4080)  || \
-+      defined(P5020)   || \
-+      defined(MSC814x))
-+#error "unable to proceed without chip-definition"
-+#endif /* !(defined(MPC834x) || ... */
-+
-+
-+/**************************************************************************//*
-+ @Description   Part data structure - must be contained in any integration
-+                data structure.
-+*//***************************************************************************/
-+typedef struct t_Part
-+{
-+    uintptr_t   (* f_GetModuleBase)(t_Handle h_Part, e_ModuleId moduleId);
-+                /**< Returns the address of the module's memory map base. */
-+    e_ModuleId  (* f_GetModuleIdByBase)(t_Handle h_Part, uintptr_t baseAddress);
-+                /**< Returns the module's ID according to its memory map base. */
-+} t_Part;
-+
-+
-+#endif /* __PART_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/P3040_P4080_P5020/part_integration_ext.h
-@@ -0,0 +1,336 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**************************************************************************//**
-+ @File          part_integration_ext.h
-+
-+ @Description   P3040/P4080/P5020 external definitions and structures.
-+*//***************************************************************************/
-+#ifndef __PART_INTEGRATION_EXT_H
-+#define __PART_INTEGRATION_EXT_H
-+
-+#include "std_ext.h"
-+#include "dpaa_integration_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         P3040/P4080/P5020_chip_id P5020 Application Programming Interface
-+
-+ @Description   P3040/P4080/P5020 Chip functions,definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+#define CORE_E500MC
-+
-+#define INTG_MAX_NUM_OF_CORES   1
-+
-+
-+/**************************************************************************//**
-+ @Description   Module types.
-+*//***************************************************************************/
-+typedef enum e_ModuleId
-+{
-+    e_MODULE_ID_DUART_1 = 0,
-+    e_MODULE_ID_DUART_2,
-+    e_MODULE_ID_DUART_3,
-+    e_MODULE_ID_DUART_4,
-+    e_MODULE_ID_LAW,
-+    e_MODULE_ID_LBC,
-+    e_MODULE_ID_PAMU,
-+    e_MODULE_ID_QM,                 /**< Queue manager module */
-+    e_MODULE_ID_BM,                 /**< Buffer manager module */
-+    e_MODULE_ID_QM_CE_PORTAL_0,
-+    e_MODULE_ID_QM_CI_PORTAL_0,
-+    e_MODULE_ID_QM_CE_PORTAL_1,
-+    e_MODULE_ID_QM_CI_PORTAL_1,
-+    e_MODULE_ID_QM_CE_PORTAL_2,
-+    e_MODULE_ID_QM_CI_PORTAL_2,
-+    e_MODULE_ID_QM_CE_PORTAL_3,
-+    e_MODULE_ID_QM_CI_PORTAL_3,
-+    e_MODULE_ID_QM_CE_PORTAL_4,
-+    e_MODULE_ID_QM_CI_PORTAL_4,
-+    e_MODULE_ID_QM_CE_PORTAL_5,
-+    e_MODULE_ID_QM_CI_PORTAL_5,
-+    e_MODULE_ID_QM_CE_PORTAL_6,
-+    e_MODULE_ID_QM_CI_PORTAL_6,
-+    e_MODULE_ID_QM_CE_PORTAL_7,
-+    e_MODULE_ID_QM_CI_PORTAL_7,
-+    e_MODULE_ID_QM_CE_PORTAL_8,
-+    e_MODULE_ID_QM_CI_PORTAL_8,
-+    e_MODULE_ID_QM_CE_PORTAL_9,
-+    e_MODULE_ID_QM_CI_PORTAL_9,
-+    e_MODULE_ID_BM_CE_PORTAL_0,
-+    e_MODULE_ID_BM_CI_PORTAL_0,
-+    e_MODULE_ID_BM_CE_PORTAL_1,
-+    e_MODULE_ID_BM_CI_PORTAL_1,
-+    e_MODULE_ID_BM_CE_PORTAL_2,
-+    e_MODULE_ID_BM_CI_PORTAL_2,
-+    e_MODULE_ID_BM_CE_PORTAL_3,
-+    e_MODULE_ID_BM_CI_PORTAL_3,
-+    e_MODULE_ID_BM_CE_PORTAL_4,
-+    e_MODULE_ID_BM_CI_PORTAL_4,
-+    e_MODULE_ID_BM_CE_PORTAL_5,
-+    e_MODULE_ID_BM_CI_PORTAL_5,
-+    e_MODULE_ID_BM_CE_PORTAL_6,
-+    e_MODULE_ID_BM_CI_PORTAL_6,
-+    e_MODULE_ID_BM_CE_PORTAL_7,
-+    e_MODULE_ID_BM_CI_PORTAL_7,
-+    e_MODULE_ID_BM_CE_PORTAL_8,
-+    e_MODULE_ID_BM_CI_PORTAL_8,
-+    e_MODULE_ID_BM_CE_PORTAL_9,
-+    e_MODULE_ID_BM_CI_PORTAL_9,
-+    e_MODULE_ID_FM1,                /**< Frame manager #1 module */
-+    e_MODULE_ID_FM1_RTC,            /**< FM Real-Time-Clock */
-+    e_MODULE_ID_FM1_MURAM,          /**< FM Multi-User-RAM */
-+    e_MODULE_ID_FM1_BMI,            /**< FM BMI block */
-+    e_MODULE_ID_FM1_QMI,            /**< FM QMI block */
-+    e_MODULE_ID_FM1_PRS,            /**< FM parser block */
-+    e_MODULE_ID_FM1_PORT_HO0,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM1_PORT_HO1,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM1_PORT_HO2,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM1_PORT_HO3,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM1_PORT_HO4,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM1_PORT_HO5,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM1_PORT_HO6,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM1_PORT_1GRx0,     /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM1_PORT_1GRx1,     /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM1_PORT_1GRx2,     /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM1_PORT_1GRx3,     /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM1_PORT_1GRx4,     /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM1_PORT_10GRx0,    /**< FM Rx 10G MAC port block */
-+    e_MODULE_ID_FM1_PORT_1GTx0,     /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM1_PORT_1GTx1,     /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM1_PORT_1GTx2,     /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM1_PORT_1GTx3,     /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM1_PORT_1GTx4,     /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM1_PORT_10GTx0,    /**< FM Tx 10G MAC port block */
-+    e_MODULE_ID_FM1_PLCR,           /**< FM Policer */
-+    e_MODULE_ID_FM1_KG,             /**< FM Keygen */
-+    e_MODULE_ID_FM1_DMA,            /**< FM DMA */
-+    e_MODULE_ID_FM1_FPM,            /**< FM FPM */
-+    e_MODULE_ID_FM1_IRAM,           /**< FM Instruction-RAM */
-+    e_MODULE_ID_FM1_1GMDIO0,        /**< FM 1G MDIO MAC 0*/
-+    e_MODULE_ID_FM1_1GMDIO1,        /**< FM 1G MDIO MAC 1*/
-+    e_MODULE_ID_FM1_1GMDIO2,        /**< FM 1G MDIO MAC 2*/
-+    e_MODULE_ID_FM1_1GMDIO3,        /**< FM 1G MDIO MAC 3*/
-+    e_MODULE_ID_FM1_10GMDIO,        /**< FM 10G MDIO */
-+    e_MODULE_ID_FM1_PRS_IRAM,       /**< FM SW-parser Instruction-RAM */
-+    e_MODULE_ID_FM1_1GMAC0,         /**< FM 1G MAC #0 */
-+    e_MODULE_ID_FM1_1GMAC1,         /**< FM 1G MAC #1 */
-+    e_MODULE_ID_FM1_1GMAC2,         /**< FM 1G MAC #2 */
-+    e_MODULE_ID_FM1_1GMAC3,         /**< FM 1G MAC #3 */
-+    e_MODULE_ID_FM1_10GMAC0,        /**< FM 10G MAC #0 */
-+
-+    e_MODULE_ID_FM2,                /**< Frame manager #2 module */
-+    e_MODULE_ID_FM2_RTC,            /**< FM Real-Time-Clock */
-+    e_MODULE_ID_FM2_MURAM,          /**< FM Multi-User-RAM */
-+    e_MODULE_ID_FM2_BMI,            /**< FM BMI block */
-+    e_MODULE_ID_FM2_QMI,            /**< FM QMI block */
-+    e_MODULE_ID_FM2_PRS,            /**< FM parser block */
-+    e_MODULE_ID_FM2_PORT_HO0,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM2_PORT_HO1,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM2_PORT_HO2,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM2_PORT_HO3,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM2_PORT_HO4,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM2_PORT_HO5,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM2_PORT_HO6,       /**< FM Host-command/offline-parsing port block */
-+    e_MODULE_ID_FM2_PORT_1GRx0,     /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM2_PORT_1GRx1,     /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM2_PORT_1GRx2,     /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM2_PORT_1GRx3,     /**< FM Rx 1G MAC port block */
-+    e_MODULE_ID_FM2_PORT_10GRx0,    /**< FM Rx 10G MAC port block */
-+    e_MODULE_ID_FM2_PORT_1GTx0,     /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM2_PORT_1GTx1,     /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM2_PORT_1GTx2,     /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM2_PORT_1GTx3,     /**< FM Tx 1G MAC port block */
-+    e_MODULE_ID_FM2_PORT_10GTx0,    /**< FM Tx 10G MAC port block */
-+    e_MODULE_ID_FM2_PLCR,           /**< FM Policer */
-+    e_MODULE_ID_FM2_KG,             /**< FM Keygen */
-+    e_MODULE_ID_FM2_DMA,            /**< FM DMA */
-+    e_MODULE_ID_FM2_FPM,            /**< FM FPM */
-+    e_MODULE_ID_FM2_IRAM,           /**< FM Instruction-RAM */
-+    e_MODULE_ID_FM2_1GMDIO0,        /**< FM 1G MDIO MAC 0*/
-+    e_MODULE_ID_FM2_1GMDIO1,        /**< FM 1G MDIO MAC 1*/
-+    e_MODULE_ID_FM2_1GMDIO2,        /**< FM 1G MDIO MAC 2*/
-+    e_MODULE_ID_FM2_1GMDIO3,        /**< FM 1G MDIO MAC 3*/
-+    e_MODULE_ID_FM2_10GMDIO,        /**< FM 10G MDIO */
-+    e_MODULE_ID_FM2_PRS_IRAM,       /**< FM SW-parser Instruction-RAM */
-+    e_MODULE_ID_FM2_1GMAC0,         /**< FM 1G MAC #0 */
-+    e_MODULE_ID_FM2_1GMAC1,         /**< FM 1G MAC #1 */
-+    e_MODULE_ID_FM2_1GMAC2,         /**< FM 1G MAC #2 */
-+    e_MODULE_ID_FM2_1GMAC3,         /**< FM 1G MAC #3 */
-+    e_MODULE_ID_FM2_10GMAC0,        /**< FM 10G MAC #0 */
-+
-+    e_MODULE_ID_SEC_GEN,            /**< SEC 4.0 General registers      */
-+    e_MODULE_ID_SEC_QI,             /**< SEC 4.0 QI registers           */
-+    e_MODULE_ID_SEC_JQ0,            /**< SEC 4.0 JQ-0 registers         */
-+    e_MODULE_ID_SEC_JQ1,            /**< SEC 4.0 JQ-1 registers         */
-+    e_MODULE_ID_SEC_JQ2,            /**< SEC 4.0 JQ-2 registers         */
-+    e_MODULE_ID_SEC_JQ3,            /**< SEC 4.0 JQ-3 registers         */
-+    e_MODULE_ID_SEC_RTIC,           /**< SEC 4.0 RTIC registers         */
-+    e_MODULE_ID_SEC_DECO0_CCB0,     /**< SEC 4.0 DECO-0/CCB-0 registers */
-+    e_MODULE_ID_SEC_DECO1_CCB1,     /**< SEC 4.0 DECO-1/CCB-1 registers */
-+    e_MODULE_ID_SEC_DECO2_CCB2,     /**< SEC 4.0 DECO-2/CCB-2 registers */
-+    e_MODULE_ID_SEC_DECO3_CCB3,     /**< SEC 4.0 DECO-3/CCB-3 registers */
-+    e_MODULE_ID_SEC_DECO4_CCB4,     /**< SEC 4.0 DECO-4/CCB-4 registers */
-+
-+    e_MODULE_ID_MPIC,               /**< MPIC */
-+    e_MODULE_ID_GPIO,               /**< GPIO */
-+    e_MODULE_ID_SERDES,             /**< SERDES */
-+    e_MODULE_ID_CPC_1,              /**< CoreNet-Platform-Cache 1 */
-+    e_MODULE_ID_CPC_2,              /**< CoreNet-Platform-Cache 2 */
-+
-+    e_MODULE_ID_SRIO_PORTS,         /**< RapidIO controller */
-+    e_MODULE_ID_SRIO_MU,            /**< RapidIO messaging unit module */
-+
-+    e_MODULE_ID_DUMMY_LAST
-+} e_ModuleId;
-+
-+#define NUM_OF_MODULES  e_MODULE_ID_DUMMY_LAST
-+
-+#if 0 /* using unified values */
-+/*****************************************************************************
-+ INTEGRATION-SPECIFIC MODULE CODES
-+******************************************************************************/
-+#define MODULE_UNKNOWN          0x00000000
-+#define MODULE_MEM              0x00010000
-+#define MODULE_MM               0x00020000
-+#define MODULE_CORE             0x00030000
-+#define MODULE_CHIP             0x00040000
-+#define MODULE_PLTFRM           0x00050000
-+#define MODULE_PM               0x00060000
-+#define MODULE_MMU              0x00070000
-+#define MODULE_PIC              0x00080000
-+#define MODULE_CPC              0x00090000
-+#define MODULE_DUART            0x000a0000
-+#define MODULE_SERDES           0x000b0000
-+#define MODULE_PIO              0x000c0000
-+#define MODULE_QM               0x000d0000
-+#define MODULE_BM               0x000e0000
-+#define MODULE_SEC              0x000f0000
-+#define MODULE_LAW              0x00100000
-+#define MODULE_LBC              0x00110000
-+#define MODULE_PAMU             0x00120000
-+#define MODULE_FM               0x00130000
-+#define MODULE_FM_MURAM         0x00140000
-+#define MODULE_FM_PCD           0x00150000
-+#define MODULE_FM_RTC           0x00160000
-+#define MODULE_FM_MAC           0x00170000
-+#define MODULE_FM_PORT          0x00180000
-+#define MODULE_FM_SP            0x00190000
-+#define MODULE_DPA_PORT         0x001a0000
-+#define MODULE_MII              0x001b0000
-+#define MODULE_I2C              0x001c0000
-+#define MODULE_DMA              0x001d0000
-+#define MODULE_DDR              0x001e0000
-+#define MODULE_ESPI             0x001f0000
-+#define MODULE_DPAA_IPSEC       0x00200000
-+#endif /* using unified values */
-+
-+/*****************************************************************************
-+ PAMU INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define PAMU_NUM_OF_PARTITIONS  5
-+
-+#define PAMU_PICS_AVICS_ERRATA_PAMU3
-+
-+/*****************************************************************************
-+ LAW INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define LAW_NUM_OF_WINDOWS      32
-+#define LAW_MIN_WINDOW_SIZE     0x0000000000001000LL    /**< 4KB */
-+#define LAW_MAX_WINDOW_SIZE     0x0000002000000000LL    /**< 64GB */
-+
-+
-+/*****************************************************************************
-+ LBC INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+/**************************************************************************//**
-+ @Group         lbc_exception_grp LBC Exception Unit
-+
-+ @Description   LBC Exception unit API functions, definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Anchor        lbc_exbm
-+
-+ @Collection    LBC Errors Bit Mask
-+
-+                These errors are reported through the exceptions callback..
-+                The values can be or'ed in any combination in the errors mask
-+                parameter of the errors report structure.
-+
-+                These errors can also be passed as a bit-mask to
-+                LBC_EnableErrorChecking() or LBC_DisableErrorChecking(),
-+                for enabling or disabling error checking.
-+ @{
-+*//***************************************************************************/
-+#define LBC_ERR_BUS_MONITOR     0x80000000  /**< Bus monitor error */
-+#define LBC_ERR_PARITY_ECC      0x20000000  /**< Parity error for GPCM/UPM */
-+#define LBC_ERR_WRITE_PROTECT   0x04000000  /**< Write protection error */
-+#define LBC_ERR_ATOMIC_WRITE    0x00800000  /**< Atomic write error */
-+#define LBC_ERR_ATOMIC_READ     0x00400000  /**< Atomic read error */
-+#define LBC_ERR_CHIP_SELECT     0x00080000  /**< Unrecognized chip select */
-+
-+#define LBC_ERR_ALL             (LBC_ERR_BUS_MONITOR | LBC_ERR_PARITY_ECC | \
-+                                 LBC_ERR_WRITE_PROTECT | LBC_ERR_ATOMIC_WRITE | \
-+                                 LBC_ERR_ATOMIC_READ | LBC_ERR_CHIP_SELECT)
-+                                            /**< All possible errors */
-+/* @} */
-+/** @} */ /* end of lbc_exception_grp group */
-+
-+#define LBC_INCORRECT_ERROR_REPORT_ERRATA
-+
-+#define LBC_NUM_OF_BANKS            8
-+#define LBC_MAX_CS_SIZE             0x0000000100000000LL
-+#define LBC_ATOMIC_OPERATION_SUPPORT
-+#define LBC_PARITY_SUPPORT
-+#define LBC_ADDRESS_HOLD_TIME_CTRL
-+#define LBC_HIGH_CLK_DIVIDERS
-+#define LBC_FCM_AVAILABLE
-+
-+/*****************************************************************************
-+ GPIO INTEGRATION-SPECIFIC DEFINITIONS
-+******************************************************************************/
-+#define GPIO_NUM_OF_PORTS   1   /**< Number of ports in GPIO module;
-+                                     Each port contains up to 32 i/O pins. */
-+
-+#define GPIO_VALID_PIN_MASKS  \
-+    { /* Port A */ 0xFFFFFFFF }
-+
-+#define GPIO_VALID_INTR_MASKS \
-+    { /* Port A */ 0xFFFFFFFF }
-+
-+#endif /* __PART_INTEGRATION_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/math_ext.h
-@@ -0,0 +1,100 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#ifndef __MATH_EXT_H
-+#define __MATH_EXT_H
-+
-+
-+#if defined(NCSW_LINUX) && defined(__KERNEL__)
-+#include <linux/math.h>
-+#include <linux/math64.h>
-+
-+#elif defined(__MWERKS__)
-+#define LOW(x) ( sizeof(x)==8 ? *(1+(int32_t*)&x) : (*(int32_t*)&x))
-+#define HIGH(x) (*(int32_t*)&x)
-+#define ULOW(x) ( sizeof(x)==8 ? *(1+(uint32_t*)&x) : (*(uint32_t*)&x))
-+#define UHIGH(x) (*(uint32_t*)&x)
-+
-+static const double big = 1.0e300;
-+
-+/* Macro for checking if a number is a power of 2 */
-+static __inline__ double ceil(double x)
-+{
-+    int32_t i0,i1,j0; /*- cc 020130 -*/
-+    uint32_t i,j; /*- cc 020130 -*/
-+    i0 =  HIGH(x);
-+    i1 =  LOW(x);
-+    j0 = ((i0>>20)&0x7ff)-0x3ff;
-+    if(j0<20) {
-+        if(j0<0) {     /* raise inexact if x != 0 */
-+        if(big+x>0.0) {/* return 0*sign(x) if |x|<1 */
-+            if(i0<0) {i0=0x80000000;i1=0;}
-+            else if((i0|i1)!=0) { i0=0x3ff00000;i1=0;}
-+        }
-+        } else {
-+        i = (uint32_t)(0x000fffff)>>j0;
-+        if(((i0&i)|i1)==0) return x; /* x is integral */
-+        if(big+x>0.0) {    /* raise inexact flag */
-+            if(i0>0) i0 += (0x00100000)>>j0;
-+            i0 &= (~i); i1=0;
-+        }
-+        }
-+    } else if (j0>51) {
-+        if(j0==0x400) return x+x;    /* inf or NaN */
-+        else return x;        /* x is integral */
-+    } else {
-+        i = ((uint32_t)(0xffffffff))>>(j0-20); /*- cc 020130 -*/
-+        if((i1&i)==0) return x;    /* x is integral */
-+        if(big+x>0.0) {         /* raise inexact flag */
-+        if(i0>0) {
-+            if(j0==20) i0+=1;
-+            else {
-+            j = (uint32_t)(i1 + (1<<(52-j0)));
-+            if(j<i1) i0+=1;    /* got a carry */
-+            i1 = (int32_t)j;
-+            }
-+        }
-+        i1 &= (~i);
-+        }
-+    }
-+    HIGH(x) = i0;
-+    LOW(x) = i1;
-+    return x;
-+}
-+
-+#else
-+#include <math.h>
-+#endif /* defined(NCSW_LINUX) && defined(__KERNEL__) */
-+
-+
-+#endif /* __MATH_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/ncsw_ext.h
-@@ -0,0 +1,435 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          ncsw_ext.h
-+
-+ @Description   General NetCommSw Standard Definitions
-+*//***************************************************************************/
-+
-+#ifndef __NCSW_EXT_H
-+#define __NCSW_EXT_H
-+
-+
-+#include "memcpy_ext.h"
-+
-+#define WRITE_BLOCK                 IOMemSet32   /* include memcpy_ext.h */
-+#define COPY_BLOCK                  Mem2IOCpy32  /* include memcpy_ext.h */
-+
-+#define PTR_TO_UINT(_ptr)           ((uintptr_t)(_ptr))
-+#define UINT_TO_PTR(_val)           ((void*)(uintptr_t)(_val))
-+
-+#define PTR_MOVE(_ptr, _offset)     (void*)((uint8_t*)(_ptr) + (_offset))
-+
-+
-+#define WRITE_UINT8_UINT24(arg, data08, data24) \
-+    WRITE_UINT32(arg,((uint32_t)(data08)<<24)|((uint32_t)(data24)&0x00FFFFFF))
-+#define WRITE_UINT24_UINT8(arg, data24, data08) \
-+    WRITE_UINT32(arg,((uint32_t)(data24)<< 8)|((uint32_t)(data08)&0x000000FF))
-+
-+/* Little-Endian access macros */
-+
-+#define WRITE_UINT16_LE(arg, data) \
-+        WRITE_UINT16((arg), SwapUint16(data))
-+
-+#define WRITE_UINT32_LE(arg, data) \
-+        WRITE_UINT32((arg), SwapUint32(data))
-+
-+#define WRITE_UINT64_LE(arg, data) \
-+        WRITE_UINT64((arg), SwapUint64(data))
-+
-+#define GET_UINT16_LE(arg) \
-+        SwapUint16(GET_UINT16(arg))
-+
-+#define GET_UINT32_LE(arg) \
-+        SwapUint32(GET_UINT32(arg))
-+
-+#define GET_UINT64_LE(arg) \
-+        SwapUint64(GET_UINT64(arg))
-+
-+/* Write and Read again macros */
-+#define WRITE_UINT_SYNC(size, arg, data)    \
-+    do {                                    \
-+        WRITE_UINT##size((arg), (data));    \
-+        CORE_MemoryBarrier();               \
-+    } while (0)
-+
-+#define WRITE_UINT8_SYNC(arg, data)     WRITE_UINT_SYNC(8, (arg), (data))
-+
-+#define WRITE_UINT16_SYNC(arg, data)    WRITE_UINT_SYNC(16, (arg), (data))
-+#define WRITE_UINT32_SYNC(arg, data)    WRITE_UINT_SYNC(32, (arg), (data))
-+
-+#define MAKE_UINT64(high32, low32)      (((uint64_t)high32 << 32) | (low32))
-+
-+
-+/*----------------------*/
-+/* Miscellaneous macros */
-+/*----------------------*/
-+
-+#define UNUSED(_x)		((void)(_x))
-+
-+#define KILOBYTE            0x400UL                 /* 1024 */
-+#define MEGABYTE            (KILOBYTE * KILOBYTE)   /* 1024*1024 */
-+#define GIGABYTE            ((uint64_t)(KILOBYTE * MEGABYTE))   /* 1024*1024*1024 */
-+#define TERABYTE            ((uint64_t)(KILOBYTE * GIGABYTE))   /* 1024*1024*1024*1024 */
-+
-+#ifndef NO_IRQ
-+#define NO_IRQ		(0)
-+#endif
-+#define NCSW_MASTER_ID      (0)
-+
-+/* Macro for checking if a number is a power of 2 */
-+#define POWER_OF_2(n)   (!((n) & ((n)-1)))
-+
-+/* Macro for calculating log of base 2 */
-+#define LOG2(num, log2Num)      \
-+    do                          \
-+    {                           \
-+        uint64_t tmp = (num);   \
-+        log2Num = 0;            \
-+        while (tmp > 1)         \
-+        {                       \
-+            log2Num++;          \
-+            tmp >>= 1;          \
-+        }                       \
-+    } while (0)
-+
-+#define NEXT_POWER_OF_2(_num, _nextPow) \
-+do                                      \
-+{                                       \
-+    if (POWER_OF_2(_num))               \
-+        _nextPow = (_num);              \
-+    else                                \
-+    {                                   \
-+        uint64_t tmp = (_num);          \
-+        _nextPow = 1;                   \
-+        while (tmp)                     \
-+        {                               \
-+            _nextPow <<= 1;             \
-+            tmp >>= 1;                  \
-+        }                               \
-+    }                                   \
-+} while (0)
-+
-+/* Ceiling division - not the fastest way, but safer in terms of overflow */
-+#define DIV_CEIL(x,y) (div64_u64((x),(y)) + (((div64_u64((x),(y))*(y)) == (x)) ? 0 : 1))
-+
-+/* Round up a number to be a multiple of a second number */
-+#define ROUND_UP(x,y)   ((((x) + (y) - 1) / (y)) * (y))
-+
-+/* Timing macro for converting usec units to number of ticks.   */
-+/* (number of usec *  clock_Hz) / 1,000,000) - since            */
-+/* clk is in MHz units, no division needed.                     */
-+#define USEC_TO_CLK(usec,clk)       ((usec) * (clk))
-+#define CYCLES_TO_USEC(cycles,clk)  ((cycles) / (clk))
-+
-+/* Timing macros for converting between nsec units and number of clocks. */
-+#define NSEC_TO_CLK(nsec,clk)       DIV_CEIL(((nsec) * (clk)), 1000)
-+#define CYCLES_TO_NSEC(cycles,clk)  (((cycles) * 1000) / (clk))
-+
-+/* Timing macros for converting between psec units and number of clocks. */
-+#define PSEC_TO_CLK(psec,clk)       DIV_CEIL(((psec) * (clk)), 1000000)
-+#define CYCLES_TO_PSEC(cycles,clk)  (((cycles) * 1000000) / (clk))
-+
-+/* Min, Max macros */
-+#define MIN(a,b)    ((a) < (b) ? (a) : (b))
-+#define MAX(a,b)    ((a) > (b) ? (a) : (b))
-+#define IN_RANGE(min,val,max) ((min)<=(val) && (val)<=(max))
-+
-+#define ABS(a)  ((a<0)?(a*-1):a)
-+
-+#if !(defined(ARRAY_SIZE))
-+#define ARRAY_SIZE(arr)   (sizeof(arr) / sizeof((arr)[0]))
-+#endif /* !defined(ARRAY_SIZE) */
-+
-+
-+/* possible alignments */
-+#define HALF_WORD_ALIGNMENT     2
-+#define WORD_ALIGNMENT          4
-+#define DOUBLE_WORD_ALIGNMENT   8
-+#define BURST_ALIGNMENT         32
-+
-+#define HALF_WORD_ALIGNED       0x00000001
-+#define WORD_ALIGNED            0x00000003
-+#define DOUBLE_WORD_ALIGNED     0x00000007
-+#define BURST_ALIGNED           0x0000001f
-+#ifndef IS_ALIGNED
-+#define IS_ALIGNED(n,align)     (!((uint32_t)(n) & (align - 1)))
-+#endif /* IS_ALIGNED */
-+
-+
-+#define LAST_BUF        1
-+#define FIRST_BUF       2
-+#define SINGLE_BUF      (LAST_BUF | FIRST_BUF)
-+#define MIDDLE_BUF      4
-+
-+#define ARRAY_END       -1
-+
-+#define ILLEGAL_BASE    (~0)
-+
-+#define BUF_POSITION(first, last)   state[(!!(last))<<1 | !!(first)]
-+#define DECLARE_POSITION static uint8_t state[4] = { (uint8_t)MIDDLE_BUF, (uint8_t)FIRST_BUF, (uint8_t)LAST_BUF, (uint8_t)SINGLE_BUF };
-+
-+
-+/**************************************************************************//**
-+ @Description   Timers operation mode
-+*//***************************************************************************/
-+typedef enum e_TimerMode
-+{
-+    e_TIMER_MODE_INVALID = 0,
-+    e_TIMER_MODE_FREE_RUN,    /**< Free run - counter continues to increase
-+                                   after reaching the reference value. */
-+    e_TIMER_MODE_PERIODIC,    /**< Periodic - counter restarts counting from 0
-+                                   after reaching the reference value. */
-+    e_TIMER_MODE_SINGLE       /**< Single (one-shot) - counter stops counting
-+                                   after reaching the reference value. */
-+} e_TimerMode;
-+
-+
-+/**************************************************************************//**
-+ @Description   Enumeration (bit flags) of communication modes (Transmit,
-+                receive or both).
-+*//***************************************************************************/
-+typedef enum e_CommMode
-+{
-+    e_COMM_MODE_NONE        = 0,    /**< No transmit/receive communication */
-+    e_COMM_MODE_RX          = 1,    /**< Only receive communication */
-+    e_COMM_MODE_TX          = 2,    /**< Only transmit communication */
-+    e_COMM_MODE_RX_AND_TX   = 3     /**< Both transmit and receive communication */
-+} e_CommMode;
-+
-+/**************************************************************************//**
-+ @Description   General Diagnostic Mode
-+*//***************************************************************************/
-+typedef enum e_DiagMode
-+{
-+    e_DIAG_MODE_NONE = 0,       /**< Normal operation; no diagnostic mode */
-+    e_DIAG_MODE_CTRL_LOOPBACK,  /**< Loopback in the controller */
-+    e_DIAG_MODE_CHIP_LOOPBACK,  /**< Loopback in the chip but not in the
-+                                     controller; e.g. IO-pins, SerDes, etc. */
-+    e_DIAG_MODE_PHY_LOOPBACK,   /**< Loopback in the external PHY */
-+    e_DIAG_MODE_EXT_LOOPBACK,   /**< Loopback in the external line (beyond the PHY) */
-+    e_DIAG_MODE_CTRL_ECHO,      /**< Echo incoming data by the controller */
-+    e_DIAG_MODE_PHY_ECHO        /**< Echo incoming data by the PHY */
-+} e_DiagMode;
-+
-+/**************************************************************************//**
-+ @Description   Possible RxStore callback responses.
-+*//***************************************************************************/
-+typedef enum e_RxStoreResponse
-+{
-+      e_RX_STORE_RESPONSE_PAUSE     /**< Pause invoking callback with received data;
-+                                         in polling mode, start again invoking callback
-+                                         only next time user invokes the receive routine;
-+                                         in interrupt mode, start again invoking callback
-+                                         only next time a receive event triggers an interrupt;
-+                                         in all cases, received data that are pending are not
-+                                         lost, rather, their processing is temporarily deferred;
-+                                         in all cases, received data are processed in the order
-+                                         in which they were received. */
-+    , e_RX_STORE_RESPONSE_CONTINUE  /**< Continue invoking callback with received data. */
-+} e_RxStoreResponse;
-+
-+
-+/**************************************************************************//**
-+ @Description   General Handle
-+*//***************************************************************************/
-+typedef void *      t_Handle;   /**< handle, used as object's descriptor */
-+
-+/**************************************************************************//**
-+ @Description   MUTEX type
-+*//***************************************************************************/
-+typedef uint32_t    t_Mutex;
-+
-+/**************************************************************************//**
-+ @Description   Error Code.
-+
-+                The high word of the error code is the code of the software
-+                module (driver). The low word is the error type (e_ErrorType).
-+                To get the values from the error code, use GET_ERROR_TYPE()
-+                and GET_ERROR_MODULE().
-+*//***************************************************************************/
-+typedef uint32_t    t_Error;
-+
-+/**************************************************************************//**
-+ @Description   General prototype of interrupt service routine (ISR).
-+
-+ @Param[in]     handle - Optional handle of the module handling the interrupt.
-+
-+ @Return        None
-+ *//***************************************************************************/
-+typedef void (t_Isr)(t_Handle handle);
-+
-+/**************************************************************************//**
-+ @Anchor        mem_attr
-+
-+ @Collection    Memory Attributes
-+
-+                Various attributes of memory partitions. These values may be
-+                or'ed together to create a mask of all memory attributes.
-+ @{
-+*//***************************************************************************/
-+#define MEMORY_ATTR_CACHEABLE           0x00000001
-+                                        /**< Memory is cacheable */
-+#define MEMORY_ATTR_QE_2ND_BUS_ACCESS   0x00000002
-+                                        /**< Memory can be accessed by QUICC Engine
-+                                             through its secondary bus interface */
-+
-+/* @} */
-+
-+
-+/**************************************************************************//**
-+ @Function      t_GetBufFunction
-+
-+ @Description   User callback function called by driver to get data buffer.
-+
-+                User provides this function. Driver invokes it.
-+
-+ @Param[in]     h_BufferPool        - A handle to buffer pool manager
-+ @Param[out]    p_BufContextHandle  - Returns the user's private context that
-+                                      should be associated with the buffer
-+
-+ @Return        Pointer to data buffer, NULL if error
-+ *//***************************************************************************/
-+typedef uint8_t * (t_GetBufFunction)(t_Handle   h_BufferPool,
-+                                     t_Handle   *p_BufContextHandle);
-+
-+/**************************************************************************//**
-+ @Function      t_PutBufFunction
-+
-+ @Description   User callback function called by driver to return data buffer.
-+
-+                User provides this function. Driver invokes it.
-+
-+ @Param[in]     h_BufferPool    - A handle to buffer pool manager
-+ @Param[in]     p_Buffer        - A pointer to buffer to return
-+ @Param[in]     h_BufContext    - The user's private context associated with
-+                                  the returned buffer
-+
-+ @Return        E_OK on success; Error code otherwise
-+ *//***************************************************************************/
-+typedef t_Error (t_PutBufFunction)(t_Handle h_BufferPool,
-+                                   uint8_t  *p_Buffer,
-+                                   t_Handle h_BufContext);
-+
-+/**************************************************************************//**
-+ @Function      t_PhysToVirt
-+
-+ @Description   Translates a physical address to the matching virtual address.
-+
-+ @Param[in]     addr - The physical address to translate.
-+
-+ @Return        Virtual address.
-+*//***************************************************************************/
-+typedef void * t_PhysToVirt(physAddress_t addr);
-+
-+/**************************************************************************//**
-+ @Function      t_VirtToPhys
-+
-+ @Description   Translates a virtual address to the matching physical address.
-+
-+ @Param[in]     addr - The virtual address to translate.
-+
-+ @Return        Physical address.
-+*//***************************************************************************/
-+typedef physAddress_t t_VirtToPhys(void *addr);
-+
-+/**************************************************************************//**
-+ @Description   Buffer Pool Information Structure.
-+*//***************************************************************************/
-+typedef struct t_BufferPoolInfo
-+{
-+    t_Handle            h_BufferPool;   /**< A handle to the buffer pool manager */
-+    t_GetBufFunction    *f_GetBuf;      /**< User callback to get a free buffer */
-+    t_PutBufFunction    *f_PutBuf;      /**< User callback to return a buffer */
-+    uint16_t            bufferSize;     /**< Buffer size (in bytes) */
-+
-+    t_PhysToVirt        *f_PhysToVirt;  /**< User callback to translate pool buffers
-+                                             physical addresses to virtual addresses  */
-+    t_VirtToPhys        *f_VirtToPhys;  /**< User callback to translate pool buffers
-+                                             virtual addresses to physical addresses */
-+} t_BufferPoolInfo;
-+
-+
-+/**************************************************************************//**
-+ @Description   User callback function called by driver when transmit completed.
-+
-+                User provides this function. Driver invokes it.
-+
-+ @Param[in]     h_App           - Application's handle, as was provided to the
-+                                  driver by the user
-+ @Param[in]     queueId         - Transmit queue ID
-+ @Param[in]     p_Data          - Pointer to the data buffer
-+ @Param[in]     h_BufContext    - The user's private context associated with
-+                                  the given data buffer
-+ @Param[in]     status          - Transmit status and errors
-+ @Param[in]     flags           - Driver-dependent information
-+ *//***************************************************************************/
-+typedef void (t_TxConfFunction)(t_Handle    h_App,
-+                                uint32_t    queueId,
-+                                uint8_t     *p_Data,
-+                                t_Handle    h_BufContext,
-+                                uint16_t    status,
-+                                uint32_t    flags);
-+
-+/**************************************************************************//**
-+ @Description   User callback function called by driver with receive data.
-+
-+                User provides this function. Driver invokes it.
-+
-+ @Param[in]     h_App           - Application's handle, as was provided to the
-+                                  driver by the user
-+ @Param[in]     queueId         - Receive queue ID
-+ @Param[in]     p_Data          - Pointer to the buffer with received data
-+ @Param[in]     h_BufContext    - The user's private context associated with
-+                                  the given data buffer
-+ @Param[in]     length          - Length of received data
-+ @Param[in]     status          - Receive status and errors
-+ @Param[in]     position        - Position of buffer in frame
-+ @Param[in]     flags           - Driver-dependent information
-+
-+ @Retval        e_RX_STORE_RESPONSE_CONTINUE - order the driver to continue Rx
-+                                               operation for all ready data.
-+ @Retval        e_RX_STORE_RESPONSE_PAUSE    - order the driver to stop Rx operation.
-+ *//***************************************************************************/
-+typedef e_RxStoreResponse (t_RxStoreFunction)(t_Handle  h_App,
-+                                              uint32_t  queueId,
-+                                              uint8_t   *p_Data,
-+                                              t_Handle  h_BufContext,
-+                                              uint32_t  length,
-+                                              uint16_t  status,
-+                                              uint8_t   position,
-+                                              uint32_t  flags);
-+
-+
-+#endif /* __NCSW_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/net_ext.h
-@@ -0,0 +1,430 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          net_ext.h
-+
-+ @Description   This file contains common and general netcomm headers definitions.
-+*//***************************************************************************/
-+#ifndef __NET_EXT_H
-+#define __NET_EXT_H
-+
-+#include "std_ext.h"
-+
-+
-+typedef uint8_t headerFieldPpp_t;
-+
-+#define NET_HEADER_FIELD_PPP_PID                        (1)
-+#define NET_HEADER_FIELD_PPP_COMPRESSED                 (NET_HEADER_FIELD_PPP_PID << 1)
-+#define NET_HEADER_FIELD_PPP_ALL_FIELDS                 ((NET_HEADER_FIELD_PPP_PID << 2) - 1)
-+
-+
-+typedef uint8_t headerFieldPppoe_t;
-+
-+#define NET_HEADER_FIELD_PPPoE_VER                      (1)
-+#define NET_HEADER_FIELD_PPPoE_TYPE                     (NET_HEADER_FIELD_PPPoE_VER << 1)
-+#define NET_HEADER_FIELD_PPPoE_CODE                     (NET_HEADER_FIELD_PPPoE_VER << 2)
-+#define NET_HEADER_FIELD_PPPoE_SID                      (NET_HEADER_FIELD_PPPoE_VER << 3)
-+#define NET_HEADER_FIELD_PPPoE_LEN                      (NET_HEADER_FIELD_PPPoE_VER << 4)
-+#define NET_HEADER_FIELD_PPPoE_SESSION                  (NET_HEADER_FIELD_PPPoE_VER << 5)
-+#define NET_HEADER_FIELD_PPPoE_PID                      (NET_HEADER_FIELD_PPPoE_VER << 6)
-+#define NET_HEADER_FIELD_PPPoE_ALL_FIELDS               ((NET_HEADER_FIELD_PPPoE_VER << 7) - 1)
-+
-+#define NET_HEADER_FIELD_PPPMUX_PID                     (1)
-+#define NET_HEADER_FIELD_PPPMUX_CKSUM                   (NET_HEADER_FIELD_PPPMUX_PID << 1)
-+#define NET_HEADER_FIELD_PPPMUX_COMPRESSED              (NET_HEADER_FIELD_PPPMUX_PID << 2)
-+#define NET_HEADER_FIELD_PPPMUX_ALL_FIELDS              ((NET_HEADER_FIELD_PPPMUX_PID << 3) - 1)
-+
-+#define NET_HEADER_FIELD_PPPMUX_SUBFRAME_PFF            (1)
-+#define NET_HEADER_FIELD_PPPMUX_SUBFRAME_LXT            (NET_HEADER_FIELD_PPPMUX_SUBFRAME_PFF << 1)
-+#define NET_HEADER_FIELD_PPPMUX_SUBFRAME_LEN            (NET_HEADER_FIELD_PPPMUX_SUBFRAME_PFF << 2)
-+#define NET_HEADER_FIELD_PPPMUX_SUBFRAME_PID            (NET_HEADER_FIELD_PPPMUX_SUBFRAME_PFF << 3)
-+#define NET_HEADER_FIELD_PPPMUX_SUBFRAME_USE_PID        (NET_HEADER_FIELD_PPPMUX_SUBFRAME_PFF << 4)
-+#define NET_HEADER_FIELD_PPPMUX_SUBFRAME_ALL_FIELDS     ((NET_HEADER_FIELD_PPPMUX_SUBFRAME_PFF << 5) - 1)
-+
-+
-+typedef uint8_t headerFieldEth_t;
-+
-+#define NET_HEADER_FIELD_ETH_DA                         (1)
-+#define NET_HEADER_FIELD_ETH_SA                         (NET_HEADER_FIELD_ETH_DA << 1)
-+#define NET_HEADER_FIELD_ETH_LENGTH                     (NET_HEADER_FIELD_ETH_DA << 2)
-+#define NET_HEADER_FIELD_ETH_TYPE                       (NET_HEADER_FIELD_ETH_DA << 3)
-+#define NET_HEADER_FIELD_ETH_FINAL_CKSUM                (NET_HEADER_FIELD_ETH_DA << 4)
-+#define NET_HEADER_FIELD_ETH_PADDING                    (NET_HEADER_FIELD_ETH_DA << 5)
-+#define NET_HEADER_FIELD_ETH_ALL_FIELDS                 ((NET_HEADER_FIELD_ETH_DA << 6) - 1)
-+
-+#define NET_HEADER_FIELD_ETH_ADDR_SIZE                 6
-+
-+typedef uint16_t headerFieldIp_t;
-+
-+#define NET_HEADER_FIELD_IP_VER                         (1)
-+#define NET_HEADER_FIELD_IP_DSCP                        (NET_HEADER_FIELD_IP_VER << 2)
-+#define NET_HEADER_FIELD_IP_ECN                         (NET_HEADER_FIELD_IP_VER << 3)
-+#define NET_HEADER_FIELD_IP_PROTO                       (NET_HEADER_FIELD_IP_VER << 4)
-+
-+#define NET_HEADER_FIELD_IP_PROTO_SIZE                  1
-+
-+typedef uint16_t headerFieldIpv4_t;
-+
-+#define NET_HEADER_FIELD_IPv4_VER                       (1)
-+#define NET_HEADER_FIELD_IPv4_HDR_LEN                   (NET_HEADER_FIELD_IPv4_VER << 1)
-+#define NET_HEADER_FIELD_IPv4_TOS                       (NET_HEADER_FIELD_IPv4_VER << 2)
-+#define NET_HEADER_FIELD_IPv4_TOTAL_LEN                 (NET_HEADER_FIELD_IPv4_VER << 3)
-+#define NET_HEADER_FIELD_IPv4_ID                        (NET_HEADER_FIELD_IPv4_VER << 4)
-+#define NET_HEADER_FIELD_IPv4_FLAG_D                    (NET_HEADER_FIELD_IPv4_VER << 5)
-+#define NET_HEADER_FIELD_IPv4_FLAG_M                    (NET_HEADER_FIELD_IPv4_VER << 6)
-+#define NET_HEADER_FIELD_IPv4_OFFSET                    (NET_HEADER_FIELD_IPv4_VER << 7)
-+#define NET_HEADER_FIELD_IPv4_TTL                       (NET_HEADER_FIELD_IPv4_VER << 8)
-+#define NET_HEADER_FIELD_IPv4_PROTO                     (NET_HEADER_FIELD_IPv4_VER << 9)
-+#define NET_HEADER_FIELD_IPv4_CKSUM                     (NET_HEADER_FIELD_IPv4_VER << 10)
-+#define NET_HEADER_FIELD_IPv4_SRC_IP                    (NET_HEADER_FIELD_IPv4_VER << 11)
-+#define NET_HEADER_FIELD_IPv4_DST_IP                    (NET_HEADER_FIELD_IPv4_VER << 12)
-+#define NET_HEADER_FIELD_IPv4_OPTS                      (NET_HEADER_FIELD_IPv4_VER << 13)
-+#define NET_HEADER_FIELD_IPv4_OPTS_COUNT                (NET_HEADER_FIELD_IPv4_VER << 14)
-+#define NET_HEADER_FIELD_IPv4_ALL_FIELDS                ((NET_HEADER_FIELD_IPv4_VER << 15) - 1)
-+
-+#define NET_HEADER_FIELD_IPv4_ADDR_SIZE                 4
-+#define NET_HEADER_FIELD_IPv4_PROTO_SIZE                1
-+
-+
-+typedef uint8_t headerFieldIpv6_t;
-+
-+#define NET_HEADER_FIELD_IPv6_VER                       (1)
-+#define NET_HEADER_FIELD_IPv6_TC                        (NET_HEADER_FIELD_IPv6_VER << 1)
-+#define NET_HEADER_FIELD_IPv6_SRC_IP                    (NET_HEADER_FIELD_IPv6_VER << 2)
-+#define NET_HEADER_FIELD_IPv6_DST_IP                    (NET_HEADER_FIELD_IPv6_VER << 3)
-+#define NET_HEADER_FIELD_IPv6_NEXT_HDR                  (NET_HEADER_FIELD_IPv6_VER << 4)
-+#define NET_HEADER_FIELD_IPv6_FL                        (NET_HEADER_FIELD_IPv6_VER << 5)
-+#define NET_HEADER_FIELD_IPv6_HOP_LIMIT                 (NET_HEADER_FIELD_IPv6_VER << 6)
-+#define NET_HEADER_FIELD_IPv6_ALL_FIELDS                ((NET_HEADER_FIELD_IPv6_VER << 7) - 1)
-+
-+#define NET_HEADER_FIELD_IPv6_ADDR_SIZE                 16
-+#define NET_HEADER_FIELD_IPv6_NEXT_HDR_SIZE             1
-+
-+#define NET_HEADER_FIELD_ICMP_TYPE                      (1)
-+#define NET_HEADER_FIELD_ICMP_CODE                      (NET_HEADER_FIELD_ICMP_TYPE << 1)
-+#define NET_HEADER_FIELD_ICMP_CKSUM                     (NET_HEADER_FIELD_ICMP_TYPE << 2)
-+#define NET_HEADER_FIELD_ICMP_ID                        (NET_HEADER_FIELD_ICMP_TYPE << 3)
-+#define NET_HEADER_FIELD_ICMP_SQ_NUM                    (NET_HEADER_FIELD_ICMP_TYPE << 4)
-+#define NET_HEADER_FIELD_ICMP_ALL_FIELDS                ((NET_HEADER_FIELD_ICMP_TYPE << 5) - 1)
-+
-+#define NET_HEADER_FIELD_ICMP_CODE_SIZE                 1
-+#define NET_HEADER_FIELD_ICMP_TYPE_SIZE                 1
-+
-+#define NET_HEADER_FIELD_IGMP_VERSION                   (1)
-+#define NET_HEADER_FIELD_IGMP_TYPE                      (NET_HEADER_FIELD_IGMP_VERSION << 1)
-+#define NET_HEADER_FIELD_IGMP_CKSUM                     (NET_HEADER_FIELD_IGMP_VERSION << 2)
-+#define NET_HEADER_FIELD_IGMP_DATA                      (NET_HEADER_FIELD_IGMP_VERSION << 3)
-+#define NET_HEADER_FIELD_IGMP_ALL_FIELDS                ((NET_HEADER_FIELD_IGMP_VERSION << 4) - 1)
-+
-+
-+typedef uint16_t headerFieldTcp_t;
-+
-+#define NET_HEADER_FIELD_TCP_PORT_SRC                   (1)
-+#define NET_HEADER_FIELD_TCP_PORT_DST                   (NET_HEADER_FIELD_TCP_PORT_SRC << 1)
-+#define NET_HEADER_FIELD_TCP_SEQ                        (NET_HEADER_FIELD_TCP_PORT_SRC << 2)
-+#define NET_HEADER_FIELD_TCP_ACK                        (NET_HEADER_FIELD_TCP_PORT_SRC << 3)
-+#define NET_HEADER_FIELD_TCP_OFFSET                     (NET_HEADER_FIELD_TCP_PORT_SRC << 4)
-+#define NET_HEADER_FIELD_TCP_FLAGS                      (NET_HEADER_FIELD_TCP_PORT_SRC << 5)
-+#define NET_HEADER_FIELD_TCP_WINDOW                     (NET_HEADER_FIELD_TCP_PORT_SRC << 6)
-+#define NET_HEADER_FIELD_TCP_CKSUM                      (NET_HEADER_FIELD_TCP_PORT_SRC << 7)
-+#define NET_HEADER_FIELD_TCP_URGPTR                     (NET_HEADER_FIELD_TCP_PORT_SRC << 8)
-+#define NET_HEADER_FIELD_TCP_OPTS                       (NET_HEADER_FIELD_TCP_PORT_SRC << 9)
-+#define NET_HEADER_FIELD_TCP_OPTS_COUNT                 (NET_HEADER_FIELD_TCP_PORT_SRC << 10)
-+#define NET_HEADER_FIELD_TCP_ALL_FIELDS                 ((NET_HEADER_FIELD_TCP_PORT_SRC << 11) - 1)
-+
-+#define NET_HEADER_FIELD_TCP_PORT_SIZE                  2
-+
-+
-+typedef uint8_t headerFieldSctp_t;
-+
-+#define NET_HEADER_FIELD_SCTP_PORT_SRC                  (1)
-+#define NET_HEADER_FIELD_SCTP_PORT_DST                  (NET_HEADER_FIELD_SCTP_PORT_SRC << 1)
-+#define NET_HEADER_FIELD_SCTP_VER_TAG                   (NET_HEADER_FIELD_SCTP_PORT_SRC << 2)
-+#define NET_HEADER_FIELD_SCTP_CKSUM                     (NET_HEADER_FIELD_SCTP_PORT_SRC << 3)
-+#define NET_HEADER_FIELD_SCTP_ALL_FIELDS                ((NET_HEADER_FIELD_SCTP_PORT_SRC << 4) - 1)
-+
-+#define NET_HEADER_FIELD_SCTP_PORT_SIZE                 2
-+
-+typedef uint8_t headerFieldDccp_t;
-+
-+#define NET_HEADER_FIELD_DCCP_PORT_SRC                  (1)
-+#define NET_HEADER_FIELD_DCCP_PORT_DST                  (NET_HEADER_FIELD_DCCP_PORT_SRC << 1)
-+#define NET_HEADER_FIELD_DCCP_ALL_FIELDS                ((NET_HEADER_FIELD_DCCP_PORT_SRC << 2) - 1)
-+
-+#define NET_HEADER_FIELD_DCCP_PORT_SIZE                 2
-+
-+
-+typedef uint8_t headerFieldUdp_t;
-+
-+#define NET_HEADER_FIELD_UDP_PORT_SRC                   (1)
-+#define NET_HEADER_FIELD_UDP_PORT_DST                   (NET_HEADER_FIELD_UDP_PORT_SRC << 1)
-+#define NET_HEADER_FIELD_UDP_LEN                        (NET_HEADER_FIELD_UDP_PORT_SRC << 2)
-+#define NET_HEADER_FIELD_UDP_CKSUM                      (NET_HEADER_FIELD_UDP_PORT_SRC << 3)
-+#define NET_HEADER_FIELD_UDP_ALL_FIELDS                 ((NET_HEADER_FIELD_UDP_PORT_SRC << 4) - 1)
-+
-+#define NET_HEADER_FIELD_UDP_PORT_SIZE                  2
-+
-+typedef uint8_t headerFieldUdpLite_t;
-+
-+#define NET_HEADER_FIELD_UDP_LITE_PORT_SRC              (1)
-+#define NET_HEADER_FIELD_UDP_LITE_PORT_DST              (NET_HEADER_FIELD_UDP_LITE_PORT_SRC << 1)
-+#define NET_HEADER_FIELD_UDP_LITE_ALL_FIELDS            ((NET_HEADER_FIELD_UDP_LITE_PORT_SRC << 2) - 1)
-+
-+#define NET_HEADER_FIELD_UDP_LITE_PORT_SIZE             2
-+
-+typedef uint8_t headerFieldUdpEncapEsp_t;
-+
-+#define NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC         (1)
-+#define NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_DST         (NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC << 1)
-+#define NET_HEADER_FIELD_UDP_ENCAP_ESP_LEN              (NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC << 2)
-+#define NET_HEADER_FIELD_UDP_ENCAP_ESP_CKSUM            (NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC << 3)
-+#define NET_HEADER_FIELD_UDP_ENCAP_ESP_SPI              (NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC << 4)
-+#define NET_HEADER_FIELD_UDP_ENCAP_ESP_SEQUENCE_NUM     (NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC << 5)
-+#define NET_HEADER_FIELD_UDP_ENCAP_ESP_ALL_FIELDS       ((NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC << 6) - 1)
-+
-+#define NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SIZE        2
-+#define NET_HEADER_FIELD_UDP_ENCAP_ESP_SPI_SIZE         4
-+
-+#define NET_HEADER_FIELD_IPHC_CID                       (1)
-+#define NET_HEADER_FIELD_IPHC_CID_TYPE                  (NET_HEADER_FIELD_IPHC_CID << 1)
-+#define NET_HEADER_FIELD_IPHC_HCINDEX                   (NET_HEADER_FIELD_IPHC_CID << 2)
-+#define NET_HEADER_FIELD_IPHC_GEN                       (NET_HEADER_FIELD_IPHC_CID << 3)
-+#define NET_HEADER_FIELD_IPHC_D_BIT                     (NET_HEADER_FIELD_IPHC_CID << 4)
-+#define NET_HEADER_FIELD_IPHC_ALL_FIELDS                ((NET_HEADER_FIELD_IPHC_CID << 5) - 1)
-+
-+#define NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE           (1)
-+#define NET_HEADER_FIELD_SCTP_CHUNK_DATA_FLAGS          (NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 1)
-+#define NET_HEADER_FIELD_SCTP_CHUNK_DATA_LENGTH         (NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 2)
-+#define NET_HEADER_FIELD_SCTP_CHUNK_DATA_TSN            (NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 3)
-+#define NET_HEADER_FIELD_SCTP_CHUNK_DATA_STREAM_ID      (NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 4)
-+#define NET_HEADER_FIELD_SCTP_CHUNK_DATA_STREAM_SQN     (NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 5)
-+#define NET_HEADER_FIELD_SCTP_CHUNK_DATA_PAYLOAD_PID    (NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 6)
-+#define NET_HEADER_FIELD_SCTP_CHUNK_DATA_UNORDERED      (NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 7)
-+#define NET_HEADER_FIELD_SCTP_CHUNK_DATA_BEGGINING      (NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 8)
-+#define NET_HEADER_FIELD_SCTP_CHUNK_DATA_END            (NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 9)
-+#define NET_HEADER_FIELD_SCTP_CHUNK_DATA_ALL_FIELDS     ((NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 10) - 1)
-+
-+#define NET_HEADER_FIELD_L2TPv2_TYPE_BIT                (1)
-+#define NET_HEADER_FIELD_L2TPv2_LENGTH_BIT              (NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 1)
-+#define NET_HEADER_FIELD_L2TPv2_SEQUENCE_BIT            (NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 2)
-+#define NET_HEADER_FIELD_L2TPv2_OFFSET_BIT              (NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 3)
-+#define NET_HEADER_FIELD_L2TPv2_PRIORITY_BIT            (NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 4)
-+#define NET_HEADER_FIELD_L2TPv2_VERSION                 (NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 5)
-+#define NET_HEADER_FIELD_L2TPv2_LEN                     (NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 6)
-+#define NET_HEADER_FIELD_L2TPv2_TUNNEL_ID               (NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 7)
-+#define NET_HEADER_FIELD_L2TPv2_SESSION_ID              (NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 8)
-+#define NET_HEADER_FIELD_L2TPv2_NS                      (NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 9)
-+#define NET_HEADER_FIELD_L2TPv2_NR                      (NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 10)
-+#define NET_HEADER_FIELD_L2TPv2_OFFSET_SIZE             (NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 11)
-+#define NET_HEADER_FIELD_L2TPv2_FIRST_BYTE              (NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 12)
-+#define NET_HEADER_FIELD_L2TPv2_ALL_FIELDS              ((NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 13) - 1)
-+
-+#define NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT           (1)
-+#define NET_HEADER_FIELD_L2TPv3_CTRL_LENGTH_BIT         (NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 1)
-+#define NET_HEADER_FIELD_L2TPv3_CTRL_SEQUENCE_BIT       (NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 2)
-+#define NET_HEADER_FIELD_L2TPv3_CTRL_VERSION            (NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 3)
-+#define NET_HEADER_FIELD_L2TPv3_CTRL_LENGTH             (NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 4)
-+#define NET_HEADER_FIELD_L2TPv3_CTRL_CONTROL            (NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 5)
-+#define NET_HEADER_FIELD_L2TPv3_CTRL_SENT               (NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 6)
-+#define NET_HEADER_FIELD_L2TPv3_CTRL_RECV               (NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 7)
-+#define NET_HEADER_FIELD_L2TPv3_CTRL_FIRST_BYTE         (NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 8)
-+#define NET_HEADER_FIELD_L2TPv3_CTRL_ALL_FIELDS         ((NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 9) - 1)
-+
-+#define NET_HEADER_FIELD_L2TPv3_SESS_TYPE_BIT           (1)
-+#define NET_HEADER_FIELD_L2TPv3_SESS_VERSION            (NET_HEADER_FIELD_L2TPv3_SESS_TYPE_BIT << 1)
-+#define NET_HEADER_FIELD_L2TPv3_SESS_ID                 (NET_HEADER_FIELD_L2TPv3_SESS_TYPE_BIT << 2)
-+#define NET_HEADER_FIELD_L2TPv3_SESS_COOKIE             (NET_HEADER_FIELD_L2TPv3_SESS_TYPE_BIT << 3)
-+#define NET_HEADER_FIELD_L2TPv3_SESS_ALL_FIELDS         ((NET_HEADER_FIELD_L2TPv3_SESS_TYPE_BIT << 4) - 1)
-+
-+
-+typedef uint8_t headerFieldVlan_t;
-+
-+#define NET_HEADER_FIELD_VLAN_VPRI                      (1)
-+#define NET_HEADER_FIELD_VLAN_CFI                       (NET_HEADER_FIELD_VLAN_VPRI << 1)
-+#define NET_HEADER_FIELD_VLAN_VID                       (NET_HEADER_FIELD_VLAN_VPRI << 2)
-+#define NET_HEADER_FIELD_VLAN_LENGTH                    (NET_HEADER_FIELD_VLAN_VPRI << 3)
-+#define NET_HEADER_FIELD_VLAN_TYPE                      (NET_HEADER_FIELD_VLAN_VPRI << 4)
-+#define NET_HEADER_FIELD_VLAN_ALL_FIELDS                ((NET_HEADER_FIELD_VLAN_VPRI << 5) - 1)
-+
-+#define NET_HEADER_FIELD_VLAN_TCI                       (NET_HEADER_FIELD_VLAN_VPRI | \
-+                                                         NET_HEADER_FIELD_VLAN_CFI | \
-+                                                         NET_HEADER_FIELD_VLAN_VID)
-+
-+
-+typedef uint8_t headerFieldLlc_t;
-+
-+#define NET_HEADER_FIELD_LLC_DSAP                       (1)
-+#define NET_HEADER_FIELD_LLC_SSAP                       (NET_HEADER_FIELD_LLC_DSAP << 1)
-+#define NET_HEADER_FIELD_LLC_CTRL                       (NET_HEADER_FIELD_LLC_DSAP << 2)
-+#define NET_HEADER_FIELD_LLC_ALL_FIELDS                 ((NET_HEADER_FIELD_LLC_DSAP << 3) - 1)
-+
-+#define NET_HEADER_FIELD_NLPID_NLPID                    (1)
-+#define NET_HEADER_FIELD_NLPID_ALL_FIELDS               ((NET_HEADER_FIELD_NLPID_NLPID << 1) - 1)
-+
-+
-+typedef uint8_t headerFieldSnap_t;
-+
-+#define NET_HEADER_FIELD_SNAP_OUI                       (1)
-+#define NET_HEADER_FIELD_SNAP_PID                       (NET_HEADER_FIELD_SNAP_OUI << 1)
-+#define NET_HEADER_FIELD_SNAP_ALL_FIELDS                ((NET_HEADER_FIELD_SNAP_OUI << 2) - 1)
-+
-+
-+typedef uint8_t headerFieldLlcSnap_t;
-+
-+#define NET_HEADER_FIELD_LLC_SNAP_TYPE                  (1)
-+#define NET_HEADER_FIELD_LLC_SNAP_ALL_FIELDS            ((NET_HEADER_FIELD_LLC_SNAP_TYPE << 1) - 1)
-+
-+#define NET_HEADER_FIELD_ARP_HTYPE                      (1)
-+#define NET_HEADER_FIELD_ARP_PTYPE                      (NET_HEADER_FIELD_ARP_HTYPE << 1)
-+#define NET_HEADER_FIELD_ARP_HLEN                       (NET_HEADER_FIELD_ARP_HTYPE << 2)
-+#define NET_HEADER_FIELD_ARP_PLEN                       (NET_HEADER_FIELD_ARP_HTYPE << 3)
-+#define NET_HEADER_FIELD_ARP_OPER                       (NET_HEADER_FIELD_ARP_HTYPE << 4)
-+#define NET_HEADER_FIELD_ARP_SHA                        (NET_HEADER_FIELD_ARP_HTYPE << 5)
-+#define NET_HEADER_FIELD_ARP_SPA                        (NET_HEADER_FIELD_ARP_HTYPE << 6)
-+#define NET_HEADER_FIELD_ARP_THA                        (NET_HEADER_FIELD_ARP_HTYPE << 7)
-+#define NET_HEADER_FIELD_ARP_TPA                        (NET_HEADER_FIELD_ARP_HTYPE << 8)
-+#define NET_HEADER_FIELD_ARP_ALL_FIELDS                 ((NET_HEADER_FIELD_ARP_HTYPE << 9) - 1)
-+
-+#define NET_HEADER_FIELD_RFC2684_LLC                    (1)
-+#define NET_HEADER_FIELD_RFC2684_NLPID                  (NET_HEADER_FIELD_RFC2684_LLC << 1)
-+#define NET_HEADER_FIELD_RFC2684_OUI                    (NET_HEADER_FIELD_RFC2684_LLC << 2)
-+#define NET_HEADER_FIELD_RFC2684_PID                    (NET_HEADER_FIELD_RFC2684_LLC << 3)
-+#define NET_HEADER_FIELD_RFC2684_VPN_OUI                (NET_HEADER_FIELD_RFC2684_LLC << 4)
-+#define NET_HEADER_FIELD_RFC2684_VPN_IDX                (NET_HEADER_FIELD_RFC2684_LLC << 5)
-+#define NET_HEADER_FIELD_RFC2684_ALL_FIELDS             ((NET_HEADER_FIELD_RFC2684_LLC << 6) - 1)
-+
-+#define NET_HEADER_FIELD_USER_DEFINED_SRCPORT           (1)
-+#define NET_HEADER_FIELD_USER_DEFINED_PCDID             (NET_HEADER_FIELD_USER_DEFINED_SRCPORT << 1)
-+#define NET_HEADER_FIELD_USER_DEFINED_ALL_FIELDS        ((NET_HEADER_FIELD_USER_DEFINED_SRCPORT << 2) - 1)
-+
-+#define NET_HEADER_FIELD_PAYLOAD_BUFFER                 (1)
-+#define NET_HEADER_FIELD_PAYLOAD_SIZE                   (NET_HEADER_FIELD_PAYLOAD_BUFFER << 1)
-+#define NET_HEADER_FIELD_MAX_FRM_SIZE                   (NET_HEADER_FIELD_PAYLOAD_BUFFER << 2)
-+#define NET_HEADER_FIELD_MIN_FRM_SIZE                   (NET_HEADER_FIELD_PAYLOAD_BUFFER << 3)
-+#define NET_HEADER_FIELD_PAYLOAD_TYPE                   (NET_HEADER_FIELD_PAYLOAD_BUFFER << 4)
-+#define NET_HEADER_FIELD_FRAME_SIZE                     (NET_HEADER_FIELD_PAYLOAD_BUFFER << 5)
-+#define NET_HEADER_FIELD_PAYLOAD_ALL_FIELDS             ((NET_HEADER_FIELD_PAYLOAD_BUFFER << 6) - 1)
-+
-+
-+typedef uint8_t headerFieldGre_t;
-+
-+#define NET_HEADER_FIELD_GRE_TYPE                       (1)
-+#define NET_HEADER_FIELD_GRE_ALL_FIELDS                 ((NET_HEADER_FIELD_GRE_TYPE << 1) - 1)
-+
-+
-+typedef uint8_t headerFieldMinencap_t;
-+
-+#define NET_HEADER_FIELD_MINENCAP_SRC_IP                (1)
-+#define NET_HEADER_FIELD_MINENCAP_DST_IP                (NET_HEADER_FIELD_MINENCAP_SRC_IP << 1)
-+#define NET_HEADER_FIELD_MINENCAP_TYPE                  (NET_HEADER_FIELD_MINENCAP_SRC_IP << 2)
-+#define NET_HEADER_FIELD_MINENCAP_ALL_FIELDS            ((NET_HEADER_FIELD_MINENCAP_SRC_IP << 3) - 1)
-+
-+
-+typedef uint8_t headerFieldIpsecAh_t;
-+
-+#define NET_HEADER_FIELD_IPSEC_AH_SPI                   (1)
-+#define NET_HEADER_FIELD_IPSEC_AH_NH                    (NET_HEADER_FIELD_IPSEC_AH_SPI << 1)
-+#define NET_HEADER_FIELD_IPSEC_AH_ALL_FIELDS            ((NET_HEADER_FIELD_IPSEC_AH_SPI << 2) - 1)
-+
-+
-+typedef uint8_t headerFieldIpsecEsp_t;
-+
-+#define NET_HEADER_FIELD_IPSEC_ESP_SPI                  (1)
-+#define NET_HEADER_FIELD_IPSEC_ESP_SEQUENCE_NUM         (NET_HEADER_FIELD_IPSEC_ESP_SPI << 1)
-+#define NET_HEADER_FIELD_IPSEC_ESP_ALL_FIELDS           ((NET_HEADER_FIELD_IPSEC_ESP_SPI << 2) - 1)
-+
-+#define NET_HEADER_FIELD_IPSEC_ESP_SPI_SIZE             4
-+
-+
-+typedef uint8_t headerFieldMpls_t;
-+
-+#define NET_HEADER_FIELD_MPLS_LABEL_STACK               (1)
-+#define NET_HEADER_FIELD_MPLS_LABEL_STACK_ALL_FIELDS    ((NET_HEADER_FIELD_MPLS_LABEL_STACK << 1) - 1)
-+
-+
-+typedef uint8_t headerFieldMacsec_t;
-+
-+#define NET_HEADER_FIELD_MACSEC_SECTAG                  (1)
-+#define NET_HEADER_FIELD_MACSEC_ALL_FIELDS              ((NET_HEADER_FIELD_MACSEC_SECTAG << 1) - 1)
-+
-+
-+typedef enum {
-+    HEADER_TYPE_NONE = 0,
-+    HEADER_TYPE_PAYLOAD,
-+    HEADER_TYPE_ETH,
-+    HEADER_TYPE_VLAN,
-+    HEADER_TYPE_IPv4,
-+    HEADER_TYPE_IPv6,
-+    HEADER_TYPE_IP,
-+    HEADER_TYPE_TCP,
-+    HEADER_TYPE_UDP,
-+    HEADER_TYPE_UDP_LITE,
-+    HEADER_TYPE_IPHC,
-+    HEADER_TYPE_SCTP,
-+    HEADER_TYPE_SCTP_CHUNK_DATA,
-+    HEADER_TYPE_PPPoE,
-+    HEADER_TYPE_PPP,
-+    HEADER_TYPE_PPPMUX,
-+    HEADER_TYPE_PPPMUX_SUBFRAME,
-+    HEADER_TYPE_L2TPv2,
-+    HEADER_TYPE_L2TPv3_CTRL,
-+    HEADER_TYPE_L2TPv3_SESS,
-+    HEADER_TYPE_LLC,
-+    HEADER_TYPE_LLC_SNAP,
-+    HEADER_TYPE_NLPID,
-+    HEADER_TYPE_SNAP,
-+    HEADER_TYPE_MPLS,
-+    HEADER_TYPE_IPSEC_AH,
-+    HEADER_TYPE_IPSEC_ESP,
-+    HEADER_TYPE_UDP_ENCAP_ESP, /* RFC 3948 */
-+    HEADER_TYPE_MACSEC,
-+    HEADER_TYPE_GRE,
-+    HEADER_TYPE_MINENCAP,
-+    HEADER_TYPE_DCCP,
-+    HEADER_TYPE_ICMP,
-+    HEADER_TYPE_IGMP,
-+    HEADER_TYPE_ARP,
-+    HEADER_TYPE_CAPWAP,
-+    HEADER_TYPE_CAPWAP_DTLS,
-+    HEADER_TYPE_RFC2684,
-+    HEADER_TYPE_USER_DEFINED_L2,
-+    HEADER_TYPE_USER_DEFINED_L3,
-+    HEADER_TYPE_USER_DEFINED_L4,
-+    HEADER_TYPE_USER_DEFINED_SHIM1,
-+    HEADER_TYPE_USER_DEFINED_SHIM2,
-+    MAX_HEADER_TYPE_COUNT
-+} e_NetHeaderType;
-+
-+
-+#endif /* __NET_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/std_ext.h
-@@ -0,0 +1,48 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          std_ext.h
-+
-+ @Description   General Standard Definitions
-+*//***************************************************************************/
-+
-+#ifndef __STD_EXT_H
-+#define __STD_EXT_H
-+
-+
-+#include "types_ext.h"
-+#include "ncsw_ext.h"
-+
-+
-+#endif /* __STD_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/stdarg_ext.h
-@@ -0,0 +1,49 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#ifndef __STDARG_EXT_H
-+#define __STDARG_EXT_H
-+
-+
-+#if defined(NCSW_LINUX) && defined(__KERNEL__)
-+#include <stdarg.h>
-+
-+#else
-+#include <stdarg.h>
-+
-+#endif /* defined(NCSW_LINUX) && defined(__KERNEL__) */
-+
-+#include "std_ext.h"
-+
-+
-+#endif /* __STDARG_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/stdlib_ext.h
-@@ -0,0 +1,162 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+
-+#ifndef __STDLIB_EXT_H
-+#define __STDLIB_EXT_H
-+
-+
-+#if (defined(NCSW_LINUX)) && defined(__KERNEL__)
-+#include "stdarg_ext.h"
-+#include "std_ext.h"
-+
-+
-+/**
-+ * strtoul - convert a string to an uint32_t
-+ * @cp: The start of the string
-+ * @endp: A pointer to the end of the parsed string will be placed here
-+ * @base: The number base to use
-+ */
-+uint32_t strtoul(const char *cp,char **endp,uint32_t base);
-+
-+/**
-+ * strtol - convert a string to a int32_t
-+ * @cp: The start of the string
-+ * @endp: A pointer to the end of the parsed string will be placed here
-+ * @base: The number base to use
-+ */
-+long strtol(const char *cp,char **endp,uint32_t base);
-+
-+/**
-+ * strtoull - convert a string to an uint64_t
-+ * @cp: The start of the string
-+ * @endp: A pointer to the end of the parsed string will be placed here
-+ * @base: The number base to use
-+ */
-+uint64_t strtoull(const char *cp,char **endp,uint32_t base);
-+
-+/**
-+ * strtoll - convert a string to a int64 long
-+ * @cp: The start of the string
-+ * @endp: A pointer to the end of the parsed string will be placed here
-+ * @base: The number base to use
-+ */
-+long long strtoll(const char *cp,char **endp,uint32_t base);
-+
-+/**
-+ * atoi - convert a character to a int
-+ * @s: The start of the string
-+ */
-+int atoi(const char *s);
-+
-+/**
-+ * strnlen - Find the length of a length-limited string
-+ * @s: The string to be sized
-+ * @count: The maximum number of bytes to search
-+ */
-+size_t strnlen(const char * s, size_t count);
-+
-+/**
-+ * strlen - Find the length of a string
-+ * @s: The string to be sized
-+ */
-+size_t strlen(const char * s);
-+
-+/**
-+ * strtok - Split a string into tokens
-+ * @s: The string to be searched
-+ * @ct: The characters to search for
-+ *
-+ * WARNING: strtok is deprecated, use strsep instead.
-+ */
-+char * strtok(char * s,const char * ct);
-+
-+/**
-+ * strncpy - Copy a length-limited, %NUL-terminated string
-+ * @dest: Where to copy the string to
-+ * @src: Where to copy the string from
-+ * @count: The maximum number of bytes to copy
-+ *
-+ * Note that unlike userspace strncpy, this does not %NUL-pad the buffer.
-+ * However, the result is not %NUL-terminated if the source exceeds
-+ * @count bytes.
-+ */
-+char * strncpy(char * dest,const char *src,size_t count);
-+
-+/**
-+ * strcpy - Copy a %NUL terminated string
-+ * @dest: Where to copy the string to
-+ * @src: Where to copy the string from
-+ */
-+char * strcpy(char * dest,const char *src);
-+
-+/**
-+ * vsscanf - Unformat a buffer into a list of arguments
-+ * @buf:    input buffer
-+ * @fmt:    format of buffer
-+ * @args:    arguments
-+ */
-+int vsscanf(const char * buf, const char * fmt, va_list args);
-+
-+/**
-+ * vsnprintf - Format a string and place it in a buffer
-+ * @buf: The buffer to place the result into
-+ * @size: The size of the buffer, including the trailing null space
-+ * @fmt: The format string to use
-+ * @args: Arguments for the format string
-+ *
-+ * Call this function if you are already dealing with a va_list.
-+ * You probably want snprintf instead.
-+ */
-+int vsnprintf(char *buf, size_t size, const char *fmt, va_list args);
-+
-+/**
-+ * vsprintf - Format a string and place it in a buffer
-+ * @buf: The buffer to place the result into
-+ * @fmt: The format string to use
-+ * @args: Arguments for the format string
-+ *
-+ * Call this function if you are already dealing with a va_list.
-+ * You probably want sprintf instead.
-+ */
-+int vsprintf(char *buf, const char *fmt, va_list args);
-+
-+#else
-+#include <stdlib.h>
-+#include <stdio.h>
-+#endif /* defined(NCSW_LINUX) && defined(__KERNEL__) */
-+
-+#include "std_ext.h"
-+
-+
-+#endif /* __STDLIB_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/string_ext.h
-@@ -0,0 +1,56 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#ifndef __STRING_EXT_H
-+#define __STRING_EXT_H
-+
-+
-+#if defined(NCSW_LINUX) && defined(__KERNEL__)
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+extern char * strtok ( char * str, const char * delimiters );
-+
-+#elif defined(__KERNEL__)
-+#include "linux/types.h"
-+#include "linux/posix_types.h"
-+#include "linux/string.h"
-+
-+#else
-+#include <string.h>
-+
-+#endif /* defined(NCSW_LINUX) && defined(__KERNEL__) */
-+
-+#include "std_ext.h"
-+
-+
-+#endif /* __STRING_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/types_ext.h
-@@ -0,0 +1,62 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          types_ext.h
-+
-+ @Description   General types Standard Definitions
-+*//***************************************************************************/
-+
-+#ifndef __TYPES_EXT_H
-+#define __TYPES_EXT_H
-+
-+#if defined(NCSW_LINUX)
-+#include "types_linux.h"
-+
-+#elif defined(NCSW_VXWORKS)
-+#include "types_vxworks.h"
-+
-+#elif defined(__GNUC__) && defined(__cplusplus)
-+#include "types_bb_gpp.h"
-+
-+#elif defined(__GNUC__)
-+#include "types_bb_gcc.h"
-+
-+#elif defined(__ghs__)
-+#include "types_ghs.h"
-+
-+#else
-+#include "types_dflt.h"
-+#endif /* defined (__ROCOO__) */
-+
-+#endif /* __TYPES_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/xx_common.h
-@@ -0,0 +1,56 @@
-+/*
-+ * Copyright 2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          debug_ext.h
-+
-+ @Description   Debug mode definitions.
-+*//***************************************************************************/
-+
-+#ifndef __XX_COMMON_H
-+#define __XX_COMMON_H
-+
-+/*****************************************************************************
-+ *  UNIFIED MODULE CODES
-+ *****************************************************************************/
-+#define MODULE_UNKNOWN          0x00000000
-+#define MODULE_FM               0x00010000
-+#define MODULE_FM_MURAM         0x00020000
-+#define MODULE_FM_PCD           0x00030000
-+#define MODULE_FM_RTC           0x00040000
-+#define MODULE_FM_MAC           0x00050000
-+#define MODULE_FM_PORT          0x00060000
-+#define MODULE_MM               0x00070000
-+#define MODULE_FM_SP            0x00080000
-+#define MODULE_FM_MACSEC        0x00090000
-+#endif /* __XX_COMMON_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/xx_ext.h
-@@ -0,0 +1,791 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          xx_ext.h
-+
-+ @Description   Prototypes, externals and typedefs for system-supplied
-+                (external) routines
-+*//***************************************************************************/
-+
-+#ifndef __XX_EXT_H
-+#define __XX_EXT_H
-+
-+#include "std_ext.h"
-+#include "xx_common.h"
-+#include "part_ext.h"
-+
-+
-+
-+/**************************************************************************//**
-+ @Group         xx_id  XX Interface (System call hooks)
-+
-+ @Description   Prototypes, externals and typedefs for system-supplied
-+                (external) routines
-+
-+ @{
-+*//***************************************************************************/
-+
-+#ifdef DEBUG_XX_MALLOC
-+void * XX_MallocDebug(uint32_t size, char *fname, int line);
-+
-+void * XX_MallocSmartDebug(uint32_t size,
-+                           int      memPartitionId,
-+                           uint32_t alignment,
-+                           char     *fname,
-+                           int      line);
-+
-+#define XX_Malloc(sz) \
-+    XX_MallocDebug((sz), __FILE__, __LINE__)
-+
-+#define XX_MallocSmart(sz, memt, al) \
-+    XX_MallocSmartDebug((sz), (memt), (al), __FILE__, __LINE__)
-+
-+#else /* not DEBUG_XX_MALLOC */
-+/**************************************************************************//**
-+ @Function      XX_Malloc
-+
-+ @Description   allocates contiguous block of memory.
-+
-+ @Param[in]     size - Number of bytes to allocate.
-+
-+ @Return        The address of the newly allocated block on success, NULL on failure.
-+*//***************************************************************************/
-+void * XX_Malloc(uint32_t size);
-+
-+/**************************************************************************//**
-+ @Function      XX_MallocSmart
-+
-+ @Description   Allocates contiguous block of memory in a specified
-+                alignment and from the specified segment.
-+
-+ @Param[in]     size            - Number of bytes to allocate.
-+ @Param[in]     memPartitionId  - Memory partition ID; The value zero must
-+                                  be mapped to the default heap partition.
-+ @Param[in]     alignment       - Required memory alignment (in bytes).
-+
-+ @Return        The address of the newly allocated block on success, NULL on failure.
-+*//***************************************************************************/
-+void * XX_MallocSmart(uint32_t size, int memPartitionId, uint32_t alignment);
-+#endif /* not DEBUG_XX_MALLOC */
-+
-+/**************************************************************************//**
-+ @Function      XX_FreeSmart
-+
-+ @Description   Frees the memory block pointed to by "p".
-+                Only for memory allocated by XX_MallocSmart
-+
-+ @Param[in]     p_Memory - pointer to the memory block.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void XX_FreeSmart(void *p_Memory);
-+
-+/**************************************************************************//**
-+ @Function      XX_Free
-+
-+ @Description   frees the memory block pointed to by "p".
-+
-+ @Param[in]     p_Memory - pointer to the memory block.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void XX_Free(void *p_Memory);
-+
-+/**************************************************************************//**
-+ @Function      XX_Print
-+
-+ @Description   print a string.
-+
-+ @Param[in]     str - string to print.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void XX_Print(char *str, ...);
-+
-+/**************************************************************************//**
-+ @Function      XX_SetIntr
-+
-+ @Description   Set an interrupt service routine for a specific interrupt source.
-+
-+ @Param[in]     irq     - Interrupt ID (system-specific number).
-+ @Param[in]     f_Isr   - Callback routine that will be called when the interrupt occurs.
-+ @Param[in]     handle  - The argument for the user callback routine.
-+
-+ @Return        E_OK on success; error code otherwise..
-+*//***************************************************************************/
-+t_Error XX_SetIntr(int irq, t_Isr *f_Isr, t_Handle handle);
-+
-+/**************************************************************************//**
-+ @Function      XX_FreeIntr
-+
-+ @Description   Free a specific interrupt and a specific callback routine.
-+
-+ @Param[in]     irq - Interrupt ID (system-specific number).
-+
-+ @Return        E_OK on success; error code otherwise..
-+*//***************************************************************************/
-+t_Error XX_FreeIntr(int irq);
-+
-+/**************************************************************************//**
-+ @Function      XX_EnableIntr
-+
-+ @Description   Enable a specific interrupt.
-+
-+ @Param[in]     irq - Interrupt ID (system-specific number).
-+
-+ @Return        E_OK on success; error code otherwise..
-+*//***************************************************************************/
-+t_Error XX_EnableIntr(int irq);
-+
-+/**************************************************************************//**
-+ @Function      XX_DisableIntr
-+
-+ @Description   Disable a specific interrupt.
-+
-+ @Param[in]     irq - Interrupt ID (system-specific number).
-+
-+ @Return        E_OK on success; error code otherwise..
-+*//***************************************************************************/
-+t_Error XX_DisableIntr(int irq);
-+
-+/**************************************************************************//**
-+ @Function      XX_DisableAllIntr
-+
-+ @Description   Disable all interrupts by masking them at the CPU.
-+
-+ @Return        A value that represents the interrupts state before the
-+                operation, and should be passed to the matching
-+                XX_RestoreAllIntr() call.
-+*//***************************************************************************/
-+uint32_t XX_DisableAllIntr(void);
-+
-+/**************************************************************************//**
-+ @Function      XX_RestoreAllIntr
-+
-+ @Description   Restore previous state of interrupts level at the CPU.
-+
-+ @Param[in]     flags - A value that represents the interrupts state to restore,
-+                        as returned by the matching call for XX_DisableAllIntr().
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void XX_RestoreAllIntr(uint32_t flags);
-+
-+
-+/**************************************************************************//**
-+ @Function      XX_Exit
-+
-+ @Description   Stop execution and report status (where it is applicable)
-+
-+ @Param[in]     status - exit status
-+*//***************************************************************************/
-+void    XX_Exit(int status);
-+
-+
-+/*****************************************************************************/
-+/*                        Tasklet Service Routines                           */
-+/*****************************************************************************/
-+typedef t_Handle t_TaskletHandle;
-+
-+/**************************************************************************//**
-+ @Function      XX_InitTasklet
-+
-+ @Description   Create and initialize a tasklet object.
-+
-+ @Param[in]     routine - A routine to be ran as a tasklet.
-+ @Param[in]     data    - An argument to pass to the tasklet.
-+
-+ @Return        Tasklet handle is returned on success. NULL is returned otherwise.
-+*//***************************************************************************/
-+t_TaskletHandle XX_InitTasklet (void (*routine)(void *), void *data);
-+
-+/**************************************************************************//**
-+ @Function      XX_FreeTasklet
-+
-+ @Description   Free a tasklet object.
-+
-+ @Param[in]     h_Tasklet - A handle to a tasklet to be free.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void XX_FreeTasklet (t_TaskletHandle h_Tasklet);
-+
-+/**************************************************************************//**
-+ @Function      XX_ScheduleTask
-+
-+ @Description   Schedule a tasklet object.
-+
-+ @Param[in]     h_Tasklet - A handle to a tasklet to be scheduled.
-+ @Param[in]     immediate - Indicate whether to schedule this tasklet on
-+                            the immediate queue or on the delayed one.
-+
-+ @Return        0 - on success. Error code - otherwise.
-+*//***************************************************************************/
-+int XX_ScheduleTask(t_TaskletHandle h_Tasklet, int immediate);
-+
-+/**************************************************************************//**
-+ @Function      XX_FlushScheduledTasks
-+
-+ @Description   Flush all tasks there are in the scheduled tasks queue.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void XX_FlushScheduledTasks(void);
-+
-+/**************************************************************************//**
-+ @Function      XX_TaskletIsQueued
-+
-+ @Description   Check if task is queued.
-+
-+ @Param[in]     h_Tasklet - A handle to a tasklet to be scheduled.
-+
-+ @Return        1 - task is queued. 0 - otherwise.
-+*//***************************************************************************/
-+int XX_TaskletIsQueued(t_TaskletHandle h_Tasklet);
-+
-+/**************************************************************************//**
-+ @Function      XX_SetTaskletData
-+
-+ @Description   Set data to a scheduled task. Used to change data of already
-+                scheduled task.
-+
-+ @Param[in]     h_Tasklet - A handle to a tasklet to be scheduled.
-+ @Param[in]     data      - Data to be set.
-+*//***************************************************************************/
-+void XX_SetTaskletData(t_TaskletHandle h_Tasklet, t_Handle data);
-+
-+/**************************************************************************//**
-+ @Function      XX_GetTaskletData
-+
-+ @Description   Get the data of scheduled task.
-+
-+ @Param[in]     h_Tasklet - A handle to a tasklet to be scheduled.
-+
-+ @Return        handle to the data of the task.
-+*//***************************************************************************/
-+t_Handle XX_GetTaskletData(t_TaskletHandle h_Tasklet);
-+
-+/**************************************************************************//**
-+ @Function      XX_BottomHalf
-+
-+ @Description   Bottom half implementation, invoked by the interrupt handler.
-+
-+                This routine handles all bottom-half tasklets with interrupts
-+                enabled.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void XX_BottomHalf(void);
-+
-+
-+/*****************************************************************************/
-+/*                        Spinlock Service Routines                          */
-+/*****************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      XX_InitSpinlock
-+
-+ @Description   Creates a spinlock.
-+
-+ @Return        Spinlock handle is returned on success; NULL otherwise.
-+*//***************************************************************************/
-+t_Handle XX_InitSpinlock(void);
-+
-+/**************************************************************************//**
-+ @Function      XX_FreeSpinlock
-+
-+ @Description   Frees the memory allocated for the spinlock creation.
-+
-+ @Param[in]     h_Spinlock - A handle to a spinlock.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void XX_FreeSpinlock(t_Handle h_Spinlock);
-+
-+/**************************************************************************//**
-+ @Function      XX_LockSpinlock
-+
-+ @Description   Locks a spinlock.
-+
-+ @Param[in]     h_Spinlock - A handle to a spinlock.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void XX_LockSpinlock(t_Handle h_Spinlock);
-+
-+/**************************************************************************//**
-+ @Function      XX_UnlockSpinlock
-+
-+ @Description   Unlocks a spinlock.
-+
-+ @Param[in]     h_Spinlock - A handle to a spinlock.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void XX_UnlockSpinlock(t_Handle h_Spinlock);
-+
-+/**************************************************************************//**
-+ @Function      XX_LockIntrSpinlock
-+
-+ @Description   Locks a spinlock (interrupt safe).
-+
-+ @Param[in]     h_Spinlock - A handle to a spinlock.
-+
-+ @Return        A value that represents the interrupts state before the
-+                operation, and should be passed to the matching
-+                XX_UnlockIntrSpinlock() call.
-+*//***************************************************************************/
-+uint32_t XX_LockIntrSpinlock(t_Handle h_Spinlock);
-+
-+/**************************************************************************//**
-+ @Function      XX_UnlockIntrSpinlock
-+
-+ @Description   Unlocks a spinlock (interrupt safe).
-+
-+ @Param[in]     h_Spinlock  - A handle to a spinlock.
-+ @Param[in]     intrFlags   - A value that represents the interrupts state to
-+                              restore, as returned by the matching call for
-+                              XX_LockIntrSpinlock().
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void XX_UnlockIntrSpinlock(t_Handle h_Spinlock, uint32_t intrFlags);
-+
-+
-+/*****************************************************************************/
-+/*                        Timers Service Routines                            */
-+/*****************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      XX_CurrentTime
-+
-+ @Description   Returns current system time.
-+
-+ @Return        Current system time (in milliseconds).
-+*//***************************************************************************/
-+uint32_t XX_CurrentTime(void);
-+
-+/**************************************************************************//**
-+ @Function      XX_CreateTimer
-+
-+ @Description   Creates a timer.
-+
-+ @Return        Timer handle is returned on success; NULL otherwise.
-+*//***************************************************************************/
-+t_Handle XX_CreateTimer(void);
-+
-+/**************************************************************************//**
-+ @Function      XX_FreeTimer
-+
-+ @Description   Frees the memory allocated for the timer creation.
-+
-+ @Param[in]     h_Timer - A handle to a timer.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void XX_FreeTimer(t_Handle h_Timer);
-+
-+/**************************************************************************//**
-+ @Function      XX_StartTimer
-+
-+ @Description   Starts a timer.
-+
-+                The user can select to start the timer as periodic timer or as
-+                one-shot timer. The user should provide a callback routine that
-+                will be called when the timer expires.
-+
-+ @Param[in]     h_Timer         - A handle to a timer.
-+ @Param[in]     msecs           - Timer expiration period (in milliseconds).
-+ @Param[in]     periodic        - TRUE for a periodic timer;
-+                                  FALSE for a one-shot timer..
-+ @Param[in]     f_TimerExpired  - A callback routine to be called when the
-+                                  timer expires.
-+ @Param[in]     h_Arg           - The argument to pass in the timer-expired
-+                                  callback routine.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void XX_StartTimer(t_Handle h_Timer,
-+                   uint32_t msecs,
-+                   bool     periodic,
-+                   void     (*f_TimerExpired)(t_Handle h_Arg),
-+                   t_Handle h_Arg);
-+
-+/**************************************************************************//**
-+ @Function      XX_StopTimer
-+
-+ @Description   Frees the memory allocated for the timer creation.
-+
-+ @Param[in]     h_Timer - A handle to a timer.
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void XX_StopTimer(t_Handle h_Timer);
-+
-+/**************************************************************************//**
-+ @Function      XX_ModTimer
-+
-+ @Description   Updates the expiration time of a timer.
-+
-+                This routine adds the given time to the current system time,
-+                and sets this value as the new expiration time of the timer.
-+
-+ @Param[in]     h_Timer - A handle to a timer.
-+ @Param[in]     msecs   - The new interval until timer expiration
-+                          (in milliseconds).
-+
-+ @Return        None.
-+*//***************************************************************************/
-+void XX_ModTimer(t_Handle h_Timer, uint32_t msecs);
-+
-+/**************************************************************************//**
-+ @Function      XX_Sleep
-+
-+ @Description   Non-busy wait until the desired time (in milliseconds) has passed.
-+
-+ @Param[in]     msecs - The requested sleep time (in milliseconds).
-+
-+ @Return        Zero if the requested time has elapsed; Otherwise, the value
-+                returned will be the unslept amount) in milliseconds.
-+
-+ @Cautions      This routine enables interrupts during its wait time.
-+*//***************************************************************************/
-+uint32_t XX_Sleep(uint32_t msecs);
-+
-+/**************************************************************************//**
-+ @Function      XX_UDelay
-+
-+ @Description   Busy-wait until the desired time (in microseconds) has passed.
-+
-+ @Param[in]     usecs - The requested delay time (in microseconds).
-+
-+ @Return        None.
-+
-+ @Cautions      It is highly unrecommended to call this routine during interrupt
-+                time, because the system time may not be updated properly during
-+                the delay loop. The behavior of this routine during interrupt
-+                time is unexpected.
-+*//***************************************************************************/
-+void XX_UDelay(uint32_t usecs);
-+
-+
-+/*****************************************************************************/
-+/*                         Other Service Routines                            */
-+/*****************************************************************************/
-+
-+/**************************************************************************//**
-+ @Function      XX_PhysToVirt
-+
-+ @Description   Translates a physical address to the matching virtual address.
-+
-+ @Param[in]     addr - The physical address to translate.
-+
-+ @Return        Virtual address.
-+*//***************************************************************************/
-+void * XX_PhysToVirt(physAddress_t addr);
-+
-+/**************************************************************************//**
-+ @Function      XX_VirtToPhys
-+
-+ @Description   Translates a virtual address to the matching physical address.
-+
-+ @Param[in]     addr - The virtual address to translate.
-+
-+ @Return        Physical address.
-+*//***************************************************************************/
-+physAddress_t XX_VirtToPhys(void *addr);
-+
-+
-+/**************************************************************************//**
-+ @Group         xx_ipc  XX Inter-Partition-Communication API
-+
-+ @Description   The following API is to be used when working with multiple
-+                partitions configuration.
-+
-+ @{
-+*//***************************************************************************/
-+
-+#define XX_IPC_MAX_ADDR_NAME_LENGTH 16         /**< Maximum length of an endpoint name string;
-+                                                    The IPC service can use this constant to limit
-+                                                    the storage space for IPC endpoint names. */
-+
-+
-+/**************************************************************************//**
-+ @Function      t_IpcMsgCompletion
-+
-+ @Description   Callback function used upon IPC non-blocking transaction completion
-+                to return message buffer to the caller and to forward reply if available.
-+
-+                This callback function may be attached by the source endpoint to any outgoing
-+                IPC message to indicate a non-blocking send (see also XX_IpcSendMessage() routine).
-+                Upon completion of an IPC transaction (consisting of a message and an optional reply),
-+                the IPC service invokes this callback routine to return the message buffer to the sender
-+                and to provide the received reply, if requested.
-+
-+                User provides this function. Driver invokes it.
-+
-+ @Param[in]     h_Module        - Abstract handle to the sending module -  the same handle as was passed
-+                                  in the XX_IpcSendMessage() function; This handle is typically used to point
-+                                  to the internal data structure of the source endpoint.
-+ @Param[in]     p_Msg           - Pointer to original (sent) message buffer;
-+                                  The source endpoint can free (or reuse) this buffer when message
-+                                  completion callback is called.
-+ @Param[in]     p_Reply         - Pointer to (received) reply buffer;
-+                                  This pointer is the same as was provided by the source endpoint in
-+                                  XX_IpcSendMessage().
-+ @Param[in]     replyLength     - Length (in bytes) of actual data in the reply buffer.
-+ @Param[in]     status          - Completion status - E_OK or failure indication, e.g. IPC transaction completion
-+                                  timeout.
-+
-+ @Return        None
-+ *//***************************************************************************/
-+typedef void    (t_IpcMsgCompletion)(t_Handle   h_Module,
-+                                     uint8_t    *p_Msg,
-+                                     uint8_t    *p_Reply,
-+                                     uint32_t   replyLength,
-+                                     t_Error    status);
-+
-+/**************************************************************************//**
-+ @Function      t_IpcMsgHandler
-+
-+ @Description   Callback function used as IPC message handler.
-+
-+                The IPC service invokes message handlers for each IPC message received.
-+                The actual function pointer should be registered by each destination endpoint
-+                via the XX_IpcRegisterMsgHandler() routine.
-+
-+                User provides this function. Driver invokes it.
-+
-+ @Param[in]     h_Module        - Abstract handle to the message handling module -  the same handle as
-+                                  was passed in the XX_IpcRegisterMsgHandler() function; this handle is
-+                                  typically used to point to the internal data structure of the destination
-+                                  endpoint.
-+ @Param[in]     p_Msg           - Pointer to message buffer with data received from peer.
-+ @Param[in]     msgLength       - Length (in bytes) of message data.
-+ @Param[in]     p_Reply         - Pointer to reply buffer, to be filled by the message handler and then sent
-+                                  by the IPC service;
-+                                  The reply buffer is allocated by the IPC service with size equals to the
-+                                  replyLength parameter provided in message handler registration (see
-+                                  XX_IpcRegisterMsgHandler() function);
-+                                  If replyLength was initially specified as zero during message handler registration,
-+                                  the IPC service may set this pointer to NULL and assume that a reply is not needed;
-+                                  The IPC service is also responsible for freeing the reply buffer after the
-+                                  reply has been sent or dismissed.
-+ @Param[in,out] p_ReplyLength   - Pointer to reply length, which has a dual role in this function:
-+                                  [In] equals the replyLength parameter provided in message handler
-+                                  registration (see XX_IpcRegisterMsgHandler() function), and
-+                                  [Out] should be updated by message handler to the actual reply length; if
-+                                  this value is set to zero, the IPC service must assume that a reply should
-+                                  not be sent;
-+                                  Note: If p_Reply is not NULL, p_ReplyLength must not be NULL as well.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+ *//***************************************************************************/
-+typedef t_Error (t_IpcMsgHandler)(t_Handle  h_Module,
-+                                  uint8_t   *p_Msg,
-+                                  uint32_t  msgLength,
-+                                  uint8_t   *p_Reply,
-+                                  uint32_t  *p_ReplyLength);
-+
-+/**************************************************************************//**
-+ @Function      XX_IpcRegisterMsgHandler
-+
-+ @Description   IPC mailbox registration.
-+
-+                This function is used for registering an IPC message handler in the IPC service.
-+                This function is called by each destination endpoint to indicate that it is ready
-+                to handle incoming messages. The IPC service invokes the message handler upon receiving
-+                a message addressed to the specified destination endpoint.
-+
-+ @Param[in]     addr                - The address name string associated with the destination endpoint;
-+                                      This address must be unique across the IPC service domain to ensure
-+                                      correct message routing.
-+ @Param[in]     f_MsgHandler        - Pointer to the message handler callback for processing incoming
-+                                      message; invoked by the IPC service upon receiving a message
-+                                      addressed to the destination endpoint specified by the addr
-+                                      parameter.
-+ @Param[in]     h_Module            - Abstract handle to the message handling module, passed unchanged
-+                                      to f_MsgHandler callback function.
-+ @Param[in]     replyLength         - The maximal data length (in bytes) of any reply that the specified message handler
-+                                      may generate; the IPC service provides the message handler with buffer
-+                                      for reply according to the length specified here (refer also to the description
-+                                      of #t_IpcMsgHandler callback function type);
-+                                      This size shall be zero if the message handler never generates replies.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error XX_IpcRegisterMsgHandler(char                   addr[XX_IPC_MAX_ADDR_NAME_LENGTH],
-+                                 t_IpcMsgHandler        *f_MsgHandler,
-+                                 t_Handle               h_Module,
-+                                 uint32_t               replyLength);
-+
-+/**************************************************************************//**
-+ @Function      XX_IpcUnregisterMsgHandler
-+
-+ @Description   Release IPC mailbox routine.
-+
-+                 This function is used for unregistering an IPC message handler from the IPC service.
-+                 This function is called by each destination endpoint to indicate that it is no longer
-+                 capable of handling incoming messages.
-+
-+ @Param[in]     addr          - The address name string associated with the destination endpoint;
-+                                This address is the same as was used when the message handler was
-+                                registered via XX_IpcRegisterMsgHandler().
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error XX_IpcUnregisterMsgHandler(char addr[XX_IPC_MAX_ADDR_NAME_LENGTH]);
-+
-+/**************************************************************************//**
-+ @Function      XX_IpcInitSession
-+
-+ @Description   This function is used for creating an IPC session between the source endpoint
-+                and the destination endpoint.
-+
-+                The actual implementation and representation of a session is left for the IPC service.
-+                The function returns an abstract handle to the created session. This handle shall be used
-+                by the source endpoint in subsequent calls to XX_IpcSendMessage().
-+                The IPC service assumes that before this function is called, no messages are sent from
-+                the specified source endpoint to the specified destination endpoint.
-+
-+                The IPC service may use a connection-oriented approach or a connectionless approach (or both)
-+                as described below.
-+
-+                @par Connection-Oriented Approach
-+
-+                The IPC service may implement a session in a connection-oriented approach -  when this function is called,
-+                the IPC service should take the necessary steps to bring up a source-to-destination channel for messages
-+                and a destination-to-source channel for replies. The returned handle should represent the internal
-+                representation of these channels.
-+
-+                @par Connectionless Approach
-+
-+                The IPC service may implement a session in a connectionless approach -  when this function is called, the
-+                IPC service should not perform any particular steps, but it must store the pair of source and destination
-+                addresses in some session representation and return it as a handle. When XX_IpcSendMessage() shall be
-+                called, the IPC service may use this handle to provide the necessary identifiers for routing the messages
-+                through the connectionless medium.
-+
-+ @Param[in]     destAddr      - The address name string associated with the destination endpoint.
-+ @Param[in]     srcAddr       - The address name string associated with the source endpoint.
-+
-+ @Return        Abstract handle to the initialized session, or NULL on error.
-+*//***************************************************************************/
-+t_Handle XX_IpcInitSession(char destAddr[XX_IPC_MAX_ADDR_NAME_LENGTH],
-+                           char srcAddr[XX_IPC_MAX_ADDR_NAME_LENGTH]);
-+
-+/**************************************************************************//**
-+ @Function      XX_IpcFreeSession
-+
-+ @Description   This function is used for terminating an existing IPC session between a source endpoint
-+                and a destination endpoint.
-+
-+                The IPC service assumes that after this function is called, no messages shall be sent from
-+                the associated source endpoint to the associated destination endpoint.
-+
-+ @Param[in]     h_Session      - Abstract handle to the IPC session -  the same handle as was originally
-+                                 returned by the XX_IpcInitSession() function.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error XX_IpcFreeSession(t_Handle h_Session);
-+
-+/**************************************************************************//**
-+ @Function      XX_IpcSendMessage
-+
-+ @Description   IPC message send routine.
-+
-+                This function may be used by a source endpoint to send an IPC message to a destination
-+                endpoint. The source endpoint cannot send a message to the destination endpoint without
-+                first initiating a session with that destination endpoint via XX_IpcInitSession() routine.
-+
-+                The source endpoint must provide the buffer pointer and length of the outgoing message.
-+                Optionally, it may also provide a buffer for an expected reply. In the latter case, the
-+                transaction is not considered complete by the IPC service until the reply has been received.
-+                If the source endpoint does not provide a reply buffer, the transaction is considered
-+                complete after the message has been sent. The source endpoint must keep the message (and
-+                optional reply) buffers valid until the transaction is complete.
-+
-+                @par Non-blocking mode
-+
-+                The source endpoint may request a non-blocking send by providing a non-NULL pointer to a message
-+                completion callback function (f_Completion). Upon completion of the IPC transaction (consisting of a
-+                message and an optional reply), the IPC service invokes this callback routine to return the message
-+                buffer to the sender and to provide the received reply, if requested.
-+
-+                @par Blocking mode
-+
-+                The source endpoint may request a blocking send by setting f_Completion to NULL. The function is
-+                expected to block until the IPC transaction is complete -  either the reply has been received or (if no reply
-+                was requested) the message has been sent.
-+
-+ @Param[in]     h_Session       - Abstract handle to the IPC session -  the same handle as was originally
-+                                  returned by the XX_IpcInitSession() function.
-+ @Param[in]     p_Msg           - Pointer to message buffer to send.
-+ @Param[in]     msgLength       - Length (in bytes) of actual data in the message buffer.
-+ @Param[in]     p_Reply         - Pointer to reply buffer -  if this buffer is not NULL, the IPC service
-+                                  fills this buffer with the received reply data;
-+                                  In blocking mode, the reply data must be valid when the function returns;
-+                                  In non-blocking mode, the reply data is valid when f_Completion is called;
-+                                  If this pointer is NULL, no reply is expected.
-+ @Param[in,out] p_ReplyLength   - Pointer to reply length, which has a dual role in this function:
-+                                  [In] specifies the maximal length (in bytes) of the reply buffer pointed by
-+                                  p_Reply, and
-+                                  [Out] in non-blocking mode this value is updated by the IPC service to the
-+                                  actual reply length (in bytes).
-+ @Param[in]     f_Completion    - Pointer to a completion callback to be used in non-blocking send mode;
-+                                  The completion callback is invoked by the IPC service upon
-+                                  completion of the IPC transaction (consisting of a message and an optional
-+                                  reply);
-+                                  If this pointer is NULL, the function is expected to block until the IPC
-+                                  transaction is complete.
-+ @Param[in]     h_Arg           - Abstract handle to the sending module; passed unchanged to the f_Completion
-+                                  callback function as the first argument.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error XX_IpcSendMessage(t_Handle           h_Session,
-+                          uint8_t            *p_Msg,
-+                          uint32_t           msgLength,
-+                          uint8_t            *p_Reply,
-+                          uint32_t           *p_ReplyLength,
-+                          t_IpcMsgCompletion *f_Completion,
-+                          t_Handle           h_Arg);
-+
-+
-+/** @} */ /* end of xx_ipc group */
-+/** @} */ /* end of xx_id group */
-+
-+
-+#endif /* __XX_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/ls1043_dflags.h
-@@ -0,0 +1,56 @@
-+/*
-+ * Copyright 2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __dflags_h
-+#define __dflags_h
-+
-+
-+#define NCSW_LINUX
-+
-+#define LS1043
-+
-+#define DEBUG_ERRORS        1
-+
-+#if defined(DEBUG)
-+#define DEBUG_GLOBAL_LEVEL  REPORT_LEVEL_INFO
-+
-+#define DEBUG_XX_MALLOC
-+#define DEBUG_MEM_LEAKS
-+
-+#else
-+#define DEBUG_GLOBAL_LEVEL  REPORT_LEVEL_WARNING
-+#endif /* (DEBUG) */
-+
-+#define REPORT_EVENTS       1
-+#define EVENT_GLOBAL_LEVEL  REPORT_LEVEL_MINOR
-+
-+#endif /* __dflags_h */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-@@ -0,0 +1,53 @@
-+#
-+# Makefile config for the Freescale NetcommSW
-+#
-+NET_DPA     = $(srctree)/drivers/net
-+DRV_DPA     = $(srctree)/drivers/net/ethernet/freescale/sdk_dpaa
-+FMAN        = $(srctree)/drivers/net/ethernet/freescale/sdk_fman
-+
-+ifeq ("$(CONFIG_FMAN_P3040_P4080_P5020)", "y")
-+ccflags-y +=-include $(FMAN)/p3040_4080_5020_dflags.h
-+endif
-+ifeq ("$(CONFIG_FMAN_P1023)", "y")
-+ccflags-y +=-include $(FMAN)/p1023_dflags.h
-+endif
-+ifdef CONFIG_FMAN_V3H
-+ccflags-y +=-include $(FMAN)/fmanv3h_dflags.h
-+endif
-+ifdef CONFIG_FMAN_V3L
-+ccflags-y +=-include $(FMAN)/fmanv3l_dflags.h
-+endif
-+ifdef CONFIG_FMAN_ARM
-+ccflags-y +=-include $(FMAN)/ls1043_dflags.h
-+endif
-+
-+ccflags-y += -I$(DRV_DPA)/
-+ccflags-y += -I$(FMAN)/inc
-+ccflags-y += -I$(FMAN)/inc/cores
-+ccflags-y += -I$(FMAN)/inc/etc
-+ccflags-y += -I$(FMAN)/inc/Peripherals
-+ccflags-y += -I$(FMAN)/inc/flib
-+
-+ifeq ("$(CONFIG_FMAN_P3040_P4080_P5020)", "y")
-+ccflags-y += -I$(FMAN)/inc/integrations/P3040_P4080_P5020
-+endif
-+ifeq ("$(CONFIG_FMAN_P1023)", "y")
-+ccflags-y += -I$(FMAN)/inc/integrations/P1023
-+endif
-+ifdef CONFIG_FMAN_V3H
-+ccflags-y += -I$(FMAN)/inc/integrations/FMANV3H
-+endif
-+ifdef CONFIG_FMAN_V3L
-+ccflags-y += -I$(FMAN)/inc/integrations/FMANV3L
-+endif
-+ifdef CONFIG_FMAN_ARM
-+ccflags-y += -I$(FMAN)/inc/integrations/LS1043
-+endif
-+
-+ccflags-y += -I$(FMAN)/src/inc
-+ccflags-y += -I$(FMAN)/src/inc/system
-+ccflags-y += -I$(FMAN)/src/inc/wrapper
-+ccflags-y += -I$(FMAN)/src/inc/xx
-+ccflags-y += -I$(srctree)/include/uapi/linux/fmd
-+ccflags-y += -I$(srctree)/include/uapi/linux/fmd/Peripherals
-+ccflags-y += -I$(srctree)/include/uapi/linux/fmd/integrations
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/p1023_dflags.h
-@@ -0,0 +1,65 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __dflags_h
-+#define __dflags_h
-+
-+
-+#define NCSW_LINUX
-+#if 0
-+#define DEBUG
-+#endif
-+
-+#define P1023
-+#define NCSW_PPC_CORE
-+
-+#define DEBUG_ERRORS        1
-+
-+#if defined(DEBUG)
-+#define DEBUG_GLOBAL_LEVEL  REPORT_LEVEL_INFO
-+
-+#define DEBUG_XX_MALLOC
-+#define DEBUG_MEM_LEAKS
-+
-+#else
-+#define DEBUG_GLOBAL_LEVEL  REPORT_LEVEL_WARNING
-+#endif /* (DEBUG) */
-+
-+#define REPORT_EVENTS       1
-+#define EVENT_GLOBAL_LEVEL  REPORT_LEVEL_MINOR
-+
-+#ifdef CONFIG_P4080_SIM
-+#error "Do not define CONFIG_P4080_SIM..."
-+#endif
-+
-+
-+#endif /* __dflags_h */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/p3040_4080_5020_dflags.h
-@@ -0,0 +1,62 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __dflags_h
-+#define __dflags_h
-+
-+
-+#define NCSW_LINUX
-+
-+#define P4080
-+#define NCSW_PPC_CORE
-+
-+#define DEBUG_ERRORS        1
-+
-+#if defined(DEBUG)
-+#define DEBUG_GLOBAL_LEVEL  REPORT_LEVEL_INFO
-+
-+#define DEBUG_XX_MALLOC
-+#define DEBUG_MEM_LEAKS
-+
-+#else
-+#define DEBUG_GLOBAL_LEVEL  REPORT_LEVEL_WARNING
-+#endif /* (DEBUG) */
-+
-+#define REPORT_EVENTS       1
-+#define EVENT_GLOBAL_LEVEL  REPORT_LEVEL_MINOR
-+
-+#ifdef CONFIG_P4080_SIM
-+#define SIMULATOR
-+#endif /* CONFIG_P4080_SIM */
-+
-+
-+#endif /* __dflags_h */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/Makefile
-@@ -0,0 +1,11 @@
-+#
-+# Makefile for the Freescale Ethernet controllers
-+#
-+ccflags-y           += -DVERSION=\"\"
-+#
-+#Include netcomm SW specific definitions
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+#
-+obj-y		+= system/
-+obj-y		+= wrapper/
-+obj-y		+= xx/
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/inc/system/sys_ext.h
-@@ -0,0 +1,118 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __SYS_EXT_H
-+#define __SYS_EXT_H
-+
-+#include "std_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         sys_grp     System Interfaces
-+
-+ @Description   Linux system programming interfaces.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         sys_gen_grp     System General Interface
-+
-+ @Description   General definitions, structures and routines of the linux
-+                system programming interface.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Collection    Macros for Advanced Configuration Requests
-+ @{
-+*//***************************************************************************/
-+#define SYS_MAX_ADV_CONFIG_ARGS     4
-+                                    /**< Maximum number of arguments in
-+                                         an advanced configuration entry */
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Description   System Object Advanced Configuration Entry
-+
-+                This structure represents a single request for an advanced
-+                configuration call on the initialized object. An array of such
-+                requests may be contained in the settings structure of the
-+                corresponding object.
-+
-+                The maximum number of arguments is limited to #SYS_MAX_ADV_CONFIG_ARGS.
-+*//***************************************************************************/
-+typedef struct t_SysObjectAdvConfigEntry
-+{
-+    void        *p_Function;    /**< Pointer to advanced configuration routine */
-+
-+    uintptr_t    args[SYS_MAX_ADV_CONFIG_ARGS];
-+                                /**< Array of arguments for the specified routine;
-+                                     All arguments should be casted to uint32_t. */
-+} t_SysObjectAdvConfigEntry;
-+
-+
-+/** @} */ /* end of sys_gen_grp */
-+/** @} */ /* end of sys_grp */
-+
-+#define NCSW_PARAMS(_num, _params)   ADV_CONFIG_PARAMS_##_num _params
-+
-+#define ADV_CONFIG_PARAMS_1(_type) \
-+    , (_type)p_Entry->args[0]
-+
-+#define SET_ADV_CONFIG_ARGS_1(_arg0)        \
-+    p_Entry->args[0] = (uintptr_t )(_arg0);   \
-+
-+#define ARGS(_num, _params) SET_ADV_CONFIG_ARGS_##_num _params
-+
-+#define ADD_ADV_CONFIG_START(_p_Entries, _maxEntries)           \
-+    {                                                           \
-+        t_SysObjectAdvConfigEntry   *p_Entry;                   \
-+        t_SysObjectAdvConfigEntry   *p_Entrys = (_p_Entries);   \
-+        int                         i=0, max = (_maxEntries);   \
-+
-+#define ADD_ADV_CONFIG_END \
-+    }
-+
-+#define ADV_CONFIG_CHECK_START(_p_Entry)                        \
-+    {                                                           \
-+        t_SysObjectAdvConfigEntry   *p_Entry = _p_Entry;        \
-+        t_Error                     errCode;                    \
-+
-+#define ADV_CONFIG_CHECK(_handle, _func, _params)               \
-+        if (p_Entry->p_Function == _func)                       \
-+        {                                                       \
-+            errCode = _func(_handle _params);                   \
-+        } else
-+
-+#endif /* __SYS_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/inc/system/sys_io_ext.h
-@@ -0,0 +1,46 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __SYS_IO_EXT_H
-+#define __SYS_IO_EXT_H
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+
-+
-+t_Error  SYS_RegisterIoMap   (uint64_t virtAddr, uint64_t physAddr, uint32_t size);
-+t_Error  SYS_UnregisterIoMap (uint64_t virtAddr);
-+uint64_t SYS_PhysToVirt      (uint64_t addr);
-+uint64_t SYS_VirtToPhys      (uint64_t addr);
-+
-+
-+#endif /* __SYS_IO_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/inc/types_linux.h
-@@ -0,0 +1,208 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __TYPES_LINUX_H__
-+#define __TYPES_LINUX_H__
-+
-+#include <linux/version.h>
-+
-+#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
-+#define MODVERSIONS
-+#endif
-+#ifdef MODVERSIONS
-+#include <config/modversions.h>
-+#endif /* MODVERSIONS */
-+
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <asm/io.h>
-+#include <linux/delay.h>
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
-+    #error "This kernel is probably not supported!!!"
-+#elif   (!((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)) || \
-+           (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,27)) || \
-+           (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,30))))
-+    #warning "This kernel is probably not supported!!! You may need to add some fixes."
-+#endif    /* LINUX_VERSION_CODE */
-+
-+
-+typedef float               float_t;    /* Single precision floating point  */
-+typedef double              double_t;   /* Double precision floating point  */
-+
-+
-+#define _Packed
-+#define _PackedType __attribute__ ((packed))
-+
-+typedef  phys_addr_t physAddress_t;
-+
-+#define UINT8_MAX   0xFF
-+#define UINT8_MIN   0
-+#define UINT16_MAX  0xFFFF
-+#define UINT16_MIN  0
-+#define UINT32_MAX  0xFFFFFFFF
-+#define UINT32_MIN  0
-+#define UINT64_MAX  0xFFFFFFFFFFFFFFFFLL
-+#define UINT64_MIN  0
-+#define INT8_MAX    0x7F
-+#define INT8_MIN    0x80
-+#define INT16_MAX   0x7FFF
-+#define INT16_MIN   0x8000
-+#define INT32_MAX   0x7FFFFFFF
-+#define INT32_MIN   0x80000000
-+#define INT64_MAX   0x7FFFFFFFFFFFFFFFLL
-+#define INT64_MIN   0x8000000000000000LL
-+
-+#define ON          1
-+#define OFF         0
-+
-+#define FALSE       false
-+#define TRUE        true
-+
-+
-+/************************/
-+/* memory access macros */
-+/************************/
-+#ifdef CONFIG_FMAN_ARM
-+#define in_be16(a)		__be16_to_cpu(__raw_readw(a))
-+#define in_be32(a)		__be32_to_cpu(__raw_readl(a))
-+#define out_be16(a, v)		__raw_writew(__cpu_to_be16(v), a)
-+#define out_be32(a, v)		__raw_writel(__cpu_to_be32(v), a)
-+#endif
-+
-+#define GET_UINT8(arg)              *(volatile uint8_t *)(&(arg))
-+#define GET_UINT16(arg)             in_be16(&(arg))//*(volatile uint16_t*)(&(arg))
-+#define GET_UINT32(arg)             in_be32(&(arg))//*(volatile uint32_t*)(&(arg))
-+#define GET_UINT64(arg)             *(volatile uint64_t*)(&(arg))
-+
-+#ifdef VERBOSE_WRITE
-+void    XX_Print(char *str, ...);
-+#define WRITE_UINT8(arg, data)  \
-+    do { XX_Print("ADDR: 0x%08x, VAL: 0x%02x\r\n",    (uint32_t)&(arg), (data)); *(volatile uint8_t *)(&(arg)) = (data); } while (0)
-+#define WRITE_UINT16(arg, data) \
-+    do { XX_Print("ADDR: 0x%08x, VAL: 0x%04x\r\n",    (uint32_t)&(arg), (data)); out_be16(&(arg), data); /* *(volatile uint16_t*)(&(arg)) = (data);*/ } while (0)
-+#define WRITE_UINT32(arg, data) \
-+    do { XX_Print("ADDR: 0x%08x, VAL: 0x%08x\r\n",    (uint32_t)&(arg), (data)); out_be32(&(arg), data); /* *(volatile uint32_t*)(&(arg)) = (data);*/ } while (0)
-+#define WRITE_UINT64(arg, data) \
-+    do { XX_Print("ADDR: 0x%08x, VAL: 0x%016llx\r\n", (uint32_t)&(arg), (data)); *(volatile uint64_t*)(&(arg)) = (data); } while (0)
-+
-+#else  /* not VERBOSE_WRITE */
-+#define WRITE_UINT8(arg, data)      *(volatile uint8_t *)(&(arg)) = (data)
-+#define WRITE_UINT16(arg, data)     out_be16(&(arg), data)//*(volatile uint16_t*)(&(arg)) = (data)
-+#define WRITE_UINT32(arg, data)     out_be32(&(arg), data)//*(volatile unsigned int *)(&(arg)) = (data)
-+#define WRITE_UINT64(arg, data)     *(volatile uint64_t*)(&(arg)) = (data)
-+#endif /* not VERBOSE_WRITE */
-+
-+
-+/*****************************************************************************/
-+/*                      General stuff                                        */
-+/*****************************************************************************/
-+#ifdef ARRAY_SIZE
-+#undef ARRAY_SIZE
-+#endif /* ARRAY_SIZE */
-+
-+#ifdef MAJOR
-+#undef MAJOR
-+#endif /* MAJOR */
-+
-+#ifdef MINOR
-+#undef MINOR
-+#endif /* MINOR */
-+
-+#ifdef QE_SIZEOF_BD
-+#undef QE_SIZEOF_BD
-+#endif /* QE_SIZEOF_BD */
-+
-+#ifdef BD_BUFFER_CLEAR
-+#undef BD_BUFFER_CLEAR
-+#endif /* BD_BUFFER_CLEAR */
-+
-+#ifdef BD_BUFFER
-+#undef BD_BUFFER
-+#endif /* BD_BUFFER */
-+
-+#ifdef BD_STATUS_AND_LENGTH_SET
-+#undef BD_STATUS_AND_LENGTH_SET
-+#endif /* BD_STATUS_AND_LENGTH_SET */
-+
-+#ifdef BD_STATUS_AND_LENGTH
-+#undef BD_STATUS_AND_LENGTH
-+#endif /* BD_STATUS_AND_LENGTH */
-+
-+#ifdef BD_BUFFER_ARG
-+#undef BD_BUFFER_ARG
-+#endif /* BD_BUFFER_ARG */
-+
-+#ifdef BD_GET_NEXT
-+#undef BD_GET_NEXT
-+#endif /* BD_GET_NEXT */
-+
-+#ifdef QE_SDEBCR_BA_MASK
-+#undef QE_SDEBCR_BA_MASK
-+#endif /* QE_SDEBCR_BA_MASK */
-+
-+#ifdef BD_BUFFER_SET
-+#undef BD_BUFFER_SET
-+#endif /* BD_BUFFER_SET */
-+
-+#ifdef UPGCR_PROTOCOL
-+#undef UPGCR_PROTOCOL
-+#endif /* UPGCR_PROTOCOL */
-+
-+#ifdef UPGCR_TMS
-+#undef UPGCR_TMS
-+#endif /* UPGCR_TMS */
-+
-+#ifdef UPGCR_RMS
-+#undef UPGCR_RMS
-+#endif /* UPGCR_RMS */
-+
-+#ifdef UPGCR_ADDR
-+#undef UPGCR_ADDR
-+#endif /* UPGCR_ADDR */
-+
-+#ifdef UPGCR_DIAG
-+#undef UPGCR_DIAG
-+#endif /* UPGCR_DIAG */
-+
-+#ifdef NCSW_PARAMS
-+#undef NCSW_PARAMS
-+#endif /* NCSW_PARAMS */
-+
-+#ifdef NO_IRQ
-+#undef NO_IRQ
-+#endif /* NO_IRQ */
-+
-+#define PRINT_LINE   XX_Print("%s:\n %s [%d]\n",__FILE__,__FUNCTION__,__LINE__);
-+
-+
-+#endif /* __TYPES_LINUX_H__ */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/fsl_fman_test.h
-@@ -0,0 +1,84 @@
-+/* Copyright (c) 2008-2011 Freescale Semiconductor, Inc.
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/******************************************************************************
-+ @File          fsl_fman_test.h
-+
-+ @Description
-+*//***************************************************************************/
-+
-+#ifndef __FSL_FMAN_TEST_H
-+#define __FSL_FMAN_TEST_H
-+
-+#include <linux/types.h>
-+#include <linux/smp.h>  /* raw_smp_processor_id() */
-+
-+//#define FMT_K_DBG
-+//#define FMT_K_DBG_RUNTIME
-+
-+#define _fmt_prk(stage, format, arg...)	\
-+	printk(stage "fmt (cpu:%u): " format, raw_smp_processor_id(), ##arg)
-+
-+#define _fmt_inf(format, arg...) _fmt_prk(KERN_INFO, format, ##arg)
-+#define _fmt_wrn(format, arg...) _fmt_prk(KERN_WARNING, format, ##arg)
-+#define _fmt_err(format, arg...) _fmt_prk(KERN_ERR, format, ##arg)
-+
-+/* there are two macros for debugging: for runtime and generic.
-+ * Helps when the runtime functions are not targeted for debugging,
-+ * thus all the unnecessary information will be skipped.
-+ */
-+/* used for generic debugging */
-+#if defined(FMT_K_DBG)
-+	#define _fmt_dbg(format, arg...) \
-+		printk("fmt [%s:%u](cpu:%u) - " format,	\
-+			__func__, __LINE__, raw_smp_processor_id(), ##arg)
-+#else
-+#	define _fmt_dbg(arg...)
-+#endif
-+
-+/* used for debugging runtime functions */
-+#if defined(FMT_K_DBG_RUNTIME)
-+	#define _fmt_dbgr(format, arg...) \
-+		printk("fmt [%s:%u](cpu:%u) - " format, \
-+			__func__, __LINE__, raw_smp_processor_id(), ##arg)
-+#else
-+#	define _fmt_dbgr(arg...)
-+#endif
-+
-+#define FMT_RX_ERR_Q    0xffffffff
-+#define FMT_RX_DFLT_Q   0xfffffffe
-+#define FMT_TX_ERR_Q    0xfffffffd
-+#define FMT_TX_CONF_Q   0xfffffffc
-+
-+#define FMAN_TEST_MAX_TX_FQS 8
-+
-+#endif /* __FSL_FMAN_TEST_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/lnxwrp_exp_sym.h
-@@ -0,0 +1,128 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc.
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/*
-+ @File          lnxwrp_exp_sym.h
-+ @Description   FMan exported routines
-+*/
-+
-+#ifndef __LNXWRP_EXP_SYM_H
-+#define __LNXWRP_EXP_SYM_H
-+
-+#include "fm_port_ext.h"
-+#include "fm_pcd_ext.h"
-+#include "fm_mac_ext.h"
-+
-+
-+/* FMAN Port exported routines */
-+EXPORT_SYMBOL(FM_PORT_Disable);
-+EXPORT_SYMBOL(FM_PORT_Enable);
-+EXPORT_SYMBOL(FM_PORT_SetPCD);
-+EXPORT_SYMBOL(FM_PORT_DeletePCD);
-+
-+/* Runtime PCD exported routines */
-+EXPORT_SYMBOL(FM_PCD_Enable);
-+EXPORT_SYMBOL(FM_PCD_Disable);
-+EXPORT_SYMBOL(FM_PCD_GetCounter);
-+EXPORT_SYMBOL(FM_PCD_PrsLoadSw);
-+EXPORT_SYMBOL(FM_PCD_KgSetDfltValue);
-+EXPORT_SYMBOL(FM_PCD_KgSetAdditionalDataAfterParsing);
-+EXPORT_SYMBOL(FM_PCD_SetException);
-+EXPORT_SYMBOL(FM_PCD_ModifyCounter);
-+EXPORT_SYMBOL(FM_PCD_SetPlcrStatistics);
-+EXPORT_SYMBOL(FM_PCD_SetPrsStatistics);
-+EXPORT_SYMBOL(FM_PCD_ForceIntr);
-+EXPORT_SYMBOL(FM_PCD_HcTxConf);
-+
-+EXPORT_SYMBOL(FM_PCD_NetEnvCharacteristicsSet);
-+EXPORT_SYMBOL(FM_PCD_NetEnvCharacteristicsDelete);
-+EXPORT_SYMBOL(FM_PCD_KgSchemeSet);
-+EXPORT_SYMBOL(FM_PCD_KgSchemeDelete);
-+EXPORT_SYMBOL(FM_PCD_KgSchemeGetCounter);
-+EXPORT_SYMBOL(FM_PCD_KgSchemeSetCounter);
-+EXPORT_SYMBOL(FM_PCD_CcRootBuild);
-+EXPORT_SYMBOL(FM_PCD_CcRootDelete);
-+EXPORT_SYMBOL(FM_PCD_MatchTableSet);
-+EXPORT_SYMBOL(FM_PCD_MatchTableDelete);
-+EXPORT_SYMBOL(FM_PCD_CcRootModifyNextEngine);
-+EXPORT_SYMBOL(FM_PCD_MatchTableModifyNextEngine);
-+EXPORT_SYMBOL(FM_PCD_MatchTableFindNModifyNextEngine);
-+EXPORT_SYMBOL(FM_PCD_MatchTableModifyMissNextEngine);
-+EXPORT_SYMBOL(FM_PCD_MatchTableRemoveKey);
-+EXPORT_SYMBOL(FM_PCD_MatchTableFindNRemoveKey);
-+EXPORT_SYMBOL(FM_PCD_MatchTableAddKey);
-+EXPORT_SYMBOL(FM_PCD_MatchTableModifyKeyAndNextEngine);
-+EXPORT_SYMBOL(FM_PCD_MatchTableFindNModifyKeyAndNextEngine);
-+EXPORT_SYMBOL(FM_PCD_MatchTableModifyKey);
-+EXPORT_SYMBOL(FM_PCD_MatchTableFindNModifyKey);
-+EXPORT_SYMBOL(FM_PCD_MatchTableGetIndexedHashBucket);
-+EXPORT_SYMBOL(FM_PCD_MatchTableGetNextEngine);
-+EXPORT_SYMBOL(FM_PCD_MatchTableGetKeyCounter);
-+EXPORT_SYMBOL(FM_PCD_MatchTableGetKeyStatistics);
-+EXPORT_SYMBOL(FM_PCD_MatchTableFindNGetKeyStatistics);
-+EXPORT_SYMBOL(FM_PCD_MatchTableGetMissStatistics);
-+EXPORT_SYMBOL(FM_PCD_HashTableGetMissStatistics);
-+EXPORT_SYMBOL(FM_PCD_HashTableSet);
-+EXPORT_SYMBOL(FM_PCD_HashTableDelete);
-+EXPORT_SYMBOL(FM_PCD_HashTableAddKey);
-+EXPORT_SYMBOL(FM_PCD_HashTableRemoveKey);
-+EXPORT_SYMBOL(FM_PCD_HashTableModifyNextEngine);
-+EXPORT_SYMBOL(FM_PCD_HashTableModifyMissNextEngine);
-+EXPORT_SYMBOL(FM_PCD_HashTableGetMissNextEngine);
-+EXPORT_SYMBOL(FM_PCD_HashTableFindNGetKeyStatistics);
-+EXPORT_SYMBOL(FM_PCD_PlcrProfileSet);
-+EXPORT_SYMBOL(FM_PCD_PlcrProfileDelete);
-+EXPORT_SYMBOL(FM_PCD_PlcrProfileGetCounter);
-+EXPORT_SYMBOL(FM_PCD_PlcrProfileSetCounter);
-+EXPORT_SYMBOL(FM_PCD_ManipNodeSet);
-+EXPORT_SYMBOL(FM_PCD_ManipNodeDelete);
-+EXPORT_SYMBOL(FM_PCD_ManipGetStatistics);
-+EXPORT_SYMBOL(FM_PCD_ManipNodeReplace);
-+#if (DPAA_VERSION >= 11)
-+EXPORT_SYMBOL(FM_PCD_FrmReplicSetGroup);
-+EXPORT_SYMBOL(FM_PCD_FrmReplicDeleteGroup);
-+EXPORT_SYMBOL(FM_PCD_FrmReplicAddMember);
-+EXPORT_SYMBOL(FM_PCD_FrmReplicRemoveMember);
-+#endif /* DPAA_VERSION >= 11 */
-+
-+#ifdef FM_CAPWAP_SUPPORT
-+EXPORT_SYMBOL(FM_PCD_StatisticsSetNode);
-+#endif /* FM_CAPWAP_SUPPORT */
-+
-+EXPORT_SYMBOL(FM_PCD_SetAdvancedOffloadSupport);
-+
-+/* FMAN MAC exported routines */
-+EXPORT_SYMBOL(FM_MAC_GetStatistics);
-+
-+EXPORT_SYMBOL(FM_GetSpecialOperationCoding);
-+
-+#endif /* __LNXWRP_EXP_SYM_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/lnxwrp_fm_ext.h
-@@ -0,0 +1,163 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/******************************************************************************
-+ @File          lnxwrp_fm_ext.h
-+
-+ @Description   TODO
-+*//***************************************************************************/
-+
-+#ifndef __LNXWRP_FM_EXT_H
-+#define __LNXWRP_FM_EXT_H
-+
-+#include "std_ext.h"
-+#include "sys_ext.h"
-+#include "fm_ext.h"
-+#include "fm_muram_ext.h"
-+#include "fm_pcd_ext.h"
-+#include "fm_port_ext.h"
-+#include "fm_mac_ext.h"
-+#include "fm_rtc_ext.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_LnxKern_grp Frame Manager Linux wrapper API
-+
-+ @Description   FM API functions, definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         FM_LnxKern_init_grp Initialization Unit
-+
-+ @Description   Initialization Unit
-+
-+                Initialization Flow:
-+                Initialization of the FM Module will be carried out by the Linux
-+                kernel according to the following sequence:
-+                a. Calling the initialization routine with no parameters.
-+                b. The driver will register to the Device-Tree.
-+                c. The Linux Device-Tree will initiate a call to the driver for
-+                   initialization.
-+                d. The driver will read the appropriate information from the Device-Tree
-+                e. [Optional] Calling the advance initialization routines to change
-+                   driver's defaults.
-+                f. Initialization of the device will be automatically upon using it.
-+
-+ @{
-+*//***************************************************************************/
-+
-+typedef struct t_WrpFmDevSettings
-+{
-+    t_FmParams                  param;
-+    t_SysObjectAdvConfigEntry   *advConfig;
-+} t_WrpFmDevSettings;
-+
-+typedef struct t_WrpFmPcdDevSettings
-+{
-+    t_FmPcdParams               param;
-+    t_SysObjectAdvConfigEntry   *advConfig;
-+} t_WrpFmPcdDevSettings;
-+
-+typedef struct t_WrpFmPortDevSettings
-+{
-+    bool                        frag_enabled;
-+    t_FmPortParams              param;
-+    t_SysObjectAdvConfigEntry   *advConfig;
-+} t_WrpFmPortDevSettings;
-+
-+typedef struct t_WrpFmMacDevSettings
-+{
-+    t_FmMacParams               param;
-+    t_SysObjectAdvConfigEntry   *advConfig;
-+} t_WrpFmMacDevSettings;
-+
-+
-+/**************************************************************************//**
-+ @Function      LNXWRP_FM_Init
-+
-+ @Description   Initialize the FM linux wrapper.
-+
-+ @Return        A handle (descriptor) of the newly created FM Linux wrapper
-+                structure.
-+*//***************************************************************************/
-+t_Handle LNXWRP_FM_Init(void);
-+
-+/**************************************************************************//**
-+ @Function      LNXWRP_FM_Free
-+
-+ @Description   Free the FM linux wrapper.
-+
-+ @Param[in]     h_LnxWrpFm   - A handle to the FM linux wrapper.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+t_Error  LNXWRP_FM_Free(t_Handle h_LnxWrpFm);
-+
-+/**************************************************************************//**
-+ @Function      LNXWRP_FM_GetMacHandle
-+
-+ @Description   Get the FM-MAC LLD handle from the FM linux wrapper.
-+
-+ @Param[in]     h_LnxWrpFm   - A handle to the FM linux wrapper.
-+ @Param[in]     fmId         - Index of the FM device to get the MAC handle from.
-+ @Param[in]     macId        - Index of the mac handle.
-+
-+ @Return        A handle of the LLD compressor.
-+*//***************************************************************************/
-+t_Handle LNXWRP_FM_GetMacHandle(t_Handle h_LnxWrpFm, uint8_t fmId, uint8_t macId);
-+
-+#ifdef CONFIG_FSL_SDK_FMAN_TEST
-+t_Handle LNXWRP_FM_TEST_Init(void);
-+t_Error  LNXWRP_FM_TEST_Free(t_Handle h_FmTestLnxWrp);
-+#endif /* CONFIG_FSL_SDK_FMAN_TEST */
-+
-+/** @} */ /* end of FM_LnxKern_init_grp group */
-+
-+
-+/**************************************************************************//**
-+ @Group         FM_LnxKern_ctrl_grp Control Unit
-+
-+ @Description   Control Unit
-+
-+                TODO
-+ @{
-+*//***************************************************************************/
-+
-+#include "lnxwrp_fsl_fman.h"
-+
-+/** @} */ /* end of FM_LnxKern_ctrl_grp group */
-+/** @} */ /* end of FM_LnxKern_grp group */
-+
-+
-+#endif /* __LNXWRP_FM_EXT_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/lnxwrp_fsl_fman.h
-@@ -0,0 +1,921 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/******************************************************************************
-+ @File		lnxwrp_fsl_fman.h
-+
-+ @Description	Linux internal kernel API
-+*//***************************************************************************/
-+
-+#ifndef __LNXWRP_FSL_FMAN_H
-+#define __LNXWRP_FSL_FMAN_H
-+
-+#include <linux/types.h>
-+#include <linux/device.h>   /* struct device */
-+#include <linux/fsl_qman.h> /* struct qman_fq */
-+#include "dpaa_integration_ext.h"
-+#include "fm_port_ext.h"
-+#include "fm_mac_ext.h"
-+#include "fm_macsec_ext.h"
-+#include "fm_rtc_ext.h"
-+
-+/**************************************************************************//**
-+ @Group		FM_LnxKern_grp Frame Manager Linux wrapper API
-+
-+ @Description	FM API functions, definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group		FM_LnxKern_ctrl_grp Control Unit
-+
-+ @Description	Control Unit
-+
-+		Internal Kernel Control Unit API
-+ @{
-+*//***************************************************************************/
-+
-+/*****************************************************************************/
-+/*                  Internal Linux kernel routines                           */
-+/*****************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   MACSEC Exceptions wrapper
-+*//***************************************************************************/
-+typedef enum fm_macsec_exception {
-+	SINGLE_BIT_ECC = e_FM_MACSEC_EX_SINGLE_BIT_ECC,
-+	MULTI_BIT_ECC = e_FM_MACSEC_EX_MULTI_BIT_ECC
-+} fm_macsec_exception;
-+
-+/**************************************************************************//**
-+ @Description   Unknown sci frame treatment wrapper
-+*//***************************************************************************/
-+typedef enum fm_macsec_unknown_sci_frame_treatment {
-+	SCI_DISCARD_BOTH = e_FM_MACSEC_UNKNOWN_SCI_FRAME_TREATMENT_DISCARD_BOTH,
-+	SCI_DISCARD_UNCTRL_DELIVER_DISCARD_CTRL = \
-+		e_FM_MACSEC_UNKNOWN_SCI_FRAME_TREATMENT_DISCARD_UNCONTROLLED_DELIVER_OR_DISCARD_CONTROLLED,
-+	SCI_DELIVER_UNCTRL_DISCARD_CTRL = \
-+		e_FM_MACSEC_UNKNOWN_SCI_FRAME_TREATMENT_DELIVER_UNCONTROLLED_DISCARD_CONTROLLED,
-+	SCI_DELIVER_DISCARD_UNCTRL_DELIVER_DISCARD_CTRL = \
-+		e_FM_MACSEC_UNKNOWN_SCI_FRAME_TREATMENT_DELIVER_OR_DISCARD_UNCONTROLLED_DELIVER_OR_DISCARD_CONTROLLED
-+} fm_macsec_unknown_sci_frame_treatment;
-+
-+/**************************************************************************//**
-+ @Description   Untag frame treatment wrapper
-+*//***************************************************************************/
-+typedef enum fm_macsec_untag_frame_treatment {
-+	UNTAG_DELIVER_UNCTRL_DISCARD_CTRL = \
-+		e_FM_MACSEC_UNTAG_FRAME_TREATMENT_DELIVER_UNCONTROLLED_DISCARD_CONTROLLED,
-+	UNTAG_DISCARD_BOTH = e_FM_MACSEC_UNTAG_FRAME_TREATMENT_DISCARD_BOTH,
-+	UNTAG_DISCARD_UNCTRL_DELIVER_CTRL_UNMODIFIED = \
-+		e_FM_MACSEC_UNTAG_FRAME_TREATMENT_DISCARD_UNCONTROLLED_DELIVER_CONTROLLED_UNMODIFIED
-+} fm_macsec_untag_frame_treatment;
-+
-+/**************************************************************************//**
-+@Description   MACSEC SECY Cipher Suite wrapper
-+*//***************************************************************************/
-+typedef enum fm_macsec_secy_cipher_suite {
-+	SECY_GCM_AES_128 = e_FM_MACSEC_SECY_GCM_AES_128,    /**< GCM-AES-128 */
-+#if (DPAA_VERSION >= 11)
-+	SECY_GCM_AES_256 = e_FM_MACSEC_SECY_GCM_AES_256     /**< GCM-AES-256 */
-+#endif /* (DPAA_VERSION >= 11) */
-+} fm_macsec_secy_cipher_suite;
-+
-+/**************************************************************************//**
-+ @Description   MACSEC SECY Exceptions wrapper
-+*//***************************************************************************/
-+typedef enum fm_macsec_secy_exception {
-+	SECY_EX_FRAME_DISCARDED = e_FM_MACSEC_SECY_EX_FRAME_DISCARDED
-+} fm_macsec_secy_exception;
-+
-+/**************************************************************************//**
-+ @Description   MACSEC SECY Events wrapper
-+*//***************************************************************************/
-+typedef enum fm_macsec_secy_event {
-+	SECY_EV_NEXT_PN = e_FM_MACSEC_SECY_EV_NEXT_PN
-+} fm_macsec_secy_event;
-+
-+/**************************************************************************//**
-+ @Description   Valid frame behaviors wrapper
-+*//***************************************************************************/
-+typedef enum fm_macsec_valid_frame_behavior {
-+	VALID_FRAME_BEHAVIOR_DISABLE = e_FM_MACSEC_VALID_FRAME_BEHAVIOR_DISABLE,
-+	VALID_FRAME_BEHAVIOR_CHECK = e_FM_MACSEC_VALID_FRAME_BEHAVIOR_CHECK,
-+	VALID_FRAME_BEHAVIOR_STRICT = e_FM_MACSEC_VALID_FRAME_BEHAVIOR_STRICT
-+} fm_macsec_valid_frame_behavior;
-+
-+/**************************************************************************//**
-+ @Description   SCI insertion modes wrapper
-+*//***************************************************************************/
-+typedef enum fm_macsec_sci_insertion_mode {
-+	SCI_INSERTION_MODE_EXPLICIT_SECTAG = \
-+		e_FM_MACSEC_SCI_INSERTION_MODE_EXPLICIT_SECTAG,
-+	SCI_INSERTION_MODE_EXPLICIT_MAC_SA = \
-+		e_FM_MACSEC_SCI_INSERTION_MODE_EXPLICIT_MAC_SA,
-+	SCI_INSERTION_MODE_IMPLICT_PTP = e_FM_MACSEC_SCI_INSERTION_MODE_IMPLICT_PTP
-+} fm_macsec_sci_insertion_mode;
-+
-+typedef macsecSAKey_t macsec_sa_key_t;
-+typedef macsecSCI_t macsec_sci_t;
-+typedef macsecAN_t macsec_an_t;
-+typedef t_Handle handle_t;
-+
-+/**************************************************************************//**
-+ @Function      fm_macsec_secy_exception_callback wrapper
-+ @Description   Exceptions user callback routine, will be called upon an
-+                exception passing the exception identification.
-+ @Param[in]     app_h       A handle to an application layer object; This handle
-+                            will be passed by the driver upon calling this callback.
-+ @Param[in]     exception   The exception.
-+*//***************************************************************************/
-+typedef void (fm_macsec_secy_exception_callback) (handle_t app_h,
-+				fm_macsec_secy_exception exception);
-+
-+/**************************************************************************//**
-+ @Function      fm_macsec_secy_event_callback wrapper
-+ @Description   Events user callback routine, will be called upon an
-+                event passing the event identification.
-+ @Param[in]     app_h       A handle to an application layer object; This handle
-+                            will be passed by the driver upon calling this callback.
-+ @Param[in]     event       The event.
-+*//***************************************************************************/
-+typedef void (fm_macsec_secy_event_callback) (handle_t app_h,
-+				fm_macsec_secy_event event);
-+
-+/**************************************************************************//**
-+ @Function      fm_macsec_exception_callback wrapper
-+ @Description   Exceptions user callback routine, will be called upon an
-+                exception passing the exception identification.
-+ @Param[in]     app_h       A handle to an application layer object; This handle
-+                            will be passed by the driver upon calling this callback.
-+ @Param[in]     exception   The exception.
-+*//***************************************************************************/
-+typedef void (fm_macsec_exception_callback) (handle_t app_h,
-+				fm_macsec_exception exception);
-+
-+/**************************************************************************//**
-+ @Description   MACSEC SecY SC Params wrapper
-+*//***************************************************************************/
-+struct fm_macsec_secy_sc_params {
-+	macsec_sci_t sci;
-+	fm_macsec_secy_cipher_suite cipher_suite;
-+};
-+
-+/**************************************************************************//**
-+ @Description   FM MACSEC SecY config input wrapper
-+*//***************************************************************************/
-+struct fm_macsec_secy_params {
-+	handle_t fm_macsec_h;
-+	struct fm_macsec_secy_sc_params tx_sc_params;
-+	uint32_t num_receive_channels;
-+	fm_macsec_secy_exception_callback *exception_f;
-+	fm_macsec_secy_event_callback *event_f;
-+	handle_t app_h;
-+};
-+
-+/**************************************************************************//**
-+ @Description   FM MACSEC config input wrapper
-+*//***************************************************************************/
-+struct fm_macsec_params {
-+	handle_t fm_h;
-+	bool guest_mode;
-+
-+	union {
-+		struct {
-+			uint8_t fm_mac_id;
-+		} guest_params;
-+
-+		struct {
-+			uintptr_t base_addr;
-+			handle_t fm_mac_h;
-+			fm_macsec_exception_callback *exception_f;
-+			handle_t app_h;
-+		} non_guest_params;
-+	};
-+
-+};
-+
-+/**************************************************************************//**
-+ @Description	FM device opaque structure used for type checking
-+*//***************************************************************************/
-+struct fm;
-+
-+/**************************************************************************//**
-+ @Description	FM MAC device opaque structure used for type checking
-+*//***************************************************************************/
-+struct fm_mac_dev;
-+
-+/**************************************************************************//**
-+ @Description	FM MACSEC device opaque structure used for type checking
-+*//***************************************************************************/
-+struct fm_macsec_dev;
-+struct fm_macsec_secy_dev;
-+
-+/**************************************************************************//**
-+ @Description	A structure ..,
-+*//***************************************************************************/
-+struct fm_port;
-+
-+typedef int (*alloc_pcd_fqids)(struct device *dev, uint32_t num,
-+			       uint8_t alignment, uint32_t *base_fqid);
-+
-+typedef int (*free_pcd_fqids)(struct device *dev, uint32_t base_fqid);
-+
-+struct fm_port_pcd_param {
-+	alloc_pcd_fqids	 cba;
-+	free_pcd_fqids	 cbf;
-+	struct device	*dev;
-+};
-+
-+/**************************************************************************//**
-+ @Description	A structure of information about each of the external
-+		buffer pools used by the port,
-+*//***************************************************************************/
-+struct fm_port_pool_param {
-+	uint8_t		id;		/**< External buffer pool id */
-+	uint16_t	size;		/**< External buffer pool buffer size */
-+};
-+
-+/**************************************************************************//**
-+ @Description   structure for additional port parameters
-+*//***************************************************************************/
-+struct fm_port_params {
-+	uint32_t errq;	    /**< Error Queue Id. */
-+	uint32_t defq;	    /**< For Tx and HC - Default Confirmation queue,
-+				 0 means no Tx conf for processed frames.
-+				 For Rx and OP - default Rx queue. */
-+	uint8_t	num_pools;  /**< Number of pools use by this port */
-+	struct fm_port_pool_param pool_param[FM_PORT_MAX_NUM_OF_EXT_POOLS];
-+			    /**< Parameters for each pool */
-+	uint16_t priv_data_size;  /**< Area that user may save for his own
-+				       need (E.g. save the SKB) */
-+	bool parse_results; /**< Put the parser-results in the Rx/Tx buffer */
-+	bool hash_results;  /**< Put the hash-results in the Rx/Tx buffer */
-+	bool time_stamp;    /**< Put the time-stamp in the Rx/Tx buffer */
-+	bool frag_enable;   /**< Fragmentation support, for OP only */
-+	uint16_t data_align;  /**< value for selecting a data alignment (must be a power of 2);
-+                               if write optimization is used, must be >= 16. */
-+	uint8_t manip_extra_space;  /**< Maximum extra size needed (insertion-size minus removal-size);
-+                                     Note that this field impacts the size of the buffer-prefix
-+                                     (i.e. it pushes the data offset); */
-+};
-+
-+/**************************************************************************//**
-+ @Function	fm_bind
-+
-+ @Description	Bind to a specific FM device.
-+
-+ @Param[in]	fm_dev	- the OF handle of the FM device.
-+
-+ @Return	A handle of the FM device.
-+
-+ @Cautions	Allowed only after the port was created.
-+*//***************************************************************************/
-+struct fm *fm_bind(struct device *fm_dev);
-+
-+/**************************************************************************//**
-+ @Function	fm_unbind
-+
-+ @Description	Un-bind from a specific FM device.
-+
-+ @Param[in]	fm	- A handle of the FM device.
-+
-+ @Cautions	Allowed only after the port was created.
-+*//***************************************************************************/
-+void fm_unbind(struct fm *fm);
-+
-+void *fm_get_handle(struct fm *fm);
-+void *fm_get_rtc_handle(struct fm *fm);
-+struct resource *fm_get_mem_region(struct fm *fm);
-+
-+/**************************************************************************//**
-+ @Function	fm_port_bind
-+
-+ @Description	Bind to a specific FM-port device (may be Rx or Tx port).
-+
-+ @Param[in]	fm_port_dev - the OF handle of the FM port device.
-+
-+ @Return	A handle of the FM port device.
-+
-+ @Cautions	Allowed only after the port was created.
-+*//***************************************************************************/
-+struct fm_port *fm_port_bind(struct device *fm_port_dev);
-+
-+/**************************************************************************//**
-+ @Function	fm_port_unbind
-+
-+ @Description	Un-bind from a specific FM-port device (may be Rx or Tx port).
-+
-+ @Param[in]	port	- A handle of the FM port device.
-+
-+ @Cautions	Allowed only after the port was created.
-+*//***************************************************************************/
-+void fm_port_unbind(struct fm_port *port);
-+
-+/**************************************************************************//**
-+ @Function	fm_set_rx_port_params
-+
-+ @Description	Configure parameters for a specific Rx FM-port device.
-+
-+ @Param[in]	port	- A handle of the FM port device.
-+ @Param[in]	params	- Rx port parameters
-+
-+ @Cautions	Allowed only after the port is binded.
-+*//***************************************************************************/
-+void fm_set_rx_port_params(struct fm_port *port,
-+			   struct fm_port_params *params);
-+
-+/**************************************************************************//**
-+ @Function	fm_port_pcd_bind
-+
-+ @Description	Bind as a listener on a port PCD.
-+
-+ @Param[in]	port	- A handle of the FM port device.
-+ @Param[in]	params	- PCD port parameters
-+
-+ @Cautions	Allowed only after the port is binded.
-+*//***************************************************************************/
-+void fm_port_pcd_bind (struct fm_port *port, struct fm_port_pcd_param *params);
-+
-+/**************************************************************************//**
-+ @Function	fm_port_get_buff_layout_ext_params
-+
-+ @Description	Get data_align and manip_extra_space from the device tree
-+                chosen node if applied.
-+                This function will only update these two parameters.
-+                When this port has no such parameters in the device tree
-+                values will be set to 0.
-+
-+ @Param[in]	port	- A handle of the FM port device.
-+ @Param[in]	params	- PCD port parameters
-+
-+ @Cautions	Allowed only after the port is binded.
-+*//***************************************************************************/
-+void fm_port_get_buff_layout_ext_params(struct fm_port *port, struct fm_port_params *params);
-+
-+/**************************************************************************//**
-+ @Function	fm_get_tx_port_channel
-+
-+ @Description	Get qman-channel number for this Tx port.
-+
-+ @Param[in]	port	- A handle of the FM port device.
-+
-+ @Return	qman-channel number for this Tx port.
-+
-+ @Cautions	Allowed only after the port is binded.
-+*//***************************************************************************/
-+uint16_t fm_get_tx_port_channel(struct fm_port *port);
-+
-+/**************************************************************************//**
-+ @Function	fm_set_tx_port_params
-+
-+ @Description	Configure parameters for a specific Tx FM-port device
-+
-+ @Param[in]	port	- A handle of the FM port device.
-+ @Param[in]	params	- Tx port parameters
-+
-+ @Cautions	Allowed only after the port is binded.
-+*//***************************************************************************/
-+void fm_set_tx_port_params(struct fm_port *port, struct fm_port_params *params);
-+
-+
-+/**************************************************************************//**
-+ @Function	fm_mac_set_handle
-+
-+ @Description	Set mac handle
-+
-+ @Param[in]	h_lnx_wrp_fm_dev - A handle of the LnxWrp FM device.
-+ @Param[in]	h_fm_mac	 - A handle of the LnxWrp FM MAC device.
-+ @Param[in]	mac_id		 - MAC id.
-+*//***************************************************************************/
-+void fm_mac_set_handle(t_Handle h_lnx_wrp_fm_dev, t_Handle h_fm_mac,
-+		       int mac_id);
-+
-+/**************************************************************************//**
-+ @Function	fm_port_enable
-+
-+ @Description	Enable specific FM-port device (may be Rx or Tx port).
-+
-+ @Param[in]	port	- A handle of the FM port device.
-+
-+ @Cautions	Allowed only after the port is initialized.
-+*//***************************************************************************/
-+int fm_port_enable(struct fm_port *port);
-+
-+/**************************************************************************//**
-+ @Function	fm_port_disable
-+
-+ @Description	Disable specific FM-port device (may be Rx or Tx port).
-+
-+ @Param[in]	port	- A handle of the FM port device.
-+
-+ @Cautions	Allowed only after the port is initialized.
-+*//***************************************************************************/
-+int fm_port_disable(struct fm_port *port);
-+
-+void *fm_port_get_handle(const struct fm_port *port);
-+
-+u64 *fm_port_get_buffer_time_stamp(const struct fm_port *port,
-+		const void *data);
-+
-+/**************************************************************************//**
-+ @Function	fm_port_get_base_address
-+
-+ @Description	Get base address of this port. Useful for accessing
-+		port-specific registers (i.e., not common ones).
-+
-+ @Param[in]	port		- A handle of the FM port device.
-+
-+ @Param[out]	base_addr	- The port's base addr (virtual address).
-+*//***************************************************************************/
-+void fm_port_get_base_addr(const struct fm_port *port, uint64_t *base_addr);
-+
-+/**************************************************************************//**
-+ @Function	fm_mutex_lock
-+
-+ @Description   Lock function required before any FMD/LLD call.
-+*//***************************************************************************/
-+void fm_mutex_lock(void);
-+
-+/**************************************************************************//**
-+ @Function	fm_mutex_unlock
-+
-+ @Description   Unlock function required after any FMD/LLD call.
-+*//***************************************************************************/
-+void fm_mutex_unlock(void);
-+
-+/**************************************************************************//**
-+ @Function	fm_get_max_frm
-+
-+ @Description   Get the maximum frame size
-+*//***************************************************************************/
-+int fm_get_max_frm(void);
-+
-+/**************************************************************************//**
-+ @Function	fm_get_rx_extra_headroom
-+
-+ @Description   Get the extra headroom size
-+*//***************************************************************************/
-+int fm_get_rx_extra_headroom(void);
-+
-+/**************************************************************************//**
-+@Function     fm_port_set_rate_limit
-+
-+@Description  Configure Shaper parameter on FM-port device (Tx port).
-+
-+@Param[in]    port   - A handle of the FM port device.
-+@Param[in]    max_burst_size - Value of maximum burst size allowed.
-+@Param[in]    rate_limit     - The required rate value.
-+
-+@Cautions     Allowed only after the port is initialized.
-+*//***************************************************************************/
-+int fm_port_set_rate_limit(struct fm_port *port,
-+                           uint16_t max_burst_size,
-+                           uint32_t rate_limit);
-+/**************************************************************************//**
-+@Function     fm_port_set_rate_limit
-+
-+@Description  Delete Shaper configuration on FM-port device (Tx port).
-+
-+@Param[in]    port   - A handle of the FM port device.
-+
-+@Cautions     Allowed only after the port is initialized.
-+*//***************************************************************************/
-+int fm_port_del_rate_limit(struct fm_port *port);
-+
-+struct   auto_res_tables_sizes
-+{
-+	uint16_t   max_num_of_arp_entries;
-+	uint16_t   max_num_of_echo_ipv4_entries;
-+	uint16_t   max_num_of_ndp_entries;
-+	uint16_t   max_num_of_echo_ipv6_entries;
-+	uint16_t   max_num_of_snmp_ipv4_entries;
-+	uint16_t   max_num_of_snmp_ipv6_entries;
-+	uint16_t   max_num_of_snmp_oid_entries;
-+	uint16_t   max_num_of_snmp_char; /* total amount of character needed
-+		for the snmp table */
-+	uint16_t   max_num_of_ip_prot_filtering;
-+	uint16_t   max_num_of_tcp_port_filtering;
-+	uint16_t   max_num_of_udp_port_filtering;
-+};
-+/* ARP */
-+struct   auto_res_arp_entry
-+{
-+	uint32_t  ip_address;
-+	uint8_t   mac[6];
-+	bool      is_vlan;
-+	uint16_t  vid;
-+};
-+struct   auto_res_arp_info
-+{
-+	uint8_t                     table_size;
-+	struct auto_res_arp_entry   *auto_res_table;
-+	bool                        enable_conflict_detection; /* when TRUE
-+		Conflict Detection will be checked and wake the host if
-+		needed */
-+};
-+
-+/* NDP */
-+struct   auto_res_ndp_entry
-+{
-+	uint32_t  ip_address[4];
-+	uint8_t   mac[6];
-+	bool      is_vlan;
-+	uint16_t  vid;
-+};
-+struct   auto_res_ndp_info
-+{
-+	uint32_t                    multicast_group;
-+	uint8_t                     table_size_assigned;
-+	struct auto_res_ndp_entry   *auto_res_table_assigned; /* This list
-+		refer to solicitation IP addresses. Note that all IP adresses
-+		must be from the same multicast group. This will be checked and
-+		if not operation will fail. */
-+	uint8_t                     table_size_tmp;
-+	struct auto_res_ndp_entry   *auto_res_table_tmp;      /* This list
-+		refer to temp IP addresses. Note that all temp IP adresses must
-+		be from the same multicast group. This will be checked and if
-+		not operation will fail. */
-+
-+	bool                        enable_conflict_detection; /* when TRUE
-+		Conflict Detection will be checked and wake the host if
-+		needed */
-+};
-+
-+/* ICMP ECHO */
-+struct   auto_res_echo_ipv4_info
-+{
-+	uint8_t                     table_size;
-+	struct auto_res_arp_entry  *auto_res_table;
-+};
-+
-+struct   auto_res_echo_ipv6_info
-+{
-+	uint8_t                     table_size;
-+	struct auto_res_ndp_entry  *auto_res_table;
-+};
-+
-+/* SNMP */
-+struct   auto_res_snmp_entry
-+{
-+	uint16_t     oidSize;
-+	uint8_t      *oidVal; /* only the oid string */
-+	uint16_t     resSize;
-+	uint8_t      *resVal; /* resVal will be the entire reply,
-+				i.e. "Type|Length|Value" */
-+};
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response SNMP IPv4 Addresses Table Entry
-+                Refer to the FMan Controller spec for more details.
-+*//***************************************************************************/
-+struct auto_res_snmp_ipv4addr_tbl_entry
-+{
-+	uint32_t ipv4addr; /*!< 32 bit IPv4 Address. */
-+	bool      is_vlan;
-+	uint16_t vid;   /*!< 12 bits VLAN ID. The 4 left-most bits should be cleared                      */
-+			/*!< This field should be 0x0000 for an entry with no VLAN tag or a null VLAN ID. */
-+};
-+
-+/**************************************************************************//**
-+ @Description   Deep Sleep Auto Response SNMP IPv6 Addresses Table Entry
-+                Refer to the FMan Controller spec for more details.
-+*//***************************************************************************/
-+struct auto_res_snmp_ipv6addr_tbl_entry
-+{
-+	uint32_t ipv6Addr[4];  /*!< 4 * 32 bit IPv6 Address.                                                     */
-+	bool      isVlan;
-+	uint16_t vid;       /*!< 12 bits VLAN ID. The 4 left-most bits should be cleared                      */
-+			/*!< This field should be 0x0000 for an entry with no VLAN tag or a null VLAN ID. */
-+};
-+
-+struct   auto_res_snmp_info
-+{
-+	uint16_t control;                          /**< Control bits [0-15]. */
-+	uint16_t max_snmp_msg_length;              /**< Maximal allowed SNMP message length. */
-+	uint16_t num_ipv4_addresses;               /**< Number of entries in IPv4 addresses table. */
-+	uint16_t num_ipv6_addresses;               /**< Number of entries in IPv6 addresses table. */
-+	struct auto_res_snmp_ipv4addr_tbl_entry *ipv4addr_tbl; /**< Pointer to IPv4 addresses table. */
-+	struct auto_res_snmp_ipv6addr_tbl_entry *ipv6addr_tbl; /**< Pointer to IPv6 addresses table. */
-+	char                        *community_read_write_string;
-+	char                        *community_read_only_string;
-+	struct auto_res_snmp_entry  *oid_table;
-+	uint32_t                     oid_table_size;
-+	uint32_t                    *statistics;
-+};
-+
-+/* Filtering */
-+struct   auto_res_port_filtering_entry
-+{
-+	uint16_t    src_port;
-+	uint16_t    dst_port;
-+	uint16_t    src_port_mask;
-+	uint16_t    dst_port_mask;
-+};
-+struct   auto_res_filtering_info
-+{
-+	/* IP protocol filtering parameters */
-+	uint8_t     ip_prot_table_size;
-+	uint8_t     *ip_prot_table_ptr;
-+	bool        ip_prot_pass_on_hit;  /* when TRUE, miss in the table will
-+		cause the packet to be droped, hit will pass the packet to
-+		UDP/TCP filters if needed and if not to the classification
-+		tree. If the classification tree will pass the packet to a
-+		queue it will cause a wake interupt. When FALSE it the other
-+		way around. */
-+	/* UDP port filtering parameters */
-+	uint8_t     udp_ports_table_size;
-+	struct auto_res_port_filtering_entry *udp_ports_table_ptr;
-+	bool        udp_port_pass_on_hit; /* when TRUE, miss in the table will
-+		cause the packet to be droped, hit will pass the packet to
-+		classification tree. If the classification tree will pass the
-+		packet to a queue it will cause a wake interupt. When FALSE it
-+		the other way around. */
-+    /* TCP port filtering parameters */
-+	uint16_t    tcp_flags_mask;
-+	uint8_t     tcp_ports_table_size;
-+	struct auto_res_port_filtering_entry *tcp_ports_table_ptr;
-+	bool        tcp_port_pass_on_hit; /* when TRUE, miss in the table will
-+		cause the packet to be droped, hit will pass the packet to
-+		classification tree. If the classification tree will pass the
-+		packet to a queue it will cause a wake interupt. When FALSE it
-+		the other way around. */
-+};
-+
-+struct auto_res_port_params
-+{
-+	t_Handle                            h_FmPortTx;
-+	struct   auto_res_arp_info          *p_auto_res_arp_info;
-+	struct   auto_res_echo_ipv4_info    *p_auto_res_echo_ipv4_info;
-+	struct   auto_res_ndp_info          *p_auto_res_ndp_info;
-+	struct   auto_res_echo_ipv6_info    *p_auto_res_echo_ipv6_info;
-+	struct   auto_res_snmp_info         *p_auto_res_snmp_info;
-+	struct   auto_res_filtering_info    *p_auto_res_filtering_info;
-+};
-+
-+struct auto_res_port_stats
-+{
-+    uint32_t arp_ar_cnt;
-+    uint32_t echo_icmpv4_ar_cnt;
-+    uint32_t ndp_ar_cnt;
-+    uint32_t echo_icmpv6_ar_cnt;
-+};
-+
-+int fm_port_config_autores_for_deepsleep_support(struct fm_port *port,
-+	struct auto_res_tables_sizes *params);
-+
-+int fm_port_enter_autores_for_deepsleep(struct fm_port *port,
-+	struct auto_res_port_params *params);
-+
-+void fm_port_exit_auto_res_for_deep_sleep(struct fm_port *port_rx,
-+	struct fm_port *port_tx);
-+
-+bool fm_port_is_in_auto_res_mode(struct fm_port *port);
-+
-+struct auto_res_tables_sizes *fm_port_get_autores_maxsize(
-+	struct fm_port *port);
-+
-+int fm_port_get_autores_stats(struct fm_port *port, struct auto_res_port_stats
-+	*stats);
-+
-+int fm_port_resume(struct fm_port *port);
-+
-+int fm_port_suspend(struct fm_port *port);
-+
-+#ifdef CONFIG_FMAN_PFC
-+/**************************************************************************//**
-+@Function     fm_port_set_pfc_priorities_mapping_to_qman_wq
-+
-+@Description  Associate a QMan Work Queue with a PFC priority on this
-+		FM-port device (Tx port).
-+
-+@Param[in]    port   - A handle of the FM port device.
-+
-+@Param[in]    prio   - The PFC priority.
-+
-+@Param[in]    wq   - The Work Queue associated with the PFC priority.
-+
-+@Cautions     Allowed only after the port is initialized.
-+*//***************************************************************************/
-+int fm_port_set_pfc_priorities_mapping_to_qman_wq(struct fm_port *port,
-+		uint8_t prio, uint8_t wq);
-+#endif
-+
-+/**************************************************************************//**
-+@Function     fm_mac_set_exception
-+
-+@Description  Set MAC exception state.
-+
-+@Param[in]    fm_mac_dev   - A handle of the FM MAC device.
-+@Param[in]    exception    - FM MAC exception type.
-+@Param[in]    enable       - new state.
-+
-+*//***************************************************************************/
-+int fm_mac_set_exception(struct fm_mac_dev *fm_mac_dev,
-+		e_FmMacExceptions exception, bool enable);
-+
-+int fm_mac_free(struct fm_mac_dev *fm_mac_dev);
-+
-+struct fm_mac_dev *fm_mac_config(t_FmMacParams *params);
-+
-+int fm_mac_config_max_frame_length(struct fm_mac_dev *fm_mac_dev,
-+		int len);
-+
-+int fm_mac_config_pad_and_crc(struct fm_mac_dev *fm_mac_dev, bool enable);
-+
-+int fm_mac_config_half_duplex(struct fm_mac_dev *fm_mac_dev, bool enable);
-+
-+int fm_mac_config_reset_on_init(struct fm_mac_dev *fm_mac_dev, bool enable);
-+
-+int fm_mac_init(struct fm_mac_dev *fm_mac_dev);
-+
-+int fm_mac_get_version(struct fm_mac_dev *fm_mac_dev, uint32_t *version);
-+
-+int fm_mac_enable(struct fm_mac_dev *fm_mac_dev);
-+
-+int fm_mac_disable(struct fm_mac_dev *fm_mac_dev);
-+
-+int fm_mac_resume(struct fm_mac_dev *fm_mac_dev);
-+
-+int fm_mac_set_promiscuous(struct fm_mac_dev *fm_mac_dev,
-+		bool enable);
-+
-+int fm_mac_remove_hash_mac_addr(struct fm_mac_dev *fm_mac_dev,
-+		t_EnetAddr *mac_addr);
-+
-+int fm_mac_add_hash_mac_addr(struct fm_mac_dev *fm_mac_dev,
-+		t_EnetAddr *mac_addr);
-+
-+int fm_mac_modify_mac_addr(struct fm_mac_dev *fm_mac_dev,
-+					 uint8_t *addr);
-+
-+int fm_mac_adjust_link(struct fm_mac_dev *fm_mac_dev,
-+		bool link, int speed, bool duplex);
-+
-+int fm_mac_enable_1588_time_stamp(struct fm_mac_dev *fm_mac_dev);
-+
-+int fm_mac_disable_1588_time_stamp(struct fm_mac_dev *fm_mac_dev);
-+
-+int fm_mac_set_rx_pause_frames(
-+		struct fm_mac_dev *fm_mac_dev, bool en);
-+
-+int fm_mac_set_tx_pause_frames(struct fm_mac_dev *fm_mac_dev,
-+					     bool en);
-+
-+int fm_rtc_enable(struct fm *fm_dev);
-+
-+int fm_rtc_disable(struct fm *fm_dev);
-+
-+int fm_rtc_get_cnt(struct fm *fm_dev, uint64_t *ts);
-+
-+int fm_rtc_set_cnt(struct fm *fm_dev, uint64_t ts);
-+
-+int fm_rtc_get_drift(struct fm *fm_dev, uint32_t *drift);
-+
-+int fm_rtc_set_drift(struct fm *fm_dev, uint32_t drift);
-+
-+int fm_rtc_set_alarm(struct fm *fm_dev, uint32_t id,
-+		uint64_t time);
-+
-+int fm_rtc_set_fiper(struct fm *fm_dev, uint32_t id,
-+		uint64_t fiper);
-+
-+int fm_mac_set_wol(struct fm_port *port, struct fm_mac_dev *fm_mac_dev,
-+			bool en);
-+
-+/**************************************************************************//**
-+@Function     fm_macsec_set_exception
-+
-+@Description  Set MACSEC exception state.
-+
-+@Param[in]    fm_macsec_dev   - A handle of the FM MACSEC device.
-+@Param[in]    exception    - FM MACSEC exception type.
-+@Param[in]    enable       - new state.
-+
-+*//***************************************************************************/
-+
-+int fm_macsec_set_exception(struct fm_macsec_dev *fm_macsec_dev,
-+			fm_macsec_exception exception, bool enable);
-+int fm_macsec_free(struct fm_macsec_dev *fm_macsec_dev);
-+struct fm_macsec_dev *fm_macsec_config(struct fm_macsec_params *fm_params);
-+int fm_macsec_init(struct fm_macsec_dev *fm_macsec_dev);
-+int fm_macsec_config_unknown_sci_frame_treatment(struct fm_macsec_dev
-+				*fm_macsec_dev,
-+				fm_macsec_unknown_sci_frame_treatment treat_mode);
-+int fm_macsec_config_invalid_tags_frame_treatment(struct fm_macsec_dev *fm_macsec_dev,
-+				bool deliver_uncontrolled);
-+int fm_macsec_config_kay_frame_treatment(struct fm_macsec_dev *fm_macsec_dev,
-+				bool discard_uncontrolled);
-+int fm_macsec_config_untag_frame_treatment(struct fm_macsec_dev *fm_macsec_dev,
-+				    fm_macsec_untag_frame_treatment treat_mode);
-+int fm_macsec_config_pn_exhaustion_threshold(struct fm_macsec_dev *fm_macsec_dev,
-+					uint32_t pnExhThr);
-+int fm_macsec_config_keys_unreadable(struct fm_macsec_dev *fm_macsec_dev);
-+int fm_macsec_config_sectag_without_sci(struct fm_macsec_dev *fm_macsec_dev);
-+int fm_macsec_config_exception(struct fm_macsec_dev *fm_macsec_dev,
-+			    fm_macsec_exception exception, bool enable);
-+int fm_macsec_get_revision(struct fm_macsec_dev *fm_macsec_dev,
-+			    int *macsec_revision);
-+int fm_macsec_enable(struct fm_macsec_dev *fm_macsec_dev);
-+int fm_macsec_disable(struct fm_macsec_dev *fm_macsec_dev);
-+
-+
-+int fm_macsec_secy_config_exception(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				    fm_macsec_secy_exception exception,
-+				    bool enable);
-+int fm_macsec_secy_free(struct fm_macsec_secy_dev *fm_macsec_secy_dev);
-+struct fm_macsec_secy_dev *fm_macsec_secy_config(struct fm_macsec_secy_params *secy_params);
-+int fm_macsec_secy_init(struct fm_macsec_secy_dev *fm_macsec_secy_dev);
-+int fm_macsec_secy_config_sci_insertion_mode(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				fm_macsec_sci_insertion_mode sci_insertion_mode);
-+int fm_macsec_secy_config_protect_frames(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				bool protect_frames);
-+int fm_macsec_secy_config_replay_window(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				bool replay_protect, uint32_t replay_window);
-+int fm_macsec_secy_config_validation_mode(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				fm_macsec_valid_frame_behavior validate_frames);
-+int fm_macsec_secy_config_confidentiality(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				bool confidentiality_enable,
-+				uint32_t confidentiality_offset);
-+int fm_macsec_secy_config_point_to_point(struct fm_macsec_secy_dev *fm_macsec_secy_dev);
-+int fm_macsec_secy_config_event(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				    fm_macsec_secy_event event,
-+				    bool enable);
-+struct rx_sc_dev *fm_macsec_secy_create_rxsc(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				struct fm_macsec_secy_sc_params *params);
-+int fm_macsec_secy_delete_rxsc(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				struct rx_sc_dev *sc);
-+int fm_macsec_secy_create_rx_sa(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				struct rx_sc_dev *sc, macsec_an_t an,
-+				uint32_t lowest_pn, macsec_sa_key_t key);
-+int fm_macsec_secy_delete_rx_sa(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				struct rx_sc_dev *sc, macsec_an_t an);
-+int fm_macsec_secy_rxsa_enable_receive(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					struct rx_sc_dev *sc,
-+					macsec_an_t an);
-+int fm_macsec_secy_rxsa_disable_receive(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					struct rx_sc_dev *sc,
-+					macsec_an_t an);
-+int fm_macsec_secy_rxsa_update_next_pn(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					struct rx_sc_dev *sc,
-+					macsec_an_t an, uint32_t updt_next_pn);
-+int fm_macsec_secy_rxsa_update_lowest_pn(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					struct rx_sc_dev *sc,
-+					macsec_an_t an, uint32_t updt_lowest_pn);
-+int fm_macsec_secy_rxsa_modify_key(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					struct rx_sc_dev *sc,
-+					macsec_an_t an, macsec_sa_key_t key);
-+int fm_macsec_secy_create_tx_sa(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				macsec_an_t an, macsec_sa_key_t key);
-+int fm_macsec_secy_delete_tx_sa(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				macsec_an_t an);
-+int fm_macsec_secy_txsa_modify_key(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					macsec_an_t next_active_an,
-+					macsec_sa_key_t key);
-+int fm_macsec_secy_txsa_set_active(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					macsec_an_t an);
-+int fm_macsec_secy_txsa_get_active(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					macsec_an_t *p_an);
-+int fm_macsec_secy_get_rxsc_phys_id(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				struct rx_sc_dev *sc, uint32_t *sc_phys_id);
-+int fm_macsec_secy_get_txsc_phys_id(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				    uint32_t *sc_phys_id);
-+
-+/** @} */ /* end of FM_LnxKern_ctrl_grp group */
-+/** @} */ /* end of FM_LnxKern_grp group */
-+
-+/* default values for initializing PTP 1588 timer clock */
-+#define DPA_PTP_NOMINAL_FREQ_PERIOD_SHIFT 2 /* power of 2 for better performance */
-+#define DPA_PTP_NOMINAL_FREQ_PERIOD_NS (1 << DPA_PTP_NOMINAL_FREQ_PERIOD_SHIFT) /* 4ns,250MHz */
-+
-+#endif /* __LNXWRP_FSL_FMAN_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/inc/xx/xx.h
-@@ -0,0 +1,50 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __XX_H
-+#define __XX_H
-+
-+#include "xx_ext.h"
-+
-+void * xx_Malloc(uint32_t n);
-+void xx_Free(void *p);
-+
-+void *xx_MallocSmart(uint32_t size, int memPartitionId, uint32_t align);
-+void xx_FreeSmart(void *p);
-+
-+/* never used: */
-+#define GetDeviceName(irq) ((char *)NULL)
-+
-+int     GetDeviceIrqNum(int irq);
-+
-+
-+#endif /* __XX_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/system/Makefile
-@@ -0,0 +1,10 @@
-+#
-+# Makefile for the Freescale Ethernet controllers
-+#
-+ccflags-y           += -DVERSION=\"\"
-+#
-+#Include netcomm SW specific definitions
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+#
-+
-+obj-y		+= sys_io.o
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/system/sys_io.c
-@@ -0,0 +1,171 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/version.h>
-+
-+#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
-+#define MODVERSIONS
-+#endif
-+#ifdef MODVERSIONS
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-+#include <linux/modversions.h>
-+#else
-+#include <config/modversions.h>
-+#endif    /* LINUX_VERSION_CODE */
-+#endif /* MODVERSIONS */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+
-+#include <asm/io.h>
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "string_ext.h"
-+#include "list_ext.h"
-+#include "sys_io_ext.h"
-+
-+
-+#define __ERR_MODULE__      MODULE_UNKNOWN
-+
-+
-+typedef struct {
-+    uint64_t    virtAddr;
-+    uint64_t    physAddr;
-+    uint32_t    size;
-+    t_List      node;
-+} t_IoMap;
-+#define IOMAP_OBJECT(ptr)  LIST_OBJECT(ptr, t_IoMap, node)
-+
-+LIST(mapsList);
-+
-+
-+static void EnqueueIoMap(t_IoMap *p_IoMap)
-+{
-+    uint32_t   intFlags;
-+
-+    intFlags = XX_DisableAllIntr();
-+    LIST_AddToTail(&p_IoMap->node, &mapsList);
-+    XX_RestoreAllIntr(intFlags);
-+}
-+
-+static t_IoMap * FindIoMapByVirtAddr(uint64_t addr)
-+{
-+    t_IoMap     *p_IoMap;
-+    t_List      *p_Pos;
-+
-+    LIST_FOR_EACH(p_Pos, &mapsList)
-+    {
-+        p_IoMap = IOMAP_OBJECT(p_Pos);
-+        if ((addr >= p_IoMap->virtAddr) && (addr < p_IoMap->virtAddr+p_IoMap->size))
-+            return p_IoMap;
-+    }
-+
-+    return NULL;
-+}
-+
-+static t_IoMap * FindIoMapByPhysAddr(uint64_t addr)
-+{
-+    t_IoMap     *p_IoMap;
-+    t_List      *p_Pos;
-+
-+    LIST_FOR_EACH(p_Pos, &mapsList)
-+    {
-+        p_IoMap = IOMAP_OBJECT(p_Pos);
-+        if ((addr >= p_IoMap->physAddr) && (addr < p_IoMap->physAddr+p_IoMap->size))
-+            return p_IoMap;
-+    }
-+
-+    return NULL;
-+}
-+
-+t_Error SYS_RegisterIoMap (uint64_t virtAddr, uint64_t physAddr, uint32_t size)
-+{
-+    t_IoMap *p_IoMap;
-+
-+    p_IoMap = (t_IoMap*)XX_Malloc(sizeof(t_IoMap));
-+    if (!p_IoMap)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("message handler object!!!"));
-+    memset(p_IoMap, 0, sizeof(t_IoMap));
-+
-+    p_IoMap->virtAddr = virtAddr;
-+    p_IoMap->physAddr = physAddr;
-+    p_IoMap->size     = size;
-+
-+    INIT_LIST(&p_IoMap->node);
-+    EnqueueIoMap(p_IoMap);
-+
-+    return E_OK;
-+}
-+
-+t_Error SYS_UnregisterIoMap  (uint64_t virtAddr)
-+{
-+    t_IoMap *p_IoMap = FindIoMapByVirtAddr(virtAddr);
-+    if (!p_IoMap)
-+        RETURN_ERROR(MINOR, E_NO_DEVICE, ("message handler not found in list!!!"));
-+
-+    LIST_Del(&p_IoMap->node);
-+    XX_Free(p_IoMap);
-+
-+    return E_OK;
-+}
-+
-+uint64_t SYS_PhysToVirt(uint64_t addr)
-+{
-+    t_IoMap *p_IoMap = FindIoMapByPhysAddr(addr);
-+    if (p_IoMap)
-+    {
-+        /* This is optimization - put the latest in the list-head - like a cache */
-+        if (mapsList.p_Next != &p_IoMap->node)
-+        {
-+            uint32_t intFlags = XX_DisableAllIntr();
-+            LIST_DelAndInit(&p_IoMap->node);
-+            LIST_Add(&p_IoMap->node, &mapsList);
-+            XX_RestoreAllIntr(intFlags);
-+        }
-+        return (uint64_t)(addr - p_IoMap->physAddr + p_IoMap->virtAddr);
-+    }
-+    return PTR_TO_UINT(phys_to_virt((unsigned long)addr));
-+}
-+
-+uint64_t SYS_VirtToPhys(uint64_t addr)
-+{
-+    t_IoMap *p_IoMap;
-+
-+    if (addr == 0)
-+        return 0;
-+
-+    p_IoMap = FindIoMapByVirtAddr(addr);
-+    if (p_IoMap)
-+        return (uint64_t)(addr - p_IoMap->virtAddr + p_IoMap->physAddr);
-+    return (uint64_t)virt_to_phys(UINT_TO_PTR(addr));
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/Makefile
-@@ -0,0 +1,19 @@
-+#
-+# Makefile for the Freescale Ethernet controllers
-+#
-+ccflags-y           += -DVERSION=\"\"
-+#
-+#Include netcomm SW specific definitions
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+
-+NCSW_FM_INC = $(srctree)/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/inc
-+
-+ccflags-y += -I$(NCSW_FM_INC)
-+ccflags-y += -I$(NET_DPA)
-+
-+obj-y		+= fsl-ncsw-PFM.o
-+obj-$(CONFIG_FSL_SDK_FMAN_TEST)	+= fman_test.o
-+
-+fsl-ncsw-PFM-objs	:=	lnxwrp_fm.o lnxwrp_fm_port.o lnxwrp_ioctls_fm.o \
-+				lnxwrp_sysfs.o lnxwrp_sysfs_fm.o lnxwrp_sysfs_fm_port.o 
-+obj-$(CONFIG_COMPAT)     +=   lnxwrp_ioctls_fm_compat.o
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/fman_test.c
-@@ -0,0 +1,1665 @@
-+/* Copyright (c) 2008-2011 Freescale Semiconductor, Inc.
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/*
-+ @File          fman_test.c
-+ @Authors       Pistirica Sorin Andrei
-+ @Description   FM Linux test environment
-+*/
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/fs.h>
-+#include <linux/cdev.h>
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/of_platform.h>
-+#include <linux/ip.h>
-+#include <linux/compat.h>
-+#include <linux/uaccess.h>
-+#include <linux/errno.h>
-+#include <linux/netdevice.h>
-+#include <linux/spinlock.h>
-+#include <linux/types.h>
-+#include <linux/fsl_qman.h>
-+#include <linux/fsl_bman.h>
-+
-+/* private headers */
-+#include "fm_ext.h"
-+#include "lnxwrp_fsl_fman.h"
-+#include "fm_port_ext.h"
-+#if (DPAA_VERSION == 11)
-+#include "../../Peripherals/FM/MAC/memac.h"
-+#endif
-+#include "fm_test_ioctls.h"
-+#include "fsl_fman_test.h"
-+
-+#include "dpaa_eth.h"
-+#include "dpaa_eth_common.h"
-+
-+#define FMT_FRM_WATERMARK   0xdeadbeefdeadbeeaLL
-+
-+struct fmt_frame_s {
-+	ioc_fmt_buff_desc_t	buff;
-+	struct list_head	list;
-+};
-+
-+struct fmt_fqs_s {
-+	struct qman_fq		fq_base;
-+	bool			init;
-+	struct fmt_port_s	*fmt_port_priv;
-+};
-+
-+struct fmt_port_pcd_s {
-+	int		 num_queues;
-+	struct fmt_fqs_s *fmt_pcd_fqs;
-+	uint32_t	 fqid_base;
-+};
-+
-+/* char dev structure: fm test port */
-+struct fmt_port_s {
-+	bool                valid;
-+	uint8_t             id;
-+	ioc_fmt_port_type   port_type;
-+	ioc_diag_mode       diag;
-+	bool		    compat_test_type;
-+
-+	/* fm ports */
-+	/* ! for oh ports p_tx_fm_port_dev == p_rx_fm_port_dev &&
-+	 * p_tx_port == p_rx_port */
-+				/* t_LnxWrpFmPortDev */
-+	struct fm_port      *p_tx_port;
-+				/* t_LnxWrpFmPortDev->h_Dev: t_FmPort */
-+	void                *p_tx_fm_port_dev;
-+				/* t_LnxWrpFmPortDev */
-+	struct fm_port      *p_rx_port;
-+				/* t_LnxWrpFmPortDev->h_Dev: t_FmPort */
-+	void                *p_rx_fm_port_dev;
-+
-+	void                *p_mac_dev;
-+	uint64_t            fm_phys_base_addr;
-+
-+	/* read/write queue manipulation */
-+	spinlock_t          rx_q_lock;
-+	struct list_head    rx_q;
-+
-+	/* tx queuee for injecting traffic */
-+	int                 num_of_tx_fqs;
-+	struct fmt_fqs_s    p_tx_fqs[FMAN_TEST_MAX_TX_FQS];
-+
-+	/* pcd private queues manipulation */
-+	struct fmt_port_pcd_s fmt_port_pcd;
-+
-+	/* debugging stuff */
-+
-+#if defined(FMT_K_DBG) || defined(FMT_K_DBG_RUNTIME)
-+	atomic_t enqueue_to_qman_frm;
-+	atomic_t enqueue_to_rxq;
-+	atomic_t dequeue_from_rxq;
-+	atomic_t not_enqueue_to_rxq_wrong_frm;
-+#endif
-+
-+};
-+
-+/* The devices. */
-+struct fmt_s {
-+	int major;
-+	struct fmt_port_s ports[IOC_FMT_MAX_NUM_OF_PORTS];
-+	struct class *fmt_class;
-+};
-+
-+/* fm test structure */
-+static struct fmt_s fm_test;
-+
-+#if (DPAA_VERSION == 11)
-+struct mac_priv_s {
-+        t_Handle        mac;
-+};
-+#endif
-+
-+#define DTSEC_BASE_ADDR         0x000e0000
-+#define DTSEC_MEM_RANGE         0x00002000
-+#define MAC_1G_MACCFG1          0x00000100
-+#define MAC_1G_LOOP_MASK        0x00000100
-+static int set_1gmac_loopback(
-+		struct fmt_port_s *fmt_port,
-+		bool en)
-+{
-+#if (DPAA_VERSION <= 10)
-+	uint32_t dtsec_idx = fmt_port->id; /* dtsec for which port */
-+	uint32_t dtsec_idx_off = dtsec_idx * DTSEC_MEM_RANGE;
-+	phys_addr_t maccfg1_hw;
-+	void *maccfg1_map;
-+	uint32_t maccfg1_val;
-+
-+	/* compute the maccfg1 register address */
-+	maccfg1_hw = fmt_port->fm_phys_base_addr +
-+			(phys_addr_t)(DTSEC_BASE_ADDR +
-+					dtsec_idx_off +
-+					MAC_1G_MACCFG1);
-+
-+	/* map register */
-+	maccfg1_map = ioremap(maccfg1_hw, sizeof(u32));
-+
-+	/* set register */
-+	maccfg1_val = in_be32(maccfg1_map);
-+	if (en)
-+		maccfg1_val |= MAC_1G_LOOP_MASK;
-+	else
-+		maccfg1_val &= ~MAC_1G_LOOP_MASK;
-+	out_be32(maccfg1_map, maccfg1_val);
-+
-+	/* unmap register */
-+	iounmap(maccfg1_map);
-+#else
-+	struct mac_device *mac_dev;
-+	struct mac_priv_s *priv;
-+	t_Memac *p_memac;
-+
-+	if (!fmt_port)
-+		return -EINVAL;
-+
-+	mac_dev = (struct mac_device *)fmt_port->p_mac_dev;
-+
-+	if (!mac_dev)
-+		return -EINVAL;
-+
-+	priv = macdev_priv(mac_dev);
-+
-+	if (!priv)
-+		return -EINVAL;
-+
-+	p_memac = priv->mac;
-+
-+	if (!p_memac)
-+		return -EINVAL;
-+
-+	memac_set_loopback(p_memac->p_MemMap, en);
-+#endif
-+	return 0;
-+}
-+
-+/* TODO: re-write this function */
-+static int set_10gmac_int_loopback(
-+		struct fmt_port_s *fmt_port,
-+		bool en)
-+{
-+#ifndef FM_10G_MAC_NO_CTRL_LOOPBACK
-+#define FM_10GMAC0_OFFSET               0x000f0000
-+#define FM_10GMAC_CMD_CONF_CTRL_OFFSET  0x8
-+#define CMD_CFG_LOOPBACK_EN             0x00000400
-+
-+	uint64_t    base_addr, reg_addr;
-+	uint32_t    tmp_val;
-+
-+	base_addr = fmt_port->fm_phys_base_addr + (FM_10GMAC0_OFFSET +
-+			((fmt_port->id-FM_MAX_NUM_OF_1G_RX_PORTS)*0x2000));
-+
-+	base_addr = PTR_TO_UINT(ioremap(base_addr, 0x1000));
-+
-+	reg_addr = base_addr + FM_10GMAC_CMD_CONF_CTRL_OFFSET;
-+	tmp_val = GET_UINT32(*((uint32_t  *)UINT_TO_PTR(reg_addr)));
-+	if (en)
-+		tmp_val |= CMD_CFG_LOOPBACK_EN;
-+	else
-+		tmp_val &= ~CMD_CFG_LOOPBACK_EN;
-+	WRITE_UINT32(*((uint32_t  *)UINT_TO_PTR(reg_addr)), tmp_val);
-+
-+	iounmap(UINT_TO_PTR(base_addr));
-+
-+	return 0;
-+#else
-+	_fmt_err("TGEC don't have internal-loopback.\n");
-+	return  -EPERM;
-+#endif
-+}
-+
-+static int set_mac_int_loopback(struct fmt_port_s *fmt_port, bool en)
-+{
-+	int _err = 0;
-+
-+	switch (fmt_port->port_type) {
-+
-+	case e_IOC_FMT_PORT_T_RXTX:
-+	/* 1G port */
-+	if (fmt_port->id < FM_MAX_NUM_OF_1G_RX_PORTS)
-+		_err = set_1gmac_loopback(fmt_port, en);
-+	/* 10g port */
-+	else if ((fmt_port->id >= FM_MAX_NUM_OF_1G_RX_PORTS) &&
-+			(fmt_port->id < FM_MAX_NUM_OF_1G_RX_PORTS +
-+					FM_MAX_NUM_OF_10G_RX_PORTS)) {
-+
-+		_err = set_10gmac_int_loopback(fmt_port, en);
-+	} else
-+		_err = -EINVAL;
-+	break;
-+	/* op port does not have MAC (loopback mode) */
-+	case e_IOC_FMT_PORT_T_OP:
-+
-+	_err = 0;
-+	break;
-+	default:
-+
-+	_err = -EPERM;
-+	break;
-+	}
-+
-+	return _err;
-+}
-+
-+static void enqueue_fmt_frame(
-+		struct fmt_port_s *fmt_port,
-+		struct fmt_frame_s *p_fmt_frame)
-+{
-+	spinlock_t *rx_q_lock = NULL;
-+
-+	rx_q_lock = &fmt_port->rx_q_lock;
-+
-+	spin_lock(rx_q_lock);
-+	list_add_tail(&p_fmt_frame->list, &fmt_port->rx_q);
-+	spin_unlock(rx_q_lock);
-+
-+#if defined(FMT_K_DBG) || defined(FMT_K_DBG_RUNTIME)
-+	atomic_inc(&fmt_port->enqueue_to_rxq);
-+#endif
-+}
-+
-+static struct fmt_frame_s *dequeue_fmt_frame(
-+		struct fmt_port_s *fmt_port)
-+{
-+	struct fmt_frame_s *p_fmt_frame = NULL;
-+	spinlock_t *rx_q_lock = NULL;
-+
-+	rx_q_lock = &fmt_port->rx_q_lock;
-+
-+	spin_lock(rx_q_lock);
-+
-+#define list_last_entry(ptr, type, member) list_entry((ptr)->prev, type, member)
-+
-+	if (!list_empty(&fmt_port->rx_q)) {
-+		p_fmt_frame = list_last_entry(&fmt_port->rx_q,
-+						struct fmt_frame_s,
-+						list);
-+		list_del(&p_fmt_frame->list);
-+
-+#if defined(FMT_K_DBG) || defined(FMT_K_DBG_RUNTIME)
-+		atomic_inc(&fmt_port->dequeue_from_rxq);
-+#endif
-+	}
-+
-+	spin_unlock(rx_q_lock);
-+
-+	return p_fmt_frame;
-+}
-+
-+/* eth-dev -to- fmt port association */
-+struct fmt_port_s *match_dpa_to_fmt_port(
-+				struct dpa_priv_s *dpa_priv) {
-+	struct mac_device *mac_dev = dpa_priv->mac_dev;
-+	struct fm_port *fm_port = (struct fm_port  *) mac_dev;
-+	struct fmt_port_s *fmt_port = NULL;
-+	int i;
-+
-+	_fmt_dbgr("calling...\n");
-+
-+	/* find the FM-test-port object */
-+	for (i = 0; i < IOC_FMT_MAX_NUM_OF_PORTS; i++)
-+		if ((fm_test.ports[i].p_mac_dev &&
-+		     mac_dev == fm_test.ports[i].p_mac_dev) ||
-+		     fm_port == fm_test.ports[i].p_tx_port) {
-+
-+			fmt_port = &fm_test.ports[i];
-+			break;
-+		}
-+
-+	_fmt_dbgr("called\n");
-+	return fmt_port;
-+}
-+
-+void dump_frame(
-+	uint8_t  *buffer,
-+	uint32_t size)
-+{
-+#if defined(FMT_K_DBG) || defined(FMT_K_DBG_RUNTIME)
-+	unsigned int i;
-+
-+	for (i = 0; i < size; i++) {
-+		if (i%16 == 0)
-+			printk(KERN_DEBUG "\n");
-+		printk(KERN_DEBUG "%2x ", *(buffer+i));
-+	}
-+#endif
-+	return;
-+}
-+
-+bool test_and_steal_frame(struct fmt_port_s *fmt_port,
-+		uint32_t fqid,
-+		uint8_t  *buffer,
-+		uint32_t size)
-+{
-+	struct fmt_frame_s *p_fmt_frame = NULL;
-+	bool test_and_steal_frame_frame;
-+	uint32_t data_offset;
-+	uint32_t i;
-+
-+	_fmt_dbgr("calling...\n");
-+
-+	if (!fmt_port || !fmt_port->p_rx_fm_port_dev)
-+		return false;
-+
-+	/* check watermark */
-+	test_and_steal_frame_frame = false;
-+	for (i = 0; i < size; i++) {
-+		uint64_t temp = *((uint64_t  *)(buffer + i));
-+
-+		if (temp == (uint64_t) FMT_FRM_WATERMARK) {
-+			_fmt_dbgr("watermark found!\n");
-+			test_and_steal_frame_frame = true;
-+			break;
-+		}
-+	}
-+
-+	if (!test_and_steal_frame_frame) {
-+#if defined(FMT_K_DBG) || defined(FMT_K_DBG_RUNTIME)
-+		atomic_inc(&fmt_port->not_enqueue_to_rxq_wrong_frm);
-+#endif
-+		_fmt_dbgr("NOT watermark found!\n");
-+		return false;
-+	}
-+
-+	/* do not enqueue the tx conf/err frames */
-+	if ((fqid == FMT_TX_CONF_Q) || (fqid == FMT_TX_ERR_Q))
-+		goto _test_and_steal_frame_return_true;
-+
-+	_fmt_dbgr("on port %d got FMUC frame\n", fmt_port->id);
-+	data_offset = FM_PORT_GetBufferDataOffset(
-+					fmt_port->p_rx_fm_port_dev);
-+
-+	p_fmt_frame = kmalloc(sizeof(struct fmt_frame_s), GFP_KERNEL);
-+
-+	/* dump frame... no more space left on device */
-+	if (p_fmt_frame == NULL) {
-+		_fmt_err("no space left on device!\n");
-+		goto _test_and_steal_frame_return_true;
-+	}
-+
-+	memset(p_fmt_frame, 0, sizeof(struct fmt_frame_s));
-+	p_fmt_frame->buff.p_data = kmalloc(size * sizeof(uint8_t), GFP_KERNEL);
-+
-+	/* No more space left on device*/
-+	if (p_fmt_frame->buff.p_data == NULL) {
-+		_fmt_err("no space left on device!\n");
-+		kfree(p_fmt_frame);
-+		goto _test_and_steal_frame_return_true;
-+	}
-+
-+	p_fmt_frame->buff.size = size-data_offset;
-+	p_fmt_frame->buff.qid = fqid;
-+
-+	memcpy(p_fmt_frame->buff.p_data,
-+		(uint8_t  *)PTR_MOVE(buffer, data_offset),
-+		p_fmt_frame->buff.size);
-+
-+	memcpy(p_fmt_frame->buff.buff_context.fm_prs_res,
-+		FM_PORT_GetBufferPrsResult(fmt_port->p_rx_fm_port_dev,
-+						(char *)buffer),
-+		32);
-+
-+	/* enqueue frame - this frame will go to us */
-+	enqueue_fmt_frame(fmt_port, p_fmt_frame);
-+
-+_test_and_steal_frame_return_true:
-+	return true;
-+}
-+
-+static int fmt_fq_release(const struct qm_fd *fd)
-+{
-+	struct dpa_bp *_dpa_bp;
-+	struct bm_buffer _bmb;
-+
-+	if (fd->format == qm_fd_contig) {
-+		_dpa_bp = dpa_bpid2pool(fd->bpid);
-+		BUG_ON(IS_ERR(_dpa_bp));
-+
-+		_bmb.hi	= fd->addr_hi;
-+		_bmb.lo	= fd->addr_lo;
-+
-+		while (bman_release(_dpa_bp->pool, &_bmb, 1, 0))
-+			cpu_relax();
-+
-+	} else {
-+		_fmt_err("frame not supported !\n");
-+		return -1;
-+	}
-+
-+	return 0;
-+}
-+
-+/* sync it w/ dpaa_eth.c: DPA_BP_HEAD */
-+#define DPA_BP_HEADROOM (DPA_TX_PRIV_DATA_SIZE + \
-+			fm_get_rx_extra_headroom() + \
-+			DPA_PARSE_RESULTS_SIZE + \
-+			DPA_HASH_RESULTS_SIZE)
-+#define MAC_HEADER_LENGTH 14
-+#define L2_AND_HEADROOM_OFF ((DPA_BP_HEADROOM) + (MAC_HEADER_LENGTH))
-+
-+/* dpa ingress hooks definition */
-+enum dpaa_eth_hook_result fmt_rx_default_hook(
-+		struct sk_buff *skb,
-+		struct net_device *net_dev,
-+		u32 fqid)
-+{
-+	struct dpa_priv_s *dpa_priv = NULL;
-+	struct fmt_port_s *fmt_port = NULL;
-+	uint8_t *buffer;
-+	uint32_t buffer_len;
-+
-+	_fmt_dbgr("calling...\n");
-+
-+	dpa_priv = netdev_priv(net_dev);
-+	fmt_port = match_dpa_to_fmt_port(dpa_priv);
-+
-+	/* conversion from skb to fd:
-+	 *  skb cames processed for L3, so we need to go back for
-+	 *  layer 2 offset */
-+	buffer = (uint8_t  *)(skb->data - ((int)L2_AND_HEADROOM_OFF));
-+	buffer_len = skb->len + ((int)L2_AND_HEADROOM_OFF);
-+
-+	/* if is not out frame let dpa to handle it */
-+	if (test_and_steal_frame(fmt_port,
-+			FMT_RX_DFLT_Q,
-+			buffer,
-+			buffer_len))
-+		goto _fmt_rx_default_hook_stolen;
-+
-+	_fmt_dbgr("called:DPAA_ETH_CONTINUE.\n");
-+	return DPAA_ETH_CONTINUE;
-+
-+_fmt_rx_default_hook_stolen:
-+	dev_kfree_skb(skb);
-+
-+	_fmt_dbgr("called:DPAA_ETH_STOLEN.\n");
-+	return DPAA_ETH_STOLEN;
-+}
-+
-+enum dpaa_eth_hook_result fmt_rx_error_hook(
-+	struct net_device *net_dev,
-+	const struct qm_fd *fd,
-+	u32 fqid)
-+{
-+	struct dpa_priv_s *dpa_priv = NULL;
-+	struct dpa_bp *dpa_bp = NULL;
-+	struct fmt_port_s *fmt_port = NULL;
-+	void *fd_virt_addr = NULL;
-+	dma_addr_t addr = qm_fd_addr(fd);
-+
-+	_fmt_dbgr("calling...\n");
-+
-+	dpa_priv = netdev_priv(net_dev);
-+	fmt_port = match_dpa_to_fmt_port(dpa_priv);
-+
-+	/* dpaa doesn't do this... we have to do it here */
-+	dpa_bp = dpa_bpid2pool(fd->bpid);
-+	dma_unmap_single(dpa_bp->dev, addr, dpa_bp->size, DMA_BIDIRECTIONAL);
-+
-+	fd_virt_addr = phys_to_virt(addr);
-+	/* if is not out frame let dpa to handle it */
-+	if (test_and_steal_frame(fmt_port,
-+			FMT_RX_ERR_Q,
-+			fd_virt_addr,
-+			fd->length20 + fd->offset)) {
-+		goto _fmt_rx_error_hook_stolen;
-+	}
-+
-+	_fmt_dbgr("called:DPAA_ETH_CONTINUE.\n");
-+	return DPAA_ETH_CONTINUE;
-+
-+_fmt_rx_error_hook_stolen:
-+	/* the frame data  doesn't matter,
-+	 * so, no mapping is needed */
-+	fmt_fq_release(fd);
-+
-+	_fmt_dbgr("called:DPAA_ETH_STOLEN.\n");
-+	return DPAA_ETH_STOLEN;
-+}
-+
-+enum dpaa_eth_hook_result fmt_tx_confirm_hook(
-+	struct net_device *net_dev,
-+	const struct qm_fd *fd,
-+	u32 fqid)
-+{
-+	struct dpa_priv_s *dpa_priv = NULL;
-+	struct fmt_port_s *fmt_port = NULL;
-+	dma_addr_t addr = qm_fd_addr(fd);
-+	void *fd_virt_addr = NULL;
-+	uint32_t fd_len = 0;
-+
-+	_fmt_dbgr("calling...\n");
-+
-+	dpa_priv = netdev_priv(net_dev);
-+	fmt_port = match_dpa_to_fmt_port(dpa_priv);
-+
-+	fd_virt_addr = phys_to_virt(addr);
-+	fd_len = fd->length20 + fd->offset;
-+
-+	if (fd_len > fm_get_max_frm()) {
-+		_fmt_err("tx confirm bad frame size: %u!\n", fd_len);
-+		goto _fmt_tx_confirm_hook_continue;
-+	}
-+
-+	if (test_and_steal_frame(fmt_port,
-+			FMT_TX_CONF_Q,
-+			fd_virt_addr,
-+			fd_len))
-+		goto _fmt_tx_confirm_hook_stolen;
-+
-+_fmt_tx_confirm_hook_continue:
-+	_fmt_dbgr("called:DPAA_ETH_CONTINUE.\n");
-+	return DPAA_ETH_CONTINUE;
-+
-+_fmt_tx_confirm_hook_stolen:
-+	kfree(fd_virt_addr);
-+
-+	_fmt_dbgr("called:DPAA_ETH_STOLEN.\n");
-+	return DPAA_ETH_STOLEN;
-+}
-+
-+enum dpaa_eth_hook_result fmt_tx_confirm_error_hook(
-+	struct net_device *net_dev,
-+	const struct qm_fd *fd,
-+	u32 fqid)
-+{
-+	struct dpa_priv_s *dpa_priv = NULL;
-+	struct fmt_port_s *fmt_port = NULL;
-+	dma_addr_t addr = qm_fd_addr(fd);
-+	void *fd_virt_addr = NULL;
-+	uint32_t fd_len = 0;
-+
-+	_fmt_dbgr("calling...\n");
-+
-+	dpa_priv = netdev_priv(net_dev);
-+	fmt_port = match_dpa_to_fmt_port(dpa_priv);
-+
-+	fd_virt_addr = phys_to_virt(addr);
-+	fd_len = fd->length20 + fd->offset;
-+
-+	if (fd_len > fm_get_max_frm()) {
-+		_fmt_err("tx confirm err bad frame size: %u !\n", fd_len);
-+		goto _priv_ingress_tx_err_continue;
-+	}
-+
-+	if (test_and_steal_frame(fmt_port, FMT_TX_ERR_Q, fd_virt_addr, fd_len))
-+		goto _priv_ingress_tx_err_stolen;
-+
-+_priv_ingress_tx_err_continue:
-+	_fmt_dbgr("called:DPAA_ETH_CONTINUE.\n");
-+	return DPAA_ETH_CONTINUE;
-+
-+_priv_ingress_tx_err_stolen:
-+	kfree(fd_virt_addr);
-+
-+	_fmt_dbgr("called:DPAA_ETH_STOLEN.\n");
-+	return DPAA_ETH_STOLEN;
-+}
-+
-+/* egress callbacks definition */
-+enum qman_cb_dqrr_result fmt_egress_dqrr(
-+		struct qman_portal         *portal,
-+		struct qman_fq             *fq,
-+		const struct qm_dqrr_entry *dqrr)
-+{
-+	/* this callback should never be called */
-+	BUG();
-+	return qman_cb_dqrr_consume;
-+}
-+
-+static void  fmt_egress_error_dqrr(
-+		struct qman_portal *p,
-+		struct qman_fq *fq,
-+		const struct qm_mr_entry *msg)
-+{
-+	uint8_t *fd_virt_addr = NULL;
-+
-+	/* tx failure, on the ern callback - release buffer */
-+	fd_virt_addr = (uint8_t  *)phys_to_virt(qm_fd_addr(&msg->ern.fd));
-+	kfree(fd_virt_addr);
-+
-+	return;
-+}
-+
-+static const struct qman_fq fmt_egress_fq = {
-+	.cb = { .dqrr = fmt_egress_dqrr,
-+		.ern = fmt_egress_error_dqrr,
-+		.fqs = NULL}
-+};
-+
-+int fmt_fq_alloc(
-+	struct fmt_fqs_s *fmt_fqs,
-+	const struct qman_fq *qman_fq,
-+	uint32_t fqid,	uint32_t flags,
-+	uint16_t channel, uint8_t wq)
-+{
-+	int _errno = 0;
-+
-+	_fmt_dbg("calling...\n");
-+
-+	fmt_fqs->fq_base = *qman_fq;
-+
-+	if (fqid == 0) {
-+		flags |= QMAN_FQ_FLAG_DYNAMIC_FQID;
-+		flags &= ~QMAN_FQ_FLAG_NO_MODIFY;
-+	} else
-+		flags &= ~QMAN_FQ_FLAG_DYNAMIC_FQID;
-+
-+	fmt_fqs->init = !(flags & QMAN_FQ_FLAG_NO_MODIFY);
-+
-+	_errno = qman_create_fq(fqid, flags, &fmt_fqs->fq_base);
-+	if (_errno < 0) {
-+		_fmt_err("frame queues create failed.\n");
-+		return -EINVAL;
-+	}
-+
-+	if (fmt_fqs->init) {
-+		struct qm_mcc_initfq initfq;
-+
-+		initfq.we_mask          = QM_INITFQ_WE_DESTWQ;
-+		initfq.fqd.dest.channel = channel;
-+		initfq.fqd.dest.wq      = wq;
-+
-+		_errno = qman_init_fq(&fmt_fqs->fq_base,
-+				QMAN_INITFQ_FLAG_SCHED,
-+				&initfq);
-+		if (_errno < 0) {
-+			_fmt_err("frame queues init erorr.\n");
-+			qman_destroy_fq(&fmt_fqs->fq_base, 0);
-+			return -EINVAL;
-+		}
-+	}
-+
-+	_fmt_dbg("called.\n");
-+	return 0;
-+}
-+
-+static int fmt_fq_free(struct fmt_fqs_s *fmt_fq)
-+{
-+	int _err = 0;
-+
-+	_fmt_dbg("calling...\n");
-+
-+	if (fmt_fq->init) {
-+		_err = qman_retire_fq(&fmt_fq->fq_base, NULL);
-+		if (unlikely(_err < 0))
-+			_fmt_err("qman_retire_fq(%u) = %d\n",
-+				qman_fq_fqid(&fmt_fq->fq_base), _err);
-+
-+		_err = qman_oos_fq(&fmt_fq->fq_base);
-+		if (unlikely(_err < 0))
-+			_fmt_err("qman_oos_fq(%u) = %d\n",
-+				qman_fq_fqid(&fmt_fq->fq_base), _err);
-+	}
-+
-+	qman_destroy_fq(&fmt_fq->fq_base, 0);
-+
-+	_fmt_dbg("called.\n");
-+	return _err;
-+}
-+
-+/* private pcd dqrr calbacks */
-+static enum qman_cb_dqrr_result fmt_pcd_dqrr(
-+		struct qman_portal *portal,
-+		struct qman_fq *fq,
-+		const struct qm_dqrr_entry *dq)
-+{
-+	struct dpa_bp *dpa_bp = NULL;
-+	dma_addr_t addr = qm_fd_addr(&dq->fd);
-+	uint8_t *fd_virt_addr = NULL;
-+	struct fmt_port_s *fmt_port;
-+	struct fmt_port_pcd_s *fmt_port_pcd;
-+	uint32_t relative_fqid = 0;
-+	uint32_t fd_len = 0;
-+
-+	_fmt_dbgr("calling...\n");
-+
-+	/* upcast - from pcd_alloc_fq */
-+	fmt_port = ((struct fmt_fqs_s  *)fq)->fmt_port_priv;
-+	if (!fmt_port) {
-+		_fmt_err(" wrong fmt port -to- fq match.\n");
-+		goto _fmt_pcd_dqrr_return;
-+	}
-+	fmt_port_pcd = &fmt_port->fmt_port_pcd;
-+
-+	relative_fqid = dq->fqid - fmt_port_pcd->fqid_base;
-+	_fmt_dbgr("pcd dqrr got frame on relative fq:%u@base:%u\n",
-+				relative_fqid, fmt_port_pcd->fqid_base);
-+
-+	fd_len = dq->fd.length20 + dq->fd.offset;
-+
-+	if (fd_len > fm_get_max_frm()) {
-+		_fmt_err("pcd dqrr wrong frame size: %u (%u:%u)!\n",
-+			fd_len, dq->fd.length20, dq->fd.offset);
-+		goto _fmt_pcd_dqrr_return;
-+	}
-+
-+	dpa_bp = dpa_bpid2pool(dq->fd.bpid);
-+	dma_unmap_single(dpa_bp->dev, addr, dpa_bp->size, DMA_BIDIRECTIONAL);
-+
-+	fd_virt_addr = phys_to_virt(addr);
-+	if (!test_and_steal_frame(fmt_port, relative_fqid, fd_virt_addr,
-+								   fd_len)) {
-+
-+#if defined(FMT_K_DBG) || defined(FMT_K_DBG_RUNTIME)
-+		atomic_inc(&fmt_port->not_enqueue_to_rxq_wrong_frm);
-+#endif
-+		_fmt_wrn("pcd dqrr unrecognized frame@fqid: %u,"
-+			 " frame len: %u (dropped).\n",
-+			dq->fqid, dq->fd.length20);
-+		dump_frame(fd_virt_addr, fd_len);
-+	}
-+
-+_fmt_pcd_dqrr_return:
-+	/* no need to map again here */
-+	fmt_fq_release(&dq->fd);
-+
-+	_fmt_dbgr("calle.\n");
-+	return qman_cb_dqrr_consume;
-+}
-+
-+static void fmt_pcd_err_dqrr(
-+	struct qman_portal *qm,
-+	struct qman_fq *fq,
-+	const struct qm_mr_entry *msg)
-+{
-+	_fmt_err("this callback should never be called.\n");
-+	BUG();
-+	return;
-+}
-+
-+static void fmt_pcd_fqs_dqrr(
-+	struct qman_portal *qm,
-+	struct qman_fq *fq,
-+	const struct qm_mr_entry *msg)
-+{
-+	_fmt_dbg(" fq state(0x%x)@fqid(%u.\n", msg->fq.fqs, msg->fq.fqid);
-+	return;
-+}
-+
-+/* private pcd queue template */
-+static const struct qman_fq pcd_fq = {
-+	.cb = { .dqrr = fmt_pcd_dqrr,
-+		.ern = fmt_pcd_err_dqrr,
-+		.fqs = fmt_pcd_fqs_dqrr}
-+};
-+
-+/* defined as weak in dpaa driver. */
-+/* ! parameters come from IOCTL call - US */
-+int dpa_alloc_pcd_fqids(
-+		struct device *dev,
-+		uint32_t num, uint8_t alignment,
-+		uint32_t *base_fqid)
-+{
-+	int _err = 0, i;
-+	struct net_device *net_dev = NULL;
-+	struct dpa_priv_s *dpa_priv = NULL;
-+	struct fmt_port_pcd_s *fmt_port_pcd = NULL;
-+	struct fmt_fqs_s *fmt_fqs = NULL;
-+	struct fmt_port_s *fmt_port = NULL;
-+	int num_allocated = 0;
-+
-+	_fmt_dbg("calling...\n");
-+
-+	net_dev = (typeof(net_dev))dev_get_drvdata(dev);
-+	dpa_priv = (typeof(dpa_priv))netdev_priv(net_dev);
-+
-+	if (!netif_msg_probe(dpa_priv)) {
-+		_fmt_err("dpa not probe.\n");
-+		_err = -ENODEV;
-+		goto _pcd_alloc_fqs_err;
-+	}
-+
-+	fmt_port = match_dpa_to_fmt_port(dpa_priv);
-+	if (!fmt_port) {
-+		_fmt_err("fmt port not found.");
-+		_err = -EINVAL;
-+		goto _pcd_alloc_fqs_err;
-+	}
-+
-+	fmt_port_pcd = &fmt_port->fmt_port_pcd;
-+
-+	num_allocated = qman_alloc_fqid_range(base_fqid, num, alignment, 0);
-+
-+	if ((num_allocated <= 0) ||
-+	    (num_allocated < num) ||
-+	    (alignment && (*base_fqid) % alignment)) {
-+		*base_fqid = 0;
-+		_fmt_err("Failed to alloc pcd fqs rang.\n");
-+		_err = -EINVAL;
-+		goto _pcd_alloc_fqs_err;
-+	}
-+
-+	_fmt_dbg("wanted %d fqs(align %d), got %d fqids@%u.\n",
-+				num, alignment, num_allocated, *base_fqid);
-+
-+	/* alloc pcd queues */
-+	fmt_port_pcd->fmt_pcd_fqs = kmalloc(num_allocated *
-+						sizeof(struct fmt_fqs_s),
-+						GFP_KERNEL);
-+	fmt_port_pcd->num_queues = num_allocated;
-+	fmt_port_pcd->fqid_base = *base_fqid;
-+	fmt_fqs = fmt_port_pcd->fmt_pcd_fqs;
-+
-+	/* alloc the pcd queues */
-+	for (i = 0; i < num_allocated; i++, fmt_fqs++) {
-+		_err = fmt_fq_alloc(
-+			fmt_fqs,
-+			&pcd_fq,
-+			(*base_fqid) + i, QMAN_FQ_FLAG_NO_ENQUEUE,
-+			dpa_priv->channel, 7);
-+
-+		if (_err < 0)
-+			goto _pcd_alloc_fqs_err;
-+
-+		/* upcast to identify from where the frames came from */
-+		fmt_fqs->fmt_port_priv = fmt_port;
-+	}
-+
-+	_fmt_dbg("called.\n");
-+	return _err;
-+_pcd_alloc_fqs_err:
-+	if (num_allocated > 0)
-+		qman_release_fqid_range(*base_fqid, num_allocated);
-+	/*TODO: free fmt_pcd_fqs if are any */
-+
-+	_fmt_dbg("called(_err:%d).\n", _err);
-+	return _err;
-+}
-+
-+/* defined as weak in dpaa driver. */
-+int dpa_free_pcd_fqids(
-+	struct device *dev,
-+	uint32_t base_fqid)
-+{
-+
-+	int _err = 0, i;
-+	struct net_device *net_dev = NULL;
-+	struct dpa_priv_s *dpa_priv = NULL;
-+	struct fmt_port_pcd_s *fmt_port_pcd = NULL;
-+	struct fmt_fqs_s *fmt_fqs = NULL;
-+	struct fmt_port_s *fmt_port = NULL;
-+	int num_allocated = 0;
-+
-+	_fmt_dbg("calling...\n");
-+
-+	net_dev = (typeof(net_dev))dev_get_drvdata(dev);
-+	dpa_priv = (typeof(dpa_priv))netdev_priv(net_dev);
-+
-+	if (!netif_msg_probe(dpa_priv)) {
-+		_fmt_err("dpa not probe.\n");
-+		_err = -ENODEV;
-+		goto _pcd_free_fqs_err;
-+	}
-+
-+	fmt_port = match_dpa_to_fmt_port(dpa_priv);
-+	if (!fmt_port) {
-+		_fmt_err("fmt port not found.");
-+		_err = -EINVAL;
-+		goto _pcd_free_fqs_err;
-+	}
-+
-+	fmt_port_pcd = &fmt_port->fmt_port_pcd;
-+	num_allocated = fmt_port_pcd->num_queues;
-+	fmt_fqs = fmt_port_pcd->fmt_pcd_fqs;
-+
-+	for (i = 0; i < num_allocated; i++, fmt_fqs++)
-+		fmt_fq_free(fmt_fqs);
-+
-+	qman_release_fqid_range(base_fqid,num_allocated);
-+
-+	kfree(fmt_port_pcd->fmt_pcd_fqs);
-+	memset(fmt_port_pcd, 0, sizeof(*fmt_port_pcd));
-+
-+	/* debugging stuff */
-+#if defined(FMT_K_DBG) || defined(FMT_K_DBG_RUNTIME)
-+	_fmt_dbg(" portid: %u.\n", fmt_port->id);
-+	_fmt_dbg(" frames enqueue to qman: %u.\n",
-+			atomic_read(&fmt_port->enqueue_to_qman_frm));
-+	_fmt_dbg(" frames enqueue to rxq: %u.\n",
-+			atomic_read(&fmt_port->enqueue_to_rxq));
-+	_fmt_dbg(" frames dequeue from rxq: %u.\n",
-+			atomic_read(&fmt_port->dequeue_from_rxq));
-+	_fmt_dbg(" frames not enqueue to rxq - wrong frm: %u.\n",
-+			atomic_read(&fmt_port->not_enqueue_to_rxq_wrong_frm));
-+	atomic_set(&fmt_port->enqueue_to_qman_frm, 0);
-+	atomic_set(&fmt_port->enqueue_to_rxq, 0);
-+	atomic_set(&fmt_port->dequeue_from_rxq, 0);
-+	atomic_set(&fmt_port->not_enqueue_to_rxq_wrong_frm, 0);
-+#endif
-+	return 0;
-+
-+_pcd_free_fqs_err:
-+	return _err;
-+}
-+
-+static int fmt_port_init(
-+	struct fmt_port_s *fmt_port,
-+	ioc_fmt_port_param_t *p_Params)
-+{
-+	struct device_node  *fm_node, *fm_port_node;
-+	const uint32_t      *uint32_prop;
-+	int                 _errno = 0, lenp = 0, i;
-+	static struct of_device_id fm_node_of_match[] = {
-+		{ .compatible = "fsl,fman", },
-+		{ /* end of list */ },
-+		};
-+
-+	_fmt_dbg("calling...\n");
-+
-+	/* init send/receive tu US list */
-+	INIT_LIST_HEAD(&fmt_port->rx_q);
-+
-+	/* check parameters */
-+	if (p_Params->num_tx_queues > FMAN_TEST_MAX_TX_FQS ||
-+		p_Params->fm_port_id > IOC_FMT_MAX_NUM_OF_PORTS) {
-+		_fmt_dbg("wrong test parameters.\n");
-+		return -EINVAL;
-+	}
-+
-+	/* set port parameters */
-+	fmt_port->num_of_tx_fqs = p_Params->num_tx_queues;
-+	fmt_port->id = p_Params->fm_port_id;
-+	fmt_port->port_type = p_Params->fm_port_type;
-+	fmt_port->diag = e_IOC_DIAG_MODE_NONE;
-+
-+	/* init debugging stuff */
-+#if defined(FMT_K_DBG) || defined(FMT_K_DBG_RUNTIME)
-+	atomic_set(&fmt_port->enqueue_to_qman_frm, 0);
-+	atomic_set(&fmt_port->enqueue_to_rxq, 0);
-+	atomic_set(&fmt_port->dequeue_from_rxq, 0);
-+	atomic_set(&fmt_port->not_enqueue_to_rxq_wrong_frm, 0);
-+#endif
-+
-+	/* TODO: This should be done at probe time not at runtime
-+	 *	very ugly function */
-+	/* fill fmt port properties from dts */
-+	for_each_matching_node(fm_node, fm_node_of_match) {
-+
-+	uint32_prop = (uint32_t *)of_get_property(fm_node,
-+						"cell-index", &lenp);
-+	if (unlikely(uint32_prop == NULL)) {
-+		_fmt_wrn("of_get_property(%s, cell-index) invalid",
-+						fm_node->full_name);
-+		return -EINVAL;
-+	}
-+	if (WARN_ON(lenp != sizeof(uint32_t))) {
-+		_fmt_wrn("of_get_property(%s, cell-index) invalid",
-+						fm_node->full_name);
-+		return -EINVAL;
-+	}
-+
-+	if (*uint32_prop == p_Params->fm_id) {
-+		struct resource res;
-+
-+		/* Get the FM address */
-+		_errno = of_address_to_resource(fm_node, 0, &res);
-+		if (unlikely(_errno < 0)) {
-+			_fmt_wrn("of_address_to_resource() = %u.\n", _errno);
-+			return -EINVAL;
-+		}
-+
-+		fmt_port->fm_phys_base_addr = res.start;
-+
-+		for_each_child_of_node(fm_node, fm_port_node) {
-+		struct platform_device    *of_dev;
-+
-+		if (!of_device_is_available(fm_port_node))
-+			continue;
-+
-+		uint32_prop = (uint32_t *)of_get_property(
-+						fm_port_node,
-+						"cell-index",
-+						&lenp);
-+		if (uint32_prop == NULL)
-+			continue;
-+
-+		if (of_device_is_compatible(fm_port_node,
-+						"fsl,fman-port-oh") &&
-+			(fmt_port->port_type  == e_IOC_FMT_PORT_T_OP)) {
-+
-+			if (*uint32_prop == fmt_port->id) {
-+				of_dev = of_find_device_by_node(fm_port_node);
-+				if (unlikely(of_dev == NULL)) {
-+					_fmt_wrn("fm id invalid\n");
-+					return -EINVAL;
-+				}
-+
-+				fmt_port->p_tx_port =
-+						fm_port_bind(&of_dev->dev);
-+				fmt_port->p_tx_fm_port_dev =
-+						(void  *)fm_port_get_handle(
-+							fmt_port->p_tx_port);
-+				fmt_port->p_rx_port =
-+						fmt_port->p_tx_port;
-+				fmt_port->p_rx_fm_port_dev =
-+						fmt_port->p_tx_fm_port_dev;
-+				fmt_port->p_mac_dev = NULL;
-+			break;
-+			}
-+		} else if ((*uint32_prop == fmt_port->id) &&
-+			fmt_port->port_type == e_IOC_FMT_PORT_T_RXTX) {
-+
-+			of_dev = of_find_device_by_node(fm_port_node);
-+			if (unlikely(of_dev == NULL)) {
-+				_fmt_wrn("dtb fm id invalid value");
-+				return -EINVAL;
-+			}
-+
-+			if (of_device_is_compatible(fm_port_node,
-+					   "fsl,fman-port-1g-tx")) {
-+				fmt_port->p_tx_port =
-+						fm_port_bind(&of_dev->dev);
-+				fmt_port->p_tx_fm_port_dev = (void  *)
-+						fm_port_get_handle(
-+							fmt_port->p_tx_port);
-+			} else if (of_device_is_compatible(fm_port_node,
-+						      "fsl,fman-port-1g-rx")) {
-+				fmt_port->p_rx_port =
-+						fm_port_bind(&of_dev->dev);
-+				fmt_port->p_rx_fm_port_dev = (void  *)
-+						fm_port_get_handle(
-+							fmt_port->p_rx_port);
-+			} else if (of_device_is_compatible(fm_port_node,
-+							"fsl,fman-1g-mac") ||
-+				   of_device_is_compatible(fm_port_node,
-+							"fsl,fman-memac"))
-+				fmt_port->p_mac_dev =
-+						(typeof(fmt_port->p_mac_dev))
-+						dev_get_drvdata(&of_dev->dev);
-+			else
-+				continue;
-+
-+			if (fmt_port->p_tx_fm_port_dev &&
-+			fmt_port->p_rx_fm_port_dev && fmt_port->p_mac_dev)
-+				break;
-+		} else if (((*uint32_prop + FM_MAX_NUM_OF_1G_RX_PORTS) ==
-+				fmt_port->id) &&
-+				fmt_port->port_type == e_IOC_FMT_PORT_T_RXTX) {
-+
-+			of_dev = of_find_device_by_node(fm_port_node);
-+			if (unlikely(of_dev == NULL)) {
-+				_fmt_wrn("dtb fm id invalid value\n");
-+				return -EINVAL;
-+			}
-+
-+			if (of_device_is_compatible(fm_port_node,
-+					     "fsl,fman-port-10g-tx")) {
-+				fmt_port->p_tx_port =
-+						fm_port_bind(&of_dev->dev);
-+				fmt_port->p_tx_fm_port_dev = (void *)
-+						fm_port_get_handle(
-+							fmt_port->p_tx_port);
-+			} else if (of_device_is_compatible(fm_port_node,
-+						     "fsl,fman-port-10g-rx")) {
-+				fmt_port->p_rx_port =
-+						fm_port_bind(&of_dev->dev);
-+				fmt_port->p_rx_fm_port_dev = (void *)
-+						fm_port_get_handle(
-+							fmt_port->p_rx_port);
-+			} else if (of_device_is_compatible(fm_port_node,
-+							"fsl,fman-10g-mac") ||
-+				   of_device_is_compatible(fm_port_node,
-+							"fsl,fman-memac"))
-+				fmt_port->p_mac_dev =
-+						(typeof(fmt_port->p_mac_dev))
-+						dev_get_drvdata(&of_dev->dev);
-+			else
-+				continue;
-+
-+			if (fmt_port->p_tx_fm_port_dev &&
-+			fmt_port->p_rx_fm_port_dev && fmt_port->p_mac_dev)
-+				break;
-+			}
-+		} /* for_each_child */
-+	}
-+	} /* for each matching node */
-+
-+	if (fmt_port->p_tx_fm_port_dev == 0 ||
-+		fmt_port->p_rx_fm_port_dev == 0) {
-+
-+		_fmt_err("bad fm port pointers.\n");
-+		return -EINVAL;
-+	}
-+
-+	_fmt_dbg("alloc %u tx queues.\n", fmt_port->num_of_tx_fqs);
-+
-+	/* init fman test egress dynamic frame queues */
-+	for (i = 0; i < fmt_port->num_of_tx_fqs; i++) {
-+		int _errno;
-+		_errno = fmt_fq_alloc(
-+				&fmt_port->p_tx_fqs[i],
-+				&fmt_egress_fq,
-+				0,
-+				QMAN_FQ_FLAG_TO_DCPORTAL,
-+				fm_get_tx_port_channel(fmt_port->p_tx_port),
-+				i);
-+
-+		if (_errno < 0) {
-+			_fmt_err("tx queues allocation failed.\n");
-+			/* TODO: memory leak here if 1 queue is allocated and
-+			* next queues are failing ... */
-+			return -EINVAL;
-+		}
-+	}
-+
-+	/* port is valid and ready to use. */
-+	fmt_port->valid  = TRUE;
-+
-+	_fmt_dbg("called.\n");
-+	return 0;
-+}
-+
-+/* fm test chardev functions */
-+static int fmt_open(struct inode *inode, struct file *file)
-+{
-+	unsigned int minor = iminor(inode);
-+
-+	_fmt_dbg("calling...\n");
-+
-+	if (file->private_data != NULL)
-+		return 0;
-+
-+	/* The minor represent the port number.
-+	 * Set the port structure accordingly, thus all the operations
-+	 * will be done on this port. */
-+	if ((minor >= DEV_FM_TEST_PORTS_MINOR_BASE) &&
-+	    (minor < DEV_FM_TEST_MAX_MINORS))
-+		file->private_data = &fm_test.ports[minor];
-+	else
-+		return -ENXIO;
-+
-+	_fmt_dbg("called.\n");
-+	return 0;
-+}
-+
-+static int fmt_close(struct inode *inode, struct file *file)
-+{
-+	struct fmt_port_s *fmt_port = NULL;
-+	struct fmt_frame_s *fmt_frame = NULL;
-+
-+	int err = 0;
-+
-+	_fmt_dbg("calling...\n");
-+
-+	fmt_port = file->private_data;
-+	if (!fmt_port)
-+		return -ENODEV;
-+
-+	/* Close the current test port by invalidating it. */
-+	fmt_port->valid = FALSE;
-+
-+	/* clean the fmt port queue */
-+	while ((fmt_frame = dequeue_fmt_frame(fmt_port)) != NULL) {
-+		if (fmt_frame && fmt_frame->buff.p_data){
-+		kfree(fmt_frame->buff.p_data);
-+		kfree(fmt_frame);
-+	}
-+	}
-+
-+	/* !!! the qman queues are cleaning from fm_ioctl...
-+	 * - very ugly */
-+
-+	_fmt_dbg("called.\n");
-+	return err;
-+}
-+
-+static int fmt_ioctls(unsigned int minor,
-+			struct file *file,
-+			unsigned int cmd,
-+			unsigned long arg,
-+			bool compat)
-+{
-+	struct fmt_port_s *fmt_port = NULL;
-+
-+	_fmt_dbg("IOCTL minor:%u "
-+		  " arg:0x%08lx ioctl cmd (0x%08x):(0x%02x:0x%02x.\n",
-+		   minor, arg, cmd, _IOC_TYPE(cmd), _IOC_NR(cmd));
-+
-+	fmt_port = file->private_data;
-+	if (!fmt_port) {
-+		_fmt_err("invalid fmt port.\n");
-+		return -ENODEV;
-+	}
-+
-+	/* set test type properly */
-+	if (compat)
-+		fmt_port->compat_test_type = true;
-+	else
-+		fmt_port->compat_test_type = false;
-+
-+	switch (cmd) {
-+	case FMT_PORT_IOC_INIT:
-+	{
-+		ioc_fmt_port_param_t param;
-+
-+		if (fmt_port->valid) {
-+			_fmt_wrn("port is already initialized.\n");
-+			return -EFAULT;
-+		}
-+#if defined(CONFIG_COMPAT)
-+		if (compat) {
-+			if (copy_from_user(&param,
-+				(ioc_fmt_port_param_t  *)compat_ptr(arg),
-+				sizeof(ioc_fmt_port_param_t)))
-+
-+				return -EFAULT;
-+		} else
-+#endif
-+		{
-+			if (copy_from_user(&param,
-+				(ioc_fmt_port_param_t  *) arg,
-+				sizeof(ioc_fmt_port_param_t)))
-+
-+				return -EFAULT;
-+		}
-+
-+		return fmt_port_init(fmt_port, &param);
-+	}
-+
-+	case FMT_PORT_IOC_SET_DIAG_MODE:
-+		if (get_user(fmt_port->diag, (ioc_diag_mode  *)arg))
-+			return -EFAULT;
-+
-+		if (fmt_port->diag == e_IOC_DIAG_MODE_CTRL_LOOPBACK)
-+			return set_mac_int_loopback(fmt_port, TRUE);
-+		else
-+			return set_mac_int_loopback(fmt_port, FALSE);
-+	break;
-+
-+	case FMT_PORT_IOC_SET_DPAECHO_MODE:
-+	case FMT_PORT_IOC_SET_IP_HEADER_MANIP:
-+	default:
-+		_fmt_wrn("ioctl unimplemented minor:%u@ioctl"
-+			  " cmd:0x%08x(type:0x%02x, nr:0x%02x.\n",
-+			  minor, cmd, _IOC_TYPE(cmd), _IOC_NR(cmd));
-+	return -EFAULT;
-+	}
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_COMPAT
-+static long fmt_compat_ioctl(
-+		struct file *file,
-+		unsigned int cmd,
-+		unsigned long arg)
-+{
-+	unsigned int minor = iminor(file->f_path.dentry->d_inode);
-+
-+	_fmt_dbg("calling...\n");
-+	return fmt_ioctls(minor, file, cmd, arg, true);
-+}
-+#endif
-+
-+static long fmt_ioctl(
-+		struct file *file,
-+		unsigned int cmd,
-+		unsigned long arg)
-+{
-+	unsigned int minor = iminor(file->f_path.dentry->d_inode);
-+	unsigned int res;
-+
-+	_fmt_dbg("calling...\n");
-+
-+	fm_mutex_lock();
-+	res = fmt_ioctls(minor, file, cmd, arg, false);
-+	fm_mutex_unlock();
-+
-+	_fmt_dbg("called.\n");
-+
-+	return res;
-+}
-+
-+#ifdef CONFIG_COMPAT
-+void copy_compat_test_frame_buffer(
-+		ioc_fmt_buff_desc_t *buff,
-+		ioc_fmt_compat_buff_desc_t *compat_buff)
-+{
-+	compat_buff->qid = buff->qid;
-+	compat_buff->p_data = ptr_to_compat(buff->p_data);
-+	compat_buff->size = buff->size;
-+	compat_buff->status = buff->status;
-+
-+	compat_buff->buff_context.p_user_priv =
-+			ptr_to_compat(buff->buff_context.p_user_priv);
-+	memcpy(compat_buff->buff_context.fm_prs_res,
-+			buff->buff_context.fm_prs_res,
-+			FM_PRS_MAX * sizeof(uint8_t));
-+	memcpy(compat_buff->buff_context.fm_time_stamp,
-+			buff->buff_context.fm_time_stamp,
-+			FM_TIME_STAMP_MAX * sizeof(uint8_t));
-+}
-+#endif
-+
-+ssize_t fmt_read(
-+		struct file *file,
-+		char __user *buf,
-+		size_t size,
-+		loff_t *ppos)
-+{
-+	struct fmt_port_s *fmt_port = NULL;
-+	struct fmt_frame_s *p_fmt_frame = NULL;
-+	ssize_t cnt = 0;
-+
-+	fmt_port = file->private_data;
-+	if (!fmt_port || !fmt_port->valid) {
-+		_fmt_err("fmt port not valid!\n");
-+		return -ENODEV;
-+	}
-+
-+	p_fmt_frame = dequeue_fmt_frame(fmt_port);
-+	if (p_fmt_frame == NULL)
-+		return 0;
-+
-+	_fmt_dbgr("calling...\n");
-+
-+#ifdef CONFIG_COMPAT
-+	if (fmt_port->compat_test_type){
-+		cnt = sizeof(ioc_fmt_compat_buff_desc_t);
-+	}
-+	else
-+#endif
-+	{
-+		cnt = sizeof(ioc_fmt_buff_desc_t);
-+	}
-+
-+	if (size < cnt) {
-+		_fmt_err("illegal buffer-size!\n");
-+		cnt = 0;
-+		goto _fmt_read_return;
-+	}
-+
-+        /* Copy structure */
-+#ifdef CONFIG_COMPAT
-+	if (fmt_port->compat_test_type) {
-+		{
-+			ioc_fmt_compat_buff_desc_t compat_buff;
-+			copy_compat_test_frame_buffer(&p_fmt_frame->buff,
-+								&compat_buff);
-+
-+			if (copy_to_user(buf, &compat_buff, cnt)) {
-+				_fmt_err("copy_to_user failed!\n");
-+				goto _fmt_read_return;
-+			}
-+		}
-+
-+		((ioc_fmt_compat_buff_desc_t  *)buf)->p_data =
-+			ptr_to_compat(buf+sizeof(ioc_fmt_compat_buff_desc_t));
-+		cnt += MIN(p_fmt_frame->buff.size, size-cnt);
-+	} else
-+#endif
-+	{
-+		if (copy_to_user(buf, &p_fmt_frame->buff, cnt)) {
-+			_fmt_err("copy_to_user failed!\n");
-+			goto _fmt_read_return;
-+		}
-+
-+		((ioc_fmt_buff_desc_t  *)buf)->p_data =
-+				buf + sizeof(ioc_fmt_buff_desc_t);
-+		cnt += MIN(p_fmt_frame->buff.size, size-cnt);
-+	}
-+
-+	if (size < cnt) {
-+		_fmt_err("illegal buffer-size!\n");
-+		goto _fmt_read_return;
-+	}
-+
-+	/* copy frame */
-+#ifdef CONFIG_COMPAT
-+	if (fmt_port->compat_test_type) {
-+		if (copy_to_user(buf+sizeof(ioc_fmt_compat_buff_desc_t),
-+					p_fmt_frame->buff.p_data, cnt)) {
-+			_fmt_err("copy_to_user failed!\n");
-+			goto _fmt_read_return;
-+		}
-+	} else
-+#endif
-+	{
-+		if (copy_to_user(buf+sizeof(ioc_fmt_buff_desc_t),
-+					p_fmt_frame->buff.p_data, cnt)) {
-+			_fmt_err("copy_to_user failed!\n");
-+			goto _fmt_read_return;
-+		}
-+	}
-+
-+_fmt_read_return:
-+	kfree(p_fmt_frame->buff.p_data);
-+	kfree(p_fmt_frame);
-+
-+	_fmt_dbgr("called.\n");
-+	return cnt;
-+}
-+
-+ssize_t fmt_write(
-+		struct file *file,
-+		const char __user *buf,
-+		size_t size,
-+		loff_t *ppos)
-+{
-+	struct fmt_port_s *fmt_port = NULL;
-+	ioc_fmt_buff_desc_t buff_desc;
-+#ifdef CONFIG_COMPAT
-+	ioc_fmt_compat_buff_desc_t buff_desc_compat;
-+#endif
-+	uint8_t *p_data = NULL;
-+	uint32_t data_offset;
-+	int _errno;
-+	t_DpaaFD fd;
-+
-+	_fmt_dbgr("calling...\n");
-+
-+	fmt_port = file->private_data;
-+	if (!fmt_port || !fmt_port->valid) {
-+		_fmt_err("fmt port not valid.\n");
-+		return -EINVAL;
-+	}
-+
-+    /* If Compat (32B UserSpace - 64B KernelSpace)  */
-+#ifdef CONFIG_COMPAT
-+	if (fmt_port->compat_test_type) {
-+		if (size < sizeof(ioc_fmt_compat_buff_desc_t)) {
-+			_fmt_err("invalid buff_desc size.\n");
-+			return -EFAULT;
-+		}
-+
-+		if (copy_from_user(&buff_desc_compat, buf,
-+					sizeof(ioc_fmt_compat_buff_desc_t)))
-+			return -EFAULT;
-+
-+		buff_desc.qid = buff_desc_compat.qid;
-+		buff_desc.p_data = compat_ptr(buff_desc_compat.p_data);
-+		buff_desc.size = buff_desc_compat.size;
-+		buff_desc.status = buff_desc_compat.status;
-+
-+		buff_desc.buff_context.p_user_priv =
-+			compat_ptr(buff_desc_compat.buff_context.p_user_priv);
-+		memcpy(buff_desc.buff_context.fm_prs_res,
-+				buff_desc_compat.buff_context.fm_prs_res,
-+				FM_PRS_MAX * sizeof(uint8_t));
-+		memcpy(buff_desc.buff_context.fm_time_stamp,
-+				buff_desc_compat.buff_context.fm_time_stamp,
-+				FM_TIME_STAMP_MAX * sizeof(uint8_t));
-+	} else
-+#endif
-+	{
-+		if (size < sizeof(ioc_fmt_buff_desc_t)) {
-+			_fmt_err("invalid buff_desc size.\n");
-+			return -EFAULT;
-+		}
-+
-+		if (copy_from_user(&buff_desc, (ioc_fmt_buff_desc_t  *)buf,
-+					sizeof(ioc_fmt_buff_desc_t)))
-+			return -EFAULT;
-+	}
-+
-+	data_offset = FM_PORT_GetBufferDataOffset(fmt_port->p_tx_fm_port_dev);
-+	p_data = kmalloc(buff_desc.size+data_offset, GFP_KERNEL);
-+	if (!p_data)
-+		return -ENOMEM;
-+
-+	/* If Compat (32UserSpace - 64KernelSpace) the buff_desc.p_data is ok */
-+	if (copy_from_user((uint8_t *)PTR_MOVE(p_data, data_offset),
-+				buff_desc.p_data,
-+				buff_desc.size)) {
-+		kfree(p_data);
-+		return -EFAULT;
-+	}
-+
-+	/* TODO: dma_map_single here (cannot access the bpool struct) */
-+
-+	/* prepare fd */
-+	memset(&fd, 0, sizeof(fd));
-+	DPAA_FD_SET_ADDR(&fd, p_data);
-+	DPAA_FD_SET_OFFSET(&fd, data_offset);
-+	DPAA_FD_SET_LENGTH(&fd, buff_desc.size);
-+
-+	_errno = qman_enqueue(&fmt_port->p_tx_fqs[buff_desc.qid].fq_base,
-+							(struct qm_fd *)&fd, 0);
-+	if (_errno) {
-+		buff_desc.status = (uint32_t)_errno;
-+		if (copy_to_user((ioc_fmt_buff_desc_t *)buf, &buff_desc,
-+						sizeof(ioc_fmt_buff_desc_t))) {
-+			kfree(p_data);
-+			return -EFAULT;
-+		}
-+	}
-+
-+	/* for debugging */
-+#if defined(FMT_K_DBG) || defined(FMT_K_DBG_RUNTIME)
-+	atomic_inc(&fmt_port->enqueue_to_qman_frm);
-+#endif
-+	_fmt_dbgr("called.\n");
-+	return buff_desc.size;
-+}
-+
-+/* fm test character device definition */
-+static const struct file_operations fmt_fops =
-+{
-+	.owner			= THIS_MODULE,
-+#ifdef CONFIG_COMPAT
-+	.compat_ioctl		= fmt_compat_ioctl,
-+#endif
-+	.unlocked_ioctl		= fmt_ioctl,
-+	.open			= fmt_open,
-+	.release		= fmt_close,
-+	.read			= fmt_read,
-+	.write			= fmt_write,
-+};
-+
-+static int fmt_init(void)
-+{
-+	int id;
-+
-+	_fmt_dbg("calling...\n");
-+
-+	/* Register to the /dev for IOCTL API */
-+	/* Register dynamically a new major number for the character device: */
-+	fm_test.major = register_chrdev(0, DEV_FM_TEST_NAME, &fmt_fops);
-+	if (fm_test.major  <= 0) {
-+		_fmt_wrn("Failed to allocate major number for device %s.\n",
-+							DEV_FM_TEST_NAME);
-+		return -ENODEV;
-+	}
-+
-+	/* Creating class for FMan_test */
-+	fm_test.fmt_class = class_create(THIS_MODULE, DEV_FM_TEST_NAME);
-+	if (IS_ERR(fm_test.fmt_class)) {
-+		unregister_chrdev(fm_test.major, DEV_FM_TEST_NAME);
-+		_fmt_wrn("Error creating %s class.\n", DEV_FM_TEST_NAME);
-+		return -ENODEV;
-+	}
-+
-+	for (id = 0; id < IOC_FMT_MAX_NUM_OF_PORTS; id++)
-+		if (NULL == device_create(fm_test.fmt_class, NULL,
-+				MKDEV(fm_test.major,
-+				DEV_FM_TEST_PORTS_MINOR_BASE + id), NULL,
-+				DEV_FM_TEST_NAME "%d", id)) {
-+
-+			_fmt_err("Error creating %s device.\n",
-+							DEV_FM_TEST_NAME);
-+			return -ENODEV;
-+		}
-+
-+	return 0;
-+}
-+
-+static void  fmt_free(void)
-+{
-+	int id;
-+
-+	for (id = 0; id < IOC_FMT_MAX_NUM_OF_PORTS; id++)
-+		device_destroy(fm_test.fmt_class, MKDEV(fm_test.major,
-+			DEV_FM_TEST_PORTS_MINOR_BASE + id));
-+	class_destroy(fm_test.fmt_class);
-+}
-+
-+static int __init __cold fmt_load(void)
-+{
-+	struct dpaa_eth_hooks_s priv_dpaa_eth_hooks;
-+
-+	/* set dpaa hooks for default queues */
-+	memset(&priv_dpaa_eth_hooks, 0, sizeof(priv_dpaa_eth_hooks));
-+	priv_dpaa_eth_hooks.rx_default = fmt_rx_default_hook;
-+	priv_dpaa_eth_hooks.rx_error = fmt_rx_error_hook;
-+	priv_dpaa_eth_hooks.tx_confirm = fmt_tx_confirm_hook;
-+	priv_dpaa_eth_hooks.tx_error = fmt_tx_confirm_error_hook;
-+
-+	fsl_dpaa_eth_set_hooks(&priv_dpaa_eth_hooks);
-+
-+	/* initialize the fman test environment */
-+	if (fmt_init() < 0) {
-+		_fmt_err("Failed to init FM-test modul.\n");
-+		fmt_free();
-+		return -ENODEV;
-+	}
-+
-+	_fmt_inf("FSL FM test module loaded.\n");
-+
-+	return 0;
-+}
-+
-+static void __exit __cold fmt_unload(void)
-+{
-+	fmt_free();
-+	_fmt_inf("FSL FM test module unloaded.\n");
-+}
-+
-+module_init(fmt_load);
-+module_exit(fmt_unload);
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-@@ -0,0 +1,2908 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/*
-+ @File          lnxwrp_fm.c
-+ @Author        Shlomi Gridish
-+ @Description   FM Linux wrapper functions.
-+*/
-+
-+#include <linux/version.h>
-+#include <linux/slab.h>
-+#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
-+#define MODVERSIONS
-+#endif
-+#ifdef MODVERSIONS
-+#include <config/modversions.h>
-+#endif /* MODVERSIONS */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/fs.h>
-+#include <linux/cdev.h>
-+#include <linux/device.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_address.h>
-+#include <linux/of_irq.h>
-+#include <linux/clk.h>
-+#include <asm/uaccess.h>
-+#include <asm/errno.h>
-+#ifndef CONFIG_FMAN_ARM
-+#include <sysdev/fsl_soc.h>
-+#include <linux/fsl/guts.h>
-+#include <linux/fsl/svr.h>
-+#endif
-+#include <linux/stat.h>	   /* For file access mask */
-+#include <linux/skbuff.h>
-+#include <linux/proc_fs.h>
-+
-+/* NetCommSw Headers --------------- */
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "sprint_ext.h"
-+#include "debug_ext.h"
-+#include "sys_io_ext.h"
-+
-+#include "fm_ioctls.h"
-+
-+#include "lnxwrp_fm.h"
-+#include "lnxwrp_resources.h"
-+#include "lnxwrp_sysfs_fm.h"
-+#include "lnxwrp_sysfs_fm_port.h"
-+#include "lnxwrp_exp_sym.h"
-+#include "fm_common.h"
-+#include "../../sdk_fman/Peripherals/FM/fm.h"
-+#define __ERR_MODULE__  MODULE_FM
-+
-+extern struct device_node *GetFmPortAdvArgsDevTreeNode (struct device_node *fm_node,
-+                                                         e_FmPortType       portType,
-+                                                         uint8_t            portId);
-+
-+#define PROC_PRINT(args...) offset += sprintf(buf+offset,args)
-+
-+#define ADD_ADV_CONFIG_NO_RET(_func, _param)    \
-+    do {                                        \
-+        if (i<max){                             \
-+            p_Entry = &p_Entrys[i];             \
-+            p_Entry->p_Function = _func;        \
-+            _param                              \
-+            i++;                                \
-+        }                                       \
-+        else                                    \
-+            REPORT_ERROR(MAJOR, E_INVALID_VALUE,\
-+                         ("Number of advanced-configuration entries exceeded"));\
-+    } while (0)
-+
-+/* Bootarg used to override the Kconfig FSL_FM_MAX_FRAME_SIZE value */
-+#define FSL_FM_MAX_FRM_BOOTARG     "fsl_fm_max_frm"
-+
-+/* Bootarg used to override FSL_FM_RX_EXTRA_HEADROOM Kconfig value */
-+#define FSL_FM_RX_EXTRA_HEADROOM_BOOTARG  "fsl_fm_rx_extra_headroom"
-+
-+/* Minimum and maximum value for the fsl_fm_rx_extra_headroom bootarg */
-+#define FSL_FM_RX_EXTRA_HEADROOM_MIN 16
-+#define FSL_FM_RX_EXTRA_HEADROOM_MAX 384
-+
-+#define FSL_FM_PAUSE_TIME_ENABLE 0xf000
-+#define FSL_FM_PAUSE_TIME_DISABLE 0
-+#define FSL_FM_PAUSE_THRESH_DEFAULT 0
-+
-+/*
-+ * Max frame size, across all interfaces.
-+ * Configurable from Kconfig or bootargs, to avoid allocating
-+ * oversized (socket) buffers when not using jumbo frames.
-+ * Must be large enough to accommodate the network MTU, but small enough
-+ * to avoid wasting skb memory.
-+ *
-+ * Could be overridden once, at boot-time, via the
-+ * fm_set_max_frm() callback.
-+ */
-+int fsl_fm_max_frm = CONFIG_FSL_FM_MAX_FRAME_SIZE;
-+
-+/*
-+ * Extra headroom for Rx buffers.
-+ * FMan is instructed to allocate, on the Rx path, this amount of
-+ * space at the beginning of a data buffer, beside the DPA private
-+ * data area and the IC fields.
-+ * Does not impact Tx buffer layout.
-+ *
-+ * Configurable from Kconfig or bootargs. Zero by default, it's needed
-+ * on particular forwarding scenarios that add extra headers to the
-+ * forwarded frame.
-+ */
-+int fsl_fm_rx_extra_headroom = CONFIG_FSL_FM_RX_EXTRA_HEADROOM;
-+
-+#ifdef CONFIG_FMAN_PFC
-+static int fsl_fm_pfc_quanta[] = {
-+		CONFIG_FMAN_PFC_QUANTA_0,
-+		CONFIG_FMAN_PFC_QUANTA_1,
-+		CONFIG_FMAN_PFC_QUANTA_2,
-+		CONFIG_FMAN_PFC_QUANTA_3
-+};
-+#endif
-+
-+static t_LnxWrpFm   lnxWrpFm;
-+
-+int fm_get_max_frm()
-+{
-+	return fsl_fm_max_frm;
-+}
-+EXPORT_SYMBOL(fm_get_max_frm);
-+
-+int fm_get_rx_extra_headroom()
-+{
-+	return ALIGN(fsl_fm_rx_extra_headroom, 16);
-+}
-+EXPORT_SYMBOL(fm_get_rx_extra_headroom);
-+
-+static int __init fm_set_max_frm(char *str)
-+{
-+	int ret = 0;
-+
-+	ret = get_option(&str, &fsl_fm_max_frm);
-+	if (ret != 1) {
-+		/*
-+		 * This will only work if CONFIG_EARLY_PRINTK is compiled in,
-+		 * and something like "earlyprintk=serial,uart0,115200" is
-+		 * specified in the bootargs
-+		 */
-+		printk(KERN_WARNING "No suitable %s=<int> prop in bootargs; "
-+			"will use the default FSL_FM_MAX_FRAME_SIZE (%d) "
-+			"from Kconfig.\n", FSL_FM_MAX_FRM_BOOTARG,
-+			CONFIG_FSL_FM_MAX_FRAME_SIZE);
-+
-+		fsl_fm_max_frm = CONFIG_FSL_FM_MAX_FRAME_SIZE;
-+		return 1;
-+	}
-+
-+	/* Don't allow invalid bootargs; fallback to the Kconfig value */
-+	if (fsl_fm_max_frm < 64 || fsl_fm_max_frm > 9600) {
-+		printk(KERN_WARNING "Invalid %s=%d in bootargs, valid range is "
-+			"64-9600. Falling back to the FSL_FM_MAX_FRAME_SIZE (%d) "
-+			"from Kconfig.\n",
-+			FSL_FM_MAX_FRM_BOOTARG, fsl_fm_max_frm,
-+			CONFIG_FSL_FM_MAX_FRAME_SIZE);
-+
-+		fsl_fm_max_frm = CONFIG_FSL_FM_MAX_FRAME_SIZE;
-+		return 1;
-+	}
-+
-+	printk(KERN_INFO "Using fsl_fm_max_frm=%d from bootargs\n",
-+		fsl_fm_max_frm);
-+	return 0;
-+}
-+early_param(FSL_FM_MAX_FRM_BOOTARG, fm_set_max_frm);
-+
-+static int __init fm_set_rx_extra_headroom(char *str)
-+{
-+	int ret;
-+
-+	ret = get_option(&str, &fsl_fm_rx_extra_headroom);
-+
-+	if (ret != 1) {
-+		printk(KERN_WARNING "No suitable %s=<int> prop in bootargs; "
-+			"will use the default FSL_FM_RX_EXTRA_HEADROOM (%d) "
-+			"from Kconfig.\n", FSL_FM_RX_EXTRA_HEADROOM_BOOTARG,
-+			CONFIG_FSL_FM_RX_EXTRA_HEADROOM);
-+		fsl_fm_rx_extra_headroom = CONFIG_FSL_FM_RX_EXTRA_HEADROOM;
-+
-+		return 1;
-+	}
-+
-+	if (fsl_fm_rx_extra_headroom < FSL_FM_RX_EXTRA_HEADROOM_MIN ||
-+		fsl_fm_rx_extra_headroom > FSL_FM_RX_EXTRA_HEADROOM_MAX) {
-+		printk(KERN_WARNING "Invalid value for %s=%d prop in "
-+			"bootargs; will use the default "
-+			"FSL_FM_RX_EXTRA_HEADROOM (%d) from Kconfig.\n",
-+			FSL_FM_RX_EXTRA_HEADROOM_BOOTARG,
-+			fsl_fm_rx_extra_headroom,
-+			CONFIG_FSL_FM_RX_EXTRA_HEADROOM);
-+		fsl_fm_rx_extra_headroom = CONFIG_FSL_FM_RX_EXTRA_HEADROOM;
-+	}
-+
-+	printk(KERN_INFO "Using fsl_fm_rx_extra_headroom=%d from bootargs\n",
-+		fsl_fm_rx_extra_headroom);
-+
-+	return 0;
-+}
-+early_param(FSL_FM_RX_EXTRA_HEADROOM_BOOTARG, fm_set_rx_extra_headroom);
-+
-+static irqreturn_t fm_irq(int irq, void *_dev)
-+{
-+    t_LnxWrpFmDev       *p_LnxWrpFmDev = (t_LnxWrpFmDev *)_dev;
-+#ifdef CONFIG_PM_SLEEP
-+    t_Fm               *p_Fm = (t_Fm*)p_LnxWrpFmDev->h_Dev;
-+#endif
-+    if (!p_LnxWrpFmDev || !p_LnxWrpFmDev->h_Dev)
-+        return IRQ_NONE;
-+
-+#ifdef CONFIG_PM_SLEEP
-+    if (fman_get_normal_pending(p_Fm->p_FmFpmRegs) & INTR_EN_WAKEUP)
-+    {
-+        pm_wakeup_event(p_LnxWrpFmDev->dev, 200);        
-+    }
-+#endif
-+    FM_EventIsr(p_LnxWrpFmDev->h_Dev);
-+    return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t fm_err_irq(int irq, void *_dev)
-+{
-+    t_LnxWrpFmDev       *p_LnxWrpFmDev = (t_LnxWrpFmDev *)_dev;
-+
-+    if (!p_LnxWrpFmDev || !p_LnxWrpFmDev->h_Dev)
-+        return IRQ_NONE;
-+
-+    if (FM_ErrorIsr(p_LnxWrpFmDev->h_Dev) == E_OK)
-+        return IRQ_HANDLED;
-+
-+    return IRQ_NONE;
-+}
-+
-+/* used to protect FMD/LLD from concurrent calls in functions fm_mutex_lock / fm_mutex_unlock */
-+static struct mutex   lnxwrp_mutex;
-+
-+static t_LnxWrpFmDev * CreateFmDev(uint8_t  id)
-+{
-+    t_LnxWrpFmDev   *p_LnxWrpFmDev;
-+    int             j;
-+
-+    p_LnxWrpFmDev = (t_LnxWrpFmDev *)XX_Malloc(sizeof(t_LnxWrpFmDev));
-+    if (!p_LnxWrpFmDev)
-+    {
-+        REPORT_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+        return NULL;
-+    }
-+
-+    memset(p_LnxWrpFmDev, 0, sizeof(t_LnxWrpFmDev));
-+    p_LnxWrpFmDev->fmDevSettings.advConfig = (t_SysObjectAdvConfigEntry*)XX_Malloc(FM_MAX_NUM_OF_ADV_SETTINGS*sizeof(t_SysObjectAdvConfigEntry));
-+    memset(p_LnxWrpFmDev->fmDevSettings.advConfig, 0, (FM_MAX_NUM_OF_ADV_SETTINGS*sizeof(t_SysObjectAdvConfigEntry)));
-+    p_LnxWrpFmDev->fmPcdDevSettings.advConfig = (t_SysObjectAdvConfigEntry*)XX_Malloc(FM_MAX_NUM_OF_ADV_SETTINGS*sizeof(t_SysObjectAdvConfigEntry));
-+    memset(p_LnxWrpFmDev->fmPcdDevSettings.advConfig, 0, (FM_MAX_NUM_OF_ADV_SETTINGS*sizeof(t_SysObjectAdvConfigEntry)));
-+    p_LnxWrpFmDev->hcPort.settings.advConfig = (t_SysObjectAdvConfigEntry*)XX_Malloc(FM_MAX_NUM_OF_ADV_SETTINGS*sizeof(t_SysObjectAdvConfigEntry));
-+    memset(p_LnxWrpFmDev->hcPort.settings.advConfig, 0, (FM_MAX_NUM_OF_ADV_SETTINGS*sizeof(t_SysObjectAdvConfigEntry)));
-+    for (j=0; j<FM_MAX_NUM_OF_RX_PORTS; j++)
-+    {
-+        p_LnxWrpFmDev->rxPorts[j].settings.advConfig = (t_SysObjectAdvConfigEntry*)XX_Malloc(FM_MAX_NUM_OF_ADV_SETTINGS*sizeof(t_SysObjectAdvConfigEntry));
-+        memset(p_LnxWrpFmDev->rxPorts[j].settings.advConfig, 0, (FM_MAX_NUM_OF_ADV_SETTINGS*sizeof(t_SysObjectAdvConfigEntry)));
-+    }
-+    for (j=0; j<FM_MAX_NUM_OF_TX_PORTS; j++)
-+    {
-+        p_LnxWrpFmDev->txPorts[j].settings.advConfig = (t_SysObjectAdvConfigEntry*)XX_Malloc(FM_MAX_NUM_OF_ADV_SETTINGS*sizeof(t_SysObjectAdvConfigEntry));
-+        memset(p_LnxWrpFmDev->txPorts[j].settings.advConfig, 0, (FM_MAX_NUM_OF_ADV_SETTINGS*sizeof(t_SysObjectAdvConfigEntry)));
-+    }
-+    for (j=0; j<FM_MAX_NUM_OF_OH_PORTS-1; j++)
-+    {
-+        p_LnxWrpFmDev->opPorts[j].settings.advConfig = (t_SysObjectAdvConfigEntry*)XX_Malloc(FM_MAX_NUM_OF_ADV_SETTINGS*sizeof(t_SysObjectAdvConfigEntry));
-+        memset(p_LnxWrpFmDev->opPorts[j].settings.advConfig, 0, (FM_MAX_NUM_OF_ADV_SETTINGS*sizeof(t_SysObjectAdvConfigEntry)));
-+    }
-+
-+    return p_LnxWrpFmDev;
-+}
-+
-+static void DestroyFmDev(t_LnxWrpFmDev *p_LnxWrpFmDev)
-+{
-+    int             j;
-+
-+    for (j=0; j<FM_MAX_NUM_OF_OH_PORTS-1; j++)
-+        if (p_LnxWrpFmDev->opPorts[j].settings.advConfig)
-+            XX_Free(p_LnxWrpFmDev->opPorts[j].settings.advConfig);
-+    for (j=0; j<FM_MAX_NUM_OF_TX_PORTS; j++)
-+        if (p_LnxWrpFmDev->txPorts[j].settings.advConfig)
-+            XX_Free(p_LnxWrpFmDev->txPorts[j].settings.advConfig);
-+    for (j=0; j<FM_MAX_NUM_OF_RX_PORTS; j++)
-+        if (p_LnxWrpFmDev->rxPorts[j].settings.advConfig)
-+            XX_Free(p_LnxWrpFmDev->rxPorts[j].settings.advConfig);
-+    if (p_LnxWrpFmDev->hcPort.settings.advConfig)
-+        XX_Free(p_LnxWrpFmDev->hcPort.settings.advConfig);
-+    if (p_LnxWrpFmDev->fmPcdDevSettings.advConfig)
-+        XX_Free(p_LnxWrpFmDev->fmPcdDevSettings.advConfig);
-+    if (p_LnxWrpFmDev->fmDevSettings.advConfig)
-+        XX_Free(p_LnxWrpFmDev->fmDevSettings.advConfig);
-+
-+    XX_Free(p_LnxWrpFmDev);
-+}
-+
-+static t_Error FillRestFmInfo(t_LnxWrpFmDev *p_LnxWrpFmDev)
-+{
-+#define FM_BMI_PPIDS_OFFSET                 0x00080304
-+#define FM_DMA_PLR_OFFSET                   0x000c2060
-+#define FM_FPM_IP_REV_1_OFFSET              0x000c30c4
-+#define DMA_HIGH_LIODN_MASK                 0x0FFF0000
-+#define DMA_LOW_LIODN_MASK                  0x00000FFF
-+#define DMA_LIODN_SHIFT                     16
-+
-+typedef _Packed struct {
-+    uint32_t    plr[32];
-+} _PackedType t_Plr;
-+
-+typedef _Packed struct {
-+   volatile uint32_t   fmbm_ppid[63];
-+} _PackedType t_Ppids;
-+
-+    t_Plr       *p_Plr;
-+    t_Ppids     *p_Ppids;
-+    int         i,j;
-+    uint32_t    fmRev;
-+
-+    static const uint8_t     phys1GRxPortId[] = {0x8,0x9,0xa,0xb,0xc,0xd,0xe,0xf};
-+    static const uint8_t     phys10GRxPortId[] = {0x10,0x11};
-+#if (DPAA_VERSION >= 11)
-+    static const uint8_t     physOhPortId[] = {/* 0x1, */0x2,0x3,0x4,0x5,0x6,0x7};
-+#else
-+    static const uint8_t     physOhPortId[] = {0x1,0x2,0x3,0x4,0x5,0x6,0x7};
-+#endif
-+    static const uint8_t     phys1GTxPortId[] = {0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f};
-+    static const uint8_t     phys10GTxPortId[] = {0x30,0x31};
-+
-+    fmRev = (uint32_t)(*((volatile uint32_t *)UINT_TO_PTR(p_LnxWrpFmDev->fmBaseAddr+FM_FPM_IP_REV_1_OFFSET)));
-+    fmRev &= 0xffff;
-+
-+    p_Plr = (t_Plr *)UINT_TO_PTR(p_LnxWrpFmDev->fmBaseAddr+FM_DMA_PLR_OFFSET);
-+#ifdef MODULE
-+    for (i=0;i<FM_MAX_NUM_OF_PARTITIONS/2;i++)
-+        p_Plr->plr[i] = 0;
-+#endif /* MODULE */
-+
-+    for (i=0; i<FM_MAX_NUM_OF_PARTITIONS; i++)
-+    {
-+        uint16_t liodnBase = (uint16_t)((i%2) ?
-+                       (p_Plr->plr[i/2] & DMA_LOW_LIODN_MASK) :
-+                       ((p_Plr->plr[i/2] & DMA_HIGH_LIODN_MASK) >> DMA_LIODN_SHIFT));
-+#ifdef FM_PARTITION_ARRAY
-+        /* TODO: this was .liodnPerPartition[i] = liodnBase; is the index meaning the same? */
-+        p_LnxWrpFmDev->fmDevSettings.param.liodnBasePerPort[i] = liodnBase;
-+#endif /* FM_PARTITION_ARRAY */
-+
-+        if ((i >= phys1GRxPortId[0]) &&
-+             (i <= phys1GRxPortId[FM_MAX_NUM_OF_1G_RX_PORTS-1]))
-+        {
-+            for (j=0; j<ARRAY_SIZE(phys1GRxPortId); j++)
-+                if (phys1GRxPortId[j] == i)
-+                    break;
-+            ASSERT_COND(j<ARRAY_SIZE(phys1GRxPortId));
-+            p_LnxWrpFmDev->rxPorts[j].settings.param.liodnBase = liodnBase;
-+        }
-+        else if (FM_MAX_NUM_OF_10G_RX_PORTS &&
-+                 (i >= phys10GRxPortId[0]) &&
-+                 (i <= phys10GRxPortId[FM_MAX_NUM_OF_10G_RX_PORTS-1]))
-+        {
-+            for (j=0; j<ARRAY_SIZE(phys10GRxPortId); j++)
-+                if (phys10GRxPortId[j] == i)
-+                    break;
-+            ASSERT_COND(j<ARRAY_SIZE(phys10GRxPortId));
-+            p_LnxWrpFmDev->rxPorts[FM_MAX_NUM_OF_1G_RX_PORTS+j].settings.param.liodnBase = liodnBase;
-+        }
-+        else if ((i >= physOhPortId[0]) &&
-+                 (i <= physOhPortId[FM_MAX_NUM_OF_OH_PORTS-1]))
-+        {
-+            for (j=0; j<ARRAY_SIZE(physOhPortId); j++)
-+                if (physOhPortId[j] == i)
-+                    break;
-+            ASSERT_COND(j<ARRAY_SIZE(physOhPortId));
-+            if (j == 0)
-+                p_LnxWrpFmDev->hcPort.settings.param.liodnBase = liodnBase;
-+            else
-+                p_LnxWrpFmDev->opPorts[j - 1].settings.param.liodnBase = liodnBase;
-+        }
-+        else if ((i >= phys1GTxPortId[0]) &&
-+                  (i <= phys1GTxPortId[FM_MAX_NUM_OF_1G_TX_PORTS-1]))
-+        {
-+            for (j=0; j<ARRAY_SIZE(phys1GTxPortId); j++)
-+                if (phys1GTxPortId[j] == i)
-+                    break;
-+            ASSERT_COND(j<ARRAY_SIZE(phys1GTxPortId));
-+            p_LnxWrpFmDev->txPorts[j].settings.param.liodnBase = liodnBase;
-+        }
-+        else if (FM_MAX_NUM_OF_10G_TX_PORTS &&
-+                 (i >= phys10GTxPortId[0]) &&
-+                 (i <= phys10GTxPortId[FM_MAX_NUM_OF_10G_TX_PORTS-1]))
-+        {
-+            for (j=0; j<ARRAY_SIZE(phys10GTxPortId); j++)
-+                if (phys10GTxPortId[j] == i)
-+                    break;
-+            ASSERT_COND(j<ARRAY_SIZE(phys10GTxPortId));
-+            p_LnxWrpFmDev->txPorts[FM_MAX_NUM_OF_1G_TX_PORTS+j].settings.param.liodnBase = liodnBase;
-+        }
-+    }
-+
-+    p_Ppids = (t_Ppids *)UINT_TO_PTR(p_LnxWrpFmDev->fmBaseAddr+FM_BMI_PPIDS_OFFSET);
-+
-+    for (i=0; i<FM_MAX_NUM_OF_1G_RX_PORTS; i++)
-+        p_LnxWrpFmDev->rxPorts[i].settings.param.specificParams.rxParams.liodnOffset =
-+                p_Ppids->fmbm_ppid[phys1GRxPortId[i]-1];
-+
-+    for (i=0; i<FM_MAX_NUM_OF_10G_RX_PORTS; i++)
-+            p_LnxWrpFmDev->rxPorts[FM_MAX_NUM_OF_1G_RX_PORTS+i].settings.param.specificParams.rxParams.liodnOffset =
-+                p_Ppids->fmbm_ppid[phys10GRxPortId[i]-1];
-+
-+    return E_OK;
-+}
-+
-+/* Structure that defines QE firmware binary files.
-+ *
-+ * See Documentation/powerpc/qe_firmware.txt for a description of these
-+ * fields.
-+ */
-+struct qe_firmware {
-+        struct qe_header {
-+                __be32 length;  /* Length of the entire structure, in bytes */
-+                u8 magic[3];    /* Set to { 'Q', 'E', 'F' } */
-+                u8 version;     /* Version of this layout. First ver is '1' */
-+        } header;
-+        u8 id[62];      /* Null-terminated identifier string */
-+        u8 split;       /* 0 = shared I-RAM, 1 = split I-RAM */
-+        u8 count;       /* Number of microcode[] structures */
-+        struct {
-+                __be16 model;           /* The SOC model  */
-+                u8 major;               /* The SOC revision major */
-+                u8 minor;               /* The SOC revision minor */
-+        } __attribute__ ((packed)) soc;
-+        u8 padding[4];                  /* Reserved, for alignment */
-+        __be64 extended_modes;          /* Extended modes */
-+        __be32 vtraps[8];               /* Virtual trap addresses */
-+        u8 reserved[4];                 /* Reserved, for future expansion */
-+        struct qe_microcode {
-+                u8 id[32];              /* Null-terminated identifier */
-+                __be32 traps[16];       /* Trap addresses, 0 == ignore */
-+                __be32 eccr;            /* The value for the ECCR register */
-+                __be32 iram_offset;     /* Offset into I-RAM for the code */
-+                __be32 count;           /* Number of 32-bit words of the code */
-+                __be32 code_offset;     /* Offset of the actual microcode */
-+                u8 major;               /* The microcode version major */
-+                u8 minor;               /* The microcode version minor */
-+                u8 revision;            /* The microcode version revision */
-+                u8 padding;             /* Reserved, for alignment */
-+                u8 reserved[4];         /* Reserved, for future expansion */
-+        } __attribute__ ((packed)) microcode[1];
-+        /* All microcode binaries should be located here */
-+        /* CRC32 should be located here, after the microcode binaries */
-+} __attribute__ ((packed));
-+
-+
-+/**
-+ * FindFmanMicrocode - find the Fman microcode
-+ *
-+ * This function returns a pointer to the QE Firmware blob that holds
-+ * the Fman microcode.  We use the QE Firmware structure because Fman microcode
-+ * is similar to QE microcode, so there's no point in defining a new layout.
-+ *
-+ * Current versions of U-Boot embed the Fman firmware into the device tree,
-+ * so we check for that first.  Each Fman node in the device tree contains a
-+ * node or a pointer to node that holds the firmware.  Technically, we should
-+ * be fetching the firmware node for the current Fman, but we don't have that
-+ * information any more, so we assume that there is only one firmware node in
-+ * the device tree, and that all Fmen use the same firmware.
-+ */
-+static const struct qe_firmware *FindFmanMicrocode(void)
-+{
-+    static const struct qe_firmware *P4080_UCPatch;
-+    struct device_node *np;
-+
-+    if (P4080_UCPatch)
-+	    return P4080_UCPatch;
-+
-+    /* The firmware should be inside the device tree. */
-+    np = of_find_compatible_node(NULL, NULL, "fsl,fman-firmware");
-+    if (np) {
-+	    P4080_UCPatch = of_get_property(np, "fsl,firmware", NULL);
-+            of_node_put(np);
-+	    if (P4080_UCPatch)
-+		    return P4080_UCPatch;
-+	    else
-+		    REPORT_ERROR(WARNING, E_NOT_FOUND, ("firmware node is incomplete"));
-+    }
-+
-+    /* Returning NULL here forces the reuse of the IRAM content */
-+    return NULL;
-+}
-+#define SVR_SECURITY_MASK    0x00080000
-+#define SVR_PERSONALITY_MASK 0x0000FF00
-+#define SVR_VER_IGNORE_MASK (SVR_SECURITY_MASK | SVR_PERSONALITY_MASK)
-+#define SVR_B4860_REV1_VALUE 0x86800010
-+#define SVR_B4860_REV2_VALUE 0x86800020
-+#define SVR_T4240_VALUE      0x82400000
-+#define SVR_T4120_VALUE      0x82400100
-+#define SVR_T4160_VALUE      0x82410000
-+#define SVR_T4080_VALUE      0x82410200
-+#define SVR_T4_DEVICE_ID     0x82400000
-+#define SVR_DEVICE_ID_MASK   0xFFF00000
-+
-+#define OF_DEV_ID_NUM 2 /* one used, another one zeroed */
-+
-+/* searches for a subnode with the given name/compatible  */
-+static bool HasFmPcdOfNode(struct device_node *fm_node,
-+                           struct of_device_id *ids,
-+                           const char *name,
-+                           const char *compatible)
-+{
-+    struct device_node *dev_node;
-+    bool ret = false;
-+
-+    memset(ids, 0, OF_DEV_ID_NUM*sizeof(struct of_device_id));
-+    if (WARN_ON(strlen(name) >= sizeof(ids[0].name)))
-+        return false;
-+    strcpy(ids[0].name, name);
-+    if (WARN_ON(strlen(compatible) >= sizeof(ids[0].compatible)))
-+        return false;
-+    strcpy(ids[0].compatible, compatible);
-+    for_each_child_of_node(fm_node, dev_node)
-+        if (of_match_node(ids, dev_node) != NULL)
-+            ret = true;
-+    return ret;
-+}
-+
-+static t_LnxWrpFmDev * ReadFmDevTreeNode (struct platform_device *of_dev)
-+{
-+    t_LnxWrpFmDev       *p_LnxWrpFmDev;
-+    struct device_node  *fm_node, *dev_node;
-+    struct of_device_id ids[OF_DEV_ID_NUM];
-+    struct resource     res;
-+    struct clk *clk;
-+    u32 clk_rate;
-+    const uint32_t      *uint32_prop;
-+    int                 _errno=0, lenp;
-+    uint32_t            tmp_prop;
-+
-+    fm_node = of_node_get(of_dev->dev.of_node);
-+
-+    uint32_prop = (uint32_t *)of_get_property(fm_node, "cell-index", &lenp);
-+    if (unlikely(uint32_prop == NULL)) {
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("of_get_property(%s, cell-index) failed", fm_node->full_name));
-+        return NULL;
-+    }
-+    tmp_prop = be32_to_cpu(*uint32_prop);
-+
-+    if (WARN_ON(lenp != sizeof(uint32_t)))
-+        return NULL;
-+
-+    if (tmp_prop > INTG_MAX_NUM_OF_FM) {
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("fm id!"));
-+        return NULL;
-+    }
-+    p_LnxWrpFmDev = CreateFmDev(tmp_prop);
-+    if (!p_LnxWrpFmDev) {
-+        REPORT_ERROR(MAJOR, E_NULL_POINTER, NO_MSG);
-+        return NULL;
-+    }
-+    p_LnxWrpFmDev->dev = &of_dev->dev;
-+    p_LnxWrpFmDev->id = tmp_prop;
-+
-+    /* Get the FM interrupt */
-+    p_LnxWrpFmDev->irq = of_irq_to_resource(fm_node, 0, NULL);
-+    if (unlikely(p_LnxWrpFmDev->irq == /*NO_IRQ*/0)) {
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("of_irq_to_resource() = %d", NO_IRQ));
-+        DestroyFmDev(p_LnxWrpFmDev);
-+        return NULL;
-+    }
-+
-+    /* Get the FM error interrupt */
-+    p_LnxWrpFmDev->err_irq = of_irq_to_resource(fm_node, 1, NULL);
-+
-+    if (unlikely(p_LnxWrpFmDev->err_irq == /*NO_IRQ*/0)) {
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("of_irq_to_resource() = %d", NO_IRQ));
-+        DestroyFmDev(p_LnxWrpFmDev);
-+        return NULL;
-+    }
-+
-+    /* Get the FM address */
-+    _errno = of_address_to_resource(fm_node, 0, &res);
-+    if (unlikely(_errno < 0)) {
-+        REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("of_address_to_resource() = %d", _errno));
-+        DestroyFmDev(p_LnxWrpFmDev);
-+        return NULL;
-+    }
-+
-+
-+    p_LnxWrpFmDev->fmBaseAddr = 0;
-+    p_LnxWrpFmDev->fmPhysBaseAddr = res.start;
-+    p_LnxWrpFmDev->fmMemSize = res.end + 1 - res.start;
-+
-+    clk = of_clk_get(fm_node, 0);
-+    if (IS_ERR(clk)) {
-+        dev_err(&of_dev->dev, "%s: Failed to get FM clock structure\n",
-+                __func__);
-+        of_node_put(fm_node);
-+        DestroyFmDev(p_LnxWrpFmDev);
-+        return NULL;
-+    }
-+
-+    clk_rate = clk_get_rate(clk);
-+    if (!clk_rate) {
-+        dev_err(&of_dev->dev, "%s: Failed to determine FM clock rate\n",
-+                __func__);
-+        of_node_put(fm_node);
-+        DestroyFmDev(p_LnxWrpFmDev);
-+        return NULL;
-+    }
-+
-+    p_LnxWrpFmDev->fmDevSettings.param.fmClkFreq = DIV_ROUND_UP(clk_rate, 1000000); /* In MHz, rounded */
-+    /* Get the MURAM base address and size */
-+    memset(ids, 0, sizeof(ids));
-+    if (WARN_ON(strlen("muram") >= sizeof(ids[0].name)))
-+        return NULL;
-+    strcpy(ids[0].name, "muram");
-+    if (WARN_ON(strlen("fsl,fman-muram") >= sizeof(ids[0].compatible)))
-+        return NULL;
-+    strcpy(ids[0].compatible, "fsl,fman-muram");
-+    for_each_child_of_node(fm_node, dev_node) {
-+        if (likely(of_match_node(ids, dev_node) != NULL)) {
-+            _errno = of_address_to_resource(dev_node, 0, &res);
-+            if (unlikely(_errno < 0)) {
-+                REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("of_address_to_resource() = %d", _errno));
-+                DestroyFmDev(p_LnxWrpFmDev);
-+                return NULL;
-+            }
-+
-+            p_LnxWrpFmDev->fmMuramBaseAddr = 0;
-+            p_LnxWrpFmDev->fmMuramPhysBaseAddr = res.start;
-+            p_LnxWrpFmDev->fmMuramMemSize = res.end + 1 - res.start;
-+
-+#ifndef CONFIG_FMAN_ARM
-+            {
-+               uint32_t svr;
-+                svr = mfspr(SPRN_SVR);
-+
-+                if ((svr & ~SVR_VER_IGNORE_MASK) >= SVR_B4860_REV2_VALUE)
-+                    p_LnxWrpFmDev->fmMuramMemSize = 0x80000;
-+            }
-+#endif
-+        }
-+    }
-+
-+    /* Get the RTC base address and size */
-+    memset(ids, 0, sizeof(ids));
-+    if (WARN_ON(strlen("rtc") >= sizeof(ids[0].name)))
-+        return NULL;
-+    strcpy(ids[0].name, "rtc");
-+    if (WARN_ON(strlen("fsl,fman-rtc") >= sizeof(ids[0].compatible)))
-+        return NULL;
-+    strcpy(ids[0].compatible, "fsl,fman-rtc");
-+    for_each_child_of_node(fm_node, dev_node) {
-+        if (likely(of_match_node(ids, dev_node) != NULL)) {
-+            _errno = of_address_to_resource(dev_node, 0, &res);
-+            if (unlikely(_errno < 0)) {
-+                REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("of_address_to_resource() = %d", _errno));
-+                DestroyFmDev(p_LnxWrpFmDev);
-+                return NULL;
-+            }
-+
-+            p_LnxWrpFmDev->fmRtcBaseAddr = 0;
-+            p_LnxWrpFmDev->fmRtcPhysBaseAddr = res.start;
-+            p_LnxWrpFmDev->fmRtcMemSize = res.end + 1 - res.start;
-+        }
-+    }
-+
-+#if (DPAA_VERSION >= 11)
-+    /* Get the VSP base address */
-+    for_each_child_of_node(fm_node, dev_node) {
-+        if (of_device_is_compatible(dev_node, "fsl,fman-vsps")) {
-+            _errno = of_address_to_resource(dev_node, 0, &res);
-+            if (unlikely(_errno < 0)) {
-+                REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("of_address_to_resource() = %d", _errno));
-+                DestroyFmDev(p_LnxWrpFmDev);
-+                return NULL;
-+            }
-+            p_LnxWrpFmDev->fmVspBaseAddr = 0;
-+            p_LnxWrpFmDev->fmVspPhysBaseAddr = res.start;
-+            p_LnxWrpFmDev->fmVspMemSize = res.end + 1 - res.start;
-+        }
-+    }
-+#endif
-+
-+    /* Get all PCD nodes */
-+    p_LnxWrpFmDev->prsActive = HasFmPcdOfNode(fm_node, ids, "parser", "fsl,fman-parser");
-+    p_LnxWrpFmDev->kgActive = HasFmPcdOfNode(fm_node, ids, "keygen", "fsl,fman-keygen");
-+    p_LnxWrpFmDev->ccActive = HasFmPcdOfNode(fm_node, ids, "cc", "fsl,fman-cc");
-+    p_LnxWrpFmDev->plcrActive = HasFmPcdOfNode(fm_node, ids, "policer", "fsl,fman-policer");
-+
-+    if (p_LnxWrpFmDev->prsActive || p_LnxWrpFmDev->kgActive ||
-+        p_LnxWrpFmDev->ccActive || p_LnxWrpFmDev->plcrActive)
-+        p_LnxWrpFmDev->pcdActive = TRUE;
-+
-+    if (p_LnxWrpFmDev->pcdActive)
-+    {
-+        const char *str_prop = (char *)of_get_property(fm_node, "fsl,default-pcd", &lenp);
-+        if (str_prop) {
-+            if (strncmp(str_prop, "3-tuple", strlen("3-tuple")) == 0)
-+                p_LnxWrpFmDev->defPcd = e_FM_PCD_3_TUPLE;
-+        }
-+        else
-+            p_LnxWrpFmDev->defPcd = e_NO_PCD;
-+    }
-+
-+    of_node_put(fm_node);
-+
-+    p_LnxWrpFmDev->hcCh =
-+        qman_affine_channel(cpumask_first(qman_affine_cpus()));
-+
-+    p_LnxWrpFmDev->active = TRUE;
-+
-+    return p_LnxWrpFmDev;
-+}
-+
-+struct device_node *GetFmAdvArgsDevTreeNode (uint8_t fmIndx)
-+{
-+    struct device_node  *dev_node;
-+    const uint32_t      *uint32_prop;
-+    int                 lenp;
-+    uint32_t            tmp_prop;
-+
-+    for_each_compatible_node(dev_node, NULL, "fsl,fman-extended-args") {
-+        uint32_prop = (uint32_t *)of_get_property(dev_node, "cell-index", &lenp);
-+        if (unlikely(uint32_prop == NULL)) {
-+            REPORT_ERROR(MAJOR, E_INVALID_VALUE,
-+                         ("of_get_property(%s, cell-index) failed",
-+                          dev_node->full_name));
-+            return NULL;
-+        }
-+        tmp_prop = be32_to_cpu(*uint32_prop);
-+        if (WARN_ON(lenp != sizeof(uint32_t)))
-+            return NULL;
-+        if (tmp_prop > INTG_MAX_NUM_OF_FM) {
-+            REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("fm id!"));
-+            return NULL;
-+        }
-+        if (fmIndx == tmp_prop)
-+            return dev_node;
-+    }
-+
-+    return NULL;
-+}
-+
-+static t_Error CheckNConfigFmAdvArgs (t_LnxWrpFmDev *p_LnxWrpFmDev)
-+{
-+    struct device_node  *dev_node;
-+    t_Error             err = E_INVALID_VALUE;
-+    const uint32_t      *uint32_prop;
-+    const char          *str_prop;
-+    int                 lenp;
-+    uint32_t            tmp_prop;
-+
-+    dev_node = GetFmAdvArgsDevTreeNode(p_LnxWrpFmDev->id);
-+    if (!dev_node) /* no advance parameters for FMan */
-+        return E_OK;
-+
-+    str_prop = (char *)of_get_property(dev_node, "dma-aid-mode", &lenp);
-+    if (str_prop) {
-+        if (strcmp(str_prop, "port") == 0)
-+            err = FM_ConfigDmaAidMode(p_LnxWrpFmDev->h_Dev, e_FM_DMA_AID_OUT_PORT_ID);
-+        else if (strcmp(str_prop, "tnum") == 0)
-+            err = FM_ConfigDmaAidMode(p_LnxWrpFmDev->h_Dev, e_FM_DMA_AID_OUT_TNUM);
-+
-+        if (err != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+
-+	uint32_prop = (uint32_t *)of_get_property(dev_node,
-+						"total-fifo-size", &lenp);
-+	if (uint32_prop) {
-+		tmp_prop = be32_to_cpu(*uint32_prop);
-+		if (WARN_ON(lenp != sizeof(uint32_t)))
-+			RETURN_ERROR(MINOR, E_INVALID_VALUE, NO_MSG);
-+
-+		if (FM_ConfigTotalFifoSize(p_LnxWrpFmDev->h_Dev,
-+				tmp_prop) != E_OK)
-+			RETURN_ERROR(MINOR, E_INVALID_VALUE, NO_MSG);
-+	}
-+
-+    uint32_prop = (uint32_t *)of_get_property(dev_node, "tnum-aging-period",
-+	&lenp);
-+	if (uint32_prop) {
-+		tmp_prop = be32_to_cpu(*uint32_prop);
-+		if (WARN_ON(lenp != sizeof(uint32_t)))
-+			RETURN_ERROR(MINOR, E_INVALID_VALUE, NO_MSG);
-+
-+        err = FM_ConfigTnumAgingPeriod(p_LnxWrpFmDev->h_Dev,
-+            (uint16_t)tmp_prop/*tnumAgingPeriod*/);
-+
-+        if (err != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+
-+    of_node_put(dev_node);
-+
-+    return E_OK;
-+}
-+
-+static void LnxwrpFmDevExceptionsCb(t_Handle h_App, e_FmExceptions exception)
-+{
-+    t_LnxWrpFmDev       *p_LnxWrpFmDev = (t_LnxWrpFmDev *)h_App;
-+
-+    ASSERT_COND(p_LnxWrpFmDev);
-+
-+    DBG(INFO, ("got fm exception %d", exception));
-+
-+    /* do nothing */
-+    UNUSED(exception);
-+}
-+
-+static void LnxwrpFmDevBusErrorCb(t_Handle        h_App,
-+                                  e_FmPortType    portType,
-+                                  uint8_t         portId,
-+                                  uint64_t        addr,
-+                                  uint8_t         tnum,
-+                                  uint16_t        liodn)
-+{
-+    t_LnxWrpFmDev       *p_LnxWrpFmDev = (t_LnxWrpFmDev *)h_App;
-+
-+    ASSERT_COND(p_LnxWrpFmDev);
-+
-+    /* do nothing */
-+    UNUSED(portType);UNUSED(portId);UNUSED(addr);UNUSED(tnum);UNUSED(liodn);
-+}
-+
-+static t_Error ConfigureFmDev(t_LnxWrpFmDev  *p_LnxWrpFmDev)
-+{
-+    struct resource     *dev_res;
-+    int                 _errno;
-+
-+    if (!p_LnxWrpFmDev->active)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM not configured!!!"));
-+
-+#ifndef MODULE
-+    _errno = can_request_irq(p_LnxWrpFmDev->irq, 0);
-+    if (unlikely(_errno < 0))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("can_request_irq() = %d", _errno));
-+#endif
-+    _errno = devm_request_irq(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->irq, fm_irq, 0, "fman", p_LnxWrpFmDev);
-+    if (unlikely(_errno < 0))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("request_irq(%d) = %d", p_LnxWrpFmDev->irq, _errno));
-+
-+    enable_irq_wake(p_LnxWrpFmDev->irq);
-+
-+    if (p_LnxWrpFmDev->err_irq != 0) {
-+#ifndef MODULE
-+        _errno = can_request_irq(p_LnxWrpFmDev->err_irq, 0);
-+        if (unlikely(_errno < 0))
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("can_request_irq() = %d", _errno));
-+#endif
-+        _errno = devm_request_irq(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->err_irq, fm_err_irq, IRQF_SHARED, "fman-err", p_LnxWrpFmDev);
-+        if (unlikely(_errno < 0))
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("request_irq(%d) = %d", p_LnxWrpFmDev->err_irq, _errno));
-+
-+	enable_irq_wake(p_LnxWrpFmDev->err_irq);
-+    }
-+
-+    p_LnxWrpFmDev->res = devm_request_mem_region(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->fmPhysBaseAddr, p_LnxWrpFmDev->fmMemSize, "fman");
-+    if (unlikely(p_LnxWrpFmDev->res == NULL))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("request_mem_region() failed"));
-+
-+    p_LnxWrpFmDev->fmBaseAddr = PTR_TO_UINT(devm_ioremap(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->fmPhysBaseAddr, p_LnxWrpFmDev->fmMemSize));
-+    if (unlikely(p_LnxWrpFmDev->fmBaseAddr == 0))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("devm_ioremap() failed"));
-+
-+    if (SYS_RegisterIoMap((uint64_t)p_LnxWrpFmDev->fmBaseAddr, (uint64_t)p_LnxWrpFmDev->fmPhysBaseAddr, p_LnxWrpFmDev->fmMemSize) != E_OK)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM memory map"));
-+
-+    dev_res = __devm_request_region(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->res, p_LnxWrpFmDev->fmMuramPhysBaseAddr, p_LnxWrpFmDev->fmMuramMemSize, "fman-muram");
-+    if (unlikely(dev_res == NULL))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("__devm_request_region() failed"));
-+
-+    p_LnxWrpFmDev->fmMuramBaseAddr = PTR_TO_UINT(devm_ioremap(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->fmMuramPhysBaseAddr, p_LnxWrpFmDev->fmMuramMemSize));
-+    if (unlikely(p_LnxWrpFmDev->fmMuramBaseAddr == 0))
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("devm_ioremap() failed"));
-+
-+    if (SYS_RegisterIoMap((uint64_t)p_LnxWrpFmDev->fmMuramBaseAddr, (uint64_t)p_LnxWrpFmDev->fmMuramPhysBaseAddr, p_LnxWrpFmDev->fmMuramMemSize) != E_OK)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM MURAM memory map"));
-+
-+    if (p_LnxWrpFmDev->fmRtcPhysBaseAddr)
-+    {
-+        dev_res = __devm_request_region(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->res, p_LnxWrpFmDev->fmRtcPhysBaseAddr, p_LnxWrpFmDev->fmRtcMemSize, "fman-rtc");
-+        if (unlikely(dev_res == NULL))
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("__devm_request_region() failed"));
-+
-+        p_LnxWrpFmDev->fmRtcBaseAddr = PTR_TO_UINT(devm_ioremap(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->fmRtcPhysBaseAddr, p_LnxWrpFmDev->fmRtcMemSize));
-+        if (unlikely(p_LnxWrpFmDev->fmRtcBaseAddr == 0))
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("devm_ioremap() failed"));
-+
-+        if (SYS_RegisterIoMap((uint64_t)p_LnxWrpFmDev->fmRtcBaseAddr, (uint64_t)p_LnxWrpFmDev->fmRtcPhysBaseAddr, p_LnxWrpFmDev->fmRtcMemSize) != E_OK)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM-RTC memory map"));
-+    }
-+
-+#if (DPAA_VERSION >= 11)
-+    if (p_LnxWrpFmDev->fmVspPhysBaseAddr) {
-+        dev_res = __devm_request_region(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->res, p_LnxWrpFmDev->fmVspPhysBaseAddr, p_LnxWrpFmDev->fmVspMemSize, "fman-vsp");
-+        if (unlikely(dev_res == NULL))
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("__devm_request_region() failed"));
-+
-+        p_LnxWrpFmDev->fmVspBaseAddr = PTR_TO_UINT(devm_ioremap(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->fmVspPhysBaseAddr, p_LnxWrpFmDev->fmVspMemSize));
-+        if (unlikely(p_LnxWrpFmDev->fmVspBaseAddr == 0))
-+	    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("devm_ioremap() failed"));
-+    }
-+#endif
-+
-+    p_LnxWrpFmDev->fmDevSettings.param.baseAddr     = p_LnxWrpFmDev->fmBaseAddr;
-+    p_LnxWrpFmDev->fmDevSettings.param.fmId         = p_LnxWrpFmDev->id;
-+    p_LnxWrpFmDev->fmDevSettings.param.irq          = NO_IRQ;
-+    p_LnxWrpFmDev->fmDevSettings.param.errIrq       = NO_IRQ;
-+    p_LnxWrpFmDev->fmDevSettings.param.f_Exception  = LnxwrpFmDevExceptionsCb;
-+    p_LnxWrpFmDev->fmDevSettings.param.f_BusError   = LnxwrpFmDevBusErrorCb;
-+    p_LnxWrpFmDev->fmDevSettings.param.h_App        = p_LnxWrpFmDev;
-+
-+    return FillRestFmInfo(p_LnxWrpFmDev);
-+}
-+
-+#ifndef CONFIG_FMAN_ARM
-+/*
-+ * Table for matching compatible strings, for device tree
-+ * guts node, for QorIQ SOCs.
-+ * "fsl,qoriq-device-config-2.0" corresponds to T4 & B4
-+ * SOCs. For the older SOCs "fsl,qoriq-device-config-1.0"
-+ * string would be used.
-+*/
-+static const struct of_device_id guts_device_ids[] = {
-+        { .compatible = "fsl,qoriq-device-config-1.0", },
-+        { .compatible = "fsl,qoriq-device-config-2.0", },
-+        {}
-+};
-+
-+static unsigned int get_rcwsr(int regnum)
-+{
-+	struct ccsr_guts __iomem *guts_regs = NULL;
-+	struct device_node *guts_node;
-+
-+	guts_node = of_find_matching_node(NULL, guts_device_ids);
-+	if (!guts_node) {
-+		pr_err("could not find GUTS node\n");
-+		return 0;
-+	}
-+	guts_regs = of_iomap(guts_node, 0);
-+	of_node_put(guts_node);
-+	if (!guts_regs) {
-+		pr_err("ioremap of GUTS node failed\n");
-+		return 0;
-+	}
-+
-+	return ioread32be(&guts_regs->rcwsr[regnum]);
-+}
-+
-+#define FMAN1_ALL_MACS_MASK	0xFCC00000
-+#define FMAN2_ALL_MACS_MASK	0x000FCC00
-+
-+/**
-+ * @Function      	ResetOnInitErrata_A007273
-+ *
-+ * @Description		Workaround for Errata A-007273
-+ * 					This workaround is required to avoid a FMan hang during reset on initialization.
-+ * 					Enable all MACs in guts.devdisr2 register,
-+ * 					then perform a regular FMan reset and then restore MACs to their original state.
-+ *
-+ * @Param[in]     h_Fm - FM module descriptor
-+ *
-+ * @Return        None.
-+ */
-+void ResetOnInitErrata_A007273(t_Handle h_Fm)
-+{
-+	struct ccsr_guts __iomem *guts_regs = NULL;
-+	struct device_node *guts_node;
-+	u32 devdisr2, enableMacs;
-+
-+	/* Get guts registers */
-+	guts_node = of_find_matching_node(NULL, guts_device_ids);
-+	if (!guts_node) {
-+		pr_err("could not find GUTS node\n");
-+		return;
-+	}
-+	guts_regs = of_iomap(guts_node, 0);
-+	of_node_put(guts_node);
-+	if (!guts_regs) {
-+		pr_err("ioremap of GUTS node failed\n");
-+		return;
-+	}
-+
-+	/* Read current state */
-+	devdisr2 = ioread32be(&guts_regs->devdisr2);
-+
-+	if (FmGetId(h_Fm) == 0)
-+		enableMacs = devdisr2 & ~FMAN1_ALL_MACS_MASK;
-+	else
-+		enableMacs = devdisr2 & ~FMAN2_ALL_MACS_MASK;
-+
-+	/* Enable all MACs */
-+	iowrite32be(enableMacs, &guts_regs->devdisr2);
-+
-+	/* Perform standard FMan reset */
-+	FmReset(h_Fm);
-+
-+	/* Restore devdisr2 value */
-+	iowrite32be(devdisr2, &guts_regs->devdisr2);
-+
-+	iounmap(guts_regs);
-+}
-+#endif
-+
-+static t_Error InitFmDev(t_LnxWrpFmDev  *p_LnxWrpFmDev)
-+{
-+    const struct qe_firmware *fw;
-+
-+    if (!p_LnxWrpFmDev->active)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM not configured!!!"));
-+
-+    if ((p_LnxWrpFmDev->h_MuramDev = FM_MURAM_ConfigAndInit(p_LnxWrpFmDev->fmMuramBaseAddr, p_LnxWrpFmDev->fmMuramMemSize)) == NULL)
-+        RETURN_ERROR(MAJOR, E_INVALID_HANDLE, ("FM-MURAM!"));
-+
-+    /* Loading the fman-controller code */
-+    fw = FindFmanMicrocode();
-+
-+    if (!fw) {
-+        /* this forces the reuse of the current IRAM content */
-+        p_LnxWrpFmDev->fmDevSettings.param.firmware.size = 0;
-+        p_LnxWrpFmDev->fmDevSettings.param.firmware.p_Code = NULL;
-+    } else {
-+        p_LnxWrpFmDev->fmDevSettings.param.firmware.p_Code =
-+            (void *) fw + be32_to_cpu(fw->microcode[0].code_offset);
-+        p_LnxWrpFmDev->fmDevSettings.param.firmware.size =
-+            sizeof(u32) * be32_to_cpu(fw->microcode[0].count);
-+        DBG(INFO, ("Loading fman-controller code version %d.%d.%d",
-+                   fw->microcode[0].major,
-+                   fw->microcode[0].minor,
-+                   fw->microcode[0].revision));
-+    }
-+
-+#ifdef CONFIG_FMAN_ARM
-+	{ /* endianness adjustments: byteswap the ucode retrieved from the f/w blob */
-+		int i;
-+		int usz = p_LnxWrpFmDev->fmDevSettings.param.firmware.size;
-+		void * p_Code = p_LnxWrpFmDev->fmDevSettings.param.firmware.p_Code;
-+		u32 *dest = kzalloc(usz, GFP_KERNEL);
-+
-+		if (p_Code && dest)
-+		for(i=0; i < usz / 4; ++i)
-+			dest[i] = be32_to_cpu(((u32 *)p_Code)[i]);
-+
-+		p_LnxWrpFmDev->fmDevSettings.param.firmware.p_Code = dest;
-+	}
-+#endif
-+
-+    p_LnxWrpFmDev->fmDevSettings.param.h_FmMuram = p_LnxWrpFmDev->h_MuramDev;
-+
-+#if (DPAA_VERSION >= 11)
-+    if (p_LnxWrpFmDev->fmVspBaseAddr) {
-+        p_LnxWrpFmDev->fmDevSettings.param.vspBaseAddr = p_LnxWrpFmDev->fmVspBaseAddr;
-+        p_LnxWrpFmDev->fmDevSettings.param.partVSPBase = 0;
-+        p_LnxWrpFmDev->fmDevSettings.param.partNumOfVSPs = FM_VSP_MAX_NUM_OF_ENTRIES;
-+    }
-+#endif
-+
-+#ifdef CONFIG_FMAN_ARM
-+    p_LnxWrpFmDev->fmDevSettings.param.fmMacClkRatio = 1;
-+#else
-+    if(p_LnxWrpFmDev->fmDevSettings.param.fmId == 0)
-+        p_LnxWrpFmDev->fmDevSettings.param.fmMacClkRatio =
-+            !!(get_rcwsr(4) & 0x2); /* RCW[FM_MAC_RAT0] */
-+    else
-+        p_LnxWrpFmDev->fmDevSettings.param.fmMacClkRatio =
-+            !!(get_rcwsr(4) & 0x1); /* RCW[FM_MAC_RAT1] */
-+
-+    {   
-+    /* T4 Devices ClkRatio is always 1 regardless of RCW[FM_MAC_RAT1] */
-+        uint32_t svr;
-+        svr = mfspr(SPRN_SVR);
-+
-+        if ((svr & SVR_DEVICE_ID_MASK) == SVR_T4_DEVICE_ID)
-+            p_LnxWrpFmDev->fmDevSettings.param.fmMacClkRatio = 1;
-+    }
-+#endif /* CONFIG_FMAN_ARM */
-+
-+    if ((p_LnxWrpFmDev->h_Dev = FM_Config(&p_LnxWrpFmDev->fmDevSettings.param)) == NULL)
-+        RETURN_ERROR(MAJOR, E_INVALID_HANDLE, ("FM"));
-+
-+
-+    if (FM_ConfigResetOnInit(p_LnxWrpFmDev->h_Dev, TRUE) != E_OK)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM"));
-+
-+#ifndef CONFIG_FMAN_ARM
-+#ifdef FM_HANG_AT_RESET_MAC_CLK_DISABLED_ERRATA_FMAN_A007273
-+	if (FM_ConfigResetOnInitOverrideCallback(p_LnxWrpFmDev->h_Dev, ResetOnInitErrata_A007273) != E_OK)
-+		RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM"));
-+#endif /* FM_HANG_AT_RESET_MAC_CLK_DISABLED_ERRATA_FMAN_A007273 */
-+#endif /* CONFIG_FMAN_ARM */
-+
-+#ifdef CONFIG_FMAN_P1023
-+    if (FM_ConfigDmaAidOverride(p_LnxWrpFmDev->h_Dev, TRUE) != E_OK)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM"));
-+#endif
-+
-+
-+    CheckNConfigFmAdvArgs(p_LnxWrpFmDev);
-+
-+    if (FM_Init(p_LnxWrpFmDev->h_Dev) != E_OK)
-+        RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM"));
-+
-+    /* TODO: Why we mask these interrupts? */
-+    if (p_LnxWrpFmDev->err_irq == 0) {
-+        FM_SetException(p_LnxWrpFmDev->h_Dev, e_FM_EX_DMA_BUS_ERROR,FALSE);
-+        FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_DMA_READ_ECC,FALSE);
-+        FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_DMA_SYSTEM_WRITE_ECC,FALSE);
-+        FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_DMA_FM_WRITE_ECC,FALSE);
-+        FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_DMA_SINGLE_PORT_ECC, FALSE);
-+        FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_FPM_STALL_ON_TASKS , FALSE);
-+        FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_FPM_SINGLE_ECC, FALSE);
-+        FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_FPM_DOUBLE_ECC,FALSE);
-+        FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_QMI_SINGLE_ECC, FALSE);
-+        FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_QMI_DOUBLE_ECC,FALSE);
-+        FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_QMI_DEQ_FROM_UNKNOWN_PORTID,FALSE);
-+        FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_BMI_LIST_RAM_ECC,FALSE);
-+        FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_BMI_STORAGE_PROFILE_ECC, FALSE);
-+        FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_BMI_STATISTICS_RAM_ECC, FALSE);
-+        FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_BMI_DISPATCH_RAM_ECC, FALSE);
-+        FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_IRAM_ECC,FALSE);
-+        /* TODO: FmDisableRamsEcc assert for ramsEccOwners.
-+         * FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_MURAM_ECC,FALSE);*/
-+    }
-+
-+    if (p_LnxWrpFmDev->fmRtcBaseAddr)
-+    {
-+        t_FmRtcParams   fmRtcParam;
-+
-+        memset(&fmRtcParam, 0, sizeof(fmRtcParam));
-+        fmRtcParam.h_App = p_LnxWrpFmDev;
-+        fmRtcParam.h_Fm = p_LnxWrpFmDev->h_Dev;
-+        fmRtcParam.baseAddress = p_LnxWrpFmDev->fmRtcBaseAddr;
-+
-+        if(!(p_LnxWrpFmDev->h_RtcDev = FM_RTC_Config(&fmRtcParam)))
-+            RETURN_ERROR(MAJOR, E_INVALID_HANDLE, ("FM-RTC"));
-+
-+	if (FM_RTC_ConfigPeriod(p_LnxWrpFmDev->h_RtcDev, DPA_PTP_NOMINAL_FREQ_PERIOD_NS) != E_OK)
-+	    RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM-RTC"));
-+
-+        if (FM_RTC_Init(p_LnxWrpFmDev->h_RtcDev) != E_OK)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM-RTC"));
-+    }
-+
-+    return E_OK;
-+}
-+
-+/* TODO: to be moved back here */
-+extern void FreeFmPcdDev(t_LnxWrpFmDev  *p_LnxWrpFmDev);
-+
-+static void FreeFmDev(t_LnxWrpFmDev  *p_LnxWrpFmDev)
-+{
-+    if (!p_LnxWrpFmDev->active)
-+        return;
-+
-+    FreeFmPcdDev(p_LnxWrpFmDev);
-+
-+    if (p_LnxWrpFmDev->h_RtcDev)
-+	FM_RTC_Free(p_LnxWrpFmDev->h_RtcDev);
-+
-+    if (p_LnxWrpFmDev->h_Dev)
-+        FM_Free(p_LnxWrpFmDev->h_Dev);
-+
-+    if (p_LnxWrpFmDev->h_MuramDev)
-+        FM_MURAM_Free(p_LnxWrpFmDev->h_MuramDev);
-+
-+    if (p_LnxWrpFmDev->fmRtcBaseAddr)
-+    {
-+        SYS_UnregisterIoMap(p_LnxWrpFmDev->fmRtcBaseAddr);
-+        devm_iounmap(p_LnxWrpFmDev->dev, UINT_TO_PTR(p_LnxWrpFmDev->fmRtcBaseAddr));
-+        __devm_release_region(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->res, p_LnxWrpFmDev->fmRtcPhysBaseAddr, p_LnxWrpFmDev->fmRtcMemSize);
-+    }
-+    SYS_UnregisterIoMap(p_LnxWrpFmDev->fmMuramBaseAddr);
-+    devm_iounmap(p_LnxWrpFmDev->dev, UINT_TO_PTR(p_LnxWrpFmDev->fmMuramBaseAddr));
-+    __devm_release_region(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->res, p_LnxWrpFmDev->fmMuramPhysBaseAddr, p_LnxWrpFmDev->fmMuramMemSize);
-+    SYS_UnregisterIoMap(p_LnxWrpFmDev->fmBaseAddr);
-+    devm_iounmap(p_LnxWrpFmDev->dev, UINT_TO_PTR(p_LnxWrpFmDev->fmBaseAddr));
-+    devm_release_mem_region(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->fmPhysBaseAddr, p_LnxWrpFmDev->fmMemSize);
-+    if (p_LnxWrpFmDev->err_irq != 0) {
-+        devm_free_irq(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->err_irq, p_LnxWrpFmDev);
-+    }
-+
-+    devm_free_irq(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->irq, p_LnxWrpFmDev);
-+}
-+
-+/* FMan character device file operations */
-+extern struct file_operations fm_fops;
-+
-+static int /*__devinit*/ fm_probe(struct platform_device *of_dev)
-+{
-+    t_LnxWrpFmDev   *p_LnxWrpFmDev;
-+
-+    if ((p_LnxWrpFmDev = ReadFmDevTreeNode(of_dev)) == NULL)
-+        return -EIO;
-+    if (ConfigureFmDev(p_LnxWrpFmDev) != E_OK)
-+        return -EIO;
-+    if (InitFmDev(p_LnxWrpFmDev) != E_OK)
-+        return -EIO;
-+
-+    /* IOCTL ABI checking */
-+    LnxWrpPCDIOCTLEnumChecking();
-+    LnxWrpPCDIOCTLTypeChecking();
-+
-+    Sprint (p_LnxWrpFmDev->name, "%s%d", DEV_FM_NAME, p_LnxWrpFmDev->id);
-+
-+    /* Register to the /dev for IOCTL API */
-+    /* Register dynamically a new major number for the character device: */
-+    if ((p_LnxWrpFmDev->major = register_chrdev(0, p_LnxWrpFmDev->name, &fm_fops)) <= 0) {
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Failed to allocate a major number for device \"%s\"", p_LnxWrpFmDev->name));
-+        return -EIO;
-+    }
-+
-+    /* Creating classes for FM */
-+    DBG(TRACE ,("class_create fm_class"));
-+    p_LnxWrpFmDev->fm_class = class_create(THIS_MODULE, p_LnxWrpFmDev->name);
-+    if (IS_ERR(p_LnxWrpFmDev->fm_class)) {
-+        unregister_chrdev(p_LnxWrpFmDev->major, p_LnxWrpFmDev->name);
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("class_create error fm_class"));
-+        return -EIO;
-+    }
-+
-+    device_create(p_LnxWrpFmDev->fm_class, NULL, MKDEV(p_LnxWrpFmDev->major, DEV_FM_MINOR_BASE), NULL,
-+                  "fm%d", p_LnxWrpFmDev->id);
-+    device_create(p_LnxWrpFmDev->fm_class, NULL, MKDEV(p_LnxWrpFmDev->major, DEV_FM_PCD_MINOR_BASE), NULL,
-+                  "fm%d-pcd", p_LnxWrpFmDev->id);
-+    dev_set_drvdata(p_LnxWrpFmDev->dev, p_LnxWrpFmDev);
-+
-+   /* create sysfs entries for stats and regs */
-+    if ( fm_sysfs_create(p_LnxWrpFmDev->dev) !=0 )
-+    {
-+        FreeFmDev(p_LnxWrpFmDev);
-+        REPORT_ERROR(MAJOR, E_INVALID_STATE, ("Unable to create sysfs entry - fm!!!"));
-+        return -EIO;
-+    }
-+
-+#ifdef CONFIG_PM
-+    device_set_wakeup_capable(p_LnxWrpFmDev->dev, true);
-+#endif
-+
-+    DBG(TRACE, ("FM%d probed", p_LnxWrpFmDev->id));
-+
-+    return 0;
-+}
-+
-+static int fm_remove(struct platform_device *of_dev)
-+{
-+    t_LnxWrpFmDev   *p_LnxWrpFmDev;
-+    struct device   *dev;
-+
-+    dev = &of_dev->dev;
-+    p_LnxWrpFmDev = dev_get_drvdata(dev);
-+
-+    fm_sysfs_destroy(dev);
-+
-+    DBG(TRACE, ("destroy fm_class"));
-+    device_destroy(p_LnxWrpFmDev->fm_class, MKDEV(p_LnxWrpFmDev->major, DEV_FM_MINOR_BASE));
-+    device_destroy(p_LnxWrpFmDev->fm_class, MKDEV(p_LnxWrpFmDev->major, DEV_FM_PCD_MINOR_BASE));
-+    class_destroy(p_LnxWrpFmDev->fm_class);
-+
-+    /* Destroy chardev */
-+    unregister_chrdev(p_LnxWrpFmDev->major, p_LnxWrpFmDev->name);
-+
-+    FreeFmDev(p_LnxWrpFmDev);
-+
-+    DestroyFmDev(p_LnxWrpFmDev);
-+
-+    dev_set_drvdata(dev, NULL);
-+
-+    return 0;
-+}
-+
-+static const struct of_device_id fm_match[] = {
-+    {
-+        .compatible    = "fsl,fman"
-+    },
-+    {}
-+};
-+#ifndef MODULE
-+MODULE_DEVICE_TABLE(of, fm_match);
-+#endif /* !MODULE */
-+
-+#ifdef CONFIG_PM
-+
-+#define SCFG_FMCLKDPSLPCR_ADDR 0xFFE0FC00C
-+#define SCFG_FMCLKDPSLPCR_DS_VAL 0x48402000
-+#define SCFG_FMCLKDPSLPCR_NORMAL_VAL 0x00402000
-+
-+struct device *g_fm_dev;
-+
-+static int fm_soc_suspend(struct device *dev)
-+{
-+	int err = 0;
-+	uint32_t *fmclk;
-+	t_LnxWrpFmDev *p_LnxWrpFmDev = dev_get_drvdata(get_device(dev));
-+	g_fm_dev = dev;
-+	fmclk = ioremap(SCFG_FMCLKDPSLPCR_ADDR, 4);
-+	WRITE_UINT32(*fmclk, SCFG_FMCLKDPSLPCR_DS_VAL);
-+	if (p_LnxWrpFmDev->h_DsarRxPort)
-+	{
-+#ifdef CONFIG_FSL_QORIQ_PM
-+		device_set_wakeup_enable(p_LnxWrpFmDev->dev, 1);
-+#endif
-+		err = FM_PORT_EnterDsarFinal(p_LnxWrpFmDev->h_DsarRxPort,
-+			p_LnxWrpFmDev->h_DsarTxPort);
-+	}
-+	return err;
-+}
-+
-+static int fm_soc_resume(struct device *dev)
-+{
-+	t_LnxWrpFmDev *p_LnxWrpFmDev = dev_get_drvdata(get_device(dev));
-+	uint32_t *fmclk;
-+	fmclk = ioremap(SCFG_FMCLKDPSLPCR_ADDR, 4);
-+	WRITE_UINT32(*fmclk, SCFG_FMCLKDPSLPCR_NORMAL_VAL);
-+	if (p_LnxWrpFmDev->h_DsarRxPort)
-+	{
-+#ifdef CONFIG_FSL_QORIQ_PM
-+		device_set_wakeup_enable(p_LnxWrpFmDev->dev, 0);
-+#endif
-+		FM_PORT_ExitDsar(p_LnxWrpFmDev->h_DsarRxPort,
-+			p_LnxWrpFmDev->h_DsarTxPort);
-+		p_LnxWrpFmDev->h_DsarRxPort = 0;
-+		p_LnxWrpFmDev->h_DsarTxPort = 0;
-+	}
-+	return 0;
-+}
-+
-+static const struct dev_pm_ops fm_pm_ops = {
-+	.suspend = fm_soc_suspend,
-+	.resume = fm_soc_resume,
-+};
-+
-+#define FM_PM_OPS (&fm_pm_ops)
-+
-+#else /* CONFIG_PM */
-+
-+#define FM_PM_OPS NULL
-+
-+#endif /* CONFIG_PM */
-+
-+static struct platform_driver fm_driver = {
-+    .driver = {
-+        .name           = "fsl-fman",
-+        .of_match_table    = fm_match,
-+        .owner          = THIS_MODULE,
-+	.pm		= FM_PM_OPS,
-+    },
-+    .probe          = fm_probe,
-+    .remove         = fm_remove
-+};
-+
-+t_Handle LNXWRP_FM_Init(void)
-+{
-+    memset(&lnxWrpFm, 0, sizeof(lnxWrpFm));
-+    mutex_init(&lnxwrp_mutex);
-+
-+    /* Register to the DTB for basic FM API */
-+    platform_driver_register(&fm_driver);
-+
-+    return &lnxWrpFm;
-+}
-+
-+t_Error LNXWRP_FM_Free(t_Handle h_LnxWrpFm)
-+{
-+    platform_driver_unregister(&fm_driver);
-+    mutex_destroy(&lnxwrp_mutex);
-+
-+    return E_OK;
-+}
-+
-+
-+struct fm * fm_bind(struct device *fm_dev)
-+{
-+    return (struct fm *)(dev_get_drvdata(get_device(fm_dev)));
-+}
-+EXPORT_SYMBOL(fm_bind);
-+
-+void fm_unbind(struct fm *fm)
-+{
-+    t_LnxWrpFmDev       *p_LnxWrpFmDev = (t_LnxWrpFmDev*)fm;
-+
-+    put_device(p_LnxWrpFmDev->dev);
-+}
-+EXPORT_SYMBOL(fm_unbind);
-+
-+struct resource * fm_get_mem_region(struct fm *fm)
-+{
-+    t_LnxWrpFmDev       *p_LnxWrpFmDev = (t_LnxWrpFmDev*)fm;
-+
-+    return p_LnxWrpFmDev->res;
-+}
-+EXPORT_SYMBOL(fm_get_mem_region);
-+
-+void * fm_get_handle(struct fm *fm)
-+{
-+    t_LnxWrpFmDev       *p_LnxWrpFmDev = (t_LnxWrpFmDev*)fm;
-+
-+    return (void *)p_LnxWrpFmDev->h_Dev;
-+}
-+EXPORT_SYMBOL(fm_get_handle);
-+
-+void * fm_get_rtc_handle(struct fm *fm)
-+{
-+    t_LnxWrpFmDev       *p_LnxWrpFmDev = (t_LnxWrpFmDev*)fm;
-+
-+    return (void *)p_LnxWrpFmDev->h_RtcDev;
-+}
-+EXPORT_SYMBOL(fm_get_rtc_handle);
-+
-+struct fm_port * fm_port_bind (struct device *fm_port_dev)
-+{
-+    return (struct fm_port *)(dev_get_drvdata(get_device(fm_port_dev)));
-+}
-+EXPORT_SYMBOL(fm_port_bind);
-+
-+void fm_port_unbind(struct fm_port *port)
-+{
-+    t_LnxWrpFmPortDev   *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev*)port;
-+
-+    put_device(p_LnxWrpFmPortDev->dev);
-+}
-+EXPORT_SYMBOL(fm_port_unbind);
-+
-+void *fm_port_get_handle(const struct fm_port *port)
-+{
-+    t_LnxWrpFmPortDev   *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev*)port;
-+
-+    return (void *)p_LnxWrpFmPortDev->h_Dev;
-+}
-+EXPORT_SYMBOL(fm_port_get_handle);
-+
-+u64 *fm_port_get_buffer_time_stamp(const struct fm_port *port,
-+		const void *data)
-+{
-+	return FM_PORT_GetBufferTimeStamp(fm_port_get_handle(port),
-+					  (void *)data);
-+}
-+EXPORT_SYMBOL(fm_port_get_buffer_time_stamp);
-+
-+void fm_port_get_base_addr(const struct fm_port *port, uint64_t *base_addr)
-+{
-+    t_LnxWrpFmPortDev   *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *)port;
-+
-+    *base_addr = p_LnxWrpFmPortDev->settings.param.baseAddr;
-+}
-+EXPORT_SYMBOL(fm_port_get_base_addr);
-+
-+void fm_port_pcd_bind (struct fm_port *port, struct fm_port_pcd_param *params)
-+{
-+    t_LnxWrpFmPortDev   *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev*)port;
-+
-+    p_LnxWrpFmPortDev->pcd_owner_params.cba = params->cba;
-+    p_LnxWrpFmPortDev->pcd_owner_params.cbf = params->cbf;
-+    p_LnxWrpFmPortDev->pcd_owner_params.dev = params->dev;
-+}
-+EXPORT_SYMBOL(fm_port_pcd_bind);
-+
-+void fm_port_get_buff_layout_ext_params(struct fm_port *port, struct fm_port_params *params)
-+{
-+    t_LnxWrpFmPortDev   *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *)port;
-+    struct device_node  *fm_node, *port_node;
-+    const uint32_t       *uint32_prop;
-+    int                  lenp;
-+
-+    params->data_align = 0;
-+    params->manip_extra_space = 0;
-+
-+    fm_node = GetFmAdvArgsDevTreeNode(((t_LnxWrpFmDev *) p_LnxWrpFmPortDev->h_LnxWrpFmDev)->id);
-+    if (!fm_node) /* no advance parameters for FMan */
-+        return;
-+
-+    port_node = GetFmPortAdvArgsDevTreeNode(fm_node,
-+                                            p_LnxWrpFmPortDev->settings.param.portType,
-+                                            p_LnxWrpFmPortDev->settings.param.portId);
-+    if (!port_node) /* no advance parameters for FMan-Port */
-+        return;
-+
-+    uint32_prop = (uint32_t *)of_get_property(port_node, "buffer-layout", &lenp);
-+    if (uint32_prop) {
-+       if (WARN_ON(lenp != sizeof(uint32_t)*2))
-+            return;
-+
-+        params->manip_extra_space = (uint8_t)be32_to_cpu(uint32_prop[0]);
-+        params->data_align        = (uint16_t)be32_to_cpu(uint32_prop[1]);
-+    }
-+
-+    of_node_put(port_node);
-+    of_node_put(fm_node);
-+}
-+EXPORT_SYMBOL(fm_port_get_buff_layout_ext_params);
-+
-+uint16_t fm_get_tx_port_channel(struct fm_port *port)
-+{
-+    t_LnxWrpFmPortDev   *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev*)port;
-+
-+    return p_LnxWrpFmPortDev->txCh;
-+}
-+EXPORT_SYMBOL(fm_get_tx_port_channel);
-+
-+int fm_port_enable (struct fm_port *port)
-+{
-+    t_LnxWrpFmPortDev   *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev*)port;
-+    t_Error err = FM_PORT_Enable(p_LnxWrpFmPortDev->h_Dev);
-+
-+    return GET_ERROR_TYPE(err);
-+}
-+EXPORT_SYMBOL(fm_port_enable);
-+
-+int fm_port_disable(struct fm_port *port)
-+{
-+    t_LnxWrpFmPortDev   *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev*)port;
-+    t_Error err = FM_PORT_Disable(p_LnxWrpFmPortDev->h_Dev);
-+
-+    return GET_ERROR_TYPE(err);
-+}
-+EXPORT_SYMBOL(fm_port_disable);
-+
-+int fm_port_set_rate_limit(struct fm_port *port,
-+			uint16_t	max_burst_size,
-+			uint32_t	rate_limit)
-+{
-+	t_FmPortRateLimit param;
-+	t_LnxWrpFmPortDev   *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *)port;
-+	int err = 0;
-+
-+	param.maxBurstSize = max_burst_size;
-+	param.rateLimit = rate_limit;
-+	param.rateLimitDivider = 0;
-+
-+	err = FM_PORT_SetRateLimit(p_LnxWrpFmPortDev->h_Dev, &param);
-+	return err;
-+}
-+EXPORT_SYMBOL(fm_port_set_rate_limit);
-+
-+int fm_port_del_rate_limit(struct fm_port *port)
-+{
-+	t_LnxWrpFmPortDev   *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *)port;
-+
-+	FM_PORT_DeleteRateLimit(p_LnxWrpFmPortDev->h_Dev);
-+	return 0;
-+}
-+EXPORT_SYMBOL(fm_port_del_rate_limit);
-+
-+void FM_PORT_Dsar_DumpRegs(void);
-+int ar_showmem(struct file *file, const char __user *buffer,
-+		unsigned long count, void *data)
-+{
-+	FM_PORT_Dsar_DumpRegs();
-+	return 2;
-+}
-+
-+struct auto_res_tables_sizes *fm_port_get_autores_maxsize(
-+	struct fm_port *port)
-+{
-+	t_LnxWrpFmPortDev   *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *)port;
-+	return &p_LnxWrpFmPortDev->dsar_table_sizes;
-+}
-+EXPORT_SYMBOL(fm_port_get_autores_maxsize);
-+
-+int fm_port_enter_autores_for_deepsleep(struct fm_port *port,
-+	struct auto_res_port_params *params)
-+{
-+	t_LnxWrpFmPortDev   *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *)port;
-+	t_LnxWrpFmDev* p_LnxWrpFmDev = (t_LnxWrpFmDev*)p_LnxWrpFmPortDev->h_LnxWrpFmDev;
-+	p_LnxWrpFmDev->h_DsarRxPort = p_LnxWrpFmPortDev->h_Dev;
-+	p_LnxWrpFmDev->h_DsarTxPort = params->h_FmPortTx;
-+
-+		/*Register other under /proc/autoresponse */
-+    	if (WARN_ON(sizeof(t_FmPortDsarParams) != sizeof(struct auto_res_port_params)))
-+            return -EFAULT;
-+
-+	FM_PORT_EnterDsar(p_LnxWrpFmPortDev->h_Dev, (t_FmPortDsarParams*)params);
-+	return 0;
-+}
-+EXPORT_SYMBOL(fm_port_enter_autores_for_deepsleep);
-+
-+void fm_port_exit_auto_res_for_deep_sleep(struct fm_port *port_rx,
-+	struct fm_port *port_tx)
-+{
-+}
-+EXPORT_SYMBOL(fm_port_exit_auto_res_for_deep_sleep);
-+
-+int fm_port_get_autores_stats(struct fm_port *port,
-+	struct auto_res_port_stats *stats)
-+{
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *)port;
-+    	if (WARN_ON(sizeof(t_FmPortDsarStats) != sizeof(struct auto_res_port_stats)))
-+            return -EFAULT;
-+	return FM_PORT_GetDsarStats(p_LnxWrpFmPortDev->h_Dev, (t_FmPortDsarStats*)stats);
-+}
-+EXPORT_SYMBOL(fm_port_get_autores_stats);
-+
-+int fm_port_suspend(struct fm_port *port)
-+{
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *)port;
-+	if (!FM_PORT_IsInDsar(p_LnxWrpFmPortDev->h_Dev))
-+		return FM_PORT_Disable(p_LnxWrpFmPortDev->h_Dev);
-+	else
-+		return 0;
-+}
-+EXPORT_SYMBOL(fm_port_suspend);
-+
-+int fm_port_resume(struct fm_port *port)
-+{
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *)port;
-+	if (!FM_PORT_IsInDsar(p_LnxWrpFmPortDev->h_Dev))
-+		return FM_PORT_Enable(p_LnxWrpFmPortDev->h_Dev);
-+	else
-+		return 0;
-+}
-+EXPORT_SYMBOL(fm_port_resume);
-+
-+bool fm_port_is_in_auto_res_mode(struct fm_port *port)
-+{
-+	return FM_PORT_IsInDsar(port);
-+}
-+EXPORT_SYMBOL(fm_port_is_in_auto_res_mode);
-+
-+#ifdef CONFIG_FMAN_PFC
-+int fm_port_set_pfc_priorities_mapping_to_qman_wq(struct fm_port *port,
-+		uint8_t prio, uint8_t wq)
-+{
-+	t_LnxWrpFmPortDev   *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *)port;
-+	int err;
-+	int _errno;
-+
-+	err = FM_PORT_SetPfcPrioritiesMappingToQmanWQ(p_LnxWrpFmPortDev->h_Dev,
-+			prio, wq);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_PORT_SetPfcPrioritiesMappingToQmanWQ() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_port_set_pfc_priorities_mapping_to_qman_wq);
-+#endif
-+
-+int fm_mac_set_exception(struct fm_mac_dev *fm_mac_dev,
-+		e_FmMacExceptions exception, bool enable)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MAC_SetException(fm_mac_dev, exception, enable);
-+
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MAC_SetException() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_set_exception);
-+
-+int fm_mac_free(struct fm_mac_dev *fm_mac_dev)
-+{
-+	int err;
-+	int _error;
-+
-+	err = FM_MAC_Free(fm_mac_dev);
-+	_error = -GET_ERROR_TYPE(err);
-+
-+	if (unlikely(_error < 0))
-+		pr_err("FM_MAC_Free() = 0x%08x\n", err);
-+
-+	return _error;
-+}
-+EXPORT_SYMBOL(fm_mac_free);
-+
-+struct fm_mac_dev *fm_mac_config(t_FmMacParams *params)
-+{
-+	struct fm_mac_dev *fm_mac_dev;
-+
-+	fm_mac_dev = FM_MAC_Config(params);
-+	if (unlikely(fm_mac_dev == NULL))
-+		pr_err("FM_MAC_Config() failed\n");
-+
-+	return fm_mac_dev;
-+}
-+EXPORT_SYMBOL(fm_mac_config);
-+
-+int fm_mac_config_max_frame_length(struct fm_mac_dev *fm_mac_dev,
-+		int len)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MAC_ConfigMaxFrameLength(fm_mac_dev, len);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MAC_ConfigMaxFrameLength() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_config_max_frame_length);
-+
-+int fm_mac_config_pad_and_crc(struct fm_mac_dev *fm_mac_dev, bool enable)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MAC_ConfigPadAndCrc(fm_mac_dev, enable);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MAC_ConfigPadAndCrc() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_config_pad_and_crc);
-+
-+int fm_mac_config_half_duplex(struct fm_mac_dev *fm_mac_dev, bool enable)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MAC_ConfigHalfDuplex(fm_mac_dev, enable);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MAC_ConfigHalfDuplex() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_config_half_duplex);
-+
-+int fm_mac_config_reset_on_init(struct fm_mac_dev *fm_mac_dev, bool enable)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MAC_ConfigResetOnInit(fm_mac_dev, enable);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MAC_ConfigResetOnInit() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_config_reset_on_init);
-+
-+int fm_mac_init(struct fm_mac_dev *fm_mac_dev)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MAC_Init(fm_mac_dev);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MAC_Init() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_init);
-+
-+int fm_mac_get_version(struct fm_mac_dev *fm_mac_dev, uint32_t *version)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MAC_GetVesrion(fm_mac_dev, version);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MAC_GetVesrion() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_get_version);
-+
-+int fm_mac_enable(struct fm_mac_dev *fm_mac_dev)
-+{
-+	int	 _errno;
-+	t_Error	 err;
-+
-+	err = FM_MAC_Enable(fm_mac_dev, e_COMM_MODE_RX_AND_TX);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MAC_Enable() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_enable);
-+
-+int fm_mac_disable(struct fm_mac_dev *fm_mac_dev)
-+{
-+	int	 _errno;
-+	t_Error	 err;
-+
-+	err = FM_MAC_Disable(fm_mac_dev, e_COMM_MODE_RX_AND_TX);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MAC_Disable() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_disable);
-+
-+int fm_mac_resume(struct fm_mac_dev *fm_mac_dev)
-+{
-+        int      _errno;
-+        t_Error  err;
-+
-+        err = FM_MAC_Resume(fm_mac_dev);
-+        _errno = -GET_ERROR_TYPE(err);
-+        if (unlikely(_errno < 0))
-+                pr_err("FM_MAC_Resume() = 0x%08x\n", err);
-+
-+        return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_resume);
-+
-+int fm_mac_set_promiscuous(struct fm_mac_dev *fm_mac_dev,
-+		bool enable)
-+{
-+	int	_errno;
-+	t_Error	err;
-+
-+	err = FM_MAC_SetPromiscuous(fm_mac_dev, enable);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MAC_SetPromiscuous() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_set_promiscuous);
-+
-+int fm_mac_remove_hash_mac_addr(struct fm_mac_dev *fm_mac_dev,
-+		t_EnetAddr *mac_addr)
-+{
-+	int	_errno;
-+	t_Error	err;
-+
-+	err = FM_MAC_RemoveHashMacAddr(fm_mac_dev, mac_addr);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (_errno < 0) {
-+		pr_err("FM_MAC_RemoveHashMacAddr() = 0x%08x\n", err);
-+		return _errno;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(fm_mac_remove_hash_mac_addr);
-+
-+int fm_mac_add_hash_mac_addr(struct fm_mac_dev *fm_mac_dev,
-+		t_EnetAddr *mac_addr)
-+{
-+	int	_errno;
-+	t_Error	err;
-+
-+	err = FM_MAC_AddHashMacAddr(fm_mac_dev, mac_addr);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (_errno < 0) {
-+		pr_err("FM_MAC_AddHashMacAddr() = 0x%08x\n", err);
-+		return _errno;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(fm_mac_add_hash_mac_addr);
-+
-+int fm_mac_modify_mac_addr(struct fm_mac_dev *fm_mac_dev,
-+					 uint8_t *addr)
-+{
-+	int	_errno;
-+	t_Error err;
-+
-+	err = FM_MAC_ModifyMacAddr(fm_mac_dev, (t_EnetAddr *)addr);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (_errno < 0)
-+		pr_err("FM_MAC_ModifyMacAddr() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_modify_mac_addr);
-+
-+int fm_mac_adjust_link(struct fm_mac_dev *fm_mac_dev,
-+		bool link, int speed, bool duplex)
-+{
-+	int	 _errno;
-+	t_Error	 err;
-+
-+	if (!link) {
-+#if (DPAA_VERSION < 11)
-+		FM_MAC_RestartAutoneg(fm_mac_dev);
-+#endif
-+		return 0;
-+	}
-+
-+	err = FM_MAC_AdjustLink(fm_mac_dev, speed, duplex);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MAC_AdjustLink() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_adjust_link);
-+
-+int fm_mac_enable_1588_time_stamp(struct fm_mac_dev *fm_mac_dev)
-+{
-+	int			 _errno;
-+	t_Error			 err;
-+
-+	err = FM_MAC_Enable1588TimeStamp(fm_mac_dev);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MAC_Enable1588TimeStamp() = 0x%08x\n", err);
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_enable_1588_time_stamp);
-+
-+int fm_mac_disable_1588_time_stamp(struct fm_mac_dev *fm_mac_dev)
-+{
-+	int			 _errno;
-+	t_Error			 err;
-+
-+	err = FM_MAC_Disable1588TimeStamp(fm_mac_dev);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MAC_Disable1588TimeStamp() = 0x%08x\n", err);
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_disable_1588_time_stamp);
-+
-+int fm_mac_set_rx_pause_frames(
-+		struct fm_mac_dev *fm_mac_dev, bool en)
-+{
-+	int	_errno;
-+	t_Error err;
-+
-+	/* if rx pause is enabled, do NOT ignore pause frames */
-+	err = FM_MAC_SetRxIgnorePauseFrames(fm_mac_dev, !en);
-+
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (_errno < 0)
-+		pr_err("FM_MAC_SetRxIgnorePauseFrames() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_set_rx_pause_frames);
-+
-+#ifdef CONFIG_FMAN_PFC
-+int fm_mac_set_tx_pause_frames(struct fm_mac_dev *fm_mac_dev,
-+					     bool en)
-+{
-+	int	_errno, i;
-+	t_Error err;
-+
-+	if (en)
-+		for (i = 0; i < CONFIG_FMAN_PFC_COS_COUNT; i++) {
-+			err = FM_MAC_SetTxPauseFrames(fm_mac_dev,
-+					i, fsl_fm_pfc_quanta[i],
-+					FSL_FM_PAUSE_THRESH_DEFAULT);
-+			_errno = -GET_ERROR_TYPE(err);
-+			if (_errno < 0) {
-+				pr_err("FM_MAC_SetTxPauseFrames() = 0x%08x\n", err);
-+				return _errno;
-+			}
-+		}
-+	else
-+		for (i = 0; i < CONFIG_FMAN_PFC_COS_COUNT; i++) {
-+			err = FM_MAC_SetTxPauseFrames(fm_mac_dev,
-+					i, FSL_FM_PAUSE_TIME_DISABLE,
-+					FSL_FM_PAUSE_THRESH_DEFAULT);
-+			_errno = -GET_ERROR_TYPE(err);
-+			if (_errno < 0) {
-+				pr_err("FM_MAC_SetTxPauseFrames() = 0x%08x\n", err);
-+				return _errno;
-+			}
-+		}
-+
-+	return _errno;
-+}
-+#else
-+int fm_mac_set_tx_pause_frames(struct fm_mac_dev *fm_mac_dev,
-+					     bool en)
-+{
-+	int	_errno;
-+	t_Error err;
-+
-+	if (en)
-+		err = FM_MAC_SetTxAutoPauseFrames(fm_mac_dev,
-+				FSL_FM_PAUSE_TIME_ENABLE);
-+	else
-+		err = FM_MAC_SetTxAutoPauseFrames(fm_mac_dev,
-+				FSL_FM_PAUSE_TIME_DISABLE);
-+
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (_errno < 0)
-+		pr_err("FM_MAC_SetTxAutoPauseFrames() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+#endif
-+EXPORT_SYMBOL(fm_mac_set_tx_pause_frames);
-+
-+int fm_rtc_enable(struct fm *fm_dev)
-+{
-+	int			 _errno;
-+	t_Error			 err;
-+
-+	err = FM_RTC_Enable(fm_get_rtc_handle(fm_dev), 0);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_RTC_Enable = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_rtc_enable);
-+
-+int fm_rtc_disable(struct fm *fm_dev)
-+{
-+	int			 _errno;
-+	t_Error			 err;
-+
-+	err = FM_RTC_Disable(fm_get_rtc_handle(fm_dev));
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_RTC_Disable = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_rtc_disable);
-+
-+int fm_rtc_get_cnt(struct fm *fm_dev, uint64_t *ts)
-+{
-+	int _errno;
-+	t_Error	err;
-+
-+	err = FM_RTC_GetCurrentTime(fm_get_rtc_handle(fm_dev), ts);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_RTC_GetCurrentTime = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_rtc_get_cnt);
-+
-+int fm_rtc_set_cnt(struct fm *fm_dev, uint64_t ts)
-+{
-+	int _errno;
-+	t_Error	err;
-+
-+	err = FM_RTC_SetCurrentTime(fm_get_rtc_handle(fm_dev), ts);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_RTC_SetCurrentTime = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_rtc_set_cnt);
-+
-+int fm_rtc_get_drift(struct fm *fm_dev, uint32_t *drift)
-+{
-+	int _errno;
-+	t_Error	err;
-+
-+	err = FM_RTC_GetFreqCompensation(fm_get_rtc_handle(fm_dev),
-+			drift);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_RTC_GetFreqCompensation = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_rtc_get_drift);
-+
-+int fm_rtc_set_drift(struct fm *fm_dev, uint32_t drift)
-+{
-+	int _errno;
-+	t_Error	err;
-+
-+	err = FM_RTC_SetFreqCompensation(fm_get_rtc_handle(fm_dev),
-+			drift);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_RTC_SetFreqCompensation = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_rtc_set_drift);
-+
-+int fm_rtc_set_alarm(struct fm *fm_dev, uint32_t id,
-+		uint64_t time)
-+{
-+	t_FmRtcAlarmParams alarm;
-+	int _errno;
-+	t_Error	err;
-+
-+	alarm.alarmId = id;
-+	alarm.alarmTime = time;
-+	alarm.f_AlarmCallback = NULL;
-+	err = FM_RTC_SetAlarm(fm_get_rtc_handle(fm_dev),
-+			&alarm);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_RTC_SetAlarm = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_rtc_set_alarm);
-+
-+int fm_rtc_set_fiper(struct fm *fm_dev, uint32_t id,
-+		uint64_t fiper)
-+{
-+	t_FmRtcPeriodicPulseParams pp;
-+	int _errno;
-+	t_Error	err;
-+
-+	pp.periodicPulseId = id;
-+	pp.periodicPulsePeriod = fiper;
-+	pp.f_PeriodicPulseCallback = NULL;
-+	err = FM_RTC_SetPeriodicPulse(fm_get_rtc_handle(fm_dev), &pp);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_RTC_SetPeriodicPulse = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_rtc_set_fiper);
-+
-+#ifdef CONFIG_PTP_1588_CLOCK_DPAA
-+int fm_rtc_enable_interrupt(struct fm *fm_dev, uint32_t events)
-+{
-+	int _errno;
-+	t_Error	err;
-+
-+	err = FM_RTC_EnableInterrupt(fm_get_rtc_handle(fm_dev),
-+			events);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_RTC_EnableInterrupt = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_rtc_enable_interrupt);
-+
-+int fm_rtc_disable_interrupt(struct fm *fm_dev, uint32_t events)
-+{
-+	int _errno;
-+	t_Error	err;
-+
-+	err = FM_RTC_DisableInterrupt(fm_get_rtc_handle(fm_dev),
-+			events);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_RTC_DisableInterrupt = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_rtc_disable_interrupt);
-+#endif
-+
-+int fm_mac_set_wol(struct fm_port *port, struct fm_mac_dev *fm_mac_dev, bool en)
-+{
-+	int _errno;
-+	t_Error err;
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *)port;
-+
-+	/* Do not set WoL on AR ports */
-+	if (FM_PORT_IsInDsar(p_LnxWrpFmPortDev->h_Dev)) {
-+		printk(KERN_WARNING "Port is AutoResponse enabled! WoL will not be set on this port!\n");
-+		return 0;
-+	}
-+
-+	err = FM_MAC_SetWakeOnLan(fm_mac_dev, en);
-+
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (_errno < 0)
-+		pr_err("FM_MAC_SetWakeOnLan() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_mac_set_wol);
-+
-+void fm_mutex_lock(void)
-+{
-+    mutex_lock(&lnxwrp_mutex);
-+}
-+EXPORT_SYMBOL(fm_mutex_lock);
-+
-+void fm_mutex_unlock(void)
-+{
-+    mutex_unlock(&lnxwrp_mutex);
-+}
-+EXPORT_SYMBOL(fm_mutex_unlock);
-+
-+/*Macsec wrapper functions*/
-+struct fm_macsec_dev *fm_macsec_config(struct fm_macsec_params *fm_params)
-+{
-+	struct fm_macsec_dev *fm_macsec_dev;
-+
-+	fm_macsec_dev = FM_MACSEC_Config((t_FmMacsecParams *)fm_params);
-+	if (unlikely(fm_macsec_dev == NULL))
-+		pr_err("FM_MACSEC_Config() failed\n");
-+
-+	return fm_macsec_dev;
-+}
-+EXPORT_SYMBOL(fm_macsec_config);
-+
-+int fm_macsec_init(struct fm_macsec_dev *fm_macsec_dev)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_Init(fm_macsec_dev);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_Init() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_init);
-+
-+int fm_macsec_free(struct fm_macsec_dev *fm_macsec_dev)
-+{
-+	int err;
-+	int _error;
-+
-+	err = FM_MACSEC_Free(fm_macsec_dev);
-+	_error = -GET_ERROR_TYPE(err);
-+
-+	if (unlikely(_error < 0))
-+		pr_err("FM_MACSEC_Free() = 0x%08x\n", err);
-+
-+	return _error;
-+}
-+EXPORT_SYMBOL(fm_macsec_free);
-+
-+int fm_macsec_config_unknown_sci_frame_treatment(struct fm_macsec_dev
-+				*fm_macsec_dev,
-+				fm_macsec_unknown_sci_frame_treatment treat_mode)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_ConfigUnknownSciFrameTreatment(fm_macsec_dev,
-+		treat_mode);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_ConfigUnknownSciFrameTreatmen() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_config_unknown_sci_frame_treatment);
-+
-+int fm_macsec_config_invalid_tags_frame_treatment(struct fm_macsec_dev *fm_macsec_dev,
-+				bool deliver_uncontrolled)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_ConfigInvalidTagsFrameTreatment(fm_macsec_dev,
-+						deliver_uncontrolled);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MAC_ConfigMaxFrameLength() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_config_invalid_tags_frame_treatment);
-+
-+int fm_macsec_config_kay_frame_treatment(struct fm_macsec_dev *fm_macsec_dev,
-+				bool discard_uncontrolled)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_ConfigEncryptWithNoChangedTextFrameTreatment(fm_macsec_dev,
-+						discard_uncontrolled);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_ConfigEncryptWithNoChangedTextFrameTreatmen() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_config_kay_frame_treatment);
-+
-+int fm_macsec_config_untag_frame_treatment(struct fm_macsec_dev *fm_macsec_dev,
-+				    fm_macsec_untag_frame_treatment treat_mode)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_ConfigUntagFrameTreatment(fm_macsec_dev, treat_mode);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_ConfigUntagFrameTreatment() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_config_untag_frame_treatment);
-+
-+int fm_macsec_config_pn_exhaustion_threshold(struct fm_macsec_dev *fm_macsec_dev,
-+					uint32_t pn_exh_thr)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_ConfigPnExhaustionThreshold(fm_macsec_dev, pn_exh_thr);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_ConfigPnExhaustionThreshold() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_config_pn_exhaustion_threshold);
-+
-+int fm_macsec_config_keys_unreadable(struct fm_macsec_dev *fm_macsec_dev)
-+{
-+	int err;
-+	int _errno;
-+
-+	err =  FM_MACSEC_ConfigKeysUnreadable(fm_macsec_dev);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_ConfigKeysUnreadable() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_config_keys_unreadable);
-+
-+int fm_macsec_config_sectag_without_sci(struct fm_macsec_dev *fm_macsec_dev)
-+{
-+	int err;
-+	int _errno;
-+
-+	err =  FM_MACSEC_ConfigSectagWithoutSCI(fm_macsec_dev);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_ConfigSectagWithoutSCI() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_config_sectag_without_sci);
-+
-+int fm_macsec_config_exception(struct fm_macsec_dev *fm_macsec_dev,
-+			    fm_macsec_exception exception, bool enable)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_ConfigException(fm_macsec_dev, exception, enable);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_ConfigException() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_config_exception);
-+
-+int fm_macsec_get_revision(struct fm_macsec_dev *fm_macsec_dev,
-+			    int *macsec_revision)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_GetRevision(fm_macsec_dev, macsec_revision);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_GetRevision() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_get_revision);
-+
-+int fm_macsec_enable(struct fm_macsec_dev *fm_macsec_dev)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_Enable(fm_macsec_dev);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_Enable() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_enable);
-+
-+int fm_macsec_disable(struct fm_macsec_dev *fm_macsec_dev)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_Disable(fm_macsec_dev);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_Disable() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_disable);
-+
-+int fm_macsec_set_exception(struct fm_macsec_dev *fm_macsec_dev,
-+			fm_macsec_exception exception, bool enable)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SetException(fm_macsec_dev, exception, enable);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SetException() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_set_exception);
-+
-+/* Macsec SECY wrapper API */
-+struct fm_macsec_secy_dev *fm_macsec_secy_config(struct fm_macsec_secy_params *secy_params)
-+{
-+	struct fm_macsec_secy_dev *fm_macsec_secy;
-+
-+	fm_macsec_secy = FM_MACSEC_SECY_Config((t_FmMacsecSecYParams *)secy_params);
-+	if (unlikely(fm_macsec_secy < 0))
-+		pr_err("FM_MACSEC_SECY_Config() failed\n");
-+
-+	return fm_macsec_secy;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_config);
-+
-+int fm_macsec_secy_init(struct fm_macsec_secy_dev *fm_macsec_secy_dev)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_Init(fm_macsec_secy_dev);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_Init() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_init);
-+
-+int fm_macsec_secy_free(struct fm_macsec_secy_dev *fm_macsec_secy_dev)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_Free(fm_macsec_secy_dev);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_Free() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_free);
-+
-+int fm_macsec_secy_config_sci_insertion_mode(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				fm_macsec_sci_insertion_mode sci_insertion_mode)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_ConfigSciInsertionMode(fm_macsec_secy_dev,
-+					sci_insertion_mode);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_ConfigSciInsertionMode() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_config_sci_insertion_mode);
-+
-+int fm_macsec_secy_config_protect_frames(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				bool protect_frames)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_ConfigProtectFrames(fm_macsec_secy_dev,
-+						protect_frames);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_ConfigProtectFrames() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_config_protect_frames);
-+
-+int fm_macsec_secy_config_replay_window(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				bool replay_protect, uint32_t replay_window)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_ConfigReplayWindow(fm_macsec_secy_dev,
-+						replay_protect, replay_window);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_ConfigReplayWindow() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_config_replay_window);
-+
-+int fm_macsec_secy_config_validation_mode(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				fm_macsec_valid_frame_behavior validate_frames)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_ConfigValidationMode(fm_macsec_secy_dev,
-+						    validate_frames);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_ConfigValidationMode() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_config_validation_mode);
-+
-+int fm_macsec_secy_config_confidentiality(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				bool confidentiality_enable,
-+				uint32_t confidentiality_offset)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_ConfigConfidentiality(fm_macsec_secy_dev,
-+						    confidentiality_enable,
-+						    confidentiality_offset);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_ConfigConfidentiality() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_config_confidentiality);
-+
-+int fm_macsec_secy_config_point_to_point(struct fm_macsec_secy_dev *fm_macsec_secy_dev)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_ConfigPointToPoint(fm_macsec_secy_dev);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_ConfigPointToPoint() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_config_point_to_point);
-+
-+int fm_macsec_secy_config_exception(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				    fm_macsec_secy_exception exception,
-+				    bool enable)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_ConfigException(fm_macsec_secy_dev, exception,
-+					    enable);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_ConfigException() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_config_exception);
-+
-+int fm_macsec_secy_config_event(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				    fm_macsec_secy_event event,
-+				    bool enable)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_ConfigEvent(fm_macsec_secy_dev, event, enable);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_ConfigEvent() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_config_event);
-+
-+struct rx_sc_dev *fm_macsec_secy_create_rxsc(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				struct fm_macsec_secy_sc_params  *params)
-+{
-+	struct rx_sc_dev *rx_sc_dev;
-+
-+	rx_sc_dev = FM_MACSEC_SECY_CreateRxSc(fm_macsec_secy_dev, (t_FmMacsecSecYSCParams *)params);
-+	if (unlikely(rx_sc_dev == NULL))
-+		pr_err("FM_MACSEC_SECY_CreateRxSc() failed\n");
-+
-+	return rx_sc_dev;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_create_rxsc);
-+
-+int fm_macsec_secy_delete_rxsc(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				struct rx_sc_dev *sc)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_DeleteRxSc(fm_macsec_secy_dev, sc);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_DeleteRxSc() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_delete_rxsc);
-+
-+int fm_macsec_secy_create_rx_sa(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				struct rx_sc_dev *sc, macsec_an_t an,
-+				uint32_t lowest_pn, macsec_sa_key_t key)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_CreateRxSa(fm_macsec_secy_dev, sc, an,
-+					lowest_pn, key);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_CreateRxSa() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_create_rx_sa);
-+
-+int fm_macsec_secy_delete_rx_sa(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				struct rx_sc_dev *sc, macsec_an_t an)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_DeleteRxSa(fm_macsec_secy_dev, sc, an);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_DeleteRxSa() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_delete_rx_sa);
-+
-+int fm_macsec_secy_rxsa_enable_receive(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					struct rx_sc_dev *sc,
-+					macsec_an_t an)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_RxSaEnableReceive(fm_macsec_secy_dev, sc, an);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_RxSaEnableReceive() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_rxsa_enable_receive);
-+
-+int fm_macsec_secy_rxsa_disable_receive(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					struct rx_sc_dev *sc,
-+					macsec_an_t an)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_RxSaDisableReceive(fm_macsec_secy_dev, sc, an);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_RxSaDisableReceive() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_rxsa_disable_receive);
-+
-+int fm_macsec_secy_rxsa_update_next_pn(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					struct rx_sc_dev *sc,
-+					macsec_an_t an, uint32_t updt_next_pn)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_RxSaUpdateNextPn(fm_macsec_secy_dev, sc, an,
-+						updt_next_pn);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_RxSaUpdateNextPn() = 0x%08x\n", err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_rxsa_update_next_pn);
-+
-+int fm_macsec_secy_rxsa_update_lowest_pn(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					struct rx_sc_dev *sc,
-+					macsec_an_t an, uint32_t updt_lowest_pn)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_RxSaUpdateLowestPn(fm_macsec_secy_dev, sc, an,
-+						updt_lowest_pn);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_RxSaUpdateLowestPn() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_rxsa_update_lowest_pn);
-+
-+int fm_macsec_secy_rxsa_modify_key(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					struct rx_sc_dev *sc,
-+					macsec_an_t an, macsec_sa_key_t key)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_RxSaModifyKey(fm_macsec_secy_dev, sc, an, key);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_RxSaModifyKey() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_rxsa_modify_key);
-+
-+int fm_macsec_secy_create_tx_sa(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				macsec_an_t an, macsec_sa_key_t key)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_CreateTxSa(fm_macsec_secy_dev, an, key);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_CreateTxSa() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_create_tx_sa);
-+
-+int fm_macsec_secy_delete_tx_sa(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				macsec_an_t an)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_DeleteTxSa(fm_macsec_secy_dev, an);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_DeleteTxSa() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_delete_tx_sa);
-+
-+int fm_macsec_secy_txsa_modify_key(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					macsec_an_t next_active_an,
-+					macsec_sa_key_t key)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_TxSaModifyKey(fm_macsec_secy_dev, next_active_an,
-+					    key);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_TxSaModifyKey() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_txsa_modify_key);
-+
-+int fm_macsec_secy_txsa_set_active(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					macsec_an_t an)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_TxSaSetActive(fm_macsec_secy_dev, an);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_TxSaSetActive() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_txsa_set_active);
-+
-+int fm_macsec_secy_txsa_get_active(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+					macsec_an_t *p_an)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_TxSaGetActive(fm_macsec_secy_dev, p_an);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_TxSaGetActive() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_txsa_get_active);
-+
-+int fm_macsec_secy_get_rxsc_phys_id(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				struct rx_sc_dev *sc, uint32_t *sc_phys_id)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_GetRxScPhysId(fm_macsec_secy_dev, sc, sc_phys_id);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_GetRxScPhysId() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_get_rxsc_phys_id);
-+
-+int fm_macsec_secy_get_txsc_phys_id(struct fm_macsec_secy_dev *fm_macsec_secy_dev,
-+				    uint32_t *sc_phys_id)
-+{
-+	int err;
-+	int _errno;
-+
-+	err = FM_MACSEC_SECY_GetTxScPhysId(fm_macsec_secy_dev, sc_phys_id);
-+	_errno = -GET_ERROR_TYPE(err);
-+	if (unlikely(_errno < 0))
-+		pr_err("FM_MACSEC_SECY_GetTxScPhysId() = 0x%08x\n",
-+			err);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(fm_macsec_secy_get_txsc_phys_id);
-+
-+static t_Handle h_FmLnxWrp;
-+
-+static int __init __cold fm_load (void)
-+{
-+    if ((h_FmLnxWrp = LNXWRP_FM_Init()) == NULL)
-+    {
-+        printk("Failed to init FM wrapper!\n");
-+        return -ENODEV;
-+    }
-+
-+	printk(KERN_CRIT "Freescale FM module," \
-+		" FMD API version %d.%d.%d\n",
-+		FMD_API_VERSION_MAJOR,
-+		FMD_API_VERSION_MINOR,
-+		FMD_API_VERSION_RESPIN);
-+    return 0;
-+}
-+
-+static void __exit __cold fm_unload (void)
-+{
-+    if (h_FmLnxWrp)
-+        LNXWRP_FM_Free(h_FmLnxWrp);
-+}
-+
-+module_init (fm_load);
-+module_exit (fm_unload);
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.h
-@@ -0,0 +1,294 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/*
-+ @File          lnxwrp_fm.h
-+
-+ @Author        Shlomi Gridish
-+
-+ @Description   FM Linux wrapper functions.
-+
-+*/
-+
-+#ifndef __LNXWRP_FM_H__
-+#define __LNXWRP_FM_H__
-+
-+#include <linux/fsl_qman.h> /* struct qman_fq */
-+
-+#include "std_ext.h"
-+#include "error_ext.h"
-+#include "list_ext.h"
-+
-+#include "lnxwrp_fm_ext.h"
-+
-+#define FM_MAX_NUM_OF_ADV_SETTINGS          10
-+
-+#define LNXWRP_FM_NUM_OF_SHARED_PROFILES    16
-+
-+#if defined(CONFIG_FMAN_DISABLE_OH_TO_REUSE_RESOURCES)
-+#define FM_10G_OPENDMA_MIN_TRESHOLD 8 /* 10g minimum treshold if only HC is enabled and no OH port enabled */
-+#define FM_OPENDMA_RX_TX_RAPORT 2 /* RX = 2*TX */
-+#else
-+#define FM_10G_OPENDMA_MIN_TRESHOLD 7 /* 10g minimum treshold if 7 OH ports are enabled */
-+#define FM_OPENDMA_RX_TX_RAPORT 1 /* RX = TX */
-+#endif
-+#define FM_DEFAULT_TX10G_OPENDMA 8 /* default TX 10g open dmas */
-+#define FM_DEFAULT_RX10G_OPENDMA 8 /* default RX 10g open dmas */
-+
-+#define FRAG_MANIP_SPACE 128
-+#define FRAG_DATA_ALIGN 64
-+
-+#ifndef CONFIG_FSL_FM_MAX_FRAME_SIZE
-+#define CONFIG_FSL_FM_MAX_FRAME_SIZE 0
-+#endif
-+
-+#ifndef CONFIG_FSL_FM_RX_EXTRA_HEADROOM
-+#define CONFIG_FSL_FM_RX_EXTRA_HEADROOM       16
-+#endif
-+
-+typedef enum {
-+    e_NO_PCD = 0,
-+    e_FM_PCD_3_TUPLE
-+} e_LnxWrpFmPortPcdDefUseCase;
-+
-+
-+typedef struct t_FmTestFq {
-+    struct qman_fq      fq_base;
-+    t_Handle            h_Arg;
-+} t_FmTestFq;
-+
-+typedef struct {
-+    uint8_t                     id; /* sw port id, see SW_PORT_ID_TO_HW_PORT_ID() in fm_common.h */
-+    int                         minor;
-+    char                        name[20];
-+    bool                        active;
-+    uint64_t                    phys_baseAddr;
-+    uint64_t                    baseAddr;               /* Port's *virtual* address */
-+    uint32_t                    memSize;
-+    t_WrpFmPortDevSettings      settings;
-+    t_FmExtPools                opExtPools;
-+    uint8_t                     totalNumOfSchemes;
-+    uint8_t                     schemesBase;
-+    uint8_t                     numOfSchemesUsed;
-+    uint32_t                    pcdBaseQ;
-+    uint16_t                    pcdNumOfQs;
-+    struct fm_port_pcd_param    pcd_owner_params;
-+    e_LnxWrpFmPortPcdDefUseCase defPcd;
-+    t_Handle                    h_DefNetEnv;
-+    t_Handle                    h_Schemes[FM_PCD_KG_NUM_OF_SCHEMES];
-+    t_FmBufferPrefixContent     buffPrefixContent;
-+    t_Handle                    h_Dev;
-+    t_Handle                    h_DfltVsp;
-+    t_Handle                    h_LnxWrpFmDev;
-+    uint16_t                    txCh;
-+    struct device               *dev;
-+    struct device_attribute     *dev_attr_stats;
-+    struct device_attribute     *dev_attr_regs;
-+    struct device_attribute     *dev_attr_bmi_regs;
-+    struct device_attribute     *dev_attr_qmi_regs;
-+#if (DPAA_VERSION >= 11)
-+    struct device_attribute     *dev_attr_ipv4_opt;
-+#endif
-+    struct device_attribute     *dev_attr_dsar_regs;
-+    struct device_attribute     *dev_attr_dsar_mem;
-+    struct auto_res_tables_sizes dsar_table_sizes;
-+} t_LnxWrpFmPortDev;
-+
-+typedef struct {
-+    uint8_t                     id;
-+    bool                        active;
-+    uint64_t                    baseAddr;
-+    uint32_t                    memSize;
-+    t_WrpFmMacDevSettings       settings;
-+    t_Handle                    h_Dev;
-+    t_Handle                    h_LnxWrpFmDev;
-+} t_LnxWrpFmMacDev;
-+
-+/* information about all active ports for an FMan.
-+ * !Some ports may be disabled by u-boot, thus will not be available */
-+struct fm_active_ports {
-+    uint32_t num_oh_ports;
-+    uint32_t num_tx_ports;
-+    uint32_t num_rx_ports;
-+    uint32_t num_tx25_ports;
-+    uint32_t num_rx25_ports;
-+    uint32_t num_tx10_ports;
-+    uint32_t num_rx10_ports;
-+};
-+
-+/* FMan resources precalculated at fm probe based
-+ * on available FMan port. */
-+struct fm_resource_settings {
-+    /* buffers - fifo sizes */
-+    uint32_t tx1g_num_buffers;
-+    uint32_t rx1g_num_buffers;
-+    uint32_t tx2g5_num_buffers; /* Not supported yet by LLD */
-+    uint32_t rx2g5_num_buffers; /* Not supported yet by LLD */
-+    uint32_t tx10g_num_buffers;
-+    uint32_t rx10g_num_buffers;
-+    uint32_t oh_num_buffers;
-+    uint32_t shared_ext_buffers;
-+
-+    /* open DMAs */
-+    uint32_t tx_1g_dmas;
-+    uint32_t rx_1g_dmas;
-+    uint32_t tx_2g5_dmas; /* Not supported yet by LLD */
-+    uint32_t rx_2g5_dmas; /* Not supported yet by LLD */
-+    uint32_t tx_10g_dmas;
-+    uint32_t rx_10g_dmas;
-+    uint32_t oh_dmas;
-+    uint32_t shared_ext_open_dma;
-+
-+    /* Tnums */
-+    uint32_t tx_1g_tnums;
-+    uint32_t rx_1g_tnums;
-+    uint32_t tx_2g5_tnums; /* Not supported yet by LLD */
-+    uint32_t rx_2g5_tnums; /* Not supported yet by LLD */
-+    uint32_t tx_10g_tnums;
-+    uint32_t rx_10g_tnums;
-+    uint32_t oh_tnums;
-+    uint32_t shared_ext_tnums;
-+};
-+
-+typedef struct {
-+    uint8_t                     id;
-+    char                        name[10];
-+    bool                        active;
-+    bool                        pcdActive;
-+    bool                        prsActive;
-+    bool                        kgActive;
-+    bool                        ccActive;
-+    bool                        plcrActive;
-+    e_LnxWrpFmPortPcdDefUseCase defPcd;
-+    uint32_t                    usedSchemes;
-+    uint8_t                     totalNumOfSharedSchemes;
-+    uint8_t                     sharedSchemesBase;
-+    uint8_t                     numOfSchemesUsed;
-+    uint8_t                     defNetEnvId;
-+    uint64_t                    fmPhysBaseAddr;
-+    uint64_t                    fmBaseAddr;
-+    uint32_t                    fmMemSize;
-+    uint64_t                    fmMuramPhysBaseAddr;
-+    uint64_t                    fmMuramBaseAddr;
-+    uint32_t                    fmMuramMemSize;
-+    uint64_t                    fmRtcPhysBaseAddr;
-+    uint64_t                    fmRtcBaseAddr;
-+    uint32_t                    fmRtcMemSize;
-+    uint64_t                    fmVspPhysBaseAddr;
-+    uint64_t                    fmVspBaseAddr;
-+    uint32_t                    fmVspMemSize;
-+    int                         irq;
-+    int                         err_irq;
-+    t_WrpFmDevSettings          fmDevSettings;
-+    t_WrpFmPcdDevSettings       fmPcdDevSettings;
-+    t_Handle                    h_Dev;
-+    uint16_t                    hcCh;
-+
-+    t_Handle                    h_MuramDev;
-+    t_Handle                    h_PcdDev;
-+    t_Handle                    h_RtcDev;
-+
-+    t_Handle			h_DsarRxPort;
-+    t_Handle			h_DsarTxPort;
-+
-+    t_LnxWrpFmPortDev           hcPort;
-+    t_LnxWrpFmPortDev           opPorts[FM_MAX_NUM_OF_OH_PORTS-1];
-+    t_LnxWrpFmPortDev           rxPorts[FM_MAX_NUM_OF_RX_PORTS];
-+    t_LnxWrpFmPortDev           txPorts[FM_MAX_NUM_OF_TX_PORTS];
-+    t_LnxWrpFmMacDev            macs[FM_MAX_NUM_OF_MACS];
-+    struct fm_active_ports      fm_active_ports_info;
-+    struct fm_resource_settings fm_resource_settings_info;
-+
-+    struct device               *dev;
-+    struct resource             *res;
-+    int                         major;
-+    struct class                *fm_class;
-+    struct device_attribute     *dev_attr_stats;
-+    struct device_attribute     *dev_attr_regs;
-+    struct device_attribute     *dev_attr_risc_load;
-+
-+    struct device_attribute     *dev_pcd_attr_stats;
-+    struct device_attribute     *dev_plcr_attr_regs;
-+    struct device_attribute     *dev_prs_attr_regs;
-+    struct device_attribute     *dev_fm_fpm_attr_regs;
-+    struct device_attribute     *dev_fm_kg_attr_regs;
-+    struct device_attribute     *dev_fm_kg_pe_attr_regs;
-+    struct device_attribute     *dev_attr_muram_free_size;
-+    struct device_attribute     *dev_attr_fm_ctrl_code_ver;
-+
-+
-+    struct qman_fq              *hc_tx_conf_fq, *hc_tx_err_fq, *hc_tx_fq;
-+} t_LnxWrpFmDev;
-+
-+typedef struct {
-+    t_LnxWrpFmDev   *p_FmDevs[INTG_MAX_NUM_OF_FM];
-+} t_LnxWrpFm;
-+#define LNXWRP_FM_OBJECT(ptr)   LIST_OBJECT(ptr, t_LnxWrpFm, fms[((t_LnxWrpFmDev *)ptr)->id])
-+
-+
-+t_Error  LnxwrpFmIOCTL(t_LnxWrpFmDev *p_LnxWrpFmDev, unsigned int cmd, unsigned long arg, bool compat);
-+t_Error  LnxwrpFmPortIOCTL(t_LnxWrpFmPortDev *p_LnxWrpFmPortDev, unsigned int cmd, unsigned long arg, bool compat);
-+
-+
-+#if 0
-+static __inline__ t_Error AllocSchemesForPort(t_LnxWrpFmDev *p_LnxWrpFmDev, uint8_t numSchemes, uint8_t *p_BaseSchemeNum)
-+{
-+    uint32_t    schemeMask;
-+    uint8_t     i;
-+
-+    if (!numSchemes)
-+        RETURN_ERROR(MINOR, E_INVALID_VALUE, NO_MSG);
-+
-+    schemeMask = 0x80000000;
-+    *p_BaseSchemeNum = 0xff;
-+
-+    for (i=0; schemeMask && numSchemes; schemeMask>>=1, i++)
-+        if ((p_LnxWrpFmDev->usedSchemes & schemeMask) == 0)
-+        {
-+            p_LnxWrpFmDev->usedSchemes |= schemeMask;
-+            numSchemes--;
-+            if (*p_BaseSchemeNum==0xff)
-+                *p_BaseSchemeNum = i;
-+        }
-+        else if (*p_BaseSchemeNum!=0xff)
-+            RETURN_ERROR(MINOR, E_INVALID_STATE, ("Fragmentation on schemes array!!!"));
-+
-+    if (numSchemes)
-+        RETURN_ERROR(MINOR, E_FULL, ("schemes!!!"));
-+    return E_OK;
-+}
-+#endif
-+
-+void LnxWrpPCDIOCTLTypeChecking(void);
-+void LnxWrpPCDIOCTLEnumChecking(void);
-+
-+#endif /* __LNXWRP_FM_H__ */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm_port.c
-@@ -0,0 +1,1480 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/*
-+ @File          lnxwrp_fm_port.c
-+
-+ @Description   FMD wrapper - FMan port functions.
-+
-+*/
-+
-+#include <linux/version.h>
-+#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
-+#define MODVERSIONS
-+#endif
-+#ifdef MODVERSIONS
-+#include <config/modversions.h>
-+#endif /* MODVERSIONS */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_address.h>
-+#include <linux/cdev.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+#ifndef CONFIG_FMAN_ARM
-+#include <linux/fsl/svr.h>
-+#endif
-+#include <linux/io.h>
-+
-+#include "sprint_ext.h"
-+#include "fm_common.h"
-+#include "lnxwrp_fsl_fman.h"
-+#include "fm_port_ext.h"
-+#if (DPAA_VERSION >= 11)
-+#include "fm_vsp_ext.h"
-+#endif /* DPAA_VERSION >= 11 */
-+#include "fm_ioctls.h"
-+#include "lnxwrp_resources.h"
-+#include "lnxwrp_sysfs_fm_port.h"
-+
-+#define __ERR_MODULE__  MODULE_FM
-+
-+extern struct device_node *GetFmAdvArgsDevTreeNode (uint8_t fmIndx);
-+
-+/* TODO: duplicated, see lnxwrp_fm.c */
-+#define ADD_ADV_CONFIG_NO_RET(_func, _param)\
-+do {\
-+	if (i < max) {\
-+		p_Entry = &p_Entrys[i];\
-+		p_Entry->p_Function = _func;\
-+		_param\
-+		i++;\
-+	} else {\
-+		REPORT_ERROR(MAJOR, E_INVALID_VALUE,\
-+		("Number of advanced-configuration entries exceeded"));\
-+	} \
-+} while (0)
-+
-+#ifndef CONFIG_FMAN_ARM
-+#define IS_T1023_T1024	(SVR_SOC_VER(mfspr(SPRN_SVR)) == SVR_T1024 || \
-+			SVR_SOC_VER(mfspr(SPRN_SVR)) == SVR_T1023)
-+#endif
-+
-+static volatile int hcFrmRcv/* = 0 */;
-+static spinlock_t lock;
-+
-+static enum qman_cb_dqrr_result qm_tx_conf_dqrr_cb(struct qman_portal *portal,
-+						   struct qman_fq *fq,
-+						   const struct qm_dqrr_entry
-+						   *dq)
-+{
-+	t_LnxWrpFmDev *p_LnxWrpFmDev = ((t_FmTestFq *) fq)->h_Arg;
-+	unsigned long flags;
-+
-+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
-+{
-+	/* extract the HC frame address */
-+	uint32_t *hcf_va = XX_PhysToVirt(qm_fd_addr((struct qm_fd *)&dq->fd));
-+	int hcf_l = ((struct qm_fd *)&dq->fd)->length20;
-+	int i;
-+
-+	/* 32b byteswap of all data in the HC Frame */
-+	for(i = 0; i < hcf_l / 4; ++i)
-+		hcf_va[i] =
-+			___constant_swab32(hcf_va[i]);
-+}
-+#endif
-+	FM_PCD_HcTxConf(p_LnxWrpFmDev->h_PcdDev, (t_DpaaFD *)&dq->fd);
-+	spin_lock_irqsave(&lock, flags);
-+	hcFrmRcv--;
-+	spin_unlock_irqrestore(&lock, flags);
-+
-+	return qman_cb_dqrr_consume;
-+}
-+
-+static enum qman_cb_dqrr_result qm_tx_dqrr_cb(struct qman_portal *portal,
-+					      struct qman_fq *fq,
-+					      const struct qm_dqrr_entry *dq)
-+{
-+	WARN(1, "FMD: failure at %s:%d/%s()!\n", __FILE__, __LINE__,
-+	     __func__);
-+	return qman_cb_dqrr_consume;
-+}
-+
-+static void qm_err_cb(struct qman_portal *portal,
-+		      struct qman_fq *fq, const struct qm_mr_entry *msg)
-+{
-+	WARN(1, "FMD: failure at %s:%d/%s()!\n", __FILE__, __LINE__,
-+	     __func__);
-+}
-+
-+static struct qman_fq *FqAlloc(t_LnxWrpFmDev * p_LnxWrpFmDev,
-+			       uint32_t fqid,
-+			       uint32_t flags, uint16_t channel, uint8_t wq)
-+{
-+	int _errno;
-+	struct qman_fq *fq = NULL;
-+	t_FmTestFq *p_FmtFq;
-+	struct qm_mcc_initfq initfq;
-+
-+	p_FmtFq = (t_FmTestFq *) XX_Malloc(sizeof(t_FmTestFq));
-+	if (!p_FmtFq) {
-+		REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FQ obj!!!"));
-+		return NULL;
-+	}
-+
-+	p_FmtFq->fq_base.cb.dqrr = ((flags & QMAN_FQ_FLAG_NO_ENQUEUE)
-+			? qm_tx_conf_dqrr_cb
-+			: qm_tx_dqrr_cb);
-+	p_FmtFq->fq_base.cb.ern = qm_err_cb;
-+	/* p_FmtFq->fq_base.cb.fqs = qm_err_cb; */
-+	/* qm_err_cb wrongly called when the FQ is parked */
-+	p_FmtFq->fq_base.cb.fqs = NULL;
-+	p_FmtFq->h_Arg = (t_Handle) p_LnxWrpFmDev;
-+	if (fqid == 0) {
-+		flags |= QMAN_FQ_FLAG_DYNAMIC_FQID;
-+		flags &= ~QMAN_FQ_FLAG_NO_MODIFY;
-+	} else {
-+		flags &= ~QMAN_FQ_FLAG_DYNAMIC_FQID;
-+	}
-+
-+	if (qman_create_fq(fqid, flags, &p_FmtFq->fq_base)) {
-+		REPORT_ERROR(MAJOR, E_NO_MEMORY, ("FQ obj - qman_new_fq!!!"));
-+		XX_Free(p_FmtFq);
-+		return NULL;
-+	}
-+	fq = &p_FmtFq->fq_base;
-+
-+	if (!(flags & QMAN_FQ_FLAG_NO_MODIFY)) {
-+		initfq.we_mask = QM_INITFQ_WE_DESTWQ;
-+		initfq.fqd.dest.channel = channel;
-+		initfq.fqd.dest.wq = wq;
-+
-+		_errno = qman_init_fq(fq, QMAN_INITFQ_FLAG_SCHED, &initfq);
-+		if (unlikely(_errno < 0)) {
-+			REPORT_ERROR(MAJOR, E_NO_MEMORY,
-+				     ("FQ obj - qman_init_fq!!!"));
-+			qman_destroy_fq(fq, 0);
-+			XX_Free(p_FmtFq);
-+			return NULL;
-+		}
-+	}
-+
-+	DBG(TRACE,
-+	    ("fqid %d, flags 0x%08x, channel %d, wq %d", qman_fq_fqid(fq),
-+	     flags, channel, wq));
-+
-+	return fq;
-+}
-+
-+static void FqFree(struct qman_fq *fq)
-+{
-+	int _errno;
-+
-+	_errno = qman_retire_fq(fq, NULL);
-+	if (unlikely(_errno < 0))
-+		printk(KERN_WARNING "qman_retire_fq(%u) = %d\n", qman_fq_fqid(fq), _errno);
-+
-+	_errno = qman_oos_fq(fq);
-+	if (unlikely(_errno < 0))
-+		printk(KERN_WARNING "qman_oos_fq(%u) = %d\n", qman_fq_fqid(fq), _errno);
-+
-+	qman_destroy_fq(fq, 0);
-+	XX_Free((t_FmTestFq *) fq);
-+}
-+
-+static t_Error QmEnqueueCB(t_Handle h_Arg, void *p_Fd)
-+{
-+	t_LnxWrpFmDev *p_LnxWrpFmDev = (t_LnxWrpFmDev *) h_Arg;
-+	int _errno, timeout = 1000000;
-+	unsigned long flags;
-+
-+	ASSERT_COND(p_LnxWrpFmDev);
-+
-+	spin_lock_irqsave(&lock, flags);
-+	hcFrmRcv++;
-+	spin_unlock_irqrestore(&lock, flags);
-+
-+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
-+{
-+	/* extract the HC frame address */
-+	uint32_t *hcf_va = XX_PhysToVirt(qm_fd_addr((struct qm_fd *) p_Fd));
-+	int hcf_l = ((struct qm_fd *)p_Fd)->length20;
-+	int i;
-+
-+	/* 32b byteswap of all data in the HC Frame */
-+	for(i = 0; i < hcf_l / 4; ++i)
-+		hcf_va[i] =
-+			___constant_swab32(hcf_va[i]);
-+}
-+#endif
-+
-+	_errno = qman_enqueue(p_LnxWrpFmDev->hc_tx_fq, (struct qm_fd *) p_Fd,
-+			      0);
-+	if (_errno)
-+		RETURN_ERROR(MINOR, E_INVALID_STATE,
-+			     ("qman_enqueue() failed"));
-+
-+	while (hcFrmRcv && --timeout) {
-+		udelay(1);
-+		cpu_relax();
-+	}
-+	if (timeout == 0) {
-+		dump_stack();
-+		RETURN_ERROR(MINOR, E_WRITE_FAILED,
-+			     ("timeout waiting for Tx confirmation"));
-+		return E_WRITE_FAILED;
-+	}
-+
-+	return E_OK;
-+}
-+
-+static t_LnxWrpFmPortDev *ReadFmPortDevTreeNode(struct platform_device
-+						*of_dev)
-+{
-+	t_LnxWrpFmDev *p_LnxWrpFmDev;
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev;
-+	struct device_node *fm_node, *port_node;
-+	struct resource res;
-+	const uint32_t *uint32_prop;
-+	int _errno = 0, lenp;
-+	uint32_t tmp_prop;
-+
-+#ifdef CONFIG_FMAN_P1023
-+	static unsigned char have_oh_port/* = 0 */;
-+#endif
-+
-+	port_node = of_node_get(of_dev->dev.of_node);
-+
-+	/* Get the FM node */
-+	fm_node = of_get_parent(port_node);
-+	if (unlikely(fm_node == NULL)) {
-+		REPORT_ERROR(MAJOR, E_NO_DEVICE,
-+			     ("of_get_parent() = %d", _errno));
-+		return NULL;
-+	}
-+
-+	p_LnxWrpFmDev =
-+		dev_get_drvdata(&of_find_device_by_node(fm_node)->dev);
-+	of_node_put(fm_node);
-+
-+	/* if fm_probe() failed, no point in going further with port probing */
-+	if (p_LnxWrpFmDev == NULL)
-+		return NULL;
-+
-+	uint32_prop =
-+		(uint32_t *) of_get_property(port_node, "cell-index", &lenp);
-+	if (unlikely(uint32_prop == NULL)) {
-+		REPORT_ERROR(MAJOR, E_INVALID_VALUE,
-+			     ("of_get_property(%s, cell-index) failed",
-+			      port_node->full_name));
-+		return NULL;
-+	}
-+	tmp_prop = be32_to_cpu(*uint32_prop);
-+	if (WARN_ON(lenp != sizeof(uint32_t)))
-+		return NULL;
-+	if (of_device_is_compatible(port_node, "fsl,fman-port-oh")) {
-+		if (unlikely(tmp_prop >= FM_MAX_NUM_OF_OH_PORTS)) {
-+			REPORT_ERROR(MAJOR, E_INVALID_VALUE,
-+				     ("of_get_property(%s, cell-index) failed",
-+				      port_node->full_name));
-+			return NULL;
-+		}
-+
-+#ifdef CONFIG_FMAN_P1023
-+		/* Beware, this can be done when there is only
-+		   one FMan to be initialized */
-+		if (!have_oh_port) {
-+			have_oh_port = 1; /* first OP/HC port
-+					     is used for host command */
-+#else
-+		/* Here it is hardcoded the use of the OH port 1
-+		   (with cell-index 0) */
-+		if (tmp_prop == 0) {
-+#endif
-+			p_LnxWrpFmPortDev = &p_LnxWrpFmDev->hcPort;
-+			p_LnxWrpFmPortDev->id = 0;
-+			/*
-+			p_LnxWrpFmPortDev->id = *uint32_prop-1;
-+			p_LnxWrpFmPortDev->id = *uint32_prop;
-+			*/
-+			p_LnxWrpFmPortDev->settings.param.portType =
-+				e_FM_PORT_TYPE_OH_HOST_COMMAND;
-+		} else {
-+			p_LnxWrpFmPortDev =
-+				&p_LnxWrpFmDev->opPorts[tmp_prop - 1];
-+			p_LnxWrpFmPortDev->id = tmp_prop- 1;
-+			p_LnxWrpFmPortDev->settings.param.portType =
-+				e_FM_PORT_TYPE_OH_OFFLINE_PARSING;
-+		}
-+		p_LnxWrpFmPortDev->settings.param.portId = tmp_prop;
-+
-+		uint32_prop =
-+			(uint32_t *) of_get_property(port_node,
-+						     "fsl,qman-channel-id",
-+						     &lenp);
-+		if (uint32_prop == NULL) {
-+						/*
-+ REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("missing fsl,qman-channel-id"));
-+ */
-+			XX_Print("FM warning: missing fsl,qman-channel-id"
-+					" for OH port.\n");
-+			return NULL;
-+		}
-+		tmp_prop = be32_to_cpu(*uint32_prop);
-+		if (WARN_ON(lenp != sizeof(uint32_t)))
-+			return NULL;
-+		p_LnxWrpFmPortDev->txCh = tmp_prop;
-+
-+		p_LnxWrpFmPortDev->settings.param.specificParams.nonRxParams.
-+			qmChannel = p_LnxWrpFmPortDev->txCh;
-+	} else if (of_device_is_compatible(port_node, "fsl,fman-port-1g-tx")) {
-+		tmp_prop -= 0x28;
-+		if (unlikely(tmp_prop >= FM_MAX_NUM_OF_1G_TX_PORTS)) {
-+			REPORT_ERROR(MAJOR, E_INVALID_VALUE,
-+					("of_get_property(%s, cell-index) failed",
-+					 port_node->full_name));
-+			return NULL;
-+		}
-+		p_LnxWrpFmPortDev = &p_LnxWrpFmDev->txPorts[tmp_prop];
-+
-+		p_LnxWrpFmPortDev->id = tmp_prop;
-+		p_LnxWrpFmPortDev->settings.param.portId =
-+			p_LnxWrpFmPortDev->id;
-+		p_LnxWrpFmPortDev->settings.param.portType = e_FM_PORT_TYPE_TX;
-+
-+		uint32_prop = (uint32_t *) of_get_property(port_node,
-+				"fsl,qman-channel-id", &lenp);
-+		if (uint32_prop == NULL) {
-+			REPORT_ERROR(MAJOR, E_INVALID_VALUE,
-+					("missing fsl,qman-channel-id"));
-+			return NULL;
-+		}
-+		tmp_prop = be32_to_cpu(*uint32_prop);
-+		if (WARN_ON(lenp != sizeof(uint32_t)))
-+			return NULL;
-+		p_LnxWrpFmPortDev->txCh = tmp_prop;
-+		p_LnxWrpFmPortDev->
-+			settings.param.specificParams.nonRxParams.qmChannel =
-+			p_LnxWrpFmPortDev->txCh;
-+	} else if (of_device_is_compatible(port_node, "fsl,fman-port-10g-tx")) {
-+		tmp_prop -= 0x30;
-+		if (unlikely(tmp_prop>= FM_MAX_NUM_OF_10G_TX_PORTS)) {
-+			REPORT_ERROR(MAJOR, E_INVALID_VALUE,
-+					("of_get_property(%s, cell-index) failed",
-+					 port_node->full_name));
-+			return NULL;
-+		}
-+		p_LnxWrpFmPortDev = &p_LnxWrpFmDev->txPorts[tmp_prop +
-+			FM_MAX_NUM_OF_1G_TX_PORTS];
-+#ifndef CONFIG_FMAN_ARM
-+		if (IS_T1023_T1024)
-+			p_LnxWrpFmPortDev = &p_LnxWrpFmDev->txPorts[*uint32_prop];
-+#endif
-+
-+		p_LnxWrpFmPortDev->id = tmp_prop;
-+		p_LnxWrpFmPortDev->settings.param.portId =
-+			p_LnxWrpFmPortDev->id;
-+		p_LnxWrpFmPortDev->settings.param.portType =
-+			e_FM_PORT_TYPE_TX_10G;
-+		uint32_prop = (uint32_t *) of_get_property(port_node,
-+				"fsl,qman-channel-id", &lenp);
-+		if (uint32_prop == NULL) {
-+			REPORT_ERROR(MAJOR, E_INVALID_VALUE,
-+					("missing fsl,qman-channel-id"));
-+			return NULL;
-+		}
-+		tmp_prop = be32_to_cpu(*uint32_prop);
-+		if (WARN_ON(lenp != sizeof(uint32_t)))
-+			return NULL;
-+		p_LnxWrpFmPortDev->txCh = tmp_prop;
-+		p_LnxWrpFmPortDev->settings.param.specificParams.nonRxParams.
-+			qmChannel = p_LnxWrpFmPortDev->txCh;
-+	} else if (of_device_is_compatible(port_node, "fsl,fman-port-1g-rx")) {
-+		tmp_prop -= 0x08;
-+		if (unlikely(tmp_prop >= FM_MAX_NUM_OF_1G_RX_PORTS)) {
-+			REPORT_ERROR(MAJOR, E_INVALID_VALUE,
-+					("of_get_property(%s, cell-index) failed",
-+					 port_node->full_name));
-+			return NULL;
-+		}
-+		p_LnxWrpFmPortDev = &p_LnxWrpFmDev->rxPorts[tmp_prop];
-+
-+		p_LnxWrpFmPortDev->id = tmp_prop;
-+		p_LnxWrpFmPortDev->settings.param.portId =
-+			p_LnxWrpFmPortDev->id;
-+		p_LnxWrpFmPortDev->settings.param.portType = e_FM_PORT_TYPE_RX;
-+		if (p_LnxWrpFmDev->pcdActive)
-+			p_LnxWrpFmPortDev->defPcd = p_LnxWrpFmDev->defPcd;
-+	} else if (of_device_is_compatible(port_node, "fsl,fman-port-10g-rx")) {
-+		tmp_prop -= 0x10;
-+		if (unlikely(tmp_prop >= FM_MAX_NUM_OF_10G_RX_PORTS)) {
-+			REPORT_ERROR(MAJOR, E_INVALID_VALUE,
-+					("of_get_property(%s, cell-index) failed",
-+					 port_node->full_name));
-+			return NULL;
-+		}
-+		p_LnxWrpFmPortDev = &p_LnxWrpFmDev->rxPorts[tmp_prop +
-+			FM_MAX_NUM_OF_1G_RX_PORTS];
-+
-+#ifndef CONFIG_FMAN_ARM
-+		if (IS_T1023_T1024)
-+			p_LnxWrpFmPortDev = &p_LnxWrpFmDev->rxPorts[*uint32_prop];
-+#endif
-+
-+		p_LnxWrpFmPortDev->id = tmp_prop;
-+		p_LnxWrpFmPortDev->settings.param.portId =
-+			p_LnxWrpFmPortDev->id;
-+		p_LnxWrpFmPortDev->settings.param.portType =
-+			e_FM_PORT_TYPE_RX_10G;
-+		if (p_LnxWrpFmDev->pcdActive)
-+			p_LnxWrpFmPortDev->defPcd = p_LnxWrpFmDev->defPcd;
-+	} else {
-+		REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("Illegal port type"));
-+		return NULL;
-+	}
-+
-+	_errno = of_address_to_resource(port_node, 0, &res);
-+	if (unlikely(_errno < 0)) {
-+		REPORT_ERROR(MAJOR, E_INVALID_VALUE,
-+			     ("of_address_to_resource() = %d", _errno));
-+		return NULL;
-+	}
-+
-+	p_LnxWrpFmPortDev->dev = &of_dev->dev;
-+	p_LnxWrpFmPortDev->baseAddr = 0;
-+	p_LnxWrpFmPortDev->phys_baseAddr = res.start;
-+	p_LnxWrpFmPortDev->memSize = res.end + 1 - res.start;
-+	p_LnxWrpFmPortDev->settings.param.h_Fm = p_LnxWrpFmDev->h_Dev;
-+	p_LnxWrpFmPortDev->h_LnxWrpFmDev = (t_Handle) p_LnxWrpFmDev;
-+
-+	of_node_put(port_node);
-+
-+	p_LnxWrpFmPortDev->active = TRUE;
-+
-+#if defined(CONFIG_FMAN_DISABLE_OH_TO_REUSE_RESOURCES)
-+	/* for performance mode no OH port available. */
-+	if (p_LnxWrpFmPortDev->settings.param.portType ==
-+	    e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+		p_LnxWrpFmPortDev->active = FALSE;
-+#endif
-+
-+	return p_LnxWrpFmPortDev;
-+}
-+
-+struct device_node * GetFmPortAdvArgsDevTreeNode (struct device_node *fm_node,
-+                                                         e_FmPortType       portType,
-+                                                         uint8_t            portId)
-+{
-+    struct device_node  *port_node;
-+    const uint32_t      *uint32_prop;
-+    int                 lenp;
-+    char                *portTypeString;
-+    uint32_t            tmp_prop;
-+
-+    switch(portType) {
-+        case e_FM_PORT_TYPE_OH_OFFLINE_PARSING:
-+            portTypeString = "fsl,fman-port-op-extended-args";
-+            break;
-+        case e_FM_PORT_TYPE_TX:
-+            portTypeString = "fsl,fman-port-1g-tx-extended-args";
-+            break;
-+        case e_FM_PORT_TYPE_TX_10G:
-+            portTypeString = "fsl,fman-port-10g-tx-extended-args";
-+            break;
-+        case e_FM_PORT_TYPE_RX:
-+            portTypeString = "fsl,fman-port-1g-rx-extended-args";
-+            break;
-+        case e_FM_PORT_TYPE_RX_10G:
-+            portTypeString = "fsl,fman-port-10g-rx-extended-args";
-+            break;
-+        default:
-+            return NULL;
-+    }
-+
-+    for_each_child_of_node(fm_node, port_node) {
-+        uint32_prop = (uint32_t *)of_get_property(port_node, "cell-index", &lenp);
-+        if (unlikely(uint32_prop == NULL)) {
-+            REPORT_ERROR(MAJOR, E_INVALID_VALUE,
-+                         ("of_get_property(%s, cell-index) failed",
-+                          port_node->full_name));
-+            return NULL;
-+        }
-+        tmp_prop = be32_to_cpu(*uint32_prop);
-+        if (WARN_ON(lenp != sizeof(uint32_t)))
-+            return NULL;
-+    	if ((portId == tmp_prop) &&
-+    	    (of_device_is_compatible(port_node, portTypeString))) {
-+            return port_node;
-+    	}
-+    }
-+
-+    return NULL;
-+}
-+
-+static t_Error CheckNConfigFmPortAdvArgs (t_LnxWrpFmPortDev *p_LnxWrpFmPortDev)
-+{
-+    struct device_node      *fm_node, *port_node;
-+    t_Error                 err;
-+    t_FmPortRsrc            portRsrc;
-+    const uint32_t          *uint32_prop;
-+    /*const char              *str_prop;*/
-+    int                     lenp;
-+#ifdef CONFIG_FMAN_PFC
-+    uint8_t i, id, num_pools;
-+    t_FmBufPoolDepletion poolDepletion;
-+
-+    if (p_LnxWrpFmPortDev->settings.param.portType == e_FM_PORT_TYPE_RX ||
-+            p_LnxWrpFmPortDev->settings.param.portType == e_FM_PORT_TYPE_RX_10G) {
-+        memset(&poolDepletion, 0, sizeof(t_FmBufPoolDepletion));
-+        poolDepletion.singlePoolModeEnable = true;
-+        num_pools = p_LnxWrpFmPortDev->settings.param.specificParams.rxParams.
-+                extBufPools.numOfPoolsUsed;
-+        for (i = 0; i < num_pools; i++) {
-+            id = p_LnxWrpFmPortDev->settings.param.specificParams.rxParams.
-+                    extBufPools.extBufPool[i].id;
-+            poolDepletion.poolsToConsiderForSingleMode[id] = true;
-+        }
-+
-+        for (i = 0; i < CONFIG_FMAN_PFC_COS_COUNT; i++)
-+            poolDepletion.pfcPrioritiesEn[i] = true;
-+
-+        err = FM_PORT_ConfigPoolDepletion(p_LnxWrpFmPortDev->h_Dev,
-+                &poolDepletion);
-+        if (err != E_OK)
-+            RETURN_ERROR(MAJOR, err, ("FM_PORT_ConfigPoolDepletion() failed"));
-+    }
-+#endif
-+
-+    fm_node = GetFmAdvArgsDevTreeNode(((t_LnxWrpFmDev *) p_LnxWrpFmPortDev->h_LnxWrpFmDev)->id);
-+    if (!fm_node) /* no advance parameters for FMan */
-+        return E_OK;
-+
-+    port_node = GetFmPortAdvArgsDevTreeNode(fm_node,
-+                                            p_LnxWrpFmPortDev->settings.param.portType,
-+                                            p_LnxWrpFmPortDev->settings.param.portId);
-+    if (!port_node) /* no advance parameters for FMan-Port */
-+        return E_OK;
-+
-+    uint32_prop = (uint32_t *)of_get_property(port_node, "num-tnums", &lenp);
-+    if (uint32_prop) {
-+    	if (WARN_ON(lenp != sizeof(uint32_t)*2))
-+            RETURN_ERROR(MINOR, E_INVALID_VALUE, NO_MSG);
-+
-+        portRsrc.num   = be32_to_cpu(uint32_prop[0]);
-+        portRsrc.extra = be32_to_cpu(uint32_prop[1]);
-+
-+        if ((err = FM_PORT_ConfigNumOfTasks(p_LnxWrpFmPortDev->h_Dev,
-+                                            &portRsrc)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+
-+    uint32_prop = (uint32_t *)of_get_property(port_node, "num-dmas", &lenp);
-+    if (uint32_prop) {
-+    	if (WARN_ON(lenp != sizeof(uint32_t)*2))
-+            RETURN_ERROR(MINOR, E_INVALID_VALUE, NO_MSG);
-+
-+        portRsrc.num   = be32_to_cpu(uint32_prop[0]);
-+        portRsrc.extra = be32_to_cpu(uint32_prop[1]);
-+
-+        if ((err = FM_PORT_ConfigNumOfOpenDmas(p_LnxWrpFmPortDev->h_Dev,
-+                                            &portRsrc)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+
-+    uint32_prop = (uint32_t *)of_get_property(port_node, "fifo-size", &lenp);
-+    if (uint32_prop) {
-+    	if (WARN_ON(lenp != sizeof(uint32_t)*2))
-+            RETURN_ERROR(MINOR, E_INVALID_VALUE, NO_MSG);
-+
-+        portRsrc.num   = be32_to_cpu(uint32_prop[0]);
-+        portRsrc.extra = be32_to_cpu(uint32_prop[1]);
-+
-+        if ((err = FM_PORT_ConfigSizeOfFifo(p_LnxWrpFmPortDev->h_Dev,
-+                                            &portRsrc)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+
-+    uint32_prop = (uint32_t *)of_get_property(port_node, "errors-to-discard", &lenp);
-+    if (uint32_prop) {
-+    	if (WARN_ON(lenp != sizeof(uint32_t)))
-+            RETURN_ERROR(MINOR, E_INVALID_VALUE, NO_MSG);
-+        if ((err = FM_PORT_ConfigErrorsToDiscard(p_LnxWrpFmPortDev->h_Dev,
-+                                                 be32_to_cpu(uint32_prop[0]))) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+
-+    uint32_prop = (uint32_t *)of_get_property(port_node, "ar-tables-sizes",
-+	&lenp);
-+    if (uint32_prop) {
-+    
-+    	if (WARN_ON(lenp != sizeof(uint32_t)*8))
-+            RETURN_ERROR(MINOR, E_INVALID_VALUE, NO_MSG);
-+    	if (WARN_ON(p_LnxWrpFmPortDev->settings.param.portType !=
-+		e_FM_PORT_TYPE_RX) &&
-+		(p_LnxWrpFmPortDev->settings.param.portType !=
-+		e_FM_PORT_TYPE_RX_10G))
-+            RETURN_ERROR(MINOR, E_INVALID_VALUE,
-+		("Auto Response is an Rx port atribute."));
-+
-+        memset(&p_LnxWrpFmPortDev->dsar_table_sizes, 0, sizeof(struct auto_res_tables_sizes));
-+
-+        p_LnxWrpFmPortDev->dsar_table_sizes.max_num_of_arp_entries        =
-+		(uint16_t)be32_to_cpu(uint32_prop[0]);
-+        p_LnxWrpFmPortDev->dsar_table_sizes.max_num_of_echo_ipv4_entries  =
-+		(uint16_t)be32_to_cpu(uint32_prop[1]);
-+        p_LnxWrpFmPortDev->dsar_table_sizes.max_num_of_ndp_entries        =
-+		(uint16_t)be32_to_cpu(uint32_prop[2]);
-+        p_LnxWrpFmPortDev->dsar_table_sizes.max_num_of_echo_ipv6_entries  =
-+		(uint16_t)be32_to_cpu(uint32_prop[3]);
-+        p_LnxWrpFmPortDev->dsar_table_sizes.max_num_of_snmp_ipv4_entries   =
-+		(uint16_t)be32_to_cpu(uint32_prop[4]);
-+        p_LnxWrpFmPortDev->dsar_table_sizes.max_num_of_snmp_ipv6_entries   =
-+		(uint16_t)be32_to_cpu(uint32_prop[5]);
-+        p_LnxWrpFmPortDev->dsar_table_sizes.max_num_of_snmp_oid_entries   =
-+		(uint16_t)be32_to_cpu(uint32_prop[6]);
-+        p_LnxWrpFmPortDev->dsar_table_sizes.max_num_of_snmp_char          =
-+		(uint16_t)be32_to_cpu(uint32_prop[7]);
-+
-+	uint32_prop = (uint32_t *)of_get_property(port_node,
-+		"ar-filters-sizes", &lenp);
-+        if (uint32_prop) {
-+        	if (WARN_ON(lenp != sizeof(uint32_t)*3))
-+                RETURN_ERROR(MINOR, E_INVALID_VALUE, NO_MSG);
-+         
-+            p_LnxWrpFmPortDev->dsar_table_sizes.max_num_of_ip_prot_filtering  =
-+		(uint16_t)be32_to_cpu(uint32_prop[0]);
-+            p_LnxWrpFmPortDev->dsar_table_sizes.max_num_of_tcp_port_filtering =
-+		(uint16_t)be32_to_cpu(uint32_prop[1]);
-+            p_LnxWrpFmPortDev->dsar_table_sizes.max_num_of_udp_port_filtering =
-+		(uint16_t)be32_to_cpu(uint32_prop[2]);
-+        }
-+        
-+        if ((err = FM_PORT_ConfigDsarSupport(p_LnxWrpFmPortDev->h_Dev,
-+		(t_FmPortDsarTablesSizes*)&p_LnxWrpFmPortDev->dsar_table_sizes)) != E_OK)
-+		RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+
-+    of_node_put(port_node);
-+    of_node_put(fm_node);
-+
-+    return E_OK;
-+}
-+
-+static t_Error CheckNSetFmPortAdvArgs (t_LnxWrpFmPortDev *p_LnxWrpFmPortDev)
-+{
-+    struct device_node      *fm_node, *port_node;
-+    t_Error                 err;
-+    const uint32_t          *uint32_prop;
-+    /*const char              *str_prop;*/
-+    int                     lenp;
-+
-+    fm_node = GetFmAdvArgsDevTreeNode(((t_LnxWrpFmDev *) p_LnxWrpFmPortDev->h_LnxWrpFmDev)->id);
-+    if (!fm_node) /* no advance parameters for FMan */
-+        return E_OK;
-+
-+    port_node = GetFmPortAdvArgsDevTreeNode(fm_node,
-+                                            p_LnxWrpFmPortDev->settings.param.portType,
-+                                            p_LnxWrpFmPortDev->settings.param.portId);
-+    if (!port_node) /* no advance parameters for FMan-Port */
-+        return E_OK;
-+
-+#if (DPAA_VERSION >= 11)
-+    uint32_prop = (uint32_t *)of_get_property(port_node, "vsp-window", &lenp);
-+    if (uint32_prop) {
-+        t_FmPortVSPAllocParams  portVSPAllocParams;
-+        t_FmVspParams           fmVspParams;
-+        t_LnxWrpFmDev           *p_LnxWrpFmDev;
-+        uint8_t                 portId;
-+
-+        p_LnxWrpFmDev = ((t_LnxWrpFmDev *)p_LnxWrpFmPortDev->h_LnxWrpFmDev);
-+
-+    	if (WARN_ON(lenp != sizeof(uint32_t)*2))
-+            RETURN_ERROR(MINOR, E_INVALID_VALUE, NO_MSG);
-+
-+        if ((p_LnxWrpFmPortDev->settings.param.portType == e_FM_PORT_TYPE_TX) ||
-+            (p_LnxWrpFmPortDev->settings.param.portType == e_FM_PORT_TYPE_TX_10G) ||
-+            ((p_LnxWrpFmPortDev->settings.param.portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING) &&
-+             p_LnxWrpFmPortDev->settings.frag_enabled))
-+            return E_OK;
-+
-+        memset(&portVSPAllocParams, 0, sizeof(portVSPAllocParams));
-+        memset(&fmVspParams, 0, sizeof(fmVspParams));
-+
-+        portVSPAllocParams.numOfProfiles = (uint8_t)be32_to_cpu(uint32_prop[0]);
-+        portVSPAllocParams.dfltRelativeId = (uint8_t)be32_to_cpu(uint32_prop[1]);
-+        fmVspParams.h_Fm = p_LnxWrpFmDev->h_Dev;
-+
-+        fmVspParams.portParams.portType = p_LnxWrpFmPortDev->settings.param.portType;
-+        fmVspParams.portParams.portId   = p_LnxWrpFmPortDev->settings.param.portId;
-+        fmVspParams.relativeProfileId   = portVSPAllocParams.dfltRelativeId;
-+
-+        if (p_LnxWrpFmPortDev->settings.param.portType != e_FM_PORT_TYPE_OH_OFFLINE_PARSING)
-+        {
-+            portId = fmVspParams.portParams.portId;
-+            if (p_LnxWrpFmPortDev->settings.param.portType == e_FM_PORT_TYPE_RX_10G){
-+#ifndef CONFIG_FMAN_ARM
-+		if (!(IS_T1023_T1024))
-+#endif
-+                    portId += FM_MAX_NUM_OF_1G_RX_PORTS;
-+	    }
-+	    portVSPAllocParams.h_FmTxPort =
-+                p_LnxWrpFmDev->txPorts[portId].h_Dev;
-+            fmVspParams.liodnOffset =
-+                p_LnxWrpFmDev->rxPorts[portId].settings.param.specificParams.rxParams.liodnOffset;
-+            memcpy(&fmVspParams.extBufPools,
-+                   &p_LnxWrpFmPortDev->settings.param.specificParams.rxParams.extBufPools,
-+                   sizeof(t_FmExtPools));
-+        }
-+        else
-+        {
-+            memcpy(&fmVspParams.extBufPools,
-+                   &p_LnxWrpFmPortDev->opExtPools,
-+                   sizeof(t_FmExtPools));
-+        }
-+
-+        if ((err = FM_PORT_VSPAlloc(p_LnxWrpFmPortDev->h_Dev,
-+                                    &portVSPAllocParams)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+        /* We're initializing only the default VSP that are being used by the Linux-Ethernet-driver */
-+        if ((p_LnxWrpFmPortDev->settings.param.portType == e_FM_PORT_TYPE_OH_OFFLINE_PARSING) &&
-+            !p_LnxWrpFmPortDev->opExtPools.numOfPoolsUsed)
-+            return E_OK;
-+
-+        p_LnxWrpFmPortDev->h_DfltVsp = FM_VSP_Config(&fmVspParams);
-+        if (!p_LnxWrpFmPortDev->h_DfltVsp)
-+            RETURN_ERROR(MAJOR, E_INVALID_HANDLE, ("default-VSP for port!"));
-+
-+        if ((err = FM_VSP_ConfigBufferPrefixContent(p_LnxWrpFmPortDev->h_DfltVsp,
-+                                                    &p_LnxWrpFmPortDev->buffPrefixContent)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+
-+        if ((err = FM_VSP_Init(p_LnxWrpFmPortDev->h_DfltVsp)) != E_OK)
-+            RETURN_ERROR(MINOR, err, NO_MSG);
-+    }
-+#else
-+UNUSED(err); UNUSED(uint32_prop); UNUSED(lenp);
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    of_node_put(port_node);
-+    of_node_put(fm_node);
-+
-+    return E_OK;
-+}
-+
-+static t_Error ConfigureFmPortDev(t_LnxWrpFmPortDev *p_LnxWrpFmPortDev)
-+{
-+	t_LnxWrpFmDev *p_LnxWrpFmDev =
-+		(t_LnxWrpFmDev *) p_LnxWrpFmPortDev->h_LnxWrpFmDev;
-+	struct resource *dev_res;
-+
-+	if (!p_LnxWrpFmPortDev->active)
-+		RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+			     ("FM port not configured!!!"));
-+
-+	dev_res =
-+		__devm_request_region(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->res,
-+				      p_LnxWrpFmPortDev->phys_baseAddr,
-+				      p_LnxWrpFmPortDev->memSize,
-+				      "fman-port-hc");
-+	if (unlikely(dev_res == NULL))
-+		RETURN_ERROR(MAJOR, E_INVALID_STATE,
-+			     ("__devm_request_region() failed"));
-+	p_LnxWrpFmPortDev->baseAddr =
-+		PTR_TO_UINT(devm_ioremap
-+			    (p_LnxWrpFmDev->dev,
-+			     p_LnxWrpFmPortDev->phys_baseAddr,
-+			     p_LnxWrpFmPortDev->memSize));
-+	if (unlikely(p_LnxWrpFmPortDev->baseAddr == 0))
-+		REPORT_ERROR(MAJOR, E_INVALID_STATE,
-+			     ("devm_ioremap() failed"));
-+
-+	p_LnxWrpFmPortDev->settings.param.baseAddr =
-+		p_LnxWrpFmPortDev->baseAddr;
-+
-+	return E_OK;
-+}
-+
-+static t_Error InitFmPortDev(t_LnxWrpFmPortDev *p_LnxWrpFmPortDev)
-+{
-+#define MY_ADV_CONFIG_CHECK_END \
-+		RETURN_ERROR(MAJOR, E_INVALID_SELECTION,\
-+			("Advanced configuration routine"));\
-+		if (errCode != E_OK)\
-+			RETURN_ERROR(MAJOR, errCode, NO_MSG);\
-+	}
-+
-+	int i = 0;
-+
-+	if (!p_LnxWrpFmPortDev->active || p_LnxWrpFmPortDev->h_Dev)
-+		return E_INVALID_STATE;
-+
-+	p_LnxWrpFmPortDev->h_Dev =
-+		     FM_PORT_Config(&p_LnxWrpFmPortDev->settings.param);
-+	if (p_LnxWrpFmPortDev->h_Dev == NULL)
-+		RETURN_ERROR(MAJOR, E_INVALID_HANDLE, ("FM-port"));
-+
-+#ifndef  FM_QMI_NO_DEQ_OPTIONS_SUPPORT
-+	if ((p_LnxWrpFmPortDev->settings.param.portType ==
-+	     e_FM_PORT_TYPE_TX_10G)
-+	    || (p_LnxWrpFmPortDev->settings.param.portType ==
-+		e_FM_PORT_TYPE_TX)) {
-+		t_Error errCode = E_OK;
-+		errCode =
-+		     FM_PORT_ConfigDeqHighPriority(p_LnxWrpFmPortDev->h_Dev,
-+								   TRUE);
-+		if (errCode != E_OK)
-+			RETURN_ERROR(MAJOR, errCode, NO_MSG);
-+		errCode =
-+		FM_PORT_ConfigDeqPrefetchOption(p_LnxWrpFmPortDev->h_Dev,
-+						e_FM_PORT_DEQ_FULL_PREFETCH);
-+		if (errCode
-+		    != E_OK)
-+			RETURN_ERROR(MAJOR, errCode, NO_MSG);
-+	}
-+#endif  /* !FM_QMI_NO_DEQ_OPTIONS_SUPPORT */
-+
-+#ifndef CONFIG_FMAN_ARM
-+#ifdef FM_BCB_ERRATA_BMI_SW001
-+/* Configure BCB workaround on Rx ports, only for B4860 rev1 */
-+#define SVR_SECURITY_MASK    0x00080000
-+#define SVR_PERSONALITY_MASK 0x0000FF00
-+#define SVR_VER_IGNORE_MASK (SVR_SECURITY_MASK | SVR_PERSONALITY_MASK)
-+#define SVR_B4860_REV1_VALUE 0x86800010
-+
-+	if ((p_LnxWrpFmPortDev->settings.param.portType ==
-+		e_FM_PORT_TYPE_RX_10G) ||
-+		(p_LnxWrpFmPortDev->settings.param.portType ==
-+		e_FM_PORT_TYPE_RX)) {
-+		unsigned int svr;
-+
-+		svr = mfspr(SPRN_SVR);
-+
-+		if ((svr & ~SVR_VER_IGNORE_MASK) == SVR_B4860_REV1_VALUE)
-+			FM_PORT_ConfigBCBWorkaround(p_LnxWrpFmPortDev->h_Dev);
-+	}
-+#endif /* FM_BCB_ERRATA_BMI_SW001 */
-+#endif /* CONFIG_FMAN_ARM */
-+/* Call the driver's advanced configuration routines, if requested:
-+   Compare the function pointer of each entry to the available routines,
-+   and invoke the matching routine with proper casting of arguments. */
-+	while (p_LnxWrpFmPortDev->settings.advConfig[i].p_Function
-+	       && (i < FM_MAX_NUM_OF_ADV_SETTINGS)) {
-+
-+/* TODO: Change this MACRO */
-+			ADV_CONFIG_CHECK_START(
-+				&(p_LnxWrpFmPortDev->settings.advConfig[i]))
-+
-+			ADV_CONFIG_CHECK(p_LnxWrpFmPortDev->h_Dev,
-+					 FM_PORT_ConfigBufferPrefixContent,
-+					 NCSW_PARAMS(1,
-+						(t_FmBufferPrefixContent *)))
-+
-+			if ((p_LnxWrpFmPortDev->settings.param.portType ==
-+				    e_FM_PORT_TYPE_OH_OFFLINE_PARSING) &&
-+				   (p_LnxWrpFmPortDev->settings.frag_enabled == TRUE)) {
-+
-+				ADV_CONFIG_CHECK(p_LnxWrpFmPortDev->h_Dev,
-+					FM_PORT_ConfigExtBufPools,
-+					NCSW_PARAMS(1, (t_FmExtPools *)))
-+
-+		/* this define contains an else */
-+		MY_ADV_CONFIG_CHECK_END
-+		}
-+
-+			/* Advance to next advanced configuration entry */
-+			i++;
-+	}
-+
-+
-+    if ((p_LnxWrpFmPortDev->settings.param.portType != e_FM_PORT_TYPE_TX) &&
-+        (p_LnxWrpFmPortDev->settings.param.portType != e_FM_PORT_TYPE_TX_10G)) {
-+            if (FM_PORT_ConfigErrorsToDiscard(p_LnxWrpFmPortDev->h_Dev, (FM_PORT_FRM_ERR_IPRE |
-+                                                                         FM_PORT_FRM_ERR_IPR_NCSP |
-+                                                                         FM_PORT_FRM_ERR_CLS_DISCARD)) !=E_OK)
-+            RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+    }
-+
-+    if (CheckNConfigFmPortAdvArgs(p_LnxWrpFmPortDev) != E_OK)
-+		RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+
-+    if (FM_PORT_Init(p_LnxWrpFmPortDev->h_Dev) != E_OK)
-+		RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+
-+    if (CheckNSetFmPortAdvArgs(p_LnxWrpFmPortDev) != E_OK)
-+		RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+
-+/* FMan Fifo sizes behind the scene":
-+ * Using the following formulae (*), under a set of simplifying assumptions (.):
-+ *  . all ports are configured in Normal Mode (rather than Independent Mode)
-+ *  . the DPAA Eth driver allocates buffers of size:
-+ *      . MAXFRM + NET_IP_ALIGN + DPA_PRIV_DATA_SIZE + DPA_PARSE_RESULTS_SIZE
-+ *		 + DPA_HASH_RESULTS_SIZE, i.e.:
-+ *        MAXFRM + 2 + 16 + sizeof(t_FmPrsResult) + 16, i.e.:
-+ *        MAXFRM + 66
-+ *  . excessive buffer pools not accounted for
-+ *
-+ *  * for Rx ports on P4080:
-+ *      . IFSZ = ceil(max(FMBM_EBMPI[PBS]) / 256) * 256 + 7 * 256
-+ *      . no internal frame offset (FMBM_RIM[FOF] == 0) - otherwise,
-+ *      add up to 256 to the above
-+ *
-+ *  * for Rx ports on P1023:
-+ *      . IFSZ = ceil(second_largest(FMBM_EBMPI[PBS] / 256)) * 256 + 7 * 256,
-+ *      if at least 2 bpools are configured
-+ *      . IFSZ = 8 * 256, if only a single bpool is configured
-+ *
-+ *  * for Tx ports:
-+ *      . IFSZ = ceil(frame_size / 256) * 256 + 3 * 256
-+ *			+ FMBM_TFP[DPDE] * 256, i.e.:
-+ *        IFSZ = ceil(MAXFRM / 256) * 256 + 3 x 256 + FMBM_TFP[DPDE] * 256
-+ *
-+ *  * for OH ports on P4080:
-+ *      . IFSZ = ceil(frame_size / 256) * 256 + 1 * 256 + FMBM_PP[MXT] * 256
-+ *  * for OH ports on P1023:
-+ *      . IFSZ = ceil(frame_size / 256) * 256 + 3 * 256 + FMBM_TFP[DPDE] * 256
-+ *  * for both P4080 and P1023:
-+ *      . (conservative decisions, assuming that BMI must bring the entire
-+ *      frame, not only the frame header)
-+ *      . no internal frame offset (FMBM_OIM[FOF] == 0) - otherwise,
-+ *      add up to 256 to the above
-+ *
-+ *  . for P4080/P5020/P3041/P2040, DPDE is:
-+ *              > 0 or 1, for 1Gb ports, HW default: 0
-+ *              > 2..7 (recommended: 3..7) for 10Gb ports, HW default: 3
-+ *  . for P1023, DPDE should be 1
-+ *
-+ *  . for P1023, MXT is in range (0..31)
-+ *  . for P4080, MXT is in range (0..63)
-+ *
-+ */
-+#if 0
-+	if ((p_LnxWrpFmPortDev->defPcd != e_NO_PCD) &&
-+	    (InitFmPort3TupleDefPcd(p_LnxWrpFmPortDev) != E_OK))
-+		RETURN_ERROR(MAJOR, E_INVALID_STATE, NO_MSG);
-+#endif
-+	return E_OK;
-+}
-+
-+void fm_set_rx_port_params(struct fm_port *port,
-+			   struct fm_port_params *params)
-+{
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *) port;
-+	int i;
-+
-+	p_LnxWrpFmPortDev->settings.param.specificParams.rxParams.errFqid =
-+		params->errq;
-+	p_LnxWrpFmPortDev->settings.param.specificParams.rxParams.dfltFqid =
-+		params->defq;
-+	p_LnxWrpFmPortDev->settings.param.specificParams.rxParams.extBufPools.
-+		numOfPoolsUsed = params->num_pools;
-+	for (i = 0; i < params->num_pools; i++) {
-+		p_LnxWrpFmPortDev->settings.param.specificParams.rxParams.
-+			extBufPools.extBufPool[i].id =
-+			params->pool_param[i].id;
-+		p_LnxWrpFmPortDev->settings.param.specificParams.rxParams.
-+			extBufPools.extBufPool[i].size =
-+			params->pool_param[i].size;
-+	}
-+
-+	p_LnxWrpFmPortDev->buffPrefixContent.privDataSize =
-+		params->priv_data_size;
-+	p_LnxWrpFmPortDev->buffPrefixContent.passPrsResult =
-+		params->parse_results;
-+	p_LnxWrpFmPortDev->buffPrefixContent.passHashResult =
-+		params->hash_results;
-+	p_LnxWrpFmPortDev->buffPrefixContent.passTimeStamp =
-+		params->time_stamp;
-+	p_LnxWrpFmPortDev->buffPrefixContent.dataAlign =
-+		params->data_align;
-+	p_LnxWrpFmPortDev->buffPrefixContent.manipExtraSpace =
-+		params->manip_extra_space;
-+
-+	ADD_ADV_CONFIG_START(p_LnxWrpFmPortDev->settings.advConfig,
-+			     FM_MAX_NUM_OF_ADV_SETTINGS)
-+
-+		ADD_ADV_CONFIG_NO_RET(FM_PORT_ConfigBufferPrefixContent,
-+				      ARGS(1,
-+					   (&p_LnxWrpFmPortDev->
-+					    buffPrefixContent)));
-+
-+	ADD_ADV_CONFIG_END InitFmPortDev(p_LnxWrpFmPortDev);
-+}
-+EXPORT_SYMBOL(fm_set_rx_port_params);
-+
-+/* this function is called from oh_probe as well, thus it contains oh port
-+ * specific parameters (make sure everything is checked) */
-+void fm_set_tx_port_params(struct fm_port *port,
-+			   struct fm_port_params *params)
-+{
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *) port;
-+
-+	p_LnxWrpFmPortDev->settings.param.specificParams.nonRxParams.errFqid =
-+		params->errq;
-+	p_LnxWrpFmPortDev->settings.param.specificParams.nonRxParams.
-+		dfltFqid = params->defq;
-+
-+	p_LnxWrpFmPortDev->buffPrefixContent.privDataSize =
-+		params->priv_data_size;
-+	p_LnxWrpFmPortDev->buffPrefixContent.passPrsResult =
-+		params->parse_results;
-+	p_LnxWrpFmPortDev->buffPrefixContent.passHashResult =
-+		params->hash_results;
-+	p_LnxWrpFmPortDev->buffPrefixContent.passTimeStamp =
-+		params->time_stamp;
-+	p_LnxWrpFmPortDev->settings.frag_enabled =
-+		params->frag_enable;
-+	p_LnxWrpFmPortDev->buffPrefixContent.dataAlign =
-+		params->data_align;
-+	p_LnxWrpFmPortDev->buffPrefixContent.manipExtraSpace =
-+		params->manip_extra_space;
-+
-+	ADD_ADV_CONFIG_START(p_LnxWrpFmPortDev->settings.advConfig,
-+			     FM_MAX_NUM_OF_ADV_SETTINGS)
-+
-+	ADD_ADV_CONFIG_NO_RET(FM_PORT_ConfigBufferPrefixContent,
-+			      ARGS(1,
-+				   (&p_LnxWrpFmPortDev->
-+				    buffPrefixContent)));
-+
-+	/* oh port specific parameter (for fragmentation only) */
-+	if ((p_LnxWrpFmPortDev->settings.param.portType ==
-+	     e_FM_PORT_TYPE_OH_OFFLINE_PARSING) &&
-+	     params->num_pools) {
-+		int i;
-+
-+		p_LnxWrpFmPortDev->opExtPools.numOfPoolsUsed = params->num_pools;
-+		for (i = 0; i < params->num_pools; i++) {
-+			p_LnxWrpFmPortDev->opExtPools.extBufPool[i].id = params->pool_param[i].id;
-+			p_LnxWrpFmPortDev->opExtPools.extBufPool[i].size = params->pool_param[i].size;
-+		}
-+
-+		if (p_LnxWrpFmPortDev->settings.frag_enabled)
-+		ADD_ADV_CONFIG_NO_RET(FM_PORT_ConfigExtBufPools,
-+				      ARGS(1, (&p_LnxWrpFmPortDev->opExtPools)));
-+	}
-+
-+	ADD_ADV_CONFIG_END InitFmPortDev(p_LnxWrpFmPortDev);
-+}
-+EXPORT_SYMBOL(fm_set_tx_port_params);
-+
-+void fm_mac_set_handle(t_Handle h_lnx_wrp_fm_dev,
-+        t_Handle h_fm_mac,
-+        int mac_id)
-+{
-+    t_LnxWrpFmDev *p_lnx_wrp_fm_dev = (t_LnxWrpFmDev *)h_lnx_wrp_fm_dev;
-+
-+    p_lnx_wrp_fm_dev->macs[mac_id].h_Dev = h_fm_mac;
-+    p_lnx_wrp_fm_dev->macs[mac_id].h_LnxWrpFmDev = h_lnx_wrp_fm_dev;
-+}
-+EXPORT_SYMBOL(fm_mac_set_handle);
-+
-+static void LnxwrpFmPcdDevExceptionsCb(t_Handle h_App,
-+				       e_FmPcdExceptions exception)
-+{
-+	t_LnxWrpFmDev *p_LnxWrpFmDev = (t_LnxWrpFmDev *) h_App;
-+
-+	ASSERT_COND(p_LnxWrpFmDev);
-+
-+	DBG(INFO, ("got fm-pcd exception %d", exception));
-+
-+	/* do nothing */
-+	UNUSED(exception);
-+}
-+
-+static void LnxwrpFmPcdDevIndexedExceptionsCb(t_Handle h_App,
-+					      e_FmPcdExceptions exception,
-+					      uint16_t index)
-+{
-+	t_LnxWrpFmDev *p_LnxWrpFmDev = (t_LnxWrpFmDev *) h_App;
-+
-+	ASSERT_COND(p_LnxWrpFmDev);
-+
-+	DBG(INFO,
-+	    ("got fm-pcd-indexed exception %d, indx %d", exception, index));
-+
-+	/* do nothing */
-+	UNUSED(exception);
-+	UNUSED(index);
-+}
-+
-+static t_Error InitFmPcdDev(t_LnxWrpFmDev *p_LnxWrpFmDev)
-+{
-+	spin_lock_init(&lock);
-+
-+	if (p_LnxWrpFmDev->pcdActive) {
-+		t_LnxWrpFmPortDev *p_LnxWrpFmPortDev = &p_LnxWrpFmDev->hcPort;
-+		t_FmPcdParams fmPcdParams;
-+		t_Error err;
-+
-+		memset(&fmPcdParams, 0, sizeof(fmPcdParams));
-+		fmPcdParams.h_Fm = p_LnxWrpFmDev->h_Dev;
-+		fmPcdParams.prsSupport = p_LnxWrpFmDev->prsActive;
-+		fmPcdParams.kgSupport = p_LnxWrpFmDev->kgActive;
-+		fmPcdParams.plcrSupport = p_LnxWrpFmDev->plcrActive;
-+		fmPcdParams.ccSupport = p_LnxWrpFmDev->ccActive;
-+		fmPcdParams.numOfSchemes = FM_PCD_KG_NUM_OF_SCHEMES;
-+
-+#ifndef CONFIG_GUEST_PARTITION
-+		fmPcdParams.f_Exception = LnxwrpFmPcdDevExceptionsCb;
-+		if (fmPcdParams.kgSupport)
-+			fmPcdParams.f_ExceptionId =
-+				LnxwrpFmPcdDevIndexedExceptionsCb;
-+		fmPcdParams.h_App = p_LnxWrpFmDev;
-+#endif /* !CONFIG_GUEST_PARTITION */
-+
-+#ifdef CONFIG_MULTI_PARTITION_SUPPORT
-+		fmPcdParams.numOfSchemes = 0;
-+		fmPcdParams.numOfClsPlanEntries = 0;
-+		fmPcdParams.partitionId = 0;
-+#endif /* CONFIG_MULTI_PARTITION_SUPPORT */
-+		fmPcdParams.useHostCommand = TRUE;
-+
-+		p_LnxWrpFmDev->hc_tx_fq =
-+			FqAlloc(p_LnxWrpFmDev,
-+				0,
-+				QMAN_FQ_FLAG_TO_DCPORTAL,
-+				p_LnxWrpFmPortDev->txCh, 0);
-+		if (!p_LnxWrpFmDev->hc_tx_fq)
-+			RETURN_ERROR(MAJOR, E_NULL_POINTER,
-+				     ("Frame queue allocation failed..."));
-+
-+		p_LnxWrpFmDev->hc_tx_conf_fq =
-+			FqAlloc(p_LnxWrpFmDev,
-+				0,
-+				QMAN_FQ_FLAG_NO_ENQUEUE,
-+				p_LnxWrpFmDev->hcCh, 1);
-+		if (!p_LnxWrpFmDev->hc_tx_conf_fq)
-+			RETURN_ERROR(MAJOR, E_NULL_POINTER,
-+				     ("Frame queue allocation failed..."));
-+
-+		p_LnxWrpFmDev->hc_tx_err_fq =
-+			FqAlloc(p_LnxWrpFmDev,
-+				0,
-+				QMAN_FQ_FLAG_NO_ENQUEUE,
-+				p_LnxWrpFmDev->hcCh, 2);
-+		if (!p_LnxWrpFmDev->hc_tx_err_fq)
-+			RETURN_ERROR(MAJOR, E_NULL_POINTER,
-+				     ("Frame queue allocation failed..."));
-+
-+		fmPcdParams.hc.portBaseAddr = p_LnxWrpFmPortDev->baseAddr;
-+		fmPcdParams.hc.portId =
-+			p_LnxWrpFmPortDev->settings.param.portId;
-+		fmPcdParams.hc.liodnBase =
-+			p_LnxWrpFmPortDev->settings.param.liodnBase;
-+		fmPcdParams.hc.errFqid =
-+			qman_fq_fqid(p_LnxWrpFmDev->hc_tx_err_fq);
-+		fmPcdParams.hc.confFqid =
-+			qman_fq_fqid(p_LnxWrpFmDev->hc_tx_conf_fq);
-+		fmPcdParams.hc.qmChannel = p_LnxWrpFmPortDev->txCh;
-+		fmPcdParams.hc.f_QmEnqueue = QmEnqueueCB;
-+		fmPcdParams.hc.h_QmArg = (t_Handle) p_LnxWrpFmDev;
-+
-+		p_LnxWrpFmDev->h_PcdDev = FM_PCD_Config(&fmPcdParams);
-+		if (!p_LnxWrpFmDev->h_PcdDev)
-+			RETURN_ERROR(MAJOR, E_INVALID_HANDLE, ("FM PCD!"));
-+
-+		err =
-+		FM_PCD_ConfigPlcrNumOfSharedProfiles(p_LnxWrpFmDev->h_PcdDev,
-+				LNXWRP_FM_NUM_OF_SHARED_PROFILES);
-+		if (err != E_OK)
-+			RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+		err = FM_PCD_Init(p_LnxWrpFmDev->h_PcdDev);
-+		if (err != E_OK)
-+			RETURN_ERROR(MAJOR, err, NO_MSG);
-+
-+		if (p_LnxWrpFmDev->err_irq == 0) {
-+			FM_PCD_SetException(p_LnxWrpFmDev->h_PcdDev,
-+				e_FM_PCD_KG_EXCEPTION_DOUBLE_ECC,
-+				FALSE);
-+			FM_PCD_SetException(p_LnxWrpFmDev->h_PcdDev,
-+				e_FM_PCD_KG_EXCEPTION_KEYSIZE_OVERFLOW,
-+				FALSE);
-+			FM_PCD_SetException(p_LnxWrpFmDev->h_PcdDev,
-+				e_FM_PCD_PLCR_EXCEPTION_INIT_ENTRY_ERROR,
-+				FALSE);
-+			FM_PCD_SetException(p_LnxWrpFmDev->h_PcdDev,
-+				e_FM_PCD_PLCR_EXCEPTION_DOUBLE_ECC,
-+				FALSE);
-+			FM_PCD_SetException(p_LnxWrpFmDev->h_PcdDev,
-+				e_FM_PCD_PRS_EXCEPTION_DOUBLE_ECC,
-+				FALSE);
-+			FM_PCD_SetException(p_LnxWrpFmDev->h_PcdDev,
-+			    e_FM_PCD_PLCR_EXCEPTION_PRAM_SELF_INIT_COMPLETE,
-+				FALSE);
-+			FM_PCD_SetException(p_LnxWrpFmDev->h_PcdDev,
-+				e_FM_PCD_PLCR_EXCEPTION_ATOMIC_ACTION_COMPLETE,
-+				FALSE);
-+			FM_PCD_SetException(p_LnxWrpFmDev->h_PcdDev,
-+				e_FM_PCD_PRS_EXCEPTION_SINGLE_ECC,
-+				FALSE);
-+		}
-+	}
-+
-+	return E_OK;
-+}
-+
-+void FreeFmPcdDev(t_LnxWrpFmDev *p_LnxWrpFmDev)
-+{
-+
-+	if (p_LnxWrpFmDev->h_PcdDev)
-+		FM_PCD_Free(p_LnxWrpFmDev->h_PcdDev);
-+
-+	if (p_LnxWrpFmDev->hc_tx_err_fq)
-+		FqFree(p_LnxWrpFmDev->hc_tx_err_fq);
-+
-+	if (p_LnxWrpFmDev->hc_tx_conf_fq)
-+		FqFree(p_LnxWrpFmDev->hc_tx_conf_fq);
-+
-+	if (p_LnxWrpFmDev->hc_tx_fq)
-+		FqFree(p_LnxWrpFmDev->hc_tx_fq);
-+}
-+
-+static void FreeFmPortDev(t_LnxWrpFmPortDev *p_LnxWrpFmPortDev)
-+{
-+	t_LnxWrpFmDev *p_LnxWrpFmDev =
-+		(t_LnxWrpFmDev *) p_LnxWrpFmPortDev->h_LnxWrpFmDev;
-+
-+	if (!p_LnxWrpFmPortDev->active)
-+		return;
-+
-+	if (p_LnxWrpFmPortDev->h_Dev)
-+		FM_PORT_Free(p_LnxWrpFmPortDev->h_Dev);
-+
-+	devm_iounmap(p_LnxWrpFmDev->dev,
-+		     UINT_TO_PTR(p_LnxWrpFmPortDev->baseAddr));
-+	__devm_release_region(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->res,
-+			      p_LnxWrpFmPortDev->phys_baseAddr,
-+			      p_LnxWrpFmPortDev->memSize);
-+}
-+
-+static int /*__devinit*/ fm_port_probe(struct platform_device *of_dev)
-+{
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev;
-+	t_LnxWrpFmDev *p_LnxWrpFmDev;
-+	struct device *dev;
-+
-+	dev = &of_dev->dev;
-+
-+	p_LnxWrpFmPortDev = ReadFmPortDevTreeNode(of_dev);
-+	if (p_LnxWrpFmPortDev == NULL)
-+		return -EIO;
-+	/* Port can be inactive, thus will not be probed:
-+	   - in performance mode, OH ports are disabled
-+	   ...
-+	 */
-+	if (!p_LnxWrpFmPortDev->active)
-+		return 0;
-+
-+	if (ConfigureFmPortDev(p_LnxWrpFmPortDev) != E_OK)
-+		return -EIO;
-+
-+	dev_set_drvdata(dev, p_LnxWrpFmPortDev);
-+
-+	if (p_LnxWrpFmPortDev->settings.param.portType ==
-+		e_FM_PORT_TYPE_OH_HOST_COMMAND)
-+		InitFmPcdDev((t_LnxWrpFmDev *) p_LnxWrpFmPortDev->h_LnxWrpFmDev);
-+
-+	p_LnxWrpFmDev = (t_LnxWrpFmDev *) p_LnxWrpFmPortDev->h_LnxWrpFmDev;
-+
-+	if (p_LnxWrpFmPortDev->settings.param.portType == e_FM_PORT_TYPE_RX) {
-+		Sprint(p_LnxWrpFmPortDev->name, "%s-port-rx%d",
-+		       p_LnxWrpFmDev->name, p_LnxWrpFmPortDev->id);
-+		p_LnxWrpFmPortDev->minor =
-+			p_LnxWrpFmPortDev->id + DEV_FM_RX_PORTS_MINOR_BASE;
-+	} else if (p_LnxWrpFmPortDev->settings.param.portType ==
-+		 e_FM_PORT_TYPE_RX_10G) {
-+		Sprint(p_LnxWrpFmPortDev->name, "%s-port-rx%d",
-+		       p_LnxWrpFmDev->name,
-+		       p_LnxWrpFmPortDev->id + FM_MAX_NUM_OF_1G_RX_PORTS);
-+		p_LnxWrpFmPortDev->minor =
-+			p_LnxWrpFmPortDev->id + FM_MAX_NUM_OF_1G_RX_PORTS +
-+			DEV_FM_RX_PORTS_MINOR_BASE;
-+#ifndef CONFIG_FMAN_ARM
-+		if (IS_T1023_T1024) {
-+			Sprint(p_LnxWrpFmPortDev->name, "%s-port-rx%d",
-+				p_LnxWrpFmDev->name,
-+				p_LnxWrpFmPortDev->id);
-+			p_LnxWrpFmPortDev->minor =
-+				p_LnxWrpFmPortDev->id +
-+				DEV_FM_RX_PORTS_MINOR_BASE;
-+		}
-+#endif
-+	} else if (p_LnxWrpFmPortDev->settings.param.portType ==
-+		 e_FM_PORT_TYPE_TX) {
-+		Sprint(p_LnxWrpFmPortDev->name, "%s-port-tx%d",
-+		       p_LnxWrpFmDev->name, p_LnxWrpFmPortDev->id);
-+		p_LnxWrpFmPortDev->minor =
-+			p_LnxWrpFmPortDev->id + DEV_FM_TX_PORTS_MINOR_BASE;
-+	} else if (p_LnxWrpFmPortDev->settings.param.portType ==
-+		 e_FM_PORT_TYPE_TX_10G) {
-+		Sprint(p_LnxWrpFmPortDev->name, "%s-port-tx%d",
-+		       p_LnxWrpFmDev->name,
-+		       p_LnxWrpFmPortDev->id + FM_MAX_NUM_OF_1G_TX_PORTS);
-+		p_LnxWrpFmPortDev->minor =
-+			p_LnxWrpFmPortDev->id + FM_MAX_NUM_OF_1G_TX_PORTS +
-+			DEV_FM_TX_PORTS_MINOR_BASE;
-+#ifndef CONFIG_FMAN_ARM
-+		if (IS_T1023_T1024) {
-+			Sprint(p_LnxWrpFmPortDev->name, "%s-port-tx%d",
-+				p_LnxWrpFmDev->name,
-+				p_LnxWrpFmPortDev->id);
-+			p_LnxWrpFmPortDev->minor =
-+				p_LnxWrpFmPortDev->id +
-+				DEV_FM_TX_PORTS_MINOR_BASE;
-+		}
-+#endif
-+	} else if (p_LnxWrpFmPortDev->settings.param.portType ==
-+		 e_FM_PORT_TYPE_OH_HOST_COMMAND) {
-+		Sprint(p_LnxWrpFmPortDev->name, "%s-port-oh%d",
-+		       p_LnxWrpFmDev->name, p_LnxWrpFmPortDev->id);
-+		p_LnxWrpFmPortDev->minor =
-+			p_LnxWrpFmPortDev->id + DEV_FM_OH_PORTS_MINOR_BASE;
-+	} else if (p_LnxWrpFmPortDev->settings.param.portType ==
-+		 e_FM_PORT_TYPE_OH_OFFLINE_PARSING) {
-+		Sprint(p_LnxWrpFmPortDev->name, "%s-port-oh%d",
-+		       p_LnxWrpFmDev->name, p_LnxWrpFmPortDev->id + 1);
-+		p_LnxWrpFmPortDev->minor =
-+			p_LnxWrpFmPortDev->id + 1 +
-+			DEV_FM_OH_PORTS_MINOR_BASE;
-+	}
-+
-+	device_create(p_LnxWrpFmDev->fm_class, NULL,
-+		      MKDEV(p_LnxWrpFmDev->major, p_LnxWrpFmPortDev->minor),
-+		      NULL, p_LnxWrpFmPortDev->name);
-+
-+	/* create sysfs entries for stats and regs */
-+
-+	if (fm_port_sysfs_create(dev) != 0) {
-+		FreeFmPortDev(p_LnxWrpFmPortDev);
-+		REPORT_ERROR(MAJOR, E_INVALID_STATE,
-+			     ("Unable to create sys entry - fm port!!!"));
-+		return -EIO;
-+	}
-+
-+#ifdef FM_TX_INVALID_ECC_ERRATA_10GMAC_A009
-+	FM_DisableRamsEcc(p_LnxWrpFmDev->h_Dev);
-+#endif /* FM_TX_INVALID_ECC_ERRATA_10GMAC_A009 */
-+
-+	DBG(TRACE, ("%s probed", p_LnxWrpFmPortDev->name));
-+
-+	return 0;
-+}
-+
-+static int fm_port_remove(struct platform_device *of_dev)
-+{
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev;
-+	t_LnxWrpFmDev *p_LnxWrpFmDev;
-+	struct device *dev;
-+
-+	dev = &of_dev->dev;
-+	p_LnxWrpFmPortDev = dev_get_drvdata(dev);
-+
-+	fm_port_sysfs_destroy(dev);
-+
-+	p_LnxWrpFmDev = (t_LnxWrpFmDev *) p_LnxWrpFmPortDev->h_LnxWrpFmDev;
-+	device_destroy(p_LnxWrpFmDev->fm_class,
-+		       MKDEV(p_LnxWrpFmDev->major, p_LnxWrpFmPortDev->minor));
-+
-+	FreeFmPortDev(p_LnxWrpFmPortDev);
-+
-+	dev_set_drvdata(dev, NULL);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id fm_port_match[] = {
-+	{
-+	 .compatible = "fsl,fman-port-oh"},
-+	{
-+	 .compatible = "fsl,fman-port-1g-rx"},
-+	{
-+	 .compatible = "fsl,fman-port-10g-rx"},
-+	{
-+	 .compatible = "fsl,fman-port-1g-tx"},
-+	{
-+	 .compatible = "fsl,fman-port-10g-tx"},
-+	{}
-+};
-+
-+#ifndef MODULE
-+MODULE_DEVICE_TABLE(of, fm_port_match);
-+#endif /* !MODULE */
-+
-+static struct platform_driver fm_port_driver = {
-+
-+	.driver = {
-+		   .name = "fsl-fman-port",
-+		   .of_match_table = fm_port_match,
-+		   .owner = THIS_MODULE,
-+		   },
-+	.probe = fm_port_probe,
-+	.remove = fm_port_remove
-+};
-+
-+
-+t_Error LNXWRP_FM_Port_Init(void)
-+{
-+	/* Register to the DTB for basic FM port API */
-+	if (platform_driver_register(&fm_port_driver))
-+		return E_NO_DEVICE;
-+
-+	return E_OK;
-+}
-+
-+void LNXWRP_FM_Port_Free(void)
-+{
-+	platform_driver_unregister(&fm_port_driver);
-+}
-+
-+static int __init __cold fm_port_load(void)
-+{
-+	if (LNXWRP_FM_Port_Init() != E_OK) {
-+		printk(KERN_CRIT "Failed to init FM Ports wrapper!\n");
-+		return -ENODEV;
-+	}
-+
-+	printk(KERN_CRIT "Freescale FM Ports module\n");
-+
-+	return 0;
-+}
-+
-+static void __exit __cold fm_port_unload(void)
-+{
-+	LNXWRP_FM_Port_Free();
-+}
-+
-+module_init(fm_port_load);
-+module_exit(fm_port_unload);
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm.c
-@@ -0,0 +1,4813 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/*
-+ @File          lnxwrp_ioctls_fm.c
-+ @Author        Shlomi Gridish
-+ @Description   FM Linux wrapper functions.
-+*/
-+
-+/* Linux Headers ------------------- */
-+#include <linux/version.h>
-+
-+#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
-+#define MODVERSIONS
-+#endif
-+#ifdef MODVERSIONS
-+#include <config/modversions.h>
-+#endif /* MODVERSIONS */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/fs.h>
-+#include <linux/cdev.h>
-+#include <linux/device.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/of_platform.h>
-+#include <linux/uaccess.h>
-+#include <asm/errno.h>
-+#ifndef CONFIG_FMAN_ARM
-+#include <sysdev/fsl_soc.h>
-+#include <linux/fsl/svr.h>
-+#endif
-+
-+#if defined(CONFIG_COMPAT)
-+#include <linux/compat.h>
-+#endif
-+
-+#include "part_ext.h"
-+#include "fm_ioctls.h"
-+#include "fm_pcd_ioctls.h"
-+#include "fm_port_ioctls.h"
-+#include "fm_vsp_ext.h"
-+
-+#ifndef CONFIG_FMAN_ARM
-+#define IS_T1023_T1024	(SVR_SOC_VER(mfspr(SPRN_SVR)) == SVR_T1024 || \
-+			SVR_SOC_VER(mfspr(SPRN_SVR)) == SVR_T1023)
-+#endif
-+
-+#define __ERR_MODULE__  MODULE_FM
-+
-+#if defined(CONFIG_COMPAT)
-+#include "lnxwrp_ioctls_fm_compat.h"
-+#endif
-+
-+#include "lnxwrp_fm.h"
-+
-+#define CMP_IOC_DEFINE(def) (IOC_##def != def)
-+
-+/* fm_pcd_ioctls.h === fm_pcd_ext.h assertions */
-+#if CMP_IOC_DEFINE(FM_PCD_MAX_NUM_OF_PRIVATE_HDRS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_PRS_NUM_OF_HDRS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_KG_NUM_OF_GENERIC_REGS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_KG_NUM_OF_EXTRACT_MASKS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_KG_NUM_OF_DEFAULT_GROUPS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_PRS_NUM_OF_LABELS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_SW_PRS_SIZE)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_MAX_MANIP_INSRT_TEMPLATE_SIZE)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if DPAA_VERSION >= 11
-+#if CMP_IOC_DEFINE(FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_MAX_NUM_OF_CC_TREES)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_MAX_NUM_OF_CC_GROUPS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_MAX_NUM_OF_CC_UNITS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_MAX_NUM_OF_KEYS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_MAX_SIZE_OF_KEY)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_MAX_NUM_OF_CC_ENTRIES_IN_GRP)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(FM_PCD_LAST_KEY_INDEX)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+/* net_ioctls.h === net_ext.h assertions */
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_PPP_PID)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_PPP_COMPRESSED)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_PPP_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_PPPoE_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_PPPMUX_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_PPPMUX_SUBFRAME_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_ETH_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_IPv4_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_IPv6_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_ICMP_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_IGMP_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_TCP_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_SCTP_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_DCCP_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_UDP_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_UDP_ENCAP_ESP_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_IPHC_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_SCTP_CHUNK_DATA_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_L2TPv2_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_L2TPv3_CTRL_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_L2TPv3_SESS_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_VLAN_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_LLC_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_NLPID_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_SNAP_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_LLC_SNAP_ALL_FIELDS)
-+#warning Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_ARP_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_RFC2684_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_USER_DEFINED_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_PAYLOAD_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_GRE_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_MINENCAP_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_IPSEC_AH_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_IPSEC_ESP_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_MPLS_LABEL_STACK_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+#if CMP_IOC_DEFINE(NET_HEADER_FIELD_MACSEC_ALL_FIELDS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+/* fm_ioctls.h === fm_ext.h assertions */
-+#if CMP_IOC_DEFINE(FM_MAX_NUM_OF_VALID_PORTS)
-+#error Error: please synchronize IOC_ defines!
-+#endif
-+
-+void LnxWrpPCDIOCTLTypeChecking(void)
-+{
-+    /* fm_ext.h == fm_ioctls.h */
-+    ASSERT_COND(sizeof(ioc_fm_port_bandwidth_params) == sizeof(t_FmPortsBandwidthParams));
-+    ASSERT_COND(sizeof(ioc_fm_revision_info_t) == sizeof(t_FmRevisionInfo));
-+
-+    /* fm_pcd_ext.h == fm_pcd_ioctls.h */
-+    /*ioc_fm_pcd_counters_params_t  : NOT USED */
-+    /*ioc_fm_pcd_exception_params_t : private */
-+#if (DPAA_VERSION >= 11)
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_frag_capwap_params_t) == sizeof(t_FmPcdManipFragCapwapParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_reassem_capwap_params_t) == sizeof(t_FmPcdManipReassemCapwapParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_hdr_insrt_by_hdr_params_t) == sizeof(t_FmPcdManipHdrInsrtByHdrParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_hdr_insrt_ip_params_t) == sizeof(t_FmPcdManipHdrInsrtIpParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_hdr_insrt_t) == sizeof(t_FmPcdManipHdrInsrt));
-+    ASSERT_COND(sizeof(ioc_fm_manip_hdr_info_t) == sizeof(t_FmManipHdrInfo));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_hdr_rmv_by_hdr_params_t) == sizeof(t_FmPcdManipHdrRmvByHdrParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_special_offload_capwap_params_t) == sizeof(t_FmPcdManipSpecialOffloadCapwapParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_frag_capwap_stats_t) == sizeof(t_FmPcdManipFragCapwapStats));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_reassem_capwap_stats_t) == sizeof(t_FmPcdManipReassemCapwapStats));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_frag_params_t) == sizeof(t_FmPcdManipFragParams));
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+    ASSERT_COND(sizeof(ioc_fm_pcd_prs_label_params_t) == sizeof(t_FmPcdPrsLabelParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_prs_sw_params_t) == sizeof(t_FmPcdPrsSwParams));
-+    /*ioc_fm_pcd_kg_dflt_value_params_t : private */
-+    ASSERT_COND(sizeof(ioc_fm_pcd_hdr_protocol_opt_u) == sizeof(u_FmPcdHdrProtocolOpt));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_fields_u) == sizeof(t_FmPcdFields));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_from_hdr_t) == sizeof(t_FmPcdFromHdr));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_from_field_t) == sizeof(t_FmPcdFromField));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_distinction_unit_t) == sizeof(t_FmPcdDistinctionUnit));
-+
-+#if defined(CONFIG_ARM64)
-+    /* different alignment */
-+    ASSERT_COND(sizeof(ioc_fm_pcd_net_env_params_t) == sizeof(t_FmPcdNetEnvParams) + sizeof(void *) + 4);
-+#else
-+#if !defined(CONFIG_COMPAT)
-+    /* different alignment */
-+    ASSERT_COND(sizeof(ioc_fm_pcd_net_env_params_t) == sizeof(t_FmPcdNetEnvParams) + sizeof(void *));
-+#endif
-+#endif
-+    ASSERT_COND(sizeof(ioc_fm_pcd_extract_entry_t) == sizeof(t_FmPcdExtractEntry));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_kg_extract_mask_t) == sizeof(t_FmPcdKgExtractMask));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_kg_extract_dflt_t) == sizeof(t_FmPcdKgExtractDflt));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_kg_key_extract_and_hash_params_t) == sizeof(t_FmPcdKgKeyExtractAndHashParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_kg_extracted_or_params_t) == sizeof(t_FmPcdKgExtractedOrParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_kg_scheme_counter_t) == sizeof(t_FmPcdKgSchemeCounter));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_kg_plcr_profile_t) == sizeof(t_FmPcdKgPlcrProfile));
-+#if (DPAA_VERSION >= 11)
-+    ASSERT_COND(sizeof(ioc_fm_pcd_kg_storage_profile_t) == sizeof(t_FmPcdKgStorageProfile));
-+#endif
-+    ASSERT_COND(sizeof(ioc_fm_pcd_kg_cc_t) == sizeof(t_FmPcdKgCc));
-+#if !defined(CONFIG_COMPAT)
-+    /* different alignment */
-+    ASSERT_COND(sizeof(ioc_fm_pcd_kg_scheme_params_t) == sizeof(t_FmPcdKgSchemeParams) + sizeof(void *));
-+#endif
-+    ASSERT_COND(sizeof(ioc_fm_pcd_cc_next_cc_params_t) == sizeof(t_FmPcdCcNextCcParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_cc_next_plcr_params_t) == sizeof(t_FmPcdCcNextPlcrParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_cc_next_enqueue_params_t) == sizeof(t_FmPcdCcNextEnqueueParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_cc_next_kg_params_t) == sizeof(t_FmPcdCcNextKgParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_cc_next_engine_params_t) == sizeof(t_FmPcdCcNextEngineParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_cc_key_params_t) == sizeof(t_FmPcdCcKeyParams));
-+    ASSERT_COND(sizeof(ioc_keys_params_t) == sizeof(t_KeysParams));
-+#if !defined(CONFIG_COMPAT)
-+    /* different alignment */
-+    ASSERT_COND(sizeof(ioc_fm_pcd_cc_node_params_t) == sizeof(t_FmPcdCcNodeParams) + sizeof(void *));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_hash_table_params_t) == sizeof(t_FmPcdHashTableParams) + sizeof(void *));
-+#endif
-+    ASSERT_COND(sizeof(ioc_fm_pcd_cc_grp_params_t) == sizeof(t_FmPcdCcGrpParams));
-+#if !defined(CONFIG_COMPAT)
-+    /* different alignment */
-+    ASSERT_COND(sizeof(ioc_fm_pcd_cc_tree_params_t) == sizeof(t_FmPcdCcTreeParams) + sizeof(void *));
-+#endif
-+    ASSERT_COND(sizeof(ioc_fm_pcd_plcr_byte_rate_mode_param_t) == sizeof(t_FmPcdPlcrByteRateModeParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_plcr_non_passthrough_alg_param_t) == sizeof(t_FmPcdPlcrNonPassthroughAlgParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_plcr_next_engine_params_u) == sizeof(u_FmPcdPlcrNextEngineParams));
-+    /*ioc_fm_pcd_port_params_t : private */
-+    ASSERT_COND(sizeof(ioc_fm_pcd_plcr_profile_params_t) == sizeof(t_FmPcdPlcrProfileParams) + sizeof(void *));
-+    /*ioc_fm_pcd_cc_tree_modify_next_engine_params_t : private */
-+
-+#ifdef FM_CAPWAP_SUPPORT
-+#error TODO: unsupported feature
-+/*
-+    ASSERT_COND(sizeof(TODO) == sizeof(t_FmPcdManipHdrInsrtByTemplateParams));
-+    ASSERT_COND(sizeof(TODO) == sizeof(t_CapwapFragmentationParams));
-+    ASSERT_COND(sizeof(TODO) == sizeof(t_CapwapReassemblyParams));
-+*/
-+#endif
-+
-+    /*ioc_fm_pcd_cc_node_modify_next_engine_params_t : private */
-+    /*ioc_fm_pcd_cc_node_remove_key_params_t : private */
-+    /*ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t : private */
-+    /*ioc_fm_pcd_cc_node_modify_key_params_t : private */
-+    /*ioc_fm_manip_hdr_info_t : private */
-+    /*ioc_fm_pcd_hash_table_set_t : private */
-+
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_frag_ip_params_t) == sizeof(t_FmPcdManipFragIpParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_reassem_ip_params_t) == sizeof(t_FmPcdManipReassemIpParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_special_offload_ipsec_params_t) == sizeof(t_FmPcdManipSpecialOffloadIPSecParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_special_offload_params_t) == sizeof(t_FmPcdManipSpecialOffloadParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_hdr_rmv_generic_params_t) == sizeof(t_FmPcdManipHdrRmvGenericParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_hdr_insrt_generic_params_t) == sizeof(t_FmPcdManipHdrInsrtGenericParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_hdr_insrt_params_t) == sizeof(t_FmPcdManipHdrInsrtParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_hdr_rmv_params_t) == sizeof(t_FmPcdManipHdrRmvParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_hdr_params_t) == sizeof(t_FmPcdManipHdrParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_frag_params_t) == sizeof(t_FmPcdManipFragParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_reassem_params_t) == sizeof(t_FmPcdManipReassemParams));
-+#if !defined(CONFIG_COMPAT)
-+    /* different alignment */
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_params_t) == sizeof(t_FmPcdManipParams) + sizeof(void *));
-+#endif
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_reassem_ip_stats_t) == sizeof(t_FmPcdManipReassemIpStats));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_frag_ip_stats_t) == sizeof(t_FmPcdManipFragIpStats));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_reassem_stats_t) == sizeof(t_FmPcdManipReassemStats));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_frag_stats_t) == sizeof(t_FmPcdManipFragStats));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_manip_stats_t) == sizeof(t_FmPcdManipStats));
-+#if DPAA_VERSION >= 11
-+    ASSERT_COND(sizeof(ioc_fm_pcd_frm_replic_group_params_t) == sizeof(t_FmPcdFrmReplicGroupParams) + sizeof(void *));
-+#endif
-+
-+    /* fm_port_ext.h == fm_port_ioctls.h */
-+    ASSERT_COND(sizeof(ioc_fm_port_rate_limit_t) == sizeof(t_FmPortRateLimit));
-+    ASSERT_COND(sizeof(ioc_fm_port_pcd_params_t) == sizeof(t_FmPortPcdParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_kg_scheme_select_t) == sizeof(t_FmPcdKgSchemeSelect));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_port_schemes_params_t) == sizeof(t_FmPcdPortSchemesParams));
-+    ASSERT_COND(sizeof(ioc_fm_pcd_prs_start_t) == sizeof(t_FmPcdPrsStart));
-+
-+    return;
-+}
-+
-+#define ASSERT_IOC_NET_ENUM(def) ASSERT_COND((unsigned long)e_IOC_NET_##def == (unsigned long)def)
-+
-+void LnxWrpPCDIOCTLEnumChecking(void)
-+{
-+    /* net_ext.h == net_ioctls.h : sampling checks */
-+    ASSERT_IOC_NET_ENUM(HEADER_TYPE_MACSEC);
-+    ASSERT_IOC_NET_ENUM(HEADER_TYPE_PPP);
-+    ASSERT_IOC_NET_ENUM(MAX_HEADER_TYPE_COUNT);
-+
-+    /* fm_ext.h == fm_ioctls.h */
-+    ASSERT_COND((unsigned long)e_IOC_FM_PORT_TYPE_DUMMY == (unsigned long)e_FM_PORT_TYPE_DUMMY);
-+    ASSERT_COND((unsigned long)e_IOC_EX_MURAM_ECC == (unsigned long)e_FM_EX_MURAM_ECC);
-+    ASSERT_COND((unsigned long)e_IOC_FM_COUNTERS_DEQ_CONFIRM == (unsigned long)e_FM_COUNTERS_DEQ_CONFIRM);
-+
-+    /* fm_pcd_ext.h == fm_pcd_ioctls.h */
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_PRS_COUNTERS_FPM_COMMAND_STALL_CYCLES == (unsigned long)e_FM_PCD_PRS_COUNTERS_FPM_COMMAND_STALL_CYCLES);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_PRS_EXCEPTION_SINGLE_ECC == (unsigned long)e_FM_PCD_PRS_EXCEPTION_SINGLE_ECC);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_PRS == (unsigned long)e_FM_PCD_PRS);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_EXTRACT_FULL_FIELD == (unsigned long)e_FM_PCD_EXTRACT_FULL_FIELD);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_EXTRACT_FROM_FLOW_ID == (unsigned long)e_FM_PCD_EXTRACT_FROM_FLOW_ID);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_KG_EXTRACT_PORT_PRIVATE_INFO == (unsigned long)e_FM_PCD_KG_EXTRACT_PORT_PRIVATE_INFO);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_KG_DFLT_ILLEGAL == (unsigned long)e_FM_PCD_KG_DFLT_ILLEGAL);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_KG_GENERIC_NOT_FROM_DATA == (unsigned long)e_FM_PCD_KG_GENERIC_NOT_FROM_DATA);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_HDR_INDEX_LAST == (unsigned long)e_FM_PCD_HDR_INDEX_LAST);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_PLCR_SHARED == (unsigned long)e_FM_PCD_PLCR_SHARED);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_PLCR_RFC_4115 == (unsigned long)e_FM_PCD_PLCR_RFC_4115);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_PLCR_COLOR_AWARE == (unsigned long)e_FM_PCD_PLCR_COLOR_AWARE);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_PLCR_OVERRIDE == (unsigned long)e_FM_PCD_PLCR_OVERRIDE);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_PLCR_FULL_FRM_LEN == (unsigned long)e_FM_PCD_PLCR_FULL_FRM_LEN);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_PLCR_ROLLBACK_FULL_FRM_LEN == (unsigned long)e_FM_PCD_PLCR_ROLLBACK_FULL_FRM_LEN);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_PLCR_PACKET_MODE == (unsigned long)e_FM_PCD_PLCR_PACKET_MODE);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_DROP_FRAME == (unsigned long)e_FM_PCD_DROP_FRAME);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_PLCR_PROFILE_RECOLOURED_RED_PACKET_TOTAL_COUNTER == (unsigned long)e_FM_PCD_PLCR_PROFILE_RECOLOURED_RED_PACKET_TOTAL_COUNTER);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP == (unsigned long)e_FM_PCD_ACTION_INDEXED_LOOKUP);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR == (unsigned long)e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR);
-+#if !defined(FM_CAPWAP_SUPPORT)
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_MANIP_INSRT_GENERIC == (unsigned long)e_FM_PCD_MANIP_INSRT_GENERIC);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_MANIP_RMV_GENERIC == (unsigned long)e_FM_PCD_MANIP_RMV_GENERIC);
-+#else
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_MANIP_INSRT_BY_TEMPLATE == (unsigned long)e_FM_PCD_MANIP_INSRT_BY_TEMPLATE);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_MANIP_RMV_BY_HDR == (unsigned long)e_FM_PCD_MANIP_RMV_BY_HDR);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_MANIP_RMV_BY_HDR_FROM_START == (unsigned long)e_FM_PCD_MANIP_RMV_BY_HDR_FROM_START);
-+#endif
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAG == (unsigned long)e_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAG);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_MANIP_EIGHT_WAYS_HASH == (unsigned long)e_FM_PCD_MANIP_EIGHT_WAYS_HASH);
-+
-+#ifdef FM_CAPWAP_SUPPORT
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_STATS_PER_FLOWID == (unsigned long)e_FM_PCD_STATS_PER_FLOWID);
-+#endif
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD == (unsigned long)e_FM_PCD_MANIP_SPECIAL_OFFLOAD);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_CC_STATS_MODE_FRAME == (unsigned long)e_FM_PCD_CC_STATS_MODE_FRAME);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_MANIP_CONTINUE_WITHOUT_FRAG == (unsigned long)e_FM_PCD_MANIP_CONTINUE_WITHOUT_FRAG);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD_IPSEC == (unsigned long)e_FM_PCD_MANIP_SPECIAL_OFFLOAD_IPSEC);
-+
-+    /* fm_port_ext.h == fm_port_ioctls.h */
-+#if !defined(FM_CAPWAP_SUPPORT)
-+    ASSERT_COND((unsigned long)e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR == (unsigned long)e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR);
-+#else
-+    ASSERT_COND((unsigned long)e_IOC_FM_PORT_PCD_SUPPORT_CC_AND_KG_AND_PLCR == (unsigned long)e_FM_PORT_PCD_SUPPORT_CC_AND_KG_AND_PLCR);
-+#endif
-+    ASSERT_COND((unsigned long)e_IOC_FM_PORT_COUNTERS_DEQ_CONFIRM == (unsigned long)e_FM_PORT_COUNTERS_DEQ_CONFIRM);
-+    ASSERT_COND((unsigned long)e_IOC_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_8 == (unsigned long)e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_8);
-+
-+    return;
-+}
-+
-+static t_Error LnxwrpFmPcdIOCTL(t_LnxWrpFmDev *p_LnxWrpFmDev, unsigned int cmd, unsigned long arg, bool compat)
-+{
-+    t_Error err = E_OK;
-+
-+/*
-+Status: PCD API to fmlib (file: drivers/net/dpa/NetCommSw/inc/Peripherals/fm_pcd_ext.h):
-+
-+    FM_PCD_PrsLoadSw
-+    FM_PCD_SetAdvancedOffloadSupport
-+    FM_PCD_Enable
-+    FM_PCD_Disable
-+    FM_PCD_ForceIntr
-+    FM_PCD_SetException
-+    FM_PCD_KgSetAdditionalDataAfterParsing
-+    FM_PCD_KgSetDfltValue
-+    FM_PCD_NetEnvCharacteristicsSet
-+    FM_PCD_NetEnvCharacteristicsDelete
-+    FM_PCD_KgSchemeSet
-+    FM_PCD_KgSchemeDelete
-+    FM_PCD_MatchTableSet
-+    FM_PCD_MatchTableDelete
-+    FM_PCD_CcRootBuild
-+    FM_PCD_CcRootDelete
-+    FM_PCD_PlcrProfileSet
-+    FM_PCD_PlcrProfileDelete
-+    FM_PCD_CcRootModifyNextEngine
-+    FM_PCD_MatchTableModifyNextEngine
-+    FM_PCD_MatchTableModifyMissNextEngine
-+    FM_PCD_MatchTableRemoveKey
-+    FM_PCD_MatchTableAddKey
-+    FM_PCD_MatchTableModifyKeyAndNextEngine
-+    FM_PCD_HashTableSet
-+    FM_PCD_HashTableDelete
-+    FM_PCD_HashTableAddKey
-+    FM_PCD_HashTableRemoveKey
-+    FM_PCD_MatchTableModifyKey
-+    FM_PCD_ManipNodeReplace
-+    FM_PCD_ManipNodeSet
-+    FM_PCD_ManipNodeDelete
-+
-+Status: not exported, should be thru sysfs
-+    FM_PCD_KgSchemeGetCounter
-+    FM_PCD_KgSchemeSetCounter
-+    FM_PCD_PlcrProfileGetCounter
-+    FM_PCD_PlcrProfileSetCounter
-+
-+Status: not exported
-+    FM_PCD_MatchTableFindNRemoveKey
-+    FM_PCD_MatchTableFindNModifyNextEngine
-+    FM_PCD_MatchTableFindNModifyKeyAndNextEngine
-+    FM_PCD_MatchTableFindNModifyKey
-+    FM_PCD_MatchTableGetIndexedHashBucket
-+    FM_PCD_MatchTableGetNextEngine
-+    FM_PCD_MatchTableGetKeyCounter
-+
-+Status: not exported, would be nice to have
-+    FM_PCD_HashTableModifyNextEngine
-+    FM_PCD_HashTableModifyMissNextEngine
-+    FM_PCD_HashTableGetMissNextEngine
-+    FM_PCD_ManipGetStatistics
-+
-+Status: not exported
-+#if DPAA_VERSION >= 11
-+
-+    FM_VSP_GetStatistics -- it's not available yet
-+#endif
-+
-+Status: feature not supported
-+#ifdef FM_CAPWAP_SUPPORT
-+#error unsupported feature
-+    FM_PCD_StatisticsSetNode
-+#endif
-+
-+ */
-+    _fm_ioctl_dbg("cmd:0x%08x(type:0x%02x, nr:%u).\n",
-+            cmd, _IOC_TYPE(cmd), _IOC_NR(cmd) - 20);
-+
-+    switch (cmd)
-+    {
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_PRS_LOAD_SW_COMPAT:
-+#endif
-+        case FM_PCD_IOC_PRS_LOAD_SW:
-+        {
-+            ioc_fm_pcd_prs_sw_params_t *param;
-+            uint8_t                    *p_code;
-+
-+            param = (ioc_fm_pcd_prs_sw_params_t *) XX_Malloc(sizeof(ioc_fm_pcd_prs_sw_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_prs_sw_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_prs_sw_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_prs_sw_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_prs_sw_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_prs_sw_params_t));
-+                if (copy_from_user(compat_param,
-+                            (ioc_compat_fm_pcd_prs_sw_params_t *) compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_prs_sw_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_fm_pcd_prs_sw(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_prs_sw_params_t *)arg,
-+                            sizeof(ioc_fm_pcd_prs_sw_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            if (!param->p_code || !param->size)
-+            {
-+                XX_Free(param);
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            p_code = (uint8_t *) XX_Malloc(param->size);
-+            if (!p_code)
-+            {
-+                XX_Free(param);
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+            }
-+
-+            memset(p_code, 0, param->size);
-+            if (copy_from_user(p_code, param->p_code, param->size))
-+            {
-+                XX_Free(p_code);
-+                XX_Free(param);
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            param->p_code = p_code;
-+
-+            err = FM_PCD_PrsLoadSw(p_LnxWrpFmDev->h_PcdDev, (t_FmPcdPrsSwParams*)param);
-+
-+            XX_Free(p_code);
-+            XX_Free(param);
-+            break;
-+        }
-+
-+        case FM_PCD_IOC_SET_ADVANCED_OFFLOAD_SUPPORT:
-+            err = FM_PCD_SetAdvancedOffloadSupport(p_LnxWrpFmDev->h_PcdDev);
-+            break;
-+
-+        case FM_PCD_IOC_ENABLE:
-+            err = FM_PCD_Enable(p_LnxWrpFmDev->h_PcdDev);
-+            break;
-+
-+        case FM_PCD_IOC_DISABLE:
-+            err = FM_PCD_Disable(p_LnxWrpFmDev->h_PcdDev);
-+            break;
-+
-+        case FM_PCD_IOC_FORCE_INTR:
-+        {
-+            int exception;
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (get_user(exception, (int *) compat_ptr(arg)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+            else
-+#endif
-+            {
-+                if (get_user(exception, (int *)arg))
-+                   RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            err = FM_PCD_ForceIntr(p_LnxWrpFmDev->h_PcdDev, (e_FmPcdExceptions)exception);
-+            break;
-+        }
-+
-+        case FM_PCD_IOC_SET_EXCEPTION:
-+        {
-+            ioc_fm_pcd_exception_params_t *param;
-+
-+            param = (ioc_fm_pcd_exception_params_t *) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_exception_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_exception_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_exception_params_t *)compat_ptr(arg),
-+                                    sizeof(ioc_fm_pcd_exception_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_exception_params_t *)arg,
-+                                    sizeof(ioc_fm_pcd_exception_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            err = FM_PCD_SetException(p_LnxWrpFmDev->h_PcdDev, param->exception, param->enable);
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+        case FM_PCD_IOC_KG_SET_ADDITIONAL_DATA_AFTER_PARSING:
-+        {
-+            uint8_t payloadOffset;
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (get_user(payloadOffset, (uint8_t*) compat_ptr(arg)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+            else
-+#endif
-+            {
-+                if (get_user(payloadOffset, (uint8_t*) arg))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            err = FM_PCD_KgSetAdditionalDataAfterParsing(p_LnxWrpFmDev->h_PcdDev, payloadOffset);
-+            break;
-+        }
-+
-+        case FM_PCD_IOC_KG_SET_DFLT_VALUE:
-+        {
-+            ioc_fm_pcd_kg_dflt_value_params_t *param;
-+
-+            param = (ioc_fm_pcd_kg_dflt_value_params_t *) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_kg_dflt_value_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_kg_dflt_value_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_kg_dflt_value_params_t *)compat_ptr(arg),
-+                                    sizeof(ioc_fm_pcd_kg_dflt_value_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_kg_dflt_value_params_t *)arg,
-+                                    sizeof(ioc_fm_pcd_kg_dflt_value_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            err = FM_PCD_KgSetDfltValue(p_LnxWrpFmDev->h_PcdDev, param->valueId, param->value);
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET_COMPAT:
-+#endif
-+        case FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET:
-+        {
-+            ioc_fm_pcd_net_env_params_t  *param;
-+
-+            param = (ioc_fm_pcd_net_env_params_t *) XX_Malloc(sizeof(ioc_fm_pcd_net_env_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_net_env_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_net_env_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_net_env_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_net_env_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_net_env_params_t));
-+                if (copy_from_user(compat_param, (ioc_compat_fm_pcd_net_env_params_t *) compat_ptr(arg),
-+                                    sizeof(ioc_compat_fm_pcd_net_env_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_net_env(compat_param, param, COMPAT_US_TO_K);
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_net_env_params_t *) arg,
-+                            sizeof(ioc_fm_pcd_net_env_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            param->id = FM_PCD_NetEnvCharacteristicsSet(p_LnxWrpFmDev->h_PcdDev, (t_FmPcdNetEnvParams*)param);
-+
-+            if (!param->id)
-+            {
-+                XX_Free(param);
-+                err = E_INVALID_VALUE;
-+                /* Since the LLD has no errno-style error reporting,
-+                   we're left here with no other option than to report
-+                   a generic E_INVALID_VALUE */
-+                break;
-+            }
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_net_env_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_net_env_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_net_env_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_net_env_params_t));
-+                compat_copy_fm_pcd_net_env(compat_param, param, COMPAT_K_TO_US);
-+
-+                if (copy_to_user((ioc_compat_fm_pcd_net_env_params_t *) compat_ptr(arg),
-+                            compat_param,
-+                            sizeof(ioc_compat_fm_pcd_net_env_params_t)))
-+                    err = E_READ_FAILED;
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_to_user((ioc_fm_pcd_net_env_params_t *)arg,
-+                            param,
-+                            sizeof(ioc_fm_pcd_net_env_params_t)))
-+                    err = E_READ_FAILED;
-+            }
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE_COMPAT:
-+#endif
-+        case FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE:
-+        {
-+            ioc_fm_obj_t id;
-+
-+            memset(&id, 0 , sizeof(ioc_fm_obj_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_obj_t compat_id;
-+
-+                if (copy_from_user(&compat_id, (ioc_compat_fm_obj_t *) compat_ptr(arg), sizeof(ioc_compat_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+                compat_obj_delete(&compat_id, &id);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(&id, (ioc_fm_obj_t *) arg, sizeof(ioc_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            err = FM_PCD_NetEnvCharacteristicsDelete(id.obj);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_KG_SCHEME_SET_COMPAT:
-+#endif
-+        case FM_PCD_IOC_KG_SCHEME_SET:
-+        {
-+            ioc_fm_pcd_kg_scheme_params_t *param;
-+
-+            param = (ioc_fm_pcd_kg_scheme_params_t *) XX_Malloc(sizeof(ioc_fm_pcd_kg_scheme_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_kg_scheme_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_kg_scheme_params_t *compat_param = NULL;
-+
-+                compat_param = (ioc_compat_fm_pcd_kg_scheme_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_kg_scheme_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_kg_scheme_params_t));
-+
-+                if (copy_from_user(compat_param, (ioc_compat_fm_pcd_kg_scheme_params_t *) compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_kg_scheme_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_kg_scheme(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_kg_scheme_params_t *)arg,
-+                            sizeof(ioc_fm_pcd_kg_scheme_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            param->id = FM_PCD_KgSchemeSet(p_LnxWrpFmDev->h_PcdDev, (t_FmPcdKgSchemeParams*)param);
-+
-+            if (!param->id)
-+            {
-+                XX_Free(param);
-+                err = E_INVALID_VALUE;
-+                /* Since the LLD has no errno-style error reporting,
-+                   we're left here with no other option than to report
-+                   a generic E_INVALID_VALUE */
-+                break;
-+            }
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_kg_scheme_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_kg_scheme_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_kg_scheme_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_kg_scheme_params_t));
-+                compat_copy_fm_pcd_kg_scheme(compat_param, param, COMPAT_K_TO_US);
-+                if (copy_to_user((ioc_compat_fm_pcd_kg_scheme_params_t *)compat_ptr(arg),
-+                            compat_param,
-+                            sizeof(ioc_compat_fm_pcd_kg_scheme_params_t)))
-+                    err = E_READ_FAILED;
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_to_user((ioc_fm_pcd_kg_scheme_params_t *)arg,
-+                            param,
-+                            sizeof(ioc_fm_pcd_kg_scheme_params_t)))
-+                    err = E_READ_FAILED;
-+            }
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_KG_SCHEME_GET_CNTR_COMPAT:
-+#endif
-+        case FM_PCD_IOC_KG_SCHEME_GET_CNTR:
-+        {
-+            ioc_fm_pcd_kg_scheme_spc_t *param;
-+
-+            param = (ioc_fm_pcd_kg_scheme_spc_t *) XX_Malloc(sizeof(ioc_fm_pcd_kg_scheme_spc_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_kg_scheme_spc_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_kg_scheme_spc_t *compat_param = NULL;
-+
-+                compat_param = (ioc_compat_fm_pcd_kg_scheme_spc_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_kg_scheme_spc_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_kg_scheme_spc_t));
-+
-+                if (copy_from_user(compat_param, (ioc_compat_fm_pcd_kg_scheme_spc_t *) compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_kg_scheme_spc_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_kg_scheme_spc(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_kg_scheme_spc_t *)arg,
-+                            sizeof(ioc_fm_pcd_kg_scheme_spc_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            param->val = FM_PCD_KgSchemeGetCounter((t_Handle)param->id);
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_kg_scheme_spc_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_kg_scheme_spc_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_kg_scheme_spc_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_kg_scheme_spc_t));
-+                compat_copy_fm_pcd_kg_scheme_spc(compat_param, param, COMPAT_K_TO_US);
-+                if (copy_to_user((ioc_compat_fm_pcd_kg_scheme_spc_t *)compat_ptr(arg),
-+                            compat_param,
-+                            sizeof(ioc_compat_fm_pcd_kg_scheme_spc_t)))
-+                    err = E_READ_FAILED;
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_to_user((ioc_fm_pcd_kg_scheme_spc_t *)arg,
-+                            param,
-+                            sizeof(ioc_fm_pcd_kg_scheme_spc_t)))
-+                    err = E_READ_FAILED;
-+            }
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_KG_SCHEME_DELETE_COMPAT:
-+#endif
-+        case FM_PCD_IOC_KG_SCHEME_DELETE:
-+        {
-+            ioc_fm_obj_t id;
-+
-+            memset(&id, 0 , sizeof(ioc_fm_obj_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_obj_t compat_id;
-+
-+                if (copy_from_user(&compat_id, (ioc_compat_fm_obj_t *) compat_ptr(arg), sizeof(ioc_compat_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+                compat_obj_delete(&compat_id, &id);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(&id, (ioc_fm_obj_t *) arg, sizeof(ioc_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            err = FM_PCD_KgSchemeDelete(id.obj);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_MATCH_TABLE_SET_COMPAT:
-+#endif
-+        case FM_PCD_IOC_MATCH_TABLE_SET:
-+        {
-+            ioc_fm_pcd_cc_node_params_t *param;
-+            uint8_t                     *keys;
-+            uint8_t                     *masks;
-+            int                         i,k;
-+
-+            param = (ioc_fm_pcd_cc_node_params_t *) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_cc_node_params_t) +
-+                    2 * IOC_FM_PCD_MAX_NUM_OF_KEYS * IOC_FM_PCD_MAX_SIZE_OF_KEY);
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_cc_node_params_t) +
-+                    2 * IOC_FM_PCD_MAX_NUM_OF_KEYS * IOC_FM_PCD_MAX_SIZE_OF_KEY);
-+
-+            keys = (uint8_t *) (param + 1);
-+            masks = keys + IOC_FM_PCD_MAX_NUM_OF_KEYS * IOC_FM_PCD_MAX_SIZE_OF_KEY;
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_node_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_node_params_t *) XX_Malloc(
-+                                    sizeof(ioc_compat_fm_pcd_cc_node_params_t) +
-+                                    2 * IOC_FM_PCD_MAX_NUM_OF_KEYS * IOC_FM_PCD_MAX_SIZE_OF_KEY);
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_node_params_t) +
-+                        2 * IOC_FM_PCD_MAX_NUM_OF_KEYS * IOC_FM_PCD_MAX_SIZE_OF_KEY);
-+
-+                if (copy_from_user(compat_param,
-+                            (ioc_compat_fm_pcd_cc_node_params_t *)compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_cc_node_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_cc_node(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_cc_node_params_t *)arg, sizeof(ioc_fm_pcd_cc_node_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            ASSERT_COND(param->keys_params.num_of_keys <= IOC_FM_PCD_MAX_NUM_OF_KEYS);
-+            ASSERT_COND(param->keys_params.key_size <= IOC_FM_PCD_MAX_SIZE_OF_KEY);
-+
-+            /* support for indexed lookup */
-+            if( !(param->extract_cc_params.type == e_IOC_FM_PCD_EXTRACT_NON_HDR &&
-+                  param->extract_cc_params.extract_params.extract_non_hdr.src == e_IOC_FM_PCD_EXTRACT_FROM_HASH &&
-+                  param->extract_cc_params.extract_params.extract_non_hdr.action == e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP))
-+            {
-+                for (i=0, k=0;
-+                     i < param->keys_params.num_of_keys;
-+                     i++, k += IOC_FM_PCD_MAX_SIZE_OF_KEY)
-+                {
-+                    if (param->keys_params.key_params[i].p_key &&
-+                            param->keys_params.key_size)
-+                    {
-+                        if (copy_from_user(&keys[k],
-+                                    param->keys_params.key_params[i].p_key,
-+                                    param->keys_params.key_size))
-+                        {
-+                            XX_Free(param);
-+                            RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                        }
-+
-+                        param->keys_params.key_params[i].p_key = &keys[k];
-+                    }
-+
-+                    if (param->keys_params.key_params[i].p_mask)
-+                    {
-+                        if (copy_from_user(&masks[k],
-+                                    param->keys_params.key_params[i].p_mask,
-+                                    param->keys_params.key_size))
-+                        {
-+                            XX_Free(param);
-+                            RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                        }
-+
-+                        param->keys_params.key_params[i].p_mask = &masks[k];
-+                    }
-+                }
-+            }
-+
-+            param->id = FM_PCD_MatchTableSet(p_LnxWrpFmDev->h_PcdDev, (t_FmPcdCcNodeParams*)param);
-+
-+            if (!param->id) {
-+                XX_Free(param);
-+                err = E_INVALID_VALUE;
-+                /* Since the LLD has no errno-style error reporting,
-+                   we're left here with no other option than to report
-+                   a generic E_INVALID_VALUE */
-+                break;
-+            }
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_node_params_t *compat_param;
-+                compat_param = (ioc_compat_fm_pcd_cc_node_params_t *) XX_Malloc(
-+                                            sizeof(ioc_compat_fm_pcd_cc_node_params_t) +
-+                                            2 * IOC_FM_PCD_MAX_NUM_OF_KEYS * IOC_FM_PCD_MAX_SIZE_OF_KEY);
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_node_params_t) +
-+                        2 * IOC_FM_PCD_MAX_NUM_OF_KEYS * IOC_FM_PCD_MAX_SIZE_OF_KEY);
-+                compat_copy_fm_pcd_cc_node(compat_param, param, COMPAT_K_TO_US);
-+
-+                if (copy_to_user((ioc_compat_fm_pcd_cc_node_params_t *)compat_ptr(arg),
-+                            compat_param,
-+                            sizeof(ioc_compat_fm_pcd_cc_node_params_t)))
-+                    err = E_READ_FAILED;
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_to_user((ioc_fm_pcd_cc_node_params_t *)arg,
-+                            param,
-+                            sizeof(ioc_fm_pcd_cc_node_params_t)))
-+                    err = E_READ_FAILED;
-+            }
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_MATCH_TABLE_DELETE_COMPAT:
-+#endif
-+        case FM_PCD_IOC_MATCH_TABLE_DELETE:
-+        {
-+            ioc_fm_obj_t id;
-+
-+            memset(&id, 0 , sizeof(ioc_fm_obj_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_obj_t compat_id;
-+
-+                if (copy_from_user(&compat_id, (ioc_compat_fm_obj_t *) compat_ptr(arg), sizeof(ioc_compat_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+                compat_obj_delete(&compat_id, &id);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(&id, (ioc_fm_obj_t *) arg, sizeof(ioc_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            err = FM_PCD_MatchTableDelete(id.obj);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_CC_ROOT_BUILD_COMPAT:
-+#endif
-+        case FM_PCD_IOC_CC_ROOT_BUILD:
-+        {
-+            ioc_fm_pcd_cc_tree_params_t *param;
-+
-+            param = (ioc_fm_pcd_cc_tree_params_t *) XX_Malloc(sizeof(ioc_fm_pcd_cc_tree_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_cc_tree_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_tree_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_tree_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_cc_tree_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_tree_params_t));
-+                if (copy_from_user(compat_param,
-+                            (ioc_compat_fm_pcd_cc_tree_params_t *)compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_cc_tree_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_cc_tree(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_cc_tree_params_t *)arg,
-+                            sizeof(ioc_fm_pcd_cc_tree_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            param->id = FM_PCD_CcRootBuild(p_LnxWrpFmDev->h_PcdDev, (t_FmPcdCcTreeParams*)param);
-+
-+            if (!param->id) {
-+                XX_Free(param);
-+                err = E_INVALID_VALUE;
-+                /* Since the LLD has no errno-style error reporting,
-+                   we're left here with no other option than to report
-+                   a generic E_INVALID_VALUE */
-+                break;
-+            }
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_tree_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_tree_params_t *) XX_Malloc(sizeof(ioc_compat_fm_pcd_cc_tree_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_tree_params_t));
-+
-+                compat_copy_fm_pcd_cc_tree(compat_param, param, COMPAT_K_TO_US);
-+
-+                if (copy_to_user((ioc_compat_fm_pcd_cc_tree_params_t *)compat_ptr(arg),
-+                            compat_param,
-+                            sizeof(ioc_compat_fm_pcd_cc_tree_params_t)))
-+                    err = E_READ_FAILED;
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_to_user((ioc_fm_pcd_cc_tree_params_t *)arg,
-+                            param,
-+                            sizeof(ioc_fm_pcd_cc_tree_params_t)))
-+                    err = E_READ_FAILED;
-+            }
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_CC_ROOT_DELETE_COMPAT:
-+#endif
-+        case FM_PCD_IOC_CC_ROOT_DELETE:
-+        {
-+            ioc_fm_obj_t id;
-+
-+            memset(&id, 0 , sizeof(ioc_fm_obj_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_obj_t compat_id;
-+
-+                if (copy_from_user(&compat_id, (ioc_compat_fm_obj_t *) compat_ptr(arg), sizeof(ioc_compat_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+                compat_obj_delete(&compat_id, &id);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(&id, (ioc_fm_obj_t *) arg, sizeof(ioc_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            err = FM_PCD_CcRootDelete(id.obj);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_PLCR_PROFILE_SET_COMPAT:
-+#endif
-+        case FM_PCD_IOC_PLCR_PROFILE_SET:
-+        {
-+            ioc_fm_pcd_plcr_profile_params_t *param;
-+
-+            param = (ioc_fm_pcd_plcr_profile_params_t *) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_plcr_profile_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_plcr_profile_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_plcr_profile_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_plcr_profile_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_plcr_profile_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_plcr_profile_params_t));
-+                if (copy_from_user(compat_param, (
-+                            ioc_compat_fm_pcd_plcr_profile_params_t *)compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_plcr_profile_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_plcr_profile(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_plcr_profile_params_t *)arg,
-+                                    sizeof(ioc_fm_pcd_plcr_profile_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            if (!param->modify &&
-+                (((t_FmPcdPlcrProfileParams*)param)->id.newParams.profileType != e_FM_PCD_PLCR_SHARED))
-+            {
-+                t_Handle h_Port;
-+                ioc_fm_pcd_port_params_t *port_params;
-+
-+                port_params = (ioc_fm_pcd_port_params_t*) XX_Malloc(sizeof(ioc_fm_pcd_port_params_t));
-+                if (!port_params)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(port_params, 0, sizeof(ioc_fm_pcd_port_params_t));
-+                if (copy_from_user(port_params, (ioc_fm_pcd_port_params_t*)((t_FmPcdPlcrProfileParams*)param)->id.newParams.h_FmPort,
-+                            sizeof(ioc_fm_pcd_port_params_t)))
-+                {
-+                    XX_Free(port_params);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                switch(port_params->port_type)
-+                {
-+                    case (e_IOC_FM_PORT_TYPE_RX):
-+                        if (port_params->port_id < FM_MAX_NUM_OF_1G_RX_PORTS) {
-+                            h_Port = p_LnxWrpFmDev->rxPorts[port_params->port_id].h_Dev;
-+                            break;
-+                        }
-+                        goto invalid_port_id;
-+
-+                    case (e_IOC_FM_PORT_TYPE_RX_10G):
-+                        if (port_params->port_id < FM_MAX_NUM_OF_10G_RX_PORTS) {
-+#ifndef CONFIG_FMAN_ARM
-+                            if (IS_T1023_T1024) {
-+                                h_Port = p_LnxWrpFmDev->rxPorts[port_params->port_id].h_Dev;
-+                            } else {
-+#else
-+                            {
-+#endif
-+                                h_Port = p_LnxWrpFmDev->rxPorts[port_params->port_id + FM_MAX_NUM_OF_1G_RX_PORTS].h_Dev;
-+                            }
-+                            break;
-+                        }
-+                        goto invalid_port_id;
-+
-+                    case (e_IOC_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+                        if (port_params->port_id && port_params->port_id < FM_MAX_NUM_OF_OH_PORTS) {
-+                            h_Port = p_LnxWrpFmDev->opPorts[port_params->port_id - 1].h_Dev;
-+                            break;
-+                        }
-+                        goto invalid_port_id;
-+
-+                    default:
-+invalid_port_id:
-+                        XX_Free(port_params);
-+                        XX_Free(param);
-+                        RETURN_ERROR(MINOR, E_INVALID_SELECTION, NO_MSG);
-+                }
-+
-+                ((t_FmPcdPlcrProfileParams*)param)->id.newParams.h_FmPort = h_Port;
-+                XX_Free(port_params);
-+            }
-+
-+            param->id = FM_PCD_PlcrProfileSet(p_LnxWrpFmDev->h_PcdDev, (t_FmPcdPlcrProfileParams*)param);
-+
-+            if (!param->id) {
-+                XX_Free(param);
-+                err = E_INVALID_VALUE;
-+                /* Since the LLD has no errno-style error reporting,
-+                   we're left here with no other option than to report
-+                   a generic E_INVALID_VALUE */
-+                break;
-+            }
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_plcr_profile_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_plcr_profile_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_plcr_profile_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_plcr_profile_params_t));
-+                compat_copy_fm_pcd_plcr_profile(compat_param, param, COMPAT_K_TO_US);
-+                if (copy_to_user((ioc_compat_fm_pcd_plcr_profile_params_t *) compat_ptr(arg),
-+                            compat_param,
-+                            sizeof(ioc_compat_fm_pcd_plcr_profile_params_t)))
-+                    err = E_READ_FAILED;
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_to_user((ioc_fm_pcd_plcr_profile_params_t *)arg,
-+                            param,
-+                            sizeof(ioc_fm_pcd_plcr_profile_params_t)))
-+                    err = E_READ_FAILED;
-+            }
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_PLCR_PROFILE_DELETE_COMPAT:
-+#endif
-+        case FM_PCD_IOC_PLCR_PROFILE_DELETE:
-+        {
-+            ioc_fm_obj_t id;
-+
-+            memset(&id, 0 , sizeof(ioc_fm_obj_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_obj_t compat_id;
-+
-+                if (copy_from_user(&compat_id, (ioc_compat_fm_obj_t *) compat_ptr(arg), sizeof(ioc_compat_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+                compat_obj_delete(&compat_id, &id);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(&id, (ioc_fm_obj_t *) arg, sizeof(ioc_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            err = FM_PCD_PlcrProfileDelete(id.obj);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_CC_ROOT_MODIFY_NEXT_ENGINE_COMPAT:
-+#endif
-+        case FM_PCD_IOC_CC_ROOT_MODIFY_NEXT_ENGINE:
-+        {
-+            ioc_fm_pcd_cc_tree_modify_next_engine_params_t *param;
-+
-+            param = (ioc_fm_pcd_cc_tree_modify_next_engine_params_t *) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_cc_tree_modify_next_engine_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_cc_tree_modify_next_engine_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_tree_modify_next_engine_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_tree_modify_next_engine_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_cc_tree_modify_next_engine_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_tree_modify_next_engine_params_t));
-+                if (copy_from_user(compat_param, (ioc_compat_fm_pcd_cc_tree_modify_next_engine_params_t *) compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_cc_tree_modify_next_engine_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_fm_pcd_cc_tree_modify_next_engine(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_cc_tree_modify_next_engine_params_t *)arg,
-+                            sizeof(ioc_fm_pcd_cc_tree_modify_next_engine_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            err = FM_PCD_CcRootModifyNextEngine(param->id,
-+                                                param->grp_indx,
-+                                                param->indx,
-+                                                (t_FmPcdCcNextEngineParams*)(&param->cc_next_engine_params));
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_MATCH_TABLE_MODIFY_NEXT_ENGINE_COMPAT:
-+#endif
-+        case FM_PCD_IOC_MATCH_TABLE_MODIFY_NEXT_ENGINE:
-+        {
-+            ioc_fm_pcd_cc_node_modify_next_engine_params_t *param;
-+
-+            param = (ioc_fm_pcd_cc_node_modify_next_engine_params_t *) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_cc_node_modify_next_engine_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_cc_node_modify_next_engine_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t));
-+                if (copy_from_user(compat_param, (ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t *) compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_cc_node_modify_next_engine(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_cc_node_modify_next_engine_params_t *)arg,
-+                            sizeof(ioc_fm_pcd_cc_node_modify_next_engine_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            err = FM_PCD_MatchTableModifyNextEngine(param->id,
-+                    param->key_indx,
-+                    (t_FmPcdCcNextEngineParams*)(&param->cc_next_engine_params));
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_MATCH_TABLE_MODIFY_MISS_NEXT_ENGINE_COMPAT:
-+#endif
-+        case FM_PCD_IOC_MATCH_TABLE_MODIFY_MISS_NEXT_ENGINE:
-+        {
-+            ioc_fm_pcd_cc_node_modify_next_engine_params_t *param;
-+
-+            param = (ioc_fm_pcd_cc_node_modify_next_engine_params_t *) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_cc_node_modify_next_engine_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_cc_node_modify_next_engine_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t));
-+                if (copy_from_user(compat_param, (ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t *) compat_ptr(arg),
-+                                    sizeof(ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_cc_node_modify_next_engine(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_cc_node_modify_next_engine_params_t *) arg,
-+                                    sizeof(ioc_fm_pcd_cc_node_modify_next_engine_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            err = FM_PCD_MatchTableModifyMissNextEngine(param->id,
-+                    (t_FmPcdCcNextEngineParams*)(&param->cc_next_engine_params));
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_MATCH_TABLE_REMOVE_KEY_COMPAT:
-+#endif
-+        case FM_PCD_IOC_MATCH_TABLE_REMOVE_KEY:
-+        {
-+            ioc_fm_pcd_cc_node_remove_key_params_t *param;
-+
-+            param = (ioc_fm_pcd_cc_node_remove_key_params_t *) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_cc_node_remove_key_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_cc_node_remove_key_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_node_remove_key_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_node_remove_key_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_cc_node_remove_key_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_node_remove_key_params_t));
-+                if (copy_from_user(compat_param,
-+                            (ioc_compat_fm_pcd_cc_node_remove_key_params_t *)compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_cc_node_remove_key_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                param->id = compat_ptr(compat_param->id);
-+                param->key_indx = compat_param->key_indx;
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_cc_node_remove_key_params_t *) arg,
-+                            sizeof(ioc_fm_pcd_cc_node_remove_key_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            err = FM_PCD_MatchTableRemoveKey(param->id, param->key_indx);
-+
-+            XX_Free(param);
-+            break;
-+        }
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_MATCH_TABLE_ADD_KEY_COMPAT:
-+#endif
-+        case FM_PCD_IOC_MATCH_TABLE_ADD_KEY:
-+        {
-+            ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t *param;
-+
-+            param = (ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t *) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t));
-+                if (copy_from_user(compat_param,
-+                            (ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t *)compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_cc_node_modify_key_and_next_engine(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t *)arg,
-+                                    sizeof(ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            if (param->key_size)
-+            {
-+                int size = 0;
-+
-+                if (param->key_params.p_key)  size += param->key_size;
-+                if (param->key_params.p_mask) size += param->key_size;
-+
-+                if (size)
-+                {
-+                    uint8_t *p_tmp;
-+
-+                    p_tmp = (uint8_t*) XX_Malloc(size);
-+                    if (!p_tmp)
-+                    {
-+                        XX_Free(param);
-+                        RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD key/mask"));
-+                    }
-+
-+                    if (param->key_params.p_key)
-+                    {
-+                        if (copy_from_user(p_tmp, param->key_params.p_key, param->key_size))
-+                        {
-+                            XX_Free(p_tmp);
-+                            XX_Free(param);
-+                            RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                        }
-+
-+                        param->key_params.p_key = p_tmp;
-+                    }
-+
-+                    if (param->key_params.p_mask)
-+                    {
-+                        p_tmp += param->key_size;
-+                        if (copy_from_user(p_tmp, param->key_params.p_mask, param->key_size))
-+                        {
-+                            XX_Free(p_tmp - param->key_size);
-+                            XX_Free(param);
-+                            RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                        }
-+
-+                        param->key_params.p_mask = p_tmp;
-+                    }
-+                }
-+            }
-+
-+            err = FM_PCD_MatchTableAddKey(
-+                    param->id,
-+                    param->key_indx,
-+                    param->key_size,
-+                    (t_FmPcdCcKeyParams*)&param->key_params);
-+
-+            if (param->key_params.p_key)
-+                XX_Free(param->key_params.p_key);
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_AND_NEXT_ENGINE_COMPAT:
-+#endif
-+        case FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_AND_NEXT_ENGINE:
-+        {
-+            ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t *param;
-+
-+            param = (ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t *) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t));
-+                if (copy_from_user(compat_param,
-+                            (ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t *)compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_cc_node_modify_key_and_next_engine(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t *)arg,
-+                            sizeof(ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            err = FM_PCD_MatchTableModifyKeyAndNextEngine(param->id,
-+                    param->key_indx,
-+                    param->key_size,
-+                    (t_FmPcdCcKeyParams*)(&param->key_params));
-+
-+            XX_Free(param);
-+            break;
-+        }
-+        
-+        
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_MATCH_TABLE_GET_KEY_STAT_COMPAT:
-+#endif
-+        case FM_PCD_IOC_MATCH_TABLE_GET_KEY_STAT:
-+        {
-+            ioc_fm_pcd_cc_tbl_get_stats_t param;
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_tbl_get_stats_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_tbl_get_stats_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t));
-+                if (!compat_param)
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t));
-+                if (copy_from_user(compat_param,
-+                            (ioc_compat_fm_pcd_cc_tbl_get_stats_t *)compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_cc_tbl_get_stats(compat_param, &param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(&param, (ioc_fm_pcd_cc_tbl_get_stats_t *)arg,
-+                            sizeof(ioc_fm_pcd_cc_tbl_get_stats_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+  
-+            err = FM_PCD_MatchTableGetKeyStatistics((t_Handle) param.id,
-+                                                     param.key_index,
-+                                                     (t_FmPcdCcKeyStatistics *) &param.statistics);
-+         
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_tbl_get_stats_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_tbl_get_stats_t*) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t));
-+                if (!compat_param)
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t));
-+                compat_copy_fm_pcd_cc_tbl_get_stats(compat_param, &param, COMPAT_K_TO_US);
-+                if (copy_to_user((ioc_compat_fm_pcd_cc_tbl_get_stats_t*) compat_ptr(arg),
-+                            compat_param,
-+                            sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t))){
-+                    XX_Free(compat_param);
-+                    RETURN_ERROR(MINOR, E_READ_FAILED, NO_MSG);
-+                }
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_to_user((ioc_fm_pcd_cc_tbl_get_stats_t *)arg,
-+                                  &param,
-+                                  sizeof(ioc_fm_pcd_cc_tbl_get_stats_t)))
-+                    RETURN_ERROR(MINOR, E_READ_FAILED, NO_MSG);
-+            }
-+
-+            break;
-+        }
-+
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_MATCH_TABLE_GET_MISS_STAT_COMPAT:
-+#endif
-+        case FM_PCD_IOC_MATCH_TABLE_GET_MISS_STAT:
-+        {
-+            ioc_fm_pcd_cc_tbl_get_stats_t param;
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_tbl_get_stats_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_tbl_get_stats_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t));
-+                if (!compat_param)
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t));
-+                if (copy_from_user(compat_param,
-+                            (ioc_compat_fm_pcd_cc_tbl_get_stats_t *)compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_cc_tbl_get_stats(compat_param, &param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(&param, (ioc_fm_pcd_cc_tbl_get_stats_t *)arg,
-+                            sizeof(ioc_fm_pcd_cc_tbl_get_stats_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+  
-+            err = FM_PCD_MatchTableGetMissStatistics((t_Handle) param.id,
-+                                                     (t_FmPcdCcKeyStatistics *) &param.statistics);
-+         
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_tbl_get_stats_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_tbl_get_stats_t*) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t));
-+                if (!compat_param)
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t));
-+                compat_copy_fm_pcd_cc_tbl_get_stats(compat_param, &param, COMPAT_K_TO_US);
-+                if (copy_to_user((ioc_compat_fm_pcd_cc_tbl_get_stats_t*) compat_ptr(arg),
-+                            compat_param,
-+                            sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t))){
-+                    XX_Free(compat_param);
-+                    RETURN_ERROR(MINOR, E_READ_FAILED, NO_MSG);
-+                }
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_to_user((ioc_fm_pcd_cc_tbl_get_stats_t *)arg,
-+                                  &param,
-+                                  sizeof(ioc_fm_pcd_cc_tbl_get_stats_t)))
-+                    RETURN_ERROR(MINOR, E_READ_FAILED, NO_MSG);
-+            }
-+
-+            break;
-+        }
-+        
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_HASH_TABLE_GET_MISS_STAT_COMPAT:
-+#endif
-+        case FM_PCD_IOC_HASH_TABLE_GET_MISS_STAT:
-+        {
-+            ioc_fm_pcd_cc_tbl_get_stats_t param;
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_tbl_get_stats_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_tbl_get_stats_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t));
-+                if (!compat_param)
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t));
-+                if (copy_from_user(compat_param,
-+                            (ioc_compat_fm_pcd_cc_tbl_get_stats_t *)compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_cc_tbl_get_stats(compat_param, &param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(&param, (ioc_fm_pcd_cc_tbl_get_stats_t *)arg,
-+                            sizeof(ioc_fm_pcd_cc_tbl_get_stats_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+  
-+            err = FM_PCD_HashTableGetMissStatistics((t_Handle) param.id,
-+                                                     (t_FmPcdCcKeyStatistics *) &param.statistics);
-+         
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_tbl_get_stats_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_tbl_get_stats_t*) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t));
-+                if (!compat_param)
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t));
-+                compat_copy_fm_pcd_cc_tbl_get_stats(compat_param, &param, COMPAT_K_TO_US);
-+                if (copy_to_user((ioc_compat_fm_pcd_cc_tbl_get_stats_t*) compat_ptr(arg),
-+                            compat_param,
-+                            sizeof(ioc_compat_fm_pcd_cc_tbl_get_stats_t))){
-+                    XX_Free(compat_param);
-+                    RETURN_ERROR(MINOR, E_READ_FAILED, NO_MSG);
-+                }
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_to_user((ioc_fm_pcd_cc_tbl_get_stats_t *)arg,
-+                                  &param,
-+                                  sizeof(ioc_fm_pcd_cc_tbl_get_stats_t)))
-+                    RETURN_ERROR(MINOR, E_READ_FAILED, NO_MSG);
-+            }
-+
-+            break;
-+        }
-+      
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_HASH_TABLE_SET_COMPAT:
-+#endif
-+        case FM_PCD_IOC_HASH_TABLE_SET:
-+        {
-+            ioc_fm_pcd_hash_table_params_t *param;
-+
-+            param = (ioc_fm_pcd_hash_table_params_t*) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_hash_table_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_hash_table_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_hash_table_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_hash_table_params_t*) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_hash_table_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_hash_table_params_t));
-+                if (copy_from_user(compat_param,
-+                            (ioc_compat_fm_pcd_hash_table_params_t*)compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_hash_table_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_hash_table(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_hash_table_params_t *)arg,
-+                                    sizeof(ioc_fm_pcd_hash_table_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            param->id = FM_PCD_HashTableSet(p_LnxWrpFmDev->h_PcdDev, (t_FmPcdHashTableParams *) param);
-+
-+            if (!param->id)
-+            {
-+                XX_Free(param);
-+                err = E_INVALID_VALUE;
-+                /* Since the LLD has no errno-style error reporting,
-+                   we're left here with no other option than to report
-+                   a generic E_INVALID_VALUE */
-+                break;
-+            }
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_hash_table_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_hash_table_params_t*) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_hash_table_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_hash_table_params_t));
-+                compat_copy_fm_pcd_hash_table(compat_param, param, COMPAT_K_TO_US);
-+                if (copy_to_user((ioc_compat_fm_pcd_hash_table_params_t*) compat_ptr(arg),
-+                            compat_param,
-+                            sizeof(ioc_compat_fm_pcd_hash_table_params_t)))
-+                    err = E_READ_FAILED;
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_to_user((ioc_fm_pcd_hash_table_params_t *)arg,
-+                            param,
-+                            sizeof(ioc_fm_pcd_hash_table_params_t)))
-+                    err = E_READ_FAILED;
-+            }
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_HASH_TABLE_DELETE_COMPAT:
-+#endif
-+        case FM_PCD_IOC_HASH_TABLE_DELETE:
-+        {
-+            ioc_fm_obj_t id;
-+
-+            memset(&id, 0, sizeof(ioc_fm_obj_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_obj_t compat_id;
-+
-+                if (copy_from_user(&compat_id, (ioc_compat_fm_obj_t *) compat_ptr(arg), sizeof(ioc_compat_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+                id.obj = compat_pcd_id2ptr(compat_id.obj);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(&id, (ioc_fm_obj_t *) arg, sizeof(ioc_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            err = FM_PCD_HashTableDelete(id.obj);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_HASH_TABLE_ADD_KEY_COMPAT:
-+#endif
-+        case FM_PCD_IOC_HASH_TABLE_ADD_KEY:
-+        {
-+            ioc_fm_pcd_hash_table_add_key_params_t *param = NULL;
-+
-+            param = (ioc_fm_pcd_hash_table_add_key_params_t*) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_hash_table_add_key_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_hash_table_add_key_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_hash_table_add_key_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_hash_table_add_key_params_t*) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_hash_table_add_key_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_hash_table_add_key_params_t));
-+                if (copy_from_user(compat_param,
-+                            (ioc_compat_fm_pcd_hash_table_add_key_params_t*) compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_hash_table_add_key_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                if (compat_param->key_size)
-+                {
-+                    param->p_hash_tbl = compat_pcd_id2ptr(compat_param->p_hash_tbl);
-+                    param->key_size   = compat_param->key_size;
-+
-+                    compat_copy_fm_pcd_cc_key(&compat_param->key_params, &param->key_params, COMPAT_US_TO_K);
-+                }
-+                else
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    err = E_INVALID_VALUE;
-+                    break;
-+                }
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_hash_table_add_key_params_t*) arg,
-+                            sizeof(ioc_fm_pcd_hash_table_add_key_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            if (param->key_size)
-+            {
-+                int size = 0;
-+
-+                if (param->key_params.p_key)  size += param->key_size;
-+                if (param->key_params.p_mask) size += param->key_size;
-+
-+                if (size)
-+                {
-+                    uint8_t *p_tmp;
-+
-+                    p_tmp = (uint8_t*) XX_Malloc(size);
-+                    if (!p_tmp)
-+                    {
-+                        XX_Free(param);
-+                        RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD key/mask"));
-+                    }
-+
-+                    if (param->key_params.p_key)
-+                    {
-+                        if (copy_from_user(p_tmp, param->key_params.p_key, param->key_size))
-+                        {
-+                            XX_Free(p_tmp);
-+                            XX_Free(param);
-+                            RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                        }
-+
-+                        param->key_params.p_key = p_tmp;
-+                    }
-+
-+                    if (param->key_params.p_mask)
-+                    {
-+                        p_tmp += param->key_size;
-+                        if (copy_from_user(p_tmp, param->key_params.p_mask, param->key_size))
-+                        {
-+                            XX_Free(p_tmp - param->key_size);
-+                            XX_Free(param);
-+                            RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                        }
-+
-+                        param->key_params.p_mask = p_tmp;
-+                    }
-+                }
-+            }
-+
-+            err = FM_PCD_HashTableAddKey(
-+                    param->p_hash_tbl,
-+                    param->key_size,
-+                    (t_FmPcdCcKeyParams*)&param->key_params);
-+
-+            if (param->key_params.p_key)
-+                XX_Free(param->key_params.p_key);
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_HASH_TABLE_REMOVE_KEY_COMPAT:
-+#endif
-+        case FM_PCD_IOC_HASH_TABLE_REMOVE_KEY:
-+        {
-+            ioc_fm_pcd_hash_table_remove_key_params_t *param = NULL;
-+
-+            param = (ioc_fm_pcd_hash_table_remove_key_params_t*) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_hash_table_remove_key_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_hash_table_remove_key_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_hash_table_remove_key_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_hash_table_remove_key_params_t*) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_hash_table_remove_key_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_hash_table_remove_key_params_t));
-+                if (copy_from_user(compat_param,
-+                            (ioc_compat_fm_pcd_hash_table_remove_key_params_t*) compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_hash_table_remove_key_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                param->p_hash_tbl = compat_pcd_id2ptr(compat_param->p_hash_tbl);
-+                param->key_size   = compat_param->key_size;
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_hash_table_remove_key_params_t*)arg,
-+                            sizeof(ioc_fm_pcd_hash_table_remove_key_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            if (param->key_size)
-+            {
-+                uint8_t *p_key;
-+
-+                p_key = (uint8_t*) XX_Malloc(param->key_size);
-+                if (!p_key)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                if (param->p_key && copy_from_user(p_key, param->p_key, param->key_size))
-+                {
-+                    XX_Free(p_key);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+                param->p_key = p_key;
-+            }
-+
-+            err = FM_PCD_HashTableRemoveKey(
-+                    param->p_hash_tbl,
-+                    param->key_size,
-+                    param->p_key);
-+
-+            if (param->p_key)
-+                XX_Free(param->p_key);
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_COMPAT:
-+#endif
-+        case FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY:
-+        {
-+            ioc_fm_pcd_cc_node_modify_key_params_t  *param;
-+
-+            param = (ioc_fm_pcd_cc_node_modify_key_params_t *) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_cc_node_modify_key_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_cc_node_modify_key_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_cc_node_modify_key_params_t  *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_cc_node_modify_key_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_cc_node_modify_key_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_cc_node_modify_key_params_t));
-+                if (copy_from_user(compat_param, (ioc_compat_fm_pcd_cc_node_modify_key_params_t *)compat_ptr(arg),
-+                                    sizeof(ioc_compat_fm_pcd_cc_node_modify_key_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_cc_node_modify_key(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_cc_node_modify_key_params_t *)arg,
-+                                    sizeof(ioc_fm_pcd_cc_node_modify_key_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            if (param->key_size)
-+            {
-+                int size = 0;
-+
-+                if (param->p_key)  size += param->key_size;
-+                if (param->p_mask) size += param->key_size;
-+
-+                if (size)
-+                {
-+                    uint8_t *p_tmp;
-+
-+                    p_tmp = (uint8_t*) XX_Malloc(size);
-+                    if (!p_tmp)
-+                    {
-+                        XX_Free(param);
-+                        RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD key/mask"));
-+                    }
-+
-+                    if (param->p_key)
-+                    {
-+                        if (copy_from_user(p_tmp, param->p_key, param->key_size))
-+                        {
-+                            XX_Free(p_tmp);
-+                            XX_Free(param);
-+                            RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                        }
-+
-+                        param->p_key = p_tmp;
-+                    }
-+
-+                    if (param->p_mask)
-+                    {
-+                        p_tmp += param->key_size;
-+                        if (copy_from_user(p_tmp, param->p_mask, param->key_size))
-+                        {
-+                            XX_Free(p_tmp - param->key_size);
-+                            XX_Free(param);
-+                            RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                        }
-+
-+                        param->p_mask = p_tmp;
-+                    }
-+                }
-+            }
-+
-+            err = FM_PCD_MatchTableModifyKey(param->id,
-+                    param->key_indx,
-+                    param->key_size,
-+                    param->p_key,
-+                    param->p_mask);
-+
-+            if (param->p_key)
-+                XX_Free(param->p_key);
-+            else if (param->p_mask)
-+                XX_Free(param->p_mask);
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_MANIP_NODE_SET_COMPAT:
-+#endif
-+        case FM_PCD_IOC_MANIP_NODE_SET:
-+        {
-+            ioc_fm_pcd_manip_params_t *param;
-+            uint8_t *p_data = NULL;
-+            uint8_t size;
-+
-+            param = (ioc_fm_pcd_manip_params_t *) XX_Malloc(
-+                        sizeof(ioc_fm_pcd_manip_params_t));
-+
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_manip_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_manip_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_manip_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_manip_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_manip_params_t));
-+                if (copy_from_user(compat_param,
-+                            (ioc_compat_fm_pcd_manip_params_t *) compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_manip_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_fm_pcd_manip_set_node(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_manip_params_t *)arg,
-+                                            sizeof(ioc_fm_pcd_manip_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            if (param->type == e_IOC_FM_PCD_MANIP_HDR)
-+            {
-+                size = param->u.hdr.insrt_params.u.generic.size;
-+                p_data = (uint8_t *) XX_Malloc(size);
-+                if (!p_data )
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, NO_MSG);
-+                }
-+
-+                if (param->u.hdr.insrt_params.u.generic.p_data &&
-+                        copy_from_user(p_data,
-+                            param->u.hdr.insrt_params.u.generic.p_data, size))
-+                {
-+                    XX_Free(p_data);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                param->u.hdr.insrt_params.u.generic.p_data = p_data;
-+            }
-+
-+            if (param->id)
-+            {
-+                /* Security Hole: the user can pass any piece of garbage
-+                   in 'param->id', and that will go straight through to the LLD,
-+                   no checks being done by the wrapper! */
-+                err = FM_PCD_ManipNodeReplace(
-+                        (t_Handle) param->id,
-+                        (t_FmPcdManipParams*) param);
-+                if (err)
-+                {
-+                    if (p_data)
-+                        XX_Free(p_data);
-+                    XX_Free(param);
-+                    break;
-+                }
-+            }
-+            else
-+            {
-+                param->id = FM_PCD_ManipNodeSet(
-+                        p_LnxWrpFmDev->h_PcdDev,
-+                        (t_FmPcdManipParams*) param);
-+                if (!param->id)
-+                {
-+                    if (p_data)
-+                        XX_Free(p_data);
-+                    XX_Free(param);
-+                    err = E_INVALID_VALUE;
-+                    /* Since the LLD has no errno-style error reporting,
-+                       we're left here with no other option than to report
-+                       a generic E_INVALID_VALUE */
-+                    break;
-+                }
-+            }
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_manip_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_manip_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_manip_params_t));
-+                if (!compat_param)
-+                {
-+                    if (p_data)
-+                        XX_Free(p_data);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_manip_params_t));
-+
-+                compat_fm_pcd_manip_set_node(compat_param, param, COMPAT_K_TO_US);
-+
-+                if (copy_to_user((ioc_compat_fm_pcd_manip_params_t *) compat_ptr(arg),
-+                            compat_param,
-+                            sizeof(ioc_compat_fm_pcd_manip_params_t)))
-+                    err = E_READ_FAILED;
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_to_user((ioc_fm_pcd_manip_params_t *)arg,
-+                            param, sizeof(ioc_fm_pcd_manip_params_t)))
-+                    err = E_READ_FAILED;
-+            }
-+
-+            if (p_data)
-+                XX_Free(p_data);
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_MANIP_NODE_DELETE_COMPAT:
-+#endif
-+        case FM_PCD_IOC_MANIP_NODE_DELETE:
-+        {
-+            ioc_fm_obj_t id;
-+
-+            memset(&id, 0, sizeof(ioc_fm_obj_t));
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_obj_t compat_id;
-+
-+                if (copy_from_user(&compat_id, (ioc_compat_fm_obj_t *) compat_ptr(arg), sizeof(ioc_compat_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+                compat_obj_delete(&compat_id, &id);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(&id, (ioc_fm_obj_t *) arg, sizeof(ioc_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            err = FM_PCD_ManipNodeDelete(id.obj);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+	case FM_PCD_IOC_MANIP_GET_STATS_COMPAT:
-+#endif
-+        case FM_PCD_IOC_MANIP_GET_STATS:
-+	{
-+            ioc_fm_pcd_manip_get_stats_t param;
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_manip_get_stats_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_manip_get_stats_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_manip_get_stats_t));
-+                if (!compat_param)
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_manip_get_stats_t));
-+                if (copy_from_user(compat_param,
-+                            (ioc_compat_fm_pcd_manip_get_stats_t *)compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_manip_get_stats_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_manip_get_stats(compat_param, &param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(&param, (ioc_fm_pcd_manip_get_stats_t *)arg,
-+                            sizeof(ioc_fm_pcd_manip_get_stats_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            err = FM_PCD_ManipGetStatistics((t_Handle) param.id,
-+						(t_FmPcdManipStats*) &param.stats);
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_manip_get_stats_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_manip_get_stats_t*) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_manip_get_stats_t));
-+                if (!compat_param)
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_manip_get_stats_t));
-+                compat_copy_fm_pcd_manip_get_stats(compat_param, &param, COMPAT_K_TO_US);
-+                if (copy_to_user((ioc_compat_fm_pcd_manip_get_stats_t*) compat_ptr(arg),
-+                            compat_param,
-+                            sizeof(ioc_compat_fm_pcd_manip_get_stats_t))){
-+                    XX_Free(compat_param);
-+                    RETURN_ERROR(MINOR, E_READ_FAILED, NO_MSG);
-+                }
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            if (copy_to_user((ioc_fm_pcd_manip_get_stats_t *)arg,
-+                                  &param,
-+                                  sizeof(ioc_fm_pcd_manip_get_stats_t)))
-+                    RETURN_ERROR(MINOR, E_READ_FAILED, NO_MSG);
-+
-+            break;
-+	}
-+
-+#if (DPAA_VERSION >= 11)
-+#if defined(CONFIG_COMPAT)
-+	case FM_PCD_IOC_FRM_REPLIC_GROUP_SET_COMPAT:
-+#endif
-+	case FM_PCD_IOC_FRM_REPLIC_GROUP_SET:
-+	{
-+		ioc_fm_pcd_frm_replic_group_params_t *param;
-+
-+		param = (ioc_fm_pcd_frm_replic_group_params_t *) XX_Malloc(
-+				sizeof(ioc_fm_pcd_frm_replic_group_params_t));
-+		if (!param)
-+			RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+		memset(param, 0, sizeof(ioc_fm_pcd_frm_replic_group_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+		if (compat)
-+		{
-+			ioc_compat_fm_pcd_frm_replic_group_params_t
-+				*compat_param;
-+
-+			compat_param =
-+				(ioc_compat_fm_pcd_frm_replic_group_params_t *)
-+					XX_Malloc(sizeof(ioc_compat_fm_pcd_frm_replic_group_params_t));
-+			if (!compat_param)
-+			{
-+				XX_Free(param);
-+				RETURN_ERROR(MINOR, E_NO_MEMORY,
-+						("IOCTL FM PCD"));
-+			}
-+
-+			memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_frm_replic_group_params_t));
-+			if (copy_from_user(compat_param,
-+				(ioc_compat_fm_pcd_frm_replic_group_params_t *)
-+					compat_ptr(arg),
-+					sizeof(ioc_compat_fm_pcd_frm_replic_group_params_t))) {
-+				XX_Free(compat_param);
-+				XX_Free(param);
-+				RETURN_ERROR(MINOR, E_READ_FAILED, NO_MSG);
-+			}
-+
-+			compat_copy_fm_pcd_frm_replic_group_params(compat_param,
-+					param, COMPAT_US_TO_K);
-+
-+			XX_Free(compat_param);
-+		}
-+		else
-+#endif
-+		{
-+			if (copy_from_user(param,
-+				(ioc_fm_pcd_frm_replic_group_params_t *)arg,
-+				sizeof(ioc_fm_pcd_frm_replic_group_params_t)))
-+			{
-+				XX_Free(param);
-+				RETURN_ERROR(MINOR, E_READ_FAILED, NO_MSG);
-+			}
-+		}
-+
-+		param->id = FM_PCD_FrmReplicSetGroup(p_LnxWrpFmDev->h_PcdDev,
-+				(t_FmPcdFrmReplicGroupParams*)param);
-+
-+		if (!param->id) {
-+			XX_Free(param);
-+			err = E_INVALID_VALUE;
-+			/*
-+			 * Since the LLD has no errno-style error reporting,
-+			 * we're left here with no other option than to report
-+			 * a generic E_INVALID_VALUE
-+			 */
-+			break;
-+		}
-+
-+#if defined(CONFIG_COMPAT)
-+		if (compat)
-+		{
-+			ioc_compat_fm_pcd_frm_replic_group_params_t
-+				*compat_param;
-+
-+			compat_param =
-+				(ioc_compat_fm_pcd_frm_replic_group_params_t *)
-+					XX_Malloc(sizeof(ioc_compat_fm_pcd_frm_replic_group_params_t));
-+			if (!compat_param)
-+			{
-+				XX_Free(param);
-+				RETURN_ERROR(MINOR, E_NO_MEMORY,
-+						("IOCTL FM PCD"));
-+			}
-+
-+			memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_frm_replic_group_params_t));
-+			compat_copy_fm_pcd_frm_replic_group_params(compat_param,
-+					param, COMPAT_K_TO_US);
-+			if (copy_to_user(
-+				(ioc_compat_fm_pcd_frm_replic_group_params_t *)
-+					compat_ptr(arg),
-+					compat_param,
-+					sizeof(ioc_compat_fm_pcd_frm_replic_group_params_t)))
-+				err = E_WRITE_FAILED;
-+
-+			XX_Free(compat_param);
-+		}
-+		else
-+#endif
-+		{
-+			if (copy_to_user(
-+				(ioc_fm_pcd_frm_replic_group_params_t *)arg,
-+				param,
-+				sizeof(ioc_fm_pcd_frm_replic_group_params_t)))
-+				err = E_WRITE_FAILED;
-+		}
-+
-+		XX_Free(param);
-+		break;
-+	}
-+	break;
-+
-+#if defined(CONFIG_COMPAT)
-+	case FM_PCD_IOC_FRM_REPLIC_GROUP_DELETE_COMPAT:
-+#endif
-+	case FM_PCD_IOC_FRM_REPLIC_GROUP_DELETE:
-+	{
-+		ioc_fm_obj_t id;
-+
-+		memset(&id, 0, sizeof(ioc_fm_obj_t));
-+#if defined(CONFIG_COMPAT)
-+		if (compat)
-+		{
-+			ioc_compat_fm_obj_t compat_id;
-+
-+			if (copy_from_user(&compat_id,
-+					(ioc_compat_fm_obj_t *) compat_ptr(arg),
-+					sizeof(ioc_compat_fm_obj_t)))
-+				break;
-+			compat_obj_delete(&compat_id, &id);
-+		}
-+		else
-+#endif
-+		{
-+			if (copy_from_user(&id, (ioc_fm_obj_t *) arg,
-+					sizeof(ioc_fm_obj_t)))
-+				break;
-+		}
-+
-+		return FM_PCD_FrmReplicDeleteGroup(id.obj);
-+	}
-+	break;
-+
-+#if defined(CONFIG_COMPAT)
-+	case FM_PCD_IOC_FRM_REPLIC_MEMBER_ADD_COMPAT:
-+#endif
-+	case FM_PCD_IOC_FRM_REPLIC_MEMBER_ADD:
-+	{
-+		ioc_fm_pcd_frm_replic_member_params_t param;
-+
-+#if defined(CONFIG_COMPAT)
-+		if (compat)
-+		{
-+			ioc_compat_fm_pcd_frm_replic_member_params_t compat_param;
-+
-+			if (copy_from_user(&compat_param, compat_ptr(arg), sizeof(compat_param)))
-+				RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+			compat_copy_fm_pcd_frm_replic_member_params(&compat_param, &param, COMPAT_US_TO_K);
-+		}
-+		else
-+#endif
-+			if (copy_from_user(&param, (void *)arg, sizeof(param)))
-+				RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+		return FM_PCD_FrmReplicAddMember(param.member.h_replic_group,
-+			param.member.member_index,
-+			(t_FmPcdCcNextEngineParams*)&param.next_engine_params);
-+	}
-+	break;
-+
-+#if defined(CONFIG_COMPAT)
-+	case FM_PCD_IOC_FRM_REPLIC_MEMBER_REMOVE_COMPAT:
-+#endif
-+	case FM_PCD_IOC_FRM_REPLIC_MEMBER_REMOVE:
-+	{
-+		ioc_fm_pcd_frm_replic_member_t param;
-+
-+#if defined(CONFIG_COMPAT)
-+		if (compat)
-+		{
-+			ioc_compat_fm_pcd_frm_replic_member_t compat_param;
-+
-+			if (copy_from_user(&compat_param, compat_ptr(arg), sizeof(compat_param)))
-+				RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+			compat_copy_fm_pcd_frm_replic_member(&compat_param, &param, COMPAT_US_TO_K);
-+		}
-+		else
-+#endif
-+			if (copy_from_user(&param, (void *)arg, sizeof(param)))
-+				RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+		return FM_PCD_FrmReplicRemoveMember(param.h_replic_group, param.member_index);
-+	}
-+	break;
-+
-+#if defined(CONFIG_COMPAT)
-+    case FM_IOC_VSP_CONFIG_COMPAT:
-+#endif
-+    case FM_IOC_VSP_CONFIG:
-+    {
-+        ioc_fm_vsp_params_t param;
-+
-+#if defined(CONFIG_COMPAT)
-+        if (compat)
-+        {
-+            ioc_compat_fm_vsp_params_t compat_param;
-+
-+            if (copy_from_user(&compat_param, compat_ptr(arg), sizeof(compat_param)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+            compat_copy_fm_vsp_params(&compat_param, &param, COMPAT_US_TO_K);
-+        }
-+        else
-+#endif
-+            if (copy_from_user(&param, (void *)arg, sizeof(param)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+        {
-+            uint8_t portId = param.port_params.port_id;
-+            param.liodn_offset =
-+                p_LnxWrpFmDev->rxPorts[portId].settings.param.specificParams.rxParams.liodnOffset;
-+        }
-+        param.p_fm = p_LnxWrpFmDev->h_Dev;
-+        param.id = FM_VSP_Config((t_FmVspParams *)&param);
-+
-+#if defined(CONFIG_COMPAT)
-+        if (compat)
-+        {
-+            ioc_compat_fm_vsp_params_t compat_param;
-+
-+            memset(&compat_param, 0, sizeof(compat_param));
-+            compat_copy_fm_vsp_params(&compat_param, &param, COMPAT_K_TO_US);
-+
-+            if (copy_to_user(compat_ptr(arg), &compat_param, sizeof(compat_param)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+        }
-+        else
-+#endif
-+            if (copy_to_user((void *)arg, &param, sizeof(param)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+        break;
-+    }
-+
-+#if defined(CONFIG_COMPAT)
-+    case FM_IOC_VSP_INIT_COMPAT:
-+#endif
-+    case FM_IOC_VSP_INIT:
-+    {
-+        ioc_fm_obj_t id;
-+
-+        memset(&id, 0, sizeof(ioc_fm_obj_t));
-+#if defined(CONFIG_COMPAT)
-+        if (compat)
-+        {
-+            ioc_compat_fm_obj_t compat_id;
-+
-+            if (copy_from_user(&compat_id,
-+                    (ioc_compat_fm_obj_t *) compat_ptr(arg),
-+                    sizeof(ioc_compat_fm_obj_t)))
-+                break;
-+            id.obj = compat_pcd_id2ptr(compat_id.obj);
-+        }
-+        else
-+#endif
-+        {
-+            if (copy_from_user(&id, (ioc_fm_obj_t *) arg,
-+                    sizeof(ioc_fm_obj_t)))
-+                break;
-+        }
-+
-+        return FM_VSP_Init(id.obj);
-+    }
-+
-+#if defined(CONFIG_COMPAT)
-+    case FM_IOC_VSP_FREE_COMPAT:
-+#endif
-+    case FM_IOC_VSP_FREE:
-+    {
-+        ioc_fm_obj_t id;
-+
-+        memset(&id, 0, sizeof(ioc_fm_obj_t));
-+#if defined(CONFIG_COMPAT)
-+        if (compat)
-+        {
-+            ioc_compat_fm_obj_t compat_id;
-+
-+            if (copy_from_user(&compat_id,
-+                    (ioc_compat_fm_obj_t *) compat_ptr(arg),
-+                    sizeof(ioc_compat_fm_obj_t)))
-+                break;
-+            compat_obj_delete(&compat_id, &id);
-+        }
-+        else
-+#endif
-+        {
-+            if (copy_from_user(&id, (ioc_fm_obj_t *) arg,
-+                    sizeof(ioc_fm_obj_t)))
-+                break;
-+        }
-+
-+        return FM_VSP_Free(id.obj);
-+    }
-+
-+#if defined(CONFIG_COMPAT)
-+    case FM_IOC_VSP_CONFIG_POOL_DEPLETION_COMPAT:
-+#endif
-+    case FM_IOC_VSP_CONFIG_POOL_DEPLETION:
-+    {
-+        ioc_fm_buf_pool_depletion_params_t param;
-+
-+#if defined(CONFIG_COMPAT)
-+        if (compat)
-+        {
-+            ioc_compat_fm_buf_pool_depletion_params_t compat_param;
-+
-+            if (copy_from_user(&compat_param, compat_ptr(arg), sizeof(compat_param)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+            compat_copy_fm_buf_pool_depletion_params(&compat_param, &param, COMPAT_US_TO_K);
-+        }
-+        else
-+#endif
-+            if (copy_from_user(&param, (void *)arg, sizeof(param)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+        if (FM_VSP_ConfigPoolDepletion(param.p_fm_vsp,
-+                    (t_FmBufPoolDepletion *)&param.fm_buf_pool_depletion))
-+            RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+        break;
-+    }
-+
-+
-+#if defined(CONFIG_COMPAT)
-+    case FM_IOC_VSP_CONFIG_BUFFER_PREFIX_CONTENT_COMPAT:
-+#endif
-+    case FM_IOC_VSP_CONFIG_BUFFER_PREFIX_CONTENT:
-+    {
-+        ioc_fm_buffer_prefix_content_params_t param;
-+
-+#if defined(CONFIG_COMPAT)
-+        if (compat)
-+        {
-+            ioc_compat_fm_buffer_prefix_content_params_t compat_param;
-+
-+            if (copy_from_user(&compat_param, compat_ptr(arg), sizeof(compat_param)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+            compat_copy_fm_buffer_prefix_content_params(&compat_param, &param, COMPAT_US_TO_K);
-+        }
-+        else
-+#endif
-+            if (copy_from_user(&param, (void *)arg, sizeof(param)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+        if (FM_VSP_ConfigBufferPrefixContent(param.p_fm_vsp,
-+                (t_FmBufferPrefixContent *)&param.fm_buffer_prefix_content))
-+            RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+        break;
-+    }
-+
-+#if defined(CONFIG_COMPAT)
-+    case FM_IOC_VSP_CONFIG_NO_SG_COMPAT:
-+#endif
-+    case FM_IOC_VSP_CONFIG_NO_SG:
-+    {
-+        ioc_fm_vsp_config_no_sg_params_t param;
-+
-+#if defined(CONFIG_COMPAT)
-+        if (compat)
-+        {
-+            ioc_compat_fm_vsp_config_no_sg_params_t compat_param;
-+
-+            if (copy_from_user(&compat_param, compat_ptr(arg), sizeof(compat_param)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+            compat_copy_fm_vsp_config_no_sg_params(&compat_param, &param, COMPAT_US_TO_K);
-+        }
-+        else
-+#endif
-+            if (copy_from_user(&param, (void *)arg, sizeof(param)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+        if (FM_VSP_ConfigNoScatherGather(param.p_fm_vsp, param.no_sg))
-+            RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+        break;
-+    }
-+
-+#if defined(CONFIG_COMPAT)
-+    case FM_IOC_VSP_GET_BUFFER_PRS_RESULT_COMPAT:
-+#endif
-+    case FM_IOC_VSP_GET_BUFFER_PRS_RESULT:
-+    {
-+        ioc_fm_vsp_prs_result_params_t param;
-+
-+#if defined(CONFIG_COMPAT)
-+        if (compat)
-+        {
-+            ioc_compat_fm_vsp_prs_result_params_t compat_param;
-+
-+            if (copy_from_user(&compat_param, compat_ptr(arg), sizeof(compat_param)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+            compat_copy_fm_vsp_prs_result_params(&compat_param, &param, COMPAT_US_TO_K);
-+        }
-+        else
-+#endif
-+            if (copy_from_user(&param, (void *)arg, sizeof(param)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+        /* this call just adds the parse results offset to p_data */
-+        param.p_data = FM_VSP_GetBufferPrsResult(param.p_fm_vsp, param.p_data);
-+
-+        if (!param.p_data)
-+            RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+#if defined(CONFIG_COMPAT)
-+        if (compat)
-+        {
-+            ioc_compat_fm_vsp_prs_result_params_t compat_param;
-+
-+            memset(&compat_param, 0, sizeof(compat_param));
-+            compat_copy_fm_vsp_prs_result_params(&compat_param, &param, COMPAT_K_TO_US);
-+
-+            if (copy_to_user(compat_ptr(arg), &compat_param, sizeof(compat_param)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+        }
-+        else
-+#endif
-+            if (copy_to_user((void *)arg, &param, sizeof(param)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+        break;
-+    }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+#ifdef FM_CAPWAP_SUPPORT
-+#warning "feature not supported!"
-+#if defined(CONFIG_COMPAT)
-+        case FM_PCD_IOC_STATISTICS_SET_NODE_COMPAT:
-+#endif
-+        case FM_PCD_IOC_STATISTICS_SET_NODE:
-+        {
-+/*          ioc_fm_pcd_stats_params_t param;
-+            ...
-+            param->id = FM_PCD_StatisticsSetNode(p_LnxWrpFmDev->h_PcdDev,
-+                                (t_FmPcdStatsParams *)&param);
-+*/
-+            err = E_NOT_SUPPORTED;
-+            break;
-+        }
-+#endif /* FM_CAPWAP_SUPPORT */
-+
-+        default:
-+            RETURN_ERROR(MINOR, E_INVALID_SELECTION,
-+                ("invalid ioctl: cmd:0x%08x(type:0x%02x, nr: %d.\n",
-+                cmd, _IOC_TYPE(cmd), _IOC_NR(cmd)));
-+    }
-+
-+    if (err)
-+        RETURN_ERROR(MINOR, err, ("IOCTL FM PCD"));
-+
-+    return E_OK;
-+}
-+
-+void FM_Get_Api_Version(ioc_fm_api_version_t *p_version)
-+{
-+	p_version->version.major = FMD_API_VERSION_MAJOR;
-+	p_version->version.minor = FMD_API_VERSION_MINOR;
-+	p_version->version.respin = FMD_API_VERSION_RESPIN;
-+	p_version->version.reserved = 0;
-+}
-+
-+t_Error LnxwrpFmIOCTL(t_LnxWrpFmDev *p_LnxWrpFmDev, unsigned int cmd, unsigned long arg, bool compat)
-+{
-+    t_Error err = E_OK;
-+
-+    switch (cmd)
-+    {
-+        case FM_IOC_SET_PORTS_BANDWIDTH:
-+        {
-+            ioc_fm_port_bandwidth_params *param;
-+
-+            param = (ioc_fm_port_bandwidth_params*) XX_Malloc(sizeof(ioc_fm_port_bandwidth_params));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_port_bandwidth_params));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (copy_from_user(param, (ioc_fm_port_bandwidth_params*)compat_ptr(arg), sizeof(ioc_fm_port_bandwidth_params)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_port_bandwidth_params*)arg, sizeof(ioc_fm_port_bandwidth_params)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            err =  FM_SetPortsBandwidth(p_LnxWrpFmDev->h_Dev, (t_FmPortsBandwidthParams*) param);
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+        case FM_IOC_GET_REVISION:
-+        {
-+            ioc_fm_revision_info_t *param;
-+
-+            param = (ioc_fm_revision_info_t *) XX_Malloc(sizeof(ioc_fm_revision_info_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            FM_GetRevision(p_LnxWrpFmDev->h_Dev, (t_FmRevisionInfo*)param);
-+            /* This one never returns anything other than E_OK */
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (copy_to_user((ioc_fm_revision_info_t *)compat_ptr(arg),
-+                            param,
-+                            sizeof(ioc_fm_revision_info_t))){
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_READ_FAILED, NO_MSG);
-+                 }
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_to_user((ioc_fm_revision_info_t *)arg,
-+                            param,
-+                            sizeof(ioc_fm_revision_info_t))){
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_READ_FAILED, NO_MSG);
-+                }
-+            }
-+            XX_Free(param);
-+            break;
-+        }
-+
-+        case FM_IOC_SET_COUNTER:
-+        {
-+            ioc_fm_counters_params_t *param;
-+
-+            param = (ioc_fm_counters_params_t *) XX_Malloc(sizeof(ioc_fm_counters_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_counters_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (copy_from_user(param, (ioc_fm_counters_params_t *)compat_ptr(arg), sizeof(ioc_fm_counters_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_counters_params_t *)arg, sizeof(ioc_fm_counters_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            err = FM_ModifyCounter(p_LnxWrpFmDev->h_Dev, param->cnt, param->val);
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+        case FM_IOC_GET_COUNTER:
-+        {
-+            ioc_fm_counters_params_t *param;
-+
-+            param = (ioc_fm_counters_params_t *) XX_Malloc(sizeof(ioc_fm_counters_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PCD"));
-+
-+            memset(param, 0, sizeof(ioc_fm_counters_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (copy_from_user(param, (ioc_fm_counters_params_t *)compat_ptr(arg), sizeof(ioc_fm_counters_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_counters_params_t *)arg, sizeof(ioc_fm_counters_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            param->val = FM_GetCounter(p_LnxWrpFmDev->h_Dev, param->cnt);
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (copy_to_user((ioc_fm_counters_params_t *)compat_ptr(arg), param, sizeof(ioc_fm_counters_params_t)))
-+                    err = E_READ_FAILED;
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_to_user((ioc_fm_counters_params_t *)arg, param, sizeof(ioc_fm_counters_params_t)))
-+                    err = E_READ_FAILED;
-+            }
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+        case FM_IOC_FORCE_INTR:
-+        {
-+            ioc_fm_exceptions param;
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (get_user(param, (ioc_fm_exceptions*) compat_ptr(arg)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+            else
-+#endif
-+            {
-+                if (get_user(param, (ioc_fm_exceptions*)arg))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            err = FM_ForceIntr(p_LnxWrpFmDev->h_Dev, (e_FmExceptions)param);
-+            break;
-+        }
-+
-+	case FM_IOC_GET_API_VERSION:
-+	{
-+		ioc_fm_api_version_t version;
-+
-+		FM_Get_Api_Version(&version);
-+
-+#if defined(CONFIG_COMPAT)
-+		if (compat)
-+		{
-+			if (copy_to_user(
-+				(ioc_fm_api_version_t *)compat_ptr(arg),
-+				&version, sizeof(version)))
-+				err = E_READ_FAILED;
-+		}
-+		else
-+#endif
-+		{
-+			if (copy_to_user((ioc_fm_api_version_t *)arg,
-+				&version, sizeof(version)))
-+				err = E_READ_FAILED;
-+		}
-+	}
-+	break;
-+
-+        case FM_IOC_CTRL_MON_START:
-+        {
-+            FM_CtrlMonStart(p_LnxWrpFmDev->h_Dev);
-+        }
-+        break;
-+
-+        case FM_IOC_CTRL_MON_STOP:
-+        {
-+            FM_CtrlMonStop(p_LnxWrpFmDev->h_Dev);
-+        }
-+        break;
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_IOC_CTRL_MON_GET_COUNTERS_COMPAT:
-+#endif
-+        case FM_IOC_CTRL_MON_GET_COUNTERS:
-+        {
-+            ioc_fm_ctrl_mon_counters_params_t param;
-+            t_FmCtrlMon mon;
-+
-+#if defined(CONFIG_COMPAT)
-+            ioc_compat_fm_ctrl_mon_counters_params_t compat_param;
-+
-+            if (compat)
-+            {
-+                if (copy_from_user(&compat_param, (void *)compat_ptr(arg),
-+                            sizeof(compat_param)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+                param.fm_ctrl_index = compat_param.fm_ctrl_index;
-+                param.p_mon = (fm_ctrl_mon_t *)compat_ptr(compat_param.p_mon);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(&param, (void *)arg, sizeof(ioc_fm_ctrl_mon_counters_params_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            if (FM_CtrlMonGetCounters(p_LnxWrpFmDev->h_Dev, param.fm_ctrl_index, &mon))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+            if (copy_to_user(param.p_mon, &mon, sizeof(t_FmCtrlMon)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+        }
-+        break;
-+
-+        default:
-+            return LnxwrpFmPcdIOCTL(p_LnxWrpFmDev, cmd, arg, compat);
-+    }
-+
-+    if (err)
-+        RETURN_ERROR(MINOR, E_INVALID_OPERATION, ("IOCTL FM"));
-+
-+    return E_OK;
-+}
-+
-+t_Error LnxwrpFmPortIOCTL(t_LnxWrpFmPortDev *p_LnxWrpFmPortDev, unsigned int cmd, unsigned long arg, bool compat)
-+{
-+    t_Error err = E_OK;
-+
-+    _fm_ioctl_dbg("cmd:0x%08x(type:0x%02x, nr:%u).\n",
-+        cmd, _IOC_TYPE(cmd), _IOC_NR(cmd) - 70);
-+
-+    switch (cmd)
-+    {
-+        case FM_PORT_IOC_DISABLE:
-+            FM_PORT_Disable(p_LnxWrpFmPortDev->h_Dev);
-+            /* deliberately ignoring error codes here */
-+            return E_OK;
-+
-+        case FM_PORT_IOC_ENABLE:
-+            FM_PORT_Enable(p_LnxWrpFmPortDev->h_Dev);
-+            /* deliberately ignoring error codes here */
-+            return E_OK;
-+
-+        case FM_PORT_IOC_SET_ERRORS_ROUTE:
-+        {
-+            ioc_fm_port_frame_err_select_t errs;
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (get_user(errs, (ioc_fm_port_frame_err_select_t*)compat_ptr(arg)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+            else
-+#endif
-+            {
-+                if (get_user(errs, (ioc_fm_port_frame_err_select_t*)arg))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            err = FM_PORT_SetErrorsRoute(p_LnxWrpFmPortDev->h_Dev, (fmPortFrameErrSelect_t)errs);
-+            break;
-+        }
-+
-+        case FM_PORT_IOC_SET_RATE_LIMIT:
-+        {
-+            ioc_fm_port_rate_limit_t *param;
-+
-+            param = (ioc_fm_port_rate_limit_t *) XX_Malloc(sizeof(ioc_fm_port_rate_limit_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PORT"));
-+
-+            memset(param, 0, sizeof(ioc_fm_port_rate_limit_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (copy_from_user(param, (ioc_fm_port_rate_limit_t *)compat_ptr(arg), sizeof(ioc_fm_port_rate_limit_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_port_rate_limit_t *)arg, sizeof(ioc_fm_port_rate_limit_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            err =  FM_PORT_SetRateLimit(p_LnxWrpFmPortDev->h_Dev, (t_FmPortRateLimit *)param);
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+        case FM_PORT_IOC_REMOVE_RATE_LIMIT:
-+            FM_PORT_DeleteRateLimit(p_LnxWrpFmPortDev->h_Dev);
-+            /* deliberately ignoring error codes here */
-+            return E_OK;
-+
-+        case FM_PORT_IOC_ALLOC_PCD_FQIDS:
-+        {
-+            ioc_fm_port_pcd_fqids_params_t *param;
-+
-+            if (!p_LnxWrpFmPortDev->pcd_owner_params.cba)
-+                RETURN_ERROR(MINOR, E_INVALID_STATE, ("No one to listen on this PCD!!!"));
-+
-+            param = (ioc_fm_port_pcd_fqids_params_t *) XX_Malloc(sizeof(ioc_fm_port_pcd_fqids_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PORT"));
-+
-+            memset(param, 0, sizeof(ioc_fm_port_pcd_fqids_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (copy_from_user(param, (ioc_fm_port_pcd_fqids_params_t *)compat_ptr(arg),
-+                                    sizeof(ioc_fm_port_pcd_fqids_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_port_pcd_fqids_params_t *)arg,
-+                                    sizeof(ioc_fm_port_pcd_fqids_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            if (p_LnxWrpFmPortDev->pcd_owner_params.cba(p_LnxWrpFmPortDev->pcd_owner_params.dev,
-+                                                        param->num_fqids,
-+                                                        param->alignment,
-+                                                        &param->base_fqid))
-+            {
-+                XX_Free(param);
-+                RETURN_ERROR(MINOR, E_INVALID_STATE, ("can't allocate fqids for PCD!!!"));
-+            }
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (copy_to_user((ioc_fm_port_pcd_fqids_params_t *)compat_ptr(arg),
-+                                  param, sizeof(ioc_fm_port_pcd_fqids_params_t)))
-+                    err = E_READ_FAILED;
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_to_user((ioc_fm_port_pcd_fqids_params_t *)arg,
-+                                  param, sizeof(ioc_fm_port_pcd_fqids_params_t)))
-+                    err = E_READ_FAILED;
-+            }
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+        case FM_PORT_IOC_FREE_PCD_FQIDS:
-+        {
-+            uint32_t base_fqid;
-+
-+            if (!p_LnxWrpFmPortDev->pcd_owner_params.cbf)
-+                RETURN_ERROR(MINOR, E_INVALID_STATE, ("No one to listen on this PCD!!!"));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (get_user(base_fqid, (uint32_t*) compat_ptr(arg)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+            else
-+#endif
-+            {
-+                if (get_user(base_fqid, (uint32_t*)arg))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            if (p_LnxWrpFmPortDev->pcd_owner_params.cbf(p_LnxWrpFmPortDev->pcd_owner_params.dev, base_fqid))
-+               err = E_WRITE_FAILED;
-+
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PORT_IOC_SET_PCD_COMPAT:
-+#endif
-+        case FM_PORT_IOC_SET_PCD:
-+        {
-+            ioc_fm_port_pcd_params_t      *port_pcd_params;
-+            ioc_fm_port_pcd_prs_params_t  *port_pcd_prs_params;
-+            ioc_fm_port_pcd_cc_params_t   *port_pcd_cc_params;
-+            ioc_fm_port_pcd_kg_params_t   *port_pcd_kg_params;
-+            ioc_fm_port_pcd_plcr_params_t *port_pcd_plcr_params;
-+
-+            port_pcd_params = (ioc_fm_port_pcd_params_t *) XX_Malloc(
-+                    sizeof(ioc_fm_port_pcd_params_t) +
-+                    sizeof(ioc_fm_port_pcd_prs_params_t) +
-+                    sizeof(ioc_fm_port_pcd_cc_params_t) +
-+                    sizeof(ioc_fm_port_pcd_kg_params_t) +
-+                    sizeof(ioc_fm_port_pcd_plcr_params_t));
-+            if (!port_pcd_params)
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PORT"));
-+
-+            memset(port_pcd_params, 0,
-+                    sizeof(ioc_fm_port_pcd_params_t) +
-+                    sizeof(ioc_fm_port_pcd_prs_params_t) +
-+                    sizeof(ioc_fm_port_pcd_cc_params_t) +
-+                    sizeof(ioc_fm_port_pcd_kg_params_t) +
-+                    sizeof(ioc_fm_port_pcd_plcr_params_t));
-+
-+            port_pcd_prs_params  = (ioc_fm_port_pcd_prs_params_t *)  (port_pcd_params + 1);
-+            port_pcd_cc_params   = (ioc_fm_port_pcd_cc_params_t *)   (port_pcd_prs_params + 1);
-+            port_pcd_kg_params   = (ioc_fm_port_pcd_kg_params_t *)   (port_pcd_cc_params + 1);
-+            port_pcd_plcr_params = (ioc_fm_port_pcd_plcr_params_t *) (port_pcd_kg_params + 1);
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_port_pcd_params_t      *compat_port_pcd_params;
-+                ioc_fm_port_pcd_prs_params_t         *same_port_pcd_prs_params;
-+                ioc_compat_fm_port_pcd_cc_params_t   *compat_port_pcd_cc_params;
-+                ioc_compat_fm_port_pcd_kg_params_t   *compat_port_pcd_kg_params;
-+                ioc_compat_fm_port_pcd_plcr_params_t *compat_port_pcd_plcr_params;
-+
-+                compat_port_pcd_params = (ioc_compat_fm_port_pcd_params_t *) XX_Malloc(
-+                                sizeof(ioc_compat_fm_port_pcd_params_t) +
-+                                sizeof(ioc_fm_port_pcd_prs_params_t) +
-+                                sizeof(ioc_compat_fm_port_pcd_cc_params_t) +
-+                                sizeof(ioc_compat_fm_port_pcd_kg_params_t) +
-+                                sizeof(ioc_compat_fm_port_pcd_plcr_params_t));
-+                if (!compat_port_pcd_params)
-+                {
-+                    XX_Free(port_pcd_params);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PORT"));
-+                }
-+
-+                memset(compat_port_pcd_params, 0,
-+                        sizeof(ioc_compat_fm_port_pcd_params_t) +
-+                        sizeof(ioc_fm_port_pcd_prs_params_t) +
-+                        sizeof(ioc_compat_fm_port_pcd_cc_params_t) +
-+                        sizeof(ioc_compat_fm_port_pcd_kg_params_t) +
-+                        sizeof(ioc_compat_fm_port_pcd_plcr_params_t));
-+                same_port_pcd_prs_params    = (ioc_fm_port_pcd_prs_params_t *) (compat_port_pcd_params + 1);
-+                compat_port_pcd_cc_params   = (ioc_compat_fm_port_pcd_cc_params_t *) (same_port_pcd_prs_params + 1);
-+                compat_port_pcd_kg_params   = (ioc_compat_fm_port_pcd_kg_params_t *) (compat_port_pcd_cc_params + 1);
-+                compat_port_pcd_plcr_params = (ioc_compat_fm_port_pcd_plcr_params_t *) (compat_port_pcd_kg_params + 1);
-+
-+                if (copy_from_user(compat_port_pcd_params,
-+                            (ioc_compat_fm_port_pcd_params_t*) compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_port_pcd_params_t)))
-+                    err = E_WRITE_FAILED;
-+
-+                while (!err) /* pseudo-while */
-+                {
-+                    /* set pointers from where to copy from: */
-+                    port_pcd_params->p_prs_params          = compat_ptr(compat_port_pcd_params->p_prs_params); /* same structure */
-+                    port_pcd_params->p_cc_params           = compat_ptr(compat_port_pcd_params->p_cc_params);
-+                    port_pcd_params->p_kg_params           = compat_ptr(compat_port_pcd_params->p_kg_params);
-+                    port_pcd_params->p_plcr_params         = compat_ptr(compat_port_pcd_params->p_plcr_params);
-+                    port_pcd_params->p_ip_reassembly_manip = compat_ptr(compat_port_pcd_params->p_ip_reassembly_manip);
-+#if (DPAA_VERSION >= 11)
-+                    port_pcd_params->p_capwap_reassembly_manip = compat_ptr(compat_port_pcd_params->p_capwap_reassembly_manip);
-+#endif
-+                    /* the prs member is the same, no compat structure...memcpy only */
-+                    if (port_pcd_params->p_prs_params)
-+                    {
-+                        if (copy_from_user(same_port_pcd_prs_params,
-+                                port_pcd_params->p_prs_params,
-+                                sizeof(ioc_fm_port_pcd_prs_params_t)))
-+                        {
-+                            err = E_WRITE_FAILED;
-+                            break; /* from pseudo-while */
-+                        }
-+
-+                        memcpy(port_pcd_prs_params, same_port_pcd_prs_params, sizeof(ioc_fm_port_pcd_prs_params_t));
-+                        port_pcd_params->p_prs_params = port_pcd_prs_params;
-+                    }
-+
-+                    if (port_pcd_params->p_cc_params)
-+                    {
-+                        if (copy_from_user(compat_port_pcd_cc_params,
-+                                port_pcd_params->p_cc_params,
-+                                sizeof(ioc_compat_fm_port_pcd_cc_params_t)))
-+                        {
-+                            err = E_WRITE_FAILED;
-+                            break; /* from pseudo-while */
-+                        }
-+
-+                        port_pcd_params->p_cc_params = port_pcd_cc_params;
-+                    }
-+
-+                    if (port_pcd_params->p_kg_params)
-+                    {
-+                        if (copy_from_user(compat_port_pcd_kg_params,
-+                                port_pcd_params->p_kg_params,
-+                                sizeof(ioc_compat_fm_port_pcd_kg_params_t)))
-+                        {
-+                            err = E_WRITE_FAILED;
-+                            break; /* from pseudo-while */
-+                        }
-+
-+                        port_pcd_params->p_kg_params = port_pcd_kg_params;
-+                    }
-+
-+                    if (port_pcd_params->p_plcr_params)
-+                    {
-+                        if (copy_from_user(compat_port_pcd_plcr_params,
-+                                    port_pcd_params->p_plcr_params,
-+                                    sizeof(ioc_compat_fm_port_pcd_plcr_params_t)))
-+                        {
-+                            err = E_WRITE_FAILED;
-+                            break; /* from pseudo-while */
-+                        }
-+
-+                        port_pcd_params->p_plcr_params = port_pcd_plcr_params;
-+                    }
-+
-+                    break; /* pseudo-while: always run once! */
-+                }
-+
-+                if (!err)
-+                    compat_copy_fm_port_pcd(compat_port_pcd_params, port_pcd_params, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_port_pcd_params);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(port_pcd_params,
-+                            (ioc_fm_port_pcd_params_t*) arg,
-+                            sizeof(ioc_fm_port_pcd_params_t)))
-+                    err = E_WRITE_FAILED;
-+
-+                while (!err) /* pseudo-while */
-+                {
-+                    if (port_pcd_params->p_prs_params)
-+                    {
-+                        if (copy_from_user(port_pcd_prs_params,
-+                                port_pcd_params->p_prs_params,
-+                                sizeof(ioc_fm_port_pcd_prs_params_t)))
-+                        {
-+                            err = E_WRITE_FAILED;
-+                            break; /* from pseudo-while */
-+                        }
-+
-+                        port_pcd_params->p_prs_params = port_pcd_prs_params;
-+                    }
-+
-+                    if (port_pcd_params->p_cc_params)
-+                    {
-+                        if (copy_from_user(port_pcd_cc_params,
-+                                port_pcd_params->p_cc_params,
-+                                sizeof(ioc_fm_port_pcd_cc_params_t)))
-+                        {
-+                            err = E_WRITE_FAILED;
-+                            break; /* from pseudo-while */
-+                        }
-+
-+                        port_pcd_params->p_cc_params = port_pcd_cc_params;
-+                    }
-+
-+                    if (port_pcd_params->p_kg_params)
-+                    {
-+                        if (copy_from_user(port_pcd_kg_params,
-+                                port_pcd_params->p_kg_params,
-+                                sizeof(ioc_fm_port_pcd_kg_params_t)))
-+                        {
-+                            err = E_WRITE_FAILED;
-+                            break; /* from pseudo-while */
-+                        }
-+
-+                        port_pcd_params->p_kg_params = port_pcd_kg_params;
-+                    }
-+
-+                    if (port_pcd_params->p_plcr_params)
-+                    {
-+                        if (copy_from_user(port_pcd_plcr_params,
-+                                port_pcd_params->p_plcr_params,
-+                                sizeof(ioc_fm_port_pcd_plcr_params_t)))
-+                        {
-+                            err = E_WRITE_FAILED;
-+                            break; /* from pseudo-while */
-+                        }
-+
-+                        port_pcd_params->p_plcr_params = port_pcd_plcr_params;
-+                    }
-+
-+                    break; /* pseudo-while: always run once! */
-+                }
-+            }
-+
-+            if (!err)
-+                err = FM_PORT_SetPCD(p_LnxWrpFmPortDev->h_Dev, (t_FmPortPcdParams*) port_pcd_params);
-+
-+            XX_Free(port_pcd_params);
-+            break;
-+        }
-+
-+        case FM_PORT_IOC_DELETE_PCD:
-+            err = FM_PORT_DeletePCD(p_LnxWrpFmPortDev->h_Dev);
-+            break;
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PORT_IOC_PCD_KG_MODIFY_INITIAL_SCHEME_COMPAT:
-+#endif
-+        case FM_PORT_IOC_PCD_KG_MODIFY_INITIAL_SCHEME:
-+        {
-+            ioc_fm_pcd_kg_scheme_select_t *param;
-+
-+            param = (ioc_fm_pcd_kg_scheme_select_t *) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_kg_scheme_select_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PORT"));
-+
-+            memset(param, 0, sizeof(ioc_fm_pcd_kg_scheme_select_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_kg_scheme_select_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_pcd_kg_scheme_select_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_pcd_kg_scheme_select_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PORT"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_pcd_kg_scheme_select_t));
-+                if (copy_from_user(compat_param,
-+                                   (ioc_compat_fm_pcd_kg_scheme_select_t *) compat_ptr(arg),
-+                                   sizeof(ioc_compat_fm_pcd_kg_scheme_select_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_kg_scheme_select(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_kg_scheme_select_t *)arg,
-+                                   sizeof(ioc_fm_pcd_kg_scheme_select_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            err =  FM_PORT_PcdKgModifyInitialScheme(p_LnxWrpFmPortDev->h_Dev, (t_FmPcdKgSchemeSelect *)param);
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PORT_IOC_PCD_PLCR_MODIFY_INITIAL_PROFILE_COMPAT:
-+#endif
-+        case FM_PORT_IOC_PCD_PLCR_MODIFY_INITIAL_PROFILE:
-+        {
-+            ioc_fm_obj_t id;
-+
-+            memset(&id, 0 , sizeof(ioc_fm_obj_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_obj_t compat_id;
-+
-+                if (copy_from_user(&compat_id, (ioc_compat_fm_obj_t *) compat_ptr(arg), sizeof(ioc_compat_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+                id.obj = compat_ptr(compat_id.obj);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(&id, (ioc_fm_obj_t *) arg, sizeof(ioc_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            err = FM_PORT_PcdPlcrModifyInitialProfile(p_LnxWrpFmPortDev->h_Dev, id.obj);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PORT_IOC_PCD_KG_BIND_SCHEMES_COMPAT:
-+#endif
-+        case FM_PORT_IOC_PCD_KG_BIND_SCHEMES:
-+        {
-+            ioc_fm_pcd_port_schemes_params_t *param;
-+
-+            param = (ioc_fm_pcd_port_schemes_params_t *) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_port_schemes_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PORT"));
-+
-+            memset(param, 0 , sizeof(ioc_fm_pcd_port_schemes_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_port_schemes_params_t compat_param;
-+
-+                if (copy_from_user(&compat_param,
-+                            (ioc_compat_fm_pcd_port_schemes_params_t *) compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_port_schemes_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_kg_schemes_params(&compat_param, param, COMPAT_US_TO_K);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_port_schemes_params_t *) arg,
-+                            sizeof(ioc_fm_pcd_port_schemes_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            err = FM_PORT_PcdKgBindSchemes(p_LnxWrpFmPortDev->h_Dev, (t_FmPcdPortSchemesParams *)param);
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PORT_IOC_PCD_KG_UNBIND_SCHEMES_COMPAT:
-+#endif
-+        case FM_PORT_IOC_PCD_KG_UNBIND_SCHEMES:
-+        {
-+            ioc_fm_pcd_port_schemes_params_t *param;
-+
-+            param = (ioc_fm_pcd_port_schemes_params_t *) XX_Malloc(
-+                    sizeof(ioc_fm_pcd_port_schemes_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PORT"));
-+
-+            memset(param, 0 , sizeof(ioc_fm_pcd_port_schemes_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_pcd_port_schemes_params_t compat_param;
-+
-+                if (copy_from_user(&compat_param,
-+                            (ioc_compat_fm_pcd_port_schemes_params_t *) compat_ptr(arg),
-+                            sizeof(ioc_compat_fm_pcd_port_schemes_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_pcd_kg_schemes_params(&compat_param, param, COMPAT_US_TO_K);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_pcd_port_schemes_params_t *) arg,
-+                            sizeof(ioc_fm_pcd_port_schemes_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            err =  FM_PORT_PcdKgUnbindSchemes(p_LnxWrpFmPortDev->h_Dev, (t_FmPcdPortSchemesParams *)param);
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+        case FM_PORT_IOC_PCD_PLCR_ALLOC_PROFILES:
-+        {
-+            uint16_t num;
-+            if (get_user(num, (uint16_t*) arg))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+            err = FM_PORT_PcdPlcrAllocProfiles(p_LnxWrpFmPortDev->h_Dev, num);
-+            break;
-+        }
-+
-+        case FM_PORT_IOC_PCD_PLCR_FREE_PROFILES:
-+            err = FM_PORT_PcdPlcrFreeProfiles(p_LnxWrpFmPortDev->h_Dev);
-+            break;
-+
-+        case FM_PORT_IOC_DETACH_PCD:
-+            err = FM_PORT_DetachPCD(p_LnxWrpFmPortDev->h_Dev);
-+            break;
-+
-+        case FM_PORT_IOC_ATTACH_PCD:
-+            err = FM_PORT_AttachPCD(p_LnxWrpFmPortDev->h_Dev);
-+            break;
-+
-+#if defined(CONFIG_COMPAT)
-+        case FM_PORT_IOC_PCD_CC_MODIFY_TREE_COMPAT:
-+#endif
-+        case FM_PORT_IOC_PCD_CC_MODIFY_TREE:
-+        {
-+            ioc_fm_obj_t id;
-+
-+            memset(&id, 0 , sizeof(ioc_fm_obj_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_obj_t compat_id;
-+
-+                if (copy_from_user(&compat_id, (ioc_compat_fm_obj_t *) compat_ptr(arg), sizeof(ioc_compat_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+                compat_copy_fm_port_pcd_modify_tree(&compat_id, &id, COMPAT_US_TO_K);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(&id, (ioc_fm_obj_t *) arg, sizeof(ioc_fm_obj_t)))
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            err = FM_PORT_PcdCcModifyTree(p_LnxWrpFmPortDev->h_Dev, id.obj);
-+            break;
-+        }
-+
-+        case FM_PORT_IOC_ADD_CONGESTION_GRPS:
-+        case FM_PORT_IOC_REMOVE_CONGESTION_GRPS:
-+        {
-+            ioc_fm_port_congestion_groups_t *param;
-+
-+            param = (ioc_fm_port_congestion_groups_t*) XX_Malloc(sizeof(ioc_fm_port_congestion_groups_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PORT"));
-+
-+            memset(param, 0, sizeof(ioc_fm_port_congestion_groups_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (copy_from_user(param, (t_FmPortCongestionGrps*) compat_ptr(arg),
-+                            sizeof(t_FmPortCongestionGrps)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+            else
-+#endif /* CONFIG_COMPAT */
-+            {
-+                if (copy_from_user(param, (t_FmPortCongestionGrps*) arg,
-+                            sizeof(t_FmPortCongestionGrps)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            err = (cmd == FM_PORT_IOC_ADD_CONGESTION_GRPS)
-+                ? FM_PORT_AddCongestionGrps(p_LnxWrpFmPortDev->h_Dev, (t_FmPortCongestionGrps*) param)
-+                : FM_PORT_RemoveCongestionGrps(p_LnxWrpFmPortDev->h_Dev, (t_FmPortCongestionGrps*) param)
-+                ;
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+        case FM_PORT_IOC_ADD_RX_HASH_MAC_ADDR:
-+        case FM_PORT_IOC_REMOVE_RX_HASH_MAC_ADDR:
-+        {
-+            ioc_fm_port_mac_addr_params_t *param;
-+
-+            param = (ioc_fm_port_mac_addr_params_t*) XX_Malloc(
-+                    sizeof(ioc_fm_port_mac_addr_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PORT"));
-+
-+            memset(param, 0, sizeof(ioc_fm_port_mac_addr_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                if (copy_from_user(param, (ioc_fm_port_mac_addr_params_t*) compat_ptr(arg),
-+                            sizeof(ioc_fm_port_mac_addr_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+            else
-+#endif /* CONFIG_COMPAT */
-+            {
-+                if (copy_from_user(param, (ioc_fm_port_mac_addr_params_t*) arg,
-+                            sizeof(ioc_fm_port_mac_addr_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            if (p_LnxWrpFmPortDev->pcd_owner_params.dev)
-+            {
-+                int id = -1;
-+
-+                switch(p_LnxWrpFmPortDev->settings.param.portType)
-+                {
-+                    case e_FM_PORT_TYPE_RX:
-+                    case e_FM_PORT_TYPE_TX:
-+                        id = p_LnxWrpFmPortDev->id;
-+                    break;
-+                    case e_FM_PORT_TYPE_RX_10G:
-+                    case e_FM_PORT_TYPE_TX_10G:
-+                        id = p_LnxWrpFmPortDev->id + FM_MAX_NUM_OF_1G_MACS;
-+                    break;
-+                    default:
-+                        err = E_NOT_AVAILABLE;
-+                        REPORT_ERROR(MINOR, err, ("Attempt to add/remove hash MAC addr. to/from MAC-less port!"));
-+                }
-+                if (id >= 0)
-+                {
-+                    t_LnxWrpFmDev *fm = (t_LnxWrpFmDev *)p_LnxWrpFmPortDev->h_LnxWrpFmDev;
-+                    t_Handle mac_handle = fm->macs[id].h_Dev;
-+
-+                    err = (cmd == FM_PORT_IOC_ADD_RX_HASH_MAC_ADDR)
-+                        ? FM_MAC_AddHashMacAddr(mac_handle, (t_EnetAddr*) param)
-+                        : FM_MAC_RemoveHashMacAddr(mac_handle, (t_EnetAddr*) param);
-+                }
-+            }
-+            else
-+            {
-+                err = E_NOT_AVAILABLE;
-+                REPORT_ERROR(MINOR, err, ("Port not initialized or other error!?!?"));
-+            }
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+        case FM_PORT_IOC_SET_TX_PAUSE_FRAMES:
-+        {
-+            t_LnxWrpFmDev *p_LnxWrpFmDev =
-+                    (t_LnxWrpFmDev *)p_LnxWrpFmPortDev->h_LnxWrpFmDev;
-+            ioc_fm_port_tx_pause_frames_params_t param;
-+            int mac_id = p_LnxWrpFmPortDev->id;
-+
-+            if(&p_LnxWrpFmDev->txPorts[mac_id] != p_LnxWrpFmPortDev)
-+                mac_id += FM_MAX_NUM_OF_1G_MACS; /* 10G port */
-+
-+            if (copy_from_user(&param, (ioc_fm_port_tx_pause_frames_params_t *)arg,
-+                        sizeof(ioc_fm_port_tx_pause_frames_params_t)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+            if (p_LnxWrpFmDev && p_LnxWrpFmDev->macs[mac_id].h_Dev)
-+            {
-+                FM_MAC_SetTxPauseFrames(p_LnxWrpFmDev->macs[mac_id].h_Dev,
-+                        param.priority,
-+                        param.pause_time,
-+                        param.thresh_time);
-+            }
-+            else
-+            {
-+                err = E_NOT_AVAILABLE;
-+                REPORT_ERROR(MINOR, err, ("Port not initialized or other error!"));
-+            }
-+
-+            break;
-+        }
-+
-+        case FM_PORT_IOC_CONFIG_BUFFER_PREFIX_CONTENT:
-+        {
-+            ioc_fm_buffer_prefix_content_t *param;
-+
-+            param = (ioc_fm_buffer_prefix_content_t*) XX_Malloc(sizeof(ioc_fm_buffer_prefix_content_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PORT"));
-+
-+            memset(param, 0, sizeof(ioc_fm_buffer_prefix_content_t));
-+
-+            if (copy_from_user(param, (ioc_fm_buffer_prefix_content_t*) arg,
-+                        sizeof(ioc_fm_buffer_prefix_content_t)))
-+            {
-+                XX_Free(param);
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            if (FM_PORT_ConfigBufferPrefixContent(p_LnxWrpFmPortDev->h_Dev,
-+                    (t_FmBufferPrefixContent *)param))
-+            {
-+                XX_Free(param);
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            XX_Free(param);
-+            break;
-+        }
-+
-+#if (DPAA_VERSION >= 11)
-+#if defined(CONFIG_COMPAT)
-+        case FM_PORT_IOC_VSP_ALLOC_COMPAT:
-+#endif
-+        case FM_PORT_IOC_VSP_ALLOC:
-+        {
-+            ioc_fm_port_vsp_alloc_params_t *param;
-+            t_LnxWrpFmDev *p_LnxWrpFmDev;
-+            t_LnxWrpFmPortDev *p_LnxWrpFmTxPortDev;
-+
-+            param = (ioc_fm_port_vsp_alloc_params_t *) XX_Malloc(
-+                    sizeof(ioc_fm_port_vsp_alloc_params_t));
-+            if (!param)
-+                RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PORT"));
-+
-+            memset(param, 0, sizeof(ioc_fm_port_vsp_alloc_params_t));
-+
-+#if defined(CONFIG_COMPAT)
-+            if (compat)
-+            {
-+                ioc_compat_fm_port_vsp_alloc_params_t *compat_param;
-+
-+                compat_param = (ioc_compat_fm_port_vsp_alloc_params_t *) XX_Malloc(
-+                        sizeof(ioc_compat_fm_port_vsp_alloc_params_t));
-+                if (!compat_param)
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_NO_MEMORY, ("IOCTL FM PORT"));
-+                }
-+
-+                memset(compat_param, 0, sizeof(ioc_compat_fm_port_vsp_alloc_params_t));
-+                if (copy_from_user(compat_param,
-+                                   (ioc_compat_fm_port_vsp_alloc_params_t *) compat_ptr(arg),
-+                                   sizeof(ioc_compat_fm_port_vsp_alloc_params_t)))
-+                {
-+                    XX_Free(compat_param);
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+
-+                compat_copy_fm_port_vsp_alloc_params(compat_param, param, COMPAT_US_TO_K);
-+
-+                XX_Free(compat_param);
-+            }
-+            else
-+#endif
-+            {
-+                if (copy_from_user(param, (ioc_fm_port_vsp_alloc_params_t *)arg,
-+                                   sizeof(ioc_fm_port_vsp_alloc_params_t)))
-+                {
-+                    XX_Free(param);
-+                    RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+                }
-+            }
-+
-+            /* Userspace may not have the Tx port t_handle when issuing the IOCTL */
-+            if (p_LnxWrpFmPortDev->settings.param.portType == e_FM_PORT_TYPE_RX ||
-+                    p_LnxWrpFmPortDev->settings.param.portType == e_FM_PORT_TYPE_RX_10G)
-+            {
-+                /* Determine the Tx port t_Handle from the Rx port id */
-+                p_LnxWrpFmDev = p_LnxWrpFmPortDev->h_LnxWrpFmDev;
-+                p_LnxWrpFmTxPortDev = &p_LnxWrpFmDev->txPorts[p_LnxWrpFmPortDev->id];
-+                param->p_fm_tx_port = p_LnxWrpFmTxPortDev->h_Dev;
-+            }
-+
-+            if (FM_PORT_VSPAlloc(p_LnxWrpFmPortDev->h_Dev, (t_FmPortVSPAllocParams *)param))
-+            {
-+                XX_Free(param);
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+            }
-+
-+            XX_Free(param);
-+            break;
-+        }
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+        case FM_PORT_IOC_GET_MAC_STATISTICS:
-+        {
-+            t_LnxWrpFmDev *p_LnxWrpFmDev =
-+                    (t_LnxWrpFmDev *)p_LnxWrpFmPortDev->h_LnxWrpFmDev;
-+            ioc_fm_port_mac_statistics_t param;
-+            int mac_id = p_LnxWrpFmPortDev->id;
-+
-+            if (!p_LnxWrpFmDev)
-+                RETURN_ERROR(MINOR, E_NOT_AVAILABLE, ("Port not initialized or other error!"));
-+
-+            if (&p_LnxWrpFmDev->txPorts[mac_id] != p_LnxWrpFmPortDev &&
-+                &p_LnxWrpFmDev->rxPorts[mac_id] != p_LnxWrpFmPortDev)
-+                mac_id += FM_MAX_NUM_OF_1G_MACS; /* 10G port */
-+
-+            if (!p_LnxWrpFmDev->macs[mac_id].h_Dev)
-+                RETURN_ERROR(MINOR, E_NOT_AVAILABLE, ("Port not initialized or other error!"));
-+
-+            if (FM_MAC_GetStatistics(p_LnxWrpFmDev->macs[mac_id].h_Dev,
-+                        (t_FmMacStatistics *)&param))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+            if (copy_to_user((ioc_fm_port_mac_statistics_t *)arg, &param,
-+                        sizeof(ioc_fm_port_mac_statistics_t)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+            break;
-+        }
-+
-+        case FM_PORT_IOC_GET_BMI_COUNTERS:
-+        {
-+            t_LnxWrpFmDev *p_LnxWrpFmDev =
-+                    (t_LnxWrpFmDev *)p_LnxWrpFmPortDev->h_LnxWrpFmDev;
-+            ioc_fm_port_bmi_stats_t param;
-+
-+            if (!p_LnxWrpFmDev)
-+                RETURN_ERROR(MINOR, E_NOT_AVAILABLE, ("Port not initialized or other error!"));
-+
-+            if (FM_PORT_GetBmiCounters(p_LnxWrpFmPortDev->h_Dev,
-+                        (t_FmPortBmiStats *)&param))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+            if (copy_to_user((ioc_fm_port_bmi_stats_t *)arg, &param,
-+                        sizeof(ioc_fm_port_bmi_stats_t)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+            break;
-+        }
-+
-+        default:
-+            RETURN_ERROR(MINOR, E_INVALID_SELECTION,
-+                ("invalid ioctl: cmd:0x%08x(type:0x%02x, nr:0x%02x.\n",
-+                cmd, _IOC_TYPE(cmd), _IOC_NR(cmd)));
-+    }
-+
-+    if (err)
-+        RETURN_ERROR(MINOR, E_INVALID_OPERATION, ("IOCTL FM PORT"));
-+
-+    return E_OK;
-+}
-+
-+/*****************************************************************************/
-+/*               API routines for the FM Linux Device                        */
-+/*****************************************************************************/
-+
-+static int fm_open(struct inode *inode, struct file *file)
-+{
-+    t_LnxWrpFmDev       *p_LnxWrpFmDev = NULL;
-+    t_LnxWrpFmPortDev   *p_LnxWrpFmPortDev = NULL;
-+    unsigned int        major = imajor(inode);
-+    unsigned int        minor = iminor(inode);
-+    struct device_node  *fm_node;
-+    static struct of_device_id fm_node_of_match[] = {
-+        { .compatible = "fsl,fman", },
-+        { /* end of list */ },
-+    };
-+
-+    DBG(TRACE, ("Opening minor - %d - ", minor));
-+
-+    if (file->private_data != NULL)
-+        return 0;
-+
-+    /* Get all the FM nodes */
-+    for_each_matching_node(fm_node, fm_node_of_match) {
-+        struct platform_device    *of_dev;
-+
-+        of_dev = of_find_device_by_node(fm_node);
-+        if (unlikely(of_dev == NULL)) {
-+            REPORT_ERROR(MAJOR, E_INVALID_VALUE, ("fm id!"));
-+            return -ENXIO;
-+        }
-+
-+        p_LnxWrpFmDev = (t_LnxWrpFmDev *)fm_bind(&of_dev->dev);
-+        if (p_LnxWrpFmDev->major == major)
-+            break;
-+        fm_unbind((struct fm *)p_LnxWrpFmDev);
-+        p_LnxWrpFmDev = NULL;
-+    }
-+
-+    if (!p_LnxWrpFmDev)
-+        return -ENODEV;
-+
-+    if (minor == DEV_FM_MINOR_BASE)
-+        file->private_data = p_LnxWrpFmDev;
-+    else if (minor == DEV_FM_PCD_MINOR_BASE)
-+        file->private_data = p_LnxWrpFmDev;
-+    else {
-+        if (minor == DEV_FM_OH_PORTS_MINOR_BASE)
-+            p_LnxWrpFmPortDev = &p_LnxWrpFmDev->hcPort;
-+        else if ((minor > DEV_FM_OH_PORTS_MINOR_BASE) && (minor < DEV_FM_RX_PORTS_MINOR_BASE))
-+            p_LnxWrpFmPortDev = &p_LnxWrpFmDev->opPorts[minor-DEV_FM_OH_PORTS_MINOR_BASE-1];
-+        else if ((minor >= DEV_FM_RX_PORTS_MINOR_BASE) && (minor < DEV_FM_TX_PORTS_MINOR_BASE))
-+            p_LnxWrpFmPortDev = &p_LnxWrpFmDev->rxPorts[minor-DEV_FM_RX_PORTS_MINOR_BASE];
-+        else if ((minor >= DEV_FM_TX_PORTS_MINOR_BASE) && (minor < DEV_FM_MAX_MINORS))
-+            p_LnxWrpFmPortDev = &p_LnxWrpFmDev->txPorts[minor-DEV_FM_TX_PORTS_MINOR_BASE];
-+        else
-+            return -EINVAL;
-+
-+        /* if trying to open port, check if it initialized */
-+        if (!p_LnxWrpFmPortDev->h_Dev)
-+            return -ENODEV;
-+
-+        p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *)fm_port_bind(p_LnxWrpFmPortDev->dev);
-+        file->private_data = p_LnxWrpFmPortDev;
-+        fm_unbind((struct fm *)p_LnxWrpFmDev);
-+    }
-+
-+    if (file->private_data == NULL)
-+         return -ENXIO;
-+
-+    return 0;
-+}
-+
-+static int fm_close(struct inode *inode, struct file *file)
-+{
-+    t_LnxWrpFmDev       *p_LnxWrpFmDev;
-+    t_LnxWrpFmPortDev   *p_LnxWrpFmPortDev;
-+    unsigned int        minor = iminor(inode);
-+    int                 err = 0;
-+
-+    DBG(TRACE, ("Closing minor - %d - ", minor));
-+
-+    if ((minor == DEV_FM_MINOR_BASE) ||
-+        (minor == DEV_FM_PCD_MINOR_BASE))
-+    {
-+        p_LnxWrpFmDev = (t_LnxWrpFmDev*)file->private_data;
-+        if (!p_LnxWrpFmDev)
-+            return -ENODEV;
-+        fm_unbind((struct fm *)p_LnxWrpFmDev);
-+    }
-+    else if (((minor >= DEV_FM_OH_PORTS_MINOR_BASE) && (minor < DEV_FM_RX_PORTS_MINOR_BASE)) ||
-+             ((minor >= DEV_FM_RX_PORTS_MINOR_BASE) && (minor < DEV_FM_TX_PORTS_MINOR_BASE)) ||
-+             ((minor >= DEV_FM_TX_PORTS_MINOR_BASE) && (minor < DEV_FM_MAX_MINORS)))
-+    {
-+        p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev*)file->private_data;
-+        if (!p_LnxWrpFmPortDev)
-+            return -ENODEV;
-+        fm_port_unbind((struct fm_port *)p_LnxWrpFmPortDev);
-+    }
-+
-+    return err;
-+}
-+
-+static int fm_ioctls(unsigned int minor, struct file *file, unsigned int cmd, unsigned long arg, bool compat)
-+{
-+    DBG(TRACE, ("IOCTL minor - %u, cmd - 0x%08x, arg - 0x%08lx \n", minor, cmd, arg));
-+
-+    if ((minor == DEV_FM_MINOR_BASE) ||
-+        (minor == DEV_FM_PCD_MINOR_BASE))
-+    {
-+        t_LnxWrpFmDev *p_LnxWrpFmDev = ((t_LnxWrpFmDev*)file->private_data);
-+        if (!p_LnxWrpFmDev)
-+            return -ENODEV;
-+        if (LnxwrpFmIOCTL(p_LnxWrpFmDev, cmd, arg, compat))
-+            return -EFAULT;
-+    }
-+    else if (((minor >= DEV_FM_OH_PORTS_MINOR_BASE) && (minor < DEV_FM_RX_PORTS_MINOR_BASE)) ||
-+             ((minor >= DEV_FM_RX_PORTS_MINOR_BASE) && (minor < DEV_FM_TX_PORTS_MINOR_BASE)) ||
-+             ((minor >= DEV_FM_TX_PORTS_MINOR_BASE) && (minor < DEV_FM_MAX_MINORS)))
-+    {
-+        t_LnxWrpFmPortDev *p_LnxWrpFmPortDev = ((t_LnxWrpFmPortDev*)file->private_data);
-+        if (!p_LnxWrpFmPortDev)
-+            return -ENODEV;
-+        if (LnxwrpFmPortIOCTL(p_LnxWrpFmPortDev, cmd, arg, compat))
-+            return -EFAULT;
-+    }
-+    else
-+    {
-+        REPORT_ERROR(MINOR, E_INVALID_VALUE, ("minor"));
-+        return -ENODEV;
-+    }
-+
-+    return 0;
-+}
-+
-+#ifdef CONFIG_COMPAT
-+static long fm_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+    unsigned int minor = iminor(file->f_path.dentry->d_inode);
-+    long res;
-+
-+    fm_mutex_lock();
-+    res = fm_ioctls(minor, file, cmd, arg, true);
-+    fm_mutex_unlock();
-+
-+    return res;
-+}
-+#endif
-+
-+static long fm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+    unsigned int minor = iminor(file->f_path.dentry->d_inode);
-+    long res;
-+
-+    fm_mutex_lock();
-+    res = fm_ioctls(minor, file, cmd, arg, false);
-+    fm_mutex_unlock();
-+
-+    return res;
-+}
-+
-+/* Globals for FM character device */
-+struct file_operations fm_fops =
-+{
-+    .owner =            THIS_MODULE,
-+    .unlocked_ioctl =   fm_ioctl,
-+#ifdef CONFIG_COMPAT
-+    .compat_ioctl =     fm_compat_ioctl,
-+#endif
-+    .open =             fm_open,
-+    .release =          fm_close,
-+};
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.c
-@@ -0,0 +1,1297 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/*
-+ @File          lnxwrp_fm_compat_ioctls.c
-+
-+ @Description   FM PCD compat functions
-+
-+*/
-+
-+#if !defined(CONFIG_COMPAT)
-+#error "missing COMPAT layer..."
-+#endif
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/fs.h>
-+#include <linux/cdev.h>
-+#include <linux/device.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <asm/uaccess.h>
-+#include <asm/errno.h>
-+#ifndef CONFIG_FMAN_ARM
-+#include <sysdev/fsl_soc.h>
-+#endif
-+
-+#include "part_ext.h"
-+#include "fm_ioctls.h"
-+#include "fm_pcd_ioctls.h"
-+#include "fm_port_ioctls.h"
-+#include "lnxwrp_ioctls_fm_compat.h"
-+
-+#if defined(FM_COMPAT_DBG)
-+static void hex_dump(void * p_addr, unsigned int size)
-+{
-+   int i;
-+
-+   for(i=0; i<size; i+=16)
-+   {
-+       printk("%p: 0x%08x 0x%08x 0x%08x 0x%08x\n", p_addr + i,
-+           *(unsigned int *)(p_addr + i),
-+           *(unsigned int *)(p_addr + i + 4),
-+           *(unsigned int *)(p_addr + i + 8),
-+           *(unsigned int *)(p_addr + i +12)
-+           );
-+   }
-+}
-+#endif
-+
-+/* maping kernel pointers w/ UserSpace id's { */
-+struct map_node {
-+    void *ptr;
-+    u8 node_type;
-+};
-+
-+static struct map_node compat_ptr2id_array[COMPAT_PTR2ID_ARRAY_MAX] = {{NULL},{FM_MAP_TYPE_UNSPEC}};
-+
-+void compat_del_ptr2id(void *p, enum fm_map_node_type node_type)
-+{
-+    compat_uptr_t k;
-+
-+    _fm_cpt_dbg(COMPAT_GENERIC, "delete (%p)\n", p);
-+
-+    for(k=1; k < COMPAT_PTR2ID_ARRAY_MAX; k++)
-+        if(compat_ptr2id_array[k].ptr == p){
-+            compat_ptr2id_array[k].ptr = NULL;
-+            compat_ptr2id_array[k].node_type = FM_MAP_TYPE_UNSPEC;
-+        }
-+}
-+EXPORT_SYMBOL(compat_del_ptr2id);
-+
-+compat_uptr_t compat_add_ptr2id(void *p, enum fm_map_node_type node_type)
-+{
-+    compat_uptr_t k;
-+
-+    _fm_cpt_dbg(COMPAT_GENERIC, " (%p) do ->\n", p);
-+
-+    if(!p)
-+        return 0;
-+
-+    for(k=1; k < COMPAT_PTR2ID_ARRAY_MAX; k++)
-+        if(compat_ptr2id_array[k].ptr == NULL)
-+        {
-+            compat_ptr2id_array[k].ptr = p;
-+            compat_ptr2id_array[k].node_type = node_type;
-+            _fm_cpt_dbg(COMPAT_GENERIC, "0x%08x \n", k | COMPAT_PTR2ID_WATERMARK);
-+            return k | COMPAT_PTR2ID_WATERMARK;
-+        }
-+
-+    printk(KERN_WARNING "FMan map list full! No more PCD space on kernel!\n");
-+    return 0;
-+}
-+EXPORT_SYMBOL(compat_add_ptr2id);
-+
-+compat_uptr_t compat_get_ptr2id(void *p, enum fm_map_node_type node_type)
-+{
-+    compat_uptr_t k;
-+
-+    _fm_cpt_dbg(COMPAT_GENERIC, " (%p) get -> \n", p);
-+
-+    for(k=1; k < COMPAT_PTR2ID_ARRAY_MAX; k++)
-+        if(compat_ptr2id_array[k].ptr == p &&
-+           compat_ptr2id_array[k].node_type == node_type) {
-+
-+            _fm_cpt_dbg(COMPAT_GENERIC, "0x%08x\n", k | COMPAT_PTR2ID_WATERMARK);
-+            return k | COMPAT_PTR2ID_WATERMARK;
-+        }
-+
-+    return 0;
-+}
-+EXPORT_SYMBOL(compat_get_ptr2id);
-+
-+void *compat_get_id2ptr(compat_uptr_t comp, enum fm_map_node_type node_type)
-+{
-+
-+    _fm_cpt_dbg(COMPAT_GENERIC, " (0x%08x) get -> \n", comp);
-+
-+    if((COMPAT_PTR2ID_WM_MASK & comp) != COMPAT_PTR2ID_WATERMARK) {
-+        _fm_cpt_dbg(COMPAT_GENERIC, "Error, invalid watermark (0x%08x)!\n\n", comp);
-+        dump_stack();
-+        return compat_ptr(comp);
-+    }
-+
-+    comp &= ~COMPAT_PTR2ID_WM_MASK;
-+
-+    if(((0 < comp) && (comp < COMPAT_PTR2ID_ARRAY_MAX) && (compat_ptr2id_array[comp].ptr != NULL)
-+                && compat_ptr2id_array[comp].node_type == node_type)) {
-+        _fm_cpt_dbg(COMPAT_GENERIC, "%p\n", compat_ptr2id_array[comp].ptr);
-+        return compat_ptr2id_array[comp].ptr;
-+    }
-+    return NULL;
-+}
-+EXPORT_SYMBOL(compat_get_id2ptr);
-+/* } maping kernel pointers w/ UserSpace id's  */
-+
-+void compat_obj_delete(
-+	ioc_compat_fm_obj_t *compat_id,
-+	ioc_fm_obj_t *id)
-+{
-+	id->obj = compat_pcd_id2ptr(compat_id->obj);
-+	compat_del_ptr2id(id->obj, FM_MAP_TYPE_PCD_NODE);
-+}
-+
-+static inline void compat_copy_fm_pcd_plcr_next_engine(
-+        ioc_compat_fm_pcd_plcr_next_engine_params_u *compat_param,
-+        ioc_fm_pcd_plcr_next_engine_params_u        *param,
-+        ioc_fm_pcd_engine                           next_engine,
-+        uint8_t                                     compat)
-+{
-+    _fm_cpt_dbg (compat, " {->...\n");
-+
-+    switch (next_engine)
-+    {
-+        case e_IOC_FM_PCD_PLCR:
-+            if (compat == COMPAT_US_TO_K)
-+                param->p_profile = compat_pcd_id2ptr(compat_param->p_profile);
-+            else
-+                compat_param->p_profile = compat_pcd_ptr2id(param->p_profile);
-+        break;
-+        case e_IOC_FM_PCD_KG:
-+            if (compat == COMPAT_US_TO_K)
-+                param->p_direct_scheme = compat_pcd_id2ptr(compat_param->p_direct_scheme);
-+            else
-+                compat_param->p_direct_scheme = compat_pcd_ptr2id(param->p_direct_scheme);
-+        break;
-+        default:
-+            if (compat == COMPAT_US_TO_K)
-+                param->action = compat_param->action;
-+            else
-+                compat_param->action = param->action;
-+        break;
-+    }
-+
-+    _fm_cpt_dbg (compat, " ...->}\n");
-+}
-+
-+void compat_copy_fm_pcd_plcr_profile(
-+        ioc_compat_fm_pcd_plcr_profile_params_t *compat_param,
-+        ioc_fm_pcd_plcr_profile_params_t        *param,
-+        uint8_t                                 compat)
-+{
-+    _fm_cpt_dbg (compat, " {->...\n");
-+
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->modify = compat_param->modify;
-+
-+        /* profile_select */
-+        if (!compat_param->modify)
-+        {
-+            param->profile_select.new_params.profile_type =
-+                compat_param->profile_select.new_params.profile_type;
-+            param->profile_select.new_params.p_fm_port =
-+                compat_ptr(compat_param->profile_select.new_params.p_fm_port);
-+            param->profile_select.new_params.relative_profile_id =
-+                compat_param->profile_select.new_params.relative_profile_id;
-+        }
-+        else
-+            param->profile_select.p_profile =
-+                compat_pcd_id2ptr(compat_param->profile_select.p_profile);
-+
-+        param->alg_selection    = compat_param->alg_selection;
-+        param->color_mode       = compat_param->color_mode;
-+
-+        /* both parameters in the union has the same size, so memcpy works */
-+        memcpy(&param->color, &compat_param->color, sizeof(param->color));
-+
-+        memcpy(&param->non_passthrough_alg_param,
-+               &compat_param->non_passthrough_alg_param,
-+               sizeof(ioc_fm_pcd_plcr_non_passthrough_alg_param_t));
-+
-+        param->next_engine_on_green = compat_param->next_engine_on_green;
-+        param->next_engine_on_yellow = compat_param->next_engine_on_yellow;
-+        param->next_engine_on_red = compat_param->next_engine_on_red;
-+
-+        param->trap_profile_on_flow_A = compat_param->trap_profile_on_flow_A;
-+        param->trap_profile_on_flow_B = compat_param->trap_profile_on_flow_B;
-+        param->trap_profile_on_flow_C = compat_param->trap_profile_on_flow_C;
-+    }
-+    else
-+    {
-+        compat_param->modify = param->modify;
-+
-+        /* profile_select */
-+        if (!param->modify)
-+        {
-+            compat_param->profile_select.new_params.profile_type =
-+                param->profile_select.new_params.profile_type;
-+            compat_param->profile_select.new_params.p_fm_port =
-+                ptr_to_compat(param->profile_select.new_params.p_fm_port);
-+            compat_param->profile_select.new_params.relative_profile_id =
-+                param->profile_select.new_params.relative_profile_id;
-+        }
-+        else
-+            compat_param->profile_select.p_profile =
-+                compat_pcd_ptr2id(param->profile_select.p_profile);
-+
-+        compat_param->alg_selection = param->alg_selection;
-+        compat_param->color_mode    = param->color_mode;
-+
-+        /* both parameters in the union has the same size, so memcpy works */
-+        memcpy(&compat_param->color, &param->color, sizeof(compat_param->color));
-+
-+        memcpy(&compat_param->non_passthrough_alg_param,
-+               &param->non_passthrough_alg_param,
-+               sizeof(ioc_fm_pcd_plcr_non_passthrough_alg_param_t));
-+
-+        compat_param->next_engine_on_green = param->next_engine_on_green;
-+        compat_param->next_engine_on_yellow = param->next_engine_on_yellow;
-+        compat_param->next_engine_on_red = param->next_engine_on_red;
-+
-+        compat_param->trap_profile_on_flow_A = param->trap_profile_on_flow_A;
-+        compat_param->trap_profile_on_flow_B = param->trap_profile_on_flow_B;
-+        compat_param->trap_profile_on_flow_C = param->trap_profile_on_flow_C;
-+
-+        compat_param->id = compat_add_ptr2id(param->id, FM_MAP_TYPE_PCD_NODE);
-+    }
-+
-+    compat_copy_fm_pcd_plcr_next_engine(&compat_param->params_on_green,
-+            &param->params_on_green, param->next_engine_on_green, compat);
-+
-+    compat_copy_fm_pcd_plcr_next_engine(&compat_param->params_on_yellow,
-+            &param->params_on_yellow, param->next_engine_on_yellow, compat);
-+
-+    compat_copy_fm_pcd_plcr_next_engine(&compat_param->params_on_red,
-+            &param->params_on_red, param->next_engine_on_red, compat);
-+
-+    _fm_cpt_dbg (compat, " ...->}\n");
-+}
-+
-+static inline void compat_copy_fm_pcd_cc_next_kg(
-+        ioc_compat_fm_pcd_cc_next_kg_params_t   *compat_param,
-+        ioc_fm_pcd_cc_next_kg_params_t          *param,
-+        uint8_t                                 compat)
-+{
-+    _fm_cpt_dbg (compat, " {->...\n");
-+
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->new_fqid         = compat_param->new_fqid;
-+        param->override_fqid    = compat_param->override_fqid;
-+#if DPAA_VERSION >= 11
-+        param->new_relative_storage_profile_id = compat_param->new_relative_storage_profile_id;
-+#endif
-+        param->p_direct_scheme  = compat_pcd_id2ptr(compat_param->p_direct_scheme);
-+    }
-+    else
-+    {
-+        compat_param->new_fqid          = param->new_fqid;
-+        compat_param->override_fqid     = param->override_fqid;
-+#if DPAA_VERSION >= 11
-+        compat_param->new_relative_storage_profile_id = param->new_relative_storage_profile_id;
-+#endif
-+        compat_param->p_direct_scheme   = compat_pcd_ptr2id(param->p_direct_scheme);
-+    }
-+
-+    _fm_cpt_dbg (compat, " ...->}\n");
-+}
-+
-+static inline void compat_copy_fm_pcd_cc_next_cc(
-+        ioc_compat_fm_pcd_cc_next_cc_params_t   *compat_param,
-+        ioc_fm_pcd_cc_next_cc_params_t          *param,
-+        uint8_t                                 compat)
-+{
-+    _fm_cpt_dbg (compat, " {->...\n");
-+
-+    if (compat == COMPAT_US_TO_K)
-+        param->cc_node_id = compat_pcd_id2ptr(compat_param->cc_node_id);
-+    else
-+        compat_param->cc_node_id = compat_pcd_ptr2id(param->cc_node_id);
-+
-+    _fm_cpt_dbg (compat, " ...->}\n");
-+}
-+
-+static inline void compat_copy_fm_pcd_cc_next_engine(
-+        ioc_compat_fm_pcd_cc_next_engine_params_t   *compat_param,
-+        ioc_fm_pcd_cc_next_engine_params_t          *param,
-+        uint8_t                                     compat)
-+{
-+    _fm_cpt_dbg (compat, " {->...\n");
-+
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->next_engine = compat_param->next_engine;
-+        if (param->next_engine != e_IOC_FM_PCD_INVALID )
-+            _fm_cpt_dbg(compat, " param->next_engine = %i \n", param->next_engine);
-+
-+        switch (param->next_engine)
-+        {
-+#if DPAA_VERSION >= 11
-+            case e_IOC_FM_PCD_FR:
-+                param->params.fr_params.frm_replic_id = compat_pcd_id2ptr(compat_param->params.fr_params.frm_replic_id);
-+                break;
-+#endif /* DPAA_VERSION >= 11 */
-+            case e_IOC_FM_PCD_CC:
-+                param->manip_id = compat_pcd_id2ptr(compat_param->manip_id);
-+                compat_copy_fm_pcd_cc_next_cc(&compat_param->params.cc_params, &param->params.cc_params, compat);
-+                break;
-+            case e_IOC_FM_PCD_KG:
-+                param->manip_id = compat_pcd_id2ptr(compat_param->manip_id);
-+                compat_copy_fm_pcd_cc_next_kg(&compat_param->params.kg_params, &param->params.kg_params, compat);
-+                break;
-+            case e_IOC_FM_PCD_DONE:
-+            case e_IOC_FM_PCD_PLCR:
-+                param->manip_id = compat_pcd_id2ptr(compat_param->manip_id);
-+            default:
-+                memcpy(&param->params, &compat_param->params, sizeof(param->params));
-+        }
-+        param->statistics_en = compat_param->statistics_en;
-+    }
-+    else
-+    {
-+        compat_param->next_engine = param->next_engine;
-+
-+        switch (compat_param->next_engine)
-+        {
-+#if DPAA_VERSION >= 11
-+            case e_IOC_FM_PCD_FR:
-+                compat_param->params.fr_params.frm_replic_id = compat_pcd_ptr2id(param->params.fr_params.frm_replic_id);
-+                break;
-+#endif /* DPAA_VERSION >= 11 */
-+            case e_IOC_FM_PCD_CC:
-+                compat_param->manip_id = compat_pcd_ptr2id(param->manip_id);
-+                compat_copy_fm_pcd_cc_next_cc(&compat_param->params.cc_params, &param->params.cc_params, compat);
-+                break;
-+            case e_IOC_FM_PCD_KG:
-+                compat_param->manip_id = compat_pcd_ptr2id(param->manip_id);
-+                compat_copy_fm_pcd_cc_next_kg(&compat_param->params.kg_params, &param->params.kg_params, compat);
-+                break;
-+            case e_IOC_FM_PCD_DONE:
-+            case e_IOC_FM_PCD_PLCR:
-+                compat_param->manip_id = compat_pcd_ptr2id(param->manip_id);
-+            default:
-+                memcpy(&compat_param->params, &param->params, sizeof(compat_param->params));
-+        }
-+        compat_param->statistics_en = param->statistics_en;
-+    }
-+
-+    _fm_cpt_dbg (compat, " ...->}\n");
-+}
-+
-+void compat_copy_fm_pcd_cc_key(
-+        ioc_compat_fm_pcd_cc_key_params_t   *compat_param,
-+        ioc_fm_pcd_cc_key_params_t          *param,
-+        uint8_t                             compat)
-+{
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->p_key = compat_ptr(compat_param->p_key);
-+        param->p_mask = compat_ptr(compat_param->p_mask);
-+    }
-+    else
-+    {
-+        compat_param->p_key = ptr_to_compat(param->p_key);
-+        compat_param->p_mask = ptr_to_compat(param->p_mask);
-+    }
-+
-+    compat_copy_fm_pcd_cc_next_engine(
-+            &compat_param->cc_next_engine_params,
-+            &param->cc_next_engine_params,
-+            compat);
-+}
-+
-+void compat_copy_fm_pcd_cc_node_modify_key_and_next_engine(
-+        ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t   *compat_param,
-+        ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t          *param,
-+        uint8_t                                                         compat)
-+{
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->id       = compat_pcd_id2ptr(compat_param->id);
-+        param->key_indx = compat_param->key_indx;
-+        param->key_size = compat_param->key_size;
-+        compat_copy_fm_pcd_cc_key(
-+            &compat_param->key_params,
-+            &param->key_params,
-+            compat);
-+    }
-+    else
-+    {
-+        compat_param->id       = compat_pcd_ptr2id(param->id);
-+        compat_param->key_indx = param->key_indx;
-+        compat_param->key_size = param->key_size;
-+        compat_copy_fm_pcd_cc_key(
-+            &compat_param->key_params,
-+            &param->key_params,
-+            compat);
-+    }
-+}
-+
-+void compat_copy_fm_pcd_cc_node_modify_next_engine(
-+        ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t   *compat_param,
-+        ioc_fm_pcd_cc_node_modify_next_engine_params_t          *param,
-+        uint8_t                                                 compat)
-+{
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->id       = compat_pcd_id2ptr(compat_param->id);
-+        param->key_indx = compat_param->key_indx;
-+        param->key_size = compat_param->key_size;
-+    }
-+    else
-+    {
-+        compat_param->id       = compat_pcd_ptr2id(param->id);
-+        compat_param->key_indx = param->key_indx;
-+        compat_param->key_size = param->key_size;
-+    }
-+
-+    compat_copy_fm_pcd_cc_next_engine(
-+            &compat_param->cc_next_engine_params,
-+            &param->cc_next_engine_params,
-+            compat);
-+}
-+
-+void compat_fm_pcd_cc_tree_modify_next_engine(
-+        ioc_compat_fm_pcd_cc_tree_modify_next_engine_params_t   *compat_param,
-+        ioc_fm_pcd_cc_tree_modify_next_engine_params_t          *param,
-+        uint8_t                                                 compat)
-+{
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->id       = compat_pcd_id2ptr(compat_param->id);
-+        param->grp_indx = compat_param->grp_indx;
-+        param->indx     = compat_param->indx;
-+    }
-+    else
-+    {
-+        compat_param->id       = compat_pcd_ptr2id(param->id);
-+        compat_param->grp_indx = param->grp_indx;
-+        compat_param->indx     = param->indx;
-+    }
-+
-+    compat_copy_fm_pcd_cc_next_engine(
-+            &compat_param->cc_next_engine_params,
-+            &param->cc_next_engine_params,
-+            compat);
-+}
-+
-+void compat_copy_fm_pcd_hash_table(
-+        ioc_compat_fm_pcd_hash_table_params_t *compat_param,
-+        ioc_fm_pcd_hash_table_params_t *param,
-+        uint8_t compat)
-+{
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->max_num_of_keys  = compat_param->max_num_of_keys;
-+        param->statistics_mode  = compat_param->statistics_mode;
-+        param->kg_hash_shift    = compat_param->kg_hash_shift;
-+        param->hash_res_mask    = compat_param->hash_res_mask;
-+        param->hash_shift       = compat_param->hash_shift;
-+        param->match_key_size   = compat_param->match_key_size;
-+        param->id               = compat_pcd_id2ptr(compat_param->id);
-+    }
-+    else
-+    {
-+        compat_param->max_num_of_keys  = param->max_num_of_keys;
-+        compat_param->statistics_mode  = param->statistics_mode;
-+        compat_param->kg_hash_shift    = param->kg_hash_shift;
-+        compat_param->hash_res_mask    = param->hash_res_mask;
-+        compat_param->hash_shift       = param->hash_shift;
-+        compat_param->match_key_size   = param->match_key_size;
-+
-+        compat_param->id = compat_add_ptr2id(param->id, FM_MAP_TYPE_PCD_NODE);
-+    }
-+
-+    compat_copy_fm_pcd_cc_next_engine(
-+            &compat_param->cc_next_engine_params_for_miss,
-+            &param->cc_next_engine_params_for_miss,
-+            compat);
-+}
-+
-+void compat_copy_fm_pcd_cc_grp(
-+        ioc_compat_fm_pcd_cc_grp_params_t *compat_param,
-+        ioc_fm_pcd_cc_grp_params_t *param,
-+        uint8_t compat)
-+{
-+    int k;
-+
-+    _fm_cpt_dbg (compat, " {->...\n");
-+
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->num_of_distinction_units = compat_param->num_of_distinction_units;
-+        memcpy(param->unit_ids, compat_param->unit_ids, IOC_FM_PCD_MAX_NUM_OF_CC_UNITS);
-+    }
-+    else
-+    {
-+        compat_param->num_of_distinction_units = param->num_of_distinction_units;
-+        memcpy(compat_param->unit_ids, param->unit_ids, IOC_FM_PCD_MAX_NUM_OF_CC_UNITS);
-+    }
-+
-+    for (k=0; k < IOC_FM_PCD_MAX_NUM_OF_CC_ENTRIES_IN_GRP; k++)
-+        compat_copy_fm_pcd_cc_next_engine(
-+                &compat_param->next_engine_per_entries_in_grp[k],
-+                &param->next_engine_per_entries_in_grp[k],
-+                compat);
-+
-+    _fm_cpt_dbg (compat, " ...->}\n");
-+}
-+
-+void compat_copy_fm_pcd_cc_tree(
-+        ioc_compat_fm_pcd_cc_tree_params_t *compat_param,
-+        ioc_fm_pcd_cc_tree_params_t *param,
-+        uint8_t compat)
-+{
-+    int k;
-+    _fm_cpt_dbg (compat, " {->...\n");
-+
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->net_env_id = compat_pcd_id2ptr(compat_param->net_env_id);
-+        param->num_of_groups = compat_param->num_of_groups;
-+    }
-+    else
-+    {
-+        compat_param->net_env_id = compat_pcd_ptr2id(param->net_env_id);
-+        compat_param->num_of_groups = param->num_of_groups;
-+
-+        compat_param->id = compat_add_ptr2id(param->id, FM_MAP_TYPE_PCD_NODE);
-+    }
-+
-+    for (k=0; k < IOC_FM_PCD_MAX_NUM_OF_CC_GROUPS; k++)
-+        compat_copy_fm_pcd_cc_grp(
-+                &compat_param->fm_pcd_cc_group_params[k],
-+                &param->fm_pcd_cc_group_params[k],
-+                compat);
-+
-+    _fm_cpt_dbg (compat, " ...->}\n");
-+}
-+
-+void compat_fm_pcd_prs_sw(
-+        ioc_compat_fm_pcd_prs_sw_params_t *compat_param,
-+        ioc_fm_pcd_prs_sw_params_t *param,
-+        uint8_t compat)
-+{
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->override = compat_param->override;
-+        param->size = compat_param->size;
-+        param->base = compat_param->base;
-+        param->p_code = compat_ptr(compat_param->p_code);
-+        memcpy(param->sw_prs_data_params,compat_param->sw_prs_data_params,IOC_FM_PCD_PRS_NUM_OF_HDRS*sizeof(uint32_t));
-+        param->num_of_labels = compat_param->num_of_labels;
-+        memcpy(param->labels_table,compat_param->labels_table,IOC_FM_PCD_PRS_NUM_OF_LABELS*sizeof(ioc_fm_pcd_prs_label_params_t));
-+    }
-+}
-+
-+void compat_copy_fm_pcd_kg_scheme(
-+        ioc_compat_fm_pcd_kg_scheme_params_t    *compat_param,
-+        ioc_fm_pcd_kg_scheme_params_t           *param,
-+        uint8_t                                 compat)
-+{
-+    _fm_cpt_dbg(compat," {->...\n");
-+
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->modify = compat_param->modify;
-+
-+        /* scm_id */
-+        if (compat_param->modify)
-+        {
-+            param->scm_id.scheme_id = compat_pcd_id2ptr(compat_param->scm_id.scheme_id);
-+            _fm_cpt_dbg(compat," param->scm_id.scheme_id = %p \n", param->scm_id.scheme_id);
-+        }
-+        else
-+            param->scm_id.relative_scheme_id = compat_param->scm_id.relative_scheme_id;
-+
-+        param->always_direct = compat_param->always_direct;
-+        /* net_env_params */
-+        param->net_env_params.net_env_id = compat_pcd_id2ptr(compat_param->net_env_params.net_env_id);
-+        param->net_env_params.num_of_distinction_units = compat_param->net_env_params.num_of_distinction_units;
-+        memcpy(param->net_env_params.unit_ids,
-+                compat_param->net_env_params.unit_ids,
-+                IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS);
-+
-+        param->use_hash = compat_param->use_hash;
-+        memcpy(&param->key_extract_and_hash_params,
-+               &compat_param->key_extract_and_hash_params,
-+               sizeof(ioc_fm_pcd_kg_key_extract_and_hash_params_t));
-+        param->bypass_fqid_generation = compat_param->bypass_fqid_generation;
-+        param->base_fqid = compat_param->base_fqid;
-+#if DPAA_VERSION >= 11
-+        param->override_storage_profile =
-+                                 compat_param->override_storage_profile;
-+        param->storage_profile = compat_param->storage_profile;
-+#endif
-+        param->num_of_used_extracted_ors = compat_param->num_of_used_extracted_ors;
-+        memcpy(param->extracted_ors,
-+               compat_param->extracted_ors,
-+               IOC_FM_PCD_KG_NUM_OF_GENERIC_REGS * sizeof(ioc_fm_pcd_kg_extracted_or_params_t));
-+        param->next_engine = compat_param->next_engine;
-+
-+        /* kg_next_engine_params */
-+        if (param->next_engine == e_IOC_FM_PCD_CC)
-+        {
-+            param->kg_next_engine_params.cc.tree_id   = compat_pcd_id2ptr(compat_param->kg_next_engine_params.cc.tree_id);
-+            param->kg_next_engine_params.cc.grp_id    = compat_param->kg_next_engine_params.cc.grp_id;
-+            param->kg_next_engine_params.cc.plcr_next = compat_param->kg_next_engine_params.cc.plcr_next;
-+            param->kg_next_engine_params.cc.bypass_plcr_profile_generation
-+                                                      = compat_param->kg_next_engine_params.cc.bypass_plcr_profile_generation;
-+            memcpy(&param->kg_next_engine_params.cc.plcr_profile,
-+                   &compat_param->kg_next_engine_params.cc.plcr_profile,
-+                   sizeof(ioc_fm_pcd_kg_plcr_profile_t));
-+        }
-+        else
-+            memcpy(&param->kg_next_engine_params,
-+                   &compat_param->kg_next_engine_params,
-+                   sizeof(param->kg_next_engine_params));
-+
-+        memcpy(&param->scheme_counter,
-+               &compat_param->scheme_counter,
-+               sizeof(ioc_fm_pcd_kg_scheme_counter_t));
-+    }
-+    else
-+    {
-+        compat_param->modify = param->modify;
-+
-+        /* scm_id */
-+        if (param->modify)
-+            compat_param->scm_id.scheme_id = compat_pcd_ptr2id(param->scm_id.scheme_id);
-+        else
-+            compat_param->scm_id.relative_scheme_id = param->scm_id.relative_scheme_id;
-+
-+        compat_param->always_direct = param->always_direct;
-+
-+        /* net_env_params */
-+        compat_param->net_env_params.net_env_id = compat_pcd_ptr2id(param->net_env_params.net_env_id);
-+        compat_param->net_env_params.num_of_distinction_units = param->net_env_params.num_of_distinction_units;
-+        memcpy(compat_param->net_env_params.unit_ids, param->net_env_params.unit_ids, IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS);
-+
-+        compat_param->use_hash = param->use_hash;
-+        memcpy(&compat_param->key_extract_and_hash_params, &param->key_extract_and_hash_params, sizeof(ioc_fm_pcd_kg_key_extract_and_hash_params_t));
-+        compat_param->bypass_fqid_generation = param->bypass_fqid_generation;
-+        compat_param->base_fqid = param->base_fqid;
-+#if DPAA_VERSION >= 11
-+        compat_param->override_storage_profile =
-+                                        param->override_storage_profile;
-+        compat_param->storage_profile =  param->storage_profile;
-+#endif
-+        compat_param->num_of_used_extracted_ors = param->num_of_used_extracted_ors;
-+        memcpy(compat_param->extracted_ors, param->extracted_ors, IOC_FM_PCD_KG_NUM_OF_GENERIC_REGS * sizeof(ioc_fm_pcd_kg_extracted_or_params_t));
-+        compat_param->next_engine = param->next_engine;
-+
-+        /* kg_next_engine_params */
-+        if (compat_param->next_engine == e_IOC_FM_PCD_CC)
-+        {
-+            compat_param->kg_next_engine_params.cc.tree_id   = compat_pcd_ptr2id(param->kg_next_engine_params.cc.tree_id);
-+            compat_param->kg_next_engine_params.cc.grp_id    = param->kg_next_engine_params.cc.grp_id;
-+            compat_param->kg_next_engine_params.cc.plcr_next = param->kg_next_engine_params.cc.plcr_next;
-+            compat_param->kg_next_engine_params.cc.bypass_plcr_profile_generation
-+                                                             = param->kg_next_engine_params.cc.bypass_plcr_profile_generation;
-+            memcpy(&compat_param->kg_next_engine_params.cc.plcr_profile,
-+                   &param->kg_next_engine_params.cc.plcr_profile,
-+                   sizeof(ioc_fm_pcd_kg_plcr_profile_t));
-+        }
-+        else
-+            memcpy(&param->kg_next_engine_params, &compat_param->kg_next_engine_params, sizeof(compat_param->kg_next_engine_params));
-+
-+        memcpy(&compat_param->scheme_counter, &param->scheme_counter, sizeof(ioc_fm_pcd_kg_scheme_counter_t));
-+
-+        compat_param->id = compat_add_ptr2id(param->id, FM_MAP_TYPE_PCD_NODE);
-+    }
-+
-+    _fm_cpt_dbg(compat," ...->}\n");
-+}
-+
-+void compat_copy_fm_pcd_kg_scheme_spc(
-+        ioc_compat_fm_pcd_kg_scheme_spc_t *compat_param,
-+        ioc_fm_pcd_kg_scheme_spc_t *param,
-+        uint8_t compat)
-+{
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->id = compat_pcd_id2ptr(compat_param->id);
-+        param->val = compat_param->val;
-+    } else {
-+        compat_param->id = compat_pcd_ptr2id(param->id);
-+        compat_param->val = param->val;
-+    }
-+}
-+
-+
-+void compat_copy_fm_pcd_kg_scheme_select(
-+        ioc_compat_fm_pcd_kg_scheme_select_t *compat_param,
-+        ioc_fm_pcd_kg_scheme_select_t *param,
-+        uint8_t compat)
-+{
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->direct = compat_param->direct;
-+        if (param->direct)
-+            param->scheme_id = compat_pcd_id2ptr(compat_param->scheme_id);
-+    }
-+}
-+
-+void compat_copy_fm_pcd_kg_schemes_params(
-+        ioc_compat_fm_pcd_port_schemes_params_t *compat_param,
-+        ioc_fm_pcd_port_schemes_params_t *param,
-+        uint8_t compat)
-+{
-+    int k;
-+
-+    if (compat == COMPAT_US_TO_K) {
-+        param->num_of_schemes = compat_param->num_of_schemes;
-+        for(k=0; k < compat_param->num_of_schemes; k++)
-+            param->scheme_ids[k] = compat_pcd_id2ptr(compat_param->scheme_ids[k]);
-+    }
-+}
-+
-+void compat_copy_fm_port_pcd_cc(
-+    ioc_compat_fm_port_pcd_cc_params_t *compat_cc_params ,
-+    ioc_fm_port_pcd_cc_params_t *p_cc_params,
-+    uint8_t compat)
-+{
-+    if (compat == COMPAT_US_TO_K){
-+        p_cc_params->cc_tree_id = compat_pcd_id2ptr(compat_cc_params->cc_tree_id);
-+    }
-+}
-+
-+void compat_copy_fm_port_pcd_kg(
-+        ioc_compat_fm_port_pcd_kg_params_t *compat_param,
-+        ioc_fm_port_pcd_kg_params_t *param,
-+        uint8_t compat)
-+{
-+    if (compat == COMPAT_US_TO_K){
-+        uint8_t k;
-+
-+        param->num_of_schemes = compat_param->num_of_schemes;
-+        for(k=0; k<compat_param->num_of_schemes; k++)
-+            param->scheme_ids[k] = compat_pcd_id2ptr(compat_param->scheme_ids[k]);
-+
-+        param->direct_scheme = compat_param->direct_scheme;
-+        if (param->direct_scheme)
-+            param->direct_scheme_id = compat_pcd_id2ptr(compat_param->direct_scheme_id);
-+    }
-+}
-+
-+void compat_copy_fm_port_pcd(
-+        ioc_compat_fm_port_pcd_params_t *compat_param,
-+        ioc_fm_port_pcd_params_t *param,
-+        uint8_t compat)
-+{
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        ioc_fm_port_pcd_prs_params_t         *same_port_pcd_prs_params;
-+        ioc_compat_fm_port_pcd_cc_params_t   *compat_port_pcd_cc_params;
-+        ioc_compat_fm_port_pcd_kg_params_t   *compat_port_pcd_kg_params;
-+        ioc_compat_fm_port_pcd_plcr_params_t *compat_port_pcd_plcr_params;
-+
-+        same_port_pcd_prs_params    = (ioc_fm_port_pcd_prs_params_t *) (compat_param + 1);
-+        compat_port_pcd_cc_params   = (ioc_compat_fm_port_pcd_cc_params_t *) (same_port_pcd_prs_params + 1);
-+        compat_port_pcd_kg_params   = (ioc_compat_fm_port_pcd_kg_params_t *) (compat_port_pcd_cc_params + 1);
-+        compat_port_pcd_plcr_params = (ioc_compat_fm_port_pcd_plcr_params_t *) (compat_port_pcd_kg_params + 1);
-+
-+        _fm_cpt_dbg(compat,"\n param->p_prs_params=%p \n", param->p_prs_params);
-+        _fm_cpt_dbg(compat," param->p_cc_params=%p  \n", param->p_cc_params);
-+        _fm_cpt_dbg(compat," param->p_kg_params=%p  \n", param->p_kg_params);
-+        _fm_cpt_dbg(compat," param->p_plcr_params=%p  \n", param->p_plcr_params);
-+        _fm_cpt_dbg(compat," param->p_ip_reassembly_manip=%p  \n", param->p_ip_reassembly_manip);
-+#if (DPAA_VERSION >= 11)
-+        _fm_cpt_dbg(compat," param->p_capwap_reassembly_manip=%p  \n", param->p_capwap_reassembly_manip);
-+#endif
-+        param->pcd_support = compat_param->pcd_support;
-+        param->net_env_id = compat_pcd_id2ptr(compat_param->net_env_id);
-+
-+        if (param->p_cc_params)
-+            compat_copy_fm_port_pcd_cc(compat_port_pcd_cc_params, param->p_cc_params, COMPAT_US_TO_K);
-+        if (param->p_kg_params)
-+            compat_copy_fm_port_pcd_kg(compat_port_pcd_kg_params, param->p_kg_params, COMPAT_US_TO_K);
-+        if (param->p_plcr_params)
-+            param->p_plcr_params->plcr_profile_id = compat_pcd_id2ptr(compat_port_pcd_plcr_params->plcr_profile_id);
-+        param->p_ip_reassembly_manip = compat_pcd_id2ptr(compat_param->p_ip_reassembly_manip);
-+#if (DPAA_VERSION >= 11)
-+        param->p_capwap_reassembly_manip = compat_pcd_id2ptr(compat_param->p_capwap_reassembly_manip);
-+#endif
-+    }
-+}
-+
-+void compat_copy_fm_port_pcd_modify_tree(
-+        ioc_compat_fm_obj_t *compat_id,
-+        ioc_fm_obj_t *id,
-+        uint8_t compat)
-+{
-+    if (compat == COMPAT_US_TO_K)
-+        id->obj = compat_pcd_id2ptr(compat_id->obj);
-+}
-+
-+#if (DPAA_VERSION >= 11)
-+void compat_copy_fm_port_vsp_alloc_params(
-+        ioc_compat_fm_port_vsp_alloc_params_t *compat_param,
-+        ioc_fm_port_vsp_alloc_params_t *param,
-+        uint8_t compat)
-+{
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        _fm_cpt_dbg(compat," param->p_fm_tx_port=%p  \n", param->p_fm_tx_port);
-+
-+        param->dflt_relative_id = compat_param->dflt_relative_id;
-+        param->num_of_profiles = compat_param->num_of_profiles;
-+        param->p_fm_tx_port = compat_pcd_id2ptr(compat_param->p_fm_tx_port);
-+    }
-+}
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+void compat_copy_fm_pcd_cc_tbl_get_stats(
-+        ioc_compat_fm_pcd_cc_tbl_get_stats_t *compat_param,
-+        ioc_fm_pcd_cc_tbl_get_stats_t *param,
-+        uint8_t compat)
-+{
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->id = compat_pcd_id2ptr(compat_param->id);
-+	param->key_index = compat_param->key_index;
-+        memcpy(&param->statistics, &compat_param->statistics, sizeof(ioc_fm_pcd_cc_key_statistics_t));
-+    } else {
-+        compat_param->id = compat_add_ptr2id(param->id, FM_MAP_TYPE_PCD_NODE);
-+	compat_param->key_index = param->key_index;
-+        memcpy(&compat_param->statistics, &param->statistics, sizeof(ioc_fm_pcd_cc_key_statistics_t));
-+    }
-+}
-+
-+  
-+void compat_copy_fm_pcd_net_env(
-+        ioc_compat_fm_pcd_net_env_params_t *compat_param,
-+        ioc_fm_pcd_net_env_params_t *param,
-+        uint8_t compat)
-+{
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->num_of_distinction_units = compat_param->num_of_distinction_units;
-+        memcpy(param->units, compat_param->units, sizeof(ioc_fm_pcd_distinction_unit_t)*IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS);
-+        param->id = NULL; /* to avoid passing garbage to the kernel */
-+    }
-+    else
-+    {
-+        compat_param->num_of_distinction_units = param->num_of_distinction_units;
-+        memcpy(compat_param->units, param->units, sizeof(ioc_fm_pcd_distinction_unit_t)*IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS);
-+
-+        compat_param->id = compat_add_ptr2id(param->id, FM_MAP_TYPE_PCD_NODE);
-+    }
-+}
-+
-+void compat_copy_fm_pcd_cc_node_modify_key(
-+        ioc_compat_fm_pcd_cc_node_modify_key_params_t   *compat_param,
-+        ioc_fm_pcd_cc_node_modify_key_params_t          *param,
-+        uint8_t                                         compat)
-+{
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->key_indx = compat_param->key_indx;
-+        param->key_size = compat_param->key_size;
-+        param->p_key    = (uint8_t *)compat_ptr(compat_param->p_key);
-+        _fm_cpt_dbg(compat," param->p_key = %p \n", param->p_key);
-+        param->p_mask   = (uint8_t *)compat_ptr(compat_param->p_mask);
-+        _fm_cpt_dbg(compat," param->p_mask = %p\n", param->p_mask);
-+        param->id       = compat_pcd_id2ptr(compat_param->id);
-+        _fm_cpt_dbg(compat," param->id = %p \n", param->id);
-+    }
-+    else
-+    {
-+        compat_param->key_indx  = param->key_indx;
-+        compat_param->key_size  = param->key_size;
-+        compat_param->p_key     = ptr_to_compat((void *)param->p_key);
-+        compat_param->p_mask    = ptr_to_compat((void *)param->p_mask);
-+
-+        compat_param->id = compat_add_ptr2id(param->id, FM_MAP_TYPE_PCD_NODE);
-+    }
-+}
-+
-+void compat_copy_keys(
-+        ioc_compat_keys_params_t *compat_param,
-+        ioc_keys_params_t *param,
-+        uint8_t compat)
-+{
-+    int k = 0;
-+
-+    _fm_cpt_dbg(compat," {->...\n");
-+
-+    if (compat == COMPAT_US_TO_K) {
-+        param->max_num_of_keys = compat_param->max_num_of_keys;
-+        param->mask_support    = compat_param->mask_support;
-+        param->statistics_mode = compat_param->statistics_mode;
-+        param->num_of_keys     = compat_param->num_of_keys;
-+        param->key_size        = compat_param->key_size;
-+#if (DPAA_VERSION >= 11)
-+        memcpy(&param->frame_length_ranges,
-+                &compat_param->frame_length_ranges,
-+                sizeof(param->frame_length_ranges[0]) *
-+                    IOC_FM_PCD_CC_STATS_MAX_NUM_OF_FLR);
-+#endif /* (DPAA_VERSION >= 11) */
-+    }
-+    else {
-+        compat_param->max_num_of_keys = param->max_num_of_keys;
-+        compat_param->mask_support    = param->mask_support;
-+        compat_param->statistics_mode = param->statistics_mode;
-+        compat_param->num_of_keys     = param->num_of_keys;
-+        compat_param->key_size        = param->key_size;
-+#if (DPAA_VERSION >= 11)
-+        memcpy(&compat_param->frame_length_ranges,
-+            &param->frame_length_ranges,
-+            sizeof(compat_param->frame_length_ranges[0]) *
-+                IOC_FM_PCD_CC_STATS_MAX_NUM_OF_FLR);
-+#endif /* (DPAA_VERSION >= 11) */
-+    }
-+
-+    for (k=0; k < IOC_FM_PCD_MAX_NUM_OF_KEYS; k++)
-+        compat_copy_fm_pcd_cc_key(
-+            &compat_param->key_params[k],
-+            &param->key_params[k],
-+             compat);
-+
-+    compat_copy_fm_pcd_cc_next_engine(
-+            &compat_param->cc_next_engine_params_for_miss,
-+            &param->cc_next_engine_params_for_miss,
-+            compat);
-+
-+    _fm_cpt_dbg(compat," ...->}\n");
-+}
-+
-+void compat_copy_fm_pcd_cc_node(
-+        ioc_compat_fm_pcd_cc_node_params_t  *compat_param,
-+        ioc_fm_pcd_cc_node_params_t         *param,
-+        uint8_t                             compat)
-+{
-+    _fm_cpt_dbg(compat," {->...\n");
-+
-+    if (compat == COMPAT_US_TO_K)
-+        memcpy(&param->extract_cc_params, &compat_param->extract_cc_params, sizeof(ioc_fm_pcd_extract_entry_t));
-+
-+    else
-+    {
-+        compat_copy_keys(&compat_param->keys_params, &param->keys_params, compat);
-+
-+        compat_param->id = compat_add_ptr2id(param->id, FM_MAP_TYPE_PCD_NODE);
-+        _fm_cpt_dbg(compat," param->id = %p \n", param->id);
-+    }
-+
-+    compat_copy_keys(&compat_param->keys_params, &param->keys_params, compat);
-+
-+    _fm_cpt_dbg(compat," ...->}\n");
-+}
-+
-+void compat_fm_pcd_manip_set_node(
-+        ioc_compat_fm_pcd_manip_params_t *compat_param,
-+        ioc_fm_pcd_manip_params_t *param,
-+        uint8_t compat)
-+{
-+    if (compat == COMPAT_US_TO_K) {
-+        param->type = compat_param->type;
-+        switch (param->type) {
-+            case e_IOC_FM_PCD_MANIP_HDR:
-+                param->u.hdr.rmv = compat_param->u.hdr.rmv;
-+                memcpy(&param->u.hdr.rmv_params,
-+                        &compat_param->u.hdr.rmv_params,
-+                        sizeof(param->u.hdr.rmv_params));
-+
-+                param->u.hdr.insrt = compat_param->u.hdr.insrt;
-+                param->u.hdr.insrt_params.type =
-+                    compat_param->u.hdr.insrt_params.type;
-+                switch (compat_param->u.hdr.insrt_params.type)
-+                {
-+                    case e_IOC_FM_PCD_MANIP_INSRT_GENERIC:
-+                        param->u.hdr.insrt_params.u.generic.offset =
-+                            compat_param->u.hdr.insrt_params.u.generic.offset;
-+                        param->u.hdr.insrt_params.u.generic.size =
-+                            compat_param->u.hdr.insrt_params.u.generic.size;
-+                        param->u.hdr.insrt_params.u.generic.replace =
-+                            compat_param->u.hdr.insrt_params.u.generic.replace;
-+                        param->u.hdr.insrt_params.u.generic.p_data =
-+                            compat_ptr(compat_param->u.hdr.insrt_params.u.generic.p_data);
-+                        break;
-+                    case e_IOC_FM_PCD_MANIP_INSRT_BY_HDR:
-+                        param->u.hdr.insrt_params.u.by_hdr.type =
-+                            compat_param->u.hdr.insrt_params.u.by_hdr.type;
-+                        param->u.hdr.insrt_params.u.by_hdr.u.specific_l2_params.specific_l2 =
-+                            compat_param->u.hdr.insrt_params.u.by_hdr.u.specific_l2_params.specific_l2;
-+                        param->u.hdr.insrt_params.u.by_hdr.u.specific_l2_params.update =
-+                            compat_param->u.hdr.insrt_params.u.by_hdr.u.specific_l2_params.update;
-+                        param->u.hdr.insrt_params.u.by_hdr.u.specific_l2_params.size =
-+                            compat_param->u.hdr.insrt_params.u.by_hdr.u.specific_l2_params.size;
-+                        param->u.hdr.insrt_params.u.by_hdr.u.specific_l2_params.p_data =
-+                            compat_ptr(compat_param->u.hdr.insrt_params.u.by_hdr.u.specific_l2_params.p_data);
-+                        break;
-+                    default:
-+                        _fm_cpt_err("Unsupported type: %d", compat_param->u.hdr.insrt_params.type);
-+                }
-+
-+                param->u.hdr.field_update = compat_param->u.hdr.field_update;
-+                memcpy(&param->u.hdr.field_update_params,
-+                        &compat_param->u.hdr.field_update_params,
-+                        sizeof(param->u.hdr.field_update_params));
-+
-+                param->u.hdr.custom = compat_param->u.hdr.custom;
-+                memcpy(&param->u.hdr.custom_params,
-+                        &compat_param->u.hdr.custom_params,
-+                        sizeof(param->u.hdr.custom_params));
-+
-+                param->u.hdr.dont_parse_after_manip =
-+                    compat_param->u.hdr.dont_parse_after_manip;
-+                break;
-+            case e_IOC_FM_PCD_MANIP_REASSEM:
-+                memcpy(&param->u.reassem, &compat_param->u.reassem, sizeof(param->u.reassem));
-+                break;
-+            case e_IOC_FM_PCD_MANIP_FRAG:
-+                memcpy(&param->u.frag, &compat_param->u.frag, sizeof(param->u.frag));
-+                break;
-+            case e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD:
-+                memcpy(&param->u.special_offload,
-+                       &compat_param->u.special_offload,
-+                       sizeof(param->u.special_offload));
-+            break;
-+        }
-+
-+        param->p_next_manip = compat_pcd_id2ptr(compat_param->p_next_manip);
-+        param->id = compat_pcd_id2ptr(compat_param->id);
-+    }
-+    else {
-+        compat_param->type = param->type;
-+        memcpy(&compat_param->u, &param->u, sizeof(compat_param->u));
-+
-+        if (param->type == e_IOC_FM_PCD_MANIP_HDR &&
-+            param->u.hdr.insrt_params.type == e_IOC_FM_PCD_MANIP_INSRT_GENERIC)
-+                compat_param->u.hdr.insrt_params.u.generic.p_data =
-+                    ptr_to_compat(param->u.hdr.insrt_params.u.generic.p_data);
-+
-+        compat_param->p_next_manip = compat_pcd_ptr2id(param->id);
-+        /* ... should be one that was added previously by the very call to
-+           compat_add_ptr2id() below: */
-+        compat_param->id = compat_add_ptr2id(param->id, FM_MAP_TYPE_PCD_NODE);
-+    }
-+}
-+
-+void compat_copy_fm_pcd_manip_get_stats(
-+	ioc_compat_fm_pcd_manip_get_stats_t *compat_param,
-+	ioc_fm_pcd_manip_get_stats_t *param,
-+	uint8_t compat)
-+{
-+	_fm_cpt_dbg (compat, " {->...\n");
-+
-+	if (compat == COMPAT_US_TO_K)
-+	{
-+		param->id = compat_pcd_id2ptr(compat_param->id);
-+		memcpy(&param->stats, &compat_param->stats,
-+					sizeof(ioc_fm_pcd_manip_stats_t));
-+	}
-+	else
-+	{
-+		compat_param->id = compat_add_ptr2id(param->id,
-+                                FM_MAP_TYPE_PCD_NODE);
-+		memcpy(&compat_param->stats, &param->stats,
-+					sizeof(ioc_fm_pcd_manip_stats_t));
-+	}
-+
-+	_fm_cpt_dbg (compat, " ...->}\n");
-+}
-+
-+#if (DPAA_VERSION >= 11)
-+void compat_copy_fm_pcd_frm_replic_group_params(
-+	ioc_compat_fm_pcd_frm_replic_group_params_t *compat_param,
-+	ioc_fm_pcd_frm_replic_group_params_t *param,
-+	uint8_t compat)
-+{
-+	int k;
-+
-+	_fm_cpt_dbg (compat, " {->...\n");
-+
-+	if (compat == COMPAT_US_TO_K)
-+	{
-+		param->max_num_of_entries = compat_param->max_num_of_entries;
-+		param->num_of_entries = compat_param->num_of_entries;
-+		param->id = compat_pcd_id2ptr(compat_param->id);
-+	}
-+	else
-+	{
-+		compat_param->max_num_of_entries = param->max_num_of_entries;
-+		compat_param->num_of_entries = param->num_of_entries;
-+		compat_param->id = compat_add_ptr2id(param->id,
-+				FM_MAP_TYPE_PCD_NODE);
-+	}
-+
-+	for (k=0; k < IOC_FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES; k++)
-+		compat_copy_fm_pcd_cc_next_engine(
-+				&compat_param->next_engine_params[k],
-+				&param->next_engine_params[k],
-+				compat);
-+
-+	_fm_cpt_dbg (compat, " ...->}\n");
-+}
-+
-+void compat_copy_fm_pcd_frm_replic_member(
-+	ioc_compat_fm_pcd_frm_replic_member_t *compat_param,
-+	ioc_fm_pcd_frm_replic_member_t *param,
-+	uint8_t compat)
-+{
-+	_fm_cpt_dbg (compat, " {->...\n");
-+
-+	if (compat == COMPAT_US_TO_K)
-+	{
-+		param->h_replic_group = compat_pcd_id2ptr(compat_param->h_replic_group);
-+		param->member_index = compat_param->member_index;
-+	}
-+
-+	_fm_cpt_dbg (compat, " ...->}\n");
-+}
-+
-+void compat_copy_fm_pcd_frm_replic_member_params(
-+	ioc_compat_fm_pcd_frm_replic_member_params_t *compat_param,
-+	ioc_fm_pcd_frm_replic_member_params_t *param,
-+	uint8_t compat)
-+{
-+	_fm_cpt_dbg (compat, " {->...\n");
-+
-+	compat_copy_fm_pcd_frm_replic_member(&compat_param->member,
-+		&param->member, compat);
-+
-+	compat_copy_fm_pcd_cc_next_engine(&compat_param->next_engine_params,
-+		&param->next_engine_params, compat);
-+
-+	_fm_cpt_dbg (compat, " ...->}\n");
-+}
-+
-+void compat_copy_fm_vsp_params(
-+    ioc_compat_fm_vsp_params_t *compat_param,
-+    ioc_fm_vsp_params_t *param,
-+    uint8_t compat)
-+{
-+    _fm_cpt_dbg (compat, " {->...\n");
-+
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        memcpy(&param->ext_buf_pools, &compat_param->ext_buf_pools, sizeof(ioc_fm_ext_pools));
-+        param->liodn_offset = compat_param->liodn_offset;
-+        param->port_params.port_id = compat_param->port_params.port_id;
-+        param->port_params.port_type = compat_param->port_params.port_type;
-+        param->relative_profile_id = compat_param->relative_profile_id;
-+    }
-+    else
-+    {
-+        memcpy(&compat_param->ext_buf_pools, &param->ext_buf_pools, sizeof(ioc_fm_ext_pools));
-+        compat_param->liodn_offset = param->liodn_offset;
-+        compat_param->port_params.port_id = param->port_params.port_id;
-+        compat_param->port_params.port_type = param->port_params.port_type;
-+        compat_param->relative_profile_id = param->relative_profile_id;
-+        compat_param->id = compat_add_ptr2id(param->id, FM_MAP_TYPE_PCD_NODE);
-+    }
-+
-+    _fm_cpt_dbg (compat, " ...->}\n");
-+}
-+
-+void compat_copy_fm_buf_pool_depletion_params(
-+    ioc_compat_fm_buf_pool_depletion_params_t *compat_param,
-+    ioc_fm_buf_pool_depletion_params_t *param,
-+    uint8_t compat)
-+{
-+    _fm_cpt_dbg (compat, " {->...\n");
-+
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->p_fm_vsp = compat_pcd_id2ptr(compat_param->p_fm_vsp);
-+        memcpy(&param->fm_buf_pool_depletion,
-+                &compat_param->fm_buf_pool_depletion,
-+                sizeof(ioc_fm_buf_pool_depletion_t));
-+    }
-+
-+    _fm_cpt_dbg (compat, " ...->}\n");
-+}
-+
-+void compat_copy_fm_buffer_prefix_content_params(
-+    ioc_compat_fm_buffer_prefix_content_params_t *compat_param,
-+    ioc_fm_buffer_prefix_content_params_t *param,
-+    uint8_t compat)
-+{
-+    _fm_cpt_dbg (compat, " {->...\n");
-+
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->p_fm_vsp = compat_pcd_id2ptr(compat_param->p_fm_vsp);
-+        memcpy(&param->fm_buffer_prefix_content,
-+                &compat_param->fm_buffer_prefix_content,
-+                sizeof(ioc_fm_buffer_prefix_content_t));
-+    }
-+
-+    _fm_cpt_dbg (compat, " ...->}\n");
-+}
-+
-+void compat_copy_fm_vsp_config_no_sg_params(
-+    ioc_compat_fm_vsp_config_no_sg_params_t *compat_param,
-+    ioc_fm_vsp_config_no_sg_params_t *param,
-+    uint8_t compat)
-+{
-+    _fm_cpt_dbg (compat, " {->...\n");
-+
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->p_fm_vsp = compat_pcd_id2ptr(compat_param->p_fm_vsp);
-+        param->no_sg = compat_param->no_sg;
-+    }
-+
-+    _fm_cpt_dbg (compat, " ...->}\n");
-+}
-+
-+void compat_copy_fm_vsp_prs_result_params(
-+    ioc_compat_fm_vsp_prs_result_params_t *compat_param,
-+    ioc_fm_vsp_prs_result_params_t *param,
-+    uint8_t compat)
-+{
-+    _fm_cpt_dbg (compat, " {->...\n");
-+
-+    if (compat == COMPAT_US_TO_K)
-+    {
-+        param->p_fm_vsp = compat_pcd_id2ptr(compat_param->p_fm_vsp);
-+        /* p_data is an user-space pointer that needs to remain unmodified */
-+        param->p_data = (void *)(unsigned long long)compat_param->p_data;
-+    }
-+    else
-+    {
-+        compat_param->p_fm_vsp = compat_pcd_ptr2id(param->p_fm_vsp);
-+        /* p_data is an user-space pointer that needs to remain unmodified */
-+        compat_param->p_data = (compat_uptr_t)((unsigned long long)param->p_data & 0xFFFFFFFF);
-+    }
-+
-+    _fm_cpt_dbg (compat, " ...->}\n");
-+}
-+#endif /* (DPAA_VERSION >= 11) */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.h
-@@ -0,0 +1,755 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/*
-+ @File          lnxwrp_ioctls_fm_compat.h
-+
-+ @Description   FM PCD compat structures definition.
-+
-+*/
-+
-+#ifndef __FM_COMPAT_IOCTLS_H
-+#define __FM_COMPAT_IOCTLS_H
-+
-+#include <linux/compat.h>
-+
-+#define COMPAT_K_TO_US 0 /* copy from Kernel to User */
-+#define COMPAT_US_TO_K 1 /* copy from User to Kernel */
-+#define COMPAT_GENERIC 2
-+
-+#define COMPAT_COPY_K2US(dest, src, type)	compat_copy_##type(src, dest, 0)
-+#define COMPAT_COPY_US2K(dest, src, type)	compat_copy_##type(dest, src, 1)
-+
-+/* mapping kernel pointers w/ UserSpace id's { */
-+/* Because compat_ptr(ptr_to_compat(X)) != X, this way we cannot exchange pointers
-+   back and forth (US - KS). compat_ptr is a cast and pointers are broken. */
-+#define COMPAT_PTR2ID_ARRAY_MAX (512+1) /* first location is not used */
-+#define COMPAT_PTR2ID_WATERMARK 0xface0000
-+#define COMPAT_PTR2ID_WM_MASK   0xffff0000
-+
-+/* define it for debug trace */
-+/*#define FM_COMPAT_DBG*/
-+
-+#define _fm_cpt_prk(stage, format, arg...)	\
-+	printk(stage "fm_cpt (cpu:%u): " format, raw_smp_processor_id(), ##arg)
-+
-+#define _fm_cpt_inf(format, arg...) _fm_cpt_prk(KERN_INFO, format, ##arg)
-+#define _fm_cpt_wrn(format, arg...) _fm_cpt_prk(KERN_WARNING, format, ##arg)
-+#define _fm_cpt_err(format, arg...) _fm_cpt_prk(KERN_ERR, format, ##arg)
-+
-+/* used for compat IOCTL debugging */
-+#if defined(FM_COMPAT_DBG)
-+	#define _fm_cpt_dbg(from, format, arg...) \
-+		do{ \
-+			if (from == COMPAT_US_TO_K) \
-+				printk("fm_cpt to KS [%s:%u](cpu:%u) - " format,	\
-+					__func__, __LINE__, raw_smp_processor_id(), ##arg); \
-+			else if (from == COMPAT_K_TO_US) \
-+				printk("fm_cpt to US [%s:%u](cpu:%u) - " format,	\
-+					__func__, __LINE__, raw_smp_processor_id(), ##arg); \
-+            else \
-+                printk("fm_cpt [%s:%u](cpu:%u) - " format,    \
-+                    __func__, __LINE__, raw_smp_processor_id(), ##arg); \
-+		}while(0)
-+#else
-+#	define _fm_cpt_dbg(arg...)
-+#endif
-+
-+/*TODO: per FMan module:
-+ *
-+ *      Parser:  FM_MAP_TYPE_PARSER_NODE,
-+ *      Kg:      FM_MAP_TYPE_KG_NODE,
-+ *      Policer: FM_MAP_TYPE_POLICER_NODE
-+ *      Manip:   FM_MAP_TYPE_MANIP_NODE
-+ **/
-+enum fm_map_node_type {
-+    FM_MAP_TYPE_UNSPEC = 0,
-+    FM_MAP_TYPE_PCD_NODE,
-+
-+    /* add types here, update the policy */
-+
-+    __FM_MAP_TYPE_AFTER_LAST,
-+    FM_MAP_TYPE_MAX = __FM_MAP_TYPE_AFTER_LAST - 1
-+};
-+
-+void compat_del_ptr2id(void *p, enum fm_map_node_type);
-+compat_uptr_t compat_add_ptr2id(void *p, enum fm_map_node_type);
-+compat_uptr_t compat_get_ptr2id(void *p, enum fm_map_node_type);
-+void *compat_get_id2ptr(compat_uptr_t comp, enum fm_map_node_type);
-+
-+static inline compat_uptr_t compat_pcd_ptr2id(void *ptr) {
-+    return (ptr)? compat_get_ptr2id(ptr, FM_MAP_TYPE_PCD_NODE)
-+                : (compat_uptr_t) 0;
-+}
-+
-+static inline void *compat_pcd_id2ptr(compat_uptr_t id) {
-+    return (id) ? compat_get_id2ptr(id, FM_MAP_TYPE_PCD_NODE)
-+                : NULL;
-+}
-+
-+/* other similar inlines may be added as new nodes are added
-+   to enum fm_map_node_type above... */
-+/* } mapping kernel pointers w/ UserSpace id's  */
-+
-+/* pcd compat structures { */
-+typedef struct ioc_compat_fm_pcd_cc_node_remove_key_params_t {
-+    compat_uptr_t                       id;
-+    uint16_t                            key_indx;
-+} ioc_compat_fm_pcd_cc_node_remove_key_params_t;
-+
-+typedef union ioc_compat_fm_pcd_plcr_next_engine_params_u {
-+        ioc_fm_pcd_done_action     action;
-+        compat_uptr_t              p_profile;
-+        compat_uptr_t              p_direct_scheme;
-+} ioc_compat_fm_pcd_plcr_next_engine_params_u;
-+
-+typedef struct ioc_compat_fm_pcd_plcr_profile_params_t {
-+    bool                                        modify;
-+    union {
-+        struct {
-+            ioc_fm_pcd_profile_type_selection   profile_type;
-+            compat_uptr_t                       p_fm_port;
-+            uint16_t                            relative_profile_id;
-+        } new_params;
-+        compat_uptr_t                           p_profile;
-+    } profile_select;
-+    ioc_fm_pcd_plcr_algorithm_selection         alg_selection;
-+    ioc_fm_pcd_plcr_color_mode                  color_mode;
-+
-+    union {
-+        ioc_fm_pcd_plcr_color                   dflt_color;
-+        ioc_fm_pcd_plcr_color                   override;
-+    } color;
-+
-+    ioc_fm_pcd_plcr_non_passthrough_alg_param_t non_passthrough_alg_param;
-+
-+    ioc_fm_pcd_engine                           next_engine_on_green;
-+    ioc_compat_fm_pcd_plcr_next_engine_params_u params_on_green;
-+
-+    ioc_fm_pcd_engine                           next_engine_on_yellow;
-+    ioc_compat_fm_pcd_plcr_next_engine_params_u params_on_yellow;
-+
-+    ioc_fm_pcd_engine                           next_engine_on_red;
-+    ioc_compat_fm_pcd_plcr_next_engine_params_u params_on_red;
-+
-+    bool                                        trap_profile_on_flow_A;
-+    bool                                        trap_profile_on_flow_B;
-+    bool                                        trap_profile_on_flow_C;
-+    compat_uptr_t                               id;
-+} ioc_compat_fm_pcd_plcr_profile_params_t;
-+
-+typedef struct ioc_compat_fm_obj_t {
-+    compat_uptr_t obj;
-+} ioc_compat_fm_obj_t;
-+
-+typedef struct ioc_compat_fm_pcd_kg_scheme_select_t {
-+    bool          direct;
-+    compat_uptr_t scheme_id;
-+} ioc_compat_fm_pcd_kg_scheme_select_t;
-+
-+typedef struct ioc_compat_fm_pcd_port_schemes_params_t {
-+    uint8_t        num_of_schemes;
-+    compat_uptr_t  scheme_ids[FM_PCD_KG_NUM_OF_SCHEMES];
-+} ioc_compat_fm_pcd_port_schemes_params_t;
-+
-+#if (DPAA_VERSION >= 11)
-+typedef struct ioc_compat_fm_port_vsp_alloc_params_t {
-+    uint8_t       num_of_profiles;          /**< Number of Virtual Storage Profiles */
-+    uint8_t   	  dflt_relative_id;         /**< The default Virtual-Storage-Profile-id dedicated to Rx/OP port
-+                                             The same default Virtual-Storage-Profile-id will be for coupled Tx port
-+                                             if relevant function called for Rx port */
-+    compat_uptr_t p_fm_tx_port;             /**< Handle to coupled Tx Port; not relevant for OP port. */
-+}ioc_compat_fm_port_vsp_alloc_params_t;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+typedef struct ioc_compat_fm_pcd_net_env_params_t {
-+    uint8_t                         num_of_distinction_units;
-+    ioc_fm_pcd_distinction_unit_t   units[IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS]; /* same structure*/
-+    compat_uptr_t                   id;
-+} ioc_compat_fm_pcd_net_env_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_prs_sw_params_t {
-+    bool                            override;
-+    uint32_t                        size;
-+    uint16_t                        base;
-+    compat_uptr_t                   p_code;
-+    uint32_t                        sw_prs_data_params[IOC_FM_PCD_PRS_NUM_OF_HDRS];
-+    uint8_t                         num_of_labels;
-+    ioc_fm_pcd_prs_label_params_t   labels_table[IOC_FM_PCD_PRS_NUM_OF_LABELS];
-+} ioc_compat_fm_pcd_prs_sw_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_cc_next_kg_params_t {
-+    bool          override_fqid;
-+    uint32_t      new_fqid;
-+#if DPAA_VERSION >= 11
-+    uint8_t       new_relative_storage_profile_id;
-+#endif
-+    compat_uptr_t p_direct_scheme;
-+} ioc_compat_fm_pcd_cc_next_kg_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_cc_next_cc_params_t {
-+    compat_uptr_t       cc_node_id;
-+} ioc_compat_fm_pcd_cc_next_cc_params_t;
-+
-+#if DPAA_VERSION >= 11
-+typedef struct ioc_compat_fm_pcd_cc_next_fr_params_t {
-+    compat_uptr_t       frm_replic_id;
-+} ioc_compat_fm_pcd_cc_next_fr_params_t;
-+#endif /* DPAA_VERSION >= 11 */
-+
-+typedef struct ioc_compat_fm_pcd_cc_next_engine_params_t {
-+    ioc_fm_pcd_engine                          next_engine;
-+    union {
-+        ioc_compat_fm_pcd_cc_next_cc_params_t  cc_params;      /**< compat structure*/
-+        ioc_fm_pcd_cc_next_plcr_params_t       plcr_params;    /**< same structure*/
-+        ioc_fm_pcd_cc_next_enqueue_params_t    enqueue_params; /**< same structure*/
-+        ioc_compat_fm_pcd_cc_next_kg_params_t  kg_params;      /**< compat structure*/
-+#if DPAA_VERSION >= 11
-+        ioc_compat_fm_pcd_cc_next_fr_params_t  fr_params;      /**< compat structure*/
-+#endif /* DPAA_VERSION >= 11 */
-+    } params;
-+    compat_uptr_t                               manip_id;
-+    bool                                        statistics_en;
-+} ioc_compat_fm_pcd_cc_next_engine_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_cc_grp_params_t {
-+    uint8_t                             num_of_distinction_units;
-+    uint8_t                             unit_ids [IOC_FM_PCD_MAX_NUM_OF_CC_UNITS];
-+    ioc_compat_fm_pcd_cc_next_engine_params_t  next_engine_per_entries_in_grp[IOC_FM_PCD_MAX_NUM_OF_CC_ENTRIES_IN_GRP];
-+} ioc_compat_fm_pcd_cc_grp_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_cc_tree_params_t {
-+    compat_uptr_t                   net_env_id;
-+    uint8_t                         num_of_groups;
-+    ioc_compat_fm_pcd_cc_grp_params_t      fm_pcd_cc_group_params [IOC_FM_PCD_MAX_NUM_OF_CC_GROUPS];
-+    compat_uptr_t                   id;
-+} ioc_compat_fm_pcd_cc_tree_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_cc_tree_modify_next_engine_params_t {
-+    compat_uptr_t                       id;
-+    uint8_t                             grp_indx;
-+    uint8_t                             indx;
-+    ioc_compat_fm_pcd_cc_next_engine_params_t  cc_next_engine_params;
-+} ioc_compat_fm_pcd_cc_tree_modify_next_engine_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_cc_key_params_t {
-+    compat_uptr_t                              p_key;
-+    compat_uptr_t                              p_mask;
-+    ioc_compat_fm_pcd_cc_next_engine_params_t  cc_next_engine_params; /**< compat structure*/
-+} ioc_compat_fm_pcd_cc_key_params_t;
-+
-+typedef struct ioc_compat_keys_params_t {
-+    uint16_t                                   max_num_of_keys;
-+    bool                                       mask_support;
-+    ioc_fm_pcd_cc_stats_mode                   statistics_mode;
-+#if (DPAA_VERSION >= 11)
-+    uint16_t                                   frame_length_ranges[IOC_FM_PCD_CC_STATS_MAX_NUM_OF_FLR];
-+#endif /* (DPAA_VERSION >= 11) */
-+    uint16_t                                   num_of_keys;
-+    uint8_t                                    key_size;
-+    ioc_compat_fm_pcd_cc_key_params_t          key_params[IOC_FM_PCD_MAX_NUM_OF_KEYS]; /**< compat structure*/
-+    ioc_compat_fm_pcd_cc_next_engine_params_t  cc_next_engine_params_for_miss;         /**< compat structure*/
-+} ioc_compat_keys_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_cc_node_params_t {
-+    ioc_fm_pcd_extract_entry_t                 extract_cc_params;  /**< same structure*/
-+    ioc_compat_keys_params_t                   keys_params;        /**< compat structure*/
-+    compat_uptr_t                              id;
-+} ioc_compat_fm_pcd_cc_node_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a hash table
-+*//***************************************************************************/
-+typedef struct ioc_compat_fm_pcd_hash_table_params_t {
-+    uint16_t                    max_num_of_keys;
-+    ioc_fm_pcd_cc_stats_mode    statistics_mode;
-+    uint8_t                     kg_hash_shift;
-+    uint16_t                    hash_res_mask;
-+    uint8_t                     hash_shift;
-+    uint8_t                     match_key_size;
-+    ioc_compat_fm_pcd_cc_next_engine_params_t   cc_next_engine_params_for_miss;
-+    compat_uptr_t               id;
-+} ioc_compat_fm_pcd_hash_table_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_hash_table_add_key_params_t {
-+    compat_uptr_t                       p_hash_tbl;
-+    uint8_t                             key_size;
-+    ioc_compat_fm_pcd_cc_key_params_t   key_params;
-+} ioc_compat_fm_pcd_hash_table_add_key_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_cc_node_modify_key_params_t {
-+    compat_uptr_t                       id;
-+    uint16_t                            key_indx;
-+    uint8_t                             key_size;
-+    compat_uptr_t                       p_key;
-+    compat_uptr_t                       p_mask;
-+} ioc_compat_fm_pcd_cc_node_modify_key_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_hash_table_remove_key_params_t {
-+    compat_uptr_t   p_hash_tbl;
-+    uint8_t         key_size;
-+    compat_uptr_t   p_key;
-+} ioc_compat_fm_pcd_hash_table_remove_key_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t {
-+    compat_uptr_t                       id;
-+    uint16_t                            key_indx;
-+    uint8_t                             key_size;
-+    ioc_compat_fm_pcd_cc_key_params_t   key_params;
-+} ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t;
-+
-+typedef struct ioc_compat_fm_port_pcd_plcr_params_t {
-+    compat_uptr_t                plcr_profile_id;
-+} ioc_compat_fm_port_pcd_plcr_params_t;
-+
-+typedef struct ioc_compat_fm_port_pcd_cc_params_t {
-+    compat_uptr_t                cc_tree_id;
-+} ioc_compat_fm_port_pcd_cc_params_t;
-+
-+typedef struct ioc_compat_fm_port_pcd_kg_params_t {
-+    uint8_t             num_of_schemes;
-+    compat_uptr_t       scheme_ids[FM_PCD_KG_NUM_OF_SCHEMES];
-+    bool                direct_scheme;
-+    compat_uptr_t       direct_scheme_id;
-+} ioc_compat_fm_port_pcd_kg_params_t;
-+
-+typedef struct ioc_compat_fm_port_pcd_params_t {
-+    ioc_fm_port_pcd_support          pcd_support;
-+    compat_uptr_t                    net_env_id;
-+    compat_uptr_t                    p_prs_params;
-+    compat_uptr_t                    p_cc_params;
-+    compat_uptr_t                    p_kg_params;
-+    compat_uptr_t                    p_plcr_params;
-+    compat_uptr_t                    p_ip_reassembly_manip;
-+#if DPAA_VERSION >= 11
-+    compat_uptr_t                    p_capwap_reassembly_manip;
-+#endif
-+} ioc_compat_fm_port_pcd_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_kg_cc_t {
-+    compat_uptr_t                   tree_id;
-+    uint8_t                         grp_id;
-+    bool                            plcr_next;
-+    bool                            bypass_plcr_profile_generation;
-+    ioc_fm_pcd_kg_plcr_profile_t    plcr_profile;
-+} ioc_compat_fm_pcd_kg_cc_t;
-+
-+typedef struct ioc_compat_fm_pcd_kg_scheme_params_t {
-+    bool                                modify;
-+    union {
-+        uint8_t                         relative_scheme_id;
-+        compat_uptr_t                   scheme_id;
-+    } scm_id;
-+    bool                                always_direct;
-+    struct {
-+        compat_uptr_t                   net_env_id;
-+        uint8_t                         num_of_distinction_units;
-+        uint8_t                         unit_ids[IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS];
-+    } net_env_params;
-+    bool                                use_hash;
-+    ioc_fm_pcd_kg_key_extract_and_hash_params_t key_extract_and_hash_params;
-+    bool                                bypass_fqid_generation;
-+    uint32_t                            base_fqid;
-+    uint8_t                             num_of_used_extracted_ors;
-+    ioc_fm_pcd_kg_extracted_or_params_t extracted_ors[IOC_FM_PCD_KG_NUM_OF_GENERIC_REGS];
-+#if DPAA_VERSION >= 11
-+    bool                                override_storage_profile;
-+    ioc_fm_pcd_kg_storage_profile_t     storage_profile;
-+#endif /* DPAA_VERSION >= 11 */
-+    ioc_fm_pcd_engine                   next_engine;
-+    union{
-+        ioc_fm_pcd_done_action          done_action;
-+        ioc_fm_pcd_kg_plcr_profile_t    plcr_profile;
-+        ioc_compat_fm_pcd_kg_cc_t       cc;
-+    } kg_next_engine_params;
-+    ioc_fm_pcd_kg_scheme_counter_t      scheme_counter;
-+    compat_uptr_t                       id;
-+} ioc_compat_fm_pcd_kg_scheme_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t {
-+    compat_uptr_t                       id;
-+    uint16_t                            key_indx;
-+    uint8_t                             key_size;
-+    ioc_compat_fm_pcd_cc_next_engine_params_t  cc_next_engine_params;
-+} ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_manip_hdr_insrt_generic_params_t {
-+    uint8_t                         offset;
-+    uint8_t                         size;
-+    bool                            replace;
-+    compat_uptr_t                   p_data;
-+} ioc_compat_fm_pcd_manip_hdr_insrt_generic_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_manip_hdr_insrt_specific_l2_params_t {
-+    ioc_fm_pcd_manip_hdr_insrt_specific_l2  specific_l2;
-+    bool                                    update;
-+    uint8_t                                 size;
-+    compat_uptr_t                           p_data;
-+} ioc_compat_fm_pcd_manip_hdr_insrt_specific_l2_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_manip_hdr_insrt_t {
-+    uint8_t       size;          /**< size of inserted section */
-+    compat_uptr_t p_data;        /**< data to be inserted */
-+} ioc_compat_fm_pcd_manip_hdr_insrt_t;
-+
-+#if (DPAA_VERSION >= 11)
-+typedef struct ioc_compat_fm_pcd_manip_hdr_insrt_ip_params_t {
-+    bool    calc_l4_checksum; /**< Calculate L4 checksum. */
-+    ioc_fm_pcd_manip_hdr_qos_mapping_mode   mapping_mode; /**< TODO */
-+    uint8_t last_pid_offset;     /**< the offset of the last Protocol within
-+                                 the inserted header */
-+    uint16_t  id;           /**< 16 bit New IP ID */
-+    bool                            dont_frag_overwrite;
-+    /**< IPv4 only. DF is overwritten with the hash-result next-to-last byte.
-+     * This byte is configured to be overwritten when RPD is set. */
-+    uint8_t                         last_dst_offset;
-+    /**< IPv6 only. if routing extension exist, user should set the offset of the destination address
-+     * in order to calculate UDP checksum pseudo header;
-+     * Otherwise set it to '0'. */
-+    ioc_compat_fm_pcd_manip_hdr_insrt_t insrt; /**< size and data to be inserted. */
-+} ioc_compat_fm_pcd_manip_hdr_insrt_ip_params_t;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+typedef struct ioc_compat_fm_pcd_manip_hdr_insrt_by_hdr_params_t {
-+    ioc_fm_pcd_manip_hdr_insrt_by_hdr_type                      type;
-+    union {
-+       ioc_compat_fm_pcd_manip_hdr_insrt_specific_l2_params_t   specific_l2_params;
-+#if (DPAA_VERSION >= 11)
-+        ioc_compat_fm_pcd_manip_hdr_insrt_ip_params_t          ip_params;
-+        ioc_compat_fm_pcd_manip_hdr_insrt_t             insrt;
-+#endif /* (DPAA_VERSION >= 11) */
-+    } u;
-+} ioc_compat_fm_pcd_manip_hdr_insrt_by_hdr_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_manip_hdr_insrt_params_t {
-+    ioc_fm_pcd_manip_hdr_insrt_type                         type;
-+    union {
-+        ioc_compat_fm_pcd_manip_hdr_insrt_by_hdr_params_t   by_hdr;
-+        ioc_compat_fm_pcd_manip_hdr_insrt_generic_params_t  generic;
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+#error "FM_CAPWAP_SUPPORT feature not supported!"
-+        ioc_fm_pcd_manip_hdr_insrt_by_template_params_t     by_template;
-+#endif /* FM_CAPWAP_SUPPORT */
-+    } u;
-+} ioc_compat_fm_pcd_manip_hdr_insrt_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_manip_hdr_params_t {
-+    bool                                        rmv;
-+    ioc_fm_pcd_manip_hdr_rmv_params_t           rmv_params;
-+    bool                                        insrt;
-+    ioc_compat_fm_pcd_manip_hdr_insrt_params_t  insrt_params;
-+    bool                                        field_update;
-+    ioc_fm_pcd_manip_hdr_field_update_params_t  field_update_params;
-+    bool                                        custom;
-+    ioc_fm_pcd_manip_hdr_custom_params_t        custom_params;
-+    bool                                        dont_parse_after_manip;
-+} ioc_compat_fm_pcd_manip_hdr_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_manip_special_offload_params_t {
-+    bool    decryption;
-+    bool    ecn_copy;
-+    bool    dscp_copy;
-+    bool    variable_ip_hdr_len;
-+    bool    variable_ip_version;
-+    uint8_t outer_ip_hdr_len;
-+    uint16_t    arw_size;
-+    compat_uptr_t   arw_addr;
-+} ioc_compat_fm_pcd_manip_special_offload_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_manip_params_t {
-+    ioc_fm_pcd_manip_type                         type;
-+    union {
-+        ioc_compat_fm_pcd_manip_hdr_params_t      hdr;
-+        ioc_fm_pcd_manip_reassem_params_t         reassem;
-+        ioc_fm_pcd_manip_frag_params_t            frag;
-+        ioc_compat_fm_pcd_manip_special_offload_params_t special_offload;
-+    } u;
-+    compat_uptr_t                                 p_next_manip;
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+#error "FM_CAPWAP_SUPPORT feature not supported!"
-+    bool                                          frag_or_reasm;
-+    ioc_fm_pcd_manip_frag_or_reasm_params_t       frag_or_reasm_params;
-+#endif /* FM_CAPWAP_SUPPORT */
-+    compat_uptr_t                                 id;
-+} ioc_compat_fm_pcd_manip_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_manip_get_stats_t {
-+	compat_uptr_t			id;
-+	ioc_fm_pcd_manip_stats_t	stats;
-+} ioc_compat_fm_pcd_manip_get_stats_t;
-+
-+#if (DPAA_VERSION >= 11)
-+typedef struct ioc_compat_fm_pcd_frm_replic_group_params_t {
-+	uint8_t                     max_num_of_entries;
-+	uint8_t                     num_of_entries;
-+	ioc_compat_fm_pcd_cc_next_engine_params_t
-+		next_engine_params[IOC_FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES];
-+	compat_uptr_t               id;
-+} ioc_compat_fm_pcd_frm_replic_group_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_frm_replic_member_t {
-+    compat_uptr_t       h_replic_group;
-+    uint16_t            member_index;
-+} ioc_compat_fm_pcd_frm_replic_member_t;
-+
-+typedef struct ioc_compat_fm_pcd_frm_replic_member_params_t {
-+    ioc_compat_fm_pcd_frm_replic_member_t       member;
-+    ioc_compat_fm_pcd_cc_next_engine_params_t          next_engine_params;
-+} ioc_compat_fm_pcd_frm_replic_member_params_t;
-+
-+typedef struct ioc_compat_fm_vsp_params_t {
-+    compat_uptr_t       p_fm;                 /**< A handle to the FM object this VSP related to */
-+    ioc_fm_ext_pools    ext_buf_pools;        /**< Which external buffer pools are used
-+                                                   (up to FM_PORT_MAX_NUM_OF_EXT_POOLS), and their sizes.
-+                                                   parameter associated with Rx / OP port */
-+    uint16_t            liodn_offset;         /**< VSP's LIODN offset */
-+    struct {
-+        ioc_fm_port_type port_type;           /**< Port type */
-+        uint8_t          port_id;             /**< Port Id - relative to type */
-+    } port_params;
-+    uint8_t             relative_profile_id;  /**< VSP Id - relative to VSP's range
-+                                                   defined in relevant FM object */
-+    compat_uptr_t       id;                 /**< return value */
-+} ioc_compat_fm_vsp_params_t;
-+
-+typedef struct ioc_compat_fm_buf_pool_depletion_params_t {
-+    compat_uptr_t p_fm_vsp;
-+    ioc_fm_buf_pool_depletion_t fm_buf_pool_depletion;
-+} ioc_compat_fm_buf_pool_depletion_params_t;
-+
-+typedef struct ioc_compat_fm_buffer_prefix_content_params_t {
-+    compat_uptr_t p_fm_vsp;
-+    ioc_fm_buffer_prefix_content_t fm_buffer_prefix_content;
-+} ioc_compat_fm_buffer_prefix_content_params_t;
-+
-+typedef struct ioc_compat_fm_vsp_config_no_sg_params_t {
-+    compat_uptr_t p_fm_vsp;
-+    bool no_sg;
-+} ioc_compat_fm_vsp_config_no_sg_params_t;
-+
-+typedef struct ioc_compat_fm_vsp_prs_result_params_t {
-+    compat_uptr_t p_fm_vsp;
-+    compat_uptr_t p_data;
-+} ioc_compat_fm_vsp_prs_result_params_t;
-+
-+#endif /* (DPAA_VERSION >= 11) */
-+typedef struct ioc_compat_fm_pcd_kg_scheme_spc_t {
-+    uint32_t        val;
-+    compat_uptr_t   id;
-+} ioc_compat_fm_pcd_kg_scheme_spc_t;
-+
-+typedef struct ioc_compat_fm_ctrl_mon_counters_params_t {
-+    uint8_t     fm_ctrl_index;
-+    compat_uptr_t p_mon;
-+} ioc_compat_fm_ctrl_mon_counters_params_t;
-+
-+typedef struct ioc_compat_fm_pcd_cc_tbl_get_stats_t {
-+    compat_uptr_t                   id;
-+    uint16_t                        key_index;
-+    ioc_fm_pcd_cc_key_statistics_t  statistics;
-+} ioc_compat_fm_pcd_cc_tbl_get_stats_t;
-+
-+
-+/* } pcd compat structures */
-+
-+void compat_obj_delete(
-+        ioc_compat_fm_obj_t *compat_id,
-+        ioc_fm_obj_t *id);
-+
-+/* pcd compat functions { */
-+void compat_copy_fm_pcd_plcr_profile(
-+        ioc_compat_fm_pcd_plcr_profile_params_t *compat_param,
-+        ioc_fm_pcd_plcr_profile_params_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_fm_pcd_cc_key(
-+        ioc_compat_fm_pcd_cc_key_params_t *compat_param,
-+        ioc_fm_pcd_cc_key_params_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_fm_pcd_cc_node_modify_key_and_next_engine(
-+        ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t *compat_param,
-+        ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_fm_pcd_cc_node_modify_next_engine(
-+        ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t *compat_param,
-+        ioc_fm_pcd_cc_node_modify_next_engine_params_t *param,
-+        uint8_t compat);
-+
-+void compat_fm_pcd_cc_tree_modify_next_engine(
-+        ioc_compat_fm_pcd_cc_tree_modify_next_engine_params_t *compat_param,
-+        ioc_fm_pcd_cc_tree_modify_next_engine_params_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_fm_pcd_hash_table(
-+        ioc_compat_fm_pcd_hash_table_params_t *compat_param,
-+        ioc_fm_pcd_hash_table_params_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_fm_pcd_cc_grp(
-+        ioc_compat_fm_pcd_cc_grp_params_t *compat_param,
-+        ioc_fm_pcd_cc_grp_params_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_fm_pcd_cc_tree(
-+        ioc_compat_fm_pcd_cc_tree_params_t *compat_param,
-+        ioc_fm_pcd_cc_tree_params_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_fm_pcd_cc_tbl_get_stats(
-+        ioc_compat_fm_pcd_cc_tbl_get_stats_t *compat_param,
-+        ioc_fm_pcd_cc_tbl_get_stats_t *param,
-+        uint8_t compat);
-+
-+void compat_fm_pcd_prs_sw(
-+        ioc_compat_fm_pcd_prs_sw_params_t *compat_param,
-+        ioc_fm_pcd_prs_sw_params_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_fm_pcd_kg_scheme(
-+        ioc_compat_fm_pcd_kg_scheme_params_t *compat_param,
-+        ioc_fm_pcd_kg_scheme_params_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_fm_pcd_kg_scheme_select(
-+        ioc_compat_fm_pcd_kg_scheme_select_t *compat_param,
-+        ioc_fm_pcd_kg_scheme_select_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_fm_pcd_kg_schemes_params(
-+        ioc_compat_fm_pcd_port_schemes_params_t *compat_param,
-+        ioc_fm_pcd_port_schemes_params_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_fm_port_pcd_kg(
-+        ioc_compat_fm_port_pcd_kg_params_t *compat_param,
-+        ioc_fm_port_pcd_kg_params_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_fm_port_pcd(
-+        ioc_compat_fm_port_pcd_params_t *compat_param,
-+        ioc_fm_port_pcd_params_t *param,
-+        uint8_t compat);
-+
-+#if (DPAA_VERSION >= 11)
-+void compat_copy_fm_port_vsp_alloc_params(
-+        ioc_compat_fm_port_vsp_alloc_params_t *compat_param,
-+        ioc_fm_port_vsp_alloc_params_t *param,
-+        uint8_t compat);
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+void compat_copy_fm_pcd_net_env(
-+        ioc_compat_fm_pcd_net_env_params_t *compat_param,
-+        ioc_fm_pcd_net_env_params_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_fm_pcd_cc_node_modify_key(
-+        ioc_compat_fm_pcd_cc_node_modify_key_params_t *compat_param,
-+        ioc_fm_pcd_cc_node_modify_key_params_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_keys(
-+        ioc_compat_keys_params_t *compat_param,
-+        ioc_keys_params_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_fm_pcd_cc_node(
-+        ioc_compat_fm_pcd_cc_node_params_t *compat_param,
-+        ioc_fm_pcd_cc_node_params_t *param,
-+        uint8_t compat);
-+
-+void compat_fm_pcd_manip_set_node(
-+        ioc_compat_fm_pcd_manip_params_t *compat_param,
-+        ioc_fm_pcd_manip_params_t *param,
-+        uint8_t compat);
-+
-+void compat_copy_fm_pcd_manip_get_stats(
-+	ioc_compat_fm_pcd_manip_get_stats_t *compat_param,
-+	ioc_fm_pcd_manip_get_stats_t *param,
-+	uint8_t compat);
-+
-+void compat_copy_fm_port_pcd_modify_tree(
-+        ioc_compat_fm_obj_t *compat_id,
-+        ioc_fm_obj_t *id,
-+        uint8_t compat);
-+
-+#if (DPAA_VERSION >= 11)
-+void compat_copy_fm_pcd_frm_replic_group_params(
-+	ioc_compat_fm_pcd_frm_replic_group_params_t *compat_param,
-+	ioc_fm_pcd_frm_replic_group_params_t *param,
-+	uint8_t compat);
-+
-+void compat_copy_fm_pcd_frm_replic_member(
-+	ioc_compat_fm_pcd_frm_replic_member_t *compat_param,
-+	ioc_fm_pcd_frm_replic_member_t *param,
-+	uint8_t compat);
-+
-+void compat_copy_fm_pcd_frm_replic_member_params(
-+	ioc_compat_fm_pcd_frm_replic_member_params_t *compat_param,
-+	ioc_fm_pcd_frm_replic_member_params_t *param,
-+	uint8_t compat);
-+
-+void compat_copy_fm_vsp_params(
-+    ioc_compat_fm_vsp_params_t *compat_param,
-+    ioc_fm_vsp_params_t *param,
-+    uint8_t compat);
-+
-+void compat_copy_fm_buf_pool_depletion_params(
-+    ioc_compat_fm_buf_pool_depletion_params_t *compat_param,
-+    ioc_fm_buf_pool_depletion_params_t *param,
-+    uint8_t compat);
-+
-+void compat_copy_fm_buffer_prefix_content_params(
-+    ioc_compat_fm_buffer_prefix_content_params_t *compat_param,
-+    ioc_fm_buffer_prefix_content_params_t *param,
-+    uint8_t compat);
-+
-+void compat_copy_fm_vsp_config_no_sg_params(
-+    ioc_compat_fm_vsp_config_no_sg_params_t *compat_param,
-+    ioc_fm_vsp_config_no_sg_params_t *param,
-+    uint8_t compat);
-+
-+void compat_copy_fm_vsp_prs_result_params(
-+    ioc_compat_fm_vsp_prs_result_params_t *compat_param,
-+    ioc_fm_vsp_prs_result_params_t *param,
-+    uint8_t compat);
-+
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+void compat_copy_fm_pcd_kg_scheme_spc(
-+        ioc_compat_fm_pcd_kg_scheme_spc_t *compat_param,
-+        ioc_fm_pcd_kg_scheme_spc_t *param,
-+        uint8_t compat);
-+
-+/* } pcd compat functions */
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_resources.h
-@@ -0,0 +1,121 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/*
-+ @File          lnxwrp_resources.h
-+
-+ @Description   FMD wrapper resource allocation functions.
-+
-+*/
-+
-+#ifndef LNXWRP_RESOURCES_H_
-+#define LNXWRP_RESOURCES_H_
-+
-+#if !defined(FMAN_RESOURCES_UNIT_TEST)
-+#include "lnxwrp_fm.h"
-+#else
-+#include "lnxwrp_resources_ut.h"
-+#endif
-+
-+#define ROUND(X) ((2*(X)+1)/2)
-+#define CEIL(X) ((X)+1)
-+/* #define ROUND_DIV(X, Y) (((X)+(Y)/2)/(Y)) */
-+#define ROUND_DIV(X, Y) ((2*(X)+(Y))/(2*(Y)))
-+#define CEIL_DIV(X, Y) (((X)+(Y)-1)/(Y))
-+
-+/* used for resource calculus */
-+#define DPDE_1G 2	/* DQDP 1g - from LLD:
-+				DEFAULT_PORT_txFifoDeqPipelineDepth_1G */
-+#define DPDE_10G 8	/* DQDP 10g - from LLD:
-+				DEFAULT_PORT_txFifoDeqPipelineDepth_10G */
-+
-+int fm_set_active_fman_ports(struct platform_device *of_dev,
-+			  t_LnxWrpFmDev *p_LnxWrpFmDev);
-+
-+/* Calculate the fifosize based on MURAM allocation, number of ports, dpde
-+ * value and s/g software support (! Kernel does not suport s/g).
-+ *
-+ * Algorithm summary:
-+ * - Calculate the the minimum fifosize required for every type of port
-+ * (TX,RX for 1G, 2.5G and 10G).
-+ * - Set TX the minimum fifosize required.
-+ * - Distribute the remaining buffers (after all TX were set) to RX ports
-+ * based on:
-+ *   1G   RX = Remaining_buffers * 1/(1+2.5+10)
-+ *   2.5G RX = Remaining_buffers * 2.5/(1+2.5+10)
-+ *   10G  RX = Remaining_buffers * 10/(1+2.5+10)
-+ * - if the RX is smaller than the minimum required, then set the minimum
-+ * required
-+ * - In the end distribuite the leftovers if there are any (due to
-+ * unprecise calculus) or if over allocation cat some buffers from all RX
-+ * ports w/o pass over minimum required treshold, but if there must be
-+ * pass the treshold in order to cat the over allocation ,then this
-+ * configuration can not be set - KERN_ALERT.
-+*/
-+int fm_precalculate_fifosizes(t_LnxWrpFmDev *p_LnxWrpFmDev,
-+			   int muram_fifo_size);
-+
-+#if !defined(FMAN_RESOURCES_UNIT_TEST)
-+int fm_config_precalculate_fifosize(t_LnxWrpFmPortDev *p_LnxWrpFmPortDev);
-+#endif
-+
-+/* Compute FMan open DMA based on total number of open DMAs and
-+ * number of available fman ports.
-+ *
-+ * By default 10g ports are set to input parameters. The other ports
-+ * tries to keep the proportion rx=2tx open dmas or tresholds.
-+ *
-+ * If leftovers, then those will be set as shared.
-+ *
-+ * If after computing overflow appears, then it decrements open dma
-+ * for all ports w/o cross the tresholds. If the tresholds are meet
-+ * and is still overflow, then it returns error.
-+*/
-+int fm_precalculate_open_dma(t_LnxWrpFmDev *p_LnxWrpFmDev,
-+			  int max_fm_open_dma,
-+			  int default_tx_10g_dmas,
-+			  int default_rx_10g_dmas,
-+			  int min_tx_10g_treshold, int min_rx_10g_treshold);
-+
-+#if !defined(FMAN_RESOURCES_UNIT_TEST)
-+int fm_config_precalculate_open_dma(t_LnxWrpFmPortDev *p_LnxWrpFmPortDev);
-+#endif
-+
-+/* Compute FMan tnums based on available tnums and number of ports.
-+ * Set defaults (minim tresholds) and then distribute leftovers.*/
-+int fm_precalculate_tnums(t_LnxWrpFmDev *p_LnxWrpFmDev, int max_fm_tnums);
-+
-+#if !defined(FMAN_RESOURCES_UNIT_TEST)
-+int fm_config_precalculate_tnums(t_LnxWrpFmPortDev *p_LnxWrpFmPortDev);
-+#endif
-+
-+#endif /* LNXWRP_RESOURCES_H_ */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_resources_ut.c
-@@ -0,0 +1,191 @@
-+/* Copyright (c) 2012 Freescale Semiconductor, Inc.
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "lnxwrp_resources.h"
-+#include "lnxwrp_resources_ut.h"
-+
-+#define KILOBYTE 0x400 /* 1024 */
-+
-+typedef enum e_board_type {
-+	e_p3041,
-+	e_p4080,
-+	e_p5020,
-+	e_p1023
-+} e_board_type;
-+
-+uint8_t board_type;
-+uint32_t muram_size = 0;
-+uint32_t dmas_num = 0;
-+uint32_t task_num = 0;
-+uint32_t frame_size = 0;
-+uint32_t oh_num = 0;
-+uint32_t num_ports_1g = 0;
-+uint32_t num_ports_10g = 0;
-+uint32_t num_ports_2g5 = 0;
-+uint32_t fsl_fman_phy_maxfrm = 0;
-+uint32_t dpa_rx_extra_headroom = 0;
-+
-+void show_help(void){
-+	printf(" help: \n");
-+	printf(" -b <board_type> -f <max_fram_size(mtu)> -o <num_oh_ports> -g1"
-+		" <num_1g_ports> -g10 <num_10g_ports> -g25 <num_2g5_ports>\n");
-+	printf("    Maxim num of DMAS availbale:  P3/P4/P5:32 ,  P1023:16 \n");
-+	printf("    Maxim num of TNUMs availbale: P3/P4/P5:128,  P1023:32 \n");
-+	printf("    Muram size:                   P3/P4/P5:160K, P1023:64K \n");
-+	printf("    Number of ports:\n");
-+	printf("        P3/P5: 5p 1g, 1p 10g, 7p oh \n");
-+	printf("        P4   : 4p 1g, 1p 10g, 7p oh \n");
-+	printf("        P1   : 2p 1g, 0p 10g, 4p oh \n");
-+	printf("    MTU: Default:1522, Jumbo:9600 \n");
-+}
-+
-+int fm_set_param(t_LnxWrpFmDev *p_LnxWrpFmDev) {
-+	struct fm_active_ports *fm_active_ports_info = NULL;
-+	fm_active_ports_info = &p_LnxWrpFmDev->fm_active_ports_info;
-+
-+	switch(board_type){
-+		case e_p3041:
-+		case e_p5020:
-+			muram_size = 160*KILOBYTE;
-+			dmas_num = 32;
-+			task_num = 128;
-+			if ((num_ports_1g+num_ports_2g5) > 5 || num_ports_10g > 1 || oh_num > 7)
-+				goto err_fm_set_param;
-+		break;
-+		case e_p4080:
-+			muram_size = 160*KILOBYTE;
-+			dmas_num = 32;
-+			task_num = 128;
-+			if ((num_ports_1g+num_ports_2g5) > 4 || num_ports_10g > 1 || oh_num > 7)
-+				goto err_fm_set_param;
-+		break;
-+		case e_p1023:
-+			muram_size = 64*KILOBYTE;
-+			dmas_num = 16;
-+			task_num = 128;
-+			if ((num_ports_1g+num_ports_2g5) > 2 || oh_num > 4)
-+				goto err_fm_set_param;
-+		break;
-+		default:
-+			goto err_fm_set_param;
-+		break;
-+	}
-+
-+	p_LnxWrpFmDev->id = 0;
-+	fsl_fman_phy_maxfrm = frame_size;
-+	dpa_rx_extra_headroom = 0; /* ATTENTION: can be != 0 */
-+	fm_active_ports_info->num_oh_ports = oh_num;
-+	fm_active_ports_info->num_tx_ports = num_ports_1g;
-+	fm_active_ports_info->num_rx_ports = num_ports_1g;
-+	fm_active_ports_info->num_tx25_ports = num_ports_2g5;
-+	fm_active_ports_info->num_rx25_ports = num_ports_2g5;
-+	fm_active_ports_info->num_tx10_ports = num_ports_10g;
-+	fm_active_ports_info->num_rx10_ports = num_ports_10g;
-+
-+	return 0;
-+
-+err_fm_set_param:
-+	printf(" ERR: To many ports!!! \n");
-+	return -1;
-+}
-+
-+int main (int argc, char *argv[]){
-+	t_LnxWrpFmDev LnxWrpFmDev;
-+	t_LnxWrpFmDev *p_LnxWrpFmDev = &LnxWrpFmDev;
-+	int tokens_cnt = 1;
-+
-+	char *token = NULL;
-+
-+	while(tokens_cnt < argc)
-+	{
-+	        token = argv[tokens_cnt++];
-+		if (strcmp(token, "-b") == 0){
-+			if(strcmp(argv[tokens_cnt],"p3") == 0)
-+				board_type = e_p3041;
-+			else if(strcmp(argv[tokens_cnt],"p4") == 0)
-+				board_type = e_p4080;
-+			else if(strcmp(argv[tokens_cnt],"p5") == 0)
-+				board_type = e_p5020;
-+			else if(strcmp(argv[tokens_cnt],"p1") == 0)
-+				board_type = e_p1023;
-+			else
-+				show_help();
-+			tokens_cnt++;
-+		}
-+		else if(strcmp(token, "-d") == 0){
-+			dmas_num = atoi(argv[tokens_cnt++]);
-+		}
-+		else if(strcmp(token, "-t") == 0)
-+			task_num = atoi(argv[tokens_cnt++]);
-+		else if(strcmp(token, "-f") == 0)
-+			frame_size = atoi(argv[tokens_cnt++]);
-+		else if(strcmp(token, "-o") == 0)
-+			oh_num = atoi(argv[tokens_cnt++]);
-+		else if(strcmp(token, "-g1") == 0)
-+			num_ports_1g = atoi(argv[tokens_cnt++]);
-+		else if(strcmp(token, "-g10") == 0)
-+			num_ports_10g = atoi(argv[tokens_cnt++]);
-+		else if(strcmp(token, "-g25") == 0)
-+			num_ports_2g5 = atoi(argv[tokens_cnt++]);
-+		else {
-+			show_help();
-+			return -1;
-+		}
-+	}
-+
-+	if(fm_set_param(p_LnxWrpFmDev) < 0){
-+		show_help();
-+		return -1;
-+	}
-+
-+	if(fm_precalculate_fifosizes(
-+		p_LnxWrpFmDev,
-+		128*KILOBYTE)
-+		!= 0)
-+		return -1;
-+	if(fm_precalculate_open_dma(
-+		p_LnxWrpFmDev,
-+		dmas_num,                   /* max open dmas:dpaa_integration_ext.h */
-+		FM_DEFAULT_TX10G_OPENDMA,   /* default TX 10g open dmas */
-+		FM_DEFAULT_RX10G_OPENDMA,   /* default RX 10g open dmas */
-+		FM_10G_OPENDMA_MIN_TRESHOLD,/* TX 10g minimum treshold */
-+		FM_10G_OPENDMA_MIN_TRESHOLD)/* RX 10g minimum treshold */
-+		!= 0)
-+		return -1;
-+	if(fm_precalculate_tnums(
-+		p_LnxWrpFmDev,
-+		task_num) /* max TNUMS: dpa integration file. */
-+		!= 0)
-+		 return -1;
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_resources_ut.h
-@@ -0,0 +1,144 @@
-+/* Copyright (c) 2012 Freescale Semiconductor, Inc
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef FM_RESS_TEST_H_
-+#define FM_RESS_TEST_H_
-+
-+#include <stdint.h>
-+#include <stdbool.h>
-+#include <stdio.h>
-+#include <assert.h>
-+#include <string.h>
-+#include <stdlib.h>
-+
-+#define _Packed
-+#define _PackedType __attribute__ ((packed))
-+#define MAX(x, y) (((x) > (y)) ? (x) : (y))
-+#define MIN(x, y) (((x) < (y)) ? (x) : (y))
-+#define KERN_ALERT ""
-+#define KERN_INFO ""
-+#define ASSERT_COND assert
-+#define printk printf
-+#define NET_IP_ALIGN 0
-+#define FM_FIFO_ALLOCATION_OLD_ALG
-+
-+#if defined(CONFIG_FMAN_DISABLE_OH_AND_DISTRIBUTE_RESOURCES)
-+#define FM_10G_OPENDMA_MIN_TRESHOLD 8 /* 10g minimum treshold if only HC is enabled and no OH port enabled */
-+#define FM_OPENDMA_RX_TX_RAPORT 2 /* RX = 2*TX */
-+#else
-+#define FM_10G_OPENDMA_MIN_TRESHOLD 7 /* 10g minimum treshold if 7 OH ports are enabled */
-+#define FM_OPENDMA_RX_TX_RAPORT 1 /* RX = TX */
-+#endif
-+#define FM_DEFAULT_TX10G_OPENDMA 8 /* default TX 10g open dmas */
-+#define FM_DEFAULT_RX10G_OPENDMA 8 /* default RX 10g open dmas */
-+
-+/* information about all active ports for an FMan.
-+ * !Some ports may be disabled by u-boot, thus will not be available */
-+struct fm_active_ports {
-+    uint32_t num_oh_ports;
-+    uint32_t num_tx_ports;
-+    uint32_t num_rx_ports;
-+    uint32_t num_tx25_ports;
-+    uint32_t num_rx25_ports;
-+    uint32_t num_tx10_ports;
-+    uint32_t num_rx10_ports;
-+};
-+
-+/* FMan resources precalculated at fm probe based
-+ * on available FMan port. */
-+struct fm_resource_settings {
-+    /* buffers - fifo sizes */
-+    uint32_t tx1g_num_buffers;
-+    uint32_t rx1g_num_buffers;
-+    uint32_t tx2g5_num_buffers; /* Not supported yet by LLD */
-+    uint32_t rx2g5_num_buffers; /* Not supported yet by LLD */
-+    uint32_t tx10g_num_buffers;
-+    uint32_t rx10g_num_buffers;
-+    uint32_t oh_num_buffers;
-+    uint32_t shared_ext_buffers;
-+
-+
-+    /* open DMAs */
-+    uint32_t tx_1g_dmas;
-+    uint32_t rx_1g_dmas;
-+    uint32_t tx_2g5_dmas; /* Not supported yet by LLD */
-+    uint32_t rx_2g5_dmas; /* Not supported yet by LLD */
-+    uint32_t tx_10g_dmas;
-+    uint32_t rx_10g_dmas;
-+    uint32_t oh_dmas;
-+    uint32_t shared_ext_open_dma;
-+
-+    /* Tnums */
-+    uint32_t tx_1g_tnums;
-+    uint32_t rx_1g_tnums;
-+    uint32_t tx_2g5_tnums; /* Not supported yet by LLD */
-+    uint32_t rx_2g5_tnums; /* Not supported yet by LLD */
-+    uint32_t tx_10g_tnums;
-+    uint32_t rx_10g_tnums;
-+    uint32_t oh_tnums;
-+    uint32_t shared_ext_tnums;
-+};
-+
-+typedef struct {
-+	uint8_t                     id;
-+    struct fm_active_ports      fm_active_ports_info;
-+    struct fm_resource_settings fm_resource_settings_info;
-+} t_LnxWrpFmDev;
-+
-+typedef struct {
-+	uint8_t                     id;
-+} t_LnxWrpFmPortDev;
-+
-+typedef _Packed struct t_FmPrsResult {
-+	volatile uint8_t     lpid;               /**< Logical port id */
-+	volatile uint8_t     shimr;              /**< Shim header result  */
-+	volatile uint16_t    l2r;                /**< Layer 2 result */
-+	volatile uint16_t    l3r;                /**< Layer 3 result */
-+	volatile uint8_t     l4r;                /**< Layer 4 result */
-+	volatile uint8_t     cplan;              /**< Classification plan id */
-+	volatile uint16_t    nxthdr;             /**< Next Header  */
-+	volatile uint16_t    cksum;              /**< Checksum */
-+	volatile uint32_t    lcv;                /**< LCV */
-+	volatile uint8_t     shim_off[3];        /**< Shim offset */
-+	volatile uint8_t     eth_off;            /**< ETH offset */
-+	volatile uint8_t     llc_snap_off;       /**< LLC_SNAP offset */
-+	volatile uint8_t     vlan_off[2];        /**< VLAN offset */
-+	volatile uint8_t     etype_off;          /**< ETYPE offset */
-+	volatile uint8_t     pppoe_off;          /**< PPP offset */
-+	volatile uint8_t     mpls_off[2];        /**< MPLS offset */
-+	volatile uint8_t     ip_off[2];          /**< IP offset */
-+	volatile uint8_t     gre_off;            /**< GRE offset */
-+	volatile uint8_t     l4_off;             /**< Layer 4 offset */
-+	volatile uint8_t     nxthdr_off;         /**< Parser end point */
-+} _PackedType t_FmPrsResult;
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_resources_ut.make
-@@ -0,0 +1,28 @@
-+CC=gcc
-+
-+LNXWRP_RESS_UT=lnxwrp_resources_ut
-+OBJ=lnxwrp_resources
-+
-+INC_PATH=
-+LIB_PATH=
-+
-+INC=$(addprefix -I,$(INC_PATH))
-+LIB=$(addprefix -L,$(LIB_PATH))
-+
-+CFLAGS= -gdwarf-2 -g -O0 -Wall
-+XFLAGS= -DFMAN_RESOURCES_UNIT_TEST
-+
-+all: $(LNXWRP_RESS_UT)
-+
-+$(LNXWRP_RESS_UT):$(addsuffix .o,$(OBJ)) $(LNXWRP_RESS_UT).o
-+	$(CC) -o $(LNXWRP_RESS_UT) $(LNXWRP_RESS_UT).o $(addsuffix .o,$(OBJ))
-+
-+%.o: %.c
-+	@(echo "        (CC)  $@")
-+	@($(CC) $(INC) $(CFLAGS) $(XFLAGS) -o $(@) -c $<)
-+
-+.PHONY: clean
-+
-+clean:
-+	rm -f *.o
-+	rm -f $(LNXWRP_RESS_UT)
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs.c
-@@ -0,0 +1,60 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/*
-+ @File          lnxwrp_sysfs.c
-+
-+ @Description   FM wrapper sysfs related functions.
-+
-+*/
-+
-+#include <linux/types.h>
-+#include "lnxwrp_sysfs.h"
-+
-+uint8_t fm_find_statistic_counter_by_name(const char *attr_name,
-+				const struct sysfs_stats_t *sysfs_stats,
-+				uint8_t *offset)
-+{
-+	int i = 0;
-+
-+	while (sysfs_stats[i].stat_name != NULL) {
-+		if (strcmp(sysfs_stats[i].stat_name, attr_name) == 0) {
-+			if (offset != NULL)
-+				*offset = i;
-+			return sysfs_stats[i].stat_counter;
-+		}
-+
-+		i++;
-+	}
-+	WARN(1, "FMD: Should never get here!");
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs.h
-@@ -0,0 +1,60 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef LNXWRP_SYSFS_H_
-+#define LNXWRP_SYSFS_H_
-+
-+/* Linux Headers ------------------- */
-+#include <linux/version.h>
-+
-+#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
-+#define MODVERSIONS
-+#endif
-+#ifdef MODVERSIONS
-+#include <config/modversions.h>
-+#endif /* MODVERSIONS */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/sysfs.h>
-+
-+struct sysfs_stats_t {
-+	const char *stat_name;
-+	uint8_t stat_counter;
-+};
-+
-+uint8_t fm_find_statistic_counter_by_name(const char *attr_name,
-+				const struct sysfs_stats_t *sysfs_stats,
-+				uint8_t *offset);
-+
-+#endif /* LNXWRP_SYSFS_H_ */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs_fm.c
-@@ -0,0 +1,1855 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "lnxwrp_sysfs.h"
-+#include "lnxwrp_sysfs_fm.h"
-+#include "lnxwrp_fm.h"
-+
-+#include "../../sdk_fman/Peripherals/FM/inc/fm_common.h"
-+#include "../../sdk_fman/Peripherals/FM/Pcd/fm_pcd.h"
-+#include "../../sdk_fman/Peripherals/FM/Pcd/fm_kg.h"
-+#include "../../sdk_fman/Peripherals/FM/Pcd/fm_plcr.h"
-+
-+#if defined(__ERR_MODULE__)
-+#undef __ERR_MODULE__
-+#endif
-+
-+#include "../../sdk_fman/Peripherals/FM/fm.h"
-+#include <linux/delay.h>
-+
-+
-+static int fm_get_counter(void *h_fm, e_FmCounters cnt_e, uint32_t *cnt_val);
-+
-+enum fm_dma_match_stats {
-+	FM_DMA_COUNTERS_CMQ_NOT_EMPTY,
-+	FM_DMA_COUNTERS_BUS_ERROR,
-+	FM_DMA_COUNTERS_READ_BUF_ECC_ERROR,
-+	FM_DMA_COUNTERS_WRITE_BUF_ECC_SYS_ERROR,
-+	FM_DMA_COUNTERS_WRITE_BUF_ECC_FM_ERROR
-+};
-+
-+static const struct sysfs_stats_t fm_sysfs_stats[] = {
-+	/* FM statistics */
-+	{
-+	 .stat_name = "enq_total_frame",
-+	 .stat_counter = e_FM_COUNTERS_ENQ_TOTAL_FRAME,
-+	 },
-+	{
-+	 .stat_name = "deq_total_frame",
-+	 .stat_counter = e_FM_COUNTERS_DEQ_TOTAL_FRAME,
-+	 },
-+	{
-+	 .stat_name = "deq_0",
-+	 .stat_counter = e_FM_COUNTERS_DEQ_0,
-+	 },
-+	{
-+	 .stat_name = "deq_1",
-+	 .stat_counter = e_FM_COUNTERS_DEQ_1,
-+	 },
-+	{
-+	 .stat_name = "deq_2",
-+	 .stat_counter = e_FM_COUNTERS_DEQ_2,
-+	 },
-+	{
-+	 .stat_name = "deq_3",
-+	 .stat_counter = e_FM_COUNTERS_DEQ_3,
-+	 },
-+	{
-+	 .stat_name = "deq_from_default",
-+	 .stat_counter = e_FM_COUNTERS_DEQ_FROM_DEFAULT,
-+	 },
-+	{
-+	 .stat_name = "deq_from_context",
-+	 .stat_counter = e_FM_COUNTERS_DEQ_FROM_CONTEXT,
-+	 },
-+	{
-+	 .stat_name = "deq_from_fd",
-+	 .stat_counter = e_FM_COUNTERS_DEQ_FROM_FD,
-+	 },
-+	{
-+	 .stat_name = "deq_confirm",
-+	 .stat_counter = e_FM_COUNTERS_DEQ_CONFIRM,
-+	 },
-+	/* FM:DMA  statistics */
-+	{
-+	 .stat_name = "cmq_not_empty",
-+	 .stat_counter = FM_DMA_COUNTERS_CMQ_NOT_EMPTY,
-+	 },
-+	{
-+	 .stat_name = "bus_error",
-+	 .stat_counter = FM_DMA_COUNTERS_BUS_ERROR,
-+	 },
-+	{
-+	 .stat_name = "read_buf_ecc_error",
-+	 .stat_counter = FM_DMA_COUNTERS_READ_BUF_ECC_ERROR,
-+	 },
-+	{
-+	 .stat_name = "write_buf_ecc_sys_error",
-+	 .stat_counter = FM_DMA_COUNTERS_WRITE_BUF_ECC_SYS_ERROR,
-+	 },
-+	{
-+	 .stat_name = "write_buf_ecc_fm_error",
-+	 .stat_counter = FM_DMA_COUNTERS_WRITE_BUF_ECC_FM_ERROR,
-+	 },
-+	/* FM:PCD  statistics */
-+	{
-+	 .stat_name = "pcd_kg_total",
-+	 .stat_counter = e_FM_PCD_KG_COUNTERS_TOTAL,
-+	 },
-+	{
-+	 .stat_name = "pcd_plcr_yellow",
-+	 .stat_counter = e_FM_PCD_PLCR_COUNTERS_YELLOW,
-+	 },
-+	{
-+	 .stat_name = "pcd_plcr_red",
-+	 .stat_counter = e_FM_PCD_PLCR_COUNTERS_RED,
-+	 },
-+	{
-+	 .stat_name = "pcd_plcr_recolored_to_red",
-+	 .stat_counter = e_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_RED,
-+	 },
-+	{
-+	 .stat_name = "pcd_plcr_recolored_to_yellow",
-+	 .stat_counter = e_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_YELLOW,
-+	 },
-+	{
-+	 .stat_name = "pcd_plcr_total",
-+	 .stat_counter = e_FM_PCD_PLCR_COUNTERS_TOTAL,
-+	 },
-+	{
-+	 .stat_name = "pcd_plcr_length_mismatch",
-+	 .stat_counter = e_FM_PCD_PLCR_COUNTERS_LENGTH_MISMATCH,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_parse_dispatch",
-+	 .stat_counter = e_FM_PCD_PRS_COUNTERS_PARSE_DISPATCH,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_l2_parse_result_returned",
-+	 .stat_counter = e_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_l3_parse_result_returned",
-+	 .stat_counter = e_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_l4_parse_result_returned",
-+	 .stat_counter = e_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_shim_parse_result_returned",
-+	 .stat_counter = e_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_l2_parse_result_returned_with_err",
-+	 .stat_counter =
-+	 e_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED_WITH_ERR,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_l3_parse_result_returned_with_err",
-+	 .stat_counter =
-+	 e_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED_WITH_ERR,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_l4_parse_result_returned_with_err",
-+	 .stat_counter =
-+	 e_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED_WITH_ERR,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_shim_parse_result_returned_with_err",
-+	 .stat_counter =
-+	 e_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED_WITH_ERR,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_soft_prs_cycles",
-+	 .stat_counter = e_FM_PCD_PRS_COUNTERS_SOFT_PRS_CYCLES,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_soft_prs_stall_cycles",
-+	 .stat_counter = e_FM_PCD_PRS_COUNTERS_SOFT_PRS_STALL_CYCLES,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_hard_prs_cycle_incl_stall_cycles",
-+	 .stat_counter =
-+	 e_FM_PCD_PRS_COUNTERS_HARD_PRS_CYCLE_INCL_STALL_CYCLES,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_muram_read_cycles",
-+	 .stat_counter = e_FM_PCD_PRS_COUNTERS_MURAM_READ_CYCLES,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_muram_read_stall_cycles",
-+	 .stat_counter = e_FM_PCD_PRS_COUNTERS_MURAM_READ_STALL_CYCLES,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_muram_write_cycles",
-+	 .stat_counter = e_FM_PCD_PRS_COUNTERS_MURAM_WRITE_CYCLES,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_muram_write_stall_cycles",
-+	 .stat_counter = e_FM_PCD_PRS_COUNTERS_MURAM_WRITE_STALL_CYCLES,
-+	 },
-+	{
-+	 .stat_name = "pcd_prs_fpm_command_stall_cycles",
-+	 .stat_counter = e_FM_PCD_PRS_COUNTERS_FPM_COMMAND_STALL_CYCLES,
-+	 },
-+	{}
-+};
-+
-+
-+static ssize_t show_fm_risc_load(struct device *dev,
-+			struct device_attribute *attr, char *buf)
-+{
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+	unsigned long flags;
-+	int m =0;
-+	int err =0;
-+	unsigned n = 0;
-+	t_FmCtrlMon     util;
-+	uint8_t         i =0 ;
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	if (!p_wrp_fm_dev->active || !p_wrp_fm_dev->h_Dev)
-+		return -EIO;
-+
-+	local_irq_save(flags);
-+
-+	/* Calculate risc load */
-+	FM_CtrlMonStart(p_wrp_fm_dev->h_Dev);
-+	msleep(1000);
-+	FM_CtrlMonStop(p_wrp_fm_dev->h_Dev);
-+
-+	for (i = 0; i < FM_NUM_OF_CTRL; i++) {
-+		err |= FM_CtrlMonGetCounters(p_wrp_fm_dev->h_Dev, i, &util);
-+		m = snprintf(&buf[n],PAGE_SIZE,"\tRisc%u: util-%u%%, efficiency-%u%%\n",
-+				i, util.percentCnt[0], util.percentCnt[1]);
-+		n=m+n;
-+	}
-+
-+	local_irq_restore(flags);
-+
-+	return n;
-+}
-+
-+/* Fm stats and regs dumps via sysfs */
-+static ssize_t show_fm_dma_stats(struct device *dev,
-+				struct device_attribute *attr, char *buf)
-+{
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+	t_FmDmaStatus dma_status;
-+	unsigned long flags = 0;
-+	unsigned n = 0;
-+	uint8_t counter_value = 0, counter = 0;
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	if (!p_wrp_fm_dev->active || !p_wrp_fm_dev->h_Dev)
-+		return -EIO;
-+
-+	counter = fm_find_statistic_counter_by_name(
-+			attr->attr.name,
-+			fm_sysfs_stats, NULL);
-+
-+	local_irq_save(flags);
-+
-+	memset(&dma_status, 0, sizeof(dma_status));
-+	FM_GetDmaStatus(p_wrp_fm_dev->h_Dev, &dma_status);
-+
-+	switch (counter) {
-+	case FM_DMA_COUNTERS_CMQ_NOT_EMPTY:
-+		counter_value = dma_status.cmqNotEmpty;
-+		break;
-+	case FM_DMA_COUNTERS_BUS_ERROR:
-+		counter_value = dma_status.busError;
-+		break;
-+	case FM_DMA_COUNTERS_READ_BUF_ECC_ERROR:
-+		counter_value = dma_status.readBufEccError;
-+		break;
-+	case FM_DMA_COUNTERS_WRITE_BUF_ECC_SYS_ERROR:
-+		counter_value = dma_status.writeBufEccSysError;
-+		break;
-+	case FM_DMA_COUNTERS_WRITE_BUF_ECC_FM_ERROR:
-+		counter_value = dma_status.writeBufEccFmError;
-+		break;
-+	default:
-+		WARN(1, "FMD: failure at %s:%d/%s()!\n", __FILE__, __LINE__,
-+			__func__);
-+		break;
-+	};
-+
-+	n = snprintf(buf, PAGE_SIZE, "\tFM %u counter: %c\n",
-+		p_wrp_fm_dev->id, counter_value ? 'T' : 'F');
-+
-+	local_irq_restore(flags);
-+
-+	return n;
-+}
-+
-+static ssize_t show_fm_stats(struct device *dev,
-+			     struct device_attribute *attr, char *buf)
-+{
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+	unsigned long flags = 0;
-+	unsigned n = 0, cnt_e = 0;
-+	uint32_t cnt_val;
-+	int err;
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	if (!p_wrp_fm_dev->active || !p_wrp_fm_dev->h_Dev)
-+		return -EIO;
-+
-+	cnt_e = fm_find_statistic_counter_by_name(
-+			attr->attr.name,
-+			fm_sysfs_stats, NULL);
-+
-+	err = fm_get_counter(p_wrp_fm_dev->h_Dev,
-+		(e_FmCounters) cnt_e, &cnt_val);
-+
-+	if (err)
-+		return err;
-+
-+	local_irq_save(flags);
-+
-+	n = snprintf(buf, PAGE_SIZE, "\tFM %d counter: %d\n",
-+			p_wrp_fm_dev->id, cnt_val);
-+
-+	local_irq_restore(flags);
-+
-+	return n;
-+}
-+
-+static ssize_t show_fm_muram_free_sz(struct device *dev,
-+				struct device_attribute *attr, char *buf)
-+{
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+	unsigned long flags = 0;
-+	unsigned n = 0;
-+	uint64_t muram_free_size = 0;
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	if (!p_wrp_fm_dev->active || !p_wrp_fm_dev->h_Dev)
-+		return -EIO;
-+
-+	muram_free_size = FM_MURAM_GetFreeMemSize(p_wrp_fm_dev->h_MuramDev);
-+
-+	local_irq_save(flags);
-+
-+	n = snprintf(buf, PAGE_SIZE, "\tFM %d muram_free_size: %lld\n",
-+			p_wrp_fm_dev->id, muram_free_size);
-+
-+	local_irq_restore(flags);
-+
-+	return n;
-+}
-+
-+static ssize_t show_fm_ctrl_code_ver(struct device *dev,
-+				struct device_attribute *attr, char *buf)
-+{
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+	unsigned long flags = 0;
-+	unsigned n = 0;
-+	t_FmCtrlCodeRevisionInfo rv_info;
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	if (!p_wrp_fm_dev->active || !p_wrp_fm_dev->h_Dev)
-+		return -EIO;
-+
-+	FM_GetFmanCtrlCodeRevision((t_Fm *)p_wrp_fm_dev->h_Dev, &rv_info);
-+
-+	local_irq_save(flags);
-+
-+	FM_DMP_LN(buf, n, "- FM %d ctrl code pkg info:\n", p_wrp_fm_dev->id);
-+	FM_DMP_LN(buf, n, "Package rev: %d\n", rv_info.packageRev);
-+	FM_DMP_LN(buf, n, "major rev: %d\n", rv_info.majorRev);
-+	FM_DMP_LN(buf, n, "minor rev: %d\n", rv_info.minorRev);
-+
-+	local_irq_restore(flags);
-+
-+	return n;
-+}
-+
-+static ssize_t show_fm_pcd_stats(struct device *dev,
-+				struct device_attribute *attr, char *buf)
-+{
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+	unsigned long flags = 0;
-+	unsigned n = 0, counter = 0;
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	if (!p_wrp_fm_dev->active || !p_wrp_fm_dev->h_Dev ||
-+			!p_wrp_fm_dev->h_PcdDev)
-+		return -EIO;
-+
-+	counter = fm_find_statistic_counter_by_name(
-+			attr->attr.name,
-+			fm_sysfs_stats, NULL);
-+
-+	local_irq_save(flags);
-+
-+	n = snprintf(buf, PAGE_SIZE, "\tFM %d counter: %d\n",
-+			p_wrp_fm_dev->id,
-+			FM_PCD_GetCounter(p_wrp_fm_dev->h_PcdDev,
-+					(e_FmPcdCounters) counter));
-+
-+	local_irq_restore(flags);
-+
-+	return n;
-+}
-+
-+static ssize_t show_fm_tnum_dbg(struct device *dev,
-+				struct device_attribute *attr,
-+				char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+#endif
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	local_irq_save(flags);
-+
-+	if (!p_wrp_fm_dev->active)
-+		return -EIO;
-+	else {
-+		int tn_s;
-+
-+		if (!sscanf(attr->attr.name, "tnum_dbg_%d", &tn_s))
-+			return -EINVAL;
-+
-+		n = fm_dump_tnum_dbg(p_wrp_fm_dev->h_Dev,
-+					tn_s, tn_s + 15, buf, n);
-+	}
-+	local_irq_restore(flags);
-+#else
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+			"Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+	return n;
-+}
-+
-+static ssize_t show_fm_cls_plan(struct device *dev,
-+				struct device_attribute *attr,
-+				char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+#endif
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	local_irq_save(flags);
-+
-+	n = snprintf(buf, PAGE_SIZE, "\n FM-KG classification plan dump.\n");
-+
-+	if (!p_wrp_fm_dev->active || !p_wrp_fm_dev->h_PcdDev)
-+		return -EIO;
-+	else {
-+		int cpn;
-+
-+		if (!sscanf(attr->attr.name, "cls_plan_%d", &cpn))
-+			return -EINVAL;
-+
-+		n = fm_dump_cls_plan(p_wrp_fm_dev->h_PcdDev, cpn, buf, n);
-+	}
-+	local_irq_restore(flags);
-+#else
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+			"Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+	return n;
-+}
-+
-+static ssize_t show_fm_profiles(struct device *dev,
-+				struct device_attribute *attr,
-+				char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+#endif
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	local_irq_save(flags);
-+
-+	n = snprintf(buf, PAGE_SIZE, "FM policer profile dump.\n");
-+
-+	if (!p_wrp_fm_dev->active || !p_wrp_fm_dev->h_PcdDev)
-+		return -EIO;
-+	else {
-+		int pn;
-+
-+		if (!sscanf(attr->attr.name, "profile_%d", &pn))
-+			return -EINVAL;
-+
-+		n = fm_profile_dump_regs(p_wrp_fm_dev->h_PcdDev, pn, buf, n);
-+	}
-+	local_irq_restore(flags);
-+#else
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+			"Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+	return n;
-+}
-+
-+static ssize_t show_fm_schemes(struct device *dev,
-+				struct device_attribute *attr,
-+				char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+#endif
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	local_irq_save(flags);
-+
-+	n = snprintf(buf, PAGE_SIZE, "FM-KG driver schemes dump.\n");
-+
-+	if (!p_wrp_fm_dev->active || !p_wrp_fm_dev->h_PcdDev)
-+		return -EIO;
-+	else {
-+		int sn;
-+
-+		if (!sscanf(attr->attr.name, "scheme_%d", &sn))
-+			return -EINVAL;
-+
-+		n = fm_dump_scheme(p_wrp_fm_dev->h_PcdDev, sn, buf, n);
-+	}
-+	local_irq_restore(flags);
-+#else
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+		     "Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+	return n;
-+}
-+
-+/* FM */
-+static DEVICE_ATTR(enq_total_frame, S_IRUGO, show_fm_stats, NULL);
-+static DEVICE_ATTR(deq_total_frame, S_IRUGO, show_fm_stats, NULL);
-+static DEVICE_ATTR(fm_risc_load_val, S_IRUGO, show_fm_risc_load, NULL);
-+static DEVICE_ATTR(deq_0, S_IRUGO, show_fm_stats, NULL);
-+static DEVICE_ATTR(deq_1, S_IRUGO, show_fm_stats, NULL);
-+static DEVICE_ATTR(deq_2, S_IRUGO, show_fm_stats, NULL);
-+static DEVICE_ATTR(deq_3, S_IRUGO, show_fm_stats, NULL);
-+static DEVICE_ATTR(deq_from_default, S_IRUGO, show_fm_stats, NULL);
-+static DEVICE_ATTR(deq_from_context, S_IRUGO, show_fm_stats, NULL);
-+static DEVICE_ATTR(deq_from_fd, S_IRUGO, show_fm_stats, NULL);
-+static DEVICE_ATTR(deq_confirm, S_IRUGO, show_fm_stats, NULL);
-+/* FM:DMA */
-+static DEVICE_ATTR(cmq_not_empty, S_IRUGO, show_fm_dma_stats, NULL);
-+static DEVICE_ATTR(bus_error, S_IRUGO, show_fm_dma_stats, NULL);
-+static DEVICE_ATTR(read_buf_ecc_error, S_IRUGO, show_fm_dma_stats, NULL);
-+static DEVICE_ATTR(write_buf_ecc_sys_error, S_IRUGO, show_fm_dma_stats, NULL);
-+static DEVICE_ATTR(write_buf_ecc_fm_error, S_IRUGO, show_fm_dma_stats, NULL);
-+/* FM:PCD */
-+static DEVICE_ATTR(pcd_kg_total, S_IRUGO, show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_plcr_yellow, S_IRUGO, show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_plcr_red, S_IRUGO, show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_plcr_recolored_to_red, S_IRUGO, show_fm_pcd_stats,
-+		   NULL);
-+static DEVICE_ATTR(pcd_plcr_recolored_to_yellow, S_IRUGO, show_fm_pcd_stats,
-+		   NULL);
-+static DEVICE_ATTR(pcd_plcr_total, S_IRUGO, show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_plcr_length_mismatch, S_IRUGO, show_fm_pcd_stats,
-+		   NULL);
-+static DEVICE_ATTR(pcd_prs_parse_dispatch, S_IRUGO, show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_prs_l2_parse_result_returned, S_IRUGO,
-+		   show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_prs_l3_parse_result_returned, S_IRUGO,
-+		   show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_prs_l4_parse_result_returned, S_IRUGO,
-+		   show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_prs_shim_parse_result_returned, S_IRUGO,
-+		   show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_prs_l2_parse_result_returned_with_err, S_IRUGO,
-+		   show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_prs_l3_parse_result_returned_with_err, S_IRUGO,
-+		   show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_prs_l4_parse_result_returned_with_err, S_IRUGO,
-+		   show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_prs_shim_parse_result_returned_with_err, S_IRUGO,
-+		   show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_prs_soft_prs_cycles, S_IRUGO, show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_prs_soft_prs_stall_cycles, S_IRUGO, show_fm_pcd_stats,
-+		   NULL);
-+static DEVICE_ATTR(pcd_prs_hard_prs_cycle_incl_stall_cycles, S_IRUGO,
-+		   show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_prs_muram_read_cycles, S_IRUGO, show_fm_pcd_stats,
-+		   NULL);
-+static DEVICE_ATTR(pcd_prs_muram_read_stall_cycles, S_IRUGO,
-+		   show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_prs_muram_write_cycles, S_IRUGO, show_fm_pcd_stats,
-+		   NULL);
-+static DEVICE_ATTR(pcd_prs_muram_write_stall_cycles, S_IRUGO,
-+		   show_fm_pcd_stats, NULL);
-+static DEVICE_ATTR(pcd_prs_fpm_command_stall_cycles, S_IRUGO,
-+		   show_fm_pcd_stats, NULL);
-+
-+static DEVICE_ATTR(tnum_dbg_0, S_IRUGO, show_fm_tnum_dbg, NULL);
-+static DEVICE_ATTR(tnum_dbg_16, S_IRUGO, show_fm_tnum_dbg, NULL);
-+static DEVICE_ATTR(tnum_dbg_32, S_IRUGO, show_fm_tnum_dbg, NULL);
-+static DEVICE_ATTR(tnum_dbg_48, S_IRUGO, show_fm_tnum_dbg, NULL);
-+static DEVICE_ATTR(tnum_dbg_64, S_IRUGO, show_fm_tnum_dbg, NULL);
-+static DEVICE_ATTR(tnum_dbg_80, S_IRUGO, show_fm_tnum_dbg, NULL);
-+static DEVICE_ATTR(tnum_dbg_96, S_IRUGO, show_fm_tnum_dbg, NULL);
-+static DEVICE_ATTR(tnum_dbg_112, S_IRUGO, show_fm_tnum_dbg, NULL);
-+
-+static DEVICE_ATTR(cls_plan_0, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_1, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_2, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_3, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_4, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_5, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_6, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_7, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_8, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_9, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_10, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_11, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_12, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_13, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_14, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_15, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_16, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_17, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_18, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_19, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_20, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_21, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_22, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_23, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_24, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_25, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_26, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_27, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_28, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_29, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_30, S_IRUGO, show_fm_cls_plan, NULL);
-+static DEVICE_ATTR(cls_plan_31, S_IRUGO, show_fm_cls_plan, NULL);
-+
-+static DEVICE_ATTR(profile_0, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_1, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_2, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_3, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_4, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_5, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_6, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_7, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_8, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_9, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_10, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_11, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_12, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_13, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_14, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_15, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_16, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_17, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_18, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_19, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_20, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_21, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_22, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_23, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_24, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_25, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_26, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_27, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_28, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_29, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_30, S_IRUGO, show_fm_profiles, NULL);
-+static DEVICE_ATTR(profile_31, S_IRUGO, show_fm_profiles, NULL);
-+
-+static DEVICE_ATTR(scheme_0, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_1, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_2, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_3, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_4, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_5, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_6, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_7, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_8, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_9, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_10, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_11, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_12, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_13, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_14, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_15, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_16, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_17, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_18, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_19, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_20, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_21, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_22, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_23, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_24, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_25, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_26, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_27, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_28, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_29, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_30, S_IRUGO, show_fm_schemes, NULL);
-+static DEVICE_ATTR(scheme_31, S_IRUGO, show_fm_schemes, NULL);
-+
-+
-+static struct attribute *fm_dev_stats_attributes[] = {
-+	&dev_attr_enq_total_frame.attr,
-+	&dev_attr_deq_total_frame.attr,
-+	&dev_attr_deq_0.attr,
-+	&dev_attr_deq_1.attr,
-+	&dev_attr_deq_2.attr,
-+	&dev_attr_deq_3.attr,
-+	&dev_attr_deq_from_default.attr,
-+	&dev_attr_deq_from_context.attr,
-+	&dev_attr_deq_from_fd.attr,
-+	&dev_attr_deq_confirm.attr,
-+	&dev_attr_cmq_not_empty.attr,
-+	&dev_attr_bus_error.attr,
-+	&dev_attr_read_buf_ecc_error.attr,
-+	&dev_attr_write_buf_ecc_sys_error.attr,
-+	&dev_attr_write_buf_ecc_fm_error.attr,
-+	&dev_attr_pcd_kg_total.attr,
-+	&dev_attr_pcd_plcr_yellow.attr,
-+	&dev_attr_pcd_plcr_red.attr,
-+	&dev_attr_pcd_plcr_recolored_to_red.attr,
-+	&dev_attr_pcd_plcr_recolored_to_yellow.attr,
-+	&dev_attr_pcd_plcr_total.attr,
-+	&dev_attr_pcd_plcr_length_mismatch.attr,
-+	&dev_attr_pcd_prs_parse_dispatch.attr,
-+	&dev_attr_pcd_prs_l2_parse_result_returned.attr,
-+	&dev_attr_pcd_prs_l3_parse_result_returned.attr,
-+	&dev_attr_pcd_prs_l4_parse_result_returned.attr,
-+	&dev_attr_pcd_prs_shim_parse_result_returned.attr,
-+	&dev_attr_pcd_prs_l2_parse_result_returned_with_err.attr,
-+	&dev_attr_pcd_prs_l3_parse_result_returned_with_err.attr,
-+	&dev_attr_pcd_prs_l4_parse_result_returned_with_err.attr,
-+	&dev_attr_pcd_prs_shim_parse_result_returned_with_err.attr,
-+	&dev_attr_pcd_prs_soft_prs_cycles.attr,
-+	&dev_attr_pcd_prs_soft_prs_stall_cycles.attr,
-+	&dev_attr_pcd_prs_hard_prs_cycle_incl_stall_cycles.attr,
-+	&dev_attr_pcd_prs_muram_read_cycles.attr,
-+	&dev_attr_pcd_prs_muram_read_stall_cycles.attr,
-+	&dev_attr_pcd_prs_muram_write_cycles.attr,
-+	&dev_attr_pcd_prs_muram_write_stall_cycles.attr,
-+	&dev_attr_pcd_prs_fpm_command_stall_cycles.attr,
-+	NULL
-+};
-+
-+static struct attribute *fm_dev_tnums_dbg_attributes[] = {
-+	&dev_attr_tnum_dbg_0.attr,
-+	&dev_attr_tnum_dbg_16.attr,
-+	&dev_attr_tnum_dbg_32.attr,
-+	&dev_attr_tnum_dbg_48.attr,
-+	&dev_attr_tnum_dbg_64.attr,
-+	&dev_attr_tnum_dbg_80.attr,
-+	&dev_attr_tnum_dbg_96.attr,
-+	&dev_attr_tnum_dbg_112.attr,
-+	NULL
-+};
-+
-+static struct attribute *fm_dev_cls_plans_attributes[] = {
-+	&dev_attr_cls_plan_0.attr,
-+	&dev_attr_cls_plan_1.attr,
-+	&dev_attr_cls_plan_2.attr,
-+	&dev_attr_cls_plan_3.attr,
-+	&dev_attr_cls_plan_4.attr,
-+	&dev_attr_cls_plan_5.attr,
-+	&dev_attr_cls_plan_6.attr,
-+	&dev_attr_cls_plan_7.attr,
-+	&dev_attr_cls_plan_8.attr,
-+	&dev_attr_cls_plan_9.attr,
-+	&dev_attr_cls_plan_10.attr,
-+	&dev_attr_cls_plan_11.attr,
-+	&dev_attr_cls_plan_12.attr,
-+	&dev_attr_cls_plan_13.attr,
-+	&dev_attr_cls_plan_14.attr,
-+	&dev_attr_cls_plan_15.attr,
-+	&dev_attr_cls_plan_16.attr,
-+	&dev_attr_cls_plan_17.attr,
-+	&dev_attr_cls_plan_18.attr,
-+	&dev_attr_cls_plan_19.attr,
-+	&dev_attr_cls_plan_20.attr,
-+	&dev_attr_cls_plan_21.attr,
-+	&dev_attr_cls_plan_22.attr,
-+	&dev_attr_cls_plan_23.attr,
-+	&dev_attr_cls_plan_24.attr,
-+	&dev_attr_cls_plan_25.attr,
-+	&dev_attr_cls_plan_26.attr,
-+	&dev_attr_cls_plan_27.attr,
-+	&dev_attr_cls_plan_28.attr,
-+	&dev_attr_cls_plan_29.attr,
-+	&dev_attr_cls_plan_30.attr,
-+	&dev_attr_cls_plan_31.attr,
-+	NULL
-+};
-+
-+static struct attribute *fm_dev_profiles_attributes[] = {
-+	&dev_attr_profile_0.attr,
-+	&dev_attr_profile_1.attr,
-+	&dev_attr_profile_2.attr,
-+	&dev_attr_profile_3.attr,
-+	&dev_attr_profile_4.attr,
-+	&dev_attr_profile_5.attr,
-+	&dev_attr_profile_6.attr,
-+	&dev_attr_profile_7.attr,
-+	&dev_attr_profile_8.attr,
-+	&dev_attr_profile_9.attr,
-+	&dev_attr_profile_10.attr,
-+	&dev_attr_profile_11.attr,
-+	&dev_attr_profile_12.attr,
-+	&dev_attr_profile_13.attr,
-+	&dev_attr_profile_14.attr,
-+	&dev_attr_profile_15.attr,
-+	&dev_attr_profile_16.attr,
-+	&dev_attr_profile_17.attr,
-+	&dev_attr_profile_18.attr,
-+	&dev_attr_profile_19.attr,
-+	&dev_attr_profile_20.attr,
-+	&dev_attr_profile_21.attr,
-+	&dev_attr_profile_22.attr,
-+	&dev_attr_profile_23.attr,
-+	&dev_attr_profile_24.attr,
-+	&dev_attr_profile_25.attr,
-+	&dev_attr_profile_26.attr,
-+	&dev_attr_profile_27.attr,
-+	&dev_attr_profile_28.attr,
-+	&dev_attr_profile_29.attr,
-+	&dev_attr_profile_30.attr,
-+	&dev_attr_profile_31.attr,
-+	NULL
-+};
-+
-+static struct attribute *fm_dev_schemes_attributes[] = {
-+	&dev_attr_scheme_0.attr,
-+	&dev_attr_scheme_1.attr,
-+	&dev_attr_scheme_2.attr,
-+	&dev_attr_scheme_3.attr,
-+	&dev_attr_scheme_4.attr,
-+	&dev_attr_scheme_5.attr,
-+	&dev_attr_scheme_6.attr,
-+	&dev_attr_scheme_7.attr,
-+	&dev_attr_scheme_8.attr,
-+	&dev_attr_scheme_9.attr,
-+	&dev_attr_scheme_10.attr,
-+	&dev_attr_scheme_11.attr,
-+	&dev_attr_scheme_12.attr,
-+	&dev_attr_scheme_13.attr,
-+	&dev_attr_scheme_14.attr,
-+	&dev_attr_scheme_15.attr,
-+	&dev_attr_scheme_16.attr,
-+	&dev_attr_scheme_17.attr,
-+	&dev_attr_scheme_18.attr,
-+	&dev_attr_scheme_19.attr,
-+	&dev_attr_scheme_20.attr,
-+	&dev_attr_scheme_21.attr,
-+	&dev_attr_scheme_22.attr,
-+	&dev_attr_scheme_23.attr,
-+	&dev_attr_scheme_24.attr,
-+	&dev_attr_scheme_25.attr,
-+	&dev_attr_scheme_26.attr,
-+	&dev_attr_scheme_27.attr,
-+	&dev_attr_scheme_28.attr,
-+	&dev_attr_scheme_29.attr,
-+	&dev_attr_scheme_30.attr,
-+	&dev_attr_scheme_31.attr,
-+	NULL
-+};
-+
-+static const struct attribute_group fm_dev_stats_attr_grp = {
-+	.name = "statistics",
-+	.attrs = fm_dev_stats_attributes
-+};
-+
-+static const struct attribute_group fm_dev_tnums_dbg_attr_grp = {
-+	.name = "tnums_dbg",
-+	.attrs = fm_dev_tnums_dbg_attributes
-+};
-+
-+static const struct attribute_group fm_dev_cls_plans_attr_grp = {
-+	.name = "cls_plans",
-+	.attrs = fm_dev_cls_plans_attributes
-+};
-+
-+static const struct attribute_group fm_dev_schemes_attr_grp = {
-+	.name = "schemes",
-+	.attrs = fm_dev_schemes_attributes
-+};
-+
-+static const struct attribute_group fm_dev_profiles_attr_grp = {
-+	.name = "profiles",
-+	.attrs = fm_dev_profiles_attributes
-+};
-+
-+static ssize_t show_fm_regs(struct device *dev,
-+				struct device_attribute *attr,
-+				char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+#endif
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	local_irq_save(flags);
-+
-+	n = snprintf(buf, PAGE_SIZE, "FM driver registers dump.\n");
-+
-+	if (!p_wrp_fm_dev->active || !p_wrp_fm_dev->h_Dev)
-+		return -EIO;
-+	else
-+		n = fm_dump_regs(p_wrp_fm_dev->h_Dev, buf, n);
-+
-+	local_irq_restore(flags);
-+#else
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+			"Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+	return n;
-+}
-+
-+static ssize_t show_fm_kg_pe_regs(struct device *dev,
-+				struct device_attribute *attr,
-+				char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+#endif
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	local_irq_save(flags);
-+
-+	n = snprintf(buf, PAGE_SIZE,
-+			"\n FM-KG Port Partition Config registers dump.\n");
-+
-+	if (!p_wrp_fm_dev->active || !p_wrp_fm_dev->h_PcdDev)
-+		return -EIO;
-+	else
-+		n = fm_kg_pe_dump_regs(p_wrp_fm_dev->h_PcdDev, buf, n);
-+
-+	local_irq_restore(flags);
-+#else
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+			"Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+	return n;
-+}
-+
-+static ssize_t show_fm_kg_regs(struct device *dev,
-+				struct device_attribute *attr,
-+				char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+#endif
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	local_irq_save(flags);
-+
-+	n = snprintf(buf, PAGE_SIZE, "FM-KG registers dump.\n");
-+
-+	if (!p_wrp_fm_dev->active || !p_wrp_fm_dev->h_PcdDev)
-+		return -EIO;
-+	else
-+		n = fm_kg_dump_regs(p_wrp_fm_dev->h_PcdDev, buf, n);
-+
-+	local_irq_restore(flags);
-+#else
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+			"Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+	return n;
-+}
-+
-+
-+static ssize_t show_fm_fpm_regs(struct device *dev,
-+				struct device_attribute *attr,
-+				char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+#endif
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	local_irq_save(flags);
-+
-+	n = snprintf(buf, PAGE_SIZE, "FM-FPM registers dump.\n");
-+
-+	if (!p_wrp_fm_dev->active || !p_wrp_fm_dev->h_Dev)
-+		return -EIO;
-+	else
-+		n = fm_fpm_dump_regs(p_wrp_fm_dev->h_Dev, buf, n);
-+
-+	local_irq_restore(flags);
-+#else
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+			"Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+	return n;
-+}
-+
-+static ssize_t show_prs_regs(struct device *dev,
-+			     struct device_attribute *attr, char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+#endif
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE, "FM Policer registers dump.\n");
-+
-+	if (!p_wrp_fm_dev->active || !p_wrp_fm_dev->h_PcdDev)
-+		return -EIO;
-+	else
-+		n = fm_prs_dump_regs(p_wrp_fm_dev->h_PcdDev, buf, n);
-+
-+	local_irq_restore(flags);
-+#else
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+		     "Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+	return n;
-+}
-+
-+static ssize_t show_plcr_regs(struct device *dev,
-+				struct device_attribute *attr,
-+				char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+#endif
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return -EINVAL;
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE, "FM Policer registers dump.\n");
-+
-+	if (!p_wrp_fm_dev->active || !p_wrp_fm_dev->h_PcdDev)
-+		return -EIO;
-+	else
-+		n = fm_plcr_dump_regs(p_wrp_fm_dev->h_PcdDev, buf, n);
-+
-+	local_irq_restore(flags);
-+#else
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+			"Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+
-+#endif /* (defined(DEBUG_ERRORS) && ... */
-+
-+	return n;
-+}
-+
-+static DEVICE_ATTR(fm_regs, S_IRUGO, show_fm_regs, NULL);
-+static DEVICE_ATTR(fm_fpm_regs, S_IRUGO, show_fm_fpm_regs, NULL);
-+static DEVICE_ATTR(fm_kg_regs, S_IRUGO, show_fm_kg_regs, NULL);
-+static DEVICE_ATTR(fm_kg_pe_regs, S_IRUGO, show_fm_kg_pe_regs, NULL);
-+static DEVICE_ATTR(fm_plcr_regs, S_IRUGO, show_plcr_regs, NULL);
-+static DEVICE_ATTR(fm_prs_regs, S_IRUGO, show_prs_regs, NULL);
-+static DEVICE_ATTR(fm_muram_free_size, S_IRUGO, show_fm_muram_free_sz, NULL);
-+static DEVICE_ATTR(fm_ctrl_code_ver, S_IRUGO, show_fm_ctrl_code_ver, NULL);
-+
-+int fm_sysfs_create(struct device *dev)
-+{
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+
-+	if (dev == NULL)
-+		return -EIO;
-+
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+
-+	/* store to remove them when module is disabled */
-+	p_wrp_fm_dev->dev_attr_regs = &dev_attr_fm_regs;
-+	p_wrp_fm_dev->dev_attr_risc_load = &dev_attr_fm_risc_load_val;
-+	p_wrp_fm_dev->dev_fm_fpm_attr_regs = &dev_attr_fm_fpm_regs;
-+	p_wrp_fm_dev->dev_fm_kg_attr_regs = &dev_attr_fm_kg_regs;
-+	p_wrp_fm_dev->dev_fm_kg_pe_attr_regs = &dev_attr_fm_kg_pe_regs;
-+	p_wrp_fm_dev->dev_plcr_attr_regs = &dev_attr_fm_plcr_regs;
-+	p_wrp_fm_dev->dev_prs_attr_regs = &dev_attr_fm_prs_regs;
-+	p_wrp_fm_dev->dev_attr_muram_free_size = &dev_attr_fm_muram_free_size;
-+	p_wrp_fm_dev->dev_attr_fm_ctrl_code_ver = &dev_attr_fm_ctrl_code_ver;
-+
-+	/* Create sysfs statistics group for FM module */
-+	if (sysfs_create_group(&dev->kobj, &fm_dev_stats_attr_grp) != 0)
-+		return -EIO;
-+
-+	if (sysfs_create_group(&dev->kobj, &fm_dev_schemes_attr_grp) != 0)
-+		return -EIO;
-+
-+	if (sysfs_create_group(&dev->kobj, &fm_dev_profiles_attr_grp) != 0)
-+		return -EIO;
-+
-+	if (sysfs_create_group(&dev->kobj, &fm_dev_tnums_dbg_attr_grp) != 0)
-+		return -EIO;
-+
-+	if (sysfs_create_group(&dev->kobj, &fm_dev_cls_plans_attr_grp) != 0)
-+		return -EIO;
-+
-+	/* Registers dump entry - in future will be moved to debugfs */
-+	if (device_create_file(dev, &dev_attr_fm_regs) != 0)
-+		return -EIO;
-+
-+	if (device_create_file(dev, &dev_attr_fm_risc_load_val) != 0)
-+		return -EIO;
-+
-+	if (device_create_file(dev, &dev_attr_fm_fpm_regs) != 0)
-+		return -EIO;
-+
-+	if (device_create_file(dev, &dev_attr_fm_kg_regs) != 0)
-+		return -EIO;
-+
-+	if (device_create_file(dev, &dev_attr_fm_kg_pe_regs) != 0)
-+		return -EIO;
-+
-+	if (device_create_file(dev, &dev_attr_fm_plcr_regs) != 0)
-+		return -EIO;
-+
-+	if (device_create_file(dev, &dev_attr_fm_prs_regs) != 0)
-+		return -EIO;
-+
-+	/* muram free size */
-+	if (device_create_file(dev, &dev_attr_fm_muram_free_size) != 0)
-+		return -EIO;
-+
-+	/* fm ctrl code version */
-+	if (device_create_file(dev, &dev_attr_fm_ctrl_code_ver) != 0)
-+		return -EIO;
-+
-+	return 0;
-+}
-+
-+void fm_sysfs_destroy(struct device *dev)
-+{
-+	t_LnxWrpFmDev *p_wrp_fm_dev = NULL;
-+
-+	if (WARN_ON(dev == NULL))
-+		return;
-+
-+	p_wrp_fm_dev = (t_LnxWrpFmDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_wrp_fm_dev == NULL))
-+		return;
-+
-+	sysfs_remove_group(&dev->kobj, &fm_dev_stats_attr_grp);
-+	sysfs_remove_group(&dev->kobj, &fm_dev_schemes_attr_grp);
-+	sysfs_remove_group(&dev->kobj, &fm_dev_profiles_attr_grp);
-+	sysfs_remove_group(&dev->kobj, &fm_dev_cls_plans_attr_grp);
-+	sysfs_remove_group(&dev->kobj, &fm_dev_tnums_dbg_attr_grp);
-+	device_remove_file(dev, p_wrp_fm_dev->dev_attr_regs);
-+	device_remove_file(dev, p_wrp_fm_dev->dev_fm_fpm_attr_regs);
-+	device_remove_file(dev, p_wrp_fm_dev->dev_fm_kg_attr_regs);
-+	device_remove_file(dev, p_wrp_fm_dev->dev_fm_kg_pe_attr_regs);
-+	device_remove_file(dev, p_wrp_fm_dev->dev_plcr_attr_regs);
-+	device_remove_file(dev, p_wrp_fm_dev->dev_prs_attr_regs);
-+	device_remove_file(dev, p_wrp_fm_dev->dev_attr_muram_free_size);
-+	device_remove_file(dev, p_wrp_fm_dev->dev_attr_fm_ctrl_code_ver);
-+}
-+
-+int fm_dump_regs(void *h_fm, char *buf, int nn)
-+{
-+	t_Fm		*p_Fm = (t_Fm *)h_fm;
-+	uint8_t		i = 0;
-+	int		n = nn;
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+
-+	FM_DMP_TITLE(buf, n, p_Fm->p_FmDmaRegs, "FM-DMA Regs");
-+
-+	FM_DMP_V32(buf, n, p_Fm->p_FmDmaRegs, fmdmsr);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmDmaRegs, fmdmemsr);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmDmaRegs, fmdmmr);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmDmaRegs, fmdmtr);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmDmaRegs, fmdmhy);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmDmaRegs, fmdmsetr);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmDmaRegs, fmdmtah);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmDmaRegs, fmdmtal);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmDmaRegs, fmdmtcid);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmDmaRegs, fmdmra);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmDmaRegs, fmdmrd);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmDmaRegs, fmdmwcr);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmDmaRegs, fmdmebcr);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmDmaRegs, fmdmdcr);
-+
-+	FM_DMP_TITLE(buf, n, &p_Fm->p_FmDmaRegs->fmdmplr, "fmdmplr");
-+
-+	for (i = 0; i < FM_MAX_NUM_OF_HW_PORT_IDS / 2 ; ++i)
-+		FM_DMP_MEM_32(buf, n, &p_Fm->p_FmDmaRegs->fmdmplr[i]);
-+
-+	FM_DMP_TITLE(buf, n, p_Fm->p_FmBmiRegs, "FM-BMI COMMON Regs");
-+	FM_DMP_V32(buf, n, p_Fm->p_FmBmiRegs, fmbm_init);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmBmiRegs, fmbm_cfg1);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmBmiRegs, fmbm_cfg2);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmBmiRegs, fmbm_ievr);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmBmiRegs, fmbm_ier);
-+
-+	FM_DMP_TITLE(buf, n, &p_Fm->p_FmBmiRegs->fmbm_arb, "fmbm_arb");
-+	for (i = 0; i < 8 ; ++i)
-+		FM_DMP_MEM_32(buf, n, &p_Fm->p_FmBmiRegs->fmbm_arb[i]);
-+
-+	FM_DMP_TITLE(buf, n, p_Fm->p_FmQmiRegs, "FM-QMI COMMON Regs");
-+	FM_DMP_V32(buf, n, p_Fm->p_FmQmiRegs, fmqm_gc);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmQmiRegs, fmqm_eie);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmQmiRegs, fmqm_eien);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmQmiRegs, fmqm_eif);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmQmiRegs, fmqm_ie);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmQmiRegs, fmqm_ien);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmQmiRegs, fmqm_if);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmQmiRegs, fmqm_gs);
-+	FM_DMP_V32(buf, n, p_Fm->p_FmQmiRegs, fmqm_etfc);
-+
-+	return n;
-+}
-+
-+int fm_dump_tnum_dbg(void *h_fm, int tn_s, int tn_e, char *buf, int nn)
-+{
-+	t_Fm		*p_Fm = (t_Fm *)h_fm;
-+	uint8_t		i, j = 0;
-+	int		n = nn;
-+
-+	FM_DMP_TITLE(buf, n, NULL, "Tnums and Tnum dbg regs %d - %d",
-+			tn_s, tn_e);
-+
-+	iowrite32be(tn_s << 24, &p_Fm->p_FmFpmRegs->fmfp_dra);
-+
-+	mb();
-+
-+	for (j = tn_s; j <= tn_e; j++) {
-+		FM_DMP_LN(buf, n, "> fmfp_ts[%d]\n", j);
-+		FM_DMP_MEM_32(buf, n, &p_Fm->p_FmFpmRegs->fmfp_ts[j]);
-+		FM_DMP_V32(buf, n, p_Fm->p_FmFpmRegs, fmfp_dra);
-+		FM_DMP_LN(buf, n, "> fmfp_drd[0-3]\n");
-+
-+		for (i = 0; i < 4 ; ++i)
-+			FM_DMP_MEM_32(buf, n, &p_Fm->p_FmFpmRegs->fmfp_drd[i]);
-+
-+		FM_DMP_LN(buf, n, "\n");
-+
-+	}
-+
-+	return n;
-+}
-+
-+int fm_dump_cls_plan(void *h_fm_pcd, int cpn, char *buf, int nn)
-+{
-+	t_FmPcd				*p_pcd = (t_FmPcd *)h_fm_pcd;
-+	int				i = 0;
-+	uint32_t			tmp;
-+	unsigned long			i_flg;
-+	int				n = nn;
-+	u_FmPcdKgIndirectAccessRegs	*idac;
-+	spinlock_t			*p_lk;
-+
-+	p_lk = (spinlock_t *)p_pcd->p_FmPcdKg->h_HwSpinlock;
-+	idac = p_pcd->p_FmPcdKg->p_IndirectAccessRegs;
-+
-+	spin_lock_irqsave(p_lk, i_flg);
-+
-+	/* Read ClsPlan Block Action Regs */
-+	tmp =  (uint32_t)(FM_KG_KGAR_GO |
-+		FM_KG_KGAR_READ |
-+		FM_PCD_KG_KGAR_SEL_CLS_PLAN_ENTRY |
-+		DUMMY_PORT_ID |
-+		((uint32_t)cpn << FM_PCD_KG_KGAR_NUM_SHIFT) |
-+		FM_PCD_KG_KGAR_WSEL_MASK);
-+
-+	if (fman_kg_write_ar_wait(p_pcd->p_FmPcdKg->p_FmPcdKgRegs, tmp)) {
-+		FM_DMP_LN(buf, nn, "Keygen scheme access violation");
-+		spin_unlock_irqrestore(p_lk, i_flg);
-+		return nn;
-+	}
-+	FM_DMP_TITLE(buf, n, &idac->clsPlanRegs,
-+			"ClsPlan %d Indirect Access Regs", cpn);
-+
-+	for (i = 0; i < 8; i++)
-+		FM_DMP_MEM_32(buf, n, &idac->clsPlanRegs.kgcpe[i]);
-+
-+	spin_unlock_irqrestore(p_lk, i_flg);
-+
-+	return n;
-+}
-+
-+int fm_profile_dump_regs(void *h_fm_pcd, int ppn, char *buf, int nn)
-+{
-+	t_FmPcd				*p_pcd = (t_FmPcd *)h_fm_pcd;
-+	t_FmPcdPlcrProfileRegs		*p_prof_regs;
-+	t_FmPcdPlcrRegs			*p_plcr_regs;
-+	t_FmPcdPlcr			*p_plcr;
-+	uint32_t			tmp;
-+	unsigned long			i_flg;
-+	int				n = nn;
-+	int				toc = 10;
-+	spinlock_t			*p_lk;
-+
-+	p_plcr = p_pcd->p_FmPcdPlcr;
-+	p_prof_regs = &p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->profileRegs;
-+	p_plcr_regs = p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs;
-+
-+	p_lk = (spinlock_t *)((t_FmPcdPlcr *)p_plcr)->h_HwSpinlock;
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+	FM_DMP_TITLE(buf, n, p_plcr_regs, "FM-PCD policer-profile regs");
-+
-+	tmp =  (uint32_t)(FM_PCD_PLCR_PAR_GO |
-+			FM_PCD_PLCR_PAR_R |
-+			((uint32_t)ppn << FM_PCD_PLCR_PAR_PNUM_SHIFT) |
-+			FM_PCD_PLCR_PAR_PWSEL_MASK);
-+
-+	spin_lock_irqsave(p_lk, i_flg);
-+
-+	iowrite32be(tmp, &p_plcr_regs->fmpl_par);
-+
-+	mb();
-+
-+	/* wait for the porfile regs to be present */
-+	do {
-+		--toc;
-+		udelay(10);
-+		if (!toc) {
-+			/* looks like PLCR_PAR_GO refuses to clear */
-+			spin_unlock_irqrestore(p_lk, i_flg);
-+			FM_DMP_LN(buf, n, "Profile regs not accessible -");
-+			FM_DMP_LN(buf, n, " check profile init process\n");
-+			return n;
-+		}
-+	} while ((ioread32be(&p_plcr_regs->fmpl_par) & FM_PCD_PLCR_PAR_GO));
-+
-+	FM_DMP_TITLE(buf, n, p_prof_regs, "Profile %d regs", ppn);
-+
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_pemode);
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_pegnia);
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_peynia);
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_pernia);
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_pecir);
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_pecbs);
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_pepepir_eir);
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_pepbs_ebs);
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_pelts);
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_pects);
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_pepts_ets);
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_pegpc);
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_peypc);
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_perpc);
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_perypc);
-+	FM_DMP_V32(buf, n, p_prof_regs, fmpl_perrpc);
-+
-+	spin_unlock_irqrestore(p_lk, i_flg);
-+
-+	return n;
-+}
-+
-+int fm_dump_scheme(void *h_fm_pcd, int scnum, char *buf, int nn)
-+{
-+	t_FmPcd				*p_pcd = (t_FmPcd *)h_fm_pcd;
-+	uint32_t			tmp_ar;
-+	unsigned long			i_flg;
-+	int				i, n = nn;
-+	spinlock_t			*p_lk;
-+	u_FmPcdKgIndirectAccessRegs	*idac;
-+
-+	idac = p_pcd->p_FmPcdKg->p_IndirectAccessRegs;
-+	p_lk = (spinlock_t *)p_pcd->p_FmPcdKg->h_HwSpinlock;
-+
-+	spin_lock_irqsave(p_lk, i_flg);
-+
-+	tmp_ar = FmPcdKgBuildReadSchemeActionReg((uint8_t)scnum);
-+	if (fman_kg_write_ar_wait(p_pcd->p_FmPcdKg->p_FmPcdKgRegs, tmp_ar)) {
-+		FM_DMP_LN(buf, nn,
-+			"Keygen scheme access violation or no such scheme");
-+		spin_unlock_irqrestore(p_lk, i_flg);
-+		return nn;
-+	}
-+
-+	FM_DMP_TITLE(buf, n, &idac->schemeRegs,
-+			"Scheme %d Indirect Access Regs", scnum);
-+
-+	FM_DMP_V32(buf, n, &idac->schemeRegs, kgse_mode);
-+	FM_DMP_V32(buf, n, &idac->schemeRegs, kgse_ekfc);
-+	FM_DMP_V32(buf, n, &idac->schemeRegs, kgse_ekdv);
-+	FM_DMP_V32(buf, n, &idac->schemeRegs, kgse_bmch);
-+	FM_DMP_V32(buf, n, &idac->schemeRegs, kgse_bmcl);
-+	FM_DMP_V32(buf, n, &idac->schemeRegs, kgse_fqb);
-+	FM_DMP_V32(buf, n, &idac->schemeRegs, kgse_hc);
-+	FM_DMP_V32(buf, n, &idac->schemeRegs, kgse_ppc);
-+
-+	FM_DMP_TITLE(buf, n, &idac->schemeRegs.kgse_gec, "kgse_gec");
-+
-+	for (i = 0; i < FM_KG_NUM_OF_GENERIC_REGS; i++)
-+		FM_DMP_MEM_32(buf, n, &idac->schemeRegs.kgse_gec[i]);
-+
-+	FM_DMP_V32(buf, n, &idac->schemeRegs, kgse_spc);
-+	FM_DMP_V32(buf, n, &idac->schemeRegs, kgse_dv0);
-+	FM_DMP_V32(buf, n, &idac->schemeRegs, kgse_dv1);
-+	FM_DMP_V32(buf, n, &idac->schemeRegs, kgse_ccbs);
-+	FM_DMP_V32(buf, n, &idac->schemeRegs, kgse_mv);
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+
-+	spin_unlock_irqrestore(p_lk, i_flg);
-+
-+	return n;
-+}
-+
-+int fm_kg_pe_dump_regs(void *h_fm_pcd, char *buf, int nn)
-+{
-+	t_FmPcd				*p_pcd = (t_FmPcd *)h_fm_pcd;
-+	int				i = 0;
-+	uint8_t				prt_id = 0;
-+	uint32_t			tmp_ar;
-+	unsigned long			i_flg;
-+	int				n = nn;
-+	u_FmPcdKgIndirectAccessRegs	*idac;
-+	t_FmPcdKg			*p_kg;
-+	spinlock_t			*p_lk;
-+
-+	p_kg = p_pcd->p_FmPcdKg;
-+	idac = p_pcd->p_FmPcdKg->p_IndirectAccessRegs;
-+	p_lk = (spinlock_t *)p_kg->h_HwSpinlock;
-+
-+	spin_lock_irqsave(p_lk, i_flg);
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+
-+	for (i = 0; i < FM_MAX_NUM_OF_PORTS; i++) {
-+		SW_PORT_INDX_TO_HW_PORT_ID(prt_id, i);
-+
-+		tmp_ar = FmPcdKgBuildReadPortSchemeBindActionReg(prt_id);
-+
-+		if (fman_kg_write_ar_wait(p_kg->p_FmPcdKgRegs, tmp_ar)) {
-+			FM_DMP_LN(buf, nn, "Keygen scheme access violation");
-+			spin_unlock_irqrestore(p_lk, i_flg);
-+			return nn;
-+		}
-+		FM_DMP_TITLE(buf, n, &idac->portRegs, "Port %d regs", prt_id);
-+		FM_DMP_V32(buf, n, &idac->portRegs, fmkg_pe_sp);
-+		FM_DMP_V32(buf, n, &idac->portRegs, fmkg_pe_cpp);
-+	}
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+
-+	spin_unlock_irqrestore(p_lk, i_flg);
-+
-+	return n;
-+}
-+
-+int fm_kg_dump_regs(void *h_fm_pcd, char *buf, int nn)
-+{
-+	t_FmPcd		*p_pcd = (t_FmPcd *)h_fm_pcd;
-+	int			n = nn;
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+	FM_DMP_TITLE(buf, n, p_pcd->p_FmPcdKg->p_FmPcdKgRegs,
-+			"FmPcdKgRegs Regs");
-+
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdKg->p_FmPcdKgRegs, fmkg_gcr);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdKg->p_FmPcdKgRegs, fmkg_eer);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdKg->p_FmPcdKgRegs, fmkg_eeer);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdKg->p_FmPcdKgRegs, fmkg_seer);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdKg->p_FmPcdKgRegs, fmkg_seeer);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdKg->p_FmPcdKgRegs, fmkg_gsr);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdKg->p_FmPcdKgRegs, fmkg_tpc);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdKg->p_FmPcdKgRegs, fmkg_serc);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdKg->p_FmPcdKgRegs, fmkg_fdor);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdKg->p_FmPcdKgRegs, fmkg_gdv0r);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdKg->p_FmPcdKgRegs, fmkg_gdv1r);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdKg->p_FmPcdKgRegs, fmkg_feer);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdKg->p_FmPcdKgRegs, fmkg_ar);
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+
-+	return n;
-+}
-+
-+
-+int fm_fpm_dump_regs(void *h_fm, char *buf, int nn)
-+{
-+	t_Fm		*p_fm = (t_Fm *)h_fm;
-+	uint8_t		i;
-+	int		n = nn;
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+
-+	FM_DMP_TITLE(buf, n, p_fm->p_FmFpmRegs, "FM-FPM Regs");
-+
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fmfp_tnc);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fmfp_prc);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fmfp_brkc);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fmfp_mxd);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fmfp_dist1);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fmfp_dist2);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fm_epi);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fm_rie);
-+
-+	FM_DMP_TITLE(buf, n, &p_fm->p_FmFpmRegs->fmfp_fcev, "fmfp_fcev");
-+	for (i = 0; i < 4; ++i)
-+		FM_DMP_MEM_32(buf, n, &p_fm->p_FmFpmRegs->fmfp_fcev[i]);
-+
-+	FM_DMP_TITLE(buf, n, &p_fm->p_FmFpmRegs->fmfp_cee, "fmfp_cee");
-+	for (i = 0; i < 4; ++i)
-+		FM_DMP_MEM_32(buf, n, &p_fm->p_FmFpmRegs->fmfp_cee[i]);
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fmfp_tsc1);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fmfp_tsc2);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fmfp_tsp);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fmfp_tsf);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fm_rcr);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fmfp_extc);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fmfp_ext1);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fmfp_ext2);
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fm_ip_rev_1);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fm_ip_rev_2);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fm_rstc);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fm_cld);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fm_npi);
-+	FM_DMP_V32(buf, n, p_fm->p_FmFpmRegs, fmfp_ee);
-+
-+	FM_DMP_TITLE(buf, n, &p_fm->p_FmFpmRegs->fmfp_cev, "fmfp_cev");
-+	for (i = 0; i < 4; ++i)
-+		FM_DMP_MEM_32(buf, n, &p_fm->p_FmFpmRegs->fmfp_cev[i]);
-+
-+	FM_DMP_TITLE(buf, n, &p_fm->p_FmFpmRegs->fmfp_ps, "fmfp_ps");
-+	for (i = 0; i < 64; ++i)
-+		FM_DMP_MEM_32(buf, n, &p_fm->p_FmFpmRegs->fmfp_ps[i]);
-+
-+	return n;
-+}
-+
-+int fm_prs_dump_regs(void *h_fm_pcd, char *buf, int nn)
-+{
-+	t_FmPcd		*p_pcd = (t_FmPcd *)h_fm_pcd;
-+	int		n = nn;
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+
-+	FM_DMP_TITLE(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs,
-+			"FM-PCD parser regs");
-+
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_rpclim);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_rpimac);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, pmeec);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_pevr);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_pever);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_perr);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_perer);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_ppsc);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_pds);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_l2rrs);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_l3rrs);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_l4rrs);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_srrs);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_l2rres);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_l3rres);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_l4rres);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_srres);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_spcs);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_spscs);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_hxscs);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_mrcs);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_mwcs);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_mrscs);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_mwscs);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPrs->p_FmPcdPrsRegs, fmpr_fcscs);
-+
-+	return n;
-+}
-+
-+int fm_plcr_dump_regs(void *h_fm_pcd, char *buf, int nn)
-+{
-+	t_FmPcd		*p_pcd = (t_FmPcd *)h_fm_pcd;
-+	int		i = 0;
-+	int		n = nn;
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+
-+	FM_DMP_TITLE(buf, n,
-+			p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs,
-+			"FM policer regs");
-+
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_gcr);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_gsr);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_evr);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_ier);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_ifr);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_eevr);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_eier);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_eifr);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_rpcnt);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_ypcnt);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_rrpcnt);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_rypcnt);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_tpcnt);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_flmcnt);
-+
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_serc);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_upcr);
-+	FM_DMP_V32(buf, n, p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs, fmpl_dpmr);
-+
-+	FM_DMP_TITLE(buf, n,
-+			&p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_pmr,
-+			"fmpl_pmr");
-+
-+	for (i = 0; i < 63; ++i)
-+		FM_DMP_MEM_32(buf, n,
-+			&p_pcd->p_FmPcdPlcr->p_FmPcdPlcrRegs->fmpl_pmr[i]);
-+
-+	return n;
-+}
-+
-+int fm_get_counter(void *h_fm, e_FmCounters cnt_e, uint32_t *cnt_val)
-+{
-+	t_Fm		*p_fm = (t_Fm *)h_fm;
-+
-+	/* When applicable (when there is an "enable counters" bit),
-+	check that counters are enabled */
-+
-+	switch (cnt_e) {
-+	case (e_FM_COUNTERS_DEQ_1):
-+	case (e_FM_COUNTERS_DEQ_2):
-+	case (e_FM_COUNTERS_DEQ_3):
-+		if (p_fm->p_FmStateStruct->revInfo.majorRev >= 6)
-+			return -EINVAL; /* counter not available */
-+
-+	case (e_FM_COUNTERS_ENQ_TOTAL_FRAME):
-+	case (e_FM_COUNTERS_DEQ_TOTAL_FRAME):
-+	case (e_FM_COUNTERS_DEQ_0):
-+	case (e_FM_COUNTERS_DEQ_FROM_DEFAULT):
-+	case (e_FM_COUNTERS_DEQ_FROM_CONTEXT):
-+	case (e_FM_COUNTERS_DEQ_FROM_FD):
-+	case (e_FM_COUNTERS_DEQ_CONFIRM):
-+		if (!(ioread32be(&p_fm->p_FmQmiRegs->fmqm_gc) &
-+			QMI_CFG_EN_COUNTERS))
-+			return -EINVAL; /* Requested counter not available */
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	switch (cnt_e) {
-+	case (e_FM_COUNTERS_ENQ_TOTAL_FRAME):
-+		*cnt_val = ioread32be(&p_fm->p_FmQmiRegs->fmqm_etfc);
-+		return 0;
-+	case (e_FM_COUNTERS_DEQ_TOTAL_FRAME):
-+		*cnt_val =  ioread32be(&p_fm->p_FmQmiRegs->fmqm_dtfc);
-+		return 0;
-+	case (e_FM_COUNTERS_DEQ_0):
-+		*cnt_val =  ioread32be(&p_fm->p_FmQmiRegs->fmqm_dc0);
-+		return 0;
-+	case (e_FM_COUNTERS_DEQ_1):
-+		*cnt_val =  ioread32be(&p_fm->p_FmQmiRegs->fmqm_dc1);
-+		return 0;
-+	case (e_FM_COUNTERS_DEQ_2):
-+		*cnt_val =  ioread32be(&p_fm->p_FmQmiRegs->fmqm_dc2);
-+		return 0;
-+	case (e_FM_COUNTERS_DEQ_3):
-+		*cnt_val =  ioread32be(&p_fm->p_FmQmiRegs->fmqm_dc3);
-+		return 0;
-+	case (e_FM_COUNTERS_DEQ_FROM_DEFAULT):
-+		*cnt_val =  ioread32be(&p_fm->p_FmQmiRegs->fmqm_dfdc);
-+		return 0;
-+	case (e_FM_COUNTERS_DEQ_FROM_CONTEXT):
-+		*cnt_val =  ioread32be(&p_fm->p_FmQmiRegs->fmqm_dfcc);
-+		return 0;
-+	case (e_FM_COUNTERS_DEQ_FROM_FD):
-+		*cnt_val =  ioread32be(&p_fm->p_FmQmiRegs->fmqm_dffc);
-+		return 0;
-+	case (e_FM_COUNTERS_DEQ_CONFIRM):
-+		*cnt_val =  ioread32be(&p_fm->p_FmQmiRegs->fmqm_dcc);
-+		return 0;
-+	}
-+	/* should never get here */
-+	return -EINVAL; /* counter not available */
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs_fm.h
-@@ -0,0 +1,136 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#ifndef LNXWRP_SYSFS_FM_H_
-+#define LNXWRP_SYSFS_FM_H_
-+
-+#include "lnxwrp_sysfs.h"
-+
-+int fm_sysfs_create(struct device *dev);
-+void fm_sysfs_destroy(struct device *dev);
-+int fm_dump_regs(void *h_dev, char *buf, int nn);
-+int fm_fpm_dump_regs(void *h_dev, char *buf, int nn);
-+int fm_kg_dump_regs(void *h_pcd, char *buf, int nn);
-+int fm_kg_pe_dump_regs(void *h_pcd, char *buf, int nn);
-+int fm_dump_scheme(void *h_pcd, int scnum, char *buf, int nn);
-+int fm_dump_tnum_dbg(void *h_fm, int tn_s, int tn_e, char *buf, int nn);
-+int fm_dump_cls_plan(void *h_pcd, int cpn, char *buf, int nn);
-+int fm_plcr_dump_regs(void *h_pcd, char *buf, int nn);
-+int fm_prs_dump_regs(void *h_pcd, char *buf, int nn);
-+int fm_profile_dump_regs(void *h_pcd, int ppnum, char *buf, int nn);
-+
-+#define FM_DMP_PGSZ_ERR { \
-+			snprintf(&buf[PAGE_SIZE - 80], 70, \
-+			"\n Err: current sysfs buffer reached PAGE_SIZE\n");\
-+			n = PAGE_SIZE - 2; \
-+			}
-+
-+#define FM_DMP_LN(buf, n, ...) \
-+	do { \
-+		int k, m = n; \
-+		m += k = snprintf(&buf[m], PAGE_SIZE - m, __VA_ARGS__); \
-+		if (k < 0 || m > PAGE_SIZE - 90) \
-+			FM_DMP_PGSZ_ERR \
-+		n = m; \
-+	} while (0)
-+
-+#define FM_DMP_TITLE(buf, n, addr, ...) \
-+	do { \
-+		int k, m = n; \
-+		m += k = snprintf(&buf[m], PAGE_SIZE - m, "\n"); \
-+		if (k < 0 || m > PAGE_SIZE - 90) \
-+			FM_DMP_PGSZ_ERR \
-+		m += k = snprintf(&buf[m], PAGE_SIZE - m, __VA_ARGS__); \
-+		if (k < 0 || m > PAGE_SIZE - 90) \
-+			FM_DMP_PGSZ_ERR \
-+		if (addr) {                           \
-+			phys_addr_t pa; \
-+			pa = virt_to_phys(addr); \
-+			m += k = \
-+			snprintf(&buf[m], PAGE_SIZE - m, " (0x%lX)", \
-+				(long unsigned int)(pa)); \
-+			if (k < 0 || m > PAGE_SIZE - 90) \
-+				FM_DMP_PGSZ_ERR \
-+		} \
-+		m += k = snprintf(&buf[m], PAGE_SIZE - m, \
-+			"\n----------------------------------------\n\n"); \
-+			if (k < 0 || m > PAGE_SIZE - 90) \
-+				FM_DMP_PGSZ_ERR \
-+		n = m; \
-+	} while (0)
-+
-+#define FM_DMP_SUBTITLE(buf, n, ...) \
-+	do { \
-+		int k, m = n; \
-+		m += k = snprintf(&buf[m], PAGE_SIZE - m, "------- "); \
-+		if (k < 0 || m > PAGE_SIZE - 90) \
-+			FM_DMP_PGSZ_ERR \
-+		m += k = snprintf(&buf[m], PAGE_SIZE - m, __VA_ARGS__); \
-+		if (k < 0 || m > PAGE_SIZE - 90) \
-+			FM_DMP_PGSZ_ERR \
-+		m += k = snprintf(&buf[m], PAGE_SIZE - m, "\n"); \
-+		if (k < 0 || m > PAGE_SIZE - 90) \
-+			FM_DMP_PGSZ_ERR \
-+		n = m; \
-+	} while (0)
-+
-+#define FM_DMP_MEM_32(buf, n, addr) \
-+	{ \
-+		uint32_t val; \
-+		phys_addr_t pa; \
-+		int k, m = n; \
-+		pa = virt_to_phys(addr); \
-+		val = ioread32be((addr)); \
-+		do { \
-+			m += k = snprintf(&buf[m], \
-+				PAGE_SIZE - m, "0x%010llX: 0x%08x\n", \
-+				pa, val); \
-+			if (k < 0 || m > PAGE_SIZE - 90) \
-+				FM_DMP_PGSZ_ERR \
-+			n += k; \
-+		} while (0) ;\
-+	}
-+
-+#define FM_DMP_V32(buf, n, st, phrase) \
-+	do { \
-+		int k, m = n; \
-+		phys_addr_t pa = virt_to_phys(&((st)->phrase)); \
-+		k = snprintf(&buf[m], PAGE_SIZE - m, \
-+		"0x%010llX: 0x%08x%8s\t%s\n", (unsigned long long) pa, \
-+		ioread32be((uint32_t *)&((st)->phrase)), "", #phrase); \
-+		if (k < 0 || m > PAGE_SIZE - 90) \
-+			FM_DMP_PGSZ_ERR \
-+		n += k; \
-+	} while (0)
-+
-+#endif /* LNXWRP_SYSFS_FM_H_ */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs_fm_port.c
-@@ -0,0 +1,1268 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include "lnxwrp_sysfs.h"
-+#include "lnxwrp_fm.h"
-+#include "debug_ext.h"
-+#include "lnxwrp_sysfs_fm_port.h"
-+#include "lnxwrp_sysfs_fm.h"
-+
-+#include "../../sdk_fman/Peripherals/FM/Port/fm_port.h"
-+#include "../../sdk_fman/Peripherals/FM/Port/fm_port_dsar.h"
-+
-+#if defined(__ERR_MODULE__)
-+#undef __ERR_MODULE__
-+#endif
-+
-+#include "../../sdk_fman/Peripherals/FM/fm.h"
-+
-+static const struct sysfs_stats_t portSysfsStats[] = {
-+	/* RX/TX/OH common statistics */
-+	{
-+	 .stat_name = "port_frame",
-+	 .stat_counter = e_FM_PORT_COUNTERS_FRAME,
-+	 },
-+	{
-+	 .stat_name = "port_discard_frame",
-+	 .stat_counter = e_FM_PORT_COUNTERS_DISCARD_FRAME,
-+	 },
-+	{
-+	 .stat_name = "port_dealloc_buf",
-+	 .stat_counter = e_FM_PORT_COUNTERS_DEALLOC_BUF,
-+	 },
-+	{
-+	 .stat_name = "port_enq_total",
-+	 .stat_counter = e_FM_PORT_COUNTERS_ENQ_TOTAL,
-+	 },
-+	/* TX/OH */
-+	{
-+	 .stat_name = "port_length_err",
-+	 .stat_counter = e_FM_PORT_COUNTERS_LENGTH_ERR,
-+	 },
-+	{
-+	 .stat_name = "port_unsupprted_format",
-+	 .stat_counter = e_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT,
-+	 },
-+	{
-+	 .stat_name = "port_deq_total",
-+	 .stat_counter = e_FM_PORT_COUNTERS_DEQ_TOTAL,
-+	 },
-+	{
-+	 .stat_name = "port_deq_from_default",
-+	 .stat_counter = e_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT,
-+	 },
-+	{
-+	 .stat_name = "port_deq_confirm",
-+	 .stat_counter = e_FM_PORT_COUNTERS_DEQ_CONFIRM,
-+	 },
-+	/* RX/OH */
-+	{
-+	 .stat_name = "port_rx_bad_frame",
-+	 .stat_counter = e_FM_PORT_COUNTERS_RX_BAD_FRAME,
-+	 },
-+	{
-+	 .stat_name = "port_rx_large_frame",
-+	 .stat_counter = e_FM_PORT_COUNTERS_RX_LARGE_FRAME,
-+	 },
-+	{
-+	 .stat_name = "port_rx_out_of_buffers_discard",
-+	 .stat_counter = e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD,
-+	 },
-+	{
-+	 .stat_name = "port_rx_filter_frame",
-+	 .stat_counter = e_FM_PORT_COUNTERS_RX_FILTER_FRAME,
-+	 },
-+	/* TODO: Particular statistics for OH ports */
-+	{}
-+};
-+
-+static ssize_t show_fm_port_stats(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev;
-+	t_LnxWrpFmDev *p_LnxWrpFmDev;
-+	unsigned long flags;
-+	int n = 0;
-+	uint8_t counter = 0;
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+	p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_LnxWrpFmPortDev == NULL))
-+		return -EINVAL;
-+
-+	p_LnxWrpFmDev = (t_LnxWrpFmDev *) p_LnxWrpFmPortDev->h_LnxWrpFmDev;
-+	if (WARN_ON(p_LnxWrpFmDev == NULL))
-+		return -EINVAL;
-+
-+	if (!p_LnxWrpFmDev->active || !p_LnxWrpFmDev->h_Dev)
-+		return -EIO;
-+
-+	if (!p_LnxWrpFmPortDev->h_Dev) {
-+		n = snprintf(buf, PAGE_SIZE, "\tFM Port not configured...\n");
-+		return n;
-+	}
-+
-+	counter = fm_find_statistic_counter_by_name(
-+			attr->attr.name,
-+			portSysfsStats, NULL);
-+
-+	if (counter == e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR) {
-+		uint32_t fmRev = 0;
-+		fmRev = 0xffff &
-+			ioread32(UINT_TO_PTR(p_LnxWrpFmDev->fmBaseAddr +
-+			0x000c30c4));
-+
-+		if (fmRev == 0x0100) {
-+			local_irq_save(flags);
-+			n = snprintf(buf, PAGE_SIZE,
-+				"counter not available for revision 1\n");
-+			local_irq_restore(flags);
-+		}
-+		return n;
-+	}
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE, "\t%s counter: %u\n",
-+		p_LnxWrpFmPortDev->name,
-+		FM_PORT_GetCounter(p_LnxWrpFmPortDev->h_Dev,
-+					(e_FmPortCounters) counter));
-+	local_irq_restore(flags);
-+
-+	return n;
-+}
-+
-+/* FM PORT RX/TX/OH statistics */
-+static DEVICE_ATTR(port_frame, S_IRUGO, show_fm_port_stats, NULL);
-+static DEVICE_ATTR(port_discard_frame, S_IRUGO, show_fm_port_stats, NULL);
-+static DEVICE_ATTR(port_dealloc_buf, S_IRUGO, show_fm_port_stats, NULL);
-+static DEVICE_ATTR(port_enq_total, S_IRUGO, show_fm_port_stats, NULL);
-+/* FM PORT TX/OH statistics */
-+static DEVICE_ATTR(port_length_err, S_IRUGO, show_fm_port_stats, NULL);
-+static DEVICE_ATTR(port_unsupprted_format, S_IRUGO, show_fm_port_stats, NULL);
-+static DEVICE_ATTR(port_deq_total, S_IRUGO, show_fm_port_stats, NULL);
-+static DEVICE_ATTR(port_deq_from_default, S_IRUGO, show_fm_port_stats, NULL);
-+static DEVICE_ATTR(port_deq_confirm, S_IRUGO, show_fm_port_stats, NULL);
-+/* FM PORT RX/OH statistics */
-+static DEVICE_ATTR(port_rx_bad_frame, S_IRUGO, show_fm_port_stats, NULL);
-+static DEVICE_ATTR(port_rx_large_frame, S_IRUGO, show_fm_port_stats, NULL);
-+static DEVICE_ATTR(port_rx_out_of_buffers_discard, S_IRUGO,
-+		show_fm_port_stats, NULL);
-+static DEVICE_ATTR(port_rx_filter_frame, S_IRUGO, show_fm_port_stats, NULL);
-+
-+/* FM PORT TX statistics */
-+static struct attribute *fm_tx_port_dev_stats_attributes[] = {
-+	&dev_attr_port_frame.attr,
-+	&dev_attr_port_discard_frame.attr,
-+	&dev_attr_port_dealloc_buf.attr,
-+	&dev_attr_port_enq_total.attr,
-+	&dev_attr_port_length_err.attr,
-+	&dev_attr_port_unsupprted_format.attr,
-+	&dev_attr_port_deq_total.attr,
-+	&dev_attr_port_deq_from_default.attr,
-+	&dev_attr_port_deq_confirm.attr,
-+	NULL
-+};
-+
-+static const struct attribute_group fm_tx_port_dev_stats_attr_grp = {
-+	.name = "statistics",
-+	.attrs = fm_tx_port_dev_stats_attributes
-+};
-+
-+/* FM PORT RX statistics */
-+static struct attribute *fm_rx_port_dev_stats_attributes[] = {
-+	&dev_attr_port_frame.attr,
-+	&dev_attr_port_discard_frame.attr,
-+	&dev_attr_port_dealloc_buf.attr,
-+	&dev_attr_port_enq_total.attr,
-+	&dev_attr_port_rx_bad_frame.attr,
-+	&dev_attr_port_rx_large_frame.attr,
-+	&dev_attr_port_rx_out_of_buffers_discard.attr,
-+	&dev_attr_port_rx_filter_frame.attr,
-+	NULL
-+};
-+
-+static const struct attribute_group fm_rx_port_dev_stats_attr_grp = {
-+	.name = "statistics",
-+	.attrs = fm_rx_port_dev_stats_attributes
-+};
-+
-+/* TODO: add particular OH ports statistics */
-+static struct attribute *fm_oh_port_dev_stats_attributes[] = {
-+	&dev_attr_port_frame.attr,
-+	&dev_attr_port_discard_frame.attr,
-+	&dev_attr_port_dealloc_buf.attr,
-+	&dev_attr_port_enq_total.attr,
-+	/*TX*/ &dev_attr_port_length_err.attr,
-+	&dev_attr_port_unsupprted_format.attr,
-+	&dev_attr_port_deq_total.attr,
-+	&dev_attr_port_deq_from_default.attr,
-+	&dev_attr_port_deq_confirm.attr,
-+	/* &dev_attr_port_rx_bad_frame.attr, */
-+	/* &dev_attr_port_rx_large_frame.attr, */
-+	&dev_attr_port_rx_out_of_buffers_discard.attr,
-+	/*&dev_attr_port_rx_filter_frame.attr, */
-+	NULL
-+};
-+
-+static const struct attribute_group fm_oh_port_dev_stats_attr_grp = {
-+	.name = "statistics",
-+	.attrs = fm_oh_port_dev_stats_attributes
-+};
-+
-+static ssize_t show_fm_port_regs(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev;
-+#endif
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	p_LnxWrpFmPortDev =
-+		(t_LnxWrpFmPortDev *) dev_get_drvdata(dev);
-+
-+
-+	local_irq_save(flags);
-+
-+	if (!p_LnxWrpFmPortDev->h_Dev) {
-+		n = snprintf(buf, PAGE_SIZE, "\tFM Port not configured...\n");
-+		return n;
-+	} else {
-+		n = snprintf(buf, PAGE_SIZE,
-+				"FM port driver registers dump.\n");
-+		n = fm_port_dump_regs(p_LnxWrpFmPortDev->h_Dev, buf, n);
-+	}
-+
-+	local_irq_restore(flags);
-+
-+	return n;
-+#else
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+			"Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+
-+	return n;
-+#endif
-+}
-+static int fm_port_dsar_dump_mem(void *h_dev, char *buf, int nn)
-+{
-+	t_FmPort *p_FmPort;
-+	t_Fm *p_Fm;
-+	uint8_t hardwarePortId;
-+	uint32_t *param_page;
-+	t_ArCommonDesc *ArCommonDescPtr;
-+	uint32_t *mem;
-+	int i, n = nn;
-+
-+	p_FmPort = (t_FmPort *)h_dev;
-+	hardwarePortId = p_FmPort->hardwarePortId;
-+	p_Fm = (t_Fm *)p_FmPort->h_Fm;
-+
-+	if (!FM_PORT_IsInDsar(p_FmPort))
-+	{
-+		FM_DMP_LN(buf, n, "port %u is not a DSAR port\n",
-+			hardwarePortId);
-+		return n;
-+	}
-+	FM_DMP_LN(buf, n, "port %u DSAR mem\n", hardwarePortId);
-+	FM_DMP_LN(buf, n, "========================\n");
-+
-+	/* do I need request_mem_region here? */
-+	param_page = ioremap(p_FmPort->fmMuramPhysBaseAddr + ioread32be(&p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rgpr), 4);
-+	ArCommonDescPtr = (t_ArCommonDesc*)(ioremap(p_FmPort->fmMuramPhysBaseAddr + ioread32be(param_page), 300*4)); /* this should be changed*/
-+	mem = (uint32_t*)ArCommonDescPtr;
-+	for (i = 0; i < 300; i+=4)
-+		FM_DMP_LN(buf, n, "%08x: %08x %08x %08x %08x\n", i*4, mem[i], mem[i + 1], mem[i + 2], mem[i + 3]);
-+	iounmap(ArCommonDescPtr);
-+	iounmap(param_page);
-+	return n;
-+}
-+
-+static int fm_port_dsar_dump_regs(void *h_dev, char *buf, int nn)
-+{
-+	t_FmPort *p_FmPort;
-+	t_Fm *p_Fm;
-+	uint8_t hardwarePortId;
-+	uint32_t *param_page;
-+	t_ArCommonDesc *ArCommonDescPtr;
-+	int i, n = nn;
-+
-+	p_FmPort = (t_FmPort *)h_dev;
-+	hardwarePortId = p_FmPort->hardwarePortId;
-+	p_Fm = (t_Fm *)p_FmPort->h_Fm;
-+
-+	if (!FM_PORT_IsInDsar(p_FmPort))
-+	{
-+		FM_DMP_LN(buf, n, "port %u is not a DSAR port\n",
-+			hardwarePortId);
-+		return n;
-+	}
-+	FM_DMP_LN(buf, n, "port %u DSAR information\n", hardwarePortId);
-+	FM_DMP_LN(buf, n, "========================\n");
-+
-+	/* do I need request_mem_region here? */
-+	param_page = ioremap(p_FmPort->fmMuramPhysBaseAddr + ioread32be(&p_FmPort->p_FmPortBmiRegs->rxPortBmiRegs.fmbm_rgpr), 4);
-+	ArCommonDescPtr = (t_ArCommonDesc*)(ioremap(p_FmPort->fmMuramPhysBaseAddr + ioread32be(param_page), sizeof(t_ArCommonDesc))); /* this should be changed*/
-+	FM_DMP_LN(buf, n, "Tx port: 0x%x\n", ArCommonDescPtr->arTxPort);
-+	FM_DMP_LN(buf, n, "Active HPNIA: 0x%08x\n", ArCommonDescPtr->activeHPNIA);
-+	FM_DMP_LN(buf, n, "Snmp port: 0x%x\n", ArCommonDescPtr->snmpPort);
-+	FM_DMP_LN(buf, n, "MAC address: %02x:%02x:%02x:%02x:%02x:%02x\n", ArCommonDescPtr->macStationAddr[0],
-+		ArCommonDescPtr->macStationAddr[1], ArCommonDescPtr->macStationAddr[2],
-+		ArCommonDescPtr->macStationAddr[3], ArCommonDescPtr->macStationAddr[4],
-+		ArCommonDescPtr->macStationAddr[5]);
-+	FM_DMP_LN(buf, n, "filterControl: 0x%02x\n", ArCommonDescPtr->filterControl);
-+	FM_DMP_LN(buf, n, "tcpControlPass: 0x%04x\n", ArCommonDescPtr->tcpControlPass);
-+	FM_DMP_LN(buf, n, "ipProtocolTblSize: 0x%x\n", ArCommonDescPtr->ipProtocolTblSize);
-+	FM_DMP_LN(buf, n, "udpPortTblSize: 0x%x\n", ArCommonDescPtr->udpPortTblSize);
-+	FM_DMP_LN(buf, n, "tcpPortTblSize: 0x%x\n", ArCommonDescPtr->tcpPortTblSize);
-+	if (ArCommonDescPtr->p_ArStats)
-+	{
-+		t_ArStatistics *arStatistics = (t_ArStatistics*)
-+			ioremap(ioread32be(&ArCommonDescPtr->p_ArStats) +
-+			p_FmPort->fmMuramPhysBaseAddr,
-+			sizeof (t_ArStatistics));
-+		FM_DMP_LN(buf, n, "\nDSAR statistics\n");
-+		FM_DMP_LN(buf, n, "DSAR_Discarded:            0x%x\n", arStatistics->dsarDiscarded);
-+		FM_DMP_LN(buf, n, "DSAR_Err_Discarded:        0x%x\n", arStatistics->dsarErrDiscarded);
-+		FM_DMP_LN(buf, n, "DSAR_Frag_Discarded:       0x%x\n", arStatistics->dsarFragDiscarded);
-+		FM_DMP_LN(buf, n, "DSAR_Tunnel_Discarded:     0x%x\n", arStatistics->dsarTunnelDiscarded);
-+		FM_DMP_LN(buf, n, "DSAR_ARP_Discarded:        0x%x\n", arStatistics->dsarArpDiscarded);
-+		FM_DMP_LN(buf, n, "DSAR_IP_Discarded:         0x%x\n", arStatistics->dsarIpDiscarded);
-+		FM_DMP_LN(buf, n, "DSAR_TCP_Discarded:        0x%x\n", arStatistics->dsarTcpDiscarded);
-+		FM_DMP_LN(buf, n, "DSAR_UDP_Discarded:        0x%x\n", arStatistics->dsarUdpDiscarded);
-+		FM_DMP_LN(buf, n, "DSAR_ICMPv6_Checksum_Err:  0x%x\n", arStatistics->dsarIcmpV6ChecksumErr);
-+		FM_DMP_LN(buf, n, "DSAR_ICMPv6_Other_Type:    0x%x\n", arStatistics->dsarIcmpV6OtherType);
-+		FM_DMP_LN(buf, n, "DSAR_ICMPv4_Other_Type:    0x%x\n", arStatistics->dsarIcmpV4OtherType);
-+		
-+		iounmap(arStatistics);
-+	}
-+	if (ArCommonDescPtr->p_ArpDescriptor)
-+	{
-+		t_DsarArpDescriptor* ArpDescriptor = (t_DsarArpDescriptor*)
-+			ioremap(ioread32be(&ArCommonDescPtr->p_ArpDescriptor) +
-+			p_FmPort->fmMuramPhysBaseAddr,
-+			sizeof (t_DsarArpDescriptor));
-+		FM_DMP_LN(buf, n, "\nARP\n");
-+		FM_DMP_LN(buf, n, "===\n");
-+		FM_DMP_LN(buf, n, "control bits 0x%04x\n", ArpDescriptor->control);
-+		if (ArpDescriptor->numOfBindings)
-+		{
-+			char ip_str[100];
-+			t_DsarArpBindingEntry* bindings = ioremap(
-+				ioread32be(&ArpDescriptor->p_Bindings) +
-+				p_FmPort->fmMuramPhysBaseAddr,
-+				ArpDescriptor->numOfBindings *
-+				sizeof(t_DsarArpBindingEntry));
-+			uint8_t* ip_addr = (uint8_t*)&bindings->ipv4Addr;
-+			FM_DMP_LN(buf, n, "      ip          vlan id\n");
-+			for (i = 0; i < ArpDescriptor->numOfBindings; i++)
-+			{
-+				n += snprintf(ip_str, 100, "%d.%d.%d.%d",
-+					ip_addr[0], ip_addr[1],
-+					ip_addr[2], ip_addr[3]);
-+				FM_DMP_LN(buf, n, "%-15s     0x%x\n",
-+					ip_str, bindings->vlanId);
-+			}
-+			iounmap(bindings);
-+		}
-+		if (ArpDescriptor->p_Statistics)
-+		{
-+			t_DsarArpStatistics* arpStats = ioremap(
-+				ioread32be(&ArpDescriptor->p_Statistics) +
-+				p_FmPort->fmMuramPhysBaseAddr,
-+				sizeof(t_DsarArpStatistics));
-+			FM_DMP_LN(buf, n, "statistics\n");
-+			FM_DMP_LN(buf, n, "INVAL_CNT:  0x%x\n", arpStats->invalCnt);
-+			FM_DMP_LN(buf, n, "ECHO_CNT:   0x%x\n", arpStats->echoCnt);
-+			FM_DMP_LN(buf, n, "CD_CNT:     0x%x\n", arpStats->cdCnt);
-+			FM_DMP_LN(buf, n, "AR_CNT:     0x%x\n", arpStats->arCnt);
-+			FM_DMP_LN(buf, n, "RATM_CNT:   0x%x\n", arpStats->ratmCnt);
-+			FM_DMP_LN(buf, n, "UKOP_CNT:   0x%x\n", arpStats->ukopCnt);
-+			FM_DMP_LN(buf, n, "NMTP_CNT:   0x%x\n", arpStats->nmtpCnt);
-+			FM_DMP_LN(buf, n, "NMVLAN_CNT: 0x%x\n", arpStats->nmVlanCnt);
-+			iounmap(arpStats);
-+		}
-+		
-+		iounmap(ArpDescriptor);
-+	}
-+	if (ArCommonDescPtr->p_IcmpV4Descriptor)
-+	{
-+		t_DsarIcmpV4Descriptor* ICMPV4Descriptor =
-+			(t_DsarIcmpV4Descriptor*)ioremap(ioread32be(
-+			&ArCommonDescPtr->p_IcmpV4Descriptor) +
-+			p_FmPort->fmMuramPhysBaseAddr,
-+			sizeof (t_DsarIcmpV4Descriptor));
-+		FM_DMP_LN(buf, n, "\nEcho ICMPv4\n");
-+		FM_DMP_LN(buf, n, "===========\n");
-+		FM_DMP_LN(buf, n, "control bits 0x%04x\n", ICMPV4Descriptor->control);
-+		if (ICMPV4Descriptor->numOfBindings)
-+		{
-+			char ip_str[100];
-+			t_DsarArpBindingEntry* bindings = ioremap(
-+				ioread32be(&ICMPV4Descriptor->p_Bindings) +
-+				p_FmPort->fmMuramPhysBaseAddr,
-+				ICMPV4Descriptor->numOfBindings *
-+				sizeof(t_DsarArpBindingEntry));
-+			uint8_t* ip_addr = (uint8_t*)&bindings->ipv4Addr;
-+			FM_DMP_LN(buf, n, "      ip          vlan id\n");
-+			for (i = 0; i < ICMPV4Descriptor->numOfBindings; i++)
-+			{
-+				n += snprintf(ip_str, 100, "%d.%d.%d.%d",
-+					ip_addr[0], ip_addr[1],
-+					ip_addr[2], ip_addr[3]);
-+				FM_DMP_LN(buf, n, "%-15s     0x%x\n",
-+					ip_str, bindings->vlanId);
-+			}
-+			iounmap(bindings);
-+		}
-+		if (ICMPV4Descriptor->p_Statistics)
-+		{
-+			t_DsarIcmpV4Statistics* icmpv4Stats = ioremap(
-+				ioread32be(&ICMPV4Descriptor->p_Statistics) +
-+				p_FmPort->fmMuramPhysBaseAddr,
-+				sizeof(t_DsarIcmpV4Statistics));
-+			FM_DMP_LN(buf, n, "statistics\n");
-+			FM_DMP_LN(buf, n, "INVAL_CNT:  0x%x\n", icmpv4Stats->invalCnt);
-+			FM_DMP_LN(buf, n, "NMVLAN_CNT: 0x%x\n", icmpv4Stats->nmVlanCnt);
-+			FM_DMP_LN(buf, n, "NMIP_CNT:   0x%x\n", icmpv4Stats->nmIpCnt);
-+			FM_DMP_LN(buf, n, "AR_CNT:     0x%x\n", icmpv4Stats->arCnt);
-+			FM_DMP_LN(buf, n, "CSERR_CNT:  0x%x\n", icmpv4Stats->cserrCnt);
-+			iounmap(icmpv4Stats);
-+		}
-+		iounmap(ICMPV4Descriptor);
-+	}
-+	if (ArCommonDescPtr->p_NdDescriptor)
-+	{
-+		t_DsarNdDescriptor *NDDescriptor =
-+			(t_DsarNdDescriptor*)ioremap(ioread32be(
-+			&ArCommonDescPtr->p_NdDescriptor) + p_FmPort->
-+			fmMuramPhysBaseAddr, sizeof (t_DsarNdDescriptor));
-+		FM_DMP_LN(buf, n, "\nNDP\n");
-+		FM_DMP_LN(buf, n, "===\n");
-+		FM_DMP_LN(buf, n, "control bits 0x%04x\n", NDDescriptor->control);
-+		FM_DMP_LN(buf, n, "solicited address 0x%08x\n", NDDescriptor->solicitedAddr);
-+		if (NDDescriptor->numOfBindings)
-+		{
-+			char ip_str[100];
-+			t_DsarIcmpV6BindingEntry* bindings = ioremap(
-+				ioread32be(&NDDescriptor->p_Bindings) +
-+				p_FmPort->fmMuramPhysBaseAddr,
-+				NDDescriptor->numOfBindings *
-+				sizeof(t_DsarIcmpV6BindingEntry));
-+			uint16_t* ip_addr = (uint16_t*)&bindings->ipv6Addr;
-+			FM_DMP_LN(buf, n, "                  ip                        vlan id\n");
-+			for (i = 0; i < NDDescriptor->numOfBindings; i++)
-+			{
-+				n += snprintf(ip_str, 100,
-+					"%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x",
-+				ip_addr[0], ip_addr[1], ip_addr[2], ip_addr[3],
-+				ip_addr[4], ip_addr[5], ip_addr[6], ip_addr[7]);
-+				FM_DMP_LN(buf, n, "%s     0x%x\n", ip_str, bindings->vlanId);
-+			}
-+			iounmap(bindings);
-+		}
-+		if (NDDescriptor->p_Statistics)
-+		{
-+			t_NdStatistics* ndStats = ioremap(
-+				ioread32be(&NDDescriptor->p_Statistics) +
-+				p_FmPort->fmMuramPhysBaseAddr,
-+				sizeof(t_NdStatistics));
-+			FM_DMP_LN(buf, n, "statistics\n");
-+			FM_DMP_LN(buf, n, "INVAL_CNT:    0x%x\n", ndStats->invalCnt);
-+			FM_DMP_LN(buf, n, "NMVLAN_CNT:   0x%x\n", ndStats->nmVlanCnt);
-+			FM_DMP_LN(buf, n, "NMIP_CNT:     0x%x\n", ndStats->nmIpCnt);
-+			FM_DMP_LN(buf, n, "AR_CNT:       0x%x\n", ndStats->arCnt);
-+			FM_DMP_LN(buf, n, "USADVERT_CNT: 0x%x\n", ndStats->usadvertCnt);
-+			FM_DMP_LN(buf, n, "NMMCAST_CNT:  0x%x\n", ndStats->nmmcastCnt);
-+			FM_DMP_LN(buf, n, "NSLLA_CNT:    0x%x\n", ndStats->nsllaCnt);
-+			iounmap(ndStats);
-+		}
-+		iounmap(NDDescriptor);
-+	}
-+	if (ArCommonDescPtr->p_IcmpV6Descriptor)
-+	{
-+		t_DsarIcmpV6Descriptor *ICMPV6Descriptor =
-+			(t_DsarIcmpV6Descriptor*)ioremap(ioread32be(
-+			&ArCommonDescPtr->p_IcmpV6Descriptor) + p_FmPort->
-+			fmMuramPhysBaseAddr, sizeof (t_DsarIcmpV6Descriptor));
-+		FM_DMP_LN(buf, n, "\nEcho ICMPv6\n");
-+		FM_DMP_LN(buf, n, "===========\n");
-+		FM_DMP_LN(buf, n, "control bits 0x%04x\n", ICMPV6Descriptor->control);
-+		if (ICMPV6Descriptor->numOfBindings)
-+		{
-+			char ip_str[100];
-+			t_DsarIcmpV6BindingEntry* bindings = ioremap(
-+				ioread32be(&ICMPV6Descriptor->p_Bindings) +
-+				p_FmPort->fmMuramPhysBaseAddr,
-+				ICMPV6Descriptor->numOfBindings *
-+				sizeof(t_DsarIcmpV6BindingEntry));
-+			uint16_t* ip_addr = (uint16_t*)&bindings->ipv6Addr;
-+			FM_DMP_LN(buf, n, "                  ip                        vlan id\n");
-+			for (i = 0; i < ICMPV6Descriptor->numOfBindings; i++)
-+			{
-+				n += snprintf(ip_str, 100,
-+					"%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x",
-+				ip_addr[0], ip_addr[1], ip_addr[2], ip_addr[3],
-+				ip_addr[4], ip_addr[5], ip_addr[6], ip_addr[7]);
-+				FM_DMP_LN(buf, n, "%s     0x%x\n", ip_str, bindings->vlanId);
-+			}
-+			iounmap(bindings);
-+		}
-+		if (ICMPV6Descriptor->p_Statistics)
-+		{
-+			t_DsarIcmpV6Statistics* icmpv6Stats = ioremap(
-+				ioread32be(&ICMPV6Descriptor->p_Statistics) +
-+				p_FmPort->fmMuramPhysBaseAddr,
-+				sizeof(t_DsarIcmpV6Statistics));
-+			FM_DMP_LN(buf, n, "statistics\n");
-+			FM_DMP_LN(buf, n, "INVAL_CNT:    0x%x\n", icmpv6Stats->invalCnt);
-+			FM_DMP_LN(buf, n, "NMVLAN_CNT:   0x%x\n", icmpv6Stats->nmVlanCnt);
-+			FM_DMP_LN(buf, n, "NMIP_CNT:     0x%x\n", icmpv6Stats->nmIpCnt);
-+			FM_DMP_LN(buf, n, "AR_CNT:       0x%x\n", icmpv6Stats->arCnt);
-+			iounmap(icmpv6Stats);
-+		}
-+		iounmap(ICMPV6Descriptor);
-+	}
-+	if (ArCommonDescPtr->p_SnmpDescriptor)
-+	{
-+		t_DsarSnmpDescriptor *SnmpDescriptor =
-+			(t_DsarSnmpDescriptor*)ioremap(ioread32be(
-+			&ArCommonDescPtr->p_SnmpDescriptor) + p_FmPort->
-+			fmMuramPhysBaseAddr, sizeof (t_DsarSnmpDescriptor));
-+		FM_DMP_LN(buf, n, "\nSNMP\n");
-+		FM_DMP_LN(buf, n, "===========\n");
-+		FM_DMP_LN(buf, n, "control bits 0x%04x\n", SnmpDescriptor->control);
-+		FM_DMP_LN(buf, n, "max message length 0x%04x\n", SnmpDescriptor->maxSnmpMsgLength);
-+		if (SnmpDescriptor->numOfIpv4Addresses)
-+		{
-+			char ip_str[100];
-+			t_DsarSnmpIpv4AddrTblEntry* addrs = ioremap(
-+				ioread32be(&SnmpDescriptor->p_Ipv4AddrTbl) +
-+				p_FmPort->fmMuramPhysBaseAddr,
-+				SnmpDescriptor->numOfIpv4Addresses *
-+				sizeof(t_DsarSnmpIpv4AddrTblEntry));
-+			uint8_t* ip_addr = (uint8_t*)&addrs->ipv4Addr;
-+			FM_DMP_LN(buf, n, "      ip          vlan id\n");
-+			for (i = 0; i < SnmpDescriptor->numOfIpv4Addresses; i++)
-+			{
-+				n += snprintf(ip_str, 100, "%d.%d.%d.%d",
-+					ip_addr[0], ip_addr[1],
-+					ip_addr[2], ip_addr[3]);
-+				FM_DMP_LN(buf, n, "%-15s     0x%x\n", ip_str, addrs->vlanId);
-+			}
-+			iounmap(addrs);
-+		}
-+		if (SnmpDescriptor->p_Statistics)
-+		{
-+			t_DsarSnmpStatistics* snmpStats = ioremap(
-+				ioread32be(&SnmpDescriptor->p_Statistics) +
-+				p_FmPort->fmMuramPhysBaseAddr,
-+				sizeof(t_DsarSnmpStatistics));
-+			FM_DMP_LN(buf, n, "statistics\n");
-+			FM_DMP_LN(buf, n, "snmpErrCnt:          0x%x\n", snmpStats->snmpErrCnt);
-+			FM_DMP_LN(buf, n, "snmpCommunityErrCnt: 0x%x\n", snmpStats->snmpCommunityErrCnt);
-+			FM_DMP_LN(buf, n, "snmpTotalDiscardCnt: 0x%x\n", snmpStats->snmpTotalDiscardCnt);
-+			FM_DMP_LN(buf, n, "snmpGetReqCnt:       0x%x\n", snmpStats->snmpGetReqCnt);
-+			FM_DMP_LN(buf, n, "snmpGetNextReqCnt:   0x%x\n", snmpStats->snmpGetNextReqCnt);
-+			iounmap(snmpStats);
-+		}
-+		iounmap(SnmpDescriptor);
-+	}
-+	iounmap(ArCommonDescPtr);
-+	iounmap(param_page);
-+	return n;
-+}
-+
-+static ssize_t show_fm_port_dsar_mem(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev;
-+#endif
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	p_LnxWrpFmPortDev =
-+		(t_LnxWrpFmPortDev *) dev_get_drvdata(dev);
-+
-+	local_irq_save(flags);
-+
-+	if (!p_LnxWrpFmPortDev->h_Dev) {
-+		n = snprintf(buf, PAGE_SIZE, "\tFM Port not configured...\n");
-+		return n;
-+	} else {
-+		n = snprintf(buf, PAGE_SIZE,
-+				"FM port driver registers dump.\n");
-+		n = fm_port_dsar_dump_mem(p_LnxWrpFmPortDev->h_Dev, buf, n);
-+	}
-+
-+	local_irq_restore(flags);
-+
-+	return n;
-+#else
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+			"Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+
-+	return n;
-+#endif
-+}
-+
-+static ssize_t show_fm_port_dsar_regs(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev;
-+#endif
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	p_LnxWrpFmPortDev =
-+		(t_LnxWrpFmPortDev *) dev_get_drvdata(dev);
-+
-+	local_irq_save(flags);
-+
-+	if (!p_LnxWrpFmPortDev->h_Dev) {
-+		n = snprintf(buf, PAGE_SIZE, "\tFM Port not configured...\n");
-+		return n;
-+	} else {
-+		n = snprintf(buf, PAGE_SIZE,
-+				"FM port driver registers dump.\n");
-+		n = fm_port_dsar_dump_regs(p_LnxWrpFmPortDev->h_Dev, buf, n);
-+	}
-+
-+	local_irq_restore(flags);
-+
-+	return n;
-+#else
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+			"Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+
-+	return n;
-+#endif
-+}
-+
-+#if (DPAA_VERSION >= 11)
-+static ssize_t show_fm_port_ipv4_options(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev;
-+#endif
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	p_LnxWrpFmPortDev =
-+		(t_LnxWrpFmPortDev *) dev_get_drvdata(dev);
-+
-+	local_irq_save(flags);
-+
-+	if (!p_LnxWrpFmPortDev->h_Dev) {
-+		n = snprintf(buf, PAGE_SIZE, "\tFM Port not configured...\n");
-+		return n;
-+	} else if (((t_FmPort *)p_LnxWrpFmPortDev->h_Dev)->p_ParamsPage
-+					== NULL) {
-+		n = snprintf(buf, PAGE_SIZE,
-+			"\tPort: FMan-controller params page not set\n");
-+		return n;
-+	} else {
-+		n = snprintf(buf, PAGE_SIZE,
-+			"Counter for fragmented pkt with IP header options\n");
-+		n = fm_port_dump_ipv4_opt(p_LnxWrpFmPortDev->h_Dev, buf, n);
-+	}
-+
-+	local_irq_restore(flags);
-+
-+	return n;
-+#else
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+			"Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+
-+	return n;
-+#endif
-+}
-+
-+#endif
-+
-+static ssize_t show_fm_port_bmi_regs(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev;
-+#endif
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	p_LnxWrpFmPortDev =
-+		(t_LnxWrpFmPortDev *) dev_get_drvdata(dev);
-+
-+	local_irq_save(flags);
-+
-+	if (!p_LnxWrpFmPortDev->h_Dev) {
-+		n = snprintf(buf, PAGE_SIZE, "\tFM Port not configured...\n");
-+		return n;
-+	} else {
-+		n = snprintf(buf, PAGE_SIZE,
-+				"FM port driver registers dump.\n");
-+		n = fm_port_dump_regs_bmi(p_LnxWrpFmPortDev->h_Dev, buf, n);
-+	}
-+
-+	local_irq_restore(flags);
-+
-+	return n;
-+#else
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+			"Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+
-+	return n;
-+#endif
-+}
-+
-+static ssize_t show_fm_port_qmi_regs(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	unsigned long flags;
-+	unsigned n = 0;
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev;
-+#endif
-+
-+	if (attr == NULL || buf == NULL || dev == NULL)
-+		return -EINVAL;
-+
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+	p_LnxWrpFmPortDev =
-+		(t_LnxWrpFmPortDev *) dev_get_drvdata(dev);
-+
-+	local_irq_save(flags);
-+
-+	if (!p_LnxWrpFmPortDev->h_Dev) {
-+		n = snprintf(buf, PAGE_SIZE, "\tFM Port not configured...\n");
-+		return n;
-+	} else {
-+		n = snprintf(buf, PAGE_SIZE,
-+				"FM port driver registers dump.\n");
-+		n = fm_port_dump_regs_qmi(p_LnxWrpFmPortDev->h_Dev, buf, n);
-+	}
-+
-+	local_irq_restore(flags);
-+
-+	return n;
-+#else
-+
-+	local_irq_save(flags);
-+	n = snprintf(buf, PAGE_SIZE,
-+			"Debug level is too low to dump registers!!!\n");
-+	local_irq_restore(flags);
-+
-+	return n;
-+#endif
-+}
-+
-+static DEVICE_ATTR(fm_port_regs, S_IRUGO | S_IRUSR, show_fm_port_regs, NULL);
-+static DEVICE_ATTR(fm_port_qmi_regs, S_IRUGO | S_IRUSR, show_fm_port_qmi_regs, NULL);
-+static DEVICE_ATTR(fm_port_bmi_regs, S_IRUGO | S_IRUSR, show_fm_port_bmi_regs, NULL);
-+#if (DPAA_VERSION >= 11)
-+static DEVICE_ATTR(fm_port_ipv4_opt, S_IRUGO | S_IRUSR, show_fm_port_ipv4_options, NULL);
-+#endif
-+static DEVICE_ATTR(fm_port_dsar_regs, S_IRUGO | S_IRUSR, show_fm_port_dsar_regs, NULL);
-+static DEVICE_ATTR(fm_port_dsar_mem, S_IRUGO | S_IRUSR, show_fm_port_dsar_mem, NULL);
-+
-+int fm_port_sysfs_create(struct device *dev)
-+{
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev;
-+
-+	if (dev == NULL)
-+		return -EINVAL;
-+
-+	p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_LnxWrpFmPortDev == NULL))
-+		return -EINVAL;
-+
-+	/* store to remove them when module is disabled */
-+	p_LnxWrpFmPortDev->dev_attr_regs = &dev_attr_fm_port_regs;
-+	p_LnxWrpFmPortDev->dev_attr_qmi_regs = &dev_attr_fm_port_qmi_regs;
-+	p_LnxWrpFmPortDev->dev_attr_bmi_regs = &dev_attr_fm_port_bmi_regs;
-+#if (DPAA_VERSION >= 11)
-+	p_LnxWrpFmPortDev->dev_attr_ipv4_opt = &dev_attr_fm_port_ipv4_opt;
-+#endif
-+	p_LnxWrpFmPortDev->dev_attr_dsar_regs = &dev_attr_fm_port_dsar_regs;
-+	p_LnxWrpFmPortDev->dev_attr_dsar_mem = &dev_attr_fm_port_dsar_mem;
-+	/* Registers dump entry - in future will be moved to debugfs */
-+	if (device_create_file(dev, &dev_attr_fm_port_regs) != 0)
-+		return -EIO;
-+	if (device_create_file(dev, &dev_attr_fm_port_qmi_regs) != 0)
-+		return -EIO;
-+	if (device_create_file(dev, &dev_attr_fm_port_bmi_regs) != 0)
-+		return -EIO;
-+#if (DPAA_VERSION >= 11)
-+	if (device_create_file(dev, &dev_attr_fm_port_ipv4_opt) != 0)
-+		return -EIO;
-+#endif
-+	if (device_create_file(dev, &dev_attr_fm_port_dsar_regs) != 0)
-+		return -EIO;
-+	if (device_create_file(dev, &dev_attr_fm_port_dsar_mem) != 0)
-+		return -EIO;
-+		
-+	/* FM Ports statistics */
-+	switch (p_LnxWrpFmPortDev->settings.param.portType) {
-+	case e_FM_PORT_TYPE_TX:
-+	case e_FM_PORT_TYPE_TX_10G:
-+		if (sysfs_create_group
-+			(&dev->kobj, &fm_tx_port_dev_stats_attr_grp) != 0)
-+			return -EIO;
-+		break;
-+	case e_FM_PORT_TYPE_RX:
-+	case e_FM_PORT_TYPE_RX_10G:
-+		if (sysfs_create_group
-+			(&dev->kobj, &fm_rx_port_dev_stats_attr_grp) != 0)
-+			return -EIO;
-+		break;
-+	case e_FM_PORT_TYPE_DUMMY:
-+	case e_FM_PORT_TYPE_OH_OFFLINE_PARSING:
-+		if (sysfs_create_group
-+			(&dev->kobj, &fm_oh_port_dev_stats_attr_grp) != 0)
-+			return -EIO;
-+		break;
-+	default:
-+		WARN(1, "FMD: failure at %s:%d/%s()!\n", __FILE__, __LINE__,
-+			__func__);
-+		return -EINVAL;
-+		break;
-+	};
-+
-+	return 0;
-+}
-+
-+void fm_port_sysfs_destroy(struct device *dev)
-+{
-+	t_LnxWrpFmPortDev *p_LnxWrpFmPortDev = NULL;
-+
-+	/* this function has never been tested !!! */
-+
-+	if (WARN_ON(dev == NULL))
-+		return;
-+
-+	p_LnxWrpFmPortDev = (t_LnxWrpFmPortDev *) dev_get_drvdata(dev);
-+	if (WARN_ON(p_LnxWrpFmPortDev == NULL))
-+		return;
-+
-+	/* The name attribute will be freed also by these 2 functions? */
-+	switch (p_LnxWrpFmPortDev->settings.param.portType) {
-+	case e_FM_PORT_TYPE_TX:
-+	case e_FM_PORT_TYPE_TX_10G:
-+		sysfs_remove_group(&dev->kobj, &fm_tx_port_dev_stats_attr_grp);
-+		break;
-+	case e_FM_PORT_TYPE_RX:
-+	case e_FM_PORT_TYPE_RX_10G:
-+		sysfs_remove_group(&dev->kobj, &fm_rx_port_dev_stats_attr_grp);
-+		break;
-+	case e_FM_PORT_TYPE_DUMMY:
-+	case e_FM_PORT_TYPE_OH_OFFLINE_PARSING:
-+		sysfs_remove_group(&dev->kobj, &fm_oh_port_dev_stats_attr_grp);
-+		break;
-+	default:
-+		WARN(1, "FMD: failure at %s:%d/%s()!\n", __FILE__, __LINE__,
-+		     __func__);
-+		break;
-+	};
-+
-+	device_remove_file(dev, p_LnxWrpFmPortDev->dev_attr_regs);
-+	device_remove_file(dev, p_LnxWrpFmPortDev->dev_attr_qmi_regs);
-+	device_remove_file(dev, p_LnxWrpFmPortDev->dev_attr_bmi_regs);
-+#if (DPAA_VERSION >= 11)
-+	device_remove_file(dev, p_LnxWrpFmPortDev->dev_attr_ipv4_opt);
-+#endif
-+	device_remove_file(dev, p_LnxWrpFmPortDev->dev_attr_dsar_regs);
-+	device_remove_file(dev, p_LnxWrpFmPortDev->dev_attr_dsar_mem);
-+}
-+
-+
-+int fm_port_dump_regs(void *h_dev, char *buf, int nn)
-+{
-+	t_FmPort *p_FmPort;
-+	t_Fm *p_Fm;
-+	uint8_t hardwarePortId;
-+	int n = nn;
-+
-+	p_FmPort = (t_FmPort *)h_dev;
-+	hardwarePortId = p_FmPort->hardwarePortId;
-+	p_Fm = (t_Fm *)p_FmPort->h_Fm;
-+
-+	FM_DMP_TITLE(buf, n, &p_Fm->p_FmBmiRegs->fmbm_pp[hardwarePortId - 1],
-+			"fmbm_pp for port %u", hardwarePortId);
-+	FM_DMP_MEM_32(buf, n,
-+			&p_Fm->p_FmBmiRegs->fmbm_pp[hardwarePortId - 1]);
-+
-+	FM_DMP_TITLE(buf, n, &p_Fm->p_FmBmiRegs->fmbm_pfs[hardwarePortId - 1],
-+			"fmbm_pfs for port %u", hardwarePortId);
-+	FM_DMP_MEM_32(buf, n,
-+		&p_Fm->p_FmBmiRegs->fmbm_pfs[hardwarePortId - 1]);
-+
-+	FM_DMP_TITLE(buf, n,
-+			&p_Fm->p_FmBmiRegs->fmbm_spliodn[hardwarePortId - 1],
-+			"fmbm_spliodn for port %u", hardwarePortId);
-+	FM_DMP_MEM_32(buf, n,
-+			&p_Fm->p_FmBmiRegs->fmbm_spliodn[hardwarePortId - 1]);
-+
-+	FM_DMP_TITLE(buf, n, &p_Fm->p_FmFpmRegs->fmfp_ps[hardwarePortId],
-+			"fmfp_psfor port %u", hardwarePortId);
-+	FM_DMP_MEM_32(buf, n, &p_Fm->p_FmFpmRegs->fmfp_ps[hardwarePortId]);
-+
-+	FM_DMP_TITLE(buf, n, &p_Fm->p_FmDmaRegs->fmdmplr[hardwarePortId / 2],
-+			"fmdmplrfor port %u", hardwarePortId);
-+	FM_DMP_MEM_32(buf, n,
-+			&p_Fm->p_FmDmaRegs->fmdmplr[hardwarePortId / 2]);
-+	return n;
-+}
-+
-+#if (DPAA_VERSION >= 11)
-+
-+int fm_port_dump_ipv4_opt(void *h_dev, char *buf, int nn)
-+{
-+	t_FmPort *p_FmPort;
-+	int n = nn;
-+
-+	p_FmPort = (t_FmPort *)h_dev;
-+
-+	FM_DMP_V32(buf, n, p_FmPort->p_ParamsPage, ipfOptionsCounter);
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+
-+	return n;
-+}
-+#endif
-+
-+int fm_port_dump_regs_bmi(void *h_dev, char *buf, int nn)
-+{
-+	t_FmPort *p_FmPort;
-+	u_FmPortBmiRegs *p_bmi;
-+
-+	char		arr[20];
-+	uint8_t		flag;
-+	int		i = 0;
-+	int		n = nn;
-+
-+	p_FmPort = (t_FmPort *)h_dev;
-+	p_bmi = p_FmPort->p_FmPortBmiRegs;
-+
-+	memset(arr, 0, sizeof(arr));
-+	switch (p_FmPort->portType) {
-+	case (e_FM_PORT_TYPE_OH_OFFLINE_PARSING):
-+		strcpy(arr, "OFFLINE-PARSING");
-+		flag = 0;
-+		break;
-+	case (e_FM_PORT_TYPE_OH_HOST_COMMAND):
-+		strcpy(arr, "HOST-COMMAND");
-+		flag = 0;
-+		break;
-+	case (e_FM_PORT_TYPE_RX):
-+		strcpy(arr, "RX");
-+		flag = 1;
-+		break;
-+	case (e_FM_PORT_TYPE_RX_10G):
-+		strcpy(arr, "RX-10G");
-+		flag = 1;
-+		break;
-+	case (e_FM_PORT_TYPE_TX):
-+		strcpy(arr, "TX");
-+		flag = 2;
-+		break;
-+	case (e_FM_PORT_TYPE_TX_10G):
-+		strcpy(arr, "TX-10G");
-+		flag = 2;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	FM_DMP_TITLE(buf, n, NULL,
-+		"FMan-Port (%s #%d) registers:",
-+		arr, p_FmPort->portId);
-+
-+	FM_DMP_TITLE(buf, n, p_bmi, "Bmi Port Regs");
-+
-+	switch (flag) {
-+	case (0):
-+		FM_DMP_SUBTITLE(buf, n, "\n");
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ocfg);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ost);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_oda);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_oicp);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofdne);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofne);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofca);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofpne);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_opso);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_opp);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_occb);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_oim);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofp);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofed);
-+
-+		FM_DMP_TITLE(buf, n,
-+			&(p_bmi->ohPortBmiRegs.fmbm_oprai), "fmbm_oprai");
-+		for (i = 0; i < FM_PORT_PRS_RESULT_NUM_OF_WORDS; ++i) {
-+			FM_DMP_MEM_32(buf, n,
-+				&(p_bmi->ohPortBmiRegs.fmbm_oprai[i]));
-+		}
-+		FM_DMP_SUBTITLE(buf, n, "\n");
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofqid);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_oefqid);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofsdm);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofsem);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofene);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_orlmts);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_orlmt);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ocmne);
-+		{
-+#ifndef FM_NO_OP_OBSERVED_POOLS
-+		if (p_FmPort->fmRevInfo.majorRev == 4) {
-+			FM_DMP_TITLE(buf, n,
-+				&p_bmi->ohPortBmiRegs.fmbm_oebmpi,
-+				"fmbm_oebmpi");
-+
-+			for (i = 0; i < FM_PORT_MAX_NUM_OF_OBSERVED_EXT_POOLS; ++i) {
-+				FM_DMP_MEM_32(buf, n,
-+					&(p_bmi->ohPortBmiRegs.fmbm_oebmpi[i]));
-+			}
-+			FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ocgm);
-+		}
-+#endif /* !FM_NO_OP_OBSERVED_POOLS */
-+		}
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ostc);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofrc);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofdc);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofledc);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofufdc);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_offc);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofwdc);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofldec);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_opc);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_opcp);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_occn);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_otuc);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_oduc);
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ofuc);
-+		FM_DMP_TITLE(buf, n, &(p_bmi->ohPortBmiRegs.fmbm_odcfg),
-+				"fmbm_odcfg");
-+		for (i = 0; i < 3; ++i) {
-+			FM_DMP_MEM_32(buf, n,
-+				&(p_bmi->ohPortBmiRegs.fmbm_odcfg[i]));
-+		}
-+		FM_DMP_SUBTITLE(buf, n, "\n");
-+
-+		FM_DMP_V32(buf, n, &p_bmi->ohPortBmiRegs, fmbm_ogpr);
-+	break;
-+	case (1):
-+		FM_DMP_SUBTITLE(buf, n, "\n");
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rcfg);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rst);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rda);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rfp);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_reth);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rfed);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_ricp);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rebm);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rfne);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rfca);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rfpne);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rpso);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rpp);
-+		FM_DMP_TITLE(buf, n, &(p_bmi->rxPortBmiRegs.fmbm_rprai),
-+			"fmbm_rprai");
-+		for (i = 0; i < FM_PORT_PRS_RESULT_NUM_OF_WORDS; ++i) {
-+			FM_DMP_MEM_32(buf, n,
-+				&(p_bmi->rxPortBmiRegs.fmbm_rprai[i]));
-+		}
-+		FM_DMP_SUBTITLE(buf, n, "\n");
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rfqid);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_refqid);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rfsdm);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rfsem);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rfene);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rcmne);
-+		FM_DMP_TITLE(buf, n, &p_bmi->rxPortBmiRegs.fmbm_ebmpi,
-+				"fmbm_ebmpi");
-+		for (i = 0; i < FM_PORT_MAX_NUM_OF_EXT_POOLS; ++i) {
-+			FM_DMP_MEM_32(buf, n,
-+				&(p_bmi->rxPortBmiRegs.fmbm_ebmpi[i]));
-+		}
-+		FM_DMP_TITLE(buf, n, &p_bmi->rxPortBmiRegs.fmbm_acnt,
-+				"fmbm_acnt");
-+		for (i = 0; i < FM_PORT_MAX_NUM_OF_EXT_POOLS; ++i) {
-+			FM_DMP_MEM_32(buf, n,
-+				&(p_bmi->rxPortBmiRegs.fmbm_acnt[i]));
-+		}
-+		FM_DMP_TITLE(buf, n, &p_bmi->rxPortBmiRegs.fmbm_rcgm,
-+				"fmbm_rcgm");
-+		for (i = 0; i < FM_PORT_NUM_OF_CONGESTION_GRPS / 32; ++i) {
-+			FM_DMP_MEM_32(buf, n,
-+				&(p_bmi->rxPortBmiRegs.fmbm_rcgm[i]));
-+		}
-+
-+		FM_DMP_SUBTITLE(buf, n, "\n");
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rmpd);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rstc);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rfrc);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rfbc);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rlfc);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rffc);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rfcd);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rfldec);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rodc);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rpc);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rpcp);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rccn);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rtuc);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rrquc);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rduc);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rfuc);
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rpac);
-+		FM_DMP_TITLE(buf, n, &(p_bmi->rxPortBmiRegs.fmbm_rdcfg),
-+				"fmbm_rdcfg");
-+		for (i = 0; i < 3; ++i) {
-+			FM_DMP_MEM_32(buf, n,
-+				&(p_bmi->rxPortBmiRegs.fmbm_rdcfg[i]));
-+		}
-+		FM_DMP_SUBTITLE(buf, n, "\n");
-+		FM_DMP_V32(buf, n, &p_bmi->rxPortBmiRegs, fmbm_rgpr);
-+		break;
-+	case (2):
-+		FM_DMP_SUBTITLE(buf, n, "\n");
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tcfg);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tst);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tda);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tfp);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tfed);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_ticp);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tfdne);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tfca);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tcfqid);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tfeqid);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tfene);
-+#if (DPAA_VERSION >= 11)
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tfne);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tcmne);
-+#endif /* (DPAA_VERSION >= 11) */
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_trlmts);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_trlmt);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tstc);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tfrc);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tfdc);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tfledc);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tfufdc);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tpc);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tpcp);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tccn);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_ttuc);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_ttcquc);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tduc);
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tfuc);
-+		FM_DMP_TITLE(buf, n, &(p_bmi->txPortBmiRegs.fmbm_tdcfg),
-+				"fmbm_tdcfg");
-+		for (i = 0; i < 3 ; ++i) {
-+			FM_DMP_MEM_32(buf, n,
-+				&(p_bmi->txPortBmiRegs.fmbm_tdcfg[i]));
-+		}
-+		FM_DMP_SUBTITLE(buf, n, "\n");
-+		FM_DMP_V32(buf, n, &p_bmi->txPortBmiRegs, fmbm_tgpr);
-+		break;
-+	}
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+
-+	return n;
-+}
-+
-+int fm_port_dump_regs_qmi(void *h_dev, char *buf, int nn)
-+{
-+	t_FmPort *p_FmPort;
-+	int n = nn;
-+
-+	p_FmPort = (t_FmPort *)h_dev;
-+
-+	FM_DMP_TITLE(buf, n, p_FmPort->p_FmPortQmiRegs, "Qmi Port Regs");
-+
-+	FM_DMP_V32(buf, n, p_FmPort->p_FmPortQmiRegs, fmqm_pnc);
-+	FM_DMP_V32(buf, n, p_FmPort->p_FmPortQmiRegs, fmqm_pns);
-+	FM_DMP_V32(buf, n, p_FmPort->p_FmPortQmiRegs, fmqm_pnts);
-+	FM_DMP_V32(buf, n, p_FmPort->p_FmPortQmiRegs, fmqm_pnen);
-+	FM_DMP_V32(buf, n, p_FmPort->p_FmPortQmiRegs, fmqm_pnetfc);
-+	FM_DMP_V32(buf, n,
-+		&p_FmPort->p_FmPortQmiRegs->nonRxQmiRegs, fmqm_pndn);
-+	FM_DMP_V32(buf, n,
-+		&p_FmPort->p_FmPortQmiRegs->nonRxQmiRegs, fmqm_pndc);
-+	FM_DMP_V32(buf, n,
-+		&p_FmPort->p_FmPortQmiRegs->nonRxQmiRegs, fmqm_pndtfc);
-+	FM_DMP_V32(buf, n,
-+		&p_FmPort->p_FmPortQmiRegs->nonRxQmiRegs, fmqm_pndfdc);
-+	FM_DMP_V32(buf, n,
-+		&p_FmPort->p_FmPortQmiRegs->nonRxQmiRegs, fmqm_pndcc);
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+
-+	return n;
-+}
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs_fm_port.h
-@@ -0,0 +1,56 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/*
-+ @File          lnxwrp_sysfs_fm_port.h
-+
-+ @Description   FM port sysfs functions.
-+
-+*/
-+
-+#ifndef LNXWRP_SYSFS_FM_PORT_H_
-+#define LNXWRP_SYSFS_FM_PORT_H_
-+
-+#include "lnxwrp_sysfs.h"
-+
-+int fm_port_sysfs_create(struct device *dev);
-+void fm_port_sysfs_destroy(struct device *dev);
-+
-+int fm_port_dump_regs(void *h_dev, char *buf, int n);
-+int fm_port_dump_regs_bmi(void *h_dev, char *buf, int n);
-+int fm_port_dump_regs_qmi(void *h_dev, char *buf, int n);
-+
-+#if (DPAA_VERSION >= 11)
-+int fm_port_dump_ipv4_opt(void *h_dev, char *buf, int n);
-+#endif
-+
-+#endif /* LNXWRP_SYSFS_FM_PORT_H_ */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/xx/Makefile
-@@ -0,0 +1,18 @@
-+#
-+# Makefile for the Freescale Ethernet controllers
-+#
-+ccflags-y           += -DVERSION=\"\"
-+#
-+#Include netcomm SW specific definitions
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+
-+obj-y		+= fsl-ncsw-xx.o
-+
-+ifneq ($(CONFIG_FMAN_ARM),y)
-+fsl-ncsw-xx-objs	:=  xx_linux.o \
-+				module_strings.o
-+else
-+fsl-ncsw-xx-objs	:= xx_arm_linux.o \
-+				module_strings.o
-+endif
-+
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/xx/module_strings.c
-@@ -0,0 +1,46 @@
-+/*
-+ * Copyright 2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/* Module names for debug messages */
-+const char *moduleStrings[] =
-+{
-+    "",                         /* MODULE_UNKNOWN */
-+    "FM",                       /* MODULE_FM */
-+    "FM-MURAM",                 /* MODULE_FM_MURAM */
-+    "FM-PCD",                   /* MODULE_FM_PCD */
-+    "FM-RTC",                   /* MODULE_FM_RTC */
-+    "FM-MAC",                   /* MODULE_FM_MAC */
-+    "FM-Port",                  /* MODULE_FM_PORT */
-+    "MM",                       /* MODULE_MM */
-+    "FM-SP",                    /* MODULE_FM_SP */
-+    "FM-MACSEC"                 /* MODULE_FM_MACSEC */
-+};
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/xx/xx_arm_linux.c
-@@ -0,0 +1,905 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**************************************************************************//**
-+ @File          xx_arm_linux.c
-+
-+ @Description   XX routines implementation for Linux.
-+*//***************************************************************************/
-+#include <linux/version.h>
-+
-+#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
-+#define MODVERSIONS
-+#endif
-+#ifdef MODVERSIONS
-+#include <config/modversions.h>
-+#endif /* MODVERSIONS */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/string.h>
-+#include <linux/ptrace.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/fs.h>
-+#include <linux/vmalloc.h>
-+#include <linux/init.h>
-+#include <linux/timer.h>
-+#include <linux/spinlock.h>
-+#include <linux/delay.h>
-+#include <linux/proc_fs.h>
-+#include <linux/smp.h>
-+#include <linux/of.h>
-+#include <linux/irqdomain.h>
-+
-+#include <linux/workqueue.h>
-+
-+#ifdef BIGPHYSAREA_ENABLE
-+#include <linux/bigphysarea.h>
-+#endif /* BIGPHYSAREA_ENABLE */
-+
-+//#include <sysdev/fsl_soc.h>
-+#include <asm/pgtable.h>
-+#include <asm/irq.h>
-+#include <asm/bitops.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <asm/atomic.h>
-+#include <asm/string.h>
-+#include <asm/byteorder.h>
-+#include <asm/page.h>
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+#include "list_ext.h"
-+#include "mm_ext.h"
-+#include "sys_io_ext.h"
-+#include "xx.h"
-+
-+
-+#define __ERR_MODULE__      MODULE_UNKNOWN
-+
-+#ifdef BIGPHYSAREA_ENABLE
-+#define MAX_ALLOCATION_SIZE     128 * 1024 /* Maximum size allocated with kmalloc is 128K */
-+
-+
-+/* TODO: large allocations => use big phys area */
-+/******************************************************************************
-+ * routine:     get_nr_pages
-+ *
-+ * description:
-+ *     calculates the number of memory pages for a given size (in bytes)
-+ *
-+ * arguments:
-+ *     size       - the number of bytes
-+ *
-+ * return code:
-+ *     The number of pages
-+ *
-+ *****************************************************************************/
-+static __inline__ uint32_t get_nr_pages (uint32_t size)
-+{
-+    return (uint32_t)((size >> PAGE_SHIFT) + (size & PAGE_SHIFT ? 1 : 0));
-+}
-+
-+static bool in_big_phys_area (uint32_t addr)
-+{
-+    uint32_t base, size;
-+
-+    bigphysarea_get_details (&base, &size);
-+    return ((addr >= base) && (addr < base + size));
-+}
-+#endif /* BIGPHYSAREA_ENABLE */
-+
-+void * xx_Malloc(uint32_t n)
-+{
-+    void        *a;
-+    uint32_t    flags;
-+
-+    flags = XX_DisableAllIntr();
-+#ifdef BIGPHYSAREA_ENABLE
-+    if (n >= MAX_ALLOCATION_SIZE)
-+        a = (void*)bigphysarea_alloc_pages(get_nr_pages(n), 0, GFP_ATOMIC);
-+    else
-+#endif /* BIGPHYSAREA_ENABLE */
-+    a = (void *)kmalloc((uint32_t)n, GFP_ATOMIC);
-+    if (!a)
-+        XX_Print("No memory for XX_Malloc\n");
-+    XX_RestoreAllIntr(flags);
-+
-+    return a;
-+}
-+
-+void xx_Free(void *p)
-+{
-+#ifdef BIGPHYSAREA_ENABLE
-+    if (in_big_phys_area ((uint32_t)p))
-+        bigphysarea_free_pages(p);
-+    else
-+#endif /* BIGPHYSAREA_ENABLE */
-+    kfree(p);
-+}
-+
-+void XX_Exit(int status)
-+{
-+    WARN(1, "\n\nFMD: fatal error, driver can't go on!!!\n\n");
-+}
-+
-+#define BUF_SIZE    512
-+void XX_Print(char *str, ...)
-+{
-+    va_list args;
-+#ifdef CONFIG_SMP
-+    char buf[BUF_SIZE];
-+#endif /* CONFIG_SMP */
-+
-+    va_start(args, str);
-+#ifdef CONFIG_SMP
-+    if (vsnprintf (buf, BUF_SIZE, str, args) >= BUF_SIZE)
-+        printk(KERN_WARNING "Illegal string to print!\n    more than %d characters.\n\tString was not printed completelly.\n", BUF_SIZE);
-+    printk(KERN_CRIT "cpu %d: %s",  raw_smp_processor_id(), buf);
-+#else
-+    vprintk(str, args);
-+#endif /* CONFIG_SMP */
-+    va_end(args);
-+}
-+
-+void XX_Fprint(void *file, char *str, ...)
-+{
-+    va_list args;
-+#ifdef CONFIG_SMP
-+    char buf[BUF_SIZE];
-+#endif /* CONFIG_SMP */
-+
-+    va_start(args, str);
-+#ifdef CONFIG_SMP
-+    if (vsnprintf (buf, BUF_SIZE, str, args) >= BUF_SIZE)
-+        printk(KERN_WARNING "Illegal string to print!\n    more than %d characters.\n\tString was not printed completelly.\n", BUF_SIZE);
-+    printk (KERN_CRIT "cpu %d: %s", smp_processor_id(), buf);
-+
-+#else
-+    vprintk(str, args);
-+#endif /* CONFIG_SMP */
-+    va_end(args);
-+}
-+
-+#ifdef DEBUG_XX_MALLOC
-+typedef void (*t_ffn)(void *);
-+typedef struct {
-+    t_ffn       f_free;
-+    void        *mem;
-+    char        *fname;
-+    int         fline;
-+    uint32_t    size;
-+    t_List      node;
-+} t_MemDebug;
-+#define MEMDBG_OBJECT(p_List) LIST_OBJECT(p_List, t_MemDebug, node)
-+
-+LIST(memDbgLst);
-+
-+
-+void * XX_MallocDebug(uint32_t size, char *fname, int line)
-+{
-+    void       *mem;
-+    t_MemDebug *p_MemDbg;
-+
-+    p_MemDbg = (t_MemDebug *)xx_Malloc(sizeof(t_MemDebug));
-+    if (p_MemDbg == NULL)
-+        return NULL;
-+
-+    mem = xx_Malloc(size);
-+    if (mem == NULL)
-+    {
-+        XX_Free(p_MemDbg);
-+        return NULL;
-+    }
-+
-+    INIT_LIST(&p_MemDbg->node);
-+    p_MemDbg->f_free = xx_Free;
-+    p_MemDbg->mem    = mem;
-+    p_MemDbg->fname  = fname;
-+    p_MemDbg->fline  = line;
-+    p_MemDbg->size   = size+sizeof(t_MemDebug);
-+    LIST_AddToTail(&p_MemDbg->node, &memDbgLst);
-+
-+    return mem;
-+}
-+
-+void * XX_MallocSmartDebug(uint32_t size,
-+                           int      memPartitionId,
-+                           uint32_t align,
-+                           char     *fname,
-+                           int      line)
-+{
-+    void       *mem;
-+    t_MemDebug *p_MemDbg;
-+
-+    p_MemDbg = (t_MemDebug *)XX_Malloc(sizeof(t_MemDebug));
-+    if (p_MemDbg == NULL)
-+        return NULL;
-+
-+    mem = xx_MallocSmart((uint32_t)size, memPartitionId, align);
-+    if (mem == NULL)
-+    {
-+        XX_Free(p_MemDbg);
-+        return NULL;
-+    }
-+
-+    INIT_LIST(&p_MemDbg->node);
-+    p_MemDbg->f_free = xx_FreeSmart;
-+    p_MemDbg->mem    = mem;
-+    p_MemDbg->fname  = fname;
-+    p_MemDbg->fline  = line;
-+    p_MemDbg->size   = size+sizeof(t_MemDebug);
-+    LIST_AddToTail(&p_MemDbg->node, &memDbgLst);
-+
-+    return mem;
-+}
-+
-+static void debug_free(void *mem)
-+{
-+    t_List      *p_MemDbgLh = NULL;
-+    t_MemDebug  *p_MemDbg;
-+    bool        found = FALSE;
-+
-+    if (LIST_IsEmpty(&memDbgLst))
-+    {
-+        REPORT_ERROR(MAJOR, E_ALREADY_FREE, ("Unbalanced free (0x%08x)", mem));
-+        return;
-+    }
-+
-+    LIST_FOR_EACH(p_MemDbgLh, &memDbgLst)
-+    {
-+        p_MemDbg = MEMDBG_OBJECT(p_MemDbgLh);
-+        if (p_MemDbg->mem == mem)
-+        {
-+            found = TRUE;
-+            break;
-+        }
-+    }
-+
-+    if (!found)
-+    {
-+        REPORT_ERROR(MAJOR, E_NOT_FOUND,
-+                     ("Attempt to free unallocated address (0x%08x)",mem));
-+        dump_stack();
-+        return;
-+    }
-+
-+    LIST_Del(p_MemDbgLh);
-+    p_MemDbg->f_free(mem);
-+    p_MemDbg->f_free(p_MemDbg);
-+}
-+
-+void XX_FreeSmart(void *p)
-+{
-+    debug_free(p);
-+}
-+
-+
-+void XX_Free(void *p)
-+{
-+    debug_free(p);
-+}
-+
-+#else /* not DEBUG_XX_MALLOC */
-+void * XX_Malloc(uint32_t size)
-+{
-+    return xx_Malloc(size);
-+}
-+
-+void * XX_MallocSmart(uint32_t size, int memPartitionId, uint32_t alignment)
-+{
-+    return xx_MallocSmart(size,memPartitionId, alignment);
-+}
-+
-+void XX_FreeSmart(void *p)
-+{
-+    xx_FreeSmart(p);
-+}
-+
-+
-+void XX_Free(void *p)
-+{
-+    xx_Free(p);
-+}
-+#endif /* not DEBUG_XX_MALLOC */
-+
-+
-+#if (defined(REPORT_EVENTS) && (REPORT_EVENTS > 0))
-+void XX_EventById(uint32_t event, t_Handle appId, uint16_t flags, char *msg)
-+{
-+    e_Event eventCode = (e_Event)event;
-+
-+    UNUSED(eventCode);
-+    UNUSED(appId);
-+    UNUSED(flags);
-+    UNUSED(msg);
-+}
-+#endif /* (defined(REPORT_EVENTS) && ... */
-+
-+
-+uint32_t XX_DisableAllIntr(void)
-+{
-+    unsigned long flags;
-+
-+#ifdef local_irq_save_nort
-+    local_irq_save_nort(flags);
-+#else
-+    local_irq_save(flags);
-+#endif
-+
-+    return (uint32_t)flags;
-+}
-+
-+void XX_RestoreAllIntr(uint32_t flags)
-+{
-+#ifdef local_irq_restore_nort
-+    local_irq_restore_nort((unsigned long)flags);
-+#else
-+    local_irq_restore((unsigned long)flags);
-+#endif
-+}
-+
-+t_Error XX_Call( uint32_t qid, t_Error (* f)(t_Handle), t_Handle id, t_Handle appId, uint16_t flags )
-+{
-+    UNUSED(qid);
-+    UNUSED(appId);
-+    UNUSED(flags);
-+
-+    return f(id);
-+}
-+
-+int XX_IsICacheEnable(void)
-+{
-+    return TRUE;
-+}
-+
-+int XX_IsDCacheEnable(void)
-+{
-+    return TRUE;
-+}
-+
-+
-+typedef struct {
-+    t_Isr       *f_Isr;
-+    t_Handle    handle;
-+} t_InterruptHandler;
-+
-+
-+t_Handle interruptHandlers[0x00010000];
-+
-+static irqreturn_t LinuxInterruptHandler (int irq, void *dev_id)
-+{
-+    t_InterruptHandler *p_IntrHndl = (t_InterruptHandler *)dev_id;
-+    p_IntrHndl->f_Isr(p_IntrHndl->handle);
-+    return IRQ_HANDLED;
-+}
-+
-+t_Error XX_SetIntr(int irq, t_Isr *f_Isr, t_Handle handle)
-+{
-+    const char *device;
-+    t_InterruptHandler *p_IntrHndl;
-+
-+    device = GetDeviceName(irq);
-+    if (device == NULL)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Interrupt source - %d", irq));
-+
-+    p_IntrHndl = (t_InterruptHandler *)XX_Malloc(sizeof(t_InterruptHandler));
-+    if (p_IntrHndl == NULL)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+    p_IntrHndl->f_Isr = f_Isr;
-+    p_IntrHndl->handle = handle;
-+    interruptHandlers[irq] = p_IntrHndl;
-+
-+    if (request_irq(GetDeviceIrqNum(irq), LinuxInterruptHandler, 0, device, p_IntrHndl) < 0)
-+        RETURN_ERROR(MAJOR, E_BUSY, ("Can't get IRQ %s\n", device));
-+    disable_irq(GetDeviceIrqNum(irq));
-+
-+    return E_OK;
-+}
-+
-+t_Error XX_FreeIntr(int irq)
-+{
-+    t_InterruptHandler *p_IntrHndl = interruptHandlers[irq];
-+    free_irq(GetDeviceIrqNum(irq), p_IntrHndl);
-+    XX_Free(p_IntrHndl);
-+    interruptHandlers[irq] = 0;
-+    return E_OK;
-+}
-+
-+t_Error XX_EnableIntr(int irq)
-+{
-+    enable_irq(GetDeviceIrqNum(irq));
-+    return E_OK;
-+}
-+
-+t_Error XX_DisableIntr(int irq)
-+{
-+    disable_irq(GetDeviceIrqNum(irq));
-+    return E_OK;
-+}
-+
-+
-+/*****************************************************************************/
-+/*                       Tasklet Service Routines                            */
-+/*****************************************************************************/
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+typedef struct
-+{
-+    t_Handle            h_Data;
-+    void                (*f_Callback) (void *);
-+    struct delayed_work dwork;
-+} t_Tasklet;
-+
-+static void GenericTaskletCallback(struct work_struct *p_Work)
-+{
-+    t_Tasklet *p_Task = container_of(p_Work, t_Tasklet, dwork.work);
-+
-+    p_Task->f_Callback(p_Task->h_Data);
-+}
-+#endif    /* LINUX_VERSION_CODE */
-+
-+
-+t_TaskletHandle XX_InitTasklet (void (*routine)(void *), void *data)
-+{
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+    struct work_struct *p_Task;
-+    p_Task = (struct work_struct *)XX_Malloc(sizeof(struct work_struct));
-+    INIT_WORK(p_Task, routine, data);
-+#else
-+    t_Tasklet *p_Task = (t_Tasklet *)XX_Malloc(sizeof(t_Tasklet));
-+    p_Task->h_Data = data;
-+    p_Task->f_Callback = routine;
-+    INIT_DELAYED_WORK(&p_Task->dwork, GenericTaskletCallback);
-+#endif    /* LINUX_VERSION_CODE */
-+
-+    return (t_TaskletHandle)p_Task;
-+}
-+
-+
-+void XX_FreeTasklet (t_TaskletHandle h_Tasklet)
-+{
-+    if (h_Tasklet)
-+        XX_Free(h_Tasklet);
-+}
-+
-+int XX_ScheduleTask(t_TaskletHandle h_Tasklet, int immediate)
-+{
-+    int ans;
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+    if (immediate)
-+        ans = schedule_work(h_Tasklet);
-+    else
-+        ans = schedule_delayed_work(h_Tasklet, 1);
-+#else
-+    if (immediate)
-+        ans = schedule_delayed_work(&((t_Tasklet *)h_Tasklet)->dwork, 0);
-+    else
-+        ans = schedule_delayed_work(&((t_Tasklet *)h_Tasklet)->dwork, HZ);
-+#endif /* LINUX_VERSION_CODE */
-+
-+    return ans;
-+}
-+
-+void XX_FlushScheduledTasks(void)
-+{
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-+    flush_scheduled_tasks();
-+#else
-+    flush_scheduled_work();
-+#endif    /* LINUX_VERSION_CODE */
-+}
-+
-+int XX_TaskletIsQueued(t_TaskletHandle h_Tasklet)
-+{
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+    return (int)(((struct work_struct *)h_Tasklet)->pending);
-+#else
-+    return (int)delayed_work_pending(&((t_Tasklet *)h_Tasklet)->dwork);
-+#endif    /* LINUX_VERSION_CODE */
-+}
-+
-+void XX_SetTaskletData(t_TaskletHandle h_Tasklet, t_Handle data)
-+{
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-+    ((struct tq_struct *)h_Tasklet)->data = data;
-+#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+    ((struct work_struct *)h_Tasklet)->data = data;
-+#else
-+    ((t_Tasklet *)h_Tasklet)->h_Data = data;
-+#endif    /* LINUX_VERSION_CODE */
-+}
-+
-+t_Handle XX_GetTaskletData(t_TaskletHandle h_Tasklet)
-+{
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+    return (t_Handle)(((struct work_struct *)h_Tasklet)->data);
-+#else
-+    return ((t_Tasklet *)h_Tasklet)->h_Data;
-+#endif    /* LINUX_VERSION_CODE */
-+}
-+
-+
-+/*****************************************************************************/
-+/*                         Spinlock Service Routines                         */
-+/*****************************************************************************/
-+
-+t_Handle XX_InitSpinlock(void)
-+{
-+    spinlock_t *p_Spinlock = (spinlock_t *)XX_Malloc(sizeof(spinlock_t));
-+    if (!p_Spinlock)
-+        return NULL;
-+
-+    spin_lock_init(p_Spinlock);
-+
-+    return (t_Handle)p_Spinlock;
-+}
-+
-+void XX_FreeSpinlock(t_Handle h_Spinlock)
-+{
-+    if (h_Spinlock)
-+        XX_Free(h_Spinlock);
-+}
-+
-+void XX_LockSpinlock(t_Handle h_Spinlock)
-+{
-+    spin_lock((spinlock_t *)h_Spinlock);
-+}
-+
-+void XX_UnlockSpinlock(t_Handle h_Spinlock)
-+{
-+    spin_unlock((spinlock_t *)h_Spinlock);
-+}
-+
-+uint32_t XX_LockIntrSpinlock(t_Handle h_Spinlock)
-+{
-+    unsigned long intrFlags;
-+    spin_lock_irqsave((spinlock_t *)h_Spinlock, intrFlags);
-+    return intrFlags;
-+}
-+
-+void XX_UnlockIntrSpinlock(t_Handle h_Spinlock, uint32_t intrFlags)
-+{
-+     spin_unlock_irqrestore((spinlock_t *)h_Spinlock, (unsigned long)intrFlags);
-+}
-+
-+
-+/*****************************************************************************/
-+/*                        Timers Service Routines                            */
-+/*****************************************************************************/
-+/* The time now is in mili sec. resolution */
-+uint32_t XX_CurrentTime(void)
-+{
-+    return (jiffies*1000)/HZ;
-+}
-+
-+
-+t_Handle XX_CreateTimer(void)
-+{
-+    struct timer_list *p_Timer = (struct timer_list *)XX_Malloc(sizeof(struct timer_list));
-+    if (p_Timer)
-+    {
-+        memset(p_Timer, 0, sizeof(struct timer_list));
-+        init_timer(p_Timer);
-+    }
-+    return (t_Handle)p_Timer;
-+}
-+
-+void XX_FreeTimer(t_Handle h_Timer)
-+{
-+    if (h_Timer)
-+        XX_Free(h_Timer);
-+}
-+
-+void XX_StartTimer(t_Handle h_Timer,
-+                   uint32_t msecs,
-+                   bool     periodic,
-+                   void     (*f_TimerExpired)(t_Handle),
-+                   t_Handle h_Arg)
-+{
-+    int                 tmp_jiffies = (msecs*HZ)/1000;
-+    struct timer_list   *p_Timer = (struct timer_list *)h_Timer;
-+
-+    SANITY_CHECK_RETURN((periodic == FALSE), E_NOT_SUPPORTED);
-+
-+    p_Timer->function = (void (*)(unsigned long))f_TimerExpired;
-+    p_Timer->data = (unsigned long)h_Arg;
-+    if ((msecs*HZ)%1000)
-+        tmp_jiffies++;
-+    p_Timer->expires = (jiffies + tmp_jiffies);
-+
-+    add_timer((struct timer_list *)h_Timer);
-+}
-+
-+void XX_SetTimerData(t_Handle h_Timer, t_Handle data)
-+{
-+    struct timer_list   *p_Timer = (struct timer_list *)h_Timer;
-+
-+    p_Timer->data = (unsigned long)data;
-+}
-+
-+t_Handle XX_GetTimerData(t_Handle h_Timer)
-+{
-+    struct timer_list   *p_Timer = (struct timer_list *)h_Timer;
-+
-+    return (t_Handle)p_Timer->data;
-+}
-+
-+uint32_t   XX_GetExpirationTime(t_Handle h_Timer)
-+{
-+    struct timer_list   *p_Timer = (struct timer_list *)h_Timer;
-+
-+    return (uint32_t)p_Timer->expires;
-+}
-+
-+void XX_StopTimer(t_Handle h_Timer)
-+{
-+    del_timer((struct timer_list *)h_Timer);
-+}
-+
-+void XX_ModTimer(t_Handle h_Timer, uint32_t msecs)
-+{
-+    int tmp_jiffies = (msecs*HZ)/1000;
-+
-+    if ((msecs*HZ)%1000)
-+        tmp_jiffies++;
-+    mod_timer((struct timer_list *)h_Timer, jiffies + tmp_jiffies);
-+}
-+
-+int XX_TimerIsActive(t_Handle h_Timer)
-+{
-+  return timer_pending((struct timer_list *)h_Timer);
-+}
-+
-+uint32_t XX_Sleep(uint32_t msecs)
-+{
-+    int tmp_jiffies = (msecs*HZ)/1000;
-+
-+    if ((msecs*HZ)%1000)
-+        tmp_jiffies++;
-+    return schedule_timeout(tmp_jiffies);
-+}
-+
-+/*BEWARE!!!!! UDelay routine is BUSY WAITTING!!!!!*/
-+void XX_UDelay(uint32_t usecs)
-+{
-+    udelay(usecs);
-+}
-+
-+/* TODO: verify that these are correct */
-+#define MSG_BODY_SIZE       512
-+typedef t_Error (t_MsgHandler) (t_Handle h_Mod, uint32_t msgId, uint8_t msgBody[MSG_BODY_SIZE]);
-+typedef void (t_MsgCompletionCB) (t_Handle h_Arg, uint8_t msgBody[MSG_BODY_SIZE]);
-+t_Error XX_SendMessage(char                 *p_DestAddr,
-+                       uint32_t             msgId,
-+                       uint8_t              msgBody[MSG_BODY_SIZE],
-+                       t_MsgCompletionCB    *f_CompletionCB,
-+                       t_Handle             h_CBArg);
-+
-+typedef struct {
-+    char            *p_Addr;
-+    t_MsgHandler    *f_MsgHandlerCB;
-+    t_Handle        h_Mod;
-+    t_List          node;
-+} t_MsgHndlr;
-+#define MSG_HNDLR_OBJECT(ptr)  LIST_OBJECT(ptr, t_MsgHndlr, node)
-+
-+LIST(msgHndlrList);
-+
-+static void EnqueueMsgHndlr(t_MsgHndlr *p_MsgHndlr)
-+{
-+    uint32_t   intFlags;
-+
-+    intFlags = XX_DisableAllIntr();
-+    LIST_AddToTail(&p_MsgHndlr->node, &msgHndlrList);
-+    XX_RestoreAllIntr(intFlags);
-+}
-+/* TODO: add this for multi-platform support
-+static t_MsgHndlr * DequeueMsgHndlr(void)
-+{
-+    t_MsgHndlr *p_MsgHndlr = NULL;
-+    uint32_t   intFlags;
-+
-+    intFlags = XX_DisableAllIntr();
-+    if (!LIST_IsEmpty(&msgHndlrList))
-+    {
-+        p_MsgHndlr = MSG_HNDLR_OBJECT(msgHndlrList.p_Next);
-+        LIST_DelAndInit(&p_MsgHndlr->node);
-+    }
-+    XX_RestoreAllIntr(intFlags);
-+
-+    return p_MsgHndlr;
-+}
-+*/
-+static t_MsgHndlr * FindMsgHndlr(char *p_Addr)
-+{
-+    t_MsgHndlr  *p_MsgHndlr;
-+    t_List      *p_Pos;
-+
-+    LIST_FOR_EACH(p_Pos, &msgHndlrList)
-+    {
-+        p_MsgHndlr = MSG_HNDLR_OBJECT(p_Pos);
-+        if (strstr(p_MsgHndlr->p_Addr, p_Addr))
-+            return p_MsgHndlr;
-+    }
-+
-+    return NULL;
-+}
-+
-+t_Error XX_RegisterMessageHandler   (char *p_Addr, t_MsgHandler *f_MsgHandlerCB, t_Handle h_Mod)
-+{
-+    t_MsgHndlr  *p_MsgHndlr;
-+    uint32_t    len;
-+
-+    p_MsgHndlr = (t_MsgHndlr*)XX_Malloc(sizeof(t_MsgHndlr));
-+    if (!p_MsgHndlr)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("message handler object!!!"));
-+    memset(p_MsgHndlr, 0, sizeof(t_MsgHndlr));
-+
-+    len = strlen(p_Addr);
-+    p_MsgHndlr->p_Addr = (char*)XX_Malloc(len+1);
-+    strncpy(p_MsgHndlr->p_Addr,p_Addr, (uint32_t)(len+1));
-+
-+    p_MsgHndlr->f_MsgHandlerCB = f_MsgHandlerCB;
-+    p_MsgHndlr->h_Mod = h_Mod;
-+    INIT_LIST(&p_MsgHndlr->node);
-+    EnqueueMsgHndlr(p_MsgHndlr);
-+
-+    return E_OK;
-+}
-+
-+t_Error XX_UnregisterMessageHandler (char *p_Addr)
-+{
-+    t_MsgHndlr *p_MsgHndlr = FindMsgHndlr(p_Addr);
-+    if (!p_MsgHndlr)
-+        RETURN_ERROR(MINOR, E_NO_DEVICE, ("message handler not found in list!!!"));
-+
-+    LIST_Del(&p_MsgHndlr->node);
-+    XX_Free(p_MsgHndlr->p_Addr);
-+    XX_Free(p_MsgHndlr);
-+
-+    return E_OK;
-+}
-+
-+t_Error XX_SendMessage(char                 *p_DestAddr,
-+                       uint32_t             msgId,
-+                       uint8_t              msgBody[MSG_BODY_SIZE],
-+                       t_MsgCompletionCB    *f_CompletionCB,
-+                       t_Handle             h_CBArg)
-+{
-+    t_Error     ans;
-+    t_MsgHndlr  *p_MsgHndlr = FindMsgHndlr(p_DestAddr);
-+    if (!p_MsgHndlr)
-+        RETURN_ERROR(MINOR, E_NO_DEVICE, ("message handler not found in list!!!"));
-+
-+    ans = p_MsgHndlr->f_MsgHandlerCB(p_MsgHndlr->h_Mod, msgId, msgBody);
-+
-+    if (f_CompletionCB)
-+        f_CompletionCB(h_CBArg, msgBody);
-+
-+    return ans;
-+}
-+
-+t_Error XX_IpcRegisterMsgHandler(char                   addr[XX_IPC_MAX_ADDR_NAME_LENGTH],
-+                                 t_IpcMsgHandler        *f_MsgHandler,
-+                                 t_Handle               h_Module,
-+                                 uint32_t               replyLength)
-+{
-+    UNUSED(addr);UNUSED(f_MsgHandler);UNUSED(h_Module);UNUSED(replyLength);
-+    return E_OK;
-+}
-+
-+t_Error XX_IpcUnregisterMsgHandler(char addr[XX_IPC_MAX_ADDR_NAME_LENGTH])
-+{
-+    UNUSED(addr);
-+    return E_OK;
-+}
-+
-+
-+t_Error XX_IpcSendMessage(t_Handle           h_Session,
-+                          uint8_t            *p_Msg,
-+                          uint32_t           msgLength,
-+                          uint8_t            *p_Reply,
-+                          uint32_t           *p_ReplyLength,
-+                          t_IpcMsgCompletion *f_Completion,
-+                          t_Handle           h_Arg)
-+{
-+    UNUSED(h_Session); UNUSED(p_Msg); UNUSED(msgLength); UNUSED(p_Reply);
-+    UNUSED(p_ReplyLength); UNUSED(f_Completion); UNUSED(h_Arg);
-+    return E_OK;
-+}
-+
-+t_Handle XX_IpcInitSession(char destAddr[XX_IPC_MAX_ADDR_NAME_LENGTH],
-+                           char srcAddr[XX_IPC_MAX_ADDR_NAME_LENGTH])
-+{
-+    UNUSED(destAddr); UNUSED(srcAddr);
-+    return E_OK;
-+}
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22)
-+int GetDeviceIrqNum(int irq)
-+{
-+    struct device_node  *iPar;
-+    struct irq_domain   *irqHost;
-+    uint32_t            hwIrq;
-+
-+    /* Get the interrupt controller */
-+    iPar = of_find_node_by_name(NULL, "mpic");
-+    hwIrq = 0;
-+
-+    ASSERT_COND(iPar != NULL);
-+    /* Get the irq host */
-+    irqHost = irq_find_host(iPar);
-+    of_node_put(iPar);
-+
-+    /* Create irq mapping */
-+    return irq_create_mapping(irqHost, hwIrq);
-+}
-+#else
-+#error "kernel not supported!!!"
-+#endif    /* LINUX_VERSION_CODE */
-+
-+void * XX_PhysToVirt(physAddress_t addr)
-+{
-+    return UINT_TO_PTR(SYS_PhysToVirt((uint64_t)addr));
-+}
-+
-+physAddress_t XX_VirtToPhys(void * addr)
-+{
-+    return (physAddress_t)SYS_VirtToPhys(PTR_TO_UINT(addr));
-+}
-+
-+void * xx_MallocSmart(uint32_t size, int memPartitionId, uint32_t alignment)
-+{
-+    uintptr_t   *returnCode, tmp;
-+
-+    if (alignment < sizeof(uintptr_t))
-+        alignment = sizeof(uintptr_t);
-+    size += alignment + sizeof(returnCode);
-+    tmp = (uintptr_t)xx_Malloc(size);
-+    if (tmp == 0)
-+        return NULL;
-+    returnCode = (uintptr_t*)((tmp + alignment + sizeof(returnCode)) & ~((uintptr_t)alignment - 1));
-+    *(returnCode - 1) = tmp;
-+
-+    return (void*)returnCode;
-+}
-+
-+void xx_FreeSmart(void *p)
-+{
-+    xx_Free((void*)(*((uintptr_t *)(p) - 1)));
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/xx/xx_linux.c
-@@ -0,0 +1,918 @@
-+/*
-+ * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**************************************************************************//**
-+ @File          xx_linux.c
-+
-+ @Description   XX routines implementation for Linux.
-+*//***************************************************************************/
-+#include <linux/version.h>
-+
-+#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
-+#define MODVERSIONS
-+#endif
-+#ifdef MODVERSIONS
-+#include <config/modversions.h>
-+#endif /* MODVERSIONS */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/string.h>
-+#include <linux/ptrace.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/fs.h>
-+#include <linux/vmalloc.h>
-+#include <linux/init.h>
-+#include <linux/timer.h>
-+#include <linux/spinlock.h>
-+#include <linux/delay.h>
-+#include <linux/proc_fs.h>
-+#include <linux/smp.h>
-+#include <linux/of.h>
-+#ifdef CONFIG_FMAN_ARM
-+#include <linux/irqdomain.h>
-+#endif
-+
-+#include <linux/workqueue.h>
-+
-+#ifdef BIGPHYSAREA_ENABLE
-+#include <linux/bigphysarea.h>
-+#endif /* BIGPHYSAREA_ENABLE */
-+
-+#ifndef CONFIG_FMAN_ARM
-+#include <sysdev/fsl_soc.h>
-+#endif
-+#include <asm/pgtable.h>
-+#include <asm/irq.h>
-+#include <asm/bitops.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <asm/atomic.h>
-+#include <asm/string.h>
-+#include <asm/byteorder.h>
-+#include <asm/page.h>
-+
-+#include "error_ext.h"
-+#include "std_ext.h"
-+#include "list_ext.h"
-+#include "mm_ext.h"
-+#include "sys_io_ext.h"
-+#include "xx.h"
-+
-+
-+#define __ERR_MODULE__      MODULE_UNKNOWN
-+
-+#ifdef BIGPHYSAREA_ENABLE
-+#define MAX_ALLOCATION_SIZE     128 * 1024 /* Maximum size allocated with kmalloc is 128K */
-+
-+
-+/* TODO: large allocations => use big phys area */
-+/******************************************************************************
-+ * routine:     get_nr_pages
-+ *
-+ * description:
-+ *     calculates the number of memory pages for a given size (in bytes)
-+ *
-+ * arguments:
-+ *     size       - the number of bytes
-+ *
-+ * return code:
-+ *     The number of pages
-+ *
-+ *****************************************************************************/
-+static __inline__ uint32_t get_nr_pages (uint32_t size)
-+{
-+    return (uint32_t)((size >> PAGE_SHIFT) + (size & PAGE_SHIFT ? 1 : 0));
-+}
-+
-+static bool in_big_phys_area (uint32_t addr)
-+{
-+    uint32_t base, size;
-+
-+    bigphysarea_get_details (&base, &size);
-+    return ((addr >= base) && (addr < base + size));
-+}
-+#endif /* BIGPHYSAREA_ENABLE */
-+
-+void * xx_Malloc(uint32_t n)
-+{
-+    void        *a;
-+    uint32_t    flags;
-+
-+    flags = XX_DisableAllIntr();
-+#ifdef BIGPHYSAREA_ENABLE
-+    if (n >= MAX_ALLOCATION_SIZE)
-+        a = (void*)bigphysarea_alloc_pages(get_nr_pages(n), 0, GFP_ATOMIC);
-+    else
-+#endif /* BIGPHYSAREA_ENABLE */
-+    a = (void *)kmalloc((uint32_t)n, GFP_ATOMIC);
-+    if (!a)
-+        XX_Print("No memory for XX_Malloc\n");
-+    XX_RestoreAllIntr(flags);
-+
-+    return a;
-+}
-+
-+void xx_Free(void *p)
-+{
-+#ifdef BIGPHYSAREA_ENABLE
-+    if (in_big_phys_area ((uint32_t)p))
-+        bigphysarea_free_pages(p);
-+    else
-+#endif /* BIGPHYSAREA_ENABLE */
-+    kfree(p);
-+}
-+
-+void XX_Exit(int status)
-+{
-+    WARN(1, "\n\nFMD: fatal error, driver can't go on!!!\n\n");
-+}
-+
-+#define BUF_SIZE    512
-+void XX_Print(char *str, ...)
-+{
-+    va_list args;
-+#ifdef CONFIG_SMP
-+    char buf[BUF_SIZE];
-+#endif /* CONFIG_SMP */
-+
-+    va_start(args, str);
-+#ifdef CONFIG_SMP
-+    if (vsnprintf (buf, BUF_SIZE, str, args) >= BUF_SIZE)
-+        printk(KERN_WARNING "Illegal string to print!\n    more than %d characters.\n\tString was not printed completelly.\n", BUF_SIZE);
-+    printk(KERN_CRIT "cpu%d/%d: %s", raw_smp_processor_id(), NR_CPUS, buf);
-+#else
-+    vprintk(str, args);
-+#endif /* CONFIG_SMP */
-+    va_end(args);
-+}
-+
-+void XX_Fprint(void *file, char *str, ...)
-+{
-+    va_list args;
-+#ifdef CONFIG_SMP
-+    char buf[BUF_SIZE];
-+#endif /* CONFIG_SMP */
-+
-+    va_start(args, str);
-+#ifdef CONFIG_SMP
-+    if (vsnprintf (buf, BUF_SIZE, str, args) >= BUF_SIZE)
-+        printk(KERN_WARNING "Illegal string to print!\n    more than %d characters.\n\tString was not printed completelly.\n", BUF_SIZE);
-+    printk (KERN_CRIT "cpu%d/%d: %s", raw_smp_processor_id(), NR_CPUS, buf);
-+
-+#else
-+    vprintk(str, args);
-+#endif /* CONFIG_SMP */
-+    va_end(args);
-+}
-+
-+#ifdef DEBUG_XX_MALLOC
-+typedef void (*t_ffn)(void *);
-+typedef struct {
-+    t_ffn       f_free;
-+    void        *mem;
-+    char        *fname;
-+    int         fline;
-+    uint32_t    size;
-+    t_List      node;
-+} t_MemDebug;
-+#define MEMDBG_OBJECT(p_List) LIST_OBJECT(p_List, t_MemDebug, node)
-+
-+LIST(memDbgLst);
-+
-+
-+void * XX_MallocDebug(uint32_t size, char *fname, int line)
-+{
-+    void       *mem;
-+    t_MemDebug *p_MemDbg;
-+
-+    p_MemDbg = (t_MemDebug *)xx_Malloc(sizeof(t_MemDebug));
-+    if (p_MemDbg == NULL)
-+        return NULL;
-+
-+    mem = xx_Malloc(size);
-+    if (mem == NULL)
-+    {
-+        XX_Free(p_MemDbg);
-+        return NULL;
-+    }
-+
-+    INIT_LIST(&p_MemDbg->node);
-+    p_MemDbg->f_free = xx_Free;
-+    p_MemDbg->mem    = mem;
-+    p_MemDbg->fname  = fname;
-+    p_MemDbg->fline  = line;
-+    p_MemDbg->size   = size+sizeof(t_MemDebug);
-+    LIST_AddToTail(&p_MemDbg->node, &memDbgLst);
-+
-+    return mem;
-+}
-+
-+void * XX_MallocSmartDebug(uint32_t size,
-+                           int      memPartitionId,
-+                           uint32_t align,
-+                           char     *fname,
-+                           int      line)
-+{
-+    void       *mem;
-+    t_MemDebug *p_MemDbg;
-+
-+    p_MemDbg = (t_MemDebug *)XX_Malloc(sizeof(t_MemDebug));
-+    if (p_MemDbg == NULL)
-+        return NULL;
-+
-+    mem = xx_MallocSmart((uint32_t)size, memPartitionId, align);
-+    if (mem == NULL)
-+    {
-+        XX_Free(p_MemDbg);
-+        return NULL;
-+    }
-+
-+    INIT_LIST(&p_MemDbg->node);
-+    p_MemDbg->f_free = xx_FreeSmart;
-+    p_MemDbg->mem    = mem;
-+    p_MemDbg->fname  = fname;
-+    p_MemDbg->fline  = line;
-+    p_MemDbg->size   = size+sizeof(t_MemDebug);
-+    LIST_AddToTail(&p_MemDbg->node, &memDbgLst);
-+
-+    return mem;
-+}
-+
-+static void debug_free(void *mem)
-+{
-+    t_List      *p_MemDbgLh = NULL;
-+    t_MemDebug  *p_MemDbg;
-+    bool        found = FALSE;
-+
-+    if (LIST_IsEmpty(&memDbgLst))
-+    {
-+        REPORT_ERROR(MAJOR, E_ALREADY_FREE, ("Unbalanced free (0x%08x)", mem));
-+        return;
-+    }
-+
-+    LIST_FOR_EACH(p_MemDbgLh, &memDbgLst)
-+    {
-+        p_MemDbg = MEMDBG_OBJECT(p_MemDbgLh);
-+        if (p_MemDbg->mem == mem)
-+        {
-+            found = TRUE;
-+            break;
-+        }
-+    }
-+
-+    if (!found)
-+    {
-+        REPORT_ERROR(MAJOR, E_NOT_FOUND,
-+                     ("Attempt to free unallocated address (0x%08x)",mem));
-+        dump_stack();
-+        return;
-+    }
-+
-+    LIST_Del(p_MemDbgLh);
-+    p_MemDbg->f_free(mem);
-+    p_MemDbg->f_free(p_MemDbg);
-+}
-+
-+void XX_FreeSmart(void *p)
-+{
-+    debug_free(p);
-+}
-+
-+
-+void XX_Free(void *p)
-+{
-+    debug_free(p);
-+}
-+
-+#else /* not DEBUG_XX_MALLOC */
-+void * XX_Malloc(uint32_t size)
-+{
-+    return xx_Malloc(size);
-+}
-+
-+void * XX_MallocSmart(uint32_t size, int memPartitionId, uint32_t alignment)
-+{
-+    return xx_MallocSmart(size,memPartitionId, alignment);
-+}
-+
-+void XX_FreeSmart(void *p)
-+{
-+    xx_FreeSmart(p);
-+}
-+
-+
-+void XX_Free(void *p)
-+{
-+    xx_Free(p);
-+}
-+#endif /* not DEBUG_XX_MALLOC */
-+
-+
-+#if (defined(REPORT_EVENTS) && (REPORT_EVENTS > 0))
-+void XX_EventById(uint32_t event, t_Handle appId, uint16_t flags, char *msg)
-+{
-+    e_Event eventCode = (e_Event)event;
-+
-+    UNUSED(eventCode);
-+    UNUSED(appId);
-+    UNUSED(flags);
-+    UNUSED(msg);
-+}
-+#endif /* (defined(REPORT_EVENTS) && ... */
-+
-+
-+uint32_t XX_DisableAllIntr(void)
-+{
-+    unsigned long flags;
-+
-+#ifdef local_irq_save_nort
-+    local_irq_save_nort(flags);
-+#else
-+    local_irq_save(flags);
-+#endif
-+
-+    return (uint32_t)flags;
-+}
-+
-+void XX_RestoreAllIntr(uint32_t flags)
-+{
-+#ifdef local_irq_restore_nort
-+    local_irq_restore_nort((unsigned long)flags);
-+#else
-+    local_irq_restore((unsigned long)flags);
-+#endif
-+}
-+
-+t_Error XX_Call( uint32_t qid, t_Error (* f)(t_Handle), t_Handle id, t_Handle appId, uint16_t flags )
-+{
-+    UNUSED(qid);
-+    UNUSED(appId);
-+    UNUSED(flags);
-+
-+    return f(id);
-+}
-+
-+int XX_IsICacheEnable(void)
-+{
-+    return TRUE;
-+}
-+
-+int XX_IsDCacheEnable(void)
-+{
-+    return TRUE;
-+}
-+
-+
-+typedef struct {
-+    t_Isr       *f_Isr;
-+    t_Handle    handle;
-+} t_InterruptHandler;
-+
-+
-+t_Handle interruptHandlers[0x00010000];
-+
-+#ifdef CONFIG_FMAN_ARM
-+static irqreturn_t LinuxInterruptHandler (int irq, void *dev_id)
-+{
-+    t_InterruptHandler *p_IntrHndl = (t_InterruptHandler *)dev_id;
-+    p_IntrHndl->f_Isr(p_IntrHndl->handle);
-+    return IRQ_HANDLED;
-+}
-+#endif
-+
-+t_Error XX_SetIntr(int irq, t_Isr *f_Isr, t_Handle handle)
-+{
-+#ifdef CONFIG_FMAN_ARM
-+    const char *device;
-+    t_InterruptHandler *p_IntrHndl;
-+
-+    device = GetDeviceName(irq);
-+    if (device == NULL)
-+        RETURN_ERROR(MAJOR, E_INVALID_VALUE, ("Interrupt source - %d", irq));
-+
-+    p_IntrHndl = (t_InterruptHandler *)XX_Malloc(sizeof(t_InterruptHandler));
-+    if (p_IntrHndl == NULL)
-+        RETURN_ERROR(MAJOR, E_NO_MEMORY, NO_MSG);
-+    p_IntrHndl->f_Isr = f_Isr;
-+    p_IntrHndl->handle = handle;
-+    interruptHandlers[irq] = p_IntrHndl;
-+
-+    if (request_irq(GetDeviceIrqNum(irq), LinuxInterruptHandler, 0, device, p_IntrHndl) < 0)
-+        RETURN_ERROR(MAJOR, E_BUSY, ("Can't get IRQ %s\n", device));
-+    disable_irq(GetDeviceIrqNum(irq));
-+#endif
-+    return E_OK;
-+}
-+
-+t_Error XX_FreeIntr(int irq)
-+{
-+    t_InterruptHandler *p_IntrHndl = interruptHandlers[irq];
-+    free_irq(GetDeviceIrqNum(irq), p_IntrHndl);
-+    XX_Free(p_IntrHndl);
-+    interruptHandlers[irq] = 0;
-+    return E_OK;
-+}
-+
-+t_Error XX_EnableIntr(int irq)
-+{
-+    enable_irq(GetDeviceIrqNum(irq));
-+    return E_OK;
-+}
-+
-+t_Error XX_DisableIntr(int irq)
-+{
-+    disable_irq(GetDeviceIrqNum(irq));
-+    return E_OK;
-+}
-+
-+
-+/*****************************************************************************/
-+/*                       Tasklet Service Routines                            */
-+/*****************************************************************************/
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+typedef struct
-+{
-+    t_Handle            h_Data;
-+    void                (*f_Callback) (void *);
-+    struct delayed_work dwork;
-+} t_Tasklet;
-+
-+static void GenericTaskletCallback(struct work_struct *p_Work)
-+{
-+    t_Tasklet *p_Task = container_of(p_Work, t_Tasklet, dwork.work);
-+
-+    p_Task->f_Callback(p_Task->h_Data);
-+}
-+#endif    /* LINUX_VERSION_CODE */
-+
-+
-+t_TaskletHandle XX_InitTasklet (void (*routine)(void *), void *data)
-+{
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+    struct work_struct *p_Task;
-+    p_Task = (struct work_struct *)XX_Malloc(sizeof(struct work_struct));
-+    INIT_WORK(p_Task, routine, data);
-+#else
-+    t_Tasklet *p_Task = (t_Tasklet *)XX_Malloc(sizeof(t_Tasklet));
-+    p_Task->h_Data = data;
-+    p_Task->f_Callback = routine;
-+    INIT_DELAYED_WORK(&p_Task->dwork, GenericTaskletCallback);
-+#endif    /* LINUX_VERSION_CODE */
-+
-+    return (t_TaskletHandle)p_Task;
-+}
-+
-+
-+void XX_FreeTasklet (t_TaskletHandle h_Tasklet)
-+{
-+    if (h_Tasklet)
-+        XX_Free(h_Tasklet);
-+}
-+
-+int XX_ScheduleTask(t_TaskletHandle h_Tasklet, int immediate)
-+{
-+    int ans;
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+    if (immediate)
-+        ans = schedule_work(h_Tasklet);
-+    else
-+        ans = schedule_delayed_work(h_Tasklet, 1);
-+#else
-+    if (immediate)
-+        ans = schedule_delayed_work(&((t_Tasklet *)h_Tasklet)->dwork, 0);
-+    else
-+        ans = schedule_delayed_work(&((t_Tasklet *)h_Tasklet)->dwork, HZ);
-+#endif /* LINUX_VERSION_CODE */
-+
-+    return ans;
-+}
-+
-+void XX_FlushScheduledTasks(void)
-+{
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-+    flush_scheduled_tasks();
-+#else
-+    flush_scheduled_work();
-+#endif    /* LINUX_VERSION_CODE */
-+}
-+
-+int XX_TaskletIsQueued(t_TaskletHandle h_Tasklet)
-+{
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+    return (int)(((struct work_struct *)h_Tasklet)->pending);
-+#else
-+    return (int)delayed_work_pending(&((t_Tasklet *)h_Tasklet)->dwork);
-+#endif    /* LINUX_VERSION_CODE */
-+}
-+
-+void XX_SetTaskletData(t_TaskletHandle h_Tasklet, t_Handle data)
-+{
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-+    ((struct tq_struct *)h_Tasklet)->data = data;
-+#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+    ((struct work_struct *)h_Tasklet)->data = data;
-+#else
-+    ((t_Tasklet *)h_Tasklet)->h_Data = data;
-+#endif    /* LINUX_VERSION_CODE */
-+}
-+
-+t_Handle XX_GetTaskletData(t_TaskletHandle h_Tasklet)
-+{
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+    return (t_Handle)(((struct work_struct *)h_Tasklet)->data);
-+#else
-+    return ((t_Tasklet *)h_Tasklet)->h_Data;
-+#endif    /* LINUX_VERSION_CODE */
-+}
-+
-+
-+/*****************************************************************************/
-+/*                         Spinlock Service Routines                         */
-+/*****************************************************************************/
-+
-+t_Handle XX_InitSpinlock(void)
-+{
-+    spinlock_t *p_Spinlock = (spinlock_t *)XX_Malloc(sizeof(spinlock_t));
-+    if (!p_Spinlock)
-+        return NULL;
-+
-+    spin_lock_init(p_Spinlock);
-+
-+    return (t_Handle)p_Spinlock;
-+}
-+
-+void XX_FreeSpinlock(t_Handle h_Spinlock)
-+{
-+    if (h_Spinlock)
-+        XX_Free(h_Spinlock);
-+}
-+
-+void XX_LockSpinlock(t_Handle h_Spinlock)
-+{
-+    spin_lock((spinlock_t *)h_Spinlock);
-+}
-+
-+void XX_UnlockSpinlock(t_Handle h_Spinlock)
-+{
-+    spin_unlock((spinlock_t *)h_Spinlock);
-+}
-+
-+uint32_t XX_LockIntrSpinlock(t_Handle h_Spinlock)
-+{
-+    unsigned long intrFlags;
-+    spin_lock_irqsave((spinlock_t *)h_Spinlock, intrFlags);
-+    return intrFlags;
-+}
-+
-+void XX_UnlockIntrSpinlock(t_Handle h_Spinlock, uint32_t intrFlags)
-+{
-+     spin_unlock_irqrestore((spinlock_t *)h_Spinlock, (unsigned long)intrFlags);
-+}
-+
-+
-+/*****************************************************************************/
-+/*                        Timers Service Routines                            */
-+/*****************************************************************************/
-+/* The time now is in mili sec. resolution */
-+uint32_t XX_CurrentTime(void)
-+{
-+    return (jiffies*1000)/HZ;
-+}
-+
-+
-+t_Handle XX_CreateTimer(void)
-+{
-+    struct timer_list *p_Timer = (struct timer_list *)XX_Malloc(sizeof(struct timer_list));
-+    if (p_Timer)
-+    {
-+        memset(p_Timer, 0, sizeof(struct timer_list));
-+        init_timer(p_Timer);
-+    }
-+    return (t_Handle)p_Timer;
-+}
-+
-+void XX_FreeTimer(t_Handle h_Timer)
-+{
-+    if (h_Timer)
-+        XX_Free(h_Timer);
-+}
-+
-+void XX_StartTimer(t_Handle h_Timer,
-+                   uint32_t msecs,
-+                   bool     periodic,
-+                   void     (*f_TimerExpired)(t_Handle),
-+                   t_Handle h_Arg)
-+{
-+    int                 tmp_jiffies = (msecs*HZ)/1000;
-+    struct timer_list   *p_Timer = (struct timer_list *)h_Timer;
-+
-+    SANITY_CHECK_RETURN((periodic == FALSE), E_NOT_SUPPORTED);
-+
-+    p_Timer->function = (void (*)(unsigned long))f_TimerExpired;
-+    p_Timer->data = (unsigned long)h_Arg;
-+    if ((msecs*HZ)%1000)
-+        tmp_jiffies++;
-+    p_Timer->expires = (jiffies + tmp_jiffies);
-+
-+    add_timer((struct timer_list *)h_Timer);
-+}
-+
-+void XX_SetTimerData(t_Handle h_Timer, t_Handle data)
-+{
-+    struct timer_list   *p_Timer = (struct timer_list *)h_Timer;
-+
-+    p_Timer->data = (unsigned long)data;
-+}
-+
-+t_Handle XX_GetTimerData(t_Handle h_Timer)
-+{
-+    struct timer_list   *p_Timer = (struct timer_list *)h_Timer;
-+
-+    return (t_Handle)p_Timer->data;
-+}
-+
-+uint32_t   XX_GetExpirationTime(t_Handle h_Timer)
-+{
-+    struct timer_list   *p_Timer = (struct timer_list *)h_Timer;
-+
-+    return (uint32_t)p_Timer->expires;
-+}
-+
-+void XX_StopTimer(t_Handle h_Timer)
-+{
-+    del_timer((struct timer_list *)h_Timer);
-+}
-+
-+void XX_ModTimer(t_Handle h_Timer, uint32_t msecs)
-+{
-+    int tmp_jiffies = (msecs*HZ)/1000;
-+
-+    if ((msecs*HZ)%1000)
-+        tmp_jiffies++;
-+    mod_timer((struct timer_list *)h_Timer, jiffies + tmp_jiffies);
-+}
-+
-+int XX_TimerIsActive(t_Handle h_Timer)
-+{
-+  return timer_pending((struct timer_list *)h_Timer);
-+}
-+
-+uint32_t XX_Sleep(uint32_t msecs)
-+{
-+    int tmp_jiffies = (msecs*HZ)/1000;
-+
-+    if ((msecs*HZ)%1000)
-+        tmp_jiffies++;
-+    return schedule_timeout(tmp_jiffies);
-+}
-+
-+/*BEWARE!!!!! UDelay routine is BUSY WAITTING!!!!!*/
-+void XX_UDelay(uint32_t usecs)
-+{
-+    udelay(usecs);
-+}
-+
-+/* TODO: verify that these are correct */
-+#define MSG_BODY_SIZE       512
-+typedef t_Error (t_MsgHandler) (t_Handle h_Mod, uint32_t msgId, uint8_t msgBody[MSG_BODY_SIZE]);
-+typedef void (t_MsgCompletionCB) (t_Handle h_Arg, uint8_t msgBody[MSG_BODY_SIZE]);
-+t_Error XX_SendMessage(char                 *p_DestAddr,
-+                       uint32_t             msgId,
-+                       uint8_t              msgBody[MSG_BODY_SIZE],
-+                       t_MsgCompletionCB    *f_CompletionCB,
-+                       t_Handle             h_CBArg);
-+
-+typedef struct {
-+    char            *p_Addr;
-+    t_MsgHandler    *f_MsgHandlerCB;
-+    t_Handle        h_Mod;
-+    t_List          node;
-+} t_MsgHndlr;
-+#define MSG_HNDLR_OBJECT(ptr)  LIST_OBJECT(ptr, t_MsgHndlr, node)
-+
-+LIST(msgHndlrList);
-+
-+static void EnqueueMsgHndlr(t_MsgHndlr *p_MsgHndlr)
-+{
-+    uint32_t   intFlags;
-+
-+    intFlags = XX_DisableAllIntr();
-+    LIST_AddToTail(&p_MsgHndlr->node, &msgHndlrList);
-+    XX_RestoreAllIntr(intFlags);
-+}
-+/* TODO: add this for multi-platform support
-+static t_MsgHndlr * DequeueMsgHndlr(void)
-+{
-+    t_MsgHndlr *p_MsgHndlr = NULL;
-+    uint32_t   intFlags;
-+
-+    intFlags = XX_DisableAllIntr();
-+    if (!LIST_IsEmpty(&msgHndlrList))
-+    {
-+        p_MsgHndlr = MSG_HNDLR_OBJECT(msgHndlrList.p_Next);
-+        LIST_DelAndInit(&p_MsgHndlr->node);
-+    }
-+    XX_RestoreAllIntr(intFlags);
-+
-+    return p_MsgHndlr;
-+}
-+*/
-+static t_MsgHndlr * FindMsgHndlr(char *p_Addr)
-+{
-+    t_MsgHndlr  *p_MsgHndlr;
-+    t_List      *p_Pos;
-+
-+    LIST_FOR_EACH(p_Pos, &msgHndlrList)
-+    {
-+        p_MsgHndlr = MSG_HNDLR_OBJECT(p_Pos);
-+        if (strstr(p_MsgHndlr->p_Addr, p_Addr))
-+            return p_MsgHndlr;
-+    }
-+
-+    return NULL;
-+}
-+
-+t_Error XX_RegisterMessageHandler   (char *p_Addr, t_MsgHandler *f_MsgHandlerCB, t_Handle h_Mod)
-+{
-+    t_MsgHndlr  *p_MsgHndlr;
-+    uint32_t    len;
-+
-+    p_MsgHndlr = (t_MsgHndlr*)XX_Malloc(sizeof(t_MsgHndlr));
-+    if (!p_MsgHndlr)
-+        RETURN_ERROR(MINOR, E_NO_MEMORY, ("message handler object!!!"));
-+    memset(p_MsgHndlr, 0, sizeof(t_MsgHndlr));
-+
-+    len = strlen(p_Addr);
-+    p_MsgHndlr->p_Addr = (char*)XX_Malloc(len+1);
-+    strncpy(p_MsgHndlr->p_Addr,p_Addr, (uint32_t)(len+1));
-+
-+    p_MsgHndlr->f_MsgHandlerCB = f_MsgHandlerCB;
-+    p_MsgHndlr->h_Mod = h_Mod;
-+    INIT_LIST(&p_MsgHndlr->node);
-+    EnqueueMsgHndlr(p_MsgHndlr);
-+
-+    return E_OK;
-+}
-+
-+t_Error XX_UnregisterMessageHandler (char *p_Addr)
-+{
-+    t_MsgHndlr *p_MsgHndlr = FindMsgHndlr(p_Addr);
-+    if (!p_MsgHndlr)
-+        RETURN_ERROR(MINOR, E_NO_DEVICE, ("message handler not found in list!!!"));
-+
-+    LIST_Del(&p_MsgHndlr->node);
-+    XX_Free(p_MsgHndlr->p_Addr);
-+    XX_Free(p_MsgHndlr);
-+
-+    return E_OK;
-+}
-+
-+t_Error XX_SendMessage(char                 *p_DestAddr,
-+                       uint32_t             msgId,
-+                       uint8_t              msgBody[MSG_BODY_SIZE],
-+                       t_MsgCompletionCB    *f_CompletionCB,
-+                       t_Handle             h_CBArg)
-+{
-+    t_Error     ans;
-+    t_MsgHndlr  *p_MsgHndlr = FindMsgHndlr(p_DestAddr);
-+    if (!p_MsgHndlr)
-+        RETURN_ERROR(MINOR, E_NO_DEVICE, ("message handler not found in list!!!"));
-+
-+    ans = p_MsgHndlr->f_MsgHandlerCB(p_MsgHndlr->h_Mod, msgId, msgBody);
-+
-+    if (f_CompletionCB)
-+        f_CompletionCB(h_CBArg, msgBody);
-+
-+    return ans;
-+}
-+
-+t_Error XX_IpcRegisterMsgHandler(char                   addr[XX_IPC_MAX_ADDR_NAME_LENGTH],
-+                                 t_IpcMsgHandler        *f_MsgHandler,
-+                                 t_Handle               h_Module,
-+                                 uint32_t               replyLength)
-+{
-+    UNUSED(addr);UNUSED(f_MsgHandler);UNUSED(h_Module);UNUSED(replyLength);
-+    return E_OK;
-+}
-+
-+t_Error XX_IpcUnregisterMsgHandler(char addr[XX_IPC_MAX_ADDR_NAME_LENGTH])
-+{
-+    UNUSED(addr);
-+    return E_OK;
-+}
-+
-+
-+t_Error XX_IpcSendMessage(t_Handle           h_Session,
-+                          uint8_t            *p_Msg,
-+                          uint32_t           msgLength,
-+                          uint8_t            *p_Reply,
-+                          uint32_t           *p_ReplyLength,
-+                          t_IpcMsgCompletion *f_Completion,
-+                          t_Handle           h_Arg)
-+{
-+    UNUSED(h_Session); UNUSED(p_Msg); UNUSED(msgLength); UNUSED(p_Reply);
-+    UNUSED(p_ReplyLength); UNUSED(f_Completion); UNUSED(h_Arg);
-+    return E_OK;
-+}
-+
-+t_Handle XX_IpcInitSession(char destAddr[XX_IPC_MAX_ADDR_NAME_LENGTH],
-+                           char srcAddr[XX_IPC_MAX_ADDR_NAME_LENGTH])
-+{
-+    UNUSED(destAddr); UNUSED(srcAddr);
-+    return E_OK;
-+}
-+
-+/*Forced to introduce due to PRINT_FMT_PARAMS define*/
-+uint32_t E500_GetId(void)
-+{
-+    return raw_smp_processor_id();
-+}
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22)
-+int GetDeviceIrqNum(int irq)
-+{
-+    struct device_node  *iPar;
-+    struct irq_domain   *irqHost;
-+    uint32_t            hwIrq;
-+
-+    /* Get the interrupt controller */
-+    iPar = of_find_node_by_name(NULL, "mpic");
-+    hwIrq = 0;
-+
-+    ASSERT_COND(iPar != NULL);
-+    /* Get the irq host */
-+    irqHost = irq_find_host(iPar);
-+    of_node_put(iPar);
-+
-+    /* Create irq mapping */
-+    return irq_create_mapping(irqHost, hwIrq);
-+}
-+#else
-+#error "kernel not supported!!!"
-+#endif    /* LINUX_VERSION_CODE */
-+
-+void * XX_PhysToVirt(physAddress_t addr)
-+{
-+    return UINT_TO_PTR(SYS_PhysToVirt((uint64_t)addr));
-+}
-+
-+physAddress_t XX_VirtToPhys(void * addr)
-+{
-+    return (physAddress_t)SYS_VirtToPhys(PTR_TO_UINT(addr));
-+}
-+
-+void * xx_MallocSmart(uint32_t size, int memPartitionId, uint32_t alignment)
-+{
-+    uintptr_t   *returnCode, tmp;
-+
-+    if (alignment < sizeof(uintptr_t))
-+        alignment = sizeof(uintptr_t);
-+    size += alignment + sizeof(returnCode);
-+    tmp = (uintptr_t)xx_Malloc(size);
-+    if (tmp == 0)
-+        return NULL;
-+    returnCode = (uintptr_t*)((tmp + alignment + sizeof(returnCode)) & ~((uintptr_t)alignment - 1));
-+    *(returnCode - 1) = tmp;
-+
-+    return (void*)returnCode;
-+}
-+
-+void xx_FreeSmart(void *p)
-+{
-+    xx_Free((void*)(*((uintptr_t *)(p) - 1)));
-+}
---- /dev/null
-+++ b/include/linux/fsl/svr.h
-@@ -0,0 +1,97 @@
-+/*
-+ * MPC85xx cpu type detection
-+ *
-+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
-+ *
-+ * This is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef FSL_SVR_H
-+#define FSL_SVR_H
-+
-+#define SVR_REV(svr)	((svr) & 0xFF)		/* SOC design resision */
-+#define SVR_MAJ(svr)	(((svr) >>  4) & 0xF)	/* Major revision field*/
-+#define SVR_MIN(svr)	(((svr) >>  0) & 0xF)	/* Minor revision field*/
-+
-+/* Some parts define SVR[0:23] as the SOC version */
-+#define SVR_SOC_VER(svr) (((svr) >> 8) & 0xFFF7FF)	/* SOC Version fields */
-+
-+#define SVR_8533	0x803400
-+#define SVR_8535	0x803701
-+#define SVR_8536	0x803700
-+#define SVR_8540	0x803000
-+#define SVR_8541	0x807200
-+#define SVR_8543	0x803200
-+#define SVR_8544	0x803401
-+#define SVR_8545	0x803102
-+#define SVR_8547	0x803101
-+#define SVR_8548	0x803100
-+#define SVR_8555	0x807100
-+#define SVR_8560	0x807000
-+#define SVR_8567	0x807501
-+#define SVR_8568	0x807500
-+#define SVR_8569	0x808000
-+#define SVR_8572	0x80E000
-+#define SVR_P1010	0x80F100
-+#define SVR_P1011	0x80E500
-+#define SVR_P1012	0x80E501
-+#define SVR_P1013	0x80E700
-+#define SVR_P1014	0x80F101
-+#define SVR_P1017	0x80F700
-+#define SVR_P1020	0x80E400
-+#define SVR_P1021	0x80E401
-+#define SVR_P1022	0x80E600
-+#define SVR_P1023	0x80F600
-+#define SVR_P1024	0x80E402
-+#define SVR_P1025	0x80E403
-+#define SVR_P2010	0x80E300
-+#define SVR_P2020	0x80E200
-+#define SVR_P2040	0x821000
-+#define SVR_P2041	0x821001
-+#define SVR_P3041	0x821103
-+#define SVR_P4040	0x820100
-+#define SVR_P4080	0x820000
-+#define SVR_P5010	0x822100
-+#define SVR_P5020	0x822000
-+#define SVR_P5021	0X820500
-+#define SVR_P5040	0x820400
-+#define SVR_T4240	0x824000
-+#define SVR_T4120	0x824001
-+#define SVR_T4160	0x824100
-+#define SVR_T4080	0x824102
-+#define SVR_C291	0x850000
-+#define SVR_C292	0x850020
-+#define SVR_C293	0x850030
-+#define SVR_B4860	0X868000
-+#define SVR_G4860	0x868001
-+#define SVR_G4060	0x868003
-+#define SVR_B4440	0x868100
-+#define SVR_G4440	0x868101
-+#define SVR_B4420	0x868102
-+#define SVR_B4220	0x868103
-+#define SVR_T1040	0x852000
-+#define SVR_T1041	0x852001
-+#define SVR_T1042	0x852002
-+#define SVR_T1020	0x852100
-+#define SVR_T1021	0x852101
-+#define SVR_T1022	0x852102
-+#define SVR_T1023	0x854100
-+#define SVR_T1024	0x854000
-+#define SVR_T2080	0x853000
-+#define SVR_T2081	0x853100
-+
-+#define SVR_8610	0x80A000
-+#define SVR_8641	0x809000
-+#define SVR_8641D	0x809001
-+
-+#define SVR_9130	0x860001
-+#define SVR_9131	0x860000
-+#define SVR_9132	0x861000
-+#define SVR_9232	0x861400
-+
-+#define SVR_Unknown	0xFFFFFF
-+
-+#endif
---- /dev/null
-+++ b/include/uapi/linux/fmd/Kbuild
-@@ -0,0 +1,5 @@
-+header-y += integrations/
-+header-y += Peripherals/
-+
-+header-y += ioctls.h
-+header-y += net_ioctls.h
---- /dev/null
-+++ b/include/uapi/linux/fmd/Peripherals/Kbuild
-@@ -0,0 +1,4 @@
-+header-y += fm_ioctls.h
-+header-y += fm_port_ioctls.h
-+header-y += fm_pcd_ioctls.h
-+header-y += fm_test_ioctls.h
---- /dev/null
-+++ b/include/uapi/linux/fmd/Peripherals/fm_ioctls.h
-@@ -0,0 +1,628 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc.
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**************************************************************************//**
-+ @File          fm_ioctls.h
-+
-+ @Description   FM Char device ioctls
-+*//***************************************************************************/
-+#ifndef __FM_IOCTLS_H
-+#define __FM_IOCTLS_H
-+
-+
-+/**************************************************************************//**
-+ @Group         lnx_ioctl_FM_grp Frame Manager Linux IOCTL API
-+
-+ @Description   FM Linux ioctls definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Collection    FM IOCTL device ('/dev') definitions
-+*//***************************************************************************/
-+#define DEV_FM_NAME                 "fm" /**< Name of the FM chardev */
-+
-+#define DEV_FM_MINOR_BASE           0
-+#define DEV_FM_PCD_MINOR_BASE       (DEV_FM_MINOR_BASE + 1)                                 /*/dev/fmx-pcd */
-+#define DEV_FM_OH_PORTS_MINOR_BASE  (DEV_FM_PCD_MINOR_BASE + 1)                             /*/dev/fmx-port-ohy */
-+#define DEV_FM_RX_PORTS_MINOR_BASE  (DEV_FM_OH_PORTS_MINOR_BASE + FM_MAX_NUM_OF_OH_PORTS)   /*/dev/fmx-port-rxy */
-+#define DEV_FM_TX_PORTS_MINOR_BASE  (DEV_FM_RX_PORTS_MINOR_BASE + FM_MAX_NUM_OF_RX_PORTS)   /*/dev/fmx-port-txy */
-+#define DEV_FM_MAX_MINORS           (DEV_FM_TX_PORTS_MINOR_BASE + FM_MAX_NUM_OF_TX_PORTS)
-+
-+#define FM_IOC_NUM(n)       (n)
-+#define FM_PCD_IOC_NUM(n)   (n+20)
-+#define FM_PORT_IOC_NUM(n)  (n+70)
-+/* @} */
-+
-+#define IOC_FM_MAX_NUM_OF_PORTS         64
-+
-+
-+/**************************************************************************//**
-+ @Description   Enum for defining port types
-+                (must match enum e_FmPortType defined in fm_ext.h)
-+*//***************************************************************************/
-+typedef enum ioc_fm_port_type {
-+    e_IOC_FM_PORT_TYPE_OH_OFFLINE_PARSING = 0,  /**< Offline parsing port */
-+    e_IOC_FM_PORT_TYPE_RX,                      /**< 1G Rx port */
-+    e_IOC_FM_PORT_TYPE_RX_10G,                  /**< 10G Rx port */
-+    e_IOC_FM_PORT_TYPE_TX,                      /**< 1G Tx port */
-+    e_IOC_FM_PORT_TYPE_TX_10G,                  /**< 10G Tx port */
-+    e_IOC_FM_PORT_TYPE_DUMMY
-+} ioc_fm_port_type;
-+
-+
-+/**************************************************************************//**
-+ @Group         lnx_ioctl_FM_lib_grp FM library
-+
-+ @Description   FM API functions, definitions and enums
-+                The FM module is the main driver module and is a mandatory module
-+                for FM driver users. Before any further module initialization,
-+                this module must be initialized.
-+                The FM is a "single-tone" module. It is responsible of the common
-+                HW modules: FPM, DMA, common QMI, common BMI initializations and
-+                run-time control routines. This module must be initialized always
-+                when working with any of the FM modules.
-+                NOTE - We assumes that the FML will be initialize only by core No. 0!
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   FM Exceptions
-+*//***************************************************************************/
-+typedef enum ioc_fm_exceptions {
-+    e_IOC_FM_EX_DMA_BUS_ERROR,              /**< DMA bus error. */
-+    e_IOC_EX_DMA_READ_ECC,               /**< Read Buffer ECC error (Valid for FM rev < 6)*/
-+    e_IOC_EX_DMA_SYSTEM_WRITE_ECC,       /**< Write Buffer ECC error on system side (Valid for FM rev < 6)*/
-+    e_IOC_EX_DMA_FM_WRITE_ECC,           /**< Write Buffer ECC error on FM side (Valid for FM rev < 6)*/
-+    e_IOC_EX_DMA_SINGLE_PORT_ECC,        /**< Single Port ECC error on FM side (Valid for FM rev > 6)*/
-+    e_IOC_EX_FPM_STALL_ON_TASKS,         /**< Stall of tasks on FPM */
-+    e_IOC_EX_FPM_SINGLE_ECC,             /**< Single ECC on FPM. */
-+    e_IOC_EX_FPM_DOUBLE_ECC,             /**< Double ECC error on FPM ram access */
-+    e_IOC_EX_QMI_SINGLE_ECC,             /**< Single ECC on QMI. */
-+    e_IOC_EX_QMI_DOUBLE_ECC,             /**< Double bit ECC occurred on QMI */
-+    e_IOC_EX_QMI_DEQ_FROM_UNKNOWN_PORTID,/**< Dequeue from unknown port id */
-+    e_IOC_EX_BMI_LIST_RAM_ECC,           /**< Linked List RAM ECC error */
-+    e_IOC_EX_BMI_STORAGE_PROFILE_ECC,    /**< Storage Profile ECC Error */
-+    e_IOC_EX_BMI_STATISTICS_RAM_ECC,     /**< Statistics Count RAM ECC Error Enable */
-+    e_IOC_EX_BMI_DISPATCH_RAM_ECC,       /**< Dispatch RAM ECC Error Enable */
-+    e_IOC_EX_IRAM_ECC,                   /**< Double bit ECC occurred on IRAM*/
-+    e_IOC_EX_MURAM_ECC                   /**< Double bit ECC occurred on MURAM*/
-+} ioc_fm_exceptions;
-+
-+/**************************************************************************//**
-+ @Group         lnx_ioctl_FM_runtime_control_grp FM Runtime Control Unit
-+
-+ @Description   FM Runtime control unit API functions, definitions and enums.
-+                The FM driver provides a set of control routines for each module.
-+                These routines may only be called after the module was fully
-+                initialized (both configuration and initialization routines were
-+                called). They are typically used to get information from hardware
-+                (status, counters/statistics, revision etc.), to modify a current
-+                state or to force/enable a required action. Run-time control may
-+                be called whenever necessary and as many times as needed.
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Collection   General FM defines.
-+ *//***************************************************************************/
-+#define IOC_FM_MAX_NUM_OF_VALID_PORTS  (FM_MAX_NUM_OF_OH_PORTS + \
-+                                        FM_MAX_NUM_OF_1G_RX_PORTS +  \
-+                                        FM_MAX_NUM_OF_10G_RX_PORTS + \
-+                                        FM_MAX_NUM_OF_1G_TX_PORTS +  \
-+                                        FM_MAX_NUM_OF_10G_TX_PORTS)
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Description   Structure for Port bandwidth requirement. Port is identified
-+                by type and relative id.
-+                (must be identical to t_FmPortBandwidth defined in fm_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_port_bandwidth_t {
-+    ioc_fm_port_type    type;           /**< FM port type */
-+    uint8_t             relative_port_id; /**< Type relative port id */
-+    uint8_t             bandwidth;      /**< bandwidth - (in term of percents) */
-+} ioc_fm_port_bandwidth_t;
-+
-+/**************************************************************************//**
-+ @Description   A Structure containing an array of Port bandwidth requirements.
-+                The user should state the ports requiring bandwidth in terms of
-+                percentage - i.e. all port's bandwidths in the array must add
-+                up to 100.
-+                (must be identical to t_FmPortsBandwidthParams defined in fm_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_port_bandwidth_params {
-+    uint8_t                     num_of_ports;
-+                                /**< num of ports listed in the array below */
-+    ioc_fm_port_bandwidth_t     ports_bandwidths[IOC_FM_MAX_NUM_OF_VALID_PORTS];
-+                                /**< for each port, it's bandwidth (all port's
-+                                  bandwidths must add up to 100.*/
-+} ioc_fm_port_bandwidth_params;
-+
-+/**************************************************************************//**
-+ @Description   enum for defining FM counters
-+*//***************************************************************************/
-+typedef enum ioc_fm_counters {
-+    e_IOC_FM_COUNTERS_ENQ_TOTAL_FRAME,              /**< QMI total enqueued frames counter */
-+    e_IOC_FM_COUNTERS_DEQ_TOTAL_FRAME,              /**< QMI total dequeued frames counter */
-+    e_IOC_FM_COUNTERS_DEQ_0,                        /**< QMI 0 frames from QMan counter */
-+    e_IOC_FM_COUNTERS_DEQ_1,                        /**< QMI 1 frames from QMan counter */
-+    e_IOC_FM_COUNTERS_DEQ_2,                        /**< QMI 2 frames from QMan counter */
-+    e_IOC_FM_COUNTERS_DEQ_3,                        /**< QMI 3 frames from QMan counter */
-+    e_IOC_FM_COUNTERS_DEQ_FROM_DEFAULT,             /**< QMI dequeue from default queue counter */
-+    e_IOC_FM_COUNTERS_DEQ_FROM_CONTEXT,             /**< QMI dequeue from FQ context counter */
-+    e_IOC_FM_COUNTERS_DEQ_FROM_FD,                  /**< QMI dequeue from FD command field counter */
-+    e_IOC_FM_COUNTERS_DEQ_CONFIRM,                  /**< QMI dequeue confirm counter */
-+} ioc_fm_counters;
-+
-+typedef struct ioc_fm_obj_t {
-+    void            *obj;
-+} ioc_fm_obj_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for returning revision information
-+                (must match struct t_FmRevisionInfo declared in fm_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_revision_info_t {
-+    uint8_t         major;               /**< Major revision */
-+    uint8_t         minor;               /**< Minor revision */
-+} ioc_fm_revision_info_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for FM counters
-+*//***************************************************************************/
-+typedef struct ioc_fm_counters_params_t {
-+    ioc_fm_counters cnt;                /**< The requested counter */
-+    uint32_t        val;                /**< The requested value to get/set from/into the counter */
-+} ioc_fm_counters_params_t;
-+
-+typedef union ioc_fm_api_version_t {
-+    struct {
-+        uint8_t major;
-+        uint8_t minor;
-+        uint8_t respin;
-+        uint8_t reserved;
-+    } version;
-+    uint32_t ver;
-+} ioc_fm_api_version_t;
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Description   A structure of information about each of the external
-+                buffer pools used by a port or storage-profile.
-+                (must be identical to t_FmExtPoolParams defined in fm_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_ext_pool_params {
-+    uint8_t                 id;     /**< External buffer pool id */
-+    uint16_t                size;   /**< External buffer pool buffer size */
-+} ioc_fm_ext_pool_params;
-+
-+/**************************************************************************//**
-+ @Description   A structure for informing the driver about the external
-+                buffer pools allocated in the BM and used by a port or a
-+                storage-profile.
-+                (must be identical to t_FmExtPools defined in fm_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_ext_pools {
-+    uint8_t                 num_of_pools_used;     /**< Number of pools use by this port */
-+    ioc_fm_ext_pool_params  ext_buf_pool[FM_PORT_MAX_NUM_OF_EXT_POOLS];
-+                                                /**< Parameters for each port */
-+} ioc_fm_ext_pools;
-+
-+typedef struct ioc_fm_vsp_params_t {
-+    void                *p_fm;              /**< A handle to the FM object this VSP related to */
-+    ioc_fm_ext_pools    ext_buf_pools;        /**< Which external buffer pools are used
-+                                                 (up to FM_PORT_MAX_NUM_OF_EXT_POOLS), and their sizes.
-+                                                 parameter associated with Rx / OP port */
-+    uint16_t            liodn_offset;        /**< VSP's LIODN offset */
-+    struct {
-+        ioc_fm_port_type port_type;          /**< Port type */
-+        uint8_t         port_id;             /**< Port Id - relative to type */
-+    } port_params;
-+    uint8_t             relative_profile_id;  /**< VSP Id - relative to VSP's range
-+                                                 defined in relevant FM object */
-+    void                *id;                /**< return value */
-+} ioc_fm_vsp_params_t;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining BM pool depletion criteria
-+*//***************************************************************************/
-+typedef struct ioc_fm_buf_pool_depletion_t {
-+    bool        pools_grp_mode_enable;              /**< select mode in which pause frames will be sent after
-+                                                         a number of pools (all together!) are depleted */
-+    uint8_t     num_of_pools;                       /**< the number of depleted pools that will invoke
-+                                                         pause frames transmission. */
-+    bool        pools_to_consider[BM_MAX_NUM_OF_POOLS];
-+                                                    /**< For each pool, TRUE if it should be considered for
-+                                                         depletion (Note - this pool must be used by this port!). */
-+    bool        single_pool_mode_enable;            /**< select mode in which pause frames will be sent after
-+                                                         a single-pool is depleted; */
-+    bool        pools_to_consider_for_single_mode[BM_MAX_NUM_OF_POOLS];
-+                                                    /**< For each pool, TRUE if it should be considered for
-+                                                         depletion (Note - this pool must be used by this port!) */
-+#if (DPAA_VERSION >= 11)
-+    bool        pfc_priorities_en[FM_MAX_NUM_OF_PFC_PRIORITIES];
-+                                                    /**< This field is used by the MAC as the Priority Enable Vector in the PFC frame
-+                                                         which is transmitted */
-+#endif /* (DPAA_VERSION >= 11) */
-+} ioc_fm_buf_pool_depletion_t;
-+
-+#if (DPAA_VERSION >= 11)
-+typedef struct ioc_fm_buf_pool_depletion_params_t {
-+    void        *p_fm_vsp;
-+    ioc_fm_buf_pool_depletion_t fm_buf_pool_depletion;
-+} ioc_fm_buf_pool_depletion_params_t;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+typedef struct ioc_fm_buffer_prefix_content_t {
-+    uint16_t    priv_data_size;       /**< Number of bytes to be left at the beginning
-+                                         of the external buffer; Note that the private-area will
-+                                         start from the base of the buffer address. */
-+    bool        pass_prs_result;      /**< TRUE to pass the parse result to/from the FM;
-+                                         User may use FM_PORT_GetBufferPrsResult() in order to
-+                                         get the parser-result from a buffer. */
-+    bool        pass_time_stamp;      /**< TRUE to pass the timeStamp to/from the FM
-+                                         User may use FM_PORT_GetBufferTimeStamp() in order to
-+                                         get the parser-result from a buffer. */
-+    bool        pass_hash_result;     /**< TRUE to pass the KG hash result to/from the FM
-+                                         User may use FM_PORT_GetBufferHashResult() in order to
-+                                         get the parser-result from a buffer. */
-+    bool        pass_all_other_pcd_info; /**< Add all other Internal-Context information:
-+                                         AD, hash-result, key, etc. */
-+    uint16_t    data_align;          /**< 0 to use driver's default alignment [64],
-+                                         other value for selecting a data alignment (must be a power of 2);
-+                                         if write optimization is used, must be >= 16. */
-+    uint8_t     manip_extra_space;    /**< Maximum extra size needed (insertion-size minus removal-size);
-+                                         Note that this field impacts the size of the buffer-prefix
-+                                         (i.e. it pushes the data offset);
-+                                         This field is irrelevant if DPAA_VERSION==10 */
-+} ioc_fm_buffer_prefix_content_t;
-+
-+typedef struct ioc_fm_buffer_prefix_content_params_t {
-+    void        *p_fm_vsp;
-+    ioc_fm_buffer_prefix_content_t fm_buffer_prefix_content;
-+} ioc_fm_buffer_prefix_content_params_t;
-+
-+#if (DPAA_VERSION >= 11)
-+typedef struct ioc_fm_vsp_config_no_sg_params_t {
-+    void        *p_fm_vsp;
-+    bool        no_sg;
-+} ioc_fm_vsp_config_no_sg_params_t;
-+
-+typedef struct ioc_fm_vsp_prs_result_params_t {
-+    void        *p_fm_vsp;
-+    void        *p_data;
-+} ioc_fm_vsp_prs_result_params_t;
-+#endif
-+
-+typedef struct fm_ctrl_mon_t {
-+    uint8_t     percent_cnt[2];
-+} fm_ctrl_mon_t;
-+
-+typedef struct ioc_fm_ctrl_mon_counters_params_t {
-+    uint8_t     fm_ctrl_index;
-+    fm_ctrl_mon_t *p_mon;
-+} ioc_fm_ctrl_mon_counters_params_t;
-+
-+/**************************************************************************//**
-+ @Function      FM_IOC_SET_PORTS_BANDWIDTH
-+
-+ @Description   Sets relative weights between ports when accessing common resources.
-+
-+ @Param[in]     ioc_fm_port_bandwidth_params    Port bandwidth percentages,
-+ their sum must equal 100.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+#define FM_IOC_SET_PORTS_BANDWIDTH                             _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(2), ioc_fm_port_bandwidth_params)
-+
-+/**************************************************************************//**
-+ @Function      FM_IOC_GET_REVISION
-+
-+ @Description   Returns the FM revision
-+
-+ @Param[out]    ioc_fm_revision_info_t  A structure of revision information parameters.
-+
-+ @Return        None.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+#define FM_IOC_GET_REVISION                                    _IOR(FM_IOC_TYPE_BASE, FM_IOC_NUM(3), ioc_fm_revision_info_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_IOC_GET_COUNTER
-+
-+ @Description   Reads one of the FM counters.
-+
-+ @Param[in,out] ioc_fm_counters_params_t The requested counter parameters.
-+
-+ @Return        Counter's current value.
-+
-+ @Cautions      Allowed only following FM_Init().
-+                Note that it is user's responsibilty to call this routine only
-+                for enabled counters, and there will be no indication if a
-+                disabled counter is accessed.
-+*//***************************************************************************/
-+#define FM_IOC_GET_COUNTER                                    _IOWR(FM_IOC_TYPE_BASE, FM_IOC_NUM(4), ioc_fm_counters_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_IOC_SET_COUNTER
-+
-+ @Description   Sets a value to an enabled counter. Use "0" to reset the counter.
-+
-+ @Param[in]     ioc_fm_counters_params_t The requested counter parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+#define FM_IOC_SET_COUNTER                                    _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(5), ioc_fm_counters_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_IOC_FORCE_INTR
-+
-+ @Description   Causes an interrupt event on the requested source.
-+
-+ @Param[in]     ioc_fm_exceptions   An exception to be forced.
-+
-+ @Return        E_OK on success; Error code if the exception is not enabled,
-+                or is not able to create interrupt.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+#define FM_IOC_FORCE_INTR                                    _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(6), ioc_fm_exceptions)
-+
-+/**************************************************************************//**
-+ @Function      FM_IOC_GET_API_VERSION
-+
-+ @Description   Reads the FMD IOCTL API version.
-+
-+ @Param[in,out] ioc_fm_api_version_t The requested counter parameters.
-+
-+ @Return        Version's value.
-+*//***************************************************************************/
-+#define FM_IOC_GET_API_VERSION                               _IOR(FM_IOC_TYPE_BASE, FM_IOC_NUM(7), ioc_fm_api_version_t)
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Function      FM_VSP_Config
-+
-+ @Description   Creates descriptor for the FM VSP module.
-+
-+                The routine returns a handle (descriptor) to the FM VSP object.
-+                This descriptor must be passed as first parameter to all other
-+                FM VSP function calls.
-+
-+                No actual initialization or configuration of FM hardware is
-+                done by this routine.
-+
-+@Param[in]      p_FmVspParams   Pointer to data structure of parameters
-+
-+ @Retval        Handle to FM VSP object, or NULL for Failure.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_IOC_VSP_CONFIG_COMPAT                             _IOWR(FM_IOC_TYPE_BASE, FM_IOC_NUM(8), ioc_compat_fm_vsp_params_t)
-+#endif
-+#define FM_IOC_VSP_CONFIG                                    _IOWR(FM_IOC_TYPE_BASE, FM_IOC_NUM(8), ioc_fm_vsp_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_Init
-+
-+ @Description   Initializes the FM VSP module
-+
-+ @Param[in]     h_FmVsp - FM VSP module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_IOC_VSP_INIT_COMPAT                               _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(9), ioc_compat_fm_obj_t)
-+#endif
-+#define FM_IOC_VSP_INIT                                      _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(9), ioc_fm_obj_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_Free
-+
-+ @Description   Frees all resources that were assigned to FM VSP module.
-+
-+                Calling this routine invalidates the descriptor.
-+
-+ @Param[in]     h_FmVsp - FM VSP module descriptor
-+
-+ @Return        E_OK on success; Error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_IOC_VSP_FREE_COMPAT                               _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(10), ioc_compat_fm_obj_t)
-+#endif
-+#define FM_IOC_VSP_FREE                                      _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(10), ioc_fm_obj_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_ConfigPoolDepletion
-+
-+ @Description   Calling this routine enables pause frame generation depending on the
-+                depletion status of BM pools. It also defines the conditions to activate
-+                this functionality. By default, this functionality is disabled.
-+
-+ @Param[in]     ioc_fm_buf_pool_depletion_params_t      A structure holding the required parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_VSP_Config() and before FM_VSP_Init().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_IOC_VSP_CONFIG_POOL_DEPLETION_COMPAT              _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(11), ioc_compat_fm_buf_pool_depletion_params_t)
-+#endif
-+#define FM_IOC_VSP_CONFIG_POOL_DEPLETION                     _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(11), ioc_fm_buf_pool_depletion_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_ConfigBufferPrefixContent
-+
-+ @Description   Defines the structure, size and content of the application buffer.
-+
-+                The prefix will
-+                In VSPs defined for Tx ports, if 'passPrsResult', the application
-+                should set a value to their offsets in the prefix of
-+                the FM will save the first 'privDataSize', than,
-+                depending on 'passPrsResult' and 'passTimeStamp', copy parse result
-+                and timeStamp, and the packet itself (in this order), to the
-+                application buffer, and to offset.
-+
-+                Calling this routine changes the buffer margins definitions
-+                in the internal driver data base from its default
-+                configuration: Data size:  [DEFAULT_FM_SP_bufferPrefixContent_privDataSize]
-+                               Pass Parser result: [DEFAULT_FM_SP_bufferPrefixContent_passPrsResult].
-+                               Pass timestamp: [DEFAULT_FM_SP_bufferPrefixContent_passTimeStamp].
-+
-+ @Param[in]     ioc_fm_buffer_prefix_content_params_t   A structure holding the required parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_VSP_Config() and before FM_VSP_Init().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_IOC_VSP_CONFIG_BUFFER_PREFIX_CONTENT_COMPAT       _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(12), ioc_compat_fm_buffer_prefix_content_params_t)
-+#endif
-+#define FM_IOC_VSP_CONFIG_BUFFER_PREFIX_CONTENT              _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(12), ioc_fm_buffer_prefix_content_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_ConfigNoScatherGather
-+
-+ @Description   Calling this routine changes the possibility to receive S/G frame
-+                in the internal driver data base
-+                from its default configuration: optimize = [DEFAULT_FM_SP_noScatherGather]
-+
-+ @Param[in]     ioc_fm_vsp_config_no_sg_params_t        A structure holding the required parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_VSP_Config() and before FM_VSP_Init().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_IOC_VSP_CONFIG_NO_SG_COMPAT                     _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(13), ioc_compat_fm_vsp_config_no_sg_params_t)
-+#endif
-+#define FM_IOC_VSP_CONFIG_NO_SG                            _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(13), ioc_fm_vsp_config_no_sg_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_VSP_GetBufferPrsResult
-+
-+ @Description   Returns the pointer to the parse result in the data buffer.
-+                In Rx ports this is relevant after reception, if parse
-+                result is configured to be part of the data passed to the
-+                application. For non Rx ports it may be used to get the pointer
-+                of the area in the buffer where parse result should be
-+                initialized - if so configured.
-+                See FM_VSP_ConfigBufferPrefixContent for data buffer prefix
-+                configuration.
-+
-+ @Param[in]     ioc_fm_vsp_prs_result_params_t  A structure holding the required parameters.
-+
-+ @Return        Parse result pointer on success, NULL if parse result was not
-+                configured for this port.
-+
-+ @Cautions      Allowed only following FM_VSP_Init().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_IOC_VSP_GET_BUFFER_PRS_RESULT_COMPAT            _IOWR(FM_IOC_TYPE_BASE, FM_IOC_NUM(14), ioc_compat_fm_vsp_prs_result_params_t)
-+#endif
-+#define FM_IOC_VSP_GET_BUFFER_PRS_RESULT                   _IOWR(FM_IOC_TYPE_BASE, FM_IOC_NUM(14), ioc_fm_vsp_prs_result_params_t)
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/**************************************************************************//**
-+ @Function      FM_CtrlMonStart
-+
-+ @Description   Start monitoring utilization of all available FM controllers.
-+
-+                In order to obtain FM controllers utilization the following sequence
-+                should be used:
-+                -# FM_CtrlMonStart()
-+                -# FM_CtrlMonStop()
-+                -# FM_CtrlMonGetCounters() - issued for each FM controller
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+#define FM_IOC_CTRL_MON_START                              _IO(FM_IOC_TYPE_BASE, FM_IOC_NUM(15))
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_CtrlMonStop
-+
-+ @Description   Stop monitoring utilization of all available FM controllers.
-+
-+                In order to obtain FM controllers utilization the following sequence
-+                should be used:
-+                -# FM_CtrlMonStart()
-+                -# FM_CtrlMonStop()
-+                -# FM_CtrlMonGetCounters() - issued for each FM controller
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+#define FM_IOC_CTRL_MON_STOP                               _IO(FM_IOC_TYPE_BASE, FM_IOC_NUM(16))
-+
-+/**************************************************************************//**
-+ @Function      FM_CtrlMonGetCounters
-+
-+ @Description   Obtain FM controller utilization parameters.
-+
-+                In order to obtain FM controllers utilization the following sequence
-+                should be used:
-+                -# FM_CtrlMonStart()
-+                -# FM_CtrlMonStop()
-+                -# FM_CtrlMonGetCounters() - issued for each FM controller
-+
-+ @Param[in]     ioc_fm_ctrl_mon_counters_params_t       A structure holding the required parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_IOC_CTRL_MON_GET_COUNTERS_COMPAT                _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(17), ioc_compat_fm_ctrl_mon_counters_params_t)
-+#endif
-+#define FM_IOC_CTRL_MON_GET_COUNTERS                       _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(17), ioc_fm_ctrl_mon_counters_params_t)
-+
-+/** @} */ /* end of lnx_ioctl_FM_runtime_control_grp group */
-+/** @} */ /* end of lnx_ioctl_FM_lib_grp group */
-+/** @} */ /* end of lnx_ioctl_FM_grp */
-+
-+#define FMD_API_VERSION_MAJOR 21
-+#define FMD_API_VERSION_MINOR 1 
-+#define FMD_API_VERSION_RESPIN 0
-+
-+#endif /* __FM_IOCTLS_H */
---- /dev/null
-+++ b/include/uapi/linux/fmd/Peripherals/fm_pcd_ioctls.h
-@@ -0,0 +1,3084 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc.
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/******************************************************************************
-+ @File          fm_pcd_ioctls.h
-+
-+ @Description   FM PCD ...
-+*//***************************************************************************/
-+#ifndef __FM_PCD_IOCTLS_H
-+#define __FM_PCD_IOCTLS_H
-+
-+#include "net_ioctls.h"
-+#include "fm_ioctls.h"
-+
-+
-+/**************************************************************************//**
-+
-+ @Group         lnx_ioctl_FM_grp Frame Manager Linux IOCTL API
-+
-+ @Description   Frame Manager Linux ioctls definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         lnx_ioctl_FM_PCD_grp FM PCD
-+
-+ @Description   Frame Manager PCD API functions, definitions and enums
-+
-+                The FM PCD module is responsible for the initialization of all
-+                global classifying FM modules. This includes the parser general and
-+                common registers, the key generator global and common registers,
-+                and the policer global and common registers.
-+                In addition, the FM PCD SW module will initialize all required
-+                key generator schemes, coarse classification flows, and policer
-+                profiles. When an FM module is configured to work with one of these
-+                entities, it will register to it using the FM PORT API. The PCD
-+                module will manage the PCD resources - i.e. resource management of
-+                KeyGen schemes, etc.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Collection    General PCD defines
-+*//***************************************************************************/
-+#define IOC_FM_PCD_MAX_NUM_OF_PRIVATE_HDRS              2                   /**< Number of units/headers saved for user */
-+
-+#define IOC_FM_PCD_PRS_NUM_OF_HDRS                      16                  /**< Number of headers supported by HW parser */
-+#define IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS         (32 - IOC_FM_PCD_MAX_NUM_OF_PRIVATE_HDRS)
-+                                                                            /**< Number of distinction units is limited by
-+                                                                             register size (32 bits) minus reserved bits
-+                                                                             for private headers. */
-+#define IOC_FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS      4                   /**< Maximum number of interchangeable headers
-+                                                                             in a distinction unit */
-+#define IOC_FM_PCD_KG_NUM_OF_GENERIC_REGS               8                   /**< Total number of generic KeyGen registers */
-+#define IOC_FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY       35                  /**< Max number allowed on any configuration;
-+                                                                             For HW implementation reasons, in most
-+                                                                             cases less than this will be allowed; The
-+                                                                             driver will return an initialization error
-+                                                                             if resource is unavailable. */
-+#define IOC_FM_PCD_KG_NUM_OF_EXTRACT_MASKS              4                   /**< Total number of masks allowed on KeyGen extractions. */
-+#define IOC_FM_PCD_KG_NUM_OF_DEFAULT_GROUPS             16                  /**< Number of default value logical groups */
-+
-+#define IOC_FM_PCD_PRS_NUM_OF_LABELS                    32                  /**< Maximum number of SW parser labels */
-+#define IOC_FM_PCD_SW_PRS_SIZE                          0x00000800          /**< Total size of SW parser area */
-+
-+#define IOC_FM_PCD_MAX_MANIP_INSRT_TEMPLATE_SIZE        128                 /**< Maximum size of insertion template for
-+                                                                             insert manipulation */
-+
-+#if DPAA_VERSION >= 11
-+#define IOC_FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES        64                  /**< Maximum possible entries for frame replicator group */
-+#endif /* DPAA_VERSION >= 11 */
-+/* @} */
-+
-+#ifdef FM_CAPWAP_SUPPORT
-+#error "FM_CAPWAP_SUPPORT not implemented!"
-+#endif
-+
-+
-+/**************************************************************************//**
-+ @Group         lnx_ioctl_FM_PCD_init_grp FM PCD Initialization Unit
-+
-+ @Description   Frame Manager PCD Initialization Unit API
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   PCD counters
-+                (must match enum e_FmPcdCounters defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_counters {
-+    e_IOC_FM_PCD_KG_COUNTERS_TOTAL,                                 /**< KeyGen counter */
-+    e_IOC_FM_PCD_PLCR_COUNTERS_RED,                                 /**< Policer counter - counts the total number of RED packets that exit the Policer. */
-+    e_IOC_FM_PCD_PLCR_COUNTERS_YELLOW,                              /**< Policer counter - counts the total number of YELLOW packets that exit the Policer. */
-+    e_IOC_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_RED,                    /**< Policer counter - counts the number of packets that changed color to RED by the Policer;
-+                                                                         This is a subset of e_IOC_FM_PCD_PLCR_COUNTERS_RED packet count, indicating active color changes. */
-+    e_IOC_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_YELLOW,                 /**< Policer counter - counts the number of packets that changed color to YELLOW by the Policer;
-+                                                                         This is a subset of e_IOC_FM_PCD_PLCR_COUNTERS_YELLOW packet count, indicating active color changes. */
-+    e_IOC_FM_PCD_PLCR_COUNTERS_TOTAL,                               /**< Policer counter - counts the total number of packets passed in the Policer. */
-+    e_IOC_FM_PCD_PLCR_COUNTERS_LENGTH_MISMATCH,                     /**< Policer counter - counts the number of packets with length mismatch. */
-+    e_IOC_FM_PCD_PRS_COUNTERS_PARSE_DISPATCH,                       /**< Parser counter - counts the number of times the parser block is dispatched. */
-+    e_IOC_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED,             /**< Parser counter - counts the number of times L2 parse result is returned (including errors). */
-+    e_IOC_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED,             /**< Parser counter - counts the number of times L3 parse result is returned (including errors). */
-+    e_IOC_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED,             /**< Parser counter - counts the number of times L4 parse result is returned (including errors). */
-+    e_IOC_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED,           /**< Parser counter - counts the number of times SHIM parse result is returned (including errors). */
-+    e_IOC_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED_WITH_ERR,    /**< Parser counter - counts the number of times L2 parse result is returned with errors. */
-+    e_IOC_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED_WITH_ERR,    /**< Parser counter - counts the number of times L3 parse result is returned with errors. */
-+    e_IOC_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED_WITH_ERR,    /**< Parser counter - counts the number of times L4 parse result is returned with errors. */
-+    e_IOC_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED_WITH_ERR,  /**< Parser counter - counts the number of times SHIM parse result is returned with errors. */
-+    e_IOC_FM_PCD_PRS_COUNTERS_SOFT_PRS_CYCLES,                      /**< Parser counter - counts the number of cycles spent executing soft parser instruction (including stall cycles). */
-+    e_IOC_FM_PCD_PRS_COUNTERS_SOFT_PRS_STALL_CYCLES,                /**< Parser counter - counts the number of cycles stalled waiting for parser internal memory reads while executing soft parser instruction. */
-+    e_IOC_FM_PCD_PRS_COUNTERS_HARD_PRS_CYCLE_INCL_STALL_CYCLES,     /**< Parser counter - counts the number of cycles spent executing hard parser (including stall cycles). */
-+    e_IOC_FM_PCD_PRS_COUNTERS_MURAM_READ_CYCLES,                    /**< MURAM counter - counts the number of cycles while performing FMan Memory read. */
-+    e_IOC_FM_PCD_PRS_COUNTERS_MURAM_READ_STALL_CYCLES,              /**< MURAM counter - counts the number of cycles stalled while performing FMan Memory read. */
-+    e_IOC_FM_PCD_PRS_COUNTERS_MURAM_WRITE_CYCLES,                   /**< MURAM counter - counts the number of cycles while performing FMan Memory write. */
-+    e_IOC_FM_PCD_PRS_COUNTERS_MURAM_WRITE_STALL_CYCLES,             /**< MURAM counter - counts the number of cycles stalled while performing FMan Memory write. */
-+    e_IOC_FM_PCD_PRS_COUNTERS_FPM_COMMAND_STALL_CYCLES              /**< FPM counter - counts the number of cycles stalled while performing a FPM Command. */
-+} ioc_fm_pcd_counters;
-+
-+/**************************************************************************//**
-+ @Description   PCD interrupts
-+                (must match enum e_FmPcdExceptions defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_exceptions {
-+    e_IOC_FM_PCD_KG_EXCEPTION_DOUBLE_ECC,                   /**< KeyGen double-bit ECC error is detected on internal memory read access. */
-+    e_IOC_FM_PCD_KG_EXCEPTION_KEYSIZE_OVERFLOW,             /**< KeyGen scheme configuration error indicating a key size larger than 56 bytes. */
-+    e_IOC_FM_PCD_PLCR_EXCEPTION_DOUBLE_ECC,                 /**< Policer double-bit ECC error has been detected on PRAM read access. */
-+    e_IOC_FM_PCD_PLCR_EXCEPTION_INIT_ENTRY_ERROR,           /**< Policer access to a non-initialized profile has been detected. */
-+    e_IOC_FM_PCD_PLCR_EXCEPTION_PRAM_SELF_INIT_COMPLETE,    /**< Policer RAM self-initialization complete */
-+    e_IOC_FM_PCD_PLCR_EXCEPTION_ATOMIC_ACTION_COMPLETE,     /**< Policer atomic action complete */
-+    e_IOC_FM_PCD_PRS_EXCEPTION_DOUBLE_ECC,                  /**< Parser double-bit ECC error */
-+    e_IOC_FM_PCD_PRS_EXCEPTION_SINGLE_ECC                   /**< Parser single-bit ECC error */
-+} ioc_fm_pcd_exceptions;
-+
-+/** @} */ /* end of lnx_ioctl_FM_PCD_init_grp group */
-+
-+
-+/**************************************************************************//**
-+ @Group         lnx_ioctl_FM_PCD_Runtime_grp FM PCD Runtime Unit
-+
-+ @Description   Frame Manager PCD Runtime Unit
-+
-+                The runtime control allows creation of PCD infrastructure modules
-+                such as Network Environment Characteristics, Classification Plan
-+                Groups and Coarse Classification Trees.
-+                It also allows on-the-fly initialization, modification and removal
-+                of PCD modules such as KeyGen schemes, coarse classification nodes
-+                and Policer profiles.
-+
-+                In order to explain the programming model of the PCD driver interface
-+                a few terms should be explained, and will be used below.
-+                  - Distinction Header - One of the 16 protocols supported by the FM parser,
-+                    or one of the SHIM headers (1 or 2). May be a header with a special
-+                    option (see below).
-+                  - Interchangeable Headers Group - This is a group of Headers recognized
-+                    by either one of them. For example, if in a specific context the user
-+                    chooses to treat IPv4 and IPV6 in the same way, they may create an
-+                    interchangeable Headers Unit consisting of these 2 headers.
-+                  - A Distinction Unit - a Distinction Header or an Interchangeable Headers
-+                    Group.
-+                  - Header with special option - applies to Ethernet, MPLS, VLAN, IPv4 and
-+                    IPv6, includes multicast, broadcast and other protocol specific options.
-+                    In terms of hardware it relates to the options available in the classification
-+                    plan.
-+                  - Network Environment Characteristics - a set of Distinction Units that define
-+                    the total recognizable header selection for a certain environment. This is
-+                    NOT the list of all headers that will ever appear in a flow, but rather
-+                    everything that needs distinction in a flow, where distinction is made by KeyGen
-+                    schemes and coarse classification action descriptors.
-+
-+                The PCD runtime modules initialization is done in stages. The first stage after
-+                initializing the PCD module itself is to establish a Network Flows Environment
-+                Definition. The application may choose to establish one or more such environments.
-+                Later, when needed, the application will have to state, for some of its modules,
-+                to which single environment it belongs.
-+
-+ @{
-+*//***************************************************************************/
-+
-+
-+/**************************************************************************//**
-+ @Description   structure for FM counters
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_counters_params_t {
-+    ioc_fm_pcd_counters cnt;                /**< The requested counter */
-+    uint32_t            val;                /**< The requested value to get/set from/into the counter */
-+} ioc_fm_pcd_counters_params_t;
-+
-+/**************************************************************************//**
-+ @Description   structure for FM exception definitios
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_exception_params_t {
-+    ioc_fm_pcd_exceptions exception;        /**< The requested exception */
-+    bool                  enable;           /**< TRUE to enable interrupt, FALSE to mask it. */
-+} ioc_fm_pcd_exception_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for SW parser labels
-+                (must be identical to struct t_FmPcdPrsLabelParams defined in fm_pcd_ext.h)
-+ *//***************************************************************************/
-+typedef struct ioc_fm_pcd_prs_label_params_t {
-+    uint32_t                instruction_offset;             /**< SW parser label instruction offset (2 bytes
-+                                                                 resolution), relative to Parser RAM. */
-+    ioc_net_header_type     hdr;                            /**< The existence of this header will invoke
-+                                                                 the SW parser code. */
-+    uint8_t                 index_per_hdr;                  /**< Normally 0, if more than one SW parser
-+                                                                 attachments for the same header, use this
-+                                                                 index to distinguish between them. */
-+} ioc_fm_pcd_prs_label_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for SW parser
-+                (Must match struct t_FmPcdPrsSwParams defined in fm_pcd_ext.h)
-+ *//***************************************************************************/
-+typedef struct ioc_fm_pcd_prs_sw_params_t {
-+    bool                    override;                   /**< FALSE to invoke a check that nothing else
-+                                                             was loaded to this address, including
-+                                                             internal patches.
-+                                                             TRUE to override any existing code.*/
-+    uint32_t                size;                       /**< SW parser code size */
-+    uint16_t                base;                       /**< SW parser base (in instruction counts!
-+                                                             must be larger than 0x20)*/
-+    uint8_t                 *p_code;                    /**< SW parser code */
-+    uint32_t                sw_prs_data_params[IOC_FM_PCD_PRS_NUM_OF_HDRS];
-+                                                        /**< SW parser data (parameters) */
-+    uint8_t                 num_of_labels;              /**< Number of labels for SW parser. */
-+    ioc_fm_pcd_prs_label_params_t labels_table[IOC_FM_PCD_PRS_NUM_OF_LABELS];
-+                                                        /**< SW parser labels table,
-+                                                             containing num_of_labels entries */
-+} ioc_fm_pcd_prs_sw_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure to set the a KeyGen default value
-+ *//***************************************************************************/
-+typedef struct ioc_fm_pcd_kg_dflt_value_params_t {
-+    uint8_t                         valueId;                /**< 0,1 - one of 2 global default values */
-+    uint32_t                        value;                  /**< The requested default value */
-+} ioc_fm_pcd_kg_dflt_value_params_t;
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_Enable
-+
-+ @Description   This routine should be called after PCD is initialized for enabling all
-+                PCD engines according to their existing configuration.
-+
-+ @Return        0 on success; Error code otherwise.
-+
-+ @Cautions      Allowed only when PCD is disabled.
-+*//***************************************************************************/
-+#define FM_PCD_IOC_ENABLE  _IO(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(1))
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_Disable
-+
-+ @Description   This routine may be called when PCD is enabled in order to
-+                disable all PCD engines. It may be called
-+                only when none of the ports in the system are using the PCD.
-+
-+ @Return        0 on success; Error code otherwise.
-+
-+ @Cautions      Allowed only when PCD is enabled.
-+*//***************************************************************************/
-+#define FM_PCD_IOC_DISABLE  _IO(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(2))
-+
-+ /**************************************************************************//**
-+ @Function      FM_PCD_PrsLoadSw
-+
-+ @Description   This routine may be called only when all ports in the
-+                system are actively using the classification plan scheme.
-+                In such cases it is recommended in order to save resources.
-+                The driver automatically saves 8 classification plans for
-+                ports that do NOT use the classification plan mechanism, to
-+                avoid this (in order to save those entries) this routine may
-+                be called.
-+
-+ @Param[in]     ioc_fm_pcd_prs_sw_params_t  A pointer to the image of the software parser code.
-+
-+ @Return        0 on success; Error code otherwise.
-+
-+ @Cautions      Allowed only when PCD is disabled.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_PRS_LOAD_SW_COMPAT  _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(3), ioc_compat_fm_pcd_prs_sw_params_t)
-+#endif
-+#define FM_PCD_IOC_PRS_LOAD_SW  _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(3), ioc_fm_pcd_prs_sw_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_KgSetDfltValue
-+
-+ @Description   Calling this routine sets a global default value to be used
-+                by the KeyGen when parser does not recognize a required
-+                field/header.
-+                By default default values are 0.
-+
-+ @Param[in]     ioc_fm_pcd_kg_dflt_value_params_t   A pointer to a structure with the relevant parameters
-+
-+ @Return        0 on success; Error code otherwise.
-+
-+ @Cautions      Allowed only when PCD is disabled.
-+*//***************************************************************************/
-+#define FM_PCD_IOC_KG_SET_DFLT_VALUE  _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(6), ioc_fm_pcd_kg_dflt_value_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_KgSetAdditionalDataAfterParsing
-+
-+ @Description   Calling this routine allows the keygen to access data past
-+                the parser finishing point.
-+
-+ @Param[in]     uint8_t   payload-offset; the number of bytes beyond the parser location.
-+
-+ @Return        0 on success; Error code otherwise.
-+
-+ @Cautions      Allowed only when PCD is disabled.
-+*//***************************************************************************/
-+#define FM_PCD_IOC_KG_SET_ADDITIONAL_DATA_AFTER_PARSING  _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(7), uint8_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_SetException
-+
-+ @Description   Calling this routine enables/disables PCD interrupts.
-+
-+ @Param[in]     ioc_fm_pcd_exception_params_t     Arguments struct with exception to be enabled/disabled.
-+
-+ @Return        0 on success; Error code otherwise.
-+*//***************************************************************************/
-+#define FM_PCD_IOC_SET_EXCEPTION _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(8), ioc_fm_pcd_exception_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_GetCounter
-+
-+ @Description   Reads one of the FM PCD counters.
-+
-+ @Param[in,out] ioc_fm_pcd_counters_params_t The requested counter parameters.
-+
-+ @Return        0 on success; Error code otherwise.
-+
-+ @Cautions      Note that it is user's responsibilty to call this routine only
-+                for enabled counters, and there will be no indication if a
-+                disabled counter is accessed.
-+*//***************************************************************************/
-+#define FM_PCD_IOC_GET_COUNTER  _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(9), ioc_fm_pcd_counters_params_t)
-+
-+/**************************************************************************//**
-+
-+ @Function      FM_PCD_KgSchemeGetCounter
-+
-+ @Description   Reads scheme packet counter.
-+
-+ @Param[in]     h_Scheme        scheme handle as returned by FM_PCD_KgSchemeSet().
-+
-+ @Return        Counter's current value.
-+
-+ @Cautions      Allowed only following FM_PCD_Init() & FM_PCD_KgSchemeSet().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_KG_SCHEME_GET_CNTR_COMPAT  _IOR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(4), ioc_compat_fm_pcd_kg_scheme_spc_t)
-+#endif
-+#define FM_PCD_IOC_KG_SCHEME_GET_CNTR  _IOR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(4), ioc_fm_pcd_kg_scheme_spc_t)
-+
-+#if 0
-+TODO: unused IOCTL
-+/**************************************************************************//**
-+ @Function      FM_PCD_ModifyCounter
-+
-+ @Description   Writes a value to an enabled counter. Use "0" to reset the counter.
-+
-+ @Param[in]     ioc_fm_pcd_counters_params_t - The requested counter parameters.
-+
-+ @Return        0 on success; Error code otherwise.
-+*//***************************************************************************/
-+#define FM_PCD_IOC_MODIFY_COUNTER   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(10), ioc_fm_pcd_counters_params_t)
-+#define FM_PCD_IOC_SET_COUNTER      FM_PCD_IOC_MODIFY_COUNTER
-+#endif
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ForceIntr
-+
-+ @Description   Causes an interrupt event on the requested source.
-+
-+ @Param[in]     ioc_fm_pcd_exceptions - An exception to be forced.
-+
-+ @Return        0 on success; error code if the exception is not enabled,
-+                or is not able to create interrupt.
-+*//***************************************************************************/
-+#define FM_PCD_IOC_FORCE_INTR _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(11), ioc_fm_pcd_exceptions)
-+
-+/**************************************************************************//**
-+ @Collection    Definitions of coarse classification parameters as required by KeyGen
-+                (when coarse classification is the next engine after this scheme).
-+*//***************************************************************************/
-+#define IOC_FM_PCD_MAX_NUM_OF_CC_TREES              8
-+#define IOC_FM_PCD_MAX_NUM_OF_CC_GROUPS             16
-+#define IOC_FM_PCD_MAX_NUM_OF_CC_UNITS              4
-+#define IOC_FM_PCD_MAX_NUM_OF_KEYS                  256
-+#define IOC_FM_PCD_MAX_NUM_OF_FLOWS                 (4*KILOBYTE)
-+#define IOC_FM_PCD_MAX_SIZE_OF_KEY                  56
-+#define IOC_FM_PCD_MAX_NUM_OF_CC_ENTRIES_IN_GRP     16
-+#define IOC_FM_PCD_LAST_KEY_INDEX                   0xffff
-+#define IOC_FM_PCD_MANIP_DSCP_VALUES                64
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Collection    A set of definitions to allow protocol
-+                special option description.
-+*//***************************************************************************/
-+typedef uint32_t            ioc_protocol_opt_t;      /**< A general type to define a protocol option. */
-+
-+typedef ioc_protocol_opt_t  ioc_eth_protocol_opt_t;  /**< Ethernet protocol options. */
-+#define IOC_ETH_BROADCAST               0x80000000   /**< Ethernet Broadcast. */
-+#define IOC_ETH_MULTICAST               0x40000000   /**< Ethernet Multicast. */
-+
-+typedef ioc_protocol_opt_t  ioc_vlan_protocol_opt_t; /**< Vlan protocol options. */
-+#define IOC_VLAN_STACKED                0x20000000   /**< Stacked VLAN. */
-+
-+typedef ioc_protocol_opt_t  ioc_mpls_protocol_opt_t; /**< MPLS protocol options. */
-+#define IOC_MPLS_STACKED                0x10000000   /**< Stacked MPLS. */
-+
-+typedef ioc_protocol_opt_t  ioc_ipv4_protocol_opt_t; /**< IPv4 protocol options. */
-+#define IOC_IPV4_BROADCAST_1            0x08000000   /**< IPv4 Broadcast. */
-+#define IOC_IPV4_MULTICAST_1            0x04000000   /**< IPv4 Multicast. */
-+#define IOC_IPV4_UNICAST_2              0x02000000   /**< Tunneled IPv4 - Unicast. */
-+#define IOC_IPV4_MULTICAST_BROADCAST_2  0x01000000   /**< Tunneled IPv4 - Broadcast/Multicast. */
-+
-+#define IOC_IPV4_FRAG_1                 0x00000008   /**< IPV4 reassembly option.
-+                                                          IPV4 Reassembly manipulation requires network
-+                                                          environment with IPV4 header and IPV4_FRAG_1 option  */
-+
-+typedef ioc_protocol_opt_t  ioc_ipv6_protocol_opt_t; /**< IPv6 protocol options. */
-+#define IOC_IPV6_MULTICAST_1            0x00800000   /**< IPv6 Multicast. */
-+#define IOC_IPV6_UNICAST_2              0x00400000   /**< Tunneled IPv6 - Unicast. */
-+#define IOC_IPV6_MULTICAST_2            0x00200000   /**< Tunneled IPv6 - Multicast. */
-+
-+#define IOC_IPV6_FRAG_1                 0x00000004   /**< IPV6 reassembly option.
-+                                                          IPV6 Reassembly manipulation requires network
-+                                                          environment with IPV6 header and IPV6_FRAG_1 option  */
-+#if (DPAA_VERSION >= 11)
-+typedef ioc_protocol_opt_t   ioc_capwap_protocol_opt_t;      /**< CAPWAP protocol options. */
-+#define CAPWAP_FRAG_1               0x00000008  /**< CAPWAP reassembly option.
-+                                                     CAPWAP Reassembly manipulation requires network
-+                                                     environment with CAPWAP header and CAPWAP_FRAG_1 option;
-+                                                     in case where fragment found, the fragment-extension offset
-+                                                     may be found at 'shim2' (in parser-result). */
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/* @} */
-+
-+#define IOC_FM_PCD_MANIP_MAX_HDR_SIZE               256
-+#define IOC_FM_PCD_MANIP_DSCP_TO_VLAN_TRANS         64
-+/**************************************************************************//**
-+ @Collection    A set of definitions to support Header Manipulation selection.
-+*//***************************************************************************/
-+typedef uint32_t                        ioc_hdr_manip_flags_t;              /**< A general type to define a HMan update command flags. */
-+
-+typedef ioc_hdr_manip_flags_t           ioc_ipv4_hdr_manip_update_flags_t;  /**< IPv4 protocol HMan update command flags. */
-+
-+#define IOC_HDR_MANIP_IPV4_TOS          0x80000000          /**< update TOS with the given value ('tos' field
-+                                                                 of ioc_fm_pcd_manip_hdr_field_update_ipv4_t) */
-+#define IOC_HDR_MANIP_IPV4_ID           0x40000000          /**< update IP ID with the given value ('id' field
-+                                                                 of ioc_fm_pcd_manip_hdr_field_update_ipv4_t) */
-+#define IOC_HDR_MANIP_IPV4_TTL          0x20000000          /**< Decrement TTL by 1 */
-+#define IOC_HDR_MANIP_IPV4_SRC          0x10000000          /**< update IP source address with the given value
-+                                                                 ('src' field of ioc_fm_pcd_manip_hdr_field_update_ipv4_t) */
-+#define IOC_HDR_MANIP_IPV4_DST          0x08000000          /**< update IP destination address with the given value
-+                                                                 ('dst' field of ioc_fm_pcd_manip_hdr_field_update_ipv4_t) */
-+
-+typedef ioc_hdr_manip_flags_t           ioc_ipv6_hdr_manip_update_flags_t;  /**< IPv6 protocol HMan update command flags. */
-+
-+#define IOC_HDR_MANIP_IPV6_TC           0x80000000          /**< update Traffic Class address with the given value
-+                                                                 ('traffic_class' field of ioc_fm_pcd_manip_hdr_field_update_ipv6_t) */
-+#define IOC_HDR_MANIP_IPV6_HL           0x40000000          /**< Decrement Hop Limit by 1 */
-+#define IOC_HDR_MANIP_IPV6_SRC          0x20000000          /**< update IP source address with the given value
-+                                                                 ('src' field of ioc_fm_pcd_manip_hdr_field_update_ipv6_t) */
-+#define IOC_HDR_MANIP_IPV6_DST          0x10000000          /**< update IP destination address with the given value
-+                                                                 ('dst' field of ioc_fm_pcd_manip_hdr_field_update_ipv6_t) */
-+
-+typedef ioc_hdr_manip_flags_t           ioc_tcp_udp_hdr_manip_update_flags_t;/**< TCP/UDP protocol HMan update command flags. */
-+
-+#define IOC_HDR_MANIP_TCP_UDP_SRC       0x80000000          /**< update TCP/UDP source address with the given value
-+                                                                 ('src' field of ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t) */
-+#define IOC_HDR_MANIP_TCP_UDP_DST       0x40000000          /**< update TCP/UDP destination address with the given value
-+                                                                 ('dst' field of ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t) */
-+#define IOC_HDR_MANIP_TCP_UDP_CHECKSUM  0x20000000          /**< update TCP/UDP checksum */
-+
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Description   A type used for returning the order of the key extraction.
-+                each value in this array represents the index of the extraction
-+                command as defined by the user in the initialization extraction array.
-+                The valid size of this array is the user define number of extractions
-+                required (also marked by the second '0' in this array).
-+*//***************************************************************************/
-+typedef    uint8_t    ioc_fm_pcd_kg_key_order_t [IOC_FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY];
-+
-+/**************************************************************************//**
-+ @Description   All PCD engines
-+                (must match enum e_FmPcdEngine defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_engine {
-+    e_IOC_FM_PCD_INVALID = 0,   /**< Invalid PCD engine */
-+    e_IOC_FM_PCD_DONE,          /**< No PCD Engine indicated */
-+    e_IOC_FM_PCD_KG,            /**< KeyGen */
-+    e_IOC_FM_PCD_CC,            /**< Coarse Classifier */
-+    e_IOC_FM_PCD_PLCR,          /**< Policer */
-+    e_IOC_FM_PCD_PRS,           /**< Parser */
-+#if DPAA_VERSION >= 11
-+    e_IOC_FM_PCD_FR,            /**< Frame Replicator */
-+#endif /* DPAA_VERSION >= 11 */
-+    e_IOC_FM_PCD_HASH           /**< Hash Table */
-+} ioc_fm_pcd_engine;
-+
-+/**************************************************************************//**
-+ @Description   An enum for selecting extraction by header types
-+                (Must match enum e_FmPcdExtractByHdrType defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_extract_by_hdr_type {
-+    e_IOC_FM_PCD_EXTRACT_FROM_HDR,      /**< Extract bytes from header */
-+    e_IOC_FM_PCD_EXTRACT_FROM_FIELD,    /**< Extract bytes from header field */
-+    e_IOC_FM_PCD_EXTRACT_FULL_FIELD     /**< Extract a full field */
-+} ioc_fm_pcd_extract_by_hdr_type;
-+
-+/**************************************************************************//**
-+ @Description   An enum for selecting extraction source (when it is not the header)
-+                (Must match enum e_FmPcdExtractFrom defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_extract_from {
-+    e_IOC_FM_PCD_EXTRACT_FROM_FRAME_START,          /**< KG & CC: Extract from beginning of frame */
-+    e_IOC_FM_PCD_EXTRACT_FROM_DFLT_VALUE,           /**< KG only: Extract from a default value */
-+    e_IOC_FM_PCD_EXTRACT_FROM_CURR_END_OF_PARSE,    /**< KG only: Extract from the point where parsing had finished */
-+    e_IOC_FM_PCD_EXTRACT_FROM_KEY,                  /**< CC only: Field where saved KEY */
-+    e_IOC_FM_PCD_EXTRACT_FROM_HASH,                 /**< CC only: Field where saved HASH */
-+    e_IOC_FM_PCD_EXTRACT_FROM_PARSE_RESULT,         /**< KG & CC: Extract from the parser result */
-+    e_IOC_FM_PCD_EXTRACT_FROM_ENQ_FQID,             /**< KG & CC: Extract from enqueue FQID */
-+    e_IOC_FM_PCD_EXTRACT_FROM_FLOW_ID               /**< CC only: Field where saved Dequeue FQID */
-+} ioc_fm_pcd_extract_from;
-+
-+/**************************************************************************//**
-+ @Description   An enum for selecting extraction type
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_extract_type {
-+    e_IOC_FM_PCD_EXTRACT_BY_HDR,                /**< Extract according to header */
-+    e_IOC_FM_PCD_EXTRACT_NON_HDR,               /**< Extract from data that is not the header */
-+    e_IOC_FM_PCD_KG_EXTRACT_PORT_PRIVATE_INFO   /**< Extract private info as specified by user */
-+} ioc_fm_pcd_extract_type;
-+
-+/**************************************************************************//**
-+ @Description   An enum for selecting a default
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_kg_extract_dflt_select {
-+    e_IOC_FM_PCD_KG_DFLT_GBL_0,          /**< Default selection is KG register 0 */
-+    e_IOC_FM_PCD_KG_DFLT_GBL_1,          /**< Default selection is KG register 1 */
-+    e_IOC_FM_PCD_KG_DFLT_PRIVATE_0,      /**< Default selection is a per scheme register 0 */
-+    e_IOC_FM_PCD_KG_DFLT_PRIVATE_1,      /**< Default selection is a per scheme register 1 */
-+    e_IOC_FM_PCD_KG_DFLT_ILLEGAL         /**< Illegal selection */
-+} ioc_fm_pcd_kg_extract_dflt_select;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type defining all default groups - each group shares
-+                a default value, one of four user-initialized values.
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_kg_known_fields_dflt_types {
-+    e_IOC_FM_PCD_KG_MAC_ADDR,               /**< MAC Address */
-+    e_IOC_FM_PCD_KG_TCI,                    /**< TCI field */
-+    e_IOC_FM_PCD_KG_ENET_TYPE,              /**< ENET Type */
-+    e_IOC_FM_PCD_KG_PPP_SESSION_ID,         /**< PPP Session id */
-+    e_IOC_FM_PCD_KG_PPP_PROTOCOL_ID,        /**< PPP Protocol id */
-+    e_IOC_FM_PCD_KG_MPLS_LABEL,             /**< MPLS label */
-+    e_IOC_FM_PCD_KG_IP_ADDR,                /**< IP addr */
-+    e_IOC_FM_PCD_KG_PROTOCOL_TYPE,          /**< Protocol type */
-+    e_IOC_FM_PCD_KG_IP_TOS_TC,              /**< TOS or TC */
-+    e_IOC_FM_PCD_KG_IPV6_FLOW_LABEL,        /**< IPV6 flow label */
-+    e_IOC_FM_PCD_KG_IPSEC_SPI,              /**< IPSEC SPI */
-+    e_IOC_FM_PCD_KG_L4_PORT,                /**< L4 Port */
-+    e_IOC_FM_PCD_KG_TCP_FLAG,               /**< TCP Flag */
-+    e_IOC_FM_PCD_KG_GENERIC_FROM_DATA,      /**< grouping implemented by SW,
-+                                                 any data extraction that is not the full
-+                                                 field described above  */
-+    e_IOC_FM_PCD_KG_GENERIC_FROM_DATA_NO_V, /**< grouping implemented by SW,
-+                                                 any data extraction without validation */
-+    e_IOC_FM_PCD_KG_GENERIC_NOT_FROM_DATA   /**< grouping implemented by SW,
-+                                                 extraction from parser result or
-+                                                 direct use of default value  */
-+} ioc_fm_pcd_kg_known_fields_dflt_types;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for defining header index for scenarios with
-+                multiple (tunneled) headers
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_hdr_index {
-+    e_IOC_FM_PCD_HDR_INDEX_NONE     =   0,      /**< used when multiple headers not used, also
-+                                                     to specify regular IP (not tunneled). */
-+    e_IOC_FM_PCD_HDR_INDEX_1,                   /**< may be used for VLAN, MPLS, tunneled IP */
-+    e_IOC_FM_PCD_HDR_INDEX_2,                   /**< may be used for MPLS, tunneled IP */
-+    e_IOC_FM_PCD_HDR_INDEX_3,                   /**< may be used for MPLS */
-+    e_IOC_FM_PCD_HDR_INDEX_LAST     =   0xFF    /**< may be used for VLAN, MPLS */
-+} ioc_fm_pcd_hdr_index;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting the policer profile functional type
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_profile_type_selection {
-+    e_IOC_FM_PCD_PLCR_PORT_PRIVATE,             /**< Port dedicated profile */
-+    e_IOC_FM_PCD_PLCR_SHARED                    /**< Shared profile (shared within partition) */
-+} ioc_fm_pcd_profile_type_selection;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting the policer profile algorithm
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_plcr_algorithm_selection {
-+    e_IOC_FM_PCD_PLCR_PASS_THROUGH, /**< Policer pass through */
-+    e_IOC_FM_PCD_PLCR_RFC_2698,     /**< Policer algorithm RFC 2698 */
-+    e_IOC_FM_PCD_PLCR_RFC_4115      /**< Policer algorithm RFC 4115 */
-+} ioc_fm_pcd_plcr_algorithm_selection;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting a policer profile color mode
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_plcr_color_mode {
-+    e_IOC_FM_PCD_PLCR_COLOR_BLIND,  /**< Color blind */
-+    e_IOC_FM_PCD_PLCR_COLOR_AWARE   /**< Color aware */
-+} ioc_fm_pcd_plcr_color_mode;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting a policer profile color
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_plcr_color {
-+    e_IOC_FM_PCD_PLCR_GREEN,    /**< Green */
-+    e_IOC_FM_PCD_PLCR_YELLOW,   /**< Yellow */
-+    e_IOC_FM_PCD_PLCR_RED,      /**< Red */
-+    e_IOC_FM_PCD_PLCR_OVERRIDE  /**< Color override */
-+} ioc_fm_pcd_plcr_color;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting the policer profile packet frame length selector
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_plcr_frame_length_select {
-+  e_IOC_FM_PCD_PLCR_L2_FRM_LEN,     /**< L2 frame length */
-+  e_IOC_FM_PCD_PLCR_L3_FRM_LEN,     /**< L3 frame length */
-+  e_IOC_FM_PCD_PLCR_L4_FRM_LEN,     /**< L4 frame length */
-+  e_IOC_FM_PCD_PLCR_FULL_FRM_LEN    /**< Full frame length */
-+} ioc_fm_pcd_plcr_frame_length_select;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting roll-back frame
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_plcr_roll_back_frame_select {
-+  e_IOC_FM_PCD_PLCR_ROLLBACK_L2_FRM_LEN,    /**< Rollback L2 frame length */
-+  e_IOC_FM_PCD_PLCR_ROLLBACK_FULL_FRM_LEN   /**< Rollback Full frame length */
-+} ioc_fm_pcd_plcr_roll_back_frame_select;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting the policer profile packet or byte mode
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_plcr_rate_mode {
-+    e_IOC_FM_PCD_PLCR_BYTE_MODE,    /**< Byte mode */
-+    e_IOC_FM_PCD_PLCR_PACKET_MODE   /**< Packet mode */
-+} ioc_fm_pcd_plcr_rate_mode;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for defining action of frame
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_done_action {
-+    e_IOC_FM_PCD_ENQ_FRAME = 0,     /**< Enqueue frame */
-+    e_IOC_FM_PCD_DROP_FRAME         /**< Drop frame */
-+} ioc_fm_pcd_done_action;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting the policer counter
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_plcr_profile_counters {
-+    e_IOC_FM_PCD_PLCR_PROFILE_GREEN_PACKET_TOTAL_COUNTER,               /**< Green packets counter */
-+    e_IOC_FM_PCD_PLCR_PROFILE_YELLOW_PACKET_TOTAL_COUNTER,              /**< Yellow packets counter */
-+    e_IOC_FM_PCD_PLCR_PROFILE_RED_PACKET_TOTAL_COUNTER,                 /**< Red packets counter */
-+    e_IOC_FM_PCD_PLCR_PROFILE_RECOLOURED_YELLOW_PACKET_TOTAL_COUNTER,   /**< Recolored yellow packets counter */
-+    e_IOC_FM_PCD_PLCR_PROFILE_RECOLOURED_RED_PACKET_TOTAL_COUNTER       /**< Recolored red packets counter */
-+} ioc_fm_pcd_plcr_profile_counters;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting the PCD action after extraction
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_action {
-+    e_IOC_FM_PCD_ACTION_NONE,                           /**< NONE  */
-+    e_IOC_FM_PCD_ACTION_EXACT_MATCH,                    /**< Exact match on the selected extraction*/
-+    e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP                  /**< Indexed lookup on the selected extraction*/
-+} ioc_fm_pcd_action;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of insert manipulation
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_hdr_insrt_type {
-+    e_IOC_FM_PCD_MANIP_INSRT_GENERIC,                   /**< Insert according to offset & size */
-+    e_IOC_FM_PCD_MANIP_INSRT_BY_HDR,                    /**< Insert according to protocol */
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+    e_IOC_FM_PCD_MANIP_INSRT_BY_TEMPLATE                /**< Insert template to start of frame */
-+#endif /* FM_CAPWAP_SUPPORT */
-+} ioc_fm_pcd_manip_hdr_insrt_type;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of remove manipulation
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_hdr_rmv_type {
-+    e_IOC_FM_PCD_MANIP_RMV_GENERIC,                     /**< Remove according to offset & size */
-+    e_IOC_FM_PCD_MANIP_RMV_BY_HDR                       /**< Remove according to offset & size */
-+} ioc_fm_pcd_manip_hdr_rmv_type;
-+
-+/**************************************************************************//**
-+ @Description   An enum for selecting specific L2 fields removal
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_hdr_rmv_specific_l2 {
-+    e_IOC_FM_PCD_MANIP_HDR_RMV_ETHERNET,                /**< Ethernet/802.3 MAC */
-+    e_IOC_FM_PCD_MANIP_HDR_RMV_STACKED_QTAGS,           /**< stacked QTags */
-+    e_IOC_FM_PCD_MANIP_HDR_RMV_ETHERNET_AND_MPLS,       /**< MPLS and Ethernet/802.3 MAC header until
-+                                                             the header which follows the MPLS header */
-+    e_IOC_FM_PCD_MANIP_HDR_RMV_MPLS                     /**< Remove MPLS header (Unlimited MPLS labels) */
-+} ioc_fm_pcd_manip_hdr_rmv_specific_l2;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting specific fields updates
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_hdr_field_update_type {
-+    e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN,           /**< VLAN updates */
-+    e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV4,           /**< IPV4 updates */
-+    e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV6,           /**< IPV6 updates */
-+    e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_TCP_UDP,        /**< TCP_UDP updates */
-+} ioc_fm_pcd_manip_hdr_field_update_type;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting VLAN updates
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_hdr_field_update_vlan {
-+    e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN_VPRI,      /**< Replace VPri of outer most VLAN tag. */
-+    e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN    /**< DSCP to VLAN priority bits translation */
-+} ioc_fm_pcd_manip_hdr_field_update_vlan;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting specific L2 fields removal
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_hdr_insrt_specific_l2 {
-+    e_IOC_FM_PCD_MANIP_HDR_INSRT_MPLS                   /**< Insert MPLS header (Unlimited MPLS labels) */
-+} ioc_fm_pcd_manip_hdr_insrt_specific_l2;
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting QoS mapping mode
-+
-+                Note: In all cases except 'e_FM_PCD_MANIP_HDR_QOS_MAPPING_NONE'
-+                User should instruct the port to read the parser-result
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_hdr_qos_mapping_mode {
-+    e_IOC_FM_PCD_MANIP_HDR_QOS_MAPPING_NONE = 0, /**< No mapping, QoS field will not be changed */
-+    e_IOC_FM_PCD_MANIP_HDR_QOS_MAPPING_AS_IS, /**< QoS field will be overwritten by the last byte in the parser-result. */
-+} ioc_fm_pcd_manip_hdr_qos_mapping_mode;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting QoS source
-+
-+                Note: In all cases except 'e_FM_PCD_MANIP_HDR_QOS_SRC_NONE'
-+                User should left room for the parser-result on input/output buffer
-+                and instruct the port to read/write the parser-result to the buffer (RPD should be set)
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_hdr_qos_src {
-+    e_IOC_FM_PCD_MANIP_HDR_QOS_SRC_NONE = 0, /**< TODO */
-+    e_IOC_FM_PCD_MANIP_HDR_QOS_SRC_USER_DEFINED, /**< QoS will be taken from the last byte in the parser-result. */
-+} ioc_fm_pcd_manip_hdr_qos_src;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of header insertion
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_hdr_insrt_by_hdr_type {
-+    e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_SPECIFIC_L2,         /**< Specific L2 fields insertion */
-+#if (DPAA_VERSION >= 11)
-+    e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_IP,                 /**< IP insertion */
-+    e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_UDP,                /**< UDP insertion */
-+    e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE,             /**< UDP lite insertion */
-+    e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_CAPWAP                 /**< CAPWAP insertion */
-+#endif /* (DPAA_VERSION >= 11) */
-+} ioc_fm_pcd_manip_hdr_insrt_by_hdr_type;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting specific custom command
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_hdr_custom_type {
-+    e_IOC_FM_PCD_MANIP_HDR_CUSTOM_IP_REPLACE,           /**< Replace IPv4/IPv6 */
-+} ioc_fm_pcd_manip_hdr_custom_type;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting specific custom command
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_hdr_custom_ip_replace {
-+    e_IOC_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV4_BY_IPV6, /**< Replace IPv4 by IPv6 */
-+    e_IOC_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV6_BY_IPV4  /**< Replace IPv6 by IPv4 */
-+} ioc_fm_pcd_manip_hdr_custom_ip_replace;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of header removal
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_hdr_rmv_by_hdr_type {
-+    e_IOC_FM_PCD_MANIP_RMV_BY_HDR_SPECIFIC_L2 = 0,       /**< Specific L2 fields removal */
-+#if (DPAA_VERSION >= 11)
-+    e_IOC_FM_PCD_MANIP_RMV_BY_HDR_CAPWAP,                  /**< CAPWAP removal */
-+#endif /* (DPAA_VERSION >= 11) */
-+#if (DPAA_VERSION >= 11) || ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+    e_IOC_FM_PCD_MANIP_RMV_BY_HDR_FROM_START,           /**< Locate from data that is not the header */
-+#endif /* (DPAA_VERSION >= 11) || ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
-+} ioc_fm_pcd_manip_hdr_rmv_by_hdr_type;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of timeout mode
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_reassem_time_out_mode {
-+    e_IOC_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAMES,         /**< Limits the time of the reassembly process
-+                                                             from the first fragment to the last */
-+    e_IOC_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAG            /**< Limits the time of receiving the fragment */
-+} ioc_fm_pcd_manip_reassem_time_out_mode;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of WaysNumber mode
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_reassem_ways_number {
-+    e_IOC_FM_PCD_MANIP_ONE_WAY_HASH = 1,    /**< One way hash    */
-+    e_IOC_FM_PCD_MANIP_TWO_WAYS_HASH,       /**< Two ways hash   */
-+    e_IOC_FM_PCD_MANIP_THREE_WAYS_HASH,     /**< Three ways hash */
-+    e_IOC_FM_PCD_MANIP_FOUR_WAYS_HASH,      /**< Four ways hash  */
-+    e_IOC_FM_PCD_MANIP_FIVE_WAYS_HASH,      /**< Five ways hash  */
-+    e_IOC_FM_PCD_MANIP_SIX_WAYS_HASH,       /**< Six ways hash   */
-+    e_IOC_FM_PCD_MANIP_SEVEN_WAYS_HASH,     /**< Seven ways hash */
-+    e_IOC_FM_PCD_MANIP_EIGHT_WAYS_HASH      /**< Eight ways hash */
-+} ioc_fm_pcd_manip_reassem_ways_number;
-+
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of statistics mode
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_stats {
-+    e_IOC_FM_PCD_STATS_PER_FLOWID = 0       /**< Flow ID is used as index for getting statistics */
-+} ioc_fm_pcd_stats;
-+#endif
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting manipulation type
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_type {
-+    e_IOC_FM_PCD_MANIP_HDR = 0,             /**< Header manipulation */
-+    e_IOC_FM_PCD_MANIP_REASSEM,             /**< Reassembly */
-+    e_IOC_FM_PCD_MANIP_FRAG,                /**< Fragmentation */
-+    e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD      /**< Special Offloading */
-+} ioc_fm_pcd_manip_type;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of statistics mode
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_cc_stats_mode {
-+    e_IOC_FM_PCD_CC_STATS_MODE_NONE = 0,        /**< No statistics support */
-+    e_IOC_FM_PCD_CC_STATS_MODE_FRAME,           /**< Frame count statistics */
-+    e_IOC_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME,  /**< Byte and frame count statistics */
-+#if (DPAA_VERSION >= 11)
-+    e_IOC_FM_PCD_CC_STATS_MODE_RMON,            /**< Byte and frame length range count statistics */
-+#endif /* (DPAA_VERSION >= 11) */
-+} ioc_fm_pcd_cc_stats_mode;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for determining the action in case an IP packet
-+                is larger than MTU but its DF (Don't Fragment) bit is set.
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_dont_frag_action {
-+    e_IOC_FM_PCD_MANIP_DISCARD_PACKET = 0,      /**< Discard packet */
-+    e_IOC_FM_PCD_MANIP_ENQ_TO_ERR_Q_OR_DISCARD_PACKET =  e_IOC_FM_PCD_MANIP_DISCARD_PACKET,
-+                                                /**< Obsolete, cannot enqueue to error queue;
-+                                                     In practice, selects to discard packets;
-+                                                     Will be removed in the future */
-+    e_IOC_FM_PCD_MANIP_FRAGMENT_PACKECT,        /**< Fragment packet and continue normal processing */
-+    e_IOC_FM_PCD_MANIP_CONTINUE_WITHOUT_FRAG    /**< Continue normal processing without fragmenting the packet */
-+} ioc_fm_pcd_manip_dont_frag_action;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration type for selecting type of special offload manipulation
-+*//***************************************************************************/
-+typedef enum ioc_fm_pcd_manip_special_offload_type {
-+    e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD_IPSEC,    /**< IPSec offload manipulation */
-+#if (DPAA_VERSION >= 11)
-+    e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD_CAPWAP    /**< CAPWAP offload manipulation */
-+#endif /* (DPAA_VERSION >= 11) */
-+} ioc_fm_pcd_manip_special_offload_type;
-+
-+/**************************************************************************//**
-+ @Description   A union of protocol dependent special options
-+                (Must match union u_FmPcdHdrProtocolOpt defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef union ioc_fm_pcd_hdr_protocol_opt_u {
-+    ioc_eth_protocol_opt_t    eth_opt;     /**< Ethernet options */
-+    ioc_vlan_protocol_opt_t   vlan_opt;    /**< Vlan options */
-+    ioc_mpls_protocol_opt_t   mpls_opt;    /**< MPLS options */
-+    ioc_ipv4_protocol_opt_t   ipv4_opt;    /**< IPv4 options */
-+    ioc_ipv6_protocol_opt_t   ipv6_opt;    /**< IPv6 options */
-+#if (DPAA_VERSION >= 11)
-+    ioc_capwap_protocol_opt_t capwap_opt;  /**< CAPWAP options */
-+#endif /* (DPAA_VERSION >= 11) */
-+} ioc_fm_pcd_hdr_protocol_opt_u;
-+
-+/**************************************************************************//**
-+ @Description   A union holding all known protocol fields
-+*//***************************************************************************/
-+typedef union ioc_fm_pcd_fields_u {
-+    ioc_header_field_eth_t              eth;            /**< Ethernet               */
-+    ioc_header_field_vlan_t             vlan;           /**< VLAN                   */
-+    ioc_header_field_llc_snap_t         llc_snap;       /**< LLC SNAP               */
-+    ioc_header_field_pppoe_t            pppoe;          /**< PPPoE                  */
-+    ioc_header_field_mpls_t             mpls;           /**< MPLS                   */
-+    ioc_header_field_ip_t               ip;             /**< IP                     */
-+    ioc_header_field_ipv4_t             ipv4;           /**< IPv4                   */
-+    ioc_header_field_ipv6_t             ipv6;           /**< IPv6                   */
-+    ioc_header_field_udp_t              udp;            /**< UDP                    */
-+    ioc_header_field_udp_lite_t         udp_lite;       /**< UDP_Lite               */
-+    ioc_header_field_tcp_t              tcp;            /**< TCP                    */
-+    ioc_header_field_sctp_t             sctp;           /**< SCTP                   */
-+    ioc_header_field_dccp_t             dccp;           /**< DCCP                   */
-+    ioc_header_field_gre_t              gre;            /**< GRE                    */
-+    ioc_header_field_minencap_t         minencap;       /**< Minimal Encapsulation  */
-+    ioc_header_field_ipsec_ah_t         ipsec_ah;       /**< IPSec AH               */
-+    ioc_header_field_ipsec_esp_t        ipsec_esp;      /**< IPSec ESP              */
-+    ioc_header_field_udp_encap_esp_t    udp_encap_esp;  /**< UDP Encapsulation ESP  */
-+} ioc_fm_pcd_fields_u;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header extraction for key generation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_from_hdr_t {
-+    uint8_t             size;           /**< Size in byte */
-+    uint8_t             offset;         /**< Byte offset */
-+} ioc_fm_pcd_from_hdr_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining field extraction for key generation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_from_field_t {
-+    ioc_fm_pcd_fields_u field;          /**< Field selection */
-+    uint8_t             size;           /**< Size in byte */
-+    uint8_t             offset;         /**< Byte offset */
-+} ioc_fm_pcd_from_field_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a single network environment unit
-+                A distinction unit should be defined if it will later be used
-+                by one or more PCD engines to distinguish between flows.
-+                (Must match struct t_FmPcdDistinctionUnit defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_distinction_unit_t {
-+    struct {
-+        ioc_net_header_type             hdr;                /**< One of the headers supported by the FM */
-+        ioc_fm_pcd_hdr_protocol_opt_u   opt;                /**< Select only one option! */
-+    } hdrs[IOC_FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS];
-+} ioc_fm_pcd_distinction_unit_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining all different distinction units supported
-+                by a specific PCD Network Environment Characteristics module.
-+
-+                Each unit represent a protocol or a group of protocols that may
-+                be used later by the different PCD engines to distinguish between flows.
-+                (Must match struct t_FmPcdNetEnvParams defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_net_env_params_t {
-+    uint8_t                         num_of_distinction_units;/**< Number of different units to be identified */
-+    ioc_fm_pcd_distinction_unit_t   units[IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS];
-+                                                            /**< An array of num_of_distinction_units of the
-+                                                                     different units to be identified */
-+    void                            *id;                    /**< Output parameter; Returns the net-env Id to be used */
-+} ioc_fm_pcd_net_env_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a single extraction action when
-+                creating a key
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_extract_entry_t {
-+    ioc_fm_pcd_extract_type                 type;           /**< Extraction type select */
-+    union {
-+        struct {
-+            ioc_net_header_type             hdr;            /**< Header selection */
-+            bool                            ignore_protocol_validation;
-+                                                            /**< Ignore protocol validation */
-+            ioc_fm_pcd_hdr_index            hdr_index;      /**< Relevant only for MPLS, VLAN and tunneled
-+                                                                 IP. Otherwise should be cleared.*/
-+            ioc_fm_pcd_extract_by_hdr_type  type;           /**< Header extraction type select */
-+            union {
-+                ioc_fm_pcd_from_hdr_t       from_hdr;       /**< Extract bytes from header parameters */
-+                ioc_fm_pcd_from_field_t     from_field;     /**< Extract bytes from field parameters */
-+                ioc_fm_pcd_fields_u         full_field;     /**< Extract full field parameters */
-+            } extract_by_hdr_type;
-+        } extract_by_hdr;                                   /**< Used when type = e_IOC_FM_PCD_KG_EXTRACT_BY_HDR */
-+        struct {
-+            ioc_fm_pcd_extract_from         src;            /**< Non-header extraction source */
-+            ioc_fm_pcd_action               action;         /**< Relevant for CC Only */
-+            uint16_t                        ic_indx_mask;   /**< Relevant only for CC when
-+                                                                 action = e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP;
-+                                                                 Note that the number of bits that are set within
-+                                                                 this mask must be log2 of the CC-node 'num_of_keys'.
-+                                                                 Note that the mask cannot be set on the lower bits. */
-+            uint8_t                         offset;         /**< Byte offset */
-+            uint8_t                         size;           /**< Size in bytes */
-+        } extract_non_hdr;                                  /**< Used when type = e_IOC_FM_PCD_KG_EXTRACT_NON_HDR */
-+    } extract_params;
-+} ioc_fm_pcd_extract_entry_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining masks for each extracted
-+                field in the key.
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_kg_extract_mask_t {
-+    uint8_t                extract_array_index;         /**< Index in the extraction array, as initialized by user */
-+    uint8_t                offset;                      /**< Byte offset */
-+    uint8_t                mask;                        /**< A byte mask (selected bits will be ignored) */
-+} ioc_fm_pcd_kg_extract_mask_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining default selection per groups
-+                of fields
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_kg_extract_dflt_t {
-+    ioc_fm_pcd_kg_known_fields_dflt_types    type;          /**< Default type select*/
-+    ioc_fm_pcd_kg_extract_dflt_select        dflt_select;   /**< Default register select */
-+} ioc_fm_pcd_kg_extract_dflt_t;
-+
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining all parameters needed for
-+                generation a key and using a hash function
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_kg_key_extract_and_hash_params_t {
-+    uint32_t                            private_dflt0;          /**< Scheme default register 0 */
-+    uint32_t                            private_dflt1;          /**< Scheme default register 1 */
-+    uint8_t                             num_of_used_extracts;   /**< defines the valid size of the following array */
-+    ioc_fm_pcd_extract_entry_t          extract_array [IOC_FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY];
-+                                                                /**< An array of extraction definitions. */
-+    uint8_t                             num_of_used_dflts;      /**< defines the valid size of the following array */
-+    ioc_fm_pcd_kg_extract_dflt_t        dflts[IOC_FM_PCD_KG_NUM_OF_DEFAULT_GROUPS];
-+                                                                /**< For each extraction used in this scheme, specify the required
-+                                                                     default register to be used when header is not found.
-+                                                                     types not specified in this array will get undefined value. */
-+    uint8_t                             num_of_used_masks;      /**< Defines the valid size of the following array */
-+    ioc_fm_pcd_kg_extract_mask_t        masks[IOC_FM_PCD_KG_NUM_OF_EXTRACT_MASKS];
-+    uint8_t                             hash_shift;             /**< Hash result right shift.
-+                                                                     Selects the 24 bits out of the 64 hash result.
-+                                                                     0 means using the 24 LSB's, otherwise use the
-+                                                                     24 LSB's after shifting right.*/
-+    uint32_t                            hash_distribution_num_of_fqids; /**< must be > 1 and a power of 2. Represents the range
-+                                                                             of queues for the key and hash functionality */
-+    uint8_t                             hash_distribution_fqids_shift;  /**< selects the FQID bits that will be effected by the hash */
-+    bool                                symmetric_hash;         /**< TRUE to generate the same hash for frames with swapped source and
-+                                                                     destination fields on all layers; If TRUE, driver will check that for
-+                                                                     all layers, if SRC extraction is selected, DST extraction must also be
-+                                                                     selected, and vice versa. */
-+} ioc_fm_pcd_kg_key_extract_and_hash_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure of parameters for defining a single
-+                Qid mask (extracted OR).
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_kg_extracted_or_params_t {
-+    ioc_fm_pcd_extract_type                 type;               /**< Extraction type select */
-+    union {
-+        struct {                                                 /**< used when type = e_IOC_FM_PCD_KG_EXTRACT_BY_HDR */
-+            ioc_net_header_type             hdr;
-+            ioc_fm_pcd_hdr_index            hdr_index;          /**< Relevant only for MPLS, VLAN and tunneled
-+                                                                     IP. Otherwise should be cleared.*/
-+            bool                            ignore_protocol_validation;
-+
-+        } extract_by_hdr;
-+        ioc_fm_pcd_extract_from             src;                /**< used when type = e_IOC_FM_PCD_KG_EXTRACT_NON_HDR */
-+    } extract_params;
-+    uint8_t                                 extraction_offset;  /**< Offset for extraction */
-+    ioc_fm_pcd_kg_extract_dflt_select       dflt_value;         /**< Select register from which extraction is taken if
-+                                                                     field not found */
-+    uint8_t                                 mask;               /**< Mask LSB byte of extraction (specified bits are ignored) */
-+    uint8_t                         bit_offset_in_fqid;    /**< 0-31, Selects which bits of the 24 FQID bits to effect using
-+                                                             the extracted byte; Assume byte is placed as the 8 MSB's in
-+                                                             a 32 bit word where the lower bits
-+                                                             are the FQID; i.e if bitOffsetInFqid=1 than its LSB
-+                                                             will effect the FQID MSB, if bitOffsetInFqid=24 than the
-+                                                             extracted byte will effect the 8 LSB's of the FQID,
-+                                                             if bitOffsetInFqid=31 than the byte's MSB will effect
-+                                                             the FQID's LSB; 0 means - no effect on FQID;
-+                                                             Note that one, and only one of
-+                                                             bitOffsetInFqid or bitOffsetInPlcrProfile must be set (i.e,
-+                                                             extracted byte must effect either FQID or Policer profile).*/
-+    uint8_t                         bit_offset_in_plcr_profile;
-+                                                        /**< 0-15, Selects which bits of the 8 policer profile id bits to
-+                                                             effect using the extracted byte; Assume byte is placed
-+                                                             as the 8 MSB's in a 16 bit word where the lower bits
-+                                                             are the policer profile id; i.e if bitOffsetInPlcrProfile=1
-+                                                             than its LSB will effect the profile MSB, if bitOffsetInFqid=8
-+                                                             than the extracted byte will effect the whole policer profile id,
-+                                                             if bitOffsetInFqid=15 than the byte's MSB will effect
-+                                                             the Policer Profile id's LSB;
-+                                                             0 means - no effect on policer profile; Note that one, and only one of
-+                                                             bitOffsetInFqid or bitOffsetInPlcrProfile must be set (i.e,
-+                                                             extracted byte must effect either FQID or Policer profile).*/
-+} ioc_fm_pcd_kg_extracted_or_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for configuring scheme counter
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_kg_scheme_counter_t {
-+    bool        update;     /**< FALSE to keep the current counter state
-+                                 and continue from that point, TRUE to update/reset
-+                                 the counter when the scheme is written. */
-+    uint32_t    value;      /**< If update=TRUE, this value will be written into the
-+                                 counter; clear this field to reset the counter. */
-+} ioc_fm_pcd_kg_scheme_counter_t;
-+
-+
-+/**************************************************************************//**
-+ @Description   A structure for retrieving FMKG_SE_SPC
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_kg_scheme_spc_t {
-+    uint32_t    val;       /**< return value */
-+    void        *id;       /**< scheme handle */
-+} ioc_fm_pcd_kg_scheme_spc_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining policer profile parameters as required by keygen
-+                (when policer is the next engine after this scheme).
-+                (Must match struct t_FmPcdKgPlcrProfile defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_kg_plcr_profile_t {
-+    bool                shared_profile;                 /**< TRUE if this profile is shared between ports
-+                                                             (i.e. managed by master partition) May not be TRUE
-+                                                             if profile is after Coarse Classification*/
-+    bool                direct;                         /**< If TRUE, direct_relative_profile_id only selects the profile
-+                                                             id, if FALSE fqid_offset_relative_profile_id_base is used
-+                                                             together with fqid_offset_shift and num_of_profiles
-+                                                             parameters, to define a range of profiles from
-+                                                             which the KeyGen result will determine the
-+                                                             destination policer profile.  */
-+    union {
-+        uint16_t        direct_relative_profile_id;     /**< Used if 'direct' is TRUE, to select policer profile.
-+                                                             This parameter should indicate the policer profile offset within the port's
-+                                                             policer profiles or SHARED window. */
-+        struct {
-+            uint8_t     fqid_offset_shift;              /**< Shift of KG results without the qid base */
-+            uint8_t     fqid_offset_relative_profile_id_base;
-+                                                        /**< OR of KG results without the qid base
-+                                                             This parameter should indicate the policer profile
-+                                                             offset within the port's policer profiles window
-+                                                             or SHARED window depends on shared_profile */
-+            uint8_t     num_of_profiles;                /**< Range of profiles starting at base */
-+        } indirect_profile;                             /**< Indirect profile parameters */
-+    } profile_select;                                   /**< Direct/indirect profile selection and parameters */
-+} ioc_fm_pcd_kg_plcr_profile_t;
-+
-+#if DPAA_VERSION >= 11
-+/**************************************************************************//**
-+ @Description   Parameters for configuring a storage profile for a KeyGen scheme.
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_kg_storage_profile_t {
-+    bool                direct;                     /**< If TRUE, directRelativeProfileId only selects the
-+                                                         profile id;
-+                                                         If FALSE, fqidOffsetRelativeProfileIdBase is used
-+                                                         together with fqidOffsetShift and numOfProfiles
-+                                                         parameters to define a range of profiles from which
-+                                                         the KeyGen result will determine the destination
-+                                                         storage profile. */
-+    union {
-+        uint16_t        direct_relative_profileId;    /**< Used when 'direct' is TRUE, to select a storage profile;
-+                                                         should indicate the storage profile offset within the
-+                                                         port's storage profiles window. */
-+        struct {
-+            uint8_t     fqid_offset_shift;            /**< Shift of KeyGen results without the FQID base */
-+            uint8_t     fqid_offset_relative_profile_id_base;
-+                                                    /**< OR of KeyGen results without the FQID base;
-+                                                         should indicate the policer profile offset within the
-+                                                         port's storage profiles window. */
-+            uint8_t     num_of_profiles;              /**< Range of profiles starting at base. */
-+        } indirect_profile;                          /**< Indirect profile parameters. */
-+    } profile_select;                                /**< Direct/indirect profile selection and parameters. */
-+} ioc_fm_pcd_kg_storage_profile_t;
-+#endif /* DPAA_VERSION >= 11 */
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining CC as the next engine after KeyGen
-+                (Must match struct t_FmPcdKgCc defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_kg_cc_t {
-+    void                            *tree_id;           /**< CC Tree id */
-+    uint8_t                         grp_id;             /**< CC group id within the CC tree */
-+    bool                            plcr_next;          /**< TRUE if after CC, in case of data frame,
-+                                                             policing is required. */
-+    bool                            bypass_plcr_profile_generation;
-+                                                        /**< TRUE to bypass KeyGen policer profile generation;
-+                                                             selected profile is the one set at port initialization. */
-+    ioc_fm_pcd_kg_plcr_profile_t    plcr_profile;       /**< Valid only if plcr_next = TRUE and
-+                                                             bypass_plcr_profile_generation = FALSE */
-+} ioc_fm_pcd_kg_cc_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining initializing a KeyGen scheme
-+                (Must match struct t_FmPcdKgSchemeParams defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_kg_scheme_params_t {
-+    bool                                modify;         /**< TRUE to change an existing scheme */
-+    union {
-+        uint8_t                         relative_scheme_id;
-+                                                        /**< if modify=FALSE: partition-relative scheme id */
-+        void                            *scheme_id;     /**< if modify=TRUE: the id of an existing scheme */
-+    } scm_id;
-+    bool                                always_direct;  /**< This scheme is reached only directly, i.e. no need
-+                                                             for match vector; KeyGen will ignore it when matching */
-+    struct {                                            /**< HL relevant only if always_direct=FALSE */
-+        void                            *net_env_id;    /**< The id of the Network Environment as returned
-+                                                             by FM_PCD_NetEnvCharacteristicsSet() */
-+        uint8_t                         num_of_distinction_units;
-+                                                        /**< Number of NetEnv units listed in unit_ids array */
-+        uint8_t                         unit_ids[IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS];
-+                                                        /**< Indexes as passed to SetNetEnvCharacteristics (?) array */
-+    } net_env_params;
-+    bool                                use_hash;       /**< use the KG Hash functionality */
-+    ioc_fm_pcd_kg_key_extract_and_hash_params_t key_extract_and_hash_params;
-+                                                        /**< used only if useHash = TRUE */
-+    bool                                bypass_fqid_generation;
-+                                                        /**< Normally - FALSE, TRUE to avoid FQID update in the IC;
-+                                                             In such a case FQID after KG will be the default FQID
-+                                                             defined for the relevant port, or the FQID defined by CC
-+                                                             in cases where CC was the previous engine. */
-+    uint32_t                            base_fqid;      /**< Base FQID; Relevant only if bypass_fqid_generation = FALSE;
-+                                                             If hash is used and an even distribution is expected
-+                                                             according to hash_distribution_num_of_fqids, base_fqid must be aligned to
-+                                                             hash_distribution_num_of_fqids. */
-+    uint8_t                             num_of_used_extracted_ors;
-+                                                        /**< Number of FQID masks listed in extracted_ors array*/
-+    ioc_fm_pcd_kg_extracted_or_params_t extracted_ors[IOC_FM_PCD_KG_NUM_OF_GENERIC_REGS];
-+                                                        /**< IOC_FM_PCD_KG_NUM_OF_GENERIC_REGS
-+                                                             registers are shared between qid_masks
-+                                                             functionality and some of the extraction
-+                                                             actions; Normally only some will be used
-+                                                             for qid_mask. Driver will return error if
-+                                                             resource is full at initialization time. */
-+#if DPAA_VERSION >= 11
-+    bool                                override_storage_profile;
-+                                                        /**< TRUE if KeyGen override previously decided storage profile */
-+    ioc_fm_pcd_kg_storage_profile_t     storage_profile;/**< Used when override_storage_profile=TRUE */
-+#endif /* DPAA_VERSION >= 11 */
-+    ioc_fm_pcd_engine                   next_engine;     /**< may be BMI, PLCR or CC */
-+    union {                                              /**< depends on nextEngine */
-+        ioc_fm_pcd_done_action          done_action;     /**< Used when next engine is BMI (done) */
-+        ioc_fm_pcd_kg_plcr_profile_t    plcr_profile;    /**< Used when next engine is PLCR */
-+        ioc_fm_pcd_kg_cc_t              cc;              /**< Used when next engine is CC */
-+    } kg_next_engine_params;
-+    ioc_fm_pcd_kg_scheme_counter_t      scheme_counter;  /**< A structure of parameters for updating
-+                                                              the scheme counter */
-+    void                                *id;             /**< Returns the scheme Id to be used */
-+} ioc_fm_pcd_kg_scheme_params_t;
-+
-+/**************************************************************************//**
-+ @Collection
-+*//***************************************************************************/
-+#if DPAA_VERSION >= 11
-+#define IOC_FM_PCD_CC_STATS_MAX_NUM_OF_FLR      10  /* Maximal supported number of frame length ranges */
-+#define IOC_FM_PCD_CC_STATS_FLR_SIZE            2   /* Size in bytes of a frame length range limit */
-+#endif /* DPAA_VERSION >= 11 */
-+#define IOC_FM_PCD_CC_STATS_FLR_COUNT_SIZE      4   /* Size in bytes of a frame length range counter */
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining CC as the next engine after a CC node.
-+                (Must match struct t_FmPcdCcNextCcParams defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_cc_next_cc_params_t {
-+    void        *cc_node_id;                             /**< Id of the next CC node */
-+} ioc_fm_pcd_cc_next_cc_params_t;
-+
-+#if DPAA_VERSION >= 11
-+/**************************************************************************//**
-+ @Description   A structure for defining Frame Replicator as the next engine after a CC node.
-+                (Must match struct t_FmPcdCcNextFrParams defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_cc_next_fr_params_t {
-+    void*       frm_replic_id;              /**< The id of the next frame replicator group */
-+} ioc_fm_pcd_cc_next_fr_params_t;
-+#endif /* DPAA_VERSION >= 11 */
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining PLCR params when PLCR is the
-+                next engine after a CC node
-+                (Must match struct t_FmPcdCcNextPlcrParams defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_cc_next_plcr_params_t {
-+    bool        override_params;            /**< TRUE if CC override previously decided parameters*/
-+    bool        shared_profile;             /**< Relevant only if overrideParams=TRUE:
-+                                                TRUE if this profile is shared between ports */
-+    uint16_t    new_relative_profile_id;    /**< Relevant only if overrideParams=TRUE:
-+                                                (otherwise profile id is taken from keygen);
-+                                                This parameter should indicate the policer
-+                                                profile offset within the port's
-+                                                policer profiles or from SHARED window.*/
-+    uint32_t    new_fqid;                   /**< Relevant only if overrideParams=TRUE:
-+                                                FQID for enquing the frame;
-+                                                In earlier chips  if policer next engine is KEYGEN,
-+                                                this parameter can be 0, because the KEYGEN always decides
-+                                                the enqueue FQID.*/
-+#if DPAA_VERSION >= 11
-+    uint8_t     new_relative_storage_profile_id;
-+                                            /**< Indicates the relative storage profile offset within
-+                                                 the port's storage profiles window;
-+                                                 Relevant only if the port was configured with VSP. */
-+#endif /* DPAA_VERSION >= 11 */
-+} ioc_fm_pcd_cc_next_plcr_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining enqueue params when BMI is the
-+                next engine after a CC node
-+                (Must match struct t_FmPcdCcNextEnqueueParams defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_cc_next_enqueue_params_t {
-+    ioc_fm_pcd_done_action  action;         /**< Action - when next engine is BMI (done) */
-+    bool                    override_fqid;  /**< TRUE if CC override previously decided fqid and vspid,
-+                                                 relevant if action = e_IOC_FM_PCD_ENQ_FRAME */
-+    uint32_t                new_fqid;       /**< Valid if overrideFqid=TRUE, FQID for enqueuing the frame
-+                                                 (otherwise FQID is taken from KeyGen),
-+                                                 relevant if action = e_IOC_FM_PCD_ENQ_FRAME*/
-+#if DPAA_VERSION >= 11
-+    uint8_t                 new_relative_storage_profile_id;
-+                                            /**< Valid if override_fqid=TRUE, Indicates the relative virtual
-+                                                 storage profile offset within the port's storage profiles
-+                                                 window; Relevant only if the port was configured with VSP. */
-+#endif /* DPAA_VERSION >= 11 */
-+
-+} ioc_fm_pcd_cc_next_enqueue_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining KG params when KG is the next engine after a CC node
-+                (Must match struct t_FmPcdCcNextKgParams defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_cc_next_kg_params_t {
-+    bool       override_fqid;               /**< TRUE if CC override previously decided fqid and vspid,
-+                                                 Note - this parameters are irrelevant for earlier chips */
-+    uint32_t   new_fqid;                    /**< Valid if overrideFqid=TRUE, FQID for enqueuing the frame
-+                                                 (otherwise FQID is taken from KeyGen),
-+                                                 Note - this parameters are irrelevant for earlier chips */
-+#if DPAA_VERSION >= 11
-+    uint8_t              new_relative_storage_profile_id;
-+                                            /**< Valid if override_fqid=TRUE, Indicates the relative virtual
-+                                                 storage profile offset within the port's storage profiles
-+                                                 window; Relevant only if the port was configured with VSP. */
-+#endif /* DPAA_VERSION >= 11 */
-+    void       *p_direct_scheme;            /**< Direct scheme id to go to. */
-+} ioc_fm_pcd_cc_next_kg_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining the next engine after a CC node.
-+                (Must match struct t_FmPcdCcNextEngineParams defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_cc_next_engine_params_t {
-+    ioc_fm_pcd_engine                           next_engine;    /**< User has to initialize parameters
-+                                                                     according to nextEngine definition */
-+    union {
-+            ioc_fm_pcd_cc_next_cc_params_t      cc_params;      /**< Parameters in case next engine is CC */
-+            ioc_fm_pcd_cc_next_plcr_params_t    plcr_params;    /**< Parameters in case next engine is PLCR */
-+            ioc_fm_pcd_cc_next_enqueue_params_t enqueue_params; /**< Parameters in case next engine is BMI */
-+            ioc_fm_pcd_cc_next_kg_params_t      kg_params;      /**< Parameters in case next engine is KG */
-+#if DPAA_VERSION >= 11
-+            ioc_fm_pcd_cc_next_fr_params_t      fr_params;      /**< Parameters in case next engine is FR */
-+#endif /* DPAA_VERSION >= 11 */
-+    } params;                                                   /**< Union used for all the next-engine parameters options */
-+    void                                        *manip_id;      /**< Handle to Manipulation object.
-+                                                                     Relevant if next engine is of type result
-+                                                                     (e_IOC_FM_PCD_PLCR, e_IOC_FM_PCD_KG, e_IOC_FM_PCD_DONE) */
-+    bool                                        statistics_en;  /**< If TRUE, statistics counters are incremented
-+                                                                      for each frame passing through this
-+                                                                      Coarse Classification entry. */
-+} ioc_fm_pcd_cc_next_engine_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a single CC key
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_cc_key_params_t {
-+    uint8_t                 *p_key;         /**< pointer to the key of the size defined in key_size */
-+    uint8_t                 *p_mask;        /**< pointer to the Mask per key of the size defined
-+                                                 in keySize. p_key and p_mask (if defined) has to be
-+                                                 of the same size defined in the key_size */
-+    ioc_fm_pcd_cc_next_engine_params_t  cc_next_engine_params;
-+                                            /**< parameters for the next for the defined Key in p_key */
-+
-+} ioc_fm_pcd_cc_key_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining CC keys parameters
-+                The driver supports two methods for CC node allocation: dynamic and static.
-+                Static mode was created in order to prevent runtime alloc/free
-+                of FMan memory (MURAM), which may cause fragmentation; in this mode,
-+                the driver automatically allocates the memory according to
-+                'max_num_of_keys' parameter. The driver calculates the maximal memory
-+                size that may be used for this CC-Node taking into consideration
-+                'mask_support' and 'statistics_mode' parameters.
-+                When 'action' = e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP in the extraction
-+                parameters of this node, 'max_num_of_keys' must be equal to 'num_of_keys'.
-+                In dynamic mode, 'max_num_of_keys' must be zero. At initialization,
-+                all required structures are allocated according to 'num_of_keys'
-+                parameter. During runtime modification, these structures are
-+                re-allocated according to the updated number of keys.
-+
-+                Please note that 'action' and 'ic_indx_mask' mentioned in the
-+                specific parameter explanations are passed in the extraction
-+                parameters of the node (fields of extractccparams.extractnonhdr).
-+*//***************************************************************************/
-+typedef struct ioc_keys_params_t {
-+    uint16_t                    max_num_of_keys;/**< Maximum number of keys that will (ever) be used in this CC-Node;
-+                                                     A value of zero may be used for dynamic memory allocation. */
-+    bool                        mask_support;   /**< This parameter is relevant only if a node is initialized with
-+                                                     action = e_IOC_FM_PCD_ACTION_EXACT_MATCH and max_num_of_keys > 0;
-+                                                     Should be TRUE to reserve table memory for key masks, even if
-+                                                     initial keys do not contain masks, or if the node was initialized
-+                                                     as 'empty' (without keys); this will allow user to add keys with
-+                                                     masks at runtime. */
-+    ioc_fm_pcd_cc_stats_mode    statistics_mode;/**< Determines the supported statistics mode for all node's keys.
-+                                                     To enable statistics gathering, statistics should be enabled per
-+                                                     every key, using 'statistics_en' in next engine parameters structure
-+                                                     of that key;
-+                                                     If 'max_num_of_keys' is set, all required structures will be
-+                                                     preallocated for all keys. */
-+#if (DPAA_VERSION >= 11)
-+    uint16_t                    frame_length_ranges[IOC_FM_PCD_CC_STATS_MAX_NUM_OF_FLR];
-+                                                /**< Relevant only for 'RMON' statistics mode
-+                                                     (this feature is supported only on B4860 device);
-+                                                     Holds a list of programmable thresholds. For each received frame,
-+                                                     its length in bytes is examined against these range thresholds and
-+                                                     the appropriate counter is incremented by 1. For example, to belong
-+                                                     to range i, the following should hold:
-+                                                     range i-1 threshold < frame length <= range i threshold
-+                                                     Each range threshold must be larger then its preceding range
-+                                                     threshold. Last range threshold must be 0xFFFF. */
-+#endif /* (DPAA_VERSION >= 11) */
-+    uint16_t                    num_of_keys;    /**< Number of initial keys;
-+                                                     Note that in case of 'action' = e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP,
-+                                                     this field should be power-of-2 of the number of bits that are
-+                                                     set in 'ic_indx_mask'. */
-+    uint8_t                     key_size;       /**< Size of key - for extraction of type FULL_FIELD, 'key_size' has
-+                                                     to be the standard size of the selected key; For other extraction
-+                                                     types, 'key_size' has to be as size of extraction; When 'action' =
-+                                                     e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP, 'keySize' must be 2. */
-+    ioc_fm_pcd_cc_key_params_t  key_params[IOC_FM_PCD_MAX_NUM_OF_KEYS];
-+                                                /**< An array with 'num_of_keys' entries, each entry specifies the
-+                                                     corresponding key parameters;
-+                                                     When 'action' = e_IOC_FM_PCD_ACTION_EXACT_MATCH, this value must not
-+                                                     exceed 255 (IOC_FM_PCD_MAX_NUM_OF_KEYS-1) as the last entry is saved
-+                                                     for the 'miss' entry. */
-+    ioc_fm_pcd_cc_next_engine_params_t  cc_next_engine_params_for_miss;
-+                                                /**< Parameters for defining the next engine when a key is not matched;
-+                                                     Not relevant if action = e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP. */
-+} ioc_keys_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a CC node
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_cc_node_params_t {
-+    ioc_fm_pcd_extract_entry_t          extract_cc_params;  /**< Extraction parameters */
-+    ioc_keys_params_t                   keys_params;        /**< Keys definition matching the selected extraction */
-+    void                                *id;                /**< Output parameter; returns the CC node Id to be used */
-+} ioc_fm_pcd_cc_node_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a hash table
-+                (Must match struct t_FmPcdHashTableParams defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_hash_table_params_t {
-+    uint16_t                    max_num_of_keys;            /**< Maximum Number Of Keys that will (ever) be used in this Hash-table */
-+    ioc_fm_pcd_cc_stats_mode    statistics_mode;            /**< If not e_IOC_FM_PCD_CC_STATS_MODE_NONE, the required structures for the
-+                                                                 requested statistics mode will be allocated according to max_num_of_keys. */
-+    uint8_t                     kg_hash_shift;              /**< KG-Hash-shift as it was configured in the KG-scheme
-+                                                                 that leads to this hash-table. */
-+    uint16_t                    hash_res_mask;              /**< Mask that will be used on the hash-result;
-+                                                                 The number-of-sets for this hash will be calculated
-+                                                                 as (2^(number of bits set in 'hash_res_mask'));
-+                                                                 The 4 lower bits must be cleared. */
-+    uint8_t                     hash_shift;                 /**< Byte offset from the beginning of the KeyGen hash result to the
-+                                                                 2-bytes to be used as hash index. */
-+    uint8_t                     match_key_size;             /**< Size of the exact match keys held by the hash buckets */
-+
-+    ioc_fm_pcd_cc_next_engine_params_t   cc_next_engine_params_for_miss;
-+                                                            /**< Parameters for defining the next engine when a key is not matched */
-+    void                        *id;
-+} ioc_fm_pcd_hash_table_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure with the arguments for the FM_PCD_HashTableAddKey ioctl() call
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_hash_table_add_key_params_t {
-+    void                        *p_hash_tbl;
-+    uint8_t                     key_size;
-+    ioc_fm_pcd_cc_key_params_t  key_params;
-+} ioc_fm_pcd_hash_table_add_key_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a CC tree group.
-+
-+                This structure defines a CC group in terms of NetEnv units
-+                and the action to be taken in each case. The unit_ids list must
-+                be given in order from low to high indices.
-+
-+                ioc_fm_pcd_cc_next_engine_params_t is a list of 2^num_of_distinction_units
-+                structures where each defines the next action to be taken for
-+                each units combination. for example:
-+                num_of_distinction_units = 2
-+                unit_ids = {1,3}
-+                next_engine_per_entries_in_grp[0] = ioc_fm_pcd_cc_next_engine_params_t for the case that
-+                                                    unit 1 - not found; unit 3 - not found;
-+                next_engine_per_entries_in_grp[1] = ioc_fm_pcd_cc_next_engine_params_t for the case that
-+                                                    unit 1 - not found; unit 3 - found;
-+                next_engine_per_entries_in_grp[2] = ioc_fm_pcd_cc_next_engine_params_t for the case that
-+                                                    unit 1 - found; unit 3 - not found;
-+                next_engine_per_entries_in_grp[3] = ioc_fm_pcd_cc_next_engine_params_t for the case that
-+                                                    unit 1 - found; unit 3 - found;
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_cc_grp_params_t {
-+    uint8_t                             num_of_distinction_units;   /**< Up to 4 */
-+    uint8_t                             unit_ids [IOC_FM_PCD_MAX_NUM_OF_CC_UNITS];
-+                                                                    /**< Indexes of the units as defined in
-+                                                                         FM_PCD_NetEnvCharacteristicsSet() */
-+    ioc_fm_pcd_cc_next_engine_params_t  next_engine_per_entries_in_grp[IOC_FM_PCD_MAX_NUM_OF_CC_ENTRIES_IN_GRP];
-+                                                                    /**< Maximum entries per group is 16 */
-+} ioc_fm_pcd_cc_grp_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining the CC tree groups
-+                (Must match struct t_FmPcdCcTreeParams defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_cc_tree_params_t {
-+        void                            *net_env_id;    /**< Id of the Network Environment as returned
-+                                                             by FM_PCD_NetEnvCharacteristicsSet() */
-+        uint8_t                         num_of_groups;  /**< Number of CC groups within the CC tree */
-+        ioc_fm_pcd_cc_grp_params_t      fm_pcd_cc_group_params [IOC_FM_PCD_MAX_NUM_OF_CC_GROUPS];
-+                                                        /**< Parameters for each group. */
-+        void                            *id;            /**< Output parameter; Returns the tree Id to be used */
-+} ioc_fm_pcd_cc_tree_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining policer byte rate
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_plcr_byte_rate_mode_param_t {
-+    ioc_fm_pcd_plcr_frame_length_select     frame_length_selection;     /**< Frame length selection */
-+    ioc_fm_pcd_plcr_roll_back_frame_select  roll_back_frame_selection;  /**< relevant option only e_IOC_FM_PCD_PLCR_L2_FRM_LEN,
-+                                                                             e_IOC_FM_PCD_PLCR_FULL_FRM_LEN */
-+} ioc_fm_pcd_plcr_byte_rate_mode_param_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining the policer profile (based on
-+                RFC-2698 or RFC-4115 attributes).
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_plcr_non_passthrough_alg_param_t {
-+    ioc_fm_pcd_plcr_rate_mode               rate_mode;                      /**< Byte / Packet */
-+    ioc_fm_pcd_plcr_byte_rate_mode_param_t  byte_mode_param;                /**< Valid for Byte NULL for Packet */
-+    uint32_t                                committed_info_rate;            /**< KBits/Sec or Packets/Sec */
-+    uint32_t                                committed_burst_size;           /**< KBits or Packets */
-+    uint32_t                                peak_or_excess_info_rate;       /**< KBits/Sec or Packets/Sec */
-+    uint32_t                                peak_or_excess_burst_size;      /**< KBits or Packets */
-+} ioc_fm_pcd_plcr_non_passthrough_alg_param_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining the next engine after policer
-+*//***************************************************************************/
-+typedef union ioc_fm_pcd_plcr_next_engine_params_u {
-+        ioc_fm_pcd_done_action     action;              /**< Action - when next engine is BMI (done) */
-+        void                       *p_profile;          /**< Policer profile handle -  used when next engine
-+                                                             is PLCR, must be a SHARED profile */
-+        void                       *p_direct_scheme;    /**< Direct scheme select - when next engine is Keygen */
-+} ioc_fm_pcd_plcr_next_engine_params_u;
-+
-+typedef struct ioc_fm_pcd_port_params_t {
-+    ioc_fm_port_type                    port_type;          /**< Type of port for this profile */
-+    uint8_t                             port_id;            /**< FM-Port id of port for this profile */
-+} ioc_fm_pcd_port_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining the policer profile entry
-+                (Must match struct t_FmPcdPlcrProfileParams defined in fm_pcd_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_plcr_profile_params_t {
-+    bool                                        modify;                     /**< TRUE to change an existing profile */
-+    union {
-+        struct {
-+            ioc_fm_pcd_profile_type_selection   profile_type;               /**< Type of policer profile */
-+            ioc_fm_pcd_port_params_t            *p_fm_port;                 /**< Relevant for per-port profiles only */
-+            uint16_t                            relative_profile_id;        /**< Profile id - relative to shared group or to port */
-+        } new_params;                                                       /**< Use it when modify = FALSE */
-+        void                                    *p_profile;                 /**< A handle to a profile - use it when modify=TRUE */
-+    } profile_select;
-+    ioc_fm_pcd_plcr_algorithm_selection         alg_selection;              /**< Profile Algorithm PASS_THROUGH, RFC_2698, RFC_4115 */
-+    ioc_fm_pcd_plcr_color_mode                  color_mode;                 /**< COLOR_BLIND, COLOR_AWARE */
-+
-+    union {
-+        ioc_fm_pcd_plcr_color                   dflt_color;                 /**< For Color-Blind Pass-Through mode; the policer will re-color
-+                                                                                 any incoming packet with the default value. */
-+        ioc_fm_pcd_plcr_color                   override;                   /**< For Color-Aware modes; the profile response to a
-+                                                                                 pre-color value of 2'b11. */
-+    } color;
-+
-+    ioc_fm_pcd_plcr_non_passthrough_alg_param_t non_passthrough_alg_param;  /**< RFC2698 or RFC4115 parameters */
-+
-+    ioc_fm_pcd_engine                           next_engine_on_green;       /**< Next engine for green-colored frames */
-+    ioc_fm_pcd_plcr_next_engine_params_u        params_on_green;            /**< Next engine parameters for green-colored frames  */
-+
-+    ioc_fm_pcd_engine                           next_engine_on_yellow;      /**< Next engine for yellow-colored frames */
-+    ioc_fm_pcd_plcr_next_engine_params_u        params_on_yellow;           /**< Next engine parameters for yellow-colored frames  */
-+
-+    ioc_fm_pcd_engine                           next_engine_on_red;         /**< Next engine for red-colored frames */
-+    ioc_fm_pcd_plcr_next_engine_params_u        params_on_red;              /**< Next engine parameters for red-colored frames  */
-+
-+    bool                                        trap_profile_on_flow_A;     /**< Obsolete - do not use */
-+    bool                                        trap_profile_on_flow_B;     /**< Obsolete - do not use */
-+    bool                                        trap_profile_on_flow_C;     /**< Obsolete - do not use */
-+
-+    void                                        *id;                        /**< output parameter; Returns the profile Id to be used */
-+} ioc_fm_pcd_plcr_profile_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for modifying CC tree next engine
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_cc_tree_modify_next_engine_params_t {
-+    void                                *id;                /**< CC tree Id to be used */
-+    uint8_t                             grp_indx;           /**< A Group index in the tree */
-+    uint8_t                             indx;               /**< Entry index in the group defined by grp_index */
-+    ioc_fm_pcd_cc_next_engine_params_t  cc_next_engine_params;
-+                                                            /**< Parameters for the next for the defined Key in the p_Key */
-+} ioc_fm_pcd_cc_tree_modify_next_engine_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for modifying CC node next engine
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_cc_node_modify_next_engine_params_t {
-+    void                                *id;                /**< CC node Id to be used */
-+    uint16_t                            key_indx;           /**< Key index for Next Engine Params modifications;
-+                                                                 NOTE: This parameter is IGNORED for miss-key!  */
-+    uint8_t                             key_size;           /**< Key size of added key */
-+    ioc_fm_pcd_cc_next_engine_params_t  cc_next_engine_params;
-+                                                            /**< parameters for the next for the defined Key in the p_Key */
-+} ioc_fm_pcd_cc_node_modify_next_engine_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for remove CC node key
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_cc_node_remove_key_params_t {
-+    void                                *id;                /**< CC node Id to be used */
-+    uint16_t                            key_indx;           /**< Key index for Next Engine Params modifications;
-+                                                                 NOTE: This parameter is IGNORED for miss-key!  */
-+} ioc_fm_pcd_cc_node_remove_key_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for modifying CC node key and next engine
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t {
-+    void                                *id;                /**< CC node Id to be used */
-+    uint16_t                            key_indx;           /**< Key index for Next Engine Params modifications;
-+                                                                 NOTE: This parameter is IGNORED for miss-key!  */
-+    uint8_t                             key_size;           /**< Key size of added key */
-+    ioc_fm_pcd_cc_key_params_t          key_params;         /**< it's array with numOfKeys entries each entry in
-+                                                                 the array of the type ioc_fm_pcd_cc_key_params_t */
-+} ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for modifying CC node key
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_cc_node_modify_key_params_t {
-+    void                                *id;                /**< CC node Id to be used */
-+    uint16_t                            key_indx;           /**< Key index for Next Engine Params modifications;
-+                                                                 NOTE: This parameter is IGNORED for miss-key!  */
-+    uint8_t                             key_size;           /**< Key size of added key */
-+    uint8_t                             *p_key;             /**< Pointer to the key of the size defined in key_size */
-+    uint8_t                             *p_mask;            /**< Pointer to the Mask per key of the size defined
-+                                                                 in keySize. p_Key and p_Mask (if defined) have to be
-+                                                                 of the same size as defined in the key_size */
-+} ioc_fm_pcd_cc_node_modify_key_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure with the arguments for the FM_PCD_HashTableRemoveKey ioctl() call
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_hash_table_remove_key_params_t {
-+    void       *p_hash_tbl;     /**< The id of the hash table */
-+    uint8_t     key_size;       /**< The size of the key to remove */
-+    uint8_t    *p_key;          /**< Pointer to the key to remove */
-+} ioc_fm_pcd_hash_table_remove_key_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for selecting a location for requested manipulation
-+*//***************************************************************************/
-+typedef struct ioc_fm_manip_hdr_info_t {
-+    ioc_net_header_type                 hdr;            /**< Header selection */
-+    ioc_fm_pcd_hdr_index                hdr_index;      /**< Relevant only for MPLS, VLAN and tunneled IP. Otherwise should be cleared. */
-+    bool                                by_field;       /**< TRUE if the location of manipulation is according to some field in the specific header*/
-+    ioc_fm_pcd_fields_u                 full_field;     /**< Relevant only when by_field = TRUE: Extract field */
-+} ioc_fm_manip_hdr_info_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header removal by header type
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_rmv_by_hdr_params_t {
-+    ioc_fm_pcd_manip_hdr_rmv_by_hdr_type        type;  /**< Selection of header removal location */
-+    union {
-+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
-+        struct {
-+            bool                                include;/**< If FALSE, remove until the specified header (not including the header);
-+                                                             If TRUE, remove also the specified header. */
-+            ioc_fm_manip_hdr_info_t             hdr_info;
-+        } from_start_by_hdr;                           /**< Relevant when type = e_IOC_FM_PCD_MANIP_RMV_BY_HDR_FROM_START */
-+#endif /* FM_CAPWAP_SUPPORT */
-+#if (DPAA_VERSION >= 11)
-+        ioc_fm_manip_hdr_info_t                hdr_info;        /**< Relevant when type = e_FM_PCD_MANIP_RMV_BY_HDR_FROM_START */
-+#endif /* (DPAA_VERSION >= 11) */
-+        ioc_fm_pcd_manip_hdr_rmv_specific_l2    specific_l2;/**< Relevant when type = e_IOC_FM_PCD_MANIP_BY_HDR_SPECIFIC_L2;
-+                                                                 Defines which L2 headers to remove. */
-+    } u;
-+} ioc_fm_pcd_manip_hdr_rmv_by_hdr_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for configuring IP fragmentation manipulation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_frag_ip_params_t {
-+    uint16_t                    size_for_fragmentation;     /**< If length of the frame is greater than this value,
-+                                                                 IP fragmentation will be executed.*/
-+#if DPAA_VERSION == 10
-+    uint8_t                     scratch_bpid;               /**< Absolute buffer pool id according to BM configuration.*/
-+#endif /* DPAA_VERSION == 10 */
-+    bool                        sg_bpid_en;                 /**< Enable a dedicated buffer pool id for the Scatter/Gather buffer allocation;
-+                                                                 If disabled, the Scatter/Gather buffer will be allocated from the same pool as the
-+                                                                 received frame's buffer. */
-+    uint8_t                     sg_bpid;                    /**< Scatter/Gather buffer pool id;
-+                                                                 This parameter is relevant when 'sg_bpid_en=TRUE';
-+                                                                 Same LIODN number is used for these buffers as for the received frames buffers, so buffers
-+                                                                 of this pool need to be allocated in the same memory area as the received buffers.
-+                                                                 If the received buffers arrive from different sources, the Scatter/Gather BP id should be
-+                                                                 mutual to all these sources. */
-+    ioc_fm_pcd_manip_dont_frag_action  dont_frag_action;    /**< Dont Fragment Action - If an IP packet is larger
-+                                                                 than MTU and its DF bit is set, then this field will
-+                                                                 determine the action to be taken.*/
-+} ioc_fm_pcd_manip_frag_ip_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for configuring IP reassembly manipulation.
-+
-+                This is a common structure for both IPv4 and IPv6 reassembly
-+                manipulation. For reassembly of both IPv4 and IPv6, make sure to
-+                set the 'hdr' field in ioc_fm_pcd_manip_reassem_params_t to IOC_HEADER_TYPE_IPv6.
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_reassem_ip_params_t {
-+    uint8_t                         relative_scheme_id[2];    /**< Partition relative scheme id:
-+                                                                 relativeSchemeId[0] -  Relative scheme ID for IPV4 Reassembly manipulation;
-+                                                                 relativeSchemeId[1] -  Relative scheme ID for IPV6 Reassembly manipulation;
-+                                                                 NOTE: The following comment is relevant only for FMAN v2 devices:
-+                                                                 Relative scheme ID for IPv4/IPv6 Reassembly manipulation must be smaller than
-+                                                                 the user schemes id to ensure that the reassembly's schemes will be first match.
-+                                                                 The remaining schemes, if defined, should have higher relative scheme ID. */
-+#if DPAA_VERSION >= 11
-+    uint32_t                        non_consistent_sp_fqid; /**< In case that other fragments of the frame corresponds to different storage
-+                                                                 profile than the opening fragment (Non-Consistent-SP state)
-+                                                                 then one of two possible scenarios occurs:
-+                                                                 if 'nonConsistentSpFqid != 0', the reassembled frame will be enqueued to
-+                                                                 this fqid, otherwise a 'Non Consistent SP' bit will be set in the FD[status].*/
-+#else
-+    uint8_t                         sg_bpid;                /**< Buffer pool id for the S/G frame created by the reassembly process */
-+#endif /* DPAA_VERSION >= 11 */
-+    uint8_t                         data_mem_id;            /**< Memory partition ID for the IPR's external tables structure */
-+    uint16_t                        data_liodn_offset;      /**< LIODN offset for access the IPR's external tables structure. */
-+    uint16_t                        min_frag_size[2];       /**< Minimum fragment size:
-+                                                                 minFragSize[0] - for ipv4, minFragSize[1] - for ipv6 */
-+    ioc_fm_pcd_manip_reassem_ways_number   num_of_frames_per_hash_entry[2];
-+                                                            /**< Number of frames per hash entry needed for reassembly process:
-+                                                                 numOfFramesPerHashEntry[0] - for ipv4 (max value is e_IOC_FM_PCD_MANIP_EIGHT_WAYS_HASH);
-+                                                                 numOfFramesPerHashEntry[1] - for ipv6 (max value is e_IOC_FM_PCD_MANIP_SIX_WAYS_HASH). */
-+    uint16_t                        max_num_frames_in_process;/**< Number of frames which can be processed by Reassembly in the same time;
-+                                                                 Must be power of 2;
-+                                                                 In the case numOfFramesPerHashEntry == e_IOC_FM_PCD_MANIP_FOUR_WAYS_HASH,
-+                                                                 maxNumFramesInProcess has to be in the range of 4 - 512;
-+                                                                 In the case numOfFramesPerHashEntry == e_IOC_FM_PCD_MANIP_EIGHT_WAYS_HASH,
-+                                                                 maxNumFramesInProcess has to be in the range of 8 - 2048. */
-+    ioc_fm_pcd_manip_reassem_time_out_mode  time_out_mode;  /**< Expiration delay initialized by Reassembly process */
-+    uint32_t                        fqid_for_time_out_frames;/**< FQID in which time out frames will enqueue during Time Out Process  */
-+    uint32_t                        timeout_threshold_for_reassm_process;
-+                                                            /**< Represents the time interval in microseconds which defines
-+                                                                 if opened frame (at least one fragment was processed but not all the fragments)is found as too old*/
-+} ioc_fm_pcd_manip_reassem_ip_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining IPSEC manipulation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_special_offload_ipsec_params_t {
-+    bool    decryption;                     /**< TRUE if being used in decryption direction;
-+                                                 FALSE if being used in encryption direction. */
-+    bool    ecn_copy;                       /**< TRUE to copy the ECN bits from inner/outer to outer/inner
-+                                                 (direction depends on the 'decryption' field). */
-+    bool    dscp_copy;                      /**< TRUE to copy the DSCP bits from inner/outer to outer/inner
-+                                                 (direction depends on the 'decryption' field). */
-+    bool    variable_ip_hdr_len;            /**< TRUE for supporting variable IP header length in decryption. */
-+    bool    variable_ip_version;            /**< TRUE for supporting both IP version on the same SA in encryption */
-+    uint8_t outer_ip_hdr_len;               /**< If 'variable_ip_version == TRUE' than this field must be set to non-zero value;
-+                                                 It is specifies the length of the outer IP header that was configured in the
-+                                                 corresponding SA. */
-+    uint16_t    arw_size;                   /**< if <> '0' then will perform ARW check for this SA;
-+                                                 The value must be a multiplication of 16 */
-+    void    *arw_addr;                      /**< if arwSize <> '0' then this field must be set to non-zero value;
-+                                                 MUST be allocated from FMAN's MURAM that the post-sec op-port belong
-+                                                 Must be 4B aligned. Required MURAM size is '(NEXT_POWER_OF_2(arwSize+32))/8+4' Bytes */
-+} ioc_fm_pcd_manip_special_offload_ipsec_params_t;
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Description   Parameters for configuring CAPWAP fragmentation manipulation
-+
-+ Restrictions:
-+     - Maximum number of fragments per frame is 16.
-+     - Transmit confirmation is not supported.
-+     - Fragmentation nodes must be set as the last PCD action (i.e. the
-+       corresponding CC node key must have next engine set to e_FM_PCD_DONE).
-+     - Only BMan buffers shall be used for frames to be fragmented.
-+     - NOTE: The following comment is relevant only for FMAN v3 devices: IPF
-+       does not support VSP. Therefore, on the same port where we have IPF we
-+       cannot support VSP.
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_frag_capwap_params_t {
-+    uint16_t                    size_for_fragmentation;   /**< If length of the frame is greater than this value,
-+                                                             CAPWAP fragmentation will be executed.*/
-+    bool                        sg_bpid_en;               /**< Enable a dedicated buffer pool id for the Scatter/Gather buffer allocation;
-+                                                             If disabled, the Scatter/Gather buffer will be allocated from the same pool as the
-+                                                             received frame's buffer. */
-+    uint8_t                     sg_bpid;                 /**< Scatter/Gather buffer pool id;
-+                                                             This parameters is relevant when 'sgBpidEn=TRUE';
-+                                                             Same LIODN number is used for these buffers as for the received frames buffers, so buffers
-+                                                             of this pool need to be allocated in the same memory area as the received buffers.
-+                                                             If the received buffers arrive from different sources, the Scatter/Gather BP id should be
-+                                                             mutual to all these sources. */
-+    bool                        compress_mode_en;         /**< CAPWAP Header Options Compress Enable mode;
-+                                                             When this mode is enabled then only the first fragment include the CAPWAP header options
-+                                                             field (if user provides it in the input frame) and all other fragments exclude the CAPWAP
-+                                                             options field (CAPWAP header is updated accordingly).*/
-+} ioc_fm_pcd_manip_frag_capwap_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for configuring CAPWAP reassembly manipulation.
-+
-+ Restrictions:
-+    - Application must define one scheme to catch the reassembled frames.
-+    - Maximum number of fragments per frame is 16.
-+
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_reassem_capwap_params_t {
-+    uint8_t                         relative_scheme_id;    /**< Partition relative scheme id;
-+                                                                 NOTE: this id must be smaller than the user schemes id to ensure that the reassembly scheme will be first match;
-+                                                                 Rest schemes, if defined, should have higher relative scheme ID. */
-+    uint8_t                         data_mem_id;              /**< Memory partition ID for the IPR's external tables structure */
-+    uint16_t                        data_liodn_offset;        /**< LIODN offset for access the IPR's external tables structure. */
-+    uint16_t                        max_reassembled_frame_length;/**< The maximum CAPWAP reassembled frame length in bytes;
-+                                                                   If maxReassembledFrameLength == 0, any successful reassembled frame length is
-+                                                                   considered as a valid length;
-+                                                                   if maxReassembledFrameLength > 0, a successful reassembled frame which its length
-+                                                                   exceeds this value is considered as an error frame (FD status[CRE] bit is set). */
-+    ioc_fm_pcd_manip_reassem_ways_number   num_of_frames_per_hash_entry;
-+                                                            /**< Number of frames per hash entry needed for reassembly process */
-+    uint16_t                        max_num_frames_in_process;  /**< Number of frames which can be processed by reassembly in the same time;
-+                                                                 Must be power of 2;
-+                                                                 In the case numOfFramesPerHashEntry == e_FM_PCD_MANIP_FOUR_WAYS_HASH,
-+                                                                 maxNumFramesInProcess has to be in the range of 4 - 512;
-+                                                                 In the case numOfFramesPerHashEntry == e_FM_PCD_MANIP_EIGHT_WAYS_HASH,
-+                                                                 maxNumFramesInProcess has to be in the range of 8 - 2048. */
-+    ioc_fm_pcd_manip_reassem_time_out_mode  time_out_mode;            /**< Expiration delay initialized by Reassembly process */
-+    uint32_t                        fqid_for_time_out_frames;   /**< FQID in which time out frames will enqueue during Time Out Process;
-+                                                                 Recommended value for this field is 0; in this way timed-out frames will be discarded */
-+    uint32_t                        timeout_threshold_for_reassm_process;
-+                                                            /**< Represents the time interval in microseconds which defines
-+                                                                 if opened frame (at least one fragment was processed but not all the fragments)is found as too old*/
-+} ioc_fm_pcd_manip_reassem_capwap_params_t;
-+
-+/**************************************************************************//**
-+ @Description   structure for defining CAPWAP manipulation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_special_offload_capwap_params_t {
-+    bool                    dtls;   /**< TRUE if continue to SEC DTLS encryption */
-+    ioc_fm_pcd_manip_hdr_qos_src   qos_src; /**< TODO */
-+} ioc_fm_pcd_manip_special_offload_capwap_params_t;
-+
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining special offload manipulation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_special_offload_params_t {
-+    ioc_fm_pcd_manip_special_offload_type               type;       /**< Type of special offload manipulation */
-+    union
-+    {
-+        ioc_fm_pcd_manip_special_offload_ipsec_params_t ipsec;      /**< Parameters for IPSec; Relevant when
-+                                                                         type = e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD_IPSEC */
-+
-+#if (DPAA_VERSION >= 11)
-+        ioc_fm_pcd_manip_special_offload_capwap_params_t  capwap;     /**< Parameters for CAPWAP; Relevant when
-+                                                                type = e_FM_PCD_MANIP_SPECIAL_OFFLOAD_CAPWAP */
-+#endif /* (DPAA_VERSION >= 11) */
-+    } u;
-+} ioc_fm_pcd_manip_special_offload_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining generic removal manipulation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_rmv_generic_params_t {
-+    uint8_t                         offset;         /**< Offset from beginning of header to the start
-+                                                         location of the removal */
-+    uint8_t                         size;           /**< Size of removed section */
-+} ioc_fm_pcd_manip_hdr_rmv_generic_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining insertion manipulation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_insrt_t {
-+    uint8_t size;           /**< size of inserted section */
-+    uint8_t *p_data;        /**< data to be inserted */
-+} ioc_fm_pcd_manip_hdr_insrt_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining generic insertion manipulation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_insrt_generic_params_t {
-+    uint8_t                         offset;         /**< Offset from beginning of header to the start
-+                                                         location of the insertion */
-+    uint8_t                         size;           /**< Size of inserted section */
-+    bool                            replace;        /**< TRUE to override (replace) existing data at
-+                                                         'offset', FALSE to insert */
-+    uint8_t                         *p_data;        /**< Pointer to data to be inserted */
-+} ioc_fm_pcd_manip_hdr_insrt_generic_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header manipulation VLAN DSCP To Vpri translation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_field_update_vlan_dscp_to_vpri_t {
-+    uint8_t                         dscp_to_vpri_table[IOC_FM_PCD_MANIP_DSCP_TO_VLAN_TRANS];
-+                                                    /**< A table of VPri values for each DSCP value;
-+                                                         The index is the D_SCP value (0-0x3F) and the
-+                                                         value is the corresponding VPRI (0-15). */
-+    uint8_t                         vpri_def_val;   /**< 0-7, Relevant only if if update_type =
-+                                                         e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN,
-+                                                         this field is the Q Tag default value if the
-+                                                         IP header is not found. */
-+} ioc_fm_pcd_manip_hdr_field_update_vlan_dscp_to_vpri_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header manipulation VLAN fields updates
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_field_update_vlan_t {
-+    ioc_fm_pcd_manip_hdr_field_update_vlan  update_type;    /**< Selects VLAN update type */
-+    union {
-+        uint8_t                                     vpri;   /**< 0-7, Relevant only if If update_type =
-+                                                                 e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN_PRI, this
-+                                                                 is the new VLAN pri. */
-+        ioc_fm_pcd_manip_hdr_field_update_vlan_dscp_to_vpri_t    dscp_to_vpri;
-+                                                            /**<  Parameters structure, Relevant only if update_type =
-+                                                                  e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN. */
-+    } u;
-+} ioc_fm_pcd_manip_hdr_field_update_vlan_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header manipulation IPV4 fields updates
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_field_update_ipv4_t {
-+    ioc_ipv4_hdr_manip_update_flags_t       valid_updates;  /**< ORed flag, selecting the required updates */
-+    uint8_t                                 tos;            /**< 8 bit New TOS; Relevant if valid_updates contains
-+                                                                 IOC_HDR_MANIP_IPV4_TOS */
-+    uint16_t                                id;             /**< 16 bit New IP ID; Relevant only if valid_updates
-+                                                                 contains IOC_HDR_MANIP_IPV4_ID */
-+    uint32_t                                src;            /**< 32 bit New IP SRC; Relevant only if valid_updates
-+                                                                 contains IOC_HDR_MANIP_IPV4_SRC */
-+    uint32_t                                dst;            /**< 32 bit New IP DST; Relevant only if valid_updates
-+                                                                 contains IOC_HDR_MANIP_IPV4_DST */
-+} ioc_fm_pcd_manip_hdr_field_update_ipv4_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header manipulation IPV6 fields updates
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_field_update_ipv6_t {
-+    ioc_ipv6_hdr_manip_update_flags_t       valid_updates;  /**< ORed flag, selecting the required updates */
-+    uint8_t                                 traffic_class;  /**< 8 bit New Traffic Class; Relevant if valid_updates contains
-+                                                                 IOC_HDR_MANIP_IPV6_TC */
-+    uint8_t                                 src[IOC_NET_HEADER_FIELD_IPv6_ADDR_SIZE];
-+                                                            /**< 16 byte new IP SRC; Relevant only if valid_updates
-+                                                                 contains IOC_HDR_MANIP_IPV6_SRC */
-+    uint8_t                                 dst[IOC_NET_HEADER_FIELD_IPv6_ADDR_SIZE];
-+                                                            /**< 16 byte new IP DST; Relevant only if valid_updates
-+                                                                 contains IOC_HDR_MANIP_IPV6_DST */
-+} ioc_fm_pcd_manip_hdr_field_update_ipv6_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header manipulation TCP/UDP fields updates
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t {
-+    ioc_tcp_udp_hdr_manip_update_flags_t    valid_updates;  /**< ORed flag, selecting the required updates */
-+    uint16_t                                src;            /**< 16 bit New TCP/UDP SRC; Relevant only if valid_updates
-+                                                                 contains IOC_HDR_MANIP_TCP_UDP_SRC */
-+    uint16_t                                dst;            /**< 16 bit New TCP/UDP DST; Relevant only if valid_updates
-+                                                                 contains IOC_HDR_MANIP_TCP_UDP_DST */
-+} ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header manipulation fields updates
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_field_update_params_t {
-+    ioc_fm_pcd_manip_hdr_field_update_type          type;   /**< Type of header field update manipulation */
-+    union {
-+        ioc_fm_pcd_manip_hdr_field_update_vlan_t    vlan;   /**< Parameters for VLAN update. Relevant when
-+                                                                 type = e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN */
-+        ioc_fm_pcd_manip_hdr_field_update_ipv4_t    ipv4;   /**< Parameters for IPv4 update. Relevant when
-+                                                                 type = e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV4 */
-+        ioc_fm_pcd_manip_hdr_field_update_ipv6_t    ipv6;   /**< Parameters for IPv6 update. Relevant when
-+                                                                 type = e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV6 */
-+        ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t tcp_udp;/**< Parameters for TCP/UDP update. Relevant when
-+                                                                 type = e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_TCP_UDP */
-+    } u;
-+} ioc_fm_pcd_manip_hdr_field_update_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining custom header manipulation for IP replacement
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_custom_ip_hdr_replace_t {
-+    ioc_fm_pcd_manip_hdr_custom_ip_replace  replace_type;   /**< Selects replace update type */
-+    bool                                    dec_ttl_hl;     /**< Decrement TTL (IPV4) or Hop limit (IPV6) by 1 */
-+    bool                                    update_ipv4_id; /**< Relevant when replace_type =
-+                                                                 e_IOC_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV6_BY_IPV4 */
-+    uint16_t                                id;             /**< 16 bit New IP ID; Relevant only if
-+                                                                 update_ipv4_id = TRUE */
-+    uint8_t                                 hdr_size;       /**< The size of the new IP header */
-+    uint8_t                                 hdr[IOC_FM_PCD_MANIP_MAX_HDR_SIZE];
-+                                                            /**< The new IP header */
-+} ioc_fm_pcd_manip_hdr_custom_ip_hdr_replace_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining custom header manipulation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_custom_params_t {
-+    ioc_fm_pcd_manip_hdr_custom_type                type;   /**< Type of header field update manipulation */
-+    union {
-+        ioc_fm_pcd_manip_hdr_custom_ip_hdr_replace_t    ip_hdr_replace;
-+                                                            /**< Parameters IP header replacement */
-+    } u;
-+} ioc_fm_pcd_manip_hdr_custom_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining specific L2 insertion manipulation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_insrt_specific_l2_params_t {
-+    ioc_fm_pcd_manip_hdr_insrt_specific_l2  specific_l2;    /**< Selects which L2 headers to insert */
-+    bool                                    update;         /**< TRUE to update MPLS header */
-+    uint8_t                                 size;           /**< size of inserted section */
-+    uint8_t                                *p_data;         /**< data to be inserted */
-+} ioc_fm_pcd_manip_hdr_insrt_specific_l2_params_t;
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Description   Parameters for defining IP insertion manipulation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_insrt_ip_params_t {
-+    bool    calc_l4_checksum; /**< Calculate L4 checksum. */
-+    ioc_fm_pcd_manip_hdr_qos_mapping_mode   mapping_mode; /**< TODO */
-+    uint8_t last_pid_offset;     /**< the offset of the last Protocol within
-+                                 the inserted header */
-+    uint16_t  id;           /**< 16 bit New IP ID */
-+    bool                            dont_frag_overwrite;
-+    /**< IPv4 only. DF is overwritten with the hash-result next-to-last byte.
-+     * This byte is configured to be overwritten when RPD is set. */
-+    uint8_t                         last_dst_offset;
-+    /**< IPv6 only. if routing extension exist, user should set the offset of the destination address
-+     * in order to calculate UDP checksum pseudo header;
-+     * Otherwise set it to '0'. */
-+    ioc_fm_pcd_manip_hdr_insrt_t insrt; /**< size and data to be inserted. */
-+} ioc_fm_pcd_manip_hdr_insrt_ip_params_t;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header insertion manipulation by header type
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_insrt_by_hdr_params_t {
-+    ioc_fm_pcd_manip_hdr_insrt_by_hdr_type          type;   /**< Selects manipulation type */
-+    union {
-+       ioc_fm_pcd_manip_hdr_insrt_specific_l2_params_t  specific_l2_params;
-+                                                            /**< Used when type = e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_SPECIFIC_L2:
-+                                                                 Selects which L2 headers to remove */
-+#if (DPAA_VERSION >= 11)
-+        ioc_fm_pcd_manip_hdr_insrt_ip_params_t      ip_params;  /**< Used when type = e_FM_PCD_MANIP_INSRT_BY_HDR_IP */
-+        ioc_fm_pcd_manip_hdr_insrt_t                insrt;     /**< Used when type is one of e_FM_PCD_MANIP_INSRT_BY_HDR_UDP,
-+                                                                e_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE, or
-+                                                                e_FM_PCD_MANIP_INSRT_BY_HDR_CAPWAP */
-+#endif /* (DPAA_VERSION >= 11) */
-+    } u;
-+} ioc_fm_pcd_manip_hdr_insrt_by_hdr_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header insertion manipulation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_insrt_params_t {
-+    ioc_fm_pcd_manip_hdr_insrt_type                     type;   /**< Type of insertion manipulation */
-+    union {
-+        ioc_fm_pcd_manip_hdr_insrt_by_hdr_params_t      by_hdr; /**< Parameters for defining header insertion manipulation by header type,
-+                                                                     relevant if 'type' = e_IOC_FM_PCD_MANIP_INSRT_BY_HDR */
-+        ioc_fm_pcd_manip_hdr_insrt_generic_params_t     generic;/**< Parameters for defining generic header insertion manipulation,
-+                                                                     relevant if type = e_IOC_FM_PCD_MANIP_INSRT_GENERIC */
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+        ioc_fm_pcd_manip_hdr_insrt_by_template_params_t by_template;
-+                                                                /**< Parameters for defining header insertion manipulation by template,
-+                                                                     relevant if 'type' = e_IOC_FM_PCD_MANIP_INSRT_BY_TEMPLATE */
-+#endif /* FM_CAPWAP_SUPPORT */
-+    } u;
-+} ioc_fm_pcd_manip_hdr_insrt_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header removal manipulation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_rmv_params_t {
-+    ioc_fm_pcd_manip_hdr_rmv_type                  type;       /**< Type of header removal manipulation */
-+    union {
-+        ioc_fm_pcd_manip_hdr_rmv_by_hdr_params_t   by_hdr;     /**< Parameters for defining header removal manipulation by header type,
-+                                                                    relevant if type = e_IOC_FM_PCD_MANIP_RMV_BY_HDR */
-+        ioc_fm_pcd_manip_hdr_rmv_generic_params_t  generic;    /**< Parameters for defining generic header removal manipulation,
-+                                                                    relevant if type = e_IOC_FM_PCD_MANIP_RMV_GENERIC */
-+    } u;
-+} ioc_fm_pcd_manip_hdr_rmv_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining header manipulation node
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_hdr_params_t {
-+    bool                                        rmv;                  /**< TRUE, to define removal manipulation */
-+    ioc_fm_pcd_manip_hdr_rmv_params_t           rmv_params;           /**< Parameters for removal manipulation, relevant if 'rmv' = TRUE */
-+
-+    bool                                        insrt;                /**< TRUE, to define insertion manipulation */
-+    ioc_fm_pcd_manip_hdr_insrt_params_t         insrt_params;         /**< Parameters for insertion manipulation, relevant if 'insrt' = TRUE */
-+
-+    bool                                        field_update;         /**< TRUE, to define field update manipulation */
-+    ioc_fm_pcd_manip_hdr_field_update_params_t  field_update_params;  /**< Parameters for field update manipulation, relevant if 'fieldUpdate' = TRUE */
-+
-+    bool                                        custom;               /**< TRUE, to define custom manipulation */
-+    ioc_fm_pcd_manip_hdr_custom_params_t        custom_params;        /**< Parameters for custom manipulation, relevant if 'custom' = TRUE */
-+
-+    bool                                        dont_parse_after_manip;/**< FALSE to activate the parser a second time after
-+                                                                            completing the manipulation on the frame */
-+} ioc_fm_pcd_manip_hdr_params_t;
-+
-+
-+/**************************************************************************//**
-+ @Description   structure for defining fragmentation manipulation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_frag_params_t {
-+    ioc_net_header_type                     hdr;            /**< Header selection */
-+    union {
-+#if (DPAA_VERSION >= 11)
-+        ioc_fm_pcd_manip_frag_capwap_params_t    capwap_frag;   /**< Parameters for defining CAPWAP fragmentation,
-+                                                           relevant if 'hdr' = HEADER_TYPE_CAPWAP */
-+#endif /* (DPAA_VERSION >= 11) */
-+        ioc_fm_pcd_manip_frag_ip_params_t   ip_frag;        /**< Parameters for defining IP fragmentation,
-+                                                                 relevant if 'hdr' = HEADER_TYPE_Ipv4 or HEADER_TYPE_Ipv6 */
-+    } u;
-+} ioc_fm_pcd_manip_frag_params_t;
-+
-+/**************************************************************************//**
-+ @Description   structure for defining reassemble manipulation
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_reassem_params_t {
-+    ioc_net_header_type                         hdr;        /**< Header selection */
-+    union {
-+#if (DPAA_VERSION >= 11)
-+        ioc_fm_pcd_manip_reassem_capwap_params_t capwap_reassem;  /**< Parameters for defining CAPWAP reassembly,
-+                                                           relevant if 'hdr' = HEADER_TYPE_CAPWAP */
-+#endif /* (DPAA_VERSION >= 11) */
-+        ioc_fm_pcd_manip_reassem_ip_params_t    ip_reassem; /**< Parameters for defining IP reassembly,
-+                                                                 relevant if 'hdr' = HEADER_TYPE_Ipv4 or HEADER_TYPE_Ipv6 */
-+    } u;
-+} ioc_fm_pcd_manip_reassem_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for defining a manipulation node
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_params_t {
-+    ioc_fm_pcd_manip_type                           type;   /**< Selects type of manipulation node */
-+    union {
-+        ioc_fm_pcd_manip_hdr_params_t               hdr;    /**< Parameters for defining header manipulation node */
-+        ioc_fm_pcd_manip_reassem_params_t           reassem;/**< Parameters for defining reassembly manipulation node */
-+        ioc_fm_pcd_manip_frag_params_t              frag;   /**< Parameters for defining fragmentation manipulation node */
-+        ioc_fm_pcd_manip_special_offload_params_t   special_offload;/**< Parameters for defining special offload manipulation node */
-+    } u;
-+    void                                            *p_next_manip;/**< Handle to another (previously defined) manipulation node;
-+                                                                 Allows concatenation of manipulation actions
-+                                                                 This parameter is optional and may be NULL. */
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+    bool                                            frag_or_reasm;/**< TRUE, if defined fragmentation/reassembly manipulation */
-+    ioc_fm_pcd_manip_frag_or_reasm_params_t         frag_or_reasm_params;/**< Parameters for fragmentation/reassembly manipulation,
-+                                                                            relevant if frag_or_reasm = TRUE */
-+#endif /* FM_CAPWAP_SUPPORT */
-+    void                                           *id;
-+} ioc_fm_pcd_manip_params_t;
-+
-+/**************************************************************************//**
-+ @Description   Structure for retrieving IP reassembly statistics
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_reassem_ip_stats_t {
-+    /* common counters for both IPv4 and IPv6 */
-+    uint32_t    timeout;                        /**< Counts the number of TimeOut occurrences */
-+    uint32_t    rfd_pool_busy;                    /**< Counts the number of failed attempts to allocate
-+                                                     a Reassembly Frame Descriptor */
-+    uint32_t    internal_buffer_busy;             /**< Counts the number of times an internal buffer busy occurred */
-+    uint32_t    external_buffer_busy;             /**< Counts the number of times external buffer busy occurred */
-+    uint32_t    sg_fragments;                    /**< Counts the number of Scatter/Gather fragments */
-+    uint32_t    dma_semaphore_depletion;          /**< Counts the number of failed attempts to allocate a DMA semaphore */
-+#if (DPAA_VERSION >= 11)
-+    uint32_t        non_consistent_sp;            /**< Counts the number of Non Consistent Storage Profile events for
-+                                                     successfully reassembled frames */
-+#endif /* (DPAA_VERSION >= 11) */
-+struct {
-+        uint32_t    successfully_reassembled;    /**< Counts the number of successfully reassembled frames */
-+        uint32_t    valid_fragments;             /**< Counts the total number of valid fragments that
-+                                                     have been processed for all frames */
-+        uint32_t    processed_fragments;         /**< Counts the number of processed fragments
-+                                                     (valid and error fragments) for all frames */
-+        uint32_t    malformed_fragments;         /**< Counts the number of malformed fragments processed for all frames */
-+        uint32_t    discarded_fragments;         /**< Counts the number of fragments discarded by the reassembly process */
-+        uint32_t    auto_learn_busy;              /**< Counts the number of times a busy condition occurs when attempting
-+                                                     to access an IP-Reassembly Automatic Learning Hash set */
-+        uint32_t    more_than16fragments;        /**< Counts the fragment occurrences in which the number of fragments-per-frame
-+                                                     exceeds 16 */
-+    } specific_hdr_statistics[2];                 /**< slot '0' is for IPv4, slot '1' is for IPv6 */
-+} ioc_fm_pcd_manip_reassem_ip_stats_t;
-+
-+/**************************************************************************//**
-+ @Description   Structure for retrieving IP fragmentation statistics
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_frag_ip_stats_t {
-+    uint32_t    total_frames;            /**< Number of frames that passed through the manipulation node */
-+    uint32_t    fragmented_frames;       /**< Number of frames that were fragmented */
-+    uint32_t    generated_fragments;     /**< Number of fragments that were generated */
-+} ioc_fm_pcd_manip_frag_ip_stats_t;
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Description   Structure for retrieving CAPWAP reassembly statistics
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_reassem_capwap_stats_t {
-+    uint32_t    timeout;                    /**< Counts the number of timeout occurrences */
-+    uint32_t    rfd_pool_busy;                /**< Counts the number of failed attempts to allocate
-+                                                 a Reassembly Frame Descriptor */
-+    uint32_t    internal_buffer_busy;         /**< Counts the number of times an internal buffer busy occurred */
-+    uint32_t    external_buffer_busy;         /**< Counts the number of times external buffer busy occurred */
-+    uint32_t    sg_fragments;                /**< Counts the number of Scatter/Gather fragments */
-+    uint32_t    dma_semaphore_depletion;      /**< Counts the number of failed attempts to allocate a DMA semaphore */
-+    uint32_t    successfully_reassembled;    /**< Counts the number of successfully reassembled frames */
-+    uint32_t    valid_fragments;             /**< Counts the total number of valid fragments that
-+                                                 have been processed for all frames */
-+    uint32_t    processed_fragments;         /**< Counts the number of processed fragments
-+                                                 (valid and error fragments) for all frames */
-+    uint32_t    malformed_fragments;         /**< Counts the number of malformed fragments processed for all frames */
-+    uint32_t    autoLearn_busy;              /**< Counts the number of times a busy condition occurs when attempting
-+                                                 to access an Reassembly Automatic Learning Hash set */
-+    uint32_t    discarded_fragments;         /**< Counts the number of fragments discarded by the reassembly process */
-+    uint32_t    more_than16fragments;        /**< Counts the fragment occurrences in which the number of fragments-per-frame
-+                                                 exceeds 16 */
-+    uint32_t    exceed_max_reassembly_frame_len;/**< ounts the number of times that a successful reassembled frame
-+                                                 length exceeds MaxReassembledFrameLength value */
-+} ioc_fm_pcd_manip_reassem_capwap_stats_t;
-+
-+/**************************************************************************//**
-+ @Description   Structure for retrieving CAPWAP fragmentation statistics
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_frag_capwap_stats_t {
-+    uint32_t    total_frames;            /**< Number of frames that passed through the manipulation node */
-+    uint32_t    fragmented_frames;       /**< Number of frames that were fragmented */
-+    uint32_t    generated_fragments;     /**< Number of fragments that were generated */
-+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
-+    uint8_t     sg_allocation_failure;    /**< Number of allocation failure of s/g buffers */
-+#endif /* (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)) */
-+} ioc_fm_pcd_manip_frag_capwap_stats_t;
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/**************************************************************************//**
-+ @Description   Structure for retrieving reassembly statistics
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_reassem_stats_t {
-+    union {
-+        ioc_fm_pcd_manip_reassem_ip_stats_t  ip_reassem;  /**< Structure for IP reassembly statistics */
-+#if (DPAA_VERSION >= 11)
-+        ioc_fm_pcd_manip_reassem_capwap_stats_t  capwap_reassem;  /**< Structure for CAPWAP reassembly statistics */
-+#endif /* (DPAA_VERSION >= 11) */
-+    } u;
-+} ioc_fm_pcd_manip_reassem_stats_t;
-+
-+/**************************************************************************//**
-+ @Description   structure for retrieving fragmentation statistics
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_frag_stats_t {
-+    union {
-+        ioc_fm_pcd_manip_frag_ip_stats_t     ip_frag;     /**< Structure for IP fragmentation statistics */
-+#if (DPAA_VERSION >= 11)
-+        ioc_fm_pcd_manip_frag_capwap_stats_t capwap_frag; /**< Structure for CAPWAP fragmentation statistics */
-+#endif /* (DPAA_VERSION >= 11) */
-+    } u;
-+} ioc_fm_pcd_manip_frag_stats_t;
-+
-+/**************************************************************************//**
-+ @Description   structure for defining manipulation statistics
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_stats_t {
-+    union {
-+        ioc_fm_pcd_manip_reassem_stats_t  reassem;    /**< Structure for reassembly statistics */
-+        ioc_fm_pcd_manip_frag_stats_t     frag;       /**< Structure for fragmentation statistics */
-+    } u;
-+} ioc_fm_pcd_manip_stats_t;
-+
-+/**************************************************************************//**
-+ @Description   Parameters for acquiring manipulation statistics
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_manip_get_stats_t {
-+	void				*id;
-+	ioc_fm_pcd_manip_stats_t	stats;
-+} ioc_fm_pcd_manip_get_stats_t;
-+
-+#if DPAA_VERSION >= 11
-+/**************************************************************************//**
-+ @Description   Parameters for defining frame replicator group and its members
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_frm_replic_group_params_t {
-+    uint8_t                     max_num_of_entries;    /**< Maximal number of members in the group  - must be at least two */
-+    uint8_t                     num_of_entries;       /**< Number of members in the group - must be at least 1 */
-+    ioc_fm_pcd_cc_next_engine_params_t   next_engine_params[IOC_FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES];
-+                                                    /**< Array of members' parameters */
-+    void                        *id;
-+} ioc_fm_pcd_frm_replic_group_params_t;
-+
-+typedef struct ioc_fm_pcd_frm_replic_member_t {
-+    void *h_replic_group;
-+    uint16_t member_index;
-+} ioc_fm_pcd_frm_replic_member_t;
-+
-+typedef struct ioc_fm_pcd_frm_replic_member_params_t {
-+    ioc_fm_pcd_frm_replic_member_t member;
-+    ioc_fm_pcd_cc_next_engine_params_t next_engine_params;
-+} ioc_fm_pcd_frm_replic_member_params_t;
-+#endif /* DPAA_VERSION >= 11 */
-+
-+
-+typedef struct ioc_fm_pcd_cc_key_statistics_t {
-+    uint32_t    byte_count;      /**< This counter reflects byte count of frames that
-+                                     were matched by this key. */
-+    uint32_t    frame_count;     /**< This counter reflects count of frames that
-+                                     were matched by this key. */
-+#if (DPAA_VERSION >= 11)
-+    uint32_t    frame_length_range_count[IOC_FM_PCD_CC_STATS_MAX_NUM_OF_FLR];
-+                                /**< These counters reflect how many frames matched
-+                                     this key in 'RMON' statistics mode:
-+                                     Each counter holds the number of frames of a
-+                                     specific frames length range, according to the
-+                                     ranges provided at initialization. */
-+#endif /* (DPAA_VERSION >= 11) */
-+} ioc_fm_pcd_cc_key_statistics_t;
-+
-+
-+typedef struct ioc_fm_pcd_cc_tbl_get_stats_t {
-+    void                            *id;
-+    uint16_t                        key_index;
-+    ioc_fm_pcd_cc_key_statistics_t  statistics;
-+} ioc_fm_pcd_cc_tbl_get_stats_t;
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableGetKeyStatistics
-+
-+ @Description   This routine may be used to get statistics counters of specific key
-+                in a CC Node.
-+
-+                If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
-+                'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
-+                these counters reflect how many frames passed that were matched
-+                this key; The total frames count will be returned in the counter
-+                of the first range (as only one frame length range was defined).
-+                If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for this node, the total
-+                frame count will be separated to frame length counters, based on
-+                provided frame length ranges.
-+
-+ @Param[in]     h_CcNode        A handle to the node
-+ @Param[in]     keyIndex        Key index for adding
-+ @Param[out]    p_KeyStatistics Key statistics counters
-+
-+ @Return        The specific key statistics.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet().
-+*//***************************************************************************/
-+
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_MATCH_TABLE_GET_KEY_STAT_COMPAT   _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(12), ioc_compat_fm_pcd_cc_tbl_get_stats_t)
-+#endif
-+#define FM_PCD_IOC_MATCH_TABLE_GET_KEY_STAT  _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(12), ioc_fm_pcd_cc_tbl_get_stats_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableGetMissStatistics
-+
-+ @Description   This routine may be used to get statistics counters of miss entry
-+                in a CC Node.
-+
-+                If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
-+                'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
-+                these counters reflect how many frames were not matched to any
-+                existing key and therefore passed through the miss entry; The
-+                total frames count will be returned in the counter of the
-+                first range (as only one frame length range was defined).
-+
-+ @Param[in]     h_CcNode            A handle to the node
-+ @Param[out]    p_MissStatistics    Statistics counters for 'miss'
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet().
-+*//***************************************************************************/
-+
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_MATCH_TABLE_GET_MISS_STAT_COMPAT   _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(13), ioc_compat_fm_pcd_cc_tbl_get_stats_t)
-+#endif
-+#define FM_PCD_IOC_MATCH_TABLE_GET_MISS_STAT  _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(13), ioc_fm_pcd_cc_tbl_get_stats_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_HashTableGetMissStatistics
-+
-+ @Description   This routine may be used to get statistics counters of 'miss'
-+                entry of the a hash table.
-+
-+                If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
-+                'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node,
-+                these counters reflect how many frames were not matched to any
-+                existing key and therefore passed through the miss entry;
-+
-+ @Param[in]     h_HashTbl           A handle to a hash table
-+ @Param[out]    p_MissStatistics    Statistics counters for 'miss'
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_HashTableSet().
-+*//***************************************************************************/
-+
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_HASH_TABLE_GET_MISS_STAT_COMPAT   _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(14), ioc_compat_fm_pcd_cc_tbl_get_stats_t)
-+#endif
-+#define FM_PCD_IOC_HASH_TABLE_GET_MISS_STAT  _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(14), ioc_fm_pcd_cc_tbl_get_stats_t)
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_NetEnvCharacteristicsSet
-+
-+ @Description   Define a set of Network Environment Characteristics.
-+
-+                When setting an environment it is important to understand its
-+                application. It is not meant to describe the flows that will run
-+                on the ports using this environment, but what the user means TO DO
-+                with the PCD mechanisms in order to parse-classify-distribute those
-+                frames.
-+                By specifying a distinction unit, the user means it would use that option
-+                for distinction between frames at either a KeyGen scheme or a coarse
-+                classification action descriptor. Using interchangeable headers to define a
-+                unit means that the user is indifferent to which of the interchangeable
-+                headers is present in the frame, and wants the distinction to be based
-+                on the presence of either one of them.
-+
-+                Depending on context, there are limitations to the use of environments. A
-+                port using the PCD functionality is bound to an environment. Some or even
-+                all ports may share an environment but also an environment per port is
-+                possible. When initializing a scheme, a classification plan group (see below),
-+                or a coarse classification tree, one of the initialized environments must be
-+                stated and related to. When a port is bound to a scheme, a classification
-+                plan group, or a coarse classification tree, it MUST be bound to the same
-+                environment.
-+
-+                The different PCD modules, may relate (for flows definition) ONLY on
-+                distinction units as defined by their environment. When initializing a
-+                scheme for example, it may not choose to select IPV4 as a match for
-+                recognizing flows unless it was defined in the relating environment. In
-+                fact, to guide the user through the configuration of the PCD, each module's
-+                characterization in terms of flows is not done using protocol names, but using
-+                environment indexes.
-+
-+                In terms of HW implementation, the list of distinction units sets the LCV vectors
-+                and later used for match vector, classification plan vectors and coarse classification
-+                indexing.
-+
-+ @Param[in,out] ioc_fm_pcd_net_env_params_t   A structure defining the distiction units for this configuration.
-+
-+ @Return        0 on success; Error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET_COMPAT   _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(20), ioc_compat_fm_pcd_net_env_params_t)
-+#endif
-+#define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET  _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(20), ioc_fm_pcd_net_env_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_NetEnvCharacteristicsDelete
-+
-+ @Description   Deletes a set of Network Environment Charecteristics.
-+
-+ @Param[in]     ioc_fm_obj_t - The id of a Network Environment object.
-+
-+ @Return        0 on success; Error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE_COMPAT  _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(21), ioc_compat_fm_obj_t)
-+#endif
-+#define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(21), ioc_fm_obj_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_KgSchemeSet
-+
-+ @Description   Initializing or modifying and enabling a scheme for the KeyGen.
-+                This routine should be called for adding or modifying a scheme.
-+                When a scheme needs modifying, the API requires that it will be
-+                rewritten. In such a case 'modify' should be TRUE. If the
-+                routine is called for a valid scheme and 'modify' is FALSE,
-+                it will return error.
-+
-+ @Param[in,out] ioc_fm_pcd_kg_scheme_params_t   A structure of parameters for defining the scheme
-+
-+ @Return        0 on success; Error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_KG_SCHEME_SET_COMPAT     _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(24), ioc_compat_fm_pcd_kg_scheme_params_t)
-+#endif
-+#define FM_PCD_IOC_KG_SCHEME_SET    _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(24), ioc_fm_pcd_kg_scheme_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_KgSchemeDelete
-+
-+ @Description   Deleting an initialized scheme.
-+
-+ @Param[in]     ioc_fm_obj_t        scheme id as initalized by application at FM_PCD_IOC_KG_SET_SCHEME
-+
-+ @Return        0 on success; Error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_KG_SCHEME_DELETE_COMPAT  _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(25), ioc_compat_fm_obj_t)
-+#endif
-+#define FM_PCD_IOC_KG_SCHEME_DELETE     _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(25), ioc_fm_obj_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_CcRootBuild
-+
-+ @Description   This routine must be called to define a complete coarse
-+                classification tree. This is the way to define coarse
-+                classification to a certain flow - the KeyGen schemes
-+                may point only to trees defined in this way.
-+
-+ @Param[in,out] ioc_fm_pcd_cc_tree_params_t     A structure of parameters to define the tree.
-+
-+ @Return        0 on success; Error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_CC_ROOT_BUILD_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(26), compat_uptr_t)
-+#endif
-+#define FM_PCD_IOC_CC_ROOT_BUILD    _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(26), void *) /* workaround ...*/
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_CcRootDelete
-+
-+ @Description   Deleting a built tree.
-+
-+ @Param[in]     ioc_fm_obj_t - The id of a CC tree.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_CC_ROOT_DELETE_COMPAT    _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(27), ioc_compat_fm_obj_t)
-+#endif
-+#define FM_PCD_IOC_CC_ROOT_DELETE    _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(27), ioc_fm_obj_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableSet
-+
-+ @Description   This routine should be called for each CC (coarse classification)
-+                node. The whole CC tree should be built bottom up so that each
-+                node points to already defined nodes. p_NodeId returns the node
-+                Id to be used by other nodes.
-+
-+ @Param[in,out] ioc_fm_pcd_cc_node_params_t       A structure for defining the CC node params
-+
-+ @Return        0 on success; Error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_MATCH_TABLE_SET_COMPAT    _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(28), compat_uptr_t)
-+#endif
-+#define FM_PCD_IOC_MATCH_TABLE_SET    _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(28), void *) /* workaround ...*/
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableDelete
-+
-+ @Description   Deleting a built node.
-+
-+ @Param[in]     ioc_fm_obj_t - The id of a CC node.
-+
-+ @Return        0 on success; Error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_MATCH_TABLE_DELETE_COMPAT    _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(29), ioc_compat_fm_obj_t)
-+#endif
-+#define FM_PCD_IOC_MATCH_TABLE_DELETE   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(29), ioc_fm_obj_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_CcRootModifyNextEngine
-+
-+ @Description   Modify the Next Engine Parameters in the entry of the tree.
-+
-+ @Param[in]     ioc_fm_pcd_cc_tree_modify_next_engine_params_t - Pointer to a structure with the relevant parameters
-+
-+ @Return        0 on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_CcRootBuild().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_CC_ROOT_MODIFY_NEXT_ENGINE_COMPAT   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(30), ioc_compat_fm_pcd_cc_tree_modify_next_engine_params_t)
-+#endif
-+#define FM_PCD_IOC_CC_ROOT_MODIFY_NEXT_ENGINE   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(30), ioc_fm_pcd_cc_tree_modify_next_engine_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableModifyNextEngine
-+
-+ @Description   Modify the Next Engine Parameters in the relevant key entry of the node.
-+
-+ @Param[in]     ioc_fm_pcd_cc_node_modify_next_engine_params_t  A pointer to a structure with the relevant parameters
-+
-+ @Return        0 on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_NEXT_ENGINE_COMPAT   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(31), ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t)
-+#endif
-+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_NEXT_ENGINE   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(31), ioc_fm_pcd_cc_node_modify_next_engine_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableModifyMissNextEngine
-+
-+ @Description   Modify the Next Engine Parameters of the Miss key case of the node.
-+
-+ @Param[in]     ioc_fm_pcd_cc_node_modify_next_engine_params_t - Pointer to a structure with the relevant parameters
-+
-+ @Return        0 on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_MISS_NEXT_ENGINE_COMPAT   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(32), ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t)
-+#endif
-+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_MISS_NEXT_ENGINE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(32), ioc_fm_pcd_cc_node_modify_next_engine_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableRemoveKey
-+
-+ @Description   Remove the key (including next engine parameters of this key)
-+                defined by the index of the relevant node.
-+
-+ @Param[in]     ioc_fm_pcd_cc_node_remove_key_params_t  A pointer to a structure with the relevant parameters
-+
-+ @Return        0 on success; Error code otherwise.
-+
-+ @Cautions      Allowed only after FM_PCD_MatchTableSet() has been called for this
-+                node and for all of the nodes that lead to it.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_MATCH_TABLE_REMOVE_KEY_COMPAT    _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(33), ioc_compat_fm_pcd_cc_node_remove_key_params_t)
-+#endif
-+#define FM_PCD_IOC_MATCH_TABLE_REMOVE_KEY   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(33), ioc_fm_pcd_cc_node_remove_key_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableAddKey
-+
-+ @Description   Add the key (including next engine parameters of this key in the
-+                index defined by the keyIndex. Note that 'FM_PCD_LAST_KEY_INDEX'
-+                may be used when the user doesn't care about the position of the
-+                key in the table - in that case, the key will be automatically
-+                added by the driver in the last available entry.
-+
-+ @Param[in]     ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t  A pointer to a structure with the relevant parameters
-+
-+ @Return        0 on success; Error code otherwise.
-+
-+ @Cautions      Allowed only after FM_PCD_MatchTableSet() has been called for this
-+                node and for all of the nodes that lead to it.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_MATCH_TABLE_ADD_KEY_COMPAT   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(34), ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
-+#endif
-+#define FM_PCD_IOC_MATCH_TABLE_ADD_KEY  _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(34), ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableModifyKeyAndNextEngine
-+
-+ @Description   Modify the key and Next Engine Parameters of this key in the index defined by key_index.
-+
-+ @Param[in]     ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t  A pointer to a structure with the relevant parameters
-+
-+ @Return        0 on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_MatchTableSet() not only of the relevnt node but also
-+                the node that points to this node
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_AND_NEXT_ENGINE_COMPAT    _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(35), ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
-+#endif
-+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_AND_NEXT_ENGINE   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(35), ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_MatchTableModifyKey
-+
-+ @Description   Modify the key at the index defined by key_index.
-+
-+ @Param[in]     ioc_fm_pcd_cc_node_modify_key_params_t - Pointer to a structure with the relevant parameters
-+
-+ @Return        0 on success; Error code otherwise.
-+
-+ @Cautions      Allowed only after FM_PCD_MatchTableSet() has been called for this
-+                node and for all of the nodes that lead to it.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_COMPAT    _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(36), ioc_compat_fm_pcd_cc_node_modify_key_params_t)
-+#endif
-+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(36), ioc_fm_pcd_cc_node_modify_key_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_HashTableSet
-+
-+ @Description   This routine initializes a hash table structure.
-+                KeyGen hash result determines the hash bucket.
-+                Next, KeyGen key is compared against all keys of this
-+                bucket (exact match).
-+                Number of sets (number of buckets) of the hash equals to the
-+                number of 1-s in 'hash_res_mask' in the provided parameters.
-+                Number of hash table ways is then calculated by dividing
-+                'max_num_of_keys' equally between the hash sets. This is the maximal
-+                number of keys that a hash bucket may hold.
-+                The hash table is initialized empty and keys may be
-+                added to it following the initialization. Keys masks are not
-+                supported in current hash table implementation.
-+                The initialized hash table can be integrated as a node in a
-+                CC tree.
-+
-+ @Param[in,out] ioc_fm_pcd_hash_table_params_t - Pointer to a structure with the relevant parameters
-+
-+ @Return        0 on success; Error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_HASH_TABLE_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_compat_fm_pcd_hash_table_params_t)
-+#endif
-+#define FM_PCD_IOC_HASH_TABLE_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_fm_pcd_hash_table_params_t)
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_HashTableDelete
-+
-+ @Description   This routine deletes the provided hash table and released all
-+                its allocated resources.
-+
-+ @Param[in]     ioc_fm_obj_t - The ID of a hash table.
-+
-+ @Return        0 on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_HashTableSet().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_HASH_TABLE_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_compat_fm_obj_t)
-+#endif
-+#define FM_PCD_IOC_HASH_TABLE_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_fm_obj_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_HashTableAddKey
-+
-+ @Description   This routine adds the provided key (including next engine
-+                parameters of this key) to the hash table.
-+                The key is added as the last key of the bucket that it is
-+                mapped to.
-+
-+ @Param[in]     ioc_fm_pcd_hash_table_add_key_params_t - Pointer to a structure with the relevant parameters
-+
-+ @Return        0 on success; error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_HashTableSet().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_HASH_TABLE_ADD_KEY_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(39), ioc_compat_fm_pcd_hash_table_add_key_params_t)
-+#endif
-+#define FM_PCD_IOC_HASH_TABLE_ADD_KEY _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(39), ioc_fm_pcd_hash_table_add_key_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_HashTableRemoveKey
-+
-+ @Description   This routine removes the requested key (including next engine
-+                parameters of this key) from the hash table.
-+
-+ @Param[in]     ioc_fm_pcd_hash_table_remove_key_params_t - Pointer to a structure with the relevant parameters
-+
-+ @Return        0 on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_HashTableSet().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_HASH_TABLE_REMOVE_KEY_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(40), ioc_compat_fm_pcd_hash_table_remove_key_params_t)
-+#endif
-+#define FM_PCD_IOC_HASH_TABLE_REMOVE_KEY _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(40), ioc_fm_pcd_hash_table_remove_key_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_PlcrProfileSet
-+
-+ @Description   Sets a profile entry in the policer profile table.
-+                The routine overrides any existing value.
-+
-+ @Param[in,out] ioc_fm_pcd_plcr_profile_params_t    A structure of parameters for defining a
-+                                                    policer profile entry.
-+
-+ @Return        0 on success; Error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_PLCR_PROFILE_SET_COMPAT     _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_compat_fm_pcd_plcr_profile_params_t)
-+#endif
-+#define FM_PCD_IOC_PLCR_PROFILE_SET     _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_fm_pcd_plcr_profile_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_PlcrProfileDelete
-+
-+ @Description   Delete a profile entry in the policer profile table.
-+                The routine set entry to invalid.
-+
-+ @Param[in]     ioc_fm_obj_t        The id of a policer profile.
-+
-+ @Return        0 on success; Error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_PLCR_PROFILE_DELETE_COMPAT   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_compat_fm_obj_t)
-+#endif
-+#define FM_PCD_IOC_PLCR_PROFILE_DELETE  _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_fm_obj_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ManipNodeSet
-+
-+ @Description   This routine should be called for defining a manipulation
-+                node. A manipulation node must be defined before the CC node
-+                that precedes it.
-+
-+ @Param[in]     ioc_fm_pcd_manip_params_t - A structure of parameters defining the manipulation
-+
-+ @Return        A handle to the initialized object on success; NULL code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_MANIP_NODE_SET_COMPAT    _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(43), ioc_compat_fm_pcd_manip_params_t)
-+#endif
-+#define FM_PCD_IOC_MANIP_NODE_SET   _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(43), ioc_fm_pcd_manip_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ManipNodeReplace
-+
-+ @Description   Change existing manipulation node to be according to new requirement.
-+                (Here, it's implemented as a variant of the same IOCTL as for
-+                FM_PCD_ManipNodeSet(), and one that when called, the 'id' member
-+                in its 'ioc_fm_pcd_manip_params_t' argument is set to contain
-+                the manip node's handle)
-+
-+ @Param[in]     ioc_fm_pcd_manip_params_t - A structure of parameters defining the manipulation
-+
-+ @Return        0 on success; error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_ManipNodeSet().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_MANIP_NODE_REPLACE_COMPAT    FM_PCD_IOC_MANIP_NODE_SET_COMPAT
-+#endif
-+#define FM_PCD_IOC_MANIP_NODE_REPLACE           FM_PCD_IOC_MANIP_NODE_SET
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ManipNodeDelete
-+
-+ @Description   Delete an existing manipulation node.
-+
-+ @Param[in]     ioc_fm_obj_t       The id of the manipulation node to delete.
-+
-+ @Return        0 on success; error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_ManipNodeSet().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_MANIP_NODE_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(44), ioc_compat_fm_obj_t)
-+#endif
-+#define FM_PCD_IOC_MANIP_NODE_DELETE    _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(44), ioc_fm_obj_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_ManipGetStatistics
-+
-+ @Description   Retrieve the manipulation statistics.
-+
-+ @Param[in]     h_ManipNode         A handle to a manipulation node.
-+ @Param[out]    p_FmPcdManipStats   A structure for retrieving the manipulation statistics
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_ManipNodeSet().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_MANIP_GET_STATS_COMPAT  _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(50), ioc_compat_fm_pcd_manip_get_stats_t)
-+#endif
-+#define FM_PCD_IOC_MANIP_GET_STATS   _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(50), ioc_fm_pcd_manip_get_stats_t)
-+
-+/**************************************************************************//**
-+@Function      FM_PCD_SetAdvancedOffloadSupport
-+
-+@Description   This routine must be called in order to support the following features:
-+               IP-fragmentation, IP-reassembly, IPsec, Header-manipulation, frame-replicator.
-+
-+@Param[in]     h_FmPcd         FM PCD module descriptor.
-+
-+@Return        0 on success; error code otherwise.
-+
-+@Cautions      Allowed only when PCD is disabled.
-+*//***************************************************************************/
-+#define FM_PCD_IOC_SET_ADVANCED_OFFLOAD_SUPPORT _IO(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(45))
-+
-+#if (DPAA_VERSION >= 11)
-+/**************************************************************************//**
-+ @Function      FM_PCD_FrmReplicSetGroup
-+
-+ @Description   Initialize a Frame Replicator group.
-+
-+ @Param[in]     h_FmPcd                FM PCD module descriptor.
-+ @Param[in]     p_FrmReplicGroupParam  A structure of parameters for the initialization of
-+                                       the frame replicator group.
-+
-+ @Return        A handle to the initialized object on success; NULL code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_Init().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_FRM_REPLIC_GROUP_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(46), ioc_compat_fm_pcd_frm_replic_group_params_t)
-+#endif
-+#define FM_PCD_IOC_FRM_REPLIC_GROUP_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(46), ioc_fm_pcd_frm_replic_group_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_FrmReplicDeleteGroup
-+
-+ @Description   Delete a Frame Replicator group.
-+
-+ @Param[in]     h_FrmReplicGroup  A handle to the frame replicator group.
-+
-+ @Return        E_OK on success;  Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_FrmReplicSetGroup().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_FRM_REPLIC_GROUP_DELETE_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(47), ioc_compat_fm_obj_t)
-+#endif
-+#define FM_PCD_IOC_FRM_REPLIC_GROUP_DELETE _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(47), ioc_fm_obj_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_FrmReplicAddMember
-+
-+ @Description   Add the member in the index defined by the memberIndex.
-+
-+ @Param[in]     h_FrmReplicGroup   A handle to the frame replicator group.
-+ @Param[in]     memberIndex        member index for adding.
-+ @Param[in]     p_MemberParams     A pointer to the new member parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_FrmReplicSetGroup() of this group.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_FRM_REPLIC_MEMBER_ADD_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(48), ioc_compat_fm_pcd_frm_replic_member_params_t)
-+#endif
-+#define FM_PCD_IOC_FRM_REPLIC_MEMBER_ADD _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(48), ioc_fm_pcd_frm_replic_member_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PCD_FrmReplicRemoveMember
-+
-+ @Description   Remove the member defined by the index from the relevant group.
-+
-+ @Param[in]     h_FrmReplicGroup   A handle to the frame replicator group.
-+ @Param[in]     memberIndex        member index for removing.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PCD_FrmReplicSetGroup() of this group.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_FRM_REPLIC_MEMBER_REMOVE_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(49), ioc_compat_fm_pcd_frm_replic_member_t)
-+#endif
-+#define FM_PCD_IOC_FRM_REPLIC_MEMBER_REMOVE _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(49), ioc_fm_pcd_frm_replic_member_t)
-+
-+#endif
-+
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+/**************************************************************************//**
-+ @Function      FM_PCD_StatisticsSetNode
-+
-+ @Description   This routine should be called for defining a statistics node.
-+
-+ @Param[in,out] ioc_fm_pcd_stats_params_t A structure of parameters defining the statistics
-+
-+ @Return        0 on success; Error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_STATISTICS_SET_NODE_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(45), void *)
-+#endif
-+#define FM_PCD_IOC_STATISTICS_SET_NODE _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(45), void *)
-+
-+#endif /* FM_CAPWAP_SUPPORT */
-+
-+#ifdef NCSW_BACKWARD_COMPATIBLE_API
-+#if defined(CONFIG_COMPAT)
-+#define FM_PCD_IOC_SET_NET_ENV_CHARACTERISTICS_COMPAT \
-+                                                FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET_COMPAT
-+#define FM_PCD_IOC_DELETE_NET_ENV_CHARACTERISTICS_COMPAT \
-+                                                FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE_COMPAT
-+#define FM_PCD_IOC_KG_SET_SCHEME_COMPAT         FM_PCD_IOC_KG_SCHEME_SET_COMPAT
-+#define FM_PCD_IOC_KG_DEL_SCHEME_COMPAT         FM_PCD_IOC_KG_SCHEME_DELETE_COMPAT
-+#define FM_PCD_IOC_CC_BUILD_TREE_COMPAT         FM_PCD_IOC_CC_ROOT_BUILD_COMPAT
-+#define FM_PCD_IOC_CC_DELETE_TREE_COMPAT        FM_PCD_IOC_CC_ROOT_DELETE_COMPAT
-+#define FM_PCD_IOC_CC_DELETE_NODE_COMPAT        FM_PCD_IOC_MATCH_TABLE_DELETE_COMPAT
-+#define FM_PCD_IOC_CC_TREE_MODIFY_NEXT_ENGINE_COMPAT \
-+                                                FM_PCD_IOC_CC_ROOT_MODIFY_NEXT_ENGINE_COMPAT
-+#define FM_PCD_IOC_CC_NODE_MODIFY_NEXT_ENGINE_COMPAT \
-+                                                FM_PCD_IOC_MATCH_TABLE_MODIFY_NEXT_ENGINE_COMPAT
-+#define FM_PCD_IOC_CC_NODE_MODIFY_MISS_NEXT_ENGINE_COMPAT \
-+                                                FM_PCD_IOC_MATCH_TABLE_MODIFY_MISS_NEXT_ENGINE_COMPAT
-+#define FM_PCD_IOC_CC_NODE_REMOVE_KEY_COMPAT    FM_PCD_IOC_MATCH_TABLE_REMOVE_KEY_COMPAT
-+#define FM_PCD_IOC_CC_NODE_ADD_KEY_COMPAT       FM_PCD_IOC_MATCH_TABLE_ADD_KEY_COMPAT
-+#define FM_PCD_IOC_CC_NODE_MODIFY_KEY_AND_NEXT_ENGINE_COMPAT \
-+                                                FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_AND_NEXT_ENGINE_COMPAT
-+#define FM_PCD_IOC_CC_NODE_MODIFY_KEY_COMPAT    FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_COMPAT
-+#define FM_PCD_IOC_PLCR_SET_PROFILE_COMPAT      FM_PCD_IOC_PLCR_PROFILE_SET_COMPAT
-+#define FM_PCD_IOC_PLCR_DEL_PROFILE_COMPAT      FM_PCD_IOC_PLCR_PROFILE_DELETE_COMPAT
-+#define FM_PCD_IOC_MANIP_SET_NODE_COMPAT        FM_PCD_IOC_MANIP_NODE_SET_COMPAT
-+#define FM_PCD_IOC_MANIP_DELETE_NODE_COMPAT     FM_PCD_IOC_MANIP_NODE_DELETE_COMPAT
-+#endif
-+#define FM_PCD_IOC_SET_NET_ENV_CHARACTERISTICS  FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET
-+#define FM_PCD_IOC_DELETE_NET_ENV_CHARACTERISTICS \
-+                                                FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE
-+#define FM_PCD_IOC_KG_SET_SCHEME                FM_PCD_IOC_KG_SCHEME_SET
-+#define FM_PCD_IOC_KG_DEL_SCHEME                FM_PCD_IOC_KG_SCHEME_DELETE
-+#define FM_PCD_IOC_CC_BUILD_TREE                FM_PCD_IOC_CC_ROOT_BUILD
-+#define FM_PCD_IOC_CC_DELETE_TREE               FM_PCD_IOC_CC_ROOT_DELETE
-+#define FM_PCD_IOC_CC_DELETE_NODE               FM_PCD_IOC_MATCH_TABLE_DELETE
-+#define FM_PCD_IOC_CC_TREE_MODIFY_NEXT_ENGINE   FM_PCD_IOC_CC_ROOT_MODIFY_NEXT_ENGINE
-+#define FM_PCD_IOC_CC_NODE_MODIFY_NEXT_ENGINE   FM_PCD_IOC_MATCH_TABLE_MODIFY_NEXT_ENGINE
-+#define FM_PCD_IOC_CC_NODE_MODIFY_MISS_NEXT_ENGINE \
-+                                                FM_PCD_IOC_MATCH_TABLE_MODIFY_MISS_NEXT_ENGINE
-+#define FM_PCD_IOC_CC_NODE_REMOVE_KEY           FM_PCD_IOC_MATCH_TABLE_REMOVE_KEY
-+#define FM_PCD_IOC_CC_NODE_ADD_KEY              FM_PCD_IOC_MATCH_TABLE_ADD_KEY
-+#define FM_PCD_IOC_CC_NODE_MODIFY_KEY_AND_NEXT_ENGINE \
-+                                                FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_AND_NEXT_ENGINE
-+#define FM_PCD_IOC_CC_NODE_MODIFY_KEY           FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY
-+#define FM_PCD_IOC_PLCR_SET_PROFILE             FM_PCD_IOC_PLCR_PROFILE_SET
-+#define FM_PCD_IOC_PLCR_DEL_PROFILE             FM_PCD_IOC_PLCR_PROFILE_DELETE
-+#define FM_PCD_IOC_MANIP_SET_NODE               FM_PCD_IOC_MANIP_NODE_SET
-+#define FM_PCD_IOC_MANIP_DELETE_NODE            FM_PCD_IOC_MANIP_NODE_DELETE
-+#endif /* NCSW_BACKWARD_COMPATIBLE_API */
-+
-+#endif /* __FM_PCD_IOCTLS_H */
-+/** @} */ /* end of lnx_ioctl_FM_PCD_Runtime_grp group */
-+/** @} */ /* end of lnx_ioctl_FM_PCD_grp group */
-+/** @} */ /* end of lnx_ioctl_FM_grp group */
---- /dev/null
-+++ b/include/uapi/linux/fmd/Peripherals/fm_port_ioctls.h
-@@ -0,0 +1,948 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc.
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/******************************************************************************
-+ @File          fm_port_ioctls.h
-+
-+ @Description   FM Port routines
-+*//***************************************************************************/
-+#ifndef __FM_PORT_IOCTLS_H
-+#define __FM_PORT_IOCTLS_H
-+
-+#include "enet_ext.h"
-+#include "net_ioctls.h"
-+#include "fm_ioctls.h"
-+#include "fm_pcd_ioctls.h"
-+
-+
-+/**************************************************************************//**
-+
-+ @Group         lnx_ioctl_FM_grp Frame Manager Linux IOCTL API
-+
-+ @Description   FM Linux ioctls definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Group         lnx_ioctl_FM_PORT_grp FM Port
-+
-+ @Description   FM Port API
-+
-+                The FM uses a general module called "port" to represent a Tx port
-+                (MAC), an Rx port (MAC), offline parsing flow or host command
-+                flow. There may be up to 17 (may change) ports in an FM - 5 Tx
-+                ports (4 for the 1G MACs, 1 for the 10G MAC), 5 Rx Ports, and 7
-+                Host command/Offline parsing ports. The SW driver manages these
-+                ports as sub-modules of the FM, i.e. after an FM is initialized,
-+                its ports may be initialized and operated upon.
-+
-+                The port is initialized aware of its type, but other functions on
-+                a port may be indifferent to its type. When necessary, the driver
-+                verifies coherency and returns error if applicable.
-+
-+                On initialization, user specifies the port type and it's index
-+                (relative to the port's type). Host command and Offline parsing
-+                ports share the same id range, I.e user may not initialized host
-+                command port 0 and offline parsing port 0.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   An enum for defining port PCD modes.
-+                (Must match enum e_FmPortPcdSupport defined in fm_port_ext.h)
-+
-+                This enum defines the superset of PCD engines support - i.e. not
-+                all engines have to be used, but all have to be enabled. The real
-+                flow of a specific frame depends on the PCD configuration and the
-+                frame headers and payload.
-+                Note: the first engine and the first engine after the parser (if
-+                exists) should be in order, the order is important as it will
-+                define the flow of the port. However, as for the rest engines
-+                (the ones that follows), the order is not important anymore as
-+                it is defined by the PCD graph itself.
-+*//***************************************************************************/
-+typedef enum ioc_fm_port_pcd_support {
-+      e_IOC_FM_PORT_PCD_SUPPORT_NONE = 0                /**< BMI to BMI, PCD is not used */
-+    , e_IOC_FM_PORT_PCD_SUPPORT_PRS_ONLY                /**< Use only Parser */
-+    , e_IOC_FM_PORT_PCD_SUPPORT_PLCR_ONLY               /**< Use only Policer */
-+    , e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR            /**< Use Parser and Policer */
-+    , e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG              /**< Use Parser and Keygen */
-+    , e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC       /**< Use Parser, Keygen and Coarse Classification */
-+    , e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR
-+                                                        /**< Use all PCD engines */
-+    , e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR     /**< Use Parser, Keygen and Policer */
-+    , e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_CC              /**< Use Parser and Coarse Classification */
-+    , e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_CC_AND_PLCR     /**< Use Parser and Coarse Classification and Policer */
-+    , e_IOC_FM_PORT_PCD_SUPPORT_CC_ONLY                 /**< Use only Coarse Classification */
-+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
-+    , e_IOC_FM_PORT_PCD_SUPPORT_CC_AND_KG               /**< Use Coarse Classification,and Keygen */
-+    , e_IOC_FM_PORT_PCD_SUPPORT_CC_AND_KG_AND_PLCR      /**< Use Coarse Classification, Keygen and Policer */
-+#endif /* FM_CAPWAP_SUPPORT */
-+} ioc_fm_port_pcd_support;
-+
-+
-+/**************************************************************************//**
-+ @Collection   FM Frame error
-+*//***************************************************************************/
-+typedef uint32_t    ioc_fm_port_frame_err_select_t;     /**< typedef for defining Frame Descriptor errors */
-+
-+/* @} */
-+
-+
-+/**************************************************************************//**
-+ @Description   An enum for defining Dual Tx rate limiting scale.
-+                (Must match e_FmPortDualRateLimiterScaleDown defined in fm_port_ext.h)
-+*//***************************************************************************/
-+typedef enum ioc_fm_port_dual_rate_limiter_scale_down {
-+    e_IOC_FM_PORT_DUAL_RATE_LIMITER_NONE = 0,           /**< Use only single rate limiter  */
-+    e_IOC_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_2,    /**< Divide high rate limiter by 2 */
-+    e_IOC_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_4,    /**< Divide high rate limiter by 4 */
-+    e_IOC_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_8     /**< Divide high rate limiter by 8 */
-+} ioc_fm_port_dual_rate_limiter_scale_down;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining Tx rate limiting
-+                (Must match struct t_FmPortRateLimit defined in fm_port_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_port_rate_limit_t {
-+    uint16_t                            max_burst_size;         /**< in KBytes for Tx ports, in frames
-+                                                                     for offline parsing ports. (note that
-+                                                                     for early chips burst size is
-+                                                                     rounded up to a multiply of 1000 frames).*/
-+    uint32_t                            rate_limit;             /**< in Kb/sec for Tx ports, in frame/sec for
-+                                                                     offline parsing ports. Rate limit refers to
-+                                                                     data rate (rather than line rate). */
-+    ioc_fm_port_dual_rate_limiter_scale_down rate_limit_divider;    /**< For offline parsing ports only. Not-valid
-+                                                                     for some earlier chip revisions */
-+} ioc_fm_port_rate_limit_t;
-+
-+
-+
-+/**************************************************************************//**
-+ @Group         lnx_ioctl_FM_PORT_runtime_control_grp FM Port Runtime Control Unit
-+
-+ @Description   FM Port Runtime control unit API functions, definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   An enum for defining FM Port counters.
-+                (Must match enum e_FmPortCounters defined in fm_port_ext.h)
-+*//***************************************************************************/
-+typedef enum ioc_fm_port_counters {
-+    e_IOC_FM_PORT_COUNTERS_CYCLE,                       /**< BMI performance counter */
-+    e_IOC_FM_PORT_COUNTERS_TASK_UTIL,                   /**< BMI performance counter */
-+    e_IOC_FM_PORT_COUNTERS_QUEUE_UTIL,                  /**< BMI performance counter */
-+    e_IOC_FM_PORT_COUNTERS_DMA_UTIL,                    /**< BMI performance counter */
-+    e_IOC_FM_PORT_COUNTERS_FIFO_UTIL,                   /**< BMI performance counter */
-+    e_IOC_FM_PORT_COUNTERS_RX_PAUSE_ACTIVATION,         /**< BMI Rx only performance counter */
-+    e_IOC_FM_PORT_COUNTERS_FRAME,                       /**< BMI statistics counter */
-+    e_IOC_FM_PORT_COUNTERS_DISCARD_FRAME,               /**< BMI statistics counter */
-+    e_IOC_FM_PORT_COUNTERS_DEALLOC_BUF,                 /**< BMI deallocate buffer statistics counter */
-+    e_IOC_FM_PORT_COUNTERS_RX_BAD_FRAME,                /**< BMI Rx only statistics counter */
-+    e_IOC_FM_PORT_COUNTERS_RX_LARGE_FRAME,              /**< BMI Rx only statistics counter */
-+    e_IOC_FM_PORT_COUNTERS_RX_FILTER_FRAME,             /**< BMI Rx & OP only statistics counter */
-+    e_IOC_FM_PORT_COUNTERS_RX_LIST_DMA_ERR,             /**< BMI Rx, OP & HC only statistics counter */
-+    e_IOC_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD,   /**< BMI Rx, OP & HC statistics counter */
-+    e_IOC_FM_PORT_COUNTERS_PREPARE_TO_ENQUEUE_COUNTER,  /**< BMI Rx, OP & HC only statistics counter */
-+    e_IOC_FM_PORT_COUNTERS_WRED_DISCARD,                /**< BMI OP & HC only statistics counter */
-+    e_IOC_FM_PORT_COUNTERS_LENGTH_ERR,                  /**< BMI non-Rx statistics counter */
-+    e_IOC_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT,           /**< BMI non-Rx statistics counter */
-+    e_IOC_FM_PORT_COUNTERS_DEQ_TOTAL,                   /**< QMI total QM dequeues counter */
-+    e_IOC_FM_PORT_COUNTERS_ENQ_TOTAL,                   /**< QMI total QM enqueues counter */
-+    e_IOC_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT,            /**< QMI counter */
-+    e_IOC_FM_PORT_COUNTERS_DEQ_CONFIRM                  /**< QMI counter */
-+} ioc_fm_port_counters;
-+
-+typedef struct ioc_fm_port_bmi_stats_t {
-+    uint32_t cnt_cycle;
-+    uint32_t cnt_task_util;
-+    uint32_t cnt_queue_util;
-+    uint32_t cnt_dma_util;
-+    uint32_t cnt_fifo_util;
-+    uint32_t cnt_rx_pause_activation;
-+    uint32_t cnt_frame;
-+    uint32_t cnt_discard_frame;
-+    uint32_t cnt_dealloc_buf;
-+    uint32_t cnt_rx_bad_frame;
-+    uint32_t cnt_rx_large_frame;
-+    uint32_t cnt_rx_filter_frame;
-+    uint32_t cnt_rx_list_dma_err;
-+    uint32_t cnt_rx_out_of_buffers_discard;
-+    uint32_t cnt_wred_discard;
-+    uint32_t cnt_length_err;
-+    uint32_t cnt_unsupported_format;
-+} ioc_fm_port_bmi_stats_t;
-+
-+/**************************************************************************//**
-+ @Description   Structure for Port id parameters.
-+                (Description may be inaccurate;
-+                must match struct t_FmPortCongestionGrps defined in fm_port_ext.h)
-+
-+                Fields commented 'IN' are passed by the port module to be used
-+                by the FM module.
-+                Fields commented 'OUT' will be filled by FM before returning to port.
-+*//***************************************************************************/
-+typedef struct ioc_fm_port_congestion_groups_t {
-+    uint16_t    num_of_congestion_grps_to_consider;     /**< The number of required congestion groups
-+                                                             to define the size of the following array */
-+    uint8_t     congestion_grps_to_consider [FM_PORT_NUM_OF_CONGESTION_GRPS];
-+                                                        /**< An array of CG indexes;
-+                                                             Note that the size of the array should be
-+                                                             'num_of_congestion_grps_to_consider'. */
-+#if DPAA_VERSION >= 11
-+    bool        pfc_priorities_enable[FM_PORT_NUM_OF_CONGESTION_GRPS][FM_MAX_NUM_OF_PFC_PRIORITIES];
-+                                                        /**< A matrix that represents the map between the CG ids
-+                                                             defined in 'congestion_grps_to_consider' to the priorities
-+                                                             mapping array. */
-+#endif /* DPAA_VERSION >= 11 */
-+} ioc_fm_port_congestion_groups_t;
-+
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_Disable
-+
-+ @Description   Gracefully disable an FM port. The port will not start new tasks after all
-+                tasks associated with the port are terminated.
-+
-+ @Return        0 on success; error code otherwise.
-+
-+ @Cautions      This is a blocking routine, it returns after port is
-+                gracefully stopped, i.e. the port will not except new frames,
-+                but it will finish all frames or tasks which were already began
-+*//***************************************************************************/
-+#define FM_PORT_IOC_DISABLE   _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(1))
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_Enable
-+
-+ @Description   A runtime routine provided to allow disable/enable of port.
-+
-+ @Return        0 on success; error code otherwise.
-+*//***************************************************************************/
-+#define FM_PORT_IOC_ENABLE   _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(2))
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_SetRateLimit
-+
-+ @Description   Calling this routine enables rate limit algorithm.
-+                By default, this functionality is disabled.
-+                Note that rate-limit mechanism uses the FM time stamp.
-+                The selected rate limit specified here would be
-+                rounded DOWN to the nearest 16M.
-+
-+                May be used for Tx and offline parsing ports only
-+
-+ @Param[in]     ioc_fm_port_rate_limit A structure of rate limit parameters
-+
-+ @Return        0 on success; error code otherwise.
-+*//***************************************************************************/
-+#define FM_PORT_IOC_SET_RATE_LIMIT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(3), ioc_fm_port_rate_limit_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_DeleteRateLimit
-+
-+ @Description   Calling this routine disables the previously enabled rate limit.
-+
-+                May be used for Tx and offline parsing ports only
-+
-+ @Return        0 on success; error code otherwise.
-+*//***************************************************************************/
-+#define FM_PORT_IOC_DELETE_RATE_LIMIT   _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(5))
-+#define FM_PORT_IOC_REMOVE_RATE_LIMIT   FM_PORT_IOC_DELETE_RATE_LIMIT
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_AddCongestionGrps
-+
-+ @Description   This routine effects the corresponding Tx port.
-+                It should be called in order to enable pause
-+                frame transmission in case of congestion in one or more
-+                of the congestion groups relevant to this port.
-+                Each call to this routine may add one or more congestion
-+                groups to be considered relevant to this port.
-+
-+                May be used for Rx, or RX+OP ports only (depending on chip)
-+
-+ @Param[in]     ioc_fm_port_congestion_groups_t - A pointer to an array of
-+                                                congestion group ids to consider.
-+
-+ @Return        0 on success; error code otherwise.
-+*//***************************************************************************/
-+#define FM_PORT_IOC_ADD_CONGESTION_GRPS    _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(34), ioc_fm_port_congestion_groups_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_RemoveCongestionGrps
-+
-+ @Description   This routine effects the corresponding Tx port. It should be
-+                called when congestion groups were
-+                defined for this port and are no longer relevant, or pause
-+                frames transmitting is not required on their behalf.
-+                Each call to this routine may remove one or more congestion
-+                groups to be considered relevant to this port.
-+
-+                May be used for Rx, or RX+OP ports only (depending on chip)
-+
-+ @Param[in]     ioc_fm_port_congestion_groups_t - A pointer to an array of
-+                                                congestion group ids to consider.
-+
-+ @Return        0 on success; error code otherwise.
-+*//***************************************************************************/
-+#define FM_PORT_IOC_REMOVE_CONGESTION_GRPS    _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(35), ioc_fm_port_congestion_groups_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_SetErrorsRoute
-+
-+ @Description   Errors selected for this routine will cause a frame with that error
-+                to be enqueued to error queue.
-+                Errors not selected for this routine will cause a frame with that error
-+                to be enqueued to the one of the other port queues.
-+                By default all errors are defined to be enqueued to error queue.
-+                Errors that were configured to be discarded (at initialization)
-+                may not be selected here.
-+
-+                May be used for Rx and offline parsing ports only
-+
-+ @Param[in]     ioc_fm_port_frame_err_select_t  A list of errors to enqueue to error queue
-+
-+ @Return        0 on success; error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+                (szbs001: How is it possible to have one function that needs to be
-+                          called BEFORE FM_PORT_Init() implemented as an ioctl,
-+                          which will ALWAYS be called AFTER the FM_PORT_Init()
-+                          for that port!?!?!?!???!?!??!?!?)
-+*//***************************************************************************/
-+#define FM_PORT_IOC_SET_ERRORS_ROUTE   _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(4), ioc_fm_port_frame_err_select_t)
-+
-+
-+/**************************************************************************//**
-+ @Group         lnx_ioctl_FM_PORT_pcd_runtime_control_grp FM Port PCD Runtime Control Unit
-+
-+ @Description   FM Port PCD Runtime control unit API functions, definitions and enums.
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   A structure defining the KG scheme after the parser.
-+                (Must match struct t_FmPcdKgSchemeSelect defined in fm_port_ext.h)
-+
-+                This is relevant only to change scheme selection mode - from
-+                direct to indirect and vice versa, or when the scheme is selected directly,
-+                to select the scheme id.
-+
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_kg_scheme_select_t {
-+    bool        direct;                     /**< TRUE to use 'scheme_id' directly, FALSE to use LCV.*/
-+    void       *scheme_id;                  /**< Relevant for 'direct'=TRUE only.
-+                                                 'scheme_id' selects the scheme after parser. */
-+} ioc_fm_pcd_kg_scheme_select_t;
-+
-+/**************************************************************************//**
-+ @Description   Scheme IDs structure
-+                (Must match struct t_FmPcdPortSchemesParams defined in fm_port_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_port_schemes_params_t {
-+    uint8_t     num_of_schemes;                         /**< Number of schemes for port to be bound to. */
-+    void        *scheme_ids[FM_PCD_KG_NUM_OF_SCHEMES];  /**< Array of 'num_of_schemes' schemes for the
-+                                                             port to be bound to */
-+} ioc_fm_pcd_port_schemes_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A union for defining port protocol parameters for parser
-+                (Must match union u_FmPcdHdrPrsOpts defined in fm_port_ext.h)
-+*//***************************************************************************/
-+typedef union ioc_fm_pcd_hdr_prs_opts_u {
-+    /* MPLS */
-+    struct {
-+        bool                label_interpretation_enable;/**< When this bit is set, the last MPLS label will be
-+                                                             interpreted as described in HW spec table. When the bit
-+                                                             is cleared, the parser will advance to MPLS next parse */
-+        ioc_net_header_type next_parse;                 /**< must be equal or higher than IPv4 */
-+    } mpls_prs_options;
-+
-+    /* VLAN */
-+    struct {
-+        uint16_t            tag_protocol_id1;           /**< User defined Tag Protocol Identifier, to be recognized
-+                                                             on VLAN TAG on top of 0x8100 and 0x88A8 */
-+        uint16_t            tag_protocol_id2;           /**< User defined Tag Protocol Identifier, to be recognized
-+                                                             on VLAN TAG on top of 0x8100 and 0x88A8 */
-+    } vlan_prs_options;
-+
-+    /* PPP */
-+    struct{
-+        bool                enable_mtu_check;           /**< Check validity of MTU according to RFC2516 */
-+    } pppoe_prs_options;
-+
-+    /* IPV6 */
-+    struct {
-+        bool                routing_hdr_disable;        /**< Disable routing header */
-+    } ipv6_prs_options;
-+
-+    /* UDP */
-+    struct {
-+        bool                pad_ignore_checksum;        /**< TRUE to ignore pad in checksum */
-+    } udp_prs_options;
-+
-+    /* TCP */
-+    struct {
-+        bool                pad_ignore_checksum;        /**< TRUE to ignore pad in checksum */
-+    } tcp_prs_options;
-+} ioc_fm_pcd_hdr_prs_opts_u;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining each header for the parser
-+                (must match struct t_FmPcdPrsAdditionalHdrParams defined in fm_port_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_prs_additional_hdr_params_t {
-+    ioc_net_header_type         hdr;                /**< Selected header */
-+    bool                        err_disable;        /**< TRUE to disable error indication */
-+    bool                        soft_prs_enable;    /**< Enable jump to SW parser when this
-+                                                         header is recognized by the HW parser. */
-+    uint8_t                     index_per_hdr;      /**< Normally 0, if more than one sw parser
-+                                                         attachments exists for the same header,
-+                                                         (in the main sw parser code) use this
-+                                                         index to distinguish between them. */
-+    bool                        use_prs_opts;       /**< TRUE to use parser options. */
-+    ioc_fm_pcd_hdr_prs_opts_u   prs_opts;           /**< A unuion according to header type,
-+                                                         defining the parser options selected.*/
-+} ioc_fm_pcd_prs_additional_hdr_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining port PCD parameters
-+                (Must match t_FmPortPcdPrsParams defined in fm_port_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_port_pcd_prs_params_t {
-+    uint8_t                         prs_res_priv_info;      /**< The private info provides a method of inserting
-+                                                                 port information into the parser result. This information
-+                                                                 may be extracted by KeyGen and be used for frames
-+                                                                 distribution when a per-port distinction is required,
-+                                                                 it may also be used as a port logical id for analyzing
-+                                                                 incoming frames. */
-+    uint8_t                         parsing_offset;         /**< Number of bytes from begining of packet to start parsing */
-+    ioc_net_header_type             first_prs_hdr;          /**< The type of the first header axpected at 'parsing_offset' */
-+    bool                            include_in_prs_statistics; /**< TRUE to include this port in the parser statistics */
-+    uint8_t                         num_of_hdrs_with_additional_params;
-+                                                            /**< Normally 0, some headers may get special parameters */
-+    ioc_fm_pcd_prs_additional_hdr_params_t  additional_params[IOC_FM_PCD_PRS_NUM_OF_HDRS];
-+                                                            /**< 'num_of_hdrs_with_additional_params' structures
-+                                                                  additional parameters for each header that requires them */
-+    bool                            set_vlan_tpid1;         /**< TRUE to configure user selection of Ethertype to
-+                                                                 indicate a VLAN tag (in addition to the TPID values
-+                                                                 0x8100 and 0x88A8). */
-+    uint16_t                        vlan_tpid1;             /**< extra tag to use if set_vlan_tpid1=TRUE. */
-+    bool                            set_vlan_tpid2;         /**< TRUE to configure user selection of Ethertype to
-+                                                                 indicate a VLAN tag (in addition to the TPID values
-+                                                                 0x8100 and 0x88A8). */
-+    uint16_t                        vlan_tpid2;             /**< extra tag to use if set_vlan_tpid1=TRUE. */
-+} ioc_fm_port_pcd_prs_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining coarse alassification parameters
-+                (Must match t_FmPortPcdCcParams defined in fm_port_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_port_pcd_cc_params_t {
-+    void                *cc_tree_id; /**< CC tree id */
-+} ioc_fm_port_pcd_cc_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining keygen parameters
-+                (Must match t_FmPortPcdKgParams defined in fm_port_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_port_pcd_kg_params_t {
-+    uint8_t             num_of_schemes;                 /**< Number of schemes for port to be bound to. */
-+    void               *scheme_ids[FM_PCD_KG_NUM_OF_SCHEMES];
-+                                                        /**< Array of 'num_of_schemes' schemes for the
-+                                                             port to be bound to */
-+    bool                direct_scheme;                  /**< TRUE for going from parser to a specific scheme,
-+                                                             regardless of parser result */
-+    void               *direct_scheme_id;               /**< Scheme id, as returned by FM_PCD_KgSetScheme;
-+                                                             relevant only if direct=TRUE. */
-+} ioc_fm_port_pcd_kg_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining policer parameters
-+                (Must match t_FmPortPcdPlcrParams defined in fm_port_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_port_pcd_plcr_params_t {
-+    void                *plcr_profile_id;               /**< Selected profile handle;
-+                                                             relevant in one of the following cases:
-+                                                             e_IOC_FM_PORT_PCD_SUPPORT_PLCR_ONLY or
-+                                                             e_IOC_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR were selected,
-+                                                             or if any flow uses a KG scheme where policer
-+                                                                profile is not generated (bypass_plcr_profile_generation selected) */
-+} ioc_fm_port_pcd_plcr_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining port PCD parameters
-+                (Must match struct t_FmPortPcdParams defined in fm_port_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_port_pcd_params_t {
-+    ioc_fm_port_pcd_support         pcd_support;    /**< Relevant for Rx and offline ports only.
-+                                                         Describes the active PCD engines for this port. */
-+    void                            *net_env_id;    /**< HL Unused in PLCR only mode */
-+    ioc_fm_port_pcd_prs_params_t    *p_prs_params;  /**< Parser parameters for this port */
-+    ioc_fm_port_pcd_cc_params_t     *p_cc_params;   /**< Coarse classification parameters for this port */
-+    ioc_fm_port_pcd_kg_params_t     *p_kg_params;   /**< Keygen parameters for this port */
-+    ioc_fm_port_pcd_plcr_params_t   *p_plcr_params; /**< Policer parameters for this port */
-+    void                            *p_ip_reassembly_manip;/**< IP Reassembly manipulation */
-+#if (DPAA_VERSION >= 11)
-+    void                            *p_capwap_reassembly_manip;/**< CAPWAP Reassembly manipulation */
-+#endif /* (DPAA_VERSION >= 11) */
-+} ioc_fm_port_pcd_params_t;
-+
-+/**************************************************************************//**
-+ @Description   A structure for defining the Parser starting point
-+                (Must match struct t_FmPcdPrsStart defined in fm_port_ext.h)
-+*//***************************************************************************/
-+typedef struct ioc_fm_pcd_prs_start_t {
-+    uint8_t             parsing_offset; /**< Number of bytes from begining of packet to
-+                                             start parsing */
-+    ioc_net_header_type first_prs_hdr;  /**< The type of the first header axpected at
-+                                             'parsing_offset' */
-+} ioc_fm_pcd_prs_start_t;
-+
-+
-+/**************************************************************************//**
-+ @Description   FQID parameters structure
-+*//***************************************************************************/
-+typedef struct ioc_fm_port_pcd_fqids_params_t {
-+    uint32_t            num_fqids;  /**< Number of fqids to be allocated for the port */
-+    uint8_t             alignment;  /**< Alignment required for this port */
-+    uint32_t            base_fqid;  /**< output parameter - the base fqid */
-+} ioc_fm_port_pcd_fqids_params_t;
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_IOC_ALLOC_PCD_FQIDS
-+
-+ @Description   Allocates FQID's
-+
-+                May be used for Rx and offline parsing ports only
-+
-+ @Param[in,out] ioc_fm_port_pcd_fqids_params_t  Parameters for allocating FQID's
-+
-+ @Return        0 on success; error code otherwise.
-+*//***************************************************************************/
-+#define FM_PORT_IOC_ALLOC_PCD_FQIDS   _IOWR(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(19), ioc_fm_port_pcd_fqids_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_IOC_FREE_PCD_FQIDS
-+
-+ @Description   Frees previously-allocated FQIDs
-+
-+                May be used for Rx and offline parsing ports only
-+
-+ @Param[in]		uint32_t	Base FQID of previously allocated range.
-+
-+ @Return        0 on success; error code otherwise.
-+*//***************************************************************************/
-+#define FM_PORT_IOC_FREE_PCD_FQIDS   _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(19), uint32_t)
-+
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_SetPCD
-+
-+ @Description   Calling this routine defines the port's PCD configuration.
-+                It changes it from its default configuration which is PCD
-+                disabled (BMI to BMI) and configures it according to the passed
-+                parameters.
-+
-+                May be used for Rx and offline parsing ports only
-+
-+ @Param[in]     ioc_fm_port_pcd_params_t    A Structure of parameters defining the port's PCD
-+                                            configuration.
-+
-+ @Return        0 on success; error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PORT_IOC_SET_PCD_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(20), ioc_compat_fm_port_pcd_params_t)
-+#endif
-+#define FM_PORT_IOC_SET_PCD _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(20), ioc_fm_port_pcd_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_DeletePCD
-+
-+ @Description   Calling this routine releases the port's PCD configuration.
-+                The port returns to its default configuration which is PCD
-+                disabled (BMI to BMI) and all PCD configuration is removed.
-+
-+                May be used for Rx and offline parsing ports which are
-+                in PCD mode only
-+
-+ @Return        0 on success; error code otherwise.
-+*//***************************************************************************/
-+#define FM_PORT_IOC_DELETE_PCD _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(21))
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_AttachPCD
-+
-+ @Description   This routine may be called after FM_PORT_DetachPCD was called,
-+                to return to the originally configured PCD support flow.
-+                The couple of routines are used to allow PCD configuration changes
-+                that demand that PCD will not be used while changes take place.
-+
-+                May be used for Rx and offline parsing ports which are
-+                in PCD mode only
-+
-+ @Return        0 on success; error code otherwise.
-+*//***************************************************************************/
-+#define FM_PORT_IOC_ATTACH_PCD _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(23))
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_DetachPCD
-+
-+ @Description   Calling this routine detaches the port from its PCD functionality.
-+                The port returns to its default flow which is BMI to BMI.
-+
-+                May be used for Rx and offline parsing ports which are
-+                in PCD mode only
-+
-+ @Return        0 on success; error code otherwise.
-+*//***************************************************************************/
-+#define FM_PORT_IOC_DETACH_PCD _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(22))
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_PcdPlcrAllocProfiles
-+
-+ @Description   This routine may be called only for ports that use the Policer in
-+                order to allocate private policer profiles.
-+
-+ @Param[in]     uint16_t       The number of required policer profiles
-+
-+ @Return        0 on success; error code otherwise.
-+
-+ @Cautions      Allowed before FM_PORT_SetPCD() only.
-+*//***************************************************************************/
-+#define FM_PORT_IOC_PCD_PLCR_ALLOC_PROFILES     _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(24), uint16_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_PcdPlcrFreeProfiles
-+
-+ @Description   This routine should be called for freeing private policer profiles.
-+
-+ @Return        0 on success; error code otherwise.
-+
-+ @Cautions      Allowed before FM_PORT_SetPCD() only.
-+*//***************************************************************************/
-+#define FM_PORT_IOC_PCD_PLCR_FREE_PROFILES     _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(25))
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_PcdKgModifyInitialScheme
-+
-+ @Description   This routine may be called only for ports that use the keygen in
-+                order to change the initial scheme frame should be routed to.
-+                The change may be of a scheme id (in case of direct mode),
-+                from direct to indirect, or from indirect to direct - specifying the scheme id.
-+
-+ @Param[in]     ioc_fm_pcd_kg_scheme_select_t   A structure of parameters for defining whether
-+                                                a scheme is direct/indirect, and if direct - scheme id.
-+
-+ @Return        0 on success; error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PORT_IOC_PCD_KG_MODIFY_INITIAL_SCHEME_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(26), ioc_compat_fm_pcd_kg_scheme_select_t)
-+#endif
-+#define FM_PORT_IOC_PCD_KG_MODIFY_INITIAL_SCHEME _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(26), ioc_fm_pcd_kg_scheme_select_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_PcdPlcrModifyInitialProfile
-+
-+ @Description   This routine may be called for ports with flows
-+                e_IOC_FM_PCD_SUPPORT_PLCR_ONLY or e_IOC_FM_PCD_SUPPORT_PRS_AND_PLCR  only,
-+                to change the initial Policer profile frame should be routed to.
-+                The change may be of a profile and/or absolute/direct mode selection.
-+
-+ @Param[in]     ioc_fm_obj_t       Policer profile Id as returned from FM_PCD_PlcrSetProfile.
-+
-+ @Return        0 on success; error code otherwise.
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PORT_IOC_PCD_PLCR_MODIFY_INITIAL_PROFILE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(27), ioc_compat_fm_obj_t)
-+#endif
-+#define FM_PORT_IOC_PCD_PLCR_MODIFY_INITIAL_PROFILE _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(27), ioc_fm_obj_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_PcdCcModifyTree
-+
-+ @Description   This routine may be called to change this port connection to
-+                a pre-initializes coarse classification Tree.
-+
-+ @Param[in]     ioc_fm_obj_t    Id of new coarse classification tree selected for this port.
-+
-+ @Return        0 on success; error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_SetPCD() and FM_PORT_DetachPCD()
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PORT_IOC_PCD_CC_MODIFY_TREE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(28), ioc_compat_fm_obj_t)
-+#endif
-+#define FM_PORT_IOC_PCD_CC_MODIFY_TREE _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(28), ioc_fm_obj_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_PcdKgBindSchemes
-+
-+ @Description   These routines may be called for modifying the binding of ports
-+                to schemes. The scheme itself is not added,
-+                just this specific port starts using it.
-+
-+ @Param[in]     ioc_fm_pcd_port_schemes_params_t    Schemes parameters structre
-+
-+ @Return        0 on success; error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_SetPCD().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PORT_IOC_PCD_KG_BIND_SCHEMES_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(30), ioc_compat_fm_pcd_port_schemes_params_t)
-+#endif
-+#define FM_PORT_IOC_PCD_KG_BIND_SCHEMES _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(30), ioc_fm_pcd_port_schemes_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_PcdKgUnbindSchemes
-+
-+ @Description   These routines may be called for modifying the binding of ports
-+                to schemes. The scheme itself is not removed or invalidated,
-+                just this specific port stops using it.
-+
-+ @Param[in]     ioc_fm_pcd_port_schemes_params_t    Schemes parameters structre
-+
-+ @Return        0 on success; error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_SetPCD().
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PORT_IOC_PCD_KG_UNBIND_SCHEMES_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(31), ioc_compat_fm_pcd_port_schemes_params_t)
-+#endif
-+#define FM_PORT_IOC_PCD_KG_UNBIND_SCHEMES _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(31), ioc_fm_pcd_port_schemes_params_t)
-+
-+typedef struct ioc_fm_port_mac_addr_params_t {
-+    uint8_t addr[ENET_NUM_OCTETS_PER_ADDRESS];
-+} ioc_fm_port_mac_addr_params_t;
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_AddHashMacAddr
-+
-+ @Description   Add an Address to the hash table. This is for filter purpose only.
-+
-+ @Param[in]     ioc_fm_port_mac_addr_params_t - Ethernet Mac address
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init(). It is a filter only address.
-+ @Cautions      Some address need to be filtered out in upper FM blocks.
-+*//***************************************************************************/
-+#define FM_PORT_IOC_ADD_RX_HASH_MAC_ADDR   _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(36), ioc_fm_port_mac_addr_params_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_RemoveHashMacAddr
-+
-+ @Description   Delete an Address to the hash table. This is for filter purpose only.
-+
-+ @Param[in]     ioc_fm_port_mac_addr_params_t - Ethernet Mac address
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init().
-+*//***************************************************************************/
-+#define FM_PORT_IOC_REMOVE_RX_HASH_MAC_ADDR   _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(37), ioc_fm_port_mac_addr_params_t)
-+
-+typedef struct ioc_fm_port_tx_pause_frames_params_t {
-+    uint8_t  priority;
-+    uint16_t pause_time;
-+    uint16_t thresh_time;
-+} ioc_fm_port_tx_pause_frames_params_t;
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_SetTxPauseFrames
-+
-+ @Description   Enable/Disable transmission of Pause-Frames.
-+                The routine changes the default configuration:
-+                pause-time - [0xf000]
-+                threshold-time - [0]
-+
-+ @Param[in]     ioc_fm_port_tx_pause_frames_params_t A structure holding the required parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_MAC_Init().
-+                PFC is supported only on new mEMAC; i.e. in MACs that don't have
-+                PFC support (10G-MAC and dTSEC), user should use 'FM_MAC_NO_PFC'
-+                in the 'priority' field.
-+*//***************************************************************************/
-+#define FM_PORT_IOC_SET_TX_PAUSE_FRAMES       _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(40), ioc_fm_port_tx_pause_frames_params_t)
-+
-+typedef struct ioc_fm_port_mac_statistics_t {
-+    /* RMON */
-+        uint64_t  e_stat_pkts_64;            /**< r-10G tr-DT 64 byte frame counter */
-+        uint64_t  e_stat_pkts_65_to_127;     /**< r-10G 65 to 127 byte frame counter */
-+        uint64_t  e_stat_pkts_128_to_255;    /**< r-10G 128 to 255 byte frame counter */
-+        uint64_t  e_stat_pkts_256_to_511;    /**< r-10G 256 to 511 byte frame counter */
-+        uint64_t  e_stat_pkts_512_to_1023;   /**< r-10G 512 to 1023 byte frame counter */
-+        uint64_t  e_stat_pkts_1024_to_1518;  /**< r-10G 1024 to 1518 byte frame counter */
-+        uint64_t  e_stat_pkts_1519_to_1522;  /**< r-10G 1519 to 1522 byte good frame count */
-+    /* */
-+        uint64_t  e_stat_fragments;          /**< Total number of packets that were less than 64 octets long with a wrong CRC.*/
-+        uint64_t  e_stat_jabbers;            /**< Total number of packets longer than valid maximum length octets */
-+        uint64_t  e_stat_drop_events;        /**< number of dropped packets due to internal errors of the MAC Client (during recieve). */
-+        uint64_t  e_stat_CRC_align_errors;   /**< Incremented when frames of correct length but with CRC error are received.*/
-+        uint64_t  e_stat_undersize_pkts;     /**< Incremented for frames under 64 bytes with a valid FCS and otherwise well formed;
-+                                                This count does not include range length errors */
-+        uint64_t  e_stat_oversize_pkts;      /**< Incremented for frames which exceed 1518 (non VLAN) or 1522 (VLAN) and contains
-+                                                a valid FCS and otherwise well formed */
-+    /* Pause */
-+        uint64_t  te_stat_pause;             /**< Pause MAC Control received */
-+        uint64_t  re_stat_pause;             /**< Pause MAC Control sent */
-+    /* MIB II */
-+        uint64_t  if_in_octets;              /**< Total number of byte received. */
-+        uint64_t  if_in_pkts;                /**< Total number of packets received.*/
-+        uint64_t  if_in_ucast_pkts;          /**< Total number of unicast frame received;
-+                                             NOTE: this counter is not supported on dTSEC MAC */
-+        uint64_t  if_in_mcast_pkts;          /**< Total number of multicast frame received*/
-+        uint64_t  if_in_bcast_pkts;          /**< Total number of broadcast frame received */
-+        uint64_t  if_in_discards;            /**< Frames received, but discarded due to problems within the MAC RX. */
-+        uint64_t  if_in_errors;              /**< Number of frames received with error:
-+                                                   - FIFO Overflow Error
-+                                                   - CRC Error
-+                                                   - Frame Too Long Error
-+                                                   - Alignment Error
-+                                                   - The dedicated Error Code (0xfe, not a code error) was received */
-+        uint64_t  if_out_octets;             /**< Total number of byte sent. */
-+        uint64_t  if_out_pkts;               /**< Total number of packets sent .*/
-+        uint64_t  if_out_ucast_pkts;         /**< Total number of unicast frame sent;
-+                                             NOTE: this counter is not supported on dTSEC MAC */
-+        uint64_t  if_out_mcast_pkts;         /**< Total number of multicast frame sent */
-+        uint64_t  if_out_bcast_pkts;         /**< Total number of multicast frame sent */
-+        uint64_t  if_out_discards;           /**< Frames received, but discarded due to problems within the MAC TX N/A!.*/
-+        uint64_t  if_out_errors;             /**< Number of frames transmitted with error:
-+                                                   - FIFO Overflow Error
-+                                                   - FIFO Underflow Error
-+                                                   - Other */
-+} ioc_fm_port_mac_statistics_t;
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_GetStatistics
-+
-+ @Description   get all MAC statistics counters
-+
-+ @Param[out]    ioc_fm_port_mac_statistics_t    A structure holding the statistics
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+#define FM_PORT_IOC_GET_MAC_STATISTICS        _IOR(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(41), ioc_fm_port_mac_statistics_t)
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_ConfigBufferPrefixContent
-+
-+ @Description   Defines the structure, size and content of the application buffer.
-+                The prefix will
-+                In Tx ports, if 'passPrsResult', the application
-+                should set a value to their offsets in the prefix of
-+                the FM will save the first 'privDataSize', than,
-+                depending on 'passPrsResult' and 'passTimeStamp', copy parse result
-+                and timeStamp, and the packet itself (in this order), to the
-+                application buffer, and to offset.
-+                Calling this routine changes the buffer margins definitions
-+                in the internal driver data base from its default
-+                configuration: Data size:  [DEFAULT_FM_SP_bufferPrefixContent_privDataSize]
-+                               Pass Parser result: [DEFAULT_FM_SP_bufferPrefixContent_passPrsResult].
-+                               Pass timestamp: [DEFAULT_FM_SP_bufferPrefixContent_passTimeStamp].
-+
-+                May be used for all ports
-+
-+ @Param[in]     ioc_fm_buffer_prefix_content_t  A structure holding the required parameters.
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Config() and before FM_PORT_Init().
-+*//***************************************************************************/
-+#define FM_PORT_IOC_CONFIG_BUFFER_PREFIX_CONTENT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(39), ioc_fm_buffer_prefix_content_t)
-+
-+#if (DPAA_VERSION >= 11)
-+typedef struct ioc_fm_port_vsp_alloc_params_t {
-+    uint8_t     num_of_profiles;          /**< Number of Virtual Storage Profiles */
-+    uint8_t     dflt_relative_id;         /**< The default Virtual-Storage-Profile-id dedicated to Rx/OP port
-+                                             The same default Virtual-Storage-Profile-id will be for coupled Tx port
-+                                             if relevant function called for Rx port */
-+    void    *p_fm_tx_port;             /**< Handle to coupled Tx Port; not relevant for OP port. */
-+}ioc_fm_port_vsp_alloc_params_t;
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_VSPAlloc
-+
-+ @Description   This routine allocated VSPs per port and forces the port to work
-+                in VSP mode. Note that the port is initialized by default with the
-+                physical-storage-profile only.
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[in]     p_Params    A structure of parameters for allocation VSP's per port
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init(), and before FM_PORT_SetPCD()
-+                and also before FM_PORT_Enable() (i.e. the port should be disabled).
-+*//***************************************************************************/
-+#if defined(CONFIG_COMPAT)
-+#define FM_PORT_IOC_VSP_ALLOC_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(38), ioc_compat_fm_port_vsp_alloc_params_t)
-+#endif
-+#define FM_PORT_IOC_VSP_ALLOC _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(38), ioc_fm_port_vsp_alloc_params_t)
-+#endif /* (DPAA_VERSION >= 11) */
-+
-+/**************************************************************************//**
-+ @Function      FM_PORT_GetBmiCounters
-+
-+ @Description   Read port's BMI stat counters and place them into
-+                a designated structure of counters.
-+
-+ @Param[in]     h_FmPort    A handle to a FM Port module.
-+ @Param[out]    p_BmiStats  counters structure
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_PORT_Init().
-+*//***************************************************************************/
-+
-+#define FM_PORT_IOC_GET_BMI_COUNTERS _IOR(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(42), ioc_fm_port_bmi_stats_t)
-+
-+
-+/** @} */ /* end of lnx_ioctl_FM_PORT_pcd_runtime_control_grp group */
-+/** @} */ /* end of lnx_ioctl_FM_PORT_runtime_control_grp group */
-+
-+/** @} */ /* end of lnx_ioctl_FM_PORT_grp group */
-+/** @} */ /* end of lnx_ioctl_FM_grp group */
-+#endif /* __FM_PORT_IOCTLS_H */
---- /dev/null
-+++ b/include/uapi/linux/fmd/Peripherals/fm_test_ioctls.h
-@@ -0,0 +1,208 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc.
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**************************************************************************//**
-+ @File          fm_test_ioctls.h
-+
-+ @Description   FM Char device ioctls
-+*//***************************************************************************/
-+#ifndef __FM_TEST_IOCTLS_H
-+#define __FM_TEST_IOCTLS_H
-+
-+#include "ioctls.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         lnx_ioctl_FMT_grp Frame Manager Test Linux IOCTL API
-+
-+ @Description   FM-Test Linux ioctls definitions and enums
-+
-+ @{
-+*//***************************************************************************/
-+
-+#define IOC_FMT_MAX_NUM_OF_PORTS        26
-+
-+/**************************************************************************//**
-+ @Collection    TEST Parameters
-+*//***************************************************************************/
-+/**************************************************************************//**
-+  @Description: Name of the FM-Test chardev
-+*//***************************************************************************/
-+#define DEV_FM_TEST_NAME                "fm-test-port"
-+
-+#define DEV_FM_TEST_PORTS_MINOR_BASE    0
-+#define DEV_FM_TEST_MAX_MINORS          (DEV_FM_TEST_PORTS_MINOR_BASE + IOC_FMT_MAX_NUM_OF_PORTS)
-+
-+#define FMT_PORT_IOC_NUM(n)             n
-+/* @} */
-+
-+/**************************************************************************//**
-+ @Group         lnx_ioctl_FMT_lib_grp FM-Test library
-+
-+ @Description   TODO
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   TODO
-+*//***************************************************************************/
-+typedef uint8_t ioc_fmt_xxx_t;
-+
-+#define FM_PRS_MAX 32
-+#define FM_TIME_STAMP_MAX 8
-+
-+/**************************************************************************//**
-+ @Description   FM Port buffer content description
-+*//***************************************************************************/
-+typedef struct ioc_fmt_buff_context_t {
-+    void            *p_user_priv;
-+    uint8_t         fm_prs_res[FM_PRS_MAX];
-+    uint8_t         fm_time_stamp[FM_TIME_STAMP_MAX];
-+} ioc_fmt_buff_context_t;
-+
-+#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
-+typedef struct ioc_fmt_compat_buff_context_t {
-+    compat_uptr_t         p_user_priv;
-+    uint8_t               fm_prs_res[FM_PRS_MAX];
-+    uint8_t               fm_time_stamp[FM_TIME_STAMP_MAX];
-+} ioc_fmt_compat_buff_context_t;
-+#endif
-+
-+/**************************************************************************//**
-+ @Description   Buffer descriptor
-+*//***************************************************************************/
-+typedef struct ioc_fmt_buff_desc_t {
-+    uint32_t               qid;
-+    void                   *p_data;
-+    uint32_t               size;
-+    uint32_t               status;
-+    ioc_fmt_buff_context_t buff_context;
-+} ioc_fmt_buff_desc_t;
-+
-+#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
-+typedef struct ioc_fmt_compat_buff_desc_t {
-+    uint32_t                qid;
-+    compat_uptr_t           p_data;
-+    uint32_t                size;
-+    uint32_t                status;
-+    ioc_fmt_compat_buff_context_t buff_context;
-+} ioc_fmt_compat_buff_desc_t;
-+#endif
-+
-+/**************************************************************************//**
-+ @Group         lnx_ioctl_FMT_runtime_control_grp FM-Test Runtime Control Unit
-+
-+ @Description   TODO
-+ @{
-+*//***************************************************************************/
-+
-+/** @} */ /* end of lnx_ioctl_FMT_runtime_control_grp group */
-+
-+
-+/**************************************************************************//**
-+ @Group         lnx_ioctl_FMTP_lib_grp FM-Port-Test library
-+
-+ @Description   TODO
-+
-+ @{
-+*//***************************************************************************/
-+
-+/**************************************************************************//**
-+ @Description   FM-Test FM port type
-+*//***************************************************************************/
-+typedef enum ioc_fmt_port_type {
-+    e_IOC_FMT_PORT_T_RXTX,  /**< Standard port */
-+    e_IOC_FMT_PORT_T_OP,    /**< Offline-parsing port */
-+} ioc_fmt_port_type;
-+
-+/**************************************************************************//**
-+ @Description   TODO
-+*//***************************************************************************/
-+typedef struct ioc_fmt_port_param_t {
-+    uint8_t             fm_id;
-+    ioc_fmt_port_type   fm_port_type;
-+    uint8_t             fm_port_id;
-+    uint32_t            num_tx_queues;
-+} ioc_fmt_port_param_t;
-+
-+
-+/**************************************************************************//**
-+ @Function      FMT_PORT_IOC_INIT
-+
-+ @Description   TODO
-+
-+ @Param[in]     ioc_fmt_port_param_t  TODO
-+
-+ @Cautions      Allowed only after the FM equivalent port is already initialized.
-+*//***************************************************************************/
-+#define FMT_PORT_IOC_INIT           _IOW(FMT_IOC_TYPE_BASE, FMT_PORT_IOC_NUM(0), ioc_fmt_port_param_t)
-+
-+/**************************************************************************//**
-+ @Function      FMT_PORT_IOC_SET_DIAG_MODE
-+
-+ @Description   TODO
-+
-+ @Param[in]     ioc_diag_mode  TODO
-+
-+ @Cautions      Allowed only following FMT_PORT_IOC_INIT().
-+*//***************************************************************************/
-+#define FMT_PORT_IOC_SET_DIAG_MODE  _IOW(FMT_IOC_TYPE_BASE, FMT_PORT_IOC_NUM(1), ioc_diag_mode)
-+
-+/**************************************************************************//**
-+ @Function      FMT_PORT_IOC_SET_IP_HEADER_MANIP
-+
-+ @Description   Set IP header manipulations for this port.
-+
-+ @Param[in]     int     1 to enable; 0 to disable
-+
-+ @Cautions      Allowed only following FMT_PORT_IOC_INIT().
-+*//***************************************************************************/
-+#define FMT_PORT_IOC_SET_IP_HEADER_MANIP  _IOW(FMT_IOC_TYPE_BASE, FMT_PORT_IOC_NUM(2), int)
-+
-+/**************************************************************************//**
-+ @Function      FMT_PORT_IOC_SET_DPAECHO_MODE
-+
-+ @Description   Set DPA in echo mode - all frame are sent back.
-+
-+ @Param[in]     int     1 to enable; 0 to disable
-+
-+ @Cautions      Allowed only following FMT_PORT_IOC_INIT().
-+*//***************************************************************************/
-+#define FMT_PORT_IOC_SET_DPAECHO_MODE     _IOW(FMT_IOC_TYPE_BASE, FMT_PORT_IOC_NUM(3), int)
-+
-+/** @} */ /* end of lnx_ioctl_FMTP_lib_grp group */
-+/** @} */ /* end of lnx_ioctl_FMT_lib_grp group */
-+/** @} */ /* end of lnx_ioctl_FMT_grp */
-+
-+
-+#endif /* __FM_TEST_IOCTLS_H */
---- /dev/null
-+++ b/include/uapi/linux/fmd/integrations/Kbuild
-@@ -0,0 +1 @@
-+header-y += integration_ioctls.h
---- /dev/null
-+++ b/include/uapi/linux/fmd/integrations/integration_ioctls.h
-@@ -0,0 +1,56 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc.
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**************************************************************************//**
-+ @File          integration_ioctls.h
-+
-+ @Description   External header file for Integration unit routines.
-+*//***************************************************************************/
-+
-+#ifndef __INTG_IOCTLS_H
-+#define __INTG_IOCTLS_H
-+
-+
-+#define FM_IOC_TYPE_BASE            (NCSW_IOC_TYPE_BASE+1)
-+#define FMT_IOC_TYPE_BASE           (NCSW_IOC_TYPE_BASE+3)
-+
-+/*#define FM_IOCTL_DBG*/
-+
-+#if defined(FM_IOCTL_DBG)
-+    #define _fm_ioctl_dbg(format, arg...) \
-+        printk("fm ioctl [%s:%u](cpu:%u) - " format, \
-+            __func__, __LINE__, smp_processor_id(), ##arg)
-+#else
-+#   define _fm_ioctl_dbg(arg...)
-+#endif
-+
-+#endif /* __INTG_IOCTLS_H */
---- /dev/null
-+++ b/include/uapi/linux/fmd/ioctls.h
-@@ -0,0 +1,96 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc.
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/**************************************************************************//**
-+ @File          ioctls.h
-+
-+ @Description   Structures and definitions for Command Relay Ioctls
-+*//***************************************************************************/
-+
-+#ifndef __IOCTLS_H__
-+#define __IOCTLS_H__
-+
-+#include <asm/ioctl.h>
-+
-+#include "integration_ioctls.h"
-+
-+
-+/**************************************************************************//**
-+ @Group         lnx_ioctl_ncsw_grp    NetCommSw Linux User-Space (IOCTL) API
-+ @{
-+*//***************************************************************************/
-+
-+#define NCSW_IOC_TYPE_BASE          0xe0    /**< defines the IOCTL type for all
-+                                                 the NCSW Linux module commands */
-+
-+
-+/**************************************************************************//**
-+ @Description   IOCTL Memory allocation types.
-+*//***************************************************************************/
-+typedef enum ioc_mem_type {
-+    e_IOC_MEM_INVALID      = 0x00000000,  /**< Invalid memory type (error) */
-+    e_IOC_MEM_CACHABLE_SYS = 0x00000001,  /**< Primary DDR, cacheable segment */
-+    e_IOC_MEM_NOCACHE_SYS  = 0x00000004,  /**< Primary DDR, non-cacheable segment */
-+    e_IOC_MEM_SECONDARY    = 0x00000002,  /**< Either secondary DDR or SDRAM */
-+    e_IOC_MEM_PRAM         = 0x00000008   /**< Multi-user RAM identifier */
-+} ioc_mem_type;
-+
-+/**************************************************************************//**
-+ @Description   Enumeration (bit flags) of communication modes (Transmit,
-+                receive or both).
-+*//***************************************************************************/
-+typedef enum ioc_comm_mode {
-+      e_IOC_COMM_MODE_NONE         = 0  /**< No transmit/receive communication */
-+    , e_IOC_COMM_MODE_RX           = 1  /**< Only receive communication */
-+    , e_IOC_COMM_MODE_TX           = 2  /**< Only transmit communication */
-+    , e_IOC_COMM_MODE_RX_AND_TX    = 3  /**< Both transmit and receive communication */
-+} ioc_comm_mode;
-+
-+/**************************************************************************//**
-+ @Description   General Diagnostic Mode
-+*//***************************************************************************/
-+typedef enum ioc_diag_mode
-+{
-+    e_IOC_DIAG_MODE_NONE = 0,
-+    e_IOC_DIAG_MODE_CTRL_LOOPBACK,      /**< loopback in the controller; E.g. MAC, TDM, etc. */
-+    e_IOC_DIAG_MODE_CHIP_LOOPBACK,      /**< loopback in the chip but not in controller;
-+                                         E.g. IO-pins, SerDes, etc. */
-+    e_IOC_DIAG_MODE_PHY_LOOPBACK,       /**< loopback in the external PHY */
-+    e_IOC_DIAG_MODE_LINE_LOOPBACK,      /**< loopback in the external line */
-+    e_IOC_DIAG_MODE_CTRL_ECHO,          /**< */
-+    e_IOC_DIAG_MODE_PHY_ECHO            /**< */
-+} ioc_diag_mode;
-+
-+/** @} */ /* end of lnx_ioctl_ncsw_grp */
-+
-+
-+#endif /* __IOCTLS_H__ */
---- /dev/null
-+++ b/include/uapi/linux/fmd/net_ioctls.h
-@@ -0,0 +1,430 @@
-+/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc.
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/**************************************************************************//**
-+ @File          net_ioctls.h
-+
-+ @Description   This file contains common and general netcomm headers definitions.
-+*//***************************************************************************/
-+#ifndef __NET_IOCTLS_H
-+#define __NET_IOCTLS_H
-+
-+#include "ioctls.h"
-+
-+
-+typedef uint8_t ioc_header_field_ppp_t;
-+
-+#define IOC_NET_HEADER_FIELD_PPP_PID                        (1)
-+#define IOC_NET_HEADER_FIELD_PPP_COMPRESSED                 (IOC_NET_HEADER_FIELD_PPP_PID << 1)
-+#define IOC_NET_HEADER_FIELD_PPP_ALL_FIELDS                 ((IOC_NET_HEADER_FIELD_PPP_PID << 2) - 1)
-+
-+
-+typedef uint8_t ioc_header_field_pppoe_t;
-+
-+#define IOC_NET_HEADER_FIELD_PPPoE_VER                      (1)
-+#define IOC_NET_HEADER_FIELD_PPPoE_TYPE                     (IOC_NET_HEADER_FIELD_PPPoE_VER << 1)
-+#define IOC_NET_HEADER_FIELD_PPPoE_CODE                     (IOC_NET_HEADER_FIELD_PPPoE_VER << 2)
-+#define IOC_NET_HEADER_FIELD_PPPoE_SID                      (IOC_NET_HEADER_FIELD_PPPoE_VER << 3)
-+#define IOC_NET_HEADER_FIELD_PPPoE_LEN                      (IOC_NET_HEADER_FIELD_PPPoE_VER << 4)
-+#define IOC_NET_HEADER_FIELD_PPPoE_SESSION                  (IOC_NET_HEADER_FIELD_PPPoE_VER << 5)
-+#define IOC_NET_HEADER_FIELD_PPPoE_PID                      (IOC_NET_HEADER_FIELD_PPPoE_VER << 6)
-+#define IOC_NET_HEADER_FIELD_PPPoE_ALL_FIELDS               ((IOC_NET_HEADER_FIELD_PPPoE_VER << 7) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_PPPMUX_PID                     (1)
-+#define IOC_NET_HEADER_FIELD_PPPMUX_CKSUM                   (IOC_NET_HEADER_FIELD_PPPMUX_PID << 1)
-+#define IOC_NET_HEADER_FIELD_PPPMUX_COMPRESSED              (IOC_NET_HEADER_FIELD_PPPMUX_PID << 2)
-+#define IOC_NET_HEADER_FIELD_PPPMUX_ALL_FIELDS              ((IOC_NET_HEADER_FIELD_PPPMUX_PID << 3) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_PPPMUX_SUBFRAME_PFF            (1)
-+#define IOC_NET_HEADER_FIELD_PPPMUX_SUBFRAME_LXT            (IOC_NET_HEADER_FIELD_PPPMUX_SUBFRAME_PFF << 1)
-+#define IOC_NET_HEADER_FIELD_PPPMUX_SUBFRAME_LEN            (IOC_NET_HEADER_FIELD_PPPMUX_SUBFRAME_PFF << 2)
-+#define IOC_NET_HEADER_FIELD_PPPMUX_SUBFRAME_PID            (IOC_NET_HEADER_FIELD_PPPMUX_SUBFRAME_PFF << 3)
-+#define IOC_NET_HEADER_FIELD_PPPMUX_SUBFRAME_USE_PID        (IOC_NET_HEADER_FIELD_PPPMUX_SUBFRAME_PFF << 4)
-+#define IOC_NET_HEADER_FIELD_PPPMUX_SUBFRAME_ALL_FIELDS     ((IOC_NET_HEADER_FIELD_PPPMUX_SUBFRAME_PFF << 5) - 1)
-+
-+
-+typedef uint8_t ioc_header_field_eth_t;
-+
-+#define IOC_NET_HEADER_FIELD_ETH_DA                         (1)
-+#define IOC_NET_HEADER_FIELD_ETH_SA                         (IOC_NET_HEADER_FIELD_ETH_DA << 1)
-+#define IOC_NET_HEADER_FIELD_ETH_LENGTH                     (IOC_NET_HEADER_FIELD_ETH_DA << 2)
-+#define IOC_NET_HEADER_FIELD_ETH_TYPE                       (IOC_NET_HEADER_FIELD_ETH_DA << 3)
-+#define IOC_NET_HEADER_FIELD_ETH_FINAL_CKSUM                (IOC_NET_HEADER_FIELD_ETH_DA << 4)
-+#define IOC_NET_HEADER_FIELD_ETH_PADDING                    (IOC_NET_HEADER_FIELD_ETH_DA << 5)
-+#define IOC_NET_HEADER_FIELD_ETH_ALL_FIELDS                 ((IOC_NET_HEADER_FIELD_ETH_DA << 6) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_ETH_ADDR_SIZE                 6
-+
-+typedef uint16_t ioc_header_field_ip_t;
-+
-+#define IOC_NET_HEADER_FIELD_IP_VER                         (1)
-+#define IOC_NET_HEADER_FIELD_IP_DSCP                        (IOC_NET_HEADER_FIELD_IP_VER << 2)
-+#define IOC_NET_HEADER_FIELD_IP_ECN                         (IOC_NET_HEADER_FIELD_IP_VER << 3)
-+#define IOC_NET_HEADER_FIELD_IP_PROTO                       (IOC_NET_HEADER_FIELD_IP_VER << 4)
-+
-+#define IOC_NET_HEADER_FIELD_IP_PROTO_SIZE                  1
-+
-+typedef uint16_t ioc_header_field_ipv4_t;
-+
-+#define IOC_NET_HEADER_FIELD_IPv4_VER                       (1)
-+#define IOC_NET_HEADER_FIELD_IPv4_HDR_LEN                   (IOC_NET_HEADER_FIELD_IPv4_VER << 1)
-+#define IOC_NET_HEADER_FIELD_IPv4_TOS                       (IOC_NET_HEADER_FIELD_IPv4_VER << 2)
-+#define IOC_NET_HEADER_FIELD_IPv4_TOTAL_LEN                 (IOC_NET_HEADER_FIELD_IPv4_VER << 3)
-+#define IOC_NET_HEADER_FIELD_IPv4_ID                        (IOC_NET_HEADER_FIELD_IPv4_VER << 4)
-+#define IOC_NET_HEADER_FIELD_IPv4_FLAG_D                    (IOC_NET_HEADER_FIELD_IPv4_VER << 5)
-+#define IOC_NET_HEADER_FIELD_IPv4_FLAG_M                    (IOC_NET_HEADER_FIELD_IPv4_VER << 6)
-+#define IOC_NET_HEADER_FIELD_IPv4_OFFSET                    (IOC_NET_HEADER_FIELD_IPv4_VER << 7)
-+#define IOC_NET_HEADER_FIELD_IPv4_TTL                       (IOC_NET_HEADER_FIELD_IPv4_VER << 8)
-+#define IOC_NET_HEADER_FIELD_IPv4_PROTO                     (IOC_NET_HEADER_FIELD_IPv4_VER << 9)
-+#define IOC_NET_HEADER_FIELD_IPv4_CKSUM                     (IOC_NET_HEADER_FIELD_IPv4_VER << 10)
-+#define IOC_NET_HEADER_FIELD_IPv4_SRC_IP                    (IOC_NET_HEADER_FIELD_IPv4_VER << 11)
-+#define IOC_NET_HEADER_FIELD_IPv4_DST_IP                    (IOC_NET_HEADER_FIELD_IPv4_VER << 12)
-+#define IOC_NET_HEADER_FIELD_IPv4_OPTS                      (IOC_NET_HEADER_FIELD_IPv4_VER << 13)
-+#define IOC_NET_HEADER_FIELD_IPv4_OPTS_COUNT                (IOC_NET_HEADER_FIELD_IPv4_VER << 14)
-+#define IOC_NET_HEADER_FIELD_IPv4_ALL_FIELDS                ((IOC_NET_HEADER_FIELD_IPv4_VER << 15) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_IPv4_ADDR_SIZE                 4
-+#define IOC_NET_HEADER_FIELD_IPv4_PROTO_SIZE                1
-+
-+
-+typedef uint8_t ioc_header_field_ipv6_t;
-+
-+#define IOC_NET_HEADER_FIELD_IPv6_VER                       (1)
-+#define IOC_NET_HEADER_FIELD_IPv6_TC                        (IOC_NET_HEADER_FIELD_IPv6_VER << 1)
-+#define IOC_NET_HEADER_FIELD_IPv6_SRC_IP                    (IOC_NET_HEADER_FIELD_IPv6_VER << 2)
-+#define IOC_NET_HEADER_FIELD_IPv6_DST_IP                    (IOC_NET_HEADER_FIELD_IPv6_VER << 3)
-+#define IOC_NET_HEADER_FIELD_IPv6_NEXT_HDR                  (IOC_NET_HEADER_FIELD_IPv6_VER << 4)
-+#define IOC_NET_HEADER_FIELD_IPv6_FL                        (IOC_NET_HEADER_FIELD_IPv6_VER << 5)
-+#define IOC_NET_HEADER_FIELD_IPv6_HOP_LIMIT                 (IOC_NET_HEADER_FIELD_IPv6_VER << 6)
-+#define IOC_NET_HEADER_FIELD_IPv6_ALL_FIELDS                ((IOC_NET_HEADER_FIELD_IPv6_VER << 7) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_IPv6_ADDR_SIZE                 16
-+#define IOC_NET_HEADER_FIELD_IPv6_NEXT_HDR_SIZE             1
-+
-+#define IOC_NET_HEADER_FIELD_ICMP_TYPE                      (1)
-+#define IOC_NET_HEADER_FIELD_ICMP_CODE                      (IOC_NET_HEADER_FIELD_ICMP_TYPE << 1)
-+#define IOC_NET_HEADER_FIELD_ICMP_CKSUM                     (IOC_NET_HEADER_FIELD_ICMP_TYPE << 2)
-+#define IOC_NET_HEADER_FIELD_ICMP_ID                        (IOC_NET_HEADER_FIELD_ICMP_TYPE << 3)
-+#define IOC_NET_HEADER_FIELD_ICMP_SQ_NUM                    (IOC_NET_HEADER_FIELD_ICMP_TYPE << 4)
-+#define IOC_NET_HEADER_FIELD_ICMP_ALL_FIELDS                ((IOC_NET_HEADER_FIELD_ICMP_TYPE << 5) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_ICMP_CODE_SIZE                 1
-+#define IOC_NET_HEADER_FIELD_ICMP_TYPE_SIZE                 1
-+
-+#define IOC_NET_HEADER_FIELD_IGMP_VERSION                   (1)
-+#define IOC_NET_HEADER_FIELD_IGMP_TYPE                      (IOC_NET_HEADER_FIELD_IGMP_VERSION << 1)
-+#define IOC_NET_HEADER_FIELD_IGMP_CKSUM                     (IOC_NET_HEADER_FIELD_IGMP_VERSION << 2)
-+#define IOC_NET_HEADER_FIELD_IGMP_DATA                      (IOC_NET_HEADER_FIELD_IGMP_VERSION << 3)
-+#define IOC_NET_HEADER_FIELD_IGMP_ALL_FIELDS                ((IOC_NET_HEADER_FIELD_IGMP_VERSION << 4) - 1)
-+
-+
-+typedef uint16_t ioc_header_field_tcp_t;
-+
-+#define IOC_NET_HEADER_FIELD_TCP_PORT_SRC                   (1)
-+#define IOC_NET_HEADER_FIELD_TCP_PORT_DST                   (IOC_NET_HEADER_FIELD_TCP_PORT_SRC << 1)
-+#define IOC_NET_HEADER_FIELD_TCP_SEQ                        (IOC_NET_HEADER_FIELD_TCP_PORT_SRC << 2)
-+#define IOC_NET_HEADER_FIELD_TCP_ACK                        (IOC_NET_HEADER_FIELD_TCP_PORT_SRC << 3)
-+#define IOC_NET_HEADER_FIELD_TCP_OFFSET                     (IOC_NET_HEADER_FIELD_TCP_PORT_SRC << 4)
-+#define IOC_NET_HEADER_FIELD_TCP_FLAGS                      (IOC_NET_HEADER_FIELD_TCP_PORT_SRC << 5)
-+#define IOC_NET_HEADER_FIELD_TCP_WINDOW                     (IOC_NET_HEADER_FIELD_TCP_PORT_SRC << 6)
-+#define IOC_NET_HEADER_FIELD_TCP_CKSUM                      (IOC_NET_HEADER_FIELD_TCP_PORT_SRC << 7)
-+#define IOC_NET_HEADER_FIELD_TCP_URGPTR                     (IOC_NET_HEADER_FIELD_TCP_PORT_SRC << 8)
-+#define IOC_NET_HEADER_FIELD_TCP_OPTS                       (IOC_NET_HEADER_FIELD_TCP_PORT_SRC << 9)
-+#define IOC_NET_HEADER_FIELD_TCP_OPTS_COUNT                 (IOC_NET_HEADER_FIELD_TCP_PORT_SRC << 10)
-+#define IOC_NET_HEADER_FIELD_TCP_ALL_FIELDS                 ((IOC_NET_HEADER_FIELD_TCP_PORT_SRC << 11) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_TCP_PORT_SIZE                  2
-+
-+
-+typedef uint8_t ioc_header_field_sctp_t;
-+
-+#define IOC_NET_HEADER_FIELD_SCTP_PORT_SRC                  (1)
-+#define IOC_NET_HEADER_FIELD_SCTP_PORT_DST                  (IOC_NET_HEADER_FIELD_SCTP_PORT_SRC << 1)
-+#define IOC_NET_HEADER_FIELD_SCTP_VER_TAG                   (IOC_NET_HEADER_FIELD_SCTP_PORT_SRC << 2)
-+#define IOC_NET_HEADER_FIELD_SCTP_CKSUM                     (IOC_NET_HEADER_FIELD_SCTP_PORT_SRC << 3)
-+#define IOC_NET_HEADER_FIELD_SCTP_ALL_FIELDS                ((IOC_NET_HEADER_FIELD_SCTP_PORT_SRC << 4) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_SCTP_PORT_SIZE                 2
-+
-+typedef uint8_t ioc_header_field_dccp_t;
-+
-+#define IOC_NET_HEADER_FIELD_DCCP_PORT_SRC                  (1)
-+#define IOC_NET_HEADER_FIELD_DCCP_PORT_DST                  (IOC_NET_HEADER_FIELD_DCCP_PORT_SRC << 1)
-+#define IOC_NET_HEADER_FIELD_DCCP_ALL_FIELDS                ((IOC_NET_HEADER_FIELD_DCCP_PORT_SRC << 2) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_DCCP_PORT_SIZE                 2
-+
-+
-+typedef uint8_t ioc_header_field_udp_t;
-+
-+#define IOC_NET_HEADER_FIELD_UDP_PORT_SRC                   (1)
-+#define IOC_NET_HEADER_FIELD_UDP_PORT_DST                   (IOC_NET_HEADER_FIELD_UDP_PORT_SRC << 1)
-+#define IOC_NET_HEADER_FIELD_UDP_LEN                        (IOC_NET_HEADER_FIELD_UDP_PORT_SRC << 2)
-+#define IOC_NET_HEADER_FIELD_UDP_CKSUM                      (IOC_NET_HEADER_FIELD_UDP_PORT_SRC << 3)
-+#define IOC_NET_HEADER_FIELD_UDP_ALL_FIELDS                 ((IOC_NET_HEADER_FIELD_UDP_PORT_SRC << 4) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_UDP_PORT_SIZE                  2
-+
-+typedef uint8_t ioc_header_field_udp_lite_t;
-+
-+#define IOC_NET_HEADER_FIELD_UDP_LITE_PORT_SRC              (1)
-+#define IOC_NET_HEADER_FIELD_UDP_LITE_PORT_DST              (IOC_NET_HEADER_FIELD_UDP_LITE_PORT_SRC << 1)
-+#define IOC_NET_HEADER_FIELD_UDP_LITE_ALL_FIELDS            ((IOC_NET_HEADER_FIELD_UDP_LITE_PORT_SRC << 2) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_UDP_LITE_PORT_SIZE             2
-+
-+typedef uint8_t ioc_header_field_udp_encap_esp_t;
-+
-+#define IOC_NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC         (1)
-+#define IOC_NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_DST         (IOC_NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC << 1)
-+#define IOC_NET_HEADER_FIELD_UDP_ENCAP_ESP_LEN              (IOC_NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC << 2)
-+#define IOC_NET_HEADER_FIELD_UDP_ENCAP_ESP_CKSUM            (IOC_NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC << 3)
-+#define IOC_NET_HEADER_FIELD_UDP_ENCAP_ESP_SPI              (IOC_NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC << 4)
-+#define IOC_NET_HEADER_FIELD_UDP_ENCAP_ESP_SEQUENCE_NUM     (IOC_NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC << 5)
-+#define IOC_NET_HEADER_FIELD_UDP_ENCAP_ESP_ALL_FIELDS       ((IOC_NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SRC << 6) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_UDP_ENCAP_ESP_PORT_SIZE        2
-+#define IOC_NET_HEADER_FIELD_UDP_ENCAP_ESP_SPI_SIZE         4
-+
-+#define IOC_NET_HEADER_FIELD_IPHC_CID                       (1)
-+#define IOC_NET_HEADER_FIELD_IPHC_CID_TYPE                  (IOC_NET_HEADER_FIELD_IPHC_CID << 1)
-+#define IOC_NET_HEADER_FIELD_IPHC_HCINDEX                   (IOC_NET_HEADER_FIELD_IPHC_CID << 2)
-+#define IOC_NET_HEADER_FIELD_IPHC_GEN                       (IOC_NET_HEADER_FIELD_IPHC_CID << 3)
-+#define IOC_NET_HEADER_FIELD_IPHC_D_BIT                     (IOC_NET_HEADER_FIELD_IPHC_CID << 4)
-+#define IOC_NET_HEADER_FIELD_IPHC_ALL_FIELDS                ((IOC_NET_HEADER_FIELD_IPHC_CID << 5) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE           (1)
-+#define IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_FLAGS          (IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 1)
-+#define IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_LENGTH         (IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 2)
-+#define IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_TSN            (IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 3)
-+#define IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_STREAM_ID      (IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 4)
-+#define IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_STREAM_SQN     (IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 5)
-+#define IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_PAYLOAD_PID    (IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 6)
-+#define IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_UNORDERED      (IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 7)
-+#define IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_BEGGINING      (IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 8)
-+#define IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_END            (IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 9)
-+#define IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_ALL_FIELDS     ((IOC_NET_HEADER_FIELD_SCTP_CHUNK_DATA_TYPE << 10) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_L2TPv2_TYPE_BIT                (1)
-+#define IOC_NET_HEADER_FIELD_L2TPv2_LENGTH_BIT              (IOC_NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 1)
-+#define IOC_NET_HEADER_FIELD_L2TPv2_SEQUENCE_BIT            (IOC_NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 2)
-+#define IOC_NET_HEADER_FIELD_L2TPv2_OFFSET_BIT              (IOC_NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 3)
-+#define IOC_NET_HEADER_FIELD_L2TPv2_PRIORITY_BIT            (IOC_NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 4)
-+#define IOC_NET_HEADER_FIELD_L2TPv2_VERSION                 (IOC_NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 5)
-+#define IOC_NET_HEADER_FIELD_L2TPv2_LEN                     (IOC_NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 6)
-+#define IOC_NET_HEADER_FIELD_L2TPv2_TUNNEL_ID               (IOC_NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 7)
-+#define IOC_NET_HEADER_FIELD_L2TPv2_SESSION_ID              (IOC_NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 8)
-+#define IOC_NET_HEADER_FIELD_L2TPv2_NS                      (IOC_NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 9)
-+#define IOC_NET_HEADER_FIELD_L2TPv2_NR                      (IOC_NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 10)
-+#define IOC_NET_HEADER_FIELD_L2TPv2_OFFSET_SIZE             (IOC_NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 11)
-+#define IOC_NET_HEADER_FIELD_L2TPv2_FIRST_BYTE              (IOC_NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 12)
-+#define IOC_NET_HEADER_FIELD_L2TPv2_ALL_FIELDS              ((IOC_NET_HEADER_FIELD_L2TPv2_TYPE_BIT << 13) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT           (1)
-+#define IOC_NET_HEADER_FIELD_L2TPv3_CTRL_LENGTH_BIT         (IOC_NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 1)
-+#define IOC_NET_HEADER_FIELD_L2TPv3_CTRL_SEQUENCE_BIT       (IOC_NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 2)
-+#define IOC_NET_HEADER_FIELD_L2TPv3_CTRL_VERSION            (IOC_NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 3)
-+#define IOC_NET_HEADER_FIELD_L2TPv3_CTRL_LENGTH             (IOC_NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 4)
-+#define IOC_NET_HEADER_FIELD_L2TPv3_CTRL_CONTROL            (IOC_NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 5)
-+#define IOC_NET_HEADER_FIELD_L2TPv3_CTRL_SENT               (IOC_NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 6)
-+#define IOC_NET_HEADER_FIELD_L2TPv3_CTRL_RECV               (IOC_NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 7)
-+#define IOC_NET_HEADER_FIELD_L2TPv3_CTRL_FIRST_BYTE         (IOC_NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 8)
-+#define IOC_NET_HEADER_FIELD_L2TPv3_CTRL_ALL_FIELDS         ((IOC_NET_HEADER_FIELD_L2TPv3_CTRL_TYPE_BIT << 9) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_L2TPv3_SESS_TYPE_BIT           (1)
-+#define IOC_NET_HEADER_FIELD_L2TPv3_SESS_VERSION            (IOC_NET_HEADER_FIELD_L2TPv3_SESS_TYPE_BIT << 1)
-+#define IOC_NET_HEADER_FIELD_L2TPv3_SESS_ID                 (IOC_NET_HEADER_FIELD_L2TPv3_SESS_TYPE_BIT << 2)
-+#define IOC_NET_HEADER_FIELD_L2TPv3_SESS_COOKIE             (IOC_NET_HEADER_FIELD_L2TPv3_SESS_TYPE_BIT << 3)
-+#define IOC_NET_HEADER_FIELD_L2TPv3_SESS_ALL_FIELDS         ((IOC_NET_HEADER_FIELD_L2TPv3_SESS_TYPE_BIT << 4) - 1)
-+
-+
-+typedef uint8_t ioc_header_field_vlan_t;
-+
-+#define IOC_NET_HEADER_FIELD_VLAN_VPRI                      (1)
-+#define IOC_NET_HEADER_FIELD_VLAN_CFI                       (IOC_NET_HEADER_FIELD_VLAN_VPRI << 1)
-+#define IOC_NET_HEADER_FIELD_VLAN_VID                       (IOC_NET_HEADER_FIELD_VLAN_VPRI << 2)
-+#define IOC_NET_HEADER_FIELD_VLAN_LENGTH                    (IOC_NET_HEADER_FIELD_VLAN_VPRI << 3)
-+#define IOC_NET_HEADER_FIELD_VLAN_TYPE                      (IOC_NET_HEADER_FIELD_VLAN_VPRI << 4)
-+#define IOC_NET_HEADER_FIELD_VLAN_ALL_FIELDS                ((IOC_NET_HEADER_FIELD_VLAN_VPRI << 5) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_VLAN_TCI                       (IOC_NET_HEADER_FIELD_VLAN_VPRI | \
-+                                                             IOC_NET_HEADER_FIELD_VLAN_CFI | \
-+                                                             IOC_NET_HEADER_FIELD_VLAN_VID)
-+
-+
-+typedef uint8_t ioc_header_field_llc_t;
-+
-+#define IOC_NET_HEADER_FIELD_LLC_DSAP                       (1)
-+#define IOC_NET_HEADER_FIELD_LLC_SSAP                       (IOC_NET_HEADER_FIELD_LLC_DSAP << 1)
-+#define IOC_NET_HEADER_FIELD_LLC_CTRL                       (IOC_NET_HEADER_FIELD_LLC_DSAP << 2)
-+#define IOC_NET_HEADER_FIELD_LLC_ALL_FIELDS                 ((IOC_NET_HEADER_FIELD_LLC_DSAP << 3) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_NLPID_NLPID                    (1)
-+#define IOC_NET_HEADER_FIELD_NLPID_ALL_FIELDS               ((IOC_NET_HEADER_FIELD_NLPID_NLPID << 1) - 1)
-+
-+
-+typedef uint8_t ioc_header_field_snap_t;
-+
-+#define IOC_NET_HEADER_FIELD_SNAP_OUI                       (1)
-+#define IOC_NET_HEADER_FIELD_SNAP_PID                       (IOC_NET_HEADER_FIELD_SNAP_OUI << 1)
-+#define IOC_NET_HEADER_FIELD_SNAP_ALL_FIELDS                ((IOC_NET_HEADER_FIELD_SNAP_OUI << 2) - 1)
-+
-+
-+typedef uint8_t ioc_header_field_llc_snap_t;
-+
-+#define IOC_NET_HEADER_FIELD_LLC_SNAP_TYPE                  (1)
-+#define IOC_NET_HEADER_FIELD_LLC_SNAP_ALL_FIELDS            ((IOC_NET_HEADER_FIELD_LLC_SNAP_TYPE << 1) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_ARP_HTYPE                      (1)
-+#define IOC_NET_HEADER_FIELD_ARP_PTYPE                      (IOC_NET_HEADER_FIELD_ARP_HTYPE << 1)
-+#define IOC_NET_HEADER_FIELD_ARP_HLEN                       (IOC_NET_HEADER_FIELD_ARP_HTYPE << 2)
-+#define IOC_NET_HEADER_FIELD_ARP_PLEN                       (IOC_NET_HEADER_FIELD_ARP_HTYPE << 3)
-+#define IOC_NET_HEADER_FIELD_ARP_OPER                       (IOC_NET_HEADER_FIELD_ARP_HTYPE << 4)
-+#define IOC_NET_HEADER_FIELD_ARP_SHA                        (IOC_NET_HEADER_FIELD_ARP_HTYPE << 5)
-+#define IOC_NET_HEADER_FIELD_ARP_SPA                        (IOC_NET_HEADER_FIELD_ARP_HTYPE << 6)
-+#define IOC_NET_HEADER_FIELD_ARP_THA                        (IOC_NET_HEADER_FIELD_ARP_HTYPE << 7)
-+#define IOC_NET_HEADER_FIELD_ARP_TPA                        (IOC_NET_HEADER_FIELD_ARP_HTYPE << 8)
-+#define IOC_NET_HEADER_FIELD_ARP_ALL_FIELDS                 ((IOC_NET_HEADER_FIELD_ARP_HTYPE << 9) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_RFC2684_LLC                    (1)
-+#define IOC_NET_HEADER_FIELD_RFC2684_NLPID                  (IOC_NET_HEADER_FIELD_RFC2684_LLC << 1)
-+#define IOC_NET_HEADER_FIELD_RFC2684_OUI                    (IOC_NET_HEADER_FIELD_RFC2684_LLC << 2)
-+#define IOC_NET_HEADER_FIELD_RFC2684_PID                    (IOC_NET_HEADER_FIELD_RFC2684_LLC << 3)
-+#define IOC_NET_HEADER_FIELD_RFC2684_VPN_OUI                (IOC_NET_HEADER_FIELD_RFC2684_LLC << 4)
-+#define IOC_NET_HEADER_FIELD_RFC2684_VPN_IDX                (IOC_NET_HEADER_FIELD_RFC2684_LLC << 5)
-+#define IOC_NET_HEADER_FIELD_RFC2684_ALL_FIELDS             ((IOC_NET_HEADER_FIELD_RFC2684_LLC << 6) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_USER_DEFINED_SRCPORT           (1)
-+#define IOC_NET_HEADER_FIELD_USER_DEFINED_PCDID             (IOC_NET_HEADER_FIELD_USER_DEFINED_SRCPORT << 1)
-+#define IOC_NET_HEADER_FIELD_USER_DEFINED_ALL_FIELDS        ((IOC_NET_HEADER_FIELD_USER_DEFINED_SRCPORT << 2) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_PAYLOAD_BUFFER                 (1)
-+#define IOC_NET_HEADER_FIELD_PAYLOAD_SIZE                   (IOC_NET_HEADER_FIELD_PAYLOAD_BUFFER << 1)
-+#define IOC_NET_HEADER_FIELD_MAX_FRM_SIZE                   (IOC_NET_HEADER_FIELD_PAYLOAD_BUFFER << 2)
-+#define IOC_NET_HEADER_FIELD_MIN_FRM_SIZE                   (IOC_NET_HEADER_FIELD_PAYLOAD_BUFFER << 3)
-+#define IOC_NET_HEADER_FIELD_PAYLOAD_TYPE                   (IOC_NET_HEADER_FIELD_PAYLOAD_BUFFER << 4)
-+#define IOC_NET_HEADER_FIELD_FRAME_SIZE                     (IOC_NET_HEADER_FIELD_PAYLOAD_BUFFER << 5)
-+#define IOC_NET_HEADER_FIELD_PAYLOAD_ALL_FIELDS             ((IOC_NET_HEADER_FIELD_PAYLOAD_BUFFER << 6) - 1)
-+
-+
-+typedef uint8_t ioc_header_field_gre_t;
-+
-+#define IOC_NET_HEADER_FIELD_GRE_TYPE                       (1)
-+#define IOC_NET_HEADER_FIELD_GRE_ALL_FIELDS                 ((IOC_NET_HEADER_FIELD_GRE_TYPE << 1) - 1)
-+
-+
-+typedef uint8_t ioc_header_field_minencap_t;
-+
-+#define IOC_NET_HEADER_FIELD_MINENCAP_SRC_IP                (1)
-+#define IOC_NET_HEADER_FIELD_MINENCAP_DST_IP                (IOC_NET_HEADER_FIELD_MINENCAP_SRC_IP << 1)
-+#define IOC_NET_HEADER_FIELD_MINENCAP_TYPE                  (IOC_NET_HEADER_FIELD_MINENCAP_SRC_IP << 2)
-+#define IOC_NET_HEADER_FIELD_MINENCAP_ALL_FIELDS            ((IOC_NET_HEADER_FIELD_MINENCAP_SRC_IP << 3) - 1)
-+
-+
-+typedef uint8_t ioc_header_field_ipsec_ah_t;
-+
-+#define IOC_NET_HEADER_FIELD_IPSEC_AH_SPI                   (1)
-+#define IOC_NET_HEADER_FIELD_IPSEC_AH_NH                    (IOC_NET_HEADER_FIELD_IPSEC_AH_SPI << 1)
-+#define IOC_NET_HEADER_FIELD_IPSEC_AH_ALL_FIELDS            ((IOC_NET_HEADER_FIELD_IPSEC_AH_SPI << 2) - 1)
-+
-+
-+typedef uint8_t ioc_header_field_ipsec_esp_t;
-+
-+#define IOC_NET_HEADER_FIELD_IPSEC_ESP_SPI                  (1)
-+#define IOC_NET_HEADER_FIELD_IPSEC_ESP_SEQUENCE_NUM         (IOC_NET_HEADER_FIELD_IPSEC_ESP_SPI << 1)
-+#define IOC_NET_HEADER_FIELD_IPSEC_ESP_ALL_FIELDS           ((IOC_NET_HEADER_FIELD_IPSEC_ESP_SPI << 2) - 1)
-+
-+#define IOC_NET_HEADER_FIELD_IPSEC_ESP_SPI_SIZE             4
-+
-+
-+typedef uint8_t ioc_header_field_mpls_t;
-+
-+#define IOC_NET_HEADER_FIELD_MPLS_LABEL_STACK               (1)
-+#define IOC_NET_HEADER_FIELD_MPLS_LABEL_STACK_ALL_FIELDS    ((IOC_NET_HEADER_FIELD_MPLS_LABEL_STACK << 1) - 1)
-+
-+
-+typedef uint8_t ioc_header_field_macsec_t;
-+
-+#define IOC_NET_HEADER_FIELD_MACSEC_SECTAG                  (1)
-+#define IOC_NET_HEADER_FIELD_MACSEC_ALL_FIELDS              ((IOC_NET_HEADER_FIELD_MACSEC_SECTAG << 1) - 1)
-+
-+
-+typedef enum {
-+    e_IOC_NET_HEADER_TYPE_NONE = 0,
-+    e_IOC_NET_HEADER_TYPE_PAYLOAD,
-+    e_IOC_NET_HEADER_TYPE_ETH,
-+    e_IOC_NET_HEADER_TYPE_VLAN,
-+    e_IOC_NET_HEADER_TYPE_IPv4,
-+    e_IOC_NET_HEADER_TYPE_IPv6,
-+    e_IOC_NET_HEADER_TYPE_IP,
-+    e_IOC_NET_HEADER_TYPE_TCP,
-+    e_IOC_NET_HEADER_TYPE_UDP,
-+    e_IOC_NET_HEADER_TYPE_UDP_LITE,
-+    e_IOC_NET_HEADER_TYPE_IPHC,
-+    e_IOC_NET_HEADER_TYPE_SCTP,
-+    e_IOC_NET_HEADER_TYPE_SCTP_CHUNK_DATA,
-+    e_IOC_NET_HEADER_TYPE_PPPoE,
-+    e_IOC_NET_HEADER_TYPE_PPP,
-+    e_IOC_NET_HEADER_TYPE_PPPMUX,
-+    e_IOC_NET_HEADER_TYPE_PPPMUX_SUBFRAME,
-+    e_IOC_NET_HEADER_TYPE_L2TPv2,
-+    e_IOC_NET_HEADER_TYPE_L2TPv3_CTRL,
-+    e_IOC_NET_HEADER_TYPE_L2TPv3_SESS,
-+    e_IOC_NET_HEADER_TYPE_LLC,
-+    e_IOC_NET_HEADER_TYPE_LLC_SNAP,
-+    e_IOC_NET_HEADER_TYPE_NLPID,
-+    e_IOC_NET_HEADER_TYPE_SNAP,
-+    e_IOC_NET_HEADER_TYPE_MPLS,
-+    e_IOC_NET_HEADER_TYPE_IPSEC_AH,
-+    e_IOC_NET_HEADER_TYPE_IPSEC_ESP,
-+    e_IOC_NET_HEADER_TYPE_UDP_ENCAP_ESP, /* RFC 3948 */
-+    e_IOC_NET_HEADER_TYPE_MACSEC,
-+    e_IOC_NET_HEADER_TYPE_GRE,
-+    e_IOC_NET_HEADER_TYPE_MINENCAP,
-+    e_IOC_NET_HEADER_TYPE_DCCP,
-+    e_IOC_NET_HEADER_TYPE_ICMP,
-+    e_IOC_NET_HEADER_TYPE_IGMP,
-+    e_IOC_NET_HEADER_TYPE_ARP,
-+    e_IOC_NET_HEADER_TYPE_CAPWAP,
-+    e_IOC_NET_HEADER_TYPE_CAPWAP_DTLS,
-+    e_IOC_NET_HEADER_TYPE_RFC2684,
-+    e_IOC_NET_HEADER_TYPE_USER_DEFINED_L2,
-+    e_IOC_NET_HEADER_TYPE_USER_DEFINED_L3,
-+    e_IOC_NET_HEADER_TYPE_USER_DEFINED_L4,
-+    e_IOC_NET_HEADER_TYPE_USER_DEFINED_SHIM1,
-+    e_IOC_NET_HEADER_TYPE_USER_DEFINED_SHIM2,
-+    e_IOC_NET_MAX_HEADER_TYPE_COUNT
-+} ioc_net_header_type;
-+
-+
-+#endif /* __NET_IOCTLS_H */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0009-dpa-SDK-DPAA-1.x-Ethernet-driver.patch b/target/linux/layerscape/patches-5.4/701-net-0009-dpa-SDK-DPAA-1.x-Ethernet-driver.patch
deleted file mode 100644
index 8dbcb0654f..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0009-dpa-SDK-DPAA-1.x-Ethernet-driver.patch
+++ /dev/null
@@ -1,12966 +0,0 @@
-From f7f94b1e7e9c6044a23bab1c5e773f6259f2d3e0 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Wed, 10 May 2017 16:39:42 +0300
-Subject: [PATCH] dpa: SDK DPAA 1.x Ethernet driver
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/Kconfig    |  173 ++
- drivers/net/ethernet/freescale/sdk_dpaa/Makefile   |   46 +
- .../net/ethernet/freescale/sdk_dpaa/dpaa_1588.c    |  580 ++++++
- .../net/ethernet/freescale/sdk_dpaa/dpaa_1588.h    |  138 ++
- .../net/ethernet/freescale/sdk_dpaa/dpaa_debugfs.c |  180 ++
- .../net/ethernet/freescale/sdk_dpaa/dpaa_debugfs.h |   43 +
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c | 1210 ++++++++++++
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h |  697 +++++++
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_base.c    |  263 +++
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_base.h    |   50 +
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c   | 1991 ++++++++++++++++++++
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h   |  236 +++
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_common.c  | 1812 ++++++++++++++++++
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_common.h  |  226 +++
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_proxy.c   |  381 ++++
- .../net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c  | 1113 +++++++++++
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_sysfs.c   |  278 +++
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_trace.h   |  144 ++
- .../net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c |  544 ++++++
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ptp.c |  290 +++
- drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c  |  909 +++++++++
- drivers/net/ethernet/freescale/sdk_dpaa/mac.c      |  489 +++++
- drivers/net/ethernet/freescale/sdk_dpaa/mac.h      |  135 ++
- .../net/ethernet/freescale/sdk_dpaa/offline_port.c |  848 +++++++++
- .../net/ethernet/freescale/sdk_dpaa/offline_port.h |   59 +
- 25 files changed, 12835 insertions(+)
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/Kconfig
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/Makefile
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_1588.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_1588.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_debugfs.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_debugfs.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_base.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_base.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_proxy.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sysfs.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_trace.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ptp.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/mac.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/mac.h
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/offline_port.c
- create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/offline_port.h
-
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/Kconfig
-@@ -0,0 +1,173 @@
-+menuconfig FSL_SDK_DPAA_ETH
-+	tristate "DPAA Ethernet"
-+	depends on (FSL_SOC || ARM64 || ARM) && FSL_SDK_BMAN && FSL_SDK_QMAN && FSL_SDK_FMAN && !FSL_DPAA_ETH
-+	select PHYLIB
-+	help
-+	  Data Path Acceleration Architecture Ethernet driver,
-+	  supporting the Freescale QorIQ chips.
-+	  Depends on Freescale Buffer Manager and Queue Manager
-+	  driver and Frame Manager Driver.
-+
-+if FSL_SDK_DPAA_ETH
-+
-+config FSL_DPAA_HOOKS
-+	bool "DPAA Ethernet driver hooks"
-+
-+config FSL_DPAA_CEETM
-+	bool "DPAA CEETM QoS"
-+	depends on NET_SCHED
-+	default n
-+	help
-+	Enable QoS offloading support through the CEETM hardware block.
-+
-+config FSL_DPAA_OFFLINE_PORTS
-+	bool "Offline Ports support"
-+	depends on FSL_SDK_DPAA_ETH
-+	default y
-+	help
-+	  The Offline Parsing / Host Command ports (short: OH ports, of Offline ports) provide
-+	  most of the functionality of the regular, online ports, except they receive their
-+	  frames from a core or an accelerator on the SoC, via QMan frame queues,
-+	  rather than directly from the network.
-+	  Offline ports are configured via PCD (Parse-Classify-Distribute) schemes, just like
-+	  any online FMan port. They deliver the processed frames to frame queues, according
-+	  to the applied PCD configurations.
-+
-+	  Choosing this feature will not impact the functionality and/or performance of the system,
-+	  so it is safe to have it.
-+
-+config FSL_DPAA_ADVANCED_DRIVERS
-+        bool "Advanced DPAA Ethernet drivers"
-+        depends on FSL_SDK_DPAA_ETH
-+        default y
-+        help
-+	  Besides the standard DPAA Ethernet driver the DPAA Proxy initialization driver
-+	  is needed to support advanced scenarios. Select this to also build the advanced
-+	  drivers.
-+
-+config FSL_DPAA_ETH_JUMBO_FRAME
-+	bool "Optimize for jumbo frames"
-+	default n
-+	help
-+	  Optimize the DPAA Ethernet driver throughput for large frames
-+	  termination traffic (e.g. 4K and above).
-+	  NOTE: This option can only be used if FSL_FM_MAX_FRAME_SIZE
-+	  is set to 9600 bytes.
-+	  Using this option in combination with small frames increases
-+	  significantly the driver's memory footprint and may even deplete
-+	  the system memory. Also, the skb truesize is altered and messages
-+	  from the stack that warn against this are bypassed.
-+	  This option is not available on LS1043.
-+
-+config FSL_DPAA_TS
-+	bool "Linux compliant timestamping"
-+	depends on FSL_SDK_DPAA_ETH
-+	default n
-+	help
-+	  Enable Linux API compliant timestamping support.
-+
-+config FSL_DPAA_1588
-+        bool "IEEE 1588-compliant timestamping"
-+        depends on FSL_SDK_DPAA_ETH
-+        select FSL_DPAA_TS
-+        default n
-+        help
-+         Enable IEEE1588 support code.
-+
-+config FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
-+	bool "Use driver's Tx queue selection mechanism"
-+	default y
-+	depends on FSL_SDK_DPAA_ETH
-+	help
-+	  The DPAA-Ethernet driver defines a ndo_select_queue() callback for optimal selection
-+	  of the egress FQ. That will override the XPS support for this netdevice.
-+	  If for whatever reason you want to be in control of the egress FQ-to-CPU selection and mapping,
-+	  or simply don't want to use the driver's ndo_select_queue() callback, then unselect this
-+	  and use the standard XPS support instead.
-+
-+config FSL_DPAA_ETH_MAX_BUF_COUNT
-+	int "Maximum nuber of buffers in private bpool"
-+	depends on FSL_SDK_DPAA_ETH
-+	range 64 2048
-+	default "128"
-+	help
-+	  The maximum number of buffers to be by default allocated in the DPAA-Ethernet private port's
-+	  buffer pool. One needn't normally modify this, as it has probably been tuned for performance
-+	  already. This cannot be lower than DPAA_ETH_REFILL_THRESHOLD.
-+
-+config FSL_DPAA_ETH_REFILL_THRESHOLD
-+	int "Private bpool refill threshold"
-+	depends on FSL_SDK_DPAA_ETH
-+	range 32 FSL_DPAA_ETH_MAX_BUF_COUNT
-+	default "80"
-+	help
-+	  The DPAA-Ethernet driver will start replenishing buffer pools whose count
-+	  falls below this threshold. This must be related to DPAA_ETH_MAX_BUF_COUNT. One needn't normally
-+	  modify this value unless one has very specific performance reasons.
-+
-+config FSL_DPAA_CS_THRESHOLD_1G
-+	hex "Egress congestion threshold on 1G ports"
-+	depends on FSL_SDK_DPAA_ETH
-+	range 0x1000 0x10000000
-+	default "0x06000000"
-+	help
-+	  The size in bytes of the egress Congestion State notification threshold on 1G ports.
-+	  The 1G dTSECs can quite easily be flooded by cores doing Tx in a tight loop
-+	  (e.g. by sending UDP datagrams at "while(1) speed"),
-+	  and the larger the frame size, the more acute the problem.
-+	  So we have to find a balance between these factors:
-+	       - avoiding the device staying congested for a prolonged time (risking
-+                 the netdev watchdog to fire - see also the tx_timeout module param);
-+               - affecting performance of protocols such as TCP, which otherwise
-+	         behave well under the congestion notification mechanism;
-+	       - preventing the Tx cores from tightly-looping (as if the congestion
-+	         threshold was too low to be effective);
-+	       - running out of memory if the CS threshold is set too high.
-+
-+config FSL_DPAA_CS_THRESHOLD_10G
-+	hex "Egress congestion threshold on 10G ports"
-+	depends on FSL_SDK_DPAA_ETH
-+	range 0x1000 0x20000000
-+	default "0x10000000"
-+	help
-+	  The size in bytes of the egress Congestion State notification threshold on 10G ports.
-+
-+config FSL_DPAA_INGRESS_CS_THRESHOLD
-+	hex "Ingress congestion threshold on FMan ports"
-+	depends on FSL_SDK_DPAA_ETH
-+	default "0x10000000"
-+	help
-+	  The size in bytes of the ingress tail-drop threshold on FMan ports.
-+	  Traffic piling up above this value will be rejected by QMan and discarded by FMan.
-+
-+config FSL_DPAA_ETH_DEBUGFS
-+	bool "DPAA Ethernet debugfs interface"
-+	depends on DEBUG_FS && FSL_SDK_DPAA_ETH
-+	default y
-+	help
-+	  This option compiles debugfs code for the DPAA Ethernet driver.
-+
-+config FSL_DPAA_ETH_DEBUG
-+	bool "DPAA Ethernet Debug Support"
-+	depends on FSL_SDK_DPAA_ETH
-+	default n
-+	help
-+	  This option compiles debug code for the DPAA Ethernet driver.
-+
-+config FSL_DPAA_DBG_LOOP
-+	bool "DPAA Ethernet Debug loopback"
-+	depends on FSL_DPAA_ETH_DEBUGFS && FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
-+	default n
-+	help
-+	  This option allows to divert all received traffic on a certain interface A towards a
-+	  selected interface B. This option is used to benchmark the HW + Ethernet driver in
-+	  isolation from the Linux networking stack. The loops are controlled by debugfs entries,
-+	  one for each interface. By default all loops are disabled (target value is -1). I.e. to
-+	  change the loop setting for interface 4 and divert all received traffic to interface 5
-+	  write Tx interface number in the receive interface debugfs file:
-+		# cat /sys/kernel/debug/powerpc/fsl_dpa/eth4_loop
-+			4->-1
-+		# echo 5 > /sys/kernel/debug/powerpc/fsl_dpa/eth4_loop
-+		# cat /sys/kernel/debug/powerpc/fsl_dpa/eth4_loop
-+			4->5
-+endif # FSL_SDK_DPAA_ETH
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/Makefile
-@@ -0,0 +1,46 @@
-+#
-+# Makefile for the Freescale Ethernet controllers
-+#
-+ccflags-y += -DVERSION=\"\"
-+#
-+# Include netcomm SW specific definitions
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+
-+ccflags-y += -I$(NET_DPA)
-+
-+obj-$(CONFIG_FSL_SDK_DPAA_ETH) += fsl_mac.o fsl_dpa.o
-+obj-$(CONFIG_PTP_1588_CLOCK_DPAA) += dpaa_ptp.o
-+
-+fsl_dpa-objs += dpaa_ethtool.o dpaa_eth_sysfs.o dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o
-+ifeq ($(CONFIG_FSL_DPAA_DBG_LOOP),y)
-+fsl_dpa-objs += dpaa_debugfs.o
-+endif
-+ifeq ($(CONFIG_FSL_DPAA_1588),y)
-+fsl_dpa-objs += dpaa_1588.o
-+endif
-+ifeq ($(CONFIG_FSL_DPAA_CEETM),y)
-+ccflags-y += -Idrivers/net/ethernet/freescale/sdk_fman/src/wrapper
-+fsl_dpa-objs += dpaa_eth_ceetm.o
-+endif
-+
-+fsl_mac-objs += mac.o mac-api.o
-+
-+# Advanced drivers
-+ifeq ($(CONFIG_FSL_DPAA_ADVANCED_DRIVERS),y)
-+obj-$(CONFIG_FSL_SDK_DPAA_ETH) += fsl_advanced.o
-+obj-$(CONFIG_FSL_SDK_DPAA_ETH) += fsl_proxy.o
-+
-+fsl_advanced-objs += dpaa_eth_base.o
-+# suport for multiple drivers per kernel module comes in kernel 3.14
-+# so we are forced to generate several modules for the advanced drivers
-+fsl_proxy-objs += dpaa_eth_proxy.o
-+
-+ifeq ($(CONFIG_FSL_DPAA_OFFLINE_PORTS),y)
-+obj-$(CONFIG_FSL_SDK_DPAA_ETH) += fsl_oh.o
-+
-+fsl_oh-objs += offline_port.o
-+endif
-+endif
-+
-+# Needed by the tracing framework
-+CFLAGS_dpaa_eth.o := -I$(src)
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_1588.c
-@@ -0,0 +1,580 @@
-+/* Copyright (C) 2011 Freescale Semiconductor, Inc.
-+ * Copyright (C) 2009 IXXAT Automation, GmbH
-+ *
-+ * DPAA Ethernet Driver -- IEEE 1588 interface functionality
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-+ *
-+ */
-+#include <linux/io.h>
-+#include <linux/device.h>
-+#include <linux/fs.h>
-+#include <linux/vmalloc.h>
-+#include <linux/spinlock.h>
-+#include <linux/ip.h>
-+#include <linux/ipv6.h>
-+#include <linux/udp.h>
-+#include <asm/div64.h>
-+#include "dpaa_eth.h"
-+#include "dpaa_eth_common.h"
-+#include "dpaa_1588.h"
-+#include "mac.h"
-+
-+static int dpa_ptp_init_circ(struct dpa_ptp_circ_buf *ptp_buf, u32 size)
-+{
-+	struct circ_buf *circ_buf = &ptp_buf->circ_buf;
-+
-+	circ_buf->buf = vmalloc(sizeof(struct dpa_ptp_data) * size);
-+	if (!circ_buf->buf)
-+		return 1;
-+
-+	circ_buf->head = 0;
-+	circ_buf->tail = 0;
-+	ptp_buf->size = size;
-+	spin_lock_init(&ptp_buf->ptp_lock);
-+
-+	return 0;
-+}
-+
-+static void dpa_ptp_reset_circ(struct dpa_ptp_circ_buf *ptp_buf, u32 size)
-+{
-+	struct circ_buf *circ_buf = &ptp_buf->circ_buf;
-+
-+	circ_buf->head = 0;
-+	circ_buf->tail = 0;
-+	ptp_buf->size = size;
-+}
-+
-+static int dpa_ptp_insert(struct dpa_ptp_circ_buf *ptp_buf,
-+			  struct dpa_ptp_data *data)
-+{
-+	struct circ_buf *circ_buf = &ptp_buf->circ_buf;
-+	int size = ptp_buf->size;
-+	struct dpa_ptp_data *tmp;
-+	unsigned long flags;
-+	int head, tail;
-+
-+	spin_lock_irqsave(&ptp_buf->ptp_lock, flags);
-+
-+	head = circ_buf->head;
-+	tail = circ_buf->tail;
-+
-+	if (CIRC_SPACE(head, tail, size) <= 0)
-+		circ_buf->tail = (tail + 1) & (size - 1);
-+
-+	tmp = (struct dpa_ptp_data *)(circ_buf->buf) + head;
-+	memcpy(tmp, data, sizeof(struct dpa_ptp_data));
-+
-+	circ_buf->head = (head + 1) & (size - 1);
-+
-+	spin_unlock_irqrestore(&ptp_buf->ptp_lock, flags);
-+
-+	return 0;
-+}
-+
-+static int dpa_ptp_is_ident_match(struct dpa_ptp_ident *dst,
-+				  struct dpa_ptp_ident *src)
-+{
-+	int ret;
-+
-+	if ((dst->version != src->version) || (dst->msg_type != src->msg_type))
-+		return 0;
-+
-+	if ((dst->netw_prot == src->netw_prot)
-+			|| src->netw_prot == DPA_PTP_PROT_DONTCARE) {
-+		if (dst->seq_id != src->seq_id)
-+			return 0;
-+
-+		ret = memcmp(dst->snd_port_id, src->snd_port_id,
-+				DPA_PTP_SOURCE_PORT_LENGTH);
-+		if (ret)
-+			return 0;
-+		else
-+			return 1;
-+	}
-+
-+	return 0;
-+}
-+
-+static int dpa_ptp_find_and_remove(struct dpa_ptp_circ_buf *ptp_buf,
-+				   struct dpa_ptp_ident *ident,
-+				   struct dpa_ptp_time *ts)
-+{
-+	struct circ_buf *circ_buf = &ptp_buf->circ_buf;
-+	int size = ptp_buf->size;
-+	int head, tail, idx;
-+	unsigned long flags;
-+	struct dpa_ptp_data *tmp, *tmp2;
-+	struct dpa_ptp_ident *tmp_ident;
-+
-+	spin_lock_irqsave(&ptp_buf->ptp_lock, flags);
-+
-+	head = circ_buf->head;
-+	tail = idx = circ_buf->tail;
-+
-+	if (CIRC_CNT(head, tail, size) == 0) {
-+		spin_unlock_irqrestore(&ptp_buf->ptp_lock, flags);
-+		return 1;
-+	}
-+
-+	while (idx != head) {
-+		tmp = (struct dpa_ptp_data *)(circ_buf->buf) + idx;
-+		tmp_ident = &tmp->ident;
-+		if (dpa_ptp_is_ident_match(tmp_ident, ident))
-+			break;
-+		idx = (idx + 1) & (size - 1);
-+	}
-+
-+	if (idx == head) {
-+		spin_unlock_irqrestore(&ptp_buf->ptp_lock, flags);
-+		return 1;
-+	}
-+
-+	ts->sec = tmp->ts.sec;
-+	ts->nsec = tmp->ts.nsec;
-+
-+	if (idx != tail) {
-+		if (CIRC_CNT(idx, tail, size) > TS_ACCUMULATION_THRESHOLD) {
-+			tail = circ_buf->tail =
-+				(idx - TS_ACCUMULATION_THRESHOLD) & (size - 1);
-+		}
-+
-+		while (CIRC_CNT(idx, tail, size) > 0) {
-+			tmp = (struct dpa_ptp_data *)(circ_buf->buf) + idx;
-+			idx = (idx - 1) & (size - 1);
-+			tmp2 = (struct dpa_ptp_data *)(circ_buf->buf) + idx;
-+			*tmp = *tmp2;
-+		}
-+	}
-+	circ_buf->tail = (tail + 1) & (size - 1);
-+
-+	spin_unlock_irqrestore(&ptp_buf->ptp_lock, flags);
-+
-+	return 0;
-+}
-+
-+/* Parse the PTP packets
-+ *
-+ * The PTP header can be found in an IPv4 packet, IPv6 patcket or in
-+ * an IEEE802.3 ethernet frame. This function returns the position of
-+ * the PTP packet or NULL if no PTP found
-+ */
-+static u8 *dpa_ptp_parse_packet(struct sk_buff *skb, u16 *eth_type)
-+{
-+	u8 *pos = skb->data + ETH_ALEN + ETH_ALEN;
-+	u8 *ptp_loc = NULL;
-+	u8 msg_type;
-+	u32 access_len = ETH_ALEN + ETH_ALEN + DPA_ETYPE_LEN;
-+	struct iphdr *iph;
-+	struct udphdr *udph;
-+	struct ipv6hdr *ipv6h;
-+
-+	/* when we can receive S/G frames we need to check the data we want to
-+	 * access is in the linear skb buffer
-+	 */
-+	if (!pskb_may_pull(skb, access_len))
-+		return NULL;
-+
-+	*eth_type = *((u16 *)pos);
-+
-+	/* Check if inner tag is here */
-+	if (*eth_type == ETH_P_8021Q) {
-+		access_len += DPA_VLAN_TAG_LEN;
-+
-+		if (!pskb_may_pull(skb, access_len))
-+			return NULL;
-+
-+		pos += DPA_VLAN_TAG_LEN;
-+		*eth_type = *((u16 *)pos);
-+	}
-+
-+	pos += DPA_ETYPE_LEN;
-+
-+	switch (*eth_type) {
-+	/* Transport of PTP over Ethernet */
-+	case ETH_P_1588:
-+		ptp_loc = pos;
-+
-+		if (!pskb_may_pull(skb, access_len + PTP_OFFS_MSG_TYPE + 1))
-+			return NULL;
-+
-+		msg_type = *((u8 *)(ptp_loc + PTP_OFFS_MSG_TYPE)) & 0xf;
-+		if ((msg_type == PTP_MSGTYPE_SYNC)
-+			|| (msg_type == PTP_MSGTYPE_DELREQ)
-+			|| (msg_type == PTP_MSGTYPE_PDELREQ)
-+			|| (msg_type == PTP_MSGTYPE_PDELRESP))
-+				return ptp_loc;
-+		break;
-+	/* Transport of PTP over IPv4 */
-+	case ETH_P_IP:
-+		iph = (struct iphdr *)pos;
-+		access_len += sizeof(struct iphdr);
-+
-+		if (!pskb_may_pull(skb, access_len))
-+			return NULL;
-+
-+		if (ntohs(iph->protocol) != IPPROTO_UDP)
-+			return NULL;
-+
-+		access_len += iph->ihl * 4 - sizeof(struct iphdr) +
-+				sizeof(struct udphdr);
-+
-+		if (!pskb_may_pull(skb, access_len))
-+			return NULL;
-+
-+		pos += iph->ihl * 4;
-+		udph = (struct udphdr *)pos;
-+		if (ntohs(udph->dest) != 319)
-+			return NULL;
-+		ptp_loc = pos + sizeof(struct udphdr);
-+		break;
-+	/* Transport of PTP over IPv6 */
-+	case ETH_P_IPV6:
-+		ipv6h = (struct ipv6hdr *)pos;
-+
-+		access_len += sizeof(struct ipv6hdr) + sizeof(struct udphdr);
-+
-+		if (ntohs(ipv6h->nexthdr) != IPPROTO_UDP)
-+			return NULL;
-+
-+		pos += sizeof(struct ipv6hdr);
-+		udph = (struct udphdr *)pos;
-+		if (ntohs(udph->dest) != 319)
-+			return NULL;
-+		ptp_loc = pos + sizeof(struct udphdr);
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	return ptp_loc;
-+}
-+
-+static int dpa_ptp_store_stamp(const struct dpa_priv_s *priv,
-+		struct sk_buff *skb, void *data, enum port_type rx_tx,
-+		struct dpa_ptp_data *ptp_data)
-+{
-+	u64 nsec;
-+	u32 mod;
-+	u8 *ptp_loc;
-+	u16 eth_type;
-+
-+	ptp_loc = dpa_ptp_parse_packet(skb, &eth_type);
-+	if (!ptp_loc)
-+		return -EINVAL;
-+
-+	switch (eth_type) {
-+	case ETH_P_IP:
-+		ptp_data->ident.netw_prot = DPA_PTP_PROT_IPV4;
-+		break;
-+	case ETH_P_IPV6:
-+		ptp_data->ident.netw_prot = DPA_PTP_PROT_IPV6;
-+		break;
-+	case ETH_P_1588:
-+		ptp_data->ident.netw_prot = DPA_PTP_PROT_802_3;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	if (!pskb_may_pull(skb, ptp_loc - skb->data + PTP_OFFS_SEQ_ID + 2))
-+		return -EINVAL;
-+
-+	ptp_data->ident.version = *(ptp_loc + PTP_OFFS_VER_PTP) & 0xf;
-+	ptp_data->ident.msg_type = *(ptp_loc + PTP_OFFS_MSG_TYPE) & 0xf;
-+	ptp_data->ident.seq_id = *((u16 *)(ptp_loc + PTP_OFFS_SEQ_ID));
-+	memcpy(ptp_data->ident.snd_port_id, ptp_loc + PTP_OFFS_SRCPRTID,
-+			DPA_PTP_SOURCE_PORT_LENGTH);
-+
-+	nsec = dpa_get_timestamp_ns(priv, rx_tx, data);
-+	mod = do_div(nsec, NANOSEC_PER_SECOND);
-+	ptp_data->ts.sec = nsec;
-+	ptp_data->ts.nsec = mod;
-+
-+	return 0;
-+}
-+
-+void dpa_ptp_store_txstamp(const struct dpa_priv_s *priv,
-+				struct sk_buff *skb, void *data)
-+{
-+	struct dpa_ptp_tsu *tsu = priv->tsu;
-+	struct dpa_ptp_data ptp_tx_data;
-+
-+	if (dpa_ptp_store_stamp(priv, skb, data, TX, &ptp_tx_data))
-+		return;
-+
-+	dpa_ptp_insert(&tsu->tx_timestamps, &ptp_tx_data);
-+}
-+
-+void dpa_ptp_store_rxstamp(const struct dpa_priv_s *priv,
-+				struct sk_buff *skb, void *data)
-+{
-+	struct dpa_ptp_tsu *tsu = priv->tsu;
-+	struct dpa_ptp_data ptp_rx_data;
-+
-+	if (dpa_ptp_store_stamp(priv, skb, data, RX, &ptp_rx_data))
-+		return;
-+
-+	dpa_ptp_insert(&tsu->rx_timestamps, &ptp_rx_data);
-+}
-+
-+static uint8_t dpa_get_tx_timestamp(struct dpa_ptp_tsu *ptp_tsu,
-+				    struct dpa_ptp_ident *ident,
-+				    struct dpa_ptp_time *ts)
-+{
-+	struct dpa_ptp_tsu *tsu = ptp_tsu;
-+	struct dpa_ptp_time tmp;
-+	int flag;
-+
-+	flag = dpa_ptp_find_and_remove(&tsu->tx_timestamps, ident, &tmp);
-+	if (!flag) {
-+		ts->sec = tmp.sec;
-+		ts->nsec = tmp.nsec;
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+static uint8_t dpa_get_rx_timestamp(struct dpa_ptp_tsu *ptp_tsu,
-+				    struct dpa_ptp_ident *ident,
-+				    struct dpa_ptp_time *ts)
-+{
-+	struct dpa_ptp_tsu *tsu = ptp_tsu;
-+	struct dpa_ptp_time tmp;
-+	int flag;
-+
-+	flag = dpa_ptp_find_and_remove(&tsu->rx_timestamps, ident, &tmp);
-+	if (!flag) {
-+		ts->sec = tmp.sec;
-+		ts->nsec = tmp.nsec;
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+static void dpa_set_fiper_alarm(struct dpa_ptp_tsu *tsu,
-+		struct dpa_ptp_time *cnt_time)
-+{
-+	struct mac_device *mac_dev = tsu->dpa_priv->mac_dev;
-+	u64 tmp, fiper;
-+
-+	if (mac_dev->fm_rtc_disable)
-+		mac_dev->fm_rtc_disable(get_fm_handle(tsu->dpa_priv->net_dev));
-+
-+	/* TMR_FIPER1 will pulse every second after ALARM1 expired */
-+	tmp = (u64)cnt_time->sec * NANOSEC_PER_SECOND + (u64)cnt_time->nsec;
-+	fiper = NANOSEC_PER_SECOND - DPA_PTP_NOMINAL_FREQ_PERIOD_NS;
-+	if (mac_dev->fm_rtc_set_alarm)
-+		mac_dev->fm_rtc_set_alarm(get_fm_handle(tsu->dpa_priv->net_dev),
-+					  0, tmp);
-+	if (mac_dev->fm_rtc_set_fiper)
-+		mac_dev->fm_rtc_set_fiper(get_fm_handle(tsu->dpa_priv->net_dev),
-+					  0, fiper);
-+
-+	if (mac_dev->fm_rtc_enable)
-+		mac_dev->fm_rtc_enable(get_fm_handle(tsu->dpa_priv->net_dev));
-+}
-+
-+static void dpa_get_curr_cnt(struct dpa_ptp_tsu *tsu,
-+		struct dpa_ptp_time *curr_time)
-+{
-+	struct mac_device *mac_dev = tsu->dpa_priv->mac_dev;
-+	u64 tmp;
-+	u32 mod;
-+
-+	if (mac_dev->fm_rtc_get_cnt)
-+		mac_dev->fm_rtc_get_cnt(get_fm_handle(tsu->dpa_priv->net_dev),
-+					&tmp);
-+
-+	mod = do_div(tmp, NANOSEC_PER_SECOND);
-+	curr_time->sec = (u32)tmp;
-+	curr_time->nsec = mod;
-+}
-+
-+static void dpa_set_1588cnt(struct dpa_ptp_tsu *tsu,
-+		struct dpa_ptp_time *cnt_time)
-+{
-+	struct mac_device *mac_dev = tsu->dpa_priv->mac_dev;
-+	u64 tmp;
-+
-+	tmp = (u64)cnt_time->sec * NANOSEC_PER_SECOND + (u64)cnt_time->nsec;
-+
-+	if (mac_dev->fm_rtc_set_cnt)
-+		mac_dev->fm_rtc_set_cnt(get_fm_handle(tsu->dpa_priv->net_dev),
-+					tmp);
-+
-+	/* Restart fiper two seconds later */
-+	cnt_time->sec += 2;
-+	cnt_time->nsec = 0;
-+	dpa_set_fiper_alarm(tsu, cnt_time);
-+}
-+
-+static void dpa_get_drift(struct dpa_ptp_tsu *tsu, u32 *addend)
-+{
-+	struct mac_device *mac_dev = tsu->dpa_priv->mac_dev;
-+	u32 drift;
-+
-+	if (mac_dev->fm_rtc_get_drift)
-+		mac_dev->fm_rtc_get_drift(get_fm_handle(tsu->dpa_priv->net_dev),
-+					  &drift);
-+
-+	*addend = drift;
-+}
-+
-+static void dpa_set_drift(struct dpa_ptp_tsu *tsu, u32 addend)
-+{
-+	struct mac_device *mac_dev = tsu->dpa_priv->mac_dev;
-+
-+	if (mac_dev->fm_rtc_set_drift)
-+		mac_dev->fm_rtc_set_drift(get_fm_handle(tsu->dpa_priv->net_dev),
-+					  addend);
-+}
-+
-+static void dpa_flush_timestamp(struct dpa_ptp_tsu *tsu)
-+{
-+	dpa_ptp_reset_circ(&tsu->rx_timestamps, DEFAULT_PTP_RX_BUF_SZ);
-+	dpa_ptp_reset_circ(&tsu->tx_timestamps, DEFAULT_PTP_TX_BUF_SZ);
-+}
-+
-+int dpa_ioctl_1588(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(dev);
-+	struct dpa_ptp_tsu *tsu = priv->tsu;
-+	struct mac_device *mac_dev = priv->mac_dev;
-+	struct dpa_ptp_data ptp_data;
-+	struct dpa_ptp_data *ptp_data_user;
-+	struct dpa_ptp_time act_time;
-+	u32 addend;
-+	int retval = 0;
-+
-+	if (!tsu || !tsu->valid)
-+		return -ENODEV;
-+
-+	switch (cmd) {
-+	case PTP_ENBL_TXTS_IOCTL:
-+		tsu->hwts_tx_en_ioctl = 1;
-+		if (mac_dev->fm_rtc_enable)
-+			mac_dev->fm_rtc_enable(get_fm_handle(dev));
-+		if (mac_dev->ptp_enable)
-+			mac_dev->ptp_enable(mac_dev->get_mac_handle(mac_dev));
-+		break;
-+	case PTP_DSBL_TXTS_IOCTL:
-+		tsu->hwts_tx_en_ioctl = 0;
-+		if (mac_dev->fm_rtc_disable)
-+			mac_dev->fm_rtc_disable(get_fm_handle(dev));
-+		if (mac_dev->ptp_disable)
-+			mac_dev->ptp_disable(mac_dev->get_mac_handle(mac_dev));
-+		break;
-+	case PTP_ENBL_RXTS_IOCTL:
-+		tsu->hwts_rx_en_ioctl = 1;
-+		break;
-+	case PTP_DSBL_RXTS_IOCTL:
-+		tsu->hwts_rx_en_ioctl = 0;
-+		break;
-+	case PTP_GET_RX_TIMESTAMP:
-+		ptp_data_user = (struct dpa_ptp_data *)ifr->ifr_data;
-+		if (copy_from_user(&ptp_data.ident,
-+				&ptp_data_user->ident, sizeof(ptp_data.ident)))
-+			return -EINVAL;
-+
-+		if (dpa_get_rx_timestamp(tsu, &ptp_data.ident, &ptp_data.ts))
-+			return -EAGAIN;
-+
-+		if (copy_to_user((void __user *)&ptp_data_user->ts,
-+				&ptp_data.ts, sizeof(ptp_data.ts)))
-+			return -EFAULT;
-+		break;
-+	case PTP_GET_TX_TIMESTAMP:
-+		ptp_data_user = (struct dpa_ptp_data *)ifr->ifr_data;
-+		if (copy_from_user(&ptp_data.ident,
-+				&ptp_data_user->ident, sizeof(ptp_data.ident)))
-+			return -EINVAL;
-+
-+		if (dpa_get_tx_timestamp(tsu, &ptp_data.ident, &ptp_data.ts))
-+			return -EAGAIN;
-+
-+		if (copy_to_user((void __user *)&ptp_data_user->ts,
-+				&ptp_data.ts, sizeof(ptp_data.ts)))
-+			return -EFAULT;
-+		break;
-+	case PTP_GET_TIME:
-+		dpa_get_curr_cnt(tsu, &act_time);
-+		if (copy_to_user(ifr->ifr_data, &act_time, sizeof(act_time)))
-+			return -EFAULT;
-+		break;
-+	case PTP_SET_TIME:
-+		if (copy_from_user(&act_time, ifr->ifr_data, sizeof(act_time)))
-+			return -EINVAL;
-+		dpa_set_1588cnt(tsu, &act_time);
-+		break;
-+	case PTP_GET_ADJ:
-+		dpa_get_drift(tsu, &addend);
-+		if (copy_to_user(ifr->ifr_data, &addend, sizeof(addend)))
-+			return -EFAULT;
-+		break;
-+	case PTP_SET_ADJ:
-+		if (copy_from_user(&addend, ifr->ifr_data, sizeof(addend)))
-+			return -EINVAL;
-+		dpa_set_drift(tsu, addend);
-+		break;
-+	case PTP_SET_FIPER_ALARM:
-+		if (copy_from_user(&act_time, ifr->ifr_data, sizeof(act_time)))
-+			return -EINVAL;
-+		dpa_set_fiper_alarm(tsu, &act_time);
-+		break;
-+	case PTP_CLEANUP_TS:
-+		dpa_flush_timestamp(tsu);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return retval;
-+}
-+
-+int dpa_ptp_init(struct dpa_priv_s *priv)
-+{
-+	struct dpa_ptp_tsu *tsu;
-+
-+	/* Allocate memory for PTP structure */
-+	tsu = kzalloc(sizeof(struct dpa_ptp_tsu), GFP_KERNEL);
-+	if (!tsu)
-+		return -ENOMEM;
-+
-+	tsu->valid = TRUE;
-+	tsu->dpa_priv = priv;
-+
-+	dpa_ptp_init_circ(&tsu->rx_timestamps, DEFAULT_PTP_RX_BUF_SZ);
-+	dpa_ptp_init_circ(&tsu->tx_timestamps, DEFAULT_PTP_TX_BUF_SZ);
-+
-+	priv->tsu = tsu;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(dpa_ptp_init);
-+
-+void dpa_ptp_cleanup(struct dpa_priv_s *priv)
-+{
-+	struct dpa_ptp_tsu *tsu = priv->tsu;
-+
-+	tsu->valid = FALSE;
-+	vfree(tsu->rx_timestamps.circ_buf.buf);
-+	vfree(tsu->tx_timestamps.circ_buf.buf);
-+
-+	kfree(tsu);
-+}
-+EXPORT_SYMBOL(dpa_ptp_cleanup);
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_1588.h
-@@ -0,0 +1,138 @@
-+/* Copyright (C) 2011 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-+ *
-+ */
-+#ifndef __DPAA_1588_H__
-+#define __DPAA_1588_H__
-+
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/circ_buf.h>
-+#include <linux/fsl_qman.h>
-+
-+#define DEFAULT_PTP_RX_BUF_SZ		256
-+#define DEFAULT_PTP_TX_BUF_SZ		256
-+
-+/* 1588 private ioctl calls */
-+#define PTP_ENBL_TXTS_IOCTL	SIOCDEVPRIVATE
-+#define PTP_DSBL_TXTS_IOCTL	(SIOCDEVPRIVATE + 1)
-+#define PTP_ENBL_RXTS_IOCTL	(SIOCDEVPRIVATE + 2)
-+#define PTP_DSBL_RXTS_IOCTL	(SIOCDEVPRIVATE + 3)
-+#define PTP_GET_TX_TIMESTAMP	(SIOCDEVPRIVATE + 4)
-+#define PTP_GET_RX_TIMESTAMP	(SIOCDEVPRIVATE + 5)
-+#define PTP_SET_TIME		(SIOCDEVPRIVATE + 6)
-+#define PTP_GET_TIME		(SIOCDEVPRIVATE + 7)
-+#define PTP_SET_FIPER_ALARM	(SIOCDEVPRIVATE + 8)
-+#define PTP_SET_ADJ		(SIOCDEVPRIVATE + 9)
-+#define PTP_GET_ADJ		(SIOCDEVPRIVATE + 10)
-+#define PTP_CLEANUP_TS		(SIOCDEVPRIVATE + 11)
-+
-+/* PTP V2 message type */
-+enum {
-+	PTP_MSGTYPE_SYNC		= 0x0,
-+	PTP_MSGTYPE_DELREQ		= 0x1,
-+	PTP_MSGTYPE_PDELREQ		= 0x2,
-+	PTP_MSGTYPE_PDELRESP		= 0x3,
-+	PTP_MSGTYPE_FLWUP		= 0x8,
-+	PTP_MSGTYPE_DELRESP		= 0x9,
-+	PTP_MSGTYPE_PDELRES_FLWUP	= 0xA,
-+	PTP_MSGTYPE_ANNOUNCE		= 0xB,
-+	PTP_MSGTYPE_SGNLNG		= 0xC,
-+	PTP_MSGTYPE_MNGMNT		= 0xD,
-+};
-+
-+/* Byte offset of data in the PTP V2 headers */
-+#define PTP_OFFS_MSG_TYPE		0
-+#define PTP_OFFS_VER_PTP		1
-+#define PTP_OFFS_MSG_LEN		2
-+#define PTP_OFFS_DOM_NMB		4
-+#define PTP_OFFS_FLAGS			6
-+#define PTP_OFFS_CORFIELD		8
-+#define PTP_OFFS_SRCPRTID		20
-+#define PTP_OFFS_SEQ_ID			30
-+#define PTP_OFFS_CTRL			32
-+#define PTP_OFFS_LOGMEAN		33
-+
-+#define PTP_IP_OFFS			14
-+#define PTP_UDP_OFFS			34
-+#define PTP_HEADER_OFFS			42
-+#define PTP_MSG_TYPE_OFFS		(PTP_HEADER_OFFS + PTP_OFFS_MSG_TYPE)
-+#define PTP_SPORT_ID_OFFS		(PTP_HEADER_OFFS + PTP_OFFS_SRCPRTID)
-+#define PTP_SEQ_ID_OFFS			(PTP_HEADER_OFFS + PTP_OFFS_SEQ_ID)
-+#define PTP_CTRL_OFFS			(PTP_HEADER_OFFS + PTP_OFFS_CTRL)
-+
-+/* 1588-2008 network protocol enumeration values */
-+#define DPA_PTP_PROT_IPV4		1
-+#define DPA_PTP_PROT_IPV6		2
-+#define DPA_PTP_PROT_802_3		3
-+#define DPA_PTP_PROT_DONTCARE		0xFFFF
-+
-+#define DPA_PTP_SOURCE_PORT_LENGTH	10
-+#define DPA_PTP_HEADER_SZE		34
-+#define DPA_ETYPE_LEN			2
-+#define DPA_VLAN_TAG_LEN		4
-+#define NANOSEC_PER_SECOND		1000000000
-+
-+/* The threshold between the current found one and the oldest one */
-+#define TS_ACCUMULATION_THRESHOLD	50
-+
-+/* Struct needed to identify a timestamp */
-+struct dpa_ptp_ident {
-+	u8	version;
-+	u8	msg_type;
-+	u16	netw_prot;
-+	u16	seq_id;
-+	u8	snd_port_id[DPA_PTP_SOURCE_PORT_LENGTH];
-+};
-+
-+/* Timestamp format in 1588-2008 */
-+struct dpa_ptp_time {
-+	u64	sec;	/* just 48 bit used */
-+	u32	nsec;
-+};
-+
-+/* needed for timestamp data over ioctl */
-+struct dpa_ptp_data {
-+	struct dpa_ptp_ident	ident;
-+	struct dpa_ptp_time	ts;
-+};
-+
-+struct dpa_ptp_circ_buf {
-+	struct circ_buf circ_buf;
-+	u32 size;
-+	spinlock_t ptp_lock;
-+};
-+
-+/* PTP TSU control structure */
-+struct dpa_ptp_tsu {
-+	struct dpa_priv_s *dpa_priv;
-+	bool valid;
-+	struct dpa_ptp_circ_buf rx_timestamps;
-+	struct dpa_ptp_circ_buf tx_timestamps;
-+
-+	/* HW timestamping over ioctl enabled flag */
-+	int hwts_tx_en_ioctl;
-+	int hwts_rx_en_ioctl;
-+};
-+
-+extern int dpa_ptp_init(struct dpa_priv_s *priv);
-+extern void dpa_ptp_cleanup(struct dpa_priv_s *priv);
-+extern void dpa_ptp_store_txstamp(const struct dpa_priv_s *priv,
-+				struct sk_buff *skb, void *data);
-+extern void dpa_ptp_store_rxstamp(const struct dpa_priv_s *priv,
-+				struct sk_buff *skb, void *data);
-+extern int dpa_ioctl_1588(struct net_device *dev, struct ifreq *ifr, int cmd);
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_debugfs.c
-@@ -0,0 +1,180 @@
-+/* Copyright 2008-2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/fsl_qman.h>	/* struct qm_mcr_querycgr */
-+#include <linux/debugfs.h>
-+#include "dpaa_debugfs.h"
-+#include "dpaa_eth.h" /* struct dpa_priv_s, dpa_percpu_priv_s, dpa_bp */
-+
-+#define DPA_DEBUGFS_DESCRIPTION "FSL DPAA Ethernet debugfs entries"
-+#define DPA_ETH_DEBUGFS_ROOT "fsl_dpa"
-+
-+static struct dentry *dpa_debugfs_root;
-+
-+static int __cold dpa_debugfs_loop_open(struct inode *inode, struct file *file);
-+static ssize_t dpa_loop_write(struct file *f,
-+	const char __user *buf, size_t count, loff_t *off);
-+
-+static const struct file_operations dpa_debugfs_lp_fops = {
-+	.open		= dpa_debugfs_loop_open,
-+	.write		= dpa_loop_write,
-+	.read		= seq_read,
-+	.llseek		= seq_lseek,
-+	.release	= single_release,
-+};
-+
-+static int dpa_debugfs_loop_show(struct seq_file *file, void *offset)
-+{
-+	struct dpa_priv_s *priv;
-+
-+	BUG_ON(offset == NULL);
-+
-+	priv = netdev_priv((struct net_device *)file->private);
-+	seq_printf(file, "%d->%d\n", priv->loop_id, priv->loop_to);
-+
-+	return 0;
-+}
-+
-+static int user_input_convert(const char __user *user_buf, size_t count,
-+			      long *val)
-+{
-+	char buf[12];
-+
-+	if (count > sizeof(buf) - 1)
-+		return -EINVAL;
-+	if (copy_from_user(buf, user_buf, count))
-+		return -EFAULT;
-+	buf[count] = '\0';
-+	if (kstrtol(buf, 0, val))
-+		return -EINVAL;
-+	return 0;
-+}
-+
-+static ssize_t dpa_loop_write(struct file *f,
-+	const char __user *buf, size_t count, loff_t *off)
-+{
-+	struct dpa_priv_s *priv;
-+	struct net_device *netdev;
-+	struct seq_file *sf;
-+	int ret;
-+	long val;
-+
-+	ret = user_input_convert(buf, count, &val);
-+	if (ret)
-+		return ret;
-+
-+	sf = (struct seq_file *)f->private_data;
-+	netdev = (struct net_device *)sf->private;
-+	priv = netdev_priv(netdev);
-+
-+	priv->loop_to = ((val < 0) || (val > 20)) ? -1 : val;
-+
-+	return count;
-+}
-+
-+static int __cold dpa_debugfs_loop_open(struct inode *inode, struct file *file)
-+{
-+	int			 _errno;
-+	const struct net_device	*net_dev;
-+
-+	_errno = single_open(file, dpa_debugfs_loop_show, inode->i_private);
-+	if (unlikely(_errno < 0)) {
-+		net_dev = (struct net_device *)inode->i_private;
-+
-+		if (netif_msg_drv((struct dpa_priv_s *)netdev_priv(net_dev)))
-+			netdev_err(net_dev, "single_open() = %d\n",
-+					_errno);
-+	}
-+
-+	return _errno;
-+}
-+
-+
-+int dpa_netdev_debugfs_create(struct net_device *net_dev)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(net_dev);
-+	static int cnt;
-+	char loop_file_name[100];
-+
-+	if (unlikely(dpa_debugfs_root == NULL)) {
-+		pr_err(KBUILD_MODNAME ": %s:%hu:%s(): \t%s\n",
-+				   KBUILD_BASENAME".c", __LINE__, __func__,
-+				   "root debugfs missing, possible module ordering issue");
-+		return -ENOMEM;
-+	}
-+
-+	sprintf(loop_file_name, "eth%d_loop", ++cnt);
-+	priv->debugfs_loop_file = debugfs_create_file(loop_file_name,
-+							 S_IRUGO,
-+							 dpa_debugfs_root,
-+							 net_dev,
-+							 &dpa_debugfs_lp_fops);
-+	if (unlikely(priv->debugfs_loop_file == NULL)) {
-+		netdev_err(net_dev, "debugfs_create_file(%s/%s)",
-+				dpa_debugfs_root->d_iname,
-+				loop_file_name);
-+
-+		return -ENOMEM;
-+	}
-+	return 0;
-+}
-+
-+void dpa_netdev_debugfs_remove(struct net_device *net_dev)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(net_dev);
-+
-+	debugfs_remove(priv->debugfs_loop_file);
-+}
-+
-+int __init dpa_debugfs_module_init(void)
-+{
-+	int	 _errno = 0;
-+
-+	pr_info(KBUILD_MODNAME ": " DPA_DEBUGFS_DESCRIPTION "\n");
-+
-+	dpa_debugfs_root = debugfs_create_dir(DPA_ETH_DEBUGFS_ROOT, NULL);
-+
-+	if (unlikely(dpa_debugfs_root == NULL)) {
-+		_errno = -ENOMEM;
-+		pr_err(KBUILD_MODNAME ": %s:%hu:%s():\n",
-+				   KBUILD_BASENAME".c", __LINE__, __func__);
-+		pr_err("\tdebugfs_create_dir(%s/"KBUILD_MODNAME") = %d\n",
-+			   DPA_ETH_DEBUGFS_ROOT, _errno);
-+	}
-+
-+	return _errno;
-+}
-+
-+void __exit dpa_debugfs_module_exit(void)
-+{
-+	debugfs_remove(dpa_debugfs_root);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_debugfs.h
-@@ -0,0 +1,43 @@
-+/* Copyright 2008-2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef DPAA_DEBUGFS_H_
-+#define DPAA_DEBUGFS_H_
-+
-+#include <linux/netdevice.h>
-+#include <linux/dcache.h>	/* struct dentry needed in dpaa_eth.h */
-+
-+int dpa_netdev_debugfs_create(struct net_device *net_dev);
-+void dpa_netdev_debugfs_remove(struct net_device *net_dev);
-+int __init dpa_debugfs_module_init(void);
-+void __exit dpa_debugfs_module_exit(void);
-+
-+#endif /* DPAA_DEBUGFS_H_ */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-@@ -0,0 +1,1210 @@
-+/* Copyright 2008-2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifdef CONFIG_FSL_DPAA_ETH_DEBUG
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": %s:%hu:%s() " fmt, \
-+	KBUILD_BASENAME".c", __LINE__, __func__
-+#else
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": " fmt
-+#endif
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_net.h>
-+#include <linux/kthread.h>
-+#include <linux/io.h>
-+#include <linux/if_arp.h>	/* arp_hdr_len() */
-+#include <linux/if_vlan.h>	/* VLAN_HLEN */
-+#include <linux/icmp.h>		/* struct icmphdr */
-+#include <linux/ip.h>		/* struct iphdr */
-+#include <linux/ipv6.h>		/* struct ipv6hdr */
-+#include <linux/udp.h>		/* struct udphdr */
-+#include <linux/tcp.h>		/* struct tcphdr */
-+#include <linux/net.h>		/* net_ratelimit() */
-+#include <linux/if_ether.h>	/* ETH_P_IP and ETH_P_IPV6 */
-+#include <linux/highmem.h>
-+#include <linux/percpu.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/fsl_bman.h>
-+#ifdef CONFIG_SOC_BUS
-+#include <linux/sys_soc.h>      /* soc_device_match */
-+#endif
-+
-+#include "fsl_fman.h"
-+#include "fm_ext.h"
-+#include "fm_port_ext.h"
-+
-+#include "mac.h"
-+#include "dpaa_eth.h"
-+#include "dpaa_eth_common.h"
-+#ifdef CONFIG_FSL_DPAA_DBG_LOOP
-+#include "dpaa_debugfs.h"
-+#endif /* CONFIG_FSL_DPAA_DBG_LOOP */
-+
-+/* CREATE_TRACE_POINTS only needs to be defined once. Other dpa files
-+ * using trace events only need to #include <trace/events/sched.h>
-+ */
-+#define CREATE_TRACE_POINTS
-+#include "dpaa_eth_trace.h"
-+
-+#define DPA_NAPI_WEIGHT		64
-+
-+/* Valid checksum indication */
-+#define DPA_CSUM_VALID		0xFFFF
-+
-+#define DPA_DESCRIPTION "FSL DPAA Ethernet driver"
-+
-+MODULE_LICENSE("Dual BSD/GPL");
-+
-+MODULE_AUTHOR("Andy Fleming <afleming@freescale.com>");
-+
-+MODULE_DESCRIPTION(DPA_DESCRIPTION);
-+
-+static uint8_t debug = -1;
-+module_param(debug, byte, S_IRUGO);
-+MODULE_PARM_DESC(debug, "Module/Driver verbosity level");
-+
-+/* This has to work in tandem with the DPA_CS_THRESHOLD_xxx values. */
-+static uint16_t tx_timeout = 1000;
-+module_param(tx_timeout, ushort, S_IRUGO);
-+MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms");
-+
-+static const char rtx[][3] = {
-+	[RX] = "RX",
-+	[TX] = "TX"
-+};
-+
-+#ifndef CONFIG_PPC
-+bool dpaa_errata_a010022;
-+EXPORT_SYMBOL(dpaa_errata_a010022);
-+#endif
-+
-+/* BM */
-+
-+#define DPAA_ETH_MAX_PAD (L1_CACHE_BYTES * 8)
-+
-+static uint8_t dpa_priv_common_bpid;
-+
-+#ifdef CONFIG_FSL_DPAA_DBG_LOOP
-+struct net_device *dpa_loop_netdevs[20];
-+#endif
-+
-+#ifdef CONFIG_PM
-+
-+static int dpaa_suspend(struct device *dev)
-+{
-+	struct net_device	*net_dev;
-+	struct dpa_priv_s	*priv;
-+	struct mac_device	*mac_dev;
-+	int			err = 0;
-+
-+	net_dev = dev_get_drvdata(dev);
-+
-+	if (net_dev->flags & IFF_UP) {
-+		priv = netdev_priv(net_dev);
-+		mac_dev = priv->mac_dev;
-+
-+		if (priv->wol & DPAA_WOL_MAGIC) {
-+			err = priv->mac_dev->set_wol(mac_dev->port_dev[RX],
-+				priv->mac_dev->get_mac_handle(mac_dev), true);
-+			if (err) {
-+				netdev_err(net_dev, "set_wol() = %d\n", err);
-+				goto set_wol_failed;
-+			}
-+		}
-+
-+		err = fm_port_suspend(mac_dev->port_dev[RX]);
-+		if (err) {
-+			netdev_err(net_dev, "fm_port_suspend(RX) = %d\n", err);
-+			goto rx_port_suspend_failed;
-+		}
-+
-+		err = fm_port_suspend(mac_dev->port_dev[TX]);
-+		if (err) {
-+			netdev_err(net_dev, "fm_port_suspend(TX) = %d\n", err);
-+			goto tx_port_suspend_failed;
-+		}
-+	}
-+
-+	return 0;
-+
-+tx_port_suspend_failed:
-+	fm_port_resume(mac_dev->port_dev[RX]);
-+rx_port_suspend_failed:
-+	if (priv->wol & DPAA_WOL_MAGIC) {
-+		priv->mac_dev->set_wol(mac_dev->port_dev[RX],
-+			priv->mac_dev->get_mac_handle(mac_dev), false);
-+	}
-+set_wol_failed:
-+	return err;
-+}
-+
-+static int dpaa_resume(struct device *dev)
-+{
-+	struct net_device	*net_dev;
-+	struct dpa_priv_s	*priv;
-+	struct mac_device	*mac_dev;
-+	int			err = 0;
-+
-+	net_dev = dev_get_drvdata(dev);
-+
-+	if (net_dev->flags & IFF_UP) {
-+		priv = netdev_priv(net_dev);
-+		mac_dev = priv->mac_dev;
-+
-+		err = fm_mac_resume(mac_dev->get_mac_handle(mac_dev));
-+		if (err) {
-+			netdev_err(net_dev, "fm_mac_resume = %d\n", err);
-+			goto resume_failed;
-+		}
-+
-+		err = fm_port_resume(mac_dev->port_dev[TX]);
-+		if (err) {
-+			netdev_err(net_dev, "fm_port_resume(TX) = %d\n", err);
-+			goto resume_failed;
-+		}
-+
-+		err = fm_port_resume(mac_dev->port_dev[RX]);
-+		if (err) {
-+			netdev_err(net_dev, "fm_port_resume(RX) = %d\n", err);
-+			goto resume_failed;
-+		}
-+
-+		if (priv->wol & DPAA_WOL_MAGIC) {
-+			err = priv->mac_dev->set_wol(mac_dev->port_dev[RX],
-+				priv->mac_dev->get_mac_handle(mac_dev), false);
-+			if (err) {
-+				netdev_err(net_dev, "set_wol() = %d\n", err);
-+				goto resume_failed;
-+			}
-+		}
-+	}
-+
-+	return 0;
-+
-+resume_failed:
-+	return err;
-+}
-+
-+static const struct dev_pm_ops dpaa_pm_ops = {
-+	.suspend = dpaa_suspend,
-+	.resume = dpaa_resume,
-+};
-+
-+#define DPAA_PM_OPS (&dpaa_pm_ops)
-+
-+#else /* CONFIG_PM */
-+
-+#define DPAA_PM_OPS NULL
-+
-+#endif /* CONFIG_PM */
-+
-+/* Checks whether the checksum field in Parse Results array is valid
-+ * (equals 0xFFFF) and increments the .cse counter otherwise
-+ */
-+static inline void
-+dpa_csum_validation(const struct dpa_priv_s	*priv,
-+		struct dpa_percpu_priv_s *percpu_priv,
-+		const struct qm_fd *fd)
-+{
-+	dma_addr_t addr = qm_fd_addr(fd);
-+	struct dpa_bp *dpa_bp = priv->dpa_bp;
-+	void *frm = phys_to_virt(addr);
-+	fm_prs_result_t *parse_result;
-+
-+	if (unlikely(!frm))
-+		return;
-+
-+	dma_sync_single_for_cpu(dpa_bp->dev, addr, DPA_RX_PRIV_DATA_SIZE +
-+				DPA_PARSE_RESULTS_SIZE, DMA_BIDIRECTIONAL);
-+
-+	parse_result = (fm_prs_result_t *)(frm + DPA_RX_PRIV_DATA_SIZE);
-+
-+	if (parse_result->cksum != DPA_CSUM_VALID)
-+		percpu_priv->rx_errors.cse++;
-+}
-+
-+static void _dpa_rx_error(struct net_device *net_dev,
-+		const struct dpa_priv_s	*priv,
-+		struct dpa_percpu_priv_s *percpu_priv,
-+		const struct qm_fd *fd,
-+		u32 fqid)
-+{
-+	/* limit common, possibly innocuous Rx FIFO Overflow errors'
-+	 * interference with zero-loss convergence benchmark results.
-+	 */
-+	if (likely(fd->status & FM_FD_STAT_ERR_PHYSICAL))
-+		pr_warn_once("fsl-dpa: non-zero error counters in fman statistics (sysfs)\n");
-+	else
-+		if (netif_msg_hw(priv) && net_ratelimit())
-+			netdev_dbg(net_dev, "Err FD status = 0x%08x\n",
-+					fd->status & FM_FD_STAT_RX_ERRORS);
-+#ifdef CONFIG_FSL_DPAA_HOOKS
-+	if (dpaa_eth_hooks.rx_error &&
-+		dpaa_eth_hooks.rx_error(net_dev, fd, fqid) == DPAA_ETH_STOLEN)
-+		/* it's up to the hook to perform resource cleanup */
-+		return;
-+#endif
-+	percpu_priv->stats.rx_errors++;
-+
-+	if (fd->status & FM_PORT_FRM_ERR_DMA)
-+		percpu_priv->rx_errors.dme++;
-+	if (fd->status & FM_PORT_FRM_ERR_PHYSICAL)
-+		percpu_priv->rx_errors.fpe++;
-+	if (fd->status & FM_PORT_FRM_ERR_SIZE)
-+		percpu_priv->rx_errors.fse++;
-+	if (fd->status & FM_PORT_FRM_ERR_PRS_HDR_ERR)
-+		percpu_priv->rx_errors.phe++;
-+	if (fd->status & FM_FD_STAT_L4CV)
-+		dpa_csum_validation(priv, percpu_priv, fd);
-+
-+	dpa_fd_release(net_dev, fd);
-+}
-+
-+static void _dpa_tx_error(struct net_device		*net_dev,
-+			  const struct dpa_priv_s	*priv,
-+			  struct dpa_percpu_priv_s	*percpu_priv,
-+			  const struct qm_fd		*fd,
-+			  u32				 fqid)
-+{
-+	struct sk_buff *skb;
-+
-+	if (netif_msg_hw(priv) && net_ratelimit())
-+		netdev_warn(net_dev, "FD status = 0x%08x\n",
-+				fd->status & FM_FD_STAT_TX_ERRORS);
-+#ifdef CONFIG_FSL_DPAA_HOOKS
-+	if (dpaa_eth_hooks.tx_error &&
-+		dpaa_eth_hooks.tx_error(net_dev, fd, fqid) == DPAA_ETH_STOLEN)
-+		/* now the hook must ensure proper cleanup */
-+		return;
-+#endif
-+	percpu_priv->stats.tx_errors++;
-+
-+	/* If we intended the buffers from this frame to go into the bpools
-+	 * when the FMan transmit was done, we need to put it in manually.
-+	 */
-+	if (fd->bpid != 0xff) {
-+		dpa_fd_release(net_dev, fd);
-+		return;
-+	}
-+
-+	skb = _dpa_cleanup_tx_fd(priv, fd);
-+	dev_kfree_skb(skb);
-+}
-+
-+/* Helper function to factor out frame validation logic on all Rx paths. Its
-+ * purpose is to extract from the Parse Results structure information about
-+ * the integrity of the frame, its checksum, the length of the parsed headers
-+ * and whether the frame is suitable for GRO.
-+ *
-+ * Assumes no parser errors, since any error frame is dropped before this
-+ * function is called.
-+ *
-+ * @skb		will have its ip_summed field overwritten;
-+ * @use_gro	will only be written with 0, if the frame is definitely not
-+ *		GRO-able; otherwise, it will be left unchanged;
-+ * @hdr_size	will be written with a safe value, at least the size of the
-+ *		headers' length.
-+ */
-+void __hot _dpa_process_parse_results(const fm_prs_result_t *parse_results,
-+				      const struct qm_fd *fd,
-+				      struct sk_buff *skb, int *use_gro)
-+{
-+	if (fd->status & FM_FD_STAT_L4CV) {
-+		/* The parser has run and performed L4 checksum validation.
-+		 * We know there were no parser errors (and implicitly no
-+		 * L4 csum error), otherwise we wouldn't be here.
-+		 */
-+		skb->ip_summed = CHECKSUM_UNNECESSARY;
-+
-+		/* Don't go through GRO for certain types of traffic that
-+		 * we know are not GRO-able, such as dgram-based protocols.
-+		 * In the worst-case scenarios, such as small-pkt terminating
-+		 * UDP, the extra GRO processing would be overkill.
-+		 *
-+		 * The only protocol the Parser supports that is also GRO-able
-+		 * is currently TCP.
-+		 */
-+		if (!fm_l4_frame_is_tcp(parse_results))
-+			*use_gro = 0;
-+
-+		return;
-+	}
-+
-+	/* We're here because either the parser didn't run or the L4 checksum
-+	 * was not verified. This may include the case of a UDP frame with
-+	 * checksum zero or an L4 proto other than TCP/UDP
-+	 */
-+	skb->ip_summed = CHECKSUM_NONE;
-+
-+	/* Bypass GRO for unknown traffic or if no PCDs are applied */
-+	*use_gro = 0;
-+}
-+
-+int dpaa_eth_poll(struct napi_struct *napi, int budget)
-+{
-+	struct dpa_napi_portal *np =
-+			container_of(napi, struct dpa_napi_portal, napi);
-+
-+	int cleaned = qman_p_poll_dqrr(np->p, budget);
-+
-+	if (cleaned < budget) {
-+		int tmp;
-+		napi_complete(napi);
-+		tmp = qman_p_irqsource_add(np->p, QM_PIRQ_DQRI);
-+		DPA_BUG_ON(tmp);
-+	}
-+
-+	return cleaned;
-+}
-+EXPORT_SYMBOL(dpaa_eth_poll);
-+
-+static void __hot _dpa_tx_conf(struct net_device	*net_dev,
-+			  const struct dpa_priv_s	*priv,
-+			  struct dpa_percpu_priv_s	*percpu_priv,
-+			  const struct qm_fd		*fd,
-+			  u32				 fqid)
-+{
-+	struct sk_buff	*skb;
-+
-+	/* do we need the timestamp for the error frames? */
-+
-+	if (unlikely(fd->status & FM_FD_STAT_TX_ERRORS) != 0) {
-+		if (netif_msg_hw(priv) && net_ratelimit())
-+			netdev_warn(net_dev, "FD status = 0x%08x\n",
-+					fd->status & FM_FD_STAT_TX_ERRORS);
-+
-+		percpu_priv->stats.tx_errors++;
-+	}
-+
-+	/* hopefully we need not get the timestamp before the hook */
-+#ifdef CONFIG_FSL_DPAA_HOOKS
-+	if (dpaa_eth_hooks.tx_confirm && dpaa_eth_hooks.tx_confirm(net_dev,
-+		fd, fqid) == DPAA_ETH_STOLEN)
-+		/* it's the hook that must now perform cleanup */
-+		return;
-+#endif
-+	/* This might not perfectly reflect the reality, if the core dequeuing
-+	 * the Tx confirmation is different from the one that did the enqueue,
-+	 * but at least it'll show up in the total count.
-+	 */
-+	percpu_priv->tx_confirm++;
-+
-+	skb = _dpa_cleanup_tx_fd(priv, fd);
-+
-+	dev_kfree_skb(skb);
-+}
-+
-+enum qman_cb_dqrr_result
-+priv_rx_error_dqrr(struct qman_portal		*portal,
-+		      struct qman_fq			*fq,
-+		      const struct qm_dqrr_entry	*dq)
-+{
-+	struct net_device		*net_dev;
-+	struct dpa_priv_s		*priv;
-+	struct dpa_percpu_priv_s	*percpu_priv;
-+	int				*count_ptr;
-+
-+	net_dev = ((struct dpa_fq *)fq)->net_dev;
-+	priv = netdev_priv(net_dev);
-+
-+	percpu_priv = raw_cpu_ptr(priv->percpu_priv);
-+	count_ptr = raw_cpu_ptr(priv->dpa_bp->percpu_count);
-+
-+	if (dpaa_eth_napi_schedule(percpu_priv, portal))
-+		return qman_cb_dqrr_stop;
-+
-+	if (unlikely(dpaa_eth_refill_bpools(priv->dpa_bp, count_ptr)))
-+		/* Unable to refill the buffer pool due to insufficient
-+		 * system memory. Just release the frame back into the pool,
-+		 * otherwise we'll soon end up with an empty buffer pool.
-+		 */
-+		dpa_fd_release(net_dev, &dq->fd);
-+	else
-+		_dpa_rx_error(net_dev, priv, percpu_priv, &dq->fd, fq->fqid);
-+
-+	return qman_cb_dqrr_consume;
-+}
-+
-+
-+enum qman_cb_dqrr_result __hot
-+priv_rx_default_dqrr(struct qman_portal		*portal,
-+			struct qman_fq			*fq,
-+			const struct qm_dqrr_entry	*dq)
-+{
-+	struct net_device		*net_dev;
-+	struct dpa_priv_s		*priv;
-+	struct dpa_percpu_priv_s	*percpu_priv;
-+	int                             *count_ptr;
-+	struct dpa_bp			*dpa_bp;
-+
-+	net_dev = ((struct dpa_fq *)fq)->net_dev;
-+	priv = netdev_priv(net_dev);
-+	dpa_bp = priv->dpa_bp;
-+
-+	/* Trace the Rx fd */
-+	trace_dpa_rx_fd(net_dev, fq, &dq->fd);
-+
-+	/* IRQ handler, non-migratable; safe to use raw_cpu_ptr here */
-+	percpu_priv = raw_cpu_ptr(priv->percpu_priv);
-+	count_ptr = raw_cpu_ptr(dpa_bp->percpu_count);
-+
-+	if (unlikely(dpaa_eth_napi_schedule(percpu_priv, portal)))
-+		return qman_cb_dqrr_stop;
-+
-+	/* Vale of plenty: make sure we didn't run out of buffers */
-+
-+	if (unlikely(dpaa_eth_refill_bpools(dpa_bp, count_ptr)))
-+		/* Unable to refill the buffer pool due to insufficient
-+		 * system memory. Just release the frame back into the pool,
-+		 * otherwise we'll soon end up with an empty buffer pool.
-+		 */
-+		dpa_fd_release(net_dev, &dq->fd);
-+	else
-+		_dpa_rx(net_dev, portal, priv, percpu_priv, &dq->fd, fq->fqid,
-+			count_ptr);
-+
-+	return qman_cb_dqrr_consume;
-+}
-+
-+enum qman_cb_dqrr_result
-+priv_tx_conf_error_dqrr(struct qman_portal		*portal,
-+		      struct qman_fq			*fq,
-+		      const struct qm_dqrr_entry	*dq)
-+{
-+	struct net_device		*net_dev;
-+	struct dpa_priv_s		*priv;
-+	struct dpa_percpu_priv_s	*percpu_priv;
-+
-+	net_dev = ((struct dpa_fq *)fq)->net_dev;
-+	priv = netdev_priv(net_dev);
-+
-+	percpu_priv = raw_cpu_ptr(priv->percpu_priv);
-+
-+	if (dpaa_eth_napi_schedule(percpu_priv, portal))
-+		return qman_cb_dqrr_stop;
-+
-+	_dpa_tx_error(net_dev, priv, percpu_priv, &dq->fd, fq->fqid);
-+
-+	return qman_cb_dqrr_consume;
-+}
-+
-+enum qman_cb_dqrr_result __hot
-+priv_tx_conf_default_dqrr(struct qman_portal		*portal,
-+			struct qman_fq			*fq,
-+			const struct qm_dqrr_entry	*dq)
-+{
-+	struct net_device		*net_dev;
-+	struct dpa_priv_s		*priv;
-+	struct dpa_percpu_priv_s	*percpu_priv;
-+
-+	net_dev = ((struct dpa_fq *)fq)->net_dev;
-+	priv = netdev_priv(net_dev);
-+
-+	/* Trace the fd */
-+	trace_dpa_tx_conf_fd(net_dev, fq, &dq->fd);
-+
-+	/* Non-migratable context, safe to use raw_cpu_ptr */
-+	percpu_priv = raw_cpu_ptr(priv->percpu_priv);
-+
-+	if (dpaa_eth_napi_schedule(percpu_priv, portal))
-+		return qman_cb_dqrr_stop;
-+
-+	_dpa_tx_conf(net_dev, priv, percpu_priv, &dq->fd, fq->fqid);
-+
-+	return qman_cb_dqrr_consume;
-+}
-+
-+void priv_ern(struct qman_portal	*portal,
-+		       struct qman_fq		*fq,
-+		       const struct qm_mr_entry	*msg)
-+{
-+	struct net_device	*net_dev;
-+	const struct dpa_priv_s	*priv;
-+	struct sk_buff *skb;
-+	struct dpa_percpu_priv_s	*percpu_priv;
-+	struct qm_fd fd = msg->ern.fd;
-+
-+	net_dev = ((struct dpa_fq *)fq)->net_dev;
-+	priv = netdev_priv(net_dev);
-+	/* Non-migratable context, safe to use raw_cpu_ptr */
-+	percpu_priv = raw_cpu_ptr(priv->percpu_priv);
-+
-+	percpu_priv->stats.tx_dropped++;
-+	percpu_priv->stats.tx_fifo_errors++;
-+	count_ern(percpu_priv, msg);
-+
-+	/* If we intended this buffer to go into the pool
-+	 * when the FM was done, we need to put it in
-+	 * manually.
-+	 */
-+	if (msg->ern.fd.bpid != 0xff) {
-+		dpa_fd_release(net_dev, &fd);
-+		return;
-+	}
-+
-+	skb = _dpa_cleanup_tx_fd(priv, &fd);
-+	dev_kfree_skb_any(skb);
-+}
-+
-+const struct dpa_fq_cbs_t private_fq_cbs = {
-+	.rx_defq = { .cb = { .dqrr = priv_rx_default_dqrr } },
-+	.tx_defq = { .cb = { .dqrr = priv_tx_conf_default_dqrr } },
-+	.rx_errq = { .cb = { .dqrr = priv_rx_error_dqrr } },
-+	.tx_errq = { .cb = { .dqrr = priv_tx_conf_error_dqrr } },
-+	.egress_ern = { .cb = { .ern = priv_ern } }
-+};
-+EXPORT_SYMBOL(private_fq_cbs);
-+
-+static void dpaa_eth_napi_enable(struct dpa_priv_s *priv)
-+{
-+	struct dpa_percpu_priv_s *percpu_priv;
-+	int i, j;
-+
-+	for_each_possible_cpu(i) {
-+		percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
-+
-+		for (j = 0; j < qman_portal_max; j++)
-+			napi_enable(&percpu_priv->np[j].napi);
-+	}
-+}
-+
-+static void dpaa_eth_napi_disable(struct dpa_priv_s *priv)
-+{
-+	struct dpa_percpu_priv_s *percpu_priv;
-+	int i, j;
-+
-+	for_each_possible_cpu(i) {
-+		percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
-+
-+		for (j = 0; j < qman_portal_max; j++)
-+			napi_disable(&percpu_priv->np[j].napi);
-+	}
-+}
-+
-+static int __cold dpa_eth_priv_start(struct net_device *net_dev)
-+{
-+	int err;
-+	struct dpa_priv_s *priv;
-+
-+	priv = netdev_priv(net_dev);
-+
-+	dpaa_eth_napi_enable(priv);
-+
-+	err = dpa_start(net_dev);
-+	if (err < 0)
-+		dpaa_eth_napi_disable(priv);
-+
-+	return err;
-+}
-+
-+
-+
-+static int __cold dpa_eth_priv_stop(struct net_device *net_dev)
-+{
-+	int _errno;
-+	struct dpa_priv_s *priv;
-+
-+	_errno = dpa_stop(net_dev);
-+	/* Allow NAPI to consume any frame still in the Rx/TxConfirm
-+	 * ingress queues. This is to avoid a race between the current
-+	 * context and ksoftirqd which could leave NAPI disabled while
-+	 * in fact there's still Rx traffic to be processed.
-+	 */
-+	usleep_range(5000, 10000);
-+
-+	priv = netdev_priv(net_dev);
-+	dpaa_eth_napi_disable(priv);
-+
-+	return _errno;
-+}
-+
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void dpaa_eth_poll_controller(struct net_device *net_dev)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(net_dev);
-+	struct dpa_percpu_priv_s *percpu_priv =
-+		raw_cpu_ptr(priv->percpu_priv);
-+	struct qman_portal *p;
-+	const struct qman_portal_config *pc;
-+	struct dpa_napi_portal *np;
-+
-+	p = (struct qman_portal *)qman_get_affine_portal(smp_processor_id());
-+	pc = qman_p_get_portal_config(p);
-+	np = &percpu_priv->np[pc->index];
-+
-+	qman_p_irqsource_remove(np->p, QM_PIRQ_DQRI);
-+	qman_p_poll_dqrr(np->p, np->napi.weight);
-+	qman_p_irqsource_add(np->p, QM_PIRQ_DQRI);
-+}
-+#endif
-+
-+static const struct net_device_ops dpa_private_ops = {
-+	.ndo_open = dpa_eth_priv_start,
-+	.ndo_start_xmit = dpa_tx,
-+	.ndo_stop = dpa_eth_priv_stop,
-+	.ndo_tx_timeout = dpa_timeout,
-+	.ndo_get_stats64 = dpa_get_stats64,
-+	.ndo_set_mac_address = dpa_set_mac_address,
-+	.ndo_validate_addr = eth_validate_addr,
-+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
-+	.ndo_select_queue = dpa_select_queue,
-+#endif
-+	.ndo_change_mtu = dpa_change_mtu,
-+	.ndo_set_rx_mode = dpa_set_rx_mode,
-+	.ndo_init = dpa_ndo_init,
-+	.ndo_set_features = dpa_set_features,
-+	.ndo_fix_features = dpa_fix_features,
-+	.ndo_do_ioctl = dpa_ioctl,
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+	.ndo_poll_controller = dpaa_eth_poll_controller,
-+#endif
-+};
-+
-+static int dpa_private_napi_add(struct net_device *net_dev)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(net_dev);
-+	struct dpa_percpu_priv_s *percpu_priv;
-+	int i, cpu;
-+
-+	for_each_possible_cpu(cpu) {
-+		percpu_priv = per_cpu_ptr(priv->percpu_priv, cpu);
-+
-+		percpu_priv->np = devm_kzalloc(net_dev->dev.parent,
-+			qman_portal_max * sizeof(struct dpa_napi_portal),
-+			GFP_KERNEL);
-+
-+		if (unlikely(percpu_priv->np == NULL)) {
-+			dev_err(net_dev->dev.parent, "devm_kzalloc() failed\n");
-+			return -ENOMEM;
-+		}
-+
-+		for (i = 0; i < qman_portal_max; i++)
-+			netif_napi_add(net_dev, &percpu_priv->np[i].napi,
-+					dpaa_eth_poll, DPA_NAPI_WEIGHT);
-+	}
-+
-+	return 0;
-+}
-+
-+void dpa_private_napi_del(struct net_device *net_dev)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(net_dev);
-+	struct dpa_percpu_priv_s *percpu_priv;
-+	int i, cpu;
-+
-+	for_each_possible_cpu(cpu) {
-+		percpu_priv = per_cpu_ptr(priv->percpu_priv, cpu);
-+
-+		if (percpu_priv->np) {
-+			for (i = 0; i < qman_portal_max; i++)
-+				netif_napi_del(&percpu_priv->np[i].napi);
-+
-+			devm_kfree(net_dev->dev.parent, percpu_priv->np);
-+		}
-+	}
-+}
-+EXPORT_SYMBOL(dpa_private_napi_del);
-+
-+static int dpa_private_netdev_init(struct net_device *net_dev)
-+{
-+	int i;
-+	struct dpa_priv_s *priv = netdev_priv(net_dev);
-+	struct dpa_percpu_priv_s *percpu_priv;
-+	const uint8_t *mac_addr;
-+
-+	/* Although we access another CPU's private data here
-+	 * we do it at initialization so it is safe
-+	 */
-+	for_each_possible_cpu(i) {
-+		percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
-+		percpu_priv->net_dev = net_dev;
-+	}
-+
-+	net_dev->netdev_ops = &dpa_private_ops;
-+	mac_addr = priv->mac_dev->addr;
-+
-+	net_dev->mem_start = priv->mac_dev->res->start;
-+	net_dev->mem_end = priv->mac_dev->res->end;
-+
-+	net_dev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
-+		NETIF_F_LLTX);
-+
-+	/* Advertise S/G and HIGHDMA support for private interfaces */
-+	net_dev->hw_features |= NETIF_F_SG | NETIF_F_HIGHDMA;
-+	/* Recent kernels enable GSO automatically, if
-+	 * we declare NETIF_F_SG. For conformity, we'll
-+	 * still declare GSO explicitly.
-+	 */
-+	net_dev->features |= NETIF_F_GSO;
-+
-+	/* Advertise GRO support */
-+	net_dev->features |= NETIF_F_GRO;
-+
-+	return dpa_netdev_init(net_dev, mac_addr, tx_timeout);
-+}
-+
-+static struct dpa_bp * __cold
-+dpa_priv_bp_probe(struct device *dev)
-+{
-+	struct dpa_bp *dpa_bp;
-+
-+	dpa_bp = devm_kzalloc(dev, sizeof(*dpa_bp), GFP_KERNEL);
-+	if (unlikely(dpa_bp == NULL)) {
-+		dev_err(dev, "devm_kzalloc() failed\n");
-+		return ERR_PTR(-ENOMEM);
-+	}
-+
-+	dpa_bp->percpu_count = devm_alloc_percpu(dev, *dpa_bp->percpu_count);
-+	dpa_bp->target_count = CONFIG_FSL_DPAA_ETH_MAX_BUF_COUNT;
-+
-+	dpa_bp->seed_cb = dpa_bp_priv_seed;
-+	dpa_bp->free_buf_cb = _dpa_bp_free_pf;
-+
-+	return dpa_bp;
-+}
-+
-+/* Place all ingress FQs (Rx Default, Rx Error, PCD FQs) in a dedicated CGR.
-+ * We won't be sending congestion notifications to FMan; for now, we just use
-+ * this CGR to generate enqueue rejections to FMan in order to drop the frames
-+ * before they reach our ingress queues and eat up memory.
-+ */
-+static int dpaa_eth_priv_ingress_cgr_init(struct dpa_priv_s *priv)
-+{
-+	struct qm_mcc_initcgr initcgr;
-+	u32 cs_th;
-+	int err;
-+
-+	err = qman_alloc_cgrid(&priv->ingress_cgr.cgrid);
-+	if (err < 0) {
-+		pr_err("Error %d allocating CGR ID\n", err);
-+		goto out_error;
-+	}
-+
-+	/* Enable CS TD, but disable Congestion State Change Notifications. */
-+	initcgr.we_mask = QM_CGR_WE_CS_THRES;
-+	initcgr.cgr.cscn_en = QM_CGR_EN;
-+	cs_th = CONFIG_FSL_DPAA_INGRESS_CS_THRESHOLD;
-+	qm_cgr_cs_thres_set64(&initcgr.cgr.cs_thres, cs_th, 1);
-+
-+	initcgr.we_mask |= QM_CGR_WE_CSTD_EN;
-+	initcgr.cgr.cstd_en = QM_CGR_EN;
-+
-+	/* This is actually a hack, because this CGR will be associated with
-+	 * our affine SWP. However, we'll place our ingress FQs in it.
-+	 */
-+	err = qman_create_cgr(&priv->ingress_cgr, QMAN_CGR_FLAG_USE_INIT,
-+		&initcgr);
-+	if (err < 0) {
-+		pr_err("Error %d creating ingress CGR with ID %d\n", err,
-+			priv->ingress_cgr.cgrid);
-+		qman_release_cgrid(priv->ingress_cgr.cgrid);
-+		goto out_error;
-+	}
-+	pr_debug("Created ingress CGR %d for netdev with hwaddr %pM\n",
-+		 priv->ingress_cgr.cgrid, priv->mac_dev->addr);
-+
-+	/* struct qman_cgr allows special cgrid values (i.e. outside the 0..255
-+	 * range), but we have no common initialization path between the
-+	 * different variants of the DPAA Eth driver, so we do it here rather
-+	 * than modifying every other variant than "private Eth".
-+	 */
-+	priv->use_ingress_cgr = true;
-+
-+out_error:
-+	return err;
-+}
-+
-+static int dpa_priv_bp_create(struct net_device *net_dev, struct dpa_bp *dpa_bp,
-+		size_t count)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(net_dev);
-+	int i;
-+
-+	if (netif_msg_probe(priv))
-+		dev_dbg(net_dev->dev.parent,
-+			"Using private BM buffer pools\n");
-+
-+	priv->bp_count = count;
-+
-+	for (i = 0; i < count; i++) {
-+		int err;
-+		err = dpa_bp_alloc(&dpa_bp[i]);
-+		if (err < 0) {
-+			dpa_bp_free(priv);
-+			priv->dpa_bp = NULL;
-+			return err;
-+		}
-+
-+		priv->dpa_bp = &dpa_bp[i];
-+	}
-+
-+	dpa_priv_common_bpid = priv->dpa_bp->bpid;
-+	return 0;
-+}
-+
-+static const struct of_device_id dpa_match[];
-+
-+#ifdef CONFIG_FSL_DPAA_DBG_LOOP
-+static int dpa_new_loop_id(void)
-+{
-+	static int if_id;
-+
-+	return if_id++;
-+}
-+#endif
-+
-+static int
-+dpaa_eth_priv_probe(struct platform_device *_of_dev)
-+{
-+	int err = 0, i, channel;
-+	struct device *dev;
-+	struct device_node *dpa_node;
-+	struct dpa_bp *dpa_bp;
-+	size_t count = 1;
-+	struct net_device *net_dev = NULL;
-+	struct dpa_priv_s *priv = NULL;
-+	struct dpa_percpu_priv_s *percpu_priv;
-+	struct fm_port_fqs port_fqs;
-+	struct dpa_buffer_layout_s *buf_layout = NULL;
-+	struct mac_device *mac_dev;
-+
-+	dev = &_of_dev->dev;
-+
-+	dpa_node = dev->of_node;
-+
-+	if (!of_device_is_available(dpa_node))
-+		return -ENODEV;
-+
-+	/* Get the buffer pools assigned to this interface;
-+	 * run only once the default pool probing code
-+	 */
-+	dpa_bp = (dpa_bpid2pool(dpa_priv_common_bpid)) ? :
-+			dpa_priv_bp_probe(dev);
-+	if (IS_ERR(dpa_bp))
-+		return PTR_ERR(dpa_bp);
-+
-+	/* Allocate this early, so we can store relevant information in
-+	 * the private area (needed by 1588 code in dpa_mac_probe)
-+	 */
-+	net_dev = alloc_etherdev_mq(sizeof(*priv), DPAA_ETH_TX_QUEUES);
-+	if (!net_dev) {
-+		dev_err(dev, "alloc_etherdev_mq() failed\n");
-+		goto alloc_etherdev_mq_failed;
-+	}
-+
-+	/* Do this here, so we can be verbose early */
-+	SET_NETDEV_DEV(net_dev, dev);
-+	dev_set_drvdata(dev, net_dev);
-+
-+	priv = netdev_priv(net_dev);
-+	priv->net_dev = net_dev;
-+	strcpy(priv->if_type, "private");
-+
-+	priv->msg_enable = netif_msg_init(debug, -1);
-+
-+#ifdef CONFIG_FSL_DPAA_DBG_LOOP
-+	priv->loop_id = dpa_new_loop_id();
-+	priv->loop_to = -1; /* disabled by default */
-+	dpa_loop_netdevs[priv->loop_id] = net_dev;
-+#endif
-+
-+	mac_dev = dpa_mac_probe(_of_dev);
-+	if (IS_ERR(mac_dev) || !mac_dev) {
-+		err = PTR_ERR(mac_dev);
-+		goto mac_probe_failed;
-+	}
-+
-+	/* We have physical ports, so we need to establish
-+	 * the buffer layout.
-+	 */
-+	buf_layout = devm_kzalloc(dev, 2 * sizeof(*buf_layout),
-+				  GFP_KERNEL);
-+	if (!buf_layout) {
-+		dev_err(dev, "devm_kzalloc() failed\n");
-+		goto alloc_failed;
-+	}
-+	dpa_set_buffers_layout(mac_dev, buf_layout);
-+
-+	/* For private ports, need to compute the size of the default
-+	 * buffer pool, based on FMan port buffer layout;also update
-+	 * the maximum buffer size for private ports if necessary
-+	 */
-+	dpa_bp->size = dpa_bp_size(&buf_layout[RX]);
-+
-+#ifdef CONFIG_FSL_DPAA_ETH_JUMBO_FRAME
-+	/* We only want to use jumbo frame optimization if we actually have
-+	 * L2 MAX FRM set for jumbo frames as well.
-+	 */
-+#ifndef CONFIG_PPC
-+	if (likely(!dpaa_errata_a010022))
-+#endif
-+	if(fm_get_max_frm() < 9600)
-+		dev_warn(dev,
-+			"Invalid configuration: if jumbo frames support is on, FSL_FM_MAX_FRAME_SIZE should be set to 9600\n");
-+#endif
-+
-+	INIT_LIST_HEAD(&priv->dpa_fq_list);
-+
-+	memset(&port_fqs, 0, sizeof(port_fqs));
-+
-+	err = dpa_fq_probe_mac(dev, &priv->dpa_fq_list, &port_fqs, true, RX);
-+	if (!err)
-+		err = dpa_fq_probe_mac(dev, &priv->dpa_fq_list,
-+				       &port_fqs, true, TX);
-+
-+	if (err < 0)
-+		goto fq_probe_failed;
-+
-+	/* bp init */
-+
-+	err = dpa_priv_bp_create(net_dev, dpa_bp, count);
-+
-+	if (err < 0)
-+		goto bp_create_failed;
-+
-+	priv->mac_dev = mac_dev;
-+
-+	channel = dpa_get_channel();
-+
-+	if (channel < 0) {
-+		err = channel;
-+		goto get_channel_failed;
-+	}
-+
-+	priv->channel = (uint16_t)channel;
-+	dpaa_eth_add_channel(priv->channel);
-+
-+	dpa_fq_setup(priv, &private_fq_cbs, priv->mac_dev->port_dev[TX]);
-+
-+	/* Create a congestion group for this netdev, with
-+	 * dynamically-allocated CGR ID.
-+	 * Must be executed after probing the MAC, but before
-+	 * assigning the egress FQs to the CGRs.
-+	 */
-+	err = dpaa_eth_cgr_init(priv);
-+	if (err < 0) {
-+		dev_err(dev, "Error initializing CGR\n");
-+		goto tx_cgr_init_failed;
-+	}
-+	err = dpaa_eth_priv_ingress_cgr_init(priv);
-+	if (err < 0) {
-+		dev_err(dev, "Error initializing ingress CGR\n");
-+		goto rx_cgr_init_failed;
-+	}
-+
-+	/* Add the FQs to the interface, and make them active */
-+	err = dpa_fqs_init(dev,  &priv->dpa_fq_list, false);
-+	if (err < 0)
-+		goto fq_alloc_failed;
-+
-+	priv->buf_layout = buf_layout;
-+	priv->tx_headroom = dpa_get_headroom(&priv->buf_layout[TX]);
-+	priv->rx_headroom = dpa_get_headroom(&priv->buf_layout[RX]);
-+
-+	/* All real interfaces need their ports initialized */
-+	dpaa_eth_init_ports(mac_dev, dpa_bp, count, &port_fqs,
-+			buf_layout, dev);
-+
-+#ifdef CONFIG_FMAN_PFC
-+	for (i = 0; i < CONFIG_FMAN_PFC_COS_COUNT; i++) {
-+		err = fm_port_set_pfc_priorities_mapping_to_qman_wq(
-+				mac_dev->port_dev[TX], i, i);
-+		if (unlikely(err != 0)) {
-+			dev_err(dev, "Error maping PFC %u to WQ %u\n", i, i);
-+			goto pfc_mapping_failed;
-+		}
-+	}
-+#endif
-+
-+	priv->percpu_priv = devm_alloc_percpu(dev, *priv->percpu_priv);
-+
-+	if (priv->percpu_priv == NULL) {
-+		dev_err(dev, "devm_alloc_percpu() failed\n");
-+		err = -ENOMEM;
-+		goto alloc_percpu_failed;
-+	}
-+	for_each_possible_cpu(i) {
-+		percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
-+		memset(percpu_priv, 0, sizeof(*percpu_priv));
-+	}
-+
-+	/* Initialize NAPI */
-+	err = dpa_private_napi_add(net_dev);
-+
-+	if (err < 0)
-+		goto napi_add_failed;
-+
-+	err = dpa_private_netdev_init(net_dev);
-+
-+	if (err < 0)
-+		goto netdev_init_failed;
-+
-+	dpaa_eth_sysfs_init(&net_dev->dev);
-+
-+#ifdef CONFIG_PM
-+	device_set_wakeup_capable(dev, true);
-+#endif
-+
-+	pr_info("fsl_dpa: Probed interface %s\n", net_dev->name);
-+
-+	return 0;
-+
-+netdev_init_failed:
-+napi_add_failed:
-+	dpa_private_napi_del(net_dev);
-+alloc_percpu_failed:
-+#ifdef CONFIG_FMAN_PFC
-+pfc_mapping_failed:
-+#endif
-+	dpa_fq_free(dev, &priv->dpa_fq_list);
-+fq_alloc_failed:
-+	qman_delete_cgr_safe(&priv->ingress_cgr);
-+	qman_release_cgrid(priv->ingress_cgr.cgrid);
-+rx_cgr_init_failed:
-+	qman_delete_cgr_safe(&priv->cgr_data.cgr);
-+	qman_release_cgrid(priv->cgr_data.cgr.cgrid);
-+tx_cgr_init_failed:
-+get_channel_failed:
-+	dpa_bp_free(priv);
-+bp_create_failed:
-+fq_probe_failed:
-+alloc_failed:
-+mac_probe_failed:
-+	dev_set_drvdata(dev, NULL);
-+	free_netdev(net_dev);
-+alloc_etherdev_mq_failed:
-+	if (atomic_read(&dpa_bp->refs) == 0)
-+		devm_kfree(dev, dpa_bp);
-+
-+	return err;
-+}
-+
-+static const struct of_device_id dpa_match[] = {
-+	{
-+		.compatible	= "fsl,dpa-ethernet"
-+	},
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, dpa_match);
-+
-+static struct platform_driver dpa_driver = {
-+	.driver = {
-+		.name		= KBUILD_MODNAME,
-+		.of_match_table	= dpa_match,
-+		.owner		= THIS_MODULE,
-+		.pm		= DPAA_PM_OPS,
-+	},
-+	.probe		= dpaa_eth_priv_probe,
-+	.remove		= dpa_remove
-+};
-+
-+#ifndef CONFIG_PPC
-+static bool __init __cold soc_has_errata_a010022(void)
-+{
-+#ifdef CONFIG_SOC_BUS
-+	const struct soc_device_attribute soc_msi_matches[] = {
-+		{ .family = "QorIQ LS1043A",
-+		  .data = NULL },
-+		{ },
-+	};
-+
-+	if (soc_device_match(soc_msi_matches))
-+		return true;
-+
-+	return false;
-+#else
-+	return true; /* cannot identify SoC */
-+#endif
-+}
-+#endif
-+
-+static int __init __cold dpa_load(void)
-+{
-+	int	 _errno;
-+
-+	pr_info(DPA_DESCRIPTION "\n");
-+
-+#ifdef CONFIG_FSL_DPAA_DBG_LOOP
-+	dpa_debugfs_module_init();
-+#endif /* CONFIG_FSL_DPAA_DBG_LOOP */
-+
-+	/* initialise dpaa_eth mirror values */
-+	dpa_rx_extra_headroom = fm_get_rx_extra_headroom();
-+	dpa_max_frm = fm_get_max_frm();
-+	dpa_num_cpus = num_possible_cpus();
-+
-+#ifndef CONFIG_PPC
-+	/* Detect if the current SoC requires the 4K alignment workaround */
-+	dpaa_errata_a010022 = soc_has_errata_a010022();
-+#endif
-+
-+#ifdef CONFIG_FSL_DPAA_DBG_LOOP
-+	memset(dpa_loop_netdevs, 0, sizeof(dpa_loop_netdevs));
-+#endif
-+
-+	_errno = platform_driver_register(&dpa_driver);
-+	if (unlikely(_errno < 0)) {
-+		pr_err(KBUILD_MODNAME
-+			": %s:%hu:%s(): platform_driver_register() = %d\n",
-+			KBUILD_BASENAME".c", __LINE__, __func__, _errno);
-+	}
-+
-+	pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
-+		KBUILD_BASENAME".c", __func__);
-+
-+	return _errno;
-+}
-+module_init(dpa_load);
-+
-+static void __exit __cold dpa_unload(void)
-+{
-+	pr_debug(KBUILD_MODNAME ": -> %s:%s()\n",
-+		KBUILD_BASENAME".c", __func__);
-+
-+	platform_driver_unregister(&dpa_driver);
-+
-+#ifdef CONFIG_FSL_DPAA_DBG_LOOP
-+	dpa_debugfs_module_exit();
-+#endif /* CONFIG_FSL_DPAA_DBG_LOOP */
-+
-+	/* Only one channel is used and needs to be relased after all
-+	 * interfaces are removed
-+	 */
-+	dpa_release_channel();
-+
-+	pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
-+		KBUILD_BASENAME".c", __func__);
-+}
-+module_exit(dpa_unload);
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-@@ -0,0 +1,697 @@
-+/* Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __DPA_H
-+#define __DPA_H
-+
-+#include <linux/netdevice.h>
-+#include <linux/fsl_qman.h>	/* struct qman_fq */
-+
-+#include "fm_ext.h"
-+#include "dpaa_eth_trace.h"
-+
-+extern int dpa_rx_extra_headroom;
-+extern int dpa_max_frm;
-+extern int dpa_num_cpus;
-+
-+#define dpa_get_rx_extra_headroom() dpa_rx_extra_headroom
-+#define dpa_get_max_frm() dpa_max_frm
-+
-+#define dpa_get_max_mtu()	\
-+	(dpa_get_max_frm() - (VLAN_ETH_HLEN + ETH_FCS_LEN))
-+
-+#define __hot
-+
-+/* Simple enum of FQ types - used for array indexing */
-+enum port_type {RX, TX};
-+
-+/* TODO: This structure should be renamed & moved to the FMD wrapper */
-+struct dpa_buffer_layout_s {
-+	uint16_t	priv_data_size;
-+	bool		parse_results;
-+	bool		time_stamp;
-+	bool		hash_results;
-+	uint8_t		manip_extra_space;
-+	uint16_t	data_align;
-+};
-+
-+#ifdef CONFIG_FSL_DPAA_ETH_DEBUG
-+#define DPA_BUG_ON(cond)	BUG_ON(cond)
-+#else
-+#define DPA_BUG_ON(cond)
-+#endif
-+
-+#define DPA_TX_PRIV_DATA_SIZE	16
-+#define DPA_PARSE_RESULTS_SIZE sizeof(fm_prs_result_t)
-+#define DPA_TIME_STAMP_SIZE 8
-+#define DPA_HASH_RESULTS_SIZE 8
-+#define DPA_RX_PRIV_DATA_SIZE   (DPA_TX_PRIV_DATA_SIZE + \
-+					dpa_get_rx_extra_headroom())
-+
-+#define FM_FD_STAT_RX_ERRORS						\
-+	(FM_PORT_FRM_ERR_DMA | FM_PORT_FRM_ERR_PHYSICAL	| \
-+	 FM_PORT_FRM_ERR_SIZE | FM_PORT_FRM_ERR_CLS_DISCARD | \
-+	 FM_PORT_FRM_ERR_EXTRACTION | FM_PORT_FRM_ERR_NO_SCHEME	| \
-+	 FM_PORT_FRM_ERR_ILL_PLCR | FM_PORT_FRM_ERR_PRS_TIMEOUT	| \
-+	 FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT | FM_PORT_FRM_ERR_PRS_HDR_ERR)
-+
-+#define FM_FD_STAT_TX_ERRORS \
-+	(FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT | \
-+	 FM_PORT_FRM_ERR_LENGTH | FM_PORT_FRM_ERR_DMA)
-+
-+#ifndef CONFIG_FSL_DPAA_ETH_JUMBO_FRAME
-+/* The raw buffer size must be cacheline aligned.
-+ * Normally we use 2K buffers.
-+ */
-+#define DPA_BP_RAW_SIZE		2048
-+#else
-+/* For jumbo frame optimizations, use buffers large enough to accommodate
-+ * 9.6K frames, FD maximum offset, skb sh_info overhead and some extra
-+ * space to account for further alignments.
-+ */
-+#define DPA_MAX_FRM_SIZE	9600
-+#ifdef CONFIG_PPC
-+#define DPA_BP_RAW_SIZE \
-+	((DPA_MAX_FRM_SIZE + DPA_MAX_FD_OFFSET + \
-+	  sizeof(struct skb_shared_info) + 128) & ~(SMP_CACHE_BYTES - 1))
-+#else /* CONFIG_PPC */
-+#define DPA_BP_RAW_SIZE ((unlikely(dpaa_errata_a010022)) ? 2048 : \
-+	((DPA_MAX_FRM_SIZE + DPA_MAX_FD_OFFSET + \
-+	  sizeof(struct skb_shared_info) + 128) & ~(SMP_CACHE_BYTES - 1)))
-+#endif /* CONFIG_PPC */
-+#endif /* CONFIG_FSL_DPAA_ETH_JUMBO_FRAME */
-+
-+/* This is what FMan is ever allowed to use.
-+ * FMan-DMA requires 16-byte alignment for Rx buffers, but SKB_DATA_ALIGN is
-+ * even stronger (SMP_CACHE_BYTES-aligned), so we just get away with that,
-+ * via SKB_WITH_OVERHEAD(). We can't rely on netdev_alloc_frag() giving us
-+ * half-page-aligned buffers (can we?), so we reserve some more space
-+ * for start-of-buffer alignment.
-+ */
-+#define dpa_bp_size(buffer_layout)	(SKB_WITH_OVERHEAD(DPA_BP_RAW_SIZE) - \
-+						SMP_CACHE_BYTES)
-+/* We must ensure that skb_shinfo is always cacheline-aligned. */
-+#define DPA_SKB_SIZE(size)	((size) & ~(SMP_CACHE_BYTES - 1))
-+
-+/* Maximum size of a buffer for which recycling is allowed.
-+ * We need an upper limit such that forwarded skbs that get reallocated on Tx
-+ * aren't allowed to grow unboundedly. On the other hand, we need to make sure
-+ * that skbs allocated by us will not fail to be recycled due to their size.
-+ *
-+ * For a requested size, the kernel allocator provides the next power of two
-+ * sized block, which the stack will use as is, regardless of the actual size
-+ * it required; since we must accommodate at most 9.6K buffers (L2 maximum
-+ * supported frame size), set the recycling upper limit to 16K.
-+ */
-+#define DPA_RECYCLE_MAX_SIZE	16384
-+
-+#if defined(CONFIG_FSL_SDK_FMAN_TEST)
-+/*TODO: temporary for fman pcd testing */
-+#define FMAN_PCD_TESTS_MAX_NUM_RANGES	20
-+#endif
-+
-+#define DPAA_ETH_FQ_DELTA	0x10000
-+
-+#define DPAA_ETH_PCD_FQ_BASE(device_addr) \
-+	(((device_addr) & 0x1fffff) >> 6)
-+
-+#define DPAA_ETH_PCD_FQ_HI_PRIO_BASE(device_addr) \
-+	(DPAA_ETH_FQ_DELTA + DPAA_ETH_PCD_FQ_BASE(device_addr))
-+
-+/* Largest value that the FQD's OAL field can hold.
-+ * This is DPAA-1.x specific.
-+ * TODO: This rather belongs in fsl_qman.h
-+ */
-+#define FSL_QMAN_MAX_OAL	127
-+
-+/* Maximum offset value for a contig or sg FD (represented on 9 bits) */
-+#define DPA_MAX_FD_OFFSET	((1 << 9) - 1)
-+
-+/* Default alignment for start of data in an Rx FD */
-+#define DPA_FD_DATA_ALIGNMENT  16
-+
-+/* Values for the L3R field of the FM Parse Results
-+ */
-+/* L3 Type field: First IP Present IPv4 */
-+#define FM_L3_PARSE_RESULT_IPV4	0x8000
-+/* L3 Type field: First IP Present IPv6 */
-+#define FM_L3_PARSE_RESULT_IPV6	0x4000
-+
-+/* Values for the L4R field of the FM Parse Results
-+ * See $8.8.4.7.20 - L4 HXS - L4 Results from DPAA-Rev2 Reference Manual.
-+ */
-+/* L4 Type field: UDP */
-+#define FM_L4_PARSE_RESULT_UDP	0x40
-+/* L4 Type field: TCP */
-+#define FM_L4_PARSE_RESULT_TCP	0x20
-+/* FD status field indicating whether the FM Parser has attempted to validate
-+ * the L4 csum of the frame.
-+ * Note that having this bit set doesn't necessarily imply that the checksum
-+ * is valid. One would have to check the parse results to find that out.
-+ */
-+#define FM_FD_STAT_L4CV		0x00000004
-+
-+
-+#define FM_FD_STAT_ERR_PHYSICAL	FM_PORT_FRM_ERR_PHYSICAL
-+
-+/* Check if the parsed frame was found to be a TCP segment.
-+ *
-+ * @parse_result_ptr must be of type (fm_prs_result_t *).
-+ */
-+#define fm_l4_frame_is_tcp(parse_result_ptr) \
-+	((parse_result_ptr)->l4r & FM_L4_PARSE_RESULT_TCP)
-+
-+/* number of Tx queues to FMan */
-+#ifdef CONFIG_FMAN_PFC
-+#define DPAA_ETH_TX_QUEUES	(NR_CPUS * CONFIG_FMAN_PFC_COS_COUNT)
-+#else
-+#define DPAA_ETH_TX_QUEUES	NR_CPUS
-+#endif
-+
-+#define DPAA_ETH_RX_QUEUES	128
-+
-+/* Convenience macros for storing/retrieving the skb back-pointers. They must
-+ * accommodate both recycling and confirmation paths - i.e. cases when the buf
-+ * was allocated by ourselves, respectively by the stack. In the former case,
-+ * we could store the skb at negative offset; in the latter case, we can't,
-+ * so we'll use 0 as offset.
-+ *
-+ * NB: @off is an offset from a (struct sk_buff **) pointer!
-+ */
-+#define DPA_WRITE_SKB_PTR(skb, skbh, addr, off) \
-+{ \
-+	skbh = (struct sk_buff **)addr; \
-+	*(skbh + (off)) = skb; \
-+}
-+#define DPA_READ_SKB_PTR(skb, skbh, addr, off) \
-+{ \
-+	skbh = (struct sk_buff **)addr; \
-+	skb = *(skbh + (off)); \
-+}
-+
-+#ifdef CONFIG_PM
-+/* Magic Packet wakeup */
-+#define DPAA_WOL_MAGIC		0x00000001
-+#endif
-+
-+#if defined(CONFIG_FSL_SDK_FMAN_TEST)
-+struct pcd_range {
-+	uint32_t			 base;
-+	uint32_t			 count;
-+};
-+#endif
-+
-+/* More detailed FQ types - used for fine-grained WQ assignments */
-+enum dpa_fq_type {
-+	FQ_TYPE_RX_DEFAULT = 1, /* Rx Default FQs */
-+	FQ_TYPE_RX_ERROR,       /* Rx Error FQs */
-+	FQ_TYPE_RX_PCD,         /* User-defined PCDs */
-+	FQ_TYPE_TX,             /* "Real" Tx FQs */
-+	FQ_TYPE_TX_CONFIRM,     /* Tx default Conf FQ (actually an Rx FQ) */
-+	FQ_TYPE_TX_CONF_MQ,     /* Tx conf FQs (one for each Tx FQ) */
-+	FQ_TYPE_TX_ERROR,       /* Tx Error FQs (these are actually Rx FQs) */
-+	FQ_TYPE_RX_PCD_HI_PRIO, /* User-defined high-priority PCDs */
-+};
-+
-+struct dpa_fq {
-+	struct qman_fq		 fq_base;
-+	struct list_head	 list;
-+	struct net_device	*net_dev;
-+	bool			 init;
-+	uint32_t fqid;
-+	uint32_t flags;
-+	uint16_t channel;
-+	uint8_t wq;
-+	enum dpa_fq_type fq_type;
-+};
-+
-+struct dpa_fq_cbs_t {
-+	struct qman_fq rx_defq;
-+	struct qman_fq tx_defq;
-+	struct qman_fq rx_errq;
-+	struct qman_fq tx_errq;
-+	struct qman_fq egress_ern;
-+};
-+
-+struct fqid_cell {
-+	uint32_t start;
-+	uint32_t count;
-+};
-+
-+struct dpa_bp {
-+	struct bman_pool		*pool;
-+	uint8_t				bpid;
-+	struct device			*dev;
-+	union {
-+		/* The buffer pools used for the private ports are initialized
-+		 * with target_count buffers for each CPU; at runtime the
-+		 * number of buffers per CPU is constantly brought back to this
-+		 * level
-+		 */
-+		int target_count;
-+		/* The configured value for the number of buffers in the pool,
-+		 * used for shared port buffer pools
-+		 */
-+		int config_count;
-+	};
-+	size_t				size;
-+	bool				seed_pool;
-+	/* physical address of the contiguous memory used by the pool to store
-+	 * the buffers
-+	 */
-+	dma_addr_t			paddr;
-+	/* virtual address of the contiguous memory used by the pool to store
-+	 * the buffers
-+	 */
-+	void __iomem			*vaddr;
-+	/* current number of buffers in the bpool alloted to this CPU */
-+	int __percpu *percpu_count;
-+	atomic_t refs;
-+	/* some bpools need to be seeded before use by this cb */
-+	int (*seed_cb)(struct dpa_bp *);
-+	/* some bpools need to be emptied before freeing; this cb is used
-+	 * for freeing of individual buffers taken from the pool
-+	 */
-+	void (*free_buf_cb)(void *addr);
-+};
-+
-+struct dpa_rx_errors {
-+	u64 dme;		/* DMA Error */
-+	u64 fpe;		/* Frame Physical Error */
-+	u64 fse;		/* Frame Size Error */
-+	u64 phe;		/* Header Error */
-+	u64 cse;		/* Checksum Validation Error */
-+};
-+
-+/* Counters for QMan ERN frames - one counter per rejection code */
-+struct dpa_ern_cnt {
-+	u64 cg_tdrop;		/* Congestion group taildrop */
-+	u64 wred;		/* WRED congestion */
-+	u64 err_cond;		/* Error condition */
-+	u64 early_window;	/* Order restoration, frame too early */
-+	u64 late_window;	/* Order restoration, frame too late */
-+	u64 fq_tdrop;		/* FQ taildrop */
-+	u64 fq_retired;		/* FQ is retired */
-+	u64 orp_zero;		/* ORP disabled */
-+};
-+
-+struct dpa_napi_portal {
-+	struct napi_struct napi;
-+	struct qman_portal *p;
-+};
-+
-+struct dpa_percpu_priv_s {
-+	struct net_device *net_dev;
-+	struct dpa_napi_portal *np;
-+	u64 in_interrupt;
-+	u64 tx_returned;
-+	u64 tx_confirm;
-+	/* fragmented (non-linear) skbuffs received from the stack */
-+	u64 tx_frag_skbuffs;
-+	/* number of S/G frames received */
-+	u64 rx_sg;
-+
-+	struct rtnl_link_stats64 stats;
-+	struct dpa_rx_errors rx_errors;
-+	struct dpa_ern_cnt ern_cnt;
-+};
-+
-+struct dpa_priv_s {
-+	struct dpa_percpu_priv_s	__percpu *percpu_priv;
-+	struct dpa_bp *dpa_bp;
-+	/* Store here the needed Tx headroom for convenience and speed
-+	 * (even though it can be computed based on the fields of buf_layout)
-+	 */
-+	uint16_t tx_headroom;
-+	struct net_device *net_dev;
-+	struct mac_device	*mac_dev;
-+	struct qman_fq		*egress_fqs[DPAA_ETH_TX_QUEUES];
-+	struct qman_fq		*conf_fqs[DPAA_ETH_TX_QUEUES];
-+
-+	size_t bp_count;
-+
-+	uint16_t		 channel;	/* "fsl,qman-channel-id" */
-+	struct list_head	 dpa_fq_list;
-+
-+#ifdef CONFIG_FSL_DPAA_DBG_LOOP
-+	struct dentry		*debugfs_loop_file;
-+#endif
-+
-+	uint32_t		 msg_enable;	/* net_device message level */
-+#ifdef CONFIG_FSL_DPAA_1588
-+	struct dpa_ptp_tsu	 *tsu;
-+#endif
-+
-+#if defined(CONFIG_FSL_SDK_FMAN_TEST)
-+/* TODO: this is temporary until pcd support is implemented in dpaa */
-+	int			priv_pcd_num_ranges;
-+	struct pcd_range	priv_pcd_ranges[FMAN_PCD_TESTS_MAX_NUM_RANGES];
-+#endif
-+
-+	struct {
-+		/**
-+		 * All egress queues to a given net device belong to one
-+		 * (and the same) congestion group.
-+		 */
-+		struct qman_cgr cgr;
-+		/* If congested, when it began. Used for performance stats. */
-+		u32 congestion_start_jiffies;
-+		/* Number of jiffies the Tx port was congested. */
-+		u32 congested_jiffies;
-+		/**
-+		 * Counter for the number of times the CGR
-+		 * entered congestion state
-+		 */
-+		u32 cgr_congested_count;
-+	} cgr_data;
-+	/* Use a per-port CGR for ingress traffic. */
-+	bool use_ingress_cgr;
-+	struct qman_cgr ingress_cgr;
-+
-+#ifdef CONFIG_FSL_DPAA_TS
-+	bool ts_tx_en; /* Tx timestamping enabled */
-+	bool ts_rx_en; /* Rx timestamping enabled */
-+#endif /* CONFIG_FSL_DPAA_TS */
-+
-+	struct dpa_buffer_layout_s *buf_layout;
-+	uint16_t rx_headroom;
-+	char if_type[30];
-+
-+	void *peer;
-+#ifdef CONFIG_PM
-+	u32 wol;
-+#endif
-+#ifdef CONFIG_FSL_DPAA_DBG_LOOP
-+	int loop_id;
-+	int loop_to;
-+#endif
-+#ifdef CONFIG_FSL_DPAA_CEETM
-+	bool ceetm_en; /* CEETM QoS enabled */
-+#endif
-+};
-+
-+struct fm_port_fqs {
-+	struct dpa_fq *tx_defq;
-+	struct dpa_fq *tx_errq;
-+	struct dpa_fq *rx_defq;
-+	struct dpa_fq *rx_errq;
-+};
-+
-+
-+#ifdef CONFIG_FSL_DPAA_DBG_LOOP
-+extern struct net_device *dpa_loop_netdevs[20];
-+#endif
-+
-+/* functions with different implementation for SG and non-SG: */
-+int dpa_bp_priv_seed(struct dpa_bp *dpa_bp);
-+int dpaa_eth_refill_bpools(struct dpa_bp *dpa_bp, int *count_ptr);
-+void __hot _dpa_rx(struct net_device *net_dev,
-+		struct qman_portal *portal,
-+		const struct dpa_priv_s *priv,
-+		struct dpa_percpu_priv_s *percpu_priv,
-+		const struct qm_fd *fd,
-+		u32 fqid,
-+		int *count_ptr);
-+int __hot dpa_tx(struct sk_buff *skb, struct net_device *net_dev);
-+int __hot dpa_tx_extended(struct sk_buff *skb, struct net_device *net_dev,
-+		struct qman_fq *egress_fq, struct qman_fq *conf_fq);
-+struct sk_buff *_dpa_cleanup_tx_fd(const struct dpa_priv_s *priv,
-+				   const struct qm_fd *fd);
-+void __hot _dpa_process_parse_results(const fm_prs_result_t *parse_results,
-+				      const struct qm_fd *fd,
-+				      struct sk_buff *skb,
-+				      int *use_gro);
-+#ifndef CONFIG_FSL_DPAA_TS
-+bool dpa_skb_is_recyclable(struct sk_buff *skb);
-+bool dpa_buf_is_recyclable(struct sk_buff *skb,
-+			   uint32_t min_size,
-+			   uint16_t min_offset,
-+			   unsigned char **new_buf_start);
-+#endif
-+int __hot skb_to_contig_fd(struct dpa_priv_s *priv,
-+			   struct sk_buff *skb, struct qm_fd *fd,
-+			   int *count_ptr, int *offset);
-+int __hot skb_to_sg_fd(struct dpa_priv_s *priv,
-+		       struct sk_buff *skb, struct qm_fd *fd);
-+int __cold __attribute__((nonnull))
-+	_dpa_fq_free(struct device *dev, struct qman_fq *fq);
-+
-+/* Turn on HW checksum computation for this outgoing frame.
-+ * If the current protocol is not something we support in this regard
-+ * (or if the stack has already computed the SW checksum), we do nothing.
-+ *
-+ * Returns 0 if all goes well (or HW csum doesn't apply), and a negative value
-+ * otherwise.
-+ *
-+ * Note that this function may modify the fd->cmd field and the skb data buffer
-+ * (the Parse Results area).
-+ */
-+int dpa_enable_tx_csum(struct dpa_priv_s *priv,
-+	struct sk_buff *skb, struct qm_fd *fd, char *parse_results);
-+
-+static inline int dpaa_eth_napi_schedule(struct dpa_percpu_priv_s *percpu_priv,
-+			struct qman_portal *portal)
-+{
-+	/* In case of threaded ISR for RT enable kernel,
-+	 * in_irq() does not return appropriate value, so use
-+	 * in_serving_softirq to distinguish softirq or irq context.
-+	 */
-+	if (unlikely(in_irq() || !in_serving_softirq())) {
-+		/* Disable QMan IRQ and invoke NAPI */
-+		int ret = qman_p_irqsource_remove(portal, QM_PIRQ_DQRI);
-+		if (likely(!ret)) {
-+			const struct qman_portal_config *pc =
-+					qman_p_get_portal_config(portal);
-+			struct dpa_napi_portal *np =
-+					&percpu_priv->np[pc->index];
-+
-+			np->p = portal;
-+			napi_schedule(&np->napi);
-+			percpu_priv->in_interrupt++;
-+			return 1;
-+		}
-+	}
-+	return 0;
-+}
-+
-+static inline ssize_t __const __must_check __attribute__((nonnull))
-+dpa_fd_length(const struct qm_fd *fd)
-+{
-+	return fd->length20;
-+}
-+
-+static inline ssize_t __const __must_check __attribute__((nonnull))
-+dpa_fd_offset(const struct qm_fd *fd)
-+{
-+	return fd->offset;
-+}
-+
-+/* Verifies if the skb length is below the interface MTU */
-+static inline int dpa_check_rx_mtu(struct sk_buff *skb, int mtu)
-+{
-+	if (unlikely(skb->len > mtu))
-+		if ((skb->protocol != htons(ETH_P_8021Q))
-+				|| (skb->len > mtu + 4))
-+			return -1;
-+
-+	return 0;
-+}
-+
-+static inline uint16_t dpa_get_headroom(struct dpa_buffer_layout_s *bl)
-+{
-+	uint16_t headroom;
-+	/* The frame headroom must accommodate:
-+	 * - the driver private data area
-+	 * - parse results, hash results, timestamp if selected
-+	 * - manip extra space
-+	 * If either hash results or time stamp are selected, both will
-+	 * be copied to/from the frame headroom, as TS is located between PR and
-+	 * HR in the IC and IC copy size has a granularity of 16bytes
-+	 * (see description of FMBM_RICP and FMBM_TICP registers in DPAARM)
-+	 *
-+	 * Also make sure the headroom is a multiple of data_align bytes
-+	 */
-+	headroom = (uint16_t)(bl->priv_data_size +
-+		   (bl->parse_results ? DPA_PARSE_RESULTS_SIZE : 0) +
-+		   (bl->hash_results || bl->time_stamp ?
-+		    DPA_TIME_STAMP_SIZE + DPA_HASH_RESULTS_SIZE : 0) +
-+		   bl->manip_extra_space);
-+
-+	return bl->data_align ? ALIGN(headroom, bl->data_align) : headroom;
-+}
-+
-+int fm_mac_dump_regs(struct mac_device *h_dev, char *buf, int n);
-+int fm_mac_dump_rx_stats(struct mac_device *h_dev, char *buf, int n);
-+int fm_mac_dump_tx_stats(struct mac_device *h_dev, char *buf, int n);
-+
-+void dpaa_eth_sysfs_remove(struct device *dev);
-+void dpaa_eth_sysfs_init(struct device *dev);
-+int dpaa_eth_poll(struct napi_struct *napi, int budget);
-+
-+void dpa_private_napi_del(struct net_device *net_dev);
-+
-+/* Equivalent to a memset(0), but works faster */
-+static inline void clear_fd(struct qm_fd *fd)
-+{
-+	fd->opaque_addr = 0;
-+	fd->opaque = 0;
-+	fd->cmd = 0;
-+}
-+
-+static inline int _dpa_tx_fq_to_id(const struct dpa_priv_s *priv,
-+		struct qman_fq *tx_fq)
-+{
-+	int i;
-+
-+	for (i = 0; i < DPAA_ETH_TX_QUEUES; i++)
-+		if (priv->egress_fqs[i] == tx_fq)
-+			return i;
-+
-+	return -EINVAL;
-+}
-+
-+static inline int __hot dpa_xmit(struct dpa_priv_s *priv,
-+			struct rtnl_link_stats64 *percpu_stats,
-+			struct qm_fd *fd, struct qman_fq *egress_fq,
-+			struct qman_fq *conf_fq)
-+{
-+	int err, i;
-+
-+	if (fd->bpid == 0xff)
-+		fd->cmd |= qman_fq_fqid(conf_fq);
-+
-+	/* Trace this Tx fd */
-+	trace_dpa_tx_fd(priv->net_dev, egress_fq, fd);
-+
-+	for (i = 0; i < 100000; i++) {
-+		err = qman_enqueue(egress_fq, fd, 0);
-+		if (err != -EBUSY)
-+			break;
-+	}
-+
-+	if (unlikely(err < 0)) {
-+		/* TODO differentiate b/w -EBUSY (EQCR full) and other codes? */
-+		percpu_stats->tx_errors++;
-+		percpu_stats->tx_fifo_errors++;
-+		return err;
-+	}
-+
-+	percpu_stats->tx_packets++;
-+	percpu_stats->tx_bytes += dpa_fd_length(fd);
-+
-+	return 0;
-+}
-+
-+/* Use multiple WQs for FQ assignment:
-+ *	- Tx Confirmation queues go to WQ1.
-+ *	- Rx Default, Tx and PCD queues go to WQ3 (no differentiation between
-+ *	  Rx and Tx traffic, or between Rx Default and Rx PCD frames).
-+ *	- Rx Error and Tx Error queues go to WQ2 (giving them a better chance
-+ *	  to be scheduled, in case there are many more FQs in WQ3).
-+ * This ensures that Tx-confirmed buffers are timely released. In particular,
-+ * it avoids congestion on the Tx Confirm FQs, which can pile up PFDRs if they
-+ * are greatly outnumbered by other FQs in the system (usually PCDs), while
-+ * dequeue scheduling is round-robin.
-+ */
-+static inline void _dpa_assign_wq(struct dpa_fq *fq)
-+{
-+	switch (fq->fq_type) {
-+	case FQ_TYPE_TX_CONFIRM:
-+	case FQ_TYPE_TX_CONF_MQ:
-+		fq->wq = 1;
-+		break;
-+	case FQ_TYPE_RX_DEFAULT:
-+	case FQ_TYPE_TX:
-+		fq->wq = 3;
-+		break;
-+	case FQ_TYPE_RX_ERROR:
-+	case FQ_TYPE_TX_ERROR:
-+	case FQ_TYPE_RX_PCD_HI_PRIO:
-+		fq->wq = 2;
-+		break;
-+	case FQ_TYPE_RX_PCD:
-+		fq->wq = 5;
-+		break;
-+	default:
-+		WARN(1, "Invalid FQ type %d for FQID %d!\n",
-+		       fq->fq_type, fq->fqid);
-+	}
-+}
-+
-+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
-+/* Use in lieu of skb_get_queue_mapping() */
-+#ifdef CONFIG_FMAN_PFC
-+#define dpa_get_queue_mapping(skb) \
-+	(((skb)->priority < CONFIG_FMAN_PFC_COS_COUNT) ? \
-+		((skb)->priority * dpa_num_cpus + smp_processor_id()) : \
-+		((CONFIG_FMAN_PFC_COS_COUNT - 1) * \
-+			dpa_num_cpus + smp_processor_id()));
-+
-+#else
-+#define dpa_get_queue_mapping(skb) \
-+	raw_smp_processor_id()
-+#endif
-+#else
-+/* Use the queue selected by XPS */
-+#define dpa_get_queue_mapping(skb) \
-+	skb_get_queue_mapping(skb)
-+#endif
-+
-+#ifdef CONFIG_PTP_1588_CLOCK_DPAA
-+struct ptp_priv_s {
-+	struct device_node *node;
-+	struct platform_device *of_dev;
-+	struct mac_device *mac_dev;
-+};
-+extern struct ptp_priv_s ptp_priv;
-+#endif
-+
-+static inline void _dpa_bp_free_pf(void *addr)
-+{
-+	put_page(virt_to_head_page(addr));
-+}
-+
-+/* TODO: LS1043A SoC has a HW issue regarding FMan DMA transactions; The issue
-+ * manifests itself at high traffic rates when frames exceed 4K memory
-+ * boundaries; For the moment, we use a SW workaround to avoid frames larger
-+ * than 4K or that exceed 4K alignments.
-+ */
-+
-+#ifndef CONFIG_PPC
-+extern bool dpaa_errata_a010022; /* SoC affected by A010022 errata */
-+
-+#define HAS_DMA_ISSUE(start, size) \
-+	(((u64)(start) + (size)) > (((u64)(start) + 0x1000) & ~0xFFF))
-+#define BOUNDARY_4K(start, size) (((u64)(start) + (u64)(size)) & ~0xFFF)
-+
-+#endif  /* !CONFIG_PPC */
-+
-+#endif	/* __DPA_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_base.c
-@@ -0,0 +1,263 @@
-+/* Copyright 2008-2013 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifdef CONFIG_FSL_DPAA_ETH_DEBUG
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": %s:%hu:%s() " fmt, \
-+	KBUILD_BASENAME".c", __LINE__, __func__
-+#else
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": " fmt
-+#endif
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/io.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_net.h>
-+#include <linux/etherdevice.h>
-+#include <linux/kthread.h>
-+#include <linux/percpu.h>
-+#include <linux/highmem.h>
-+#include <linux/sort.h>
-+#include <linux/fsl_qman.h>
-+#include "dpaa_eth.h"
-+#include "dpaa_eth_common.h"
-+#include "dpaa_eth_base.h"
-+
-+#define DPA_DESCRIPTION "FSL DPAA Advanced drivers:"
-+
-+MODULE_LICENSE("Dual BSD/GPL");
-+
-+uint8_t advanced_debug = -1;
-+module_param(advanced_debug, byte, S_IRUGO);
-+MODULE_PARM_DESC(advanced_debug, "Module/Driver verbosity level");
-+EXPORT_SYMBOL(advanced_debug);
-+
-+static int dpa_bp_cmp(const void *dpa_bp0, const void *dpa_bp1)
-+{
-+	return ((struct dpa_bp *)dpa_bp0)->size -
-+			((struct dpa_bp *)dpa_bp1)->size;
-+}
-+
-+struct dpa_bp * __cold __must_check /* __attribute__((nonnull)) */
-+dpa_bp_probe(struct platform_device *_of_dev, size_t *count)
-+{
-+	int			 i, lenp, na, ns, err;
-+	struct device		*dev;
-+	struct device_node	*dev_node;
-+	const __be32		*bpool_cfg;
-+	struct dpa_bp		*dpa_bp;
-+	u32			bpid;
-+
-+	dev = &_of_dev->dev;
-+
-+	*count = of_count_phandle_with_args(dev->of_node,
-+			"fsl,bman-buffer-pools", NULL);
-+	if (*count < 1) {
-+		dev_err(dev, "missing fsl,bman-buffer-pools device tree entry\n");
-+		return ERR_PTR(-EINVAL);
-+	}
-+
-+	dpa_bp = devm_kzalloc(dev, *count * sizeof(*dpa_bp), GFP_KERNEL);
-+	if (dpa_bp == NULL) {
-+		dev_err(dev, "devm_kzalloc() failed\n");
-+		return ERR_PTR(-ENOMEM);
-+	}
-+
-+	dev_node = of_find_node_by_path("/");
-+	if (unlikely(dev_node == NULL)) {
-+		dev_err(dev, "of_find_node_by_path(/) failed\n");
-+		return ERR_PTR(-EINVAL);
-+	}
-+
-+	na = of_n_addr_cells(dev_node);
-+	ns = of_n_size_cells(dev_node);
-+
-+	for (i = 0; i < *count; i++) {
-+		of_node_put(dev_node);
-+
-+		dev_node = of_parse_phandle(dev->of_node,
-+				"fsl,bman-buffer-pools", i);
-+		if (dev_node == NULL) {
-+			dev_err(dev, "of_find_node_by_phandle() failed\n");
-+			return ERR_PTR(-EFAULT);
-+		}
-+
-+		if (unlikely(!of_device_is_compatible(dev_node, "fsl,bpool"))) {
-+			dev_err(dev,
-+				"!of_device_is_compatible(%s, fsl,bpool)\n",
-+				dev_node->full_name);
-+			dpa_bp = ERR_PTR(-EINVAL);
-+			goto _return_of_node_put;
-+		}
-+
-+		err = of_property_read_u32(dev_node, "fsl,bpid", &bpid);
-+		if (err) {
-+			dev_err(dev, "Cannot find buffer pool ID in the device tree\n");
-+			dpa_bp = ERR_PTR(-EINVAL);
-+			goto _return_of_node_put;
-+		}
-+		dpa_bp[i].bpid = (uint8_t)bpid;
-+
-+		bpool_cfg = of_get_property(dev_node, "fsl,bpool-ethernet-cfg",
-+					&lenp);
-+		if (bpool_cfg && (lenp == (2 * ns + na) * sizeof(*bpool_cfg))) {
-+			const uint32_t *seed_pool;
-+
-+			dpa_bp[i].config_count =
-+				(int)of_read_number(bpool_cfg, ns);
-+			dpa_bp[i].size	=
-+				(size_t)of_read_number(bpool_cfg + ns, ns);
-+			dpa_bp[i].paddr	=
-+				of_read_number(bpool_cfg + 2 * ns, na);
-+
-+			seed_pool = of_get_property(dev_node,
-+					"fsl,bpool-ethernet-seeds", &lenp);
-+			dpa_bp[i].seed_pool = !!seed_pool;
-+
-+		} else {
-+			dev_err(dev,
-+				"Missing/invalid fsl,bpool-ethernet-cfg device tree entry for node %s\n",
-+				dev_node->full_name);
-+			dpa_bp = ERR_PTR(-EINVAL);
-+			goto _return_of_node_put;
-+		}
-+	}
-+
-+	sort(dpa_bp, *count, sizeof(*dpa_bp), dpa_bp_cmp, NULL);
-+
-+	return dpa_bp;
-+
-+_return_of_node_put:
-+	if (dev_node)
-+		of_node_put(dev_node);
-+
-+	return dpa_bp;
-+}
-+EXPORT_SYMBOL(dpa_bp_probe);
-+
-+int dpa_bp_shared_port_seed(struct dpa_bp *bp)
-+{
-+	void __iomem **ptr;
-+
-+	/* In MAC-less and Shared-MAC scenarios the physical
-+	 * address of the buffer pool in device tree is set
-+	 * to 0 to specify that another entity (USDPAA) will
-+	 * allocate and seed the buffers
-+	 */
-+	if (!bp->paddr)
-+		return 0;
-+
-+	/* allocate memory region for buffers */
-+	devm_request_mem_region(bp->dev, bp->paddr,
-+			bp->size * bp->config_count, KBUILD_MODNAME);
-+	/* managed ioremap unmapping */
-+	ptr = devres_alloc(devm_ioremap_release, sizeof(*ptr), GFP_KERNEL);
-+	if (!ptr)
-+		return -EIO;
-+#ifndef CONFIG_PPC
-+	bp->vaddr = ioremap_cache_ns(bp->paddr, bp->size * bp->config_count);
-+#else
-+	bp->vaddr = ioremap_prot(bp->paddr, bp->size * bp->config_count, 0);
-+#endif
-+	if (bp->vaddr == NULL) {
-+		pr_err("Could not map memory for pool %d\n", bp->bpid);
-+		devres_free(ptr);
-+		return -EIO;
-+	}
-+	*ptr = bp->vaddr;
-+	devres_add(bp->dev, ptr);
-+
-+	/* seed pool with buffers from that memory region */
-+	if (bp->seed_pool) {
-+		int count = bp->target_count;
-+		dma_addr_t addr = bp->paddr;
-+
-+		while (count) {
-+			struct bm_buffer bufs[8];
-+			uint8_t num_bufs = 0;
-+
-+			do {
-+				BUG_ON(addr > 0xffffffffffffull);
-+				bufs[num_bufs].bpid = bp->bpid;
-+				bm_buffer_set64(&bufs[num_bufs++], addr);
-+				addr += bp->size;
-+
-+			} while (--count && (num_bufs < 8));
-+
-+			while (bman_release(bp->pool, bufs, num_bufs, 0))
-+				cpu_relax();
-+		}
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(dpa_bp_shared_port_seed);
-+
-+int dpa_bp_create(struct net_device *net_dev, struct dpa_bp *dpa_bp,
-+		size_t count)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(net_dev);
-+	int i;
-+
-+	priv->dpa_bp = dpa_bp;
-+	priv->bp_count = count;
-+
-+	for (i = 0; i < count; i++) {
-+		int err;
-+		err = dpa_bp_alloc(&dpa_bp[i]);
-+		if (err < 0) {
-+			dpa_bp_free(priv);
-+			priv->dpa_bp = NULL;
-+			return err;
-+		}
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(dpa_bp_create);
-+
-+static int __init __cold dpa_advanced_load(void)
-+{
-+	pr_info(DPA_DESCRIPTION "\n");
-+
-+	return 0;
-+}
-+module_init(dpa_advanced_load);
-+
-+static void __exit __cold dpa_advanced_unload(void)
-+{
-+	pr_debug(KBUILD_MODNAME ": -> %s:%s()\n",
-+		 KBUILD_BASENAME".c", __func__);
-+
-+}
-+module_exit(dpa_advanced_unload);
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_base.h
-@@ -0,0 +1,50 @@
-+/* Copyright 2008-2013 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __DPAA_ETH_BASE_H
-+#define __DPAA_ETH_BASE_H
-+
-+#include <linux/etherdevice.h> /* struct net_device */
-+#include <linux/fsl_bman.h> /* struct bm_buffer */
-+#include <linux/of_platform.h> /* struct platform_device */
-+#include <linux/net_tstamp.h>	/* struct hwtstamp_config */
-+
-+extern uint8_t advanced_debug;
-+extern const struct dpa_fq_cbs_t shared_fq_cbs;
-+extern int __hot dpa_shared_tx(struct sk_buff *skb, struct net_device *net_dev);
-+
-+struct dpa_bp * __cold __must_check /* __attribute__((nonnull)) */
-+dpa_bp_probe(struct platform_device *_of_dev, size_t *count);
-+int dpa_bp_create(struct net_device *net_dev, struct dpa_bp *dpa_bp,
-+		size_t count);
-+int dpa_bp_shared_port_seed(struct dpa_bp *bp);
-+
-+#endif /* __DPAA_ETH_BASE_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -0,0 +1,1991 @@
-+/* Copyright 2008-2016 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/init.h>
-+#include "dpaa_eth_ceetm.h"
-+
-+#define DPA_CEETM_DESCRIPTION "FSL DPAA CEETM qdisc"
-+
-+const struct nla_policy ceetm_policy[TCA_CEETM_MAX + 1] = {
-+	[TCA_CEETM_COPT] = { .len = sizeof(struct tc_ceetm_copt) },
-+	[TCA_CEETM_QOPS] = { .len = sizeof(struct tc_ceetm_qopt) },
-+};
-+
-+struct Qdisc_ops ceetm_qdisc_ops;
-+
-+/* Obtain the DCP and the SP ids from the FMan port */
-+static void get_dcp_and_sp(struct net_device *dev, enum qm_dc_portal *dcp_id,
-+			   unsigned int *sp_id)
-+{
-+	uint32_t channel;
-+	t_LnxWrpFmPortDev *port_dev;
-+	struct dpa_priv_s *dpa_priv = netdev_priv(dev);
-+	struct mac_device *mac_dev = dpa_priv->mac_dev;
-+
-+	port_dev = (t_LnxWrpFmPortDev *)mac_dev->port_dev[TX];
-+	channel = port_dev->txCh;
-+
-+	*sp_id = channel & CHANNEL_SP_MASK;
-+	pr_debug(KBUILD_BASENAME " : FM sub-portal ID %d\n", *sp_id);
-+
-+	if (channel < DCP0_MAX_CHANNEL) {
-+		*dcp_id = qm_dc_portal_fman0;
-+		pr_debug(KBUILD_BASENAME " : DCP ID 0\n");
-+	} else {
-+		*dcp_id = qm_dc_portal_fman1;
-+		pr_debug(KBUILD_BASENAME " : DCP ID 1\n");
-+	}
-+}
-+
-+/* Enqueue Rejection Notification callback */
-+static void ceetm_ern(struct qman_portal *portal, struct qman_fq *fq,
-+		      const struct qm_mr_entry *msg)
-+{
-+	struct net_device *net_dev;
-+	struct ceetm_class *cls;
-+	struct ceetm_class_stats *cstats = NULL;
-+	const struct dpa_priv_s *dpa_priv;
-+	struct dpa_percpu_priv_s *dpa_percpu_priv;
-+	struct sk_buff *skb;
-+	struct qm_fd fd = msg->ern.fd;
-+
-+	net_dev = ((struct ceetm_fq *)fq)->net_dev;
-+	dpa_priv = netdev_priv(net_dev);
-+	dpa_percpu_priv = raw_cpu_ptr(dpa_priv->percpu_priv);
-+
-+	/* Increment DPA counters */
-+	dpa_percpu_priv->stats.tx_dropped++;
-+	dpa_percpu_priv->stats.tx_fifo_errors++;
-+
-+	/* Increment CEETM counters */
-+	cls = ((struct ceetm_fq *)fq)->ceetm_cls;
-+	switch (cls->type) {
-+	case CEETM_PRIO:
-+		cstats = this_cpu_ptr(cls->prio.cstats);
-+		break;
-+	case CEETM_WBFS:
-+		cstats = this_cpu_ptr(cls->wbfs.cstats);
-+		break;
-+	}
-+
-+	if (cstats)
-+		cstats->ern_drop_count++;
-+
-+	if (fd.bpid != 0xff) {
-+		dpa_fd_release(net_dev, &fd);
-+		return;
-+	}
-+
-+	skb = _dpa_cleanup_tx_fd(dpa_priv, &fd);
-+	dev_kfree_skb_any(skb);
-+}
-+
-+/* Congestion State Change Notification callback */
-+static void ceetm_cscn(struct qm_ceetm_ccg *ccg, void *cb_ctx, int congested)
-+{
-+	struct ceetm_fq *ceetm_fq = (struct ceetm_fq *)cb_ctx;
-+	struct dpa_priv_s *dpa_priv = netdev_priv(ceetm_fq->net_dev);
-+	struct ceetm_class *cls = ceetm_fq->ceetm_cls;
-+	struct ceetm_class_stats *cstats = NULL;
-+
-+	switch (cls->type) {
-+	case CEETM_PRIO:
-+		cstats = this_cpu_ptr(cls->prio.cstats);
-+		break;
-+	case CEETM_WBFS:
-+		cstats = this_cpu_ptr(cls->wbfs.cstats);
-+		break;
-+	}
-+
-+	if (congested) {
-+		dpa_priv->cgr_data.congestion_start_jiffies = jiffies;
-+		netif_tx_stop_all_queues(dpa_priv->net_dev);
-+		dpa_priv->cgr_data.cgr_congested_count++;
-+		if (cstats)
-+			cstats->congested_count++;
-+	} else {
-+		dpa_priv->cgr_data.congested_jiffies +=
-+			(jiffies - dpa_priv->cgr_data.congestion_start_jiffies);
-+		netif_tx_wake_all_queues(dpa_priv->net_dev);
-+	}
-+}
-+
-+/* Allocate a ceetm fq */
-+static int ceetm_alloc_fq(struct ceetm_fq **fq, struct net_device *dev,
-+			  struct ceetm_class *cls)
-+{
-+	*fq = kzalloc(sizeof(**fq), GFP_KERNEL);
-+	if (!*fq)
-+		return -ENOMEM;
-+
-+	(*fq)->net_dev = dev;
-+	(*fq)->ceetm_cls = cls;
-+	return 0;
-+}
-+
-+/* Configure a ceetm Class Congestion Group */
-+static int ceetm_config_ccg(struct qm_ceetm_ccg **ccg,
-+			    struct qm_ceetm_channel *channel, unsigned int id,
-+			    struct ceetm_fq *fq, struct dpa_priv_s *dpa_priv)
-+{
-+	int err;
-+	u32 cs_th;
-+	u16 ccg_mask;
-+	struct qm_ceetm_ccg_params ccg_params;
-+
-+	err = qman_ceetm_ccg_claim(ccg, channel, id, ceetm_cscn, fq);
-+	if (err)
-+		return err;
-+
-+	/* Configure the count mode (frames/bytes), enable congestion state
-+	 * notifications, configure the congestion entry and exit thresholds,
-+	 * enable tail-drop, configure the tail-drop mode, and set the
-+	 * overhead accounting limit
-+	 */
-+	ccg_mask = QM_CCGR_WE_MODE |
-+		   QM_CCGR_WE_CSCN_EN |
-+		   QM_CCGR_WE_CS_THRES_IN | QM_CCGR_WE_CS_THRES_OUT |
-+		   QM_CCGR_WE_TD_EN | QM_CCGR_WE_TD_MODE |
-+		   QM_CCGR_WE_OAL;
-+
-+	ccg_params.mode = 0; /* count bytes */
-+	ccg_params.cscn_en = 1; /* generate notifications */
-+	ccg_params.td_en = 1; /* enable tail-drop */
-+	ccg_params.td_mode = 0; /* tail-drop on congestion state */
-+	ccg_params.oal = (signed char)(min(sizeof(struct sk_buff) +
-+			  dpa_priv->tx_headroom, (size_t)FSL_QMAN_MAX_OAL));
-+
-+	/* Set the congestion state thresholds according to the link speed */
-+	if (dpa_priv->mac_dev->if_support & SUPPORTED_10000baseT_Full)
-+		cs_th = CONFIG_FSL_DPAA_CS_THRESHOLD_10G;
-+	else
-+		cs_th = CONFIG_FSL_DPAA_CS_THRESHOLD_1G;
-+
-+	qm_cgr_cs_thres_set64(&ccg_params.cs_thres_in, cs_th, 1);
-+	qm_cgr_cs_thres_set64(&ccg_params.cs_thres_out,
-+			      cs_th * CEETM_CCGR_RATIO, 1);
-+
-+	err = qman_ceetm_ccg_set(*ccg, ccg_mask, &ccg_params);
-+	if (err)
-+		return err;
-+
-+	return 0;
-+}
-+
-+/* Configure a ceetm Logical Frame Queue */
-+static int ceetm_config_lfq(struct qm_ceetm_cq *cq, struct ceetm_fq *fq,
-+			    struct qm_ceetm_lfq **lfq)
-+{
-+	int err;
-+	u64 context_a;
-+	u32 context_b;
-+
-+	err = qman_ceetm_lfq_claim(lfq, cq);
-+	if (err)
-+		return err;
-+
-+	/* Get the former contexts in order to preserve context B */
-+	err = qman_ceetm_lfq_get_context(*lfq, &context_a, &context_b);
-+	if (err)
-+		return err;
-+
-+	context_a = CEETM_CONTEXT_A;
-+	err = qman_ceetm_lfq_set_context(*lfq, context_a, context_b);
-+	if (err)
-+		return err;
-+
-+	(*lfq)->ern = ceetm_ern;
-+
-+	err = qman_ceetm_create_fq(*lfq, &fq->fq);
-+	if (err)
-+		return err;
-+
-+	return 0;
-+}
-+
-+/* Configure a prio ceetm class */
-+static int ceetm_config_prio_cls(struct ceetm_class *cls,
-+				 struct net_device *dev,
-+				 struct qm_ceetm_channel *channel,
-+				 unsigned int id)
-+{
-+	int err;
-+	struct dpa_priv_s *dpa_priv = netdev_priv(dev);
-+
-+	err = ceetm_alloc_fq(&cls->prio.fq, dev, cls);
-+	if (err)
-+		return err;
-+
-+	/* Claim and configure the CCG */
-+	err = ceetm_config_ccg(&cls->prio.ccg, channel, id, cls->prio.fq,
-+			       dpa_priv);
-+	if (err)
-+		return err;
-+
-+	/* Claim and configure the CQ */
-+	err = qman_ceetm_cq_claim(&cls->prio.cq, channel, id, cls->prio.ccg);
-+	if (err)
-+		return err;
-+
-+	if (cls->shaped) {
-+		err = qman_ceetm_channel_set_cq_cr_eligibility(channel, id, 1);
-+		if (err)
-+			return err;
-+
-+		err = qman_ceetm_channel_set_cq_er_eligibility(channel, id, 1);
-+		if (err)
-+			return err;
-+	}
-+
-+	/* Claim and configure a LFQ */
-+	err = ceetm_config_lfq(cls->prio.cq, cls->prio.fq, &cls->prio.lfq);
-+	if (err)
-+		return err;
-+
-+	return 0;
-+}
-+
-+/* Configure a wbfs ceetm class */
-+static int ceetm_config_wbfs_cls(struct ceetm_class *cls,
-+				 struct net_device *dev,
-+				 struct qm_ceetm_channel *channel,
-+				 unsigned int id, int type)
-+{
-+	int err;
-+	struct dpa_priv_s *dpa_priv = netdev_priv(dev);
-+
-+	err = ceetm_alloc_fq(&cls->wbfs.fq, dev, cls);
-+	if (err)
-+		return err;
-+
-+	/* Claim and configure the CCG */
-+	err = ceetm_config_ccg(&cls->wbfs.ccg, channel, id, cls->wbfs.fq,
-+			       dpa_priv);
-+	if (err)
-+		return err;
-+
-+	/* Claim and configure the CQ */
-+	if (type == WBFS_GRP_B)
-+		err = qman_ceetm_cq_claim_B(&cls->wbfs.cq, channel, id,
-+					    cls->wbfs.ccg);
-+	else
-+		err = qman_ceetm_cq_claim_A(&cls->wbfs.cq, channel, id,
-+					    cls->wbfs.ccg);
-+	if (err)
-+		return err;
-+
-+	/* Configure the CQ weight: real number multiplied by 100 to get rid
-+	 * of the fraction
-+	 */
-+	err = qman_ceetm_set_queue_weight_in_ratio(cls->wbfs.cq,
-+						   cls->wbfs.weight * 100);
-+	if (err)
-+		return err;
-+
-+	/* Claim and configure a LFQ */
-+	err = ceetm_config_lfq(cls->wbfs.cq, cls->wbfs.fq, &cls->wbfs.lfq);
-+	if (err)
-+		return err;
-+
-+	return 0;
-+}
-+
-+/* Find class in qdisc hash table using given handle */
-+static inline struct ceetm_class *ceetm_find(u32 handle, struct Qdisc *sch)
-+{
-+	struct ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct Qdisc_class_common *clc;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : find class %X in qdisc %X\n",
-+		 __func__, handle, sch->handle);
-+
-+	clc = qdisc_class_find(&priv->clhash, handle);
-+	return clc ? container_of(clc, struct ceetm_class, common) : NULL;
-+}
-+
-+/* Insert a class in the qdisc's class hash */
-+static void ceetm_link_class(struct Qdisc *sch,
-+			     struct Qdisc_class_hash *clhash,
-+			     struct Qdisc_class_common *common)
-+{
-+	sch_tree_lock(sch);
-+	qdisc_class_hash_insert(clhash, common);
-+	sch_tree_unlock(sch);
-+	qdisc_class_hash_grow(sch, clhash);
-+}
-+
-+/* Destroy a ceetm class */
-+static void ceetm_cls_destroy(struct Qdisc *sch, struct ceetm_class *cl)
-+{
-+	if (!cl)
-+		return;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : destroy class %X from under %X\n",
-+		 __func__, cl->common.classid, sch->handle);
-+
-+	switch (cl->type) {
-+	case CEETM_ROOT:
-+		if (cl->root.child) {
-+			qdisc_destroy(cl->root.child);
-+			cl->root.child = NULL;
-+		}
-+
-+		if (cl->root.ch && qman_ceetm_channel_release(cl->root.ch))
-+			pr_err(KBUILD_BASENAME
-+			       " : %s : error releasing the channel %d\n",
-+			       __func__, cl->root.ch->idx);
-+
-+		break;
-+
-+	case CEETM_PRIO:
-+		if (cl->prio.child) {
-+			qdisc_destroy(cl->prio.child);
-+			cl->prio.child = NULL;
-+		}
-+
-+		if (cl->prio.lfq && qman_ceetm_lfq_release(cl->prio.lfq))
-+			pr_err(KBUILD_BASENAME
-+			       " : %s : error releasing the LFQ %d\n",
-+			       __func__, cl->prio.lfq->idx);
-+
-+		if (cl->prio.cq && qman_ceetm_cq_release(cl->prio.cq))
-+			pr_err(KBUILD_BASENAME
-+			       " : %s : error releasing the CQ %d\n",
-+			       __func__, cl->prio.cq->idx);
-+
-+		if (cl->prio.ccg && qman_ceetm_ccg_release(cl->prio.ccg))
-+			pr_err(KBUILD_BASENAME
-+			       " : %s : error releasing the CCG %d\n",
-+			       __func__, cl->prio.ccg->idx);
-+
-+		kfree(cl->prio.fq);
-+
-+		if (cl->prio.cstats)
-+			free_percpu(cl->prio.cstats);
-+
-+		break;
-+
-+	case CEETM_WBFS:
-+		if (cl->wbfs.lfq && qman_ceetm_lfq_release(cl->wbfs.lfq))
-+			pr_err(KBUILD_BASENAME
-+			       " : %s : error releasing the LFQ %d\n",
-+			       __func__, cl->wbfs.lfq->idx);
-+
-+		if (cl->wbfs.cq && qman_ceetm_cq_release(cl->wbfs.cq))
-+			pr_err(KBUILD_BASENAME
-+			       " : %s : error releasing the CQ %d\n",
-+			       __func__, cl->wbfs.cq->idx);
-+
-+		if (cl->wbfs.ccg && qman_ceetm_ccg_release(cl->wbfs.ccg))
-+			pr_err(KBUILD_BASENAME
-+			       " : %s : error releasing the CCG %d\n",
-+			       __func__, cl->wbfs.ccg->idx);
-+
-+		kfree(cl->wbfs.fq);
-+
-+		if (cl->wbfs.cstats)
-+			free_percpu(cl->wbfs.cstats);
-+	}
-+
-+	tcf_destroy_chain(&cl->filter_list);
-+	kfree(cl);
-+}
-+
-+/* Destroy a ceetm qdisc */
-+static void ceetm_destroy(struct Qdisc *sch)
-+{
-+	unsigned int ntx, i;
-+	struct hlist_node *next;
-+	struct ceetm_class *cl;
-+	struct ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct net_device *dev = qdisc_dev(sch);
-+
-+	pr_debug(KBUILD_BASENAME " : %s : destroy qdisc %X\n",
-+		 __func__, sch->handle);
-+
-+	/* All filters need to be removed before destroying the classes */
-+	tcf_destroy_chain(&priv->filter_list);
-+
-+	for (i = 0; i < priv->clhash.hashsize; i++) {
-+		hlist_for_each_entry(cl, &priv->clhash.hash[i], common.hnode)
-+			tcf_destroy_chain(&cl->filter_list);
-+	}
-+
-+	for (i = 0; i < priv->clhash.hashsize; i++) {
-+		hlist_for_each_entry_safe(cl, next, &priv->clhash.hash[i],
-+					  common.hnode)
-+			ceetm_cls_destroy(sch, cl);
-+	}
-+
-+	qdisc_class_hash_destroy(&priv->clhash);
-+
-+	switch (priv->type) {
-+	case CEETM_ROOT:
-+		dpa_disable_ceetm(dev);
-+
-+		if (priv->root.lni && qman_ceetm_lni_release(priv->root.lni))
-+			pr_err(KBUILD_BASENAME
-+			       " : %s : error releasing the LNI %d\n",
-+			       __func__, priv->root.lni->idx);
-+
-+		if (priv->root.sp && qman_ceetm_sp_release(priv->root.sp))
-+			pr_err(KBUILD_BASENAME
-+			       " : %s : error releasing the SP %d\n",
-+			       __func__, priv->root.sp->idx);
-+
-+		if (priv->root.qstats)
-+			free_percpu(priv->root.qstats);
-+
-+		if (!priv->root.qdiscs)
-+			break;
-+
-+		/* Remove the pfifo qdiscs */
-+		for (ntx = 0; ntx < dev->num_tx_queues; ntx++)
-+			if (priv->root.qdiscs[ntx])
-+				qdisc_destroy(priv->root.qdiscs[ntx]);
-+
-+		kfree(priv->root.qdiscs);
-+		break;
-+
-+	case CEETM_PRIO:
-+		if (priv->prio.parent)
-+			priv->prio.parent->root.child = NULL;
-+		break;
-+
-+	case CEETM_WBFS:
-+		if (priv->wbfs.parent)
-+			priv->wbfs.parent->prio.child = NULL;
-+		break;
-+	}
-+}
-+
-+static int ceetm_dump(struct Qdisc *sch, struct sk_buff *skb)
-+{
-+	struct Qdisc *qdisc;
-+	unsigned int ntx, i;
-+	struct nlattr *nest;
-+	struct tc_ceetm_qopt qopt;
-+	struct ceetm_qdisc_stats *qstats;
-+	struct net_device *dev = qdisc_dev(sch);
-+	struct ceetm_qdisc *priv = qdisc_priv(sch);
-+
-+	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-+
-+	sch_tree_lock(sch);
-+	memset(&qopt, 0, sizeof(qopt));
-+	qopt.type = priv->type;
-+	qopt.shaped = priv->shaped;
-+
-+	switch (priv->type) {
-+	case CEETM_ROOT:
-+		/* Gather statistics from the underlying pfifo qdiscs */
-+		sch->q.qlen = 0;
-+		memset(&sch->bstats, 0, sizeof(sch->bstats));
-+		memset(&sch->qstats, 0, sizeof(sch->qstats));
-+
-+		for (ntx = 0; ntx < dev->num_tx_queues; ntx++) {
-+			qdisc = netdev_get_tx_queue(dev, ntx)->qdisc_sleeping;
-+			sch->q.qlen		+= qdisc->q.qlen;
-+			sch->bstats.bytes	+= qdisc->bstats.bytes;
-+			sch->bstats.packets	+= qdisc->bstats.packets;
-+			sch->qstats.qlen	+= qdisc->qstats.qlen;
-+			sch->qstats.backlog	+= qdisc->qstats.backlog;
-+			sch->qstats.drops	+= qdisc->qstats.drops;
-+			sch->qstats.requeues	+= qdisc->qstats.requeues;
-+			sch->qstats.overlimits	+= qdisc->qstats.overlimits;
-+		}
-+
-+		for_each_online_cpu(i) {
-+			qstats = per_cpu_ptr(priv->root.qstats, i);
-+			sch->qstats.drops += qstats->drops;
-+		}
-+
-+		qopt.rate = priv->root.rate;
-+		qopt.ceil = priv->root.ceil;
-+		qopt.overhead = priv->root.overhead;
-+		break;
-+
-+	case CEETM_PRIO:
-+		qopt.qcount = priv->prio.qcount;
-+		break;
-+
-+	case CEETM_WBFS:
-+		qopt.qcount = priv->wbfs.qcount;
-+		qopt.cr = priv->wbfs.cr;
-+		qopt.er = priv->wbfs.er;
-+		break;
-+
-+	default:
-+		pr_err(KBUILD_BASENAME " : %s : invalid qdisc\n", __func__);
-+		sch_tree_unlock(sch);
-+		return -EINVAL;
-+	}
-+
-+	nest = nla_nest_start(skb, TCA_OPTIONS);
-+	if (!nest)
-+		goto nla_put_failure;
-+	if (nla_put(skb, TCA_CEETM_QOPS, sizeof(qopt), &qopt))
-+		goto nla_put_failure;
-+	nla_nest_end(skb, nest);
-+
-+	sch_tree_unlock(sch);
-+	return skb->len;
-+
-+nla_put_failure:
-+	sch_tree_unlock(sch);
-+	nla_nest_cancel(skb, nest);
-+	return -EMSGSIZE;
-+}
-+
-+/* Configure a root ceetm qdisc */
-+static int ceetm_init_root(struct Qdisc *sch, struct ceetm_qdisc *priv,
-+			   struct tc_ceetm_qopt *qopt)
-+{
-+	struct netdev_queue *dev_queue;
-+	struct Qdisc *qdisc;
-+	enum qm_dc_portal dcp_id;
-+	unsigned int i, sp_id, parent_id;
-+	int err;
-+	u64 bps;
-+	struct qm_ceetm_sp *sp;
-+	struct qm_ceetm_lni *lni;
-+	struct net_device *dev = qdisc_dev(sch);
-+	struct dpa_priv_s *dpa_priv = netdev_priv(dev);
-+	struct mac_device *mac_dev = dpa_priv->mac_dev;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-+
-+	/* Validate inputs */
-+	if (sch->parent != TC_H_ROOT) {
-+		pr_err("CEETM: a root ceetm qdisc can not be attached to a class\n");
-+		tcf_destroy_chain(&priv->filter_list);
-+		qdisc_class_hash_destroy(&priv->clhash);
-+		return -EINVAL;
-+	}
-+
-+	if (!mac_dev) {
-+		pr_err("CEETM: the interface is lacking a mac\n");
-+		err = -EINVAL;
-+		goto err_init_root;
-+	}
-+
-+	/* pre-allocate underlying pfifo qdiscs */
-+	priv->root.qdiscs = kcalloc(dev->num_tx_queues,
-+				    sizeof(priv->root.qdiscs[0]),
-+				    GFP_KERNEL);
-+	if (!priv->root.qdiscs) {
-+		err = -ENOMEM;
-+		goto err_init_root;
-+	}
-+
-+	for (i = 0; i < dev->num_tx_queues; i++) {
-+		dev_queue = netdev_get_tx_queue(dev, i);
-+		parent_id = TC_H_MAKE(TC_H_MAJ(sch->handle),
-+				      TC_H_MIN(i + PFIFO_MIN_OFFSET));
-+
-+		qdisc = qdisc_create_dflt(dev_queue, &pfifo_qdisc_ops,
-+					  parent_id);
-+		if (!qdisc) {
-+			err = -ENOMEM;
-+			goto err_init_root;
-+		}
-+
-+		priv->root.qdiscs[i] = qdisc;
-+		qdisc->flags |= TCQ_F_ONETXQUEUE;
-+	}
-+
-+	sch->flags |= TCQ_F_MQROOT;
-+
-+	priv->root.qstats = alloc_percpu(struct ceetm_qdisc_stats);
-+	if (!priv->root.qstats) {
-+		pr_err(KBUILD_BASENAME " : %s : alloc_percpu() failed\n",
-+		       __func__);
-+		err = -ENOMEM;
-+		goto err_init_root;
-+	}
-+
-+	priv->shaped = qopt->shaped;
-+	priv->root.rate = qopt->rate;
-+	priv->root.ceil = qopt->ceil;
-+	priv->root.overhead = qopt->overhead;
-+
-+	/* Claim the SP */
-+	get_dcp_and_sp(dev, &dcp_id, &sp_id);
-+	err = qman_ceetm_sp_claim(&sp, dcp_id, sp_id);
-+	if (err) {
-+		pr_err(KBUILD_BASENAME " : %s : failed to claim the SP\n",
-+		       __func__);
-+		goto err_init_root;
-+	}
-+
-+	priv->root.sp = sp;
-+
-+	/* Claim the LNI - will use the same id as the SP id since SPs 0-7
-+	 * are connected to the TX FMan ports
-+	 */
-+	err = qman_ceetm_lni_claim(&lni, dcp_id, sp_id);
-+	if (err) {
-+		pr_err(KBUILD_BASENAME " : %s : failed to claim the LNI\n",
-+		       __func__);
-+		goto err_init_root;
-+	}
-+
-+	priv->root.lni = lni;
-+
-+	err = qman_ceetm_sp_set_lni(sp, lni);
-+	if (err) {
-+		pr_err(KBUILD_BASENAME " : %s : failed to link the SP and LNI\n",
-+		       __func__);
-+		goto err_init_root;
-+	}
-+
-+	lni->sp = sp;
-+
-+	/* Configure the LNI shaper */
-+	if (priv->shaped) {
-+		err = qman_ceetm_lni_enable_shaper(lni, 1, priv->root.overhead);
-+		if (err) {
-+			pr_err(KBUILD_BASENAME " : %s : failed to configure the LNI shaper\n",
-+			       __func__);
-+			goto err_init_root;
-+		}
-+
-+		bps = priv->root.rate << 3; /* Bps -> bps */
-+		err = qman_ceetm_lni_set_commit_rate_bps(lni, bps, dev->mtu);
-+		if (err) {
-+			pr_err(KBUILD_BASENAME " : %s : failed to configure the LNI shaper\n",
-+			       __func__);
-+			goto err_init_root;
-+		}
-+
-+		bps = priv->root.ceil << 3; /* Bps -> bps */
-+		err = qman_ceetm_lni_set_excess_rate_bps(lni, bps, dev->mtu);
-+		if (err) {
-+			pr_err(KBUILD_BASENAME " : %s : failed to configure the LNI shaper\n",
-+			       __func__);
-+			goto err_init_root;
-+		}
-+	}
-+
-+	/* TODO default configuration */
-+
-+	dpa_enable_ceetm(dev);
-+	return 0;
-+
-+err_init_root:
-+	ceetm_destroy(sch);
-+	return err;
-+}
-+
-+/* Configure a prio ceetm qdisc */
-+static int ceetm_init_prio(struct Qdisc *sch, struct ceetm_qdisc *priv,
-+			   struct tc_ceetm_qopt *qopt)
-+{
-+	int err;
-+	unsigned int i;
-+	struct ceetm_class *parent_cl, *child_cl;
-+	struct Qdisc *parent_qdisc;
-+	struct net_device *dev = qdisc_dev(sch);
-+
-+	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-+
-+	if (sch->parent == TC_H_ROOT) {
-+		pr_err("CEETM: a prio ceetm qdisc can not be root\n");
-+		err = -EINVAL;
-+		goto err_init_prio;
-+	}
-+
-+	parent_qdisc = qdisc_lookup(dev, TC_H_MAJ(sch->parent));
-+	if (strcmp(parent_qdisc->ops->id, ceetm_qdisc_ops.id)) {
-+		pr_err("CEETM: a ceetm qdisc can not be attached to other qdisc/class types\n");
-+		err = -EINVAL;
-+		goto err_init_prio;
-+	}
-+
-+	/* Obtain the parent root ceetm_class */
-+	parent_cl = ceetm_find(sch->parent, parent_qdisc);
-+
-+	if (!parent_cl || parent_cl->type != CEETM_ROOT) {
-+		pr_err("CEETM: a prio ceetm qdiscs can be added only under a root ceetm class\n");
-+		err = -EINVAL;
-+		goto err_init_prio;
-+	}
-+
-+	priv->prio.parent = parent_cl;
-+	parent_cl->root.child = sch;
-+
-+	priv->shaped = parent_cl->shaped;
-+	priv->prio.qcount = qopt->qcount;
-+
-+	/* Create and configure qcount child classes */
-+	for (i = 0; i < priv->prio.qcount; i++) {
-+		child_cl = kzalloc(sizeof(*child_cl), GFP_KERNEL);
-+		if (!child_cl) {
-+			pr_err(KBUILD_BASENAME " : %s : kzalloc() failed\n",
-+			       __func__);
-+			err = -ENOMEM;
-+			goto err_init_prio;
-+		}
-+
-+		child_cl->prio.cstats = alloc_percpu(struct ceetm_class_stats);
-+		if (!child_cl->prio.cstats) {
-+			pr_err(KBUILD_BASENAME " : %s : alloc_percpu() failed\n",
-+			       __func__);
-+			err = -ENOMEM;
-+			goto err_init_prio_cls;
-+		}
-+
-+		child_cl->common.classid = TC_H_MAKE(sch->handle, (i + 1));
-+		child_cl->refcnt = 1;
-+		child_cl->parent = sch;
-+		child_cl->type = CEETM_PRIO;
-+		child_cl->shaped = priv->shaped;
-+		child_cl->prio.child = NULL;
-+
-+		/* All shaped CQs have CR and ER enabled by default */
-+		child_cl->prio.cr = child_cl->shaped;
-+		child_cl->prio.er = child_cl->shaped;
-+		child_cl->prio.fq = NULL;
-+		child_cl->prio.cq = NULL;
-+
-+		/* Configure the corresponding hardware CQ */
-+		err = ceetm_config_prio_cls(child_cl, dev,
-+					    parent_cl->root.ch, i);
-+		if (err) {
-+			pr_err(KBUILD_BASENAME " : %s : failed to configure the ceetm prio class %X\n",
-+			       __func__, child_cl->common.classid);
-+			goto err_init_prio_cls;
-+		}
-+
-+		/* Add class handle in Qdisc */
-+		ceetm_link_class(sch, &priv->clhash, &child_cl->common);
-+		pr_debug(KBUILD_BASENAME " : %s : added ceetm prio class %X associated with CQ %d and CCG %d\n",
-+			 __func__, child_cl->common.classid,
-+			child_cl->prio.cq->idx, child_cl->prio.ccg->idx);
-+	}
-+
-+	return 0;
-+
-+err_init_prio_cls:
-+	ceetm_cls_destroy(sch, child_cl);
-+err_init_prio:
-+	ceetm_destroy(sch);
-+	return err;
-+}
-+
-+/* Configure a wbfs ceetm qdisc */
-+static int ceetm_init_wbfs(struct Qdisc *sch, struct ceetm_qdisc *priv,
-+			   struct tc_ceetm_qopt *qopt)
-+{
-+	int err, group_b, small_group;
-+	unsigned int i, id, prio_a, prio_b;
-+	struct ceetm_class *parent_cl, *child_cl, *root_cl;
-+	struct Qdisc *parent_qdisc;
-+	struct ceetm_qdisc *parent_priv;
-+	struct qm_ceetm_channel *channel;
-+	struct net_device *dev = qdisc_dev(sch);
-+
-+	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-+
-+	/* Validate inputs */
-+	if (sch->parent == TC_H_ROOT) {
-+		pr_err("CEETM: a wbfs ceetm qdiscs can not be root\n");
-+		err = -EINVAL;
-+		goto err_init_wbfs;
-+	}
-+
-+	/* Obtain the parent prio ceetm qdisc */
-+	parent_qdisc = qdisc_lookup(dev, TC_H_MAJ(sch->parent));
-+	if (strcmp(parent_qdisc->ops->id, ceetm_qdisc_ops.id)) {
-+		pr_err("CEETM: a ceetm qdisc can not be attached to other qdisc/class types\n");
-+		err = -EINVAL;
-+		goto err_init_wbfs;
-+	}
-+
-+	/* Obtain the parent prio ceetm class */
-+	parent_cl = ceetm_find(sch->parent, parent_qdisc);
-+	parent_priv = qdisc_priv(parent_qdisc);
-+
-+	if (!parent_cl || parent_cl->type != CEETM_PRIO) {
-+		pr_err("CEETM: a wbfs ceetm qdiscs can be added only under a prio ceetm class\n");
-+		err = -EINVAL;
-+		goto err_init_wbfs;
-+	}
-+
-+	if (!qopt->qcount || !qopt->qweight[0]) {
-+		pr_err("CEETM: qcount and qweight are mandatory for a wbfs ceetm qdisc\n");
-+		err = -EINVAL;
-+		goto err_init_wbfs;
-+	}
-+
-+	priv->shaped = parent_cl->shaped;
-+
-+	if (!priv->shaped && (qopt->cr || qopt->er)) {
-+		pr_err("CEETM: CR/ER can be enabled only for shaped wbfs ceetm qdiscs\n");
-+		err = -EINVAL;
-+		goto err_init_wbfs;
-+	}
-+
-+	if (priv->shaped && !(qopt->cr || qopt->er)) {
-+		pr_err("CEETM: either CR or ER must be enabled for shaped wbfs ceetm qdiscs\n");
-+		err = -EINVAL;
-+		goto err_init_wbfs;
-+	}
-+
-+	/* Obtain the parent root ceetm class */
-+	root_cl = parent_priv->prio.parent;
-+	if ((root_cl->root.wbfs_grp_a && root_cl->root.wbfs_grp_b) ||
-+	    root_cl->root.wbfs_grp_large) {
-+		pr_err("CEETM: no more wbfs classes are available\n");
-+		err = -EINVAL;
-+		goto err_init_wbfs;
-+	}
-+
-+	if ((root_cl->root.wbfs_grp_a || root_cl->root.wbfs_grp_b) &&
-+	    qopt->qcount == CEETM_MAX_WBFS_QCOUNT) {
-+		pr_err("CEETM: only %d wbfs classes are available\n",
-+		       CEETM_MIN_WBFS_QCOUNT);
-+		err = -EINVAL;
-+		goto err_init_wbfs;
-+	}
-+
-+	priv->wbfs.parent = parent_cl;
-+	parent_cl->prio.child = sch;
-+
-+	priv->wbfs.qcount = qopt->qcount;
-+	priv->wbfs.cr = qopt->cr;
-+	priv->wbfs.er = qopt->er;
-+
-+	channel = root_cl->root.ch;
-+
-+	/* Configure the hardware wbfs channel groups */
-+	if (priv->wbfs.qcount == CEETM_MAX_WBFS_QCOUNT) {
-+		/* Configure the large group A */
-+		priv->wbfs.group_type = WBFS_GRP_LARGE;
-+		small_group = false;
-+		group_b = false;
-+		prio_a = TC_H_MIN(parent_cl->common.classid) - 1;
-+		prio_b = prio_a;
-+
-+	} else if (root_cl->root.wbfs_grp_a) {
-+		/* Configure the group B */
-+		priv->wbfs.group_type = WBFS_GRP_B;
-+
-+		err = qman_ceetm_channel_get_group(channel, &small_group,
-+						   &prio_a, &prio_b);
-+		if (err) {
-+			pr_err(KBUILD_BASENAME " : %s : failed to get group details\n",
-+			       __func__);
-+			goto err_init_wbfs;
-+		}
-+
-+		small_group = true;
-+		group_b = true;
-+		prio_b = TC_H_MIN(parent_cl->common.classid) - 1;
-+		/* If group A isn't configured, configure it as group B */
-+		prio_a = prio_a ? : prio_b;
-+
-+	} else {
-+		/* Configure the small group A */
-+		priv->wbfs.group_type = WBFS_GRP_A;
-+
-+		err = qman_ceetm_channel_get_group(channel, &small_group,
-+						   &prio_a, &prio_b);
-+		if (err) {
-+			pr_err(KBUILD_BASENAME " : %s : failed to get group details\n",
-+			       __func__);
-+			goto err_init_wbfs;
-+		}
-+
-+		small_group = true;
-+		group_b = false;
-+		prio_a = TC_H_MIN(parent_cl->common.classid) - 1;
-+		/* If group B isn't configured, configure it as group A */
-+		prio_b = prio_b ? : prio_a;
-+	}
-+
-+	err = qman_ceetm_channel_set_group(channel, small_group, prio_a,
-+					   prio_b);
-+	if (err)
-+		goto err_init_wbfs;
-+
-+	if (priv->shaped) {
-+		err = qman_ceetm_channel_set_group_cr_eligibility(channel,
-+								  group_b,
-+								priv->wbfs.cr);
-+		if (err) {
-+			pr_err(KBUILD_BASENAME " : %s : failed to set group CR eligibility\n",
-+			       __func__);
-+			goto err_init_wbfs;
-+		}
-+
-+		err = qman_ceetm_channel_set_group_er_eligibility(channel,
-+								  group_b,
-+								priv->wbfs.er);
-+		if (err) {
-+			pr_err(KBUILD_BASENAME " : %s : failed to set group ER eligibility\n",
-+			       __func__);
-+			goto err_init_wbfs;
-+		}
-+	}
-+
-+	/* Create qcount child classes */
-+	for (i = 0; i < priv->wbfs.qcount; i++) {
-+		child_cl = kzalloc(sizeof(*child_cl), GFP_KERNEL);
-+		if (!child_cl) {
-+			pr_err(KBUILD_BASENAME " : %s : kzalloc() failed\n",
-+			       __func__);
-+			err = -ENOMEM;
-+			goto err_init_wbfs;
-+		}
-+
-+		child_cl->wbfs.cstats = alloc_percpu(struct ceetm_class_stats);
-+		if (!child_cl->wbfs.cstats) {
-+			pr_err(KBUILD_BASENAME " : %s : alloc_percpu() failed\n",
-+			       __func__);
-+			err = -ENOMEM;
-+			goto err_init_wbfs_cls;
-+		}
-+
-+		child_cl->common.classid = TC_H_MAKE(sch->handle, (i + 1));
-+		child_cl->refcnt = 1;
-+		child_cl->parent = sch;
-+		child_cl->type = CEETM_WBFS;
-+		child_cl->shaped = priv->shaped;
-+		child_cl->wbfs.fq = NULL;
-+		child_cl->wbfs.cq = NULL;
-+		child_cl->wbfs.weight = qopt->qweight[i];
-+
-+		if (priv->wbfs.group_type == WBFS_GRP_B)
-+			id = WBFS_GRP_B_OFFSET + i;
-+		else
-+			id = WBFS_GRP_A_OFFSET + i;
-+
-+		err = ceetm_config_wbfs_cls(child_cl, dev, channel, id,
-+					    priv->wbfs.group_type);
-+		if (err) {
-+			pr_err(KBUILD_BASENAME " : %s : failed to configure the ceetm wbfs class %X\n",
-+			       __func__, child_cl->common.classid);
-+			goto err_init_wbfs_cls;
-+		}
-+
-+		/* Add class handle in Qdisc */
-+		ceetm_link_class(sch, &priv->clhash, &child_cl->common);
-+		pr_debug(KBUILD_BASENAME " : %s : added ceetm wbfs class %X associated with CQ %d and CCG %d\n",
-+			 __func__, child_cl->common.classid,
-+			 child_cl->wbfs.cq->idx, child_cl->wbfs.ccg->idx);
-+	}
-+
-+	/* Signal the root class that a group has been configured */
-+	switch (priv->wbfs.group_type) {
-+	case WBFS_GRP_LARGE:
-+		root_cl->root.wbfs_grp_large = true;
-+		break;
-+	case WBFS_GRP_A:
-+		root_cl->root.wbfs_grp_a = true;
-+		break;
-+	case WBFS_GRP_B:
-+		root_cl->root.wbfs_grp_b = true;
-+		break;
-+	}
-+
-+	return 0;
-+
-+err_init_wbfs_cls:
-+	ceetm_cls_destroy(sch, child_cl);
-+err_init_wbfs:
-+	ceetm_destroy(sch);
-+	return err;
-+}
-+
-+/* Configure a generic ceetm qdisc */
-+static int ceetm_init(struct Qdisc *sch, struct nlattr *opt)
-+{
-+	struct tc_ceetm_qopt *qopt;
-+	struct nlattr *tb[TCA_CEETM_QOPS + 1];
-+	int ret;
-+	struct ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct net_device *dev = qdisc_dev(sch);
-+
-+	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-+
-+	if (!netif_is_multiqueue(dev))
-+		return -EOPNOTSUPP;
-+
-+	if (!opt) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
-+		return -EINVAL;
-+	}
-+
-+	ret = nla_parse_nested(tb, TCA_CEETM_QOPS, opt, ceetm_policy);
-+	if (ret < 0) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
-+		return ret;
-+	}
-+
-+	if (!tb[TCA_CEETM_QOPS]) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
-+		return -EINVAL;
-+	}
-+
-+	if (TC_H_MIN(sch->handle)) {
-+		pr_err("CEETM: a qdisc should not have a minor\n");
-+		return -EINVAL;
-+	}
-+
-+	qopt = nla_data(tb[TCA_CEETM_QOPS]);
-+
-+	/* Initialize the class hash list. Each qdisc has its own class hash */
-+	ret = qdisc_class_hash_init(&priv->clhash);
-+	if (ret < 0) {
-+		pr_err(KBUILD_BASENAME " : %s : qdisc_class_hash_init failed\n",
-+		       __func__);
-+		return ret;
-+	}
-+
-+	priv->type = qopt->type;
-+
-+	switch (priv->type) {
-+	case CEETM_ROOT:
-+		ret = ceetm_init_root(sch, priv, qopt);
-+		break;
-+	case CEETM_PRIO:
-+		ret = ceetm_init_prio(sch, priv, qopt);
-+		break;
-+	case CEETM_WBFS:
-+		ret = ceetm_init_wbfs(sch, priv, qopt);
-+		break;
-+	default:
-+		pr_err(KBUILD_BASENAME " : %s : invalid qdisc\n", __func__);
-+		ceetm_destroy(sch);
-+		ret = -EINVAL;
-+	}
-+
-+	return ret;
-+}
-+
-+/* Edit a root ceetm qdisc */
-+static int ceetm_change_root(struct Qdisc *sch, struct ceetm_qdisc *priv,
-+			     struct net_device *dev,
-+			     struct tc_ceetm_qopt *qopt)
-+{
-+	int err = 0;
-+	u64 bps;
-+
-+	if (priv->shaped != (bool)qopt->shaped) {
-+		pr_err("CEETM: qdisc %X is %s\n", sch->handle,
-+		       priv->shaped ? "shaped" : "unshaped");
-+		return -EINVAL;
-+	}
-+
-+	/* Nothing to modify for unshaped qdiscs */
-+	if (!priv->shaped)
-+		return 0;
-+
-+	/* Configure the LNI shaper */
-+	if (priv->root.overhead != qopt->overhead) {
-+		err = qman_ceetm_lni_enable_shaper(priv->root.lni, 1,
-+						   qopt->overhead);
-+		if (err)
-+			goto change_err;
-+		priv->root.overhead = qopt->overhead;
-+	}
-+
-+	if (priv->root.rate != qopt->rate) {
-+		bps = qopt->rate << 3; /* Bps -> bps */
-+		err = qman_ceetm_lni_set_commit_rate_bps(priv->root.lni, bps,
-+							 dev->mtu);
-+		if (err)
-+			goto change_err;
-+		priv->root.rate = qopt->rate;
-+	}
-+
-+	if (priv->root.ceil != qopt->ceil) {
-+		bps = qopt->ceil << 3; /* Bps -> bps */
-+		err = qman_ceetm_lni_set_excess_rate_bps(priv->root.lni, bps,
-+							 dev->mtu);
-+		if (err)
-+			goto change_err;
-+		priv->root.ceil = qopt->ceil;
-+	}
-+
-+	return 0;
-+
-+change_err:
-+	pr_err(KBUILD_BASENAME " : %s : failed to configure the root ceetm qdisc %X\n",
-+	       __func__, sch->handle);
-+	return err;
-+}
-+
-+/* Edit a wbfs ceetm qdisc */
-+static int ceetm_change_wbfs(struct Qdisc *sch, struct ceetm_qdisc *priv,
-+			     struct tc_ceetm_qopt *qopt)
-+{
-+	int err;
-+	bool group_b;
-+	struct qm_ceetm_channel *channel;
-+	struct ceetm_class *prio_class, *root_class;
-+	struct ceetm_qdisc *prio_qdisc;
-+
-+	if (qopt->qcount) {
-+		pr_err("CEETM: the qcount can not be modified\n");
-+		return -EINVAL;
-+	}
-+
-+	if (qopt->qweight[0]) {
-+		pr_err("CEETM: the qweight can be modified through the wbfs classes\n");
-+		return -EINVAL;
-+	}
-+
-+	if (!priv->shaped && (qopt->cr || qopt->er)) {
-+		pr_err("CEETM: CR/ER can be enabled only for shaped wbfs ceetm qdiscs\n");
-+		return -EINVAL;
-+	}
-+
-+	if (priv->shaped && !(qopt->cr || qopt->er)) {
-+		pr_err("CEETM: either CR or ER must be enabled for shaped wbfs ceetm qdiscs\n");
-+		return -EINVAL;
-+	}
-+
-+	/* Nothing to modify for unshaped qdiscs */
-+	if (!priv->shaped)
-+		return 0;
-+
-+	prio_class = priv->wbfs.parent;
-+	prio_qdisc = qdisc_priv(prio_class->parent);
-+	root_class = prio_qdisc->prio.parent;
-+	channel = root_class->root.ch;
-+	group_b = priv->wbfs.group_type == WBFS_GRP_B;
-+
-+	if (qopt->cr != priv->wbfs.cr) {
-+		err = qman_ceetm_channel_set_group_cr_eligibility(channel,
-+								  group_b,
-+								  qopt->cr);
-+		if (err)
-+			goto change_err;
-+		priv->wbfs.cr = qopt->cr;
-+	}
-+
-+	if (qopt->er != priv->wbfs.er) {
-+		err = qman_ceetm_channel_set_group_er_eligibility(channel,
-+								  group_b,
-+								  qopt->er);
-+		if (err)
-+			goto change_err;
-+		priv->wbfs.er = qopt->er;
-+	}
-+
-+	return 0;
-+
-+change_err:
-+	pr_err(KBUILD_BASENAME " : %s : failed to configure the wbfs ceetm qdisc %X\n",
-+	       __func__, sch->handle);
-+	return err;
-+}
-+
-+/* Edit a ceetm qdisc */
-+static int ceetm_change(struct Qdisc *sch, struct nlattr *opt)
-+{
-+	struct tc_ceetm_qopt *qopt;
-+	struct nlattr *tb[TCA_CEETM_QOPS + 1];
-+	int ret;
-+	struct ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct net_device *dev = qdisc_dev(sch);
-+
-+	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-+
-+	ret = nla_parse_nested(tb, TCA_CEETM_QOPS, opt, ceetm_policy);
-+	if (ret < 0) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
-+		return ret;
-+	}
-+
-+	if (!tb[TCA_CEETM_QOPS]) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
-+		return -EINVAL;
-+	}
-+
-+	if (TC_H_MIN(sch->handle)) {
-+		pr_err("CEETM: a qdisc should not have a minor\n");
-+		return -EINVAL;
-+	}
-+
-+	qopt = nla_data(tb[TCA_CEETM_QOPS]);
-+
-+	if (priv->type != qopt->type) {
-+		pr_err("CEETM: qdisc %X is not of the provided type\n",
-+		       sch->handle);
-+		return -EINVAL;
-+	}
-+
-+	switch (priv->type) {
-+	case CEETM_ROOT:
-+		ret = ceetm_change_root(sch, priv, dev, qopt);
-+		break;
-+	case CEETM_PRIO:
-+		pr_err("CEETM: prio qdiscs can not be modified\n");
-+		ret = -EINVAL;
-+		break;
-+	case CEETM_WBFS:
-+		ret = ceetm_change_wbfs(sch, priv, qopt);
-+		break;
-+	default:
-+		pr_err(KBUILD_BASENAME " : %s : invalid qdisc\n", __func__);
-+		ret = -EINVAL;
-+	}
-+
-+	return ret;
-+}
-+
-+/* Attach the underlying pfifo qdiscs */
-+static void ceetm_attach(struct Qdisc *sch)
-+{
-+	struct net_device *dev = qdisc_dev(sch);
-+	struct ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct Qdisc *qdisc, *old_qdisc;
-+	unsigned int i;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-+
-+	for (i = 0; i < dev->num_tx_queues; i++) {
-+		qdisc = priv->root.qdiscs[i];
-+		old_qdisc = dev_graft_qdisc(qdisc->dev_queue, qdisc);
-+		if (old_qdisc)
-+			qdisc_destroy(old_qdisc);
-+	}
-+}
-+
-+static unsigned long ceetm_cls_get(struct Qdisc *sch, u32 classid)
-+{
-+	struct ceetm_class *cl;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : classid %X from qdisc %X\n",
-+		 __func__, classid, sch->handle);
-+	cl = ceetm_find(classid, sch);
-+
-+	if (cl)
-+		cl->refcnt++; /* Will decrement in put() */
-+	return (unsigned long)cl;
-+}
-+
-+static void ceetm_cls_put(struct Qdisc *sch, unsigned long arg)
-+{
-+	struct ceetm_class *cl = (struct ceetm_class *)arg;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : classid %X from qdisc %X\n",
-+		 __func__, cl->common.classid, sch->handle);
-+	cl->refcnt--;
-+
-+	if (cl->refcnt == 0)
-+		ceetm_cls_destroy(sch, cl);
-+}
-+
-+static int ceetm_cls_change_root(struct ceetm_class *cl,
-+				 struct tc_ceetm_copt *copt,
-+				 struct net_device *dev)
-+{
-+	int err;
-+	u64 bps;
-+
-+	if ((bool)copt->shaped != cl->shaped) {
-+		pr_err("CEETM: class %X is %s\n", cl->common.classid,
-+		       cl->shaped ? "shaped" : "unshaped");
-+		return -EINVAL;
-+	}
-+
-+	if (cl->shaped && cl->root.rate != copt->rate) {
-+		bps = copt->rate << 3; /* Bps -> bps */
-+		err = qman_ceetm_channel_set_commit_rate_bps(cl->root.ch, bps,
-+							     dev->mtu);
-+		if (err)
-+			goto change_cls_err;
-+		cl->root.rate = copt->rate;
-+	}
-+
-+	if (cl->shaped && cl->root.ceil != copt->ceil) {
-+		bps = copt->ceil << 3; /* Bps -> bps */
-+		err = qman_ceetm_channel_set_excess_rate_bps(cl->root.ch, bps,
-+							     dev->mtu);
-+		if (err)
-+			goto change_cls_err;
-+		cl->root.ceil = copt->ceil;
-+	}
-+
-+	if (!cl->shaped && cl->root.tbl != copt->tbl) {
-+		err = qman_ceetm_channel_set_weight(cl->root.ch, copt->tbl);
-+		if (err)
-+			goto change_cls_err;
-+		cl->root.tbl = copt->tbl;
-+	}
-+
-+	return 0;
-+
-+change_cls_err:
-+	pr_err(KBUILD_BASENAME " : %s : failed to configure the ceetm root class %X\n",
-+	       __func__, cl->common.classid);
-+	return err;
-+}
-+
-+static int ceetm_cls_change_prio(struct ceetm_class *cl,
-+				 struct tc_ceetm_copt *copt)
-+{
-+	int err;
-+
-+	if (!cl->shaped && (copt->cr || copt->er)) {
-+		pr_err("CEETM: only shaped classes can have CR and ER enabled\n");
-+		return -EINVAL;
-+	}
-+
-+	if (cl->prio.cr != (bool)copt->cr) {
-+		err = qman_ceetm_channel_set_cq_cr_eligibility(
-+						cl->prio.cq->parent,
-+						cl->prio.cq->idx,
-+						copt->cr);
-+		if (err)
-+			goto change_cls_err;
-+		cl->prio.cr = copt->cr;
-+	}
-+
-+	if (cl->prio.er != (bool)copt->er) {
-+		err = qman_ceetm_channel_set_cq_er_eligibility(
-+						cl->prio.cq->parent,
-+						cl->prio.cq->idx,
-+						copt->er);
-+		if (err)
-+			goto change_cls_err;
-+		cl->prio.er = copt->er;
-+	}
-+
-+	return 0;
-+
-+change_cls_err:
-+	pr_err(KBUILD_BASENAME " : %s : failed to configure the ceetm prio class %X\n",
-+	       __func__, cl->common.classid);
-+	return err;
-+}
-+
-+static int ceetm_cls_change_wbfs(struct ceetm_class *cl,
-+				 struct tc_ceetm_copt *copt)
-+{
-+	int err;
-+
-+	if (copt->weight != cl->wbfs.weight) {
-+		/* Configure the CQ weight: real number multiplied by 100 to
-+		 * get rid of the fraction
-+		 */
-+		err = qman_ceetm_set_queue_weight_in_ratio(cl->wbfs.cq,
-+							   copt->weight * 100);
-+
-+		if (err) {
-+			pr_err(KBUILD_BASENAME " : %s : failed to configure the ceetm wbfs class %X\n",
-+			       __func__, cl->common.classid);
-+			return err;
-+		}
-+
-+		cl->wbfs.weight = copt->weight;
-+	}
-+
-+	return 0;
-+}
-+
-+/* Add a ceetm root class or configure a ceetm root/prio/wbfs class */
-+static int ceetm_cls_change(struct Qdisc *sch, u32 classid, u32 parentid,
-+			    struct nlattr **tca, unsigned long *arg)
-+{
-+	int err;
-+	u64 bps;
-+	struct ceetm_qdisc *priv;
-+	struct ceetm_class *cl = (struct ceetm_class *)*arg;
-+	struct nlattr *opt = tca[TCA_OPTIONS];
-+	struct nlattr *tb[__TCA_CEETM_MAX];
-+	struct tc_ceetm_copt *copt;
-+	struct qm_ceetm_channel *channel;
-+	struct net_device *dev = qdisc_dev(sch);
-+
-+	pr_debug(KBUILD_BASENAME " : %s : classid %X under qdisc %X\n",
-+		 __func__, classid, sch->handle);
-+
-+	if (strcmp(sch->ops->id, ceetm_qdisc_ops.id)) {
-+		pr_err("CEETM: a ceetm class can not be attached to other qdisc/class types\n");
-+		return -EINVAL;
-+	}
-+
-+	priv = qdisc_priv(sch);
-+
-+	if (!opt) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
-+		return -EINVAL;
-+	}
-+
-+	if (!cl && sch->handle != parentid) {
-+		pr_err("CEETM: classes can be attached to the root ceetm qdisc only\n");
-+		return -EINVAL;
-+	}
-+
-+	if (!cl && priv->type != CEETM_ROOT) {
-+		pr_err("CEETM: only root ceetm classes can be attached to the root ceetm qdisc\n");
-+		return -EINVAL;
-+	}
-+
-+	err = nla_parse_nested(tb, TCA_CEETM_COPT, opt, ceetm_policy);
-+	if (err < 0) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
-+		return -EINVAL;
-+	}
-+
-+	if (!tb[TCA_CEETM_COPT]) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
-+		return -EINVAL;
-+	}
-+
-+	if (TC_H_MIN(classid) >= PFIFO_MIN_OFFSET) {
-+		pr_err("CEETM: only minors 0x01 to 0x20 can be used for ceetm root classes\n");
-+		return -EINVAL;
-+	}
-+
-+	copt = nla_data(tb[TCA_CEETM_COPT]);
-+
-+	/* Configure an existing ceetm class */
-+	if (cl) {
-+		if (copt->type != cl->type) {
-+			pr_err("CEETM: class %X is not of the provided type\n",
-+			       cl->common.classid);
-+			return -EINVAL;
-+		}
-+
-+		switch (copt->type) {
-+		case CEETM_ROOT:
-+			return ceetm_cls_change_root(cl, copt, dev);
-+
-+		case CEETM_PRIO:
-+			return ceetm_cls_change_prio(cl, copt);
-+
-+		case CEETM_WBFS:
-+			return ceetm_cls_change_wbfs(cl, copt);
-+
-+		default:
-+			pr_err(KBUILD_BASENAME " : %s : invalid class\n",
-+			       __func__);
-+			return -EINVAL;
-+		}
-+	}
-+
-+	/* Add a new root ceetm class */
-+	if (copt->type != CEETM_ROOT) {
-+		pr_err("CEETM: only root ceetm classes can be attached to the root ceetm qdisc\n");
-+		return -EINVAL;
-+	}
-+
-+	if (copt->shaped && !priv->shaped) {
-+		pr_err("CEETM: can not add a shaped ceetm root class under an unshaped ceetm root qdisc\n");
-+		return -EINVAL;
-+	}
-+
-+	cl = kzalloc(sizeof(*cl), GFP_KERNEL);
-+	if (!cl)
-+		return -ENOMEM;
-+
-+	cl->type = copt->type;
-+	cl->shaped = copt->shaped;
-+	cl->root.rate = copt->rate;
-+	cl->root.ceil = copt->ceil;
-+	cl->root.tbl = copt->tbl;
-+
-+	cl->common.classid = classid;
-+	cl->refcnt = 1;
-+	cl->parent = sch;
-+	cl->root.child = NULL;
-+	cl->root.wbfs_grp_a = false;
-+	cl->root.wbfs_grp_b = false;
-+	cl->root.wbfs_grp_large = false;
-+
-+	/* Claim a CEETM channel */
-+	err = qman_ceetm_channel_claim(&channel, priv->root.lni);
-+	if (err) {
-+		pr_err(KBUILD_BASENAME " : %s : failed to claim a channel\n",
-+		       __func__);
-+		goto claim_err;
-+	}
-+
-+	cl->root.ch = channel;
-+
-+	if (cl->shaped) {
-+		/* Configure the channel shaper */
-+		err = qman_ceetm_channel_enable_shaper(channel, 1);
-+		if (err)
-+			goto channel_err;
-+
-+		bps = cl->root.rate << 3; /* Bps -> bps */
-+		err = qman_ceetm_channel_set_commit_rate_bps(channel, bps,
-+							     dev->mtu);
-+		if (err)
-+			goto channel_err;
-+
-+		bps = cl->root.ceil << 3; /* Bps -> bps */
-+		err = qman_ceetm_channel_set_excess_rate_bps(channel, bps,
-+							     dev->mtu);
-+		if (err)
-+			goto channel_err;
-+
-+	} else {
-+		/* Configure the uFQ algorithm */
-+		err = qman_ceetm_channel_set_weight(channel, cl->root.tbl);
-+		if (err)
-+			goto channel_err;
-+	}
-+
-+	/* Add class handle in Qdisc */
-+	ceetm_link_class(sch, &priv->clhash, &cl->common);
-+
-+	pr_debug(KBUILD_BASENAME " : %s : configured class %X associated with channel %d\n",
-+		 __func__, classid, channel->idx);
-+	*arg = (unsigned long)cl;
-+	return 0;
-+
-+channel_err:
-+	pr_err(KBUILD_BASENAME " : %s : failed to configure the channel %d\n",
-+	       __func__, channel->idx);
-+	if (qman_ceetm_channel_release(channel))
-+		pr_err(KBUILD_BASENAME " : %s : failed to release the channel %d\n",
-+		       __func__, channel->idx);
-+claim_err:
-+	kfree(cl);
-+	return err;
-+}
-+
-+static void ceetm_cls_walk(struct Qdisc *sch, struct qdisc_walker *arg)
-+{
-+	struct ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct ceetm_class *cl;
-+	unsigned int i;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-+
-+	if (arg->stop)
-+		return;
-+
-+	for (i = 0; i < priv->clhash.hashsize; i++) {
-+		hlist_for_each_entry(cl, &priv->clhash.hash[i], common.hnode) {
-+			if (arg->count < arg->skip) {
-+				arg->count++;
-+				continue;
-+			}
-+			if (arg->fn(sch, (unsigned long)cl, arg) < 0) {
-+				arg->stop = 1;
-+				return;
-+			}
-+			arg->count++;
-+		}
-+	}
-+}
-+
-+static int ceetm_cls_dump(struct Qdisc *sch, unsigned long arg,
-+			  struct sk_buff *skb, struct tcmsg *tcm)
-+{
-+	struct ceetm_class *cl = (struct ceetm_class *)arg;
-+	struct nlattr *nest;
-+	struct tc_ceetm_copt copt;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n",
-+		 __func__, cl->common.classid, sch->handle);
-+
-+	sch_tree_lock(sch);
-+
-+	tcm->tcm_parent = ((struct Qdisc *)cl->parent)->handle;
-+	tcm->tcm_handle = cl->common.classid;
-+
-+	memset(&copt, 0, sizeof(copt));
-+
-+	copt.shaped = cl->shaped;
-+	copt.type = cl->type;
-+
-+	switch (cl->type) {
-+	case CEETM_ROOT:
-+		if (cl->root.child)
-+			tcm->tcm_info = cl->root.child->handle;
-+
-+		copt.rate = cl->root.rate;
-+		copt.ceil = cl->root.ceil;
-+		copt.tbl = cl->root.tbl;
-+		break;
-+
-+	case CEETM_PRIO:
-+		if (cl->prio.child)
-+			tcm->tcm_info = cl->prio.child->handle;
-+
-+		copt.cr = cl->prio.cr;
-+		copt.er = cl->prio.er;
-+		break;
-+
-+	case CEETM_WBFS:
-+		copt.weight = cl->wbfs.weight;
-+		break;
-+	}
-+
-+	nest = nla_nest_start(skb, TCA_OPTIONS);
-+	if (!nest)
-+		goto nla_put_failure;
-+	if (nla_put(skb, TCA_CEETM_COPT, sizeof(copt), &copt))
-+		goto nla_put_failure;
-+	nla_nest_end(skb, nest);
-+	sch_tree_unlock(sch);
-+	return skb->len;
-+
-+nla_put_failure:
-+	sch_tree_unlock(sch);
-+	nla_nest_cancel(skb, nest);
-+	return -EMSGSIZE;
-+}
-+
-+static int ceetm_cls_delete(struct Qdisc *sch, unsigned long arg)
-+{
-+	struct ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct ceetm_class *cl = (struct ceetm_class *)arg;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n",
-+		 __func__, cl->common.classid, sch->handle);
-+
-+	sch_tree_lock(sch);
-+	qdisc_class_hash_remove(&priv->clhash, &cl->common);
-+	cl->refcnt--;
-+
-+	/* The refcnt should be at least 1 since we have incremented it in
-+	 * get(). Will decrement again in put() where we will call destroy()
-+	 * to actually free the memory if it reaches 0.
-+	 */
-+	WARN_ON(cl->refcnt == 0);
-+
-+	sch_tree_unlock(sch);
-+	return 0;
-+}
-+
-+/* Get the class' child qdisc, if any */
-+static struct Qdisc *ceetm_cls_leaf(struct Qdisc *sch, unsigned long arg)
-+{
-+	struct ceetm_class *cl = (struct ceetm_class *)arg;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n",
-+		 __func__, cl->common.classid, sch->handle);
-+
-+	switch (cl->type) {
-+	case CEETM_ROOT:
-+		return cl->root.child;
-+
-+	case CEETM_PRIO:
-+		return cl->prio.child;
-+	}
-+
-+	return NULL;
-+}
-+
-+static int ceetm_cls_graft(struct Qdisc *sch, unsigned long arg,
-+			   struct Qdisc *new, struct Qdisc **old)
-+{
-+	if (new && strcmp(new->ops->id, ceetm_qdisc_ops.id)) {
-+		pr_err("CEETM: only ceetm qdiscs can be attached to ceetm classes\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	return 0;
-+}
-+
-+static int ceetm_cls_dump_stats(struct Qdisc *sch, unsigned long arg,
-+				struct gnet_dump *d)
-+{
-+	unsigned int i;
-+	struct ceetm_class *cl = (struct ceetm_class *)arg;
-+	struct gnet_stats_basic_packed tmp_bstats;
-+	struct ceetm_class_stats *cstats = NULL;
-+	struct qm_ceetm_cq *cq = NULL;
-+	struct tc_ceetm_xstats xstats;
-+
-+	memset(&xstats, 0, sizeof(xstats));
-+	memset(&tmp_bstats, 0, sizeof(tmp_bstats));
-+
-+	switch (cl->type) {
-+	case CEETM_ROOT:
-+		return 0;
-+	case CEETM_PRIO:
-+		cq = cl->prio.cq;
-+		break;
-+	case CEETM_WBFS:
-+		cq = cl->wbfs.cq;
-+		break;
-+	}
-+
-+	for_each_online_cpu(i) {
-+		switch (cl->type) {
-+		case CEETM_PRIO:
-+			cstats = per_cpu_ptr(cl->prio.cstats, i);
-+			break;
-+		case CEETM_WBFS:
-+			cstats = per_cpu_ptr(cl->wbfs.cstats, i);
-+			break;
-+		}
-+
-+		if (cstats) {
-+			xstats.ern_drop_count += cstats->ern_drop_count;
-+			xstats.congested_count += cstats->congested_count;
-+			tmp_bstats.bytes += cstats->bstats.bytes;
-+			tmp_bstats.packets += cstats->bstats.packets;
-+		}
-+	}
-+
-+	if (gnet_stats_copy_basic(d, NULL, &tmp_bstats) < 0)
-+		return -1;
-+
-+	if (cq && qman_ceetm_cq_get_dequeue_statistics(cq, 0,
-+						       &xstats.frame_count,
-+						       &xstats.byte_count))
-+		return -1;
-+
-+	return gnet_stats_copy_app(d, &xstats, sizeof(xstats));
-+}
-+
-+static struct tcf_proto **ceetm_tcf_chain(struct Qdisc *sch, unsigned long arg)
-+{
-+	struct ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct ceetm_class *cl = (struct ceetm_class *)arg;
-+	struct tcf_proto **fl = cl ? &cl->filter_list : &priv->filter_list;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n", __func__,
-+		 cl ? cl->common.classid : 0, sch->handle);
-+	return fl;
-+}
-+
-+static unsigned long ceetm_tcf_bind(struct Qdisc *sch, unsigned long parent,
-+				    u32 classid)
-+{
-+	struct ceetm_class *cl = ceetm_find(classid, sch);
-+
-+	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n", __func__,
-+		 cl ? cl->common.classid : 0, sch->handle);
-+	return (unsigned long)cl;
-+}
-+
-+static void ceetm_tcf_unbind(struct Qdisc *sch, unsigned long arg)
-+{
-+	struct ceetm_class *cl = (struct ceetm_class *)arg;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n", __func__,
-+		 cl ? cl->common.classid : 0, sch->handle);
-+}
-+
-+const struct Qdisc_class_ops ceetm_cls_ops = {
-+	.graft		=	ceetm_cls_graft,
-+	.leaf		=	ceetm_cls_leaf,
-+	.get		=	ceetm_cls_get,
-+	.put		=	ceetm_cls_put,
-+	.change		=	ceetm_cls_change,
-+	.delete		=	ceetm_cls_delete,
-+	.walk		=	ceetm_cls_walk,
-+	.tcf_chain	=	ceetm_tcf_chain,
-+	.bind_tcf	=	ceetm_tcf_bind,
-+	.unbind_tcf	=	ceetm_tcf_unbind,
-+	.dump		=	ceetm_cls_dump,
-+	.dump_stats	=	ceetm_cls_dump_stats,
-+};
-+
-+struct Qdisc_ops ceetm_qdisc_ops __read_mostly = {
-+	.id		=	"ceetm",
-+	.priv_size	=	sizeof(struct ceetm_qdisc),
-+	.cl_ops		=	&ceetm_cls_ops,
-+	.init		=	ceetm_init,
-+	.destroy	=	ceetm_destroy,
-+	.change		=	ceetm_change,
-+	.dump		=	ceetm_dump,
-+	.attach		=	ceetm_attach,
-+	.owner		=	THIS_MODULE,
-+};
-+
-+/* Run the filters and classifiers attached to the qdisc on the provided skb */
-+static struct ceetm_class *ceetm_classify(struct sk_buff *skb,
-+					  struct Qdisc *sch, int *qerr,
-+					  bool *act_drop)
-+{
-+	struct ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct ceetm_class *cl = NULL, *wbfs_cl;
-+	struct tcf_result res;
-+	struct tcf_proto *tcf;
-+	int result;
-+
-+	*qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
-+	tcf = priv->filter_list;
-+	while (tcf && (result = tc_classify(skb, tcf, &res)) >= 0) {
-+#ifdef CONFIG_NET_CLS_ACT
-+		switch (result) {
-+		case TC_ACT_QUEUED:
-+		case TC_ACT_STOLEN:
-+			*qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
-+		case TC_ACT_SHOT:
-+			/* No valid class found due to action */
-+			*act_drop = true;
-+			return NULL;
-+		}
-+#endif
-+		cl = (void *)res.class;
-+		if (!cl) {
-+			if (res.classid == sch->handle) {
-+				/* The filter leads to the qdisc */
-+				/* TODO default qdisc */
-+				return NULL;
-+			}
-+
-+			cl = ceetm_find(res.classid, sch);
-+			if (!cl)
-+				/* The filter leads to an invalid class */
-+				break;
-+		}
-+
-+		/* The class might have its own filters attached */
-+		tcf = cl->filter_list;
-+	}
-+
-+	if (!cl) {
-+		/* No valid class found */
-+		/* TODO default qdisc */
-+		return NULL;
-+	}
-+
-+	switch (cl->type) {
-+	case CEETM_ROOT:
-+		if (cl->root.child) {
-+			/* Run the prio qdisc classifiers */
-+			return ceetm_classify(skb, cl->root.child, qerr,
-+						act_drop);
-+		} else {
-+			/* The root class does not have a child prio qdisc */
-+			/* TODO default qdisc */
-+			return NULL;
-+		}
-+	case CEETM_PRIO:
-+		if (cl->prio.child) {
-+			/* If filters lead to a wbfs class, return it.
-+			 * Otherwise, return the prio class
-+			 */
-+			wbfs_cl = ceetm_classify(skb, cl->prio.child, qerr,
-+						 act_drop);
-+			/* A NULL result might indicate either an erroneous
-+			 * filter, or no filters at all. We will assume the
-+			 * latter
-+			 */
-+			return wbfs_cl ? : cl;
-+		}
-+	}
-+
-+	/* For wbfs and childless prio classes, return the class directly */
-+	return cl;
-+}
-+
-+int __hot ceetm_tx(struct sk_buff *skb, struct net_device *net_dev)
-+{
-+	int ret;
-+	bool act_drop = false;
-+	struct Qdisc *sch = net_dev->qdisc;
-+	struct ceetm_class *cl;
-+	struct dpa_priv_s *priv_dpa;
-+	struct qman_fq *egress_fq, *conf_fq;
-+	struct ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct ceetm_qdisc_stats *qstats = this_cpu_ptr(priv->root.qstats);
-+	struct ceetm_class_stats *cstats;
-+	const int queue_mapping = dpa_get_queue_mapping(skb);
-+	spinlock_t *root_lock = qdisc_lock(sch);
-+
-+	spin_lock(root_lock);
-+	cl = ceetm_classify(skb, sch, &ret, &act_drop);
-+	spin_unlock(root_lock);
-+
-+#ifdef CONFIG_NET_CLS_ACT
-+	if (act_drop) {
-+		if (ret & __NET_XMIT_BYPASS)
-+			qstats->drops++;
-+		goto drop;
-+	}
-+#endif
-+	/* TODO default class */
-+	if (unlikely(!cl)) {
-+		qstats->drops++;
-+		goto drop;
-+	}
-+
-+	priv_dpa = netdev_priv(net_dev);
-+	conf_fq = priv_dpa->conf_fqs[queue_mapping];
-+
-+	/* Choose the proper tx fq and update the basic stats (bytes and
-+	 * packets sent by the class)
-+	 */
-+	switch (cl->type) {
-+	case CEETM_PRIO:
-+		egress_fq = &cl->prio.fq->fq;
-+		cstats = this_cpu_ptr(cl->prio.cstats);
-+		break;
-+	case CEETM_WBFS:
-+		egress_fq = &cl->wbfs.fq->fq;
-+		cstats = this_cpu_ptr(cl->wbfs.cstats);
-+		break;
-+	default:
-+		qstats->drops++;
-+		goto drop;
-+	}
-+
-+	bstats_update(&cstats->bstats, skb);
-+	return dpa_tx_extended(skb, net_dev, egress_fq, conf_fq);
-+
-+drop:
-+	dev_kfree_skb_any(skb);
-+	return NET_XMIT_SUCCESS;
-+}
-+
-+static int __init ceetm_register(void)
-+{
-+	int _errno = 0;
-+
-+	pr_info(KBUILD_MODNAME ": " DPA_CEETM_DESCRIPTION "\n");
-+
-+	_errno = register_qdisc(&ceetm_qdisc_ops);
-+	if (unlikely(_errno))
-+		pr_err(KBUILD_MODNAME
-+		       ": %s:%hu:%s(): register_qdisc() = %d\n",
-+		       KBUILD_BASENAME ".c", __LINE__, __func__, _errno);
-+
-+	return _errno;
-+}
-+
-+static void __exit ceetm_unregister(void)
-+{
-+	pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
-+		 KBUILD_BASENAME ".c", __func__);
-+
-+	unregister_qdisc(&ceetm_qdisc_ops);
-+}
-+
-+module_init(ceetm_register);
-+module_exit(ceetm_unregister);
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h
-@@ -0,0 +1,236 @@
-+/* Copyright 2008-2016 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __DPAA_ETH_CEETM_H
-+#define __DPAA_ETH_CEETM_H
-+
-+#include <net/pkt_sched.h>
-+#include <net/netlink.h>
-+#include <lnxwrp_fm.h>
-+
-+#include "mac.h"
-+#include "dpaa_eth_common.h"
-+
-+/* Mask to determine the sub-portal id from a channel number */
-+#define CHANNEL_SP_MASK		0x1f
-+/* The number of the last channel that services DCP0, connected to FMan 0.
-+ * Value validated for B4 and T series platforms.
-+ */
-+#define DCP0_MAX_CHANNEL	0x80f
-+/* A2V=1 - field A2 is valid
-+ * A0V=1 - field A0 is valid - enables frame confirmation
-+ * OVOM=1 - override operation mode bits with values from A2
-+ * EBD=1 - external buffers are deallocated at the end of the FMan flow
-+ * NL=0 - the BMI releases all the internal buffers
-+ */
-+#define CEETM_CONTEXT_A		0x1a00000080000000
-+/* The ratio between the superior and inferior congestion state thresholds. The
-+ * lower threshold is set to 7/8 of the superior one (as the default for WQ
-+ * scheduling).
-+ */
-+#define CEETM_CCGR_RATIO	0.875
-+/* For functional purposes, there are num_tx_queues pfifo qdiscs through which
-+ * frames reach the driver. Their handles start from 1:21. Handles 1:1 to 1:20
-+ * are reserved for the maximum 32 CEETM channels (majors and minors are in
-+ * hex).
-+ */
-+#define PFIFO_MIN_OFFSET	0x21
-+
-+/* A maximum of 8 CQs can be linked to a CQ channel or to a WBFS scheduler. */
-+#define CEETM_MAX_PRIO_QCOUNT	8
-+#define CEETM_MAX_WBFS_QCOUNT	8
-+#define CEETM_MIN_WBFS_QCOUNT	4
-+
-+/* The id offsets of the CQs belonging to WBFS groups (ids 8-11/15 for group A
-+ * and/or 12-15 for group B).
-+ */
-+#define WBFS_GRP_A_OFFSET	8
-+#define WBFS_GRP_B_OFFSET	12
-+
-+#define WBFS_GRP_A	1
-+#define WBFS_GRP_B	2
-+#define WBFS_GRP_LARGE	3
-+
-+enum {
-+	TCA_CEETM_UNSPEC,
-+	TCA_CEETM_COPT,
-+	TCA_CEETM_QOPS,
-+	__TCA_CEETM_MAX,
-+};
-+
-+/* CEETM configuration types */
-+enum {
-+	CEETM_ROOT = 1,
-+	CEETM_PRIO,
-+	CEETM_WBFS
-+};
-+
-+#define TCA_CEETM_MAX (__TCA_CEETM_MAX - 1)
-+extern const struct nla_policy ceetm_policy[TCA_CEETM_MAX + 1];
-+
-+struct ceetm_class;
-+struct ceetm_qdisc_stats;
-+struct ceetm_class_stats;
-+
-+struct ceetm_fq {
-+	struct qman_fq fq;
-+	struct net_device *net_dev;
-+	struct ceetm_class *ceetm_cls;
-+};
-+
-+struct root_q {
-+	struct Qdisc **qdiscs;
-+	__u16 overhead;
-+	__u32 rate;
-+	__u32 ceil;
-+	struct qm_ceetm_sp *sp;
-+	struct qm_ceetm_lni *lni;
-+	struct ceetm_qdisc_stats __percpu *qstats;
-+};
-+
-+struct prio_q {
-+	__u16 qcount;
-+	struct ceetm_class *parent;
-+};
-+
-+struct wbfs_q {
-+	__u16 qcount;
-+	int group_type;
-+	struct ceetm_class *parent;
-+	__u16 cr;
-+	__u16 er;
-+};
-+
-+struct ceetm_qdisc {
-+	int type; /* LNI/CHNL/WBFS */
-+	bool shaped;
-+	union {
-+		struct root_q root;
-+		struct prio_q prio;
-+		struct wbfs_q wbfs;
-+	};
-+	struct Qdisc_class_hash clhash;
-+	struct tcf_proto *filter_list; /* qdisc attached filters */
-+};
-+
-+/* CEETM Qdisc configuration parameters */
-+struct tc_ceetm_qopt {
-+	__u32 type;
-+	__u16 shaped;
-+	__u16 qcount;
-+	__u16 overhead;
-+	__u32 rate;
-+	__u32 ceil;
-+	__u16 cr;
-+	__u16 er;
-+	__u8 qweight[CEETM_MAX_WBFS_QCOUNT];
-+};
-+
-+struct root_c {
-+	unsigned int rate;
-+	unsigned int ceil;
-+	unsigned int tbl;
-+	bool wbfs_grp_a;
-+	bool wbfs_grp_b;
-+	bool wbfs_grp_large;
-+	struct Qdisc *child;
-+	struct qm_ceetm_channel *ch;
-+};
-+
-+struct prio_c {
-+	bool cr;
-+	bool er;
-+	struct ceetm_fq *fq; /* Hardware FQ instance Handle */
-+	struct qm_ceetm_lfq *lfq;
-+	struct qm_ceetm_cq *cq; /* Hardware Class Queue instance Handle */
-+	struct qm_ceetm_ccg *ccg;
-+	/* only one wbfs can be linked to one priority CQ */
-+	struct Qdisc *child;
-+	struct ceetm_class_stats __percpu *cstats;
-+};
-+
-+struct wbfs_c {
-+	__u8 weight; /* The weight of the class between 1 and 248 */
-+	struct ceetm_fq *fq; /* Hardware FQ instance Handle */
-+	struct qm_ceetm_lfq *lfq;
-+	struct qm_ceetm_cq *cq; /* Hardware Class Queue instance Handle */
-+	struct qm_ceetm_ccg *ccg;
-+	struct ceetm_class_stats __percpu *cstats;
-+};
-+
-+struct ceetm_class {
-+	struct Qdisc_class_common common;
-+	int refcnt; /* usage count of this class */
-+	struct tcf_proto *filter_list; /* class attached filters */
-+	struct Qdisc *parent;
-+	bool shaped;
-+	int type; /* ROOT/PRIO/WBFS */
-+	union {
-+		struct root_c root;
-+		struct prio_c prio;
-+		struct wbfs_c wbfs;
-+	};
-+};
-+
-+/* CEETM Class configuration parameters */
-+struct tc_ceetm_copt {
-+	__u32 type;
-+	__u16 shaped;
-+	__u32 rate;
-+	__u32 ceil;
-+	__u16 tbl;
-+	__u16 cr;
-+	__u16 er;
-+	__u8 weight;
-+};
-+
-+/* CEETM stats */
-+struct ceetm_qdisc_stats {
-+	__u32 drops;
-+};
-+
-+struct ceetm_class_stats {
-+	/* Software counters */
-+	struct gnet_stats_basic_packed bstats;
-+	__u32 ern_drop_count;
-+	__u32 congested_count;
-+};
-+
-+struct tc_ceetm_xstats {
-+	__u32 ern_drop_count;
-+	__u32 congested_count;
-+	/* Hardware counters */
-+	__u64 frame_count;
-+	__u64 byte_count;
-+};
-+
-+int __hot ceetm_tx(struct sk_buff *skb, struct net_device *net_dev);
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-@@ -0,0 +1,1812 @@
-+/* Copyright 2008-2013 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_net.h>
-+#include <linux/etherdevice.h>
-+#include <linux/kthread.h>
-+#include <linux/percpu.h>
-+#include <linux/highmem.h>
-+#include <linux/sort.h>
-+#include <linux/fsl_qman.h>
-+#include <linux/ip.h>
-+#include <linux/ipv6.h>
-+#include <linux/if_vlan.h>	/* vlan_eth_hdr */
-+#include "dpaa_eth.h"
-+#include "dpaa_eth_common.h"
-+#ifdef CONFIG_FSL_DPAA_1588
-+#include "dpaa_1588.h"
-+#endif
-+#ifdef CONFIG_FSL_DPAA_DBG_LOOP
-+#include "dpaa_debugfs.h"
-+#endif /* CONFIG_FSL_DPAA_DBG_LOOP */
-+#include "mac.h"
-+
-+/* Size in bytes of the FQ taildrop threshold */
-+#define DPA_FQ_TD		0x200000
-+
-+#ifdef CONFIG_PTP_1588_CLOCK_DPAA
-+struct ptp_priv_s ptp_priv;
-+#endif
-+
-+static struct dpa_bp *dpa_bp_array[64];
-+
-+int dpa_max_frm;
-+EXPORT_SYMBOL(dpa_max_frm);
-+
-+int dpa_rx_extra_headroom;
-+EXPORT_SYMBOL(dpa_rx_extra_headroom);
-+
-+int dpa_num_cpus = NR_CPUS;
-+
-+static const struct fqid_cell tx_confirm_fqids[] = {
-+	{0, DPAA_ETH_TX_QUEUES}
-+};
-+
-+static struct fqid_cell default_fqids[][3] = {
-+	[RX] = { {0, 1}, {0, 1}, {0, DPAA_ETH_RX_QUEUES} },
-+	[TX] = { {0, 1}, {0, 1}, {0, DPAA_ETH_TX_QUEUES} }
-+};
-+
-+static const char fsl_qman_frame_queues[][25] = {
-+	[RX] = "fsl,qman-frame-queues-rx",
-+	[TX] = "fsl,qman-frame-queues-tx"
-+};
-+#ifdef CONFIG_FSL_DPAA_HOOKS
-+/* A set of callbacks for hooking into the fastpath at different points. */
-+struct dpaa_eth_hooks_s dpaa_eth_hooks;
-+EXPORT_SYMBOL(dpaa_eth_hooks);
-+/* This function should only be called on the probe paths, since it makes no
-+ * effort to guarantee consistency of the destination hooks structure.
-+ */
-+void fsl_dpaa_eth_set_hooks(struct dpaa_eth_hooks_s *hooks)
-+{
-+	if (hooks)
-+		dpaa_eth_hooks = *hooks;
-+	else
-+		pr_err("NULL pointer to hooks!\n");
-+}
-+EXPORT_SYMBOL(fsl_dpaa_eth_set_hooks);
-+#endif
-+
-+int dpa_netdev_init(struct net_device *net_dev,
-+		    const uint8_t *mac_addr,
-+		    uint16_t tx_timeout)
-+{
-+	int err;
-+	struct dpa_priv_s *priv = netdev_priv(net_dev);
-+	struct device *dev = net_dev->dev.parent;
-+
-+	net_dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
-+
-+	net_dev->features |= net_dev->hw_features;
-+	net_dev->vlan_features = net_dev->features;
-+
-+	memcpy(net_dev->perm_addr, mac_addr, net_dev->addr_len);
-+	memcpy(net_dev->dev_addr, mac_addr, net_dev->addr_len);
-+
-+	net_dev->ethtool_ops = &dpa_ethtool_ops;
-+
-+	net_dev->needed_headroom = priv->tx_headroom;
-+	net_dev->watchdog_timeo = msecs_to_jiffies(tx_timeout);
-+
-+	err = register_netdev(net_dev);
-+	if (err < 0) {
-+		dev_err(dev, "register_netdev() = %d\n", err);
-+		return err;
-+	}
-+
-+#ifdef CONFIG_FSL_DPAA_DBG_LOOP
-+	/* create debugfs entry for this net_device */
-+	err = dpa_netdev_debugfs_create(net_dev);
-+	if (err) {
-+		unregister_netdev(net_dev);
-+		return err;
-+	}
-+#endif /* CONFIG_FSL_DPAA_DBG_LOOP */
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(dpa_netdev_init);
-+
-+int __cold dpa_start(struct net_device *net_dev)
-+{
-+	int err, i;
-+	struct dpa_priv_s *priv;
-+	struct mac_device *mac_dev;
-+
-+	priv = netdev_priv(net_dev);
-+	mac_dev = priv->mac_dev;
-+
-+	err = mac_dev->init_phy(net_dev, priv->mac_dev);
-+	if (err < 0) {
-+		if (netif_msg_ifup(priv))
-+			netdev_err(net_dev, "init_phy() = %d\n", err);
-+		return err;
-+	}
-+
-+	for_each_port_device(i, mac_dev->port_dev) {
-+		err = fm_port_enable(mac_dev->port_dev[i]);
-+		if (err)
-+			goto mac_start_failed;
-+	}
-+
-+	err = priv->mac_dev->start(mac_dev);
-+	if (err < 0) {
-+		if (netif_msg_ifup(priv))
-+			netdev_err(net_dev, "mac_dev->start() = %d\n", err);
-+		goto mac_start_failed;
-+	}
-+
-+	netif_tx_start_all_queues(net_dev);
-+
-+	return 0;
-+
-+mac_start_failed:
-+	for_each_port_device(i, mac_dev->port_dev)
-+		fm_port_disable(mac_dev->port_dev[i]);
-+
-+	return err;
-+}
-+EXPORT_SYMBOL(dpa_start);
-+
-+int __cold dpa_stop(struct net_device *net_dev)
-+{
-+	int _errno, i, err;
-+	struct dpa_priv_s *priv;
-+	struct mac_device *mac_dev;
-+
-+	priv = netdev_priv(net_dev);
-+	mac_dev = priv->mac_dev;
-+
-+	netif_tx_stop_all_queues(net_dev);
-+	/* Allow the Fman (Tx) port to process in-flight frames before we
-+	 * try switching it off.
-+	 */
-+	usleep_range(5000, 10000);
-+
-+	_errno = mac_dev->stop(mac_dev);
-+	if (unlikely(_errno < 0))
-+		if (netif_msg_ifdown(priv))
-+			netdev_err(net_dev, "mac_dev->stop() = %d\n",
-+					_errno);
-+
-+	for_each_port_device(i, mac_dev->port_dev) {
-+		err = fm_port_disable(mac_dev->port_dev[i]);
-+		_errno = err ? err : _errno;
-+	}
-+
-+	if (mac_dev->phy_dev)
-+		phy_disconnect(mac_dev->phy_dev);
-+	mac_dev->phy_dev = NULL;
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(dpa_stop);
-+
-+void __cold dpa_timeout(struct net_device *net_dev)
-+{
-+	const struct dpa_priv_s	*priv;
-+	struct dpa_percpu_priv_s *percpu_priv;
-+
-+	priv = netdev_priv(net_dev);
-+	percpu_priv = raw_cpu_ptr(priv->percpu_priv);
-+
-+	if (netif_msg_timer(priv))
-+		netdev_crit(net_dev, "Transmit timeout!\n");
-+
-+	percpu_priv->stats.tx_errors++;
-+}
-+EXPORT_SYMBOL(dpa_timeout);
-+
-+/* net_device */
-+
-+/**
-+ * @param net_dev the device for which statistics are calculated
-+ * @param stats the function fills this structure with the device's statistics
-+ * @return the address of the structure containing the statistics
-+ *
-+ * Calculates the statistics for the given device by adding the statistics
-+ * collected by each CPU.
-+ */
-+void __cold
-+dpa_get_stats64(struct net_device *net_dev,
-+		struct rtnl_link_stats64 *stats)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(net_dev);
-+	u64 *cpustats;
-+	u64 *netstats = (u64 *)stats;
-+	int i, j;
-+	struct dpa_percpu_priv_s	*percpu_priv;
-+	int numstats = sizeof(struct rtnl_link_stats64) / sizeof(u64);
-+
-+	for_each_possible_cpu(i) {
-+		percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
-+
-+		cpustats = (u64 *)&percpu_priv->stats;
-+
-+		for (j = 0; j < numstats; j++)
-+			netstats[j] += cpustats[j];
-+	}
-+}
-+EXPORT_SYMBOL(dpa_get_stats64);
-+
-+int dpa_change_mtu(struct net_device *net_dev, int new_mtu)
-+{
-+	const int max_mtu = dpa_get_max_mtu();
-+
-+	/* Make sure we don't exceed the Ethernet controller's MAXFRM */
-+	if (new_mtu < 68 || new_mtu > max_mtu) {
-+		netdev_err(net_dev, "Invalid L3 mtu %d (must be between %d and %d).\n",
-+				new_mtu, 68, max_mtu);
-+		return -EINVAL;
-+	}
-+	net_dev->mtu = new_mtu;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(dpa_change_mtu);
-+
-+/* .ndo_init callback */
-+int dpa_ndo_init(struct net_device *net_dev)
-+{
-+	/* If fsl_fm_max_frm is set to a higher value than the all-common 1500,
-+	 * we choose conservatively and let the user explicitly set a higher
-+	 * MTU via ifconfig. Otherwise, the user may end up with different MTUs
-+	 * in the same LAN.
-+	 * If on the other hand fsl_fm_max_frm has been chosen below 1500,
-+	 * start with the maximum allowed.
-+	 */
-+	int init_mtu = min(dpa_get_max_mtu(), ETH_DATA_LEN);
-+
-+	pr_debug("Setting initial MTU on net device: %d\n", init_mtu);
-+	net_dev->mtu = init_mtu;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(dpa_ndo_init);
-+
-+int dpa_set_features(struct net_device *dev, netdev_features_t features)
-+{
-+	/* Not much to do here for now */
-+	dev->features = features;
-+	return 0;
-+}
-+EXPORT_SYMBOL(dpa_set_features);
-+
-+netdev_features_t dpa_fix_features(struct net_device *dev,
-+		netdev_features_t features)
-+{
-+	netdev_features_t unsupported_features = 0;
-+
-+	/* In theory we should never be requested to enable features that
-+	 * we didn't set in netdev->features and netdev->hw_features at probe
-+	 * time, but double check just to be on the safe side.
-+	 * We don't support enabling Rx csum through ethtool yet
-+	 */
-+	unsupported_features |= NETIF_F_RXCSUM;
-+
-+	features &= ~unsupported_features;
-+
-+	return features;
-+}
-+EXPORT_SYMBOL(dpa_fix_features);
-+
-+#ifdef CONFIG_FSL_DPAA_TS
-+u64 dpa_get_timestamp_ns(const struct dpa_priv_s *priv, enum port_type rx_tx,
-+			const void *data)
-+{
-+	u64 *ts, ns;
-+
-+	ts = fm_port_get_buffer_time_stamp(priv->mac_dev->port_dev[rx_tx],
-+					   data);
-+
-+	if (!ts || *ts == 0)
-+		return 0;
-+
-+	be64_to_cpus(ts);
-+
-+	/* multiple DPA_PTP_NOMINAL_FREQ_PERIOD_NS for case of non power of 2 */
-+	ns = *ts << DPA_PTP_NOMINAL_FREQ_PERIOD_SHIFT;
-+
-+	return ns;
-+}
-+
-+int dpa_get_ts(const struct dpa_priv_s *priv, enum port_type rx_tx,
-+	struct skb_shared_hwtstamps *shhwtstamps, const void *data)
-+{
-+	u64 ns;
-+
-+	ns = dpa_get_timestamp_ns(priv, rx_tx, data);
-+
-+	if (ns == 0)
-+		return -EINVAL;
-+
-+	memset(shhwtstamps, 0, sizeof(*shhwtstamps));
-+	shhwtstamps->hwtstamp = ns_to_ktime(ns);
-+
-+	return 0;
-+}
-+
-+static void dpa_ts_tx_enable(struct net_device *dev)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(dev);
-+	struct mac_device *mac_dev = priv->mac_dev;
-+
-+	if (mac_dev->fm_rtc_enable)
-+		mac_dev->fm_rtc_enable(get_fm_handle(dev));
-+	if (mac_dev->ptp_enable)
-+		mac_dev->ptp_enable(mac_dev->get_mac_handle(mac_dev));
-+
-+	priv->ts_tx_en = true;
-+}
-+
-+static void dpa_ts_tx_disable(struct net_device *dev)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(dev);
-+
-+#if 0
-+/* the RTC might be needed by the Rx Ts, cannot disable here
-+ * no separate ptp_disable API for Rx/Tx, cannot disable here
-+ */
-+	struct mac_device *mac_dev = priv->mac_dev;
-+
-+	if (mac_dev->fm_rtc_disable)
-+		mac_dev->fm_rtc_disable(get_fm_handle(dev));
-+
-+	if (mac_dev->ptp_disable)
-+		mac_dev->ptp_disable(mac_dev->get_mac_handle(mac_dev));
-+#endif
-+
-+	priv->ts_tx_en = false;
-+}
-+
-+static void dpa_ts_rx_enable(struct net_device *dev)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(dev);
-+	struct mac_device *mac_dev = priv->mac_dev;
-+
-+	if (mac_dev->fm_rtc_enable)
-+		mac_dev->fm_rtc_enable(get_fm_handle(dev));
-+	if (mac_dev->ptp_enable)
-+		mac_dev->ptp_enable(mac_dev->get_mac_handle(mac_dev));
-+
-+	priv->ts_rx_en = true;
-+}
-+
-+static void dpa_ts_rx_disable(struct net_device *dev)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(dev);
-+
-+#if 0
-+/* the RTC might be needed by the Tx Ts, cannot disable here
-+ * no separate ptp_disable API for Rx/Tx, cannot disable here
-+ */
-+	struct mac_device *mac_dev = priv->mac_dev;
-+
-+	if (mac_dev->fm_rtc_disable)
-+		mac_dev->fm_rtc_disable(get_fm_handle(dev));
-+
-+	if (mac_dev->ptp_disable)
-+		mac_dev->ptp_disable(mac_dev->get_mac_handle(mac_dev));
-+#endif
-+
-+	priv->ts_rx_en = false;
-+}
-+
-+static int dpa_ts_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-+{
-+	struct hwtstamp_config config;
-+
-+	if (copy_from_user(&config, rq->ifr_data, sizeof(config)))
-+		return -EFAULT;
-+
-+	switch (config.tx_type) {
-+	case HWTSTAMP_TX_OFF:
-+		dpa_ts_tx_disable(dev);
-+		break;
-+	case HWTSTAMP_TX_ON:
-+		dpa_ts_tx_enable(dev);
-+		break;
-+	default:
-+		return -ERANGE;
-+	}
-+
-+	if (config.rx_filter == HWTSTAMP_FILTER_NONE)
-+		dpa_ts_rx_disable(dev);
-+	else {
-+		dpa_ts_rx_enable(dev);
-+		/* TS is set for all frame types, not only those requested */
-+		config.rx_filter = HWTSTAMP_FILTER_ALL;
-+	}
-+
-+	return copy_to_user(rq->ifr_data, &config, sizeof(config)) ?
-+			-EFAULT : 0;
-+}
-+#endif /* CONFIG_FSL_DPAA_TS */
-+
-+int dpa_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-+{
-+#ifdef CONFIG_FSL_DPAA_1588
-+	struct dpa_priv_s *priv = netdev_priv(dev);
-+#endif
-+	int ret = 0;
-+
-+	/* at least one timestamping feature must be enabled */
-+#ifdef CONFIG_FSL_DPAA_TS
-+	if (!netif_running(dev))
-+#endif
-+		return -EINVAL;
-+
-+#ifdef CONFIG_FSL_DPAA_TS
-+	if (cmd == SIOCSHWTSTAMP)
-+		return dpa_ts_ioctl(dev, rq, cmd);
-+#endif /* CONFIG_FSL_DPAA_TS */
-+
-+#ifdef CONFIG_FSL_DPAA_1588
-+	if ((cmd >= PTP_ENBL_TXTS_IOCTL) && (cmd <= PTP_CLEANUP_TS)) {
-+		if (priv->tsu && priv->tsu->valid)
-+			ret = dpa_ioctl_1588(dev, rq, cmd);
-+		else
-+			ret = -ENODEV;
-+	}
-+#endif
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL(dpa_ioctl);
-+
-+int __cold dpa_remove(struct platform_device *of_dev)
-+{
-+	int			err;
-+	struct device		*dev;
-+	struct net_device	*net_dev;
-+	struct dpa_priv_s	*priv;
-+
-+	dev = &of_dev->dev;
-+	net_dev = dev_get_drvdata(dev);
-+
-+	priv = netdev_priv(net_dev);
-+
-+	dpaa_eth_sysfs_remove(dev);
-+
-+	dev_set_drvdata(dev, NULL);
-+	unregister_netdev(net_dev);
-+
-+	err = dpa_fq_free(dev, &priv->dpa_fq_list);
-+
-+	qman_delete_cgr_safe(&priv->ingress_cgr);
-+	qman_release_cgrid(priv->ingress_cgr.cgrid);
-+	qman_delete_cgr_safe(&priv->cgr_data.cgr);
-+	qman_release_cgrid(priv->cgr_data.cgr.cgrid);
-+
-+	dpa_private_napi_del(net_dev);
-+
-+	dpa_bp_free(priv);
-+
-+	if (priv->buf_layout)
-+		devm_kfree(dev, priv->buf_layout);
-+
-+#ifdef CONFIG_FSL_DPAA_DBG_LOOP
-+	/* remove debugfs entry for this net_device */
-+	dpa_netdev_debugfs_remove(net_dev);
-+#endif /* CONFIG_FSL_DPAA_DBG_LOOP */
-+
-+#ifdef CONFIG_FSL_DPAA_1588
-+	if (priv->tsu && priv->tsu->valid)
-+		dpa_ptp_cleanup(priv);
-+#endif
-+
-+	free_netdev(net_dev);
-+
-+	return err;
-+}
-+EXPORT_SYMBOL(dpa_remove);
-+
-+struct mac_device * __cold __must_check
-+__attribute__((nonnull))
-+dpa_mac_probe(struct platform_device *_of_dev)
-+{
-+	struct device		*dpa_dev, *dev;
-+	struct device_node	*mac_node;
-+	struct platform_device	*of_dev;
-+	struct mac_device	*mac_dev;
-+#ifdef CONFIG_FSL_DPAA_1588
-+	int			 lenp;
-+	const phandle		*phandle_prop;
-+	struct net_device	*net_dev = NULL;
-+	struct dpa_priv_s	*priv = NULL;
-+	struct device_node	*timer_node;
-+#endif
-+	dpa_dev = &_of_dev->dev;
-+
-+	mac_node = of_parse_phandle(_of_dev->dev.of_node, "fsl,fman-mac", 0);
-+	if (unlikely(mac_node == NULL)) {
-+		dev_err(dpa_dev, "Cannot find MAC device device tree node\n");
-+		return ERR_PTR(-EFAULT);
-+	}
-+
-+	of_dev = of_find_device_by_node(mac_node);
-+	if (unlikely(of_dev == NULL)) {
-+		dev_err(dpa_dev, "of_find_device_by_node(%s) failed\n",
-+				mac_node->full_name);
-+		of_node_put(mac_node);
-+		return ERR_PTR(-EINVAL);
-+	}
-+	of_node_put(mac_node);
-+
-+	dev = &of_dev->dev;
-+
-+	mac_dev = dev_get_drvdata(dev);
-+	if (unlikely(mac_dev == NULL)) {
-+		dev_err(dpa_dev, "dev_get_drvdata(%s) failed\n",
-+				dev_name(dev));
-+		return ERR_PTR(-EINVAL);
-+	}
-+
-+#ifdef CONFIG_FSL_DPAA_1588
-+	phandle_prop = of_get_property(mac_node, "ptimer-handle", &lenp);
-+	if (phandle_prop && ((mac_dev->phy_if != PHY_INTERFACE_MODE_SGMII) ||
-+			((mac_dev->phy_if == PHY_INTERFACE_MODE_SGMII) &&
-+			 (mac_dev->speed == SPEED_1000)))) {
-+		timer_node = of_find_node_by_phandle(*phandle_prop);
-+		if (timer_node)
-+			net_dev = dev_get_drvdata(dpa_dev);
-+		if (timer_node && net_dev) {
-+			priv = netdev_priv(net_dev);
-+			if (!dpa_ptp_init(priv))
-+				dev_info(dev, "%s: ptp 1588 is initialized.\n",
-+						mac_node->full_name);
-+		}
-+	}
-+#endif
-+
-+#ifdef CONFIG_PTP_1588_CLOCK_DPAA
-+	if ((mac_dev->phy_if != PHY_INTERFACE_MODE_SGMII) ||
-+	    ((mac_dev->phy_if == PHY_INTERFACE_MODE_SGMII) &&
-+			 (mac_dev->speed == SPEED_1000))) {
-+		ptp_priv.node = of_parse_phandle(mac_node, "ptimer-handle", 0);
-+		if (ptp_priv.node) {
-+			ptp_priv.of_dev = of_find_device_by_node(ptp_priv.node);
-+			if (unlikely(ptp_priv.of_dev == NULL)) {
-+				dev_err(dpa_dev,
-+			"Cannot find device represented by timer_node\n");
-+				of_node_put(ptp_priv.node);
-+				return ERR_PTR(-EINVAL);
-+			}
-+			ptp_priv.mac_dev = mac_dev;
-+		}
-+	}
-+#endif
-+	return mac_dev;
-+}
-+EXPORT_SYMBOL(dpa_mac_probe);
-+
-+int dpa_set_mac_address(struct net_device *net_dev, void *addr)
-+{
-+	const struct dpa_priv_s	*priv;
-+	int			 _errno;
-+	struct mac_device	*mac_dev;
-+
-+	priv = netdev_priv(net_dev);
-+
-+	_errno = eth_mac_addr(net_dev, addr);
-+	if (_errno < 0) {
-+		if (netif_msg_drv(priv))
-+			netdev_err(net_dev,
-+				       "eth_mac_addr() = %d\n",
-+				       _errno);
-+		return _errno;
-+	}
-+
-+	mac_dev = priv->mac_dev;
-+
-+	_errno = mac_dev->change_addr(mac_dev->get_mac_handle(mac_dev),
-+			net_dev->dev_addr);
-+	if (_errno < 0) {
-+		if (netif_msg_drv(priv))
-+			netdev_err(net_dev,
-+				       "mac_dev->change_addr() = %d\n",
-+				       _errno);
-+		return _errno;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(dpa_set_mac_address);
-+
-+void dpa_set_rx_mode(struct net_device *net_dev)
-+{
-+	int			 _errno;
-+	const struct dpa_priv_s	*priv;
-+
-+	priv = netdev_priv(net_dev);
-+
-+	if (!!(net_dev->flags & IFF_PROMISC) != priv->mac_dev->promisc) {
-+		priv->mac_dev->promisc = !priv->mac_dev->promisc;
-+		_errno = priv->mac_dev->set_promisc(
-+				priv->mac_dev->get_mac_handle(priv->mac_dev),
-+				priv->mac_dev->promisc);
-+		if (unlikely(_errno < 0) && netif_msg_drv(priv))
-+			netdev_err(net_dev,
-+					   "mac_dev->set_promisc() = %d\n",
-+					   _errno);
-+	}
-+
-+	_errno = priv->mac_dev->set_multi(net_dev, priv->mac_dev);
-+	if (unlikely(_errno < 0) && netif_msg_drv(priv))
-+		netdev_err(net_dev, "mac_dev->set_multi() = %d\n", _errno);
-+}
-+EXPORT_SYMBOL(dpa_set_rx_mode);
-+
-+void dpa_set_buffers_layout(struct mac_device *mac_dev,
-+		struct dpa_buffer_layout_s *layout)
-+{
-+	struct fm_port_params params;
-+
-+	/* Rx */
-+	layout[RX].priv_data_size = (uint16_t)DPA_RX_PRIV_DATA_SIZE;
-+	layout[RX].parse_results = true;
-+	layout[RX].hash_results = true;
-+#ifdef CONFIG_FSL_DPAA_TS
-+	layout[RX].time_stamp = true;
-+#endif
-+	fm_port_get_buff_layout_ext_params(mac_dev->port_dev[RX], &params);
-+	layout[RX].manip_extra_space = params.manip_extra_space;
-+	/* a value of zero for data alignment means "don't care", so align to
-+	 * a non-zero value to prevent FMD from using its own default
-+	 */
-+	layout[RX].data_align = params.data_align ? : DPA_FD_DATA_ALIGNMENT;
-+
-+	/* Tx */
-+	layout[TX].priv_data_size = DPA_TX_PRIV_DATA_SIZE;
-+	layout[TX].parse_results = true;
-+	layout[TX].hash_results = true;
-+#ifdef CONFIG_FSL_DPAA_TS
-+	layout[TX].time_stamp = true;
-+#endif
-+	fm_port_get_buff_layout_ext_params(mac_dev->port_dev[TX], &params);
-+	layout[TX].manip_extra_space = params.manip_extra_space;
-+	layout[TX].data_align = params.data_align ? : DPA_FD_DATA_ALIGNMENT;
-+}
-+EXPORT_SYMBOL(dpa_set_buffers_layout);
-+
-+int __attribute__((nonnull))
-+dpa_bp_alloc(struct dpa_bp *dpa_bp)
-+{
-+	int err;
-+	struct bman_pool_params	 bp_params;
-+	struct platform_device *pdev;
-+
-+	if (dpa_bp->size == 0 || dpa_bp->config_count == 0) {
-+		pr_err("Buffer pool is not properly initialized! Missing size or initial number of buffers");
-+		return -EINVAL;
-+	}
-+
-+	memset(&bp_params, 0, sizeof(struct bman_pool_params));
-+#ifdef CONFIG_FMAN_PFC
-+	bp_params.flags = BMAN_POOL_FLAG_THRESH;
-+	bp_params.thresholds[0] = bp_params.thresholds[2] =
-+			CONFIG_FSL_DPAA_ETH_REFILL_THRESHOLD;
-+	bp_params.thresholds[1] = bp_params.thresholds[3] =
-+			CONFIG_FSL_DPAA_ETH_MAX_BUF_COUNT;
-+#endif
-+
-+	/* If the pool is already specified, we only create one per bpid */
-+	if (dpa_bpid2pool_use(dpa_bp->bpid))
-+		return 0;
-+
-+	if (dpa_bp->bpid == 0)
-+		bp_params.flags |= BMAN_POOL_FLAG_DYNAMIC_BPID;
-+	else
-+		bp_params.bpid = dpa_bp->bpid;
-+
-+	dpa_bp->pool = bman_new_pool(&bp_params);
-+	if (unlikely(dpa_bp->pool == NULL)) {
-+		pr_err("bman_new_pool() failed\n");
-+		return -ENODEV;
-+	}
-+
-+	dpa_bp->bpid = (uint8_t)bman_get_params(dpa_bp->pool)->bpid;
-+
-+	pdev = platform_device_register_simple("dpaa_eth_bpool",
-+			dpa_bp->bpid, NULL, 0);
-+	if (IS_ERR(pdev)) {
-+		pr_err("platform_device_register_simple() failed\n");
-+		err = PTR_ERR(pdev);
-+		goto pdev_register_failed;
-+	}
-+	{
-+		struct dma_map_ops *ops = get_dma_ops(&pdev->dev);
-+		ops->dma_supported = NULL;
-+	}
-+	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40));
-+	if (err) {
-+		pr_err("dma_coerce_mask_and_coherent() failed\n");
-+		goto pdev_mask_failed;
-+	}
-+#ifdef CONFIG_FMAN_ARM
-+	/* force coherency */
-+	pdev->dev.archdata.dma_coherent = true;
-+	arch_setup_dma_ops(&pdev->dev, 0, 0, NULL, true);
-+#endif
-+
-+	dpa_bp->dev = &pdev->dev;
-+
-+	if (dpa_bp->seed_cb) {
-+		err = dpa_bp->seed_cb(dpa_bp);
-+		if (err)
-+			goto pool_seed_failed;
-+	}
-+
-+	dpa_bpid2pool_map(dpa_bp->bpid, dpa_bp);
-+
-+	return 0;
-+
-+pool_seed_failed:
-+pdev_mask_failed:
-+	platform_device_unregister(pdev);
-+pdev_register_failed:
-+	bman_free_pool(dpa_bp->pool);
-+
-+	return err;
-+}
-+EXPORT_SYMBOL(dpa_bp_alloc);
-+
-+void dpa_bp_drain(struct dpa_bp *bp)
-+{
-+	int ret, num = 8;
-+
-+	do {
-+		struct bm_buffer bmb[8];
-+		int i;
-+
-+		ret = bman_acquire(bp->pool, bmb, num, 0);
-+		if (ret < 0) {
-+			if (num == 8) {
-+				/* we have less than 8 buffers left;
-+				 * drain them one by one
-+				 */
-+				num = 1;
-+				ret = 1;
-+				continue;
-+			} else {
-+				/* Pool is fully drained */
-+				break;
-+			}
-+		}
-+
-+		for (i = 0; i < num; i++) {
-+			dma_addr_t addr = bm_buf_addr(&bmb[i]);
-+
-+			dma_unmap_single(bp->dev, addr, bp->size,
-+					DMA_BIDIRECTIONAL);
-+
-+			bp->free_buf_cb(phys_to_virt(addr));
-+		}
-+	} while (ret > 0);
-+}
-+EXPORT_SYMBOL(dpa_bp_drain);
-+
-+static void __cold __attribute__((nonnull))
-+_dpa_bp_free(struct dpa_bp *dpa_bp)
-+{
-+	struct dpa_bp *bp = dpa_bpid2pool(dpa_bp->bpid);
-+
-+	/* the mapping between bpid and dpa_bp is done very late in the
-+	 * allocation procedure; if something failed before the mapping, the bp
-+	 * was not configured, therefore we don't need the below instructions
-+	 */
-+	if (!bp)
-+		return;
-+
-+	if (!atomic_dec_and_test(&bp->refs))
-+		return;
-+
-+	if (bp->free_buf_cb)
-+		dpa_bp_drain(bp);
-+
-+	dpa_bp_array[bp->bpid] = NULL;
-+	bman_free_pool(bp->pool);
-+
-+	if (bp->dev)
-+		platform_device_unregister(to_platform_device(bp->dev));
-+}
-+
-+void __cold __attribute__((nonnull))
-+dpa_bp_free(struct dpa_priv_s *priv)
-+{
-+	int i;
-+
-+	if (priv->dpa_bp)
-+		for (i = 0; i < priv->bp_count; i++)
-+			_dpa_bp_free(&priv->dpa_bp[i]);
-+}
-+EXPORT_SYMBOL(dpa_bp_free);
-+
-+struct dpa_bp *dpa_bpid2pool(int bpid)
-+{
-+	return dpa_bp_array[bpid];
-+}
-+EXPORT_SYMBOL(dpa_bpid2pool);
-+
-+void dpa_bpid2pool_map(int bpid, struct dpa_bp *dpa_bp)
-+{
-+	dpa_bp_array[bpid] = dpa_bp;
-+	atomic_set(&dpa_bp->refs, 1);
-+}
-+
-+bool dpa_bpid2pool_use(int bpid)
-+{
-+	if (dpa_bpid2pool(bpid)) {
-+		atomic_inc(&dpa_bp_array[bpid]->refs);
-+		return true;
-+	}
-+
-+	return false;
-+}
-+
-+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
-+u16 dpa_select_queue(struct net_device *net_dev, struct sk_buff *skb,
-+		     struct net_device *sb_dev,
-+		     select_queue_fallback_t fallback)
-+{
-+	return dpa_get_queue_mapping(skb);
-+}
-+EXPORT_SYMBOL(dpa_select_queue);
-+#endif
-+
-+struct dpa_fq *dpa_fq_alloc(struct device *dev,
-+			    u32 fq_start,
-+			    u32 fq_count,
-+			    struct list_head *list,
-+			    enum dpa_fq_type fq_type)
-+{
-+	int i;
-+	struct dpa_fq *dpa_fq;
-+
-+	dpa_fq = devm_kzalloc(dev, sizeof(*dpa_fq) * fq_count, GFP_KERNEL);
-+	if (dpa_fq == NULL)
-+		return NULL;
-+
-+	for (i = 0; i < fq_count; i++) {
-+		dpa_fq[i].fq_type = fq_type;
-+		if (fq_type == FQ_TYPE_RX_PCD_HI_PRIO)
-+			dpa_fq[i].fqid = fq_start ?
-+					 DPAA_ETH_FQ_DELTA + fq_start + i : 0;
-+		else
-+			dpa_fq[i].fqid = fq_start ? fq_start + i : 0;
-+
-+		list_add_tail(&dpa_fq[i].list, list);
-+	}
-+
-+#ifdef CONFIG_FMAN_PFC
-+	if (fq_type == FQ_TYPE_TX)
-+		for (i = 0; i < fq_count; i++)
-+			dpa_fq[i].wq = i / dpa_num_cpus;
-+	else
-+#endif
-+		for (i = 0; i < fq_count; i++)
-+			_dpa_assign_wq(dpa_fq + i);
-+
-+	return dpa_fq;
-+}
-+EXPORT_SYMBOL(dpa_fq_alloc);
-+
-+/* Probing of FQs for MACful ports */
-+int dpa_fq_probe_mac(struct device *dev, struct list_head *list,
-+			    struct fm_port_fqs *port_fqs,
-+			    bool alloc_tx_conf_fqs,
-+			    enum port_type ptype)
-+{
-+	struct fqid_cell *fqids = NULL;
-+	const void *fqids_off = NULL;
-+	struct dpa_fq *dpa_fq = NULL;
-+	struct device_node *np = dev->of_node;
-+	int num_ranges;
-+	int i, lenp;
-+
-+	if (ptype == TX && alloc_tx_conf_fqs) {
-+		if (!dpa_fq_alloc(dev, tx_confirm_fqids->start,
-+				  tx_confirm_fqids->count, list,
-+				  FQ_TYPE_TX_CONF_MQ))
-+			goto fq_alloc_failed;
-+	}
-+
-+	fqids_off = of_get_property(np, fsl_qman_frame_queues[ptype], &lenp);
-+	if (fqids_off == NULL) {
-+		/* No dts definition, so use the defaults. */
-+		fqids = default_fqids[ptype];
-+		num_ranges = 3;
-+	} else {
-+		num_ranges = lenp / sizeof(*fqids);
-+
-+		fqids = devm_kzalloc(dev, sizeof(*fqids) * num_ranges,
-+				GFP_KERNEL);
-+		if (fqids == NULL)
-+			goto fqids_alloc_failed;
-+
-+		/* convert to CPU endianess */
-+		for (i = 0; i < num_ranges; i++) {
-+			fqids[i].start = be32_to_cpup(fqids_off +
-+					i * sizeof(*fqids));
-+			fqids[i].count = be32_to_cpup(fqids_off +
-+					i * sizeof(*fqids) + sizeof(__be32));
-+		}
-+	}
-+
-+	for (i = 0; i < num_ranges; i++) {
-+		switch (i) {
-+		case 0:
-+			/* The first queue is the error queue */
-+			if (fqids[i].count != 1)
-+				goto invalid_error_queue;
-+
-+			dpa_fq = dpa_fq_alloc(dev, fqids[i].start,
-+					      fqids[i].count, list,
-+					      ptype == RX ?
-+						FQ_TYPE_RX_ERROR :
-+						FQ_TYPE_TX_ERROR);
-+			if (dpa_fq == NULL)
-+				goto fq_alloc_failed;
-+
-+			if (ptype == RX)
-+				port_fqs->rx_errq = &dpa_fq[0];
-+			else
-+				port_fqs->tx_errq = &dpa_fq[0];
-+			break;
-+		case 1:
-+			/* the second queue is the default queue */
-+			if (fqids[i].count != 1)
-+				goto invalid_default_queue;
-+
-+			dpa_fq = dpa_fq_alloc(dev, fqids[i].start,
-+					      fqids[i].count, list,
-+					      ptype == RX ?
-+						FQ_TYPE_RX_DEFAULT :
-+						FQ_TYPE_TX_CONFIRM);
-+			if (dpa_fq == NULL)
-+				goto fq_alloc_failed;
-+
-+			if (ptype == RX)
-+				port_fqs->rx_defq = &dpa_fq[0];
-+			else
-+				port_fqs->tx_defq = &dpa_fq[0];
-+			break;
-+		default:
-+			/* all subsequent queues are either RX* PCD or Tx */
-+			if (ptype == RX) {
-+				if (!dpa_fq_alloc(dev, fqids[i].start,
-+						  fqids[i].count, list,
-+						  FQ_TYPE_RX_PCD) ||
-+				    !dpa_fq_alloc(dev, fqids[i].start,
-+						  fqids[i].count, list,
-+						  FQ_TYPE_RX_PCD_HI_PRIO))
-+					goto fq_alloc_failed;
-+			} else {
-+				if (!dpa_fq_alloc(dev, fqids[i].start,
-+						  fqids[i].count, list,
-+						  FQ_TYPE_TX))
-+					goto fq_alloc_failed;
-+			}
-+			break;
-+		}
-+	}
-+
-+	return 0;
-+
-+fq_alloc_failed:
-+fqids_alloc_failed:
-+	dev_err(dev, "Cannot allocate memory for frame queues\n");
-+	return -ENOMEM;
-+
-+invalid_default_queue:
-+invalid_error_queue:
-+	dev_err(dev, "Too many default or error queues\n");
-+	return -EINVAL;
-+}
-+EXPORT_SYMBOL(dpa_fq_probe_mac);
-+
-+static u32 rx_pool_channel;
-+static DEFINE_SPINLOCK(rx_pool_channel_init);
-+
-+int dpa_get_channel(void)
-+{
-+	spin_lock(&rx_pool_channel_init);
-+	if (!rx_pool_channel) {
-+		u32 pool;
-+		int ret = qman_alloc_pool(&pool);
-+		if (!ret)
-+			rx_pool_channel = pool;
-+	}
-+	spin_unlock(&rx_pool_channel_init);
-+	if (!rx_pool_channel)
-+		return -ENOMEM;
-+	return rx_pool_channel;
-+}
-+EXPORT_SYMBOL(dpa_get_channel);
-+
-+void dpa_release_channel(void)
-+{
-+	qman_release_pool(rx_pool_channel);
-+}
-+EXPORT_SYMBOL(dpa_release_channel);
-+
-+void dpaa_eth_add_channel(u16 channel)
-+{
-+	const cpumask_t *cpus = qman_affine_cpus();
-+	u32 pool = QM_SDQCR_CHANNELS_POOL_CONV(channel);
-+	int cpu;
-+	struct qman_portal *portal;
-+
-+	for_each_cpu(cpu, cpus) {
-+		portal = (struct qman_portal *)qman_get_affine_portal(cpu);
-+		qman_p_static_dequeue_add(portal, pool);
-+	}
-+}
-+EXPORT_SYMBOL(dpaa_eth_add_channel);
-+
-+/**
-+ * Congestion group state change notification callback.
-+ * Stops the device's egress queues while they are congested and
-+ * wakes them upon exiting congested state.
-+ * Also updates some CGR-related stats.
-+ */
-+static void dpaa_eth_cgscn(struct qman_portal *qm, struct qman_cgr *cgr,
-+
-+	int congested)
-+{
-+	struct dpa_priv_s *priv = (struct dpa_priv_s *)container_of(cgr,
-+		struct dpa_priv_s, cgr_data.cgr);
-+
-+	if (congested) {
-+		priv->cgr_data.congestion_start_jiffies = jiffies;
-+		netif_tx_stop_all_queues(priv->net_dev);
-+		priv->cgr_data.cgr_congested_count++;
-+	} else {
-+		priv->cgr_data.congested_jiffies +=
-+			(jiffies - priv->cgr_data.congestion_start_jiffies);
-+		netif_tx_wake_all_queues(priv->net_dev);
-+	}
-+}
-+
-+int dpaa_eth_cgr_init(struct dpa_priv_s *priv)
-+{
-+	struct qm_mcc_initcgr initcgr;
-+	u32 cs_th;
-+	int err;
-+
-+	err = qman_alloc_cgrid(&priv->cgr_data.cgr.cgrid);
-+	if (err < 0) {
-+		pr_err("Error %d allocating CGR ID\n", err);
-+		goto out_error;
-+	}
-+	priv->cgr_data.cgr.cb = dpaa_eth_cgscn;
-+
-+	/* Enable Congestion State Change Notifications and CS taildrop */
-+	initcgr.we_mask = QM_CGR_WE_CSCN_EN | QM_CGR_WE_CS_THRES;
-+	initcgr.cgr.cscn_en = QM_CGR_EN;
-+
-+	/* Set different thresholds based on the MAC speed.
-+	 * TODO: this may turn suboptimal if the MAC is reconfigured at a speed
-+	 * lower than its max, e.g. if a dTSEC later negotiates a 100Mbps link.
-+	 * In such cases, we ought to reconfigure the threshold, too.
-+	 */
-+	if (priv->mac_dev->if_support & SUPPORTED_10000baseT_Full)
-+		cs_th = CONFIG_FSL_DPAA_CS_THRESHOLD_10G;
-+	else
-+		cs_th = CONFIG_FSL_DPAA_CS_THRESHOLD_1G;
-+	qm_cgr_cs_thres_set64(&initcgr.cgr.cs_thres, cs_th, 1);
-+
-+	initcgr.we_mask |= QM_CGR_WE_CSTD_EN;
-+	initcgr.cgr.cstd_en = QM_CGR_EN;
-+
-+	err = qman_create_cgr(&priv->cgr_data.cgr, QMAN_CGR_FLAG_USE_INIT,
-+		&initcgr);
-+	if (err < 0) {
-+		pr_err("Error %d creating CGR with ID %d\n", err,
-+			priv->cgr_data.cgr.cgrid);
-+		qman_release_cgrid(priv->cgr_data.cgr.cgrid);
-+		goto out_error;
-+	}
-+	pr_debug("Created CGR %d for netdev with hwaddr %pM on QMan channel %d\n",
-+		 priv->cgr_data.cgr.cgrid, priv->mac_dev->addr,
-+		 priv->cgr_data.cgr.chan);
-+
-+out_error:
-+	return err;
-+}
-+EXPORT_SYMBOL(dpaa_eth_cgr_init);
-+
-+static inline void dpa_setup_ingress(const struct dpa_priv_s *priv,
-+				     struct dpa_fq *fq,
-+				     const struct qman_fq *template)
-+{
-+	fq->fq_base = *template;
-+	fq->net_dev = priv->net_dev;
-+
-+	fq->flags = QMAN_FQ_FLAG_NO_ENQUEUE;
-+	fq->channel = priv->channel;
-+}
-+
-+static inline void dpa_setup_egress(const struct dpa_priv_s *priv,
-+				    struct dpa_fq *fq,
-+				    struct fm_port *port,
-+				    const struct qman_fq *template)
-+{
-+	fq->fq_base = *template;
-+	fq->net_dev = priv->net_dev;
-+
-+	if (port) {
-+		fq->flags = QMAN_FQ_FLAG_TO_DCPORTAL;
-+		fq->channel = (uint16_t)fm_get_tx_port_channel(port);
-+	} else {
-+		fq->flags = QMAN_FQ_FLAG_NO_MODIFY;
-+	}
-+}
-+
-+void dpa_fq_setup(struct dpa_priv_s *priv, const struct dpa_fq_cbs_t *fq_cbs,
-+		struct fm_port *tx_port)
-+{
-+	struct dpa_fq *fq;
-+	uint16_t portals[NR_CPUS];
-+	int cpu, portal_cnt = 0, num_portals = 0;
-+	uint32_t pcd_fqid, pcd_fqid_hi_prio;
-+	const cpumask_t *affine_cpus = qman_affine_cpus();
-+	int egress_cnt = 0, conf_cnt = 0;
-+
-+	/* Prepare for PCD FQs init */
-+	for_each_cpu(cpu, affine_cpus)
-+		portals[num_portals++] = qman_affine_channel(cpu);
-+	if (num_portals == 0)
-+		dev_err(priv->net_dev->dev.parent,
-+			"No Qman software (affine) channels found");
-+
-+	pcd_fqid = (priv->mac_dev) ?
-+		DPAA_ETH_PCD_FQ_BASE(priv->mac_dev->res->start) : 0;
-+	pcd_fqid_hi_prio = (priv->mac_dev) ?
-+		DPAA_ETH_PCD_FQ_HI_PRIO_BASE(priv->mac_dev->res->start) : 0;
-+
-+	/* Initialize each FQ in the list */
-+	list_for_each_entry(fq, &priv->dpa_fq_list, list) {
-+		switch (fq->fq_type) {
-+		case FQ_TYPE_RX_DEFAULT:
-+			BUG_ON(!priv->mac_dev);
-+			dpa_setup_ingress(priv, fq, &fq_cbs->rx_defq);
-+			break;
-+		case FQ_TYPE_RX_ERROR:
-+			BUG_ON(!priv->mac_dev);
-+			dpa_setup_ingress(priv, fq, &fq_cbs->rx_errq);
-+			break;
-+		case FQ_TYPE_RX_PCD:
-+			/* For MACless we can't have dynamic Rx queues */
-+			BUG_ON(!priv->mac_dev && !fq->fqid);
-+			dpa_setup_ingress(priv, fq, &fq_cbs->rx_defq);
-+			if (!fq->fqid)
-+				fq->fqid = pcd_fqid++;
-+			fq->channel = portals[portal_cnt];
-+			portal_cnt = (portal_cnt + 1) % num_portals;
-+			break;
-+		case FQ_TYPE_RX_PCD_HI_PRIO:
-+			/* For MACless we can't have dynamic Hi Pri Rx queues */
-+			BUG_ON(!priv->mac_dev && !fq->fqid);
-+			dpa_setup_ingress(priv, fq, &fq_cbs->rx_defq);
-+			if (!fq->fqid)
-+				fq->fqid = pcd_fqid_hi_prio++;
-+			fq->channel = portals[portal_cnt];
-+			portal_cnt = (portal_cnt + 1) % num_portals;
-+			break;
-+		case FQ_TYPE_TX:
-+			dpa_setup_egress(priv, fq, tx_port,
-+					 &fq_cbs->egress_ern);
-+			/* If we have more Tx queues than the number of cores,
-+			 * just ignore the extra ones.
-+			 */
-+			if (egress_cnt < DPAA_ETH_TX_QUEUES)
-+				priv->egress_fqs[egress_cnt++] = &fq->fq_base;
-+			break;
-+		case FQ_TYPE_TX_CONFIRM:
-+			BUG_ON(!priv->mac_dev);
-+			dpa_setup_ingress(priv, fq, &fq_cbs->tx_defq);
-+			break;
-+		case FQ_TYPE_TX_CONF_MQ:
-+			BUG_ON(!priv->mac_dev);
-+			dpa_setup_ingress(priv, fq, &fq_cbs->tx_defq);
-+			priv->conf_fqs[conf_cnt++] = &fq->fq_base;
-+			break;
-+		case FQ_TYPE_TX_ERROR:
-+			BUG_ON(!priv->mac_dev);
-+			dpa_setup_ingress(priv, fq, &fq_cbs->tx_errq);
-+			break;
-+		default:
-+			dev_warn(priv->net_dev->dev.parent,
-+				 "Unknown FQ type detected!\n");
-+			break;
-+		}
-+	}
-+
-+	/* The number of Tx queues may be smaller than the number of cores, if
-+	 * the Tx queue range is specified in the device tree instead of being
-+	 * dynamically allocated.
-+	 * Make sure all CPUs receive a corresponding Tx queue.
-+	 */
-+	while (egress_cnt < DPAA_ETH_TX_QUEUES) {
-+		list_for_each_entry(fq, &priv->dpa_fq_list, list) {
-+			if (fq->fq_type != FQ_TYPE_TX)
-+				continue;
-+			priv->egress_fqs[egress_cnt++] = &fq->fq_base;
-+			if (egress_cnt == DPAA_ETH_TX_QUEUES)
-+				break;
-+		}
-+	}
-+}
-+EXPORT_SYMBOL(dpa_fq_setup);
-+
-+int dpa_fq_init(struct dpa_fq *dpa_fq, bool td_enable)
-+{
-+	int			 _errno;
-+	const struct dpa_priv_s	*priv;
-+	struct device		*dev;
-+	struct qman_fq		*fq;
-+	struct qm_mcc_initfq	 initfq;
-+	struct qman_fq		*confq;
-+	int			queue_id;
-+
-+	priv = netdev_priv(dpa_fq->net_dev);
-+	dev = dpa_fq->net_dev->dev.parent;
-+
-+	if (dpa_fq->fqid == 0)
-+		dpa_fq->flags |= QMAN_FQ_FLAG_DYNAMIC_FQID;
-+
-+	dpa_fq->init = !(dpa_fq->flags & QMAN_FQ_FLAG_NO_MODIFY);
-+
-+	_errno = qman_create_fq(dpa_fq->fqid, dpa_fq->flags, &dpa_fq->fq_base);
-+	if (_errno) {
-+		dev_err(dev, "qman_create_fq() failed\n");
-+		return _errno;
-+	}
-+	fq = &dpa_fq->fq_base;
-+
-+	if (dpa_fq->init) {
-+		memset(&initfq, 0, sizeof(initfq));
-+
-+		initfq.we_mask = QM_INITFQ_WE_FQCTRL;
-+		/* FIXME: why would we want to keep an empty FQ in cache? */
-+		initfq.fqd.fq_ctrl = QM_FQCTRL_PREFERINCACHE;
-+
-+		/* Try to reduce the number of portal interrupts for
-+		 * Tx Confirmation FQs.
-+		 */
-+		if (dpa_fq->fq_type == FQ_TYPE_TX_CONFIRM)
-+			initfq.fqd.fq_ctrl |= QM_FQCTRL_HOLDACTIVE;
-+
-+		/* FQ placement */
-+		initfq.we_mask |= QM_INITFQ_WE_DESTWQ;
-+
-+		initfq.fqd.dest.channel	= dpa_fq->channel;
-+		initfq.fqd.dest.wq = dpa_fq->wq;
-+
-+		/* Put all egress queues in a congestion group of their own.
-+		 * Sensu stricto, the Tx confirmation queues are Rx FQs,
-+		 * rather than Tx - but they nonetheless account for the
-+		 * memory footprint on behalf of egress traffic. We therefore
-+		 * place them in the netdev's CGR, along with the Tx FQs.
-+		 */
-+		if (dpa_fq->fq_type == FQ_TYPE_TX ||
-+				dpa_fq->fq_type == FQ_TYPE_TX_CONFIRM ||
-+				dpa_fq->fq_type == FQ_TYPE_TX_CONF_MQ) {
-+			initfq.we_mask |= QM_INITFQ_WE_CGID;
-+			initfq.fqd.fq_ctrl |= QM_FQCTRL_CGE;
-+			initfq.fqd.cgid = (uint8_t)priv->cgr_data.cgr.cgrid;
-+			/* Set a fixed overhead accounting, in an attempt to
-+			 * reduce the impact of fixed-size skb shells and the
-+			 * driver's needed headroom on system memory. This is
-+			 * especially the case when the egress traffic is
-+			 * composed of small datagrams.
-+			 * Unfortunately, QMan's OAL value is capped to an
-+			 * insufficient value, but even that is better than
-+			 * no overhead accounting at all.
-+			 */
-+			initfq.we_mask |= QM_INITFQ_WE_OAC;
-+			initfq.fqd.oac_init.oac = QM_OAC_CG;
-+			initfq.fqd.oac_init.oal =
-+				(signed char)(min(sizeof(struct sk_buff) +
-+				priv->tx_headroom, (size_t)FSL_QMAN_MAX_OAL));
-+		}
-+
-+		if (td_enable) {
-+			initfq.we_mask |= QM_INITFQ_WE_TDTHRESH;
-+			qm_fqd_taildrop_set(&initfq.fqd.td,
-+					DPA_FQ_TD, 1);
-+			initfq.fqd.fq_ctrl = QM_FQCTRL_TDE;
-+		}
-+
-+		/* Configure the Tx confirmation queue, now that we know
-+		 * which Tx queue it pairs with.
-+		 */
-+		if (dpa_fq->fq_type == FQ_TYPE_TX) {
-+			queue_id = _dpa_tx_fq_to_id(priv, &dpa_fq->fq_base);
-+			if (queue_id >= 0) {
-+				confq = priv->conf_fqs[queue_id];
-+				if (confq) {
-+					initfq.we_mask |= QM_INITFQ_WE_CONTEXTA;
-+			/* ContextA: OVOM=1 (use contextA2 bits instead of ICAD)
-+			 *	     A2V=1 (contextA A2 field is valid)
-+			 *           A0V=1 (contextA A0 field is valid)
-+			 *	     B0V=1 (contextB field is valid)
-+			 * ContextA A2: EBD=1 (deallocate buffers inside FMan)
-+			 * ContextB B0(ASPID): 0 (absolute Virtual Storage ID)
-+			 */
-+					initfq.fqd.context_a.hi = 0x1e000000;
-+					initfq.fqd.context_a.lo = 0x80000000;
-+				}
-+			}
-+		}
-+
-+		/* Put all *private* ingress queues in our "ingress CGR". */
-+		if (priv->use_ingress_cgr &&
-+				(dpa_fq->fq_type == FQ_TYPE_RX_DEFAULT ||
-+				 dpa_fq->fq_type == FQ_TYPE_RX_ERROR ||
-+				 dpa_fq->fq_type == FQ_TYPE_RX_PCD ||
-+				 dpa_fq->fq_type == FQ_TYPE_RX_PCD_HI_PRIO)) {
-+			initfq.we_mask |= QM_INITFQ_WE_CGID;
-+			initfq.fqd.fq_ctrl |= QM_FQCTRL_CGE;
-+			initfq.fqd.cgid = (uint8_t)priv->ingress_cgr.cgrid;
-+			/* Set a fixed overhead accounting, just like for the
-+			 * egress CGR.
-+			 */
-+			initfq.we_mask |= QM_INITFQ_WE_OAC;
-+			initfq.fqd.oac_init.oac = QM_OAC_CG;
-+			initfq.fqd.oac_init.oal =
-+				(signed char)(min(sizeof(struct sk_buff) +
-+				priv->tx_headroom, (size_t)FSL_QMAN_MAX_OAL));
-+		}
-+
-+		/* Initialization common to all ingress queues */
-+		if (dpa_fq->flags & QMAN_FQ_FLAG_NO_ENQUEUE) {
-+			initfq.we_mask |= QM_INITFQ_WE_CONTEXTA;
-+			initfq.fqd.fq_ctrl |=
-+				QM_FQCTRL_CTXASTASHING | QM_FQCTRL_AVOIDBLOCK;
-+			initfq.fqd.context_a.stashing.exclusive =
-+				QM_STASHING_EXCL_DATA | QM_STASHING_EXCL_CTX |
-+				QM_STASHING_EXCL_ANNOTATION;
-+			initfq.fqd.context_a.stashing.data_cl = 2;
-+			initfq.fqd.context_a.stashing.annotation_cl = 1;
-+			initfq.fqd.context_a.stashing.context_cl =
-+				DIV_ROUND_UP(sizeof(struct qman_fq), 64);
-+		}
-+
-+		_errno = qman_init_fq(fq, QMAN_INITFQ_FLAG_SCHED, &initfq);
-+		if (_errno < 0) {
-+			if (DPA_RX_PCD_HI_PRIO_FQ_INIT_FAIL(dpa_fq, _errno)) {
-+				dpa_fq->init = 0;
-+			} else {
-+				dev_err(dev, "qman_init_fq(%u) = %d\n",
-+					qman_fq_fqid(fq), _errno);
-+				qman_destroy_fq(fq, 0);
-+			}
-+			return _errno;
-+		}
-+	}
-+
-+	dpa_fq->fqid = qman_fq_fqid(fq);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(dpa_fq_init);
-+
-+int __cold __attribute__((nonnull))
-+_dpa_fq_free(struct device *dev, struct qman_fq *fq)
-+{
-+	int			 _errno, __errno;
-+	struct dpa_fq		*dpa_fq;
-+	const struct dpa_priv_s	*priv;
-+
-+	_errno = 0;
-+
-+	dpa_fq = container_of(fq, struct dpa_fq, fq_base);
-+	priv = netdev_priv(dpa_fq->net_dev);
-+
-+	if (dpa_fq->init) {
-+		_errno = qman_retire_fq(fq, NULL);
-+		if (unlikely(_errno < 0) && netif_msg_drv(priv))
-+			dev_err(dev, "qman_retire_fq(%u) = %d\n",
-+					qman_fq_fqid(fq), _errno);
-+
-+		__errno = qman_oos_fq(fq);
-+		if (unlikely(__errno < 0) && netif_msg_drv(priv)) {
-+			dev_err(dev, "qman_oos_fq(%u) = %d\n",
-+					qman_fq_fqid(fq), __errno);
-+			if (_errno >= 0)
-+				_errno = __errno;
-+		}
-+	}
-+
-+	qman_destroy_fq(fq, 0);
-+	list_del(&dpa_fq->list);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(_dpa_fq_free);
-+
-+int __cold __attribute__((nonnull))
-+dpa_fq_free(struct device *dev, struct list_head *list)
-+{
-+	int		 _errno, __errno;
-+	struct dpa_fq	*dpa_fq, *tmp;
-+
-+	_errno = 0;
-+	list_for_each_entry_safe(dpa_fq, tmp, list, list) {
-+		__errno = _dpa_fq_free(dev, (struct qman_fq *)dpa_fq);
-+		if (unlikely(__errno < 0) && _errno >= 0)
-+			_errno = __errno;
-+	}
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(dpa_fq_free);
-+
-+int dpa_fqs_init(struct device *dev, struct list_head *list, bool td_enable)
-+{
-+	int  _errno, __errno;
-+	struct dpa_fq	*dpa_fq, *tmp;
-+	static bool print_msg __read_mostly;
-+
-+	_errno = 0;
-+	print_msg = true;
-+	list_for_each_entry_safe(dpa_fq, tmp, list, list) {
-+		__errno = dpa_fq_init(dpa_fq, td_enable);
-+		if (unlikely(__errno < 0) && _errno >= 0) {
-+			if (DPA_RX_PCD_HI_PRIO_FQ_INIT_FAIL(dpa_fq, __errno)) {
-+				if (print_msg) {
-+					dev_warn(dev,
-+						 "Skip RX PCD High Priority FQs initialization\n");
-+					print_msg = false;
-+				}
-+				if (_dpa_fq_free(dev, (struct qman_fq *)dpa_fq))
-+					dev_warn(dev,
-+						 "Error freeing frame queues\n");
-+			} else {
-+				_errno = __errno;
-+				break;
-+			}
-+		}
-+	}
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(dpa_fqs_init);
-+static void
-+dpaa_eth_init_tx_port(struct fm_port *port, struct dpa_fq *errq,
-+		struct dpa_fq *defq, struct dpa_buffer_layout_s *buf_layout)
-+{
-+	struct fm_port_params tx_port_param;
-+	bool frag_enabled = false;
-+
-+	memset(&tx_port_param, 0, sizeof(tx_port_param));
-+	dpaa_eth_init_port(tx, port, tx_port_param, errq->fqid, defq->fqid,
-+			   buf_layout, frag_enabled);
-+}
-+
-+static void
-+dpaa_eth_init_rx_port(struct fm_port *port, struct dpa_bp *bp, size_t count,
-+		struct dpa_fq *errq, struct dpa_fq *defq,
-+		struct dpa_buffer_layout_s *buf_layout)
-+{
-+	struct fm_port_params rx_port_param;
-+	int i;
-+	bool frag_enabled = false;
-+
-+	memset(&rx_port_param, 0, sizeof(rx_port_param));
-+	count = min(ARRAY_SIZE(rx_port_param.pool_param), count);
-+	rx_port_param.num_pools = (uint8_t)count;
-+	for (i = 0; i < count; i++) {
-+		if (i >= rx_port_param.num_pools)
-+			break;
-+		rx_port_param.pool_param[i].id = bp[i].bpid;
-+		rx_port_param.pool_param[i].size = (uint16_t)bp[i].size;
-+	}
-+
-+	dpaa_eth_init_port(rx, port, rx_port_param, errq->fqid, defq->fqid,
-+			   buf_layout, frag_enabled);
-+}
-+
-+#if defined(CONFIG_FSL_SDK_FMAN_TEST)
-+/* Defined as weak, to be implemented by fman pcd tester. */
-+int dpa_alloc_pcd_fqids(struct device *, uint32_t, uint8_t, uint32_t *)
-+__attribute__((weak));
-+
-+int dpa_free_pcd_fqids(struct device *, uint32_t) __attribute__((weak));
-+#else
-+int dpa_alloc_pcd_fqids(struct device *, uint32_t, uint8_t, uint32_t *);
-+
-+int dpa_free_pcd_fqids(struct device *, uint32_t);
-+
-+#endif /* CONFIG_FSL_SDK_FMAN_TEST */
-+
-+
-+int dpa_alloc_pcd_fqids(struct device *dev, uint32_t num,
-+				uint8_t alignment, uint32_t *base_fqid)
-+{
-+	dev_crit(dev, "callback not implemented!\n");
-+
-+	return 0;
-+}
-+
-+int dpa_free_pcd_fqids(struct device *dev, uint32_t base_fqid)
-+{
-+
-+	dev_crit(dev, "callback not implemented!\n");
-+
-+	return 0;
-+}
-+
-+void dpaa_eth_init_ports(struct mac_device *mac_dev,
-+		struct dpa_bp *bp, size_t count,
-+		struct fm_port_fqs *port_fqs,
-+		struct dpa_buffer_layout_s *buf_layout,
-+		struct device *dev)
-+{
-+	struct fm_port_pcd_param rx_port_pcd_param;
-+	struct fm_port *rxport = mac_dev->port_dev[RX];
-+	struct fm_port *txport = mac_dev->port_dev[TX];
-+
-+	dpaa_eth_init_tx_port(txport, port_fqs->tx_errq,
-+			      port_fqs->tx_defq, &buf_layout[TX]);
-+	dpaa_eth_init_rx_port(rxport, bp, count, port_fqs->rx_errq,
-+			      port_fqs->rx_defq, &buf_layout[RX]);
-+
-+	rx_port_pcd_param.cba = dpa_alloc_pcd_fqids;
-+	rx_port_pcd_param.cbf = dpa_free_pcd_fqids;
-+	rx_port_pcd_param.dev = dev;
-+	fm_port_pcd_bind(rxport, &rx_port_pcd_param);
-+}
-+EXPORT_SYMBOL(dpaa_eth_init_ports);
-+
-+void dpa_release_sgt(struct qm_sg_entry *sgt)
-+{
-+	struct dpa_bp *dpa_bp;
-+	struct bm_buffer bmb[DPA_BUFF_RELEASE_MAX];
-+	uint8_t i = 0, j;
-+
-+	memset(bmb, 0, DPA_BUFF_RELEASE_MAX * sizeof(struct bm_buffer));
-+
-+	do {
-+		dpa_bp = dpa_bpid2pool(qm_sg_entry_get_bpid(&sgt[i]));
-+		DPA_BUG_ON(!dpa_bp);
-+
-+		j = 0;
-+		do {
-+			DPA_BUG_ON(qm_sg_entry_get_ext(&sgt[i]));
-+			bm_buffer_set64(&bmb[j], qm_sg_addr(&sgt[i]));
-+
-+			j++; i++;
-+		} while (j < ARRAY_SIZE(bmb) &&
-+			!qm_sg_entry_get_final(&sgt[i-1]) &&
-+			qm_sg_entry_get_bpid(&sgt[i-1]) ==
-+			qm_sg_entry_get_bpid(&sgt[i]));
-+
-+		while (bman_release(dpa_bp->pool, bmb, j, 0))
-+			cpu_relax();
-+	} while (!qm_sg_entry_get_final(&sgt[i-1]));
-+}
-+EXPORT_SYMBOL(dpa_release_sgt);
-+
-+void __attribute__((nonnull))
-+dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd)
-+{
-+	struct qm_sg_entry	*sgt;
-+	struct dpa_bp		*dpa_bp;
-+	struct bm_buffer	bmb;
-+	dma_addr_t		addr;
-+	void			*vaddr;
-+
-+	bmb.opaque = 0;
-+	bm_buffer_set64(&bmb, qm_fd_addr(fd));
-+
-+	dpa_bp = dpa_bpid2pool(fd->bpid);
-+	DPA_BUG_ON(!dpa_bp);
-+
-+	if (fd->format == qm_fd_sg) {
-+		vaddr = phys_to_virt(qm_fd_addr(fd));
-+		sgt = vaddr + dpa_fd_offset(fd);
-+
-+		dma_unmap_single(dpa_bp->dev, qm_fd_addr(fd), dpa_bp->size,
-+				 DMA_BIDIRECTIONAL);
-+
-+		dpa_release_sgt(sgt);
-+		addr = dma_map_single(dpa_bp->dev, vaddr, dpa_bp->size,
-+				      DMA_BIDIRECTIONAL);
-+		if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
-+			dev_err(dpa_bp->dev, "DMA mapping failed");
-+			return;
-+		}
-+		bm_buffer_set64(&bmb, addr);
-+	}
-+
-+	while (bman_release(dpa_bp->pool, &bmb, 1, 0))
-+		cpu_relax();
-+}
-+EXPORT_SYMBOL(dpa_fd_release);
-+
-+void count_ern(struct dpa_percpu_priv_s *percpu_priv,
-+		      const struct qm_mr_entry *msg)
-+{
-+	switch (msg->ern.rc & QM_MR_RC_MASK) {
-+	case QM_MR_RC_CGR_TAILDROP:
-+		percpu_priv->ern_cnt.cg_tdrop++;
-+		break;
-+	case QM_MR_RC_WRED:
-+		percpu_priv->ern_cnt.wred++;
-+		break;
-+	case QM_MR_RC_ERROR:
-+		percpu_priv->ern_cnt.err_cond++;
-+		break;
-+	case QM_MR_RC_ORPWINDOW_EARLY:
-+		percpu_priv->ern_cnt.early_window++;
-+		break;
-+	case QM_MR_RC_ORPWINDOW_LATE:
-+		percpu_priv->ern_cnt.late_window++;
-+		break;
-+	case QM_MR_RC_FQ_TAILDROP:
-+		percpu_priv->ern_cnt.fq_tdrop++;
-+		break;
-+	case QM_MR_RC_ORPWINDOW_RETIRED:
-+		percpu_priv->ern_cnt.fq_retired++;
-+		break;
-+	case QM_MR_RC_ORP_ZERO:
-+		percpu_priv->ern_cnt.orp_zero++;
-+		break;
-+	}
-+}
-+EXPORT_SYMBOL(count_ern);
-+
-+/**
-+ * Turn on HW checksum computation for this outgoing frame.
-+ * If the current protocol is not something we support in this regard
-+ * (or if the stack has already computed the SW checksum), we do nothing.
-+ *
-+ * Returns 0 if all goes well (or HW csum doesn't apply), and a negative value
-+ * otherwise.
-+ *
-+ * Note that this function may modify the fd->cmd field and the skb data buffer
-+ * (the Parse Results area).
-+ */
-+int dpa_enable_tx_csum(struct dpa_priv_s *priv,
-+	struct sk_buff *skb, struct qm_fd *fd, char *parse_results)
-+{
-+	fm_prs_result_t *parse_result;
-+	struct iphdr *iph;
-+	struct ipv6hdr *ipv6h = NULL;
-+	u8 l4_proto;
-+	u16 ethertype = ntohs(skb->protocol);
-+	int retval = 0;
-+
-+	if (skb->ip_summed != CHECKSUM_PARTIAL)
-+		return 0;
-+
-+	/* Note: L3 csum seems to be already computed in sw, but we can't choose
-+	 * L4 alone from the FM configuration anyway.
-+	 */
-+
-+	/* Fill in some fields of the Parse Results array, so the FMan
-+	 * can find them as if they came from the FMan Parser.
-+	 */
-+	parse_result = (fm_prs_result_t *)parse_results;
-+
-+	/* If we're dealing with VLAN, get the real Ethernet type */
-+	if (ethertype == ETH_P_8021Q) {
-+		/* We can't always assume the MAC header is set correctly
-+		 * by the stack, so reset to beginning of skb->data
-+		 */
-+		skb_reset_mac_header(skb);
-+		ethertype = ntohs(vlan_eth_hdr(skb)->h_vlan_encapsulated_proto);
-+	}
-+
-+	/* Fill in the relevant L3 parse result fields
-+	 * and read the L4 protocol type
-+	 */
-+	switch (ethertype) {
-+	case ETH_P_IP:
-+		parse_result->l3r = cpu_to_be16(FM_L3_PARSE_RESULT_IPV4);
-+		iph = ip_hdr(skb);
-+		DPA_BUG_ON(iph == NULL);
-+		l4_proto = iph->protocol;
-+		break;
-+	case ETH_P_IPV6:
-+		parse_result->l3r = cpu_to_be16(FM_L3_PARSE_RESULT_IPV6);
-+		ipv6h = ipv6_hdr(skb);
-+		DPA_BUG_ON(ipv6h == NULL);
-+		l4_proto = ipv6h->nexthdr;
-+		break;
-+	default:
-+		/* We shouldn't even be here */
-+		if (netif_msg_tx_err(priv) && net_ratelimit())
-+			netdev_alert(priv->net_dev,
-+				     "Can't compute HW csum for L3 proto 0x%x\n",
-+				     ntohs(skb->protocol));
-+		retval = -EIO;
-+		goto return_error;
-+	}
-+
-+	/* Fill in the relevant L4 parse result fields */
-+	switch (l4_proto) {
-+	case IPPROTO_UDP:
-+		parse_result->l4r = FM_L4_PARSE_RESULT_UDP;
-+		break;
-+	case IPPROTO_TCP:
-+		parse_result->l4r = FM_L4_PARSE_RESULT_TCP;
-+		break;
-+	default:
-+		/* This can as well be a BUG() */
-+		if (netif_msg_tx_err(priv) && net_ratelimit())
-+			netdev_alert(priv->net_dev,
-+				     "Can't compute HW csum for L4 proto 0x%x\n",
-+				     l4_proto);
-+		retval = -EIO;
-+		goto return_error;
-+	}
-+
-+	/* At index 0 is IPOffset_1 as defined in the Parse Results */
-+	parse_result->ip_off[0] = (uint8_t)skb_network_offset(skb);
-+	parse_result->l4_off = (uint8_t)skb_transport_offset(skb);
-+
-+	/* Enable L3 (and L4, if TCP or UDP) HW checksum. */
-+	fd->cmd |= FM_FD_CMD_RPD | FM_FD_CMD_DTC;
-+
-+	/* On P1023 and similar platforms fd->cmd interpretation could
-+	 * be disabled by setting CONTEXT_A bit ICMD; currently this bit
-+	 * is not set so we do not need to check; in the future, if/when
-+	 * using context_a we need to check this bit
-+	 */
-+
-+return_error:
-+	return retval;
-+}
-+EXPORT_SYMBOL(dpa_enable_tx_csum);
-+
-+#ifdef CONFIG_FSL_DPAA_CEETM
-+void dpa_enable_ceetm(struct net_device *dev)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(dev);
-+	priv->ceetm_en = true;
-+}
-+EXPORT_SYMBOL(dpa_enable_ceetm);
-+
-+void dpa_disable_ceetm(struct net_device *dev)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(dev);
-+	priv->ceetm_en = false;
-+}
-+EXPORT_SYMBOL(dpa_disable_ceetm);
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.h
-@@ -0,0 +1,226 @@
-+/* Copyright 2008-2013 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __DPAA_ETH_COMMON_H
-+#define __DPAA_ETH_COMMON_H
-+
-+#include <linux/etherdevice.h> /* struct net_device */
-+#include <linux/fsl_bman.h> /* struct bm_buffer */
-+#include <linux/of_platform.h> /* struct platform_device */
-+#include <linux/net_tstamp.h>	/* struct hwtstamp_config */
-+
-+#include "dpaa_eth.h"
-+#include "lnxwrp_fsl_fman.h"
-+
-+#define dpaa_eth_init_port(type, port, param, errq_id, defq_id, buf_layout,\
-+			   frag_enabled) \
-+{ \
-+	param.errq = errq_id; \
-+	param.defq = defq_id; \
-+	param.priv_data_size = buf_layout->priv_data_size; \
-+	param.parse_results = buf_layout->parse_results; \
-+	param.hash_results = buf_layout->hash_results; \
-+	param.frag_enable = frag_enabled; \
-+	param.time_stamp = buf_layout->time_stamp; \
-+	param.manip_extra_space = buf_layout->manip_extra_space; \
-+	param.data_align = buf_layout->data_align; \
-+	fm_set_##type##_port_params(port, &param); \
-+}
-+
-+#define DPA_SGT_MAX_ENTRIES 16 /* maximum number of entries in SG Table */
-+
-+#define DPA_SGT_ENTRIES_THRESHOLD	DPA_SGT_MAX_ENTRIES
-+
-+#define DPA_BUFF_RELEASE_MAX 8 /* maximum number of buffers released at once */
-+
-+#define DPA_RX_PCD_HI_PRIO_FQ_INIT_FAIL(dpa_fq, _errno) \
-+	(((dpa_fq)->fq_type == FQ_TYPE_RX_PCD_HI_PRIO) && \
-+	  (_errno == -EIO))
-+/* return codes for the dpaa-eth hooks */
-+enum dpaa_eth_hook_result {
-+	/* fd/skb was retained by the hook.
-+	 *
-+	 * On the Rx path, this means the Ethernet driver will _not_
-+	 * deliver the skb to the stack. Instead, the hook implementation
-+	 * is expected to properly dispose of the skb.
-+	 *
-+	 * On the Tx path, the Ethernet driver's dpa_tx() function will
-+	 * immediately return NETDEV_TX_OK. The hook implementation is expected
-+	 * to free the skb. *DO*NOT* release it to BMan, or enqueue it to FMan,
-+	 * unless you know exactly what you're doing!
-+	 *
-+	 * On the confirmation/error paths, the Ethernet driver will _not_
-+	 * perform any fd cleanup, nor update the interface statistics.
-+	 */
-+	DPAA_ETH_STOLEN,
-+	/* fd/skb was returned to the Ethernet driver for regular processing.
-+	 * The hook is not allowed to, for instance, reallocate the skb (as if
-+	 * by linearizing, copying, cloning or reallocating the headroom).
-+	 */
-+	DPAA_ETH_CONTINUE
-+};
-+
-+typedef enum dpaa_eth_hook_result (*dpaa_eth_ingress_hook_t)(
-+		struct sk_buff *skb, struct net_device *net_dev, u32 fqid);
-+typedef enum dpaa_eth_hook_result (*dpaa_eth_egress_hook_t)(
-+		struct sk_buff *skb, struct net_device *net_dev);
-+typedef enum dpaa_eth_hook_result (*dpaa_eth_confirm_hook_t)(
-+		struct net_device *net_dev, const struct qm_fd *fd, u32 fqid);
-+
-+/* used in napi related functions */
-+extern u16 qman_portal_max;
-+
-+/* from dpa_ethtool.c */
-+extern const struct ethtool_ops dpa_ethtool_ops;
-+
-+#ifdef CONFIG_FSL_DPAA_HOOKS
-+/* Various hooks used for unit-testing and/or fastpath optimizations.
-+ * Currently only one set of such hooks is supported.
-+ */
-+struct dpaa_eth_hooks_s {
-+	/* Invoked on the Tx private path, immediately after receiving the skb
-+	 * from the stack.
-+	 */
-+	dpaa_eth_egress_hook_t	tx;
-+
-+	/* Invoked on the Rx private path, right before passing the skb
-+	 * up the stack. At that point, the packet's protocol id has already
-+	 * been set. The skb's data pointer is now at the L3 header, and
-+	 * skb->mac_header points to the L2 header. skb->len has been adjusted
-+	 * to be the length of L3+payload (i.e., the length of the
-+	 * original frame minus the L2 header len).
-+	 * For more details on what the skb looks like, see eth_type_trans().
-+	 */
-+	dpaa_eth_ingress_hook_t	rx_default;
-+
-+	/* Driver hook for the Rx error private path. */
-+	dpaa_eth_confirm_hook_t rx_error;
-+	/* Driver hook for the Tx confirmation private path. */
-+	dpaa_eth_confirm_hook_t tx_confirm;
-+	/* Driver hook for the Tx error private path. */
-+	dpaa_eth_confirm_hook_t tx_error;
-+};
-+
-+void fsl_dpaa_eth_set_hooks(struct dpaa_eth_hooks_s *hooks);
-+
-+extern struct dpaa_eth_hooks_s dpaa_eth_hooks;
-+#endif
-+
-+int dpa_netdev_init(struct net_device *net_dev,
-+		    const uint8_t *mac_addr,
-+		    uint16_t tx_timeout);
-+int __cold dpa_start(struct net_device *net_dev);
-+int __cold dpa_stop(struct net_device *net_dev);
-+void __cold dpa_timeout(struct net_device *net_dev);
-+void __cold
-+dpa_get_stats64(struct net_device *net_dev,
-+		struct rtnl_link_stats64 *stats);
-+int dpa_change_mtu(struct net_device *net_dev, int new_mtu);
-+int dpa_ndo_init(struct net_device *net_dev);
-+int dpa_set_features(struct net_device *dev, netdev_features_t features);
-+netdev_features_t dpa_fix_features(struct net_device *dev,
-+		netdev_features_t features);
-+#ifdef CONFIG_FSL_DPAA_TS
-+u64 dpa_get_timestamp_ns(const struct dpa_priv_s *priv,
-+			enum port_type rx_tx, const void *data);
-+/* Updates the skb shared hw timestamp from the hardware timestamp */
-+int dpa_get_ts(const struct dpa_priv_s *priv, enum port_type rx_tx,
-+	struct skb_shared_hwtstamps *shhwtstamps, const void *data);
-+#endif /* CONFIG_FSL_DPAA_TS */
-+int dpa_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-+int __cold dpa_remove(struct platform_device *of_dev);
-+struct mac_device * __cold __must_check
-+__attribute__((nonnull)) dpa_mac_probe(struct platform_device *_of_dev);
-+int dpa_set_mac_address(struct net_device *net_dev, void *addr);
-+void dpa_set_rx_mode(struct net_device *net_dev);
-+void dpa_set_buffers_layout(struct mac_device *mac_dev,
-+		struct dpa_buffer_layout_s *layout);
-+int __attribute__((nonnull))
-+dpa_bp_alloc(struct dpa_bp *dpa_bp);
-+void __cold __attribute__((nonnull))
-+dpa_bp_free(struct dpa_priv_s *priv);
-+struct dpa_bp *dpa_bpid2pool(int bpid);
-+void dpa_bpid2pool_map(int bpid, struct dpa_bp *dpa_bp);
-+bool dpa_bpid2pool_use(int bpid);
-+void dpa_bp_drain(struct dpa_bp *bp);
-+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
-+u16 dpa_select_queue(struct net_device *net_dev, struct sk_buff *skb,
-+		     struct net_device *sb_dev,
-+		     select_queue_fallback_t fallback);
-+#endif
-+struct dpa_fq *dpa_fq_alloc(struct device *dev,
-+			    u32 fq_start,
-+			    u32 fq_count,
-+			    struct list_head *list,
-+			    enum dpa_fq_type fq_type);
-+int dpa_fq_probe_mac(struct device *dev, struct list_head *list,
-+		     struct fm_port_fqs *port_fqs,
-+		     bool tx_conf_fqs_per_core,
-+		     enum port_type ptype);
-+int dpa_get_channel(void);
-+void dpa_release_channel(void);
-+void dpaa_eth_add_channel(u16 channel);
-+int dpaa_eth_cgr_init(struct dpa_priv_s *priv);
-+void dpa_fq_setup(struct dpa_priv_s *priv, const struct dpa_fq_cbs_t *fq_cbs,
-+		struct fm_port *tx_port);
-+int dpa_fq_init(struct dpa_fq *dpa_fq, bool td_enable);
-+int dpa_fqs_init(struct device *dev, struct list_head *list, bool td_enable);
-+int __cold __attribute__((nonnull))
-+dpa_fq_free(struct device *dev, struct list_head *list);
-+void dpaa_eth_init_ports(struct mac_device *mac_dev,
-+		struct dpa_bp *bp, size_t count,
-+		struct fm_port_fqs *port_fqs,
-+		struct dpa_buffer_layout_s *buf_layout,
-+		struct device *dev);
-+void dpa_release_sgt(struct qm_sg_entry *sgt);
-+void __attribute__((nonnull))
-+dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd);
-+void count_ern(struct dpa_percpu_priv_s *percpu_priv,
-+		      const struct qm_mr_entry *msg);
-+int dpa_enable_tx_csum(struct dpa_priv_s *priv,
-+	struct sk_buff *skb, struct qm_fd *fd, char *parse_results);
-+#ifdef CONFIG_FSL_DPAA_CEETM
-+void dpa_enable_ceetm(struct net_device *dev);
-+void dpa_disable_ceetm(struct net_device *dev);
-+#endif
-+struct proxy_device {
-+		struct mac_device *mac_dev;
-+};
-+
-+/* mac device control functions exposed by proxy interface*/
-+int dpa_proxy_start(struct net_device *net_dev);
-+int dpa_proxy_stop(struct proxy_device *proxy_dev, struct net_device *net_dev);
-+int dpa_proxy_set_mac_address(struct proxy_device *proxy_dev,
-+			  struct net_device *net_dev);
-+int dpa_proxy_set_rx_mode(struct proxy_device *proxy_dev,
-+		      struct net_device *net_dev);
-+
-+#endif /* __DPAA_ETH_COMMON_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_proxy.c
-@@ -0,0 +1,381 @@
-+/* Copyright 2008-2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifdef CONFIG_FSL_DPAA_ETH_DEBUG
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": %s:%hu:%s() " fmt, \
-+	KBUILD_BASENAME".c", __LINE__, __func__
-+#else
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": " fmt
-+#endif
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include "dpaa_eth.h"
-+#include "dpaa_eth_common.h"
-+#include "dpaa_eth_base.h"
-+#include "lnxwrp_fsl_fman.h" /* fm_get_rx_extra_headroom(), fm_get_max_frm() */
-+#include "mac.h"
-+
-+#define DPA_DESCRIPTION "FSL DPAA Proxy initialization driver"
-+
-+MODULE_LICENSE("Dual BSD/GPL");
-+
-+MODULE_DESCRIPTION(DPA_DESCRIPTION);
-+
-+static int __cold dpa_eth_proxy_remove(struct platform_device *of_dev);
-+#ifdef CONFIG_PM
-+
-+static int proxy_suspend(struct device *dev)
-+{
-+	struct proxy_device *proxy_dev = dev_get_drvdata(dev);
-+	struct mac_device *mac_dev = proxy_dev->mac_dev;
-+	int err = 0;
-+
-+	err = fm_port_suspend(mac_dev->port_dev[RX]);
-+	if (err)
-+		goto port_suspend_failed;
-+
-+	err = fm_port_suspend(mac_dev->port_dev[TX]);
-+	if (err)
-+		err = fm_port_resume(mac_dev->port_dev[RX]);
-+
-+port_suspend_failed:
-+	return err;
-+}
-+
-+static int proxy_resume(struct device *dev)
-+{
-+	struct proxy_device *proxy_dev = dev_get_drvdata(dev);
-+	struct mac_device	*mac_dev = proxy_dev->mac_dev;
-+	int			err = 0;
-+
-+	err = fm_port_resume(mac_dev->port_dev[TX]);
-+	if (err)
-+		goto port_resume_failed;
-+
-+	err = fm_port_resume(mac_dev->port_dev[RX]);
-+	if (err)
-+		err = fm_port_suspend(mac_dev->port_dev[TX]);
-+
-+port_resume_failed:
-+	return err;
-+}
-+
-+static const struct dev_pm_ops proxy_pm_ops = {
-+	.suspend = proxy_suspend,
-+	.resume = proxy_resume,
-+};
-+
-+#define PROXY_PM_OPS (&proxy_pm_ops)
-+
-+#else /* CONFIG_PM */
-+
-+#define PROXY_PM_OPS NULL
-+
-+#endif /* CONFIG_PM */
-+
-+static int dpaa_eth_proxy_probe(struct platform_device *_of_dev)
-+{
-+	int err = 0, i;
-+	struct device *dev;
-+	struct device_node *dpa_node;
-+	struct dpa_bp *dpa_bp;
-+	struct list_head proxy_fq_list;
-+	size_t count;
-+	struct fm_port_fqs port_fqs;
-+	struct dpa_buffer_layout_s *buf_layout = NULL;
-+	struct mac_device *mac_dev;
-+	struct proxy_device *proxy_dev;
-+
-+	dev = &_of_dev->dev;
-+
-+	dpa_node = dev->of_node;
-+
-+	if (!of_device_is_available(dpa_node))
-+		return -ENODEV;
-+
-+	/* Get the buffer pools assigned to this interface */
-+	dpa_bp = dpa_bp_probe(_of_dev, &count);
-+	if (IS_ERR(dpa_bp))
-+		return PTR_ERR(dpa_bp);
-+
-+	mac_dev = dpa_mac_probe(_of_dev);
-+	if (IS_ERR(mac_dev))
-+		return PTR_ERR(mac_dev);
-+
-+	proxy_dev = devm_kzalloc(dev, sizeof(*proxy_dev), GFP_KERNEL);
-+	if (!proxy_dev) {
-+		dev_err(dev, "devm_kzalloc() failed\n");
-+		return -ENOMEM;
-+	}
-+
-+	proxy_dev->mac_dev = mac_dev;
-+	dev_set_drvdata(dev, proxy_dev);
-+
-+	/* We have physical ports, so we need to establish
-+	 * the buffer layout.
-+	 */
-+	buf_layout = devm_kzalloc(dev, 2 * sizeof(*buf_layout),
-+				  GFP_KERNEL);
-+	if (!buf_layout) {
-+		dev_err(dev, "devm_kzalloc() failed\n");
-+		return -ENOMEM;
-+	}
-+	dpa_set_buffers_layout(mac_dev, buf_layout);
-+
-+	INIT_LIST_HEAD(&proxy_fq_list);
-+
-+	memset(&port_fqs, 0, sizeof(port_fqs));
-+
-+	err = dpa_fq_probe_mac(dev, &proxy_fq_list, &port_fqs, true, RX);
-+	if (!err)
-+		err = dpa_fq_probe_mac(dev, &proxy_fq_list, &port_fqs, true,
-+				       TX);
-+	if (err < 0) {
-+		devm_kfree(dev, buf_layout);
-+		return err;
-+	}
-+
-+	/* Proxy initializer - Just configures the MAC on behalf of
-+	 * another partition.
-+	 */
-+	dpaa_eth_init_ports(mac_dev, dpa_bp, count, &port_fqs,
-+			buf_layout, dev);
-+
-+	/* Proxy interfaces need to be started, and the allocated
-+	 * memory freed
-+	 */
-+	devm_kfree(dev, buf_layout);
-+	devm_kfree(dev, dpa_bp);
-+
-+	/* Free FQ structures */
-+	devm_kfree(dev, port_fqs.rx_defq);
-+	devm_kfree(dev, port_fqs.rx_errq);
-+	devm_kfree(dev, port_fqs.tx_defq);
-+	devm_kfree(dev, port_fqs.tx_errq);
-+
-+	for_each_port_device(i, mac_dev->port_dev) {
-+		err = fm_port_enable(mac_dev->port_dev[i]);
-+		if (err)
-+			goto port_enable_fail;
-+	}
-+
-+	dev_info(dev, "probed MAC device with MAC address: %02hx:%02hx:%02hx:%02hx:%02hx:%02hx\n",
-+		     mac_dev->addr[0], mac_dev->addr[1], mac_dev->addr[2],
-+		     mac_dev->addr[3], mac_dev->addr[4], mac_dev->addr[5]);
-+
-+	return 0; /* Proxy interface initialization ended */
-+
-+port_enable_fail:
-+	for_each_port_device(i, mac_dev->port_dev)
-+		fm_port_disable(mac_dev->port_dev[i]);
-+	dpa_eth_proxy_remove(_of_dev);
-+
-+	return err;
-+}
-+
-+int dpa_proxy_set_mac_address(struct proxy_device *proxy_dev,
-+			  struct net_device *net_dev)
-+{
-+	struct mac_device	*mac_dev;
-+	int			 _errno;
-+
-+	mac_dev = proxy_dev->mac_dev;
-+
-+	_errno = mac_dev->change_addr(mac_dev->get_mac_handle(mac_dev),
-+			net_dev->dev_addr);
-+	if (_errno < 0)
-+		return _errno;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(dpa_proxy_set_mac_address);
-+
-+int dpa_proxy_set_rx_mode(struct proxy_device *proxy_dev,
-+		       struct net_device *net_dev)
-+{
-+	struct mac_device *mac_dev = proxy_dev->mac_dev;
-+	int _errno;
-+
-+	if (!!(net_dev->flags & IFF_PROMISC) != mac_dev->promisc) {
-+		mac_dev->promisc = !mac_dev->promisc;
-+		_errno = mac_dev->set_promisc(mac_dev->get_mac_handle(mac_dev),
-+				mac_dev->promisc);
-+		if (unlikely(_errno < 0))
-+			netdev_err(net_dev, "mac_dev->set_promisc() = %d\n",
-+					_errno);
-+	}
-+
-+	_errno = mac_dev->set_multi(net_dev, mac_dev);
-+	if (unlikely(_errno < 0))
-+		return _errno;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(dpa_proxy_set_rx_mode);
-+
-+int dpa_proxy_start(struct net_device *net_dev)
-+{
-+	struct mac_device	*mac_dev;
-+	const struct dpa_priv_s	*priv;
-+	struct proxy_device	*proxy_dev;
-+	int			 _errno;
-+	int			i;
-+
-+	priv = netdev_priv(net_dev);
-+	proxy_dev = (struct proxy_device *)priv->peer;
-+	mac_dev = proxy_dev->mac_dev;
-+
-+	_errno = mac_dev->init_phy(net_dev, mac_dev);
-+	if (_errno < 0) {
-+		if (netif_msg_drv(priv))
-+			netdev_err(net_dev, "init_phy() = %d\n",
-+					_errno);
-+		return _errno;
-+	}
-+
-+	for_each_port_device(i, mac_dev->port_dev) {
-+		_errno = fm_port_enable(mac_dev->port_dev[i]);
-+		if (_errno)
-+			goto port_enable_fail;
-+	}
-+
-+	_errno = mac_dev->start(mac_dev);
-+	if (_errno < 0) {
-+		if (netif_msg_drv(priv))
-+			netdev_err(net_dev, "mac_dev->start() = %d\n",
-+					_errno);
-+		goto port_enable_fail;
-+	}
-+
-+	return _errno;
-+
-+port_enable_fail:
-+	for_each_port_device(i, mac_dev->port_dev)
-+		fm_port_disable(mac_dev->port_dev[i]);
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(dpa_proxy_start);
-+
-+int dpa_proxy_stop(struct proxy_device *proxy_dev, struct net_device *net_dev)
-+{
-+	struct mac_device *mac_dev = proxy_dev->mac_dev;
-+	const struct dpa_priv_s	*priv = netdev_priv(net_dev);
-+	int _errno, i, err;
-+
-+	_errno = mac_dev->stop(mac_dev);
-+	if (_errno < 0) {
-+		if (netif_msg_drv(priv))
-+			netdev_err(net_dev, "mac_dev->stop() = %d\n",
-+					_errno);
-+		return _errno;
-+	}
-+
-+	for_each_port_device(i, mac_dev->port_dev) {
-+		err = fm_port_disable(mac_dev->port_dev[i]);
-+		_errno = err ? err : _errno;
-+	}
-+
-+	if (mac_dev->phy_dev)
-+		phy_disconnect(mac_dev->phy_dev);
-+	mac_dev->phy_dev = NULL;
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(dpa_proxy_stop);
-+
-+static int __cold dpa_eth_proxy_remove(struct platform_device *of_dev)
-+{
-+	struct device *dev = &of_dev->dev;
-+	struct proxy_device *proxy_dev = dev_get_drvdata(dev);
-+
-+	kfree(proxy_dev);
-+
-+	dev_set_drvdata(dev, NULL);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id dpa_proxy_match[] = {
-+	{
-+		.compatible	= "fsl,dpa-ethernet-init"
-+	},
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, dpa_proxy_match);
-+
-+static struct platform_driver dpa_proxy_driver = {
-+	.driver = {
-+		.name		= KBUILD_MODNAME "-proxy",
-+		.of_match_table	= dpa_proxy_match,
-+		.owner		= THIS_MODULE,
-+		.pm		= PROXY_PM_OPS,
-+	},
-+	.probe		= dpaa_eth_proxy_probe,
-+	.remove		= dpa_eth_proxy_remove
-+};
-+
-+static int __init __cold dpa_proxy_load(void)
-+{
-+	int	 _errno;
-+
-+	pr_info(DPA_DESCRIPTION "\n");
-+
-+	/* Initialize dpaa_eth mirror values */
-+	dpa_rx_extra_headroom = fm_get_rx_extra_headroom();
-+	dpa_max_frm = fm_get_max_frm();
-+
-+	_errno = platform_driver_register(&dpa_proxy_driver);
-+	if (unlikely(_errno < 0)) {
-+		pr_err(KBUILD_MODNAME
-+			": %s:%hu:%s(): platform_driver_register() = %d\n",
-+			KBUILD_BASENAME".c", __LINE__, __func__, _errno);
-+	}
-+
-+	pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
-+		KBUILD_BASENAME".c", __func__);
-+
-+	return _errno;
-+}
-+module_init(dpa_proxy_load);
-+
-+static void __exit __cold dpa_proxy_unload(void)
-+{
-+	platform_driver_unregister(&dpa_proxy_driver);
-+
-+	pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
-+		KBUILD_BASENAME".c", __func__);
-+}
-+module_exit(dpa_proxy_unload);
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -0,0 +1,1113 @@
-+/* Copyright 2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifdef CONFIG_FSL_DPAA_ETH_DEBUG
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": %s:%hu:%s() " fmt, \
-+	KBUILD_BASENAME".c", __LINE__, __func__
-+#else
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": " fmt
-+#endif
-+
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <linux/highmem.h>
-+#include <linux/fsl_bman.h>
-+
-+#include "dpaa_eth.h"
-+#include "dpaa_eth_common.h"
-+#ifdef CONFIG_FSL_DPAA_1588
-+#include "dpaa_1588.h"
-+#endif
-+#ifdef CONFIG_FSL_DPAA_CEETM
-+#include "dpaa_eth_ceetm.h"
-+#endif
-+
-+/* DMA map and add a page frag back into the bpool.
-+ * @vaddr fragment must have been allocated with netdev_alloc_frag(),
-+ * specifically for fitting into @dpa_bp.
-+ */
-+static void dpa_bp_recycle_frag(struct dpa_bp *dpa_bp, unsigned long vaddr,
-+				int *count_ptr)
-+{
-+	struct bm_buffer bmb;
-+	dma_addr_t addr;
-+
-+	bmb.opaque = 0;
-+
-+	addr = dma_map_single(dpa_bp->dev, (void *)vaddr, dpa_bp->size,
-+			      DMA_BIDIRECTIONAL);
-+	if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
-+		dev_err(dpa_bp->dev, "DMA mapping failed");
-+		return;
-+	}
-+
-+	bm_buffer_set64(&bmb, addr);
-+
-+	while (bman_release(dpa_bp->pool, &bmb, 1, 0))
-+		cpu_relax();
-+
-+	(*count_ptr)++;
-+}
-+
-+static int _dpa_bp_add_8_bufs(const struct dpa_bp *dpa_bp)
-+{
-+	struct bm_buffer bmb[8];
-+	void *new_buf;
-+	dma_addr_t addr;
-+	uint8_t i;
-+	struct device *dev = dpa_bp->dev;
-+	struct sk_buff *skb, **skbh;
-+
-+	memset(bmb, 0, sizeof(struct bm_buffer) * 8);
-+
-+	for (i = 0; i < 8; i++) {
-+		/* We'll prepend the skb back-pointer; can't use the DPA
-+		 * priv space, because FMan will overwrite it (from offset 0)
-+		 * if it ends up being the second, third, etc. fragment
-+		 * in a S/G frame.
-+		 *
-+		 * We only need enough space to store a pointer, but allocate
-+		 * an entire cacheline for performance reasons.
-+		 */
-+#ifndef CONFIG_PPC
-+		if (unlikely(dpaa_errata_a010022))
-+			new_buf = page_address(alloc_page(GFP_ATOMIC));
-+		else
-+#endif
-+		new_buf = netdev_alloc_frag(SMP_CACHE_BYTES + DPA_BP_RAW_SIZE);
-+
-+		if (unlikely(!new_buf))
-+			goto netdev_alloc_failed;
-+		new_buf = PTR_ALIGN(new_buf + SMP_CACHE_BYTES, SMP_CACHE_BYTES);
-+
-+		skb = build_skb(new_buf, DPA_SKB_SIZE(dpa_bp->size) +
-+			SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
-+		if (unlikely(!skb)) {
-+			put_page(virt_to_head_page(new_buf));
-+			goto build_skb_failed;
-+		}
-+		DPA_WRITE_SKB_PTR(skb, skbh, new_buf, -1);
-+
-+		addr = dma_map_single(dev, new_buf,
-+				dpa_bp->size, DMA_BIDIRECTIONAL);
-+		if (unlikely(dma_mapping_error(dev, addr)))
-+			goto dma_map_failed;
-+
-+		bm_buffer_set64(&bmb[i], addr);
-+	}
-+
-+release_bufs:
-+	/* Release the buffers. In case bman is busy, keep trying
-+	 * until successful. bman_release() is guaranteed to succeed
-+	 * in a reasonable amount of time
-+	 */
-+	while (unlikely(bman_release(dpa_bp->pool, bmb, i, 0)))
-+		cpu_relax();
-+	return i;
-+
-+dma_map_failed:
-+	kfree_skb(skb);
-+
-+build_skb_failed:
-+netdev_alloc_failed:
-+	net_err_ratelimited("dpa_bp_add_8_bufs() failed\n");
-+	WARN_ONCE(1, "Memory allocation failure on Rx\n");
-+
-+	bm_buffer_set64(&bmb[i], 0);
-+	/* Avoid releasing a completely null buffer; bman_release() requires
-+	 * at least one buffer.
-+	 */
-+	if (likely(i))
-+		goto release_bufs;
-+
-+	return 0;
-+}
-+
-+/* Cold path wrapper over _dpa_bp_add_8_bufs(). */
-+static void dpa_bp_add_8_bufs(const struct dpa_bp *dpa_bp, int cpu)
-+{
-+	int *count_ptr = per_cpu_ptr(dpa_bp->percpu_count, cpu);
-+	*count_ptr += _dpa_bp_add_8_bufs(dpa_bp);
-+}
-+
-+int dpa_bp_priv_seed(struct dpa_bp *dpa_bp)
-+{
-+	int i;
-+
-+	/* Give each CPU an allotment of "config_count" buffers */
-+	for_each_possible_cpu(i) {
-+		int j;
-+
-+		/* Although we access another CPU's counters here
-+		 * we do it at boot time so it is safe
-+		 */
-+		for (j = 0; j < dpa_bp->config_count; j += 8)
-+			dpa_bp_add_8_bufs(dpa_bp, i);
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(dpa_bp_priv_seed);
-+
-+/* Add buffers/(pages) for Rx processing whenever bpool count falls below
-+ * REFILL_THRESHOLD.
-+ */
-+int dpaa_eth_refill_bpools(struct dpa_bp *dpa_bp, int *countptr)
-+{
-+	int count = *countptr;
-+	int new_bufs;
-+
-+	if (unlikely(count < CONFIG_FSL_DPAA_ETH_REFILL_THRESHOLD)) {
-+		do {
-+			new_bufs = _dpa_bp_add_8_bufs(dpa_bp);
-+			if (unlikely(!new_bufs)) {
-+				/* Avoid looping forever if we've temporarily
-+				 * run out of memory. We'll try again at the
-+				 * next NAPI cycle.
-+				 */
-+				break;
-+			}
-+			count += new_bufs;
-+		} while (count < CONFIG_FSL_DPAA_ETH_MAX_BUF_COUNT);
-+
-+		*countptr = count;
-+		if (unlikely(count < CONFIG_FSL_DPAA_ETH_MAX_BUF_COUNT))
-+			return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(dpaa_eth_refill_bpools);
-+
-+/* Cleanup function for outgoing frame descriptors that were built on Tx path,
-+ * either contiguous frames or scatter/gather ones.
-+ * Skb freeing is not handled here.
-+ *
-+ * This function may be called on error paths in the Tx function, so guard
-+ * against cases when not all fd relevant fields were filled in.
-+ *
-+ * Return the skb backpointer, since for S/G frames the buffer containing it
-+ * gets freed here.
-+ */
-+struct sk_buff *_dpa_cleanup_tx_fd(const struct dpa_priv_s *priv,
-+	const struct qm_fd *fd)
-+{
-+	const struct qm_sg_entry *sgt;
-+	int i;
-+	struct dpa_bp *dpa_bp = priv->dpa_bp;
-+	dma_addr_t addr = qm_fd_addr(fd);
-+	dma_addr_t sg_addr;
-+	struct sk_buff **skbh;
-+	struct sk_buff *skb = NULL;
-+	const enum dma_data_direction dma_dir = DMA_TO_DEVICE;
-+	int nr_frags;
-+	int sg_len;
-+
-+	/* retrieve skb back pointer */
-+	DPA_READ_SKB_PTR(skb, skbh, phys_to_virt(addr), 0);
-+
-+	if (unlikely(fd->format == qm_fd_sg)) {
-+		nr_frags = skb_shinfo(skb)->nr_frags;
-+		dma_unmap_single(dpa_bp->dev, addr, dpa_fd_offset(fd) +
-+				 sizeof(struct qm_sg_entry) * (1 + nr_frags),
-+				 dma_dir);
-+
-+		/* The sgt buffer has been allocated with netdev_alloc_frag(),
-+		 * it's from lowmem.
-+		 */
-+		sgt = phys_to_virt(addr + dpa_fd_offset(fd));
-+#ifdef CONFIG_FSL_DPAA_1588
-+		if (priv->tsu && priv->tsu->valid &&
-+				priv->tsu->hwts_tx_en_ioctl)
-+			dpa_ptp_store_txstamp(priv, skb, (void *)skbh);
-+#endif
-+#ifdef CONFIG_FSL_DPAA_TS
-+		if (unlikely(priv->ts_tx_en &&
-+			skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
-+			struct skb_shared_hwtstamps shhwtstamps;
-+
-+			dpa_get_ts(priv, TX, &shhwtstamps, (void *)skbh);
-+			skb_tstamp_tx(skb, &shhwtstamps);
-+		}
-+#endif /* CONFIG_FSL_DPAA_TS */
-+
-+		/* sgt[0] is from lowmem, was dma_map_single()-ed */
-+		sg_addr = qm_sg_addr(&sgt[0]);
-+		sg_len = qm_sg_entry_get_len(&sgt[0]);
-+		dma_unmap_single(dpa_bp->dev, sg_addr, sg_len, dma_dir);
-+
-+		/* remaining pages were mapped with dma_map_page() */
-+		for (i = 1; i <= nr_frags; i++) {
-+			DPA_BUG_ON(qm_sg_entry_get_ext(&sgt[i]));
-+			sg_addr = qm_sg_addr(&sgt[i]);
-+			sg_len = qm_sg_entry_get_len(&sgt[i]);
-+			dma_unmap_page(dpa_bp->dev, sg_addr, sg_len, dma_dir);
-+		}
-+
-+		/* Free the page frag that we allocated on Tx */
-+		put_page(virt_to_head_page(sgt));
-+	} else {
-+		dma_unmap_single(dpa_bp->dev, addr,
-+				 skb_tail_pointer(skb) - (u8 *)skbh, dma_dir);
-+#ifdef CONFIG_FSL_DPAA_TS
-+		/* get the timestamp for non-SG frames */
-+#ifdef CONFIG_FSL_DPAA_1588
-+		if (priv->tsu && priv->tsu->valid &&
-+						priv->tsu->hwts_tx_en_ioctl)
-+			dpa_ptp_store_txstamp(priv, skb, (void *)skbh);
-+#endif
-+		if (unlikely(priv->ts_tx_en &&
-+				skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
-+			struct skb_shared_hwtstamps shhwtstamps;
-+
-+			dpa_get_ts(priv, TX, &shhwtstamps, (void *)skbh);
-+			skb_tstamp_tx(skb, &shhwtstamps);
-+		}
-+#endif
-+	}
-+
-+	return skb;
-+}
-+EXPORT_SYMBOL(_dpa_cleanup_tx_fd);
-+
-+#ifndef CONFIG_FSL_DPAA_TS
-+bool dpa_skb_is_recyclable(struct sk_buff *skb)
-+{
-+	/* No recycling possible if skb buffer is kmalloc'ed  */
-+	if (skb->head_frag == 0)
-+		return false;
-+
-+	/* or if it's an userspace buffer */
-+	if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY)
-+		return false;
-+
-+	/* or if it's cloned or shared */
-+	if (skb_shared(skb) || skb_cloned(skb) ||
-+	    skb->fclone != SKB_FCLONE_UNAVAILABLE)
-+		return false;
-+
-+	return true;
-+}
-+EXPORT_SYMBOL(dpa_skb_is_recyclable);
-+
-+bool dpa_buf_is_recyclable(struct sk_buff *skb,
-+				  uint32_t min_size,
-+				  uint16_t min_offset,
-+				  unsigned char **new_buf_start)
-+{
-+	unsigned char *new;
-+
-+	/* In order to recycle a buffer, the following conditions must be met:
-+	 * - buffer size no less than the buffer pool size
-+	 * - buffer size no higher than an upper limit (to avoid moving too much
-+	 *   system memory to the buffer pools)
-+	 * - buffer address aligned to cacheline bytes
-+	 * - offset of data from start of buffer no lower than a minimum value
-+	 * - offset of data from start of buffer no higher than a maximum value
-+	 */
-+	new = min(skb_end_pointer(skb) - min_size, skb->data - min_offset);
-+
-+	/* left align to the nearest cacheline */
-+	new = (unsigned char *)((unsigned long)new & ~(SMP_CACHE_BYTES - 1));
-+
-+	if (likely(new >= skb->head &&
-+		   new >= (skb->data - DPA_MAX_FD_OFFSET) &&
-+		   skb_end_pointer(skb) - new <= DPA_RECYCLE_MAX_SIZE)) {
-+		*new_buf_start = new;
-+		return true;
-+	}
-+
-+	return false;
-+}
-+EXPORT_SYMBOL(dpa_buf_is_recyclable);
-+#endif
-+
-+/* Build a linear skb around the received buffer.
-+ * We are guaranteed there is enough room at the end of the data buffer to
-+ * accommodate the shared info area of the skb.
-+ */
-+static struct sk_buff *__hot contig_fd_to_skb(const struct dpa_priv_s *priv,
-+	const struct qm_fd *fd, int *use_gro)
-+{
-+	dma_addr_t addr = qm_fd_addr(fd);
-+	ssize_t fd_off = dpa_fd_offset(fd);
-+	void *vaddr;
-+	const fm_prs_result_t *parse_results;
-+	struct sk_buff *skb = NULL, **skbh;
-+
-+	vaddr = phys_to_virt(addr);
-+	DPA_BUG_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES));
-+
-+	/* Retrieve the skb and adjust data and tail pointers, to make sure
-+	 * forwarded skbs will have enough space on Tx if extra headers
-+	 * are added.
-+	 */
-+	DPA_READ_SKB_PTR(skb, skbh, vaddr, -1);
-+
-+#ifdef CONFIG_FSL_DPAA_ETH_JUMBO_FRAME
-+	/* When using jumbo Rx buffers, we risk having frames dropped due to
-+	 * the socket backlog reaching its maximum allowed size.
-+	 * Use the frame length for the skb truesize instead of the buffer
-+	 * size, as this is the size of the data that actually gets copied to
-+	 * userspace.
-+	 * The stack may increase the payload. In this case, it will want to
-+	 * warn us that the frame length is larger than the truesize. We
-+	 * bypass the warning.
-+	 */
-+#ifndef CONFIG_PPC
-+	/* We do not support Jumbo frames on LS1043 and thus we edit
-+	 * the skb truesize only when the 4k errata is not present.
-+	 */
-+	if (likely(!dpaa_errata_a010022))
-+#endif
-+	skb->truesize = SKB_TRUESIZE(dpa_fd_length(fd));
-+#endif
-+
-+	DPA_BUG_ON(fd_off != priv->rx_headroom);
-+	skb_reserve(skb, fd_off);
-+	skb_put(skb, dpa_fd_length(fd));
-+
-+	/* Peek at the parse results for csum validation */
-+	parse_results = (const fm_prs_result_t *)(vaddr +
-+				DPA_RX_PRIV_DATA_SIZE);
-+	_dpa_process_parse_results(parse_results, fd, skb, use_gro);
-+
-+#ifdef CONFIG_FSL_DPAA_1588
-+	if (priv->tsu && priv->tsu->valid && priv->tsu->hwts_rx_en_ioctl)
-+		dpa_ptp_store_rxstamp(priv, skb, vaddr);
-+#endif
-+#ifdef CONFIG_FSL_DPAA_TS
-+	if (priv->ts_rx_en)
-+		dpa_get_ts(priv, RX, skb_hwtstamps(skb), vaddr);
-+#endif /* CONFIG_FSL_DPAA_TS */
-+
-+	return skb;
-+}
-+
-+
-+/* Build an skb with the data of the first S/G entry in the linear portion and
-+ * the rest of the frame as skb fragments.
-+ *
-+ * The page fragment holding the S/G Table is recycled here.
-+ */
-+static struct sk_buff *__hot sg_fd_to_skb(const struct dpa_priv_s *priv,
-+			       const struct qm_fd *fd, int *use_gro,
-+			       int *count_ptr)
-+{
-+	const struct qm_sg_entry *sgt;
-+	dma_addr_t addr = qm_fd_addr(fd);
-+	ssize_t fd_off = dpa_fd_offset(fd);
-+	dma_addr_t sg_addr;
-+	void *vaddr, *sg_vaddr;
-+	struct dpa_bp *dpa_bp;
-+	struct page *page, *head_page;
-+	int frag_offset, frag_len;
-+	int page_offset;
-+	int i;
-+	const fm_prs_result_t *parse_results;
-+	struct sk_buff *skb = NULL, *skb_tmp, **skbh;
-+
-+	vaddr = phys_to_virt(addr);
-+	DPA_BUG_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES));
-+
-+	dpa_bp = priv->dpa_bp;
-+	/* Iterate through the SGT entries and add data buffers to the skb */
-+	sgt = vaddr + fd_off;
-+	for (i = 0; i < DPA_SGT_MAX_ENTRIES; i++) {
-+		/* Extension bit is not supported */
-+		DPA_BUG_ON(qm_sg_entry_get_ext(&sgt[i]));
-+
-+		/* We use a single global Rx pool */
-+		DPA_BUG_ON(dpa_bp !=
-+			   dpa_bpid2pool(qm_sg_entry_get_bpid(&sgt[i])));
-+
-+		sg_addr = qm_sg_addr(&sgt[i]);
-+		sg_vaddr = phys_to_virt(sg_addr);
-+		DPA_BUG_ON(!IS_ALIGNED((unsigned long)sg_vaddr,
-+				SMP_CACHE_BYTES));
-+
-+		dma_unmap_single(dpa_bp->dev, sg_addr, dpa_bp->size,
-+				 DMA_BIDIRECTIONAL);
-+		if (i == 0) {
-+			DPA_READ_SKB_PTR(skb, skbh, sg_vaddr, -1);
-+			DPA_BUG_ON(skb->head != sg_vaddr);
-+#ifdef CONFIG_FSL_DPAA_1588
-+			if (priv->tsu && priv->tsu->valid &&
-+			    priv->tsu->hwts_rx_en_ioctl)
-+				dpa_ptp_store_rxstamp(priv, skb, vaddr);
-+#endif
-+#ifdef CONFIG_FSL_DPAA_TS
-+			if (priv->ts_rx_en)
-+				dpa_get_ts(priv, RX, skb_hwtstamps(skb), vaddr);
-+#endif /* CONFIG_FSL_DPAA_TS */
-+
-+			/* In the case of a SG frame, FMan stores the Internal
-+			 * Context in the buffer containing the sgt.
-+			 * Inspect the parse results before anything else.
-+			 */
-+			parse_results = (const fm_prs_result_t *)(vaddr +
-+						DPA_RX_PRIV_DATA_SIZE);
-+			_dpa_process_parse_results(parse_results, fd, skb,
-+						   use_gro);
-+
-+			/* Make sure forwarded skbs will have enough space
-+			 * on Tx, if extra headers are added.
-+			 */
-+			DPA_BUG_ON(fd_off != priv->rx_headroom);
-+			skb_reserve(skb, fd_off);
-+			skb_put(skb, qm_sg_entry_get_len(&sgt[i]));
-+		} else {
-+			/* Not the first S/G entry; all data from buffer will
-+			 * be added in an skb fragment; fragment index is offset
-+			 * by one since first S/G entry was incorporated in the
-+			 * linear part of the skb.
-+			 *
-+			 * Caution: 'page' may be a tail page.
-+			 */
-+			DPA_READ_SKB_PTR(skb_tmp, skbh, sg_vaddr, -1);
-+			page = virt_to_page(sg_vaddr);
-+			head_page = virt_to_head_page(sg_vaddr);
-+
-+			/* Free (only) the skbuff shell because its data buffer
-+			 * is already a frag in the main skb.
-+			 */
-+			get_page(head_page);
-+			dev_kfree_skb(skb_tmp);
-+
-+			/* Compute offset in (possibly tail) page */
-+			page_offset = ((unsigned long)sg_vaddr &
-+					(PAGE_SIZE - 1)) +
-+				(page_address(page) - page_address(head_page));
-+			/* page_offset only refers to the beginning of sgt[i];
-+			 * but the buffer itself may have an internal offset.
-+			 */
-+			frag_offset = qm_sg_entry_get_offset(&sgt[i]) +
-+					page_offset;
-+			frag_len = qm_sg_entry_get_len(&sgt[i]);
-+			/* skb_add_rx_frag() does no checking on the page; if
-+			 * we pass it a tail page, we'll end up with
-+			 * bad page accounting and eventually with segafults.
-+			 */
-+			skb_add_rx_frag(skb, i - 1, head_page, frag_offset,
-+				frag_len, dpa_bp->size);
-+		}
-+		/* Update the pool count for the current {cpu x bpool} */
-+		(*count_ptr)--;
-+
-+		if (qm_sg_entry_get_final(&sgt[i]))
-+			break;
-+	}
-+	WARN_ONCE(i == DPA_SGT_MAX_ENTRIES, "No final bit on SGT\n");
-+
-+	/* recycle the SGT fragment */
-+	DPA_BUG_ON(dpa_bp != dpa_bpid2pool(fd->bpid));
-+	dpa_bp_recycle_frag(dpa_bp, (unsigned long)vaddr, count_ptr);
-+	return skb;
-+}
-+
-+#ifdef CONFIG_FSL_DPAA_DBG_LOOP
-+static inline int dpa_skb_loop(const struct dpa_priv_s *priv,
-+		struct sk_buff *skb)
-+{
-+	if (unlikely(priv->loop_to < 0))
-+		return 0; /* loop disabled by default */
-+
-+	skb_push(skb, ETH_HLEN); /* compensate for eth_type_trans */
-+	dpa_tx(skb, dpa_loop_netdevs[priv->loop_to]);
-+
-+	return 1; /* Frame Tx on the selected interface */
-+}
-+#endif
-+
-+void __hot _dpa_rx(struct net_device *net_dev,
-+		struct qman_portal *portal,
-+		const struct dpa_priv_s *priv,
-+		struct dpa_percpu_priv_s *percpu_priv,
-+		const struct qm_fd *fd,
-+		u32 fqid,
-+		int *count_ptr)
-+{
-+	struct dpa_bp *dpa_bp;
-+	struct sk_buff *skb;
-+	dma_addr_t addr = qm_fd_addr(fd);
-+	u32 fd_status = fd->status;
-+	unsigned int skb_len;
-+	struct rtnl_link_stats64 *percpu_stats = &percpu_priv->stats;
-+	int use_gro = net_dev->features & NETIF_F_GRO;
-+
-+	if (unlikely(fd_status & FM_FD_STAT_RX_ERRORS) != 0) {
-+		if (netif_msg_hw(priv) && net_ratelimit())
-+			netdev_warn(net_dev, "FD status = 0x%08x\n",
-+					fd_status & FM_FD_STAT_RX_ERRORS);
-+
-+		percpu_stats->rx_errors++;
-+		goto _release_frame;
-+	}
-+
-+	dpa_bp = priv->dpa_bp;
-+	DPA_BUG_ON(dpa_bp != dpa_bpid2pool(fd->bpid));
-+
-+	/* prefetch the first 64 bytes of the frame or the SGT start */
-+	dma_unmap_single(dpa_bp->dev, addr, dpa_bp->size, DMA_BIDIRECTIONAL);
-+	prefetch(phys_to_virt(addr) + dpa_fd_offset(fd));
-+
-+	/* The only FD types that we may receive are contig and S/G */
-+	DPA_BUG_ON((fd->format != qm_fd_contig) && (fd->format != qm_fd_sg));
-+
-+	if (likely(fd->format == qm_fd_contig)) {
-+#ifdef CONFIG_FSL_DPAA_HOOKS
-+		/* Execute the Rx processing hook, if it exists. */
-+		if (dpaa_eth_hooks.rx_default &&
-+			dpaa_eth_hooks.rx_default((void *)fd, net_dev,
-+					fqid) == DPAA_ETH_STOLEN) {
-+			/* won't count the rx bytes in */
-+			return;
-+		}
-+#endif
-+		skb = contig_fd_to_skb(priv, fd, &use_gro);
-+	} else {
-+		skb = sg_fd_to_skb(priv, fd, &use_gro, count_ptr);
-+		percpu_priv->rx_sg++;
-+	}
-+
-+	/* Account for either the contig buffer or the SGT buffer (depending on
-+	 * which case we were in) having been removed from the pool.
-+	 */
-+	(*count_ptr)--;
-+	skb->protocol = eth_type_trans(skb, net_dev);
-+
-+	/* IP Reassembled frames are allowed to be larger than MTU */
-+	if (unlikely(dpa_check_rx_mtu(skb, net_dev->mtu) &&
-+		!(fd_status & FM_FD_IPR))) {
-+		percpu_stats->rx_dropped++;
-+		goto drop_bad_frame;
-+	}
-+
-+	skb_len = skb->len;
-+
-+#ifdef CONFIG_FSL_DPAA_DBG_LOOP
-+	if (dpa_skb_loop(priv, skb)) {
-+		percpu_stats->rx_packets++;
-+		percpu_stats->rx_bytes += skb_len;
-+		return;
-+	}
-+#endif
-+
-+	if (use_gro) {
-+		gro_result_t gro_result;
-+		const struct qman_portal_config *pc =
-+					qman_p_get_portal_config(portal);
-+		struct dpa_napi_portal *np = &percpu_priv->np[pc->index];
-+
-+		np->p = portal;
-+		gro_result = napi_gro_receive(&np->napi, skb);
-+		/* If frame is dropped by the stack, rx_dropped counter is
-+		 * incremented automatically, so no need for us to update it
-+		 */
-+		if (unlikely(gro_result == GRO_DROP))
-+			goto packet_dropped;
-+	} else if (unlikely(netif_receive_skb(skb) == NET_RX_DROP))
-+		goto packet_dropped;
-+
-+	percpu_stats->rx_packets++;
-+	percpu_stats->rx_bytes += skb_len;
-+
-+packet_dropped:
-+	return;
-+
-+drop_bad_frame:
-+	dev_kfree_skb(skb);
-+	return;
-+
-+_release_frame:
-+	dpa_fd_release(net_dev, fd);
-+}
-+
-+int __hot skb_to_contig_fd(struct dpa_priv_s *priv,
-+			   struct sk_buff *skb, struct qm_fd *fd,
-+			   int *count_ptr, int *offset)
-+{
-+	struct sk_buff **skbh;
-+	dma_addr_t addr;
-+	struct dpa_bp *dpa_bp = priv->dpa_bp;
-+	struct net_device *net_dev = priv->net_dev;
-+	int err;
-+	enum dma_data_direction dma_dir;
-+	unsigned char *buffer_start;
-+	int dma_map_size;
-+
-+#ifndef CONFIG_FSL_DPAA_TS
-+	/* Check recycling conditions; only if timestamp support is not
-+	 * enabled, otherwise we need the fd back on tx confirmation
-+	 */
-+
-+	/* We can recycle the buffer if:
-+	 * - the pool is not full
-+	 * - the buffer meets the skb recycling conditions
-+	 * - the buffer meets our own (size, offset, align) conditions
-+	 */
-+	if (likely((*count_ptr < dpa_bp->target_count) &&
-+		   dpa_skb_is_recyclable(skb) &&
-+		   dpa_buf_is_recyclable(skb, dpa_bp->size,
-+					 priv->tx_headroom, &buffer_start))) {
-+		/* Buffer is recyclable; use the new start address
-+		 * and set fd parameters and DMA mapping direction
-+		 */
-+		fd->bpid = dpa_bp->bpid;
-+		DPA_BUG_ON(skb->data - buffer_start > DPA_MAX_FD_OFFSET);
-+		fd->offset = (uint16_t)(skb->data - buffer_start);
-+		dma_dir = DMA_BIDIRECTIONAL;
-+		dma_map_size = dpa_bp->size;
-+
-+		DPA_WRITE_SKB_PTR(skb, skbh, buffer_start, -1);
-+		*offset = skb_headroom(skb) - fd->offset;
-+	} else
-+#endif
-+	{
-+		/* Not recyclable.
-+		 * We are guaranteed to have at least tx_headroom bytes
-+		 * available, so just use that for offset.
-+		 */
-+		fd->bpid = 0xff;
-+		buffer_start = skb->data - priv->tx_headroom;
-+		fd->offset = priv->tx_headroom;
-+		dma_dir = DMA_TO_DEVICE;
-+		dma_map_size = skb_tail_pointer(skb) - buffer_start;
-+
-+		/* The buffer will be Tx-confirmed, but the TxConf cb must
-+		 * necessarily look at our Tx private data to retrieve the
-+		 * skbuff. (In short: can't use DPA_WRITE_SKB_PTR() here.)
-+		 */
-+		DPA_WRITE_SKB_PTR(skb, skbh, buffer_start, 0);
-+	}
-+
-+	/* Enable L3/L4 hardware checksum computation.
-+	 *
-+	 * We must do this before dma_map_single(DMA_TO_DEVICE), because we may
-+	 * need to write into the skb.
-+	 */
-+	err = dpa_enable_tx_csum(priv, skb, fd,
-+				 ((char *)skbh) + DPA_TX_PRIV_DATA_SIZE);
-+	if (unlikely(err < 0)) {
-+		if (netif_msg_tx_err(priv) && net_ratelimit())
-+			netdev_err(net_dev, "HW csum error: %d\n", err);
-+		return err;
-+	}
-+
-+	/* Fill in the rest of the FD fields */
-+	fd->format = qm_fd_contig;
-+	fd->length20 = skb->len;
-+	fd->cmd |= FM_FD_CMD_FCO;
-+
-+	/* Map the entire buffer size that may be seen by FMan, but no more */
-+	addr = dma_map_single(dpa_bp->dev, skbh, dma_map_size, dma_dir);
-+	if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
-+		if (netif_msg_tx_err(priv) && net_ratelimit())
-+			netdev_err(net_dev, "dma_map_single() failed\n");
-+		return -EINVAL;
-+	}
-+	qm_fd_addr_set64(fd, addr);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(skb_to_contig_fd);
-+
-+#ifndef CONFIG_PPC
-+struct sk_buff *split_skb_at_4k_boundaries(struct sk_buff *skb)
-+{
-+	unsigned int length, nr_frags, moved_len = 0;
-+	u64 page_start;
-+	struct page *page;
-+	skb_frag_t *frag;
-+	int i = 0, j = 0;
-+
-+	/* make sure skb is not shared */
-+	skb = skb_share_check(skb, GFP_ATOMIC);
-+	if (!skb)
-+		return NULL;
-+
-+	nr_frags = skb_shinfo(skb)->nr_frags;
-+	page_start = (u64)skb->data;
-+
-+	/* split the linear part at the first 4k boundary and create one (big)
-+	 * fragment with the rest
-+	 */
-+	if (HAS_DMA_ISSUE(skb->data, skb_headlen(skb))) {
-+		/* we'll add one more frag, make sure there's room */
-+		if (nr_frags + 1 > DPA_SGT_MAX_ENTRIES)
-+			return NULL;
-+
-+		/* next page boundary */
-+		page_start = (page_start + 0x1000) & ~0xFFF;
-+		page = virt_to_page(page_start);
-+
-+		/* move the rest of fragments to make room for a new one at j */
-+		for (i = nr_frags - 1; i >= j;  i--)
-+			skb_shinfo(skb)->frags[i + 1] = skb_shinfo(skb)->frags[i];
-+
-+		/* move length bytes to a paged fragment at j */
-+		length = min((u64)0x1000,
-+			     (u64)skb->data + skb_headlen(skb) - page_start);
-+		skb->data_len += length;
-+		moved_len += length;
-+		skb_fill_page_desc(skb, j++, page, 0, length);
-+		get_page(page);
-+		skb_shinfo(skb)->nr_frags = ++nr_frags;
-+	}
-+	/* adjust the tail pointer */
-+	skb->tail -= moved_len;
-+	j = 0;
-+
-+	/* split any paged fragment that crosses a 4K boundary */
-+	while (j < nr_frags) {
-+		frag = &skb_shinfo(skb)->frags[j];
-+
-+		/* if there is a 4K boundary between the fragment's offset and end */
-+		if (HAS_DMA_ISSUE(frag->page_offset, frag->size)) {
-+			/* we'll add one more frag, make sure there's room */
-+			if (nr_frags + 1 > DPA_SGT_MAX_ENTRIES)
-+				return NULL;
-+
-+			/* new page boundary */
-+			page_start = (u64)page_address(skb_frag_page(frag)) +
-+						  frag->page_offset + 0x1000;
-+			page_start = (u64)page_start & ~0xFFF;
-+			page = virt_to_page(page_start);
-+
-+			/* move the rest of fragments to make room for a new one at j+1 */
-+			for (i = nr_frags - 1; i > j;  i--)
-+				skb_shinfo(skb)->frags[i + 1] =
-+						skb_shinfo(skb)->frags[i];
-+
-+			/* move length bytes to a new paged fragment at j+1 */
-+			length = (u64)page_address(skb_frag_page(frag)) +
-+				 frag->page_offset + frag->size - page_start;
-+			frag->size -= length;
-+			skb_fill_page_desc(skb, j + 1, page, 0, length);
-+			get_page(page);
-+			skb_shinfo(skb)->nr_frags = ++nr_frags;
-+		}
-+
-+		/* move to next frag */
-+		j++;
-+	}
-+
-+	return skb;
-+}
-+#endif
-+
-+int __hot skb_to_sg_fd(struct dpa_priv_s *priv,
-+		       struct sk_buff *skb, struct qm_fd *fd)
-+{
-+	struct dpa_bp *dpa_bp = priv->dpa_bp;
-+	dma_addr_t addr;
-+	dma_addr_t sg_addr;
-+	struct sk_buff **skbh;
-+	struct net_device *net_dev = priv->net_dev;
-+	int sg_len, sgt_size;
-+	int err;
-+
-+	struct qm_sg_entry *sgt;
-+	void *sgt_buf;
-+	skb_frag_t *frag;
-+	int i = 0, j = 0;
-+	int nr_frags;
-+	const enum dma_data_direction dma_dir = DMA_TO_DEVICE;
-+
-+	nr_frags = skb_shinfo(skb)->nr_frags;
-+	fd->format = qm_fd_sg;
-+
-+	sgt_size = sizeof(struct qm_sg_entry) * (1 + nr_frags);
-+
-+	/* Get a page frag to store the SGTable, or a full page if the errata
-+	 * is in place and we need to avoid crossing a 4k boundary.
-+	 */
-+#ifndef CONFIG_PPC
-+	if (unlikely(dpaa_errata_a010022))
-+		sgt_buf = page_address(alloc_page(GFP_ATOMIC));
-+	else
-+#endif
-+		sgt_buf = netdev_alloc_frag(priv->tx_headroom + sgt_size);
-+	if (unlikely(!sgt_buf)) {
-+		dev_err(dpa_bp->dev, "netdev_alloc_frag() failed\n");
-+		return -ENOMEM;
-+	}
-+
-+	/* it seems that the memory allocator does not zero the allocated mem */
-+	memset(sgt_buf, 0, priv->tx_headroom + sgt_size);
-+
-+	/* Enable L3/L4 hardware checksum computation.
-+	 *
-+	 * We must do this before dma_map_single(DMA_TO_DEVICE), because we may
-+	 * need to write into the skb.
-+	 */
-+	err = dpa_enable_tx_csum(priv, skb, fd,
-+				 sgt_buf + DPA_TX_PRIV_DATA_SIZE);
-+	if (unlikely(err < 0)) {
-+		if (netif_msg_tx_err(priv) && net_ratelimit())
-+			netdev_err(net_dev, "HW csum error: %d\n", err);
-+		goto csum_failed;
-+	}
-+
-+	/* Assign the data from skb->data to the first SG list entry */
-+	sgt = (struct qm_sg_entry *)(sgt_buf + priv->tx_headroom);
-+	sg_len = skb_headlen(skb);
-+	qm_sg_entry_set_bpid(&sgt[0], 0xff);
-+	qm_sg_entry_set_offset(&sgt[0], 0);
-+	qm_sg_entry_set_len(&sgt[0], sg_len);
-+	qm_sg_entry_set_ext(&sgt[0], 0);
-+	qm_sg_entry_set_final(&sgt[0], 0);
-+
-+	addr = dma_map_single(dpa_bp->dev, skb->data, sg_len, dma_dir);
-+	if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
-+		dev_err(dpa_bp->dev, "DMA mapping failed");
-+		err = -EINVAL;
-+		goto sg0_map_failed;
-+	}
-+
-+	qm_sg_entry_set64(&sgt[0], addr);
-+
-+	/* populate the rest of SGT entries */
-+	for (i = 1; i <= nr_frags; i++) {
-+		frag = &skb_shinfo(skb)->frags[i - 1];
-+		qm_sg_entry_set_bpid(&sgt[i], 0xff);
-+		qm_sg_entry_set_offset(&sgt[i], 0);
-+		qm_sg_entry_set_len(&sgt[i], frag->size);
-+		qm_sg_entry_set_ext(&sgt[i], 0);
-+
-+		if (i == nr_frags)
-+			qm_sg_entry_set_final(&sgt[i], 1);
-+		else
-+			qm_sg_entry_set_final(&sgt[i], 0);
-+
-+		DPA_BUG_ON(!skb_frag_page(frag));
-+		addr = skb_frag_dma_map(dpa_bp->dev, frag, 0, frag->size,
-+					dma_dir);
-+		if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
-+			dev_err(dpa_bp->dev, "DMA mapping failed");
-+			err = -EINVAL;
-+			goto sg_map_failed;
-+		}
-+
-+		/* keep the offset in the address */
-+		qm_sg_entry_set64(&sgt[i], addr);
-+	}
-+
-+	fd->length20 = skb->len;
-+	fd->offset = priv->tx_headroom;
-+
-+	/* DMA map the SGT page */
-+	DPA_WRITE_SKB_PTR(skb, skbh, sgt_buf, 0);
-+	addr = dma_map_single(dpa_bp->dev, sgt_buf,
-+			      priv->tx_headroom + sgt_size,
-+			      dma_dir);
-+
-+	if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
-+		dev_err(dpa_bp->dev, "DMA mapping failed");
-+		err = -EINVAL;
-+		goto sgt_map_failed;
-+	}
-+
-+	qm_fd_addr_set64(fd, addr);
-+	fd->bpid = 0xff;
-+	fd->cmd |= FM_FD_CMD_FCO;
-+
-+	return 0;
-+
-+sgt_map_failed:
-+sg_map_failed:
-+	for (j = 0; j < i; j++) {
-+		sg_addr = qm_sg_addr(&sgt[j]);
-+		dma_unmap_page(dpa_bp->dev, sg_addr,
-+			       qm_sg_entry_get_len(&sgt[j]), dma_dir);
-+	}
-+sg0_map_failed:
-+csum_failed:
-+	put_page(virt_to_head_page(sgt_buf));
-+
-+	return err;
-+}
-+EXPORT_SYMBOL(skb_to_sg_fd);
-+
-+int __hot dpa_tx(struct sk_buff *skb, struct net_device *net_dev)
-+{
-+	struct dpa_priv_s	*priv;
-+	const int queue_mapping = dpa_get_queue_mapping(skb);
-+	struct qman_fq *egress_fq, *conf_fq;
-+
-+#ifdef CONFIG_FSL_DPAA_HOOKS
-+	/* If there is a Tx hook, run it. */
-+	if (dpaa_eth_hooks.tx &&
-+		dpaa_eth_hooks.tx(skb, net_dev) == DPAA_ETH_STOLEN)
-+		/* won't update any Tx stats */
-+		return NETDEV_TX_OK;
-+#endif
-+
-+	priv = netdev_priv(net_dev);
-+
-+#ifdef CONFIG_FSL_DPAA_CEETM
-+	if (priv->ceetm_en)
-+		return ceetm_tx(skb, net_dev);
-+#endif
-+
-+	egress_fq = priv->egress_fqs[queue_mapping];
-+	conf_fq = priv->conf_fqs[queue_mapping];
-+
-+	return dpa_tx_extended(skb, net_dev, egress_fq, conf_fq);
-+}
-+
-+int __hot dpa_tx_extended(struct sk_buff *skb, struct net_device *net_dev,
-+		struct qman_fq *egress_fq, struct qman_fq *conf_fq)
-+{
-+	struct dpa_priv_s	*priv;
-+	struct qm_fd		 fd;
-+	struct dpa_percpu_priv_s *percpu_priv;
-+	struct rtnl_link_stats64 *percpu_stats;
-+	int err = 0;
-+	const bool nonlinear = skb_is_nonlinear(skb);
-+	int *countptr, offset = 0;
-+
-+	priv = netdev_priv(net_dev);
-+	/* Non-migratable context, safe to use raw_cpu_ptr */
-+	percpu_priv = raw_cpu_ptr(priv->percpu_priv);
-+	percpu_stats = &percpu_priv->stats;
-+	countptr = raw_cpu_ptr(priv->dpa_bp->percpu_count);
-+
-+	clear_fd(&fd);
-+
-+#ifdef CONFIG_FSL_DPAA_1588
-+	if (priv->tsu && priv->tsu->valid && priv->tsu->hwts_tx_en_ioctl)
-+		fd.cmd |= FM_FD_CMD_UPD;
-+#endif
-+#ifdef CONFIG_FSL_DPAA_TS
-+	if (unlikely(priv->ts_tx_en &&
-+			skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))
-+		fd.cmd |= FM_FD_CMD_UPD;
-+	skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
-+#endif /* CONFIG_FSL_DPAA_TS */
-+
-+#ifndef CONFIG_PPC
-+	if (unlikely(dpaa_errata_a010022)) {
-+		skb = split_skb_at_4k_boundaries(skb);
-+		if (!skb)
-+			goto skb_to_fd_failed;
-+	}
-+#endif
-+
-+	/* MAX_SKB_FRAGS is larger than our DPA_SGT_MAX_ENTRIES; make sure
-+	 * we don't feed FMan with more fragments than it supports.
-+	 * Btw, we're using the first sgt entry to store the linear part of
-+	 * the skb, so we're one extra frag short.
-+	 */
-+	if (nonlinear &&
-+		likely(skb_shinfo(skb)->nr_frags < DPA_SGT_MAX_ENTRIES)) {
-+		/* Just create a S/G fd based on the skb */
-+		err = skb_to_sg_fd(priv, skb, &fd);
-+		percpu_priv->tx_frag_skbuffs++;
-+	} else {
-+		/* Make sure we have enough headroom to accommodate private
-+		 * data, parse results, etc. Normally this shouldn't happen if
-+		 * we're here via the standard kernel stack.
-+		 */
-+		if (unlikely(skb_headroom(skb) < priv->tx_headroom)) {
-+			struct sk_buff *skb_new;
-+
-+			skb_new = skb_realloc_headroom(skb, priv->tx_headroom);
-+			if (unlikely(!skb_new)) {
-+				dev_kfree_skb(skb);
-+				percpu_stats->tx_errors++;
-+				return NETDEV_TX_OK;
-+			}
-+			dev_kfree_skb(skb);
-+			skb = skb_new;
-+		}
-+
-+		/* We're going to store the skb backpointer at the beginning
-+		 * of the data buffer, so we need a privately owned skb
-+		 */
-+
-+		/* Code borrowed from skb_unshare(). */
-+		if (skb_cloned(skb)) {
-+			struct sk_buff *nskb = skb_copy(skb, GFP_ATOMIC);
-+			kfree_skb(skb);
-+			skb = nskb;
-+			/* skb_copy() has now linearized the skbuff. */
-+		} else if (unlikely(nonlinear)) {
-+			/* We are here because the egress skb contains
-+			 * more fragments than we support. In this case,
-+			 * we have no choice but to linearize it ourselves.
-+			 */
-+			err = __skb_linearize(skb);
-+		}
-+		if (unlikely(!skb || err < 0))
-+			/* Common out-of-memory error path */
-+			goto enomem;
-+
-+		err = skb_to_contig_fd(priv, skb, &fd, countptr, &offset);
-+	}
-+	if (unlikely(err < 0))
-+		goto skb_to_fd_failed;
-+
-+	if (fd.bpid != 0xff) {
-+		skb_recycle(skb);
-+		/* skb_recycle() reserves NET_SKB_PAD as skb headroom,
-+		 * but we need the skb to look as if returned by build_skb().
-+		 * We need to manually adjust the tailptr as well.
-+		 */
-+		skb->data = skb->head + offset;
-+		skb_reset_tail_pointer(skb);
-+
-+		(*countptr)++;
-+		percpu_priv->tx_returned++;
-+	}
-+
-+	if (unlikely(dpa_xmit(priv, percpu_stats, &fd, egress_fq, conf_fq) < 0))
-+		goto xmit_failed;
-+
-+	return NETDEV_TX_OK;
-+
-+xmit_failed:
-+	if (fd.bpid != 0xff) {
-+		(*countptr)--;
-+		percpu_priv->tx_returned--;
-+		dpa_fd_release(net_dev, &fd);
-+		percpu_stats->tx_errors++;
-+		return NETDEV_TX_OK;
-+	}
-+	_dpa_cleanup_tx_fd(priv, &fd);
-+skb_to_fd_failed:
-+enomem:
-+	percpu_stats->tx_errors++;
-+	dev_kfree_skb(skb);
-+	return NETDEV_TX_OK;
-+}
-+EXPORT_SYMBOL(dpa_tx_extended);
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sysfs.c
-@@ -0,0 +1,278 @@
-+/* Copyright 2008-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kthread.h>
-+#include <linux/io.h>
-+#include <linux/of_net.h>
-+#include "dpaa_eth.h"
-+#include "mac.h"		/* struct mac_device */
-+#ifdef CONFIG_FSL_DPAA_1588
-+#include "dpaa_1588.h"
-+#endif
-+
-+static ssize_t dpaa_eth_show_addr(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	struct mac_device *mac_dev = priv->mac_dev;
-+
-+	if (mac_dev)
-+		return sprintf(buf, "%llx",
-+				(unsigned long long)mac_dev->res->start);
-+	else
-+		return sprintf(buf, "none");
-+}
-+
-+static ssize_t dpaa_eth_show_type(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	ssize_t res = 0;
-+
-+	if (priv)
-+		res = sprintf(buf, "%s", priv->if_type);
-+
-+	return res;
-+}
-+
-+static ssize_t dpaa_eth_show_fqids(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	ssize_t bytes = 0;
-+	int i = 0;
-+	char *str;
-+	struct dpa_fq *fq;
-+	struct dpa_fq *tmp;
-+	struct dpa_fq *prev = NULL;
-+	u32 first_fqid = 0;
-+	u32 last_fqid = 0;
-+	char *prevstr = NULL;
-+
-+	list_for_each_entry_safe(fq, tmp, &priv->dpa_fq_list, list) {
-+		switch (fq->fq_type) {
-+		case FQ_TYPE_RX_DEFAULT:
-+			str = "Rx default";
-+			break;
-+		case FQ_TYPE_RX_ERROR:
-+			str = "Rx error";
-+			break;
-+		case FQ_TYPE_RX_PCD:
-+			str = "Rx PCD";
-+			break;
-+		case FQ_TYPE_TX_CONFIRM:
-+			str = "Tx default confirmation";
-+			break;
-+		case FQ_TYPE_TX_CONF_MQ:
-+			str = "Tx confirmation (mq)";
-+			break;
-+		case FQ_TYPE_TX_ERROR:
-+			str = "Tx error";
-+			break;
-+		case FQ_TYPE_TX:
-+			str = "Tx";
-+			break;
-+		case FQ_TYPE_RX_PCD_HI_PRIO:
-+			str ="Rx PCD High Priority";
-+			break;
-+		default:
-+			str = "Unknown";
-+		}
-+
-+		if (prev && (abs(fq->fqid - prev->fqid) != 1 ||
-+					str != prevstr)) {
-+			if (last_fqid == first_fqid)
-+				bytes += sprintf(buf + bytes,
-+					"%s: %d\n", prevstr, prev->fqid);
-+			else
-+				bytes += sprintf(buf + bytes,
-+					"%s: %d - %d\n", prevstr,
-+					first_fqid, last_fqid);
-+		}
-+
-+		if (prev && abs(fq->fqid - prev->fqid) == 1 && str == prevstr)
-+			last_fqid = fq->fqid;
-+		else
-+			first_fqid = last_fqid = fq->fqid;
-+
-+		prev = fq;
-+		prevstr = str;
-+		i++;
-+	}
-+
-+	if (prev) {
-+		if (last_fqid == first_fqid)
-+			bytes += sprintf(buf + bytes, "%s: %d\n", prevstr,
-+					prev->fqid);
-+		else
-+			bytes += sprintf(buf + bytes, "%s: %d - %d\n", prevstr,
-+					first_fqid, last_fqid);
-+	}
-+
-+	return bytes;
-+}
-+
-+static ssize_t dpaa_eth_show_bpids(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	ssize_t bytes = 0;
-+	struct dpa_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	struct dpa_bp *dpa_bp = priv->dpa_bp;
-+	int i = 0;
-+
-+	for (i = 0; i < priv->bp_count; i++)
-+		bytes += snprintf(buf + bytes, PAGE_SIZE, "%u\n",
-+				dpa_bp[i].bpid);
-+
-+	return bytes;
-+}
-+
-+static ssize_t dpaa_eth_show_mac_regs(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	struct mac_device *mac_dev = priv->mac_dev;
-+	int n = 0;
-+
-+	if (mac_dev)
-+		n = fm_mac_dump_regs(mac_dev, buf, n);
-+	else
-+		return sprintf(buf, "no mac registers\n");
-+
-+	return n;
-+}
-+
-+static ssize_t dpaa_eth_show_mac_rx_stats(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	struct mac_device *mac_dev = priv->mac_dev;
-+	int n = 0;
-+
-+	if (mac_dev)
-+		n = fm_mac_dump_rx_stats(mac_dev, buf, n);
-+	else
-+		return sprintf(buf, "no mac rx stats\n");
-+
-+	return n;
-+}
-+
-+static ssize_t dpaa_eth_show_mac_tx_stats(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	struct mac_device *mac_dev = priv->mac_dev;
-+	int n = 0;
-+
-+	if (mac_dev)
-+		n = fm_mac_dump_tx_stats(mac_dev, buf, n);
-+	else
-+		return sprintf(buf, "no mac tx stats\n");
-+
-+	return n;
-+}
-+
-+#ifdef CONFIG_FSL_DPAA_1588
-+static ssize_t dpaa_eth_show_ptp_1588(struct device *dev,
-+			struct device_attribute *attr, char *buf)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(to_net_dev(dev));
-+
-+	if (priv->tsu && priv->tsu->valid)
-+		return sprintf(buf, "1\n");
-+	else
-+		return sprintf(buf, "0\n");
-+}
-+
-+static ssize_t dpaa_eth_set_ptp_1588(struct device *dev,
-+					struct device_attribute *attr,
-+					const char *buf, size_t count)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	unsigned int num;
-+	unsigned long flags;
-+
-+	if (kstrtouint(buf, 0, &num) < 0)
-+		return -EINVAL;
-+
-+	local_irq_save(flags);
-+
-+	if (num) {
-+		if (priv->tsu)
-+			priv->tsu->valid = TRUE;
-+	} else {
-+		if (priv->tsu)
-+			priv->tsu->valid = FALSE;
-+	}
-+
-+	local_irq_restore(flags);
-+
-+	return count;
-+}
-+#endif
-+
-+static struct device_attribute dpaa_eth_attrs[] = {
-+	__ATTR(device_addr, S_IRUGO, dpaa_eth_show_addr, NULL),
-+	__ATTR(device_type, S_IRUGO, dpaa_eth_show_type, NULL),
-+	__ATTR(fqids, S_IRUGO, dpaa_eth_show_fqids, NULL),
-+	__ATTR(bpids, S_IRUGO, dpaa_eth_show_bpids, NULL),
-+	__ATTR(mac_regs, S_IRUGO, dpaa_eth_show_mac_regs, NULL),
-+	__ATTR(mac_rx_stats, S_IRUGO, dpaa_eth_show_mac_rx_stats, NULL),
-+	__ATTR(mac_tx_stats, S_IRUGO, dpaa_eth_show_mac_tx_stats, NULL),
-+#ifdef CONFIG_FSL_DPAA_1588
-+	__ATTR(ptp_1588, S_IRUGO | S_IWUSR, dpaa_eth_show_ptp_1588,
-+					dpaa_eth_set_ptp_1588),
-+#endif
-+};
-+
-+void dpaa_eth_sysfs_init(struct device *dev)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(dpaa_eth_attrs); i++)
-+		if (device_create_file(dev, &dpaa_eth_attrs[i])) {
-+			dev_err(dev, "Error creating sysfs file\n");
-+			while (i > 0)
-+				device_remove_file(dev, &dpaa_eth_attrs[--i]);
-+			return;
-+		}
-+}
-+EXPORT_SYMBOL(dpaa_eth_sysfs_init);
-+
-+void dpaa_eth_sysfs_remove(struct device *dev)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(dpaa_eth_attrs); i++)
-+		device_remove_file(dev, &dpaa_eth_attrs[i]);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_trace.h
-@@ -0,0 +1,144 @@
-+/* Copyright 2013 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#undef TRACE_SYSTEM
-+#define TRACE_SYSTEM	dpaa_eth
-+
-+#if !defined(_DPAA_ETH_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
-+#define _DPAA_ETH_TRACE_H
-+
-+#include <linux/skbuff.h>
-+#include <linux/netdevice.h>
-+#include "dpaa_eth.h"
-+#include <linux/tracepoint.h>
-+
-+#define fd_format_name(format)	{ qm_fd_##format, #format }
-+#define fd_format_list	\
-+	fd_format_name(contig),	\
-+	fd_format_name(sg)
-+#define TR_FMT "[%s] fqid=%d, fd: addr=0x%llx, format=%s, off=%u, len=%u," \
-+	" status=0x%08x"
-+
-+/* This is used to declare a class of events.
-+ * individual events of this type will be defined below.
-+ */
-+
-+/* Store details about a frame descriptor and the FQ on which it was
-+ * transmitted/received.
-+ */
-+DECLARE_EVENT_CLASS(dpaa_eth_fd,
-+	/* Trace function prototype */
-+	TP_PROTO(struct net_device *netdev,
-+		 struct qman_fq *fq,
-+		 const struct qm_fd *fd),
-+
-+	/* Repeat argument list here */
-+	TP_ARGS(netdev, fq, fd),
-+
-+	/* A structure containing the relevant information we want to record.
-+	 * Declare name and type for each normal element, name, type and size
-+	 * for arrays. Use __string for variable length strings.
-+	 */
-+	TP_STRUCT__entry(
-+		__field(u32,	fqid)
-+		__field(u64,	fd_addr)
-+		__field(u8,	fd_format)
-+		__field(u16,	fd_offset)
-+		__field(u32,	fd_length)
-+		__field(u32,	fd_status)
-+		__string(name,	netdev->name)
-+	),
-+
-+	/* The function that assigns values to the above declared fields */
-+	TP_fast_assign(
-+		__entry->fqid = fq->fqid;
-+		__entry->fd_addr = qm_fd_addr_get64(fd);
-+		__entry->fd_format = fd->format;
-+		__entry->fd_offset = dpa_fd_offset(fd);
-+		__entry->fd_length = dpa_fd_length(fd);
-+		__entry->fd_status = fd->status;
-+		__assign_str(name, netdev->name);
-+	),
-+
-+	/* This is what gets printed when the trace event is triggered */
-+	/* TODO: print the status using __print_flags() */
-+	TP_printk(TR_FMT,
-+		  __get_str(name), __entry->fqid, __entry->fd_addr,
-+		  __print_symbolic(__entry->fd_format, fd_format_list),
-+		  __entry->fd_offset, __entry->fd_length, __entry->fd_status)
-+);
-+
-+/* Now declare events of the above type. Format is:
-+ * DEFINE_EVENT(class, name, proto, args), with proto and args same as for class
-+ */
-+
-+/* Tx (egress) fd */
-+DEFINE_EVENT(dpaa_eth_fd, dpa_tx_fd,
-+
-+	TP_PROTO(struct net_device *netdev,
-+		 struct qman_fq *fq,
-+		 const struct qm_fd *fd),
-+
-+	TP_ARGS(netdev, fq, fd)
-+);
-+
-+/* Rx fd */
-+DEFINE_EVENT(dpaa_eth_fd, dpa_rx_fd,
-+
-+	TP_PROTO(struct net_device *netdev,
-+		 struct qman_fq *fq,
-+		 const struct qm_fd *fd),
-+
-+	TP_ARGS(netdev, fq, fd)
-+);
-+
-+/* Tx confirmation fd */
-+DEFINE_EVENT(dpaa_eth_fd, dpa_tx_conf_fd,
-+
-+	TP_PROTO(struct net_device *netdev,
-+		 struct qman_fq *fq,
-+		 const struct qm_fd *fd),
-+
-+	TP_ARGS(netdev, fq, fd)
-+);
-+
-+/* If only one event of a certain type needs to be declared, use TRACE_EVENT().
-+ * The syntax is the same as for DECLARE_EVENT_CLASS().
-+ */
-+
-+#endif /* _DPAA_ETH_TRACE_H */
-+
-+/* This must be outside ifdef _DPAA_ETH_TRACE_H */
-+#undef TRACE_INCLUDE_PATH
-+#define TRACE_INCLUDE_PATH .
-+#undef TRACE_INCLUDE_FILE
-+#define TRACE_INCLUDE_FILE	dpaa_eth_trace
-+#include <trace/define_trace.h>
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c
-@@ -0,0 +1,544 @@
-+/* Copyright 2008-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifdef CONFIG_FSL_DPAA_ETH_DEBUG
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": %s:%hu:%s() " fmt, \
-+	KBUILD_BASENAME".c", __LINE__, __func__
-+#else
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": " fmt
-+#endif
-+
-+#include <linux/string.h>
-+
-+#include "dpaa_eth.h"
-+#include "mac.h"                /* struct mac_device */
-+#include "dpaa_eth_common.h"
-+
-+static const char dpa_stats_percpu[][ETH_GSTRING_LEN] = {
-+	"interrupts",
-+	"rx packets",
-+	"tx packets",
-+	"tx recycled",
-+	"tx confirm",
-+	"tx S/G",
-+	"rx S/G",
-+	"tx error",
-+	"rx error",
-+	"bp count"
-+};
-+
-+static char dpa_stats_global[][ETH_GSTRING_LEN] = {
-+	/* dpa rx errors */
-+	"rx dma error",
-+	"rx frame physical error",
-+	"rx frame size error",
-+	"rx header error",
-+	"rx csum error",
-+
-+	/* demultiplexing errors */
-+	"qman cg_tdrop",
-+	"qman wred",
-+	"qman error cond",
-+	"qman early window",
-+	"qman late window",
-+	"qman fq tdrop",
-+	"qman fq retired",
-+	"qman orp disabled",
-+
-+	/* congestion related stats */
-+	"congestion time (ms)",
-+	"entered congestion",
-+	"congested (0/1)"
-+};
-+
-+#define DPA_STATS_PERCPU_LEN ARRAY_SIZE(dpa_stats_percpu)
-+#define DPA_STATS_GLOBAL_LEN ARRAY_SIZE(dpa_stats_global)
-+
-+static int __cold dpa_get_settings(struct net_device *net_dev,
-+		struct ethtool_cmd *et_cmd)
-+{
-+	int			 _errno;
-+	struct dpa_priv_s	*priv;
-+
-+	priv = netdev_priv(net_dev);
-+
-+	if (priv->mac_dev == NULL) {
-+		netdev_info(net_dev, "This is a MAC-less interface\n");
-+		return -ENODEV;
-+	}
-+	if (unlikely(priv->mac_dev->phy_dev == NULL)) {
-+		netdev_dbg(net_dev, "phy device not initialized\n");
-+		return 0;
-+	}
-+
-+	_errno = phy_ethtool_gset(priv->mac_dev->phy_dev, et_cmd);
-+	if (unlikely(_errno < 0))
-+		netdev_err(net_dev, "phy_ethtool_gset() = %d\n", _errno);
-+
-+	return _errno;
-+}
-+
-+static int __cold dpa_set_settings(struct net_device *net_dev,
-+		struct ethtool_cmd *et_cmd)
-+{
-+	int			 _errno;
-+	struct dpa_priv_s	*priv;
-+
-+	priv = netdev_priv(net_dev);
-+
-+	if (priv->mac_dev == NULL) {
-+		netdev_info(net_dev, "This is a MAC-less interface\n");
-+		return -ENODEV;
-+	}
-+	if (unlikely(priv->mac_dev->phy_dev == NULL)) {
-+		netdev_err(net_dev, "phy device not initialized\n");
-+		return -ENODEV;
-+	}
-+
-+	_errno = phy_ethtool_sset(priv->mac_dev->phy_dev, et_cmd);
-+	if (unlikely(_errno < 0))
-+		netdev_err(net_dev, "phy_ethtool_sset() = %d\n", _errno);
-+
-+	return _errno;
-+}
-+
-+static void __cold dpa_get_drvinfo(struct net_device *net_dev,
-+		struct ethtool_drvinfo *drvinfo)
-+{
-+	int		 _errno;
-+
-+	strncpy(drvinfo->driver, KBUILD_MODNAME,
-+		sizeof(drvinfo->driver) - 1)[sizeof(drvinfo->driver)-1] = 0;
-+	_errno = snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
-+			  "%X", 0);
-+
-+	if (unlikely(_errno >= sizeof(drvinfo->fw_version))) {
-+		/* Truncated output */
-+		netdev_notice(net_dev, "snprintf() = %d\n", _errno);
-+	} else if (unlikely(_errno < 0)) {
-+		netdev_warn(net_dev, "snprintf() = %d\n", _errno);
-+		memset(drvinfo->fw_version, 0, sizeof(drvinfo->fw_version));
-+	}
-+	strncpy(drvinfo->bus_info, dev_name(net_dev->dev.parent->parent),
-+		sizeof(drvinfo->bus_info)-1)[sizeof(drvinfo->bus_info)-1] = 0;
-+}
-+
-+static uint32_t __cold dpa_get_msglevel(struct net_device *net_dev)
-+{
-+	return ((struct dpa_priv_s *)netdev_priv(net_dev))->msg_enable;
-+}
-+
-+static void __cold dpa_set_msglevel(struct net_device *net_dev,
-+		uint32_t msg_enable)
-+{
-+	((struct dpa_priv_s *)netdev_priv(net_dev))->msg_enable = msg_enable;
-+}
-+
-+static int __cold dpa_nway_reset(struct net_device *net_dev)
-+{
-+	int			 _errno;
-+	struct dpa_priv_s	*priv;
-+
-+	priv = netdev_priv(net_dev);
-+
-+	if (priv->mac_dev == NULL) {
-+		netdev_info(net_dev, "This is a MAC-less interface\n");
-+		return -ENODEV;
-+	}
-+	if (unlikely(priv->mac_dev->phy_dev == NULL)) {
-+		netdev_err(net_dev, "phy device not initialized\n");
-+		return -ENODEV;
-+	}
-+
-+	_errno = 0;
-+	if (priv->mac_dev->phy_dev->autoneg) {
-+		_errno = phy_start_aneg(priv->mac_dev->phy_dev);
-+		if (unlikely(_errno < 0))
-+			netdev_err(net_dev, "phy_start_aneg() = %d\n",
-+					_errno);
-+	}
-+
-+	return _errno;
-+}
-+
-+static void __cold dpa_get_pauseparam(struct net_device *net_dev,
-+		struct ethtool_pauseparam *epause)
-+{
-+	struct dpa_priv_s	*priv;
-+	struct mac_device       *mac_dev;
-+	struct phy_device       *phy_dev;
-+
-+	priv = netdev_priv(net_dev);
-+	mac_dev = priv->mac_dev;
-+
-+	if (mac_dev == NULL) {
-+		netdev_info(net_dev, "This is a MAC-less interface\n");
-+		return;
-+	}
-+
-+	phy_dev = mac_dev->phy_dev;
-+	if (unlikely(phy_dev == NULL)) {
-+		netdev_err(net_dev, "phy device not initialized\n");
-+		return;
-+	}
-+
-+	epause->autoneg = mac_dev->autoneg_pause;
-+	epause->rx_pause = mac_dev->rx_pause_active;
-+	epause->tx_pause = mac_dev->tx_pause_active;
-+}
-+
-+static int __cold dpa_set_pauseparam(struct net_device *net_dev,
-+		struct ethtool_pauseparam *epause)
-+{
-+	struct dpa_priv_s	*priv;
-+	struct mac_device       *mac_dev;
-+	struct phy_device       *phy_dev;
-+	int _errno;
-+	u32 newadv, oldadv;
-+	bool rx_pause, tx_pause;
-+
-+	priv = netdev_priv(net_dev);
-+	mac_dev = priv->mac_dev;
-+
-+	if (mac_dev == NULL) {
-+		netdev_info(net_dev, "This is a MAC-less interface\n");
-+		return -ENODEV;
-+	}
-+
-+	phy_dev = mac_dev->phy_dev;
-+	if (unlikely(phy_dev == NULL)) {
-+		netdev_err(net_dev, "phy device not initialized\n");
-+		return -ENODEV;
-+	}
-+
-+	if (!(phy_dev->supported & SUPPORTED_Pause) ||
-+			(!(phy_dev->supported & SUPPORTED_Asym_Pause) &&
-+			(epause->rx_pause != epause->tx_pause)))
-+		return -EINVAL;
-+
-+	/* The MAC should know how to handle PAUSE frame autonegotiation before
-+	 * adjust_link is triggered by a forced renegotiation of sym/asym PAUSE
-+	 * settings.
-+	 */
-+	mac_dev->autoneg_pause = !!epause->autoneg;
-+	mac_dev->rx_pause_req = !!epause->rx_pause;
-+	mac_dev->tx_pause_req = !!epause->tx_pause;
-+
-+	/* Determine the sym/asym advertised PAUSE capabilities from the desired
-+	 * rx/tx pause settings.
-+	 */
-+	newadv = 0;
-+	if (epause->rx_pause)
-+		newadv = ADVERTISED_Pause | ADVERTISED_Asym_Pause;
-+	if (epause->tx_pause)
-+		newadv |= ADVERTISED_Asym_Pause;
-+
-+	oldadv = phy_dev->advertising &
-+			(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
-+
-+	/* If there are differences between the old and the new advertised
-+	 * values, restart PHY autonegotiation and advertise the new values.
-+	 */
-+	if (oldadv != newadv) {
-+		phy_dev->advertising &= ~(ADVERTISED_Pause
-+				| ADVERTISED_Asym_Pause);
-+		phy_dev->advertising |= newadv;
-+		if (phy_dev->autoneg) {
-+			_errno = phy_start_aneg(phy_dev);
-+			if (unlikely(_errno < 0))
-+				netdev_err(net_dev, "phy_start_aneg() = %d\n",
-+						_errno);
-+		}
-+	}
-+
-+	get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
-+	_errno = set_mac_active_pause(mac_dev, rx_pause, tx_pause);
-+	if (unlikely(_errno < 0))
-+		netdev_err(net_dev, "set_mac_active_pause() = %d\n", _errno);
-+
-+	return _errno;
-+}
-+
-+#ifdef CONFIG_PM
-+static void dpa_get_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(net_dev);
-+
-+	wol->supported = 0;
-+	wol->wolopts = 0;
-+
-+	if (!priv->wol || !device_can_wakeup(net_dev->dev.parent))
-+		return;
-+
-+	if (priv->wol & DPAA_WOL_MAGIC) {
-+		wol->supported = WAKE_MAGIC;
-+		wol->wolopts = WAKE_MAGIC;
-+	}
-+}
-+
-+static int dpa_set_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(net_dev);
-+
-+	if (priv->mac_dev == NULL) {
-+		netdev_info(net_dev, "This is a MAC-less interface\n");
-+		return -ENODEV;
-+	}
-+
-+	if (unlikely(priv->mac_dev->phy_dev == NULL)) {
-+		netdev_dbg(net_dev, "phy device not initialized\n");
-+		return -ENODEV;
-+	}
-+
-+	if (!device_can_wakeup(net_dev->dev.parent) ||
-+		(wol->wolopts & ~WAKE_MAGIC))
-+		return -EOPNOTSUPP;
-+
-+	priv->wol = 0;
-+
-+	if (wol->wolopts & WAKE_MAGIC) {
-+		priv->wol = DPAA_WOL_MAGIC;
-+		device_set_wakeup_enable(net_dev->dev.parent, 1);
-+	} else {
-+		device_set_wakeup_enable(net_dev->dev.parent, 0);
-+	}
-+
-+	return 0;
-+}
-+#endif
-+
-+static int dpa_get_eee(struct net_device *net_dev, struct ethtool_eee *et_eee)
-+{
-+	struct dpa_priv_s *priv;
-+
-+	priv = netdev_priv(net_dev);
-+	if (priv->mac_dev == NULL) {
-+		netdev_info(net_dev, "This is a MAC-less interface\n");
-+		return -ENODEV;
-+	}
-+
-+	if (unlikely(priv->mac_dev->phy_dev == NULL)) {
-+		netdev_err(net_dev, "phy device not initialized\n");
-+		return -ENODEV;
-+	}
-+
-+	return phy_ethtool_get_eee(priv->mac_dev->phy_dev, et_eee);
-+}
-+
-+static int dpa_set_eee(struct net_device *net_dev, struct ethtool_eee *et_eee)
-+{
-+	struct dpa_priv_s *priv;
-+
-+	priv = netdev_priv(net_dev);
-+	if (priv->mac_dev == NULL) {
-+		netdev_info(net_dev, "This is a MAC-less interface\n");
-+		return -ENODEV;
-+	}
-+
-+	if (unlikely(priv->mac_dev->phy_dev == NULL)) {
-+		netdev_err(net_dev, "phy device not initialized\n");
-+		return -ENODEV;
-+	}
-+
-+	return phy_ethtool_set_eee(priv->mac_dev->phy_dev, et_eee);
-+}
-+
-+static int dpa_get_sset_count(struct net_device *net_dev, int type)
-+{
-+	unsigned int total_stats, num_stats;
-+
-+	num_stats   = num_online_cpus() + 1;
-+	total_stats = num_stats * DPA_STATS_PERCPU_LEN + DPA_STATS_GLOBAL_LEN;
-+
-+	switch (type) {
-+	case ETH_SS_STATS:
-+		return total_stats;
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
-+static void copy_stats(struct dpa_percpu_priv_s *percpu_priv, int num_cpus,
-+			int crr_cpu, u64 bp_count, u64 *data)
-+{
-+	int num_stat_values = num_cpus + 1;
-+	int crr_stat = 0;
-+
-+	/* update current CPU's stats and also add them to the total values */
-+	data[crr_stat * num_stat_values + crr_cpu] = percpu_priv->in_interrupt;
-+	data[crr_stat++ * num_stat_values + num_cpus] += percpu_priv->in_interrupt;
-+
-+	data[crr_stat * num_stat_values + crr_cpu] = percpu_priv->stats.rx_packets;
-+	data[crr_stat++ * num_stat_values + num_cpus] += percpu_priv->stats.rx_packets;
-+
-+	data[crr_stat * num_stat_values + crr_cpu] = percpu_priv->stats.tx_packets;
-+	data[crr_stat++ * num_stat_values + num_cpus] += percpu_priv->stats.tx_packets;
-+
-+	data[crr_stat * num_stat_values + crr_cpu] = percpu_priv->tx_returned;
-+	data[crr_stat++ * num_stat_values + num_cpus] += percpu_priv->tx_returned;
-+
-+	data[crr_stat * num_stat_values + crr_cpu] = percpu_priv->tx_confirm;
-+	data[crr_stat++ * num_stat_values + num_cpus] += percpu_priv->tx_confirm;
-+
-+	data[crr_stat * num_stat_values + crr_cpu] = percpu_priv->tx_frag_skbuffs;
-+	data[crr_stat++ * num_stat_values + num_cpus] += percpu_priv->tx_frag_skbuffs;
-+
-+	data[crr_stat * num_stat_values + crr_cpu] = percpu_priv->rx_sg;
-+	data[crr_stat++ * num_stat_values + num_cpus] += percpu_priv->rx_sg;
-+
-+	data[crr_stat * num_stat_values + crr_cpu] = percpu_priv->stats.tx_errors;
-+	data[crr_stat++ * num_stat_values + num_cpus] += percpu_priv->stats.tx_errors;
-+
-+	data[crr_stat * num_stat_values + crr_cpu] = percpu_priv->stats.rx_errors;
-+	data[crr_stat++ * num_stat_values + num_cpus] += percpu_priv->stats.rx_errors;
-+
-+	data[crr_stat * num_stat_values + crr_cpu] = bp_count;
-+	data[crr_stat++ * num_stat_values + num_cpus] += bp_count;
-+}
-+
-+static void dpa_get_ethtool_stats(struct net_device *net_dev,
-+		struct ethtool_stats *stats, u64 *data)
-+{
-+	u64 bp_count, cg_time, cg_num, cg_status;
-+	struct dpa_percpu_priv_s *percpu_priv;
-+	struct qm_mcr_querycgr query_cgr;
-+	struct dpa_rx_errors rx_errors;
-+	struct dpa_ern_cnt ern_cnt;
-+	struct dpa_priv_s *priv;
-+	unsigned int num_cpus, offset;
-+	struct dpa_bp *dpa_bp;
-+	int total_stats, i;
-+
-+	total_stats = dpa_get_sset_count(net_dev, ETH_SS_STATS);
-+	priv     = netdev_priv(net_dev);
-+	dpa_bp   = priv->dpa_bp;
-+	num_cpus = num_online_cpus();
-+	bp_count = 0;
-+
-+	memset(&rx_errors, 0, sizeof(struct dpa_rx_errors));
-+	memset(&ern_cnt, 0, sizeof(struct dpa_ern_cnt));
-+	memset(data, 0, total_stats * sizeof(u64));
-+
-+	for_each_online_cpu(i) {
-+		percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
-+
-+		if (dpa_bp->percpu_count)
-+			bp_count = *(per_cpu_ptr(dpa_bp->percpu_count, i));
-+
-+		rx_errors.dme += percpu_priv->rx_errors.dme;
-+		rx_errors.fpe += percpu_priv->rx_errors.fpe;
-+		rx_errors.fse += percpu_priv->rx_errors.fse;
-+		rx_errors.phe += percpu_priv->rx_errors.phe;
-+		rx_errors.cse += percpu_priv->rx_errors.cse;
-+
-+		ern_cnt.cg_tdrop     += percpu_priv->ern_cnt.cg_tdrop;
-+		ern_cnt.wred         += percpu_priv->ern_cnt.wred;
-+		ern_cnt.err_cond     += percpu_priv->ern_cnt.err_cond;
-+		ern_cnt.early_window += percpu_priv->ern_cnt.early_window;
-+		ern_cnt.late_window  += percpu_priv->ern_cnt.late_window;
-+		ern_cnt.fq_tdrop     += percpu_priv->ern_cnt.fq_tdrop;
-+		ern_cnt.fq_retired   += percpu_priv->ern_cnt.fq_retired;
-+		ern_cnt.orp_zero     += percpu_priv->ern_cnt.orp_zero;
-+
-+		copy_stats(percpu_priv, num_cpus, i, bp_count, data);
-+	}
-+
-+	offset = (num_cpus + 1) * DPA_STATS_PERCPU_LEN;
-+	memcpy(data + offset, &rx_errors, sizeof(struct dpa_rx_errors));
-+
-+	offset += sizeof(struct dpa_rx_errors) / sizeof(u64);
-+	memcpy(data + offset, &ern_cnt, sizeof(struct dpa_ern_cnt));
-+
-+	/* gather congestion related counters */
-+	cg_num    = 0;
-+	cg_status = 0;
-+	cg_time   = jiffies_to_msecs(priv->cgr_data.congested_jiffies);
-+	if (qman_query_cgr(&priv->cgr_data.cgr, &query_cgr) == 0) {
-+		cg_num    = priv->cgr_data.cgr_congested_count;
-+		cg_status = query_cgr.cgr.cs;
-+
-+		/* reset congestion stats (like QMan API does */
-+		priv->cgr_data.congested_jiffies   = 0;
-+		priv->cgr_data.cgr_congested_count = 0;
-+	}
-+
-+	offset += sizeof(struct dpa_ern_cnt) / sizeof(u64);
-+	data[offset++] = cg_time;
-+	data[offset++] = cg_num;
-+	data[offset++] = cg_status;
-+}
-+
-+static void dpa_get_strings(struct net_device *net_dev, u32 stringset, u8 *data)
-+{
-+	unsigned int i, j, num_cpus, size;
-+	char stat_string_cpu[ETH_GSTRING_LEN];
-+	u8 *strings;
-+
-+	strings   = data;
-+	num_cpus  = num_online_cpus();
-+	size      = DPA_STATS_GLOBAL_LEN * ETH_GSTRING_LEN;
-+
-+	for (i = 0; i < DPA_STATS_PERCPU_LEN; i++) {
-+		for (j = 0; j < num_cpus; j++) {
-+			snprintf(stat_string_cpu, ETH_GSTRING_LEN, "%s [CPU %d]", dpa_stats_percpu[i], j);
-+			memcpy(strings, stat_string_cpu, ETH_GSTRING_LEN);
-+			strings += ETH_GSTRING_LEN;
-+		}
-+		snprintf(stat_string_cpu, ETH_GSTRING_LEN, "%s [TOTAL]", dpa_stats_percpu[i]);
-+		memcpy(strings, stat_string_cpu, ETH_GSTRING_LEN);
-+		strings += ETH_GSTRING_LEN;
-+	}
-+	memcpy(strings, dpa_stats_global, size);
-+}
-+
-+const struct ethtool_ops dpa_ethtool_ops = {
-+	.get_settings = dpa_get_settings,
-+	.set_settings = dpa_set_settings,
-+	.get_drvinfo = dpa_get_drvinfo,
-+	.get_msglevel = dpa_get_msglevel,
-+	.set_msglevel = dpa_set_msglevel,
-+	.nway_reset = dpa_nway_reset,
-+	.get_pauseparam = dpa_get_pauseparam,
-+	.set_pauseparam = dpa_set_pauseparam,
-+	.self_test = NULL, /* TODO invoke the cold-boot unit-test? */
-+	.get_link = ethtool_op_get_link,
-+	.get_eee = dpa_get_eee,
-+	.set_eee = dpa_set_eee,
-+	.get_sset_count = dpa_get_sset_count,
-+	.get_ethtool_stats = dpa_get_ethtool_stats,
-+	.get_strings = dpa_get_strings,
-+#ifdef CONFIG_PM
-+	.get_wol = dpa_get_wol,
-+	.set_wol = dpa_set_wol,
-+#endif
-+};
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ptp.c
-@@ -0,0 +1,290 @@
-+/*
-+ * DPAA Ethernet Driver -- PTP 1588 clock using the dTSEC
-+ *
-+ * Author: Yangbo Lu <yangbo.lu@freescale.com>
-+ *
-+ * Copyright 2014 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+*/
-+
-+#include <linux/device.h>
-+#include <linux/hrtimer.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+#include <linux/timex.h>
-+#include <linux/io.h>
-+
-+#include <linux/ptp_clock_kernel.h>
-+
-+#include "dpaa_eth.h"
-+#include "mac.h"
-+
-+struct ptp_clock *clock;
-+
-+static struct mac_device *mac_dev;
-+static u32 freqCompensation;
-+
-+/* Bit definitions for the TMR_CTRL register */
-+#define ALM1P                 (1<<31) /* Alarm1 output polarity */
-+#define ALM2P                 (1<<30) /* Alarm2 output polarity */
-+#define FS                    (1<<28) /* FIPER start indication */
-+#define PP1L                  (1<<27) /* Fiper1 pulse loopback mode enabled. */
-+#define PP2L                  (1<<26) /* Fiper2 pulse loopback mode enabled. */
-+#define TCLK_PERIOD_SHIFT     (16) /* 1588 timer reference clock period. */
-+#define TCLK_PERIOD_MASK      (0x3ff)
-+#define RTPE                  (1<<15) /* Record Tx Timestamp to PAL Enable. */
-+#define FRD                   (1<<14) /* FIPER Realignment Disable */
-+#define ESFDP                 (1<<11) /* External Tx/Rx SFD Polarity. */
-+#define ESFDE                 (1<<10) /* External Tx/Rx SFD Enable. */
-+#define ETEP2                 (1<<9) /* External trigger 2 edge polarity */
-+#define ETEP1                 (1<<8) /* External trigger 1 edge polarity */
-+#define COPH                  (1<<7) /* Generated clock output phase. */
-+#define CIPH                  (1<<6) /* External oscillator input clock phase */
-+#define TMSR                  (1<<5) /* Timer soft reset. */
-+#define BYP                   (1<<3) /* Bypass drift compensated clock */
-+#define TE                    (1<<2) /* 1588 timer enable. */
-+#define CKSEL_SHIFT           (0)    /* 1588 Timer reference clock source */
-+#define CKSEL_MASK            (0x3)
-+
-+/* Bit definitions for the TMR_TEVENT register */
-+#define ETS2                  (1<<25) /* External trigger 2 timestamp sampled */
-+#define ETS1                  (1<<24) /* External trigger 1 timestamp sampled */
-+#define ALM2                  (1<<17) /* Current time = alarm time register 2 */
-+#define ALM1                  (1<<16) /* Current time = alarm time register 1 */
-+#define PP1                   (1<<7)  /* periodic pulse generated on FIPER1 */
-+#define PP2                   (1<<6)  /* periodic pulse generated on FIPER2 */
-+#define PP3                   (1<<5)  /* periodic pulse generated on FIPER3 */
-+
-+/* Bit definitions for the TMR_TEMASK register */
-+#define ETS2EN                (1<<25) /* External trigger 2 timestamp enable */
-+#define ETS1EN                (1<<24) /* External trigger 1 timestamp enable */
-+#define ALM2EN                (1<<17) /* Timer ALM2 event enable */
-+#define ALM1EN                (1<<16) /* Timer ALM1 event enable */
-+#define PP1EN                 (1<<7) /* Periodic pulse event 1 enable */
-+#define PP2EN                 (1<<6) /* Periodic pulse event 2 enable */
-+
-+/* Bit definitions for the TMR_PEVENT register */
-+#define TXP2                  (1<<9) /* PTP transmitted timestamp im TXTS2 */
-+#define TXP1                  (1<<8) /* PTP transmitted timestamp in TXTS1 */
-+#define RXP                   (1<<0) /* PTP frame has been received */
-+
-+/* Bit definitions for the TMR_PEMASK register */
-+#define TXP2EN                (1<<9) /* Transmit PTP packet event 2 enable */
-+#define TXP1EN                (1<<8) /* Transmit PTP packet event 1 enable */
-+#define RXPEN                 (1<<0) /* Receive PTP packet event enable */
-+
-+/* Bit definitions for the TMR_STAT register */
-+#define STAT_VEC_SHIFT        (0) /* Timer general purpose status vector */
-+#define STAT_VEC_MASK         (0x3f)
-+
-+/* Bit definitions for the TMR_PRSC register */
-+#define PRSC_OCK_SHIFT        (0) /* Output clock division/prescale factor. */
-+#define PRSC_OCK_MASK         (0xffff)
-+
-+
-+#define N_EXT_TS	2
-+
-+static void set_alarm(void)
-+{
-+	u64 ns;
-+
-+	if (mac_dev->fm_rtc_get_cnt)
-+		mac_dev->fm_rtc_get_cnt(mac_dev->fm_dev, &ns);
-+	ns += 1500000000ULL;
-+	ns = div_u64(ns, 1000000000UL) * 1000000000ULL;
-+	ns -= DPA_PTP_NOMINAL_FREQ_PERIOD_NS;
-+	if (mac_dev->fm_rtc_set_alarm)
-+		mac_dev->fm_rtc_set_alarm(mac_dev->fm_dev, 0, ns);
-+}
-+
-+static void set_fipers(void)
-+{
-+	u64 fiper;
-+
-+	if (mac_dev->fm_rtc_disable)
-+		mac_dev->fm_rtc_disable(mac_dev->fm_dev);
-+
-+	set_alarm();
-+	fiper = 1000000000ULL - DPA_PTP_NOMINAL_FREQ_PERIOD_NS;
-+	if (mac_dev->fm_rtc_set_fiper)
-+		mac_dev->fm_rtc_set_fiper(mac_dev->fm_dev, 0, fiper);
-+
-+	if (mac_dev->fm_rtc_enable)
-+		mac_dev->fm_rtc_enable(mac_dev->fm_dev);
-+}
-+
-+/* PTP clock operations */
-+
-+static int ptp_dpa_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
-+{
-+	u64 adj;
-+	u32 diff, tmr_add;
-+	int neg_adj = 0;
-+
-+	if (ppb < 0) {
-+		neg_adj = 1;
-+		ppb = -ppb;
-+	}
-+
-+	tmr_add = freqCompensation;
-+	adj = tmr_add;
-+	adj *= ppb;
-+	diff = div_u64(adj, 1000000000ULL);
-+
-+	tmr_add = neg_adj ? tmr_add - diff : tmr_add + diff;
-+
-+	if (mac_dev->fm_rtc_set_drift)
-+		mac_dev->fm_rtc_set_drift(mac_dev->fm_dev, tmr_add);
-+
-+	return 0;
-+}
-+
-+static int ptp_dpa_adjtime(struct ptp_clock_info *ptp, s64 delta)
-+{
-+	s64 now;
-+
-+	if (mac_dev->fm_rtc_get_cnt)
-+		mac_dev->fm_rtc_get_cnt(mac_dev->fm_dev, &now);
-+
-+	now += delta;
-+
-+	if (mac_dev->fm_rtc_set_cnt)
-+		mac_dev->fm_rtc_set_cnt(mac_dev->fm_dev, now);
-+	set_fipers();
-+
-+	return 0;
-+}
-+
-+static int ptp_dpa_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
-+{
-+	u64 ns;
-+	u32 remainder;
-+
-+	if (mac_dev->fm_rtc_get_cnt)
-+		mac_dev->fm_rtc_get_cnt(mac_dev->fm_dev, &ns);
-+
-+	ts->tv_sec = div_u64_rem(ns, 1000000000, &remainder);
-+	ts->tv_nsec = remainder;
-+	return 0;
-+}
-+
-+static int ptp_dpa_settime(struct ptp_clock_info *ptp,
-+			       const struct timespec64 *ts)
-+{
-+	u64 ns;
-+
-+	ns = ts->tv_sec * 1000000000ULL;
-+	ns += ts->tv_nsec;
-+
-+	if (mac_dev->fm_rtc_set_cnt)
-+		mac_dev->fm_rtc_set_cnt(mac_dev->fm_dev, ns);
-+	set_fipers();
-+	return 0;
-+}
-+
-+static int ptp_dpa_enable(struct ptp_clock_info *ptp,
-+			      struct ptp_clock_request *rq, int on)
-+{
-+	u32 bit;
-+
-+	switch (rq->type) {
-+	case PTP_CLK_REQ_EXTTS:
-+		switch (rq->extts.index) {
-+		case 0:
-+			bit = ETS1EN;
-+			break;
-+		case 1:
-+			bit = ETS2EN;
-+			break;
-+		default:
-+			return -EINVAL;
-+		}
-+		if (on) {
-+			if (mac_dev->fm_rtc_enable_interrupt)
-+				mac_dev->fm_rtc_enable_interrupt(
-+					mac_dev->fm_dev, bit);
-+		} else {
-+			if (mac_dev->fm_rtc_disable_interrupt)
-+				mac_dev->fm_rtc_disable_interrupt(
-+					mac_dev->fm_dev, bit);
-+		}
-+		return 0;
-+
-+	case PTP_CLK_REQ_PPS:
-+		if (on) {
-+			if (mac_dev->fm_rtc_enable_interrupt)
-+				mac_dev->fm_rtc_enable_interrupt(
-+					mac_dev->fm_dev, PP1EN);
-+		} else {
-+			if (mac_dev->fm_rtc_disable_interrupt)
-+				mac_dev->fm_rtc_disable_interrupt(
-+					mac_dev->fm_dev, PP1EN);
-+		}
-+		return 0;
-+
-+	default:
-+		break;
-+	}
-+
-+	return -EOPNOTSUPP;
-+}
-+
-+static struct ptp_clock_info ptp_dpa_caps = {
-+	.owner		= THIS_MODULE,
-+	.name		= "dpaa clock",
-+	.max_adj	= 512000,
-+	.n_alarm	= 0,
-+	.n_ext_ts	= N_EXT_TS,
-+	.n_per_out	= 0,
-+	.pps		= 1,
-+	.adjfreq	= ptp_dpa_adjfreq,
-+	.adjtime	= ptp_dpa_adjtime,
-+	.gettime64	= ptp_dpa_gettime,
-+	.settime64	= ptp_dpa_settime,
-+	.enable		= ptp_dpa_enable,
-+};
-+
-+static int __init __cold dpa_ptp_load(void)
-+{
-+	struct device *ptp_dev;
-+	struct timespec64 now;
-+	int dpa_phc_index;
-+	int err;
-+
-+	if (!(ptp_priv.of_dev && ptp_priv.mac_dev))
-+		return -ENODEV;
-+
-+	ptp_dev = &ptp_priv.of_dev->dev;
-+	mac_dev = ptp_priv.mac_dev;
-+
-+	if (mac_dev->fm_rtc_get_drift)
-+		mac_dev->fm_rtc_get_drift(mac_dev->fm_dev, &freqCompensation);
-+
-+	getnstimeofday64(&now);
-+	ptp_dpa_settime(&ptp_dpa_caps, &now);
-+
-+	clock = ptp_clock_register(&ptp_dpa_caps, ptp_dev);
-+	if (IS_ERR(clock)) {
-+		err = PTR_ERR(clock);
-+		return err;
-+	}
-+	dpa_phc_index = ptp_clock_index(clock);
-+	return 0;
-+}
-+module_init(dpa_ptp_load);
-+
-+static void __exit __cold dpa_ptp_unload(void)
-+{
-+	if (mac_dev->fm_rtc_disable_interrupt)
-+		mac_dev->fm_rtc_disable_interrupt(mac_dev->fm_dev, 0xffffffff);
-+	ptp_clock_unregister(clock);
-+}
-+module_exit(dpa_ptp_unload);
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c
-@@ -0,0 +1,909 @@
-+/* Copyright 2008-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifdef CONFIG_FSL_DPAA_ETH_DEBUG
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": %s:%hu:%s() " fmt, \
-+	KBUILD_BASENAME".c", __LINE__, __func__
-+#else
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": " fmt
-+#endif
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/io.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_mdio.h>
-+#include <linux/phy.h>
-+#include <linux/netdevice.h>
-+
-+#include "dpaa_eth.h"
-+#include "mac.h"
-+#include "lnxwrp_fsl_fman.h"
-+
-+#include "error_ext.h"	/* GET_ERROR_TYPE, E_OK */
-+
-+#include "fsl_fman_dtsec.h"
-+#include "fsl_fman_tgec.h"
-+#include "fsl_fman_memac.h"
-+#include "../sdk_fman/src/wrapper/lnxwrp_sysfs_fm.h"
-+
-+#define MAC_DESCRIPTION "FSL FMan MAC API based driver"
-+
-+MODULE_LICENSE("Dual BSD/GPL");
-+
-+MODULE_AUTHOR("Emil Medve <Emilian.Medve@Freescale.com>");
-+
-+MODULE_DESCRIPTION(MAC_DESCRIPTION);
-+
-+struct mac_priv_s {
-+	struct fm_mac_dev *fm_mac;
-+};
-+
-+const char	*mac_driver_description __initconst = MAC_DESCRIPTION;
-+const size_t	 mac_sizeof_priv[] = {
-+	[DTSEC] = sizeof(struct mac_priv_s),
-+	[XGMAC] = sizeof(struct mac_priv_s),
-+	[MEMAC] = sizeof(struct mac_priv_s)
-+};
-+
-+static const enet_mode_t _100[] = {
-+	[PHY_INTERFACE_MODE_MII]	= e_ENET_MODE_MII_100,
-+	[PHY_INTERFACE_MODE_RMII]	= e_ENET_MODE_RMII_100
-+};
-+
-+static const enet_mode_t _1000[] = {
-+	[PHY_INTERFACE_MODE_GMII]	= e_ENET_MODE_GMII_1000,
-+	[PHY_INTERFACE_MODE_SGMII]	= e_ENET_MODE_SGMII_1000,
-+	[PHY_INTERFACE_MODE_QSGMII]	= e_ENET_MODE_QSGMII_1000,
-+	[PHY_INTERFACE_MODE_TBI]	= e_ENET_MODE_TBI_1000,
-+	[PHY_INTERFACE_MODE_RGMII]	= e_ENET_MODE_RGMII_1000,
-+	[PHY_INTERFACE_MODE_RGMII_ID]	= e_ENET_MODE_RGMII_1000,
-+	[PHY_INTERFACE_MODE_RGMII_RXID]	= e_ENET_MODE_RGMII_1000,
-+	[PHY_INTERFACE_MODE_RGMII_TXID]	= e_ENET_MODE_RGMII_1000,
-+	[PHY_INTERFACE_MODE_RTBI]	= e_ENET_MODE_RTBI_1000
-+};
-+
-+static enet_mode_t __cold __attribute__((nonnull))
-+macdev2enetinterface(const struct mac_device *mac_dev)
-+{
-+	switch (mac_dev->max_speed) {
-+	case SPEED_100:
-+		return _100[mac_dev->phy_if];
-+	case SPEED_1000:
-+		return _1000[mac_dev->phy_if];
-+	case SPEED_2500:
-+		return e_ENET_MODE_SGMII_2500;
-+	case SPEED_10000:
-+		return e_ENET_MODE_XGMII_10000;
-+	default:
-+		return e_ENET_MODE_MII_100;
-+	}
-+}
-+
-+static void mac_exception(handle_t _mac_dev, e_FmMacExceptions exception)
-+{
-+	struct mac_device	*mac_dev;
-+
-+	mac_dev = (struct mac_device *)_mac_dev;
-+
-+	if (e_FM_MAC_EX_10G_RX_FIFO_OVFL == exception) {
-+		/* don't flag RX FIFO after the first */
-+		fm_mac_set_exception(mac_dev->get_mac_handle(mac_dev),
-+		    e_FM_MAC_EX_10G_RX_FIFO_OVFL, false);
-+		dev_err(mac_dev->dev, "10G MAC got RX FIFO Error = %x\n",
-+				exception);
-+	}
-+
-+	dev_dbg(mac_dev->dev, "%s:%s() -> %d\n", KBUILD_BASENAME".c", __func__,
-+		exception);
-+}
-+
-+static int __cold init(struct mac_device *mac_dev)
-+{
-+	int					_errno;
-+	struct mac_priv_s	*priv;
-+	t_FmMacParams		param;
-+	uint32_t			version;
-+
-+	priv = macdev_priv(mac_dev);
-+
-+	param.baseAddr =  (typeof(param.baseAddr))(uintptr_t)devm_ioremap(
-+		mac_dev->dev, mac_dev->res->start, 0x2000);
-+	param.enetMode	= macdev2enetinterface(mac_dev);
-+	memcpy(&param.addr, mac_dev->addr, min(sizeof(param.addr),
-+		sizeof(mac_dev->addr)));
-+	param.macId		= mac_dev->cell_index;
-+	param.h_Fm		= (handle_t)mac_dev->fm;
-+	param.mdioIrq		= NO_IRQ;
-+	param.f_Exception	= mac_exception;
-+	param.f_Event		= mac_exception;
-+	param.h_App		= mac_dev;
-+
-+	priv->fm_mac = fm_mac_config(&param);
-+	if (unlikely(priv->fm_mac == NULL)) {
-+		_errno = -EINVAL;
-+		goto _return;
-+	}
-+
-+	fm_mac_set_handle(mac_dev->fm_dev, priv->fm_mac,
-+		(macdev2enetinterface(mac_dev) != e_ENET_MODE_XGMII_10000) ?
-+			param.macId : param.macId + FM_MAX_NUM_OF_1G_MACS);
-+
-+	_errno = fm_mac_config_max_frame_length(priv->fm_mac,
-+					  fm_get_max_frm());
-+	if (unlikely(_errno < 0))
-+		goto _return_fm_mac_free;
-+
-+	if (macdev2enetinterface(mac_dev) != e_ENET_MODE_XGMII_10000) {
-+		/* 10G always works with pad and CRC */
-+		_errno = fm_mac_config_pad_and_crc(priv->fm_mac, true);
-+		if (unlikely(_errno < 0))
-+			goto _return_fm_mac_free;
-+
-+		_errno = fm_mac_config_half_duplex(priv->fm_mac,
-+				mac_dev->half_duplex);
-+		if (unlikely(_errno < 0))
-+			goto _return_fm_mac_free;
-+	} else {
-+		_errno = fm_mac_config_reset_on_init(priv->fm_mac, true);
-+		if (unlikely(_errno < 0))
-+			goto _return_fm_mac_free;
-+	}
-+
-+	_errno = fm_mac_init(priv->fm_mac);
-+	if (unlikely(_errno < 0))
-+		goto _return_fm_mac_free;
-+
-+#ifndef CONFIG_FMAN_MIB_CNT_OVF_IRQ_EN
-+	/* For 1G MAC, disable by default the MIB counters overflow interrupt */
-+	if (macdev2enetinterface(mac_dev) != e_ENET_MODE_XGMII_10000) {
-+		_errno = fm_mac_set_exception(mac_dev->get_mac_handle(mac_dev),
-+				e_FM_MAC_EX_1G_RX_MIB_CNT_OVFL, FALSE);
-+		if (unlikely(_errno < 0))
-+			goto _return_fm_mac_free;
-+	}
-+#endif /* !CONFIG_FMAN_MIB_CNT_OVF_IRQ_EN */
-+
-+	/* For 10G MAC, disable Tx ECC exception */
-+	if (macdev2enetinterface(mac_dev) == e_ENET_MODE_XGMII_10000) {
-+		_errno = fm_mac_set_exception(mac_dev->get_mac_handle(mac_dev),
-+					  e_FM_MAC_EX_10G_1TX_ECC_ER, FALSE);
-+		if (unlikely(_errno < 0))
-+			goto _return_fm_mac_free;
-+	}
-+
-+	_errno = fm_mac_get_version(priv->fm_mac, &version);
-+	if (unlikely(_errno < 0))
-+		goto _return_fm_mac_free;
-+
-+	dev_info(mac_dev->dev, "FMan %s version: 0x%08x\n",
-+		((macdev2enetinterface(mac_dev) != e_ENET_MODE_XGMII_10000) ?
-+			"dTSEC" : "XGEC"), version);
-+
-+	goto _return;
-+
-+
-+_return_fm_mac_free:
-+	fm_mac_free(mac_dev->get_mac_handle(mac_dev));
-+
-+_return:
-+	return _errno;
-+}
-+
-+static int __cold memac_init(struct mac_device *mac_dev)
-+{
-+	int			_errno;
-+	struct mac_priv_s	*priv;
-+	t_FmMacParams		param;
-+
-+	priv = macdev_priv(mac_dev);
-+
-+	param.baseAddr =  (typeof(param.baseAddr))(uintptr_t)devm_ioremap(
-+		mac_dev->dev, mac_dev->res->start, 0x2000);
-+	param.enetMode	= macdev2enetinterface(mac_dev);
-+	memcpy(&param.addr, mac_dev->addr, sizeof(mac_dev->addr));
-+	param.macId		= mac_dev->cell_index;
-+	param.h_Fm		= (handle_t)mac_dev->fm;
-+	param.mdioIrq		= NO_IRQ;
-+	param.f_Exception	= mac_exception;
-+	param.f_Event		= mac_exception;
-+	param.h_App		= mac_dev;
-+
-+	priv->fm_mac = fm_mac_config(&param);
-+	if (unlikely(priv->fm_mac == NULL)) {
-+		_errno = -EINVAL;
-+		goto _return;
-+	}
-+
-+	fm_mac_set_handle(mac_dev->fm_dev, priv->fm_mac,
-+		(macdev2enetinterface(mac_dev) != e_ENET_MODE_XGMII_10000) ?
-+			param.macId : param.macId + FM_MAX_NUM_OF_1G_MACS);
-+
-+	_errno = fm_mac_config_max_frame_length(priv->fm_mac, fm_get_max_frm());
-+	if (unlikely(_errno < 0))
-+		goto _return_fm_mac_free;
-+
-+	_errno = fm_mac_config_reset_on_init(priv->fm_mac, true);
-+	if (unlikely(_errno < 0))
-+		goto _return_fm_mac_free;
-+
-+	_errno = fm_mac_init(priv->fm_mac);
-+	if (unlikely(_errno < 0))
-+		goto _return_fm_mac_free;
-+
-+	dev_info(mac_dev->dev, "FMan MEMAC\n");
-+
-+	goto _return;
-+
-+_return_fm_mac_free:
-+	fm_mac_free(priv->fm_mac);
-+
-+_return:
-+	return _errno;
-+}
-+
-+static int __cold start(struct mac_device *mac_dev)
-+{
-+	int	 _errno;
-+	struct phy_device *phy_dev = mac_dev->phy_dev;
-+
-+	_errno = fm_mac_enable(mac_dev->get_mac_handle(mac_dev));
-+
-+	if (!_errno && phy_dev)
-+		phy_start(phy_dev);
-+
-+	return _errno;
-+}
-+
-+static int __cold stop(struct mac_device *mac_dev)
-+{
-+	if (mac_dev->phy_dev)
-+		phy_stop(mac_dev->phy_dev);
-+
-+	return fm_mac_disable(mac_dev->get_mac_handle(mac_dev));
-+}
-+
-+static int __cold set_multi(struct net_device *net_dev,
-+			    struct mac_device *mac_dev)
-+{
-+	struct mac_priv_s	*mac_priv;
-+	struct mac_address	*old_addr, *tmp;
-+	struct netdev_hw_addr	*ha;
-+	int			_errno;
-+
-+	mac_priv = macdev_priv(mac_dev);
-+
-+	/* Clear previous address list */
-+	list_for_each_entry_safe(old_addr, tmp, &mac_dev->mc_addr_list, list) {
-+		_errno = fm_mac_remove_hash_mac_addr(mac_priv->fm_mac,
-+				(t_EnetAddr *)old_addr->addr);
-+		if (_errno < 0)
-+			return _errno;
-+
-+		list_del(&old_addr->list);
-+		kfree(old_addr);
-+	}
-+
-+	/* Add all the addresses from the new list */
-+	netdev_for_each_mc_addr(ha, net_dev) {
-+		_errno = fm_mac_add_hash_mac_addr(mac_priv->fm_mac,
-+				(t_EnetAddr *)ha->addr);
-+		if (_errno < 0)
-+			return _errno;
-+
-+		tmp = kmalloc(sizeof(struct mac_address), GFP_ATOMIC);
-+		if (!tmp) {
-+			dev_err(mac_dev->dev, "Out of memory\n");
-+			return -ENOMEM;
-+		}
-+		memcpy(tmp->addr, ha->addr, ETH_ALEN);
-+		list_add(&tmp->list, &mac_dev->mc_addr_list);
-+	}
-+	return 0;
-+}
-+
-+/* Avoid redundant calls to FMD, if the MAC driver already contains the desired
-+ * active PAUSE settings. Otherwise, the new active settings should be reflected
-+ * in FMan.
-+ */
-+int set_mac_active_pause(struct mac_device *mac_dev, bool rx, bool tx)
-+{
-+	struct fm_mac_dev *fm_mac_dev = mac_dev->get_mac_handle(mac_dev);
-+	int _errno = 0;
-+
-+	if (unlikely(rx != mac_dev->rx_pause_active)) {
-+		_errno = fm_mac_set_rx_pause_frames(fm_mac_dev, rx);
-+		if (likely(_errno == 0))
-+			mac_dev->rx_pause_active = rx;
-+	}
-+
-+	if (unlikely(tx != mac_dev->tx_pause_active)) {
-+		_errno = fm_mac_set_tx_pause_frames(fm_mac_dev, tx);
-+		if (likely(_errno == 0))
-+			mac_dev->tx_pause_active = tx;
-+	}
-+
-+	return _errno;
-+}
-+EXPORT_SYMBOL(set_mac_active_pause);
-+
-+/* Determine the MAC RX/TX PAUSE frames settings based on PHY
-+ * autonegotiation or values set by eththool.
-+ */
-+void get_pause_cfg(struct mac_device *mac_dev, bool *rx_pause, bool *tx_pause)
-+{
-+	struct phy_device *phy_dev = mac_dev->phy_dev;
-+	u16 lcl_adv, rmt_adv;
-+	u8 flowctrl;
-+
-+	*rx_pause = *tx_pause = false;
-+
-+	if (!phy_dev->duplex)
-+		return;
-+
-+	/* If PAUSE autonegotiation is disabled, the TX/RX PAUSE settings
-+	 * are those set by ethtool.
-+	 */
-+	if (!mac_dev->autoneg_pause) {
-+		*rx_pause = mac_dev->rx_pause_req;
-+		*tx_pause = mac_dev->tx_pause_req;
-+		return;
-+	}
-+
-+	/* Else if PAUSE autonegotiation is enabled, the TX/RX PAUSE
-+	 * settings depend on the result of the link negotiation.
-+	 */
-+
-+	/* get local capabilities */
-+	lcl_adv = 0;
-+	if (phy_dev->advertising & ADVERTISED_Pause)
-+		lcl_adv |= ADVERTISE_PAUSE_CAP;
-+	if (phy_dev->advertising & ADVERTISED_Asym_Pause)
-+		lcl_adv |= ADVERTISE_PAUSE_ASYM;
-+
-+	/* get link partner capabilities */
-+	rmt_adv = 0;
-+	if (phy_dev->pause)
-+		rmt_adv |= LPA_PAUSE_CAP;
-+	if (phy_dev->asym_pause)
-+		rmt_adv |= LPA_PAUSE_ASYM;
-+
-+	/* Calculate TX/RX settings based on local and peer advertised
-+	 * symmetric/asymmetric PAUSE capabilities.
-+	 */
-+	flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
-+	if (flowctrl & FLOW_CTRL_RX)
-+		*rx_pause = true;
-+	if (flowctrl & FLOW_CTRL_TX)
-+		*tx_pause = true;
-+}
-+EXPORT_SYMBOL(get_pause_cfg);
-+
-+static void adjust_link_void(struct net_device *net_dev)
-+{
-+}
-+
-+static void adjust_link(struct net_device *net_dev)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(net_dev);
-+	struct mac_device *mac_dev = priv->mac_dev;
-+	struct phy_device *phy_dev = mac_dev->phy_dev;
-+	struct fm_mac_dev *fm_mac_dev;
-+	bool rx_pause, tx_pause;
-+	int _errno;
-+
-+	fm_mac_dev = mac_dev->get_mac_handle(mac_dev);
-+	fm_mac_adjust_link(fm_mac_dev, phy_dev->link, phy_dev->speed,
-+			phy_dev->duplex);
-+
-+	get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
-+	_errno = set_mac_active_pause(mac_dev, rx_pause, tx_pause);
-+	if (unlikely(_errno < 0))
-+		netdev_err(net_dev, "set_mac_active_pause() = %d\n", _errno);
-+}
-+
-+/* Initializes driver's PHY state, and attaches to the PHY.
-+ * Returns 0 on success.
-+ */
-+static int dtsec_init_phy(struct net_device *net_dev,
-+			  struct mac_device *mac_dev)
-+{
-+	struct phy_device	*phy_dev;
-+
-+	if (of_phy_is_fixed_link(mac_dev->phy_node))
-+		phy_dev = of_phy_attach(net_dev, mac_dev->phy_node,
-+					0, mac_dev->phy_if);
-+	else
-+		phy_dev = of_phy_connect(net_dev, mac_dev->phy_node,
-+					 &adjust_link, 0, mac_dev->phy_if);
-+	if (unlikely(phy_dev == NULL) || IS_ERR(phy_dev)) {
-+		netdev_err(net_dev, "Could not connect to PHY %s\n",
-+				mac_dev->phy_node ?
-+					mac_dev->phy_node->full_name :
-+					mac_dev->fixed_bus_id);
-+		return phy_dev == NULL ? -ENODEV : PTR_ERR(phy_dev);
-+	}
-+
-+	/* Remove any features not supported by the controller */
-+	phy_dev->supported &= mac_dev->if_support;
-+	/* Enable the symmetric and asymmetric PAUSE frame advertisements,
-+	 * as most of the PHY drivers do not enable them by default.
-+	 */
-+	phy_dev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
-+	phy_dev->advertising = phy_dev->supported;
-+
-+	mac_dev->phy_dev = phy_dev;
-+
-+	return 0;
-+}
-+
-+static int xgmac_init_phy(struct net_device *net_dev,
-+			  struct mac_device *mac_dev)
-+{
-+	struct phy_device *phy_dev;
-+
-+	if (of_phy_is_fixed_link(mac_dev->phy_node))
-+		phy_dev = of_phy_attach(net_dev, mac_dev->phy_node,
-+					0, mac_dev->phy_if);
-+	else
-+		phy_dev = of_phy_connect(net_dev, mac_dev->phy_node,
-+					 &adjust_link_void, 0, mac_dev->phy_if);
-+	if (unlikely(phy_dev == NULL) || IS_ERR(phy_dev)) {
-+		netdev_err(net_dev, "Could not attach to PHY %s\n",
-+				mac_dev->phy_node ?
-+					mac_dev->phy_node->full_name :
-+					mac_dev->fixed_bus_id);
-+		return phy_dev == NULL ? -ENODEV : PTR_ERR(phy_dev);
-+	}
-+
-+	phy_dev->supported &= mac_dev->if_support;
-+	/* Enable the symmetric and asymmetric PAUSE frame advertisements,
-+	 * as most of the PHY drivers do not enable them by default.
-+	 */
-+	phy_dev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
-+	phy_dev->advertising = phy_dev->supported;
-+
-+	mac_dev->phy_dev = phy_dev;
-+
-+	return 0;
-+}
-+
-+static int memac_init_phy(struct net_device *net_dev,
-+			  struct mac_device *mac_dev)
-+{
-+	struct phy_device       *phy_dev;
-+
-+	if (of_phy_is_fixed_link(mac_dev->phy_node)) {
-+		phy_dev = of_phy_attach(net_dev, mac_dev->phy_node,
-+					0, mac_dev->phy_if);
-+	} else if ((macdev2enetinterface(mac_dev) == e_ENET_MODE_XGMII_10000) ||
-+		   (macdev2enetinterface(mac_dev) == e_ENET_MODE_SGMII_2500)) {
-+		phy_dev = of_phy_connect(net_dev, mac_dev->phy_node,
-+					 &adjust_link_void, 0,
-+					 mac_dev->phy_if);
-+	} else {
-+		phy_dev = of_phy_connect(net_dev, mac_dev->phy_node,
-+					 &adjust_link, 0, mac_dev->phy_if);
-+	}
-+
-+	if (unlikely(phy_dev == NULL) || IS_ERR(phy_dev)) {
-+		netdev_err(net_dev, "Could not connect to PHY %s\n",
-+			mac_dev->phy_node ?
-+				mac_dev->phy_node->full_name :
-+				mac_dev->fixed_bus_id);
-+		return phy_dev == NULL ? -ENODEV : PTR_ERR(phy_dev);
-+	}
-+
-+	/* Remove any features not supported by the controller */
-+	phy_dev->supported &= mac_dev->if_support;
-+	/* Enable the symmetric and asymmetric PAUSE frame advertisements,
-+	 * as most of the PHY drivers do not enable them by default.
-+	 */
-+	phy_dev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
-+	phy_dev->advertising = phy_dev->supported;
-+
-+	mac_dev->phy_dev = phy_dev;
-+
-+	return 0;
-+}
-+
-+static int __cold uninit(struct fm_mac_dev *fm_mac_dev)
-+{
-+	int			 _errno, __errno;
-+
-+	_errno = fm_mac_disable(fm_mac_dev);
-+	__errno = fm_mac_free(fm_mac_dev);
-+
-+	if (unlikely(__errno < 0))
-+		_errno = __errno;
-+
-+	return _errno;
-+}
-+
-+static struct fm_mac_dev *get_mac_handle(struct mac_device *mac_dev)
-+{
-+	const struct mac_priv_s	*priv;
-+	priv = macdev_priv(mac_dev);
-+	return priv->fm_mac;
-+}
-+
-+static int dtsec_dump_regs(struct mac_device *h_mac, char *buf, int nn)
-+{
-+	struct dtsec_regs	*p_mm = (struct dtsec_regs *) h_mac->vaddr;
-+	int			i = 0, n = nn;
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+
-+	FM_DMP_TITLE(buf, n, p_mm, "FM MAC - DTSEC-%d", h_mac->cell_index);
-+
-+	FM_DMP_V32(buf, n, p_mm, tsec_id);
-+	FM_DMP_V32(buf, n, p_mm, tsec_id2);
-+	FM_DMP_V32(buf, n, p_mm, ievent);
-+	FM_DMP_V32(buf, n, p_mm, imask);
-+	FM_DMP_V32(buf, n, p_mm, ecntrl);
-+	FM_DMP_V32(buf, n, p_mm, ptv);
-+	FM_DMP_V32(buf, n, p_mm, tmr_ctrl);
-+	FM_DMP_V32(buf, n, p_mm, tmr_pevent);
-+	FM_DMP_V32(buf, n, p_mm, tmr_pemask);
-+	FM_DMP_V32(buf, n, p_mm, tctrl);
-+	FM_DMP_V32(buf, n, p_mm, rctrl);
-+	FM_DMP_V32(buf, n, p_mm, maccfg1);
-+	FM_DMP_V32(buf, n, p_mm, maccfg2);
-+	FM_DMP_V32(buf, n, p_mm, ipgifg);
-+	FM_DMP_V32(buf, n, p_mm, hafdup);
-+	FM_DMP_V32(buf, n, p_mm, maxfrm);
-+
-+	FM_DMP_V32(buf, n, p_mm, macstnaddr1);
-+	FM_DMP_V32(buf, n, p_mm, macstnaddr2);
-+
-+	for (i = 0; i < 7; ++i) {
-+		FM_DMP_V32(buf, n, p_mm, macaddr[i].exact_match1);
-+		FM_DMP_V32(buf, n, p_mm, macaddr[i].exact_match2);
-+	}
-+
-+	FM_DMP_V32(buf, n, p_mm, car1);
-+	FM_DMP_V32(buf, n, p_mm, car2);
-+
-+	return n;
-+}
-+
-+static int xgmac_dump_regs(struct mac_device *h_mac, char *buf, int nn)
-+{
-+	struct tgec_regs	*p_mm = (struct tgec_regs *) h_mac->vaddr;
-+	int			n = nn;
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+	FM_DMP_TITLE(buf, n, p_mm, "FM MAC - TGEC -%d", h_mac->cell_index);
-+
-+	FM_DMP_V32(buf, n, p_mm, tgec_id);
-+	FM_DMP_V32(buf, n, p_mm, command_config);
-+	FM_DMP_V32(buf, n, p_mm, mac_addr_0);
-+	FM_DMP_V32(buf, n, p_mm, mac_addr_1);
-+	FM_DMP_V32(buf, n, p_mm, maxfrm);
-+	FM_DMP_V32(buf, n, p_mm, pause_quant);
-+	FM_DMP_V32(buf, n, p_mm, rx_fifo_sections);
-+	FM_DMP_V32(buf, n, p_mm, tx_fifo_sections);
-+	FM_DMP_V32(buf, n, p_mm, rx_fifo_almost_f_e);
-+	FM_DMP_V32(buf, n, p_mm, tx_fifo_almost_f_e);
-+	FM_DMP_V32(buf, n, p_mm, hashtable_ctrl);
-+	FM_DMP_V32(buf, n, p_mm, mdio_cfg_status);
-+	FM_DMP_V32(buf, n, p_mm, mdio_command);
-+	FM_DMP_V32(buf, n, p_mm, mdio_data);
-+	FM_DMP_V32(buf, n, p_mm, mdio_regaddr);
-+	FM_DMP_V32(buf, n, p_mm, status);
-+	FM_DMP_V32(buf, n, p_mm, tx_ipg_len);
-+	FM_DMP_V32(buf, n, p_mm, mac_addr_2);
-+	FM_DMP_V32(buf, n, p_mm, mac_addr_3);
-+	FM_DMP_V32(buf, n, p_mm, rx_fifo_ptr_rd);
-+	FM_DMP_V32(buf, n, p_mm, rx_fifo_ptr_wr);
-+	FM_DMP_V32(buf, n, p_mm, tx_fifo_ptr_rd);
-+	FM_DMP_V32(buf, n, p_mm, tx_fifo_ptr_wr);
-+	FM_DMP_V32(buf, n, p_mm, imask);
-+	FM_DMP_V32(buf, n, p_mm, ievent);
-+
-+	return n;
-+}
-+
-+static int memac_dump_regs(struct mac_device *h_mac, char *buf, int nn)
-+{
-+	struct memac_regs	*p_mm = (struct memac_regs *) h_mac->vaddr;
-+	int			i = 0, n = nn;
-+
-+	FM_DMP_SUBTITLE(buf, n, "\n");
-+	FM_DMP_TITLE(buf, n, p_mm, "FM MAC - MEMAC -%d", h_mac->cell_index);
-+
-+	FM_DMP_V32(buf, n, p_mm, command_config);
-+	FM_DMP_V32(buf, n, p_mm, mac_addr0.mac_addr_l);
-+	FM_DMP_V32(buf, n, p_mm, mac_addr0.mac_addr_u);
-+	FM_DMP_V32(buf, n, p_mm, maxfrm);
-+	FM_DMP_V32(buf, n, p_mm, hashtable_ctrl);
-+	FM_DMP_V32(buf, n, p_mm, ievent);
-+	FM_DMP_V32(buf, n, p_mm, tx_ipg_length);
-+	FM_DMP_V32(buf, n, p_mm, imask);
-+
-+	for (i = 0; i < 4; ++i)
-+		FM_DMP_V32(buf, n, p_mm, pause_quanta[i]);
-+
-+	for (i = 0; i < 4; ++i)
-+		FM_DMP_V32(buf, n, p_mm, pause_thresh[i]);
-+
-+	FM_DMP_V32(buf, n, p_mm, rx_pause_status);
-+
-+	for (i = 0; i < MEMAC_NUM_OF_PADDRS; ++i) {
-+		FM_DMP_V32(buf, n, p_mm, mac_addr[i].mac_addr_l);
-+		FM_DMP_V32(buf, n, p_mm, mac_addr[i].mac_addr_u);
-+	}
-+
-+	FM_DMP_V32(buf, n, p_mm, lpwake_timer);
-+	FM_DMP_V32(buf, n, p_mm, sleep_timer);
-+	FM_DMP_V32(buf, n, p_mm, statn_config);
-+        FM_DMP_V32(buf, n, p_mm, if_mode);
-+        FM_DMP_V32(buf, n, p_mm, if_status);
-+        FM_DMP_V32(buf, n, p_mm, hg_config);
-+        FM_DMP_V32(buf, n, p_mm, hg_pause_quanta);
-+        FM_DMP_V32(buf, n, p_mm, hg_pause_thresh);
-+        FM_DMP_V32(buf, n, p_mm, hgrx_pause_status);
-+        FM_DMP_V32(buf, n, p_mm, hg_fifos_status);
-+        FM_DMP_V32(buf, n, p_mm, rhm);
-+        FM_DMP_V32(buf, n, p_mm, thm);
-+
-+	return n;
-+}
-+
-+static int memac_dump_regs_rx(struct mac_device *h_mac, char *buf, int nn)
-+{
-+        struct memac_regs       *p_mm = (struct memac_regs *) h_mac->vaddr;
-+        int                     n = nn;
-+
-+        FM_DMP_SUBTITLE(buf, n, "\n");
-+        FM_DMP_TITLE(buf, n, p_mm, "FM MAC - MEMAC -%d Rx stats", h_mac->cell_index);
-+
-+	/* Rx Statistics Counter */
-+	FM_DMP_V32(buf, n, p_mm, reoct_l);
-+	FM_DMP_V32(buf, n, p_mm, reoct_u);
-+	FM_DMP_V32(buf, n, p_mm, roct_l);
-+	FM_DMP_V32(buf, n, p_mm, roct_u);
-+	FM_DMP_V32(buf, n, p_mm, raln_l);
-+	FM_DMP_V32(buf, n, p_mm, raln_u);
-+	FM_DMP_V32(buf, n, p_mm, rxpf_l);
-+	FM_DMP_V32(buf, n, p_mm, rxpf_u);
-+	FM_DMP_V32(buf, n, p_mm, rfrm_l);
-+	FM_DMP_V32(buf, n, p_mm, rfrm_u);
-+	FM_DMP_V32(buf, n, p_mm, rfcs_l);
-+	FM_DMP_V32(buf, n, p_mm, rfcs_u);
-+	FM_DMP_V32(buf, n, p_mm, rvlan_l);
-+	FM_DMP_V32(buf, n, p_mm, rvlan_u);
-+	FM_DMP_V32(buf, n, p_mm, rerr_l);
-+	FM_DMP_V32(buf, n, p_mm, rerr_u);
-+	FM_DMP_V32(buf, n, p_mm, ruca_l);
-+	FM_DMP_V32(buf, n, p_mm, ruca_u);
-+	FM_DMP_V32(buf, n, p_mm, rmca_l);
-+	FM_DMP_V32(buf, n, p_mm, rmca_u);
-+	FM_DMP_V32(buf, n, p_mm, rbca_l);
-+	FM_DMP_V32(buf, n, p_mm, rbca_u);
-+	FM_DMP_V32(buf, n, p_mm, rdrp_l);
-+	FM_DMP_V32(buf, n, p_mm, rdrp_u);
-+	FM_DMP_V32(buf, n, p_mm, rpkt_l);
-+	FM_DMP_V32(buf, n, p_mm, rpkt_u);
-+	FM_DMP_V32(buf, n, p_mm, rund_l);
-+	FM_DMP_V32(buf, n, p_mm, rund_u);
-+	FM_DMP_V32(buf, n, p_mm, r64_l);
-+	FM_DMP_V32(buf, n, p_mm, r64_u);
-+	FM_DMP_V32(buf, n, p_mm, r127_l);
-+	FM_DMP_V32(buf, n, p_mm, r127_u);
-+	FM_DMP_V32(buf, n, p_mm, r255_l);
-+	FM_DMP_V32(buf, n, p_mm, r255_u);
-+	FM_DMP_V32(buf, n, p_mm, r511_l);
-+	FM_DMP_V32(buf, n, p_mm, r511_u);
-+	FM_DMP_V32(buf, n, p_mm, r1023_l);
-+	FM_DMP_V32(buf, n, p_mm, r1023_u);
-+	FM_DMP_V32(buf, n, p_mm, r1518_l);
-+	FM_DMP_V32(buf, n, p_mm, r1518_u);
-+	FM_DMP_V32(buf, n, p_mm, r1519x_l);
-+	FM_DMP_V32(buf, n, p_mm, r1519x_u);
-+	FM_DMP_V32(buf, n, p_mm, rovr_l);
-+	FM_DMP_V32(buf, n, p_mm, rovr_u);
-+	FM_DMP_V32(buf, n, p_mm, rjbr_l);
-+	FM_DMP_V32(buf, n, p_mm, rjbr_u);
-+	FM_DMP_V32(buf, n, p_mm, rfrg_l);
-+	FM_DMP_V32(buf, n, p_mm, rfrg_u);
-+	FM_DMP_V32(buf, n, p_mm, rcnp_l);
-+	FM_DMP_V32(buf, n, p_mm, rcnp_u);
-+	FM_DMP_V32(buf, n, p_mm, rdrntp_l);
-+	FM_DMP_V32(buf, n, p_mm, rdrntp_u);
-+
-+	return n;
-+}
-+
-+static int memac_dump_regs_tx(struct mac_device *h_mac, char *buf, int nn)
-+{
-+        struct memac_regs       *p_mm = (struct memac_regs *) h_mac->vaddr;
-+        int                     n = nn;
-+
-+        FM_DMP_SUBTITLE(buf, n, "\n");
-+        FM_DMP_TITLE(buf, n, p_mm, "FM MAC - MEMAC -%d Tx stats", h_mac->cell_index);
-+
-+
-+	/* Tx Statistics Counter */
-+	FM_DMP_V32(buf, n, p_mm, teoct_l);
-+	FM_DMP_V32(buf, n, p_mm, teoct_u);
-+	FM_DMP_V32(buf, n, p_mm, toct_l);
-+	FM_DMP_V32(buf, n, p_mm, toct_u);
-+	FM_DMP_V32(buf, n, p_mm, txpf_l);
-+	FM_DMP_V32(buf, n, p_mm, txpf_u);
-+	FM_DMP_V32(buf, n, p_mm, tfrm_l);
-+	FM_DMP_V32(buf, n, p_mm, tfrm_u);
-+	FM_DMP_V32(buf, n, p_mm, tfcs_l);
-+	FM_DMP_V32(buf, n, p_mm, tfcs_u);
-+	FM_DMP_V32(buf, n, p_mm, tvlan_l);
-+	FM_DMP_V32(buf, n, p_mm, tvlan_u);
-+	FM_DMP_V32(buf, n, p_mm, terr_l);
-+	FM_DMP_V32(buf, n, p_mm, terr_u);
-+	FM_DMP_V32(buf, n, p_mm, tuca_l);
-+	FM_DMP_V32(buf, n, p_mm, tuca_u);
-+	FM_DMP_V32(buf, n, p_mm, tmca_l);
-+	FM_DMP_V32(buf, n, p_mm, tmca_u);
-+	FM_DMP_V32(buf, n, p_mm, tbca_l);
-+	FM_DMP_V32(buf, n, p_mm, tbca_u);
-+	FM_DMP_V32(buf, n, p_mm, tpkt_l);
-+	FM_DMP_V32(buf, n, p_mm, tpkt_u);
-+	FM_DMP_V32(buf, n, p_mm, tund_l);
-+	FM_DMP_V32(buf, n, p_mm, tund_u);
-+	FM_DMP_V32(buf, n, p_mm, t64_l);
-+	FM_DMP_V32(buf, n, p_mm, t64_u);
-+	FM_DMP_V32(buf, n, p_mm, t127_l);
-+	FM_DMP_V32(buf, n, p_mm, t127_u);
-+	FM_DMP_V32(buf, n, p_mm, t255_l);
-+	FM_DMP_V32(buf, n, p_mm, t255_u);
-+	FM_DMP_V32(buf, n, p_mm, t511_l);
-+	FM_DMP_V32(buf, n, p_mm, t511_u);
-+	FM_DMP_V32(buf, n, p_mm, t1023_l);
-+	FM_DMP_V32(buf, n, p_mm, t1023_u);
-+	FM_DMP_V32(buf, n, p_mm, t1518_l);
-+	FM_DMP_V32(buf, n, p_mm, t1518_u);
-+	FM_DMP_V32(buf, n, p_mm, t1519x_l);
-+	FM_DMP_V32(buf, n, p_mm, t1519x_u);
-+	FM_DMP_V32(buf, n, p_mm, tcnp_l);
-+	FM_DMP_V32(buf, n, p_mm, tcnp_u);
-+
-+	return n;
-+}
-+
-+int fm_mac_dump_regs(struct mac_device *h_mac, char *buf, int nn)
-+{
-+	int	n = nn;
-+
-+	n = h_mac->dump_mac_regs(h_mac, buf, n);
-+
-+	return n;
-+}
-+EXPORT_SYMBOL(fm_mac_dump_regs);
-+
-+int fm_mac_dump_rx_stats(struct mac_device *h_mac, char *buf, int nn)
-+{
-+	int     n = nn;
-+
-+	if(h_mac->dump_mac_rx_stats)
-+		n = h_mac->dump_mac_rx_stats(h_mac, buf, n);
-+
-+	return n;
-+}
-+EXPORT_SYMBOL(fm_mac_dump_rx_stats);
-+
-+int fm_mac_dump_tx_stats(struct mac_device *h_mac, char *buf, int nn)
-+{
-+	int     n = nn;
-+
-+	if(h_mac->dump_mac_tx_stats)
-+		n = h_mac->dump_mac_tx_stats(h_mac, buf, n);
-+
-+	return n;
-+}
-+EXPORT_SYMBOL(fm_mac_dump_tx_stats);
-+
-+static void __cold setup_dtsec(struct mac_device *mac_dev)
-+{
-+	mac_dev->init_phy	= dtsec_init_phy;
-+	mac_dev->init		= init;
-+	mac_dev->start		= start;
-+	mac_dev->stop		= stop;
-+	mac_dev->set_promisc	= fm_mac_set_promiscuous;
-+	mac_dev->change_addr    = fm_mac_modify_mac_addr;
-+	mac_dev->set_multi      = set_multi;
-+	mac_dev->uninit		= uninit;
-+	mac_dev->ptp_enable		= fm_mac_enable_1588_time_stamp;
-+	mac_dev->ptp_disable		= fm_mac_disable_1588_time_stamp;
-+	mac_dev->get_mac_handle		= get_mac_handle;
-+	mac_dev->set_tx_pause		= fm_mac_set_tx_pause_frames;
-+	mac_dev->set_rx_pause		= fm_mac_set_rx_pause_frames;
-+	mac_dev->fm_rtc_enable		= fm_rtc_enable;
-+	mac_dev->fm_rtc_disable		= fm_rtc_disable;
-+	mac_dev->fm_rtc_get_cnt		= fm_rtc_get_cnt;
-+	mac_dev->fm_rtc_set_cnt		= fm_rtc_set_cnt;
-+	mac_dev->fm_rtc_get_drift	= fm_rtc_get_drift;
-+	mac_dev->fm_rtc_set_drift	= fm_rtc_set_drift;
-+	mac_dev->fm_rtc_set_alarm	= fm_rtc_set_alarm;
-+	mac_dev->fm_rtc_set_fiper	= fm_rtc_set_fiper;
-+	mac_dev->set_wol		= fm_mac_set_wol;
-+	mac_dev->dump_mac_regs		= dtsec_dump_regs;
-+}
-+
-+static void __cold setup_xgmac(struct mac_device *mac_dev)
-+{
-+	mac_dev->init_phy	= xgmac_init_phy;
-+	mac_dev->init		= init;
-+	mac_dev->start		= start;
-+	mac_dev->stop		= stop;
-+	mac_dev->set_promisc	= fm_mac_set_promiscuous;
-+	mac_dev->change_addr    = fm_mac_modify_mac_addr;
-+	mac_dev->set_multi      = set_multi;
-+	mac_dev->uninit		= uninit;
-+	mac_dev->get_mac_handle	= get_mac_handle;
-+	mac_dev->set_tx_pause	= fm_mac_set_tx_pause_frames;
-+	mac_dev->set_rx_pause	= fm_mac_set_rx_pause_frames;
-+	mac_dev->set_wol	= fm_mac_set_wol;
-+	mac_dev->dump_mac_regs	= xgmac_dump_regs;
-+}
-+
-+static void __cold setup_memac(struct mac_device *mac_dev)
-+{
-+	mac_dev->init_phy	= memac_init_phy;
-+	mac_dev->init		= memac_init;
-+	mac_dev->start		= start;
-+	mac_dev->stop		= stop;
-+	mac_dev->set_promisc	= fm_mac_set_promiscuous;
-+	mac_dev->change_addr    = fm_mac_modify_mac_addr;
-+	mac_dev->set_multi      = set_multi;
-+	mac_dev->uninit		= uninit;
-+	mac_dev->get_mac_handle		= get_mac_handle;
-+	mac_dev->set_tx_pause		= fm_mac_set_tx_pause_frames;
-+	mac_dev->set_rx_pause		= fm_mac_set_rx_pause_frames;
-+	mac_dev->fm_rtc_enable		= fm_rtc_enable;
-+	mac_dev->fm_rtc_disable		= fm_rtc_disable;
-+	mac_dev->fm_rtc_get_cnt		= fm_rtc_get_cnt;
-+	mac_dev->fm_rtc_set_cnt		= fm_rtc_set_cnt;
-+	mac_dev->fm_rtc_get_drift	= fm_rtc_get_drift;
-+	mac_dev->fm_rtc_set_drift	= fm_rtc_set_drift;
-+	mac_dev->fm_rtc_set_alarm	= fm_rtc_set_alarm;
-+	mac_dev->fm_rtc_set_fiper	= fm_rtc_set_fiper;
-+	mac_dev->set_wol		= fm_mac_set_wol;
-+	mac_dev->dump_mac_regs		= memac_dump_regs;
-+	mac_dev->dump_mac_rx_stats	= memac_dump_regs_rx;
-+	mac_dev->dump_mac_tx_stats	= memac_dump_regs_tx;
-+}
-+
-+void (*const mac_setup[])(struct mac_device *mac_dev) = {
-+	[DTSEC] = setup_dtsec,
-+	[XGMAC] = setup_xgmac,
-+	[MEMAC] = setup_memac
-+};
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac.c
-@@ -0,0 +1,486 @@
-+/* Copyright 2008-2012 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifdef CONFIG_FSL_DPAA_ETH_DEBUG
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": %s:%hu:%s() " fmt, \
-+	KBUILD_BASENAME".c", __LINE__, __func__
-+#else
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": " fmt
-+#endif
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/of_address.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+#include <linux/phy_fixed.h>
-+#include <linux/device.h>
-+#include <linux/phy.h>
-+#include <linux/io.h>
-+
-+#include "lnxwrp_fm_ext.h"
-+
-+#include "mac.h"
-+
-+#define DTSEC_SUPPORTED \
-+	(SUPPORTED_10baseT_Half \
-+	| SUPPORTED_10baseT_Full \
-+	| SUPPORTED_100baseT_Half \
-+	| SUPPORTED_100baseT_Full \
-+	| SUPPORTED_Autoneg \
-+	| SUPPORTED_Pause \
-+	| SUPPORTED_Asym_Pause \
-+	| SUPPORTED_MII)
-+
-+static const char phy_str[][11] = {
-+	[PHY_INTERFACE_MODE_MII]	= "mii",
-+	[PHY_INTERFACE_MODE_GMII]	= "gmii",
-+	[PHY_INTERFACE_MODE_SGMII]	= "sgmii",
-+	[PHY_INTERFACE_MODE_QSGMII]	= "qsgmii",
-+	[PHY_INTERFACE_MODE_TBI]	= "tbi",
-+	[PHY_INTERFACE_MODE_RMII]	= "rmii",
-+	[PHY_INTERFACE_MODE_RGMII]	= "rgmii",
-+	[PHY_INTERFACE_MODE_RGMII_ID]	= "rgmii-id",
-+	[PHY_INTERFACE_MODE_RGMII_RXID]	= "rgmii-rxid",
-+	[PHY_INTERFACE_MODE_RGMII_TXID]	= "rgmii-txid",
-+	[PHY_INTERFACE_MODE_RTBI]	= "rtbi",
-+	[PHY_INTERFACE_MODE_XGMII]	= "xgmii",
-+	[PHY_INTERFACE_MODE_SGMII_2500] = "sgmii-2500",
-+};
-+
-+static phy_interface_t __pure __attribute__((nonnull)) str2phy(const char *str)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(phy_str); i++)
-+		if (strcmp(str, phy_str[i]) == 0)
-+			return (phy_interface_t)i;
-+
-+	return PHY_INTERFACE_MODE_MII;
-+}
-+
-+static const uint16_t phy2speed[] = {
-+	[PHY_INTERFACE_MODE_MII]	= SPEED_100,
-+	[PHY_INTERFACE_MODE_GMII]	= SPEED_1000,
-+	[PHY_INTERFACE_MODE_SGMII]	= SPEED_1000,
-+	[PHY_INTERFACE_MODE_QSGMII]	= SPEED_1000,
-+	[PHY_INTERFACE_MODE_TBI]	= SPEED_1000,
-+	[PHY_INTERFACE_MODE_RMII]	= SPEED_100,
-+	[PHY_INTERFACE_MODE_RGMII]	= SPEED_1000,
-+	[PHY_INTERFACE_MODE_RGMII_ID]	= SPEED_1000,
-+	[PHY_INTERFACE_MODE_RGMII_RXID]	= SPEED_1000,
-+	[PHY_INTERFACE_MODE_RGMII_TXID]	= SPEED_1000,
-+	[PHY_INTERFACE_MODE_RTBI]	= SPEED_1000,
-+	[PHY_INTERFACE_MODE_XGMII]	= SPEED_10000,
-+	[PHY_INTERFACE_MODE_SGMII_2500] = SPEED_2500,
-+};
-+
-+static struct mac_device * __cold
-+alloc_macdev(struct device *dev, size_t sizeof_priv,
-+		void (*setup)(struct mac_device *mac_dev))
-+{
-+	struct mac_device	*mac_dev;
-+
-+	mac_dev = devm_kzalloc(dev, sizeof(*mac_dev) + sizeof_priv, GFP_KERNEL);
-+	if (unlikely(mac_dev == NULL))
-+		mac_dev = ERR_PTR(-ENOMEM);
-+	else {
-+		mac_dev->dev = dev;
-+		dev_set_drvdata(dev, mac_dev);
-+		setup(mac_dev);
-+	}
-+
-+	return mac_dev;
-+}
-+
-+static int __cold free_macdev(struct mac_device *mac_dev)
-+{
-+	dev_set_drvdata(mac_dev->dev, NULL);
-+
-+	return mac_dev->uninit(mac_dev->get_mac_handle(mac_dev));
-+}
-+
-+static const struct of_device_id mac_match[] = {
-+	[DTSEC] = {
-+		.compatible	= "fsl,fman-1g-mac"
-+	},
-+	[XGMAC] = {
-+		.compatible	= "fsl,fman-10g-mac"
-+	},
-+	[MEMAC] = {
-+		.compatible	= "fsl,fman-memac"
-+	},
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, mac_match);
-+
-+static int __cold mac_probe(struct platform_device *_of_dev)
-+{
-+	int			 _errno, i;
-+	struct device		*dev;
-+	struct device_node	*mac_node, *dev_node;
-+	struct mac_device	*mac_dev;
-+	struct platform_device	*of_dev;
-+	struct resource		 res;
-+	const char		*char_prop;
-+	int			nph;
-+	u32			cell_index;
-+	const struct of_device_id *match;
-+
-+	dev = &_of_dev->dev;
-+	mac_node = dev->of_node;
-+
-+	match = of_match_device(mac_match, dev);
-+	if (!match)
-+		return -EINVAL;
-+
-+	for (i = 0; i < ARRAY_SIZE(mac_match) - 1 && match != mac_match + i;
-+			i++)
-+		;
-+	BUG_ON(i >= ARRAY_SIZE(mac_match) - 1);
-+
-+	mac_dev = alloc_macdev(dev, mac_sizeof_priv[i], mac_setup[i]);
-+	if (IS_ERR(mac_dev)) {
-+		_errno = PTR_ERR(mac_dev);
-+		dev_err(dev, "alloc_macdev() = %d\n", _errno);
-+		goto _return;
-+	}
-+
-+	INIT_LIST_HEAD(&mac_dev->mc_addr_list);
-+
-+	/* Get the FM node */
-+	dev_node = of_get_parent(mac_node);
-+	if (unlikely(dev_node == NULL)) {
-+		dev_err(dev, "of_get_parent(%s) failed\n",
-+				mac_node->full_name);
-+		_errno = -EINVAL;
-+		goto _return_dev_set_drvdata;
-+	}
-+
-+	of_dev = of_find_device_by_node(dev_node);
-+	if (unlikely(of_dev == NULL)) {
-+		dev_err(dev, "of_find_device_by_node(%s) failed\n",
-+				dev_node->full_name);
-+		_errno = -EINVAL;
-+		goto _return_of_node_put;
-+	}
-+
-+	mac_dev->fm_dev = fm_bind(&of_dev->dev);
-+	if (unlikely(mac_dev->fm_dev == NULL)) {
-+		dev_err(dev, "fm_bind(%s) failed\n", dev_node->full_name);
-+		_errno = -ENODEV;
-+		goto _return_of_node_put;
-+	}
-+
-+	mac_dev->fm = (void *)fm_get_handle(mac_dev->fm_dev);
-+	of_node_put(dev_node);
-+
-+	/* Get the address of the memory mapped registers */
-+	_errno = of_address_to_resource(mac_node, 0, &res);
-+	if (unlikely(_errno < 0)) {
-+		dev_err(dev, "of_address_to_resource(%s) = %d\n",
-+				mac_node->full_name, _errno);
-+		goto _return_dev_set_drvdata;
-+	}
-+
-+	mac_dev->res = __devm_request_region(
-+		dev,
-+		fm_get_mem_region(mac_dev->fm_dev),
-+		res.start, res.end + 1 - res.start, "mac");
-+	if (unlikely(mac_dev->res == NULL)) {
-+		dev_err(dev, "__devm_request_mem_region(mac) failed\n");
-+		_errno = -EBUSY;
-+		goto _return_dev_set_drvdata;
-+	}
-+
-+	mac_dev->vaddr = devm_ioremap(dev, mac_dev->res->start,
-+				      mac_dev->res->end + 1
-+				      - mac_dev->res->start);
-+	if (unlikely(mac_dev->vaddr == NULL)) {
-+		dev_err(dev, "devm_ioremap() failed\n");
-+		_errno = -EIO;
-+		goto _return_dev_set_drvdata;
-+	}
-+
-+#define TBIPA_OFFSET		0x1c
-+#define TBIPA_DEFAULT_ADDR	5 /* override if used as external PHY addr. */
-+	mac_dev->tbi_node = of_parse_phandle(mac_node, "tbi-handle", 0);
-+	if (mac_dev->tbi_node) {
-+		u32 tbiaddr = TBIPA_DEFAULT_ADDR;
-+		const __be32 *tbi_reg;
-+		void __iomem *addr;
-+
-+		tbi_reg = of_get_property(mac_dev->tbi_node, "reg", NULL);
-+		if (tbi_reg)
-+			tbiaddr = be32_to_cpup(tbi_reg);
-+		addr = mac_dev->vaddr + TBIPA_OFFSET;
-+		/* TODO: out_be32 does not exist on ARM */
-+		out_be32(addr, tbiaddr);
-+	}
-+
-+	if (!of_device_is_available(mac_node)) {
-+		devm_iounmap(dev, mac_dev->vaddr);
-+		__devm_release_region(dev, fm_get_mem_region(mac_dev->fm_dev),
-+			res.start, res.end + 1 - res.start);
-+		fm_unbind(mac_dev->fm_dev);
-+		devm_kfree(dev, mac_dev);
-+		dev_set_drvdata(dev, NULL);
-+		return -ENODEV;
-+	}
-+
-+	/* Get the cell-index */
-+	_errno = of_property_read_u32(mac_node, "cell-index", &cell_index);
-+	if (unlikely(_errno)) {
-+		dev_err(dev, "Cannot read cell-index of mac node %s from device tree\n",
-+				mac_node->full_name);
-+		goto _return_dev_set_drvdata;
-+	}
-+	mac_dev->cell_index = (uint8_t)cell_index;
-+	if (mac_dev->cell_index >= 8)
-+		mac_dev->cell_index -= 8;
-+
-+	/* Get the MAC address */
-+	_errno = of_get_mac_address(mac_node, mac_dev->addr);
-+	if (unlikely(_errno)) {
-+		dev_err(dev, "of_get_mac_address(%s) failed\n",
-+				mac_node->full_name);
-+		goto _return_dev_set_drvdata;
-+	}
-+
-+	/* Verify the number of port handles */
-+	nph = of_count_phandle_with_args(mac_node, "fsl,fman-ports", NULL);
-+	if (unlikely(nph < 0)) {
-+		dev_err(dev, "Cannot read port handles of mac node %s from device tree\n",
-+				mac_node->full_name);
-+		_errno = nph;
-+		goto _return_dev_set_drvdata;
-+	}
-+
-+	if (nph != ARRAY_SIZE(mac_dev->port_dev)) {
-+		dev_err(dev, "Not supported number of port handles of mac node %s from device tree\n",
-+				mac_node->full_name);
-+		_errno = -EINVAL;
-+		goto _return_dev_set_drvdata;
-+	}
-+
-+	for_each_port_device(i, mac_dev->port_dev) {
-+		dev_node = of_parse_phandle(mac_node, "fsl,fman-ports", i);
-+		if (unlikely(dev_node == NULL)) {
-+			dev_err(dev, "Cannot find port node referenced by mac node %s from device tree\n",
-+					mac_node->full_name);
-+			_errno = -EINVAL;
-+			goto _return_of_node_put;
-+		}
-+
-+		of_dev = of_find_device_by_node(dev_node);
-+		if (unlikely(of_dev == NULL)) {
-+			dev_err(dev, "of_find_device_by_node(%s) failed\n",
-+					dev_node->full_name);
-+			_errno = -EINVAL;
-+			goto _return_of_node_put;
-+		}
-+
-+		mac_dev->port_dev[i] = fm_port_bind(&of_dev->dev);
-+		if (unlikely(mac_dev->port_dev[i] == NULL)) {
-+			dev_err(dev, "dev_get_drvdata(%s) failed\n",
-+					dev_node->full_name);
-+			_errno = -EINVAL;
-+			goto _return_of_node_put;
-+		}
-+		of_node_put(dev_node);
-+	}
-+
-+	/* Get the PHY connection type */
-+	_errno = of_property_read_string(mac_node, "phy-connection-type",
-+			&char_prop);
-+	if (unlikely(_errno)) {
-+		dev_warn(dev,
-+			 "Cannot read PHY connection type of mac node %s from device tree. Defaulting to MII\n",
-+			 mac_node->full_name);
-+		mac_dev->phy_if = PHY_INTERFACE_MODE_MII;
-+	} else
-+		mac_dev->phy_if = str2phy(char_prop);
-+
-+	mac_dev->link		= false;
-+	mac_dev->half_duplex	= false;
-+	mac_dev->speed		= phy2speed[mac_dev->phy_if];
-+	mac_dev->max_speed	= mac_dev->speed;
-+	mac_dev->if_support = DTSEC_SUPPORTED;
-+	/* We don't support half-duplex in SGMII mode */
-+	if (strstr(char_prop, "sgmii") || strstr(char_prop, "qsgmii") ||
-+	    strstr(char_prop, "sgmii-2500"))
-+		mac_dev->if_support &= ~(SUPPORTED_10baseT_Half |
-+					SUPPORTED_100baseT_Half);
-+
-+	/* Gigabit support (no half-duplex) */
-+	if (mac_dev->max_speed == SPEED_1000 ||
-+	    mac_dev->max_speed == SPEED_2500)
-+		mac_dev->if_support |= SUPPORTED_1000baseT_Full;
-+
-+	/* The 10G interface only supports one mode */
-+	if (strstr(char_prop, "xgmii"))
-+		mac_dev->if_support = SUPPORTED_10000baseT_Full;
-+
-+	/* Get the rest of the PHY information */
-+	mac_dev->phy_node = of_parse_phandle(mac_node, "phy-handle", 0);
-+	if (!mac_dev->phy_node) {
-+		struct phy_device *phy;
-+
-+		if (!of_phy_is_fixed_link(mac_node)) {
-+			dev_err(dev, "Wrong PHY information of mac node %s\n",
-+				mac_node->full_name);
-+			goto _return_dev_set_drvdata;
-+		}
-+
-+		_errno = of_phy_register_fixed_link(mac_node);
-+		if (_errno)
-+			goto _return_dev_set_drvdata;
-+
-+		mac_dev->fixed_link = devm_kzalloc(mac_dev->dev,
-+						   sizeof(*mac_dev->fixed_link),
-+						   GFP_KERNEL);
-+		if (!mac_dev->fixed_link)
-+			goto _return_dev_set_drvdata;
-+
-+		mac_dev->phy_node = of_node_get(mac_node);
-+		phy = of_phy_find_device(mac_dev->phy_node);
-+		if (!phy)
-+			goto _return_dev_set_drvdata;
-+
-+		mac_dev->fixed_link->link = phy->link;
-+		mac_dev->fixed_link->speed = phy->speed;
-+		mac_dev->fixed_link->duplex = phy->duplex;
-+		mac_dev->fixed_link->pause = phy->pause;
-+		mac_dev->fixed_link->asym_pause = phy->asym_pause;
-+	}
-+
-+	_errno = mac_dev->init(mac_dev);
-+	if (unlikely(_errno < 0)) {
-+		dev_err(dev, "mac_dev->init() = %d\n", _errno);
-+		goto _return_dev_set_drvdata;
-+	}
-+
-+	/* pause frame autonegotiation enabled*/
-+	mac_dev->autoneg_pause = true;
-+
-+	/* by intializing the values to false, force FMD to enable PAUSE frames
-+	 * on RX and TX
-+	 */
-+	mac_dev->rx_pause_req = mac_dev->tx_pause_req = true;
-+	mac_dev->rx_pause_active = mac_dev->tx_pause_active = false;
-+	_errno = set_mac_active_pause(mac_dev, true, true);
-+	if (unlikely(_errno < 0))
-+		dev_err(dev, "set_mac_active_pause() = %d\n", _errno);
-+
-+	dev_info(dev,
-+		"FMan MAC address: %02hx:%02hx:%02hx:%02hx:%02hx:%02hx\n",
-+		     mac_dev->addr[0], mac_dev->addr[1], mac_dev->addr[2],
-+		     mac_dev->addr[3], mac_dev->addr[4], mac_dev->addr[5]);
-+
-+	goto _return;
-+
-+_return_of_node_put:
-+	of_node_put(dev_node);
-+_return_dev_set_drvdata:
-+	dev_set_drvdata(dev, NULL);
-+_return:
-+	return _errno;
-+}
-+
-+static int __cold mac_remove(struct platform_device *of_dev)
-+{
-+	int			 i, _errno;
-+	struct device		*dev;
-+	struct mac_device	*mac_dev;
-+
-+	dev = &of_dev->dev;
-+	mac_dev = (struct mac_device *)dev_get_drvdata(dev);
-+
-+	for_each_port_device(i, mac_dev->port_dev)
-+		fm_port_unbind(mac_dev->port_dev[i]);
-+
-+	fm_unbind(mac_dev->fm_dev);
-+
-+	_errno = free_macdev(mac_dev);
-+
-+	return _errno;
-+}
-+
-+static struct platform_driver mac_driver = {
-+	.driver = {
-+		.name		= KBUILD_MODNAME,
-+		.of_match_table	= mac_match,
-+		.owner		= THIS_MODULE,
-+	},
-+	.probe		= mac_probe,
-+	.remove		= mac_remove
-+};
-+
-+static int __init __cold mac_load(void)
-+{
-+	int	 _errno;
-+
-+	pr_debug(KBUILD_MODNAME ": -> %s:%s()\n",
-+		KBUILD_BASENAME".c", __func__);
-+
-+	pr_info(KBUILD_MODNAME ": %s\n", mac_driver_description);
-+
-+	_errno = platform_driver_register(&mac_driver);
-+	if (unlikely(_errno < 0)) {
-+		pr_err(KBUILD_MODNAME ": %s:%hu:%s(): platform_driver_register() = %d\n",
-+			   KBUILD_BASENAME".c", __LINE__, __func__, _errno);
-+		goto _return;
-+	}
-+
-+	goto _return;
-+
-+_return:
-+	pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
-+		KBUILD_BASENAME".c", __func__);
-+
-+	return _errno;
-+}
-+module_init(mac_load);
-+
-+static void __exit __cold mac_unload(void)
-+{
-+	pr_debug(KBUILD_MODNAME ": -> %s:%s()\n",
-+		KBUILD_BASENAME".c", __func__);
-+
-+	platform_driver_unregister(&mac_driver);
-+
-+	pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
-+		KBUILD_BASENAME".c", __func__);
-+}
-+module_exit(mac_unload);
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac.h
-@@ -0,0 +1,135 @@
-+/* Copyright 2008-2011 Freescale Semiconductor, Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __MAC_H
-+#define __MAC_H
-+
-+#include <linux/device.h>	/* struct device, BUS_ID_SIZE */
-+#include <linux/if_ether.h>	/* ETH_ALEN */
-+#include <linux/phy.h>		/* phy_interface_t, struct phy_device */
-+#include <linux/list.h>
-+
-+#include "lnxwrp_fsl_fman.h"	/* struct port_device */
-+
-+enum {DTSEC, XGMAC, MEMAC};
-+
-+struct mac_device {
-+	struct device		*dev;
-+	void			*priv;
-+	uint8_t			 cell_index;
-+	struct resource		*res;
-+	void __iomem		*vaddr;
-+	uint8_t			 addr[ETH_ALEN];
-+	bool			 promisc;
-+
-+	struct fm		*fm_dev;
-+	struct fm_port		*port_dev[2];
-+
-+	phy_interface_t		 phy_if;
-+	u32			 if_support;
-+	bool			 link;
-+	bool			 half_duplex;
-+	uint16_t		 speed;
-+	uint16_t		 max_speed;
-+	struct device_node	*phy_node;
-+	char			 fixed_bus_id[MII_BUS_ID_SIZE + 3];
-+	struct device_node	*tbi_node;
-+	struct phy_device	*phy_dev;
-+	void			*fm;
-+	/* List of multicast addresses */
-+	struct list_head	 mc_addr_list;
-+	struct fixed_phy_status	 *fixed_link;
-+
-+	bool autoneg_pause;
-+	bool rx_pause_req;
-+	bool tx_pause_req;
-+	bool rx_pause_active;
-+	bool tx_pause_active;
-+
-+	struct fm_mac_dev *(*get_mac_handle)(struct mac_device *mac_dev);
-+	int (*init_phy)(struct net_device *net_dev, struct mac_device *mac_dev);
-+	int (*init)(struct mac_device *mac_dev);
-+	int (*start)(struct mac_device *mac_dev);
-+	int (*stop)(struct mac_device *mac_dev);
-+	int (*set_promisc)(struct fm_mac_dev *fm_mac_dev, bool enable);
-+	int (*change_addr)(struct fm_mac_dev *fm_mac_dev, uint8_t *addr);
-+	int (*set_multi)(struct net_device *net_dev,
-+			 struct mac_device *mac_dev);
-+	int (*uninit)(struct fm_mac_dev *fm_mac_dev);
-+	int (*ptp_enable)(struct fm_mac_dev *fm_mac_dev);
-+	int (*ptp_disable)(struct fm_mac_dev *fm_mac_dev);
-+	int (*set_rx_pause)(struct fm_mac_dev *fm_mac_dev, bool en);
-+	int (*set_tx_pause)(struct fm_mac_dev *fm_mac_dev, bool en);
-+	int (*fm_rtc_enable)(struct fm *fm_dev);
-+	int (*fm_rtc_disable)(struct fm *fm_dev);
-+	int (*fm_rtc_get_cnt)(struct fm *fm_dev, uint64_t *ts);
-+	int (*fm_rtc_set_cnt)(struct fm *fm_dev, uint64_t ts);
-+	int (*fm_rtc_get_drift)(struct fm *fm_dev, uint32_t *drift);
-+	int (*fm_rtc_set_drift)(struct fm *fm_dev, uint32_t drift);
-+	int (*fm_rtc_set_alarm)(struct fm *fm_dev, uint32_t id, uint64_t time);
-+	int (*fm_rtc_set_fiper)(struct fm *fm_dev, uint32_t id,
-+				uint64_t fiper);
-+#ifdef CONFIG_PTP_1588_CLOCK_DPAA
-+	int (*fm_rtc_enable_interrupt)(struct fm *fm_dev, uint32_t events);
-+	int (*fm_rtc_disable_interrupt)(struct fm *fm_dev, uint32_t events);
-+#endif
-+	int (*set_wol)(struct fm_port *port, struct fm_mac_dev *fm_mac_dev,
-+			bool en);
-+	int (*dump_mac_regs)(struct mac_device *h_mac, char *buf, int nn);
-+	int (*dump_mac_rx_stats)(struct mac_device *h_mac, char *buf, int nn);
-+	int (*dump_mac_tx_stats)(struct mac_device *h_mac, char *buf, int nn);
-+};
-+
-+struct mac_address {
-+	uint8_t addr[ETH_ALEN];
-+	struct list_head list;
-+};
-+
-+#define get_fm_handle(net_dev) \
-+	(((struct dpa_priv_s *)netdev_priv(net_dev))->mac_dev->fm_dev)
-+
-+#define for_each_port_device(i, port_dev)	\
-+	for (i = 0; i < ARRAY_SIZE(port_dev); i++)
-+
-+static inline __attribute((nonnull)) void *macdev_priv(
-+		const struct mac_device *mac_dev)
-+{
-+	return (void *)mac_dev + sizeof(*mac_dev);
-+}
-+
-+extern const char	*mac_driver_description;
-+extern const size_t	 mac_sizeof_priv[];
-+extern void (*const mac_setup[])(struct mac_device *mac_dev);
-+
-+int set_mac_active_pause(struct mac_device *mac_dev, bool rx, bool tx);
-+void get_pause_cfg(struct mac_device *mac_dev, bool *rx_pause, bool *tx_pause);
-+
-+#endif	/* __MAC_H */
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/offline_port.c
-@@ -0,0 +1,848 @@
-+/* Copyright 2011-2012 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/* Offline Parsing / Host Command port driver for FSL QorIQ FMan.
-+ * Validates device-tree configuration and sets up the offline ports.
-+ */
-+
-+#ifdef CONFIG_FSL_DPAA_ETH_DEBUG
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": %s:%hu:%s() " fmt, \
-+	KBUILD_BASENAME".c", __LINE__, __func__
-+#else
-+#define pr_fmt(fmt) \
-+	KBUILD_MODNAME ": " fmt
-+#endif
-+
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/fsl_qman.h>
-+
-+#include "offline_port.h"
-+#include "dpaa_eth.h"
-+#include "dpaa_eth_common.h"
-+
-+#define OH_MOD_DESCRIPTION	"FSL FMan Offline Parsing port driver"
-+/* Manip extra space and data alignment for fragmentation */
-+#define FRAG_MANIP_SPACE 128
-+#define FRAG_DATA_ALIGN 64
-+
-+
-+MODULE_LICENSE("Dual BSD/GPL");
-+MODULE_AUTHOR("Bogdan Hamciuc <bogdan.hamciuc@freescale.com>");
-+MODULE_DESCRIPTION(OH_MOD_DESCRIPTION);
-+
-+
-+static const struct of_device_id oh_port_match_table[] = {
-+	{
-+		.compatible	= "fsl,dpa-oh"
-+	},
-+	{
-+		.compatible	= "fsl,dpa-oh-shared"
-+	},
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, oh_port_match_table);
-+
-+#ifdef CONFIG_PM
-+
-+static int oh_suspend(struct device *dev)
-+{
-+	struct dpa_oh_config_s	*oh_config;
-+
-+	oh_config = dev_get_drvdata(dev);
-+	return fm_port_suspend(oh_config->oh_port);
-+}
-+
-+static int oh_resume(struct device *dev)
-+{
-+	struct dpa_oh_config_s	*oh_config;
-+
-+	oh_config = dev_get_drvdata(dev);
-+	return fm_port_resume(oh_config->oh_port);
-+}
-+
-+static const struct dev_pm_ops oh_pm_ops = {
-+	.suspend = oh_suspend,
-+	.resume = oh_resume,
-+};
-+
-+#define OH_PM_OPS (&oh_pm_ops)
-+
-+#else /* CONFIG_PM */
-+
-+#define OH_PM_OPS NULL
-+
-+#endif /* CONFIG_PM */
-+
-+/* Creates Frame Queues */
-+static uint32_t oh_fq_create(struct qman_fq *fq,
-+	uint32_t fq_id, uint16_t channel,
-+	uint16_t wq_id)
-+{
-+	struct qm_mcc_initfq fq_opts;
-+	uint32_t create_flags, init_flags;
-+	uint32_t ret = 0;
-+
-+	if (fq == NULL)
-+		return 1;
-+
-+	/* Set flags for FQ create */
-+	create_flags = QMAN_FQ_FLAG_LOCKED | QMAN_FQ_FLAG_TO_DCPORTAL;
-+
-+	/* Create frame queue */
-+	ret = qman_create_fq(fq_id, create_flags, fq);
-+	if (ret != 0)
-+		return 1;
-+
-+	/* Set flags for FQ init */
-+	init_flags = QMAN_INITFQ_FLAG_SCHED;
-+
-+	/* Set FQ init options. Specify destination WQ ID and channel */
-+	fq_opts.we_mask = QM_INITFQ_WE_DESTWQ;
-+	fq_opts.fqd.dest.wq = wq_id;
-+	fq_opts.fqd.dest.channel = channel;
-+
-+	/* Initialize frame queue */
-+	ret = qman_init_fq(fq, init_flags, &fq_opts);
-+	if (ret != 0) {
-+		qman_destroy_fq(fq, 0);
-+		return 1;
-+	}
-+
-+	return 0;
-+}
-+
-+static void dump_fq(struct device *dev, int fqid, uint16_t channel)
-+{
-+	if (channel) {
-+		/* display fqs with a valid (!= 0) destination channel */
-+		dev_info(dev, "FQ ID:%d Channel ID:%d\n", fqid, channel);
-+	}
-+}
-+
-+static void dump_fq_duple(struct device *dev, struct qman_fq *fqs,
-+		int fqs_count, uint16_t channel_id)
-+{
-+	int i;
-+	for (i = 0; i < fqs_count; i++)
-+		dump_fq(dev, (fqs + i)->fqid, channel_id);
-+}
-+
-+static void dump_oh_config(struct device *dev, struct dpa_oh_config_s *conf)
-+{
-+	struct list_head *fq_list;
-+	struct fq_duple *fqd;
-+	int i;
-+
-+	dev_info(dev, "Default egress frame queue: %d\n", conf->default_fqid);
-+	dev_info(dev, "Default error frame queue: %d\n", conf->error_fqid);
-+
-+	/* TX queues (old initialization) */
-+	dev_info(dev, "Initialized queues:");
-+	for (i = 0; i < conf->egress_cnt; i++)
-+		dump_fq_duple(dev, conf->egress_fqs, conf->egress_cnt,
-+				conf->channel);
-+
-+	/* initialized ingress queues */
-+	list_for_each(fq_list, &conf->fqs_ingress_list) {
-+		fqd = list_entry(fq_list, struct fq_duple, fq_list);
-+		dump_fq_duple(dev, fqd->fqs, fqd->fqs_count, fqd->channel_id);
-+	}
-+
-+	/* initialized egress queues */
-+	list_for_each(fq_list, &conf->fqs_egress_list) {
-+		fqd = list_entry(fq_list, struct fq_duple, fq_list);
-+		dump_fq_duple(dev, fqd->fqs, fqd->fqs_count, fqd->channel_id);
-+	}
-+}
-+
-+/* Destroys Frame Queues */
-+static void oh_fq_destroy(struct qman_fq *fq)
-+{
-+	int _errno = 0;
-+
-+	_errno = qman_retire_fq(fq, NULL);
-+	if (unlikely(_errno < 0))
-+		pr_err(KBUILD_MODNAME": %s:%hu:%s(): qman_retire_fq(%u)=%d\n",
-+			KBUILD_BASENAME".c", __LINE__, __func__,
-+			qman_fq_fqid(fq), _errno);
-+
-+	_errno = qman_oos_fq(fq);
-+	if (unlikely(_errno < 0)) {
-+		pr_err(KBUILD_MODNAME": %s:%hu:%s(): qman_oos_fq(%u)=%d\n",
-+			KBUILD_BASENAME".c", __LINE__, __func__,
-+			qman_fq_fqid(fq), _errno);
-+	}
-+
-+	qman_destroy_fq(fq, 0);
-+}
-+
-+/* Allocation code for the OH port's PCD frame queues */
-+static int __cold oh_alloc_pcd_fqids(struct device *dev,
-+	uint32_t num,
-+	uint8_t alignment,
-+	uint32_t *base_fqid)
-+{
-+	dev_crit(dev, "callback not implemented!\n");
-+	BUG();
-+
-+	return 0;
-+}
-+
-+static int __cold oh_free_pcd_fqids(struct device *dev, uint32_t base_fqid)
-+{
-+	dev_crit(dev, "callback not implemented!\n");
-+	BUG();
-+
-+	return 0;
-+}
-+
-+static void oh_set_buffer_layout(struct fm_port *port,
-+				 struct dpa_buffer_layout_s *layout)
-+{
-+	struct fm_port_params params;
-+
-+	layout->priv_data_size = DPA_TX_PRIV_DATA_SIZE;
-+	layout->parse_results = true;
-+	layout->hash_results = true;
-+	layout->time_stamp = false;
-+
-+	fm_port_get_buff_layout_ext_params(port, &params);
-+	layout->manip_extra_space = params.manip_extra_space;
-+	layout->data_align = params.data_align;
-+}
-+
-+static int
-+oh_port_probe(struct platform_device *_of_dev)
-+{
-+	struct device *dpa_oh_dev;
-+	struct device_node *dpa_oh_node;
-+	int lenp, _errno = 0, fq_idx, duple_idx;
-+	int n_size, i, j, ret, duples_count;
-+	struct platform_device *oh_of_dev;
-+	struct device_node *oh_node, *bpool_node = NULL, *root_node;
-+	struct device *oh_dev;
-+	struct dpa_oh_config_s *oh_config = NULL;
-+	const __be32 *oh_all_queues;
-+	const __be32 *channel_ids;
-+	const __be32 *oh_tx_queues;
-+	uint32_t queues_count;
-+	uint32_t crt_fqid_base;
-+	uint32_t crt_fq_count;
-+	bool frag_enabled = false;
-+	struct fm_port_params oh_port_tx_params;
-+	struct fm_port_pcd_param oh_port_pcd_params;
-+	struct dpa_buffer_layout_s buf_layout;
-+
-+	/* True if the current partition owns the OH port. */
-+	bool init_oh_port;
-+
-+	const struct of_device_id *match;
-+	int crt_ext_pools_count;
-+	u32 ext_pool_size;
-+	u32 port_id;
-+	u32 channel_id;
-+
-+	int channel_ids_count;
-+	int channel_idx;
-+	struct fq_duple *fqd;
-+	struct list_head *fq_list, *fq_list_tmp;
-+
-+	const __be32 *bpool_cfg;
-+	uint32_t bpid;
-+
-+	memset(&oh_port_tx_params, 0, sizeof(oh_port_tx_params));
-+	dpa_oh_dev = &_of_dev->dev;
-+	dpa_oh_node = dpa_oh_dev->of_node;
-+	BUG_ON(dpa_oh_node == NULL);
-+
-+	match = of_match_device(oh_port_match_table, dpa_oh_dev);
-+	if (!match)
-+		return -EINVAL;
-+
-+	dev_dbg(dpa_oh_dev, "Probing OH port...\n");
-+
-+	/* Find the referenced OH node */
-+	oh_node = of_parse_phandle(dpa_oh_node, "fsl,fman-oh-port", 0);
-+	if (oh_node == NULL) {
-+		dev_err(dpa_oh_dev,
-+			"Can't find OH node referenced from node %s\n",
-+			dpa_oh_node->full_name);
-+		return -EINVAL;
-+	}
-+	dev_info(dpa_oh_dev, "Found OH node handle compatible with %s\n",
-+		match->compatible);
-+
-+	_errno = of_property_read_u32(oh_node, "cell-index", &port_id);
-+	if (_errno) {
-+		dev_err(dpa_oh_dev, "No port id found in node %s\n",
-+			dpa_oh_node->full_name);
-+		goto return_kfree;
-+	}
-+
-+	_errno = of_property_read_u32(oh_node, "fsl,qman-channel-id",
-+			&channel_id);
-+	if (_errno) {
-+		dev_err(dpa_oh_dev, "No channel id found in node %s\n",
-+			dpa_oh_node->full_name);
-+		goto return_kfree;
-+	}
-+
-+	oh_of_dev = of_find_device_by_node(oh_node);
-+	BUG_ON(oh_of_dev == NULL);
-+	oh_dev = &oh_of_dev->dev;
-+
-+	/* The OH port must be initialized exactly once.
-+	 * The following scenarios are of interest:
-+	 *	- the node is Linux-private (will always initialize it);
-+	 *	- the node is shared between two Linux partitions
-+	 *	  (only one of them will initialize it);
-+	 *	- the node is shared between a Linux and a LWE partition
-+	 *	  (Linux will initialize it) - "fsl,dpa-oh-shared"
-+	 */
-+
-+	/* Check if the current partition owns the OH port
-+	 * and ought to initialize it. It may be the case that we leave this
-+	 * to another (also Linux) partition.
-+	 */
-+	init_oh_port = strcmp(match->compatible, "fsl,dpa-oh-shared");
-+
-+	/* If we aren't the "owner" of the OH node, we're done here. */
-+	if (!init_oh_port) {
-+		dev_dbg(dpa_oh_dev,
-+			"Not owning the shared OH port %s, will not initialize it.\n",
-+			oh_node->full_name);
-+		of_node_put(oh_node);
-+		return 0;
-+	}
-+
-+	/* Allocate OH dev private data */
-+	oh_config = devm_kzalloc(dpa_oh_dev, sizeof(*oh_config), GFP_KERNEL);
-+	if (oh_config == NULL) {
-+		dev_err(dpa_oh_dev,
-+			"Can't allocate private data for OH node %s referenced from node %s!\n",
-+			oh_node->full_name, dpa_oh_node->full_name);
-+		_errno = -ENOMEM;
-+		goto return_kfree;
-+	}
-+
-+	INIT_LIST_HEAD(&oh_config->fqs_ingress_list);
-+	INIT_LIST_HEAD(&oh_config->fqs_egress_list);
-+
-+	/* FQs that enter OH port */
-+	lenp = 0;
-+	oh_all_queues = of_get_property(dpa_oh_node,
-+		"fsl,qman-frame-queues-ingress", &lenp);
-+	if (lenp % (2 * sizeof(*oh_all_queues))) {
-+		dev_warn(dpa_oh_dev,
-+			"Wrong ingress queues format for OH node %s referenced from node %s!\n",
-+			oh_node->full_name, dpa_oh_node->full_name);
-+		/* just ignore the last unpaired value */
-+	}
-+
-+	duples_count = lenp / (2 * sizeof(*oh_all_queues));
-+	dev_err(dpa_oh_dev, "Allocating %d ingress frame queues duples\n",
-+			duples_count);
-+	for (duple_idx = 0; duple_idx < duples_count; duple_idx++) {
-+		crt_fqid_base = be32_to_cpu(oh_all_queues[2 * duple_idx]);
-+		crt_fq_count = be32_to_cpu(oh_all_queues[2 * duple_idx + 1]);
-+
-+		fqd = devm_kzalloc(dpa_oh_dev,
-+				sizeof(struct fq_duple), GFP_KERNEL);
-+		if (!fqd) {
-+			dev_err(dpa_oh_dev, "Can't allocate structures for ingress frame queues for OH node %s referenced from node %s!\n",
-+					oh_node->full_name,
-+					dpa_oh_node->full_name);
-+			_errno = -ENOMEM;
-+			goto return_kfree;
-+		}
-+
-+		fqd->fqs = devm_kzalloc(dpa_oh_dev,
-+				crt_fq_count * sizeof(struct qman_fq),
-+				GFP_KERNEL);
-+		if (!fqd->fqs) {
-+			dev_err(dpa_oh_dev, "Can't allocate structures for ingress frame queues for OH node %s referenced from node %s!\n",
-+					oh_node->full_name,
-+					dpa_oh_node->full_name);
-+			_errno = -ENOMEM;
-+			goto return_kfree;
-+		}
-+
-+		for (j = 0; j < crt_fq_count; j++)
-+			(fqd->fqs + j)->fqid = crt_fqid_base + j;
-+		fqd->fqs_count = crt_fq_count;
-+		fqd->channel_id = (uint16_t)channel_id;
-+		list_add(&fqd->fq_list, &oh_config->fqs_ingress_list);
-+	}
-+
-+	/* create the ingress queues */
-+	list_for_each(fq_list, &oh_config->fqs_ingress_list) {
-+		fqd = list_entry(fq_list, struct fq_duple, fq_list);
-+
-+		for (j = 0; j < fqd->fqs_count; j++) {
-+			ret = oh_fq_create(fqd->fqs + j,
-+					(fqd->fqs + j)->fqid,
-+					fqd->channel_id, 3);
-+			if (ret != 0) {
-+				dev_err(dpa_oh_dev, "Unable to create ingress frame queue %d for OH node %s referenced from node %s!\n",
-+						(fqd->fqs + j)->fqid,
-+						oh_node->full_name,
-+						dpa_oh_node->full_name);
-+				_errno = -EINVAL;
-+				goto return_kfree;
-+			}
-+		}
-+	}
-+
-+	/* FQs that exit OH port */
-+	lenp = 0;
-+	oh_all_queues = of_get_property(dpa_oh_node,
-+		"fsl,qman-frame-queues-egress", &lenp);
-+	if (lenp % (2 * sizeof(*oh_all_queues))) {
-+		dev_warn(dpa_oh_dev,
-+			"Wrong egress queues format for OH node %s referenced from node %s!\n",
-+			oh_node->full_name, dpa_oh_node->full_name);
-+		/* just ignore the last unpaired value */
-+	}
-+
-+	duples_count = lenp / (2 * sizeof(*oh_all_queues));
-+	dev_dbg(dpa_oh_dev, "Allocating %d egress frame queues duples\n",
-+			duples_count);
-+	for (duple_idx = 0; duple_idx < duples_count; duple_idx++) {
-+		crt_fqid_base = be32_to_cpu(oh_all_queues[2 * duple_idx]);
-+		crt_fq_count = be32_to_cpu(oh_all_queues[2 * duple_idx + 1]);
-+
-+		fqd = devm_kzalloc(dpa_oh_dev,
-+				sizeof(struct fq_duple), GFP_KERNEL);
-+		if (!fqd) {
-+			dev_err(dpa_oh_dev, "Can't allocate structures for egress frame queues for OH node %s referenced from node %s!\n",
-+					oh_node->full_name,
-+					dpa_oh_node->full_name);
-+			_errno = -ENOMEM;
-+			goto return_kfree;
-+		}
-+
-+		fqd->fqs = devm_kzalloc(dpa_oh_dev,
-+				crt_fq_count * sizeof(struct qman_fq),
-+				GFP_KERNEL);
-+		if (!fqd->fqs) {
-+			dev_err(dpa_oh_dev,
-+					"Can't allocate structures for egress frame queues for OH node %s referenced from node %s!\n",
-+					oh_node->full_name,
-+					dpa_oh_node->full_name);
-+			_errno = -ENOMEM;
-+			goto return_kfree;
-+		}
-+
-+		for (j = 0; j < crt_fq_count; j++)
-+			(fqd->fqs + j)->fqid = crt_fqid_base + j;
-+		fqd->fqs_count = crt_fq_count;
-+		/* channel ID is specified in another attribute */
-+		fqd->channel_id = 0;
-+		list_add_tail(&fqd->fq_list, &oh_config->fqs_egress_list);
-+
-+		/* allocate the queue */
-+
-+	}
-+
-+	/* channel_ids for FQs that exit OH port */
-+	lenp = 0;
-+	channel_ids = of_get_property(dpa_oh_node,
-+		"fsl,qman-channel-ids-egress", &lenp);
-+
-+	channel_ids_count = lenp / (sizeof(*channel_ids));
-+	if (channel_ids_count != duples_count) {
-+		dev_warn(dpa_oh_dev,
-+			"Not all egress queues have a channel id for OH node %s referenced from node %s!\n",
-+			oh_node->full_name, dpa_oh_node->full_name);
-+		/* just ignore the queues that do not have a Channel ID */
-+	}
-+
-+	channel_idx = 0;
-+	list_for_each(fq_list, &oh_config->fqs_egress_list) {
-+		if (channel_idx + 1 > channel_ids_count)
-+			break;
-+		fqd = list_entry(fq_list, struct fq_duple, fq_list);
-+		fqd->channel_id =
-+			(uint16_t)be32_to_cpu(channel_ids[channel_idx++]);
-+	}
-+
-+	/* create egress queues */
-+	list_for_each(fq_list, &oh_config->fqs_egress_list) {
-+		fqd = list_entry(fq_list, struct fq_duple, fq_list);
-+
-+		if (fqd->channel_id == 0) {
-+			/* missing channel id in dts */
-+			continue;
-+		}
-+
-+		for (j = 0; j < fqd->fqs_count; j++) {
-+			ret = oh_fq_create(fqd->fqs + j,
-+					(fqd->fqs + j)->fqid,
-+					fqd->channel_id, 3);
-+			if (ret != 0) {
-+				dev_err(dpa_oh_dev, "Unable to create egress frame queue %d for OH node %s referenced from node %s!\n",
-+						(fqd->fqs + j)->fqid,
-+						oh_node->full_name,
-+						dpa_oh_node->full_name);
-+				_errno = -EINVAL;
-+				goto return_kfree;
-+			}
-+		}
-+	}
-+
-+	/* Read FQ ids/nums for the DPA OH node */
-+	oh_all_queues = of_get_property(dpa_oh_node,
-+		"fsl,qman-frame-queues-oh", &lenp);
-+	if (oh_all_queues == NULL) {
-+		dev_err(dpa_oh_dev,
-+			"No frame queues have been defined for OH node %s referenced from node %s\n",
-+			oh_node->full_name, dpa_oh_node->full_name);
-+		_errno = -EINVAL;
-+		goto return_kfree;
-+	}
-+
-+	/* Check that the OH error and default FQs are there */
-+	BUG_ON(lenp % (2 * sizeof(*oh_all_queues)));
-+	queues_count = lenp / (2 * sizeof(*oh_all_queues));
-+	if (queues_count != 2) {
-+		dev_err(dpa_oh_dev,
-+			"Error and Default queues must be defined for OH node %s referenced from node %s\n",
-+			oh_node->full_name, dpa_oh_node->full_name);
-+		_errno = -EINVAL;
-+		goto return_kfree;
-+	}
-+
-+	/* Read the FQIDs defined for this OH port */
-+	dev_dbg(dpa_oh_dev, "Reading %d queues...\n", queues_count);
-+	fq_idx = 0;
-+
-+	/* Error FQID - must be present */
-+	crt_fqid_base = be32_to_cpu(oh_all_queues[fq_idx++]);
-+	crt_fq_count = be32_to_cpu(oh_all_queues[fq_idx++]);
-+	if (crt_fq_count != 1) {
-+		dev_err(dpa_oh_dev,
-+			"Only 1 Error FQ allowed in OH node %s referenced from node %s (read: %d FQIDs).\n",
-+			oh_node->full_name, dpa_oh_node->full_name,
-+			crt_fq_count);
-+		_errno = -EINVAL;
-+		goto return_kfree;
-+	}
-+	oh_config->error_fqid = crt_fqid_base;
-+	dev_dbg(dpa_oh_dev, "Read Error FQID 0x%x for OH port %s.\n",
-+		oh_config->error_fqid, oh_node->full_name);
-+
-+	/* Default FQID - must be present */
-+	crt_fqid_base = be32_to_cpu(oh_all_queues[fq_idx++]);
-+	crt_fq_count = be32_to_cpu(oh_all_queues[fq_idx++]);
-+	if (crt_fq_count != 1) {
-+		dev_err(dpa_oh_dev,
-+			"Only 1 Default FQ allowed in OH node %s referenced from %s (read: %d FQIDs).\n",
-+			oh_node->full_name, dpa_oh_node->full_name,
-+			crt_fq_count);
-+		_errno = -EINVAL;
-+		goto return_kfree;
-+	}
-+	oh_config->default_fqid = crt_fqid_base;
-+	dev_dbg(dpa_oh_dev, "Read Default FQID 0x%x for OH port %s.\n",
-+		oh_config->default_fqid, oh_node->full_name);
-+
-+	/* TX FQID - presence is optional */
-+	oh_tx_queues = of_get_property(dpa_oh_node, "fsl,qman-frame-queues-tx",
-+			&lenp);
-+	if (oh_tx_queues == NULL) {
-+		dev_dbg(dpa_oh_dev,
-+			"No tx queues have been defined for OH node %s referenced from node %s\n",
-+			oh_node->full_name, dpa_oh_node->full_name);
-+		goto config_port;
-+	}
-+
-+	/* Check that queues-tx has only a base and a count defined */
-+	BUG_ON(lenp % (2 * sizeof(*oh_tx_queues)));
-+	queues_count = lenp / (2 * sizeof(*oh_tx_queues));
-+	if (queues_count != 1) {
-+		dev_err(dpa_oh_dev,
-+			"TX queues must be defined in only one <base count> tuple for OH node %s referenced from node %s\n",
-+			oh_node->full_name, dpa_oh_node->full_name);
-+		_errno = -EINVAL;
-+		goto return_kfree;
-+	}
-+
-+	fq_idx = 0;
-+	crt_fqid_base = be32_to_cpu(oh_tx_queues[fq_idx++]);
-+	crt_fq_count = be32_to_cpu(oh_tx_queues[fq_idx++]);
-+	oh_config->egress_cnt = crt_fq_count;
-+
-+	/* Allocate TX queues */
-+	dev_dbg(dpa_oh_dev, "Allocating %d queues for TX...\n", crt_fq_count);
-+	oh_config->egress_fqs = devm_kzalloc(dpa_oh_dev,
-+		crt_fq_count * sizeof(struct qman_fq), GFP_KERNEL);
-+	if (oh_config->egress_fqs == NULL) {
-+		dev_err(dpa_oh_dev,
-+			"Can't allocate private data for TX queues for OH node %s referenced from node %s!\n",
-+			oh_node->full_name, dpa_oh_node->full_name);
-+		_errno = -ENOMEM;
-+		goto return_kfree;
-+	}
-+
-+	/* Create TX queues */
-+	for (i = 0; i < crt_fq_count; i++) {
-+		ret = oh_fq_create(oh_config->egress_fqs + i,
-+			crt_fqid_base + i, (uint16_t)channel_id, 3);
-+		if (ret != 0) {
-+			dev_err(dpa_oh_dev,
-+				"Unable to create TX frame queue %d for OH node %s referenced from node %s!\n",
-+				crt_fqid_base + i, oh_node->full_name,
-+				dpa_oh_node->full_name);
-+			_errno = -EINVAL;
-+			goto return_kfree;
-+		}
-+	}
-+
-+config_port:
-+	/* Get a handle to the fm_port so we can set
-+	 * its configuration params
-+	 */
-+	oh_config->oh_port = fm_port_bind(oh_dev);
-+	if (oh_config->oh_port == NULL) {
-+		dev_err(dpa_oh_dev, "NULL drvdata from fm port dev %s!\n",
-+			oh_node->full_name);
-+		_errno = -EINVAL;
-+		goto return_kfree;
-+	}
-+
-+	oh_set_buffer_layout(oh_config->oh_port, &buf_layout);
-+
-+	/* read the pool handlers */
-+	crt_ext_pools_count = of_count_phandle_with_args(dpa_oh_node,
-+			"fsl,bman-buffer-pools", NULL);
-+	if (crt_ext_pools_count <= 0) {
-+		dev_info(dpa_oh_dev,
-+			 "OH port %s has no buffer pool. Fragmentation will not be enabled\n",
-+			oh_node->full_name);
-+		goto init_port;
-+	}
-+
-+	/* used for reading ext_pool_size*/
-+	root_node = of_find_node_by_path("/");
-+	if (root_node == NULL) {
-+		dev_err(dpa_oh_dev, "of_find_node_by_path(/) failed\n");
-+		_errno = -EINVAL;
-+		goto return_kfree;
-+	}
-+
-+	n_size = of_n_size_cells(root_node);
-+	of_node_put(root_node);
-+
-+	dev_dbg(dpa_oh_dev, "OH port number of pools = %d\n",
-+			crt_ext_pools_count);
-+
-+	oh_port_tx_params.num_pools = (uint8_t)crt_ext_pools_count;
-+
-+	for (i = 0; i < crt_ext_pools_count; i++) {
-+		bpool_node = of_parse_phandle(dpa_oh_node,
-+				"fsl,bman-buffer-pools", i);
-+		if (bpool_node == NULL) {
-+			dev_err(dpa_oh_dev, "Invalid Buffer pool node\n");
-+			_errno = -EINVAL;
-+			goto return_kfree;
-+		}
-+
-+		_errno = of_property_read_u32(bpool_node, "fsl,bpid", &bpid);
-+		if (_errno) {
-+			dev_err(dpa_oh_dev, "Invalid Buffer Pool ID\n");
-+			_errno = -EINVAL;
-+			goto return_kfree;
-+		}
-+
-+		oh_port_tx_params.pool_param[i].id = (uint8_t)bpid;
-+		dev_dbg(dpa_oh_dev, "OH port bpool id = %u\n", bpid);
-+
-+		bpool_cfg = of_get_property(bpool_node,
-+				"fsl,bpool-ethernet-cfg", &lenp);
-+		if (bpool_cfg == NULL) {
-+			dev_err(dpa_oh_dev, "Invalid Buffer pool config params\n");
-+			_errno = -EINVAL;
-+			goto return_kfree;
-+		}
-+
-+		ext_pool_size = of_read_number(bpool_cfg + n_size, n_size);
-+		oh_port_tx_params.pool_param[i].size = (uint16_t)ext_pool_size;
-+		dev_dbg(dpa_oh_dev, "OH port bpool size = %u\n",
-+			ext_pool_size);
-+		of_node_put(bpool_node);
-+
-+	}
-+
-+	if (buf_layout.data_align != FRAG_DATA_ALIGN ||
-+	    buf_layout.manip_extra_space != FRAG_MANIP_SPACE)
-+		goto init_port;
-+
-+	frag_enabled = true;
-+	dev_info(dpa_oh_dev, "IP Fragmentation enabled for OH port %d",
-+			port_id);
-+
-+init_port:
-+	of_node_put(oh_node);
-+	/* Set Tx params */
-+	dpaa_eth_init_port(tx, oh_config->oh_port, oh_port_tx_params,
-+		oh_config->error_fqid, oh_config->default_fqid, (&buf_layout),
-+		frag_enabled);
-+	/* Set PCD params */
-+	oh_port_pcd_params.cba = oh_alloc_pcd_fqids;
-+	oh_port_pcd_params.cbf = oh_free_pcd_fqids;
-+	oh_port_pcd_params.dev = dpa_oh_dev;
-+	fm_port_pcd_bind(oh_config->oh_port, &oh_port_pcd_params);
-+
-+	dev_set_drvdata(dpa_oh_dev, oh_config);
-+
-+	/* Enable the OH port */
-+	_errno = fm_port_enable(oh_config->oh_port);
-+	if (_errno)
-+		goto return_kfree;
-+
-+	dev_info(dpa_oh_dev, "OH port %s enabled.\n", oh_node->full_name);
-+
-+	/* print of all referenced & created queues */
-+	dump_oh_config(dpa_oh_dev, oh_config);
-+
-+	return 0;
-+
-+return_kfree:
-+	if (bpool_node)
-+		of_node_put(bpool_node);
-+	if (oh_node)
-+		of_node_put(oh_node);
-+	if (oh_config && oh_config->egress_fqs)
-+		devm_kfree(dpa_oh_dev, oh_config->egress_fqs);
-+
-+	list_for_each_safe(fq_list, fq_list_tmp, &oh_config->fqs_ingress_list) {
-+		fqd = list_entry(fq_list, struct fq_duple, fq_list);
-+		list_del(fq_list);
-+		devm_kfree(dpa_oh_dev, fqd->fqs);
-+		devm_kfree(dpa_oh_dev, fqd);
-+	}
-+
-+	list_for_each_safe(fq_list, fq_list_tmp, &oh_config->fqs_egress_list) {
-+		fqd = list_entry(fq_list, struct fq_duple, fq_list);
-+		list_del(fq_list);
-+		devm_kfree(dpa_oh_dev, fqd->fqs);
-+		devm_kfree(dpa_oh_dev, fqd);
-+	}
-+
-+	devm_kfree(dpa_oh_dev, oh_config);
-+	return _errno;
-+}
-+
-+static int __cold oh_port_remove(struct platform_device *_of_dev)
-+{
-+	int _errno = 0, i;
-+	struct dpa_oh_config_s *oh_config;
-+
-+	pr_info("Removing OH port...\n");
-+
-+	oh_config = dev_get_drvdata(&_of_dev->dev);
-+	if (oh_config == NULL) {
-+		pr_err(KBUILD_MODNAME
-+			": %s:%hu:%s(): No OH config in device private data!\n",
-+			KBUILD_BASENAME".c", __LINE__, __func__);
-+		_errno = -ENODEV;
-+		goto return_error;
-+	}
-+
-+	if (oh_config->egress_fqs)
-+		for (i = 0; i < oh_config->egress_cnt; i++)
-+			oh_fq_destroy(oh_config->egress_fqs + i);
-+
-+	if (oh_config->oh_port == NULL) {
-+		pr_err(KBUILD_MODNAME
-+			": %s:%hu:%s(): No fm port in device private data!\n",
-+			KBUILD_BASENAME".c", __LINE__, __func__);
-+		_errno = -EINVAL;
-+		goto free_egress_fqs;
-+	}
-+
-+	_errno = fm_port_disable(oh_config->oh_port);
-+
-+free_egress_fqs:
-+	if (oh_config->egress_fqs)
-+		devm_kfree(&_of_dev->dev, oh_config->egress_fqs);
-+	devm_kfree(&_of_dev->dev, oh_config);
-+	dev_set_drvdata(&_of_dev->dev, NULL);
-+
-+return_error:
-+	return _errno;
-+}
-+
-+static struct platform_driver oh_port_driver = {
-+	.driver = {
-+		.name		= KBUILD_MODNAME,
-+		.of_match_table	= oh_port_match_table,
-+		.owner		= THIS_MODULE,
-+		.pm		= OH_PM_OPS,
-+	},
-+	.probe		= oh_port_probe,
-+	.remove		= oh_port_remove
-+};
-+
-+static int __init __cold oh_port_load(void)
-+{
-+	int _errno;
-+
-+	pr_info(OH_MOD_DESCRIPTION "\n");
-+
-+	_errno = platform_driver_register(&oh_port_driver);
-+	if (_errno < 0) {
-+		pr_err(KBUILD_MODNAME
-+			": %s:%hu:%s(): platform_driver_register() = %d\n",
-+			KBUILD_BASENAME".c", __LINE__, __func__, _errno);
-+	}
-+
-+	pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
-+		KBUILD_BASENAME".c", __func__);
-+	return _errno;
-+}
-+module_init(oh_port_load);
-+
-+static void __exit __cold oh_port_unload(void)
-+{
-+	pr_debug(KBUILD_MODNAME ": -> %s:%s()\n",
-+		KBUILD_BASENAME".c", __func__);
-+
-+	platform_driver_unregister(&oh_port_driver);
-+
-+	pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
-+		KBUILD_BASENAME".c", __func__);
-+}
-+module_exit(oh_port_unload);
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/offline_port.h
-@@ -0,0 +1,59 @@
-+/* Copyright 2011 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __OFFLINE_PORT_H
-+#define __OFFLINE_PORT_H
-+
-+struct fm_port;
-+struct qman_fq;
-+
-+/* fqs are defined in duples (base_fq, fq_count) */
-+struct fq_duple {
-+	struct qman_fq *fqs;
-+	int fqs_count;
-+	uint16_t channel_id;
-+	struct list_head fq_list;
-+};
-+
-+/* OH port configuration */
-+struct dpa_oh_config_s {
-+	uint32_t		error_fqid;
-+	uint32_t		default_fqid;
-+	struct fm_port		*oh_port;
-+	uint32_t		egress_cnt;
-+	struct qman_fq		*egress_fqs;
-+	uint16_t		channel;
-+
-+	struct list_head fqs_ingress_list;
-+	struct list_head fqs_egress_list;
-+};
-+
-+#endif /* __OFFLINE_PORT_H */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0010-dpaa_eth-ls1043a-errata-check-if-the-skb-is-linear-a.patch b/target/linux/layerscape/patches-5.4/701-net-0010-dpaa_eth-ls1043a-errata-check-if-the-skb-is-linear-a.patch
deleted file mode 100644
index e601766bd9..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0010-dpaa_eth-ls1043a-errata-check-if-the-skb-is-linear-a.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 62fbf7ebdc28867ae613c3be9c62b30bc36edb1d Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 27 Feb 2017 17:35:24 +0200
-Subject: [PATCH] dpaa_eth: ls1043a errata: check if the skb is linear after 4k
- splitting
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -993,7 +993,7 @@ int __hot dpa_tx_extended(struct sk_buff
- 	struct dpa_percpu_priv_s *percpu_priv;
- 	struct rtnl_link_stats64 *percpu_stats;
- 	int err = 0;
--	const bool nonlinear = skb_is_nonlinear(skb);
-+	bool nonlinear;
- 	int *countptr, offset = 0;
- 
- 	priv = netdev_priv(net_dev);
-@@ -1023,6 +1023,8 @@ int __hot dpa_tx_extended(struct sk_buff
- 	}
- #endif
- 
-+	nonlinear = skb_is_nonlinear(skb);
-+
- 	/* MAX_SKB_FRAGS is larger than our DPA_SGT_MAX_ENTRIES; make sure
- 	 * we don't feed FMan with more fragments than it supports.
- 	 * Btw, we're using the first sgt entry to store the linear part of
diff --git a/target/linux/layerscape/patches-5.4/701-net-0011-dpaa_eth-ceetm-adapt-to-net-sched-API-changes.patch b/target/linux/layerscape/patches-5.4/701-net-0011-dpaa_eth-ceetm-adapt-to-net-sched-API-changes.patch
deleted file mode 100644
index b7e970d341..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0011-dpaa_eth-ceetm-adapt-to-net-sched-API-changes.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 23057cf5bf562358918a219083a4b022d36c4b73 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 13 Jun 2017 14:40:54 +0300
-Subject: [PATCH] dpaa_eth: ceetm: adapt to net/sched API changes
-
-The tc_classify and tc_classify_compat calls have been merged. Adapt to
-the new API.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -1839,7 +1839,7 @@ static struct ceetm_class *ceetm_classif
- 
- 	*qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
- 	tcf = priv->filter_list;
--	while (tcf && (result = tc_classify(skb, tcf, &res)) >= 0) {
-+	while (tcf && (result = tc_classify(skb, tcf, &res, false)) >= 0) {
- #ifdef CONFIG_NET_CLS_ACT
- 		switch (result) {
- 		case TC_ACT_QUEUED:
diff --git a/target/linux/layerscape/patches-5.4/701-net-0012-dpaa_eth-ceetm-adapt-to-the-new-gnet-stats-API.patch b/target/linux/layerscape/patches-5.4/701-net-0012-dpaa_eth-ceetm-adapt-to-the-new-gnet-stats-API.patch
deleted file mode 100644
index 0580541da2..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0012-dpaa_eth-ceetm-adapt-to-the-new-gnet-stats-API.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From e7db22d2a5f57c41ec0a211b5d03b8768a173139 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 13 Jun 2017 16:26:00 +0300
-Subject: [PATCH] dpaa_eth: ceetm: adapt to the new gnet stats API
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -1759,7 +1759,8 @@ static int ceetm_cls_dump_stats(struct Q
- 		}
- 	}
- 
--	if (gnet_stats_copy_basic(d, NULL, &tmp_bstats) < 0)
-+	if (gnet_stats_copy_basic(qdisc_root_sleeping_running(sch),
-+				  d, NULL, &tmp_bstats) < 0)
- 		return -1;
- 
- 	if (cq && qman_ceetm_cq_get_dequeue_statistics(cq, 0,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0013-dpaa_eth-ceetm-update-include-paths-for-tc-filters.patch b/target/linux/layerscape/patches-5.4/701-net-0013-dpaa_eth-ceetm-update-include-paths-for-tc-filters.patch
deleted file mode 100644
index d413739229..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0013-dpaa_eth-ceetm-update-include-paths-for-tc-filters.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From eb4edd5a72383c960801b2c3302036a1d3932775 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 13 Jun 2017 16:29:37 +0300
-Subject: [PATCH] dpaa_eth: ceetm: update include paths for tc filters
-
-The tcf_destroy_chain call prototype has been moved.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h
-@@ -33,6 +33,7 @@
- #define __DPAA_ETH_CEETM_H
- 
- #include <net/pkt_sched.h>
-+#include <net/pkt_cls.h>
- #include <net/netlink.h>
- #include <lnxwrp_fm.h>
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0014-dpa_eth-remove-unused-code.patch b/target/linux/layerscape/patches-5.4/701-net-0014-dpa_eth-remove-unused-code.patch
deleted file mode 100644
index 7d3ff7a7c4..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0014-dpa_eth-remove-unused-code.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From fb2390ac7b8fc635bc136a400419fd3eec1d006f Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Wed, 7 Jun 2017 16:10:34 +0300
-Subject: [PATCH] dpa_eth: remove unused code
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_base.c    | 58 ----------------------
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_base.h    |  1 -
- 2 files changed, 59 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_base.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_base.c
-@@ -165,64 +165,6 @@ _return_of_node_put:
- }
- EXPORT_SYMBOL(dpa_bp_probe);
- 
--int dpa_bp_shared_port_seed(struct dpa_bp *bp)
--{
--	void __iomem **ptr;
--
--	/* In MAC-less and Shared-MAC scenarios the physical
--	 * address of the buffer pool in device tree is set
--	 * to 0 to specify that another entity (USDPAA) will
--	 * allocate and seed the buffers
--	 */
--	if (!bp->paddr)
--		return 0;
--
--	/* allocate memory region for buffers */
--	devm_request_mem_region(bp->dev, bp->paddr,
--			bp->size * bp->config_count, KBUILD_MODNAME);
--	/* managed ioremap unmapping */
--	ptr = devres_alloc(devm_ioremap_release, sizeof(*ptr), GFP_KERNEL);
--	if (!ptr)
--		return -EIO;
--#ifndef CONFIG_PPC
--	bp->vaddr = ioremap_cache_ns(bp->paddr, bp->size * bp->config_count);
--#else
--	bp->vaddr = ioremap_prot(bp->paddr, bp->size * bp->config_count, 0);
--#endif
--	if (bp->vaddr == NULL) {
--		pr_err("Could not map memory for pool %d\n", bp->bpid);
--		devres_free(ptr);
--		return -EIO;
--	}
--	*ptr = bp->vaddr;
--	devres_add(bp->dev, ptr);
--
--	/* seed pool with buffers from that memory region */
--	if (bp->seed_pool) {
--		int count = bp->target_count;
--		dma_addr_t addr = bp->paddr;
--
--		while (count) {
--			struct bm_buffer bufs[8];
--			uint8_t num_bufs = 0;
--
--			do {
--				BUG_ON(addr > 0xffffffffffffull);
--				bufs[num_bufs].bpid = bp->bpid;
--				bm_buffer_set64(&bufs[num_bufs++], addr);
--				addr += bp->size;
--
--			} while (--count && (num_bufs < 8));
--
--			while (bman_release(bp->pool, bufs, num_bufs, 0))
--				cpu_relax();
--		}
--	}
--
--	return 0;
--}
--EXPORT_SYMBOL(dpa_bp_shared_port_seed);
--
- int dpa_bp_create(struct net_device *net_dev, struct dpa_bp *dpa_bp,
- 		size_t count)
- {
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_base.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_base.h
-@@ -45,6 +45,5 @@ struct dpa_bp * __cold __must_check /* _
- dpa_bp_probe(struct platform_device *_of_dev, size_t *count);
- int dpa_bp_create(struct net_device *net_dev, struct dpa_bp *dpa_bp,
- 		size_t count);
--int dpa_bp_shared_port_seed(struct dpa_bp *bp);
- 
- #endif /* __DPAA_ETH_BASE_H */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0015-fmd-use-ptp-timer-for-Fman-RTC-node-name.patch b/target/linux/layerscape/patches-5.4/701-net-0015-fmd-use-ptp-timer-for-Fman-RTC-node-name.patch
deleted file mode 100644
index 4a68c1f4ce..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0015-fmd-use-ptp-timer-for-Fman-RTC-node-name.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 7a31dff8328002acd4fdc76287bf9923c3392b02 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Sat, 17 Jun 2017 16:29:13 +0800
-Subject: [PATCH] fmd: use ptp-timer for Fman RTC node name
-
-Layerscape DPAA platforms have updated dts to use ptp-timer
-instead of rtc for Fman RTC node name. This patch is to
-update it in driver.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-@@ -684,9 +684,9 @@ static t_LnxWrpFmDev * ReadFmDevTreeNode
- 
-     /* Get the RTC base address and size */
-     memset(ids, 0, sizeof(ids));
--    if (WARN_ON(strlen("rtc") >= sizeof(ids[0].name)))
-+    if (WARN_ON(strlen("ptp-timer") >= sizeof(ids[0].name)))
-         return NULL;
--    strcpy(ids[0].name, "rtc");
-+    strcpy(ids[0].name, "ptp-timer");
-     if (WARN_ON(strlen("fsl,fman-rtc") >= sizeof(ids[0].compatible)))
-         return NULL;
-     strcpy(ids[0].compatible, "fsl,fman-rtc");
diff --git a/target/linux/layerscape/patches-5.4/701-net-0016-dpaa_eth-use-ptp-timer-phandle-instead-of-ptimer-han.patch b/target/linux/layerscape/patches-5.4/701-net-0016-dpaa_eth-use-ptp-timer-phandle-instead-of-ptimer-han.patch
deleted file mode 100644
index 6995700f3e..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0016-dpaa_eth-use-ptp-timer-phandle-instead-of-ptimer-han.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From b022befd58e4f7306069c6d9831179e0c3a9b1b1 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Sat, 17 Jun 2017 16:16:58 +0800
-Subject: [PATCH] dpaa_eth: use ptp-timer phandle instead of ptimer-handle
-
-Layerscape DPAA platforms have updated dts to use ptp-timer phandle
-instead of ptimer-handle for Fman RTC node. This patch is to
-update it in driver.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-@@ -575,7 +575,7 @@ dpa_mac_probe(struct platform_device *_o
- 	}
- 
- #ifdef CONFIG_FSL_DPAA_1588
--	phandle_prop = of_get_property(mac_node, "ptimer-handle", &lenp);
-+	phandle_prop = of_get_property(mac_node, "ptp-timer", &lenp);
- 	if (phandle_prop && ((mac_dev->phy_if != PHY_INTERFACE_MODE_SGMII) ||
- 			((mac_dev->phy_if == PHY_INTERFACE_MODE_SGMII) &&
- 			 (mac_dev->speed == SPEED_1000)))) {
-@@ -595,7 +595,7 @@ dpa_mac_probe(struct platform_device *_o
- 	if ((mac_dev->phy_if != PHY_INTERFACE_MODE_SGMII) ||
- 	    ((mac_dev->phy_if == PHY_INTERFACE_MODE_SGMII) &&
- 			 (mac_dev->speed == SPEED_1000))) {
--		ptp_priv.node = of_parse_phandle(mac_node, "ptimer-handle", 0);
-+		ptp_priv.node = of_parse_phandle(mac_node, "ptp-timer", 0);
- 		if (ptp_priv.node) {
- 			ptp_priv.of_dev = of_find_device_by_node(ptp_priv.node);
- 			if (unlikely(ptp_priv.of_dev == NULL)) {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0017-dpaa_eth-move-global-variable-clock-into-ptp_priv_s-.patch b/target/linux/layerscape/patches-5.4/701-net-0017-dpaa_eth-move-global-variable-clock-into-ptp_priv_s-.patch
deleted file mode 100644
index 617d3e5313..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0017-dpaa_eth-move-global-variable-clock-into-ptp_priv_s-.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From bbb23c33bbfc0fdb6098f0c61950f4a7c03379aa Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Mon, 19 Jun 2017 18:46:04 +0800
-Subject: [PATCH] dpaa_eth: move global variable 'clock' into ptp_priv_s struct
-
-This patch is to move global variable 'clock' for DPAA PTP
-clock pointer into ptp_priv_s struct.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h | 1 +
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ptp.c | 5 +++--
- 2 files changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-@@ -669,6 +669,7 @@ static inline void _dpa_assign_wq(struct
- struct ptp_priv_s {
- 	struct device_node *node;
- 	struct platform_device *of_dev;
-+	struct ptp_clock *clock;
- 	struct mac_device *mac_dev;
- };
- extern struct ptp_priv_s ptp_priv;
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ptp.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ptp.c
-@@ -27,8 +27,6 @@
- #include "dpaa_eth.h"
- #include "mac.h"
- 
--struct ptp_clock *clock;
--
- static struct mac_device *mac_dev;
- static u32 freqCompensation;
- 
-@@ -256,6 +254,7 @@ static int __init __cold dpa_ptp_load(vo
- {
- 	struct device *ptp_dev;
- 	struct timespec64 now;
-+	struct ptp_clock *clock = ptp_priv.clock;
- 	int dpa_phc_index;
- 	int err;
- 
-@@ -283,6 +282,8 @@ module_init(dpa_ptp_load);
- 
- static void __exit __cold dpa_ptp_unload(void)
- {
-+	struct ptp_clock *clock = ptp_priv.clock;
-+
- 	if (mac_dev->fm_rtc_disable_interrupt)
- 		mac_dev->fm_rtc_disable_interrupt(mac_dev->fm_dev, 0xffffffff);
- 	ptp_clock_unregister(clock);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0018-sdk_dpaa-use-new-api-ethtool_ksettings_-get-set.patch b/target/linux/layerscape/patches-5.4/701-net-0018-sdk_dpaa-use-new-api-ethtool_ksettings_-get-set.patch
deleted file mode 100644
index 0df382e7d9..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0018-sdk_dpaa-use-new-api-ethtool_ksettings_-get-set.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From c77e142beed7241a1360f2dedbe34e2f697512c9 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Tue, 29 Aug 2017 09:51:45 +0300
-Subject: [PATCH] sdk_dpaa: use new api ethtool_ksettings_{get|set}
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- .../net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c   | 20 +++++++++-----------
- 1 file changed, 9 insertions(+), 11 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c
-@@ -84,8 +84,8 @@ static char dpa_stats_global[][ETH_GSTRI
- #define DPA_STATS_PERCPU_LEN ARRAY_SIZE(dpa_stats_percpu)
- #define DPA_STATS_GLOBAL_LEN ARRAY_SIZE(dpa_stats_global)
- 
--static int __cold dpa_get_settings(struct net_device *net_dev,
--		struct ethtool_cmd *et_cmd)
-+static int __cold dpa_get_ksettings(struct net_device *net_dev,
-+		struct ethtool_link_ksettings *cmd)
- {
- 	int			 _errno;
- 	struct dpa_priv_s	*priv;
-@@ -101,15 +101,13 @@ static int __cold dpa_get_settings(struc
- 		return 0;
- 	}
- 
--	_errno = phy_ethtool_gset(priv->mac_dev->phy_dev, et_cmd);
--	if (unlikely(_errno < 0))
--		netdev_err(net_dev, "phy_ethtool_gset() = %d\n", _errno);
-+	phy_ethtool_ksettings_get(priv->mac_dev->phy_dev, cmd);
- 
- 	return _errno;
- }
- 
--static int __cold dpa_set_settings(struct net_device *net_dev,
--		struct ethtool_cmd *et_cmd)
-+static int __cold dpa_set_ksettings(struct net_device *net_dev,
-+		struct ethtool_link_ksettings *cmd)
- {
- 	int			 _errno;
- 	struct dpa_priv_s	*priv;
-@@ -125,9 +123,9 @@ static int __cold dpa_set_settings(struc
- 		return -ENODEV;
- 	}
- 
--	_errno = phy_ethtool_sset(priv->mac_dev->phy_dev, et_cmd);
-+	_errno = phy_ethtool_ksettings_set(priv->mac_dev->phy_dev, cmd);
- 	if (unlikely(_errno < 0))
--		netdev_err(net_dev, "phy_ethtool_sset() = %d\n", _errno);
-+		netdev_err(net_dev, "phy_ethtool_ksettings_set() = %d\n", _errno);
- 
- 	return _errno;
- }
-@@ -522,8 +520,8 @@ static void dpa_get_strings(struct net_d
- }
- 
- const struct ethtool_ops dpa_ethtool_ops = {
--	.get_settings = dpa_get_settings,
--	.set_settings = dpa_set_settings,
-+	.get_link_ksettings = dpa_get_ksettings,
-+	.set_link_ksettings = dpa_set_ksettings,
- 	.get_drvinfo = dpa_get_drvinfo,
- 	.get_msglevel = dpa_get_msglevel,
- 	.set_msglevel = dpa_set_msglevel,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0019-sdk_dpaa-fix-dpa_set_ksettings.patch b/target/linux/layerscape/patches-5.4/701-net-0019-sdk_dpaa-fix-dpa_set_ksettings.patch
deleted file mode 100644
index 432591e88d..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0019-sdk_dpaa-fix-dpa_set_ksettings.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 3ffb14b6f3ddd9d8befe08482e31bc34103cf953 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Thu, 31 Aug 2017 09:08:15 +0300
-Subject: [PATCH] sdk_dpaa: fix dpa_set_ksettings
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c
-@@ -107,7 +107,7 @@ static int __cold dpa_get_ksettings(stru
- }
- 
- static int __cold dpa_set_ksettings(struct net_device *net_dev,
--		struct ethtool_link_ksettings *cmd)
-+		const struct ethtool_link_ksettings *cmd)
- {
- 	int			 _errno;
- 	struct dpa_priv_s	*priv;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0020-dpaa_eth-memac-set-adjust_link-callback-for-fixed-li.patch b/target/linux/layerscape/patches-5.4/701-net-0020-dpaa_eth-memac-set-adjust_link-callback-for-fixed-li.patch
deleted file mode 100644
index c2a76ae657..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0020-dpaa_eth-memac-set-adjust_link-callback-for-fixed-li.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 47113bd7cb07c2399f536a2dd8f4b3a6c599dfcd Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Thu, 31 Aug 2017 13:16:47 +0300
-Subject: [PATCH] dpaa_eth: memac: set adjust_link callback for fixed link
- interfaces
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c | 8 +++-----
- 1 file changed, 3 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c
-@@ -503,11 +503,9 @@ static int memac_init_phy(struct net_dev
- {
- 	struct phy_device       *phy_dev;
- 
--	if (of_phy_is_fixed_link(mac_dev->phy_node)) {
--		phy_dev = of_phy_attach(net_dev, mac_dev->phy_node,
--					0, mac_dev->phy_if);
--	} else if ((macdev2enetinterface(mac_dev) == e_ENET_MODE_XGMII_10000) ||
--		   (macdev2enetinterface(mac_dev) == e_ENET_MODE_SGMII_2500)) {
-+	if ((macdev2enetinterface(mac_dev) == e_ENET_MODE_XGMII_10000) ||
-+	    (macdev2enetinterface(mac_dev) == e_ENET_MODE_SGMII_2500) ||
-+	    of_phy_is_fixed_link(mac_dev->phy_node)) {
- 		phy_dev = of_phy_connect(net_dev, mac_dev->phy_node,
- 					 &adjust_link_void, 0,
- 					 mac_dev->phy_if);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0021-sdk_dpaa-ls1043a-errata-resplit-the-skb-after-copy.patch b/target/linux/layerscape/patches-5.4/701-net-0021-sdk_dpaa-ls1043a-errata-resplit-the-skb-after-copy.patch
deleted file mode 100644
index a9512cc808..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0021-sdk_dpaa-ls1043a-errata-resplit-the-skb-after-copy.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 3532c45dc451d2bb7d88a33a554a86422828c9aa Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Thu, 13 Jul 2017 17:26:02 +0300
-Subject: [PATCH] sdk_dpaa: ls1043a errata: resplit the skb after copy
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -1016,6 +1016,7 @@ int __hot dpa_tx_extended(struct sk_buff
- #endif /* CONFIG_FSL_DPAA_TS */
- 
- #ifndef CONFIG_PPC
-+resplit_4k:
- 	if (unlikely(dpaa_errata_a010022)) {
- 		skb = split_skb_at_4k_boundaries(skb);
- 		if (!skb)
-@@ -1062,6 +1063,10 @@ int __hot dpa_tx_extended(struct sk_buff
- 			struct sk_buff *nskb = skb_copy(skb, GFP_ATOMIC);
- 			kfree_skb(skb);
- 			skb = nskb;
-+#ifndef CONFIG_PPC
-+			if (unlikely(dpaa_errata_a010022))
-+				goto resplit_4k;
-+#endif
- 			/* skb_copy() has now linearized the skbuff. */
- 		} else if (unlikely(nonlinear)) {
- 			/* We are here because the egress skb contains
diff --git a/target/linux/layerscape/patches-5.4/701-net-0022-sdk_dpaa-ls1043a-errata-realign-and-linearize-egress.patch b/target/linux/layerscape/patches-5.4/701-net-0022-sdk_dpaa-ls1043a-errata-realign-and-linearize-egress.patch
deleted file mode 100644
index 3e89b3d7b6..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0022-sdk_dpaa-ls1043a-errata-realign-and-linearize-egress.patch
+++ /dev/null
@@ -1,205 +0,0 @@
-From 9821d27a36704d19c57d4b6c52585b9868703633 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 4 Sep 2017 13:41:17 +0300
-Subject: [PATCH] sdk_dpaa: ls1043a errata: realign and linearize egress skbs
-
-Allocate a new page and copy the skb's contents to it in order to
-guarantee that 4k boundary crossings do not occur.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c  | 159 +++++++++++----------
- 1 file changed, 84 insertions(+), 75 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -742,86 +742,94 @@ int __hot skb_to_contig_fd(struct dpa_pr
- EXPORT_SYMBOL(skb_to_contig_fd);
- 
- #ifndef CONFIG_PPC
--struct sk_buff *split_skb_at_4k_boundaries(struct sk_buff *skb)
-+/* Verify the conditions that trigger the A010022 errata: 4K memory address
-+ * crossings.
-+ */
-+bool a010022_check_skb(struct sk_buff *skb)
- {
--	unsigned int length, nr_frags, moved_len = 0;
--	u64 page_start;
--	struct page *page;
-+	int nr_frags, i = 0;
- 	skb_frag_t *frag;
--	int i = 0, j = 0;
- 
--	/* make sure skb is not shared */
--	skb = skb_share_check(skb, GFP_ATOMIC);
--	if (!skb)
--		return NULL;
-+	/* Check if the headroom crosses a boundary */
-+	if (HAS_DMA_ISSUE(skb->head, skb_headroom(skb)))
-+		return true;
-+
-+	/* Check if the non-paged data crosses a boundary */
-+	if (HAS_DMA_ISSUE(skb->data, skb_headlen(skb)))
-+		return true;
-+
-+	/* Check if the entire linear skb crosses a boundary */
-+	if (HAS_DMA_ISSUE(skb->head, skb_end_offset(skb)))
-+		return true;
- 
- 	nr_frags = skb_shinfo(skb)->nr_frags;
--	page_start = (u64)skb->data;
- 
--	/* split the linear part at the first 4k boundary and create one (big)
--	 * fragment with the rest
--	 */
--	if (HAS_DMA_ISSUE(skb->data, skb_headlen(skb))) {
--		/* we'll add one more frag, make sure there's room */
--		if (nr_frags + 1 > DPA_SGT_MAX_ENTRIES)
--			return NULL;
--
--		/* next page boundary */
--		page_start = (page_start + 0x1000) & ~0xFFF;
--		page = virt_to_page(page_start);
--
--		/* move the rest of fragments to make room for a new one at j */
--		for (i = nr_frags - 1; i >= j;  i--)
--			skb_shinfo(skb)->frags[i + 1] = skb_shinfo(skb)->frags[i];
--
--		/* move length bytes to a paged fragment at j */
--		length = min((u64)0x1000,
--			     (u64)skb->data + skb_headlen(skb) - page_start);
--		skb->data_len += length;
--		moved_len += length;
--		skb_fill_page_desc(skb, j++, page, 0, length);
--		get_page(page);
--		skb_shinfo(skb)->nr_frags = ++nr_frags;
-+	while (i < nr_frags) {
-+		frag = &skb_shinfo(skb)->frags[i];
-+
-+		/* Check if the paged fragment crosses a boundary from its
-+		 * offset to its end.
-+		 */
-+		if (HAS_DMA_ISSUE(frag->page_offset, frag->size))
-+			return true;
-+
-+		i++;
- 	}
--	/* adjust the tail pointer */
--	skb->tail -= moved_len;
--	j = 0;
--
--	/* split any paged fragment that crosses a 4K boundary */
--	while (j < nr_frags) {
--		frag = &skb_shinfo(skb)->frags[j];
--
--		/* if there is a 4K boundary between the fragment's offset and end */
--		if (HAS_DMA_ISSUE(frag->page_offset, frag->size)) {
--			/* we'll add one more frag, make sure there's room */
--			if (nr_frags + 1 > DPA_SGT_MAX_ENTRIES)
--				return NULL;
--
--			/* new page boundary */
--			page_start = (u64)page_address(skb_frag_page(frag)) +
--						  frag->page_offset + 0x1000;
--			page_start = (u64)page_start & ~0xFFF;
--			page = virt_to_page(page_start);
--
--			/* move the rest of fragments to make room for a new one at j+1 */
--			for (i = nr_frags - 1; i > j;  i--)
--				skb_shinfo(skb)->frags[i + 1] =
--						skb_shinfo(skb)->frags[i];
--
--			/* move length bytes to a new paged fragment at j+1 */
--			length = (u64)page_address(skb_frag_page(frag)) +
--				 frag->page_offset + frag->size - page_start;
--			frag->size -= length;
--			skb_fill_page_desc(skb, j + 1, page, 0, length);
--			get_page(page);
--			skb_shinfo(skb)->nr_frags = ++nr_frags;
--		}
- 
--		/* move to next frag */
--		j++;
-+	return false;
-+}
-+
-+/* Realign the skb by copying its contents at the start of a newly allocated
-+ * page. Build a new skb around the new buffer and release the old one.
-+ * A performance drop should be expected.
-+ */
-+struct sk_buff *a010022_realign_skb(struct sk_buff *skb)
-+{
-+	int headroom = skb_headroom(skb);
-+	struct sk_buff *nskb = NULL;
-+	struct page *npage;
-+	void *npage_addr;
-+	int nsize;
-+
-+	npage = alloc_page(GFP_ATOMIC);
-+	if (unlikely(!npage)) {
-+		WARN_ONCE(1, "Memory allocation failure\n");
-+		return NULL;
-+	}
-+	npage_addr = page_address(npage);
-+
-+	/* For the new skb we only need the old one's data (both non-paged and
-+	 * paged) and a headroom large enough to fit our private info. We can
-+	 * skip the old tailroom.
-+	 *
-+	 * Make sure the new linearized buffer will not exceed a page's size.
-+	 */
-+	nsize = headroom + skb->len +
-+		SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
-+	if (unlikely(nsize > 4096))
-+		goto err;
-+
-+	nskb = build_skb(npage_addr, nsize);
-+	if (unlikely(!nskb))
-+		goto err;
-+
-+	/* Code borrowed and adapted from skb_copy() */
-+	skb_reserve(nskb, headroom);
-+	skb_put(nskb, skb->len);
-+	if (skb_copy_bits(skb, 0, nskb->data, skb->len)) {
-+		WARN_ONCE(1, "skb parsing failure\n");
-+		goto err;
- 	}
-+	copy_skb_header(nskb, skb);
-+
-+	dev_kfree_skb(skb);
-+	return nskb;
- 
--	return skb;
-+err:
-+	if (nskb)
-+		dev_kfree_skb(nskb);
-+	put_page(npage);
-+	return NULL;
- }
- #endif
- 
-@@ -1016,9 +1024,9 @@ int __hot dpa_tx_extended(struct sk_buff
- #endif /* CONFIG_FSL_DPAA_TS */
- 
- #ifndef CONFIG_PPC
--resplit_4k:
--	if (unlikely(dpaa_errata_a010022)) {
--		skb = split_skb_at_4k_boundaries(skb);
-+realign_4k:
-+	if (unlikely(dpaa_errata_a010022) && a010022_check_skb(skb)) {
-+		skb = a010022_realign_skb(skb);
- 		if (!skb)
- 			goto skb_to_fd_failed;
- 	}
-@@ -1064,8 +1072,9 @@ resplit_4k:
- 			kfree_skb(skb);
- 			skb = nskb;
- #ifndef CONFIG_PPC
--			if (unlikely(dpaa_errata_a010022))
--				goto resplit_4k;
-+			if (unlikely(dpaa_errata_a010022) &&
-+			    a010022_check_skb(skb))
-+				goto realign_4k;
- #endif
- 			/* skb_copy() has now linearized the skbuff. */
- 		} else if (unlikely(nonlinear)) {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0023-sdk_dpaa-ls1043a-errata-realign-skb-in-place-if-need.patch b/target/linux/layerscape/patches-5.4/701-net-0023-sdk_dpaa-ls1043a-errata-realign-skb-in-place-if-need.patch
deleted file mode 100644
index 1eda4aee46..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0023-sdk_dpaa-ls1043a-errata-realign-skb-in-place-if-need.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 5a2ba8a9c6b2686aa94a8d5ac35beddf38cba24a Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 4 Sep 2017 13:46:00 +0300
-Subject: [PATCH] sdk_dpaa: ls1043a errata: realign skb in place if needed
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -1024,7 +1024,6 @@ int __hot dpa_tx_extended(struct sk_buff
- #endif /* CONFIG_FSL_DPAA_TS */
- 
- #ifndef CONFIG_PPC
--realign_4k:
- 	if (unlikely(dpaa_errata_a010022) && a010022_check_skb(skb)) {
- 		skb = a010022_realign_skb(skb);
- 		if (!skb)
-@@ -1073,8 +1072,11 @@ realign_4k:
- 			skb = nskb;
- #ifndef CONFIG_PPC
- 			if (unlikely(dpaa_errata_a010022) &&
--			    a010022_check_skb(skb))
--				goto realign_4k;
-+			    a010022_check_skb(skb)) {
-+				skb = realign_skb(skb);
-+				if (!skb)
-+					goto skb_to_fd_failed;
-+			}
- #endif
- 			/* skb_copy() has now linearized the skbuff. */
- 		} else if (unlikely(nonlinear)) {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0024-sdk_dpaa-ls1043a-errata-verify-and-resize-headroom-a.patch b/target/linux/layerscape/patches-5.4/701-net-0024-sdk_dpaa-ls1043a-errata-verify-and-resize-headroom-a.patch
deleted file mode 100644
index 6014de951f..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0024-sdk_dpaa-ls1043a-errata-verify-and-resize-headroom-a.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From f6413a7e32d1f98a258e0ed9abd4df3159902fd3 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 4 Sep 2017 13:57:21 +0300
-Subject: [PATCH] sdk_dpaa: ls1043a errata: verify and resize headroom
- alignment
-
-If the skb's headroom isn't aligned to 16 bytes, reallocate the entire
-skb and resize its headroom to priv->tx_headroom. Update the pointers
-to the network and transport headers accordingly.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c  | 38 +++++++++++++++-------
- 1 file changed, 27 insertions(+), 11 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -742,14 +742,19 @@ int __hot skb_to_contig_fd(struct dpa_pr
- EXPORT_SYMBOL(skb_to_contig_fd);
- 
- #ifndef CONFIG_PPC
--/* Verify the conditions that trigger the A010022 errata: 4K memory address
-- * crossings.
-+/* Verify the conditions that trigger the A010022 errata: data unaligned to
-+ * 16 bytes and 4K memory address crossings.
-  */
--bool a010022_check_skb(struct sk_buff *skb)
-+static bool a010022_check_skb(struct sk_buff *skb, struct dpa_priv_s *priv)
- {
- 	int nr_frags, i = 0;
- 	skb_frag_t *frag;
- 
-+	/* Check if the headroom is aligned */
-+	if (((u16)skb->data - priv->tx_headroom) %
-+	    priv->buf_layout[TX].data_align != 0)
-+		return true;
-+
- 	/* Check if the headroom crosses a boundary */
- 	if (HAS_DMA_ISSUE(skb->head, skb_headroom(skb)))
- 		return true;
-@@ -767,7 +772,7 @@ bool a010022_check_skb(struct sk_buff *s
- 	while (i < nr_frags) {
- 		frag = &skb_shinfo(skb)->frags[i];
- 
--		/* Check if the paged fragment crosses a boundary from its
-+		/* Check if a paged fragment crosses a boundary from its
- 		 * offset to its end.
- 		 */
- 		if (HAS_DMA_ISSUE(frag->page_offset, frag->size))
-@@ -783,13 +788,17 @@ bool a010022_check_skb(struct sk_buff *s
-  * page. Build a new skb around the new buffer and release the old one.
-  * A performance drop should be expected.
-  */
--struct sk_buff *a010022_realign_skb(struct sk_buff *skb)
-+static struct sk_buff *a010022_realign_skb(struct sk_buff *skb,
-+					   struct dpa_priv_s *priv)
- {
--	int headroom = skb_headroom(skb);
-+	int trans_offset = skb_transport_offset(skb);
-+	int net_offset = skb_network_offset(skb);
- 	struct sk_buff *nskb = NULL;
-+	int nsize, headroom;
- 	struct page *npage;
- 	void *npage_addr;
--	int nsize;
-+
-+	headroom = priv->tx_headroom;
- 
- 	npage = alloc_page(GFP_ATOMIC);
- 	if (unlikely(!npage)) {
-@@ -822,6 +831,13 @@ struct sk_buff *a010022_realign_skb(stru
- 	}
- 	copy_skb_header(nskb, skb);
- 
-+	/* We move the headroom when we align it so we have to reset the
-+	 * network and transport header offsets relative to the new data
-+	 * pointer. The checksum offload relies on these offsets.
-+	 */
-+	skb_set_network_header(nskb, net_offset);
-+	skb_set_transport_header(nskb, trans_offset);
-+
- 	dev_kfree_skb(skb);
- 	return nskb;
- 
-@@ -1024,8 +1040,8 @@ int __hot dpa_tx_extended(struct sk_buff
- #endif /* CONFIG_FSL_DPAA_TS */
- 
- #ifndef CONFIG_PPC
--	if (unlikely(dpaa_errata_a010022) && a010022_check_skb(skb)) {
--		skb = a010022_realign_skb(skb);
-+	if (unlikely(dpaa_errata_a010022) && a010022_check_skb(skb, priv)) {
-+		skb = a010022_realign_skb(skb, priv);
- 		if (!skb)
- 			goto skb_to_fd_failed;
- 	}
-@@ -1072,8 +1088,8 @@ int __hot dpa_tx_extended(struct sk_buff
- 			skb = nskb;
- #ifndef CONFIG_PPC
- 			if (unlikely(dpaa_errata_a010022) &&
--			    a010022_check_skb(skb)) {
--				skb = realign_skb(skb);
-+			    a010022_check_skb(skb, priv)) {
-+				skb = a010022_realign_skb(skb, priv);
- 				if (!skb)
- 					goto skb_to_fd_failed;
- 			}
diff --git a/target/linux/layerscape/patches-5.4/701-net-0025-sdk_dpaa-ls1043a-errata-do-not-recycle-the-realigned.patch b/target/linux/layerscape/patches-5.4/701-net-0025-sdk_dpaa-ls1043a-errata-do-not-recycle-the-realigned.patch
deleted file mode 100644
index 4030385be5..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0025-sdk_dpaa-ls1043a-errata-do-not-recycle-the-realigned.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From e8c0a77a831843a66b3ac0048aa6c76bc39b0332 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 4 Sep 2017 14:03:01 +0300
-Subject: [PATCH] sdk_dpaa: ls1043a errata: do not recycle the realigned
- buffers
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h    | 10 ++++++----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c |  9 +++++++++
- 2 files changed, 15 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-@@ -680,15 +680,17 @@ static inline void _dpa_bp_free_pf(void
- 	put_page(virt_to_head_page(addr));
- }
- 
--/* TODO: LS1043A SoC has a HW issue regarding FMan DMA transactions; The issue
-- * manifests itself at high traffic rates when frames exceed 4K memory
-- * boundaries; For the moment, we use a SW workaround to avoid frames larger
-- * than 4K or that exceed 4K alignments.
-+/* LS1043A SoC has a HW issue regarding FMan DMA transactions; The issue
-+ * manifests itself at high traffic rates when frames cross 4K memory
-+ * boundaries or when they are not aligned to 16 bytes; For the moment, we
-+ * use a SW workaround to avoid frames larger than 4K or that exceed 4K
-+ * alignments and to realign the frames to 16 bytes.
-  */
- 
- #ifndef CONFIG_PPC
- extern bool dpaa_errata_a010022; /* SoC affected by A010022 errata */
- 
-+#define NONREC_MARK	0x01
- #define HAS_DMA_ISSUE(start, size) \
- 	(((u64)(start) + (size)) > (((u64)(start) + 0x1000) & ~0xFFF))
- #define BOUNDARY_4K(start, size) (((u64)(start) + (u64)(size)) & ~0xFFF)
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -302,6 +302,12 @@ EXPORT_SYMBOL(_dpa_cleanup_tx_fd);
- #ifndef CONFIG_FSL_DPAA_TS
- bool dpa_skb_is_recyclable(struct sk_buff *skb)
- {
-+#ifndef CONFIG_PPC
-+	/* Do no recycle skbs realigned by the errata workaround */
-+	if (unlikely(dpaa_errata_a010022) && skb->mark == NONREC_MARK)
-+		return false;
-+#endif
-+
- 	/* No recycling possible if skb buffer is kmalloc'ed  */
- 	if (skb->head_frag == 0)
- 		return false;
-@@ -838,6 +844,9 @@ static struct sk_buff *a010022_realign_s
- 	skb_set_network_header(nskb, net_offset);
- 	skb_set_transport_header(nskb, trans_offset);
- 
-+	/* We don't want the buffer to be recycled so we mark it accordingly */
-+	nskb->mark = NONREC_MARK;
-+
- 	dev_kfree_skb(skb);
- 	return nskb;
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0026-sdk_dpaa-ls1043a-errata-fix-arm32-build.patch b/target/linux/layerscape/patches-5.4/701-net-0026-sdk_dpaa-ls1043a-errata-fix-arm32-build.patch
deleted file mode 100644
index 3799f8ac37..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0026-sdk_dpaa-ls1043a-errata-fix-arm32-build.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 211d0b5127a468cf0e2db20b4854252e6784cf08 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 4 Sep 2017 14:35:21 +0300
-Subject: [PATCH] sdk_dpaa: ls1043a errata: fix arm32 build
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h    | 6 ++----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 2 +-
- 2 files changed, 3 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-@@ -689,12 +689,10 @@ static inline void _dpa_bp_free_pf(void
- 
- #ifndef CONFIG_PPC
- extern bool dpaa_errata_a010022; /* SoC affected by A010022 errata */
--
- #define NONREC_MARK	0x01
- #define HAS_DMA_ISSUE(start, size) \
--	(((u64)(start) + (size)) > (((u64)(start) + 0x1000) & ~0xFFF))
--#define BOUNDARY_4K(start, size) (((u64)(start) + (u64)(size)) & ~0xFFF)
--
-+	(((uintptr_t)(start) + (size)) > \
-+	 (((uintptr_t)(start) + 0x1000) & ~0xFFF))
- #endif  /* !CONFIG_PPC */
- 
- #endif	/* __DPA_H */
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -757,7 +757,7 @@ static bool a010022_check_skb(struct sk_
- 	skb_frag_t *frag;
- 
- 	/* Check if the headroom is aligned */
--	if (((u16)skb->data - priv->tx_headroom) %
-+	if (((uintptr_t)skb->data - priv->tx_headroom) %
- 	    priv->buf_layout[TX].data_align != 0)
- 		return true;
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0027-drivers-staging-fsl_qbman-Fix-SWP-Mask-in-Error-Hand.patch b/target/linux/layerscape/patches-5.4/701-net-0027-drivers-staging-fsl_qbman-Fix-SWP-Mask-in-Error-Hand.patch
deleted file mode 100644
index 7d04535973..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0027-drivers-staging-fsl_qbman-Fix-SWP-Mask-in-Error-Hand.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 456090fba3aabfe929be7532dbac9de82918e2ad Mon Sep 17 00:00:00 2001
-From: Roy Pledge <roy.pledge@nxp.com>
-Date: Tue, 5 Sep 2017 16:47:49 -0400
-Subject: [PATCH] drivers/staging/fsl_qbman: Fix SWP Mask in Error Handling
-
-If an ECC error occurs QBMan stores data in a register for
-debug purposes. If the memory is software portal memory then
-15 bits are used. This patch adjusts the mask to be correct.
-
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
----
- drivers/staging/fsl_qbman/qman_config.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/staging/fsl_qbman/qman_config.c
-+++ b/drivers/staging/fsl_qbman/qman_config.c
-@@ -254,7 +254,7 @@ static const struct qman_error_info_mdat
- 	QMAN_ERR_MDATA(0x01FF, 72, "WQ context memory"),
- 	QMAN_ERR_MDATA(0x00FF, 240, "CGR memory"),
- 	QMAN_ERR_MDATA(0x00FF, 302, "Internal Order Restoration List memory"),
--	QMAN_ERR_MDATA(0x01FF, 256, "SW portal ring memory"),
-+	QMAN_ERR_MDATA(0x7FFF, 256, "SW portal ring memory"),
- 	QMAN_ERR_MDATA(0x07FF, 181, "CEETM class queue descriptor memory"),
- 	QMAN_ERR_MDATA(0x0FFF, 140, "CEETM extended SFDR memory"),
- 	QMAN_ERR_MDATA(0x0FFF, 25, "CEETM logical FQ mapping memory"),
diff --git a/target/linux/layerscape/patches-5.4/701-net-0028-sdk_dpaa-avoid-crashing-on-OOM.patch b/target/linux/layerscape/patches-5.4/701-net-0028-sdk_dpaa-avoid-crashing-on-OOM.patch
deleted file mode 100644
index 3e42322d63..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0028-sdk_dpaa-avoid-crashing-on-OOM.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 8254c87e00992f6b14472076f435cba52ad9ff9d Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Thu, 31 Aug 2017 17:42:07 +0300
-Subject: [PATCH] sdk_dpaa: avoid crashing on OOM
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -100,8 +100,12 @@ static int _dpa_bp_add_8_bufs(const stru
- 		 * an entire cacheline for performance reasons.
- 		 */
- #ifndef CONFIG_PPC
--		if (unlikely(dpaa_errata_a010022))
--			new_buf = page_address(alloc_page(GFP_ATOMIC));
-+		if (unlikely(dpaa_errata_a010022)) {
-+			struct page *new_page = alloc_page(GFP_ATOMIC);
-+			if (unlikely(!new_page))
-+				goto netdev_alloc_failed;
-+			new_buf = page_address(new_page);
-+		}
- 		else
- #endif
- 		new_buf = netdev_alloc_frag(SMP_CACHE_BYTES + DPA_BP_RAW_SIZE);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0029-sdk_dpaa-update-the-xmit-timestamp-to-avoid-watchdog.patch b/target/linux/layerscape/patches-5.4/701-net-0029-sdk_dpaa-update-the-xmit-timestamp-to-avoid-watchdog.patch
deleted file mode 100644
index 044e7013a0..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0029-sdk_dpaa-update-the-xmit-timestamp-to-avoid-watchdog.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 7207c6eaead4fbcf6dfec2a185550cd30aba5071 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Thu, 7 Sep 2017 14:49:09 +0300
-Subject: [PATCH] sdk_dpaa: update the xmit timestamp to avoid watchdog
- timeouts
-
-Update txq0's trans_start in order to prevent the netdev watchdog from
-triggering too quickly. Since we set the LLTX flag, the stack won't update
-the jiffies for other tx queues. Prevent the watchdog from checking the
-other tx queues by adding the NETIF_HW_ACCEL_MQ flag.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c    | 3 +++
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 1 +
- include/linux/netdev_features.h                       | 2 ++
- net/sched/sch_generic.c                               | 7 +++++++
- 4 files changed, 13 insertions(+)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-@@ -772,6 +772,9 @@ static int dpa_private_netdev_init(struc
- 	/* Advertise GRO support */
- 	net_dev->features |= NETIF_F_GRO;
- 
-+	/* Advertise NETIF_F_HW_ACCEL_MQ to avoid Tx timeout warnings */
-+	net_dev->features |= NETIF_F_HW_ACCEL_MQ;
-+
- 	return dpa_netdev_init(net_dev, mac_addr, tx_timeout);
- }
- 
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -1140,6 +1140,7 @@ int __hot dpa_tx_extended(struct sk_buff
- 	if (unlikely(dpa_xmit(priv, percpu_stats, &fd, egress_fq, conf_fq) < 0))
- 		goto xmit_failed;
- 
-+	netif_trans_update(net_dev);
- 	return NETDEV_TX_OK;
- 
- xmit_failed:
---- a/include/linux/netdev_features.h
-+++ b/include/linux/netdev_features.h
-@@ -77,6 +77,7 @@ enum {
- 	NETIF_F_RX_UDP_TUNNEL_PORT_BIT, /* Offload of RX port for UDP tunnels */
- 	NETIF_F_HW_TLS_TX_BIT,		/* Hardware TLS TX offload */
- 	NETIF_F_HW_TLS_RX_BIT,		/* Hardware TLS RX offload */
-+	NETIF_F_HW_ACCEL_MQ_BIT,	/* Hardware-accelerated multiqueue */
- 
- 	NETIF_F_GRO_HW_BIT,		/* Hardware Generic receive offload */
- 	NETIF_F_HW_TLS_RECORD_BIT,	/* Offload TLS record */
-@@ -150,6 +151,7 @@ enum {
- #define NETIF_F_GSO_UDP_L4	__NETIF_F(GSO_UDP_L4)
- #define NETIF_F_HW_TLS_TX	__NETIF_F(HW_TLS_TX)
- #define NETIF_F_HW_TLS_RX	__NETIF_F(HW_TLS_RX)
-+#define NETIF_F_HW_ACCEL_MQ	__NETIF_F(HW_ACCEL_MQ)
- 
- /* Finds the next feature with the highest number of the range of start till 0.
-  */
---- a/net/sched/sch_generic.c
-+++ b/net/sched/sch_generic.c
-@@ -465,6 +465,13 @@ static void dev_watchdog(struct timer_li
- 					txq->trans_timeout++;
- 					break;
- 				}
-+
-+				/* Devices with HW_ACCEL_MQ have multiple txqs
-+				 * but update only the first one's transmission
-+				 * timestamp so avoid checking the rest.
-+				 */
-+				if (dev->features & NETIF_F_HW_ACCEL_MQ)
-+					break;
- 			}
- 
- 			if (some_queue_timedout) {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0030-sdk_fman-resolve-arm32-compilation-issues-for-linux-.patch b/target/linux/layerscape/patches-5.4/701-net-0030-sdk_fman-resolve-arm32-compilation-issues-for-linux-.patch
deleted file mode 100644
index 6c0db1eadc..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0030-sdk_fman-resolve-arm32-compilation-issues-for-linux-.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 1a1f2bd221d72f8e4fcb66b6b6763a158965f746 Mon Sep 17 00:00:00 2001
-From: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
-Date: Mon, 11 Sep 2017 16:10:58 +0300
-Subject: [PATCH] sdk_fman: resolve arm32 compilation issues for linux-4.13
-
-Signed-off-by: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_dtsec.c | 2 ++
- .../ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_dtsec_mii_acc.c | 2 ++
- .../ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_memac_mii_acc.c | 2 ++
- drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fman_kg.c    | 2 ++
- drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fman_port.c | 2 ++
- drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fman.c           | 2 ++
- 6 files changed, 12 insertions(+)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_dtsec.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_dtsec.c
-@@ -31,6 +31,8 @@
-  */
- 
- 
-+#include "std_ext.h"
-+#include "error_ext.h"
- #include "fsl_fman_dtsec.h"
- 
- 
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_dtsec_mii_acc.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_dtsec_mii_acc.c
-@@ -31,6 +31,8 @@
-  */
- 
- 
-+#include "std_ext.h"
-+#include "error_ext.h"
- #include "common/general.h"
- #include "fsl_fman_dtsec_mii_acc.h"
- 
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_memac_mii_acc.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_memac_mii_acc.c
-@@ -31,6 +31,8 @@
-  */
- 
- 
-+#include "std_ext.h"
-+#include "error_ext.h"
- #include "fsl_fman_memac_mii_acc.h"
- 
- static void write_phy_reg_10g(struct memac_mii_access_mem_map *mii_regs,
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fman_kg.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fman_kg.c
-@@ -30,6 +30,8 @@
-  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  */
- 
-+#include "std_ext.h"
-+#include "error_ext.h"
- #include "fsl_fman_kg.h"
- 
- /****************************************/
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fman_port.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fman_port.c
-@@ -31,6 +31,8 @@
-  */
- 
- 
-+#include "std_ext.h"
-+#include "error_ext.h"
- #include "common/general.h"
- 
- #include "fman_common.h"
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fman.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fman.c
-@@ -31,6 +31,8 @@
-  */
- 
- 
-+#include "std_ext.h"
-+#include "error_ext.h"
- #include <linux/math64.h>
- #include "fsl_fman.h"
- #include "dpaa_integration_ext.h"
diff --git a/target/linux/layerscape/patches-5.4/701-net-0031-sdk_dpaa-ls1043a-errata-maintain-timestamp-info.patch b/target/linux/layerscape/patches-5.4/701-net-0031-sdk_dpaa-ls1043a-errata-maintain-timestamp-info.patch
deleted file mode 100644
index e7fd78cae1..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0031-sdk_dpaa-ls1043a-errata-maintain-timestamp-info.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From 2af4c8f51e2a55173f412ea51d5715378bba15be Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Thu, 14 Sep 2017 10:40:53 +0300
-Subject: [PATCH] sdk_dpaa: ls1043a errata: maintain timestamp info
-
-When creating a new skb for the errata workaround, maintain the socket
-and timestamp configurations for timestamp hardware offloading.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c  | 44 +++++++++++++++-------
- 1 file changed, 31 insertions(+), 13 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -42,6 +42,7 @@
- #include <linux/skbuff.h>
- #include <linux/highmem.h>
- #include <linux/fsl_bman.h>
-+#include <net/sock.h>
- 
- #include "dpaa_eth.h"
- #include "dpaa_eth_common.h"
-@@ -808,7 +809,11 @@ static struct sk_buff *a010022_realign_s
- 	struct page *npage;
- 	void *npage_addr;
- 
--	headroom = priv->tx_headroom;
-+	/* Guarantee the minimum required headroom */
-+	if (skb_headroom(skb) >= priv->tx_headroom)
-+		headroom = skb_headroom(skb);
-+	else
-+		headroom = priv->tx_headroom;
- 
- 	npage = alloc_page(GFP_ATOMIC);
- 	if (unlikely(!npage)) {
-@@ -832,8 +837,11 @@ static struct sk_buff *a010022_realign_s
- 	if (unlikely(!nskb))
- 		goto err;
- 
--	/* Code borrowed and adapted from skb_copy() */
--	skb_reserve(nskb, headroom);
-+	/* Reserve only the needed headroom in order to guarantee the data's
-+	 * alignment.
-+	 * Code borrowed and adapted from skb_copy().
-+	 */
-+	skb_reserve(nskb, priv->tx_headroom);
- 	skb_put(nskb, skb->len);
- 	if (skb_copy_bits(skb, 0, nskb->data, skb->len)) {
- 		WARN_ONCE(1, "skb parsing failure\n");
-@@ -841,6 +849,16 @@ static struct sk_buff *a010022_realign_s
- 	}
- 	copy_skb_header(nskb, skb);
- 
-+#ifdef CONFIG_FSL_DPAA_TS
-+	/* Copy relevant timestamp info from the old skb to the new */
-+	if (priv->ts_tx_en) {
-+		skb_shinfo(nskb)->tx_flags = skb_shinfo(skb)->tx_flags;
-+		skb_shinfo(nskb)->hwtstamps = skb_shinfo(skb)->hwtstamps;
-+		skb_shinfo(nskb)->tskey = skb_shinfo(skb)->tskey;
-+		if (skb->sk)
-+			skb_set_owner_w(nskb, skb->sk);
-+	}
-+#endif
- 	/* We move the headroom when we align it so we have to reset the
- 	 * network and transport header offsets relative to the new data
- 	 * pointer. The checksum offload relies on these offsets.
-@@ -1041,6 +1059,16 @@ int __hot dpa_tx_extended(struct sk_buff
- 
- 	clear_fd(&fd);
- 
-+#ifndef CONFIG_PPC
-+	if (unlikely(dpaa_errata_a010022) && a010022_check_skb(skb, priv)) {
-+		skb = a010022_realign_skb(skb, priv);
-+		if (!skb)
-+			goto skb_to_fd_failed;
-+	}
-+#endif
-+
-+	nonlinear = skb_is_nonlinear(skb);
-+
- #ifdef CONFIG_FSL_DPAA_1588
- 	if (priv->tsu && priv->tsu->valid && priv->tsu->hwts_tx_en_ioctl)
- 		fd.cmd |= FM_FD_CMD_UPD;
-@@ -1052,16 +1080,6 @@ int __hot dpa_tx_extended(struct sk_buff
- 	skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
- #endif /* CONFIG_FSL_DPAA_TS */
- 
--#ifndef CONFIG_PPC
--	if (unlikely(dpaa_errata_a010022) && a010022_check_skb(skb, priv)) {
--		skb = a010022_realign_skb(skb, priv);
--		if (!skb)
--			goto skb_to_fd_failed;
--	}
--#endif
--
--	nonlinear = skb_is_nonlinear(skb);
--
- 	/* MAX_SKB_FRAGS is larger than our DPA_SGT_MAX_ENTRIES; make sure
- 	 * we don't feed FMan with more fragments than it supports.
- 	 * Btw, we're using the first sgt entry to store the linear part of
diff --git a/target/linux/layerscape/patches-5.4/701-net-0032-sdk_dpaa-ls1043a-errata-restrict-the-max-mtu.patch b/target/linux/layerscape/patches-5.4/701-net-0032-sdk_dpaa-ls1043a-errata-restrict-the-max-mtu.patch
deleted file mode 100644
index 7b70452a08..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0032-sdk_dpaa-ls1043a-errata-restrict-the-max-mtu.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From b204d76e9a64ec99f0151b7ca018f3b6df2bb1b7 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 19 Sep 2017 11:30:50 +0300
-Subject: [PATCH] sdk_dpaa: ls1043a errata: restrict the max mtu
-
-We can not allow for Jumbo frames and large MTU values on LS1043A due to
-the A-010022 FMan errata. All outgoing frames larger than 4K bytes are dropped.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-@@ -263,7 +263,16 @@ EXPORT_SYMBOL(dpa_get_stats64);
- 
- int dpa_change_mtu(struct net_device *net_dev, int new_mtu)
- {
--	const int max_mtu = dpa_get_max_mtu();
-+	int max_mtu = dpa_get_max_mtu();
-+
-+#ifndef CONFIG_PPC
-+	/* Due to the A010022 FMan errata, we can not use contig frames larger
-+	 * than 4K, nor S/G frames. We need to prevent the user from setting a
-+	 * large MTU.
-+	 */
-+	if (unlikely(dpaa_errata_a010022))
-+		max_mtu = DPA_BP_RAW_SIZE;
-+#endif
- 
- 	/* Make sure we don't exceed the Ethernet controller's MAXFRM */
- 	if (new_mtu < 68 || new_mtu > max_mtu) {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0033-sdk_dpaa-adapt-to-the-new-API-for-MTU-changes.patch b/target/linux/layerscape/patches-5.4/701-net-0033-sdk_dpaa-adapt-to-the-new-API-for-MTU-changes.patch
deleted file mode 100644
index a69e4c51c5..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0033-sdk_dpaa-adapt-to-the-new-API-for-MTU-changes.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 828ec34f1fade88f1e751b7000959aaddfe44e5c Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Thu, 21 Sep 2017 10:50:57 +0300
-Subject: [PATCH] sdk_dpaa: adapt to the new API for MTU changes
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c | 14 +++++++++++-
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_common.c  | 25 ----------------------
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_common.h  |  1 -
- 3 files changed, 13 insertions(+), 27 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-@@ -681,7 +681,6 @@ static const struct net_device_ops dpa_p
- #ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
- 	.ndo_select_queue = dpa_select_queue,
- #endif
--	.ndo_change_mtu = dpa_change_mtu,
- 	.ndo_set_rx_mode = dpa_set_rx_mode,
- 	.ndo_init = dpa_ndo_init,
- 	.ndo_set_features = dpa_set_features,
-@@ -758,6 +757,19 @@ static int dpa_private_netdev_init(struc
- 	net_dev->mem_start = priv->mac_dev->res->start;
- 	net_dev->mem_end = priv->mac_dev->res->end;
- 
-+	/* Configure the maximum MTU according to the FMan's MAXFRM */
-+	net_dev->min_mtu = ETH_MIN_MTU;
-+	net_dev->max_mtu = dpa_get_max_mtu();
-+
-+#ifndef CONFIG_PPC
-+	/* Due to the A010022 FMan errata, we can not use contig frames larger
-+	 * than 4K, nor S/G frames. We need to prevent the user from setting a
-+	 * large MTU.
-+	 */
-+	if (unlikely(dpaa_errata_a010022))
-+		net_dev->max_mtu = DPA_BP_RAW_SIZE;
-+#endif
-+
- 	net_dev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
- 		NETIF_F_LLTX);
- 
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-@@ -261,31 +261,6 @@ dpa_get_stats64(struct net_device *net_d
- }
- EXPORT_SYMBOL(dpa_get_stats64);
- 
--int dpa_change_mtu(struct net_device *net_dev, int new_mtu)
--{
--	int max_mtu = dpa_get_max_mtu();
--
--#ifndef CONFIG_PPC
--	/* Due to the A010022 FMan errata, we can not use contig frames larger
--	 * than 4K, nor S/G frames. We need to prevent the user from setting a
--	 * large MTU.
--	 */
--	if (unlikely(dpaa_errata_a010022))
--		max_mtu = DPA_BP_RAW_SIZE;
--#endif
--
--	/* Make sure we don't exceed the Ethernet controller's MAXFRM */
--	if (new_mtu < 68 || new_mtu > max_mtu) {
--		netdev_err(net_dev, "Invalid L3 mtu %d (must be between %d and %d).\n",
--				new_mtu, 68, max_mtu);
--		return -EINVAL;
--	}
--	net_dev->mtu = new_mtu;
--
--	return 0;
--}
--EXPORT_SYMBOL(dpa_change_mtu);
--
- /* .ndo_init callback */
- int dpa_ndo_init(struct net_device *net_dev)
- {
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.h
-@@ -143,7 +143,6 @@ void __cold dpa_timeout(struct net_devic
- void __cold
- dpa_get_stats64(struct net_device *net_dev,
- 		struct rtnl_link_stats64 *stats);
--int dpa_change_mtu(struct net_device *net_dev, int new_mtu);
- int dpa_ndo_init(struct net_device *net_dev);
- int dpa_set_features(struct net_device *dev, netdev_features_t features);
- netdev_features_t dpa_fix_features(struct net_device *dev,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0034-Extend-FM-MAC-Statistics-with-frame-size-counters-re.patch b/target/linux/layerscape/patches-5.4/701-net-0034-Extend-FM-MAC-Statistics-with-frame-size-counters-re.patch
deleted file mode 100644
index d880cc8aa6..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0034-Extend-FM-MAC-Statistics-with-frame-size-counters-re.patch
+++ /dev/null
@@ -1,406 +0,0 @@
-From 60f5101cdfbabd4cc29c02d69aa43a84fab52cf7 Mon Sep 17 00:00:00 2001
-From: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
-Date: Thu, 12 Oct 2017 11:13:41 +0300
-Subject: [PATCH] Extend FM MAC Statistics with frame size counters (request
- from Nokia)
-
-Signed-off-by: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
----
- .../freescale/sdk_fman/Peripherals/FM/MAC/dtsec.c  |  1 +
- .../freescale/sdk_fman/Peripherals/FM/MAC/fm_mac.c | 16 ++++++
- .../freescale/sdk_fman/Peripherals/FM/MAC/fm_mac.h |  1 +
- .../sdk_fman/Peripherals/FM/MAC/fman_memac.c       | 21 ++++++++
- .../freescale/sdk_fman/Peripherals/FM/MAC/memac.c  | 57 ++++++++++++++++++++++
- .../freescale/sdk_fman/Peripherals/FM/MAC/tgec.c   | 42 ++++++++++++++++
- .../sdk_fman/inc/Peripherals/fm_mac_ext.h          | 28 +++++++++++
- .../freescale/sdk_fman/inc/flib/fsl_fman_memac.h   |  7 +++
- .../sdk_fman/src/inc/wrapper/lnxwrp_exp_sym.h      |  2 +
- .../sdk_fman/src/wrapper/lnxwrp_ioctls_fm.c        | 41 ++++++++++++++++
- .../uapi/linux/fmd/Peripherals/fm_port_ioctls.h    | 25 ++++++++++
- 11 files changed, 241 insertions(+)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/dtsec.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/dtsec.c
-@@ -1389,6 +1389,7 @@ static void InitFmMacControllerDriver(t_
- 
-     p_FmMacControllerDriver->f_FM_MAC_ResetCounters             = DtsecResetCounters;
-     p_FmMacControllerDriver->f_FM_MAC_GetStatistics             = DtsecGetStatistics;
-+    p_FmMacControllerDriver->f_FM_MAC_GetFrameSizeCounters		= NULL;
- 
-     p_FmMacControllerDriver->f_FM_MAC_ModifyMacAddr             = DtsecModifyMacAddress;
-     p_FmMacControllerDriver->f_FM_MAC_AddHashMacAddr            = DtsecAddHashMacAddress;
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fm_mac.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fm_mac.c
-@@ -461,6 +461,22 @@ t_Error FM_MAC_GetStatistics (t_Handle h
- 
- /* ......................................................................... */
- 
-+t_Error FM_MAC_GetFrameSizeCounters(t_Handle h_FmMac, t_FmMacFrameSizeCounters *p_FrameSizeCounters, e_CommMode type)
-+{
-+    t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_FmMacControllerDriver, E_INVALID_HANDLE);
-+
-+    memset(p_FrameSizeCounters, 0, sizeof(t_FmMacFrameSizeCounters));
-+
-+    if (p_FmMacControllerDriver->f_FM_MAC_GetFrameSizeCounters)
-+        return p_FmMacControllerDriver->f_FM_MAC_GetFrameSizeCounters(h_FmMac, p_FrameSizeCounters, type);
-+
-+    RETURN_ERROR(MINOR, E_NOT_SUPPORTED, NO_MSG);
-+}
-+
-+/* ......................................................................... */
-+
- t_Error FM_MAC_ModifyMacAddr (t_Handle h_FmMac, t_EnetAddr *p_EnetAddr)
- {
-     t_FmMacControllerDriver *p_FmMacControllerDriver = (t_FmMacControllerDriver *)h_FmMac;
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fm_mac.h
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fm_mac.h
-@@ -106,6 +106,7 @@ typedef struct {
- 
-     t_Error (*f_FM_MAC_ResetCounters) (t_Handle h_FmMac);
-     t_Error (*f_FM_MAC_GetStatistics) (t_Handle h_FmMac, t_FmMacStatistics *p_Statistics);
-+    t_Error (*f_FM_MAC_GetFrameSizeCounters) (t_Handle h_FmMac, t_FmMacFrameSizeCounters *p_FrameSizeCounters, e_CommMode type);
- 
-     t_Error (*f_FM_MAC_ModifyMacAddr) (t_Handle h_FmMac, t_EnetAddr *p_EnetAddr);
-     t_Error (*f_FM_MAC_AddHashMacAddr) (t_Handle h_FmMac, t_EnetAddr *p_EnetAddr);
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_memac.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/fman_memac.c
-@@ -360,24 +360,45 @@ uint64_t fman_memac_get_counter(struct m
-     case E_MEMAC_COUNTER_R64:
-         ret_val = GET_MEMAC_CNTR_64(r64);
-         break;
-+    case E_MEMAC_COUNTER_T64:
-+        ret_val = GET_MEMAC_CNTR_64(t64);
-+        break;
-     case E_MEMAC_COUNTER_R127:
-         ret_val = GET_MEMAC_CNTR_64(r127);
-         break;
-+    case E_MEMAC_COUNTER_T127:
-+        ret_val = GET_MEMAC_CNTR_64(t127);
-+        break;
-     case E_MEMAC_COUNTER_R255:
-         ret_val = GET_MEMAC_CNTR_64(r255);
-         break;
-+    case E_MEMAC_COUNTER_T255:
-+        ret_val = GET_MEMAC_CNTR_64(t255);
-+        break;
-     case E_MEMAC_COUNTER_R511:
-         ret_val = GET_MEMAC_CNTR_64(r511);
-         break;
-+    case E_MEMAC_COUNTER_T511:
-+        ret_val = GET_MEMAC_CNTR_64(t511);
-+        break;
-     case E_MEMAC_COUNTER_R1023:
-         ret_val = GET_MEMAC_CNTR_64(r1023);
-         break;
-+    case E_MEMAC_COUNTER_T1023:
-+        ret_val = GET_MEMAC_CNTR_64(t1023);
-+        break;
-     case E_MEMAC_COUNTER_R1518:
-         ret_val = GET_MEMAC_CNTR_64(r1518);
-         break;
-+    case E_MEMAC_COUNTER_T1518:
-+        ret_val = GET_MEMAC_CNTR_64(t1518);
-+        break;
-     case E_MEMAC_COUNTER_R1519X:
-         ret_val = GET_MEMAC_CNTR_64(r1519x);
-         break;
-+    case E_MEMAC_COUNTER_T1519X:
-+        ret_val = GET_MEMAC_CNTR_64(t1519x);
-+        break;
-     case E_MEMAC_COUNTER_RFRG:
-         ret_val = GET_MEMAC_CNTR_64(rfrg);
-         break;
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.c
-@@ -593,6 +593,62 @@ static t_Error MemacGetStatistics(t_Hand
- 
- /* ......................................................................... */
- 
-+static t_Error MemacGetFrameSizeCounters(t_Handle h_Memac, t_FmMacFrameSizeCounters *p_FrameSizeCounters, e_CommMode type)
-+{
-+    t_Memac     *p_Memac = (t_Memac *)h_Memac;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Memac, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FrameSizeCounters, E_NULL_POINTER);
-+
-+    switch (type)
-+    {
-+    case e_COMM_MODE_NONE:
-+    	break;
-+
-+    case e_COMM_MODE_RX:
-+        p_FrameSizeCounters->count_pkts_64             = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R64);
-+        p_FrameSizeCounters->count_pkts_65_to_127      = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R127);
-+        p_FrameSizeCounters->count_pkts_128_to_255     = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R255);
-+        p_FrameSizeCounters->count_pkts_256_to_511     = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R511);
-+        p_FrameSizeCounters->count_pkts_512_to_1023    = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R1023);
-+        p_FrameSizeCounters->count_pkts_1024_to_1518   = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R1518);
-+        p_FrameSizeCounters->count_pkts_1519_to_1522   = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R1519X);
-+    	break;
-+
-+    case e_COMM_MODE_TX:
-+        p_FrameSizeCounters->count_pkts_64             = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_T64);
-+        p_FrameSizeCounters->count_pkts_65_to_127      = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_T127);
-+        p_FrameSizeCounters->count_pkts_128_to_255     = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_T255);
-+        p_FrameSizeCounters->count_pkts_256_to_511     = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_T511);
-+        p_FrameSizeCounters->count_pkts_512_to_1023    = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_T1023);
-+        p_FrameSizeCounters->count_pkts_1024_to_1518   = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_T1518);
-+        p_FrameSizeCounters->count_pkts_1519_to_1522   = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_T1519X);
-+    	break;
-+
-+    case e_COMM_MODE_RX_AND_TX:
-+        p_FrameSizeCounters->count_pkts_64             = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R64)
-+                                                       + fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_T64);
-+        p_FrameSizeCounters->count_pkts_65_to_127      = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R127)
-+                                                       + fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_T127);
-+        p_FrameSizeCounters->count_pkts_128_to_255     = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R255)
-+                                                       + fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_T255);
-+        p_FrameSizeCounters->count_pkts_256_to_511     = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R511)
-+                                                       + fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_T511);
-+        p_FrameSizeCounters->count_pkts_512_to_1023    = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R1023)
-+                                                       + fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_T1023);
-+        p_FrameSizeCounters->count_pkts_1024_to_1518   = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R1518)
-+                                                       + fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_T1518);
-+        p_FrameSizeCounters->count_pkts_1519_to_1522   = fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_R1519X)
-+                                                       + fman_memac_get_counter(p_Memac->p_MemMap, E_MEMAC_COUNTER_T1519X);
-+    	break;
-+    }
-+
-+    return E_OK;
-+}
-+
-+/* ......................................................................... */
-+
- static t_Error MemacModifyMacAddress (t_Handle h_Memac, t_EnetAddr *p_EnetAddr)
- {
-     t_Memac     *p_Memac = (t_Memac *)h_Memac;
-@@ -1025,6 +1081,7 @@ static void InitFmMacControllerDriver(t_
- 
-     p_FmMacControllerDriver->f_FM_MAC_ResetCounters             = MemacResetCounters;
-     p_FmMacControllerDriver->f_FM_MAC_GetStatistics             = MemacGetStatistics;
-+    p_FmMacControllerDriver->f_FM_MAC_GetFrameSizeCounters      = MemacGetFrameSizeCounters;
- 
-     p_FmMacControllerDriver->f_FM_MAC_ModifyMacAddr             = MemacModifyMacAddress;
-     p_FmMacControllerDriver->f_FM_MAC_AddHashMacAddr            = MemacAddHashMacAddress;
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/tgec.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/tgec.c
-@@ -438,6 +438,47 @@ static t_Error TgecGetStatistics(t_Handl
- 
- /* ......................................................................... */
- 
-+static t_Error TgecGetFrameSizeCounters(t_Handle h_Tgec, t_FmMacFrameSizeCounters *p_FrameSizeCounters, e_CommMode type)
-+{
-+    t_Tgec              *p_Tgec = (t_Tgec *)h_Tgec;
-+    struct tgec_regs    *p_TgecMemMap;
-+
-+    SANITY_CHECK_RETURN_ERROR(p_Tgec, E_NULL_POINTER);
-+    SANITY_CHECK_RETURN_ERROR(!p_Tgec->p_TgecDriverParam, E_INVALID_STATE);
-+    SANITY_CHECK_RETURN_ERROR(p_FrameSizeCounters, E_NULL_POINTER);
-+
-+    p_TgecMemMap = p_Tgec->p_MemMap;
-+
-+    switch (type)
-+    {
-+    case e_COMM_MODE_NONE:
-+    	break;
-+
-+    case e_COMM_MODE_RX:
-+        p_FrameSizeCounters->count_pkts_64             = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_R64);
-+        p_FrameSizeCounters->count_pkts_65_to_127      = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_R127);
-+        p_FrameSizeCounters->count_pkts_128_to_255     = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_R255);
-+        p_FrameSizeCounters->count_pkts_256_to_511     = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_R511);
-+        p_FrameSizeCounters->count_pkts_512_to_1023    = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_R1023);
-+        p_FrameSizeCounters->count_pkts_1024_to_1518   = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_R1518);
-+        p_FrameSizeCounters->count_pkts_1519_to_1522   = fman_tgec_get_counter(p_TgecMemMap, E_TGEC_COUNTER_R1519X);
-+    	break;
-+
-+    case e_COMM_MODE_TX:
-+    	//Tx counters not supported
-+    	break;
-+
-+    case e_COMM_MODE_RX_AND_TX:
-+    	//Tx counters not supported
-+    	break;
-+    }
-+
-+    return E_OK;
-+}
-+
-+
-+/* ......................................................................... */
-+
- static t_Error TgecEnable1588TimeStamp(t_Handle h_Tgec)
- {
-     t_Tgec      *p_Tgec = (t_Tgec *)h_Tgec;
-@@ -905,6 +946,7 @@ static void InitFmMacControllerDriver(t_
- 
-     p_FmMacControllerDriver->f_FM_MAC_ResetCounters             = TgecResetCounters;
-     p_FmMacControllerDriver->f_FM_MAC_GetStatistics             = TgecGetStatistics;
-+    p_FmMacControllerDriver->f_FM_MAC_GetFrameSizeCounters      = TgecGetFrameSizeCounters;
- 
-     p_FmMacControllerDriver->f_FM_MAC_ModifyMacAddr             = TgecModifyMacAddress;
-     p_FmMacControllerDriver->f_FM_MAC_AddHashMacAddr            = TgecAddHashMacAddress;
---- a/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_mac_ext.h
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_mac_ext.h
-@@ -197,6 +197,19 @@ typedef struct t_FmMacStatistics {
-                                                - Other */
- } t_FmMacStatistics;
- 
-+/**************************************************************************//**
-+ @Description   FM MAC Frame Size Counters
-+*//***************************************************************************/
-+typedef struct t_FmMacFrameSizeCounters {
-+
-+        uint64_t  count_pkts_64;            /**< 64 byte frame counter */
-+        uint64_t  count_pkts_65_to_127;     /**< 65 to 127 byte frame counter */
-+        uint64_t  count_pkts_128_to_255;    /**< 128 to 255 byte frame counter */
-+        uint64_t  count_pkts_256_to_511;    /**< 256 to 511 byte frame counter */
-+        uint64_t  count_pkts_512_to_1023;   /**< 512 to 1023 byte frame counter */
-+        uint64_t  count_pkts_1024_to_1518;  /**< 1024 to 1518 byte frame counter */
-+        uint64_t  count_pkts_1519_to_1522;  /**< 1519 to 1522 byte good frame count */
-+} t_FmMacFrameSizeCounters;
- 
- /**************************************************************************//**
-  @Group         FM_mac_init_grp FM MAC Initialization Unit
-@@ -654,6 +667,21 @@ t_Error FM_MAC_SetStatistics(t_Handle h_
- t_Error FM_MAC_GetStatistics(t_Handle h_FmMac, t_FmMacStatistics *p_Statistics);
- 
- /**************************************************************************//**
-+ @Function      FM_MAC_GetFrameSizeCounters
-+
-+ @Description   get MAC statistics counters for different frame size
-+
-+ @Param[in]     h_FmMac       -  A handle to a FM MAC Module.
-+ @Param[in]     p_FrameSizeCounters  -  Structure with counters
-+ @Param[in]     type  				-  Type of counters to be read
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+t_Error FM_MAC_GetFrameSizeCounters(t_Handle h_FmMac, t_FmMacFrameSizeCounters *p_FrameSizeCounters, e_CommMode type);
-+
-+/**************************************************************************//**
-  @Function      FM_MAC_ModifyMacAddr
- 
-  @Description   Replace the main MAC Address
---- a/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_memac.h
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_memac.h
-@@ -146,12 +146,19 @@ _val &= ~TX_FIFO_SECTIONS_TX_EMPTY_MASK;
- 
- enum memac_counters {
- 	E_MEMAC_COUNTER_R64,
-+	E_MEMAC_COUNTER_T64,
- 	E_MEMAC_COUNTER_R127,
-+	E_MEMAC_COUNTER_T127,
- 	E_MEMAC_COUNTER_R255,
-+	E_MEMAC_COUNTER_T255,
- 	E_MEMAC_COUNTER_R511,
-+	E_MEMAC_COUNTER_T511,
- 	E_MEMAC_COUNTER_R1023,
-+	E_MEMAC_COUNTER_T1023,
- 	E_MEMAC_COUNTER_R1518,
-+	E_MEMAC_COUNTER_T1518,
- 	E_MEMAC_COUNTER_R1519X,
-+	E_MEMAC_COUNTER_T1519X,
- 	E_MEMAC_COUNTER_RFRG,
- 	E_MEMAC_COUNTER_RJBR,
- 	E_MEMAC_COUNTER_RDRP,
---- a/drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/lnxwrp_exp_sym.h
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/lnxwrp_exp_sym.h
-@@ -123,6 +123,8 @@ EXPORT_SYMBOL(FM_PCD_SetAdvancedOffloadS
- /* FMAN MAC exported routines */
- EXPORT_SYMBOL(FM_MAC_GetStatistics);
- 
-+EXPORT_SYMBOL(FM_MAC_GetFrameSizeCounters);
-+
- EXPORT_SYMBOL(FM_GetSpecialOperationCoding);
- 
- #endif /* __LNXWRP_EXP_SYM_H */
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm.c
-@@ -4608,6 +4608,47 @@ t_Error LnxwrpFmPortIOCTL(t_LnxWrpFmPort
-             break;
-         }
- 
-+        case FM_PORT_IOC_GET_MAC_FRAME_SIZE_COUNTERS:
-+        {
-+            t_LnxWrpFmDev *p_LnxWrpFmDev =
-+                    (t_LnxWrpFmDev *)p_LnxWrpFmPortDev->h_LnxWrpFmDev;
-+            ioc_fm_port_mac_frame_size_counters_t param;
-+            t_FmMacFrameSizeCounters frameSizeCounters;
-+            int mac_id = p_LnxWrpFmPortDev->id;
-+
-+            if (!p_LnxWrpFmDev)
-+                RETURN_ERROR(MINOR, E_NOT_AVAILABLE, ("Port not initialized or other error!"));
-+
-+            if (&p_LnxWrpFmDev->txPorts[mac_id] != p_LnxWrpFmPortDev &&
-+                &p_LnxWrpFmDev->rxPorts[mac_id] != p_LnxWrpFmPortDev)
-+                mac_id += FM_MAX_NUM_OF_1G_MACS; /* 10G port */
-+
-+            if (!p_LnxWrpFmDev->macs[mac_id].h_Dev)
-+                RETURN_ERROR(MINOR, E_NOT_AVAILABLE, ("Port not initialized or other error!"));
-+
-+            if (copy_from_user(&param, (ioc_fm_port_mac_frame_size_counters_t *)arg,
-+                        sizeof(ioc_fm_port_mac_frame_size_counters_t)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+            if (FM_MAC_GetFrameSizeCounters(p_LnxWrpFmDev->macs[mac_id].h_Dev,
-+                        &frameSizeCounters, param.type))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+            param.count_pkts_64 = frameSizeCounters.count_pkts_64;
-+            param.count_pkts_65_to_127 = frameSizeCounters.count_pkts_65_to_127;
-+            param.count_pkts_128_to_255 = frameSizeCounters.count_pkts_128_to_255;
-+            param.count_pkts_256_to_511 = frameSizeCounters.count_pkts_256_to_511;
-+            param.count_pkts_512_to_1023 = frameSizeCounters.count_pkts_512_to_1023;
-+            param.count_pkts_1024_to_1518 = frameSizeCounters.count_pkts_1024_to_1518;
-+            param.count_pkts_1519_to_1522 = frameSizeCounters.count_pkts_1519_to_1522;
-+
-+            if (copy_to_user((ioc_fm_port_mac_frame_size_counters_t *)arg, &param,
-+                        sizeof(ioc_fm_port_mac_frame_size_counters_t)))
-+                RETURN_ERROR(MINOR, E_WRITE_FAILED, NO_MSG);
-+
-+            break;
-+        }
-+
-         case FM_PORT_IOC_GET_BMI_COUNTERS:
-         {
-             t_LnxWrpFmDev *p_LnxWrpFmDev =
---- a/include/uapi/linux/fmd/Peripherals/fm_port_ioctls.h
-+++ b/include/uapi/linux/fmd/Peripherals/fm_port_ioctls.h
-@@ -939,6 +939,31 @@ typedef struct ioc_fm_port_vsp_alloc_par
- 
- #define FM_PORT_IOC_GET_BMI_COUNTERS _IOR(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(42), ioc_fm_port_bmi_stats_t)
- 
-+typedef struct ioc_fm_port_mac_frame_size_counters_t {
-+
-+        e_CommMode type;
-+        uint64_t  count_pkts_64;            /**< 64 byte frame counter */
-+        uint64_t  count_pkts_65_to_127;     /**< 65 to 127 byte frame counter */
-+        uint64_t  count_pkts_128_to_255;    /**< 128 to 255 byte frame counter */
-+        uint64_t  count_pkts_256_to_511;    /**< 256 to 511 byte frame counter */
-+        uint64_t  count_pkts_512_to_1023;   /**< 512 to 1023 byte frame counter */
-+        uint64_t  count_pkts_1024_to_1518;  /**< 1024 to 1518 byte frame counter */
-+        uint64_t  count_pkts_1519_to_1522;  /**< 1519 to 1522 byte good frame count */
-+} ioc_fm_port_mac_frame_size_counters_t;
-+
-+/**************************************************************************//**
-+ @Function      FM_MAC_GetFrameSizeCounters
-+
-+ @Description   get MAC statistics counters for different frame size
-+
-+ @Param[out]    ioc_fm_port_mac_frame_size_counters_t    A structure holding the counters
-+
-+ @Return        E_OK on success; Error code otherwise.
-+
-+ @Cautions      Allowed only following FM_Init().
-+*//***************************************************************************/
-+#define FM_PORT_IOC_GET_MAC_FRAME_SIZE_COUNTERS        _IOR(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(43), ioc_fm_port_mac_frame_size_counters_t)
-+
- 
- /** @} */ /* end of lnx_ioctl_FM_PORT_pcd_runtime_control_grp group */
- /** @} */ /* end of lnx_ioctl_FM_PORT_runtime_control_grp group */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0035-sdk_dpaa-accept-frames-on-RX-even-if-larger-than-MTU.patch b/target/linux/layerscape/patches-5.4/701-net-0035-sdk_dpaa-accept-frames-on-RX-even-if-larger-than-MTU.patch
deleted file mode 100644
index d868498de4..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0035-sdk_dpaa-accept-frames-on-RX-even-if-larger-than-MTU.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From ab1371fec54bdd16b5f6c56c76d817404c696d4b Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 18 Oct 2017 16:38:30 +0300
-Subject: [PATCH] sdk_dpaa: accept frames on RX even if larger than MTU
-
-Documentation/networking/netdevices.txt mentions that interfaces must
-be able to receive frames at least the size of the configured MTU. The
-behavior for received frames larger than the MTU is unspecified. We have
-been dropping these frames in software. Remove this behavior and accept
-them.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h    | 11 -----------
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 11 -----------
- 2 files changed, 22 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-@@ -514,17 +514,6 @@ dpa_fd_offset(const struct qm_fd *fd)
- 	return fd->offset;
- }
- 
--/* Verifies if the skb length is below the interface MTU */
--static inline int dpa_check_rx_mtu(struct sk_buff *skb, int mtu)
--{
--	if (unlikely(skb->len > mtu))
--		if ((skb->protocol != htons(ETH_P_8021Q))
--				|| (skb->len > mtu + 4))
--			return -1;
--
--	return 0;
--}
--
- static inline uint16_t dpa_get_headroom(struct dpa_buffer_layout_s *bl)
- {
- 	uint16_t headroom;
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -616,13 +616,6 @@ void __hot _dpa_rx(struct net_device *ne
- 	(*count_ptr)--;
- 	skb->protocol = eth_type_trans(skb, net_dev);
- 
--	/* IP Reassembled frames are allowed to be larger than MTU */
--	if (unlikely(dpa_check_rx_mtu(skb, net_dev->mtu) &&
--		!(fd_status & FM_FD_IPR))) {
--		percpu_stats->rx_dropped++;
--		goto drop_bad_frame;
--	}
--
- 	skb_len = skb->len;
- 
- #ifdef CONFIG_FSL_DPAA_DBG_LOOP
-@@ -655,10 +648,6 @@ void __hot _dpa_rx(struct net_device *ne
- packet_dropped:
- 	return;
- 
--drop_bad_frame:
--	dev_kfree_skb(skb);
--	return;
--
- _release_frame:
- 	dpa_fd_release(net_dev, fd);
- }
diff --git a/target/linux/layerscape/patches-5.4/701-net-0036-sdk-dpa-use-netdev-dev-for-DMA-mapping.patch b/target/linux/layerscape/patches-5.4/701-net-0036-sdk-dpa-use-netdev-dev-for-DMA-mapping.patch
deleted file mode 100644
index 39631c32f0..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0036-sdk-dpa-use-netdev-dev-for-DMA-mapping.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From e1ae30545347709590bab5f4a3c27e7f639c6ead Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Wed, 18 Oct 2017 19:36:59 +0300
-Subject: [PATCH] sdk: dpa: use netdev dev for DMA mapping
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c |  2 +-
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_base.c    |  2 +-
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_common.c  | 35 ++++------------------
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_common.h  |  2 +-
- 4 files changed, 9 insertions(+), 32 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-@@ -875,7 +875,7 @@ static int dpa_priv_bp_create(struct net
- 
- 	for (i = 0; i < count; i++) {
- 		int err;
--		err = dpa_bp_alloc(&dpa_bp[i]);
-+		err = dpa_bp_alloc(&dpa_bp[i], net_dev->dev.parent);
- 		if (err < 0) {
- 			dpa_bp_free(priv);
- 			priv->dpa_bp = NULL;
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_base.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_base.c
-@@ -176,7 +176,7 @@ int dpa_bp_create(struct net_device *net
- 
- 	for (i = 0; i < count; i++) {
- 		int err;
--		err = dpa_bp_alloc(&dpa_bp[i]);
-+		err = dpa_bp_alloc(&dpa_bp[i], net_dev->dev.parent);
- 		if (err < 0) {
- 			dpa_bp_free(priv);
- 			priv->dpa_bp = NULL;
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-@@ -686,11 +686,10 @@ void dpa_set_buffers_layout(struct mac_d
- EXPORT_SYMBOL(dpa_set_buffers_layout);
- 
- int __attribute__((nonnull))
--dpa_bp_alloc(struct dpa_bp *dpa_bp)
-+dpa_bp_alloc(struct dpa_bp *dpa_bp, struct device *dev)
- {
- 	int err;
- 	struct bman_pool_params	 bp_params;
--	struct platform_device *pdev;
- 
- 	if (dpa_bp->size == 0 || dpa_bp->config_count == 0) {
- 		pr_err("Buffer pool is not properly initialized! Missing size or initial number of buffers");
-@@ -723,44 +722,25 @@ dpa_bp_alloc(struct dpa_bp *dpa_bp)
- 
- 	dpa_bp->bpid = (uint8_t)bman_get_params(dpa_bp->pool)->bpid;
- 
--	pdev = platform_device_register_simple("dpaa_eth_bpool",
--			dpa_bp->bpid, NULL, 0);
--	if (IS_ERR(pdev)) {
--		pr_err("platform_device_register_simple() failed\n");
--		err = PTR_ERR(pdev);
--		goto pdev_register_failed;
--	}
--	{
--		struct dma_map_ops *ops = get_dma_ops(&pdev->dev);
--		ops->dma_supported = NULL;
--	}
--	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40));
-+	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40));
- 	if (err) {
- 		pr_err("dma_coerce_mask_and_coherent() failed\n");
--		goto pdev_mask_failed;
-+		goto bman_free_pool;
- 	}
--#ifdef CONFIG_FMAN_ARM
--	/* force coherency */
--	pdev->dev.archdata.dma_coherent = true;
--	arch_setup_dma_ops(&pdev->dev, 0, 0, NULL, true);
--#endif
- 
--	dpa_bp->dev = &pdev->dev;
-+	dpa_bp->dev = dev;
- 
- 	if (dpa_bp->seed_cb) {
- 		err = dpa_bp->seed_cb(dpa_bp);
- 		if (err)
--			goto pool_seed_failed;
-+			goto bman_free_pool;
- 	}
- 
- 	dpa_bpid2pool_map(dpa_bp->bpid, dpa_bp);
- 
- 	return 0;
- 
--pool_seed_failed:
--pdev_mask_failed:
--	platform_device_unregister(pdev);
--pdev_register_failed:
-+bman_free_pool:
- 	bman_free_pool(dpa_bp->pool);
- 
- 	return err;
-@@ -822,9 +802,6 @@ _dpa_bp_free(struct dpa_bp *dpa_bp)
- 
- 	dpa_bp_array[bp->bpid] = NULL;
- 	bman_free_pool(bp->pool);
--
--	if (bp->dev)
--		platform_device_unregister(to_platform_device(bp->dev));
- }
- 
- void __cold __attribute__((nonnull))
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.h
-@@ -163,7 +163,7 @@ void dpa_set_rx_mode(struct net_device *
- void dpa_set_buffers_layout(struct mac_device *mac_dev,
- 		struct dpa_buffer_layout_s *layout);
- int __attribute__((nonnull))
--dpa_bp_alloc(struct dpa_bp *dpa_bp);
-+dpa_bp_alloc(struct dpa_bp *dpa_bp, struct device *dev);
- void __cold __attribute__((nonnull))
- dpa_bp_free(struct dpa_priv_s *priv);
- struct dpa_bp *dpa_bpid2pool(int bpid);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0037-Added-MII-IOCTL-support-for-SIOCGMIIREG.patch b/target/linux/layerscape/patches-5.4/701-net-0037-Added-MII-IOCTL-support-for-SIOCGMIIREG.patch
deleted file mode 100644
index 77c192713c..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0037-Added-MII-IOCTL-support-for-SIOCGMIIREG.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 7f87217ebf1ca84ad63d995d88eda45341273fad Mon Sep 17 00:00:00 2001
-From: Vicentiu Galanopulo <vicentiu.galanopulo@nxp.com>
-Date: Tue, 7 Nov 2017 16:15:03 +0200
-Subject: [PATCH] Added MII IOCTL support for SIOCGMIIREG
-
-Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c | 12 ++++++++----
- 1 file changed, 8 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-@@ -444,14 +444,18 @@ int dpa_ioctl(struct net_device *dev, st
- #ifdef CONFIG_FSL_DPAA_1588
- 	struct dpa_priv_s *priv = netdev_priv(dev);
- #endif
--	int ret = 0;
-+	int ret = -EINVAL;
- 
--	/* at least one timestamping feature must be enabled */
--#ifdef CONFIG_FSL_DPAA_TS
- 	if (!netif_running(dev))
--#endif
- 		return -EINVAL;
- 
-+	if (cmd == SIOCGMIIREG) {
-+		if (!dev->phydev)
-+			ret = -EINVAL;
-+		else
-+			ret = phy_mii_ioctl(dev->phydev, rq, cmd);
-+	}
-+
- #ifdef CONFIG_FSL_DPAA_TS
- 	if (cmd == SIOCSHWTSTAMP)
- 		return dpa_ts_ioctl(dev, rq, cmd);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0038-sdk_dpaa-ls1043a-errata-stop-advertising-S-G-and-GSO.patch b/target/linux/layerscape/patches-5.4/701-net-0038-sdk_dpaa-ls1043a-errata-stop-advertising-S-G-and-GSO.patch
deleted file mode 100644
index a7c87086eb..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0038-sdk_dpaa-ls1043a-errata-stop-advertising-S-G-and-GSO.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 4dc65101fc94270fec94599701343128c77da8fb Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 8 Nov 2017 14:37:27 +0200
-Subject: [PATCH] sdk_dpaa: ls1043a errata: stop advertising S/G and GSO
- support
-
-The errata prevents us from transmitting S/G frames. Instead of
-linearizing them ourselves, stop advertising S/G support and have the
-stack do it for us.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c | 21 ++++++++++++---------
- 1 file changed, 12 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-@@ -761,15 +761,6 @@ static int dpa_private_netdev_init(struc
- 	net_dev->min_mtu = ETH_MIN_MTU;
- 	net_dev->max_mtu = dpa_get_max_mtu();
- 
--#ifndef CONFIG_PPC
--	/* Due to the A010022 FMan errata, we can not use contig frames larger
--	 * than 4K, nor S/G frames. We need to prevent the user from setting a
--	 * large MTU.
--	 */
--	if (unlikely(dpaa_errata_a010022))
--		net_dev->max_mtu = DPA_BP_RAW_SIZE;
--#endif
--
- 	net_dev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
- 		NETIF_F_LLTX);
- 
-@@ -787,6 +778,18 @@ static int dpa_private_netdev_init(struc
- 	/* Advertise NETIF_F_HW_ACCEL_MQ to avoid Tx timeout warnings */
- 	net_dev->features |= NETIF_F_HW_ACCEL_MQ;
- 
-+#ifndef CONFIG_PPC
-+	/* Due to the A010022 FMan errata, we can not use contig frames larger
-+	 * than 4K, nor S/G frames. We need to prevent the user from setting a
-+	 * large MTU. We also stop advertising S/G and GSO support.
-+	 */
-+	if (unlikely(dpaa_errata_a010022)) {
-+		net_dev->max_mtu = DPA_BP_RAW_SIZE;
-+		net_dev->hw_features &= ~NETIF_F_SG;
-+		net_dev->features &= ~NETIF_F_GSO;
-+	}
-+#endif
-+
- 	return dpa_netdev_init(net_dev, mac_addr, tx_timeout);
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0039-staging-fsl_qbman-Calculate-valid-bit-from-MC-RR.patch b/target/linux/layerscape/patches-5.4/701-net-0039-staging-fsl_qbman-Calculate-valid-bit-from-MC-RR.patch
deleted file mode 100644
index 1e4cfe8069..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0039-staging-fsl_qbman-Calculate-valid-bit-from-MC-RR.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 5ebee96094c5a97a89a986108242cca9d853ff55 Mon Sep 17 00:00:00 2001
-From: Roy Pledge <roy.pledge@nxp.com>
-Date: Wed, 27 Sep 2017 14:50:08 -0400
-Subject: [PATCH] staging/fsl_qbman: Calculate valid bit from MC-RR
-
-Use the management commmand response registers to determine
-the next expected valid bit when initializing a software
-portal. This avoids using the wrong valid bit in cases
-where a command was partially written but then not
-completed.
-
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
----
- drivers/staging/fsl_qbman/qman_low.h | 19 +++++++++++++++++--
- 1 file changed, 17 insertions(+), 2 deletions(-)
-
---- a/drivers/staging/fsl_qbman/qman_low.h
-+++ b/drivers/staging/fsl_qbman/qman_low.h
-@@ -1095,11 +1095,26 @@ static inline void qm_mr_set_ithresh(str
- 
- static inline int qm_mc_init(struct qm_portal *portal)
- {
-+	u8 rr0, rr1;
- 	register struct qm_mc *mc = &portal->mc;
-+
- 	mc->cr = portal->addr.addr_ce + QM_CL_CR;
- 	mc->rr = portal->addr.addr_ce + QM_CL_RR0;
--	mc->rridx = (__raw_readb(&mc->cr->__dont_write_directly__verb) &
--			QM_MCC_VERB_VBIT) ?  0 : 1;
-+
-+	/*
-+	 * The expected valid bit polarity for the next CR command is 0
-+	 * if RR1 contains a valid response, and is 1 if RR0 contains a
-+	 * valid response. If both RR contain all 0, this indicates either
-+	 * that no command has been executed since reset (in which case the
-+	 * expected valid bit polarity is 1)
-+	 */
-+	rr0 = __raw_readb(&mc->rr->verb);
-+	rr1 = __raw_readb(&(mc->rr+1)->verb);
-+	if ((rr0 == 0 && rr1 == 0) || rr0 != 0)
-+		mc->rridx = 1;
-+	else
-+		mc->rridx = 0;
-+
- 	mc->vbit = mc->rridx ? QM_MCC_VERB_VBIT : 0;
- #ifdef CONFIG_FSL_DPA_CHECKING
- 	mc->state = qman_mc_idle;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0040-fsl_qbman-usdpaa-Invalidate-software-portals-before-.patch b/target/linux/layerscape/patches-5.4/701-net-0040-fsl_qbman-usdpaa-Invalidate-software-portals-before-.patch
deleted file mode 100644
index 5148f444dc..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0040-fsl_qbman-usdpaa-Invalidate-software-portals-before-.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 6506f95ad4d47500275c2f3a48abb7f3de11c54b Mon Sep 17 00:00:00 2001
-From: Roy Pledge <roy.pledge@nxp.com>
-Date: Thu, 25 May 2017 16:59:08 -0400
-Subject: [PATCH] fsl_qbman/usdpaa: Invalidate software portals before use
-
-Invalidate the cache for the software portals before using them
-since the portals are non coherent. This ensures that the core
-using the portal is seeing the most up to date information in
-case the cache contained older data. This is important during
-the cleanup phase if cleanup occurs on a differnt core than
-what the application was using.
-
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
----
- drivers/staging/fsl_qbman/fsl_usdpaa.c | 24 ++++++++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/drivers/staging/fsl_qbman/fsl_usdpaa.c
-+++ b/drivers/staging/fsl_qbman/fsl_usdpaa.c
-@@ -371,6 +371,16 @@ static int usdpaa_open(struct inode *ino
- 
- #define DQRR_MAXFILL 15
- 
-+
-+/* Invalidate a portal */
-+void dbci_portal(void *addr)
-+{
-+	int i;
-+
-+	for (i = 0; i < 0x4000; i += 64)
-+		dcbi(addr + i);
-+}
-+
- /* Reset a QMan portal to its default state */
- static int init_qm_portal(struct qm_portal_config *config,
- 			  struct qm_portal *portal)
-@@ -384,6 +394,13 @@ static int init_qm_portal(struct qm_port
- 	/* Make sure interrupts are inhibited */
- 	qm_out(IIR, 1);
- 
-+	/*
-+	 * Invalidate the entire CE portal are to ensure no stale
-+	 * cachelines are present.  This should be done on all
-+	 * cores as the portal is mapped as M=0 (non-coherent).
-+	 */
-+	on_each_cpu(dbci_portal, portal->addr.addr_ce, 1);
-+
- 	/* Initialize the DQRR.  This will stop any dequeue
- 	   commands that are in progress */
- 	if (qm_dqrr_init(portal, config, qm_dqrr_dpush, qm_dqrr_pvb,
-@@ -435,6 +452,13 @@ static int init_bm_portal(struct bm_port
- 	portal->addr.addr_ce = config->addr_virt[DPA_PORTAL_CE];
- 	portal->addr.addr_ci = config->addr_virt[DPA_PORTAL_CI];
- 
-+	/*
-+	 * Invalidate the entire CE portal are to ensure no stale
-+	 * cachelines are present.  This should be done on all
-+	 * cores as the portal is mapped as M=0 (non-coherent).
-+	 */
-+	on_each_cpu(dbci_portal, portal->addr.addr_ce, 1);
-+
- 	if (bm_rcr_init(portal, bm_rcr_pvb, bm_rcr_cce)) {
- 		pr_err("Bman RCR initialisation failed\n");
- 	return 1;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0041-net-ethernet-Rename-PHY_INTERFACE_MODE_SGMII_2500.patch b/target/linux/layerscape/patches-5.4/701-net-0041-net-ethernet-Rename-PHY_INTERFACE_MODE_SGMII_2500.patch
deleted file mode 100644
index 1dd0d9f43b..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0041-net-ethernet-Rename-PHY_INTERFACE_MODE_SGMII_2500.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 15096410c230acd29b2b1bf7958b71e1f990414a Mon Sep 17 00:00:00 2001
-From: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-Date: Wed, 29 Nov 2017 06:48:54 +0530
-Subject: [PATCH] net: ethernet: Rename PHY_INTERFACE_MODE_SGMII_2500
-
-Rename PHY_INTERFACE_MODE_SGMII_2500 to PHY_INTERFACE_MODE_2500SGMII
-Convention is to put the number(2500) first and then the
-interface mode(SGMII)
-
-Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/mac.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/mac.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac.c
-@@ -76,7 +76,7 @@ static const char phy_str[][11] = {
- 	[PHY_INTERFACE_MODE_RGMII_TXID]	= "rgmii-txid",
- 	[PHY_INTERFACE_MODE_RTBI]	= "rtbi",
- 	[PHY_INTERFACE_MODE_XGMII]	= "xgmii",
--	[PHY_INTERFACE_MODE_SGMII_2500] = "sgmii-2500",
-+	[PHY_INTERFACE_MODE_2500SGMII] = "sgmii-2500",
- };
- 
- static phy_interface_t __pure __attribute__((nonnull)) str2phy(const char *str)
-@@ -103,7 +103,7 @@ static const uint16_t phy2speed[] = {
- 	[PHY_INTERFACE_MODE_RGMII_TXID]	= SPEED_1000,
- 	[PHY_INTERFACE_MODE_RTBI]	= SPEED_1000,
- 	[PHY_INTERFACE_MODE_XGMII]	= SPEED_10000,
--	[PHY_INTERFACE_MODE_SGMII_2500] = SPEED_2500,
-+	[PHY_INTERFACE_MODE_2500SGMII] = SPEED_2500,
- };
- 
- static struct mac_device * __cold
diff --git a/target/linux/layerscape/patches-5.4/701-net-0042-sdk_dpaa-ceetm-add-independent-CEETM-congestion-thre.patch b/target/linux/layerscape/patches-5.4/701-net-0042-sdk_dpaa-ceetm-add-independent-CEETM-congestion-thre.patch
deleted file mode 100644
index 461280baf6..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0042-sdk_dpaa-ceetm-add-independent-CEETM-congestion-thre.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From aa54d82b06962bb620852ed20270f7783be68897 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Fri, 24 Nov 2017 10:29:12 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: add independent CEETM congestion thresholds
-
-Configure the CEETM egress congestion thresholds independently from the
-default Ethernet driver's Work Queues. Allow the user to edit the
-thresholds through menuconfig.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/Kconfig    | 23 ++++++++++++++++++++++
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c   |  4 ++--
- 2 files changed, 25 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/Kconfig
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/Kconfig
-@@ -20,6 +20,29 @@ config FSL_DPAA_CEETM
- 	help
- 	Enable QoS offloading support through the CEETM hardware block.
- 
-+config FSL_DPAA_CEETM_CCS_THRESHOLD_1G
-+	hex "CEETM egress congestion threshold on 1G ports"
-+	depends on FSL_DPAA_CEETM
-+	range 0x1000 0x10000000
-+	default "0x000a0000"
-+	help
-+	  The size in bytes of the CEETM egress Class Congestion State threshold on 1G ports.
-+	  The threshold needs to be configured keeping in mind the following factors:
-+	       - A threshold too large will buffer frames for a long time in the TX queues,
-+	       when a small shaping rate is configured. This will cause buffer pool depletion
-+	       or out of memory errors. This in turn will cause frame loss on RX;
-+	       - A threshold too small will cause unnecessary frame loss by entering
-+	       congestion too often.
-+
-+config FSL_DPAA_CEETM_CCS_THRESHOLD_10G
-+	hex "CEETM egress congestion threshold on 10G ports"
-+	depends on FSL_DPAA_CEETM
-+	range 0x1000 0x20000000
-+	default "0x00640000"
-+	help
-+	  The size in bytes of the CEETM egress Class Congestion State threshold on 10G ports.
-+	  See FSL_DPAA_CEETM_CCS_THRESHOLD_1G for details.
-+
- config FSL_DPAA_OFFLINE_PORTS
- 	bool "Offline Ports support"
- 	depends on FSL_SDK_DPAA_ETH
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -185,9 +185,9 @@ static int ceetm_config_ccg(struct qm_ce
- 
- 	/* Set the congestion state thresholds according to the link speed */
- 	if (dpa_priv->mac_dev->if_support & SUPPORTED_10000baseT_Full)
--		cs_th = CONFIG_FSL_DPAA_CS_THRESHOLD_10G;
-+		cs_th = CONFIG_FSL_DPAA_CEETM_CCS_THRESHOLD_10G;
- 	else
--		cs_th = CONFIG_FSL_DPAA_CS_THRESHOLD_1G;
-+		cs_th = CONFIG_FSL_DPAA_CEETM_CCS_THRESHOLD_1G;
- 
- 	qm_cgr_cs_thres_set64(&ccg_params.cs_thres_in, cs_th, 1);
- 	qm_cgr_cs_thres_set64(&ccg_params.cs_thres_out,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0043-sdk_dpaa-ceetm-stop-transmitting-frames-when-the-CQ-.patch b/target/linux/layerscape/patches-5.4/701-net-0043-sdk_dpaa-ceetm-stop-transmitting-frames-when-the-CQ-.patch
deleted file mode 100644
index 1f1afe329a..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0043-sdk_dpaa-ceetm-stop-transmitting-frames-when-the-CQ-.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 3aa939c73c176690a9ebe646612cd097f281efe5 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Fri, 24 Nov 2017 10:48:31 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: stop transmitting frames when the CQ is
- congested
-
-When the egress CQ is congested, drop the frames instead of enqueueing
-them. This is more efficient than enqueueing and receiving them back on
-the ERN queue.
-
-We also can't stop the netdev queues because that would affect all the CQs
-and would hinder prioritization.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c   | 22 ++++++++++++++++------
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h   |  1 +
- 2 files changed, 17 insertions(+), 6 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -125,16 +125,16 @@ static void ceetm_cscn(struct qm_ceetm_c
- 		break;
- 	}
- 
-+	ceetm_fq->congested = congested;
-+
- 	if (congested) {
- 		dpa_priv->cgr_data.congestion_start_jiffies = jiffies;
--		netif_tx_stop_all_queues(dpa_priv->net_dev);
- 		dpa_priv->cgr_data.cgr_congested_count++;
- 		if (cstats)
- 			cstats->congested_count++;
- 	} else {
- 		dpa_priv->cgr_data.congested_jiffies +=
- 			(jiffies - dpa_priv->cgr_data.congestion_start_jiffies);
--		netif_tx_wake_all_queues(dpa_priv->net_dev);
- 	}
- }
- 
-@@ -148,6 +148,7 @@ static int ceetm_alloc_fq(struct ceetm_f
- 
- 	(*fq)->net_dev = dev;
- 	(*fq)->ceetm_cls = cls;
-+	(*fq)->congested = 0;
- 	return 0;
- }
- 
-@@ -1913,7 +1914,8 @@ int __hot ceetm_tx(struct sk_buff *skb,
- 	struct Qdisc *sch = net_dev->qdisc;
- 	struct ceetm_class *cl;
- 	struct dpa_priv_s *priv_dpa;
--	struct qman_fq *egress_fq, *conf_fq;
-+	struct ceetm_fq *ceetm_fq;
-+	struct qman_fq *conf_fq;
- 	struct ceetm_qdisc *priv = qdisc_priv(sch);
- 	struct ceetm_qdisc_stats *qstats = this_cpu_ptr(priv->root.qstats);
- 	struct ceetm_class_stats *cstats;
-@@ -1945,11 +1947,11 @@ int __hot ceetm_tx(struct sk_buff *skb,
- 	 */
- 	switch (cl->type) {
- 	case CEETM_PRIO:
--		egress_fq = &cl->prio.fq->fq;
-+		ceetm_fq = cl->prio.fq;
- 		cstats = this_cpu_ptr(cl->prio.cstats);
- 		break;
- 	case CEETM_WBFS:
--		egress_fq = &cl->wbfs.fq->fq;
-+		ceetm_fq = cl->wbfs.fq;
- 		cstats = this_cpu_ptr(cl->wbfs.cstats);
- 		break;
- 	default:
-@@ -1957,8 +1959,16 @@ int __hot ceetm_tx(struct sk_buff *skb,
- 		goto drop;
- 	}
- 
-+	/* If the FQ is congested, avoid enqueuing the frame and dropping it
-+	 * when it returns on the ERN path. Drop it here directly instead.
-+	 */
-+	if (unlikely(ceetm_fq->congested)) {
-+		qstats->drops++;
-+		goto drop;
-+	}
-+
- 	bstats_update(&cstats->bstats, skb);
--	return dpa_tx_extended(skb, net_dev, egress_fq, conf_fq);
-+	return dpa_tx_extended(skb, net_dev, &ceetm_fq->fq, conf_fq);
- 
- drop:
- 	dev_kfree_skb_any(skb);
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h
-@@ -105,6 +105,7 @@ struct ceetm_fq {
- 	struct qman_fq fq;
- 	struct net_device *net_dev;
- 	struct ceetm_class *ceetm_cls;
-+	int congested; /* Congestion status */
- };
- 
- struct root_q {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0044-sdk_dpaa-ceetm-coding-style-fixes-and-added-comments.patch b/target/linux/layerscape/patches-5.4/701-net-0044-sdk_dpaa-ceetm-coding-style-fixes-and-added-comments.patch
deleted file mode 100644
index 982344d86e..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0044-sdk_dpaa-ceetm-coding-style-fixes-and-added-comments.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From e21cd0d3ef6f039c674b9e22581aaaabdf3a40f7 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Fri, 24 Nov 2017 11:55:51 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: coding style fixes and added comments
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c   | 38 ++++++++++++++--------
- 1 file changed, 24 insertions(+), 14 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -69,15 +69,17 @@ static void get_dcp_and_sp(struct net_de
- static void ceetm_ern(struct qman_portal *portal, struct qman_fq *fq,
- 		      const struct qm_mr_entry *msg)
- {
--	struct net_device *net_dev;
--	struct ceetm_class *cls;
-+	struct dpa_percpu_priv_s *dpa_percpu_priv;
- 	struct ceetm_class_stats *cstats = NULL;
- 	const struct dpa_priv_s *dpa_priv;
--	struct dpa_percpu_priv_s *dpa_percpu_priv;
--	struct sk_buff *skb;
- 	struct qm_fd fd = msg->ern.fd;
-+	struct net_device *net_dev;
-+	struct ceetm_fq *ceetm_fq;
-+	struct ceetm_class *cls;
-+	struct sk_buff *skb;
- 
--	net_dev = ((struct ceetm_fq *)fq)->net_dev;
-+	ceetm_fq = container_of(fq, struct ceetm_fq, fq);
-+	net_dev = ceetm_fq->net_dev;
- 	dpa_priv = netdev_priv(net_dev);
- 	dpa_percpu_priv = raw_cpu_ptr(dpa_priv->percpu_priv);
- 
-@@ -86,7 +88,7 @@ static void ceetm_ern(struct qman_portal
- 	dpa_percpu_priv->stats.tx_fifo_errors++;
- 
- 	/* Increment CEETM counters */
--	cls = ((struct ceetm_fq *)fq)->ceetm_cls;
-+	cls = ceetm_fq->ceetm_cls;
- 	switch (cls->type) {
- 	case CEETM_PRIO:
- 		cstats = this_cpu_ptr(cls->prio.cstats);
-@@ -99,11 +101,15 @@ static void ceetm_ern(struct qman_portal
- 	if (cstats)
- 		cstats->ern_drop_count++;
- 
-+	/* Release the buffers that were supposed to be recycled. */
- 	if (fd.bpid != 0xff) {
- 		dpa_fd_release(net_dev, &fd);
- 		return;
- 	}
- 
-+	/* Release the frames that were supposed to return on the
-+	 * confirmation path.
-+	 */
- 	skb = _dpa_cleanup_tx_fd(dpa_priv, &fd);
- 	dev_kfree_skb_any(skb);
- }
-@@ -1909,18 +1915,22 @@ static struct ceetm_class *ceetm_classif
- 
- int __hot ceetm_tx(struct sk_buff *skb, struct net_device *net_dev)
- {
--	int ret;
--	bool act_drop = false;
-+	const int queue_mapping = dpa_get_queue_mapping(skb);
- 	struct Qdisc *sch = net_dev->qdisc;
--	struct ceetm_class *cl;
-+	struct ceetm_class_stats *cstats;
-+	struct ceetm_qdisc_stats *qstats;
- 	struct dpa_priv_s *priv_dpa;
- 	struct ceetm_fq *ceetm_fq;
-+	struct ceetm_qdisc *priv;
- 	struct qman_fq *conf_fq;
--	struct ceetm_qdisc *priv = qdisc_priv(sch);
--	struct ceetm_qdisc_stats *qstats = this_cpu_ptr(priv->root.qstats);
--	struct ceetm_class_stats *cstats;
--	const int queue_mapping = dpa_get_queue_mapping(skb);
--	spinlock_t *root_lock = qdisc_lock(sch);
-+	struct ceetm_class *cl;
-+	spinlock_t *root_lock;
-+	bool act_drop = false;
-+	int ret;
-+
-+	root_lock = qdisc_lock(sch);
-+	priv = qdisc_priv(sch);
-+	qstats = this_cpu_ptr(priv->root.qstats);
- 
- 	spin_lock(root_lock);
- 	cl = ceetm_classify(skb, sch, &ret, &act_drop);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0045-sdk_dpaa-ceetm-increment-the-interface-s-ern-counter.patch b/target/linux/layerscape/patches-5.4/701-net-0045-sdk_dpaa-ceetm-increment-the-interface-s-ern-counter.patch
deleted file mode 100644
index f15e529a52..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0045-sdk_dpaa-ceetm-increment-the-interface-s-ern-counter.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 0f57c89199c5664a14e9a4c88a382d642e9398a1 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Thu, 7 Dec 2017 17:49:34 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: increment the interface's ern counters when
- needed
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -86,6 +86,7 @@ static void ceetm_ern(struct qman_portal
- 	/* Increment DPA counters */
- 	dpa_percpu_priv->stats.tx_dropped++;
- 	dpa_percpu_priv->stats.tx_fifo_errors++;
-+	count_ern(dpa_percpu_priv, msg);
- 
- 	/* Increment CEETM counters */
- 	cls = ceetm_fq->ceetm_cls;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0046-sdk_dpaa-update-buffer-recycling-conditions.patch b/target/linux/layerscape/patches-5.4/701-net-0046-sdk_dpaa-update-buffer-recycling-conditions.patch
deleted file mode 100644
index daad07483c..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0046-sdk_dpaa-update-buffer-recycling-conditions.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From b95f457bb7ba38f03a71b474e35f53670322f0db Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 15 Jan 2018 17:41:01 +0200
-Subject: [PATCH] sdk_dpaa: update buffer recycling conditions
-
-Guarantee there is enough space inside the skb's headroom to store the
-skb back-pointer before recycling the buffer. The back-pointer is stored
-right before the buffer's start.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -350,7 +350,13 @@ bool dpa_buf_is_recyclable(struct sk_buf
- 	/* left align to the nearest cacheline */
- 	new = (unsigned char *)((unsigned long)new & ~(SMP_CACHE_BYTES - 1));
- 
--	if (likely(new >= skb->head &&
-+	/* Make sure there is enough space to store the skb back-pointer in
-+	 * the headroom, right before the start of the buffer.
-+	 *
-+	 * Guarantee that both maximum size and maximum data offsets aren't
-+	 * crossed.
-+	 */
-+	if (likely(new >= (skb->head + sizeof(void *)) &&
- 		   new >= (skb->data - DPA_MAX_FD_OFFSET) &&
- 		   skb_end_pointer(skb) - new <= DPA_RECYCLE_MAX_SIZE)) {
- 		*new_buf_start = new;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0047-sdk_dpaa-update-comments-about-recycling-and-back-po.patch b/target/linux/layerscape/patches-5.4/701-net-0047-sdk_dpaa-update-comments-about-recycling-and-back-po.patch
deleted file mode 100644
index a54dce9f28..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0047-sdk_dpaa-update-comments-about-recycling-and-back-po.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 2d7b6e7daf076b63f461ce9c4ec6022ddc3d15bb Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 15 Jan 2018 17:42:42 +0200
-Subject: [PATCH] sdk_dpaa: update comments about recycling and back-pointer
- storage
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 18 ++++++++++++++++--
- 1 file changed, 16 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -121,6 +121,10 @@ static int _dpa_bp_add_8_bufs(const stru
- 			put_page(virt_to_head_page(new_buf));
- 			goto build_skb_failed;
- 		}
-+
-+		/* Store the skb back-pointer before the start of the buffer.
-+		 * Otherwise it will be overwritten by the FMan.
-+		 */
- 		DPA_WRITE_SKB_PTR(skb, skbh, new_buf, -1);
- 
- 		addr = dma_map_single(dev, new_buf,
-@@ -344,7 +348,10 @@ bool dpa_buf_is_recyclable(struct sk_buf
- 	 * - buffer address aligned to cacheline bytes
- 	 * - offset of data from start of buffer no lower than a minimum value
- 	 * - offset of data from start of buffer no higher than a maximum value
-+	 * - the skb back-pointer is stored safely
- 	 */
-+
-+	/* guarantee both the minimum size and the minimum data offset */
- 	new = min(skb_end_pointer(skb) - min_size, skb->data - min_offset);
- 
- 	/* left align to the nearest cacheline */
-@@ -694,6 +701,9 @@ int __hot skb_to_contig_fd(struct dpa_pr
- 		dma_dir = DMA_BIDIRECTIONAL;
- 		dma_map_size = dpa_bp->size;
- 
-+		/* Store the skb back-pointer before the start of the buffer.
-+		 * Otherwise it will be overwritten by the FMan.
-+		 */
- 		DPA_WRITE_SKB_PTR(skb, skbh, buffer_start, -1);
- 		*offset = skb_headroom(skb) - fd->offset;
- 	} else
-@@ -711,7 +721,7 @@ int __hot skb_to_contig_fd(struct dpa_pr
- 
- 		/* The buffer will be Tx-confirmed, but the TxConf cb must
- 		 * necessarily look at our Tx private data to retrieve the
--		 * skbuff. (In short: can't use DPA_WRITE_SKB_PTR() here.)
-+		 * skbuff. Store the back-pointer inside the buffer.
- 		 */
- 		DPA_WRITE_SKB_PTR(skb, skbh, buffer_start, 0);
- 	}
-@@ -975,7 +985,11 @@ int __hot skb_to_sg_fd(struct dpa_priv_s
- 	fd->length20 = skb->len;
- 	fd->offset = priv->tx_headroom;
- 
--	/* DMA map the SGT page */
-+	/* DMA map the SGT page
-+	 *
-+	 * It's safe to store the skb back-pointer inside the buffer since
-+	 * S/G frames are non-recyclable.
-+	 */
- 	DPA_WRITE_SKB_PTR(skb, skbh, sgt_buf, 0);
- 	addr = dma_map_single(dpa_bp->dev, sgt_buf,
- 			      priv->tx_headroom + sgt_size,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0048-sdk_dpaa-ceetm-pass-extended-ACK-struct-to-parsing-f.patch b/target/linux/layerscape/patches-5.4/701-net-0048-sdk_dpaa-ceetm-pass-extended-ACK-struct-to-parsing-f.patch
deleted file mode 100644
index d0c12a4391..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0048-sdk_dpaa-ceetm-pass-extended-ACK-struct-to-parsing-f.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 62fedbc6ed6f4117168af52a7ff12e3450809d30 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 17 Jan 2018 16:31:57 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: pass extended ACK struct to parsing
- functions
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -1053,7 +1053,7 @@ static int ceetm_init(struct Qdisc *sch,
- 		return -EINVAL;
- 	}
- 
--	ret = nla_parse_nested(tb, TCA_CEETM_QOPS, opt, ceetm_policy);
-+	ret = nla_parse_nested(tb, TCA_CEETM_QOPS, opt, ceetm_policy, NULL);
- 	if (ret < 0) {
- 		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
- 		return ret;
-@@ -1230,7 +1230,7 @@ static int ceetm_change(struct Qdisc *sc
- 
- 	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
- 
--	ret = nla_parse_nested(tb, TCA_CEETM_QOPS, opt, ceetm_policy);
-+	ret = nla_parse_nested(tb, TCA_CEETM_QOPS, opt, ceetm_policy, NULL);
- 	if (ret < 0) {
- 		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
- 		return ret;
-@@ -1463,7 +1463,7 @@ static int ceetm_cls_change(struct Qdisc
- 		return -EINVAL;
- 	}
- 
--	err = nla_parse_nested(tb, TCA_CEETM_COPT, opt, ceetm_policy);
-+	err = nla_parse_nested(tb, TCA_CEETM_COPT, opt, ceetm_policy, NULL);
- 	if (err < 0) {
- 		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
- 		return -EINVAL;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0049-sdk_dpaa-ceetm-adapt-to-new-tcf-classify-API.patch b/target/linux/layerscape/patches-5.4/701-net-0049-sdk_dpaa-ceetm-adapt-to-new-tcf-classify-API.patch
deleted file mode 100644
index 454cfe3f20..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0049-sdk_dpaa-ceetm-adapt-to-new-tcf-classify-API.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 9befbfedde09b0e3abdc56d8f98e2111af39e872 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 17 Jan 2018 16:36:05 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: adapt to new tcf classify API
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -1848,7 +1848,7 @@ static struct ceetm_class *ceetm_classif
- 
- 	*qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
- 	tcf = priv->filter_list;
--	while (tcf && (result = tc_classify(skb, tcf, &res, false)) >= 0) {
-+	while (tcf && (result = tcf_classify(skb, tcf, &res, false)) >= 0) {
- #ifdef CONFIG_NET_CLS_ACT
- 		switch (result) {
- 		case TC_ACT_QUEUED:
diff --git a/target/linux/layerscape/patches-5.4/701-net-0050-sdk_dpaa-ceetm-introduce-a-TRAP-control-action.patch b/target/linux/layerscape/patches-5.4/701-net-0050-sdk_dpaa-ceetm-introduce-a-TRAP-control-action.patch
deleted file mode 100644
index 4b3122113a..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0050-sdk_dpaa-ceetm-introduce-a-TRAP-control-action.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From e71adc0bb320c602791fa08a14626704a57bbb4d Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 17 Jan 2018 16:38:09 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: introduce a TRAP control action
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -1853,6 +1853,7 @@ static struct ceetm_class *ceetm_classif
- 		switch (result) {
- 		case TC_ACT_QUEUED:
- 		case TC_ACT_STOLEN:
-+		case TC_ACT_TRAP:
- 			*qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
- 		case TC_ACT_SHOT:
- 			/* No valid class found due to action */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0051-sdk_dpaa-ceetm-use-the-tcf-block-infrastructure.patch b/target/linux/layerscape/patches-5.4/701-net-0051-sdk_dpaa-ceetm-use-the-tcf-block-infrastructure.patch
deleted file mode 100644
index 0e3d0166bf..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0051-sdk_dpaa-ceetm-use-the-tcf-block-infrastructure.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From ae72322610af7eb13fc9a67567fdac610d3d3d3d Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 17 Jan 2018 16:44:19 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: use the tcf block infrastructure
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c   | 31 +++++++++++++++-------
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h   |  2 ++
- 2 files changed, 24 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -423,7 +423,7 @@ static void ceetm_cls_destroy(struct Qdi
- 			free_percpu(cl->wbfs.cstats);
- 	}
- 
--	tcf_destroy_chain(&cl->filter_list);
-+	tcf_block_put(cl->block);
- 	kfree(cl);
- }
- 
-@@ -440,11 +440,13 @@ static void ceetm_destroy(struct Qdisc *
- 		 __func__, sch->handle);
- 
- 	/* All filters need to be removed before destroying the classes */
--	tcf_destroy_chain(&priv->filter_list);
-+	tcf_block_put(priv->block);
- 
- 	for (i = 0; i < priv->clhash.hashsize; i++) {
--		hlist_for_each_entry(cl, &priv->clhash.hash[i], common.hnode)
--			tcf_destroy_chain(&cl->filter_list);
-+		hlist_for_each_entry(cl, &priv->clhash.hash[i], common.hnode) {
-+			tcf_block_put(cl->block);
-+			cl->block = NULL;
-+		}
- 	}
- 
- 	for (i = 0; i < priv->clhash.hashsize; i++) {
-@@ -594,7 +596,7 @@ static int ceetm_init_root(struct Qdisc
- 	/* Validate inputs */
- 	if (sch->parent != TC_H_ROOT) {
- 		pr_err("CEETM: a root ceetm qdisc can not be attached to a class\n");
--		tcf_destroy_chain(&priv->filter_list);
-+		tcf_block_put(priv->block);
- 		qdisc_class_hash_destroy(&priv->clhash);
- 		return -EINVAL;
- 	}
-@@ -1053,6 +1055,10 @@ static int ceetm_init(struct Qdisc *sch,
- 		return -EINVAL;
- 	}
- 
-+	ret = tcf_block_get(&priv->block, &priv->filter_list);
-+	if (ret)
-+		return ret;
-+
- 	ret = nla_parse_nested(tb, TCA_CEETM_QOPS, opt, ceetm_policy, NULL);
- 	if (ret < 0) {
- 		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
-@@ -1521,6 +1527,12 @@ static int ceetm_cls_change(struct Qdisc
- 	if (!cl)
- 		return -ENOMEM;
- 
-+	err = tcf_block_get(&cl->block, &cl->filter_list);
-+	if (err) {
-+		kfree(cl);
-+		return err;
-+	}
-+
- 	cl->type = copt->type;
- 	cl->shaped = copt->shaped;
- 	cl->root.rate = copt->rate;
-@@ -1585,6 +1597,7 @@ channel_err:
- 		pr_err(KBUILD_BASENAME " : %s : failed to release the channel %d\n",
- 		       __func__, channel->idx);
- claim_err:
-+	tcf_block_put(cl->block);
- 	kfree(cl);
- 	return err;
- }
-@@ -1779,15 +1792,15 @@ static int ceetm_cls_dump_stats(struct Q
- 	return gnet_stats_copy_app(d, &xstats, sizeof(xstats));
- }
- 
--static struct tcf_proto **ceetm_tcf_chain(struct Qdisc *sch, unsigned long arg)
-+static struct tcf_block *ceetm_tcf_block(struct Qdisc *sch, unsigned long arg)
- {
- 	struct ceetm_qdisc *priv = qdisc_priv(sch);
- 	struct ceetm_class *cl = (struct ceetm_class *)arg;
--	struct tcf_proto **fl = cl ? &cl->filter_list : &priv->filter_list;
-+	struct tcf_block *block = cl ? cl->block : priv->block;
- 
- 	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n", __func__,
- 		 cl ? cl->common.classid : 0, sch->handle);
--	return fl;
-+	return block;
- }
- 
- static unsigned long ceetm_tcf_bind(struct Qdisc *sch, unsigned long parent,
-@@ -1816,7 +1829,7 @@ const struct Qdisc_class_ops ceetm_cls_o
- 	.change		=	ceetm_cls_change,
- 	.delete		=	ceetm_cls_delete,
- 	.walk		=	ceetm_cls_walk,
--	.tcf_chain	=	ceetm_tcf_chain,
-+	.tcf_block	=	ceetm_tcf_block,
- 	.bind_tcf	=	ceetm_tcf_bind,
- 	.unbind_tcf	=	ceetm_tcf_unbind,
- 	.dump		=	ceetm_cls_dump,
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h
-@@ -141,6 +141,7 @@ struct ceetm_qdisc {
- 	};
- 	struct Qdisc_class_hash clhash;
- 	struct tcf_proto *filter_list; /* qdisc attached filters */
-+	struct tcf_block *block;
- };
- 
- /* CEETM Qdisc configuration parameters */
-@@ -192,6 +193,7 @@ struct ceetm_class {
- 	struct Qdisc_class_common common;
- 	int refcnt; /* usage count of this class */
- 	struct tcf_proto *filter_list; /* class attached filters */
-+	struct tcf_block *block;
- 	struct Qdisc *parent;
- 	bool shaped;
- 	int type; /* ROOT/PRIO/WBFS */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0052-sdk_dpaa-ceetm-remove-tc-class-reference-counting.patch b/target/linux/layerscape/patches-5.4/701-net-0052-sdk_dpaa-ceetm-remove-tc-class-reference-counting.patch
deleted file mode 100644
index 473720b41f..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0052-sdk_dpaa-ceetm-remove-tc-class-reference-counting.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From 024d664114310fe103c2c31f2253bed58238951d Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 17 Jan 2018 16:47:07 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: remove tc class reference counting
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c   | 38 +++-------------------
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h   |  1 -
- 2 files changed, 4 insertions(+), 35 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -774,7 +774,6 @@ static int ceetm_init_prio(struct Qdisc
- 		}
- 
- 		child_cl->common.classid = TC_H_MAKE(sch->handle, (i + 1));
--		child_cl->refcnt = 1;
- 		child_cl->parent = sch;
- 		child_cl->type = CEETM_PRIO;
- 		child_cl->shaped = priv->shaped;
-@@ -986,7 +985,6 @@ static int ceetm_init_wbfs(struct Qdisc
- 		}
- 
- 		child_cl->common.classid = TC_H_MAKE(sch->handle, (i + 1));
--		child_cl->refcnt = 1;
- 		child_cl->parent = sch;
- 		child_cl->type = CEETM_WBFS;
- 		child_cl->shaped = priv->shaped;
-@@ -1297,29 +1295,9 @@ static void ceetm_attach(struct Qdisc *s
- 	}
- }
- 
--static unsigned long ceetm_cls_get(struct Qdisc *sch, u32 classid)
-+static unsigned long ceetm_cls_search(struct Qdisc *sch, u32 handle)
- {
--	struct ceetm_class *cl;
--
--	pr_debug(KBUILD_BASENAME " : %s : classid %X from qdisc %X\n",
--		 __func__, classid, sch->handle);
--	cl = ceetm_find(classid, sch);
--
--	if (cl)
--		cl->refcnt++; /* Will decrement in put() */
--	return (unsigned long)cl;
--}
--
--static void ceetm_cls_put(struct Qdisc *sch, unsigned long arg)
--{
--	struct ceetm_class *cl = (struct ceetm_class *)arg;
--
--	pr_debug(KBUILD_BASENAME " : %s : classid %X from qdisc %X\n",
--		 __func__, cl->common.classid, sch->handle);
--	cl->refcnt--;
--
--	if (cl->refcnt == 0)
--		ceetm_cls_destroy(sch, cl);
-+	return (unsigned long)ceetm_find(handle, sch);
- }
- 
- static int ceetm_cls_change_root(struct ceetm_class *cl,
-@@ -1540,7 +1518,6 @@ static int ceetm_cls_change(struct Qdisc
- 	cl->root.tbl = copt->tbl;
- 
- 	cl->common.classid = classid;
--	cl->refcnt = 1;
- 	cl->parent = sch;
- 	cl->root.child = NULL;
- 	cl->root.wbfs_grp_a = false;
-@@ -1696,15 +1673,9 @@ static int ceetm_cls_delete(struct Qdisc
- 
- 	sch_tree_lock(sch);
- 	qdisc_class_hash_remove(&priv->clhash, &cl->common);
--	cl->refcnt--;
--
--	/* The refcnt should be at least 1 since we have incremented it in
--	 * get(). Will decrement again in put() where we will call destroy()
--	 * to actually free the memory if it reaches 0.
--	 */
--	WARN_ON(cl->refcnt == 0);
- 
- 	sch_tree_unlock(sch);
-+	ceetm_cls_destroy(sch, cl);
- 	return 0;
- }
- 
-@@ -1824,8 +1795,7 @@ static void ceetm_tcf_unbind(struct Qdis
- const struct Qdisc_class_ops ceetm_cls_ops = {
- 	.graft		=	ceetm_cls_graft,
- 	.leaf		=	ceetm_cls_leaf,
--	.get		=	ceetm_cls_get,
--	.put		=	ceetm_cls_put,
-+	.find		=	ceetm_cls_search,
- 	.change		=	ceetm_cls_change,
- 	.delete		=	ceetm_cls_delete,
- 	.walk		=	ceetm_cls_walk,
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h
-@@ -191,7 +191,6 @@ struct wbfs_c {
- 
- struct ceetm_class {
- 	struct Qdisc_class_common common;
--	int refcnt; /* usage count of this class */
- 	struct tcf_proto *filter_list; /* class attached filters */
- 	struct tcf_block *block;
- 	struct Qdisc *parent;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0053-sdk_dpaa-ceetm-store-Qdisc-pointer-in-struct-block.patch b/target/linux/layerscape/patches-5.4/701-net-0053-sdk_dpaa-ceetm-store-Qdisc-pointer-in-struct-block.patch
deleted file mode 100644
index 7c826cf2b9..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0053-sdk_dpaa-ceetm-store-Qdisc-pointer-in-struct-block.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From c041c49fc99382976c916438994c3a1caf4ab066 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 17 Jan 2018 17:10:29 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: store Qdisc pointer in struct block
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -1053,7 +1053,7 @@ static int ceetm_init(struct Qdisc *sch,
- 		return -EINVAL;
- 	}
- 
--	ret = tcf_block_get(&priv->block, &priv->filter_list);
-+	ret = tcf_block_get(&priv->block, &priv->filter_list, sch);
- 	if (ret)
- 		return ret;
- 
-@@ -1505,7 +1505,7 @@ static int ceetm_cls_change(struct Qdisc
- 	if (!cl)
- 		return -ENOMEM;
- 
--	err = tcf_block_get(&cl->block, &cl->filter_list);
-+	err = tcf_block_get(&cl->block, &cl->filter_list, sch);
- 	if (err) {
- 		kfree(cl);
- 		return err;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0054-dpaa_eth-workaround-for-ERR010022.patch b/target/linux/layerscape/patches-5.4/701-net-0054-dpaa_eth-workaround-for-ERR010022.patch
deleted file mode 100644
index 3c66e5a5f5..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0054-dpaa_eth-workaround-for-ERR010022.patch
+++ /dev/null
@@ -1,299 +0,0 @@
-From fced03d891377fa04153fb0538bc8ca95ba05020 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Tue, 14 Nov 2017 08:12:12 +0200
-Subject: [PATCH] dpaa_eth: workaround for ERR010022
-
-On LS1043A SoC there is a known erratum ERR010022 that results in split DMA
-transfers in the FMan under certain conditions. This, combined with a fixed
-size FIFO of ongoing DMA transfers that may overflow when a split occurs,
-results in the FMan stalling DMA transfers under high traffic. To avoid the
-problem, one needs to prevent the DMA transfer splits to occur by preparing
-the buffers as follows.
-
-In order to prevent split transactions, all frames need to be aligned to 16
-bytes and not cross 4K address boundaries. To allow Jumbo frames (up to
-9.6K), all data must be aligned to 256 byes. This way, 4K boundary crossings
-will not trigger any transaction splits.
-
-The errata is prevented from manifesting by realigning all outgoing frames to
-256 byte boundaries. In the process, all S/G frames are linearized.
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 204 +++++++++++++++++++++++--
- 1 file changed, 194 insertions(+), 10 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-@@ -54,6 +54,10 @@
- #include <linux/phy_fixed.h>
- #include <soc/fsl/bman.h>
- #include <soc/fsl/qman.h>
-+#if !defined(CONFIG_PPC) && defined(CONFIG_SOC_BUS)
-+#include <linux/sys_soc.h>      /* soc_device_match */
-+#endif
-+
- #include "fman.h"
- #include "fman_port.h"
- #include "mac.h"
-@@ -73,6 +77,10 @@ static u16 tx_timeout = 1000;
- module_param(tx_timeout, ushort, 0444);
- MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms");
- 
-+#ifndef CONFIG_PPC
-+bool dpaa_errata_a010022;
-+#endif
-+
- #define FM_FD_STAT_RX_ERRORS						\
- 	(FM_FD_ERR_DMA | FM_FD_ERR_PHYSICAL	| \
- 	 FM_FD_ERR_SIZE | FM_FD_ERR_CLS_DISCARD | \
-@@ -1495,7 +1503,19 @@ static int dpaa_bp_add_8_bufs(const stru
- 	u8 i;
- 
- 	for (i = 0; i < 8; i++) {
-+#ifndef CONFIG_PPC
-+		if (dpaa_errata_a010022) {
-+			struct page *page = alloc_page(GFP_KERNEL);
-+
-+			if (unlikely(!page))
-+				goto release_previous_buffs;
-+			new_buf = page_address(page);
-+		} else {
-+			new_buf = netdev_alloc_frag(dpaa_bp->raw_size);
-+		}
-+#else
- 		new_buf = netdev_alloc_frag(dpaa_bp->raw_size);
-+#endif
- 		if (unlikely(!new_buf)) {
- 			dev_err(dev, "netdev_alloc_frag() failed, size %zu\n",
- 				dpaa_bp->raw_size);
-@@ -1663,9 +1683,15 @@ static struct sk_buff *dpaa_cleanup_tx_f
- 		}
- 	}
- 
--	if (qm_fd_get_format(fd) == qm_fd_sg)
--		/* Free the page frag that we allocated on Tx */
--		skb_free_frag(phys_to_virt(addr));
-+	if (qm_fd_get_format(fd) == qm_fd_sg) {
-+#ifndef CONFIG_PPC
-+		if (dpaa_errata_a010022)
-+			put_page(virt_to_page(sgt));
-+		else
-+#endif
-+			/* Free the page frag that we allocated on Tx */
-+			skb_free_frag(phys_to_virt(addr));
-+	}
- 
- 	return skb;
- }
-@@ -1922,14 +1948,26 @@ static int skb_to_sg_fd(struct dpaa_priv
- 	size_t frag_len;
- 	void *sgt_buf;
- 
--	/* get a page frag to store the SGTable */
--	sz = SKB_DATA_ALIGN(priv->tx_headroom + DPAA_SGT_SIZE);
--	sgt_buf = netdev_alloc_frag(sz);
--	if (unlikely(!sgt_buf)) {
--		netdev_err(net_dev, "netdev_alloc_frag() failed for size %d\n",
--			   sz);
--		return -ENOMEM;
-+#ifndef CONFIG_PPC
-+	if (unlikely(dpaa_errata_a010022)) {
-+		struct page *page = alloc_page(GFP_ATOMIC);
-+		if (unlikely(!page))
-+			return -ENOMEM;
-+		sgt_buf = page_address(page);
-+	} else {
-+#endif
-+		/* get a page frag to store the SGTable */
-+		sz = SKB_DATA_ALIGN(priv->tx_headroom + DPAA_SGT_SIZE);
-+		sgt_buf = netdev_alloc_frag(sz);
-+		if (unlikely(!sgt_buf)) {
-+			netdev_err(net_dev,
-+				   "netdev_alloc_frag() failed for size %d\n",
-+				   sz);
-+			return -ENOMEM;
-+		}
-+#ifndef CONFIG_PPC
- 	}
-+#endif
- 
- 	/* Enable L3/L4 hardware checksum computation.
- 	 *
-@@ -2049,6 +2087,122 @@ static inline int dpaa_xmit(struct dpaa_
- 	return 0;
- }
- 
-+#ifndef CONFIG_PPC
-+/* On LS1043A SoC there is a known erratum ERR010022 that results in split DMA
-+ * transfers in the FMan under certain conditions. This, combined with a fixed
-+ * size FIFO of ongoing DMA transfers that may overflow when a split occurs,
-+ * results in the FMan stalling DMA transfers under high traffic. To avoid the
-+ * problem, one needs to prevent the DMA transfer splits to occur by preparing
-+ * the buffers
-+ */
-+
-+#define DPAA_A010022_HEADROOM	256
-+#define CROSS_4K_BOUND(start, size) \
-+	(((start) + (size)) > (((start) + 0x1000) & ~0xFFF))
-+
-+static bool dpaa_errata_a010022_has_dma_issue(struct sk_buff *skb,
-+					      struct dpaa_priv *priv)
-+{
-+	int nr_frags, i = 0;
-+	 skb_frag_t *frag;
-+
-+	/* Transfers that do not start at 16B aligned addresses will be split;
-+	 * Transfers that cross a 4K page boundary will also be split
-+	 */
-+
-+	/* Check if the frame data is aligned to 16 bytes */
-+	if ((uintptr_t)skb->data % DPAA_FD_DATA_ALIGNMENT)
-+		return true;
-+
-+	/* Check if the headroom crosses a boundary */
-+	if (CROSS_4K_BOUND((uintptr_t)skb->head, skb_headroom(skb)))
-+		return true;
-+
-+	/* Check if the non-paged data crosses a boundary */
-+	if (CROSS_4K_BOUND((uintptr_t)skb->data, skb_headlen(skb)))
-+		return true;
-+
-+	nr_frags = skb_shinfo(skb)->nr_frags;
-+
-+	while (i < nr_frags) {
-+		frag = &skb_shinfo(skb)->frags[i];
-+
-+		/* Check if a paged fragment crosses a boundary from its
-+		 * offset to its end.
-+		 */
-+		if (CROSS_4K_BOUND((uintptr_t)frag->page_offset, frag->size))
-+			return true;
-+
-+		i++;
-+	}
-+
-+	return false;
-+}
-+
-+static struct sk_buff *dpaa_errata_a010022_prevent(struct sk_buff *skb,
-+						   struct dpaa_priv *priv)
-+{
-+	int trans_offset = skb_transport_offset(skb);
-+	int net_offset = skb_network_offset(skb);
-+	int nsize, npage_order, headroom;
-+	struct sk_buff *nskb = NULL;
-+	struct page *npage;
-+	void *npage_addr;
-+
-+	if (!dpaa_errata_a010022_has_dma_issue(skb, priv))
-+		return skb;
-+
-+	/* For the new skb we only need the old one's data (both non-paged and
-+	 * paged). We can skip the old tailroom.
-+	 *
-+	 * The headroom also needs to fit our private info (64 bytes) but we
-+	 * reserve 256 bytes instead in order to guarantee that the data is
-+	 * aligned to 256.
-+	 */
-+	headroom = DPAA_A010022_HEADROOM;
-+	nsize = headroom + skb->len +
-+		SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
-+
-+	/* Reserve enough memory to accommodate Jumbo frames */
-+	npage_order = (nsize - 1) / PAGE_SIZE;
-+	npage = alloc_pages(GFP_ATOMIC | __GFP_COMP, npage_order);
-+	if (unlikely(!npage)) {
-+		WARN_ONCE(1, "Memory allocation failure\n");
-+		return NULL;
-+	}
-+	npage_addr = page_address(npage);
-+
-+	nskb = build_skb(npage_addr, nsize);
-+	if (unlikely(!nskb))
-+		goto err;
-+
-+	/* Code borrowed and adapted from skb_copy() */
-+	skb_reserve(nskb, headroom);
-+	skb_put(nskb, skb->len);
-+	if (skb_copy_bits(skb, 0, nskb->data, skb->len)) {
-+		WARN_ONCE(1, "skb parsing failure\n");
-+		goto err;
-+	}
-+	copy_skb_header(nskb, skb);
-+
-+	/* We move the headroom when we align it so we have to reset the
-+	 * network and transport header offsets relative to the new data
-+	 * pointer. The checksum offload relies on these offsets.
-+	 */
-+	skb_set_network_header(nskb, net_offset);
-+	skb_set_transport_header(nskb, trans_offset);
-+
-+	dev_kfree_skb(skb);
-+	return nskb;
-+
-+err:
-+	if (nskb)
-+		dev_kfree_skb(nskb);
-+	put_page(npage);
-+	return NULL;
-+}
-+#endif
-+
- static netdev_tx_t
- dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
- {
-@@ -2095,6 +2249,15 @@ dpaa_start_xmit(struct sk_buff *skb, str
- 		nonlinear = skb_is_nonlinear(skb);
- 	}
- 
-+#ifndef CONFIG_PPC
-+	if (unlikely(dpaa_errata_a010022)) {
-+		skb = dpaa_errata_a010022_prevent(skb, priv);
-+		if (!skb)
-+			goto enomem;
-+		nonlinear = skb_is_nonlinear(skb);
-+	}
-+#endif
-+
- 	if (nonlinear) {
- 		/* Just create a S/G fd based on the skb */
- 		err = skb_to_sg_fd(priv, skb, &fd);
-@@ -2992,6 +3155,23 @@ static int dpaa_remove(struct platform_d
- 	return err;
- }
- 
-+#ifndef CONFIG_PPC
-+static bool __init soc_has_errata_a010022(void)
-+{
-+#ifdef CONFIG_SOC_BUS
-+	const struct soc_device_attribute soc_msi_matches[] = {
-+		{ .family = "QorIQ LS1043A",
-+		  .data = NULL },
-+		{ },
-+	};
-+
-+	if (!soc_device_match(soc_msi_matches))
-+		return false;
-+#endif
-+	return true; /* cannot identify SoC or errata applies */
-+}
-+#endif
-+
- static const struct platform_device_id dpaa_devtype[] = {
- 	{
- 		.name = "dpaa-ethernet",
-@@ -3016,6 +3196,10 @@ static int __init dpaa_load(void)
- 
- 	pr_debug("FSL DPAA Ethernet driver\n");
- 
-+#ifndef CONFIG_PPC
-+	/* Detect if the current SoC requires the DMA transfer alignment workaround */
-+	dpaa_errata_a010022 = soc_has_errata_a010022();
-+#endif
- 	/* initialize dpaa_eth mirror values */
- 	dpaa_rx_extra_headroom = fman_get_rx_extra_headroom();
- 	dpaa_max_frm = fman_get_max_frm();
diff --git a/target/linux/layerscape/patches-5.4/701-net-0055-sdk_fman-DPAA-dTSEC-ports-fail-to-work-when-link-cha.patch b/target/linux/layerscape/patches-5.4/701-net-0055-sdk_fman-DPAA-dTSEC-ports-fail-to-work-when-link-cha.patch
deleted file mode 100644
index e17c2a7a4d..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0055-sdk_fman-DPAA-dTSEC-ports-fail-to-work-when-link-cha.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From 2b3d05ed1cb560b3a0b0721435c2fd73a19bd9bc Mon Sep 17 00:00:00 2001
-From: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
-Date: Mon, 29 May 2017 09:25:24 +0300
-Subject: [PATCH] sdk_fman: DPAA-dTSEC ports fail to work when link changes
-
-Signed-off-by: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
----
- .../freescale/sdk_fman/Peripherals/FM/MAC/dtsec.c  | 57 ++++++++++++++++++----
- 1 file changed, 48 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/dtsec.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/dtsec.c
-@@ -386,6 +386,7 @@ static void FreeInitResources(t_Dtsec *p
- static t_Error GracefulStop(t_Dtsec *p_Dtsec, e_CommMode mode)
- {
-     struct dtsec_regs *p_MemMap;
-+    int pollTimeout = 0;
- 
-     ASSERT_COND(p_Dtsec);
- 
-@@ -408,16 +409,32 @@ static t_Error GracefulStop(t_Dtsec *p_D
-     }
- 
-     if (mode & e_COMM_MODE_TX)
--#if defined(FM_GTS_ERRATA_DTSEC_A004) || defined(FM_GTS_AFTER_MAC_ABORTED_FRAME_ERRATA_DTSEC_A0012)
--    if (p_Dtsec->fmMacControllerDriver.fmRevInfo.majorRev == 2)
--        DBG(INFO, ("GTS not supported due to DTSEC_A004 errata."));
--#else  /* not defined(FM_GTS_ERRATA_DTSEC_A004) ||... */
--#ifdef FM_GTS_UNDERRUN_ERRATA_DTSEC_A0014
--        DBG(INFO, ("GTS not supported due to DTSEC_A0014 errata."));
--#else  /* FM_GTS_UNDERRUN_ERRATA_DTSEC_A0014 */
-+    {
-+#if defined(FM_GTS_ERRATA_DTSEC_A004)
-+        if (p_Dtsec->fmMacControllerDriver.fmRevInfo.majorRev == 2)
-+            DBG(INFO, ("GTS not supported due to DTSEC_A004 errata."));
-+#else  /* not defined(FM_GTS_ERRATA_DTSEC_A004) */
-+
-         fman_dtsec_stop_tx(p_MemMap);
--#endif /* FM_GTS_UNDERRUN_ERRATA_DTSEC_A0014 */
--#endif /* defined(FM_GTS_ERRATA_DTSEC_A004) ||...  */
-+
-+#if defined(FM_GTS_UNDERRUN_ERRATA_DTSEC_A0014) || defined(FM_GTS_AFTER_MAC_ABORTED_FRAME_ERRATA_DTSEC_A0012)
-+        XX_UDelay(10);
-+#endif /* FM_GTS_UNDERRUN_ERRATA_DTSEC_A0014 || FM_GTS_AFTER_MAC_ABORTED_FRAME_ERRATA_DTSEC_A0012 */
-+#endif /* defined(FM_GTS_ERRATA_DTSEC_A004) */
-+    }
-+
-+    /* Poll GRSC/GTSC bits in IEVENT register until both are set */
-+#if defined(FM_GRS_ERRATA_DTSEC_A002) || defined(FM_GTS_ERRATA_DTSEC_A004) || defined(FM_GTS_AFTER_MAC_ABORTED_FRAME_ERRATA_DTSEC_A0012) || defined(FM_GTS_UNDERRUN_ERRATA_DTSEC_A0014) || defined(FM_GTS_AFTER_DROPPED_FRAME_ERRATA_DTSEC_A004839)
-+    XX_UDelay(10);
-+#else
-+    while (fman_dtsec_get_event(p_MemMap, DTSEC_IMASK_GRSCEN | DTSEC_IMASK_GTSCEN) != (DTSEC_IMASK_GRSCEN | DTSEC_IMASK_GTSCEN))
-+    {
-+        if (pollTimeout == 100)
-+            break;
-+        XX_UDelay(1);
-+        pollTimeout++;
-+    }
-+#endif
- 
-     return E_OK;
- }
-@@ -632,7 +649,12 @@ static t_Error DtsecSetTxPauseFrames(t_H
-                       " value should be greater than 320."));
- #endif /* FM_BAD_TX_TS_IN_B_2_B_ERRATA_DTSEC_A003 */
- 
-+    GracefulStop(p_Dtsec, e_COMM_MODE_RX_AND_TX);
-+
-     fman_dtsec_set_tx_pause_frames(p_Dtsec->p_MemMap, pauseTime);
-+
-+    GracefulRestart(p_Dtsec, e_COMM_MODE_RX_AND_TX);
-+
-     return E_OK;
- }
- 
-@@ -653,8 +675,12 @@ static t_Error DtsecRxIgnoreMacPause(t_H
-     SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_STATE);
-     SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
- 
-+    GracefulStop(p_Dtsec, e_COMM_MODE_RX_AND_TX);
-+
-     fman_dtsec_handle_rx_pause(p_Dtsec->p_MemMap, accept_pause);
- 
-+    GracefulRestart(p_Dtsec, e_COMM_MODE_RX_AND_TX);
-+
-     return E_OK;
- }
- 
-@@ -787,8 +813,13 @@ static t_Error DtsecModifyMacAddress (t_
-     /* Initialize MAC Station Address registers (1 & 2)    */
-     /* Station address have to be swapped (big endian to little endian */
-     p_Dtsec->addr = ENET_ADDR_TO_UINT64(*p_EnetAddr);
-+
-+    GracefulStop(p_Dtsec, e_COMM_MODE_RX_AND_TX);
-+
-     fman_dtsec_set_mac_address(p_Dtsec->p_MemMap, (uint8_t *)(*p_EnetAddr));
- 
-+    GracefulRestart(p_Dtsec, e_COMM_MODE_RX_AND_TX);
-+
-     return E_OK;
- }
- 
-@@ -1076,8 +1107,12 @@ static t_Error DtsecSetWakeOnLan(t_Handl
-     SANITY_CHECK_RETURN_ERROR(p_Dtsec, E_INVALID_STATE);
-     SANITY_CHECK_RETURN_ERROR(!p_Dtsec->p_DtsecDriverParam, E_INVALID_STATE);
- 
-+    GracefulStop(p_Dtsec, e_COMM_MODE_RX_AND_TX);
-+
-     fman_dtsec_set_wol(p_Dtsec->p_MemMap, en);
- 
-+    GracefulRestart(p_Dtsec, e_COMM_MODE_RX_AND_TX);
-+
-     return E_OK;
- }
- 
-@@ -1098,11 +1133,15 @@ static t_Error DtsecAdjustLink(t_Handle
-     enet_speed = (enum enet_speed) ENET_SPEED_FROM_MODE(p_Dtsec->enetMode);
-     p_Dtsec->halfDuplex = !fullDuplex;
- 
-+    GracefulStop(p_Dtsec, e_COMM_MODE_RX_AND_TX);
-+
-     err = fman_dtsec_adjust_link(p_Dtsec->p_MemMap, enet_interface, enet_speed, fullDuplex);
- 
-     if (err == -EINVAL)
-         RETURN_ERROR(MAJOR, E_CONFLICT, ("Ethernet interface does not support Half Duplex mode"));
- 
-+    GracefulRestart(p_Dtsec, e_COMM_MODE_RX_AND_TX);
-+
-     return (t_Error)err;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0056-sdk-dpa-adapt-compatibles-to-upstream-binding-docume.patch b/target/linux/layerscape/patches-5.4/701-net-0056-sdk-dpa-adapt-compatibles-to-upstream-binding-docume.patch
deleted file mode 100644
index c1903a2bb3..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0056-sdk-dpa-adapt-compatibles-to-upstream-binding-docume.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From d3ec1bf411a208028d06ffbb0f0ed461096977a8 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Fri, 20 Oct 2017 16:42:26 +0300
-Subject: [PATCH] sdk: dpa: adapt compatibles to upstream binding document
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/mac.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/mac.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac.c
-@@ -133,10 +133,10 @@ static int __cold free_macdev(struct mac
- 
- static const struct of_device_id mac_match[] = {
- 	[DTSEC] = {
--		.compatible	= "fsl,fman-1g-mac"
-+		.compatible	= "fsl,fman-dtsec"
- 	},
- 	[XGMAC] = {
--		.compatible	= "fsl,fman-10g-mac"
-+		.compatible	= "fsl,fman-xgec"
- 	},
- 	[MEMAC] = {
- 		.compatible	= "fsl,fman-memac"
diff --git a/target/linux/layerscape/patches-5.4/701-net-0057-sdk_fman-fix-probing-of-10G-ports-on-T102x.patch b/target/linux/layerscape/patches-5.4/701-net-0057-sdk_fman-fix-probing-of-10G-ports-on-T102x.patch
deleted file mode 100644
index e772c95977..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0057-sdk_fman-fix-probing-of-10G-ports-on-T102x.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 7dd27606d9b7f28a7367e4b9444bed7d573f4b6c Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Fri, 23 Mar 2018 16:33:19 +0200
-Subject: [PATCH] sdk_fman: fix probing of 10G ports on T102x
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../sdk_fman/src/wrapper/lnxwrp_fm_port.c          | 24 +++++++++++++++++-----
- 1 file changed, 19 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm_port.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm_port.c
-@@ -388,7 +388,14 @@ static t_LnxWrpFmPortDev *ReadFmPortDevT
- 			settings.param.specificParams.nonRxParams.qmChannel =
- 			p_LnxWrpFmPortDev->txCh;
- 	} else if (of_device_is_compatible(port_node, "fsl,fman-port-10g-tx")) {
-+#ifndef CONFIG_FMAN_ARM
-+		/* On T102x, the 10G TX port IDs start from 0x28 */
-+		if (IS_T1023_T1024)
-+			tmp_prop -= 0x28;
-+		else
-+#endif
- 		tmp_prop -= 0x30;
-+
- 		if (unlikely(tmp_prop>= FM_MAX_NUM_OF_10G_TX_PORTS)) {
- 			REPORT_ERROR(MAJOR, E_INVALID_VALUE,
- 					("of_get_property(%s, cell-index) failed",
-@@ -399,7 +406,7 @@ static t_LnxWrpFmPortDev *ReadFmPortDevT
- 			FM_MAX_NUM_OF_1G_TX_PORTS];
- #ifndef CONFIG_FMAN_ARM
- 		if (IS_T1023_T1024)
--			p_LnxWrpFmPortDev = &p_LnxWrpFmDev->txPorts[*uint32_prop];
-+			p_LnxWrpFmPortDev = &p_LnxWrpFmDev->txPorts[tmp_prop];
- #endif
- 
- 		p_LnxWrpFmPortDev->id = tmp_prop;
-@@ -437,7 +444,14 @@ static t_LnxWrpFmPortDev *ReadFmPortDevT
- 		if (p_LnxWrpFmDev->pcdActive)
- 			p_LnxWrpFmPortDev->defPcd = p_LnxWrpFmDev->defPcd;
- 	} else if (of_device_is_compatible(port_node, "fsl,fman-port-10g-rx")) {
-+#ifndef CONFIG_FMAN_ARM
-+		/* On T102x, the 10G RX port IDs start from 0x08 */
-+		if (IS_T1023_T1024)
-+			tmp_prop -= 0x8;
-+		else
-+#endif
- 		tmp_prop -= 0x10;
-+
- 		if (unlikely(tmp_prop >= FM_MAX_NUM_OF_10G_RX_PORTS)) {
- 			REPORT_ERROR(MAJOR, E_INVALID_VALUE,
- 					("of_get_property(%s, cell-index) failed",
-@@ -449,7 +463,7 @@ static t_LnxWrpFmPortDev *ReadFmPortDevT
- 
- #ifndef CONFIG_FMAN_ARM
- 		if (IS_T1023_T1024)
--			p_LnxWrpFmPortDev = &p_LnxWrpFmDev->rxPorts[*uint32_prop];
-+			p_LnxWrpFmPortDev = &p_LnxWrpFmDev->rxPorts[tmp_prop];
- #endif
- 
- 		p_LnxWrpFmPortDev->id = tmp_prop;
-@@ -637,7 +651,7 @@ static t_Error CheckNConfigFmPortAdvArgs
-     uint32_prop = (uint32_t *)of_get_property(port_node, "ar-tables-sizes",
- 	&lenp);
-     if (uint32_prop) {
--    
-+
-     	if (WARN_ON(lenp != sizeof(uint32_t)*8))
-             RETURN_ERROR(MINOR, E_INVALID_VALUE, NO_MSG);
-     	if (WARN_ON(p_LnxWrpFmPortDev->settings.param.portType !=
-@@ -671,7 +685,7 @@ static t_Error CheckNConfigFmPortAdvArgs
-         if (uint32_prop) {
-         	if (WARN_ON(lenp != sizeof(uint32_t)*3))
-                 RETURN_ERROR(MINOR, E_INVALID_VALUE, NO_MSG);
--         
-+
-             p_LnxWrpFmPortDev->dsar_table_sizes.max_num_of_ip_prot_filtering  =
- 		(uint16_t)be32_to_cpu(uint32_prop[0]);
-             p_LnxWrpFmPortDev->dsar_table_sizes.max_num_of_tcp_port_filtering =
-@@ -679,7 +693,7 @@ static t_Error CheckNConfigFmPortAdvArgs
-             p_LnxWrpFmPortDev->dsar_table_sizes.max_num_of_udp_port_filtering =
- 		(uint16_t)be32_to_cpu(uint32_prop[2]);
-         }
--        
-+
-         if ((err = FM_PORT_ConfigDsarSupport(p_LnxWrpFmPortDev->h_Dev,
- 		(t_FmPortDsarTablesSizes*)&p_LnxWrpFmPortDev->dsar_table_sizes)) != E_OK)
- 		RETURN_ERROR(MINOR, err, NO_MSG);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0058-sdk_fman-probe-OH-ports-on-PPC.patch b/target/linux/layerscape/patches-5.4/701-net-0058-sdk_fman-probe-OH-ports-on-PPC.patch
deleted file mode 100644
index 31d86dd59e..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0058-sdk_fman-probe-OH-ports-on-PPC.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 11a68a2d48fee4524163c5ce36477bafb6515a98 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 26 Mar 2018 10:48:19 +0300
-Subject: [PATCH] sdk_fman: probe OH ports on PPC
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm_port.c | 12 +++++++++++-
- 1 file changed, 11 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm_port.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm_port.c
-@@ -303,7 +303,13 @@ static t_LnxWrpFmPortDev *ReadFmPortDevT
- 	tmp_prop = be32_to_cpu(*uint32_prop);
- 	if (WARN_ON(lenp != sizeof(uint32_t)))
- 		return NULL;
--	if (of_device_is_compatible(port_node, "fsl,fman-port-oh")) {
-+	if (of_device_is_compatible(port_node, "fsl,fman-port-oh") ||
-+	    of_device_is_compatible(port_node, "fsl,fman-v2-port-oh") ||
-+	    of_device_is_compatible(port_node, "fsl,fman-v3-port-oh")) {
-+#ifndef CONFIG_FMAN_ARM
-+		/* On PPC, OH ports start from cell-index 0x2 */
-+		tmp_prop -= 0x2;
-+#endif
- 		if (unlikely(tmp_prop >= FM_MAX_NUM_OF_OH_PORTS)) {
- 			REPORT_ERROR(MAJOR, E_INVALID_VALUE,
- 				     ("of_get_property(%s, cell-index) failed",
-@@ -1433,6 +1439,10 @@ static const struct of_device_id fm_port
- 	{
- 	 .compatible = "fsl,fman-port-oh"},
- 	{
-+	 .compatible = "fsl,fman-v2-port-oh"},
-+	{
-+	 .compatible = "fsl,fman-v3-port-oh"},
-+	{
- 	 .compatible = "fsl,fman-port-1g-rx"},
- 	{
- 	 .compatible = "fsl,fman-port-10g-rx"},
diff --git a/target/linux/layerscape/patches-5.4/701-net-0059-sdk_fman-on-P-series-platforms-the-OH-ports-start-at.patch b/target/linux/layerscape/patches-5.4/701-net-0059-sdk_fman-on-P-series-platforms-the-OH-ports-start-at.patch
deleted file mode 100644
index 6afc1c07f7..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0059-sdk_fman-on-P-series-platforms-the-OH-ports-start-at.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 7eb5f0a192efbe1fa94490881858ed45c5373233 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 2 Apr 2018 18:19:27 +0300
-Subject: [PATCH] sdk_fman: on P-series platforms, the OH ports start at offset
- 1
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm_port.c | 12 ++++++++++--
- 1 file changed, 10 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm_port.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm_port.c
-@@ -307,9 +307,17 @@ static t_LnxWrpFmPortDev *ReadFmPortDevT
- 	    of_device_is_compatible(port_node, "fsl,fman-v2-port-oh") ||
- 	    of_device_is_compatible(port_node, "fsl,fman-v3-port-oh")) {
- #ifndef CONFIG_FMAN_ARM
--		/* On PPC, OH ports start from cell-index 0x2 */
-+#ifdef CONFIG_FMAN_P3040_P4080_P5020
-+		/* On PPC FMan v2, OH ports start from cell-index 0x1 */
-+		tmp_prop -= 0x1;
-+#else
-+		/* On PPC FMan v3 (Low and High), OH ports start from
-+		 * cell-index 0x2
-+		 */
- 		tmp_prop -= 0x2;
--#endif
-+#endif // CONFIG_FMAN_P3040_P4080_P5020
-+#endif // CONFIG_FMAN_ARM
-+
- 		if (unlikely(tmp_prop >= FM_MAX_NUM_OF_OH_PORTS)) {
- 			REPORT_ERROR(MAJOR, E_INVALID_VALUE,
- 				     ("of_get_property(%s, cell-index) failed",
diff --git a/target/linux/layerscape/patches-5.4/701-net-0060-sdk_fman-disable-timer-code.patch b/target/linux/layerscape/patches-5.4/701-net-0060-sdk_fman-disable-timer-code.patch
deleted file mode 100644
index 6b8df304c5..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0060-sdk_fman-disable-timer-code.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From de27589a9862f51d2f62eda586f18dfc128af143 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Wed, 18 Apr 2018 08:58:09 +0300
-Subject: [PATCH] sdk_fman: disable timer code
-
-The (unused) timer code is no longer compatible with the newer
-kernel API. Disabling the incompatible code.
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_fman/src/xx/xx_linux.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/src/xx/xx_linux.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/xx/xx_linux.c
-@@ -614,7 +614,7 @@ uint32_t XX_CurrentTime(void)
-     return (jiffies*1000)/HZ;
- }
- 
--
-+#if 0
- t_Handle XX_CreateTimer(void)
- {
-     struct timer_list *p_Timer = (struct timer_list *)XX_Malloc(sizeof(struct timer_list));
-@@ -691,6 +691,7 @@ int XX_TimerIsActive(t_Handle h_Timer)
- {
-   return timer_pending((struct timer_list *)h_Timer);
- }
-+#endif
- 
- uint32_t XX_Sleep(uint32_t msecs)
- {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0061-sdk_fman-disable-timer-code-in-arm-code.patch b/target/linux/layerscape/patches-5.4/701-net-0061-sdk_fman-disable-timer-code-in-arm-code.patch
deleted file mode 100644
index 9822f525ef..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0061-sdk_fman-disable-timer-code-in-arm-code.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 796f8a61e866183425a54fd8b45d5ccaebadad78 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Wed, 18 Apr 2018 23:02:36 +0300
-Subject: [PATCH] sdk_fman: disable timer code in arm code
-
-The (unused) timer code is no longer compatible with the newer
-kernel API. Disabling the incompatible code in the arm64 code.
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_fman/src/xx/xx_arm_linux.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/src/xx/xx_arm_linux.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/xx/xx_arm_linux.c
-@@ -607,7 +607,7 @@ uint32_t XX_CurrentTime(void)
-     return (jiffies*1000)/HZ;
- }
- 
--
-+#if 0
- t_Handle XX_CreateTimer(void)
- {
-     struct timer_list *p_Timer = (struct timer_list *)XX_Malloc(sizeof(struct timer_list));
-@@ -684,6 +684,7 @@ int XX_TimerIsActive(t_Handle h_Timer)
- {
-   return timer_pending((struct timer_list *)h_Timer);
- }
-+#endif
- 
- uint32_t XX_Sleep(uint32_t msecs)
- {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0062-sdk_dpa-adapt-ceetm-code-to-new-kernel-API.patch b/target/linux/layerscape/patches-5.4/701-net-0062-sdk_dpa-adapt-ceetm-code-to-new-kernel-API.patch
deleted file mode 100644
index 0df0aaedb9..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0062-sdk_dpa-adapt-ceetm-code-to-new-kernel-API.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From 4026225a854760fa355e393a386b6c96d794bce2 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Tue, 24 Apr 2018 17:07:25 +0300
-Subject: [PATCH] sdk_dpa: adapt ceetm code to new kernel API
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c   | 26 +++++++++++++---------
- 1 file changed, 16 insertions(+), 10 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -577,7 +577,8 @@ nla_put_failure:
- 
- /* Configure a root ceetm qdisc */
- static int ceetm_init_root(struct Qdisc *sch, struct ceetm_qdisc *priv,
--			   struct tc_ceetm_qopt *qopt)
-+			   struct tc_ceetm_qopt *qopt,
-+			   struct netlink_ext_ack *extack)
- {
- 	struct netdev_queue *dev_queue;
- 	struct Qdisc *qdisc;
-@@ -622,7 +623,7 @@ static int ceetm_init_root(struct Qdisc
- 				      TC_H_MIN(i + PFIFO_MIN_OFFSET));
- 
- 		qdisc = qdisc_create_dflt(dev_queue, &pfifo_qdisc_ops,
--					  parent_id);
-+					  parent_id, extack);
- 		if (!qdisc) {
- 			err = -ENOMEM;
- 			goto err_init_root;
-@@ -1035,7 +1036,8 @@ err_init_wbfs:
- }
- 
- /* Configure a generic ceetm qdisc */
--static int ceetm_init(struct Qdisc *sch, struct nlattr *opt)
-+static int ceetm_init(struct Qdisc *sch, struct nlattr *opt,
-+		      struct netlink_ext_ack *extack)
- {
- 	struct tc_ceetm_qopt *qopt;
- 	struct nlattr *tb[TCA_CEETM_QOPS + 1];
-@@ -1053,7 +1055,7 @@ static int ceetm_init(struct Qdisc *sch,
- 		return -EINVAL;
- 	}
- 
--	ret = tcf_block_get(&priv->block, &priv->filter_list, sch);
-+	ret = tcf_block_get(&priv->block, &priv->filter_list, sch, extack);
- 	if (ret)
- 		return ret;
- 
-@@ -1087,7 +1089,7 @@ static int ceetm_init(struct Qdisc *sch,
- 
- 	switch (priv->type) {
- 	case CEETM_ROOT:
--		ret = ceetm_init_root(sch, priv, qopt);
-+		ret = ceetm_init_root(sch, priv, qopt, extack);
- 		break;
- 	case CEETM_PRIO:
- 		ret = ceetm_init_prio(sch, priv, qopt);
-@@ -1224,7 +1226,8 @@ change_err:
- }
- 
- /* Edit a ceetm qdisc */
--static int ceetm_change(struct Qdisc *sch, struct nlattr *opt)
-+static int ceetm_change(struct Qdisc *sch, struct nlattr *opt,
-+			struct netlink_ext_ack *extack)
- {
- 	struct tc_ceetm_qopt *qopt;
- 	struct nlattr *tb[TCA_CEETM_QOPS + 1];
-@@ -1410,7 +1413,8 @@ static int ceetm_cls_change_wbfs(struct
- 
- /* Add a ceetm root class or configure a ceetm root/prio/wbfs class */
- static int ceetm_cls_change(struct Qdisc *sch, u32 classid, u32 parentid,
--			    struct nlattr **tca, unsigned long *arg)
-+			    struct nlattr **tca, unsigned long *arg,
-+			    struct netlink_ext_ack *extack)
- {
- 	int err;
- 	u64 bps;
-@@ -1505,7 +1509,7 @@ static int ceetm_cls_change(struct Qdisc
- 	if (!cl)
- 		return -ENOMEM;
- 
--	err = tcf_block_get(&cl->block, &cl->filter_list, sch);
-+	err = tcf_block_get(&cl->block, &cl->filter_list, sch, extack);
- 	if (err) {
- 		kfree(cl);
- 		return err;
-@@ -1699,7 +1703,8 @@ static struct Qdisc *ceetm_cls_leaf(stru
- }
- 
- static int ceetm_cls_graft(struct Qdisc *sch, unsigned long arg,
--			   struct Qdisc *new, struct Qdisc **old)
-+			   struct Qdisc *new, struct Qdisc **old,
-+			   struct netlink_ext_ack *extack)
- {
- 	if (new && strcmp(new->ops->id, ceetm_qdisc_ops.id)) {
- 		pr_err("CEETM: only ceetm qdiscs can be attached to ceetm classes\n");
-@@ -1763,7 +1768,8 @@ static int ceetm_cls_dump_stats(struct Q
- 	return gnet_stats_copy_app(d, &xstats, sizeof(xstats));
- }
- 
--static struct tcf_block *ceetm_tcf_block(struct Qdisc *sch, unsigned long arg)
-+static struct tcf_block *ceetm_tcf_block(struct Qdisc *sch, unsigned long arg,
-+					 struct netlink_ext_ack *extack)
- {
- 	struct ceetm_qdisc *priv = qdisc_priv(sch);
- 	struct ceetm_class *cl = (struct ceetm_class *)arg;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0063-sdk_dpaa-propagate-the-skb-ownership-information.patch b/target/linux/layerscape/patches-5.4/701-net-0063-sdk_dpaa-propagate-the-skb-ownership-information.patch
deleted file mode 100644
index f906dc9771..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0063-sdk_dpaa-propagate-the-skb-ownership-information.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 1a5fe4c83c7ba997a7fc433fcfc4818d48689ecc Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Wed, 25 Apr 2018 18:49:32 +0300
-Subject: [PATCH] sdk_dpaa: propagate the skb ownership information
-
-Some skbs on the Tx path may be reallocated by the driver
-due to insufficient headroom, in which case the socket
-value gets lost.
-
-Make sure we propagate the skb ownership information to the
-new skb, since it's needed by the Tx timestamp function in
-the kernel.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -1113,6 +1113,11 @@ int __hot dpa_tx_extended(struct sk_buff
- 				percpu_stats->tx_errors++;
- 				return NETDEV_TX_OK;
- 			}
-+
-+			/* propagate the skb ownership information */
-+			if (skb->sk)
-+				skb_set_owner_w(skb_new, skb->sk);
-+
- 			dev_kfree_skb(skb);
- 			skb = skb_new;
- 		}
diff --git a/target/linux/layerscape/patches-5.4/701-net-0064-memac_init_phy-RGMII-fixed-link-pass-adjust_link-cal.patch b/target/linux/layerscape/patches-5.4/701-net-0064-memac_init_phy-RGMII-fixed-link-pass-adjust_link-cal.patch
deleted file mode 100644
index 7271c34ab5..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0064-memac_init_phy-RGMII-fixed-link-pass-adjust_link-cal.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 79eacb8b197f7459a75c7d3ec33ceef88475d5a1 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Fri, 4 May 2018 19:23:59 +0300
-Subject: [PATCH] memac_init_phy: RGMII fixed-link: pass adjust_link callback
- to of_phy_connect
-
-* The mEMAC configuration for RGMII is held in the IF_MODE register
-* In the driver, IF_MODE is configured in 2 places (both in fman_memac.c):
-    - fman_memac_init: sets the IF_MODE bit macro IF_MODE_RGMII_AUTO
-      (this translates to setting ENA = 1 - Enable automatic speed selection
-      - RGMII PHY in-band status information is used to select the speed
-      of operation).
-    - fman_memac_adjust_link: brings the RGMII port in ENA = 0 mode
-      (link speed not determined autonomously by the MAC, but set according
-      to SSP).
-* The issue with the current code is that in the case of RGMII fixed-link,
-  the of_phy_attach function is being called, instead of of_phy_connect
-  with a callback that calls fman_memac_adjust_link.
-* For this reason, the RGMII port is left in a state with ENA = 1. In
-  most (if not all) RGMII fixed-link setups, the link partner will not
-  send any in-bank link speed information that is expected by the mEMAC.
-* The effect is that the link speed setting will probably not be correct
-  (and will definitely not be according to the "fixed-link" property in
-  the DTS).
-* The adjust_link callback seems to be called by the PHY state machine,
-  even for fixed links, exactly once: on "link up". Therefore, this
-  patch ensures that on link up, RGMII fixed links are configured to the
-  link speed that is set in the DTS, and not left with IF_MODE[ENA] = 1.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c | 38 ++++++++++++++++++-----
- 1 file changed, 31 insertions(+), 7 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c
-@@ -502,17 +502,41 @@ static int memac_init_phy(struct net_dev
- 			  struct mac_device *mac_dev)
- {
- 	struct phy_device       *phy_dev;
-+	void (*adjust_link_handler)(struct net_device *);
- 
- 	if ((macdev2enetinterface(mac_dev) == e_ENET_MODE_XGMII_10000) ||
--	    (macdev2enetinterface(mac_dev) == e_ENET_MODE_SGMII_2500) ||
--	    of_phy_is_fixed_link(mac_dev->phy_node)) {
--		phy_dev = of_phy_connect(net_dev, mac_dev->phy_node,
--					 &adjust_link_void, 0,
--					 mac_dev->phy_if);
-+	    (macdev2enetinterface(mac_dev) == e_ENET_MODE_SGMII_2500)) {
-+		/* Pass a void link state handler to the PHY state machine
-+		 * for XGMII (10G) and SGMII 2.5G, as the hardware does not
-+		 * permit dynamic link speed adjustments. */
-+		adjust_link_handler = adjust_link_void;
-+	} else if (macdev2enetinterface(mac_dev) & e_ENET_IF_RGMII) {
-+		/* Regular RGMII ports connected to a PHY, as well as
-+		 * ports that are marked as "fixed-link" in the DTS,
-+		 * will have the adjust_link callback. This calls
-+		 * fman_memac_adjust_link in order to configure the
-+		 * IF_MODE register, which is needed in both cases.
-+		 */
-+		adjust_link_handler = adjust_link;
-+	} else if (of_phy_is_fixed_link(mac_dev->phy_node)) {
-+		/* Pass a void link state handler for fixed-link
-+		 * interfaces that are not RGMII. Only RGMII has been
-+		 * tested and confirmed to work with fixed-link. Other
-+		 * MII interfaces may need further work.
-+		 * TODO: Change this as needed.
-+		 */
-+		adjust_link_handler = adjust_link_void;
- 	} else {
--		phy_dev = of_phy_connect(net_dev, mac_dev->phy_node,
--					 &adjust_link, 0, mac_dev->phy_if);
-+		/* MII, RMII, SMII, GMII, SGMII, BASEX ports,
-+		 * that are NOT fixed-link.
-+		 * TODO: May not be needed for interfaces that
-+		 * pass through the SerDes block (*SGMII, XFI).
-+		 */
-+		adjust_link_handler = adjust_link;
- 	}
-+	phy_dev = of_phy_connect(net_dev, mac_dev->phy_node,
-+	                         adjust_link_handler, 0,
-+	                         mac_dev->phy_if);
- 
- 	if (unlikely(phy_dev == NULL) || IS_ERR(phy_dev)) {
- 		netdev_err(net_dev, "Could not connect to PHY %s\n",
diff --git a/target/linux/layerscape/patches-5.4/701-net-0065-sdk_dpaa-ceetm-avoid-use-after-free-scenarios.patch b/target/linux/layerscape/patches-5.4/701-net-0065-sdk_dpaa-ceetm-avoid-use-after-free-scenarios.patch
deleted file mode 100644
index f3d591ec0e..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0065-sdk_dpaa-ceetm-avoid-use-after-free-scenarios.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From fad6f73dc4367adb852ce6953f93f12cbb97b894 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Fri, 18 May 2018 10:33:37 +0300
-Subject: [PATCH] sdk_dpaa: ceetm: avoid use-after-free scenarios
-
-Once the pfiofo qdiscs are grafted to the netdev queues, they are destroyed
-by the kernel when required. Remove references to the pfifo qdiscs after
-grafting, in order to avoid double free scenarios.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c   | 23 +++++++++++++++++++---
- 1 file changed, 20 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -477,7 +477,9 @@ static void ceetm_destroy(struct Qdisc *
- 		if (!priv->root.qdiscs)
- 			break;
- 
--		/* Remove the pfifo qdiscs */
-+		/* Destroy the pfifo qdiscs in case they haven't been attached
-+		 * to the netdev queues yet.
-+		 */
- 		for (ntx = 0; ntx < dev->num_tx_queues; ntx++)
- 			if (priv->root.qdiscs[ntx])
- 				qdisc_destroy(priv->root.qdiscs[ntx]);
-@@ -608,7 +610,16 @@ static int ceetm_init_root(struct Qdisc
- 		goto err_init_root;
- 	}
- 
--	/* pre-allocate underlying pfifo qdiscs */
-+	/* Pre-allocate underlying pfifo qdiscs.
-+	 *
-+	 * We want to offload shaping and scheduling decisions to the hardware.
-+	 * The pfifo qdiscs will be attached to the netdev queues and will
-+	 * guide the traffic from the IP stack down to the driver with minimum
-+	 * interference.
-+	 *
-+	 * The CEETM qdiscs and classes will be crossed when the traffic
-+	 * reaches the driver.
-+	 */
- 	priv->root.qdiscs = kcalloc(dev->num_tx_queues,
- 				    sizeof(priv->root.qdiscs[0]),
- 				    GFP_KERNEL);
-@@ -1280,7 +1291,10 @@ static int ceetm_change(struct Qdisc *sc
- 	return ret;
- }
- 
--/* Attach the underlying pfifo qdiscs */
-+/* Graft the underlying pfifo qdiscs to the netdev queues.
-+ * It's safe to remove our references at this point, since the kernel will
-+ * destroy the qdiscs on its own and no cleanup from our part is required.
-+ */
- static void ceetm_attach(struct Qdisc *sch)
- {
- 	struct net_device *dev = qdisc_dev(sch);
-@@ -1296,6 +1310,9 @@ static void ceetm_attach(struct Qdisc *s
- 		if (old_qdisc)
- 			qdisc_destroy(old_qdisc);
- 	}
-+
-+	kfree(priv->root.qdiscs);
-+	priv->root.qdiscs = NULL;
- }
- 
- static unsigned long ceetm_cls_search(struct Qdisc *sch, u32 handle)
diff --git a/target/linux/layerscape/patches-5.4/701-net-0066-sdk_dpaa-ceetm-stop-the-netdev-queues-when-switching.patch b/target/linux/layerscape/patches-5.4/701-net-0066-sdk_dpaa-ceetm-stop-the-netdev-queues-when-switching.patch
deleted file mode 100644
index 49c0e2e630..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0066-sdk_dpaa-ceetm-stop-the-netdev-queues-when-switching.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From ceecb6c2de60f19c674d4e59dde2523db7a9099b Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 19 Mar 2018 18:39:59 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: stop the netdev queues when switching ceetm
- on
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -1100,7 +1100,9 @@ static int ceetm_init(struct Qdisc *sch,
- 
- 	switch (priv->type) {
- 	case CEETM_ROOT:
-+		netif_tx_stop_all_queues(dev);
- 		ret = ceetm_init_root(sch, priv, qopt, extack);
-+		netif_tx_wake_all_queues(dev);
- 		break;
- 	case CEETM_PRIO:
- 		ret = ceetm_init_prio(sch, priv, qopt);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0067-fsl_qbman-ceetm-export-the-qman_ceetm_query_cq-call.patch b/target/linux/layerscape/patches-5.4/701-net-0067-fsl_qbman-ceetm-export-the-qman_ceetm_query_cq-call.patch
deleted file mode 100644
index da4a48040a..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0067-fsl_qbman-ceetm-export-the-qman_ceetm_query_cq-call.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From d4ef67474d985f6a95ea54a7e0c11d6d0ffa9fe9 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 26 Mar 2018 17:12:17 +0300
-Subject: [PATCH] fsl_qbman: ceetm: export the qman_ceetm_query_cq call
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- include/linux/fsl_qman.h | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/include/linux/fsl_qman.h
-+++ b/include/linux/fsl_qman.h
-@@ -3813,6 +3813,18 @@ int qman_ceetm_query_lfqmt(int lfqid,
- 			   struct qm_mcr_ceetm_lfqmt_query *lfqmt_query);
- 
- /**
-+ * qman_ceetm_query_cq - Queries a CEETM CQ
-+ * @cqid: the channel ID (first byte) followed by the CQ idx
-+ * @dcpid: CEETM portal ID
-+ * @cq_query: storage for the queried CQ fields
-+ *
-+ * Returns zero for success or -EIO if the query command returns error.
-+ *
-+*/
-+int qman_ceetm_query_cq(unsigned int cqid, unsigned int dcpid,
-+			struct qm_mcr_ceetm_cq_query *cq_query);
-+
-+/**
-  * qman_ceetm_query_write_statistics - Query (and optionally write) statistics
-  * @cid: Target ID (CQID or CCGRID)
-  * @dcp_idx: CEETM portal ID
diff --git a/target/linux/layerscape/patches-5.4/701-net-0068-sdk_dpaa-ceetm-propagate-the-ceetm-channel-through-t.patch b/target/linux/layerscape/patches-5.4/701-net-0068-sdk_dpaa-ceetm-propagate-the-ceetm-channel-through-t.patch
deleted file mode 100644
index f10670241c..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0068-sdk_dpaa-ceetm-propagate-the-ceetm-channel-through-t.patch
+++ /dev/null
@@ -1,298 +0,0 @@
-From dfd2deb8bc482588999a4f03b5ab5d049e50fdb0 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 30 May 2018 14:51:35 +0300
-Subject: [PATCH] sdk_dpaa: ceetm: propagate the ceetm channel through the
- qdisc tree
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c   | 61 +++++++++-------------
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h   |  4 +-
- 2 files changed, 29 insertions(+), 36 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -242,7 +242,6 @@ static int ceetm_config_lfq(struct qm_ce
- /* Configure a prio ceetm class */
- static int ceetm_config_prio_cls(struct ceetm_class *cls,
- 				 struct net_device *dev,
--				 struct qm_ceetm_channel *channel,
- 				 unsigned int id)
- {
- 	int err;
-@@ -253,22 +252,22 @@ static int ceetm_config_prio_cls(struct
- 		return err;
- 
- 	/* Claim and configure the CCG */
--	err = ceetm_config_ccg(&cls->prio.ccg, channel, id, cls->prio.fq,
-+	err = ceetm_config_ccg(&cls->prio.ccg, cls->ch, id, cls->prio.fq,
- 			       dpa_priv);
- 	if (err)
- 		return err;
- 
- 	/* Claim and configure the CQ */
--	err = qman_ceetm_cq_claim(&cls->prio.cq, channel, id, cls->prio.ccg);
-+	err = qman_ceetm_cq_claim(&cls->prio.cq, cls->ch, id, cls->prio.ccg);
- 	if (err)
- 		return err;
- 
- 	if (cls->shaped) {
--		err = qman_ceetm_channel_set_cq_cr_eligibility(channel, id, 1);
-+		err = qman_ceetm_channel_set_cq_cr_eligibility(cls->ch, id, 1);
- 		if (err)
- 			return err;
- 
--		err = qman_ceetm_channel_set_cq_er_eligibility(channel, id, 1);
-+		err = qman_ceetm_channel_set_cq_er_eligibility(cls->ch, id, 1);
- 		if (err)
- 			return err;
- 	}
-@@ -284,7 +283,6 @@ static int ceetm_config_prio_cls(struct
- /* Configure a wbfs ceetm class */
- static int ceetm_config_wbfs_cls(struct ceetm_class *cls,
- 				 struct net_device *dev,
--				 struct qm_ceetm_channel *channel,
- 				 unsigned int id, int type)
- {
- 	int err;
-@@ -295,17 +293,17 @@ static int ceetm_config_wbfs_cls(struct
- 		return err;
- 
- 	/* Claim and configure the CCG */
--	err = ceetm_config_ccg(&cls->wbfs.ccg, channel, id, cls->wbfs.fq,
-+	err = ceetm_config_ccg(&cls->wbfs.ccg, cls->ch, id, cls->wbfs.fq,
- 			       dpa_priv);
- 	if (err)
- 		return err;
- 
- 	/* Claim and configure the CQ */
- 	if (type == WBFS_GRP_B)
--		err = qman_ceetm_cq_claim_B(&cls->wbfs.cq, channel, id,
-+		err = qman_ceetm_cq_claim_B(&cls->wbfs.cq, cls->ch, id,
- 					    cls->wbfs.ccg);
- 	else
--		err = qman_ceetm_cq_claim_A(&cls->wbfs.cq, channel, id,
-+		err = qman_ceetm_cq_claim_A(&cls->wbfs.cq, cls->ch, id,
- 					    cls->wbfs.ccg);
- 	if (err)
- 		return err;
-@@ -366,10 +364,10 @@ static void ceetm_cls_destroy(struct Qdi
- 			cl->root.child = NULL;
- 		}
- 
--		if (cl->root.ch && qman_ceetm_channel_release(cl->root.ch))
-+		if (cl->ch && qman_ceetm_channel_release(cl->ch))
- 			pr_err(KBUILD_BASENAME
- 			       " : %s : error releasing the channel %d\n",
--			       __func__, cl->root.ch->idx);
-+			       __func__, cl->ch->idx);
- 
- 		break;
- 
-@@ -766,6 +764,7 @@ static int ceetm_init_prio(struct Qdisc
- 
- 	priv->shaped = parent_cl->shaped;
- 	priv->prio.qcount = qopt->qcount;
-+	priv->prio.ch = parent_cl->ch;
- 
- 	/* Create and configure qcount child classes */
- 	for (i = 0; i < priv->prio.qcount; i++) {
-@@ -790,6 +789,7 @@ static int ceetm_init_prio(struct Qdisc
- 		child_cl->type = CEETM_PRIO;
- 		child_cl->shaped = priv->shaped;
- 		child_cl->prio.child = NULL;
-+		child_cl->ch = priv->prio.ch;
- 
- 		/* All shaped CQs have CR and ER enabled by default */
- 		child_cl->prio.cr = child_cl->shaped;
-@@ -798,8 +798,7 @@ static int ceetm_init_prio(struct Qdisc
- 		child_cl->prio.cq = NULL;
- 
- 		/* Configure the corresponding hardware CQ */
--		err = ceetm_config_prio_cls(child_cl, dev,
--					    parent_cl->root.ch, i);
-+		err = ceetm_config_prio_cls(child_cl, dev, i);
- 		if (err) {
- 			pr_err(KBUILD_BASENAME " : %s : failed to configure the ceetm prio class %X\n",
- 			       __func__, child_cl->common.classid);
-@@ -831,7 +830,6 @@ static int ceetm_init_wbfs(struct Qdisc
- 	struct ceetm_class *parent_cl, *child_cl, *root_cl;
- 	struct Qdisc *parent_qdisc;
- 	struct ceetm_qdisc *parent_priv;
--	struct qm_ceetm_channel *channel;
- 	struct net_device *dev = qdisc_dev(sch);
- 
- 	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-@@ -904,8 +902,7 @@ static int ceetm_init_wbfs(struct Qdisc
- 	priv->wbfs.qcount = qopt->qcount;
- 	priv->wbfs.cr = qopt->cr;
- 	priv->wbfs.er = qopt->er;
--
--	channel = root_cl->root.ch;
-+	priv->wbfs.ch = parent_cl->ch;
- 
- 	/* Configure the hardware wbfs channel groups */
- 	if (priv->wbfs.qcount == CEETM_MAX_WBFS_QCOUNT) {
-@@ -920,7 +917,7 @@ static int ceetm_init_wbfs(struct Qdisc
- 		/* Configure the group B */
- 		priv->wbfs.group_type = WBFS_GRP_B;
- 
--		err = qman_ceetm_channel_get_group(channel, &small_group,
-+		err = qman_ceetm_channel_get_group(priv->wbfs.ch, &small_group,
- 						   &prio_a, &prio_b);
- 		if (err) {
- 			pr_err(KBUILD_BASENAME " : %s : failed to get group details\n",
-@@ -938,7 +935,7 @@ static int ceetm_init_wbfs(struct Qdisc
- 		/* Configure the small group A */
- 		priv->wbfs.group_type = WBFS_GRP_A;
- 
--		err = qman_ceetm_channel_get_group(channel, &small_group,
-+		err = qman_ceetm_channel_get_group(priv->wbfs.ch, &small_group,
- 						   &prio_a, &prio_b);
- 		if (err) {
- 			pr_err(KBUILD_BASENAME " : %s : failed to get group details\n",
-@@ -953,13 +950,13 @@ static int ceetm_init_wbfs(struct Qdisc
- 		prio_b = prio_b ? : prio_a;
- 	}
- 
--	err = qman_ceetm_channel_set_group(channel, small_group, prio_a,
-+	err = qman_ceetm_channel_set_group(priv->wbfs.ch, small_group, prio_a,
- 					   prio_b);
- 	if (err)
- 		goto err_init_wbfs;
- 
- 	if (priv->shaped) {
--		err = qman_ceetm_channel_set_group_cr_eligibility(channel,
-+		err = qman_ceetm_channel_set_group_cr_eligibility(priv->wbfs.ch,
- 								  group_b,
- 								priv->wbfs.cr);
- 		if (err) {
-@@ -968,7 +965,7 @@ static int ceetm_init_wbfs(struct Qdisc
- 			goto err_init_wbfs;
- 		}
- 
--		err = qman_ceetm_channel_set_group_er_eligibility(channel,
-+		err = qman_ceetm_channel_set_group_er_eligibility(priv->wbfs.ch,
- 								  group_b,
- 								priv->wbfs.er);
- 		if (err) {
-@@ -1003,13 +1000,14 @@ static int ceetm_init_wbfs(struct Qdisc
- 		child_cl->wbfs.fq = NULL;
- 		child_cl->wbfs.cq = NULL;
- 		child_cl->wbfs.weight = qopt->qweight[i];
-+		child_cl->ch = priv->wbfs.ch;
- 
- 		if (priv->wbfs.group_type == WBFS_GRP_B)
- 			id = WBFS_GRP_B_OFFSET + i;
- 		else
- 			id = WBFS_GRP_A_OFFSET + i;
- 
--		err = ceetm_config_wbfs_cls(child_cl, dev, channel, id,
-+		err = ceetm_config_wbfs_cls(child_cl, dev, id,
- 					    priv->wbfs.group_type);
- 		if (err) {
- 			pr_err(KBUILD_BASENAME " : %s : failed to configure the ceetm wbfs class %X\n",
-@@ -1178,9 +1176,6 @@ static int ceetm_change_wbfs(struct Qdis
- {
- 	int err;
- 	bool group_b;
--	struct qm_ceetm_channel *channel;
--	struct ceetm_class *prio_class, *root_class;
--	struct ceetm_qdisc *prio_qdisc;
- 
- 	if (qopt->qcount) {
- 		pr_err("CEETM: the qcount can not be modified\n");
-@@ -1206,14 +1201,10 @@ static int ceetm_change_wbfs(struct Qdis
- 	if (!priv->shaped)
- 		return 0;
- 
--	prio_class = priv->wbfs.parent;
--	prio_qdisc = qdisc_priv(prio_class->parent);
--	root_class = prio_qdisc->prio.parent;
--	channel = root_class->root.ch;
- 	group_b = priv->wbfs.group_type == WBFS_GRP_B;
- 
- 	if (qopt->cr != priv->wbfs.cr) {
--		err = qman_ceetm_channel_set_group_cr_eligibility(channel,
-+		err = qman_ceetm_channel_set_group_cr_eligibility(priv->wbfs.ch,
- 								  group_b,
- 								  qopt->cr);
- 		if (err)
-@@ -1222,7 +1213,7 @@ static int ceetm_change_wbfs(struct Qdis
- 	}
- 
- 	if (qopt->er != priv->wbfs.er) {
--		err = qman_ceetm_channel_set_group_er_eligibility(channel,
-+		err = qman_ceetm_channel_set_group_er_eligibility(priv->wbfs.ch,
- 								  group_b,
- 								  qopt->er);
- 		if (err)
-@@ -1337,7 +1328,7 @@ static int ceetm_cls_change_root(struct
- 
- 	if (cl->shaped && cl->root.rate != copt->rate) {
- 		bps = copt->rate << 3; /* Bps -> bps */
--		err = qman_ceetm_channel_set_commit_rate_bps(cl->root.ch, bps,
-+		err = qman_ceetm_channel_set_commit_rate_bps(cl->ch, bps,
- 							     dev->mtu);
- 		if (err)
- 			goto change_cls_err;
-@@ -1346,7 +1337,7 @@ static int ceetm_cls_change_root(struct
- 
- 	if (cl->shaped && cl->root.ceil != copt->ceil) {
- 		bps = copt->ceil << 3; /* Bps -> bps */
--		err = qman_ceetm_channel_set_excess_rate_bps(cl->root.ch, bps,
-+		err = qman_ceetm_channel_set_excess_rate_bps(cl->ch, bps,
- 							     dev->mtu);
- 		if (err)
- 			goto change_cls_err;
-@@ -1354,7 +1345,7 @@ static int ceetm_cls_change_root(struct
- 	}
- 
- 	if (!cl->shaped && cl->root.tbl != copt->tbl) {
--		err = qman_ceetm_channel_set_weight(cl->root.ch, copt->tbl);
-+		err = qman_ceetm_channel_set_weight(cl->ch, copt->tbl);
- 		if (err)
- 			goto change_cls_err;
- 		cl->root.tbl = copt->tbl;
-@@ -1555,7 +1546,7 @@ static int ceetm_cls_change(struct Qdisc
- 		goto claim_err;
- 	}
- 
--	cl->root.ch = channel;
-+	cl->ch = channel;
- 
- 	if (cl->shaped) {
- 		/* Configure the channel shaper */
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h
-@@ -121,12 +121,14 @@ struct root_q {
- struct prio_q {
- 	__u16 qcount;
- 	struct ceetm_class *parent;
-+	struct qm_ceetm_channel *ch;
- };
- 
- struct wbfs_q {
- 	__u16 qcount;
- 	int group_type;
- 	struct ceetm_class *parent;
-+	struct qm_ceetm_channel *ch;
- 	__u16 cr;
- 	__u16 er;
- };
-@@ -165,7 +167,6 @@ struct root_c {
- 	bool wbfs_grp_b;
- 	bool wbfs_grp_large;
- 	struct Qdisc *child;
--	struct qm_ceetm_channel *ch;
- };
- 
- struct prio_c {
-@@ -194,6 +195,7 @@ struct ceetm_class {
- 	struct tcf_proto *filter_list; /* class attached filters */
- 	struct tcf_block *block;
- 	struct Qdisc *parent;
-+	struct qm_ceetm_channel *ch;
- 	bool shaped;
- 	int type; /* ROOT/PRIO/WBFS */
- 	union {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0069-sdk_dpaa-ceetm-reset-the-wbfs-groups-and-priorities-.patch b/target/linux/layerscape/patches-5.4/701-net-0069-sdk_dpaa-ceetm-reset-the-wbfs-groups-and-priorities-.patch
deleted file mode 100644
index fb6ac756d5..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0069-sdk_dpaa-ceetm-reset-the-wbfs-groups-and-priorities-.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 3aa80007715ecfd944e02029b59fec5c74c8598e Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 30 May 2018 15:04:37 +0300
-Subject: [PATCH] sdk_dpaa: ceetm: reset the wbfs groups and priorities on
- teardown
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -491,6 +491,10 @@ static void ceetm_destroy(struct Qdisc *
- 		break;
- 
- 	case CEETM_WBFS:
-+		/* Reset the WBFS groups and priorities */
-+		if (priv->wbfs.ch)
-+			qman_ceetm_channel_set_group(priv->wbfs.ch, 1, 0, 0);
-+
- 		if (priv->wbfs.parent)
- 			priv->wbfs.parent->prio.child = NULL;
- 		break;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0070-sdk_dpaa-ceetm-WQ-CEETM-mode-switchover-cleanup.patch b/target/linux/layerscape/patches-5.4/701-net-0070-sdk_dpaa-ceetm-WQ-CEETM-mode-switchover-cleanup.patch
deleted file mode 100644
index 76c0ecacbc..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0070-sdk_dpaa-ceetm-WQ-CEETM-mode-switchover-cleanup.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From c095bbc29eeae597c47c90d41fab472be9e14ca6 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 30 May 2018 15:26:47 +0300
-Subject: [PATCH] sdk_dpaa: ceetm: WQ/CEETM mode switchover cleanup
-
-Wait for the WQ TX FQs to empty before switching from WQ to CEETM mode.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c   | 26 ++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -65,6 +65,31 @@ static void get_dcp_and_sp(struct net_de
- 	}
- }
- 
-+/* Wait for the DPAA Eth driver WQ TX FQs to empty */
-+static void dpaa_drain_fqs(struct net_device *dev)
-+{
-+	const struct dpa_priv_s *priv = netdev_priv(dev);
-+	struct qm_mcr_queryfq_np np;
-+	struct qman_fq *fq;
-+	int ret, i;
-+
-+	for (i = 0; i < DPAA_ETH_TX_QUEUES; i ++) {
-+		fq = priv->egress_fqs[i];
-+		while (true) {
-+			ret = qman_query_fq_np(fq, &np);
-+			if (unlikely(ret)) {
-+				pr_err(KBUILD_BASENAME
-+				       " : %s : unable to query FQ %x: %d\n",
-+				       __func__, fq->fqid, ret);
-+				break;
-+			}
-+
-+			if (np.frm_cnt == 0)
-+				break;
-+		}
-+	}
-+}
-+
- /* Enqueue Rejection Notification callback */
- static void ceetm_ern(struct qman_portal *portal, struct qman_fq *fq,
- 		      const struct qm_mr_entry *msg)
-@@ -1103,6 +1128,7 @@ static int ceetm_init(struct Qdisc *sch,
- 	switch (priv->type) {
- 	case CEETM_ROOT:
- 		netif_tx_stop_all_queues(dev);
-+		dpaa_drain_fqs(dev);
- 		ret = ceetm_init_root(sch, priv, qopt, extack);
- 		netif_tx_wake_all_queues(dev);
- 		break;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0071-sdk_dpaa-ceetm-drain-the-ceetm-CQs-on-destroy.patch b/target/linux/layerscape/patches-5.4/701-net-0071-sdk_dpaa-ceetm-drain-the-ceetm-CQs-on-destroy.patch
deleted file mode 100644
index bdca2361a0..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0071-sdk_dpaa-ceetm-drain-the-ceetm-CQs-on-destroy.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From fe7ed61721646077de5eb06a105e60634374a00c Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Thu, 31 May 2018 10:45:50 +0300
-Subject: [PATCH] sdk_dpaa: ceetm: drain the ceetm CQs on destroy
-
-The CEETM CQs must be empty when configured. To guarantee this, stop all
-transmissions and wait for them to drain before releasing them. On the
-next configuration, we are certain they will be empty.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c   | 62 ++++++++++++++++++++++
- 1 file changed, 62 insertions(+)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -90,6 +90,51 @@ static void dpaa_drain_fqs(struct net_de
- 	}
- }
- 
-+/* Wait for the DPAA CEETM TX CQs to empty */
-+static void ceetm_drain_class(struct ceetm_class *cl)
-+{
-+	struct qm_mcr_ceetm_cq_query cq_query;
-+	struct qm_ceetm_cq *cq;
-+	unsigned int idx;
-+	int ret;
-+
-+	if (!cl)
-+		return;
-+
-+	switch (cl->type) {
-+	case CEETM_ROOT:
-+		/* The ROOT classes aren't directly linked to CEETM CQs */
-+		return;
-+	case CEETM_PRIO:
-+		cq = (struct qm_ceetm_cq*)cl->prio.cq;
-+		break;
-+	case CEETM_WBFS:
-+		cq = (struct qm_ceetm_cq*)cl->wbfs.cq;
-+		break;
-+	}
-+
-+	if (!cq || !cl->ch)
-+		return;
-+
-+	/* Build the query CQID by merging the channel and the CQ IDs */
-+	idx = (cq->parent->idx << 4) | cq->idx;
-+
-+	while (true) {
-+		ret = qman_ceetm_query_cq(idx,
-+					  cl->ch->dcp_idx,
-+					  &cq_query);
-+		if (unlikely(ret)) {
-+			pr_err(KBUILD_BASENAME
-+			       " : %s : unable to query CQ %x: %d\n",
-+			       __func__, idx, ret);
-+			break;
-+		}
-+
-+		if (cq_query.frm_cnt == 0)
-+			break;
-+	}
-+}
-+
- /* Enqueue Rejection Notification callback */
- static void ceetm_ern(struct qman_portal *portal, struct qman_fq *fq,
- 		      const struct qm_mr_entry *msg)
-@@ -376,6 +421,8 @@ static void ceetm_link_class(struct Qdis
- /* Destroy a ceetm class */
- static void ceetm_cls_destroy(struct Qdisc *sch, struct ceetm_class *cl)
- {
-+	struct net_device *dev = qdisc_dev(sch);
-+
- 	if (!cl)
- 		return;
- 
-@@ -402,6 +449,12 @@ static void ceetm_cls_destroy(struct Qdi
- 			cl->prio.child = NULL;
- 		}
- 
-+		/* We must make sure the CQ is empty before releasing it.
-+		 * Pause all transmissions while we wait for it to drain.
-+		 */
-+		netif_tx_stop_all_queues(dev);
-+		ceetm_drain_class(cl);
-+
- 		if (cl->prio.lfq && qman_ceetm_lfq_release(cl->prio.lfq))
- 			pr_err(KBUILD_BASENAME
- 			       " : %s : error releasing the LFQ %d\n",
-@@ -422,9 +475,16 @@ static void ceetm_cls_destroy(struct Qdi
- 		if (cl->prio.cstats)
- 			free_percpu(cl->prio.cstats);
- 
-+		netif_tx_wake_all_queues(dev);
- 		break;
- 
- 	case CEETM_WBFS:
-+		/* We must make sure the CQ is empty before releasing it.
-+		 * Pause all transmissions while we wait for it to drain.
-+		 */
-+		netif_tx_stop_all_queues(dev);
-+		ceetm_drain_class(cl);
-+
- 		if (cl->wbfs.lfq && qman_ceetm_lfq_release(cl->wbfs.lfq))
- 			pr_err(KBUILD_BASENAME
- 			       " : %s : error releasing the LFQ %d\n",
-@@ -444,6 +504,8 @@ static void ceetm_cls_destroy(struct Qdi
- 
- 		if (cl->wbfs.cstats)
- 			free_percpu(cl->wbfs.cstats);
-+
-+		netif_tx_wake_all_queues(dev);
- 	}
- 
- 	tcf_block_put(cl->block);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0072-sdk_dpaa-ls1043a-errata-adapt-to-new-skb-copy-API.patch b/target/linux/layerscape/patches-5.4/701-net-0072-sdk_dpaa-ls1043a-errata-adapt-to-new-skb-copy-API.patch
deleted file mode 100644
index fa3fe9e0b2..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0072-sdk_dpaa-ls1043a-errata-adapt-to-new-skb-copy-API.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 6589b195949605efaa26c71baa2beb3bbf77ee5d Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 3 Jul 2018 10:03:05 +0300
-Subject: [PATCH] sdk_dpaa: ls1043a errata: adapt to new skb copy API
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -852,7 +852,7 @@ static struct sk_buff *a010022_realign_s
- 		WARN_ONCE(1, "skb parsing failure\n");
- 		goto err;
- 	}
--	copy_skb_header(nskb, skb);
-+	skb_copy_header(nskb, skb);
- 
- #ifdef CONFIG_FSL_DPAA_TS
- 	/* Copy relevant timestamp info from the old skb to the new */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0073-dpaa_eth-ERR010022-adapt-to-new-skb-copy-API.patch b/target/linux/layerscape/patches-5.4/701-net-0073-dpaa_eth-ERR010022-adapt-to-new-skb-copy-API.patch
deleted file mode 100644
index 581292267c..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0073-dpaa_eth-ERR010022-adapt-to-new-skb-copy-API.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 41047fc3ae025e75a8ac9da8714dbaaef6e63aec Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 3 Jul 2018 10:04:12 +0300
-Subject: [PATCH] dpaa_eth: ERR010022: adapt to new skb copy API
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-@@ -2183,7 +2183,7 @@ static struct sk_buff *dpaa_errata_a0100
- 		WARN_ONCE(1, "skb parsing failure\n");
- 		goto err;
- 	}
--	copy_skb_header(nskb, skb);
-+	skb_copy_header(nskb, skb);
- 
- 	/* We move the headroom when we align it so we have to reset the
- 	 * network and transport header offsets relative to the new data
diff --git a/target/linux/layerscape/patches-5.4/701-net-0074-sdk_dpaa-enable-Jumbo-frame-support-on-LS1043A.patch b/target/linux/layerscape/patches-5.4/701-net-0074-sdk_dpaa-enable-Jumbo-frame-support-on-LS1043A.patch
deleted file mode 100644
index 37da91aeb4..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0074-sdk_dpaa-enable-Jumbo-frame-support-on-LS1043A.patch
+++ /dev/null
@@ -1,154 +0,0 @@
-From fcf41cba6f3ac0f33a5e9e0c7d79dbbbff586271 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 15 May 2018 11:48:42 +0300
-Subject: [PATCH] sdk_dpaa: enable Jumbo frame support on LS1043A
-
-Due to the A010022 errata restrictions, Jumbo frames on LS1043A require two
-conditions to be met:
-- on TX, the data is stored in a contiguous buffer of up to 9600 bytes
-- the data is aligned to 256 bytes
-
-The conditions are met by realigning all outgoing frames to 256 bytes.
-Also, compound pages of varying orders are allocated to accommodate the
-outgoing contiguous buffers.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/Kconfig    |  1 -
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c |  9 ++---
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h |  5 +--
- .../net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c  | 40 ++++++++--------------
- 4 files changed, 20 insertions(+), 35 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/Kconfig
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/Kconfig
-@@ -80,7 +80,6 @@ config FSL_DPAA_ETH_JUMBO_FRAME
- 	  significantly the driver's memory footprint and may even deplete
- 	  the system memory. Also, the skb truesize is altered and messages
- 	  from the stack that warn against this are bypassed.
--	  This option is not available on LS1043.
- 
- config FSL_DPAA_TS
- 	bool "Linux compliant timestamping"
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-@@ -779,12 +779,10 @@ static int dpa_private_netdev_init(struc
- 	net_dev->features |= NETIF_F_HW_ACCEL_MQ;
- 
- #ifndef CONFIG_PPC
--	/* Due to the A010022 FMan errata, we can not use contig frames larger
--	 * than 4K, nor S/G frames. We need to prevent the user from setting a
--	 * large MTU. We also stop advertising S/G and GSO support.
-+	/* Due to the A010022 FMan errata, we can not use S/G frames. We need
-+	 * to stop advertising S/G and GSO support.
- 	 */
- 	if (unlikely(dpaa_errata_a010022)) {
--		net_dev->max_mtu = DPA_BP_RAW_SIZE;
- 		net_dev->hw_features &= ~NETIF_F_SG;
- 		net_dev->features &= ~NETIF_F_GSO;
- 	}
-@@ -985,9 +983,6 @@ dpaa_eth_priv_probe(struct platform_devi
- 	/* We only want to use jumbo frame optimization if we actually have
- 	 * L2 MAX FRM set for jumbo frames as well.
- 	 */
--#ifndef CONFIG_PPC
--	if (likely(!dpaa_errata_a010022))
--#endif
- 	if(fm_get_max_frm() < 9600)
- 		dev_warn(dev,
- 			"Invalid configuration: if jumbo frames support is on, FSL_FM_MAX_FRAME_SIZE should be set to 9600\n");
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-@@ -672,8 +672,8 @@ static inline void _dpa_bp_free_pf(void
- /* LS1043A SoC has a HW issue regarding FMan DMA transactions; The issue
-  * manifests itself at high traffic rates when frames cross 4K memory
-  * boundaries or when they are not aligned to 16 bytes; For the moment, we
-- * use a SW workaround to avoid frames larger than 4K or that exceed 4K
-- * alignments and to realign the frames to 16 bytes.
-+ * use a SW workaround that realigns frames to 256 bytes. Scatter/Gather
-+ * frames aren't supported on egress.
-  */
- 
- #ifndef CONFIG_PPC
-@@ -682,6 +682,7 @@ extern bool dpaa_errata_a010022; /* SoC
- #define HAS_DMA_ISSUE(start, size) \
- 	(((uintptr_t)(start) + (size)) > \
- 	 (((uintptr_t)(start) + 0x1000) & ~0xFFF))
-+#define DPAA_A010022_HEADROOM	256
- #endif  /* !CONFIG_PPC */
- 
- #endif	/* __DPA_H */
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -407,12 +407,6 @@ static struct sk_buff *__hot contig_fd_t
- 	 * warn us that the frame length is larger than the truesize. We
- 	 * bypass the warning.
- 	 */
--#ifndef CONFIG_PPC
--	/* We do not support Jumbo frames on LS1043 and thus we edit
--	 * the skb truesize only when the 4k errata is not present.
--	 */
--	if (likely(!dpaa_errata_a010022))
--#endif
- 	skb->truesize = SKB_TRUESIZE(dpa_fd_length(fd));
- #endif
- 
-@@ -809,35 +803,31 @@ static struct sk_buff *a010022_realign_s
- {
- 	int trans_offset = skb_transport_offset(skb);
- 	int net_offset = skb_network_offset(skb);
-+	int nsize, headroom, npage_order;
- 	struct sk_buff *nskb = NULL;
--	int nsize, headroom;
- 	struct page *npage;
- 	void *npage_addr;
- 
--	/* Guarantee the minimum required headroom */
--	if (skb_headroom(skb) >= priv->tx_headroom)
--		headroom = skb_headroom(skb);
--	else
--		headroom = priv->tx_headroom;
-+	/* The headroom needs to accommodate our private data (64 bytes) but
-+	 * we reserve 256 bytes instead to guarantee 256 data alignment.
-+	 */
-+	headroom = DPAA_A010022_HEADROOM;
-+
-+	/* For the new skb we only need the old one's data (both non-paged and
-+	 * paged). We can skip the old tailroom.
-+	 */
-+	nsize = headroom + skb->len +
-+		SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
- 
--	npage = alloc_page(GFP_ATOMIC);
-+	/* Reserve enough memory to accommodate Jumbo frames */
-+	npage_order = (nsize - 1) / PAGE_SIZE;
-+	npage = alloc_pages(GFP_ATOMIC | __GFP_COMP, npage_order);
- 	if (unlikely(!npage)) {
- 		WARN_ONCE(1, "Memory allocation failure\n");
- 		return NULL;
- 	}
- 	npage_addr = page_address(npage);
- 
--	/* For the new skb we only need the old one's data (both non-paged and
--	 * paged) and a headroom large enough to fit our private info. We can
--	 * skip the old tailroom.
--	 *
--	 * Make sure the new linearized buffer will not exceed a page's size.
--	 */
--	nsize = headroom + skb->len +
--		SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
--	if (unlikely(nsize > 4096))
--		goto err;
--
- 	nskb = build_skb(npage_addr, nsize);
- 	if (unlikely(!nskb))
- 		goto err;
-@@ -846,7 +836,7 @@ static struct sk_buff *a010022_realign_s
- 	 * alignment.
- 	 * Code borrowed and adapted from skb_copy().
- 	 */
--	skb_reserve(nskb, priv->tx_headroom);
-+	skb_reserve(nskb, headroom);
- 	skb_put(nskb, skb->len);
- 	if (skb_copy_bits(skb, 0, nskb->data, skb->len)) {
- 		WARN_ONCE(1, "skb parsing failure\n");
diff --git a/target/linux/layerscape/patches-5.4/701-net-0075-sdk_dpaa-reserve-256-bytes-for-the-SGT-on-TX.patch b/target/linux/layerscape/patches-5.4/701-net-0075-sdk_dpaa-reserve-256-bytes-for-the-SGT-on-TX.patch
deleted file mode 100644
index 2056276472..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0075-sdk_dpaa-reserve-256-bytes-for-the-SGT-on-TX.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 29757ae2e4a0e8e1e816c9eeef59121908320669 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 20 Jun 2018 18:00:42 +0300
-Subject: [PATCH] sdk_dpaa: reserve 256 bytes for the SGT on TX
-
-The FMan reads 256 bytes from the start of the SGT regardless of its
-size. We reserve the same amount of memory on TX to access.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.h |  6 ++++--
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c     | 10 +++++++---
- 2 files changed, 11 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.h
-@@ -55,10 +55,12 @@
- 	fm_set_##type##_port_params(port, &param); \
- }
- 
-+/* The SGT needs to be 256 bytes long. Even if the table has only one entry,
-+ * the FMan will read 256 bytes from its start.
-+ */
-+#define DPA_SGT_SIZE 256
- #define DPA_SGT_MAX_ENTRIES 16 /* maximum number of entries in SG Table */
- 
--#define DPA_SGT_ENTRIES_THRESHOLD	DPA_SGT_MAX_ENTRIES
--
- #define DPA_BUFF_RELEASE_MAX 8 /* maximum number of buffers released at once */
- 
- #define DPA_RX_PCD_HI_PRIO_FQ_INIT_FAIL(dpa_fq, _errno) \
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -246,8 +246,8 @@ struct sk_buff *_dpa_cleanup_tx_fd(const
- 
- 	if (unlikely(fd->format == qm_fd_sg)) {
- 		nr_frags = skb_shinfo(skb)->nr_frags;
--		dma_unmap_single(dpa_bp->dev, addr, dpa_fd_offset(fd) +
--				 sizeof(struct qm_sg_entry) * (1 + nr_frags),
-+		dma_unmap_single(dpa_bp->dev, addr,
-+				 dpa_fd_offset(fd) + DPA_SGT_SIZE,
- 				 dma_dir);
- 
- 		/* The sgt buffer has been allocated with netdev_alloc_frag(),
-@@ -896,7 +896,11 @@ int __hot skb_to_sg_fd(struct dpa_priv_s
- 	nr_frags = skb_shinfo(skb)->nr_frags;
- 	fd->format = qm_fd_sg;
- 
--	sgt_size = sizeof(struct qm_sg_entry) * (1 + nr_frags);
-+	/* The FMan reads 256 bytes from the start of the SGT regardless of
-+	 * its size. In accordance, we reserve the same amount of memory as
-+	 * well.
-+	 */
-+	sgt_size = DPA_SGT_SIZE;
- 
- 	/* Get a page frag to store the SGTable, or a full page if the errata
- 	 * is in place and we need to avoid crossing a 4k boundary.
diff --git a/target/linux/layerscape/patches-5.4/701-net-0076-fsl_qbman-usdpaa-change-to-debug-print-in-interrupt-.patch b/target/linux/layerscape/patches-5.4/701-net-0076-fsl_qbman-usdpaa-change-to-debug-print-in-interrupt-.patch
deleted file mode 100644
index 71c327b09a..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0076-fsl_qbman-usdpaa-change-to-debug-print-in-interrupt-.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 9be590a85edd0298fb9ad21a26d849ccbadb7530 Mon Sep 17 00:00:00 2001
-From: Nipun Gupta <nipun.gupta@nxp.com>
-Date: Wed, 8 Aug 2018 13:04:18 +0530
-Subject: [PATCH] fsl_qbman/usdpaa: change to debug print in interrupt handler
-
-Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
----
- drivers/staging/fsl_qbman/fsl_usdpaa_irq.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/staging/fsl_qbman/fsl_usdpaa_irq.c
-+++ b/drivers/staging/fsl_qbman/fsl_usdpaa_irq.c
-@@ -102,7 +102,7 @@ static irqreturn_t usdpaa_irq_handler(in
- 	/* Set the inhibit register.  This will be reenabled
- 	   once the USDPAA code handles the IRQ */
- 	out_be32(ctx->inhibit_addr, 0x1);
--	pr_info("Inhibit at %p count %d", ctx->inhibit_addr, ctx->irq_count);
-+	pr_debug("Inhibit at %p count %d", ctx->inhibit_addr, ctx->irq_count);
- 	return IRQ_HANDLED;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0077-staging-fsl_qbman-Consume-all-frames-in-DQRR-during-.patch b/target/linux/layerscape/patches-5.4/701-net-0077-staging-fsl_qbman-Consume-all-frames-in-DQRR-during-.patch
deleted file mode 100644
index ec79adc56e..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0077-staging-fsl_qbman-Consume-all-frames-in-DQRR-during-.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 9b4ae951eeabc09fda80e446434ef8f03849522e Mon Sep 17 00:00:00 2001
-From: Roy Pledge <roy.pledge@nxp.com>
-Date: Fri, 22 Jun 2018 15:47:07 -0400
-Subject: [PATCH] staging/fsl_qbman: Consume all frames in DQRR during init
-
-The qm_dqrr_cdc_consume_n() function takes a bitmask, not an index.
-
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
----
- drivers/staging/fsl_qbman/qman_low.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/staging/fsl_qbman/qman_low.h
-+++ b/drivers/staging/fsl_qbman/qman_low.h
-@@ -658,7 +658,7 @@ static inline int qm_dqrr_init(struct qm
- 			qm_dqrr_cce_consume(portal, dqrr->fill);
- 			break;
- 		case qm_dqrr_cdc:
--			qm_dqrr_cdc_consume_n(portal, (QM_DQRR_SIZE - 1));
-+			qm_dqrr_cdc_consume_n(portal, (1<<QM_DQRR_SIZE) - 1);
- 			break;
- 		default:
- 			DPA_ASSERT(0);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0078-staging-fsl_qbman-Recalcuate-cursor-after-consuming-.patch b/target/linux/layerscape/patches-5.4/701-net-0078-staging-fsl_qbman-Recalcuate-cursor-after-consuming-.patch
deleted file mode 100644
index cbb8efa3e0..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0078-staging-fsl_qbman-Recalcuate-cursor-after-consuming-.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From c9d41c728cb9fc5c100030d39d81be3d8e0b26d7 Mon Sep 17 00:00:00 2001
-From: Roy Pledge <roy.pledge@nxp.com>
-Date: Wed, 8 Aug 2018 17:13:48 -0400
-Subject: [PATCH] staging/fsl_qbman: Recalcuate cursor after consuming ring
-
-If the dqrr_init() function consumes frames during init
-the cursor needs to be updated before anything starts
-to use the ring.
-
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
----
- drivers/staging/fsl_qbman/qman_low.h | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/staging/fsl_qbman/qman_low.h
-+++ b/drivers/staging/fsl_qbman/qman_low.h
-@@ -682,6 +682,9 @@ static inline int qm_dqrr_init(struct qm
- 		(0 ? 0x10 : 0);				/* Ignore SP */
- 	qm_out(CFG, cfg);
- 	qm_dqrr_set_maxfill(portal, max_fill);
-+
-+	/* Recalculate cursor as we may have consumed frames */
-+	dqrr->cursor = dqrr->ring + dqrr->ci;
- 	return 0;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0079-fmd-use-fsl-fman-ptp-timer-compatible-for-ptp-probe.patch b/target/linux/layerscape/patches-5.4/701-net-0079-fmd-use-fsl-fman-ptp-timer-compatible-for-ptp-probe.patch
deleted file mode 100644
index 2748089ee7..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0079-fmd-use-fsl-fman-ptp-timer-compatible-for-ptp-probe.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 3fa6171fbe38125b2841d7947e976b172db47c45 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Wed, 5 Sep 2018 14:50:10 +0800
-Subject: [PATCH] fmd: use "fsl,fman-ptp-timer" compatible for ptp probe
-
-Current ptp compatible "fsl,fman-rtc" used for ptp probe
-in fmd driver couldn't involve PowerPC DPAA FMan PTP timer.
-Let's use "fsl,fman-ptp-timer" instead to support DPAA FMan
-PTP timer of both ARM and PowerPC.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-@@ -687,9 +687,9 @@ static t_LnxWrpFmDev * ReadFmDevTreeNode
-     if (WARN_ON(strlen("ptp-timer") >= sizeof(ids[0].name)))
-         return NULL;
-     strcpy(ids[0].name, "ptp-timer");
--    if (WARN_ON(strlen("fsl,fman-rtc") >= sizeof(ids[0].compatible)))
-+    if (WARN_ON(strlen("fsl,fman-ptp-timer") >= sizeof(ids[0].compatible)))
-         return NULL;
--    strcpy(ids[0].compatible, "fsl,fman-rtc");
-+    strcpy(ids[0].compatible, "fsl,fman-ptp-timer");
-     for_each_child_of_node(fm_node, dev_node) {
-         if (likely(of_match_node(ids, dev_node) != NULL)) {
-             _errno = of_address_to_resource(dev_node, 0, &res);
-@@ -920,7 +920,7 @@ static t_Error ConfigureFmDev(t_LnxWrpFm
- 
-     if (p_LnxWrpFmDev->fmRtcPhysBaseAddr)
-     {
--        dev_res = __devm_request_region(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->res, p_LnxWrpFmDev->fmRtcPhysBaseAddr, p_LnxWrpFmDev->fmRtcMemSize, "fman-rtc");
-+        dev_res = __devm_request_region(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->res, p_LnxWrpFmDev->fmRtcPhysBaseAddr, p_LnxWrpFmDev->fmRtcMemSize, "fman-ptp-timer");
-         if (unlikely(dev_res == NULL))
-             RETURN_ERROR(MAJOR, E_INVALID_STATE, ("__devm_request_region() failed"));
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0080-sdk_dpaa-store-the-skb-backpointer-in-the-skb-headro.patch b/target/linux/layerscape/patches-5.4/701-net-0080-sdk_dpaa-store-the-skb-backpointer-in-the-skb-headro.patch
deleted file mode 100644
index 12e5d15795..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0080-sdk_dpaa-store-the-skb-backpointer-in-the-skb-headro.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 1f00fa355829b510beb900ce1136f40802e6076e Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 10 Sep 2018 14:31:05 +0300
-Subject: [PATCH] sdk_dpaa: store the skb backpointer in the skb headroom
-
-The skb backpointer is stored right before the FMan buffer, in order to
-avoid overwriting. The memory area storing the backpointer was outside of
-the skb. This made it hard to guarantee its size.
-
-This patch changes the layout of the skb at buffer seed time: the area
-reserved for storing the skb backpointer is part of the skb's headroom.
-This makes it easier to track if the backpointer can be safely stored
-when recycling the buffer.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c  | 33 ++++++++++++++++------
- 1 file changed, 24 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -82,8 +82,8 @@ static void dpa_bp_recycle_frag(struct d
- 
- static int _dpa_bp_add_8_bufs(const struct dpa_bp *dpa_bp)
- {
-+	void *new_buf, *fman_buf;
- 	struct bm_buffer bmb[8];
--	void *new_buf;
- 	dma_addr_t addr;
- 	uint8_t i;
- 	struct device *dev = dpa_bp->dev;
-@@ -113,21 +113,37 @@ static int _dpa_bp_add_8_bufs(const stru
- 
- 		if (unlikely(!new_buf))
- 			goto netdev_alloc_failed;
--		new_buf = PTR_ALIGN(new_buf + SMP_CACHE_BYTES, SMP_CACHE_BYTES);
-+		new_buf = PTR_ALIGN(new_buf, SMP_CACHE_BYTES);
- 
--		skb = build_skb(new_buf, DPA_SKB_SIZE(dpa_bp->size) +
--			SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
-+		/* Apart from the buffer that will be used by the FMan, the
-+		 * skb also guarantees enough space to hold the backpointer
-+		 * in the headroom and the shared info at the end.
-+		 */
-+		skb = build_skb(new_buf,
-+				SMP_CACHE_BYTES + DPA_SKB_SIZE(dpa_bp->size) +
-+				SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
- 		if (unlikely(!skb)) {
- 			put_page(virt_to_head_page(new_buf));
- 			goto build_skb_failed;
- 		}
- 
--		/* Store the skb back-pointer before the start of the buffer.
--		 * Otherwise it will be overwritten by the FMan.
-+		/* Reserve SMP_CACHE_BYTES in the skb's headroom to store the
-+		 * backpointer. This area will not be synced to, or
-+		 * overwritten by, the FMan.
-+		 */
-+		skb_reserve(skb, SMP_CACHE_BYTES);
-+
-+		/* We don't sync the first SMP_CACHE_BYTES of the buffer to
-+		 * the FMan. The skb backpointer is stored at the end of the
-+		 * reserved headroom. Otherwise it will be overwritten by the
-+		 * FMan.
-+		 * The buffer synced with the FMan starts right after the
-+		 * reserved headroom.
- 		 */
--		DPA_WRITE_SKB_PTR(skb, skbh, new_buf, -1);
-+		fman_buf = new_buf + SMP_CACHE_BYTES;
-+		DPA_WRITE_SKB_PTR(skb, skbh, fman_buf, -1);
- 
--		addr = dma_map_single(dev, new_buf,
-+		addr = dma_map_single(dev, fman_buf,
- 				dpa_bp->size, DMA_BIDIRECTIONAL);
- 		if (unlikely(dma_mapping_error(dev, addr)))
- 			goto dma_map_failed;
-@@ -477,7 +493,6 @@ static struct sk_buff *__hot sg_fd_to_sk
- 				 DMA_BIDIRECTIONAL);
- 		if (i == 0) {
- 			DPA_READ_SKB_PTR(skb, skbh, sg_vaddr, -1);
--			DPA_BUG_ON(skb->head != sg_vaddr);
- #ifdef CONFIG_FSL_DPAA_1588
- 			if (priv->tsu && priv->tsu->valid &&
- 			    priv->tsu->hwts_rx_en_ioctl)
diff --git a/target/linux/layerscape/patches-5.4/701-net-0081-sdk_dpaa-ls1043a-errata-align-skb_shinfo.patch b/target/linux/layerscape/patches-5.4/701-net-0081-sdk_dpaa-ls1043a-errata-align-skb_shinfo.patch
deleted file mode 100644
index 3c224c62a4..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0081-sdk_dpaa-ls1043a-errata-align-skb_shinfo.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 7c96998ebc8cc9c71216b80de3f77114f29b148a Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 17 Sep 2018 12:39:24 +0300
-Subject: [PATCH] sdk_dpaa: ls1043a errata: align skb_shinfo
-
-Make sure the skb shared info is cache-line aligned when realigning
-egress frames.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -830,8 +830,10 @@ static struct sk_buff *a010022_realign_s
- 
- 	/* For the new skb we only need the old one's data (both non-paged and
- 	 * paged). We can skip the old tailroom.
-+	 *
-+	 * Make sure the skb_shinfo is cache-line aligned.
- 	 */
--	nsize = headroom + skb->len +
-+	nsize = SMP_CACHE_BYTES + DPA_SKB_SIZE(headroom + skb->len) +
- 		SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
- 
- 	/* Reserve enough memory to accommodate Jumbo frames */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0082-sdk_dpaa-ls1043a-errata-move-comment.patch b/target/linux/layerscape/patches-5.4/701-net-0082-sdk_dpaa-ls1043a-errata-move-comment.patch
deleted file mode 100644
index 05875d2e5b..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0082-sdk_dpaa-ls1043a-errata-move-comment.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 182afda3f2537022ac2e0b7f421977ba96ce864e Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 17 Sep 2018 12:44:51 +0300
-Subject: [PATCH] sdk_dpaa: ls1043a errata: move comment
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h    | 3 +++
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 3 ---
- 2 files changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-@@ -682,6 +682,9 @@ extern bool dpaa_errata_a010022; /* SoC
- #define HAS_DMA_ISSUE(start, size) \
- 	(((uintptr_t)(start) + (size)) > \
- 	 (((uintptr_t)(start) + 0x1000) & ~0xFFF))
-+/* The headroom needs to accommodate our private data (64 bytes) but
-+ * we reserve 256 bytes instead to guarantee 256 data alignment.
-+ */
- #define DPAA_A010022_HEADROOM	256
- #endif  /* !CONFIG_PPC */
- 
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -823,9 +823,6 @@ static struct sk_buff *a010022_realign_s
- 	struct page *npage;
- 	void *npage_addr;
- 
--	/* The headroom needs to accommodate our private data (64 bytes) but
--	 * we reserve 256 bytes instead to guarantee 256 data alignment.
--	 */
- 	headroom = DPAA_A010022_HEADROOM;
- 
- 	/* For the new skb we only need the old one's data (both non-paged and
diff --git a/target/linux/layerscape/patches-5.4/701-net-0083-sdk_dpaa-ceetm-lower-the-default-congestion-threshol.patch b/target/linux/layerscape/patches-5.4/701-net-0083-sdk_dpaa-ceetm-lower-the-default-congestion-threshol.patch
deleted file mode 100644
index 81881fa717..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0083-sdk_dpaa-ceetm-lower-the-default-congestion-threshol.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From c18056f0a2648457cdaf06450addd217091f4bea Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 2 Oct 2018 16:49:28 +0300
-Subject: [PATCH] sdk_dpaa: ceetm: lower the default congestion thresholds
-
-The congestion thresholds need to be set in such a way that:
-    a) the threshold is high enough so that frames aren't dropped
-    unnecessarily
-    b) the threshold is low enough so that the latency isn't too big
-
-The current thresholds are set too high. In forwarding scenarios, the
-latency is too large and frames are dropped on ingress due to a lack of
-buffers.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/Kconfig | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/Kconfig
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/Kconfig
-@@ -24,7 +24,7 @@ config FSL_DPAA_CEETM_CCS_THRESHOLD_1G
- 	hex "CEETM egress congestion threshold on 1G ports"
- 	depends on FSL_DPAA_CEETM
- 	range 0x1000 0x10000000
--	default "0x000a0000"
-+	default "0x00005000"
- 	help
- 	  The size in bytes of the CEETM egress Class Congestion State threshold on 1G ports.
- 	  The threshold needs to be configured keeping in mind the following factors:
-@@ -38,7 +38,7 @@ config FSL_DPAA_CEETM_CCS_THRESHOLD_10G
- 	hex "CEETM egress congestion threshold on 10G ports"
- 	depends on FSL_DPAA_CEETM
- 	range 0x1000 0x20000000
--	default "0x00640000"
-+	default "0x00032000"
- 	help
- 	  The size in bytes of the CEETM egress Class Congestion State threshold on 10G ports.
- 	  See FSL_DPAA_CEETM_CCS_THRESHOLD_1G for details.
diff --git a/target/linux/layerscape/patches-5.4/701-net-0084-staging-fsl_qbman-remove-bootmem-header.patch b/target/linux/layerscape/patches-5.4/701-net-0084-staging-fsl_qbman-remove-bootmem-header.patch
deleted file mode 100644
index a7e1afc865..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0084-staging-fsl_qbman-remove-bootmem-header.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 1e42763e2e015dd98ee0fbfe30de4c0124251cb1 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 9 Oct 2018 17:49:07 +0300
-Subject: [PATCH] staging/fsl_qbman: remove bootmem header
-
-The bootmem allocator was removed in [1]. The memblock allocator is
-supposed to be used directly instead. We already include it.
-
-[1] afd505b ("mm: remove include/linux/bootmem.h")
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/staging/fsl_qbman/dpa_sys.h | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/staging/fsl_qbman/dpa_sys.h
-+++ b/drivers/staging/fsl_qbman/dpa_sys.h
-@@ -36,7 +36,6 @@
- #include <linux/errno.h>
- #include <linux/io.h>
- #include <linux/dma-mapping.h>
--#include <linux/bootmem.h>
- #include <linux/slab.h>
- #include <linux/module.h>
- #include <linux/init.h>
diff --git a/target/linux/layerscape/patches-5.4/701-net-0085-staging-fsl_qbman-stop-using-current_kernel_time.patch b/target/linux/layerscape/patches-5.4/701-net-0085-staging-fsl_qbman-stop-using-current_kernel_time.patch
deleted file mode 100644
index 71f16e9e60..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0085-staging-fsl_qbman-stop-using-current_kernel_time.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 91c2f372e3f70ab5b5afff5af60348fd5656d739 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 10 Oct 2018 17:30:18 +0300
-Subject: [PATCH] staging/fsl_qbman: stop using current_kernel_time()
-
-The current_kernel_time() call was removed in [1] in order to avoid
-overflows in 2038. Use ktime_get_coarse_real_ts64() instead.
-
-[1] 9765164 ("y2038: remove unused time interfaces")
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/staging/fsl_qbman/qbman_driver.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/staging/fsl_qbman/qbman_driver.c
-+++ b/drivers/staging/fsl_qbman/qbman_driver.c
-@@ -57,7 +57,10 @@ static __init int qbman_init(void)
- 		};
- 		struct qm_mcr_queryfq_np np;
- 		int err, retry = CONFIG_FSL_QMAN_INIT_TIMEOUT;
--		struct timespec nowts, diffts, startts = current_kernel_time();
-+		struct timespec64 nowts, diffts, startts;
-+
-+		ktime_get_coarse_real_ts64(&startts);
-+
- 		/* Loop while querying given fqid succeeds or time out */
- 		while (1) {
- 			err = qman_query_fq_np(&fq, &np);
-@@ -68,8 +71,8 @@ static __init int qbman_init(void)
- 				pr_err("QMan: I/O error, continuing anyway\n");
- 				break;
- 			}
--			nowts = current_kernel_time();
--			diffts = timespec_sub(nowts, startts);
-+			ktime_get_coarse_real_ts64(&nowts);
-+			diffts = timespec64_sub(nowts, startts);
- 			if (diffts.tv_sec > 0) {
- 				if (!retry--) {
- 					pr_err("QMan: time out, control-plane"
diff --git a/target/linux/layerscape/patches-5.4/701-net-0086-sdk_dpaa-ceetm-avoid-double-frees-on-error-paths.patch b/target/linux/layerscape/patches-5.4/701-net-0086-sdk_dpaa-ceetm-avoid-double-frees-on-error-paths.patch
deleted file mode 100644
index efab833cf7..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0086-sdk_dpaa-ceetm-avoid-double-frees-on-error-paths.patch
+++ /dev/null
@@ -1,334 +0,0 @@
-From 1ffba0c4d1122688268e59832a5e2bbc0917cac7 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 3 Oct 2018 16:37:06 +0300
-Subject: [PATCH] sdk_dpaa: ceetm: avoid double frees on error paths
-
-The stack calls the destroy() callback when a qdisc init() fails.
-We stop calling it ourselves and trust the stack do the cleanup.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c   | 94 ++++++++--------------
- 1 file changed, 34 insertions(+), 60 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -687,16 +687,13 @@ static int ceetm_init_root(struct Qdisc
- 
- 	/* Validate inputs */
- 	if (sch->parent != TC_H_ROOT) {
--		pr_err("CEETM: a root ceetm qdisc can not be attached to a class\n");
--		tcf_block_put(priv->block);
--		qdisc_class_hash_destroy(&priv->clhash);
-+		pr_err("CEETM: a root ceetm qdisc must be root\n");
- 		return -EINVAL;
- 	}
- 
- 	if (!mac_dev) {
- 		pr_err("CEETM: the interface is lacking a mac\n");
--		err = -EINVAL;
--		goto err_init_root;
-+		return -EINVAL;
- 	}
- 
- 	/* Pre-allocate underlying pfifo qdiscs.
-@@ -713,8 +710,7 @@ static int ceetm_init_root(struct Qdisc
- 				    sizeof(priv->root.qdiscs[0]),
- 				    GFP_KERNEL);
- 	if (!priv->root.qdiscs) {
--		err = -ENOMEM;
--		goto err_init_root;
-+		return -ENOMEM;
- 	}
- 
- 	for (i = 0; i < dev->num_tx_queues; i++) {
-@@ -724,10 +720,8 @@ static int ceetm_init_root(struct Qdisc
- 
- 		qdisc = qdisc_create_dflt(dev_queue, &pfifo_qdisc_ops,
- 					  parent_id, extack);
--		if (!qdisc) {
--			err = -ENOMEM;
--			goto err_init_root;
--		}
-+		if (!qdisc)
-+			return -ENOMEM;
- 
- 		priv->root.qdiscs[i] = qdisc;
- 		qdisc->flags |= TCQ_F_ONETXQUEUE;
-@@ -739,8 +733,7 @@ static int ceetm_init_root(struct Qdisc
- 	if (!priv->root.qstats) {
- 		pr_err(KBUILD_BASENAME " : %s : alloc_percpu() failed\n",
- 		       __func__);
--		err = -ENOMEM;
--		goto err_init_root;
-+		return -ENOMEM;
- 	}
- 
- 	priv->shaped = qopt->shaped;
-@@ -754,7 +747,7 @@ static int ceetm_init_root(struct Qdisc
- 	if (err) {
- 		pr_err(KBUILD_BASENAME " : %s : failed to claim the SP\n",
- 		       __func__);
--		goto err_init_root;
-+		return err;
- 	}
- 
- 	priv->root.sp = sp;
-@@ -766,7 +759,7 @@ static int ceetm_init_root(struct Qdisc
- 	if (err) {
- 		pr_err(KBUILD_BASENAME " : %s : failed to claim the LNI\n",
- 		       __func__);
--		goto err_init_root;
-+		return err;
- 	}
- 
- 	priv->root.lni = lni;
-@@ -775,7 +768,7 @@ static int ceetm_init_root(struct Qdisc
- 	if (err) {
- 		pr_err(KBUILD_BASENAME " : %s : failed to link the SP and LNI\n",
- 		       __func__);
--		goto err_init_root;
-+		return err;
- 	}
- 
- 	lni->sp = sp;
-@@ -786,7 +779,7 @@ static int ceetm_init_root(struct Qdisc
- 		if (err) {
- 			pr_err(KBUILD_BASENAME " : %s : failed to configure the LNI shaper\n",
- 			       __func__);
--			goto err_init_root;
-+			return err;
- 		}
- 
- 		bps = priv->root.rate << 3; /* Bps -> bps */
-@@ -794,7 +787,7 @@ static int ceetm_init_root(struct Qdisc
- 		if (err) {
- 			pr_err(KBUILD_BASENAME " : %s : failed to configure the LNI shaper\n",
- 			       __func__);
--			goto err_init_root;
-+			return err;
- 		}
- 
- 		bps = priv->root.ceil << 3; /* Bps -> bps */
-@@ -802,7 +795,7 @@ static int ceetm_init_root(struct Qdisc
- 		if (err) {
- 			pr_err(KBUILD_BASENAME " : %s : failed to configure the LNI shaper\n",
- 			       __func__);
--			goto err_init_root;
-+			return err;
- 		}
- 	}
- 
-@@ -810,10 +803,6 @@ static int ceetm_init_root(struct Qdisc
- 
- 	dpa_enable_ceetm(dev);
- 	return 0;
--
--err_init_root:
--	ceetm_destroy(sch);
--	return err;
- }
- 
- /* Configure a prio ceetm qdisc */
-@@ -830,15 +819,13 @@ static int ceetm_init_prio(struct Qdisc
- 
- 	if (sch->parent == TC_H_ROOT) {
- 		pr_err("CEETM: a prio ceetm qdisc can not be root\n");
--		err = -EINVAL;
--		goto err_init_prio;
-+		return -EINVAL;
- 	}
- 
- 	parent_qdisc = qdisc_lookup(dev, TC_H_MAJ(sch->parent));
- 	if (strcmp(parent_qdisc->ops->id, ceetm_qdisc_ops.id)) {
- 		pr_err("CEETM: a ceetm qdisc can not be attached to other qdisc/class types\n");
--		err = -EINVAL;
--		goto err_init_prio;
-+		return -EINVAL;
- 	}
- 
- 	/* Obtain the parent root ceetm_class */
-@@ -846,8 +833,7 @@ static int ceetm_init_prio(struct Qdisc
- 
- 	if (!parent_cl || parent_cl->type != CEETM_ROOT) {
- 		pr_err("CEETM: a prio ceetm qdiscs can be added only under a root ceetm class\n");
--		err = -EINVAL;
--		goto err_init_prio;
-+		return -EINVAL;
- 	}
- 
- 	priv->prio.parent = parent_cl;
-@@ -863,8 +849,7 @@ static int ceetm_init_prio(struct Qdisc
- 		if (!child_cl) {
- 			pr_err(KBUILD_BASENAME " : %s : kzalloc() failed\n",
- 			       __func__);
--			err = -ENOMEM;
--			goto err_init_prio;
-+			return -ENOMEM;
- 		}
- 
- 		child_cl->prio.cstats = alloc_percpu(struct ceetm_class_stats);
-@@ -907,8 +892,7 @@ static int ceetm_init_prio(struct Qdisc
- 
- err_init_prio_cls:
- 	ceetm_cls_destroy(sch, child_cl);
--err_init_prio:
--	ceetm_destroy(sch);
-+	/* Note: ceetm_destroy() will be called by our caller */
- 	return err;
- }
- 
-@@ -928,16 +912,14 @@ static int ceetm_init_wbfs(struct Qdisc
- 	/* Validate inputs */
- 	if (sch->parent == TC_H_ROOT) {
- 		pr_err("CEETM: a wbfs ceetm qdiscs can not be root\n");
--		err = -EINVAL;
--		goto err_init_wbfs;
-+		return -EINVAL;
- 	}
- 
- 	/* Obtain the parent prio ceetm qdisc */
- 	parent_qdisc = qdisc_lookup(dev, TC_H_MAJ(sch->parent));
- 	if (strcmp(parent_qdisc->ops->id, ceetm_qdisc_ops.id)) {
- 		pr_err("CEETM: a ceetm qdisc can not be attached to other qdisc/class types\n");
--		err = -EINVAL;
--		goto err_init_wbfs;
-+		return -EINVAL;
- 	}
- 
- 	/* Obtain the parent prio ceetm class */
-@@ -946,28 +928,24 @@ static int ceetm_init_wbfs(struct Qdisc
- 
- 	if (!parent_cl || parent_cl->type != CEETM_PRIO) {
- 		pr_err("CEETM: a wbfs ceetm qdiscs can be added only under a prio ceetm class\n");
--		err = -EINVAL;
--		goto err_init_wbfs;
-+		return -EINVAL;
- 	}
- 
- 	if (!qopt->qcount || !qopt->qweight[0]) {
- 		pr_err("CEETM: qcount and qweight are mandatory for a wbfs ceetm qdisc\n");
--		err = -EINVAL;
--		goto err_init_wbfs;
-+		return -EINVAL;
- 	}
- 
- 	priv->shaped = parent_cl->shaped;
- 
- 	if (!priv->shaped && (qopt->cr || qopt->er)) {
- 		pr_err("CEETM: CR/ER can be enabled only for shaped wbfs ceetm qdiscs\n");
--		err = -EINVAL;
--		goto err_init_wbfs;
-+		return -EINVAL;
- 	}
- 
- 	if (priv->shaped && !(qopt->cr || qopt->er)) {
- 		pr_err("CEETM: either CR or ER must be enabled for shaped wbfs ceetm qdiscs\n");
--		err = -EINVAL;
--		goto err_init_wbfs;
-+		return -EINVAL;
- 	}
- 
- 	/* Obtain the parent root ceetm class */
-@@ -975,16 +953,14 @@ static int ceetm_init_wbfs(struct Qdisc
- 	if ((root_cl->root.wbfs_grp_a && root_cl->root.wbfs_grp_b) ||
- 	    root_cl->root.wbfs_grp_large) {
- 		pr_err("CEETM: no more wbfs classes are available\n");
--		err = -EINVAL;
--		goto err_init_wbfs;
-+		return -EINVAL;
- 	}
- 
- 	if ((root_cl->root.wbfs_grp_a || root_cl->root.wbfs_grp_b) &&
- 	    qopt->qcount == CEETM_MAX_WBFS_QCOUNT) {
- 		pr_err("CEETM: only %d wbfs classes are available\n",
- 		       CEETM_MIN_WBFS_QCOUNT);
--		err = -EINVAL;
--		goto err_init_wbfs;
-+		return -EINVAL;
- 	}
- 
- 	priv->wbfs.parent = parent_cl;
-@@ -1013,7 +989,7 @@ static int ceetm_init_wbfs(struct Qdisc
- 		if (err) {
- 			pr_err(KBUILD_BASENAME " : %s : failed to get group details\n",
- 			       __func__);
--			goto err_init_wbfs;
-+			return err;
- 		}
- 
- 		small_group = true;
-@@ -1031,7 +1007,7 @@ static int ceetm_init_wbfs(struct Qdisc
- 		if (err) {
- 			pr_err(KBUILD_BASENAME " : %s : failed to get group details\n",
- 			       __func__);
--			goto err_init_wbfs;
-+			return err;
- 		}
- 
- 		small_group = true;
-@@ -1044,7 +1020,7 @@ static int ceetm_init_wbfs(struct Qdisc
- 	err = qman_ceetm_channel_set_group(priv->wbfs.ch, small_group, prio_a,
- 					   prio_b);
- 	if (err)
--		goto err_init_wbfs;
-+		return err;
- 
- 	if (priv->shaped) {
- 		err = qman_ceetm_channel_set_group_cr_eligibility(priv->wbfs.ch,
-@@ -1053,7 +1029,7 @@ static int ceetm_init_wbfs(struct Qdisc
- 		if (err) {
- 			pr_err(KBUILD_BASENAME " : %s : failed to set group CR eligibility\n",
- 			       __func__);
--			goto err_init_wbfs;
-+			return err;
- 		}
- 
- 		err = qman_ceetm_channel_set_group_er_eligibility(priv->wbfs.ch,
-@@ -1062,7 +1038,7 @@ static int ceetm_init_wbfs(struct Qdisc
- 		if (err) {
- 			pr_err(KBUILD_BASENAME " : %s : failed to set group ER eligibility\n",
- 			       __func__);
--			goto err_init_wbfs;
-+			return err;
- 		}
- 	}
- 
-@@ -1072,8 +1048,7 @@ static int ceetm_init_wbfs(struct Qdisc
- 		if (!child_cl) {
- 			pr_err(KBUILD_BASENAME " : %s : kzalloc() failed\n",
- 			       __func__);
--			err = -ENOMEM;
--			goto err_init_wbfs;
-+			return -ENOMEM;
- 		}
- 
- 		child_cl->wbfs.cstats = alloc_percpu(struct ceetm_class_stats);
-@@ -1130,8 +1105,7 @@ static int ceetm_init_wbfs(struct Qdisc
- 
- err_init_wbfs_cls:
- 	ceetm_cls_destroy(sch, child_cl);
--err_init_wbfs:
--	ceetm_destroy(sch);
-+	/* Note: ceetm_destroy() will be called by our caller */
- 	return err;
- }
- 
-@@ -1202,7 +1176,7 @@ static int ceetm_init(struct Qdisc *sch,
- 		break;
- 	default:
- 		pr_err(KBUILD_BASENAME " : %s : invalid qdisc\n", __func__);
--		ceetm_destroy(sch);
-+		/* Note: ceetm_destroy() will be called by our caller */
- 		ret = -EINVAL;
- 	}
- 
-@@ -1549,7 +1523,7 @@ static int ceetm_cls_change(struct Qdisc
- 	}
- 
- 	if (!cl && priv->type != CEETM_ROOT) {
--		pr_err("CEETM: only root ceetm classes can be attached to the root ceetm qdisc\n");
-+		pr_err("CEETM: root ceetm classes can be attached to the root ceetm qdisc only\n");
- 		return -EINVAL;
- 	}
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0087-sdk_dpaa-ceetm-rename-qdisc_destroy-to-qdisc_put.patch b/target/linux/layerscape/patches-5.4/701-net-0087-sdk_dpaa-ceetm-rename-qdisc_destroy-to-qdisc_put.patch
deleted file mode 100644
index 745952ba87..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0087-sdk_dpaa-ceetm-rename-qdisc_destroy-to-qdisc_put.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From b8f8c14491160043dd880d1e62c01903402352b2 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 24 Oct 2018 13:35:16 +0300
-Subject: [PATCH] sdk_dpaa: ceetm: rename qdisc_destroy() to qdisc_put()
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -432,7 +432,7 @@ static void ceetm_cls_destroy(struct Qdi
- 	switch (cl->type) {
- 	case CEETM_ROOT:
- 		if (cl->root.child) {
--			qdisc_destroy(cl->root.child);
-+			qdisc_put(cl->root.child);
- 			cl->root.child = NULL;
- 		}
- 
-@@ -445,7 +445,7 @@ static void ceetm_cls_destroy(struct Qdi
- 
- 	case CEETM_PRIO:
- 		if (cl->prio.child) {
--			qdisc_destroy(cl->prio.child);
-+			qdisc_put(cl->prio.child);
- 			cl->prio.child = NULL;
- 		}
- 
-@@ -567,7 +567,7 @@ static void ceetm_destroy(struct Qdisc *
- 		 */
- 		for (ntx = 0; ntx < dev->num_tx_queues; ntx++)
- 			if (priv->root.qdiscs[ntx])
--				qdisc_destroy(priv->root.qdiscs[ntx]);
-+				qdisc_put(priv->root.qdiscs[ntx]);
- 
- 		kfree(priv->root.qdiscs);
- 		break;
-@@ -1367,7 +1367,7 @@ static void ceetm_attach(struct Qdisc *s
- 		qdisc = priv->root.qdiscs[i];
- 		old_qdisc = dev_graft_qdisc(qdisc->dev_queue, qdisc);
- 		if (old_qdisc)
--			qdisc_destroy(old_qdisc);
-+			qdisc_put(old_qdisc);
- 	}
- 
- 	kfree(priv->root.qdiscs);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0088-sdk_dpaa-remove-FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE.patch b/target/linux/layerscape/patches-5.4/701-net-0088-sdk_dpaa-remove-FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE.patch
deleted file mode 100644
index dbbe46d5a9..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0088-sdk_dpaa-remove-FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From 357ab2939dbddfb6849c55be9de577db078d9037 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Fri, 12 Oct 2018 16:56:57 +0300
-Subject: [PATCH] sdk_dpaa: remove FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
-
-Remove FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE and record the
-receive CPU in skb queue mapping to maintain the same CPU
-for tx in forwarding scenarios.
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/Kconfig           | 13 +------------
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c        |  2 +-
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h        | 12 ++----------
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c |  3 +--
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.h |  2 +-
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c     |  2 ++
- 6 files changed, 8 insertions(+), 26 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/Kconfig
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/Kconfig
-@@ -96,17 +96,6 @@ config FSL_DPAA_1588
-         help
-          Enable IEEE1588 support code.
- 
--config FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
--	bool "Use driver's Tx queue selection mechanism"
--	default y
--	depends on FSL_SDK_DPAA_ETH
--	help
--	  The DPAA-Ethernet driver defines a ndo_select_queue() callback for optimal selection
--	  of the egress FQ. That will override the XPS support for this netdevice.
--	  If for whatever reason you want to be in control of the egress FQ-to-CPU selection and mapping,
--	  or simply don't want to use the driver's ndo_select_queue() callback, then unselect this
--	  and use the standard XPS support instead.
--
- config FSL_DPAA_ETH_MAX_BUF_COUNT
- 	int "Maximum nuber of buffers in private bpool"
- 	depends on FSL_SDK_DPAA_ETH
-@@ -178,7 +167,7 @@ config FSL_DPAA_ETH_DEBUG
- 
- config FSL_DPAA_DBG_LOOP
- 	bool "DPAA Ethernet Debug loopback"
--	depends on FSL_DPAA_ETH_DEBUGFS && FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
-+	depends on FSL_DPAA_ETH_DEBUGFS
- 	default n
- 	help
- 	  This option allows to divert all received traffic on a certain interface A towards a
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-@@ -678,7 +678,7 @@ static const struct net_device_ops dpa_p
- 	.ndo_get_stats64 = dpa_get_stats64,
- 	.ndo_set_mac_address = dpa_set_mac_address,
- 	.ndo_validate_addr = eth_validate_addr,
--#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
-+#ifdef CONFIG_FMAN_PFC
- 	.ndo_select_queue = dpa_select_queue,
- #endif
- 	.ndo_set_rx_mode = dpa_set_rx_mode,
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-@@ -635,23 +635,15 @@ static inline void _dpa_assign_wq(struct
- 	}
- }
- 
--#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
--/* Use in lieu of skb_get_queue_mapping() */
- #ifdef CONFIG_FMAN_PFC
-+/* Use in lieu of skb_get_queue_mapping() */
- #define dpa_get_queue_mapping(skb) \
- 	(((skb)->priority < CONFIG_FMAN_PFC_COS_COUNT) ? \
- 		((skb)->priority * dpa_num_cpus + smp_processor_id()) : \
- 		((CONFIG_FMAN_PFC_COS_COUNT - 1) * \
- 			dpa_num_cpus + smp_processor_id()));
--
- #else
--#define dpa_get_queue_mapping(skb) \
--	raw_smp_processor_id()
--#endif
--#else
--/* Use the queue selected by XPS */
--#define dpa_get_queue_mapping(skb) \
--	skb_get_queue_mapping(skb)
-+#define dpa_get_queue_mapping(skb) skb_get_queue_mapping(skb)
- #endif
- 
- #ifdef CONFIG_PTP_1588_CLOCK_DPAA
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-@@ -841,14 +841,13 @@ bool dpa_bpid2pool_use(int bpid)
- 	return false;
- }
- 
--#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
-+#ifdef CONFIG_FMAN_PFC
- u16 dpa_select_queue(struct net_device *net_dev, struct sk_buff *skb,
- 		     struct net_device *sb_dev,
- 		     select_queue_fallback_t fallback)
- {
- 	return dpa_get_queue_mapping(skb);
- }
--EXPORT_SYMBOL(dpa_select_queue);
- #endif
- 
- struct dpa_fq *dpa_fq_alloc(struct device *dev,
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.h
-@@ -172,7 +172,7 @@ struct dpa_bp *dpa_bpid2pool(int bpid);
- void dpa_bpid2pool_map(int bpid, struct dpa_bp *dpa_bp);
- bool dpa_bpid2pool_use(int bpid);
- void dpa_bp_drain(struct dpa_bp *bp);
--#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
-+#ifdef CONFIG_FMAN_PFC
- u16 dpa_select_queue(struct net_device *net_dev, struct sk_buff *skb,
- 		     struct net_device *sb_dev,
- 		     select_queue_fallback_t fallback);
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -648,6 +648,8 @@ void __hot _dpa_rx(struct net_device *ne
- 	}
- #endif
- 
-+	skb_record_rx_queue(skb, raw_smp_processor_id());
-+
- 	if (use_gro) {
- 		gro_result_t gro_result;
- 		const struct qman_portal_config *pc =
diff --git a/target/linux/layerscape/patches-5.4/701-net-0089-fsl-fman-backup-and-restore-ICID-registers.patch b/target/linux/layerscape/patches-5.4/701-net-0089-fsl-fman-backup-and-restore-ICID-registers.patch
deleted file mode 100644
index a1ac7af5c3..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0089-fsl-fman-backup-and-restore-ICID-registers.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From ef2b0593c906a85ca59ed5957ae7a7361974349c Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 6 Feb 2018 16:21:17 +0200
-Subject: [PATCH] fsl/fman: backup and restore ICID registers
-
-During probing, FMAN is reset thus losing all its register
-settings. Backup port ICID registers before reset and restore
-them after, similarly to how it's done on powerpc / PAMU based
-platforms.
-This also has the side effect of disabling the old code path
-(liodn backup/restore handling) that obviously make no sense
-in the context of SMMU on ARMs.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/fman/fman.c | 35 +++++++++++++++++++++++++++++-
- drivers/net/ethernet/freescale/fman/fman.h |  4 ++++
- 2 files changed, 38 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/fman/fman.c
-+++ b/drivers/net/ethernet/freescale/fman/fman.c
-@@ -634,6 +634,7 @@ static void set_port_order_restoration(s
- 	iowrite32be(tmp, &fpm_rg->fmfp_prc);
- }
- 
-+#ifdef CONFIG_PPC
- static void set_port_liodn(struct fman *fman, u8 port_id,
- 			   u32 liodn_base, u32 liodn_ofst)
- {
-@@ -651,6 +652,27 @@ static void set_port_liodn(struct fman *
- 	iowrite32be(tmp, &fman->dma_regs->fmdmplr[port_id / 2]);
- 	iowrite32be(liodn_ofst, &fman->bmi_regs->fmbm_spliodn[port_id - 1]);
- }
-+#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+static void save_restore_port_icids(struct fman *fman, bool save)
-+{
-+	int port_idxes[] = {
-+		0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x8, 0x9, 0xa, 0xb, 0xc,
-+		0xd, 0xe, 0xf, 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
-+		0x10, 0x11, 0x30, 0x31
-+	};
-+	int idx, i;
-+
-+	for (i = 0; i < ARRAY_SIZE(port_idxes); i++) {
-+		idx = port_idxes[i];
-+		if (save)
-+			fman->sp_icids[idx] =
-+				ioread32be(&fman->bmi_regs->fmbm_spliodn[idx]);
-+		else
-+			iowrite32be(fman->sp_icids[idx],
-+				    &fman->bmi_regs->fmbm_spliodn[idx]);
-+	}
-+}
-+#endif
- 
- static void enable_rams_ecc(struct fman_fpm_regs __iomem *fpm_rg)
- {
-@@ -1918,7 +1940,10 @@ _return:
- static int fman_init(struct fman *fman)
- {
- 	struct fman_cfg *cfg = NULL;
--	int err = 0, i, count;
-+	int err = 0, count;
-+#ifdef CONFIG_PPC
-+	int i;
-+#endif
- 
- 	if (is_init_done(fman->cfg))
- 		return -EINVAL;
-@@ -1938,6 +1963,7 @@ static int fman_init(struct fman *fman)
- 	memset_io((void __iomem *)(fman->base_addr + CGP_OFFSET), 0,
- 		  fman->state->fm_port_num_of_cg);
- 
-+#ifdef CONFIG_PPC
- 	/* Save LIODN info before FMan reset
- 	 * Skipping non-existent port 0 (i = 1)
- 	 */
-@@ -1957,6 +1983,9 @@ static int fman_init(struct fman *fman)
- 		}
- 		fman->liodn_base[i] = liodn_base;
- 	}
-+#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+	save_restore_port_icids(fman, true);
-+#endif
- 
- 	err = fman_reset(fman);
- 	if (err)
-@@ -2185,8 +2214,12 @@ int fman_set_port_params(struct fman *fm
- 	if (err)
- 		goto return_err;
- 
-+#ifdef CONFIG_PPC
- 	set_port_liodn(fman, port_id, fman->liodn_base[port_id],
- 		       fman->liodn_offset[port_id]);
-+#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+	save_restore_port_icids(fman, false);
-+#endif
- 
- 	if (fman->state->rev_info.major < 6)
- 		set_port_order_restoration(fman->fpm_regs, port_id);
---- a/drivers/net/ethernet/freescale/fman/fman.h
-+++ b/drivers/net/ethernet/freescale/fman/fman.h
-@@ -347,8 +347,12 @@ struct fman {
- 	unsigned long fifo_offset;
- 	size_t fifo_size;
- 
-+#ifdef CONFIG_PPC
- 	u32 liodn_base[64];
- 	u32 liodn_offset[64];
-+#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-+	u32 sp_icids[64];
-+#endif
- 
- 	struct fman_dts_params dts_params;
- };
diff --git a/target/linux/layerscape/patches-5.4/701-net-0090-fsl-fman-add-API-to-get-the-device-behind-a-fman-por.patch b/target/linux/layerscape/patches-5.4/701-net-0090-fsl-fman-add-API-to-get-the-device-behind-a-fman-por.patch
deleted file mode 100644
index 58ed29c04f..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0090-fsl-fman-add-API-to-get-the-device-behind-a-fman-por.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 975717f04388a052cab9d3c3b6828d065372b82a Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 3 Apr 2018 17:11:07 +0300
-Subject: [PATCH] fsl/fman: add API to get the device behind a fman port
-
-Add an API that retrieves the 'struct device' that the specified fman
-port probed against. The new API will be used in a subsequent iommu
-enablement related patch.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/fman/fman_port.c | 14 ++++++++++++++
- drivers/net/ethernet/freescale/fman/fman_port.h |  2 ++
- 2 files changed, 16 insertions(+)
-
---- a/drivers/net/ethernet/freescale/fman/fman_port.c
-+++ b/drivers/net/ethernet/freescale/fman/fman_port.c
-@@ -1728,6 +1728,20 @@ u32 fman_port_get_qman_channel_id(struct
- }
- EXPORT_SYMBOL(fman_port_get_qman_channel_id);
- 
-+/**
-+ * fman_port_get_device
-+ * port:	Pointer to the FMan port device
-+ *
-+ * Get the 'struct device' associated to the specified FMan port device
-+ *
-+ * Return: pointer to associated 'struct device'
-+ */
-+struct device *fman_port_get_device(struct fman_port *port)
-+{
-+	return port->dev;
-+}
-+EXPORT_SYMBOL(fman_port_get_device);
-+
- int fman_port_get_hash_result_offset(struct fman_port *port, u32 *offset)
- {
- 	if (port->buffer_offsets.hash_result_offset == ILLEGAL_BASE)
---- a/drivers/net/ethernet/freescale/fman/fman_port.h
-+++ b/drivers/net/ethernet/freescale/fman/fman_port.h
-@@ -157,4 +157,6 @@ int fman_port_get_tstamp(struct fman_por
- 
- struct fman_port *fman_port_bind(struct device *dev);
- 
-+struct device *fman_port_get_device(struct fman_port *port);
-+
- #endif /* __FMAN_PORT_H */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0091-dpaa_eth-defer-probing-after-qbman.patch b/target/linux/layerscape/patches-5.4/701-net-0091-dpaa_eth-defer-probing-after-qbman.patch
deleted file mode 100644
index a86f7d9edb..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0091-dpaa_eth-defer-probing-after-qbman.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 9e1f89c4c637087dc8dc1a3f9f6bda5bff66e4ac Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 6 Feb 2018 14:40:32 +0200
-Subject: [PATCH] dpaa_eth: defer probing after qbman
-
-Enabling SMMU altered the order of device probing causing the dpaa1
-ethernet driver to get probed before qbman and causing a boot crash.
-Add predictability in the probing order by deferring the ethernet
-driver probe after qbman and portals by using the recently introduced
-qbman APIs.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 31 ++++++++++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
---- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-@@ -2947,6 +2947,37 @@ static int dpaa_eth_probe(struct platfor
- 	int err = 0, i, channel;
- 	struct device *dev;
- 
-+	err = bman_is_probed();
-+	if (!err)
-+		return -EPROBE_DEFER;
-+	if (err < 0) {
-+		dev_err(&pdev->dev, "failing probe due to bman probe error\n");
-+		return -ENODEV;
-+	}
-+	err = qman_is_probed();
-+	if (!err)
-+		return -EPROBE_DEFER;
-+	if (err < 0) {
-+		dev_err(&pdev->dev, "failing probe due to qman probe error\n");
-+		return -ENODEV;
-+	}
-+	err = bman_portals_probed();
-+	if (!err)
-+		return -EPROBE_DEFER;
-+	if (err < 0) {
-+		dev_err(&pdev->dev,
-+			"failing probe due to bman portals probe error\n");
-+		return -ENODEV;
-+	}
-+	err = qman_portals_probed();
-+	if (!err)
-+		return -EPROBE_DEFER;
-+	if (err < 0) {
-+		dev_err(&pdev->dev,
-+			"failing probe due to qman portals probe error\n");
-+		return -ENODEV;
-+	}
-+
- 	/* device used for DMA mapping */
- 	dev = pdev->dev.parent;
- 	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40));
diff --git a/target/linux/layerscape/patches-5.4/701-net-0092-dpaa_eth-base-dma-mappings-on-the-fman-rx-port.patch b/target/linux/layerscape/patches-5.4/701-net-0092-dpaa_eth-base-dma-mappings-on-the-fman-rx-port.patch
deleted file mode 100644
index 01cb5ed62b..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0092-dpaa_eth-base-dma-mappings-on-the-fman-rx-port.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 13296e938da191216395952cf49ddda96e67359c Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Thu, 5 Apr 2018 12:37:57 +0300
-Subject: [PATCH] dpaa_eth: base dma mappings on the fman rx port
-
-The dma transactions initiator is the rx fman port so that's the device
-that the dma mappings should be done. Previously the mappings were done
-through the MAC device which makes no sense because it's neither dma-able
-nor connected in any way to smmu.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 18 +++++++++---------
- 1 file changed, 9 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-@@ -2978,8 +2978,15 @@ static int dpaa_eth_probe(struct platfor
- 		return -ENODEV;
- 	}
- 
-+	mac_dev = dpaa_mac_dev_get(pdev);
-+	if (IS_ERR(mac_dev)) {
-+		dev_err(&pdev->dev, "dpaa_mac_dev_get() failed\n");
-+		err = PTR_ERR(mac_dev);
-+		goto probe_err;
-+	}
-+
- 	/* device used for DMA mapping */
--	dev = pdev->dev.parent;
-+	dev = fman_port_get_device(mac_dev->port[RX]);
- 	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40));
- 	if (err) {
- 		dev_err(dev, "dma_coerce_mask_and_coherent() failed\n");
-@@ -3004,13 +3011,6 @@ static int dpaa_eth_probe(struct platfor
- 
- 	priv->msg_enable = netif_msg_init(debug, DPAA_MSG_DEFAULT);
- 
--	mac_dev = dpaa_mac_dev_get(pdev);
--	if (IS_ERR(mac_dev)) {
--		dev_err(dev, "dpaa_mac_dev_get() failed\n");
--		err = PTR_ERR(mac_dev);
--		goto free_netdev;
--	}
--
- 	/* If fsl_fm_max_frm is set to a higher value than the all-common 1500,
- 	 * we choose conservatively and let the user explicitly set a higher
- 	 * MTU via ifconfig. Otherwise, the user may end up with different MTUs
-@@ -3146,9 +3146,9 @@ delete_egress_cgr:
- 	qman_release_cgrid(priv->cgr_data.cgr.cgrid);
- free_dpaa_bps:
- 	dpaa_bps_free(priv);
--free_netdev:
- 	dev_set_drvdata(dev, NULL);
- 	free_netdev(net_dev);
-+probe_err:
- 
- 	return err;
- }
diff --git a/target/linux/layerscape/patches-5.4/701-net-0093-dpaa_eth-fix-iova-handling-for-contiguous-frames.patch b/target/linux/layerscape/patches-5.4/701-net-0093-dpaa_eth-fix-iova-handling-for-contiguous-frames.patch
deleted file mode 100644
index 430bed1378..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0093-dpaa_eth-fix-iova-handling-for-contiguous-frames.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From 39e4cf29431dec8aaad599d9734f7a0468a9c20b Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Wed, 4 Apr 2018 12:31:05 +0300
-Subject: [PATCH] dpaa_eth: fix iova handling for contiguous frames
-
-The driver relies on the no longer valid assumption that dma addresses
-(iovas) are identical to physical addressees and uses phys_to_virt() to
-make iova -> vaddr conversions. Fix this by adding a function that does
-proper iova -> phys conversions using the iommu api and update the code
-to use it.
-Also, a dma_unmap_single() call had to be moved further down the code
-because iova -> vaddr conversions were required before the unmap.
-For now only the contiguous frame case is handled and the SG case is
-split in a following patch.
-While at it, clean-up a redundant dpaa_bpid2pool() and pass the bp
-as parameter.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 44 ++++++++++++++------------
- 1 file changed, 24 insertions(+), 20 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-@@ -50,6 +50,7 @@
- #include <linux/highmem.h>
- #include <linux/percpu.h>
- #include <linux/dma-mapping.h>
-+#include <linux/iommu.h>
- #include <linux/sort.h>
- #include <linux/phy_fixed.h>
- #include <soc/fsl/bman.h>
-@@ -1615,6 +1616,17 @@ static int dpaa_eth_refill_bpools(struct
- 	return 0;
- }
- 
-+static phys_addr_t dpaa_iova_to_phys(struct device *dev, dma_addr_t addr)
-+{
-+	struct iommu_domain *domain;
-+
-+	domain = iommu_get_domain_for_dev(dev);
-+	if (domain)
-+		return iommu_iova_to_phys(domain, addr);
-+	else
-+		return addr;
-+}
-+
- /* Cleanup function for outgoing frame descriptors that were built on Tx path,
-  * either contiguous frames or scatter/gather ones.
-  * Skb freeing is not handled here.
-@@ -1639,7 +1651,7 @@ static struct sk_buff *dpaa_cleanup_tx_f
- 	int nr_frags, i;
- 	u64 ns;
- 
--	skbh = (struct sk_buff **)phys_to_virt(addr);
-+	skbh = (struct sk_buff **)phys_to_virt(dpaa_iova_to_phys(dev, addr));
- 	skb = *skbh;
- 
- 	if (unlikely(qm_fd_get_format(fd) == qm_fd_sg)) {
-@@ -1718,25 +1730,21 @@ static u8 rx_csum_offload(const struct d
-  * accommodate the shared info area of the skb.
-  */
- static struct sk_buff *contig_fd_to_skb(const struct dpaa_priv *priv,
--					const struct qm_fd *fd)
-+					const struct qm_fd *fd,
-+					struct dpaa_bp *dpaa_bp,
-+					void *vaddr)
- {
- 	ssize_t fd_off = qm_fd_get_offset(fd);
--	dma_addr_t addr = qm_fd_addr(fd);
--	struct dpaa_bp *dpaa_bp;
- 	struct sk_buff *skb;
--	void *vaddr;
- 
--	vaddr = phys_to_virt(addr);
- 	WARN_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES));
- 
--	dpaa_bp = dpaa_bpid2pool(fd->bpid);
--	if (!dpaa_bp)
--		goto free_buffer;
--
- 	skb = build_skb(vaddr, dpaa_bp->size +
- 			SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
--	if (WARN_ONCE(!skb, "Build skb failure on Rx\n"))
--		goto free_buffer;
-+	if (WARN_ONCE(!skb, "Build skb failure on Rx\n")) {
-+		skb_free_frag(vaddr);
-+		return NULL;
-+	}
- 	WARN_ON(fd_off != priv->rx_headroom);
- 	skb_reserve(skb, fd_off);
- 	skb_put(skb, qm_fd_get_length(fd));
-@@ -1744,10 +1752,6 @@ static struct sk_buff *contig_fd_to_skb(
- 	skb->ip_summed = rx_csum_offload(priv, fd);
- 
- 	return skb;
--
--free_buffer:
--	skb_free_frag(vaddr);
--	return NULL;
- }
- 
- /* Build an skb with the data of the first S/G entry in the linear portion and
-@@ -2476,12 +2480,12 @@ static enum qman_cb_dqrr_result rx_defau
- 	if (!dpaa_bp)
- 		return qman_cb_dqrr_consume;
- 
--	dma_unmap_single(dpaa_bp->dev, addr, dpaa_bp->size, DMA_FROM_DEVICE);
--
- 	/* prefetch the first 64 bytes of the frame or the SGT start */
--	vaddr = phys_to_virt(addr);
-+	vaddr = phys_to_virt(dpaa_iova_to_phys(dpaa_bp->dev, addr));
- 	prefetch(vaddr + qm_fd_get_offset(fd));
- 
-+	dma_unmap_single(dpaa_bp->dev, addr, dpaa_bp->size, DMA_FROM_DEVICE);
-+
- 	/* The only FD types that we may receive are contig and S/G */
- 	WARN_ON((fd_format != qm_fd_contig) && (fd_format != qm_fd_sg));
- 
-@@ -2492,7 +2496,7 @@ static enum qman_cb_dqrr_result rx_defau
- 	(*count_ptr)--;
- 
- 	if (likely(fd_format == qm_fd_contig))
--		skb = contig_fd_to_skb(priv, fd);
-+		skb = contig_fd_to_skb(priv, fd, dpaa_bp, vaddr);
- 	else
- 		skb = sg_fd_to_skb(priv, fd);
- 	if (!skb)
diff --git a/target/linux/layerscape/patches-5.4/701-net-0094-dpaa_eth-fix-iova-handling-for-sg-frames.patch b/target/linux/layerscape/patches-5.4/701-net-0094-dpaa_eth-fix-iova-handling-for-sg-frames.patch
deleted file mode 100644
index 273d7e5ea8..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0094-dpaa_eth-fix-iova-handling-for-sg-frames.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From 73cc32aace5fe123182337c3abd769a1d6edd9fe Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Wed, 4 Apr 2018 15:12:28 +0300
-Subject: [PATCH] dpaa_eth: fix iova handling for sg frames
-
-The driver relies on the no longer valid assumption that dma addresses
-(iovas) are identical to physical addressees and uses phys_to_virt() to
-make iova -> vaddr conversions. Fix this also for scatter-gather frames
-using the iova -> phys conversion function added in the previous patch.
-While at it, clean-up a redundant dpaa_bpid2pool() and pass the bp
-as parameter.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 41 +++++++++++++++-----------
- 1 file changed, 24 insertions(+), 17 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-@@ -1656,14 +1656,17 @@ static struct sk_buff *dpaa_cleanup_tx_f
- 
- 	if (unlikely(qm_fd_get_format(fd) == qm_fd_sg)) {
- 		nr_frags = skb_shinfo(skb)->nr_frags;
--		dma_unmap_single(dev, addr,
--				 qm_fd_get_offset(fd) + DPAA_SGT_SIZE,
--				 dma_dir);
- 
- 		/* The sgt buffer has been allocated with netdev_alloc_frag(),
- 		 * it's from lowmem.
- 		 */
--		sgt = phys_to_virt(addr + qm_fd_get_offset(fd));
-+		sgt = phys_to_virt(dpaa_iova_to_phys(dev,
-+						     addr +
-+						     qm_fd_get_offset(fd)));
-+
-+		dma_unmap_single(dev, addr,
-+				 qm_fd_get_offset(fd) + DPAA_SGT_SIZE,
-+				 dma_dir);
- 
- 		/* sgt[0] is from lowmem, was dma_map_single()-ed */
- 		dma_unmap_single(dev, qm_sg_addr(&sgt[0]),
-@@ -1702,7 +1705,7 @@ static struct sk_buff *dpaa_cleanup_tx_f
- 		else
- #endif
- 			/* Free the page frag that we allocated on Tx */
--			skb_free_frag(phys_to_virt(addr));
-+			skb_free_frag(phys_to_virt(skbh));
- 	}
- 
- 	return skb;
-@@ -1760,14 +1763,14 @@ static struct sk_buff *contig_fd_to_skb(
-  * The page fragment holding the S/G Table is recycled here.
-  */
- static struct sk_buff *sg_fd_to_skb(const struct dpaa_priv *priv,
--				    const struct qm_fd *fd)
-+				    const struct qm_fd *fd,
-+				    struct dpaa_bp *dpaa_bp,
-+				    void *vaddr)
- {
- 	ssize_t fd_off = qm_fd_get_offset(fd);
--	dma_addr_t addr = qm_fd_addr(fd);
- 	const struct qm_sg_entry *sgt;
- 	struct page *page, *head_page;
--	struct dpaa_bp *dpaa_bp;
--	void *vaddr, *sg_vaddr;
-+	void *sg_vaddr;
- 	int frag_off, frag_len;
- 	struct sk_buff *skb;
- 	dma_addr_t sg_addr;
-@@ -1776,7 +1779,6 @@ static struct sk_buff *sg_fd_to_skb(cons
- 	int *count_ptr;
- 	int i;
- 
--	vaddr = phys_to_virt(addr);
- 	WARN_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES));
- 
- 	/* Iterate through the SGT entries and add data buffers to the skb */
-@@ -1787,14 +1789,18 @@ static struct sk_buff *sg_fd_to_skb(cons
- 		WARN_ON(qm_sg_entry_is_ext(&sgt[i]));
- 
- 		sg_addr = qm_sg_addr(&sgt[i]);
--		sg_vaddr = phys_to_virt(sg_addr);
--		WARN_ON(!IS_ALIGNED((unsigned long)sg_vaddr,
--				    SMP_CACHE_BYTES));
- 
- 		/* We may use multiple Rx pools */
- 		dpaa_bp = dpaa_bpid2pool(sgt[i].bpid);
--		if (!dpaa_bp)
-+		if (!dpaa_bp) {
-+			pr_info("%s: fail to get dpaa_bp for sg bpid %d\n",
-+				__func__, sgt[i].bpid);
- 			goto free_buffers;
-+		}
-+		sg_vaddr = phys_to_virt(dpaa_iova_to_phys(dpaa_bp->dev,
-+							  sg_addr));
-+		WARN_ON(!IS_ALIGNED((unsigned long)sg_vaddr,
-+				    SMP_CACHE_BYTES));
- 
- 		count_ptr = this_cpu_ptr(dpaa_bp->percpu_count);
- 		dma_unmap_single(dpaa_bp->dev, sg_addr, dpaa_bp->size,
-@@ -1866,10 +1872,11 @@ free_buffers:
- 	/* free all the SG entries */
- 	for (i = 0; i < DPAA_SGT_MAX_ENTRIES ; i++) {
- 		sg_addr = qm_sg_addr(&sgt[i]);
--		sg_vaddr = phys_to_virt(sg_addr);
--		skb_free_frag(sg_vaddr);
- 		dpaa_bp = dpaa_bpid2pool(sgt[i].bpid);
- 		if (dpaa_bp) {
-+			sg_addr = dpaa_iova_to_phys(dpaa_bp->dev, sg_addr);
-+			sg_vaddr = phys_to_virt(sg_addr);
-+			skb_free_frag(sg_vaddr);
- 			count_ptr = this_cpu_ptr(dpaa_bp->percpu_count);
- 			(*count_ptr)--;
- 		}
-@@ -2498,7 +2505,7 @@ static enum qman_cb_dqrr_result rx_defau
- 	if (likely(fd_format == qm_fd_contig))
- 		skb = contig_fd_to_skb(priv, fd, dpaa_bp, vaddr);
- 	else
--		skb = sg_fd_to_skb(priv, fd);
-+		skb = sg_fd_to_skb(priv, fd, dpaa_bp, vaddr);
- 	if (!skb)
- 		return qman_cb_dqrr_consume;
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0095-sdk_dpaa-ceetm-guard-against-an-out-of-bounds-queue-.patch b/target/linux/layerscape/patches-5.4/701-net-0095-sdk_dpaa-ceetm-guard-against-an-out-of-bounds-queue-.patch
deleted file mode 100644
index 6c41d0f7af..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0095-sdk_dpaa-ceetm-guard-against-an-out-of-bounds-queue-.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From cfda91fdd3396b97f2c08f0d8ed7749fbd87bb7b Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 30 Oct 2018 17:34:31 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: guard against an out of bounds queue index
-
-Make sure the queue mapping recorded in the skb is not larger than our
-egress queue count.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -1982,7 +1982,7 @@ static struct ceetm_class *ceetm_classif
- 
- int __hot ceetm_tx(struct sk_buff *skb, struct net_device *net_dev)
- {
--	const int queue_mapping = dpa_get_queue_mapping(skb);
-+	int queue_mapping = dpa_get_queue_mapping(skb);
- 	struct Qdisc *sch = net_dev->qdisc;
- 	struct ceetm_class_stats *cstats;
- 	struct ceetm_qdisc_stats *qstats;
-@@ -2016,6 +2016,9 @@ int __hot ceetm_tx(struct sk_buff *skb,
- 		goto drop;
- 	}
- 
-+	if (unlikely(queue_mapping >= DPAA_ETH_TX_QUEUES))
-+		queue_mapping = queue_mapping % DPAA_ETH_TX_QUEUES;
-+
- 	priv_dpa = netdev_priv(net_dev);
- 	conf_fq = priv_dpa->conf_fqs[queue_mapping];
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0096-sdk_dpaa-guard-against-an-out-of-bounds-queue-index.patch b/target/linux/layerscape/patches-5.4/701-net-0096-sdk_dpaa-guard-against-an-out-of-bounds-queue-index.patch
deleted file mode 100644
index 9616177009..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0096-sdk_dpaa-guard-against-an-out-of-bounds-queue-index.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 56203e34ec05e39a088036b5d9db7fde7a7af742 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 30 Oct 2018 18:18:30 +0200
-Subject: [PATCH] sdk_dpaa: guard against an out of bounds queue index
-
-Make sure the queue mapping recorded in the skb is not larger than our
-egress queue count.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -1035,7 +1035,7 @@ EXPORT_SYMBOL(skb_to_sg_fd);
- int __hot dpa_tx(struct sk_buff *skb, struct net_device *net_dev)
- {
- 	struct dpa_priv_s	*priv;
--	const int queue_mapping = dpa_get_queue_mapping(skb);
-+	int queue_mapping = dpa_get_queue_mapping(skb);
- 	struct qman_fq *egress_fq, *conf_fq;
- 
- #ifdef CONFIG_FSL_DPAA_HOOKS
-@@ -1053,6 +1053,9 @@ int __hot dpa_tx(struct sk_buff *skb, st
- 		return ceetm_tx(skb, net_dev);
- #endif
- 
-+	if (unlikely(queue_mapping >= DPAA_ETH_TX_QUEUES))
-+		queue_mapping = queue_mapping % DPAA_ETH_TX_QUEUES;
-+
- 	egress_fq = priv->egress_fqs[queue_mapping];
- 	conf_fq = priv->conf_fqs[queue_mapping];
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0097-sdk_dpaa-set-the-skb-queue-mapping-when-looping.patch b/target/linux/layerscape/patches-5.4/701-net-0097-sdk_dpaa-set-the-skb-queue-mapping-when-looping.patch
deleted file mode 100644
index f4a0b3e302..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0097-sdk_dpaa-set-the-skb-queue-mapping-when-looping.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From ae59df58bacb7d3daf2cf736f286a368ee703778 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 30 Oct 2018 18:18:57 +0200
-Subject: [PATCH] sdk_dpaa: set the skb queue mapping when looping
-
-Save the current CPU ID on ingress, when FSL_DPAA_DBG_LOOP is set.
-Use the skb_set_queue_mapping() call instead of skb_record_rx_queue()
-because the stack isn't involved and won't compensate for the additional
-offset.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -575,6 +575,8 @@ static inline int dpa_skb_loop(const str
- 		return 0; /* loop disabled by default */
- 
- 	skb_push(skb, ETH_HLEN); /* compensate for eth_type_trans */
-+	/* Save the current CPU ID in order to maintain core affinity */
-+	skb_set_queue_mapping(skb, raw_smp_processor_id());
- 	dpa_tx(skb, dpa_loop_netdevs[priv->loop_to]);
- 
- 	return 1; /* Frame Tx on the selected interface */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0098-sdk_dpaa-remove-ptp-clock-driver.patch b/target/linux/layerscape/patches-5.4/701-net-0098-sdk_dpaa-remove-ptp-clock-driver.patch
deleted file mode 100644
index a34d952f7e..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0098-sdk_dpaa-remove-ptp-clock-driver.patch
+++ /dev/null
@@ -1,392 +0,0 @@
-From 0738b02f733717693226db401784e884a0714d41 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Wed, 31 Oct 2018 16:59:01 +0800
-Subject: [PATCH] sdk_dpaa: remove ptp clock driver
-
-Removed dpaa_ptp driver since we could use common
-ptp_qoriq driver in drivers/ptp/ instead.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/Makefile   |   1 -
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h |  10 -
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_common.c  |  21 --
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ptp.c | 291 ---------------------
- drivers/net/ethernet/freescale/sdk_dpaa/mac.h      |   3 +-
- 5 files changed, 1 insertion(+), 325 deletions(-)
- delete mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ptp.c
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/Makefile
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/Makefile
-@@ -9,7 +9,6 @@ include $(srctree)/drivers/net/ethernet/
- ccflags-y += -I$(NET_DPA)
- 
- obj-$(CONFIG_FSL_SDK_DPAA_ETH) += fsl_mac.o fsl_dpa.o
--obj-$(CONFIG_PTP_1588_CLOCK_DPAA) += dpaa_ptp.o
- 
- fsl_dpa-objs += dpaa_ethtool.o dpaa_eth_sysfs.o dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o
- ifeq ($(CONFIG_FSL_DPAA_DBG_LOOP),y)
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-@@ -646,16 +646,6 @@ static inline void _dpa_assign_wq(struct
- #define dpa_get_queue_mapping(skb) skb_get_queue_mapping(skb)
- #endif
- 
--#ifdef CONFIG_PTP_1588_CLOCK_DPAA
--struct ptp_priv_s {
--	struct device_node *node;
--	struct platform_device *of_dev;
--	struct ptp_clock *clock;
--	struct mac_device *mac_dev;
--};
--extern struct ptp_priv_s ptp_priv;
--#endif
--
- static inline void _dpa_bp_free_pf(void *addr)
- {
- 	put_page(virt_to_head_page(addr));
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-@@ -55,10 +55,6 @@
- /* Size in bytes of the FQ taildrop threshold */
- #define DPA_FQ_TD		0x200000
- 
--#ifdef CONFIG_PTP_1588_CLOCK_DPAA
--struct ptp_priv_s ptp_priv;
--#endif
--
- static struct dpa_bp *dpa_bp_array[64];
- 
- int dpa_max_frm;
-@@ -579,23 +575,6 @@ dpa_mac_probe(struct platform_device *_o
- 	}
- #endif
- 
--#ifdef CONFIG_PTP_1588_CLOCK_DPAA
--	if ((mac_dev->phy_if != PHY_INTERFACE_MODE_SGMII) ||
--	    ((mac_dev->phy_if == PHY_INTERFACE_MODE_SGMII) &&
--			 (mac_dev->speed == SPEED_1000))) {
--		ptp_priv.node = of_parse_phandle(mac_node, "ptp-timer", 0);
--		if (ptp_priv.node) {
--			ptp_priv.of_dev = of_find_device_by_node(ptp_priv.node);
--			if (unlikely(ptp_priv.of_dev == NULL)) {
--				dev_err(dpa_dev,
--			"Cannot find device represented by timer_node\n");
--				of_node_put(ptp_priv.node);
--				return ERR_PTR(-EINVAL);
--			}
--			ptp_priv.mac_dev = mac_dev;
--		}
--	}
--#endif
- 	return mac_dev;
- }
- EXPORT_SYMBOL(dpa_mac_probe);
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ptp.c
-+++ /dev/null
-@@ -1,291 +0,0 @@
--/*
-- * DPAA Ethernet Driver -- PTP 1588 clock using the dTSEC
-- *
-- * Author: Yangbo Lu <yangbo.lu@freescale.com>
-- *
-- * Copyright 2014 Freescale Semiconductor, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License as published by the
-- * Free Software Foundation; either version 2 of the License, or (at your
-- * option) any later version.
--*/
--
--#include <linux/device.h>
--#include <linux/hrtimer.h>
--#include <linux/init.h>
--#include <linux/interrupt.h>
--#include <linux/kernel.h>
--#include <linux/module.h>
--#include <linux/of.h>
--#include <linux/of_platform.h>
--#include <linux/timex.h>
--#include <linux/io.h>
--
--#include <linux/ptp_clock_kernel.h>
--
--#include "dpaa_eth.h"
--#include "mac.h"
--
--static struct mac_device *mac_dev;
--static u32 freqCompensation;
--
--/* Bit definitions for the TMR_CTRL register */
--#define ALM1P                 (1<<31) /* Alarm1 output polarity */
--#define ALM2P                 (1<<30) /* Alarm2 output polarity */
--#define FS                    (1<<28) /* FIPER start indication */
--#define PP1L                  (1<<27) /* Fiper1 pulse loopback mode enabled. */
--#define PP2L                  (1<<26) /* Fiper2 pulse loopback mode enabled. */
--#define TCLK_PERIOD_SHIFT     (16) /* 1588 timer reference clock period. */
--#define TCLK_PERIOD_MASK      (0x3ff)
--#define RTPE                  (1<<15) /* Record Tx Timestamp to PAL Enable. */
--#define FRD                   (1<<14) /* FIPER Realignment Disable */
--#define ESFDP                 (1<<11) /* External Tx/Rx SFD Polarity. */
--#define ESFDE                 (1<<10) /* External Tx/Rx SFD Enable. */
--#define ETEP2                 (1<<9) /* External trigger 2 edge polarity */
--#define ETEP1                 (1<<8) /* External trigger 1 edge polarity */
--#define COPH                  (1<<7) /* Generated clock output phase. */
--#define CIPH                  (1<<6) /* External oscillator input clock phase */
--#define TMSR                  (1<<5) /* Timer soft reset. */
--#define BYP                   (1<<3) /* Bypass drift compensated clock */
--#define TE                    (1<<2) /* 1588 timer enable. */
--#define CKSEL_SHIFT           (0)    /* 1588 Timer reference clock source */
--#define CKSEL_MASK            (0x3)
--
--/* Bit definitions for the TMR_TEVENT register */
--#define ETS2                  (1<<25) /* External trigger 2 timestamp sampled */
--#define ETS1                  (1<<24) /* External trigger 1 timestamp sampled */
--#define ALM2                  (1<<17) /* Current time = alarm time register 2 */
--#define ALM1                  (1<<16) /* Current time = alarm time register 1 */
--#define PP1                   (1<<7)  /* periodic pulse generated on FIPER1 */
--#define PP2                   (1<<6)  /* periodic pulse generated on FIPER2 */
--#define PP3                   (1<<5)  /* periodic pulse generated on FIPER3 */
--
--/* Bit definitions for the TMR_TEMASK register */
--#define ETS2EN                (1<<25) /* External trigger 2 timestamp enable */
--#define ETS1EN                (1<<24) /* External trigger 1 timestamp enable */
--#define ALM2EN                (1<<17) /* Timer ALM2 event enable */
--#define ALM1EN                (1<<16) /* Timer ALM1 event enable */
--#define PP1EN                 (1<<7) /* Periodic pulse event 1 enable */
--#define PP2EN                 (1<<6) /* Periodic pulse event 2 enable */
--
--/* Bit definitions for the TMR_PEVENT register */
--#define TXP2                  (1<<9) /* PTP transmitted timestamp im TXTS2 */
--#define TXP1                  (1<<8) /* PTP transmitted timestamp in TXTS1 */
--#define RXP                   (1<<0) /* PTP frame has been received */
--
--/* Bit definitions for the TMR_PEMASK register */
--#define TXP2EN                (1<<9) /* Transmit PTP packet event 2 enable */
--#define TXP1EN                (1<<8) /* Transmit PTP packet event 1 enable */
--#define RXPEN                 (1<<0) /* Receive PTP packet event enable */
--
--/* Bit definitions for the TMR_STAT register */
--#define STAT_VEC_SHIFT        (0) /* Timer general purpose status vector */
--#define STAT_VEC_MASK         (0x3f)
--
--/* Bit definitions for the TMR_PRSC register */
--#define PRSC_OCK_SHIFT        (0) /* Output clock division/prescale factor. */
--#define PRSC_OCK_MASK         (0xffff)
--
--
--#define N_EXT_TS	2
--
--static void set_alarm(void)
--{
--	u64 ns;
--
--	if (mac_dev->fm_rtc_get_cnt)
--		mac_dev->fm_rtc_get_cnt(mac_dev->fm_dev, &ns);
--	ns += 1500000000ULL;
--	ns = div_u64(ns, 1000000000UL) * 1000000000ULL;
--	ns -= DPA_PTP_NOMINAL_FREQ_PERIOD_NS;
--	if (mac_dev->fm_rtc_set_alarm)
--		mac_dev->fm_rtc_set_alarm(mac_dev->fm_dev, 0, ns);
--}
--
--static void set_fipers(void)
--{
--	u64 fiper;
--
--	if (mac_dev->fm_rtc_disable)
--		mac_dev->fm_rtc_disable(mac_dev->fm_dev);
--
--	set_alarm();
--	fiper = 1000000000ULL - DPA_PTP_NOMINAL_FREQ_PERIOD_NS;
--	if (mac_dev->fm_rtc_set_fiper)
--		mac_dev->fm_rtc_set_fiper(mac_dev->fm_dev, 0, fiper);
--
--	if (mac_dev->fm_rtc_enable)
--		mac_dev->fm_rtc_enable(mac_dev->fm_dev);
--}
--
--/* PTP clock operations */
--
--static int ptp_dpa_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
--{
--	u64 adj;
--	u32 diff, tmr_add;
--	int neg_adj = 0;
--
--	if (ppb < 0) {
--		neg_adj = 1;
--		ppb = -ppb;
--	}
--
--	tmr_add = freqCompensation;
--	adj = tmr_add;
--	adj *= ppb;
--	diff = div_u64(adj, 1000000000ULL);
--
--	tmr_add = neg_adj ? tmr_add - diff : tmr_add + diff;
--
--	if (mac_dev->fm_rtc_set_drift)
--		mac_dev->fm_rtc_set_drift(mac_dev->fm_dev, tmr_add);
--
--	return 0;
--}
--
--static int ptp_dpa_adjtime(struct ptp_clock_info *ptp, s64 delta)
--{
--	s64 now;
--
--	if (mac_dev->fm_rtc_get_cnt)
--		mac_dev->fm_rtc_get_cnt(mac_dev->fm_dev, &now);
--
--	now += delta;
--
--	if (mac_dev->fm_rtc_set_cnt)
--		mac_dev->fm_rtc_set_cnt(mac_dev->fm_dev, now);
--	set_fipers();
--
--	return 0;
--}
--
--static int ptp_dpa_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
--{
--	u64 ns;
--	u32 remainder;
--
--	if (mac_dev->fm_rtc_get_cnt)
--		mac_dev->fm_rtc_get_cnt(mac_dev->fm_dev, &ns);
--
--	ts->tv_sec = div_u64_rem(ns, 1000000000, &remainder);
--	ts->tv_nsec = remainder;
--	return 0;
--}
--
--static int ptp_dpa_settime(struct ptp_clock_info *ptp,
--			       const struct timespec64 *ts)
--{
--	u64 ns;
--
--	ns = ts->tv_sec * 1000000000ULL;
--	ns += ts->tv_nsec;
--
--	if (mac_dev->fm_rtc_set_cnt)
--		mac_dev->fm_rtc_set_cnt(mac_dev->fm_dev, ns);
--	set_fipers();
--	return 0;
--}
--
--static int ptp_dpa_enable(struct ptp_clock_info *ptp,
--			      struct ptp_clock_request *rq, int on)
--{
--	u32 bit;
--
--	switch (rq->type) {
--	case PTP_CLK_REQ_EXTTS:
--		switch (rq->extts.index) {
--		case 0:
--			bit = ETS1EN;
--			break;
--		case 1:
--			bit = ETS2EN;
--			break;
--		default:
--			return -EINVAL;
--		}
--		if (on) {
--			if (mac_dev->fm_rtc_enable_interrupt)
--				mac_dev->fm_rtc_enable_interrupt(
--					mac_dev->fm_dev, bit);
--		} else {
--			if (mac_dev->fm_rtc_disable_interrupt)
--				mac_dev->fm_rtc_disable_interrupt(
--					mac_dev->fm_dev, bit);
--		}
--		return 0;
--
--	case PTP_CLK_REQ_PPS:
--		if (on) {
--			if (mac_dev->fm_rtc_enable_interrupt)
--				mac_dev->fm_rtc_enable_interrupt(
--					mac_dev->fm_dev, PP1EN);
--		} else {
--			if (mac_dev->fm_rtc_disable_interrupt)
--				mac_dev->fm_rtc_disable_interrupt(
--					mac_dev->fm_dev, PP1EN);
--		}
--		return 0;
--
--	default:
--		break;
--	}
--
--	return -EOPNOTSUPP;
--}
--
--static struct ptp_clock_info ptp_dpa_caps = {
--	.owner		= THIS_MODULE,
--	.name		= "dpaa clock",
--	.max_adj	= 512000,
--	.n_alarm	= 0,
--	.n_ext_ts	= N_EXT_TS,
--	.n_per_out	= 0,
--	.pps		= 1,
--	.adjfreq	= ptp_dpa_adjfreq,
--	.adjtime	= ptp_dpa_adjtime,
--	.gettime64	= ptp_dpa_gettime,
--	.settime64	= ptp_dpa_settime,
--	.enable		= ptp_dpa_enable,
--};
--
--static int __init __cold dpa_ptp_load(void)
--{
--	struct device *ptp_dev;
--	struct timespec64 now;
--	struct ptp_clock *clock = ptp_priv.clock;
--	int dpa_phc_index;
--	int err;
--
--	if (!(ptp_priv.of_dev && ptp_priv.mac_dev))
--		return -ENODEV;
--
--	ptp_dev = &ptp_priv.of_dev->dev;
--	mac_dev = ptp_priv.mac_dev;
--
--	if (mac_dev->fm_rtc_get_drift)
--		mac_dev->fm_rtc_get_drift(mac_dev->fm_dev, &freqCompensation);
--
--	getnstimeofday64(&now);
--	ptp_dpa_settime(&ptp_dpa_caps, &now);
--
--	clock = ptp_clock_register(&ptp_dpa_caps, ptp_dev);
--	if (IS_ERR(clock)) {
--		err = PTR_ERR(clock);
--		return err;
--	}
--	dpa_phc_index = ptp_clock_index(clock);
--	return 0;
--}
--module_init(dpa_ptp_load);
--
--static void __exit __cold dpa_ptp_unload(void)
--{
--	struct ptp_clock *clock = ptp_priv.clock;
--
--	if (mac_dev->fm_rtc_disable_interrupt)
--		mac_dev->fm_rtc_disable_interrupt(mac_dev->fm_dev, 0xffffffff);
--	ptp_clock_unregister(clock);
--}
--module_exit(dpa_ptp_unload);
---- a/drivers/net/ethernet/freescale/sdk_dpaa/mac.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac.h
-@@ -97,10 +97,9 @@ struct mac_device {
- 	int (*fm_rtc_set_alarm)(struct fm *fm_dev, uint32_t id, uint64_t time);
- 	int (*fm_rtc_set_fiper)(struct fm *fm_dev, uint32_t id,
- 				uint64_t fiper);
--#ifdef CONFIG_PTP_1588_CLOCK_DPAA
- 	int (*fm_rtc_enable_interrupt)(struct fm *fm_dev, uint32_t events);
- 	int (*fm_rtc_disable_interrupt)(struct fm *fm_dev, uint32_t events);
--#endif
-+
- 	int (*set_wol)(struct fm_port *port, struct fm_mac_dev *fm_mac_dev,
- 			bool en);
- 	int (*dump_mac_regs)(struct mac_device *h_mac, char *buf, int nn);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0099-sdk_fman-suspend-the-FMan-to-Deep-Sleep-on-PPC-only.patch b/target/linux/layerscape/patches-5.4/701-net-0099-sdk_fman-suspend-the-FMan-to-Deep-Sleep-on-PPC-only.patch
deleted file mode 100644
index 677dbbc077..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0099-sdk_fman-suspend-the-FMan-to-Deep-Sleep-on-PPC-only.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 2223efd48766e22bbf56ba6000078af9e32c7772 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 17 Dec 2018 15:20:42 +0200
-Subject: [PATCH] sdk_fman: suspend the FMan to Deep Sleep on PPC only
-
-The SCFG_FMCLKDPSLPCR register is present on PPC targets only. This
-feature does not apply to ARM SoCs.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c    | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-@@ -251,7 +251,7 @@ static irqreturn_t fm_irq(int irq, void
- #ifdef CONFIG_PM_SLEEP
-     if (fman_get_normal_pending(p_Fm->p_FmFpmRegs) & INTR_EN_WAKEUP)
-     {
--        pm_wakeup_event(p_LnxWrpFmDev->dev, 200);        
-+        pm_wakeup_event(p_LnxWrpFmDev->dev, 200);
-     }
- #endif
-     FM_EventIsr(p_LnxWrpFmDev->h_Dev);
-@@ -1107,7 +1107,7 @@ static t_Error InitFmDev(t_LnxWrpFmDev
-         p_LnxWrpFmDev->fmDevSettings.param.fmMacClkRatio =
-             !!(get_rcwsr(4) & 0x1); /* RCW[FM_MAC_RAT1] */
- 
--    {   
-+    {
-     /* T4 Devices ClkRatio is always 1 regardless of RCW[FM_MAC_RAT1] */
-         uint32_t svr;
-         svr = mfspr(SPRN_SVR);
-@@ -1320,7 +1320,7 @@ static const struct of_device_id fm_matc
- MODULE_DEVICE_TABLE(of, fm_match);
- #endif /* !MODULE */
- 
--#ifdef CONFIG_PM
-+#if defined CONFIG_PM && (defined CONFIG_PPC || defined CONFIG_PPC64)
- 
- #define SCFG_FMCLKDPSLPCR_ADDR 0xFFE0FC00C
- #define SCFG_FMCLKDPSLPCR_DS_VAL 0x48402000
-@@ -1373,11 +1373,11 @@ static const struct dev_pm_ops fm_pm_ops
- 
- #define FM_PM_OPS (&fm_pm_ops)
- 
--#else /* CONFIG_PM */
-+#else /* CONFIG_PM && (CONFIG_PPC || CONFIG_PPC64) */
- 
- #define FM_PM_OPS NULL
- 
--#endif /* CONFIG_PM */
-+#endif /* CONFIG_PM && (CONFIG_PPC || CONFIG_PPC64) */
- 
- static struct platform_driver fm_driver = {
-     .driver = {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0100-sdk_fman-disable-ptp-timer-probe.patch b/target/linux/layerscape/patches-5.4/701-net-0100-sdk_fman-disable-ptp-timer-probe.patch
deleted file mode 100644
index 6976abe912..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0100-sdk_fman-disable-ptp-timer-probe.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From c96c8b30729c5e3ab2dc36d344f4d1a1a2ae400c Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Wed, 31 Oct 2018 17:07:40 +0800
-Subject: [PATCH] sdk_fman: disable ptp timer probe
-
-DPAA PTP timer was managed by ptp_qoriq driver in drivers/ptp/.
-We will no longer manage it in sdk_fman driver and use related
-APIs.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-@@ -682,6 +682,11 @@ static t_LnxWrpFmDev * ReadFmDevTreeNode
-         }
-     }
- 
-+/* DPAA PTP timer was managed by ptp_qoriq driver in drivers/ptp/.
-+ * We will no longer manage it in sdk_fman driver and use related
-+ * APIs.
-+ */
-+#if 0
-     /* Get the RTC base address and size */
-     memset(ids, 0, sizeof(ids));
-     if (WARN_ON(strlen("ptp-timer") >= sizeof(ids[0].name)))
-@@ -704,6 +709,7 @@ static t_LnxWrpFmDev * ReadFmDevTreeNode
-             p_LnxWrpFmDev->fmRtcMemSize = res.end + 1 - res.start;
-         }
-     }
-+#endif
- 
- #if (DPAA_VERSION >= 11)
-     /* Get the VSP base address */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0101-sdk_dpaa-add-the-get_ts_info-interface-for-ethtool.patch b/target/linux/layerscape/patches-5.4/701-net-0101-sdk_dpaa-add-the-get_ts_info-interface-for-ethtool.patch
deleted file mode 100644
index 2343fba9a0..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0101-sdk_dpaa-add-the-get_ts_info-interface-for-ethtool.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 0ade532080c8cc777cd2af78b11040a353b89880 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Thu, 1 Nov 2018 10:34:52 +0800
-Subject: [PATCH] sdk_dpaa: add the get_ts_info interface for ethtool
-
-Added the get_ts_info interface for ethtool to check
-the timestamping capability.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- .../net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c | 45 ++++++++++++++++++++++
- 1 file changed, 45 insertions(+)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c
-@@ -39,6 +39,9 @@
- #endif
- 
- #include <linux/string.h>
-+#include <linux/of_platform.h>
-+#include <linux/net_tstamp.h>
-+#include <linux/fsl/ptp_qoriq.h>
- 
- #include "dpaa_eth.h"
- #include "mac.h"                /* struct mac_device */
-@@ -519,6 +522,47 @@ static void dpa_get_strings(struct net_d
- 	memcpy(strings, dpa_stats_global, size);
- }
- 
-+static int dpaa_get_ts_info(struct net_device *net_dev,
-+			    struct ethtool_ts_info *info)
-+{
-+	struct dpa_priv_s *priv = netdev_priv(net_dev);
-+	struct device *dev = priv->mac_dev->dev;
-+	struct device_node *mac_node = dev->of_node;
-+	struct device_node *fman_node = NULL, *ptp_node = NULL;
-+	struct platform_device *ptp_dev = NULL;
-+	struct qoriq_ptp *ptp = NULL;
-+
-+	info->phc_index = -1;
-+
-+	fman_node = of_get_parent(mac_node);
-+	if (fman_node)
-+		ptp_node = of_parse_phandle(fman_node, "ptimer-handle", 0);
-+
-+	if (ptp_node)
-+		ptp_dev = of_find_device_by_node(ptp_node);
-+
-+	if (ptp_dev)
-+		ptp = platform_get_drvdata(ptp_dev);
-+
-+	if (ptp)
-+		info->phc_index = ptp->phc_index;
-+
-+#ifdef CONFIG_FSL_DPAA_TS
-+	info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE |
-+				SOF_TIMESTAMPING_RX_HARDWARE |
-+				SOF_TIMESTAMPING_RAW_HARDWARE;
-+	info->tx_types = (1 << HWTSTAMP_TX_OFF) |
-+			 (1 << HWTSTAMP_TX_ON);
-+	info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
-+			   (1 << HWTSTAMP_FILTER_ALL);
-+#else
-+	info->so_timestamping = SOF_TIMESTAMPING_RX_SOFTWARE |
-+				SOF_TIMESTAMPING_SOFTWARE;
-+#endif
-+
-+	return 0;
-+}
-+
- const struct ethtool_ops dpa_ethtool_ops = {
- 	.get_link_ksettings = dpa_get_ksettings,
- 	.set_link_ksettings = dpa_set_ksettings,
-@@ -539,4 +583,5 @@ const struct ethtool_ops dpa_ethtool_ops
- 	.get_wol = dpa_get_wol,
- 	.set_wol = dpa_set_wol,
- #endif
-+	.get_ts_info = dpaa_get_ts_info,
- };
diff --git a/target/linux/layerscape/patches-5.4/701-net-0102-sdk_fman-share-the-event-interrupt.patch b/target/linux/layerscape/patches-5.4/701-net-0102-sdk_fman-share-the-event-interrupt.patch
deleted file mode 100644
index 2dc042e811..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0102-sdk_fman-share-the-event-interrupt.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 078d5cda5fc94e1d40d8d44bc4a0067341f02e72 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Thu, 1 Nov 2018 12:10:59 +0800
-Subject: [PATCH] sdk_fman: share the event interrupt
-
-This patch is to share fman event interrupt because
-the 1588 timer driver will also use this interrupt.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-@@ -883,7 +883,7 @@ static t_Error ConfigureFmDev(t_LnxWrpFm
-     if (unlikely(_errno < 0))
-         RETURN_ERROR(MAJOR, E_INVALID_STATE, ("can_request_irq() = %d", _errno));
- #endif
--    _errno = devm_request_irq(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->irq, fm_irq, 0, "fman", p_LnxWrpFmDev);
-+    _errno = devm_request_irq(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->irq, fm_irq, IRQF_SHARED, "fman", p_LnxWrpFmDev);
-     if (unlikely(_errno < 0))
-         RETURN_ERROR(MAJOR, E_INVALID_STATE, ("request_irq(%d) = %d", p_LnxWrpFmDev->irq, _errno));
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0103-sdk_dpaa-fix-hardware-timestamp-value.patch b/target/linux/layerscape/patches-5.4/701-net-0103-sdk_dpaa-fix-hardware-timestamp-value.patch
deleted file mode 100644
index e219c39739..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0103-sdk_dpaa-fix-hardware-timestamp-value.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From c96c65930fb5a348d96b88f4edeea1ddf8229c28 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Thu, 1 Nov 2018 15:34:17 +0800
-Subject: [PATCH] sdk_dpaa: fix hardware timestamp value
-
-The hardware timestamp value got didn't need to be multiplied
-by nominal frequency since ptp_qoriq driver initialized the
-counter to add clock period, not the clock tick.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-@@ -306,7 +306,7 @@ EXPORT_SYMBOL(dpa_fix_features);
- u64 dpa_get_timestamp_ns(const struct dpa_priv_s *priv, enum port_type rx_tx,
- 			const void *data)
- {
--	u64 *ts, ns;
-+	u64 *ts;
- 
- 	ts = fm_port_get_buffer_time_stamp(priv->mac_dev->port_dev[rx_tx],
- 					   data);
-@@ -316,10 +316,7 @@ u64 dpa_get_timestamp_ns(const struct dp
- 
- 	be64_to_cpus(ts);
- 
--	/* multiple DPA_PTP_NOMINAL_FREQ_PERIOD_NS for case of non power of 2 */
--	ns = *ts << DPA_PTP_NOMINAL_FREQ_PERIOD_SHIFT;
--
--	return ns;
-+	return *ts;
- }
- 
- int dpa_get_ts(const struct dpa_priv_s *priv, enum port_type rx_tx,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0104-sdk_dpaa-remove-useless-1588-timer-enablement.patch b/target/linux/layerscape/patches-5.4/701-net-0104-sdk_dpaa-remove-useless-1588-timer-enablement.patch
deleted file mode 100644
index 7454be5286..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0104-sdk_dpaa-remove-useless-1588-timer-enablement.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 988cd7a6bcbb738d6ad334a94fda07c965da862e Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Wed, 5 Dec 2018 16:31:13 +0800
-Subject: [PATCH] sdk_dpaa: remove useless 1588 timer enablement
-
-1588 timer had been enabled to run at ptp_qoriq driver
-probing stage. So removed the useless enablement.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c | 4 ----
- 1 file changed, 4 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-@@ -340,8 +340,6 @@ static void dpa_ts_tx_enable(struct net_
- 	struct dpa_priv_s *priv = netdev_priv(dev);
- 	struct mac_device *mac_dev = priv->mac_dev;
- 
--	if (mac_dev->fm_rtc_enable)
--		mac_dev->fm_rtc_enable(get_fm_handle(dev));
- 	if (mac_dev->ptp_enable)
- 		mac_dev->ptp_enable(mac_dev->get_mac_handle(mac_dev));
- 
-@@ -373,8 +371,6 @@ static void dpa_ts_rx_enable(struct net_
- 	struct dpa_priv_s *priv = netdev_priv(dev);
- 	struct mac_device *mac_dev = priv->mac_dev;
- 
--	if (mac_dev->fm_rtc_enable)
--		mac_dev->fm_rtc_enable(get_fm_handle(dev));
- 	if (mac_dev->ptp_enable)
- 		mac_dev->ptp_enable(mac_dev->get_mac_handle(mac_dev));
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0105-sdk-qbman-fix-issue-in-qman_delete_cgr_safe.patch b/target/linux/layerscape/patches-5.4/701-net-0105-sdk-qbman-fix-issue-in-qman_delete_cgr_safe.patch
deleted file mode 100644
index 830a2ec05b..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0105-sdk-qbman-fix-issue-in-qman_delete_cgr_safe.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From a16c129c9dfae01921faaed98587d318459d5cfc Mon Sep 17 00:00:00 2001
-From: Zhao Qiang <qiang.zhao@nxp.com>
-Date: Wed, 30 May 2018 17:09:02 +0800
-Subject: [PATCH] sdk/qbman: fix issue in qman_delete_cgr_safe()
-
-The wait_for_completion() call in qman_delete_cgr_safe()
-was triggering a scheduling while atomic bug, replacing the
-kthread with a smp_call_function_single() call to fix it.
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
-Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
----
- drivers/staging/fsl_qbman/qman_high.c | 29 ++++++-----------------------
- 1 file changed, 6 insertions(+), 23 deletions(-)
-
---- a/drivers/staging/fsl_qbman/qman_high.c
-+++ b/drivers/staging/fsl_qbman/qman_high.c
-@@ -3075,36 +3075,19 @@ struct cgr_comp {
- 	struct completion completion;
- };
- 
--static int qman_delete_cgr_thread(void *p)
-+static void qman_delete_cgr_smp_call(void *p)
- {
--	struct cgr_comp *cgr_comp = (struct cgr_comp *)p;
--	int res;
--
--	res = qman_delete_cgr((struct qman_cgr *)cgr_comp->cgr);
--	complete(&cgr_comp->completion);
--
--	return res;
-+	qman_delete_cgr((struct qman_cgr *)p);
- }
- 
- void qman_delete_cgr_safe(struct qman_cgr *cgr)
- {
--	struct task_struct *thread;
--	struct cgr_comp cgr_comp;
--
- 	preempt_disable();
- 	if (qman_cgr_cpus[cgr->cgrid] != smp_processor_id()) {
--		init_completion(&cgr_comp.completion);
--		cgr_comp.cgr = cgr;
--		thread = kthread_create(qman_delete_cgr_thread, &cgr_comp,
--					"cgr_del");
--
--		if (likely(!IS_ERR(thread))) {
--			kthread_bind(thread, qman_cgr_cpus[cgr->cgrid]);
--			wake_up_process(thread);
--			wait_for_completion(&cgr_comp.completion);
--			preempt_enable();
--			return;
--		}
-+		smp_call_function_single(qman_cgr_cpus[cgr->cgrid],
-+					 qman_delete_cgr_smp_call, cgr, true);
-+		preempt_enable();
-+		return;
- 	}
- 	qman_delete_cgr(cgr);
- 	preempt_enable();
diff --git a/target/linux/layerscape/patches-5.4/701-net-0106-sdk_fman-avoid-array-overflow-error-in-fman-port-ini.patch b/target/linux/layerscape/patches-5.4/701-net-0106-sdk_fman-avoid-array-overflow-error-in-fman-port-ini.patch
deleted file mode 100644
index 4490bc322c..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0106-sdk_fman-avoid-array-overflow-error-in-fman-port-ini.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 5dc04d9dc9ac5d6eca6f1602a7b1c3b5a61625f4 Mon Sep 17 00:00:00 2001
-From: Florinel Iordache <florinel.iordache@nxp.com>
-Date: Mon, 4 Feb 2019 09:45:54 +0200
-Subject: [PATCH] sdk_fman: avoid array overflow error in fman port init
-
-Perform a verification of external buffer pools used which can cause array
-overflow error in port init function SetExtBufferPools() if it was set to
-value 1 via fman port API
-
-Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c
-@@ -581,7 +581,8 @@ static t_Error SetExtBufferPools(t_FmPor
-     p_FmPort->rxPoolsParams.numOfPools = p_ExtBufPools->numOfPoolsUsed;
-     p_FmPort->rxPoolsParams.largestBufSize =
-             sizesArray[orderedArray[p_ExtBufPools->numOfPoolsUsed - 1]];
--    p_FmPort->rxPoolsParams.secondLargestBufSize =
-+    if (p_ExtBufPools->numOfPoolsUsed > 1)
-+        p_FmPort->rxPoolsParams.secondLargestBufSize =
-             sizesArray[orderedArray[p_ExtBufPools->numOfPoolsUsed - 2]];
- 
-     /* FMBM_RMPD reg. - pool depletion */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0107-fsl_qbman-Adjust-platform-device-creation-for-QMan-p.patch b/target/linux/layerscape/patches-5.4/701-net-0107-fsl_qbman-Adjust-platform-device-creation-for-QMan-p.patch
deleted file mode 100644
index cd81c007c1..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0107-fsl_qbman-Adjust-platform-device-creation-for-QMan-p.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From fddd729bd2150e83365528cefb9f1fef581e04c5 Mon Sep 17 00:00:00 2001
-From: Vakul Garg <vakul.garg@nxp.com>
-Date: Sun, 6 Jan 2019 19:05:37 +0530
-Subject: [PATCH] fsl_qbman: Adjust platform device creation for QMan portals
-
-Fix the platform device creation in QMan portals such that
-dma mappings are done properly.
-
-Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
----
- drivers/staging/fsl_qbman/qman_high.c | 47 +++++++++++++++++++----------------
- 1 file changed, 25 insertions(+), 22 deletions(-)
-
---- a/drivers/staging/fsl_qbman/qman_high.c
-+++ b/drivers/staging/fsl_qbman/qman_high.c
-@@ -575,6 +575,7 @@ struct qman_portal *qman_create_portal(
- 	char buf[16];
- 	int ret;
- 	u32 isdr;
-+	struct platform_device_info pdev_info;
- 
- 	if (!portal) {
- 		portal = kmalloc(sizeof(*portal), GFP_KERNEL);
-@@ -671,27 +672,22 @@ struct qman_portal *qman_create_portal(
- 	portal->dqrr_disable_ref = 0;
- 	portal->cb_dc_ern = NULL;
- 	sprintf(buf, "qportal-%d", config->public_cfg.channel);
--	portal->pdev = platform_device_alloc(buf, -1);
-+
-+	memset(&pdev_info, 0, sizeof(pdev_info));
-+	pdev_info.name = buf;
-+	pdev_info.id = PLATFORM_DEVID_NONE;
-+	pdev_info.dma_mask = DMA_BIT_MASK(40);
-+
-+	portal->pdev = platform_device_register_full(&pdev_info);
- 	if (!portal->pdev) {
- 		pr_err("qman_portal - platform_device_alloc() failed\n");
--		goto fail_devalloc;
--	}
--#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
--	portal->pdev->dev.coherent_dma_mask = DMA_BIT_MASK(40);
--	portal->pdev->dev.dma_mask = &portal->pdev->dev.coherent_dma_mask;
--#else
--	if (dma_set_mask(&portal->pdev->dev, DMA_BIT_MASK(40))) {
--		pr_err("qman_portal - dma_set_mask() failed\n");
--		goto fail_devadd;
-+		goto fail_devregister;
- 	}
--#endif
-+
-+	arch_setup_dma_ops(&portal->pdev->dev, 0, 0, NULL, true);
-+
- 	portal->pdev->dev.pm_domain = &qman_portal_device_pm_domain;
- 	portal->pdev->dev.platform_data = portal;
--	ret = platform_device_add(portal->pdev);
--	if (ret) {
--		pr_err("qman_portal - platform_device_add() failed\n");
--		goto fail_devadd;
--	}
- 	dpa_rbtree_init(&portal->retire_table);
- 	isdr = 0xffffffff;
- 	qm_isr_disable_write(__p, isdr);
-@@ -751,10 +747,8 @@ fail_eqcr_empty:
- fail_affinity:
- 	free_irq(config->public_cfg.irq, portal);
- fail_irq:
--	platform_device_del(portal->pdev);
--fail_devadd:
--	platform_device_put(portal->pdev);
--fail_devalloc:
-+	platform_device_unregister(portal->pdev);
-+fail_devregister:
- 	if (num_ceetms)
- 		for (ret = 0; ret < num_ceetms; ret++)
- 			kfree(portal->ccgrs[ret]);
-@@ -852,8 +846,7 @@ void qman_destroy_portal(struct qman_por
- 	qm_dqrr_finish(&qm->p);
- 	qm_eqcr_finish(&qm->p);
- 
--	platform_device_del(qm->pdev);
--	platform_device_put(qm->pdev);
-+	platform_device_unregister(qm->pdev);
- 
- 	qm->config = NULL;
- 	if (qm->alloced)
-@@ -1809,6 +1802,16 @@ int qman_init_fq(struct qman_fq *fq, u32
- 		} else {
- 			phys_fq = dma_map_single(&p->pdev->dev, fq, sizeof(*fq),
- 						DMA_TO_DEVICE);
-+			if (dma_mapping_error(&p->pdev->dev, phys_fq)) {
-+				dev_err(&p->pdev->dev,
-+					"dma_map_single failed for fqid: %u\n",
-+					fq->fqid);
-+				FQUNLOCK(fq);
-+				PORTAL_IRQ_UNLOCK(p, irqflags);
-+				put_affine_portal();
-+				return -EIO;
-+			}
-+
- 			qm_fqd_stashing_set64(&mcc->initfq.fqd, phys_fq);
- 		}
- 	}
diff --git a/target/linux/layerscape/patches-5.4/701-net-0108-sdk_dpaa-ls1043a-errata-impose-S-G-frame-realignment.patch b/target/linux/layerscape/patches-5.4/701-net-0108-sdk_dpaa-ls1043a-errata-impose-S-G-frame-realignment.patch
deleted file mode 100644
index 8de280212f..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0108-sdk_dpaa-ls1043a-errata-impose-S-G-frame-realignment.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From bfc02cc199dc6259c2f4e2af8f77c88fe8ba4cc5 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 5 Mar 2019 11:55:54 +0200
-Subject: [PATCH] sdk_dpaa: ls1043a errata: impose S/G frame realignment
-
-Scatter/Gather frames are not support on LS1043A beacuse they trigger
-the A010022 errata.
-
-Even though we do not advertise S/G support to the stack, we need to
-make sure that if S/G frames do reach the driver somehow, they trigger
-the errata workaround.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h |  7 ++++---
- .../net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c  | 23 +++++-----------------
- 2 files changed, 9 insertions(+), 21 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-@@ -653,9 +653,10 @@ static inline void _dpa_bp_free_pf(void
- 
- /* LS1043A SoC has a HW issue regarding FMan DMA transactions; The issue
-  * manifests itself at high traffic rates when frames cross 4K memory
-- * boundaries or when they are not aligned to 16 bytes; For the moment, we
-- * use a SW workaround that realigns frames to 256 bytes. Scatter/Gather
-- * frames aren't supported on egress.
-+ * boundaries, when they are not aligned to 16 bytes or when they have
-+ * Scatter/Gather fragments; For the moment, we use a SW workaround that
-+ * realigns frames to 256 bytes. Scatter/Gather frames aren't supported
-+ * on egress.
-  */
- 
- #ifndef CONFIG_PPC
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -772,18 +772,19 @@ EXPORT_SYMBOL(skb_to_contig_fd);
- 
- #ifndef CONFIG_PPC
- /* Verify the conditions that trigger the A010022 errata: data unaligned to
-- * 16 bytes and 4K memory address crossings.
-+ * 16 bytes, 4K memory address crossings and S/G fragments.
-  */
- static bool a010022_check_skb(struct sk_buff *skb, struct dpa_priv_s *priv)
- {
--	int nr_frags, i = 0;
--	skb_frag_t *frag;
--
- 	/* Check if the headroom is aligned */
- 	if (((uintptr_t)skb->data - priv->tx_headroom) %
- 	    priv->buf_layout[TX].data_align != 0)
- 		return true;
- 
-+	/* Check for paged data in the skb. We do not support S/G fragments */
-+	if (skb_is_nonlinear(skb))
-+		return true;
-+
- 	/* Check if the headroom crosses a boundary */
- 	if (HAS_DMA_ISSUE(skb->head, skb_headroom(skb)))
- 		return true;
-@@ -796,20 +797,6 @@ static bool a010022_check_skb(struct sk_
- 	if (HAS_DMA_ISSUE(skb->head, skb_end_offset(skb)))
- 		return true;
- 
--	nr_frags = skb_shinfo(skb)->nr_frags;
--
--	while (i < nr_frags) {
--		frag = &skb_shinfo(skb)->frags[i];
--
--		/* Check if a paged fragment crosses a boundary from its
--		 * offset to its end.
--		 */
--		if (HAS_DMA_ISSUE(frag->page_offset, frag->size))
--			return true;
--
--		i++;
--	}
--
- 	return false;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0109-sdk_dpaa-remove-the-QM_FQCTRL_PREFERINCACHE-flag.patch b/target/linux/layerscape/patches-5.4/701-net-0109-sdk_dpaa-remove-the-QM_FQCTRL_PREFERINCACHE-flag.patch
deleted file mode 100644
index e96f873ea9..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0109-sdk_dpaa-remove-the-QM_FQCTRL_PREFERINCACHE-flag.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 3cf2ff1c53b41c60fcb7667a11c4947fe5136de7 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Thu, 7 Mar 2019 16:33:37 +0200
-Subject: [PATCH] sdk_dpaa: remove the QM_FQCTRL_PREFERINCACHE flag
-
-Only a limited number of FQs can be in the cache, setting the
-QM_FQCTRL_PREFERINCACHE flag for all FQs is not useful.
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
-@@ -1237,8 +1237,6 @@ int dpa_fq_init(struct dpa_fq *dpa_fq, b
- 		memset(&initfq, 0, sizeof(initfq));
- 
- 		initfq.we_mask = QM_INITFQ_WE_FQCTRL;
--		/* FIXME: why would we want to keep an empty FQ in cache? */
--		initfq.fqd.fq_ctrl = QM_FQCTRL_PREFERINCACHE;
- 
- 		/* Try to reduce the number of portal interrupts for
- 		 * Tx Confirmation FQs.
diff --git a/target/linux/layerscape/patches-5.4/701-net-0110-sdk_dpaa-adapt-to-kernel-5.1.0-rc1.patch b/target/linux/layerscape/patches-5.4/701-net-0110-sdk_dpaa-adapt-to-kernel-5.1.0-rc1.patch
deleted file mode 100644
index 72fa196479..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0110-sdk_dpaa-adapt-to-kernel-5.1.0-rc1.patch
+++ /dev/null
@@ -1,165 +0,0 @@
-From 68b77d267414d790e5cbd76f46a77501559e5748 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 26 Mar 2019 18:27:11 +0200
-Subject: [PATCH] sdk_dpaa: adapt to kernel 5.1.0 rc1
-
-Apply fixes corresponding to the following upstream patches:
-3c1bcc8 net: ethernet: Convert phydev advertize and supported from u32 to link mode
-1e562c8 ptp_qoriq: make structure/function names more consistent
-70814e8 net: ethernet: Add helper for set_pauseparam for Asym Pause
-22b7d29 net: ethernet: Add helper to determine if pause configuration is supported
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c | 31 +++-------------------
- drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c  | 27 +++++++++----------
- 2 files changed, 16 insertions(+), 42 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c
-@@ -225,7 +225,6 @@ static int __cold dpa_set_pauseparam(str
- 	struct mac_device       *mac_dev;
- 	struct phy_device       *phy_dev;
- 	int _errno;
--	u32 newadv, oldadv;
- 	bool rx_pause, tx_pause;
- 
- 	priv = netdev_priv(net_dev);
-@@ -242,9 +241,7 @@ static int __cold dpa_set_pauseparam(str
- 		return -ENODEV;
- 	}
- 
--	if (!(phy_dev->supported & SUPPORTED_Pause) ||
--			(!(phy_dev->supported & SUPPORTED_Asym_Pause) &&
--			(epause->rx_pause != epause->tx_pause)))
-+	if (!phy_validate_pause(phy_dev, epause))
- 		return -EINVAL;
- 
- 	/* The MAC should know how to handle PAUSE frame autonegotiation before
-@@ -258,29 +255,7 @@ static int __cold dpa_set_pauseparam(str
- 	/* Determine the sym/asym advertised PAUSE capabilities from the desired
- 	 * rx/tx pause settings.
- 	 */
--	newadv = 0;
--	if (epause->rx_pause)
--		newadv = ADVERTISED_Pause | ADVERTISED_Asym_Pause;
--	if (epause->tx_pause)
--		newadv |= ADVERTISED_Asym_Pause;
--
--	oldadv = phy_dev->advertising &
--			(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
--
--	/* If there are differences between the old and the new advertised
--	 * values, restart PHY autonegotiation and advertise the new values.
--	 */
--	if (oldadv != newadv) {
--		phy_dev->advertising &= ~(ADVERTISED_Pause
--				| ADVERTISED_Asym_Pause);
--		phy_dev->advertising |= newadv;
--		if (phy_dev->autoneg) {
--			_errno = phy_start_aneg(phy_dev);
--			if (unlikely(_errno < 0))
--				netdev_err(net_dev, "phy_start_aneg() = %d\n",
--						_errno);
--		}
--	}
-+	phy_set_asym_pause(phy_dev, epause->rx_pause, epause->tx_pause);
- 
- 	get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
- 	_errno = set_mac_active_pause(mac_dev, rx_pause, tx_pause);
-@@ -530,7 +505,7 @@ static int dpaa_get_ts_info(struct net_d
- 	struct device_node *mac_node = dev->of_node;
- 	struct device_node *fman_node = NULL, *ptp_node = NULL;
- 	struct platform_device *ptp_dev = NULL;
--	struct qoriq_ptp *ptp = NULL;
-+	struct ptp_qoriq *ptp = NULL;
- 
- 	info->phc_index = -1;
- 
---- a/drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c
-@@ -385,11 +385,7 @@ void get_pause_cfg(struct mac_device *ma
- 	 */
- 
- 	/* get local capabilities */
--	lcl_adv = 0;
--	if (phy_dev->advertising & ADVERTISED_Pause)
--		lcl_adv |= ADVERTISE_PAUSE_CAP;
--	if (phy_dev->advertising & ADVERTISED_Asym_Pause)
--		lcl_adv |= ADVERTISE_PAUSE_ASYM;
-+	lcl_adv = linkmode_adv_to_lcl_adv_t(phy_dev->advertising);
- 
- 	/* get link partner capabilities */
- 	rmt_adv = 0;
-@@ -439,6 +435,7 @@ static int dtsec_init_phy(struct net_dev
- 			  struct mac_device *mac_dev)
- {
- 	struct phy_device	*phy_dev;
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
- 
- 	if (of_phy_is_fixed_link(mac_dev->phy_node))
- 		phy_dev = of_phy_attach(net_dev, mac_dev->phy_node,
-@@ -455,12 +452,12 @@ static int dtsec_init_phy(struct net_dev
- 	}
- 
- 	/* Remove any features not supported by the controller */
--	phy_dev->supported &= mac_dev->if_support;
-+	ethtool_convert_legacy_u32_to_link_mode(mask, mac_dev->if_support);
-+	linkmode_and(phy_dev->supported, phy_dev->supported, mask);
- 	/* Enable the symmetric and asymmetric PAUSE frame advertisements,
- 	 * as most of the PHY drivers do not enable them by default.
- 	 */
--	phy_dev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
--	phy_dev->advertising = phy_dev->supported;
-+	phy_support_asym_pause(phy_dev);
- 
- 	mac_dev->phy_dev = phy_dev;
- 
-@@ -471,6 +468,7 @@ static int xgmac_init_phy(struct net_dev
- 			  struct mac_device *mac_dev)
- {
- 	struct phy_device *phy_dev;
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
- 
- 	if (of_phy_is_fixed_link(mac_dev->phy_node))
- 		phy_dev = of_phy_attach(net_dev, mac_dev->phy_node,
-@@ -486,12 +484,12 @@ static int xgmac_init_phy(struct net_dev
- 		return phy_dev == NULL ? -ENODEV : PTR_ERR(phy_dev);
- 	}
- 
--	phy_dev->supported &= mac_dev->if_support;
-+	ethtool_convert_legacy_u32_to_link_mode(mask, mac_dev->if_support);
-+	linkmode_and(phy_dev->supported, phy_dev->supported, mask);
- 	/* Enable the symmetric and asymmetric PAUSE frame advertisements,
- 	 * as most of the PHY drivers do not enable them by default.
- 	 */
--	phy_dev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
--	phy_dev->advertising = phy_dev->supported;
-+	phy_support_asym_pause(phy_dev);
- 
- 	mac_dev->phy_dev = phy_dev;
- 
-@@ -502,6 +500,7 @@ static int memac_init_phy(struct net_dev
- 			  struct mac_device *mac_dev)
- {
- 	struct phy_device       *phy_dev;
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
- 	void (*adjust_link_handler)(struct net_device *);
- 
- 	if ((macdev2enetinterface(mac_dev) == e_ENET_MODE_XGMII_10000) ||
-@@ -547,12 +546,12 @@ static int memac_init_phy(struct net_dev
- 	}
- 
- 	/* Remove any features not supported by the controller */
--	phy_dev->supported &= mac_dev->if_support;
-+	ethtool_convert_legacy_u32_to_link_mode(mask, mac_dev->if_support);
-+	linkmode_and(phy_dev->supported, phy_dev->supported, mask);
- 	/* Enable the symmetric and asymmetric PAUSE frame advertisements,
- 	 * as most of the PHY drivers do not enable them by default.
- 	 */
--	phy_dev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
--	phy_dev->advertising = phy_dev->supported;
-+	phy_support_asym_pause(phy_dev);
- 
- 	mac_dev->phy_dev = phy_dev;
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0111-sdk_qbman-Avoid-variable-length-array-in-USDPAA.patch b/target/linux/layerscape/patches-5.4/701-net-0111-sdk_qbman-Avoid-variable-length-array-in-USDPAA.patch
deleted file mode 100644
index 39cfc2d0be..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0111-sdk_qbman-Avoid-variable-length-array-in-USDPAA.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 0ad840e46732e95df274a84b042dcb210be9f946 Mon Sep 17 00:00:00 2001
-From: Roy Pledge <roy.pledge@nxp.com>
-Date: Thu, 28 Mar 2019 09:56:35 -0400
-Subject: [PATCH] sdk_qbman: Avoid variable length array in USDPAA
-
-As of Linux 5.0 variable length arrays on the stack are no
-longer allowed. Change to a dynamic array and create a common
-exit point in the function for cleanup.
-
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
----
- drivers/staging/fsl_qbman/fsl_usdpaa.c | 36 +++++++++++++++++-----------------
- 1 file changed, 18 insertions(+), 18 deletions(-)
-
---- a/drivers/staging/fsl_qbman/fsl_usdpaa.c
-+++ b/drivers/staging/fsl_qbman/fsl_usdpaa.c
-@@ -559,6 +559,7 @@ static bool check_portal_channel(void *c
- 
- static int usdpaa_release(struct inode *inode, struct file *filp)
- {
-+	int err = 0;
- 	struct ctx *ctx = filp->private_data;
- 	struct mem_mapping *map, *tmpmap;
- 	struct portal_mapping *portal, *tmpportal;
-@@ -569,9 +570,14 @@ static int usdpaa_release(struct inode *
- 	struct qm_portal_config *qm_alloced_portal = NULL;
- 	struct bm_portal_config *bm_alloced_portal = NULL;
- 
--	struct qm_portal *portal_array[qman_portal_max];
-+	struct qm_portal **portal_array;
- 	int portal_count = 0;
- 
-+	portal_array = kmalloc_array(qman_portal_max,
-+				     sizeof(struct qm_portal *), GFP_KERNEL);
-+	if (!portal_array)
-+		return -ENOMEM;
-+
- 	/* Ensure the release operation cannot be migrated to another
- 	   CPU as CPU specific variables may be needed during cleanup */
- #ifdef CONFIG_PREEMPT_RT_FULL
-@@ -612,18 +618,14 @@ static int usdpaa_release(struct inode *
- 		qm_alloced_portal = qm_get_unused_portal();
- 		if (!qm_alloced_portal) {
- 			pr_crit("No QMan portal avalaible for cleanup\n");
--#ifdef CONFIG_PREEMPT_RT_FULL
--			migrate_enable();
--#endif
--			return -1;
-+			err = -1;
-+			goto done;
- 		}
- 		qm_cleanup_portal = kmalloc(sizeof(struct qm_portal),
- 					    GFP_KERNEL);
- 		if (!qm_cleanup_portal) {
--#ifdef CONFIG_PREEMPT_RT_FULL
--			migrate_enable();
--#endif
--			return -ENOMEM;
-+			err = -ENOMEM;
-+			goto done;
- 		}
- 		init_qm_portal(qm_alloced_portal, qm_cleanup_portal);
- 		portal_array[portal_count] = qm_cleanup_portal;
-@@ -633,18 +635,14 @@ static int usdpaa_release(struct inode *
- 		bm_alloced_portal = bm_get_unused_portal();
- 		if (!bm_alloced_portal) {
- 			pr_crit("No BMan portal avalaible for cleanup\n");
--#ifdef CONFIG_PREEMPT_RT_FULL
--			migrate_enable();
--#endif
--			return -1;
-+			err = -1;
-+			goto done;
- 		}
- 		bm_cleanup_portal = kmalloc(sizeof(struct bm_portal),
- 					    GFP_KERNEL);
- 		if (!bm_cleanup_portal) {
--#ifdef CONFIG_PREEMPT_RT_FULL
--			migrate_enable();
--#endif
--			return -ENOMEM;
-+			err = -ENOMEM;
-+			goto done;
- 		}
- 		init_bm_portal(bm_alloced_portal, bm_cleanup_portal);
- 	}
-@@ -721,10 +719,12 @@ static int usdpaa_release(struct inode *
- 	}
- 
- 	kfree(ctx);
-+done:
- #ifdef CONFIG_PREEMPT_RT_FULL
- 	migrate_enable();
- #endif
--	return 0;
-+	kfree(portal_array);
-+	return err;
- }
- 
- static int check_mmap_dma(struct ctx *ctx, struct vm_area_struct *vma,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0112-sdk_dpaa-Rework-QBMan-portal-mappings.patch b/target/linux/layerscape/patches-5.4/701-net-0112-sdk_dpaa-Rework-QBMan-portal-mappings.patch
deleted file mode 100644
index 1752d1e304..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0112-sdk_dpaa-Rework-QBMan-portal-mappings.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From d0e3e315f49a0a35c7e0bdae934f33ee6b3042a0 Mon Sep 17 00:00:00 2001
-From: Roy Pledge <roy.pledge@nxp.com>
-Date: Wed, 1 May 2019 16:08:53 -0400
-Subject: [PATCH] sdk_dpaa: Rework QBMan portal mappings
-
-Rework the QBMan portal mappings in the SDK driver to
-match the mechanism used in the upstream varient.
-
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
----
- drivers/staging/fsl_qbman/bman_driver.c | 16 ++++++++--------
- drivers/staging/fsl_qbman/qman_driver.c | 17 +++++++++--------
- 2 files changed, 17 insertions(+), 16 deletions(-)
-
---- a/drivers/staging/fsl_qbman/bman_driver.c
-+++ b/drivers/staging/fsl_qbman/bman_driver.c
-@@ -199,14 +199,14 @@ static struct bm_portal_config * __init
-                                 resource_size(&pcfg->addr_phys[DPA_PORTAL_CI]));
- 
- #else
--	pcfg->addr_virt[DPA_PORTAL_CE] = ioremap_prot(
--				pcfg->addr_phys[DPA_PORTAL_CE].start,
--				(unsigned long)len,
--				0);
--	pcfg->addr_virt[DPA_PORTAL_CI] = ioremap_prot(
--				pcfg->addr_phys[DPA_PORTAL_CI].start,
--				resource_size(&pcfg->addr_phys[DPA_PORTAL_CI]),
--				_PAGE_GUARDED | _PAGE_NO_CACHE);
-+	pcfg->addr_virt[DPA_PORTAL_CE] =
-+		memremap(pcfg->addr_phys[DPA_PORTAL_CE].start,
-+			 (unsigned long)len, MEMREMAP_WB);
-+
-+	pcfg->addr_virt[DPA_PORTAL_CI] =
-+		ioremap(pcfg->addr_phys[DPA_PORTAL_CI].start,
-+			resource_size(&pcfg->addr_phys[DPA_PORTAL_CI]));
-+
- #endif
- 	/* disable bp depletion */
- 	__raw_writel(0x0, pcfg->addr_virt[DPA_PORTAL_CI] + BM_REG_SCN(0));
---- a/drivers/staging/fsl_qbman/qman_driver.c
-+++ b/drivers/staging/fsl_qbman/qman_driver.c
-@@ -459,14 +459,15 @@ static struct qm_portal_config * __init
-                                 pcfg->addr_phys[DPA_PORTAL_CI].start,
-                                 resource_size(&pcfg->addr_phys[DPA_PORTAL_CI]));
- #else
--	pcfg->addr_virt[DPA_PORTAL_CE] = ioremap_prot(
--				pcfg->addr_phys[DPA_PORTAL_CE].start,
--				(unsigned long)len,
--				0);
--	pcfg->addr_virt[DPA_PORTAL_CI] = ioremap_prot(
--				pcfg->addr_phys[DPA_PORTAL_CI].start,
--				resource_size(&pcfg->addr_phys[DPA_PORTAL_CI]),
--				_PAGE_GUARDED | _PAGE_NO_CACHE);
-+
-+	pcfg->addr_virt[DPA_PORTAL_CE] =
-+		memremap(pcfg->addr_phys[DPA_PORTAL_CE].start,
-+			 (unsigned long)len, MEMREMAP_WB);
-+
-+	pcfg->addr_virt[DPA_PORTAL_CI] =
-+		ioremap(pcfg->addr_phys[DPA_PORTAL_CI].start,
-+			resource_size(&pcfg->addr_phys[DPA_PORTAL_CI]));
-+
- #endif
- 	return pcfg;
- err:
diff --git a/target/linux/layerscape/patches-5.4/701-net-0113-sdk_qbman-Fix-error-in-IP-revision-comparison.patch b/target/linux/layerscape/patches-5.4/701-net-0113-sdk_qbman-Fix-error-in-IP-revision-comparison.patch
deleted file mode 100644
index e2cd46a9c4..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0113-sdk_qbman-Fix-error-in-IP-revision-comparison.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From e180239ef07855f44f3bab4cfa5ac47c6775d822 Mon Sep 17 00:00:00 2001
-From: Roy Pledge <roy.pledge@nxp.com>
-Date: Mon, 6 May 2019 11:18:57 -0400
-Subject: [PATCH] sdk_qbman: Fix error in IP revision comparison
-
-The comparison for QMAN_REV31 was incorrect as it
-would always fail due to the wrong mask.
-
-This fixes the following error in newer GCC versions:
-"error: bitwise comparison always evaluates to false
-	[-Werror=tautological-compare]"
-
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
----
- drivers/staging/fsl_qbman/qman_config.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/staging/fsl_qbman/qman_config.c
-+++ b/drivers/staging/fsl_qbman/qman_config.c
-@@ -812,7 +812,7 @@ int qman_set_sdest(u16 channel, unsigned
- 
- 	if (!qman_have_ccsr())
- 		return -ENODEV;
--	if ((qman_ip_rev & 0xFF00) == QMAN_REV31) {
-+	if ((qman_ip_rev & 0xFFFF) == QMAN_REV31) {
- 		/* LS1043A - only one L2 cache */
- 		cpu_idx = 0;
- 	}
diff --git a/target/linux/layerscape/patches-5.4/701-net-0114-sdk_dpaa-SGMII-2500-needs-AN-disabled.patch b/target/linux/layerscape/patches-5.4/701-net-0114-sdk_dpaa-SGMII-2500-needs-AN-disabled.patch
deleted file mode 100644
index b986d3517a..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0114-sdk_dpaa-SGMII-2500-needs-AN-disabled.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From e36f12a1d319b53d5f52b91671188a74e0a1fb41 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Tue, 23 Apr 2019 16:38:19 +0300
-Subject: [PATCH] sdk_dpaa: SGMII 2500 needs AN disabled
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- .../ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.c | 14 ++++++++++----
- .../ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.h |  1 +
- 2 files changed, 11 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.c
-@@ -84,6 +84,7 @@ static void SetupSgmiiInternalPhy(t_Mema
- {
-     uint16_t    tmpReg16;
-     e_EnetMode  enetMode;
-+    bool autoneg_disabled = p_Memac->enetMode == e_ENET_MODE_SGMII_2500;
- 
-      /* In case the higher MACs are used (i.e. the MACs that should support 10G),
-         speed=10000 is provided for SGMII ports. Temporary modify enet mode
-@@ -92,8 +93,9 @@ static void SetupSgmiiInternalPhy(t_Mema
- 
-     /* SGMII mode + AN enable */
-     tmpReg16 = PHY_SGMII_IF_MODE_AN | PHY_SGMII_IF_MODE_SGMII;
--    if ((p_Memac->enetMode) == e_ENET_MODE_SGMII_2500)
--        tmpReg16 = PHY_SGMII_CR_PHY_RESET | PHY_SGMII_IF_SPEED_GIGABIT | PHY_SGMII_IF_MODE_SGMII;
-+    /* unless SGMII 2500 where AN needs to be disabled  */
-+    if (autoneg_disabled)
-+        tmpReg16 = PHY_SGMII_IF_SPEED_GIGABIT | PHY_SGMII_IF_MODE_SGMII;
- 
-     p_Memac->enetMode = MAKE_ENET_MODE(ENET_INTERFACE_FROM_MODE(p_Memac->enetMode), e_ENET_SPEED_1000);
-     MEMAC_MII_WritePhyReg(p_Memac, phyAddr, 0x14, tmpReg16);
-@@ -116,8 +118,12 @@ static void SetupSgmiiInternalPhy(t_Mema
-     MEMAC_MII_WritePhyReg(p_Memac, phyAddr, 0x13, 0x0007);
-     MEMAC_MII_WritePhyReg(p_Memac, phyAddr, 0x12, 0xa120);
- 
--    /* Restart AN */
--    tmpReg16 = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN;
-+    if (!autoneg_disabled)
-+        /* Restart AN */
-+        tmpReg16 = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN;
-+    else
-+        /* Disable AN */
-+        tmpReg16 = PHY_SGMII_CR_DEF_VAL & ~PHY_SGMII_CR_AN_EN;
-     MEMAC_MII_WritePhyReg(p_Memac, phyAddr, 0x0, tmpReg16);
- 
-     /* Restore original enet mode */
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.h
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.h
-@@ -93,6 +93,7 @@ typedef struct
- #define PHY_SGMII_CR_PHY_RESET          0x8000
- #define PHY_SGMII_CR_RESET_AN           0x0200
- #define PHY_SGMII_CR_DEF_VAL            0x1140
-+#define PHY_SGMII_CR_AN_EN              0x1000
- #define PHY_SGMII_DEV_ABILITY_SGMII     0x4001
- #define PHY_SGMII_DEV_ABILITY_1000X     0x01A0
- #define PHY_SGMII_IF_SPEED_GIGABIT	0x0008
diff --git a/target/linux/layerscape/patches-5.4/701-net-0115-sdk_qbman-Update-cpus_allowed-to-cpus_mask-to-cope-w.patch b/target/linux/layerscape/patches-5.4/701-net-0115-sdk_qbman-Update-cpus_allowed-to-cpus_mask-to-cope-w.patch
deleted file mode 100644
index 900747b3f3..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0115-sdk_qbman-Update-cpus_allowed-to-cpus_mask-to-cope-w.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 0bd330ec1fd657b5d04f0ab668b9fbaf7473fe8c Mon Sep 17 00:00:00 2001
-From: Li Yang <leoyang.li@nxp.com>
-Date: Tue, 11 Jun 2019 18:51:31 -0500
-Subject: [PATCH] sdk_qbman: Update cpus_allowed to cpus_mask to cope with
- upstream change
-
-Signed-off-by: Li Yang <leoyang.li@nxp.com>
----
- drivers/staging/fsl_qbman/fsl_usdpaa_irq.c | 4 ++--
- drivers/staging/fsl_qbman/qman_driver.c    | 2 +-
- 2 files changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/staging/fsl_qbman/fsl_usdpaa_irq.c
-+++ b/drivers/staging/fsl_qbman/fsl_usdpaa_irq.c
-@@ -145,11 +145,11 @@ static int map_irq(struct file *fp, stru
- 		fput(ctx->usdpaa_filp);
- 		return ret;
- 	}
--	ret = irq_set_affinity(ctx->irq_num, &current->cpus_allowed);
-+	ret = irq_set_affinity(ctx->irq_num, &current->cpus_mask);
- 	if (ret)
- 		pr_err("USDPAA irq_set_affinity() failed, ret= %d\n", ret);
- 
--	ret = irq_set_affinity_hint(ctx->irq_num, &current->cpus_allowed);
-+	ret = irq_set_affinity_hint(ctx->irq_num, &current->cpus_mask);
- 	if (ret)
- 		pr_err("USDPAA irq_set_affinity_hint() failed, ret= %d\n", ret);
- 
---- a/drivers/staging/fsl_qbman/qman_driver.c
-+++ b/drivers/staging/fsl_qbman/qman_driver.c
-@@ -646,7 +646,7 @@ static struct qman_portal *init_pcfg(str
- static void init_slave(int cpu)
- {
- 	struct qman_portal *p;
--	struct cpumask oldmask = current->cpus_allowed;
-+	struct cpumask oldmask = current->cpus_mask;
- 	set_cpus_allowed_ptr(current, get_cpu_mask(cpu));
- 	p = qman_create_affine_slave(shared_portals[shared_portals_idx++], cpu);
- 	if (!p)
diff --git a/target/linux/layerscape/patches-5.4/701-net-0116-sdk_dpaa-ceetm-align-to-upstream-API-changes.patch b/target/linux/layerscape/patches-5.4/701-net-0116-sdk_dpaa-ceetm-align-to-upstream-API-changes.patch
deleted file mode 100644
index c96a8f41ba..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0116-sdk_dpaa-ceetm-align-to-upstream-API-changes.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 17a9864b376f8ad0e19736ce53a3d7798679a0b8 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 3 Jul 2019 15:27:01 +0300
-Subject: [PATCH] sdk_dpaa: ceetm: align to upstream API changes
-
-Align to the following upstream patches:
-8cb0817 netlink: make validation more configurable for future strictness
-ae0be8d netlink: make nla_nest_start() add NLA_F_NESTED flag
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -650,7 +650,7 @@ static int ceetm_dump(struct Qdisc *sch,
- 		return -EINVAL;
- 	}
- 
--	nest = nla_nest_start(skb, TCA_OPTIONS);
-+	nest = nla_nest_start_noflag(skb, TCA_OPTIONS);
- 	if (!nest)
- 		goto nla_put_failure;
- 	if (nla_put(skb, TCA_CEETM_QOPS, sizeof(qopt), &qopt))
-@@ -1133,7 +1133,7 @@ static int ceetm_init(struct Qdisc *sch,
- 	if (ret)
- 		return ret;
- 
--	ret = nla_parse_nested(tb, TCA_CEETM_QOPS, opt, ceetm_policy, NULL);
-+	ret = nla_parse_nested_deprecated(tb, TCA_CEETM_QOPS, opt, ceetm_policy, NULL);
- 	if (ret < 0) {
- 		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
- 		return ret;
-@@ -1307,7 +1307,7 @@ static int ceetm_change(struct Qdisc *sc
- 
- 	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
- 
--	ret = nla_parse_nested(tb, TCA_CEETM_QOPS, opt, ceetm_policy, NULL);
-+	ret = nla_parse_nested_deprecated(tb, TCA_CEETM_QOPS, opt, ceetm_policy, NULL);
- 	if (ret < 0) {
- 		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
- 		return ret;
-@@ -1527,7 +1527,7 @@ static int ceetm_cls_change(struct Qdisc
- 		return -EINVAL;
- 	}
- 
--	err = nla_parse_nested(tb, TCA_CEETM_COPT, opt, ceetm_policy, NULL);
-+	err = nla_parse_nested_deprecated(tb, TCA_CEETM_COPT, opt, ceetm_policy, NULL);
- 	if (err < 0) {
- 		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
- 		return -EINVAL;
-@@ -1728,7 +1728,7 @@ static int ceetm_cls_dump(struct Qdisc *
- 		break;
- 	}
- 
--	nest = nla_nest_start(skb, TCA_OPTIONS);
-+	nest = nla_nest_start_noflag(skb, TCA_OPTIONS);
- 	if (!nest)
- 		goto nla_put_failure;
- 	if (nla_put(skb, TCA_CEETM_COPT, sizeof(copt), &copt))
diff --git a/target/linux/layerscape/patches-5.4/701-net-0117-dpaa_eth-ERR010022-align-skb_shinfo.patch b/target/linux/layerscape/patches-5.4/701-net-0117-dpaa_eth-ERR010022-align-skb_shinfo.patch
deleted file mode 100644
index fbf1254db3..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0117-dpaa_eth-ERR010022-align-skb_shinfo.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From d640266a4307a4c857b27c90d56c9161dd615bcb Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 22 Jul 2019 14:50:10 +0300
-Subject: [PATCH] dpaa_eth: ERR010022: align skb_shinfo
-
-Cache-line align the new skb's shared info field.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-@@ -2171,7 +2171,7 @@ static struct sk_buff *dpaa_errata_a0100
- 	 * aligned to 256.
- 	 */
- 	headroom = DPAA_A010022_HEADROOM;
--	nsize = headroom + skb->len +
-+	nsize = ALIGN(headroom + skb->len, SMP_CACHE_BYTES) +
- 		SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
- 
- 	/* Reserve enough memory to accommodate Jumbo frames */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0118-dpaa_eth-ERR010022-preserve-timestamping.patch b/target/linux/layerscape/patches-5.4/701-net-0118-dpaa_eth-ERR010022-preserve-timestamping.patch
deleted file mode 100644
index cd4f6f422b..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0118-dpaa_eth-ERR010022-preserve-timestamping.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 2039a9ff462d50251fd800ce4418f76230373783 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 22 Jul 2019 14:50:36 +0300
-Subject: [PATCH] dpaa_eth: ERR010022: preserve timestamping
-
-Maintain all timestamping fields when copying the skb.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-@@ -2196,6 +2196,15 @@ static struct sk_buff *dpaa_errata_a0100
- 	}
- 	skb_copy_header(nskb, skb);
- 
-+	/* Copy relevant timestamp info from the old skb to the new */
-+	if (priv->tx_tstamp) {
-+		skb_shinfo(nskb)->tx_flags = skb_shinfo(skb)->tx_flags;
-+		skb_shinfo(nskb)->hwtstamps = skb_shinfo(skb)->hwtstamps;
-+		skb_shinfo(nskb)->tskey = skb_shinfo(skb)->tskey;
-+		if (skb->sk)
-+			skb_set_owner_w(nskb, skb->sk);
-+	}
-+
- 	/* We move the headroom when we align it so we have to reset the
- 	 * network and transport header offsets relative to the new data
- 	 * pointer. The checksum offload relies on these offsets.
diff --git a/target/linux/layerscape/patches-5.4/701-net-0119-sdk_dpaa-ceetm-update-Makefile-to-use-absolute-inclu.patch b/target/linux/layerscape/patches-5.4/701-net-0119-sdk_dpaa-ceetm-update-Makefile-to-use-absolute-inclu.patch
deleted file mode 100644
index e163f99537..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0119-sdk_dpaa-ceetm-update-Makefile-to-use-absolute-inclu.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 1d862091e7b7f49eb8533c74b6f7de34d6feb56c Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 12 Aug 2019 15:58:07 +0300
-Subject: [PATCH] sdk_dpaa: ceetm: update Makefile to use absolute include
- paths
-
-Explicitly mention the root source tree directory when building. This
-allows the build process to start from a different location.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/Makefile
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/Makefile
-@@ -18,7 +18,7 @@ ifeq ($(CONFIG_FSL_DPAA_1588),y)
- fsl_dpa-objs += dpaa_1588.o
- endif
- ifeq ($(CONFIG_FSL_DPAA_CEETM),y)
--ccflags-y += -Idrivers/net/ethernet/freescale/sdk_fman/src/wrapper
-+ccflags-y += -I$(srctree)/drivers/net/ethernet/freescale/sdk_fman/src/wrapper
- fsl_dpa-objs += dpaa_eth_ceetm.o
- endif
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0120-sdk_dpaa-net-Rename-skb_frag_t-size-to-bv_len.patch b/target/linux/layerscape/patches-5.4/701-net-0120-sdk_dpaa-net-Rename-skb_frag_t-size-to-bv_len.patch
deleted file mode 100644
index 4d22250b94..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0120-sdk_dpaa-net-Rename-skb_frag_t-size-to-bv_len.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 1af9f383a9448da530de9f681e8fccf12435aac8 Mon Sep 17 00:00:00 2001
-From: Li Yang <leoyang.li@nxp.com>
-Date: Tue, 27 Aug 2019 19:03:59 -0500
-Subject: [PATCH] sdk_dpaa: net: Rename skb_frag_t size to bv_len
-
-Update for upstream data structure change similar to
-
-commit b8b576a16f79efbdde49348147f491b176537d88
-Author: Matthew Wilcox (Oracle) <willy@infradead.org>
-Date:   Mon Jul 22 20:08:30 2019 -0700
-
-    net: Rename skb_frag_t size to bv_len
-
-Signed-off-by: Li Yang <leoyang.li@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -960,7 +960,7 @@ int __hot skb_to_sg_fd(struct dpa_priv_s
- 		frag = &skb_shinfo(skb)->frags[i - 1];
- 		qm_sg_entry_set_bpid(&sgt[i], 0xff);
- 		qm_sg_entry_set_offset(&sgt[i], 0);
--		qm_sg_entry_set_len(&sgt[i], frag->size);
-+		qm_sg_entry_set_len(&sgt[i], frag->bv_len);
- 		qm_sg_entry_set_ext(&sgt[i], 0);
- 
- 		if (i == nr_frags)
-@@ -969,7 +969,7 @@ int __hot skb_to_sg_fd(struct dpa_priv_s
- 			qm_sg_entry_set_final(&sgt[i], 0);
- 
- 		DPA_BUG_ON(!skb_frag_page(frag));
--		addr = skb_frag_dma_map(dpa_bp->dev, frag, 0, frag->size,
-+		addr = skb_frag_dma_map(dpa_bp->dev, frag, 0, frag->bv_len,
- 					dma_dir);
- 		if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
- 			dev_err(dpa_bp->dev, "DMA mapping failed");
diff --git a/target/linux/layerscape/patches-5.4/701-net-0121-dpaa_eth-Rename-skb_frag_t-size-to-bv_len.patch b/target/linux/layerscape/patches-5.4/701-net-0121-dpaa_eth-Rename-skb_frag_t-size-to-bv_len.patch
deleted file mode 100644
index c9236871b9..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0121-dpaa_eth-Rename-skb_frag_t-size-to-bv_len.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From e282d30e20d34d8d543866b662fdc16a5499a0ab Mon Sep 17 00:00:00 2001
-From: Li Yang <leoyang.li@nxp.com>
-Date: Sat, 7 Sep 2019 18:29:45 -0500
-Subject: [PATCH] dpaa_eth: Rename skb_frag_t size to bv_len
-
-Signed-off-by: Li Yang <leoyang.li@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-@@ -2141,7 +2141,7 @@ static bool dpaa_errata_a010022_has_dma_
- 		/* Check if a paged fragment crosses a boundary from its
- 		 * offset to its end.
- 		 */
--		if (CROSS_4K_BOUND((uintptr_t)frag->page_offset, frag->size))
-+		if (CROSS_4K_BOUND((uintptr_t)frag->page_offset, frag->bv_len))
- 			return true;
- 
- 		i++;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0122-config-enable-SDK-FMan-driver.patch b/target/linux/layerscape/patches-5.4/701-net-0122-config-enable-SDK-FMan-driver.patch
deleted file mode 100644
index 49cece6fb7..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0122-config-enable-SDK-FMan-driver.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From d6b59a9bf9d88cbfe41b96603824ffffea305b0f Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Fri, 19 May 2017 09:08:36 +0300
-Subject: [PATCH] config: enable SDK FMan driver
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ethernet/freescale/Kconfig
-+++ b/drivers/net/ethernet/freescale/Kconfig
-@@ -97,6 +97,7 @@ config GIANFAR
- 	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
- 	  and MPC86xx family of chips, the eTSEC on LS1021A and the FEC
- 	  on the 8540.
-+source "drivers/net/ethernet/freescale/sdk_fman/Kconfig"
- 
- source "drivers/net/ethernet/freescale/dpaa/Kconfig"
- source "drivers/net/ethernet/freescale/dpaa2/Kconfig"
diff --git a/target/linux/layerscape/patches-5.4/701-net-0123-config-enable-SDK-DPAA-driver.patch b/target/linux/layerscape/patches-5.4/701-net-0123-config-enable-SDK-DPAA-driver.patch
deleted file mode 100644
index 05b1aee807..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0123-config-enable-SDK-DPAA-driver.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From d3d61dea25b1e122353895d8154c2e5f51c11a5a Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Fri, 19 May 2017 09:30:19 +0300
-Subject: [PATCH] config: enable SDK DPAA driver
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/Kconfig
-+++ b/drivers/net/ethernet/freescale/Kconfig
-@@ -98,7 +98,7 @@ config GIANFAR
- 	  and MPC86xx family of chips, the eTSEC on LS1021A and the FEC
- 	  on the 8540.
- source "drivers/net/ethernet/freescale/sdk_fman/Kconfig"
--
-+source "drivers/net/ethernet/freescale/sdk_dpaa/Kconfig"
- source "drivers/net/ethernet/freescale/dpaa/Kconfig"
- source "drivers/net/ethernet/freescale/dpaa2/Kconfig"
- source "drivers/net/ethernet/freescale/enetc/Kconfig"
diff --git a/target/linux/layerscape/patches-5.4/701-net-0124-config-enable-SDK-QBMan.patch b/target/linux/layerscape/patches-5.4/701-net-0124-config-enable-SDK-QBMan.patch
deleted file mode 100644
index 14eb62c4a1..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0124-config-enable-SDK-QBMan.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From b784a6d9b093b7bfd4e47a5b34aac73d1f46b476 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Fri, 19 May 2017 11:35:21 +0300
-Subject: [PATCH] config: enable SDK QBMan
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
-[ Aisheng: fix minor conflcit due to removed vboxsf/Kconfig ]
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- drivers/staging/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/staging/Kconfig
-+++ b/drivers/staging/Kconfig
-@@ -125,4 +125,6 @@ source "drivers/staging/exfat/Kconfig"
- 
- source "drivers/staging/qlge/Kconfig"
- 
-+source "drivers/staging/fsl_qbman/Kconfig"
-+
- endif # STAGING
diff --git a/target/linux/layerscape/patches-5.4/701-net-0125-config-add-SDK-QBMan-driver.patch b/target/linux/layerscape/patches-5.4/701-net-0125-config-add-SDK-QBMan-driver.patch
deleted file mode 100644
index c89ecfabde..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0125-config-add-SDK-QBMan-driver.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-From c9c1e4d58aa598440904280e3261760fa6f0864e Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Fri, 19 May 2017 11:39:25 +0300
-Subject: [PATCH] config: add SDK QBMan driver
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
-[ Aisheng: fix minor conflict due to removed CONFIG_VBOXSF_FS ]
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- drivers/staging/Makefile | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/staging/Makefile
-+++ b/drivers/staging/Makefile
-@@ -53,3 +53,4 @@ obj-$(CONFIG_UWB)		+= uwb/
- obj-$(CONFIG_USB_WUSB)		+= wusbcore/
- obj-$(CONFIG_EXFAT_FS)		+= exfat/
- obj-$(CONFIG_QLGE)		+= qlge/
-+obj-$(CONFIG_FSL_SDK_DPA)      += fsl_qbman/
diff --git a/target/linux/layerscape/patches-5.4/701-net-0126-net-Makefile-re-add-DPAA-SDK-drivers.patch b/target/linux/layerscape/patches-5.4/701-net-0126-net-Makefile-re-add-DPAA-SDK-drivers.patch
deleted file mode 100644
index 9aa4c463e0..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0126-net-Makefile-re-add-DPAA-SDK-drivers.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 67d8e64b7f996a6398ff3aef6834e12540d3f51f Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Fri, 30 Jun 2017 09:19:52 +0300
-Subject: [PATCH] net: Makefile: re-add DPAA SDK drivers
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/Makefile | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/ethernet/freescale/Makefile
-+++ b/drivers/net/ethernet/freescale/Makefile
-@@ -19,6 +19,9 @@ gianfar_driver-objs := gianfar.o \
- obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
- ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o
- 
-+obj-$(if $(CONFIG_FSL_SDK_FMAN),y) += sdk_fman/
-+obj-$(if $(CONFIG_FSL_SDK_DPAA_ETH),y) += sdk_dpaa/
-+
- obj-$(CONFIG_FSL_FMAN) += fman/
- obj-$(CONFIG_FSL_DPAA_ETH) += dpaa/
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0127-ptp-support-ptp_qoriq-for-sdk-dpaa.patch b/target/linux/layerscape/patches-5.4/701-net-0127-ptp-support-ptp_qoriq-for-sdk-dpaa.patch
deleted file mode 100644
index 831b368ad0..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0127-ptp-support-ptp_qoriq-for-sdk-dpaa.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 46b406426b67d869176d4a4b4b321f71f28753dc Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Thu, 17 Jan 2019 14:34:51 +0800
-Subject: [PATCH] ptp: support ptp_qoriq for sdk dpaa
-
-The ptp_qoriq driver could be used for both sdk version
-dpaa driver and upstream version dpaa driver. So added
-sdk dpaa dependency for ptp_qoriq driver.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/ptp/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/ptp/Kconfig
-+++ b/drivers/ptp/Kconfig
-@@ -44,7 +44,7 @@ config PTP_1588_CLOCK_DTE
- 
- config PTP_1588_CLOCK_QORIQ
- 	tristate "Freescale QorIQ 1588 timer as PTP clock"
--	depends on GIANFAR || FSL_DPAA_ETH || FSL_DPAA2_ETH || FSL_ENETC || FSL_ENETC_VF || COMPILE_TEST
-+	depends on GIANFAR || FSL_DPAA_ETH || FSL_SDK_DPAA_ETH || FSL_DPAA2_ETH || FSL_ENETC || FSL_ENETC_VF || COMPILE_TEST
- 	depends on PTP_1588_CLOCK
- 	default y
- 	help
diff --git a/target/linux/layerscape/patches-5.4/701-net-0128-net-dpaa-fix-build-failure-due-to-skb_frag_t-struct-.patch b/target/linux/layerscape/patches-5.4/701-net-0128-net-dpaa-fix-build-failure-due-to-skb_frag_t-struct-.patch
deleted file mode 100644
index 2a6ccab470..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0128-net-dpaa-fix-build-failure-due-to-skb_frag_t-struct-.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From bd9aa7c077105fda307bbc685949d5bb01ed1bd8 Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Sun, 29 Sep 2019 22:38:34 +0800
-Subject: [PATCH] net: dpaa: fix build failure due to skb_frag_t struct change
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-We met below build break due to new kernel change:
-8842d285bafa ("net: Convert skb_frag_t to bio_vec")
-
-../drivers/net/ethernet/freescale/dpaa/dpaa_eth.c: In function ‘dpaa_errata_a010022_has_dma_issue’:
-../drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2137:37: error: ‘skb_frag_t’ has no member named ‘page_offset’
-   if (CROSS_4K_BOUND((uintptr_t)frag->page_offset, frag->bv_len))
-                                     ^
-../drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2105:5: note: in definition of macro ‘CROSS_4K_BOUND’
-  (((start) + (size)) > (((start) + 0x1000) & ~0xFFF))
-     ^
-../drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2137:37: error: ‘skb_frag_t’ has no member named ‘page_offset’
-   if (CROSS_4K_BOUND((uintptr_t)frag->page_offset, frag->bv_len))
-                                     ^
-../drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2105:27: note: in definition of macro ‘CROSS_4K_BOUND’
-  (((start) + (size)) > (((start) + 0x1000) & ~0xFFF))
-
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-@@ -2141,7 +2141,7 @@ static bool dpaa_errata_a010022_has_dma_
- 		/* Check if a paged fragment crosses a boundary from its
- 		 * offset to its end.
- 		 */
--		if (CROSS_4K_BOUND((uintptr_t)frag->page_offset, frag->bv_len))
-+		if (CROSS_4K_BOUND(skb_frag_off(frag), skb_frag_size(frag)))
- 			return true;
- 
- 		i++;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0129-sdk_dpa-align-to-upstream-PHY_INTERFACE_MODE.patch b/target/linux/layerscape/patches-5.4/701-net-0129-sdk_dpa-align-to-upstream-PHY_INTERFACE_MODE.patch
deleted file mode 100644
index 171ef614b6..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0129-sdk_dpa-align-to-upstream-PHY_INTERFACE_MODE.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 3343551eb8a692aafcbf1a7eaf0b79965aa60ba9 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@nxp.com>
-Date: Wed, 16 Oct 2019 11:53:54 +0300
-Subject: [PATCH] sdk_dpa: align to upstream PHY_INTERFACE_MODE
-
-Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/mac.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/mac.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac.c
-@@ -76,7 +76,7 @@ static const char phy_str[][11] = {
- 	[PHY_INTERFACE_MODE_RGMII_TXID]	= "rgmii-txid",
- 	[PHY_INTERFACE_MODE_RTBI]	= "rtbi",
- 	[PHY_INTERFACE_MODE_XGMII]	= "xgmii",
--	[PHY_INTERFACE_MODE_2500SGMII] = "sgmii-2500",
-+	[PHY_INTERFACE_MODE_2500BASEX] = "sgmii-2500",
- };
- 
- static phy_interface_t __pure __attribute__((nonnull)) str2phy(const char *str)
-@@ -103,7 +103,7 @@ static const uint16_t phy2speed[] = {
- 	[PHY_INTERFACE_MODE_RGMII_TXID]	= SPEED_1000,
- 	[PHY_INTERFACE_MODE_RTBI]	= SPEED_1000,
- 	[PHY_INTERFACE_MODE_XGMII]	= SPEED_10000,
--	[PHY_INTERFACE_MODE_2500SGMII] = SPEED_2500,
-+	[PHY_INTERFACE_MODE_2500BASEX] = SPEED_2500,
- };
- 
- static struct mac_device * __cold
diff --git a/target/linux/layerscape/patches-5.4/701-net-0130-bus-fsl-mc-move-fsl_mc_command-struct-in-a-uapi-head.patch b/target/linux/layerscape/patches-5.4/701-net-0130-bus-fsl-mc-move-fsl_mc_command-struct-in-a-uapi-head.patch
deleted file mode 100644
index 5aa85bf51c..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0130-bus-fsl-mc-move-fsl_mc_command-struct-in-a-uapi-head.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From c2939a719ebc7b39453f47ad2d8d30fc06ef4be6 Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Tue, 13 Mar 2018 13:57:00 +0200
-Subject: [PATCH] bus: fsl-mc: move fsl_mc_command struct in a uapi header
-
-Define "struct fsl_mc_command" as a structure that can cross the
-user/kernel boundary.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
----
- MAINTAINERS                 |  2 ++
- include/linux/fsl/mc.h      |  8 +-------
- include/uapi/linux/fsl_mc.h | 25 +++++++++++++++++++++++++
- 3 files changed, 28 insertions(+), 7 deletions(-)
- create mode 100644 include/uapi/linux/fsl_mc.h
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -13438,6 +13438,8 @@ S:	Maintained
- F:	drivers/bus/fsl-mc/
- F:	Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
- F:	Documentation/networking/device_drivers/freescale/dpaa2/overview.rst
-+F:	Documentation/networking/dpaa2/overview.rst
-+F:	include/uapi/linux/fsl_mc.h
- 
- QT1010 MEDIA DRIVER
- M:	Antti Palosaari <crope@iki.fi>
---- a/include/linux/fsl/mc.h
-+++ b/include/linux/fsl/mc.h
-@@ -12,6 +12,7 @@
- #include <linux/device.h>
- #include <linux/mod_devicetable.h>
- #include <linux/interrupt.h>
-+#include <uapi/linux/fsl_mc.h>
- 
- #define FSL_MC_VENDOR_FREESCALE	0x1957
- 
-@@ -199,8 +200,6 @@ struct fsl_mc_device {
- #define to_fsl_mc_device(_dev) \
- 	container_of(_dev, struct fsl_mc_device, dev)
- 
--#define MC_CMD_NUM_OF_PARAMS	7
--
- struct mc_cmd_header {
- 	u8 src_id;
- 	u8 flags_hw;
-@@ -210,11 +209,6 @@ struct mc_cmd_header {
- 	__le16 cmd_id;
- };
- 
--struct fsl_mc_command {
--	__le64 header;
--	__le64 params[MC_CMD_NUM_OF_PARAMS];
--};
--
- enum mc_cmd_status {
- 	MC_CMD_STATUS_OK = 0x0, /* Completed successfully */
- 	MC_CMD_STATUS_READY = 0x1, /* Ready to be processed */
---- /dev/null
-+++ b/include/uapi/linux/fsl_mc.h
-@@ -0,0 +1,25 @@
-+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-+/*
-+ * Management Complex (MC) userspace public interface
-+ *
-+ * Copyright 2018 NXP
-+ *
-+ */
-+#ifndef _UAPI_FSL_MC_H_
-+#define _UAPI_FSL_MC_H_
-+
-+#include <linux/types.h>
-+
-+#define MC_CMD_NUM_OF_PARAMS	7
-+
-+/**
-+ * struct fsl_mc_command - Management Complex (MC) command structure
-+ * @header: MC command header
-+ * @params: MC command parameters
-+ */
-+struct fsl_mc_command {
-+	__le64 header;
-+	__le64 params[MC_CMD_NUM_OF_PARAMS];
-+};
-+
-+#endif /* _UAPI_FSL_MC_H_ */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0131-bus-fsl-mc-add-fsl-mc-userspace-support.patch b/target/linux/layerscape/patches-5.4/701-net-0131-bus-fsl-mc-add-fsl-mc-userspace-support.patch
deleted file mode 100644
index 106ce0dd8e..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0131-bus-fsl-mc-add-fsl-mc-userspace-support.patch
+++ /dev/null
@@ -1,371 +0,0 @@
-From 5b5567547d0088ec96160634c4e342bb06e52f19 Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Wed, 14 Mar 2018 19:25:27 +0200
-Subject: [PATCH] bus: fsl-mc: add fsl-mc userspace support
-
-Adding userspace support for the MC (Management Complex) means exporting
-an ioctl capable device file representing the root resource container.
-
-This new functionality in the fsl-mc bus driver intends to provide
-userspace applications an interface to interact with the MC firmware.
-
-Commands that are composed in userspace are sent to the MC firmware
-through the FSL_MC_SEND_MC_COMMAND ioctl.  By default the implicit MC
-I/O portal is used for this operation, but if the implicit one is busy,
-a dynamic portal is allocated and then freed upon execution.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
----
- Documentation/ioctl/ioctl-number.rst |   1 +
- drivers/bus/fsl-mc/Kconfig           |   7 ++
- drivers/bus/fsl-mc/Makefile          |   3 +
- drivers/bus/fsl-mc/dprc-driver.c     |  14 ++-
- drivers/bus/fsl-mc/fsl-mc-private.h  |  39 ++++++++
- drivers/bus/fsl-mc/fsl-mc-uapi.c     | 168 +++++++++++++++++++++++++++++++++++
- include/uapi/linux/fsl_mc.h          |   9 ++
- 7 files changed, 240 insertions(+), 1 deletion(-)
- create mode 100644 drivers/bus/fsl-mc/fsl-mc-uapi.c
-
---- a/Documentation/ioctl/ioctl-number.rst
-+++ b/Documentation/ioctl/ioctl-number.rst
-@@ -180,6 +180,7 @@ Code  Seq#    Include File
- 'R'   00-1F  linux/random.h                                          conflict!
- 'R'   01     linux/rfkill.h                                          conflict!
- 'R'   C0-DF  net/bluetooth/rfcomm.h
-+'R'   E0     uapi/linux/fsl_mc.h
- 'S'   all    linux/cdrom.h                                           conflict!
- 'S'   80-81  scsi/scsi_ioctl.h                                       conflict!
- 'S'   82-FF  scsi/scsi.h                                             conflict!
---- a/drivers/bus/fsl-mc/Kconfig
-+++ b/drivers/bus/fsl-mc/Kconfig
-@@ -14,3 +14,10 @@ config FSL_MC_BUS
- 	  architecture.  The fsl-mc bus driver handles discovery of
- 	  DPAA2 objects (which are represented as Linux devices) and
- 	  binding objects to drivers.
-+
-+config FSL_MC_UAPI_SUPPORT
-+	bool "Management Complex (MC) userspace support"
-+	depends on FSL_MC_BUS
-+	help
-+	  Provides userspace support for creating/destroying/configuring
-+	  DPAA2 objects in the Management Complex.
---- a/drivers/bus/fsl-mc/Makefile
-+++ b/drivers/bus/fsl-mc/Makefile
-@@ -16,3 +16,6 @@ mc-bus-driver-objs := fsl-mc-bus.o \
- 		      fsl-mc-allocator.o \
- 		      fsl-mc-msi.o \
- 		      dpmcp.o
-+
-+# MC userspace support
-+obj-$(CONFIG_FSL_MC_UAPI_SUPPORT) += fsl-mc-uapi.o
---- a/drivers/bus/fsl-mc/dprc-driver.c
-+++ b/drivers/bus/fsl-mc/dprc-driver.c
-@@ -647,6 +647,12 @@ static int dprc_probe(struct fsl_mc_devi
- 		} else {
- 			dev_set_msi_domain(&mc_dev->dev, mc_msi_domain);
- 			msi_domain_set = true;
-+
-+			error = fsl_mc_uapi_create_device_file(mc_bus);
-+			if (error < 0) {
-+				error = -EPROBE_DEFER;
-+				goto error_cleanup_msi_domain;
-+			}
- 		}
- 	}
- 
-@@ -654,7 +660,7 @@ static int dprc_probe(struct fsl_mc_devi
- 			  &mc_dev->mc_handle);
- 	if (error < 0) {
- 		dev_err(&mc_dev->dev, "dprc_open() failed: %d\n", error);
--		goto error_cleanup_msi_domain;
-+		goto error_cleanup_uapi;
- 	}
- 
- 	error = dprc_get_attributes(mc_dev->mc_io, 0, mc_dev->mc_handle,
-@@ -706,6 +712,10 @@ static int dprc_probe(struct fsl_mc_devi
- error_cleanup_open:
- 	(void)dprc_close(mc_dev->mc_io, 0, mc_dev->mc_handle);
- 
-+error_cleanup_uapi:
-+	if (fsl_mc_is_root_dprc(&mc_dev->dev))
-+		fsl_mc_uapi_remove_device_file(mc_bus);
-+
- error_cleanup_msi_domain:
- 	if (msi_domain_set)
- 		dev_set_msi_domain(&mc_dev->dev, NULL);
-@@ -774,6 +784,8 @@ static int dprc_remove(struct fsl_mc_dev
- 	if (!fsl_mc_is_root_dprc(&mc_dev->dev)) {
- 		fsl_destroy_mc_io(mc_dev->mc_io);
- 		mc_dev->mc_io = NULL;
-+	} else {
-+		fsl_mc_uapi_remove_device_file(mc_bus);
- 	}
- 
- 	dev_info(&mc_dev->dev, "DPRC device unbound from driver");
---- a/drivers/bus/fsl-mc/fsl-mc-private.h
-+++ b/drivers/bus/fsl-mc/fsl-mc-private.h
-@@ -10,6 +10,8 @@
- 
- #include <linux/fsl/mc.h>
- #include <linux/mutex.h>
-+#include <linux/ioctl.h>
-+#include <linux/miscdevice.h>
- 
- /*
-  * Data Path Management Complex (DPMNG) General API
-@@ -505,6 +507,22 @@ struct fsl_mc_resource_pool {
- };
- 
- /**
-+ * struct fsl_mc_uapi - information associated with a device file
-+ * @misc: struct miscdevice linked to the root dprc
-+ * @device: newly created device in /dev
-+ * @mutex: mutex lock to serialize the open/release operations
-+ * @local_instance_in_use: local MC I/O instance in use or not
-+ * @static_mc_io: pointer to the static MC I/O object
-+ */
-+struct fsl_mc_uapi {
-+	struct miscdevice misc;
-+	struct device *device;
-+	struct mutex mutex; /* serialize open/release operations */
-+	u32 local_instance_in_use;
-+	struct fsl_mc_io *static_mc_io;
-+};
-+
-+/**
-  * struct fsl_mc_bus - logical bus that corresponds to a physical DPRC
-  * @mc_dev: fsl-mc device for the bus device itself.
-  * @resource_pools: array of resource pools (one pool per resource type)
-@@ -513,6 +531,7 @@ struct fsl_mc_resource_pool {
-  * @irq_resources: Pointer to array of IRQ objects for the IRQ pool
-  * @scan_mutex: Serializes bus scanning
-  * @dprc_attr: DPRC attributes
-+ * @uapi_misc: struct that abstracts the interaction with userspace
-  */
- struct fsl_mc_bus {
- 	struct fsl_mc_device mc_dev;
-@@ -520,6 +539,7 @@ struct fsl_mc_bus {
- 	struct fsl_mc_device_irq *irq_resources;
- 	struct mutex scan_mutex;    /* serializes bus scanning */
- 	struct dprc_attributes dprc_attr;
-+	struct fsl_mc_uapi uapi_misc;
- };
- 
- #define to_fsl_mc_bus(_mc_dev) \
-@@ -574,4 +594,23 @@ void fsl_destroy_mc_io(struct fsl_mc_io
- 
- bool fsl_mc_is_root_dprc(struct device *dev);
- 
-+#ifdef CONFIG_FSL_MC_UAPI_SUPPORT
-+
-+int fsl_mc_uapi_create_device_file(struct fsl_mc_bus *mc_bus);
-+
-+void fsl_mc_uapi_remove_device_file(struct fsl_mc_bus *mc_bus);
-+
-+#else
-+
-+static inline int fsl_mc_uapi_create_device_file(struct fsl_mc_bus *mc_bus)
-+{
-+	return 0;
-+}
-+
-+static inline void fsl_mc_uapi_remove_device_file(struct fsl_mc_bus *mc_bus)
-+{
-+}
-+
-+#endif
-+
- #endif /* _FSL_MC_PRIVATE_H_ */
---- /dev/null
-+++ b/drivers/bus/fsl-mc/fsl-mc-uapi.c
-@@ -0,0 +1,168 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Management Complex (MC) userspace support
-+ *
-+ * Copyright 2018 NXP
-+ *
-+ */
-+
-+#include <linux/slab.h>
-+#include <linux/fs.h>
-+#include <linux/uaccess.h>
-+#include <linux/miscdevice.h>
-+
-+#include "fsl-mc-private.h"
-+
-+struct uapi_priv_data {
-+	struct fsl_mc_uapi *uapi;
-+	struct fsl_mc_io *mc_io;
-+};
-+
-+static int fsl_mc_uapi_send_command(unsigned long arg,
-+				    struct fsl_mc_io *mc_io)
-+{
-+	struct fsl_mc_command mc_cmd;
-+	int error;
-+
-+	error = copy_from_user(&mc_cmd, (void __user *)arg, sizeof(mc_cmd));
-+	if (error)
-+		return -EFAULT;
-+
-+	error = mc_send_command(mc_io, &mc_cmd);
-+	if (error)
-+		return error;
-+
-+	error = copy_to_user((void __user *)arg, &mc_cmd, sizeof(mc_cmd));
-+	if (error)
-+		return -EFAULT;
-+
-+	return 0;
-+}
-+
-+static int fsl_mc_uapi_dev_open(struct inode *inode, struct file *filep)
-+{
-+	struct fsl_mc_device *root_mc_device;
-+	struct uapi_priv_data *priv_data;
-+	struct fsl_mc_io *dynamic_mc_io;
-+	struct fsl_mc_uapi *mc_uapi;
-+	struct fsl_mc_bus *mc_bus;
-+	int error;
-+
-+	priv_data = kzalloc(sizeof(*priv_data), GFP_KERNEL);
-+	if (!priv_data)
-+		return -ENOMEM;
-+
-+	mc_uapi = container_of(filep->private_data, struct fsl_mc_uapi, misc);
-+	mc_bus = container_of(mc_uapi, struct fsl_mc_bus, uapi_misc);
-+	root_mc_device = &mc_bus->mc_dev;
-+
-+	mutex_lock(&mc_uapi->mutex);
-+
-+	if (!mc_uapi->local_instance_in_use) {
-+		priv_data->mc_io = mc_uapi->static_mc_io;
-+		mc_uapi->local_instance_in_use = 1;
-+	} else {
-+		error = fsl_mc_portal_allocate(root_mc_device, 0,
-+					       &dynamic_mc_io);
-+		if (error) {
-+			dev_dbg(&root_mc_device->dev,
-+				"Could not allocate MC portal\n");
-+			goto error_portal_allocate;
-+		}
-+
-+		priv_data->mc_io = dynamic_mc_io;
-+	}
-+	priv_data->uapi = mc_uapi;
-+	filep->private_data = priv_data;
-+
-+	mutex_unlock(&mc_uapi->mutex);
-+
-+	return 0;
-+
-+error_portal_allocate:
-+	mutex_unlock(&mc_uapi->mutex);
-+
-+	return error;
-+}
-+
-+static int fsl_mc_uapi_dev_release(struct inode *inode, struct file *filep)
-+{
-+	struct uapi_priv_data *priv_data;
-+	struct fsl_mc_uapi *mc_uapi;
-+	struct fsl_mc_io *mc_io;
-+
-+	priv_data = filep->private_data;
-+	mc_uapi = priv_data->uapi;
-+	mc_io = priv_data->mc_io;
-+
-+	mutex_lock(&mc_uapi->mutex);
-+
-+	if (mc_io == mc_uapi->static_mc_io)
-+		mc_uapi->local_instance_in_use = 0;
-+	else
-+		fsl_mc_portal_free(mc_io);
-+
-+	kfree(filep->private_data);
-+	filep->private_data =  NULL;
-+
-+	mutex_unlock(&mc_uapi->mutex);
-+
-+	return 0;
-+}
-+
-+static long fsl_mc_uapi_dev_ioctl(struct file *file,
-+				  unsigned int cmd,
-+				  unsigned long arg)
-+{
-+	struct uapi_priv_data *priv_data = file->private_data;
-+	struct fsl_mc_device *root_mc_device;
-+	struct fsl_mc_bus *mc_bus;
-+	int error;
-+
-+	mc_bus = container_of(priv_data->uapi, struct fsl_mc_bus, uapi_misc);
-+	root_mc_device = &mc_bus->mc_dev;
-+
-+	switch (cmd) {
-+	case FSL_MC_SEND_MC_COMMAND:
-+		error = fsl_mc_uapi_send_command(arg, priv_data->mc_io);
-+		break;
-+	default:
-+		dev_dbg(&root_mc_device->dev, "unexpected ioctl call number\n");
-+		error = -EINVAL;
-+	}
-+
-+	return error;
-+}
-+
-+static const struct file_operations fsl_mc_uapi_dev_fops = {
-+	.owner = THIS_MODULE,
-+	.open = fsl_mc_uapi_dev_open,
-+	.release = fsl_mc_uapi_dev_release,
-+	.unlocked_ioctl = fsl_mc_uapi_dev_ioctl,
-+};
-+
-+int fsl_mc_uapi_create_device_file(struct fsl_mc_bus *mc_bus)
-+{
-+	struct fsl_mc_device *mc_dev = &mc_bus->mc_dev;
-+	struct fsl_mc_uapi *mc_uapi = &mc_bus->uapi_misc;
-+	int error;
-+
-+	mc_uapi->misc.minor = MISC_DYNAMIC_MINOR;
-+	mc_uapi->misc.name = dev_name(&mc_dev->dev);
-+	mc_uapi->misc.fops = &fsl_mc_uapi_dev_fops;
-+
-+	error = misc_register(&mc_uapi->misc);
-+	if (error)
-+		return error;
-+
-+	mc_uapi->static_mc_io = mc_bus->mc_dev.mc_io;
-+
-+	mutex_init(&mc_uapi->mutex);
-+
-+	return 0;
-+}
-+
-+void fsl_mc_uapi_remove_device_file(struct fsl_mc_bus *mc_bus)
-+{
-+	misc_deregister(&mc_bus->uapi_misc.misc);
-+}
---- a/include/uapi/linux/fsl_mc.h
-+++ b/include/uapi/linux/fsl_mc.h
-@@ -16,10 +16,19 @@
-  * struct fsl_mc_command - Management Complex (MC) command structure
-  * @header: MC command header
-  * @params: MC command parameters
-+ *
-+ * Used by FSL_MC_SEND_MC_COMMAND
-  */
- struct fsl_mc_command {
- 	__le64 header;
- 	__le64 params[MC_CMD_NUM_OF_PARAMS];
- };
- 
-+#define FSL_MC_SEND_CMD_IOCTL_TYPE	'R'
-+#define FSL_MC_SEND_CMD_IOCTL_SEQ	0xE0
-+
-+#define FSL_MC_SEND_MC_COMMAND \
-+	_IOWR(FSL_MC_SEND_CMD_IOCTL_TYPE, FSL_MC_SEND_CMD_IOCTL_SEQ, \
-+	struct fsl_mc_command)
-+
- #endif /* _UAPI_FSL_MC_H_ */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0132-bus-fsl-mc-add-root-dprc-rescan-attribute.patch b/target/linux/layerscape/patches-5.4/701-net-0132-bus-fsl-mc-add-root-dprc-rescan-attribute.patch
deleted file mode 100644
index 8fd964993e..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0132-bus-fsl-mc-add-root-dprc-rescan-attribute.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 64bd4f6f266110d908e51787a81ed0bc9d325941 Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Mon, 5 Mar 2018 18:37:32 +0200
-Subject: [PATCH] bus: fsl-mc: add root dprc rescan attribute
-
-Introduce the rescan attribute as a device attribute to
-synchronize the fsl-mc bus objects and the MC firmware.
-
-To rescan the root dprc only, e.g.
-echo 1 > /sys/bus/fsl-mc/devices/dprc.1/rescan
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
----
- Documentation/ABI/stable/sysfs-bus-fsl-mc |  9 ++++++++
- MAINTAINERS                               |  1 +
- drivers/bus/fsl-mc/dprc-driver.c          | 36 +++++++++++++++++++++++++++++++
- 3 files changed, 46 insertions(+)
- create mode 100644 Documentation/ABI/stable/sysfs-bus-fsl-mc
-
---- /dev/null
-+++ b/Documentation/ABI/stable/sysfs-bus-fsl-mc
-@@ -0,0 +1,9 @@
-+What:		/sys/bus/fsl-mc/devices/dprc.*/rescan
-+Date:		November 2018
-+KernelVersion:	5.0
-+Contact:	Ioana Ciornei <ioana.ciornei@nxp.com>
-+Description:	Writing a non-zero value to this attribute will
-+		force a rescan of dprc.X container in the system and
-+		synchronize the objects under dprc.X and the
-+		Management Complex firmware.
-+Users:		Userspace drivers and management tools
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -13440,6 +13440,7 @@ F:	Documentation/devicetree/bindings/mis
- F:	Documentation/networking/device_drivers/freescale/dpaa2/overview.rst
- F:	Documentation/networking/dpaa2/overview.rst
- F:	include/uapi/linux/fsl_mc.h
-+F:	Documentation/ABI/stable/sysfs-bus-fsl-mc
- 
- QT1010 MEDIA DRIVER
- M:	Antti Palosaari <crope@iki.fi>
---- a/drivers/bus/fsl-mc/dprc-driver.c
-+++ b/drivers/bus/fsl-mc/dprc-driver.c
-@@ -354,6 +354,33 @@ static int dprc_scan_container(struct fs
- 	return 0;
- }
- 
-+static ssize_t rescan_store(struct device *dev,
-+			    struct device_attribute *attr,
-+			    const char *buf, size_t count)
-+{
-+	struct fsl_mc_device *root_mc_dev;
-+	struct fsl_mc_bus *root_mc_bus;
-+	unsigned long val;
-+
-+	if (!fsl_mc_is_root_dprc(dev))
-+		return -EINVAL;
-+
-+	root_mc_dev = to_fsl_mc_device(dev);
-+	root_mc_bus = to_fsl_mc_bus(root_mc_dev);
-+
-+	if (kstrtoul(buf, 0, &val) < 0)
-+		return -EINVAL;
-+
-+	if (val) {
-+		mutex_lock(&root_mc_bus->scan_mutex);
-+		dprc_scan_objects(root_mc_dev, NULL);
-+		mutex_unlock(&root_mc_bus->scan_mutex);
-+	}
-+
-+	return count;
-+}
-+static DEVICE_ATTR_WO(rescan);
-+
- /**
-  * dprc_irq0_handler - Regular ISR for DPRC interrupt 0
-  *
-@@ -692,6 +719,13 @@ static int dprc_probe(struct fsl_mc_devi
- 
- 	mutex_init(&mc_bus->scan_mutex);
- 
-+	error = device_create_file(&mc_dev->dev, &dev_attr_rescan);
-+	if (error < 0) {
-+		dev_err(&mc_dev->dev, "device_create_file() failed: %d\n",
-+			error);
-+		goto error_cleanup_open;
-+	}
-+
- 	/*
- 	 * Discover MC objects in DPRC object:
- 	 */
-@@ -788,6 +822,8 @@ static int dprc_remove(struct fsl_mc_dev
- 		fsl_mc_uapi_remove_device_file(mc_bus);
- 	}
- 
-+	device_remove_file(&mc_dev->dev, &dev_attr_rescan);
-+
- 	dev_info(&mc_dev->dev, "DPRC device unbound from driver");
- 	return 0;
- }
diff --git a/target/linux/layerscape/patches-5.4/701-net-0133-bus-fsl-mc-add-bus-rescan-attribute.patch b/target/linux/layerscape/patches-5.4/701-net-0133-bus-fsl-mc-add-bus-rescan-attribute.patch
deleted file mode 100644
index ea22ddb3fc..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0133-bus-fsl-mc-add-bus-rescan-attribute.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 4eba1e0209a52798e1b6a233840a28fc5132cd9c Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Mon, 5 Mar 2018 18:38:46 +0200
-Subject: [PATCH] bus: fsl-mc: add bus rescan attribute
-
-Introduce the rescan attribute as a bus attribute to
-synchronize the fsl-mc bus objects and the MC firmware.
-
-To rescan the fsl-mc bus, e.g.,
-echo 1 > /sys/bus/fsl-mc/rescan
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
----
- Documentation/ABI/stable/sysfs-bus-fsl-mc | 10 ++++++++
- drivers/bus/fsl-mc/dprc-driver.c          |  4 +--
- drivers/bus/fsl-mc/fsl-mc-bus.c           | 41 +++++++++++++++++++++++++++++++
- drivers/bus/fsl-mc/fsl-mc-private.h       |  2 ++
- 4 files changed, 55 insertions(+), 2 deletions(-)
-
---- a/Documentation/ABI/stable/sysfs-bus-fsl-mc
-+++ b/Documentation/ABI/stable/sysfs-bus-fsl-mc
-@@ -7,3 +7,13 @@ Description:	Writing a non-zero value to
- 		synchronize the objects under dprc.X and the
- 		Management Complex firmware.
- Users:		Userspace drivers and management tools
-+
-+What:		/sys/bus/fsl-mc/rescan
-+Date:		November 2018
-+KernelVersion:	5.0
-+Contact:	Ioana Ciornei <ioana.ciornei@nxp.com>
-+Description:	Writing a non-zero value to this attribute will
-+		force a rescan of fsl-mc bus in the system and
-+		synchronize the objects under fsl-mc bus and the
-+		Management Complex firmware.
-+Users:		Userspace drivers and management tools
---- a/drivers/bus/fsl-mc/dprc-driver.c
-+++ b/drivers/bus/fsl-mc/dprc-driver.c
-@@ -214,8 +214,8 @@ static void dprc_add_new_devices(struct
-  * populated before they can get allocation requests from probe callbacks
-  * of the device drivers for the non-allocatable devices.
-  */
--static int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev,
--			     unsigned int *total_irq_count)
-+int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev,
-+		      unsigned int *total_irq_count)
- {
- 	int num_child_objects;
- 	int dprc_get_obj_failures;
---- a/drivers/bus/fsl-mc/fsl-mc-bus.c
-+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
-@@ -154,12 +154,53 @@ static struct attribute *fsl_mc_dev_attr
- 
- ATTRIBUTE_GROUPS(fsl_mc_dev);
- 
-+static int scan_fsl_mc_bus(struct device *dev, void *data)
-+{
-+	struct fsl_mc_device *root_mc_dev;
-+	struct fsl_mc_bus *root_mc_bus;
-+
-+	if (!fsl_mc_is_root_dprc(dev))
-+		goto exit;
-+
-+	root_mc_dev = to_fsl_mc_device(dev);
-+	root_mc_bus = to_fsl_mc_bus(root_mc_dev);
-+	mutex_lock(&root_mc_bus->scan_mutex);
-+	dprc_scan_objects(root_mc_dev, NULL);
-+	mutex_unlock(&root_mc_bus->scan_mutex);
-+
-+exit:
-+	return 0;
-+}
-+
-+static ssize_t rescan_store(struct bus_type *bus,
-+			    const char *buf, size_t count)
-+{
-+	unsigned long val;
-+
-+	if (kstrtoul(buf, 0, &val) < 0)
-+		return -EINVAL;
-+
-+	if (val)
-+		bus_for_each_dev(bus, NULL, NULL, scan_fsl_mc_bus);
-+
-+	return count;
-+}
-+static BUS_ATTR_WO(rescan);
-+
-+static struct attribute *fsl_mc_bus_attrs[] = {
-+	&bus_attr_rescan.attr,
-+	NULL,
-+};
-+
-+ATTRIBUTE_GROUPS(fsl_mc_bus);
-+
- struct bus_type fsl_mc_bus_type = {
- 	.name = "fsl-mc",
- 	.match = fsl_mc_bus_match,
- 	.uevent = fsl_mc_bus_uevent,
- 	.dma_configure  = fsl_mc_dma_configure,
- 	.dev_groups = fsl_mc_dev_groups,
-+	.bus_groups = fsl_mc_bus_groups,
- };
- EXPORT_SYMBOL_GPL(fsl_mc_bus_type);
- 
---- a/drivers/bus/fsl-mc/fsl-mc-private.h
-+++ b/drivers/bus/fsl-mc/fsl-mc-private.h
-@@ -556,6 +556,8 @@ int __init dprc_driver_init(void);
- 
- void dprc_driver_exit(void);
- 
-+int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev,
-+		      unsigned int *total_irq_count);
- int __init fsl_mc_allocator_driver_init(void);
- 
- void fsl_mc_allocator_driver_exit(void);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0134-bus-fsl-mc-Add-dprc-reset-container-support.patch b/target/linux/layerscape/patches-5.4/701-net-0134-bus-fsl-mc-Add-dprc-reset-container-support.patch
deleted file mode 100644
index a609905a9e..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0134-bus-fsl-mc-Add-dprc-reset-container-support.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From 350201cc09a58dcf5c49f636238b01637f5ee06d Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Fri, 13 Apr 2018 11:35:10 +0300
-Subject: [PATCH] bus: fsl-mc: Add dprc-reset-container support
-
-DPRC-reset is required for VFIO and is missing from
-mc-bus support.
-This patch added reset-container support.
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- drivers/bus/fsl-mc/dprc.c           | 41 +++++++++++++++++++++++++++++++++++++
- drivers/bus/fsl-mc/fsl-mc-private.h | 10 +++++++++
- 2 files changed, 51 insertions(+)
-
---- a/drivers/bus/fsl-mc/dprc.c
-+++ b/drivers/bus/fsl-mc/dprc.c
-@@ -73,6 +73,47 @@ int dprc_close(struct fsl_mc_io *mc_io,
- EXPORT_SYMBOL_GPL(dprc_close);
- 
- /**
-+ * dprc_reset_container - Reset child container.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPRC object
-+ * @child_container_id:	ID of the container to reset
-+ *
-+ * In case a software context crashes or becomes non-responsive, the parent
-+ * may wish to reset its resources container before the software context is
-+ * restarted.
-+ *
-+ * This routine informs all objects assigned to the child container that the
-+ * container is being reset, so they may perform any cleanup operations that are
-+ * needed. All objects handles that were owned by the child container shall be
-+ * closed.
-+ *
-+ * Note that such request may be submitted even if the child software context
-+ * has not crashed, but the resulting object cleanup operations will not be
-+ * aware of that.
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dprc_reset_container(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token,
-+			 int child_container_id)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	struct dprc_cmd_reset_container *cmd_params;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPRC_CMDID_RESET_CONT,
-+					  cmd_flags, token);
-+	cmd_params = (struct dprc_cmd_reset_container *)cmd.params;
-+	cmd_params->child_container_id = cpu_to_le32(child_container_id);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+EXPORT_SYMBOL_GPL(dprc_reset_container);
-+
-+/**
-  * dprc_set_irq() - Set IRQ information for the DPRC to trigger an interrupt.
-  * @mc_io:	Pointer to MC portal's I/O object
-  * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
---- a/drivers/bus/fsl-mc/fsl-mc-private.h
-+++ b/drivers/bus/fsl-mc/fsl-mc-private.h
-@@ -93,6 +93,7 @@ int dpmcp_reset(struct fsl_mc_io *mc_io,
- #define DPRC_CMDID_GET_API_VERSION              DPRC_CMD(0xa05)
- 
- #define DPRC_CMDID_GET_ATTR                     DPRC_CMD(0x004)
-+#define DPRC_CMDID_RESET_CONT                   DPRC_CMD(0x005)
- 
- #define DPRC_CMDID_SET_IRQ                      DPRC_CMD(0x010)
- #define DPRC_CMDID_SET_IRQ_ENABLE               DPRC_CMD(0x012)
-@@ -111,6 +112,10 @@ struct dprc_cmd_open {
- 	__le32 container_id;
- };
- 
-+struct dprc_cmd_reset_container {
-+	__le32 child_container_id;
-+};
-+
- struct dprc_cmd_set_irq {
- 	/* cmd word 0 */
- 	__le32 irq_val;
-@@ -394,6 +399,11 @@ int dprc_get_container_id(struct fsl_mc_
- 			  u32 cmd_flags,
- 			  int *container_id);
- 
-+int dprc_reset_container(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token,
-+			 int child_container_id);
-+
- /*
-  * Data Path Buffer Pool (DPBP) API
-  */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0135-bus-fsl-mc-Propagate-driver_override-for-a-child-DPR.patch b/target/linux/layerscape/patches-5.4/701-net-0135-bus-fsl-mc-Propagate-driver_override-for-a-child-DPR.patch
deleted file mode 100644
index b750c72664..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0135-bus-fsl-mc-Propagate-driver_override-for-a-child-DPR.patch
+++ /dev/null
@@ -1,196 +0,0 @@
-From ab5ad879bf30318213a717ab50944b5590bc09c1 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Fri, 13 Apr 2018 11:52:44 +0300
-Subject: [PATCH] bus: fsl-mc: Propagate driver_override for a child DPRC's
- children
-
-When a child DPRC is bound to the vfio_fsl_mc driver via
-driver_override, its own children should not be bound to corresponding
-host kernel drivers, but instead should be bound to the vfio_fsl_mc
-driver as well.
-
-Currently, when a child container is scanned by the vfio_fsl_mc
-driver, child devices found are automatically bound to corresponding
-host kernel drivers (e.g., DPMCP and DPBP objects are bound to the
-fsl_mc_allocator driver, DPNI objects are bound to the ldpaa_eth
-driver, etc), Then, the user has to manually unbind these child
-devices from their drivers, set the driver_override sysfs attribute
-to vfio_fsl_mc driver, for each of them and rebind them.
-
-Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
-Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- drivers/bus/fsl-mc/dprc-driver.c    | 16 +++++++++++-----
- drivers/bus/fsl-mc/fsl-mc-bus.c     | 19 +++++++++++++++++--
- drivers/bus/fsl-mc/fsl-mc-private.h |  2 ++
- include/linux/fsl/mc.h              |  2 ++
- 4 files changed, 32 insertions(+), 7 deletions(-)
-
---- a/drivers/bus/fsl-mc/dprc-driver.c
-+++ b/drivers/bus/fsl-mc/dprc-driver.c
-@@ -156,6 +156,8 @@ static void check_plugged_state_change(s
-  * dprc_add_new_devices - Adds devices to the logical bus for a DPRC
-  *
-  * @mc_bus_dev: pointer to the fsl-mc device that represents a DPRC object
-+ * @driver_override: driver override to apply to new objects found in the
-+ * DPRC, or NULL, if none.
-  * @obj_desc_array: array of device descriptors for child devices currently
-  * present in the physical DPRC.
-  * @num_child_objects_in_mc: number of entries in obj_desc_array
-@@ -165,6 +167,7 @@ static void check_plugged_state_change(s
-  * in the physical DPRC.
-  */
- static void dprc_add_new_devices(struct fsl_mc_device *mc_bus_dev,
-+				 const char *driver_override,
- 				 struct fsl_mc_obj_desc *obj_desc_array,
- 				 int num_child_objects_in_mc)
- {
-@@ -189,7 +192,7 @@ static void dprc_add_new_devices(struct
- 		}
- 
- 		error = fsl_mc_device_add(obj_desc, NULL, &mc_bus_dev->dev,
--					  &child_dev);
-+					  driver_override, &child_dev);
- 		if (error < 0)
- 			continue;
- 	}
-@@ -199,6 +202,8 @@ static void dprc_add_new_devices(struct
-  * dprc_scan_objects - Discover objects in a DPRC
-  *
-  * @mc_bus_dev: pointer to the fsl-mc device that represents a DPRC object
-+ * @driver_override: driver override to apply to new objects found in the
-+ * DPRC, or NULL, if none.
-  * @total_irq_count: If argument is provided the function populates the
-  * total number of IRQs created by objects in the DPRC.
-  *
-@@ -215,6 +220,7 @@ static void dprc_add_new_devices(struct
-  * of the device drivers for the non-allocatable devices.
-  */
- int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev,
-+		      const char *driver_override,
- 		      unsigned int *total_irq_count)
- {
- 	int num_child_objects;
-@@ -315,7 +321,7 @@ int dprc_scan_objects(struct fsl_mc_devi
- 	dprc_remove_devices(mc_bus_dev, child_obj_desc_array,
- 			    num_child_objects);
- 
--	dprc_add_new_devices(mc_bus_dev, child_obj_desc_array,
-+	dprc_add_new_devices(mc_bus_dev, driver_override, child_obj_desc_array,
- 			     num_child_objects);
- 
- 	if (child_obj_desc_array)
-@@ -344,7 +350,7 @@ static int dprc_scan_container(struct fs
- 	 * Discover objects in the DPRC:
- 	 */
- 	mutex_lock(&mc_bus->scan_mutex);
--	error = dprc_scan_objects(mc_bus_dev, NULL);
-+	error = dprc_scan_objects(mc_bus_dev, NULL, NULL);
- 	mutex_unlock(&mc_bus->scan_mutex);
- 	if (error < 0) {
- 		fsl_mc_cleanup_all_resource_pools(mc_bus_dev);
-@@ -373,7 +379,7 @@ static ssize_t rescan_store(struct devic
- 
- 	if (val) {
- 		mutex_lock(&root_mc_bus->scan_mutex);
--		dprc_scan_objects(root_mc_dev, NULL);
-+		dprc_scan_objects(root_mc_dev, NULL, NULL);
- 		mutex_unlock(&root_mc_bus->scan_mutex);
- 	}
- 
-@@ -442,7 +448,7 @@ static irqreturn_t dprc_irq0_handler_thr
- 		      DPRC_IRQ_EVENT_OBJ_CREATED)) {
- 		unsigned int irq_count;
- 
--		error = dprc_scan_objects(mc_dev, &irq_count);
-+		error = dprc_scan_objects(mc_dev, NULL, &irq_count);
- 		if (error < 0) {
- 			/*
- 			 * If the error is -ENXIO, we ignore it, as it indicates
---- a/drivers/bus/fsl-mc/fsl-mc-bus.c
-+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
-@@ -165,7 +165,7 @@ static int scan_fsl_mc_bus(struct device
- 	root_mc_dev = to_fsl_mc_device(dev);
- 	root_mc_bus = to_fsl_mc_bus(root_mc_dev);
- 	mutex_lock(&root_mc_bus->scan_mutex);
--	dprc_scan_objects(root_mc_dev, NULL);
-+	dprc_scan_objects(root_mc_dev, NULL, NULL);
- 	mutex_unlock(&root_mc_bus->scan_mutex);
- 
- exit:
-@@ -597,6 +597,7 @@ static void fsl_mc_device_release(struct
- int fsl_mc_device_add(struct fsl_mc_obj_desc *obj_desc,
- 		      struct fsl_mc_io *mc_io,
- 		      struct device *parent_dev,
-+		      const char *driver_override,
- 		      struct fsl_mc_device **new_mc_dev)
- {
- 	int error;
-@@ -629,6 +630,19 @@ int fsl_mc_device_add(struct fsl_mc_obj_
- 
- 	mc_dev->obj_desc = *obj_desc;
- 	mc_dev->mc_io = mc_io;
-+
-+	if (driver_override) {
-+		/*
-+		 * We trust driver_override, so we don't need to use
-+		 * kstrndup() here
-+		 */
-+		mc_dev->driver_override = kstrdup(driver_override, GFP_KERNEL);
-+		if (!mc_dev->driver_override) {
-+			error = -ENOMEM;
-+			goto error_cleanup_dev;
-+		}
-+	}
-+
- 	device_initialize(&mc_dev->dev);
- 	mc_dev->dev.parent = parent_dev;
- 	mc_dev->dev.bus = &fsl_mc_bus_type;
-@@ -924,7 +938,8 @@ static int fsl_mc_bus_probe(struct platf
- 	obj_desc.irq_count = 1;
- 	obj_desc.region_count = 0;
- 
--	error = fsl_mc_device_add(&obj_desc, mc_io, &pdev->dev, &mc_bus_dev);
-+	error = fsl_mc_device_add(&obj_desc, mc_io, &pdev->dev, NULL,
-+				 &mc_bus_dev);
- 	if (error < 0)
- 		goto error_cleanup_mc_io;
- 
---- a/drivers/bus/fsl-mc/fsl-mc-private.h
-+++ b/drivers/bus/fsl-mc/fsl-mc-private.h
-@@ -558,6 +558,7 @@ struct fsl_mc_bus {
- int __must_check fsl_mc_device_add(struct fsl_mc_obj_desc *obj_desc,
- 				   struct fsl_mc_io *mc_io,
- 				   struct device *parent_dev,
-+				   const char *driver_override,
- 				   struct fsl_mc_device **new_mc_dev);
- 
- void fsl_mc_device_remove(struct fsl_mc_device *mc_dev);
-@@ -567,6 +568,7 @@ int __init dprc_driver_init(void);
- void dprc_driver_exit(void);
- 
- int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev,
-+		      const char *driver_override,
- 		      unsigned int *total_irq_count);
- int __init fsl_mc_allocator_driver_init(void);
- 
---- a/include/linux/fsl/mc.h
-+++ b/include/linux/fsl/mc.h
-@@ -162,6 +162,7 @@ struct fsl_mc_obj_desc {
-  * @regions: pointer to array of MMIO region entries
-  * @irqs: pointer to array of pointers to interrupts allocated to this device
-  * @resource: generic resource associated with this MC object device, if any.
-+ * @driver_override: Driver name to force a match
-  *
-  * Generic device object for MC object devices that are "attached" to a
-  * MC bus.
-@@ -195,6 +196,7 @@ struct fsl_mc_device {
- 	struct fsl_mc_device_irq **irqs;
- 	struct fsl_mc_resource *resource;
- 	struct device_link *consumer_link;
-+	const char *driver_override;
- };
- 
- #define to_fsl_mc_device(_dev) \
diff --git a/target/linux/layerscape/patches-5.4/701-net-0136-bus-fsl-mc-add-device-binding-path-driver_override.patch b/target/linux/layerscape/patches-5.4/701-net-0136-bus-fsl-mc-add-device-binding-path-driver_override.patch
deleted file mode 100644
index 23a0e9b361..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0136-bus-fsl-mc-add-device-binding-path-driver_override.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From f2991d30ff590bf932483a6dfc16c7ebe2f83341 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Fri, 13 Apr 2018 12:42:40 +0300
-Subject: [PATCH] bus: fsl-mc: add device binding path 'driver_override'
-
-This patch is required for vfio-fsl-mc meta driver to successfully bind
-layerscape container devices for device passthrough. This patch adds
-a mechanism to allow a layerscape device to specify a driver rather than
-a layerscape driver provide a device match.
-
-This patch is based on following proposed patches for PCI and platform
-devices
-- https://lkml.org/lkml/2014/4/8/571  :- For Platform devices
-- http://lists-archives.com/linux-kernel/28030441-pci-introduce-new-device-binding-path-using-pci_dev-driver_override.html
-:- For PCI devices
-
-Example to allow a device (dprc.1) to specifically bind
-with driver (vfio-fsl-mc):-
- - echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.1/driver_override
- - echo dprc.1 > /sys/bus/fsl-mc/drivers/fsl_mc_dprc/unbind
- - echo dprc.1 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- drivers/bus/fsl-mc/fsl-mc-bus.c | 53 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 53 insertions(+)
-
---- a/drivers/bus/fsl-mc/fsl-mc-bus.c
-+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
-@@ -83,6 +83,12 @@ static int fsl_mc_bus_match(struct devic
- 	struct fsl_mc_driver *mc_drv = to_fsl_mc_driver(drv);
- 	bool found = false;
- 
-+	/* When driver_override is set, only bind to the matching driver */
-+	if (mc_dev->driver_override) {
-+		found = !strcmp(mc_dev->driver_override, mc_drv->driver.name);
-+		goto out;
-+	}
-+
- 	if (!mc_drv->match_id_table)
- 		goto out;
- 
-@@ -147,8 +153,52 @@ static ssize_t modalias_show(struct devi
- }
- static DEVICE_ATTR_RO(modalias);
- 
-+static ssize_t driver_override_store(struct device *dev,
-+				     struct device_attribute *attr,
-+				     const char *buf, size_t count)
-+{
-+	struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev);
-+	const char *driver_override, *old = mc_dev->driver_override;
-+	char *cp;
-+
-+	if (WARN_ON(dev->bus != &fsl_mc_bus_type))
-+		return -EINVAL;
-+
-+	if (count >= (PAGE_SIZE - 1))
-+		return -EINVAL;
-+
-+	driver_override = kstrndup(buf, count, GFP_KERNEL);
-+	if (!driver_override)
-+		return -ENOMEM;
-+
-+	cp = strchr(driver_override, '\n');
-+	if (cp)
-+		*cp = '\0';
-+
-+	if (strlen(driver_override)) {
-+		mc_dev->driver_override = driver_override;
-+	} else {
-+		kfree(driver_override);
-+		mc_dev->driver_override = NULL;
-+	}
-+
-+	kfree(old);
-+
-+	return count;
-+}
-+
-+static ssize_t driver_override_show(struct device *dev,
-+				    struct device_attribute *attr, char *buf)
-+{
-+	struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev);
-+
-+	return snprintf(buf, PAGE_SIZE, "%s\n", mc_dev->driver_override);
-+}
-+static DEVICE_ATTR_RW(driver_override);
-+
- static struct attribute *fsl_mc_dev_attrs[] = {
- 	&dev_attr_modalias.attr,
-+	&dev_attr_driver_override.attr,
- 	NULL,
- };
- 
-@@ -749,6 +799,9 @@ EXPORT_SYMBOL_GPL(fsl_mc_device_add);
-  */
- void fsl_mc_device_remove(struct fsl_mc_device *mc_dev)
- {
-+	kfree(mc_dev->driver_override);
-+	mc_dev->driver_override = NULL;
-+
- 	/*
- 	 * The device-specific remove callback will get invoked by device_del()
- 	 */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0137-bus-fsl-mc-move-fsl_mc_device_remove-to-common-heade.patch b/target/linux/layerscape/patches-5.4/701-net-0137-bus-fsl-mc-move-fsl_mc_device_remove-to-common-heade.patch
deleted file mode 100644
index 81536485fe..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0137-bus-fsl-mc-move-fsl_mc_device_remove-to-common-heade.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From b5beccaa8629e69acbae8332e84532958e1f24cc Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Fri, 13 Apr 2018 13:25:04 +0300
-Subject: [PATCH] bus: fsl-mc: move fsl_mc_device_remove to common header
-
-VFIO fsl-mc driver need this function on device remove,
-moving this to common header file
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- drivers/bus/fsl-mc/fsl-mc-private.h | 2 --
- include/linux/fsl/mc.h              | 2 ++
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/bus/fsl-mc/fsl-mc-private.h
-+++ b/drivers/bus/fsl-mc/fsl-mc-private.h
-@@ -561,8 +561,6 @@ int __must_check fsl_mc_device_add(struc
- 				   const char *driver_override,
- 				   struct fsl_mc_device **new_mc_dev);
- 
--void fsl_mc_device_remove(struct fsl_mc_device *mc_dev);
--
- int __init dprc_driver_init(void);
- 
- void dprc_driver_exit(void);
---- a/include/linux/fsl/mc.h
-+++ b/include/linux/fsl/mc.h
-@@ -366,6 +366,8 @@ int mc_send_command(struct fsl_mc_io *mc
- 	module_driver(__fsl_mc_driver, fsl_mc_driver_register, \
- 		      fsl_mc_driver_unregister)
- 
-+void fsl_mc_device_remove(struct fsl_mc_device *mc_dev);
-+
- /*
-  * Macro to avoid include chaining to get THIS_MODULE
-  */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0138-bus-fsl-mc-increase-MC_CMD_COMPLETION_TIMEOUT_MS-val.patch b/target/linux/layerscape/patches-5.4/701-net-0138-bus-fsl-mc-increase-MC_CMD_COMPLETION_TIMEOUT_MS-val.patch
deleted file mode 100644
index 2bf3b15f2e..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0138-bus-fsl-mc-increase-MC_CMD_COMPLETION_TIMEOUT_MS-val.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From a41f550c0252dc24892b463212379c41b1e10fec Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Fri, 13 Apr 2018 13:27:31 +0300
-Subject: [PATCH] bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value to
- 15s
-
-With recent MC release, a timeout of 500ms is not enough in most
-circumstances. If MC firmware will respond faster, we should
-decrease this value.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- drivers/bus/fsl-mc/mc-sys.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/bus/fsl-mc/mc-sys.c
-+++ b/drivers/bus/fsl-mc/mc-sys.c
-@@ -19,7 +19,7 @@
- /**
-  * Timeout in milliseconds to wait for the completion of an MC command
-  */
--#define MC_CMD_COMPLETION_TIMEOUT_MS	500
-+#define MC_CMD_COMPLETION_TIMEOUT_MS	15000
- 
- /*
-  * usleep_range() min and max values used to throttle down polling
diff --git a/target/linux/layerscape/patches-5.4/701-net-0139-bus-fsl-mc-added-missing-fields-to-dprc_rsp_get_obj_.patch b/target/linux/layerscape/patches-5.4/701-net-0139-bus-fsl-mc-added-missing-fields-to-dprc_rsp_get_obj_.patch
deleted file mode 100644
index cfadd798fd..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0139-bus-fsl-mc-added-missing-fields-to-dprc_rsp_get_obj_.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 7c72e64115a9145df5b8faf2182ef17b065261a9 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Fri, 13 Apr 2018 15:04:45 +0300
-Subject: [PATCH] bus: fsl-mc: added missing fields to dprc_rsp_get_obj_region
- structure
-
-'type' and 'flags' fields were missing from dprc_rsp_get_obj_region
-structure therefore the MC Bus driver was not receiving proper flags
-from MC like DPRC_REGION_CACHEABLE.
-
-Signed-off-by: Cristian Sovaiala <cristian.sovaiala@freescale.com>
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- drivers/bus/fsl-mc/dprc.c           | 2 ++
- drivers/bus/fsl-mc/fsl-mc-private.h | 5 +++--
- 2 files changed, 5 insertions(+), 2 deletions(-)
-
---- a/drivers/bus/fsl-mc/dprc.c
-+++ b/drivers/bus/fsl-mc/dprc.c
-@@ -524,6 +524,8 @@ int dprc_get_obj_region(struct fsl_mc_io
- 	rsp_params = (struct dprc_rsp_get_obj_region *)cmd.params;
- 	region_desc->base_offset = le64_to_cpu(rsp_params->base_offset);
- 	region_desc->size = le32_to_cpu(rsp_params->size);
-+	region_desc->type = rsp_params->type;
-+	region_desc->flags = le32_to_cpu(rsp_params->flags);
- 	if (major_ver > 6 || (major_ver == 6 && minor_ver >= 3))
- 		region_desc->base_address = le64_to_cpu(rsp_params->base_addr);
- 	else
---- a/drivers/bus/fsl-mc/fsl-mc-private.h
-+++ b/drivers/bus/fsl-mc/fsl-mc-private.h
-@@ -207,12 +207,13 @@ struct dprc_cmd_get_obj_region {
- 
- struct dprc_rsp_get_obj_region {
- 	/* response word 0 */
--	__le64 pad;
-+	__le64 pad0;
- 	/* response word 1 */
- 	__le64 base_offset;
- 	/* response word 2 */
- 	__le32 size;
--	__le32 pad2;
-+	u8 type;
-+	u8 pad2[3];
- 	/* response word 3 */
- 	__le32 flags;
- 	__le32 pad3;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0140-bus-fsl-mc-define-macros-for-iommu-enablement-for-fs.patch b/target/linux/layerscape/patches-5.4/701-net-0140-bus-fsl-mc-define-macros-for-iommu-enablement-for-fs.patch
deleted file mode 100644
index b29ae0746e..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0140-bus-fsl-mc-define-macros-for-iommu-enablement-for-fs.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From e6c39c2219f9d308ea57c09fc1b0b5b151b52b7d Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Mon, 16 Apr 2018 11:33:11 +0300
-Subject: [PATCH] bus: fsl-mc: define macros for iommu enablement for fsl-mc
- bus
-
-Macros to get coherency and the container device of the devices on
-fsl-mc bus are required to suport SMMU for this bus. This patch
-defines the same.
-
-Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- include/linux/fsl/mc.h | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/include/linux/fsl/mc.h
-+++ b/include/linux/fsl/mc.h
-@@ -356,6 +356,10 @@ int mc_send_command(struct fsl_mc_io *mc
- #define fsl_mc_cont_dev(_dev) (fsl_mc_is_cont_dev(_dev) ? \
- 	(_dev) : (_dev)->parent)
- 
-+#define fsl_mc_is_dev_coherent(_dev) \
-+	(!((to_fsl_mc_device(_dev))->obj_desc.flags & \
-+	FSL_MC_OBJ_FLAG_NO_MEM_SHAREABILITY))
-+
- /*
-  * module_fsl_mc_driver() - Helper macro for drivers that don't do
-  * anything special in module init/exit.  This eliminates a lot of
diff --git a/target/linux/layerscape/patches-5.4/701-net-0141-bus-fsl-mc-Extend-ICID-size-from-16bit-to-32bit.patch b/target/linux/layerscape/patches-5.4/701-net-0141-bus-fsl-mc-Extend-ICID-size-from-16bit-to-32bit.patch
deleted file mode 100644
index c7d25f5b58..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0141-bus-fsl-mc-Extend-ICID-size-from-16bit-to-32bit.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 7c5fca3084c38905df08b8f33cf14ad21ab41b77 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Mon, 16 Apr 2018 11:54:46 +0300
-Subject: [PATCH] bus: fsl-mc: Extend ICID size from 16bit to 32bit
-
-Extend the ICID from 16-bit to 32-bit.
-Primary reason for this is enabling DPAA2 drivers
-in Virtual Machine where device-id range is defined
-for DPAA2 devices is 0x10000-0x20000.
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- drivers/bus/fsl-mc/dprc.c           | 2 +-
- drivers/bus/fsl-mc/fsl-mc-bus.c     | 2 +-
- drivers/bus/fsl-mc/fsl-mc-private.h | 5 ++---
- include/linux/fsl/mc.h              | 2 +-
- 4 files changed, 5 insertions(+), 6 deletions(-)
-
---- a/drivers/bus/fsl-mc/dprc.c
-+++ b/drivers/bus/fsl-mc/dprc.c
-@@ -322,7 +322,7 @@ int dprc_get_attributes(struct fsl_mc_io
- 	/* retrieve response parameters */
- 	rsp_params = (struct dprc_rsp_get_attributes *)cmd.params;
- 	attr->container_id = le32_to_cpu(rsp_params->container_id);
--	attr->icid = le16_to_cpu(rsp_params->icid);
-+	attr->icid = le32_to_cpu(rsp_params->icid);
- 	attr->options = le32_to_cpu(rsp_params->options);
- 	attr->portal_id = le32_to_cpu(rsp_params->portal_id);
- 
---- a/drivers/bus/fsl-mc/fsl-mc-bus.c
-+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
-@@ -489,7 +489,7 @@ common_cleanup:
- }
- 
- static int get_dprc_icid(struct fsl_mc_io *mc_io,
--			 int container_id, u16 *icid)
-+			 int container_id, u32 *icid)
- {
- 	struct dprc_attributes attr;
- 	int error;
---- a/drivers/bus/fsl-mc/fsl-mc-private.h
-+++ b/drivers/bus/fsl-mc/fsl-mc-private.h
-@@ -157,8 +157,7 @@ struct dprc_cmd_clear_irq_status {
- struct dprc_rsp_get_attributes {
- 	/* response word 0 */
- 	__le32 container_id;
--	__le16 icid;
--	__le16 pad;
-+	__le32 icid;
- 	/* response word 1 */
- 	__le32 options;
- 	__le32 portal_id;
-@@ -320,7 +319,7 @@ int dprc_clear_irq_status(struct fsl_mc_
-  */
- struct dprc_attributes {
- 	int container_id;
--	u16 icid;
-+	u32 icid;
- 	int portal_id;
- 	u64 options;
- };
---- a/include/linux/fsl/mc.h
-+++ b/include/linux/fsl/mc.h
-@@ -188,7 +188,7 @@ struct fsl_mc_device {
- 	struct device dev;
- 	u64 dma_mask;
- 	u16 flags;
--	u16 icid;
-+	u32 icid;
- 	u16 mc_handle;
- 	struct fsl_mc_io *mc_io;
- 	struct fsl_mc_obj_desc obj_desc;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0142-bus-fsl-mc-Some-apis-are-made-public-for-vfio.patch b/target/linux/layerscape/patches-5.4/701-net-0142-bus-fsl-mc-Some-apis-are-made-public-for-vfio.patch
deleted file mode 100644
index 74d1c2a4eb..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0142-bus-fsl-mc-Some-apis-are-made-public-for-vfio.patch
+++ /dev/null
@@ -1,960 +0,0 @@
-From e8dd5b8ee227cc60f10073faaa0f74b36aa4f40f Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Mon, 16 Apr 2018 12:26:38 +0300
-Subject: [PATCH] bus: fsl-mc: Some apis are made public for vfio
-
-Some of the APIs and data-structures are required for VFIO.
-This patch moves dprc.h to public header files.
-Also some APIs of mc-bus are made public for vfio.
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- drivers/bus/fsl-mc/fsl-mc-allocator.c |   2 +
- drivers/bus/fsl-mc/fsl-mc-bus.c       |   5 +-
- drivers/bus/fsl-mc/fsl-mc-private.h   | 414 ---------------------------------
- include/linux/fsl/mc.h                | 420 ++++++++++++++++++++++++++++++++++
- 4 files changed, 425 insertions(+), 416 deletions(-)
-
---- a/drivers/bus/fsl-mc/fsl-mc-allocator.c
-+++ b/drivers/bus/fsl-mc/fsl-mc-allocator.c
-@@ -549,6 +549,7 @@ void fsl_mc_init_all_resource_pools(stru
- 		mutex_init(&res_pool->mutex);
- 	}
- }
-+EXPORT_SYMBOL_GPL(fsl_mc_init_all_resource_pools);
- 
- static void fsl_mc_cleanup_resource_pool(struct fsl_mc_device *mc_bus_dev,
- 					 enum fsl_mc_pool_type pool_type)
-@@ -573,6 +574,7 @@ void fsl_mc_cleanup_all_resource_pools(s
- 	for (pool_type = 0; pool_type < FSL_MC_NUM_POOL_TYPES; pool_type++)
- 		fsl_mc_cleanup_resource_pool(mc_bus_dev, pool_type);
- }
-+EXPORT_SYMBOL_GPL(fsl_mc_cleanup_all_resource_pools);
- 
- /**
-  * fsl_mc_allocator_probe - callback invoked when an allocatable device is
---- a/drivers/bus/fsl-mc/fsl-mc-bus.c
-+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
-@@ -447,8 +447,8 @@ static int mc_get_version(struct fsl_mc_
- /**
-  * fsl_mc_get_root_dprc - function to traverse to the root dprc
-  */
--static void fsl_mc_get_root_dprc(struct device *dev,
--				 struct device **root_dprc_dev)
-+void fsl_mc_get_root_dprc(struct device *dev,
-+			  struct device **root_dprc_dev)
- {
- 	if (!dev) {
- 		*root_dprc_dev = NULL;
-@@ -460,6 +460,7 @@ static void fsl_mc_get_root_dprc(struct
- 			*root_dprc_dev = (*root_dprc_dev)->parent;
- 	}
- }
-+EXPORT_SYMBOL_GPL(fsl_mc_get_root_dprc);
- 
- static int get_dprc_attr(struct fsl_mc_io *mc_io,
- 			 int container_id, struct dprc_attributes *attr)
---- a/drivers/bus/fsl-mc/fsl-mc-private.h
-+++ b/drivers/bus/fsl-mc/fsl-mc-private.h
-@@ -10,8 +10,6 @@
- 
- #include <linux/fsl/mc.h>
- #include <linux/mutex.h>
--#include <linux/ioctl.h>
--#include <linux/miscdevice.h>
- 
- /*
-  * Data Path Management Complex (DPMNG) General API
-@@ -72,339 +70,6 @@ int dpmcp_reset(struct fsl_mc_io *mc_io,
- 		u16 token);
- 
- /*
-- * Data Path Resource Container (DPRC) API
-- */
--
--/* Minimal supported DPRC Version */
--#define DPRC_MIN_VER_MAJOR			6
--#define DPRC_MIN_VER_MINOR			0
--
--/* DPRC command versioning */
--#define DPRC_CMD_BASE_VERSION			1
--#define DPRC_CMD_2ND_VERSION			2
--#define DPRC_CMD_ID_OFFSET			4
--
--#define DPRC_CMD(id)	(((id) << DPRC_CMD_ID_OFFSET) | DPRC_CMD_BASE_VERSION)
--#define DPRC_CMD_V2(id)	(((id) << DPRC_CMD_ID_OFFSET) | DPRC_CMD_2ND_VERSION)
--
--/* DPRC command IDs */
--#define DPRC_CMDID_CLOSE                        DPRC_CMD(0x800)
--#define DPRC_CMDID_OPEN                         DPRC_CMD(0x805)
--#define DPRC_CMDID_GET_API_VERSION              DPRC_CMD(0xa05)
--
--#define DPRC_CMDID_GET_ATTR                     DPRC_CMD(0x004)
--#define DPRC_CMDID_RESET_CONT                   DPRC_CMD(0x005)
--
--#define DPRC_CMDID_SET_IRQ                      DPRC_CMD(0x010)
--#define DPRC_CMDID_SET_IRQ_ENABLE               DPRC_CMD(0x012)
--#define DPRC_CMDID_SET_IRQ_MASK                 DPRC_CMD(0x014)
--#define DPRC_CMDID_GET_IRQ_STATUS               DPRC_CMD(0x016)
--#define DPRC_CMDID_CLEAR_IRQ_STATUS             DPRC_CMD(0x017)
--
--#define DPRC_CMDID_GET_CONT_ID                  DPRC_CMD(0x830)
--#define DPRC_CMDID_GET_OBJ_COUNT                DPRC_CMD(0x159)
--#define DPRC_CMDID_GET_OBJ                      DPRC_CMD(0x15A)
--#define DPRC_CMDID_GET_OBJ_REG                  DPRC_CMD(0x15E)
--#define DPRC_CMDID_GET_OBJ_REG_V2               DPRC_CMD_V2(0x15E)
--#define DPRC_CMDID_SET_OBJ_IRQ                  DPRC_CMD(0x15F)
--
--struct dprc_cmd_open {
--	__le32 container_id;
--};
--
--struct dprc_cmd_reset_container {
--	__le32 child_container_id;
--};
--
--struct dprc_cmd_set_irq {
--	/* cmd word 0 */
--	__le32 irq_val;
--	u8 irq_index;
--	u8 pad[3];
--	/* cmd word 1 */
--	__le64 irq_addr;
--	/* cmd word 2 */
--	__le32 irq_num;
--};
--
--#define DPRC_ENABLE		0x1
--
--struct dprc_cmd_set_irq_enable {
--	u8 enable;
--	u8 pad[3];
--	u8 irq_index;
--};
--
--struct dprc_cmd_set_irq_mask {
--	__le32 mask;
--	u8 irq_index;
--};
--
--struct dprc_cmd_get_irq_status {
--	__le32 status;
--	u8 irq_index;
--};
--
--struct dprc_rsp_get_irq_status {
--	__le32 status;
--};
--
--struct dprc_cmd_clear_irq_status {
--	__le32 status;
--	u8 irq_index;
--};
--
--struct dprc_rsp_get_attributes {
--	/* response word 0 */
--	__le32 container_id;
--	__le32 icid;
--	/* response word 1 */
--	__le32 options;
--	__le32 portal_id;
--};
--
--struct dprc_rsp_get_obj_count {
--	__le32 pad;
--	__le32 obj_count;
--};
--
--struct dprc_cmd_get_obj {
--	__le32 obj_index;
--};
--
--struct dprc_rsp_get_obj {
--	/* response word 0 */
--	__le32 pad0;
--	__le32 id;
--	/* response word 1 */
--	__le16 vendor;
--	u8 irq_count;
--	u8 region_count;
--	__le32 state;
--	/* response word 2 */
--	__le16 version_major;
--	__le16 version_minor;
--	__le16 flags;
--	__le16 pad1;
--	/* response word 3-4 */
--	u8 type[16];
--	/* response word 5-6 */
--	u8 label[16];
--};
--
--struct dprc_cmd_get_obj_region {
--	/* cmd word 0 */
--	__le32 obj_id;
--	__le16 pad0;
--	u8 region_index;
--	u8 pad1;
--	/* cmd word 1-2 */
--	__le64 pad2[2];
--	/* cmd word 3-4 */
--	u8 obj_type[16];
--};
--
--struct dprc_rsp_get_obj_region {
--	/* response word 0 */
--	__le64 pad0;
--	/* response word 1 */
--	__le64 base_offset;
--	/* response word 2 */
--	__le32 size;
--	u8 type;
--	u8 pad2[3];
--	/* response word 3 */
--	__le32 flags;
--	__le32 pad3;
--	/* response word 4 */
--	/* base_addr may be zero if older MC firmware is used */
--	__le64 base_addr;
--};
--
--struct dprc_cmd_set_obj_irq {
--	/* cmd word 0 */
--	__le32 irq_val;
--	u8 irq_index;
--	u8 pad[3];
--	/* cmd word 1 */
--	__le64 irq_addr;
--	/* cmd word 2 */
--	__le32 irq_num;
--	__le32 obj_id;
--	/* cmd word 3-4 */
--	u8 obj_type[16];
--};
--
--/*
-- * DPRC API for managing and querying DPAA resources
-- */
--int dprc_open(struct fsl_mc_io *mc_io,
--	      u32 cmd_flags,
--	      int container_id,
--	      u16 *token);
--
--int dprc_close(struct fsl_mc_io *mc_io,
--	       u32 cmd_flags,
--	       u16 token);
--
--/* DPRC IRQ events */
--
--/* IRQ event - Indicates that a new object added to the container */
--#define DPRC_IRQ_EVENT_OBJ_ADDED		0x00000001
--/* IRQ event - Indicates that an object was removed from the container */
--#define DPRC_IRQ_EVENT_OBJ_REMOVED		0x00000002
--/*
-- * IRQ event - Indicates that one of the descendant containers that opened by
-- * this container is destroyed
-- */
--#define DPRC_IRQ_EVENT_CONTAINER_DESTROYED	0x00000010
--
--/*
-- * IRQ event - Indicates that on one of the container's opened object is
-- * destroyed
-- */
--#define DPRC_IRQ_EVENT_OBJ_DESTROYED		0x00000020
--
--/* Irq event - Indicates that object is created at the container */
--#define DPRC_IRQ_EVENT_OBJ_CREATED		0x00000040
--
--/**
-- * struct dprc_irq_cfg - IRQ configuration
-- * @paddr:	Address that must be written to signal a message-based interrupt
-- * @val:	Value to write into irq_addr address
-- * @irq_num:	A user defined number associated with this IRQ
-- */
--struct dprc_irq_cfg {
--	     phys_addr_t paddr;
--	     u32 val;
--	     int irq_num;
--};
--
--int dprc_set_irq(struct fsl_mc_io *mc_io,
--		 u32 cmd_flags,
--		 u16 token,
--		 u8 irq_index,
--		 struct dprc_irq_cfg *irq_cfg);
--
--int dprc_set_irq_enable(struct fsl_mc_io *mc_io,
--			u32 cmd_flags,
--			u16 token,
--			u8 irq_index,
--			u8 en);
--
--int dprc_set_irq_mask(struct fsl_mc_io *mc_io,
--		      u32 cmd_flags,
--		      u16 token,
--		      u8 irq_index,
--		      u32 mask);
--
--int dprc_get_irq_status(struct fsl_mc_io *mc_io,
--			u32 cmd_flags,
--			u16 token,
--			u8 irq_index,
--			u32 *status);
--
--int dprc_clear_irq_status(struct fsl_mc_io *mc_io,
--			  u32 cmd_flags,
--			  u16 token,
--			  u8 irq_index,
--			  u32 status);
--
--/**
-- * struct dprc_attributes - Container attributes
-- * @container_id: Container's ID
-- * @icid: Container's ICID
-- * @portal_id: Container's portal ID
-- * @options: Container's options as set at container's creation
-- */
--struct dprc_attributes {
--	int container_id;
--	u32 icid;
--	int portal_id;
--	u64 options;
--};
--
--int dprc_get_attributes(struct fsl_mc_io *mc_io,
--			u32 cmd_flags,
--			u16 token,
--			struct dprc_attributes *attributes);
--
--int dprc_get_obj_count(struct fsl_mc_io *mc_io,
--		       u32 cmd_flags,
--		       u16 token,
--		       int *obj_count);
--
--int dprc_get_obj(struct fsl_mc_io *mc_io,
--		 u32 cmd_flags,
--		 u16 token,
--		 int obj_index,
--		 struct fsl_mc_obj_desc *obj_desc);
--
--int dprc_set_obj_irq(struct fsl_mc_io *mc_io,
--		     u32 cmd_flags,
--		     u16 token,
--		     char *obj_type,
--		     int obj_id,
--		     u8 irq_index,
--		     struct dprc_irq_cfg *irq_cfg);
--
--/* Region flags */
--/* Cacheable - Indicates that region should be mapped as cacheable */
--#define DPRC_REGION_CACHEABLE	0x00000001
--#define DPRC_REGION_SHAREABLE	0x00000002
--
--/**
-- * enum dprc_region_type - Region type
-- * @DPRC_REGION_TYPE_MC_PORTAL: MC portal region
-- * @DPRC_REGION_TYPE_QBMAN_PORTAL: Qbman portal region
-- */
--enum dprc_region_type {
--	DPRC_REGION_TYPE_MC_PORTAL,
--	DPRC_REGION_TYPE_QBMAN_PORTAL,
--	DPRC_REGION_TYPE_QBMAN_MEM_BACKED_PORTAL
--};
--
--/**
-- * struct dprc_region_desc - Mappable region descriptor
-- * @base_offset: Region offset from region's base address.
-- *	For DPMCP and DPRC objects, region base is offset from SoC MC portals
-- *	base address; For DPIO, region base is offset from SoC QMan portals
-- *	base address
-- * @size: Region size (in bytes)
-- * @flags: Region attributes
-- * @type: Portal region type
-- */
--struct dprc_region_desc {
--	u32 base_offset;
--	u32 size;
--	u32 flags;
--	enum dprc_region_type type;
--	u64 base_address;
--};
--
--int dprc_get_obj_region(struct fsl_mc_io *mc_io,
--			u32 cmd_flags,
--			u16 token,
--			char *obj_type,
--			int obj_id,
--			u8 region_index,
--			struct dprc_region_desc *region_desc);
--
--int dprc_get_api_version(struct fsl_mc_io *mc_io,
--			 u32 cmd_flags,
--			 u16 *major_ver,
--			 u16 *minor_ver);
--
--int dprc_get_container_id(struct fsl_mc_io *mc_io,
--			  u32 cmd_flags,
--			  int *container_id);
--
--int dprc_reset_container(struct fsl_mc_io *mc_io,
--			 u32 cmd_flags,
--			 u16 token,
--			 int child_container_id);
--
--/*
-  * Data Path Buffer Pool (DPBP) API
-  */
- 
-@@ -491,70 +156,6 @@ struct dpcon_cmd_set_notification {
- 	__le64 user_ctx;
- };
- 
--/**
-- * Maximum number of total IRQs that can be pre-allocated for an MC bus'
-- * IRQ pool
-- */
--#define FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS	256
--
--/**
-- * struct fsl_mc_resource_pool - Pool of MC resources of a given
-- * type
-- * @type: type of resources in the pool
-- * @max_count: maximum number of resources in the pool
-- * @free_count: number of free resources in the pool
-- * @mutex: mutex to serialize access to the pool's free list
-- * @free_list: anchor node of list of free resources in the pool
-- * @mc_bus: pointer to the MC bus that owns this resource pool
-- */
--struct fsl_mc_resource_pool {
--	enum fsl_mc_pool_type type;
--	int max_count;
--	int free_count;
--	struct mutex mutex;	/* serializes access to free_list */
--	struct list_head free_list;
--	struct fsl_mc_bus *mc_bus;
--};
--
--/**
-- * struct fsl_mc_uapi - information associated with a device file
-- * @misc: struct miscdevice linked to the root dprc
-- * @device: newly created device in /dev
-- * @mutex: mutex lock to serialize the open/release operations
-- * @local_instance_in_use: local MC I/O instance in use or not
-- * @static_mc_io: pointer to the static MC I/O object
-- */
--struct fsl_mc_uapi {
--	struct miscdevice misc;
--	struct device *device;
--	struct mutex mutex; /* serialize open/release operations */
--	u32 local_instance_in_use;
--	struct fsl_mc_io *static_mc_io;
--};
--
--/**
-- * struct fsl_mc_bus - logical bus that corresponds to a physical DPRC
-- * @mc_dev: fsl-mc device for the bus device itself.
-- * @resource_pools: array of resource pools (one pool per resource type)
-- * for this MC bus. These resources represent allocatable entities
-- * from the physical DPRC.
-- * @irq_resources: Pointer to array of IRQ objects for the IRQ pool
-- * @scan_mutex: Serializes bus scanning
-- * @dprc_attr: DPRC attributes
-- * @uapi_misc: struct that abstracts the interaction with userspace
-- */
--struct fsl_mc_bus {
--	struct fsl_mc_device mc_dev;
--	struct fsl_mc_resource_pool resource_pools[FSL_MC_NUM_POOL_TYPES];
--	struct fsl_mc_device_irq *irq_resources;
--	struct mutex scan_mutex;    /* serializes bus scanning */
--	struct dprc_attributes dprc_attr;
--	struct fsl_mc_uapi uapi_misc;
--};
--
--#define to_fsl_mc_bus(_mc_dev) \
--	container_of(_mc_dev, struct fsl_mc_bus, mc_dev)
--
- int __must_check fsl_mc_device_add(struct fsl_mc_obj_desc *obj_desc,
- 				   struct fsl_mc_io *mc_io,
- 				   struct device *parent_dev,
-@@ -565,17 +166,10 @@ int __init dprc_driver_init(void);
- 
- void dprc_driver_exit(void);
- 
--int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev,
--		      const char *driver_override,
--		      unsigned int *total_irq_count);
- int __init fsl_mc_allocator_driver_init(void);
- 
- void fsl_mc_allocator_driver_exit(void);
- 
--void fsl_mc_init_all_resource_pools(struct fsl_mc_device *mc_bus_dev);
--
--void fsl_mc_cleanup_all_resource_pools(struct fsl_mc_device *mc_bus_dev);
--
- int __must_check fsl_mc_resource_allocate(struct fsl_mc_bus *mc_bus,
- 					  enum fsl_mc_pool_type pool_type,
- 					  struct fsl_mc_resource
-@@ -588,14 +182,6 @@ int fsl_mc_msi_domain_alloc_irqs(struct
- 
- void fsl_mc_msi_domain_free_irqs(struct device *dev);
- 
--int fsl_mc_find_msi_domain(struct device *mc_platform_dev,
--			   struct irq_domain **mc_msi_domain);
--
--int fsl_mc_populate_irq_pool(struct fsl_mc_bus *mc_bus,
--			     unsigned int irq_count);
--
--void fsl_mc_cleanup_irq_pool(struct fsl_mc_bus *mc_bus);
--
- int __must_check fsl_create_mc_io(struct device *dev,
- 				  phys_addr_t mc_portal_phys_addr,
- 				  u32 mc_portal_size,
---- a/include/linux/fsl/mc.h
-+++ b/include/linux/fsl/mc.h
-@@ -12,6 +12,8 @@
- #include <linux/device.h>
- #include <linux/mod_devicetable.h>
- #include <linux/interrupt.h>
-+#include <linux/ioctl.h>
-+#include <linux/miscdevice.h>
- #include <uapi/linux/fsl_mc.h>
- 
- #define FSL_MC_VENDOR_FREESCALE	0x1957
-@@ -49,6 +51,9 @@ struct fsl_mc_driver {
- #define to_fsl_mc_driver(_drv) \
- 	container_of(_drv, struct fsl_mc_driver, driver)
- 
-+#define to_fsl_mc_bus(_mc_dev) \
-+	container_of(_mc_dev, struct fsl_mc_bus, mc_dev)
-+
- /**
-  * enum fsl_mc_pool_type - Types of allocatable MC bus resources
-  *
-@@ -469,6 +474,339 @@ static inline bool is_fsl_mc_bus_dpseci(
- }
- 
- /*
-+ * Data Path Resource Container (DPRC) API
-+ */
-+
-+/* Minimal supported DPRC Version */
-+#define DPRC_MIN_VER_MAJOR			6
-+#define DPRC_MIN_VER_MINOR			0
-+
-+/* DPRC command versioning */
-+#define DPRC_CMD_BASE_VERSION			1
-+#define DPRC_CMD_2ND_VERSION			2
-+#define DPRC_CMD_ID_OFFSET			4
-+
-+#define DPRC_CMD(id)	(((id) << DPRC_CMD_ID_OFFSET) | DPRC_CMD_BASE_VERSION)
-+#define DPRC_CMD_V2(id)	(((id) << DPRC_CMD_ID_OFFSET) | DPRC_CMD_2ND_VERSION)
-+
-+/* DPRC command IDs */
-+#define DPRC_CMDID_CLOSE                        DPRC_CMD(0x800)
-+#define DPRC_CMDID_OPEN                         DPRC_CMD(0x805)
-+#define DPRC_CMDID_GET_API_VERSION              DPRC_CMD(0xa05)
-+
-+#define DPRC_CMDID_GET_ATTR                     DPRC_CMD(0x004)
-+#define DPRC_CMDID_RESET_CONT                   DPRC_CMD(0x005)
-+
-+#define DPRC_CMDID_SET_IRQ                      DPRC_CMD(0x010)
-+#define DPRC_CMDID_SET_IRQ_ENABLE               DPRC_CMD(0x012)
-+#define DPRC_CMDID_SET_IRQ_MASK                 DPRC_CMD(0x014)
-+#define DPRC_CMDID_GET_IRQ_STATUS               DPRC_CMD(0x016)
-+#define DPRC_CMDID_CLEAR_IRQ_STATUS             DPRC_CMD(0x017)
-+
-+#define DPRC_CMDID_GET_CONT_ID                  DPRC_CMD(0x830)
-+#define DPRC_CMDID_GET_OBJ_COUNT                DPRC_CMD(0x159)
-+#define DPRC_CMDID_GET_OBJ                      DPRC_CMD(0x15A)
-+#define DPRC_CMDID_GET_OBJ_REG                  DPRC_CMD(0x15E)
-+#define DPRC_CMDID_GET_OBJ_REG_V2               DPRC_CMD_V2(0x15E)
-+#define DPRC_CMDID_SET_OBJ_IRQ                  DPRC_CMD(0x15F)
-+
-+struct dprc_cmd_open {
-+	__le32 container_id;
-+};
-+
-+struct dprc_cmd_reset_container {
-+	__le32 child_container_id;
-+};
-+
-+struct dprc_cmd_set_irq {
-+	/* cmd word 0 */
-+	__le32 irq_val;
-+	u8 irq_index;
-+	u8 pad[3];
-+	/* cmd word 1 */
-+	__le64 irq_addr;
-+	/* cmd word 2 */
-+	__le32 irq_num;
-+};
-+
-+#define DPRC_ENABLE		0x1
-+
-+struct dprc_cmd_set_irq_enable {
-+	u8 enable;
-+	u8 pad[3];
-+	u8 irq_index;
-+};
-+
-+struct dprc_cmd_set_irq_mask {
-+	__le32 mask;
-+	u8 irq_index;
-+};
-+
-+struct dprc_cmd_get_irq_status {
-+	__le32 status;
-+	u8 irq_index;
-+};
-+
-+struct dprc_rsp_get_irq_status {
-+	__le32 status;
-+};
-+
-+struct dprc_cmd_clear_irq_status {
-+	__le32 status;
-+	u8 irq_index;
-+};
-+
-+struct dprc_rsp_get_attributes {
-+	/* response word 0 */
-+	__le32 container_id;
-+	__le32 icid;
-+	/* response word 1 */
-+	__le32 options;
-+	__le32 portal_id;
-+};
-+
-+struct dprc_rsp_get_obj_count {
-+	__le32 pad;
-+	__le32 obj_count;
-+};
-+
-+struct dprc_cmd_get_obj {
-+	__le32 obj_index;
-+};
-+
-+struct dprc_rsp_get_obj {
-+	/* response word 0 */
-+	__le32 pad0;
-+	__le32 id;
-+	/* response word 1 */
-+	__le16 vendor;
-+	u8 irq_count;
-+	u8 region_count;
-+	__le32 state;
-+	/* response word 2 */
-+	__le16 version_major;
-+	__le16 version_minor;
-+	__le16 flags;
-+	__le16 pad1;
-+	/* response word 3-4 */
-+	u8 type[16];
-+	/* response word 5-6 */
-+	u8 label[16];
-+};
-+
-+struct dprc_cmd_get_obj_region {
-+	/* cmd word 0 */
-+	__le32 obj_id;
-+	__le16 pad0;
-+	u8 region_index;
-+	u8 pad1;
-+	/* cmd word 1-2 */
-+	__le64 pad2[2];
-+	/* cmd word 3-4 */
-+	u8 obj_type[16];
-+};
-+
-+struct dprc_rsp_get_obj_region {
-+	/* response word 0 */
-+	__le64 pad0;
-+	/* response word 1 */
-+	__le64 base_offset;
-+	/* response word 2 */
-+	__le32 size;
-+	u8 type;
-+	u8 pad2[3];
-+	/* response word 3 */
-+	__le32 flags;
-+	__le32 pad3;
-+	/* response word 4 */
-+	/* base_addr may be zero if older MC firmware is used */
-+	__le64 base_addr;
-+};
-+
-+struct dprc_cmd_set_obj_irq {
-+	/* cmd word 0 */
-+	__le32 irq_val;
-+	u8 irq_index;
-+	u8 pad[3];
-+	/* cmd word 1 */
-+	__le64 irq_addr;
-+	/* cmd word 2 */
-+	__le32 irq_num;
-+	__le32 obj_id;
-+	/* cmd word 3-4 */
-+	u8 obj_type[16];
-+};
-+
-+/*
-+ * DPRC API for managing and querying DPAA resources
-+ */
-+int dprc_open(struct fsl_mc_io *mc_io,
-+	      u32 cmd_flags,
-+	      int container_id,
-+	      u16 *token);
-+
-+int dprc_close(struct fsl_mc_io *mc_io,
-+	       u32 cmd_flags,
-+	       u16 token);
-+
-+/* DPRC IRQ events */
-+
-+/* IRQ event - Indicates that a new object added to the container */
-+#define DPRC_IRQ_EVENT_OBJ_ADDED		0x00000001
-+/* IRQ event - Indicates that an object was removed from the container */
-+#define DPRC_IRQ_EVENT_OBJ_REMOVED		0x00000002
-+/*
-+ * IRQ event - Indicates that one of the descendant containers that opened by
-+ * this container is destroyed
-+ */
-+#define DPRC_IRQ_EVENT_CONTAINER_DESTROYED	0x00000010
-+
-+/*
-+ * IRQ event - Indicates that on one of the container's opened object is
-+ * destroyed
-+ */
-+#define DPRC_IRQ_EVENT_OBJ_DESTROYED		0x00000020
-+
-+/* Irq event - Indicates that object is created at the container */
-+#define DPRC_IRQ_EVENT_OBJ_CREATED		0x00000040
-+
-+/**
-+ * struct dprc_irq_cfg - IRQ configuration
-+ * @paddr:	Address that must be written to signal a message-based interrupt
-+ * @val:	Value to write into irq_addr address
-+ * @irq_num:	A user defined number associated with this IRQ
-+ */
-+struct dprc_irq_cfg {
-+	     phys_addr_t paddr;
-+	     u32 val;
-+	     int irq_num;
-+};
-+
-+int dprc_set_irq(struct fsl_mc_io *mc_io,
-+		 u32 cmd_flags,
-+		 u16 token,
-+		 u8 irq_index,
-+		 struct dprc_irq_cfg *irq_cfg);
-+
-+int dprc_set_irq_enable(struct fsl_mc_io *mc_io,
-+			u32 cmd_flags,
-+			u16 token,
-+			u8 irq_index,
-+			u8 en);
-+
-+int dprc_set_irq_mask(struct fsl_mc_io *mc_io,
-+		      u32 cmd_flags,
-+		      u16 token,
-+		      u8 irq_index,
-+		      u32 mask);
-+
-+int dprc_get_irq_status(struct fsl_mc_io *mc_io,
-+			u32 cmd_flags,
-+			u16 token,
-+			u8 irq_index,
-+			u32 *status);
-+
-+int dprc_clear_irq_status(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  u8 irq_index,
-+			  u32 status);
-+
-+/**
-+ * struct dprc_attributes - Container attributes
-+ * @container_id: Container's ID
-+ * @icid: Container's ICID
-+ * @portal_id: Container's portal ID
-+ * @options: Container's options as set at container's creation
-+ */
-+struct dprc_attributes {
-+	int container_id;
-+	u32 icid;
-+	int portal_id;
-+	u64 options;
-+};
-+
-+int dprc_get_attributes(struct fsl_mc_io *mc_io,
-+			u32 cmd_flags,
-+			u16 token,
-+			struct dprc_attributes *attributes);
-+
-+int dprc_get_obj_count(struct fsl_mc_io *mc_io,
-+		       u32 cmd_flags,
-+		       u16 token,
-+		       int *obj_count);
-+
-+int dprc_get_obj(struct fsl_mc_io *mc_io,
-+		 u32 cmd_flags,
-+		 u16 token,
-+		 int obj_index,
-+		 struct fsl_mc_obj_desc *obj_desc);
-+
-+int dprc_set_obj_irq(struct fsl_mc_io *mc_io,
-+		     u32 cmd_flags,
-+		     u16 token,
-+		     char *obj_type,
-+		     int obj_id,
-+		     u8 irq_index,
-+		     struct dprc_irq_cfg *irq_cfg);
-+
-+/* Region flags */
-+/* Cacheable - Indicates that region should be mapped as cacheable */
-+#define DPRC_REGION_CACHEABLE	0x00000001
-+#define DPRC_REGION_SHAREABLE	0x00000002
-+
-+/**
-+ * enum dprc_region_type - Region type
-+ * @DPRC_REGION_TYPE_MC_PORTAL: MC portal region
-+ * @DPRC_REGION_TYPE_QBMAN_PORTAL: Qbman portal region
-+ */
-+enum dprc_region_type {
-+	DPRC_REGION_TYPE_MC_PORTAL,
-+	DPRC_REGION_TYPE_QBMAN_PORTAL,
-+	DPRC_REGION_TYPE_QBMAN_MEM_BACKED_PORTAL
-+};
-+
-+/**
-+ * struct dprc_region_desc - Mappable region descriptor
-+ * @base_offset: Region offset from region's base address.
-+ *	For DPMCP and DPRC objects, region base is offset from SoC MC portals
-+ *	base address; For DPIO, region base is offset from SoC QMan portals
-+ *	base address
-+ * @size: Region size (in bytes)
-+ * @flags: Region attributes
-+ * @type: Portal region type
-+ */
-+struct dprc_region_desc {
-+	u32 base_offset;
-+	u32 size;
-+	u32 flags;
-+	enum dprc_region_type type;
-+	u64 base_address;
-+};
-+
-+int dprc_get_obj_region(struct fsl_mc_io *mc_io,
-+			u32 cmd_flags,
-+			u16 token,
-+			char *obj_type,
-+			int obj_id,
-+			u8 region_index,
-+			struct dprc_region_desc *region_desc);
-+
-+int dprc_get_api_version(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 *major_ver,
-+			 u16 *minor_ver);
-+
-+int dprc_get_container_id(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  int *container_id);
-+
-+int dprc_reset_container(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token,
-+			 int child_container_id);
-+
-+/*
-  * Data Path Buffer Pool (DPBP) API
-  * Contains initialization APIs and runtime control APIs for DPBP
-  */
-@@ -576,4 +914,86 @@ int dpcon_set_notification(struct fsl_mc
- 			   u16 token,
- 			   struct dpcon_notification_cfg *cfg);
- 
-+struct irq_domain;
-+struct msi_domain_info;
-+
-+/**
-+ * Maximum number of total IRQs that can be pre-allocated for an MC bus'
-+ * IRQ pool
-+ */
-+#define FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS	256
-+
-+/**
-+ * struct fsl_mc_resource_pool - Pool of MC resources of a given
-+ * type
-+ * @type: type of resources in the pool
-+ * @max_count: maximum number of resources in the pool
-+ * @free_count: number of free resources in the pool
-+ * @mutex: mutex to serialize access to the pool's free list
-+ * @free_list: anchor node of list of free resources in the pool
-+ * @mc_bus: pointer to the MC bus that owns this resource pool
-+ */
-+struct fsl_mc_resource_pool {
-+	enum fsl_mc_pool_type type;
-+	int max_count;
-+	int free_count;
-+	struct mutex mutex;	/* serializes access to free_list */
-+	struct list_head free_list;
-+	struct fsl_mc_bus *mc_bus;
-+};
-+
-+/**
-+ * struct fsl_mc_uapi - information associated with a device file
-+ * @misc: struct miscdevice linked to the root dprc
-+ * @device: newly created device in /dev
-+ * @mutex: mutex lock to serialize the open/release operations
-+ * @local_instance_in_use: local MC I/O instance in use or not
-+ * @static_mc_io: pointer to the static MC I/O object
-+ */
-+struct fsl_mc_uapi {
-+	struct miscdevice misc;
-+	struct device *device;
-+	struct mutex mutex; /* serialize open/release operations */
-+	u32 local_instance_in_use;
-+	struct fsl_mc_io *static_mc_io;
-+};
-+
-+/**
-+ * struct fsl_mc_bus - logical bus that corresponds to a physical DPRC
-+ * @mc_dev: fsl-mc device for the bus device itself.
-+ * @resource_pools: array of resource pools (one pool per resource type)
-+ * for this MC bus. These resources represent allocatable entities
-+ * from the physical DPRC.
-+ * @irq_resources: Pointer to array of IRQ objects for the IRQ pool
-+ * @scan_mutex: Serializes bus scanning
-+ * @dprc_attr: DPRC attributes
-+ * @uapi_misc: struct that abstracts the interaction with userspace
-+ */
-+struct fsl_mc_bus {
-+	struct fsl_mc_device mc_dev;
-+	struct fsl_mc_resource_pool resource_pools[FSL_MC_NUM_POOL_TYPES];
-+	struct fsl_mc_device_irq *irq_resources;
-+	struct mutex scan_mutex;    /* serializes bus scanning */
-+	struct dprc_attributes dprc_attr;
-+	struct fsl_mc_uapi uapi_misc;
-+};
-+
-+int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev,
-+		      const char *driver_override,
-+		      unsigned int *total_irq_count);
-+
-+int fsl_mc_find_msi_domain(struct device *mc_platform_dev,
-+			   struct irq_domain **mc_msi_domain);
-+
-+int fsl_mc_populate_irq_pool(struct fsl_mc_bus *mc_bus,
-+			     unsigned int irq_count);
-+
-+void fsl_mc_cleanup_irq_pool(struct fsl_mc_bus *mc_bus);
-+
-+void fsl_mc_init_all_resource_pools(struct fsl_mc_device *mc_bus_dev);
-+
-+void fsl_mc_cleanup_all_resource_pools(struct fsl_mc_device *mc_bus_dev);
-+
-+void fsl_mc_get_root_dprc(struct device *dev, struct device **root_dprc_dev);
-+
- #endif /* _FSL_MC_H_ */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0143-bus-fsl-mc-add-support-for-dpdmux-device-type.patch b/target/linux/layerscape/patches-5.4/701-net-0143-bus-fsl-mc-add-support-for-dpdmux-device-type.patch
deleted file mode 100644
index d5cf3c5b7d..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0143-bus-fsl-mc-add-support-for-dpdmux-device-type.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 5b4e5d281abfa29cf3808b4a3a3ab994f80d6cca Mon Sep 17 00:00:00 2001
-From: Razvan Stefanescu <razvan.stefanescu@nxp.com>
-Date: Tue, 24 Apr 2018 14:51:56 +0300
-Subject: [PATCH] bus: fsl-mc: add support for dpdmux device type
-
-Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
----
- drivers/bus/fsl-mc/fsl-mc-bus.c | 5 +++++
- include/linux/fsl/mc.h          | 6 ++++++
- 2 files changed, 11 insertions(+)
-
---- a/drivers/bus/fsl-mc/fsl-mc-bus.c
-+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
-@@ -270,6 +270,10 @@ struct device_type fsl_mc_bus_dpsw_type
- 	.name = "fsl_mc_bus_dpsw"
- };
- 
-+struct device_type fsl_mc_bus_dpdmux_type = {
-+	.name = "fsl_mc_bus_dpdmux"
-+};
-+
- struct device_type fsl_mc_bus_dpbp_type = {
- 	.name = "fsl_mc_bus_dpbp"
- };
-@@ -304,6 +308,7 @@ static struct device_type *fsl_mc_get_de
- 		{ &fsl_mc_bus_dpni_type, "dpni" },
- 		{ &fsl_mc_bus_dpio_type, "dpio" },
- 		{ &fsl_mc_bus_dpsw_type, "dpsw" },
-+		{ &fsl_mc_bus_dpdmux_type, "dpdmux" },
- 		{ &fsl_mc_bus_dpbp_type, "dpbp" },
- 		{ &fsl_mc_bus_dpcon_type, "dpcon" },
- 		{ &fsl_mc_bus_dpmcp_type, "dpmcp" },
---- a/include/linux/fsl/mc.h
-+++ b/include/linux/fsl/mc.h
-@@ -416,6 +416,7 @@ extern struct device_type fsl_mc_bus_dpr
- extern struct device_type fsl_mc_bus_dpni_type;
- extern struct device_type fsl_mc_bus_dpio_type;
- extern struct device_type fsl_mc_bus_dpsw_type;
-+extern struct device_type fsl_mc_bus_dpdmux_type;
- extern struct device_type fsl_mc_bus_dpbp_type;
- extern struct device_type fsl_mc_bus_dpcon_type;
- extern struct device_type fsl_mc_bus_dpmcp_type;
-@@ -443,6 +444,11 @@ static inline bool is_fsl_mc_bus_dpsw(co
- 	return mc_dev->dev.type == &fsl_mc_bus_dpsw_type;
- }
- 
-+static inline bool is_fsl_mc_bus_dpdmux(const struct fsl_mc_device *mc_dev)
-+{
-+	return mc_dev->dev.type == &fsl_mc_bus_dpdmux_type;
-+}
-+
- static inline bool is_fsl_mc_bus_dpbp(const struct fsl_mc_device *mc_dev)
- {
- 	return mc_dev->dev.type == &fsl_mc_bus_dpbp_type;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0144-bus-fsl-mc-add-support-for-dpdcei-device-type.patch b/target/linux/layerscape/patches-5.4/701-net-0144-bus-fsl-mc-add-support-for-dpdcei-device-type.patch
deleted file mode 100644
index 0ab2421c47..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0144-bus-fsl-mc-add-support-for-dpdcei-device-type.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 6de672cdae08f6dbd94c115481f3472a7af50c19 Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Wed, 25 Apr 2018 13:35:16 +0300
-Subject: [PATCH] bus: fsl-mc: add support for dpdcei device type
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
----
- drivers/bus/fsl-mc/fsl-mc-bus.c | 5 +++++
- include/linux/fsl/mc.h          | 6 ++++++
- 2 files changed, 11 insertions(+)
-
---- a/drivers/bus/fsl-mc/fsl-mc-bus.c
-+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
-@@ -298,6 +298,10 @@ struct device_type fsl_mc_bus_dpseci_typ
- 	.name = "fsl_mc_bus_dpseci"
- };
- 
-+struct device_type fsl_mc_bus_dpdcei_type = {
-+	.name = "fsl_mc_bus_dpdcei"
-+};
-+
- static struct device_type *fsl_mc_get_device_type(const char *type)
- {
- 	static const struct {
-@@ -315,6 +319,7 @@ static struct device_type *fsl_mc_get_de
- 		{ &fsl_mc_bus_dpmac_type, "dpmac" },
- 		{ &fsl_mc_bus_dprtc_type, "dprtc" },
- 		{ &fsl_mc_bus_dpseci_type, "dpseci" },
-+		{ &fsl_mc_bus_dpdcei_type, "dpdcei" },
- 		{ NULL, NULL }
- 	};
- 	int i;
---- a/include/linux/fsl/mc.h
-+++ b/include/linux/fsl/mc.h
-@@ -423,6 +423,7 @@ extern struct device_type fsl_mc_bus_dpm
- extern struct device_type fsl_mc_bus_dpmac_type;
- extern struct device_type fsl_mc_bus_dprtc_type;
- extern struct device_type fsl_mc_bus_dpseci_type;
-+extern struct device_type fsl_mc_bus_dpdcei_type;
- 
- static inline bool is_fsl_mc_bus_dprc(const struct fsl_mc_device *mc_dev)
- {
-@@ -479,6 +480,11 @@ static inline bool is_fsl_mc_bus_dpseci(
- 	return mc_dev->dev.type == &fsl_mc_bus_dpseci_type;
- }
- 
-+static inline bool is_fsl_mc_bus_dpdcei(const struct fsl_mc_device *mc_dev)
-+{
-+	return mc_dev->dev.type == &fsl_mc_bus_dpdcei_type;
-+}
-+
- /*
-  * Data Path Resource Container (DPRC) API
-  */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0145-bus-fsl-mc-add-support-for-dpaiop-dpci-and-dpdmai-de.patch b/target/linux/layerscape/patches-5.4/701-net-0145-bus-fsl-mc-add-support-for-dpaiop-dpci-and-dpdmai-de.patch
deleted file mode 100644
index c57d16e496..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0145-bus-fsl-mc-add-support-for-dpaiop-dpci-and-dpdmai-de.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 0b8b5f7ff79b83ccfcb82fe0f571ddd77f577d19 Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Thu, 3 May 2018 15:37:04 +0300
-Subject: [PATCH] bus: fsl-mc: add support for dpaiop, dpci and dpdmai device
- type
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
----
- drivers/bus/fsl-mc/fsl-mc-bus.c | 15 +++++++++++++++
- include/linux/fsl/mc.h          | 18 ++++++++++++++++++
- 2 files changed, 33 insertions(+)
-
---- a/drivers/bus/fsl-mc/fsl-mc-bus.c
-+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
-@@ -302,6 +302,18 @@ struct device_type fsl_mc_bus_dpdcei_typ
- 	.name = "fsl_mc_bus_dpdcei"
- };
- 
-+struct device_type fsl_mc_bus_dpaiop_type = {
-+	.name = "fsl_mc_bus_dpaiop"
-+};
-+
-+struct device_type fsl_mc_bus_dpci_type = {
-+	.name = "fsl_mc_bus_dpci"
-+};
-+
-+struct device_type fsl_mc_bus_dpdmai_type = {
-+	.name = "fsl_mc_bus_dpdmai"
-+};
-+
- static struct device_type *fsl_mc_get_device_type(const char *type)
- {
- 	static const struct {
-@@ -320,6 +332,9 @@ static struct device_type *fsl_mc_get_de
- 		{ &fsl_mc_bus_dprtc_type, "dprtc" },
- 		{ &fsl_mc_bus_dpseci_type, "dpseci" },
- 		{ &fsl_mc_bus_dpdcei_type, "dpdcei" },
-+		{ &fsl_mc_bus_dpaiop_type, "dpaiop" },
-+		{ &fsl_mc_bus_dpci_type, "dpci" },
-+		{ &fsl_mc_bus_dpdmai_type, "dpdmai" },
- 		{ NULL, NULL }
- 	};
- 	int i;
---- a/include/linux/fsl/mc.h
-+++ b/include/linux/fsl/mc.h
-@@ -424,6 +424,9 @@ extern struct device_type fsl_mc_bus_dpm
- extern struct device_type fsl_mc_bus_dprtc_type;
- extern struct device_type fsl_mc_bus_dpseci_type;
- extern struct device_type fsl_mc_bus_dpdcei_type;
-+extern struct device_type fsl_mc_bus_dpaiop_type;
-+extern struct device_type fsl_mc_bus_dpci_type;
-+extern struct device_type fsl_mc_bus_dpdmai_type;
- 
- static inline bool is_fsl_mc_bus_dprc(const struct fsl_mc_device *mc_dev)
- {
-@@ -485,6 +488,21 @@ static inline bool is_fsl_mc_bus_dpdcei(
- 	return mc_dev->dev.type == &fsl_mc_bus_dpdcei_type;
- }
- 
-+static inline bool is_fsl_mc_bus_dpaiop(const struct fsl_mc_device *mc_dev)
-+{
-+	return mc_dev->dev.type == &fsl_mc_bus_dpaiop_type;
-+}
-+
-+static inline bool is_fsl_mc_bus_dpci(const struct fsl_mc_device *mc_dev)
-+{
-+	return mc_dev->dev.type == &fsl_mc_bus_dpci_type;
-+}
-+
-+static inline bool is_fsl_mc_bus_dpdmai(const struct fsl_mc_device *mc_dev)
-+{
-+	return mc_dev->dev.type == &fsl_mc_bus_dpdmai_type;
-+}
-+
- /*
-  * Data Path Resource Container (DPRC) API
-  */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0146-bus-fsl-mc-DMA-configure-to-have-force-dma-as-defaul.patch b/target/linux/layerscape/patches-5.4/701-net-0146-bus-fsl-mc-DMA-configure-to-have-force-dma-as-defaul.patch
deleted file mode 100644
index c0a4d019a5..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0146-bus-fsl-mc-DMA-configure-to-have-force-dma-as-defaul.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From b6b91c9f49f8459eab973aa3b52b4e8a3a00daa1 Mon Sep 17 00:00:00 2001
-From: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Date: Mon, 27 Aug 2018 13:22:34 +0530
-Subject: [PATCH] bus: fsl-mc: DMA configure to have force-dma as default
-
-Implicit dma setting from bus works when dma-ranges
-specified but not otherwise. We need to continue
-to go for force_dma as default for cases dma-ranges not
-specified. Example dynamic device tree generation for
-generic kvm virtual machines.
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
----
- drivers/bus/fsl-mc/fsl-mc-bus.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/bus/fsl-mc/fsl-mc-bus.c
-+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
-@@ -140,7 +140,7 @@ static int fsl_mc_dma_configure(struct d
- 	while (dev_is_fsl_mc(dma_dev))
- 		dma_dev = dma_dev->parent;
- 
--	return of_dma_configure(dev, dma_dev->of_node, 0);
-+	return of_dma_configure(dev, dma_dev->of_node, 1);
- }
- 
- static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0147-bus-fsl-mc-Allocate-mc-portal-from-root-dprc-contain.patch b/target/linux/layerscape/patches-5.4/701-net-0147-bus-fsl-mc-Allocate-mc-portal-from-root-dprc-contain.patch
deleted file mode 100644
index 8fd2bb2738..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0147-bus-fsl-mc-Allocate-mc-portal-from-root-dprc-contain.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 703972946a42cf1f83bf50cf389d618d61b69500 Mon Sep 17 00:00:00 2001
-From: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Date: Mon, 10 Dec 2018 14:42:51 +0530
-Subject: [PATCH] bus: fsl-mc: Allocate mc-portal from root dprc container
-
-Root dprc container have allocate-able mc-portals which
-can be allocated by kernel drivers.
-
-As per current design mc-portal is allocated from parent
-dprc container if requesting device is not root-dprc.
-This works fine if the requesting device is child of
-root dprc container, because their parent is root-dprc
-container. But if request device is grandchild of root
-dprc container then it tries to allocate from it's parent
-root dprc-container and it fails.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
----
- drivers/bus/fsl-mc/mc-io.c | 10 ++++++----
- 1 file changed, 6 insertions(+), 4 deletions(-)
-
---- a/drivers/bus/fsl-mc/mc-io.c
-+++ b/drivers/bus/fsl-mc/mc-io.c
-@@ -174,14 +174,16 @@ int __must_check fsl_mc_portal_allocate(
- 	int error = -EINVAL;
- 	struct fsl_mc_resource *resource = NULL;
- 	struct fsl_mc_io *mc_io = NULL;
-+	struct device *root_dprc_dev;
- 
--	if (mc_dev->flags & FSL_MC_IS_DPRC) {
-+	if (fsl_mc_is_root_dprc(&mc_dev->dev)) {
- 		mc_bus_dev = mc_dev;
- 	} else {
--		if (!dev_is_fsl_mc(mc_dev->dev.parent))
--			return error;
-+		fsl_mc_get_root_dprc(&mc_dev->dev, &root_dprc_dev);
-+		if (WARN_ON(!root_dprc_dev))
-+			return -EINVAL;
- 
--		mc_bus_dev = to_fsl_mc_device(mc_dev->dev.parent);
-+		mc_bus_dev = to_fsl_mc_device(root_dprc_dev);
- 	}
- 
- 	mc_bus = to_fsl_mc_bus(mc_bus_dev);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0148-bus-fsl-mc-use-raw-spin-lock-to-serialize-mc-cmds.patch b/target/linux/layerscape/patches-5.4/701-net-0148-bus-fsl-mc-use-raw-spin-lock-to-serialize-mc-cmds.patch
deleted file mode 100644
index 42934e2245..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0148-bus-fsl-mc-use-raw-spin-lock-to-serialize-mc-cmds.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 035546179039d430b32b2cace256552455abf061 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Thu, 29 Aug 2019 11:39:45 +0300
-Subject: [PATCH] bus: fsl-mc: use raw spin lock to serialize mc cmds
-
-Replace the spinlock that serializes the MC commands with a raw
-spinlock. This is needed for the RT kernel because there are MC
-commands sent in interrupt context.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- drivers/bus/fsl-mc/mc-io.c  | 2 +-
- drivers/bus/fsl-mc/mc-sys.c | 4 ++--
- include/linux/fsl/mc.h      | 2 +-
- 3 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/bus/fsl-mc/mc-io.c
-+++ b/drivers/bus/fsl-mc/mc-io.c
-@@ -82,7 +82,7 @@ int __must_check fsl_create_mc_io(struct
- 	mc_io->portal_phys_addr = mc_portal_phys_addr;
- 	mc_io->portal_size = mc_portal_size;
- 	if (flags & FSL_MC_IO_ATOMIC_CONTEXT_PORTAL)
--		spin_lock_init(&mc_io->spinlock);
-+		raw_spin_lock_init(&mc_io->spinlock);
- 	else
- 		mutex_init(&mc_io->mutex);
- 
---- a/drivers/bus/fsl-mc/mc-sys.c
-+++ b/drivers/bus/fsl-mc/mc-sys.c
-@@ -251,7 +251,7 @@ int mc_send_command(struct fsl_mc_io *mc
- 		return -EINVAL;
- 
- 	if (mc_io->flags & FSL_MC_IO_ATOMIC_CONTEXT_PORTAL)
--		spin_lock_irqsave(&mc_io->spinlock, irq_flags);
-+		raw_spin_lock_irqsave(&mc_io->spinlock, irq_flags);
- 	else
- 		mutex_lock(&mc_io->mutex);
- 
-@@ -287,7 +287,7 @@ int mc_send_command(struct fsl_mc_io *mc
- 	error = 0;
- common_exit:
- 	if (mc_io->flags & FSL_MC_IO_ATOMIC_CONTEXT_PORTAL)
--		spin_unlock_irqrestore(&mc_io->spinlock, irq_flags);
-+		raw_spin_unlock_irqrestore(&mc_io->spinlock, irq_flags);
- 	else
- 		mutex_unlock(&mc_io->mutex);
- 
---- a/include/linux/fsl/mc.h
-+++ b/include/linux/fsl/mc.h
-@@ -340,7 +340,7 @@ struct fsl_mc_io {
- 		 * This field is only meaningful if the
- 		 * FSL_MC_IO_ATOMIC_CONTEXT_PORTAL flag is set
- 		 */
--		spinlock_t spinlock;	/* serializes mc_send_command() */
-+		raw_spinlock_t spinlock; /* serializes mc_send_command() */
- 	};
- };
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0149-soc-fsl-dpio-change-CENA-regs-to-be-cacheable.patch b/target/linux/layerscape/patches-5.4/701-net-0149-soc-fsl-dpio-change-CENA-regs-to-be-cacheable.patch
deleted file mode 100644
index eba8a12007..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0149-soc-fsl-dpio-change-CENA-regs-to-be-cacheable.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From e2b0ebb44e91e3492f26d21218fb7ea5e14190ec Mon Sep 17 00:00:00 2001
-From: Haiying Wang <Haiying.Wang@nxp.com>
-Date: Thu, 20 Apr 2017 11:54:22 -0400
-Subject: [PATCH] soc: fsl: dpio: change CENA regs to be cacheable
-
-Change cache enabled regsiter accessed to be cacheable
-plus non-shareable to meet the performance requirement.
-QMan's CENA region contains registers and structures that
-are 64byte in size and are inteneded to be accessed using a
-single 64 byte bus transaction, therefore this portal
-memory should be configured as cache-enabled. Also because
-the write allocate stash transcations of QBMan should be
-issued as cachable and non-coherent(non-sharable), we
-need to configure this region to be non-shareable.
-
-Signed-off-by: Haiying Wang <Haiying.Wang@nxp.com>
----
- drivers/soc/fsl/dpio/dpio-driver.c | 17 ++++++++++-------
- 1 file changed, 10 insertions(+), 7 deletions(-)
-
---- a/drivers/soc/fsl/dpio/dpio-driver.c
-+++ b/drivers/soc/fsl/dpio/dpio-driver.c
-@@ -27,6 +27,11 @@ MODULE_LICENSE("Dual BSD/GPL");
- MODULE_AUTHOR("Freescale Semiconductor, Inc");
- MODULE_DESCRIPTION("DPIO Driver");
- 
-+#define PROT_NORMAL_NS		(PTE_TYPE_PAGE | PTE_AF | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL))
-+
-+#define ioremap_cache_ns(addr, size)	__ioremap((addr), (size), __pgprot(PROT_NORMAL_NS))
-+
-+
- struct dpio_priv {
- 	struct dpaa2_io *io;
- };
-@@ -197,13 +202,11 @@ static int dpaa2_dpio_probe(struct fsl_m
- 	if (dpio_dev->obj_desc.region_count < 3) {
- 		/* No support for DDR backed portals, use classic mapping */
- 		/*
--		 * Set the CENA regs to be the cache inhibited area of the
--		 * portal to avoid coherency issues if a user migrates to
--		 * another core.
-+		 * Set the CENA regs to be the cache enabled area of the portal to
-+		 * achieve the best performance.
- 		 */
--		desc.regs_cena = devm_memremap(dev, dpio_dev->regions[1].start,
--					resource_size(&dpio_dev->regions[1]),
--					MEMREMAP_WC);
-+		desc.regs_cena = ioremap_cache_ns(dpio_dev->regions[0].start,
-+						resource_size(&dpio_dev->regions[0]));
- 	} else {
- 		desc.regs_cena = devm_memremap(dev, dpio_dev->regions[2].start,
- 					resource_size(&dpio_dev->regions[2]),
-@@ -211,7 +214,7 @@ static int dpaa2_dpio_probe(struct fsl_m
- 	}
- 
- 	if (IS_ERR(desc.regs_cena)) {
--		dev_err(dev, "devm_memremap failed\n");
-+		dev_err(dev, "ioremap_cache_ns failed\n");
- 		err = PTR_ERR(desc.regs_cena);
- 		goto err_allocate_irqs;
- 	}
diff --git a/target/linux/layerscape/patches-5.4/701-net-0150-soc-fsl-dpio-enable-qbman-CENA-portal-memory-access.patch b/target/linux/layerscape/patches-5.4/701-net-0150-soc-fsl-dpio-enable-qbman-CENA-portal-memory-access.patch
deleted file mode 100644
index d246046c79..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0150-soc-fsl-dpio-enable-qbman-CENA-portal-memory-access.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From 8464c7b6e7c491ae06b18103881611c98678cf1f Mon Sep 17 00:00:00 2001
-From: Haiying Wang <Haiying.Wang@nxp.com>
-Date: Thu, 13 Apr 2017 14:54:01 -0400
-Subject: [PATCH] soc: fsl: dpio: enable qbman CENA portal memory access
-
-Once we enable the cacheable portal memory, we need to do
-cache flush for enqueue, vdq, buffer release, and management
-commands, as well as invalidate and prefetch for the valid bit
-of management command response and next index of dqrr.
-
-Signed-off-by: Haiying Wang <Haiying.Wang@nxp.com>
----
- drivers/soc/fsl/dpio/qbman-portal.c | 23 +++++++++++++++++------
- 1 file changed, 17 insertions(+), 6 deletions(-)
-
---- a/drivers/soc/fsl/dpio/qbman-portal.c
-+++ b/drivers/soc/fsl/dpio/qbman-portal.c
-@@ -90,6 +90,14 @@ enum qbman_sdqcr_fc {
- 	qbman_sdqcr_fc_up_to_3 = 1
- };
- 
-+#define dccvac(p) { asm volatile("dc cvac, %0;" : : "r" (p) : "memory"); }
-+#define dcivac(p) { asm volatile("dc ivac, %0" : : "r"(p) : "memory"); }
-+static inline void qbman_inval_prefetch(struct qbman_swp *p, uint32_t offset)
-+{
-+	dcivac(p->addr_cena + offset);
-+	prefetch(p->addr_cena + offset);
-+}
-+
- /* Portal Access */
- 
- static inline u32 qbman_read_register(struct qbman_swp *p, u32 offset)
-@@ -190,7 +198,7 @@ struct qbman_swp *qbman_swp_init(const s
- 		memset(p->addr_cena, 0, 64 * 1024);
- 
- 	reg = qbman_set_swp_cfg(p->dqrr.dqrr_size,
--				1, /* Writes Non-cacheable */
-+				0, /* Writes cacheable */
- 				0, /* EQCR_CI stashing threshold */
- 				3, /* RPM: Valid bit mode, RCR in array mode */
- 				2, /* DCM: Discrete consumption ack mode */
-@@ -329,6 +337,7 @@ void qbman_swp_mc_submit(struct qbman_sw
- 	if ((p->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) {
- 		dma_wmb();
- 		*v = cmd_verb | p->mc.valid_bit;
-+		dccvac(cmd);
- 	} else {
- 		*v = cmd_verb | p->mc.valid_bit;
- 		dma_wmb();
-@@ -345,6 +354,7 @@ void *qbman_swp_mc_result(struct qbman_s
- 	u32 *ret, verb;
- 
- 	if ((p->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) {
-+		qbman_inval_prefetch(p, QBMAN_CENA_SWP_RR(p->mc.valid_bit));
- 		ret = qbman_get_cmd(p, QBMAN_CENA_SWP_RR(p->mc.valid_bit));
- 		/* Remove the valid-bit - command completed if the rest
- 		 * is non-zero.
-@@ -481,6 +491,7 @@ int qbman_swp_enqueue(struct qbman_swp *
- 		/* Set the verb byte, have to substitute in the valid-bit */
- 		dma_wmb();
- 		p->verb = d->verb | EQAR_VB(eqar);
-+		dccvac(p);
- 	} else {
- 		p->verb = d->verb | EQAR_VB(eqar);
- 		dma_wmb();
-@@ -677,6 +688,7 @@ int qbman_swp_pull(struct qbman_swp *s,
- 		/* Set the verb byte, have to substitute in the valid-bit */
- 		p->verb = d->verb | s->vdq.valid_bit;
- 		s->vdq.valid_bit ^= QB_VALID_BIT;
-+		dccvac(p);
- 	} else {
- 		p->verb = d->verb | s->vdq.valid_bit;
- 		s->vdq.valid_bit ^= QB_VALID_BIT;
-@@ -736,8 +748,7 @@ const struct dpaa2_dq *qbman_swp_dqrr_ne
- 				 s->dqrr.next_idx, pi);
- 			s->dqrr.reset_bug = 0;
- 		}
--		prefetch(qbman_get_cmd(s,
--				       QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)));
-+		qbman_inval_prefetch(s,	QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
- 	}
- 
- 	if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000)
-@@ -755,8 +766,7 @@ const struct dpaa2_dq *qbman_swp_dqrr_ne
- 	 * knew from reading PI.
- 	 */
- 	if ((verb & QB_VALID_BIT) != s->dqrr.valid_bit) {
--		prefetch(qbman_get_cmd(s,
--				       QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)));
-+		qbman_inval_prefetch(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
- 		return NULL;
- 	}
- 	/*
-@@ -779,7 +789,7 @@ const struct dpaa2_dq *qbman_swp_dqrr_ne
- 	    (flags & DPAA2_DQ_STAT_EXPIRED))
- 		atomic_inc(&s->vdq.available);
- 
--	prefetch(qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)));
-+	qbman_inval_prefetch(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
- 
- 	return p;
- }
-@@ -911,6 +921,7 @@ int qbman_swp_release(struct qbman_swp *
- 		 */
- 		dma_wmb();
- 		p->verb = d->verb | RAR_VB(rar) | num_buffers;
-+		dccvac(p);
- 	} else {
- 		p->verb = d->verb | RAR_VB(rar) | num_buffers;
- 		dma_wmb();
diff --git a/target/linux/layerscape/patches-5.4/701-net-0151-soc-fsl-dpio-Prefer-the-CPU-affine-DPIO.patch b/target/linux/layerscape/patches-5.4/701-net-0151-soc-fsl-dpio-Prefer-the-CPU-affine-DPIO.patch
deleted file mode 100644
index e9fdc7d0da..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0151-soc-fsl-dpio-Prefer-the-CPU-affine-DPIO.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 33b7977ba754b6ec4e65aaae34de92d4086ea0bd Mon Sep 17 00:00:00 2001
-From: Roy Pledge <roy.pledge@nxp.com>
-Date: Wed, 13 Sep 2017 17:03:06 -0400
-Subject: [PATCH] soc: fsl: dpio: Prefer the CPU affine DPIO
-
-Use the cpu affine DPIO unless there isn't one which can happen
-if less DPIOs than cores are assign to the kernel.
-
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
----
- drivers/soc/fsl/dpio/dpio-service.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/soc/fsl/dpio/dpio-service.c
-+++ b/drivers/soc/fsl/dpio/dpio-service.c
-@@ -58,7 +58,7 @@ static inline struct dpaa2_io *service_s
- 	 * If cpu == -1, choose the current cpu, with no guarantees about
- 	 * potentially being migrated away.
- 	 */
--	if (unlikely(cpu < 0))
-+	if (cpu < 0)
- 		cpu = smp_processor_id();
- 
- 	/* If a specific cpu was requested, pick it up immediately */
-@@ -70,6 +70,10 @@ static inline struct dpaa2_io *service_s
- 	if (d)
- 		return d;
- 
-+	d = service_select_by_cpu(d, -1);
-+	if (d)
-+		return d;
-+
- 	spin_lock(&dpio_list_lock);
- 	d = list_entry(dpio_list.next, struct dpaa2_io, node);
- 	list_del(&d->node);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0152-soc-fsl-dpio-Add-Support-for-Order-Restoration.patch b/target/linux/layerscape/patches-5.4/701-net-0152-soc-fsl-dpio-Add-Support-for-Order-Restoration.patch
deleted file mode 100644
index a03f3e23a6..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0152-soc-fsl-dpio-Add-Support-for-Order-Restoration.patch
+++ /dev/null
@@ -1,214 +0,0 @@
-From c91f8c8c94c5e8a25d0d46d6cb26c0c48ba04f8f Mon Sep 17 00:00:00 2001
-From: Roy Pledge <roy.pledge@nxp.com>
-Date: Wed, 4 Oct 2017 15:36:06 -0400
-Subject: [PATCH] soc: fsl: dpio: Add Support for Order Restoration
-
-Add DPIO support for HW assisted order restoration
-
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
----
- drivers/soc/fsl/dpio/dpio-service.c | 105 ++++++++++++++++++++++++++++++++++++
- drivers/soc/fsl/dpio/qbman-portal.c |  37 +++++++++++++
- drivers/soc/fsl/dpio/qbman-portal.h |   3 ++
- include/soc/fsl/dpaa2-io.h          |  14 ++++-
- 4 files changed, 158 insertions(+), 1 deletion(-)
-
---- a/drivers/soc/fsl/dpio/dpio-service.c
-+++ b/drivers/soc/fsl/dpio/dpio-service.c
-@@ -707,3 +707,108 @@ int dpaa2_io_query_bp_count(struct dpaa2
- 	return 0;
- }
- EXPORT_SYMBOL_GPL(dpaa2_io_query_bp_count);
-+
-+/**
-+ * dpaa2_io_service_enqueue_orp_fq() - Enqueue a frame to a frame queue with
-+ * order restoration
-+ * @d: the given DPIO service.
-+ * @fqid: the given frame queue id.
-+ * @fd: the frame descriptor which is enqueued.
-+ * @orpid: the order restoration point ID
-+ * @seqnum: the order sequence number
-+ * @last: must be set for the final frame if seqnum is shared (spilt frame)
-+ *
-+ * Performs an enqueue to a frame queue using the specified order restoration
-+ * point. The QMan device will ensure the order of frames placed on the
-+ * queue will be ordered as per the sequence number.
-+ *
-+ * In the case a frame is split it is possible to enqueue using the same
-+ * sequence number more than once. The final frame in a shared sequence number
-+ * most be indicated by setting last = 1. For non shared sequence numbers
-+ * last = 1 must always be set.
-+ *
-+ * Return 0 for successful enqueue, or -EBUSY if the enqueue ring is not ready,
-+ * or -ENODEV if there is no dpio service.
-+ */
-+int dpaa2_io_service_enqueue_orp_fq(struct dpaa2_io *d, u32 fqid,
-+				    const struct dpaa2_fd *fd, u16 orpid,
-+				    u16 seqnum, int last)
-+{
-+	struct qbman_eq_desc ed;
-+
-+	d = service_select(d);
-+	if (!d)
-+		return -ENODEV;
-+	qbman_eq_desc_clear(&ed);
-+	qbman_eq_desc_set_orp(&ed, 0, orpid, seqnum, !last);
-+	qbman_eq_desc_set_fq(&ed, fqid);
-+	return qbman_swp_enqueue(d->swp, &ed, fd);
-+}
-+EXPORT_SYMBOL(dpaa2_io_service_enqueue_orp_fq);
-+
-+/**
-+ * dpaa2_io_service_enqueue_orp_qd() - Enqueue a frame to a queueing destination
-+ * with order restoration
-+ * @d: the given DPIO service.
-+ * @qdid: the given queuing destination id.
-+ * @fd: the frame descriptor which is enqueued.
-+ * @orpid: the order restoration point ID
-+ * @seqnum: the order sequence number
-+ * @last: must be set for the final frame if seqnum is shared (spilt frame)
-+ *
-+ * Performs an enqueue to a frame queue using the specified order restoration
-+ * point. The QMan device will ensure the order of frames placed on the
-+ * queue will be ordered as per the sequence number.
-+ *
-+ * In the case a frame is split it is possible to enqueue using the same
-+ * sequence number more than once. The final frame in a shared sequence number
-+ * most be indicated by setting last = 1. For non shared sequence numbers
-+ * last = 1 must always be set.
-+ *
-+ * Return 0 for successful enqueue, or -EBUSY if the enqueue ring is not ready,
-+ * or -ENODEV if there is no dpio service.
-+ */
-+int dpaa2_io_service_enqueue_orp_qd(struct dpaa2_io *d, u32 qdid, u8 prio,
-+				    u16 qdbin, const struct dpaa2_fd *fd,
-+				    u16 orpid, u16 seqnum, int last)
-+{
-+	struct qbman_eq_desc ed;
-+
-+	d = service_select(d);
-+	if (!d)
-+		return -ENODEV;
-+	qbman_eq_desc_clear(&ed);
-+	qbman_eq_desc_set_orp(&ed, 0, orpid, seqnum, !last);
-+	qbman_eq_desc_set_qd(&ed, qdid, qdbin, prio);
-+	return qbman_swp_enqueue(d->swp, &ed, fd);
-+}
-+EXPORT_SYMBOL_GPL(dpaa2_io_service_enqueue_orp_qd);
-+
-+/**
-+ * dpaa2_io_service_orp_seqnum_drop() - Remove a sequence number from
-+ * an order restoration list
-+ * @d: the given DPIO service.
-+ * @orpid: Order restoration point to remove a sequence number from
-+ * @seqnum: Sequence number to remove
-+ *
-+ * Removes a frames sequence number from an order restoration point without
-+ * enqueing the frame. Used to indicate that the order restoration hardware
-+ * should not expect to see this sequence number. Typically used to indicate
-+ * a frame was terminated or dropped from a flow.
-+ *
-+ * Return 0 for successful enqueue, or -EBUSY if the enqueue ring is not ready,
-+ * or -ENODEV if there is no dpio service.
-+ */
-+int dpaa2_io_service_orp_seqnum_drop(struct dpaa2_io *d, u16 orpid, u16 seqnum)
-+{
-+	struct qbman_eq_desc ed;
-+	struct dpaa2_fd fd;
-+
-+	d = service_select(d);
-+	if (!d)
-+		return -ENODEV;
-+	qbman_eq_desc_clear(&ed);
-+	qbman_eq_desc_set_orp_hole(&ed, orpid, seqnum);
-+	return qbman_swp_enqueue(d->swp, &ed, &fd);
-+}
-+EXPORT_SYMBOL_GPL(dpaa2_io_service_orp_seqnum_drop);
---- a/drivers/soc/fsl/dpio/qbman-portal.c
-+++ b/drivers/soc/fsl/dpio/qbman-portal.c
-@@ -413,6 +413,43 @@ void qbman_eq_desc_set_no_orp(struct qbm
- 		d->verb |= enqueue_rejects_to_fq;
- }
- 
-+/**
-+ * qbman_eq_desc_set_orp() - Set order-restoration in the enqueue descriptor
-+ * @d: the enqueue descriptor.
-+ * @response_success: 1 = enqueue with response always; 0 = enqueue with
-+ * rejections returned on a FQ.
-+ * @oprid: the order point record id.
-+ * @seqnum: the order restoration sequence number.
-+ * @incomplete: indicates whether this is the last fragments using the same
-+ * sequence number.
-+ */
-+void qbman_eq_desc_set_orp(struct qbman_eq_desc *d, int respond_success,
-+			   u16 oprid, u16 seqnum, int incomplete)
-+{
-+	d->verb |= (1 << QB_ENQUEUE_CMD_ORP_ENABLE_SHIFT);
-+	if (respond_success)
-+		d->verb |= enqueue_response_always;
-+	else
-+		d->verb |= enqueue_rejects_to_fq;
-+	d->orpid = cpu_to_le16(oprid);
-+	d->seqnum = cpu_to_le16((!!incomplete << 14) | seqnum);
-+}
-+
-+/**
-+ * qbman_eq_desc_set_orp_hole() - fill a hole in the order-restoration sequence
-+ * without any enqueue
-+ * @d: the enqueue descriptor.
-+ * @oprid: the order point record id.
-+ * @seqnum: the order restoration sequence number.
-+ */
-+void qbman_eq_desc_set_orp_hole(struct qbman_eq_desc *d, u16 oprid,
-+				u16 seqnum)
-+{
-+	d->verb |= (1 << QB_ENQUEUE_CMD_ORP_ENABLE_SHIFT) | enqueue_empty;
-+	d->orpid = cpu_to_le16(oprid);
-+	d->seqnum = cpu_to_le16(seqnum);
-+}
-+
- /*
-  * Exactly one of the following descriptor "targets" should be set. (Calling any
-  * one of these will replace the effect of any prior call to one of these.)
---- a/drivers/soc/fsl/dpio/qbman-portal.h
-+++ b/drivers/soc/fsl/dpio/qbman-portal.h
-@@ -167,6 +167,9 @@ int qbman_result_has_new_result(struct q
- 
- void qbman_eq_desc_clear(struct qbman_eq_desc *d);
- void qbman_eq_desc_set_no_orp(struct qbman_eq_desc *d, int respond_success);
-+void qbman_eq_desc_set_orp(struct qbman_eq_desc *d, int respond_success,
-+			   u16 oprid, u16 seqnum, int incomplete);
-+void qbman_eq_desc_set_orp_hole(struct qbman_eq_desc *d, u16 oprid, u16 seqnum);
- void qbman_eq_desc_set_token(struct qbman_eq_desc *d, u8 token);
- void qbman_eq_desc_set_fq(struct qbman_eq_desc *d, u32 fqid);
- void qbman_eq_desc_set_qd(struct qbman_eq_desc *d, u32 qdid,
---- a/include/soc/fsl/dpaa2-io.h
-+++ b/include/soc/fsl/dpaa2-io.h
-@@ -1,7 +1,7 @@
- /* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
- /*
-  * Copyright 2014-2016 Freescale Semiconductor Inc.
-- * Copyright NXP
-+ * Copyright 2017 NXP
-  *
-  */
- #ifndef __FSL_DPAA2_IO_H
-@@ -121,6 +121,18 @@ struct dpaa2_io_store *dpaa2_io_store_cr
- void dpaa2_io_store_destroy(struct dpaa2_io_store *s);
- struct dpaa2_dq *dpaa2_io_store_next(struct dpaa2_io_store *s, int *is_last);
- 
-+/* Order Restoration Support */
-+int dpaa2_io_service_enqueue_orp_fq(struct dpaa2_io *d, u32 fqid,
-+				    const struct dpaa2_fd *fd, u16 orpid,
-+				    u16 seqnum, int last);
-+
-+int dpaa2_io_service_enqueue_orp_qd(struct dpaa2_io *d, u32 qdid, u8 prio,
-+				    u16 qdbin, const struct dpaa2_fd *fd,
-+				    u16 orpid, u16 seqnum, int last);
-+
-+int dpaa2_io_service_orp_seqnum_drop(struct dpaa2_io *d, u16 orpid,
-+				     u16 seqnum);
-+
- int dpaa2_io_query_fq_count(struct dpaa2_io *d, u32 fqid,
- 			    u32 *fcnt, u32 *bcnt);
- int dpaa2_io_query_bp_count(struct dpaa2_io *d, u16 bpid,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0153-soc-fsl-dpio-Fix-order-restoration-API-for-QBMan-5.0.patch b/target/linux/layerscape/patches-5.4/701-net-0153-soc-fsl-dpio-Fix-order-restoration-API-for-QBMan-5.0.patch
deleted file mode 100644
index 6ca8b59518..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0153-soc-fsl-dpio-Fix-order-restoration-API-for-QBMan-5.0.patch
+++ /dev/null
@@ -1,144 +0,0 @@
-From 72a6312eda9b142ac5910e5f4b652fa8ae8d222d Mon Sep 17 00:00:00 2001
-From: Roy Pledge <roy.pledge@nxp.com>
-Date: Thu, 25 Oct 2018 16:55:53 -0400
-Subject: [PATCH] soc: fsl: dpio: Fix order restoration API for QBMan 5.0
-
-The mechanism for indicating to HW that a frame was dropped
-when performing HW order restoration changed in QBMan 5.0 to
-use a management command instead of a special enqueue command.
-This patch implements that change when running on a QBMan 5.0
-and above device.
-
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
----
- drivers/soc/fsl/dpio/dpio-service.c | 10 +++++++
- drivers/soc/fsl/dpio/qbman-portal.c | 59 ++++++++++++++++++++++++++++++++-----
- drivers/soc/fsl/dpio/qbman-portal.h |  9 ++++++
- 3 files changed, 71 insertions(+), 7 deletions(-)
-
---- a/drivers/soc/fsl/dpio/dpio-service.c
-+++ b/drivers/soc/fsl/dpio/dpio-service.c
-@@ -803,10 +803,20 @@ int dpaa2_io_service_orp_seqnum_drop(str
- {
- 	struct qbman_eq_desc ed;
- 	struct dpaa2_fd fd;
-+	unsigned long irqflags;
-+	int ret;
- 
- 	d = service_select(d);
- 	if (!d)
- 		return -ENODEV;
-+
-+	if ((d->swp->desc->qman_version & QMAN_REV_MASK) >= QMAN_REV_5000) {
-+		spin_lock_irqsave(&d->lock_mgmt_cmd, irqflags);
-+		ret = qbman_orp_drop(d->swp, orpid, seqnum);
-+		spin_unlock_irqrestore(&d->lock_mgmt_cmd, irqflags);
-+		return ret;
-+	}
-+
- 	qbman_eq_desc_clear(&ed);
- 	qbman_eq_desc_set_orp_hole(&ed, orpid, seqnum);
- 	return qbman_swp_enqueue(d->swp, &ed, &fd);
---- a/drivers/soc/fsl/dpio/qbman-portal.c
-+++ b/drivers/soc/fsl/dpio/qbman-portal.c
-@@ -12,19 +12,13 @@
- 
- #include "qbman-portal.h"
- 
--#define QMAN_REV_4000   0x04000000
--#define QMAN_REV_4100   0x04010000
--#define QMAN_REV_4101   0x04010001
--#define QMAN_REV_5000   0x05000000
--
--#define QMAN_REV_MASK   0xffff0000
--
- /* All QBMan command and result structures use this "valid bit" encoding */
- #define QB_VALID_BIT ((u32)0x80)
- 
- /* QBMan portal management command codes */
- #define QBMAN_MC_ACQUIRE       0x30
- #define QBMAN_WQCHAN_CONFIGURE 0x46
-+#define QBMAN_MC_ORP           0x63
- 
- /* CINH register offsets */
- #define QBMAN_CINH_SWP_EQCR_PI      0x800
-@@ -1246,3 +1240,54 @@ u32 qbman_bp_info_num_free_bufs(struct q
- {
- 	return le32_to_cpu(a->fill);
- }
-+
-+struct qbman_orp_cmd_desc {
-+	u8 verb;
-+	u8 reserved;
-+	u8 cid;
-+	u8 reserved2;
-+	u16 orpid;
-+	u16 seqnum;
-+	u8 reserved3[56];
-+};
-+
-+struct qbman_orp_cmd_rslt {
-+	u8 verb;
-+	u8 rslt;
-+	u8 cid;
-+	u8 reserved1[61];
-+};
-+
-+int qbman_orp_drop(struct qbman_swp *s, u16 orpid, u16 seqnum)
-+{
-+	struct qbman_orp_cmd_desc *p;
-+	struct qbman_orp_cmd_rslt *r;
-+	void *resp;
-+
-+	p = (struct qbman_orp_cmd_desc *)qbman_swp_mc_start(s);
-+	if (!p)
-+		return -EBUSY;
-+
-+	p->cid = 0x7;
-+	p->orpid = cpu_to_le16(orpid);
-+	p->seqnum = cpu_to_le16(seqnum);
-+
-+	resp = qbman_swp_mc_complete(s, p, QBMAN_MC_ORP);
-+	if (!resp) {
-+		pr_err("qbman: Drop sequence num %d orpid 0x%x failed, no response\n",
-+		       seqnum, orpid);
-+		return -EIO;
-+	}
-+	r = (struct qbman_orp_cmd_rslt *)resp;
-+	/* Decode the outcome */
-+	WARN_ON((r->verb & QBMAN_RESPONSE_VERB_MASK) != QBMAN_MC_ORP);
-+
-+	/* Determine success or failure */
-+	if (r->rslt != QBMAN_MC_RSLT_OK) {
-+		pr_err("Drop seqnum %d of prpid 0x%x failed, code=0x%02x\n",
-+		       seqnum, orpid, r->rslt);
-+		return -EIO;
-+	}
-+
-+	return 0;
-+}
---- a/drivers/soc/fsl/dpio/qbman-portal.h
-+++ b/drivers/soc/fsl/dpio/qbman-portal.h
-@@ -9,6 +9,13 @@
- 
- #include <soc/fsl/dpaa2-fd.h>
- 
-+#define QMAN_REV_4000   0x04000000
-+#define QMAN_REV_4100   0x04010000
-+#define QMAN_REV_4101   0x04010001
-+#define QMAN_REV_5000   0x05000000
-+
-+#define QMAN_REV_MASK   0xffff0000
-+
- struct dpaa2_dq;
- struct qbman_swp;
- 
-@@ -178,6 +185,8 @@ void qbman_eq_desc_set_qd(struct qbman_e
- int qbman_swp_enqueue(struct qbman_swp *p, const struct qbman_eq_desc *d,
- 		      const struct dpaa2_fd *fd);
- 
-+int qbman_orp_drop(struct qbman_swp *s, u16 orpid, u16 seqnum);
-+
- void qbman_release_desc_clear(struct qbman_release_desc *d);
- void qbman_release_desc_set_bpid(struct qbman_release_desc *d, u16 bpid);
- void qbman_release_desc_set_rcdi(struct qbman_release_desc *d, int enable);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0154-soc-fsl-dpio-add-support-for-opr.patch b/target/linux/layerscape/patches-5.4/701-net-0154-soc-fsl-dpio-add-support-for-opr.patch
deleted file mode 100644
index 8bd1e547d7..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0154-soc-fsl-dpio-add-support-for-opr.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From a0fd93952b6f0b408d96b29a0b9beb8bb2d8a24d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Horia=20Geant=C4=83?= <horia.geanta@nxp.com>
-Date: Wed, 10 Oct 2018 15:59:55 +0300
-Subject: [PATCH] soc: fsl: dpio: add support for opr
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Order preservation is a feature that will be supported
-in dpni, dpseci and dpci devices.
-This is a preliminary patch for the changes to be
-introduced in the corresponding drivers.
-
-Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- include/soc/fsl/dpaa2-global.h | 74 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 74 insertions(+)
-
---- a/include/soc/fsl/dpaa2-global.h
-+++ b/include/soc/fsl/dpaa2-global.h
-@@ -189,4 +189,78 @@ static inline bool dpaa2_cscn_state_cong
- 	return !!(cscn->scn.state & DPAA2_CSCN_STATE_CG);
- }
- 
-+/* Data Path Order Restoration API
-+ * Contains initialization APIs and runtime APIs for the Order Restoration
-+ */
-+
-+/** Order Restoration properties */
-+
-+/**
-+ * Create a new Order Point Record option
-+ */
-+#define OPR_OPT_CREATE 0x1
-+/**
-+ * Retire an existing Order Point Record option
-+ */
-+#define OPR_OPT_RETIRE 0x2
-+
-+/**
-+ * struct opr_cfg - Structure representing OPR configuration
-+ * @oprrws: Order point record (OPR) restoration window size (0 to 5)
-+ *			0 - Window size is 32 frames.
-+ *			1 - Window size is 64 frames.
-+ *			2 - Window size is 128 frames.
-+ *			3 - Window size is 256 frames.
-+ *			4 - Window size is 512 frames.
-+ *			5 - Window size is 1024 frames.
-+ * @oa: OPR auto advance NESN window size (0 disabled, 1 enabled)
-+ * @olws: OPR acceptable late arrival window size (0 to 3)
-+ *			0 - Disabled. Late arrivals are always rejected.
-+ *			1 - Window size is 32 frames.
-+ *			2 - Window size is the same as the OPR restoration
-+ *				window size configured in the OPRRWS field.
-+ *			3 - Window size is 8192 frames. Late arrivals are
-+ *				always accepted.
-+ * @oeane: Order restoration list (ORL) resource exhaustion
-+ *			advance NESN enable (0 disabled, 1 enabled)
-+ * @oloe: OPR loose ordering enable (0 disabled, 1 enabled)
-+ */
-+struct opr_cfg {
-+	u8 oprrws;
-+	u8 oa;
-+	u8 olws;
-+	u8 oeane;
-+	u8 oloe;
-+};
-+
-+/**
-+ * struct opr_qry - Structure representing OPR configuration
-+ * @enable: Enabled state
-+ * @rip: Retirement In Progress
-+ * @ndsn: Next dispensed sequence number
-+ * @nesn: Next expected sequence number
-+ * @ea_hseq: Early arrival head sequence number
-+ * @hseq_nlis: HSEQ not last in sequence
-+ * @ea_tseq: Early arrival tail sequence number
-+ * @tseq_nlis: TSEQ not last in sequence
-+ * @ea_tptr: Early arrival tail pointer
-+ * @ea_hptr: Early arrival head pointer
-+ * @opr_id: Order Point Record ID
-+ * @opr_vid: Order Point Record Virtual ID
-+ */
-+struct opr_qry {
-+	char enable;
-+	char rip;
-+	u16 ndsn;
-+	u16 nesn;
-+	u16 ea_hseq;
-+	char hseq_nlis;
-+	u16 ea_tseq;
-+	char tseq_nlis;
-+	u16 ea_tptr;
-+	u16 ea_hptr;
-+	u16 opr_id;
-+	u16 opr_vid;
-+};
-+
- #endif /* __FSL_DPAA2_GLOBAL_H */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0155-soc-fsl-dpio-aligned-access-of-qbman-cacheable-regio.patch b/target/linux/layerscape/patches-5.4/701-net-0155-soc-fsl-dpio-aligned-access-of-qbman-cacheable-regio.patch
deleted file mode 100644
index 92e4dca643..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0155-soc-fsl-dpio-aligned-access-of-qbman-cacheable-regio.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 353725d455cc27aa2008456c2711e7fae2b8a631 Mon Sep 17 00:00:00 2001
-From: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Date: Wed, 7 Mar 2018 21:35:37 +0530
-Subject: [PATCH] soc: fsl: dpio: aligned access of qbman cacheable region
-
-Alignment requirement on ARM is lenient (In Linux) for regions
-mapped as "Memory Type" but have very strict policy for regions
-mapped as "Device Type". Unaligned access to regions mapped
-as "Device Type" will always result to unaligned fault.
-
-DPIO driver have un-aligned access to QBman cacheable region
-and the Linux driver maps the region as "Memory Type". On Host
-Linux this works because MMU Stage-1 configured by driver allows
-unaligned access. In Virtual Machine cases, final region mapping type
-is governed by combination of Stage-1 and Stage-2 MMU mapping.
-
-Linux driver in VM controls maps the region as "Memory Type" in
-Stage-1 MMU while Stage-2 is controlled by KVM. And current KVM
-implementation does not allow device region to be mapped as
-"Memory Type". Till we have a working/upstream-able solution
-for Virtual Machine, we need to change un-aligned access in DPIO
-driver to be aligned
-
-While we reached to this point as we observed below alignment
-exception in Virtual Machine when accessing qbman cacheable region.
-
-  kvm [2347]: Unsupported FSC: EC=0x24 xFSC=0x21
-  ESR_EL2=0x92000061
-  error: kvm run failed Bad address
-  PC=ffff000008398e78  SP=ffff800009bcb540
-  X00=ffff000008041000 X01=ffff800009bcb580 X02=ffff800009bcb650
-  X03=0000000000000180
-  X04=ffff000008041001 X05=ffff800009bcb581 X06=0200000000000000
-  X07=0000000000000000
-  X08=0000000000000000 X09=ffff000008041000 X10=0000000000000001
-  X11=0000000000de6cb0
-  X12=00000000fa83b2da X13=0000000000000001 X14=000000007f605ec8
-  X15=00000000e26f5d5e
-  X16=000000008521af1e X17=000000001076277e X18=ffff800009bcb5c0
-  X19=ffff800079da2b00
-  X20=ffff800009bcb650 X21=0000000000000002 X22=0000000000000000
-  X23=0000000000000000
-  X24=0000000000000000 X25=ffff8000099e7440 X26=ffff000008da6000
-  X27=ffff000008e7f000
-  X28=00000000499e7440 X29=ffff800009bcb540 X30=ffff00000839a160
-  PSTATE=20000145 --C- EL1h
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
----
- drivers/soc/fsl/dpio/qbman-portal.c | 12 +++++++++++-
- 1 file changed, 11 insertions(+), 1 deletion(-)
-
---- a/drivers/soc/fsl/dpio/qbman-portal.c
-+++ b/drivers/soc/fsl/dpio/qbman-portal.c
-@@ -515,7 +515,17 @@ int qbman_swp_enqueue(struct qbman_swp *
- 		return -EBUSY;
- 
- 	p = qbman_get_cmd(s, QBMAN_CENA_SWP_EQCR(EQAR_IDX(eqar)));
--	memcpy(&p->dca, &d->dca, 31);
-+	/* This is mapped as DEVICE type memory, writes are
-+	 * with address alignment:
-+	 * desc.dca address alignment = 1
-+	 * desc.seqnum address alignment = 2
-+	 * desc.orpid address alignment = 4
-+	 * desc.tgtid address alignment = 8
-+	 */
-+	p->dca = d->dca;
-+	p->seqnum = d->seqnum;
-+	p->orpid = d->orpid;
-+	memcpy(&p->tgtid, &d->tgtid, 24);
- 	memcpy(&p->fd, fd, sizeof(*fd));
- 
- 	if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0156-staging-fsl-dpaa2-mac-Add-APIs-for-DPMAC-objects.patch b/target/linux/layerscape/patches-5.4/701-net-0156-staging-fsl-dpaa2-mac-Add-APIs-for-DPMAC-objects.patch
deleted file mode 100644
index 110d5dab90..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0156-staging-fsl-dpaa2-mac-Add-APIs-for-DPMAC-objects.patch
+++ /dev/null
@@ -1,1162 +0,0 @@
-From 344af44442388ea7f34cb4c4d88fa1162f8d4ddf Mon Sep 17 00:00:00 2001
-From: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-Date: Wed, 12 Apr 2017 12:38:57 +0000
-Subject: [PATCH] staging: fsl-dpaa2/mac: Add APIs for DPMAC objects
-
-Add the command build/parse APIs for operating on DPMAC
-objects through the DPAA2 Management Complex.
-
-Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/dpmac-cmd.h | 172 +++++++++
- drivers/staging/fsl-dpaa2/mac/dpmac.c     | 620 ++++++++++++++++++++++++++++++
- drivers/staging/fsl-dpaa2/mac/dpmac.h     | 342 ++++++++++++++++
- 3 files changed, 1134 insertions(+)
- create mode 100644 drivers/staging/fsl-dpaa2/mac/dpmac-cmd.h
- create mode 100644 drivers/staging/fsl-dpaa2/mac/dpmac.c
- create mode 100644 drivers/staging/fsl-dpaa2/mac/dpmac.h
-
---- /dev/null
-+++ b/drivers/staging/fsl-dpaa2/mac/dpmac-cmd.h
-@@ -0,0 +1,172 @@
-+/* Copyright 2013-2016 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * * Neither the name of the above-listed copyright holders nor the
-+ * names of any contributors may be used to endorse or promote products
-+ * derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
-+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-+ * POSSIBILITY OF SUCH DAMAGE.
-+ */
-+#ifndef _FSL_DPMAC_CMD_H
-+#define _FSL_DPMAC_CMD_H
-+
-+/* DPMAC Version */
-+#define DPMAC_VER_MAJOR				4
-+#define DPMAC_VER_MINOR				2
-+#define DPMAC_CMD_BASE_VERSION			1
-+#define DPMAC_CMD_ID_OFFSET			4
-+
-+#define DPMAC_CMD(id)	(((id) << DPMAC_CMD_ID_OFFSET) | DPMAC_CMD_BASE_VERSION)
-+
-+/* Command IDs */
-+#define DPMAC_CMDID_CLOSE		DPMAC_CMD(0x800)
-+#define DPMAC_CMDID_OPEN		DPMAC_CMD(0x80c)
-+#define DPMAC_CMDID_CREATE		DPMAC_CMD(0x90c)
-+#define DPMAC_CMDID_DESTROY		DPMAC_CMD(0x98c)
-+#define DPMAC_CMDID_GET_API_VERSION	DPMAC_CMD(0xa0c)
-+
-+#define DPMAC_CMDID_GET_ATTR		DPMAC_CMD(0x004)
-+#define DPMAC_CMDID_RESET		DPMAC_CMD(0x005)
-+
-+#define DPMAC_CMDID_SET_IRQ_ENABLE	DPMAC_CMD(0x012)
-+#define DPMAC_CMDID_GET_IRQ_ENABLE	DPMAC_CMD(0x013)
-+#define DPMAC_CMDID_SET_IRQ_MASK	DPMAC_CMD(0x014)
-+#define DPMAC_CMDID_GET_IRQ_MASK	DPMAC_CMD(0x015)
-+#define DPMAC_CMDID_GET_IRQ_STATUS	DPMAC_CMD(0x016)
-+#define DPMAC_CMDID_CLEAR_IRQ_STATUS	DPMAC_CMD(0x017)
-+
-+#define DPMAC_CMDID_GET_LINK_CFG	DPMAC_CMD(0x0c2)
-+#define DPMAC_CMDID_SET_LINK_STATE	DPMAC_CMD(0x0c3)
-+#define DPMAC_CMDID_GET_COUNTER		DPMAC_CMD(0x0c4)
-+
-+#define DPMAC_CMDID_SET_PORT_MAC_ADDR	DPMAC_CMD(0x0c5)
-+
-+/* Macros for accessing command fields smaller than 1byte */
-+#define DPMAC_MASK(field)        \
-+	GENMASK(DPMAC_##field##_SHIFT + DPMAC_##field##_SIZE - 1, \
-+		DPMAC_##field##_SHIFT)
-+#define dpmac_set_field(var, field, val) \
-+	((var) |= (((val) << DPMAC_##field##_SHIFT) & DPMAC_MASK(field)))
-+#define dpmac_get_field(var, field)      \
-+	(((var) & DPMAC_MASK(field)) >> DPMAC_##field##_SHIFT)
-+
-+struct dpmac_cmd_open {
-+	u32 dpmac_id;
-+};
-+
-+struct dpmac_cmd_create {
-+	u32 mac_id;
-+};
-+
-+struct dpmac_cmd_destroy {
-+	u32 dpmac_id;
-+};
-+
-+struct dpmac_cmd_set_irq_enable {
-+	u8 enable;
-+	u8 pad[3];
-+	u8 irq_index;
-+};
-+
-+struct dpmac_cmd_get_irq_enable {
-+	u32 pad;
-+	u8 irq_index;
-+};
-+
-+struct dpmac_rsp_get_irq_enable {
-+	u8 enabled;
-+};
-+
-+struct dpmac_cmd_set_irq_mask {
-+	u32 mask;
-+	u8 irq_index;
-+};
-+
-+struct dpmac_cmd_get_irq_mask {
-+	u32 pad;
-+	u8 irq_index;
-+};
-+
-+struct dpmac_rsp_get_irq_mask {
-+	u32 mask;
-+};
-+
-+struct dpmac_cmd_get_irq_status {
-+	u32 status;
-+	u8 irq_index;
-+};
-+
-+struct dpmac_rsp_get_irq_status {
-+	u32 status;
-+};
-+
-+struct dpmac_cmd_clear_irq_status {
-+	u32 status;
-+	u8 irq_index;
-+};
-+
-+struct dpmac_rsp_get_attributes {
-+	u8 eth_if;
-+	u8 link_type;
-+	u16 id;
-+	u32 max_rate;
-+};
-+
-+struct dpmac_rsp_get_link_cfg {
-+	u64 options;
-+	u32 rate;
-+};
-+
-+#define DPMAC_STATE_SIZE	1
-+#define DPMAC_STATE_SHIFT	0
-+
-+struct dpmac_cmd_set_link_state {
-+	u64 options;
-+	u32 rate;
-+	u32 pad;
-+	/* only least significant bit is valid */
-+	u8 up;
-+};
-+
-+struct dpmac_cmd_get_counter {
-+	u8 type;
-+};
-+
-+struct dpmac_rsp_get_counter {
-+	u64 pad;
-+	u64 counter;
-+};
-+
-+struct dpmac_rsp_get_api_version {
-+	u16 major;
-+	u16 minor;
-+};
-+
-+struct dpmac_cmd_set_port_mac_addr {
-+	u8 pad[2];
-+	u8 addr[6];
-+};
-+
-+#endif /* _FSL_DPMAC_CMD_H */
---- /dev/null
-+++ b/drivers/staging/fsl-dpaa2/mac/dpmac.c
-@@ -0,0 +1,620 @@
-+/* Copyright 2013-2016 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * * Neither the name of the above-listed copyright holders nor the
-+ * names of any contributors may be used to endorse or promote products
-+ * derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
-+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-+ * POSSIBILITY OF SUCH DAMAGE.
-+ */
-+#include "../../fsl-mc/include/mc-sys.h"
-+#include "../../fsl-mc/include/mc-cmd.h"
-+#include "dpmac.h"
-+#include "dpmac-cmd.h"
-+
-+/**
-+ * dpmac_open() - Open a control session for the specified object.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @dpmac_id:	DPMAC unique ID
-+ * @token:	Returned token; use in subsequent API calls
-+ *
-+ * This function can be used to open a control session for an
-+ * already created object; an object may have been declared in
-+ * the DPL or by calling the dpmac_create function.
-+ * This function returns a unique authentication token,
-+ * associated with the specific object ID and the specific MC
-+ * portal; this token must be used in all subsequent commands for
-+ * this specific object
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpmac_open(struct fsl_mc_io *mc_io,
-+	       u32 cmd_flags,
-+	       int dpmac_id,
-+	       u16 *token)
-+{
-+	struct dpmac_cmd_open *cmd_params;
-+	struct mc_command cmd = { 0 };
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_OPEN,
-+					  cmd_flags,
-+					  0);
-+	cmd_params = (struct dpmac_cmd_open *)cmd.params;
-+	cmd_params->dpmac_id = cpu_to_le32(dpmac_id);
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	*token = mc_cmd_hdr_read_token(&cmd);
-+
-+	return err;
-+}
-+
-+/**
-+ * dpmac_close() - Close the control session of the object
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPMAC object
-+ *
-+ * After this function is called, no further operations are
-+ * allowed on the object without opening a new control session.
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpmac_close(struct fsl_mc_io *mc_io,
-+		u32 cmd_flags,
-+		u16 token)
-+{
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_CLOSE, cmd_flags,
-+					  token);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpmac_create() - Create the DPMAC object.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @dprc_token: Parent container token; '0' for default container
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @cfg:	Configuration structure
-+ * @obj_id:	Returned object id
-+ *
-+ * Create the DPMAC object, allocate required resources and
-+ * perform required initialization.
-+ *
-+ * The function accepts an authentication token of a parent
-+ * container that this object should be assigned to. The token
-+ * can be '0' so the object will be assigned to the default container.
-+ * The newly created object can be opened with the returned
-+ * object id and using the container's associated tokens and MC portals.
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpmac_create(struct fsl_mc_io *mc_io,
-+		 u16 dprc_token,
-+		 u32 cmd_flags,
-+		 const struct dpmac_cfg *cfg,
-+		 u32 *obj_id)
-+{
-+	struct dpmac_cmd_create *cmd_params;
-+	struct mc_command cmd = { 0 };
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_CREATE,
-+					  cmd_flags,
-+					  dprc_token);
-+	cmd_params = (struct dpmac_cmd_create *)cmd.params;
-+	cmd_params->mac_id = cpu_to_le32(cfg->mac_id);
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	*obj_id = mc_cmd_read_object_id(&cmd);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpmac_destroy() - Destroy the DPMAC object and release all its resources.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @dprc_token: Parent container token; '0' for default container
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @object_id:	The object id; it must be a valid id within the container that
-+ * created this object;
-+ *
-+ * The function accepts the authentication token of the parent container that
-+ * created the object (not the one that currently owns the object). The object
-+ * is searched within parent using the provided 'object_id'.
-+ * All tokens to the object must be closed before calling destroy.
-+ *
-+ * Return:	'0' on Success; error code otherwise.
-+ */
-+int dpmac_destroy(struct fsl_mc_io *mc_io,
-+		  u16 dprc_token,
-+		  u32 cmd_flags,
-+		  u32 object_id)
-+{
-+	struct dpmac_cmd_destroy *cmd_params;
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_DESTROY,
-+					  cmd_flags,
-+					  dprc_token);
-+	cmd_params = (struct dpmac_cmd_destroy *)cmd.params;
-+	cmd_params->dpmac_id = cpu_to_le32(object_id);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpmac_set_irq_enable() - Set overall interrupt state.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPMAC object
-+ * @irq_index:	The interrupt index to configure
-+ * @en:		Interrupt state - enable = 1, disable = 0
-+ *
-+ * Allows GPP software to control when interrupts are generated.
-+ * Each interrupt can have up to 32 causes.  The enable/disable control's the
-+ * overall interrupt state. if the interrupt is disabled no causes will cause
-+ * an interrupt.
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpmac_set_irq_enable(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token,
-+			 u8 irq_index,
-+			 u8 en)
-+{
-+	struct dpmac_cmd_set_irq_enable *cmd_params;
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_IRQ_ENABLE,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpmac_cmd_set_irq_enable *)cmd.params;
-+	cmd_params->irq_index = irq_index;
-+	cmd_params->enable = en;
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpmac_get_irq_enable() - Get overall interrupt state
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPMAC object
-+ * @irq_index:	The interrupt index to configure
-+ * @en:		Returned interrupt state - enable = 1, disable = 0
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpmac_get_irq_enable(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token,
-+			 u8 irq_index,
-+			 u8 *en)
-+{
-+	struct dpmac_cmd_get_irq_enable *cmd_params;
-+	struct dpmac_rsp_get_irq_enable *rsp_params;
-+	struct mc_command cmd = { 0 };
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_IRQ_ENABLE,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpmac_cmd_get_irq_enable *)cmd.params;
-+	cmd_params->irq_index = irq_index;
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	rsp_params = (struct dpmac_rsp_get_irq_enable *)cmd.params;
-+	*en = rsp_params->enabled;
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpmac_set_irq_mask() - Set interrupt mask.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPMAC object
-+ * @irq_index:	The interrupt index to configure
-+ * @mask:	Event mask to trigger interrupt;
-+ *		each bit:
-+ *			0 = ignore event
-+ *			1 = consider event for asserting IRQ
-+ *
-+ * Every interrupt can have up to 32 causes and the interrupt model supports
-+ * masking/unmasking each cause independently
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpmac_set_irq_mask(struct fsl_mc_io *mc_io,
-+		       u32 cmd_flags,
-+		       u16 token,
-+		       u8 irq_index,
-+		       u32 mask)
-+{
-+	struct dpmac_cmd_set_irq_mask *cmd_params;
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_IRQ_MASK,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpmac_cmd_set_irq_mask *)cmd.params;
-+	cmd_params->mask = cpu_to_le32(mask);
-+	cmd_params->irq_index = irq_index;
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpmac_get_irq_mask() - Get interrupt mask.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPMAC object
-+ * @irq_index:	The interrupt index to configure
-+ * @mask:	Returned event mask to trigger interrupt
-+ *
-+ * Every interrupt can have up to 32 causes and the interrupt model supports
-+ * masking/unmasking each cause independently
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpmac_get_irq_mask(struct fsl_mc_io *mc_io,
-+		       u32 cmd_flags,
-+		       u16 token,
-+		       u8 irq_index,
-+		       u32 *mask)
-+{
-+	struct dpmac_cmd_get_irq_mask *cmd_params;
-+	struct dpmac_rsp_get_irq_mask *rsp_params;
-+	struct mc_command cmd = { 0 };
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_IRQ_MASK,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpmac_cmd_get_irq_mask *)cmd.params;
-+	cmd_params->irq_index = irq_index;
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	rsp_params = (struct dpmac_rsp_get_irq_mask *)cmd.params;
-+	*mask = le32_to_cpu(rsp_params->mask);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpmac_get_irq_status() - Get the current status of any pending interrupts.
-+ *
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPMAC object
-+ * @irq_index:	The interrupt index to configure
-+ * @status:	Returned interrupts status - one bit per cause:
-+ *			0 = no interrupt pending
-+ *			1 = interrupt pending
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpmac_get_irq_status(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token,
-+			 u8 irq_index,
-+			 u32 *status)
-+{
-+	struct dpmac_cmd_get_irq_status *cmd_params;
-+	struct dpmac_rsp_get_irq_status *rsp_params;
-+	struct mc_command cmd = { 0 };
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_IRQ_STATUS,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpmac_cmd_get_irq_status *)cmd.params;
-+	cmd_params->status = cpu_to_le32(*status);
-+	cmd_params->irq_index = irq_index;
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	rsp_params = (struct dpmac_rsp_get_irq_status *)cmd.params;
-+	*status = le32_to_cpu(rsp_params->status);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpmac_clear_irq_status() - Clear a pending interrupt's status
-+ *
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPMAC object
-+ * @irq_index:	The interrupt index to configure
-+ * @status:	Bits to clear (W1C) - one bit per cause:
-+ *			0 = don't change
-+ *			1 = clear status bit
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpmac_clear_irq_status(struct fsl_mc_io *mc_io,
-+			   u32 cmd_flags,
-+			   u16 token,
-+			   u8 irq_index,
-+			   u32 status)
-+{
-+	struct dpmac_cmd_clear_irq_status *cmd_params;
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_CLEAR_IRQ_STATUS,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpmac_cmd_clear_irq_status *)cmd.params;
-+	cmd_params->status = cpu_to_le32(status);
-+	cmd_params->irq_index = irq_index;
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpmac_get_attributes - Retrieve DPMAC attributes.
-+ *
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPMAC object
-+ * @attr:	Returned object's attributes
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpmac_get_attributes(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token,
-+			 struct dpmac_attr *attr)
-+{
-+	struct dpmac_rsp_get_attributes *rsp_params;
-+	struct mc_command cmd = { 0 };
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_ATTR,
-+					  cmd_flags,
-+					  token);
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	rsp_params = (struct dpmac_rsp_get_attributes *)cmd.params;
-+	attr->eth_if = rsp_params->eth_if;
-+	attr->link_type = rsp_params->link_type;
-+	attr->id = le16_to_cpu(rsp_params->id);
-+	attr->max_rate = le32_to_cpu(rsp_params->max_rate);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpmac_get_link_cfg() - Get Ethernet link configuration
-+ * @mc_io:	Pointer to opaque I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPMAC object
-+ * @cfg:	Returned structure with the link configuration
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpmac_get_link_cfg(struct fsl_mc_io *mc_io,
-+		       u32 cmd_flags,
-+		       u16 token,
-+		       struct dpmac_link_cfg *cfg)
-+{
-+	struct dpmac_rsp_get_link_cfg *rsp_params;
-+	struct mc_command cmd = { 0 };
-+	int err = 0;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_LINK_CFG,
-+					  cmd_flags,
-+					  token);
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	rsp_params = (struct dpmac_rsp_get_link_cfg *)cmd.params;
-+	cfg->options = le64_to_cpu(rsp_params->options);
-+	cfg->rate = le32_to_cpu(rsp_params->rate);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpmac_set_link_state() - Set the Ethernet link status
-+ * @mc_io:	Pointer to opaque I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPMAC object
-+ * @link_state:	Link state configuration
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpmac_set_link_state(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token,
-+			 struct dpmac_link_state *link_state)
-+{
-+	struct dpmac_cmd_set_link_state *cmd_params;
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_LINK_STATE,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpmac_cmd_set_link_state *)cmd.params;
-+	cmd_params->options = cpu_to_le64(link_state->options);
-+	cmd_params->rate = cpu_to_le32(link_state->rate);
-+	cmd_params->up = dpmac_get_field(link_state->up, STATE);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpmac_get_counter() - Read a specific DPMAC counter
-+ * @mc_io:	Pointer to opaque I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPMAC object
-+ * @type:	The requested counter
-+ * @counter:	Returned counter value
-+ *
-+ * Return:	The requested counter; '0' otherwise.
-+ */
-+int dpmac_get_counter(struct fsl_mc_io *mc_io,
-+		      u32 cmd_flags,
-+		      u16 token,
-+		      enum dpmac_counter type,
-+		      u64 *counter)
-+{
-+	struct dpmac_cmd_get_counter *dpmac_cmd;
-+	struct dpmac_rsp_get_counter *dpmac_rsp;
-+	struct mc_command cmd = { 0 };
-+	int err = 0;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_COUNTER,
-+					  cmd_flags,
-+					  token);
-+	dpmac_cmd = (struct dpmac_cmd_get_counter *)cmd.params;
-+	dpmac_cmd->type = type;
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	dpmac_rsp = (struct dpmac_rsp_get_counter *)cmd.params;
-+	*counter = le64_to_cpu(dpmac_rsp->counter);
-+
-+	return 0;
-+}
-+
-+/* untested */
-+int dpmac_set_port_mac_addr(struct fsl_mc_io *mc_io,
-+			    u32 cmd_flags,
-+			    u16 token,
-+			    const u8 addr[6])
-+{
-+	struct dpmac_cmd_set_port_mac_addr *dpmac_cmd;
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_PORT_MAC_ADDR,
-+					  cmd_flags,
-+					  token);
-+	dpmac_cmd = (struct dpmac_cmd_set_port_mac_addr *)cmd.params;
-+	dpmac_cmd->addr[0] = addr[5];
-+	dpmac_cmd->addr[1] = addr[4];
-+	dpmac_cmd->addr[2] = addr[3];
-+	dpmac_cmd->addr[3] = addr[2];
-+	dpmac_cmd->addr[4] = addr[1];
-+	dpmac_cmd->addr[5] = addr[0];
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpmac_get_api_version() - Get Data Path MAC version
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @major_ver:	Major version of data path mac API
-+ * @minor_ver:	Minor version of data path mac API
-+ *
-+ * Return:  '0' on Success; Error code otherwise.
-+ */
-+int dpmac_get_api_version(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 *major_ver,
-+			  u16 *minor_ver)
-+{
-+	struct dpmac_rsp_get_api_version *rsp_params;
-+	struct mc_command cmd = { 0 };
-+	int err;
-+
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_API_VERSION,
-+					cmd_flags,
-+					0);
-+
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	rsp_params = (struct dpmac_rsp_get_api_version *)cmd.params;
-+	*major_ver = le16_to_cpu(rsp_params->major);
-+	*minor_ver = le16_to_cpu(rsp_params->minor);
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/staging/fsl-dpaa2/mac/dpmac.h
-@@ -0,0 +1,342 @@
-+/* Copyright 2013-2016 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * * Neither the name of the above-listed copyright holders nor the
-+ * names of any contributors may be used to endorse or promote products
-+ * derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
-+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-+ * POSSIBILITY OF SUCH DAMAGE.
-+ */
-+#ifndef __FSL_DPMAC_H
-+#define __FSL_DPMAC_H
-+
-+/* Data Path MAC API
-+ * Contains initialization APIs and runtime control APIs for DPMAC
-+ */
-+
-+struct fsl_mc_io;
-+
-+int dpmac_open(struct fsl_mc_io *mc_io,
-+	       u32 cmd_flags,
-+	       int dpmac_id,
-+	       u16 *token);
-+
-+int dpmac_close(struct fsl_mc_io *mc_io,
-+		u32 cmd_flags,
-+		u16 token);
-+
-+/**
-+ * enum dpmac_link_type -  DPMAC link type
-+ * @DPMAC_LINK_TYPE_NONE: No link
-+ * @DPMAC_LINK_TYPE_FIXED: Link is fixed type
-+ * @DPMAC_LINK_TYPE_PHY: Link by PHY ID
-+ * @DPMAC_LINK_TYPE_BACKPLANE: Backplane link type
-+ */
-+enum dpmac_link_type {
-+	DPMAC_LINK_TYPE_NONE,
-+	DPMAC_LINK_TYPE_FIXED,
-+	DPMAC_LINK_TYPE_PHY,
-+	DPMAC_LINK_TYPE_BACKPLANE
-+};
-+
-+/**
-+ * enum dpmac_eth_if - DPMAC Ethrnet interface
-+ * @DPMAC_ETH_IF_MII: MII interface
-+ * @DPMAC_ETH_IF_RMII: RMII interface
-+ * @DPMAC_ETH_IF_SMII: SMII interface
-+ * @DPMAC_ETH_IF_GMII: GMII interface
-+ * @DPMAC_ETH_IF_RGMII: RGMII interface
-+ * @DPMAC_ETH_IF_SGMII: SGMII interface
-+ * @DPMAC_ETH_IF_QSGMII: QSGMII interface
-+ * @DPMAC_ETH_IF_XAUI: XAUI interface
-+ * @DPMAC_ETH_IF_XFI: XFI interface
-+ */
-+enum dpmac_eth_if {
-+	DPMAC_ETH_IF_MII,
-+	DPMAC_ETH_IF_RMII,
-+	DPMAC_ETH_IF_SMII,
-+	DPMAC_ETH_IF_GMII,
-+	DPMAC_ETH_IF_RGMII,
-+	DPMAC_ETH_IF_SGMII,
-+	DPMAC_ETH_IF_QSGMII,
-+	DPMAC_ETH_IF_XAUI,
-+	DPMAC_ETH_IF_XFI
-+};
-+
-+/**
-+ * struct dpmac_cfg - Structure representing DPMAC configuration
-+ * @mac_id:	Represents the Hardware MAC ID; in case of multiple WRIOP,
-+ *		the MAC IDs are continuous.
-+ *		For example:  2 WRIOPs, 16 MACs in each:
-+ *				MAC IDs for the 1st WRIOP: 1-16,
-+ *				MAC IDs for the 2nd WRIOP: 17-32.
-+ */
-+struct dpmac_cfg {
-+	u16 mac_id;
-+};
-+
-+int dpmac_create(struct fsl_mc_io *mc_io,
-+		 u16 dprc_token,
-+		 u32 cmd_flags,
-+		 const struct dpmac_cfg *cfg,
-+		 u32 *obj_id);
-+
-+int dpmac_destroy(struct fsl_mc_io *mc_io,
-+		  u16 dprc_token,
-+		  u32 cmd_flags,
-+		  u32 object_id);
-+
-+/**
-+ * DPMAC IRQ Index and Events
-+ */
-+
-+/**
-+ * IRQ index
-+ */
-+#define DPMAC_IRQ_INDEX				0
-+/**
-+ * IRQ event - indicates a change in link state
-+ */
-+#define DPMAC_IRQ_EVENT_LINK_CFG_REQ		0x00000001
-+/**
-+ * IRQ event - Indicates that the link state changed
-+ */
-+#define DPMAC_IRQ_EVENT_LINK_CHANGED		0x00000002
-+
-+int dpmac_set_irq_enable(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token,
-+			 u8 irq_index,
-+			 u8 en);
-+
-+int dpmac_get_irq_enable(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token,
-+			 u8 irq_index,
-+			 u8 *en);
-+
-+int dpmac_set_irq_mask(struct fsl_mc_io *mc_io,
-+		       u32 cmd_flags,
-+		       u16 token,
-+		       u8 irq_index,
-+		       u32 mask);
-+
-+int dpmac_get_irq_mask(struct fsl_mc_io *mc_io,
-+		       u32 cmd_flags,
-+		       u16 token,
-+		       u8 irq_index,
-+		       u32 *mask);
-+
-+int dpmac_get_irq_status(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token,
-+			 u8 irq_index,
-+			 u32 *status);
-+
-+int dpmac_clear_irq_status(struct fsl_mc_io *mc_io,
-+			   u32 cmd_flags,
-+			   u16 token,
-+			   u8 irq_index,
-+			   u32 status);
-+
-+/**
-+ * struct dpmac_attr - Structure representing DPMAC attributes
-+ * @id:		DPMAC object ID
-+ * @max_rate:	Maximum supported rate - in Mbps
-+ * @eth_if:	Ethernet interface
-+ * @link_type:	link type
-+ */
-+struct dpmac_attr {
-+	u16 id;
-+	u32 max_rate;
-+	enum dpmac_eth_if eth_if;
-+	enum dpmac_link_type link_type;
-+};
-+
-+int dpmac_get_attributes(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token,
-+			 struct dpmac_attr *attr);
-+
-+/**
-+ * DPMAC link configuration/state options
-+ */
-+
-+/**
-+ * Enable auto-negotiation
-+ */
-+#define DPMAC_LINK_OPT_AUTONEG		0x0000000000000001ULL
-+/**
-+ * Enable half-duplex mode
-+ */
-+#define DPMAC_LINK_OPT_HALF_DUPLEX	0x0000000000000002ULL
-+/**
-+ * Enable pause frames
-+ */
-+#define DPMAC_LINK_OPT_PAUSE		0x0000000000000004ULL
-+/**
-+ * Enable a-symmetric pause frames
-+ */
-+#define DPMAC_LINK_OPT_ASYM_PAUSE	0x0000000000000008ULL
-+
-+/**
-+ * struct dpmac_link_cfg - Structure representing DPMAC link configuration
-+ * @rate: Link's rate - in Mbps
-+ * @options: Enable/Disable DPMAC link cfg features (bitmap)
-+ */
-+struct dpmac_link_cfg {
-+	u32 rate;
-+	u64 options;
-+};
-+
-+int dpmac_get_link_cfg(struct fsl_mc_io *mc_io,
-+		       u32 cmd_flags,
-+		       u16 token,
-+		       struct dpmac_link_cfg *cfg);
-+
-+/**
-+ * struct dpmac_link_state - DPMAC link configuration request
-+ * @rate: Rate in Mbps
-+ * @options: Enable/Disable DPMAC link cfg features (bitmap)
-+ * @up: Link state
-+ */
-+struct dpmac_link_state {
-+	u32 rate;
-+	u64 options;
-+	int up;
-+};
-+
-+int dpmac_set_link_state(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token,
-+			 struct dpmac_link_state *link_state);
-+
-+/**
-+ * enum dpmac_counter - DPMAC counter types
-+ * @DPMAC_CNT_ING_FRAME_64: counts 64-bytes frames, good or bad.
-+ * @DPMAC_CNT_ING_FRAME_127: counts 65- to 127-bytes frames, good or bad.
-+ * @DPMAC_CNT_ING_FRAME_255: counts 128- to 255-bytes frames, good or bad.
-+ * @DPMAC_CNT_ING_FRAME_511: counts 256- to 511-bytes frames, good or bad.
-+ * @DPMAC_CNT_ING_FRAME_1023: counts 512- to 1023-bytes frames, good or bad.
-+ * @DPMAC_CNT_ING_FRAME_1518: counts 1024- to 1518-bytes frames, good or bad.
-+ * @DPMAC_CNT_ING_FRAME_1519_MAX: counts 1519-bytes frames and larger
-+ *				  (up to max frame length specified),
-+ *				  good or bad.
-+ * @DPMAC_CNT_ING_FRAG: counts frames which are shorter than 64 bytes received
-+ *			with a wrong CRC
-+ * @DPMAC_CNT_ING_JABBER: counts frames longer than the maximum frame length
-+ *			  specified, with a bad frame check sequence.
-+ * @DPMAC_CNT_ING_FRAME_DISCARD: counts dropped frames due to internal errors.
-+ *				 Occurs when a receive FIFO overflows.
-+ *				 Includes also frames truncated as a result of
-+ *				 the receive FIFO overflow.
-+ * @DPMAC_CNT_ING_ALIGN_ERR: counts frames with an alignment error
-+ *			     (optional used for wrong SFD).
-+ * @DPMAC_CNT_EGR_UNDERSIZED: counts frames transmitted that was less than 64
-+ *			      bytes long with a good CRC.
-+ * @DPMAC_CNT_ING_OVERSIZED: counts frames longer than the maximum frame length
-+ *			     specified, with a good frame check sequence.
-+ * @DPMAC_CNT_ING_VALID_PAUSE_FRAME: counts valid pause frames (regular and PFC)
-+ * @DPMAC_CNT_EGR_VALID_PAUSE_FRAME: counts valid pause frames transmitted
-+ *				     (regular and PFC).
-+ * @DPMAC_CNT_ING_BYTE: counts bytes received except preamble for all valid
-+ *			frames and valid pause frames.
-+ * @DPMAC_CNT_ING_MCAST_FRAME: counts received multicast frames.
-+ * @DPMAC_CNT_ING_BCAST_FRAME: counts received broadcast frames.
-+ * @DPMAC_CNT_ING_ALL_FRAME: counts each good or bad frames received.
-+ * @DPMAC_CNT_ING_UCAST_FRAME: counts received unicast frames.
-+ * @DPMAC_CNT_ING_ERR_FRAME: counts frames received with an error
-+ *			     (except for undersized/fragment frame).
-+ * @DPMAC_CNT_EGR_BYTE: counts bytes transmitted except preamble for all valid
-+ *			frames and valid pause frames transmitted.
-+ * @DPMAC_CNT_EGR_MCAST_FRAME: counts transmitted multicast frames.
-+ * @DPMAC_CNT_EGR_BCAST_FRAME: counts transmitted broadcast frames.
-+ * @DPMAC_CNT_EGR_UCAST_FRAME: counts transmitted unicast frames.
-+ * @DPMAC_CNT_EGR_ERR_FRAME: counts frames transmitted with an error.
-+ * @DPMAC_CNT_ING_GOOD_FRAME: counts frames received without error, including
-+ *			      pause frames.
-+ * @DPMAC_CNT_ENG_GOOD_FRAME: counts frames transmitted without error, including
-+ *			      pause frames.
-+ */
-+enum dpmac_counter {
-+	DPMAC_CNT_ING_FRAME_64,
-+	DPMAC_CNT_ING_FRAME_127,
-+	DPMAC_CNT_ING_FRAME_255,
-+	DPMAC_CNT_ING_FRAME_511,
-+	DPMAC_CNT_ING_FRAME_1023,
-+	DPMAC_CNT_ING_FRAME_1518,
-+	DPMAC_CNT_ING_FRAME_1519_MAX,
-+	DPMAC_CNT_ING_FRAG,
-+	DPMAC_CNT_ING_JABBER,
-+	DPMAC_CNT_ING_FRAME_DISCARD,
-+	DPMAC_CNT_ING_ALIGN_ERR,
-+	DPMAC_CNT_EGR_UNDERSIZED,
-+	DPMAC_CNT_ING_OVERSIZED,
-+	DPMAC_CNT_ING_VALID_PAUSE_FRAME,
-+	DPMAC_CNT_EGR_VALID_PAUSE_FRAME,
-+	DPMAC_CNT_ING_BYTE,
-+	DPMAC_CNT_ING_MCAST_FRAME,
-+	DPMAC_CNT_ING_BCAST_FRAME,
-+	DPMAC_CNT_ING_ALL_FRAME,
-+	DPMAC_CNT_ING_UCAST_FRAME,
-+	DPMAC_CNT_ING_ERR_FRAME,
-+	DPMAC_CNT_EGR_BYTE,
-+	DPMAC_CNT_EGR_MCAST_FRAME,
-+	DPMAC_CNT_EGR_BCAST_FRAME,
-+	DPMAC_CNT_EGR_UCAST_FRAME,
-+	DPMAC_CNT_EGR_ERR_FRAME,
-+	DPMAC_CNT_ING_GOOD_FRAME,
-+	DPMAC_CNT_ENG_GOOD_FRAME
-+};
-+
-+int dpmac_get_counter(struct fsl_mc_io *mc_io,
-+		      u32 cmd_flags,
-+		      u16 token,
-+		      enum dpmac_counter type,
-+		      u64 *counter);
-+
-+/**
-+ * dpmac_set_port_mac_addr() - Set a MAC address associated with the physical
-+ *              port.  This is not used for filtering, MAC is always in
-+ *              promiscuous mode, it is passed to DPNIs through DPNI API for
-+ *              application used.
-+ * @mc_io:	Pointer to opaque I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPMAC object
-+ * @addr:	MAC address to set
-+ *
-+ * Return:	The requested counter; '0' otherwise.
-+ */
-+int dpmac_set_port_mac_addr(struct fsl_mc_io *mc_io,
-+			    u32 cmd_flags,
-+			    u16 token,
-+			    const u8 addr[6]);
-+
-+int dpmac_get_api_version(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 *major_ver,
-+			  u16 *minor_ver);
-+
-+#endif /* __FSL_DPMAC_H */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0157-staging-fsl-dpaa2-mac-Add-Freescale-DPAA2-mac-driver.patch b/target/linux/layerscape/patches-5.4/701-net-0157-staging-fsl-dpaa2-mac-Add-Freescale-DPAA2-mac-driver.patch
deleted file mode 100644
index 750c6ce317..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0157-staging-fsl-dpaa2-mac-Add-Freescale-DPAA2-mac-driver.patch
+++ /dev/null
@@ -1,765 +0,0 @@
-From 50ba3c63dc3f4fbeac32fc5675a00756723d786d Mon Sep 17 00:00:00 2001
-From: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-Date: Wed, 12 Apr 2017 12:42:07 +0000
-Subject: [PATCH] staging: fsl-dpaa2/mac: Add Freescale DPAA2 mac driver
-
-Introduce the DPAA2 mac driver, which manages Datapath
-Media Access Control (DPMAC) objects discovered on the
-MC bus.
-
-This driver works as a proxy between phylib including phy
-drivers and the Management Complex firmware. It receives
-updates on link state changes from PHY lib and forwards
-them to the Management Complex and receives interrupts
-from the Management Complex whenever a request is made to
-change the link state.
-
-This is a squashed commit containing contributions of the
-following owners:
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
-Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
-Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
-Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
-Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
-Signed-off-by: Itai Katz <itai.katz@freescale.com>
-
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
----
- drivers/staging/fsl-dpaa2/Kconfig      |   2 +
- drivers/staging/fsl-dpaa2/Makefile     |   1 +
- drivers/staging/fsl-dpaa2/mac/Kconfig  |  23 ++
- drivers/staging/fsl-dpaa2/mac/Makefile |  10 +
- drivers/staging/fsl-dpaa2/mac/mac.c    | 670 +++++++++++++++++++++++++++++++++
- 5 files changed, 706 insertions(+)
- create mode 100644 drivers/staging/fsl-dpaa2/mac/Kconfig
- create mode 100644 drivers/staging/fsl-dpaa2/mac/Makefile
- create mode 100644 drivers/staging/fsl-dpaa2/mac/mac.c
-
---- a/drivers/staging/fsl-dpaa2/Kconfig
-+++ b/drivers/staging/fsl-dpaa2/Kconfig
-@@ -17,3 +17,5 @@ config FSL_DPAA2_ETHSW
- 	help
- 	  Driver for Freescale DPAA2 Ethernet Switch. Select
- 	  BRIDGE to have support for bridge tools.
-+
-+source "drivers/staging/fsl-dpaa2/mac/Kconfig"
---- a/drivers/staging/fsl-dpaa2/Makefile
-+++ b/drivers/staging/fsl-dpaa2/Makefile
-@@ -4,3 +4,4 @@
- #
- 
- obj-$(CONFIG_FSL_DPAA2_ETHSW)		+= ethsw/
-+obj-$(CONFIG_FSL_DPAA2_MAC)		+= mac/
---- /dev/null
-+++ b/drivers/staging/fsl-dpaa2/mac/Kconfig
-@@ -0,0 +1,23 @@
-+config FSL_DPAA2_MAC
-+	tristate "DPAA2 MAC / PHY interface"
-+	depends on FSL_MC_BUS && FSL_DPAA2
-+	select MDIO_BUS_MUX_MMIOREG
-+	select FSL_XGMAC_MDIO
-+	select FIXED_PHY
-+	---help---
-+	Prototype driver for DPAA2 MAC / PHY interface object.
-+	This driver works as a proxy between phylib including phy drivers and
-+	the MC firmware.  It receives updates on link state changes from PHY
-+	lib and forwards them to MC and receives interrupt from MC whenever
-+	a request is made to change the link state.
-+
-+
-+config FSL_DPAA2_MAC_NETDEVS
-+	bool "Expose net interfaces for PHYs"
-+	default n
-+	depends on FSL_DPAA2_MAC
-+	---help---
-+	Exposes macX net interfaces which allow direct control over MACs and
-+	PHYs.
-+	.
-+	Leave disabled if unsure.
---- /dev/null
-+++ b/drivers/staging/fsl-dpaa2/mac/Makefile
-@@ -0,0 +1,10 @@
-+
-+obj-$(CONFIG_FSL_DPAA2_MAC) += dpaa2-mac.o
-+
-+dpaa2-mac-objs := mac.o dpmac.o
-+
-+all:
-+	make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
-+
-+clean:
-+	make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
---- /dev/null
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -0,0 +1,670 @@
-+/* Copyright 2015 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/msi.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/if_vlan.h>
-+
-+#include <uapi/linux/if_bridge.h>
-+#include <net/netlink.h>
-+
-+#include <linux/of.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_net.h>
-+#include <linux/phy.h>
-+#include <linux/phy_fixed.h>
-+
-+#include "../../fsl-mc/include/mc.h"
-+#include "../../fsl-mc/include/mc-sys.h"
-+
-+#include "dpmac.h"
-+#include "dpmac-cmd.h"
-+
-+struct dpaa2_mac_priv {
-+	struct net_device		*netdev;
-+	struct fsl_mc_device		*mc_dev;
-+	struct dpmac_attr		attr;
-+	struct dpmac_link_state		old_state;
-+};
-+
-+/* TODO: fix the 10G modes, mapping can't be right:
-+ *  XGMII is paralel
-+ *  XAUI is serial, using 8b/10b encoding
-+ *  XFI is also serial but using 64b/66b encoding
-+ * they can't all map to XGMII...
-+ *
-+ * This must be kept in sync with enum dpmac_eth_if.
-+ */
-+static phy_interface_t dpaa2_mac_iface_mode[] =  {
-+	PHY_INTERFACE_MODE_MII,		/* DPMAC_ETH_IF_MII */
-+	PHY_INTERFACE_MODE_RMII,	/* DPMAC_ETH_IF_RMII */
-+	PHY_INTERFACE_MODE_SMII,	/* DPMAC_ETH_IF_SMII */
-+	PHY_INTERFACE_MODE_GMII,	/* DPMAC_ETH_IF_GMII */
-+	PHY_INTERFACE_MODE_RGMII,	/* DPMAC_ETH_IF_RGMII */
-+	PHY_INTERFACE_MODE_SGMII,	/* DPMAC_ETH_IF_SGMII */
-+	PHY_INTERFACE_MODE_QSGMII,	/* DPMAC_ETH_IF_QSGMII */
-+	PHY_INTERFACE_MODE_XGMII,	/* DPMAC_ETH_IF_XAUI */
-+	PHY_INTERFACE_MODE_XGMII,	/* DPMAC_ETH_IF_XFI */
-+};
-+
-+static void dpaa2_mac_link_changed(struct net_device *netdev)
-+{
-+	struct phy_device	*phydev;
-+	struct dpmac_link_state	state = { 0 };
-+	struct dpaa2_mac_priv	*priv = netdev_priv(netdev);
-+	int			err;
-+
-+	/* the PHY just notified us of link state change */
-+	phydev = netdev->phydev;
-+
-+	state.up = !!phydev->link;
-+	if (phydev->link) {
-+		state.rate = phydev->speed;
-+
-+		if (!phydev->duplex)
-+			state.options |= DPMAC_LINK_OPT_HALF_DUPLEX;
-+		if (phydev->autoneg)
-+			state.options |= DPMAC_LINK_OPT_AUTONEG;
-+
-+		netif_carrier_on(netdev);
-+	} else {
-+		netif_carrier_off(netdev);
-+	}
-+
-+	if (priv->old_state.up != state.up ||
-+	    priv->old_state.rate != state.rate ||
-+	    priv->old_state.options != state.options) {
-+		priv->old_state = state;
-+		phy_print_status(phydev);
-+	}
-+
-+	/* We must interrogate MC at all times, because we don't know
-+	 * when and whether a potential DPNI may have read the link state.
-+	 */
-+	err = dpmac_set_link_state(priv->mc_dev->mc_io, 0,
-+				   priv->mc_dev->mc_handle, &state);
-+	if (unlikely(err))
-+		dev_err(&priv->mc_dev->dev, "dpmac_set_link_state: %d\n", err);
-+}
-+
-+#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS
-+static netdev_tx_t dpaa2_mac_drop_frame(struct sk_buff *skb,
-+					struct net_device *dev)
-+{
-+	/* we don't support I/O for now, drop the frame */
-+	dev_kfree_skb_any(skb);
-+	return NETDEV_TX_OK;
-+}
-+
-+static int dpaa2_mac_open(struct net_device *netdev)
-+{
-+	/* start PHY state machine */
-+	phy_start(netdev->phydev);
-+
-+	return 0;
-+}
-+
-+static int dpaa2_mac_stop(struct net_device *netdev)
-+{
-+	if (!netdev->phydev)
-+		goto done;
-+
-+	/* stop PHY state machine */
-+	phy_stop(netdev->phydev);
-+
-+	/* signal link down to firmware */
-+	netdev->phydev->link = 0;
-+	dpaa2_mac_link_changed(netdev);
-+
-+done:
-+	return 0;
-+}
-+
-+static int dpaa2_mac_get_settings(struct net_device *netdev,
-+				  struct ethtool_cmd *cmd)
-+{
-+	return phy_ethtool_gset(netdev->phydev, cmd);
-+}
-+
-+static int dpaa2_mac_set_settings(struct net_device *netdev,
-+				  struct ethtool_cmd *cmd)
-+{
-+	return phy_ethtool_sset(netdev->phydev, cmd);
-+}
-+
-+static void dpaa2_mac_get_stats(struct net_device *netdev,
-+				struct rtnl_link_stats64 *storage)
-+{
-+	struct dpaa2_mac_priv	*priv = netdev_priv(netdev);
-+	u64			tmp;
-+	int			err;
-+
-+	err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle,
-+				DPMAC_CNT_EGR_MCAST_FRAME,
-+				&storage->tx_packets);
-+	if (err)
-+		goto error;
-+	err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle,
-+				DPMAC_CNT_EGR_BCAST_FRAME, &tmp);
-+	if (err)
-+		goto error;
-+	storage->tx_packets += tmp;
-+	err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle,
-+				DPMAC_CNT_EGR_UCAST_FRAME, &tmp);
-+	if (err)
-+		goto error;
-+	storage->tx_packets += tmp;
-+
-+	err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle,
-+				DPMAC_CNT_EGR_UNDERSIZED, &storage->tx_dropped);
-+	if (err)
-+		goto error;
-+	err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle,
-+				DPMAC_CNT_EGR_BYTE, &storage->tx_bytes);
-+	if (err)
-+		goto error;
-+	err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle,
-+				DPMAC_CNT_EGR_ERR_FRAME, &storage->tx_errors);
-+	if (err)
-+		goto error;
-+
-+	err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle,
-+				DPMAC_CNT_ING_ALL_FRAME, &storage->rx_packets);
-+	if (err)
-+		goto error;
-+	err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle,
-+				DPMAC_CNT_ING_MCAST_FRAME, &storage->multicast);
-+	if (err)
-+		goto error;
-+	err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle,
-+				DPMAC_CNT_ING_FRAME_DISCARD,
-+				&storage->rx_dropped);
-+	if (err)
-+		goto error;
-+	err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle,
-+				DPMAC_CNT_ING_ALIGN_ERR, &storage->rx_errors);
-+	if (err)
-+		goto error;
-+	err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle,
-+				DPMAC_CNT_ING_OVERSIZED, &tmp);
-+	if (err)
-+		goto error;
-+	storage->rx_errors += tmp;
-+	err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle,
-+				DPMAC_CNT_ING_BYTE, &storage->rx_bytes);
-+	if (err)
-+		goto error;
-+
-+	return;
-+error:
-+	netdev_err(netdev, "dpmac_get_counter err %d\n", err);
-+}
-+
-+static struct {
-+	enum dpmac_counter id;
-+	char name[ETH_GSTRING_LEN];
-+} dpaa2_mac_counters[] =  {
-+	{DPMAC_CNT_ING_ALL_FRAME,		"rx all frames"},
-+	{DPMAC_CNT_ING_GOOD_FRAME,		"rx frames ok"},
-+	{DPMAC_CNT_ING_ERR_FRAME,		"rx frame errors"},
-+	{DPMAC_CNT_ING_FRAME_DISCARD,		"rx frame discards"},
-+	{DPMAC_CNT_ING_UCAST_FRAME,		"rx u-cast"},
-+	{DPMAC_CNT_ING_BCAST_FRAME,		"rx b-cast"},
-+	{DPMAC_CNT_ING_MCAST_FRAME,		"rx m-cast"},
-+	{DPMAC_CNT_ING_FRAME_64,		"rx 64 bytes"},
-+	{DPMAC_CNT_ING_FRAME_127,		"rx 65-127 bytes"},
-+	{DPMAC_CNT_ING_FRAME_255,		"rx 128-255 bytes"},
-+	{DPMAC_CNT_ING_FRAME_511,		"rx 256-511 bytes"},
-+	{DPMAC_CNT_ING_FRAME_1023,		"rx 512-1023 bytes"},
-+	{DPMAC_CNT_ING_FRAME_1518,		"rx 1024-1518 bytes"},
-+	{DPMAC_CNT_ING_FRAME_1519_MAX,		"rx 1519-max bytes"},
-+	{DPMAC_CNT_ING_FRAG,			"rx frags"},
-+	{DPMAC_CNT_ING_JABBER,			"rx jabber"},
-+	{DPMAC_CNT_ING_ALIGN_ERR,		"rx align errors"},
-+	{DPMAC_CNT_ING_OVERSIZED,		"rx oversized"},
-+	{DPMAC_CNT_ING_VALID_PAUSE_FRAME,	"rx pause"},
-+	{DPMAC_CNT_ING_BYTE,			"rx bytes"},
-+	{DPMAC_CNT_ENG_GOOD_FRAME,		"tx frames ok"},
-+	{DPMAC_CNT_EGR_UCAST_FRAME,		"tx u-cast"},
-+	{DPMAC_CNT_EGR_MCAST_FRAME,		"tx m-cast"},
-+	{DPMAC_CNT_EGR_BCAST_FRAME,		"tx b-cast"},
-+	{DPMAC_CNT_EGR_ERR_FRAME,		"tx frame errors"},
-+	{DPMAC_CNT_EGR_UNDERSIZED,		"tx undersized"},
-+	{DPMAC_CNT_EGR_VALID_PAUSE_FRAME,	"tx b-pause"},
-+	{DPMAC_CNT_EGR_BYTE,			"tx bytes"},
-+
-+};
-+
-+static void dpaa2_mac_get_strings(struct net_device *netdev,
-+				  u32 stringset, u8 *data)
-+{
-+	int i;
-+
-+	switch (stringset) {
-+	case ETH_SS_STATS:
-+		for (i = 0; i < ARRAY_SIZE(dpaa2_mac_counters); i++)
-+			memcpy(data + i * ETH_GSTRING_LEN,
-+			       dpaa2_mac_counters[i].name,
-+			       ETH_GSTRING_LEN);
-+		break;
-+	}
-+}
-+
-+static void dpaa2_mac_get_ethtool_stats(struct net_device *netdev,
-+					struct ethtool_stats *stats,
-+					u64 *data)
-+{
-+	struct dpaa2_mac_priv	*priv = netdev_priv(netdev);
-+	int			i;
-+	int			err;
-+
-+	for (i = 0; i < ARRAY_SIZE(dpaa2_mac_counters); i++) {
-+		err = dpmac_get_counter(priv->mc_dev->mc_io,
-+					0,
-+					priv->mc_dev->mc_handle,
-+					dpaa2_mac_counters[i].id, &data[i]);
-+		if (err)
-+			netdev_err(netdev, "dpmac_get_counter[%s] err %d\n",
-+				   dpaa2_mac_counters[i].name, err);
-+	}
-+}
-+
-+static int dpaa2_mac_get_sset_count(struct net_device *dev, int sset)
-+{
-+	switch (sset) {
-+	case ETH_SS_STATS:
-+		return ARRAY_SIZE(dpaa2_mac_counters);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
-+static const struct net_device_ops dpaa2_mac_ndo_ops = {
-+	.ndo_start_xmit		= &dpaa2_mac_drop_frame,
-+	.ndo_open		= &dpaa2_mac_open,
-+	.ndo_stop		= &dpaa2_mac_stop,
-+	.ndo_get_stats64	= &dpaa2_mac_get_stats,
-+};
-+
-+static const struct ethtool_ops dpaa2_mac_ethtool_ops = {
-+	.get_settings		= &dpaa2_mac_get_settings,
-+	.set_settings		= &dpaa2_mac_set_settings,
-+	.get_strings		= &dpaa2_mac_get_strings,
-+	.get_ethtool_stats	= &dpaa2_mac_get_ethtool_stats,
-+	.get_sset_count		= &dpaa2_mac_get_sset_count,
-+};
-+#endif /* CONFIG_FSL_DPAA2_MAC_NETDEVS */
-+
-+static void configure_link(struct dpaa2_mac_priv *priv,
-+			   struct dpmac_link_cfg *cfg)
-+{
-+	struct phy_device *phydev = priv->netdev->phydev;
-+
-+	if (unlikely(!phydev))
-+		return;
-+
-+	phydev->speed = cfg->rate;
-+	phydev->duplex  = !!(cfg->options & DPMAC_LINK_OPT_HALF_DUPLEX);
-+
-+	if (cfg->options & DPMAC_LINK_OPT_AUTONEG) {
-+		phydev->autoneg = 1;
-+		phydev->advertising |= ADVERTISED_Autoneg;
-+	} else {
-+		phydev->autoneg = 0;
-+		phydev->advertising &= ~ADVERTISED_Autoneg;
-+	}
-+
-+	phy_start_aneg(phydev);
-+}
-+
-+static irqreturn_t dpaa2_mac_irq_handler(int irq_num, void *arg)
-+{
-+	struct device *dev = (struct device *)arg;
-+	struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev);
-+	struct dpaa2_mac_priv *priv = dev_get_drvdata(dev);
-+	struct dpmac_link_cfg link_cfg;
-+	u32 status;
-+	int err;
-+
-+	err = dpmac_get_irq_status(mc_dev->mc_io, 0, mc_dev->mc_handle,
-+				   DPMAC_IRQ_INDEX, &status);
-+	if (unlikely(err || !status))
-+		return IRQ_NONE;
-+
-+	/* DPNI-initiated link configuration; 'ifconfig up' also calls this */
-+	if (status & DPMAC_IRQ_EVENT_LINK_CFG_REQ) {
-+		err = dpmac_get_link_cfg(mc_dev->mc_io, 0, mc_dev->mc_handle,
-+					 &link_cfg);
-+		if (unlikely(err))
-+			goto out;
-+
-+		configure_link(priv, &link_cfg);
-+	}
-+
-+out:
-+	dpmac_clear_irq_status(mc_dev->mc_io, 0, mc_dev->mc_handle,
-+			       DPMAC_IRQ_INDEX, status);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int setup_irqs(struct fsl_mc_device *mc_dev)
-+{
-+	int err = 0;
-+	struct fsl_mc_device_irq *irq;
-+
-+	err = fsl_mc_allocate_irqs(mc_dev);
-+	if (err) {
-+		dev_err(&mc_dev->dev, "fsl_mc_allocate_irqs err %d\n", err);
-+		return err;
-+	}
-+
-+	irq = mc_dev->irqs[0];
-+	err = devm_request_threaded_irq(&mc_dev->dev, irq->msi_desc->irq,
-+					NULL, &dpaa2_mac_irq_handler,
-+					IRQF_NO_SUSPEND | IRQF_ONESHOT,
-+					dev_name(&mc_dev->dev), &mc_dev->dev);
-+	if (err) {
-+		dev_err(&mc_dev->dev, "devm_request_threaded_irq err %d\n",
-+			err);
-+		goto free_irq;
-+	}
-+
-+	err = dpmac_set_irq_mask(mc_dev->mc_io, 0, mc_dev->mc_handle,
-+				 DPMAC_IRQ_INDEX, DPMAC_IRQ_EVENT_LINK_CFG_REQ);
-+	if (err) {
-+		dev_err(&mc_dev->dev, "dpmac_set_irq_mask err %d\n", err);
-+		goto free_irq;
-+	}
-+	err = dpmac_set_irq_enable(mc_dev->mc_io, 0, mc_dev->mc_handle,
-+				   DPMAC_IRQ_INDEX, 1);
-+	if (err) {
-+		dev_err(&mc_dev->dev, "dpmac_set_irq_enable err %d\n", err);
-+		goto free_irq;
-+	}
-+
-+	return 0;
-+
-+free_irq:
-+	fsl_mc_free_irqs(mc_dev);
-+
-+	return err;
-+}
-+
-+static void teardown_irqs(struct fsl_mc_device *mc_dev)
-+{
-+	int err;
-+
-+	err = dpmac_set_irq_enable(mc_dev->mc_io, 0, mc_dev->mc_handle,
-+				   DPMAC_IRQ_INDEX, 0);
-+	if (err)
-+		dev_err(&mc_dev->dev, "dpmac_set_irq_enable err %d\n", err);
-+
-+	fsl_mc_free_irqs(mc_dev);
-+}
-+
-+static struct device_node *find_dpmac_node(struct device *dev, u16 dpmac_id)
-+{
-+	struct device_node *dpmacs, *dpmac = NULL;
-+	struct device_node *mc_node = dev->of_node;
-+	u32 id;
-+	int err;
-+
-+	dpmacs = of_find_node_by_name(mc_node, "dpmacs");
-+	if (!dpmacs) {
-+		dev_err(dev, "No dpmacs subnode in device-tree\n");
-+		return NULL;
-+	}
-+
-+	while ((dpmac = of_get_next_child(dpmacs, dpmac))) {
-+		err = of_property_read_u32(dpmac, "reg", &id);
-+		if (err)
-+			continue;
-+		if (id == dpmac_id)
-+			return dpmac;
-+	}
-+
-+	return NULL;
-+}
-+
-+static int dpaa2_mac_probe(struct fsl_mc_device *mc_dev)
-+{
-+	struct device		*dev;
-+	struct dpaa2_mac_priv	*priv = NULL;
-+	struct device_node	*phy_node, *dpmac_node;
-+	struct net_device	*netdev;
-+	phy_interface_t		if_mode;
-+	int			err = 0;
-+
-+	dev = &mc_dev->dev;
-+
-+	/* prepare a net_dev structure to make the phy lib API happy */
-+	netdev = alloc_etherdev(sizeof(*priv));
-+	if (!netdev) {
-+		dev_err(dev, "alloc_etherdev error\n");
-+		err = -ENOMEM;
-+		goto err_exit;
-+	}
-+	priv = netdev_priv(netdev);
-+	priv->mc_dev = mc_dev;
-+	priv->netdev = netdev;
-+
-+	SET_NETDEV_DEV(netdev, dev);
-+
-+#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS
-+	snprintf(netdev->name, IFNAMSIZ, "mac%d", mc_dev->obj_desc.id);
-+#endif
-+
-+	dev_set_drvdata(dev, priv);
-+
-+	err = fsl_mc_portal_allocate(mc_dev, 0, &mc_dev->mc_io);
-+	if (err || !mc_dev->mc_io) {
-+		dev_err(dev, "fsl_mc_portal_allocate error: %d\n", err);
-+		err = -ENODEV;
-+		goto err_free_netdev;
-+	}
-+
-+	err = dpmac_open(mc_dev->mc_io, 0, mc_dev->obj_desc.id,
-+			 &mc_dev->mc_handle);
-+	if (err || !mc_dev->mc_handle) {
-+		dev_err(dev, "dpmac_open error: %d\n", err);
-+		err = -ENODEV;
-+		goto err_free_mcp;
-+	}
-+
-+	err = dpmac_get_attributes(mc_dev->mc_io, 0,
-+				   mc_dev->mc_handle, &priv->attr);
-+	if (err) {
-+		dev_err(dev, "dpmac_get_attributes err %d\n", err);
-+		err = -EINVAL;
-+		goto err_close;
-+	}
-+
-+	/* Look up the DPMAC node in the device-tree. */
-+	dpmac_node = find_dpmac_node(dev, priv->attr.id);
-+	if (!dpmac_node) {
-+		dev_err(dev, "No dpmac@%d subnode found.\n", priv->attr.id);
-+		err = -ENODEV;
-+		goto err_close;
-+	}
-+
-+	err = setup_irqs(mc_dev);
-+	if (err) {
-+		err = -EFAULT;
-+		goto err_close;
-+	}
-+
-+#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS
-+	/* OPTIONAL, register netdev just to make it visible to the user */
-+	netdev->netdev_ops = &dpaa2_mac_ndo_ops;
-+	netdev->ethtool_ops = &dpaa2_mac_ethtool_ops;
-+
-+	/* phy starts up enabled so netdev should be up too */
-+	netdev->flags |= IFF_UP;
-+
-+	err = register_netdev(priv->netdev);
-+	if (err < 0) {
-+		dev_err(dev, "register_netdev error %d\n", err);
-+		err = -ENODEV;
-+		goto err_free_irq;
-+	}
-+#endif /* CONFIG_FSL_DPAA2_MAC_NETDEVS */
-+
-+	/* probe the PHY as a fixed-link if the link type declared in DPC
-+	 * explicitly mandates this
-+	 */
-+	if (priv->attr.link_type == DPMAC_LINK_TYPE_FIXED)
-+		goto probe_fixed_link;
-+
-+	if (priv->attr.eth_if < ARRAY_SIZE(dpaa2_mac_iface_mode)) {
-+		if_mode = dpaa2_mac_iface_mode[priv->attr.eth_if];
-+		dev_dbg(dev, "\tusing if mode %s for eth_if %d\n",
-+			phy_modes(if_mode), priv->attr.eth_if);
-+	} else {
-+		dev_warn(dev, "Unexpected interface mode %d, will probe as fixed link\n",
-+			 priv->attr.eth_if);
-+		goto probe_fixed_link;
-+	}
-+
-+	/* try to connect to the PHY */
-+	phy_node = of_parse_phandle(dpmac_node, "phy-handle", 0);
-+	if (!phy_node) {
-+		if (!phy_node) {
-+			dev_err(dev, "dpmac node has no phy-handle property\n");
-+			err = -ENODEV;
-+			goto err_no_phy;
-+		}
-+	}
-+	netdev->phydev = of_phy_connect(netdev, phy_node,
-+					&dpaa2_mac_link_changed, 0, if_mode);
-+	if (!netdev->phydev) {
-+		/* No need for dev_err(); the kernel's loud enough as it is. */
-+		dev_dbg(dev, "Can't of_phy_connect() now.\n");
-+		/* We might be waiting for the MDIO MUX to probe, so defer
-+		 * our own probing.
-+		 */
-+		err = -EPROBE_DEFER;
-+		goto err_defer;
-+	}
-+	dev_info(dev, "Connected to %s PHY.\n", phy_modes(if_mode));
-+
-+probe_fixed_link:
-+	if (!netdev->phydev) {
-+		struct fixed_phy_status status = {
-+			.link = 1,
-+			/* fixed-phys don't support 10Gbps speed for now */
-+			.speed = 1000,
-+			.duplex = 1,
-+		};
-+
-+		/* try to register a fixed link phy */
-+		netdev->phydev = fixed_phy_register(PHY_POLL, &status, NULL);
-+		if (!netdev->phydev || IS_ERR(netdev->phydev)) {
-+			dev_err(dev, "error trying to register fixed PHY\n");
-+			/* So we don't crash unregister_netdev() later on */
-+			netdev->phydev = NULL;
-+			err = -EFAULT;
-+			goto err_no_phy;
-+		}
-+		dev_info(dev, "Registered fixed PHY.\n");
-+	}
-+
-+	/* start PHY state machine */
-+#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS
-+	dpaa2_mac_open(netdev);
-+#else /* CONFIG_FSL_DPAA2_MAC_NETDEVS */
-+	phy_start(netdev->phydev);
-+#endif /* CONFIG_FSL_DPAA2_MAC_NETDEVS */
-+	return 0;
-+
-+err_defer:
-+err_no_phy:
-+#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS
-+	unregister_netdev(netdev);
-+err_free_irq:
-+#endif
-+	teardown_irqs(mc_dev);
-+err_close:
-+	dpmac_close(mc_dev->mc_io, 0, mc_dev->mc_handle);
-+err_free_mcp:
-+	fsl_mc_portal_free(mc_dev->mc_io);
-+err_free_netdev:
-+	free_netdev(netdev);
-+err_exit:
-+	return err;
-+}
-+
-+static int dpaa2_mac_remove(struct fsl_mc_device *mc_dev)
-+{
-+	struct device		*dev = &mc_dev->dev;
-+	struct dpaa2_mac_priv	*priv = dev_get_drvdata(dev);
-+
-+#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS
-+	unregister_netdev(priv->netdev);
-+#endif
-+	teardown_irqs(priv->mc_dev);
-+	dpmac_close(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle);
-+	fsl_mc_portal_free(priv->mc_dev->mc_io);
-+	free_netdev(priv->netdev);
-+
-+	dev_set_drvdata(dev, NULL);
-+	kfree(priv);
-+
-+	return 0;
-+}
-+
-+static const struct fsl_mc_device_id dpaa2_mac_match_id_table[] = {
-+	{
-+		.vendor = FSL_MC_VENDOR_FREESCALE,
-+		.obj_type = "dpmac",
-+	},
-+	{ .vendor = 0x0 }
-+};
-+MODULE_DEVICE_TABLE(fslmc, dpaa2_mac_match_id_table);
-+
-+static struct fsl_mc_driver dpaa2_mac_drv = {
-+	.driver = {
-+		.name		= KBUILD_MODNAME,
-+		.owner		= THIS_MODULE,
-+	},
-+	.probe		= dpaa2_mac_probe,
-+	.remove		= dpaa2_mac_remove,
-+	.match_id_table = dpaa2_mac_match_id_table,
-+};
-+
-+module_fsl_mc_driver(dpaa2_mac_drv);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("DPAA2 PHY proxy interface driver");
diff --git a/target/linux/layerscape/patches-5.4/701-net-0158-staging-fsl-dpaa2-mac-Remove-link-type-from-phy-sel-.patch b/target/linux/layerscape/patches-5.4/701-net-0158-staging-fsl-dpaa2-mac-Remove-link-type-from-phy-sel-.patch
deleted file mode 100644
index 8a51f15b14..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0158-staging-fsl-dpaa2-mac-Remove-link-type-from-phy-sel-.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 01fc2236f7fe0c094c26635e738331abec0ac103 Mon Sep 17 00:00:00 2001
-From: costi <constantin.tudor@freescale.com>
-Date: Tue, 7 Mar 2017 16:13:07 +0200
-Subject: [PATCH] staging: fsl-dpaa2/mac: Remove link type from phy sel logic
-
-Signed-off-by: Constantin Tudor <constantin.tudor@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 13 ++++---------
- 1 file changed, 4 insertions(+), 9 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -545,8 +545,11 @@ static int dpaa2_mac_probe(struct fsl_mc
- 	/* probe the PHY as a fixed-link if the link type declared in DPC
- 	 * explicitly mandates this
- 	 */
--	if (priv->attr.link_type == DPMAC_LINK_TYPE_FIXED)
-+
-+	phy_node = of_parse_phandle(dpmac_node, "phy-handle", 0);
-+	if (!phy_node) {
- 		goto probe_fixed_link;
-+	}
- 
- 	if (priv->attr.eth_if < ARRAY_SIZE(dpaa2_mac_iface_mode)) {
- 		if_mode = dpaa2_mac_iface_mode[priv->attr.eth_if];
-@@ -559,14 +562,6 @@ static int dpaa2_mac_probe(struct fsl_mc
- 	}
- 
- 	/* try to connect to the PHY */
--	phy_node = of_parse_phandle(dpmac_node, "phy-handle", 0);
--	if (!phy_node) {
--		if (!phy_node) {
--			dev_err(dev, "dpmac node has no phy-handle property\n");
--			err = -ENODEV;
--			goto err_no_phy;
--		}
--	}
- 	netdev->phydev = of_phy_connect(netdev, phy_node,
- 					&dpaa2_mac_link_changed, 0, if_mode);
- 	if (!netdev->phydev) {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0159-staging-fsl-dpaa2-mac-Update-ethtool-ops.patch b/target/linux/layerscape/patches-5.4/701-net-0159-staging-fsl-dpaa2-mac-Update-ethtool-ops.patch
deleted file mode 100644
index 5276ee1c2a..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0159-staging-fsl-dpaa2-mac-Update-ethtool-ops.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From f964e8840c12e0659c4cfe7aa7d66b310e09ca51 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Tue, 22 Aug 2017 15:00:29 +0300
-Subject: [PATCH] staging: fsl-dpaa2/mac: Update ethtool ops
-
-Ethtool ops get/set_settings() are deprecated, so implement
-get/set_link_ksettings() instead.
-
-These now call the corresponding phy_ethtool_ksettings_*
-generic functions, as the old ones also got deprecated
-and removed from the kernel entirely.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 18 ++++++++++--------
- 1 file changed, 10 insertions(+), 8 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -152,16 +152,18 @@ done:
- 	return 0;
- }
- 
--static int dpaa2_mac_get_settings(struct net_device *netdev,
--				  struct ethtool_cmd *cmd)
-+static int dpaa2_mac_get_link_ksettings(struct net_device *netdev,
-+					struct ethtool_link_ksettings *ks)
- {
--	return phy_ethtool_gset(netdev->phydev, cmd);
-+	phy_ethtool_ksettings_get(netdev->phydev, ks);
-+
-+	return 0;
- }
- 
--static int dpaa2_mac_set_settings(struct net_device *netdev,
--				  struct ethtool_cmd *cmd)
-+static int dpaa2_mac_set_link_ksettings(struct net_device *netdev,
-+					const struct ethtool_link_ksettings *ks)
- {
--	return phy_ethtool_sset(netdev->phydev, cmd);
-+	return phy_ethtool_ksettings_set(netdev->phydev, ks);
- }
- 
- static void dpaa2_mac_get_stats(struct net_device *netdev,
-@@ -319,8 +321,8 @@ static const struct net_device_ops dpaa2
- };
- 
- static const struct ethtool_ops dpaa2_mac_ethtool_ops = {
--	.get_settings		= &dpaa2_mac_get_settings,
--	.set_settings		= &dpaa2_mac_set_settings,
-+	.get_link_ksettings	= &dpaa2_mac_get_link_ksettings,
-+	.set_link_ksettings	= &dpaa2_mac_set_link_ksettings,
- 	.get_strings		= &dpaa2_mac_get_strings,
- 	.get_ethtool_stats	= &dpaa2_mac_get_ethtool_stats,
- 	.get_sset_count		= &dpaa2_mac_get_sset_count,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0160-staging-fsl-dpaa2-mac-Comply-with-mc-bus-header-upda.patch b/target/linux/layerscape/patches-5.4/701-net-0160-staging-fsl-dpaa2-mac-Comply-with-mc-bus-header-upda.patch
deleted file mode 100644
index 7b101f2ec8..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0160-staging-fsl-dpaa2-mac-Comply-with-mc-bus-header-upda.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From ed2efc45fb3130739ac3d9578054c67ee8ec6470 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Wed, 23 Aug 2017 17:51:23 +0300
-Subject: [PATCH] staging: fsl-dpaa2/mac: Comply with mc bus header updates
-
-The fsl-mc bus driver reorganized some of its headers, so
-update our includes accordingly.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/dpmac.c | 3 +--
- drivers/staging/fsl-dpaa2/mac/mac.c   | 1 -
- 2 files changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/dpmac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/dpmac.c
-@@ -29,8 +29,7 @@
-  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-  * POSSIBILITY OF SUCH DAMAGE.
-  */
--#include "../../fsl-mc/include/mc-sys.h"
--#include "../../fsl-mc/include/mc-cmd.h"
-+#include "../../fsl-mc/include/mc.h"
- #include "dpmac.h"
- #include "dpmac-cmd.h"
- 
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -47,7 +47,6 @@
- #include <linux/phy_fixed.h>
- 
- #include "../../fsl-mc/include/mc.h"
--#include "../../fsl-mc/include/mc-sys.h"
- 
- #include "dpmac.h"
- #include "dpmac-cmd.h"
diff --git a/target/linux/layerscape/patches-5.4/701-net-0161-staging-fsl-dpaa2-mac-Request-atomic-context-MC-port.patch b/target/linux/layerscape/patches-5.4/701-net-0161-staging-fsl-dpaa2-mac-Request-atomic-context-MC-port.patch
deleted file mode 100644
index 95d0fb6fbe..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0161-staging-fsl-dpaa2-mac-Request-atomic-context-MC-port.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 001bad547937cdd667adee45b5c7ebe78a1de1d0 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Fri, 22 Sep 2017 12:20:02 +0300
-Subject: [PATCH] staging: fsl-dpaa2/mac: Request atomic context MC portals
-
-The MAC driver may need to issue MC commands while in atomic
-context (e.g. dpaa2_mac_get_stats can be called from a critical
-section), so we need to use MC portals that don't sleep while
-waiting for a command response to arrive.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -490,7 +490,9 @@ static int dpaa2_mac_probe(struct fsl_mc
- 
- 	dev_set_drvdata(dev, priv);
- 
--	err = fsl_mc_portal_allocate(mc_dev, 0, &mc_dev->mc_io);
-+	/* We may need to issue MC commands while in atomic context */
-+	err = fsl_mc_portal_allocate(mc_dev, FSL_MC_IO_ATOMIC_CONTEXT_PORTAL,
-+				     &mc_dev->mc_io);
- 	if (err || !mc_dev->mc_io) {
- 		dev_err(dev, "fsl_mc_portal_allocate error: %d\n", err);
- 		err = -ENODEV;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0162-staging-fsl-dpaa2-mac-Remove-redundant-free.patch b/target/linux/layerscape/patches-5.4/701-net-0162-staging-fsl-dpaa2-mac-Remove-redundant-free.patch
deleted file mode 100644
index 30a85abbd5..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0162-staging-fsl-dpaa2-mac-Remove-redundant-free.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From c21f8562457b994b7e4ba46cba9fd05dc0e25e20 Mon Sep 17 00:00:00 2001
-From: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-Date: Thu, 28 Sep 2017 10:58:24 +0000
-Subject: [PATCH] staging: fsl-dpaa2/mac: Remove redundant free
-
-free_netdev (put_device) already handles freeing the private data
-structure, and KASAN will complain due to a free after free if we
-explicitly do the same afterwards.
-
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -638,7 +638,6 @@ static int dpaa2_mac_remove(struct fsl_m
- 	free_netdev(priv->netdev);
- 
- 	dev_set_drvdata(dev, NULL);
--	kfree(priv);
- 
- 	return 0;
- }
diff --git a/target/linux/layerscape/patches-5.4/701-net-0163-staging-fsl-dpaa2-mac-Cleanup-code.patch b/target/linux/layerscape/patches-5.4/701-net-0163-staging-fsl-dpaa2-mac-Cleanup-code.patch
deleted file mode 100644
index 7aa7b281d9..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0163-staging-fsl-dpaa2-mac-Cleanup-code.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From c2dfd6095bd7f812c9a1aa4d381022579702af4d Mon Sep 17 00:00:00 2001
-From: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-Date: Thu, 5 Oct 2017 08:05:55 +0000
-Subject: [PATCH] staging: fsl-dpaa2/mac: Cleanup code
-
-- move dpaa2_mac_open and dpaa2_mac_stop out of
-  CONFIG_FSL_DPAA2_MAC_NETDEVS, since their implementation is necessary
-  regardless of it
-- reorder ndo ops to match function implementation order
-- update comment to describe the phy connection mode that's to be used -
-  it no longer depends on DPC, but on the device tree
-
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 31 +++++++++++++------------------
- 1 file changed, 13 insertions(+), 18 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -118,15 +118,6 @@ static void dpaa2_mac_link_changed(struc
- 		dev_err(&priv->mc_dev->dev, "dpmac_set_link_state: %d\n", err);
- }
- 
--#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS
--static netdev_tx_t dpaa2_mac_drop_frame(struct sk_buff *skb,
--					struct net_device *dev)
--{
--	/* we don't support I/O for now, drop the frame */
--	dev_kfree_skb_any(skb);
--	return NETDEV_TX_OK;
--}
--
- static int dpaa2_mac_open(struct net_device *netdev)
- {
- 	/* start PHY state machine */
-@@ -151,6 +142,15 @@ done:
- 	return 0;
- }
- 
-+#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS
-+static netdev_tx_t dpaa2_mac_drop_frame(struct sk_buff *skb,
-+					struct net_device *dev)
-+{
-+	/* we don't support I/O for now, drop the frame */
-+	dev_kfree_skb_any(skb);
-+	return NETDEV_TX_OK;
-+}
-+
- static int dpaa2_mac_get_link_ksettings(struct net_device *netdev,
- 					struct ethtool_link_ksettings *ks)
- {
-@@ -313,9 +313,9 @@ static int dpaa2_mac_get_sset_count(stru
- }
- 
- static const struct net_device_ops dpaa2_mac_ndo_ops = {
--	.ndo_start_xmit		= &dpaa2_mac_drop_frame,
- 	.ndo_open		= &dpaa2_mac_open,
- 	.ndo_stop		= &dpaa2_mac_stop,
-+	.ndo_start_xmit		= &dpaa2_mac_drop_frame,
- 	.ndo_get_stats64	= &dpaa2_mac_get_stats,
- };
- 
-@@ -545,10 +545,9 @@ static int dpaa2_mac_probe(struct fsl_mc
- 	}
- #endif /* CONFIG_FSL_DPAA2_MAC_NETDEVS */
- 
--	/* probe the PHY as a fixed-link if the link type declared in DPC
--	 * explicitly mandates this
-+	/* probe the PHY as a fixed-link if there's a phy-handle defined
-+	 * in the device tree
- 	 */
--
- 	phy_node = of_parse_phandle(dpmac_node, "phy-handle", 0);
- 	if (!phy_node) {
- 		goto probe_fixed_link;
-@@ -599,12 +598,8 @@ probe_fixed_link:
- 		dev_info(dev, "Registered fixed PHY.\n");
- 	}
- 
--	/* start PHY state machine */
--#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS
- 	dpaa2_mac_open(netdev);
--#else /* CONFIG_FSL_DPAA2_MAC_NETDEVS */
--	phy_start(netdev->phydev);
--#endif /* CONFIG_FSL_DPAA2_MAC_NETDEVS */
-+
- 	return 0;
- 
- err_defer:
diff --git a/target/linux/layerscape/patches-5.4/701-net-0164-staging-fsl-dpaa2-mac-Free-phydev-on-unbind.patch b/target/linux/layerscape/patches-5.4/701-net-0164-staging-fsl-dpaa2-mac-Free-phydev-on-unbind.patch
deleted file mode 100644
index 62cce28fee..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0164-staging-fsl-dpaa2-mac-Free-phydev-on-unbind.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 665b0217a4c99c14b680878f87bfa83c664de737 Mon Sep 17 00:00:00 2001
-From: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-Date: Thu, 28 Sep 2017 11:07:33 +0000
-Subject: [PATCH] staging: fsl-dpaa2/mac: Free phydev on unbind
-
-Stop polling and unregister / disconnect the phydev structure on DPAA2
-mac driver unbind.
-
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -623,6 +623,15 @@ static int dpaa2_mac_remove(struct fsl_m
- {
- 	struct device		*dev = &mc_dev->dev;
- 	struct dpaa2_mac_priv	*priv = dev_get_drvdata(dev);
-+	struct net_device	*netdev = priv->netdev;
-+
-+	dpaa2_mac_stop(netdev);
-+
-+	if (phy_is_pseudo_fixed_link(netdev->phydev))
-+		fixed_phy_unregister(netdev->phydev);
-+	else
-+		phy_disconnect(netdev->phydev);
-+	netdev->phydev = NULL;
- 
- #ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS
- 	unregister_netdev(priv->netdev);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0165-staging-fsl-dpaa2-mac-defer-probe-if-no-mc-portal-is.patch b/target/linux/layerscape/patches-5.4/701-net-0165-staging-fsl-dpaa2-mac-defer-probe-if-no-mc-portal-is.patch
deleted file mode 100644
index 083e7427ad..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0165-staging-fsl-dpaa2-mac-defer-probe-if-no-mc-portal-is.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 8bfccd1f7b096d5e5a6db2cda9d5e983b4422da2 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Wed, 29 Nov 2017 17:39:05 +0200
-Subject: [PATCH] staging: fsl-dpaa2/mac: defer probe if no mc portal is found
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -494,8 +494,8 @@ static int dpaa2_mac_probe(struct fsl_mc
- 	err = fsl_mc_portal_allocate(mc_dev, FSL_MC_IO_ATOMIC_CONTEXT_PORTAL,
- 				     &mc_dev->mc_io);
- 	if (err || !mc_dev->mc_io) {
--		dev_err(dev, "fsl_mc_portal_allocate error: %d\n", err);
--		err = -ENODEV;
-+		dev_dbg(dev, "fsl_mc_portal_allocate error: %d\n", err);
-+		err = -EPROBE_DEFER;
- 		goto err_free_netdev;
- 	}
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0166-staging-fsl-dpaa2-mac-make-compatible-with-upstream-.patch b/target/linux/layerscape/patches-5.4/701-net-0166-staging-fsl-dpaa2-mac-make-compatible-with-upstream-.patch
deleted file mode 100644
index d2e5bf4544..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0166-staging-fsl-dpaa2-mac-make-compatible-with-upstream-.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-From 642686661c3324b4ae6c14f1cdbd2ea613525f09 Mon Sep 17 00:00:00 2001
-From: Razvan Stefanescu <razvan.stefanescu@nxp.com>
-Date: Fri, 13 Apr 2018 09:57:12 +0300
-Subject: [PATCH] staging: fsl-dpaa2/mac: make compatible with upstream MC bus
-
-Update the mc.h include path.
-Rename struct mc_command to struct fsl_mc_command.
-
-Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/dpmac.c | 34 +++++++++++++++++-----------------
- drivers/staging/fsl-dpaa2/mac/mac.c   |  2 +-
- 2 files changed, 18 insertions(+), 18 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/dpmac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/dpmac.c
-@@ -29,7 +29,7 @@
-  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-  * POSSIBILITY OF SUCH DAMAGE.
-  */
--#include "../../fsl-mc/include/mc.h"
-+#include <linux/fsl/mc.h>
- #include "dpmac.h"
- #include "dpmac-cmd.h"
- 
-@@ -56,7 +56,7 @@ int dpmac_open(struct fsl_mc_io *mc_io,
- 	       u16 *token)
- {
- 	struct dpmac_cmd_open *cmd_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	int err;
- 
- 	/* prepare command */
-@@ -92,7 +92,7 @@ int dpmac_close(struct fsl_mc_io *mc_io,
- 		u32 cmd_flags,
- 		u16 token)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_CLOSE, cmd_flags,
-@@ -128,7 +128,7 @@ int dpmac_create(struct fsl_mc_io *mc_io
- 		 u32 *obj_id)
- {
- 	struct dpmac_cmd_create *cmd_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	int err;
- 
- 	/* prepare command */
-@@ -170,7 +170,7 @@ int dpmac_destroy(struct fsl_mc_io *mc_i
- 		  u32 object_id)
- {
- 	struct dpmac_cmd_destroy *cmd_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_DESTROY,
-@@ -205,7 +205,7 @@ int dpmac_set_irq_enable(struct fsl_mc_i
- 			 u8 en)
- {
- 	struct dpmac_cmd_set_irq_enable *cmd_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_IRQ_ENABLE,
-@@ -237,7 +237,7 @@ int dpmac_get_irq_enable(struct fsl_mc_i
- {
- 	struct dpmac_cmd_get_irq_enable *cmd_params;
- 	struct dpmac_rsp_get_irq_enable *rsp_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	int err;
- 
- 	/* prepare command */
-@@ -282,7 +282,7 @@ int dpmac_set_irq_mask(struct fsl_mc_io
- 		       u32 mask)
- {
- 	struct dpmac_cmd_set_irq_mask *cmd_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_IRQ_MASK,
-@@ -317,7 +317,7 @@ int dpmac_get_irq_mask(struct fsl_mc_io
- {
- 	struct dpmac_cmd_get_irq_mask *cmd_params;
- 	struct dpmac_rsp_get_irq_mask *rsp_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	int err;
- 
- 	/* prepare command */
-@@ -360,7 +360,7 @@ int dpmac_get_irq_status(struct fsl_mc_i
- {
- 	struct dpmac_cmd_get_irq_status *cmd_params;
- 	struct dpmac_rsp_get_irq_status *rsp_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	int err;
- 
- 	/* prepare command */
-@@ -403,7 +403,7 @@ int dpmac_clear_irq_status(struct fsl_mc
- 			   u32 status)
- {
- 	struct dpmac_cmd_clear_irq_status *cmd_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_CLEAR_IRQ_STATUS,
-@@ -433,7 +433,7 @@ int dpmac_get_attributes(struct fsl_mc_i
- 			 struct dpmac_attr *attr)
- {
- 	struct dpmac_rsp_get_attributes *rsp_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	int err;
- 
- 	/* prepare command */
-@@ -471,7 +471,7 @@ int dpmac_get_link_cfg(struct fsl_mc_io
- 		       struct dpmac_link_cfg *cfg)
- {
- 	struct dpmac_rsp_get_link_cfg *rsp_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	int err = 0;
- 
- 	/* prepare command */
-@@ -506,7 +506,7 @@ int dpmac_set_link_state(struct fsl_mc_i
- 			 struct dpmac_link_state *link_state)
- {
- 	struct dpmac_cmd_set_link_state *cmd_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_LINK_STATE,
-@@ -539,7 +539,7 @@ int dpmac_get_counter(struct fsl_mc_io *
- {
- 	struct dpmac_cmd_get_counter *dpmac_cmd;
- 	struct dpmac_rsp_get_counter *dpmac_rsp;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	int err = 0;
- 
- 	/* prepare command */
-@@ -567,7 +567,7 @@ int dpmac_set_port_mac_addr(struct fsl_m
- 			    const u8 addr[6])
- {
- 	struct dpmac_cmd_set_port_mac_addr *dpmac_cmd;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_PORT_MAC_ADDR,
-@@ -600,7 +600,7 @@ int dpmac_get_api_version(struct fsl_mc_
- 			  u16 *minor_ver)
- {
- 	struct dpmac_rsp_get_api_version *rsp_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	int err;
- 
- 	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_API_VERSION,
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -46,7 +46,7 @@
- #include <linux/phy.h>
- #include <linux/phy_fixed.h>
- 
--#include "../../fsl-mc/include/mc.h"
-+#include <linux/fsl/mc.h>
- 
- #include "dpmac.h"
- #include "dpmac-cmd.h"
diff --git a/target/linux/layerscape/patches-5.4/701-net-0167-staging-fsl-dpaa2-mac-probe-phy-as-fixed-link-based-.patch b/target/linux/layerscape/patches-5.4/701-net-0167-staging-fsl-dpaa2-mac-probe-phy-as-fixed-link-based-.patch
deleted file mode 100644
index f46bfeec98..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0167-staging-fsl-dpaa2-mac-probe-phy-as-fixed-link-based-.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From fc7b4295a24771be99eb1afb374608562706f4d8 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Thu, 18 Oct 2018 20:02:44 +0300
-Subject: [PATCH] staging: fsl-dpaa2/mac: probe phy as fixed link based on
- dpmac properties
-
-Keep in sync the PHY type settings in DPC and Linux device tree.
-
-If the dpmac is connected to a fixed link PHY based on dpc config,
-treat it as a fixed-link device, regardless of whether the "phy-handle"
-property is present in the device tree node or not.
-
-Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -545,9 +545,11 @@ static int dpaa2_mac_probe(struct fsl_mc
- 	}
- #endif /* CONFIG_FSL_DPAA2_MAC_NETDEVS */
- 
--	/* probe the PHY as a fixed-link if there's a phy-handle defined
--	 * in the device tree
--	 */
-+	/* probe the PHY as fixed-link if the DPMAC attribute indicates so */
-+	if (priv->attr.link_type == DPMAC_LINK_TYPE_FIXED)
-+		goto probe_fixed_link;
-+
-+	/* or if there's no phy-handle defined in the device tree */
- 	phy_node = of_parse_phandle(dpmac_node, "phy-handle", 0);
- 	if (!phy_node) {
- 		goto probe_fixed_link;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0168-staging-fsl-dpaa2-mac-Fix-uninitialized-variable.patch b/target/linux/layerscape/patches-5.4/701-net-0168-staging-fsl-dpaa2-mac-Fix-uninitialized-variable.patch
deleted file mode 100644
index 6cad0a94e8..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0168-staging-fsl-dpaa2-mac-Fix-uninitialized-variable.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 8d1d6c6778c00d47eee8073bb991c6799d757c35 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Fri, 19 Oct 2018 17:00:17 +0300
-Subject: [PATCH] staging: fsl-dpaa2/mac: Fix uninitialized variable
-
-Reported by coverity.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -355,7 +355,7 @@ static irqreturn_t dpaa2_mac_irq_handler
- 	struct device *dev = (struct device *)arg;
- 	struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev);
- 	struct dpaa2_mac_priv *priv = dev_get_drvdata(dev);
--	struct dpmac_link_cfg link_cfg;
-+	struct dpmac_link_cfg link_cfg = { 0 };
- 	u32 status;
- 	int err;
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0169-staging-fsl-dpaa2-mac-read-phy-mode-from-device-tree.patch b/target/linux/layerscape/patches-5.4/701-net-0169-staging-fsl-dpaa2-mac-read-phy-mode-from-device-tree.patch
deleted file mode 100644
index 1833319da6..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0169-staging-fsl-dpaa2-mac-read-phy-mode-from-device-tree.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 781d22f6cf6aded86e80be995b5c875c61512567 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Thu, 18 Oct 2018 20:12:38 +0300
-Subject: [PATCH] staging: fsl-dpaa2/mac: read phy mode from device tree
-
-If the a dpmac node defines its phy mode in the device tree using
-the 'phy-mode' or the 'phy-connection-type' attributes this will take
-precedence over the interface mode reported by the MC in the
-dpmac attributes structure.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 10 +++++++++-
- 1 file changed, 9 insertions(+), 1 deletion(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -466,7 +466,7 @@ static int dpaa2_mac_probe(struct fsl_mc
- 	struct dpaa2_mac_priv	*priv = NULL;
- 	struct device_node	*phy_node, *dpmac_node;
- 	struct net_device	*netdev;
--	phy_interface_t		if_mode;
-+	int			if_mode;
- 	int			err = 0;
- 
- 	dev = &mc_dev->dev;
-@@ -555,6 +555,13 @@ static int dpaa2_mac_probe(struct fsl_mc
- 		goto probe_fixed_link;
- 	}
- 
-+	if_mode = of_get_phy_mode(dpmac_node);
-+	if (if_mode >= 0) {
-+		dev_dbg(dev, "\tusing if mode %s for eth_if %d\n",
-+			phy_modes(if_mode), priv->attr.eth_if);
-+		goto phy_connect;
-+	}
-+
- 	if (priv->attr.eth_if < ARRAY_SIZE(dpaa2_mac_iface_mode)) {
- 		if_mode = dpaa2_mac_iface_mode[priv->attr.eth_if];
- 		dev_dbg(dev, "\tusing if mode %s for eth_if %d\n",
-@@ -565,6 +572,7 @@ static int dpaa2_mac_probe(struct fsl_mc
- 		goto probe_fixed_link;
- 	}
- 
-+phy_connect:
- 	/* try to connect to the PHY */
- 	netdev->phydev = of_phy_connect(netdev, phy_node,
- 					&dpaa2_mac_link_changed, 0, if_mode);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0170-staging-fsl-dpaa2-mac-Add-more-PHY-modes.patch b/target/linux/layerscape/patches-5.4/701-net-0170-staging-fsl-dpaa2-mac-Add-more-PHY-modes.patch
deleted file mode 100644
index 376b508d1d..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0170-staging-fsl-dpaa2-mac-Add-more-PHY-modes.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 8b85f5295ffa083516fc496343d4328cf1deb605 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Fri, 19 Oct 2018 13:22:12 +0300
-Subject: [PATCH] staging: fsl-dpaa2/mac: Add more PHY modes
-
-Add support for CAUI, USXGMII and 1000BASE-X.
-
-Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
-Signed-off-by: Valentin Catalin Neacsu <valentin-catalin.neacsu@nxp.com>
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -76,6 +76,9 @@ static phy_interface_t dpaa2_mac_iface_m
- 	PHY_INTERFACE_MODE_QSGMII,	/* DPMAC_ETH_IF_QSGMII */
- 	PHY_INTERFACE_MODE_XGMII,	/* DPMAC_ETH_IF_XAUI */
- 	PHY_INTERFACE_MODE_XGMII,	/* DPMAC_ETH_IF_XFI */
-+	PHY_INTERFACE_MODE_XGMII,        /* DPMAC_ETH_IF_CAUI */
-+	PHY_INTERFACE_MODE_XGMII,       /* DPMAC_ETH_IF_1000BASEX */
-+	PHY_INTERFACE_MODE_XGMII,       /* DPMAC_ETH_IF_USXGMII */
- };
- 
- static void dpaa2_mac_link_changed(struct net_device *netdev)
diff --git a/target/linux/layerscape/patches-5.4/701-net-0171-staging-fsl-dpaa2-mac-Check-DPMAC-version.patch b/target/linux/layerscape/patches-5.4/701-net-0171-staging-fsl-dpaa2-mac-Check-DPMAC-version.patch
deleted file mode 100644
index ca3506b0db..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0171-staging-fsl-dpaa2-mac-Check-DPMAC-version.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From 2dc96021dc08d24eed822f66cb8fb5a454fee236 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Fri, 19 Oct 2018 16:20:07 +0300
-Subject: [PATCH] staging: fsl-dpaa2/mac: Check DPMAC version
-
-Read the current API version exposed by the DPMAC object.
-Add a check at probe time to make sure it is compatible with
-the set of MC commands we intend to use on it.
-Also, print the version number through ethtool driver info.
-
-Signed-off-by: Catalin Neacsu <valentin-catalin.neacsu@nxp.com>
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 39 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 39 insertions(+)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -56,6 +56,8 @@ struct dpaa2_mac_priv {
- 	struct fsl_mc_device		*mc_dev;
- 	struct dpmac_attr		attr;
- 	struct dpmac_link_state		old_state;
-+	u16				dpmac_ver_major;
-+	u16				dpmac_ver_minor;
- };
- 
- /* TODO: fix the 10G modes, mapping can't be right:
-@@ -81,6 +83,14 @@ static phy_interface_t dpaa2_mac_iface_m
- 	PHY_INTERFACE_MODE_XGMII,       /* DPMAC_ETH_IF_USXGMII */
- };
- 
-+static int cmp_dpmac_ver(struct dpaa2_mac_priv *priv,
-+			 u16 ver_major, u16 ver_minor)
-+{
-+	if (priv->dpmac_ver_major == ver_major)
-+		return priv->dpmac_ver_minor - ver_minor;
-+	return priv->dpmac_ver_major - ver_major;
-+}
-+
- static void dpaa2_mac_link_changed(struct net_device *netdev)
- {
- 	struct phy_device	*phydev;
-@@ -154,6 +164,18 @@ static netdev_tx_t dpaa2_mac_drop_frame(
- 	return NETDEV_TX_OK;
- }
- 
-+static void dpaa2_mac_get_drvinfo(struct net_device *net_dev,
-+				  struct ethtool_drvinfo *drvinfo)
-+{
-+	struct dpaa2_mac_priv *priv = netdev_priv(net_dev);
-+
-+	strlcpy(drvinfo->driver, KBUILD_MODNAME, sizeof(drvinfo->driver));
-+	snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
-+		 "%u.%u", priv->dpmac_ver_major, priv->dpmac_ver_minor);
-+	strlcpy(drvinfo->bus_info, dev_name(net_dev->dev.parent->parent),
-+		sizeof(drvinfo->bus_info));
-+}
-+
- static int dpaa2_mac_get_link_ksettings(struct net_device *netdev,
- 					struct ethtool_link_ksettings *ks)
- {
-@@ -323,6 +345,7 @@ static const struct net_device_ops dpaa2
- };
- 
- static const struct ethtool_ops dpaa2_mac_ethtool_ops = {
-+	.get_drvinfo		= &dpaa2_mac_get_drvinfo,
- 	.get_link_ksettings	= &dpaa2_mac_get_link_ksettings,
- 	.set_link_ksettings	= &dpaa2_mac_set_link_ksettings,
- 	.get_strings		= &dpaa2_mac_get_strings,
-@@ -510,6 +533,21 @@ static int dpaa2_mac_probe(struct fsl_mc
- 		goto err_free_mcp;
- 	}
- 
-+	err = dpmac_get_api_version(mc_dev->mc_io, 0, &priv->dpmac_ver_major,
-+				    &priv->dpmac_ver_minor);
-+	if (err) {
-+		dev_err(dev, "dpmac_get_api_version failed\n");
-+		goto err_version;
-+	}
-+
-+	if (cmp_dpmac_ver(priv, DPMAC_VER_MAJOR, DPMAC_VER_MINOR) < 0) {
-+		dev_err(dev, "DPMAC version %u.%u lower than supported %u.%u\n",
-+			priv->dpmac_ver_major, priv->dpmac_ver_minor,
-+			DPMAC_VER_MAJOR, DPMAC_VER_MINOR);
-+		err = -ENOTSUPP;
-+		goto err_version;
-+	}
-+
- 	err = dpmac_get_attributes(mc_dev->mc_io, 0,
- 				   mc_dev->mc_handle, &priv->attr);
- 	if (err) {
-@@ -622,6 +660,7 @@ err_no_phy:
- err_free_irq:
- #endif
- 	teardown_irqs(mc_dev);
-+err_version:
- err_close:
- 	dpmac_close(mc_dev->mc_io, 0, mc_dev->mc_handle);
- err_free_mcp:
diff --git a/target/linux/layerscape/patches-5.4/701-net-0172-staging-fsl-dpaa2-mac-Fix-dpmac_set_link_state-comma.patch b/target/linux/layerscape/patches-5.4/701-net-0172-staging-fsl-dpaa2-mac-Fix-dpmac_set_link_state-comma.patch
deleted file mode 100644
index 867dbf1af0..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0172-staging-fsl-dpaa2-mac-Fix-dpmac_set_link_state-comma.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From c27bca038be891762760c5e4b3a79368c663b47b Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Fri, 19 Oct 2018 17:45:50 +0300
-Subject: [PATCH] staging: fsl-dpaa2/mac: Fix dpmac_set_link_state() command
-
-The instruction writing link state value in the MC command
-structure wasn't correct, but it happened to work nonetheless.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/dpmac.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/dpmac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/dpmac.c
-@@ -515,7 +515,7 @@ int dpmac_set_link_state(struct fsl_mc_i
- 	cmd_params = (struct dpmac_cmd_set_link_state *)cmd.params;
- 	cmd_params->options = cpu_to_le64(link_state->options);
- 	cmd_params->rate = cpu_to_le32(link_state->rate);
--	cmd_params->up = dpmac_get_field(link_state->up, STATE);
-+	dpmac_set_field(cmd_params->up, STATE, link_state->up);
- 
- 	/* send command to mc*/
- 	return mc_send_command(mc_io, &cmd);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0173-staging-fsl-dpaa2-mac-Add-support-for-new-link-state.patch b/target/linux/layerscape/patches-5.4/701-net-0173-staging-fsl-dpaa2-mac-Add-support-for-new-link-state.patch
deleted file mode 100644
index 601a4bf6aa..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0173-staging-fsl-dpaa2-mac-Add-support-for-new-link-state.patch
+++ /dev/null
@@ -1,235 +0,0 @@
-From d84bd24a4d6e5b05f7eb1a544dfd0bd98c7f5bb1 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Wed, 17 Oct 2018 20:14:24 +0300
-Subject: [PATCH] staging: fsl-dpaa2/mac: Add support for new link state APIs
-
-Add v2 of dpmac_set_link_state() and dpmac_get_link_cfg() commands.
-The new version allows setting & getting advertised and supported
-link options.
-
-Signed-off-by: Valentin Catalin Neacsu <valentin-catalin.neacsu@nxp.com>
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/dpmac-cmd.h | 24 +++++++++++
- drivers/staging/fsl-dpaa2/mac/dpmac.c     | 70 +++++++++++++++++++++++++++++++
- drivers/staging/fsl-dpaa2/mac/dpmac.h     | 32 ++++++++++++++
- 3 files changed, 126 insertions(+)
-
---- a/drivers/staging/fsl-dpaa2/mac/dpmac-cmd.h
-+++ b/drivers/staging/fsl-dpaa2/mac/dpmac-cmd.h
-@@ -36,9 +36,11 @@
- #define DPMAC_VER_MAJOR				4
- #define DPMAC_VER_MINOR				2
- #define DPMAC_CMD_BASE_VERSION			1
-+#define DPMAC_CMD_2ND_VERSION			2
- #define DPMAC_CMD_ID_OFFSET			4
- 
- #define DPMAC_CMD(id)	(((id) << DPMAC_CMD_ID_OFFSET) | DPMAC_CMD_BASE_VERSION)
-+#define DPMAC_CMD_V2(id) (((id) << DPMAC_CMD_ID_OFFSET) | DPMAC_CMD_2ND_VERSION)
- 
- /* Command IDs */
- #define DPMAC_CMDID_CLOSE		DPMAC_CMD(0x800)
-@@ -58,7 +60,9 @@
- #define DPMAC_CMDID_CLEAR_IRQ_STATUS	DPMAC_CMD(0x017)
- 
- #define DPMAC_CMDID_GET_LINK_CFG	DPMAC_CMD(0x0c2)
-+#define DPMAC_CMDID_GET_LINK_CFG_V2	DPMAC_CMD_V2(0x0c2)
- #define DPMAC_CMDID_SET_LINK_STATE	DPMAC_CMD(0x0c3)
-+#define DPMAC_CMDID_SET_LINK_STATE_V2	DPMAC_CMD_V2(0x0c3)
- #define DPMAC_CMDID_GET_COUNTER		DPMAC_CMD(0x0c4)
- 
- #define DPMAC_CMDID_SET_PORT_MAC_ADDR	DPMAC_CMD(0x0c5)
-@@ -139,8 +143,17 @@ struct dpmac_rsp_get_link_cfg {
- 	u32 rate;
- };
- 
-+struct dpmac_rsp_get_link_cfg_v2 {
-+	u64 options;
-+	u32 rate;
-+	u32 pad;
-+	u64 advertising;
-+};
-+
- #define DPMAC_STATE_SIZE	1
- #define DPMAC_STATE_SHIFT	0
-+#define DPMAC_STATE_VALID_SIZE	1
-+#define DPMAC_STATE_VALID_SHIFT	1
- 
- struct dpmac_cmd_set_link_state {
- 	u64 options;
-@@ -150,6 +163,17 @@ struct dpmac_cmd_set_link_state {
- 	u8 up;
- };
- 
-+struct dpmac_cmd_set_link_state_v2 {
-+	u64 options;
-+	u32 rate;
-+	u32 pad0;
-+	/* from lsb: up:1, state_valid:1 */
-+	u8 state;
-+	u8 pad1[7];
-+	u64 supported;
-+	u64 advertising;
-+};
-+
- struct dpmac_cmd_get_counter {
- 	u8 type;
- };
---- a/drivers/staging/fsl-dpaa2/mac/dpmac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/dpmac.c
-@@ -492,6 +492,42 @@ int dpmac_get_link_cfg(struct fsl_mc_io
- }
- 
- /**
-+ * dpmac_get_link_cfg_v2() - Get Ethernet link configuration
-+ * @mc_io:      Pointer to opaque I/O object
-+ * @cmd_flags:  Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:      Token of DPMAC object
-+ * @cfg:        Returned structure with the link configuration
-+ *
-+ * Return:      '0' on Success; Error code otherwise.
-+ */
-+int dpmac_get_link_cfg_v2(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  struct dpmac_link_cfg *cfg)
-+{
-+	struct dpmac_rsp_get_link_cfg_v2 *rsp_params;
-+	struct fsl_mc_command cmd = { 0 };
-+	int err = 0;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_LINK_CFG_V2,
-+					  cmd_flags,
-+					  token);
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	rsp_params = (struct dpmac_rsp_get_link_cfg_v2 *)cmd.params;
-+	cfg->options = le64_to_cpu(rsp_params->options);
-+	cfg->rate = le32_to_cpu(rsp_params->rate);
-+	cfg->advertising = le64_to_cpu(rsp_params->advertising);
-+
-+	return 0;
-+}
-+
-+/**
-  * dpmac_set_link_state() - Set the Ethernet link status
-  * @mc_io:	Pointer to opaque I/O object
-  * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-@@ -519,6 +555,40 @@ int dpmac_set_link_state(struct fsl_mc_i
- 
- 	/* send command to mc*/
- 	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpmac_set_link_state_v2() - Set the Ethernet link status
-+ * @mc_io:      Pointer to opaque I/O object
-+ * @cmd_flags:  Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:      Token of DPMAC object
-+ * @link_state: Link state configuration
-+ *
-+ * Return:      '0' on Success; Error code otherwise.
-+ */
-+int dpmac_set_link_state_v2(struct fsl_mc_io *mc_io,
-+			    u32 cmd_flags,
-+			    u16 token,
-+			    struct dpmac_link_state *link_state)
-+{
-+	struct dpmac_cmd_set_link_state_v2 *cmd_params;
-+	struct fsl_mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_LINK_STATE_V2,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpmac_cmd_set_link_state_v2 *)cmd.params;
-+	cmd_params->options = cpu_to_le64(link_state->options);
-+	cmd_params->rate = cpu_to_le32(link_state->rate);
-+	dpmac_set_field(cmd_params->state, STATE, link_state->up);
-+	dpmac_set_field(cmd_params->state, STATE_VALID,
-+			link_state->state_valid);
-+	cmd_params->supported = cpu_to_le64(link_state->supported);
-+	cmd_params->advertising = cpu_to_le64(link_state->advertising);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
- }
- 
- /**
---- a/drivers/staging/fsl-dpaa2/mac/dpmac.h
-+++ b/drivers/staging/fsl-dpaa2/mac/dpmac.h
-@@ -202,13 +202,29 @@ int dpmac_get_attributes(struct fsl_mc_i
- #define DPMAC_LINK_OPT_ASYM_PAUSE	0x0000000000000008ULL
- 
- /**
-+ * Advertised link speeds
-+ */
-+#define DPMAC_ADVERTISED_10BASET_FULL		0x0000000000000001ULL
-+#define DPMAC_ADVERTISED_100BASET_FULL		0x0000000000000002ULL
-+#define DPMAC_ADVERTISED_1000BASET_FULL		0x0000000000000004ULL
-+#define DPMAC_ADVERTISED_10000BASET_FULL	0x0000000000000010ULL
-+#define DPMAC_ADVERTISED_2500BASEX_FULL		0x0000000000000020ULL
-+
-+/**
-+ * Advertise auto-negotiation enable
-+ */
-+#define DPMAC_ADVERTISED_AUTONEG		0x0000000000000008ULL
-+
-+/**
-  * struct dpmac_link_cfg - Structure representing DPMAC link configuration
-  * @rate: Link's rate - in Mbps
-  * @options: Enable/Disable DPMAC link cfg features (bitmap)
-+ * @advertising: Speeds that are advertised for autoneg (bitmap)
-  */
- struct dpmac_link_cfg {
- 	u32 rate;
- 	u64 options;
-+	u64 advertising;
- };
- 
- int dpmac_get_link_cfg(struct fsl_mc_io *mc_io,
-@@ -216,16 +232,27 @@ int dpmac_get_link_cfg(struct fsl_mc_io
- 		       u16 token,
- 		       struct dpmac_link_cfg *cfg);
- 
-+int dpmac_get_link_cfg_v2(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  struct dpmac_link_cfg *cfg);
-+
- /**
-  * struct dpmac_link_state - DPMAC link configuration request
-  * @rate: Rate in Mbps
-  * @options: Enable/Disable DPMAC link cfg features (bitmap)
-  * @up: Link state
-+ * @state_valid: Ignore/Update the state of the link
-+ * @supported: Speeds capability of the phy (bitmap)
-+ * @advertising: Speeds that are advertised for autoneg (bitmap)
-  */
- struct dpmac_link_state {
- 	u32 rate;
- 	u64 options;
- 	int up;
-+	int state_valid;
-+	u64 supported;
-+	u64 advertising;
- };
- 
- int dpmac_set_link_state(struct fsl_mc_io *mc_io,
-@@ -233,6 +260,11 @@ int dpmac_set_link_state(struct fsl_mc_i
- 			 u16 token,
- 			 struct dpmac_link_state *link_state);
- 
-+int dpmac_set_link_state_v2(struct fsl_mc_io *mc_io,
-+			    u32 cmd_flags,
-+			    u16 token,
-+			    struct dpmac_link_state *link_state);
-+
- /**
-  * enum dpmac_counter - DPMAC counter types
-  * @DPMAC_CNT_ING_FRAME_64: counts 64-bytes frames, good or bad.
diff --git a/target/linux/layerscape/patches-5.4/701-net-0174-staging-fsl-dpaa2-mac-Add-autoneg-support.patch b/target/linux/layerscape/patches-5.4/701-net-0174-staging-fsl-dpaa2-mac-Add-autoneg-support.patch
deleted file mode 100644
index fb296c55e2..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0174-staging-fsl-dpaa2-mac-Add-autoneg-support.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-From 52ab0053f3f8ab374c48630dd03e44fec8138113 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Thu, 18 Oct 2018 18:59:41 +0300
-Subject: [PATCH] staging: fsl-dpaa2/mac: Add autoneg support
-
-For MC versions that support it, use the new DPMAC link APIs, which
-allow setting/getting of advertised and supported link modes.
-
-A mapping between DPMAC link modes and phydev ones is created to
-help converting from one to the other.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Signed-off-by: Valentin Catalin Neacsu <valentin-catalin.neacsu@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 78 +++++++++++++++++++++++++++++++------
- 1 file changed, 67 insertions(+), 11 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -1,4 +1,5 @@
- /* Copyright 2015 Freescale Semiconductor Inc.
-+ * Copyright 2018 NXP
-  *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted provided that the following conditions are met:
-@@ -91,6 +92,43 @@ static int cmp_dpmac_ver(struct dpaa2_ma
- 	return priv->dpmac_ver_major - ver_major;
- }
- 
-+#define DPMAC_LINK_AUTONEG_VER_MAJOR		4
-+#define DPMAC_LINK_AUTONEG_VER_MINOR		3
-+
-+struct dpaa2_mac_link_mode_map {
-+	u64 dpmac_lm;
-+	u64 ethtool_lm;
-+};
-+
-+static const struct dpaa2_mac_link_mode_map dpaa2_mac_lm_map[] = {
-+	{DPMAC_ADVERTISED_10BASET_FULL, ETHTOOL_LINK_MODE_10baseT_Full_BIT},
-+	{DPMAC_ADVERTISED_100BASET_FULL, ETHTOOL_LINK_MODE_100baseT_Full_BIT},
-+	{DPMAC_ADVERTISED_1000BASET_FULL, ETHTOOL_LINK_MODE_1000baseT_Full_BIT},
-+	{DPMAC_ADVERTISED_10000BASET_FULL, ETHTOOL_LINK_MODE_10000baseT_Full_BIT},
-+	{DPMAC_ADVERTISED_2500BASEX_FULL, ETHTOOL_LINK_MODE_2500baseT_Full_BIT},
-+	{DPMAC_ADVERTISED_AUTONEG, ETHTOOL_LINK_MODE_Autoneg_BIT},
-+};
-+
-+static void link_mode_dpmac2phydev(u64 dpmac_lm, unsigned long *phydev_lm)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(dpaa2_mac_lm_map); i++) {
-+		if (dpmac_lm & dpaa2_mac_lm_map[i].dpmac_lm)
-+			linkmode_set_bit(dpaa2_mac_lm_map[i].ethtool_lm, phydev_lm);
-+	}
-+}
-+
-+static void link_mode_phydev2dpmac(unsigned long *phydev_lm, u64 *dpni_lm)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(dpaa2_mac_lm_map); i++) {
-+		if (linkmode_test_bit(dpaa2_mac_lm_map[i].ethtool_lm, phydev_lm))
-+			*dpni_lm |= dpaa2_mac_lm_map[i].dpmac_lm;
-+	}
-+}
-+
- static void dpaa2_mac_link_changed(struct net_device *netdev)
- {
- 	struct phy_device	*phydev;
-@@ -122,11 +160,18 @@ static void dpaa2_mac_link_changed(struc
- 		phy_print_status(phydev);
- 	}
- 
--	/* We must interrogate MC at all times, because we don't know
--	 * when and whether a potential DPNI may have read the link state.
--	 */
--	err = dpmac_set_link_state(priv->mc_dev->mc_io, 0,
--				   priv->mc_dev->mc_handle, &state);
-+	if (cmp_dpmac_ver(priv, DPMAC_LINK_AUTONEG_VER_MAJOR,
-+			  DPMAC_LINK_AUTONEG_VER_MINOR) < 0) {
-+		err = dpmac_set_link_state(priv->mc_dev->mc_io, 0,
-+					   priv->mc_dev->mc_handle, &state);
-+	} else {
-+		link_mode_phydev2dpmac(phydev->supported, &state.supported);
-+		link_mode_phydev2dpmac(phydev->advertising, &state.advertising);
-+		state.state_valid = 1;
-+
-+		err = dpmac_set_link_state_v2(priv->mc_dev->mc_io, 0,
-+					      priv->mc_dev->mc_handle, &state);
-+	}
- 	if (unlikely(err))
- 		dev_err(&priv->mc_dev->dev, "dpmac_set_link_state: %d\n", err);
- }
-@@ -365,12 +410,17 @@ static void configure_link(struct dpaa2_
- 	phydev->speed = cfg->rate;
- 	phydev->duplex  = !!(cfg->options & DPMAC_LINK_OPT_HALF_DUPLEX);
- 
-+	if (cfg->advertising != 0) {
-+		linkmode_zero(phydev->advertising);
-+		link_mode_dpmac2phydev(cfg->advertising, phydev->advertising);
-+	}
-+
- 	if (cfg->options & DPMAC_LINK_OPT_AUTONEG) {
--		phydev->autoneg = 1;
--		phydev->advertising |= ADVERTISED_Autoneg;
-+		phydev->autoneg = AUTONEG_ENABLE;
-+		linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->advertising);
- 	} else {
--		phydev->autoneg = 0;
--		phydev->advertising &= ~ADVERTISED_Autoneg;
-+		phydev->autoneg = AUTONEG_DISABLE;
-+		linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->advertising);
- 	}
- 
- 	phy_start_aneg(phydev);
-@@ -392,8 +442,14 @@ static irqreturn_t dpaa2_mac_irq_handler
- 
- 	/* DPNI-initiated link configuration; 'ifconfig up' also calls this */
- 	if (status & DPMAC_IRQ_EVENT_LINK_CFG_REQ) {
--		err = dpmac_get_link_cfg(mc_dev->mc_io, 0, mc_dev->mc_handle,
--					 &link_cfg);
-+		if (cmp_dpmac_ver(priv, DPMAC_LINK_AUTONEG_VER_MAJOR,
-+				  DPMAC_LINK_AUTONEG_VER_MINOR) < 0)
-+			err = dpmac_get_link_cfg(mc_dev->mc_io, 0,
-+						 mc_dev->mc_handle, &link_cfg);
-+		else
-+			err = dpmac_get_link_cfg_v2(mc_dev->mc_io, 0,
-+						    mc_dev->mc_handle,
-+						    &link_cfg);
- 		if (unlikely(err))
- 			goto out;
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0175-staging-fsl-dpaa2-mac-connect-to-the-fixed-phy.patch b/target/linux/layerscape/patches-5.4/701-net-0175-staging-fsl-dpaa2-mac-connect-to-the-fixed-phy.patch
deleted file mode 100644
index 8d0e122b12..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0175-staging-fsl-dpaa2-mac-connect-to-the-fixed-phy.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 69e35d8266713d36ad31b04d9b7cb32913d243c0 Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Tue, 27 Nov 2018 15:23:47 +0200
-Subject: [PATCH] staging: fsl-dpaa2/mac: connect to the fixed phy
-
-This patch is formed from 2 parts:
-   - first it moves the code that determines the if_mode to the
-     beginning so that it's used for both fixed link and phy mode.
-   - secondly, when in fixed link mode, call the phy_connect_phy
-     function as needed.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 39 ++++++++++++++++++++++++-------------
- 1 file changed, 25 insertions(+), 14 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -642,21 +642,12 @@ static int dpaa2_mac_probe(struct fsl_mc
- 	}
- #endif /* CONFIG_FSL_DPAA2_MAC_NETDEVS */
- 
--	/* probe the PHY as fixed-link if the DPMAC attribute indicates so */
--	if (priv->attr.link_type == DPMAC_LINK_TYPE_FIXED)
--		goto probe_fixed_link;
--
--	/* or if there's no phy-handle defined in the device tree */
--	phy_node = of_parse_phandle(dpmac_node, "phy-handle", 0);
--	if (!phy_node) {
--		goto probe_fixed_link;
--	}
--
-+	/* get the interface mode from the dpmac of node or from the MC attributes */
- 	if_mode = of_get_phy_mode(dpmac_node);
- 	if (if_mode >= 0) {
- 		dev_dbg(dev, "\tusing if mode %s for eth_if %d\n",
- 			phy_modes(if_mode), priv->attr.eth_if);
--		goto phy_connect;
-+		goto link_type;
- 	}
- 
- 	if (priv->attr.eth_if < ARRAY_SIZE(dpaa2_mac_iface_mode)) {
-@@ -664,12 +655,23 @@ static int dpaa2_mac_probe(struct fsl_mc
- 		dev_dbg(dev, "\tusing if mode %s for eth_if %d\n",
- 			phy_modes(if_mode), priv->attr.eth_if);
- 	} else {
--		dev_warn(dev, "Unexpected interface mode %d, will probe as fixed link\n",
--			 priv->attr.eth_if);
-+		dev_err(dev, "Unexpected interface mode %d\n",
-+			priv->attr.eth_if);
-+		err = -EINVAL;
-+		goto err_no_if_mode;
-+	}
-+
-+link_type:
-+	/* probe the PHY as fixed-link if the DPMAC attribute indicates so */
-+	if (priv->attr.link_type == DPMAC_LINK_TYPE_FIXED)
-+		goto probe_fixed_link;
-+
-+	/* or if there's no phy-handle defined in the device tree */
-+	phy_node = of_parse_phandle(dpmac_node, "phy-handle", 0);
-+	if (!phy_node) {
- 		goto probe_fixed_link;
- 	}
- 
--phy_connect:
- 	/* try to connect to the PHY */
- 	netdev->phydev = of_phy_connect(netdev, phy_node,
- 					&dpaa2_mac_link_changed, 0, if_mode);
-@@ -702,6 +704,14 @@ probe_fixed_link:
- 			err = -EFAULT;
- 			goto err_no_phy;
- 		}
-+
-+		err = phy_connect_direct(netdev, netdev->phydev,
-+					 &dpaa2_mac_link_changed, if_mode);
-+		if (err) {
-+			dev_err(dev, "error trying to connect to PHY\n");
-+			goto err_no_phy;
-+		}
-+
- 		dev_info(dev, "Registered fixed PHY.\n");
- 	}
- 
-@@ -709,6 +719,7 @@ probe_fixed_link:
- 
- 	return 0;
- 
-+err_no_if_mode:
- err_defer:
- err_no_phy:
- #ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS
diff --git a/target/linux/layerscape/patches-5.4/701-net-0176-staging-fsl-dpaa2-mac-add-pause-frames-support-for-m.patch b/target/linux/layerscape/patches-5.4/701-net-0176-staging-fsl-dpaa2-mac-add-pause-frames-support-for-m.patch
deleted file mode 100644
index 24c978b5cc..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0176-staging-fsl-dpaa2-mac-add-pause-frames-support-for-m.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 182bf3ddfc0168ca2df3da477b143bab17543b65 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Wed, 13 Mar 2019 19:12:47 +0200
-Subject: [PATCH] staging: fsl-dpaa2/mac: add pause frames support for managed
- phys
-
-Read the configured dpmac options and depending on the supported
-features set the according advertising bit.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -148,6 +148,11 @@ static void dpaa2_mac_link_changed(struc
- 		if (phydev->autoneg)
- 			state.options |= DPMAC_LINK_OPT_AUTONEG;
- 
-+		if (phydev->pause && linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->advertising))
-+			state.options |= DPMAC_LINK_OPT_PAUSE;
-+		if (phydev->pause && linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->advertising))
-+			state.options |= DPMAC_LINK_OPT_ASYM_PAUSE;
-+
- 		netif_carrier_on(netdev);
- 	} else {
- 		netif_carrier_off(netdev);
-@@ -415,6 +420,20 @@ static void configure_link(struct dpaa2_
- 		link_mode_dpmac2phydev(cfg->advertising, phydev->advertising);
- 	}
- 
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported)) {
-+		if (cfg->options & DPMAC_LINK_OPT_PAUSE)
-+			linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->advertising);
-+		else
-+			linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->advertising);
-+	}
-+
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported)) {
-+		if (cfg->options & DPMAC_LINK_OPT_ASYM_PAUSE)
-+			linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->advertising);
-+		else
-+			linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->advertising);
-+	}
-+
- 	if (cfg->options & DPMAC_LINK_OPT_AUTONEG) {
- 		phydev->autoneg = AUTONEG_ENABLE;
- 		linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->advertising);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0177-staging-dpaa2-mac-Update-interface-mode-array.patch b/target/linux/layerscape/patches-5.4/701-net-0177-staging-dpaa2-mac-Update-interface-mode-array.patch
deleted file mode 100644
index 1b1d6a7a15..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0177-staging-dpaa2-mac-Update-interface-mode-array.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 3548421e09d714c23eb74ed7302221df8274d356 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Wed, 24 Jul 2019 20:26:06 +0300
-Subject: [PATCH] staging: dpaa2-mac: Update interface mode array
-
-We used to set PHY_INTERFACE_MODE_XGMII as a placeholder
-for interface modes listed by MC but not defined in the
-linux kernel. Some of these modes have been added in upstream,
-so update the interface mode array to better match actual PHYs.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -77,11 +77,11 @@ static phy_interface_t dpaa2_mac_iface_m
- 	PHY_INTERFACE_MODE_RGMII,	/* DPMAC_ETH_IF_RGMII */
- 	PHY_INTERFACE_MODE_SGMII,	/* DPMAC_ETH_IF_SGMII */
- 	PHY_INTERFACE_MODE_QSGMII,	/* DPMAC_ETH_IF_QSGMII */
--	PHY_INTERFACE_MODE_XGMII,	/* DPMAC_ETH_IF_XAUI */
-+	PHY_INTERFACE_MODE_XAUI,	/* DPMAC_ETH_IF_XAUI */
- 	PHY_INTERFACE_MODE_XGMII,	/* DPMAC_ETH_IF_XFI */
- 	PHY_INTERFACE_MODE_XGMII,        /* DPMAC_ETH_IF_CAUI */
--	PHY_INTERFACE_MODE_XGMII,       /* DPMAC_ETH_IF_1000BASEX */
--	PHY_INTERFACE_MODE_XGMII,       /* DPMAC_ETH_IF_USXGMII */
-+	PHY_INTERFACE_MODE_1000BASEX,   /* DPMAC_ETH_IF_1000BASEX */
-+	PHY_INTERFACE_MODE_USXGMII,     /* DPMAC_ETH_IF_USXGMII */
- };
- 
- static int cmp_dpmac_ver(struct dpaa2_mac_priv *priv,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0178-staging-dpaa2-mac-add-link-up-down-events-for-dpmac.patch b/target/linux/layerscape/patches-5.4/701-net-0178-staging-dpaa2-mac-add-link-up-down-events-for-dpmac.patch
deleted file mode 100644
index 9fbd8c79ab..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0178-staging-dpaa2-mac-add-link-up-down-events-for-dpmac.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 3b07b109823a593f43e794cbf44ba3a84ceefbdb Mon Sep 17 00:00:00 2001
-From: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
-Date: Fri, 23 Aug 2019 18:02:27 +0300
-Subject: [PATCH] staging: dpaa2-mac: add link up/down events for dpmac
-
-Fix a limitation that affects the networking behavior when the user
-issues ifconfig down/up on a DPNI and the link remains down.
-The actual problem was that the mac driver was not aware of the
-dpni link change event. Now, the event is sent by firmware and
-phylib state machine is manipulated conveniently.
-
-Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/dpmac.h |  5 +++++
- drivers/staging/fsl-dpaa2/mac/mac.c   | 15 ++++++++++++---
- 2 files changed, 17 insertions(+), 3 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/dpmac.h
-+++ b/drivers/staging/fsl-dpaa2/mac/dpmac.h
-@@ -124,6 +124,11 @@ int dpmac_destroy(struct fsl_mc_io *mc_i
-  * IRQ event - Indicates that the link state changed
-  */
- #define DPMAC_IRQ_EVENT_LINK_CHANGED		0x00000002
-+/**
-+ * IRQ event - Indicate if the phy needs to suspend or resume
-+ */
-+#define DPMAC_IRQ_EVENT_LINK_UP_REQ		0x00000004
-+#define DPMAC_IRQ_EVENT_LINK_DOWN_REQ		0x00000008
- 
- int dpmac_set_irq_enable(struct fsl_mc_io *mc_io,
- 			 u32 cmd_flags,
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -181,6 +181,7 @@ static void dpaa2_mac_link_changed(struc
- 		dev_err(&priv->mc_dev->dev, "dpmac_set_link_state: %d\n", err);
- }
- 
-+#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS
- static int dpaa2_mac_open(struct net_device *netdev)
- {
- 	/* start PHY state machine */
-@@ -188,6 +189,7 @@ static int dpaa2_mac_open(struct net_dev
- 
- 	return 0;
- }
-+#endif
- 
- static int dpaa2_mac_stop(struct net_device *netdev)
- {
-@@ -450,6 +452,7 @@ static irqreturn_t dpaa2_mac_irq_handler
- 	struct device *dev = (struct device *)arg;
- 	struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev);
- 	struct dpaa2_mac_priv *priv = dev_get_drvdata(dev);
-+	struct net_device *ndev = priv->netdev;
- 	struct dpmac_link_cfg link_cfg = { 0 };
- 	u32 status;
- 	int err;
-@@ -475,6 +478,12 @@ static irqreturn_t dpaa2_mac_irq_handler
- 		configure_link(priv, &link_cfg);
- 	}
- 
-+	if (status & DPMAC_IRQ_EVENT_LINK_UP_REQ)
-+		phy_start(ndev->phydev);
-+
-+	if (status & DPMAC_IRQ_EVENT_LINK_DOWN_REQ)
-+		phy_stop(ndev->phydev);
-+
- out:
- 	dpmac_clear_irq_status(mc_dev->mc_io, 0, mc_dev->mc_handle,
- 			       DPMAC_IRQ_INDEX, status);
-@@ -505,7 +514,9 @@ static int setup_irqs(struct fsl_mc_devi
- 	}
- 
- 	err = dpmac_set_irq_mask(mc_dev->mc_io, 0, mc_dev->mc_handle,
--				 DPMAC_IRQ_INDEX, DPMAC_IRQ_EVENT_LINK_CFG_REQ);
-+				 DPMAC_IRQ_INDEX, DPMAC_IRQ_EVENT_LINK_CFG_REQ |
-+				 DPMAC_IRQ_EVENT_LINK_UP_REQ |
-+				 DPMAC_IRQ_EVENT_LINK_DOWN_REQ);
- 	if (err) {
- 		dev_err(&mc_dev->dev, "dpmac_set_irq_mask err %d\n", err);
- 		goto free_irq;
-@@ -734,8 +745,6 @@ probe_fixed_link:
- 		dev_info(dev, "Registered fixed PHY.\n");
- 	}
- 
--	dpaa2_mac_open(netdev);
--
- 	return 0;
- 
- err_no_if_mode:
diff --git a/target/linux/layerscape/patches-5.4/701-net-0179-staging-dpaa2-evb-Add-Edge-Virtual-Bridge-driver.patch b/target/linux/layerscape/patches-5.4/701-net-0179-staging-dpaa2-evb-Add-Edge-Virtual-Bridge-driver.patch
deleted file mode 100644
index 51d10b370f..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0179-staging-dpaa2-evb-Add-Edge-Virtual-Bridge-driver.patch
+++ /dev/null
@@ -1,3182 +0,0 @@
-From 5d027b67938155d14814437c89fc535dff94cc10 Mon Sep 17 00:00:00 2001
-From: Razvan Stefanescu <razvan.stefanescu@nxp.com>
-Date: Thu, 13 Apr 2017 16:03:37 +0300
-Subject: [PATCH] staging: dpaa2-evb: Add Edge Virtual Bridge driver
-
-This contains the following patches migrated from sdk-v2.0.x branch:
-
-dpaa2-evb: Added Edge Virtual Bridge driver
-dpaa2-evb: Add VLAN_8021Q dependency
-dpaa2-evb: Update dpdmux binary interface to 5.0
-dpaa2-evb: Add support to set max frame length.
-dpaa2-evb: Fix interrupt handling
-dpaa2-evb: Add object version check
-staging: dpaa2-evb: update dpdmux command ids set for MC v10.x
-dpaa2-evb: replace uintX_t types by kernel preferred kernel uX types
-dpaa2-evb: uprev binary interface to v6.0
-dpaa2-evb: move comments from declaration to definition
-dpaa2-evb: delete extraneous tabs
-dpaa2-evb: align function parameters
-dpaa2-evb: convert mc command build/parse to use C structs
-
-Initial patches have been signed-off by:
-Alex Marginean <alexandru.marginean@freescale.com>
-J. German Rivera <German.Rivera@freescale.com>
-Bogdan Hamciuc <bogdan.hamciuc@freescale.com>
-Mihaela Panescu <mihaela.panescu@freescale.com>
-Catalin Horghidan <catalin.horghidan@nxp.com>
-Ioana Ciornei <ioana.ciornei@nxp.com>
-Stuart Yoder <stuart.yoder@freescale.com>
-
-Updated FLIBs to the latest available for MC 10.x and fixed check-patch
-warnings. Updated maintainer to myself and removed the DPAA2 Ethernet
-dependency.
-
-Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/Kconfig          |    1 +
- drivers/staging/fsl-dpaa2/Makefile         |    1 +
- drivers/staging/fsl-dpaa2/evb/Kconfig      |    7 +
- drivers/staging/fsl-dpaa2/evb/Makefile     |   10 +
- drivers/staging/fsl-dpaa2/evb/dpdmux-cmd.h |  279 +++++++
- drivers/staging/fsl-dpaa2/evb/dpdmux.c     | 1111 +++++++++++++++++++++++++
- drivers/staging/fsl-dpaa2/evb/dpdmux.h     |  453 ++++++++++
- drivers/staging/fsl-dpaa2/evb/evb.c        | 1238 ++++++++++++++++++++++++++++
- 8 files changed, 3100 insertions(+)
- create mode 100644 drivers/staging/fsl-dpaa2/evb/Kconfig
- create mode 100644 drivers/staging/fsl-dpaa2/evb/Makefile
- create mode 100644 drivers/staging/fsl-dpaa2/evb/dpdmux-cmd.h
- create mode 100644 drivers/staging/fsl-dpaa2/evb/dpdmux.c
- create mode 100644 drivers/staging/fsl-dpaa2/evb/dpdmux.h
- create mode 100644 drivers/staging/fsl-dpaa2/evb/evb.c
-
---- a/drivers/staging/fsl-dpaa2/Kconfig
-+++ b/drivers/staging/fsl-dpaa2/Kconfig
-@@ -19,3 +19,4 @@ config FSL_DPAA2_ETHSW
- 	  BRIDGE to have support for bridge tools.
- 
- source "drivers/staging/fsl-dpaa2/mac/Kconfig"
-+source "drivers/staging/fsl-dpaa2/evb/Kconfig"
---- a/drivers/staging/fsl-dpaa2/Makefile
-+++ b/drivers/staging/fsl-dpaa2/Makefile
-@@ -5,3 +5,4 @@
- 
- obj-$(CONFIG_FSL_DPAA2_ETHSW)		+= ethsw/
- obj-$(CONFIG_FSL_DPAA2_MAC)		+= mac/
-+obj-$(CONFIG_FSL_DPAA2_EVB)		+= evb/
---- /dev/null
-+++ b/drivers/staging/fsl-dpaa2/evb/Kconfig
-@@ -0,0 +1,7 @@
-+config FSL_DPAA2_EVB
-+	tristate "DPAA2 Edge Virtual Bridge"
-+	depends on FSL_MC_BUS && FSL_DPAA2
-+	select VLAN_8021Q
-+	default y
-+	---help---
-+	Prototype driver for DPAA2 Edge Virtual Bridge.
---- /dev/null
-+++ b/drivers/staging/fsl-dpaa2/evb/Makefile
-@@ -0,0 +1,10 @@
-+
-+obj-$(CONFIG_FSL_DPAA2_EVB) += dpaa2-evb.o
-+
-+dpaa2-evb-objs := evb.o dpdmux.o
-+
-+all:
-+	make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
-+
-+clean:
-+	make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
---- /dev/null
-+++ b/drivers/staging/fsl-dpaa2/evb/dpdmux-cmd.h
-@@ -0,0 +1,279 @@
-+/* Copyright 2013-2016 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * * Neither the name of the above-listed copyright holders nor the
-+ * names of any contributors may be used to endorse or promote products
-+ * derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
-+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-+ * POSSIBILITY OF SUCH DAMAGE.
-+ */
-+#ifndef _FSL_DPDMUX_CMD_H
-+#define _FSL_DPDMUX_CMD_H
-+
-+/* DPDMUX Version */
-+#define DPDMUX_VER_MAJOR		6
-+#define DPDMUX_VER_MINOR		1
-+
-+#define DPDMUX_CMD_BASE_VER		1
-+#define DPDMUX_CMD_ID_OFFSET		4
-+
-+#define DPDMUX_CMD(id)	(((id) << DPDMUX_CMD_ID_OFFSET) | DPDMUX_CMD_BASE_VER)
-+
-+/* Command IDs */
-+#define DPDMUX_CMDID_CLOSE			DPDMUX_CMD(0x800)
-+#define DPDMUX_CMDID_OPEN			DPDMUX_CMD(0x806)
-+#define DPDMUX_CMDID_CREATE			DPDMUX_CMD(0x906)
-+#define DPDMUX_CMDID_DESTROY			DPDMUX_CMD(0x986)
-+#define DPDMUX_CMDID_GET_API_VERSION		DPDMUX_CMD(0xa06)
-+
-+#define DPDMUX_CMDID_ENABLE			DPDMUX_CMD(0x002)
-+#define DPDMUX_CMDID_DISABLE			DPDMUX_CMD(0x003)
-+#define DPDMUX_CMDID_GET_ATTR			DPDMUX_CMD(0x004)
-+#define DPDMUX_CMDID_RESET			DPDMUX_CMD(0x005)
-+#define DPDMUX_CMDID_IS_ENABLED			DPDMUX_CMD(0x006)
-+
-+#define DPDMUX_CMDID_SET_IRQ_ENABLE		DPDMUX_CMD(0x012)
-+#define DPDMUX_CMDID_GET_IRQ_ENABLE		DPDMUX_CMD(0x013)
-+#define DPDMUX_CMDID_SET_IRQ_MASK		DPDMUX_CMD(0x014)
-+#define DPDMUX_CMDID_GET_IRQ_MASK		DPDMUX_CMD(0x015)
-+#define DPDMUX_CMDID_GET_IRQ_STATUS		DPDMUX_CMD(0x016)
-+#define DPDMUX_CMDID_CLEAR_IRQ_STATUS		DPDMUX_CMD(0x017)
-+
-+#define DPDMUX_CMDID_SET_MAX_FRAME_LENGTH	DPDMUX_CMD(0x0a1)
-+
-+#define DPDMUX_CMDID_UL_RESET_COUNTERS		DPDMUX_CMD(0x0a3)
-+
-+#define DPDMUX_CMDID_IF_SET_ACCEPTED_FRAMES	DPDMUX_CMD(0x0a7)
-+#define DPDMUX_CMDID_IF_GET_ATTR		DPDMUX_CMD(0x0a8)
-+#define DPDMUX_CMDID_IF_ENABLE			DPDMUX_CMD(0x0a9)
-+#define DPDMUX_CMDID_IF_DISABLE			DPDMUX_CMD(0x0aa)
-+
-+#define DPDMUX_CMDID_IF_ADD_L2_RULE		DPDMUX_CMD(0x0b0)
-+#define DPDMUX_CMDID_IF_REMOVE_L2_RULE		DPDMUX_CMD(0x0b1)
-+#define DPDMUX_CMDID_IF_GET_COUNTER		DPDMUX_CMD(0x0b2)
-+#define DPDMUX_CMDID_IF_SET_LINK_CFG		DPDMUX_CMD(0x0b3)
-+#define DPDMUX_CMDID_IF_GET_LINK_STATE		DPDMUX_CMD(0x0b4)
-+
-+#define DPDMUX_CMDID_SET_CUSTOM_KEY		DPDMUX_CMD(0x0b5)
-+#define DPDMUX_CMDID_ADD_CUSTOM_CLS_ENTRY	DPDMUX_CMD(0x0b6)
-+#define DPDMUX_CMDID_REMOVE_CUSTOM_CLS_ENTRY	DPDMUX_CMD(0x0b7)
-+
-+#define DPDMUX_MASK(field)        \
-+	GENMASK(DPDMUX_##field##_SHIFT + DPDMUX_##field##_SIZE - 1, \
-+		DPDMUX_##field##_SHIFT)
-+#define dpdmux_set_field(var, field, val) \
-+	((var) |= (((val) << DPDMUX_##field##_SHIFT) & DPDMUX_MASK(field)))
-+#define dpdmux_get_field(var, field)      \
-+	(((var) & DPDMUX_MASK(field)) >> DPDMUX_##field##_SHIFT)
-+
-+struct dpdmux_cmd_open {
-+	u32 dpdmux_id;
-+};
-+
-+struct dpdmux_cmd_create {
-+	u8 method;
-+	u8 manip;
-+	u16 num_ifs;
-+	u32 pad;
-+
-+	u16 adv_max_dmat_entries;
-+	u16 adv_max_mc_groups;
-+	u16 adv_max_vlan_ids;
-+	u16 pad1;
-+
-+	u64 options;
-+};
-+
-+struct dpdmux_cmd_destroy {
-+	u32 dpdmux_id;
-+};
-+
-+#define DPDMUX_ENABLE_SHIFT	0
-+#define DPDMUX_ENABLE_SIZE	1
-+
-+struct dpdmux_rsp_is_enabled {
-+	u8 en;
-+};
-+
-+struct dpdmux_cmd_set_irq_enable {
-+	u8 enable;
-+	u8 pad[3];
-+	u8 irq_index;
-+};
-+
-+struct dpdmux_cmd_get_irq_enable {
-+	u32 pad;
-+	u8 irq_index;
-+};
-+
-+struct dpdmux_rsp_get_irq_enable {
-+	u8 enable;
-+};
-+
-+struct dpdmux_cmd_set_irq_mask {
-+	u32 mask;
-+	u8 irq_index;
-+};
-+
-+struct dpdmux_cmd_get_irq_mask {
-+	u32 pad;
-+	u8 irq_index;
-+};
-+
-+struct dpdmux_rsp_get_irq_mask {
-+	u32 mask;
-+};
-+
-+struct dpdmux_cmd_get_irq_status {
-+	u32 status;
-+	u8 irq_index;
-+};
-+
-+struct dpdmux_rsp_get_irq_status {
-+	u32 status;
-+};
-+
-+struct dpdmux_cmd_clear_irq_status {
-+	u32 status;
-+	u8 irq_index;
-+};
-+
-+struct dpdmux_rsp_get_attr {
-+	u8 method;
-+	u8 manip;
-+	u16 num_ifs;
-+	u16 mem_size;
-+	u16 pad;
-+
-+	u64 pad1;
-+
-+	u32 id;
-+	u32 pad2;
-+
-+	u64 options;
-+};
-+
-+struct dpdmux_cmd_set_max_frame_length {
-+	u16 max_frame_length;
-+};
-+
-+#define DPDMUX_ACCEPTED_FRAMES_TYPE_SHIFT	0
-+#define DPDMUX_ACCEPTED_FRAMES_TYPE_SIZE	4
-+#define DPDMUX_UNACCEPTED_FRAMES_ACTION_SHIFT	4
-+#define DPDMUX_UNACCEPTED_FRAMES_ACTION_SIZE	4
-+
-+struct dpdmux_cmd_if_set_accepted_frames {
-+	u16 if_id;
-+	u8 frames_options;
-+};
-+
-+struct dpdmux_cmd_if {
-+	u16 if_id;
-+};
-+
-+struct dpdmux_rsp_if_get_attr {
-+	u8 pad[3];
-+	u8 enabled;
-+	u8 pad1[3];
-+	u8 accepted_frames_type;
-+	u32 rate;
-+};
-+
-+struct dpdmux_cmd_if_l2_rule {
-+	u16 if_id;
-+	u8 mac_addr5;
-+	u8 mac_addr4;
-+	u8 mac_addr3;
-+	u8 mac_addr2;
-+	u8 mac_addr1;
-+	u8 mac_addr0;
-+
-+	u32 pad;
-+	u16 vlan_id;
-+};
-+
-+struct dpdmux_cmd_if_get_counter {
-+	u16 if_id;
-+	u8 counter_type;
-+};
-+
-+struct dpdmux_rsp_if_get_counter {
-+	u64 pad;
-+	u64 counter;
-+};
-+
-+struct dpdmux_cmd_if_set_link_cfg {
-+	u16 if_id;
-+	u16 pad[3];
-+
-+	u32 rate;
-+	u32 pad1;
-+
-+	u64 options;
-+};
-+
-+struct dpdmux_cmd_if_get_link_state {
-+	u16 if_id;
-+};
-+
-+struct dpdmux_rsp_if_get_link_state {
-+	u32 pad;
-+	u8 up;
-+	u8 pad1[3];
-+
-+	u32 rate;
-+	u32 pad2;
-+
-+	u64 options;
-+};
-+
-+struct dpdmux_rsp_get_api_version {
-+	u16 major;
-+	u16 minor;
-+};
-+
-+struct dpdmux_set_custom_key {
-+	u64 pad[6];
-+	u64 key_cfg_iova;
-+};
-+
-+struct dpdmux_cmd_add_custom_cls_entry {
-+	u8 pad[3];
-+	u8 key_size;
-+	u16 pad1;
-+	u16 dest_if;
-+	u64 key_iova;
-+	u64 mask_iova;
-+};
-+
-+struct dpdmux_cmd_remove_custom_cls_entry {
-+	u8 pad[3];
-+	u8 key_size;
-+	u32 pad1;
-+	u64 key_iova;
-+	u64 mask_iova;
-+};
-+
-+#endif /* _FSL_DPDMUX_CMD_H */
---- /dev/null
-+++ b/drivers/staging/fsl-dpaa2/evb/dpdmux.c
-@@ -0,0 +1,1111 @@
-+/* Copyright 2013-2016 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * * Neither the name of the above-listed copyright holders nor the
-+ * names of any contributors may be used to endorse or promote products
-+ * derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
-+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-+ * POSSIBILITY OF SUCH DAMAGE.
-+ */
-+#include "../../fsl-mc/include/mc.h"
-+#include "dpdmux.h"
-+#include "dpdmux-cmd.h"
-+
-+/**
-+ * dpdmux_open() - Open a control session for the specified object
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @dpdmux_id:		DPDMUX unique ID
-+ * @token:		Returned token; use in subsequent API calls
-+ *
-+ * This function can be used to open a control session for an
-+ * already created object; an object may have been declared in
-+ * the DPL or by calling the dpdmux_create() function.
-+ * This function returns a unique authentication token,
-+ * associated with the specific object ID and the specific MC
-+ * portal; this token must be used in all subsequent commands for
-+ * this specific object.
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_open(struct fsl_mc_io *mc_io,
-+		u32 cmd_flags,
-+		int dpdmux_id,
-+		u16 *token)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_open *cmd_params;
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_OPEN,
-+					  cmd_flags,
-+					  0);
-+	cmd_params = (struct dpdmux_cmd_open *)cmd.params;
-+	cmd_params->dpdmux_id = cpu_to_le32(dpdmux_id);
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	*token = mc_cmd_hdr_read_token(&cmd);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpdmux_close() - Close the control session of the object
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:		Token of DPDMUX object
-+ *
-+ * After this function is called, no further operations are
-+ * allowed on the object without opening a new control session.
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_close(struct fsl_mc_io *mc_io,
-+		 u32 cmd_flags,
-+		 u16 token)
-+{
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_CLOSE,
-+					  cmd_flags,
-+					  token);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_create() - Create the DPDMUX object
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @dprc_token:	Parent container token; '0' for default container
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @cfg:	Configuration structure
-+ * @obj_id: returned object id
-+ *
-+ * Create the DPDMUX object, allocate required resources and
-+ * perform required initialization.
-+ *
-+ * The object can be created either by declaring it in the
-+ * DPL file, or by calling this function.
-+ *
-+ * The function accepts an authentication token of a parent
-+ * container that this object should be assigned to. The token
-+ * can be '0' so the object will be assigned to the default container.
-+ * The newly created object can be opened with the returned
-+ * object id and using the container's associated tokens and MC portals.
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_create(struct fsl_mc_io *mc_io,
-+		  u16 dprc_token,
-+		  u32 cmd_flags,
-+		  const struct dpdmux_cfg *cfg,
-+		  u32 *obj_id)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_create *cmd_params;
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_CREATE,
-+					  cmd_flags,
-+					  dprc_token);
-+	cmd_params = (struct dpdmux_cmd_create *)cmd.params;
-+	cmd_params->method = cfg->method;
-+	cmd_params->manip = cfg->manip;
-+	cmd_params->num_ifs = cpu_to_le16(cfg->num_ifs);
-+	cmd_params->adv_max_dmat_entries =
-+			cpu_to_le16(cfg->adv.max_dmat_entries);
-+	cmd_params->adv_max_mc_groups = cpu_to_le16(cfg->adv.max_mc_groups);
-+	cmd_params->adv_max_vlan_ids = cpu_to_le16(cfg->adv.max_vlan_ids);
-+	cmd_params->options = cpu_to_le64(cfg->adv.options);
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	*obj_id = mc_cmd_hdr_read_token(&cmd);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpdmux_destroy() - Destroy the DPDMUX object and release all its resources.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @dprc_token: Parent container token; '0' for default container
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @object_id:	The object id; it must be a valid id within the container that
-+ * created this object;
-+ *
-+ * The function accepts the authentication token of the parent container that
-+ * created the object (not the one that currently owns the object). The object
-+ * is searched within parent using the provided 'object_id'.
-+ * All tokens to the object must be closed before calling destroy.
-+ *
-+ * Return:	'0' on Success; error code otherwise.
-+ */
-+int dpdmux_destroy(struct fsl_mc_io *mc_io,
-+		   u16 dprc_token,
-+		   u32 cmd_flags,
-+		   u32 object_id)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_destroy *cmd_params;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_DESTROY,
-+					  cmd_flags,
-+					  dprc_token);
-+	cmd_params = (struct dpdmux_cmd_destroy *)cmd.params;
-+	cmd_params->dpdmux_id = cpu_to_le32(object_id);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_enable() - Enable DPDMUX functionality
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_enable(struct fsl_mc_io *mc_io,
-+		  u32 cmd_flags,
-+		  u16 token)
-+{
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_ENABLE,
-+					  cmd_flags,
-+					  token);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_disable() - Disable DPDMUX functionality
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_disable(struct fsl_mc_io *mc_io,
-+		   u32 cmd_flags,
-+		   u16 token)
-+{
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_DISABLE,
-+					  cmd_flags,
-+					  token);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_is_enabled() - Check if the DPDMUX is enabled.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ * @en:		Returns '1' if object is enabled; '0' otherwise
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_is_enabled(struct fsl_mc_io *mc_io,
-+		      u32 cmd_flags,
-+		      u16 token,
-+		      int *en)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_rsp_is_enabled *rsp_params;
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IS_ENABLED,
-+					  cmd_flags,
-+					  token);
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	rsp_params = (struct dpdmux_rsp_is_enabled *)cmd.params;
-+	*en = dpdmux_get_field(rsp_params->en, ENABLE);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpdmux_reset() - Reset the DPDMUX, returns the object to initial state.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_reset(struct fsl_mc_io *mc_io,
-+		 u32 cmd_flags,
-+		 u16 token)
-+{
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_RESET,
-+					  cmd_flags,
-+					  token);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_set_irq_enable() - Set overall interrupt state.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ * @irq_index:	The interrupt index to configure
-+ * @en:		Interrupt state - enable = 1, disable = 0
-+ *
-+ * Allows GPP software to control when interrupts are generated.
-+ * Each interrupt can have up to 32 causes.  The enable/disable control's the
-+ * overall interrupt state. if the interrupt is disabled no causes will cause
-+ * an interrupt.
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_set_irq_enable(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  u8 irq_index,
-+			  u8 en)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_set_irq_enable *cmd_params;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_SET_IRQ_ENABLE,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_set_irq_enable *)cmd.params;
-+	cmd_params->enable = en;
-+	cmd_params->irq_index = irq_index;
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_get_irq_enable() - Get overall interrupt state.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ * @irq_index:	The interrupt index to configure
-+ * @en:		Returned interrupt state - enable = 1, disable = 0
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_get_irq_enable(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  u8 irq_index,
-+			  u8 *en)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_get_irq_enable *cmd_params;
-+	struct dpdmux_rsp_get_irq_enable *rsp_params;
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_GET_IRQ_ENABLE,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_get_irq_enable *)cmd.params;
-+	cmd_params->irq_index = irq_index;
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	rsp_params = (struct dpdmux_rsp_get_irq_enable *)cmd.params;
-+	*en = rsp_params->enable;
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpdmux_set_irq_mask() - Set interrupt mask.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ * @irq_index:	The interrupt index to configure
-+ * @mask:	event mask to trigger interrupt;
-+ *		each bit:
-+ *			0 = ignore event
-+ *			1 = consider event for asserting IRQ
-+ *
-+ * Every interrupt can have up to 32 causes and the interrupt model supports
-+ * masking/unmasking each cause independently
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_set_irq_mask(struct fsl_mc_io *mc_io,
-+			u32 cmd_flags,
-+			u16 token,
-+			u8 irq_index,
-+			u32 mask)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_set_irq_mask *cmd_params;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_SET_IRQ_MASK,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_set_irq_mask *)cmd.params;
-+	cmd_params->mask = cpu_to_le32(mask);
-+	cmd_params->irq_index = irq_index;
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_get_irq_mask() - Get interrupt mask.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ * @irq_index:	The interrupt index to configure
-+ * @mask:	Returned event mask to trigger interrupt
-+ *
-+ * Every interrupt can have up to 32 causes and the interrupt model supports
-+ * masking/unmasking each cause independently
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_get_irq_mask(struct fsl_mc_io *mc_io,
-+			u32 cmd_flags,
-+			u16 token,
-+			u8 irq_index,
-+			u32 *mask)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_get_irq_mask *cmd_params;
-+	struct dpdmux_rsp_get_irq_mask *rsp_params;
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_GET_IRQ_MASK,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_get_irq_mask *)cmd.params;
-+	cmd_params->irq_index = irq_index;
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	rsp_params = (struct dpdmux_rsp_get_irq_mask *)cmd.params;
-+	*mask = le32_to_cpu(rsp_params->mask);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpdmux_get_irq_status() - Get the current status of any pending interrupts.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ * @irq_index:	The interrupt index to configure
-+ * @status:	Returned interrupts status - one bit per cause:
-+ *			0 = no interrupt pending
-+ *			1 = interrupt pending
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_get_irq_status(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  u8 irq_index,
-+			  u32 *status)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_get_irq_status *cmd_params;
-+	struct dpdmux_rsp_get_irq_status *rsp_params;
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_GET_IRQ_STATUS,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_get_irq_status *)cmd.params;
-+	cmd_params->status = cpu_to_le32(*status);
-+	cmd_params->irq_index = irq_index;
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	rsp_params = (struct dpdmux_rsp_get_irq_status *)cmd.params;
-+	*status = le32_to_cpu(rsp_params->status);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpdmux_clear_irq_status() - Clear a pending interrupt's status
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ * @irq_index:	The interrupt index to configure
-+ * @status:	bits to clear (W1C) - one bit per cause:
-+ *			0 = don't change
-+ *			1 = clear status bit
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_clear_irq_status(struct fsl_mc_io *mc_io,
-+			    u32 cmd_flags,
-+			    u16 token,
-+			    u8 irq_index,
-+			    u32 status)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_clear_irq_status *cmd_params;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_CLEAR_IRQ_STATUS,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_clear_irq_status *)cmd.params;
-+	cmd_params->status = cpu_to_le32(status);
-+	cmd_params->irq_index = irq_index;
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_get_attributes() - Retrieve DPDMUX attributes
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ * @attr:	Returned object's attributes
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_get_attributes(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  struct dpdmux_attr *attr)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_rsp_get_attr *rsp_params;
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_GET_ATTR,
-+					  cmd_flags,
-+					  token);
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	rsp_params = (struct dpdmux_rsp_get_attr *)cmd.params;
-+	attr->id = le32_to_cpu(rsp_params->id);
-+	attr->options = le64_to_cpu(rsp_params->options);
-+	attr->method = rsp_params->method;
-+	attr->manip = rsp_params->manip;
-+	attr->num_ifs = le16_to_cpu(rsp_params->num_ifs);
-+	attr->mem_size = le16_to_cpu(rsp_params->mem_size);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpdmux_if_enable() - Enable Interface
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ * @if_id:	Interface Identifier
-+ *
-+ * Return:	Completion status. '0' on Success; Error code otherwise.
-+ */
-+int dpdmux_if_enable(struct fsl_mc_io *mc_io,
-+		     u32 cmd_flags,
-+		     u16 token,
-+		     u16 if_id)
-+{
-+	struct dpdmux_cmd_if *cmd_params;
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_ENABLE,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_if *)cmd.params;
-+	cmd_params->if_id = cpu_to_le16(if_id);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_if_disable() - Disable Interface
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ * @if_id:	Interface Identifier
-+ *
-+ * Return:	Completion status. '0' on Success; Error code otherwise.
-+ */
-+int dpdmux_if_disable(struct fsl_mc_io *mc_io,
-+		      u32 cmd_flags,
-+		      u16 token,
-+		      u16 if_id)
-+{
-+	struct dpdmux_cmd_if *cmd_params;
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_DISABLE,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_if *)cmd.params;
-+	cmd_params->if_id = cpu_to_le16(if_id);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_set_max_frame_length() - Set the maximum frame length in DPDMUX
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:		Token of DPDMUX object
-+ * @max_frame_length:	The required maximum frame length
-+ *
-+ * Update the maximum frame length on all DMUX interfaces.
-+ * In case of VEPA, the maximum frame length on all dmux interfaces
-+ * will be updated with the minimum value of the mfls of the connected
-+ * dpnis and the actual value of dmux mfl.
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_set_max_frame_length(struct fsl_mc_io *mc_io,
-+				u32 cmd_flags,
-+				u16 token,
-+				u16 max_frame_length)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_set_max_frame_length *cmd_params;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_SET_MAX_FRAME_LENGTH,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_set_max_frame_length *)cmd.params;
-+	cmd_params->max_frame_length = cpu_to_le16(max_frame_length);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_ul_reset_counters() - Function resets the uplink counter
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_ul_reset_counters(struct fsl_mc_io *mc_io,
-+			     u32 cmd_flags,
-+			     u16 token)
-+{
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_UL_RESET_COUNTERS,
-+					  cmd_flags,
-+					  token);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_if_set_accepted_frames() - Set the accepted frame types
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ * @if_id:	Interface ID (0 for uplink, or 1-num_ifs);
-+ * @cfg:	Frame types configuration
-+ *
-+ * if 'DPDMUX_ADMIT_ONLY_VLAN_TAGGED' is set - untagged frames or
-+ * priority-tagged frames are discarded.
-+ * if 'DPDMUX_ADMIT_ONLY_UNTAGGED' is set - untagged frames or
-+ * priority-tagged frames are accepted.
-+ * if 'DPDMUX_ADMIT_ALL' is set (default mode) - all VLAN tagged,
-+ * untagged and priority-tagged frame are accepted;
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_if_set_accepted_frames(struct fsl_mc_io *mc_io,
-+				  u32 cmd_flags,
-+				  u16 token,
-+				  u16 if_id,
-+				  const struct dpdmux_accepted_frames *cfg)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_if_set_accepted_frames *cmd_params;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_SET_ACCEPTED_FRAMES,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_if_set_accepted_frames *)cmd.params;
-+	cmd_params->if_id = cpu_to_le16(if_id);
-+	dpdmux_set_field(cmd_params->frames_options, ACCEPTED_FRAMES_TYPE,
-+			 cfg->type);
-+	dpdmux_set_field(cmd_params->frames_options, UNACCEPTED_FRAMES_ACTION,
-+			 cfg->unaccept_act);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_if_get_attributes() - Obtain DPDMUX interface attributes
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ * @if_id:	Interface ID (0 for uplink, or 1-num_ifs);
-+ * @attr:	Interface attributes
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_if_get_attributes(struct fsl_mc_io *mc_io,
-+			     u32 cmd_flags,
-+			     u16 token,
-+			     u16 if_id,
-+			     struct dpdmux_if_attr *attr)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_if *cmd_params;
-+	struct dpdmux_rsp_if_get_attr *rsp_params;
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_GET_ATTR,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_if *)cmd.params;
-+	cmd_params->if_id = cpu_to_le16(if_id);
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	rsp_params = (struct dpdmux_rsp_if_get_attr *)cmd.params;
-+	attr->rate = le32_to_cpu(rsp_params->rate);
-+	attr->enabled = dpdmux_get_field(rsp_params->enabled, ENABLE);
-+	attr->accept_frame_type =
-+			dpdmux_get_field(rsp_params->accepted_frames_type,
-+					 ACCEPTED_FRAMES_TYPE);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpdmux_if_remove_l2_rule() - Remove L2 rule from DPDMUX table
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ * @if_id:	Destination interface ID
-+ * @rule:	L2 rule
-+ *
-+ * Function removes a L2 rule from DPDMUX table
-+ * or adds an interface to an existing multicast address
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_if_remove_l2_rule(struct fsl_mc_io *mc_io,
-+			     u32 cmd_flags,
-+			     u16 token,
-+			     u16 if_id,
-+			     const struct dpdmux_l2_rule *rule)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_if_l2_rule *cmd_params;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_REMOVE_L2_RULE,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_if_l2_rule *)cmd.params;
-+	cmd_params->if_id = cpu_to_le16(if_id);
-+	cmd_params->vlan_id = cpu_to_le16(rule->vlan_id);
-+	cmd_params->mac_addr5 = rule->mac_addr[5];
-+	cmd_params->mac_addr4 = rule->mac_addr[4];
-+	cmd_params->mac_addr3 = rule->mac_addr[3];
-+	cmd_params->mac_addr2 = rule->mac_addr[2];
-+	cmd_params->mac_addr1 = rule->mac_addr[1];
-+	cmd_params->mac_addr0 = rule->mac_addr[0];
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_if_add_l2_rule() - Add L2 rule into DPDMUX table
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMUX object
-+ * @if_id:	Destination interface ID
-+ * @rule:	L2 rule
-+ *
-+ * Function adds a L2 rule into DPDMUX table
-+ * or adds an interface to an existing multicast address
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_if_add_l2_rule(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  u16 if_id,
-+			  const struct dpdmux_l2_rule *rule)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_if_l2_rule *cmd_params;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_ADD_L2_RULE,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_if_l2_rule *)cmd.params;
-+	cmd_params->if_id = cpu_to_le16(if_id);
-+	cmd_params->vlan_id = cpu_to_le16(rule->vlan_id);
-+	cmd_params->mac_addr5 = rule->mac_addr[5];
-+	cmd_params->mac_addr4 = rule->mac_addr[4];
-+	cmd_params->mac_addr3 = rule->mac_addr[3];
-+	cmd_params->mac_addr2 = rule->mac_addr[2];
-+	cmd_params->mac_addr1 = rule->mac_addr[1];
-+	cmd_params->mac_addr0 = rule->mac_addr[0];
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_if_get_counter() - Functions obtains specific counter of an interface
-+ * @mc_io: Pointer to MC portal's I/O object
-+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token: Token of DPDMUX object
-+ * @if_id:  Interface Id
-+ * @counter_type: counter type
-+ * @counter: Returned specific counter information
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_if_get_counter(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  u16 if_id,
-+			  enum dpdmux_counter_type counter_type,
-+			  u64 *counter)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_if_get_counter *cmd_params;
-+	struct dpdmux_rsp_if_get_counter *rsp_params;
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_GET_COUNTER,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_if_get_counter *)cmd.params;
-+	cmd_params->if_id = cpu_to_le16(if_id);
-+	cmd_params->counter_type = counter_type;
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	rsp_params = (struct dpdmux_rsp_if_get_counter *)cmd.params;
-+	*counter = le64_to_cpu(rsp_params->counter);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpdmux_if_set_link_cfg() - set the link configuration.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token: Token of DPSW object
-+ * @if_id: interface id
-+ * @cfg: Link configuration
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_if_set_link_cfg(struct fsl_mc_io *mc_io,
-+			   u32 cmd_flags,
-+			   u16 token,
-+			   u16 if_id,
-+			   struct dpdmux_link_cfg *cfg)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_if_set_link_cfg *cmd_params;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_SET_LINK_CFG,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_if_set_link_cfg *)cmd.params;
-+	cmd_params->if_id = cpu_to_le16(if_id);
-+	cmd_params->rate = cpu_to_le32(cfg->rate);
-+	cmd_params->options = cpu_to_le64(cfg->options);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_if_get_link_state - Return the link state
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token: Token of DPSW object
-+ * @if_id: interface id
-+ * @state: link state
-+ *
-+ * @returns	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_if_get_link_state(struct fsl_mc_io *mc_io,
-+			     u32 cmd_flags,
-+			     u16 token,
-+			     u16 if_id,
-+			     struct dpdmux_link_state *state)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_cmd_if_get_link_state *cmd_params;
-+	struct dpdmux_rsp_if_get_link_state *rsp_params;
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_GET_LINK_STATE,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_if_get_link_state *)cmd.params;
-+	cmd_params->if_id = cpu_to_le16(if_id);
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	rsp_params = (struct dpdmux_rsp_if_get_link_state *)cmd.params;
-+	state->rate = le32_to_cpu(rsp_params->rate);
-+	state->options = le64_to_cpu(rsp_params->options);
-+	state->up = dpdmux_get_field(rsp_params->up, ENABLE);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpdmux_set_custom_key - Set a custom classification key.
-+ *
-+ * This API is only available for DPDMUX instance created with
-+ * DPDMUX_METHOD_CUSTOM.  This API must be called before populating the
-+ * classification table using dpdmux_add_custom_cls_entry.
-+ *
-+ * Calls to dpdmux_set_custom_key remove all existing classification entries
-+ * that may have been added previously using dpdmux_add_custom_cls_entry.
-+ *
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token: Token of DPSW object
-+ * @if_id: interface id
-+ * @key_cfg_iova: DMA address of a configuration structure set up using
-+ *		  dpkg_prepare_key_cfg. Maximum key size is 24 bytes.
-+ *
-+ * @returns	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_set_custom_key(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  u64 key_cfg_iova)
-+{
-+	struct dpdmux_set_custom_key *cmd_params;
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_SET_CUSTOM_KEY,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_set_custom_key *)cmd.params;
-+	cmd_params->key_cfg_iova = cpu_to_le64(key_cfg_iova);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_add_custom_cls_entry - Adds a custom classification entry.
-+ *
-+ * This API is only available for DPDMUX instances created with
-+ * DPDMUX_METHOD_CUSTOM.  Before calling this function a classification key
-+ * composition rule must be set up using dpdmux_set_custom_key.
-+ *
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token: Token of DPSW object
-+ * @rule: Classification rule to insert.  Rules cannot be duplicated, if a
-+ *	matching rule already exists, the action will be replaced.
-+ * @action: Action to perform for matching traffic.
-+ *
-+ * @returns	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_add_custom_cls_entry(struct fsl_mc_io *mc_io,
-+				u32 cmd_flags,
-+				u16 token,
-+				struct dpdmux_rule_cfg *rule,
-+				struct dpdmux_cls_action *action)
-+{
-+	struct dpdmux_cmd_add_custom_cls_entry *cmd_params;
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_ADD_CUSTOM_CLS_ENTRY,
-+					  cmd_flags,
-+					  token);
-+
-+	cmd_params = (struct dpdmux_cmd_add_custom_cls_entry *)cmd.params;
-+	cmd_params->key_size = rule->key_size;
-+	cmd_params->dest_if = cpu_to_le16(action->dest_if);
-+	cmd_params->key_iova = cpu_to_le64(rule->key_iova);
-+	cmd_params->mask_iova = cpu_to_le64(rule->mask_iova);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_remove_custom_cls_entry - Removes a custom classification entry.
-+ *
-+ * This API is only available for DPDMUX instances created with
-+ * DPDMUX_METHOD_CUSTOM.  The API can be used to remove classification
-+ * entries previously inserted using dpdmux_add_custom_cls_entry.
-+ *
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token: Token of DPSW object
-+ * @rule: Classification rule to remove
-+ *
-+ * @returns	'0' on Success; Error code otherwise.
-+ */
-+int dpdmux_remove_custom_cls_entry(struct fsl_mc_io *mc_io,
-+				   u32 cmd_flags,
-+				   u16 token,
-+				   struct dpdmux_rule_cfg *rule)
-+{
-+	struct dpdmux_cmd_remove_custom_cls_entry *cmd_params;
-+	struct mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_REMOVE_CUSTOM_CLS_ENTRY,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpdmux_cmd_remove_custom_cls_entry *)cmd.params;
-+	cmd_params->key_size = rule->key_size;
-+	cmd_params->key_iova = cpu_to_le64(rule->key_iova);
-+	cmd_params->mask_iova = cpu_to_le64(rule->mask_iova);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmux_get_api_version() - Get Data Path Demux API version
-+ * @mc_io:  Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @major_ver:	Major version of data path demux API
-+ * @minor_ver:	Minor version of data path demux API
-+ *
-+ * Return:  '0' on Success; Error code otherwise.
-+ */
-+int dpdmux_get_api_version(struct fsl_mc_io *mc_io,
-+			   u32 cmd_flags,
-+			   u16 *major_ver,
-+			   u16 *minor_ver)
-+{
-+	struct mc_command cmd = { 0 };
-+	struct dpdmux_rsp_get_api_version *rsp_params;
-+	int err;
-+
-+	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_GET_API_VERSION,
-+					cmd_flags,
-+					0);
-+
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	rsp_params = (struct dpdmux_rsp_get_api_version *)cmd.params;
-+	*major_ver = le16_to_cpu(rsp_params->major);
-+	*minor_ver = le16_to_cpu(rsp_params->minor);
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/staging/fsl-dpaa2/evb/dpdmux.h
-@@ -0,0 +1,453 @@
-+/* Copyright 2013-2015 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * * Neither the name of the above-listed copyright holders nor the
-+ * names of any contributors may be used to endorse or promote products
-+ * derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
-+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-+ * POSSIBILITY OF SUCH DAMAGE.
-+ */
-+#ifndef __FSL_DPDMUX_H
-+#define __FSL_DPDMUX_H
-+
-+struct fsl_mc_io;
-+
-+/* Data Path Demux API
-+ * Contains API for handling DPDMUX topology and functionality
-+ */
-+
-+int dpdmux_open(struct fsl_mc_io *mc_io,
-+		u32 cmd_flags,
-+		int dpdmux_id,
-+		u16 *token);
-+
-+int dpdmux_close(struct fsl_mc_io *mc_io,
-+		 u32 cmd_flags,
-+		 u16 token);
-+
-+/**
-+ * DPDMUX general options
-+ */
-+
-+/**
-+ * Enable bridging between internal interfaces
-+ */
-+#define DPDMUX_OPT_BRIDGE_EN	0x0000000000000002ULL
-+
-+/**
-+ * Mask support for classification
-+ */
-+#define DPDMUX_OPT_CLS_MASK_SUPPORT		0x0000000000000020ULL
-+
-+#define DPDMUX_IRQ_INDEX_IF	0x0000
-+#define DPDMUX_IRQ_INDEX	0x0001
-+
-+/**
-+ * IRQ event - Indicates that the link state changed
-+ */
-+#define DPDMUX_IRQ_EVENT_LINK_CHANGED	0x0001
-+
-+/**
-+ * enum dpdmux_manip - DPDMUX manipulation operations
-+ * @DPDMUX_MANIP_NONE:	No manipulation on frames
-+ * @DPDMUX_MANIP_ADD_REMOVE_S_VLAN: Add S-VLAN on egress, remove it on ingress
-+ */
-+enum dpdmux_manip {
-+	DPDMUX_MANIP_NONE = 0x0,
-+	DPDMUX_MANIP_ADD_REMOVE_S_VLAN = 0x1
-+};
-+
-+/**
-+ * enum dpdmux_method - DPDMUX method options
-+ * @DPDMUX_METHOD_NONE: no DPDMUX method
-+ * @DPDMUX_METHOD_C_VLAN_MAC: DPDMUX based on C-VLAN and MAC address
-+ * @DPDMUX_METHOD_MAC: DPDMUX based on MAC address
-+ * @DPDMUX_METHOD_C_VLAN: DPDMUX based on C-VLAN
-+ * @DPDMUX_METHOD_S_VLAN: DPDMUX based on S-VLAN
-+ */
-+enum dpdmux_method {
-+	DPDMUX_METHOD_NONE = 0x0,
-+	DPDMUX_METHOD_C_VLAN_MAC = 0x1,
-+	DPDMUX_METHOD_MAC = 0x2,
-+	DPDMUX_METHOD_C_VLAN = 0x3,
-+	DPDMUX_METHOD_S_VLAN = 0x4,
-+	DPDMUX_METHOD_CUSTOM = 0x5
-+};
-+
-+/**
-+ * struct dpdmux_cfg - DPDMUX configuration parameters
-+ * @method: Defines the operation method for the DPDMUX address table
-+ * @manip: Required manipulation operation
-+ * @num_ifs: Number of interfaces (excluding the uplink interface)
-+ * @adv: Advanced parameters; default is all zeros;
-+ *	 use this structure to change default settings
-+ */
-+struct dpdmux_cfg {
-+	enum dpdmux_method method;
-+	enum dpdmux_manip manip;
-+	u16 num_ifs;
-+	/**
-+	 * struct adv - Advanced parameters
-+	 * @options: DPDMUX options - combination of 'DPDMUX_OPT_<X>' flags
-+	 * @max_dmat_entries: Maximum entries in DPDMUX address table
-+	 *		0 - indicates default: 64 entries per interface.
-+	 * @max_mc_groups: Number of multicast groups in DPDMUX table
-+	 *		0 - indicates default: 32 multicast groups
-+	 * @max_vlan_ids: max vlan ids allowed in the system -
-+	 *		relevant only case of working in mac+vlan method.
-+	 *		0 - indicates default 16 vlan ids.
-+	 */
-+	struct {
-+		u64 options;
-+		u16 max_dmat_entries;
-+		u16 max_mc_groups;
-+		u16 max_vlan_ids;
-+	} adv;
-+};
-+
-+int dpdmux_create(struct fsl_mc_io *mc_io,
-+		  u16 dprc_token,
-+		  u32 cmd_flags,
-+		  const struct dpdmux_cfg *cfg,
-+		  u32 *obj_id);
-+
-+int dpdmux_destroy(struct fsl_mc_io *mc_io,
-+		   u16 dprc_token,
-+		   u32 cmd_flags,
-+		   u32 object_id);
-+
-+int dpdmux_enable(struct fsl_mc_io *mc_io,
-+		  u32 cmd_flags,
-+		  u16 token);
-+
-+int dpdmux_disable(struct fsl_mc_io *mc_io,
-+		   u32 cmd_flags,
-+		   u16 token);
-+
-+int dpdmux_is_enabled(struct fsl_mc_io *mc_io,
-+		      u32 cmd_flags,
-+		      u16 token,
-+		      int *en);
-+
-+int dpdmux_reset(struct fsl_mc_io *mc_io,
-+		 u32 cmd_flags,
-+		 u16 token);
-+
-+int dpdmux_set_irq_enable(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  u8 irq_index,
-+			  u8 en);
-+
-+int dpdmux_get_irq_enable(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  u8 irq_index,
-+			  u8 *en);
-+
-+int dpdmux_set_irq_mask(struct fsl_mc_io *mc_io,
-+			u32 cmd_flags,
-+			u16 token,
-+			u8 irq_index,
-+			u32 mask);
-+
-+int dpdmux_get_irq_mask(struct fsl_mc_io *mc_io,
-+			u32 cmd_flags,
-+			u16 token,
-+			u8 irq_index,
-+			u32 *mask);
-+
-+int dpdmux_get_irq_status(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  u8 irq_index,
-+			  u32 *status);
-+
-+int dpdmux_clear_irq_status(struct fsl_mc_io *mc_io,
-+			    u32 cmd_flags,
-+			    u16 token,
-+			    u8 irq_index,
-+			    u32 status);
-+
-+/**
-+ * struct dpdmux_attr - Structure representing DPDMUX attributes
-+ * @id: DPDMUX object ID
-+ * @options: Configuration options (bitmap)
-+ * @method: DPDMUX address table method
-+ * @manip: DPDMUX manipulation type
-+ * @num_ifs: Number of interfaces (excluding the uplink interface)
-+ * @mem_size: DPDMUX frame storage memory size
-+ */
-+struct dpdmux_attr {
-+	int id;
-+	u64 options;
-+	enum dpdmux_method method;
-+	enum dpdmux_manip manip;
-+	u16 num_ifs;
-+	u16 mem_size;
-+};
-+
-+int dpdmux_get_attributes(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  struct dpdmux_attr *attr);
-+
-+int dpdmux_set_max_frame_length(struct fsl_mc_io *mc_io,
-+				u32 cmd_flags,
-+				u16 token,
-+				u16 max_frame_length);
-+
-+/**
-+ * enum dpdmux_counter_type - Counter types
-+ * @DPDMUX_CNT_ING_FRAME: Counts ingress frames
-+ * @DPDMUX_CNT_ING_BYTE: Counts ingress bytes
-+ * @DPDMUX_CNT_ING_FLTR_FRAME: Counts filtered ingress frames
-+ * @DPDMUX_CNT_ING_FRAME_DISCARD: Counts discarded ingress frames
-+ * @DPDMUX_CNT_ING_MCAST_FRAME: Counts ingress multicast frames
-+ * @DPDMUX_CNT_ING_MCAST_BYTE: Counts ingress multicast bytes
-+ * @DPDMUX_CNT_ING_BCAST_FRAME: Counts ingress broadcast frames
-+ * @DPDMUX_CNT_ING_BCAST_BYTES: Counts ingress broadcast bytes
-+ * @DPDMUX_CNT_EGR_FRAME: Counts egress frames
-+ * @DPDMUX_CNT_EGR_BYTE: Counts egress bytes
-+ * @DPDMUX_CNT_EGR_FRAME_DISCARD: Counts discarded egress frames
-+ */
-+enum dpdmux_counter_type {
-+	DPDMUX_CNT_ING_FRAME = 0x0,
-+	DPDMUX_CNT_ING_BYTE = 0x1,
-+	DPDMUX_CNT_ING_FLTR_FRAME = 0x2,
-+	DPDMUX_CNT_ING_FRAME_DISCARD = 0x3,
-+	DPDMUX_CNT_ING_MCAST_FRAME = 0x4,
-+	DPDMUX_CNT_ING_MCAST_BYTE = 0x5,
-+	DPDMUX_CNT_ING_BCAST_FRAME = 0x6,
-+	DPDMUX_CNT_ING_BCAST_BYTES = 0x7,
-+	DPDMUX_CNT_EGR_FRAME = 0x8,
-+	DPDMUX_CNT_EGR_BYTE = 0x9,
-+	DPDMUX_CNT_EGR_FRAME_DISCARD = 0xa
-+};
-+
-+/**
-+ * enum dpdmux_accepted_frames_type - DPDMUX frame types
-+ * @DPDMUX_ADMIT_ALL: The device accepts VLAN tagged, untagged and
-+ *			priority-tagged frames
-+ * @DPDMUX_ADMIT_ONLY_VLAN_TAGGED: The device discards untagged frames or
-+ *				priority-tagged frames that are received on this
-+ *				interface
-+ * @DPDMUX_ADMIT_ONLY_UNTAGGED: Untagged frames or priority-tagged frames
-+ *				received on this interface are accepted
-+ */
-+enum dpdmux_accepted_frames_type {
-+	DPDMUX_ADMIT_ALL = 0,
-+	DPDMUX_ADMIT_ONLY_VLAN_TAGGED = 1,
-+	DPDMUX_ADMIT_ONLY_UNTAGGED = 2
-+};
-+
-+/**
-+ * enum dpdmux_action - DPDMUX action for un-accepted frames
-+ * @DPDMUX_ACTION_DROP: Drop un-accepted frames
-+ * @DPDMUX_ACTION_REDIRECT_TO_CTRL: Redirect un-accepted frames to the
-+ *					control interface
-+ */
-+enum dpdmux_action {
-+	DPDMUX_ACTION_DROP = 0,
-+	DPDMUX_ACTION_REDIRECT_TO_CTRL = 1
-+};
-+
-+/**
-+ * struct dpdmux_accepted_frames - Frame types configuration
-+ * @type: Defines ingress accepted frames
-+ * @unaccept_act: Defines action on frames not accepted
-+ */
-+struct dpdmux_accepted_frames {
-+	enum dpdmux_accepted_frames_type type;
-+	enum dpdmux_action unaccept_act;
-+};
-+
-+int dpdmux_if_set_accepted_frames(struct fsl_mc_io *mc_io,
-+				  u32 cmd_flags,
-+				  u16 token,
-+				  u16 if_id,
-+				  const struct dpdmux_accepted_frames *cfg);
-+
-+/**
-+ * struct dpdmux_if_attr - Structure representing frame types configuration
-+ * @rate: Configured interface rate (in bits per second)
-+ * @enabled: Indicates if interface is enabled
-+ * @accept_frame_type: Indicates type of accepted frames for the interface
-+ */
-+struct dpdmux_if_attr {
-+	u32 rate;
-+	int enabled;
-+	enum dpdmux_accepted_frames_type accept_frame_type;
-+};
-+
-+int dpdmux_if_get_attributes(struct fsl_mc_io *mc_io,
-+			     u32 cmd_flags,
-+			     u16 token,
-+			     u16 if_id,
-+			     struct dpdmux_if_attr *attr);
-+
-+int dpdmux_if_enable(struct fsl_mc_io *mc_io,
-+		     u32 cmd_flags,
-+		     u16 token,
-+		     u16 if_id);
-+
-+int dpdmux_if_disable(struct fsl_mc_io *mc_io,
-+		      u32 cmd_flags,
-+		      u16 token,
-+		      u16 if_id);
-+
-+/**
-+ * struct dpdmux_l2_rule - Structure representing L2 rule
-+ * @mac_addr: MAC address
-+ * @vlan_id: VLAN ID
-+ */
-+struct dpdmux_l2_rule {
-+	u8 mac_addr[6];
-+	u16 vlan_id;
-+};
-+
-+int dpdmux_if_remove_l2_rule(struct fsl_mc_io *mc_io,
-+			     u32 cmd_flags,
-+			     u16 token,
-+			     u16 if_id,
-+			     const struct dpdmux_l2_rule *rule);
-+
-+int dpdmux_if_add_l2_rule(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  u16 if_id,
-+			  const struct dpdmux_l2_rule *rule);
-+
-+int dpdmux_if_get_counter(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  u16 if_id,
-+			  enum dpdmux_counter_type counter_type,
-+			  u64 *counter);
-+
-+int dpdmux_ul_reset_counters(struct fsl_mc_io *mc_io,
-+			     u32 cmd_flags,
-+			     u16 token);
-+
-+/**
-+ * Enable auto-negotiation
-+ */
-+#define DPDMUX_LINK_OPT_AUTONEG		0x0000000000000001ULL
-+/**
-+ * Enable half-duplex mode
-+ */
-+#define DPDMUX_LINK_OPT_HALF_DUPLEX	0x0000000000000002ULL
-+/**
-+ * Enable pause frames
-+ */
-+#define DPDMUX_LINK_OPT_PAUSE		0x0000000000000004ULL
-+/**
-+ * Enable a-symmetric pause frames
-+ */
-+#define DPDMUX_LINK_OPT_ASYM_PAUSE	0x0000000000000008ULL
-+
-+/**
-+ * struct dpdmux_link_cfg - Structure representing DPDMUX link configuration
-+ * @rate: Rate
-+ * @options: Mask of available options; use 'DPDMUX_LINK_OPT_<X>' values
-+ */
-+struct dpdmux_link_cfg {
-+	u32 rate;
-+	u64 options;
-+};
-+
-+int dpdmux_if_set_link_cfg(struct fsl_mc_io *mc_io,
-+			   u32 cmd_flags,
-+			   u16 token,
-+			   u16 if_id,
-+			   struct dpdmux_link_cfg *cfg);
-+/**
-+ * struct dpdmux_link_state - Structure representing DPDMUX link state
-+ * @rate: Rate
-+ * @options: Mask of available options; use 'DPDMUX_LINK_OPT_<X>' values
-+ * @up: 0 - down, 1 - up
-+ */
-+struct dpdmux_link_state {
-+	u32 rate;
-+	u64 options;
-+	int      up;
-+};
-+
-+int dpdmux_if_get_link_state(struct fsl_mc_io *mc_io,
-+			     u32 cmd_flags,
-+			     u16 token,
-+			     u16 if_id,
-+			     struct dpdmux_link_state *state);
-+
-+int dpdmux_set_custom_key(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  u64 key_cfg_iova);
-+
-+/**
-+ * struct dpdmux_rule_cfg - Custom classification rule.
-+ *
-+ * @key_iova: DMA address of buffer storing the look-up value
-+ * @mask_iova: DMA address of the mask used for TCAM classification
-+ * @key_size: size, in bytes, of the look-up value. This must match the size
-+ *	of the look-up key defined using dpdmux_set_custom_key, otherwise the
-+ *	entry will never be hit
-+ */
-+struct dpdmux_rule_cfg {
-+	u64 key_iova;
-+	u64 mask_iova;
-+	u8 key_size;
-+};
-+
-+/**
-+ * struct dpdmux_cls_action - Action to execute for frames matching the
-+ *	classification entry
-+ *
-+ * @dest_if: Interface to forward the frames to. Port numbering is similar to
-+ *	the one used to connect interfaces:
-+ *	- 0 is the uplink port,
-+ *	- all others are downlink ports.
-+ */
-+struct dpdmux_cls_action {
-+	u16 dest_if;
-+};
-+
-+int dpdmux_add_custom_cls_entry(struct fsl_mc_io *mc_io,
-+				u32 cmd_flags,
-+				u16 token,
-+				struct dpdmux_rule_cfg *rule,
-+				struct dpdmux_cls_action *action);
-+
-+int dpdmux_remove_custom_cls_entry(struct fsl_mc_io *mc_io,
-+				   u32 cmd_flags,
-+				   u16 token,
-+				   struct dpdmux_rule_cfg *rule);
-+
-+int dpdmux_get_api_version(struct fsl_mc_io *mc_io,
-+			   u32 cmd_flags,
-+			   u16 *major_ver,
-+			   u16 *minor_ver);
-+
-+#endif /* __FSL_DPDMUX_H */
---- /dev/null
-+++ b/drivers/staging/fsl-dpaa2/evb/evb.c
-@@ -0,0 +1,1238 @@
-+/* Copyright 2015 Freescale Semiconductor Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+#include <linux/module.h>
-+#include <linux/msi.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/if_vlan.h>
-+
-+#include <uapi/linux/if_bridge.h>
-+#include <net/netlink.h>
-+
-+#include "../../fsl-mc/include/mc.h"
-+
-+#include "dpdmux.h"
-+#include "dpdmux-cmd.h"
-+
-+/* Minimal supported DPDMUX version */
-+#define DPDMUX_MIN_VER_MAJOR			6
-+#define DPDMUX_MIN_VER_MINOR			0
-+
-+/* IRQ index */
-+#define DPDMUX_MAX_IRQ_NUM			2
-+
-+/* MAX FRAME LENGTH (currently 10k) */
-+#define EVB_MAX_FRAME_LENGTH			(10 * 1024)
-+/* MIN FRAME LENGTH (64 bytes + 4 bytes CRC) */
-+#define EVB_MIN_FRAME_LENGTH			68
-+
-+struct evb_port_priv {
-+	struct net_device	*netdev;
-+	struct list_head	list;
-+	u16			port_index;
-+	struct evb_priv		*evb_priv;
-+	u8			vlans[VLAN_VID_MASK + 1];
-+};
-+
-+struct evb_priv {
-+	/* keep first */
-+	struct evb_port_priv	uplink;
-+
-+	struct fsl_mc_io	*mc_io;
-+	struct list_head	port_list;
-+	struct dpdmux_attr	attr;
-+	u16			mux_handle;
-+	int			dev_id;
-+};
-+
-+static int _evb_port_carrier_state_sync(struct net_device *netdev)
-+{
-+	struct evb_port_priv		*port_priv = netdev_priv(netdev);
-+	struct dpdmux_link_state	state;
-+	int err;
-+
-+	err = dpdmux_if_get_link_state(port_priv->evb_priv->mc_io, 0,
-+				       port_priv->evb_priv->mux_handle,
-+				       port_priv->port_index, &state);
-+	if (unlikely(err)) {
-+		netdev_err(netdev, "dpdmux_if_get_link_state() err %d\n", err);
-+		return err;
-+	}
-+
-+	WARN_ONCE(state.up > 1, "Garbage read into link_state");
-+
-+	if (state.up)
-+		netif_carrier_on(port_priv->netdev);
-+	else
-+		netif_carrier_off(port_priv->netdev);
-+
-+	return 0;
-+}
-+
-+static int evb_port_open(struct net_device *netdev)
-+{
-+	int			err;
-+
-+	/* FIXME: enable port when support added */
-+
-+	err = _evb_port_carrier_state_sync(netdev);
-+	if (err) {
-+		netdev_err(netdev, "ethsw_port_carrier_state_sync err %d\n",
-+			   err);
-+		return err;
-+	}
-+
-+	return 0;
-+}
-+
-+static netdev_tx_t evb_dropframe(struct sk_buff *skb, struct net_device *dev)
-+{
-+	/* we don't support I/O for now, drop the frame */
-+	dev_kfree_skb_any(skb);
-+	return NETDEV_TX_OK;
-+}
-+
-+static int evb_links_state_update(struct evb_priv *priv)
-+{
-+	struct evb_port_priv	*port_priv;
-+	struct list_head	*pos;
-+	int err;
-+
-+	list_for_each(pos, &priv->port_list) {
-+		port_priv = list_entry(pos, struct evb_port_priv, list);
-+
-+		err = _evb_port_carrier_state_sync(port_priv->netdev);
-+		if (err)
-+			netdev_err(port_priv->netdev,
-+				   "_evb_port_carrier_state_sync err %d\n",
-+				   err);
-+	}
-+
-+	return 0;
-+}
-+
-+static irqreturn_t evb_irq0_handler(int irq_num, void *arg)
-+{
-+	return IRQ_WAKE_THREAD;
-+}
-+
-+static irqreturn_t _evb_irq0_handler_thread(int irq_num, void *arg)
-+{
-+	struct device		*dev = (struct device *)arg;
-+	struct fsl_mc_device	*evb_dev = to_fsl_mc_device(dev);
-+	struct net_device	*netdev = dev_get_drvdata(dev);
-+	struct evb_priv		*priv = netdev_priv(netdev);
-+	struct fsl_mc_io	*io = priv->mc_io;
-+	u16 token = priv->mux_handle;
-+	int irq_index = DPDMUX_IRQ_INDEX_IF;
-+
-+	/* Mask the events and the if_id reserved bits to be cleared on read */
-+	u32 status = DPDMUX_IRQ_EVENT_LINK_CHANGED | 0xFFFF0000;
-+	int err;
-+
-+	/* Sanity check */
-+	if (WARN_ON(!evb_dev || !evb_dev->irqs || !evb_dev->irqs[irq_index]))
-+		goto out;
-+	if (WARN_ON(evb_dev->irqs[irq_index]->msi_desc->irq != irq_num))
-+		goto out;
-+
-+	err = dpdmux_get_irq_status(io, 0, token, irq_index, &status);
-+	if (unlikely(err)) {
-+		netdev_err(netdev, "Can't get irq status (err %d)", err);
-+		err = dpdmux_clear_irq_status(io, 0, token, irq_index,
-+					      0xFFFFFFFF);
-+		if (unlikely(err))
-+			netdev_err(netdev, "Can't clear irq status (err %d)",
-+				   err);
-+		goto out;
-+	}
-+
-+	if (status & DPDMUX_IRQ_EVENT_LINK_CHANGED) {
-+		err = evb_links_state_update(priv);
-+		if (unlikely(err))
-+			goto out;
-+	}
-+
-+out:
-+	return IRQ_HANDLED;
-+}
-+
-+static int evb_setup_irqs(struct fsl_mc_device *evb_dev)
-+{
-+	struct device		*dev = &evb_dev->dev;
-+	struct net_device	*netdev = dev_get_drvdata(dev);
-+	struct evb_priv		*priv = netdev_priv(netdev);
-+	int err = 0;
-+	struct fsl_mc_device_irq *irq;
-+	const int irq_index = DPDMUX_IRQ_INDEX_IF;
-+	u32 mask = DPDMUX_IRQ_EVENT_LINK_CHANGED;
-+
-+	err = fsl_mc_allocate_irqs(evb_dev);
-+	if (unlikely(err)) {
-+		dev_err(dev, "MC irqs allocation failed\n");
-+		return err;
-+	}
-+
-+	if (WARN_ON(evb_dev->obj_desc.irq_count != DPDMUX_MAX_IRQ_NUM)) {
-+		err = -EINVAL;
-+		goto free_irq;
-+	}
-+
-+	err = dpdmux_set_irq_enable(priv->mc_io, 0, priv->mux_handle,
-+				    irq_index, 0);
-+	if (unlikely(err)) {
-+		dev_err(dev, "dpdmux_set_irq_enable err %d\n", err);
-+		goto free_irq;
-+	}
-+
-+	irq = evb_dev->irqs[irq_index];
-+
-+	err = devm_request_threaded_irq(dev, irq->msi_desc->irq,
-+					evb_irq0_handler,
-+					_evb_irq0_handler_thread,
-+					IRQF_NO_SUSPEND | IRQF_ONESHOT,
-+					dev_name(dev), dev);
-+	if (unlikely(err)) {
-+		dev_err(dev, "devm_request_threaded_irq(): %d", err);
-+		goto free_irq;
-+	}
-+
-+	err = dpdmux_set_irq_mask(priv->mc_io, 0, priv->mux_handle,
-+				  irq_index, mask);
-+	if (unlikely(err)) {
-+		dev_err(dev, "dpdmux_set_irq_mask(): %d", err);
-+		goto free_devm_irq;
-+	}
-+
-+	err = dpdmux_set_irq_enable(priv->mc_io, 0, priv->mux_handle,
-+				    irq_index, 1);
-+	if (unlikely(err)) {
-+		dev_err(dev, "dpdmux_set_irq_enable(): %d", err);
-+		goto free_devm_irq;
-+	}
-+
-+	return 0;
-+
-+free_devm_irq:
-+	devm_free_irq(dev, irq->msi_desc->irq, dev);
-+free_irq:
-+	fsl_mc_free_irqs(evb_dev);
-+	return err;
-+}
-+
-+static void evb_teardown_irqs(struct fsl_mc_device *evb_dev)
-+{
-+	struct device		*dev = &evb_dev->dev;
-+	struct net_device	*netdev = dev_get_drvdata(dev);
-+	struct evb_priv		*priv = netdev_priv(netdev);
-+
-+	dpdmux_set_irq_enable(priv->mc_io, 0, priv->mux_handle,
-+			      DPDMUX_IRQ_INDEX_IF, 0);
-+
-+	devm_free_irq(dev,
-+		      evb_dev->irqs[DPDMUX_IRQ_INDEX_IF]->msi_desc->irq,
-+		      dev);
-+	fsl_mc_free_irqs(evb_dev);
-+}
-+
-+static int evb_port_add_rule(struct net_device *netdev,
-+			     const unsigned char *addr, u16 vid)
-+{
-+	struct evb_port_priv	*port_priv = netdev_priv(netdev);
-+	struct dpdmux_l2_rule	rule = { .vlan_id = vid };
-+	int			err;
-+
-+	if (addr)
-+		ether_addr_copy(rule.mac_addr, addr);
-+
-+	err = dpdmux_if_add_l2_rule(port_priv->evb_priv->mc_io,
-+				    0,
-+				    port_priv->evb_priv->mux_handle,
-+				    port_priv->port_index, &rule);
-+	if (unlikely(err))
-+		netdev_err(netdev, "dpdmux_if_add_l2_rule err %d\n", err);
-+	return err;
-+}
-+
-+static int evb_port_del_rule(struct net_device *netdev,
-+			     const unsigned char *addr, u16 vid)
-+{
-+	struct evb_port_priv	*port_priv = netdev_priv(netdev);
-+	struct dpdmux_l2_rule	rule = { .vlan_id = vid };
-+	int err;
-+
-+	if (addr)
-+		ether_addr_copy(rule.mac_addr, addr);
-+
-+	err = dpdmux_if_remove_l2_rule(port_priv->evb_priv->mc_io,
-+				       0,
-+				       port_priv->evb_priv->mux_handle,
-+				       port_priv->port_index, &rule);
-+	if (unlikely(err))
-+		netdev_err(netdev, "dpdmux_if_remove_l2_rule err %d\n", err);
-+	return err;
-+}
-+
-+static bool _lookup_address(struct net_device *netdev,
-+			    const unsigned char *addr)
-+{
-+	struct netdev_hw_addr	   *ha;
-+	struct netdev_hw_addr_list *list = (is_unicast_ether_addr(addr)) ?
-+					   &netdev->uc : &netdev->mc;
-+
-+	netif_addr_lock_bh(netdev);
-+	list_for_each_entry(ha, &list->list, list) {
-+		if (ether_addr_equal(ha->addr, addr)) {
-+			netif_addr_unlock_bh(netdev);
-+			return true;
-+		}
-+	}
-+	netif_addr_unlock_bh(netdev);
-+	return false;
-+}
-+
-+static inline int evb_port_fdb_prep(struct nlattr *tb[],
-+				    struct net_device *netdev,
-+				    const unsigned char *addr, u16 *vid,
-+				    bool del)
-+{
-+	struct evb_port_priv	*port_priv = netdev_priv(netdev);
-+	struct evb_priv		*evb_priv = port_priv->evb_priv;
-+
-+	*vid = 0;
-+
-+	if (evb_priv->attr.method != DPDMUX_METHOD_MAC &&
-+	    evb_priv->attr.method != DPDMUX_METHOD_C_VLAN_MAC) {
-+		netdev_err(netdev,
-+			   "EVB mode does not support MAC classification\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	/* check if the address is configured on this port */
-+	if (_lookup_address(netdev, addr)) {
-+		if (!del)
-+			return -EEXIST;
-+	} else {
-+		if (del)
-+			return -ENOENT;
-+	}
-+
-+	if (tb[NDA_VLAN] && evb_priv->attr.method == DPDMUX_METHOD_C_VLAN_MAC) {
-+		if (nla_len(tb[NDA_VLAN]) != sizeof(unsigned short)) {
-+			netdev_err(netdev, "invalid vlan size %d\n",
-+				   nla_len(tb[NDA_VLAN]));
-+			return -EINVAL;
-+		}
-+
-+		*vid = nla_get_u16(tb[NDA_VLAN]);
-+
-+		if (!*vid || *vid >= VLAN_VID_MASK) {
-+			netdev_err(netdev, "invalid vid value 0x%04x\n", *vid);
-+			return -EINVAL;
-+		}
-+	} else if (evb_priv->attr.method == DPDMUX_METHOD_C_VLAN_MAC) {
-+		netdev_err(netdev,
-+			   "EVB mode requires explicit VLAN configuration\n");
-+		return -EINVAL;
-+	} else if (tb[NDA_VLAN]) {
-+		netdev_warn(netdev, "VLAN not supported, argument ignored\n");
-+	}
-+
-+	return 0;
-+}
-+
-+static int evb_port_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
-+			    struct net_device *netdev,
-+			    const unsigned char *addr, u16 vid, u16 flags,
-+			    struct netlink_ext_ack *extack)
-+{
-+	u16 _vid;
-+	int err;
-+
-+	/* TODO: add replace support when added to iproute bridge */
-+	if (!(flags & NLM_F_REQUEST)) {
-+		netdev_err(netdev,
-+			   "evb_port_fdb_add unexpected flags value %08x\n",
-+			   flags);
-+		return -EINVAL;
-+	}
-+
-+	err = evb_port_fdb_prep(tb, netdev, addr, &_vid, 0);
-+	if (unlikely(err))
-+		return err;
-+
-+	err = evb_port_add_rule(netdev, addr, _vid);
-+	if (unlikely(err))
-+		return err;
-+
-+	if (is_unicast_ether_addr(addr)) {
-+		err = dev_uc_add(netdev, addr);
-+		if (unlikely(err)) {
-+			netdev_err(netdev, "dev_uc_add err %d\n", err);
-+			return err;
-+		}
-+	} else {
-+		err = dev_mc_add(netdev, addr);
-+		if (unlikely(err)) {
-+			netdev_err(netdev, "dev_mc_add err %d\n", err);
-+			return err;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static int evb_port_fdb_del(struct ndmsg *ndm, struct nlattr *tb[],
-+			    struct net_device *netdev,
-+			    const unsigned char *addr, u16 vid)
-+{
-+	u16 _vid;
-+	int err;
-+
-+	err = evb_port_fdb_prep(tb, netdev, addr, &_vid, 1);
-+	if (unlikely(err))
-+		return err;
-+
-+	err = evb_port_del_rule(netdev, addr, _vid);
-+	if (unlikely(err))
-+		return err;
-+
-+	if (is_unicast_ether_addr(addr)) {
-+		err = dev_uc_del(netdev, addr);
-+		if (unlikely(err)) {
-+			netdev_err(netdev, "dev_uc_del err %d\n", err);
-+			return err;
-+		}
-+	} else {
-+		err = dev_mc_del(netdev, addr);
-+		if (unlikely(err)) {
-+			netdev_err(netdev, "dev_mc_del err %d\n", err);
-+			return err;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static int evb_change_mtu(struct net_device *netdev,
-+			  int mtu)
-+{
-+	struct evb_port_priv	*port_priv = netdev_priv(netdev);
-+	struct evb_priv		*evb_priv = port_priv->evb_priv;
-+	struct list_head	*pos;
-+	int			err = 0;
-+
-+	/* This operation is not permitted on downlinks */
-+	if (port_priv->port_index > 0)
-+		return -EPERM;
-+
-+	if (mtu < EVB_MIN_FRAME_LENGTH || mtu > EVB_MAX_FRAME_LENGTH) {
-+		netdev_err(netdev, "Invalid MTU %d. Valid range is: %d..%d\n",
-+			   mtu, EVB_MIN_FRAME_LENGTH, EVB_MAX_FRAME_LENGTH);
-+		return -EINVAL;
-+	}
-+
-+	err = dpdmux_set_max_frame_length(evb_priv->mc_io,
-+					  0,
-+					  evb_priv->mux_handle,
-+					  (uint16_t)mtu);
-+
-+	if (unlikely(err)) {
-+		netdev_err(netdev, "dpdmux_ul_set_max_frame_length err %d\n",
-+			   err);
-+		return err;
-+	}
-+
-+	/* Update the max frame length for downlinks */
-+	list_for_each(pos, &evb_priv->port_list) {
-+		port_priv = list_entry(pos, struct evb_port_priv, list);
-+		port_priv->netdev->mtu = mtu;
-+	}
-+
-+	netdev->mtu = mtu;
-+	return 0;
-+}
-+
-+static const struct nla_policy ifla_br_policy[IFLA_MAX + 1] = {
-+	[IFLA_BRIDGE_FLAGS]	= { .type = NLA_U16 },
-+	[IFLA_BRIDGE_MODE]	= { .type = NLA_U16 },
-+	[IFLA_BRIDGE_VLAN_INFO]	= { .type = NLA_BINARY,
-+				.len = sizeof(struct bridge_vlan_info), },
-+};
-+
-+static int evb_setlink_af_spec(struct net_device *netdev,
-+			       struct nlattr **tb)
-+{
-+	struct bridge_vlan_info	*vinfo;
-+	struct evb_port_priv	*port_priv = netdev_priv(netdev);
-+	int			err = 0;
-+
-+	if (!tb[IFLA_BRIDGE_VLAN_INFO]) {
-+		netdev_err(netdev, "no VLAN INFO in nlmsg\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	vinfo = nla_data(tb[IFLA_BRIDGE_VLAN_INFO]);
-+
-+	if (!vinfo->vid || vinfo->vid > VLAN_VID_MASK)
-+		return -EINVAL;
-+
-+	err = evb_port_add_rule(netdev, NULL, vinfo->vid);
-+	if (unlikely(err))
-+		return err;
-+
-+	port_priv->vlans[vinfo->vid] = 1;
-+
-+	return 0;
-+}
-+
-+static int evb_setlink(struct net_device *netdev,
-+		       struct nlmsghdr *nlh,
-+		       u16 flags,
-+		       struct netlink_ext_ack *extack)
-+{
-+	struct evb_port_priv	*port_priv = netdev_priv(netdev);
-+	struct evb_priv		*evb_priv = port_priv->evb_priv;
-+	struct nlattr		*attr;
-+	struct nlattr		*tb[(IFLA_BRIDGE_MAX > IFLA_BRPORT_MAX) ?
-+					IFLA_BRIDGE_MAX : IFLA_BRPORT_MAX + 1];
-+	int			err = 0;
-+
-+	if (evb_priv->attr.method != DPDMUX_METHOD_C_VLAN &&
-+	    evb_priv->attr.method != DPDMUX_METHOD_S_VLAN) {
-+		netdev_err(netdev,
-+			   "EVB mode does not support VLAN only classification\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	attr = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
-+	if (attr) {
-+		err = nla_parse_nested(tb, IFLA_BRIDGE_MAX, attr,
-+				       ifla_br_policy);
-+		if (unlikely(err)) {
-+			netdev_err(netdev,
-+				   "nla_parse_nested for br_policy err %d\n",
-+				   err);
-+			return err;
-+		}
-+
-+		err = evb_setlink_af_spec(netdev, tb);
-+		return err;
-+	}
-+
-+	netdev_err(netdev, "nlmsg_find_attr found no AF_SPEC\n");
-+	return -EOPNOTSUPP;
-+}
-+
-+static int __nla_put_netdev(struct sk_buff *skb, struct net_device *netdev)
-+{
-+	struct evb_port_priv	*port_priv = netdev_priv(netdev);
-+	struct evb_priv		*evb_priv = port_priv->evb_priv;
-+	u8			operstate = netif_running(netdev) ?
-+				netdev->operstate : IF_OPER_DOWN;
-+	int			iflink;
-+	int			err;
-+
-+	err = nla_put_string(skb, IFLA_IFNAME, netdev->name);
-+	if (unlikely(err))
-+		goto nla_put_err;
-+	err = nla_put_u32(skb, IFLA_MASTER, evb_priv->uplink.netdev->ifindex);
-+	if (unlikely(err))
-+		goto nla_put_err;
-+	err = nla_put_u32(skb, IFLA_MTU, netdev->mtu);
-+	if (unlikely(err))
-+		goto nla_put_err;
-+	err = nla_put_u8(skb, IFLA_OPERSTATE, operstate);
-+	if (unlikely(err))
-+		goto nla_put_err;
-+	if (netdev->addr_len) {
-+		err = nla_put(skb, IFLA_ADDRESS, netdev->addr_len,
-+			      netdev->dev_addr);
-+		if (unlikely(err))
-+			goto nla_put_err;
-+	}
-+
-+	iflink = dev_get_iflink(netdev);
-+	if (netdev->ifindex != iflink) {
-+		err = nla_put_u32(skb, IFLA_LINK, iflink);
-+		if (unlikely(err))
-+			goto nla_put_err;
-+	}
-+
-+	return 0;
-+
-+nla_put_err:
-+	netdev_err(netdev, "nla_put_ err %d\n", err);
-+	return err;
-+}
-+
-+static int __nla_put_port(struct sk_buff *skb, struct net_device *netdev)
-+{
-+	struct nlattr	*nest;
-+	int		err;
-+
-+	nest = nla_nest_start(skb, IFLA_PROTINFO | NLA_F_NESTED);
-+	if (!nest) {
-+		netdev_err(netdev, "nla_nest_start failed\n");
-+		return -ENOMEM;
-+	}
-+
-+	err = nla_put_u8(skb, IFLA_BRPORT_STATE, BR_STATE_FORWARDING);
-+	if (unlikely(err))
-+		goto nla_put_err;
-+	err = nla_put_u16(skb, IFLA_BRPORT_PRIORITY, 0);
-+	if (unlikely(err))
-+		goto nla_put_err;
-+	err = nla_put_u32(skb, IFLA_BRPORT_COST, 0);
-+	if (unlikely(err))
-+		goto nla_put_err;
-+	err = nla_put_u8(skb, IFLA_BRPORT_MODE, 0);
-+	if (unlikely(err))
-+		goto nla_put_err;
-+	err = nla_put_u8(skb, IFLA_BRPORT_GUARD, 0);
-+	if (unlikely(err))
-+		goto nla_put_err;
-+	err = nla_put_u8(skb, IFLA_BRPORT_PROTECT, 0);
-+	if (unlikely(err))
-+		goto nla_put_err;
-+	err = nla_put_u8(skb, IFLA_BRPORT_FAST_LEAVE, 0);
-+	if (unlikely(err))
-+		goto nla_put_err;
-+	err = nla_put_u8(skb, IFLA_BRPORT_LEARNING, 0);
-+	if (unlikely(err))
-+		goto nla_put_err;
-+	err = nla_put_u8(skb, IFLA_BRPORT_UNICAST_FLOOD, 1);
-+	if (unlikely(err))
-+		goto nla_put_err;
-+	nla_nest_end(skb, nest);
-+
-+	return 0;
-+
-+nla_put_err:
-+	netdev_err(netdev, "nla_put_ err %d\n", err);
-+	nla_nest_cancel(skb, nest);
-+	return err;
-+}
-+
-+static int __nla_put_vlan(struct sk_buff *skb,  struct net_device *netdev)
-+{
-+	struct evb_port_priv	*port_priv = netdev_priv(netdev);
-+	struct nlattr		*nest;
-+	struct bridge_vlan_info	vinfo;
-+	const u8		*vlans = port_priv->vlans;
-+	u16			i;
-+	int			err;
-+
-+	nest = nla_nest_start(skb, IFLA_AF_SPEC);
-+	if (!nest) {
-+		netdev_err(netdev, "nla_nest_start failed");
-+		return -ENOMEM;
-+	}
-+
-+	for (i = 0; i < VLAN_VID_MASK + 1; i++) {
-+		if (!vlans[i])
-+			continue;
-+
-+		vinfo.flags = 0;
-+		vinfo.vid = i;
-+
-+		err = nla_put(skb, IFLA_BRIDGE_VLAN_INFO,
-+			      sizeof(vinfo), &vinfo);
-+		if (unlikely(err))
-+			goto nla_put_err;
-+	}
-+
-+	nla_nest_end(skb, nest);
-+
-+	return 0;
-+
-+nla_put_err:
-+	netdev_err(netdev, "nla_put_ err %d\n", err);
-+	nla_nest_cancel(skb, nest);
-+	return err;
-+}
-+
-+static int evb_getlink(struct sk_buff *skb, u32 pid, u32 seq,
-+		       struct net_device *netdev, u32 filter_mask, int nlflags)
-+{
-+	struct evb_port_priv	*port_priv = netdev_priv(netdev);
-+	struct evb_priv		*evb_priv = port_priv->evb_priv;
-+	struct ifinfomsg	*hdr;
-+	struct nlmsghdr		*nlh;
-+	int			err;
-+
-+	if (evb_priv->attr.method != DPDMUX_METHOD_C_VLAN &&
-+	    evb_priv->attr.method != DPDMUX_METHOD_S_VLAN) {
-+		return 0;
-+	}
-+
-+	nlh = nlmsg_put(skb, pid, seq, RTM_NEWLINK, sizeof(*hdr), NLM_F_MULTI);
-+	if (!nlh)
-+		return -EMSGSIZE;
-+
-+	hdr = nlmsg_data(nlh);
-+	memset(hdr, 0, sizeof(*hdr));
-+	hdr->ifi_family = AF_BRIDGE;
-+	hdr->ifi_type = netdev->type;
-+	hdr->ifi_index = netdev->ifindex;
-+	hdr->ifi_flags = dev_get_flags(netdev);
-+
-+	err = __nla_put_netdev(skb, netdev);
-+	if (unlikely(err))
-+		goto nla_put_err;
-+
-+	err = __nla_put_port(skb, netdev);
-+	if (unlikely(err))
-+		goto nla_put_err;
-+
-+	/* Check if the VID information is requested */
-+	if (filter_mask & RTEXT_FILTER_BRVLAN) {
-+		err = __nla_put_vlan(skb, netdev);
-+		if (unlikely(err))
-+			goto nla_put_err;
-+	}
-+
-+	nlmsg_end(skb, nlh);
-+	return skb->len;
-+
-+nla_put_err:
-+	nlmsg_cancel(skb, nlh);
-+	return -EMSGSIZE;
-+}
-+
-+static int evb_dellink(struct net_device *netdev,
-+		       struct nlmsghdr *nlh,
-+		       u16 flags)
-+{
-+	struct nlattr		*tb[IFLA_BRIDGE_MAX + 1];
-+	struct nlattr		*spec;
-+	struct bridge_vlan_info	*vinfo;
-+	struct evb_port_priv	*port_priv = netdev_priv(netdev);
-+	int			err = 0;
-+
-+	spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
-+	if (!spec)
-+		return 0;
-+
-+	err = nla_parse_nested(tb, IFLA_BRIDGE_MAX, spec, ifla_br_policy);
-+	if (unlikely(err))
-+		return err;
-+
-+	if (!tb[IFLA_BRIDGE_VLAN_INFO])
-+		return -EOPNOTSUPP;
-+
-+	vinfo = nla_data(tb[IFLA_BRIDGE_VLAN_INFO]);
-+
-+	if (!vinfo->vid || vinfo->vid > VLAN_VID_MASK)
-+		return -EINVAL;
-+
-+	err = evb_port_del_rule(netdev, NULL, vinfo->vid);
-+	if (unlikely(err)) {
-+		netdev_err(netdev, "evb_port_del_rule err %d\n", err);
-+		return err;
-+	}
-+	port_priv->vlans[vinfo->vid] = 0;
-+
-+	return 0;
-+}
-+
-+void evb_port_get_stats(struct net_device *netdev,
-+			struct rtnl_link_stats64 *storage)
-+{
-+	struct evb_port_priv	*port_priv = netdev_priv(netdev);
-+	u64			tmp;
-+	int			err;
-+
-+	err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io,
-+				    0,
-+				    port_priv->evb_priv->mux_handle,
-+				    port_priv->port_index,
-+				    DPDMUX_CNT_ING_FRAME, &storage->rx_packets);
-+	if (unlikely(err))
-+		goto error;
-+
-+	err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io,
-+				    0,
-+				    port_priv->evb_priv->mux_handle,
-+				    port_priv->port_index,
-+				    DPDMUX_CNT_ING_BYTE, &storage->rx_bytes);
-+	if (unlikely(err))
-+		goto error;
-+
-+	err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io,
-+				    0,
-+				    port_priv->evb_priv->mux_handle,
-+				    port_priv->port_index,
-+				    DPDMUX_CNT_ING_FLTR_FRAME, &tmp);
-+	if (unlikely(err))
-+		goto error;
-+
-+	err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io,
-+				    0,
-+				    port_priv->evb_priv->mux_handle,
-+				    port_priv->port_index,
-+				    DPDMUX_CNT_ING_FRAME_DISCARD,
-+				    &storage->rx_dropped);
-+	if (unlikely(err)) {
-+		storage->rx_dropped = tmp;
-+		goto error;
-+	}
-+	storage->rx_dropped += tmp;
-+
-+	err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io,
-+				    0,
-+				    port_priv->evb_priv->mux_handle,
-+				    port_priv->port_index,
-+				    DPDMUX_CNT_ING_MCAST_FRAME,
-+				    &storage->multicast);
-+	if (unlikely(err))
-+		goto error;
-+
-+	err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io,
-+				    0,
-+				    port_priv->evb_priv->mux_handle,
-+				    port_priv->port_index,
-+				    DPDMUX_CNT_EGR_FRAME, &storage->tx_packets);
-+	if (unlikely(err))
-+		goto error;
-+
-+	err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io,
-+				    0,
-+				    port_priv->evb_priv->mux_handle,
-+				    port_priv->port_index,
-+				    DPDMUX_CNT_EGR_BYTE, &storage->tx_bytes);
-+	if (unlikely(err))
-+		goto error;
-+
-+	err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io,
-+				    0,
-+				    port_priv->evb_priv->mux_handle,
-+				    port_priv->port_index,
-+				    DPDMUX_CNT_EGR_FRAME_DISCARD,
-+				    &storage->tx_dropped);
-+	if (unlikely(err))
-+		goto error;
-+
-+	return;
-+
-+error:
-+	netdev_err(netdev, "dpdmux_if_get_counter err %d\n", err);
-+}
-+
-+static const struct net_device_ops evb_port_ops = {
-+	.ndo_open		= &evb_port_open,
-+
-+	.ndo_start_xmit		= &evb_dropframe,
-+
-+	.ndo_fdb_add		= &evb_port_fdb_add,
-+	.ndo_fdb_del		= &evb_port_fdb_del,
-+
-+	.ndo_get_stats64	= &evb_port_get_stats,
-+	.ndo_change_mtu		= &evb_change_mtu,
-+};
-+
-+static struct {
-+	enum dpdmux_counter_type id;
-+	char name[ETH_GSTRING_LEN];
-+} evb_ethtool_counters[] =  {
-+	{DPDMUX_CNT_ING_FRAME,		"rx frames"},
-+	{DPDMUX_CNT_ING_BYTE,		"rx bytes"},
-+	{DPDMUX_CNT_ING_FLTR_FRAME,	"rx filtered frames"},
-+	{DPDMUX_CNT_ING_FRAME_DISCARD,	"rx discarded frames"},
-+	{DPDMUX_CNT_ING_BCAST_FRAME,	"rx b-cast frames"},
-+	{DPDMUX_CNT_ING_BCAST_BYTES,	"rx b-cast bytes"},
-+	{DPDMUX_CNT_ING_MCAST_FRAME,	"rx m-cast frames"},
-+	{DPDMUX_CNT_ING_MCAST_BYTE,	"rx m-cast bytes"},
-+	{DPDMUX_CNT_EGR_FRAME,		"tx frames"},
-+	{DPDMUX_CNT_EGR_BYTE,		"tx bytes"},
-+	{DPDMUX_CNT_EGR_FRAME_DISCARD,	"tx discarded frames"},
-+};
-+
-+static int evb_ethtool_get_sset_count(struct net_device *dev, int sset)
-+{
-+	switch (sset) {
-+	case ETH_SS_STATS:
-+		return ARRAY_SIZE(evb_ethtool_counters);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
-+static void evb_ethtool_get_strings(struct net_device *netdev,
-+				    u32 stringset, u8 *data)
-+{
-+	int i;
-+
-+	switch (stringset) {
-+	case ETH_SS_STATS:
-+		for (i = 0; i < ARRAY_SIZE(evb_ethtool_counters); i++)
-+			memcpy(data + i * ETH_GSTRING_LEN,
-+			       evb_ethtool_counters[i].name, ETH_GSTRING_LEN);
-+		break;
-+	}
-+}
-+
-+static void evb_ethtool_get_stats(struct net_device *netdev,
-+				  struct ethtool_stats *stats,
-+				  u64 *data)
-+{
-+	struct evb_port_priv	*port_priv = netdev_priv(netdev);
-+	int			i;
-+	int			err;
-+
-+	for (i = 0; i < ARRAY_SIZE(evb_ethtool_counters); i++) {
-+		err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io,
-+					    0,
-+					    port_priv->evb_priv->mux_handle,
-+					    port_priv->port_index,
-+					    evb_ethtool_counters[i].id,
-+					    &data[i]);
-+		if (err)
-+			netdev_err(netdev, "dpdmux_if_get_counter[%s] err %d\n",
-+				   evb_ethtool_counters[i].name, err);
-+	}
-+}
-+
-+static const struct ethtool_ops evb_port_ethtool_ops = {
-+	.get_strings		= &evb_ethtool_get_strings,
-+	.get_ethtool_stats	= &evb_ethtool_get_stats,
-+	.get_sset_count		= &evb_ethtool_get_sset_count,
-+};
-+
-+static int evb_open(struct net_device *netdev)
-+{
-+	struct evb_priv	*priv = netdev_priv(netdev);
-+	int		err = 0;
-+
-+	err = dpdmux_enable(priv->mc_io, 0, priv->mux_handle);
-+	if (unlikely(err))
-+		netdev_err(netdev, "dpdmux_enable err %d\n", err);
-+
-+	return err;
-+}
-+
-+static int evb_close(struct net_device *netdev)
-+{
-+	struct evb_priv	*priv = netdev_priv(netdev);
-+	int		err = 0;
-+
-+	err = dpdmux_disable(priv->mc_io, 0, priv->mux_handle);
-+	if (unlikely(err))
-+		netdev_err(netdev, "dpdmux_disable err %d\n", err);
-+
-+	return err;
-+}
-+
-+static const struct net_device_ops evb_ops = {
-+	.ndo_start_xmit		= &evb_dropframe,
-+	.ndo_open		= &evb_open,
-+	.ndo_stop		= &evb_close,
-+
-+	.ndo_bridge_setlink	= &evb_setlink,
-+	.ndo_bridge_getlink	= &evb_getlink,
-+	.ndo_bridge_dellink	= &evb_dellink,
-+
-+	.ndo_get_stats64	= &evb_port_get_stats,
-+	.ndo_change_mtu		= &evb_change_mtu,
-+};
-+
-+static int evb_takedown(struct fsl_mc_device *evb_dev)
-+{
-+	struct device		*dev = &evb_dev->dev;
-+	struct net_device	*netdev = dev_get_drvdata(dev);
-+	struct evb_priv		*priv = netdev_priv(netdev);
-+	int			err;
-+
-+	err = dpdmux_close(priv->mc_io, 0, priv->mux_handle);
-+	if (unlikely(err))
-+		dev_warn(dev, "dpdmux_close err %d\n", err);
-+
-+	return 0;
-+}
-+
-+static int evb_init(struct fsl_mc_device *evb_dev)
-+{
-+	struct device		*dev = &evb_dev->dev;
-+	struct net_device	*netdev = dev_get_drvdata(dev);
-+	struct evb_priv		*priv = netdev_priv(netdev);
-+	u16			version_major;
-+	u16			version_minor;
-+	int			err = 0;
-+
-+	priv->dev_id = evb_dev->obj_desc.id;
-+
-+	err = dpdmux_open(priv->mc_io, 0, priv->dev_id, &priv->mux_handle);
-+	if (unlikely(err)) {
-+		dev_err(dev, "dpdmux_open err %d\n", err);
-+		goto err_exit;
-+	}
-+	if (!priv->mux_handle) {
-+		dev_err(dev, "dpdmux_open returned null handle but no error\n");
-+		err = -EFAULT;
-+		goto err_exit;
-+	}
-+
-+	err = dpdmux_get_attributes(priv->mc_io, 0, priv->mux_handle,
-+				    &priv->attr);
-+	if (unlikely(err)) {
-+		dev_err(dev, "dpdmux_get_attributes err %d\n", err);
-+		goto err_close;
-+	}
-+
-+	err = dpdmux_get_api_version(priv->mc_io, 0,
-+				     &version_major,
-+				     &version_minor);
-+	if (unlikely(err)) {
-+		dev_err(dev, "dpdmux_get_api_version err %d\n", err);
-+		goto err_close;
-+	}
-+
-+	/* Minimum supported DPDMUX version check */
-+	if (version_major < DPDMUX_MIN_VER_MAJOR ||
-+	    (version_major == DPDMUX_MIN_VER_MAJOR &&
-+	     version_minor < DPDMUX_MIN_VER_MINOR)) {
-+		dev_err(dev, "DPDMUX version %d.%d not supported. Use %d.%d or greater.\n",
-+			version_major, version_minor,
-+			DPDMUX_MIN_VER_MAJOR, DPDMUX_MIN_VER_MAJOR);
-+		err = -ENOTSUPP;
-+		goto err_close;
-+	}
-+
-+	err = dpdmux_reset(priv->mc_io, 0, priv->mux_handle);
-+	if (unlikely(err)) {
-+		dev_err(dev, "dpdmux_reset err %d\n", err);
-+		goto err_close;
-+	}
-+
-+	return 0;
-+
-+err_close:
-+	dpdmux_close(priv->mc_io, 0, priv->mux_handle);
-+err_exit:
-+	return err;
-+}
-+
-+static int evb_remove(struct fsl_mc_device *evb_dev)
-+{
-+	struct device		*dev = &evb_dev->dev;
-+	struct net_device	*netdev = dev_get_drvdata(dev);
-+	struct evb_priv		*priv = netdev_priv(netdev);
-+	struct evb_port_priv	*port_priv;
-+	struct list_head	*pos;
-+
-+	list_for_each(pos, &priv->port_list) {
-+		port_priv = list_entry(pos, struct evb_port_priv, list);
-+
-+		rtnl_lock();
-+		netdev_upper_dev_unlink(port_priv->netdev, netdev);
-+		rtnl_unlock();
-+
-+		unregister_netdev(port_priv->netdev);
-+		free_netdev(port_priv->netdev);
-+	}
-+
-+	evb_teardown_irqs(evb_dev);
-+
-+	unregister_netdev(netdev);
-+
-+	evb_takedown(evb_dev);
-+	fsl_mc_portal_free(priv->mc_io);
-+
-+	dev_set_drvdata(dev, NULL);
-+	free_netdev(netdev);
-+
-+	return 0;
-+}
-+
-+static int evb_probe(struct fsl_mc_device *evb_dev)
-+{
-+	struct device		*dev;
-+	struct evb_priv		*priv = NULL;
-+	struct net_device	*netdev = NULL;
-+	char			port_name[IFNAMSIZ];
-+	int			i;
-+	int			err = 0;
-+
-+	dev = &evb_dev->dev;
-+
-+	/* register switch device, it's for management only - no I/O */
-+	netdev = alloc_etherdev(sizeof(*priv));
-+	if (!netdev) {
-+		dev_err(dev, "alloc_etherdev error\n");
-+		return -ENOMEM;
-+	}
-+	netdev->netdev_ops = &evb_ops;
-+
-+	dev_set_drvdata(dev, netdev);
-+
-+	priv = netdev_priv(netdev);
-+
-+	err = fsl_mc_portal_allocate(evb_dev, 0, &priv->mc_io);
-+	if (unlikely(err)) {
-+		dev_err(dev, "fsl_mc_portal_allocate err %d\n", err);
-+		goto err_free_netdev;
-+	}
-+	if (!priv->mc_io) {
-+		dev_err(dev, "fsl_mc_portal_allocate returned null handle but no error\n");
-+		err = -EFAULT;
-+		goto err_free_netdev;
-+	}
-+
-+	err = evb_init(evb_dev);
-+	if (unlikely(err)) {
-+		dev_err(dev, "evb init err %d\n", err);
-+		goto err_free_cmdport;
-+	}
-+
-+	INIT_LIST_HEAD(&priv->port_list);
-+	netdev->flags |= IFF_PROMISC | IFF_MASTER;
-+
-+	dev_alloc_name(netdev, "evb%d");
-+
-+	/* register switch ports */
-+	snprintf(port_name, IFNAMSIZ, "%sp%%d", netdev->name);
-+
-+	/* only register downlinks? */
-+	for (i = 0; i < priv->attr.num_ifs + 1; i++) {
-+		struct net_device *port_netdev;
-+		struct evb_port_priv *port_priv;
-+
-+		if (i) {
-+			port_netdev =
-+				alloc_etherdev(sizeof(struct evb_port_priv));
-+			if (!port_netdev) {
-+				dev_err(dev, "alloc_etherdev error\n");
-+				goto err_takedown;
-+			}
-+
-+			port_priv = netdev_priv(port_netdev);
-+
-+			port_netdev->flags |= IFF_PROMISC | IFF_SLAVE;
-+
-+			dev_alloc_name(port_netdev, port_name);
-+		} else {
-+			port_netdev = netdev;
-+			port_priv = &priv->uplink;
-+		}
-+
-+		port_priv->netdev = port_netdev;
-+		port_priv->evb_priv = priv;
-+		port_priv->port_index = i;
-+
-+		SET_NETDEV_DEV(port_netdev, dev);
-+
-+		if (i) {
-+			port_netdev->netdev_ops = &evb_port_ops;
-+
-+			err = register_netdev(port_netdev);
-+			if (err < 0) {
-+				dev_err(dev, "register_netdev err %d\n", err);
-+				free_netdev(port_netdev);
-+				goto err_takedown;
-+			}
-+
-+			rtnl_lock();
-+			err = netdev_master_upper_dev_link(port_netdev, netdev,
-+							   NULL, NULL);
-+			if (unlikely(err)) {
-+				dev_err(dev, "netdev_master_upper_dev_link err %d\n",
-+					err);
-+				unregister_netdev(port_netdev);
-+				free_netdev(port_netdev);
-+				rtnl_unlock();
-+				goto err_takedown;
-+			}
-+			rtmsg_ifinfo(RTM_NEWLINK, port_netdev,
-+				     IFF_SLAVE, GFP_KERNEL);
-+			rtnl_unlock();
-+
-+			list_add(&port_priv->list, &priv->port_list);
-+		} else {
-+			err = register_netdev(netdev);
-+
-+			if (err < 0) {
-+				dev_err(dev, "register_netdev error %d\n", err);
-+				goto err_takedown;
-+			}
-+		}
-+
-+		port_netdev->ethtool_ops = &evb_port_ethtool_ops;
-+
-+		/* ports are up from init */
-+		rtnl_lock();
-+		err = dev_open(port_netdev, NULL);
-+		rtnl_unlock();
-+		if (unlikely(err))
-+			dev_warn(dev, "dev_open err %d\n", err);
-+	}
-+
-+	/* setup irqs */
-+	err = evb_setup_irqs(evb_dev);
-+	if (unlikely(err)) {
-+		dev_warn(dev, "evb_setup_irqs err %d\n", err);
-+		goto err_takedown;
-+	}
-+
-+	dev_info(dev, "probed evb device with %d ports\n",
-+		 priv->attr.num_ifs);
-+	return 0;
-+
-+err_takedown:
-+	evb_remove(evb_dev);
-+err_free_cmdport:
-+	fsl_mc_portal_free(priv->mc_io);
-+err_free_netdev:
-+	return err;
-+}
-+
-+static const struct fsl_mc_device_id evb_match_id_table[] = {
-+	{
-+		.vendor = FSL_MC_VENDOR_FREESCALE,
-+		.obj_type = "dpdmux",
-+	},
-+	{}
-+};
-+
-+static struct fsl_mc_driver evb_drv = {
-+	.driver = {
-+		.name		= KBUILD_MODNAME,
-+		.owner		= THIS_MODULE,
-+	},
-+	.probe		= evb_probe,
-+	.remove		= evb_remove,
-+	.match_id_table = evb_match_id_table,
-+};
-+
-+module_fsl_mc_driver(evb_drv);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Layerscape DPAA Edge Virtual Bridge driver (prototype)");
diff --git a/target/linux/layerscape/patches-5.4/701-net-0180-staging-dpaa2-evb-Fix-W-1-warnings.patch b/target/linux/layerscape/patches-5.4/701-net-0180-staging-dpaa2-evb-Fix-W-1-warnings.patch
deleted file mode 100644
index 7f1ffdb122..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0180-staging-dpaa2-evb-Fix-W-1-warnings.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 18d400e71c415adc8a5e5c91e461968907d26606 Mon Sep 17 00:00:00 2001
-From: Razvan Stefanescu <razvan.stefanescu@nxp.com>
-Date: Thu, 6 Apr 2017 11:02:57 +0300
-Subject: [PATCH] staging: dpaa2-evb: Fix W=1 warnings
-
-Fix warnings triggered by '-Wsign-compare' flag.
-
-Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/evb/evb.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/evb/evb.c
-+++ b/drivers/staging/fsl-dpaa2/evb/evb.c
-@@ -162,7 +162,7 @@ static irqreturn_t _evb_irq0_handler_thr
- 	/* Sanity check */
- 	if (WARN_ON(!evb_dev || !evb_dev->irqs || !evb_dev->irqs[irq_index]))
- 		goto out;
--	if (WARN_ON(evb_dev->irqs[irq_index]->msi_desc->irq != irq_num))
-+	if (WARN_ON(evb_dev->irqs[irq_index]->msi_desc->irq != (u32)irq_num))
- 		goto out;
- 
- 	err = dpdmux_get_irq_status(io, 0, token, irq_index, &status);
-@@ -890,7 +890,7 @@ static int evb_ethtool_get_sset_count(st
- static void evb_ethtool_get_strings(struct net_device *netdev,
- 				    u32 stringset, u8 *data)
- {
--	int i;
-+	u32 i;
- 
- 	switch (stringset) {
- 	case ETH_SS_STATS:
-@@ -906,7 +906,7 @@ static void evb_ethtool_get_stats(struct
- 				  u64 *data)
- {
- 	struct evb_port_priv	*port_priv = netdev_priv(netdev);
--	int			i;
-+	u32			i;
- 	int			err;
- 
- 	for (i = 0; i < ARRAY_SIZE(evb_ethtool_counters); i++) {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0181-staging-dpaa2-evb-Improve-ethtool-support.patch b/target/linux/layerscape/patches-5.4/701-net-0181-staging-dpaa2-evb-Improve-ethtool-support.patch
deleted file mode 100644
index 5a566ee8f7..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0181-staging-dpaa2-evb-Improve-ethtool-support.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-From b505f9a736c3850aa1dfefd7a803d797c2233aab Mon Sep 17 00:00:00 2001
-From: Razvan Stefanescu <razvan.stefanescu@nxp.com>
-Date: Thu, 13 Apr 2017 13:10:34 +0300
-Subject: [PATCH] staging: dpaa2-evb: Improve ethtool support
-
-Improve ethtool support by adding ops for:
-- driver info
-- link status
-- auto-negotiation setting and result
-- speed setting and result
-
-Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/evb/evb.c | 114 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 114 insertions(+)
-
---- a/drivers/staging/fsl-dpaa2/evb/evb.c
-+++ b/drivers/staging/fsl-dpaa2/evb/evb.c
-@@ -43,6 +43,8 @@
- #include "dpdmux.h"
- #include "dpdmux-cmd.h"
- 
-+static const char evb_drv_version[] = "0.1";
-+
- /* Minimal supported DPDMUX version */
- #define DPDMUX_MIN_VER_MAJOR			6
- #define DPDMUX_MIN_VER_MINOR			0
-@@ -860,6 +862,114 @@ static const struct net_device_ops evb_p
- 	.ndo_change_mtu		= &evb_change_mtu,
- };
- 
-+static void evb_get_drvinfo(struct net_device *netdev,
-+			    struct ethtool_drvinfo *drvinfo)
-+{
-+	struct evb_port_priv *port_priv = netdev_priv(netdev);
-+	u16 version_major, version_minor;
-+	int err;
-+
-+	strlcpy(drvinfo->driver, KBUILD_MODNAME, sizeof(drvinfo->driver));
-+	strlcpy(drvinfo->version, evb_drv_version, sizeof(drvinfo->version));
-+
-+	err = dpdmux_get_api_version(port_priv->evb_priv->mc_io, 0,
-+				     &version_major,
-+				     &version_minor);
-+	if (err)
-+		strlcpy(drvinfo->fw_version, "N/A",
-+			sizeof(drvinfo->fw_version));
-+	else
-+		snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
-+			 "%u.%u", version_major, version_minor);
-+
-+	strlcpy(drvinfo->bus_info, dev_name(netdev->dev.parent->parent),
-+		sizeof(drvinfo->bus_info));
-+}
-+
-+static int evb_get_link_ksettings(struct net_device *netdev,
-+				  struct ethtool_link_ksettings *link_settings)
-+{
-+	struct evb_port_priv *port_priv = netdev_priv(netdev);
-+	struct dpdmux_link_state state = {0};
-+	int err = 0;
-+
-+	err = dpdmux_if_get_link_state(port_priv->evb_priv->mc_io, 0,
-+				       port_priv->evb_priv->mux_handle,
-+				       port_priv->port_index,
-+				       &state);
-+	if (err) {
-+		netdev_err(netdev, "ERROR %d getting link state", err);
-+		goto out;
-+	}
-+
-+	/* At the moment, we have no way of interrogating the DPMAC
-+	 * from the DPDMUX side or there may not exist a DPMAC at all.
-+	 * Report only autoneg state, duplexity and speed.
-+	 */
-+	if (state.options & DPDMUX_LINK_OPT_AUTONEG)
-+		link_settings->base.autoneg = AUTONEG_ENABLE;
-+	if (!(state.options & DPDMUX_LINK_OPT_HALF_DUPLEX))
-+		link_settings->base.duplex = DUPLEX_FULL;
-+	link_settings->base.speed = state.rate;
-+
-+out:
-+	return err;
-+}
-+
-+static int evb_set_link_ksettings(struct net_device *netdev,
-+				  const struct ethtool_link_ksettings *link_settings)
-+{
-+	struct evb_port_priv *port_priv = netdev_priv(netdev);
-+	struct dpdmux_link_state state = {0};
-+	struct dpdmux_link_cfg cfg = {0};
-+	int err = 0;
-+
-+	netdev_dbg(netdev, "Setting link parameters...");
-+
-+	err = dpdmux_if_get_link_state(port_priv->evb_priv->mc_io, 0,
-+				       port_priv->evb_priv->mux_handle,
-+				       port_priv->port_index,
-+				       &state);
-+	if (err) {
-+		netdev_err(netdev, "ERROR %d getting link state", err);
-+		goto out;
-+	}
-+
-+	/* Due to a temporary MC limitation, the DPDMUX port must be down
-+	 * in order to be able to change link settings. Taking steps to let
-+	 * the user know that.
-+	 */
-+	if (netif_running(netdev)) {
-+		netdev_info(netdev,
-+			    "Sorry, interface must be brought down first.\n");
-+		return -EACCES;
-+	}
-+
-+	cfg.options = state.options;
-+	cfg.rate = link_settings->base.speed;
-+	if (link_settings->base.autoneg == AUTONEG_ENABLE)
-+		cfg.options |= DPDMUX_LINK_OPT_AUTONEG;
-+	else
-+		cfg.options &= ~DPDMUX_LINK_OPT_AUTONEG;
-+	if (link_settings->base.duplex == DUPLEX_HALF)
-+		cfg.options |= DPDMUX_LINK_OPT_HALF_DUPLEX;
-+	else
-+		cfg.options &= ~DPDMUX_LINK_OPT_HALF_DUPLEX;
-+
-+	err = dpdmux_if_set_link_cfg(port_priv->evb_priv->mc_io, 0,
-+				     port_priv->evb_priv->mux_handle,
-+				     port_priv->port_index,
-+				     &cfg);
-+	if (err)
-+		/* ethtool will be loud enough if we return an error; no point
-+		 * in putting our own error message on the console by default
-+		 */
-+		netdev_dbg(netdev, "ERROR %d setting link cfg", err);
-+
-+out:
-+	return err;
-+}
-+
- static struct {
- 	enum dpdmux_counter_type id;
- 	char name[ETH_GSTRING_LEN];
-@@ -923,6 +1033,10 @@ static void evb_ethtool_get_stats(struct
- }
- 
- static const struct ethtool_ops evb_port_ethtool_ops = {
-+	.get_drvinfo		= &evb_get_drvinfo,
-+	.get_link		= &ethtool_op_get_link,
-+	.get_link_ksettings	= &evb_get_link_ksettings,
-+	.set_link_ksettings	= &evb_set_link_ksettings,
- 	.get_strings		= &evb_ethtool_get_strings,
- 	.get_ethtool_stats	= &evb_ethtool_get_stats,
- 	.get_sset_count		= &evb_ethtool_get_sset_count,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0182-staging-dpaa2-evb-Update-MTU-update-procedure.patch b/target/linux/layerscape/patches-5.4/701-net-0182-staging-dpaa2-evb-Update-MTU-update-procedure.patch
deleted file mode 100644
index a3c87ead19..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0182-staging-dpaa2-evb-Update-MTU-update-procedure.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From e9c0434a55a0ddf28b1e7868890eb7557b2c28f9 Mon Sep 17 00:00:00 2001
-From: Razvan Stefanescu <razvan.stefanescu@nxp.com>
-Date: Thu, 17 Aug 2017 19:47:22 +0300
-Subject: [PATCH] staging: dpaa2-evb: Update MTU update procedure
-
-Set limits on the MTU to accommodate netdevice update. There is no need to
-check the limits before setting the new value.
-
-Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/evb/evb.c | 18 ++++++++----------
- 1 file changed, 8 insertions(+), 10 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/evb/evb.c
-+++ b/drivers/staging/fsl-dpaa2/evb/evb.c
-@@ -53,9 +53,9 @@ static const char evb_drv_version[] = "0
- #define DPDMUX_MAX_IRQ_NUM			2
- 
- /* MAX FRAME LENGTH (currently 10k) */
--#define EVB_MAX_FRAME_LENGTH			(10 * 1024)
--/* MIN FRAME LENGTH (64 bytes + 4 bytes CRC) */
--#define EVB_MIN_FRAME_LENGTH			68
-+#define EVB_MAX_FRAME_LENGTH		(10 * 1024)
-+#define EVB_MAX_MTU			(EVB_MAX_FRAME_LENGTH - VLAN_ETH_HLEN)
-+#define EVB_MIN_MTU			68
- 
- struct evb_port_priv {
- 	struct net_device	*netdev;
-@@ -457,16 +457,10 @@ static int evb_change_mtu(struct net_dev
- 	if (port_priv->port_index > 0)
- 		return -EPERM;
- 
--	if (mtu < EVB_MIN_FRAME_LENGTH || mtu > EVB_MAX_FRAME_LENGTH) {
--		netdev_err(netdev, "Invalid MTU %d. Valid range is: %d..%d\n",
--			   mtu, EVB_MIN_FRAME_LENGTH, EVB_MAX_FRAME_LENGTH);
--		return -EINVAL;
--	}
--
- 	err = dpdmux_set_max_frame_length(evb_priv->mc_io,
- 					  0,
- 					  evb_priv->mux_handle,
--					  (uint16_t)mtu);
-+					  (uint16_t)(mtu + VLAN_ETH_HLEN));
- 
- 	if (unlikely(err)) {
- 		netdev_err(netdev, "dpdmux_ul_set_max_frame_length err %d\n",
-@@ -1291,6 +1285,10 @@ static int evb_probe(struct fsl_mc_devic
- 
- 			list_add(&port_priv->list, &priv->port_list);
- 		} else {
-+			/* Set MTU limits only on uplink */
-+			port_netdev->min_mtu = EVB_MIN_MTU;
-+			port_netdev->max_mtu = EVB_MAX_MTU;
-+
- 			err = register_netdev(netdev);
- 
- 			if (err < 0) {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0183-staging-dpaa2-evb-Update-netlink-parsing-parameters.patch b/target/linux/layerscape/patches-5.4/701-net-0183-staging-dpaa2-evb-Update-netlink-parsing-parameters.patch
deleted file mode 100644
index fd647cd1c8..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0183-staging-dpaa2-evb-Update-netlink-parsing-parameters.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 49c58cd6735d5f8f6683543ea66bb348aaa91321 Mon Sep 17 00:00:00 2001
-From: Razvan Stefanescu <razvan.stefanescu@nxp.com>
-Date: Fri, 18 Aug 2017 12:34:24 +0300
-Subject: [PATCH] staging: dpaa2-evb: Update netlink parsing parameters
-
-Accommodate extended ACL reporting addded to netlink parsing functions.
-
-Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/evb/evb.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/evb/evb.c
-+++ b/drivers/staging/fsl-dpaa2/evb/evb.c
-@@ -533,7 +533,7 @@ static int evb_setlink(struct net_device
- 	attr = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
- 	if (attr) {
- 		err = nla_parse_nested(tb, IFLA_BRIDGE_MAX, attr,
--				       ifla_br_policy);
-+				       ifla_br_policy, NULL);
- 		if (unlikely(err)) {
- 			netdev_err(netdev,
- 				   "nla_parse_nested for br_policy err %d\n",
-@@ -739,7 +739,7 @@ static int evb_dellink(struct net_device
- 	if (!spec)
- 		return 0;
- 
--	err = nla_parse_nested(tb, IFLA_BRIDGE_MAX, spec, ifla_br_policy);
-+	err = nla_parse_nested(tb, IFLA_BRIDGE_MAX, spec, ifla_br_policy, NULL);
- 	if (unlikely(err))
- 		return err;
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0184-staging-dpaa2-evb-Update-netdev_master_upper_dev_lin.patch b/target/linux/layerscape/patches-5.4/701-net-0184-staging-dpaa2-evb-Update-netdev_master_upper_dev_lin.patch
deleted file mode 100644
index bfc6759802..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0184-staging-dpaa2-evb-Update-netdev_master_upper_dev_lin.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From e8fcf855b73cd52ff51d3b99d0bf8afdf6267c2f Mon Sep 17 00:00:00 2001
-From: Razvan Stefanescu <razvan.stefanescu@nxp.com>
-Date: Fri, 20 Oct 2017 16:14:38 +0300
-Subject: [PATCH] staging: dpaa2-evb: Update netdev_master_upper_dev_link
- parameters
-
-Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/evb/evb.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/staging/fsl-dpaa2/evb/evb.c
-+++ b/drivers/staging/fsl-dpaa2/evb/evb.c
-@@ -1270,7 +1270,7 @@ static int evb_probe(struct fsl_mc_devic
- 
- 			rtnl_lock();
- 			err = netdev_master_upper_dev_link(port_netdev, netdev,
--							   NULL, NULL);
-+							   NULL, NULL, NULL);
- 			if (unlikely(err)) {
- 				dev_err(dev, "netdev_master_upper_dev_link err %d\n",
- 					err);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0185-staging-dpaa2-evb-Use-MC-portal-in-atomic-context.patch b/target/linux/layerscape/patches-5.4/701-net-0185-staging-dpaa2-evb-Use-MC-portal-in-atomic-context.patch
deleted file mode 100644
index dae6a0bf84..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0185-staging-dpaa2-evb-Use-MC-portal-in-atomic-context.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 918a96ed5ff4cbb499242279e3c76ab7bee43c88 Mon Sep 17 00:00:00 2001
-From: Razvan Stefanescu <razvan.stefanescu@nxp.com>
-Date: Tue, 3 Apr 2018 13:53:00 +0300
-Subject: [PATCH] staging: dpaa2-evb: Use MC portal in atomic context
-
-Avoid triggering stack trace when retrieving interface counters via
-ifconfig by allocating MC portal with atomic I/O enabled.
-
-Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/evb/evb.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/staging/fsl-dpaa2/evb/evb.c
-+++ b/drivers/staging/fsl-dpaa2/evb/evb.c
-@@ -1204,7 +1204,8 @@ static int evb_probe(struct fsl_mc_devic
- 
- 	priv = netdev_priv(netdev);
- 
--	err = fsl_mc_portal_allocate(evb_dev, 0, &priv->mc_io);
-+	err = fsl_mc_portal_allocate(evb_dev, FSL_MC_IO_ATOMIC_CONTEXT_PORTAL,
-+				     &priv->mc_io);
- 	if (unlikely(err)) {
- 		dev_err(dev, "fsl_mc_portal_allocate err %d\n", err);
- 		goto err_free_netdev;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0186-staging-dpaa2-evb-change-mc_command-in-fsl_mc_comman.patch b/target/linux/layerscape/patches-5.4/701-net-0186-staging-dpaa2-evb-change-mc_command-in-fsl_mc_comman.patch
deleted file mode 100644
index a6e080d5c2..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0186-staging-dpaa2-evb-change-mc_command-in-fsl_mc_comman.patch
+++ /dev/null
@@ -1,284 +0,0 @@
-From 92ee95e52191107f8c8adea810232920358ae0e0 Mon Sep 17 00:00:00 2001
-From: Razvan Stefanescu <razvan.stefanescu@nxp.com>
-Date: Thu, 12 Apr 2018 15:19:10 +0300
-Subject: [PATCH] staging: dpaa2-evb: change mc_command in fsl_mc_command
-
-Adapt to the upstream changes.
-
-Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/evb/dpdmux.c | 60 +++++++++++++++++-----------------
- 1 file changed, 30 insertions(+), 30 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/evb/dpdmux.c
-+++ b/drivers/staging/fsl-dpaa2/evb/dpdmux.c
-@@ -55,7 +55,7 @@ int dpdmux_open(struct fsl_mc_io *mc_io,
- 		int dpdmux_id,
- 		u16 *token)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_open *cmd_params;
- 	int err;
- 
-@@ -92,7 +92,7 @@ int dpdmux_close(struct fsl_mc_io *mc_io
- 		 u32 cmd_flags,
- 		 u16 token)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_CLOSE,
-@@ -131,7 +131,7 @@ int dpdmux_create(struct fsl_mc_io *mc_i
- 		  const struct dpdmux_cfg *cfg,
- 		  u32 *obj_id)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_create *cmd_params;
- 	int err;
- 
-@@ -180,7 +180,7 @@ int dpdmux_destroy(struct fsl_mc_io *mc_
- 		   u32 cmd_flags,
- 		   u32 object_id)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_destroy *cmd_params;
- 
- 	/* prepare command */
-@@ -206,7 +206,7 @@ int dpdmux_enable(struct fsl_mc_io *mc_i
- 		  u32 cmd_flags,
- 		  u16 token)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_ENABLE,
-@@ -229,7 +229,7 @@ int dpdmux_disable(struct fsl_mc_io *mc_
- 		   u32 cmd_flags,
- 		   u16 token)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_DISABLE,
-@@ -254,7 +254,7 @@ int dpdmux_is_enabled(struct fsl_mc_io *
- 		      u16 token,
- 		      int *en)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_rsp_is_enabled *rsp_params;
- 	int err;
- 
-@@ -287,7 +287,7 @@ int dpdmux_reset(struct fsl_mc_io *mc_io
- 		 u32 cmd_flags,
- 		 u16 token)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_RESET,
-@@ -319,7 +319,7 @@ int dpdmux_set_irq_enable(struct fsl_mc_
- 			  u8 irq_index,
- 			  u8 en)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_set_irq_enable *cmd_params;
- 
- 	/* prepare command */
-@@ -350,7 +350,7 @@ int dpdmux_get_irq_enable(struct fsl_mc_
- 			  u8 irq_index,
- 			  u8 *en)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_get_irq_enable *cmd_params;
- 	struct dpdmux_rsp_get_irq_enable *rsp_params;
- 	int err;
-@@ -396,7 +396,7 @@ int dpdmux_set_irq_mask(struct fsl_mc_io
- 			u8 irq_index,
- 			u32 mask)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_set_irq_mask *cmd_params;
- 
- 	/* prepare command */
-@@ -430,7 +430,7 @@ int dpdmux_get_irq_mask(struct fsl_mc_io
- 			u8 irq_index,
- 			u32 *mask)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_get_irq_mask *cmd_params;
- 	struct dpdmux_rsp_get_irq_mask *rsp_params;
- 	int err;
-@@ -472,7 +472,7 @@ int dpdmux_get_irq_status(struct fsl_mc_
- 			  u8 irq_index,
- 			  u32 *status)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_get_irq_status *cmd_params;
- 	struct dpdmux_rsp_get_irq_status *rsp_params;
- 	int err;
-@@ -515,7 +515,7 @@ int dpdmux_clear_irq_status(struct fsl_m
- 			    u8 irq_index,
- 			    u32 status)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_clear_irq_status *cmd_params;
- 
- 	/* prepare command */
-@@ -544,7 +544,7 @@ int dpdmux_get_attributes(struct fsl_mc_
- 			  u16 token,
- 			  struct dpdmux_attr *attr)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_rsp_get_attr *rsp_params;
- 	int err;
- 
-@@ -585,7 +585,7 @@ int dpdmux_if_enable(struct fsl_mc_io *m
- 		     u16 if_id)
- {
- 	struct dpdmux_cmd_if *cmd_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_ENABLE,
-@@ -613,7 +613,7 @@ int dpdmux_if_disable(struct fsl_mc_io *
- 		      u16 if_id)
- {
- 	struct dpdmux_cmd_if *cmd_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_DISABLE,
-@@ -645,7 +645,7 @@ int dpdmux_set_max_frame_length(struct f
- 				u16 token,
- 				u16 max_frame_length)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_set_max_frame_length *cmd_params;
- 
- 	/* prepare command */
-@@ -671,7 +671,7 @@ int dpdmux_ul_reset_counters(struct fsl_
- 			     u32 cmd_flags,
- 			     u16 token)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_UL_RESET_COUNTERS,
-@@ -705,7 +705,7 @@ int dpdmux_if_set_accepted_frames(struct
- 				  u16 if_id,
- 				  const struct dpdmux_accepted_frames *cfg)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_if_set_accepted_frames *cmd_params;
- 
- 	/* prepare command */
-@@ -739,7 +739,7 @@ int dpdmux_if_get_attributes(struct fsl_
- 			     u16 if_id,
- 			     struct dpdmux_if_attr *attr)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_if *cmd_params;
- 	struct dpdmux_rsp_if_get_attr *rsp_params;
- 	int err;
-@@ -786,7 +786,7 @@ int dpdmux_if_remove_l2_rule(struct fsl_
- 			     u16 if_id,
- 			     const struct dpdmux_l2_rule *rule)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_if_l2_rule *cmd_params;
- 
- 	/* prepare command */
-@@ -826,7 +826,7 @@ int dpdmux_if_add_l2_rule(struct fsl_mc_
- 			  u16 if_id,
- 			  const struct dpdmux_l2_rule *rule)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_if_l2_rule *cmd_params;
- 
- 	/* prepare command */
-@@ -865,7 +865,7 @@ int dpdmux_if_get_counter(struct fsl_mc_
- 			  enum dpdmux_counter_type counter_type,
- 			  u64 *counter)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_if_get_counter *cmd_params;
- 	struct dpdmux_rsp_if_get_counter *rsp_params;
- 	int err;
-@@ -906,7 +906,7 @@ int dpdmux_if_set_link_cfg(struct fsl_mc
- 			   u16 if_id,
- 			   struct dpdmux_link_cfg *cfg)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_if_set_link_cfg *cmd_params;
- 
- 	/* prepare command */
-@@ -938,7 +938,7 @@ int dpdmux_if_get_link_state(struct fsl_
- 			     u16 if_id,
- 			     struct dpdmux_link_state *state)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_cmd_if_get_link_state *cmd_params;
- 	struct dpdmux_rsp_if_get_link_state *rsp_params;
- 	int err;
-@@ -989,7 +989,7 @@ int dpdmux_set_custom_key(struct fsl_mc_
- 			  u64 key_cfg_iova)
- {
- 	struct dpdmux_set_custom_key *cmd_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_SET_CUSTOM_KEY,
-@@ -1025,7 +1025,7 @@ int dpdmux_add_custom_cls_entry(struct f
- 				struct dpdmux_cls_action *action)
- {
- 	struct dpdmux_cmd_add_custom_cls_entry *cmd_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_ADD_CUSTOM_CLS_ENTRY,
-@@ -1062,7 +1062,7 @@ int dpdmux_remove_custom_cls_entry(struc
- 				   struct dpdmux_rule_cfg *rule)
- {
- 	struct dpdmux_cmd_remove_custom_cls_entry *cmd_params;
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 
- 	/* prepare command */
- 	cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_REMOVE_CUSTOM_CLS_ENTRY,
-@@ -1091,7 +1091,7 @@ int dpdmux_get_api_version(struct fsl_mc
- 			   u16 *major_ver,
- 			   u16 *minor_ver)
- {
--	struct mc_command cmd = { 0 };
-+	struct fsl_mc_command cmd = { 0 };
- 	struct dpdmux_rsp_get_api_version *rsp_params;
- 	int err;
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0187-staging-dpaa2-evb-Fix-MC-bus-include.patch b/target/linux/layerscape/patches-5.4/701-net-0187-staging-dpaa2-evb-Fix-MC-bus-include.patch
deleted file mode 100644
index f5cb38e14b..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0187-staging-dpaa2-evb-Fix-MC-bus-include.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 64be51568219eb436b46d7f6d0c85fd81bce4fde Mon Sep 17 00:00:00 2001
-From: Razvan Stefanescu <razvan.stefanescu@nxp.com>
-Date: Thu, 12 Apr 2018 15:55:30 +0300
-Subject: [PATCH] staging: dpaa2-evb: Fix MC bus include
-
-Adapt to upstream changes.
-
-Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/evb/dpdmux.c | 2 +-
- drivers/staging/fsl-dpaa2/evb/evb.c    | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/evb/dpdmux.c
-+++ b/drivers/staging/fsl-dpaa2/evb/dpdmux.c
-@@ -29,7 +29,7 @@
-  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-  * POSSIBILITY OF SUCH DAMAGE.
-  */
--#include "../../fsl-mc/include/mc.h"
-+#include <linux/fsl/mc.h>
- #include "dpdmux.h"
- #include "dpdmux-cmd.h"
- 
---- a/drivers/staging/fsl-dpaa2/evb/evb.c
-+++ b/drivers/staging/fsl-dpaa2/evb/evb.c
-@@ -38,7 +38,7 @@
- #include <uapi/linux/if_bridge.h>
- #include <net/netlink.h>
- 
--#include "../../fsl-mc/include/mc.h"
-+#include <linux/fsl/mc.h>
- 
- #include "dpdmux.h"
- #include "dpdmux-cmd.h"
diff --git a/target/linux/layerscape/patches-5.4/701-net-0188-staging-dpaa2-evb-Defer-probe-if-no-mc-portal-is-fou.patch b/target/linux/layerscape/patches-5.4/701-net-0188-staging-dpaa2-evb-Defer-probe-if-no-mc-portal-is-fou.patch
deleted file mode 100644
index d95ecf8a90..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0188-staging-dpaa2-evb-Defer-probe-if-no-mc-portal-is-fou.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From ac03137b2283c45ad0538188728d9691fa7a4883 Mon Sep 17 00:00:00 2001
-From: Razvan Stefanescu <razvan.stefanescu@nxp.com>
-Date: Mon, 30 Apr 2018 11:27:27 +0300
-Subject: [PATCH] staging: dpaa2-evb: Defer probe if no mc portal is found
-
-Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/evb/evb.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/evb/evb.c
-+++ b/drivers/staging/fsl-dpaa2/evb/evb.c
-@@ -1206,10 +1206,14 @@ static int evb_probe(struct fsl_mc_devic
- 
- 	err = fsl_mc_portal_allocate(evb_dev, FSL_MC_IO_ATOMIC_CONTEXT_PORTAL,
- 				     &priv->mc_io);
--	if (unlikely(err)) {
--		dev_err(dev, "fsl_mc_portal_allocate err %d\n", err);
-+	if (err) {
-+		if (err == -ENXIO)
-+			err = -EPROBE_DEFER;
-+		else
-+			dev_err(dev, "fsl_mc_portal_allocate err %d\n", err);
- 		goto err_free_netdev;
- 	}
-+
- 	if (!priv->mc_io) {
- 		dev_err(dev, "fsl_mc_portal_allocate returned null handle but no error\n");
- 		err = -EFAULT;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0189-staging-dpaa2-evb-Update-netlink-attributes-API.patch b/target/linux/layerscape/patches-5.4/701-net-0189-staging-dpaa2-evb-Update-netlink-attributes-API.patch
deleted file mode 100644
index 5db172e4ae..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0189-staging-dpaa2-evb-Update-netlink-attributes-API.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 50a9c893a750c4eef7fbf60f5b6eb4833e35a943 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Wed, 24 Jul 2019 21:43:49 +0300
-Subject: [PATCH] staging: dpaa2-evb: Update netlink attributes API
-
-Account for upstream changes in some nla functions.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/staging/fsl-dpaa2/evb/evb.c | 11 ++++++-----
- 1 file changed, 6 insertions(+), 5 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/evb/evb.c
-+++ b/drivers/staging/fsl-dpaa2/evb/evb.c
-@@ -532,8 +532,8 @@ static int evb_setlink(struct net_device
- 
- 	attr = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
- 	if (attr) {
--		err = nla_parse_nested(tb, IFLA_BRIDGE_MAX, attr,
--				       ifla_br_policy, NULL);
-+		err = nla_parse_nested_deprecated(tb, IFLA_BRIDGE_MAX, attr,
-+						  ifla_br_policy, NULL);
- 		if (unlikely(err)) {
- 			netdev_err(netdev,
- 				   "nla_parse_nested for br_policy err %d\n",
-@@ -596,7 +596,7 @@ static int __nla_put_port(struct sk_buff
- 	struct nlattr	*nest;
- 	int		err;
- 
--	nest = nla_nest_start(skb, IFLA_PROTINFO | NLA_F_NESTED);
-+	nest = nla_nest_start_noflag(skb, IFLA_PROTINFO | NLA_F_NESTED);
- 	if (!nest) {
- 		netdev_err(netdev, "nla_nest_start failed\n");
- 		return -ENOMEM;
-@@ -648,7 +648,7 @@ static int __nla_put_vlan(struct sk_buff
- 	u16			i;
- 	int			err;
- 
--	nest = nla_nest_start(skb, IFLA_AF_SPEC);
-+	nest = nla_nest_start_noflag(skb, IFLA_AF_SPEC);
- 	if (!nest) {
- 		netdev_err(netdev, "nla_nest_start failed");
- 		return -ENOMEM;
-@@ -739,7 +739,8 @@ static int evb_dellink(struct net_device
- 	if (!spec)
- 		return 0;
- 
--	err = nla_parse_nested(tb, IFLA_BRIDGE_MAX, spec, ifla_br_policy, NULL);
-+	err = nla_parse_nested_deprecated(tb, IFLA_BRIDGE_MAX, spec,
-+					  ifla_br_policy, NULL);
- 	if (unlikely(err))
- 		return err;
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0190-dpaa2-eth-Cleanup-dead-code.patch b/target/linux/layerscape/patches-5.4/701-net-0190-dpaa2-eth-Cleanup-dead-code.patch
deleted file mode 100644
index 18dc4e1353..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0190-dpaa2-eth-Cleanup-dead-code.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From f56f2b85c6a670c74f28daad249920d4ee4161a9 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Tue, 3 Sep 2019 21:20:07 +0300
-Subject: [PATCH] dpaa2-eth: Cleanup dead code
-
-Remove one function call whose result was not used anywhere.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -2046,7 +2046,6 @@ static struct fsl_mc_device *setup_dpcon
- {
- 	struct fsl_mc_device *dpcon;
- 	struct device *dev = priv->net_dev->dev.parent;
--	struct dpcon_attr attrs;
- 	int err;
- 
- 	err = fsl_mc_object_allocate(to_fsl_mc_device(dev),
-@@ -2071,12 +2070,6 @@ static struct fsl_mc_device *setup_dpcon
- 		goto close;
- 	}
- 
--	err = dpcon_get_attributes(priv->mc_io, 0, dpcon->mc_handle, &attrs);
--	if (err) {
--		dev_err(dev, "dpcon_get_attributes() failed\n");
--		goto close;
--	}
--
- 	err = dpcon_enable(priv->mc_io, 0, dpcon->mc_handle);
- 	if (err) {
- 		dev_err(dev, "dpcon_enable() failed\n");
diff --git a/target/linux/layerscape/patches-5.4/701-net-0191-dpaa2-eth-Avoid-unbounded-while-loops.patch b/target/linux/layerscape/patches-5.4/701-net-0191-dpaa2-eth-Avoid-unbounded-while-loops.patch
deleted file mode 100644
index 72b41a45bb..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0191-dpaa2-eth-Avoid-unbounded-while-loops.patch
+++ /dev/null
@@ -1,160 +0,0 @@
-From 3420c5bf9d08df074b67c7feda8a37d951d0b232 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Wed, 18 Sep 2019 13:31:07 +0300
-Subject: [PATCH] dpaa2-eth: Avoid unbounded while loops
-
-Throughout the driver there are several places where we wait
-indefinitely for DPIO portal commands to be executed, while
-the portal returns a busy response code.
-
-Even though in theory we are guaranteed the portals become
-available eventually, in practice the QBMan hardware module
-may become unresponsive in various corner cases.
-
-Make sure we can never get stuck in an infinite while loop
-by adding a retry counter for all portal commands.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 30 ++++++++++++++++++++----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h |  8 +++++++
- 2 files changed, 33 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -221,6 +221,7 @@ static void xdp_release_buf(struct dpaa2
- 			    struct dpaa2_eth_channel *ch,
- 			    dma_addr_t addr)
- {
-+	int retries = 0;
- 	int err;
- 
- 	ch->xdp.drop_bufs[ch->xdp.drop_cnt++] = addr;
-@@ -229,8 +230,11 @@ static void xdp_release_buf(struct dpaa2
- 
- 	while ((err = dpaa2_io_service_release(ch->dpio, priv->bpid,
- 					       ch->xdp.drop_bufs,
--					       ch->xdp.drop_cnt)) == -EBUSY)
-+					       ch->xdp.drop_cnt)) == -EBUSY) {
-+		if (retries++ >= DPAA2_ETH_SWP_BUSY_RETRIES)
-+			break;
- 		cpu_relax();
-+	}
- 
- 	if (err) {
- 		free_bufs(priv, ch->xdp.drop_bufs, ch->xdp.drop_cnt);
-@@ -458,7 +462,7 @@ static int consume_frames(struct dpaa2_e
- 	struct dpaa2_eth_fq *fq = NULL;
- 	struct dpaa2_dq *dq;
- 	const struct dpaa2_fd *fd;
--	int cleaned = 0;
-+	int cleaned = 0, retries = 0;
- 	int is_last;
- 
- 	do {
-@@ -469,6 +473,11 @@ static int consume_frames(struct dpaa2_e
- 			 * the store until we get some sort of valid response
- 			 * token (either a valid frame or an "empty dequeue")
- 			 */
-+			if (retries++ >= DPAA2_ETH_SWP_BUSY_RETRIES) {
-+				netdev_err_once(priv->net_dev,
-+						"Unable to read a valid dequeue response\n");
-+				return 0;
-+			}
- 			continue;
- 		}
- 
-@@ -477,6 +486,7 @@ static int consume_frames(struct dpaa2_e
- 
- 		fq->consume(priv, ch, fd, fq);
- 		cleaned++;
-+		retries = 0;
- 	} while (!is_last);
- 
- 	if (!cleaned)
-@@ -949,6 +959,7 @@ static int add_bufs(struct dpaa2_eth_pri
- 	u64 buf_array[DPAA2_ETH_BUFS_PER_CMD];
- 	struct page *page;
- 	dma_addr_t addr;
-+	int retries = 0;
- 	int i, err;
- 
- 	for (i = 0; i < DPAA2_ETH_BUFS_PER_CMD; i++) {
-@@ -980,8 +991,11 @@ static int add_bufs(struct dpaa2_eth_pri
- release_bufs:
- 	/* In case the portal is busy, retry until successful */
- 	while ((err = dpaa2_io_service_release(ch->dpio, bpid,
--					       buf_array, i)) == -EBUSY)
-+					       buf_array, i)) == -EBUSY) {
-+		if (retries++ >= DPAA2_ETH_SWP_BUSY_RETRIES)
-+			break;
- 		cpu_relax();
-+	}
- 
- 	/* If release command failed, clean up and bail out;
- 	 * not much else we can do about it
-@@ -1032,16 +1046,21 @@ static int seed_pool(struct dpaa2_eth_pr
- static void drain_bufs(struct dpaa2_eth_priv *priv, int count)
- {
- 	u64 buf_array[DPAA2_ETH_BUFS_PER_CMD];
-+	int retries = 0;
- 	int ret;
- 
- 	do {
- 		ret = dpaa2_io_service_acquire(NULL, priv->bpid,
- 					       buf_array, count);
- 		if (ret < 0) {
-+			if (ret == -EBUSY &&
-+			    retries++ >= DPAA2_ETH_SWP_BUSY_RETRIES)
-+				continue;
- 			netdev_err(priv->net_dev, "dpaa2_io_service_acquire() failed\n");
- 			return;
- 		}
- 		free_bufs(priv, buf_array, ret);
-+		retries = 0;
- 	} while (ret);
- }
- 
-@@ -1094,7 +1113,7 @@ static int pull_channel(struct dpaa2_eth
- 						    ch->store);
- 		dequeues++;
- 		cpu_relax();
--	} while (err == -EBUSY);
-+	} while (err == -EBUSY && dequeues < DPAA2_ETH_SWP_BUSY_RETRIES);
- 
- 	ch->stats.dequeue_portal_busy += dequeues;
- 	if (unlikely(err))
-@@ -1118,6 +1137,7 @@ static int dpaa2_eth_poll(struct napi_st
- 	struct netdev_queue *nq;
- 	int store_cleaned, work_done;
- 	struct list_head rx_list;
-+	int retries = 0;
- 	int err;
- 
- 	ch = container_of(napi, struct dpaa2_eth_channel, napi);
-@@ -1163,7 +1183,7 @@ static int dpaa2_eth_poll(struct napi_st
- 	do {
- 		err = dpaa2_io_service_rearm(ch->dpio, &ch->nctx);
- 		cpu_relax();
--	} while (err == -EBUSY);
-+	} while (err == -EBUSY && retries++ < DPAA2_ETH_SWP_BUSY_RETRIES);
- 	WARN_ONCE(err, "CDAN notifications rearm failed on core %d",
- 		  ch->nctx.desired_cpu);
- 
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -245,6 +245,14 @@ static inline struct dpaa2_faead *dpaa2_
-  */
- #define DPAA2_ETH_ENQUEUE_RETRIES	10
- 
-+/* Number of times to retry DPIO portal operations while waiting
-+ * for portal to finish executing current command and become
-+ * available. We want to avoid being stuck in a while loop in case
-+ * hardware becomes unresponsive, but not give up too easily if
-+ * the portal really is busy for valid reasons
-+ */
-+#define DPAA2_ETH_SWP_BUSY_RETRIES	1000
-+
- /* Driver statistics, other than those in struct rtnl_link_stats64.
-  * These are usually collected per-CPU and aggregated by ethtool.
-  */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0192-dpaa2-eth-Add-support-for-Rx-traffic-classes.patch b/target/linux/layerscape/patches-5.4/701-net-0192-dpaa2-eth-Add-support-for-Rx-traffic-classes.patch
deleted file mode 100644
index 0ec6133fca..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0192-dpaa2-eth-Add-support-for-Rx-traffic-classes.patch
+++ /dev/null
@@ -1,263 +0,0 @@
-From 936ce2452068cb0f6d48ca7d77d6b975802c19ae Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Tue, 3 Sep 2019 14:13:32 +0300
-Subject: [PATCH] dpaa2-eth: Add support for Rx traffic classes
-
-The firmware reserves for each DPNI a number of RX frame queues
-equal to the number of configured flows x number of configured
-traffic classes.
-
-Current driver configuration directs all incoming traffic to
-FQs corresponding to TC0, leaving all other priority levels unused.
-
-Start adding support for multiple ingress traffic classes, by
-configuring the FQs associated with all priority levels, not just
-TC0. All settings that are per-TC, such as those related to
-hashing and flow steering, are also updated.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- .../ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c   |  7 ++-
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c   | 70 +++++++++++++++-------
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h   |  4 +-
- .../net/ethernet/freescale/dpaa2/dpaa2-ethtool.c   | 19 ++++--
- 4 files changed, 68 insertions(+), 32 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c
-@@ -81,8 +81,8 @@ static int dpaa2_dbg_fqs_show(struct seq
- 	int i, err;
- 
- 	seq_printf(file, "FQ stats for %s:\n", priv->net_dev->name);
--	seq_printf(file, "%s%16s%16s%16s%16s\n",
--		   "VFQID", "CPU", "Type", "Frames", "Pending frames");
-+	seq_printf(file, "%s%16s%16s%16s%16s%16s\n",
-+		   "VFQID", "CPU", "TC", "Type", "Frames", "Pending frames");
- 
- 	for (i = 0; i <  priv->num_fqs; i++) {
- 		fq = &priv->fq[i];
-@@ -90,9 +90,10 @@ static int dpaa2_dbg_fqs_show(struct seq
- 		if (err)
- 			fcnt = 0;
- 
--		seq_printf(file, "%5d%16d%16s%16llu%16u\n",
-+		seq_printf(file, "%5d%16d%16d%16s%16llu%16u\n",
- 			   fq->fqid,
- 			   fq->target_cpu,
-+			   fq->tc,
- 			   fq_type_to_str(fq),
- 			   fq->stats.frames,
- 			   fcnt);
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -1231,6 +1231,7 @@ static void disable_ch_napi(struct dpaa2
- static void dpaa2_eth_set_rx_taildrop(struct dpaa2_eth_priv *priv, bool enable)
- {
- 	struct dpni_taildrop td = {0};
-+	struct dpaa2_eth_fq *fq;
- 	int i, err;
- 
- 	if (priv->rx_td_enabled == enable)
-@@ -1240,11 +1241,12 @@ static void dpaa2_eth_set_rx_taildrop(st
- 	td.threshold = DPAA2_ETH_TAILDROP_THRESH;
- 
- 	for (i = 0; i < priv->num_fqs; i++) {
--		if (priv->fq[i].type != DPAA2_RX_FQ)
-+		fq = &priv->fq[i];
-+		if (fq->type != DPAA2_RX_FQ)
- 			continue;
- 		err = dpni_set_taildrop(priv->mc_io, 0, priv->mc_token,
--					DPNI_CP_QUEUE, DPNI_QUEUE_RX, 0,
--					priv->fq[i].flowid, &td);
-+					DPNI_CP_QUEUE, DPNI_QUEUE_RX,
-+					fq->tc, fq->flowid, &td);
- 		if (err) {
- 			netdev_err(priv->net_dev,
- 				   "dpni_set_taildrop() failed\n");
-@@ -2338,7 +2340,7 @@ static void set_fq_affinity(struct dpaa2
- 
- static void setup_fqs(struct dpaa2_eth_priv *priv)
- {
--	int i;
-+	int i, j;
- 
- 	/* We have one TxConf FQ per Tx flow.
- 	 * The number of Tx and Rx queues is the same.
-@@ -2350,10 +2352,13 @@ static void setup_fqs(struct dpaa2_eth_p
- 		priv->fq[priv->num_fqs++].flowid = (u16)i;
- 	}
- 
--	for (i = 0; i < dpaa2_eth_queue_count(priv); i++) {
--		priv->fq[priv->num_fqs].type = DPAA2_RX_FQ;
--		priv->fq[priv->num_fqs].consume = dpaa2_eth_rx;
--		priv->fq[priv->num_fqs++].flowid = (u16)i;
-+	for (j = 0; j < dpaa2_eth_tc_count(priv); j++) {
-+		for (i = 0; i < dpaa2_eth_queue_count(priv); i++) {
-+			priv->fq[priv->num_fqs].type = DPAA2_RX_FQ;
-+			priv->fq[priv->num_fqs].consume = dpaa2_eth_rx;
-+			priv->fq[priv->num_fqs].tc = (u8)j;
-+			priv->fq[priv->num_fqs++].flowid = (u16)i;
-+		}
- 	}
- 
- 	/* For each FQ, decide on which core to process incoming frames */
-@@ -2701,7 +2706,7 @@ static int setup_rx_flow(struct dpaa2_et
- 	int err;
- 
- 	err = dpni_get_queue(priv->mc_io, 0, priv->mc_token,
--			     DPNI_QUEUE_RX, 0, fq->flowid, &queue, &qid);
-+			     DPNI_QUEUE_RX, fq->tc, fq->flowid, &queue, &qid);
- 	if (err) {
- 		dev_err(dev, "dpni_get_queue(RX) failed\n");
- 		return err;
-@@ -2714,7 +2719,7 @@ static int setup_rx_flow(struct dpaa2_et
- 	queue.destination.priority = 1;
- 	queue.user_context = (u64)(uintptr_t)fq;
- 	err = dpni_set_queue(priv->mc_io, 0, priv->mc_token,
--			     DPNI_QUEUE_RX, 0, fq->flowid,
-+			     DPNI_QUEUE_RX, fq->tc, fq->flowid,
- 			     DPNI_QUEUE_OPT_USER_CTX | DPNI_QUEUE_OPT_DEST,
- 			     &queue);
- 	if (err) {
-@@ -2723,6 +2728,10 @@ static int setup_rx_flow(struct dpaa2_et
- 	}
- 
- 	/* xdp_rxq setup */
-+	/* only once for each channel */
-+	if (fq->tc > 0)
-+		return 0;
-+
- 	err = xdp_rxq_info_reg(&fq->channel->xdp_rxq, priv->net_dev,
- 			       fq->flowid);
- 	if (err) {
-@@ -2860,7 +2869,7 @@ static int config_legacy_hash_key(struct
- {
- 	struct device *dev = priv->net_dev->dev.parent;
- 	struct dpni_rx_tc_dist_cfg dist_cfg;
--	int err;
-+	int i, err = 0;
- 
- 	memset(&dist_cfg, 0, sizeof(dist_cfg));
- 
-@@ -2868,9 +2877,14 @@ static int config_legacy_hash_key(struct
- 	dist_cfg.dist_size = dpaa2_eth_queue_count(priv);
- 	dist_cfg.dist_mode = DPNI_DIST_MODE_HASH;
- 
--	err = dpni_set_rx_tc_dist(priv->mc_io, 0, priv->mc_token, 0, &dist_cfg);
--	if (err)
--		dev_err(dev, "dpni_set_rx_tc_dist failed\n");
-+	for (i = 0; i < dpaa2_eth_tc_count(priv); i++) {
-+		err = dpni_set_rx_tc_dist(priv->mc_io, 0, priv->mc_token,
-+					  i, &dist_cfg);
-+		if (err) {
-+			dev_err(dev, "dpni_set_rx_tc_dist failed\n");
-+			break;
-+		}
-+	}
- 
- 	return err;
- }
-@@ -2880,7 +2894,7 @@ static int config_hash_key(struct dpaa2_
- {
- 	struct device *dev = priv->net_dev->dev.parent;
- 	struct dpni_rx_dist_cfg dist_cfg;
--	int err;
-+	int i, err = 0;
- 
- 	memset(&dist_cfg, 0, sizeof(dist_cfg));
- 
-@@ -2888,9 +2902,15 @@ static int config_hash_key(struct dpaa2_
- 	dist_cfg.dist_size = dpaa2_eth_queue_count(priv);
- 	dist_cfg.enable = 1;
- 
--	err = dpni_set_rx_hash_dist(priv->mc_io, 0, priv->mc_token, &dist_cfg);
--	if (err)
--		dev_err(dev, "dpni_set_rx_hash_dist failed\n");
-+	for (i = 0; i < dpaa2_eth_tc_count(priv); i++) {
-+		dist_cfg.tc = i;
-+		err = dpni_set_rx_hash_dist(priv->mc_io, 0, priv->mc_token,
-+					    &dist_cfg);
-+		if (err) {
-+			dev_err(dev, "dpni_set_rx_hash_dist failed\n");
-+			break;
-+		}
-+	}
- 
- 	return err;
- }
-@@ -2900,7 +2920,7 @@ static int config_cls_key(struct dpaa2_e
- {
- 	struct device *dev = priv->net_dev->dev.parent;
- 	struct dpni_rx_dist_cfg dist_cfg;
--	int err;
-+	int i, err = 0;
- 
- 	memset(&dist_cfg, 0, sizeof(dist_cfg));
- 
-@@ -2908,9 +2928,15 @@ static int config_cls_key(struct dpaa2_e
- 	dist_cfg.dist_size = dpaa2_eth_queue_count(priv);
- 	dist_cfg.enable = 1;
- 
--	err = dpni_set_rx_fs_dist(priv->mc_io, 0, priv->mc_token, &dist_cfg);
--	if (err)
--		dev_err(dev, "dpni_set_rx_fs_dist failed\n");
-+	for (i = 0; i < dpaa2_eth_tc_count(priv); i++) {
-+		dist_cfg.tc = i;
-+		err = dpni_set_rx_fs_dist(priv->mc_io, 0, priv->mc_token,
-+					  &dist_cfg);
-+		if (err) {
-+			dev_err(dev, "dpni_set_rx_fs_dist failed\n");
-+			break;
-+		}
-+	}
- 
- 	return err;
- }
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -291,7 +291,9 @@ struct dpaa2_eth_ch_stats {
- 
- /* Maximum number of queues associated with a DPNI */
- #define DPAA2_ETH_MAX_TCS		8
--#define DPAA2_ETH_MAX_RX_QUEUES		16
-+#define DPAA2_ETH_MAX_RX_QUEUES_PER_TC	16
-+#define DPAA2_ETH_MAX_RX_QUEUES		\
-+	(DPAA2_ETH_MAX_RX_QUEUES_PER_TC * DPAA2_ETH_MAX_TCS)
- #define DPAA2_ETH_MAX_TX_QUEUES		16
- #define DPAA2_ETH_MAX_QUEUES		(DPAA2_ETH_MAX_RX_QUEUES + \
- 					DPAA2_ETH_MAX_TX_QUEUES)
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-@@ -502,7 +502,7 @@ static int do_cls_rule(struct net_device
- 	dma_addr_t key_iova;
- 	u64 fields = 0;
- 	void *key_buf;
--	int err;
-+	int i, err;
- 
- 	if (fs->ring_cookie != RX_CLS_FLOW_DISC &&
- 	    fs->ring_cookie >= dpaa2_eth_queue_count(priv))
-@@ -562,11 +562,18 @@ static int do_cls_rule(struct net_device
- 			fs_act.options |= DPNI_FS_OPT_DISCARD;
- 		else
- 			fs_act.flow_id = fs->ring_cookie;
--		err = dpni_add_fs_entry(priv->mc_io, 0, priv->mc_token, 0,
--					fs->location, &rule_cfg, &fs_act);
--	} else {
--		err = dpni_remove_fs_entry(priv->mc_io, 0, priv->mc_token, 0,
--					   &rule_cfg);
-+	}
-+	for (i = 0; i < dpaa2_eth_tc_count(priv); i++) {
-+		if (add)
-+			err = dpni_add_fs_entry(priv->mc_io, 0, priv->mc_token,
-+						i, fs->location, &rule_cfg,
-+						&fs_act);
-+		else
-+			err = dpni_remove_fs_entry(priv->mc_io, 0,
-+						   priv->mc_token, i,
-+						   &rule_cfg);
-+		if (err)
-+			break;
- 	}
- 
- 	dma_unmap_single(dev, key_iova, rule_cfg.key_size * 2, DMA_TO_DEVICE);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0193-dpaa2-eth-Trim-debugfs-FQ-stats.patch b/target/linux/layerscape/patches-5.4/701-net-0193-dpaa2-eth-Trim-debugfs-FQ-stats.patch
deleted file mode 100644
index 1327b37e64..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0193-dpaa2-eth-Trim-debugfs-FQ-stats.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 2b19aa3f602c9d9d71959c6306c385927fb9578c Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Tue, 17 Sep 2019 16:53:03 +0300
-Subject: [PATCH] dpaa2-eth: Trim debugfs FQ stats
-
-With the addition of multiple traffic classes support, the number
-of available frame queues grew significantly, overly inflating the
-debugfs FQ statistics entry. Update it to only show the queues
-which are actually in use (i.e. have a non-zero frame counter).
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c
-@@ -90,6 +90,10 @@ static int dpaa2_dbg_fqs_show(struct seq
- 		if (err)
- 			fcnt = 0;
- 
-+		/* Skip FQs with no traffic */
-+		if (!fq->stats.frames && !fcnt)
-+			continue;
-+
- 		seq_printf(file, "%5d%16d%16d%16s%16llu%16u\n",
- 			   fq->fqid,
- 			   fq->target_cpu,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0194-dpaa2-eth-Distribute-ingress-frames-based-on-VLAN-pr.patch b/target/linux/layerscape/patches-5.4/701-net-0194-dpaa2-eth-Distribute-ingress-frames-based-on-VLAN-pr.patch
deleted file mode 100644
index 80e6afed34..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0194-dpaa2-eth-Distribute-ingress-frames-based-on-VLAN-pr.patch
+++ /dev/null
@@ -1,397 +0,0 @@
-From ea2e3b62b170e0f896aa837c8fec8085fb1063f8 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Tue, 3 Sep 2019 21:11:35 +0300
-Subject: [PATCH] dpaa2-eth: Distribute ingress frames based on VLAN prio
-
-Configure static ingress classification based on VLAN PCP field.
-If the DPNI doesn't have enough traffic classes to accommodate all
-priority levels, the lowest ones end up on TC 0 (default on miss).
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 116 ++++++++++++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h |   1 +
- drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h  |  34 ++++++
- drivers/net/ethernet/freescale/dpaa2/dpni.c      | 131 +++++++++++++++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpni.h      |  36 +++++++
- 5 files changed, 318 insertions(+)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -2608,6 +2608,118 @@ out_err:
- 	priv->enqueue = dpaa2_eth_enqueue_qd;
- }
- 
-+/* Configure ingress classification based on VLAN PCP */
-+static int set_vlan_qos(struct dpaa2_eth_priv *priv)
-+{
-+	struct device *dev = priv->net_dev->dev.parent;
-+	struct dpkg_profile_cfg kg_cfg = {0};
-+	struct dpni_qos_tbl_cfg qos_cfg = {0};
-+	struct dpni_rule_cfg key_params;
-+	void *dma_mem, *key, *mask;
-+	u8 key_size = 2;	/* VLAN TCI field */
-+	int i, pcp, err;
-+
-+	/* VLAN-based classification only makes sense if we have multiple
-+	 * traffic classes.
-+	 * Also, we need to extract just the 3-bit PCP field from the VLAN
-+	 * header and we can only do that by using a mask
-+	 */
-+	if (dpaa2_eth_tc_count(priv) == 1 || !dpaa2_eth_fs_mask_enabled(priv)) {
-+		dev_dbg(dev, "VLAN-based QoS classification not supported\n");
-+		return -ENOTSUPP;
-+	}
-+
-+	dma_mem = kzalloc(DPAA2_CLASSIFIER_DMA_SIZE, GFP_KERNEL);
-+	if (!dma_mem)
-+		return -ENOMEM;
-+
-+	kg_cfg.num_extracts = 1;
-+	kg_cfg.extracts[0].type = DPKG_EXTRACT_FROM_HDR;
-+	kg_cfg.extracts[0].extract.from_hdr.prot = NET_PROT_VLAN;
-+	kg_cfg.extracts[0].extract.from_hdr.type = DPKG_FULL_FIELD;
-+	kg_cfg.extracts[0].extract.from_hdr.field = NH_FLD_VLAN_TCI;
-+
-+	err =  dpni_prepare_key_cfg(&kg_cfg, dma_mem);
-+	if (err) {
-+		dev_err(dev, "dpni_prepare_key_cfg failed\n");
-+		goto out_free_tbl;
-+	}
-+
-+	/* set QoS table */
-+	qos_cfg.default_tc = 0;
-+	qos_cfg.discard_on_miss = 0;
-+	qos_cfg.key_cfg_iova = dma_map_single(dev, dma_mem,
-+					      DPAA2_CLASSIFIER_DMA_SIZE,
-+					      DMA_TO_DEVICE);
-+	if (dma_mapping_error(dev, qos_cfg.key_cfg_iova)) {
-+		dev_err(dev, "QoS table DMA mapping failed\n");
-+		err = -ENOMEM;
-+		goto out_free_tbl;
-+	}
-+
-+	err = dpni_set_qos_table(priv->mc_io, 0, priv->mc_token, &qos_cfg);
-+	if (err) {
-+		dev_err(dev, "dpni_set_qos_table failed\n");
-+		goto out_unmap_tbl;
-+	}
-+
-+	/* Add QoS table entries */
-+	key = kzalloc(key_size * 2, GFP_KERNEL);
-+	if (!key) {
-+		err = -ENOMEM;
-+		goto out_unmap_tbl;
-+	}
-+	mask = key + key_size;
-+	*(u16 *)mask = cpu_to_be16(VLAN_PRIO_MASK);
-+
-+	key_params.key_iova = dma_map_single(dev, key, key_size * 2,
-+					     DMA_TO_DEVICE);
-+	if (dma_mapping_error(dev, key_params.key_iova)) {
-+		dev_err(dev, "Qos table entry DMA mapping failed\n");
-+		err = -ENOMEM;
-+		goto out_free_key;
-+	}
-+
-+	key_params.mask_iova = key_params.key_iova + key_size;
-+	key_params.key_size = key_size;
-+
-+	/* We add rules for PCP-based distribution starting with highest
-+	 * priority (VLAN PCP = 7). If this DPNI doesn't have enough traffic
-+	 * classes to accommodate all priority levels, the lowest ones end up
-+	 * on TC 0 which was configured as default
-+	 */
-+	for (i = dpaa2_eth_tc_count(priv) - 1, pcp = 7; i >= 0; i--, pcp--) {
-+		*(u16 *)key = cpu_to_be16(pcp << VLAN_PRIO_SHIFT);
-+		dma_sync_single_for_device(dev, key_params.key_iova,
-+					   key_size * 2, DMA_TO_DEVICE);
-+
-+		err = dpni_add_qos_entry(priv->mc_io, 0, priv->mc_token,
-+					 &key_params, i, i);
-+		if (err) {
-+			dev_err(dev, "dpni_add_qos_entry failed\n");
-+			dpni_clear_qos_table(priv->mc_io, 0, priv->mc_token);
-+			goto out_unmap_key;
-+		}
-+	}
-+
-+	priv->vlan_cls_enabled = true;
-+
-+	/* Table and key memory is not persistent, clean everything up after
-+	 * configuration is finished
-+	 */
-+out_unmap_key:
-+	dma_unmap_single(dev, key_params.key_iova, key_size * 2, DMA_TO_DEVICE);
-+out_free_key:
-+	kfree(key);
-+out_unmap_tbl:
-+	dma_unmap_single(dev, qos_cfg.key_cfg_iova, DPAA2_CLASSIFIER_DMA_SIZE,
-+			 DMA_TO_DEVICE);
-+out_free_tbl:
-+	kfree(dma_mem);
-+
-+	return err;
-+}
-+
- /* Configure the DPNI object this interface is associated with */
- static int setup_dpni(struct fsl_mc_device *ls_dev)
- {
-@@ -2670,6 +2782,10 @@ static int setup_dpni(struct fsl_mc_devi
- 			goto close;
- 	}
- 
-+	err = set_vlan_qos(priv);
-+	if (err && err != -ENOTSUPP)
-+		goto close;
-+
- 	priv->cls_rules = devm_kzalloc(dev, sizeof(struct dpaa2_eth_cls_rule) *
- 				       dpaa2_eth_fs_count(priv), GFP_KERNEL);
- 	if (!priv->cls_rules) {
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -414,6 +414,7 @@ struct dpaa2_eth_priv {
- 	u64 rx_cls_fields;
- 	struct dpaa2_eth_cls_rule *cls_rules;
- 	u8 rx_cls_enabled;
-+	u8 vlan_cls_enabled;
- 	struct bpf_prog *xdp_prog;
- #ifdef CONFIG_DEBUG_FS
- 	struct dpaa2_debugfs dbg;
---- a/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-@@ -59,6 +59,10 @@
- 
- #define DPNI_CMDID_SET_RX_TC_DIST			DPNI_CMD(0x235)
- 
-+#define DPNI_CMDID_SET_QOS_TBL				DPNI_CMD(0x240)
-+#define DPNI_CMDID_ADD_QOS_ENT				DPNI_CMD(0x241)
-+#define DPNI_CMDID_REMOVE_QOS_ENT			DPNI_CMD(0x242)
-+#define DPNI_CMDID_CLR_QOS_TBL				DPNI_CMD(0x243)
- #define DPNI_CMDID_ADD_FS_ENT				DPNI_CMD(0x244)
- #define DPNI_CMDID_REMOVE_FS_ENT			DPNI_CMD(0x245)
- #define DPNI_CMDID_CLR_FS_ENT				DPNI_CMD(0x246)
-@@ -567,4 +571,34 @@ struct dpni_cmd_remove_fs_entry {
- 	__le64 mask_iova;
- };
- 
-+#define DPNI_DISCARD_ON_MISS_SHIFT	0
-+#define DPNI_DISCARD_ON_MISS_SIZE	1
-+
-+struct dpni_cmd_set_qos_table {
-+	__le32 pad;
-+	u8 default_tc;
-+	/* only the LSB */
-+	u8 discard_on_miss;
-+	__le16 pad1[21];
-+	__le64 key_cfg_iova;
-+};
-+
-+struct dpni_cmd_add_qos_entry {
-+	__le16 pad;
-+	u8 tc_id;
-+	u8 key_size;
-+	__le16 index;
-+	__le16 pad1;
-+	__le64 key_iova;
-+	__le64 mask_iova;
-+};
-+
-+struct dpni_cmd_remove_qos_entry {
-+	u8 pad[3];
-+	u8 key_size;
-+	__le32 pad1;
-+	__le64 key_iova;
-+	__le64 mask_iova;
-+};
-+
- #endif /* _FSL_DPNI_CMD_H */
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.c
-@@ -1786,3 +1786,134 @@ int dpni_remove_fs_entry(struct fsl_mc_i
- 	/* send command to mc*/
- 	return mc_send_command(mc_io, &cmd);
- }
-+
-+/**
-+ * dpni_set_qos_table() - Set QoS mapping table
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPNI object
-+ * @cfg:	QoS table configuration
-+ *
-+ * This function and all QoS-related functions require that
-+ *'max_tcs > 1' was set at DPNI creation.
-+ *
-+ * warning: Before calling this function, call dpkg_prepare_key_cfg() to
-+ *			prepare the key_cfg_iova parameter
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpni_set_qos_table(struct fsl_mc_io *mc_io,
-+		       u32 cmd_flags,
-+		       u16 token,
-+		       const struct dpni_qos_tbl_cfg *cfg)
-+{
-+	struct dpni_cmd_set_qos_table *cmd_params;
-+	struct fsl_mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_QOS_TBL,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpni_cmd_set_qos_table *)cmd.params;
-+	cmd_params->default_tc = cfg->default_tc;
-+	cmd_params->key_cfg_iova = cpu_to_le64(cfg->key_cfg_iova);
-+	dpni_set_field(cmd_params->discard_on_miss, DISCARD_ON_MISS,
-+		       cfg->discard_on_miss);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpni_add_qos_entry() - Add QoS mapping entry (to select a traffic class)
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPNI object
-+ * @cfg:	QoS rule to add
-+ * @tc_id:	Traffic class selection (0-7)
-+ * @index:	Location in the QoS table where to insert the entry.
-+ *		Only relevant if MASKING is enabled for QoS classification on
-+ *		this DPNI, it is ignored for exact match.
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpni_add_qos_entry(struct fsl_mc_io *mc_io,
-+		       u32 cmd_flags,
-+		       u16 token,
-+		       const struct dpni_rule_cfg *cfg,
-+		       u8 tc_id,
-+		       u16 index)
-+{
-+	struct dpni_cmd_add_qos_entry *cmd_params;
-+	struct fsl_mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPNI_CMDID_ADD_QOS_ENT,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpni_cmd_add_qos_entry *)cmd.params;
-+	cmd_params->tc_id = tc_id;
-+	cmd_params->key_size = cfg->key_size;
-+	cmd_params->index = cpu_to_le16(index);
-+	cmd_params->key_iova = cpu_to_le64(cfg->key_iova);
-+	cmd_params->mask_iova = cpu_to_le64(cfg->mask_iova);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpni_remove_qos_entry() - Remove QoS mapping entry
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPNI object
-+ * @cfg:	QoS rule to remove
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpni_remove_qos_entry(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  const struct dpni_rule_cfg *cfg)
-+{
-+	struct dpni_cmd_remove_qos_entry *cmd_params;
-+	struct fsl_mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPNI_CMDID_REMOVE_QOS_ENT,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpni_cmd_remove_qos_entry *)cmd.params;
-+	cmd_params->key_size = cfg->key_size;
-+	cmd_params->key_iova = cpu_to_le64(cfg->key_iova);
-+	cmd_params->mask_iova = cpu_to_le64(cfg->mask_iova);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpni_clear_qos_table() - Clear all QoS mapping entries
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPNI object
-+ *
-+ * Following this function call, all frames are directed to
-+ * the default traffic class (0)
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpni_clear_qos_table(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPNI_CMDID_CLR_QOS_TBL,
-+					  cmd_flags,
-+					  token);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.h
-@@ -716,6 +716,26 @@ int dpni_set_rx_hash_dist(struct fsl_mc_
- 			  const struct dpni_rx_dist_cfg *cfg);
- 
- /**
-+ * struct dpni_qos_tbl_cfg - Structure representing QOS table configuration
-+ * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with
-+ *		key extractions to be used as the QoS criteria by calling
-+ *		dpkg_prepare_key_cfg()
-+ * @discard_on_miss: Set to '1' to discard frames in case of no match (miss);
-+ *		'0' to use the 'default_tc' in such cases
-+ * @default_tc: Used in case of no-match and 'discard_on_miss'= 0
-+ */
-+struct dpni_qos_tbl_cfg {
-+	u64 key_cfg_iova;
-+	int discard_on_miss;
-+	u8 default_tc;
-+};
-+
-+int dpni_set_qos_table(struct fsl_mc_io *mc_io,
-+		       u32 cmd_flags,
-+		       u16 token,
-+		       const struct dpni_qos_tbl_cfg *cfg);
-+
-+/**
-  * enum dpni_dest - DPNI destination types
-  * @DPNI_DEST_NONE: Unassigned destination; The queue is set in parked mode and
-  *		does not generate FQDAN notifications; user is expected to
-@@ -961,6 +981,22 @@ int dpni_remove_fs_entry(struct fsl_mc_i
- 			 u8 tc_id,
- 			 const struct dpni_rule_cfg *cfg);
- 
-+int dpni_add_qos_entry(struct fsl_mc_io *mc_io,
-+		       u32 cmd_flags,
-+		       u16 token,
-+		       const struct dpni_rule_cfg *cfg,
-+		       u8 tc_id,
-+		       u16 index);
-+
-+int dpni_remove_qos_entry(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token,
-+			  const struct dpni_rule_cfg *cfg);
-+
-+int dpni_clear_qos_table(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token);
-+
- int dpni_get_api_version(struct fsl_mc_io *mc_io,
- 			 u32 cmd_flags,
- 			 u16 *major_ver,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0195-dpaa2-eth-Add-helper-functions.patch b/target/linux/layerscape/patches-5.4/701-net-0195-dpaa2-eth-Add-helper-functions.patch
deleted file mode 100644
index 37cbbca727..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0195-dpaa2-eth-Add-helper-functions.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 1ffb57beaefe23ceeb526bc238351f7725502571 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Mon, 16 Sep 2019 21:04:49 +0300
-Subject: [PATCH] dpaa2-eth: Add helper functions
-
-Add convenient helper functions that determines whether Rx/Tx pause
-frames are enabled based on link state flags received from firmware.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c     |  3 +--
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h     | 11 +++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c |  5 ++---
- 3 files changed, 14 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -1276,8 +1276,7 @@ static int link_state_update(struct dpaa
- 	 * Rx FQ taildrop configuration as well. We configure taildrop
- 	 * only when pause frame generation is disabled.
- 	 */
--	tx_pause = !!(state.options & DPNI_LINK_OPT_PAUSE) ^
--		   !!(state.options & DPNI_LINK_OPT_ASYM_PAUSE);
-+	tx_pause = dpaa2_eth_tx_pause_enabled(state.options);
- 	dpaa2_eth_set_rx_taildrop(priv, !tx_pause);
- 
- 	/* Chech link state; speed / duplex changes are not treated yet */
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -495,6 +495,17 @@ enum dpaa2_eth_rx_dist {
- 	(dpaa2_eth_cmp_dpni_ver((priv), DPNI_PAUSE_VER_MAJOR,	\
- 				DPNI_PAUSE_VER_MINOR) >= 0)
- 
-+static inline bool dpaa2_eth_tx_pause_enabled(u64 link_options)
-+{
-+	return !!(link_options & DPNI_LINK_OPT_PAUSE) ^
-+	       !!(link_options & DPNI_LINK_OPT_ASYM_PAUSE);
-+}
-+
-+static inline bool dpaa2_eth_rx_pause_enabled(u64 link_options)
-+{
-+	return !!(link_options & DPNI_LINK_OPT_PAUSE);
-+}
-+
- static inline
- unsigned int dpaa2_eth_needed_headroom(struct dpaa2_eth_priv *priv,
- 				       struct sk_buff *skb)
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-@@ -99,9 +99,8 @@ static void dpaa2_eth_get_pauseparam(str
- 	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
- 	u64 link_options = priv->link_state.options;
- 
--	pause->rx_pause = !!(link_options & DPNI_LINK_OPT_PAUSE);
--	pause->tx_pause = pause->rx_pause ^
--			  !!(link_options & DPNI_LINK_OPT_ASYM_PAUSE);
-+	pause->rx_pause = dpaa2_eth_rx_pause_enabled(link_options);
-+	pause->tx_pause = dpaa2_eth_tx_pause_enabled(link_options);
- 	pause->autoneg = AUTONEG_DISABLE;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0196-dpaa2-eth-Minor-cleanup-in-dpaa2_eth_set_rx_taildrop.patch b/target/linux/layerscape/patches-5.4/701-net-0196-dpaa2-eth-Minor-cleanup-in-dpaa2_eth_set_rx_taildrop.patch
deleted file mode 100644
index 03c7ad5344..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0196-dpaa2-eth-Minor-cleanup-in-dpaa2_eth_set_rx_taildrop.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 965b47cbf16a6d1bc8235e1bff038abc9b4cf142 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Wed, 4 Sep 2019 19:45:01 +0300
-Subject: [PATCH] dpaa2-eth: Minor cleanup in dpaa2_eth_set_rx_taildrop()
-
-Make clear the setting refers to FQ-based taildrop and the threshold
-value is given in bytes (the default option).
-
-Reverse the logic of the second argument (pass tx_pause transparently).
-This will be helpful further on.
-
-Also don't set the device's Rx taildrop flag unless configuration
-succeeds.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 19 +++++++++++--------
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h |  4 ++--
- 2 files changed, 13 insertions(+), 10 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -1228,17 +1228,20 @@ static void disable_ch_napi(struct dpaa2
- 	}
- }
- 
--static void dpaa2_eth_set_rx_taildrop(struct dpaa2_eth_priv *priv, bool enable)
-+static void dpaa2_eth_set_rx_taildrop(struct dpaa2_eth_priv *priv,
-+				      bool tx_pause)
- {
- 	struct dpni_taildrop td = {0};
- 	struct dpaa2_eth_fq *fq;
- 	int i, err;
- 
--	if (priv->rx_td_enabled == enable)
-+	td.enable = !tx_pause;
-+	if (priv->rx_td_enabled == td.enable)
- 		return;
- 
--	td.enable = enable;
--	td.threshold = DPAA2_ETH_TAILDROP_THRESH;
-+	/* FQ taildrop: thrshold is in bytes, per frame queue */
-+	td.threshold = DPAA2_ETH_FQ_TAILDROP_THRESH;
-+	td.units = DPNI_CONGESTION_UNIT_BYTES;
- 
- 	for (i = 0; i < priv->num_fqs; i++) {
- 		fq = &priv->fq[i];
-@@ -1249,12 +1252,12 @@ static void dpaa2_eth_set_rx_taildrop(st
- 					fq->tc, fq->flowid, &td);
- 		if (err) {
- 			netdev_err(priv->net_dev,
--				   "dpni_set_taildrop() failed\n");
--			break;
-+				   "dpni_set_taildrop(FQ) failed\n");
-+			return;
- 		}
- 	}
- 
--	priv->rx_td_enabled = enable;
-+	priv->rx_td_enabled = td.enable;
- }
- 
- static void update_tx_fqids(struct dpaa2_eth_priv *priv);
-@@ -1277,7 +1280,7 @@ static int link_state_update(struct dpaa
- 	 * only when pause frame generation is disabled.
- 	 */
- 	tx_pause = dpaa2_eth_tx_pause_enabled(state.options);
--	dpaa2_eth_set_rx_taildrop(priv, !tx_pause);
-+	dpaa2_eth_set_rx_taildrop(priv, tx_pause);
- 
- 	/* Chech link state; speed / duplex changes are not treated yet */
- 	if (priv->link_state.up == state.up)
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -39,7 +39,7 @@
-  * frames in the Rx queues (length of the current frame is not
-  * taken into account when making the taildrop decision)
-  */
--#define DPAA2_ETH_TAILDROP_THRESH	(64 * 1024)
-+#define DPAA2_ETH_FQ_TAILDROP_THRESH	(64 * 1024)
- 
- /* Maximum number of Tx confirmation frames to be processed
-  * in a single NAPI call
-@@ -51,7 +51,7 @@
-  * how many 64B frames fit inside the taildrop threshold and add a margin
-  * to accommodate the buffer refill delay.
-  */
--#define DPAA2_ETH_MAX_FRAMES_PER_QUEUE	(DPAA2_ETH_TAILDROP_THRESH / 64)
-+#define DPAA2_ETH_MAX_FRAMES_PER_QUEUE	(DPAA2_ETH_FQ_TAILDROP_THRESH / 64)
- #define DPAA2_ETH_NUM_BUFS		(DPAA2_ETH_MAX_FRAMES_PER_QUEUE + 256)
- #define DPAA2_ETH_REFILL_THRESH \
- 	(DPAA2_ETH_NUM_BUFS - DPAA2_ETH_BUFS_PER_CMD)
diff --git a/target/linux/layerscape/patches-5.4/701-net-0197-dpaa2-eth-Add-congestion-group-taildrop.patch b/target/linux/layerscape/patches-5.4/701-net-0197-dpaa2-eth-Add-congestion-group-taildrop.patch
deleted file mode 100644
index 9125b94351..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0197-dpaa2-eth-Add-congestion-group-taildrop.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From fa204fc76c3936c55315ba9423fa7c920af2f9a9 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Wed, 4 Sep 2019 20:32:56 +0300
-Subject: [PATCH] dpaa2-eth: Add congestion group taildrop
-
-The increase in number of ingress frame queues means we now risk
-depleting the buffer pool before the FQ taildrop kicks in.
-
-Congestion group taildrop allows us to control the number of frames
-that can accumulate on a group of Rx frame queues belonging to the
-same traffic class.
-
-This setting coexists with the frame queue based taildrop: whichever
-limit gets hit first triggers the frame drop.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 16 ++++++++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h |  9 +++++++++
- 2 files changed, 25 insertions(+)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -1257,6 +1257,22 @@ static void dpaa2_eth_set_rx_taildrop(st
- 		}
- 	}
- 
-+	/* Congestion group taildrop: threshold is in frames, per group
-+	 * of FQs belonging to the same traffic class
-+	 */
-+	td.threshold = DPAA2_ETH_CG_TAILDROP_THRESH(priv);
-+	td.units = DPNI_CONGESTION_UNIT_FRAMES;
-+	for (i = 0; i < dpaa2_eth_tc_count(priv); i++) {
-+		err = dpni_set_taildrop(priv->mc_io, 0, priv->mc_token,
-+					DPNI_CP_GROUP, DPNI_QUEUE_RX,
-+					i, 0, &td);
-+		if (err) {
-+			netdev_err(priv->net_dev,
-+				   "dpni_set_taildrop(CG) failed\n");
-+			return;
-+		}
-+	}
-+
- 	priv->rx_td_enabled = td.enable;
- }
- 
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -56,6 +56,15 @@
- #define DPAA2_ETH_REFILL_THRESH \
- 	(DPAA2_ETH_NUM_BUFS - DPAA2_ETH_BUFS_PER_CMD)
- 
-+/* Congestion group taildrop threshold: number of frames allowed to accumulate
-+ * at any moment in a group of Rx queues belonging to the same traffic class.
-+ * Choose value such that we don't risk depleting the buffer pool before the
-+ * taildrop kicks in
-+ */
-+#define DPAA2_ETH_CG_TAILDROP_THRESH(priv)				\
-+	(DPAA2_ETH_MAX_FRAMES_PER_QUEUE * dpaa2_eth_queue_count(priv) /	\
-+	 dpaa2_eth_tc_count(priv))
-+
- /* Maximum number of buffers that can be acquired/released through a single
-  * QBMan command
-  */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0198-dpaa2-eth-Update-FQ-taildrop-threshold-and-buffer-po.patch b/target/linux/layerscape/patches-5.4/701-net-0198-dpaa2-eth-Update-FQ-taildrop-threshold-and-buffer-po.patch
deleted file mode 100644
index d9f025f963..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0198-dpaa2-eth-Update-FQ-taildrop-threshold-and-buffer-po.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 0c7cb8b132f28cd150eb578a73c959de736364a2 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Mon, 16 Sep 2019 13:15:02 +0300
-Subject: [PATCH] dpaa2-eth: Update FQ taildrop threshold and buffer pool count
-
-Now that we have congestion group taildrop configured at all
-times, we can afford to increase the frame queue taildrop
-threshold; this will ensure a better response when receiving
-bursts of large-sized frames.
-
-Also decouple the buffer pool count from the Rx FQ taildrop
-threshold, as above change would increase it too much. Instead,
-keep the old count as a hardcoded value.
-
-With the new limits, we try to ensure that:
-* we allow enough leeway for large frame bursts (by buffering
-enough of them in queues to avoid heavy dropping in case of
-bursty traffic, but when overall ingress bandwidth is manageable)
-* allow pending frames to be evenly spread between ingress FQs,
-regardless of frame size
-* avoid dropping frames due to the buffer pool being empty; this
-is not a bad behaviour per se, but system overall response is
-more linear and predictable when frames are dropped at frame
-queue/group level.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 23 +++++++++++------------
- 1 file changed, 11 insertions(+), 12 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -35,24 +35,24 @@
- /* Convert L3 MTU to L2 MFL */
- #define DPAA2_ETH_L2_MAX_FRM(mtu)	((mtu) + VLAN_ETH_HLEN)
- 
--/* Set the taildrop threshold (in bytes) to allow the enqueue of several jumbo
-- * frames in the Rx queues (length of the current frame is not
-- * taken into account when making the taildrop decision)
-+/* Set the taildrop threshold (in bytes) to allow the enqueue of a large
-+ * enuough number of jumbo frames in the Rx queues (length of the current
-+ * frame is not taken into account when making the taildrop decision)
-  */
--#define DPAA2_ETH_FQ_TAILDROP_THRESH	(64 * 1024)
-+#define DPAA2_ETH_FQ_TAILDROP_THRESH	(1024 * 1024)
- 
- /* Maximum number of Tx confirmation frames to be processed
-  * in a single NAPI call
-  */
- #define DPAA2_ETH_TXCONF_PER_NAPI	256
- 
--/* Buffer quota per queue. Must be large enough such that for minimum sized
-- * frames taildrop kicks in before the bpool gets depleted, so we compute
-- * how many 64B frames fit inside the taildrop threshold and add a margin
-- * to accommodate the buffer refill delay.
-+/* Buffer qouta per channel. We want to keep in check number of ingress frames
-+ * in flight: for small sized frames, congestion group taildrop may kick in
-+ * first; for large sizes, Rx FQ taildrop threshold will ensure only a
-+ * reasonable number of frames will be pending at any given time.
-+ * Ingress frame drop due to buffer pool depletion should be a corner case only
-  */
--#define DPAA2_ETH_MAX_FRAMES_PER_QUEUE	(DPAA2_ETH_FQ_TAILDROP_THRESH / 64)
--#define DPAA2_ETH_NUM_BUFS		(DPAA2_ETH_MAX_FRAMES_PER_QUEUE + 256)
-+#define DPAA2_ETH_NUM_BUFS		1280
- #define DPAA2_ETH_REFILL_THRESH \
- 	(DPAA2_ETH_NUM_BUFS - DPAA2_ETH_BUFS_PER_CMD)
- 
-@@ -62,8 +62,7 @@
-  * taildrop kicks in
-  */
- #define DPAA2_ETH_CG_TAILDROP_THRESH(priv)				\
--	(DPAA2_ETH_MAX_FRAMES_PER_QUEUE * dpaa2_eth_queue_count(priv) /	\
--	 dpaa2_eth_tc_count(priv))
-+	(1024 * dpaa2_eth_queue_count(priv) / dpaa2_eth_tc_count(priv))
- 
- /* Maximum number of buffers that can be acquired/released through a single
-  * QBMan command
diff --git a/target/linux/layerscape/patches-5.4/701-net-0199-dpaa2-eth-Add-DCB-ops.patch b/target/linux/layerscape/patches-5.4/701-net-0199-dpaa2-eth-Add-DCB-ops.patch
deleted file mode 100644
index 965212ed54..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0199-dpaa2-eth-Add-DCB-ops.patch
+++ /dev/null
@@ -1,154 +0,0 @@
-From a893019278e8030fbe251cdaa9d93b8257d1c083 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Thu, 5 Sep 2019 19:31:32 +0300
-Subject: [PATCH] dpaa2-eth: Add DCB ops
-
-Add a skeleton implementation of DCB PFC ops. Actual hardware
-configuration to be added in further commits.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/Kconfig     |  9 +++
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 84 ++++++++++++++++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h |  5 ++
- 3 files changed, 98 insertions(+)
-
---- a/drivers/net/ethernet/freescale/dpaa2/Kconfig
-+++ b/drivers/net/ethernet/freescale/dpaa2/Kconfig
-@@ -8,6 +8,15 @@ config FSL_DPAA2_ETH
- 	  The driver manages network objects discovered on the Freescale
- 	  MC bus.
- 
-+if FSL_DPAA2_ETH
-+config FSL_DPAA2_ETH_DCB
-+	bool "Data Center Bridging (DCB) Support"
-+	default n
-+	depends on DCB
-+	help
-+	  Enable Priority-Based Flow Control (PFC) support in the driver
-+endif
-+
- config FSL_DPAA2_PTP_CLOCK
- 	tristate "Freescale DPAA2 PTP Clock"
- 	depends on FSL_DPAA2_ETH && PTP_1588_CLOCK_QORIQ
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -3614,6 +3614,81 @@ static void del_ch_napi(struct dpaa2_eth
- 	}
- }
- 
-+#ifdef CONFIG_FSL_DPAA2_ETH_DCB
-+static int dpaa2_eth_dcbnl_ieee_getpfc(struct net_device *net_dev,
-+				       struct ieee_pfc *pfc)
-+{
-+	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-+
-+	memcpy(pfc, &priv->pfc, sizeof(priv->pfc));
-+	pfc->pfc_cap = dpaa2_eth_tc_count(priv);
-+
-+	return 0;
-+}
-+
-+static int dpaa2_eth_dcbnl_ieee_setpfc(struct net_device *net_dev,
-+				       struct ieee_pfc *pfc)
-+{
-+	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-+
-+	if (pfc->mbc || pfc->delay)
-+		return -EOPNOTSUPP;
-+
-+	/* If same PFC enabled mask, nothing to do */
-+	if (priv->pfc.pfc_en == pfc->pfc_en)
-+		return 0;
-+
-+	memcpy(&priv->pfc, pfc, sizeof(priv->pfc));
-+
-+	return 0;
-+}
-+
-+static u8 dpaa2_eth_dcbnl_getdcbx(struct net_device *net_dev)
-+{
-+	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-+
-+	return priv->dcbx_mode;
-+}
-+
-+static u8 dpaa2_eth_dcbnl_setdcbx(struct net_device *net_dev, u8 mode)
-+{
-+	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-+
-+	priv->dcbx_mode = mode;
-+	return 0;
-+}
-+
-+static u8 dpaa2_eth_dcbnl_getcap(struct net_device *net_dev, int capid, u8 *cap)
-+{
-+	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-+
-+	switch (capid) {
-+	case DCB_CAP_ATTR_PFC:
-+		*cap = true;
-+		break;
-+	case DCB_CAP_ATTR_PFC_TCS:
-+		*cap = 1 << (dpaa2_eth_tc_count(priv) - 1);
-+		break;
-+	case DCB_CAP_ATTR_DCBX:
-+		*cap = priv->dcbx_mode;
-+		break;
-+	default:
-+		*cap = false;
-+		break;
-+	}
-+
-+	return 0;
-+}
-+
-+const struct dcbnl_rtnl_ops dpaa2_eth_dcbnl_ops = {
-+	.ieee_getpfc	= dpaa2_eth_dcbnl_ieee_getpfc,
-+	.ieee_setpfc	= dpaa2_eth_dcbnl_ieee_setpfc,
-+	.getdcbx	= dpaa2_eth_dcbnl_getdcbx,
-+	.setdcbx	= dpaa2_eth_dcbnl_setdcbx,
-+	.getcap		= dpaa2_eth_dcbnl_getcap,
-+};
-+#endif
-+
- static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev)
- {
- 	struct device *dev;
-@@ -3703,6 +3778,15 @@ static int dpaa2_eth_probe(struct fsl_mc
- 	if (err)
- 		goto err_alloc_rings;
- 
-+#ifdef CONFIG_FSL_DPAA2_ETH_DCB
-+	if (dpaa2_eth_has_pause_support(priv) && priv->vlan_cls_enabled) {
-+		priv->dcbx_mode = DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE;
-+		net_dev->dcbnl_ops = &dpaa2_eth_dcbnl_ops;
-+	} else {
-+		dev_dbg(dev, "PFC not supported\n");
-+	}
-+#endif
-+
- 	err = setup_irqs(dpni_dev);
- 	if (err) {
- 		netdev_warn(net_dev, "Failed to set link interrupt, fall back to polling\n");
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -6,6 +6,7 @@
- #ifndef __DPAA2_ETH_H
- #define __DPAA2_ETH_H
- 
-+#include <linux/dcbnl.h>
- #include <linux/netdevice.h>
- #include <linux/if_vlan.h>
- #include <linux/fsl/mc.h>
-@@ -423,6 +424,10 @@ struct dpaa2_eth_priv {
- 	struct dpaa2_eth_cls_rule *cls_rules;
- 	u8 rx_cls_enabled;
- 	u8 vlan_cls_enabled;
-+#ifdef CONFIG_FSL_DPAA2_ETH_DCB
-+	u8 dcbx_mode;
-+	struct ieee_pfc pfc;
-+#endif
- 	struct bpf_prog *xdp_prog;
- #ifdef CONFIG_DEBUG_FS
- 	struct dpaa2_debugfs dbg;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0200-dpaa2-eth-Enable-Rx-PFC.patch b/target/linux/layerscape/patches-5.4/701-net-0200-dpaa2-eth-Enable-Rx-PFC.patch
deleted file mode 100644
index 4396f2ea8e..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0200-dpaa2-eth-Enable-Rx-PFC.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 7a342f60e569047e1632f6af91f503993769a2ec Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Tue, 17 Sep 2019 19:51:15 +0300
-Subject: [PATCH] dpaa2-eth: Enable Rx PFC
-
-Instruct the hardware to respond to received PFC frames.
-
-Current firmware doesn't allow us to selectively enable PFC
-on the Rx side for some priorities only, so we will react to
-all incoming PFC frames (and stop transmitting on the traffic
-classes specified in the frame).
-
-PFC depends on the PAUSE flag also being set in link options.
-Don't set it implicitly when user configures PFC, but issue
-a warning if the two settings are not in sync.
-
-For the Tx side, setting the PFC_PAUSE flag in the link options
-is necessary but not sufficient, so PFC frame generation is
-not enabled yet.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 23 +++++++++++++++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpni.h      |  5 +++++
- 2 files changed, 28 insertions(+)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -3620,6 +3620,9 @@ static int dpaa2_eth_dcbnl_ieee_getpfc(s
- {
- 	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
- 
-+	if (!(priv->link_state.options & DPNI_LINK_OPT_PFC_PAUSE))
-+		return 0;
-+
- 	memcpy(pfc, &priv->pfc, sizeof(priv->pfc));
- 	pfc->pfc_cap = dpaa2_eth_tc_count(priv);
- 
-@@ -3630,6 +3633,8 @@ static int dpaa2_eth_dcbnl_ieee_setpfc(s
- 				       struct ieee_pfc *pfc)
- {
- 	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-+	struct dpni_link_cfg link_cfg = {0};
-+	int err;
- 
- 	if (pfc->mbc || pfc->delay)
- 		return -EOPNOTSUPP;
-@@ -3638,6 +3643,24 @@ static int dpaa2_eth_dcbnl_ieee_setpfc(s
- 	if (priv->pfc.pfc_en == pfc->pfc_en)
- 		return 0;
- 
-+	/* We allow PFC configuration even if it won't have any effect until
-+	 * general pause frames are enabled
-+	 */
-+	if (!dpaa2_eth_rx_pause_enabled(priv->link_state.options))
-+		netdev_warn(net_dev, "Pause support must be enabled in order for PFC to work!\n");
-+
-+	link_cfg.rate = priv->link_state.rate;
-+	link_cfg.options = priv->link_state.options;
-+	if (pfc->pfc_en)
-+		link_cfg.options |= DPNI_LINK_OPT_PFC_PAUSE;
-+	else
-+		link_cfg.options &= ~DPNI_LINK_OPT_PFC_PAUSE;
-+	err = dpni_set_link_cfg(priv->mc_io, 0, priv->mc_token, &link_cfg);
-+	if (err) {
-+		netdev_err(net_dev, "dpni_set_link_cfg failed\n");
-+		return err;
-+	}
-+
- 	memcpy(&priv->pfc, pfc, sizeof(priv->pfc));
- 
- 	return 0;
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.h
-@@ -514,6 +514,11 @@ int dpni_get_statistics(struct fsl_mc_io
- #define DPNI_LINK_OPT_ASYM_PAUSE	0x0000000000000008ULL
- 
- /**
-+ * Enable priority flow control pause frames
-+ */
-+#define DPNI_LINK_OPT_PFC_PAUSE		0x0000000000000010ULL
-+
-+/**
-  * struct - Structure representing DPNI link configuration
-  * @rate: Rate
-  * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values
diff --git a/target/linux/layerscape/patches-5.4/701-net-0201-dpaa2-eth-Enable-Tx-PFC.patch b/target/linux/layerscape/patches-5.4/701-net-0201-dpaa2-eth-Enable-Tx-PFC.patch
deleted file mode 100644
index 7d18504070..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0201-dpaa2-eth-Enable-Tx-PFC.patch
+++ /dev/null
@@ -1,263 +0,0 @@
-From 07fb72fb5b3d2faeeb742ae573aa54a4a1eeee12 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Tue, 17 Sep 2019 20:36:08 +0300
-Subject: [PATCH] dpaa2-eth: Enable Tx PFC
-
-Configure the hardware to generate PFC frames based on Rx congestion
-notifications. When a certain number of frames accumulate in the
-ingress queues corresponding to a traffic class, priority flow control
-frames are generated for that TC.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 49 ++++++++++++++++++++-
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 11 +++++
- drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h  | 25 +++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpni.c      | 46 +++++++++++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpni.h      | 56 ++++++++++++++++++++++++
- 5 files changed, 186 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -3629,6 +3629,47 @@ static int dpaa2_eth_dcbnl_ieee_getpfc(s
- 	return 0;
- }
- 
-+static inline bool is_prio_enabled(u8 pfc_en, u8 tc)
-+{
-+	return !!(pfc_en & (1 << tc));
-+}
-+
-+static int set_pfc_cn(struct dpaa2_eth_priv *priv, u8 pfc_en)
-+{
-+	struct dpni_congestion_notification_cfg cfg = {0};
-+	int i, err;
-+
-+	cfg.notification_mode = DPNI_CONG_OPT_FLOW_CONTROL;
-+	cfg.units = DPNI_CONGESTION_UNIT_FRAMES;
-+	cfg.message_iova = 0ULL;
-+	cfg.message_ctx = 0ULL;
-+
-+	for (i = 0; i < dpaa2_eth_tc_count(priv); i++) {
-+		if (is_prio_enabled(pfc_en, i)) {
-+			cfg.threshold_entry = DPAA2_ETH_CN_THRESH_ENTRY(priv);
-+			cfg.threshold_exit = DPAA2_ETH_CN_THRESH_EXIT(priv);
-+		} else {
-+			/* For priorities not set in the pfc_en mask, we leave
-+			 * the congestion thresholds at zero, which effectively
-+			 * disables generation of PFC frames for them
-+			 */
-+			cfg.threshold_entry = 0;
-+			cfg.threshold_exit = 0;
-+		}
-+
-+		err = dpni_set_congestion_notification(priv->mc_io, 0,
-+						       priv->mc_token,
-+						       DPNI_QUEUE_RX, i, &cfg);
-+		if (err) {
-+			netdev_err(priv->net_dev,
-+				   "dpni_set_congestion_notification failed\n");
-+			return err;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
- static int dpaa2_eth_dcbnl_ieee_setpfc(struct net_device *net_dev,
- 				       struct ieee_pfc *pfc)
- {
-@@ -3646,7 +3687,8 @@ static int dpaa2_eth_dcbnl_ieee_setpfc(s
- 	/* We allow PFC configuration even if it won't have any effect until
- 	 * general pause frames are enabled
- 	 */
--	if (!dpaa2_eth_rx_pause_enabled(priv->link_state.options))
-+	if (!dpaa2_eth_rx_pause_enabled(priv->link_state.options) ||
-+	    !dpaa2_eth_tx_pause_enabled(priv->link_state.options))
- 		netdev_warn(net_dev, "Pause support must be enabled in order for PFC to work!\n");
- 
- 	link_cfg.rate = priv->link_state.rate;
-@@ -3661,6 +3703,11 @@ static int dpaa2_eth_dcbnl_ieee_setpfc(s
- 		return err;
- 	}
- 
-+	/* Configure congestion notifications for the enabled priorities */
-+	err = set_pfc_cn(priv, pfc->pfc_en);
-+	if (err)
-+		return err;
-+
- 	memcpy(&priv->pfc, pfc, sizeof(priv->pfc));
- 
- 	return 0;
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -65,6 +65,17 @@
- #define DPAA2_ETH_CG_TAILDROP_THRESH(priv)				\
- 	(1024 * dpaa2_eth_queue_count(priv) / dpaa2_eth_tc_count(priv))
- 
-+/* Congestion group notification threshold: when this many frames accumulate
-+ * on the Rx queues belonging to the same TC, the MAC is instructed to send
-+ * PFC frames for that TC.
-+ * When number of pending frames drops below exit threshold transmission of
-+ * PFC frames is stopped.
-+ */
-+#define DPAA2_ETH_CN_THRESH_ENTRY(priv) \
-+	(DPAA2_ETH_CG_TAILDROP_THRESH(priv) / 2)
-+#define DPAA2_ETH_CN_THRESH_EXIT(priv) \
-+	(DPAA2_ETH_CN_THRESH_ENTRY(priv) * 3 / 4)
-+
- /* Maximum number of buffers that can be acquired/released through a single
-  * QBMan command
-  */
---- a/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-@@ -601,4 +601,29 @@ struct dpni_cmd_remove_qos_entry {
- 	__le64 mask_iova;
- };
- 
-+#define DPNI_DEST_TYPE_SHIFT		0
-+#define DPNI_DEST_TYPE_SIZE		4
-+#define DPNI_CONG_UNITS_SHIFT		4
-+#define DPNI_CONG_UNITS_SIZE		2
-+
-+struct dpni_cmd_set_congestion_notification {
-+	/* cmd word 0 */
-+	u8 qtype;
-+	u8 tc;
-+	u8 pad[6];
-+	/* cmd word 1 */
-+	__le32 dest_id;
-+	__le16 notification_mode;
-+	u8 dest_priority;
-+	/* from LSB: dest_type: 4 units:2 */
-+	u8 type_units;
-+	/* cmd word 2 */
-+	__le64 message_iova;
-+	/* cmd word 3 */
-+	__le64 message_ctx;
-+	/* cmd word 4 */
-+	__le32 threshold_entry;
-+	__le32 threshold_exit;
-+};
-+
- #endif /* _FSL_DPNI_CMD_H */
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.c
-@@ -1355,6 +1355,52 @@ int dpni_set_rx_tc_dist(struct fsl_mc_io
- }
- 
- /**
-+ * dpni_set_congestion_notification() - Set traffic class congestion
-+ *					notification configuration
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPNI object
-+ * @qtype:	Type of queue - Rx, Tx and Tx confirm types are supported
-+ * @tc_id:	Traffic class selection (0-7)
-+ * @cfg:	Congestion notification configuration
-+ *
-+ * Return:	'0' on Success; error code otherwise.
-+ */
-+int dpni_set_congestion_notification(
-+			struct fsl_mc_io *mc_io,
-+			u32 cmd_flags,
-+			u16 token,
-+			enum dpni_queue_type qtype,
-+			u8 tc_id,
-+			const struct dpni_congestion_notification_cfg *cfg)
-+{
-+	struct dpni_cmd_set_congestion_notification *cmd_params;
-+	struct fsl_mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header =
-+		mc_encode_cmd_header(DPNI_CMDID_SET_CONGESTION_NOTIFICATION,
-+				     cmd_flags,
-+				     token);
-+	cmd_params = (struct dpni_cmd_set_congestion_notification *)cmd.params;
-+	cmd_params->qtype = qtype;
-+	cmd_params->tc = tc_id;
-+	cmd_params->dest_id = cpu_to_le32(cfg->dest_cfg.dest_id);
-+	cmd_params->notification_mode = cpu_to_le16(cfg->notification_mode);
-+	cmd_params->dest_priority = cfg->dest_cfg.priority;
-+	dpni_set_field(cmd_params->type_units, DEST_TYPE,
-+		       cfg->dest_cfg.dest_type);
-+	dpni_set_field(cmd_params->type_units, CONG_UNITS, cfg->units);
-+	cmd_params->message_iova = cpu_to_le64(cfg->message_iova);
-+	cmd_params->message_ctx = cpu_to_le64(cfg->message_ctx);
-+	cmd_params->threshold_entry = cpu_to_le32(cfg->threshold_entry);
-+	cmd_params->threshold_exit = cpu_to_le32(cfg->threshold_exit);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-  * dpni_set_queue() - Set queue parameters
-  * @mc_io:	Pointer to MC portal's I/O object
-  * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.h
-@@ -883,6 +883,62 @@ enum dpni_congestion_point {
- };
- 
- /**
-+ * struct dpni_dest_cfg - Structure representing DPNI destination parameters
-+ * @dest_type:	Destination type
-+ * @dest_id:	Either DPIO ID or DPCON ID, depending on the destination type
-+ * @priority:	Priority selection within the DPIO or DPCON channel; valid
-+ *		values are 0-1 or 0-7, depending on the number of priorities
-+ *		in that channel; not relevant for 'DPNI_DEST_NONE' option
-+ */
-+struct dpni_dest_cfg {
-+	enum dpni_dest dest_type;
-+	int dest_id;
-+	u8 priority;
-+};
-+
-+/* DPNI congestion options */
-+
-+/**
-+ * This congestion will trigger flow control or priority flow control.
-+ * This will have effect only if flow control is enabled with
-+ * dpni_set_link_cfg().
-+ */
-+#define DPNI_CONG_OPT_FLOW_CONTROL		0x00000040
-+
-+/**
-+ * struct dpni_congestion_notification_cfg - congestion notification
-+ *					configuration
-+ * @units: Units type
-+ * @threshold_entry: Above this threshold we enter a congestion state.
-+ *		set it to '0' to disable it
-+ * @threshold_exit: Below this threshold we exit the congestion state.
-+ * @message_ctx: The context that will be part of the CSCN message
-+ * @message_iova: I/O virtual address (must be in DMA-able memory),
-+ *		must be 16B aligned; valid only if 'DPNI_CONG_OPT_WRITE_MEM_<X>'
-+ *		is contained in 'options'
-+ * @dest_cfg: CSCN can be send to either DPIO or DPCON WQ channel
-+ * @notification_mode: Mask of available options; use 'DPNI_CONG_OPT_<X>' values
-+ */
-+
-+struct dpni_congestion_notification_cfg {
-+	enum dpni_congestion_unit units;
-+	u32 threshold_entry;
-+	u32 threshold_exit;
-+	u64 message_ctx;
-+	u64 message_iova;
-+	struct dpni_dest_cfg dest_cfg;
-+	u16 notification_mode;
-+};
-+
-+int dpni_set_congestion_notification(
-+			struct fsl_mc_io *mc_io,
-+			u32 cmd_flags,
-+			u16 token,
-+			enum dpni_queue_type qtype,
-+			u8 tc_id,
-+			const struct dpni_congestion_notification_cfg *cfg);
-+
-+/**
-  * struct dpni_taildrop - Structure representing the taildrop
-  * @enable:	Indicates whether the taildrop is active or not.
-  * @units:	Indicates the unit of THRESHOLD. Queue taildrop only supports
diff --git a/target/linux/layerscape/patches-5.4/701-net-0202-dpaa2-eth-Keep-congestion-group-taildrop-enabled-whe.patch b/target/linux/layerscape/patches-5.4/701-net-0202-dpaa2-eth-Keep-congestion-group-taildrop-enabled-whe.patch
deleted file mode 100644
index 9a0024636d..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0202-dpaa2-eth-Keep-congestion-group-taildrop-enabled-whe.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From b58fa682dceaee9e2576f9ba3f36942c650414ae Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Tue, 17 Sep 2019 21:14:04 +0300
-Subject: [PATCH] dpaa2-eth: Keep congestion group taildrop enabled when PFC on
-
-Leave congestion group taildrop enabled for all traffic classes
-when PFC is enabled. Notification threshold is low enough such
-that it will be hit first and this also ensures that FQs on
-traffic classes which are not PFC enabled won't drain the buffer
-pool.
-
-FQ taildrop threshold is kept disabled as long as any form of
-flow control is on. Since FQ taildrop works with bytes, not number
-of frames, we can't guarantee it will not interfere with the
-congestion notification mechanism for all frame sizes.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 35 ++++++++++++++++++------
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h |  4 ++-
- 2 files changed, 30 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -1229,17 +1229,21 @@ static void disable_ch_napi(struct dpaa2
- }
- 
- static void dpaa2_eth_set_rx_taildrop(struct dpaa2_eth_priv *priv,
--				      bool tx_pause)
-+				      bool tx_pause, bool pfc)
- {
- 	struct dpni_taildrop td = {0};
- 	struct dpaa2_eth_fq *fq;
- 	int i, err;
- 
-+	/* FQ taildrop: threshold is in bytes, per frame queue. Enabled if
-+	 * flow control is disabled (as it might interfere with either the
-+	 * buffer pool depletion trigger for pause frames or with the group
-+	 * congestion trigger for PFC frames)
-+	 */
- 	td.enable = !tx_pause;
--	if (priv->rx_td_enabled == td.enable)
--		return;
-+	if (priv->rx_fqtd_enabled == td.enable)
-+		goto set_cgtd;
- 
--	/* FQ taildrop: thrshold is in bytes, per frame queue */
- 	td.threshold = DPAA2_ETH_FQ_TAILDROP_THRESH;
- 	td.units = DPNI_CONGESTION_UNIT_BYTES;
- 
-@@ -1257,9 +1261,20 @@ static void dpaa2_eth_set_rx_taildrop(st
- 		}
- 	}
- 
-+	priv->rx_fqtd_enabled = td.enable;
-+
-+set_cgtd:
- 	/* Congestion group taildrop: threshold is in frames, per group
- 	 * of FQs belonging to the same traffic class
-+	 * Enabled if general Tx pause disabled or if PFCs are enabled
-+	 * (congestion group threhsold for PFC generation is lower than the
-+	 * CG taildrop threshold, so it won't interfere with it; we also
-+	 * want frames in non-PFC enabled traffic classes to be kept in check)
- 	 */
-+	td.enable = !tx_pause || (tx_pause && pfc);
-+	if (priv->rx_cgtd_enabled == td.enable)
-+		return;
-+
- 	td.threshold = DPAA2_ETH_CG_TAILDROP_THRESH(priv);
- 	td.units = DPNI_CONGESTION_UNIT_FRAMES;
- 	for (i = 0; i < dpaa2_eth_tc_count(priv); i++) {
-@@ -1273,7 +1288,7 @@ static void dpaa2_eth_set_rx_taildrop(st
- 		}
- 	}
- 
--	priv->rx_td_enabled = td.enable;
-+	priv->rx_cgtd_enabled = td.enable;
- }
- 
- static void update_tx_fqids(struct dpaa2_eth_priv *priv);
-@@ -1296,7 +1311,7 @@ static int link_state_update(struct dpaa
- 	 * only when pause frame generation is disabled.
- 	 */
- 	tx_pause = dpaa2_eth_tx_pause_enabled(state.options);
--	dpaa2_eth_set_rx_taildrop(priv, tx_pause);
-+	dpaa2_eth_set_rx_taildrop(priv, tx_pause, priv->pfc_enabled);
- 
- 	/* Chech link state; speed / duplex changes are not treated yet */
- 	if (priv->link_state.up == state.up)
-@@ -3675,6 +3690,7 @@ static int dpaa2_eth_dcbnl_ieee_setpfc(s
- {
- 	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
- 	struct dpni_link_cfg link_cfg = {0};
-+	bool tx_pause;
- 	int err;
- 
- 	if (pfc->mbc || pfc->delay)
-@@ -3687,8 +3703,8 @@ static int dpaa2_eth_dcbnl_ieee_setpfc(s
- 	/* We allow PFC configuration even if it won't have any effect until
- 	 * general pause frames are enabled
- 	 */
--	if (!dpaa2_eth_rx_pause_enabled(priv->link_state.options) ||
--	    !dpaa2_eth_tx_pause_enabled(priv->link_state.options))
-+	tx_pause = dpaa2_eth_tx_pause_enabled(priv->link_state.options);
-+	if (!dpaa2_eth_rx_pause_enabled(priv->link_state.options) || !tx_pause)
- 		netdev_warn(net_dev, "Pause support must be enabled in order for PFC to work!\n");
- 
- 	link_cfg.rate = priv->link_state.rate;
-@@ -3709,6 +3725,9 @@ static int dpaa2_eth_dcbnl_ieee_setpfc(s
- 		return err;
- 
- 	memcpy(&priv->pfc, pfc, sizeof(priv->pfc));
-+	priv->pfc_enabled = !!pfc->pfc_en;
-+
-+	dpaa2_eth_set_rx_taildrop(priv, tx_pause, priv->pfc_enabled);
- 
- 	return 0;
- }
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -423,7 +423,8 @@ struct dpaa2_eth_priv {
- 	struct dpaa2_eth_drv_stats __percpu *percpu_extras;
- 
- 	u16 mc_token;
--	u8 rx_td_enabled;
-+	u8 rx_fqtd_enabled;
-+	u8 rx_cgtd_enabled;
- 
- 	struct dpni_link_state link_state;
- 	bool do_link_poll;
-@@ -435,6 +436,7 @@ struct dpaa2_eth_priv {
- 	struct dpaa2_eth_cls_rule *cls_rules;
- 	u8 rx_cls_enabled;
- 	u8 vlan_cls_enabled;
-+	u8 pfc_enabled;
- #ifdef CONFIG_FSL_DPAA2_ETH_DCB
- 	u8 dcbx_mode;
- 	struct ieee_pfc pfc;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0203-dpaa2-eth-Add-Tx-shaping-API.patch b/target/linux/layerscape/patches-5.4/701-net-0203-dpaa2-eth-Add-Tx-shaping-API.patch
deleted file mode 100644
index f1bbc5546d..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0203-dpaa2-eth-Add-Tx-shaping-API.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From bec2af878c58bbd12f9009948d4fc58ad9c7c1d3 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Fri, 5 May 2017 18:45:50 +0300
-Subject: [PATCH] dpaa2-eth: Add Tx shaping API
-
-DPNIs can be configured to accept a maximum Tx rate and
-burst size. Add the MC API for controlling these parameters.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h |  8 +++++++
- drivers/net/ethernet/freescale/dpaa2/dpni.c     | 29 +++++++++++++++++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpni.h     | 15 +++++++++++++
- 3 files changed, 52 insertions(+)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-@@ -315,6 +315,14 @@ struct dpni_rsp_get_link_state {
- 	__le64 options;
- };
- 
-+struct dpni_cmd_set_tx_shaping {
-+	/* cmd word 0 */
-+	__le16 max_burst_size;
-+	__le16 pad[3];
-+	/* cmd word 1 */
-+	__le32 rate_limit;
-+};
-+
- struct dpni_cmd_set_max_frame_length {
- 	__le16 max_frame_length;
- };
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.c
-@@ -926,6 +926,35 @@ int dpni_get_link_state(struct fsl_mc_io
- }
- 
- /**
-+ * dpni_set_tx_shaping() - Set the transmit shaping
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPNI object
-+ * @tx_shaper:	Tx shaping configuration
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpni_set_tx_shaping(struct fsl_mc_io *mc_io,
-+			u32 cmd_flags,
-+			u16 token,
-+			const struct dpni_tx_shaping_cfg *tx_shaper)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	struct dpni_cmd_set_tx_shaping *cmd_params;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_TX_SHAPING,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpni_cmd_set_tx_shaping *)cmd.params;
-+	cmd_params->max_burst_size = cpu_to_le16(tx_shaper->max_burst_size);
-+	cmd_params->rate_limit = cpu_to_le32(tx_shaper->rate_limit);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-  * dpni_set_max_frame_length() - Set the maximum received frame length.
-  * @mc_io:	Pointer to MC portal's I/O object
-  * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.h
-@@ -555,6 +555,21 @@ int dpni_get_link_state(struct fsl_mc_io
- 			u16			token,
- 			struct dpni_link_state	*state);
- 
-+/**
-+ * struct dpni_tx_shaping - Structure representing DPNI tx shaping configuration
-+ * @rate_limit: rate in Mbps
-+ * @max_burst_size: burst size in bytes (up to 64KB)
-+ */
-+struct dpni_tx_shaping_cfg {
-+	u32	rate_limit;
-+	u16	max_burst_size;
-+};
-+
-+int dpni_set_tx_shaping(struct fsl_mc_io			*mc_io,
-+			u32					cmd_flags,
-+			u16					token,
-+			const struct dpni_tx_shaping_cfg	*tx_shaper);
-+
- int dpni_set_max_frame_length(struct fsl_mc_io	*mc_io,
- 			      u32		cmd_flags,
- 			      u16		token,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0204-dpaa2-eth-Add-Tx-shaping-support.patch b/target/linux/layerscape/patches-5.4/701-net-0204-dpaa2-eth-Add-Tx-shaping-support.patch
deleted file mode 100644
index 4974362d71..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0204-dpaa2-eth-Add-Tx-shaping-support.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From ef0cc7d01f3eeca37c6bf864903af1c0cf0a792d Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Fri, 5 May 2017 18:11:08 +0300
-Subject: [PATCH] dpaa2-eth: Add Tx shaping support
-
-Add support in sysfs for controlling DPNI Tx shaping
-parameters: rate limit (in Mbps) and max burst size (in bytes).
-The settings are per port.
-
-TODO: See how to integrate Tx shaping support using
-standard Linux tools (ethtool)
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 80 ++++++++++++++++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h |  4 ++
- 2 files changed, 84 insertions(+)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -3778,6 +3778,83 @@ const struct dcbnl_rtnl_ops dpaa2_eth_dc
- };
- #endif
- 
-+/* SysFS support */
-+static ssize_t dpaa2_eth_show_tx_shaping(struct device *dev,
-+					 struct device_attribute *attr,
-+					 char *buf)
-+{
-+	struct dpaa2_eth_priv *priv = netdev_priv(to_net_dev(dev));
-+	/* No MC API for getting the shaping config. We're stateful. */
-+	struct dpni_tx_shaping_cfg *scfg = &priv->shaping_cfg;
-+
-+	return sprintf(buf, "%u %hu\n", scfg->rate_limit, scfg->max_burst_size);
-+}
-+
-+static ssize_t dpaa2_eth_write_tx_shaping(struct device *dev,
-+					  struct device_attribute *attr,
-+					  const char *buf,
-+					  size_t count)
-+{
-+	int err, items;
-+	struct dpaa2_eth_priv *priv = netdev_priv(to_net_dev(dev));
-+	struct dpni_tx_shaping_cfg scfg;
-+
-+	items = sscanf(buf, "%u %hu", &scfg.rate_limit, &scfg.max_burst_size);
-+	if (items != 2) {
-+		pr_err("Expected format: \"rate_limit(Mbps) max_burst_size(bytes)\"\n");
-+		return -EINVAL;
-+	}
-+	/* Size restriction as per MC API documentation */
-+	if (scfg.max_burst_size > DPAA2_ETH_MAX_BURST_SIZE) {
-+		pr_err("max_burst_size must be <= %d\n",
-+		       DPAA2_ETH_MAX_BURST_SIZE);
-+		return -EINVAL;
-+	}
-+
-+	err = dpni_set_tx_shaping(priv->mc_io, 0, priv->mc_token, &scfg);
-+	if (err) {
-+		dev_err(dev, "dpni_set_tx_shaping() failed\n");
-+		return -EPERM;
-+	}
-+	/* If successful, save the current configuration for future inquiries */
-+	priv->shaping_cfg = scfg;
-+
-+	return count;
-+}
-+
-+static struct device_attribute dpaa2_eth_attrs[] = {
-+	__ATTR(tx_shaping,
-+	       0600,
-+	       dpaa2_eth_show_tx_shaping,
-+	       dpaa2_eth_write_tx_shaping),
-+};
-+
-+static void dpaa2_eth_sysfs_init(struct device *dev)
-+{
-+	int i, err;
-+
-+	for (i = 0; i < ARRAY_SIZE(dpaa2_eth_attrs); i++) {
-+		err = device_create_file(dev, &dpaa2_eth_attrs[i]);
-+		if (err) {
-+			dev_err(dev, "ERROR creating sysfs file\n");
-+			goto undo;
-+		}
-+	}
-+	return;
-+
-+undo:
-+	while (i > 0)
-+		device_remove_file(dev, &dpaa2_eth_attrs[--i]);
-+}
-+
-+static void dpaa2_eth_sysfs_remove(struct device *dev)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(dpaa2_eth_attrs); i++)
-+		device_remove_file(dev, &dpaa2_eth_attrs[i]);
-+}
-+
- static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev)
- {
- 	struct device *dev;
-@@ -3897,6 +3974,7 @@ static int dpaa2_eth_probe(struct fsl_mc
- #ifdef CONFIG_DEBUG_FS
- 	dpaa2_dbg_add(priv);
- #endif
-+	dpaa2_eth_sysfs_init(&net_dev->dev);
- 
- 	dev_info(dev, "Probed interface %s\n", net_dev->name);
- 	return 0;
-@@ -3944,6 +4022,8 @@ static int dpaa2_eth_remove(struct fsl_m
- #ifdef CONFIG_DEBUG_FS
- 	dpaa2_dbg_remove(priv);
- #endif
-+	dpaa2_eth_sysfs_remove(&net_dev->dev);
-+
- 	unregister_netdev(net_dev);
- 
- 	if (priv->do_link_poll)
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -42,6 +42,9 @@
-  */
- #define DPAA2_ETH_FQ_TAILDROP_THRESH	(1024 * 1024)
- 
-+/* Maximum burst size value for Tx shaping */
-+#define DPAA2_ETH_MAX_BURST_SIZE	0xF7FF
-+
- /* Maximum number of Tx confirmation frames to be processed
-  * in a single NAPI call
-  */
-@@ -445,6 +448,7 @@ struct dpaa2_eth_priv {
- #ifdef CONFIG_DEBUG_FS
- 	struct dpaa2_debugfs dbg;
- #endif
-+	struct dpni_tx_shaping_cfg shaping_cfg;
- };
- 
- #define DPAA2_RXH_SUPPORTED	(RXH_L2DA | RXH_VLAN | RXH_L3_PROTO \
diff --git a/target/linux/layerscape/patches-5.4/701-net-0205-dpaa2-eth-Add-Rx-error-queue.patch b/target/linux/layerscape/patches-5.4/701-net-0205-dpaa2-eth-Add-Rx-error-queue.patch
deleted file mode 100644
index 5d5d8f5fd5..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0205-dpaa2-eth-Add-Rx-error-queue.patch
+++ /dev/null
@@ -1,202 +0,0 @@
-From 73b0aa73b401810424afa90bf58663a56ad9d51a Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Fri, 5 May 2017 19:07:50 +0300
-Subject: [PATCH] dpaa2-eth: Add Rx error queue
-
-Until now all error frames on the ingress path were discarded
-in hardware. For debug purposes, add an option to have these
-frames delivered to the cpu, on a dedicated queue.
-
-TODO: Remove Kconfig option, find another way to enable
-Rx error queue support
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/Kconfig     | 10 +++
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 97 ++++++++++++++++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h |  5 +-
- 3 files changed, 111 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/Kconfig
-+++ b/drivers/net/ethernet/freescale/dpaa2/Kconfig
-@@ -15,6 +15,16 @@ config FSL_DPAA2_ETH_DCB
- 	depends on DCB
- 	help
- 	  Enable Priority-Based Flow Control (PFC) support in the driver
-+
-+config FSL_DPAA2_ETH_USE_ERR_QUEUE
-+	bool "Enable Rx error queue"
-+	default n
-+	help
-+	  Allow Rx error frames to be enqueued on an error queue
-+	  and processed by the driver (by default they are dropped
-+	  in hardware).
-+	  This may impact performance, recommended for debugging
-+	  purposes only.
- endif
- 
- config FSL_DPAA2_PTP_CLOCK
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -449,6 +449,53 @@ err_frame_format:
- 	percpu_stats->rx_dropped++;
- }
- 
-+#ifdef CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE
-+/* Processing of Rx frames received on the error FQ
-+ * We check and print the error bits and then free the frame
-+ */
-+static void dpaa2_eth_rx_err(struct dpaa2_eth_priv *priv,
-+			     struct dpaa2_eth_channel *ch,
-+			     const struct dpaa2_fd *fd,
-+			     struct dpaa2_eth_fq *fq __always_unused)
-+{
-+	struct device *dev = priv->net_dev->dev.parent;
-+	dma_addr_t addr = dpaa2_fd_get_addr(fd);
-+	void *vaddr;
-+	struct rtnl_link_stats64 *percpu_stats;
-+	struct dpaa2_fas *fas;
-+	u32 status = 0;
-+	u32 fd_errors;
-+	bool has_fas_errors = false;
-+
-+	vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr);
-+	dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUF_SIZE, DMA_BIDIRECTIONAL);
-+
-+	/* check frame errors in the FD field */
-+	fd_errors = dpaa2_fd_get_ctrl(fd) & DPAA2_FD_RX_ERR_MASK;
-+	if (likely(fd_errors)) {
-+		has_fas_errors = (fd_errors & FD_CTRL_FAERR) &&
-+				 !!(dpaa2_fd_get_frc(fd) & DPAA2_FD_FRC_FASV);
-+		if (net_ratelimit())
-+			netdev_dbg(priv->net_dev, "RX frame FD err: %08x\n",
-+				   fd_errors);
-+	}
-+
-+	/* check frame errors in the FAS field */
-+	if (has_fas_errors) {
-+		fas = dpaa2_get_fas(vaddr, false);
-+		status = le32_to_cpu(fas->status);
-+		if (net_ratelimit())
-+			netdev_dbg(priv->net_dev, "Rx frame FAS err: 0x%08x\n",
-+				   status & DPAA2_FAS_RX_ERR_MASK);
-+	}
-+	free_rx_fd(priv, fd, vaddr);
-+
-+	percpu_stats = this_cpu_ptr(priv->percpu_stats);
-+	percpu_stats->rx_errors++;
-+	ch->buf_count--;
-+}
-+#endif
-+
- /* Consume all frames pull-dequeued into the store. This is the simplest way to
-  * make sure we don't accidentally issue another volatile dequeue which would
-  * overwrite (leak) frames already in the store.
-@@ -2351,6 +2398,7 @@ static void set_fq_affinity(struct dpaa2
- 		fq = &priv->fq[i];
- 		switch (fq->type) {
- 		case DPAA2_RX_FQ:
-+		case DPAA2_RX_ERR_FQ:
- 			fq->target_cpu = rx_cpu;
- 			rx_cpu = cpumask_next(rx_cpu, &priv->dpio_cpumask);
- 			if (rx_cpu >= nr_cpu_ids)
-@@ -2394,6 +2442,12 @@ static void setup_fqs(struct dpaa2_eth_p
- 		}
- 	}
- 
-+#ifdef CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE
-+	/* We have exactly one Rx error queue per DPNI */
-+	priv->fq[priv->num_fqs].type = DPAA2_RX_ERR_FQ;
-+	priv->fq[priv->num_fqs++].consume = dpaa2_eth_rx_err;
-+#endif
-+
- 	/* For each FQ, decide on which core to process incoming frames */
- 	set_fq_affinity(priv);
- }
-@@ -2946,6 +3000,40 @@ static int setup_tx_flow(struct dpaa2_et
- 	return 0;
- }
- 
-+#ifdef CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE
-+static int setup_rx_err_flow(struct dpaa2_eth_priv *priv,
-+			     struct dpaa2_eth_fq *fq)
-+{
-+	struct device *dev = priv->net_dev->dev.parent;
-+	struct dpni_queue q = { { 0 } };
-+	struct dpni_queue_id qid;
-+	u8 q_opt = DPNI_QUEUE_OPT_USER_CTX | DPNI_QUEUE_OPT_DEST;
-+	int err;
-+
-+	err = dpni_get_queue(priv->mc_io, 0, priv->mc_token,
-+			     DPNI_QUEUE_RX_ERR, 0, 0, &q, &qid);
-+	if (err) {
-+		dev_err(dev, "dpni_get_queue() failed (%d)\n", err);
-+		return err;
-+	}
-+
-+	fq->fqid = qid.fqid;
-+
-+	q.destination.id = fq->channel->dpcon_id;
-+	q.destination.type = DPNI_DEST_DPCON;
-+	q.destination.priority = 1;
-+	q.user_context = (u64)fq;
-+	err = dpni_set_queue(priv->mc_io, 0, priv->mc_token,
-+			     DPNI_QUEUE_RX_ERR, 0, 0, q_opt, &q);
-+	if (err) {
-+		dev_err(dev, "dpni_set_queue() failed (%d)\n", err);
-+		return err;
-+	}
-+
-+	return 0;
-+}
-+#endif
-+
- /* Supported header fields for Rx hash distribution key */
- static const struct dpaa2_eth_dist_fields dist_fields[] = {
- 	{
-@@ -3315,7 +3403,11 @@ static int bind_dpni(struct dpaa2_eth_pr
- 	/* Configure handling of error frames */
- 	err_cfg.errors = DPAA2_FAS_RX_ERR_MASK;
- 	err_cfg.set_frame_annotation = 1;
-+#ifdef CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE
-+	err_cfg.error_action = DPNI_ERROR_ACTION_SEND_TO_ERROR_QUEUE;
-+#else
- 	err_cfg.error_action = DPNI_ERROR_ACTION_DISCARD;
-+#endif
- 	err = dpni_set_errors_behavior(priv->mc_io, 0, priv->mc_token,
- 				       &err_cfg);
- 	if (err) {
-@@ -3332,6 +3424,11 @@ static int bind_dpni(struct dpaa2_eth_pr
- 		case DPAA2_TX_CONF_FQ:
- 			err = setup_tx_flow(priv, &priv->fq[i]);
- 			break;
-+#ifdef CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE
-+		case DPAA2_RX_ERR_FQ:
-+			err = setup_rx_err_flow(priv, &priv->fq[i]);
-+			break;
-+#endif
- 		default:
- 			dev_err(dev, "Invalid FQ type %d\n", priv->fq[i].type);
- 			return -EINVAL;
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -318,8 +318,10 @@ struct dpaa2_eth_ch_stats {
- #define DPAA2_ETH_MAX_RX_QUEUES		\
- 	(DPAA2_ETH_MAX_RX_QUEUES_PER_TC * DPAA2_ETH_MAX_TCS)
- #define DPAA2_ETH_MAX_TX_QUEUES		16
-+#define DPAA2_ETH_MAX_RX_ERR_QUEUES	1
- #define DPAA2_ETH_MAX_QUEUES		(DPAA2_ETH_MAX_RX_QUEUES + \
--					DPAA2_ETH_MAX_TX_QUEUES)
-+					DPAA2_ETH_MAX_TX_QUEUES + \
-+					DPAA2_ETH_MAX_RX_ERR_QUEUES)
- #define DPAA2_ETH_MAX_NETDEV_QUEUES	\
- 	(DPAA2_ETH_MAX_TX_QUEUES * DPAA2_ETH_MAX_TCS)
- 
-@@ -328,6 +330,7 @@ struct dpaa2_eth_ch_stats {
- enum dpaa2_eth_fq_type {
- 	DPAA2_RX_FQ = 0,
- 	DPAA2_TX_CONF_FQ,
-+	DPAA2_RX_ERR_FQ
- };
- 
- struct dpaa2_eth_priv;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0206-dpaa2-eth-Add-API-for-counters-reset.patch b/target/linux/layerscape/patches-5.4/701-net-0206-dpaa2-eth-Add-API-for-counters-reset.patch
deleted file mode 100644
index 30f9208616..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0206-dpaa2-eth-Add-API-for-counters-reset.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 991c03df1b0543ed02a5d4e803ac8fa9d993fb8e Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Tue, 9 May 2017 16:36:39 +0300
-Subject: [PATCH] dpaa2-eth: Add API for counters reset
-
-Add DPNI object API function for resetting interface
-hardware counters.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h |  1 +
- drivers/net/ethernet/freescale/dpaa2/dpni.c     | 23 +++++++++++++++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpni.h     |  4 ++++
- 3 files changed, 28 insertions(+)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-@@ -68,6 +68,7 @@
- #define DPNI_CMDID_CLR_FS_ENT				DPNI_CMD(0x246)
- 
- #define DPNI_CMDID_GET_STATISTICS			DPNI_CMD(0x25D)
-+#define DPNI_CMDID_RESET_STATISTICS			DPNI_CMD(0x25E)
- #define DPNI_CMDID_GET_QUEUE				DPNI_CMD(0x25F)
- #define DPNI_CMDID_SET_QUEUE				DPNI_CMD(0x260)
- #define DPNI_CMDID_GET_TAILDROP				DPNI_CMD(0x261)
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.c
-@@ -1582,6 +1582,29 @@ int dpni_get_statistics(struct fsl_mc_io
- }
- 
- /**
-+ * dpni_reset_statistics() - Clears DPNI statistics
-+ * @mc_io:		Pointer to MC portal's I/O object
-+ * @cmd_flags:		Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:		Token of DPNI object
-+ *
-+ * Return:  '0' on Success; Error code otherwise.
-+ */
-+int dpni_reset_statistics(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPNI_CMDID_RESET_STATISTICS,
-+					  cmd_flags,
-+					  token);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-  * dpni_set_taildrop() - Set taildrop per queue or TC
-  * @mc_io:	Pointer to MC portal's I/O object
-  * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.h
-@@ -496,6 +496,10 @@ int dpni_get_statistics(struct fsl_mc_io
- 			u8			page,
- 			union dpni_statistics	*stat);
- 
-+int dpni_reset_statistics(struct fsl_mc_io *mc_io,
-+			  u32 cmd_flags,
-+			  u16 token);
-+
- /**
-  * Enable auto-negotiation
-  */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0207-dpaa2-eth-Add-reset-controls-for-debugfs-stats.patch b/target/linux/layerscape/patches-5.4/701-net-0207-dpaa2-eth-Add-reset-controls-for-debugfs-stats.patch
deleted file mode 100644
index 01d7b01c28..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0207-dpaa2-eth-Add-reset-controls-for-debugfs-stats.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From aa80ddbb30e9ffd75e2dcaa58abf6383a5520942 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Wed, 13 Feb 2019 12:23:41 +0200
-Subject: [PATCH] dpaa2-eth: Add reset controls for debugfs stats
-
-Allow the user to reset statistics counters through debugfs entries.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- .../ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c   | 64 ++++++++++++++++++++++
- 1 file changed, 64 insertions(+)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c
-@@ -167,6 +167,62 @@ static const struct file_operations dpaa
- 	.release = single_release,
- };
- 
-+static ssize_t dpaa2_dbg_reset_write(struct file *file, const char __user *buf,
-+				     size_t count, loff_t *offset)
-+{
-+	struct dpaa2_eth_priv *priv = file->private_data;
-+	struct rtnl_link_stats64 *percpu_stats;
-+	struct dpaa2_eth_drv_stats *percpu_extras;
-+	struct dpaa2_eth_fq *fq;
-+	struct dpaa2_eth_channel *ch;
-+	int i;
-+
-+	for_each_online_cpu(i) {
-+		percpu_stats = per_cpu_ptr(priv->percpu_stats, i);
-+		memset(percpu_stats, 0, sizeof(*percpu_stats));
-+
-+		percpu_extras = per_cpu_ptr(priv->percpu_extras, i);
-+		memset(percpu_extras, 0, sizeof(*percpu_extras));
-+	}
-+
-+	for (i = 0; i < priv->num_fqs; i++) {
-+		fq = &priv->fq[i];
-+		memset(&fq->stats, 0, sizeof(fq->stats));
-+	}
-+
-+	for (i = 0; i < priv->num_channels; i++) {
-+		ch = priv->channel[i];
-+		memset(&ch->stats, 0, sizeof(ch->stats));
-+	}
-+
-+	return count;
-+}
-+
-+static const struct file_operations dpaa2_dbg_reset_ops = {
-+	.open = simple_open,
-+	.write = dpaa2_dbg_reset_write,
-+};
-+
-+static ssize_t dpaa2_dbg_reset_mc_write(struct file *file,
-+					const char __user *buf,
-+					size_t count, loff_t *offset)
-+{
-+	struct dpaa2_eth_priv *priv = file->private_data;
-+	int err;
-+
-+	err = dpni_reset_statistics(priv->mc_io, 0, priv->mc_token);
-+	if (err)
-+		netdev_err(priv->net_dev,
-+			   "dpni_reset_statistics() failed %d\n", err);
-+
-+	return count;
-+}
-+
-+static const struct file_operations dpaa2_dbg_reset_mc_ops = {
-+	.open = simple_open,
-+	.write = dpaa2_dbg_reset_mc_write,
-+};
-+
- void dpaa2_dbg_add(struct dpaa2_eth_priv *priv)
- {
- 	struct dentry *dir;
-@@ -183,6 +239,14 @@ void dpaa2_dbg_add(struct dpaa2_eth_priv
- 
- 	/* per-fq stats file */
- 	debugfs_create_file("ch_stats", 0444, dir, priv, &dpaa2_dbg_ch_ops);
-+
-+	/* reset stats */
-+	debugfs_create_file("reset_stats", 0200, dir, priv,
-+			    &dpaa2_dbg_reset_ops);
-+
-+	/* reset MC stats */
-+	debugfs_create_file("reset_mc_stats", 0222, dir, priv,
-+			    &dpaa2_dbg_reset_mc_ops);
- }
- 
- void dpaa2_dbg_remove(struct dpaa2_eth_priv *priv)
diff --git a/target/linux/layerscape/patches-5.4/701-net-0208-dpaa2-eth-Add-channel-stat.patch b/target/linux/layerscape/patches-5.4/701-net-0208-dpaa2-eth-Add-channel-stat.patch
deleted file mode 100644
index 074078ec06..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0208-dpaa2-eth-Add-channel-stat.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 5a43b0405561fb6feffb7042493b58014ac27a4d Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Tue, 12 Feb 2019 22:05:16 +0200
-Subject: [PATCH] dpaa2-eth: Add channel stat
-
-Compute average number of frames processed for each CDAN
-received on a channel and print it in the detailed channel
-stats.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c | 8 +++++---
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c         | 1 +
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h         | 2 ++
- drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c     | 2 +-
- 4 files changed, 9 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c
-@@ -132,16 +132,18 @@ static int dpaa2_dbg_ch_show(struct seq_
- 	int i;
- 
- 	seq_printf(file, "Channel stats for %s:\n", priv->net_dev->name);
--	seq_printf(file, "%s%16s%16s%16s%16s\n",
--		   "CHID", "CPU", "Deq busy", "CDANs", "Buf count");
-+	seq_printf(file, "%s%16s%16s%16s%16s%16s%16s\n",
-+		   "CHID", "CPU", "Deq busy", "Frames", "CDANs", "Avg Frm/CDAN", "Buf count");
- 
- 	for (i = 0; i < priv->num_channels; i++) {
- 		ch = priv->channel[i];
--		seq_printf(file, "%4d%16d%16llu%16llu%16d\n",
-+		seq_printf(file, "%4d%16d%16llu%16llu%16llu%16llu%16d\n",
- 			   ch->ch_id,
- 			   ch->nctx.desired_cpu,
- 			   ch->stats.dequeue_portal_busy,
-+			   ch->stats.frames,
- 			   ch->stats.cdan,
-+			   ch->stats.frames / ch->stats.cdan,
- 			   ch->buf_count);
- 	}
- 
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -540,6 +540,7 @@ static int consume_frames(struct dpaa2_e
- 		return 0;
- 
- 	fq->stats.frames += cleaned;
-+	ch->stats.frames += cleaned;
- 
- 	/* A dequeue operation only pulls frames from a single queue
- 	 * into the store. Return the frame queue as an out param.
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -310,6 +310,8 @@ struct dpaa2_eth_ch_stats {
- 	__u64 xdp_tx;
- 	__u64 xdp_tx_err;
- 	__u64 xdp_redirect;
-+	/* Must be last, does not show up in ethtool stats */
-+	__u64 frames;
- };
- 
- /* Maximum number of queues associated with a DPNI */
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-@@ -234,7 +234,7 @@ static void dpaa2_eth_get_ethtool_stats(
- 	/* Per-channel stats */
- 	for (k = 0; k < priv->num_channels; k++) {
- 		ch_stats = &priv->channel[k]->stats;
--		for (j = 0; j < sizeof(*ch_stats) / sizeof(__u64); j++)
-+		for (j = 0; j < sizeof(*ch_stats) / sizeof(__u64) - 1; j++)
- 			*((__u64 *)data + i + j) += *((__u64 *)ch_stats + j);
- 	}
- 	i += j;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0209-dpaa2-eth-Update-dpni_set_tx_shaping-cmd-to-v2.patch b/target/linux/layerscape/patches-5.4/701-net-0209-dpaa2-eth-Update-dpni_set_tx_shaping-cmd-to-v2.patch
deleted file mode 100644
index bb80578cdd..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0209-dpaa2-eth-Update-dpni_set_tx_shaping-cmd-to-v2.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-From 81efe5fd6fac6db454ccccb1e6c280419d0885c4 Mon Sep 17 00:00:00 2001
-From: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-Date: Mon, 13 Nov 2017 17:29:21 +0200
-Subject: [PATCH] dpaa2-eth: Update dpni_set_tx_shaping cmd to v2
-
-Support dual rate shaping (committed, excess) and the coupled parameter.
-
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c |  5 +++--
- drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h  | 18 ++++++++++++++----
- drivers/net/ethernet/freescale/dpaa2/dpni.c      | 23 ++++++++++++++++-------
- drivers/net/ethernet/freescale/dpaa2/dpni.h      | 10 ++++++----
- 4 files changed, 39 insertions(+), 17 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -3895,7 +3895,7 @@ static ssize_t dpaa2_eth_write_tx_shapin
- {
- 	int err, items;
- 	struct dpaa2_eth_priv *priv = netdev_priv(to_net_dev(dev));
--	struct dpni_tx_shaping_cfg scfg;
-+	struct dpni_tx_shaping_cfg scfg, ercfg = {0};
- 
- 	items = sscanf(buf, "%u %hu", &scfg.rate_limit, &scfg.max_burst_size);
- 	if (items != 2) {
-@@ -3909,7 +3909,8 @@ static ssize_t dpaa2_eth_write_tx_shapin
- 		return -EINVAL;
- 	}
- 
--	err = dpni_set_tx_shaping(priv->mc_io, 0, priv->mc_token, &scfg);
-+	err = dpni_set_tx_shaping(priv->mc_io, 0, priv->mc_token, &scfg,
-+				  &ercfg, 0);
- 	if (err) {
- 		dev_err(dev, "dpni_set_tx_shaping() failed\n");
- 		return -EPERM;
---- a/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-@@ -11,9 +11,11 @@
- #define DPNI_VER_MAJOR				7
- #define DPNI_VER_MINOR				0
- #define DPNI_CMD_BASE_VERSION			1
-+#define DPNI_CMD_2ND_VERSION			2
- #define DPNI_CMD_ID_OFFSET			4
- 
- #define DPNI_CMD(id)	(((id) << DPNI_CMD_ID_OFFSET) | DPNI_CMD_BASE_VERSION)
-+#define DPNI_CMD_V2(id)	(((id) << DPNI_CMD_ID_OFFSET) | DPNI_CMD_2ND_VERSION)
- 
- #define DPNI_CMDID_OPEN					DPNI_CMD(0x801)
- #define DPNI_CMDID_CLOSE				DPNI_CMD(0x800)
-@@ -45,7 +47,7 @@
- #define DPNI_CMDID_SET_MAX_FRAME_LENGTH			DPNI_CMD(0x216)
- #define DPNI_CMDID_GET_MAX_FRAME_LENGTH			DPNI_CMD(0x217)
- #define DPNI_CMDID_SET_LINK_CFG				DPNI_CMD(0x21A)
--#define DPNI_CMDID_SET_TX_SHAPING			DPNI_CMD(0x21B)
-+#define DPNI_CMDID_SET_TX_SHAPING			DPNI_CMD_V2(0x21B)
- 
- #define DPNI_CMDID_SET_MCAST_PROMISC			DPNI_CMD(0x220)
- #define DPNI_CMDID_GET_MCAST_PROMISC			DPNI_CMD(0x221)
-@@ -316,12 +318,20 @@ struct dpni_rsp_get_link_state {
- 	__le64 options;
- };
- 
-+#define DPNI_COUPLED_SHIFT	0
-+#define DPNI_COUPLED_SIZE	1
-+
- struct dpni_cmd_set_tx_shaping {
- 	/* cmd word 0 */
--	__le16 max_burst_size;
--	__le16 pad[3];
-+	__le16 tx_cr_max_burst_size;
-+	__le16 tx_er_max_burst_size;
-+	__le32 pad;
- 	/* cmd word 1 */
--	__le32 rate_limit;
-+	__le32 tx_cr_rate_limit;
-+	__le32 tx_er_rate_limit;
-+	/* cmd word 2 */
-+	/* from LSB: coupled:1 */
-+	u8 coupled;
- };
- 
- struct dpni_cmd_set_max_frame_length {
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.c
-@@ -927,17 +927,21 @@ int dpni_get_link_state(struct fsl_mc_io
- 
- /**
-  * dpni_set_tx_shaping() - Set the transmit shaping
-- * @mc_io:	Pointer to MC portal's I/O object
-- * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-- * @token:	Token of DPNI object
-- * @tx_shaper:	Tx shaping configuration
-+ * @mc_io:		Pointer to MC portal's I/O object
-+ * @cmd_flags:		Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:		Token of DPNI object
-+ * @tx_cr_shaper:	TX committed rate shaping configuration
-+ * @tx_er_shaper:	TX excess rate shaping configuration
-+ * @coupled:		Committed and excess rate shapers are coupled
-  *
-  * Return:	'0' on Success; Error code otherwise.
-  */
- int dpni_set_tx_shaping(struct fsl_mc_io *mc_io,
- 			u32 cmd_flags,
- 			u16 token,
--			const struct dpni_tx_shaping_cfg *tx_shaper)
-+			const struct dpni_tx_shaping_cfg *tx_cr_shaper,
-+			const struct dpni_tx_shaping_cfg *tx_er_shaper,
-+			int coupled)
- {
- 	struct fsl_mc_command cmd = { 0 };
- 	struct dpni_cmd_set_tx_shaping *cmd_params;
-@@ -947,8 +951,13 @@ int dpni_set_tx_shaping(struct fsl_mc_io
- 					  cmd_flags,
- 					  token);
- 	cmd_params = (struct dpni_cmd_set_tx_shaping *)cmd.params;
--	cmd_params->max_burst_size = cpu_to_le16(tx_shaper->max_burst_size);
--	cmd_params->rate_limit = cpu_to_le32(tx_shaper->rate_limit);
-+	cmd_params->tx_cr_max_burst_size =
-+				cpu_to_le16(tx_cr_shaper->max_burst_size);
-+	cmd_params->tx_er_max_burst_size =
-+				cpu_to_le16(tx_er_shaper->max_burst_size);
-+	cmd_params->tx_cr_rate_limit = cpu_to_le32(tx_cr_shaper->rate_limit);
-+	cmd_params->tx_er_rate_limit = cpu_to_le32(tx_er_shaper->rate_limit);
-+	dpni_set_field(cmd_params->coupled, COUPLED, coupled);
- 
- 	/* send command to mc*/
- 	return mc_send_command(mc_io, &cmd);
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.h
-@@ -569,10 +569,12 @@ struct dpni_tx_shaping_cfg {
- 	u16	max_burst_size;
- };
- 
--int dpni_set_tx_shaping(struct fsl_mc_io			*mc_io,
--			u32					cmd_flags,
--			u16					token,
--			const struct dpni_tx_shaping_cfg	*tx_shaper);
-+int dpni_set_tx_shaping(struct fsl_mc_io *mc_io,
-+			u32 cmd_flags,
-+			u16 token,
-+			const struct dpni_tx_shaping_cfg *tx_cr_shaper,
-+			const struct dpni_tx_shaping_cfg *tx_er_shaper,
-+			int coupled);
- 
- int dpni_set_max_frame_length(struct fsl_mc_io	*mc_io,
- 			      u32		cmd_flags,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0210-dpaa2-eth-Add-dpni_set_tx_priorities-API.patch b/target/linux/layerscape/patches-5.4/701-net-0210-dpaa2-eth-Add-dpni_set_tx_priorities-API.patch
deleted file mode 100644
index 4ce16b6fd9..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0210-dpaa2-eth-Add-dpni_set_tx_priorities-API.patch
+++ /dev/null
@@ -1,158 +0,0 @@
-From 97308e74e2ae781d37437137686965395b94327b Mon Sep 17 00:00:00 2001
-From: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-Date: Mon, 16 Oct 2017 15:27:55 +0000
-Subject: [PATCH] dpaa2-eth: Add dpni_set_tx_priorities API
-
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h | 19 ++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpni.c     | 49 +++++++++++++++++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpni.h     | 44 ++++++++++++++++++++++
- 3 files changed, 112 insertions(+)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-@@ -69,6 +69,7 @@
- #define DPNI_CMDID_REMOVE_FS_ENT			DPNI_CMD(0x245)
- #define DPNI_CMDID_CLR_FS_ENT				DPNI_CMD(0x246)
- 
-+#define DPNI_CMDID_SET_TX_PRIORITIES			DPNI_CMD_V2(0x250)
- #define DPNI_CMDID_GET_STATISTICS			DPNI_CMD(0x25D)
- #define DPNI_CMDID_RESET_STATISTICS			DPNI_CMD(0x25E)
- #define DPNI_CMDID_GET_QUEUE				DPNI_CMD(0x25F)
-@@ -393,6 +394,24 @@ struct dpni_cmd_clear_mac_filters {
- 	u8 flags;
- };
- 
-+#define DPNI_SEPARATE_GRP_SHIFT 0
-+#define DPNI_SEPARATE_GRP_SIZE  1
-+#define DPNI_MODE_1_SHIFT		0
-+#define DPNI_MODE_1_SIZE		4
-+#define DPNI_MODE_2_SHIFT		4
-+#define DPNI_MODE_2_SIZE		4
-+
-+struct dpni_cmd_set_tx_priorities {
-+	__le16 flags;
-+	u8 prio_group_A;
-+	u8 prio_group_B;
-+	__le32 pad0;
-+	u8 modes[4];
-+	__le32 pad1;
-+	__le64 pad2;
-+	__le16 delta_bandwidth[8];
-+};
-+
- #define DPNI_DIST_MODE_SHIFT		0
- #define DPNI_DIST_MODE_SIZE		4
- #define DPNI_MISS_ACTION_SHIFT		4
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.c
-@@ -1355,6 +1355,55 @@ int dpni_clear_mac_filters(struct fsl_mc
- }
- 
- /**
-+ * dpni_set_tx_priorities() - Set transmission TC priority configuration
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPNI object
-+ * @cfg:	Transmission selection configuration
-+ *
-+ * warning:	Allowed only when DPNI is disabled
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpni_set_tx_priorities(struct fsl_mc_io *mc_io,
-+			   u32 cmd_flags,
-+			   u16 token,
-+			   const struct dpni_tx_priorities_cfg *cfg)
-+{
-+	struct dpni_cmd_set_tx_priorities *cmd_params;
-+	struct fsl_mc_command cmd = { 0 };
-+	int i;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_TX_PRIORITIES,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpni_cmd_set_tx_priorities *)cmd.params;
-+	dpni_set_field(cmd_params->flags,
-+		       SEPARATE_GRP,
-+		       cfg->separate_groups);
-+	cmd_params->prio_group_A = cfg->prio_group_A;
-+	cmd_params->prio_group_B = cfg->prio_group_B;
-+
-+	for (i = 0; i + 1 < DPNI_MAX_TC; i += 2) {
-+		dpni_set_field(cmd_params->modes[i / 2],
-+			       MODE_1,
-+			       cfg->tc_sched[i].mode);
-+		dpni_set_field(cmd_params->modes[i / 2],
-+			       MODE_2,
-+			       cfg->tc_sched[i + 1].mode);
-+	}
-+
-+	for (i = 0; i < DPNI_MAX_TC; i++) {
-+		cmd_params->delta_bandwidth[i] =
-+				cpu_to_le16(cfg->tc_sched[i].delta_bandwidth);
-+	}
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-  * dpni_set_rx_tc_dist() - Set Rx traffic class distribution configuration
-  * @mc_io:	Pointer to MC portal's I/O object
-  * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.h
-@@ -677,6 +677,50 @@ int dpni_prepare_key_cfg(const struct dp
- 			 u8 *key_cfg_buf);
- 
- /**
-+ * enum dpni_tx_schedule_mode - DPNI Tx scheduling mode
-+ * @DPNI_TX_SCHED_STRICT_PRIORITY: strict priority
-+ * @DPNI_TX_SCHED_WEIGHTED_A: weighted based scheduling in group A
-+ * @DPNI_TX_SCHED_WEIGHTED_B: weighted based scheduling in group B
-+ */
-+enum dpni_tx_schedule_mode {
-+	DPNI_TX_SCHED_STRICT_PRIORITY = 0,
-+	DPNI_TX_SCHED_WEIGHTED_A,
-+	DPNI_TX_SCHED_WEIGHTED_B,
-+};
-+
-+/**
-+ * struct dpni_tx_schedule_cfg - Structure representing Tx scheduling conf
-+ * @mode:		Scheduling mode
-+ * @delta_bandwidth:	Bandwidth represented in weights from 100 to 10000;
-+ *	not applicable for 'strict-priority' mode;
-+ */
-+struct dpni_tx_schedule_cfg {
-+	enum dpni_tx_schedule_mode mode;
-+	u16 delta_bandwidth;
-+};
-+
-+/**
-+ * struct dpni_tx_priorities_cfg - Structure representing transmission
-+ *					priorities for DPNI TCs
-+ * @tc_sched:	An array of traffic-classes
-+ * @prio_group_A: Priority of group A
-+ * @prio_group_B: Priority of group B
-+ * @separate_groups: Treat A and B groups as separate
-+ * @ceetm_ch_idx: ceetm channel index to apply the changes
-+ */
-+struct dpni_tx_priorities_cfg {
-+	struct dpni_tx_schedule_cfg tc_sched[DPNI_MAX_TC];
-+	u8 prio_group_A;
-+	u8 prio_group_B;
-+	u8 separate_groups;
-+};
-+
-+int dpni_set_tx_priorities(struct fsl_mc_io *mc_io,
-+			   u32 cmd_flags,
-+			   u16 token,
-+			   const struct dpni_tx_priorities_cfg *cfg);
-+
-+/**
-  * struct dpni_rx_tc_dist_cfg - Rx traffic class distribution configuration
-  * @dist_size: Set the distribution size;
-  *	supported values: 1,2,3,4,6,7,8,12,14,16,24,28,32,48,56,64,96,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0211-dpaa2-eth-Update-dpni_get_statistics.patch b/target/linux/layerscape/patches-5.4/701-net-0211-dpaa2-eth-Update-dpni_get_statistics.patch
deleted file mode 100644
index f04674affb..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0211-dpaa2-eth-Update-dpni_get_statistics.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From fa4e59c0fe5e6e2fd8ba29cdcaa03988b3d301c6 Mon Sep 17 00:00:00 2001
-From: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-Date: Mon, 23 Oct 2017 08:31:25 +0000
-Subject: [PATCH] dpaa2-eth: Update dpni_get_statistics
-
-Statistics struct now contains an addditional page, with CEETM stats.
-Also update the cmd version, and the call where it's used.
-
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c     | 2 +-
- drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 2 +-
- drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h      | 3 ++-
- drivers/net/ethernet/freescale/dpaa2/dpni.c          | 4 ++++
- drivers/net/ethernet/freescale/dpaa2/dpni.h          | 1 +
- 5 files changed, 9 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -1479,7 +1479,7 @@ static void wait_for_egress_fq_empty(str
- 		goto out;
- 
- 	do {
--		err = dpni_get_statistics(priv->mc_io, 0, priv->mc_token, 6,
-+		err = dpni_get_statistics(priv->mc_io, 0, priv->mc_token, 6, 0,
- 					  &stats);
- 		if (err)
- 			goto out;
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-@@ -211,7 +211,7 @@ static void dpaa2_eth_get_ethtool_stats(
- 		if (j == 4 || j == 5)
- 			continue;
- 		err = dpni_get_statistics(priv->mc_io, 0, priv->mc_token,
--					  j, &dpni_stats);
-+					  j, 0, &dpni_stats);
- 		if (err == -EINVAL)
- 			/* Older firmware versions don't support all pages */
- 			memset(&dpni_stats, 0, sizeof(dpni_stats));
---- a/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-@@ -70,7 +70,7 @@
- #define DPNI_CMDID_CLR_FS_ENT				DPNI_CMD(0x246)
- 
- #define DPNI_CMDID_SET_TX_PRIORITIES			DPNI_CMD_V2(0x250)
--#define DPNI_CMDID_GET_STATISTICS			DPNI_CMD(0x25D)
-+#define DPNI_CMDID_GET_STATISTICS			DPNI_CMD_V2(0x25D)
- #define DPNI_CMDID_RESET_STATISTICS			DPNI_CMD(0x25E)
- #define DPNI_CMDID_GET_QUEUE				DPNI_CMD(0x25F)
- #define DPNI_CMDID_SET_QUEUE				DPNI_CMD(0x260)
-@@ -287,6 +287,7 @@ struct dpni_rsp_get_tx_data_offset {
- 
- struct dpni_cmd_get_statistics {
- 	u8 page_number;
-+	u8 param;
- };
- 
- struct dpni_rsp_get_statistics {
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.c
-@@ -1604,6 +1604,8 @@ int dpni_get_queue(struct fsl_mc_io *mc_
-  * @token:	Token of DPNI object
-  * @page:	Selects the statistics page to retrieve, see
-  *		DPNI_GET_STATISTICS output. Pages are numbered 0 to 6.
-+ * @param:	Custom parameter for some pages used to select a certain
-+ *		statistic source, for example the TC.
-  * @stat:	Structure containing the statistics
-  *
-  * Return:	'0' on Success; Error code otherwise.
-@@ -1612,6 +1614,7 @@ int dpni_get_statistics(struct fsl_mc_io
- 			u32 cmd_flags,
- 			u16 token,
- 			u8 page,
-+			u8 param,
- 			union dpni_statistics *stat)
- {
- 	struct fsl_mc_command cmd = { 0 };
-@@ -1625,6 +1628,7 @@ int dpni_get_statistics(struct fsl_mc_io
- 					  token);
- 	cmd_params = (struct dpni_cmd_get_statistics *)cmd.params;
- 	cmd_params->page_number = page;
-+	cmd_params->param = param;
- 
- 	/* send command to mc */
- 	err = mc_send_command(mc_io, &cmd);
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.h
-@@ -494,6 +494,7 @@ int dpni_get_statistics(struct fsl_mc_io
- 			u32			cmd_flags,
- 			u16			token,
- 			u8			page,
-+			u8			param,
- 			union dpni_statistics	*stat);
- 
- int dpni_reset_statistics(struct fsl_mc_io *mc_io,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0212-dpaa2-eth-Add-API-for-ceetm_id-tc-in-set-congestion.patch b/target/linux/layerscape/patches-5.4/701-net-0212-dpaa2-eth-Add-API-for-ceetm_id-tc-in-set-congestion.patch
deleted file mode 100644
index 719f4c06b2..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0212-dpaa2-eth-Add-API-for-ceetm_id-tc-in-set-congestion.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 551cd6add98fb3bde24ee8e4ffa76aec9fd9d40c Mon Sep 17 00:00:00 2001
-From: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-Date: Mon, 2 Oct 2017 14:45:56 +0000
-Subject: [PATCH] dpaa2-eth: Add API for ceetm_id + tc in set congestion
-
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpni.c | 15 ++++++++++++---
- drivers/net/ethernet/freescale/dpaa2/dpni.h |  6 ++++++
- 2 files changed, 18 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.c
-@@ -1448,7 +1448,10 @@ int dpni_set_rx_tc_dist(struct fsl_mc_io
-  * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-  * @token:	Token of DPNI object
-  * @qtype:	Type of queue - Rx, Tx and Tx confirm types are supported
-- * @tc_id:	Traffic class selection (0-7)
-+ * @tc_id:	bits 7-4 contain ceetm channel index (valid only for TX);
-+ *		bits 3-0 contain traffic class.
-+ *		Use macro DPNI_BUILD_CH_TC() to build correct value for
-+ *		tc_id parameter
-  * @cfg:	Congestion notification configuration
-  *
-  * Return:	'0' on Success; error code otherwise.
-@@ -1674,7 +1677,10 @@ int dpni_reset_statistics(struct fsl_mc_
-  * @cg_point:	Congestion point
-  * @q_type:	Queue type on which the taildrop is configured.
-  *		Only Rx queues are supported for now
-- * @tc:		Traffic class to apply this taildrop to
-+ * @tc:		bits 7-4 contain ceetm channel index (valid only for TX);
-+ *		bits 3-0 contain traffic class.
-+ *		Use macro DPNI_BUILD_CH_TC() to build correct value for
-+ *		tc parameter.
-  * @q_index:	Index of the queue if the DPNI supports multiple queues for
-  *		traffic distribution. Ignored if CONGESTION_POINT is not 0.
-  * @taildrop:	Taildrop structure
-@@ -1718,7 +1724,10 @@ int dpni_set_taildrop(struct fsl_mc_io *
-  * @cg_point:	Congestion point
-  * @q_type:	Queue type on which the taildrop is configured.
-  *		Only Rx queues are supported for now
-- * @tc:		Traffic class to apply this taildrop to
-+ * @tc:		bits 7-4 contain ceetm channel index (valid only for TX);
-+ *		bits 3-0 contain traffic class.
-+ *		Use macro DPNI_BUILD_CH_TC() to build correct value for
-+ *		tc parameter.
-  * @q_index:	Index of the queue if the DPNI supports multiple queues for
-  *		traffic distribution. Ignored if CONGESTION_POINT is not 0.
-  * @taildrop:	Taildrop structure
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.h
-@@ -996,6 +996,12 @@ struct dpni_congestion_notification_cfg
- 	u16 notification_mode;
- };
- 
-+/** Compose TC parameter for function dpni_set_congestion_notification()
-+ * and dpni_get_congestion_notification().
-+ */
-+#define DPNI_BUILD_CH_TC(ceetm_ch_idx, tc) \
-+	((((ceetm_ch_idx) & 0x0F) << 4) | ((tc) & 0x0F))
-+
- int dpni_set_congestion_notification(
- 			struct fsl_mc_io *mc_io,
- 			u32 cmd_flags,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0213-dpaa2-eth-Add-CEETM-qdisc-support.patch b/target/linux/layerscape/patches-5.4/701-net-0213-dpaa2-eth-Add-CEETM-qdisc-support.patch
deleted file mode 100644
index ca06007dfe..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0213-dpaa2-eth-Add-CEETM-qdisc-support.patch
+++ /dev/null
@@ -1,1619 +0,0 @@
-From 68622c8bb029f9fd4c83ffa3bd979fa62a3599d0 Mon Sep 17 00:00:00 2001
-From: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-Date: Mon, 13 Nov 2017 17:26:13 +0200
-Subject: [PATCH] dpaa2-eth: Add CEETM qdisc support
-
-Features include:
-- dual rate shaping support
-- per-channel shaping and classification
-- strict / weighted scheduling among num_tc classes
-- TD enabled for configured class queues
-- prio class (leaf) firmware statistics support
-- weights normalized based on max
-- tc filters based classification
-
-Only 1 CEETM ch supported, only channel shaping supported.
-
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/Kconfig       |    7 +
- drivers/net/ethernet/freescale/dpaa2/Makefile      |    1 +
- .../net/ethernet/freescale/dpaa2/dpaa2-eth-ceetm.c | 1219 ++++++++++++++++++++
- .../net/ethernet/freescale/dpaa2/dpaa2-eth-ceetm.h |  207 ++++
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c   |   53 +-
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h   |    7 +
- 6 files changed, 1482 insertions(+), 12 deletions(-)
- create mode 100644 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-ceetm.c
- create mode 100644 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-ceetm.h
-
---- a/drivers/net/ethernet/freescale/dpaa2/Kconfig
-+++ b/drivers/net/ethernet/freescale/dpaa2/Kconfig
-@@ -25,6 +25,13 @@ config FSL_DPAA2_ETH_USE_ERR_QUEUE
- 	  in hardware).
- 	  This may impact performance, recommended for debugging
- 	  purposes only.
-+
-+config FSL_DPAA2_ETH_CEETM
-+	depends on NET_SCHED
-+	bool "DPAA2 Ethernet CEETM QoS"
-+	default n
-+	help
-+	  Enable QoS offloading support through the CEETM hardware block.
- endif
- 
- config FSL_DPAA2_PTP_CLOCK
---- a/drivers/net/ethernet/freescale/dpaa2/Makefile
-+++ b/drivers/net/ethernet/freescale/dpaa2/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_FSL_DPAA2_PTP_CLOCK)	+= fsl
- 
- fsl-dpaa2-eth-objs	:= dpaa2-eth.o dpaa2-ethtool.o dpni.o
- fsl-dpaa2-eth-${CONFIG_DEBUG_FS} += dpaa2-eth-debugfs.o
-+fsl-dpaa2-eth-${CONFIG_FSL_DPAA2_ETH_CEETM} += dpaa2-eth-ceetm.o
- fsl-dpaa2-ptp-objs	:= dpaa2-ptp.o dprtc.o
- 
- # Needed by the tracing framework
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-ceetm.c
-@@ -0,0 +1,1219 @@
-+/* Copyright 2017 NXP
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+
-+#include "dpaa2-eth-ceetm.h"
-+#include "dpaa2-eth.h"
-+
-+#define DPAA2_CEETM_DESCRIPTION "FSL DPAA2 CEETM qdisc"
-+/* Conversion formula from userspace passed Bps to expected Mbit */
-+#define dpaa2_eth_bps_to_mbit(rate) (rate >> 17)
-+
-+static const struct nla_policy dpaa2_ceetm_policy[DPAA2_CEETM_TCA_MAX] = {
-+	[DPAA2_CEETM_TCA_COPT] = { .len = sizeof(struct dpaa2_ceetm_tc_copt) },
-+	[DPAA2_CEETM_TCA_QOPS] = { .len = sizeof(struct dpaa2_ceetm_tc_qopt) },
-+};
-+
-+struct Qdisc_ops dpaa2_ceetm_qdisc_ops;
-+
-+static inline int dpaa2_eth_set_ch_shaping(struct dpaa2_eth_priv *priv,
-+					   struct dpni_tx_shaping_cfg *scfg,
-+					   struct dpni_tx_shaping_cfg *ecfg,
-+					   int coupled, int ch_id)
-+{
-+	int err = 0;
-+
-+	netdev_dbg(priv->net_dev, "%s: ch_id %d rate %d mbps\n", __func__,
-+		   ch_id, scfg->rate_limit);
-+	err = dpni_set_tx_shaping(priv->mc_io, 0, priv->mc_token, scfg,
-+				  ecfg, coupled);
-+	if (err)
-+		netdev_err(priv->net_dev, "dpni_set_tx_shaping err\n");
-+
-+	return err;
-+}
-+
-+static inline int dpaa2_eth_reset_ch_shaping(struct dpaa2_eth_priv *priv,
-+					     int ch_id)
-+{
-+	struct dpni_tx_shaping_cfg cfg = { 0 };
-+
-+	return dpaa2_eth_set_ch_shaping(priv, &cfg, &cfg, 0, ch_id);
-+}
-+
-+static inline int
-+dpaa2_eth_update_shaping_cfg(struct net_device *dev,
-+			     struct dpaa2_ceetm_shaping_cfg cfg,
-+			     struct dpni_tx_shaping_cfg *scfg,
-+			     struct dpni_tx_shaping_cfg *ecfg)
-+{
-+	scfg->rate_limit = dpaa2_eth_bps_to_mbit(cfg.cir);
-+	ecfg->rate_limit = dpaa2_eth_bps_to_mbit(cfg.eir);
-+
-+	if (cfg.cbs > DPAA2_ETH_MAX_BURST_SIZE) {
-+		netdev_err(dev, "Committed burst size must be under %d\n",
-+			   DPAA2_ETH_MAX_BURST_SIZE);
-+		return -EINVAL;
-+	}
-+
-+	scfg->max_burst_size = cfg.cbs;
-+
-+	if (cfg.ebs > DPAA2_ETH_MAX_BURST_SIZE) {
-+		netdev_err(dev, "Excess burst size must be under %d\n",
-+			   DPAA2_ETH_MAX_BURST_SIZE);
-+		return -EINVAL;
-+	}
-+
-+	ecfg->max_burst_size = cfg.ebs;
-+
-+	if ((!cfg.cir || !cfg.eir) && cfg.coupled) {
-+		netdev_err(dev, "Coupling can be set when both CIR and EIR are finite\n");
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+enum update_tx_prio {
-+	DPAA2_ETH_ADD_CQ,
-+	DPAA2_ETH_DEL_CQ,
-+};
-+
-+/* Normalize weights based on max passed value */
-+static inline int dpaa2_eth_normalize_tx_prio(struct dpaa2_ceetm_qdisc *priv)
-+{
-+	struct dpni_tx_schedule_cfg *sched_cfg;
-+	struct dpaa2_ceetm_class *cl;
-+	u32 qpri;
-+	u16 weight_max = 0, increment;
-+	int i;
-+
-+	/* Check the boundaries of the provided values */
-+	for (i = 0; i < priv->clhash.hashsize; i++)
-+		hlist_for_each_entry(cl, &priv->clhash.hash[i], common.hnode)
-+			weight_max = (weight_max == 0 ? cl->prio.weight :
-+				     (weight_max < cl->prio.weight ?
-+				      cl->prio.weight : weight_max));
-+
-+	/* If there are no elements, there's nothing to do */
-+	if (weight_max == 0)
-+		return 0;
-+
-+	increment = (DPAA2_CEETM_MAX_WEIGHT - DPAA2_CEETM_MIN_WEIGHT) /
-+		    weight_max;
-+
-+	for (i = 0; i < priv->clhash.hashsize; i++) {
-+		hlist_for_each_entry(cl, &priv->clhash.hash[i], common.hnode) {
-+			if (cl->prio.mode == STRICT_PRIORITY)
-+				continue;
-+
-+			qpri = cl->prio.qpri;
-+			sched_cfg = &priv->prio.tx_prio_cfg.tc_sched[qpri];
-+
-+			sched_cfg->delta_bandwidth =
-+				DPAA2_CEETM_MIN_WEIGHT +
-+				(cl->prio.weight * increment);
-+
-+			pr_debug("%s: Normalized CQ qpri %d weight to %d\n",
-+				 __func__, qpri, sched_cfg->delta_bandwidth);
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static inline int dpaa2_eth_update_tx_prio(struct dpaa2_eth_priv *priv,
-+					   struct dpaa2_ceetm_class *cl,
-+					   enum update_tx_prio type)
-+{
-+	struct dpaa2_ceetm_qdisc *sch = qdisc_priv(cl->parent);
-+	struct dpni_tx_schedule_cfg *sched_cfg;
-+	struct dpni_taildrop td = {0};
-+	u8 ch_id = 0, tc_id = 0;
-+	u32 qpri = 0;
-+	int err = 0;
-+
-+	qpri = cl->prio.qpri;
-+	tc_id = DPNI_BUILD_CH_TC(ch_id, qpri);
-+
-+	switch (type) {
-+	case DPAA2_ETH_ADD_CQ:
-+		/* Enable taildrop */
-+		td.enable = 1;
-+		td.units = DPNI_CONGESTION_UNIT_FRAMES;
-+		td.threshold = DPAA2_CEETM_TD_THRESHOLD;
-+		err = dpni_set_taildrop(priv->mc_io, 0, priv->mc_token,
-+					DPNI_CP_GROUP, DPNI_QUEUE_TX, tc_id,
-+					0, &td);
-+		if (err) {
-+			netdev_err(priv->net_dev, "Error enabling Tx taildrop %d\n",
-+				   err);
-+			return err;
-+		}
-+		break;
-+	case DPAA2_ETH_DEL_CQ:
-+		/* Disable taildrop */
-+		td.enable = 0;
-+		err = dpni_set_taildrop(priv->mc_io, 0, priv->mc_token,
-+					DPNI_CP_GROUP, DPNI_QUEUE_TX, tc_id,
-+					0, &td);
-+		if (err) {
-+			netdev_err(priv->net_dev, "Error disabling Tx taildrop %d\n",
-+				   err);
-+			return err;
-+		}
-+		break;
-+	}
-+
-+	/* We can zero out the structure in the tx_prio_conf array */
-+	if (type == DPAA2_ETH_DEL_CQ) {
-+		sched_cfg = &sch->prio.tx_prio_cfg.tc_sched[qpri];
-+		memset(sched_cfg, 0, sizeof(*sched_cfg));
-+	}
-+
-+	/* Normalize priorities */
-+	err = dpaa2_eth_normalize_tx_prio(sch);
-+
-+	/* Debug print goes here */
-+	print_hex_dump_debug("tx_prio: ", DUMP_PREFIX_OFFSET, 16, 1,
-+			     &sch->prio.tx_prio_cfg,
-+			     sizeof(sch->prio.tx_prio_cfg), 0);
-+
-+	/* Call dpni_set_tx_priorities for the entire prio qdisc */
-+	err = dpni_set_tx_priorities(priv->mc_io, 0, priv->mc_token,
-+				     &sch->prio.tx_prio_cfg);
-+	if (err)
-+		netdev_err(priv->net_dev, "dpni_set_tx_priorities err %d\n",
-+			   err);
-+
-+	return err;
-+}
-+
-+static void dpaa2_eth_ceetm_enable(struct dpaa2_eth_priv *priv)
-+{
-+	priv->ceetm_en = true;
-+}
-+
-+static void dpaa2_eth_ceetm_disable(struct dpaa2_eth_priv *priv)
-+{
-+	priv->ceetm_en = false;
-+}
-+
-+/* Find class in qdisc hash table using given handle */
-+static inline struct dpaa2_ceetm_class *dpaa2_ceetm_find(u32 handle,
-+							 struct Qdisc *sch)
-+{
-+	struct dpaa2_ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct Qdisc_class_common *clc;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : find class %X in qdisc %X\n",
-+		 __func__, handle, sch->handle);
-+
-+	clc = qdisc_class_find(&priv->clhash, handle);
-+	return clc ? container_of(clc, struct dpaa2_ceetm_class, common) : NULL;
-+}
-+
-+/* Insert a class in the qdisc's class hash */
-+static void dpaa2_ceetm_link_class(struct Qdisc *sch,
-+				   struct Qdisc_class_hash *clhash,
-+				   struct Qdisc_class_common *common)
-+{
-+	sch_tree_lock(sch);
-+	qdisc_class_hash_insert(clhash, common);
-+	sch_tree_unlock(sch);
-+	qdisc_class_hash_grow(sch, clhash);
-+}
-+
-+/* Destroy a ceetm class */
-+static void dpaa2_ceetm_cls_destroy(struct Qdisc *sch,
-+				    struct dpaa2_ceetm_class *cl)
-+{
-+	struct net_device *dev = qdisc_dev(sch);
-+	struct dpaa2_eth_priv *priv = netdev_priv(dev);
-+
-+	if (!cl)
-+		return;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : destroy class %X from under %X\n",
-+		 __func__, cl->common.classid, sch->handle);
-+
-+	/* Recurse into child first */
-+	if (cl->child) {
-+		qdisc_put(cl->child);
-+		cl->child = NULL;
-+	}
-+
-+	switch (cl->type) {
-+	case CEETM_ROOT:
-+		if (dpaa2_eth_reset_ch_shaping(priv, cl->root.ch_id))
-+			netdev_err(dev, "Error resetting channel shaping\n");
-+
-+		break;
-+
-+	case CEETM_PRIO:
-+		if (dpaa2_eth_update_tx_prio(priv, cl, DPAA2_ETH_DEL_CQ))
-+			netdev_err(dev, "Error resetting tx_priorities\n");
-+
-+		if (cl->prio.cstats)
-+			free_percpu(cl->prio.cstats);
-+
-+		break;
-+	}
-+
-+	tcf_block_put(cl->block);
-+	kfree(cl);
-+}
-+
-+/* Destroy a ceetm qdisc */
-+static void dpaa2_ceetm_destroy(struct Qdisc *sch)
-+{
-+	unsigned int i;
-+	struct hlist_node *next;
-+	struct dpaa2_ceetm_class *cl;
-+	struct dpaa2_ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct net_device *dev = qdisc_dev(sch);
-+	struct dpaa2_eth_priv *priv_eth = netdev_priv(dev);
-+
-+	pr_debug(KBUILD_BASENAME " : %s : destroy qdisc %X\n",
-+		 __func__, sch->handle);
-+
-+	/* All filters need to be removed before destroying the classes */
-+	tcf_block_put(priv->block);
-+
-+	for (i = 0; i < priv->clhash.hashsize; i++) {
-+		hlist_for_each_entry(cl, &priv->clhash.hash[i], common.hnode)
-+			tcf_block_put(cl->block);
-+	}
-+
-+	for (i = 0; i < priv->clhash.hashsize; i++) {
-+		hlist_for_each_entry_safe(cl, next, &priv->clhash.hash[i],
-+					  common.hnode)
-+			dpaa2_ceetm_cls_destroy(sch, cl);
-+	}
-+
-+	qdisc_class_hash_destroy(&priv->clhash);
-+
-+	switch (priv->type) {
-+	case CEETM_ROOT:
-+		dpaa2_eth_ceetm_disable(priv_eth);
-+
-+		if (priv->root.qstats)
-+			free_percpu(priv->root.qstats);
-+
-+		if (!priv->root.qdiscs)
-+			break;
-+
-+		/* Destroy the pfifo qdiscs in case they haven't been attached
-+		 * to the netdev queues yet.
-+		 */
-+		for (i = 0; i < dev->num_tx_queues; i++)
-+			if (priv->root.qdiscs[i])
-+				qdisc_put(priv->root.qdiscs[i]);
-+
-+		kfree(priv->root.qdiscs);
-+		break;
-+
-+	case CEETM_PRIO:
-+		if (priv->prio.parent)
-+			priv->prio.parent->child = NULL;
-+		break;
-+	}
-+}
-+
-+static int dpaa2_ceetm_dump(struct Qdisc *sch, struct sk_buff *skb)
-+{
-+	struct Qdisc *qdisc;
-+	unsigned int ntx, i;
-+	struct nlattr *nest;
-+	struct dpaa2_ceetm_tc_qopt qopt;
-+	struct dpaa2_ceetm_qdisc_stats *qstats;
-+	struct net_device *dev = qdisc_dev(sch);
-+	struct dpaa2_ceetm_qdisc *priv = qdisc_priv(sch);
-+
-+	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-+
-+	sch_tree_lock(sch);
-+	memset(&qopt, 0, sizeof(qopt));
-+	qopt.type = priv->type;
-+	qopt.shaped = priv->shaped;
-+
-+	switch (priv->type) {
-+	case CEETM_ROOT:
-+		/* Gather statistics from the underlying pfifo qdiscs */
-+		sch->q.qlen = 0;
-+		memset(&sch->bstats, 0, sizeof(sch->bstats));
-+		memset(&sch->qstats, 0, sizeof(sch->qstats));
-+
-+		for (ntx = 0; ntx < dev->num_tx_queues; ntx++) {
-+			qdisc = netdev_get_tx_queue(dev, ntx)->qdisc_sleeping;
-+			sch->q.qlen		+= qdisc->q.qlen;
-+			sch->bstats.bytes	+= qdisc->bstats.bytes;
-+			sch->bstats.packets	+= qdisc->bstats.packets;
-+			sch->qstats.qlen	+= qdisc->qstats.qlen;
-+			sch->qstats.backlog	+= qdisc->qstats.backlog;
-+			sch->qstats.drops	+= qdisc->qstats.drops;
-+			sch->qstats.requeues	+= qdisc->qstats.requeues;
-+			sch->qstats.overlimits	+= qdisc->qstats.overlimits;
-+		}
-+
-+		for_each_online_cpu(i) {
-+			qstats = per_cpu_ptr(priv->root.qstats, i);
-+			sch->qstats.drops += qstats->drops;
-+		}
-+
-+		break;
-+
-+	case CEETM_PRIO:
-+		qopt.prio_group_A = priv->prio.tx_prio_cfg.prio_group_A;
-+		qopt.prio_group_B = priv->prio.tx_prio_cfg.prio_group_B;
-+		qopt.separate_groups = priv->prio.tx_prio_cfg.separate_groups;
-+		break;
-+
-+	default:
-+		pr_err(KBUILD_BASENAME " : %s : invalid qdisc\n", __func__);
-+		sch_tree_unlock(sch);
-+		return -EINVAL;
-+	}
-+
-+	nest = nla_nest_start_noflag(skb, TCA_OPTIONS);
-+	if (!nest)
-+		goto nla_put_failure;
-+	if (nla_put(skb, DPAA2_CEETM_TCA_QOPS, sizeof(qopt), &qopt))
-+		goto nla_put_failure;
-+	nla_nest_end(skb, nest);
-+
-+	sch_tree_unlock(sch);
-+	return skb->len;
-+
-+nla_put_failure:
-+	sch_tree_unlock(sch);
-+	nla_nest_cancel(skb, nest);
-+	return -EMSGSIZE;
-+}
-+
-+static int dpaa2_ceetm_change_prio(struct Qdisc *sch,
-+				   struct dpaa2_ceetm_qdisc *priv,
-+				   struct dpaa2_ceetm_tc_qopt *qopt)
-+{
-+	/* TODO: Once LX2 support is added */
-+	/* priv->shaped = parent_cl->shaped; */
-+	priv->prio.tx_prio_cfg.prio_group_A = qopt->prio_group_A;
-+	priv->prio.tx_prio_cfg.prio_group_B = qopt->prio_group_B;
-+	priv->prio.tx_prio_cfg.separate_groups = qopt->separate_groups;
-+
-+	return 0;
-+}
-+
-+/* Edit a ceetm qdisc */
-+static int dpaa2_ceetm_change(struct Qdisc *sch, struct nlattr *opt,
-+			      struct netlink_ext_ack *extack)
-+{
-+	struct dpaa2_ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct nlattr *tb[DPAA2_CEETM_TCA_QOPS + 1];
-+	struct dpaa2_ceetm_tc_qopt *qopt;
-+	int err;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-+
-+	err = nla_parse_nested_deprecated(tb, DPAA2_CEETM_TCA_QOPS, opt,
-+					  dpaa2_ceetm_policy, extack);
-+	if (err < 0) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error in %s\n", __func__,
-+		       "nla_parse_nested_deprecated");
-+		return err;
-+	}
-+
-+	if (!tb[DPAA2_CEETM_TCA_QOPS]) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error in %s\n", __func__,
-+		       "tb");
-+		return -EINVAL;
-+	}
-+
-+	if (TC_H_MIN(sch->handle)) {
-+		pr_err("CEETM: a qdisc should not have a minor\n");
-+		return -EINVAL;
-+	}
-+
-+	qopt = nla_data(tb[DPAA2_CEETM_TCA_QOPS]);
-+
-+	if (priv->type != qopt->type) {
-+		pr_err("CEETM: qdisc %X is not of the provided type\n",
-+		       sch->handle);
-+		return -EINVAL;
-+	}
-+
-+	switch (priv->type) {
-+	case CEETM_PRIO:
-+		err = dpaa2_ceetm_change_prio(sch, priv, qopt);
-+		break;
-+	default:
-+		pr_err(KBUILD_BASENAME " : %s : invalid qdisc\n", __func__);
-+		err = -EINVAL;
-+	}
-+
-+	return err;
-+}
-+
-+/* Configure a root ceetm qdisc */
-+static int dpaa2_ceetm_init_root(struct Qdisc *sch,
-+				 struct dpaa2_ceetm_qdisc *priv,
-+				 struct dpaa2_ceetm_tc_qopt *qopt,
-+				 struct netlink_ext_ack *extack)
-+{
-+	struct net_device *dev = qdisc_dev(sch);
-+	struct dpaa2_eth_priv *priv_eth = netdev_priv(dev);
-+	struct netdev_queue *dev_queue;
-+	unsigned int i, parent_id;
-+	struct Qdisc *qdisc;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-+
-+	/* Validate inputs */
-+	if (sch->parent != TC_H_ROOT) {
-+		pr_err("CEETM: a root ceetm qdisc must be root\n");
-+		return -EINVAL;
-+	}
-+
-+	/* Pre-allocate underlying pfifo qdiscs.
-+	 *
-+	 * We want to offload shaping and scheduling decisions to the hardware.
-+	 * The pfifo qdiscs will be attached to the netdev queues and will
-+	 * guide the traffic from the IP stack down to the driver with minimum
-+	 * interference.
-+	 *
-+	 * The CEETM qdiscs and classes will be crossed when the traffic
-+	 * reaches the driver.
-+	 */
-+	priv->root.qdiscs = kcalloc(dev->num_tx_queues,
-+				    sizeof(priv->root.qdiscs[0]),
-+				    GFP_KERNEL);
-+	if (!priv->root.qdiscs)
-+		return -ENOMEM;
-+
-+	for (i = 0; i < dev->num_tx_queues; i++) {
-+		dev_queue = netdev_get_tx_queue(dev, i);
-+		parent_id = TC_H_MAKE(TC_H_MAJ(sch->handle),
-+				      TC_H_MIN(i + PFIFO_MIN_OFFSET));
-+
-+		qdisc = qdisc_create_dflt(dev_queue, &pfifo_qdisc_ops,
-+					  parent_id, extack);
-+		if (!qdisc)
-+			return -ENOMEM;
-+
-+		priv->root.qdiscs[i] = qdisc;
-+		qdisc->flags |= TCQ_F_ONETXQUEUE;
-+	}
-+
-+	sch->flags |= TCQ_F_MQROOT;
-+
-+	priv->root.qstats = alloc_percpu(struct dpaa2_ceetm_qdisc_stats);
-+	if (!priv->root.qstats) {
-+		pr_err(KBUILD_BASENAME " : %s : alloc_percpu() failed\n",
-+		       __func__);
-+		return -ENOMEM;
-+	}
-+
-+	dpaa2_eth_ceetm_enable(priv_eth);
-+	return 0;
-+}
-+
-+/* Configure a prio ceetm qdisc */
-+static int dpaa2_ceetm_init_prio(struct Qdisc *sch,
-+				 struct dpaa2_ceetm_qdisc *priv,
-+				 struct dpaa2_ceetm_tc_qopt *qopt)
-+{
-+	struct net_device *dev = qdisc_dev(sch);
-+	struct dpaa2_ceetm_class *parent_cl;
-+	struct Qdisc *parent_qdisc;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-+
-+	if (sch->parent == TC_H_ROOT) {
-+		pr_err("CEETM: a prio ceetm qdisc can not be root\n");
-+		return -EINVAL;
-+	}
-+
-+	parent_qdisc = qdisc_lookup(dev, TC_H_MAJ(sch->parent));
-+	if (strcmp(parent_qdisc->ops->id, dpaa2_ceetm_qdisc_ops.id)) {
-+		pr_err("CEETM: a ceetm qdisc can not be attached to other qdisc/class types\n");
-+		return -EINVAL;
-+	}
-+
-+	/* Obtain the parent root ceetm_class */
-+	parent_cl = dpaa2_ceetm_find(sch->parent, parent_qdisc);
-+
-+	if (!parent_cl || parent_cl->type != CEETM_ROOT) {
-+		pr_err("CEETM: a prio ceetm qdiscs can be added only under a root ceetm class\n");
-+		return -EINVAL;
-+	}
-+
-+	priv->prio.parent = parent_cl;
-+	parent_cl->child = sch;
-+
-+	return dpaa2_ceetm_change_prio(sch, priv, qopt);
-+}
-+
-+/* Configure a generic ceetm qdisc */
-+static int dpaa2_ceetm_init(struct Qdisc *sch, struct nlattr *opt,
-+			    struct netlink_ext_ack *extack)
-+{
-+	struct dpaa2_ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct net_device *dev = qdisc_dev(sch);
-+	struct nlattr *tb[DPAA2_CEETM_TCA_QOPS + 1];
-+	struct dpaa2_ceetm_tc_qopt *qopt;
-+	int err;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-+
-+	if (!netif_is_multiqueue(dev))
-+		return -EOPNOTSUPP;
-+
-+	err = tcf_block_get(&priv->block, &priv->filter_list, sch, extack);
-+	if (err) {
-+		pr_err("CEETM: unable to get tcf_block\n");
-+		return err;
-+	}
-+
-+	if (!opt) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error - opt = NULL\n",
-+		       __func__);
-+		return -EINVAL;
-+	}
-+
-+	err = nla_parse_nested_deprecated(tb, DPAA2_CEETM_TCA_QOPS, opt,
-+					  dpaa2_ceetm_policy, extack);
-+	if (err < 0) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error in %s\n", __func__,
-+		       "nla_parse_nested_deprecated");
-+		return err;
-+	}
-+
-+	if (!tb[DPAA2_CEETM_TCA_QOPS]) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error in %s\n", __func__,
-+		       "tb");
-+		return -EINVAL;
-+	}
-+
-+	if (TC_H_MIN(sch->handle)) {
-+		pr_err("CEETM: a qdisc should not have a minor\n");
-+		return -EINVAL;
-+	}
-+
-+	qopt = nla_data(tb[DPAA2_CEETM_TCA_QOPS]);
-+
-+	/* Initialize the class hash list. Each qdisc has its own class hash */
-+	err = qdisc_class_hash_init(&priv->clhash);
-+	if (err < 0) {
-+		pr_err(KBUILD_BASENAME " : %s : qdisc_class_hash_init failed\n",
-+		       __func__);
-+		return err;
-+	}
-+
-+	priv->type = qopt->type;
-+	priv->shaped = qopt->shaped;
-+
-+	switch (priv->type) {
-+	case CEETM_ROOT:
-+		err = dpaa2_ceetm_init_root(sch, priv, qopt, extack);
-+		break;
-+	case CEETM_PRIO:
-+		err = dpaa2_ceetm_init_prio(sch, priv, qopt);
-+		break;
-+	default:
-+		pr_err(KBUILD_BASENAME " : %s : invalid qdisc\n", __func__);
-+		/* Note: dpaa2_ceetm_destroy() will be called by our caller */
-+		err = -EINVAL;
-+	}
-+
-+	return err;
-+}
-+
-+/* Attach the underlying pfifo qdiscs */
-+static void dpaa2_ceetm_attach(struct Qdisc *sch)
-+{
-+	struct net_device *dev = qdisc_dev(sch);
-+	struct dpaa2_ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct Qdisc *qdisc, *old_qdisc;
-+	unsigned int i;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-+
-+	for (i = 0; i < dev->num_tx_queues; i++) {
-+		qdisc = priv->root.qdiscs[i];
-+		old_qdisc = dev_graft_qdisc(qdisc->dev_queue, qdisc);
-+		if (old_qdisc)
-+			qdisc_put(old_qdisc);
-+	}
-+
-+	/* Remove the references to the pfifo qdiscs since the kernel will
-+	 * destroy them when needed. No cleanup from our part is required from
-+	 * this point on.
-+	 */
-+	kfree(priv->root.qdiscs);
-+	priv->root.qdiscs = NULL;
-+}
-+
-+static unsigned long dpaa2_ceetm_cls_find(struct Qdisc *sch, u32 classid)
-+{
-+	struct dpaa2_ceetm_class *cl;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : classid %X from qdisc %X\n",
-+		 __func__, classid, sch->handle);
-+	cl = dpaa2_ceetm_find(classid, sch);
-+
-+	return (unsigned long)cl;
-+}
-+
-+static int dpaa2_ceetm_cls_change_root(struct dpaa2_ceetm_class *cl,
-+				       struct dpaa2_ceetm_tc_copt *copt,
-+				       struct net_device *dev)
-+{
-+	struct dpaa2_eth_priv *priv = netdev_priv(dev);
-+	struct dpni_tx_shaping_cfg scfg = { 0 }, ecfg = { 0 };
-+	int err = 0;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : class %X\n", __func__,
-+		 cl->common.classid);
-+
-+	if (!cl->shaped)
-+		return 0;
-+
-+	if (dpaa2_eth_update_shaping_cfg(dev, copt->shaping_cfg,
-+					 &scfg, &ecfg))
-+		return -EINVAL;
-+
-+	err = dpaa2_eth_set_ch_shaping(priv, &scfg, &ecfg,
-+				       copt->shaping_cfg.coupled,
-+				       cl->root.ch_id);
-+	if (err)
-+		return err;
-+
-+	memcpy(&cl->root.shaping_cfg, &copt->shaping_cfg,
-+	       sizeof(struct dpaa2_ceetm_shaping_cfg));
-+
-+	return err;
-+}
-+
-+static int dpaa2_ceetm_cls_change_prio(struct dpaa2_ceetm_class *cl,
-+				       struct dpaa2_ceetm_tc_copt *copt,
-+				       struct net_device *dev)
-+{
-+	struct dpaa2_ceetm_qdisc *sch = qdisc_priv(cl->parent);
-+	struct dpni_tx_schedule_cfg *sched_cfg;
-+	struct dpaa2_eth_priv *priv = netdev_priv(dev);
-+	int err;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : class %X mode %d weight %d\n",
-+		 __func__, cl->common.classid, copt->mode, copt->weight);
-+
-+	if (!cl->prio.cstats) {
-+		cl->prio.cstats = alloc_percpu(struct dpaa2_ceetm_class_stats);
-+		if (!cl->prio.cstats) {
-+			pr_err(KBUILD_BASENAME " : %s : alloc_percpu() failed\n",
-+			       __func__);
-+			return -ENOMEM;
-+		}
-+	}
-+
-+	cl->prio.mode = copt->mode;
-+	cl->prio.weight = copt->weight;
-+
-+	sched_cfg = &sch->prio.tx_prio_cfg.tc_sched[cl->prio.qpri];
-+
-+	switch (copt->mode) {
-+	case STRICT_PRIORITY:
-+		sched_cfg->mode = DPNI_TX_SCHED_STRICT_PRIORITY;
-+		break;
-+	case WEIGHTED_A:
-+		sched_cfg->mode = DPNI_TX_SCHED_WEIGHTED_A;
-+		break;
-+	case WEIGHTED_B:
-+		sched_cfg->mode = DPNI_TX_SCHED_WEIGHTED_B;
-+		break;
-+	}
-+
-+	err = dpaa2_eth_update_tx_prio(priv, cl, DPAA2_ETH_ADD_CQ);
-+
-+	return err;
-+}
-+
-+/* Add a new ceetm class */
-+static int dpaa2_ceetm_cls_add(struct Qdisc *sch, u32 classid,
-+			       struct dpaa2_ceetm_tc_copt *copt,
-+			       unsigned long *arg,
-+			       struct netlink_ext_ack *extack)
-+{
-+	struct dpaa2_ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct net_device *dev = qdisc_dev(sch);
-+	struct dpaa2_eth_priv *priv_eth = netdev_priv(dev);
-+	struct dpaa2_ceetm_class *cl;
-+	int err;
-+
-+	if (copt->type == CEETM_ROOT &&
-+	    priv->clhash.hashelems == dpaa2_eth_ch_count(priv_eth)) {
-+		pr_err("CEETM: only %d channel%s per DPNI allowed, sorry\n",
-+		       dpaa2_eth_ch_count(priv_eth),
-+		       dpaa2_eth_ch_count(priv_eth) == 1 ? "" : "s");
-+		return -EINVAL;
-+	}
-+
-+	if (copt->type == CEETM_PRIO &&
-+	    priv->clhash.hashelems == dpaa2_eth_tc_count(priv_eth)) {
-+		pr_err("CEETM: only %d queue%s per channel allowed, sorry\n",
-+		       dpaa2_eth_tc_count(priv_eth),
-+		       dpaa2_eth_tc_count(priv_eth) == 1 ? "" : "s");
-+		return -EINVAL;
-+	}
-+
-+	cl = kzalloc(sizeof(*cl), GFP_KERNEL);
-+	if (!cl)
-+		return -ENOMEM;
-+
-+	err = tcf_block_get(&cl->block, &cl->filter_list, sch, extack);
-+	if (err) {
-+		pr_err("%s: Unable to set new root class\n", __func__);
-+		goto out_free;
-+	}
-+
-+	cl->common.classid = classid;
-+	cl->parent = sch;
-+	cl->child = NULL;
-+
-+	/* Add class handle in Qdisc */
-+	dpaa2_ceetm_link_class(sch, &priv->clhash, &cl->common);
-+
-+	cl->shaped = copt->shaped;
-+	cl->type = copt->type;
-+
-+	/* Claim a CEETM channel / tc - DPAA2. will assume transition from
-+	 * classid to qdid/qpri, starting from qdid / qpri 0
-+	 */
-+	switch (copt->type) {
-+	case CEETM_ROOT:
-+		cl->root.ch_id = classid - sch->handle - 1;
-+		err = dpaa2_ceetm_cls_change_root(cl, copt, dev);
-+		break;
-+	case CEETM_PRIO:
-+		cl->prio.qpri = classid - sch->handle - 1;
-+		err = dpaa2_ceetm_cls_change_prio(cl, copt, dev);
-+		break;
-+	}
-+
-+	if (err) {
-+		pr_err("%s: Unable to set new %s class\n", __func__,
-+		       (copt->type == CEETM_ROOT ? "root" : "prio"));
-+		goto out_free;
-+	}
-+
-+	switch (copt->type) {
-+	case CEETM_ROOT:
-+		pr_debug(KBUILD_BASENAME " : %s : configured root class %X associated with channel qdid %d\n",
-+			 __func__, classid, cl->root.ch_id);
-+		break;
-+	case CEETM_PRIO:
-+		pr_debug(KBUILD_BASENAME " : %s : configured prio class %X associated with queue qpri %d\n",
-+			 __func__, classid, cl->prio.qpri);
-+		break;
-+	}
-+
-+	*arg = (unsigned long)cl;
-+	return 0;
-+
-+out_free:
-+	kfree(cl);
-+	return err;
-+}
-+
-+/* Add or configure a ceetm class */
-+static int dpaa2_ceetm_cls_change(struct Qdisc *sch, u32 classid, u32 parentid,
-+				  struct nlattr **tca, unsigned long *arg,
-+				  struct netlink_ext_ack *extack)
-+{
-+	struct dpaa2_ceetm_qdisc *priv;
-+	struct dpaa2_ceetm_class *cl = (struct dpaa2_ceetm_class *)*arg;
-+	struct nlattr *opt = tca[TCA_OPTIONS];
-+	struct nlattr *tb[DPAA2_CEETM_TCA_MAX];
-+	struct dpaa2_ceetm_tc_copt *copt;
-+	struct net_device *dev = qdisc_dev(sch);
-+	int err;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : classid %X under qdisc %X\n",
-+		 __func__, classid, sch->handle);
-+
-+	if (strcmp(sch->ops->id, dpaa2_ceetm_qdisc_ops.id)) {
-+		pr_err("CEETM: a ceetm class can not be attached to other qdisc/class types\n");
-+		return -EINVAL;
-+	}
-+
-+	priv = qdisc_priv(sch);
-+
-+	if (!opt) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error NULL opt\n", __func__);
-+		return -EINVAL;
-+	}
-+
-+	err = nla_parse_nested_deprecated(tb, DPAA2_CEETM_TCA_COPT, opt,
-+					  dpaa2_ceetm_policy, extack);
-+	if (err < 0) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error in %s\n", __func__,
-+		       "nla_parse_nested_deprecated");
-+		return -EINVAL;
-+	}
-+
-+	if (!tb[DPAA2_CEETM_TCA_COPT]) {
-+		pr_err(KBUILD_BASENAME " : %s : tc error in %s\n", __func__,
-+		       "tb");
-+		return -EINVAL;
-+	}
-+
-+	copt = nla_data(tb[DPAA2_CEETM_TCA_COPT]);
-+
-+	/* Configure an existing ceetm class */
-+	if (cl) {
-+		if (copt->type != cl->type) {
-+			pr_err("CEETM: class %X is not of the provided type\n",
-+			       cl->common.classid);
-+			return -EINVAL;
-+		}
-+
-+		switch (copt->type) {
-+		case CEETM_ROOT:
-+			return dpaa2_ceetm_cls_change_root(cl, copt, dev);
-+		case CEETM_PRIO:
-+			return dpaa2_ceetm_cls_change_prio(cl, copt, dev);
-+
-+		default:
-+			pr_err(KBUILD_BASENAME " : %s : invalid class\n",
-+			       __func__);
-+			return -EINVAL;
-+		}
-+	}
-+
-+	return dpaa2_ceetm_cls_add(sch, classid, copt, arg, extack);
-+}
-+
-+static void dpaa2_ceetm_cls_walk(struct Qdisc *sch, struct qdisc_walker *arg)
-+{
-+	struct dpaa2_ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct dpaa2_ceetm_class *cl;
-+	unsigned int i;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-+
-+	if (arg->stop)
-+		return;
-+
-+	for (i = 0; i < priv->clhash.hashsize; i++) {
-+		hlist_for_each_entry(cl, &priv->clhash.hash[i], common.hnode) {
-+			if (arg->count < arg->skip) {
-+				arg->count++;
-+				continue;
-+			}
-+			if (arg->fn(sch, (unsigned long)cl, arg) < 0) {
-+				arg->stop = 1;
-+				return;
-+			}
-+			arg->count++;
-+		}
-+	}
-+}
-+
-+static int dpaa2_ceetm_cls_dump(struct Qdisc *sch, unsigned long arg,
-+				struct sk_buff *skb, struct tcmsg *tcm)
-+{
-+	struct dpaa2_ceetm_class *cl = (struct dpaa2_ceetm_class *)arg;
-+	struct nlattr *nest;
-+	struct dpaa2_ceetm_tc_copt copt;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n",
-+		 __func__, cl->common.classid, sch->handle);
-+
-+	sch_tree_lock(sch);
-+
-+	tcm->tcm_parent = ((struct Qdisc *)cl->parent)->handle;
-+	tcm->tcm_handle = cl->common.classid;
-+
-+	memset(&copt, 0, sizeof(copt));
-+
-+	copt.shaped = cl->shaped;
-+	copt.type = cl->type;
-+
-+	switch (cl->type) {
-+	case CEETM_ROOT:
-+		if (cl->child)
-+			tcm->tcm_info = cl->child->handle;
-+
-+		memcpy(&copt.shaping_cfg, &cl->root.shaping_cfg,
-+		       sizeof(struct dpaa2_ceetm_shaping_cfg));
-+
-+		break;
-+
-+	case CEETM_PRIO:
-+		if (cl->child)
-+			tcm->tcm_info = cl->child->handle;
-+
-+		copt.mode = cl->prio.mode;
-+		copt.weight = cl->prio.weight;
-+
-+		break;
-+	}
-+
-+	nest = nla_nest_start_noflag(skb, TCA_OPTIONS);
-+	if (!nest)
-+		goto nla_put_failure;
-+	if (nla_put(skb, DPAA2_CEETM_TCA_COPT, sizeof(copt), &copt))
-+		goto nla_put_failure;
-+	nla_nest_end(skb, nest);
-+	sch_tree_unlock(sch);
-+	return skb->len;
-+
-+nla_put_failure:
-+	sch_tree_unlock(sch);
-+	nla_nest_cancel(skb, nest);
-+	return -EMSGSIZE;
-+}
-+
-+static int dpaa2_ceetm_cls_delete(struct Qdisc *sch, unsigned long arg)
-+{
-+	struct dpaa2_ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct dpaa2_ceetm_class *cl = (struct dpaa2_ceetm_class *)arg;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n",
-+		 __func__, cl->common.classid, sch->handle);
-+
-+	sch_tree_lock(sch);
-+	qdisc_class_hash_remove(&priv->clhash, &cl->common);
-+	sch_tree_unlock(sch);
-+	return 0;
-+}
-+
-+/* Get the class' child qdisc, if any */
-+static struct Qdisc *dpaa2_ceetm_cls_leaf(struct Qdisc *sch, unsigned long arg)
-+{
-+	struct dpaa2_ceetm_class *cl = (struct dpaa2_ceetm_class *)arg;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n",
-+		 __func__, cl->common.classid, sch->handle);
-+
-+	switch (cl->type) {
-+	case CEETM_ROOT:
-+	case CEETM_PRIO:
-+		return cl->child;
-+	}
-+
-+	return NULL;
-+}
-+
-+static int dpaa2_ceetm_cls_graft(struct Qdisc *sch, unsigned long arg,
-+				 struct Qdisc *new, struct Qdisc **old,
-+				 struct netlink_ext_ack *extack)
-+{
-+	if (new && strcmp(new->ops->id, dpaa2_ceetm_qdisc_ops.id)) {
-+		pr_err("CEETM: only ceetm qdiscs can be attached to ceetm classes\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	return 0;
-+}
-+
-+static int dpaa2_ceetm_cls_dump_stats(struct Qdisc *sch, unsigned long arg,
-+				      struct gnet_dump *d)
-+{
-+	struct dpaa2_ceetm_class *cl = (struct dpaa2_ceetm_class *)arg;
-+	struct gnet_stats_basic_packed tmp_bstats;
-+	struct dpaa2_ceetm_tc_xstats xstats;
-+	union dpni_statistics dpni_stats;
-+	struct net_device *dev = qdisc_dev(sch);
-+	struct dpaa2_eth_priv *priv_eth = netdev_priv(dev);
-+	u8 ch_id = 0;
-+	int err;
-+
-+	memset(&xstats, 0, sizeof(xstats));
-+	memset(&tmp_bstats, 0, sizeof(tmp_bstats));
-+
-+	if (cl->type == CEETM_ROOT)
-+		return 0;
-+
-+	err = dpni_get_statistics(priv_eth->mc_io, 0, priv_eth->mc_token, 3,
-+				  DPNI_BUILD_CH_TC(ch_id, cl->prio.qpri),
-+				  &dpni_stats);
-+	if (err)
-+		netdev_warn(dev, "dpni_get_stats(%d) failed - %d\n", 3, err);
-+
-+	xstats.ceetm_dequeue_bytes = dpni_stats.page_3.egress_dequeue_bytes;
-+	xstats.ceetm_dequeue_frames = dpni_stats.page_3.egress_dequeue_frames;
-+	xstats.ceetm_reject_bytes = dpni_stats.page_3.egress_reject_bytes;
-+	xstats.ceetm_reject_frames = dpni_stats.page_3.egress_reject_frames;
-+
-+	return gnet_stats_copy_app(d, &xstats, sizeof(xstats));
-+}
-+
-+static struct tcf_block *dpaa2_ceetm_tcf_block(struct Qdisc *sch,
-+					       unsigned long arg,
-+					       struct netlink_ext_ack *extack)
-+{
-+	struct dpaa2_ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct dpaa2_ceetm_class *cl = (struct dpaa2_ceetm_class *)arg;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n", __func__,
-+		 cl ? cl->common.classid : 0, sch->handle);
-+	return cl ? cl->block : priv->block;
-+}
-+
-+static unsigned long dpaa2_ceetm_tcf_bind(struct Qdisc *sch,
-+					  unsigned long parent,
-+					  u32 classid)
-+{
-+	struct dpaa2_ceetm_class *cl = dpaa2_ceetm_find(classid, sch);
-+
-+	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n", __func__,
-+		 cl ? cl->common.classid : 0, sch->handle);
-+	return (unsigned long)cl;
-+}
-+
-+static void dpaa2_ceetm_tcf_unbind(struct Qdisc *sch, unsigned long arg)
-+{
-+	struct dpaa2_ceetm_class *cl = (struct dpaa2_ceetm_class *)arg;
-+
-+	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n", __func__,
-+		 cl ? cl->common.classid : 0, sch->handle);
-+}
-+
-+const struct Qdisc_class_ops dpaa2_ceetm_cls_ops = {
-+	.graft		=	dpaa2_ceetm_cls_graft,
-+	.leaf		=	dpaa2_ceetm_cls_leaf,
-+	.find		=	dpaa2_ceetm_cls_find,
-+	.change		=	dpaa2_ceetm_cls_change,
-+	.delete		=	dpaa2_ceetm_cls_delete,
-+	.walk		=	dpaa2_ceetm_cls_walk,
-+	.tcf_block	=	dpaa2_ceetm_tcf_block,
-+	.bind_tcf	=	dpaa2_ceetm_tcf_bind,
-+	.unbind_tcf	=	dpaa2_ceetm_tcf_unbind,
-+	.dump		=	dpaa2_ceetm_cls_dump,
-+	.dump_stats	=	dpaa2_ceetm_cls_dump_stats,
-+};
-+
-+struct Qdisc_ops dpaa2_ceetm_qdisc_ops __read_mostly = {
-+	.id		=	"ceetm",
-+	.priv_size	=	sizeof(struct dpaa2_ceetm_qdisc),
-+	.cl_ops		=	&dpaa2_ceetm_cls_ops,
-+	.init		=	dpaa2_ceetm_init,
-+	.destroy	=	dpaa2_ceetm_destroy,
-+	.change		=	dpaa2_ceetm_change,
-+	.dump		=	dpaa2_ceetm_dump,
-+	.attach		=	dpaa2_ceetm_attach,
-+	.owner		=	THIS_MODULE,
-+};
-+
-+/* Run the filters and classifiers attached to the qdisc on the provided skb */
-+int dpaa2_ceetm_classify(struct sk_buff *skb, struct Qdisc *sch,
-+			 int *qdid, u8 *qpri)
-+{
-+	struct dpaa2_ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct dpaa2_ceetm_class *cl = NULL;
-+	struct tcf_result res;
-+	struct tcf_proto *tcf;
-+	int result;
-+
-+	tcf = rcu_dereference_bh(priv->filter_list);
-+	while (tcf && (result = tcf_classify(skb, tcf, &res, false)) >= 0) {
-+#ifdef CONFIG_NET_CLS_ACT
-+		switch (result) {
-+		case TC_ACT_QUEUED:
-+		case TC_ACT_STOLEN:
-+		case TC_ACT_SHOT:
-+			/* No valid class found due to action */
-+			return -1;
-+		}
-+#endif
-+		cl = (void *)res.class;
-+		if (!cl) {
-+			/* The filter leads to the qdisc */
-+			if (res.classid == sch->handle)
-+				return 0;
-+
-+			cl = dpaa2_ceetm_find(res.classid, sch);
-+			/* The filter leads to an invalid class */
-+			if (!cl)
-+				break;
-+		}
-+
-+		/* The class might have its own filters attached */
-+		tcf = rcu_dereference_bh(cl->filter_list);
-+	}
-+
-+	/* No valid class found */
-+	if (!cl)
-+		return 0;
-+
-+	switch (cl->type) {
-+	case CEETM_ROOT:
-+		*qdid = cl->root.ch_id;
-+
-+		/* The root class does not have a child prio qdisc */
-+		if (!cl->child)
-+			return 0;
-+
-+		/* Run the prio qdisc classifiers */
-+		return dpaa2_ceetm_classify(skb, cl->child, qdid, qpri);
-+
-+	case CEETM_PRIO:
-+		*qpri = cl->prio.qpri;
-+		break;
-+	}
-+
-+	return 0;
-+}
-+
-+int __init dpaa2_ceetm_register(void)
-+{
-+	int err = 0;
-+
-+	pr_debug(KBUILD_MODNAME ": " DPAA2_CEETM_DESCRIPTION "\n");
-+
-+	err = register_qdisc(&dpaa2_ceetm_qdisc_ops);
-+	if (unlikely(err))
-+		pr_err(KBUILD_MODNAME
-+		       ": %s:%hu:%s(): register_qdisc() = %d\n",
-+		       KBUILD_BASENAME ".c", __LINE__, __func__, err);
-+
-+	return err;
-+}
-+
-+void __exit dpaa2_ceetm_unregister(void)
-+{
-+	pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
-+		 KBUILD_BASENAME ".c", __func__);
-+
-+	unregister_qdisc(&dpaa2_ceetm_qdisc_ops);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-ceetm.h
-@@ -0,0 +1,207 @@
-+/* Copyright 2017 NXP
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *	 names of its contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef __DPAA2_ETH_CEETM_H
-+#define __DPAA2_ETH_CEETM_H
-+
-+#include <net/pkt_sched.h>
-+#include <net/pkt_cls.h>
-+#include <net/netlink.h>
-+
-+#include "dpaa2-eth.h"
-+
-+/* For functional purposes, there are num_tx_queues pfifo qdiscs through which
-+ * frames reach the driver. Their handles start from 1:21. Handles 1:1 to 1:20
-+ * are reserved for the maximum 32 CEETM channels (majors and minors are in
-+ * hex).
-+ */
-+#define PFIFO_MIN_OFFSET		0x21
-+
-+#define DPAA2_CEETM_MIN_WEIGHT		100
-+#define DPAA2_CEETM_MAX_WEIGHT		24800
-+
-+#define DPAA2_CEETM_TD_THRESHOLD	1000
-+
-+enum wbfs_group_type {
-+	WBFS_GRP_A,
-+	WBFS_GRP_B,
-+	WBFS_GRP_LARGE
-+};
-+
-+enum {
-+	DPAA2_CEETM_TCA_UNSPEC,
-+	DPAA2_CEETM_TCA_COPT,
-+	DPAA2_CEETM_TCA_QOPS,
-+	DPAA2_CEETM_TCA_MAX,
-+};
-+
-+/* CEETM configuration types */
-+enum dpaa2_ceetm_type {
-+	CEETM_ROOT = 1,
-+	CEETM_PRIO,
-+};
-+
-+enum {
-+	STRICT_PRIORITY = 0,
-+	WEIGHTED_A,
-+	WEIGHTED_B,
-+};
-+
-+struct dpaa2_ceetm_shaping_cfg {
-+	__u64 cir; /* committed information rate */
-+	__u64 eir; /* excess information rate */
-+	__u16 cbs; /* committed burst size */
-+	__u16 ebs; /* excess burst size */
-+	__u8 coupled; /* shaper coupling */
-+};
-+
-+extern const struct nla_policy ceetm_policy[DPAA2_CEETM_TCA_MAX];
-+
-+struct dpaa2_ceetm_class;
-+struct dpaa2_ceetm_qdisc_stats;
-+struct dpaa2_ceetm_class_stats;
-+
-+/* corresponds to CEETM shaping at LNI level */
-+struct dpaa2_root_q {
-+	struct Qdisc **qdiscs;
-+	struct dpaa2_ceetm_qdisc_stats __percpu *qstats;
-+};
-+
-+/* corresponds to the number of priorities a channel serves */
-+struct dpaa2_prio_q {
-+	struct dpaa2_ceetm_class *parent;
-+	struct dpni_tx_priorities_cfg tx_prio_cfg;
-+};
-+
-+struct dpaa2_ceetm_qdisc {
-+	struct Qdisc_class_hash clhash;
-+	struct tcf_proto *filter_list; /* qdisc attached filters */
-+	struct tcf_block *block;
-+
-+	enum dpaa2_ceetm_type type; /* ROOT/PRIO */
-+	bool shaped;
-+	union {
-+		struct dpaa2_root_q root;
-+		struct dpaa2_prio_q prio;
-+	};
-+};
-+
-+/* CEETM Qdisc configuration parameters */
-+struct dpaa2_ceetm_tc_qopt {
-+	enum dpaa2_ceetm_type type;
-+	__u16 shaped;
-+	__u8 prio_group_A;
-+	__u8 prio_group_B;
-+	__u8 separate_groups;
-+};
-+
-+/* root class - corresponds to a channel */
-+struct dpaa2_root_c {
-+	struct dpaa2_ceetm_shaping_cfg shaping_cfg;
-+	u32 ch_id;
-+};
-+
-+/* prio class - corresponds to a strict priority queue (group) */
-+struct dpaa2_prio_c {
-+	struct dpaa2_ceetm_class_stats __percpu *cstats;
-+	u32 qpri;
-+	u8 mode;
-+	u16 weight;
-+};
-+
-+struct dpaa2_ceetm_class {
-+	struct Qdisc_class_common common;
-+	struct tcf_proto *filter_list; /* class attached filters */
-+	struct tcf_block *block;
-+	struct Qdisc *parent;
-+	struct Qdisc *child;
-+
-+	enum dpaa2_ceetm_type type; /* ROOT/PRIO */
-+	bool shaped;
-+	union {
-+		struct dpaa2_root_c root;
-+		struct dpaa2_prio_c prio;
-+	};
-+};
-+
-+/* CEETM Class configuration parameters */
-+struct dpaa2_ceetm_tc_copt {
-+	enum dpaa2_ceetm_type type;
-+	struct dpaa2_ceetm_shaping_cfg shaping_cfg;
-+	__u16 shaped;
-+	__u8 mode;
-+	__u16 weight;
-+};
-+
-+/* CEETM stats */
-+struct dpaa2_ceetm_qdisc_stats {
-+	__u32 drops;
-+};
-+
-+struct dpaa2_ceetm_class_stats {
-+	/* Software counters */
-+	struct gnet_stats_basic_packed bstats;
-+	__u32 ern_drop_count;
-+};
-+
-+struct dpaa2_ceetm_tc_xstats {
-+	__u64 ceetm_dequeue_bytes;
-+	__u64 ceetm_dequeue_frames;
-+	__u64 ceetm_reject_bytes;
-+	__u64 ceetm_reject_frames;
-+};
-+
-+#ifdef CONFIG_FSL_DPAA2_ETH_CEETM
-+int __init dpaa2_ceetm_register(void);
-+void __exit dpaa2_ceetm_unregister(void);
-+int dpaa2_ceetm_classify(struct sk_buff *skb, struct Qdisc *sch,
-+			 int *qdid, u8 *qpri);
-+#else
-+static inline int dpaa2_ceetm_register(void)
-+{
-+	return 0;
-+}
-+
-+static inline void dpaa2_ceetm_unregister(void) {}
-+
-+static inline int dpaa2_ceetm_classify(struct sk_buff *skb, struct Qdisc *sch,
-+				       int *qdid, u8 *qpri)
-+{
-+	return 0;
-+}
-+#endif
-+
-+static inline bool dpaa2_eth_ceetm_is_enabled(struct dpaa2_eth_priv *priv)
-+{
-+	return priv->ceetm_en;
-+}
-+
-+#endif
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -18,6 +18,7 @@
- #include <net/sock.h>
- 
- #include "dpaa2-eth.h"
-+#include "dpaa2-eth-ceetm.h"
- 
- /* CREATE_TRACE_POINTS only needs to be defined once. Other dpa files
-  * using trace events only need to #include <trace/events/sched.h>
-@@ -816,7 +817,7 @@ static netdev_tx_t dpaa2_eth_tx(struct s
- 	unsigned int needed_headroom;
- 	u32 fd_len;
- 	u8 prio = 0;
--	int err, i;
-+	int err, i, ch_id = 0;
- 
- 	percpu_stats = this_cpu_ptr(priv->percpu_stats);
- 	percpu_extras = this_cpu_ptr(priv->percpu_extras);
-@@ -887,6 +888,15 @@ static netdev_tx_t dpaa2_eth_tx(struct s
- 	}
- 	fq = &priv->fq[queue_mapping];
- 
-+	if (dpaa2_eth_ceetm_is_enabled(priv)) {
-+		err = dpaa2_ceetm_classify(skb, net_dev->qdisc, &ch_id, &prio);
-+		if (err) {
-+			free_tx_fd(priv, fq, &fd, false);
-+			percpu_stats->tx_dropped++;
-+			return NETDEV_TX_OK;
-+		}
-+	}
-+
- 	fd_len = dpaa2_fd_get_len(&fd);
- 	nq = netdev_get_tx_queue(net_dev, queue_mapping);
- 	netdev_tx_sent_queue(nq, fd_len);
-@@ -2075,17 +2085,13 @@ static int update_xps(struct dpaa2_eth_p
- 	return err;
- }
- 
--static int dpaa2_eth_setup_tc(struct net_device *net_dev,
--			      enum tc_setup_type type, void *type_data)
-+static int dpaa2_eth_setup_mqprio(struct net_device *net_dev,
-+				  struct tc_mqprio_qopt *mqprio)
- {
- 	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
--	struct tc_mqprio_qopt *mqprio = type_data;
- 	u8 num_tc, num_queues;
- 	int i;
- 
--	if (type != TC_SETUP_QDISC_MQPRIO)
--		return -EOPNOTSUPP;
--
- 	mqprio->hw = TC_MQPRIO_HW_OFFLOAD_TCS;
- 	num_queues = dpaa2_eth_queue_count(priv);
- 	num_tc = mqprio->num_tc;
-@@ -2117,6 +2123,20 @@ out:
- 	return 0;
- }
- 
-+static int dpaa2_eth_setup_tc(struct net_device *net_dev,
-+			      enum tc_setup_type type,
-+			      void *type_data)
-+{
-+	switch (type) {
-+	case TC_SETUP_BLOCK:
-+		return 0;
-+	case TC_SETUP_QDISC_MQPRIO:
-+		return dpaa2_eth_setup_mqprio(net_dev, type_data);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
- static const struct net_device_ops dpaa2_eth_ops = {
- 	.ndo_open = dpaa2_eth_open,
- 	.ndo_start_xmit = dpaa2_eth_tx,
-@@ -4173,18 +4193,27 @@ static int __init dpaa2_eth_driver_init(
- 
- 	dpaa2_eth_dbg_init();
- 	err = fsl_mc_driver_register(&dpaa2_eth_driver);
--	if (err) {
--		dpaa2_eth_dbg_exit();
--		return err;
--	}
-+	if (err)
-+		goto out_debugfs_err;
-+
-+	err = dpaa2_ceetm_register();
-+	if (err)
-+		goto out_ceetm_err;
- 
- 	return 0;
-+
-+out_ceetm_err:
-+	fsl_mc_driver_unregister(&dpaa2_eth_driver);
-+out_debugfs_err:
-+	dpaa2_eth_dbg_exit();
-+	return err;
- }
- 
- static void __exit dpaa2_eth_driver_exit(void)
- {
--	dpaa2_eth_dbg_exit();
-+	dpaa2_ceetm_unregister();
- 	fsl_mc_driver_unregister(&dpaa2_eth_driver);
-+	dpaa2_eth_dbg_exit();
- }
- 
- module_init(dpaa2_eth_driver_init);
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -454,6 +454,8 @@ struct dpaa2_eth_priv {
- 	struct dpaa2_debugfs dbg;
- #endif
- 	struct dpni_tx_shaping_cfg shaping_cfg;
-+
-+	bool ceetm_en;
- };
- 
- #define DPAA2_RXH_SUPPORTED	(RXH_L2DA | RXH_VLAN | RXH_L3_PROTO \
-@@ -574,6 +576,11 @@ static inline unsigned int dpaa2_eth_rx_
- 	return priv->tx_data_offset - DPAA2_ETH_RX_HWA_SIZE;
- }
- 
-+static inline int dpaa2_eth_ch_count(struct dpaa2_eth_priv *priv)
-+{
-+	return 1;
-+}
-+
- int dpaa2_eth_set_hash(struct net_device *net_dev, u64 flags);
- int dpaa2_eth_set_cls(struct net_device *net_dev, u64 key);
- int dpaa2_eth_cls_key_size(u64 key);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0214-dpaa2-eth-Re-add-get_link_ksettings-ethtool-op.patch b/target/linux/layerscape/patches-5.4/701-net-0214-dpaa2-eth-Re-add-get_link_ksettings-ethtool-op.patch
deleted file mode 100644
index 25a9e90fbf..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0214-dpaa2-eth-Re-add-get_link_ksettings-ethtool-op.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 0a5243abf168351ea8409caf329448a3e18ab62f Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Tue, 24 Sep 2019 13:24:40 +0300
-Subject: [PATCH] dpaa2-eth: Re-add get_link_ksettings ethtool op
-
-Which was removed from upstream driver since without a MAC driver
-we have no support for changing link parameters there.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- .../net/ethernet/freescale/dpaa2/dpaa2-ethtool.c   | 47 +++++++++++++++++++++-
- 1 file changed, 46 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-@@ -85,7 +85,8 @@ dpaa2_eth_get_link_ksettings(struct net_
- {
- 	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
- 
--	link_settings->base.autoneg = AUTONEG_DISABLE;
-+	if (priv->link_state.options & DPNI_LINK_OPT_AUTONEG)
-+		link_settings->base.autoneg = AUTONEG_ENABLE;
- 	if (!(priv->link_state.options & DPNI_LINK_OPT_HALF_DUPLEX))
- 		link_settings->base.duplex = DUPLEX_FULL;
- 	link_settings->base.speed = priv->link_state.rate;
-@@ -93,6 +94,49 @@ dpaa2_eth_get_link_ksettings(struct net_
- 	return 0;
- }
- 
-+#define DPNI_DYNAMIC_LINK_SET_VER_MAJOR		7
-+#define DPNI_DYNAMIC_LINK_SET_VER_MINOR		1
-+static int
-+dpaa2_eth_set_link_ksettings(struct net_device *net_dev,
-+			     const struct ethtool_link_ksettings *link_settings)
-+{
-+	struct dpni_link_cfg cfg = {0};
-+	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-+	int err = 0;
-+
-+	/* If using an older MC version, the DPNI must be down
-+	 * in order to be able to change link settings. Taking steps to let
-+	 * the user know that.
-+	 */
-+	if (dpaa2_eth_cmp_dpni_ver(priv, DPNI_DYNAMIC_LINK_SET_VER_MAJOR,
-+				   DPNI_DYNAMIC_LINK_SET_VER_MINOR) < 0) {
-+		if (netif_running(net_dev)) {
-+			netdev_info(net_dev, "Interface must be brought down first.\n");
-+			return -EACCES;
-+		}
-+	}
-+
-+	cfg.rate = link_settings->base.speed;
-+	cfg.options = priv->link_state.options;
-+	if (link_settings->base.autoneg == AUTONEG_ENABLE)
-+		cfg.options |= DPNI_LINK_OPT_AUTONEG;
-+	else
-+		cfg.options &= ~DPNI_LINK_OPT_AUTONEG;
-+	if (link_settings->base.duplex  == DUPLEX_HALF)
-+		cfg.options |= DPNI_LINK_OPT_HALF_DUPLEX;
-+	else
-+		cfg.options &= ~DPNI_LINK_OPT_HALF_DUPLEX;
-+
-+	err = dpni_set_link_cfg(priv->mc_io, 0, priv->mc_token, &cfg);
-+	if (err)
-+		/* ethtool will be loud enough if we return an error; no point
-+		 * in putting our own error message on the console by default
-+		 */
-+		netdev_dbg(net_dev, "ERROR %d setting link cfg\n", err);
-+
-+	return err;
-+}
-+
- static void dpaa2_eth_get_pauseparam(struct net_device *net_dev,
- 				     struct ethtool_pauseparam *pause)
- {
-@@ -734,6 +778,7 @@ const struct ethtool_ops dpaa2_ethtool_o
- 	.get_drvinfo = dpaa2_eth_get_drvinfo,
- 	.get_link = ethtool_op_get_link,
- 	.get_link_ksettings = dpaa2_eth_get_link_ksettings,
-+	.set_link_ksettings = dpaa2_eth_set_link_ksettings,
- 	.get_pauseparam = dpaa2_eth_get_pauseparam,
- 	.set_pauseparam = dpaa2_eth_set_pauseparam,
- 	.get_sset_count = dpaa2_eth_get_sset_count,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0215-dpaa2-eth-Add-support-for-new-link-state-APIs.patch b/target/linux/layerscape/patches-5.4/701-net-0215-dpaa2-eth-Add-support-for-new-link-state-APIs.patch
deleted file mode 100644
index 19aa2e11d2..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0215-dpaa2-eth-Add-support-for-new-link-state-APIs.patch
+++ /dev/null
@@ -1,229 +0,0 @@
-From 0153f87972bfa3ef33bf369b8e91142f7c2b284a Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Wed, 17 Oct 2018 20:14:24 +0300
-Subject: [PATCH] dpaa2-eth: Add support for new link state APIs
-
-Add v2 of dpni_get_link_state() and dpni_set_link_cfg() commands.
-The new version allows setting & getting advertised and supported
-link options.
-
-Signed-off-by: Valentin Catalin Neacsu <valentin-catalin.neacsu@nxp.com>
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h | 33 ++++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpni.c     | 70 +++++++++++++++++++++++++
- drivers/net/ethernet/freescale/dpaa2/dpni.h     | 27 ++++++++++
- 3 files changed, 130 insertions(+)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
-@@ -44,9 +44,11 @@
- #define DPNI_CMDID_GET_QDID				DPNI_CMD(0x210)
- #define DPNI_CMDID_GET_TX_DATA_OFFSET			DPNI_CMD(0x212)
- #define DPNI_CMDID_GET_LINK_STATE			DPNI_CMD(0x215)
-+#define DPNI_CMDID_GET_LINK_STATE_V2			DPNI_CMD_V2(0x215)
- #define DPNI_CMDID_SET_MAX_FRAME_LENGTH			DPNI_CMD(0x216)
- #define DPNI_CMDID_GET_MAX_FRAME_LENGTH			DPNI_CMD(0x217)
- #define DPNI_CMDID_SET_LINK_CFG				DPNI_CMD(0x21A)
-+#define DPNI_CMDID_SET_LINK_CFG_V2			DPNI_CMD_V2(0x21A)
- #define DPNI_CMDID_SET_TX_SHAPING			DPNI_CMD_V2(0x21B)
- 
- #define DPNI_CMDID_SET_MCAST_PROMISC			DPNI_CMD(0x220)
-@@ -304,8 +306,22 @@ struct dpni_cmd_link_cfg {
- 	__le64 options;
- };
- 
-+struct dpni_cmd_set_link_cfg_v2 {
-+	/* cmd word 0 */
-+	__le64 pad0;
-+	/* cmd word 1 */
-+	__le32 rate;
-+	__le32 pad1;
-+	/* cmd word 2 */
-+	__le64 options;
-+	/* cmd word 3 */
-+	__le64 advertising;
-+};
-+
- #define DPNI_LINK_STATE_SHIFT		0
- #define DPNI_LINK_STATE_SIZE		1
-+#define DPNI_STATE_VALID_SHIFT		1
-+#define DPNI_STATE_VALID_SIZE		1
- 
- struct dpni_rsp_get_link_state {
- 	/* response word 0 */
-@@ -320,6 +336,23 @@ struct dpni_rsp_get_link_state {
- 	__le64 options;
- };
- 
-+struct dpni_rsp_get_link_state_v2 {
-+	/* response word 0 */
-+	__le32 pad0;
-+	/* from LSB: up:1, valid:1 */
-+	u8 flags;
-+	u8 pad1[3];
-+	/* response word 1 */
-+	__le32 rate;
-+	__le32 pad2;
-+	/* response word 2 */
-+	__le64 options;
-+	/* cmd word 3 */
-+	__le64 supported;
-+	/* cmd word 4 */
-+	__le64 advertising;
-+};
-+
- #define DPNI_COUPLED_SHIFT	0
- #define DPNI_COUPLED_SIZE	1
- 
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.c
-@@ -853,6 +853,36 @@ int dpni_set_link_cfg(struct fsl_mc_io *
- }
- 
- /**
-+ * dpni_set_link_cfg_v2() - set the link configuration.
-+ * @mc_io:      Pointer to MC portal's I/O object
-+ * @cmd_flags:  Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:      Token of DPNI object
-+ * @cfg:        Link configuration
-+ *
-+ * Return:      '0' on Success; Error code otherwise.
-+ */
-+int dpni_set_link_cfg_v2(struct fsl_mc_io *mc_io,
-+			 u32 cmd_flags,
-+			 u16 token,
-+			 const struct dpni_link_cfg *cfg)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	struct dpni_cmd_set_link_cfg_v2 *cmd_params;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_LINK_CFG_V2,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpni_cmd_set_link_cfg_v2 *)cmd.params;
-+	cmd_params->rate = cpu_to_le32(cfg->rate);
-+	cmd_params->options = cpu_to_le64(cfg->options);
-+	cmd_params->advertising = cpu_to_le64(cfg->advertising);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-  * dpni_get_link_cfg() - return the link configuration
-  * @mc_io:	Pointer to MC portal's I/O object
-  * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-@@ -924,6 +954,46 @@ int dpni_get_link_state(struct fsl_mc_io
- 
- 	return 0;
- }
-+
-+/**
-+ * dpni_get_link_state_v2() - Return the link state (either up or down)
-+ * @mc_io:      Pointer to MC portal's I/O object
-+ * @cmd_flags:  Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:      Token of DPNI object
-+ * @state:      Returned link state;
-+ *
-+ * Return:      '0' on Success; Error code otherwise.
-+ */
-+int dpni_get_link_state_v2(struct fsl_mc_io *mc_io,
-+			   u32 cmd_flags,
-+			   u16 token,
-+			   struct dpni_link_state *state)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	struct dpni_rsp_get_link_state_v2 *rsp_params;
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_LINK_STATE_V2,
-+					  cmd_flags,
-+					  token);
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	rsp_params = (struct dpni_rsp_get_link_state_v2 *)cmd.params;
-+	state->up = dpni_get_field(rsp_params->flags, LINK_STATE);
-+	state->state_valid = dpni_get_field(rsp_params->flags, STATE_VALID);
-+	state->rate = le32_to_cpu(rsp_params->rate);
-+	state->options = le64_to_cpu(rsp_params->options);
-+	state->supported = le64_to_cpu(rsp_params->supported);
-+	state->advertising = le64_to_cpu(rsp_params->advertising);
-+
-+	return 0;
-+}
- 
- /**
-  * dpni_set_tx_shaping() - Set the transmit shaping
---- a/drivers/net/ethernet/freescale/dpaa2/dpni.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.h
-@@ -522,6 +522,19 @@ int dpni_reset_statistics(struct fsl_mc_
-  * Enable priority flow control pause frames
-  */
- #define DPNI_LINK_OPT_PFC_PAUSE		0x0000000000000010ULL
-+/**
-+ * Advertised link speeds
-+ */
-+#define DPNI_ADVERTISED_10BASET_FULL           0x0000000000000001ULL
-+#define DPNI_ADVERTISED_100BASET_FULL          0x0000000000000002ULL
-+#define DPNI_ADVERTISED_1000BASET_FULL         0x0000000000000004ULL
-+#define DPNI_ADVERTISED_10000BASET_FULL        0x0000000000000010ULL
-+#define DPNI_ADVERTISED_2500BASEX_FULL         0x0000000000000020ULL
-+
-+/**
-+ * Advertise auto-negotiation enabled
-+ */
-+#define DPNI_ADVERTISED_AUTONEG                0x0000000000000008ULL
- 
- /**
-  * struct - Structure representing DPNI link configuration
-@@ -531,6 +544,7 @@ int dpni_reset_statistics(struct fsl_mc_
- struct dpni_link_cfg {
- 	u32 rate;
- 	u64 options;
-+	u64 advertising;
- };
- 
- int dpni_set_link_cfg(struct fsl_mc_io			*mc_io,
-@@ -538,6 +552,11 @@ int dpni_set_link_cfg(struct fsl_mc_io
- 		      u16				token,
- 		      const struct dpni_link_cfg	*cfg);
- 
-+int dpni_set_link_cfg_v2(struct fsl_mc_io		*mc_io,
-+			 u32				cmd_flags,
-+			 u16				token,
-+			 const struct dpni_link_cfg	*cfg);
-+
- int dpni_get_link_cfg(struct fsl_mc_io			*mc_io,
- 		      u32				cmd_flags,
- 		      u16				token,
-@@ -552,7 +571,10 @@ int dpni_get_link_cfg(struct fsl_mc_io
- struct dpni_link_state {
- 	u32	rate;
- 	u64	options;
-+	u64	supported;
-+	u64	advertising;
- 	int	up;
-+	int	state_valid;
- };
- 
- int dpni_get_link_state(struct fsl_mc_io	*mc_io,
-@@ -560,6 +582,11 @@ int dpni_get_link_state(struct fsl_mc_io
- 			u16			token,
- 			struct dpni_link_state	*state);
- 
-+int dpni_get_link_state_v2(struct fsl_mc_io	*mc_io,
-+			   u32			cmd_flags,
-+			   u16			token,
-+			   struct dpni_link_state	*state);
-+
- /**
-  * struct dpni_tx_shaping - Structure representing DPNI tx shaping configuration
-  * @rate_limit: rate in Mbps
diff --git a/target/linux/layerscape/patches-5.4/701-net-0216-dpaa2-eth-Add-autoneg-support.patch b/target/linux/layerscape/patches-5.4/701-net-0216-dpaa2-eth-Add-autoneg-support.patch
deleted file mode 100644
index b94fafae6c..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0216-dpaa2-eth-Add-autoneg-support.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From c6365855a6d9aef3b75e301d26872bc51398c2f3 Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Thu, 18 Oct 2018 18:59:41 +0300
-Subject: [PATCH] dpaa2-eth: Add autoneg support
-
-For MC versions that support it, use the new DPNI link APIs, which
-allow setting/getting of advertised and supported link modes.
-
-A mapping between DPNI link modes and ethtool ones is created to
-help converting from one to the other.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Signed-off-by: Valentin Catalin Neacsu <valentin-catalin.neacsu@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c   |  8 ++-
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h   |  3 ++
- .../net/ethernet/freescale/dpaa2/dpaa2-ethtool.c   | 57 ++++++++++++++++++++--
- 3 files changed, 62 insertions(+), 6 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -1357,7 +1357,13 @@ static int link_state_update(struct dpaa
- 	bool tx_pause;
- 	int err;
- 
--	err = dpni_get_link_state(priv->mc_io, 0, priv->mc_token, &state);
-+	if (dpaa2_eth_cmp_dpni_ver(priv, DPNI_LINK_AUTONEG_VER_MAJOR,
-+				   DPNI_LINK_AUTONEG_VER_MINOR) < 0)
-+		err = dpni_get_link_state(priv->mc_io, 0, priv->mc_token,
-+					  &state);
-+	else
-+		err = dpni_get_link_state_v2(priv->mc_io, 0, priv->mc_token,
-+					     &state);
- 	if (unlikely(err)) {
- 		netdev_err(priv->net_dev,
- 			   "dpni_get_link_state() failed\n");
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -543,6 +543,9 @@ static inline bool dpaa2_eth_rx_pause_en
- 	return !!(link_options & DPNI_LINK_OPT_PAUSE);
- }
- 
-+#define DPNI_LINK_AUTONEG_VER_MAJOR	7
-+#define DPNI_LINK_AUTONEG_VER_MINOR	8
-+
- static inline
- unsigned int dpaa2_eth_needed_headroom(struct dpaa2_eth_priv *priv,
- 				       struct sk_buff *skb)
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-@@ -79,6 +79,41 @@ static void dpaa2_eth_get_drvinfo(struct
- 		sizeof(drvinfo->bus_info));
- }
- 
-+struct dpaa2_eth_link_mode_map {
-+	u64 dpni_lm;
-+	u64 ethtool_lm;
-+};
-+
-+static const struct dpaa2_eth_link_mode_map dpaa2_eth_lm_map[] = {
-+	{DPNI_ADVERTISED_10BASET_FULL, ETHTOOL_LINK_MODE_10baseT_Full_BIT},
-+	{DPNI_ADVERTISED_100BASET_FULL, ETHTOOL_LINK_MODE_100baseT_Full_BIT},
-+	{DPNI_ADVERTISED_1000BASET_FULL, ETHTOOL_LINK_MODE_1000baseT_Full_BIT},
-+	{DPNI_ADVERTISED_10000BASET_FULL, ETHTOOL_LINK_MODE_10000baseT_Full_BIT},
-+	{DPNI_ADVERTISED_2500BASEX_FULL, ETHTOOL_LINK_MODE_2500baseT_Full_BIT},
-+	{DPNI_ADVERTISED_AUTONEG, ETHTOOL_LINK_MODE_Autoneg_BIT},
-+};
-+
-+static void link_mode_dpni2ethtool(u64 dpni_lm, unsigned long *ethtool_lm)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(dpaa2_eth_lm_map); i++) {
-+		if (dpni_lm & dpaa2_eth_lm_map[i].dpni_lm)
-+			__set_bit(dpaa2_eth_lm_map[i].ethtool_lm, ethtool_lm);
-+	}
-+}
-+
-+static void link_mode_ethtool2dpni(const unsigned long *ethtool_lm,
-+				   u64 *dpni_lm)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(dpaa2_eth_lm_map); i++) {
-+		if (test_bit(dpaa2_eth_lm_map[i].ethtool_lm, ethtool_lm))
-+			*dpni_lm |= dpaa2_eth_lm_map[i].dpni_lm;
-+	}
-+}
-+
- static int
- dpaa2_eth_get_link_ksettings(struct net_device *net_dev,
- 			     struct ethtool_link_ksettings *link_settings)
-@@ -91,6 +126,14 @@ dpaa2_eth_get_link_ksettings(struct net_
- 		link_settings->base.duplex = DUPLEX_FULL;
- 	link_settings->base.speed = priv->link_state.rate;
- 
-+	if (dpaa2_eth_cmp_dpni_ver(priv, DPNI_LINK_AUTONEG_VER_MAJOR,
-+				   DPNI_LINK_AUTONEG_VER_MINOR) >= 0) {
-+		link_mode_dpni2ethtool(priv->link_state.supported,
-+				       link_settings->link_modes.supported);
-+		link_mode_dpni2ethtool(priv->link_state.advertising,
-+				       link_settings->link_modes.advertising);
-+	}
-+
- 	return 0;
- }
- 
-@@ -127,12 +170,16 @@ dpaa2_eth_set_link_ksettings(struct net_
- 	else
- 		cfg.options &= ~DPNI_LINK_OPT_HALF_DUPLEX;
- 
--	err = dpni_set_link_cfg(priv->mc_io, 0, priv->mc_token, &cfg);
-+	if (dpaa2_eth_cmp_dpni_ver(priv, DPNI_LINK_AUTONEG_VER_MAJOR,
-+				   DPNI_LINK_AUTONEG_VER_MINOR) < 0) {
-+		err = dpni_set_link_cfg(priv->mc_io, 0, priv->mc_token, &cfg);
-+	} else {
-+		link_mode_ethtool2dpni(link_settings->link_modes.advertising,
-+				       &cfg.advertising);
-+		dpni_set_link_cfg_v2(priv->mc_io, 0, priv->mc_token, &cfg);
-+	}
- 	if (err)
--		/* ethtool will be loud enough if we return an error; no point
--		 * in putting our own error message on the console by default
--		 */
--		netdev_dbg(net_dev, "ERROR %d setting link cfg\n", err);
-+		netdev_err(net_dev, "dpni_set_link_cfg failed");
- 
- 	return err;
- }
diff --git a/target/linux/layerscape/patches-5.4/701-net-0217-dpaa2-eth-Don-t-use-netif_receive_skb_list-for-TCP-f.patch b/target/linux/layerscape/patches-5.4/701-net-0217-dpaa2-eth-Don-t-use-netif_receive_skb_list-for-TCP-f.patch
deleted file mode 100644
index 74b4b6d3c0..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0217-dpaa2-eth-Don-t-use-netif_receive_skb_list-for-TCP-f.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From 01e74b70dd8183aa191cd594ec9fa2879357811f Mon Sep 17 00:00:00 2001
-From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Date: Mon, 22 Jul 2019 18:52:39 +0300
-Subject: [PATCH] dpaa2-eth: Don't use netif_receive_skb_list for TCP frames
-
-Using Rx skb bulking for all frames may negatively impact the
-performance in some TCP termination scenarios, as it effectively
-bypasses GRO.
-
-Look at the hardware parse results of each ingress frame to see
-if a TCP header is present or not; for TCP frames fall back to
-the old implementation.
-
-Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 15 ++++++-
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 51 ++++++++++++++++++++++++
- 2 files changed, 65 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -353,6 +353,16 @@ out:
- 	return xdp_act;
- }
- 
-+static bool frame_is_tcp(const struct dpaa2_fd *fd, struct dpaa2_fas *fas)
-+{
-+	struct dpaa2_fapr *fapr = dpaa2_get_fapr(fas, false);
-+
-+	if (!(dpaa2_fd_get_frc(fd) & DPAA2_FD_FRC_FAPRV))
-+		return false;
-+
-+	return !!(fapr->faf_hi & DPAA2_FAF_HI_TCP_PRESENT);
-+}
-+
- /* Main Rx frame processing routine */
- static void dpaa2_eth_rx(struct dpaa2_eth_priv *priv,
- 			 struct dpaa2_eth_channel *ch,
-@@ -440,7 +450,10 @@ static void dpaa2_eth_rx(struct dpaa2_et
- 	percpu_stats->rx_packets++;
- 	percpu_stats->rx_bytes += dpaa2_fd_get_len(fd);
- 
--	list_add_tail(&skb->list, ch->rx_list);
-+	if (frame_is_tcp(fd, fas))
-+		napi_gro_receive(&ch->napi, skb);
-+	else
-+		list_add_tail(&skb->list, ch->rx_list);
- 
- 	return;
- 
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -178,6 +178,49 @@ struct dpaa2_fas {
-  */
- #define DPAA2_TS_OFFSET			0x8
- 
-+/* Frame annotation parse results */
-+struct dpaa2_fapr {
-+	/* 64-bit word 1 */
-+	__le32 faf_lo;
-+	__le16 faf_ext;
-+	__le16 nxt_hdr;
-+	/* 64-bit word 2 */
-+	__le64 faf_hi;
-+	/* 64-bit word 3 */
-+	u8 last_ethertype_offset;
-+	u8 vlan_tci_offset_n;
-+	u8 vlan_tci_offset_1;
-+	u8 llc_snap_offset;
-+	u8 eth_offset;
-+	u8 ip1_pid_offset;
-+	u8 shim_offset_2;
-+	u8 shim_offset_1;
-+	/* 64-bit word 4 */
-+	u8 l5_offset;
-+	u8 l4_offset;
-+	u8 gre_offset;
-+	u8 l3_offset_n;
-+	u8 l3_offset_1;
-+	u8 mpls_offset_n;
-+	u8 mpls_offset_1;
-+	u8 pppoe_offset;
-+	/* 64-bit word 5 */
-+	__le16 running_sum;
-+	__le16 gross_running_sum;
-+	u8 ipv6_frag_offset;
-+	u8 nxt_hdr_offset;
-+	u8 routing_hdr_offset_2;
-+	u8 routing_hdr_offset_1;
-+	/* 64-bit word 6 */
-+	u8 reserved[5]; /* Soft-parsing context */
-+	u8 ip_proto_offset_n;
-+	u8 nxt_hdr_frag_offset;
-+	u8 parse_error_code;
-+};
-+
-+#define DPAA2_FAPR_OFFSET		0x10
-+#define DPAA2_FAPR_SIZE			sizeof((struct dpaa2_fapr))
-+
- /* Frame annotation egress action descriptor */
- #define DPAA2_FAEAD_OFFSET		0x58
- 
-@@ -208,6 +251,11 @@ static inline __le64 *dpaa2_get_ts(void
- 	return dpaa2_get_hwa(buf_addr, swa) + DPAA2_TS_OFFSET;
- }
- 
-+static inline struct dpaa2_fapr *dpaa2_get_fapr(void *buf_addr, bool swa)
-+{
-+	return dpaa2_get_hwa(buf_addr, swa) + DPAA2_FAPR_OFFSET;
-+}
-+
- static inline struct dpaa2_faead *dpaa2_get_faead(void *buf_addr, bool swa)
- {
- 	return dpaa2_get_hwa(buf_addr, swa) + DPAA2_FAEAD_OFFSET;
-@@ -259,6 +307,9 @@ static inline struct dpaa2_faead *dpaa2_
- 					 DPAA2_FAS_L3CE		| \
- 					 DPAA2_FAS_L4CE)
- 
-+/* TCP indication in Frame Annotation Parse Results */
-+#define DPAA2_FAF_HI_TCP_PRESENT	BIT(23)
-+
- /* Time in milliseconds between link state updates */
- #define DPAA2_ETH_LINK_STATE_REFRESH	1000
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0218-bus-fsl-mc-Add-a-new-parameter-to-dprc_scan_objects-.patch b/target/linux/layerscape/patches-5.4/701-net-0218-bus-fsl-mc-Add-a-new-parameter-to-dprc_scan_objects-.patch
deleted file mode 100644
index 0fbf3d212d..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0218-bus-fsl-mc-Add-a-new-parameter-to-dprc_scan_objects-.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From 653fc2595283df6deb92ca3058c8d5dc1e129e91 Mon Sep 17 00:00:00 2001
-From: Diana Craciun <diana.craciun@nxp.com>
-Date: Fri, 13 Sep 2019 17:17:30 +0300
-Subject: [PATCH] bus/fsl-mc: Add a new parameter to dprc_scan_objects function
-
-Prepare the dprc_scan_objects function to be used by
-the VFIO mc driver code. The function is used to scan the mc
-objects by the bus driver. The same functionality is
-needed by the VFIO mc driver, but in this case the
-interrupt configuration is delayed until the userspace
-configures them. In order to use the same function in both
-drivers add a new parameter.
-
-Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
----
- drivers/bus/fsl-mc/dprc-driver.c | 33 +++++++++++++++++++--------------
- drivers/bus/fsl-mc/fsl-mc-bus.c  |  2 +-
- include/linux/fsl/mc.h           |  1 +
- 3 files changed, 21 insertions(+), 15 deletions(-)
-
---- a/drivers/bus/fsl-mc/dprc-driver.c
-+++ b/drivers/bus/fsl-mc/dprc-driver.c
-@@ -3,6 +3,7 @@
-  * Freescale data path resource container (DPRC) driver
-  *
-  * Copyright (C) 2014-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2019 NXP
-  * Author: German Rivera <German.Rivera@freescale.com>
-  *
-  */
-@@ -204,6 +205,8 @@ static void dprc_add_new_devices(struct
-  * @mc_bus_dev: pointer to the fsl-mc device that represents a DPRC object
-  * @driver_override: driver override to apply to new objects found in the
-  * DPRC, or NULL, if none.
-+ * @alloc_interrupts: if true the function allocates the interrupt pool,
-+ * otherwise the interrupt allocation is delayed
-  * @total_irq_count: If argument is provided the function populates the
-  * total number of IRQs created by objects in the DPRC.
-  *
-@@ -221,6 +224,7 @@ static void dprc_add_new_devices(struct
-  */
- int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev,
- 		      const char *driver_override,
-+			  bool alloc_interrupts,
- 		      unsigned int *total_irq_count)
- {
- 	int num_child_objects;
-@@ -302,19 +306,20 @@ int dprc_scan_objects(struct fsl_mc_devi
- 	 * Allocate IRQ's before binding the scanned devices with their
- 	 * respective drivers.
- 	 */
--	if (dev_get_msi_domain(&mc_bus_dev->dev) && !mc_bus->irq_resources) {
--		if (irq_count > FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS) {
--			dev_warn(&mc_bus_dev->dev,
--				 "IRQs needed (%u) exceed IRQs preallocated (%u)\n",
--				 irq_count, FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS);
--		}
-+	if (alloc_interrupts) {
-+		if (dev_get_msi_domain(&mc_bus_dev->dev) && !mc_bus->irq_resources) {
-+			if (irq_count > FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS) {
-+				dev_warn(&mc_bus_dev->dev,
-+					 "IRQs needed (%u) exceed IRQs preallocated (%u)\n",
-+					 irq_count, FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS);
-+			}
- 
--		error = fsl_mc_populate_irq_pool(mc_bus,
--				FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS);
--		if (error < 0)
--			return error;
-+			error = fsl_mc_populate_irq_pool(mc_bus,
-+					FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS);
-+			if (error < 0)
-+				return error;
-+		}
- 	}
--
- 	if (total_irq_count)
- 		*total_irq_count = irq_count;
- 
-@@ -350,7 +355,7 @@ static int dprc_scan_container(struct fs
- 	 * Discover objects in the DPRC:
- 	 */
- 	mutex_lock(&mc_bus->scan_mutex);
--	error = dprc_scan_objects(mc_bus_dev, NULL, NULL);
-+	error = dprc_scan_objects(mc_bus_dev, NULL, true, NULL);
- 	mutex_unlock(&mc_bus->scan_mutex);
- 	if (error < 0) {
- 		fsl_mc_cleanup_all_resource_pools(mc_bus_dev);
-@@ -379,7 +384,7 @@ static ssize_t rescan_store(struct devic
- 
- 	if (val) {
- 		mutex_lock(&root_mc_bus->scan_mutex);
--		dprc_scan_objects(root_mc_dev, NULL, NULL);
-+		dprc_scan_objects(root_mc_dev, NULL, true, NULL);
- 		mutex_unlock(&root_mc_bus->scan_mutex);
- 	}
- 
-@@ -448,7 +453,7 @@ static irqreturn_t dprc_irq0_handler_thr
- 		      DPRC_IRQ_EVENT_OBJ_CREATED)) {
- 		unsigned int irq_count;
- 
--		error = dprc_scan_objects(mc_dev, NULL, &irq_count);
-+		error = dprc_scan_objects(mc_dev, NULL, true, &irq_count);
- 		if (error < 0) {
- 			/*
- 			 * If the error is -ENXIO, we ignore it, as it indicates
---- a/drivers/bus/fsl-mc/fsl-mc-bus.c
-+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
-@@ -215,7 +215,7 @@ static int scan_fsl_mc_bus(struct device
- 	root_mc_dev = to_fsl_mc_device(dev);
- 	root_mc_bus = to_fsl_mc_bus(root_mc_dev);
- 	mutex_lock(&root_mc_bus->scan_mutex);
--	dprc_scan_objects(root_mc_dev, NULL, NULL);
-+	dprc_scan_objects(root_mc_dev, NULL, true, NULL);
- 	mutex_unlock(&root_mc_bus->scan_mutex);
- 
- exit:
---- a/include/linux/fsl/mc.h
-+++ b/include/linux/fsl/mc.h
-@@ -1010,6 +1010,7 @@ struct fsl_mc_bus {
- 
- int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev,
- 		      const char *driver_override,
-+			  bool alloc_interrupts,
- 		      unsigned int *total_irq_count);
- 
- int fsl_mc_find_msi_domain(struct device *mc_platform_dev,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0219-bus-fsl-mc-Extend-functions-from-the-bus-driver-to-b.patch b/target/linux/layerscape/patches-5.4/701-net-0219-bus-fsl-mc-Extend-functions-from-the-bus-driver-to-b.patch
deleted file mode 100644
index 8fcdac5604..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0219-bus-fsl-mc-Extend-functions-from-the-bus-driver-to-b.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 49878e0759161d357782802f954886bae7bcc83b Mon Sep 17 00:00:00 2001
-From: Diana Craciun <diana.craciun@nxp.com>
-Date: Thu, 21 Nov 2019 15:06:47 +0200
-Subject: [PATCH] bus/fsl-mc: Extend functions from the bus driver to be used
- by vfio-mc
-
-The bus/dpcr driver use some common functions, export those
-functions to be accessible from the vfio-mc driver.
-
-Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
----
- drivers/bus/fsl-mc/fsl-mc-private.h | 8 --------
- include/linux/fsl/mc.h              | 8 ++++++++
- 2 files changed, 8 insertions(+), 8 deletions(-)
-
---- a/drivers/bus/fsl-mc/fsl-mc-private.h
-+++ b/drivers/bus/fsl-mc/fsl-mc-private.h
-@@ -182,14 +182,6 @@ int fsl_mc_msi_domain_alloc_irqs(struct
- 
- void fsl_mc_msi_domain_free_irqs(struct device *dev);
- 
--int __must_check fsl_create_mc_io(struct device *dev,
--				  phys_addr_t mc_portal_phys_addr,
--				  u32 mc_portal_size,
--				  struct fsl_mc_device *dpmcp_dev,
--				  u32 flags, struct fsl_mc_io **new_mc_io);
--
--void fsl_destroy_mc_io(struct fsl_mc_io *mc_io);
--
- bool fsl_mc_is_root_dprc(struct device *dev);
- 
- #ifdef CONFIG_FSL_MC_UAPI_SUPPORT
---- a/include/linux/fsl/mc.h
-+++ b/include/linux/fsl/mc.h
-@@ -1013,6 +1013,14 @@ int dprc_scan_objects(struct fsl_mc_devi
- 			  bool alloc_interrupts,
- 		      unsigned int *total_irq_count);
- 
-+int __must_check fsl_create_mc_io(struct device *dev,
-+				  phys_addr_t mc_portal_phys_addr,
-+				  u32 mc_portal_size,
-+				  struct fsl_mc_device *dpmcp_dev,
-+				  u32 flags, struct fsl_mc_io **new_mc_io);
-+
-+void fsl_destroy_mc_io(struct fsl_mc_io *mc_io);
-+
- int fsl_mc_find_msi_domain(struct device *mc_platform_dev,
- 			   struct irq_domain **mc_msi_domain);
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0220-bus-fsl-mc-Set-the-QMAN-BMAN-region-flags.patch b/target/linux/layerscape/patches-5.4/701-net-0220-bus-fsl-mc-Set-the-QMAN-BMAN-region-flags.patch
deleted file mode 100644
index f4f53b2bf6..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0220-bus-fsl-mc-Set-the-QMAN-BMAN-region-flags.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 3c771fc6111d2703274d269b2b34183ce8be4df4 Mon Sep 17 00:00:00 2001
-From: Diana Craciun <diana.craciun@nxp.com>
-Date: Mon, 18 Nov 2019 11:37:59 +0200
-Subject: [PATCH] bus/fsl-mc: Set the QMAN/BMAN region flags
-
-The QMAN region can be memory mapped, so it should be
-of type IORESOURCE_MEM. Also use the bus specific bits
-in order to pass additional information about the region.
-
-Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
----
- drivers/bus/fsl-mc/fsl-mc-bus.c | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/drivers/bus/fsl-mc/fsl-mc-bus.c
-+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
-@@ -627,11 +627,8 @@ static int fsl_mc_device_get_mmio_region
- 
- 		regions[i].end = regions[i].start + region_desc.size - 1;
- 		regions[i].name = "fsl-mc object MMIO region";
--		regions[i].flags = IORESOURCE_IO;
--		if (region_desc.flags & DPRC_REGION_CACHEABLE)
--			regions[i].flags |= IORESOURCE_CACHEABLE;
--		if (region_desc.flags & DPRC_REGION_SHAREABLE)
--			regions[i].flags |= IORESOURCE_MEM;
-+		regions[i].flags = region_desc.flags & IORESOURCE_BITS;
-+		regions[i].flags |= IORESOURCE_MEM;
- 	}
- 
- 	mc_dev->regions = regions;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0221-soc-fsl-dpio-Adding-QMAN-multiple-enqueue-interface.patch b/target/linux/layerscape/patches-5.4/701-net-0221-soc-fsl-dpio-Adding-QMAN-multiple-enqueue-interface.patch
deleted file mode 100644
index 3c76eefe71..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0221-soc-fsl-dpio-Adding-QMAN-multiple-enqueue-interface.patch
+++ /dev/null
@@ -1,304 +0,0 @@
-From 1da6ba0350da068295d5bc5556193b21da38a388 Mon Sep 17 00:00:00 2001
-From: Youri Querry <youri.querry_1@nxp.com>
-Date: Mon, 4 Nov 2019 10:32:37 -0500
-Subject: [PATCH] soc: fsl: dpio: Adding QMAN multiple enqueue interface.
-
-Update of QMAN the interface to enqueue frame. We now support multiple
-enqueue (qbman_swp_enqueue_multiple) and multiple enqueue with
-a table of descriptor (qbman_swp_enqueue_multiple_desc).
-
-Signed-off-by: Youri Querry <youri.querry_1@nxp.com>
----
- drivers/soc/fsl/dpio/dpio-service.c | 69 ++++++++++++++++++++++++++++++++--
- drivers/soc/fsl/dpio/qbman-portal.c | 75 +++++++++++++++++++++++++++++++------
- drivers/soc/fsl/dpio/qbman-portal.h | 17 +++++++++
- include/soc/fsl/dpaa2-io.h          |  6 ++-
- 4 files changed, 152 insertions(+), 15 deletions(-)
-
---- a/drivers/soc/fsl/dpio/dpio-service.c
-+++ b/drivers/soc/fsl/dpio/dpio-service.c
-@@ -1,7 +1,7 @@
- // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
- /*
-  * Copyright 2014-2016 Freescale Semiconductor Inc.
-- * Copyright 2016 NXP
-+ * Copyright 2016-2019 NXP
-  *
-  */
- #include <linux/types.h>
-@@ -437,6 +437,69 @@ int dpaa2_io_service_enqueue_fq(struct d
- EXPORT_SYMBOL(dpaa2_io_service_enqueue_fq);
- 
- /**
-+ * dpaa2_io_service_enqueue_multiple_fq() - Enqueue multiple frames
-+ * to a frame queue using one fqid.
-+ * @d: the given DPIO service.
-+ * @fqid: the given frame queue id.
-+ * @fd: the frame descriptor which is enqueued.
-+ * @nb: number of frames to be enqueud
-+ *
-+ * Return 0 for successful enqueue, -EBUSY if the enqueue ring is not ready,
-+ * or -ENODEV if there is no dpio service.
-+ */
-+int dpaa2_io_service_enqueue_multiple_fq(struct dpaa2_io *d,
-+				u32 fqid,
-+				const struct dpaa2_fd *fd,
-+				int nb)
-+{
-+	struct qbman_eq_desc ed;
-+
-+	d = service_select(d);
-+	if (!d)
-+		return -ENODEV;
-+
-+	qbman_eq_desc_clear(&ed);
-+	qbman_eq_desc_set_no_orp(&ed, 0);
-+	qbman_eq_desc_set_fq(&ed, fqid);
-+
-+	return qbman_swp_enqueue_multiple(d->swp, &ed, fd, 0, nb);
-+}
-+EXPORT_SYMBOL(dpaa2_io_service_enqueue_multiple_fq);
-+
-+/**
-+ * dpaa2_io_service_enqueue_multiple_desc_fq() - Enqueue multiple frames
-+ * to different frame queue using a list of fqids.
-+ * @d: the given DPIO service.
-+ * @fqid: the given list of frame queue ids.
-+ * @fd: the frame descriptor which is enqueued.
-+ * @nb: number of frames to be enqueud
-+ *
-+ * Return 0 for successful enqueue, -EBUSY if the enqueue ring is not ready,
-+ * or -ENODEV if there is no dpio service.
-+ */
-+int dpaa2_io_service_enqueue_multiple_desc_fq(struct dpaa2_io *d,
-+				u32 *fqid,
-+				const struct dpaa2_fd *fd,
-+				int nb)
-+{
-+	int i;
-+	struct qbman_eq_desc ed[32];
-+
-+	d = service_select(d);
-+	if (!d)
-+		return -ENODEV;
-+
-+	for (i = 0; i < nb; i++) {
-+		qbman_eq_desc_clear(&ed[i]);
-+		qbman_eq_desc_set_no_orp(&ed[i], 0);
-+		qbman_eq_desc_set_fq(&ed[i], fqid[i]);
-+	}
-+
-+	return qbman_swp_enqueue_multiple_desc(d->swp, &ed[0], fd, nb);
-+}
-+EXPORT_SYMBOL(dpaa2_io_service_enqueue_multiple_desc_fq);
-+
-+/**
-  * dpaa2_io_service_enqueue_qd() - Enqueue a frame to a QD.
-  * @d: the given DPIO service.
-  * @qdid: the given queuing destination id.
-@@ -530,7 +593,7 @@ EXPORT_SYMBOL_GPL(dpaa2_io_service_acqui
- 
- /**
-  * dpaa2_io_store_create() - Create the dma memory storage for dequeue result.
-- * @max_frames: the maximum number of dequeued result for frames, must be <= 16.
-+ * @max_frames: the maximum number of dequeued result for frames, must be <= 32.
-  * @dev:        the device to allow mapping/unmapping the DMAable region.
-  *
-  * The size of the storage is "max_frames*sizeof(struct dpaa2_dq)".
-@@ -545,7 +608,7 @@ struct dpaa2_io_store *dpaa2_io_store_cr
- 	struct dpaa2_io_store *ret;
- 	size_t size;
- 
--	if (!max_frames || (max_frames > 16))
-+	if (!max_frames || (max_frames > 32))
- 		return NULL;
- 
- 	ret = kmalloc(sizeof(*ret), GFP_KERNEL);
---- a/drivers/soc/fsl/dpio/qbman-portal.c
-+++ b/drivers/soc/fsl/dpio/qbman-portal.c
-@@ -1,7 +1,7 @@
- // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
- /*
-  * Copyright (C) 2014-2016 Freescale Semiconductor, Inc.
-- * Copyright 2016 NXP
-+ * Copyright 2016-2019 NXP
-  *
-  */
- 
-@@ -86,7 +86,7 @@ enum qbman_sdqcr_fc {
- 
- #define dccvac(p) { asm volatile("dc cvac, %0;" : : "r" (p) : "memory"); }
- #define dcivac(p) { asm volatile("dc ivac, %0" : : "r"(p) : "memory"); }
--static inline void qbman_inval_prefetch(struct qbman_swp *p, uint32_t offset)
-+static inline void qbman_inval_prefetch(struct qbman_swp *p, u32 offset)
- {
- 	dcivac(p->addr_cena + offset);
- 	prefetch(p->addr_cena + offset);
-@@ -158,7 +158,7 @@ static inline u32 qbman_set_swp_cfg(u8 m
-  */
- struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d)
- {
--	struct qbman_swp *p = kmalloc(sizeof(*p), GFP_KERNEL);
-+	struct qbman_swp *p = kzalloc(sizeof(*p), GFP_KERNEL);
- 	u32 reg;
- 
- 	if (!p)
-@@ -380,7 +380,6 @@ enum qb_enqueue_commands {
- };
- 
- #define QB_ENQUEUE_CMD_ORP_ENABLE_SHIFT      2
--#define QB_ENQUEUE_CMD_IRQ_ON_DISPATCH_SHIFT 3
- #define QB_ENQUEUE_CMD_TARGET_TYPE_SHIFT     4
- 
- /**
-@@ -508,7 +507,7 @@ static inline void qbman_write_eqcr_am_r
- int qbman_swp_enqueue(struct qbman_swp *s, const struct qbman_eq_desc *d,
- 		      const struct dpaa2_fd *fd)
- {
--	struct qbman_eq_desc *p;
-+	struct qbman_eq_desc_with_fd *p;
- 	u32 eqar = qbman_read_register(s, QBMAN_CINH_SWP_EQAR);
- 
- 	if (!EQAR_SUCCESS(eqar))
-@@ -522,19 +521,19 @@ int qbman_swp_enqueue(struct qbman_swp *
- 	 * desc.orpid address alignment = 4
- 	 * desc.tgtid address alignment = 8
- 	 */
--	p->dca = d->dca;
--	p->seqnum = d->seqnum;
--	p->orpid = d->orpid;
--	memcpy(&p->tgtid, &d->tgtid, 24);
-+	p->desc.dca = d->dca;
-+	p->desc.seqnum = d->seqnum;
-+	p->desc.orpid = d->orpid;
-+	memcpy(&p->desc.tgtid, &d->tgtid, 24);
- 	memcpy(&p->fd, fd, sizeof(*fd));
- 
- 	if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) {
- 		/* Set the verb byte, have to substitute in the valid-bit */
- 		dma_wmb();
--		p->verb = d->verb | EQAR_VB(eqar);
-+		p->desc.verb = d->verb | EQAR_VB(eqar);
- 		dccvac(p);
- 	} else {
--		p->verb = d->verb | EQAR_VB(eqar);
-+		p->desc.verb = d->verb | EQAR_VB(eqar);
- 		dma_wmb();
- 		qbman_write_eqcr_am_rt_register(s, EQAR_IDX(eqar));
- 	}
-@@ -542,6 +541,60 @@ int qbman_swp_enqueue(struct qbman_swp *
- 	return 0;
- }
- 
-+/**
-+ * qbman_swp_enqueue_multiple() - Issue a multi enqueue command
-+ * using one enqueue descriptor
-+ * @s:  the software portal used for enqueue
-+ * @d:  the enqueue descriptor
-+ * @fd: table pointer of frame descriptor table to be enqueued
-+ * @flags: table pointer of flags, not used for the moment
-+ * @num_frames: number of fd to be enqueued
-+ *
-+ * Return the number of fd enqueued, or a negative error number.
-+ */
-+int qbman_swp_enqueue_multiple(struct qbman_swp *s,
-+			       const struct qbman_eq_desc *d,
-+			       const struct dpaa2_fd *fd,
-+			       uint32_t *flags,
-+			       int num_frames)
-+{
-+	int count = 0;
-+
-+	while (count < num_frames) {
-+		if (qbman_swp_enqueue(s, d, fd) != 0)
-+			break;
-+		count++;
-+	}
-+
-+	return count;
-+}
-+
-+/**
-+ * qbman_swp_enqueue_multiple_desc() - Issue a multi enqueue command
-+ * using multiple enqueue descriptor
-+ * @s:  the software portal used for enqueue
-+ * @d:  table of minimal enqueue descriptor
-+ * @fd: table pointer of frame descriptor table to be enqueued
-+ * @num_frames: number of fd to be enqueued
-+ *
-+ * Return the number of fd enqueued, or a negative error number.
-+ */
-+int qbman_swp_enqueue_multiple_desc(struct qbman_swp *s,
-+				    const struct qbman_eq_desc *d,
-+				    const struct dpaa2_fd *fd,
-+				    int num_frames)
-+{
-+	int count = 0;
-+
-+	while (count < num_frames) {
-+		if (qbman_swp_enqueue(s, &(d[count]), fd) != 0)
-+			break;
-+		count++;
-+	}
-+
-+	return count;
-+}
-+
- /* Static (push) dequeue */
- 
- /**
---- a/drivers/soc/fsl/dpio/qbman-portal.h
-+++ b/drivers/soc/fsl/dpio/qbman-portal.h
-@@ -88,6 +88,10 @@ struct qbman_eq_desc {
- 	u8 wae;
- 	u8 rspid;
- 	__le64 rsp_addr;
-+};
-+
-+struct qbman_eq_desc_with_fd {
-+	struct qbman_eq_desc desc;
- 	u8 fd[32];
- };
- 
-@@ -205,6 +209,19 @@ void *qbman_swp_mc_start(struct qbman_sw
- void qbman_swp_mc_submit(struct qbman_swp *p, void *cmd, u8 cmd_verb);
- void *qbman_swp_mc_result(struct qbman_swp *p);
- 
-+int
-+qbman_swp_enqueue_multiple(struct qbman_swp *s,
-+			   const struct qbman_eq_desc *d,
-+			   const struct dpaa2_fd *fd,
-+			   uint32_t *flags,
-+			   int num_frames);
-+
-+int
-+qbman_swp_enqueue_multiple_desc(struct qbman_swp *s,
-+				const struct qbman_eq_desc *d,
-+				const struct dpaa2_fd *fd,
-+				int num_frames);
-+
- /**
-  * qbman_result_is_DQ() - check if the dequeue result is a dequeue response
-  * @dq: the dequeue result to be checked
---- a/include/soc/fsl/dpaa2-io.h
-+++ b/include/soc/fsl/dpaa2-io.h
-@@ -1,7 +1,7 @@
- /* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
- /*
-  * Copyright 2014-2016 Freescale Semiconductor Inc.
-- * Copyright 2017 NXP
-+ * Copyright 2017-2019 NXP
-  *
-  */
- #ifndef __FSL_DPAA2_IO_H
-@@ -109,6 +109,10 @@ int dpaa2_io_service_pull_channel(struct
- 
- int dpaa2_io_service_enqueue_fq(struct dpaa2_io *d, u32 fqid,
- 				const struct dpaa2_fd *fd);
-+int dpaa2_io_service_enqueue_multiple_fq(struct dpaa2_io *d, u32 fqid,
-+				const struct dpaa2_fd *fd, int number_of_frame);
-+int dpaa2_io_service_enqueue_multiple_desc_fq(struct dpaa2_io *d, u32 *fqid,
-+				const struct dpaa2_fd *fd, int number_of_frame);
- int dpaa2_io_service_enqueue_qd(struct dpaa2_io *d, u32 qdid, u8 prio,
- 				u16 qdbin, const struct dpaa2_fd *fd);
- int dpaa2_io_service_release(struct dpaa2_io *d, u16 bpid,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0222-soc-fsl-dpio-QMAN-performance-improvement.-Function-.patch b/target/linux/layerscape/patches-5.4/701-net-0222-soc-fsl-dpio-QMAN-performance-improvement.-Function-.patch
deleted file mode 100644
index 79606f7beb..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0222-soc-fsl-dpio-QMAN-performance-improvement.-Function-.patch
+++ /dev/null
@@ -1,789 +0,0 @@
-From 5c88fa1440b2e4d0bdd46dad5370eb8c2181951b Mon Sep 17 00:00:00 2001
-From: Youri Querry <youri.querry_1@nxp.com>
-Date: Mon, 4 Nov 2019 11:00:24 -0500
-Subject: [PATCH] soc: fsl: dpio: QMAN performance improvement. Function
- pointer indirection.
-
-We are making the access decision in the initialization and
-setting the function pointers accordingly.
-
-Signed-off-by: Youri Querry <youri.querry_1@nxp.com>
----
- drivers/soc/fsl/dpio/qbman-portal.c | 455 ++++++++++++++++++++++++++++++------
- drivers/soc/fsl/dpio/qbman-portal.h | 130 ++++++++++-
- 2 files changed, 508 insertions(+), 77 deletions(-)
-
---- a/drivers/soc/fsl/dpio/qbman-portal.c
-+++ b/drivers/soc/fsl/dpio/qbman-portal.c
-@@ -84,6 +84,82 @@ enum qbman_sdqcr_fc {
- 	qbman_sdqcr_fc_up_to_3 = 1
- };
- 
-+/* Internal Function declaration */
-+static int qbman_swp_enqueue_direct(struct qbman_swp *s,
-+				    const struct qbman_eq_desc *d,
-+				    const struct dpaa2_fd *fd);
-+static int qbman_swp_enqueue_mem_back(struct qbman_swp *s,
-+				      const struct qbman_eq_desc *d,
-+				      const struct dpaa2_fd *fd);
-+static int qbman_swp_enqueue_multiple_direct(struct qbman_swp *s,
-+					     const struct qbman_eq_desc *d,
-+					     const struct dpaa2_fd *fd,
-+					     uint32_t *flags,
-+					     int num_frames);
-+static int qbman_swp_enqueue_multiple_mem_back(struct qbman_swp *s,
-+					       const struct qbman_eq_desc *d,
-+					       const struct dpaa2_fd *fd,
-+					       uint32_t *flags,
-+					       int num_frames);
-+static int
-+qbman_swp_enqueue_multiple_desc_direct(struct qbman_swp *s,
-+				       const struct qbman_eq_desc *d,
-+				       const struct dpaa2_fd *fd,
-+				       int num_frames);
-+static
-+int qbman_swp_enqueue_multiple_desc_mem_back(struct qbman_swp *s,
-+					     const struct qbman_eq_desc *d,
-+					     const struct dpaa2_fd *fd,
-+					     int num_frames);
-+static int qbman_swp_pull_direct(struct qbman_swp *s,
-+				 struct qbman_pull_desc *d);
-+static int qbman_swp_pull_mem_back(struct qbman_swp *s,
-+				   struct qbman_pull_desc *d);
-+
-+const struct dpaa2_dq *qbman_swp_dqrr_next_direct(struct qbman_swp *s);
-+const struct dpaa2_dq *qbman_swp_dqrr_next_mem_back(struct qbman_swp *s);
-+
-+static int qbman_swp_release_direct(struct qbman_swp *s,
-+				    const struct qbman_release_desc *d,
-+				    const u64 *buffers,
-+				    unsigned int num_buffers);
-+static int qbman_swp_release_mem_back(struct qbman_swp *s,
-+				      const struct qbman_release_desc *d,
-+				      const u64 *buffers,
-+				      unsigned int num_buffers);
-+
-+/* Function pointers */
-+int (*qbman_swp_enqueue_ptr)(struct qbman_swp *s,
-+			     const struct qbman_eq_desc *d,
-+			     const struct dpaa2_fd *fd)
-+	= qbman_swp_enqueue_direct;
-+
-+int (*qbman_swp_enqueue_multiple_ptr)(struct qbman_swp *s,
-+				      const struct qbman_eq_desc *d,
-+				      const struct dpaa2_fd *fd,
-+				      uint32_t *flags,
-+					     int num_frames)
-+	= qbman_swp_enqueue_multiple_direct;
-+
-+int
-+(*qbman_swp_enqueue_multiple_desc_ptr)(struct qbman_swp *s,
-+				       const struct qbman_eq_desc *d,
-+				       const struct dpaa2_fd *fd,
-+				       int num_frames)
-+	= qbman_swp_enqueue_multiple_desc_direct;
-+
-+int (*qbman_swp_pull_ptr)(struct qbman_swp *s, struct qbman_pull_desc *d)
-+			= qbman_swp_pull_direct;
-+
-+const struct dpaa2_dq *(*qbman_swp_dqrr_next_ptr)(struct qbman_swp *s)
-+			= qbman_swp_dqrr_next_direct;
-+
-+int (*qbman_swp_release_ptr)(struct qbman_swp *s,
-+			     const struct qbman_release_desc *d,
-+			     const u64 *buffers,
-+			     unsigned int num_buffers)
-+			= qbman_swp_release_direct;
-+
- #define dccvac(p) { asm volatile("dc cvac, %0;" : : "r" (p) : "memory"); }
- #define dcivac(p) { asm volatile("dc ivac, %0" : : "r"(p) : "memory"); }
- static inline void qbman_inval_prefetch(struct qbman_swp *p, u32 offset)
-@@ -227,6 +303,19 @@ struct qbman_swp *qbman_swp_init(const s
- 	 * applied when dequeues from a specific channel are enabled.
- 	 */
- 	qbman_write_register(p, QBMAN_CINH_SWP_SDQCR, 0);
-+
-+	if ((p->desc->qman_version & QMAN_REV_MASK) >= QMAN_REV_5000) {
-+		qbman_swp_enqueue_ptr =
-+			qbman_swp_enqueue_mem_back;
-+		qbman_swp_enqueue_multiple_ptr =
-+			qbman_swp_enqueue_multiple_mem_back;
-+		qbman_swp_enqueue_multiple_desc_ptr =
-+			qbman_swp_enqueue_multiple_desc_mem_back;
-+		qbman_swp_pull_ptr = qbman_swp_pull_mem_back;
-+		qbman_swp_dqrr_next_ptr = qbman_swp_dqrr_next_mem_back;
-+		qbman_swp_release_ptr = qbman_swp_release_mem_back;
-+	}
-+
- 	return p;
- }
- 
-@@ -494,7 +583,7 @@ static inline void qbman_write_eqcr_am_r
- }
- 
- /**
-- * qbman_swp_enqueue() - Issue an enqueue command
-+ * qbman_swp_enqueue_direct() - Issue an enqueue command
-  * @s:  the software portal used for enqueue
-  * @d:  the enqueue descriptor
-  * @fd: the frame descriptor to be enqueued
-@@ -504,7 +593,7 @@ static inline void qbman_write_eqcr_am_r
-  *
-  * Return 0 for successful enqueue, -EBUSY if the EQCR is not ready.
-  */
--int qbman_swp_enqueue(struct qbman_swp *s, const struct qbman_eq_desc *d,
-+int qbman_swp_enqueue_direct(struct qbman_swp *s, const struct qbman_eq_desc *d,
- 		      const struct dpaa2_fd *fd)
- {
- 	struct qbman_eq_desc_with_fd *p;
-@@ -527,22 +616,58 @@ int qbman_swp_enqueue(struct qbman_swp *
- 	memcpy(&p->desc.tgtid, &d->tgtid, 24);
- 	memcpy(&p->fd, fd, sizeof(*fd));
- 
--	if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) {
--		/* Set the verb byte, have to substitute in the valid-bit */
--		dma_wmb();
--		p->desc.verb = d->verb | EQAR_VB(eqar);
--		dccvac(p);
--	} else {
--		p->desc.verb = d->verb | EQAR_VB(eqar);
--		dma_wmb();
--		qbman_write_eqcr_am_rt_register(s, EQAR_IDX(eqar));
--	}
-+	/* Set the verb byte, have to substitute in the valid-bit */
-+	dma_wmb();
-+	p->desc.verb = d->verb | EQAR_VB(eqar);
-+	dccvac(p);
- 
- 	return 0;
- }
- 
- /**
-- * qbman_swp_enqueue_multiple() - Issue a multi enqueue command
-+ * qbman_swp_enqueue_mem_back() - Issue an enqueue command
-+ * @s:  the software portal used for enqueue
-+ * @d:  the enqueue descriptor
-+ * @fd: the frame descriptor to be enqueued
-+ *
-+ * Please note that 'fd' should only be NULL if the "action" of the
-+ * descriptor is "orp_hole" or "orp_nesn".
-+ *
-+ * Return 0 for successful enqueue, -EBUSY if the EQCR is not ready.
-+ */
-+int qbman_swp_enqueue_mem_back(struct qbman_swp *s,
-+			       const struct qbman_eq_desc *d,
-+			       const struct dpaa2_fd *fd)
-+{
-+	struct qbman_eq_desc_with_fd *p;
-+	u32 eqar = qbman_read_register(s, QBMAN_CINH_SWP_EQAR);
-+
-+	if (!EQAR_SUCCESS(eqar))
-+		return -EBUSY;
-+
-+	p = qbman_get_cmd(s, QBMAN_CENA_SWP_EQCR(EQAR_IDX(eqar)));
-+	/* This is mapped as DEVICE type memory, writes are
-+	 * with address alignment:
-+	 * desc.dca address alignment = 1
-+	 * desc.seqnum address alignment = 2
-+	 * desc.orpid address alignment = 4
-+	 * desc.tgtid address alignment = 8
-+	 */
-+	p->desc.dca = d->dca;
-+	p->desc.seqnum = d->seqnum;
-+	p->desc.orpid = d->orpid;
-+	memcpy(&p->desc.tgtid, &d->tgtid, 24);
-+	memcpy(&p->fd, fd, sizeof(*fd));
-+
-+	p->desc.verb = d->verb | EQAR_VB(eqar);
-+	dma_wmb();
-+	qbman_write_eqcr_am_rt_register(s, EQAR_IDX(eqar));
-+
-+	return 0;
-+}
-+
-+/**
-+ * qbman_swp_enqueue_multiple_direct() - Issue a multi enqueue command
-  * using one enqueue descriptor
-  * @s:  the software portal used for enqueue
-  * @d:  the enqueue descriptor
-@@ -552,16 +677,16 @@ int qbman_swp_enqueue(struct qbman_swp *
-  *
-  * Return the number of fd enqueued, or a negative error number.
-  */
--int qbman_swp_enqueue_multiple(struct qbman_swp *s,
--			       const struct qbman_eq_desc *d,
--			       const struct dpaa2_fd *fd,
--			       uint32_t *flags,
--			       int num_frames)
-+int qbman_swp_enqueue_multiple_direct(struct qbman_swp *s,
-+				      const struct qbman_eq_desc *d,
-+				      const struct dpaa2_fd *fd,
-+				      uint32_t *flags,
-+				      int num_frames)
- {
- 	int count = 0;
- 
- 	while (count < num_frames) {
--		if (qbman_swp_enqueue(s, d, fd) != 0)
-+		if (qbman_swp_enqueue_direct(s, d, fd) != 0)
- 			break;
- 		count++;
- 	}
-@@ -570,7 +695,35 @@ int qbman_swp_enqueue_multiple(struct qb
- }
- 
- /**
-- * qbman_swp_enqueue_multiple_desc() - Issue a multi enqueue command
-+ * qbman_swp_enqueue_multiple_mem_back() - Issue a multi enqueue command
-+ * using one enqueue descriptor
-+ * @s:  the software portal used for enqueue
-+ * @d:  the enqueue descriptor
-+ * @fd: table pointer of frame descriptor table to be enqueued
-+ * @flags: table pointer of flags, not used for the moment
-+ * @num_frames: number of fd to be enqueued
-+ *
-+ * Return the number of fd enqueued, or a negative error number.
-+ */
-+int qbman_swp_enqueue_multiple_mem_back(struct qbman_swp *s,
-+				      const struct qbman_eq_desc *d,
-+				      const struct dpaa2_fd *fd,
-+				      uint32_t *flags,
-+				      int num_frames)
-+{
-+	int count = 0;
-+
-+	while (count < num_frames) {
-+		if (qbman_swp_enqueue_mem_back(s, d, fd) != 0)
-+			break;
-+		count++;
-+	}
-+
-+	return count;
-+}
-+
-+/**
-+ * qbman_swp_enqueue_multiple_desc_direct() - Issue a multi enqueue command
-  * using multiple enqueue descriptor
-  * @s:  the software portal used for enqueue
-  * @d:  table of minimal enqueue descriptor
-@@ -579,15 +732,41 @@ int qbman_swp_enqueue_multiple(struct qb
-  *
-  * Return the number of fd enqueued, or a negative error number.
-  */
--int qbman_swp_enqueue_multiple_desc(struct qbman_swp *s,
--				    const struct qbman_eq_desc *d,
--				    const struct dpaa2_fd *fd,
--				    int num_frames)
-+int qbman_swp_enqueue_multiple_desc_direct(struct qbman_swp *s,
-+					   const struct qbman_eq_desc *d,
-+					   const struct dpaa2_fd *fd,
-+					   int num_frames)
- {
- 	int count = 0;
- 
- 	while (count < num_frames) {
--		if (qbman_swp_enqueue(s, &(d[count]), fd) != 0)
-+		if (qbman_swp_enqueue_direct(s, &(d[count]), fd) != 0)
-+			break;
-+		count++;
-+	}
-+
-+	return count;
-+}
-+
-+/**
-+ * qbman_swp_enqueue_multiple_desc_mem_back() - Issue a multi enqueue command
-+ * using multiple enqueue descriptor
-+ * @s:  the software portal used for enqueue
-+ * @d:  table of minimal enqueue descriptor
-+ * @fd: table pointer of frame descriptor table to be enqueued
-+ * @num_frames: number of fd to be enqueued
-+ *
-+ * Return the number of fd enqueued, or a negative error number.
-+ */
-+int qbman_swp_enqueue_multiple_desc_mem_back(struct qbman_swp *s,
-+					   const struct qbman_eq_desc *d,
-+					   const struct dpaa2_fd *fd,
-+					   int num_frames)
-+{
-+	int count = 0;
-+
-+	while (count < num_frames) {
-+		if (qbman_swp_enqueue_mem_back(s, &(d[count]), fd) != 0)
- 			break;
- 		count++;
- 	}
-@@ -750,7 +929,7 @@ void qbman_pull_desc_set_channel(struct
- }
- 
- /**
-- * qbman_swp_pull() - Issue the pull dequeue command
-+ * qbman_swp_pull_direct() - Issue the pull dequeue command
-  * @s: the software portal object
-  * @d: the software portal descriptor which has been configured with
-  *     the set of qbman_pull_desc_set_*() calls
-@@ -758,7 +937,7 @@ void qbman_pull_desc_set_channel(struct
-  * Return 0 for success, and -EBUSY if the software portal is not ready
-  * to do pull dequeue.
-  */
--int qbman_swp_pull(struct qbman_swp *s, struct qbman_pull_desc *d)
-+int qbman_swp_pull_direct(struct qbman_swp *s, struct qbman_pull_desc *d)
- {
- 	struct qbman_pull_desc *p;
- 
-@@ -776,19 +955,46 @@ int qbman_swp_pull(struct qbman_swp *s,
- 	p->dq_src = d->dq_src;
- 	p->rsp_addr = d->rsp_addr;
- 	p->rsp_addr_virt = d->rsp_addr_virt;
-+	dma_wmb();
-+	/* Set the verb byte, have to substitute in the valid-bit */
-+	p->verb = d->verb | s->vdq.valid_bit;
-+	s->vdq.valid_bit ^= QB_VALID_BIT;
-+	dccvac(p);
- 
--	if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) {
--		dma_wmb();
--		/* Set the verb byte, have to substitute in the valid-bit */
--		p->verb = d->verb | s->vdq.valid_bit;
--		s->vdq.valid_bit ^= QB_VALID_BIT;
--		dccvac(p);
--	} else {
--		p->verb = d->verb | s->vdq.valid_bit;
--		s->vdq.valid_bit ^= QB_VALID_BIT;
--		dma_wmb();
--		qbman_write_register(s, QBMAN_CINH_SWP_VDQCR_RT, QMAN_RT_MODE);
-+	return 0;
-+}
-+
-+/**
-+ * qbman_swp_pull_mem_back() - Issue the pull dequeue command
-+ * @s: the software portal object
-+ * @d: the software portal descriptor which has been configured with
-+ *     the set of qbman_pull_desc_set_*() calls
-+ *
-+ * Return 0 for success, and -EBUSY if the software portal is not ready
-+ * to do pull dequeue.
-+ */
-+int qbman_swp_pull_mem_back(struct qbman_swp *s, struct qbman_pull_desc *d)
-+{
-+	struct qbman_pull_desc *p;
-+
-+	if (!atomic_dec_and_test(&s->vdq.available)) {
-+		atomic_inc(&s->vdq.available);
-+		return -EBUSY;
- 	}
-+	s->vdq.storage = (void *)(uintptr_t)d->rsp_addr_virt;
-+	if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000)
-+		p = qbman_get_cmd(s, QBMAN_CENA_SWP_VDQCR);
-+	else
-+		p = qbman_get_cmd(s, QBMAN_CENA_SWP_VDQCR_MEM);
-+	p->numf = d->numf;
-+	p->tok = QMAN_DQ_TOKEN_VALID;
-+	p->dq_src = d->dq_src;
-+	p->rsp_addr = d->rsp_addr;
-+	p->rsp_addr_virt = d->rsp_addr_virt;
-+	p->verb = d->verb | s->vdq.valid_bit;
-+	s->vdq.valid_bit ^= QB_VALID_BIT;
-+	dma_wmb();
-+	qbman_write_register(s, QBMAN_CINH_SWP_VDQCR_RT, QMAN_RT_MODE);
- 
- 	return 0;
- }
-@@ -796,14 +1002,14 @@ int qbman_swp_pull(struct qbman_swp *s,
- #define QMAN_DQRR_PI_MASK   0xf
- 
- /**
-- * qbman_swp_dqrr_next() - Get an valid DQRR entry
-+ * qbman_swp_dqrr_next_direct() - Get an valid DQRR entry
-  * @s: the software portal object
-  *
-  * Return NULL if there are no unconsumed DQRR entries. Return a DQRR entry
-  * only once, so repeated calls can return a sequence of DQRR entries, without
-  * requiring they be consumed immediately or in any particular order.
-  */
--const struct dpaa2_dq *qbman_swp_dqrr_next(struct qbman_swp *s)
-+const struct dpaa2_dq *qbman_swp_dqrr_next_direct(struct qbman_swp *s)
- {
- 	u32 verb;
- 	u32 response_verb;
-@@ -845,10 +1051,97 @@ const struct dpaa2_dq *qbman_swp_dqrr_ne
- 		qbman_inval_prefetch(s,	QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
- 	}
- 
--	if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000)
--		p = qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
--	else
--		p = qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR_MEM(s->dqrr.next_idx));
-+	p = qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
-+	verb = p->dq.verb;
-+
-+	/*
-+	 * If the valid-bit isn't of the expected polarity, nothing there. Note,
-+	 * in the DQRR reset bug workaround, we shouldn't need to skip these
-+	 * check, because we've already determined that a new entry is available
-+	 * and we've invalidated the cacheline before reading it, so the
-+	 * valid-bit behaviour is repaired and should tell us what we already
-+	 * knew from reading PI.
-+	 */
-+	if ((verb & QB_VALID_BIT) != s->dqrr.valid_bit) {
-+		qbman_inval_prefetch(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
-+		return NULL;
-+	}
-+	/*
-+	 * There's something there. Move "next_idx" attention to the next ring
-+	 * entry (and prefetch it) before returning what we found.
-+	 */
-+	s->dqrr.next_idx++;
-+	s->dqrr.next_idx &= s->dqrr.dqrr_size - 1; /* Wrap around */
-+	if (!s->dqrr.next_idx)
-+		s->dqrr.valid_bit ^= QB_VALID_BIT;
-+
-+	/*
-+	 * If this is the final response to a volatile dequeue command
-+	 * indicate that the vdq is available
-+	 */
-+	flags = p->dq.stat;
-+	response_verb = verb & QBMAN_RESULT_MASK;
-+	if ((response_verb == QBMAN_RESULT_DQ) &&
-+	    (flags & DPAA2_DQ_STAT_VOLATILE) &&
-+	    (flags & DPAA2_DQ_STAT_EXPIRED))
-+		atomic_inc(&s->vdq.available);
-+
-+	qbman_inval_prefetch(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
-+
-+	return p;
-+}
-+
-+/**
-+ * qbman_swp_dqrr_next_mem_back() - Get an valid DQRR entry
-+ * @s: the software portal object
-+ *
-+ * Return NULL if there are no unconsumed DQRR entries. Return a DQRR entry
-+ * only once, so repeated calls can return a sequence of DQRR entries, without
-+ * requiring they be consumed immediately or in any particular order.
-+ */
-+const struct dpaa2_dq *qbman_swp_dqrr_next_mem_back(struct qbman_swp *s)
-+{
-+	u32 verb;
-+	u32 response_verb;
-+	u32 flags;
-+	struct dpaa2_dq *p;
-+
-+	/* Before using valid-bit to detect if something is there, we have to
-+	 * handle the case of the DQRR reset bug...
-+	 */
-+	if (unlikely(s->dqrr.reset_bug)) {
-+		/*
-+		 * We pick up new entries by cache-inhibited producer index,
-+		 * which means that a non-coherent mapping would require us to
-+		 * invalidate and read *only* once that PI has indicated that
-+		 * there's an entry here. The first trip around the DQRR ring
-+		 * will be much less efficient than all subsequent trips around
-+		 * it...
-+		 */
-+		u8 pi = qbman_read_register(s, QBMAN_CINH_SWP_DQPI) &
-+			QMAN_DQRR_PI_MASK;
-+
-+		/* there are new entries if pi != next_idx */
-+		if (pi == s->dqrr.next_idx)
-+			return NULL;
-+
-+		/*
-+		 * if next_idx is/was the last ring index, and 'pi' is
-+		 * different, we can disable the workaround as all the ring
-+		 * entries have now been DMA'd to so valid-bit checking is
-+		 * repaired. Note: this logic needs to be based on next_idx
-+		 * (which increments one at a time), rather than on pi (which
-+		 * can burst and wrap-around between our snapshots of it).
-+		 */
-+		if (s->dqrr.next_idx == (s->dqrr.dqrr_size - 1)) {
-+			pr_debug("next_idx=%d, pi=%d, clear reset bug\n",
-+				 s->dqrr.next_idx, pi);
-+			s->dqrr.reset_bug = 0;
-+		}
-+		qbman_inval_prefetch(s,	QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
-+	}
-+
-+	p = qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR_MEM(s->dqrr.next_idx));
- 	verb = p->dq.verb;
- 
- 	/*
-@@ -976,7 +1269,7 @@ void qbman_release_desc_set_rcdi(struct
- #define RAR_SUCCESS(rar) ((rar) & 0x100)
- 
- /**
-- * qbman_swp_release() - Issue a buffer release command
-+ * qbman_swp_release_direct() - Issue a buffer release command
-  * @s:           the software portal object
-  * @d:           the release descriptor
-  * @buffers:     a pointer pointing to the buffer address to be released
-@@ -984,8 +1277,9 @@ void qbman_release_desc_set_rcdi(struct
-  *
-  * Return 0 for success, -EBUSY if the release command ring is not ready.
-  */
--int qbman_swp_release(struct qbman_swp *s, const struct qbman_release_desc *d,
--		      const u64 *buffers, unsigned int num_buffers)
-+int qbman_swp_release_direct(struct qbman_swp *s,
-+			     const struct qbman_release_desc *d,
-+			     const u64 *buffers, unsigned int num_buffers)
- {
- 	int i;
- 	struct qbman_release_desc *p;
-@@ -999,29 +1293,60 @@ int qbman_swp_release(struct qbman_swp *
- 		return -EBUSY;
- 
- 	/* Start the release command */
--	if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000)
--		p = qbman_get_cmd(s, QBMAN_CENA_SWP_RCR(RAR_IDX(rar)));
--	else
--		p = qbman_get_cmd(s, QBMAN_CENA_SWP_RCR_MEM(RAR_IDX(rar)));
-+	p = qbman_get_cmd(s, QBMAN_CENA_SWP_RCR(RAR_IDX(rar)));
-+
- 	/* Copy the caller's buffer pointers to the command */
- 	for (i = 0; i < num_buffers; i++)
- 		p->buf[i] = cpu_to_le64(buffers[i]);
- 	p->bpid = d->bpid;
- 
--	if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) {
--		/*
--		 * Set the verb byte, have to substitute in the valid-bit
--		 * and the number of buffers.
--		 */
--		dma_wmb();
--		p->verb = d->verb | RAR_VB(rar) | num_buffers;
--		dccvac(p);
--	} else {
--		p->verb = d->verb | RAR_VB(rar) | num_buffers;
--		dma_wmb();
--		qbman_write_register(s, QBMAN_CINH_SWP_RCR_AM_RT +
--				     RAR_IDX(rar)  * 4, QMAN_RT_MODE);
--	}
-+	/*
-+	 * Set the verb byte, have to substitute in the valid-bit
-+	 * and the number of buffers.
-+	 */
-+	dma_wmb();
-+	p->verb = d->verb | RAR_VB(rar) | num_buffers;
-+	dccvac(p);
-+
-+	return 0;
-+}
-+
-+/**
-+ * qbman_swp_release_mem_back() - Issue a buffer release command
-+ * @s:           the software portal object
-+ * @d:           the release descriptor
-+ * @buffers:     a pointer pointing to the buffer address to be released
-+ * @num_buffers: number of buffers to be released,  must be less than 8
-+ *
-+ * Return 0 for success, -EBUSY if the release command ring is not ready.
-+ */
-+int qbman_swp_release_mem_back(struct qbman_swp *s,
-+			       const struct qbman_release_desc *d,
-+			       const u64 *buffers, unsigned int num_buffers)
-+{
-+	int i;
-+	struct qbman_release_desc *p;
-+	u32 rar;
-+
-+	if (!num_buffers || (num_buffers > 7))
-+		return -EINVAL;
-+
-+	rar = qbman_read_register(s, QBMAN_CINH_SWP_RAR);
-+	if (!RAR_SUCCESS(rar))
-+		return -EBUSY;
-+
-+	/* Start the release command */
-+	p = qbman_get_cmd(s, QBMAN_CENA_SWP_RCR_MEM(RAR_IDX(rar)));
-+
-+	/* Copy the caller's buffer pointers to the command */
-+	for (i = 0; i < num_buffers; i++)
-+		p->buf[i] = cpu_to_le64(buffers[i]);
-+	p->bpid = d->bpid;
-+
-+	p->verb = d->verb | RAR_VB(rar) | num_buffers;
-+	dma_wmb();
-+	qbman_write_register(s, QBMAN_CINH_SWP_RCR_AM_RT +
-+			     RAR_IDX(rar)  * 4, QMAN_RT_MODE);
- 
- 	return 0;
- }
---- a/drivers/soc/fsl/dpio/qbman-portal.h
-+++ b/drivers/soc/fsl/dpio/qbman-portal.h
-@@ -145,6 +145,33 @@ struct qbman_swp {
- 	} dqrr;
- };
- 
-+/* Function pointers */
-+extern
-+int (*qbman_swp_enqueue_ptr)(struct qbman_swp *s,
-+			     const struct qbman_eq_desc *d,
-+			     const struct dpaa2_fd *fd);
-+extern
-+int (*qbman_swp_enqueue_multiple_ptr)(struct qbman_swp *s,
-+				      const struct qbman_eq_desc *d,
-+				      const struct dpaa2_fd *fd,
-+				      uint32_t *flags,
-+				      int num_frames);
-+extern
-+int (*qbman_swp_enqueue_multiple_desc_ptr)(struct qbman_swp *s,
-+					   const struct qbman_eq_desc *d,
-+					   const struct dpaa2_fd *fd,
-+					   int num_frames);
-+extern
-+int (*qbman_swp_pull_ptr)(struct qbman_swp *s, struct qbman_pull_desc *d);
-+extern
-+const struct dpaa2_dq *(*qbman_swp_dqrr_next_ptr)(struct qbman_swp *s);
-+extern
-+int (*qbman_swp_release_ptr)(struct qbman_swp *s,
-+			     const struct qbman_release_desc *d,
-+			     const u64 *buffers,
-+			     unsigned int num_buffers);
-+
-+/* Functions */
- struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d);
- void qbman_swp_finish(struct qbman_swp *p);
- u32 qbman_swp_interrupt_read_status(struct qbman_swp *p);
-@@ -169,9 +196,6 @@ void qbman_pull_desc_set_wq(struct qbman
- void qbman_pull_desc_set_channel(struct qbman_pull_desc *d, u32 chid,
- 				 enum qbman_pull_type_e dct);
- 
--int qbman_swp_pull(struct qbman_swp *p, struct qbman_pull_desc *d);
--
--const struct dpaa2_dq *qbman_swp_dqrr_next(struct qbman_swp *s);
- void qbman_swp_dqrr_consume(struct qbman_swp *s, const struct dpaa2_dq *dq);
- 
- int qbman_result_has_new_result(struct qbman_swp *p, const struct dpaa2_dq *dq);
-@@ -186,17 +210,12 @@ void qbman_eq_desc_set_fq(struct qbman_e
- void qbman_eq_desc_set_qd(struct qbman_eq_desc *d, u32 qdid,
- 			  u32 qd_bin, u32 qd_prio);
- 
--int qbman_swp_enqueue(struct qbman_swp *p, const struct qbman_eq_desc *d,
--		      const struct dpaa2_fd *fd);
--
- int qbman_orp_drop(struct qbman_swp *s, u16 orpid, u16 seqnum);
- 
- void qbman_release_desc_clear(struct qbman_release_desc *d);
- void qbman_release_desc_set_bpid(struct qbman_release_desc *d, u16 bpid);
- void qbman_release_desc_set_rcdi(struct qbman_release_desc *d, int enable);
- 
--int qbman_swp_release(struct qbman_swp *s, const struct qbman_release_desc *d,
--		      const u64 *buffers, unsigned int num_buffers);
- int qbman_swp_acquire(struct qbman_swp *s, u16 bpid, u64 *buffers,
- 		      unsigned int num_buffers);
- int qbman_swp_alt_fq_state(struct qbman_swp *s, u32 fqid,
-@@ -209,18 +228,60 @@ void *qbman_swp_mc_start(struct qbman_sw
- void qbman_swp_mc_submit(struct qbman_swp *p, void *cmd, u8 cmd_verb);
- void *qbman_swp_mc_result(struct qbman_swp *p);
- 
--int
-+/**
-+ * qbman_swp_enqueue() - Issue an enqueue command
-+ * @s:  the software portal used for enqueue
-+ * @d:  the enqueue descriptor
-+ * @fd: the frame descriptor to be enqueued
-+ *
-+ * Return 0 for successful enqueue, -EBUSY if the EQCR is not ready.
-+ */
-+static inline int
-+qbman_swp_enqueue(struct qbman_swp *s, const struct qbman_eq_desc *d,
-+		  const struct dpaa2_fd *fd)
-+{
-+	return qbman_swp_enqueue_ptr(s, d, fd);
-+}
-+
-+/**
-+ * qbman_swp_enqueue_multiple() - Issue a multi enqueue command
-+ * using one enqueue descriptor
-+ * @s:  the software portal used for enqueue
-+ * @d:  the enqueue descriptor
-+ * @fd: table pointer of frame descriptor table to be enqueued
-+ * @flags: table pointer of QBMAN_ENQUEUE_FLAG_DCA flags, not used if NULL
-+ * @num_frames: number of fd to be enqueued
-+ *
-+ * Return the number of fd enqueued, or a negative error number.
-+ */
-+static inline int
- qbman_swp_enqueue_multiple(struct qbman_swp *s,
- 			   const struct qbman_eq_desc *d,
- 			   const struct dpaa2_fd *fd,
- 			   uint32_t *flags,
--			   int num_frames);
-+			   int num_frames)
-+{
-+	return qbman_swp_enqueue_multiple_ptr(s, d, fd, flags, num_frames);
-+}
- 
--int
-+/**
-+ * qbman_swp_enqueue_multiple_desc() - Issue a multi enqueue command
-+ * using multiple enqueue descriptor
-+ * @s:  the software portal used for enqueue
-+ * @d:  table of minimal enqueue descriptor
-+ * @fd: table pointer of frame descriptor table to be enqueued
-+ * @num_frames: number of fd to be enqueued
-+ *
-+ * Return the number of fd enqueued, or a negative error number.
-+ */
-+static inline int
- qbman_swp_enqueue_multiple_desc(struct qbman_swp *s,
- 				const struct qbman_eq_desc *d,
- 				const struct dpaa2_fd *fd,
--				int num_frames);
-+				int num_frames)
-+{
-+	return qbman_swp_enqueue_multiple_desc_ptr(s, d, fd, num_frames);
-+}
- 
- /**
-  * qbman_result_is_DQ() - check if the dequeue result is a dequeue response
-@@ -533,4 +594,49 @@ int qbman_bp_query(struct qbman_swp *s,
- 
- u32 qbman_bp_info_num_free_bufs(struct qbman_bp_query_rslt *a);
- 
-+/**
-+ * qbman_swp_release() - Issue a buffer release command
-+ * @s:           the software portal object
-+ * @d:           the release descriptor
-+ * @buffers:     a pointer pointing to the buffer address to be released
-+ * @num_buffers: number of buffers to be released,  must be less than 8
-+ *
-+ * Return 0 for success, -EBUSY if the release command ring is not ready.
-+ */
-+static inline int qbman_swp_release(struct qbman_swp *s,
-+				    const struct qbman_release_desc *d,
-+				    const u64 *buffers,
-+				    unsigned int num_buffers)
-+{
-+	return qbman_swp_release_ptr(s, d, buffers, num_buffers);
-+}
-+
-+/**
-+ * qbman_swp_pull() - Issue the pull dequeue command
-+ * @s: the software portal object
-+ * @d: the software portal descriptor which has been configured with
-+ *     the set of qbman_pull_desc_set_*() calls
-+ *
-+ * Return 0 for success, and -EBUSY if the software portal is not ready
-+ * to do pull dequeue.
-+ */
-+static inline int qbman_swp_pull(struct qbman_swp *s,
-+				 struct qbman_pull_desc *d)
-+{
-+	return qbman_swp_pull_ptr(s, d);
-+}
-+
-+/**
-+ * qbman_swp_dqrr_next() - Get an valid DQRR entry
-+ * @s: the software portal object
-+ *
-+ * Return NULL if there are no unconsumed DQRR entries. Return a DQRR entry
-+ * only once, so repeated calls can return a sequence of DQRR entries, without
-+ * requiring they be consumed immediately or in any particular order.
-+ */
-+static inline const struct dpaa2_dq *qbman_swp_dqrr_next(struct qbman_swp *s)
-+{
-+	return qbman_swp_dqrr_next_ptr(s);
-+}
-+
- #endif /* __FSL_QBMAN_PORTAL_H */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0223-soc-fsl-dpio-Replace-QMAN-array-mode-by-ring-mode-en.patch b/target/linux/layerscape/patches-5.4/701-net-0223-soc-fsl-dpio-Replace-QMAN-array-mode-by-ring-mode-en.patch
deleted file mode 100644
index f287cab97f..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0223-soc-fsl-dpio-Replace-QMAN-array-mode-by-ring-mode-en.patch
+++ /dev/null
@@ -1,649 +0,0 @@
-From 0b8c6bbb0a561f15598f6701089a992bdea3963c Mon Sep 17 00:00:00 2001
-From: Youri Querry <youri.querry_1@nxp.com>
-Date: Mon, 4 Nov 2019 11:03:09 -0500
-Subject: [PATCH] soc: fsl: dpio: Replace QMAN array mode by ring mode enqueue.
-
-This change of algorithm will enable faster bulk enqueue.
-This will grately benefit XDP bulk enqueue.
-
-Signed-off-by: Youri Querry <youri.querry_1@nxp.com>
----
- drivers/soc/fsl/dpio/qbman-portal.c | 420 +++++++++++++++++++++++++++---------
- drivers/soc/fsl/dpio/qbman-portal.h |  13 ++
- 2 files changed, 335 insertions(+), 98 deletions(-)
-
---- a/drivers/soc/fsl/dpio/qbman-portal.c
-+++ b/drivers/soc/fsl/dpio/qbman-portal.c
-@@ -8,6 +8,7 @@
- #include <asm/cacheflush.h>
- #include <linux/io.h>
- #include <linux/slab.h>
-+#include <linux/spinlock.h>
- #include <soc/fsl/dpaa2-global.h>
- 
- #include "qbman-portal.h"
-@@ -22,6 +23,7 @@
- 
- /* CINH register offsets */
- #define QBMAN_CINH_SWP_EQCR_PI      0x800
-+#define QBMAN_CINH_SWP_EQCR_CI	    0x840
- #define QBMAN_CINH_SWP_EQAR    0x8c0
- #define QBMAN_CINH_SWP_CR_RT        0x900
- #define QBMAN_CINH_SWP_VDQCR_RT     0x940
-@@ -45,6 +47,8 @@
- #define QBMAN_CENA_SWP_CR      0x600
- #define QBMAN_CENA_SWP_RR(vb)  (0x700 + ((u32)(vb) >> 1))
- #define QBMAN_CENA_SWP_VDQCR   0x780
-+#define QBMAN_CENA_SWP_EQCR_CI 0x840
-+#define QBMAN_CENA_SWP_EQCR_CI_MEMBACK 0x1840
- 
- /* CENA register offsets in memory-backed mode */
- #define QBMAN_CENA_SWP_DQRR_MEM(n)  (0x800 + ((u32)(n) << 6))
-@@ -72,6 +76,12 @@
- /* opaque token for static dequeues */
- #define QMAN_SDQCR_TOKEN    0xbb
- 
-+#define QBMAN_EQCR_DCA_IDXMASK          0x0f
-+#define QBMAN_ENQUEUE_FLAG_DCA          (1ULL << 31)
-+
-+#define EQ_DESC_SIZE_WITHOUT_FD 29
-+#define EQ_DESC_SIZE_FD_START 32
-+
- enum qbman_sdqcr_dct {
- 	qbman_sdqcr_dct_null = 0,
- 	qbman_sdqcr_dct_prio_ics,
-@@ -224,6 +234,15 @@ static inline u32 qbman_set_swp_cfg(u8 m
- 
- #define QMAN_RT_MODE	   0x00000100
- 
-+static inline u8 qm_cyc_diff(u8 ringsize, u8 first, u8 last)
-+{
-+	/* 'first' is included, 'last' is excluded */
-+	if (first <= last)
-+		return last - first;
-+	else
-+		return (2 * ringsize) - (first - last);
-+}
-+
- /**
-  * qbman_swp_init() - Create a functional object representing the given
-  *                    QBMan portal descriptor.
-@@ -236,6 +255,10 @@ struct qbman_swp *qbman_swp_init(const s
- {
- 	struct qbman_swp *p = kzalloc(sizeof(*p), GFP_KERNEL);
- 	u32 reg;
-+	u32 mask_size;
-+	u32 eqcr_pi;
-+
-+	spin_lock_init(&p->access_spinlock);
- 
- 	if (!p)
- 		return NULL;
-@@ -264,25 +287,38 @@ struct qbman_swp *qbman_swp_init(const s
- 	p->addr_cena = d->cena_bar;
- 	p->addr_cinh = d->cinh_bar;
- 
--	if ((p->desc->qman_version & QMAN_REV_MASK) >= QMAN_REV_5000)
--		memset(p->addr_cena, 0, 64 * 1024);
-+	if ((p->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) {
- 
--	reg = qbman_set_swp_cfg(p->dqrr.dqrr_size,
--				0, /* Writes cacheable */
--				0, /* EQCR_CI stashing threshold */
--				3, /* RPM: Valid bit mode, RCR in array mode */
--				2, /* DCM: Discrete consumption ack mode */
--				3, /* EPM: Valid bit mode, EQCR in array mode */
--				1, /* mem stashing drop enable == TRUE */
--				1, /* mem stashing priority == TRUE */
--				1, /* mem stashing enable == TRUE */
--				1, /* dequeue stashing priority == TRUE */
--				0, /* dequeue stashing enable == FALSE */
--				0); /* EQCR_CI stashing priority == FALSE */
--	if ((p->desc->qman_version & QMAN_REV_MASK) >= QMAN_REV_5000)
-+		reg = qbman_set_swp_cfg(p->dqrr.dqrr_size,
-+			0, /* Writes Non-cacheable */
-+			0, /* EQCR_CI stashing threshold */
-+			3, /* RPM: RCR in array mode */
-+			2, /* DCM: Discrete consumption ack */
-+			2, /* EPM: EQCR in ring mode */
-+			1, /* mem stashing drop enable enable */
-+			1, /* mem stashing priority enable */
-+			1, /* mem stashing enable */
-+			1, /* dequeue stashing priority enable */
-+			0, /* dequeue stashing enable enable */
-+			0); /* EQCR_CI stashing priority enable */
-+	} else {
-+		memset(p->addr_cena, 0, 64 * 1024);
-+		reg = qbman_set_swp_cfg(p->dqrr.dqrr_size,
-+			0, /* Writes Non-cacheable */
-+			1, /* EQCR_CI stashing threshold */
-+			3, /* RPM: RCR in array mode */
-+			2, /* DCM: Discrete consumption ack */
-+			0, /* EPM: EQCR in ring mode */
-+			1, /* mem stashing drop enable */
-+			1, /* mem stashing priority enable */
-+			1, /* mem stashing enable */
-+			1, /* dequeue stashing priority enable */
-+			0, /* dequeue stashing enable */
-+			0); /* EQCR_CI stashing priority enable */
- 		reg |= 1 << SWP_CFG_CPBS_SHIFT | /* memory-backed mode */
- 		       1 << SWP_CFG_VPM_SHIFT |  /* VDQCR read triggered mode */
- 		       1 << SWP_CFG_CPM_SHIFT;   /* CR read triggered mode */
-+	}
- 
- 	qbman_write_register(p, QBMAN_CINH_SWP_CFG, reg);
- 	reg = qbman_read_register(p, QBMAN_CINH_SWP_CFG);
-@@ -304,7 +340,9 @@ struct qbman_swp *qbman_swp_init(const s
- 	 */
- 	qbman_write_register(p, QBMAN_CINH_SWP_SDQCR, 0);
- 
-+	p->eqcr.pi_ring_size = 8;
- 	if ((p->desc->qman_version & QMAN_REV_MASK) >= QMAN_REV_5000) {
-+		p->eqcr.pi_ring_size = 32;
- 		qbman_swp_enqueue_ptr =
- 			qbman_swp_enqueue_mem_back;
- 		qbman_swp_enqueue_multiple_ptr =
-@@ -316,6 +354,15 @@ struct qbman_swp *qbman_swp_init(const s
- 		qbman_swp_release_ptr = qbman_swp_release_mem_back;
- 	}
- 
-+	for (mask_size = p->eqcr.pi_ring_size; mask_size > 0; mask_size >>= 1)
-+		p->eqcr.pi_ci_mask = (p->eqcr.pi_ci_mask << 1) + 1;
-+	eqcr_pi = qbman_read_register(p, QBMAN_CINH_SWP_EQCR_PI);
-+	p->eqcr.pi = eqcr_pi & p->eqcr.pi_ci_mask;
-+	p->eqcr.pi_vb = eqcr_pi & QB_VALID_BIT;
-+	p->eqcr.ci = qbman_read_register(p, QBMAN_CINH_SWP_EQCR_CI)
-+			& p->eqcr.pi_ci_mask;
-+	p->eqcr.available = p->eqcr.pi_ring_size;
-+
- 	return p;
- }
- 
-@@ -468,8 +515,9 @@ enum qb_enqueue_commands {
- 	enqueue_rejects_to_fq = 2
- };
- 
--#define QB_ENQUEUE_CMD_ORP_ENABLE_SHIFT      2
--#define QB_ENQUEUE_CMD_TARGET_TYPE_SHIFT     4
-+#define QB_ENQUEUE_CMD_ORP_ENABLE_SHIFT         2
-+#define QB_ENQUEUE_CMD_TARGET_TYPE_SHIFT        4
-+#define QB_ENQUEUE_CMD_DCA_EN_SHIFT             7
- 
- /**
-  * qbman_eq_desc_clear() - Clear the contents of a descriptor to
-@@ -582,6 +630,7 @@ static inline void qbman_write_eqcr_am_r
- 				     QMAN_RT_MODE);
- }
- 
-+#define QB_RT_BIT ((u32)0x100)
- /**
-  * qbman_swp_enqueue_direct() - Issue an enqueue command
-  * @s:  the software portal used for enqueue
-@@ -593,35 +642,19 @@ static inline void qbman_write_eqcr_am_r
-  *
-  * Return 0 for successful enqueue, -EBUSY if the EQCR is not ready.
-  */
--int qbman_swp_enqueue_direct(struct qbman_swp *s, const struct qbman_eq_desc *d,
--		      const struct dpaa2_fd *fd)
-+static
-+int qbman_swp_enqueue_direct(struct qbman_swp *s,
-+			     const struct qbman_eq_desc *d,
-+			     const struct dpaa2_fd *fd)
- {
--	struct qbman_eq_desc_with_fd *p;
--	u32 eqar = qbman_read_register(s, QBMAN_CINH_SWP_EQAR);
--
--	if (!EQAR_SUCCESS(eqar))
--		return -EBUSY;
-+	int flags = 0;
-+	int ret = qbman_swp_enqueue_multiple_direct(s, d, fd, &flags, 1);
- 
--	p = qbman_get_cmd(s, QBMAN_CENA_SWP_EQCR(EQAR_IDX(eqar)));
--	/* This is mapped as DEVICE type memory, writes are
--	 * with address alignment:
--	 * desc.dca address alignment = 1
--	 * desc.seqnum address alignment = 2
--	 * desc.orpid address alignment = 4
--	 * desc.tgtid address alignment = 8
--	 */
--	p->desc.dca = d->dca;
--	p->desc.seqnum = d->seqnum;
--	p->desc.orpid = d->orpid;
--	memcpy(&p->desc.tgtid, &d->tgtid, 24);
--	memcpy(&p->fd, fd, sizeof(*fd));
--
--	/* Set the verb byte, have to substitute in the valid-bit */
--	dma_wmb();
--	p->desc.verb = d->verb | EQAR_VB(eqar);
--	dccvac(p);
--
--	return 0;
-+	if (ret >= 0)
-+		ret = 0;
-+	else
-+		ret = -EBUSY;
-+	return  ret;
- }
- 
- /**
-@@ -635,35 +668,19 @@ int qbman_swp_enqueue_direct(struct qbma
-  *
-  * Return 0 for successful enqueue, -EBUSY if the EQCR is not ready.
-  */
-+static
- int qbman_swp_enqueue_mem_back(struct qbman_swp *s,
- 			       const struct qbman_eq_desc *d,
- 			       const struct dpaa2_fd *fd)
- {
--	struct qbman_eq_desc_with_fd *p;
--	u32 eqar = qbman_read_register(s, QBMAN_CINH_SWP_EQAR);
--
--	if (!EQAR_SUCCESS(eqar))
--		return -EBUSY;
--
--	p = qbman_get_cmd(s, QBMAN_CENA_SWP_EQCR(EQAR_IDX(eqar)));
--	/* This is mapped as DEVICE type memory, writes are
--	 * with address alignment:
--	 * desc.dca address alignment = 1
--	 * desc.seqnum address alignment = 2
--	 * desc.orpid address alignment = 4
--	 * desc.tgtid address alignment = 8
--	 */
--	p->desc.dca = d->dca;
--	p->desc.seqnum = d->seqnum;
--	p->desc.orpid = d->orpid;
--	memcpy(&p->desc.tgtid, &d->tgtid, 24);
--	memcpy(&p->fd, fd, sizeof(*fd));
--
--	p->desc.verb = d->verb | EQAR_VB(eqar);
--	dma_wmb();
--	qbman_write_eqcr_am_rt_register(s, EQAR_IDX(eqar));
-+	int flags = 0;
-+	int ret = qbman_swp_enqueue_multiple_mem_back(s, d, fd, &flags, 1);
- 
--	return 0;
-+	if (ret >= 0)
-+		ret = 0;
-+	else
-+		ret = -EBUSY;
-+	return  ret;
- }
- 
- /**
-@@ -672,26 +689,84 @@ int qbman_swp_enqueue_mem_back(struct qb
-  * @s:  the software portal used for enqueue
-  * @d:  the enqueue descriptor
-  * @fd: table pointer of frame descriptor table to be enqueued
-- * @flags: table pointer of flags, not used for the moment
-+ * @flags: table pointer of QBMAN_ENQUEUE_FLAG_DCA flags, not used if NULL
-  * @num_frames: number of fd to be enqueued
-  *
-  * Return the number of fd enqueued, or a negative error number.
-  */
-+static
- int qbman_swp_enqueue_multiple_direct(struct qbman_swp *s,
- 				      const struct qbman_eq_desc *d,
- 				      const struct dpaa2_fd *fd,
- 				      uint32_t *flags,
- 				      int num_frames)
- {
--	int count = 0;
-+	uint32_t *p = NULL;
-+	const uint32_t *cl = (uint32_t *)d;
-+	uint32_t eqcr_ci, eqcr_pi, half_mask, full_mask;
-+	int i, num_enqueued = 0;
-+	uint64_t addr_cena;
-+
-+	spin_lock(&s->access_spinlock);
-+	half_mask = (s->eqcr.pi_ci_mask>>1);
-+	full_mask = s->eqcr.pi_ci_mask;
-+
-+	if (!s->eqcr.available) {
-+		eqcr_ci = s->eqcr.ci;
-+		p = s->addr_cena + QBMAN_CENA_SWP_EQCR_CI;
-+		s->eqcr.ci = qbman_read_register(s, QBMAN_CINH_SWP_EQCR_CI);
-+
-+		s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
-+					eqcr_ci, s->eqcr.ci);
-+		if (!s->eqcr.available) {
-+			spin_unlock(&s->access_spinlock);
-+			return 0;
-+		}
-+	}
- 
--	while (count < num_frames) {
--		if (qbman_swp_enqueue_direct(s, d, fd) != 0)
--			break;
--		count++;
-+	eqcr_pi = s->eqcr.pi;
-+	num_enqueued = (s->eqcr.available < num_frames) ?
-+			s->eqcr.available : num_frames;
-+	s->eqcr.available -= num_enqueued;
-+	/* Fill in the EQCR ring */
-+	for (i = 0; i < num_enqueued; i++) {
-+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
-+		/* Skip copying the verb */
-+		memcpy(&p[1], &cl[1], EQ_DESC_SIZE_WITHOUT_FD - 1);
-+		memcpy(&p[EQ_DESC_SIZE_FD_START/sizeof(uint32_t)],
-+		       &fd[i], sizeof(*fd));
-+		eqcr_pi++;
- 	}
- 
--	return count;
-+	dma_wmb();
-+
-+	/* Set the verb byte, have to substitute in the valid-bit */
-+	eqcr_pi = s->eqcr.pi;
-+	for (i = 0; i < num_enqueued; i++) {
-+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
-+		p[0] = cl[0] | s->eqcr.pi_vb;
-+		if (flags && (flags[i] & QBMAN_ENQUEUE_FLAG_DCA)) {
-+			struct qbman_eq_desc *d = (struct qbman_eq_desc *)p;
-+
-+			d->dca = (1 << QB_ENQUEUE_CMD_DCA_EN_SHIFT) |
-+				((flags[i]) & QBMAN_EQCR_DCA_IDXMASK);
-+		}
-+		eqcr_pi++;
-+		if (!(eqcr_pi & half_mask))
-+			s->eqcr.pi_vb ^= QB_VALID_BIT;
-+	}
-+
-+	/* Flush all the cacheline without load/store in between */
-+	eqcr_pi = s->eqcr.pi;
-+	addr_cena = (size_t)s->addr_cena;
-+	for (i = 0; i < num_enqueued; i++) {
-+		dccvac((addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask)));
-+		eqcr_pi++;
-+	}
-+	s->eqcr.pi = eqcr_pi & full_mask;
-+	spin_unlock(&s->access_spinlock);
-+
-+	return num_enqueued;
- }
- 
- /**
-@@ -700,26 +775,80 @@ int qbman_swp_enqueue_multiple_direct(st
-  * @s:  the software portal used for enqueue
-  * @d:  the enqueue descriptor
-  * @fd: table pointer of frame descriptor table to be enqueued
-- * @flags: table pointer of flags, not used for the moment
-+ * @flags: table pointer of QBMAN_ENQUEUE_FLAG_DCA flags, not used if NULL
-  * @num_frames: number of fd to be enqueued
-  *
-  * Return the number of fd enqueued, or a negative error number.
-  */
-+static
- int qbman_swp_enqueue_multiple_mem_back(struct qbman_swp *s,
--				      const struct qbman_eq_desc *d,
--				      const struct dpaa2_fd *fd,
--				      uint32_t *flags,
--				      int num_frames)
--{
--	int count = 0;
-+					const struct qbman_eq_desc *d,
-+					const struct dpaa2_fd *fd,
-+					uint32_t *flags,
-+					int num_frames)
-+{
-+	uint32_t *p = NULL;
-+	const uint32_t *cl = (uint32_t *)(d);
-+	uint32_t eqcr_ci, eqcr_pi, half_mask, full_mask;
-+	int i, num_enqueued = 0;
-+	unsigned long irq_flags;
-+
-+	spin_lock(&s->access_spinlock);
-+	local_irq_save(irq_flags);
-+
-+	half_mask = (s->eqcr.pi_ci_mask>>1);
-+	full_mask = s->eqcr.pi_ci_mask;
-+	if (!s->eqcr.available) {
-+		eqcr_ci = s->eqcr.ci;
-+		p = s->addr_cena + QBMAN_CENA_SWP_EQCR_CI_MEMBACK;
-+		s->eqcr.ci = __raw_readl(p) & full_mask;
-+		s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
-+					eqcr_ci, s->eqcr.ci);
-+		if (!s->eqcr.available) {
-+			local_irq_restore(irq_flags);
-+			spin_unlock(&s->access_spinlock);
-+			return 0;
-+		}
-+	}
-+
-+	eqcr_pi = s->eqcr.pi;
-+	num_enqueued = (s->eqcr.available < num_frames) ?
-+			s->eqcr.available : num_frames;
-+	s->eqcr.available -= num_enqueued;
-+	/* Fill in the EQCR ring */
-+	for (i = 0; i < num_enqueued; i++) {
-+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
-+		/* Skip copying the verb */
-+		memcpy(&p[1], &cl[1], EQ_DESC_SIZE_WITHOUT_FD - 1);
-+		memcpy(&p[EQ_DESC_SIZE_FD_START/sizeof(uint32_t)],
-+		       &fd[i], sizeof(*fd));
-+		eqcr_pi++;
-+	}
- 
--	while (count < num_frames) {
--		if (qbman_swp_enqueue_mem_back(s, d, fd) != 0)
--			break;
--		count++;
-+	/* Set the verb byte, have to substitute in the valid-bit */
-+	eqcr_pi = s->eqcr.pi;
-+	for (i = 0; i < num_enqueued; i++) {
-+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
-+		p[0] = cl[0] | s->eqcr.pi_vb;
-+		if (flags && (flags[i] & QBMAN_ENQUEUE_FLAG_DCA)) {
-+			struct qbman_eq_desc *d = (struct qbman_eq_desc *)p;
-+
-+			d->dca = (1 << QB_ENQUEUE_CMD_DCA_EN_SHIFT) |
-+				((flags[i]) & QBMAN_EQCR_DCA_IDXMASK);
-+		}
-+		eqcr_pi++;
-+		if (!(eqcr_pi & half_mask))
-+			s->eqcr.pi_vb ^= QB_VALID_BIT;
- 	}
-+	s->eqcr.pi = eqcr_pi & full_mask;
-+
-+	dma_wmb();
-+	qbman_write_register(s, QBMAN_CINH_SWP_EQCR_PI,
-+				(QB_RT_BIT)|(s->eqcr.pi)|s->eqcr.pi_vb);
-+	local_irq_restore(irq_flags);
-+	spin_unlock(&s->access_spinlock);
- 
--	return count;
-+	return num_enqueued;
- }
- 
- /**
-@@ -732,20 +861,69 @@ int qbman_swp_enqueue_multiple_mem_back(
-  *
-  * Return the number of fd enqueued, or a negative error number.
-  */
-+static
- int qbman_swp_enqueue_multiple_desc_direct(struct qbman_swp *s,
- 					   const struct qbman_eq_desc *d,
- 					   const struct dpaa2_fd *fd,
- 					   int num_frames)
- {
--	int count = 0;
-+	uint32_t *p;
-+	const uint32_t *cl;
-+	uint32_t eqcr_ci, eqcr_pi, half_mask, full_mask;
-+	int i, num_enqueued = 0;
-+	uint64_t addr_cena;
-+
-+	half_mask = (s->eqcr.pi_ci_mask>>1);
-+	full_mask = s->eqcr.pi_ci_mask;
-+	if (!s->eqcr.available) {
-+		eqcr_ci = s->eqcr.ci;
-+		p = s->addr_cena + QBMAN_CENA_SWP_EQCR_CI;
-+		s->eqcr.ci = qbman_read_register(s, QBMAN_CINH_SWP_EQCR_CI);
-+		s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
-+					eqcr_ci, s->eqcr.ci);
-+		if (!s->eqcr.available)
-+			return 0;
-+	}
- 
--	while (count < num_frames) {
--		if (qbman_swp_enqueue_direct(s, &(d[count]), fd) != 0)
--			break;
--		count++;
-+	eqcr_pi = s->eqcr.pi;
-+	num_enqueued = (s->eqcr.available < num_frames) ?
-+			s->eqcr.available : num_frames;
-+	s->eqcr.available -= num_enqueued;
-+	/* Fill in the EQCR ring */
-+	for (i = 0; i < num_enqueued; i++) {
-+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
-+		cl = (uint32_t *)(&d[i]);
-+		/* Skip copying the verb */
-+		memcpy(&p[1], &cl[1], EQ_DESC_SIZE_WITHOUT_FD - 1);
-+		memcpy(&p[EQ_DESC_SIZE_FD_START/sizeof(uint32_t)],
-+		       &fd[i], sizeof(*fd));
-+		eqcr_pi++;
- 	}
- 
--	return count;
-+	dma_wmb();
-+
-+	/* Set the verb byte, have to substitute in the valid-bit */
-+	eqcr_pi = s->eqcr.pi;
-+	for (i = 0; i < num_enqueued; i++) {
-+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
-+		cl = (uint32_t *)(&d[i]);
-+		p[0] = cl[0] | s->eqcr.pi_vb;
-+		eqcr_pi++;
-+		if (!(eqcr_pi & half_mask))
-+			s->eqcr.pi_vb ^= QB_VALID_BIT;
-+	}
-+
-+	/* Flush all the cacheline without load/store in between */
-+	eqcr_pi = s->eqcr.pi;
-+	addr_cena = (uint64_t)s->addr_cena;
-+	for (i = 0; i < num_enqueued; i++) {
-+		dccvac((uint64_t *)(addr_cena +
-+			QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask)));
-+		eqcr_pi++;
-+	}
-+	s->eqcr.pi = eqcr_pi & full_mask;
-+
-+	return num_enqueued;
- }
- 
- /**
-@@ -758,20 +936,62 @@ int qbman_swp_enqueue_multiple_desc_dire
-  *
-  * Return the number of fd enqueued, or a negative error number.
-  */
-+static
- int qbman_swp_enqueue_multiple_desc_mem_back(struct qbman_swp *s,
- 					   const struct qbman_eq_desc *d,
- 					   const struct dpaa2_fd *fd,
- 					   int num_frames)
- {
--	int count = 0;
-+	uint32_t *p;
-+	const uint32_t *cl;
-+	uint32_t eqcr_ci, eqcr_pi, half_mask, full_mask;
-+	int i, num_enqueued = 0;
-+
-+	half_mask = (s->eqcr.pi_ci_mask>>1);
-+	full_mask = s->eqcr.pi_ci_mask;
-+	if (!s->eqcr.available) {
-+		eqcr_ci = s->eqcr.ci;
-+		p = s->addr_cena + QBMAN_CENA_SWP_EQCR_CI_MEMBACK;
-+		s->eqcr.ci = __raw_readl(p) & full_mask;
-+		s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
-+					eqcr_ci, s->eqcr.ci);
-+		if (!s->eqcr.available)
-+			return 0;
-+	}
- 
--	while (count < num_frames) {
--		if (qbman_swp_enqueue_mem_back(s, &(d[count]), fd) != 0)
--			break;
--		count++;
-+	eqcr_pi = s->eqcr.pi;
-+	num_enqueued = (s->eqcr.available < num_frames) ?
-+			s->eqcr.available : num_frames;
-+	s->eqcr.available -= num_enqueued;
-+	/* Fill in the EQCR ring */
-+	for (i = 0; i < num_enqueued; i++) {
-+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
-+		cl = (uint32_t *)(&d[i]);
-+		/* Skip copying the verb */
-+		memcpy(&p[1], &cl[1], EQ_DESC_SIZE_WITHOUT_FD - 1);
-+		memcpy(&p[EQ_DESC_SIZE_FD_START/sizeof(uint32_t)],
-+		       &fd[i], sizeof(*fd));
-+		eqcr_pi++;
- 	}
- 
--	return count;
-+	/* Set the verb byte, have to substitute in the valid-bit */
-+	eqcr_pi = s->eqcr.pi;
-+	for (i = 0; i < num_enqueued; i++) {
-+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
-+		cl = (uint32_t *)(&d[i]);
-+		p[0] = cl[0] | s->eqcr.pi_vb;
-+		eqcr_pi++;
-+		if (!(eqcr_pi & half_mask))
-+			s->eqcr.pi_vb ^= QB_VALID_BIT;
-+	}
-+
-+	s->eqcr.pi = eqcr_pi & full_mask;
-+
-+	dma_wmb();
-+	qbman_write_register(s, QBMAN_CINH_SWP_EQCR_PI,
-+				(QB_RT_BIT)|(s->eqcr.pi)|s->eqcr.pi_vb);
-+
-+	return num_enqueued;
- }
- 
- /* Static (push) dequeue */
-@@ -937,6 +1157,7 @@ void qbman_pull_desc_set_channel(struct
-  * Return 0 for success, and -EBUSY if the software portal is not ready
-  * to do pull dequeue.
-  */
-+static
- int qbman_swp_pull_direct(struct qbman_swp *s, struct qbman_pull_desc *d)
- {
- 	struct qbman_pull_desc *p;
-@@ -973,6 +1194,7 @@ int qbman_swp_pull_direct(struct qbman_s
-  * Return 0 for success, and -EBUSY if the software portal is not ready
-  * to do pull dequeue.
-  */
-+static
- int qbman_swp_pull_mem_back(struct qbman_swp *s, struct qbman_pull_desc *d)
- {
- 	struct qbman_pull_desc *p;
-@@ -991,6 +1213,8 @@ int qbman_swp_pull_mem_back(struct qbman
- 	p->dq_src = d->dq_src;
- 	p->rsp_addr = d->rsp_addr;
- 	p->rsp_addr_virt = d->rsp_addr_virt;
-+
-+	/* Set the verb byte, have to substitute in the valid-bit */
- 	p->verb = d->verb | s->vdq.valid_bit;
- 	s->vdq.valid_bit ^= QB_VALID_BIT;
- 	dma_wmb();
---- a/drivers/soc/fsl/dpio/qbman-portal.h
-+++ b/drivers/soc/fsl/dpio/qbman-portal.h
-@@ -143,6 +143,19 @@ struct qbman_swp {
- 		u8 dqrr_size;
- 		int reset_bug; /* indicates dqrr reset workaround is needed */
- 	} dqrr;
-+
-+	struct {
-+		u32 pi;
-+		u32 pi_vb;
-+		u32 pi_ring_size;
-+		u32 pi_ci_mask;
-+		u32 ci;
-+		int available;
-+		u32 pend;
-+		u32 no_pfdr;
-+	} eqcr;
-+
-+	spinlock_t access_spinlock;
- };
- 
- /* Function pointers */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0224-bus-fsl-mc-add-autorescan-sysfs.patch b/target/linux/layerscape/patches-5.4/701-net-0224-bus-fsl-mc-add-autorescan-sysfs.patch
deleted file mode 100644
index 6128e7d0b4..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0224-bus-fsl-mc-add-autorescan-sysfs.patch
+++ /dev/null
@@ -1,157 +0,0 @@
-From 02e92b21edb4df7285f27ea5f0403377dcabe22d Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Tue, 29 Oct 2019 22:48:55 +0200
-Subject: [PATCH] bus: fsl-mc: add autorescan sysfs
-
-Add the autorescan sysfs in order to enable/disable the DPRC IRQs on
-which automatic rescan of the bus is performed. This is important when
-dynamic creation of objects is needed to happen in a timely manner because
-object creation can be bundled together.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
----
- drivers/bus/fsl-mc/dprc-driver.c    | 17 ++++++++++--
- drivers/bus/fsl-mc/fsl-mc-bus.c     | 55 +++++++++++++++++++++++++++++++++++++
- drivers/bus/fsl-mc/fsl-mc-private.h |  4 +++
- include/linux/fsl/mc.h              |  1 +
- 4 files changed, 75 insertions(+), 2 deletions(-)
-
---- a/drivers/bus/fsl-mc/dprc-driver.c
-+++ b/drivers/bus/fsl-mc/dprc-driver.c
-@@ -484,8 +484,9 @@ out:
- /*
-  * Disable and clear interrupt for a given DPRC object
-  */
--static int disable_dprc_irq(struct fsl_mc_device *mc_dev)
-+int disable_dprc_irq(struct fsl_mc_device *mc_dev)
- {
-+	struct fsl_mc_bus *mc_bus = to_fsl_mc_bus(mc_dev);
- 	int error;
- 	struct fsl_mc_io *mc_io = mc_dev->mc_io;
- 
-@@ -522,9 +523,18 @@ static int disable_dprc_irq(struct fsl_m
- 		return error;
- 	}
- 
-+	mc_bus->irq_enabled = 0;
-+
- 	return 0;
- }
- 
-+int get_dprc_irq_state(struct fsl_mc_device *mc_dev)
-+{
-+	struct fsl_mc_bus *mc_bus = to_fsl_mc_bus(mc_dev);
-+
-+	return mc_bus->irq_enabled;
-+}
-+
- static int register_dprc_irq_handler(struct fsl_mc_device *mc_dev)
- {
- 	int error;
-@@ -551,8 +561,9 @@ static int register_dprc_irq_handler(str
- 	return 0;
- }
- 
--static int enable_dprc_irq(struct fsl_mc_device *mc_dev)
-+int enable_dprc_irq(struct fsl_mc_device *mc_dev)
- {
-+	struct fsl_mc_bus *mc_bus = to_fsl_mc_bus(mc_dev);
- 	int error;
- 
- 	/*
-@@ -580,6 +591,8 @@ static int enable_dprc_irq(struct fsl_mc
- 		return error;
- 	}
- 
-+	mc_bus->irq_enabled = 1;
-+
- 	return 0;
- }
- 
---- a/drivers/bus/fsl-mc/fsl-mc-bus.c
-+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
-@@ -237,8 +237,63 @@ static ssize_t rescan_store(struct bus_t
- }
- static BUS_ATTR_WO(rescan);
- 
-+static int fsl_mc_bus_set_autorescan(struct device *dev, void *data)
-+{
-+	struct fsl_mc_device *root_mc_dev;
-+	unsigned long val;
-+	char *buf = data;
-+
-+	if (!fsl_mc_is_root_dprc(dev))
-+		goto exit;
-+
-+	root_mc_dev = to_fsl_mc_device(dev);
-+
-+	if (kstrtoul(buf, 0, &val) < 0)
-+		return -EINVAL;
-+
-+	if (val)
-+		enable_dprc_irq(root_mc_dev);
-+	else
-+		disable_dprc_irq(root_mc_dev);
-+
-+exit:
-+	return 0;
-+}
-+
-+static int fsl_mc_bus_get_autorescan(struct device *dev, void *data)
-+{
-+	struct fsl_mc_device *root_mc_dev;
-+	char *buf = data;
-+
-+	if (!fsl_mc_is_root_dprc(dev))
-+		goto exit;
-+
-+	root_mc_dev = to_fsl_mc_device(dev);
-+
-+	sprintf(buf, "%d\n", get_dprc_irq_state(root_mc_dev));
-+exit:
-+	return 0;
-+}
-+
-+static ssize_t autorescan_store(struct bus_type *bus,
-+				const char *buf, size_t count)
-+{
-+	bus_for_each_dev(bus, NULL, (void *)buf, fsl_mc_bus_set_autorescan);
-+
-+	return count;
-+}
-+
-+static ssize_t autorescan_show(struct bus_type *bus, char *buf)
-+{
-+	bus_for_each_dev(bus, NULL, (void *)buf, fsl_mc_bus_get_autorescan);
-+	return strlen(buf);
-+}
-+
-+static BUS_ATTR_RW(autorescan);
-+
- static struct attribute *fsl_mc_bus_attrs[] = {
- 	&bus_attr_rescan.attr,
-+	&bus_attr_autorescan.attr,
- 	NULL,
- };
- 
---- a/drivers/bus/fsl-mc/fsl-mc-private.h
-+++ b/drivers/bus/fsl-mc/fsl-mc-private.h
-@@ -203,4 +203,8 @@ static inline void fsl_mc_uapi_remove_de
- 
- #endif
- 
-+int disable_dprc_irq(struct fsl_mc_device *mc_dev);
-+int enable_dprc_irq(struct fsl_mc_device *mc_dev);
-+int get_dprc_irq_state(struct fsl_mc_device *mc_dev);
-+
- #endif /* _FSL_MC_PRIVATE_H_ */
---- a/include/linux/fsl/mc.h
-+++ b/include/linux/fsl/mc.h
-@@ -1006,6 +1006,7 @@ struct fsl_mc_bus {
- 	struct mutex scan_mutex;    /* serializes bus scanning */
- 	struct dprc_attributes dprc_attr;
- 	struct fsl_mc_uapi uapi_misc;
-+	int irq_enabled;
- };
- 
- int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0225-enetc-Configure-the-Time-Aware-Scheduler-via-tc-tapr.patch b/target/linux/layerscape/patches-5.4/701-net-0225-enetc-Configure-the-Time-Aware-Scheduler-via-tc-tapr.patch
deleted file mode 100644
index e516e1d5b6..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0225-enetc-Configure-the-Time-Aware-Scheduler-via-tc-tapr.patch
+++ /dev/null
@@ -1,378 +0,0 @@
-From 6ee2331a3a5627b062daf76aa5ed9f64fbbfa303 Mon Sep 17 00:00:00 2001
-From: Po Liu <po.liu@nxp.com>
-Date: Fri, 15 Nov 2019 03:33:33 +0000
-Subject: [PATCH] enetc: Configure the Time-Aware Scheduler via tc-taprio
- offload
-
-ENETC supports in hardware for time-based egress shaping according
-to IEEE 802.1Qbv. This patch implement the Qbv enablement by the
-hardware offload method qdisc tc-taprio method.
-Also update cbdr writeback to up level since control bd ring may
-writeback data to control bd ring.
-
-Signed-off-by: Po Liu <Po.Liu@nxp.com>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/freescale/enetc/Kconfig      |  10 ++
- drivers/net/ethernet/freescale/enetc/Makefile     |   2 +
- drivers/net/ethernet/freescale/enetc/enetc.c      |  19 ++-
- drivers/net/ethernet/freescale/enetc/enetc.h      |   7 ++
- drivers/net/ethernet/freescale/enetc/enetc_cbdr.c |   5 +-
- drivers/net/ethernet/freescale/enetc/enetc_hw.h   |  84 ++++++++++---
- drivers/net/ethernet/freescale/enetc/enetc_qos.c  | 138 ++++++++++++++++++++++
- 7 files changed, 243 insertions(+), 22 deletions(-)
- create mode 100644 drivers/net/ethernet/freescale/enetc/enetc_qos.c
-
---- a/drivers/net/ethernet/freescale/enetc/Kconfig
-+++ b/drivers/net/ethernet/freescale/enetc/Kconfig
-@@ -50,3 +50,13 @@ config FSL_ENETC_HW_TIMESTAMPING
- 	  allocation has not been supported and it is too expensive to use
- 	  extended RX BDs if timestamping is not used, this option enables
- 	  extended RX BDs in order to support hardware timestamping.
-+
-+config FSL_ENETC_QOS
-+	bool "ENETC hardware Time-sensitive Network support"
-+	depends on (FSL_ENETC || FSL_ENETC_VF) && NET_SCH_TAPRIO
-+	help
-+	  There are Time-Sensitive Network(TSN) capabilities(802.1Qbv/802.1Qci
-+	  /802.1Qbu etc.) supported by ENETC. These TSN capabilities can be set
-+	  enable/disable from user space via Qos commands(tc). In the kernel
-+	  side, it can be loaded by Qos driver. Currently, it is only support
-+	  taprio(802.1Qbv).
---- a/drivers/net/ethernet/freescale/enetc/Makefile
-+++ b/drivers/net/ethernet/freescale/enetc/Makefile
-@@ -5,9 +5,11 @@ common-objs := enetc.o enetc_cbdr.o enet
- obj-$(CONFIG_FSL_ENETC) += fsl-enetc.o
- fsl-enetc-y := enetc_pf.o enetc_mdio.o $(common-objs)
- fsl-enetc-$(CONFIG_PCI_IOV) += enetc_msg.o
-+fsl-enetc-$(CONFIG_FSL_ENETC_QOS) += enetc_qos.o
- 
- obj-$(CONFIG_FSL_ENETC_VF) += fsl-enetc-vf.o
- fsl-enetc-vf-y := enetc_vf.o $(common-objs)
-+fsl-enetc-vf-$(CONFIG_FSL_ENETC_QOS) += enetc_qos.o
- 
- obj-$(CONFIG_FSL_ENETC_MDIO) += fsl-enetc-mdio.o
- fsl-enetc-mdio-y := enetc_pci_mdio.o enetc_mdio.o
---- a/drivers/net/ethernet/freescale/enetc/enetc.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
-@@ -1419,8 +1419,7 @@ int enetc_close(struct net_device *ndev)
- 	return 0;
- }
- 
--int enetc_setup_tc(struct net_device *ndev, enum tc_setup_type type,
--		   void *type_data)
-+int enetc_setup_tc_mqprio(struct net_device *ndev, void *type_data)
- {
- 	struct enetc_ndev_priv *priv = netdev_priv(ndev);
- 	struct tc_mqprio_qopt *mqprio = type_data;
-@@ -1428,9 +1427,6 @@ int enetc_setup_tc(struct net_device *nd
- 	u8 num_tc;
- 	int i;
- 
--	if (type != TC_SETUP_QDISC_MQPRIO)
--		return -EOPNOTSUPP;
--
- 	mqprio->hw = TC_MQPRIO_HW_OFFLOAD_TCS;
- 	num_tc = mqprio->num_tc;
- 
-@@ -1475,6 +1471,19 @@ int enetc_setup_tc(struct net_device *nd
- 	return 0;
- }
- 
-+int enetc_setup_tc(struct net_device *ndev, enum tc_setup_type type,
-+		   void *type_data)
-+{
-+	switch (type) {
-+	case TC_SETUP_QDISC_MQPRIO:
-+		return enetc_setup_tc_mqprio(ndev, type_data);
-+	case TC_SETUP_QDISC_TAPRIO:
-+		return enetc_setup_tc_taprio(ndev, type_data);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
- struct net_device_stats *enetc_get_stats(struct net_device *ndev)
- {
- 	struct enetc_ndev_priv *priv = netdev_priv(ndev);
---- a/drivers/net/ethernet/freescale/enetc/enetc.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc.h
-@@ -249,3 +249,10 @@ int enetc_set_fs_entry(struct enetc_si *
- void enetc_set_rss_key(struct enetc_hw *hw, const u8 *bytes);
- int enetc_get_rss_table(struct enetc_si *si, u32 *table, int count);
- int enetc_set_rss_table(struct enetc_si *si, const u32 *table, int count);
-+int enetc_send_cmd(struct enetc_si *si, struct enetc_cbd *cbd);
-+
-+#ifdef CONFIG_FSL_ENETC_QOS
-+int enetc_setup_tc_taprio(struct net_device *ndev, void *type_data);
-+#else
-+#define enetc_setup_tc_taprio(ndev, type_data) -EOPNOTSUPP
-+#endif
---- a/drivers/net/ethernet/freescale/enetc/enetc_cbdr.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_cbdr.c
-@@ -32,7 +32,7 @@ static int enetc_cbd_unused(struct enetc
- 		r->bd_count;
- }
- 
--static int enetc_send_cmd(struct enetc_si *si, struct enetc_cbd *cbd)
-+int enetc_send_cmd(struct enetc_si *si, struct enetc_cbd *cbd)
- {
- 	struct enetc_cbdr *ring = &si->cbd_ring;
- 	int timeout = ENETC_CBDR_TIMEOUT;
-@@ -66,6 +66,9 @@ static int enetc_send_cmd(struct enetc_s
- 	if (!timeout)
- 		return -EBUSY;
- 
-+	/* CBD may writeback data, feedback up level */
-+	*cbd = *dest_cbd;
-+
- 	enetc_clean_cbdr(si);
- 
- 	return 0;
---- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-@@ -18,6 +18,7 @@
- #define ENETC_SICTR0	0x18
- #define ENETC_SICTR1	0x1c
- #define ENETC_SIPCAPR0	0x20
-+#define ENETC_SIPCAPR0_QBV	BIT(4)
- #define ENETC_SIPCAPR0_RSS	BIT(8)
- #define ENETC_SIPCAPR1	0x24
- #define ENETC_SITGTGR	0x30
-@@ -446,22 +447,6 @@ union enetc_rx_bd {
- #define EMETC_MAC_ADDR_FILT_RES	3 /* # of reserved entries at the beginning */
- #define ENETC_MAX_NUM_VFS	2
- 
--struct enetc_cbd {
--	union {
--		struct {
--			__le32 addr[2];
--			__le32 opt[4];
--		};
--		__le32 data[6];
--	};
--	__le16 index;
--	__le16 length;
--	u8 cmd;
--	u8 cls;
--	u8 _res;
--	u8 status_flags;
--};
--
- #define ENETC_CBD_FLAGS_SF	BIT(7) /* short format */
- #define ENETC_CBD_STATUS_MASK	0xf
- 
-@@ -560,3 +545,70 @@ static inline void enetc_set_bdr_prio(st
- 	val |= ENETC_TBMR_SET_PRIO(prio);
- 	enetc_txbdr_wr(hw, bdr_idx, ENETC_TBMR, val);
- }
-+
-+enum bdcr_cmd_class {
-+	BDCR_CMD_UNSPEC = 0,
-+	BDCR_CMD_MAC_FILTER,
-+	BDCR_CMD_VLAN_FILTER,
-+	BDCR_CMD_RSS,
-+	BDCR_CMD_RFS,
-+	BDCR_CMD_PORT_GCL,
-+	BDCR_CMD_RECV_CLASSIFIER,
-+	__BDCR_CMD_MAX_LEN,
-+	BDCR_CMD_MAX_LEN = __BDCR_CMD_MAX_LEN - 1,
-+};
-+
-+/* class 5, command 0 */
-+struct tgs_gcl_conf {
-+	u8	atc;	/* init gate value */
-+	u8	res[7];
-+	struct {
-+		u8	res1[4];
-+		__le16	acl_len;
-+		u8	res2[2];
-+	};
-+};
-+
-+/* gate control list entry */
-+struct gce {
-+	__le32	period;
-+	u8	gate;
-+	u8	res[3];
-+};
-+
-+/* tgs_gcl_conf address point to this data space */
-+struct tgs_gcl_data {
-+	__le32		btl;
-+	__le32		bth;
-+	__le32		ct;
-+	__le32		cte;
-+	struct gce	entry[0];
-+};
-+
-+struct enetc_cbd {
-+	union{
-+		struct {
-+			__le32	addr[2];
-+			union {
-+				__le32	opt[4];
-+				struct tgs_gcl_conf	gcl_conf;
-+			};
-+		};	/* Long format */
-+		__le32 data[6];
-+	};
-+	__le16 index;
-+	__le16 length;
-+	u8 cmd;
-+	u8 cls;
-+	u8 _res;
-+	u8 status_flags;
-+};
-+
-+/* port time gating control register */
-+#define ENETC_QBV_PTGCR_OFFSET		0x11a00
-+#define ENETC_QBV_TGE			BIT(31)
-+#define ENETC_QBV_TGPE			BIT(30)
-+
-+/* Port time gating capability register */
-+#define ENETC_QBV_PTGCAPR_OFFSET	0x11a08
-+#define ENETC_QBV_MAX_GCL_LEN_MASK	GENMASK(15, 0)
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
-@@ -0,0 +1,138 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-+/* Copyright 2019 NXP */
-+
-+#include "enetc.h"
-+
-+#include <net/pkt_sched.h>
-+
-+static u16 enetc_get_max_gcl_len(struct enetc_hw *hw)
-+{
-+	return enetc_rd(hw, ENETC_QBV_PTGCAPR_OFFSET)
-+		& ENETC_QBV_MAX_GCL_LEN_MASK;
-+}
-+
-+static int enetc_setup_taprio(struct net_device *ndev,
-+			      struct tc_taprio_qopt_offload *admin_conf)
-+{
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	struct enetc_cbd cbd = {.cmd = 0};
-+	struct tgs_gcl_conf *gcl_config;
-+	struct tgs_gcl_data *gcl_data;
-+	struct gce *gce;
-+	dma_addr_t dma;
-+	u16 data_size;
-+	u16 gcl_len;
-+	u32 tge;
-+	int err;
-+	int i;
-+
-+	if (admin_conf->num_entries > enetc_get_max_gcl_len(&priv->si->hw))
-+		return -EINVAL;
-+	gcl_len = admin_conf->num_entries;
-+
-+	tge = enetc_rd(&priv->si->hw, ENETC_QBV_PTGCR_OFFSET);
-+	if (!admin_conf->enable) {
-+		enetc_wr(&priv->si->hw,
-+			 ENETC_QBV_PTGCR_OFFSET,
-+			 tge & (~ENETC_QBV_TGE));
-+		return 0;
-+	}
-+
-+	if (admin_conf->cycle_time > U32_MAX ||
-+	    admin_conf->cycle_time_extension > U32_MAX)
-+		return -EINVAL;
-+
-+	/* Configure the (administrative) gate control list using the
-+	 * control BD descriptor.
-+	 */
-+	gcl_config = &cbd.gcl_conf;
-+
-+	data_size = struct_size(gcl_data, entry, gcl_len);
-+	gcl_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
-+	if (!gcl_data)
-+		return -ENOMEM;
-+
-+	gce = (struct gce *)(gcl_data + 1);
-+
-+	/* Set all gates open as default */
-+	gcl_config->atc = 0xff;
-+	gcl_config->acl_len = cpu_to_le16(gcl_len);
-+
-+	if (!admin_conf->base_time) {
-+		gcl_data->btl =
-+			cpu_to_le32(enetc_rd(&priv->si->hw, ENETC_SICTR0));
-+		gcl_data->bth =
-+			cpu_to_le32(enetc_rd(&priv->si->hw, ENETC_SICTR1));
-+	} else {
-+		gcl_data->btl =
-+			cpu_to_le32(lower_32_bits(admin_conf->base_time));
-+		gcl_data->bth =
-+			cpu_to_le32(upper_32_bits(admin_conf->base_time));
-+	}
-+
-+	gcl_data->ct = cpu_to_le32(admin_conf->cycle_time);
-+	gcl_data->cte = cpu_to_le32(admin_conf->cycle_time_extension);
-+
-+	for (i = 0; i < gcl_len; i++) {
-+		struct tc_taprio_sched_entry *temp_entry;
-+		struct gce *temp_gce = gce + i;
-+
-+		temp_entry = &admin_conf->entries[i];
-+
-+		temp_gce->gate = (u8)temp_entry->gate_mask;
-+		temp_gce->period = cpu_to_le32(temp_entry->interval);
-+	}
-+
-+	cbd.length = cpu_to_le16(data_size);
-+	cbd.status_flags = 0;
-+
-+	dma = dma_map_single(&priv->si->pdev->dev, gcl_data,
-+			     data_size, DMA_TO_DEVICE);
-+	if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
-+		netdev_err(priv->si->ndev, "DMA mapping failed!\n");
-+		kfree(gcl_data);
-+		return -ENOMEM;
-+	}
-+
-+	cbd.addr[0] = lower_32_bits(dma);
-+	cbd.addr[1] = upper_32_bits(dma);
-+	cbd.cls = BDCR_CMD_PORT_GCL;
-+	cbd.status_flags = 0;
-+
-+	enetc_wr(&priv->si->hw, ENETC_QBV_PTGCR_OFFSET,
-+		 tge | ENETC_QBV_TGE);
-+
-+	err = enetc_send_cmd(priv->si, &cbd);
-+	if (err)
-+		enetc_wr(&priv->si->hw,
-+			 ENETC_QBV_PTGCR_OFFSET,
-+			 tge & (~ENETC_QBV_TGE));
-+
-+	dma_unmap_single(&priv->si->pdev->dev, dma, data_size, DMA_TO_DEVICE);
-+	kfree(gcl_data);
-+
-+	return err;
-+}
-+
-+int enetc_setup_tc_taprio(struct net_device *ndev, void *type_data)
-+{
-+	struct tc_taprio_qopt_offload *taprio = type_data;
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	int err;
-+	int i;
-+
-+	for (i = 0; i < priv->num_tx_rings; i++)
-+		enetc_set_bdr_prio(&priv->si->hw,
-+				   priv->tx_ring[i]->index,
-+				   taprio->enable ? i : 0);
-+
-+	err = enetc_setup_taprio(ndev, taprio);
-+
-+	if (err)
-+		for (i = 0; i < priv->num_tx_rings; i++)
-+			enetc_set_bdr_prio(&priv->si->hw,
-+					   priv->tx_ring[i]->index,
-+					   taprio->enable ? 0 : i);
-+
-+	return err;
-+}
diff --git a/target/linux/layerscape/patches-5.4/701-net-0226-enetc-update-TSN-Qbv-PSPEED-set-according-to-adjust-.patch b/target/linux/layerscape/patches-5.4/701-net-0226-enetc-update-TSN-Qbv-PSPEED-set-according-to-adjust-.patch
deleted file mode 100644
index b2f229e002..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0226-enetc-update-TSN-Qbv-PSPEED-set-according-to-adjust-.patch
+++ /dev/null
@@ -1,171 +0,0 @@
-From 877119a3f6bce2d9091faa4e51490917be8a3158 Mon Sep 17 00:00:00 2001
-From: Po Liu <po.liu@nxp.com>
-Date: Fri, 15 Nov 2019 03:33:41 +0000
-Subject: [PATCH] enetc: update TSN Qbv PSPEED set according to adjust link
- speed
-
-ENETC has a register PSPEED to indicate the link speed of hardware.
-It is need to update accordingly. PSPEED field needs to be updated
-with the port speed for QBV scheduling purposes. Or else there is
-chance for gate slot not free by frame taking the MAC if PSPEED and
-phy speed not match. So update PSPEED when link adjust. This is
-implement by the adjust_link.
-
-Signed-off-by: Po Liu <Po.Liu@nxp.com>
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/freescale/enetc/enetc.c     | 13 +++++++--
- drivers/net/ethernet/freescale/enetc/enetc.h     |  8 ++++++
- drivers/net/ethernet/freescale/enetc/enetc_hw.h  |  5 ++++
- drivers/net/ethernet/freescale/enetc/enetc_pf.c  |  3 +++
- drivers/net/ethernet/freescale/enetc/enetc_qos.c | 34 ++++++++++++++++++++++++
- 5 files changed, 61 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
-@@ -742,9 +742,14 @@ void enetc_get_si_caps(struct enetc_si *
- 	si->num_rss = 0;
- 	val = enetc_rd(hw, ENETC_SIPCAPR0);
- 	if (val & ENETC_SIPCAPR0_RSS) {
--		val = enetc_rd(hw, ENETC_SIRSSCAPR);
--		si->num_rss = ENETC_SIRSSCAPR_GET_NUM_RSS(val);
-+		u32 rss;
-+
-+		rss = enetc_rd(hw, ENETC_SIRSSCAPR);
-+		si->num_rss = ENETC_SIRSSCAPR_GET_NUM_RSS(rss);
- 	}
-+
-+	if (val & ENETC_SIPCAPR0_QBV)
-+		si->hw_features |= ENETC_SI_F_QBV;
- }
- 
- static int enetc_dma_alloc_bdr(struct enetc_bdr *r, size_t bd_size)
-@@ -1306,8 +1311,12 @@ static void enetc_disable_interrupts(str
- 
- static void adjust_link(struct net_device *ndev)
- {
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
- 	struct phy_device *phydev = ndev->phydev;
- 
-+	if (priv->active_offloads & ENETC_F_QBV)
-+		enetc_sched_speed_set(ndev);
-+
- 	phy_print_status(phydev);
- }
- 
---- a/drivers/net/ethernet/freescale/enetc/enetc.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc.h
-@@ -118,6 +118,8 @@ enum enetc_errata {
- 	ENETC_ERR_UCMCSWP	= BIT(2),
- };
- 
-+#define ENETC_SI_F_QBV BIT(0)
-+
- /* PCI IEP device data */
- struct enetc_si {
- 	struct pci_dev *pdev;
-@@ -133,6 +135,7 @@ struct enetc_si {
- 	int num_fs_entries;
- 	int num_rss; /* number of RSS buckets */
- 	unsigned short pad;
-+	int hw_features;
- };
- 
- #define ENETC_SI_ALIGN	32
-@@ -173,6 +176,7 @@ struct enetc_cls_rule {
- enum enetc_active_offloads {
- 	ENETC_F_RX_TSTAMP	= BIT(0),
- 	ENETC_F_TX_TSTAMP	= BIT(1),
-+	ENETC_F_QBV             = BIT(2),
- };
- 
- struct enetc_ndev_priv {
-@@ -188,6 +192,8 @@ struct enetc_ndev_priv {
- 	u16 msg_enable;
- 	int active_offloads;
- 
-+	u32 speed; /* store speed for compare update pspeed */
-+
- 	struct enetc_bdr *tx_ring[16];
- 	struct enetc_bdr *rx_ring[16];
- 
-@@ -253,6 +259,8 @@ int enetc_send_cmd(struct enetc_si *si,
- 
- #ifdef CONFIG_FSL_ENETC_QOS
- int enetc_setup_tc_taprio(struct net_device *ndev, void *type_data);
-+void enetc_sched_speed_set(struct net_device *ndev);
- #else
- #define enetc_setup_tc_taprio(ndev, type_data) -EOPNOTSUPP
-+#define enetc_sched_speed_set(ndev) (void)0
- #endif
---- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-@@ -149,6 +149,11 @@ enum enetc_bdr_type {TX, RX};
- #define ENETC_PORT_BASE		0x10000
- #define ENETC_PMR		0x0000
- #define ENETC_PMR_EN	GENMASK(18, 16)
-+#define ENETC_PMR_PSPEED_MASK GENMASK(11, 8)
-+#define ENETC_PMR_PSPEED_10M	0
-+#define ENETC_PMR_PSPEED_100M	BIT(8)
-+#define ENETC_PMR_PSPEED_1000M	BIT(9)
-+#define ENETC_PMR_PSPEED_2500M	BIT(10)
- #define ENETC_PSR		0x0004 /* RO */
- #define ENETC_PSIPMR		0x0018
- #define ENETC_PSIPMR_SET_UP(n)	BIT(n) /* n = SI index */
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-@@ -742,6 +742,9 @@ static void enetc_pf_netdev_setup(struct
- 
- 	ndev->priv_flags |= IFF_UNICAST_FLT;
- 
-+	if (si->hw_features & ENETC_SI_F_QBV)
-+		priv->active_offloads |= ENETC_F_QBV;
-+
- 	/* pick up primary MAC address from SI */
- 	enetc_get_primary_mac_addr(&si->hw, ndev->dev_addr);
- }
---- a/drivers/net/ethernet/freescale/enetc/enetc_qos.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
-@@ -11,6 +11,40 @@ static u16 enetc_get_max_gcl_len(struct
- 		& ENETC_QBV_MAX_GCL_LEN_MASK;
- }
- 
-+void enetc_sched_speed_set(struct net_device *ndev)
-+{
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	struct phy_device *phydev = ndev->phydev;
-+	u32 old_speed = priv->speed;
-+	u32 speed, pspeed;
-+
-+	if (phydev->speed == old_speed)
-+		return;
-+
-+	speed = phydev->speed;
-+	switch (speed) {
-+	case SPEED_1000:
-+		pspeed = ENETC_PMR_PSPEED_1000M;
-+		break;
-+	case SPEED_2500:
-+		pspeed = ENETC_PMR_PSPEED_2500M;
-+		break;
-+	case SPEED_100:
-+		pspeed = ENETC_PMR_PSPEED_100M;
-+		break;
-+	case SPEED_10:
-+	default:
-+		pspeed = ENETC_PMR_PSPEED_10M;
-+		netdev_err(ndev, "Qbv PSPEED set speed link down.\n");
-+	}
-+
-+	priv->speed = speed;
-+	enetc_port_wr(&priv->si->hw, ENETC_PMR,
-+		      (enetc_port_rd(&priv->si->hw, ENETC_PMR)
-+		      & (~ENETC_PMR_PSPEED_MASK))
-+		      | pspeed);
-+}
-+
- static int enetc_setup_taprio(struct net_device *ndev,
- 			      struct tc_taprio_qopt_offload *admin_conf)
- {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0227-enetc-Fix-if_mode-extraction.patch b/target/linux/layerscape/patches-5.4/701-net-0227-enetc-Fix-if_mode-extraction.patch
deleted file mode 100644
index 37cbcd9777..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0227-enetc-Fix-if_mode-extraction.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 7b75e86c2cfc9fa48b582b04e939f18a54bdfa2e Mon Sep 17 00:00:00 2001
-From: Claudiu Manoil <claudiu.manoil@nxp.com>
-Date: Tue, 13 Aug 2019 13:59:24 +0300
-Subject: [PATCH] enetc: Fix if_mode extraction
-
-If if_mode not found then just handle it as fixed link
-(i.e mac2mac connection).
-
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
----
- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 17 ++++++-----------
- 1 file changed, 6 insertions(+), 11 deletions(-)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-@@ -754,6 +754,7 @@ static int enetc_of_get_phy(struct enetc
- 	struct enetc_pf *pf = enetc_si_priv(priv->si);
- 	struct device_node *np = priv->dev->of_node;
- 	struct device_node *mdio_np;
-+	int phy_mode;
- 	int err;
- 
- 	if (!np) {
-@@ -787,17 +788,11 @@ static int enetc_of_get_phy(struct enetc
- 		}
- 	}
- 
--	priv->if_mode = of_get_phy_mode(np);
--	if ((int)priv->if_mode < 0) {
--		dev_err(priv->dev, "missing phy type\n");
--		of_node_put(priv->phy_node);
--		if (of_phy_is_fixed_link(np))
--			of_phy_deregister_fixed_link(np);
--		else
--			enetc_mdio_remove(pf);
--
--		return -EINVAL;
--	}
-+	phy_mode = of_get_phy_mode(np);
-+	if (phy_mode < 0)
-+		priv->if_mode = PHY_INTERFACE_MODE_NA; /* fixed link */
-+	else
-+		priv->if_mode = phy_mode;
- 
- 	return 0;
- }
diff --git a/target/linux/layerscape/patches-5.4/701-net-0228-enetc-Make-mdio-accessors-more-generic.patch b/target/linux/layerscape/patches-5.4/701-net-0228-enetc-Make-mdio-accessors-more-generic.patch
deleted file mode 100644
index e83a0f9f66..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0228-enetc-Make-mdio-accessors-more-generic.patch
+++ /dev/null
@@ -1,221 +0,0 @@
-From 141fc778365ac0f1584ade0fd419af871e681646 Mon Sep 17 00:00:00 2001
-From: Claudiu Manoil <claudiu.manoil@nxp.com>
-Date: Mon, 12 Aug 2019 20:26:42 +0300
-Subject: [PATCH] enetc: Make mdio accessors more generic
-
-Refactoring needed to support multiple MDIO buses.
-'mdio_base' - MDIO registers base address - is being parameterized.
-The MDIO accessors are made more generic to be able to work with
-different MDIO register bases.
-Some includes get cleaned up in the process.
-
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
----
- drivers/net/ethernet/freescale/enetc/enetc_hw.h    |  1 +
- drivers/net/ethernet/freescale/enetc/enetc_mdio.c  | 60 +++++++++++++---------
- drivers/net/ethernet/freescale/enetc/enetc_mdio.h  |  2 +-
- .../net/ethernet/freescale/enetc/enetc_pci_mdio.c  |  2 +
- 4 files changed, 39 insertions(+), 26 deletions(-)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-@@ -200,6 +200,7 @@ enum enetc_bdr_type {TX, RX};
- #define ENETC_PFPMR		0x1900
- #define ENETC_PFPMR_PMACE	BIT(1)
- #define ENETC_PFPMR_MWLM	BIT(0)
-+#define ENETC_EMDIO_BASE	0x1c00
- #define ENETC_PSIUMHFR0(n, err)	(((err) ? 0x1d08 : 0x1d00) + (n) * 0x10)
- #define ENETC_PSIUMHFR1(n)	(0x1d04 + (n) * 0x10)
- #define ENETC_PSIMMHFR0(n, err)	(((err) ? 0x1d00 : 0x1d08) + (n) * 0x10)
---- a/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
-@@ -6,19 +6,30 @@
- #include <linux/iopoll.h>
- #include <linux/of.h>
- 
-+#include "enetc_pf.h"
- #include "enetc_mdio.h"
- 
--#define	ENETC_MDIO_REG_OFFSET	0x1c00
- #define	ENETC_MDIO_CFG	0x0	/* MDIO configuration and status */
- #define	ENETC_MDIO_CTL	0x4	/* MDIO control */
- #define	ENETC_MDIO_DATA	0x8	/* MDIO data */
- #define	ENETC_MDIO_ADDR	0xc	/* MDIO address */
- 
--#define enetc_mdio_rd(hw, off) \
--	enetc_port_rd(hw, ENETC_##off + ENETC_MDIO_REG_OFFSET)
--#define enetc_mdio_wr(hw, off, val) \
--	enetc_port_wr(hw, ENETC_##off + ENETC_MDIO_REG_OFFSET, val)
--#define enetc_mdio_rd_reg(off)	enetc_mdio_rd(hw, off)
-+static inline u32 _enetc_mdio_rd(struct enetc_mdio_priv *mdio_priv, int off)
-+{
-+	return enetc_port_rd(mdio_priv->hw, mdio_priv->mdio_base + off);
-+}
-+
-+static inline void _enetc_mdio_wr(struct enetc_mdio_priv *mdio_priv, int off,
-+				  u32 val)
-+{
-+	enetc_port_wr(mdio_priv->hw, mdio_priv->mdio_base + off, val);
-+}
-+
-+#define enetc_mdio_rd(mdio_priv, off) \
-+	_enetc_mdio_rd(mdio_priv, ENETC_##off)
-+#define enetc_mdio_wr(mdio_priv, off, val) \
-+	_enetc_mdio_wr(mdio_priv, ENETC_##off, val)
-+#define enetc_mdio_rd_reg(off)	enetc_mdio_rd(mdio_priv, off)
- 
- #define ENETC_MDC_DIV		258
- 
-@@ -35,7 +46,7 @@
- #define MDIO_DATA(x)		((x) & 0xffff)
- 
- #define TIMEOUT	1000
--static int enetc_mdio_wait_complete(struct enetc_hw *hw)
-+static int enetc_mdio_wait_complete(struct enetc_mdio_priv *mdio_priv)
- {
- 	u32 val;
- 
-@@ -46,7 +57,6 @@ static int enetc_mdio_wait_complete(stru
- int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum, u16 value)
- {
- 	struct enetc_mdio_priv *mdio_priv = bus->priv;
--	struct enetc_hw *hw = mdio_priv->hw;
- 	u32 mdio_ctl, mdio_cfg;
- 	u16 dev_addr;
- 	int ret;
-@@ -61,29 +71,29 @@ int enetc_mdio_write(struct mii_bus *bus
- 		mdio_cfg &= ~MDIO_CFG_ENC45;
- 	}
- 
--	enetc_mdio_wr(hw, MDIO_CFG, mdio_cfg);
-+	enetc_mdio_wr(mdio_priv, MDIO_CFG, mdio_cfg);
- 
--	ret = enetc_mdio_wait_complete(hw);
-+	ret = enetc_mdio_wait_complete(mdio_priv);
- 	if (ret)
- 		return ret;
- 
- 	/* set port and dev addr */
- 	mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr);
--	enetc_mdio_wr(hw, MDIO_CTL, mdio_ctl);
-+	enetc_mdio_wr(mdio_priv, MDIO_CTL, mdio_ctl);
- 
- 	/* set the register address */
- 	if (regnum & MII_ADDR_C45) {
--		enetc_mdio_wr(hw, MDIO_ADDR, regnum & 0xffff);
-+		enetc_mdio_wr(mdio_priv, MDIO_ADDR, regnum & 0xffff);
- 
--		ret = enetc_mdio_wait_complete(hw);
-+		ret = enetc_mdio_wait_complete(mdio_priv);
- 		if (ret)
- 			return ret;
- 	}
- 
- 	/* write the value */
--	enetc_mdio_wr(hw, MDIO_DATA, MDIO_DATA(value));
-+	enetc_mdio_wr(mdio_priv, MDIO_DATA, MDIO_DATA(value));
- 
--	ret = enetc_mdio_wait_complete(hw);
-+	ret = enetc_mdio_wait_complete(mdio_priv);
- 	if (ret)
- 		return ret;
- 
-@@ -93,7 +103,6 @@ int enetc_mdio_write(struct mii_bus *bus
- int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
- {
- 	struct enetc_mdio_priv *mdio_priv = bus->priv;
--	struct enetc_hw *hw = mdio_priv->hw;
- 	u32 mdio_ctl, mdio_cfg;
- 	u16 dev_addr, value;
- 	int ret;
-@@ -107,41 +116,41 @@ int enetc_mdio_read(struct mii_bus *bus,
- 		mdio_cfg &= ~MDIO_CFG_ENC45;
- 	}
- 
--	enetc_mdio_wr(hw, MDIO_CFG, mdio_cfg);
-+	enetc_mdio_wr(mdio_priv, MDIO_CFG, mdio_cfg);
- 
--	ret = enetc_mdio_wait_complete(hw);
-+	ret = enetc_mdio_wait_complete(mdio_priv);
- 	if (ret)
- 		return ret;
- 
- 	/* set port and device addr */
- 	mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr);
--	enetc_mdio_wr(hw, MDIO_CTL, mdio_ctl);
-+	enetc_mdio_wr(mdio_priv, MDIO_CTL, mdio_ctl);
- 
- 	/* set the register address */
- 	if (regnum & MII_ADDR_C45) {
--		enetc_mdio_wr(hw, MDIO_ADDR, regnum & 0xffff);
-+		enetc_mdio_wr(mdio_priv, MDIO_ADDR, regnum & 0xffff);
- 
--		ret = enetc_mdio_wait_complete(hw);
-+		ret = enetc_mdio_wait_complete(mdio_priv);
- 		if (ret)
- 			return ret;
- 	}
- 
- 	/* initiate the read */
--	enetc_mdio_wr(hw, MDIO_CTL, mdio_ctl | MDIO_CTL_READ);
-+	enetc_mdio_wr(mdio_priv, MDIO_CTL, mdio_ctl | MDIO_CTL_READ);
- 
--	ret = enetc_mdio_wait_complete(hw);
-+	ret = enetc_mdio_wait_complete(mdio_priv);
- 	if (ret)
- 		return ret;
- 
- 	/* return all Fs if nothing was there */
--	if (enetc_mdio_rd(hw, MDIO_CFG) & MDIO_CFG_RD_ER) {
-+	if (enetc_mdio_rd(mdio_priv, MDIO_CFG) & MDIO_CFG_RD_ER) {
- 		dev_dbg(&bus->dev,
- 			"Error while reading PHY%d reg at %d.%hhu\n",
- 			phy_id, dev_addr, regnum);
- 		return 0xffff;
- 	}
- 
--	value = enetc_mdio_rd(hw, MDIO_DATA) & 0xffff;
-+	value = enetc_mdio_rd(mdio_priv, MDIO_DATA) & 0xffff;
- 
- 	return value;
- }
-@@ -164,6 +173,7 @@ int enetc_mdio_probe(struct enetc_pf *pf
- 	bus->parent = dev;
- 	mdio_priv = bus->priv;
- 	mdio_priv->hw = &pf->si->hw;
-+	mdio_priv->mdio_base = ENETC_EMDIO_BASE;
- 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
- 
- 	np = of_get_child_by_name(dev->of_node, "mdio");
---- a/drivers/net/ethernet/freescale/enetc/enetc_mdio.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_mdio.h
-@@ -2,10 +2,10 @@
- /* Copyright 2019 NXP */
- 
- #include <linux/phy.h>
--#include "enetc_pf.h"
- 
- struct enetc_mdio_priv {
- 	struct enetc_hw *hw;
-+	int mdio_base;
- };
- 
- int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum, u16 value);
---- a/drivers/net/ethernet/freescale/enetc/enetc_pci_mdio.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pci_mdio.c
-@@ -1,6 +1,7 @@
- // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
- /* Copyright 2019 NXP */
- #include <linux/of_mdio.h>
-+#include "enetc_pf.h"
- #include "enetc_mdio.h"
- 
- #define ENETC_MDIO_DEV_ID	0xee01
-@@ -31,6 +32,7 @@ static int enetc_pci_mdio_probe(struct p
- 	bus->parent = dev;
- 	mdio_priv = bus->priv;
- 	mdio_priv->hw = hw;
-+	mdio_priv->mdio_base = ENETC_EMDIO_BASE;
- 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
- 
- 	pcie_flr(pdev);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0229-enetc-Initialize-SerDes-for-SGMII-and-SXGMII-protoco.patch b/target/linux/layerscape/patches-5.4/701-net-0229-enetc-Initialize-SerDes-for-SGMII-and-SXGMII-protoco.patch
deleted file mode 100644
index a7e8c6860e..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0229-enetc-Initialize-SerDes-for-SGMII-and-SXGMII-protoco.patch
+++ /dev/null
@@ -1,169 +0,0 @@
-From 6943ed031ee75f13a950e293f92db68ea2ec2786 Mon Sep 17 00:00:00 2001
-From: Claudiu Manoil <claudiu.manoil@nxp.com>
-Date: Wed, 14 Aug 2019 14:34:47 +0300
-Subject: [PATCH] enetc: Initialize SerDes for SGMII and SXGMII protocols
-
-ENETC has ethernet MACs capable of SGMII and SXGMII but
-in order to use these protocols some serdes configurations
-need to be performed.
-The serdes is configurable via an internal MDIO bus
-connected to an internal PCS device, all reads/writes are
-performed at address 0.
-This patch basically removes the dependecy on a bootloader
-regarding serdes initialization.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
----
- drivers/net/ethernet/freescale/enetc/enetc_hw.h   | 17 +++++++
- drivers/net/ethernet/freescale/enetc/enetc_mdio.c | 24 +++++++++
- drivers/net/ethernet/freescale/enetc/enetc_pf.c   | 59 +++++++++++++++++++++++
- drivers/net/ethernet/freescale/enetc/enetc_pf.h   |  2 +
- 4 files changed, 102 insertions(+)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-@@ -223,6 +223,23 @@ enum enetc_bdr_type {TX, RX};
- #define ENETC_PM0_MAXFRM	0x8014
- #define ENETC_SET_TX_MTU(val)	((val) << 16)
- #define ENETC_SET_MAXFRM(val)	((val) & 0xffff)
-+
-+#define ENETC_PM_IMDIO_BASE	0x8030
-+/* PCS registers */
-+#define ENETC_PCS_CR			0x0
-+#define ENETC_PCS_CR_RESET_AN		0x1200
-+#define ENETC_PCS_CR_DEF_VAL		0x0140
-+#define ENETC_PCS_CR_LANE_RESET		0x8000
-+#define ENETC_PCS_DEV_ABILITY		0x04
-+#define ENETC_PCS_DEV_ABILITY_SGMII	0x4001
-+#define ENETC_PCS_DEV_ABILITY_SXGMII	0x5001
-+#define ENETC_PCS_LINK_TIMER1		0x12
-+#define ENETC_PCS_LINK_TIMER1_VAL	0x06a0
-+#define ENETC_PCS_LINK_TIMER2		0x13
-+#define ENETC_PCS_LINK_TIMER2_VAL	0x0003
-+#define ENETC_PCS_IF_MODE		0x14
-+#define ENETC_PCS_IF_MODE_SGMII_AN	0x0003
-+
- #define ENETC_PM0_IF_MODE	0x8300
- #define ENETC_PMO_IFM_RG	BIT(2)
- #define ENETC_PM0_IFM_RLP	(BIT(5) | BIT(11))
---- a/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
-@@ -200,3 +200,27 @@ void enetc_mdio_remove(struct enetc_pf *
- 	if (pf->mdio)
- 		mdiobus_unregister(pf->mdio);
- }
-+
-+int enetc_imdio_init(struct enetc_pf *pf)
-+{
-+	struct device *dev = &pf->si->pdev->dev;
-+	struct enetc_mdio_priv *mdio_priv;
-+	struct mii_bus *bus;
-+
-+	bus = devm_mdiobus_alloc_size(dev, sizeof(*mdio_priv));
-+	if (!bus)
-+		return -ENOMEM;
-+
-+	bus->name = "FSL ENETC internal MDIO Bus";
-+	bus->read = enetc_mdio_read;
-+	bus->write = enetc_mdio_write;
-+	bus->parent = dev;
-+	mdio_priv = bus->priv;
-+	mdio_priv->hw = &pf->si->hw;
-+	mdio_priv->mdio_base = ENETC_PM_IMDIO_BASE;
-+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
-+
-+	pf->imdio = bus;
-+
-+	return 0;
-+}
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-@@ -872,6 +872,61 @@ static void enetc_init_unused_port(struc
- 	enetc_free_cbdr(dev, &si->cbd_ring);
- }
- 
-+static void enetc_configure_sgmii(struct mii_bus *imdio)
-+{
-+	/* Set to SGMII mode, use AN */
-+	imdio->write(imdio, 0, ENETC_PCS_IF_MODE,
-+		     ENETC_PCS_IF_MODE_SGMII_AN);
-+
-+	/* Dev ability - SGMII */
-+	imdio->write(imdio, 0, ENETC_PCS_DEV_ABILITY,
-+		     ENETC_PCS_DEV_ABILITY_SGMII);
-+
-+	/* Adjust link timer for SGMII */
-+	imdio->write(imdio, 0, ENETC_PCS_LINK_TIMER1,
-+		     ENETC_PCS_LINK_TIMER1_VAL);
-+	imdio->write(imdio, 0, ENETC_PCS_LINK_TIMER2,
-+		     ENETC_PCS_LINK_TIMER2_VAL);
-+
-+	/* restart PCS AN */
-+	imdio->write(imdio, 0, ENETC_PCS_CR,
-+		     ENETC_PCS_CR_RESET_AN | ENETC_PCS_CR_DEF_VAL);
-+}
-+
-+static void enetc_configure_sxgmii(struct mii_bus *imdio)
-+{
-+	/* Dev ability - SXGMII */
-+	imdio->write(imdio, 0, MII_ADDR_C45 | (MDIO_MMD_VEND2 << 16) |
-+		     ENETC_PCS_DEV_ABILITY, ENETC_PCS_DEV_ABILITY_SXGMII);
-+
-+	/* Restart PCS AN */
-+	imdio->write(imdio, 0, MII_ADDR_C45 | (MDIO_MMD_VEND2 << 16) |
-+		     ENETC_PCS_CR,
-+		     ENETC_PCS_CR_LANE_RESET | ENETC_PCS_CR_RESET_AN);
-+}
-+
-+static int enetc_configure_serdes(struct enetc_ndev_priv *priv)
-+{
-+	struct enetc_pf *pf = enetc_si_priv(priv->si);
-+	int err;
-+
-+	if (priv->if_mode != PHY_INTERFACE_MODE_SGMII &&
-+	    priv->if_mode != PHY_INTERFACE_MODE_XGMII)
-+		return 0;
-+
-+	err = enetc_imdio_init(pf);
-+	if (err)
-+		return err;
-+
-+	if (priv->if_mode == PHY_INTERFACE_MODE_SGMII)
-+		enetc_configure_sgmii(pf->imdio);
-+
-+	if (priv->if_mode == PHY_INTERFACE_MODE_XGMII)
-+		enetc_configure_sxgmii(pf->imdio);
-+
-+	return 0;
-+}
-+
- static int enetc_pf_probe(struct pci_dev *pdev,
- 			  const struct pci_device_id *ent)
- {
-@@ -956,6 +1011,10 @@ static int enetc_pf_probe(struct pci_dev
- 	if (err)
- 		dev_warn(&pdev->dev, "Fallback to PHY-less operation\n");
- 
-+	err = enetc_configure_serdes(priv);
-+	if (err)
-+		dev_warn(&pdev->dev, "Attempted serdes config but failed\n");
-+
- 	err = register_netdev(ndev);
- 	if (err)
- 		goto err_reg_netdev;
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
-@@ -44,6 +44,7 @@ struct enetc_pf {
- 	DECLARE_BITMAP(active_vlans, VLAN_N_VID);
- 
- 	struct mii_bus *mdio; /* saved for cleanup */
-+	struct mii_bus *imdio;
- };
- 
- int enetc_msg_psi_init(struct enetc_pf *pf);
-@@ -53,3 +54,4 @@ void enetc_msg_handle_rxmsg(struct enetc
- /* MDIO */
- int enetc_mdio_probe(struct enetc_pf *pf);
- void enetc_mdio_remove(struct enetc_pf *pf);
-+int enetc_imdio_init(struct enetc_pf *pf);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0230-enetc-Drop-redundant-device-node-check.patch b/target/linux/layerscape/patches-5.4/701-net-0230-enetc-Drop-redundant-device-node-check.patch
deleted file mode 100644
index a67124116f..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0230-enetc-Drop-redundant-device-node-check.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 219e330d8b6b5e3f84a7a593969f948bf2fec558 Mon Sep 17 00:00:00 2001
-From: Claudiu Manoil <claudiu.manoil@nxp.com>
-Date: Fri, 6 Sep 2019 16:17:20 +0300
-Subject: [PATCH] enetc: Drop redundant device node check
-
-The existence of the DT port node is the first thing checked
-at probe time, and probing won't continue if the node is missing.
-
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
----
- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 5 -----
- 1 file changed, 5 deletions(-)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-@@ -757,11 +757,6 @@ static int enetc_of_get_phy(struct enetc
- 	int phy_mode;
- 	int err;
- 
--	if (!np) {
--		dev_err(priv->dev, "missing ENETC port node\n");
--		return -ENODEV;
--	}
--
- 	priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
- 	if (!priv->phy_node) {
- 		if (!of_phy_is_fixed_link(np)) {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0231-enetc-Use-DT-protocol-information-to-set-up-the-port.patch b/target/linux/layerscape/patches-5.4/701-net-0231-enetc-Use-DT-protocol-information-to-set-up-the-port.patch
deleted file mode 100644
index 8c3ea7fbbe..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0231-enetc-Use-DT-protocol-information-to-set-up-the-port.patch
+++ /dev/null
@@ -1,195 +0,0 @@
-From 98f64a89977a32df96cdb8aaf3884086b2309924 Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Tue, 27 Aug 2019 15:14:11 +0300
-Subject: [PATCH] enetc: Use DT protocol information to set up the ports
-
-Use DT information rather than in-band information from bootloader to
-set up MAC for XGMII. For RGMII use the DT indication in addition to
-RGMII defaults in hardware.
-However, this implies that PHY connection information needs to be
-extracted before netdevice creation, when the ENETC Port MAC is
-being configured.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
----
- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 55 ++++++++++++++-----------
- drivers/net/ethernet/freescale/enetc/enetc_pf.h |  3 ++
- 2 files changed, 33 insertions(+), 25 deletions(-)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-@@ -507,7 +507,8 @@ static void enetc_port_si_configure(stru
- 	enetc_port_wr(hw, ENETC_PSIVLANFMR, ENETC_PSIVLANFMR_VS);
- }
- 
--static void enetc_configure_port_mac(struct enetc_hw *hw)
-+static void enetc_configure_port_mac(struct enetc_hw *hw,
-+				     phy_interface_t phy_mode)
- {
- 	enetc_port_wr(hw, ENETC_PM0_MAXFRM,
- 		      ENETC_SET_MAXFRM(ENETC_RX_MAXFRM_SIZE));
-@@ -523,9 +524,11 @@ static void enetc_configure_port_mac(str
- 		      ENETC_PM0_CMD_TXP	| ENETC_PM0_PROMISC |
- 		      ENETC_PM0_TX_EN | ENETC_PM0_RX_EN);
- 	/* set auto-speed for RGMII */
--	if (enetc_port_rd(hw, ENETC_PM0_IF_MODE) & ENETC_PMO_IFM_RG)
-+	if (enetc_port_rd(hw, ENETC_PM0_IF_MODE) & ENETC_PMO_IFM_RG ||
-+	    phy_mode == PHY_INTERFACE_MODE_RGMII)
- 		enetc_port_wr(hw, ENETC_PM0_IF_MODE, ENETC_PM0_IFM_RGAUTO);
--	if (enetc_global_rd(hw, ENETC_G_EPFBLPR(1)) == ENETC_G_EPFBLPR1_XGMII)
-+
-+	if (phy_mode == PHY_INTERFACE_MODE_XGMII)
- 		enetc_port_wr(hw, ENETC_PM0_IF_MODE, ENETC_PM0_IFM_XGMII);
- }
- 
-@@ -549,7 +552,7 @@ static void enetc_configure_port(struct
- 
- 	enetc_configure_port_pmac(hw);
- 
--	enetc_configure_port_mac(hw);
-+	enetc_configure_port_mac(hw, pf->if_mode);
- 
- 	enetc_port_si_configure(pf->si);
- 
-@@ -749,28 +752,28 @@ static void enetc_pf_netdev_setup(struct
- 	enetc_get_primary_mac_addr(&si->hw, ndev->dev_addr);
- }
- 
--static int enetc_of_get_phy(struct enetc_ndev_priv *priv)
-+static int enetc_of_get_phy(struct enetc_pf *pf)
- {
--	struct enetc_pf *pf = enetc_si_priv(priv->si);
--	struct device_node *np = priv->dev->of_node;
-+	struct device *dev = &pf->si->pdev->dev;
-+	struct device_node *np = dev->of_node;
- 	struct device_node *mdio_np;
- 	int phy_mode;
- 	int err;
- 
--	priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
--	if (!priv->phy_node) {
-+	pf->phy_node = of_parse_phandle(np, "phy-handle", 0);
-+	if (!pf->phy_node) {
- 		if (!of_phy_is_fixed_link(np)) {
--			dev_err(priv->dev, "PHY not specified\n");
-+			dev_err(dev, "PHY not specified\n");
- 			return -ENODEV;
- 		}
- 
- 		err = of_phy_register_fixed_link(np);
- 		if (err < 0) {
--			dev_err(priv->dev, "fixed link registration failed\n");
-+			dev_err(dev, "fixed link registration failed\n");
- 			return err;
- 		}
- 
--		priv->phy_node = of_node_get(np);
-+		pf->phy_node = of_node_get(np);
- 	}
- 
- 	mdio_np = of_get_child_by_name(np, "mdio");
-@@ -778,28 +781,28 @@ static int enetc_of_get_phy(struct enetc
- 		of_node_put(mdio_np);
- 		err = enetc_mdio_probe(pf);
- 		if (err) {
--			of_node_put(priv->phy_node);
-+			of_node_put(pf->phy_node);
- 			return err;
- 		}
- 	}
- 
- 	phy_mode = of_get_phy_mode(np);
- 	if (phy_mode < 0)
--		priv->if_mode = PHY_INTERFACE_MODE_NA; /* fixed link */
-+		pf->if_mode = PHY_INTERFACE_MODE_NA; /* fixed link */
- 	else
--		priv->if_mode = phy_mode;
-+		pf->if_mode = phy_mode;
- 
- 	return 0;
- }
- 
--static void enetc_of_put_phy(struct enetc_ndev_priv *priv)
-+static void enetc_of_put_phy(struct enetc_pf *pf)
- {
--	struct device_node *np = priv->dev->of_node;
-+	struct device_node *np = pf->si->pdev->dev.of_node;
- 
- 	if (np && of_phy_is_fixed_link(np))
- 		of_phy_deregister_fixed_link(np);
--	if (priv->phy_node)
--		of_node_put(priv->phy_node);
-+	if (pf->phy_node)
-+		of_node_put(pf->phy_node);
- }
- 
- /* Initialize the entire shared memory for the flow steering entries
-@@ -955,6 +958,10 @@ static int enetc_pf_probe(struct pci_dev
- 	pf->si = si;
- 	pf->total_vfs = pci_sriov_get_totalvfs(pdev);
- 
-+	err = enetc_of_get_phy(pf);
-+	if (err)
-+		dev_warn(&pdev->dev, "Fallback to PHY-less operation\n");
-+
- 	enetc_configure_port(pf);
- 
- 	enetc_get_si_caps(si);
-@@ -969,6 +976,8 @@ static int enetc_pf_probe(struct pci_dev
- 	enetc_pf_netdev_setup(si, ndev, &enetc_ndev_ops);
- 
- 	priv = netdev_priv(ndev);
-+	priv->phy_node = pf->phy_node;
-+	priv->if_mode = pf->if_mode;
- 
- 	enetc_init_si_rings_params(priv);
- 
-@@ -1002,10 +1011,6 @@ static int enetc_pf_probe(struct pci_dev
- 		goto err_alloc_msix;
- 	}
- 
--	err = enetc_of_get_phy(priv);
--	if (err)
--		dev_warn(&pdev->dev, "Fallback to PHY-less operation\n");
--
- 	err = enetc_configure_serdes(priv);
- 	if (err)
- 		dev_warn(&pdev->dev, "Attempted serdes config but failed\n");
-@@ -1023,7 +1028,6 @@ static int enetc_pf_probe(struct pci_dev
- 
- err_reg_netdev:
- 	enetc_mdio_remove(pf);
--	enetc_of_put_phy(priv);
- 	enetc_free_msix(priv);
- err_config_si:
- err_init_port_rss:
-@@ -1034,6 +1038,7 @@ err_alloc_si_res:
- 	si->ndev = NULL;
- 	free_netdev(ndev);
- err_alloc_netdev:
-+	enetc_of_put_phy(pf);
- err_device_disabled:
- err_map_pf_space:
- 	enetc_pci_remove(pdev);
-@@ -1057,7 +1062,7 @@ static void enetc_pf_remove(struct pci_d
- 	unregister_netdev(si->ndev);
- 
- 	enetc_mdio_remove(pf);
--	enetc_of_put_phy(priv);
-+	enetc_of_put_phy(pf);
- 
- 	enetc_free_msix(priv);
- 
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
-@@ -45,6 +45,9 @@ struct enetc_pf {
- 
- 	struct mii_bus *mdio; /* saved for cleanup */
- 	struct mii_bus *imdio;
-+
-+	struct device_node *phy_node;
-+	phy_interface_t if_mode;
- };
- 
- int enetc_msg_psi_init(struct enetc_pf *pf);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0232-enetc-Handle-USXGMII-protocol.patch b/target/linux/layerscape/patches-5.4/701-net-0232-enetc-Handle-USXGMII-protocol.patch
deleted file mode 100644
index 8d4db97a26..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0232-enetc-Handle-USXGMII-protocol.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From bb700603e66a1294049aa479ad560443496c893b Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Fri, 20 Sep 2019 19:41:10 +0300
-Subject: [PATCH] enetc: Handle USXGMII protocol
-
-Adds USXGMII protocol which is now supported in Linux.  XGMII is kept for
-compatibility although there is no plain XGMII support in ENETC.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-@@ -528,7 +528,8 @@ static void enetc_configure_port_mac(str
- 	    phy_mode == PHY_INTERFACE_MODE_RGMII)
- 		enetc_port_wr(hw, ENETC_PM0_IF_MODE, ENETC_PM0_IFM_RGAUTO);
- 
--	if (phy_mode == PHY_INTERFACE_MODE_XGMII)
-+	if (phy_mode == PHY_INTERFACE_MODE_XGMII ||
-+	    phy_mode == PHY_INTERFACE_MODE_USXGMII)
- 		enetc_port_wr(hw, ENETC_PM0_IF_MODE, ENETC_PM0_IFM_XGMII);
- }
- 
-@@ -909,7 +910,8 @@ static int enetc_configure_serdes(struct
- 	int err;
- 
- 	if (priv->if_mode != PHY_INTERFACE_MODE_SGMII &&
--	    priv->if_mode != PHY_INTERFACE_MODE_XGMII)
-+	    priv->if_mode != PHY_INTERFACE_MODE_XGMII &&
-+	    priv->if_mode != PHY_INTERFACE_MODE_USXGMII)
- 		return 0;
- 
- 	err = enetc_imdio_init(pf);
-@@ -919,7 +921,8 @@ static int enetc_configure_serdes(struct
- 	if (priv->if_mode == PHY_INTERFACE_MODE_SGMII)
- 		enetc_configure_sgmii(pf->imdio);
- 
--	if (priv->if_mode == PHY_INTERFACE_MODE_XGMII)
-+	if (priv->if_mode == PHY_INTERFACE_MODE_XGMII ||
-+	    priv->if_mode == PHY_INTERFACE_MODE_USXGMII)
- 		enetc_configure_sxgmii(pf->imdio);
- 
- 	return 0;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0233-enetc-Enable-live-mac-addr-change-for-PF.patch b/target/linux/layerscape/patches-5.4/701-net-0233-enetc-Enable-live-mac-addr-change-for-PF.patch
deleted file mode 100644
index 20b59685d2..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0233-enetc-Enable-live-mac-addr-change-for-PF.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 9a963c982be787902892354a6ad669a5644b8338 Mon Sep 17 00:00:00 2001
-From: Claudiu Manoil <claudiu.manoil@nxp.com>
-Date: Mon, 16 Sep 2019 19:22:08 +0300
-Subject: [PATCH] enetc: Enable live mac addr change for PF
-
-Use device flag IFF_LIVE_ADDR_CHANGE to signal that
-the device supports changing the primary mac address
-for a ENETC port, when the PF eth interface is running.
-This capability is required by certain applications,
-like bonding mode 6 (Adaptive Load Balancing).
-
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
----
- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-@@ -744,7 +744,7 @@ static void enetc_pf_netdev_setup(struct
- 		ndev->features &= ~NETIF_F_HW_CSUM;
- 	}
- 
--	ndev->priv_flags |= IFF_UNICAST_FLT;
-+	ndev->priv_flags |= IFF_UNICAST_FLT | IFF_LIVE_ADDR_CHANGE;
- 
- 	if (si->hw_features & ENETC_SI_F_QBV)
- 		priv->active_offloads |= ENETC_F_QBV;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0234-enetc-WA-for-MDIO-register-access-issue.patch b/target/linux/layerscape/patches-5.4/701-net-0234-enetc-WA-for-MDIO-register-access-issue.patch
deleted file mode 100644
index 73dbdc752a..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0234-enetc-WA-for-MDIO-register-access-issue.patch
+++ /dev/null
@@ -1,409 +0,0 @@
-From 0f62a794b41ad14a962c70445844d61a8097805e Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Tue, 20 Aug 2019 12:34:22 +0300
-Subject: [PATCH] enetc: WA for MDIO register access issue
-
-Due to a hardware issue access to MDIO registers concurrent with other
-ENETC register access may lead to the MDIO access being dropped or
-corrupted.  The workaround introduces locking for all register access in
-ENETC space.  To reduce performance impact, code except MDIO uses per-cpu
-locks, MDIO code having to acquire all per-CPU locks to perform an access.
-To further reduce the performance impact, datapath functions acquire the
-per-cpu lock fewer times and use _hot accessors.  All the rest of the code
-uses the _wa accessors which lock every time a register is accessed.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/ethernet/freescale/enetc/enetc.c      |  85 ++++++++++++++----
- drivers/net/ethernet/freescale/enetc/enetc_hw.h   | 105 +++++++++++++++++++++-
- drivers/net/ethernet/freescale/enetc/enetc_mdio.c |   4 +-
- drivers/net/ethernet/freescale/enetc/enetc_pf.c   |   3 +
- 4 files changed, 176 insertions(+), 21 deletions(-)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
-@@ -20,8 +20,13 @@ netdev_tx_t enetc_xmit(struct sk_buff *s
- {
- 	struct enetc_ndev_priv *priv = netdev_priv(ndev);
- 	struct enetc_bdr *tx_ring;
-+	unsigned long flags;
-+	/* pointer to per-cpu ENETC lock for register access issue WA */
-+	spinlock_t *lock;
- 	int count;
- 
-+	lock = this_cpu_ptr(&enetc_gregs);
-+
- 	tx_ring = priv->tx_ring[skb->queue_mapping];
- 
- 	if (unlikely(skb_shinfo(skb)->nr_frags > ENETC_MAX_SKB_FRAGS))
-@@ -34,7 +39,12 @@ netdev_tx_t enetc_xmit(struct sk_buff *s
- 		return NETDEV_TX_BUSY;
- 	}
- 
-+	spin_lock_irqsave(lock, flags);
-+
- 	count = enetc_map_tx_buffs(tx_ring, skb, priv->active_offloads);
-+
-+	spin_unlock_irqrestore(lock, flags);
-+
- 	if (unlikely(!count))
- 		goto drop_packet_err;
- 
-@@ -228,7 +238,7 @@ static int enetc_map_tx_buffs(struct ene
- 	tx_ring->next_to_use = i;
- 
- 	/* let H/W know BD ring has been updated */
--	enetc_wr_reg(tx_ring->tpir, i); /* includes wmb() */
-+	enetc_wr_reg_hot(tx_ring->tpir, i); /* includes wmb() */
- 
- 	return count;
- 
-@@ -249,13 +259,21 @@ dma_err:
- static irqreturn_t enetc_msix(int irq, void *data)
- {
- 	struct enetc_int_vector	*v = data;
-+	unsigned long flags;
-+	/* pointer to per-cpu ENETC lock for register access issue WA */
-+	spinlock_t *lock;
- 	int i;
- 
-+	lock = this_cpu_ptr(&enetc_gregs);
-+	spin_lock_irqsave(lock, flags);
-+
- 	/* disable interrupts */
--	enetc_wr_reg(v->rbier, 0);
-+	enetc_wr_reg_hot(v->rbier, 0);
- 
- 	for_each_set_bit(i, &v->tx_rings_map, ENETC_MAX_NUM_TXQS)
--		enetc_wr_reg(v->tbier_base + ENETC_BDR_OFF(i), 0);
-+		enetc_wr_reg_hot(v->tbier_base + ENETC_BDR_OFF(i), 0);
-+
-+	spin_unlock_irqrestore(lock, flags);
- 
- 	napi_schedule_irqoff(&v->napi);
- 
-@@ -271,6 +289,9 @@ static int enetc_poll(struct napi_struct
- 	struct enetc_int_vector
- 		*v = container_of(napi, struct enetc_int_vector, napi);
- 	bool complete = true;
-+	unsigned long flags;
-+	/* pointer to per-cpu ENETC lock for register access issue WA */
-+	spinlock_t *lock;
- 	int work_done;
- 	int i;
- 
-@@ -287,19 +308,24 @@ static int enetc_poll(struct napi_struct
- 
- 	napi_complete_done(napi, work_done);
- 
-+	lock = this_cpu_ptr(&enetc_gregs);
-+	spin_lock_irqsave(lock, flags);
-+
- 	/* enable interrupts */
--	enetc_wr_reg(v->rbier, ENETC_RBIER_RXTIE);
-+	enetc_wr_reg_hot(v->rbier, ENETC_RBIER_RXTIE);
- 
- 	for_each_set_bit(i, &v->tx_rings_map, ENETC_MAX_NUM_TXQS)
--		enetc_wr_reg(v->tbier_base + ENETC_BDR_OFF(i),
--			     ENETC_TBIER_TXTIE);
-+		enetc_wr_reg_hot(v->tbier_base + ENETC_BDR_OFF(i),
-+				 ENETC_TBIER_TXTIE);
-+
-+	spin_unlock_irqrestore(lock, flags);
- 
- 	return work_done;
- }
- 
- static int enetc_bd_ready_count(struct enetc_bdr *tx_ring, int ci)
- {
--	int pi = enetc_rd_reg(tx_ring->tcir) & ENETC_TBCIR_IDX_MASK;
-+	int pi = enetc_rd_reg_hot(tx_ring->tcir) & ENETC_TBCIR_IDX_MASK;
- 
- 	return pi >= ci ? pi - ci : tx_ring->bd_count - ci + pi;
- }
-@@ -337,9 +363,18 @@ static bool enetc_clean_tx_ring(struct e
- 	bool do_tstamp;
- 	u64 tstamp = 0;
- 
-+	unsigned long flags;
-+	/* pointer to per-cpu ENETC lock for register access issue WA */
-+	spinlock_t *lock;
-+
-+	lock = this_cpu_ptr(&enetc_gregs);
-+
- 	i = tx_ring->next_to_clean;
- 	tx_swbd = &tx_ring->tx_swbd[i];
-+
-+	spin_lock_irqsave(lock, flags);
- 	bds_to_clean = enetc_bd_ready_count(tx_ring, i);
-+	spin_unlock_irqrestore(lock, flags);
- 
- 	do_tstamp = false;
- 
-@@ -382,16 +417,20 @@ static bool enetc_clean_tx_ring(struct e
- 			tx_swbd = tx_ring->tx_swbd;
- 		}
- 
-+		spin_lock_irqsave(lock, flags);
-+
- 		/* BD iteration loop end */
- 		if (is_eof) {
- 			tx_frm_cnt++;
- 			/* re-arm interrupt source */
--			enetc_wr_reg(tx_ring->idr, BIT(tx_ring->index) |
--				     BIT(16 + tx_ring->index));
-+			enetc_wr_reg_hot(tx_ring->idr, BIT(tx_ring->index) |
-+					 BIT(16 + tx_ring->index));
- 		}
- 
- 		if (unlikely(!bds_to_clean))
- 			bds_to_clean = enetc_bd_ready_count(tx_ring, i);
-+
-+		spin_unlock_irqrestore(lock, flags);
- 	}
- 
- 	tx_ring->next_to_clean = i;
-@@ -470,13 +509,14 @@ static int enetc_refill_rx_ring(struct e
- 		rx_ring->next_to_alloc = i; /* keep track from page reuse */
- 		rx_ring->next_to_use = i;
- 		/* update ENETC's consumer index */
--		enetc_wr_reg(rx_ring->rcir, i);
-+		enetc_wr_reg_hot(rx_ring->rcir, i);
- 	}
- 
- 	return j;
- }
- 
- #ifdef CONFIG_FSL_ENETC_HW_TIMESTAMPING
-+/* Must be called with &enetc_gregs spinlock held */
- static void enetc_get_rx_tstamp(struct net_device *ndev,
- 				union enetc_rx_bd *rxbd,
- 				struct sk_buff *skb)
-@@ -488,8 +528,8 @@ static void enetc_get_rx_tstamp(struct n
- 	u64 tstamp;
- 
- 	if (le16_to_cpu(rxbd->r.flags) & ENETC_RXBD_FLAG_TSTMP) {
--		lo = enetc_rd(hw, ENETC_SICTR0);
--		hi = enetc_rd(hw, ENETC_SICTR1);
-+		lo = enetc_rd_reg_hot(hw->reg + ENETC_SICTR0);
-+		hi = enetc_rd_reg_hot(hw->reg + ENETC_SICTR1);
- 		tstamp_lo = le32_to_cpu(rxbd->r.tstamp);
- 		if (lo <= tstamp_lo)
- 			hi -= 1;
-@@ -627,6 +667,12 @@ static int enetc_clean_rx_ring(struct en
- 	int rx_frm_cnt = 0, rx_byte_cnt = 0;
- 	int cleaned_cnt, i;
- 
-+	unsigned long flags;
-+	/* pointer to per-cpu ENETC lock for register access issue WA */
-+	spinlock_t *lock;
-+
-+	lock = this_cpu_ptr(&enetc_gregs);
-+
- 	cleaned_cnt = enetc_bd_unused(rx_ring);
- 	/* next descriptor to process */
- 	i = rx_ring->next_to_clean;
-@@ -637,6 +683,8 @@ static int enetc_clean_rx_ring(struct en
- 		u32 bd_status;
- 		u16 size;
- 
-+		spin_lock_irqsave(lock, flags);
-+
- 		if (cleaned_cnt >= ENETC_RXBD_BUNDLE) {
- 			int count = enetc_refill_rx_ring(rx_ring, cleaned_cnt);
- 
-@@ -645,15 +693,19 @@ static int enetc_clean_rx_ring(struct en
- 
- 		rxbd = ENETC_RXBD(*rx_ring, i);
- 		bd_status = le32_to_cpu(rxbd->r.lstatus);
--		if (!bd_status)
-+		if (!bd_status) {
-+			spin_unlock_irqrestore(lock, flags);
- 			break;
-+		}
- 
--		enetc_wr_reg(rx_ring->idr, BIT(rx_ring->index));
-+		enetc_wr_reg_hot(rx_ring->idr, BIT(rx_ring->index));
- 		dma_rmb(); /* for reading other rxbd fields */
- 		size = le16_to_cpu(rxbd->r.buf_len);
- 		skb = enetc_map_rx_buff_to_skb(rx_ring, i, size);
--		if (!skb)
-+		if (!skb) {
-+			spin_unlock_irqrestore(lock, flags);
- 			break;
-+		}
- 
- 		enetc_get_offloads(rx_ring, rxbd, skb);
- 
-@@ -667,6 +719,7 @@ static int enetc_clean_rx_ring(struct en
- 
- 		if (unlikely(bd_status &
- 			     ENETC_RXBD_LSTATUS(ENETC_RXBD_ERR_MASK))) {
-+			spin_unlock_irqrestore(lock, flags);
- 			dev_kfree_skb(skb);
- 			while (!(bd_status & ENETC_RXBD_LSTATUS_F)) {
- 				dma_rmb();
-@@ -710,6 +763,8 @@ static int enetc_clean_rx_ring(struct en
- 
- 		enetc_process_skb(rx_ring, skb);
- 
-+		spin_unlock_irqrestore(lock, flags);
-+
- 		napi_gro_receive(napi, skb);
- 
- 		rx_frm_cnt++;
---- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-@@ -327,8 +327,15 @@ struct enetc_hw {
- };
- 
- /* general register accessors */
--#define enetc_rd_reg(reg)	ioread32((reg))
--#define enetc_wr_reg(reg, val)	iowrite32((val), (reg))
-+#define enetc_rd_reg(reg)	enetc_rd_reg_wa((reg))
-+#define enetc_wr_reg(reg, val)	enetc_wr_reg_wa((reg), (val))
-+
-+/* accessors for data-path, due to MDIO issue on LS1028 these should be called
-+ * only under enetc_gregs per-cpu lock
-+ */
-+#define enetc_rd_reg_hot(reg)	ioread32((reg))
-+#define enetc_wr_reg_hot(reg, val)	iowrite32((val), (reg))
-+
- #ifdef ioread64
- #define enetc_rd_reg64(reg)	ioread64((reg))
- #else
-@@ -347,12 +354,102 @@ static inline u64 enetc_rd_reg64(void __
- }
- #endif
- 
-+extern DEFINE_PER_CPU(spinlock_t, enetc_gregs);
-+
-+static inline u32 enetc_rd_reg_wa(void *reg)
-+{
-+	unsigned long flags;
-+	/* pointer to per-cpu ENETC lock for register access issue WA */
-+	spinlock_t *lock;
-+	u32 val;
-+
-+	lock = this_cpu_ptr(&enetc_gregs);
-+	spin_lock_irqsave(lock, flags);
-+	val = ioread32(reg);
-+	spin_unlock_irqrestore(lock, flags);
-+
-+	return val;
-+}
-+
-+static inline void enetc_wr_reg_wa(void *reg, u32 val)
-+{
-+	unsigned long flags;
-+	/* pointer to per-cpu ENETC lock for register access issue WA */
-+	spinlock_t *lock;
-+
-+	lock = this_cpu_ptr(&enetc_gregs);
-+	spin_lock_irqsave(lock, flags);
-+	iowrite32(val, reg);
-+	spin_unlock_irqrestore(lock, flags);
-+}
-+
-+/* NR_CPUS=256 in ARM64 defconfig and using it as array size triggers stack
-+ * frame warnings for the functions below.  Use a custom define of 2 for now,
-+ * LS1028 has just two cores.
-+ */
-+#define ENETC_NR_CPU_LOCKS	2
-+
-+static inline u32 enetc_rd_reg_wa_single(void *reg)
-+{
-+	u32 val;
-+	int cpu;
-+	/* per-cpu ENETC lock array for register access issue WA */
-+	spinlock_t *lock[ENETC_NR_CPU_LOCKS];
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+	preempt_disable();
-+
-+	for_each_online_cpu(cpu) {
-+		lock[cpu] = per_cpu_ptr(&enetc_gregs, cpu);
-+		spin_lock(lock[cpu]);
-+	}
-+
-+	val = ioread32(reg);
-+
-+	for_each_online_cpu(cpu)
-+		spin_unlock(lock[cpu]);
-+	local_irq_restore(flags);
-+
-+	preempt_enable();
-+
-+	return val;
-+}
-+
-+static inline void enetc_wr_reg_wa_single(void *reg, u32 val)
-+{
-+	int cpu;
-+	/* per-cpu ENETC lock array for register access issue WA */
-+	spinlock_t *lock[ENETC_NR_CPU_LOCKS];
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+	preempt_disable();
-+
-+	for_each_online_cpu(cpu) {
-+		lock[cpu] = per_cpu_ptr(&enetc_gregs, cpu);
-+		spin_lock(lock[cpu]);
-+	}
-+
-+	iowrite32(val, reg);
-+
-+	for_each_online_cpu(cpu)
-+		spin_unlock(lock[cpu]);
-+	local_irq_restore(flags);
-+
-+	preempt_enable();
-+}
-+
- #define enetc_rd(hw, off)		enetc_rd_reg((hw)->reg + (off))
- #define enetc_wr(hw, off, val)		enetc_wr_reg((hw)->reg + (off), val)
- #define enetc_rd64(hw, off)		enetc_rd_reg64((hw)->reg + (off))
- /* port register accessors - PF only */
--#define enetc_port_rd(hw, off)		enetc_rd_reg((hw)->port + (off))
--#define enetc_port_wr(hw, off, val)	enetc_wr_reg((hw)->port + (off), val)
-+#define enetc_port_rd(hw, off)		enetc_rd_reg_wa((hw)->port + (off))
-+#define enetc_port_wr(hw, off, val)	enetc_wr_reg_wa((hw)->port + (off), val)
-+#define enetc_port_rd_single(hw, off)		enetc_rd_reg_wa_single(\
-+							(hw)->port + (off))
-+#define enetc_port_wr_single(hw, off, val)	enetc_wr_reg_wa_single(\
-+							(hw)->port + (off), val)
- /* global register accessors - PF only */
- #define enetc_global_rd(hw, off)	enetc_rd_reg((hw)->global + (off))
- #define enetc_global_wr(hw, off, val)	enetc_wr_reg((hw)->global + (off), val)
---- a/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
-@@ -16,13 +16,13 @@
- 
- static inline u32 _enetc_mdio_rd(struct enetc_mdio_priv *mdio_priv, int off)
- {
--	return enetc_port_rd(mdio_priv->hw, mdio_priv->mdio_base + off);
-+	return enetc_port_rd_single(mdio_priv->hw, mdio_priv->mdio_base + off);
- }
- 
- static inline void _enetc_mdio_wr(struct enetc_mdio_priv *mdio_priv, int off,
- 				  u32 val)
- {
--	enetc_port_wr(mdio_priv->hw, mdio_priv->mdio_base + off, val);
-+	enetc_port_wr_single(mdio_priv->hw, mdio_priv->mdio_base + off, val);
- }
- 
- #define enetc_mdio_rd(mdio_priv, off) \
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-@@ -1076,6 +1076,9 @@ static void enetc_pf_remove(struct pci_d
- 	enetc_pci_remove(pdev);
- }
- 
-+DEFINE_PER_CPU(spinlock_t, enetc_gregs);
-+EXPORT_PER_CPU_SYMBOL(enetc_gregs);
-+
- static const struct pci_device_id enetc_pf_id_table[] = {
- 	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, ENETC_DEV_ID_PF) },
- 	{ 0, } /* End of table. */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0235-enetc-Clean-up-of-ehtool-stats-len.patch b/target/linux/layerscape/patches-5.4/701-net-0235-enetc-Clean-up-of-ehtool-stats-len.patch
deleted file mode 100644
index 1602feb3bd..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0235-enetc-Clean-up-of-ehtool-stats-len.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From a5e4a018cf5c7ed9709141c41ba7b262aa79870d Mon Sep 17 00:00:00 2001
-From: Claudiu Manoil <claudiu.manoil@nxp.com>
-Date: Tue, 22 Oct 2019 20:23:38 +0300
-Subject: [PATCH] enetc: Clean up of ehtool stats len
-
-Just refactoring stats len code to make it easier to
-add new stats counters.
-
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
----
- drivers/net/ethernet/freescale/enetc/enetc_ethtool.c | 20 +++++++++++++-------
- 1 file changed, 13 insertions(+), 7 deletions(-)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
-@@ -199,15 +199,21 @@ static const char tx_ring_stats[][ETH_GS
- static int enetc_get_sset_count(struct net_device *ndev, int sset)
- {
- 	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	int len;
- 
--	if (sset == ETH_SS_STATS)
--		return ARRAY_SIZE(enetc_si_counters) +
--			ARRAY_SIZE(tx_ring_stats) * priv->num_tx_rings +
--			ARRAY_SIZE(rx_ring_stats) * priv->num_rx_rings +
--			(enetc_si_is_pf(priv->si) ?
--			ARRAY_SIZE(enetc_port_counters) : 0);
-+	if (sset != ETH_SS_STATS)
-+		return -EOPNOTSUPP;
- 
--	return -EOPNOTSUPP;
-+	len = ARRAY_SIZE(enetc_si_counters) +
-+	      ARRAY_SIZE(tx_ring_stats) * priv->num_tx_rings +
-+	      ARRAY_SIZE(rx_ring_stats) * priv->num_rx_rings;
-+
-+	if (!enetc_si_is_pf(priv->si))
-+		return len;
-+
-+	len += ARRAY_SIZE(enetc_port_counters);
-+
-+	return len;
- }
- 
- static void enetc_get_strings(struct net_device *ndev, u32 stringset, u8 *data)
diff --git a/target/linux/layerscape/patches-5.4/701-net-0236-enetc-Replace-enetc_gregs-with-a-readers-writer-lock.patch b/target/linux/layerscape/patches-5.4/701-net-0236-enetc-Replace-enetc_gregs-with-a-readers-writer-lock.patch
deleted file mode 100644
index cb164d4ffb..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0236-enetc-Replace-enetc_gregs-with-a-readers-writer-lock.patch
+++ /dev/null
@@ -1,385 +0,0 @@
-From 659f899773f9f3fdc8325f61acc1017dd838126c Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Thu, 14 Nov 2019 17:30:50 +0200
-Subject: [PATCH] enetc: Replace enetc_gregs with a readers-writer lock
-
-The LS1028A MDIO errata tells us that any MDIO register access must not
-be concurrent with any other ENETC register access.
-
-That has been handled so far by a number of per-CPU spinlocks over the
-ENETC register map. This came as an optimization over a single spinlock,
-because the regular register accesses can still be concurrent with one
-another, as long as they aren't concurrent with MDIO.
-
-But this logic is broken in RT, because the enetc_rd_reg_wa and
-enetc_wr_reg_wa functions can be preempted in any context, and when they
-resume they may not run on the same CPU.
-
-This renders the logic to take the per-CPU spinlock pointless, since the
-spinlock may not be the correct one (corresponding to this CPU) after
-preemption has occurred.
-
-The following splat is telling us the same thing:
-
-[   19.073928] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-network/3423
-[   19.073932] caller is debug_smp_processor_id+0x1c/0x30
-[   19.073935] CPU: 1 PID: 3423 Comm: systemd-network Not tainted 4.19.68-rt26 #1
-[   19.073936] Hardware name: LS1028A RDB Board (DT)
-[   19.073938] Call trace:
-[   19.073940]  dump_backtrace+0x0/0x1a0
-[   19.073942]  show_stack+0x24/0x30
-[   19.073945]  dump_stack+0x9c/0xdc
-[   19.073948]  check_preemption_disabled+0xe0/0x100
-[   19.073951]  debug_smp_processor_id+0x1c/0x30
-[   19.073954]  enetc_open+0x1b0/0xbc0
-[   19.073957]  __dev_open+0xdc/0x160
-[   19.073960]  __dev_change_flags+0x160/0x1d0
-[   19.073963]  dev_change_flags+0x34/0x70
-[   19.073966]  do_setlink+0x2a0/0xcd0
-[   19.073969]  rtnl_setlink+0xe4/0x140
-[   19.073972]  rtnetlink_rcv_msg+0x18c/0x500
-[   19.073975]  netlink_rcv_skb+0x60/0x120
-[   19.073978]  rtnetlink_rcv+0x28/0x40
-[   19.073982]  netlink_unicast+0x194/0x210
-[   19.073985]  netlink_sendmsg+0x194/0x330
-[   19.073987]  sock_sendmsg+0x34/0x50
-[   19.073990]  __sys_sendto+0xe4/0x150
-[   19.073992]  __arm64_sys_sendto+0x30/0x40
-[   19.073996]  el0_svc_common+0xa4/0x1a0
-[   19.073999]  el0_svc_handler+0x38/0x80
-[   19.074002]  el0_svc+0x8/0xc
-
-But there already exists a spinlock optimized for the single writer,
-multiple readers case: the rwlock_t. The writer in this case is the MDIO
-access code (irrelevant whether that MDIO access is a register read or
-write), and the reader is everybody else.
-
-This patch also fixes two more existing bugs in the errata workaround:
-- The MDIO access code was not unlocking the per-CPU spinlocks in the
-  reverse order of their locking order.
-- The per-CPU spinlock array was not initialized.
-
-Fixes: 5ec0d668d62e ("enetc: WA for MDIO register access issue")
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
----
- drivers/net/ethernet/freescale/enetc/enetc.c    | 59 ++++++----------------
- drivers/net/ethernet/freescale/enetc/enetc_hw.h | 67 ++++---------------------
- drivers/net/ethernet/freescale/enetc/enetc_pf.c |  5 +-
- 3 files changed, 30 insertions(+), 101 deletions(-)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
-@@ -20,13 +20,8 @@ netdev_tx_t enetc_xmit(struct sk_buff *s
- {
- 	struct enetc_ndev_priv *priv = netdev_priv(ndev);
- 	struct enetc_bdr *tx_ring;
--	unsigned long flags;
--	/* pointer to per-cpu ENETC lock for register access issue WA */
--	spinlock_t *lock;
- 	int count;
- 
--	lock = this_cpu_ptr(&enetc_gregs);
--
- 	tx_ring = priv->tx_ring[skb->queue_mapping];
- 
- 	if (unlikely(skb_shinfo(skb)->nr_frags > ENETC_MAX_SKB_FRAGS))
-@@ -39,11 +34,9 @@ netdev_tx_t enetc_xmit(struct sk_buff *s
- 		return NETDEV_TX_BUSY;
- 	}
- 
--	spin_lock_irqsave(lock, flags);
--
-+	read_lock(&enetc_mdio_lock);
- 	count = enetc_map_tx_buffs(tx_ring, skb, priv->active_offloads);
--
--	spin_unlock_irqrestore(lock, flags);
-+	read_unlock(&enetc_mdio_lock);
- 
- 	if (unlikely(!count))
- 		goto drop_packet_err;
-@@ -259,13 +252,9 @@ dma_err:
- static irqreturn_t enetc_msix(int irq, void *data)
- {
- 	struct enetc_int_vector	*v = data;
--	unsigned long flags;
--	/* pointer to per-cpu ENETC lock for register access issue WA */
--	spinlock_t *lock;
- 	int i;
- 
--	lock = this_cpu_ptr(&enetc_gregs);
--	spin_lock_irqsave(lock, flags);
-+	read_lock(&enetc_mdio_lock);
- 
- 	/* disable interrupts */
- 	enetc_wr_reg_hot(v->rbier, 0);
-@@ -273,7 +262,7 @@ static irqreturn_t enetc_msix(int irq, v
- 	for_each_set_bit(i, &v->tx_rings_map, ENETC_MAX_NUM_TXQS)
- 		enetc_wr_reg_hot(v->tbier_base + ENETC_BDR_OFF(i), 0);
- 
--	spin_unlock_irqrestore(lock, flags);
-+	read_unlock(&enetc_mdio_lock);
- 
- 	napi_schedule_irqoff(&v->napi);
- 
-@@ -289,9 +278,6 @@ static int enetc_poll(struct napi_struct
- 	struct enetc_int_vector
- 		*v = container_of(napi, struct enetc_int_vector, napi);
- 	bool complete = true;
--	unsigned long flags;
--	/* pointer to per-cpu ENETC lock for register access issue WA */
--	spinlock_t *lock;
- 	int work_done;
- 	int i;
- 
-@@ -308,8 +294,7 @@ static int enetc_poll(struct napi_struct
- 
- 	napi_complete_done(napi, work_done);
- 
--	lock = this_cpu_ptr(&enetc_gregs);
--	spin_lock_irqsave(lock, flags);
-+	read_lock(&enetc_mdio_lock);
- 
- 	/* enable interrupts */
- 	enetc_wr_reg_hot(v->rbier, ENETC_RBIER_RXTIE);
-@@ -318,7 +303,7 @@ static int enetc_poll(struct napi_struct
- 		enetc_wr_reg_hot(v->tbier_base + ENETC_BDR_OFF(i),
- 				 ENETC_TBIER_TXTIE);
- 
--	spin_unlock_irqrestore(lock, flags);
-+	read_unlock(&enetc_mdio_lock);
- 
- 	return work_done;
- }
-@@ -363,18 +348,12 @@ static bool enetc_clean_tx_ring(struct e
- 	bool do_tstamp;
- 	u64 tstamp = 0;
- 
--	unsigned long flags;
--	/* pointer to per-cpu ENETC lock for register access issue WA */
--	spinlock_t *lock;
--
--	lock = this_cpu_ptr(&enetc_gregs);
--
- 	i = tx_ring->next_to_clean;
- 	tx_swbd = &tx_ring->tx_swbd[i];
- 
--	spin_lock_irqsave(lock, flags);
-+	read_lock(&enetc_mdio_lock);
- 	bds_to_clean = enetc_bd_ready_count(tx_ring, i);
--	spin_unlock_irqrestore(lock, flags);
-+	read_unlock(&enetc_mdio_lock);
- 
- 	do_tstamp = false;
- 
-@@ -417,7 +396,7 @@ static bool enetc_clean_tx_ring(struct e
- 			tx_swbd = tx_ring->tx_swbd;
- 		}
- 
--		spin_lock_irqsave(lock, flags);
-+		read_lock(&enetc_mdio_lock);
- 
- 		/* BD iteration loop end */
- 		if (is_eof) {
-@@ -430,7 +409,7 @@ static bool enetc_clean_tx_ring(struct e
- 		if (unlikely(!bds_to_clean))
- 			bds_to_clean = enetc_bd_ready_count(tx_ring, i);
- 
--		spin_unlock_irqrestore(lock, flags);
-+		read_unlock(&enetc_mdio_lock);
- 	}
- 
- 	tx_ring->next_to_clean = i;
-@@ -516,7 +495,7 @@ static int enetc_refill_rx_ring(struct e
- }
- 
- #ifdef CONFIG_FSL_ENETC_HW_TIMESTAMPING
--/* Must be called with &enetc_gregs spinlock held */
-+/* Must be called with the read-side enetc_mdio_lock held */
- static void enetc_get_rx_tstamp(struct net_device *ndev,
- 				union enetc_rx_bd *rxbd,
- 				struct sk_buff *skb)
-@@ -667,12 +646,6 @@ static int enetc_clean_rx_ring(struct en
- 	int rx_frm_cnt = 0, rx_byte_cnt = 0;
- 	int cleaned_cnt, i;
- 
--	unsigned long flags;
--	/* pointer to per-cpu ENETC lock for register access issue WA */
--	spinlock_t *lock;
--
--	lock = this_cpu_ptr(&enetc_gregs);
--
- 	cleaned_cnt = enetc_bd_unused(rx_ring);
- 	/* next descriptor to process */
- 	i = rx_ring->next_to_clean;
-@@ -683,7 +656,7 @@ static int enetc_clean_rx_ring(struct en
- 		u32 bd_status;
- 		u16 size;
- 
--		spin_lock_irqsave(lock, flags);
-+		read_lock(&enetc_mdio_lock);
- 
- 		if (cleaned_cnt >= ENETC_RXBD_BUNDLE) {
- 			int count = enetc_refill_rx_ring(rx_ring, cleaned_cnt);
-@@ -694,7 +667,7 @@ static int enetc_clean_rx_ring(struct en
- 		rxbd = ENETC_RXBD(*rx_ring, i);
- 		bd_status = le32_to_cpu(rxbd->r.lstatus);
- 		if (!bd_status) {
--			spin_unlock_irqrestore(lock, flags);
-+			read_unlock(&enetc_mdio_lock);
- 			break;
- 		}
- 
-@@ -703,7 +676,7 @@ static int enetc_clean_rx_ring(struct en
- 		size = le16_to_cpu(rxbd->r.buf_len);
- 		skb = enetc_map_rx_buff_to_skb(rx_ring, i, size);
- 		if (!skb) {
--			spin_unlock_irqrestore(lock, flags);
-+			read_unlock(&enetc_mdio_lock);
- 			break;
- 		}
- 
-@@ -719,7 +692,7 @@ static int enetc_clean_rx_ring(struct en
- 
- 		if (unlikely(bd_status &
- 			     ENETC_RXBD_LSTATUS(ENETC_RXBD_ERR_MASK))) {
--			spin_unlock_irqrestore(lock, flags);
-+			read_unlock(&enetc_mdio_lock);
- 			dev_kfree_skb(skb);
- 			while (!(bd_status & ENETC_RXBD_LSTATUS_F)) {
- 				dma_rmb();
-@@ -763,7 +736,7 @@ static int enetc_clean_rx_ring(struct en
- 
- 		enetc_process_skb(rx_ring, skb);
- 
--		spin_unlock_irqrestore(lock, flags);
-+		read_unlock(&enetc_mdio_lock);
- 
- 		napi_gro_receive(napi, skb);
- 
---- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-@@ -331,7 +331,7 @@ struct enetc_hw {
- #define enetc_wr_reg(reg, val)	enetc_wr_reg_wa((reg), (val))
- 
- /* accessors for data-path, due to MDIO issue on LS1028 these should be called
-- * only under enetc_gregs per-cpu lock
-+ * only under the rwlock_t enetc_mdio_lock
-  */
- #define enetc_rd_reg_hot(reg)	ioread32((reg))
- #define enetc_wr_reg_hot(reg, val)	iowrite32((val), (reg))
-@@ -354,90 +354,45 @@ static inline u64 enetc_rd_reg64(void __
- }
- #endif
- 
--extern DEFINE_PER_CPU(spinlock_t, enetc_gregs);
-+extern rwlock_t enetc_mdio_lock;
- 
- static inline u32 enetc_rd_reg_wa(void *reg)
- {
--	unsigned long flags;
--	/* pointer to per-cpu ENETC lock for register access issue WA */
--	spinlock_t *lock;
- 	u32 val;
- 
--	lock = this_cpu_ptr(&enetc_gregs);
--	spin_lock_irqsave(lock, flags);
-+	read_lock(&enetc_mdio_lock);
- 	val = ioread32(reg);
--	spin_unlock_irqrestore(lock, flags);
-+	read_unlock(&enetc_mdio_lock);
- 
- 	return val;
- }
- 
- static inline void enetc_wr_reg_wa(void *reg, u32 val)
- {
--	unsigned long flags;
--	/* pointer to per-cpu ENETC lock for register access issue WA */
--	spinlock_t *lock;
--
--	lock = this_cpu_ptr(&enetc_gregs);
--	spin_lock_irqsave(lock, flags);
-+	read_lock(&enetc_mdio_lock);
- 	iowrite32(val, reg);
--	spin_unlock_irqrestore(lock, flags);
-+	read_unlock(&enetc_mdio_lock);
- }
- 
--/* NR_CPUS=256 in ARM64 defconfig and using it as array size triggers stack
-- * frame warnings for the functions below.  Use a custom define of 2 for now,
-- * LS1028 has just two cores.
-- */
--#define ENETC_NR_CPU_LOCKS	2
--
- static inline u32 enetc_rd_reg_wa_single(void *reg)
- {
--	u32 val;
--	int cpu;
--	/* per-cpu ENETC lock array for register access issue WA */
--	spinlock_t *lock[ENETC_NR_CPU_LOCKS];
- 	unsigned long flags;
-+	u32 val;
- 
--	local_irq_save(flags);
--	preempt_disable();
--
--	for_each_online_cpu(cpu) {
--		lock[cpu] = per_cpu_ptr(&enetc_gregs, cpu);
--		spin_lock(lock[cpu]);
--	}
--
-+	write_lock_irqsave(&enetc_mdio_lock, flags);
- 	val = ioread32(reg);
--
--	for_each_online_cpu(cpu)
--		spin_unlock(lock[cpu]);
--	local_irq_restore(flags);
--
--	preempt_enable();
-+	write_unlock_irqrestore(&enetc_mdio_lock, flags);
- 
- 	return val;
- }
- 
- static inline void enetc_wr_reg_wa_single(void *reg, u32 val)
- {
--	int cpu;
--	/* per-cpu ENETC lock array for register access issue WA */
--	spinlock_t *lock[ENETC_NR_CPU_LOCKS];
- 	unsigned long flags;
- 
--	local_irq_save(flags);
--	preempt_disable();
--
--	for_each_online_cpu(cpu) {
--		lock[cpu] = per_cpu_ptr(&enetc_gregs, cpu);
--		spin_lock(lock[cpu]);
--	}
--
-+	write_lock_irqsave(&enetc_mdio_lock, flags);
- 	iowrite32(val, reg);
--
--	for_each_online_cpu(cpu)
--		spin_unlock(lock[cpu]);
--	local_irq_restore(flags);
--
--	preempt_enable();
-+	write_unlock_irqrestore(&enetc_mdio_lock, flags);
- }
- 
- #define enetc_rd(hw, off)		enetc_rd_reg((hw)->reg + (off))
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-@@ -1076,8 +1076,9 @@ static void enetc_pf_remove(struct pci_d
- 	enetc_pci_remove(pdev);
- }
- 
--DEFINE_PER_CPU(spinlock_t, enetc_gregs);
--EXPORT_PER_CPU_SYMBOL(enetc_gregs);
-+/* Lock for MDIO access errata on LS1028A */
-+DEFINE_RWLOCK(enetc_mdio_lock);
-+EXPORT_SYMBOL_GPL(enetc_mdio_lock);
- 
- static const struct pci_device_id enetc_pf_id_table[] = {
- 	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, ENETC_DEV_ID_PF) },
diff --git a/target/linux/layerscape/patches-5.4/701-net-0237-enetc-Remove-mdio-bus-on-PF-probe-error-path.patch b/target/linux/layerscape/patches-5.4/701-net-0237-enetc-Remove-mdio-bus-on-PF-probe-error-path.patch
deleted file mode 100644
index 064621eaea..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0237-enetc-Remove-mdio-bus-on-PF-probe-error-path.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 73204b342fbee1fd9364365c1213815cc715eee2 Mon Sep 17 00:00:00 2001
-From: Claudiu Manoil <claudiu.manoil@nxp.com>
-Date: Thu, 14 Nov 2019 16:22:39 +0200
-Subject: [PATCH] enetc: Remove mdio bus on PF probe error path
-
-Fixes following kernel panic on the probing error
-path, when pci=nomsi bootarg is used (which is
-not supporrted by the enetc dirver):
-
-fsl_enetc 0000:00:00.0: MSIX alloc failed
-------------[ cut here ]------------
-kernel BUG at drivers/net/phy/mdio_bus.c:487!
-Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
-Modules linked in:
-Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____))
-CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.68-00004-g85dc4876e6e6 #1
-Hardware name: LS1028A RDB Board (DT)
-pstate: 80000005 (Nzcv daif -PAN -UAO)
-pc : mdiobus_free+0x5c/0x60
-lr : _devm_mdiobus_free+0x20/0x30
-[...]
-Call trace:
- mdiobus_free+0x5c/0x60
- _devm_mdiobus_free+0x20/0x30
- release_nodes+0x148/0x238
- devres_release_all+0x3c/0x68
- really_probe+0x90/0x2a0
- driver_probe_device+0x5c/0x100
- __driver_attach+0xf0/0xf8
- bus_for_each_dev+0x84/0xd8
- driver_attach+0x30/0x40
- bus_add_driver+0x1c4/0x230
- driver_register+0x64/0x110
- __pci_register_driver+0x58/0x68
- enetc_pf_driver_init+0x28/0x30
- do_one_initcall+0x54/0x268
- kernel_init_freeable+0x2d0/0x37c
- kernel_init+0x18/0x118
- ret_from_fork+0x10/0x1c
-Code: 97e0dd79 f9400bf3 a8c27bfd d65f03c0 (d4210000)
----[ end trace 1e4e5729f059b773 ]---
-
-Fixes: ebfcb23d62ab ("enetc: Add ENETC PF level external MDIO support")
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
----
- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-@@ -1041,6 +1041,7 @@ err_alloc_si_res:
- 	si->ndev = NULL;
- 	free_netdev(ndev);
- err_alloc_netdev:
-+	enetc_mdio_remove(pf);
- 	enetc_of_put_phy(pf);
- err_device_disabled:
- err_map_pf_space:
diff --git a/target/linux/layerscape/patches-5.4/701-net-0238-net-mscc-ocelot-break-apart-ocelot_vlan_port_apply.patch b/target/linux/layerscape/patches-5.4/701-net-0238-net-mscc-ocelot-break-apart-ocelot_vlan_port_apply.patch
deleted file mode 100644
index f3db7da458..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0238-net-mscc-ocelot-break-apart-ocelot_vlan_port_apply.patch
+++ /dev/null
@@ -1,314 +0,0 @@
-From d00ac78e74e433109307f365ba90d34cd73aaf20 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Sat, 9 Nov 2019 15:02:47 +0200
-Subject: [PATCH] net: mscc: ocelot: break apart ocelot_vlan_port_apply
-
-This patch transforms the ocelot_vlan_port_apply function ("apply
-what?") into 3 standalone functions:
-
-- ocelot_port_vlan_filtering
-- ocelot_port_set_native_vlan
-- ocelot_port_set_pvid
-
-These functions have a prototype that is better aligned to the DSA API.
-
-The function also had some static initialization (TPID, drop frames with
-multicast source MAC) which was not being changed from any place, so
-that was just moved to ocelot_probe_port (one of the 6 callers of
-ocelot_vlan_port_apply).
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 168 ++++++++++++++++++++++---------------
- 1 file changed, 100 insertions(+), 68 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -185,65 +185,97 @@ static void ocelot_vlan_mode(struct ocel
- 	ocelot_write(ocelot, val, ANA_VLANMASK);
- }
- 
--static void ocelot_vlan_port_apply(struct ocelot *ocelot,
--				   struct ocelot_port *port)
-+static void ocelot_port_vlan_filtering(struct ocelot *ocelot, int port,
-+				       bool vlan_aware)
- {
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
- 	u32 val;
- 
--	/* Ingress clasification (ANA_PORT_VLAN_CFG) */
--	/* Default vlan to clasify for untagged frames (may be zero) */
--	val = ANA_PORT_VLAN_CFG_VLAN_VID(port->pvid);
--	if (port->vlan_aware)
--		val |= ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA |
--		       ANA_PORT_VLAN_CFG_VLAN_POP_CNT(1);
--
-+	if (vlan_aware)
-+		val = ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA |
-+		      ANA_PORT_VLAN_CFG_VLAN_POP_CNT(1);
-+	else
-+		val = 0;
- 	ocelot_rmw_gix(ocelot, val,
--		       ANA_PORT_VLAN_CFG_VLAN_VID_M |
- 		       ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA |
- 		       ANA_PORT_VLAN_CFG_VLAN_POP_CNT_M,
--		       ANA_PORT_VLAN_CFG, port->chip_port);
-+		       ANA_PORT_VLAN_CFG, port);
- 
--	/* Drop frames with multicast source address */
--	val = ANA_PORT_DROP_CFG_DROP_MC_SMAC_ENA;
--	if (port->vlan_aware && !port->vid)
-+	if (vlan_aware && !ocelot_port->vid)
- 		/* If port is vlan-aware and tagged, drop untagged and priority
- 		 * tagged frames.
- 		 */
--		val |= ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA |
-+		val = ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA |
-+		      ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA |
-+		      ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA;
-+	else
-+		val = 0;
-+	ocelot_rmw_gix(ocelot, val,
-+		       ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA |
- 		       ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA |
--		       ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA;
--	ocelot_write_gix(ocelot, val, ANA_PORT_DROP_CFG, port->chip_port);
--
--	/* Egress configuration (REW_TAG_CFG): VLAN tag type to 8021Q. */
--	val = REW_TAG_CFG_TAG_TPID_CFG(0);
-+		       ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA,
-+		       ANA_PORT_DROP_CFG, port);
- 
--	if (port->vlan_aware) {
--		if (port->vid)
-+	if (vlan_aware) {
-+		if (ocelot_port->vid)
- 			/* Tag all frames except when VID == DEFAULT_VLAN */
- 			val |= REW_TAG_CFG_TAG_CFG(1);
- 		else
- 			/* Tag all frames */
- 			val |= REW_TAG_CFG_TAG_CFG(3);
-+	} else {
-+		/* Port tagging disabled. */
-+		val = REW_TAG_CFG_TAG_CFG(0);
- 	}
- 	ocelot_rmw_gix(ocelot, val,
--		       REW_TAG_CFG_TAG_TPID_CFG_M |
- 		       REW_TAG_CFG_TAG_CFG_M,
--		       REW_TAG_CFG, port->chip_port);
-+		       REW_TAG_CFG, port);
- 
--	/* Set default VLAN and tag type to 8021Q. */
--	val = REW_PORT_VLAN_CFG_PORT_TPID(ETH_P_8021Q) |
--	      REW_PORT_VLAN_CFG_PORT_VID(port->vid);
--	ocelot_rmw_gix(ocelot, val,
--		       REW_PORT_VLAN_CFG_PORT_TPID_M |
-+	ocelot_port->vlan_aware = vlan_aware;
-+}
-+
-+static int ocelot_port_set_native_vlan(struct ocelot *ocelot, int port,
-+				       u16 vid)
-+{
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+
-+	if (ocelot_port->vid != vid) {
-+		/* Always permit deleting the native VLAN (vid = 0) */
-+		if (ocelot_port->vid && vid) {
-+			dev_err(ocelot->dev,
-+				"Port already has a native VLAN: %d\n",
-+				ocelot_port->vid);
-+			return -EBUSY;
-+		}
-+		ocelot_port->vid = vid;
-+	}
-+
-+	ocelot_rmw_gix(ocelot, REW_PORT_VLAN_CFG_PORT_VID(vid),
- 		       REW_PORT_VLAN_CFG_PORT_VID_M,
--		       REW_PORT_VLAN_CFG, port->chip_port);
-+		       REW_PORT_VLAN_CFG, port);
-+
-+	return 0;
-+}
-+
-+/* Default vlan to clasify for untagged frames (may be zero) */
-+static void ocelot_port_set_pvid(struct ocelot *ocelot, int port, u16 pvid)
-+{
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+
-+	ocelot_rmw_gix(ocelot,
-+		       ANA_PORT_VLAN_CFG_VLAN_VID(pvid),
-+		       ANA_PORT_VLAN_CFG_VLAN_VID_M,
-+		       ANA_PORT_VLAN_CFG, port);
-+
-+	ocelot_port->pvid = pvid;
- }
- 
- static int ocelot_vlan_vid_add(struct net_device *dev, u16 vid, bool pvid,
- 			       bool untagged)
- {
--	struct ocelot_port *port = netdev_priv(dev);
--	struct ocelot *ocelot = port->ocelot;
-+	struct ocelot_port *ocelot_port = netdev_priv(dev);
-+	struct ocelot *ocelot = ocelot_port->ocelot;
-+	int port = ocelot_port->chip_port;
- 	int ret;
- 
- 	/* Add the port MAC address to with the right VLAN information */
-@@ -251,35 +283,30 @@ static int ocelot_vlan_vid_add(struct ne
- 			  ENTRYTYPE_LOCKED);
- 
- 	/* Make the port a member of the VLAN */
--	ocelot->vlan_mask[vid] |= BIT(port->chip_port);
-+	ocelot->vlan_mask[vid] |= BIT(port);
- 	ret = ocelot_vlant_set_mask(ocelot, vid, ocelot->vlan_mask[vid]);
- 	if (ret)
- 		return ret;
- 
- 	/* Default ingress vlan classification */
- 	if (pvid)
--		port->pvid = vid;
-+		ocelot_port_set_pvid(ocelot, port, vid);
- 
- 	/* Untagged egress vlan clasification */
--	if (untagged && port->vid != vid) {
--		if (port->vid) {
--			dev_err(ocelot->dev,
--				"Port already has a native VLAN: %d\n",
--				port->vid);
--			return -EBUSY;
--		}
--		port->vid = vid;
-+	if (untagged) {
-+		ret = ocelot_port_set_native_vlan(ocelot, port, vid);
-+		if (ret)
-+			return ret;
- 	}
- 
--	ocelot_vlan_port_apply(ocelot, port);
--
- 	return 0;
- }
- 
- static int ocelot_vlan_vid_del(struct net_device *dev, u16 vid)
- {
--	struct ocelot_port *port = netdev_priv(dev);
--	struct ocelot *ocelot = port->ocelot;
-+	struct ocelot_port *ocelot_port = netdev_priv(dev);
-+	struct ocelot *ocelot = ocelot_port->ocelot;
-+	int port = ocelot_port->chip_port;
- 	int ret;
- 
- 	/* 8021q removes VID 0 on module unload for all interfaces
-@@ -293,20 +320,18 @@ static int ocelot_vlan_vid_del(struct ne
- 	ocelot_mact_forget(ocelot, dev->dev_addr, vid);
- 
- 	/* Stop the port from being a member of the vlan */
--	ocelot->vlan_mask[vid] &= ~BIT(port->chip_port);
-+	ocelot->vlan_mask[vid] &= ~BIT(port);
- 	ret = ocelot_vlant_set_mask(ocelot, vid, ocelot->vlan_mask[vid]);
- 	if (ret)
- 		return ret;
- 
- 	/* Ingress */
--	if (port->pvid == vid)
--		port->pvid = 0;
-+	if (ocelot_port->pvid == vid)
-+		ocelot_port_set_pvid(ocelot, port, 0);
- 
- 	/* Egress */
--	if (port->vid == vid)
--		port->vid = 0;
--
--	ocelot_vlan_port_apply(ocelot, port);
-+	if (ocelot_port->vid == vid)
-+		ocelot_port_set_native_vlan(ocelot, port, 0);
- 
- 	return 0;
- }
-@@ -1303,6 +1328,7 @@ static int ocelot_port_attr_set(struct n
- 				struct switchdev_trans *trans)
- {
- 	struct ocelot_port *ocelot_port = netdev_priv(dev);
-+	struct ocelot *ocelot = ocelot_port->ocelot;
- 	int err = 0;
- 
- 	switch (attr->id) {
-@@ -1314,8 +1340,8 @@ static int ocelot_port_attr_set(struct n
- 		ocelot_port_attr_ageing_set(ocelot_port, attr->u.ageing_time);
- 		break;
- 	case SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING:
--		ocelot_port->vlan_aware = attr->u.vlan_filtering;
--		ocelot_vlan_port_apply(ocelot_port->ocelot, ocelot_port);
-+		ocelot_port_vlan_filtering(ocelot, ocelot_port->chip_port,
-+					   attr->u.vlan_filtering);
- 		break;
- 	case SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED:
- 		ocelot_port_attr_mc_set(ocelot_port, !attr->u.mc_disabled);
-@@ -1517,20 +1543,20 @@ static int ocelot_port_bridge_join(struc
- 	return 0;
- }
- 
--static void ocelot_port_bridge_leave(struct ocelot_port *ocelot_port,
--				     struct net_device *bridge)
-+static int ocelot_port_bridge_leave(struct ocelot_port *ocelot_port,
-+				    struct net_device *bridge)
- {
- 	struct ocelot *ocelot = ocelot_port->ocelot;
-+	int port = ocelot_port->chip_port;
- 
--	ocelot->bridge_mask &= ~BIT(ocelot_port->chip_port);
-+	ocelot->bridge_mask &= ~BIT(port);
- 
- 	if (!ocelot->bridge_mask)
- 		ocelot->hw_bridge_dev = NULL;
- 
--	/* Clear bridge vlan settings before calling ocelot_vlan_port_apply */
--	ocelot_port->vlan_aware = 0;
--	ocelot_port->pvid = 0;
--	ocelot_port->vid = 0;
-+	ocelot_port_vlan_filtering(ocelot, port, 0);
-+	ocelot_port_set_pvid(ocelot, port, 0);
-+	return ocelot_port_set_native_vlan(ocelot, port, 0);
- }
- 
- static void ocelot_set_aggr_pgids(struct ocelot *ocelot)
-@@ -1684,11 +1710,8 @@ static int ocelot_netdevice_port_event(s
- 				err = ocelot_port_bridge_join(ocelot_port,
- 							      info->upper_dev);
- 			else
--				ocelot_port_bridge_leave(ocelot_port,
--							 info->upper_dev);
--
--			ocelot_vlan_port_apply(ocelot_port->ocelot,
--					       ocelot_port);
-+				err = ocelot_port_bridge_leave(ocelot_port,
-+							       info->upper_dev);
- 		}
- 		if (netif_is_lag_master(info->upper_dev)) {
- 			if (info->linking)
-@@ -2006,6 +2029,7 @@ int ocelot_probe_port(struct ocelot *oce
- {
- 	struct ocelot_port *ocelot_port;
- 	struct net_device *dev;
-+	u32 val;
- 	int err;
- 
- 	dev = alloc_etherdev(sizeof(struct ocelot_port));
-@@ -2041,7 +2065,15 @@ int ocelot_probe_port(struct ocelot *oce
- 	}
- 
- 	/* Basic L2 initialization */
--	ocelot_vlan_port_apply(ocelot, ocelot_port);
-+
-+	/* Drop frames with multicast source address */
-+	val = ANA_PORT_DROP_CFG_DROP_MC_SMAC_ENA;
-+	ocelot_rmw_gix(ocelot, val, val, ANA_PORT_DROP_CFG, port);
-+
-+	/* Set default VLAN and tag type to 8021Q. */
-+	ocelot_rmw_gix(ocelot, REW_PORT_VLAN_CFG_PORT_TPID(ETH_P_8021Q),
-+		       REW_PORT_VLAN_CFG_PORT_TPID_M,
-+		       REW_PORT_VLAN_CFG, port);
- 
- 	/* Enable vcap lookups */
- 	ocelot_vcap_enable(ocelot, ocelot_port);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0239-net-mscc-ocelot-break-apart-vlan-operations-into-oce.patch b/target/linux/layerscape/patches-5.4/701-net-0239-net-mscc-ocelot-break-apart-vlan-operations-into-oce.patch
deleted file mode 100644
index d2b2cfcc67..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0239-net-mscc-ocelot-break-apart-vlan-operations-into-oce.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From 829d9def89b452c4d13d15fd578dea524d9f8521 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Sat, 9 Nov 2019 15:02:48 +0200
-Subject: [PATCH] net: mscc: ocelot: break apart vlan operations into
- ocelot_vlan_{add, del}
-
-We need an implementation of these functions that is agnostic to the
-higher layer (switchdev or dsa).
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 60 ++++++++++++++++++++++++++------------
- 1 file changed, 42 insertions(+), 18 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -270,18 +270,11 @@ static void ocelot_port_set_pvid(struct
- 	ocelot_port->pvid = pvid;
- }
- 
--static int ocelot_vlan_vid_add(struct net_device *dev, u16 vid, bool pvid,
--			       bool untagged)
-+static int ocelot_vlan_add(struct ocelot *ocelot, int port, u16 vid, bool pvid,
-+			   bool untagged)
- {
--	struct ocelot_port *ocelot_port = netdev_priv(dev);
--	struct ocelot *ocelot = ocelot_port->ocelot;
--	int port = ocelot_port->chip_port;
- 	int ret;
- 
--	/* Add the port MAC address to with the right VLAN information */
--	ocelot_mact_learn(ocelot, PGID_CPU, dev->dev_addr, vid,
--			  ENTRYTYPE_LOCKED);
--
- 	/* Make the port a member of the VLAN */
- 	ocelot->vlan_mask[vid] |= BIT(port);
- 	ret = ocelot_vlant_set_mask(ocelot, vid, ocelot->vlan_mask[vid]);
-@@ -302,22 +295,29 @@ static int ocelot_vlan_vid_add(struct ne
- 	return 0;
- }
- 
--static int ocelot_vlan_vid_del(struct net_device *dev, u16 vid)
-+static int ocelot_vlan_vid_add(struct net_device *dev, u16 vid, bool pvid,
-+			       bool untagged)
- {
- 	struct ocelot_port *ocelot_port = netdev_priv(dev);
- 	struct ocelot *ocelot = ocelot_port->ocelot;
- 	int port = ocelot_port->chip_port;
- 	int ret;
- 
--	/* 8021q removes VID 0 on module unload for all interfaces
--	 * with VLAN filtering feature. We need to keep it to receive
--	 * untagged traffic.
--	 */
--	if (vid == 0)
--		return 0;
-+	ret = ocelot_vlan_add(ocelot, port, vid, pvid, untagged);
-+	if (ret)
-+		return ret;
- 
--	/* Del the port MAC address to with the right VLAN information */
--	ocelot_mact_forget(ocelot, dev->dev_addr, vid);
-+	/* Add the port MAC address to with the right VLAN information */
-+	ocelot_mact_learn(ocelot, PGID_CPU, dev->dev_addr, vid,
-+			  ENTRYTYPE_LOCKED);
-+
-+	return 0;
-+}
-+
-+static int ocelot_vlan_del(struct ocelot *ocelot, int port, u16 vid)
-+{
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+	int ret;
- 
- 	/* Stop the port from being a member of the vlan */
- 	ocelot->vlan_mask[vid] &= ~BIT(port);
-@@ -335,6 +335,30 @@ static int ocelot_vlan_vid_del(struct ne
- 
- 	return 0;
- }
-+
-+static int ocelot_vlan_vid_del(struct net_device *dev, u16 vid)
-+{
-+	struct ocelot_port *ocelot_port = netdev_priv(dev);
-+	struct ocelot *ocelot = ocelot_port->ocelot;
-+	int port = ocelot_port->chip_port;
-+	int ret;
-+
-+	/* 8021q removes VID 0 on module unload for all interfaces
-+	 * with VLAN filtering feature. We need to keep it to receive
-+	 * untagged traffic.
-+	 */
-+	if (vid == 0)
-+		return 0;
-+
-+	ret = ocelot_vlan_del(ocelot, port, vid);
-+	if (ret)
-+		return ret;
-+
-+	/* Del the port MAC address to with the right VLAN information */
-+	ocelot_mact_forget(ocelot, dev->dev_addr, vid);
-+
-+	return 0;
-+}
- 
- static void ocelot_vlan_init(struct ocelot *ocelot)
- {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0240-net-mscc-ocelot-break-out-fdb-operations-into-abstra.patch b/target/linux/layerscape/patches-5.4/701-net-0240-net-mscc-ocelot-break-out-fdb-operations-into-abstra.patch
deleted file mode 100644
index a6f81ba84b..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0240-net-mscc-ocelot-break-out-fdb-operations-into-abstra.patch
+++ /dev/null
@@ -1,251 +0,0 @@
-From 0d1866b8c6f17a55207be651a3b3b93879fbdf1f Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Sat, 9 Nov 2019 15:02:49 +0200
-Subject: [PATCH] net: mscc: ocelot: break out fdb operations into abstract
- implementations
-
-To be able to implement a DSA front-end over ocelot_fdb_add,
-ocelot_fdb_del, ocelot_fdb_dump, these need to have a simple function
-prototype that is independent of struct net_device, netlink skb, etc.
-
-So rename the ndo ops of the ocelot driver into
-ocelot_port_fdb_{add,del,dump}, and have them all call the abstract
-implementations. At the same time, refactor ocelot_port_fdb_do_dump into
-a function whose prototype is compatible with dsa_fdb_dump_cb_t, so that
-the do_dump implementations can live together and be called by the
-ocelot_fdb_dump through a function pointer.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 124 +++++++++++++++++++++++--------------
- 1 file changed, 78 insertions(+), 46 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -21,6 +21,7 @@
- #include <net/netevent.h>
- #include <net/rtnetlink.h>
- #include <net/switchdev.h>
-+#include <net/dsa.h>
- 
- #include "ocelot.h"
- #include "ocelot_ace.h"
-@@ -814,21 +815,18 @@ static void ocelot_get_stats64(struct ne
- 	stats->collisions = ocelot_read(ocelot, SYS_COUNT_TX_COLLISION);
- }
- 
--static int ocelot_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
--			  struct net_device *dev, const unsigned char *addr,
--			  u16 vid, u16 flags,
--			  struct netlink_ext_ack *extack)
-+static int ocelot_fdb_add(struct ocelot *ocelot, int port,
-+			  const unsigned char *addr, u16 vid)
- {
--	struct ocelot_port *port = netdev_priv(dev);
--	struct ocelot *ocelot = port->ocelot;
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
- 
- 	if (!vid) {
--		if (!port->vlan_aware)
-+		if (!ocelot_port->vlan_aware)
- 			/* If the bridge is not VLAN aware and no VID was
- 			 * provided, set it to pvid to ensure the MAC entry
- 			 * matches incoming untagged packets
- 			 */
--			vid = port->pvid;
-+			vid = ocelot_port->pvid;
- 		else
- 			/* If the bridge is VLAN aware a VID must be provided as
- 			 * otherwise the learnt entry wouldn't match any frame.
-@@ -836,20 +834,37 @@ static int ocelot_fdb_add(struct ndmsg *
- 			return -EINVAL;
- 	}
- 
--	return ocelot_mact_learn(ocelot, port->chip_port, addr, vid,
--				 ENTRYTYPE_LOCKED);
-+	return ocelot_mact_learn(ocelot, port, addr, vid, ENTRYTYPE_LOCKED);
- }
- 
--static int ocelot_fdb_del(struct ndmsg *ndm, struct nlattr *tb[],
--			  struct net_device *dev,
--			  const unsigned char *addr, u16 vid)
-+static int ocelot_port_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
-+			       struct net_device *dev,
-+			       const unsigned char *addr,
-+			       u16 vid, u16 flags,
-+			       struct netlink_ext_ack *extack)
- {
--	struct ocelot_port *port = netdev_priv(dev);
--	struct ocelot *ocelot = port->ocelot;
-+	struct ocelot_port *ocelot_port = netdev_priv(dev);
-+	struct ocelot *ocelot = ocelot_port->ocelot;
- 
-+	return ocelot_fdb_add(ocelot, ocelot_port->chip_port, addr, vid);
-+}
-+
-+static int ocelot_fdb_del(struct ocelot *ocelot, int port,
-+			  const unsigned char *addr, u16 vid)
-+{
- 	return ocelot_mact_forget(ocelot, addr, vid);
- }
- 
-+static int ocelot_port_fdb_del(struct ndmsg *ndm, struct nlattr *tb[],
-+			       struct net_device *dev,
-+			       const unsigned char *addr, u16 vid)
-+{
-+	struct ocelot_port *ocelot_port = netdev_priv(dev);
-+	struct ocelot *ocelot = ocelot_port->ocelot;
-+
-+	return ocelot_fdb_del(ocelot, ocelot_port->chip_port, addr, vid);
-+}
-+
- struct ocelot_dump_ctx {
- 	struct net_device *dev;
- 	struct sk_buff *skb;
-@@ -857,9 +872,10 @@ struct ocelot_dump_ctx {
- 	int idx;
- };
- 
--static int ocelot_fdb_do_dump(struct ocelot_mact_entry *entry,
--			      struct ocelot_dump_ctx *dump)
-+static int ocelot_port_fdb_do_dump(const unsigned char *addr, u16 vid,
-+				   bool is_static, void *data)
- {
-+	struct ocelot_dump_ctx *dump = data;
- 	u32 portid = NETLINK_CB(dump->cb->skb).portid;
- 	u32 seq = dump->cb->nlh->nlmsg_seq;
- 	struct nlmsghdr *nlh;
-@@ -880,12 +896,12 @@ static int ocelot_fdb_do_dump(struct oce
- 	ndm->ndm_flags   = NTF_SELF;
- 	ndm->ndm_type    = 0;
- 	ndm->ndm_ifindex = dump->dev->ifindex;
--	ndm->ndm_state   = NUD_REACHABLE;
-+	ndm->ndm_state   = is_static ? NUD_NOARP : NUD_REACHABLE;
- 
--	if (nla_put(dump->skb, NDA_LLADDR, ETH_ALEN, entry->mac))
-+	if (nla_put(dump->skb, NDA_LLADDR, ETH_ALEN, addr))
- 		goto nla_put_failure;
- 
--	if (entry->vid && nla_put_u16(dump->skb, NDA_VLAN, entry->vid))
-+	if (vid && nla_put_u16(dump->skb, NDA_VLAN, vid))
- 		goto nla_put_failure;
- 
- 	nlmsg_end(dump->skb, nlh);
-@@ -899,12 +915,11 @@ nla_put_failure:
- 	return -EMSGSIZE;
- }
- 
--static inline int ocelot_mact_read(struct ocelot_port *port, int row, int col,
--				   struct ocelot_mact_entry *entry)
-+static int ocelot_mact_read(struct ocelot *ocelot, int port, int row, int col,
-+			    struct ocelot_mact_entry *entry)
- {
--	struct ocelot *ocelot = port->ocelot;
--	char mac[ETH_ALEN];
- 	u32 val, dst, macl, mach;
-+	char mac[ETH_ALEN];
- 
- 	/* Set row and column to read from */
- 	ocelot_field_write(ocelot, ANA_TABLES_MACTINDX_M_INDEX, row);
-@@ -927,7 +942,7 @@ static inline int ocelot_mact_read(struc
- 	 * do not report it.
- 	 */
- 	dst = (val & ANA_TABLES_MACACCESS_DEST_IDX_M) >> 3;
--	if (dst != port->chip_port)
-+	if (dst != port)
- 		return -EINVAL;
- 
- 	/* Get the entry's MAC address and VLAN id */
-@@ -947,43 +962,60 @@ static inline int ocelot_mact_read(struc
- 	return 0;
- }
- 
--static int ocelot_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb,
--			   struct net_device *dev,
--			   struct net_device *filter_dev, int *idx)
-+static int ocelot_fdb_dump(struct ocelot *ocelot, int port,
-+			   dsa_fdb_dump_cb_t *cb, void *data)
- {
--	struct ocelot_port *port = netdev_priv(dev);
--	int i, j, ret = 0;
--	struct ocelot_dump_ctx dump = {
--		.dev = dev,
--		.skb = skb,
--		.cb = cb,
--		.idx = *idx,
--	};
--
--	struct ocelot_mact_entry entry;
-+	int i, j;
- 
- 	/* Loop through all the mac tables entries. There are 1024 rows of 4
- 	 * entries.
- 	 */
- 	for (i = 0; i < 1024; i++) {
- 		for (j = 0; j < 4; j++) {
--			ret = ocelot_mact_read(port, i, j, &entry);
-+			struct ocelot_mact_entry entry;
-+			bool is_static;
-+			int ret;
-+
-+			ret = ocelot_mact_read(ocelot, port, i, j, &entry);
- 			/* If the entry is invalid (wrong port, invalid...),
- 			 * skip it.
- 			 */
- 			if (ret == -EINVAL)
- 				continue;
- 			else if (ret)
--				goto end;
-+				return ret;
-+
-+			is_static = (entry.type == ENTRYTYPE_LOCKED);
- 
--			ret = ocelot_fdb_do_dump(&entry, &dump);
-+			ret = cb(entry.mac, entry.vid, is_static, data);
- 			if (ret)
--				goto end;
-+				return ret;
- 		}
- 	}
- 
--end:
-+	return 0;
-+}
-+
-+static int ocelot_port_fdb_dump(struct sk_buff *skb,
-+				struct netlink_callback *cb,
-+				struct net_device *dev,
-+				struct net_device *filter_dev, int *idx)
-+{
-+	struct ocelot_port *ocelot_port = netdev_priv(dev);
-+	struct ocelot *ocelot = ocelot_port->ocelot;
-+	struct ocelot_dump_ctx dump = {
-+		.dev = dev,
-+		.skb = skb,
-+		.cb = cb,
-+		.idx = *idx,
-+	};
-+	int ret;
-+
-+	ret = ocelot_fdb_dump(ocelot, ocelot_port->chip_port,
-+			      ocelot_port_fdb_do_dump, &dump);
-+
- 	*idx = dump.idx;
-+
- 	return ret;
- }
- 
-@@ -1123,9 +1155,9 @@ static const struct net_device_ops ocelo
- 	.ndo_get_phys_port_name		= ocelot_port_get_phys_port_name,
- 	.ndo_set_mac_address		= ocelot_port_set_mac_address,
- 	.ndo_get_stats64		= ocelot_get_stats64,
--	.ndo_fdb_add			= ocelot_fdb_add,
--	.ndo_fdb_del			= ocelot_fdb_del,
--	.ndo_fdb_dump			= ocelot_fdb_dump,
-+	.ndo_fdb_add			= ocelot_port_fdb_add,
-+	.ndo_fdb_del			= ocelot_port_fdb_del,
-+	.ndo_fdb_dump			= ocelot_port_fdb_dump,
- 	.ndo_vlan_rx_add_vid		= ocelot_vlan_rx_add_vid,
- 	.ndo_vlan_rx_kill_vid		= ocelot_vlan_rx_kill_vid,
- 	.ndo_set_features		= ocelot_set_features,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0241-net-mscc-ocelot-change-prototypes-of-hwtstamping-ioc.patch b/target/linux/layerscape/patches-5.4/701-net-0241-net-mscc-ocelot-change-prototypes-of-hwtstamping-ioc.patch
deleted file mode 100644
index 730e6a72ce..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0241-net-mscc-ocelot-change-prototypes-of-hwtstamping-ioc.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 1ba674f7023761476dc39b7b112b780bb86f2f66 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Sat, 9 Nov 2019 15:02:50 +0200
-Subject: [PATCH] net: mscc: ocelot: change prototypes of hwtstamping ioctls
-
-This is needed in order to present a simpler prototype to the DSA
-front-end of ocelot.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 25 +++++++++++++------------
- 1 file changed, 13 insertions(+), 12 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -1062,17 +1062,17 @@ static int ocelot_get_port_parent_id(str
- 	return 0;
- }
- 
--static int ocelot_hwstamp_get(struct ocelot_port *port, struct ifreq *ifr)
-+static int ocelot_hwstamp_get(struct ocelot *ocelot, int port,
-+			      struct ifreq *ifr)
- {
--	struct ocelot *ocelot = port->ocelot;
--
- 	return copy_to_user(ifr->ifr_data, &ocelot->hwtstamp_config,
- 			    sizeof(ocelot->hwtstamp_config)) ? -EFAULT : 0;
- }
- 
--static int ocelot_hwstamp_set(struct ocelot_port *port, struct ifreq *ifr)
-+static int ocelot_hwstamp_set(struct ocelot *ocelot, int port,
-+			      struct ifreq *ifr)
- {
--	struct ocelot *ocelot = port->ocelot;
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
- 	struct hwtstamp_config cfg;
- 
- 	if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg)))
-@@ -1085,16 +1085,16 @@ static int ocelot_hwstamp_set(struct oce
- 	/* Tx type sanity check */
- 	switch (cfg.tx_type) {
- 	case HWTSTAMP_TX_ON:
--		port->ptp_cmd = IFH_REW_OP_TWO_STEP_PTP;
-+		ocelot_port->ptp_cmd = IFH_REW_OP_TWO_STEP_PTP;
- 		break;
- 	case HWTSTAMP_TX_ONESTEP_SYNC:
- 		/* IFH_REW_OP_ONE_STEP_PTP updates the correctional field, we
- 		 * need to update the origin time.
- 		 */
--		port->ptp_cmd = IFH_REW_OP_ORIGIN_PTP;
-+		ocelot_port->ptp_cmd = IFH_REW_OP_ORIGIN_PTP;
- 		break;
- 	case HWTSTAMP_TX_OFF:
--		port->ptp_cmd = 0;
-+		ocelot_port->ptp_cmd = 0;
- 		break;
- 	default:
- 		return -ERANGE;
-@@ -1130,8 +1130,9 @@ static int ocelot_hwstamp_set(struct oce
- 
- static int ocelot_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
- {
--	struct ocelot_port *port = netdev_priv(dev);
--	struct ocelot *ocelot = port->ocelot;
-+	struct ocelot_port *ocelot_port = netdev_priv(dev);
-+	struct ocelot *ocelot = ocelot_port->ocelot;
-+	int port = ocelot_port->chip_port;
- 
- 	/* The function is only used for PTP operations for now */
- 	if (!ocelot->ptp)
-@@ -1139,9 +1140,9 @@ static int ocelot_ioctl(struct net_devic
- 
- 	switch (cmd) {
- 	case SIOCSHWTSTAMP:
--		return ocelot_hwstamp_set(port, ifr);
-+		return ocelot_hwstamp_set(ocelot, port, ifr);
- 	case SIOCGHWTSTAMP:
--		return ocelot_hwstamp_get(port, ifr);
-+		return ocelot_hwstamp_get(ocelot, port, ifr);
- 	default:
- 		return -EOPNOTSUPP;
- 	}
diff --git a/target/linux/layerscape/patches-5.4/701-net-0242-net-mscc-ocelot-change-prototypes-of-switchdev-port-.patch b/target/linux/layerscape/patches-5.4/701-net-0242-net-mscc-ocelot-change-prototypes-of-switchdev-port-.patch
deleted file mode 100644
index dc5847c528..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0242-net-mscc-ocelot-change-prototypes-of-switchdev-port-.patch
+++ /dev/null
@@ -1,192 +0,0 @@
-From 2a07ee2b9608e665872e7d83bebd3acb7e45c2e6 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Sat, 9 Nov 2019 15:02:51 +0200
-Subject: [PATCH] net: mscc: ocelot: change prototypes of switchdev port
- attribute handlers
-
-This is needed so that the Felix DSA front-end can call the Ocelot
-implementations.
-
-The implementation of the "mc_disabled" switchdev attribute has also
-been simplified by using the read-modify-write macro instead of
-open-coding that operation.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 88 +++++++++++++++++++-------------------
- 1 file changed, 45 insertions(+), 43 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -1282,26 +1282,20 @@ static const struct ethtool_ops ocelot_e
- 	.get_ts_info		= ocelot_get_ts_info,
- };
- 
--static int ocelot_port_attr_stp_state_set(struct ocelot_port *ocelot_port,
--					  struct switchdev_trans *trans,
--					  u8 state)
-+static void ocelot_bridge_stp_state_set(struct ocelot *ocelot, int port,
-+					u8 state)
- {
--	struct ocelot *ocelot = ocelot_port->ocelot;
- 	u32 port_cfg;
--	int port, i;
--
--	if (switchdev_trans_ph_prepare(trans))
--		return 0;
-+	int p, i;
- 
--	if (!(BIT(ocelot_port->chip_port) & ocelot->bridge_mask))
--		return 0;
-+	if (!(BIT(port) & ocelot->bridge_mask))
-+		return;
- 
--	port_cfg = ocelot_read_gix(ocelot, ANA_PORT_PORT_CFG,
--				   ocelot_port->chip_port);
-+	port_cfg = ocelot_read_gix(ocelot, ANA_PORT_PORT_CFG, port);
- 
- 	switch (state) {
- 	case BR_STATE_FORWARDING:
--		ocelot->bridge_fwd_mask |= BIT(ocelot_port->chip_port);
-+		ocelot->bridge_fwd_mask |= BIT(port);
- 		/* Fallthrough */
- 	case BR_STATE_LEARNING:
- 		port_cfg |= ANA_PORT_PORT_CFG_LEARN_ENA;
-@@ -1309,19 +1303,18 @@ static int ocelot_port_attr_stp_state_se
- 
- 	default:
- 		port_cfg &= ~ANA_PORT_PORT_CFG_LEARN_ENA;
--		ocelot->bridge_fwd_mask &= ~BIT(ocelot_port->chip_port);
-+		ocelot->bridge_fwd_mask &= ~BIT(port);
- 		break;
- 	}
- 
--	ocelot_write_gix(ocelot, port_cfg, ANA_PORT_PORT_CFG,
--			 ocelot_port->chip_port);
-+	ocelot_write_gix(ocelot, port_cfg, ANA_PORT_PORT_CFG, port);
- 
- 	/* Apply FWD mask. The loop is needed to add/remove the current port as
- 	 * a source for the other ports.
- 	 */
--	for (port = 0; port < ocelot->num_phys_ports; port++) {
--		if (ocelot->bridge_fwd_mask & BIT(port)) {
--			unsigned long mask = ocelot->bridge_fwd_mask & ~BIT(port);
-+	for (p = 0; p < ocelot->num_phys_ports; p++) {
-+		if (ocelot->bridge_fwd_mask & BIT(p)) {
-+			unsigned long mask = ocelot->bridge_fwd_mask & ~BIT(p);
- 
- 			for (i = 0; i < ocelot->num_phys_ports; i++) {
- 				unsigned long bond_mask = ocelot->lags[i];
-@@ -1329,7 +1322,7 @@ static int ocelot_port_attr_stp_state_se
- 				if (!bond_mask)
- 					continue;
- 
--				if (bond_mask & BIT(port)) {
-+				if (bond_mask & BIT(p)) {
- 					mask &= ~bond_mask;
- 					break;
- 				}
-@@ -1337,47 +1330,55 @@ static int ocelot_port_attr_stp_state_se
- 
- 			ocelot_write_rix(ocelot,
- 					 BIT(ocelot->num_phys_ports) | mask,
--					 ANA_PGID_PGID, PGID_SRC + port);
-+					 ANA_PGID_PGID, PGID_SRC + p);
- 		} else {
- 			/* Only the CPU port, this is compatible with link
- 			 * aggregation.
- 			 */
- 			ocelot_write_rix(ocelot,
- 					 BIT(ocelot->num_phys_ports),
--					 ANA_PGID_PGID, PGID_SRC + port);
-+					 ANA_PGID_PGID, PGID_SRC + p);
- 		}
- 	}
-+}
-+
-+static void ocelot_port_attr_stp_state_set(struct ocelot *ocelot, int port,
-+					   struct switchdev_trans *trans,
-+					   u8 state)
-+{
-+	if (switchdev_trans_ph_prepare(trans))
-+		return;
- 
--	return 0;
-+	ocelot_bridge_stp_state_set(ocelot, port, state);
- }
- 
--static void ocelot_port_attr_ageing_set(struct ocelot_port *ocelot_port,
-+static void ocelot_set_ageing_time(struct ocelot *ocelot, unsigned int msecs)
-+{
-+	ocelot_write(ocelot, ANA_AUTOAGE_AGE_PERIOD(msecs / 2),
-+		     ANA_AUTOAGE);
-+}
-+
-+static void ocelot_port_attr_ageing_set(struct ocelot *ocelot, int port,
- 					unsigned long ageing_clock_t)
- {
--	struct ocelot *ocelot = ocelot_port->ocelot;
- 	unsigned long ageing_jiffies = clock_t_to_jiffies(ageing_clock_t);
- 	u32 ageing_time = jiffies_to_msecs(ageing_jiffies) / 1000;
- 
--	ocelot_write(ocelot, ANA_AUTOAGE_AGE_PERIOD(ageing_time / 2),
--		     ANA_AUTOAGE);
-+	ocelot_set_ageing_time(ocelot, ageing_time);
- }
- 
--static void ocelot_port_attr_mc_set(struct ocelot_port *port, bool mc)
-+static void ocelot_port_attr_mc_set(struct ocelot *ocelot, int port, bool mc)
- {
--	struct ocelot *ocelot = port->ocelot;
--	u32 val = ocelot_read_gix(ocelot, ANA_PORT_CPU_FWD_CFG,
--				  port->chip_port);
-+	u32 cpu_fwd_mcast = ANA_PORT_CPU_FWD_CFG_CPU_IGMP_REDIR_ENA |
-+			    ANA_PORT_CPU_FWD_CFG_CPU_MLD_REDIR_ENA |
-+			    ANA_PORT_CPU_FWD_CFG_CPU_IPMC_CTRL_COPY_ENA;
-+	u32 val = 0;
- 
- 	if (mc)
--		val |= ANA_PORT_CPU_FWD_CFG_CPU_IGMP_REDIR_ENA |
--		       ANA_PORT_CPU_FWD_CFG_CPU_MLD_REDIR_ENA |
--		       ANA_PORT_CPU_FWD_CFG_CPU_IPMC_CTRL_COPY_ENA;
--	else
--		val &= ~(ANA_PORT_CPU_FWD_CFG_CPU_IGMP_REDIR_ENA |
--			 ANA_PORT_CPU_FWD_CFG_CPU_MLD_REDIR_ENA |
--			 ANA_PORT_CPU_FWD_CFG_CPU_IPMC_CTRL_COPY_ENA);
-+		val = cpu_fwd_mcast;
- 
--	ocelot_write_gix(ocelot, val, ANA_PORT_CPU_FWD_CFG, port->chip_port);
-+	ocelot_rmw_gix(ocelot, val, cpu_fwd_mcast,
-+		       ANA_PORT_CPU_FWD_CFG, port);
- }
- 
- static int ocelot_port_attr_set(struct net_device *dev,
-@@ -1386,22 +1387,23 @@ static int ocelot_port_attr_set(struct n
- {
- 	struct ocelot_port *ocelot_port = netdev_priv(dev);
- 	struct ocelot *ocelot = ocelot_port->ocelot;
-+	int port = ocelot_port->chip_port;
- 	int err = 0;
- 
- 	switch (attr->id) {
- 	case SWITCHDEV_ATTR_ID_PORT_STP_STATE:
--		ocelot_port_attr_stp_state_set(ocelot_port, trans,
-+		ocelot_port_attr_stp_state_set(ocelot, port, trans,
- 					       attr->u.stp_state);
- 		break;
- 	case SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME:
--		ocelot_port_attr_ageing_set(ocelot_port, attr->u.ageing_time);
-+		ocelot_port_attr_ageing_set(ocelot, port, attr->u.ageing_time);
- 		break;
- 	case SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING:
--		ocelot_port_vlan_filtering(ocelot, ocelot_port->chip_port,
-+		ocelot_port_vlan_filtering(ocelot, port,
- 					   attr->u.vlan_filtering);
- 		break;
- 	case SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED:
--		ocelot_port_attr_mc_set(ocelot_port, !attr->u.mc_disabled);
-+		ocelot_port_attr_mc_set(ocelot, port, !attr->u.mc_disabled);
- 		break;
- 	default:
- 		err = -EOPNOTSUPP;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0243-net-mscc-ocelot-refactor-struct-ocelot_port-out-of-f.patch b/target/linux/layerscape/patches-5.4/701-net-0243-net-mscc-ocelot-refactor-struct-ocelot_port-out-of-f.patch
deleted file mode 100644
index 8850f57103..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0243-net-mscc-ocelot-refactor-struct-ocelot_port-out-of-f.patch
+++ /dev/null
@@ -1,388 +0,0 @@
-From 9f374df14572a9b4fb0940d8d6721c930bc27da1 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Sat, 9 Nov 2019 15:02:52 +0200
-Subject: [PATCH] net: mscc: ocelot: refactor struct ocelot_port out of
- function prototypes
-
-The ocelot_port structure has a net_device embedded in it, which makes
-it unsuitable for leaving it in the driver implementation functions.
-
-Leave ocelot_flower.c untouched. In that file, ocelot_port is used as an
-interface to the tc shared blocks. That will be addressed in the next
-patch.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c        | 79 ++++++++++++++-----------------
- drivers/net/ethernet/mscc/ocelot_police.c | 36 +++++++-------
- drivers/net/ethernet/mscc/ocelot_police.h |  4 +-
- drivers/net/ethernet/mscc/ocelot_tc.c     |  5 +-
- 4 files changed, 59 insertions(+), 65 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -133,11 +133,11 @@ static void ocelot_mact_init(struct ocel
- 	ocelot_write(ocelot, MACACCESS_CMD_INIT, ANA_TABLES_MACACCESS);
- }
- 
--static void ocelot_vcap_enable(struct ocelot *ocelot, struct ocelot_port *port)
-+static void ocelot_vcap_enable(struct ocelot *ocelot, int port)
- {
- 	ocelot_write_gix(ocelot, ANA_PORT_VCAP_S2_CFG_S2_ENA |
- 			 ANA_PORT_VCAP_S2_CFG_S2_IP6_CFG(0xa),
--			 ANA_PORT_VCAP_S2_CFG, port->chip_port);
-+			 ANA_PORT_VCAP_S2_CFG, port);
- }
- 
- static inline u32 ocelot_vlant_read_vlanaccess(struct ocelot *ocelot)
-@@ -170,19 +170,17 @@ static int ocelot_vlant_set_mask(struct
- 	return ocelot_vlant_wait_for_completion(ocelot);
- }
- 
--static void ocelot_vlan_mode(struct ocelot_port *port,
-+static void ocelot_vlan_mode(struct ocelot *ocelot, int port,
- 			     netdev_features_t features)
- {
--	struct ocelot *ocelot = port->ocelot;
--	u8 p = port->chip_port;
- 	u32 val;
- 
- 	/* Filtering */
- 	val = ocelot_read(ocelot, ANA_VLANMASK);
- 	if (features & NETIF_F_HW_VLAN_CTAG_FILTER)
--		val |= BIT(p);
-+		val |= BIT(port);
- 	else
--		val &= ~BIT(p);
-+		val &= ~BIT(port);
- 	ocelot_write(ocelot, val, ANA_VLANMASK);
- }
- 
-@@ -1034,18 +1032,20 @@ static int ocelot_vlan_rx_kill_vid(struc
- static int ocelot_set_features(struct net_device *dev,
- 			       netdev_features_t features)
- {
--	struct ocelot_port *port = netdev_priv(dev);
- 	netdev_features_t changed = dev->features ^ features;
-+	struct ocelot_port *ocelot_port = netdev_priv(dev);
-+	struct ocelot *ocelot = ocelot_port->ocelot;
-+	int port = ocelot_port->chip_port;
- 
- 	if ((dev->features & NETIF_F_HW_TC) > (features & NETIF_F_HW_TC) &&
--	    port->tc.offload_cnt) {
-+	    ocelot_port->tc.offload_cnt) {
- 		netdev_err(dev,
- 			   "Cannot disable HW TC offload while offloads active\n");
- 		return -EBUSY;
- 	}
- 
- 	if (changed & NETIF_F_HW_VLAN_CTAG_FILTER)
--		ocelot_vlan_mode(port, features);
-+		ocelot_vlan_mode(ocelot, port, features);
- 
- 	return 0;
- }
-@@ -1583,11 +1583,9 @@ static int ocelot_port_obj_del(struct ne
- 	return ret;
- }
- 
--static int ocelot_port_bridge_join(struct ocelot_port *ocelot_port,
-+static int ocelot_port_bridge_join(struct ocelot *ocelot, int port,
- 				   struct net_device *bridge)
- {
--	struct ocelot *ocelot = ocelot_port->ocelot;
--
- 	if (!ocelot->bridge_mask) {
- 		ocelot->hw_bridge_dev = bridge;
- 	} else {
-@@ -1597,17 +1595,14 @@ static int ocelot_port_bridge_join(struc
- 			return -ENODEV;
- 	}
- 
--	ocelot->bridge_mask |= BIT(ocelot_port->chip_port);
-+	ocelot->bridge_mask |= BIT(port);
- 
- 	return 0;
- }
- 
--static int ocelot_port_bridge_leave(struct ocelot_port *ocelot_port,
-+static int ocelot_port_bridge_leave(struct ocelot *ocelot, int port,
- 				    struct net_device *bridge)
- {
--	struct ocelot *ocelot = ocelot_port->ocelot;
--	int port = ocelot_port->chip_port;
--
- 	ocelot->bridge_mask &= ~BIT(port);
- 
- 	if (!ocelot->bridge_mask)
-@@ -1676,14 +1671,12 @@ static void ocelot_setup_lag(struct ocel
- 	}
- }
- 
--static int ocelot_port_lag_join(struct ocelot_port *ocelot_port,
-+static int ocelot_port_lag_join(struct ocelot *ocelot, int port,
- 				struct net_device *bond)
- {
--	struct ocelot *ocelot = ocelot_port->ocelot;
--	int p = ocelot_port->chip_port;
--	int lag, lp;
- 	struct net_device *ndev;
- 	u32 bond_mask = 0;
-+	int lag, lp;
- 
- 	rcu_read_lock();
- 	for_each_netdev_in_bond_rcu(bond, ndev) {
-@@ -1698,17 +1691,17 @@ static int ocelot_port_lag_join(struct o
- 	/* If the new port is the lowest one, use it as the logical port from
- 	 * now on
- 	 */
--	if (p == lp) {
--		lag = p;
--		ocelot->lags[p] = bond_mask;
--		bond_mask &= ~BIT(p);
-+	if (port == lp) {
-+		lag = port;
-+		ocelot->lags[port] = bond_mask;
-+		bond_mask &= ~BIT(port);
- 		if (bond_mask) {
- 			lp = __ffs(bond_mask);
- 			ocelot->lags[lp] = 0;
- 		}
- 	} else {
- 		lag = lp;
--		ocelot->lags[lp] |= BIT(p);
-+		ocelot->lags[lp] |= BIT(port);
- 	}
- 
- 	ocelot_setup_lag(ocelot, lag);
-@@ -1717,34 +1710,32 @@ static int ocelot_port_lag_join(struct o
- 	return 0;
- }
- 
--static void ocelot_port_lag_leave(struct ocelot_port *ocelot_port,
-+static void ocelot_port_lag_leave(struct ocelot *ocelot, int port,
- 				  struct net_device *bond)
- {
--	struct ocelot *ocelot = ocelot_port->ocelot;
--	int p = ocelot_port->chip_port;
- 	u32 port_cfg;
- 	int i;
- 
- 	/* Remove port from any lag */
- 	for (i = 0; i < ocelot->num_phys_ports; i++)
--		ocelot->lags[i] &= ~BIT(ocelot_port->chip_port);
-+		ocelot->lags[i] &= ~BIT(port);
- 
- 	/* if it was the logical port of the lag, move the lag config to the
- 	 * next port
- 	 */
--	if (ocelot->lags[p]) {
--		int n = __ffs(ocelot->lags[p]);
-+	if (ocelot->lags[port]) {
-+		int n = __ffs(ocelot->lags[port]);
- 
--		ocelot->lags[n] = ocelot->lags[p];
--		ocelot->lags[p] = 0;
-+		ocelot->lags[n] = ocelot->lags[port];
-+		ocelot->lags[port] = 0;
- 
- 		ocelot_setup_lag(ocelot, n);
- 	}
- 
--	port_cfg = ocelot_read_gix(ocelot, ANA_PORT_PORT_CFG, p);
-+	port_cfg = ocelot_read_gix(ocelot, ANA_PORT_PORT_CFG, port);
- 	port_cfg &= ~ANA_PORT_PORT_CFG_PORTID_VAL_M;
--	ocelot_write_gix(ocelot, port_cfg | ANA_PORT_PORT_CFG_PORTID_VAL(p),
--			 ANA_PORT_PORT_CFG, p);
-+	ocelot_write_gix(ocelot, port_cfg | ANA_PORT_PORT_CFG_PORTID_VAL(port),
-+			 ANA_PORT_PORT_CFG, port);
- 
- 	ocelot_set_aggr_pgids(ocelot);
- }
-@@ -1760,24 +1751,26 @@ static int ocelot_netdevice_port_event(s
- 				       struct netdev_notifier_changeupper_info *info)
- {
- 	struct ocelot_port *ocelot_port = netdev_priv(dev);
-+	struct ocelot *ocelot = ocelot_port->ocelot;
-+	int port = ocelot_port->chip_port;
- 	int err = 0;
- 
- 	switch (event) {
- 	case NETDEV_CHANGEUPPER:
- 		if (netif_is_bridge_master(info->upper_dev)) {
- 			if (info->linking)
--				err = ocelot_port_bridge_join(ocelot_port,
-+				err = ocelot_port_bridge_join(ocelot, port,
- 							      info->upper_dev);
- 			else
--				err = ocelot_port_bridge_leave(ocelot_port,
-+				err = ocelot_port_bridge_leave(ocelot, port,
- 							       info->upper_dev);
- 		}
- 		if (netif_is_lag_master(info->upper_dev)) {
- 			if (info->linking)
--				err = ocelot_port_lag_join(ocelot_port,
-+				err = ocelot_port_lag_join(ocelot, port,
- 							   info->upper_dev);
- 			else
--				ocelot_port_lag_leave(ocelot_port,
-+				ocelot_port_lag_leave(ocelot, port,
- 						      info->upper_dev);
- 		}
- 		break;
-@@ -2135,7 +2128,7 @@ int ocelot_probe_port(struct ocelot *oce
- 		       REW_PORT_VLAN_CFG, port);
- 
- 	/* Enable vcap lookups */
--	ocelot_vcap_enable(ocelot, ocelot_port);
-+	ocelot_vcap_enable(ocelot, port);
- 
- 	return 0;
- 
---- a/drivers/net/ethernet/mscc/ocelot_police.c
-+++ b/drivers/net/ethernet/mscc/ocelot_police.c
-@@ -40,13 +40,12 @@ struct qos_policer_conf {
- 	u8   ipg; /* Size of IPG when MSCC_QOS_RATE_MODE_LINE is chosen */
- };
- 
--static int qos_policer_conf_set(struct ocelot_port *port, u32 pol_ix,
-+static int qos_policer_conf_set(struct ocelot *ocelot, int port, u32 pol_ix,
- 				struct qos_policer_conf *conf)
- {
- 	u32 cf = 0, cir_ena = 0, frm_mode = POL_MODE_LINERATE;
- 	u32 cir = 0, cbs = 0, pir = 0, pbs = 0;
- 	bool cir_discard = 0, pir_discard = 0;
--	struct ocelot *ocelot = port->ocelot;
- 	u32 pbs_max = 0, cbs_max = 0;
- 	u8 ipg = 20;
- 	u32 value;
-@@ -123,22 +122,26 @@ static int qos_policer_conf_set(struct o
- 
- 	/* Check limits */
- 	if (pir > GENMASK(15, 0)) {
--		netdev_err(port->dev, "Invalid pir\n");
-+		dev_err(ocelot->dev, "Invalid pir for port %d: %u (max %lu)\n",
-+			port, pir, GENMASK(15, 0));
- 		return -EINVAL;
- 	}
- 
- 	if (cir > GENMASK(15, 0)) {
--		netdev_err(port->dev, "Invalid cir\n");
-+		dev_err(ocelot->dev, "Invalid cir for port %d: %u (max %lu)\n",
-+			port, cir, GENMASK(15, 0));
- 		return -EINVAL;
- 	}
- 
- 	if (pbs > pbs_max) {
--		netdev_err(port->dev, "Invalid pbs\n");
-+		dev_err(ocelot->dev, "Invalid pbs for port %d: %u (max %u)\n",
-+			port, pbs, pbs_max);
- 		return -EINVAL;
- 	}
- 
- 	if (cbs > cbs_max) {
--		netdev_err(port->dev, "Invalid cbs\n");
-+		dev_err(ocelot->dev, "Invalid cbs for port %d: %u (max %u)\n",
-+			port, cbs, cbs_max);
- 		return -EINVAL;
- 	}
- 
-@@ -171,10 +174,9 @@ static int qos_policer_conf_set(struct o
- 	return 0;
- }
- 
--int ocelot_port_policer_add(struct ocelot_port *port,
-+int ocelot_port_policer_add(struct ocelot *ocelot, int port,
- 			    struct ocelot_policer *pol)
- {
--	struct ocelot *ocelot = port->ocelot;
- 	struct qos_policer_conf pp = { 0 };
- 	int err;
- 
-@@ -185,11 +187,10 @@ int ocelot_port_policer_add(struct ocelo
- 	pp.pir = pol->rate;
- 	pp.pbs = pol->burst;
- 
--	netdev_dbg(port->dev,
--		   "%s: port %u pir %u kbps, pbs %u bytes\n",
--		   __func__, port->chip_port, pp.pir, pp.pbs);
-+	dev_dbg(ocelot->dev, "%s: port %u pir %u kbps, pbs %u bytes\n",
-+		__func__, port, pp.pir, pp.pbs);
- 
--	err = qos_policer_conf_set(port, POL_IX_PORT + port->chip_port, &pp);
-+	err = qos_policer_conf_set(ocelot, port, POL_IX_PORT + port, &pp);
- 	if (err)
- 		return err;
- 
-@@ -198,22 +199,21 @@ int ocelot_port_policer_add(struct ocelo
- 		       ANA_PORT_POL_CFG_POL_ORDER(POL_ORDER),
- 		       ANA_PORT_POL_CFG_PORT_POL_ENA |
- 		       ANA_PORT_POL_CFG_POL_ORDER_M,
--		       ANA_PORT_POL_CFG, port->chip_port);
-+		       ANA_PORT_POL_CFG, port);
- 
- 	return 0;
- }
- 
--int ocelot_port_policer_del(struct ocelot_port *port)
-+int ocelot_port_policer_del(struct ocelot *ocelot, int port)
- {
--	struct ocelot *ocelot = port->ocelot;
- 	struct qos_policer_conf pp = { 0 };
- 	int err;
- 
--	netdev_dbg(port->dev, "%s: port %u\n", __func__, port->chip_port);
-+	dev_dbg(ocelot->dev, "%s: port %u\n", __func__, port);
- 
- 	pp.mode = MSCC_QOS_RATE_MODE_DISABLED;
- 
--	err = qos_policer_conf_set(port, POL_IX_PORT + port->chip_port, &pp);
-+	err = qos_policer_conf_set(ocelot, port, POL_IX_PORT + port, &pp);
- 	if (err)
- 		return err;
- 
-@@ -221,7 +221,7 @@ int ocelot_port_policer_del(struct ocelo
- 		       ANA_PORT_POL_CFG_POL_ORDER(POL_ORDER),
- 		       ANA_PORT_POL_CFG_PORT_POL_ENA |
- 		       ANA_PORT_POL_CFG_POL_ORDER_M,
--		       ANA_PORT_POL_CFG, port->chip_port);
-+		       ANA_PORT_POL_CFG, port);
- 
- 	return 0;
- }
---- a/drivers/net/ethernet/mscc/ocelot_police.h
-+++ b/drivers/net/ethernet/mscc/ocelot_police.h
-@@ -14,9 +14,9 @@ struct ocelot_policer {
- 	u32 burst; /* bytes */
- };
- 
--int ocelot_port_policer_add(struct ocelot_port *port,
-+int ocelot_port_policer_add(struct ocelot *ocelot, int port,
- 			    struct ocelot_policer *pol);
- 
--int ocelot_port_policer_del(struct ocelot_port *port);
-+int ocelot_port_policer_del(struct ocelot *ocelot, int port);
- 
- #endif /* _MSCC_OCELOT_POLICE_H_ */
---- a/drivers/net/ethernet/mscc/ocelot_tc.c
-+++ b/drivers/net/ethernet/mscc/ocelot_tc.c
-@@ -58,7 +58,8 @@ static int ocelot_setup_tc_cls_matchall(
- 					 PSCHED_NS2TICKS(action->police.burst),
- 					 PSCHED_TICKS_PER_SEC);
- 
--		err = ocelot_port_policer_add(port, &pol);
-+		err = ocelot_port_policer_add(port->ocelot, port->chip_port,
-+					      &pol);
- 		if (err) {
- 			NL_SET_ERR_MSG_MOD(extack, "Could not add policer\n");
- 			return err;
-@@ -71,7 +72,7 @@ static int ocelot_setup_tc_cls_matchall(
- 		if (port->tc.police_id != f->cookie)
- 			return -ENOENT;
- 
--		err = ocelot_port_policer_del(port);
-+		err = ocelot_port_policer_del(port->ocelot, port->chip_port);
- 		if (err) {
- 			NL_SET_ERR_MSG_MOD(extack,
- 					   "Could not delete policer\n");
diff --git a/target/linux/layerscape/patches-5.4/701-net-0244-net-mscc-ocelot-separate-net_device-related-items-ou.patch b/target/linux/layerscape/patches-5.4/701-net-0244-net-mscc-ocelot-separate-net_device-related-items-ou.patch
deleted file mode 100644
index 774e8d0bfe..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0244-net-mscc-ocelot-separate-net_device-related-items-ou.patch
+++ /dev/null
@@ -1,1171 +0,0 @@
-From b0481fbc0d853fd164055293002c621827eba5ad Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Sat, 9 Nov 2019 15:02:53 +0200
-Subject: [PATCH] net: mscc: ocelot: separate net_device related items out of
- ocelot_port
-
-The ocelot and ocelot_port structures will be used by a new DSA driver,
-so the ocelot_board.c file will have to allocate and work with a private
-structure (ocelot_port_private), which embeds the generic struct
-ocelot_port. This is because in DSA, at least one interface does not
-have a net_device, and the DSA driver API does not interact with that
-anyway.
-
-The ocelot_port structure is equivalent to dsa_port, and ocelot to
-dsa_switch. The members of ocelot_port which have an equivalent in
-dsa_port (such as dp->vlan_filtering) have been moved to
-ocelot_port_private.
-
-We want to enforce the coding convention that "ocelot_port" refers to
-the structure, and "port" refers to the integer index. One can retrieve
-the structure at any time from ocelot->ports[port].
-
-The patch is large but only contains variable renaming and mechanical
-movement of fields from one structure to another.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c        | 288 ++++++++++++++++--------------
- drivers/net/ethernet/mscc/ocelot.h        |  21 ++-
- drivers/net/ethernet/mscc/ocelot_ace.h    |   4 +-
- drivers/net/ethernet/mscc/ocelot_board.c  |  25 ++-
- drivers/net/ethernet/mscc/ocelot_flower.c |  32 ++--
- drivers/net/ethernet/mscc/ocelot_tc.c     |  57 +++---
- 6 files changed, 235 insertions(+), 192 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -229,8 +229,6 @@ static void ocelot_port_vlan_filtering(s
- 	ocelot_rmw_gix(ocelot, val,
- 		       REW_TAG_CFG_TAG_CFG_M,
- 		       REW_TAG_CFG, port);
--
--	ocelot_port->vlan_aware = vlan_aware;
- }
- 
- static int ocelot_port_set_native_vlan(struct ocelot *ocelot, int port,
-@@ -297,9 +295,10 @@ static int ocelot_vlan_add(struct ocelot
- static int ocelot_vlan_vid_add(struct net_device *dev, u16 vid, bool pvid,
- 			       bool untagged)
- {
--	struct ocelot_port *ocelot_port = netdev_priv(dev);
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot_port *ocelot_port = &priv->port;
- 	struct ocelot *ocelot = ocelot_port->ocelot;
--	int port = ocelot_port->chip_port;
-+	int port = priv->chip_port;
- 	int ret;
- 
- 	ret = ocelot_vlan_add(ocelot, port, vid, pvid, untagged);
-@@ -337,9 +336,9 @@ static int ocelot_vlan_del(struct ocelot
- 
- static int ocelot_vlan_vid_del(struct net_device *dev, u16 vid)
- {
--	struct ocelot_port *ocelot_port = netdev_priv(dev);
--	struct ocelot *ocelot = ocelot_port->ocelot;
--	int port = ocelot_port->chip_port;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
- 	int ret;
- 
- 	/* 8021q removes VID 0 on module unload for all interfaces
-@@ -412,10 +411,11 @@ static u16 ocelot_wm_enc(u16 value)
- 
- static void ocelot_port_adjust_link(struct net_device *dev)
- {
--	struct ocelot_port *port = netdev_priv(dev);
--	struct ocelot *ocelot = port->ocelot;
--	u8 p = port->chip_port;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot_port *ocelot_port = &priv->port;
-+	struct ocelot *ocelot = ocelot_port->ocelot;
- 	int speed, atop_wm, mode = 0;
-+	u8 port = priv->chip_port;
- 
- 	switch (dev->phydev->speed) {
- 	case SPEED_10:
-@@ -444,62 +444,66 @@ static void ocelot_port_adjust_link(stru
- 		return;
- 
- 	/* Only full duplex supported for now */
--	ocelot_port_writel(port, DEV_MAC_MODE_CFG_FDX_ENA |
-+	ocelot_port_writel(ocelot_port, DEV_MAC_MODE_CFG_FDX_ENA |
- 			   mode, DEV_MAC_MODE_CFG);
- 
- 	/* Set MAC IFG Gaps
- 	 * FDX: TX_IFG = 5, RX_IFG1 = RX_IFG2 = 0
- 	 * !FDX: TX_IFG = 5, RX_IFG1 = RX_IFG2 = 5
- 	 */
--	ocelot_port_writel(port, DEV_MAC_IFG_CFG_TX_IFG(5), DEV_MAC_IFG_CFG);
-+	ocelot_port_writel(ocelot_port, DEV_MAC_IFG_CFG_TX_IFG(5),
-+			   DEV_MAC_IFG_CFG);
- 
- 	/* Load seed (0) and set MAC HDX late collision  */
--	ocelot_port_writel(port, DEV_MAC_HDX_CFG_LATE_COL_POS(67) |
-+	ocelot_port_writel(ocelot_port, DEV_MAC_HDX_CFG_LATE_COL_POS(67) |
- 			   DEV_MAC_HDX_CFG_SEED_LOAD,
- 			   DEV_MAC_HDX_CFG);
- 	mdelay(1);
--	ocelot_port_writel(port, DEV_MAC_HDX_CFG_LATE_COL_POS(67),
-+	ocelot_port_writel(ocelot_port, DEV_MAC_HDX_CFG_LATE_COL_POS(67),
- 			   DEV_MAC_HDX_CFG);
- 
- 	/* Disable HDX fast control */
--	ocelot_port_writel(port, DEV_PORT_MISC_HDX_FAST_DIS, DEV_PORT_MISC);
-+	ocelot_port_writel(ocelot_port, DEV_PORT_MISC_HDX_FAST_DIS,
-+			   DEV_PORT_MISC);
- 
- 	/* SGMII only for now */
--	ocelot_port_writel(port, PCS1G_MODE_CFG_SGMII_MODE_ENA, PCS1G_MODE_CFG);
--	ocelot_port_writel(port, PCS1G_SD_CFG_SD_SEL, PCS1G_SD_CFG);
-+	ocelot_port_writel(ocelot_port, PCS1G_MODE_CFG_SGMII_MODE_ENA,
-+			   PCS1G_MODE_CFG);
-+	ocelot_port_writel(ocelot_port, PCS1G_SD_CFG_SD_SEL, PCS1G_SD_CFG);
- 
- 	/* Enable PCS */
--	ocelot_port_writel(port, PCS1G_CFG_PCS_ENA, PCS1G_CFG);
-+	ocelot_port_writel(ocelot_port, PCS1G_CFG_PCS_ENA, PCS1G_CFG);
- 
- 	/* No aneg on SGMII */
--	ocelot_port_writel(port, 0, PCS1G_ANEG_CFG);
-+	ocelot_port_writel(ocelot_port, 0, PCS1G_ANEG_CFG);
- 
- 	/* No loopback */
--	ocelot_port_writel(port, 0, PCS1G_LB_CFG);
-+	ocelot_port_writel(ocelot_port, 0, PCS1G_LB_CFG);
- 
- 	/* Set Max Length and maximum tags allowed */
--	ocelot_port_writel(port, VLAN_ETH_FRAME_LEN, DEV_MAC_MAXLEN_CFG);
--	ocelot_port_writel(port, DEV_MAC_TAGS_CFG_TAG_ID(ETH_P_8021AD) |
-+	ocelot_port_writel(ocelot_port, VLAN_ETH_FRAME_LEN,
-+			   DEV_MAC_MAXLEN_CFG);
-+	ocelot_port_writel(ocelot_port, DEV_MAC_TAGS_CFG_TAG_ID(ETH_P_8021AD) |
- 			   DEV_MAC_TAGS_CFG_VLAN_AWR_ENA |
- 			   DEV_MAC_TAGS_CFG_VLAN_LEN_AWR_ENA,
- 			   DEV_MAC_TAGS_CFG);
- 
- 	/* Enable MAC module */
--	ocelot_port_writel(port, DEV_MAC_ENA_CFG_RX_ENA |
-+	ocelot_port_writel(ocelot_port, DEV_MAC_ENA_CFG_RX_ENA |
- 			   DEV_MAC_ENA_CFG_TX_ENA, DEV_MAC_ENA_CFG);
- 
- 	/* Take MAC, Port, Phy (intern) and PCS (SGMII/Serdes) clock out of
- 	 * reset */
--	ocelot_port_writel(port, DEV_CLOCK_CFG_LINK_SPEED(speed),
-+	ocelot_port_writel(ocelot_port, DEV_CLOCK_CFG_LINK_SPEED(speed),
- 			   DEV_CLOCK_CFG);
- 
- 	/* Set SMAC of Pause frame (00:00:00:00:00:00) */
--	ocelot_port_writel(port, 0, DEV_MAC_FC_MAC_HIGH_CFG);
--	ocelot_port_writel(port, 0, DEV_MAC_FC_MAC_LOW_CFG);
-+	ocelot_port_writel(ocelot_port, 0, DEV_MAC_FC_MAC_HIGH_CFG);
-+	ocelot_port_writel(ocelot_port, 0, DEV_MAC_FC_MAC_LOW_CFG);
- 
- 	/* No PFC */
- 	ocelot_write_gix(ocelot, ANA_PFC_PFC_CFG_FC_LINK_SPEED(speed),
--			 ANA_PFC_PFC_CFG, p);
-+			 ANA_PFC_PFC_CFG, port);
- 
- 	/* Set Pause WM hysteresis
- 	 * 152 = 6 * VLAN_ETH_FRAME_LEN / OCELOT_BUFFER_CELL_SZ
-@@ -507,13 +511,13 @@ static void ocelot_port_adjust_link(stru
- 	 */
- 	ocelot_write_rix(ocelot, SYS_PAUSE_CFG_PAUSE_ENA |
- 			 SYS_PAUSE_CFG_PAUSE_STOP(101) |
--			 SYS_PAUSE_CFG_PAUSE_START(152), SYS_PAUSE_CFG, p);
-+			 SYS_PAUSE_CFG_PAUSE_START(152), SYS_PAUSE_CFG, port);
- 
- 	/* Core: Enable port for frame transfer */
- 	ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
- 			 QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
- 			 QSYS_SWITCH_PORT_MODE_PORT_ENA,
--			 QSYS_SWITCH_PORT_MODE, p);
-+			 QSYS_SWITCH_PORT_MODE, port);
- 
- 	/* Flow control */
- 	ocelot_write_rix(ocelot, SYS_MAC_FC_CFG_PAUSE_VAL_CFG(0xffff) |
-@@ -521,20 +525,21 @@ static void ocelot_port_adjust_link(stru
- 			 SYS_MAC_FC_CFG_ZERO_PAUSE_ENA |
- 			 SYS_MAC_FC_CFG_FC_LATENCY_CFG(0x7) |
- 			 SYS_MAC_FC_CFG_FC_LINK_SPEED(speed),
--			 SYS_MAC_FC_CFG, p);
--	ocelot_write_rix(ocelot, 0, ANA_POL_FLOWC, p);
-+			 SYS_MAC_FC_CFG, port);
-+	ocelot_write_rix(ocelot, 0, ANA_POL_FLOWC, port);
- 
- 	/* Tail dropping watermark */
- 	atop_wm = (ocelot->shared_queue_sz - 9 * VLAN_ETH_FRAME_LEN) / OCELOT_BUFFER_CELL_SZ;
- 	ocelot_write_rix(ocelot, ocelot_wm_enc(9 * VLAN_ETH_FRAME_LEN),
--			 SYS_ATOP, p);
-+			 SYS_ATOP, port);
- 	ocelot_write(ocelot, ocelot_wm_enc(atop_wm), SYS_ATOP_TOT_CFG);
- }
- 
- static int ocelot_port_open(struct net_device *dev)
- {
--	struct ocelot_port *port = netdev_priv(dev);
--	struct ocelot *ocelot = port->ocelot;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
- 	int err;
- 
- 	/* Enable receiving frames on the port, and activate auto-learning of
-@@ -542,43 +547,44 @@ static int ocelot_port_open(struct net_d
- 	 */
- 	ocelot_write_gix(ocelot, ANA_PORT_PORT_CFG_LEARNAUTO |
- 			 ANA_PORT_PORT_CFG_RECV_ENA |
--			 ANA_PORT_PORT_CFG_PORTID_VAL(port->chip_port),
--			 ANA_PORT_PORT_CFG, port->chip_port);
-+			 ANA_PORT_PORT_CFG_PORTID_VAL(port),
-+			 ANA_PORT_PORT_CFG, port);
- 
--	if (port->serdes) {
--		err = phy_set_mode_ext(port->serdes, PHY_MODE_ETHERNET,
--				       port->phy_mode);
-+	if (priv->serdes) {
-+		err = phy_set_mode_ext(priv->serdes, PHY_MODE_ETHERNET,
-+				       priv->phy_mode);
- 		if (err) {
- 			netdev_err(dev, "Could not set mode of SerDes\n");
- 			return err;
- 		}
- 	}
- 
--	err = phy_connect_direct(dev, port->phy, &ocelot_port_adjust_link,
--				 port->phy_mode);
-+	err = phy_connect_direct(dev, priv->phy, &ocelot_port_adjust_link,
-+				 priv->phy_mode);
- 	if (err) {
- 		netdev_err(dev, "Could not attach to PHY\n");
- 		return err;
- 	}
- 
--	dev->phydev = port->phy;
-+	dev->phydev = priv->phy;
- 
--	phy_attached_info(port->phy);
--	phy_start(port->phy);
-+	phy_attached_info(priv->phy);
-+	phy_start(priv->phy);
- 	return 0;
- }
- 
- static int ocelot_port_stop(struct net_device *dev)
- {
--	struct ocelot_port *port = netdev_priv(dev);
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot_port *port = &priv->port;
- 
--	phy_disconnect(port->phy);
-+	phy_disconnect(priv->phy);
- 
- 	dev->phydev = NULL;
- 
- 	ocelot_port_writel(port, 0, DEV_MAC_ENA_CFG);
- 	ocelot_rmw_rix(port->ocelot, 0, QSYS_SWITCH_PORT_MODE_PORT_ENA,
--			 QSYS_SWITCH_PORT_MODE, port->chip_port);
-+		       QSYS_SWITCH_PORT_MODE, priv->chip_port);
- 	return 0;
- }
- 
-@@ -604,13 +610,15 @@ static int ocelot_gen_ifh(u32 *ifh, stru
- 
- static int ocelot_port_xmit(struct sk_buff *skb, struct net_device *dev)
- {
-+	struct ocelot_port_private *priv = netdev_priv(dev);
- 	struct skb_shared_info *shinfo = skb_shinfo(skb);
--	struct ocelot_port *port = netdev_priv(dev);
--	struct ocelot *ocelot = port->ocelot;
--	u32 val, ifh[IFH_LEN];
-+	struct ocelot_port *ocelot_port = &priv->port;
-+	struct ocelot *ocelot = ocelot_port->ocelot;
- 	struct frame_info info = {};
- 	u8 grp = 0; /* Send everything on CPU group 0 */
- 	unsigned int i, count, last;
-+	int port = priv->chip_port;
-+	u32 val, ifh[IFH_LEN];
- 
- 	val = ocelot_read(ocelot, QS_INJ_STATUS);
- 	if (!(val & QS_INJ_STATUS_FIFO_RDY(BIT(grp))) ||
-@@ -620,15 +628,15 @@ static int ocelot_port_xmit(struct sk_bu
- 	ocelot_write_rix(ocelot, QS_INJ_CTRL_GAP_SIZE(1) |
- 			 QS_INJ_CTRL_SOF, QS_INJ_CTRL, grp);
- 
--	info.port = BIT(port->chip_port);
-+	info.port = BIT(port);
- 	info.tag_type = IFH_TAG_TYPE_C;
- 	info.vid = skb_vlan_tag_get(skb);
- 
- 	/* Check if timestamping is needed */
- 	if (ocelot->ptp && shinfo->tx_flags & SKBTX_HW_TSTAMP) {
--		info.rew_op = port->ptp_cmd;
--		if (port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP)
--			info.rew_op |= (port->ts_id  % 4) << 3;
-+		info.rew_op = ocelot_port->ptp_cmd;
-+		if (ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP)
-+			info.rew_op |= (ocelot_port->ts_id  % 4) << 3;
- 	}
- 
- 	ocelot_gen_ifh(ifh, &info);
-@@ -663,7 +671,7 @@ static int ocelot_port_xmit(struct sk_bu
- 	dev->stats.tx_bytes += skb->len;
- 
- 	if (ocelot->ptp && shinfo->tx_flags & SKBTX_HW_TSTAMP &&
--	    port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP) {
-+	    ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP) {
- 		struct ocelot_skb *oskb =
- 			kzalloc(sizeof(struct ocelot_skb), GFP_ATOMIC);
- 
-@@ -673,10 +681,10 @@ static int ocelot_port_xmit(struct sk_bu
- 		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
- 
- 		oskb->skb = skb;
--		oskb->id = port->ts_id % 4;
--		port->ts_id++;
-+		oskb->id = ocelot_port->ts_id % 4;
-+		ocelot_port->ts_id++;
- 
--		list_add_tail(&oskb->head, &port->skbs);
-+		list_add_tail(&oskb->head, &ocelot_port->skbs);
- 
- 		return NETDEV_TX_OK;
- 	}
-@@ -715,25 +723,29 @@ EXPORT_SYMBOL(ocelot_get_hwtimestamp);
- 
- static int ocelot_mc_unsync(struct net_device *dev, const unsigned char *addr)
- {
--	struct ocelot_port *port = netdev_priv(dev);
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot_port *ocelot_port = &priv->port;
-+	struct ocelot *ocelot = ocelot_port->ocelot;
- 
--	return ocelot_mact_forget(port->ocelot, addr, port->pvid);
-+	return ocelot_mact_forget(ocelot, addr, ocelot_port->pvid);
- }
- 
- static int ocelot_mc_sync(struct net_device *dev, const unsigned char *addr)
- {
--	struct ocelot_port *port = netdev_priv(dev);
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot_port *ocelot_port = &priv->port;
-+	struct ocelot *ocelot = ocelot_port->ocelot;
- 
--	return ocelot_mact_learn(port->ocelot, PGID_CPU, addr, port->pvid,
-+	return ocelot_mact_learn(ocelot, PGID_CPU, addr, ocelot_port->pvid,
- 				 ENTRYTYPE_LOCKED);
- }
- 
- static void ocelot_set_rx_mode(struct net_device *dev)
- {
--	struct ocelot_port *port = netdev_priv(dev);
--	struct ocelot *ocelot = port->ocelot;
--	int i;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
- 	u32 val;
-+	int i;
- 
- 	/* This doesn't handle promiscuous mode because the bridge core is
- 	 * setting IFF_PROMISC on all slave interfaces and all frames would be
-@@ -749,10 +761,11 @@ static void ocelot_set_rx_mode(struct ne
- static int ocelot_port_get_phys_port_name(struct net_device *dev,
- 					  char *buf, size_t len)
- {
--	struct ocelot_port *port = netdev_priv(dev);
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	int port = priv->chip_port;
- 	int ret;
- 
--	ret = snprintf(buf, len, "p%d", port->chip_port);
-+	ret = snprintf(buf, len, "p%d", port);
- 	if (ret >= len)
- 		return -EINVAL;
- 
-@@ -761,15 +774,16 @@ static int ocelot_port_get_phys_port_nam
- 
- static int ocelot_port_set_mac_address(struct net_device *dev, void *p)
- {
--	struct ocelot_port *port = netdev_priv(dev);
--	struct ocelot *ocelot = port->ocelot;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot_port *ocelot_port = &priv->port;
-+	struct ocelot *ocelot = ocelot_port->ocelot;
- 	const struct sockaddr *addr = p;
- 
- 	/* Learn the new net device MAC address in the mac table. */
--	ocelot_mact_learn(ocelot, PGID_CPU, addr->sa_data, port->pvid,
-+	ocelot_mact_learn(ocelot, PGID_CPU, addr->sa_data, ocelot_port->pvid,
- 			  ENTRYTYPE_LOCKED);
- 	/* Then forget the previous one. */
--	ocelot_mact_forget(ocelot, dev->dev_addr, port->pvid);
-+	ocelot_mact_forget(ocelot, dev->dev_addr, ocelot_port->pvid);
- 
- 	ether_addr_copy(dev->dev_addr, addr->sa_data);
- 	return 0;
-@@ -778,11 +792,12 @@ static int ocelot_port_set_mac_address(s
- static void ocelot_get_stats64(struct net_device *dev,
- 			       struct rtnl_link_stats64 *stats)
- {
--	struct ocelot_port *port = netdev_priv(dev);
--	struct ocelot *ocelot = port->ocelot;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
- 
- 	/* Configure the port to read the stats from */
--	ocelot_write(ocelot, SYS_STAT_CFG_STAT_VIEW(port->chip_port),
-+	ocelot_write(ocelot, SYS_STAT_CFG_STAT_VIEW(port),
- 		     SYS_STAT_CFG);
- 
- 	/* Get Rx stats */
-@@ -814,12 +829,13 @@ static void ocelot_get_stats64(struct ne
- }
- 
- static int ocelot_fdb_add(struct ocelot *ocelot, int port,
--			  const unsigned char *addr, u16 vid)
-+			  const unsigned char *addr, u16 vid,
-+			  bool vlan_aware)
- {
- 	struct ocelot_port *ocelot_port = ocelot->ports[port];
- 
- 	if (!vid) {
--		if (!ocelot_port->vlan_aware)
-+		if (!vlan_aware)
- 			/* If the bridge is not VLAN aware and no VID was
- 			 * provided, set it to pvid to ensure the MAC entry
- 			 * matches incoming untagged packets
-@@ -841,10 +857,11 @@ static int ocelot_port_fdb_add(struct nd
- 			       u16 vid, u16 flags,
- 			       struct netlink_ext_ack *extack)
- {
--	struct ocelot_port *ocelot_port = netdev_priv(dev);
--	struct ocelot *ocelot = ocelot_port->ocelot;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
- 
--	return ocelot_fdb_add(ocelot, ocelot_port->chip_port, addr, vid);
-+	return ocelot_fdb_add(ocelot, port, addr, vid, priv->vlan_aware);
- }
- 
- static int ocelot_fdb_del(struct ocelot *ocelot, int port,
-@@ -857,10 +874,11 @@ static int ocelot_port_fdb_del(struct nd
- 			       struct net_device *dev,
- 			       const unsigned char *addr, u16 vid)
- {
--	struct ocelot_port *ocelot_port = netdev_priv(dev);
--	struct ocelot *ocelot = ocelot_port->ocelot;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
- 
--	return ocelot_fdb_del(ocelot, ocelot_port->chip_port, addr, vid);
-+	return ocelot_fdb_del(ocelot, port, addr, vid);
- }
- 
- struct ocelot_dump_ctx {
-@@ -999,18 +1017,18 @@ static int ocelot_port_fdb_dump(struct s
- 				struct net_device *dev,
- 				struct net_device *filter_dev, int *idx)
- {
--	struct ocelot_port *ocelot_port = netdev_priv(dev);
--	struct ocelot *ocelot = ocelot_port->ocelot;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
- 	struct ocelot_dump_ctx dump = {
- 		.dev = dev,
- 		.skb = skb,
- 		.cb = cb,
- 		.idx = *idx,
- 	};
-+	int port = priv->chip_port;
- 	int ret;
- 
--	ret = ocelot_fdb_dump(ocelot, ocelot_port->chip_port,
--			      ocelot_port_fdb_do_dump, &dump);
-+	ret = ocelot_fdb_dump(ocelot, port, ocelot_port_fdb_do_dump, &dump);
- 
- 	*idx = dump.idx;
- 
-@@ -1033,12 +1051,12 @@ static int ocelot_set_features(struct ne
- 			       netdev_features_t features)
- {
- 	netdev_features_t changed = dev->features ^ features;
--	struct ocelot_port *ocelot_port = netdev_priv(dev);
--	struct ocelot *ocelot = ocelot_port->ocelot;
--	int port = ocelot_port->chip_port;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
- 
- 	if ((dev->features & NETIF_F_HW_TC) > (features & NETIF_F_HW_TC) &&
--	    ocelot_port->tc.offload_cnt) {
-+	    priv->tc.offload_cnt) {
- 		netdev_err(dev,
- 			   "Cannot disable HW TC offload while offloads active\n");
- 		return -EBUSY;
-@@ -1053,8 +1071,8 @@ static int ocelot_set_features(struct ne
- static int ocelot_get_port_parent_id(struct net_device *dev,
- 				     struct netdev_phys_item_id *ppid)
- {
--	struct ocelot_port *ocelot_port = netdev_priv(dev);
--	struct ocelot *ocelot = ocelot_port->ocelot;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
- 
- 	ppid->id_len = sizeof(ocelot->base_mac);
- 	memcpy(&ppid->id, &ocelot->base_mac, ppid->id_len);
-@@ -1130,9 +1148,9 @@ static int ocelot_hwstamp_set(struct oce
- 
- static int ocelot_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
- {
--	struct ocelot_port *ocelot_port = netdev_priv(dev);
--	struct ocelot *ocelot = ocelot_port->ocelot;
--	int port = ocelot_port->chip_port;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
- 
- 	/* The function is only used for PTP operations for now */
- 	if (!ocelot->ptp)
-@@ -1169,8 +1187,8 @@ static const struct net_device_ops ocelo
- 
- static void ocelot_get_strings(struct net_device *netdev, u32 sset, u8 *data)
- {
--	struct ocelot_port *port = netdev_priv(netdev);
--	struct ocelot *ocelot = port->ocelot;
-+	struct ocelot_port_private *priv = netdev_priv(netdev);
-+	struct ocelot *ocelot = priv->port.ocelot;
- 	int i;
- 
- 	if (sset != ETH_SS_STATS)
-@@ -1224,8 +1242,9 @@ static void ocelot_check_stats_work(stru
- static void ocelot_get_ethtool_stats(struct net_device *dev,
- 				     struct ethtool_stats *stats, u64 *data)
- {
--	struct ocelot_port *port = netdev_priv(dev);
--	struct ocelot *ocelot = port->ocelot;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
- 	int i;
- 
- 	/* check and update now */
-@@ -1233,13 +1252,13 @@ static void ocelot_get_ethtool_stats(str
- 
- 	/* Copy all counters */
- 	for (i = 0; i < ocelot->num_stats; i++)
--		*data++ = ocelot->stats[port->chip_port * ocelot->num_stats + i];
-+		*data++ = ocelot->stats[port * ocelot->num_stats + i];
- }
- 
- static int ocelot_get_sset_count(struct net_device *dev, int sset)
- {
--	struct ocelot_port *port = netdev_priv(dev);
--	struct ocelot *ocelot = port->ocelot;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
- 
- 	if (sset != ETH_SS_STATS)
- 		return -EOPNOTSUPP;
-@@ -1249,8 +1268,8 @@ static int ocelot_get_sset_count(struct
- static int ocelot_get_ts_info(struct net_device *dev,
- 			      struct ethtool_ts_info *info)
- {
--	struct ocelot_port *ocelot_port = netdev_priv(dev);
--	struct ocelot *ocelot = ocelot_port->ocelot;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
- 
- 	if (!ocelot->ptp)
- 		return ethtool_op_get_ts_info(dev, info);
-@@ -1385,9 +1404,9 @@ static int ocelot_port_attr_set(struct n
- 				const struct switchdev_attr *attr,
- 				struct switchdev_trans *trans)
- {
--	struct ocelot_port *ocelot_port = netdev_priv(dev);
--	struct ocelot *ocelot = ocelot_port->ocelot;
--	int port = ocelot_port->chip_port;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
- 	int err = 0;
- 
- 	switch (attr->id) {
-@@ -1399,8 +1418,8 @@ static int ocelot_port_attr_set(struct n
- 		ocelot_port_attr_ageing_set(ocelot, port, attr->u.ageing_time);
- 		break;
- 	case SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING:
--		ocelot_port_vlan_filtering(ocelot, port,
--					   attr->u.vlan_filtering);
-+		priv->vlan_aware = attr->u.vlan_filtering;
-+		ocelot_port_vlan_filtering(ocelot, port, priv->vlan_aware);
- 		break;
- 	case SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED:
- 		ocelot_port_attr_mc_set(ocelot, port, !attr->u.mc_disabled);
-@@ -1465,15 +1484,17 @@ static int ocelot_port_obj_add_mdb(struc
- 				   const struct switchdev_obj_port_mdb *mdb,
- 				   struct switchdev_trans *trans)
- {
--	struct ocelot_port *port = netdev_priv(dev);
--	struct ocelot *ocelot = port->ocelot;
--	struct ocelot_multicast *mc;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot_port *ocelot_port = &priv->port;
-+	struct ocelot *ocelot = ocelot_port->ocelot;
- 	unsigned char addr[ETH_ALEN];
-+	struct ocelot_multicast *mc;
-+	int port = priv->chip_port;
- 	u16 vid = mdb->vid;
- 	bool new = false;
- 
- 	if (!vid)
--		vid = port->pvid;
-+		vid = ocelot_port->pvid;
- 
- 	mc = ocelot_multicast_get(ocelot, mdb->addr, vid);
- 	if (!mc) {
-@@ -1497,7 +1518,7 @@ static int ocelot_port_obj_add_mdb(struc
- 		ocelot_mact_forget(ocelot, addr, vid);
- 	}
- 
--	mc->ports |= BIT(port->chip_port);
-+	mc->ports |= BIT(port);
- 	addr[2] = mc->ports << 0;
- 	addr[1] = mc->ports << 8;
- 
-@@ -1507,14 +1528,16 @@ static int ocelot_port_obj_add_mdb(struc
- static int ocelot_port_obj_del_mdb(struct net_device *dev,
- 				   const struct switchdev_obj_port_mdb *mdb)
- {
--	struct ocelot_port *port = netdev_priv(dev);
--	struct ocelot *ocelot = port->ocelot;
--	struct ocelot_multicast *mc;
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot_port *ocelot_port = &priv->port;
-+	struct ocelot *ocelot = ocelot_port->ocelot;
- 	unsigned char addr[ETH_ALEN];
-+	struct ocelot_multicast *mc;
-+	int port = priv->chip_port;
- 	u16 vid = mdb->vid;
- 
- 	if (!vid)
--		vid = port->pvid;
-+		vid = ocelot_port->pvid;
- 
- 	mc = ocelot_multicast_get(ocelot, mdb->addr, vid);
- 	if (!mc)
-@@ -1526,7 +1549,7 @@ static int ocelot_port_obj_del_mdb(struc
- 	addr[0] = 0;
- 	ocelot_mact_forget(ocelot, addr, vid);
- 
--	mc->ports &= ~BIT(port->chip_port);
-+	mc->ports &= ~BIT(port);
- 	if (!mc->ports) {
- 		list_del(&mc->list);
- 		devm_kfree(ocelot->dev, mc);
-@@ -1680,9 +1703,9 @@ static int ocelot_port_lag_join(struct o
- 
- 	rcu_read_lock();
- 	for_each_netdev_in_bond_rcu(bond, ndev) {
--		struct ocelot_port *port = netdev_priv(ndev);
-+		struct ocelot_port_private *priv = netdev_priv(ndev);
- 
--		bond_mask |= BIT(port->chip_port);
-+		bond_mask |= BIT(priv->chip_port);
- 	}
- 	rcu_read_unlock();
- 
-@@ -1750,20 +1773,23 @@ static int ocelot_netdevice_port_event(s
- 				       unsigned long event,
- 				       struct netdev_notifier_changeupper_info *info)
- {
--	struct ocelot_port *ocelot_port = netdev_priv(dev);
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot_port *ocelot_port = &priv->port;
- 	struct ocelot *ocelot = ocelot_port->ocelot;
--	int port = ocelot_port->chip_port;
-+	int port = priv->chip_port;
- 	int err = 0;
- 
- 	switch (event) {
- 	case NETDEV_CHANGEUPPER:
- 		if (netif_is_bridge_master(info->upper_dev)) {
--			if (info->linking)
-+			if (info->linking) {
- 				err = ocelot_port_bridge_join(ocelot, port,
- 							      info->upper_dev);
--			else
-+			} else {
- 				err = ocelot_port_bridge_leave(ocelot, port,
- 							       info->upper_dev);
-+				priv->vlan_aware = false;
-+			}
- 		}
- 		if (netif_is_lag_master(info->upper_dev)) {
- 			if (info->linking)
-@@ -2079,21 +2105,23 @@ int ocelot_probe_port(struct ocelot *oce
- 		      void __iomem *regs,
- 		      struct phy_device *phy)
- {
-+	struct ocelot_port_private *priv;
- 	struct ocelot_port *ocelot_port;
- 	struct net_device *dev;
- 	u32 val;
- 	int err;
- 
--	dev = alloc_etherdev(sizeof(struct ocelot_port));
-+	dev = alloc_etherdev(sizeof(struct ocelot_port_private));
- 	if (!dev)
- 		return -ENOMEM;
- 	SET_NETDEV_DEV(dev, ocelot->dev);
--	ocelot_port = netdev_priv(dev);
--	ocelot_port->dev = dev;
-+	priv = netdev_priv(dev);
-+	priv->dev = dev;
-+	priv->phy = phy;
-+	priv->chip_port = port;
-+	ocelot_port = &priv->port;
- 	ocelot_port->ocelot = ocelot;
- 	ocelot_port->regs = regs;
--	ocelot_port->chip_port = port;
--	ocelot_port->phy = phy;
- 	ocelot->ports[port] = ocelot_port;
- 
- 	dev->netdev_ops = &ocelot_port_netdev_ops;
---- a/drivers/net/ethernet/mscc/ocelot.h
-+++ b/drivers/net/ethernet/mscc/ocelot.h
-@@ -479,11 +479,9 @@ struct ocelot {
- };
- 
- struct ocelot_port {
--	struct net_device *dev;
- 	struct ocelot *ocelot;
--	struct phy_device *phy;
-+
- 	void __iomem *regs;
--	u8 chip_port;
- 
- 	/* Ingress default VLAN (pvid) */
- 	u16 pvid;
-@@ -491,18 +489,23 @@ struct ocelot_port {
- 	/* Egress default VLAN (vid) */
- 	u16 vid;
- 
--	u8 vlan_aware;
-+	u8 ptp_cmd;
-+	struct list_head skbs;
-+	u8 ts_id;
-+};
- 
--	u64 *stats;
-+struct ocelot_port_private {
-+	struct ocelot_port port;
-+	struct net_device *dev;
-+	struct phy_device *phy;
-+	u8 chip_port;
-+
-+	u8 vlan_aware;
- 
- 	phy_interface_t phy_mode;
- 	struct phy *serdes;
- 
- 	struct ocelot_port_tc tc;
--
--	u8 ptp_cmd;
--	struct list_head skbs;
--	u8 ts_id;
- };
- 
- struct ocelot_skb {
---- a/drivers/net/ethernet/mscc/ocelot_ace.h
-+++ b/drivers/net/ethernet/mscc/ocelot_ace.h
-@@ -224,9 +224,9 @@ int ocelot_ace_rule_stats_update(struct
- int ocelot_ace_init(struct ocelot *ocelot);
- void ocelot_ace_deinit(void);
- 
--int ocelot_setup_tc_block_flower_bind(struct ocelot_port *port,
-+int ocelot_setup_tc_block_flower_bind(struct ocelot_port_private *priv,
- 				      struct flow_block_offload *f);
--void ocelot_setup_tc_block_flower_unbind(struct ocelot_port *port,
-+void ocelot_setup_tc_block_flower_unbind(struct ocelot_port_private *priv,
- 					 struct flow_block_offload *f);
- 
- #endif /* _MSCC_OCELOT_ACE_H_ */
---- a/drivers/net/ethernet/mscc/ocelot_board.c
-+++ b/drivers/net/ethernet/mscc/ocelot_board.c
-@@ -95,6 +95,8 @@ static irqreturn_t ocelot_xtr_irq_handle
- 
- 	do {
- 		struct skb_shared_hwtstamps *shhwtstamps;
-+		struct ocelot_port_private *priv;
-+		struct ocelot_port *ocelot_port;
- 		u64 tod_in_ns, full_ts_in_ns;
- 		struct frame_info info = {};
- 		struct net_device *dev;
-@@ -122,7 +124,10 @@ static irqreturn_t ocelot_xtr_irq_handle
- 
- 		ocelot_parse_ifh(ifh, &info);
- 
--		dev = ocelot->ports[info.port]->dev;
-+		ocelot_port = ocelot->ports[info.port];
-+		priv = container_of(ocelot_port, struct ocelot_port_private,
-+				    port);
-+		dev = priv->dev;
- 
- 		skb = netdev_alloc_skb(dev, info.len);
- 
-@@ -371,6 +376,8 @@ static int mscc_ocelot_probe(struct plat
- 	ocelot_init(ocelot);
- 
- 	for_each_available_child_of_node(ports, portnp) {
-+		struct ocelot_port_private *priv;
-+		struct ocelot_port *ocelot_port;
- 		struct device_node *phy_node;
- 		struct phy_device *phy;
- 		struct resource *res;
-@@ -406,13 +413,17 @@ static int mscc_ocelot_probe(struct plat
- 			goto out_put_ports;
- 		}
- 
-+		ocelot_port = ocelot->ports[port];
-+		priv = container_of(ocelot_port, struct ocelot_port_private,
-+				    port);
-+
- 		phy_mode = of_get_phy_mode(portnp);
- 		if (phy_mode < 0)
--			ocelot->ports[port]->phy_mode = PHY_INTERFACE_MODE_NA;
--		else
--			ocelot->ports[port]->phy_mode = phy_mode;
-+			phy_mode = PHY_INTERFACE_MODE_NA;
-+
-+		priv->phy_mode = phy_mode;
- 
--		switch (ocelot->ports[port]->phy_mode) {
-+		switch (priv->phy_mode) {
- 		case PHY_INTERFACE_MODE_NA:
- 			continue;
- 		case PHY_INTERFACE_MODE_SGMII:
-@@ -421,7 +432,7 @@ static int mscc_ocelot_probe(struct plat
- 			/* Ensure clock signals and speed is set on all
- 			 * QSGMII links
- 			 */
--			ocelot_port_writel(ocelot->ports[port],
-+			ocelot_port_writel(ocelot_port,
- 					   DEV_CLOCK_CFG_LINK_SPEED
- 					   (OCELOT_SPEED_1000),
- 					   DEV_CLOCK_CFG);
-@@ -449,7 +460,7 @@ static int mscc_ocelot_probe(struct plat
- 			goto out_put_ports;
- 		}
- 
--		ocelot->ports[port]->serdes = serdes;
-+		priv->serdes = serdes;
- 	}
- 
- 	register_netdevice_notifier(&ocelot_netdevice_nb);
---- a/drivers/net/ethernet/mscc/ocelot_flower.c
-+++ b/drivers/net/ethernet/mscc/ocelot_flower.c
-@@ -10,7 +10,7 @@
- 
- struct ocelot_port_block {
- 	struct ocelot_acl_block *block;
--	struct ocelot_port *port;
-+	struct ocelot_port_private *priv;
- };
- 
- static int ocelot_flower_parse_action(struct flow_cls_offload *f,
-@@ -177,8 +177,8 @@ struct ocelot_ace_rule *ocelot_ace_rule_
- 	if (!rule)
- 		return NULL;
- 
--	rule->port = block->port;
--	rule->chip_port = block->port->chip_port;
-+	rule->port = &block->priv->port;
-+	rule->chip_port = block->priv->chip_port;
- 	return rule;
- }
- 
-@@ -202,7 +202,7 @@ static int ocelot_flower_replace(struct
- 	if (ret)
- 		return ret;
- 
--	port_block->port->tc.offload_cnt++;
-+	port_block->priv->tc.offload_cnt++;
- 	return 0;
- }
- 
-@@ -213,14 +213,14 @@ static int ocelot_flower_destroy(struct
- 	int ret;
- 
- 	rule.prio = f->common.prio;
--	rule.port = port_block->port;
-+	rule.port = &port_block->priv->port;
- 	rule.id = f->cookie;
- 
- 	ret = ocelot_ace_rule_offload_del(&rule);
- 	if (ret)
- 		return ret;
- 
--	port_block->port->tc.offload_cnt--;
-+	port_block->priv->tc.offload_cnt--;
- 	return 0;
- }
- 
-@@ -231,7 +231,7 @@ static int ocelot_flower_stats_update(st
- 	int ret;
- 
- 	rule.prio = f->common.prio;
--	rule.port = port_block->port;
-+	rule.port = &port_block->priv->port;
- 	rule.id = f->cookie;
- 	ret = ocelot_ace_rule_stats_update(&rule);
- 	if (ret)
-@@ -261,7 +261,7 @@ static int ocelot_setup_tc_block_cb_flow
- {
- 	struct ocelot_port_block *port_block = cb_priv;
- 
--	if (!tc_cls_can_offload_and_chain0(port_block->port->dev, type_data))
-+	if (!tc_cls_can_offload_and_chain0(port_block->priv->dev, type_data))
- 		return -EOPNOTSUPP;
- 
- 	switch (type) {
-@@ -275,7 +275,7 @@ static int ocelot_setup_tc_block_cb_flow
- }
- 
- static struct ocelot_port_block*
--ocelot_port_block_create(struct ocelot_port *port)
-+ocelot_port_block_create(struct ocelot_port_private *priv)
- {
- 	struct ocelot_port_block *port_block;
- 
-@@ -283,7 +283,7 @@ ocelot_port_block_create(struct ocelot_p
- 	if (!port_block)
- 		return NULL;
- 
--	port_block->port = port;
-+	port_block->priv = priv;
- 
- 	return port_block;
- }
-@@ -300,7 +300,7 @@ static void ocelot_tc_block_unbind(void
- 	ocelot_port_block_destroy(port_block);
- }
- 
--int ocelot_setup_tc_block_flower_bind(struct ocelot_port *port,
-+int ocelot_setup_tc_block_flower_bind(struct ocelot_port_private *priv,
- 				      struct flow_block_offload *f)
- {
- 	struct ocelot_port_block *port_block;
-@@ -311,14 +311,14 @@ int ocelot_setup_tc_block_flower_bind(st
- 		return -EOPNOTSUPP;
- 
- 	block_cb = flow_block_cb_lookup(f->block,
--					ocelot_setup_tc_block_cb_flower, port);
-+					ocelot_setup_tc_block_cb_flower, priv);
- 	if (!block_cb) {
--		port_block = ocelot_port_block_create(port);
-+		port_block = ocelot_port_block_create(priv);
- 		if (!port_block)
- 			return -ENOMEM;
- 
- 		block_cb = flow_block_cb_alloc(ocelot_setup_tc_block_cb_flower,
--					       port, port_block,
-+					       priv, port_block,
- 					       ocelot_tc_block_unbind);
- 		if (IS_ERR(block_cb)) {
- 			ret = PTR_ERR(block_cb);
-@@ -339,13 +339,13 @@ err_cb_register:
- 	return ret;
- }
- 
--void ocelot_setup_tc_block_flower_unbind(struct ocelot_port *port,
-+void ocelot_setup_tc_block_flower_unbind(struct ocelot_port_private *priv,
- 					 struct flow_block_offload *f)
- {
- 	struct flow_block_cb *block_cb;
- 
- 	block_cb = flow_block_cb_lookup(f->block,
--					ocelot_setup_tc_block_cb_flower, port);
-+					ocelot_setup_tc_block_cb_flower, priv);
- 	if (!block_cb)
- 		return;
- 
---- a/drivers/net/ethernet/mscc/ocelot_tc.c
-+++ b/drivers/net/ethernet/mscc/ocelot_tc.c
-@@ -9,17 +9,19 @@
- #include "ocelot_ace.h"
- #include <net/pkt_cls.h>
- 
--static int ocelot_setup_tc_cls_matchall(struct ocelot_port *port,
-+static int ocelot_setup_tc_cls_matchall(struct ocelot_port_private *priv,
- 					struct tc_cls_matchall_offload *f,
- 					bool ingress)
- {
- 	struct netlink_ext_ack *extack = f->common.extack;
-+	struct ocelot *ocelot = priv->port.ocelot;
- 	struct ocelot_policer pol = { 0 };
- 	struct flow_action_entry *action;
-+	int port = priv->chip_port;
- 	int err;
- 
--	netdev_dbg(port->dev, "%s: port %u command %d cookie %lu\n",
--		   __func__, port->chip_port, f->command, f->cookie);
-+	netdev_dbg(priv->dev, "%s: port %u command %d cookie %lu\n",
-+		   __func__, port, f->command, f->cookie);
- 
- 	if (!ingress) {
- 		NL_SET_ERR_MSG_MOD(extack, "Only ingress is supported");
-@@ -34,7 +36,7 @@ static int ocelot_setup_tc_cls_matchall(
- 			return -EOPNOTSUPP;
- 		}
- 
--		if (port->tc.block_shared) {
-+		if (priv->tc.block_shared) {
- 			NL_SET_ERR_MSG_MOD(extack,
- 					   "Rate limit is not supported on shared blocks");
- 			return -EOPNOTSUPP;
-@@ -47,7 +49,7 @@ static int ocelot_setup_tc_cls_matchall(
- 			return -EOPNOTSUPP;
- 		}
- 
--		if (port->tc.police_id && port->tc.police_id != f->cookie) {
-+		if (priv->tc.police_id && priv->tc.police_id != f->cookie) {
- 			NL_SET_ERR_MSG_MOD(extack,
- 					   "Only one policer per port is supported\n");
- 			return -EEXIST;
-@@ -58,28 +60,27 @@ static int ocelot_setup_tc_cls_matchall(
- 					 PSCHED_NS2TICKS(action->police.burst),
- 					 PSCHED_TICKS_PER_SEC);
- 
--		err = ocelot_port_policer_add(port->ocelot, port->chip_port,
--					      &pol);
-+		err = ocelot_port_policer_add(ocelot, port, &pol);
- 		if (err) {
- 			NL_SET_ERR_MSG_MOD(extack, "Could not add policer\n");
- 			return err;
- 		}
- 
--		port->tc.police_id = f->cookie;
--		port->tc.offload_cnt++;
-+		priv->tc.police_id = f->cookie;
-+		priv->tc.offload_cnt++;
- 		return 0;
- 	case TC_CLSMATCHALL_DESTROY:
--		if (port->tc.police_id != f->cookie)
-+		if (priv->tc.police_id != f->cookie)
- 			return -ENOENT;
- 
--		err = ocelot_port_policer_del(port->ocelot, port->chip_port);
-+		err = ocelot_port_policer_del(ocelot, port);
- 		if (err) {
- 			NL_SET_ERR_MSG_MOD(extack,
- 					   "Could not delete policer\n");
- 			return err;
- 		}
--		port->tc.police_id = 0;
--		port->tc.offload_cnt--;
-+		priv->tc.police_id = 0;
-+		priv->tc.offload_cnt--;
- 		return 0;
- 	case TC_CLSMATCHALL_STATS: /* fall through */
- 	default:
-@@ -91,21 +92,21 @@ static int ocelot_setup_tc_block_cb(enum
- 				    void *type_data,
- 				    void *cb_priv, bool ingress)
- {
--	struct ocelot_port *port = cb_priv;
-+	struct ocelot_port_private *priv = cb_priv;
- 
--	if (!tc_cls_can_offload_and_chain0(port->dev, type_data))
-+	if (!tc_cls_can_offload_and_chain0(priv->dev, type_data))
- 		return -EOPNOTSUPP;
- 
- 	switch (type) {
- 	case TC_SETUP_CLSMATCHALL:
--		netdev_dbg(port->dev, "tc_block_cb: TC_SETUP_CLSMATCHALL %s\n",
-+		netdev_dbg(priv->dev, "tc_block_cb: TC_SETUP_CLSMATCHALL %s\n",
- 			   ingress ? "ingress" : "egress");
- 
--		return ocelot_setup_tc_cls_matchall(port, type_data, ingress);
-+		return ocelot_setup_tc_cls_matchall(priv, type_data, ingress);
- 	case TC_SETUP_CLSFLOWER:
- 		return 0;
- 	default:
--		netdev_dbg(port->dev, "tc_block_cb: type %d %s\n",
-+		netdev_dbg(priv->dev, "tc_block_cb: type %d %s\n",
- 			   type,
- 			   ingress ? "ingress" : "egress");
- 
-@@ -131,19 +132,19 @@ static int ocelot_setup_tc_block_cb_eg(e
- 
- static LIST_HEAD(ocelot_block_cb_list);
- 
--static int ocelot_setup_tc_block(struct ocelot_port *port,
-+static int ocelot_setup_tc_block(struct ocelot_port_private *priv,
- 				 struct flow_block_offload *f)
- {
- 	struct flow_block_cb *block_cb;
- 	flow_setup_cb_t *cb;
- 	int err;
- 
--	netdev_dbg(port->dev, "tc_block command %d, binder_type %d\n",
-+	netdev_dbg(priv->dev, "tc_block command %d, binder_type %d\n",
- 		   f->command, f->binder_type);
- 
- 	if (f->binder_type == FLOW_BLOCK_BINDER_TYPE_CLSACT_INGRESS) {
- 		cb = ocelot_setup_tc_block_cb_ig;
--		port->tc.block_shared = f->block_shared;
-+		priv->tc.block_shared = f->block_shared;
- 	} else if (f->binder_type == FLOW_BLOCK_BINDER_TYPE_CLSACT_EGRESS) {
- 		cb = ocelot_setup_tc_block_cb_eg;
- 	} else {
-@@ -154,14 +155,14 @@ static int ocelot_setup_tc_block(struct
- 
- 	switch (f->command) {
- 	case FLOW_BLOCK_BIND:
--		if (flow_block_cb_is_busy(cb, port, &ocelot_block_cb_list))
-+		if (flow_block_cb_is_busy(cb, priv, &ocelot_block_cb_list))
- 			return -EBUSY;
- 
--		block_cb = flow_block_cb_alloc(cb, port, port, NULL);
-+		block_cb = flow_block_cb_alloc(cb, priv, priv, NULL);
- 		if (IS_ERR(block_cb))
- 			return PTR_ERR(block_cb);
- 
--		err = ocelot_setup_tc_block_flower_bind(port, f);
-+		err = ocelot_setup_tc_block_flower_bind(priv, f);
- 		if (err < 0) {
- 			flow_block_cb_free(block_cb);
- 			return err;
-@@ -170,11 +171,11 @@ static int ocelot_setup_tc_block(struct
- 		list_add_tail(&block_cb->driver_list, f->driver_block_list);
- 		return 0;
- 	case FLOW_BLOCK_UNBIND:
--		block_cb = flow_block_cb_lookup(f->block, cb, port);
-+		block_cb = flow_block_cb_lookup(f->block, cb, priv);
- 		if (!block_cb)
- 			return -ENOENT;
- 
--		ocelot_setup_tc_block_flower_unbind(port, f);
-+		ocelot_setup_tc_block_flower_unbind(priv, f);
- 		flow_block_cb_remove(block_cb, f);
- 		list_del(&block_cb->driver_list);
- 		return 0;
-@@ -186,11 +187,11 @@ static int ocelot_setup_tc_block(struct
- int ocelot_setup_tc(struct net_device *dev, enum tc_setup_type type,
- 		    void *type_data)
- {
--	struct ocelot_port *port = netdev_priv(dev);
-+	struct ocelot_port_private *priv = netdev_priv(dev);
- 
- 	switch (type) {
- 	case TC_SETUP_BLOCK:
--		return ocelot_setup_tc_block(port, type_data);
-+		return ocelot_setup_tc_block(priv, type_data);
- 	default:
- 		return -EOPNOTSUPP;
- 	}
diff --git a/target/linux/layerscape/patches-5.4/701-net-0245-net-mscc-ocelot-refactor-ethtool-callbacks.patch b/target/linux/layerscape/patches-5.4/701-net-0245-net-mscc-ocelot-refactor-ethtool-callbacks.patch
deleted file mode 100644
index 7b979d556b..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0245-net-mscc-ocelot-refactor-ethtool-callbacks.patch
+++ /dev/null
@@ -1,133 +0,0 @@
-From a155893c9c272b2ed1dc3b236d55ca8f651a6ea1 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Sat, 9 Nov 2019 15:02:54 +0200
-Subject: [PATCH] net: mscc: ocelot: refactor ethtool callbacks
-
-Convert them into an implementation that can be called from DSA as well.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 64 ++++++++++++++++++++++++++++----------
- 1 file changed, 47 insertions(+), 17 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -1185,10 +1185,9 @@ static const struct net_device_ops ocelo
- 	.ndo_do_ioctl			= ocelot_ioctl,
- };
- 
--static void ocelot_get_strings(struct net_device *netdev, u32 sset, u8 *data)
-+static void ocelot_get_strings(struct ocelot *ocelot, int port, u32 sset,
-+			       u8 *data)
- {
--	struct ocelot_port_private *priv = netdev_priv(netdev);
--	struct ocelot *ocelot = priv->port.ocelot;
- 	int i;
- 
- 	if (sset != ETH_SS_STATS)
-@@ -1199,6 +1198,16 @@ static void ocelot_get_strings(struct ne
- 		       ETH_GSTRING_LEN);
- }
- 
-+static void ocelot_port_get_strings(struct net_device *netdev, u32 sset,
-+				    u8 *data)
-+{
-+	struct ocelot_port_private *priv = netdev_priv(netdev);
-+	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
-+
-+	ocelot_get_strings(ocelot, port, sset, data);
-+}
-+
- static void ocelot_update_stats(struct ocelot *ocelot)
- {
- 	int i, j;
-@@ -1239,12 +1248,8 @@ static void ocelot_check_stats_work(stru
- 			   OCELOT_STATS_CHECK_DELAY);
- }
- 
--static void ocelot_get_ethtool_stats(struct net_device *dev,
--				     struct ethtool_stats *stats, u64 *data)
-+static void ocelot_get_ethtool_stats(struct ocelot *ocelot, int port, u64 *data)
- {
--	struct ocelot_port_private *priv = netdev_priv(dev);
--	struct ocelot *ocelot = priv->port.ocelot;
--	int port = priv->chip_port;
- 	int i;
- 
- 	/* check and update now */
-@@ -1255,25 +1260,37 @@ static void ocelot_get_ethtool_stats(str
- 		*data++ = ocelot->stats[port * ocelot->num_stats + i];
- }
- 
--static int ocelot_get_sset_count(struct net_device *dev, int sset)
-+static void ocelot_port_get_ethtool_stats(struct net_device *dev,
-+					  struct ethtool_stats *stats,
-+					  u64 *data)
- {
- 	struct ocelot_port_private *priv = netdev_priv(dev);
- 	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
- 
-+	ocelot_get_ethtool_stats(ocelot, port, data);
-+}
-+
-+static int ocelot_get_sset_count(struct ocelot *ocelot, int port, int sset)
-+{
- 	if (sset != ETH_SS_STATS)
- 		return -EOPNOTSUPP;
-+
- 	return ocelot->num_stats;
- }
- 
--static int ocelot_get_ts_info(struct net_device *dev,
--			      struct ethtool_ts_info *info)
-+static int ocelot_port_get_sset_count(struct net_device *dev, int sset)
- {
- 	struct ocelot_port_private *priv = netdev_priv(dev);
- 	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
- 
--	if (!ocelot->ptp)
--		return ethtool_op_get_ts_info(dev, info);
-+	return ocelot_get_sset_count(ocelot, port, sset);
-+}
- 
-+static int ocelot_get_ts_info(struct ocelot *ocelot, int port,
-+			      struct ethtool_ts_info *info)
-+{
- 	info->phc_index = ocelot->ptp_clock ?
- 			  ptp_clock_index(ocelot->ptp_clock) : -1;
- 	info->so_timestamping |= SOF_TIMESTAMPING_TX_SOFTWARE |
-@@ -1292,13 +1309,26 @@ static int ocelot_get_ts_info(struct net
- 	return 0;
- }
- 
-+static int ocelot_port_get_ts_info(struct net_device *dev,
-+				   struct ethtool_ts_info *info)
-+{
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
-+
-+	if (!ocelot->ptp)
-+		return ethtool_op_get_ts_info(dev, info);
-+
-+	return ocelot_get_ts_info(ocelot, port, info);
-+}
-+
- static const struct ethtool_ops ocelot_ethtool_ops = {
--	.get_strings		= ocelot_get_strings,
--	.get_ethtool_stats	= ocelot_get_ethtool_stats,
--	.get_sset_count		= ocelot_get_sset_count,
-+	.get_strings		= ocelot_port_get_strings,
-+	.get_ethtool_stats	= ocelot_port_get_ethtool_stats,
-+	.get_sset_count		= ocelot_port_get_sset_count,
- 	.get_link_ksettings	= phy_ethtool_get_link_ksettings,
- 	.set_link_ksettings	= phy_ethtool_set_link_ksettings,
--	.get_ts_info		= ocelot_get_ts_info,
-+	.get_ts_info		= ocelot_port_get_ts_info,
- };
- 
- static void ocelot_bridge_stp_state_set(struct ocelot *ocelot, int port,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0246-net-mscc-ocelot-limit-vlan-ingress-filtering-to-actu.patch b/target/linux/layerscape/patches-5.4/701-net-0246-net-mscc-ocelot-limit-vlan-ingress-filtering-to-actu.patch
deleted file mode 100644
index 532db74c83..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0246-net-mscc-ocelot-limit-vlan-ingress-filtering-to-actu.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From acc105226493e7cfdb6e72d130c36f21e951fc1f Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Sat, 9 Nov 2019 15:02:55 +0200
-Subject: [PATCH] net: mscc: ocelot: limit vlan ingress filtering to actual
- number of ports
-
-The VSC7514 switch (Ocelot) is a 10-port device, while VSC9959 (Felix)
-is 6-port. Therefore the VLAN filtering mask would be out of bounds when
-calling for this new switch. Fix that.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -389,7 +389,8 @@ static void ocelot_vlan_init(struct ocel
- 	/* Set vlan ingress filter mask to all ports but the CPU port by
- 	 * default.
- 	 */
--	ocelot_write(ocelot, GENMASK(9, 0), ANA_VLANMASK);
-+	ocelot_write(ocelot, GENMASK(ocelot->num_phys_ports - 1, 0),
-+		     ANA_VLANMASK);
- 
- 	for (port = 0; port < ocelot->num_phys_ports; port++) {
- 		ocelot_write_gix(ocelot, 0, REW_PORT_VLAN_CFG, port);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0247-net-mscc-ocelot-move-port-initialization-into-separa.patch b/target/linux/layerscape/patches-5.4/701-net-0247-net-mscc-ocelot-move-port-initialization-into-separa.patch
deleted file mode 100644
index a6bbdd67fe..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0247-net-mscc-ocelot-move-port-initialization-into-separa.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From 66f4bb358787f4f52de0614a92f9e4130d1e0e01 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Sat, 9 Nov 2019 15:02:56 +0200
-Subject: [PATCH] net: mscc: ocelot: move port initialization into separate
- function
-
-We need a function for the DSA front-end that does none of the
-net_device registration, but initializes the hardware ports.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 45 ++++++++++++++++++++------------------
- 1 file changed, 24 insertions(+), 21 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -2132,6 +2132,28 @@ static int ocelot_init_timestamp(struct
- 	return 0;
- }
- 
-+static void ocelot_init_port(struct ocelot *ocelot, int port)
-+{
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+
-+	INIT_LIST_HEAD(&ocelot_port->skbs);
-+
-+	/* Basic L2 initialization */
-+
-+	/* Drop frames with multicast source address */
-+	ocelot_rmw_gix(ocelot, ANA_PORT_DROP_CFG_DROP_MC_SMAC_ENA,
-+		       ANA_PORT_DROP_CFG_DROP_MC_SMAC_ENA,
-+		       ANA_PORT_DROP_CFG, port);
-+
-+	/* Set default VLAN and tag type to 8021Q. */
-+	ocelot_rmw_gix(ocelot, REW_PORT_VLAN_CFG_PORT_TPID(ETH_P_8021Q),
-+		       REW_PORT_VLAN_CFG_PORT_TPID_M,
-+		       REW_PORT_VLAN_CFG, port);
-+
-+	/* Enable vcap lookups */
-+	ocelot_vcap_enable(ocelot, port);
-+}
-+
- int ocelot_probe_port(struct ocelot *ocelot, u8 port,
- 		      void __iomem *regs,
- 		      struct phy_device *phy)
-@@ -2139,7 +2161,6 @@ int ocelot_probe_port(struct ocelot *oce
- 	struct ocelot_port_private *priv;
- 	struct ocelot_port *ocelot_port;
- 	struct net_device *dev;
--	u32 val;
- 	int err;
- 
- 	dev = alloc_etherdev(sizeof(struct ocelot_port_private));
-@@ -2167,32 +2188,14 @@ int ocelot_probe_port(struct ocelot *oce
- 	ocelot_mact_learn(ocelot, PGID_CPU, dev->dev_addr, ocelot_port->pvid,
- 			  ENTRYTYPE_LOCKED);
- 
--	INIT_LIST_HEAD(&ocelot_port->skbs);
-+	ocelot_init_port(ocelot, port);
- 
- 	err = register_netdev(dev);
- 	if (err) {
- 		dev_err(ocelot->dev, "register_netdev failed\n");
--		goto err_register_netdev;
-+		free_netdev(dev);
- 	}
- 
--	/* Basic L2 initialization */
--
--	/* Drop frames with multicast source address */
--	val = ANA_PORT_DROP_CFG_DROP_MC_SMAC_ENA;
--	ocelot_rmw_gix(ocelot, val, val, ANA_PORT_DROP_CFG, port);
--
--	/* Set default VLAN and tag type to 8021Q. */
--	ocelot_rmw_gix(ocelot, REW_PORT_VLAN_CFG_PORT_TPID(ETH_P_8021Q),
--		       REW_PORT_VLAN_CFG_PORT_TPID_M,
--		       REW_PORT_VLAN_CFG, port);
--
--	/* Enable vcap lookups */
--	ocelot_vcap_enable(ocelot, port);
--
--	return 0;
--
--err_register_netdev:
--	free_netdev(dev);
- 	return err;
- }
- EXPORT_SYMBOL(ocelot_probe_port);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0248-net-mscc-ocelot-separate-the-common-implementation-o.patch b/target/linux/layerscape/patches-5.4/701-net-0248-net-mscc-ocelot-separate-the-common-implementation-o.patch
deleted file mode 100644
index f0b6393752..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0248-net-mscc-ocelot-separate-the-common-implementation-o.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From ac918399cae8b62f58f50b40bf8037d0fa9353eb Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Sat, 9 Nov 2019 15:02:57 +0200
-Subject: [PATCH] net: mscc: ocelot: separate the common implementation of
- ndo_open and ndo_stop
-
-Allow these functions to be called from the .port_enable and
-.port_disable callbacks of DSA.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 36 ++++++++++++++++++++++++++----------
- 1 file changed, 26 insertions(+), 10 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -536,13 +536,9 @@ static void ocelot_port_adjust_link(stru
- 	ocelot_write(ocelot, ocelot_wm_enc(atop_wm), SYS_ATOP_TOT_CFG);
- }
- 
--static int ocelot_port_open(struct net_device *dev)
-+static void ocelot_port_enable(struct ocelot *ocelot, int port,
-+			       struct phy_device *phy)
- {
--	struct ocelot_port_private *priv = netdev_priv(dev);
--	struct ocelot *ocelot = priv->port.ocelot;
--	int port = priv->chip_port;
--	int err;
--
- 	/* Enable receiving frames on the port, and activate auto-learning of
- 	 * MAC addresses.
- 	 */
-@@ -550,6 +546,14 @@ static int ocelot_port_open(struct net_d
- 			 ANA_PORT_PORT_CFG_RECV_ENA |
- 			 ANA_PORT_PORT_CFG_PORTID_VAL(port),
- 			 ANA_PORT_PORT_CFG, port);
-+}
-+
-+static int ocelot_port_open(struct net_device *dev)
-+{
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
-+	int err;
- 
- 	if (priv->serdes) {
- 		err = phy_set_mode_ext(priv->serdes, PHY_MODE_ETHERNET,
-@@ -571,21 +575,33 @@ static int ocelot_port_open(struct net_d
- 
- 	phy_attached_info(priv->phy);
- 	phy_start(priv->phy);
-+
-+	ocelot_port_enable(ocelot, port, priv->phy);
-+
- 	return 0;
- }
- 
-+static void ocelot_port_disable(struct ocelot *ocelot, int port)
-+{
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+
-+	ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG);
-+	ocelot_rmw_rix(ocelot, 0, QSYS_SWITCH_PORT_MODE_PORT_ENA,
-+		       QSYS_SWITCH_PORT_MODE, port);
-+}
-+
- static int ocelot_port_stop(struct net_device *dev)
- {
- 	struct ocelot_port_private *priv = netdev_priv(dev);
--	struct ocelot_port *port = &priv->port;
-+	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
- 
- 	phy_disconnect(priv->phy);
- 
- 	dev->phydev = NULL;
- 
--	ocelot_port_writel(port, 0, DEV_MAC_ENA_CFG);
--	ocelot_rmw_rix(port->ocelot, 0, QSYS_SWITCH_PORT_MODE_PORT_ENA,
--		       QSYS_SWITCH_PORT_MODE, priv->chip_port);
-+	ocelot_port_disable(ocelot, port);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0249-net-mscc-ocelot-initialize-list-of-multicast-address.patch b/target/linux/layerscape/patches-5.4/701-net-0249-net-mscc-ocelot-initialize-list-of-multicast-address.patch
deleted file mode 100644
index b0c349ec37..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0249-net-mscc-ocelot-initialize-list-of-multicast-address.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 0a7e5a60bdd559d092912adb34bc99c6457d3fb6 Mon Sep 17 00:00:00 2001
-From: Claudiu Manoil <claudiu.manoil@nxp.com>
-Date: Sat, 9 Nov 2019 15:02:58 +0200
-Subject: [PATCH] net: mscc: ocelot: initialize list of multicast addresses in
- common code
-
-This is just common path code that belongs to ocelot_init,
-it has nothing to do with a specific SoC/board instance.
-
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c       | 1 +
- drivers/net/ethernet/mscc/ocelot_board.c | 1 -
- 2 files changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -2242,6 +2242,7 @@ int ocelot_init(struct ocelot *ocelot)
- 	if (!ocelot->stats_queue)
- 		return -ENOMEM;
- 
-+	INIT_LIST_HEAD(&ocelot->multicast);
- 	ocelot_mact_init(ocelot);
- 	ocelot_vlan_init(ocelot);
- 	ocelot_ace_init(ocelot);
---- a/drivers/net/ethernet/mscc/ocelot_board.c
-+++ b/drivers/net/ethernet/mscc/ocelot_board.c
-@@ -372,7 +372,6 @@ static int mscc_ocelot_probe(struct plat
- 	ocelot->ports = devm_kcalloc(&pdev->dev, ocelot->num_phys_ports,
- 				     sizeof(struct ocelot_port *), GFP_KERNEL);
- 
--	INIT_LIST_HEAD(&ocelot->multicast);
- 	ocelot_init(ocelot);
- 
- 	for_each_available_child_of_node(ports, portnp) {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0250-net-mscc-ocelot-refactor-adjust_link-into-a-netdev-i.patch b/target/linux/layerscape/patches-5.4/701-net-0250-net-mscc-ocelot-refactor-adjust_link-into-a-netdev-i.patch
deleted file mode 100644
index 7f80cd4a88..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0250-net-mscc-ocelot-refactor-adjust_link-into-a-netdev-i.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From f8c221dc7383a50defcc5b96595e092159dbe928 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Sat, 9 Nov 2019 15:02:59 +0200
-Subject: [PATCH] net: mscc: ocelot: refactor adjust_link into a
- netdev-independent function
-
-This will be called from the Felix DSA frontend, which will work in
-PHYLIB compatibility mode initially.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 27 +++++++++++++++++----------
- 1 file changed, 17 insertions(+), 10 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -410,15 +410,13 @@ static u16 ocelot_wm_enc(u16 value)
- 	return value;
- }
- 
--static void ocelot_port_adjust_link(struct net_device *dev)
-+static void ocelot_adjust_link(struct ocelot *ocelot, int port,
-+			       struct phy_device *phydev)
- {
--	struct ocelot_port_private *priv = netdev_priv(dev);
--	struct ocelot_port *ocelot_port = &priv->port;
--	struct ocelot *ocelot = ocelot_port->ocelot;
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
- 	int speed, atop_wm, mode = 0;
--	u8 port = priv->chip_port;
- 
--	switch (dev->phydev->speed) {
-+	switch (phydev->speed) {
- 	case SPEED_10:
- 		speed = OCELOT_SPEED_10;
- 		break;
-@@ -434,14 +432,14 @@ static void ocelot_port_adjust_link(stru
- 		mode = DEV_MAC_MODE_CFG_GIGA_MODE_ENA;
- 		break;
- 	default:
--		netdev_err(dev, "Unsupported PHY speed: %d\n",
--			   dev->phydev->speed);
-+		dev_err(ocelot->dev, "Unsupported PHY speed on port %d: %d\n",
-+			port, phydev->speed);
- 		return;
- 	}
- 
--	phy_print_status(dev->phydev);
-+	phy_print_status(phydev);
- 
--	if (!dev->phydev->link)
-+	if (!phydev->link)
- 		return;
- 
- 	/* Only full duplex supported for now */
-@@ -536,6 +534,15 @@ static void ocelot_port_adjust_link(stru
- 	ocelot_write(ocelot, ocelot_wm_enc(atop_wm), SYS_ATOP_TOT_CFG);
- }
- 
-+static void ocelot_port_adjust_link(struct net_device *dev)
-+{
-+	struct ocelot_port_private *priv = netdev_priv(dev);
-+	struct ocelot *ocelot = priv->port.ocelot;
-+	int port = priv->chip_port;
-+
-+	ocelot_adjust_link(ocelot, port, dev->phydev);
-+}
-+
- static void ocelot_port_enable(struct ocelot *ocelot, int port,
- 			       struct phy_device *phy)
- {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0251-net-mscc-ocelot-split-assignment-of-the-cpu-port-int.patch b/target/linux/layerscape/patches-5.4/701-net-0251-net-mscc-ocelot-split-assignment-of-the-cpu-port-int.patch
deleted file mode 100644
index 8fa0bca935..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0251-net-mscc-ocelot-split-assignment-of-the-cpu-port-int.patch
+++ /dev/null
@@ -1,163 +0,0 @@
-From c6f39379529e74eccbe317e70bb11d18110c63d4 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Sat, 9 Nov 2019 15:03:00 +0200
-Subject: [PATCH] net: mscc: ocelot: split assignment of the cpu port into a
- separate function
-
-Now that the places that configure routing destinations for the CPU port
-have been marked as such, allow callers to specify their own CPU port
-that is different than ocelot->num_phys_ports. A user will be the Felix
-DSA driver, where the CPU port is one of the physical ports (NPI mode).
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c       | 65 +++++++++++++++++++++-----------
- drivers/net/ethernet/mscc/ocelot.h       | 12 ++++++
- drivers/net/ethernet/mscc/ocelot_board.c |  2 +
- 3 files changed, 57 insertions(+), 22 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -380,12 +380,6 @@ static void ocelot_vlan_init(struct ocel
- 	ocelot->vlan_mask[0] = GENMASK(ocelot->num_phys_ports - 1, 0);
- 	ocelot_vlant_set_mask(ocelot, 0, ocelot->vlan_mask[0]);
- 
--	/* Configure the CPU port to be VLAN aware */
--	ocelot_write_gix(ocelot, ANA_PORT_VLAN_CFG_VLAN_VID(0) |
--				 ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA |
--				 ANA_PORT_VLAN_CFG_VLAN_POP_CNT(1),
--			 ANA_PORT_VLAN_CFG, ocelot->num_phys_ports);
--
- 	/* Set vlan ingress filter mask to all ports but the CPU port by
- 	 * default.
- 	 */
-@@ -2223,11 +2217,52 @@ int ocelot_probe_port(struct ocelot *oce
- }
- EXPORT_SYMBOL(ocelot_probe_port);
- 
-+void ocelot_set_cpu_port(struct ocelot *ocelot, int cpu,
-+			 enum ocelot_tag_prefix injection,
-+			 enum ocelot_tag_prefix extraction)
-+{
-+	/* Configure and enable the CPU port. */
-+	ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, cpu);
-+	ocelot_write_rix(ocelot, BIT(cpu), ANA_PGID_PGID, PGID_CPU);
-+	ocelot_write_gix(ocelot, ANA_PORT_PORT_CFG_RECV_ENA |
-+			 ANA_PORT_PORT_CFG_PORTID_VAL(cpu),
-+			 ANA_PORT_PORT_CFG, cpu);
-+
-+	/* If the CPU port is a physical port, set up the port in Node
-+	 * Processor Interface (NPI) mode. This is the mode through which
-+	 * frames can be injected from and extracted to an external CPU.
-+	 * Only one port can be an NPI at the same time.
-+	 */
-+	if (cpu < ocelot->num_phys_ports) {
-+		ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M |
-+			     QSYS_EXT_CPU_CFG_EXT_CPU_PORT(cpu),
-+			     QSYS_EXT_CPU_CFG);
-+	}
-+
-+	/* CPU port Injection/Extraction configuration */
-+	ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
-+			 QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
-+			 QSYS_SWITCH_PORT_MODE_PORT_ENA,
-+			 QSYS_SWITCH_PORT_MODE, cpu);
-+	ocelot_write_rix(ocelot, SYS_PORT_MODE_INCL_XTR_HDR(extraction) |
-+			 SYS_PORT_MODE_INCL_INJ_HDR(injection),
-+			 SYS_PORT_MODE, cpu);
-+
-+	/* Configure the CPU port to be VLAN aware */
-+	ocelot_write_gix(ocelot, ANA_PORT_VLAN_CFG_VLAN_VID(0) |
-+				 ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA |
-+				 ANA_PORT_VLAN_CFG_VLAN_POP_CNT(1),
-+			 ANA_PORT_VLAN_CFG, cpu);
-+
-+	ocelot->cpu = cpu;
-+}
-+EXPORT_SYMBOL(ocelot_set_cpu_port);
-+
- int ocelot_init(struct ocelot *ocelot)
- {
--	u32 port;
--	int i, ret, cpu = ocelot->num_phys_ports;
- 	char queue_name[32];
-+	int i, ret;
-+	u32 port;
- 
- 	ocelot->lags = devm_kcalloc(ocelot->dev, ocelot->num_phys_ports,
- 				    sizeof(u32), GFP_KERNEL);
-@@ -2307,13 +2342,6 @@ int ocelot_init(struct ocelot *ocelot)
- 		ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, PGID_SRC + port);
- 	}
- 
--	/* Configure and enable the CPU port. */
--	ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, cpu);
--	ocelot_write_rix(ocelot, BIT(cpu), ANA_PGID_PGID, PGID_CPU);
--	ocelot_write_gix(ocelot, ANA_PORT_PORT_CFG_RECV_ENA |
--			 ANA_PORT_PORT_CFG_PORTID_VAL(cpu),
--			 ANA_PORT_PORT_CFG, cpu);
--
- 	/* Allow broadcast MAC frames. */
- 	for (i = ocelot->num_phys_ports + 1; i < PGID_CPU; i++) {
- 		u32 val = ANA_PGID_PGID_PGID(GENMASK(ocelot->num_phys_ports - 1, 0));
-@@ -2326,13 +2354,6 @@ int ocelot_init(struct ocelot *ocelot)
- 	ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, PGID_MCIPV4);
- 	ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, PGID_MCIPV6);
- 
--	/* CPU port Injection/Extraction configuration */
--	ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
--			 QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
--			 QSYS_SWITCH_PORT_MODE_PORT_ENA,
--			 QSYS_SWITCH_PORT_MODE, cpu);
--	ocelot_write_rix(ocelot, SYS_PORT_MODE_INCL_XTR_HDR(1) |
--			 SYS_PORT_MODE_INCL_INJ_HDR(1), SYS_PORT_MODE, cpu);
- 	/* Allow manual injection via DEVCPU_QS registers, and byte swap these
- 	 * registers endianness.
- 	 */
---- a/drivers/net/ethernet/mscc/ocelot.h
-+++ b/drivers/net/ethernet/mscc/ocelot.h
-@@ -427,6 +427,13 @@ struct ocelot_multicast {
- 	u16 ports;
- };
- 
-+enum ocelot_tag_prefix {
-+	OCELOT_TAG_PREFIX_DISABLED	= 0,
-+	OCELOT_TAG_PREFIX_NONE,
-+	OCELOT_TAG_PREFIX_SHORT,
-+	OCELOT_TAG_PREFIX_LONG,
-+};
-+
- struct ocelot_port;
- 
- struct ocelot_stat_layout {
-@@ -455,6 +462,7 @@ struct ocelot {
- 
- 	u8 num_phys_ports;
- 	u8 num_cpu_ports;
-+	u8 cpu;
- 	struct ocelot_port **ports;
- 
- 	u32 *lags;
-@@ -552,6 +560,10 @@ int ocelot_probe_port(struct ocelot *oce
- 		      void __iomem *regs,
- 		      struct phy_device *phy);
- 
-+void ocelot_set_cpu_port(struct ocelot *ocelot, int cpu,
-+			 enum ocelot_tag_prefix injection,
-+			 enum ocelot_tag_prefix extraction);
-+
- extern struct notifier_block ocelot_netdevice_nb;
- extern struct notifier_block ocelot_switchdev_nb;
- extern struct notifier_block ocelot_switchdev_blocking_nb;
---- a/drivers/net/ethernet/mscc/ocelot_board.c
-+++ b/drivers/net/ethernet/mscc/ocelot_board.c
-@@ -373,6 +373,8 @@ static int mscc_ocelot_probe(struct plat
- 				     sizeof(struct ocelot_port *), GFP_KERNEL);
- 
- 	ocelot_init(ocelot);
-+	ocelot_set_cpu_port(ocelot, ocelot->num_phys_ports,
-+			    OCELOT_TAG_PREFIX_NONE, OCELOT_TAG_PREFIX_NONE);
- 
- 	for_each_available_child_of_node(ports, portnp) {
- 		struct ocelot_port_private *priv;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0252-net-mscc-ocelot-don-t-hardcode-the-number-of-the-CPU.patch b/target/linux/layerscape/patches-5.4/701-net-0252-net-mscc-ocelot-don-t-hardcode-the-number-of-the-CPU.patch
deleted file mode 100644
index 7ddc5753f6..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0252-net-mscc-ocelot-don-t-hardcode-the-number-of-the-CPU.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From d176f477fd2acded12356088c0f67dee059facb5 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Sat, 9 Nov 2019 15:03:01 +0200
-Subject: [PATCH] net: mscc: ocelot: don't hardcode the number of the CPU port
-
-VSC7514 is a 10-port switch with 2 extra "CPU ports" (targets in the
-queuing subsystem for terminating traffic locally).
-
-There are 2 issues with hardcoding the CPU port as #10:
-- It is not clear which snippets of the code are configuring something
-  for one of the CPU ports, and which snippets are just doing something
-  related to the number of physical ports.
-- Actually any physical port can act as a CPU port connected to an
-  external CPU (in addition to the local CPU). This is called NPI mode
-  (Node Processor Interface) and is the way that the 6-port VSC9959
-  (Felix) switch is integrated inside NXP LS1028A (the "local management
-  CPU" functionality is not used there).
-
-This patch makes it clear that the ocelot_bridge_stp_state_set function
-operates on the CPU port (by making it an implicit member of the
-bridging domain), and at the same time adds logic for the NPI port (aka
-a physical port) to play the role of a CPU port (it shouldn't be part of
-bridge_fwd_mask, as it's not explicitly enslaved to a bridge).
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 11 +++++++----
- 1 file changed, 7 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -1380,7 +1380,7 @@ static void ocelot_bridge_stp_state_set(
- 	 * a source for the other ports.
- 	 */
- 	for (p = 0; p < ocelot->num_phys_ports; p++) {
--		if (ocelot->bridge_fwd_mask & BIT(p)) {
-+		if (p == ocelot->cpu || (ocelot->bridge_fwd_mask & BIT(p))) {
- 			unsigned long mask = ocelot->bridge_fwd_mask & ~BIT(p);
- 
- 			for (i = 0; i < ocelot->num_phys_ports; i++) {
-@@ -1395,15 +1395,18 @@ static void ocelot_bridge_stp_state_set(
- 				}
- 			}
- 
--			ocelot_write_rix(ocelot,
--					 BIT(ocelot->num_phys_ports) | mask,
-+			/* Avoid the NPI port from looping back to itself */
-+			if (p != ocelot->cpu)
-+				mask |= BIT(ocelot->cpu);
-+
-+			ocelot_write_rix(ocelot, mask,
- 					 ANA_PGID_PGID, PGID_SRC + p);
- 		} else {
- 			/* Only the CPU port, this is compatible with link
- 			 * aggregation.
- 			 */
- 			ocelot_write_rix(ocelot,
--					 BIT(ocelot->num_phys_ports),
-+					 BIT(ocelot->cpu),
- 					 ANA_PGID_PGID, PGID_SRC + p);
- 		}
- 	}
diff --git a/target/linux/layerscape/patches-5.4/701-net-0253-net-mscc-ocelot-move-resource-ioremap-and-regmap-ini.patch b/target/linux/layerscape/patches-5.4/701-net-0253-net-mscc-ocelot-move-resource-ioremap-and-regmap-ini.patch
deleted file mode 100644
index 47f53ebd51..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0253-net-mscc-ocelot-move-resource-ioremap-and-regmap-ini.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From 01c0da9c8cd3ff6cbe0ced8e28505d4195f60db4 Mon Sep 17 00:00:00 2001
-From: Claudiu Manoil <claudiu.manoil@nxp.com>
-Date: Thu, 14 Nov 2019 17:03:20 +0200
-Subject: [PATCH] net: mscc: ocelot: move resource ioremap and regmap init to
- common code
-
-Let's make this ioremap and regmap init code common.  It should not
-be platform dependent as it should be usable by PCI devices too.
-Use better names where necessary to avoid clashes.
-
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.h       |  4 +---
- drivers/net/ethernet/mscc/ocelot_board.c | 17 ++++++++++-------
- drivers/net/ethernet/mscc/ocelot_io.c    | 14 +++++---------
- 3 files changed, 16 insertions(+), 19 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.h
-+++ b/drivers/net/ethernet/mscc/ocelot.h
-@@ -546,9 +546,7 @@ void ocelot_port_writel(struct ocelot_po
- 
- int ocelot_regfields_init(struct ocelot *ocelot,
- 			  const struct reg_field *const regfields);
--struct regmap *ocelot_io_platform_init(struct ocelot *ocelot,
--				       struct platform_device *pdev,
--				       const char *name);
-+struct regmap *ocelot_regmap_init(struct ocelot *ocelot, struct resource *res);
- 
- #define ocelot_field_write(ocelot, reg, val) regmap_field_write((ocelot)->regfields[(reg)], (val))
- #define ocelot_field_read(ocelot, reg, val) regmap_field_read((ocelot)->regfields[(reg)], (val))
---- a/drivers/net/ethernet/mscc/ocelot_board.c
-+++ b/drivers/net/ethernet/mscc/ocelot_board.c
-@@ -276,7 +276,7 @@ static int mscc_ocelot_probe(struct plat
- 		enum ocelot_target id;
- 		char *name;
- 		u8 optional:1;
--	} res[] = {
-+	} io_target[] = {
- 		{ SYS, "sys" },
- 		{ REW, "rew" },
- 		{ QSYS, "qsys" },
-@@ -296,20 +296,23 @@ static int mscc_ocelot_probe(struct plat
- 	platform_set_drvdata(pdev, ocelot);
- 	ocelot->dev = &pdev->dev;
- 
--	for (i = 0; i < ARRAY_SIZE(res); i++) {
-+	for (i = 0; i < ARRAY_SIZE(io_target); i++) {
- 		struct regmap *target;
-+		struct resource *res;
- 
--		target = ocelot_io_platform_init(ocelot, pdev, res[i].name);
-+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+						   io_target[i].name);
-+
-+		target = ocelot_regmap_init(ocelot, res);
- 		if (IS_ERR(target)) {
--			if (res[i].optional) {
--				ocelot->targets[res[i].id] = NULL;
-+			if (io_target[i].optional) {
-+				ocelot->targets[io_target[i].id] = NULL;
- 				continue;
- 			}
--
- 			return PTR_ERR(target);
- 		}
- 
--		ocelot->targets[res[i].id] = target;
-+		ocelot->targets[io_target[i].id] = target;
- 	}
- 
- 	hsio = syscon_regmap_lookup_by_compatible("mscc,ocelot-hsio");
---- a/drivers/net/ethernet/mscc/ocelot_io.c
-+++ b/drivers/net/ethernet/mscc/ocelot_io.c
-@@ -97,20 +97,16 @@ static struct regmap_config ocelot_regma
- 	.reg_stride	= 4,
- };
- 
--struct regmap *ocelot_io_platform_init(struct ocelot *ocelot,
--				       struct platform_device *pdev,
--				       const char *name)
-+struct regmap *ocelot_regmap_init(struct ocelot *ocelot, struct resource *res)
- {
--	struct resource *res;
- 	void __iomem *regs;
- 
--	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
- 	regs = devm_ioremap_resource(ocelot->dev, res);
- 	if (IS_ERR(regs))
- 		return ERR_CAST(regs);
- 
--	ocelot_regmap_config.name = name;
--	return devm_regmap_init_mmio(ocelot->dev, regs,
--				     &ocelot_regmap_config);
-+	ocelot_regmap_config.name = res->name;
-+
-+	return devm_regmap_init_mmio(ocelot->dev, regs, &ocelot_regmap_config);
- }
--EXPORT_SYMBOL(ocelot_io_platform_init);
-+EXPORT_SYMBOL(ocelot_regmap_init);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0254-net-mscc-ocelot-filter-out-ocelot-SoC-specific-PCS-c.patch b/target/linux/layerscape/patches-5.4/701-net-0254-net-mscc-ocelot-filter-out-ocelot-SoC-specific-PCS-c.patch
deleted file mode 100644
index 73a45bb2d6..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0254-net-mscc-ocelot-filter-out-ocelot-SoC-specific-PCS-c.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-From 6960d2c4f5e95ae304a62af249d6c92a2d952601 Mon Sep 17 00:00:00 2001
-From: Claudiu Manoil <claudiu.manoil@nxp.com>
-Date: Thu, 14 Nov 2019 17:03:21 +0200
-Subject: [PATCH] net: mscc: ocelot: filter out ocelot SoC specific PCS config
- from common path
-
-The adjust_link routine should be generic enough to be (re)used by
-any SoC that integrates a switch core compatible with the Ocelot
-core switch driver.  Currently all configurations are generic except
-for the PCS settings that are SoC specific.  Move these out to the
-Ocelot SoC/board instance.
-
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c       | 19 ++-----------------
- drivers/net/ethernet/mscc/ocelot.h       |  8 +++++++-
- drivers/net/ethernet/mscc/ocelot_board.c | 29 ++++++++++++++++++++++++++++-
- drivers/net/ethernet/mscc/ocelot_regs.c  |  3 ++-
- 4 files changed, 39 insertions(+), 20 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -455,23 +455,8 @@ static void ocelot_adjust_link(struct oc
- 	ocelot_port_writel(ocelot_port, DEV_MAC_HDX_CFG_LATE_COL_POS(67),
- 			   DEV_MAC_HDX_CFG);
- 
--	/* Disable HDX fast control */
--	ocelot_port_writel(ocelot_port, DEV_PORT_MISC_HDX_FAST_DIS,
--			   DEV_PORT_MISC);
--
--	/* SGMII only for now */
--	ocelot_port_writel(ocelot_port, PCS1G_MODE_CFG_SGMII_MODE_ENA,
--			   PCS1G_MODE_CFG);
--	ocelot_port_writel(ocelot_port, PCS1G_SD_CFG_SD_SEL, PCS1G_SD_CFG);
--
--	/* Enable PCS */
--	ocelot_port_writel(ocelot_port, PCS1G_CFG_PCS_ENA, PCS1G_CFG);
--
--	/* No aneg on SGMII */
--	ocelot_port_writel(ocelot_port, 0, PCS1G_ANEG_CFG);
--
--	/* No loopback */
--	ocelot_port_writel(ocelot_port, 0, PCS1G_LB_CFG);
-+	if (ocelot->ops->pcs_init)
-+		ocelot->ops->pcs_init(ocelot, port);
- 
- 	/* Set Max Length and maximum tags allowed */
- 	ocelot_port_writel(ocelot_port, VLAN_ETH_FRAME_LEN,
---- a/drivers/net/ethernet/mscc/ocelot.h
-+++ b/drivers/net/ethernet/mscc/ocelot.h
-@@ -435,13 +435,19 @@ enum ocelot_tag_prefix {
- };
- 
- struct ocelot_port;
-+struct ocelot;
- 
- struct ocelot_stat_layout {
- 	u32 offset;
- 	char name[ETH_GSTRING_LEN];
- };
- 
-+struct ocelot_ops {
-+	void (*pcs_init)(struct ocelot *ocelot, int port);
-+};
-+
- struct ocelot {
-+	const struct ocelot_ops *ops;
- 	struct device *dev;
- 
- 	struct regmap *targets[TARGET_MAX];
-@@ -553,7 +559,7 @@ struct regmap *ocelot_regmap_init(struct
- 
- int ocelot_init(struct ocelot *ocelot);
- void ocelot_deinit(struct ocelot *ocelot);
--int ocelot_chip_init(struct ocelot *ocelot);
-+int ocelot_chip_init(struct ocelot *ocelot, const struct ocelot_ops *ops);
- int ocelot_probe_port(struct ocelot *ocelot, u8 port,
- 		      void __iomem *regs,
- 		      struct phy_device *phy);
---- a/drivers/net/ethernet/mscc/ocelot_board.c
-+++ b/drivers/net/ethernet/mscc/ocelot_board.c
-@@ -262,6 +262,33 @@ static const struct of_device_id mscc_oc
- };
- MODULE_DEVICE_TABLE(of, mscc_ocelot_match);
- 
-+static void ocelot_port_pcs_init(struct ocelot *ocelot, int port)
-+{
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+
-+	/* Disable HDX fast control */
-+	ocelot_port_writel(ocelot_port, DEV_PORT_MISC_HDX_FAST_DIS,
-+			   DEV_PORT_MISC);
-+
-+	/* SGMII only for now */
-+	ocelot_port_writel(ocelot_port, PCS1G_MODE_CFG_SGMII_MODE_ENA,
-+			   PCS1G_MODE_CFG);
-+	ocelot_port_writel(ocelot_port, PCS1G_SD_CFG_SD_SEL, PCS1G_SD_CFG);
-+
-+	/* Enable PCS */
-+	ocelot_port_writel(ocelot_port, PCS1G_CFG_PCS_ENA, PCS1G_CFG);
-+
-+	/* No aneg on SGMII */
-+	ocelot_port_writel(ocelot_port, 0, PCS1G_ANEG_CFG);
-+
-+	/* No loopback */
-+	ocelot_port_writel(ocelot_port, 0, PCS1G_LB_CFG);
-+}
-+
-+static const struct ocelot_ops ocelot_ops = {
-+	.pcs_init		= ocelot_port_pcs_init,
-+};
-+
- static int mscc_ocelot_probe(struct platform_device *pdev)
- {
- 	struct device_node *np = pdev->dev.of_node;
-@@ -323,7 +350,7 @@ static int mscc_ocelot_probe(struct plat
- 
- 	ocelot->targets[HSIO] = hsio;
- 
--	err = ocelot_chip_init(ocelot);
-+	err = ocelot_chip_init(ocelot, &ocelot_ops);
- 	if (err)
- 		return err;
- 
---- a/drivers/net/ethernet/mscc/ocelot_regs.c
-+++ b/drivers/net/ethernet/mscc/ocelot_regs.c
-@@ -423,7 +423,7 @@ static void ocelot_pll5_init(struct ocel
- 		     HSIO_PLL5G_CFG2_AMPC_SEL(0x10));
- }
- 
--int ocelot_chip_init(struct ocelot *ocelot)
-+int ocelot_chip_init(struct ocelot *ocelot, const struct ocelot_ops *ops)
- {
- 	int ret;
- 
-@@ -431,6 +431,7 @@ int ocelot_chip_init(struct ocelot *ocel
- 	ocelot->stats_layout = ocelot_stats_layout;
- 	ocelot->num_stats = ARRAY_SIZE(ocelot_stats_layout);
- 	ocelot->shared_queue_sz = 224 * 1024;
-+	ocelot->ops = ops;
- 
- 	ret = ocelot_regfields_init(ocelot, ocelot_regfields);
- 	if (ret)
diff --git a/target/linux/layerscape/patches-5.4/701-net-0255-net-mscc-ocelot-move-invariant-configs-out-of-adjust.patch b/target/linux/layerscape/patches-5.4/701-net-0255-net-mscc-ocelot-move-invariant-configs-out-of-adjust.patch
deleted file mode 100644
index f0f4aeae5d..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0255-net-mscc-ocelot-move-invariant-configs-out-of-adjust.patch
+++ /dev/null
@@ -1,154 +0,0 @@
-From 861a32edce13ccba86647507fefcfd4910972dd7 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Thu, 14 Nov 2019 17:03:22 +0200
-Subject: [PATCH] net: mscc: ocelot: move invariant configs out of adjust_link
-
-It doesn't make sense to rewrite all these registers every time the PHY
-library notifies us about a link state change.
-
-In a future patch we will customize the MTU for the CPU port, and since
-the MTU was previously configured from adjust_link, if we don't make
-this change, its value would have got overridden.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 85 +++++++++++++++++++-------------------
- 1 file changed, 43 insertions(+), 42 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -408,7 +408,7 @@ static void ocelot_adjust_link(struct oc
- 			       struct phy_device *phydev)
- {
- 	struct ocelot_port *ocelot_port = ocelot->ports[port];
--	int speed, atop_wm, mode = 0;
-+	int speed, mode = 0;
- 
- 	switch (phydev->speed) {
- 	case SPEED_10:
-@@ -440,32 +440,9 @@ static void ocelot_adjust_link(struct oc
- 	ocelot_port_writel(ocelot_port, DEV_MAC_MODE_CFG_FDX_ENA |
- 			   mode, DEV_MAC_MODE_CFG);
- 
--	/* Set MAC IFG Gaps
--	 * FDX: TX_IFG = 5, RX_IFG1 = RX_IFG2 = 0
--	 * !FDX: TX_IFG = 5, RX_IFG1 = RX_IFG2 = 5
--	 */
--	ocelot_port_writel(ocelot_port, DEV_MAC_IFG_CFG_TX_IFG(5),
--			   DEV_MAC_IFG_CFG);
--
--	/* Load seed (0) and set MAC HDX late collision  */
--	ocelot_port_writel(ocelot_port, DEV_MAC_HDX_CFG_LATE_COL_POS(67) |
--			   DEV_MAC_HDX_CFG_SEED_LOAD,
--			   DEV_MAC_HDX_CFG);
--	mdelay(1);
--	ocelot_port_writel(ocelot_port, DEV_MAC_HDX_CFG_LATE_COL_POS(67),
--			   DEV_MAC_HDX_CFG);
--
- 	if (ocelot->ops->pcs_init)
- 		ocelot->ops->pcs_init(ocelot, port);
- 
--	/* Set Max Length and maximum tags allowed */
--	ocelot_port_writel(ocelot_port, VLAN_ETH_FRAME_LEN,
--			   DEV_MAC_MAXLEN_CFG);
--	ocelot_port_writel(ocelot_port, DEV_MAC_TAGS_CFG_TAG_ID(ETH_P_8021AD) |
--			   DEV_MAC_TAGS_CFG_VLAN_AWR_ENA |
--			   DEV_MAC_TAGS_CFG_VLAN_LEN_AWR_ENA,
--			   DEV_MAC_TAGS_CFG);
--
- 	/* Enable MAC module */
- 	ocelot_port_writel(ocelot_port, DEV_MAC_ENA_CFG_RX_ENA |
- 			   DEV_MAC_ENA_CFG_TX_ENA, DEV_MAC_ENA_CFG);
-@@ -475,22 +452,10 @@ static void ocelot_adjust_link(struct oc
- 	ocelot_port_writel(ocelot_port, DEV_CLOCK_CFG_LINK_SPEED(speed),
- 			   DEV_CLOCK_CFG);
- 
--	/* Set SMAC of Pause frame (00:00:00:00:00:00) */
--	ocelot_port_writel(ocelot_port, 0, DEV_MAC_FC_MAC_HIGH_CFG);
--	ocelot_port_writel(ocelot_port, 0, DEV_MAC_FC_MAC_LOW_CFG);
--
- 	/* No PFC */
- 	ocelot_write_gix(ocelot, ANA_PFC_PFC_CFG_FC_LINK_SPEED(speed),
- 			 ANA_PFC_PFC_CFG, port);
- 
--	/* Set Pause WM hysteresis
--	 * 152 = 6 * VLAN_ETH_FRAME_LEN / OCELOT_BUFFER_CELL_SZ
--	 * 101 = 4 * VLAN_ETH_FRAME_LEN / OCELOT_BUFFER_CELL_SZ
--	 */
--	ocelot_write_rix(ocelot, SYS_PAUSE_CFG_PAUSE_ENA |
--			 SYS_PAUSE_CFG_PAUSE_STOP(101) |
--			 SYS_PAUSE_CFG_PAUSE_START(152), SYS_PAUSE_CFG, port);
--
- 	/* Core: Enable port for frame transfer */
- 	ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
- 			 QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
-@@ -505,12 +470,6 @@ static void ocelot_adjust_link(struct oc
- 			 SYS_MAC_FC_CFG_FC_LINK_SPEED(speed),
- 			 SYS_MAC_FC_CFG, port);
- 	ocelot_write_rix(ocelot, 0, ANA_POL_FLOWC, port);
--
--	/* Tail dropping watermark */
--	atop_wm = (ocelot->shared_queue_sz - 9 * VLAN_ETH_FRAME_LEN) / OCELOT_BUFFER_CELL_SZ;
--	ocelot_write_rix(ocelot, ocelot_wm_enc(9 * VLAN_ETH_FRAME_LEN),
--			 SYS_ATOP, port);
--	ocelot_write(ocelot, ocelot_wm_enc(atop_wm), SYS_ATOP_TOT_CFG);
- }
- 
- static void ocelot_port_adjust_link(struct net_device *dev)
-@@ -2140,11 +2099,53 @@ static int ocelot_init_timestamp(struct
- static void ocelot_init_port(struct ocelot *ocelot, int port)
- {
- 	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+	int atop_wm;
- 
- 	INIT_LIST_HEAD(&ocelot_port->skbs);
- 
- 	/* Basic L2 initialization */
- 
-+	/* Set MAC IFG Gaps
-+	 * FDX: TX_IFG = 5, RX_IFG1 = RX_IFG2 = 0
-+	 * !FDX: TX_IFG = 5, RX_IFG1 = RX_IFG2 = 5
-+	 */
-+	ocelot_port_writel(ocelot_port, DEV_MAC_IFG_CFG_TX_IFG(5),
-+			   DEV_MAC_IFG_CFG);
-+
-+	/* Load seed (0) and set MAC HDX late collision  */
-+	ocelot_port_writel(ocelot_port, DEV_MAC_HDX_CFG_LATE_COL_POS(67) |
-+			   DEV_MAC_HDX_CFG_SEED_LOAD,
-+			   DEV_MAC_HDX_CFG);
-+	mdelay(1);
-+	ocelot_port_writel(ocelot_port, DEV_MAC_HDX_CFG_LATE_COL_POS(67),
-+			   DEV_MAC_HDX_CFG);
-+
-+	/* Set Max Length and maximum tags allowed */
-+	ocelot_port_writel(ocelot_port, VLAN_ETH_FRAME_LEN,
-+			   DEV_MAC_MAXLEN_CFG);
-+	ocelot_port_writel(ocelot_port, DEV_MAC_TAGS_CFG_TAG_ID(ETH_P_8021AD) |
-+			   DEV_MAC_TAGS_CFG_VLAN_AWR_ENA |
-+			   DEV_MAC_TAGS_CFG_VLAN_LEN_AWR_ENA,
-+			   DEV_MAC_TAGS_CFG);
-+
-+	/* Set SMAC of Pause frame (00:00:00:00:00:00) */
-+	ocelot_port_writel(ocelot_port, 0, DEV_MAC_FC_MAC_HIGH_CFG);
-+	ocelot_port_writel(ocelot_port, 0, DEV_MAC_FC_MAC_LOW_CFG);
-+
-+	/* Set Pause WM hysteresis
-+	 * 152 = 6 * VLAN_ETH_FRAME_LEN / OCELOT_BUFFER_CELL_SZ
-+	 * 101 = 4 * VLAN_ETH_FRAME_LEN / OCELOT_BUFFER_CELL_SZ
-+	 */
-+	ocelot_write_rix(ocelot, SYS_PAUSE_CFG_PAUSE_ENA |
-+			 SYS_PAUSE_CFG_PAUSE_STOP(101) |
-+			 SYS_PAUSE_CFG_PAUSE_START(152), SYS_PAUSE_CFG, port);
-+
-+	/* Tail dropping watermark */
-+	atop_wm = (ocelot->shared_queue_sz - 9 * VLAN_ETH_FRAME_LEN) / OCELOT_BUFFER_CELL_SZ;
-+	ocelot_write_rix(ocelot, ocelot_wm_enc(9 * VLAN_ETH_FRAME_LEN),
-+			 SYS_ATOP, port);
-+	ocelot_write(ocelot, ocelot_wm_enc(atop_wm), SYS_ATOP_TOT_CFG);
-+
- 	/* Drop frames with multicast source address */
- 	ocelot_rmw_gix(ocelot, ANA_PORT_DROP_CFG_DROP_MC_SMAC_ENA,
- 		       ANA_PORT_DROP_CFG_DROP_MC_SMAC_ENA,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0256-net-mscc-ocelot-create-a-helper-for-changing-the-por.patch b/target/linux/layerscape/patches-5.4/701-net-0256-net-mscc-ocelot-create-a-helper-for-changing-the-por.patch
deleted file mode 100644
index 13fe784f24..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0256-net-mscc-ocelot-create-a-helper-for-changing-the-por.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From e870793b277eeaf3c455971d9610f039fd9ab160 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Thu, 14 Nov 2019 17:03:23 +0200
-Subject: [PATCH] net: mscc: ocelot: create a helper for changing the port MTU
-
-Since in an NPI/DSA setup, not all ports will have the same MTU, we need
-to make sure the watermarks for pause frames and/or tail dropping logic
-that existed in the driver is still coherent for the new MTU values.
-
-We need to do this because the NPI (aka external CPU) port needs an
-increased MTU for the DSA tag. This will be done in a future patch.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 40 ++++++++++++++++++++++----------------
- 1 file changed, 23 insertions(+), 17 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -2096,11 +2096,32 @@ static int ocelot_init_timestamp(struct
- 	return 0;
- }
- 
--static void ocelot_init_port(struct ocelot *ocelot, int port)
-+static void ocelot_port_set_mtu(struct ocelot *ocelot, int port, size_t mtu)
- {
- 	struct ocelot_port *ocelot_port = ocelot->ports[port];
- 	int atop_wm;
- 
-+	ocelot_port_writel(ocelot_port, mtu, DEV_MAC_MAXLEN_CFG);
-+
-+	/* Set Pause WM hysteresis
-+	 * 152 = 6 * mtu / OCELOT_BUFFER_CELL_SZ
-+	 * 101 = 4 * mtu / OCELOT_BUFFER_CELL_SZ
-+	 */
-+	ocelot_write_rix(ocelot, SYS_PAUSE_CFG_PAUSE_ENA |
-+			 SYS_PAUSE_CFG_PAUSE_STOP(101) |
-+			 SYS_PAUSE_CFG_PAUSE_START(152), SYS_PAUSE_CFG, port);
-+
-+	/* Tail dropping watermark */
-+	atop_wm = (ocelot->shared_queue_sz - 9 * mtu) / OCELOT_BUFFER_CELL_SZ;
-+	ocelot_write_rix(ocelot, ocelot_wm_enc(9 * mtu),
-+			 SYS_ATOP, port);
-+	ocelot_write(ocelot, ocelot_wm_enc(atop_wm), SYS_ATOP_TOT_CFG);
-+}
-+
-+static void ocelot_init_port(struct ocelot *ocelot, int port)
-+{
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+
- 	INIT_LIST_HEAD(&ocelot_port->skbs);
- 
- 	/* Basic L2 initialization */
-@@ -2121,8 +2142,7 @@ static void ocelot_init_port(struct ocel
- 			   DEV_MAC_HDX_CFG);
- 
- 	/* Set Max Length and maximum tags allowed */
--	ocelot_port_writel(ocelot_port, VLAN_ETH_FRAME_LEN,
--			   DEV_MAC_MAXLEN_CFG);
-+	ocelot_port_set_mtu(ocelot, port, VLAN_ETH_FRAME_LEN);
- 	ocelot_port_writel(ocelot_port, DEV_MAC_TAGS_CFG_TAG_ID(ETH_P_8021AD) |
- 			   DEV_MAC_TAGS_CFG_VLAN_AWR_ENA |
- 			   DEV_MAC_TAGS_CFG_VLAN_LEN_AWR_ENA,
-@@ -2132,20 +2152,6 @@ static void ocelot_init_port(struct ocel
- 	ocelot_port_writel(ocelot_port, 0, DEV_MAC_FC_MAC_HIGH_CFG);
- 	ocelot_port_writel(ocelot_port, 0, DEV_MAC_FC_MAC_LOW_CFG);
- 
--	/* Set Pause WM hysteresis
--	 * 152 = 6 * VLAN_ETH_FRAME_LEN / OCELOT_BUFFER_CELL_SZ
--	 * 101 = 4 * VLAN_ETH_FRAME_LEN / OCELOT_BUFFER_CELL_SZ
--	 */
--	ocelot_write_rix(ocelot, SYS_PAUSE_CFG_PAUSE_ENA |
--			 SYS_PAUSE_CFG_PAUSE_STOP(101) |
--			 SYS_PAUSE_CFG_PAUSE_START(152), SYS_PAUSE_CFG, port);
--
--	/* Tail dropping watermark */
--	atop_wm = (ocelot->shared_queue_sz - 9 * VLAN_ETH_FRAME_LEN) / OCELOT_BUFFER_CELL_SZ;
--	ocelot_write_rix(ocelot, ocelot_wm_enc(9 * VLAN_ETH_FRAME_LEN),
--			 SYS_ATOP, port);
--	ocelot_write(ocelot, ocelot_wm_enc(atop_wm), SYS_ATOP_TOT_CFG);
--
- 	/* Drop frames with multicast source address */
- 	ocelot_rmw_gix(ocelot, ANA_PORT_DROP_CFG_DROP_MC_SMAC_ENA,
- 		       ANA_PORT_DROP_CFG_DROP_MC_SMAC_ENA,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0257-net-mscc-ocelot-export-a-constant-for-the-tag-length.patch b/target/linux/layerscape/patches-5.4/701-net-0257-net-mscc-ocelot-export-a-constant-for-the-tag-length.patch
deleted file mode 100644
index 9a45bad301..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0257-net-mscc-ocelot-export-a-constant-for-the-tag-length.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From f53826ed84b6ce7c588949263cc9dedf3c577aa6 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Thu, 14 Nov 2019 17:03:24 +0200
-Subject: [PATCH] net: mscc: ocelot: export a constant for the tag length in
- bytes
-
-This constant will be used in a future patch to increase the MTU on NPI
-ports, and will also be used in the tagger driver for Felix.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c       | 4 ++--
- drivers/net/ethernet/mscc/ocelot.h       | 4 ++--
- drivers/net/ethernet/mscc/ocelot_board.c | 2 +-
- 3 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -576,11 +576,11 @@ static int ocelot_port_xmit(struct sk_bu
- 	struct skb_shared_info *shinfo = skb_shinfo(skb);
- 	struct ocelot_port *ocelot_port = &priv->port;
- 	struct ocelot *ocelot = ocelot_port->ocelot;
-+	u32 val, ifh[OCELOT_TAG_LEN / 4];
- 	struct frame_info info = {};
- 	u8 grp = 0; /* Send everything on CPU group 0 */
- 	unsigned int i, count, last;
- 	int port = priv->chip_port;
--	u32 val, ifh[IFH_LEN];
- 
- 	val = ocelot_read(ocelot, QS_INJ_STATUS);
- 	if (!(val & QS_INJ_STATUS_FIFO_RDY(BIT(grp))) ||
-@@ -603,7 +603,7 @@ static int ocelot_port_xmit(struct sk_bu
- 
- 	ocelot_gen_ifh(ifh, &info);
- 
--	for (i = 0; i < IFH_LEN; i++)
-+	for (i = 0; i < OCELOT_TAG_LEN / 4; i++)
- 		ocelot_write_rix(ocelot, (__force u32)cpu_to_be32(ifh[i]),
- 				 QS_INJ_WR, grp);
- 
---- a/drivers/net/ethernet/mscc/ocelot.h
-+++ b/drivers/net/ethernet/mscc/ocelot.h
-@@ -43,8 +43,6 @@
- 
- #define OCELOT_PTP_QUEUE_SZ	128
- 
--#define IFH_LEN 4
--
- struct frame_info {
- 	u32 len;
- 	u16 port;
-@@ -66,6 +64,8 @@ struct frame_info {
- #define IFH_REW_OP_TWO_STEP_PTP		0x3
- #define IFH_REW_OP_ORIGIN_PTP		0x5
- 
-+#define OCELOT_TAG_LEN			16
-+
- #define OCELOT_SPEED_2500 0
- #define OCELOT_SPEED_1000 1
- #define OCELOT_SPEED_100  2
---- a/drivers/net/ethernet/mscc/ocelot_board.c
-+++ b/drivers/net/ethernet/mscc/ocelot_board.c
-@@ -105,7 +105,7 @@ static irqreturn_t ocelot_xtr_irq_handle
- 		int sz, len, buf_len;
- 		struct sk_buff *skb;
- 
--		for (i = 0; i < IFH_LEN; i++) {
-+		for (i = 0; i < OCELOT_TAG_LEN / 4; i++) {
- 			err = ocelot_rx_frame_word(ocelot, grp, true, &ifh[i]);
- 			if (err != 4)
- 				break;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0258-net-mscc-ocelot-adjust-MTU-on-the-CPU-port-in-NPI-mo.patch b/target/linux/layerscape/patches-5.4/701-net-0258-net-mscc-ocelot-adjust-MTU-on-the-CPU-port-in-NPI-mo.patch
deleted file mode 100644
index 667be87db0..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0258-net-mscc-ocelot-adjust-MTU-on-the-CPU-port-in-NPI-mo.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From b2f7c18c351737c2a053c39c09ef50870fd78c06 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Thu, 14 Nov 2019 17:03:25 +0200
-Subject: [PATCH] net: mscc: ocelot: adjust MTU on the CPU port in NPI mode
-
-When using the NPI port, the DSA tag is passed through Ethernet, so the
-switch's MAC needs to accept it as it comes from the DSA master. Increase
-the MTU on the external CPU port to account for the length of the
-injection header.
-
-Without this patch, MTU-sized frames are dropped by the switch's CPU
-port on xmit, which is especially obvious in TCP sessions.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 9 +++++++++
- drivers/net/ethernet/mscc/ocelot.h | 2 ++
- 2 files changed, 11 insertions(+)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -2229,9 +2229,18 @@ void ocelot_set_cpu_port(struct ocelot *
- 	 * Only one port can be an NPI at the same time.
- 	 */
- 	if (cpu < ocelot->num_phys_ports) {
-+		int mtu = VLAN_ETH_FRAME_LEN + OCELOT_TAG_LEN;
-+
- 		ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M |
- 			     QSYS_EXT_CPU_CFG_EXT_CPU_PORT(cpu),
- 			     QSYS_EXT_CPU_CFG);
-+
-+		if (injection == OCELOT_TAG_PREFIX_SHORT)
-+			mtu += OCELOT_SHORT_PREFIX_LEN;
-+		else if (injection == OCELOT_TAG_PREFIX_LONG)
-+			mtu += OCELOT_LONG_PREFIX_LEN;
-+
-+		ocelot_port_set_mtu(ocelot, cpu, mtu);
- 	}
- 
- 	/* CPU port Injection/Extraction configuration */
---- a/drivers/net/ethernet/mscc/ocelot.h
-+++ b/drivers/net/ethernet/mscc/ocelot.h
-@@ -65,6 +65,8 @@ struct frame_info {
- #define IFH_REW_OP_ORIGIN_PTP		0x5
- 
- #define OCELOT_TAG_LEN			16
-+#define OCELOT_SHORT_PREFIX_LEN		4
-+#define OCELOT_LONG_PREFIX_LEN		16
- 
- #define OCELOT_SPEED_2500 0
- #define OCELOT_SPEED_1000 1
diff --git a/target/linux/layerscape/patches-5.4/701-net-0259-net-mscc-ocelot-separate-the-implementation-of-switc.patch b/target/linux/layerscape/patches-5.4/701-net-0259-net-mscc-ocelot-separate-the-implementation-of-switc.patch
deleted file mode 100644
index 3a8e9d6b11..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0259-net-mscc-ocelot-separate-the-implementation-of-switc.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From c96a1cff5d03a56f380ce761aec9d11fcf61c7f1 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Thu, 14 Nov 2019 17:03:26 +0200
-Subject: [PATCH] net: mscc: ocelot: separate the implementation of switch
- reset
-
-The Felix switch has a different reset procedure, so a function pointer
-needs to be created and added to the ocelot_ops structure.
-
-The reset procedure has been moved into ocelot_init.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c       |  8 +++++++
- drivers/net/ethernet/mscc/ocelot.h       |  1 +
- drivers/net/ethernet/mscc/ocelot_board.c | 37 +++++++++++++++++++++-----------
- 3 files changed, 33 insertions(+), 13 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -2268,6 +2268,14 @@ int ocelot_init(struct ocelot *ocelot)
- 	int i, ret;
- 	u32 port;
- 
-+	if (ocelot->ops->reset) {
-+		ret = ocelot->ops->reset(ocelot);
-+		if (ret) {
-+			dev_err(ocelot->dev, "Switch reset failed\n");
-+			return ret;
-+		}
-+	}
-+
- 	ocelot->lags = devm_kcalloc(ocelot->dev, ocelot->num_phys_ports,
- 				    sizeof(u32), GFP_KERNEL);
- 	if (!ocelot->lags)
---- a/drivers/net/ethernet/mscc/ocelot.h
-+++ b/drivers/net/ethernet/mscc/ocelot.h
-@@ -446,6 +446,7 @@ struct ocelot_stat_layout {
- 
- struct ocelot_ops {
- 	void (*pcs_init)(struct ocelot *ocelot, int port);
-+	int (*reset)(struct ocelot *ocelot);
- };
- 
- struct ocelot {
---- a/drivers/net/ethernet/mscc/ocelot_board.c
-+++ b/drivers/net/ethernet/mscc/ocelot_board.c
-@@ -285,8 +285,32 @@ static void ocelot_port_pcs_init(struct
- 	ocelot_port_writel(ocelot_port, 0, PCS1G_LB_CFG);
- }
- 
-+static int ocelot_reset(struct ocelot *ocelot)
-+{
-+	int retries = 100;
-+	u32 val;
-+
-+	regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], 1);
-+	regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
-+
-+	do {
-+		msleep(1);
-+		regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT],
-+				  &val);
-+	} while (val && --retries);
-+
-+	if (!retries)
-+		return -ETIMEDOUT;
-+
-+	regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
-+	regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
-+
-+	return 0;
-+}
-+
- static const struct ocelot_ops ocelot_ops = {
- 	.pcs_init		= ocelot_port_pcs_init,
-+	.reset			= ocelot_reset,
- };
- 
- static int mscc_ocelot_probe(struct platform_device *pdev)
-@@ -297,7 +321,6 @@ static int mscc_ocelot_probe(struct plat
- 	struct ocelot *ocelot;
- 	struct regmap *hsio;
- 	unsigned int i;
--	u32 val;
- 
- 	struct {
- 		enum ocelot_target id;
-@@ -377,18 +400,6 @@ static int mscc_ocelot_probe(struct plat
- 		ocelot->ptp = 1;
- 	}
- 
--	regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], 1);
--	regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
--
--	do {
--		msleep(1);
--		regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT],
--				  &val);
--	} while (val);
--
--	regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
--	regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
--
- 	ocelot->num_cpu_ports = 1; /* 1 port on the switch, two groups */
- 
- 	ports = of_get_child_by_name(np, "ethernet-ports");
diff --git a/target/linux/layerscape/patches-5.4/701-net-0260-net-mscc-ocelot-publish-structure-definitions-to-inc.patch b/target/linux/layerscape/patches-5.4/701-net-0260-net-mscc-ocelot-publish-structure-definitions-to-inc.patch
deleted file mode 100644
index 8529e9825c..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0260-net-mscc-ocelot-publish-structure-definitions-to-inc.patch
+++ /dev/null
@@ -1,1414 +0,0 @@
-From 417b5a156ca8ab4c986c9deacf58309ce4e09410 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Thu, 14 Nov 2019 17:03:27 +0200
-Subject: [PATCH] net: mscc: ocelot: publish structure definitions to
- include/soc/mscc/ocelot.h
-
-We will be registering another switch driver based on ocelot, which
-lives under drivers/net/dsa.
-
-Make sure the Felix DSA front-end has the necessary abstractions to
-implement a new Ocelot driver instantiation. This includes the function
-prototypes for implementing DSA callbacks.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c |  78 +++---
- drivers/net/ethernet/mscc/ocelot.h | 482 +--------------------------------
- include/soc/mscc/ocelot.h          | 539 +++++++++++++++++++++++++++++++++++++
- 3 files changed, 588 insertions(+), 511 deletions(-)
- create mode 100644 include/soc/mscc/ocelot.h
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -21,7 +21,6 @@
- #include <net/netevent.h>
- #include <net/rtnetlink.h>
- #include <net/switchdev.h>
--#include <net/dsa.h>
- 
- #include "ocelot.h"
- #include "ocelot_ace.h"
-@@ -184,8 +183,8 @@ static void ocelot_vlan_mode(struct ocel
- 	ocelot_write(ocelot, val, ANA_VLANMASK);
- }
- 
--static void ocelot_port_vlan_filtering(struct ocelot *ocelot, int port,
--				       bool vlan_aware)
-+void ocelot_port_vlan_filtering(struct ocelot *ocelot, int port,
-+				bool vlan_aware)
- {
- 	struct ocelot_port *ocelot_port = ocelot->ports[port];
- 	u32 val;
-@@ -230,6 +229,7 @@ static void ocelot_port_vlan_filtering(s
- 		       REW_TAG_CFG_TAG_CFG_M,
- 		       REW_TAG_CFG, port);
- }
-+EXPORT_SYMBOL(ocelot_port_vlan_filtering);
- 
- static int ocelot_port_set_native_vlan(struct ocelot *ocelot, int port,
- 				       u16 vid)
-@@ -267,8 +267,8 @@ static void ocelot_port_set_pvid(struct
- 	ocelot_port->pvid = pvid;
- }
- 
--static int ocelot_vlan_add(struct ocelot *ocelot, int port, u16 vid, bool pvid,
--			   bool untagged)
-+int ocelot_vlan_add(struct ocelot *ocelot, int port, u16 vid, bool pvid,
-+		    bool untagged)
- {
- 	int ret;
- 
-@@ -291,6 +291,7 @@ static int ocelot_vlan_add(struct ocelot
- 
- 	return 0;
- }
-+EXPORT_SYMBOL(ocelot_vlan_add);
- 
- static int ocelot_vlan_vid_add(struct net_device *dev, u16 vid, bool pvid,
- 			       bool untagged)
-@@ -312,7 +313,7 @@ static int ocelot_vlan_vid_add(struct ne
- 	return 0;
- }
- 
--static int ocelot_vlan_del(struct ocelot *ocelot, int port, u16 vid)
-+int ocelot_vlan_del(struct ocelot *ocelot, int port, u16 vid)
- {
- 	struct ocelot_port *ocelot_port = ocelot->ports[port];
- 	int ret;
-@@ -333,6 +334,7 @@ static int ocelot_vlan_del(struct ocelot
- 
- 	return 0;
- }
-+EXPORT_SYMBOL(ocelot_vlan_del);
- 
- static int ocelot_vlan_vid_del(struct net_device *dev, u16 vid)
- {
-@@ -404,8 +406,8 @@ static u16 ocelot_wm_enc(u16 value)
- 	return value;
- }
- 
--static void ocelot_adjust_link(struct ocelot *ocelot, int port,
--			       struct phy_device *phydev)
-+void ocelot_adjust_link(struct ocelot *ocelot, int port,
-+			struct phy_device *phydev)
- {
- 	struct ocelot_port *ocelot_port = ocelot->ports[port];
- 	int speed, mode = 0;
-@@ -471,6 +473,7 @@ static void ocelot_adjust_link(struct oc
- 			 SYS_MAC_FC_CFG, port);
- 	ocelot_write_rix(ocelot, 0, ANA_POL_FLOWC, port);
- }
-+EXPORT_SYMBOL(ocelot_adjust_link);
- 
- static void ocelot_port_adjust_link(struct net_device *dev)
- {
-@@ -481,8 +484,8 @@ static void ocelot_port_adjust_link(stru
- 	ocelot_adjust_link(ocelot, port, dev->phydev);
- }
- 
--static void ocelot_port_enable(struct ocelot *ocelot, int port,
--			       struct phy_device *phy)
-+void ocelot_port_enable(struct ocelot *ocelot, int port,
-+			struct phy_device *phy)
- {
- 	/* Enable receiving frames on the port, and activate auto-learning of
- 	 * MAC addresses.
-@@ -492,6 +495,7 @@ static void ocelot_port_enable(struct oc
- 			 ANA_PORT_PORT_CFG_PORTID_VAL(port),
- 			 ANA_PORT_PORT_CFG, port);
- }
-+EXPORT_SYMBOL(ocelot_port_enable);
- 
- static int ocelot_port_open(struct net_device *dev)
- {
-@@ -526,7 +530,7 @@ static int ocelot_port_open(struct net_d
- 	return 0;
- }
- 
--static void ocelot_port_disable(struct ocelot *ocelot, int port)
-+void ocelot_port_disable(struct ocelot *ocelot, int port)
- {
- 	struct ocelot_port *ocelot_port = ocelot->ports[port];
- 
-@@ -534,6 +538,7 @@ static void ocelot_port_disable(struct o
- 	ocelot_rmw_rix(ocelot, 0, QSYS_SWITCH_PORT_MODE_PORT_ENA,
- 		       QSYS_SWITCH_PORT_MODE, port);
- }
-+EXPORT_SYMBOL(ocelot_port_disable);
- 
- static int ocelot_port_stop(struct net_device *dev)
- {
-@@ -790,9 +795,8 @@ static void ocelot_get_stats64(struct ne
- 	stats->collisions = ocelot_read(ocelot, SYS_COUNT_TX_COLLISION);
- }
- 
--static int ocelot_fdb_add(struct ocelot *ocelot, int port,
--			  const unsigned char *addr, u16 vid,
--			  bool vlan_aware)
-+int ocelot_fdb_add(struct ocelot *ocelot, int port,
-+		   const unsigned char *addr, u16 vid, bool vlan_aware)
- {
- 	struct ocelot_port *ocelot_port = ocelot->ports[port];
- 
-@@ -812,6 +816,7 @@ static int ocelot_fdb_add(struct ocelot
- 
- 	return ocelot_mact_learn(ocelot, port, addr, vid, ENTRYTYPE_LOCKED);
- }
-+EXPORT_SYMBOL(ocelot_fdb_add);
- 
- static int ocelot_port_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
- 			       struct net_device *dev,
-@@ -826,11 +831,12 @@ static int ocelot_port_fdb_add(struct nd
- 	return ocelot_fdb_add(ocelot, port, addr, vid, priv->vlan_aware);
- }
- 
--static int ocelot_fdb_del(struct ocelot *ocelot, int port,
--			  const unsigned char *addr, u16 vid)
-+int ocelot_fdb_del(struct ocelot *ocelot, int port,
-+		   const unsigned char *addr, u16 vid)
- {
- 	return ocelot_mact_forget(ocelot, addr, vid);
- }
-+EXPORT_SYMBOL(ocelot_fdb_del);
- 
- static int ocelot_port_fdb_del(struct ndmsg *ndm, struct nlattr *tb[],
- 			       struct net_device *dev,
-@@ -940,8 +946,8 @@ static int ocelot_mact_read(struct ocelo
- 	return 0;
- }
- 
--static int ocelot_fdb_dump(struct ocelot *ocelot, int port,
--			   dsa_fdb_dump_cb_t *cb, void *data)
-+int ocelot_fdb_dump(struct ocelot *ocelot, int port,
-+		    dsa_fdb_dump_cb_t *cb, void *data)
- {
- 	int i, j;
- 
-@@ -973,6 +979,7 @@ static int ocelot_fdb_dump(struct ocelot
- 
- 	return 0;
- }
-+EXPORT_SYMBOL(ocelot_fdb_dump);
- 
- static int ocelot_port_fdb_dump(struct sk_buff *skb,
- 				struct netlink_callback *cb,
-@@ -1147,8 +1154,7 @@ static const struct net_device_ops ocelo
- 	.ndo_do_ioctl			= ocelot_ioctl,
- };
- 
--static void ocelot_get_strings(struct ocelot *ocelot, int port, u32 sset,
--			       u8 *data)
-+void ocelot_get_strings(struct ocelot *ocelot, int port, u32 sset, u8 *data)
- {
- 	int i;
- 
-@@ -1159,6 +1165,7 @@ static void ocelot_get_strings(struct oc
- 		memcpy(data + i * ETH_GSTRING_LEN, ocelot->stats_layout[i].name,
- 		       ETH_GSTRING_LEN);
- }
-+EXPORT_SYMBOL(ocelot_get_strings);
- 
- static void ocelot_port_get_strings(struct net_device *netdev, u32 sset,
- 				    u8 *data)
-@@ -1210,7 +1217,7 @@ static void ocelot_check_stats_work(stru
- 			   OCELOT_STATS_CHECK_DELAY);
- }
- 
--static void ocelot_get_ethtool_stats(struct ocelot *ocelot, int port, u64 *data)
-+void ocelot_get_ethtool_stats(struct ocelot *ocelot, int port, u64 *data)
- {
- 	int i;
- 
-@@ -1221,6 +1228,7 @@ static void ocelot_get_ethtool_stats(str
- 	for (i = 0; i < ocelot->num_stats; i++)
- 		*data++ = ocelot->stats[port * ocelot->num_stats + i];
- }
-+EXPORT_SYMBOL(ocelot_get_ethtool_stats);
- 
- static void ocelot_port_get_ethtool_stats(struct net_device *dev,
- 					  struct ethtool_stats *stats,
-@@ -1233,13 +1241,14 @@ static void ocelot_port_get_ethtool_stat
- 	ocelot_get_ethtool_stats(ocelot, port, data);
- }
- 
--static int ocelot_get_sset_count(struct ocelot *ocelot, int port, int sset)
-+int ocelot_get_sset_count(struct ocelot *ocelot, int port, int sset)
- {
- 	if (sset != ETH_SS_STATS)
- 		return -EOPNOTSUPP;
- 
- 	return ocelot->num_stats;
- }
-+EXPORT_SYMBOL(ocelot_get_sset_count);
- 
- static int ocelot_port_get_sset_count(struct net_device *dev, int sset)
- {
-@@ -1250,8 +1259,8 @@ static int ocelot_port_get_sset_count(st
- 	return ocelot_get_sset_count(ocelot, port, sset);
- }
- 
--static int ocelot_get_ts_info(struct ocelot *ocelot, int port,
--			      struct ethtool_ts_info *info)
-+int ocelot_get_ts_info(struct ocelot *ocelot, int port,
-+		       struct ethtool_ts_info *info)
- {
- 	info->phc_index = ocelot->ptp_clock ?
- 			  ptp_clock_index(ocelot->ptp_clock) : -1;
-@@ -1270,6 +1279,7 @@ static int ocelot_get_ts_info(struct oce
- 
- 	return 0;
- }
-+EXPORT_SYMBOL(ocelot_get_ts_info);
- 
- static int ocelot_port_get_ts_info(struct net_device *dev,
- 				   struct ethtool_ts_info *info)
-@@ -1293,8 +1303,7 @@ static const struct ethtool_ops ocelot_e
- 	.get_ts_info		= ocelot_port_get_ts_info,
- };
- 
--static void ocelot_bridge_stp_state_set(struct ocelot *ocelot, int port,
--					u8 state)
-+void ocelot_bridge_stp_state_set(struct ocelot *ocelot, int port, u8 state)
- {
- 	u32 port_cfg;
- 	int p, i;
-@@ -1355,6 +1364,7 @@ static void ocelot_bridge_stp_state_set(
- 		}
- 	}
- }
-+EXPORT_SYMBOL(ocelot_bridge_stp_state_set);
- 
- static void ocelot_port_attr_stp_state_set(struct ocelot *ocelot, int port,
- 					   struct switchdev_trans *trans,
-@@ -1366,11 +1376,12 @@ static void ocelot_port_attr_stp_state_s
- 	ocelot_bridge_stp_state_set(ocelot, port, state);
- }
- 
--static void ocelot_set_ageing_time(struct ocelot *ocelot, unsigned int msecs)
-+void ocelot_set_ageing_time(struct ocelot *ocelot, unsigned int msecs)
- {
- 	ocelot_write(ocelot, ANA_AUTOAGE_AGE_PERIOD(msecs / 2),
- 		     ANA_AUTOAGE);
- }
-+EXPORT_SYMBOL(ocelot_set_ageing_time);
- 
- static void ocelot_port_attr_ageing_set(struct ocelot *ocelot, int port,
- 					unsigned long ageing_clock_t)
-@@ -1601,8 +1612,8 @@ static int ocelot_port_obj_del(struct ne
- 	return ret;
- }
- 
--static int ocelot_port_bridge_join(struct ocelot *ocelot, int port,
--				   struct net_device *bridge)
-+int ocelot_port_bridge_join(struct ocelot *ocelot, int port,
-+			    struct net_device *bridge)
- {
- 	if (!ocelot->bridge_mask) {
- 		ocelot->hw_bridge_dev = bridge;
-@@ -1617,9 +1628,10 @@ static int ocelot_port_bridge_join(struc
- 
- 	return 0;
- }
-+EXPORT_SYMBOL(ocelot_port_bridge_join);
- 
--static int ocelot_port_bridge_leave(struct ocelot *ocelot, int port,
--				    struct net_device *bridge)
-+int ocelot_port_bridge_leave(struct ocelot *ocelot, int port,
-+			     struct net_device *bridge)
- {
- 	ocelot->bridge_mask &= ~BIT(port);
- 
-@@ -1630,6 +1642,7 @@ static int ocelot_port_bridge_leave(stru
- 	ocelot_port_set_pvid(ocelot, port, 0);
- 	return ocelot_port_set_native_vlan(ocelot, port, 0);
- }
-+EXPORT_SYMBOL(ocelot_port_bridge_leave);
- 
- static void ocelot_set_aggr_pgids(struct ocelot *ocelot)
- {
-@@ -2118,7 +2131,7 @@ static void ocelot_port_set_mtu(struct o
- 	ocelot_write(ocelot, ocelot_wm_enc(atop_wm), SYS_ATOP_TOT_CFG);
- }
- 
--static void ocelot_init_port(struct ocelot *ocelot, int port)
-+void ocelot_init_port(struct ocelot *ocelot, int port)
- {
- 	struct ocelot_port *ocelot_port = ocelot->ports[port];
- 
-@@ -2165,6 +2178,7 @@ static void ocelot_init_port(struct ocel
- 	/* Enable vcap lookups */
- 	ocelot_vcap_enable(ocelot, port);
- }
-+EXPORT_SYMBOL(ocelot_init_port);
- 
- int ocelot_probe_port(struct ocelot *ocelot, u8 port,
- 		      void __iomem *regs,
---- a/drivers/net/ethernet/mscc/ocelot.h
-+++ b/drivers/net/ethernet/mscc/ocelot.h
-@@ -18,6 +18,7 @@
- #include <linux/ptp_clock_kernel.h>
- #include <linux/regmap.h>
- 
-+#include <soc/mscc/ocelot.h>
- #include "ocelot_ana.h"
- #include "ocelot_dev.h"
- #include "ocelot_qsys.h"
-@@ -52,376 +53,6 @@ struct frame_info {
- 	u32 timestamp;	/* rew_val */
- };
- 
--#define IFH_INJ_BYPASS	BIT(31)
--#define IFH_INJ_POP_CNT_DISABLE (3 << 28)
--
--#define IFH_TAG_TYPE_C 0
--#define IFH_TAG_TYPE_S 1
--
--#define IFH_REW_OP_NOOP			0x0
--#define IFH_REW_OP_DSCP			0x1
--#define IFH_REW_OP_ONE_STEP_PTP		0x2
--#define IFH_REW_OP_TWO_STEP_PTP		0x3
--#define IFH_REW_OP_ORIGIN_PTP		0x5
--
--#define OCELOT_TAG_LEN			16
--#define OCELOT_SHORT_PREFIX_LEN		4
--#define OCELOT_LONG_PREFIX_LEN		16
--
--#define OCELOT_SPEED_2500 0
--#define OCELOT_SPEED_1000 1
--#define OCELOT_SPEED_100  2
--#define OCELOT_SPEED_10   3
--
--#define TARGET_OFFSET 24
--#define REG_MASK GENMASK(TARGET_OFFSET - 1, 0)
--#define REG(reg, offset) [reg & REG_MASK] = offset
--
--enum ocelot_target {
--	ANA = 1,
--	QS,
--	QSYS,
--	REW,
--	SYS,
--	S2,
--	HSIO,
--	PTP,
--	TARGET_MAX,
--};
--
--enum ocelot_reg {
--	ANA_ADVLEARN = ANA << TARGET_OFFSET,
--	ANA_VLANMASK,
--	ANA_PORT_B_DOMAIN,
--	ANA_ANAGEFIL,
--	ANA_ANEVENTS,
--	ANA_STORMLIMIT_BURST,
--	ANA_STORMLIMIT_CFG,
--	ANA_ISOLATED_PORTS,
--	ANA_COMMUNITY_PORTS,
--	ANA_AUTOAGE,
--	ANA_MACTOPTIONS,
--	ANA_LEARNDISC,
--	ANA_AGENCTRL,
--	ANA_MIRRORPORTS,
--	ANA_EMIRRORPORTS,
--	ANA_FLOODING,
--	ANA_FLOODING_IPMC,
--	ANA_SFLOW_CFG,
--	ANA_PORT_MODE,
--	ANA_CUT_THRU_CFG,
--	ANA_PGID_PGID,
--	ANA_TABLES_ANMOVED,
--	ANA_TABLES_MACHDATA,
--	ANA_TABLES_MACLDATA,
--	ANA_TABLES_STREAMDATA,
--	ANA_TABLES_MACACCESS,
--	ANA_TABLES_MACTINDX,
--	ANA_TABLES_VLANACCESS,
--	ANA_TABLES_VLANTIDX,
--	ANA_TABLES_ISDXACCESS,
--	ANA_TABLES_ISDXTIDX,
--	ANA_TABLES_ENTRYLIM,
--	ANA_TABLES_PTP_ID_HIGH,
--	ANA_TABLES_PTP_ID_LOW,
--	ANA_TABLES_STREAMACCESS,
--	ANA_TABLES_STREAMTIDX,
--	ANA_TABLES_SEQ_HISTORY,
--	ANA_TABLES_SEQ_MASK,
--	ANA_TABLES_SFID_MASK,
--	ANA_TABLES_SFIDACCESS,
--	ANA_TABLES_SFIDTIDX,
--	ANA_MSTI_STATE,
--	ANA_OAM_UPM_LM_CNT,
--	ANA_SG_ACCESS_CTRL,
--	ANA_SG_CONFIG_REG_1,
--	ANA_SG_CONFIG_REG_2,
--	ANA_SG_CONFIG_REG_3,
--	ANA_SG_CONFIG_REG_4,
--	ANA_SG_CONFIG_REG_5,
--	ANA_SG_GCL_GS_CONFIG,
--	ANA_SG_GCL_TI_CONFIG,
--	ANA_SG_STATUS_REG_1,
--	ANA_SG_STATUS_REG_2,
--	ANA_SG_STATUS_REG_3,
--	ANA_PORT_VLAN_CFG,
--	ANA_PORT_DROP_CFG,
--	ANA_PORT_QOS_CFG,
--	ANA_PORT_VCAP_CFG,
--	ANA_PORT_VCAP_S1_KEY_CFG,
--	ANA_PORT_VCAP_S2_CFG,
--	ANA_PORT_PCP_DEI_MAP,
--	ANA_PORT_CPU_FWD_CFG,
--	ANA_PORT_CPU_FWD_BPDU_CFG,
--	ANA_PORT_CPU_FWD_GARP_CFG,
--	ANA_PORT_CPU_FWD_CCM_CFG,
--	ANA_PORT_PORT_CFG,
--	ANA_PORT_POL_CFG,
--	ANA_PORT_PTP_CFG,
--	ANA_PORT_PTP_DLY1_CFG,
--	ANA_PORT_PTP_DLY2_CFG,
--	ANA_PORT_SFID_CFG,
--	ANA_PFC_PFC_CFG,
--	ANA_PFC_PFC_TIMER,
--	ANA_IPT_OAM_MEP_CFG,
--	ANA_IPT_IPT,
--	ANA_PPT_PPT,
--	ANA_FID_MAP_FID_MAP,
--	ANA_AGGR_CFG,
--	ANA_CPUQ_CFG,
--	ANA_CPUQ_CFG2,
--	ANA_CPUQ_8021_CFG,
--	ANA_DSCP_CFG,
--	ANA_DSCP_REWR_CFG,
--	ANA_VCAP_RNG_TYPE_CFG,
--	ANA_VCAP_RNG_VAL_CFG,
--	ANA_VRAP_CFG,
--	ANA_VRAP_HDR_DATA,
--	ANA_VRAP_HDR_MASK,
--	ANA_DISCARD_CFG,
--	ANA_FID_CFG,
--	ANA_POL_PIR_CFG,
--	ANA_POL_CIR_CFG,
--	ANA_POL_MODE_CFG,
--	ANA_POL_PIR_STATE,
--	ANA_POL_CIR_STATE,
--	ANA_POL_STATE,
--	ANA_POL_FLOWC,
--	ANA_POL_HYST,
--	ANA_POL_MISC_CFG,
--	QS_XTR_GRP_CFG = QS << TARGET_OFFSET,
--	QS_XTR_RD,
--	QS_XTR_FRM_PRUNING,
--	QS_XTR_FLUSH,
--	QS_XTR_DATA_PRESENT,
--	QS_XTR_CFG,
--	QS_INJ_GRP_CFG,
--	QS_INJ_WR,
--	QS_INJ_CTRL,
--	QS_INJ_STATUS,
--	QS_INJ_ERR,
--	QS_INH_DBG,
--	QSYS_PORT_MODE = QSYS << TARGET_OFFSET,
--	QSYS_SWITCH_PORT_MODE,
--	QSYS_STAT_CNT_CFG,
--	QSYS_EEE_CFG,
--	QSYS_EEE_THRES,
--	QSYS_IGR_NO_SHARING,
--	QSYS_EGR_NO_SHARING,
--	QSYS_SW_STATUS,
--	QSYS_EXT_CPU_CFG,
--	QSYS_PAD_CFG,
--	QSYS_CPU_GROUP_MAP,
--	QSYS_QMAP,
--	QSYS_ISDX_SGRP,
--	QSYS_TIMED_FRAME_ENTRY,
--	QSYS_TFRM_MISC,
--	QSYS_TFRM_PORT_DLY,
--	QSYS_TFRM_TIMER_CFG_1,
--	QSYS_TFRM_TIMER_CFG_2,
--	QSYS_TFRM_TIMER_CFG_3,
--	QSYS_TFRM_TIMER_CFG_4,
--	QSYS_TFRM_TIMER_CFG_5,
--	QSYS_TFRM_TIMER_CFG_6,
--	QSYS_TFRM_TIMER_CFG_7,
--	QSYS_TFRM_TIMER_CFG_8,
--	QSYS_RED_PROFILE,
--	QSYS_RES_QOS_MODE,
--	QSYS_RES_CFG,
--	QSYS_RES_STAT,
--	QSYS_EGR_DROP_MODE,
--	QSYS_EQ_CTRL,
--	QSYS_EVENTS_CORE,
--	QSYS_QMAXSDU_CFG_0,
--	QSYS_QMAXSDU_CFG_1,
--	QSYS_QMAXSDU_CFG_2,
--	QSYS_QMAXSDU_CFG_3,
--	QSYS_QMAXSDU_CFG_4,
--	QSYS_QMAXSDU_CFG_5,
--	QSYS_QMAXSDU_CFG_6,
--	QSYS_QMAXSDU_CFG_7,
--	QSYS_PREEMPTION_CFG,
--	QSYS_CIR_CFG,
--	QSYS_EIR_CFG,
--	QSYS_SE_CFG,
--	QSYS_SE_DWRR_CFG,
--	QSYS_SE_CONNECT,
--	QSYS_SE_DLB_SENSE,
--	QSYS_CIR_STATE,
--	QSYS_EIR_STATE,
--	QSYS_SE_STATE,
--	QSYS_HSCH_MISC_CFG,
--	QSYS_TAG_CONFIG,
--	QSYS_TAS_PARAM_CFG_CTRL,
--	QSYS_PORT_MAX_SDU,
--	QSYS_PARAM_CFG_REG_1,
--	QSYS_PARAM_CFG_REG_2,
--	QSYS_PARAM_CFG_REG_3,
--	QSYS_PARAM_CFG_REG_4,
--	QSYS_PARAM_CFG_REG_5,
--	QSYS_GCL_CFG_REG_1,
--	QSYS_GCL_CFG_REG_2,
--	QSYS_PARAM_STATUS_REG_1,
--	QSYS_PARAM_STATUS_REG_2,
--	QSYS_PARAM_STATUS_REG_3,
--	QSYS_PARAM_STATUS_REG_4,
--	QSYS_PARAM_STATUS_REG_5,
--	QSYS_PARAM_STATUS_REG_6,
--	QSYS_PARAM_STATUS_REG_7,
--	QSYS_PARAM_STATUS_REG_8,
--	QSYS_PARAM_STATUS_REG_9,
--	QSYS_GCL_STATUS_REG_1,
--	QSYS_GCL_STATUS_REG_2,
--	REW_PORT_VLAN_CFG = REW << TARGET_OFFSET,
--	REW_TAG_CFG,
--	REW_PORT_CFG,
--	REW_DSCP_CFG,
--	REW_PCP_DEI_QOS_MAP_CFG,
--	REW_PTP_CFG,
--	REW_PTP_DLY1_CFG,
--	REW_RED_TAG_CFG,
--	REW_DSCP_REMAP_DP1_CFG,
--	REW_DSCP_REMAP_CFG,
--	REW_STAT_CFG,
--	REW_REW_STICKY,
--	REW_PPT,
--	SYS_COUNT_RX_OCTETS = SYS << TARGET_OFFSET,
--	SYS_COUNT_RX_UNICAST,
--	SYS_COUNT_RX_MULTICAST,
--	SYS_COUNT_RX_BROADCAST,
--	SYS_COUNT_RX_SHORTS,
--	SYS_COUNT_RX_FRAGMENTS,
--	SYS_COUNT_RX_JABBERS,
--	SYS_COUNT_RX_CRC_ALIGN_ERRS,
--	SYS_COUNT_RX_SYM_ERRS,
--	SYS_COUNT_RX_64,
--	SYS_COUNT_RX_65_127,
--	SYS_COUNT_RX_128_255,
--	SYS_COUNT_RX_256_1023,
--	SYS_COUNT_RX_1024_1526,
--	SYS_COUNT_RX_1527_MAX,
--	SYS_COUNT_RX_PAUSE,
--	SYS_COUNT_RX_CONTROL,
--	SYS_COUNT_RX_LONGS,
--	SYS_COUNT_RX_CLASSIFIED_DROPS,
--	SYS_COUNT_TX_OCTETS,
--	SYS_COUNT_TX_UNICAST,
--	SYS_COUNT_TX_MULTICAST,
--	SYS_COUNT_TX_BROADCAST,
--	SYS_COUNT_TX_COLLISION,
--	SYS_COUNT_TX_DROPS,
--	SYS_COUNT_TX_PAUSE,
--	SYS_COUNT_TX_64,
--	SYS_COUNT_TX_65_127,
--	SYS_COUNT_TX_128_511,
--	SYS_COUNT_TX_512_1023,
--	SYS_COUNT_TX_1024_1526,
--	SYS_COUNT_TX_1527_MAX,
--	SYS_COUNT_TX_AGING,
--	SYS_RESET_CFG,
--	SYS_SR_ETYPE_CFG,
--	SYS_VLAN_ETYPE_CFG,
--	SYS_PORT_MODE,
--	SYS_FRONT_PORT_MODE,
--	SYS_FRM_AGING,
--	SYS_STAT_CFG,
--	SYS_SW_STATUS,
--	SYS_MISC_CFG,
--	SYS_REW_MAC_HIGH_CFG,
--	SYS_REW_MAC_LOW_CFG,
--	SYS_TIMESTAMP_OFFSET,
--	SYS_CMID,
--	SYS_PAUSE_CFG,
--	SYS_PAUSE_TOT_CFG,
--	SYS_ATOP,
--	SYS_ATOP_TOT_CFG,
--	SYS_MAC_FC_CFG,
--	SYS_MMGT,
--	SYS_MMGT_FAST,
--	SYS_EVENTS_DIF,
--	SYS_EVENTS_CORE,
--	SYS_CNT,
--	SYS_PTP_STATUS,
--	SYS_PTP_TXSTAMP,
--	SYS_PTP_NXT,
--	SYS_PTP_CFG,
--	SYS_RAM_INIT,
--	SYS_CM_ADDR,
--	SYS_CM_DATA_WR,
--	SYS_CM_DATA_RD,
--	SYS_CM_OP,
--	SYS_CM_DATA,
--	S2_CORE_UPDATE_CTRL = S2 << TARGET_OFFSET,
--	S2_CORE_MV_CFG,
--	S2_CACHE_ENTRY_DAT,
--	S2_CACHE_MASK_DAT,
--	S2_CACHE_ACTION_DAT,
--	S2_CACHE_CNT_DAT,
--	S2_CACHE_TG_DAT,
--	PTP_PIN_CFG = PTP << TARGET_OFFSET,
--	PTP_PIN_TOD_SEC_MSB,
--	PTP_PIN_TOD_SEC_LSB,
--	PTP_PIN_TOD_NSEC,
--	PTP_CFG_MISC,
--	PTP_CLK_CFG_ADJ_CFG,
--	PTP_CLK_CFG_ADJ_FREQ,
--};
--
--enum ocelot_regfield {
--	ANA_ADVLEARN_VLAN_CHK,
--	ANA_ADVLEARN_LEARN_MIRROR,
--	ANA_ANEVENTS_FLOOD_DISCARD,
--	ANA_ANEVENTS_MSTI_DROP,
--	ANA_ANEVENTS_ACLKILL,
--	ANA_ANEVENTS_ACLUSED,
--	ANA_ANEVENTS_AUTOAGE,
--	ANA_ANEVENTS_VS2TTL1,
--	ANA_ANEVENTS_STORM_DROP,
--	ANA_ANEVENTS_LEARN_DROP,
--	ANA_ANEVENTS_AGED_ENTRY,
--	ANA_ANEVENTS_CPU_LEARN_FAILED,
--	ANA_ANEVENTS_AUTO_LEARN_FAILED,
--	ANA_ANEVENTS_LEARN_REMOVE,
--	ANA_ANEVENTS_AUTO_LEARNED,
--	ANA_ANEVENTS_AUTO_MOVED,
--	ANA_ANEVENTS_DROPPED,
--	ANA_ANEVENTS_CLASSIFIED_DROP,
--	ANA_ANEVENTS_CLASSIFIED_COPY,
--	ANA_ANEVENTS_VLAN_DISCARD,
--	ANA_ANEVENTS_FWD_DISCARD,
--	ANA_ANEVENTS_MULTICAST_FLOOD,
--	ANA_ANEVENTS_UNICAST_FLOOD,
--	ANA_ANEVENTS_DEST_KNOWN,
--	ANA_ANEVENTS_BUCKET3_MATCH,
--	ANA_ANEVENTS_BUCKET2_MATCH,
--	ANA_ANEVENTS_BUCKET1_MATCH,
--	ANA_ANEVENTS_BUCKET0_MATCH,
--	ANA_ANEVENTS_CPU_OPERATION,
--	ANA_ANEVENTS_DMAC_LOOKUP,
--	ANA_ANEVENTS_SMAC_LOOKUP,
--	ANA_ANEVENTS_SEQ_GEN_ERR_0,
--	ANA_ANEVENTS_SEQ_GEN_ERR_1,
--	ANA_TABLES_MACACCESS_B_DOM,
--	ANA_TABLES_MACTINDX_BUCKET,
--	ANA_TABLES_MACTINDX_M_INDEX,
--	QSYS_TIMED_FRAME_ENTRY_TFRM_VLD,
--	QSYS_TIMED_FRAME_ENTRY_TFRM_FP,
--	QSYS_TIMED_FRAME_ENTRY_TFRM_PORTNO,
--	QSYS_TIMED_FRAME_ENTRY_TFRM_TM_SEL,
--	QSYS_TIMED_FRAME_ENTRY_TFRM_TM_T,
--	SYS_RESET_CFG_CORE_ENA,
--	SYS_RESET_CFG_MEM_ENA,
--	SYS_RESET_CFG_MEM_INIT,
--	REGFIELD_MAX
--};
--
--enum ocelot_clk_pins {
--	ALT_PPS_PIN	= 1,
--	EXT_CLK_PIN,
--	ALT_LDST_PIN,
--	TOD_ACC_PIN
--};
--
- struct ocelot_multicast {
- 	struct list_head list;
- 	unsigned char addr[ETH_ALEN];
-@@ -429,88 +60,6 @@ struct ocelot_multicast {
- 	u16 ports;
- };
- 
--enum ocelot_tag_prefix {
--	OCELOT_TAG_PREFIX_DISABLED	= 0,
--	OCELOT_TAG_PREFIX_NONE,
--	OCELOT_TAG_PREFIX_SHORT,
--	OCELOT_TAG_PREFIX_LONG,
--};
--
--struct ocelot_port;
--struct ocelot;
--
--struct ocelot_stat_layout {
--	u32 offset;
--	char name[ETH_GSTRING_LEN];
--};
--
--struct ocelot_ops {
--	void (*pcs_init)(struct ocelot *ocelot, int port);
--	int (*reset)(struct ocelot *ocelot);
--};
--
--struct ocelot {
--	const struct ocelot_ops *ops;
--	struct device *dev;
--
--	struct regmap *targets[TARGET_MAX];
--	struct regmap_field *regfields[REGFIELD_MAX];
--	const u32 *const *map;
--	const struct ocelot_stat_layout *stats_layout;
--	unsigned int num_stats;
--
--	u8 base_mac[ETH_ALEN];
--
--	struct net_device *hw_bridge_dev;
--	u16 bridge_mask;
--	u16 bridge_fwd_mask;
--
--	struct workqueue_struct *ocelot_owq;
--
--	int shared_queue_sz;
--
--	u8 num_phys_ports;
--	u8 num_cpu_ports;
--	u8 cpu;
--	struct ocelot_port **ports;
--
--	u32 *lags;
--
--	/* Keep track of the vlan port masks */
--	u32 vlan_mask[VLAN_N_VID];
--
--	struct list_head multicast;
--
--	/* Workqueue to check statistics for overflow with its lock */
--	struct mutex stats_lock;
--	u64 *stats;
--	struct delayed_work stats_work;
--	struct workqueue_struct *stats_queue;
--
--	u8 ptp:1;
--	struct ptp_clock *ptp_clock;
--	struct ptp_clock_info ptp_info;
--	struct hwtstamp_config hwtstamp_config;
--	struct mutex ptp_lock; /* Protects the PTP interface state */
--	spinlock_t ptp_clock_lock; /* Protects the PTP clock */
--};
--
--struct ocelot_port {
--	struct ocelot *ocelot;
--
--	void __iomem *regs;
--
--	/* Ingress default VLAN (pvid) */
--	u16 pvid;
--
--	/* Egress default VLAN (vid) */
--	u16 vid;
--
--	u8 ptp_cmd;
--	struct list_head skbs;
--	u8 ts_id;
--};
--
- struct ocelot_port_private {
- 	struct ocelot_port port;
- 	struct net_device *dev;
-@@ -531,37 +80,12 @@ struct ocelot_skb {
- 	u8 id;
- };
- 
--u32 __ocelot_read_ix(struct ocelot *ocelot, u32 reg, u32 offset);
--#define ocelot_read_ix(ocelot, reg, gi, ri) __ocelot_read_ix(ocelot, reg, reg##_GSZ * (gi) + reg##_RSZ * (ri))
--#define ocelot_read_gix(ocelot, reg, gi) __ocelot_read_ix(ocelot, reg, reg##_GSZ * (gi))
--#define ocelot_read_rix(ocelot, reg, ri) __ocelot_read_ix(ocelot, reg, reg##_RSZ * (ri))
--#define ocelot_read(ocelot, reg) __ocelot_read_ix(ocelot, reg, 0)
--
--void __ocelot_write_ix(struct ocelot *ocelot, u32 val, u32 reg, u32 offset);
--#define ocelot_write_ix(ocelot, val, reg, gi, ri) __ocelot_write_ix(ocelot, val, reg, reg##_GSZ * (gi) + reg##_RSZ * (ri))
--#define ocelot_write_gix(ocelot, val, reg, gi) __ocelot_write_ix(ocelot, val, reg, reg##_GSZ * (gi))
--#define ocelot_write_rix(ocelot, val, reg, ri) __ocelot_write_ix(ocelot, val, reg, reg##_RSZ * (ri))
--#define ocelot_write(ocelot, val, reg) __ocelot_write_ix(ocelot, val, reg, 0)
--
--void __ocelot_rmw_ix(struct ocelot *ocelot, u32 val, u32 mask, u32 reg,
--		     u32 offset);
--#define ocelot_rmw_ix(ocelot, val, m, reg, gi, ri) __ocelot_rmw_ix(ocelot, val, m, reg, reg##_GSZ * (gi) + reg##_RSZ * (ri))
--#define ocelot_rmw_gix(ocelot, val, m, reg, gi) __ocelot_rmw_ix(ocelot, val, m, reg, reg##_GSZ * (gi))
--#define ocelot_rmw_rix(ocelot, val, m, reg, ri) __ocelot_rmw_ix(ocelot, val, m, reg, reg##_RSZ * (ri))
--#define ocelot_rmw(ocelot, val, m, reg) __ocelot_rmw_ix(ocelot, val, m, reg, 0)
--
- u32 ocelot_port_readl(struct ocelot_port *port, u32 reg);
- void ocelot_port_writel(struct ocelot_port *port, u32 val, u32 reg);
- 
--int ocelot_regfields_init(struct ocelot *ocelot,
--			  const struct reg_field *const regfields);
--struct regmap *ocelot_regmap_init(struct ocelot *ocelot, struct resource *res);
--
- #define ocelot_field_write(ocelot, reg, val) regmap_field_write((ocelot)->regfields[(reg)], (val))
- #define ocelot_field_read(ocelot, reg, val) regmap_field_read((ocelot)->regfields[(reg)], (val))
- 
--int ocelot_init(struct ocelot *ocelot);
--void ocelot_deinit(struct ocelot *ocelot);
- int ocelot_chip_init(struct ocelot *ocelot, const struct ocelot_ops *ops);
- int ocelot_probe_port(struct ocelot *ocelot, u8 port,
- 		      void __iomem *regs,
-@@ -575,7 +99,7 @@ extern struct notifier_block ocelot_netd
- extern struct notifier_block ocelot_switchdev_nb;
- extern struct notifier_block ocelot_switchdev_blocking_nb;
- 
--int ocelot_ptp_gettime64(struct ptp_clock_info *ptp, struct timespec64 *ts);
--void ocelot_get_hwtimestamp(struct ocelot *ocelot, struct timespec64 *ts);
-+#define ocelot_field_write(ocelot, reg, val) regmap_field_write((ocelot)->regfields[(reg)], (val))
-+#define ocelot_field_read(ocelot, reg, val) regmap_field_read((ocelot)->regfields[(reg)], (val))
- 
- #endif
---- /dev/null
-+++ b/include/soc/mscc/ocelot.h
-@@ -0,0 +1,539 @@
-+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
-+/* Copyright (c) 2017 Microsemi Corporation
-+ */
-+
-+#ifndef _SOC_MSCC_OCELOT_H
-+#define _SOC_MSCC_OCELOT_H
-+
-+#include <linux/ptp_clock_kernel.h>
-+#include <linux/net_tstamp.h>
-+#include <linux/if_vlan.h>
-+#include <linux/regmap.h>
-+#include <net/dsa.h>
-+
-+#define IFH_INJ_BYPASS			BIT(31)
-+#define IFH_INJ_POP_CNT_DISABLE		(3 << 28)
-+
-+#define IFH_TAG_TYPE_C			0
-+#define IFH_TAG_TYPE_S			1
-+
-+#define IFH_REW_OP_NOOP			0x0
-+#define IFH_REW_OP_DSCP			0x1
-+#define IFH_REW_OP_ONE_STEP_PTP		0x2
-+#define IFH_REW_OP_TWO_STEP_PTP		0x3
-+#define IFH_REW_OP_ORIGIN_PTP		0x5
-+
-+#define OCELOT_TAG_LEN			16
-+#define OCELOT_SHORT_PREFIX_LEN		4
-+#define OCELOT_LONG_PREFIX_LEN		16
-+
-+#define OCELOT_SPEED_2500		0
-+#define OCELOT_SPEED_1000		1
-+#define OCELOT_SPEED_100		2
-+#define OCELOT_SPEED_10			3
-+
-+#define TARGET_OFFSET			24
-+#define REG_MASK			GENMASK(TARGET_OFFSET - 1, 0)
-+#define REG(reg, offset)		[reg & REG_MASK] = offset
-+
-+#define REG_RESERVED_ADDR		0xffffffff
-+#define REG_RESERVED(reg)		REG(reg, REG_RESERVED_ADDR)
-+
-+enum ocelot_target {
-+	ANA = 1,
-+	QS,
-+	QSYS,
-+	REW,
-+	SYS,
-+	S2,
-+	HSIO,
-+	PTP,
-+	GCB,
-+	TARGET_MAX,
-+};
-+
-+enum ocelot_reg {
-+	ANA_ADVLEARN = ANA << TARGET_OFFSET,
-+	ANA_VLANMASK,
-+	ANA_PORT_B_DOMAIN,
-+	ANA_ANAGEFIL,
-+	ANA_ANEVENTS,
-+	ANA_STORMLIMIT_BURST,
-+	ANA_STORMLIMIT_CFG,
-+	ANA_ISOLATED_PORTS,
-+	ANA_COMMUNITY_PORTS,
-+	ANA_AUTOAGE,
-+	ANA_MACTOPTIONS,
-+	ANA_LEARNDISC,
-+	ANA_AGENCTRL,
-+	ANA_MIRRORPORTS,
-+	ANA_EMIRRORPORTS,
-+	ANA_FLOODING,
-+	ANA_FLOODING_IPMC,
-+	ANA_SFLOW_CFG,
-+	ANA_PORT_MODE,
-+	ANA_CUT_THRU_CFG,
-+	ANA_PGID_PGID,
-+	ANA_TABLES_ANMOVED,
-+	ANA_TABLES_MACHDATA,
-+	ANA_TABLES_MACLDATA,
-+	ANA_TABLES_STREAMDATA,
-+	ANA_TABLES_MACACCESS,
-+	ANA_TABLES_MACTINDX,
-+	ANA_TABLES_VLANACCESS,
-+	ANA_TABLES_VLANTIDX,
-+	ANA_TABLES_ISDXACCESS,
-+	ANA_TABLES_ISDXTIDX,
-+	ANA_TABLES_ENTRYLIM,
-+	ANA_TABLES_PTP_ID_HIGH,
-+	ANA_TABLES_PTP_ID_LOW,
-+	ANA_TABLES_STREAMACCESS,
-+	ANA_TABLES_STREAMTIDX,
-+	ANA_TABLES_SEQ_HISTORY,
-+	ANA_TABLES_SEQ_MASK,
-+	ANA_TABLES_SFID_MASK,
-+	ANA_TABLES_SFIDACCESS,
-+	ANA_TABLES_SFIDTIDX,
-+	ANA_MSTI_STATE,
-+	ANA_OAM_UPM_LM_CNT,
-+	ANA_SG_ACCESS_CTRL,
-+	ANA_SG_CONFIG_REG_1,
-+	ANA_SG_CONFIG_REG_2,
-+	ANA_SG_CONFIG_REG_3,
-+	ANA_SG_CONFIG_REG_4,
-+	ANA_SG_CONFIG_REG_5,
-+	ANA_SG_GCL_GS_CONFIG,
-+	ANA_SG_GCL_TI_CONFIG,
-+	ANA_SG_STATUS_REG_1,
-+	ANA_SG_STATUS_REG_2,
-+	ANA_SG_STATUS_REG_3,
-+	ANA_PORT_VLAN_CFG,
-+	ANA_PORT_DROP_CFG,
-+	ANA_PORT_QOS_CFG,
-+	ANA_PORT_VCAP_CFG,
-+	ANA_PORT_VCAP_S1_KEY_CFG,
-+	ANA_PORT_VCAP_S2_CFG,
-+	ANA_PORT_PCP_DEI_MAP,
-+	ANA_PORT_CPU_FWD_CFG,
-+	ANA_PORT_CPU_FWD_BPDU_CFG,
-+	ANA_PORT_CPU_FWD_GARP_CFG,
-+	ANA_PORT_CPU_FWD_CCM_CFG,
-+	ANA_PORT_PORT_CFG,
-+	ANA_PORT_POL_CFG,
-+	ANA_PORT_PTP_CFG,
-+	ANA_PORT_PTP_DLY1_CFG,
-+	ANA_PORT_PTP_DLY2_CFG,
-+	ANA_PORT_SFID_CFG,
-+	ANA_PFC_PFC_CFG,
-+	ANA_PFC_PFC_TIMER,
-+	ANA_IPT_OAM_MEP_CFG,
-+	ANA_IPT_IPT,
-+	ANA_PPT_PPT,
-+	ANA_FID_MAP_FID_MAP,
-+	ANA_AGGR_CFG,
-+	ANA_CPUQ_CFG,
-+	ANA_CPUQ_CFG2,
-+	ANA_CPUQ_8021_CFG,
-+	ANA_DSCP_CFG,
-+	ANA_DSCP_REWR_CFG,
-+	ANA_VCAP_RNG_TYPE_CFG,
-+	ANA_VCAP_RNG_VAL_CFG,
-+	ANA_VRAP_CFG,
-+	ANA_VRAP_HDR_DATA,
-+	ANA_VRAP_HDR_MASK,
-+	ANA_DISCARD_CFG,
-+	ANA_FID_CFG,
-+	ANA_POL_PIR_CFG,
-+	ANA_POL_CIR_CFG,
-+	ANA_POL_MODE_CFG,
-+	ANA_POL_PIR_STATE,
-+	ANA_POL_CIR_STATE,
-+	ANA_POL_STATE,
-+	ANA_POL_FLOWC,
-+	ANA_POL_HYST,
-+	ANA_POL_MISC_CFG,
-+	QS_XTR_GRP_CFG = QS << TARGET_OFFSET,
-+	QS_XTR_RD,
-+	QS_XTR_FRM_PRUNING,
-+	QS_XTR_FLUSH,
-+	QS_XTR_DATA_PRESENT,
-+	QS_XTR_CFG,
-+	QS_INJ_GRP_CFG,
-+	QS_INJ_WR,
-+	QS_INJ_CTRL,
-+	QS_INJ_STATUS,
-+	QS_INJ_ERR,
-+	QS_INH_DBG,
-+	QSYS_PORT_MODE = QSYS << TARGET_OFFSET,
-+	QSYS_SWITCH_PORT_MODE,
-+	QSYS_STAT_CNT_CFG,
-+	QSYS_EEE_CFG,
-+	QSYS_EEE_THRES,
-+	QSYS_IGR_NO_SHARING,
-+	QSYS_EGR_NO_SHARING,
-+	QSYS_SW_STATUS,
-+	QSYS_EXT_CPU_CFG,
-+	QSYS_PAD_CFG,
-+	QSYS_CPU_GROUP_MAP,
-+	QSYS_QMAP,
-+	QSYS_ISDX_SGRP,
-+	QSYS_TIMED_FRAME_ENTRY,
-+	QSYS_TFRM_MISC,
-+	QSYS_TFRM_PORT_DLY,
-+	QSYS_TFRM_TIMER_CFG_1,
-+	QSYS_TFRM_TIMER_CFG_2,
-+	QSYS_TFRM_TIMER_CFG_3,
-+	QSYS_TFRM_TIMER_CFG_4,
-+	QSYS_TFRM_TIMER_CFG_5,
-+	QSYS_TFRM_TIMER_CFG_6,
-+	QSYS_TFRM_TIMER_CFG_7,
-+	QSYS_TFRM_TIMER_CFG_8,
-+	QSYS_RED_PROFILE,
-+	QSYS_RES_QOS_MODE,
-+	QSYS_RES_CFG,
-+	QSYS_RES_STAT,
-+	QSYS_EGR_DROP_MODE,
-+	QSYS_EQ_CTRL,
-+	QSYS_EVENTS_CORE,
-+	QSYS_QMAXSDU_CFG_0,
-+	QSYS_QMAXSDU_CFG_1,
-+	QSYS_QMAXSDU_CFG_2,
-+	QSYS_QMAXSDU_CFG_3,
-+	QSYS_QMAXSDU_CFG_4,
-+	QSYS_QMAXSDU_CFG_5,
-+	QSYS_QMAXSDU_CFG_6,
-+	QSYS_QMAXSDU_CFG_7,
-+	QSYS_PREEMPTION_CFG,
-+	QSYS_CIR_CFG,
-+	QSYS_EIR_CFG,
-+	QSYS_SE_CFG,
-+	QSYS_SE_DWRR_CFG,
-+	QSYS_SE_CONNECT,
-+	QSYS_SE_DLB_SENSE,
-+	QSYS_CIR_STATE,
-+	QSYS_EIR_STATE,
-+	QSYS_SE_STATE,
-+	QSYS_HSCH_MISC_CFG,
-+	QSYS_TAG_CONFIG,
-+	QSYS_TAS_PARAM_CFG_CTRL,
-+	QSYS_PORT_MAX_SDU,
-+	QSYS_PARAM_CFG_REG_1,
-+	QSYS_PARAM_CFG_REG_2,
-+	QSYS_PARAM_CFG_REG_3,
-+	QSYS_PARAM_CFG_REG_4,
-+	QSYS_PARAM_CFG_REG_5,
-+	QSYS_GCL_CFG_REG_1,
-+	QSYS_GCL_CFG_REG_2,
-+	QSYS_PARAM_STATUS_REG_1,
-+	QSYS_PARAM_STATUS_REG_2,
-+	QSYS_PARAM_STATUS_REG_3,
-+	QSYS_PARAM_STATUS_REG_4,
-+	QSYS_PARAM_STATUS_REG_5,
-+	QSYS_PARAM_STATUS_REG_6,
-+	QSYS_PARAM_STATUS_REG_7,
-+	QSYS_PARAM_STATUS_REG_8,
-+	QSYS_PARAM_STATUS_REG_9,
-+	QSYS_GCL_STATUS_REG_1,
-+	QSYS_GCL_STATUS_REG_2,
-+	REW_PORT_VLAN_CFG = REW << TARGET_OFFSET,
-+	REW_TAG_CFG,
-+	REW_PORT_CFG,
-+	REW_DSCP_CFG,
-+	REW_PCP_DEI_QOS_MAP_CFG,
-+	REW_PTP_CFG,
-+	REW_PTP_DLY1_CFG,
-+	REW_RED_TAG_CFG,
-+	REW_DSCP_REMAP_DP1_CFG,
-+	REW_DSCP_REMAP_CFG,
-+	REW_STAT_CFG,
-+	REW_REW_STICKY,
-+	REW_PPT,
-+	SYS_COUNT_RX_OCTETS = SYS << TARGET_OFFSET,
-+	SYS_COUNT_RX_UNICAST,
-+	SYS_COUNT_RX_MULTICAST,
-+	SYS_COUNT_RX_BROADCAST,
-+	SYS_COUNT_RX_SHORTS,
-+	SYS_COUNT_RX_FRAGMENTS,
-+	SYS_COUNT_RX_JABBERS,
-+	SYS_COUNT_RX_CRC_ALIGN_ERRS,
-+	SYS_COUNT_RX_SYM_ERRS,
-+	SYS_COUNT_RX_64,
-+	SYS_COUNT_RX_65_127,
-+	SYS_COUNT_RX_128_255,
-+	SYS_COUNT_RX_256_1023,
-+	SYS_COUNT_RX_1024_1526,
-+	SYS_COUNT_RX_1527_MAX,
-+	SYS_COUNT_RX_PAUSE,
-+	SYS_COUNT_RX_CONTROL,
-+	SYS_COUNT_RX_LONGS,
-+	SYS_COUNT_RX_CLASSIFIED_DROPS,
-+	SYS_COUNT_TX_OCTETS,
-+	SYS_COUNT_TX_UNICAST,
-+	SYS_COUNT_TX_MULTICAST,
-+	SYS_COUNT_TX_BROADCAST,
-+	SYS_COUNT_TX_COLLISION,
-+	SYS_COUNT_TX_DROPS,
-+	SYS_COUNT_TX_PAUSE,
-+	SYS_COUNT_TX_64,
-+	SYS_COUNT_TX_65_127,
-+	SYS_COUNT_TX_128_511,
-+	SYS_COUNT_TX_512_1023,
-+	SYS_COUNT_TX_1024_1526,
-+	SYS_COUNT_TX_1527_MAX,
-+	SYS_COUNT_TX_AGING,
-+	SYS_RESET_CFG,
-+	SYS_SR_ETYPE_CFG,
-+	SYS_VLAN_ETYPE_CFG,
-+	SYS_PORT_MODE,
-+	SYS_FRONT_PORT_MODE,
-+	SYS_FRM_AGING,
-+	SYS_STAT_CFG,
-+	SYS_SW_STATUS,
-+	SYS_MISC_CFG,
-+	SYS_REW_MAC_HIGH_CFG,
-+	SYS_REW_MAC_LOW_CFG,
-+	SYS_TIMESTAMP_OFFSET,
-+	SYS_CMID,
-+	SYS_PAUSE_CFG,
-+	SYS_PAUSE_TOT_CFG,
-+	SYS_ATOP,
-+	SYS_ATOP_TOT_CFG,
-+	SYS_MAC_FC_CFG,
-+	SYS_MMGT,
-+	SYS_MMGT_FAST,
-+	SYS_EVENTS_DIF,
-+	SYS_EVENTS_CORE,
-+	SYS_CNT,
-+	SYS_PTP_STATUS,
-+	SYS_PTP_TXSTAMP,
-+	SYS_PTP_NXT,
-+	SYS_PTP_CFG,
-+	SYS_RAM_INIT,
-+	SYS_CM_ADDR,
-+	SYS_CM_DATA_WR,
-+	SYS_CM_DATA_RD,
-+	SYS_CM_OP,
-+	SYS_CM_DATA,
-+	S2_CORE_UPDATE_CTRL = S2 << TARGET_OFFSET,
-+	S2_CORE_MV_CFG,
-+	S2_CACHE_ENTRY_DAT,
-+	S2_CACHE_MASK_DAT,
-+	S2_CACHE_ACTION_DAT,
-+	S2_CACHE_CNT_DAT,
-+	S2_CACHE_TG_DAT,
-+	PTP_PIN_CFG = PTP << TARGET_OFFSET,
-+	PTP_PIN_TOD_SEC_MSB,
-+	PTP_PIN_TOD_SEC_LSB,
-+	PTP_PIN_TOD_NSEC,
-+	PTP_CFG_MISC,
-+	PTP_CLK_CFG_ADJ_CFG,
-+	PTP_CLK_CFG_ADJ_FREQ,
-+	GCB_SOFT_RST = GCB << TARGET_OFFSET,
-+};
-+
-+enum ocelot_regfield {
-+	ANA_ADVLEARN_VLAN_CHK,
-+	ANA_ADVLEARN_LEARN_MIRROR,
-+	ANA_ANEVENTS_FLOOD_DISCARD,
-+	ANA_ANEVENTS_MSTI_DROP,
-+	ANA_ANEVENTS_ACLKILL,
-+	ANA_ANEVENTS_ACLUSED,
-+	ANA_ANEVENTS_AUTOAGE,
-+	ANA_ANEVENTS_VS2TTL1,
-+	ANA_ANEVENTS_STORM_DROP,
-+	ANA_ANEVENTS_LEARN_DROP,
-+	ANA_ANEVENTS_AGED_ENTRY,
-+	ANA_ANEVENTS_CPU_LEARN_FAILED,
-+	ANA_ANEVENTS_AUTO_LEARN_FAILED,
-+	ANA_ANEVENTS_LEARN_REMOVE,
-+	ANA_ANEVENTS_AUTO_LEARNED,
-+	ANA_ANEVENTS_AUTO_MOVED,
-+	ANA_ANEVENTS_DROPPED,
-+	ANA_ANEVENTS_CLASSIFIED_DROP,
-+	ANA_ANEVENTS_CLASSIFIED_COPY,
-+	ANA_ANEVENTS_VLAN_DISCARD,
-+	ANA_ANEVENTS_FWD_DISCARD,
-+	ANA_ANEVENTS_MULTICAST_FLOOD,
-+	ANA_ANEVENTS_UNICAST_FLOOD,
-+	ANA_ANEVENTS_DEST_KNOWN,
-+	ANA_ANEVENTS_BUCKET3_MATCH,
-+	ANA_ANEVENTS_BUCKET2_MATCH,
-+	ANA_ANEVENTS_BUCKET1_MATCH,
-+	ANA_ANEVENTS_BUCKET0_MATCH,
-+	ANA_ANEVENTS_CPU_OPERATION,
-+	ANA_ANEVENTS_DMAC_LOOKUP,
-+	ANA_ANEVENTS_SMAC_LOOKUP,
-+	ANA_ANEVENTS_SEQ_GEN_ERR_0,
-+	ANA_ANEVENTS_SEQ_GEN_ERR_1,
-+	ANA_TABLES_MACACCESS_B_DOM,
-+	ANA_TABLES_MACTINDX_BUCKET,
-+	ANA_TABLES_MACTINDX_M_INDEX,
-+	QSYS_TIMED_FRAME_ENTRY_TFRM_VLD,
-+	QSYS_TIMED_FRAME_ENTRY_TFRM_FP,
-+	QSYS_TIMED_FRAME_ENTRY_TFRM_PORTNO,
-+	QSYS_TIMED_FRAME_ENTRY_TFRM_TM_SEL,
-+	QSYS_TIMED_FRAME_ENTRY_TFRM_TM_T,
-+	SYS_RESET_CFG_CORE_ENA,
-+	SYS_RESET_CFG_MEM_ENA,
-+	SYS_RESET_CFG_MEM_INIT,
-+	GCB_SOFT_RST_SWC_RST,
-+	REGFIELD_MAX
-+};
-+
-+enum ocelot_clk_pins {
-+	ALT_PPS_PIN	= 1,
-+	EXT_CLK_PIN,
-+	ALT_LDST_PIN,
-+	TOD_ACC_PIN
-+};
-+
-+struct ocelot_stat_layout {
-+	u32 offset;
-+	char name[ETH_GSTRING_LEN];
-+};
-+
-+enum ocelot_tag_prefix {
-+	OCELOT_TAG_PREFIX_DISABLED	= 0,
-+	OCELOT_TAG_PREFIX_NONE,
-+	OCELOT_TAG_PREFIX_SHORT,
-+	OCELOT_TAG_PREFIX_LONG,
-+};
-+
-+struct ocelot;
-+
-+struct ocelot_ops {
-+	void (*pcs_init)(struct ocelot *ocelot, int port);
-+	int (*reset)(struct ocelot *ocelot);
-+};
-+
-+struct ocelot_port {
-+	struct ocelot			*ocelot;
-+
-+	void __iomem			*regs;
-+
-+	/* Ingress default VLAN (pvid) */
-+	u16				pvid;
-+
-+	/* Egress default VLAN (vid) */
-+	u16				vid;
-+
-+	u8				ptp_cmd;
-+	struct list_head		skbs;
-+	u8				ts_id;
-+};
-+
-+struct ocelot {
-+	struct device			*dev;
-+
-+	const struct ocelot_ops		*ops;
-+	struct regmap			*targets[TARGET_MAX];
-+	struct regmap_field		*regfields[REGFIELD_MAX];
-+	const u32 *const		*map;
-+	const struct ocelot_stat_layout	*stats_layout;
-+	unsigned int			num_stats;
-+
-+	int				shared_queue_sz;
-+
-+	struct net_device		*hw_bridge_dev;
-+	u16				bridge_mask;
-+	u16				bridge_fwd_mask;
-+
-+	struct ocelot_port		**ports;
-+
-+	u8				base_mac[ETH_ALEN];
-+
-+	/* Keep track of the vlan port masks */
-+	u32				vlan_mask[VLAN_N_VID];
-+
-+	u8				num_phys_ports;
-+	u8				num_cpu_ports;
-+	u8				cpu;
-+
-+	u32				*lags;
-+
-+	struct list_head		multicast;
-+
-+	/* Workqueue to check statistics for overflow with its lock */
-+	struct mutex			stats_lock;
-+	u64				*stats;
-+	struct delayed_work		stats_work;
-+	struct workqueue_struct		*stats_queue;
-+
-+	u8				ptp:1;
-+	struct ptp_clock		*ptp_clock;
-+	struct ptp_clock_info		ptp_info;
-+	struct hwtstamp_config		hwtstamp_config;
-+	/* Protects the PTP interface state */
-+	struct mutex			ptp_lock;
-+	/* Protects the PTP clock */
-+	spinlock_t			ptp_clock_lock;
-+
-+	void (*port_pcs_init)(struct ocelot_port *port);
-+};
-+
-+#define ocelot_read_ix(ocelot, reg, gi, ri) __ocelot_read_ix(ocelot, reg, reg##_GSZ * (gi) + reg##_RSZ * (ri))
-+#define ocelot_read_gix(ocelot, reg, gi) __ocelot_read_ix(ocelot, reg, reg##_GSZ * (gi))
-+#define ocelot_read_rix(ocelot, reg, ri) __ocelot_read_ix(ocelot, reg, reg##_RSZ * (ri))
-+#define ocelot_read(ocelot, reg) __ocelot_read_ix(ocelot, reg, 0)
-+
-+#define ocelot_write_ix(ocelot, val, reg, gi, ri) __ocelot_write_ix(ocelot, val, reg, reg##_GSZ * (gi) + reg##_RSZ * (ri))
-+#define ocelot_write_gix(ocelot, val, reg, gi) __ocelot_write_ix(ocelot, val, reg, reg##_GSZ * (gi))
-+#define ocelot_write_rix(ocelot, val, reg, ri) __ocelot_write_ix(ocelot, val, reg, reg##_RSZ * (ri))
-+#define ocelot_write(ocelot, val, reg) __ocelot_write_ix(ocelot, val, reg, 0)
-+
-+#define ocelot_rmw_ix(ocelot, val, m, reg, gi, ri) __ocelot_rmw_ix(ocelot, val, m, reg, reg##_GSZ * (gi) + reg##_RSZ * (ri))
-+#define ocelot_rmw_gix(ocelot, val, m, reg, gi) __ocelot_rmw_ix(ocelot, val, m, reg, reg##_GSZ * (gi))
-+#define ocelot_rmw_rix(ocelot, val, m, reg, ri) __ocelot_rmw_ix(ocelot, val, m, reg, reg##_RSZ * (ri))
-+#define ocelot_rmw(ocelot, val, m, reg) __ocelot_rmw_ix(ocelot, val, m, reg, 0)
-+
-+/* I/O */
-+u32 ocelot_port_readl(struct ocelot_port *port, u32 reg);
-+void ocelot_port_writel(struct ocelot_port *port, u32 val, u32 reg);
-+u32 __ocelot_read_ix(struct ocelot *ocelot, u32 reg, u32 offset);
-+void __ocelot_write_ix(struct ocelot *ocelot, u32 val, u32 reg, u32 offset);
-+void __ocelot_rmw_ix(struct ocelot *ocelot, u32 val, u32 mask, u32 reg,
-+		     u32 offset);
-+
-+/* Hardware initialization */
-+int ocelot_regfields_init(struct ocelot *ocelot,
-+			  const struct reg_field *const regfields);
-+struct regmap *ocelot_regmap_init(struct ocelot *ocelot, struct resource *res);
-+void ocelot_set_cpu_port(struct ocelot *ocelot, int cpu,
-+			 enum ocelot_tag_prefix injection,
-+			 enum ocelot_tag_prefix extraction);
-+int ocelot_init(struct ocelot *ocelot);
-+void ocelot_deinit(struct ocelot *ocelot);
-+void ocelot_init_port(struct ocelot *ocelot, int port);
-+
-+/* DSA callbacks */
-+void ocelot_port_enable(struct ocelot *ocelot, int port,
-+			struct phy_device *phy);
-+void ocelot_port_disable(struct ocelot *ocelot, int port);
-+void ocelot_get_strings(struct ocelot *ocelot, int port, u32 sset, u8 *data);
-+void ocelot_get_ethtool_stats(struct ocelot *ocelot, int port, u64 *data);
-+int ocelot_get_sset_count(struct ocelot *ocelot, int port, int sset);
-+int ocelot_get_ts_info(struct ocelot *ocelot, int port,
-+		       struct ethtool_ts_info *info);
-+void ocelot_set_ageing_time(struct ocelot *ocelot, unsigned int msecs);
-+void ocelot_adjust_link(struct ocelot *ocelot, int port,
-+			struct phy_device *phydev);
-+void ocelot_port_vlan_filtering(struct ocelot *ocelot, int port,
-+				bool vlan_aware);
-+void ocelot_bridge_stp_state_set(struct ocelot *ocelot, int port, u8 state);
-+int ocelot_port_bridge_join(struct ocelot *ocelot, int port,
-+			    struct net_device *bridge);
-+int ocelot_port_bridge_leave(struct ocelot *ocelot, int port,
-+			     struct net_device *bridge);
-+int ocelot_fdb_dump(struct ocelot *ocelot, int port,
-+		    dsa_fdb_dump_cb_t *cb, void *data);
-+int ocelot_fdb_add(struct ocelot *ocelot, int port,
-+		   const unsigned char *addr, u16 vid, bool vlan_aware);
-+int ocelot_fdb_del(struct ocelot *ocelot, int port,
-+		   const unsigned char *addr, u16 vid);
-+int ocelot_vlan_add(struct ocelot *ocelot, int port, u16 vid, bool pvid,
-+		    bool untagged);
-+int ocelot_vlan_del(struct ocelot *ocelot, int port, u16 vid);
-+int ocelot_ptp_gettime64(struct ptp_clock_info *ptp, struct timespec64 *ts);
-+void ocelot_get_hwtimestamp(struct ocelot *ocelot, struct timespec64 *ts);
-+
-+#endif
diff --git a/target/linux/layerscape/patches-5.4/701-net-0261-net-mscc-ocelot-publish-ocelot_sys.h-to-include-soc-.patch b/target/linux/layerscape/patches-5.4/701-net-0261-net-mscc-ocelot-publish-ocelot_sys.h-to-include-soc-.patch
deleted file mode 100644
index f65ae631dc..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0261-net-mscc-ocelot-publish-ocelot_sys.h-to-include-soc-.patch
+++ /dev/null
@@ -1,344 +0,0 @@
-From 53069d6527fc1d2709d559206cdbf0d7357954b7 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Thu, 14 Nov 2019 17:03:28 +0200
-Subject: [PATCH] net: mscc: ocelot: publish ocelot_sys.h to include/soc/mscc
-
-The Felix DSA driver needs to write to SYS_RAM_INIT_RAM_INIT for its own
-chip initialization process.
-
-Also update the MAINTAINERS file such that the headers exported by the
-ocelot driver are under the same maintainers' umbrella as the driver
-itself.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- MAINTAINERS                            |   1 +
- drivers/net/ethernet/mscc/ocelot.h     |   2 +-
- drivers/net/ethernet/mscc/ocelot_sys.h | 144 ---------------------------------
- include/soc/mscc/ocelot_sys.h          | 144 +++++++++++++++++++++++++++++++++
- 4 files changed, 146 insertions(+), 145 deletions(-)
- delete mode 100644 drivers/net/ethernet/mscc/ocelot_sys.h
- create mode 100644 include/soc/mscc/ocelot_sys.h
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -10826,6 +10826,7 @@ M:	Microchip Linux Driver Support <UNGLi
- L:	netdev@vger.kernel.org
- S:	Supported
- F:	drivers/net/ethernet/mscc/
-+F:	include/soc/mscc/ocelot*
- 
- MICROSOFT SURFACE PRO 3 BUTTON DRIVER
- M:	Chen Yu <yu.c.chen@intel.com>
---- a/drivers/net/ethernet/mscc/ocelot.h
-+++ b/drivers/net/ethernet/mscc/ocelot.h
-@@ -18,12 +18,12 @@
- #include <linux/ptp_clock_kernel.h>
- #include <linux/regmap.h>
- 
-+#include <soc/mscc/ocelot_sys.h>
- #include <soc/mscc/ocelot.h>
- #include "ocelot_ana.h"
- #include "ocelot_dev.h"
- #include "ocelot_qsys.h"
- #include "ocelot_rew.h"
--#include "ocelot_sys.h"
- #include "ocelot_qs.h"
- #include "ocelot_tc.h"
- #include "ocelot_ptp.h"
---- a/drivers/net/ethernet/mscc/ocelot_sys.h
-+++ /dev/null
-@@ -1,144 +0,0 @@
--/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
--/*
-- * Microsemi Ocelot Switch driver
-- *
-- * Copyright (c) 2017 Microsemi Corporation
-- */
--
--#ifndef _MSCC_OCELOT_SYS_H_
--#define _MSCC_OCELOT_SYS_H_
--
--#define SYS_COUNT_RX_OCTETS_RSZ                           0x4
--
--#define SYS_COUNT_TX_OCTETS_RSZ                           0x4
--
--#define SYS_PORT_MODE_RSZ                                 0x4
--
--#define SYS_PORT_MODE_DATA_WO_TS(x)                       (((x) << 5) & GENMASK(6, 5))
--#define SYS_PORT_MODE_DATA_WO_TS_M                        GENMASK(6, 5)
--#define SYS_PORT_MODE_DATA_WO_TS_X(x)                     (((x) & GENMASK(6, 5)) >> 5)
--#define SYS_PORT_MODE_INCL_INJ_HDR(x)                     (((x) << 3) & GENMASK(4, 3))
--#define SYS_PORT_MODE_INCL_INJ_HDR_M                      GENMASK(4, 3)
--#define SYS_PORT_MODE_INCL_INJ_HDR_X(x)                   (((x) & GENMASK(4, 3)) >> 3)
--#define SYS_PORT_MODE_INCL_XTR_HDR(x)                     (((x) << 1) & GENMASK(2, 1))
--#define SYS_PORT_MODE_INCL_XTR_HDR_M                      GENMASK(2, 1)
--#define SYS_PORT_MODE_INCL_XTR_HDR_X(x)                   (((x) & GENMASK(2, 1)) >> 1)
--#define SYS_PORT_MODE_INJ_HDR_ERR                         BIT(0)
--
--#define SYS_FRONT_PORT_MODE_RSZ                           0x4
--
--#define SYS_FRONT_PORT_MODE_HDX_MODE                      BIT(0)
--
--#define SYS_FRM_AGING_AGE_TX_ENA                          BIT(20)
--#define SYS_FRM_AGING_MAX_AGE(x)                          ((x) & GENMASK(19, 0))
--#define SYS_FRM_AGING_MAX_AGE_M                           GENMASK(19, 0)
--
--#define SYS_STAT_CFG_STAT_CLEAR_SHOT(x)                   (((x) << 10) & GENMASK(16, 10))
--#define SYS_STAT_CFG_STAT_CLEAR_SHOT_M                    GENMASK(16, 10)
--#define SYS_STAT_CFG_STAT_CLEAR_SHOT_X(x)                 (((x) & GENMASK(16, 10)) >> 10)
--#define SYS_STAT_CFG_STAT_VIEW(x)                         ((x) & GENMASK(9, 0))
--#define SYS_STAT_CFG_STAT_VIEW_M                          GENMASK(9, 0)
--
--#define SYS_SW_STATUS_RSZ                                 0x4
--
--#define SYS_SW_STATUS_PORT_RX_PAUSED                      BIT(0)
--
--#define SYS_MISC_CFG_PTP_RSRV_CLR                         BIT(1)
--#define SYS_MISC_CFG_PTP_DIS_NEG_RO                       BIT(0)
--
--#define SYS_REW_MAC_HIGH_CFG_RSZ                          0x4
--
--#define SYS_REW_MAC_LOW_CFG_RSZ                           0x4
--
--#define SYS_TIMESTAMP_OFFSET_ETH_TYPE_CFG(x)              (((x) << 6) & GENMASK(21, 6))
--#define SYS_TIMESTAMP_OFFSET_ETH_TYPE_CFG_M               GENMASK(21, 6)
--#define SYS_TIMESTAMP_OFFSET_ETH_TYPE_CFG_X(x)            (((x) & GENMASK(21, 6)) >> 6)
--#define SYS_TIMESTAMP_OFFSET_TIMESTAMP_OFFSET(x)          ((x) & GENMASK(5, 0))
--#define SYS_TIMESTAMP_OFFSET_TIMESTAMP_OFFSET_M           GENMASK(5, 0)
--
--#define SYS_PAUSE_CFG_RSZ                                 0x4
--
--#define SYS_PAUSE_CFG_PAUSE_START(x)                      (((x) << 10) & GENMASK(18, 10))
--#define SYS_PAUSE_CFG_PAUSE_START_M                       GENMASK(18, 10)
--#define SYS_PAUSE_CFG_PAUSE_START_X(x)                    (((x) & GENMASK(18, 10)) >> 10)
--#define SYS_PAUSE_CFG_PAUSE_STOP(x)                       (((x) << 1) & GENMASK(9, 1))
--#define SYS_PAUSE_CFG_PAUSE_STOP_M                        GENMASK(9, 1)
--#define SYS_PAUSE_CFG_PAUSE_STOP_X(x)                     (((x) & GENMASK(9, 1)) >> 1)
--#define SYS_PAUSE_CFG_PAUSE_ENA                           BIT(0)
--
--#define SYS_PAUSE_TOT_CFG_PAUSE_TOT_START(x)              (((x) << 9) & GENMASK(17, 9))
--#define SYS_PAUSE_TOT_CFG_PAUSE_TOT_START_M               GENMASK(17, 9)
--#define SYS_PAUSE_TOT_CFG_PAUSE_TOT_START_X(x)            (((x) & GENMASK(17, 9)) >> 9)
--#define SYS_PAUSE_TOT_CFG_PAUSE_TOT_STOP(x)               ((x) & GENMASK(8, 0))
--#define SYS_PAUSE_TOT_CFG_PAUSE_TOT_STOP_M                GENMASK(8, 0)
--
--#define SYS_ATOP_RSZ                                      0x4
--
--#define SYS_MAC_FC_CFG_RSZ                                0x4
--
--#define SYS_MAC_FC_CFG_FC_LINK_SPEED(x)                   (((x) << 26) & GENMASK(27, 26))
--#define SYS_MAC_FC_CFG_FC_LINK_SPEED_M                    GENMASK(27, 26)
--#define SYS_MAC_FC_CFG_FC_LINK_SPEED_X(x)                 (((x) & GENMASK(27, 26)) >> 26)
--#define SYS_MAC_FC_CFG_FC_LATENCY_CFG(x)                  (((x) << 20) & GENMASK(25, 20))
--#define SYS_MAC_FC_CFG_FC_LATENCY_CFG_M                   GENMASK(25, 20)
--#define SYS_MAC_FC_CFG_FC_LATENCY_CFG_X(x)                (((x) & GENMASK(25, 20)) >> 20)
--#define SYS_MAC_FC_CFG_ZERO_PAUSE_ENA                     BIT(18)
--#define SYS_MAC_FC_CFG_TX_FC_ENA                          BIT(17)
--#define SYS_MAC_FC_CFG_RX_FC_ENA                          BIT(16)
--#define SYS_MAC_FC_CFG_PAUSE_VAL_CFG(x)                   ((x) & GENMASK(15, 0))
--#define SYS_MAC_FC_CFG_PAUSE_VAL_CFG_M                    GENMASK(15, 0)
--
--#define SYS_MMGT_RELCNT(x)                                (((x) << 16) & GENMASK(31, 16))
--#define SYS_MMGT_RELCNT_M                                 GENMASK(31, 16)
--#define SYS_MMGT_RELCNT_X(x)                              (((x) & GENMASK(31, 16)) >> 16)
--#define SYS_MMGT_FREECNT(x)                               ((x) & GENMASK(15, 0))
--#define SYS_MMGT_FREECNT_M                                GENMASK(15, 0)
--
--#define SYS_MMGT_FAST_FREEVLD(x)                          (((x) << 4) & GENMASK(7, 4))
--#define SYS_MMGT_FAST_FREEVLD_M                           GENMASK(7, 4)
--#define SYS_MMGT_FAST_FREEVLD_X(x)                        (((x) & GENMASK(7, 4)) >> 4)
--#define SYS_MMGT_FAST_RELVLD(x)                           ((x) & GENMASK(3, 0))
--#define SYS_MMGT_FAST_RELVLD_M                            GENMASK(3, 0)
--
--#define SYS_EVENTS_DIF_RSZ                                0x4
--
--#define SYS_EVENTS_DIF_EV_DRX(x)                          (((x) << 6) & GENMASK(8, 6))
--#define SYS_EVENTS_DIF_EV_DRX_M                           GENMASK(8, 6)
--#define SYS_EVENTS_DIF_EV_DRX_X(x)                        (((x) & GENMASK(8, 6)) >> 6)
--#define SYS_EVENTS_DIF_EV_DTX(x)                          ((x) & GENMASK(5, 0))
--#define SYS_EVENTS_DIF_EV_DTX_M                           GENMASK(5, 0)
--
--#define SYS_EVENTS_CORE_EV_FWR                            BIT(2)
--#define SYS_EVENTS_CORE_EV_ANA(x)                         ((x) & GENMASK(1, 0))
--#define SYS_EVENTS_CORE_EV_ANA_M                          GENMASK(1, 0)
--
--#define SYS_CNT_GSZ                                       0x4
--
--#define SYS_PTP_STATUS_PTP_TXSTAMP_OAM                    BIT(29)
--#define SYS_PTP_STATUS_PTP_OVFL                           BIT(28)
--#define SYS_PTP_STATUS_PTP_MESS_VLD                       BIT(27)
--#define SYS_PTP_STATUS_PTP_MESS_ID(x)                     (((x) << 21) & GENMASK(26, 21))
--#define SYS_PTP_STATUS_PTP_MESS_ID_M                      GENMASK(26, 21)
--#define SYS_PTP_STATUS_PTP_MESS_ID_X(x)                   (((x) & GENMASK(26, 21)) >> 21)
--#define SYS_PTP_STATUS_PTP_MESS_TXPORT(x)                 (((x) << 16) & GENMASK(20, 16))
--#define SYS_PTP_STATUS_PTP_MESS_TXPORT_M                  GENMASK(20, 16)
--#define SYS_PTP_STATUS_PTP_MESS_TXPORT_X(x)               (((x) & GENMASK(20, 16)) >> 16)
--#define SYS_PTP_STATUS_PTP_MESS_SEQ_ID(x)                 ((x) & GENMASK(15, 0))
--#define SYS_PTP_STATUS_PTP_MESS_SEQ_ID_M                  GENMASK(15, 0)
--
--#define SYS_PTP_TXSTAMP_PTP_TXSTAMP(x)                    ((x) & GENMASK(29, 0))
--#define SYS_PTP_TXSTAMP_PTP_TXSTAMP_M                     GENMASK(29, 0)
--#define SYS_PTP_TXSTAMP_PTP_TXSTAMP_SEC                   BIT(31)
--
--#define SYS_PTP_NXT_PTP_NXT                               BIT(0)
--
--#define SYS_PTP_CFG_PTP_STAMP_WID(x)                      (((x) << 2) & GENMASK(7, 2))
--#define SYS_PTP_CFG_PTP_STAMP_WID_M                       GENMASK(7, 2)
--#define SYS_PTP_CFG_PTP_STAMP_WID_X(x)                    (((x) & GENMASK(7, 2)) >> 2)
--#define SYS_PTP_CFG_PTP_CF_ROLL_MODE(x)                   ((x) & GENMASK(1, 0))
--#define SYS_PTP_CFG_PTP_CF_ROLL_MODE_M                    GENMASK(1, 0)
--
--#define SYS_RAM_INIT_RAM_INIT                             BIT(1)
--#define SYS_RAM_INIT_RAM_CFG_HOOK                         BIT(0)
--
--#endif
---- /dev/null
-+++ b/include/soc/mscc/ocelot_sys.h
-@@ -0,0 +1,144 @@
-+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
-+/*
-+ * Microsemi Ocelot Switch driver
-+ *
-+ * Copyright (c) 2017 Microsemi Corporation
-+ */
-+
-+#ifndef _MSCC_OCELOT_SYS_H_
-+#define _MSCC_OCELOT_SYS_H_
-+
-+#define SYS_COUNT_RX_OCTETS_RSZ                           0x4
-+
-+#define SYS_COUNT_TX_OCTETS_RSZ                           0x4
-+
-+#define SYS_PORT_MODE_RSZ                                 0x4
-+
-+#define SYS_PORT_MODE_DATA_WO_TS(x)                       (((x) << 5) & GENMASK(6, 5))
-+#define SYS_PORT_MODE_DATA_WO_TS_M                        GENMASK(6, 5)
-+#define SYS_PORT_MODE_DATA_WO_TS_X(x)                     (((x) & GENMASK(6, 5)) >> 5)
-+#define SYS_PORT_MODE_INCL_INJ_HDR(x)                     (((x) << 3) & GENMASK(4, 3))
-+#define SYS_PORT_MODE_INCL_INJ_HDR_M                      GENMASK(4, 3)
-+#define SYS_PORT_MODE_INCL_INJ_HDR_X(x)                   (((x) & GENMASK(4, 3)) >> 3)
-+#define SYS_PORT_MODE_INCL_XTR_HDR(x)                     (((x) << 1) & GENMASK(2, 1))
-+#define SYS_PORT_MODE_INCL_XTR_HDR_M                      GENMASK(2, 1)
-+#define SYS_PORT_MODE_INCL_XTR_HDR_X(x)                   (((x) & GENMASK(2, 1)) >> 1)
-+#define SYS_PORT_MODE_INJ_HDR_ERR                         BIT(0)
-+
-+#define SYS_FRONT_PORT_MODE_RSZ                           0x4
-+
-+#define SYS_FRONT_PORT_MODE_HDX_MODE                      BIT(0)
-+
-+#define SYS_FRM_AGING_AGE_TX_ENA                          BIT(20)
-+#define SYS_FRM_AGING_MAX_AGE(x)                          ((x) & GENMASK(19, 0))
-+#define SYS_FRM_AGING_MAX_AGE_M                           GENMASK(19, 0)
-+
-+#define SYS_STAT_CFG_STAT_CLEAR_SHOT(x)                   (((x) << 10) & GENMASK(16, 10))
-+#define SYS_STAT_CFG_STAT_CLEAR_SHOT_M                    GENMASK(16, 10)
-+#define SYS_STAT_CFG_STAT_CLEAR_SHOT_X(x)                 (((x) & GENMASK(16, 10)) >> 10)
-+#define SYS_STAT_CFG_STAT_VIEW(x)                         ((x) & GENMASK(9, 0))
-+#define SYS_STAT_CFG_STAT_VIEW_M                          GENMASK(9, 0)
-+
-+#define SYS_SW_STATUS_RSZ                                 0x4
-+
-+#define SYS_SW_STATUS_PORT_RX_PAUSED                      BIT(0)
-+
-+#define SYS_MISC_CFG_PTP_RSRV_CLR                         BIT(1)
-+#define SYS_MISC_CFG_PTP_DIS_NEG_RO                       BIT(0)
-+
-+#define SYS_REW_MAC_HIGH_CFG_RSZ                          0x4
-+
-+#define SYS_REW_MAC_LOW_CFG_RSZ                           0x4
-+
-+#define SYS_TIMESTAMP_OFFSET_ETH_TYPE_CFG(x)              (((x) << 6) & GENMASK(21, 6))
-+#define SYS_TIMESTAMP_OFFSET_ETH_TYPE_CFG_M               GENMASK(21, 6)
-+#define SYS_TIMESTAMP_OFFSET_ETH_TYPE_CFG_X(x)            (((x) & GENMASK(21, 6)) >> 6)
-+#define SYS_TIMESTAMP_OFFSET_TIMESTAMP_OFFSET(x)          ((x) & GENMASK(5, 0))
-+#define SYS_TIMESTAMP_OFFSET_TIMESTAMP_OFFSET_M           GENMASK(5, 0)
-+
-+#define SYS_PAUSE_CFG_RSZ                                 0x4
-+
-+#define SYS_PAUSE_CFG_PAUSE_START(x)                      (((x) << 10) & GENMASK(18, 10))
-+#define SYS_PAUSE_CFG_PAUSE_START_M                       GENMASK(18, 10)
-+#define SYS_PAUSE_CFG_PAUSE_START_X(x)                    (((x) & GENMASK(18, 10)) >> 10)
-+#define SYS_PAUSE_CFG_PAUSE_STOP(x)                       (((x) << 1) & GENMASK(9, 1))
-+#define SYS_PAUSE_CFG_PAUSE_STOP_M                        GENMASK(9, 1)
-+#define SYS_PAUSE_CFG_PAUSE_STOP_X(x)                     (((x) & GENMASK(9, 1)) >> 1)
-+#define SYS_PAUSE_CFG_PAUSE_ENA                           BIT(0)
-+
-+#define SYS_PAUSE_TOT_CFG_PAUSE_TOT_START(x)              (((x) << 9) & GENMASK(17, 9))
-+#define SYS_PAUSE_TOT_CFG_PAUSE_TOT_START_M               GENMASK(17, 9)
-+#define SYS_PAUSE_TOT_CFG_PAUSE_TOT_START_X(x)            (((x) & GENMASK(17, 9)) >> 9)
-+#define SYS_PAUSE_TOT_CFG_PAUSE_TOT_STOP(x)               ((x) & GENMASK(8, 0))
-+#define SYS_PAUSE_TOT_CFG_PAUSE_TOT_STOP_M                GENMASK(8, 0)
-+
-+#define SYS_ATOP_RSZ                                      0x4
-+
-+#define SYS_MAC_FC_CFG_RSZ                                0x4
-+
-+#define SYS_MAC_FC_CFG_FC_LINK_SPEED(x)                   (((x) << 26) & GENMASK(27, 26))
-+#define SYS_MAC_FC_CFG_FC_LINK_SPEED_M                    GENMASK(27, 26)
-+#define SYS_MAC_FC_CFG_FC_LINK_SPEED_X(x)                 (((x) & GENMASK(27, 26)) >> 26)
-+#define SYS_MAC_FC_CFG_FC_LATENCY_CFG(x)                  (((x) << 20) & GENMASK(25, 20))
-+#define SYS_MAC_FC_CFG_FC_LATENCY_CFG_M                   GENMASK(25, 20)
-+#define SYS_MAC_FC_CFG_FC_LATENCY_CFG_X(x)                (((x) & GENMASK(25, 20)) >> 20)
-+#define SYS_MAC_FC_CFG_ZERO_PAUSE_ENA                     BIT(18)
-+#define SYS_MAC_FC_CFG_TX_FC_ENA                          BIT(17)
-+#define SYS_MAC_FC_CFG_RX_FC_ENA                          BIT(16)
-+#define SYS_MAC_FC_CFG_PAUSE_VAL_CFG(x)                   ((x) & GENMASK(15, 0))
-+#define SYS_MAC_FC_CFG_PAUSE_VAL_CFG_M                    GENMASK(15, 0)
-+
-+#define SYS_MMGT_RELCNT(x)                                (((x) << 16) & GENMASK(31, 16))
-+#define SYS_MMGT_RELCNT_M                                 GENMASK(31, 16)
-+#define SYS_MMGT_RELCNT_X(x)                              (((x) & GENMASK(31, 16)) >> 16)
-+#define SYS_MMGT_FREECNT(x)                               ((x) & GENMASK(15, 0))
-+#define SYS_MMGT_FREECNT_M                                GENMASK(15, 0)
-+
-+#define SYS_MMGT_FAST_FREEVLD(x)                          (((x) << 4) & GENMASK(7, 4))
-+#define SYS_MMGT_FAST_FREEVLD_M                           GENMASK(7, 4)
-+#define SYS_MMGT_FAST_FREEVLD_X(x)                        (((x) & GENMASK(7, 4)) >> 4)
-+#define SYS_MMGT_FAST_RELVLD(x)                           ((x) & GENMASK(3, 0))
-+#define SYS_MMGT_FAST_RELVLD_M                            GENMASK(3, 0)
-+
-+#define SYS_EVENTS_DIF_RSZ                                0x4
-+
-+#define SYS_EVENTS_DIF_EV_DRX(x)                          (((x) << 6) & GENMASK(8, 6))
-+#define SYS_EVENTS_DIF_EV_DRX_M                           GENMASK(8, 6)
-+#define SYS_EVENTS_DIF_EV_DRX_X(x)                        (((x) & GENMASK(8, 6)) >> 6)
-+#define SYS_EVENTS_DIF_EV_DTX(x)                          ((x) & GENMASK(5, 0))
-+#define SYS_EVENTS_DIF_EV_DTX_M                           GENMASK(5, 0)
-+
-+#define SYS_EVENTS_CORE_EV_FWR                            BIT(2)
-+#define SYS_EVENTS_CORE_EV_ANA(x)                         ((x) & GENMASK(1, 0))
-+#define SYS_EVENTS_CORE_EV_ANA_M                          GENMASK(1, 0)
-+
-+#define SYS_CNT_GSZ                                       0x4
-+
-+#define SYS_PTP_STATUS_PTP_TXSTAMP_OAM                    BIT(29)
-+#define SYS_PTP_STATUS_PTP_OVFL                           BIT(28)
-+#define SYS_PTP_STATUS_PTP_MESS_VLD                       BIT(27)
-+#define SYS_PTP_STATUS_PTP_MESS_ID(x)                     (((x) << 21) & GENMASK(26, 21))
-+#define SYS_PTP_STATUS_PTP_MESS_ID_M                      GENMASK(26, 21)
-+#define SYS_PTP_STATUS_PTP_MESS_ID_X(x)                   (((x) & GENMASK(26, 21)) >> 21)
-+#define SYS_PTP_STATUS_PTP_MESS_TXPORT(x)                 (((x) << 16) & GENMASK(20, 16))
-+#define SYS_PTP_STATUS_PTP_MESS_TXPORT_M                  GENMASK(20, 16)
-+#define SYS_PTP_STATUS_PTP_MESS_TXPORT_X(x)               (((x) & GENMASK(20, 16)) >> 16)
-+#define SYS_PTP_STATUS_PTP_MESS_SEQ_ID(x)                 ((x) & GENMASK(15, 0))
-+#define SYS_PTP_STATUS_PTP_MESS_SEQ_ID_M                  GENMASK(15, 0)
-+
-+#define SYS_PTP_TXSTAMP_PTP_TXSTAMP(x)                    ((x) & GENMASK(29, 0))
-+#define SYS_PTP_TXSTAMP_PTP_TXSTAMP_M                     GENMASK(29, 0)
-+#define SYS_PTP_TXSTAMP_PTP_TXSTAMP_SEC                   BIT(31)
-+
-+#define SYS_PTP_NXT_PTP_NXT                               BIT(0)
-+
-+#define SYS_PTP_CFG_PTP_STAMP_WID(x)                      (((x) << 2) & GENMASK(7, 2))
-+#define SYS_PTP_CFG_PTP_STAMP_WID_M                       GENMASK(7, 2)
-+#define SYS_PTP_CFG_PTP_STAMP_WID_X(x)                    (((x) & GENMASK(7, 2)) >> 2)
-+#define SYS_PTP_CFG_PTP_CF_ROLL_MODE(x)                   ((x) & GENMASK(1, 0))
-+#define SYS_PTP_CFG_PTP_CF_ROLL_MODE_M                    GENMASK(1, 0)
-+
-+#define SYS_RAM_INIT_RAM_INIT                             BIT(1)
-+#define SYS_RAM_INIT_RAM_CFG_HOOK                         BIT(0)
-+
-+#endif
diff --git a/target/linux/layerscape/patches-5.4/701-net-0262-net-dsa-ocelot-add-tagger-for-Ocelot-Felix-switches.patch b/target/linux/layerscape/patches-5.4/701-net-0262-net-dsa-ocelot-add-tagger-for-Ocelot-Felix-switches.patch
deleted file mode 100644
index 5304bbca0a..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0262-net-dsa-ocelot-add-tagger-for-Ocelot-Felix-switches.patch
+++ /dev/null
@@ -1,331 +0,0 @@
-From 0254efd8d7e8f533b57bdf8665991fd5548c65a8 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Thu, 14 Nov 2019 17:03:29 +0200
-Subject: [PATCH] net: dsa: ocelot: add tagger for Ocelot/Felix switches
-
-While it is entirely possible that this tagger format is in fact more
-generic than just these 2 switch families, I don't have that knowledge.
-The Seville switch in NXP T1040 has a similar frame format, but there
-are enough differences (e.g. DEST field starts at bit 57 instead of 56)
-that calling this file tag_vitesse.c is a bit of a stretch at the
-moment. The frame format has been listed in a comment so that people who
-add support for further Vitesse switches can rework this tagger while
-keeping compatibility with Felix.
-
-The "ocelot" name was chosen instead of "felix" because even the Ocelot
-switch can act as a DSA device when it is used in NPI mode, and the Felix
-tagger format is almost identical. Currently it is only used for the
-Felix switch embedded in the NXP LS1028A chip.
-
-The ABI for this tagger should be considered "not stable" at the moment.
-The DSA tag is always placed before the Ethernet header and therefore,
-we are using the long prefix for RX tags to avoid putting the DSA master
-port in promiscuous mode. Once there will be an API in DSA for drivers
-to request DSA masters to be in promiscuous mode unconditionally, we
-will switch to the "no prefix" extraction frame header, which will save
-16 padding bytes for each RX frame.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- MAINTAINERS          |   7 ++
- include/net/dsa.h    |   2 +
- net/dsa/Kconfig      |   7 ++
- net/dsa/Makefile     |   1 +
- net/dsa/tag_ocelot.c | 229 +++++++++++++++++++++++++++++++++++++++++++++++++++
- 5 files changed, 246 insertions(+)
- create mode 100644 net/dsa/tag_ocelot.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -17356,6 +17356,13 @@ S:	Maintained
- F:	drivers/input/serio/userio.c
- F:	include/uapi/linux/userio.h
- 
-+VITESSE FELIX ETHERNET SWITCH DRIVER
-+M:	Vladimir Oltean <vladimir.oltean@nxp.com>
-+M:	Claudiu Manoil <claudiu.manoil@nxp.com>
-+L:	netdev@vger.kernel.org
-+S:	Maintained
-+F:	net/dsa/tag_ocelot.c
-+
- VIVID VIRTUAL VIDEO DRIVER
- M:	Hans Verkuil <hverkuil@xs4all.nl>
- L:	linux-media@vger.kernel.org
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -42,6 +42,7 @@ struct phylink_link_state;
- #define DSA_TAG_PROTO_8021Q_VALUE		12
- #define DSA_TAG_PROTO_SJA1105_VALUE		13
- #define DSA_TAG_PROTO_KSZ8795_VALUE		14
-+#define DSA_TAG_PROTO_OCELOT_VALUE		15
- #define DSA_TAG_PROTO_RTL4_A_VALUE		17
- 
- enum dsa_tag_protocol {
-@@ -60,6 +61,7 @@ enum dsa_tag_protocol {
- 	DSA_TAG_PROTO_8021Q		= DSA_TAG_PROTO_8021Q_VALUE,
- 	DSA_TAG_PROTO_SJA1105		= DSA_TAG_PROTO_SJA1105_VALUE,
- 	DSA_TAG_PROTO_KSZ8795		= DSA_TAG_PROTO_KSZ8795_VALUE,
-+	DSA_TAG_PROTO_OCELOT		= DSA_TAG_PROTO_OCELOT_VALUE,
- 	DSA_TAG_PROTO_RTL4_A		= DSA_TAG_PROTO_RTL4_A_VALUE,
- };
- 
---- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -87,6 +87,13 @@ config NET_DSA_TAG_RTL4_A
- 	  Realtek switches with 4 byte protocol A tags, sich as found in
- 	  the Realtek RTL8366RB.
- 
-+config NET_DSA_TAG_OCELOT
-+	tristate "Tag driver for Ocelot family of switches"
-+	select PACKING
-+	help
-+	  Say Y or M if you want to enable support for tagging frames for the
-+	  Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514, VSC9959).
-+
- config NET_DSA_TAG_QCA
- 	tristate "Tag driver for Qualcomm Atheros QCA8K switches"
- 	help
---- a/net/dsa/Makefile
-+++ b/net/dsa/Makefile
-@@ -13,6 +13,7 @@ obj-$(CONFIG_NET_DSA_TAG_KSZ) += tag_ksz
- obj-$(CONFIG_NET_DSA_TAG_RTL4_A) += tag_rtl4_a.o
- obj-$(CONFIG_NET_DSA_TAG_LAN9303) += tag_lan9303.o
- obj-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk.o
-+obj-$(CONFIG_NET_DSA_TAG_OCELOT) += tag_ocelot.o
- obj-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
- obj-$(CONFIG_NET_DSA_TAG_SJA1105) += tag_sja1105.o
- obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
---- /dev/null
-+++ b/net/dsa/tag_ocelot.c
-@@ -0,0 +1,229 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/* Copyright 2019 NXP Semiconductors
-+ */
-+#include <soc/mscc/ocelot.h>
-+#include <linux/packing.h>
-+#include "dsa_priv.h"
-+
-+/* The CPU injection header and the CPU extraction header can have 3 types of
-+ * prefixes: long, short and no prefix. The format of the header itself is the
-+ * same in all 3 cases.
-+ *
-+ * Extraction with long prefix:
-+ *
-+ * +-------------------+-------------------+------+------+------------+-------+
-+ * | ff:ff:ff:ff:ff:ff | ff:ff:ff:ff:ff:ff | 8880 | 000a | extraction | frame |
-+ * |                   |                   |      |      |   header   |       |
-+ * +-------------------+-------------------+------+------+------------+-------+
-+ *        48 bits             48 bits      16 bits 16 bits  128 bits
-+ *
-+ * Extraction with short prefix:
-+ *
-+ *                                         +------+------+------------+-------+
-+ *                                         | 8880 | 000a | extraction | frame |
-+ *                                         |      |      |   header   |       |
-+ *                                         +------+------+------------+-------+
-+ *                                         16 bits 16 bits  128 bits
-+ *
-+ * Extraction with no prefix:
-+ *
-+ *                                                       +------------+-------+
-+ *                                                       | extraction | frame |
-+ *                                                       |   header   |       |
-+ *                                                       +------------+-------+
-+ *                                                          128 bits
-+ *
-+ *
-+ * Injection with long prefix:
-+ *
-+ * +-------------------+-------------------+------+------+------------+-------+
-+ * |      any dmac     |      any smac     | 8880 | 000a | injection  | frame |
-+ * |                   |                   |      |      |   header   |       |
-+ * +-------------------+-------------------+------+------+------------+-------+
-+ *        48 bits             48 bits      16 bits 16 bits  128 bits
-+ *
-+ * Injection with short prefix:
-+ *
-+ *                                         +------+------+------------+-------+
-+ *                                         | 8880 | 000a | injection  | frame |
-+ *                                         |      |      |   header   |       |
-+ *                                         +------+------+------------+-------+
-+ *                                         16 bits 16 bits  128 bits
-+ *
-+ * Injection with no prefix:
-+ *
-+ *                                                       +------------+-------+
-+ *                                                       | injection  | frame |
-+ *                                                       |   header   |       |
-+ *                                                       +------------+-------+
-+ *                                                          128 bits
-+ *
-+ * The injection header looks like this (network byte order, bit 127
-+ * is part of lowest address byte in memory, bit 0 is part of highest
-+ * address byte):
-+ *
-+ *         +------+------+------+------+------+------+------+------+
-+ * 127:120 |BYPASS| MASQ |          MASQ_PORT        |REW_OP|REW_OP|
-+ *         +------+------+------+------+------+------+------+------+
-+ * 119:112 |                         REW_OP                        |
-+ *         +------+------+------+------+------+------+------+------+
-+ * 111:104 |                         REW_VAL                       |
-+ *         +------+------+------+------+------+------+------+------+
-+ * 103: 96 |                         REW_VAL                       |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  95: 88 |                         REW_VAL                       |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  87: 80 |                         REW_VAL                       |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  79: 72 |                          RSV                          |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  71: 64 |            RSV            |           DEST            |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  63: 56 |                         DEST                          |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  55: 48 |                          RSV                          |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  47: 40 |  RSV |         SRC_PORT          |     RSV     |TFRM_TIMER|
-+ *         +------+------+------+------+------+------+------+------+
-+ *  39: 32 |     TFRM_TIMER     |               RSV                |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  31: 24 |  RSV |  DP  |   POP_CNT   |           CPUQ            |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  23: 16 |           CPUQ            |      QOS_CLASS     |TAG_TYPE|
-+ *         +------+------+------+------+------+------+------+------+
-+ *  15:  8 |         PCP        |  DEI |            VID            |
-+ *         +------+------+------+------+------+------+------+------+
-+ *   7:  0 |                          VID                          |
-+ *         +------+------+------+------+------+------+------+------+
-+ *
-+ * And the extraction header looks like this:
-+ *
-+ *         +------+------+------+------+------+------+------+------+
-+ * 127:120 |  RSV |                  REW_OP                        |
-+ *         +------+------+------+------+------+------+------+------+
-+ * 119:112 |       REW_OP       |              REW_VAL             |
-+ *         +------+------+------+------+------+------+------+------+
-+ * 111:104 |                         REW_VAL                       |
-+ *         +------+------+------+------+------+------+------+------+
-+ * 103: 96 |                         REW_VAL                       |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  95: 88 |                         REW_VAL                       |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  87: 80 |       REW_VAL      |               LLEN               |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  79: 72 | LLEN |                      WLEN                      |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  71: 64 | WLEN |                      RSV                       |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  63: 56 |                          RSV                          |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  55: 48 |                          RSV                          |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  47: 40 | RSV  |          SRC_PORT         |       ACL_ID       |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  39: 32 |       ACL_ID       |  RSV |         SFLOW_ID          |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  31: 24 |ACL_HIT| DP  |  LRN_FLAGS  |           CPUQ            |
-+ *         +------+------+------+------+------+------+------+------+
-+ *  23: 16 |           CPUQ            |      QOS_CLASS     |TAG_TYPE|
-+ *         +------+------+------+------+------+------+------+------+
-+ *  15:  8 |         PCP        |  DEI |            VID            |
-+ *         +------+------+------+------+------+------+------+------+
-+ *   7:  0 |                          VID                          |
-+ *         +------+------+------+------+------+------+------+------+
-+ */
-+
-+static struct sk_buff *ocelot_xmit(struct sk_buff *skb,
-+				   struct net_device *netdev)
-+{
-+	struct dsa_port *dp = dsa_slave_to_port(netdev);
-+	u64 bypass, dest, src, qos_class;
-+	struct dsa_switch *ds = dp->ds;
-+	int port = dp->index;
-+	u8 *injection;
-+
-+	if (unlikely(skb_cow_head(skb, OCELOT_TAG_LEN) < 0)) {
-+		netdev_err(netdev, "Cannot make room for tag.\n");
-+		return NULL;
-+	}
-+
-+	injection = skb_push(skb, OCELOT_TAG_LEN);
-+
-+	memset(injection, 0, OCELOT_TAG_LEN);
-+
-+	src = dsa_upstream_port(ds, port);
-+	dest = BIT(port);
-+	bypass = true;
-+	qos_class = skb->priority;
-+
-+	packing(injection, &bypass,   127, 127, OCELOT_TAG_LEN, PACK, 0);
-+	packing(injection, &dest,      68,  56, OCELOT_TAG_LEN, PACK, 0);
-+	packing(injection, &src,       46,  43, OCELOT_TAG_LEN, PACK, 0);
-+	packing(injection, &qos_class, 19,  17, OCELOT_TAG_LEN, PACK, 0);
-+
-+	return skb;
-+}
-+
-+static struct sk_buff *ocelot_rcv(struct sk_buff *skb,
-+				  struct net_device *netdev,
-+				  struct packet_type *pt)
-+{
-+	u64 src_port, qos_class;
-+	u8 *start = skb->data;
-+	u8 *extraction;
-+
-+	/* Revert skb->data by the amount consumed by the DSA master,
-+	 * so it points to the beginning of the frame.
-+	 */
-+	skb_push(skb, ETH_HLEN);
-+	/* We don't care about the long prefix, it is just for easy entrance
-+	 * into the DSA master's RX filter. Discard it now by moving it into
-+	 * the headroom.
-+	 */
-+	skb_pull(skb, OCELOT_LONG_PREFIX_LEN);
-+	/* And skb->data now points to the extraction frame header.
-+	 * Keep a pointer to it.
-+	 */
-+	extraction = skb->data;
-+	/* Now the EFH is part of the headroom as well */
-+	skb_pull(skb, OCELOT_TAG_LEN);
-+	/* Reset the pointer to the real MAC header */
-+	skb_reset_mac_header(skb);
-+	skb_reset_mac_len(skb);
-+	/* And move skb->data to the correct location again */
-+	skb_pull(skb, ETH_HLEN);
-+
-+	/* Remove from inet csum the extraction header */
-+	skb_postpull_rcsum(skb, start, OCELOT_LONG_PREFIX_LEN + OCELOT_TAG_LEN);
-+
-+	packing(extraction, &src_port,  46, 43, OCELOT_TAG_LEN, UNPACK, 0);
-+	packing(extraction, &qos_class, 19, 17, OCELOT_TAG_LEN, UNPACK, 0);
-+
-+	skb->dev = dsa_master_find_slave(netdev, 0, src_port);
-+	if (!skb->dev)
-+		/* The switch will reflect back some frames sent through
-+		 * sockets opened on the bare DSA master. These will come back
-+		 * with src_port equal to the index of the CPU port, for which
-+		 * there is no slave registered. So don't print any error
-+		 * message here (ignore and drop those frames).
-+		 */
-+		return NULL;
-+
-+	skb->offload_fwd_mark = 1;
-+	skb->priority = qos_class;
-+
-+	return skb;
-+}
-+
-+static struct dsa_device_ops ocelot_netdev_ops = {
-+	.name			= "ocelot",
-+	.proto			= DSA_TAG_PROTO_OCELOT,
-+	.xmit			= ocelot_xmit,
-+	.rcv			= ocelot_rcv,
-+	.overhead		= OCELOT_TAG_LEN + OCELOT_LONG_PREFIX_LEN,
-+};
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_OCELOT);
-+
-+module_dsa_tag_driver(ocelot_netdev_ops);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0263-net-dsa-ocelot-add-driver-for-Felix-switch-family.patch b/target/linux/layerscape/patches-5.4/701-net-0263-net-dsa-ocelot-add-driver-for-Felix-switch-family.patch
deleted file mode 100644
index 5dc50c5ee6..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0263-net-dsa-ocelot-add-driver-for-Felix-switch-family.patch
+++ /dev/null
@@ -1,1163 +0,0 @@
-From 469b6adff1484015369993dbb86a2936b6517a7d Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Thu, 14 Nov 2019 17:03:30 +0200
-Subject: [PATCH] net: dsa: ocelot: add driver for Felix switch family
-
-This supports an Ethernet switching core from Vitesse / Microsemi /
-Microchip (VSC9959) which is part of the Ocelot family (a brand name),
-and whose code name is Felix. The switch can be (and is) integrated on
-different SoCs as a PCIe endpoint device.
-
-The functionality is provided by the core of the Ocelot switch driver
-(drivers/net/ethernet/mscc). In this regard, the current driver is an
-instance of Microsemi's Ocelot core driver, with a DSA front-end. It
-inherits its name from VSC9959's code name, to distinguish itself from
-the switchdev ocelot driver.
-
-The patch adds the logic for probing a PCI device and defines the
-register map for the VSC9959 switch core, since it has some differences
-in register addresses and bitfield mappings compared to the other Ocelot
-switches (VSC7511, VSC7512, VSC7513, VSC7514).
-
-The Felix driver declares the register map as part of the "instance
-table". Currently the VSC9959 inside NXP LS1028A is the only instance,
-but presumably it can support other switches in the Ocelot family, when
-used in DSA mode (Linux running on the external CPU, and not on the
-embedded MIPS).
-
-In a few cases, some h/w operations have to be done differently on
-VSC9959 due to missing bitfields.  This is the case for the switch core
-reset and init.  Because for this operation Ocelot uses some bits that
-are not present on Felix, the latter has to use a register from the
-global registers block (GCB) instead.
-
-Although it is a PCI driver, it relies on DT bindings for compatibility
-with DSA (CPU port link, PHY library). It does not have any custom
-device tree bindings, since we would like to minimize its dependency on
-device tree though.
-
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- MAINTAINERS                            |   1 +
- drivers/net/dsa/Kconfig                |   2 +
- drivers/net/dsa/Makefile               |   1 +
- drivers/net/dsa/ocelot/Kconfig         |  11 +
- drivers/net/dsa/ocelot/Makefile        |   6 +
- drivers/net/dsa/ocelot/felix.c         | 441 +++++++++++++++++++++++++
- drivers/net/dsa/ocelot/felix.h         |  37 +++
- drivers/net/dsa/ocelot/felix_vsc9959.c | 567 +++++++++++++++++++++++++++++++++
- 8 files changed, 1066 insertions(+)
- create mode 100644 drivers/net/dsa/ocelot/Kconfig
- create mode 100644 drivers/net/dsa/ocelot/Makefile
- create mode 100644 drivers/net/dsa/ocelot/felix.c
- create mode 100644 drivers/net/dsa/ocelot/felix.h
- create mode 100644 drivers/net/dsa/ocelot/felix_vsc9959.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -17361,6 +17361,7 @@ M:	Vladimir Oltean <vladimir.oltean@nxp.
- M:	Claudiu Manoil <claudiu.manoil@nxp.com>
- L:	netdev@vger.kernel.org
- S:	Maintained
-+F:	drivers/net/dsa/ocelot/*
- F:	net/dsa/tag_ocelot.c
- 
- VIVID VIRTUAL VIDEO DRIVER
---- a/drivers/net/dsa/Kconfig
-+++ b/drivers/net/dsa/Kconfig
-@@ -52,6 +52,8 @@ source "drivers/net/dsa/microchip/Kconfi
- 
- source "drivers/net/dsa/mv88e6xxx/Kconfig"
- 
-+source "drivers/net/dsa/ocelot/Kconfig"
-+
- source "drivers/net/dsa/sja1105/Kconfig"
- 
- config NET_DSA_QCA8K
---- a/drivers/net/dsa/Makefile
-+++ b/drivers/net/dsa/Makefile
-@@ -20,4 +20,5 @@ obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX_SPI
- obj-y				+= b53/
- obj-y				+= microchip/
- obj-y				+= mv88e6xxx/
-+obj-y				+= ocelot/
- obj-y				+= sja1105/
---- /dev/null
-+++ b/drivers/net/dsa/ocelot/Kconfig
-@@ -0,0 +1,11 @@
-+# SPDX-License-Identifier: GPL-2.0-only
-+config NET_DSA_MSCC_FELIX
-+	tristate "Ocelot / Felix Ethernet switch support"
-+	depends on NET_DSA && PCI
-+	select MSCC_OCELOT_SWITCH
-+	select NET_DSA_TAG_OCELOT
-+	help
-+	  This driver supports the VSC9959 network switch, which is a member of
-+	  the Vitesse / Microsemi / Microchip Ocelot family of switching cores.
-+	  It is embedded as a PCIe function of the NXP LS1028A ENETC integrated
-+	  endpoint.
---- /dev/null
-+++ b/drivers/net/dsa/ocelot/Makefile
-@@ -0,0 +1,6 @@
-+# SPDX-License-Identifier: GPL-2.0-only
-+obj-$(CONFIG_NET_DSA_MSCC_FELIX) += mscc_felix.o
-+
-+mscc_felix-objs := \
-+	felix.o \
-+	felix_vsc9959.o
---- /dev/null
-+++ b/drivers/net/dsa/ocelot/felix.c
-@@ -0,0 +1,441 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/* Copyright 2019 NXP Semiconductors
-+ */
-+#include <uapi/linux/if_bridge.h>
-+#include <soc/mscc/ocelot.h>
-+#include <linux/module.h>
-+#include <linux/pci.h>
-+#include <linux/of.h>
-+#include <net/dsa.h>
-+#include "felix.h"
-+
-+static enum dsa_tag_protocol felix_get_tag_protocol(struct dsa_switch *ds,
-+						    int port)
-+{
-+	return DSA_TAG_PROTO_OCELOT;
-+}
-+
-+static int felix_set_ageing_time(struct dsa_switch *ds,
-+				 unsigned int ageing_time)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	ocelot_set_ageing_time(ocelot, ageing_time);
-+
-+	return 0;
-+}
-+
-+static void felix_adjust_link(struct dsa_switch *ds, int port,
-+			      struct phy_device *phydev)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	ocelot_adjust_link(ocelot, port, phydev);
-+}
-+
-+static int felix_fdb_dump(struct dsa_switch *ds, int port,
-+			  dsa_fdb_dump_cb_t *cb, void *data)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	return ocelot_fdb_dump(ocelot, port, cb, data);
-+}
-+
-+static int felix_fdb_add(struct dsa_switch *ds, int port,
-+			 const unsigned char *addr, u16 vid)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+	bool vlan_aware;
-+
-+	vlan_aware = dsa_port_is_vlan_filtering(dsa_to_port(ds, port));
-+
-+	return ocelot_fdb_add(ocelot, port, addr, vid, vlan_aware);
-+}
-+
-+static int felix_fdb_del(struct dsa_switch *ds, int port,
-+			 const unsigned char *addr, u16 vid)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	return ocelot_fdb_del(ocelot, port, addr, vid);
-+}
-+
-+static void felix_bridge_stp_state_set(struct dsa_switch *ds, int port,
-+				       u8 state)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	return ocelot_bridge_stp_state_set(ocelot, port, state);
-+}
-+
-+static int felix_bridge_join(struct dsa_switch *ds, int port,
-+			     struct net_device *br)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	return ocelot_port_bridge_join(ocelot, port, br);
-+}
-+
-+static void felix_bridge_leave(struct dsa_switch *ds, int port,
-+			       struct net_device *br)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	ocelot_port_bridge_leave(ocelot, port, br);
-+}
-+
-+/* This callback needs to be present */
-+static int felix_vlan_prepare(struct dsa_switch *ds, int port,
-+			      const struct switchdev_obj_port_vlan *vlan)
-+{
-+	return 0;
-+}
-+
-+static int felix_vlan_filtering(struct dsa_switch *ds, int port, bool enabled)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	ocelot_port_vlan_filtering(ocelot, port, enabled);
-+
-+	return 0;
-+}
-+
-+static void felix_vlan_add(struct dsa_switch *ds, int port,
-+			   const struct switchdev_obj_port_vlan *vlan)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+	u16 vid;
-+	int err;
-+
-+	for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
-+		err = ocelot_vlan_add(ocelot, port, vid,
-+				      vlan->flags & BRIDGE_VLAN_INFO_PVID,
-+				      vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED);
-+		if (err) {
-+			dev_err(ds->dev, "Failed to add VLAN %d to port %d: %d\n",
-+				vid, port, err);
-+			return;
-+		}
-+	}
-+}
-+
-+static int felix_vlan_del(struct dsa_switch *ds, int port,
-+			  const struct switchdev_obj_port_vlan *vlan)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+	u16 vid;
-+	int err;
-+
-+	for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
-+		err = ocelot_vlan_del(ocelot, port, vid);
-+		if (err) {
-+			dev_err(ds->dev, "Failed to remove VLAN %d from port %d: %d\n",
-+				vid, port, err);
-+			return err;
-+		}
-+	}
-+	return 0;
-+}
-+
-+static int felix_port_enable(struct dsa_switch *ds, int port,
-+			     struct phy_device *phy)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	ocelot_port_enable(ocelot, port, phy);
-+
-+	return 0;
-+}
-+
-+static void felix_port_disable(struct dsa_switch *ds, int port)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	return ocelot_port_disable(ocelot, port);
-+}
-+
-+static void felix_get_strings(struct dsa_switch *ds, int port,
-+			      u32 stringset, u8 *data)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	return ocelot_get_strings(ocelot, port, stringset, data);
-+}
-+
-+static void felix_get_ethtool_stats(struct dsa_switch *ds, int port, u64 *data)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	ocelot_get_ethtool_stats(ocelot, port, data);
-+}
-+
-+static int felix_get_sset_count(struct dsa_switch *ds, int port, int sset)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	return ocelot_get_sset_count(ocelot, port, sset);
-+}
-+
-+static int felix_get_ts_info(struct dsa_switch *ds, int port,
-+			     struct ethtool_ts_info *info)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	return ocelot_get_ts_info(ocelot, port, info);
-+}
-+
-+static int felix_init_structs(struct felix *felix, int num_phys_ports)
-+{
-+	struct ocelot *ocelot = &felix->ocelot;
-+	resource_size_t base;
-+	int port, i, err;
-+
-+	ocelot->num_phys_ports = num_phys_ports;
-+	ocelot->ports = devm_kcalloc(ocelot->dev, num_phys_ports,
-+				     sizeof(struct ocelot_port *), GFP_KERNEL);
-+	if (!ocelot->ports)
-+		return -ENOMEM;
-+
-+	ocelot->map		= felix->info->map;
-+	ocelot->stats_layout	= felix->info->stats_layout;
-+	ocelot->num_stats	= felix->info->num_stats;
-+	ocelot->shared_queue_sz	= felix->info->shared_queue_sz;
-+	ocelot->ops		= felix->info->ops;
-+
-+	base = pci_resource_start(felix->pdev, felix->info->pci_bar);
-+
-+	for (i = 0; i < TARGET_MAX; i++) {
-+		struct regmap *target;
-+		struct resource *res;
-+
-+		if (!felix->info->target_io_res[i].name)
-+			continue;
-+
-+		res = &felix->info->target_io_res[i];
-+		res->flags = IORESOURCE_MEM;
-+		res->start += base;
-+		res->end += base;
-+
-+		target = ocelot_regmap_init(ocelot, res);
-+		if (IS_ERR(target)) {
-+			dev_err(ocelot->dev,
-+				"Failed to map device memory space\n");
-+			return PTR_ERR(target);
-+		}
-+
-+		ocelot->targets[i] = target;
-+	}
-+
-+	err = ocelot_regfields_init(ocelot, felix->info->regfields);
-+	if (err) {
-+		dev_err(ocelot->dev, "failed to init reg fields map\n");
-+		return err;
-+	}
-+
-+	for (port = 0; port < num_phys_ports; port++) {
-+		struct ocelot_port *ocelot_port;
-+		void __iomem *port_regs;
-+		struct resource *res;
-+
-+		ocelot_port = devm_kzalloc(ocelot->dev,
-+					   sizeof(struct ocelot_port),
-+					   GFP_KERNEL);
-+		if (!ocelot_port) {
-+			dev_err(ocelot->dev,
-+				"failed to allocate port memory\n");
-+			return -ENOMEM;
-+		}
-+
-+		res = &felix->info->port_io_res[port];
-+		res->flags = IORESOURCE_MEM;
-+		res->start += base;
-+		res->end += base;
-+
-+		port_regs = devm_ioremap_resource(ocelot->dev, res);
-+		if (IS_ERR(port_regs)) {
-+			dev_err(ocelot->dev,
-+				"failed to map registers for port %d\n", port);
-+			return PTR_ERR(port_regs);
-+		}
-+
-+		ocelot_port->ocelot = ocelot;
-+		ocelot_port->regs = port_regs;
-+		ocelot->ports[port] = ocelot_port;
-+	}
-+
-+	return 0;
-+}
-+
-+/* Hardware initialization done here so that we can allocate structures with
-+ * devm without fear of dsa_register_switch returning -EPROBE_DEFER and causing
-+ * us to allocate structures twice (leak memory) and map PCI memory twice
-+ * (which will not work).
-+ */
-+static int felix_setup(struct dsa_switch *ds)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+	struct felix *felix = ocelot_to_felix(ocelot);
-+	int port, err;
-+
-+	err = felix_init_structs(felix, ds->num_ports);
-+	if (err)
-+		return err;
-+
-+	ocelot_init(ocelot);
-+
-+	for (port = 0; port < ds->num_ports; port++) {
-+		ocelot_init_port(ocelot, port);
-+
-+		if (port == dsa_upstream_port(ds, port))
-+			ocelot_set_cpu_port(ocelot, port,
-+					    OCELOT_TAG_PREFIX_NONE,
-+					    OCELOT_TAG_PREFIX_LONG);
-+	}
-+
-+	return 0;
-+}
-+
-+static void felix_teardown(struct dsa_switch *ds)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	/* stop workqueue thread */
-+	ocelot_deinit(ocelot);
-+}
-+
-+static const struct dsa_switch_ops felix_switch_ops = {
-+	.get_tag_protocol	= felix_get_tag_protocol,
-+	.setup			= felix_setup,
-+	.teardown		= felix_teardown,
-+	.set_ageing_time	= felix_set_ageing_time,
-+	.get_strings		= felix_get_strings,
-+	.get_ethtool_stats	= felix_get_ethtool_stats,
-+	.get_sset_count		= felix_get_sset_count,
-+	.get_ts_info		= felix_get_ts_info,
-+	.adjust_link		= felix_adjust_link,
-+	.port_enable		= felix_port_enable,
-+	.port_disable		= felix_port_disable,
-+	.port_fdb_dump		= felix_fdb_dump,
-+	.port_fdb_add		= felix_fdb_add,
-+	.port_fdb_del		= felix_fdb_del,
-+	.port_bridge_join	= felix_bridge_join,
-+	.port_bridge_leave	= felix_bridge_leave,
-+	.port_stp_state_set	= felix_bridge_stp_state_set,
-+	.port_vlan_prepare	= felix_vlan_prepare,
-+	.port_vlan_filtering	= felix_vlan_filtering,
-+	.port_vlan_add		= felix_vlan_add,
-+	.port_vlan_del		= felix_vlan_del,
-+};
-+
-+static struct felix_info *felix_instance_tbl[] = {
-+	[FELIX_INSTANCE_VSC9959] = &felix_info_vsc9959,
-+};
-+
-+static int felix_pci_probe(struct pci_dev *pdev,
-+			   const struct pci_device_id *id)
-+{
-+	enum felix_instance instance = id->driver_data;
-+	struct dsa_switch *ds;
-+	struct ocelot *ocelot;
-+	struct felix *felix;
-+	int err;
-+
-+	err = pci_enable_device(pdev);
-+	if (err) {
-+		dev_err(&pdev->dev, "device enable failed\n");
-+		goto err_pci_enable;
-+	}
-+
-+	/* set up for high or low dma */
-+	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
-+	if (err) {
-+		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
-+		if (err) {
-+			dev_err(&pdev->dev,
-+				"DMA configuration failed: 0x%x\n", err);
-+			goto err_dma;
-+		}
-+	}
-+
-+	felix = kzalloc(sizeof(struct felix), GFP_KERNEL);
-+	if (!felix) {
-+		err = -ENOMEM;
-+		dev_err(&pdev->dev, "Failed to allocate driver memory\n");
-+		goto err_alloc_felix;
-+	}
-+
-+	pci_set_drvdata(pdev, felix);
-+	ocelot = &felix->ocelot;
-+	ocelot->dev = &pdev->dev;
-+	felix->pdev = pdev;
-+	felix->info = felix_instance_tbl[instance];
-+
-+	pci_set_master(pdev);
-+
-+	ds = kzalloc(sizeof(struct dsa_switch), GFP_KERNEL);
-+	if (!ds) {
-+		err = -ENOMEM;
-+		dev_err(&pdev->dev, "Failed to allocate DSA switch\n");
-+		goto err_alloc_ds;
-+	}
-+
-+	ds->dev = &pdev->dev;
-+	ds->num_ports = felix->info->num_ports;
-+	ds->ops = &felix_switch_ops;
-+	ds->priv = ocelot;
-+	felix->ds = ds;
-+
-+	err = dsa_register_switch(ds);
-+	if (err) {
-+		dev_err(&pdev->dev, "Failed to register DSA switch: %d\n", err);
-+		goto err_register_ds;
-+	}
-+
-+	return 0;
-+
-+err_register_ds:
-+	kfree(ds);
-+err_alloc_ds:
-+err_alloc_felix:
-+	kfree(felix);
-+err_dma:
-+	pci_disable_device(pdev);
-+err_pci_enable:
-+	return err;
-+}
-+
-+static void felix_pci_remove(struct pci_dev *pdev)
-+{
-+	struct felix *felix;
-+
-+	felix = pci_get_drvdata(pdev);
-+
-+	dsa_unregister_switch(felix->ds);
-+
-+	kfree(felix->ds);
-+	kfree(felix);
-+
-+	pci_disable_device(pdev);
-+}
-+
-+static struct pci_device_id felix_ids[] = {
-+	{
-+		/* NXP LS1028A */
-+		PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0xEEF0),
-+		.driver_data = FELIX_INSTANCE_VSC9959,
-+	},
-+	{ 0, }
-+};
-+MODULE_DEVICE_TABLE(pci, felix_ids);
-+
-+static struct pci_driver felix_pci_driver = {
-+	.name		= KBUILD_MODNAME,
-+	.id_table	= felix_ids,
-+	.probe		= felix_pci_probe,
-+	.remove		= felix_pci_remove,
-+};
-+
-+module_pci_driver(felix_pci_driver);
-+
-+MODULE_DESCRIPTION("Felix Switch driver");
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/drivers/net/dsa/ocelot/felix.h
-@@ -0,0 +1,37 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/* Copyright 2019 NXP Semiconductors
-+ */
-+#ifndef _MSCC_FELIX_H
-+#define _MSCC_FELIX_H
-+
-+#define ocelot_to_felix(o)		container_of((o), struct felix, ocelot)
-+
-+/* Platform-specific information */
-+struct felix_info {
-+	struct resource			*target_io_res;
-+	struct resource			*port_io_res;
-+	const struct reg_field		*regfields;
-+	const u32 *const		*map;
-+	const struct ocelot_ops		*ops;
-+	int				shared_queue_sz;
-+	const struct ocelot_stat_layout	*stats_layout;
-+	unsigned int			num_stats;
-+	int				num_ports;
-+	int				pci_bar;
-+};
-+
-+extern struct felix_info		felix_info_vsc9959;
-+
-+enum felix_instance {
-+	FELIX_INSTANCE_VSC9959		= 0,
-+};
-+
-+/* DSA glue / front-end for struct ocelot */
-+struct felix {
-+	struct dsa_switch		*ds;
-+	struct pci_dev			*pdev;
-+	struct felix_info		*info;
-+	struct ocelot			ocelot;
-+};
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
-@@ -0,0 +1,567 @@
-+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-+/* Copyright 2017 Microsemi Corporation
-+ * Copyright 2018-2019 NXP Semiconductors
-+ */
-+#include <soc/mscc/ocelot_sys.h>
-+#include <soc/mscc/ocelot.h>
-+#include <linux/iopoll.h>
-+#include <linux/pci.h>
-+#include "felix.h"
-+
-+static const u32 vsc9959_ana_regmap[] = {
-+	REG(ANA_ADVLEARN,			0x0089a0),
-+	REG(ANA_VLANMASK,			0x0089a4),
-+	REG_RESERVED(ANA_PORT_B_DOMAIN),
-+	REG(ANA_ANAGEFIL,			0x0089ac),
-+	REG(ANA_ANEVENTS,			0x0089b0),
-+	REG(ANA_STORMLIMIT_BURST,		0x0089b4),
-+	REG(ANA_STORMLIMIT_CFG,			0x0089b8),
-+	REG(ANA_ISOLATED_PORTS,			0x0089c8),
-+	REG(ANA_COMMUNITY_PORTS,		0x0089cc),
-+	REG(ANA_AUTOAGE,			0x0089d0),
-+	REG(ANA_MACTOPTIONS,			0x0089d4),
-+	REG(ANA_LEARNDISC,			0x0089d8),
-+	REG(ANA_AGENCTRL,			0x0089dc),
-+	REG(ANA_MIRRORPORTS,			0x0089e0),
-+	REG(ANA_EMIRRORPORTS,			0x0089e4),
-+	REG(ANA_FLOODING,			0x0089e8),
-+	REG(ANA_FLOODING_IPMC,			0x008a08),
-+	REG(ANA_SFLOW_CFG,			0x008a0c),
-+	REG(ANA_PORT_MODE,			0x008a28),
-+	REG(ANA_CUT_THRU_CFG,			0x008a48),
-+	REG(ANA_PGID_PGID,			0x008400),
-+	REG(ANA_TABLES_ANMOVED,			0x007f1c),
-+	REG(ANA_TABLES_MACHDATA,		0x007f20),
-+	REG(ANA_TABLES_MACLDATA,		0x007f24),
-+	REG(ANA_TABLES_STREAMDATA,		0x007f28),
-+	REG(ANA_TABLES_MACACCESS,		0x007f2c),
-+	REG(ANA_TABLES_MACTINDX,		0x007f30),
-+	REG(ANA_TABLES_VLANACCESS,		0x007f34),
-+	REG(ANA_TABLES_VLANTIDX,		0x007f38),
-+	REG(ANA_TABLES_ISDXACCESS,		0x007f3c),
-+	REG(ANA_TABLES_ISDXTIDX,		0x007f40),
-+	REG(ANA_TABLES_ENTRYLIM,		0x007f00),
-+	REG(ANA_TABLES_PTP_ID_HIGH,		0x007f44),
-+	REG(ANA_TABLES_PTP_ID_LOW,		0x007f48),
-+	REG(ANA_TABLES_STREAMACCESS,		0x007f4c),
-+	REG(ANA_TABLES_STREAMTIDX,		0x007f50),
-+	REG(ANA_TABLES_SEQ_HISTORY,		0x007f54),
-+	REG(ANA_TABLES_SEQ_MASK,		0x007f58),
-+	REG(ANA_TABLES_SFID_MASK,		0x007f5c),
-+	REG(ANA_TABLES_SFIDACCESS,		0x007f60),
-+	REG(ANA_TABLES_SFIDTIDX,		0x007f64),
-+	REG(ANA_MSTI_STATE,			0x008600),
-+	REG(ANA_OAM_UPM_LM_CNT,			0x008000),
-+	REG(ANA_SG_ACCESS_CTRL,			0x008a64),
-+	REG(ANA_SG_CONFIG_REG_1,		0x007fb0),
-+	REG(ANA_SG_CONFIG_REG_2,		0x007fb4),
-+	REG(ANA_SG_CONFIG_REG_3,		0x007fb8),
-+	REG(ANA_SG_CONFIG_REG_4,		0x007fbc),
-+	REG(ANA_SG_CONFIG_REG_5,		0x007fc0),
-+	REG(ANA_SG_GCL_GS_CONFIG,		0x007f80),
-+	REG(ANA_SG_GCL_TI_CONFIG,		0x007f90),
-+	REG(ANA_SG_STATUS_REG_1,		0x008980),
-+	REG(ANA_SG_STATUS_REG_2,		0x008984),
-+	REG(ANA_SG_STATUS_REG_3,		0x008988),
-+	REG(ANA_PORT_VLAN_CFG,			0x007800),
-+	REG(ANA_PORT_DROP_CFG,			0x007804),
-+	REG(ANA_PORT_QOS_CFG,			0x007808),
-+	REG(ANA_PORT_VCAP_CFG,			0x00780c),
-+	REG(ANA_PORT_VCAP_S1_KEY_CFG,		0x007810),
-+	REG(ANA_PORT_VCAP_S2_CFG,		0x00781c),
-+	REG(ANA_PORT_PCP_DEI_MAP,		0x007820),
-+	REG(ANA_PORT_CPU_FWD_CFG,		0x007860),
-+	REG(ANA_PORT_CPU_FWD_BPDU_CFG,		0x007864),
-+	REG(ANA_PORT_CPU_FWD_GARP_CFG,		0x007868),
-+	REG(ANA_PORT_CPU_FWD_CCM_CFG,		0x00786c),
-+	REG(ANA_PORT_PORT_CFG,			0x007870),
-+	REG(ANA_PORT_POL_CFG,			0x007874),
-+	REG(ANA_PORT_PTP_CFG,			0x007878),
-+	REG(ANA_PORT_PTP_DLY1_CFG,		0x00787c),
-+	REG(ANA_PORT_PTP_DLY2_CFG,		0x007880),
-+	REG(ANA_PORT_SFID_CFG,			0x007884),
-+	REG(ANA_PFC_PFC_CFG,			0x008800),
-+	REG_RESERVED(ANA_PFC_PFC_TIMER),
-+	REG_RESERVED(ANA_IPT_OAM_MEP_CFG),
-+	REG_RESERVED(ANA_IPT_IPT),
-+	REG_RESERVED(ANA_PPT_PPT),
-+	REG_RESERVED(ANA_FID_MAP_FID_MAP),
-+	REG(ANA_AGGR_CFG,			0x008a68),
-+	REG(ANA_CPUQ_CFG,			0x008a6c),
-+	REG_RESERVED(ANA_CPUQ_CFG2),
-+	REG(ANA_CPUQ_8021_CFG,			0x008a74),
-+	REG(ANA_DSCP_CFG,			0x008ab4),
-+	REG(ANA_DSCP_REWR_CFG,			0x008bb4),
-+	REG(ANA_VCAP_RNG_TYPE_CFG,		0x008bf4),
-+	REG(ANA_VCAP_RNG_VAL_CFG,		0x008c14),
-+	REG_RESERVED(ANA_VRAP_CFG),
-+	REG_RESERVED(ANA_VRAP_HDR_DATA),
-+	REG_RESERVED(ANA_VRAP_HDR_MASK),
-+	REG(ANA_DISCARD_CFG,			0x008c40),
-+	REG(ANA_FID_CFG,			0x008c44),
-+	REG(ANA_POL_PIR_CFG,			0x004000),
-+	REG(ANA_POL_CIR_CFG,			0x004004),
-+	REG(ANA_POL_MODE_CFG,			0x004008),
-+	REG(ANA_POL_PIR_STATE,			0x00400c),
-+	REG(ANA_POL_CIR_STATE,			0x004010),
-+	REG_RESERVED(ANA_POL_STATE),
-+	REG(ANA_POL_FLOWC,			0x008c48),
-+	REG(ANA_POL_HYST,			0x008cb4),
-+	REG_RESERVED(ANA_POL_MISC_CFG),
-+};
-+
-+static const u32 vsc9959_qs_regmap[] = {
-+	REG(QS_XTR_GRP_CFG,			0x000000),
-+	REG(QS_XTR_RD,				0x000008),
-+	REG(QS_XTR_FRM_PRUNING,			0x000010),
-+	REG(QS_XTR_FLUSH,			0x000018),
-+	REG(QS_XTR_DATA_PRESENT,		0x00001c),
-+	REG(QS_XTR_CFG,				0x000020),
-+	REG(QS_INJ_GRP_CFG,			0x000024),
-+	REG(QS_INJ_WR,				0x00002c),
-+	REG(QS_INJ_CTRL,			0x000034),
-+	REG(QS_INJ_STATUS,			0x00003c),
-+	REG(QS_INJ_ERR,				0x000040),
-+	REG_RESERVED(QS_INH_DBG),
-+};
-+
-+static const u32 vsc9959_s2_regmap[] = {
-+	REG(S2_CORE_UPDATE_CTRL,		0x000000),
-+	REG(S2_CORE_MV_CFG,			0x000004),
-+	REG(S2_CACHE_ENTRY_DAT,			0x000008),
-+	REG(S2_CACHE_MASK_DAT,			0x000108),
-+	REG(S2_CACHE_ACTION_DAT,		0x000208),
-+	REG(S2_CACHE_CNT_DAT,			0x000308),
-+	REG(S2_CACHE_TG_DAT,			0x000388),
-+};
-+
-+static const u32 vsc9959_qsys_regmap[] = {
-+	REG(QSYS_PORT_MODE,			0x00f460),
-+	REG(QSYS_SWITCH_PORT_MODE,		0x00f480),
-+	REG(QSYS_STAT_CNT_CFG,			0x00f49c),
-+	REG(QSYS_EEE_CFG,			0x00f4a0),
-+	REG(QSYS_EEE_THRES,			0x00f4b8),
-+	REG(QSYS_IGR_NO_SHARING,		0x00f4bc),
-+	REG(QSYS_EGR_NO_SHARING,		0x00f4c0),
-+	REG(QSYS_SW_STATUS,			0x00f4c4),
-+	REG(QSYS_EXT_CPU_CFG,			0x00f4e0),
-+	REG_RESERVED(QSYS_PAD_CFG),
-+	REG(QSYS_CPU_GROUP_MAP,			0x00f4e8),
-+	REG_RESERVED(QSYS_QMAP),
-+	REG_RESERVED(QSYS_ISDX_SGRP),
-+	REG_RESERVED(QSYS_TIMED_FRAME_ENTRY),
-+	REG(QSYS_TFRM_MISC,			0x00f50c),
-+	REG(QSYS_TFRM_PORT_DLY,			0x00f510),
-+	REG(QSYS_TFRM_TIMER_CFG_1,		0x00f514),
-+	REG(QSYS_TFRM_TIMER_CFG_2,		0x00f518),
-+	REG(QSYS_TFRM_TIMER_CFG_3,		0x00f51c),
-+	REG(QSYS_TFRM_TIMER_CFG_4,		0x00f520),
-+	REG(QSYS_TFRM_TIMER_CFG_5,		0x00f524),
-+	REG(QSYS_TFRM_TIMER_CFG_6,		0x00f528),
-+	REG(QSYS_TFRM_TIMER_CFG_7,		0x00f52c),
-+	REG(QSYS_TFRM_TIMER_CFG_8,		0x00f530),
-+	REG(QSYS_RED_PROFILE,			0x00f534),
-+	REG(QSYS_RES_QOS_MODE,			0x00f574),
-+	REG(QSYS_RES_CFG,			0x00c000),
-+	REG(QSYS_RES_STAT,			0x00c004),
-+	REG(QSYS_EGR_DROP_MODE,			0x00f578),
-+	REG(QSYS_EQ_CTRL,			0x00f57c),
-+	REG_RESERVED(QSYS_EVENTS_CORE),
-+	REG(QSYS_QMAXSDU_CFG_0,			0x00f584),
-+	REG(QSYS_QMAXSDU_CFG_1,			0x00f5a0),
-+	REG(QSYS_QMAXSDU_CFG_2,			0x00f5bc),
-+	REG(QSYS_QMAXSDU_CFG_3,			0x00f5d8),
-+	REG(QSYS_QMAXSDU_CFG_4,			0x00f5f4),
-+	REG(QSYS_QMAXSDU_CFG_5,			0x00f610),
-+	REG(QSYS_QMAXSDU_CFG_6,			0x00f62c),
-+	REG(QSYS_QMAXSDU_CFG_7,			0x00f648),
-+	REG(QSYS_PREEMPTION_CFG,		0x00f664),
-+	REG_RESERVED(QSYS_CIR_CFG),
-+	REG(QSYS_EIR_CFG,			0x000004),
-+	REG(QSYS_SE_CFG,			0x000008),
-+	REG(QSYS_SE_DWRR_CFG,			0x00000c),
-+	REG_RESERVED(QSYS_SE_CONNECT),
-+	REG(QSYS_SE_DLB_SENSE,			0x000040),
-+	REG(QSYS_CIR_STATE,			0x000044),
-+	REG(QSYS_EIR_STATE,			0x000048),
-+	REG_RESERVED(QSYS_SE_STATE),
-+	REG(QSYS_HSCH_MISC_CFG,			0x00f67c),
-+	REG(QSYS_TAG_CONFIG,			0x00f680),
-+	REG(QSYS_TAS_PARAM_CFG_CTRL,		0x00f698),
-+	REG(QSYS_PORT_MAX_SDU,			0x00f69c),
-+	REG(QSYS_PARAM_CFG_REG_1,		0x00f440),
-+	REG(QSYS_PARAM_CFG_REG_2,		0x00f444),
-+	REG(QSYS_PARAM_CFG_REG_3,		0x00f448),
-+	REG(QSYS_PARAM_CFG_REG_4,		0x00f44c),
-+	REG(QSYS_PARAM_CFG_REG_5,		0x00f450),
-+	REG(QSYS_GCL_CFG_REG_1,			0x00f454),
-+	REG(QSYS_GCL_CFG_REG_2,			0x00f458),
-+	REG(QSYS_PARAM_STATUS_REG_1,		0x00f400),
-+	REG(QSYS_PARAM_STATUS_REG_2,		0x00f404),
-+	REG(QSYS_PARAM_STATUS_REG_3,		0x00f408),
-+	REG(QSYS_PARAM_STATUS_REG_4,		0x00f40c),
-+	REG(QSYS_PARAM_STATUS_REG_5,		0x00f410),
-+	REG(QSYS_PARAM_STATUS_REG_6,		0x00f414),
-+	REG(QSYS_PARAM_STATUS_REG_7,		0x00f418),
-+	REG(QSYS_PARAM_STATUS_REG_8,		0x00f41c),
-+	REG(QSYS_PARAM_STATUS_REG_9,		0x00f420),
-+	REG(QSYS_GCL_STATUS_REG_1,		0x00f424),
-+	REG(QSYS_GCL_STATUS_REG_2,		0x00f428),
-+};
-+
-+static const u32 vsc9959_rew_regmap[] = {
-+	REG(REW_PORT_VLAN_CFG,			0x000000),
-+	REG(REW_TAG_CFG,			0x000004),
-+	REG(REW_PORT_CFG,			0x000008),
-+	REG(REW_DSCP_CFG,			0x00000c),
-+	REG(REW_PCP_DEI_QOS_MAP_CFG,		0x000010),
-+	REG(REW_PTP_CFG,			0x000050),
-+	REG(REW_PTP_DLY1_CFG,			0x000054),
-+	REG(REW_RED_TAG_CFG,			0x000058),
-+	REG(REW_DSCP_REMAP_DP1_CFG,		0x000410),
-+	REG(REW_DSCP_REMAP_CFG,			0x000510),
-+	REG_RESERVED(REW_STAT_CFG),
-+	REG_RESERVED(REW_REW_STICKY),
-+	REG_RESERVED(REW_PPT),
-+};
-+
-+static const u32 vsc9959_sys_regmap[] = {
-+	REG(SYS_COUNT_RX_OCTETS,		0x000000),
-+	REG(SYS_COUNT_RX_MULTICAST,		0x000008),
-+	REG(SYS_COUNT_RX_SHORTS,		0x000010),
-+	REG(SYS_COUNT_RX_FRAGMENTS,		0x000014),
-+	REG(SYS_COUNT_RX_JABBERS,		0x000018),
-+	REG(SYS_COUNT_RX_64,			0x000024),
-+	REG(SYS_COUNT_RX_65_127,		0x000028),
-+	REG(SYS_COUNT_RX_128_255,		0x00002c),
-+	REG(SYS_COUNT_RX_256_1023,		0x000030),
-+	REG(SYS_COUNT_RX_1024_1526,		0x000034),
-+	REG(SYS_COUNT_RX_1527_MAX,		0x000038),
-+	REG(SYS_COUNT_RX_LONGS,			0x000044),
-+	REG(SYS_COUNT_TX_OCTETS,		0x000200),
-+	REG(SYS_COUNT_TX_COLLISION,		0x000210),
-+	REG(SYS_COUNT_TX_DROPS,			0x000214),
-+	REG(SYS_COUNT_TX_64,			0x00021c),
-+	REG(SYS_COUNT_TX_65_127,		0x000220),
-+	REG(SYS_COUNT_TX_128_511,		0x000224),
-+	REG(SYS_COUNT_TX_512_1023,		0x000228),
-+	REG(SYS_COUNT_TX_1024_1526,		0x00022c),
-+	REG(SYS_COUNT_TX_1527_MAX,		0x000230),
-+	REG(SYS_COUNT_TX_AGING,			0x000278),
-+	REG(SYS_RESET_CFG,			0x000e00),
-+	REG(SYS_SR_ETYPE_CFG,			0x000e04),
-+	REG(SYS_VLAN_ETYPE_CFG,			0x000e08),
-+	REG(SYS_PORT_MODE,			0x000e0c),
-+	REG(SYS_FRONT_PORT_MODE,		0x000e2c),
-+	REG(SYS_FRM_AGING,			0x000e44),
-+	REG(SYS_STAT_CFG,			0x000e48),
-+	REG(SYS_SW_STATUS,			0x000e4c),
-+	REG_RESERVED(SYS_MISC_CFG),
-+	REG(SYS_REW_MAC_HIGH_CFG,		0x000e6c),
-+	REG(SYS_REW_MAC_LOW_CFG,		0x000e84),
-+	REG(SYS_TIMESTAMP_OFFSET,		0x000e9c),
-+	REG(SYS_PAUSE_CFG,			0x000ea0),
-+	REG(SYS_PAUSE_TOT_CFG,			0x000ebc),
-+	REG(SYS_ATOP,				0x000ec0),
-+	REG(SYS_ATOP_TOT_CFG,			0x000edc),
-+	REG(SYS_MAC_FC_CFG,			0x000ee0),
-+	REG(SYS_MMGT,				0x000ef8),
-+	REG_RESERVED(SYS_MMGT_FAST),
-+	REG_RESERVED(SYS_EVENTS_DIF),
-+	REG_RESERVED(SYS_EVENTS_CORE),
-+	REG_RESERVED(SYS_CNT),
-+	REG(SYS_PTP_STATUS,			0x000f14),
-+	REG(SYS_PTP_TXSTAMP,			0x000f18),
-+	REG(SYS_PTP_NXT,			0x000f1c),
-+	REG(SYS_PTP_CFG,			0x000f20),
-+	REG(SYS_RAM_INIT,			0x000f24),
-+	REG_RESERVED(SYS_CM_ADDR),
-+	REG_RESERVED(SYS_CM_DATA_WR),
-+	REG_RESERVED(SYS_CM_DATA_RD),
-+	REG_RESERVED(SYS_CM_OP),
-+	REG_RESERVED(SYS_CM_DATA),
-+};
-+
-+static const u32 vsc9959_gcb_regmap[] = {
-+	REG(GCB_SOFT_RST,			0x000004),
-+};
-+
-+static const u32 *vsc9959_regmap[] = {
-+	[ANA]	= vsc9959_ana_regmap,
-+	[QS]	= vsc9959_qs_regmap,
-+	[QSYS]	= vsc9959_qsys_regmap,
-+	[REW]	= vsc9959_rew_regmap,
-+	[SYS]	= vsc9959_sys_regmap,
-+	[S2]	= vsc9959_s2_regmap,
-+	[GCB]	= vsc9959_gcb_regmap,
-+};
-+
-+/* Addresses are relative to the PCI device's base address and
-+ * will be fixed up at ioremap time.
-+ */
-+static struct resource vsc9959_target_io_res[] = {
-+	[ANA] = {
-+		.start	= 0x0280000,
-+		.end	= 0x028ffff,
-+		.name	= "ana",
-+	},
-+	[QS] = {
-+		.start	= 0x0080000,
-+		.end	= 0x00800ff,
-+		.name	= "qs",
-+	},
-+	[QSYS] = {
-+		.start	= 0x0200000,
-+		.end	= 0x021ffff,
-+		.name	= "qsys",
-+	},
-+	[REW] = {
-+		.start	= 0x0030000,
-+		.end	= 0x003ffff,
-+		.name	= "rew",
-+	},
-+	[SYS] = {
-+		.start	= 0x0010000,
-+		.end	= 0x001ffff,
-+		.name	= "sys",
-+	},
-+	[S2] = {
-+		.start	= 0x0060000,
-+		.end	= 0x00603ff,
-+		.name	= "s2",
-+	},
-+	[GCB] = {
-+		.start	= 0x0070000,
-+		.end	= 0x00701ff,
-+		.name	= "devcpu_gcb",
-+	},
-+};
-+
-+static struct resource vsc9959_port_io_res[] = {
-+	{
-+		.start	= 0x0100000,
-+		.end	= 0x010ffff,
-+		.name	= "port0",
-+	},
-+	{
-+		.start	= 0x0110000,
-+		.end	= 0x011ffff,
-+		.name	= "port1",
-+	},
-+	{
-+		.start	= 0x0120000,
-+		.end	= 0x012ffff,
-+		.name	= "port2",
-+	},
-+	{
-+		.start	= 0x0130000,
-+		.end	= 0x013ffff,
-+		.name	= "port3",
-+	},
-+	{
-+		.start	= 0x0140000,
-+		.end	= 0x014ffff,
-+		.name	= "port4",
-+	},
-+	{
-+		.start	= 0x0150000,
-+		.end	= 0x015ffff,
-+		.name	= "port5",
-+	},
-+};
-+
-+static const struct reg_field vsc9959_regfields[] = {
-+	[ANA_ADVLEARN_VLAN_CHK] = REG_FIELD(ANA_ADVLEARN, 6, 6),
-+	[ANA_ADVLEARN_LEARN_MIRROR] = REG_FIELD(ANA_ADVLEARN, 0, 5),
-+	[ANA_ANEVENTS_FLOOD_DISCARD] = REG_FIELD(ANA_ANEVENTS, 30, 30),
-+	[ANA_ANEVENTS_AUTOAGE] = REG_FIELD(ANA_ANEVENTS, 26, 26),
-+	[ANA_ANEVENTS_STORM_DROP] = REG_FIELD(ANA_ANEVENTS, 24, 24),
-+	[ANA_ANEVENTS_LEARN_DROP] = REG_FIELD(ANA_ANEVENTS, 23, 23),
-+	[ANA_ANEVENTS_AGED_ENTRY] = REG_FIELD(ANA_ANEVENTS, 22, 22),
-+	[ANA_ANEVENTS_CPU_LEARN_FAILED] = REG_FIELD(ANA_ANEVENTS, 21, 21),
-+	[ANA_ANEVENTS_AUTO_LEARN_FAILED] = REG_FIELD(ANA_ANEVENTS, 20, 20),
-+	[ANA_ANEVENTS_LEARN_REMOVE] = REG_FIELD(ANA_ANEVENTS, 19, 19),
-+	[ANA_ANEVENTS_AUTO_LEARNED] = REG_FIELD(ANA_ANEVENTS, 18, 18),
-+	[ANA_ANEVENTS_AUTO_MOVED] = REG_FIELD(ANA_ANEVENTS, 17, 17),
-+	[ANA_ANEVENTS_CLASSIFIED_DROP] = REG_FIELD(ANA_ANEVENTS, 15, 15),
-+	[ANA_ANEVENTS_CLASSIFIED_COPY] = REG_FIELD(ANA_ANEVENTS, 14, 14),
-+	[ANA_ANEVENTS_VLAN_DISCARD] = REG_FIELD(ANA_ANEVENTS, 13, 13),
-+	[ANA_ANEVENTS_FWD_DISCARD] = REG_FIELD(ANA_ANEVENTS, 12, 12),
-+	[ANA_ANEVENTS_MULTICAST_FLOOD] = REG_FIELD(ANA_ANEVENTS, 11, 11),
-+	[ANA_ANEVENTS_UNICAST_FLOOD] = REG_FIELD(ANA_ANEVENTS, 10, 10),
-+	[ANA_ANEVENTS_DEST_KNOWN] = REG_FIELD(ANA_ANEVENTS, 9, 9),
-+	[ANA_ANEVENTS_BUCKET3_MATCH] = REG_FIELD(ANA_ANEVENTS, 8, 8),
-+	[ANA_ANEVENTS_BUCKET2_MATCH] = REG_FIELD(ANA_ANEVENTS, 7, 7),
-+	[ANA_ANEVENTS_BUCKET1_MATCH] = REG_FIELD(ANA_ANEVENTS, 6, 6),
-+	[ANA_ANEVENTS_BUCKET0_MATCH] = REG_FIELD(ANA_ANEVENTS, 5, 5),
-+	[ANA_ANEVENTS_CPU_OPERATION] = REG_FIELD(ANA_ANEVENTS, 4, 4),
-+	[ANA_ANEVENTS_DMAC_LOOKUP] = REG_FIELD(ANA_ANEVENTS, 3, 3),
-+	[ANA_ANEVENTS_SMAC_LOOKUP] = REG_FIELD(ANA_ANEVENTS, 2, 2),
-+	[ANA_ANEVENTS_SEQ_GEN_ERR_0] = REG_FIELD(ANA_ANEVENTS, 1, 1),
-+	[ANA_ANEVENTS_SEQ_GEN_ERR_1] = REG_FIELD(ANA_ANEVENTS, 0, 0),
-+	[ANA_TABLES_MACACCESS_B_DOM] = REG_FIELD(ANA_TABLES_MACACCESS, 16, 16),
-+	[ANA_TABLES_MACTINDX_BUCKET] = REG_FIELD(ANA_TABLES_MACTINDX, 11, 12),
-+	[ANA_TABLES_MACTINDX_M_INDEX] = REG_FIELD(ANA_TABLES_MACTINDX, 0, 10),
-+	[SYS_RESET_CFG_CORE_ENA] = REG_FIELD(SYS_RESET_CFG, 0, 0),
-+	[GCB_SOFT_RST_SWC_RST] = REG_FIELD(GCB_SOFT_RST, 0, 0),
-+};
-+
-+static const struct ocelot_stat_layout vsc9959_stats_layout[] = {
-+	{ .offset = 0x00,	.name = "rx_octets", },
-+	{ .offset = 0x01,	.name = "rx_unicast", },
-+	{ .offset = 0x02,	.name = "rx_multicast", },
-+	{ .offset = 0x03,	.name = "rx_broadcast", },
-+	{ .offset = 0x04,	.name = "rx_shorts", },
-+	{ .offset = 0x05,	.name = "rx_fragments", },
-+	{ .offset = 0x06,	.name = "rx_jabbers", },
-+	{ .offset = 0x07,	.name = "rx_crc_align_errs", },
-+	{ .offset = 0x08,	.name = "rx_sym_errs", },
-+	{ .offset = 0x09,	.name = "rx_frames_below_65_octets", },
-+	{ .offset = 0x0A,	.name = "rx_frames_65_to_127_octets", },
-+	{ .offset = 0x0B,	.name = "rx_frames_128_to_255_octets", },
-+	{ .offset = 0x0C,	.name = "rx_frames_256_to_511_octets", },
-+	{ .offset = 0x0D,	.name = "rx_frames_512_to_1023_octets", },
-+	{ .offset = 0x0E,	.name = "rx_frames_1024_to_1526_octets", },
-+	{ .offset = 0x0F,	.name = "rx_frames_over_1526_octets", },
-+	{ .offset = 0x10,	.name = "rx_pause", },
-+	{ .offset = 0x11,	.name = "rx_control", },
-+	{ .offset = 0x12,	.name = "rx_longs", },
-+	{ .offset = 0x13,	.name = "rx_classified_drops", },
-+	{ .offset = 0x14,	.name = "rx_red_prio_0", },
-+	{ .offset = 0x15,	.name = "rx_red_prio_1", },
-+	{ .offset = 0x16,	.name = "rx_red_prio_2", },
-+	{ .offset = 0x17,	.name = "rx_red_prio_3", },
-+	{ .offset = 0x18,	.name = "rx_red_prio_4", },
-+	{ .offset = 0x19,	.name = "rx_red_prio_5", },
-+	{ .offset = 0x1A,	.name = "rx_red_prio_6", },
-+	{ .offset = 0x1B,	.name = "rx_red_prio_7", },
-+	{ .offset = 0x1C,	.name = "rx_yellow_prio_0", },
-+	{ .offset = 0x1D,	.name = "rx_yellow_prio_1", },
-+	{ .offset = 0x1E,	.name = "rx_yellow_prio_2", },
-+	{ .offset = 0x1F,	.name = "rx_yellow_prio_3", },
-+	{ .offset = 0x20,	.name = "rx_yellow_prio_4", },
-+	{ .offset = 0x21,	.name = "rx_yellow_prio_5", },
-+	{ .offset = 0x22,	.name = "rx_yellow_prio_6", },
-+	{ .offset = 0x23,	.name = "rx_yellow_prio_7", },
-+	{ .offset = 0x24,	.name = "rx_green_prio_0", },
-+	{ .offset = 0x25,	.name = "rx_green_prio_1", },
-+	{ .offset = 0x26,	.name = "rx_green_prio_2", },
-+	{ .offset = 0x27,	.name = "rx_green_prio_3", },
-+	{ .offset = 0x28,	.name = "rx_green_prio_4", },
-+	{ .offset = 0x29,	.name = "rx_green_prio_5", },
-+	{ .offset = 0x2A,	.name = "rx_green_prio_6", },
-+	{ .offset = 0x2B,	.name = "rx_green_prio_7", },
-+	{ .offset = 0x80,	.name = "tx_octets", },
-+	{ .offset = 0x81,	.name = "tx_unicast", },
-+	{ .offset = 0x82,	.name = "tx_multicast", },
-+	{ .offset = 0x83,	.name = "tx_broadcast", },
-+	{ .offset = 0x84,	.name = "tx_collision", },
-+	{ .offset = 0x85,	.name = "tx_drops", },
-+	{ .offset = 0x86,	.name = "tx_pause", },
-+	{ .offset = 0x87,	.name = "tx_frames_below_65_octets", },
-+	{ .offset = 0x88,	.name = "tx_frames_65_to_127_octets", },
-+	{ .offset = 0x89,	.name = "tx_frames_128_255_octets", },
-+	{ .offset = 0x8B,	.name = "tx_frames_256_511_octets", },
-+	{ .offset = 0x8C,	.name = "tx_frames_1024_1526_octets", },
-+	{ .offset = 0x8D,	.name = "tx_frames_over_1526_octets", },
-+	{ .offset = 0x8E,	.name = "tx_yellow_prio_0", },
-+	{ .offset = 0x8F,	.name = "tx_yellow_prio_1", },
-+	{ .offset = 0x90,	.name = "tx_yellow_prio_2", },
-+	{ .offset = 0x91,	.name = "tx_yellow_prio_3", },
-+	{ .offset = 0x92,	.name = "tx_yellow_prio_4", },
-+	{ .offset = 0x93,	.name = "tx_yellow_prio_5", },
-+	{ .offset = 0x94,	.name = "tx_yellow_prio_6", },
-+	{ .offset = 0x95,	.name = "tx_yellow_prio_7", },
-+	{ .offset = 0x96,	.name = "tx_green_prio_0", },
-+	{ .offset = 0x97,	.name = "tx_green_prio_1", },
-+	{ .offset = 0x98,	.name = "tx_green_prio_2", },
-+	{ .offset = 0x99,	.name = "tx_green_prio_3", },
-+	{ .offset = 0x9A,	.name = "tx_green_prio_4", },
-+	{ .offset = 0x9B,	.name = "tx_green_prio_5", },
-+	{ .offset = 0x9C,	.name = "tx_green_prio_6", },
-+	{ .offset = 0x9D,	.name = "tx_green_prio_7", },
-+	{ .offset = 0x9E,	.name = "tx_aged", },
-+	{ .offset = 0x100,	.name = "drop_local", },
-+	{ .offset = 0x101,	.name = "drop_tail", },
-+	{ .offset = 0x102,	.name = "drop_yellow_prio_0", },
-+	{ .offset = 0x103,	.name = "drop_yellow_prio_1", },
-+	{ .offset = 0x104,	.name = "drop_yellow_prio_2", },
-+	{ .offset = 0x105,	.name = "drop_yellow_prio_3", },
-+	{ .offset = 0x106,	.name = "drop_yellow_prio_4", },
-+	{ .offset = 0x107,	.name = "drop_yellow_prio_5", },
-+	{ .offset = 0x108,	.name = "drop_yellow_prio_6", },
-+	{ .offset = 0x109,	.name = "drop_yellow_prio_7", },
-+	{ .offset = 0x10A,	.name = "drop_green_prio_0", },
-+	{ .offset = 0x10B,	.name = "drop_green_prio_1", },
-+	{ .offset = 0x10C,	.name = "drop_green_prio_2", },
-+	{ .offset = 0x10D,	.name = "drop_green_prio_3", },
-+	{ .offset = 0x10E,	.name = "drop_green_prio_4", },
-+	{ .offset = 0x10F,	.name = "drop_green_prio_5", },
-+	{ .offset = 0x110,	.name = "drop_green_prio_6", },
-+	{ .offset = 0x111,	.name = "drop_green_prio_7", },
-+};
-+
-+#define VSC9959_INIT_TIMEOUT			50000
-+#define VSC9959_GCB_RST_SLEEP			100
-+#define VSC9959_SYS_RAMINIT_SLEEP		80
-+
-+static int vsc9959_gcb_soft_rst_status(struct ocelot *ocelot)
-+{
-+	int val;
-+
-+	regmap_field_read(ocelot->regfields[GCB_SOFT_RST_SWC_RST], &val);
-+
-+	return val;
-+}
-+
-+static int vsc9959_sys_ram_init_status(struct ocelot *ocelot)
-+{
-+	return ocelot_read(ocelot, SYS_RAM_INIT);
-+}
-+
-+static int vsc9959_reset(struct ocelot *ocelot)
-+{
-+	int val, err;
-+
-+	/* soft-reset the switch core */
-+	regmap_field_write(ocelot->regfields[GCB_SOFT_RST_SWC_RST], 1);
-+
-+	err = readx_poll_timeout(vsc9959_gcb_soft_rst_status, ocelot, val, !val,
-+				 VSC9959_GCB_RST_SLEEP, VSC9959_INIT_TIMEOUT);
-+	if (err) {
-+		dev_err(ocelot->dev, "timeout: switch core reset\n");
-+		return err;
-+	}
-+
-+	/* initialize switch mem ~40us */
-+	ocelot_write(ocelot, SYS_RAM_INIT_RAM_INIT, SYS_RAM_INIT);
-+	err = readx_poll_timeout(vsc9959_sys_ram_init_status, ocelot, val, !val,
-+				 VSC9959_SYS_RAMINIT_SLEEP,
-+				 VSC9959_INIT_TIMEOUT);
-+	if (err) {
-+		dev_err(ocelot->dev, "timeout: switch sram init\n");
-+		return err;
-+	}
-+
-+	/* enable switch core */
-+	regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
-+
-+	return 0;
-+}
-+
-+static const struct ocelot_ops vsc9959_ops = {
-+	.reset			= vsc9959_reset,
-+};
-+
-+struct felix_info felix_info_vsc9959 = {
-+	.target_io_res		= vsc9959_target_io_res,
-+	.port_io_res		= vsc9959_port_io_res,
-+	.regfields		= vsc9959_regfields,
-+	.map			= vsc9959_regmap,
-+	.ops			= &vsc9959_ops,
-+	.stats_layout		= vsc9959_stats_layout,
-+	.num_stats		= ARRAY_SIZE(vsc9959_stats_layout),
-+	.shared_queue_sz	= 128 * 1024,
-+	.num_ports		= 6,
-+	.pci_bar		= 4,
-+};
diff --git a/target/linux/layerscape/patches-5.4/701-net-0264-net-dsa-felix-Fix-CPU-port-assignment-when-not-last-.patch b/target/linux/layerscape/patches-5.4/701-net-0264-net-dsa-felix-Fix-CPU-port-assignment-when-not-last-.patch
deleted file mode 100644
index 972ec164f1..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0264-net-dsa-felix-Fix-CPU-port-assignment-when-not-last-.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 93a32fc4f43ae40a2140acd9258faada11a98ec0 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Mon, 18 Nov 2019 20:16:57 +0200
-Subject: [PATCH] net: dsa: felix: Fix CPU port assignment when not last port
-
-On the NXP LS1028A, there are 2 Ethernet links between the Felix switch
-and the ENETC:
-- eno2 <-> swp4, at 2.5G
-- eno3 <-> swp5, at 1G
-
-Only one of the above Ethernet port pairs can act as a DSA link for
-tagging.
-
-When adding initial support for the driver, it was tested only on the 1G
-eno3 <-> swp5 interface, due to the necessity of using PHYLIB initially
-(which treats fixed-link interfaces as emulated C22 PHYs, so it doesn't
-support fixed-link speeds higher than 1G).
-
-After making PHYLINK work, it appears that swp4 still can't act as CPU
-port. So it looks like ocelot_set_cpu_port was being called for swp4,
-but then it was called again for swp5, overwriting the CPU port assigned
-in the DT.
-
-It appears that when you call dsa_upstream_port for a port that is not
-defined in the device tree (such as swp5 when using swp4 as CPU port),
-its dp->cpu_dp pointer is not initialized by dsa_tree_setup_default_cpu,
-and this trips up the following condition in dsa_upstream_port:
-
-	if (!cpu_dp)
-		return port;
-
-So the moral of the story is: don't call dsa_upstream_port for a port
-that is not defined in the device tree, and therefore its dsa_port
-structure is not completely initialized (ds->num_ports is still 6).
-
-Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/ocelot/felix.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/dsa/ocelot/felix.c
-+++ b/drivers/net/dsa/ocelot/felix.c
-@@ -286,7 +286,7 @@ static int felix_setup(struct dsa_switch
- 	for (port = 0; port < ds->num_ports; port++) {
- 		ocelot_init_port(ocelot, port);
- 
--		if (port == dsa_upstream_port(ds, port))
-+		if (dsa_is_cpu_port(ds, port))
- 			ocelot_set_cpu_port(ocelot, port,
- 					    OCELOT_TAG_PREFIX_NONE,
- 					    OCELOT_TAG_PREFIX_LONG);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0265-net-mscc-ocelot-export-ocelot_hwstamp_get-set-functi.patch b/target/linux/layerscape/patches-5.4/701-net-0265-net-mscc-ocelot-export-ocelot_hwstamp_get-set-functi.patch
deleted file mode 100644
index d6b4e2bc13..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0265-net-mscc-ocelot-export-ocelot_hwstamp_get-set-functi.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 1f7c79cacbb448420929fc3b5261b9616b5d8f6d Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Wed, 20 Nov 2019 16:23:14 +0800
-Subject: [PATCH] net: mscc: ocelot: export ocelot_hwstamp_get/set functions
-
-Export ocelot_hwstamp_get/set functions so that DSA driver
-is able to reuse them.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 8 ++++----
- include/soc/mscc/ocelot.h          | 2 ++
- 2 files changed, 6 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -1049,15 +1049,14 @@ static int ocelot_get_port_parent_id(str
- 	return 0;
- }
- 
--static int ocelot_hwstamp_get(struct ocelot *ocelot, int port,
--			      struct ifreq *ifr)
-+int ocelot_hwstamp_get(struct ocelot *ocelot, int port, struct ifreq *ifr)
- {
- 	return copy_to_user(ifr->ifr_data, &ocelot->hwtstamp_config,
- 			    sizeof(ocelot->hwtstamp_config)) ? -EFAULT : 0;
- }
-+EXPORT_SYMBOL(ocelot_hwstamp_get);
- 
--static int ocelot_hwstamp_set(struct ocelot *ocelot, int port,
--			      struct ifreq *ifr)
-+int ocelot_hwstamp_set(struct ocelot *ocelot, int port, struct ifreq *ifr)
- {
- 	struct ocelot_port *ocelot_port = ocelot->ports[port];
- 	struct hwtstamp_config cfg;
-@@ -1114,6 +1113,7 @@ static int ocelot_hwstamp_set(struct oce
- 
- 	return copy_to_user(ifr->ifr_data, &cfg, sizeof(cfg)) ? -EFAULT : 0;
- }
-+EXPORT_SYMBOL(ocelot_hwstamp_set);
- 
- static int ocelot_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
- {
---- a/include/soc/mscc/ocelot.h
-+++ b/include/soc/mscc/ocelot.h
-@@ -533,6 +533,8 @@ int ocelot_fdb_del(struct ocelot *ocelot
- int ocelot_vlan_add(struct ocelot *ocelot, int port, u16 vid, bool pvid,
- 		    bool untagged);
- int ocelot_vlan_del(struct ocelot *ocelot, int port, u16 vid);
-+int ocelot_hwstamp_get(struct ocelot *ocelot, int port, struct ifreq *ifr);
-+int ocelot_hwstamp_set(struct ocelot *ocelot, int port, struct ifreq *ifr);
- int ocelot_ptp_gettime64(struct ptp_clock_info *ptp, struct timespec64 *ts);
- void ocelot_get_hwtimestamp(struct ocelot *ocelot, struct timespec64 *ts);
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0266-net-mscc-ocelot-convert-to-use-ocelot_get_txtstamp.patch b/target/linux/layerscape/patches-5.4/701-net-0266-net-mscc-ocelot-convert-to-use-ocelot_get_txtstamp.patch
deleted file mode 100644
index 31469bdb3c..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0266-net-mscc-ocelot-convert-to-use-ocelot_get_txtstamp.patch
+++ /dev/null
@@ -1,202 +0,0 @@
-From dd8b8f6baf4917124ed268022f7ce4a08d35cc89 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Wed, 20 Nov 2019 16:23:15 +0800
-Subject: [PATCH] net: mscc: ocelot: convert to use ocelot_get_txtstamp()
-
-The method getting TX timestamp by reading timestamp FIFO and
-matching skbs list is common for DSA Felix driver too.
-So move code out of ocelot_board.c, convert to use
-ocelot_get_txtstamp() function and export it.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c       | 62 ++++++++++++++++++++++++++++++--
- drivers/net/ethernet/mscc/ocelot.h       |  6 ----
- drivers/net/ethernet/mscc/ocelot_board.c | 53 +--------------------------
- include/soc/mscc/ocelot.h                |  9 ++++-
- 4 files changed, 69 insertions(+), 61 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -661,7 +661,8 @@ out:
- 	return NETDEV_TX_OK;
- }
- 
--void ocelot_get_hwtimestamp(struct ocelot *ocelot, struct timespec64 *ts)
-+static void ocelot_get_hwtimestamp(struct ocelot *ocelot,
-+				   struct timespec64 *ts)
- {
- 	unsigned long flags;
- 	u32 val;
-@@ -686,7 +687,64 @@ void ocelot_get_hwtimestamp(struct ocelo
- 
- 	spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
- }
--EXPORT_SYMBOL(ocelot_get_hwtimestamp);
-+
-+void ocelot_get_txtstamp(struct ocelot *ocelot)
-+{
-+	int budget = OCELOT_PTP_QUEUE_SZ;
-+
-+	while (budget--) {
-+		struct skb_shared_hwtstamps shhwtstamps;
-+		struct list_head *pos, *tmp;
-+		struct sk_buff *skb = NULL;
-+		struct ocelot_skb *entry;
-+		struct ocelot_port *port;
-+		struct timespec64 ts;
-+		u32 val, id, txport;
-+
-+		val = ocelot_read(ocelot, SYS_PTP_STATUS);
-+
-+		/* Check if a timestamp can be retrieved */
-+		if (!(val & SYS_PTP_STATUS_PTP_MESS_VLD))
-+			break;
-+
-+		WARN_ON(val & SYS_PTP_STATUS_PTP_OVFL);
-+
-+		/* Retrieve the ts ID and Tx port */
-+		id = SYS_PTP_STATUS_PTP_MESS_ID_X(val);
-+		txport = SYS_PTP_STATUS_PTP_MESS_TXPORT_X(val);
-+
-+		/* Retrieve its associated skb */
-+		port = ocelot->ports[txport];
-+
-+		list_for_each_safe(pos, tmp, &port->skbs) {
-+			entry = list_entry(pos, struct ocelot_skb, head);
-+			if (entry->id != id)
-+				continue;
-+
-+			skb = entry->skb;
-+
-+			list_del(pos);
-+			kfree(entry);
-+		}
-+
-+		/* Next ts */
-+		ocelot_write(ocelot, SYS_PTP_NXT_PTP_NXT, SYS_PTP_NXT);
-+
-+		if (unlikely(!skb))
-+			continue;
-+
-+		/* Get the h/w timestamp */
-+		ocelot_get_hwtimestamp(ocelot, &ts);
-+
-+		/* Set the timestamp into the skb */
-+		memset(&shhwtstamps, 0, sizeof(shhwtstamps));
-+		shhwtstamps.hwtstamp = ktime_set(ts.tv_sec, ts.tv_nsec);
-+		skb_tstamp_tx(skb, &shhwtstamps);
-+
-+		dev_kfree_skb_any(skb);
-+	}
-+}
-+EXPORT_SYMBOL(ocelot_get_txtstamp);
- 
- static int ocelot_mc_unsync(struct net_device *dev, const unsigned char *addr)
- {
---- a/drivers/net/ethernet/mscc/ocelot.h
-+++ b/drivers/net/ethernet/mscc/ocelot.h
-@@ -74,12 +74,6 @@ struct ocelot_port_private {
- 	struct ocelot_port_tc tc;
- };
- 
--struct ocelot_skb {
--	struct list_head head;
--	struct sk_buff *skb;
--	u8 id;
--};
--
- u32 ocelot_port_readl(struct ocelot_port *port, u32 reg);
- void ocelot_port_writel(struct ocelot_port *port, u32 val, u32 reg);
- 
---- a/drivers/net/ethernet/mscc/ocelot_board.c
-+++ b/drivers/net/ethernet/mscc/ocelot_board.c
-@@ -198,60 +198,9 @@ static irqreturn_t ocelot_xtr_irq_handle
- 
- static irqreturn_t ocelot_ptp_rdy_irq_handler(int irq, void *arg)
- {
--	int budget = OCELOT_PTP_QUEUE_SZ;
- 	struct ocelot *ocelot = arg;
- 
--	while (budget--) {
--		struct skb_shared_hwtstamps shhwtstamps;
--		struct list_head *pos, *tmp;
--		struct sk_buff *skb = NULL;
--		struct ocelot_skb *entry;
--		struct ocelot_port *port;
--		struct timespec64 ts;
--		u32 val, id, txport;
--
--		val = ocelot_read(ocelot, SYS_PTP_STATUS);
--
--		/* Check if a timestamp can be retrieved */
--		if (!(val & SYS_PTP_STATUS_PTP_MESS_VLD))
--			break;
--
--		WARN_ON(val & SYS_PTP_STATUS_PTP_OVFL);
--
--		/* Retrieve the ts ID and Tx port */
--		id = SYS_PTP_STATUS_PTP_MESS_ID_X(val);
--		txport = SYS_PTP_STATUS_PTP_MESS_TXPORT_X(val);
--
--		/* Retrieve its associated skb */
--		port = ocelot->ports[txport];
--
--		list_for_each_safe(pos, tmp, &port->skbs) {
--			entry = list_entry(pos, struct ocelot_skb, head);
--			if (entry->id != id)
--				continue;
--
--			skb = entry->skb;
--
--			list_del(pos);
--			kfree(entry);
--		}
--
--		/* Next ts */
--		ocelot_write(ocelot, SYS_PTP_NXT_PTP_NXT, SYS_PTP_NXT);
--
--		if (unlikely(!skb))
--			continue;
--
--		/* Get the h/w timestamp */
--		ocelot_get_hwtimestamp(ocelot, &ts);
--
--		/* Set the timestamp into the skb */
--		memset(&shhwtstamps, 0, sizeof(shhwtstamps));
--		shhwtstamps.hwtstamp = ktime_set(ts.tv_sec, ts.tv_nsec);
--		skb_tstamp_tx(skb, &shhwtstamps);
--
--		dev_kfree_skb_any(skb);
--	}
-+	ocelot_get_txtstamp(ocelot);
- 
- 	return IRQ_HANDLED;
- }
---- a/include/soc/mscc/ocelot.h
-+++ b/include/soc/mscc/ocelot.h
-@@ -406,6 +406,13 @@ struct ocelot_ops {
- 	int (*reset)(struct ocelot *ocelot);
- };
- 
-+struct ocelot_skb {
-+	struct list_head head;
-+	struct sk_buff *skb;
-+	u8 id;
-+};
-+
-+
- struct ocelot_port {
- 	struct ocelot			*ocelot;
- 
-@@ -536,6 +543,6 @@ int ocelot_vlan_del(struct ocelot *ocelo
- int ocelot_hwstamp_get(struct ocelot *ocelot, int port, struct ifreq *ifr);
- int ocelot_hwstamp_set(struct ocelot *ocelot, int port, struct ifreq *ifr);
- int ocelot_ptp_gettime64(struct ptp_clock_info *ptp, struct timespec64 *ts);
--void ocelot_get_hwtimestamp(struct ocelot *ocelot, struct timespec64 *ts);
-+void ocelot_get_txtstamp(struct ocelot *ocelot);
- 
- #endif
diff --git a/target/linux/layerscape/patches-5.4/701-net-0267-net-mscc-ocelot-convert-to-use-ocelot_port_add_txtst.patch b/target/linux/layerscape/patches-5.4/701-net-0267-net-mscc-ocelot-convert-to-use-ocelot_port_add_txtst.patch
deleted file mode 100644
index 988c90e79d..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0267-net-mscc-ocelot-convert-to-use-ocelot_port_add_txtst.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From c0c92f8d9a093faf64397b1874f074e071a5b4e2 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Wed, 20 Nov 2019 16:23:16 +0800
-Subject: [PATCH] net: mscc: ocelot: convert to use
- ocelot_port_add_txtstamp_skb()
-
-Convert to use ocelot_port_add_txtstamp_skb() for adding skbs which
-require TX timestamp into list. Export it so that DSA Felix driver
-could reuse it too.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 43 ++++++++++++++++++++++++--------------
- include/soc/mscc/ocelot.h          |  2 ++
- 2 files changed, 29 insertions(+), 16 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -575,6 +575,32 @@ static int ocelot_gen_ifh(u32 *ifh, stru
- 	return 0;
- }
- 
-+int ocelot_port_add_txtstamp_skb(struct ocelot_port *ocelot_port,
-+				 struct sk_buff *skb)
-+{
-+	struct skb_shared_info *shinfo = skb_shinfo(skb);
-+	struct ocelot *ocelot = ocelot_port->ocelot;
-+
-+	if (ocelot->ptp && shinfo->tx_flags & SKBTX_HW_TSTAMP &&
-+	    ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP) {
-+		struct ocelot_skb *oskb =
-+			kzalloc(sizeof(struct ocelot_skb), GFP_ATOMIC);
-+
-+		if (unlikely(!oskb))
-+			return -ENOMEM;
-+
-+		shinfo->tx_flags |= SKBTX_IN_PROGRESS;
-+
-+		oskb->skb = skb;
-+		oskb->id = ocelot_port->ts_id % 4;
-+
-+		list_add_tail(&oskb->head, &ocelot_port->skbs);
-+		return 0;
-+	}
-+	return -ENODATA;
-+}
-+EXPORT_SYMBOL(ocelot_port_add_txtstamp_skb);
-+
- static int ocelot_port_xmit(struct sk_buff *skb, struct net_device *dev)
- {
- 	struct ocelot_port_private *priv = netdev_priv(dev);
-@@ -637,26 +663,11 @@ static int ocelot_port_xmit(struct sk_bu
- 	dev->stats.tx_packets++;
- 	dev->stats.tx_bytes += skb->len;
- 
--	if (ocelot->ptp && shinfo->tx_flags & SKBTX_HW_TSTAMP &&
--	    ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP) {
--		struct ocelot_skb *oskb =
--			kzalloc(sizeof(struct ocelot_skb), GFP_ATOMIC);
--
--		if (unlikely(!oskb))
--			goto out;
--
--		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
--
--		oskb->skb = skb;
--		oskb->id = ocelot_port->ts_id % 4;
-+	if (!ocelot_port_add_txtstamp_skb(ocelot_port, skb)) {
- 		ocelot_port->ts_id++;
--
--		list_add_tail(&oskb->head, &ocelot_port->skbs);
--
- 		return NETDEV_TX_OK;
- 	}
- 
--out:
- 	dev_kfree_skb_any(skb);
- 	return NETDEV_TX_OK;
- }
---- a/include/soc/mscc/ocelot.h
-+++ b/include/soc/mscc/ocelot.h
-@@ -543,6 +543,8 @@ int ocelot_vlan_del(struct ocelot *ocelo
- int ocelot_hwstamp_get(struct ocelot *ocelot, int port, struct ifreq *ifr);
- int ocelot_hwstamp_set(struct ocelot *ocelot, int port, struct ifreq *ifr);
- int ocelot_ptp_gettime64(struct ptp_clock_info *ptp, struct timespec64 *ts);
-+int ocelot_port_add_txtstamp_skb(struct ocelot_port *ocelot_port,
-+				 struct sk_buff *skb);
- void ocelot_get_txtstamp(struct ocelot *ocelot);
- 
- #endif
diff --git a/target/linux/layerscape/patches-5.4/701-net-0268-net-dsa-ocelot-define-PTP-registers-for-felix_vsc995.patch b/target/linux/layerscape/patches-5.4/701-net-0268-net-dsa-ocelot-define-PTP-registers-for-felix_vsc995.patch
deleted file mode 100644
index c3f9263cf1..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0268-net-dsa-ocelot-define-PTP-registers-for-felix_vsc995.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From bd8d12b3bc7b5d63132a6d5da0890c6fc3bcad7e Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Wed, 20 Nov 2019 16:23:17 +0800
-Subject: [PATCH] net: dsa: ocelot: define PTP registers for felix_vsc9959
-
-This patch is to define PTP registers for felix_vsc9959.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/ocelot/felix_vsc9959.c | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/drivers/net/dsa/ocelot/felix_vsc9959.c
-+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
-@@ -282,6 +282,16 @@ static const u32 vsc9959_sys_regmap[] =
- 	REG_RESERVED(SYS_CM_DATA),
- };
- 
-+static const u32 vsc9959_ptp_regmap[] = {
-+	REG(PTP_PIN_CFG,                   0x000000),
-+	REG(PTP_PIN_TOD_SEC_MSB,           0x000004),
-+	REG(PTP_PIN_TOD_SEC_LSB,           0x000008),
-+	REG(PTP_PIN_TOD_NSEC,              0x00000c),
-+	REG(PTP_CFG_MISC,                  0x0000a0),
-+	REG(PTP_CLK_CFG_ADJ_CFG,           0x0000a4),
-+	REG(PTP_CLK_CFG_ADJ_FREQ,          0x0000a8),
-+};
-+
- static const u32 vsc9959_gcb_regmap[] = {
- 	REG(GCB_SOFT_RST,			0x000004),
- };
-@@ -293,6 +303,7 @@ static const u32 *vsc9959_regmap[] = {
- 	[REW]	= vsc9959_rew_regmap,
- 	[SYS]	= vsc9959_sys_regmap,
- 	[S2]	= vsc9959_s2_regmap,
-+	[PTP]	= vsc9959_ptp_regmap,
- 	[GCB]	= vsc9959_gcb_regmap,
- };
- 
-@@ -330,6 +341,11 @@ static struct resource vsc9959_target_io
- 		.end	= 0x00603ff,
- 		.name	= "s2",
- 	},
-+	[PTP] = {
-+		.start	= 0x0090000,
-+		.end	= 0x00900cb,
-+		.name	= "ptp",
-+	},
- 	[GCB] = {
- 		.start	= 0x0070000,
- 		.end	= 0x00701ff,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0269-net-dsa-ocelot-add-hardware-timestamping-support-for.patch b/target/linux/layerscape/patches-5.4/701-net-0269-net-dsa-ocelot-add-hardware-timestamping-support-for.patch
deleted file mode 100644
index d18f27e887..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0269-net-dsa-ocelot-add-hardware-timestamping-support-for.patch
+++ /dev/null
@@ -1,186 +0,0 @@
-From 34bfb24b8ff5af09b014ea8530e1e8d89bb2a155 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Wed, 20 Nov 2019 16:23:18 +0800
-Subject: [PATCH] net: dsa: ocelot: add hardware timestamping support for Felix
-
-This patch is to reuse ocelot functions as possible to enable PTP
-clock and to support hardware timestamping on Felix.
-On TX path, timestamping works on packet which requires timestamp.
-The injection header will be configured accordingly, and skb clone
-requires timestamp will be added into a list. The TX timestamp
-is final handled in threaded interrupt handler when PTP timestamp
-FIFO is ready.
-On RX path, timestamping is always working. The RX timestamp could
-be got from extraction header.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/ocelot/felix.c | 89 ++++++++++++++++++++++++++++++++++++++++++
- net/dsa/tag_ocelot.c           | 14 ++++++-
- 2 files changed, 102 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/ocelot/felix.c
-+++ b/drivers/net/dsa/ocelot/felix.c
-@@ -3,6 +3,7 @@
-  */
- #include <uapi/linux/if_bridge.h>
- #include <soc/mscc/ocelot.h>
-+#include <linux/packing.h>
- #include <linux/module.h>
- #include <linux/pci.h>
- #include <linux/of.h>
-@@ -303,6 +304,62 @@ static void felix_teardown(struct dsa_sw
- 	ocelot_deinit(ocelot);
- }
- 
-+static int felix_hwtstamp_get(struct dsa_switch *ds, int port,
-+			      struct ifreq *ifr)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	return ocelot_hwstamp_get(ocelot, port, ifr);
-+}
-+
-+static int felix_hwtstamp_set(struct dsa_switch *ds, int port,
-+			      struct ifreq *ifr)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+
-+	return ocelot_hwstamp_set(ocelot, port, ifr);
-+}
-+
-+static bool felix_rxtstamp(struct dsa_switch *ds, int port,
-+			   struct sk_buff *skb, unsigned int type)
-+{
-+	struct skb_shared_hwtstamps *shhwtstamps;
-+	struct ocelot *ocelot = ds->priv;
-+	u8 *extraction = skb->data - ETH_HLEN - OCELOT_TAG_LEN;
-+	u32 tstamp_lo, tstamp_hi;
-+	struct timespec64 ts;
-+	u64 tstamp, val;
-+
-+	ocelot_ptp_gettime64(&ocelot->ptp_info, &ts);
-+	tstamp = ktime_set(ts.tv_sec, ts.tv_nsec);
-+
-+	packing(extraction, &val,  116, 85, OCELOT_TAG_LEN, UNPACK, 0);
-+	tstamp_lo = (u32)val;
-+
-+	tstamp_hi = tstamp >> 32;
-+	if ((tstamp & 0xffffffff) < tstamp_lo)
-+		tstamp_hi--;
-+
-+	tstamp = ((u64)tstamp_hi << 32) | tstamp_lo;
-+
-+	shhwtstamps = skb_hwtstamps(skb);
-+	memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps));
-+	shhwtstamps->hwtstamp = tstamp;
-+	return false;
-+}
-+
-+bool felix_txtstamp(struct dsa_switch *ds, int port,
-+		    struct sk_buff *clone, unsigned int type)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+
-+	if (!ocelot_port_add_txtstamp_skb(ocelot_port, clone))
-+		return true;
-+
-+	return false;
-+}
-+
- static const struct dsa_switch_ops felix_switch_ops = {
- 	.get_tag_protocol	= felix_get_tag_protocol,
- 	.setup			= felix_setup,
-@@ -325,12 +382,33 @@ static const struct dsa_switch_ops felix
- 	.port_vlan_filtering	= felix_vlan_filtering,
- 	.port_vlan_add		= felix_vlan_add,
- 	.port_vlan_del		= felix_vlan_del,
-+	.port_hwtstamp_get	= felix_hwtstamp_get,
-+	.port_hwtstamp_set	= felix_hwtstamp_set,
-+	.port_rxtstamp		= felix_rxtstamp,
-+	.port_txtstamp		= felix_txtstamp,
- };
- 
- static struct felix_info *felix_instance_tbl[] = {
- 	[FELIX_INSTANCE_VSC9959] = &felix_info_vsc9959,
- };
- 
-+static irqreturn_t felix_irq_handler(int irq, void *data)
-+{
-+	struct ocelot *ocelot = (struct ocelot *)data;
-+
-+	/* The INTB interrupt is used for both PTP TX timestamp interrupt
-+	 * and preemption status change interrupt on each port.
-+	 *
-+	 * - Get txtstamp if have
-+	 * - TODO: handle preemption. Without handling it, driver may get
-+	 *   interrupt storm.
-+	 */
-+
-+	ocelot_get_txtstamp(ocelot);
-+
-+	return IRQ_HANDLED;
-+}
-+
- static int felix_pci_probe(struct pci_dev *pdev,
- 			   const struct pci_device_id *id)
- {
-@@ -372,6 +450,16 @@ static int felix_pci_probe(struct pci_de
- 
- 	pci_set_master(pdev);
- 
-+	err = devm_request_threaded_irq(&pdev->dev, pdev->irq, NULL,
-+					&felix_irq_handler, IRQF_ONESHOT,
-+					"felix-intb", ocelot);
-+	if (err) {
-+		dev_err(&pdev->dev, "Failed to request irq\n");
-+		goto err_alloc_irq;
-+	}
-+
-+	ocelot->ptp = 1;
-+
- 	ds = kzalloc(sizeof(struct dsa_switch), GFP_KERNEL);
- 	if (!ds) {
- 		err = -ENOMEM;
-@@ -396,6 +484,7 @@ static int felix_pci_probe(struct pci_de
- err_register_ds:
- 	kfree(ds);
- err_alloc_ds:
-+err_alloc_irq:
- err_alloc_felix:
- 	kfree(felix);
- err_dma:
---- a/net/dsa/tag_ocelot.c
-+++ b/net/dsa/tag_ocelot.c
-@@ -137,9 +137,11 @@ static struct sk_buff *ocelot_xmit(struc
- 				   struct net_device *netdev)
- {
- 	struct dsa_port *dp = dsa_slave_to_port(netdev);
--	u64 bypass, dest, src, qos_class;
-+	u64 bypass, dest, src, qos_class, rew_op;
- 	struct dsa_switch *ds = dp->ds;
- 	int port = dp->index;
-+	struct ocelot *ocelot = ds->priv;
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
- 	u8 *injection;
- 
- 	if (unlikely(skb_cow_head(skb, OCELOT_TAG_LEN) < 0)) {
-@@ -161,6 +163,16 @@ static struct sk_buff *ocelot_xmit(struc
- 	packing(injection, &src,       46,  43, OCELOT_TAG_LEN, PACK, 0);
- 	packing(injection, &qos_class, 19,  17, OCELOT_TAG_LEN, PACK, 0);
- 
-+	if (ocelot->ptp && (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
-+		rew_op = ocelot_port->ptp_cmd;
-+		if (ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP) {
-+			rew_op |= (ocelot_port->ts_id  % 4) << 3;
-+			ocelot_port->ts_id++;
-+		}
-+
-+		packing(injection, &rew_op, 125, 117, OCELOT_TAG_LEN, PACK, 0);
-+	}
-+
- 	return skb;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0270-net-mscc-ocelot-avoid-incorrect-consuming-in-skbs-li.patch b/target/linux/layerscape/patches-5.4/701-net-0270-net-mscc-ocelot-avoid-incorrect-consuming-in-skbs-li.patch
deleted file mode 100644
index 36fbffa2e1..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0270-net-mscc-ocelot-avoid-incorrect-consuming-in-skbs-li.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From e6208c23045ece890eebfe0564f73ccc52603867 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Wed, 27 Nov 2019 15:27:56 +0800
-Subject: [PATCH] net: mscc: ocelot: avoid incorrect consuming in skbs list
-
-Break the matching loop when find the matching skb for TX timestamp.
-This is to avoid consuming more skbs incorrectly. The timestamp ID
-is from 0 to 3 while the FIFO could support 128 timestamps at most.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -736,6 +736,7 @@ void ocelot_get_txtstamp(struct ocelot *
- 
- 			list_del(pos);
- 			kfree(entry);
-+			break;
- 		}
- 
- 		/* Next ts */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0271-net-mscc-ocelot-use-skb-queue-instead-of-skbs-list.patch b/target/linux/layerscape/patches-5.4/701-net-0271-net-mscc-ocelot-use-skb-queue-instead-of-skbs-list.patch
deleted file mode 100644
index 4ed7c26770..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0271-net-mscc-ocelot-use-skb-queue-instead-of-skbs-list.patch
+++ /dev/null
@@ -1,158 +0,0 @@
-From e7e0b3b89da97e3186fbe3774a1ca9b77402d893 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Wed, 27 Nov 2019 15:27:57 +0800
-Subject: [PATCH] net: mscc: ocelot: use skb queue instead of skbs list
-
-Convert to use skb queue instead of the list of skbs.
-The skb queue could provide protection with lock.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mscc/ocelot.c | 54 +++++++++++++-------------------------
- include/soc/mscc/ocelot.h          |  9 +------
- 2 files changed, 19 insertions(+), 44 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -583,18 +583,10 @@ int ocelot_port_add_txtstamp_skb(struct
- 
- 	if (ocelot->ptp && shinfo->tx_flags & SKBTX_HW_TSTAMP &&
- 	    ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP) {
--		struct ocelot_skb *oskb =
--			kzalloc(sizeof(struct ocelot_skb), GFP_ATOMIC);
--
--		if (unlikely(!oskb))
--			return -ENOMEM;
--
- 		shinfo->tx_flags |= SKBTX_IN_PROGRESS;
--
--		oskb->skb = skb;
--		oskb->id = ocelot_port->ts_id % 4;
--
--		list_add_tail(&oskb->head, &ocelot_port->skbs);
-+		/* Store timestamp ID in cb[0] of sk_buff */
-+		skb->cb[0] = ocelot_port->ts_id % 4;
-+		skb_queue_tail(&ocelot_port->tx_skbs, skb);
- 		return 0;
- 	}
- 	return -ENODATA;
-@@ -704,12 +696,11 @@ void ocelot_get_txtstamp(struct ocelot *
- 	int budget = OCELOT_PTP_QUEUE_SZ;
- 
- 	while (budget--) {
-+		struct sk_buff *skb, *skb_tmp, *skb_match = NULL;
- 		struct skb_shared_hwtstamps shhwtstamps;
--		struct list_head *pos, *tmp;
--		struct sk_buff *skb = NULL;
--		struct ocelot_skb *entry;
- 		struct ocelot_port *port;
- 		struct timespec64 ts;
-+		unsigned long flags;
- 		u32 val, id, txport;
- 
- 		val = ocelot_read(ocelot, SYS_PTP_STATUS);
-@@ -727,22 +718,22 @@ void ocelot_get_txtstamp(struct ocelot *
- 		/* Retrieve its associated skb */
- 		port = ocelot->ports[txport];
- 
--		list_for_each_safe(pos, tmp, &port->skbs) {
--			entry = list_entry(pos, struct ocelot_skb, head);
--			if (entry->id != id)
--				continue;
-+		spin_lock_irqsave(&port->tx_skbs.lock, flags);
- 
--			skb = entry->skb;
--
--			list_del(pos);
--			kfree(entry);
-+		skb_queue_walk_safe(&port->tx_skbs, skb, skb_tmp) {
-+			if (skb->cb[0] != id)
-+				continue;
-+			__skb_unlink(skb, &port->tx_skbs);
-+			skb_match = skb;
- 			break;
- 		}
- 
-+		spin_unlock_irqrestore(&port->tx_skbs.lock, flags);
-+
- 		/* Next ts */
- 		ocelot_write(ocelot, SYS_PTP_NXT_PTP_NXT, SYS_PTP_NXT);
- 
--		if (unlikely(!skb))
-+		if (unlikely(!skb_match))
- 			continue;
- 
- 		/* Get the h/w timestamp */
-@@ -751,9 +742,9 @@ void ocelot_get_txtstamp(struct ocelot *
- 		/* Set the timestamp into the skb */
- 		memset(&shhwtstamps, 0, sizeof(shhwtstamps));
- 		shhwtstamps.hwtstamp = ktime_set(ts.tv_sec, ts.tv_nsec);
--		skb_tstamp_tx(skb, &shhwtstamps);
-+		skb_tstamp_tx(skb_match, &shhwtstamps);
- 
--		dev_kfree_skb_any(skb);
-+		dev_kfree_skb_any(skb_match);
- 	}
- }
- EXPORT_SYMBOL(ocelot_get_txtstamp);
-@@ -2205,7 +2196,7 @@ void ocelot_init_port(struct ocelot *oce
- {
- 	struct ocelot_port *ocelot_port = ocelot->ports[port];
- 
--	INIT_LIST_HEAD(&ocelot_port->skbs);
-+	skb_queue_head_init(&ocelot_port->tx_skbs);
- 
- 	/* Basic L2 initialization */
- 
-@@ -2490,9 +2481,7 @@ EXPORT_SYMBOL(ocelot_init);
- 
- void ocelot_deinit(struct ocelot *ocelot)
- {
--	struct list_head *pos, *tmp;
- 	struct ocelot_port *port;
--	struct ocelot_skb *entry;
- 	int i;
- 
- 	cancel_delayed_work(&ocelot->stats_work);
-@@ -2504,14 +2493,7 @@ void ocelot_deinit(struct ocelot *ocelot
- 
- 	for (i = 0; i < ocelot->num_phys_ports; i++) {
- 		port = ocelot->ports[i];
--
--		list_for_each_safe(pos, tmp, &port->skbs) {
--			entry = list_entry(pos, struct ocelot_skb, head);
--
--			list_del(pos);
--			dev_kfree_skb_any(entry->skb);
--			kfree(entry);
--		}
-+		skb_queue_purge(&port->tx_skbs);
- 	}
- }
- EXPORT_SYMBOL(ocelot_deinit);
---- a/include/soc/mscc/ocelot.h
-+++ b/include/soc/mscc/ocelot.h
-@@ -406,13 +406,6 @@ struct ocelot_ops {
- 	int (*reset)(struct ocelot *ocelot);
- };
- 
--struct ocelot_skb {
--	struct list_head head;
--	struct sk_buff *skb;
--	u8 id;
--};
--
--
- struct ocelot_port {
- 	struct ocelot			*ocelot;
- 
-@@ -425,7 +418,7 @@ struct ocelot_port {
- 	u16				vid;
- 
- 	u8				ptp_cmd;
--	struct list_head		skbs;
-+	struct sk_buff_head		tx_skbs;
- 	u8				ts_id;
- };
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0272-net-mscc-ocelot-tsn-configuration-support.patch b/target/linux/layerscape/patches-5.4/701-net-0272-net-mscc-ocelot-tsn-configuration-support.patch
deleted file mode 100644
index 953b479a20..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0272-net-mscc-ocelot-tsn-configuration-support.patch
+++ /dev/null
@@ -1,1986 +0,0 @@
-From eb5556db4c4fb8dff9a7b716c66a1ea3d3e696ce Mon Sep 17 00:00:00 2001
-From: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
-Date: Fri, 29 Nov 2019 11:02:43 +0800
-Subject: [PATCH] net: mscc: ocelot: tsn configuration support
-
-Support TSN configuration for ocelot switch. The TSN configuration
-fucntions are based on tsn netlink interface, it can support Qbv,
-Qbu, Qci, 802.1CB, and Qav configuration now.
-
-Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
----
- drivers/net/ethernet/mscc/Makefile          |    1 +
- drivers/net/ethernet/mscc/ocelot.c          |   11 +-
- drivers/net/ethernet/mscc/ocelot.h          |    2 +
- drivers/net/ethernet/mscc/ocelot_ana.h      |   25 +-
- drivers/net/ethernet/mscc/ocelot_dev_gmii.h |  153 +++
- drivers/net/ethernet/mscc/ocelot_tsn.c      | 1572 +++++++++++++++++++++++++++
- drivers/net/ethernet/mscc/ocelot_tsn.h      |   51 +
- include/soc/mscc/ocelot.h                   |   52 +-
- 8 files changed, 1857 insertions(+), 10 deletions(-)
- create mode 100644 drivers/net/ethernet/mscc/ocelot_dev_gmii.h
- create mode 100644 drivers/net/ethernet/mscc/ocelot_tsn.c
- create mode 100644 drivers/net/ethernet/mscc/ocelot_tsn.h
-
---- a/drivers/net/ethernet/mscc/Makefile
-+++ b/drivers/net/ethernet/mscc/Makefile
-@@ -2,4 +2,5 @@
- obj-$(CONFIG_MSCC_OCELOT_SWITCH) += mscc_ocelot_common.o
- mscc_ocelot_common-y := ocelot.o ocelot_io.o
- mscc_ocelot_common-y += ocelot_regs.o ocelot_tc.o ocelot_police.o ocelot_ace.o ocelot_flower.o
-+mscc_ocelot_common-y += ocelot_tsn.o
- obj-$(CONFIG_MSCC_OCELOT_SWITCH_OCELOT) += ocelot_board.o
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -780,7 +780,7 @@ static void ocelot_set_rx_mode(struct ne
- 	 * forwarded to the CPU port.
- 	 */
- 	val = GENMASK(ocelot->num_phys_ports - 1, 0);
--	for (i = ocelot->num_phys_ports + 1; i < PGID_CPU; i++)
-+	for (i = ocelot->num_phys_ports + 1; i < PGID_MCRED; i++)
- 		ocelot_write_rix(ocelot, val, ANA_PGID_PGID, i);
- 
- 	__dev_mc_sync(dev, ocelot_mc_sync, ocelot_mc_unsync);
-@@ -2407,10 +2407,11 @@ int ocelot_init(struct ocelot *ocelot)
- 		     SYS_FRM_AGING_MAX_AGE(307692), SYS_FRM_AGING);
- 
- 	/* Setup flooding PGIDs */
--	ocelot_write_rix(ocelot, ANA_FLOODING_FLD_MULTICAST(PGID_MC) |
--			 ANA_FLOODING_FLD_BROADCAST(PGID_MC) |
--			 ANA_FLOODING_FLD_UNICAST(PGID_UC),
--			 ANA_FLOODING, 0);
-+	for (i = 0; i < 8; i++)
-+		ocelot_write_rix(ocelot, ANA_FLOODING_FLD_MULTICAST(PGID_MC) |
-+				 ANA_FLOODING_FLD_BROADCAST(PGID_MC) |
-+				 ANA_FLOODING_FLD_UNICAST(PGID_UC),
-+				 ANA_FLOODING, i);
- 	ocelot_write(ocelot, ANA_FLOODING_IPMC_FLD_MC6_DATA(PGID_MCIPV6) |
- 		     ANA_FLOODING_IPMC_FLD_MC6_CTRL(PGID_MC) |
- 		     ANA_FLOODING_IPMC_FLD_MC4_DATA(PGID_MCIPV4) |
---- a/drivers/net/ethernet/mscc/ocelot.h
-+++ b/drivers/net/ethernet/mscc/ocelot.h
-@@ -27,11 +27,13 @@
- #include "ocelot_qs.h"
- #include "ocelot_tc.h"
- #include "ocelot_ptp.h"
-+#include "ocelot_dev_gmii.h"
- 
- #define PGID_AGGR    64
- #define PGID_SRC     80
- 
- /* Reserved PGIDs */
-+#define PGID_MCRED   (PGID_AGGR - 25)
- #define PGID_CPU     (PGID_AGGR - 5)
- #define PGID_UC      (PGID_AGGR - 4)
- #define PGID_MC      (PGID_AGGR - 3)
---- a/drivers/net/ethernet/mscc/ocelot_ana.h
-+++ b/drivers/net/ethernet/mscc/ocelot_ana.h
-@@ -227,6 +227,11 @@
- #define ANA_TABLES_SFIDACCESS_SFID_TBL_CMD(x)             ((x) & GENMASK(1, 0))
- #define ANA_TABLES_SFIDACCESS_SFID_TBL_CMD_M              GENMASK(1, 0)
- 
-+#define SFIDACCESS_CMD_IDLE                             0
-+#define SFIDACCESS_CMD_READ                             1
-+#define SFIDACCESS_CMD_WRITE                            2
-+#define SFIDACCESS_CMD_INIT				3
-+
- #define ANA_TABLES_SFIDTIDX_SGID_VALID                    BIT(26)
- #define ANA_TABLES_SFIDTIDX_SGID(x)                       (((x) << 18) & GENMASK(25, 18))
- #define ANA_TABLES_SFIDTIDX_SGID_M                        GENMASK(25, 18)
-@@ -252,15 +257,23 @@
- #define ANA_SG_CONFIG_REG_3_LIST_LENGTH_M                 GENMASK(18, 16)
- #define ANA_SG_CONFIG_REG_3_LIST_LENGTH_X(x)              (((x) & GENMASK(18, 16)) >> 16)
- #define ANA_SG_CONFIG_REG_3_GATE_ENABLE                   BIT(20)
--#define ANA_SG_CONFIG_REG_3_INIT_IPS(x)                   (((x) << 24) & GENMASK(27, 24))
--#define ANA_SG_CONFIG_REG_3_INIT_IPS_M                    GENMASK(27, 24)
--#define ANA_SG_CONFIG_REG_3_INIT_IPS_X(x)                 (((x) & GENMASK(27, 24)) >> 24)
--#define ANA_SG_CONFIG_REG_3_INIT_GATE_STATE               BIT(28)
-+#define ANA_SG_CONFIG_REG_3_INIT_IPS(x)                   (((x) << 21) & GENMASK(24, 21))
-+#define ANA_SG_CONFIG_REG_3_INIT_IPS_M                    GENMASK(24, 21)
-+#define ANA_SG_CONFIG_REG_3_INIT_IPS_X(x)                 (((x) & GENMASK(24, 21)) >> 21)
-+#define ANA_SG_CONFIG_REG_3_IPV_VALID                     BIT(24)
-+#define ANA_SG_CONFIG_REG_3_IPV_INVALID(x)		  (((x) << 24) & GENMASK(24, 24))
-+#define ANA_SG_CONFIG_REG_3_INIT_IPV(x)                   (((x) << 21) & GENMASK(23, 21))
-+#define ANA_SG_CONFIG_REG_3_INIT_IPV_M                    GENMASK(23, 21)
-+#define ANA_SG_CONFIG_REG_3_INIT_IPV_X(x)                 (((x) & GENMASK(23, 21)) >> 21)
-+#define ANA_SG_CONFIG_REG_3_INIT_GATE_STATE               BIT(25)
- 
- #define ANA_SG_GCL_GS_CONFIG_RSZ                          0x4
- 
- #define ANA_SG_GCL_GS_CONFIG_IPS(x)                       ((x) & GENMASK(3, 0))
- #define ANA_SG_GCL_GS_CONFIG_IPS_M                        GENMASK(3, 0)
-+#define ANA_SG_GCL_GS_CONFIG_IPV_VALID                    BIT(3)
-+#define ANA_SG_GCL_GS_CONFIG_IPV(x)                       ((x) & GENMASK(2, 0))
-+#define ANA_SG_GCL_GS_CONFIG_IPV_M                        GENMASK(2, 0)
- #define ANA_SG_GCL_GS_CONFIG_GATE_STATE                   BIT(4)
- 
- #define ANA_SG_GCL_TI_CONFIG_RSZ                          0x4
-@@ -271,6 +284,10 @@
- #define ANA_SG_STATUS_REG_3_IPS(x)                        (((x) << 20) & GENMASK(23, 20))
- #define ANA_SG_STATUS_REG_3_IPS_M                         GENMASK(23, 20)
- #define ANA_SG_STATUS_REG_3_IPS_X(x)                      (((x) & GENMASK(23, 20)) >> 20)
-+#define ANA_SG_STATUS_REG_3_IPV_VALID                     BIT(23)
-+#define ANA_SG_STATUS_REG_3_IPV(x)                        (((x) << 20) & GENMASK(22, 20))
-+#define ANA_SG_STATUS_REG_3_IPV_M                         GENMASK(22, 20)
-+#define ANA_SG_STATUS_REG_3_IPV_X(x)                      (((x) & GENMASK(22, 20)) >> 20)
- #define ANA_SG_STATUS_REG_3_CONFIG_PENDING                BIT(24)
- 
- #define ANA_PORT_VLAN_CFG_GSZ                             0x100
---- /dev/null
-+++ b/drivers/net/ethernet/mscc/ocelot_dev_gmii.h
-@@ -0,0 +1,153 @@
-+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
-+/* Microsemi Ocelot Switch driver
-+ *
-+ * Copyright (c) 2017 Microsemi Corporation
-+ */
-+
-+#ifndef _MSCC_OCELOT_DEV_GMII_H_
-+#define _MSCC_OCELOT_DEV_GMII_H_
-+
-+#define DEV_GMII_PORT_MODE_CLOCK_CFG                      0x0
-+
-+#define DEV_GMII_PORT_MODE_CLOCK_CFG_MAC_TX_RST           BIT(5)
-+#define DEV_GMII_PORT_MODE_CLOCK_CFG_MAC_RX_RST           BIT(4)
-+#define DEV_GMII_PORT_MODE_CLOCK_CFG_PORT_RST             BIT(3)
-+#define DEV_GMII_PORT_MODE_CLOCK_CFG_PHY_RST              BIT(2)
-+#define DEV_GMII_PORT_MODE_CLOCK_CFG_LINK_SPEED(x)        ((x) & GENMASK(1, 0))
-+#define DEV_GMII_PORT_MODE_CLOCK_CFG_LINK_SPEED_M         GENMASK(1, 0)
-+
-+#define DEV_GMII_PORT_MODE_PORT_MISC                      0x4
-+
-+#define DEV_GMII_PORT_MODE_PORT_MISC_MPLS_RX_ENA          BIT(5)
-+#define DEV_GMII_PORT_MODE_PORT_MISC_FWD_ERROR_ENA        BIT(4)
-+#define DEV_GMII_PORT_MODE_PORT_MISC_FWD_PAUSE_ENA        BIT(3)
-+#define DEV_GMII_PORT_MODE_PORT_MISC_FWD_CTRL_ENA         BIT(2)
-+#define DEV_GMII_PORT_MODE_PORT_MISC_GMII_LOOP_ENA        BIT(1)
-+#define DEV_GMII_PORT_MODE_PORT_MISC_DEV_LOOP_ENA         BIT(0)
-+
-+#define DEV_GMII_PORT_MODE_EVENTS                         0x8
-+
-+#define DEV_GMII_PORT_MODE_EEE_CFG                        0xc
-+
-+#define DEV_GMII_PORT_MODE_EEE_CFG_EEE_ENA                BIT(22)
-+#define DEV_GMII_PORT_MODE_EEE_CFG_EEE_TIMER_AGE(x)       (((x) << 15) & GENMASK(21, 15))
-+#define DEV_GMII_PORT_MODE_EEE_CFG_EEE_TIMER_AGE_M        GENMASK(21, 15)
-+#define DEV_GMII_PORT_MODE_EEE_CFG_EEE_TIMER_AGE_X(x)     (((x) & GENMASK(21, 15)) >> 15)
-+#define DEV_GMII_PORT_MODE_EEE_CFG_EEE_TIMER_WAKEUP(x)    (((x) << 8) & GENMASK(14, 8))
-+#define DEV_GMII_PORT_MODE_EEE_CFG_EEE_TIMER_WAKEUP_M     GENMASK(14, 8)
-+#define DEV_GMII_PORT_MODE_EEE_CFG_EEE_TIMER_WAKEUP_X(x)  (((x) & GENMASK(14, 8)) >> 8)
-+#define DEV_GMII_PORT_MODE_EEE_CFG_EEE_TIMER_HOLDOFF(x)   (((x) << 1) & GENMASK(7, 1))
-+#define DEV_GMII_PORT_MODE_EEE_CFG_EEE_TIMER_HOLDOFF_M    GENMASK(7, 1)
-+#define DEV_GMII_PORT_MODE_EEE_CFG_EEE_TIMER_HOLDOFF_X(x) (((x) & GENMASK(7, 1)) >> 1)
-+#define DEV_GMII_PORT_MODE_EEE_CFG_PORT_LPI               BIT(0)
-+
-+#define DEV_GMII_PORT_MODE_RX_PATH_DELAY                  0x10
-+
-+#define DEV_GMII_PORT_MODE_TX_PATH_DELAY                  0x14
-+
-+#define DEV_GMII_PORT_MODE_PTP_PREDICT_CFG                0x18
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_ENA_CFG               0x1c
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_ENA_CFG_RX_ENA        BIT(4)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_ENA_CFG_TX_ENA        BIT(0)
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_MODE_CFG              0x20
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_MODE_CFG_FC_WORD_SYNC_ENA BIT(8)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_MODE_CFG_GIGA_MODE_ENA BIT(4)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_MODE_CFG_FDX_ENA      BIT(0)
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_MAXLEN_CFG            0x24
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_TAGS_CFG              0x28
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_TAGS_CFG_TAG_ID(x)    (((x) << 16) & GENMASK(31, 16))
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_TAGS_CFG_TAG_ID_M     GENMASK(31, 16)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_TAGS_CFG_TAG_ID_X(x)  (((x) & GENMASK(31, 16)) >> 16)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_TAGS_CFG_PB_ENA       BIT(1)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_TAGS_CFG_VLAN_AWR_ENA BIT(0)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_TAGS_CFG_VLAN_LEN_AWR_ENA BIT(2)
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_ADV_CHK_CFG           0x2c
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_ADV_CHK_CFG_LEN_DROP_ENA BIT(0)
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_IFG_CFG               0x30
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_IFG_CFG_RESTORE_OLD_IPG_CHECK BIT(17)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_IFG_CFG_REDUCED_TX_IFG BIT(16)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_IFG_CFG_TX_IFG(x)     (((x) << 8) & GENMASK(12, 8))
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_IFG_CFG_TX_IFG_M      GENMASK(12, 8)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_IFG_CFG_TX_IFG_X(x)   (((x) & GENMASK(12, 8)) >> 8)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_IFG_CFG_RX_IFG2(x)    (((x) << 4) & GENMASK(7, 4))
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_IFG_CFG_RX_IFG2_M     GENMASK(7, 4)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_IFG_CFG_RX_IFG2_X(x)  (((x) & GENMASK(7, 4)) >> 4)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_IFG_CFG_RX_IFG1(x)    ((x) & GENMASK(3, 0))
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_IFG_CFG_RX_IFG1_M     GENMASK(3, 0)
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_HDX_CFG               0x34
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_HDX_CFG_BYPASS_COL_SYNC BIT(26)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_HDX_CFG_OB_ENA        BIT(25)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_HDX_CFG_WEXC_DIS      BIT(24)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_HDX_CFG_SEED(x)       (((x) << 16) & GENMASK(23, 16))
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_HDX_CFG_SEED_M        GENMASK(23, 16)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_HDX_CFG_SEED_X(x)     (((x) & GENMASK(23, 16)) >> 16)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_HDX_CFG_SEED_LOAD     BIT(12)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_HDX_CFG_RETRY_AFTER_EXC_COL_ENA BIT(8)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_HDX_CFG_LATE_COL_POS(x) ((x) & GENMASK(6, 0))
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_HDX_CFG_LATE_COL_POS_M GENMASK(6, 0)
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_DBG_CFG               0x38
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_DBG_CFG_TBI_MODE      BIT(4)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_DBG_CFG_IFG_CRS_EXT_CHK_ENA BIT(0)
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_FC_MAC_LOW_CFG        0x3c
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_FC_MAC_HIGH_CFG       0x40
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_STICKY                0x44
-+
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_STICKY_RX_IPG_SHRINK_STICKY BIT(9)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_STICKY_RX_PREAM_SHRINK_STICKY BIT(8)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_STICKY_RX_CARRIER_EXT_STICKY BIT(7)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_STICKY_RX_CARRIER_EXT_ERR_STICKY BIT(6)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_STICKY_RX_JUNK_STICKY BIT(5)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_STICKY_TX_RETRANSMIT_STICKY BIT(4)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_STICKY_TX_JAM_STICKY  BIT(3)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_STICKY_TX_FIFO_OFLW_STICKY BIT(2)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_STICKY_TX_FRM_LEN_OVR_STICKY BIT(1)
-+#define DEV_GMII_MAC_CFG_STATUS_MAC_STICKY_TX_ABORT_STICKY BIT(0)
-+
-+#define DEV_GMII_MM_CONFIG_ENABLE_CONFIG                  0x48
-+
-+#define DEV_GMII_MM_CONFIG_ENABLE_CONFIG_MM_RX_ENA        BIT(0)
-+#define DEV_GMII_MM_CONFIG_ENABLE_CONFIG_MM_TX_ENA        BIT(4)
-+#define DEV_GMII_MM_CONFIG_ENABLE_CONFIG_KEEP_S_AFTER_D   BIT(8)
-+
-+#define DEV_GMII_MM_CONFIG_VERIF_CONFIG                   0x4c
-+
-+#define DEV_GMII_MM_CONFIG_VERIF_CONFIG_PRM_VERIFY_DIS    BIT(0)
-+#define DEV_GMII_MM_CONFIG_VERIF_CONFIG_PRM_VERIFY_TIME(x) (((x) << 4) & GENMASK(11, 4))
-+#define DEV_GMII_MM_CONFIG_VERIF_CONFIG_PRM_VERIFY_TIME_M GENMASK(11, 4)
-+#define DEV_GMII_MM_CONFIG_VERIF_CONFIG_PRM_VERIFY_TIME_X(x) (((x) & GENMASK(11, 4)) >> 4)
-+#define DEV_GMII_MM_CONFIG_VERIF_CONFIG_VERIF_TIMER_UNITS(x) (((x) << 12) & GENMASK(13, 12))
-+#define DEV_GMII_MM_CONFIG_VERIF_CONFIG_VERIF_TIMER_UNITS_M GENMASK(13, 12)
-+#define DEV_GMII_MM_CONFIG_VERIF_CONFIG_VERIF_TIMER_UNITS_X(x) (((x) & GENMASK(13, 12)) >> 12)
-+
-+#define DEV_GMII_MM_STATISTICS_MM_STATUS                  0x50
-+
-+#define DEV_GMII_MM_STATISTICS_MM_STATUS_PRMPT_ACTIVE_STATUS BIT(0)
-+#define DEV_GMII_MM_STATISTICS_MM_STATUS_PRMPT_ACTIVE_STICKY BIT(4)
-+#define DEV_GMII_MM_STATISTICS_MM_STATUS_PRMPT_VERIFY_STATE(x) (((x) << 8) & GENMASK(10, 8))
-+#define DEV_GMII_MM_STATISTICS_MM_STATUS_PRMPT_VERIFY_STATE_M GENMASK(10, 8)
-+#define DEV_GMII_MM_STATISTICS_MM_STATUS_PRMPT_VERIFY_STATE_X(x) (((x) & GENMASK(10, 8)) >> 8)
-+#define DEV_GMII_MM_STATISTICS_MM_STATUS_UNEXP_RX_PFRM_STICKY BIT(12)
-+#define DEV_GMII_MM_STATISTICS_MM_STATUS_UNEXP_TX_PFRM_STICKY BIT(16)
-+#define DEV_GMII_MM_STATISTICS_MM_STATUS_MM_RX_FRAME_STATUS BIT(20)
-+#define DEV_GMII_MM_STATISTICS_MM_STATUS_MM_TX_FRAME_STATUS BIT(24)
-+#define DEV_GMII_MM_STATISTICS_MM_STATUS_MM_TX_PRMPT_STATUS BIT(28)
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/mscc/ocelot_tsn.c
-@@ -0,0 +1,1572 @@
-+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-+/* Felix Switch TSN driver
-+ *
-+ * Copyright (c) 2018 Microsemi Corporation
-+ * Copyright 2018-2019 NXP
-+ */
-+
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/iopoll.h>
-+#include "ocelot.h"
-+#include <soc/mscc/ocelot_sys.h>
-+#include "ocelot_ana.h"
-+#include "ocelot_qsys.h"
-+#include "ocelot_rew.h"
-+#include "ocelot_dev_gmii.h"
-+#include "ocelot_tsn.h"
-+
-+#define MSCC_NUM_OUT_PORT 4 /* Number of physical output ports */
-+#define SE_IX_PORT 64
-+
-+/* MSCC TSN parameters limited */
-+#define NUM_MSCC_QOS_PRIO 8
-+#define MSCC_PSFP_SFID_NUM 176
-+#define MSCC_FRER_SSID_NUM 128
-+
-+/* Using the max number of MSCC_PSFP_SFID_NUM and MSCC_FRER_SSID_NUM */
-+#define MSCC_STREAM_HANDLE_NUM	MSCC_PSFP_SFID_NUM
-+
-+int streamhandle_map[MSCC_STREAM_HANDLE_NUM] = {0};
-+static struct mscc_switch_capa capa __ro_after_init = {
-+	.num_tas_gcl	= 64,
-+	.tas_ct_min	= 100,
-+	.tas_ct_max	= 1000000000,
-+	.tas_cte_max	= 999999999,
-+	.tas_it_max	= 999999999,
-+	.tas_it_min	= 1000,
-+	.num_hsch	= 72,
-+	.num_psfp_sfid	= MSCC_PSFP_SFID_NUM,
-+	.num_psfp_sgid	= 184,
-+	.psfp_fmi_max	= 246,
-+	.psfp_fmi_min	= 63,
-+	.num_sgi_gcl	= 4,
-+	.sgi_ct_min	= 5000,
-+	.sgi_ct_max	= 1000000000,
-+	.sgi_cte_max	= 999999999,
-+	.qos_pol_max	= 383,
-+	/* Maximum allowed value of committed burst size(CBS) is 240 KB */
-+	.pol_cbs_max	= 60,
-+	/* Maximum allowed value of excess burst size(EBS) is 240 KB */
-+	.pol_pbs_max	= 60,
-+	.num_frer_ssid  = MSCC_FRER_SSID_NUM,
-+	.frer_seq_len_min = 1,
-+	.frer_seq_len_max = 28,
-+	.frer_his_len_min = 1,
-+	.frer_his_len_max = 32,
-+	.qos_dscp_max	= 63,
-+	.qos_cos_max	= NUM_MSCC_QOS_PRIO - 1,
-+	.qos_dp_max	= 1,
-+};
-+
-+static int qos_port_tas_gcl_set(struct ocelot *ocelot, const u8 gcl_ix,
-+				struct tsn_qbv_entry *control_list)
-+{
-+	if (gcl_ix >= capa.num_tas_gcl) {
-+		dev_err(ocelot->dev, "Invalid gcl ix %u\n", gcl_ix);
-+		return -EINVAL;
-+	}
-+	if (control_list->time_interval < capa.tas_it_min ||
-+	    control_list->time_interval > capa.tas_it_max) {
-+		dev_err(ocelot->dev, "Invalid time_interval %u\n",
-+			control_list->time_interval);
-+
-+		return -EINVAL;
-+	}
-+
-+	ocelot_write(ocelot,
-+		     QSYS_GCL_CFG_REG_1_GCL_ENTRY_NUM(gcl_ix) |
-+		     QSYS_GCL_CFG_REG_1_GATE_STATE(control_list->gate_state),
-+		     QSYS_GCL_CFG_REG_1);
-+
-+	ocelot_write(ocelot,
-+		     control_list->time_interval,
-+		     QSYS_GCL_CFG_REG_2);
-+
-+	return 0;
-+}
-+
-+static u32 tas_read_status(struct ocelot *ocelot)
-+{
-+	u32 val;
-+
-+	val = ocelot_read(ocelot, QSYS_TAS_PARAM_CFG_CTRL);
-+
-+	return val;
-+}
-+
-+int ocelot_qbv_set(struct ocelot *ocelot, int port_id,
-+		   struct tsn_qbv_conf *shaper_config)
-+{
-+	struct tsn_qbv_basic *admin_basic = &shaper_config->admin;
-+	struct tsn_qbv_entry *control_list = admin_basic->control_list;
-+	u32 base_time_nsec = admin_basic->base_time % 1000000000;
-+	u64 base_time_sec = admin_basic->base_time / 1000000000;
-+	u64 cur_time;
-+	u32 val;
-+	u8 speed;
-+	int i;
-+	int ret;
-+
-+	if (admin_basic->control_list_length > capa.num_tas_gcl) {
-+		dev_err(ocelot->dev,
-+			"Invalid admin_control_list_length %u\n",
-+			admin_basic->control_list_length);
-+		return -EINVAL;
-+	}
-+
-+	if ((admin_basic->cycle_time < capa.tas_ct_min ||
-+	     admin_basic->cycle_time > capa.tas_ct_max) &&
-+	    shaper_config->gate_enabled) {
-+		dev_err(ocelot->dev, "Invalid admin_cycle_time %u ns\n",
-+			admin_basic->cycle_time);
-+		return -EINVAL;
-+	}
-+	if (admin_basic->cycle_time_extension > capa.tas_cte_max) {
-+		dev_err(ocelot->dev,
-+			"Invalid admin_cycle_time_extension %u\n",
-+			admin_basic->cycle_time_extension);
-+		return -EINVAL;
-+	}
-+
-+	cur_time = ocelot_read(ocelot, PTP_CUR_SEC_MSB);
-+	cur_time = cur_time << 32;
-+	cur_time += ocelot_read(ocelot, PTP_CUR_SEC_LSB);
-+
-+	if (base_time_sec < cur_time) {
-+		base_time_sec = cur_time;
-+		base_time_nsec = ocelot_read(ocelot, PTP_CUR_NSEC);
-+	}
-+
-+	/* Select port */
-+	ocelot_rmw(ocelot,
-+		   QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM(port_id),
-+		   QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM_M,
-+		   QSYS_TAS_PARAM_CFG_CTRL);
-+
-+	val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_8);
-+	if (val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING) {
-+		ocelot_rmw_rix(ocelot, 0, QSYS_TAG_CONFIG_ENABLE,
-+			       QSYS_TAG_CONFIG, port_id);
-+	}
-+
-+	if (!shaper_config->gate_enabled)
-+		admin_basic->gate_states = 0xff;
-+
-+	val = ocelot_read_gix(ocelot, ANA_PFC_PFC_CFG, port_id);
-+	speed = ANA_PFC_PFC_CFG_FC_LINK_SPEED(val);
-+
-+	ocelot_rmw_rix(ocelot,
-+		       (shaper_config->gate_enabled ?
-+			QSYS_TAG_CONFIG_ENABLE : 0) |
-+		       QSYS_TAG_CONFIG_INIT_GATE_STATE(admin_basic->gate_states) |
-+		       QSYS_TAG_CONFIG_SCH_TRAFFIC_QUEUES(0xff) |
-+		       QSYS_TAG_CONFIG_LINK_SPEED(speed),
-+		       QSYS_TAG_CONFIG_ENABLE |
-+		       QSYS_TAG_CONFIG_INIT_GATE_STATE_M |
-+		       QSYS_TAG_CONFIG_SCH_TRAFFIC_QUEUES_M |
-+		       QSYS_TAG_CONFIG_LINK_SPEED_M,
-+		       QSYS_TAG_CONFIG,
-+		       port_id);
-+
-+	ocelot_write_rix(ocelot, shaper_config->maxsdu,
-+			 QSYS_PORT_MAX_SDU, port_id);
-+	/* TODO: add queue max SDU set */
-+
-+	if (shaper_config->gate_enabled) {
-+		ocelot_write(ocelot, base_time_nsec,
-+			     QSYS_PARAM_CFG_REG_1);
-+
-+		ocelot_write(ocelot, base_time_sec & GENMASK(31, 0),
-+			     QSYS_PARAM_CFG_REG_2);
-+
-+		ocelot_write(ocelot,
-+			     QSYS_PARAM_CFG_REG_3_BASE_TIME_SEC_MSB(base_time_sec >> 32) |
-+			     QSYS_PARAM_CFG_REG_3_LIST_LENGTH(admin_basic->control_list_length),
-+			     QSYS_PARAM_CFG_REG_3);
-+
-+		ocelot_write(ocelot, admin_basic->cycle_time,
-+			     QSYS_PARAM_CFG_REG_4);
-+
-+		ocelot_write(ocelot, admin_basic->cycle_time_extension,
-+			     QSYS_PARAM_CFG_REG_5);
-+
-+		for (i = 0; i < admin_basic->control_list_length; i++) {
-+			qos_port_tas_gcl_set(ocelot, i, control_list);
-+			control_list++;
-+		}
-+
-+		/* Start configuration change */
-+		ocelot_rmw(ocelot,
-+			   QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE,
-+			   QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE,
-+			   QSYS_TAS_PARAM_CFG_CTRL);
-+
-+		ret = readx_poll_timeout(tas_read_status, ocelot, val,
-+					 !(QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE
-+					 & val), 10, 100000);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+int ocelot_qbv_get(struct ocelot *ocelot, int port_id,
-+		   struct tsn_qbv_conf *shaper_config)
-+{
-+	u32 val, reg;
-+	int i;
-+	u32 base_timel;
-+	u32 base_timeh;
-+	struct tsn_qbv_basic *admin = &shaper_config->admin;
-+	struct tsn_qbv_entry *list;
-+
-+	ocelot_rmw(ocelot,
-+		   QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM(port_id),
-+		   QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM_M,
-+		   QSYS_TAS_PARAM_CFG_CTRL);
-+
-+	val = ocelot_read_rix(ocelot, QSYS_TAG_CONFIG, port_id);
-+	shaper_config->gate_enabled = (val & QSYS_TAG_CONFIG_ENABLE);
-+	admin->gate_states = QSYS_TAG_CONFIG_INIT_GATE_STATE_X(val);
-+
-+	base_timel = ocelot_read(ocelot, QSYS_PARAM_CFG_REG_1);
-+	base_timeh = ocelot_read(ocelot, QSYS_PARAM_CFG_REG_2);
-+	reg = ocelot_read(ocelot, QSYS_PARAM_CFG_REG_3);
-+	admin->base_time = base_timeh |
-+		(((u64)QSYS_PARAM_CFG_REG_3_BASE_TIME_SEC_MSB(reg)) << 32);
-+
-+	admin->base_time = (admin->base_time * 1000000000) + base_timel;
-+
-+	admin->control_list_length =
-+		QSYS_PARAM_CFG_REG_3_LIST_LENGTH_X(reg);
-+
-+	admin->cycle_time = ocelot_read(ocelot, QSYS_PARAM_CFG_REG_4);
-+	admin->cycle_time_extension =
-+		ocelot_read(ocelot, QSYS_PARAM_CFG_REG_5);
-+
-+	list = kmalloc_array(admin->control_list_length,
-+			     sizeof(struct tsn_qbv_entry), GFP_KERNEL);
-+	admin->control_list = list;
-+
-+	for (i = 0; i < admin->control_list_length; i++) {
-+		ocelot_rmw(ocelot,
-+			   QSYS_GCL_CFG_REG_1_GCL_ENTRY_NUM(i),
-+			   QSYS_GCL_CFG_REG_1_GCL_ENTRY_NUM_M,
-+			   QSYS_GCL_CFG_REG_1);
-+
-+		list->time_interval =
-+			ocelot_read(ocelot, QSYS_GCL_CFG_REG_2);
-+
-+		reg = ocelot_read(ocelot, QSYS_GCL_CFG_REG_1);
-+		list->gate_state = QSYS_GCL_CFG_REG_1_GATE_STATE_X(reg);
-+
-+		list++;
-+	}
-+
-+	return 0;
-+}
-+
-+static int qbv_get_gatelist(struct ocelot *ocelot,
-+			    struct tsn_qbv_basic *oper)
-+{
-+	u32 base_timel;
-+	u32 base_timeh;
-+	u32 val;
-+	struct tsn_qbv_entry *glist;
-+	int i;
-+
-+	base_timel = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_1);
-+	base_timeh = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_2);
-+	val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_3);
-+	oper->base_time = base_timeh;
-+	oper->base_time +=
-+		((u64)QSYS_PARAM_STATUS_REG_3_BASE_TIME_SEC_MSB(val)) <<
-+		32;
-+	oper->base_time = (oper->base_time * 1000000000) + base_timel;
-+
-+	oper->control_list_length =
-+		QSYS_PARAM_STATUS_REG_3_LIST_LENGTH_X(val);
-+
-+	oper->cycle_time = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_4);
-+	oper->cycle_time_extension = ocelot_read(ocelot,
-+						 QSYS_PARAM_STATUS_REG_5);
-+
-+	val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_8);
-+	oper->gate_states = QSYS_PARAM_STATUS_REG_8_OPER_GATE_STATE_X(val);
-+
-+	glist = kmalloc_array(oper->control_list_length,
-+			      sizeof(struct tsn_qbv_entry), GFP_KERNEL);
-+
-+	oper->control_list = glist;
-+
-+	for (i = 0; i < oper->control_list_length; i++) {
-+		ocelot_rmw(ocelot,
-+			   QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM(i),
-+			   QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM_M,
-+			   QSYS_GCL_STATUS_REG_1);
-+
-+		val = ocelot_read(ocelot, QSYS_GCL_STATUS_REG_2);
-+		glist->time_interval = val;
-+		val = ocelot_read(ocelot, QSYS_GCL_STATUS_REG_1);
-+		glist->gate_state =
-+			QSYS_GCL_STATUS_REG_1_GATE_STATE_X(val);
-+
-+		glist++;
-+	}
-+
-+	return 0;
-+}
-+
-+int ocelot_qbv_get_status(struct ocelot *ocelot, int port_id,
-+			  struct tsn_qbv_status *qbvstatus)
-+{
-+	struct tsn_qbv_basic *oper = &qbvstatus->oper;
-+	u32 val;
-+	ptptime_t cur_time;
-+
-+	ocelot_rmw(ocelot,
-+		   QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM(port_id),
-+		   QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM_M,
-+		   QSYS_TAS_PARAM_CFG_CTRL);
-+
-+	qbvstatus->supported_list_max = capa.num_tas_gcl;
-+
-+	val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_8);
-+	qbvstatus->config_pending =
-+		(val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING) ? 1 : 0;
-+
-+	qbvstatus->config_change_time =
-+		ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_7);
-+
-+	qbvstatus->config_change_time +=
-+		((u64)QSYS_PARAM_STATUS_REG_8_CFG_CHG_TIME_SEC_MSB(val)) <<
-+		32;
-+
-+	qbvstatus->config_change_time =
-+		(qbvstatus->config_change_time * 1000000000) +
-+		ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_6);
-+
-+	qbvstatus->config_change_error =
-+		ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_9);
-+
-+	cur_time = ocelot_read(ocelot, PTP_CUR_SEC_MSB);
-+	cur_time = cur_time << 32;
-+	cur_time += ocelot_read(ocelot, PTP_CUR_SEC_LSB);
-+	cur_time = (cur_time * 1000000000) +
-+		   ocelot_read(ocelot, PTP_CUR_NSEC);
-+
-+	qbvstatus->current_time = cur_time;
-+	qbv_get_gatelist(ocelot, oper);
-+
-+	return 0;
-+}
-+
-+int ocelot_cut_thru_set(struct ocelot *ocelot, int port_id, u8 cut_thru)
-+{
-+	ocelot_write_rix(ocelot, cut_thru, ANA_CUT_THRU_CFG, port_id);
-+
-+	return 0;
-+}
-+
-+static int qos_shaper_conf_set(struct ocelot *ocelot, int port,
-+			       u32 port_ix, u8 percent)
-+{
-+	u32 val;
-+	int speed;
-+	u32 cbs = 0;
-+	u32 cir = 0;
-+
-+	if (percent > 100) {
-+		dev_err(ocelot->dev, "percentage %d larger than 100\n",
-+			percent);
-+		return -EINVAL;
-+	}
-+	if (port_ix >= capa.num_hsch) {
-+		dev_err(ocelot->dev,
-+			"CIR_CFG: id %d is exceed num of HSCH instance\n",
-+			port_ix);
-+		return -EINVAL;
-+	}
-+
-+	val = ocelot_read_gix(ocelot, ANA_PFC_PFC_CFG, port);
-+	speed = ANA_PFC_PFC_CFG_FC_LINK_SPEED(val);
-+	switch (speed) {
-+	case OCELOT_SPEED_10:
-+		cir = 10000;
-+		break;
-+	case OCELOT_SPEED_100:
-+		cir = 100000;
-+		break;
-+	case OCELOT_SPEED_1000:
-+		cir = 1000000;
-+		break;
-+	case OCELOT_SPEED_2500:
-+		cir = 2500000;
-+		break;
-+	}
-+
-+	cir = cir * percent / 100;
-+	cir = DIV_ROUND_UP(cir, 100);  /* Rate unit is 100 kbps */
-+	cir = (cir ? cir : 1);              /* Avoid using zero rate */
-+	cbs = DIV_ROUND_UP(cbs, 4096); /* Burst unit is 4kB */
-+	cbs = (cbs ? cbs : 1);		/* Avoid using zero burst size */
-+	cir = min_t(u32, GENMASK(15, 0), cir);
-+	cbs = min_t(u32, GENMASK(6, 0), cbs);
-+	ocelot_write_gix(ocelot,
-+			 QSYS_CIR_CFG_CIR_RATE(cir) |
-+			 QSYS_CIR_CFG_CIR_BURST(cbs),
-+			 QSYS_CIR_CFG,
-+			 port_ix);
-+
-+	return 0;
-+}
-+
-+static int qos_shaper_conf_get(struct ocelot *ocelot, int port,
-+			       u32 port_ix)
-+{
-+	u32 val;
-+	u32 bandwidth = 0;
-+	u32 cir = 0;
-+	int percentage;
-+	int speed;
-+
-+	if (port_ix >= capa.num_hsch) {
-+		dev_err(ocelot->dev,
-+			"CIR_CFG: id %d is exceed num of HSCH instance\n",
-+			port_ix);
-+		return -EINVAL;
-+	}
-+
-+	val = ocelot_read_gix(ocelot, ANA_PFC_PFC_CFG, port);
-+	speed = ANA_PFC_PFC_CFG_FC_LINK_SPEED(val);
-+	switch (speed) {
-+	case OCELOT_SPEED_10:
-+		bandwidth = 10000;
-+		break;
-+	case OCELOT_SPEED_100:
-+		bandwidth = 100000;
-+		break;
-+	case OCELOT_SPEED_1000:
-+		bandwidth = 1000000;
-+		break;
-+	case OCELOT_SPEED_2500:
-+		bandwidth = 2500000;
-+		break;
-+	}
-+
-+	val = ocelot_read_gix(ocelot, QSYS_CIR_CFG, port_ix);
-+
-+	cir = QSYS_CIR_CFG_CIR_RATE_X(val);
-+	cir *= 100;
-+	percentage = cir * 100 / bandwidth;
-+
-+	return percentage;
-+}
-+
-+int ocelot_cbs_set(struct ocelot *ocelot, int port, u8 tc, u8 bw)
-+{
-+	if (tc > capa.qos_cos_max) {
-+		dev_err(ocelot->dev, "Invalid tc: %u\n", tc);
-+		return -EINVAL;
-+	}
-+
-+	qos_shaper_conf_set(ocelot, port, port * 8 + tc, bw);
-+
-+	ocelot_rmw_gix(ocelot,
-+		       QSYS_SE_CFG_SE_AVB_ENA,
-+		       QSYS_SE_CFG_SE_AVB_ENA,
-+		       QSYS_SE_CFG,
-+		       port * 8 + tc);
-+
-+	return 0;
-+}
-+
-+int ocelot_cbs_get(struct ocelot *ocelot, int port, u8 tc)
-+{
-+	int ret;
-+
-+	if (tc > capa.qos_cos_max) {
-+		dev_err(ocelot->dev, "Invalid tc: %u\n", tc);
-+		return -EINVAL;
-+	}
-+
-+	ret = qos_shaper_conf_get(ocelot, port, port * 8 + tc);
-+
-+	return ret;
-+}
-+
-+int ocelot_qbu_set(struct ocelot *ocelot, int port, u8 preemptible)
-+{
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+
-+	ocelot_port_rmwl(ocelot_port,
-+			 DEV_GMII_MM_CONFIG_ENABLE_CONFIG_MM_RX_ENA |
-+			 DEV_GMII_MM_CONFIG_ENABLE_CONFIG_MM_TX_ENA,
-+			 DEV_GMII_MM_CONFIG_ENABLE_CONFIG_MM_RX_ENA |
-+			 DEV_GMII_MM_CONFIG_ENABLE_CONFIG_MM_TX_ENA,
-+			 DEV_GMII_MM_CONFIG_ENABLE_CONFIG);
-+
-+	ocelot_rmw_rix(ocelot,
-+		       QSYS_PREEMPTION_CFG_P_QUEUES(preemptible),
-+		       QSYS_PREEMPTION_CFG_P_QUEUES_M,
-+		       QSYS_PREEMPTION_CFG,
-+		       port);
-+
-+	return 0;
-+}
-+
-+int ocelot_qbu_get(struct ocelot *ocelot, int port,
-+		   struct tsn_preempt_status *c)
-+{
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+	u32 val;
-+
-+	val = ocelot_read_rix(ocelot,
-+			      QSYS_PREEMPTION_CFG,
-+			      port);
-+
-+	c->admin_state = QSYS_PREEMPTION_CFG_P_QUEUES(val);
-+	c->hold_advance = QSYS_PREEMPTION_CFG_HOLD_ADVANCE_X(val);
-+
-+	val = ocelot_port_readl(ocelot_port,
-+				DEV_GMII_MM_STATISTICS_MM_STATUS);
-+	c->preemption_active =
-+		DEV_GMII_MM_STATISTICS_MM_STATUS_PRMPT_ACTIVE_STATUS & val;
-+
-+	return 0;
-+}
-+
-+int ocelot_cb_streamid_get(struct ocelot *ocelot, int port, u32 index,
-+			   struct tsn_cb_streamid *streamid)
-+{
-+	u32 m_index;
-+	u32 bucket;
-+	u32 val, dst, reg;
-+	u64 dmac;
-+	u32 ldmac, hdmac;
-+
-+	if (index >= MSCC_STREAM_HANDLE_NUM) {
-+		dev_err(ocelot->dev,
-+			"Invalid stream handle %u, maximum:%u\n",
-+			index, MSCC_STREAM_HANDLE_NUM - 1);
-+		return -EINVAL;
-+	}
-+
-+	index = streamhandle_map[index];
-+	m_index = index / 4;
-+	bucket =  index % 4;
-+	streamid->type = 1;
-+	regmap_field_write(ocelot->regfields[ANA_TABLES_MACTINDX_BUCKET],
-+			   bucket);
-+	regmap_field_write(ocelot->regfields[ANA_TABLES_MACTINDX_M_INDEX],
-+			   m_index);
-+
-+	/*READ command MACACCESS.VALID(11 bit) must be 0 */
-+	ocelot_write(ocelot,
-+		     ANA_TABLES_MACACCESS_MAC_TABLE_CMD(MACACCESS_CMD_READ),
-+		     ANA_TABLES_MACACCESS);
-+
-+	val = ocelot_read(ocelot, ANA_TABLES_MACACCESS);
-+	dst = ANA_TABLES_MACACCESS_DEST_IDX_X(val);
-+	reg = ocelot_read_rix(ocelot, ANA_PGID_PGID, dst);
-+	streamid->ofac_oport = ANA_PGID_PGID_PGID(reg);
-+
-+	/*Get the entry's MAC address and VLAN id*/
-+	ldmac = ocelot_read(ocelot, ANA_TABLES_MACLDATA);
-+	val = ocelot_read(ocelot, ANA_TABLES_MACHDATA);
-+	val &= 0x1fffffff;
-+	hdmac = val & 0xffff;
-+	dmac = hdmac;
-+	dmac = (dmac << 32) | ldmac;
-+	streamid->para.nid.dmac = dmac;
-+
-+	streamid->para.nid.vid = ANA_TABLES_MACHDATA_VID_X(val);
-+
-+	val = ocelot_read(ocelot, ANA_TABLES_STREAMDATA);
-+	if (!(val & ANA_TABLES_STREAMDATA_SFID_VALID))
-+		return -EINVAL;
-+
-+	streamid->handle = ANA_TABLES_STREAMDATA_SFID(val);
-+
-+	return 0;
-+}
-+
-+static int lookup_mactable(struct ocelot *ocelot, u16 vid, u64 mac)
-+{
-+	u32 mach, macl;
-+	u32 reg1, reg2;
-+	u32 index, bucket;
-+
-+	macl = mac & 0xffffffff;
-+	mach = (mac >> 32) & 0xffff;
-+	ocelot_write(ocelot, macl, ANA_TABLES_MACLDATA);
-+	ocelot_write(ocelot, ANA_TABLES_MACHDATA_VID(vid) |
-+		     ANA_TABLES_MACHDATA_MACHDATA(mach),
-+		     ANA_TABLES_MACHDATA);
-+
-+	ocelot_write(ocelot, ANA_TABLES_MACACCESS_VALID |
-+		     ANA_TABLES_MACACCESS_MAC_TABLE_CMD(MACACCESS_CMD_READ),
-+		     ANA_TABLES_MACACCESS);
-+
-+	reg1 = ocelot_read(ocelot, ANA_TABLES_MACLDATA);
-+	reg2 = ocelot_read(ocelot, ANA_TABLES_MACHDATA);
-+	if (reg1 == 0 && reg2 == 0)
-+		return -1;
-+
-+	regmap_field_read(ocelot->regfields[ANA_TABLES_MACTINDX_BUCKET],
-+			  &bucket);
-+	regmap_field_read(ocelot->regfields[ANA_TABLES_MACTINDX_M_INDEX],
-+			  &index);
-+
-+	index = index * 4 + bucket;
-+
-+	return index;
-+}
-+
-+int ocelot_cb_streamid_set(struct ocelot *ocelot, int port,
-+			   u32 index, bool enable,
-+			   struct tsn_cb_streamid *streamid)
-+{
-+	struct regmap_field *rf;
-+	u16 vid;
-+	u64 mac;
-+	u32 macl, mach;
-+	u32 dst_idx;
-+	int idx;
-+	u32 reg;
-+	int sfid, ssid;
-+	u32 m_index, bucket;
-+
-+	if (!enable) {
-+		if (index >= MSCC_STREAM_HANDLE_NUM) {
-+			dev_err(ocelot->dev,
-+				"Invalid index %u, maximum:%u\n",
-+				index, MSCC_STREAM_HANDLE_NUM - 1);
-+			return -EINVAL;
-+		}
-+		m_index = streamhandle_map[index] / 4;
-+		bucket =  streamhandle_map[index] % 4;
-+		rf = ocelot->regfields[ANA_TABLES_MACTINDX_BUCKET];
-+		regmap_field_write(rf, bucket);
-+		rf = ocelot->regfields[ANA_TABLES_MACTINDX_M_INDEX];
-+		regmap_field_write(rf, m_index);
-+
-+		/*READ command MACACCESS.VALID(11 bit) must be 0 */
-+		ocelot_write(ocelot,
-+			     ANA_TABLES_MACACCESS_MAC_TABLE_CMD(MACACCESS_CMD_READ),
-+			     ANA_TABLES_MACACCESS);
-+
-+		ocelot_write(ocelot,
-+			     ANA_TABLES_MACACCESS_MAC_TABLE_CMD(MACACCESS_CMD_FORGET),
-+			     ANA_TABLES_MACACCESS);
-+
-+		streamhandle_map[index] = 0;
-+
-+		return 0;
-+	}
-+
-+	if (streamid->type != 1) {
-+		dev_err(ocelot->dev, "Invalid stream type\n");
-+		return -EINVAL;
-+	}
-+
-+	if (streamid->handle >= MSCC_STREAM_HANDLE_NUM) {
-+		dev_err(ocelot->dev,
-+			"Invalid stream handle %u, maximum:%u\n",
-+			streamid->handle, MSCC_STREAM_HANDLE_NUM - 1);
-+		return -EINVAL;
-+	}
-+
-+	sfid = streamid->handle;
-+	ssid = (streamid->handle < MSCC_FRER_SSID_NUM ?
-+		streamid->handle : (MSCC_FRER_SSID_NUM - 1));
-+
-+	mac = streamid->para.nid.dmac;
-+	macl = mac & 0xffffffff;
-+	mach = (mac >> 32) & 0xffff;
-+	vid = streamid->para.nid.vid;
-+
-+	idx = lookup_mactable(ocelot, vid, mac);
-+
-+	if (idx < 0) {
-+		ocelot_write(ocelot, macl, ANA_TABLES_MACLDATA);
-+		ocelot_write(ocelot, ANA_TABLES_MACHDATA_VID(vid) |
-+			     ANA_TABLES_MACHDATA_MACHDATA(mach),
-+			     ANA_TABLES_MACHDATA);
-+
-+		ocelot_write(ocelot,
-+			     ANA_TABLES_STREAMDATA_SFID_VALID |
-+			     ANA_TABLES_STREAMDATA_SFID(sfid) |
-+			     ANA_TABLES_STREAMDATA_SSID_VALID |
-+			     ANA_TABLES_STREAMDATA_SSID(ssid),
-+			     ANA_TABLES_STREAMDATA);
-+
-+		dst_idx = port;
-+		ocelot_write(ocelot, ANA_TABLES_MACACCESS_VALID |
-+			     ANA_TABLES_MACACCESS_ENTRYTYPE(1) |
-+			     ANA_TABLES_MACACCESS_DEST_IDX(dst_idx) |
-+			     ANA_TABLES_MACACCESS_MAC_TABLE_CMD(MACACCESS_CMD_LEARN),
-+			     ANA_TABLES_MACACCESS);
-+
-+		ocelot_write(ocelot, ANA_TABLES_MACACCESS_VALID |
-+			     ANA_TABLES_MACACCESS_MAC_TABLE_CMD(MACACCESS_CMD_READ),
-+			     ANA_TABLES_MACACCESS);
-+
-+		regmap_field_read(ocelot->regfields[ANA_TABLES_MACTINDX_BUCKET],
-+				  &bucket);
-+		regmap_field_read(ocelot->regfields[ANA_TABLES_MACTINDX_M_INDEX],
-+				  &m_index);
-+
-+		m_index = m_index * 4 + bucket;
-+		streamhandle_map[streamid->handle] = m_index;
-+
-+		return 0;
-+	}
-+
-+	ocelot_write(ocelot,
-+		     ANA_TABLES_STREAMDATA_SFID_VALID |
-+		     ANA_TABLES_STREAMDATA_SFID(sfid) |
-+		     ANA_TABLES_STREAMDATA_SSID_VALID |
-+		     ANA_TABLES_STREAMDATA_SSID(ssid),
-+		     ANA_TABLES_STREAMDATA);
-+
-+	reg = ocelot_read(ocelot, ANA_TABLES_MACACCESS);
-+	dst_idx = ANA_TABLES_MACACCESS_DEST_IDX_X(reg);
-+	ocelot_write(ocelot, ANA_TABLES_MACACCESS_VALID |
-+		     ANA_TABLES_MACACCESS_ENTRYTYPE(1) |
-+		     ANA_TABLES_MACACCESS_DEST_IDX(dst_idx) |
-+		     ANA_TABLES_MACACCESS_MAC_TABLE_CMD(MACACCESS_CMD_WRITE),
-+		     ANA_TABLES_MACACCESS);
-+
-+	streamhandle_map[streamid->handle] = idx;
-+
-+	return 0;
-+}
-+
-+static int streamid_multi_forward_set(struct ocelot *ocelot, u32 index,
-+				      u8 fwdmask)
-+{
-+	u32 m_index;
-+	u32 bucket;
-+	u32 val;
-+	int m, n, i;
-+	u8 pgid_val, fwdport;
-+	u32 dst_idx;
-+
-+	m_index = index / 4;
-+	bucket =  index % 4;
-+
-+	regmap_field_write(ocelot->regfields[ANA_TABLES_MACTINDX_BUCKET],
-+			   bucket);
-+	regmap_field_write(ocelot->regfields[ANA_TABLES_MACTINDX_M_INDEX],
-+			   m_index);
-+
-+	/*READ command MACACCESS.VALID(11 bit) must be 0 */
-+	ocelot_write(ocelot,
-+		     ANA_TABLES_MACACCESS_MAC_TABLE_CMD(MACACCESS_CMD_READ),
-+		     ANA_TABLES_MACACCESS);
-+
-+	val = ocelot_read(ocelot, ANA_TABLES_MACACCESS);
-+	fwdport = ANA_TABLES_MACACCESS_DEST_IDX_X(val);
-+
-+	if (fwdport >= MSCC_NUM_OUT_PORT) {
-+		dst_idx = fwdport;
-+		return 0;
-+	}
-+
-+	fwdmask |= (1 << fwdport);
-+
-+	m = ocelot->num_phys_ports - 1;
-+	for (i = m; i >= MSCC_NUM_OUT_PORT; i--) {
-+		if (fwdmask & (1 << i)) {
-+			dst_idx = PGID_MCRED +
-+				  (m - i) * MSCC_NUM_OUT_PORT +
-+				  fwdport;
-+
-+			pgid_val = (1 << i) | (1 << fwdport);
-+			break;
-+		}
-+	}
-+
-+	if (i < MSCC_NUM_OUT_PORT) {
-+		m = PGID_MCRED +
-+		    (ocelot->num_phys_ports - MSCC_NUM_OUT_PORT) *
-+		    MSCC_NUM_OUT_PORT;
-+
-+		for (; i > 0; i--) {
-+			if (fwdmask & (1 << i))
-+				break;
-+
-+			m = m + (1 << i) - 1;
-+		}
-+		n = fwdmask & ((1 << i) - 1);
-+		if (n) {
-+			dst_idx = m + n;
-+			pgid_val = fwdmask & ((1 << MSCC_NUM_OUT_PORT) - 1);
-+		} else {
-+			dst_idx = fwdport;
-+		}
-+	}
-+
-+	if (dst_idx < PGID_MCRED)
-+		return 0;
-+
-+	ocelot_write(ocelot, ANA_TABLES_MACACCESS_VALID |
-+		     ANA_TABLES_MACACCESS_ENTRYTYPE(1) |
-+		     ANA_TABLES_MACACCESS_DEST_IDX(dst_idx) |
-+		     ANA_TABLES_MACACCESS_MAC_TABLE_CMD(MACACCESS_CMD_WRITE),
-+		     ANA_TABLES_MACACCESS);
-+
-+	ocelot_write_rix(ocelot, pgid_val, ANA_PGID_PGID, dst_idx);
-+
-+	return 0;
-+}
-+
-+int ocelot_qci_sfi_get(struct ocelot *ocelot, int port, u32 index,
-+		       struct tsn_qci_psfp_sfi_conf *sfi)
-+{
-+	u32 val, reg, fmeter_id, max_sdu;
-+	u32 sfid = index;
-+
-+	if (sfid >= capa.num_psfp_sfid) {
-+		dev_err(ocelot->dev, "Invalid index %u, maximum:%u\n",
-+			sfid, capa.num_psfp_sfid);
-+		return -EINVAL;
-+	}
-+
-+	ocelot_rmw(ocelot,
-+		   ANA_TABLES_SFIDTIDX_SFID_INDEX(sfid),
-+		   ANA_TABLES_SFIDTIDX_SFID_INDEX_M,
-+		   ANA_TABLES_SFIDTIDX);
-+
-+	ocelot_write(ocelot,
-+		     ANA_TABLES_SFIDACCESS_SFID_TBL_CMD(SFIDACCESS_CMD_READ),
-+		     ANA_TABLES_SFIDACCESS);
-+
-+	val = ocelot_read(ocelot, ANA_TABLES_SFIDTIDX);
-+	if (!(val & ANA_TABLES_SFIDTIDX_SGID_VALID))
-+		return -EINVAL;
-+
-+	sfi->stream_gate_instance_id = ANA_TABLES_SFIDTIDX_SGID_X(val);
-+	fmeter_id = ANA_TABLES_SFIDTIDX_POL_IDX_X(val);
-+	sfi->stream_filter.flow_meter_instance_id = fmeter_id;
-+
-+	reg = ocelot_read(ocelot, ANA_TABLES_SFIDACCESS);
-+	max_sdu = ANA_TABLES_SFIDACCESS_MAX_SDU_LEN_X(reg);
-+	sfi->stream_filter.maximum_sdu_size  = max_sdu;
-+
-+	if (reg & ANA_TABLES_SFIDACCESS_IGR_PRIO_MATCH_ENA)
-+		sfi->priority_spec = ANA_TABLES_SFIDACCESS_IGR_PRIO_X(reg);
-+	else
-+		dev_err(ocelot->dev, "priority not enable\n");
-+
-+	return 0;
-+}
-+
-+int ocelot_qci_sfi_set(struct ocelot *ocelot, int port,
-+		       u32 index, bool enable,
-+		       struct tsn_qci_psfp_sfi_conf *sfi)
-+{
-+	int igr_prio = sfi->priority_spec;
-+	u16 sgid  = sfi->stream_gate_instance_id;
-+	u16 pol_idx;
-+	int fmid = sfi->stream_filter.flow_meter_instance_id;
-+	u16 max_sdu_len = sfi->stream_filter.maximum_sdu_size;
-+	int sfid = index;
-+	u32 val;
-+
-+	if (fmid == -1)
-+		pol_idx = capa.psfp_fmi_max;
-+	else
-+		pol_idx = (u16)fmid;
-+
-+	if (sfid >= capa.num_psfp_sfid) {
-+		dev_err(ocelot->dev, "Invalid index %u, maximum:%u\n",
-+			sfid, capa.num_psfp_sfid);
-+		return -EINVAL;
-+	}
-+
-+	if (!enable) {
-+		val = ANA_TABLES_SFIDACCESS_SFID_TBL_CMD(SFIDACCESS_CMD_WRITE);
-+		ocelot_write(ocelot,
-+			     ANA_TABLES_SFIDTIDX_SFID_INDEX(sfid),
-+			     ANA_TABLES_SFIDTIDX);
-+		ocelot_write(ocelot, val, ANA_TABLES_SFIDACCESS);
-+		return 0;
-+	}
-+
-+	if (sgid >= capa.num_psfp_sgid) {
-+		dev_err(ocelot->dev, "Invalid sgid %u, maximum:%u\n",
-+			sgid, capa.num_psfp_sgid);
-+		return -EINVAL;
-+	}
-+	if (pol_idx > capa.psfp_fmi_max || pol_idx < capa.psfp_fmi_min) {
-+		dev_err(ocelot->dev, "Invalid pol_idx %u, range:%d~%d\n",
-+			pol_idx, capa.psfp_fmi_min, capa.psfp_fmi_max);
-+		return -EINVAL;
-+	}
-+
-+	ocelot_write(ocelot, ANA_TABLES_SFIDTIDX_SGID_VALID |
-+		     ANA_TABLES_SFIDTIDX_SGID(sgid) |
-+		     ((fmid != -1) ? ANA_TABLES_SFIDTIDX_POL_ENA : 0) |
-+		     ANA_TABLES_SFIDTIDX_POL_IDX(pol_idx) |
-+		     ANA_TABLES_SFIDTIDX_SFID_INDEX(sfid),
-+		     ANA_TABLES_SFIDTIDX);
-+
-+	ocelot_write(ocelot,
-+		     ((igr_prio >= 0) ?
-+		      ANA_TABLES_SFIDACCESS_IGR_PRIO_MATCH_ENA : 0) |
-+		     ANA_TABLES_SFIDACCESS_IGR_PRIO(igr_prio) |
-+		     ANA_TABLES_SFIDACCESS_MAX_SDU_LEN(max_sdu_len) |
-+		     ANA_TABLES_SFIDACCESS_SFID_TBL_CMD(SFIDACCESS_CMD_WRITE),
-+		     ANA_TABLES_SFIDACCESS);
-+
-+	return 0;
-+}
-+
-+int ocelot_qci_sfi_counters_get(struct ocelot *ocelot, int port,
-+				u32 index,
-+				struct tsn_qci_psfp_sfi_counters *sfi_cnt)
-+{
-+	u32 sfid = index;
-+	u32 match, not_pass, not_pass_sdu, red;
-+
-+	if (sfid >= capa.num_psfp_sfid) {
-+		dev_err(ocelot->dev, "Invalid index %u, maximum:%u\n",
-+			sfid, capa.num_psfp_sfid);
-+		return -EINVAL;
-+	}
-+
-+	ocelot_rmw(ocelot,
-+		   SYS_STAT_CFG_STAT_VIEW(sfid),
-+		   SYS_STAT_CFG_STAT_VIEW_M,
-+		   SYS_STAT_CFG);
-+
-+	match = ocelot_read_gix(ocelot, SYS_CNT, 0x200);
-+	not_pass = ocelot_read_gix(ocelot, SYS_CNT, 0x201);
-+	not_pass_sdu = ocelot_read_gix(ocelot, SYS_CNT, 0x202);
-+	red = ocelot_read_gix(ocelot, SYS_CNT, 0x203);
-+
-+	sfi_cnt->matching_frames_count = match;
-+	sfi_cnt->not_passing_frames_count = not_pass;
-+	sfi_cnt->not_passing_sdu_count = not_pass_sdu;
-+	sfi_cnt->red_frames_count  =  red;
-+
-+	sfi_cnt->passing_frames_count = match - not_pass;
-+	sfi_cnt->passing_sdu_count = match - not_pass - not_pass_sdu;
-+
-+	return 0;
-+}
-+
-+int ocelot_qci_max_cap_get(struct ocelot *ocelot,
-+			   struct tsn_qci_psfp_stream_param *stream_para)
-+{
-+	/* MaxStreamFilterInstances */
-+	stream_para->max_sf_instance = capa.num_psfp_sfid;
-+	/* MaxStreamGateInstances */
-+	stream_para->max_sg_instance = capa.num_psfp_sgid;
-+	/* MaxFlowMeterInstances */
-+	stream_para->max_fm_instance = capa.psfp_fmi_max -
-+				       capa.psfp_fmi_min + 1;
-+	/* SupportedListMax */
-+	stream_para->supported_list_max = capa.num_sgi_gcl;
-+
-+	return 0;
-+}
-+
-+static int sgi_set_glist(struct ocelot *ocelot,
-+			 struct tsn_qci_psfp_gcl *gcl, uint32_t num)
-+{
-+	u32 time_sum = 0;
-+	int i;
-+
-+	if (num > capa.num_sgi_gcl)
-+		return -EINVAL;
-+
-+	for (i = 0; i < num; i++) {
-+		u32 val = ANA_SG_GCL_GS_CONFIG_IPS((gcl->ipv < 0) ?
-+						   0 : gcl->ipv + 8);
-+		val |= (gcl->gate_state ? ANA_SG_GCL_GS_CONFIG_GATE_STATE : 0);
-+		ocelot_write_rix(ocelot, val, ANA_SG_GCL_GS_CONFIG, i);
-+
-+		time_sum += gcl->time_interval;
-+		ocelot_write_rix(ocelot, time_sum, ANA_SG_GCL_TI_CONFIG, i);
-+
-+		gcl++;
-+	}
-+
-+	return 0;
-+}
-+
-+static u32 sgi_read_status(struct ocelot *ocelot)
-+{
-+	u32 val;
-+
-+	val = ocelot_read(ocelot, ANA_SG_ACCESS_CTRL);
-+
-+	return val;
-+}
-+
-+int ocelot_qci_sgi_set(struct ocelot *ocelot, int port, u32 index,
-+		       struct tsn_qci_psfp_sgi_conf *sgi_conf)
-+{
-+	struct tsn_qci_sg_control *admin_list = &sgi_conf->admin;
-+	u32 sgid = index;
-+	u32 list_length = sgi_conf->admin.control_list_length;
-+	u32 cycle_time = sgi_conf->admin.cycle_time;
-+	u32 cycle_time_ex = sgi_conf->admin.cycle_time_extension;
-+	u32 l_basetime = sgi_conf->admin.base_time % 1000000000;
-+	u64 h_basetime = sgi_conf->admin.base_time / 1000000000;
-+	u64 cur_time;
-+	u32 val;
-+	int ret;
-+
-+	if (sgid >= capa.num_psfp_sgid) {
-+		dev_err(ocelot->dev, "Invalid sgid %u, maximum:%u\n",
-+			sgid, capa.num_psfp_sgid);
-+		return -EINVAL;
-+	}
-+	if ((cycle_time < capa.sgi_ct_min ||
-+	     cycle_time > capa.sgi_ct_max) &&
-+	     sgi_conf->gate_enabled) {
-+		dev_err(ocelot->dev, "Invalid cycle_time %u ns\n",
-+			cycle_time);
-+		return -EINVAL;
-+	}
-+	if (cycle_time_ex > capa.sgi_cte_max) {
-+		dev_err(ocelot->dev,
-+			"Invalid cycle_time_extension %u\n",
-+			cycle_time_ex);
-+		return -EINVAL;
-+	}
-+	if (list_length > capa.num_sgi_gcl) {
-+		dev_err(ocelot->dev,
-+			"Invalid sgi_gcl len %u, maximum:%u\n",
-+			list_length, capa.num_sgi_gcl);
-+		return -EINVAL;
-+	}
-+
-+	/*configure SGID*/
-+	ocelot_rmw(ocelot,
-+		   ANA_SG_ACCESS_CTRL_SGID(sgid),
-+		   ANA_SG_ACCESS_CTRL_SGID_M,
-+		   ANA_SG_ACCESS_CTRL);
-+
-+	/*Disable SG*/
-+	if (!sgi_conf->gate_enabled) {
-+		ocelot_rmw(ocelot,
-+			   ANA_SG_CONFIG_REG_3_INIT_GATE_STATE,
-+			   ANA_SG_CONFIG_REG_3_INIT_GATE_STATE |
-+			   ANA_SG_CONFIG_REG_3_GATE_ENABLE,
-+			   ANA_SG_CONFIG_REG_3);
-+		return 0;
-+	}
-+
-+	/*admin parameters*/
-+	cur_time = ocelot_read(ocelot, PTP_CUR_SEC_MSB);
-+	cur_time = cur_time << 32;
-+	cur_time += ocelot_read(ocelot, PTP_CUR_SEC_LSB);
-+	if (h_basetime < cur_time) {
-+		h_basetime = cur_time;
-+		l_basetime = ocelot_read(ocelot, PTP_CUR_NSEC);
-+	}
-+
-+	ocelot_write(ocelot, l_basetime, ANA_SG_CONFIG_REG_1);
-+	ocelot_write(ocelot, h_basetime, ANA_SG_CONFIG_REG_2);
-+
-+	ocelot_write(ocelot,
-+		     (sgi_conf->admin.init_ipv < 0 ?
-+		      0 : ANA_SG_CONFIG_REG_3_IPV_VALID) |
-+		     ANA_SG_CONFIG_REG_3_INIT_IPV(sgi_conf->admin.init_ipv) |
-+		     ANA_SG_CONFIG_REG_3_GATE_ENABLE |
-+		     ANA_SG_CONFIG_REG_3_LIST_LENGTH(list_length) |
-+		     (sgi_conf->admin.gate_states > 0 ?
-+		      ANA_SG_CONFIG_REG_3_INIT_GATE_STATE : 0) |
-+		     ANA_SG_CONFIG_REG_3_BASE_TIME_SEC_MSB(h_basetime >> 32),
-+		     ANA_SG_CONFIG_REG_3);
-+
-+	ocelot_write(ocelot, cycle_time, ANA_SG_CONFIG_REG_4);
-+	ocelot_write(ocelot, cycle_time_ex, ANA_SG_CONFIG_REG_5);
-+
-+	ret = sgi_set_glist(ocelot, admin_list->gcl, list_length);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Start configuration change */
-+	ocelot_rmw(ocelot,
-+		   ANA_SG_ACCESS_CTRL_CONFIG_CHANGE,
-+		   ANA_SG_ACCESS_CTRL_CONFIG_CHANGE,
-+		   ANA_SG_ACCESS_CTRL);
-+
-+	ret = readx_poll_timeout(sgi_read_status, ocelot, val,
-+				 (!(ANA_SG_ACCESS_CTRL_CONFIG_CHANGE & val)),
-+				 10, 100000);
-+
-+	return ret;
-+}
-+
-+static int sgi_get_glist(struct ocelot *ocelot,
-+			 struct tsn_qci_psfp_gcl *gcl,
-+			 uint32_t num)
-+{
-+	int i;
-+	u16 val;
-+	u32 time = 0;
-+	u32 reg;
-+
-+	if (num > capa.num_sgi_gcl)
-+		return -EINVAL;
-+
-+	for (i = 0; i < num; i++) {
-+		val = ocelot_read_rix(ocelot, ANA_SG_GCL_GS_CONFIG, i);
-+		gcl->gate_state = (val & ANA_SG_GCL_GS_CONFIG_GATE_STATE);
-+
-+		if (val & ANA_SG_GCL_GS_CONFIG_IPV_VALID)
-+			gcl->ipv = ANA_SG_GCL_GS_CONFIG_IPV(val);
-+		else
-+			gcl->ipv = -1;
-+
-+		reg = ocelot_read_rix(ocelot, ANA_SG_GCL_TI_CONFIG, i);
-+		gcl->time_interval = (reg - time);
-+		time = reg;
-+
-+		gcl++;
-+	}
-+
-+	return 0;
-+}
-+
-+int ocelot_qci_sgi_get(struct ocelot *ocelot, int port, u32 index,
-+		       struct tsn_qci_psfp_sgi_conf *sgi_conf)
-+{
-+	struct tsn_qci_sg_control *admin  = &sgi_conf->admin;
-+	struct tsn_qci_psfp_gcl *glist;
-+	u32 val, reg;
-+	u32 list_num;
-+	int ret;
-+
-+	if (index >= capa.num_psfp_sgid) {
-+		dev_err(ocelot->dev, "Invalid sgid %u, maximum:%u\n",
-+			index, capa.num_psfp_sgid);
-+		return -EINVAL;
-+	}
-+
-+	ocelot_rmw(ocelot,
-+		   ANA_SG_ACCESS_CTRL_SGID(index),
-+		   ANA_SG_ACCESS_CTRL_SGID_M,
-+		   ANA_SG_ACCESS_CTRL);
-+
-+	admin->cycle_time = ocelot_read(ocelot, ANA_SG_CONFIG_REG_4);
-+	admin->cycle_time_extension =
-+		ocelot_read(ocelot, ANA_SG_CONFIG_REG_5);
-+
-+	val = ocelot_read(ocelot, ANA_SG_CONFIG_REG_2);
-+	admin->base_time = val;
-+
-+	reg = ocelot_read(ocelot, ANA_SG_CONFIG_REG_1);
-+	val = ocelot_read(ocelot, ANA_SG_CONFIG_REG_3);
-+
-+	admin->base_time +=
-+		ANA_SG_CONFIG_REG_3_BASE_TIME_SEC_MSB(val) << 32;
-+
-+	admin->base_time = admin->base_time * 1000000000 + reg;
-+
-+	if (val & ANA_SG_CONFIG_REG_3_IPV_VALID)
-+		admin->init_ipv = ANA_SG_CONFIG_REG_3_INIT_IPV_X(val);
-+	else
-+		admin->init_ipv = -1;
-+
-+	if (val & ANA_SG_CONFIG_REG_3_GATE_ENABLE)
-+		sgi_conf->gate_enabled = TRUE;
-+
-+	admin->control_list_length = ANA_SG_CONFIG_REG_3_LIST_LENGTH_X(val);
-+
-+	list_num = admin->control_list_length;
-+
-+	glist = kmalloc_array(list_num, sizeof(struct tsn_qci_psfp_gcl),
-+			      GFP_KERNEL);
-+	admin->gcl = glist;
-+
-+	ret = sgi_get_glist(ocelot, glist, list_num);
-+
-+	return ret;
-+}
-+
-+int ocelot_qci_sgi_status_get(struct ocelot *ocelot, int port, u32 index,
-+			      struct tsn_psfp_sgi_status *sgi_status)
-+{
-+	u32 val, reg;
-+
-+	if (index >= capa.num_psfp_sgid) {
-+		dev_err(ocelot->dev, "Invalid sgid %u, maximum:%u\n",
-+			index, capa.num_psfp_sgid);
-+		return -EINVAL;
-+	}
-+
-+	ocelot_rmw(ocelot,
-+		   ANA_SG_ACCESS_CTRL_SGID(index),
-+		   ANA_SG_ACCESS_CTRL_SGID_M,
-+		   ANA_SG_ACCESS_CTRL);
-+
-+	val = ocelot_read(ocelot, ANA_SG_STATUS_REG_2);
-+	sgi_status->config_change_time = val;
-+
-+	reg = ocelot_read(ocelot, ANA_SG_STATUS_REG_1);
-+	val = ocelot_read(ocelot, ANA_SG_STATUS_REG_3);
-+	sgi_status->config_change_time +=
-+		ANA_SG_STATUS_REG_3_CFG_CHG_TIME_SEC_MSB(val) << 32;
-+	sgi_status->config_change_time =
-+		sgi_status->config_change_time * 1000000000 + reg;
-+
-+	if (val & ANA_SG_STATUS_REG_3_CONFIG_PENDING)
-+		sgi_status->config_pending  = TRUE;
-+	else
-+		sgi_status->config_pending = FALSE;
-+
-+	if (val & ANA_SG_STATUS_REG_3_GATE_STATE)
-+		sgi_status->oper.gate_states  =  TRUE;
-+	else
-+		sgi_status->oper.gate_states  =  FALSE;
-+	/*bit 3 encoding 0:IPV [0:2]is invalid . 1:IPV[0:2] is valid*/
-+	if (val & ANA_SG_STATUS_REG_3_IPV_VALID)
-+		sgi_status->oper.init_ipv = ANA_SG_STATUS_REG_3_IPV_X(val);
-+	else
-+		sgi_status->oper.init_ipv = -1;
-+
-+	return 0;
-+}
-+
-+int ocelot_qci_fmi_set(struct ocelot *ocelot, int port, u32 index,
-+		       bool enable, struct tsn_qci_psfp_fmi *fmi)
-+{
-+	u32 cir = 0, cbs = 0, pir = 0, pbs = 0;
-+	u32 cir_ena = 0;
-+	u32 pbs_max = 0, cbs_max = 0;
-+	bool cir_discard = 0, pir_discard = 0;
-+
-+	if (index > capa.qos_pol_max) {
-+		dev_err(ocelot->dev, "Invalid pol_idx %u, maximum: %u\n",
-+			index, capa.qos_pol_max);
-+		return -EINVAL;
-+	}
-+
-+	if (fmi->mark_red_enable && fmi->mark_red) {
-+		fmi->eir = 0;
-+		fmi->ebs = 0;
-+		fmi->cir = 0;
-+		fmi->cbs = 0;
-+	}
-+
-+	pir = fmi->eir;
-+	pbs = fmi->ebs;
-+
-+	if (!fmi->drop_on_yellow)
-+		cir_ena = 1;
-+
-+	if (cir_ena) {
-+		cir = fmi->cir;
-+		cbs = fmi->cbs;
-+		if (cir == 0 && cbs == 0) {
-+			cir_discard = 1;
-+		} else {
-+			cir = DIV_ROUND_UP(cir, 100);
-+			cir *= 3;  /* Rate unit is 33 1/3 kbps */
-+			cbs = DIV_ROUND_UP(cbs, 4096);
-+			cbs = (cbs ? cbs : 1);
-+			cbs_max = capa.pol_cbs_max;
-+			if (fmi->cf)
-+				pir += fmi->cir;
-+		}
-+	}
-+
-+	if (pir == 0 && pbs == 0) {
-+		pir_discard = 1;
-+	} else {
-+		pir = DIV_ROUND_UP(pir, 100);
-+		pir *= 3;  /* Rate unit is 33 1/3 kbps */
-+		pbs = DIV_ROUND_UP(pbs, 4096);
-+		pbs = (pbs ? pbs : 1);
-+		pbs_max = capa.pol_pbs_max;
-+	}
-+	pir = min_t(u32, GENMASK(15, 0), pir);
-+	cir = min_t(u32, GENMASK(15, 0), cir);
-+	pbs = min(pbs_max, pbs);
-+	cbs = min(cbs_max, cbs);
-+
-+	ocelot_write_gix(ocelot, (ANA_POL_MODE_CFG_IPG_SIZE(20) |
-+			 ANA_POL_MODE_CFG_FRM_MODE(1) |
-+			 (fmi->cf ? ANA_POL_MODE_CFG_DLB_COUPLED : 0) |
-+			 (cir_ena ? ANA_POL_MODE_CFG_CIR_ENA : 0) |
-+			 ANA_POL_MODE_CFG_OVERSHOOT_ENA),
-+			 ANA_POL_MODE_CFG, index);
-+
-+	ocelot_write_gix(ocelot, ANA_POL_PIR_CFG_PIR_RATE(pir) |
-+			 ANA_POL_PIR_CFG_PIR_BURST(pbs),
-+			 ANA_POL_PIR_CFG, index);
-+
-+	ocelot_write_gix(ocelot,
-+			 (pir_discard ? GENMASK(22, 0) : 0),
-+			 ANA_POL_PIR_STATE, index);
-+
-+	ocelot_write_gix(ocelot, ANA_POL_CIR_CFG_CIR_RATE(cir) |
-+			 ANA_POL_CIR_CFG_CIR_BURST(cbs),
-+			 ANA_POL_CIR_CFG, index);
-+
-+	ocelot_write_gix(ocelot,
-+			 (cir_discard ? GENMASK(22, 0) : 0),
-+			 ANA_POL_CIR_STATE, index);
-+
-+	return 0;
-+}
-+
-+int ocelot_qci_fmi_get(struct ocelot *ocelot, int port, u32 index,
-+		       struct tsn_qci_psfp_fmi *fmi,
-+		       struct tsn_qci_psfp_fmi_counters *counters)
-+{
-+	u32 val, reg;
-+
-+	if (index > capa.qos_pol_max) {
-+		dev_err(ocelot->dev, "Invalid pol_idx %u, maximum: %u\n",
-+			index, capa.qos_pol_max);
-+		return -EINVAL;
-+	}
-+
-+	val = ocelot_read_gix(ocelot, ANA_POL_PIR_CFG, index);
-+	reg = ocelot_read_gix(ocelot, ANA_POL_CIR_CFG, index);
-+
-+	fmi->eir = ANA_POL_PIR_CFG_PIR_RATE_X(val);
-+	fmi->eir = fmi->eir * 100 / 3;
-+	fmi->ebs = ANA_POL_PIR_CFG_PIR_BURST(val);
-+	fmi->ebs *= 4096;
-+	fmi->cir = ANA_POL_CIR_CFG_CIR_RATE_X(reg);
-+	fmi->cir = fmi->cir * 100 / 3;
-+	fmi->cbs = ANA_POL_CIR_CFG_CIR_BURST(reg);
-+	fmi->cbs *= 4096;
-+	if (!(fmi->eir | fmi->ebs | fmi->cir | fmi->cbs))
-+		fmi->mark_red = TRUE;
-+	else
-+		fmi->mark_red = FALSE;
-+
-+	val = ocelot_read_gix(ocelot, ANA_POL_MODE_CFG, index);
-+	if (val & ANA_POL_MODE_CFG_DLB_COUPLED)
-+		fmi->cf = TRUE;
-+	else
-+		fmi->cf = FALSE;
-+	if (val & ANA_POL_MODE_CFG_CIR_ENA)
-+		fmi->drop_on_yellow = FALSE;
-+	else
-+		fmi->drop_on_yellow = TRUE;
-+
-+	return 0;
-+}
-+
-+int ocelot_seq_gen_set(struct ocelot *ocelot, int port, u32 index,
-+		       struct tsn_seq_gen_conf *sg_conf)
-+{
-+	u8 iport_mask = sg_conf->iport_mask;
-+	u8 split_mask = sg_conf->split_mask;
-+	u8 seq_len = sg_conf->seq_len;
-+	u32 seq_num = sg_conf->seq_num;
-+
-+	if (index >= capa.num_frer_ssid) {
-+		dev_err(ocelot->dev, "Invalid SSID %u, maximum:%u\n",
-+			index, capa.num_frer_ssid - 1);
-+		return -EINVAL;
-+	}
-+	if (seq_len < capa.frer_seq_len_min ||
-+	    seq_len > capa.frer_seq_len_max) {
-+		dev_err(ocelot->dev,
-+			"Invalid seq_space_bits num %u,range:%d~%d\n",
-+			seq_len,
-+			capa.frer_seq_len_min,
-+			capa.frer_seq_len_max);
-+		return -EINVAL;
-+	}
-+
-+	streamid_multi_forward_set(ocelot,
-+				   streamhandle_map[index],
-+				   split_mask);
-+
-+	ocelot_write(ocelot,
-+		     ANA_TABLES_SEQ_MASK_SPLIT_MASK(split_mask) |
-+		     ANA_TABLES_SEQ_MASK_INPUT_PORT_MASK(iport_mask),
-+		     ANA_TABLES_SEQ_MASK);
-+
-+	ocelot_write(ocelot,
-+		     ANA_TABLES_STREAMTIDX_S_INDEX(index) |
-+		     ANA_TABLES_STREAMTIDX_STREAM_SPLIT |
-+		     ANA_TABLES_STREAMTIDX_SEQ_SPACE_LOG2(seq_len),
-+		     ANA_TABLES_STREAMTIDX);
-+
-+	ocelot_write(ocelot,
-+		     ANA_TABLES_STREAMACCESS_GEN_REC_SEQ_NUM(seq_num) |
-+		     ANA_TABLES_STREAMACCESS_SEQ_GEN_REC_ENA |
-+		     ANA_TABLES_STREAMACCESS_STREAM_TBL_CMD(SFIDACCESS_CMD_WRITE),
-+		     ANA_TABLES_STREAMACCESS);
-+
-+	return 0;
-+}
-+
-+int ocelot_seq_rec_set(struct ocelot *ocelot, int port, u32 index,
-+		       struct tsn_seq_rec_conf *sr_conf)
-+{
-+	u8 seq_len = sr_conf->seq_len;
-+	u8 hislen = sr_conf->his_len;
-+
-+	if (index >= capa.num_frer_ssid) {
-+		dev_err(ocelot->dev, "Invalid SSID %u, maximum:%u\n",
-+			index, capa.num_frer_ssid - 1);
-+		return -EINVAL;
-+	}
-+	if (seq_len < capa.frer_seq_len_min ||
-+	    seq_len > capa.frer_seq_len_max) {
-+		dev_err(ocelot->dev,
-+			"Invalid seq_space_bits num %u,range:%d~%d\n",
-+			seq_len,
-+			capa.frer_seq_len_min,
-+			capa.frer_seq_len_max);
-+		return -EINVAL;
-+	}
-+	if (hislen < capa.frer_his_len_min ||
-+	    hislen > capa.frer_his_len_max) {
-+		dev_err(ocelot->dev,
-+			"Invalid history_bits num %u,range:%d~%d\n",
-+			hislen,
-+			capa.frer_his_len_min,
-+			capa.frer_his_len_max);
-+		return -EINVAL;
-+	}
-+
-+	ocelot_write(ocelot,
-+		     ANA_TABLES_STREAMTIDX_S_INDEX(index) |
-+		     ANA_TABLES_STREAMTIDX_FORCE_SF_BEHAVIOUR |
-+		     ANA_TABLES_STREAMTIDX_SEQ_HISTORY_LEN(hislen) |
-+		     ANA_TABLES_STREAMTIDX_RESET_ON_ROGUE |
-+		     (sr_conf->rtag_pop_en ?
-+		      ANA_TABLES_STREAMTIDX_REDTAG_POP : 0) |
-+		     ANA_TABLES_STREAMTIDX_SEQ_SPACE_LOG2(seq_len),
-+		     ANA_TABLES_STREAMTIDX);
-+
-+	ocelot_write(ocelot,
-+		     ANA_TABLES_STREAMACCESS_SEQ_GEN_REC_ENA |
-+		     ANA_TABLES_STREAMACCESS_GEN_REC_TYPE |
-+		     ANA_TABLES_STREAMACCESS_STREAM_TBL_CMD(SFIDACCESS_CMD_WRITE),
-+		     ANA_TABLES_STREAMACCESS);
-+
-+	return 0;
-+}
-+
-+int ocelot_cb_get(struct ocelot *ocelot, int port, u32 index,
-+		  struct tsn_cb_status *c)
-+{
-+	u32 val;
-+
-+	if (index >= capa.num_frer_ssid) {
-+		dev_err(ocelot->dev, "Invalid SSID %u, maximum:%u\n",
-+			index, capa.num_frer_ssid - 1);
-+		return -EINVAL;
-+	}
-+
-+	ocelot_write(ocelot,
-+		     ANA_TABLES_STREAMTIDX_S_INDEX(index),
-+		     ANA_TABLES_STREAMTIDX);
-+
-+	ocelot_write(ocelot,
-+		     ANA_TABLES_STREAMACCESS_STREAM_TBL_CMD(SFIDACCESS_CMD_READ),
-+		     ANA_TABLES_STREAMACCESS);
-+
-+	val = ocelot_read(ocelot, ANA_TABLES_STREAMACCESS);
-+	c->gen_rec = (ANA_TABLES_STREAMACCESS_GEN_REC_TYPE & val) >> 2;
-+	c->seq_num = ANA_TABLES_STREAMACCESS_GEN_REC_SEQ_NUM_X(val);
-+
-+	val = ocelot_read(ocelot, ANA_TABLES_STREAMTIDX);
-+	c->err = ANA_TABLES_STREAMTIDX_SEQ_GEN_ERR_STATUS_X(val);
-+	c->his_len = ANA_TABLES_STREAMTIDX_SEQ_HISTORY_LEN_X(val);
-+	c->seq_len = ANA_TABLES_STREAMTIDX_SEQ_SPACE_LOG2(val);
-+
-+	val = ocelot_read(ocelot, ANA_TABLES_SEQ_MASK);
-+	c->split_mask = ANA_TABLES_SEQ_MASK_SPLIT_MASK_X(val);
-+	c->iport_mask = ANA_TABLES_SEQ_MASK_INPUT_PORT_MASK(val);
-+
-+	c->seq_his = ocelot_read(ocelot, ANA_TABLES_SEQ_HISTORY);
-+
-+	return 0;
-+}
-+
-+int ocelot_pcp_map_enable(struct ocelot *ocelot, u8 port)
-+{
-+	int i;
-+
-+	ocelot_rmw_gix(ocelot,
-+		       ANA_PORT_QOS_CFG_QOS_PCP_ENA,
-+		       ANA_PORT_QOS_CFG_QOS_PCP_ENA,
-+		       ANA_PORT_QOS_CFG,
-+		       port);
-+
-+	for (i = 0; i < NUM_MSCC_QOS_PRIO * 2; i++) {
-+		ocelot_rmw_ix(ocelot,
-+			      (ANA_PORT_PCP_DEI_MAP_DP_PCP_DEI_VAL & i) |
-+			      ANA_PORT_PCP_DEI_MAP_QOS_PCP_DEI_VAL(i),
-+			      ANA_PORT_PCP_DEI_MAP_DP_PCP_DEI_VAL |
-+			      ANA_PORT_PCP_DEI_MAP_QOS_PCP_DEI_VAL_M,
-+			      ANA_PORT_PCP_DEI_MAP,
-+			      port, i);
-+	}
-+
-+	return 0;
-+}
-+
-+int ocelot_rtag_parse_enable(struct ocelot *ocelot, u8 port)
-+{
-+	ocelot_rmw_rix(ocelot,
-+		       ANA_PORT_MODE_REDTAG_PARSE_CFG,
-+		       ANA_PORT_MODE_REDTAG_PARSE_CFG,
-+		       ANA_PORT_MODE,
-+		       port);
-+
-+	return 0;
-+}
-+
-+int ocelot_dscp_set(struct ocelot *ocelot, int port,
-+		    bool enable, const u8 dscp_ix,
-+		    struct tsn_qos_switch_dscp_conf *c)
-+{
-+	u32 val, ri = dscp_ix;
-+
-+	c->dscp = 0;
-+	c->trust = 1;
-+	c->remark = 0;
-+
-+	if (dscp_ix > capa.qos_dscp_max) {
-+		dev_err(ocelot->dev, "Invalid dscp_ix %u\n", dscp_ix);
-+		return -EINVAL;
-+	}
-+	if (c->cos > capa.qos_cos_max) {
-+		dev_err(ocelot->dev, "Invalid cos %d\n", c->cos);
-+		return -EINVAL;
-+	}
-+	if (c->dpl > capa.qos_dp_max) {
-+		dev_err(ocelot->dev, "Invalid dpl %d\n", c->dpl);
-+		return -EINVAL;
-+	}
-+
-+	ocelot_rmw_gix(ocelot,
-+		       (enable ? ANA_PORT_QOS_CFG_QOS_DSCP_ENA : 0) |
-+		       (c->dscp ? ANA_PORT_QOS_CFG_DSCP_TRANSLATE_ENA : 0),
-+		       ANA_PORT_QOS_CFG_QOS_DSCP_ENA |
-+		       ANA_PORT_QOS_CFG_DSCP_TRANSLATE_ENA,
-+		       ANA_PORT_QOS_CFG,
-+		       port);
-+
-+	val = (c->dpl ? ANA_DSCP_CFG_DP_DSCP_VAL : 0) |
-+	       ANA_DSCP_CFG_QOS_DSCP_VAL(c->cos) |
-+	       ANA_DSCP_CFG_DSCP_TRANSLATE_VAL(c->dscp) |
-+	       (c->trust ? ANA_DSCP_CFG_DSCP_TRUST_ENA : 0) |
-+	       (c->remark ? ANA_DSCP_CFG_DSCP_REWR_ENA : 0);
-+
-+	ocelot_write_rix(ocelot, val, ANA_DSCP_CFG, ri);
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/mscc/ocelot_tsn.h
-@@ -0,0 +1,51 @@
-+/* SPDX-License-Identifier: (GPL-2.0 OR MIT)
-+ *
-+ * TSN_SWITCH driver
-+ *
-+ * Copyright 2018-2019 NXP
-+ */
-+
-+#ifndef _MSCC_OCELOT_SWITCH_TSN_H_
-+#define _MSCC_OCELOT_SWITCH_TSN_H_
-+
-+#define TRUE 1
-+#define FALSE 0
-+
-+struct mscc_switch_capa {
-+	u8 num_tas_gcl; /* Number of TAS Gate Control Lists */
-+	u32 tas_ct_min; /* Minimum supported TAS CycleTime in nS */
-+	u32 tas_ct_max; /* Maximum supported TAS CycleTime in nS */
-+	u32 tas_cte_max; /* Maximum supported TAS CycleTimeExtension in nS
-+			  */
-+	u32 tas_it_max;
-+	u32 tas_it_min;
-+	u8 num_hsch;
-+	u8 num_psfp_sfid;
-+	u8 num_frer_ssid;
-+	u8 num_psfp_sgid;
-+	u16 psfp_fmi_max;
-+	u16 psfp_fmi_min;
-+	u8 num_sgi_gcl;
-+	u32 sgi_ct_min;
-+	u32 sgi_ct_max;
-+	u32 sgi_cte_max;
-+	u16 qos_pol_max;
-+	u8 pol_cbs_max;
-+	u8 pol_pbs_max;
-+	u8 frer_seq_len_min;
-+	u8 frer_seq_len_max;
-+	u8 frer_his_len_min;
-+	u8 frer_his_len_max;
-+	u8 qos_dscp_max;
-+	u8 qos_cos_max;
-+	u8 qos_dp_max;
-+};
-+
-+static inline void ocelot_port_rmwl(struct ocelot_port *port, u32 val,
-+				    u32 mask, u32 reg)
-+{
-+	u32 cur = ocelot_port_readl(port, reg);
-+
-+	ocelot_port_writel(port, (cur & (~mask)) | val, reg);
-+}
-+#endif
---- a/include/soc/mscc/ocelot.h
-+++ b/include/soc/mscc/ocelot.h
-@@ -10,6 +10,7 @@
- #include <linux/if_vlan.h>
- #include <linux/regmap.h>
- #include <net/dsa.h>
-+#include <net/tsn.h>
- 
- #define IFH_INJ_BYPASS			BIT(31)
- #define IFH_INJ_POP_CNT_DISABLE		(3 << 28)
-@@ -328,6 +329,10 @@ enum ocelot_reg {
- 	PTP_CFG_MISC,
- 	PTP_CLK_CFG_ADJ_CFG,
- 	PTP_CLK_CFG_ADJ_FREQ,
-+	PTP_CUR_NSF,
-+	PTP_CUR_NSEC,
-+	PTP_CUR_SEC_LSB,
-+	PTP_CUR_SEC_MSB,
- 	GCB_SOFT_RST = GCB << TARGET_OFFSET,
- };
- 
-@@ -539,5 +544,50 @@ int ocelot_ptp_gettime64(struct ptp_cloc
- int ocelot_port_add_txtstamp_skb(struct ocelot_port *ocelot_port,
- 				 struct sk_buff *skb);
- void ocelot_get_txtstamp(struct ocelot *ocelot);
--
-+int ocelot_qbv_set(struct ocelot *ocelot, int port_id,
-+		   struct tsn_qbv_conf *shaper_config);
-+int ocelot_qbv_get(struct ocelot *ocelot, int port_id,
-+		   struct tsn_qbv_conf *shaper_config);
-+int ocelot_qbv_get_status(struct ocelot *ocelot, int port_id,
-+			  struct tsn_qbv_status *qbvstatus);
-+int ocelot_cut_thru_set(struct ocelot *ocelot, int port_id, u8 cut_thru);
-+int ocelot_cbs_set(struct ocelot *ocelot, int port, u8 tc, u8 bw);
-+int ocelot_cbs_get(struct ocelot *ocelot, int port, u8 tc);
-+int ocelot_qbu_set(struct ocelot *ocelot, int port, u8 preemptible);
-+int ocelot_qbu_get(struct ocelot *ocelot, int port,
-+		   struct tsn_preempt_status *c);
-+int ocelot_cb_streamid_get(struct ocelot *ocelot, int port, u32 index,
-+			   struct tsn_cb_streamid *streamid);
-+int ocelot_cb_streamid_set(struct ocelot *ocelot, int port, u32 index,
-+			   bool enable, struct tsn_cb_streamid *streamid);
-+int ocelot_qci_sfi_get(struct ocelot *ocelot, int port, u32 index,
-+		       struct tsn_qci_psfp_sfi_conf *sfi);
-+int ocelot_qci_sfi_set(struct ocelot *ocelot, int port, u32 index,
-+		       bool enable, struct tsn_qci_psfp_sfi_conf *sfi);
-+int ocelot_qci_sfi_counters_get(struct ocelot *ocelot, int port, u32 index,
-+			struct tsn_qci_psfp_sfi_counters *sfi_counters);
-+int ocelot_qci_max_cap_get(struct ocelot *ocelot,
-+			   struct tsn_qci_psfp_stream_param *stream_para);
-+int ocelot_qci_sgi_set(struct ocelot *ocelot, int port, u32 index,
-+		       struct tsn_qci_psfp_sgi_conf *sgi_conf);
-+int ocelot_qci_sgi_get(struct ocelot *ocelot, int port, u32 index,
-+		       struct tsn_qci_psfp_sgi_conf *sgi_conf);
-+int ocelot_qci_sgi_status_get(struct ocelot *ocelot, int port, u32 index,
-+			      struct tsn_psfp_sgi_status *sgi_status);
-+int ocelot_qci_fmi_set(struct ocelot *ocelot, int port, u32 index,
-+		       bool enable, struct tsn_qci_psfp_fmi *fmi);
-+int ocelot_qci_fmi_get(struct ocelot *ocelot, int port, u32 index,
-+		       struct tsn_qci_psfp_fmi *fmi,
-+		       struct tsn_qci_psfp_fmi_counters *counters);
-+int ocelot_seq_gen_set(struct ocelot *ocelot, int port, u32 index,
-+		       struct tsn_seq_gen_conf *sg_conf);
-+int ocelot_seq_rec_set(struct ocelot *ocelot, int port, u32 index,
-+		       struct tsn_seq_rec_conf *sr_conf);
-+int ocelot_cb_get(struct ocelot *ocelot, int port, u32 index,
-+		  struct tsn_cb_status *c);
-+int ocelot_pcp_map_enable(struct ocelot *ocelot, u8 port);
-+int ocelot_rtag_parse_enable(struct ocelot *ocelot, u8 port);
-+int ocelot_dscp_set(struct ocelot *ocelot, int port,
-+		    bool enable, const u8 dscp_ix,
-+		    struct tsn_qos_switch_dscp_conf *c);
- #endif
diff --git a/target/linux/layerscape/patches-5.4/701-net-0273-net-dsa-ocelot-add-tsn-support-for-felix-switch.patch b/target/linux/layerscape/patches-5.4/701-net-0273-net-dsa-ocelot-add-tsn-support-for-felix-switch.patch
deleted file mode 100644
index 72b101bfb0..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0273-net-dsa-ocelot-add-tsn-support-for-felix-switch.patch
+++ /dev/null
@@ -1,671 +0,0 @@
-From 36b446d44d66a6d6a072d3f5e87ebb05e0b88d98 Mon Sep 17 00:00:00 2001
-From: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
-Date: Fri, 29 Nov 2019 14:28:37 +0800
-Subject: [PATCH] net: dsa: ocelot: add tsn support for felix switch
-
-Support tsn capabilities in DSA felix switch driver. This felix tsn
-driver is using tsn configuration of ocelot, and registered on each
-switch port through DSA port setup.
-
-Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
----
- drivers/net/dsa/ocelot/Kconfig         |   8 +
- drivers/net/dsa/ocelot/Makefile        |   2 +
- drivers/net/dsa/ocelot/felix.c         |  50 ++++
- drivers/net/dsa/ocelot/felix_tsn.c     | 432 +++++++++++++++++++++++++++++++++
- drivers/net/dsa/ocelot/felix_tsn.h     |  61 +++++
- drivers/net/dsa/ocelot/felix_vsc9959.c |   8 +-
- include/net/dsa.h                      |   1 +
- net/dsa/dsa2.c                         |   4 +
- 8 files changed, 564 insertions(+), 2 deletions(-)
- create mode 100644 drivers/net/dsa/ocelot/felix_tsn.c
- create mode 100644 drivers/net/dsa/ocelot/felix_tsn.h
-
---- a/drivers/net/dsa/ocelot/Kconfig
-+++ b/drivers/net/dsa/ocelot/Kconfig
-@@ -9,3 +9,11 @@ config NET_DSA_MSCC_FELIX
- 	  the Vitesse / Microsemi / Microchip Ocelot family of switching cores.
- 	  It is embedded as a PCIe function of the NXP LS1028A ENETC integrated
- 	  endpoint.
-+
-+config MSCC_FELIX_SWITCH_TSN
-+	tristate "TSN on FELIX switch driver"
-+	depends on NET_DSA_MSCC_FELIX
-+	depends on TSN
-+	help
-+	  This driver supports TSN on felix switch.
-+
---- a/drivers/net/dsa/ocelot/Makefile
-+++ b/drivers/net/dsa/ocelot/Makefile
-@@ -4,3 +4,5 @@ obj-$(CONFIG_NET_DSA_MSCC_FELIX) += mscc
- mscc_felix-objs := \
- 	felix.o \
- 	felix_vsc9959.o
-+
-+obj-$(CONFIG_MSCC_FELIX_SWITCH_TSN) += felix_tsn.o
---- a/drivers/net/dsa/ocelot/felix.c
-+++ b/drivers/net/dsa/ocelot/felix.c
-@@ -9,6 +9,38 @@
- #include <linux/of.h>
- #include <net/dsa.h>
- #include "felix.h"
-+#include "felix_tsn.h"
-+
-+#ifdef CONFIG_MSCC_FELIX_SWITCH_TSN
-+const struct tsn_ops switch_tsn_ops = {
-+	.device_init			= felix_tsn_init,
-+	.get_capability                 = felix_tsn_get_cap,
-+	.qbv_set			= felix_qbv_set,
-+	.qbv_get			= felix_qbv_get,
-+	.qbv_get_status			= felix_qbv_get_status,
-+	.qbu_set			= felix_qbu_set,
-+	.qbu_get                        = felix_qbu_get,
-+	.cb_streamid_set		= felix_cb_streamid_set,
-+	.cb_streamid_get		= felix_cb_streamid_get,
-+	.cb_streamid_counters_get	= felix_cb_streamid_counters_get,
-+	.qci_sfi_set			= felix_qci_sfi_set,
-+	.qci_sfi_get			= felix_qci_sfi_get,
-+	.qci_sfi_counters_get		= felix_qci_sfi_counters_get,
-+	.qci_get_maxcap			= felix_qci_max_cap_get,
-+	.qci_sgi_set			= felix_qci_sgi_set,
-+	.qci_sgi_get			= felix_qci_sgi_get,
-+	.qci_sgi_status_get		= felix_qci_sgi_status_get,
-+	.qci_fmi_set			= felix_qci_fmi_set,
-+	.qci_fmi_get			= felix_qci_fmi_get,
-+	.cbs_set			= felix_cbs_set,
-+	.cbs_get			= felix_cbs_get,
-+	.ct_set				= felix_cut_thru_set,
-+	.cbgen_set			= felix_seq_gen_set,
-+	.cbrec_set			= felix_seq_rec_set,
-+	.cb_get				= felix_cb_get,
-+	.dscp_set			= felix_dscp_set,
-+};
-+#endif
- 
- static enum dsa_tag_protocol felix_get_tag_protocol(struct dsa_switch *ds,
- 						    int port)
-@@ -138,6 +170,21 @@ static int felix_vlan_del(struct dsa_swi
- 	return 0;
- }
- 
-+#ifdef CONFIG_MSCC_FELIX_SWITCH_TSN
-+static int felix_tsn_enable(struct dsa_port *dp)
-+{
-+	struct net_device *dev;
-+
-+	if (dp->type == DSA_PORT_TYPE_USER) {
-+		dev = dp->slave;
-+		tsn_port_register(dev,
-+				  (struct tsn_ops *)&switch_tsn_ops,
-+				  GROUP_OFFSET_SWITCH);
-+	}
-+	return 0;
-+}
-+#endif
-+
- static int felix_port_enable(struct dsa_switch *ds, int port,
- 			     struct phy_device *phy)
- {
-@@ -386,6 +433,9 @@ static const struct dsa_switch_ops felix
- 	.port_hwtstamp_set	= felix_hwtstamp_set,
- 	.port_rxtstamp		= felix_rxtstamp,
- 	.port_txtstamp		= felix_txtstamp,
-+#ifdef CONFIG_MSCC_FELIX_SWITCH_TSN
-+	.port_tsn_enable	= felix_tsn_enable,
-+#endif
- };
- 
- static struct felix_info *felix_instance_tbl[] = {
---- /dev/null
-+++ b/drivers/net/dsa/ocelot/felix_tsn.c
-@@ -0,0 +1,432 @@
-+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-+/* Felix Switch TSN driver
-+ *
-+ * Copyright 2018-2019 NXP
-+ */
-+
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <soc/mscc/ocelot.h>
-+#include <net/tsn.h>
-+#include "felix.h"
-+
-+static struct ocelot *felix_dev_to_ocelot(struct net_device *ndev)
-+{
-+	struct pci_dev *pdev;
-+	struct felix *felix;
-+
-+	pdev = list_entry(ndev->dev.parent, struct pci_dev, dev);
-+	felix = pci_get_drvdata(pdev);
-+	if (!felix)
-+		return NULL;
-+
-+	return &felix->ocelot;
-+}
-+
-+static int felix_dev_to_port(struct net_device *ndev, struct ocelot *ocelot)
-+{
-+	struct felix *felix = ocelot_to_felix(ocelot);
-+	struct dsa_switch *ds = felix->ds;
-+	struct dsa_port *dp;
-+	int i;
-+
-+	for (i = 0; i < ds->num_ports; i++) {
-+		dp = &ds->ports[i];
-+		if (dp->dn == ndev->dev.of_node)
-+			return dp->index;
-+	}
-+
-+	return -ENODEV;
-+}
-+
-+u32 felix_tsn_get_cap(struct net_device *ndev)
-+{
-+	u32 cap = 0;
-+
-+	cap = (TSN_CAP_QBV | TSN_CAP_QCI | TSN_CAP_QBU | TSN_CAP_CBS |
-+	       TSN_CAP_CB | TSN_CAP_TBS | TSN_CAP_CTH);
-+
-+	return cap;
-+}
-+
-+int felix_qbv_set(struct net_device *ndev,
-+		  struct tsn_qbv_conf *shaper_config)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_qbv_set(ocelot, port, shaper_config);
-+}
-+
-+int felix_qbv_get(struct net_device *ndev,
-+		  struct tsn_qbv_conf *shaper_config)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_qbv_get(ocelot, port, shaper_config);
-+}
-+
-+int felix_qbv_get_status(struct net_device *ndev,
-+			 struct tsn_qbv_status *qbvstatus)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_qbv_get_status(ocelot, port, qbvstatus);
-+}
-+
-+int felix_qbu_set(struct net_device *ndev, u8 preemptible)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_qbu_set(ocelot, port, preemptible);
-+}
-+
-+int felix_qbu_get(struct net_device *ndev, struct tsn_preempt_status *c)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_qbu_get(ocelot, port, c);
-+}
-+
-+int felix_cb_streamid_set(struct net_device *ndev, u32 index, bool enable,
-+			  struct tsn_cb_streamid *streamid)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_cb_streamid_set(ocelot, port, index, enable, streamid);
-+}
-+
-+int felix_cb_streamid_get(struct net_device *ndev, u32 index,
-+			  struct tsn_cb_streamid *streamid)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_cb_streamid_get(ocelot, port, index, streamid);
-+}
-+
-+int felix_cb_streamid_counters_get(struct net_device *ndev, u32 index,
-+				   struct tsn_cb_streamid_counters *sc)
-+{
-+	return 0;
-+}
-+
-+int felix_qci_sfi_set(struct net_device *ndev, u32 index, bool enable,
-+		      struct tsn_qci_psfp_sfi_conf *sfi)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_qci_sfi_set(ocelot, port, index, enable, sfi);
-+}
-+
-+int felix_qci_sfi_get(struct net_device *ndev, u32 index,
-+		      struct tsn_qci_psfp_sfi_conf *sfi)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_qci_sfi_get(ocelot, port, index, sfi);
-+}
-+
-+int felix_qci_sfi_counters_get(struct net_device *ndev, u32 index,
-+			       struct tsn_qci_psfp_sfi_counters *sfi_cnt)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_qci_sfi_counters_get(ocelot, port, index, sfi_cnt);
-+}
-+
-+int felix_qci_max_cap_get(struct net_device *ndev,
-+			  struct tsn_qci_psfp_stream_param *stream_para)
-+{
-+	struct ocelot *ocelot;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+
-+	return ocelot_qci_max_cap_get(ocelot, stream_para);
-+}
-+
-+int felix_qci_sgi_set(struct net_device *ndev, u32 index,
-+		      struct tsn_qci_psfp_sgi_conf *sgi_conf)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_qci_sgi_set(ocelot, port, index, sgi_conf);
-+}
-+
-+int felix_qci_sgi_get(struct net_device *ndev, u32 index,
-+		      struct tsn_qci_psfp_sgi_conf *sgi_conf)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_qci_sgi_get(ocelot, port, index, sgi_conf);
-+}
-+
-+int felix_qci_sgi_status_get(struct net_device *ndev, u32 index,
-+			     struct tsn_psfp_sgi_status *sgi_status)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_qci_sgi_status_get(ocelot, port, index, sgi_status);
-+}
-+
-+int felix_qci_fmi_set(struct net_device *ndev, u32 index,
-+		      bool enable, struct tsn_qci_psfp_fmi *fmi)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_qci_fmi_set(ocelot, port, index, enable, fmi);
-+}
-+
-+int felix_qci_fmi_get(struct net_device *ndev, u32 index,
-+		      struct tsn_qci_psfp_fmi *fmi,
-+		      struct tsn_qci_psfp_fmi_counters *counters)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_qci_fmi_get(ocelot, port, index, fmi, counters);
-+}
-+
-+int felix_cbs_set(struct net_device *ndev, u8 tc, u8 bw)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_cbs_set(ocelot, port, tc, bw);
-+}
-+
-+int felix_cbs_get(struct net_device *ndev, u8 tc)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_cbs_get(ocelot, port, tc);
-+}
-+
-+int felix_cut_thru_set(struct net_device *ndev, u8 cut_thru)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_cut_thru_set(ocelot, port, cut_thru);
-+}
-+
-+int felix_seq_gen_set(struct net_device *ndev, u32 index,
-+		      struct tsn_seq_gen_conf *sg_conf)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_seq_gen_set(ocelot, port, index, sg_conf);
-+}
-+
-+int felix_seq_rec_set(struct net_device *ndev, u32 index,
-+		      struct tsn_seq_rec_conf *sr_conf)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_seq_rec_set(ocelot, port, index, sr_conf);
-+}
-+
-+int felix_cb_get(struct net_device *ndev, u32 index,
-+		 struct tsn_cb_status *c)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_cb_get(ocelot, port, index, c);
-+}
-+
-+int felix_dscp_set(struct net_device *ndev, bool enable, const u8 dscp_ix,
-+		   struct tsn_qos_switch_dscp_conf *c)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return -ENODEV;
-+	port = felix_dev_to_port(ndev, ocelot);
-+	if (port < 0)
-+		return -ENODEV;
-+
-+	return ocelot_dscp_set(ocelot, port, enable, dscp_ix, c);
-+}
-+
-+void felix_tsn_init(struct net_device *ndev)
-+{
-+	struct ocelot *ocelot;
-+	int port;
-+
-+	ocelot = felix_dev_to_ocelot(ndev);
-+	if (!ocelot)
-+		return;
-+	port = felix_dev_to_port(ndev, ocelot);
-+
-+	ocelot_pcp_map_enable(ocelot, port);
-+	ocelot_rtag_parse_enable(ocelot, port);
-+}
---- /dev/null
-+++ b/drivers/net/dsa/ocelot/felix_tsn.h
-@@ -0,0 +1,61 @@
-+/* SPDX-License-Identifier: (GPL-2.0 OR MIT)
-+ *
-+ * TSN_SWITCH driver
-+ *
-+ * Copyright 2018-2019 NXP
-+ */
-+
-+#ifndef _MSCC_FELIX_SWITCH_TSN_H_
-+#define _MSCC_FELIX_SWITCH_TSN_H_
-+#include <net/tsn.h>
-+
-+u32 felix_tsn_get_cap(struct net_device *ndev);
-+int felix_qbv_set(struct net_device *ndev,
-+		  struct tsn_qbv_conf *shaper_config);
-+int felix_qbv_get(struct net_device *ndev,
-+		  struct tsn_qbv_conf *shaper_config);
-+int felix_qbv_get_status(struct net_device *ndev,
-+			 struct tsn_qbv_status *qbvstatus);
-+int felix_cut_thru_set(struct net_device *ndev, u8 cut_thru);
-+int felix_cbs_set(struct net_device *ndev, u8 tc, u8 bw);
-+int felix_cbs_get(struct net_device *ndev, u8 tc);
-+int felix_qbu_set(struct net_device *ndev, u8 preemptible);
-+int felix_qbu_get(struct net_device *ndev, struct tsn_preempt_status *c);
-+int felix_cb_streamid_get(struct net_device *ndev, u32 index,
-+			  struct tsn_cb_streamid *streamid);
-+int felix_cb_streamid_set(struct net_device *ndev, u32 index,
-+			  bool enable, struct tsn_cb_streamid *streamid);
-+int felix_cb_streamid_counters_get(struct net_device *ndev, u32 index,
-+				   struct tsn_cb_streamid_counters *sc);
-+int felix_qci_sfi_get(struct net_device *ndev, u32 index,
-+		      struct tsn_qci_psfp_sfi_conf *sfi);
-+int felix_qci_sfi_set(struct net_device *ndev, u32 index,
-+		      bool enable, struct tsn_qci_psfp_sfi_conf *sfi);
-+int felix_cb_streamid_counters_get(struct net_device *ndev, u32 index,
-+				   struct tsn_cb_streamid_counters *s_counters);
-+int felix_qci_sfi_counters_get(struct net_device *ndev, u32 index,
-+			       struct tsn_qci_psfp_sfi_counters *sfi_counters);
-+int felix_qci_max_cap_get(struct net_device *ndev,
-+			  struct tsn_qci_psfp_stream_param *stream_para);
-+int felix_qci_sgi_set(struct net_device *ndev, u32 index,
-+		      struct tsn_qci_psfp_sgi_conf *sgi_conf);
-+int felix_qci_sgi_get(struct net_device *ndev, u32 index,
-+		      struct tsn_qci_psfp_sgi_conf *sgi_conf);
-+int felix_qci_sgi_status_get(struct net_device *ndev, u16 index,
-+			     struct tsn_psfp_sgi_status *sgi_status);
-+int felix_qci_fmi_set(struct net_device *ndev, u32 index,
-+		      bool enable, struct tsn_qci_psfp_fmi *fmi);
-+int felix_qci_fmi_get(struct net_device *ndev, u32 index,
-+		      struct tsn_qci_psfp_fmi *fmi,
-+		      struct tsn_qci_psfp_fmi_counters *counters);
-+int felix_seq_gen_set(struct net_device *ndev, u32 index,
-+		      struct tsn_seq_gen_conf *sg_conf);
-+int felix_seq_rec_set(struct net_device *ndev, u32 index,
-+		      struct tsn_seq_rec_conf *sr_conf);
-+int felix_cb_get(struct net_device *ndev, u32 index,
-+		 struct tsn_cb_status  *c);
-+int felix_dscp_set(struct net_device *ndev, bool enable, const u8 dscp_ix,
-+		   struct tsn_qos_switch_dscp_conf *c);
-+
-+void felix_tsn_init(struct net_device *ndev);
-+#endif
---- a/drivers/net/dsa/ocelot/felix_vsc9959.c
-+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
-@@ -176,7 +176,7 @@ static const u32 vsc9959_qsys_regmap[] =
- 	REG(QSYS_QMAXSDU_CFG_6,			0x00f62c),
- 	REG(QSYS_QMAXSDU_CFG_7,			0x00f648),
- 	REG(QSYS_PREEMPTION_CFG,		0x00f664),
--	REG_RESERVED(QSYS_CIR_CFG),
-+	REG(QSYS_CIR_CFG,			0x000000),
- 	REG(QSYS_EIR_CFG,			0x000004),
- 	REG(QSYS_SE_CFG,			0x000008),
- 	REG(QSYS_SE_DWRR_CFG,			0x00000c),
-@@ -269,7 +269,7 @@ static const u32 vsc9959_sys_regmap[] =
- 	REG_RESERVED(SYS_MMGT_FAST),
- 	REG_RESERVED(SYS_EVENTS_DIF),
- 	REG_RESERVED(SYS_EVENTS_CORE),
--	REG_RESERVED(SYS_CNT),
-+	REG(SYS_CNT,				0x000000),
- 	REG(SYS_PTP_STATUS,			0x000f14),
- 	REG(SYS_PTP_TXSTAMP,			0x000f18),
- 	REG(SYS_PTP_NXT,			0x000f1c),
-@@ -290,6 +290,10 @@ static const u32 vsc9959_ptp_regmap[] =
- 	REG(PTP_CFG_MISC,                  0x0000a0),
- 	REG(PTP_CLK_CFG_ADJ_CFG,           0x0000a4),
- 	REG(PTP_CLK_CFG_ADJ_FREQ,          0x0000a8),
-+	REG(PTP_CUR_NSF,                   0x0000bc),
-+	REG(PTP_CUR_NSEC,                  0x0000c0),
-+	REG(PTP_CUR_SEC_LSB,               0x0000c4),
-+	REG(PTP_CUR_SEC_MSB,               0x0000c8),
- };
- 
- static const u32 vsc9959_gcb_regmap[] = {
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -559,6 +559,7 @@ struct dsa_switch_ops {
- 	 */
- 	netdev_tx_t (*port_deferred_xmit)(struct dsa_switch *ds, int port,
- 					  struct sk_buff *skb);
-+	int	(*port_tsn_enable)(struct dsa_port *dp);
- };
- 
- struct dsa_switch_driver {
---- a/net/dsa/dsa2.c
-+++ b/net/dsa/dsa2.c
-@@ -323,6 +323,10 @@ static int dsa_port_setup(struct dsa_por
- 		if (err)
- 			break;
- 
-+		/* Enable TSN function on switch port */
-+		if (ds->ops->port_tsn_enable)
-+			ds->ops->port_tsn_enable(dp);
-+
- 		devlink_port_type_eth_set(dlp, dp->slave);
- 		break;
- 	}
diff --git a/target/linux/layerscape/patches-5.4/701-net-0274-net-dsa-ocelot-alloc-memory-for-dsa-switch-instance.patch b/target/linux/layerscape/patches-5.4/701-net-0274-net-dsa-ocelot-alloc-memory-for-dsa-switch-instance.patch
deleted file mode 100644
index 97e6f9d515..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0274-net-dsa-ocelot-alloc-memory-for-dsa-switch-instance.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From a9848cf13f495e12c55a01d437120efbb70ed747 Mon Sep 17 00:00:00 2001
-From: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
-Date: Fri, 29 Nov 2019 15:48:20 +0800
-Subject: [PATCH] net: dsa: ocelot: alloc memory for dsa switch instance
-
-The dsa switch instance hasn't alloc memory for switch ports in felix
-initialization driver, which will cause NULL pointer issue. Using
-dsa_switch_alloc to alloc memory for dsa switch instance.
-
-Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
----
- drivers/net/dsa/ocelot/felix.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/dsa/ocelot/felix.c
-+++ b/drivers/net/dsa/ocelot/felix.c
-@@ -510,7 +510,7 @@ static int felix_pci_probe(struct pci_de
- 
- 	ocelot->ptp = 1;
- 
--	ds = kzalloc(sizeof(struct dsa_switch), GFP_KERNEL);
-+	ds = dsa_switch_alloc(&pdev->dev, felix->info->num_ports);
- 	if (!ds) {
- 		err = -ENOMEM;
- 		dev_err(&pdev->dev, "Failed to allocate DSA switch\n");
diff --git a/target/linux/layerscape/patches-5.4/701-net-0284-net-fsl_ppfe-dts-binding-for-ppfe.patch b/target/linux/layerscape/patches-5.4/701-net-0284-net-fsl_ppfe-dts-binding-for-ppfe.patch
deleted file mode 100644
index 6659f9b67f..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0284-net-fsl_ppfe-dts-binding-for-ppfe.patch
+++ /dev/null
@@ -1,188 +0,0 @@
-From 08861b67c94a28e3a1bbcfb04a141ab0eafa5dac Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Sat, 16 Sep 2017 07:05:49 +0530
-Subject: [PATCH] net: fsl_ppfe: dts binding for ppfe
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
----
- .../devicetree/bindings/net/fsl_ppfe/pfe.txt       | 173 +++++++++++++++++++++
- 1 file changed, 173 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
-@@ -0,0 +1,173 @@
-+=============================================================================
-+NXP Programmable Packet Forwarding Engine Device Bindings
-+
-+CONTENTS
-+  - PFE Node
-+  - Ethernet Node
-+
-+=============================================================================
-+PFE Node
-+
-+DESCRIPTION
-+
-+PFE Node has all the properties associated with Packet Forwarding Engine block.
-+
-+PROPERTIES
-+
-+- compatible
-+		Usage: required
-+		Value type: <stringlist>
-+		Definition: Must include "fsl,pfe"
-+
-+- reg
-+		Usage: required
-+		Value type: <prop-encoded-array>
-+		Definition: A standard property.
-+		Specifies the offset of the following registers:
-+		- PFE configuration registers
-+		- DDR memory used by PFE
-+
-+- fsl,pfe-num-interfaces
-+		Usage: required
-+		Value type: <u32>
-+		Definition: Must be present. Value can be either one or two.
-+
-+- interrupts
-+		Usage: required
-+		Value type: <prop-encoded-array>
-+		Definition: Three interrupts are specified in this property.
-+		- HIF interrupt
-+		- HIF NO COPY interrupt
-+		- Wake On LAN interrupt
-+
-+- interrupt-names
-+		Usage: required
-+		Value type: <stringlist>
-+		Definition: Following strings are defined for the 3 interrupts.
-+		"pfe_hif" - HIF interrupt
-+		"pfe_hif_nocpy" - HIF NO COPY interrupt
-+		"pfe_wol" - Wake On LAN interrupt
-+
-+- memory-region
-+		Usage: required
-+		Value type: <phandle>
-+		Definition: phandle to a node describing reserved memory used by pfe.
-+		Refer:- Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
-+
-+- fsl,pfe-scfg
-+		Usage: required
-+		Value type: <phandle>
-+		Definition: phandle for scfg.
-+
-+- fsl,rcpm-wakeup
-+		Usage: required
-+		Value type: <phandle>
-+		Definition: phandle for rcpm.
-+
-+- clocks
-+		Usage: required
-+		Value type: <phandle>
-+		Definition: phandle for clockgen.
-+
-+- clock-names
-+		Usage: required
-+		Value type: <string>
-+		Definition: phandle for clock name.
-+
-+EXAMPLE
-+
-+pfe: pfe@04000000 {
-+	compatible = "fsl,pfe";
-+	reg =   <0x0 0x04000000 0x0 0xc00000>,	/* AXI 16M */
-+		<0x0 0x83400000 0x0 0xc00000>;  /* PFE DDR 12M */
-+	reg-names = "pfe", "pfe-ddr";
-+	fsl,pfe-num-interfaces = <0x2>;
-+	interrupts = <0 172 0x4>,    /* HIF interrupt */
-+		     <0 173 0x4>,    /*HIF_NOCPY interrupt */
-+		     <0 174 0x4>;    /* WoL interrupt */
-+	interrupt-names = "pfe_hif", "pfe_hif_nocpy", "pfe_wol";
-+	memory-region = <&pfe_reserved>;
-+	fsl,pfe-scfg = <&scfg 0>;
-+	fsl,rcpm-wakeup = <&rcpm 0xf0000020>;
-+	clocks = <&clockgen 4 0>;
-+	clock-names = "pfe";
-+
-+	status = "okay";
-+	pfe_mac0: ethernet@0 {
-+	};
-+
-+	pfe_mac1: ethernet@1 {
-+	};
-+};
-+
-+=============================================================================
-+Ethernet Node
-+
-+DESCRIPTION
-+
-+Ethernet Node has all the properties associated with PFE used by platforms to
-+connect to PHY:
-+
-+PROPERTIES
-+
-+- compatible
-+		Usage: required
-+		Value type: <stringlist>
-+		Definition: Must include "fsl,pfe-gemac-port"
-+
-+- reg
-+		Usage: required
-+		Value type: <prop-encoded-array>
-+		Definition: A standard property.
-+		Specifies the gemacid of the interface.
-+
-+- fsl,gemac-bus-id
-+		Usage: required
-+		Value type: <u32>
-+		Definition: Must be present. Value should be the id of the bus
-+		connected to gemac.
-+
-+- fsl,gemac-phy-id
-+		Usage: required
-+		Value type: <u32>
-+		Definition: Must be present. Value should be the id of the phy
-+		connected to gemac.
-+
-+- fsl,mdio-mux-val
-+		Usage: required
-+		Value type: <u32>
-+		Definition: Must be present. Value can be either 0 or 2 or 3.
-+		This value is used to configure the mux to enable mdio.
-+
-+- phy-mode
-+		Usage: required
-+		Value type: <string>
-+		Definition: Must include "sgmii"
-+
-+- fsl,pfe-phy-if-flags
-+		Usage: required
-+		Value type: <u32>
-+		Definition: Must be present. Value should be 0 by default.
-+		If there is not phy connected, this need to be 1.
-+
-+- mdio
-+		optional subnode that specifies the mdio bus. This has reg
-+		property which is used to enable/disable the mdio bus.
-+
-+EXAMPLE
-+
-+ethernet@0 {
-+	compatible = "fsl,pfe-gemac-port";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	reg = <0x0>;	/* GEM_ID */
-+	fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
-+	fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
-+	fsl,mdio-mux-val = <0x0>;
-+	phy-mode = "sgmii";
-+	fsl,pfe-phy-if-flags = <0x0>;
-+
-+	mdio@0 {
-+		reg = <0x1>; /* enabled/disabled */
-+	};
-+};
diff --git a/target/linux/layerscape/patches-5.4/701-net-0285-staging-fsl_ppfe-eth-header-files-for-pfe-driver.patch b/target/linux/layerscape/patches-5.4/701-net-0285-staging-fsl_ppfe-eth-header-files-for-pfe-driver.patch
deleted file mode 100644
index b513786910..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0285-staging-fsl_ppfe-eth-header-files-for-pfe-driver.patch
+++ /dev/null
@@ -1,2622 +0,0 @@
-From d9bd3a5f795f45fd6847f080231e1e760004dca9 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Sat, 16 Sep 2017 14:21:37 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: header files for pfe driver
-
-This patch has all pfe header files.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
----
- drivers/staging/fsl_ppfe/include/pfe/cbus.h        |  78 +++++
- drivers/staging/fsl_ppfe/include/pfe/cbus/bmu.h    |  55 +++
- .../staging/fsl_ppfe/include/pfe/cbus/class_csr.h  | 289 ++++++++++++++++
- .../staging/fsl_ppfe/include/pfe/cbus/emac_mtip.h  | 242 ++++++++++++++
- drivers/staging/fsl_ppfe/include/pfe/cbus/gpi.h    |  86 +++++
- drivers/staging/fsl_ppfe/include/pfe/cbus/hif.h    | 100 ++++++
- .../staging/fsl_ppfe/include/pfe/cbus/hif_nocpy.h  |  50 +++
- .../staging/fsl_ppfe/include/pfe/cbus/tmu_csr.h    | 168 ++++++++++
- .../staging/fsl_ppfe/include/pfe/cbus/util_csr.h   |  61 ++++
- drivers/staging/fsl_ppfe/include/pfe/pfe.h         | 372 +++++++++++++++++++++
- drivers/staging/fsl_ppfe/pfe_ctrl.h                | 112 +++++++
- drivers/staging/fsl_ppfe/pfe_debugfs.h             |  25 ++
- drivers/staging/fsl_ppfe/pfe_eth.h                 | 184 ++++++++++
- drivers/staging/fsl_ppfe/pfe_firmware.h            |  32 ++
- drivers/staging/fsl_ppfe/pfe_hif.h                 | 211 ++++++++++++
- drivers/staging/fsl_ppfe/pfe_hif_lib.h             | 239 +++++++++++++
- drivers/staging/fsl_ppfe/pfe_hw.h                  |  27 ++
- drivers/staging/fsl_ppfe/pfe_mod.h                 | 112 +++++++
- drivers/staging/fsl_ppfe/pfe_perfmon.h             |  38 +++
- drivers/staging/fsl_ppfe/pfe_sysfs.h               |  29 ++
- 20 files changed, 2510 insertions(+)
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/bmu.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/class_csr.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/emac_mtip.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/gpi.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/hif.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/hif_nocpy.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/tmu_csr.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/util_csr.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/pfe.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_ctrl.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_debugfs.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_eth.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_firmware.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_hif.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_hif_lib.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_hw.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_mod.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_perfmon.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_sysfs.h
-
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus.h
-@@ -0,0 +1,78 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _CBUS_H_
-+#define _CBUS_H_
-+
-+#define EMAC1_BASE_ADDR	(CBUS_BASE_ADDR + 0x200000)
-+#define EGPI1_BASE_ADDR	(CBUS_BASE_ADDR + 0x210000)
-+#define EMAC2_BASE_ADDR	(CBUS_BASE_ADDR + 0x220000)
-+#define EGPI2_BASE_ADDR	(CBUS_BASE_ADDR + 0x230000)
-+#define BMU1_BASE_ADDR	(CBUS_BASE_ADDR + 0x240000)
-+#define BMU2_BASE_ADDR	(CBUS_BASE_ADDR + 0x250000)
-+#define ARB_BASE_ADDR	(CBUS_BASE_ADDR + 0x260000)
-+#define DDR_CONFIG_BASE_ADDR	(CBUS_BASE_ADDR + 0x270000)
-+#define HIF_BASE_ADDR	(CBUS_BASE_ADDR + 0x280000)
-+#define HGPI_BASE_ADDR	(CBUS_BASE_ADDR + 0x290000)
-+#define LMEM_BASE_ADDR	(CBUS_BASE_ADDR + 0x300000)
-+#define LMEM_SIZE	0x10000
-+#define LMEM_END	(LMEM_BASE_ADDR + LMEM_SIZE)
-+#define TMU_CSR_BASE_ADDR	(CBUS_BASE_ADDR + 0x310000)
-+#define CLASS_CSR_BASE_ADDR	(CBUS_BASE_ADDR + 0x320000)
-+#define HIF_NOCPY_BASE_ADDR	(CBUS_BASE_ADDR + 0x350000)
-+#define UTIL_CSR_BASE_ADDR	(CBUS_BASE_ADDR + 0x360000)
-+#define CBUS_GPT_BASE_ADDR	(CBUS_BASE_ADDR + 0x370000)
-+
-+/*
-+ * defgroup XXX_MEM_ACCESS_ADDR PE memory access through CSR
-+ * XXX_MEM_ACCESS_ADDR register bit definitions.
-+ */
-+#define PE_MEM_ACCESS_WRITE	BIT(31)	/* Internal Memory Write. */
-+#define PE_MEM_ACCESS_IMEM	BIT(15)
-+#define PE_MEM_ACCESS_DMEM	BIT(16)
-+
-+/* Byte Enables of the Internal memory access. These are interpred in BE */
-+#define PE_MEM_ACCESS_BYTE_ENABLE(offset, size)	\
-+	({ typeof(size) size_ = (size);		\
-+	(((BIT(size_) - 1) << (4 - (offset) - (size_))) & 0xf) << 24; })
-+
-+#include "cbus/emac_mtip.h"
-+#include "cbus/gpi.h"
-+#include "cbus/bmu.h"
-+#include "cbus/hif.h"
-+#include "cbus/tmu_csr.h"
-+#include "cbus/class_csr.h"
-+#include "cbus/hif_nocpy.h"
-+#include "cbus/util_csr.h"
-+
-+/* PFE cores states */
-+#define CORE_DISABLE	0x00000000
-+#define CORE_ENABLE	0x00000001
-+#define CORE_SW_RESET	0x00000002
-+
-+/* LMEM defines */
-+#define LMEM_HDR_SIZE	0x0010
-+#define LMEM_BUF_SIZE_LN2	0x7
-+#define LMEM_BUF_SIZE	BIT(LMEM_BUF_SIZE_LN2)
-+
-+/* DDR defines */
-+#define DDR_HDR_SIZE	0x0100
-+#define DDR_BUF_SIZE_LN2	0xb
-+#define DDR_BUF_SIZE	BIT(DDR_BUF_SIZE_LN2)
-+
-+#endif /* _CBUS_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/bmu.h
-@@ -0,0 +1,55 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _BMU_H_
-+#define _BMU_H_
-+
-+#define BMU_VERSION	0x000
-+#define BMU_CTRL	0x004
-+#define BMU_UCAST_CONFIG	0x008
-+#define BMU_UCAST_BASE_ADDR	0x00c
-+#define BMU_BUF_SIZE	0x010
-+#define BMU_BUF_CNT	0x014
-+#define BMU_THRES	0x018
-+#define BMU_INT_SRC	0x020
-+#define BMU_INT_ENABLE	0x024
-+#define BMU_ALLOC_CTRL	0x030
-+#define BMU_FREE_CTRL	0x034
-+#define BMU_FREE_ERR_ADDR	0x038
-+#define BMU_CURR_BUF_CNT	0x03c
-+#define BMU_MCAST_CNT	0x040
-+#define BMU_MCAST_ALLOC_CTRL	0x044
-+#define BMU_REM_BUF_CNT	0x048
-+#define BMU_LOW_WATERMARK	0x050
-+#define BMU_HIGH_WATERMARK	0x054
-+#define BMU_INT_MEM_ACCESS	0x100
-+
-+struct BMU_CFG {
-+	unsigned long baseaddr;
-+	u32 count;
-+	u32 size;
-+	u32 low_watermark;
-+	u32 high_watermark;
-+};
-+
-+#define BMU1_BUF_SIZE	LMEM_BUF_SIZE_LN2
-+#define BMU2_BUF_SIZE	DDR_BUF_SIZE_LN2
-+
-+#define BMU2_MCAST_ALLOC_CTRL	(BMU2_BASE_ADDR + BMU_MCAST_ALLOC_CTRL)
-+
-+#endif /* _BMU_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/class_csr.h
-@@ -0,0 +1,289 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _CLASS_CSR_H_
-+#define _CLASS_CSR_H_
-+
-+/* @file class_csr.h.
-+ * class_csr - block containing all the classifier control and status register.
-+ * Mapped on CBUS and accessible from all PE's and ARM.
-+ */
-+#define CLASS_VERSION	(CLASS_CSR_BASE_ADDR + 0x000)
-+#define CLASS_TX_CTRL	(CLASS_CSR_BASE_ADDR + 0x004)
-+#define CLASS_INQ_PKTPTR	(CLASS_CSR_BASE_ADDR + 0x010)
-+
-+/* (ddr_hdr_size[24:16], lmem_hdr_size[5:0]) */
-+#define CLASS_HDR_SIZE	(CLASS_CSR_BASE_ADDR + 0x014)
-+
-+/* LMEM header size for the Classifier block.\ Data in the LMEM
-+ * is written from this offset.
-+ */
-+#define CLASS_HDR_SIZE_LMEM(off)	((off) & 0x3f)
-+
-+/* DDR header size for the Classifier block.\ Data in the DDR
-+ * is written from this offset.
-+ */
-+#define CLASS_HDR_SIZE_DDR(off)	(((off) & 0x1ff) << 16)
-+
-+#define CLASS_PE0_QB_DM_ADDR0	(CLASS_CSR_BASE_ADDR + 0x020)
-+
-+/* DMEM address of first [15:0] and second [31:16] buffers on QB side. */
-+#define CLASS_PE0_QB_DM_ADDR1	(CLASS_CSR_BASE_ADDR + 0x024)
-+
-+/* DMEM address of third [15:0] and fourth [31:16] buffers on QB side. */
-+#define CLASS_PE0_RO_DM_ADDR0	(CLASS_CSR_BASE_ADDR + 0x060)
-+
-+/* DMEM address of first [15:0] and second [31:16] buffers on RO side. */
-+#define CLASS_PE0_RO_DM_ADDR1	(CLASS_CSR_BASE_ADDR + 0x064)
-+
-+/* DMEM address of third [15:0] and fourth [31:16] buffers on RO side. */
-+
-+/* @name Class PE memory access. Allows external PE's and HOST to
-+ * read/write PMEM/DMEM memory ranges for each classifier PE.
-+ */
-+/* {sr_pe_mem_cmd[31], csr_pe_mem_wren[27:24], csr_pe_mem_addr[23:0]},
-+ * See \ref XXX_MEM_ACCESS_ADDR for details.
-+ */
-+#define CLASS_MEM_ACCESS_ADDR	(CLASS_CSR_BASE_ADDR + 0x100)
-+
-+/* Internal Memory Access Write Data [31:0] */
-+#define CLASS_MEM_ACCESS_WDATA	(CLASS_CSR_BASE_ADDR + 0x104)
-+
-+/* Internal Memory Access Read Data [31:0] */
-+#define CLASS_MEM_ACCESS_RDATA	(CLASS_CSR_BASE_ADDR + 0x108)
-+#define CLASS_TM_INQ_ADDR	(CLASS_CSR_BASE_ADDR + 0x114)
-+#define CLASS_PE_STATUS	(CLASS_CSR_BASE_ADDR + 0x118)
-+
-+#define CLASS_PHY1_RX_PKTS	(CLASS_CSR_BASE_ADDR + 0x11c)
-+#define CLASS_PHY1_TX_PKTS	(CLASS_CSR_BASE_ADDR + 0x120)
-+#define CLASS_PHY1_LP_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x124)
-+#define CLASS_PHY1_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x128)
-+#define CLASS_PHY1_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x12c)
-+#define CLASS_PHY1_L3_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x130)
-+#define CLASS_PHY1_V4_PKTS	(CLASS_CSR_BASE_ADDR + 0x134)
-+#define CLASS_PHY1_V6_PKTS	(CLASS_CSR_BASE_ADDR + 0x138)
-+#define CLASS_PHY1_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x13c)
-+#define CLASS_PHY1_TTL_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x140)
-+#define CLASS_PHY2_RX_PKTS	(CLASS_CSR_BASE_ADDR + 0x144)
-+#define CLASS_PHY2_TX_PKTS	(CLASS_CSR_BASE_ADDR + 0x148)
-+#define CLASS_PHY2_LP_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x14c)
-+#define CLASS_PHY2_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x150)
-+#define CLASS_PHY2_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x154)
-+#define CLASS_PHY2_L3_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x158)
-+#define CLASS_PHY2_V4_PKTS	(CLASS_CSR_BASE_ADDR + 0x15c)
-+#define CLASS_PHY2_V6_PKTS	(CLASS_CSR_BASE_ADDR + 0x160)
-+#define CLASS_PHY2_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x164)
-+#define CLASS_PHY2_TTL_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x168)
-+#define CLASS_PHY3_RX_PKTS	(CLASS_CSR_BASE_ADDR + 0x16c)
-+#define CLASS_PHY3_TX_PKTS	(CLASS_CSR_BASE_ADDR + 0x170)
-+#define CLASS_PHY3_LP_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x174)
-+#define CLASS_PHY3_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x178)
-+#define CLASS_PHY3_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x17c)
-+#define CLASS_PHY3_L3_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x180)
-+#define CLASS_PHY3_V4_PKTS	(CLASS_CSR_BASE_ADDR + 0x184)
-+#define CLASS_PHY3_V6_PKTS	(CLASS_CSR_BASE_ADDR + 0x188)
-+#define CLASS_PHY3_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x18c)
-+#define CLASS_PHY3_TTL_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x190)
-+#define CLASS_PHY1_ICMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x194)
-+#define CLASS_PHY1_IGMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x198)
-+#define CLASS_PHY1_TCP_PKTS	(CLASS_CSR_BASE_ADDR + 0x19c)
-+#define CLASS_PHY1_UDP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1a0)
-+#define CLASS_PHY2_ICMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1a4)
-+#define CLASS_PHY2_IGMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1a8)
-+#define CLASS_PHY2_TCP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1ac)
-+#define CLASS_PHY2_UDP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1b0)
-+#define CLASS_PHY3_ICMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1b4)
-+#define CLASS_PHY3_IGMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1b8)
-+#define CLASS_PHY3_TCP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1bc)
-+#define CLASS_PHY3_UDP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1c0)
-+#define CLASS_PHY4_ICMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1c4)
-+#define CLASS_PHY4_IGMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1c8)
-+#define CLASS_PHY4_TCP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1cc)
-+#define CLASS_PHY4_UDP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1d0)
-+#define CLASS_PHY4_RX_PKTS	(CLASS_CSR_BASE_ADDR + 0x1d4)
-+#define CLASS_PHY4_TX_PKTS	(CLASS_CSR_BASE_ADDR + 0x1d8)
-+#define CLASS_PHY4_LP_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x1dc)
-+#define CLASS_PHY4_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x1e0)
-+#define CLASS_PHY4_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x1e4)
-+#define CLASS_PHY4_L3_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x1e8)
-+#define CLASS_PHY4_V4_PKTS	(CLASS_CSR_BASE_ADDR + 0x1ec)
-+#define CLASS_PHY4_V6_PKTS	(CLASS_CSR_BASE_ADDR + 0x1f0)
-+#define CLASS_PHY4_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x1f4)
-+#define CLASS_PHY4_TTL_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x1f8)
-+
-+#define CLASS_PE_SYS_CLK_RATIO	(CLASS_CSR_BASE_ADDR + 0x200)
-+#define CLASS_AFULL_THRES	(CLASS_CSR_BASE_ADDR + 0x204)
-+#define CLASS_GAP_BETWEEN_READS	(CLASS_CSR_BASE_ADDR + 0x208)
-+#define CLASS_MAX_BUF_CNT	(CLASS_CSR_BASE_ADDR + 0x20c)
-+#define CLASS_TSQ_FIFO_THRES	(CLASS_CSR_BASE_ADDR + 0x210)
-+#define CLASS_TSQ_MAX_CNT	(CLASS_CSR_BASE_ADDR + 0x214)
-+#define CLASS_IRAM_DATA_0	(CLASS_CSR_BASE_ADDR + 0x218)
-+#define CLASS_IRAM_DATA_1	(CLASS_CSR_BASE_ADDR + 0x21c)
-+#define CLASS_IRAM_DATA_2	(CLASS_CSR_BASE_ADDR + 0x220)
-+#define CLASS_IRAM_DATA_3	(CLASS_CSR_BASE_ADDR + 0x224)
-+
-+#define CLASS_BUS_ACCESS_ADDR	(CLASS_CSR_BASE_ADDR + 0x228)
-+
-+#define CLASS_BUS_ACCESS_WDATA	(CLASS_CSR_BASE_ADDR + 0x22c)
-+#define CLASS_BUS_ACCESS_RDATA	(CLASS_CSR_BASE_ADDR + 0x230)
-+
-+/* (route_entry_size[9:0], route_hash_size[23:16]
-+ * (this is actually ln2(size)))
-+ */
-+#define CLASS_ROUTE_HASH_ENTRY_SIZE	(CLASS_CSR_BASE_ADDR + 0x234)
-+
-+#define CLASS_ROUTE_ENTRY_SIZE(size)	 ((size) & 0x1ff)
-+#define CLASS_ROUTE_HASH_SIZE(hash_bits) (((hash_bits) & 0xff) << 16)
-+
-+#define CLASS_ROUTE_TABLE_BASE	(CLASS_CSR_BASE_ADDR + 0x238)
-+
-+#define CLASS_ROUTE_MULTI	(CLASS_CSR_BASE_ADDR + 0x23c)
-+#define CLASS_SMEM_OFFSET	(CLASS_CSR_BASE_ADDR + 0x240)
-+#define CLASS_LMEM_BUF_SIZE	(CLASS_CSR_BASE_ADDR + 0x244)
-+#define CLASS_VLAN_ID	(CLASS_CSR_BASE_ADDR + 0x248)
-+#define CLASS_BMU1_BUF_FREE	(CLASS_CSR_BASE_ADDR + 0x24c)
-+#define CLASS_USE_TMU_INQ	(CLASS_CSR_BASE_ADDR + 0x250)
-+#define CLASS_VLAN_ID1	(CLASS_CSR_BASE_ADDR + 0x254)
-+
-+#define CLASS_BUS_ACCESS_BASE	(CLASS_CSR_BASE_ADDR + 0x258)
-+#define CLASS_BUS_ACCESS_BASE_MASK	(0xFF000000)
-+/* bit 31:24 of PE peripheral address are stored in CLASS_BUS_ACCESS_BASE */
-+
-+#define CLASS_HIF_PARSE	(CLASS_CSR_BASE_ADDR + 0x25c)
-+
-+#define CLASS_HOST_PE0_GP	(CLASS_CSR_BASE_ADDR + 0x260)
-+#define CLASS_PE0_GP	(CLASS_CSR_BASE_ADDR + 0x264)
-+#define CLASS_HOST_PE1_GP	(CLASS_CSR_BASE_ADDR + 0x268)
-+#define CLASS_PE1_GP	(CLASS_CSR_BASE_ADDR + 0x26c)
-+#define CLASS_HOST_PE2_GP	(CLASS_CSR_BASE_ADDR + 0x270)
-+#define CLASS_PE2_GP	(CLASS_CSR_BASE_ADDR + 0x274)
-+#define CLASS_HOST_PE3_GP	(CLASS_CSR_BASE_ADDR + 0x278)
-+#define CLASS_PE3_GP	(CLASS_CSR_BASE_ADDR + 0x27c)
-+#define CLASS_HOST_PE4_GP	(CLASS_CSR_BASE_ADDR + 0x280)
-+#define CLASS_PE4_GP	(CLASS_CSR_BASE_ADDR + 0x284)
-+#define CLASS_HOST_PE5_GP	(CLASS_CSR_BASE_ADDR + 0x288)
-+#define CLASS_PE5_GP	(CLASS_CSR_BASE_ADDR + 0x28c)
-+
-+#define CLASS_PE_INT_SRC	(CLASS_CSR_BASE_ADDR + 0x290)
-+#define CLASS_PE_INT_ENABLE	(CLASS_CSR_BASE_ADDR + 0x294)
-+
-+#define CLASS_TPID0_TPID1	(CLASS_CSR_BASE_ADDR + 0x298)
-+#define CLASS_TPID2	(CLASS_CSR_BASE_ADDR + 0x29c)
-+
-+#define CLASS_L4_CHKSUM_ADDR	(CLASS_CSR_BASE_ADDR + 0x2a0)
-+
-+#define CLASS_PE0_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2a4)
-+#define CLASS_PE1_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2a8)
-+#define CLASS_PE2_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2ac)
-+#define CLASS_PE3_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2b0)
-+#define CLASS_PE4_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2b4)
-+#define CLASS_PE5_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2b8)
-+
-+#define CLASS_STATE	(CLASS_CSR_BASE_ADDR + 0x2bc)
-+
-+/* CLASS defines */
-+#define CLASS_PBUF_SIZE	0x100	/* Fixed by hardware */
-+#define CLASS_PBUF_HEADER_OFFSET	0x80	/* Can be configured */
-+
-+/* Can be configured */
-+#define CLASS_PBUF0_BASE_ADDR	0x000
-+/* Can be configured */
-+#define CLASS_PBUF1_BASE_ADDR	(CLASS_PBUF0_BASE_ADDR + CLASS_PBUF_SIZE)
-+/* Can be configured */
-+#define CLASS_PBUF2_BASE_ADDR	(CLASS_PBUF1_BASE_ADDR + CLASS_PBUF_SIZE)
-+/* Can be configured */
-+#define CLASS_PBUF3_BASE_ADDR	(CLASS_PBUF2_BASE_ADDR + CLASS_PBUF_SIZE)
-+
-+#define CLASS_PBUF0_HEADER_BASE_ADDR	(CLASS_PBUF0_BASE_ADDR + \
-+						CLASS_PBUF_HEADER_OFFSET)
-+#define CLASS_PBUF1_HEADER_BASE_ADDR	(CLASS_PBUF1_BASE_ADDR + \
-+						CLASS_PBUF_HEADER_OFFSET)
-+#define CLASS_PBUF2_HEADER_BASE_ADDR	(CLASS_PBUF2_BASE_ADDR + \
-+						CLASS_PBUF_HEADER_OFFSET)
-+#define CLASS_PBUF3_HEADER_BASE_ADDR	(CLASS_PBUF3_BASE_ADDR + \
-+						CLASS_PBUF_HEADER_OFFSET)
-+
-+#define CLASS_PE0_RO_DM_ADDR0_VAL	((CLASS_PBUF1_BASE_ADDR << 16) | \
-+						CLASS_PBUF0_BASE_ADDR)
-+#define CLASS_PE0_RO_DM_ADDR1_VAL	((CLASS_PBUF3_BASE_ADDR << 16) | \
-+						CLASS_PBUF2_BASE_ADDR)
-+
-+#define CLASS_PE0_QB_DM_ADDR0_VAL	((CLASS_PBUF1_HEADER_BASE_ADDR << 16) |\
-+						CLASS_PBUF0_HEADER_BASE_ADDR)
-+#define CLASS_PE0_QB_DM_ADDR1_VAL	((CLASS_PBUF3_HEADER_BASE_ADDR << 16) |\
-+						CLASS_PBUF2_HEADER_BASE_ADDR)
-+
-+#define CLASS_ROUTE_SIZE	128
-+#define CLASS_MAX_ROUTE_SIZE	256
-+#define CLASS_ROUTE_HASH_BITS	20
-+#define CLASS_ROUTE_HASH_MASK	(BIT(CLASS_ROUTE_HASH_BITS) - 1)
-+
-+/* Can be configured */
-+#define	CLASS_ROUTE0_BASE_ADDR	0x400
-+/* Can be configured */
-+#define CLASS_ROUTE1_BASE_ADDR	(CLASS_ROUTE0_BASE_ADDR + CLASS_ROUTE_SIZE)
-+/* Can be configured */
-+#define CLASS_ROUTE2_BASE_ADDR	(CLASS_ROUTE1_BASE_ADDR + CLASS_ROUTE_SIZE)
-+/* Can be configured */
-+#define CLASS_ROUTE3_BASE_ADDR	(CLASS_ROUTE2_BASE_ADDR + CLASS_ROUTE_SIZE)
-+
-+#define CLASS_SA_SIZE	128
-+#define CLASS_IPSEC_SA0_BASE_ADDR	0x600
-+/* not used */
-+#define CLASS_IPSEC_SA1_BASE_ADDR  (CLASS_IPSEC_SA0_BASE_ADDR + CLASS_SA_SIZE)
-+/* not used */
-+#define CLASS_IPSEC_SA2_BASE_ADDR  (CLASS_IPSEC_SA1_BASE_ADDR + CLASS_SA_SIZE)
-+/* not used */
-+#define CLASS_IPSEC_SA3_BASE_ADDR  (CLASS_IPSEC_SA2_BASE_ADDR + CLASS_SA_SIZE)
-+
-+/* generic purpose free dmem buffer, last portion of 2K dmem pbuf */
-+#define CLASS_GP_DMEM_BUF_SIZE	(2048 - (CLASS_PBUF_SIZE * 4) - \
-+				(CLASS_ROUTE_SIZE * 4) - (CLASS_SA_SIZE))
-+#define CLASS_GP_DMEM_BUF	((void *)(CLASS_IPSEC_SA0_BASE_ADDR + \
-+					CLASS_SA_SIZE))
-+
-+#define TWO_LEVEL_ROUTE		BIT(0)
-+#define PHYNO_IN_HASH		BIT(1)
-+#define HW_ROUTE_FETCH		BIT(3)
-+#define HW_BRIDGE_FETCH		BIT(5)
-+#define IP_ALIGNED		BIT(6)
-+#define ARC_HIT_CHECK_EN	BIT(7)
-+#define CLASS_TOE		BIT(11)
-+#define HASH_NORMAL		(0 << 12)
-+#define HASH_CRC_PORT		BIT(12)
-+#define HASH_CRC_IP		(2 << 12)
-+#define HASH_CRC_PORT_IP	(3 << 12)
-+#define QB2BUS_LE		BIT(15)
-+
-+#define TCP_CHKSUM_DROP		BIT(0)
-+#define UDP_CHKSUM_DROP		BIT(1)
-+#define IPV4_CHKSUM_DROP	BIT(9)
-+
-+/*CLASS_HIF_PARSE bits*/
-+#define HIF_PKT_CLASS_EN	BIT(0)
-+#define HIF_PKT_OFFSET(ofst)	(((ofst) & 0xF) << 1)
-+
-+struct class_cfg {
-+	u32 toe_mode;
-+	unsigned long route_table_baseaddr;
-+	u32 route_table_hash_bits;
-+	u32 pe_sys_clk_ratio;
-+	u32 resume;
-+};
-+
-+#endif /* _CLASS_CSR_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/emac_mtip.h
-@@ -0,0 +1,242 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _EMAC_H_
-+#define _EMAC_H_
-+
-+#include <linux/ethtool.h>
-+
-+#define EMAC_IEVENT_REG		0x004
-+#define EMAC_IMASK_REG		0x008
-+#define EMAC_R_DES_ACTIVE_REG	0x010
-+#define EMAC_X_DES_ACTIVE_REG	0x014
-+#define EMAC_ECNTRL_REG		0x024
-+#define EMAC_MII_DATA_REG	0x040
-+#define EMAC_MII_CTRL_REG	0x044
-+#define EMAC_MIB_CTRL_STS_REG	0x064
-+#define EMAC_RCNTRL_REG		0x084
-+#define EMAC_TCNTRL_REG		0x0C4
-+#define EMAC_PHY_ADDR_LOW	0x0E4
-+#define EMAC_PHY_ADDR_HIGH	0x0E8
-+#define EMAC_GAUR		0x120
-+#define EMAC_GALR		0x124
-+#define EMAC_TFWR_STR_FWD	0x144
-+#define EMAC_RX_SECTION_FULL	0x190
-+#define EMAC_RX_SECTION_EMPTY	0x194
-+#define EMAC_TX_SECTION_EMPTY	0x1A0
-+#define EMAC_TRUNC_FL		0x1B0
-+
-+#define RMON_T_DROP	0x200 /* Count of frames not cntd correctly */
-+#define RMON_T_PACKETS	0x204 /* RMON TX packet count */
-+#define RMON_T_BC_PKT	0x208 /* RMON TX broadcast pkts */
-+#define RMON_T_MC_PKT	0x20c /* RMON TX multicast pkts */
-+#define RMON_T_CRC_ALIGN	0x210 /* RMON TX pkts with CRC align err */
-+#define RMON_T_UNDERSIZE	0x214 /* RMON TX pkts < 64 bytes, good CRC */
-+#define RMON_T_OVERSIZE	0x218 /* RMON TX pkts > MAX_FL bytes good CRC */
-+#define RMON_T_FRAG	0x21c /* RMON TX pkts < 64 bytes, bad CRC */
-+#define RMON_T_JAB	0x220 /* RMON TX pkts > MAX_FL bytes, bad CRC */
-+#define RMON_T_COL	0x224 /* RMON TX collision count */
-+#define RMON_T_P64	0x228 /* RMON TX 64 byte pkts */
-+#define RMON_T_P65TO127	0x22c /* RMON TX 65 to 127 byte pkts */
-+#define RMON_T_P128TO255	0x230 /* RMON TX 128 to 255 byte pkts */
-+#define RMON_T_P256TO511	0x234 /* RMON TX 256 to 511 byte pkts */
-+#define RMON_T_P512TO1023	0x238 /* RMON TX 512 to 1023 byte pkts */
-+#define RMON_T_P1024TO2047	0x23c /* RMON TX 1024 to 2047 byte pkts */
-+#define RMON_T_P_GTE2048	0x240 /* RMON TX pkts > 2048 bytes */
-+#define RMON_T_OCTETS	0x244 /* RMON TX octets */
-+#define IEEE_T_DROP	0x248 /* Count of frames not counted crtly */
-+#define IEEE_T_FRAME_OK	0x24c /* Frames tx'd OK */
-+#define IEEE_T_1COL	0x250 /* Frames tx'd with single collision */
-+#define IEEE_T_MCOL	0x254 /* Frames tx'd with multiple collision */
-+#define IEEE_T_DEF	0x258 /* Frames tx'd after deferral delay */
-+#define IEEE_T_LCOL	0x25c /* Frames tx'd with late collision */
-+#define IEEE_T_EXCOL	0x260 /* Frames tx'd with excesv collisions */
-+#define IEEE_T_MACERR	0x264 /* Frames tx'd with TX FIFO underrun */
-+#define IEEE_T_CSERR	0x268 /* Frames tx'd with carrier sense err */
-+#define IEEE_T_SQE	0x26c /* Frames tx'd with SQE err */
-+#define IEEE_T_FDXFC	0x270 /* Flow control pause frames tx'd */
-+#define IEEE_T_OCTETS_OK	0x274 /* Octet count for frames tx'd w/o err */
-+#define RMON_R_PACKETS	0x284 /* RMON RX packet count */
-+#define RMON_R_BC_PKT	0x288 /* RMON RX broadcast pkts */
-+#define RMON_R_MC_PKT	0x28c /* RMON RX multicast pkts */
-+#define RMON_R_CRC_ALIGN	0x290 /* RMON RX pkts with CRC alignment err */
-+#define RMON_R_UNDERSIZE	0x294 /* RMON RX pkts < 64 bytes, good CRC */
-+#define RMON_R_OVERSIZE	0x298 /* RMON RX pkts > MAX_FL bytes good CRC */
-+#define RMON_R_FRAG	0x29c /* RMON RX pkts < 64 bytes, bad CRC */
-+#define RMON_R_JAB	0x2a0 /* RMON RX pkts > MAX_FL bytes, bad CRC */
-+#define RMON_R_RESVD_O	0x2a4 /* Reserved */
-+#define RMON_R_P64	0x2a8 /* RMON RX 64 byte pkts */
-+#define RMON_R_P65TO127	0x2ac /* RMON RX 65 to 127 byte pkts */
-+#define RMON_R_P128TO255	0x2b0 /* RMON RX 128 to 255 byte pkts */
-+#define RMON_R_P256TO511	0x2b4 /* RMON RX 256 to 511 byte pkts */
-+#define RMON_R_P512TO1023	0x2b8 /* RMON RX 512 to 1023 byte pkts */
-+#define RMON_R_P1024TO2047	0x2bc /* RMON RX 1024 to 2047 byte pkts */
-+#define RMON_R_P_GTE2048	0x2c0 /* RMON RX pkts > 2048 bytes */
-+#define RMON_R_OCTETS	0x2c4 /* RMON RX octets */
-+#define IEEE_R_DROP	0x2c8 /* Count frames not counted correctly */
-+#define IEEE_R_FRAME_OK	0x2cc /* Frames rx'd OK */
-+#define IEEE_R_CRC	0x2d0 /* Frames rx'd with CRC err */
-+#define IEEE_R_ALIGN	0x2d4 /* Frames rx'd with alignment err */
-+#define IEEE_R_MACERR	0x2d8 /* Receive FIFO overflow count */
-+#define IEEE_R_FDXFC	0x2dc /* Flow control pause frames rx'd */
-+#define IEEE_R_OCTETS_OK	0x2e0 /* Octet cnt for frames rx'd w/o err */
-+
-+#define EMAC_SMAC_0_0	0x500 /*Supplemental MAC Address 0 (RW).*/
-+#define EMAC_SMAC_0_1	0x504 /*Supplemental MAC Address 0 (RW).*/
-+
-+/* GEMAC definitions and settings */
-+
-+#define EMAC_PORT_0	0
-+#define EMAC_PORT_1	1
-+
-+/* GEMAC Bit definitions */
-+#define EMAC_IEVENT_HBERR		 0x80000000
-+#define EMAC_IEVENT_BABR		 0x40000000
-+#define EMAC_IEVENT_BABT		 0x20000000
-+#define EMAC_IEVENT_GRA			 0x10000000
-+#define EMAC_IEVENT_TXF			 0x08000000
-+#define EMAC_IEVENT_TXB			 0x04000000
-+#define EMAC_IEVENT_RXF			 0x02000000
-+#define EMAC_IEVENT_RXB			 0x01000000
-+#define EMAC_IEVENT_MII			 0x00800000
-+#define EMAC_IEVENT_EBERR		 0x00400000
-+#define EMAC_IEVENT_LC			 0x00200000
-+#define EMAC_IEVENT_RL			 0x00100000
-+#define EMAC_IEVENT_UN			 0x00080000
-+
-+#define EMAC_IMASK_HBERR                 0x80000000
-+#define EMAC_IMASK_BABR                  0x40000000
-+#define EMAC_IMASKT_BABT                 0x20000000
-+#define EMAC_IMASK_GRA                   0x10000000
-+#define EMAC_IMASKT_TXF                  0x08000000
-+#define EMAC_IMASK_TXB                   0x04000000
-+#define EMAC_IMASKT_RXF                  0x02000000
-+#define EMAC_IMASK_RXB                   0x01000000
-+#define EMAC_IMASK_MII                   0x00800000
-+#define EMAC_IMASK_EBERR                 0x00400000
-+#define EMAC_IMASK_LC                    0x00200000
-+#define EMAC_IMASKT_RL                   0x00100000
-+#define EMAC_IMASK_UN                    0x00080000
-+
-+#define EMAC_RCNTRL_MAX_FL_SHIFT         16
-+#define EMAC_RCNTRL_LOOP                 0x00000001
-+#define EMAC_RCNTRL_DRT                  0x00000002
-+#define EMAC_RCNTRL_MII_MODE             0x00000004
-+#define EMAC_RCNTRL_PROM                 0x00000008
-+#define EMAC_RCNTRL_BC_REJ               0x00000010
-+#define EMAC_RCNTRL_FCE                  0x00000020
-+#define EMAC_RCNTRL_RGMII                0x00000040
-+#define EMAC_RCNTRL_SGMII                0x00000080
-+#define EMAC_RCNTRL_RMII                 0x00000100
-+#define EMAC_RCNTRL_RMII_10T             0x00000200
-+#define EMAC_RCNTRL_CRC_FWD		 0x00004000
-+
-+#define EMAC_TCNTRL_GTS                  0x00000001
-+#define EMAC_TCNTRL_HBC                  0x00000002
-+#define EMAC_TCNTRL_FDEN                 0x00000004
-+#define EMAC_TCNTRL_TFC_PAUSE            0x00000008
-+#define EMAC_TCNTRL_RFC_PAUSE            0x00000010
-+
-+#define EMAC_ECNTRL_RESET                0x00000001      /* reset the EMAC */
-+#define EMAC_ECNTRL_ETHER_EN             0x00000002      /* enable the EMAC */
-+#define EMAC_ECNTRL_MAGIC_ENA		 0x00000004
-+#define EMAC_ECNTRL_SLEEP		 0x00000008
-+#define EMAC_ECNTRL_SPEED                0x00000020
-+#define EMAC_ECNTRL_DBSWAP               0x00000100
-+
-+#define EMAC_X_WMRK_STRFWD               0x00000100
-+
-+#define EMAC_X_DES_ACTIVE_TDAR           0x01000000
-+#define EMAC_R_DES_ACTIVE_RDAR           0x01000000
-+
-+#define EMAC_RX_SECTION_EMPTY_V		0x00010006
-+/*
-+ * The possible operating speeds of the MAC, currently supporting 10, 100 and
-+ * 1000Mb modes.
-+ */
-+enum mac_speed {SPEED_10M, SPEED_100M, SPEED_1000M, SPEED_1000M_PCS};
-+
-+/* MII-related definitios */
-+#define EMAC_MII_DATA_ST         0x40000000      /* Start of frame delimiter */
-+#define EMAC_MII_DATA_OP_RD      0x20000000      /* Perform a read operation */
-+#define EMAC_MII_DATA_OP_CL45_RD 0x30000000      /* Perform a read operation */
-+#define EMAC_MII_DATA_OP_WR      0x10000000      /* Perform a write operation */
-+#define EMAC_MII_DATA_OP_CL45_WR 0x10000000      /* Perform a write operation */
-+#define EMAC_MII_DATA_PA_MSK     0x0f800000      /* PHY Address field mask */
-+#define EMAC_MII_DATA_RA_MSK     0x007c0000      /* PHY Register field mask */
-+#define EMAC_MII_DATA_TA         0x00020000      /* Turnaround */
-+#define EMAC_MII_DATA_DATAMSK    0x0000ffff      /* PHY data field */
-+
-+#define EMAC_MII_DATA_RA_SHIFT   18      /* MII Register address bits */
-+#define EMAC_MII_DATA_RA_MASK	 0x1F      /* MII Register address mask */
-+#define EMAC_MII_DATA_PA_SHIFT   23      /* MII PHY address bits */
-+#define EMAC_MII_DATA_PA_MASK    0x1F      /* MII PHY address mask */
-+
-+#define EMAC_MII_DATA_RA(v) (((v) & EMAC_MII_DATA_RA_MASK) << \
-+				EMAC_MII_DATA_RA_SHIFT)
-+#define EMAC_MII_DATA_PA(v) (((v) & EMAC_MII_DATA_RA_MASK) << \
-+				EMAC_MII_DATA_PA_SHIFT)
-+#define EMAC_MII_DATA(v)    ((v) & 0xffff)
-+
-+#define EMAC_MII_SPEED_SHIFT	1
-+#define EMAC_HOLDTIME_SHIFT	8
-+#define EMAC_HOLDTIME_MASK	0x7
-+#define EMAC_HOLDTIME(v)	(((v) & EMAC_HOLDTIME_MASK) << \
-+					EMAC_HOLDTIME_SHIFT)
-+
-+/*
-+ * The Address organisation for the MAC device.  All addresses are split into
-+ * two 32-bit register fields.  The first one (bottom) is the lower 32-bits of
-+ * the address and the other field are the high order bits - this may be 16-bits
-+ * in the case of MAC addresses, or 32-bits for the hash address.
-+ * In terms of memory storage, the first item (bottom) is assumed to be at a
-+ * lower address location than 'top'. i.e. top should be at address location of
-+ * 'bottom' + 4 bytes.
-+ */
-+struct pfe_mac_addr {
-+	u32 bottom;     /* Lower 32-bits of address. */
-+	u32 top;        /* Upper 32-bits of address. */
-+};
-+
-+/*
-+ * The following is the organisation of the address filters section of the MAC
-+ * registers.  The Cadence MAC contains four possible specific address match
-+ * addresses, if an incoming frame corresponds to any one of these four
-+ * addresses then the frame will be copied to memory.
-+ * It is not necessary for all four of the address match registers to be
-+ * programmed, this is application dependent.
-+ */
-+struct spec_addr {
-+	struct pfe_mac_addr one;        /* Specific address register 1. */
-+	struct pfe_mac_addr two;        /* Specific address register 2. */
-+	struct pfe_mac_addr three;      /* Specific address register 3. */
-+	struct pfe_mac_addr four;       /* Specific address register 4. */
-+};
-+
-+struct gemac_cfg {
-+	u32 mode;
-+	u32 speed;
-+	u32 duplex;
-+};
-+
-+/* EMAC Hash size */
-+#define EMAC_HASH_REG_BITS       64
-+
-+#define EMAC_SPEC_ADDR_MAX	4
-+
-+#endif /* _EMAC_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/gpi.h
-@@ -0,0 +1,86 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _GPI_H_
-+#define _GPI_H_
-+
-+#define GPI_VERSION	0x00
-+#define GPI_CTRL	0x04
-+#define GPI_RX_CONFIG	0x08
-+#define GPI_HDR_SIZE	0x0c
-+#define GPI_BUF_SIZE	0x10
-+#define GPI_LMEM_ALLOC_ADDR	0x14
-+#define GPI_LMEM_FREE_ADDR	0x18
-+#define GPI_DDR_ALLOC_ADDR	0x1c
-+#define GPI_DDR_FREE_ADDR	0x20
-+#define GPI_CLASS_ADDR	0x24
-+#define GPI_DRX_FIFO	0x28
-+#define GPI_TRX_FIFO	0x2c
-+#define GPI_INQ_PKTPTR	0x30
-+#define GPI_DDR_DATA_OFFSET	0x34
-+#define GPI_LMEM_DATA_OFFSET	0x38
-+#define GPI_TMLF_TX	0x4c
-+#define GPI_DTX_ASEQ	0x50
-+#define GPI_FIFO_STATUS	0x54
-+#define GPI_FIFO_DEBUG	0x58
-+#define GPI_TX_PAUSE_TIME	0x5c
-+#define GPI_LMEM_SEC_BUF_DATA_OFFSET	0x60
-+#define GPI_DDR_SEC_BUF_DATA_OFFSET	0x64
-+#define GPI_TOE_CHKSUM_EN	0x68
-+#define GPI_OVERRUN_DROPCNT	0x6c
-+#define GPI_CSR_MTIP_PAUSE_REG		0x74
-+#define GPI_CSR_MTIP_PAUSE_QUANTUM	0x78
-+#define GPI_CSR_RX_CNT			0x7c
-+#define GPI_CSR_TX_CNT			0x80
-+#define GPI_CSR_DEBUG1			0x84
-+#define GPI_CSR_DEBUG2			0x88
-+
-+struct gpi_cfg {
-+	u32 lmem_rtry_cnt;
-+	u32 tmlf_txthres;
-+	u32 aseq_len;
-+	u32 mtip_pause_reg;
-+};
-+
-+/* GPI commons defines */
-+#define GPI_LMEM_BUF_EN	0x1
-+#define GPI_DDR_BUF_EN	0x1
-+
-+/* EGPI 1 defines */
-+#define EGPI1_LMEM_RTRY_CNT	0x40
-+#define EGPI1_TMLF_TXTHRES	0xBC
-+#define EGPI1_ASEQ_LEN	0x50
-+
-+/* EGPI 2 defines */
-+#define EGPI2_LMEM_RTRY_CNT	0x40
-+#define EGPI2_TMLF_TXTHRES	0xBC
-+#define EGPI2_ASEQ_LEN	0x40
-+
-+/* EGPI 3 defines */
-+#define EGPI3_LMEM_RTRY_CNT	0x40
-+#define EGPI3_TMLF_TXTHRES	0xBC
-+#define EGPI3_ASEQ_LEN	0x40
-+
-+/* HGPI defines */
-+#define HGPI_LMEM_RTRY_CNT	0x40
-+#define HGPI_TMLF_TXTHRES	0xBC
-+#define HGPI_ASEQ_LEN	0x40
-+
-+#define EGPI_PAUSE_TIME		0x000007D0
-+#define EGPI_PAUSE_ENABLE	0x40000000
-+#endif /* _GPI_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/hif.h
-@@ -0,0 +1,100 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _HIF_H_
-+#define _HIF_H_
-+
-+/* @file hif.h.
-+ * hif - PFE hif block control and status register.
-+ * Mapped on CBUS and accessible from all PE's and ARM.
-+ */
-+#define HIF_VERSION	(HIF_BASE_ADDR + 0x00)
-+#define HIF_TX_CTRL	(HIF_BASE_ADDR + 0x04)
-+#define HIF_TX_CURR_BD_ADDR	(HIF_BASE_ADDR + 0x08)
-+#define HIF_TX_ALLOC	(HIF_BASE_ADDR + 0x0c)
-+#define HIF_TX_BDP_ADDR	(HIF_BASE_ADDR + 0x10)
-+#define HIF_TX_STATUS	(HIF_BASE_ADDR + 0x14)
-+#define HIF_RX_CTRL	(HIF_BASE_ADDR + 0x20)
-+#define HIF_RX_BDP_ADDR	(HIF_BASE_ADDR + 0x24)
-+#define HIF_RX_STATUS	(HIF_BASE_ADDR + 0x30)
-+#define HIF_INT_SRC	(HIF_BASE_ADDR + 0x34)
-+#define HIF_INT_ENABLE	(HIF_BASE_ADDR + 0x38)
-+#define HIF_POLL_CTRL	(HIF_BASE_ADDR + 0x3c)
-+#define HIF_RX_CURR_BD_ADDR	(HIF_BASE_ADDR + 0x40)
-+#define HIF_RX_ALLOC	(HIF_BASE_ADDR + 0x44)
-+#define HIF_TX_DMA_STATUS	(HIF_BASE_ADDR + 0x48)
-+#define HIF_RX_DMA_STATUS	(HIF_BASE_ADDR + 0x4c)
-+#define HIF_INT_COAL	(HIF_BASE_ADDR + 0x50)
-+
-+/* HIF_INT_SRC/ HIF_INT_ENABLE control bits */
-+#define HIF_INT		BIT(0)
-+#define HIF_RXBD_INT	BIT(1)
-+#define HIF_RXPKT_INT	BIT(2)
-+#define HIF_TXBD_INT	BIT(3)
-+#define HIF_TXPKT_INT	BIT(4)
-+
-+/* HIF_TX_CTRL bits */
-+#define HIF_CTRL_DMA_EN			BIT(0)
-+#define HIF_CTRL_BDP_POLL_CTRL_EN	BIT(1)
-+#define HIF_CTRL_BDP_CH_START_WSTB	BIT(2)
-+
-+/* HIF_RX_STATUS bits */
-+#define BDP_CSR_RX_DMA_ACTV     BIT(16)
-+
-+/* HIF_INT_ENABLE bits */
-+#define HIF_INT_EN		BIT(0)
-+#define HIF_RXBD_INT_EN		BIT(1)
-+#define HIF_RXPKT_INT_EN	BIT(2)
-+#define HIF_TXBD_INT_EN		BIT(3)
-+#define HIF_TXPKT_INT_EN	BIT(4)
-+
-+/* HIF_POLL_CTRL bits*/
-+#define HIF_RX_POLL_CTRL_CYCLE	0x0400
-+#define HIF_TX_POLL_CTRL_CYCLE	0x0400
-+
-+/* HIF_INT_COAL bits*/
-+#define HIF_INT_COAL_ENABLE	BIT(31)
-+
-+/* Buffer descriptor control bits */
-+#define BD_CTRL_BUFLEN_MASK	0x3fff
-+#define BD_BUF_LEN(x)	((x) & BD_CTRL_BUFLEN_MASK)
-+#define BD_CTRL_CBD_INT_EN	BIT(16)
-+#define BD_CTRL_PKT_INT_EN	BIT(17)
-+#define BD_CTRL_LIFM		BIT(18)
-+#define BD_CTRL_LAST_BD		BIT(19)
-+#define BD_CTRL_DIR		BIT(20)
-+#define BD_CTRL_LMEM_CPY	BIT(21) /* Valid only for HIF_NOCPY */
-+#define BD_CTRL_PKT_XFER	BIT(24)
-+#define BD_CTRL_DESC_EN		BIT(31)
-+#define BD_CTRL_PARSE_DISABLE	BIT(25)
-+#define BD_CTRL_BRFETCH_DISABLE	BIT(26)
-+#define BD_CTRL_RTFETCH_DISABLE	BIT(27)
-+
-+/* Buffer descriptor status bits*/
-+#define BD_STATUS_CONN_ID(x)	((x) & 0xffff)
-+#define BD_STATUS_DIR_PROC_ID	BIT(16)
-+#define BD_STATUS_CONN_ID_EN	BIT(17)
-+#define BD_STATUS_PE2PROC_ID(x)	(((x) & 7) << 18)
-+#define BD_STATUS_LE_DATA	BIT(21)
-+#define BD_STATUS_CHKSUM_EN	BIT(22)
-+
-+/* HIF Buffer descriptor status bits */
-+#define DIR_PROC_ID	BIT(16)
-+#define PROC_ID(id)	((id) << 18)
-+
-+#endif /* _HIF_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/hif_nocpy.h
-@@ -0,0 +1,50 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _HIF_NOCPY_H_
-+#define _HIF_NOCPY_H_
-+
-+#define HIF_NOCPY_VERSION	(HIF_NOCPY_BASE_ADDR + 0x00)
-+#define HIF_NOCPY_TX_CTRL	(HIF_NOCPY_BASE_ADDR + 0x04)
-+#define HIF_NOCPY_TX_CURR_BD_ADDR	(HIF_NOCPY_BASE_ADDR + 0x08)
-+#define HIF_NOCPY_TX_ALLOC	(HIF_NOCPY_BASE_ADDR + 0x0c)
-+#define HIF_NOCPY_TX_BDP_ADDR	(HIF_NOCPY_BASE_ADDR + 0x10)
-+#define HIF_NOCPY_TX_STATUS	(HIF_NOCPY_BASE_ADDR + 0x14)
-+#define HIF_NOCPY_RX_CTRL	(HIF_NOCPY_BASE_ADDR + 0x20)
-+#define HIF_NOCPY_RX_BDP_ADDR	(HIF_NOCPY_BASE_ADDR + 0x24)
-+#define HIF_NOCPY_RX_STATUS	(HIF_NOCPY_BASE_ADDR + 0x30)
-+#define HIF_NOCPY_INT_SRC	(HIF_NOCPY_BASE_ADDR + 0x34)
-+#define HIF_NOCPY_INT_ENABLE	(HIF_NOCPY_BASE_ADDR + 0x38)
-+#define HIF_NOCPY_POLL_CTRL	(HIF_NOCPY_BASE_ADDR + 0x3c)
-+#define HIF_NOCPY_RX_CURR_BD_ADDR	(HIF_NOCPY_BASE_ADDR + 0x40)
-+#define HIF_NOCPY_RX_ALLOC	(HIF_NOCPY_BASE_ADDR + 0x44)
-+#define HIF_NOCPY_TX_DMA_STATUS	(HIF_NOCPY_BASE_ADDR + 0x48)
-+#define HIF_NOCPY_RX_DMA_STATUS	(HIF_NOCPY_BASE_ADDR + 0x4c)
-+#define HIF_NOCPY_RX_INQ0_PKTPTR	(HIF_NOCPY_BASE_ADDR + 0x50)
-+#define HIF_NOCPY_RX_INQ1_PKTPTR	(HIF_NOCPY_BASE_ADDR + 0x54)
-+#define HIF_NOCPY_TX_PORT_NO	(HIF_NOCPY_BASE_ADDR + 0x60)
-+#define HIF_NOCPY_LMEM_ALLOC_ADDR	(HIF_NOCPY_BASE_ADDR + 0x64)
-+#define HIF_NOCPY_CLASS_ADDR	(HIF_NOCPY_BASE_ADDR + 0x68)
-+#define HIF_NOCPY_TMU_PORT0_ADDR	(HIF_NOCPY_BASE_ADDR + 0x70)
-+#define HIF_NOCPY_TMU_PORT1_ADDR	(HIF_NOCPY_BASE_ADDR + 0x74)
-+#define HIF_NOCPY_TMU_PORT2_ADDR	(HIF_NOCPY_BASE_ADDR + 0x7c)
-+#define HIF_NOCPY_TMU_PORT3_ADDR	(HIF_NOCPY_BASE_ADDR + 0x80)
-+#define HIF_NOCPY_TMU_PORT4_ADDR	(HIF_NOCPY_BASE_ADDR + 0x84)
-+#define HIF_NOCPY_INT_COAL	(HIF_NOCPY_BASE_ADDR + 0x90)
-+
-+#endif /* _HIF_NOCPY_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/tmu_csr.h
-@@ -0,0 +1,168 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _TMU_CSR_H_
-+#define _TMU_CSR_H_
-+
-+#define TMU_VERSION	(TMU_CSR_BASE_ADDR + 0x000)
-+#define TMU_INQ_WATERMARK	(TMU_CSR_BASE_ADDR + 0x004)
-+#define TMU_PHY_INQ_PKTPTR	(TMU_CSR_BASE_ADDR + 0x008)
-+#define TMU_PHY_INQ_PKTINFO	(TMU_CSR_BASE_ADDR + 0x00c)
-+#define TMU_PHY_INQ_FIFO_CNT	(TMU_CSR_BASE_ADDR + 0x010)
-+#define TMU_SYS_GENERIC_CONTROL	(TMU_CSR_BASE_ADDR + 0x014)
-+#define TMU_SYS_GENERIC_STATUS	(TMU_CSR_BASE_ADDR + 0x018)
-+#define TMU_SYS_GEN_CON0	(TMU_CSR_BASE_ADDR + 0x01c)
-+#define TMU_SYS_GEN_CON1	(TMU_CSR_BASE_ADDR + 0x020)
-+#define TMU_SYS_GEN_CON2	(TMU_CSR_BASE_ADDR + 0x024)
-+#define TMU_SYS_GEN_CON3	(TMU_CSR_BASE_ADDR + 0x028)
-+#define TMU_SYS_GEN_CON4	(TMU_CSR_BASE_ADDR + 0x02c)
-+#define TMU_TEQ_DISABLE_DROPCHK	(TMU_CSR_BASE_ADDR + 0x030)
-+#define TMU_TEQ_CTRL	(TMU_CSR_BASE_ADDR + 0x034)
-+#define TMU_TEQ_QCFG	(TMU_CSR_BASE_ADDR + 0x038)
-+#define TMU_TEQ_DROP_STAT	(TMU_CSR_BASE_ADDR + 0x03c)
-+#define TMU_TEQ_QAVG	(TMU_CSR_BASE_ADDR + 0x040)
-+#define TMU_TEQ_WREG_PROB	(TMU_CSR_BASE_ADDR + 0x044)
-+#define TMU_TEQ_TRANS_STAT	(TMU_CSR_BASE_ADDR + 0x048)
-+#define TMU_TEQ_HW_PROB_CFG0	(TMU_CSR_BASE_ADDR + 0x04c)
-+#define TMU_TEQ_HW_PROB_CFG1	(TMU_CSR_BASE_ADDR + 0x050)
-+#define TMU_TEQ_HW_PROB_CFG2	(TMU_CSR_BASE_ADDR + 0x054)
-+#define TMU_TEQ_HW_PROB_CFG3	(TMU_CSR_BASE_ADDR + 0x058)
-+#define TMU_TEQ_HW_PROB_CFG4	(TMU_CSR_BASE_ADDR + 0x05c)
-+#define TMU_TEQ_HW_PROB_CFG5	(TMU_CSR_BASE_ADDR + 0x060)
-+#define TMU_TEQ_HW_PROB_CFG6	(TMU_CSR_BASE_ADDR + 0x064)
-+#define TMU_TEQ_HW_PROB_CFG7	(TMU_CSR_BASE_ADDR + 0x068)
-+#define TMU_TEQ_HW_PROB_CFG8	(TMU_CSR_BASE_ADDR + 0x06c)
-+#define TMU_TEQ_HW_PROB_CFG9	(TMU_CSR_BASE_ADDR + 0x070)
-+#define TMU_TEQ_HW_PROB_CFG10	(TMU_CSR_BASE_ADDR + 0x074)
-+#define TMU_TEQ_HW_PROB_CFG11	(TMU_CSR_BASE_ADDR + 0x078)
-+#define TMU_TEQ_HW_PROB_CFG12	(TMU_CSR_BASE_ADDR + 0x07c)
-+#define TMU_TEQ_HW_PROB_CFG13	(TMU_CSR_BASE_ADDR + 0x080)
-+#define TMU_TEQ_HW_PROB_CFG14	(TMU_CSR_BASE_ADDR + 0x084)
-+#define TMU_TEQ_HW_PROB_CFG15	(TMU_CSR_BASE_ADDR + 0x088)
-+#define TMU_TEQ_HW_PROB_CFG16	(TMU_CSR_BASE_ADDR + 0x08c)
-+#define TMU_TEQ_HW_PROB_CFG17	(TMU_CSR_BASE_ADDR + 0x090)
-+#define TMU_TEQ_HW_PROB_CFG18	(TMU_CSR_BASE_ADDR + 0x094)
-+#define TMU_TEQ_HW_PROB_CFG19	(TMU_CSR_BASE_ADDR + 0x098)
-+#define TMU_TEQ_HW_PROB_CFG20	(TMU_CSR_BASE_ADDR + 0x09c)
-+#define TMU_TEQ_HW_PROB_CFG21	(TMU_CSR_BASE_ADDR + 0x0a0)
-+#define TMU_TEQ_HW_PROB_CFG22	(TMU_CSR_BASE_ADDR + 0x0a4)
-+#define TMU_TEQ_HW_PROB_CFG23	(TMU_CSR_BASE_ADDR + 0x0a8)
-+#define TMU_TEQ_HW_PROB_CFG24	(TMU_CSR_BASE_ADDR + 0x0ac)
-+#define TMU_TEQ_HW_PROB_CFG25	(TMU_CSR_BASE_ADDR + 0x0b0)
-+#define TMU_TDQ_IIFG_CFG	(TMU_CSR_BASE_ADDR + 0x0b4)
-+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ.
-+ * This is a global Enable for all schedulers in PHY0
-+ */
-+#define TMU_TDQ0_SCH_CTRL	(TMU_CSR_BASE_ADDR + 0x0b8)
-+
-+#define TMU_LLM_CTRL	(TMU_CSR_BASE_ADDR + 0x0bc)
-+#define TMU_LLM_BASE_ADDR	(TMU_CSR_BASE_ADDR + 0x0c0)
-+#define TMU_LLM_QUE_LEN	(TMU_CSR_BASE_ADDR + 0x0c4)
-+#define TMU_LLM_QUE_HEADPTR	(TMU_CSR_BASE_ADDR + 0x0c8)
-+#define TMU_LLM_QUE_TAILPTR	(TMU_CSR_BASE_ADDR + 0x0cc)
-+#define TMU_LLM_QUE_DROPCNT	(TMU_CSR_BASE_ADDR + 0x0d0)
-+#define TMU_INT_EN	(TMU_CSR_BASE_ADDR + 0x0d4)
-+#define TMU_INT_SRC	(TMU_CSR_BASE_ADDR + 0x0d8)
-+#define TMU_INQ_STAT	(TMU_CSR_BASE_ADDR + 0x0dc)
-+#define TMU_CTRL	(TMU_CSR_BASE_ADDR + 0x0e0)
-+
-+/* [31] Mem Access Command. 0 = Internal Memory Read, 1 = Internal memory
-+ * Write [27:24] Byte Enables of the Internal memory access [23:0] Address of
-+ * the internal memory. This address is used to access both the PM and DM of
-+ * all the PE's
-+ */
-+#define TMU_MEM_ACCESS_ADDR	(TMU_CSR_BASE_ADDR + 0x0e4)
-+
-+/* Internal Memory Access Write Data */
-+#define TMU_MEM_ACCESS_WDATA	(TMU_CSR_BASE_ADDR + 0x0e8)
-+/* Internal Memory Access Read Data. The commands are blocked
-+ * at the mem_access only
-+ */
-+#define TMU_MEM_ACCESS_RDATA	(TMU_CSR_BASE_ADDR + 0x0ec)
-+
-+/* [31:0] PHY0 in queue address (must be initialized with one of the
-+ * xxx_INQ_PKTPTR cbus addresses)
-+ */
-+#define TMU_PHY0_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x0f0)
-+/* [31:0] PHY1 in queue address (must be initialized with one of the
-+ * xxx_INQ_PKTPTR cbus addresses)
-+ */
-+#define TMU_PHY1_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x0f4)
-+/* [31:0] PHY2 in queue address (must be initialized with one of the
-+ * xxx_INQ_PKTPTR cbus addresses)
-+ */
-+#define TMU_PHY2_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x0f8)
-+/* [31:0] PHY3 in queue address (must be initialized with one of the
-+ * xxx_INQ_PKTPTR cbus addresses)
-+ */
-+#define TMU_PHY3_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x0fc)
-+#define TMU_BMU_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x100)
-+#define TMU_TX_CTRL	(TMU_CSR_BASE_ADDR + 0x104)
-+
-+#define TMU_BUS_ACCESS_WDATA	(TMU_CSR_BASE_ADDR + 0x108)
-+#define TMU_BUS_ACCESS	(TMU_CSR_BASE_ADDR + 0x10c)
-+#define TMU_BUS_ACCESS_RDATA	(TMU_CSR_BASE_ADDR + 0x110)
-+
-+#define TMU_PE_SYS_CLK_RATIO	(TMU_CSR_BASE_ADDR + 0x114)
-+#define TMU_PE_STATUS	(TMU_CSR_BASE_ADDR + 0x118)
-+#define TMU_TEQ_MAX_THRESHOLD	(TMU_CSR_BASE_ADDR + 0x11c)
-+/* [31:0] PHY4 in queue address (must be initialized with one of the
-+ * xxx_INQ_PKTPTR cbus addresses)
-+ */
-+#define TMU_PHY4_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x134)
-+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ.
-+ * This is a global Enable for all schedulers in PHY1
-+ */
-+#define TMU_TDQ1_SCH_CTRL	(TMU_CSR_BASE_ADDR + 0x138)
-+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ.
-+ * This is a global Enable for all schedulers in PHY2
-+ */
-+#define TMU_TDQ2_SCH_CTRL	(TMU_CSR_BASE_ADDR + 0x13c)
-+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ.
-+ * This is a global Enable for all schedulers in PHY3
-+ */
-+#define TMU_TDQ3_SCH_CTRL	(TMU_CSR_BASE_ADDR + 0x140)
-+#define TMU_BMU_BUF_SIZE	(TMU_CSR_BASE_ADDR + 0x144)
-+/* [31:0] PHY5 in queue address (must be initialized with one of the
-+ * xxx_INQ_PKTPTR cbus addresses)
-+ */
-+#define TMU_PHY5_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x148)
-+
-+#define SW_RESET		BIT(0)	/* Global software reset */
-+#define INQ_RESET		BIT(2)
-+#define TEQ_RESET		BIT(3)
-+#define TDQ_RESET		BIT(4)
-+#define PE_RESET		BIT(5)
-+#define MEM_INIT		BIT(6)
-+#define MEM_INIT_DONE		BIT(7)
-+#define LLM_INIT		BIT(8)
-+#define LLM_INIT_DONE		BIT(9)
-+#define ECC_MEM_INIT_DONE	BIT(10)
-+
-+struct tmu_cfg {
-+	u32 pe_sys_clk_ratio;
-+	unsigned long llm_base_addr;
-+	u32 llm_queue_len;
-+};
-+
-+/* Not HW related for pfe_ctrl / pfe common defines */
-+#define DEFAULT_MAX_QDEPTH	80
-+#define DEFAULT_Q0_QDEPTH	511 /*We keep one large queue for host tx qos */
-+#define DEFAULT_TMU3_QDEPTH	127
-+
-+#endif /* _TMU_CSR_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/util_csr.h
-@@ -0,0 +1,61 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _UTIL_CSR_H_
-+#define _UTIL_CSR_H_
-+
-+#define UTIL_VERSION	(UTIL_CSR_BASE_ADDR + 0x000)
-+#define UTIL_TX_CTRL	(UTIL_CSR_BASE_ADDR + 0x004)
-+#define UTIL_INQ_PKTPTR	(UTIL_CSR_BASE_ADDR + 0x010)
-+
-+#define UTIL_HDR_SIZE	(UTIL_CSR_BASE_ADDR + 0x014)
-+
-+#define UTIL_PE0_QB_DM_ADDR0	(UTIL_CSR_BASE_ADDR + 0x020)
-+#define UTIL_PE0_QB_DM_ADDR1	(UTIL_CSR_BASE_ADDR + 0x024)
-+#define UTIL_PE0_RO_DM_ADDR0	(UTIL_CSR_BASE_ADDR + 0x060)
-+#define UTIL_PE0_RO_DM_ADDR1	(UTIL_CSR_BASE_ADDR + 0x064)
-+
-+#define UTIL_MEM_ACCESS_ADDR	(UTIL_CSR_BASE_ADDR + 0x100)
-+#define UTIL_MEM_ACCESS_WDATA	(UTIL_CSR_BASE_ADDR + 0x104)
-+#define UTIL_MEM_ACCESS_RDATA	(UTIL_CSR_BASE_ADDR + 0x108)
-+
-+#define UTIL_TM_INQ_ADDR	(UTIL_CSR_BASE_ADDR + 0x114)
-+#define UTIL_PE_STATUS	(UTIL_CSR_BASE_ADDR + 0x118)
-+
-+#define UTIL_PE_SYS_CLK_RATIO	(UTIL_CSR_BASE_ADDR + 0x200)
-+#define UTIL_AFULL_THRES	(UTIL_CSR_BASE_ADDR + 0x204)
-+#define UTIL_GAP_BETWEEN_READS	(UTIL_CSR_BASE_ADDR + 0x208)
-+#define UTIL_MAX_BUF_CNT	(UTIL_CSR_BASE_ADDR + 0x20c)
-+#define UTIL_TSQ_FIFO_THRES	(UTIL_CSR_BASE_ADDR + 0x210)
-+#define UTIL_TSQ_MAX_CNT	(UTIL_CSR_BASE_ADDR + 0x214)
-+#define UTIL_IRAM_DATA_0	(UTIL_CSR_BASE_ADDR + 0x218)
-+#define UTIL_IRAM_DATA_1	(UTIL_CSR_BASE_ADDR + 0x21c)
-+#define UTIL_IRAM_DATA_2	(UTIL_CSR_BASE_ADDR + 0x220)
-+#define UTIL_IRAM_DATA_3	(UTIL_CSR_BASE_ADDR + 0x224)
-+
-+#define UTIL_BUS_ACCESS_ADDR	(UTIL_CSR_BASE_ADDR + 0x228)
-+#define UTIL_BUS_ACCESS_WDATA	(UTIL_CSR_BASE_ADDR + 0x22c)
-+#define UTIL_BUS_ACCESS_RDATA	(UTIL_CSR_BASE_ADDR + 0x230)
-+
-+#define UTIL_INQ_AFULL_THRES	(UTIL_CSR_BASE_ADDR + 0x234)
-+
-+struct util_cfg {
-+	u32 pe_sys_clk_ratio;
-+};
-+
-+#endif /* _UTIL_CSR_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/pfe.h
-@@ -0,0 +1,372 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _PFE_H_
-+#define _PFE_H_
-+
-+#include "cbus.h"
-+
-+#define CLASS_DMEM_BASE_ADDR(i)	(0x00000000 | ((i) << 20))
-+/*
-+ * Only valid for mem access register interface
-+ */
-+#define CLASS_IMEM_BASE_ADDR(i)	(0x00000000 | ((i) << 20))
-+#define CLASS_DMEM_SIZE	0x00002000
-+#define CLASS_IMEM_SIZE	0x00008000
-+
-+#define TMU_DMEM_BASE_ADDR(i)	(0x00000000 + ((i) << 20))
-+/*
-+ * Only valid for mem access register interface
-+ */
-+#define TMU_IMEM_BASE_ADDR(i)	(0x00000000 + ((i) << 20))
-+#define TMU_DMEM_SIZE	0x00000800
-+#define TMU_IMEM_SIZE	0x00002000
-+
-+#define UTIL_DMEM_BASE_ADDR	0x00000000
-+#define UTIL_DMEM_SIZE	0x00002000
-+
-+#define PE_LMEM_BASE_ADDR	0xc3010000
-+#define PE_LMEM_SIZE	0x8000
-+#define PE_LMEM_END	(PE_LMEM_BASE_ADDR + PE_LMEM_SIZE)
-+
-+#define DMEM_BASE_ADDR	0x00000000
-+#define DMEM_SIZE	0x2000	/* TMU has less... */
-+#define DMEM_END	(DMEM_BASE_ADDR + DMEM_SIZE)
-+
-+#define PMEM_BASE_ADDR	0x00010000
-+#define PMEM_SIZE	0x8000	/* TMU has less... */
-+#define PMEM_END	(PMEM_BASE_ADDR + PMEM_SIZE)
-+
-+/* These check memory ranges from PE point of view/memory map */
-+#define IS_DMEM(addr, len)				\
-+	({ typeof(addr) addr_ = (addr);			\
-+	((unsigned long)(addr_) >= DMEM_BASE_ADDR) &&	\
-+	(((unsigned long)(addr_) + (len)) <= DMEM_END); })
-+
-+#define IS_PMEM(addr, len)				\
-+	({ typeof(addr) addr_ = (addr);			\
-+	((unsigned long)(addr_) >= PMEM_BASE_ADDR) &&	\
-+	(((unsigned long)(addr_) + (len)) <= PMEM_END); })
-+
-+#define IS_PE_LMEM(addr, len)				\
-+	({ typeof(addr) addr_ = (addr);			\
-+	((unsigned long)(addr_) >=			\
-+	PE_LMEM_BASE_ADDR) &&				\
-+	(((unsigned long)(addr_) +			\
-+	(len)) <= PE_LMEM_END); })
-+
-+#define IS_PFE_LMEM(addr, len)				\
-+	({ typeof(addr) addr_ = (addr);			\
-+	((unsigned long)(addr_) >=			\
-+	CBUS_VIRT_TO_PFE(LMEM_BASE_ADDR)) &&		\
-+	(((unsigned long)(addr_) + (len)) <=		\
-+	CBUS_VIRT_TO_PFE(LMEM_END)); })
-+
-+#define __IS_PHYS_DDR(addr, len)			\
-+	({ typeof(addr) addr_ = (addr);			\
-+	((unsigned long)(addr_) >=			\
-+	DDR_PHYS_BASE_ADDR) &&				\
-+	(((unsigned long)(addr_) + (len)) <=		\
-+	DDR_PHYS_END); })
-+
-+#define IS_PHYS_DDR(addr, len)	__IS_PHYS_DDR(DDR_PFE_TO_PHYS(addr), len)
-+
-+/*
-+ * If using a run-time virtual address for the cbus base address use this code
-+ */
-+extern void *cbus_base_addr;
-+extern void *ddr_base_addr;
-+extern unsigned long ddr_phys_base_addr;
-+extern unsigned int ddr_size;
-+
-+#define CBUS_BASE_ADDR	cbus_base_addr
-+#define DDR_PHYS_BASE_ADDR	ddr_phys_base_addr
-+#define DDR_BASE_ADDR	ddr_base_addr
-+#define DDR_SIZE	ddr_size
-+
-+#define DDR_PHYS_END	(DDR_PHYS_BASE_ADDR + DDR_SIZE)
-+
-+#define LS1012A_PFE_RESET_WA	/*
-+				 * PFE doesn't have global reset and re-init
-+				 * should takecare few things to make PFE
-+				 * functional after reset
-+				 */
-+#define PFE_CBUS_PHYS_BASE_ADDR	0xc0000000	/* CBUS physical base address
-+						 * as seen by PE's.
-+						 */
-+/* CBUS physical base address as seen by PE's. */
-+#define PFE_CBUS_PHYS_BASE_ADDR_FROM_PFE	0xc0000000
-+
-+#define DDR_PHYS_TO_PFE(p)	(((unsigned long int)(p)) & 0x7FFFFFFF)
-+#define DDR_PFE_TO_PHYS(p)	(((unsigned long int)(p)) | 0x80000000)
-+#define CBUS_PHYS_TO_PFE(p)	(((p) - PFE_CBUS_PHYS_BASE_ADDR) + \
-+				PFE_CBUS_PHYS_BASE_ADDR_FROM_PFE)
-+/* Translates to PFE address map */
-+
-+#define DDR_PHYS_TO_VIRT(p)	(((p) - DDR_PHYS_BASE_ADDR) + DDR_BASE_ADDR)
-+#define DDR_VIRT_TO_PHYS(v)	(((v) - DDR_BASE_ADDR) + DDR_PHYS_BASE_ADDR)
-+#define DDR_VIRT_TO_PFE(p)	(DDR_PHYS_TO_PFE(DDR_VIRT_TO_PHYS(p)))
-+
-+#define CBUS_VIRT_TO_PFE(v)	(((v) - CBUS_BASE_ADDR) + \
-+				PFE_CBUS_PHYS_BASE_ADDR)
-+#define CBUS_PFE_TO_VIRT(p)	(((unsigned long int)(p) - \
-+				PFE_CBUS_PHYS_BASE_ADDR) + CBUS_BASE_ADDR)
-+
-+/* The below part of the code is used in QOS control driver from host */
-+#define TMU_APB_BASE_ADDR       0xc1000000      /* TMU base address seen by
-+						 * pe's
-+						 */
-+
-+enum {
-+	CLASS0_ID = 0,
-+	CLASS1_ID,
-+	CLASS2_ID,
-+	CLASS3_ID,
-+	CLASS4_ID,
-+	CLASS5_ID,
-+	TMU0_ID,
-+	TMU1_ID,
-+	TMU2_ID,
-+	TMU3_ID,
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	UTIL_ID,
-+#endif
-+	MAX_PE
-+};
-+
-+#define CLASS_MASK	(BIT(CLASS0_ID) | BIT(CLASS1_ID) |\
-+			BIT(CLASS2_ID) | BIT(CLASS3_ID) |\
-+			BIT(CLASS4_ID) | BIT(CLASS5_ID))
-+#define CLASS_MAX_ID	CLASS5_ID
-+
-+#define TMU_MASK	(BIT(TMU0_ID) | BIT(TMU1_ID) |\
-+			BIT(TMU3_ID))
-+
-+#define TMU_MAX_ID	TMU3_ID
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+#define UTIL_MASK	BIT(UTIL_ID)
-+#endif
-+
-+struct pe_status {
-+	u32	cpu_state;
-+	u32	activity_counter;
-+	u32	rx;
-+	union {
-+	u32	tx;
-+	u32	tmu_qstatus;
-+	};
-+	u32	drop;
-+#if defined(CFG_PE_DEBUG)
-+	u32	debug_indicator;
-+	u32	debug[16];
-+#endif
-+} __aligned(16);
-+
-+struct pe_sync_mailbox {
-+	u32 stop;
-+	u32 stopped;
-+};
-+
-+/* Drop counter definitions */
-+
-+#define	CLASS_NUM_DROP_COUNTERS	13
-+#define	UTIL_NUM_DROP_COUNTERS	8
-+
-+/* PE information.
-+ * Structure containing PE's specific information. It is used to create
-+ * generic C functions common to all PE's.
-+ * Before using the library functions this structure needs to be initialized
-+ * with the different registers virtual addresses
-+ * (according to the ARM MMU mmaping). The default initialization supports a
-+ * virtual == physical mapping.
-+ */
-+struct pe_info {
-+	u32 dmem_base_addr;	/* PE's dmem base address */
-+	u32 pmem_base_addr;	/* PE's pmem base address */
-+	u32 pmem_size;	/* PE's pmem size */
-+
-+	void *mem_access_wdata;	/* PE's _MEM_ACCESS_WDATA register
-+				 * address
-+				 */
-+	void *mem_access_addr;	/* PE's _MEM_ACCESS_ADDR register
-+				 * address
-+				 */
-+	void *mem_access_rdata;	/* PE's _MEM_ACCESS_RDATA register
-+				 * address
-+				 */
-+};
-+
-+void pe_lmem_read(u32 *dst, u32 len, u32 offset);
-+void pe_lmem_write(u32 *src, u32 len, u32 offset);
-+
-+void pe_dmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len);
-+void pe_pmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len);
-+
-+u32 pe_pmem_read(int id, u32 addr, u8 size);
-+
-+void pe_dmem_write(int id, u32 val, u32 addr, u8 size);
-+u32 pe_dmem_read(int id, u32 addr, u8 size);
-+void class_pe_lmem_memcpy_to32(u32 dst, const void *src, unsigned int len);
-+void class_pe_lmem_memset(u32 dst, int val, unsigned int len);
-+void class_bus_write(u32 val, u32 addr, u8 size);
-+u32 class_bus_read(u32 addr, u8 size);
-+
-+#define class_bus_readl(addr)	class_bus_read(addr, 4)
-+#define class_bus_readw(addr)	class_bus_read(addr, 2)
-+#define class_bus_readb(addr)	class_bus_read(addr, 1)
-+
-+#define class_bus_writel(val, addr)	class_bus_write(val, addr, 4)
-+#define class_bus_writew(val, addr)	class_bus_write(val, addr, 2)
-+#define class_bus_writeb(val, addr)	class_bus_write(val, addr, 1)
-+
-+#define pe_dmem_readl(id, addr)	pe_dmem_read(id, addr, 4)
-+#define pe_dmem_readw(id, addr)	pe_dmem_read(id, addr, 2)
-+#define pe_dmem_readb(id, addr)	pe_dmem_read(id, addr, 1)
-+
-+#define pe_dmem_writel(id, val, addr)	pe_dmem_write(id, val, addr, 4)
-+#define pe_dmem_writew(id, val, addr)	pe_dmem_write(id, val, addr, 2)
-+#define pe_dmem_writeb(id, val, addr)	pe_dmem_write(id, val, addr, 1)
-+
-+/*int pe_load_elf_section(int id, const void *data, elf32_shdr *shdr); */
-+int pe_load_elf_section(int id, const void *data, struct elf32_shdr *shdr,
-+			struct device *dev);
-+
-+void pfe_lib_init(void *cbus_base, void *ddr_base, unsigned long ddr_phys_base,
-+		  unsigned int ddr_size);
-+void bmu_init(void *base, struct BMU_CFG *cfg);
-+void bmu_reset(void *base);
-+void bmu_enable(void *base);
-+void bmu_disable(void *base);
-+void bmu_set_config(void *base, struct BMU_CFG *cfg);
-+
-+/*
-+ * An enumerated type for loopback values.  This can be one of three values, no
-+ * loopback -normal operation, local loopback with internal loopback module of
-+ * MAC or PHY loopback which is through the external PHY.
-+ */
-+#ifndef __MAC_LOOP_ENUM__
-+#define __MAC_LOOP_ENUM__
-+enum mac_loop {LB_NONE, LB_EXT, LB_LOCAL};
-+#endif
-+
-+void gemac_init(void *base, void *config);
-+void gemac_disable_rx_checksum_offload(void *base);
-+void gemac_enable_rx_checksum_offload(void *base);
-+void gemac_set_mdc_div(void *base, int mdc_div);
-+void gemac_set_speed(void *base, enum mac_speed gem_speed);
-+void gemac_set_duplex(void *base, int duplex);
-+void gemac_set_mode(void *base, int mode);
-+void gemac_enable(void *base);
-+void gemac_tx_disable(void *base);
-+void gemac_tx_enable(void *base);
-+void gemac_disable(void *base);
-+void gemac_reset(void *base);
-+void gemac_set_address(void *base, struct spec_addr *addr);
-+struct spec_addr gemac_get_address(void *base);
-+void gemac_set_loop(void *base, enum mac_loop gem_loop);
-+void gemac_set_laddr1(void *base, struct pfe_mac_addr *address);
-+void gemac_set_laddr2(void *base, struct pfe_mac_addr *address);
-+void gemac_set_laddr3(void *base, struct pfe_mac_addr *address);
-+void gemac_set_laddr4(void *base, struct pfe_mac_addr *address);
-+void gemac_set_laddrN(void *base, struct pfe_mac_addr *address,
-+		      unsigned int entry_index);
-+void gemac_clear_laddr1(void *base);
-+void gemac_clear_laddr2(void *base);
-+void gemac_clear_laddr3(void *base);
-+void gemac_clear_laddr4(void *base);
-+void gemac_clear_laddrN(void *base, unsigned int entry_index);
-+struct pfe_mac_addr gemac_get_hash(void *base);
-+void gemac_set_hash(void *base, struct pfe_mac_addr *hash);
-+struct pfe_mac_addr gem_get_laddr1(void *base);
-+struct pfe_mac_addr gem_get_laddr2(void *base);
-+struct pfe_mac_addr gem_get_laddr3(void *base);
-+struct pfe_mac_addr gem_get_laddr4(void *base);
-+struct pfe_mac_addr gem_get_laddrN(void *base, unsigned int entry_index);
-+void gemac_set_config(void *base, struct gemac_cfg *cfg);
-+void gemac_allow_broadcast(void *base);
-+void gemac_no_broadcast(void *base);
-+void gemac_enable_1536_rx(void *base);
-+void gemac_disable_1536_rx(void *base);
-+void gemac_enable_rx_jmb(void *base);
-+void gemac_disable_rx_jmb(void *base);
-+void gemac_enable_stacked_vlan(void *base);
-+void gemac_disable_stacked_vlan(void *base);
-+void gemac_enable_pause_rx(void *base);
-+void gemac_disable_pause_rx(void *base);
-+void gemac_enable_copy_all(void *base);
-+void gemac_disable_copy_all(void *base);
-+void gemac_set_bus_width(void *base, int width);
-+void gemac_set_wol(void *base, u32 wol_conf);
-+
-+void gpi_init(void *base, struct gpi_cfg *cfg);
-+void gpi_reset(void *base);
-+void gpi_enable(void *base);
-+void gpi_disable(void *base);
-+void gpi_set_config(void *base, struct gpi_cfg *cfg);
-+
-+void class_init(struct class_cfg *cfg);
-+void class_reset(void);
-+void class_enable(void);
-+void class_disable(void);
-+void class_set_config(struct class_cfg *cfg);
-+
-+void tmu_reset(void);
-+void tmu_init(struct tmu_cfg *cfg);
-+void tmu_enable(u32 pe_mask);
-+void tmu_disable(u32 pe_mask);
-+u32  tmu_qstatus(u32 if_id);
-+u32  tmu_pkts_processed(u32 if_id);
-+
-+void util_init(struct util_cfg *cfg);
-+void util_reset(void);
-+void util_enable(void);
-+void util_disable(void);
-+
-+void hif_init(void);
-+void hif_tx_enable(void);
-+void hif_tx_disable(void);
-+void hif_rx_enable(void);
-+void hif_rx_disable(void);
-+
-+/* Get Chip Revision level
-+ *
-+ */
-+static inline unsigned int CHIP_REVISION(void)
-+{
-+	/*For LS1012A return always 1 */
-+	return 1;
-+}
-+
-+/* Start HIF rx DMA
-+ *
-+ */
-+static inline void hif_rx_dma_start(void)
-+{
-+	writel(HIF_CTRL_DMA_EN | HIF_CTRL_BDP_CH_START_WSTB, HIF_RX_CTRL);
-+}
-+
-+/* Start HIF tx DMA
-+ *
-+ */
-+static inline void hif_tx_dma_start(void)
-+{
-+	writel(HIF_CTRL_DMA_EN | HIF_CTRL_BDP_CH_START_WSTB, HIF_TX_CTRL);
-+}
-+
-+#endif /* _PFE_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_ctrl.h
-@@ -0,0 +1,112 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _PFE_CTRL_H_
-+#define _PFE_CTRL_H_
-+
-+#include <linux/dmapool.h>
-+
-+#include "pfe_mod.h"
-+#include "pfe/pfe.h"
-+
-+#define DMA_BUF_SIZE_128	0x80	/* enough for 1 conntracks */
-+#define DMA_BUF_SIZE_256	0x100
-+/* enough for 2 conntracks, 1 bridge entry or 1 multicast entry */
-+#define DMA_BUF_SIZE_512	0x200
-+/* 512bytes dma allocated buffers used by rtp relay feature */
-+#define DMA_BUF_MIN_ALIGNMENT	8
-+#define DMA_BUF_BOUNDARY	(4 * 1024)
-+/* bursts can not cross 4k boundary */
-+
-+#define CMD_TX_ENABLE	0x0501
-+#define CMD_TX_DISABLE	0x0502
-+
-+#define CMD_RX_LRO		0x0011
-+#define CMD_PKTCAP_ENABLE       0x0d01
-+#define CMD_QM_EXPT_RATE	0x020c
-+
-+#define CLASS_DM_SH_STATIC		(0x800)
-+#define CLASS_DM_CPU_TICKS		(CLASS_DM_SH_STATIC)
-+#define CLASS_DM_SYNC_MBOX		(0x808)
-+#define CLASS_DM_MSG_MBOX		(0x810)
-+#define CLASS_DM_DROP_CNTR		(0x820)
-+#define CLASS_DM_RESUME			(0x854)
-+#define CLASS_DM_PESTATUS		(0x860)
-+
-+#define TMU_DM_SH_STATIC		(0x80)
-+#define TMU_DM_CPU_TICKS		(TMU_DM_SH_STATIC)
-+#define TMU_DM_SYNC_MBOX		(0x88)
-+#define TMU_DM_MSG_MBOX			(0x90)
-+#define TMU_DM_RESUME			(0xA0)
-+#define TMU_DM_PESTATUS			(0xB0)
-+#define TMU_DM_CONTEXT			(0x300)
-+#define TMU_DM_TX_TRANS			(0x480)
-+
-+#define UTIL_DM_SH_STATIC		(0x0)
-+#define UTIL_DM_CPU_TICKS		(UTIL_DM_SH_STATIC)
-+#define UTIL_DM_SYNC_MBOX		(0x8)
-+#define UTIL_DM_MSG_MBOX		(0x10)
-+#define UTIL_DM_DROP_CNTR		(0x20)
-+#define UTIL_DM_RESUME			(0x40)
-+#define UTIL_DM_PESTATUS		(0x50)
-+
-+struct pfe_ctrl {
-+	struct mutex mutex; /* to serialize pfe control access */
-+	spinlock_t lock;
-+
-+	void *dma_pool;
-+	void *dma_pool_512;
-+	void *dma_pool_128;
-+
-+	struct device *dev;
-+
-+	void *hash_array_baseaddr;		/*
-+						 * Virtual base address of
-+						 * the conntrack hash array
-+						 */
-+	unsigned long hash_array_phys_baseaddr; /*
-+						 * Physical base address of
-+						 * the conntrack hash array
-+						 */
-+
-+	int (*event_cb)(u16, u16, u16*);
-+
-+	unsigned long sync_mailbox_baseaddr[MAX_PE]; /*
-+						      * Sync mailbox PFE
-+						      * internal address,
-+						      * initialized
-+						      * when parsing elf images
-+						      */
-+	unsigned long msg_mailbox_baseaddr[MAX_PE]; /*
-+						     * Msg mailbox PFE internal
-+						     * address, initialized
-+						     * when parsing elf images
-+						     */
-+	unsigned int sys_clk;			/* AXI clock value, in KHz */
-+};
-+
-+int pfe_ctrl_init(struct pfe *pfe);
-+void pfe_ctrl_exit(struct pfe *pfe);
-+int pe_sync_stop(struct pfe_ctrl *ctrl, int pe_mask);
-+void pe_start(struct pfe_ctrl *ctrl, int pe_mask);
-+int pe_reset_all(struct pfe_ctrl *ctrl);
-+void pfe_ctrl_suspend(struct pfe_ctrl *ctrl);
-+void pfe_ctrl_resume(struct pfe_ctrl *ctrl);
-+int relax(unsigned long end);
-+
-+#endif /* _PFE_CTRL_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_debugfs.h
-@@ -0,0 +1,25 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _PFE_DEBUGFS_H_
-+#define _PFE_DEBUGFS_H_
-+
-+int pfe_debugfs_init(struct pfe *pfe);
-+void pfe_debugfs_exit(struct pfe *pfe);
-+
-+#endif /* _PFE_DEBUGFS_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.h
-@@ -0,0 +1,184 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _PFE_ETH_H_
-+#define _PFE_ETH_H_
-+#include <linux/kernel.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+#include <linux/phy.h>
-+#include <linux/clk.h>
-+#include <linux/interrupt.h>
-+#include <linux/time.h>
-+
-+#define PFE_ETH_NAPI_STATS
-+#define PFE_ETH_TX_STATS
-+
-+#define PFE_ETH_FRAGS_MAX (65536 / HIF_RX_PKT_MIN_SIZE)
-+#define LRO_LEN_COUNT_MAX	32
-+#define LRO_NB_COUNT_MAX	32
-+
-+#define PFE_PAUSE_FLAG_ENABLE		1
-+#define PFE_PAUSE_FLAG_AUTONEG		2
-+
-+/* GEMAC configured by SW */
-+/* GEMAC configured by phy lines (not for MII/GMII) */
-+
-+#define GEMAC_SW_FULL_DUPLEX    BIT(9)
-+#define GEMAC_SW_SPEED_10M      (0 << 12)
-+#define GEMAC_SW_SPEED_100M     BIT(12)
-+#define GEMAC_SW_SPEED_1G       (2 << 12)
-+
-+#define GEMAC_NO_PHY            BIT(0)
-+
-+struct ls1012a_eth_platform_data {
-+	/* device specific information */
-+	u32 device_flags;
-+	char name[16];
-+
-+	/* board specific information */
-+	u32 mii_config;
-+	u32 phy_flags;
-+	u32 gem_id;
-+	u32 bus_id;
-+	u32 phy_id;
-+	u32 mdio_muxval;
-+	u8 mac_addr[ETH_ALEN];
-+};
-+
-+struct ls1012a_mdio_platform_data {
-+	int enabled;
-+	int irq[32];
-+	u32 phy_mask;
-+	int mdc_div;
-+};
-+
-+struct ls1012a_pfe_platform_data {
-+	struct ls1012a_eth_platform_data ls1012a_eth_pdata[3];
-+	struct ls1012a_mdio_platform_data ls1012a_mdio_pdata[3];
-+};
-+
-+#define NUM_GEMAC_SUPPORT	2
-+#define DRV_NAME		"pfe-eth"
-+#define DRV_VERSION		"1.0"
-+
-+#define LS1012A_TX_FAST_RECOVERY_TIMEOUT_MS	3
-+#define TX_POLL_TIMEOUT_MS	1000
-+
-+#define EMAC_TXQ_CNT	16
-+#define EMAC_TXQ_DEPTH	(HIF_TX_DESC_NT)
-+
-+#define JUMBO_FRAME_SIZE	10258
-+/*
-+ * Client Tx queue threshold, for txQ flush condition.
-+ * It must be smaller than the queue size (in case we ever change it in the
-+ * future).
-+ */
-+#define HIF_CL_TX_FLUSH_MARK	32
-+
-+/*
-+ * Max number of TX resources (HIF descriptors or skbs) that will be released
-+ * in a single go during batch recycling.
-+ * Should be lower than the flush mark so the SW can provide the HW with a
-+ * continuous stream of packets instead of bursts.
-+ */
-+#define TX_FREE_MAX_COUNT 16
-+#define EMAC_RXQ_CNT	3
-+#define EMAC_RXQ_DEPTH	HIF_RX_DESC_NT
-+/* make sure clients can receive a full burst of packets */
-+#define EMAC_RMON_TXBYTES_POS	0x00
-+#define EMAC_RMON_RXBYTES_POS	0x14
-+
-+#define EMAC_QUEUENUM_MASK      (emac_txq_cnt - 1)
-+#define EMAC_MDIO_TIMEOUT	1000
-+#define MAX_UC_SPEC_ADDR_REG 31
-+
-+struct pfe_eth_fast_timer {
-+	int queuenum;
-+	struct hrtimer timer;
-+	void *base;
-+};
-+
-+struct  pfe_eth_priv_s {
-+	struct pfe		*pfe;
-+	struct hif_client_s	client;
-+	struct napi_struct	lro_napi;
-+	struct napi_struct	low_napi;
-+	struct napi_struct	high_napi;
-+	int			low_tmu_q;
-+	int			high_tmu_q;
-+	struct net_device_stats stats;
-+	struct net_device	*ndev;
-+	int			id;
-+	int			promisc;
-+	unsigned int		msg_enable;
-+	unsigned int		usr_features;
-+
-+	spinlock_t		lock; /* protect member variables */
-+	unsigned int		event_status;
-+	int			irq;
-+	void			*EMAC_baseaddr;
-+	/* This points to the EMAC base from where we access PHY */
-+	void			*PHY_baseaddr;
-+	void			*GPI_baseaddr;
-+	/* PHY stuff */
-+	struct phy_device	*phydev;
-+	int			oldspeed;
-+	int			oldduplex;
-+	int			oldlink;
-+	/* mdio info */
-+	int			mdc_div;
-+	struct mii_bus		*mii_bus;
-+	struct clk		*gemtx_clk;
-+	int			wol;
-+	int			pause_flag;
-+
-+	int			default_priority;
-+	struct pfe_eth_fast_timer fast_tx_timeout[EMAC_TXQ_CNT];
-+
-+	struct ls1012a_eth_platform_data *einfo;
-+	struct sk_buff *skb_inflight[EMAC_RXQ_CNT + 6];
-+
-+#ifdef PFE_ETH_TX_STATS
-+	unsigned int stop_queue_total[EMAC_TXQ_CNT];
-+	unsigned int stop_queue_hif[EMAC_TXQ_CNT];
-+	unsigned int stop_queue_hif_client[EMAC_TXQ_CNT];
-+	unsigned int stop_queue_credit[EMAC_TXQ_CNT];
-+	unsigned int clean_fail[EMAC_TXQ_CNT];
-+	unsigned int was_stopped[EMAC_TXQ_CNT];
-+#endif
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+	unsigned int napi_counters[NAPI_MAX_COUNT];
-+#endif
-+	unsigned int frags_inflight[EMAC_RXQ_CNT + 6];
-+};
-+
-+struct pfe_eth {
-+	struct pfe_eth_priv_s *eth_priv[3];
-+};
-+
-+int pfe_eth_init(struct pfe *pfe);
-+void pfe_eth_exit(struct pfe *pfe);
-+int pfe_eth_suspend(struct net_device *dev);
-+int pfe_eth_resume(struct net_device *dev);
-+int pfe_eth_mdio_reset(struct mii_bus *bus);
-+
-+#endif /* _PFE_ETH_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_firmware.h
-@@ -0,0 +1,32 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _PFE_FIRMWARE_H_
-+#define _PFE_FIRMWARE_H_
-+
-+#define CLASS_FIRMWARE_FILENAME		"ppfe_class_ls1012a.elf"
-+#define TMU_FIRMWARE_FILENAME		"ppfe_tmu_ls1012a.elf"
-+
-+#define PFE_FW_CHECK_PASS		0
-+#define PFE_FW_CHECK_FAIL		1
-+#define NUM_PFE_FW				3
-+
-+int pfe_firmware_init(struct pfe *pfe);
-+void pfe_firmware_exit(struct pfe *pfe);
-+
-+#endif /* _PFE_FIRMWARE_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_hif.h
-@@ -0,0 +1,211 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _PFE_HIF_H_
-+#define _PFE_HIF_H_
-+
-+#include <linux/netdevice.h>
-+
-+#define HIF_NAPI_STATS
-+
-+#define HIF_CLIENT_QUEUES_MAX	16
-+#define HIF_RX_POLL_WEIGHT	64
-+
-+#define HIF_RX_PKT_MIN_SIZE 0x800 /* 2KB */
-+#define HIF_RX_PKT_MIN_SIZE_MASK ~(HIF_RX_PKT_MIN_SIZE - 1)
-+#define ROUND_MIN_RX_SIZE(_sz) (((_sz) + (HIF_RX_PKT_MIN_SIZE - 1)) \
-+					& HIF_RX_PKT_MIN_SIZE_MASK)
-+#define PRESENT_OFST_IN_PAGE(_buf) (((unsigned long int)(_buf) & (PAGE_SIZE \
-+					- 1)) & HIF_RX_PKT_MIN_SIZE_MASK)
-+
-+enum {
-+	NAPI_SCHED_COUNT = 0,
-+	NAPI_POLL_COUNT,
-+	NAPI_PACKET_COUNT,
-+	NAPI_DESC_COUNT,
-+	NAPI_FULL_BUDGET_COUNT,
-+	NAPI_CLIENT_FULL_COUNT,
-+	NAPI_MAX_COUNT
-+};
-+
-+/*
-+ * HIF_TX_DESC_NT value should be always greter than 4,
-+ * Otherwise HIF_TX_POLL_MARK will become zero.
-+ */
-+#define HIF_RX_DESC_NT		256
-+#define HIF_TX_DESC_NT		2048
-+
-+#define HIF_FIRST_BUFFER	BIT(0)
-+#define HIF_LAST_BUFFER		BIT(1)
-+#define HIF_DONT_DMA_MAP	BIT(2)
-+#define HIF_DATA_VALID		BIT(3)
-+#define HIF_TSO			BIT(4)
-+
-+enum {
-+	PFE_CL_GEM0 = 0,
-+	PFE_CL_GEM1,
-+	HIF_CLIENTS_MAX
-+};
-+
-+/*structure to store client queue info */
-+struct hif_rx_queue {
-+	struct rx_queue_desc *base;
-+	u32	size;
-+	u32	write_idx;
-+};
-+
-+struct hif_tx_queue {
-+	struct tx_queue_desc *base;
-+	u32	size;
-+	u32	ack_idx;
-+};
-+
-+/*Structure to store the client info */
-+struct hif_client {
-+	int	rx_qn;
-+	struct hif_rx_queue	rx_q[HIF_CLIENT_QUEUES_MAX];
-+	int	tx_qn;
-+	struct hif_tx_queue	tx_q[HIF_CLIENT_QUEUES_MAX];
-+};
-+
-+/*HIF hardware buffer descriptor */
-+struct hif_desc {
-+	u32 ctrl;
-+	u32 status;
-+	u32 data;
-+	u32 next;
-+};
-+
-+struct __hif_desc {
-+	u32 ctrl;
-+	u32 status;
-+	u32 data;
-+};
-+
-+struct hif_desc_sw {
-+	dma_addr_t data;
-+	u16 len;
-+	u8 client_id;
-+	u8 q_no;
-+	u16 flags;
-+};
-+
-+struct hif_hdr {
-+	u8 client_id;
-+	u8 q_num;
-+	u16 client_ctrl;
-+	u16 client_ctrl1;
-+};
-+
-+struct __hif_hdr {
-+	union {
-+		struct hif_hdr hdr;
-+		u32 word[2];
-+	};
-+};
-+
-+struct hif_ipsec_hdr {
-+	u16	sa_handle[2];
-+} __packed;
-+
-+/*  HIF_CTRL_TX... defines */
-+#define HIF_CTRL_TX_CHECKSUM		BIT(2)
-+
-+/*  HIF_CTRL_RX... defines */
-+#define HIF_CTRL_RX_OFFSET_OFST         (24)
-+#define HIF_CTRL_RX_CHECKSUMMED		BIT(2)
-+#define HIF_CTRL_RX_CONTINUED		BIT(1)
-+
-+struct pfe_hif {
-+	/* To store registered clients in hif layer */
-+	struct hif_client client[HIF_CLIENTS_MAX];
-+	struct hif_shm *shm;
-+	int	irq;
-+
-+	void	*descr_baseaddr_v;
-+	unsigned long	descr_baseaddr_p;
-+
-+	struct hif_desc *rx_base;
-+	u32	rx_ring_size;
-+	u32	rxtoclean_index;
-+	void	*rx_buf_addr[HIF_RX_DESC_NT];
-+	int	rx_buf_len[HIF_RX_DESC_NT];
-+	unsigned int qno;
-+	unsigned int client_id;
-+	unsigned int client_ctrl;
-+	unsigned int started;
-+
-+	struct hif_desc *tx_base;
-+	u32	tx_ring_size;
-+	u32	txtosend;
-+	u32	txtoclean;
-+	u32	txavail;
-+	u32	txtoflush;
-+	struct hif_desc_sw tx_sw_queue[HIF_TX_DESC_NT];
-+
-+/* tx_lock synchronizes hif packet tx as well as pfe_hif structure access */
-+	spinlock_t tx_lock;
-+/* lock synchronizes hif rx queue processing */
-+	spinlock_t lock;
-+	struct net_device	dummy_dev;
-+	struct napi_struct	napi;
-+	struct device *dev;
-+
-+#ifdef HIF_NAPI_STATS
-+	unsigned int napi_counters[NAPI_MAX_COUNT];
-+#endif
-+	struct tasklet_struct	tx_cleanup_tasklet;
-+};
-+
-+void __hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int
-+			q_no, void *data, u32 len, unsigned int flags);
-+int hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int q_no,
-+		 void *data, unsigned int len);
-+void __hif_tx_done_process(struct pfe_hif *hif, int count);
-+void hif_process_client_req(struct pfe_hif *hif, int req, int data1, int
-+				data2);
-+int pfe_hif_init(struct pfe *pfe);
-+void pfe_hif_exit(struct pfe *pfe);
-+void pfe_hif_rx_idle(struct pfe_hif *hif);
-+static inline void hif_tx_done_process(struct pfe_hif *hif, int count)
-+{
-+	spin_lock_bh(&hif->tx_lock);
-+	__hif_tx_done_process(hif, count);
-+	spin_unlock_bh(&hif->tx_lock);
-+}
-+
-+static inline void hif_tx_lock(struct pfe_hif *hif)
-+{
-+	spin_lock_bh(&hif->tx_lock);
-+}
-+
-+static inline void hif_tx_unlock(struct pfe_hif *hif)
-+{
-+	spin_unlock_bh(&hif->tx_lock);
-+}
-+
-+static inline int __hif_tx_avail(struct pfe_hif *hif)
-+{
-+	return hif->txavail;
-+}
-+
-+#define __memcpy8(dst, src)		memcpy(dst, src, 8)
-+#define __memcpy12(dst, src)		memcpy(dst, src, 12)
-+#define __memcpy(dst, src, len)		memcpy(dst, src, len)
-+
-+#endif /* _PFE_HIF_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.h
-@@ -0,0 +1,239 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _PFE_HIF_LIB_H_
-+#define _PFE_HIF_LIB_H_
-+
-+#include "pfe_hif.h"
-+
-+#define HIF_CL_REQ_TIMEOUT	10
-+#define GFP_DMA_PFE 0
-+
-+enum {
-+	REQUEST_CL_REGISTER = 0,
-+	REQUEST_CL_UNREGISTER,
-+	HIF_REQUEST_MAX
-+};
-+
-+enum {
-+	/* Event to indicate that client rx queue is reached water mark level */
-+	EVENT_HIGH_RX_WM = 0,
-+	/* Event to indicate that, packet received for client */
-+	EVENT_RX_PKT_IND,
-+	/* Event to indicate that, packet tx done for client */
-+	EVENT_TXDONE_IND,
-+	HIF_EVENT_MAX
-+};
-+
-+/*structure to store client queue info */
-+
-+/*structure to store client queue info */
-+struct hif_client_rx_queue {
-+	struct rx_queue_desc *base;
-+	u32	size;
-+	u32	read_idx;
-+	u32	write_idx;
-+};
-+
-+struct hif_client_tx_queue {
-+	struct tx_queue_desc *base;
-+	u32	size;
-+	u32	read_idx;
-+	u32	write_idx;
-+	u32	tx_pending;
-+	unsigned long jiffies_last_packet;
-+	u32	nocpy_flag;
-+	u32	prev_tmu_tx_pkts;
-+	u32	done_tmu_tx_pkts;
-+};
-+
-+struct hif_client_s {
-+	int	id;
-+	int	tx_qn;
-+	int	rx_qn;
-+	void	*rx_qbase;
-+	void	*tx_qbase;
-+	int	tx_qsize;
-+	int	rx_qsize;
-+	int	cpu_id;
-+	struct hif_client_tx_queue tx_q[HIF_CLIENT_QUEUES_MAX];
-+	struct hif_client_rx_queue rx_q[HIF_CLIENT_QUEUES_MAX];
-+	int (*event_handler)(void *priv, int event, int data);
-+	unsigned long queue_mask[HIF_EVENT_MAX];
-+	struct pfe *pfe;
-+	void *priv;
-+};
-+
-+/*
-+ * Client specific shared memory
-+ * It contains number of Rx/Tx queues, base addresses and queue sizes
-+ */
-+struct hif_client_shm {
-+	u32 ctrl; /*0-7: number of Rx queues, 8-15: number of tx queues */
-+	unsigned long rx_qbase; /*Rx queue base address */
-+	u32 rx_qsize; /*each Rx queue size, all Rx queues are of same size */
-+	unsigned long tx_qbase; /* Tx queue base address */
-+	u32 tx_qsize; /*each Tx queue size, all Tx queues are of same size */
-+};
-+
-+/*Client shared memory ctrl bit description */
-+#define CLIENT_CTRL_RX_Q_CNT_OFST	0
-+#define CLIENT_CTRL_TX_Q_CNT_OFST	8
-+#define CLIENT_CTRL_RX_Q_CNT(ctrl)	(((ctrl) >> CLIENT_CTRL_RX_Q_CNT_OFST) \
-+						& 0xFF)
-+#define CLIENT_CTRL_TX_Q_CNT(ctrl)	(((ctrl) >> CLIENT_CTRL_TX_Q_CNT_OFST) \
-+						& 0xFF)
-+
-+/*
-+ * Shared memory used to communicate between HIF driver and host/client drivers
-+ * Before starting the hif driver rx_buf_pool ans rx_buf_pool_cnt should be
-+ * initialized with host buffers and buffers count in the pool.
-+ * rx_buf_pool_cnt should be >= HIF_RX_DESC_NT.
-+ *
-+ */
-+struct hif_shm {
-+	u32 rx_buf_pool_cnt; /*Number of rx buffers available*/
-+	/*Rx buffers required to initialize HIF rx descriptors */
-+	void *rx_buf_pool[HIF_RX_DESC_NT];
-+	unsigned long g_client_status[2]; /*Global client status bit mask */
-+	/* Client specific shared memory */
-+	struct hif_client_shm client[HIF_CLIENTS_MAX];
-+};
-+
-+#define CL_DESC_OWN	BIT(31)
-+/* This sets owner ship to HIF driver */
-+#define CL_DESC_LAST	BIT(30)
-+/* This indicates last packet for multi buffers handling */
-+#define CL_DESC_FIRST	BIT(29)
-+/* This indicates first packet for multi buffers handling */
-+
-+#define CL_DESC_BUF_LEN(x)		((x) & 0xFFFF)
-+#define CL_DESC_FLAGS(x)		(((x) & 0xF) << 16)
-+#define CL_DESC_GET_FLAGS(x)		(((x) >> 16) & 0xF)
-+
-+struct rx_queue_desc {
-+	void *data;
-+	u32	ctrl; /*0-15bit len, 16-20bit flags, 31bit owner*/
-+	u32	client_ctrl;
-+};
-+
-+struct tx_queue_desc {
-+	void *data;
-+	u32	ctrl; /*0-15bit len, 16-20bit flags, 31bit owner*/
-+};
-+
-+/* HIF Rx is not working properly for 2-byte aligned buffers and
-+ * ip_header should be 4byte aligned for better iperformance.
-+ * "ip_header = 64 + 6(hif_header) + 14 (MAC Header)" will be 4byte aligned.
-+ */
-+#define PFE_PKT_HEADER_SZ	sizeof(struct hif_hdr)
-+/* must be big enough for headroom, pkt size and skb shared info */
-+#define PFE_BUF_SIZE		2048
-+#define PFE_PKT_HEADROOM	128
-+
-+#define SKB_SHARED_INFO_SIZE   (sizeof(struct skb_shared_info))
-+#define PFE_PKT_SIZE		(PFE_BUF_SIZE - PFE_PKT_HEADROOM \
-+				 - SKB_SHARED_INFO_SIZE)
-+#define MAX_L2_HDR_SIZE		14	/* Not correct for VLAN/PPPoE */
-+#define MAX_L3_HDR_SIZE		20	/* Not correct for IPv6 */
-+#define MAX_L4_HDR_SIZE		60	/* TCP with maximum options */
-+#define MAX_HDR_SIZE		(MAX_L2_HDR_SIZE + MAX_L3_HDR_SIZE \
-+				 + MAX_L4_HDR_SIZE)
-+/* Used in page mode to clamp packet size to the maximum supported by the hif
-+ *hw interface (<16KiB)
-+ */
-+#define MAX_PFE_PKT_SIZE	16380UL
-+
-+extern unsigned int pfe_pkt_size;
-+extern unsigned int pfe_pkt_headroom;
-+extern unsigned int page_mode;
-+extern unsigned int lro_mode;
-+extern unsigned int tx_qos;
-+extern unsigned int emac_txq_cnt;
-+
-+int pfe_hif_lib_init(struct pfe *pfe);
-+void pfe_hif_lib_exit(struct pfe *pfe);
-+int hif_lib_client_register(struct hif_client_s *client);
-+int hif_lib_client_unregister(struct  hif_client_s *client);
-+void __hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void
-+				*data, unsigned int len, u32 client_ctrl,
-+				unsigned int flags, void *client_data);
-+int hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void *data,
-+		     unsigned int len, u32 client_ctrl, void *client_data);
-+void hif_lib_indicate_client(int cl_id, int event, int data);
-+int hif_lib_event_handler_start(struct hif_client_s *client, int event, int
-+					data);
-+int hif_lib_tmu_queue_start(struct hif_client_s *client, int qno);
-+int hif_lib_tmu_queue_stop(struct hif_client_s *client, int qno);
-+void *hif_lib_tx_get_next_complete(struct hif_client_s *client, int qno,
-+				   unsigned int *flags, int count);
-+void *hif_lib_receive_pkt(struct hif_client_s *client, int qno, int *len, int
-+				*ofst, unsigned int *rx_ctrl,
-+				unsigned int *desc_ctrl, void **priv_data);
-+void hif_lib_set_rx_cpu_affinity(struct hif_client_s *client, int cpu_id);
-+void hif_lib_set_tx_queue_nocpy(struct hif_client_s *client, int qno, int
-+					enable);
-+static inline int hif_lib_tx_avail(struct hif_client_s *client, unsigned int
-+					qno)
-+{
-+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
-+
-+	return (queue->size - queue->tx_pending);
-+}
-+
-+static inline int hif_lib_get_tx_wr_index(struct hif_client_s *client, unsigned
-+						int qno)
-+{
-+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
-+
-+	return queue->write_idx;
-+}
-+
-+static inline int hif_lib_tx_pending(struct hif_client_s *client, unsigned int
-+					qno)
-+{
-+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
-+
-+	return queue->tx_pending;
-+}
-+
-+#define hif_lib_tx_credit_avail(pfe, id, qno) \
-+				((pfe)->tmu_credit.tx_credit[id][qno])
-+
-+#define hif_lib_tx_credit_max(pfe, id, qno) \
-+				((pfe)->tmu_credit.tx_credit_max[id][qno])
-+
-+/*
-+ * Test comment
-+ */
-+#define hif_lib_tx_credit_use(pfe, id, qno, credit)			\
-+	({ typeof(pfe) pfe_ = pfe;					\
-+		typeof(id) id_ = id;					\
-+		typeof(qno) qno_ = qno_;				\
-+		typeof(credit) credit_ = credit;			\
-+		do {							\
-+			if (tx_qos) {					\
-+				(pfe_)->tmu_credit.tx_credit[id_][qno_]\
-+					 -= credit_;			\
-+				(pfe_)->tmu_credit.tx_packets[id_][qno_]\
-+					+= credit_;			\
-+			}						\
-+		} while (0);						\
-+	})
-+
-+#endif /* _PFE_HIF_LIB_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_hw.h
-@@ -0,0 +1,27 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _PFE_HW_H_
-+#define _PFE_HW_H_
-+
-+#define PE_SYS_CLK_RATIO	1	/* SYS/AXI = 250MHz, HFE = 500MHz */
-+
-+int pfe_hw_init(struct pfe *pfe, int resume);
-+void pfe_hw_exit(struct pfe *pfe);
-+
-+#endif /* _PFE_HW_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_mod.h
-@@ -0,0 +1,112 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _PFE_MOD_H_
-+#define _PFE_MOD_H_
-+
-+#include <linux/device.h>
-+#include <linux/elf.h>
-+
-+struct pfe;
-+
-+#include "pfe_hw.h"
-+#include "pfe_firmware.h"
-+#include "pfe_ctrl.h"
-+#include "pfe_hif.h"
-+#include "pfe_hif_lib.h"
-+#include "pfe_eth.h"
-+#include "pfe_sysfs.h"
-+#include "pfe_perfmon.h"
-+#include "pfe_debugfs.h"
-+
-+#define PHYID_MAX_VAL 32
-+
-+struct pfe_tmu_credit {
-+	/* Number of allowed TX packet in-flight, matches TMU queue size */
-+	unsigned int tx_credit[NUM_GEMAC_SUPPORT][EMAC_TXQ_CNT];
-+	unsigned int tx_credit_max[NUM_GEMAC_SUPPORT][EMAC_TXQ_CNT];
-+	unsigned int tx_packets[NUM_GEMAC_SUPPORT][EMAC_TXQ_CNT];
-+};
-+
-+struct pfe {
-+	struct regmap	*scfg;
-+	unsigned long ddr_phys_baseaddr;
-+	void *ddr_baseaddr;
-+	unsigned int ddr_size;
-+	void *cbus_baseaddr;
-+	void *apb_baseaddr;
-+	unsigned long iram_phys_baseaddr;
-+	void *iram_baseaddr;
-+	unsigned long ipsec_phys_baseaddr;
-+	void *ipsec_baseaddr;
-+	int hif_irq;
-+	int wol_irq;
-+	int hif_client_irq;
-+	struct device *dev;
-+	struct dentry *dentry;
-+	struct pfe_ctrl ctrl;
-+	struct pfe_hif hif;
-+	struct pfe_eth eth;
-+	struct hif_client_s *hif_client[HIF_CLIENTS_MAX];
-+#if defined(CFG_DIAGS)
-+	struct pfe_diags diags;
-+#endif
-+	struct pfe_tmu_credit tmu_credit;
-+	struct pfe_cpumon cpumon;
-+	struct pfe_memmon memmon;
-+	int wake;
-+	int mdio_muxval[PHYID_MAX_VAL];
-+	struct clk *hfe_clock;
-+};
-+
-+extern struct pfe *pfe;
-+
-+int pfe_probe(struct pfe *pfe);
-+int pfe_remove(struct pfe *pfe);
-+
-+/* DDR Mapping in reserved memory*/
-+#define ROUTE_TABLE_BASEADDR	0
-+#define ROUTE_TABLE_HASH_BITS	15	/* 32K entries */
-+#define ROUTE_TABLE_SIZE	((1 << ROUTE_TABLE_HASH_BITS) \
-+				  * CLASS_ROUTE_SIZE)
-+#define BMU2_DDR_BASEADDR	(ROUTE_TABLE_BASEADDR + ROUTE_TABLE_SIZE)
-+#define BMU2_BUF_COUNT		(4096 - 256)
-+/* This is to get a total DDR size of 12MiB */
-+#define BMU2_DDR_SIZE		(DDR_BUF_SIZE * BMU2_BUF_COUNT)
-+#define UTIL_CODE_BASEADDR	(BMU2_DDR_BASEADDR + BMU2_DDR_SIZE)
-+#define UTIL_CODE_SIZE		(128 * SZ_1K)
-+#define UTIL_DDR_DATA_BASEADDR	(UTIL_CODE_BASEADDR + UTIL_CODE_SIZE)
-+#define UTIL_DDR_DATA_SIZE	(64 * SZ_1K)
-+#define CLASS_DDR_DATA_BASEADDR	(UTIL_DDR_DATA_BASEADDR + UTIL_DDR_DATA_SIZE)
-+#define CLASS_DDR_DATA_SIZE	(32 * SZ_1K)
-+#define TMU_DDR_DATA_BASEADDR	(CLASS_DDR_DATA_BASEADDR + CLASS_DDR_DATA_SIZE)
-+#define TMU_DDR_DATA_SIZE	(32 * SZ_1K)
-+#define TMU_LLM_BASEADDR	(TMU_DDR_DATA_BASEADDR + TMU_DDR_DATA_SIZE)
-+#define TMU_LLM_QUEUE_LEN	(8 * 512)
-+/* Must be power of two and at least 16 * 8 = 128 bytes */
-+#define TMU_LLM_SIZE		(4 * 16 * TMU_LLM_QUEUE_LEN)
-+/* (4 TMU's x 16 queues x queue_len) */
-+
-+#define DDR_MAX_SIZE		(TMU_LLM_BASEADDR + TMU_LLM_SIZE)
-+
-+/* LMEM Mapping */
-+#define BMU1_LMEM_BASEADDR	0
-+#define BMU1_BUF_COUNT		256
-+#define BMU1_LMEM_SIZE		(LMEM_BUF_SIZE * BMU1_BUF_COUNT)
-+
-+#endif /* _PFE_MOD_H */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_perfmon.h
-@@ -0,0 +1,38 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _PFE_PERFMON_H_
-+#define _PFE_PERFMON_H_
-+
-+#include "pfe/pfe.h"
-+
-+#define	CT_CPUMON_INTERVAL	(1 * TIMER_TICKS_PER_SEC)
-+
-+struct pfe_cpumon {
-+	u32 cpu_usage_pct[MAX_PE];
-+	u32 class_usage_pct;
-+};
-+
-+struct pfe_memmon {
-+	u32 kernel_memory_allocated;
-+};
-+
-+int pfe_perfmon_init(struct pfe *pfe);
-+void pfe_perfmon_exit(struct pfe *pfe);
-+
-+#endif /* _PFE_PERFMON_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_sysfs.h
-@@ -0,0 +1,29 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _PFE_SYSFS_H_
-+#define _PFE_SYSFS_H_
-+
-+#include <linux/proc_fs.h>
-+
-+u32 qm_read_drop_stat(u32 tmu, u32 queue, u32 *total_drops, int do_reset);
-+
-+int pfe_sysfs_init(struct pfe *pfe);
-+void pfe_sysfs_exit(struct pfe *pfe);
-+
-+#endif /* _PFE_SYSFS_H_ */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0286-staging-fsl_ppfe-eth-introduce-pfe-driver.patch b/target/linux/layerscape/patches-5.4/701-net-0286-staging-fsl_ppfe-eth-introduce-pfe-driver.patch
deleted file mode 100644
index 13fd4f90d1..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0286-staging-fsl_ppfe-eth-introduce-pfe-driver.patch
+++ /dev/null
@@ -1,7994 +0,0 @@
-From fccb0e1e07fc0750fd081ab52ed94ee13f6b360f Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Sat, 16 Sep 2017 14:22:17 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: introduce pfe driver
-
-	This patch introduces Linux support for NXP's LS1012A Packet
-Forwarding Engine (pfe_eth). LS1012A uses hardware packet forwarding
-engine to provide high performance Ethernet interfaces. The device
-includes two Ethernet ports.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
----
- drivers/staging/fsl_ppfe/Kconfig                |   20 +
- drivers/staging/fsl_ppfe/Makefile               |   19 +
- drivers/staging/fsl_ppfe/TODO                   |    2 +
- drivers/staging/fsl_ppfe/pfe_ctrl.c             |  238 +++
- drivers/staging/fsl_ppfe/pfe_debugfs.c          |  111 ++
- drivers/staging/fsl_ppfe/pfe_eth.c              | 2434 +++++++++++++++++++++++
- drivers/staging/fsl_ppfe/pfe_firmware.c         |  314 +++
- drivers/staging/fsl_ppfe/pfe_hal.c              | 1516 ++++++++++++++
- drivers/staging/fsl_ppfe/pfe_hif.c              | 1094 ++++++++++
- drivers/staging/fsl_ppfe/pfe_hif_lib.c          |  638 ++++++
- drivers/staging/fsl_ppfe/pfe_hw.c               |  176 ++
- drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c |  394 ++++
- drivers/staging/fsl_ppfe/pfe_mod.c              |  141 ++
- drivers/staging/fsl_ppfe/pfe_sysfs.c            |  818 ++++++++
- 14 files changed, 7915 insertions(+)
- create mode 100644 drivers/staging/fsl_ppfe/Kconfig
- create mode 100644 drivers/staging/fsl_ppfe/Makefile
- create mode 100644 drivers/staging/fsl_ppfe/TODO
- create mode 100644 drivers/staging/fsl_ppfe/pfe_ctrl.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_debugfs.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_eth.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_firmware.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_hal.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_hif.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_hif_lib.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_hw.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_mod.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_sysfs.c
-
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/Kconfig
-@@ -0,0 +1,20 @@
-+#
-+# Freescale Programmable Packet Forwarding Engine driver
-+#
-+config FSL_PPFE
-+	bool "Freescale PPFE Driver"
-+	default n
-+	---help---
-+	Freescale LS1012A SoC has a Programmable Packet Forwarding Engine.
-+	It provides two high performance ethernet interfaces.
-+	This driver initializes, programs and controls the PPFE.
-+	Use this driver to enable network connectivity on LS1012A platforms.
-+
-+if FSL_PPFE
-+
-+config FSL_PPFE_UTIL_DISABLED
-+	bool "Disable PPFE UTIL Processor Engine"
-+	---help---
-+	UTIL PE has to be enabled only if required.
-+
-+endif # FSL_PPFE
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/Makefile
-@@ -0,0 +1,19 @@
-+#
-+# Makefile for Freesecale PPFE driver
-+#
-+
-+ccflags-y +=  -I$(src)/include  -I$(src)
-+
-+obj-m += pfe.o
-+
-+pfe-y += pfe_mod.o \
-+	pfe_hw.o \
-+	pfe_firmware.o \
-+	pfe_ctrl.o \
-+	pfe_hif.o \
-+	pfe_hif_lib.o\
-+	pfe_eth.o \
-+	pfe_sysfs.o \
-+	pfe_debugfs.o \
-+	pfe_ls1012a_platform.o \
-+	pfe_hal.o
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/TODO
-@@ -0,0 +1,2 @@
-+TODO:
-+	- provide pfe pe monitoring support
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_ctrl.c
-@@ -0,0 +1,238 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/module.h>
-+#include <linux/list.h>
-+#include <linux/kthread.h>
-+
-+#include "pfe_mod.h"
-+#include "pfe_ctrl.h"
-+
-+#define TIMEOUT_MS	1000
-+
-+int relax(unsigned long end)
-+{
-+	if (time_after(jiffies, end)) {
-+		if (time_after(jiffies, end + (TIMEOUT_MS * HZ) / 1000))
-+			return -1;
-+
-+		if (need_resched())
-+			schedule();
-+	}
-+
-+	return 0;
-+}
-+
-+void pfe_ctrl_suspend(struct pfe_ctrl *ctrl)
-+{
-+	int id;
-+
-+	mutex_lock(&ctrl->mutex);
-+
-+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++)
-+		pe_dmem_write(id, cpu_to_be32(0x1), CLASS_DM_RESUME, 4);
-+
-+	for (id = TMU0_ID; id <= TMU_MAX_ID; id++) {
-+		if (id == TMU2_ID)
-+			continue;
-+		pe_dmem_write(id, cpu_to_be32(0x1), TMU_DM_RESUME, 4);
-+	}
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	pe_dmem_write(UTIL_ID, cpu_to_be32(0x1), UTIL_DM_RESUME, 4);
-+#endif
-+	mutex_unlock(&ctrl->mutex);
-+}
-+
-+void pfe_ctrl_resume(struct pfe_ctrl *ctrl)
-+{
-+	int pe_mask = CLASS_MASK | TMU_MASK;
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	pe_mask |= UTIL_MASK;
-+#endif
-+	mutex_lock(&ctrl->mutex);
-+	pe_start(&pfe->ctrl, pe_mask);
-+	mutex_unlock(&ctrl->mutex);
-+}
-+
-+/* PE sync stop.
-+ * Stops packet processing for a list of PE's (specified using a bitmask).
-+ * The caller must hold ctrl->mutex.
-+ *
-+ * @param ctrl		Control context
-+ * @param pe_mask	Mask of PE id's to stop
-+ *
-+ */
-+int pe_sync_stop(struct pfe_ctrl *ctrl, int pe_mask)
-+{
-+	struct pe_sync_mailbox *mbox;
-+	int pe_stopped = 0;
-+	unsigned long end = jiffies + 2;
-+	int i;
-+
-+	pe_mask &= 0x2FF;  /*Exclude Util + TMU2 */
-+
-+	for (i = 0; i < MAX_PE; i++)
-+		if (pe_mask & (1 << i)) {
-+			mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
-+
-+			pe_dmem_write(i, cpu_to_be32(0x1), (unsigned
-+					long)&mbox->stop, 4);
-+		}
-+
-+	while (pe_stopped != pe_mask) {
-+		for (i = 0; i < MAX_PE; i++)
-+			if ((pe_mask & (1 << i)) && !(pe_stopped & (1 << i))) {
-+				mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
-+
-+				if (pe_dmem_read(i, (unsigned
-+					long)&mbox->stopped, 4) &
-+					cpu_to_be32(0x1))
-+					pe_stopped |= (1 << i);
-+			}
-+
-+		if (relax(end) < 0)
-+			goto err;
-+	}
-+
-+	return 0;
-+
-+err:
-+	pr_err("%s: timeout, %x %x\n", __func__, pe_mask, pe_stopped);
-+
-+	for (i = 0; i < MAX_PE; i++)
-+		if (pe_mask & (1 << i)) {
-+			mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
-+
-+			pe_dmem_write(i, cpu_to_be32(0x0), (unsigned
-+					long)&mbox->stop, 4);
-+	}
-+
-+	return -EIO;
-+}
-+
-+/* PE start.
-+ * Starts packet processing for a list of PE's (specified using a bitmask).
-+ * The caller must hold ctrl->mutex.
-+ *
-+ * @param ctrl		Control context
-+ * @param pe_mask	Mask of PE id's to start
-+ *
-+ */
-+void pe_start(struct pfe_ctrl *ctrl, int pe_mask)
-+{
-+	struct pe_sync_mailbox *mbox;
-+	int i;
-+
-+	for (i = 0; i < MAX_PE; i++)
-+		if (pe_mask & (1 << i)) {
-+			mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
-+
-+			pe_dmem_write(i, cpu_to_be32(0x0), (unsigned
-+					long)&mbox->stop, 4);
-+		}
-+}
-+
-+/* This function will ensure all PEs are put in to idle state */
-+int pe_reset_all(struct pfe_ctrl *ctrl)
-+{
-+	struct pe_sync_mailbox *mbox;
-+	int pe_stopped = 0;
-+	unsigned long end = jiffies + 2;
-+	int i;
-+	int pe_mask  = CLASS_MASK | TMU_MASK;
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	pe_mask |= UTIL_MASK;
-+#endif
-+
-+	for (i = 0; i < MAX_PE; i++)
-+		if (pe_mask & (1 << i)) {
-+			mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
-+
-+			pe_dmem_write(i, cpu_to_be32(0x2), (unsigned
-+					long)&mbox->stop, 4);
-+		}
-+
-+	while (pe_stopped != pe_mask) {
-+		for (i = 0; i < MAX_PE; i++)
-+			if ((pe_mask & (1 << i)) && !(pe_stopped & (1 << i))) {
-+				mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
-+
-+				if (pe_dmem_read(i, (unsigned long)
-+							&mbox->stopped, 4) &
-+						cpu_to_be32(0x1))
-+					pe_stopped |= (1 << i);
-+			}
-+
-+		if (relax(end) < 0)
-+			goto err;
-+	}
-+
-+	return 0;
-+
-+err:
-+	pr_err("%s: timeout, %x %x\n", __func__, pe_mask, pe_stopped);
-+	return -EIO;
-+}
-+
-+int pfe_ctrl_init(struct pfe *pfe)
-+{
-+	struct pfe_ctrl *ctrl = &pfe->ctrl;
-+	int id;
-+
-+	pr_info("%s\n", __func__);
-+
-+	mutex_init(&ctrl->mutex);
-+	spin_lock_init(&ctrl->lock);
-+
-+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) {
-+		ctrl->sync_mailbox_baseaddr[id] = CLASS_DM_SYNC_MBOX;
-+		ctrl->msg_mailbox_baseaddr[id] = CLASS_DM_MSG_MBOX;
-+	}
-+
-+	for (id = TMU0_ID; id <= TMU_MAX_ID; id++) {
-+		if (id == TMU2_ID)
-+			continue;
-+		ctrl->sync_mailbox_baseaddr[id] = TMU_DM_SYNC_MBOX;
-+		ctrl->msg_mailbox_baseaddr[id] = TMU_DM_MSG_MBOX;
-+	}
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	ctrl->sync_mailbox_baseaddr[UTIL_ID] = UTIL_DM_SYNC_MBOX;
-+	ctrl->msg_mailbox_baseaddr[UTIL_ID] = UTIL_DM_MSG_MBOX;
-+#endif
-+
-+	ctrl->hash_array_baseaddr = pfe->ddr_baseaddr + ROUTE_TABLE_BASEADDR;
-+	ctrl->hash_array_phys_baseaddr = pfe->ddr_phys_baseaddr +
-+						ROUTE_TABLE_BASEADDR;
-+
-+	ctrl->dev = pfe->dev;
-+
-+	pr_info("%s finished\n", __func__);
-+
-+	return 0;
-+}
-+
-+void pfe_ctrl_exit(struct pfe *pfe)
-+{
-+	pr_info("%s\n", __func__);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_debugfs.c
-@@ -0,0 +1,111 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/debugfs.h>
-+#include <linux/platform_device.h>
-+
-+#include "pfe_mod.h"
-+
-+static int dmem_show(struct seq_file *s, void *unused)
-+{
-+	u32 dmem_addr, val;
-+	int id = (long int)s->private;
-+	int i;
-+
-+	for (dmem_addr = 0; dmem_addr < CLASS_DMEM_SIZE; dmem_addr += 8 * 4) {
-+		seq_printf(s, "%04x:", dmem_addr);
-+
-+		for (i = 0; i < 8; i++) {
-+			val = pe_dmem_read(id, dmem_addr + i * 4, 4);
-+			seq_printf(s, " %02x %02x %02x %02x", val & 0xff,
-+				   (val >> 8) & 0xff, (val >> 16) & 0xff,
-+				   (val >> 24) & 0xff);
-+		}
-+
-+		seq_puts(s, "\n");
-+	}
-+
-+	return 0;
-+}
-+
-+static int dmem_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, dmem_show, inode->i_private);
-+}
-+
-+static const struct file_operations dmem_fops = {
-+	.open		= dmem_open,
-+	.read		= seq_read,
-+	.llseek		= seq_lseek,
-+	.release	= single_release,
-+};
-+
-+int pfe_debugfs_init(struct pfe *pfe)
-+{
-+	struct dentry *d;
-+
-+	pr_info("%s\n", __func__);
-+
-+	pfe->dentry = debugfs_create_dir("pfe", NULL);
-+	if (IS_ERR_OR_NULL(pfe->dentry))
-+		goto err_dir;
-+
-+	d = debugfs_create_file("pe0_dmem", 0444, pfe->dentry, (void *)0,
-+				&dmem_fops);
-+	if (IS_ERR_OR_NULL(d))
-+		goto err_pe;
-+
-+	d = debugfs_create_file("pe1_dmem", 0444, pfe->dentry, (void *)1,
-+				&dmem_fops);
-+	if (IS_ERR_OR_NULL(d))
-+		goto err_pe;
-+
-+	d = debugfs_create_file("pe2_dmem", 0444, pfe->dentry, (void *)2,
-+				&dmem_fops);
-+	if (IS_ERR_OR_NULL(d))
-+		goto err_pe;
-+
-+	d = debugfs_create_file("pe3_dmem", 0444, pfe->dentry, (void *)3,
-+				&dmem_fops);
-+	if (IS_ERR_OR_NULL(d))
-+		goto err_pe;
-+
-+	d = debugfs_create_file("pe4_dmem", 0444, pfe->dentry, (void *)4,
-+				&dmem_fops);
-+	if (IS_ERR_OR_NULL(d))
-+		goto err_pe;
-+
-+	d = debugfs_create_file("pe5_dmem", 0444, pfe->dentry, (void *)5,
-+				&dmem_fops);
-+	if (IS_ERR_OR_NULL(d))
-+		goto err_pe;
-+
-+	return 0;
-+
-+err_pe:
-+	debugfs_remove_recursive(pfe->dentry);
-+
-+err_dir:
-+	return -1;
-+}
-+
-+void pfe_debugfs_exit(struct pfe *pfe)
-+{
-+	debugfs_remove_recursive(pfe->dentry);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -0,0 +1,2434 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+/* @pfe_eth.c.
-+ *  Ethernet driver for to handle exception path for PFE.
-+ *  - uses HIF functions to send/receive packets.
-+ *  - uses ctrl function to start/stop interfaces.
-+ *  - uses direct register accesses to control phy operation.
-+ */
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/interrupt.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+#include <linux/phy.h>
-+#include <linux/timer.h>
-+#include <linux/hrtimer.h>
-+#include <linux/platform_device.h>
-+
-+#include <net/ip.h>
-+#include <net/sock.h>
-+
-+#include <linux/io.h>
-+#include <asm/irq.h>
-+#include <linux/delay.h>
-+#include <linux/regmap.h>
-+#include <linux/i2c.h>
-+
-+#if defined(CONFIG_NF_CONNTRACK_MARK)
-+#include <net/netfilter/nf_conntrack.h>
-+#endif
-+
-+#include "pfe_mod.h"
-+#include "pfe_eth.h"
-+
-+static void *cbus_emac_base[3];
-+static void *cbus_gpi_base[3];
-+
-+/* Forward Declaration */
-+static void pfe_eth_exit_one(struct pfe_eth_priv_s *priv);
-+static void pfe_eth_flush_tx(struct pfe_eth_priv_s *priv);
-+static void pfe_eth_flush_txQ(struct pfe_eth_priv_s *priv, int tx_q_num, int
-+				from_tx, int n_desc);
-+
-+unsigned int gemac_regs[] = {
-+	0x0004, /* Interrupt event */
-+	0x0008, /* Interrupt mask */
-+	0x0024, /* Ethernet control */
-+	0x0064, /* MIB Control/Status */
-+	0x0084, /* Receive control/status */
-+	0x00C4, /* Transmit control */
-+	0x00E4, /* Physical address low */
-+	0x00E8, /* Physical address high */
-+	0x0144, /* Transmit FIFO Watermark and Store and Forward Control*/
-+	0x0190, /* Receive FIFO Section Full Threshold */
-+	0x01A0, /* Transmit FIFO Section Empty Threshold */
-+	0x01B0, /* Frame Truncation Length */
-+};
-+
-+/********************************************************************/
-+/*                   SYSFS INTERFACE				    */
-+/********************************************************************/
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+/*
-+ * pfe_eth_show_napi_stats
-+ */
-+static ssize_t pfe_eth_show_napi_stats(struct device *dev,
-+				       struct device_attribute *attr,
-+				       char *buf)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	ssize_t len = 0;
-+
-+	len += sprintf(buf + len, "sched:  %u\n",
-+			priv->napi_counters[NAPI_SCHED_COUNT]);
-+	len += sprintf(buf + len, "poll:   %u\n",
-+			priv->napi_counters[NAPI_POLL_COUNT]);
-+	len += sprintf(buf + len, "packet: %u\n",
-+			priv->napi_counters[NAPI_PACKET_COUNT]);
-+	len += sprintf(buf + len, "budget: %u\n",
-+			priv->napi_counters[NAPI_FULL_BUDGET_COUNT]);
-+	len += sprintf(buf + len, "desc:   %u\n",
-+			priv->napi_counters[NAPI_DESC_COUNT]);
-+
-+	return len;
-+}
-+
-+/*
-+ * pfe_eth_set_napi_stats
-+ */
-+static ssize_t pfe_eth_set_napi_stats(struct device *dev,
-+				      struct device_attribute *attr,
-+				      const char *buf, size_t count)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
-+
-+	memset(priv->napi_counters, 0, sizeof(priv->napi_counters));
-+
-+	return count;
-+}
-+#endif
-+#ifdef PFE_ETH_TX_STATS
-+/* pfe_eth_show_tx_stats
-+ *
-+ */
-+static ssize_t pfe_eth_show_tx_stats(struct device *dev,
-+				     struct device_attribute *attr,
-+				     char *buf)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	ssize_t len = 0;
-+	int i;
-+
-+	len += sprintf(buf + len, "TX queues stats:\n");
-+
-+	for (i = 0; i < emac_txq_cnt; i++) {
-+		struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
-+									i);
-+
-+		len += sprintf(buf + len, "\n");
-+		__netif_tx_lock_bh(tx_queue);
-+
-+		hif_tx_lock(&pfe->hif);
-+		len += sprintf(buf + len,
-+				"Queue %2d :  credits               = %10d\n"
-+				, i, hif_lib_tx_credit_avail(pfe, priv->id, i));
-+		len += sprintf(buf + len,
-+				 "            tx packets            = %10d\n"
-+				,  pfe->tmu_credit.tx_packets[priv->id][i]);
-+		hif_tx_unlock(&pfe->hif);
-+
-+		/* Don't output additionnal stats if queue never used */
-+		if (!pfe->tmu_credit.tx_packets[priv->id][i])
-+			goto skip;
-+
-+		len += sprintf(buf + len,
-+				 "            clean_fail            = %10d\n"
-+				, priv->clean_fail[i]);
-+		len += sprintf(buf + len,
-+				 "            stop_queue            = %10d\n"
-+				, priv->stop_queue_total[i]);
-+		len += sprintf(buf + len,
-+				 "            stop_queue_hif        = %10d\n"
-+				, priv->stop_queue_hif[i]);
-+		len += sprintf(buf + len,
-+				"            stop_queue_hif_client = %10d\n"
-+				, priv->stop_queue_hif_client[i]);
-+		len += sprintf(buf + len,
-+				 "            stop_queue_credit     = %10d\n"
-+				, priv->stop_queue_credit[i]);
-+skip:
-+		__netif_tx_unlock_bh(tx_queue);
-+	}
-+	return len;
-+}
-+
-+/* pfe_eth_set_tx_stats
-+ *
-+ */
-+static ssize_t pfe_eth_set_tx_stats(struct device *dev,
-+				    struct device_attribute *attr,
-+				    const char *buf, size_t count)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	int i;
-+
-+	for (i = 0; i < emac_txq_cnt; i++) {
-+		struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
-+									i);
-+
-+		__netif_tx_lock_bh(tx_queue);
-+		priv->clean_fail[i] = 0;
-+		priv->stop_queue_total[i] = 0;
-+		priv->stop_queue_hif[i] = 0;
-+		priv->stop_queue_hif_client[i] = 0;
-+		priv->stop_queue_credit[i] = 0;
-+		__netif_tx_unlock_bh(tx_queue);
-+	}
-+
-+	return count;
-+}
-+#endif
-+/* pfe_eth_show_txavail
-+ *
-+ */
-+static ssize_t pfe_eth_show_txavail(struct device *dev,
-+				    struct device_attribute *attr,
-+				    char *buf)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	ssize_t len = 0;
-+	int i;
-+
-+	for (i = 0; i < emac_txq_cnt; i++) {
-+		struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
-+									i);
-+
-+		__netif_tx_lock_bh(tx_queue);
-+
-+		len += sprintf(buf + len, "%d",
-+				hif_lib_tx_avail(&priv->client, i));
-+
-+		__netif_tx_unlock_bh(tx_queue);
-+
-+		if (i == (emac_txq_cnt - 1))
-+			len += sprintf(buf + len, "\n");
-+		else
-+			len += sprintf(buf + len, " ");
-+	}
-+
-+	return len;
-+}
-+
-+/* pfe_eth_show_default_priority
-+ *
-+ */
-+static ssize_t pfe_eth_show_default_priority(struct device *dev,
-+					     struct device_attribute *attr,
-+						char *buf)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	unsigned long flags;
-+	int rc;
-+
-+	spin_lock_irqsave(&priv->lock, flags);
-+	rc = sprintf(buf, "%d\n", priv->default_priority);
-+	spin_unlock_irqrestore(&priv->lock, flags);
-+
-+	return rc;
-+}
-+
-+/* pfe_eth_set_default_priority
-+ *
-+ */
-+
-+static ssize_t pfe_eth_set_default_priority(struct device *dev,
-+					    struct device_attribute *attr,
-+					    const char *buf, size_t count)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&priv->lock, flags);
-+	priv->default_priority = kstrtoul(buf, 0, 0);
-+	spin_unlock_irqrestore(&priv->lock, flags);
-+
-+	return count;
-+}
-+
-+static DEVICE_ATTR(txavail, 0444, pfe_eth_show_txavail, NULL);
-+static DEVICE_ATTR(default_priority, 0644, pfe_eth_show_default_priority,
-+			pfe_eth_set_default_priority);
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+static DEVICE_ATTR(napi_stats, 0644, pfe_eth_show_napi_stats,
-+			pfe_eth_set_napi_stats);
-+#endif
-+
-+#ifdef PFE_ETH_TX_STATS
-+static DEVICE_ATTR(tx_stats, 0644, pfe_eth_show_tx_stats,
-+			pfe_eth_set_tx_stats);
-+#endif
-+
-+/*
-+ * pfe_eth_sysfs_init
-+ *
-+ */
-+static int pfe_eth_sysfs_init(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	int err;
-+
-+	/* Initialize the default values */
-+
-+	/*
-+	 * By default, packets without conntrack will use this default high
-+	 * priority queue
-+	 */
-+	priv->default_priority = 15;
-+
-+	/* Create our sysfs files */
-+	err = device_create_file(&ndev->dev, &dev_attr_default_priority);
-+	if (err) {
-+		netdev_err(ndev,
-+			   "failed to create default_priority sysfs files\n");
-+		goto err_priority;
-+	}
-+
-+	err = device_create_file(&ndev->dev, &dev_attr_txavail);
-+	if (err) {
-+		netdev_err(ndev,
-+			   "failed to create default_priority sysfs files\n");
-+		goto err_txavail;
-+	}
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+	err = device_create_file(&ndev->dev, &dev_attr_napi_stats);
-+	if (err) {
-+		netdev_err(ndev, "failed to create napi stats sysfs files\n");
-+		goto err_napi;
-+	}
-+#endif
-+
-+#ifdef PFE_ETH_TX_STATS
-+	err = device_create_file(&ndev->dev, &dev_attr_tx_stats);
-+	if (err) {
-+		netdev_err(ndev, "failed to create tx stats sysfs files\n");
-+		goto err_tx;
-+	}
-+#endif
-+
-+	return 0;
-+
-+#ifdef PFE_ETH_TX_STATS
-+err_tx:
-+#endif
-+#ifdef PFE_ETH_NAPI_STATS
-+	device_remove_file(&ndev->dev, &dev_attr_napi_stats);
-+
-+err_napi:
-+#endif
-+	device_remove_file(&ndev->dev, &dev_attr_txavail);
-+
-+err_txavail:
-+	device_remove_file(&ndev->dev, &dev_attr_default_priority);
-+
-+err_priority:
-+	return -1;
-+}
-+
-+/* pfe_eth_sysfs_exit
-+ *
-+ */
-+void pfe_eth_sysfs_exit(struct net_device *ndev)
-+{
-+#ifdef PFE_ETH_TX_STATS
-+	device_remove_file(&ndev->dev, &dev_attr_tx_stats);
-+#endif
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+	device_remove_file(&ndev->dev, &dev_attr_napi_stats);
-+#endif
-+	device_remove_file(&ndev->dev, &dev_attr_txavail);
-+	device_remove_file(&ndev->dev, &dev_attr_default_priority);
-+}
-+
-+/*************************************************************************/
-+/*		ETHTOOL INTERCAE					 */
-+/*************************************************************************/
-+
-+/*MTIP GEMAC */
-+static const struct fec_stat {
-+	char name[ETH_GSTRING_LEN];
-+	u16 offset;
-+} fec_stats[] = {
-+	/* RMON TX */
-+	{ "tx_dropped", RMON_T_DROP },
-+	{ "tx_packets", RMON_T_PACKETS },
-+	{ "tx_broadcast", RMON_T_BC_PKT },
-+	{ "tx_multicast", RMON_T_MC_PKT },
-+	{ "tx_crc_errors", RMON_T_CRC_ALIGN },
-+	{ "tx_undersize", RMON_T_UNDERSIZE },
-+	{ "tx_oversize", RMON_T_OVERSIZE },
-+	{ "tx_fragment", RMON_T_FRAG },
-+	{ "tx_jabber", RMON_T_JAB },
-+	{ "tx_collision", RMON_T_COL },
-+	{ "tx_64byte", RMON_T_P64 },
-+	{ "tx_65to127byte", RMON_T_P65TO127 },
-+	{ "tx_128to255byte", RMON_T_P128TO255 },
-+	{ "tx_256to511byte", RMON_T_P256TO511 },
-+	{ "tx_512to1023byte", RMON_T_P512TO1023 },
-+	{ "tx_1024to2047byte", RMON_T_P1024TO2047 },
-+	{ "tx_GTE2048byte", RMON_T_P_GTE2048 },
-+	{ "tx_octets", RMON_T_OCTETS },
-+
-+	/* IEEE TX */
-+	{ "IEEE_tx_drop", IEEE_T_DROP },
-+	{ "IEEE_tx_frame_ok", IEEE_T_FRAME_OK },
-+	{ "IEEE_tx_1col", IEEE_T_1COL },
-+	{ "IEEE_tx_mcol", IEEE_T_MCOL },
-+	{ "IEEE_tx_def", IEEE_T_DEF },
-+	{ "IEEE_tx_lcol", IEEE_T_LCOL },
-+	{ "IEEE_tx_excol", IEEE_T_EXCOL },
-+	{ "IEEE_tx_macerr", IEEE_T_MACERR },
-+	{ "IEEE_tx_cserr", IEEE_T_CSERR },
-+	{ "IEEE_tx_sqe", IEEE_T_SQE },
-+	{ "IEEE_tx_fdxfc", IEEE_T_FDXFC },
-+	{ "IEEE_tx_octets_ok", IEEE_T_OCTETS_OK },
-+
-+	/* RMON RX */
-+	{ "rx_packets", RMON_R_PACKETS },
-+	{ "rx_broadcast", RMON_R_BC_PKT },
-+	{ "rx_multicast", RMON_R_MC_PKT },
-+	{ "rx_crc_errors", RMON_R_CRC_ALIGN },
-+	{ "rx_undersize", RMON_R_UNDERSIZE },
-+	{ "rx_oversize", RMON_R_OVERSIZE },
-+	{ "rx_fragment", RMON_R_FRAG },
-+	{ "rx_jabber", RMON_R_JAB },
-+	{ "rx_64byte", RMON_R_P64 },
-+	{ "rx_65to127byte", RMON_R_P65TO127 },
-+	{ "rx_128to255byte", RMON_R_P128TO255 },
-+	{ "rx_256to511byte", RMON_R_P256TO511 },
-+	{ "rx_512to1023byte", RMON_R_P512TO1023 },
-+	{ "rx_1024to2047byte", RMON_R_P1024TO2047 },
-+	{ "rx_GTE2048byte", RMON_R_P_GTE2048 },
-+	{ "rx_octets", RMON_R_OCTETS },
-+
-+	/* IEEE RX */
-+	{ "IEEE_rx_drop", IEEE_R_DROP },
-+	{ "IEEE_rx_frame_ok", IEEE_R_FRAME_OK },
-+	{ "IEEE_rx_crc", IEEE_R_CRC },
-+	{ "IEEE_rx_align", IEEE_R_ALIGN },
-+	{ "IEEE_rx_macerr", IEEE_R_MACERR },
-+	{ "IEEE_rx_fdxfc", IEEE_R_FDXFC },
-+	{ "IEEE_rx_octets_ok", IEEE_R_OCTETS_OK },
-+};
-+
-+static void pfe_eth_fill_stats(struct net_device *ndev, struct ethtool_stats
-+				*stats, u64 *data)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(fec_stats); i++)
-+		data[i] = readl(priv->EMAC_baseaddr + fec_stats[i].offset);
-+}
-+
-+static void pfe_eth_gstrings(struct net_device *netdev,
-+			     u32 stringset, u8 *data)
-+{
-+	int i;
-+
-+	switch (stringset) {
-+	case ETH_SS_STATS:
-+		for (i = 0; i < ARRAY_SIZE(fec_stats); i++)
-+			memcpy(data + i * ETH_GSTRING_LEN,
-+			       fec_stats[i].name, ETH_GSTRING_LEN);
-+		break;
-+	}
-+}
-+
-+static int pfe_eth_stats_count(struct net_device *ndev, int sset)
-+{
-+	switch (sset) {
-+	case ETH_SS_STATS:
-+		return ARRAY_SIZE(fec_stats);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
-+/*
-+ * pfe_eth_gemac_reglen - Return the length of the register structure.
-+ *
-+ */
-+static int pfe_eth_gemac_reglen(struct net_device *ndev)
-+{
-+	pr_info("%s()\n", __func__);
-+	return (sizeof(gemac_regs) / sizeof(u32));
-+}
-+
-+/*
-+ * pfe_eth_gemac_get_regs - Return the gemac register structure.
-+ *
-+ */
-+static void  pfe_eth_gemac_get_regs(struct net_device *ndev, struct ethtool_regs
-+					*regs, void *regbuf)
-+{
-+	int i;
-+
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	u32 *buf = (u32 *)regbuf;
-+
-+	pr_info("%s()\n", __func__);
-+	for (i = 0; i < sizeof(gemac_regs) / sizeof(u32); i++)
-+		buf[i] = readl(priv->EMAC_baseaddr + gemac_regs[i]);
-+}
-+
-+/*
-+ * pfe_eth_set_wol - Set the magic packet option, in WoL register.
-+ *
-+ */
-+static int pfe_eth_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	if (wol->wolopts & ~WAKE_MAGIC)
-+		return -EOPNOTSUPP;
-+
-+	/* for MTIP we store wol->wolopts */
-+	priv->wol = wol->wolopts;
-+
-+	device_set_wakeup_enable(&ndev->dev, wol->wolopts & WAKE_MAGIC);
-+
-+	return 0;
-+}
-+
-+/*
-+ *
-+ * pfe_eth_get_wol - Get the WoL options.
-+ *
-+ */
-+static void pfe_eth_get_wol(struct net_device *ndev, struct ethtool_wolinfo
-+				*wol)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	wol->supported = WAKE_MAGIC;
-+	wol->wolopts = 0;
-+
-+	if (priv->wol & WAKE_MAGIC)
-+		wol->wolopts = WAKE_MAGIC;
-+
-+	memset(&wol->sopass, 0, sizeof(wol->sopass));
-+}
-+
-+/*
-+ * pfe_eth_get_drvinfo -  Fills in the drvinfo structure with some basic info
-+ *
-+ */
-+static void pfe_eth_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo
-+				*drvinfo)
-+{
-+	strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver));
-+	strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version));
-+	strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
-+	strlcpy(drvinfo->bus_info, "N/A", sizeof(drvinfo->bus_info));
-+}
-+
-+/*
-+ * pfe_eth_set_settings - Used to send commands to PHY.
-+ *
-+ */
-+static int pfe_eth_set_settings(struct net_device *ndev,
-+				const struct ethtool_link_ksettings *cmd)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	struct phy_device *phydev = priv->phydev;
-+
-+	if (!phydev)
-+		return -ENODEV;
-+
-+	return phy_ethtool_ksettings_set(phydev, cmd);
-+}
-+
-+/*
-+ * pfe_eth_getsettings - Return the current settings in the ethtool_cmd
-+ * structure.
-+ *
-+ */
-+static int pfe_eth_get_settings(struct net_device *ndev,
-+				struct ethtool_link_ksettings *cmd)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	struct phy_device *phydev = priv->phydev;
-+
-+	if (!phydev)
-+		return -ENODEV;
-+
-+	return phy_ethtool_ksettings_get(phydev, cmd);
-+}
-+
-+/*
-+ * pfe_eth_get_msglevel - Gets the debug message mask.
-+ *
-+ */
-+static uint32_t pfe_eth_get_msglevel(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	return priv->msg_enable;
-+}
-+
-+/*
-+ * pfe_eth_set_msglevel - Sets the debug message mask.
-+ *
-+ */
-+static void pfe_eth_set_msglevel(struct net_device *ndev, uint32_t data)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	priv->msg_enable = data;
-+}
-+
-+#define HIF_RX_COAL_MAX_CLKS		(~(1 << 31))
-+#define HIF_RX_COAL_CLKS_PER_USEC	(pfe->ctrl.sys_clk / 1000)
-+#define HIF_RX_COAL_MAX_USECS		(HIF_RX_COAL_MAX_CLKS	/ \
-+						HIF_RX_COAL_CLKS_PER_USEC)
-+
-+/*
-+ * pfe_eth_set_coalesce - Sets rx interrupt coalescing timer.
-+ *
-+ */
-+static int pfe_eth_set_coalesce(struct net_device *ndev,
-+				struct ethtool_coalesce *ec)
-+{
-+	if (ec->rx_coalesce_usecs > HIF_RX_COAL_MAX_USECS)
-+		return -EINVAL;
-+
-+	if (!ec->rx_coalesce_usecs) {
-+		writel(0, HIF_INT_COAL);
-+		return 0;
-+	}
-+
-+	writel((ec->rx_coalesce_usecs * HIF_RX_COAL_CLKS_PER_USEC) |
-+			HIF_INT_COAL_ENABLE, HIF_INT_COAL);
-+
-+	return 0;
-+}
-+
-+/*
-+ * pfe_eth_get_coalesce - Gets rx interrupt coalescing timer value.
-+ *
-+ */
-+static int pfe_eth_get_coalesce(struct net_device *ndev,
-+				struct ethtool_coalesce *ec)
-+{
-+	int reg_val = readl(HIF_INT_COAL);
-+
-+	if (reg_val & HIF_INT_COAL_ENABLE)
-+		ec->rx_coalesce_usecs = (reg_val & HIF_RX_COAL_MAX_CLKS) /
-+						HIF_RX_COAL_CLKS_PER_USEC;
-+	else
-+		ec->rx_coalesce_usecs = 0;
-+
-+	return 0;
-+}
-+
-+/*
-+ * pfe_eth_set_pauseparam - Sets pause parameters
-+ *
-+ */
-+static int pfe_eth_set_pauseparam(struct net_device *ndev,
-+				  struct ethtool_pauseparam *epause)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	if (epause->tx_pause != epause->rx_pause) {
-+		netdev_info(ndev,
-+			    "hardware only support enable/disable both tx and rx\n");
-+		return -EINVAL;
-+	}
-+
-+	priv->pause_flag = 0;
-+	priv->pause_flag |= epause->rx_pause ? PFE_PAUSE_FLAG_ENABLE : 0;
-+	priv->pause_flag |= epause->autoneg ? PFE_PAUSE_FLAG_AUTONEG : 0;
-+
-+	if (epause->rx_pause || epause->autoneg) {
-+		gemac_enable_pause_rx(priv->EMAC_baseaddr);
-+		writel((readl(priv->GPI_baseaddr + GPI_TX_PAUSE_TIME) |
-+					EGPI_PAUSE_ENABLE),
-+				priv->GPI_baseaddr + GPI_TX_PAUSE_TIME);
-+		if (priv->phydev) {
-+			priv->phydev->supported |= ADVERTISED_Pause |
-+							ADVERTISED_Asym_Pause;
-+			priv->phydev->advertising |= ADVERTISED_Pause |
-+							ADVERTISED_Asym_Pause;
-+		}
-+	} else {
-+		gemac_disable_pause_rx(priv->EMAC_baseaddr);
-+		writel((readl(priv->GPI_baseaddr + GPI_TX_PAUSE_TIME) &
-+					~EGPI_PAUSE_ENABLE),
-+				priv->GPI_baseaddr + GPI_TX_PAUSE_TIME);
-+		if (priv->phydev) {
-+			priv->phydev->supported &= ~(ADVERTISED_Pause |
-+							ADVERTISED_Asym_Pause);
-+			priv->phydev->advertising &= ~(ADVERTISED_Pause |
-+							ADVERTISED_Asym_Pause);
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * pfe_eth_get_pauseparam - Gets pause parameters
-+ *
-+ */
-+static void pfe_eth_get_pauseparam(struct net_device *ndev,
-+				   struct ethtool_pauseparam *epause)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	epause->autoneg = (priv->pause_flag & PFE_PAUSE_FLAG_AUTONEG) != 0;
-+	epause->tx_pause = (priv->pause_flag & PFE_PAUSE_FLAG_ENABLE) != 0;
-+	epause->rx_pause = epause->tx_pause;
-+}
-+
-+/*
-+ * pfe_eth_get_hash
-+ */
-+#define PFE_HASH_BITS	6		/* #bits in hash */
-+#define CRC32_POLY	0xEDB88320
-+
-+static int pfe_eth_get_hash(u8 *addr)
-+{
-+	unsigned int i, bit, data, crc, hash;
-+
-+	/* calculate crc32 value of mac address */
-+	crc = 0xffffffff;
-+
-+	for (i = 0; i < 6; i++) {
-+		data = addr[i];
-+		for (bit = 0; bit < 8; bit++, data >>= 1) {
-+			crc = (crc >> 1) ^
-+				(((crc ^ data) & 1) ? CRC32_POLY : 0);
-+		}
-+	}
-+
-+	/*
-+	 * only upper 6 bits (PFE_HASH_BITS) are used
-+	 * which point to specific bit in the hash registers
-+	 */
-+	hash = (crc >> (32 - PFE_HASH_BITS)) & 0x3f;
-+
-+	return hash;
-+}
-+
-+const struct ethtool_ops pfe_ethtool_ops = {
-+	.get_drvinfo = pfe_eth_get_drvinfo,
-+	.get_regs_len = pfe_eth_gemac_reglen,
-+	.get_regs = pfe_eth_gemac_get_regs,
-+	.get_link = ethtool_op_get_link,
-+	.get_wol  = pfe_eth_get_wol,
-+	.set_wol  = pfe_eth_set_wol,
-+	.set_pauseparam = pfe_eth_set_pauseparam,
-+	.get_pauseparam = pfe_eth_get_pauseparam,
-+	.get_strings = pfe_eth_gstrings,
-+	.get_sset_count = pfe_eth_stats_count,
-+	.get_ethtool_stats = pfe_eth_fill_stats,
-+	.get_msglevel = pfe_eth_get_msglevel,
-+	.set_msglevel = pfe_eth_set_msglevel,
-+	.set_coalesce = pfe_eth_set_coalesce,
-+	.get_coalesce = pfe_eth_get_coalesce,
-+	.get_link_ksettings = pfe_eth_get_settings,
-+	.set_link_ksettings = pfe_eth_set_settings,
-+};
-+
-+/* pfe_eth_mdio_reset
-+ */
-+int pfe_eth_mdio_reset(struct mii_bus *bus)
-+{
-+	struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv;
-+	u32 phy_speed;
-+
-+	netif_info(priv, hw, priv->ndev, "%s\n", __func__);
-+
-+	mutex_lock(&bus->mdio_lock);
-+
-+	/*
-+	 * Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed)
-+	 *
-+	 * The formula for FEC MDC is 'ref_freq / (MII_SPEED x 2)' while
-+	 * for ENET-MAC is 'ref_freq / ((MII_SPEED + 1) x 2)'.
-+	 */
-+	phy_speed = (DIV_ROUND_UP((pfe->ctrl.sys_clk * 1000), 4000000)
-+		     << EMAC_MII_SPEED_SHIFT);
-+	phy_speed |= EMAC_HOLDTIME(0x5);
-+	__raw_writel(phy_speed, priv->PHY_baseaddr + EMAC_MII_CTRL_REG);
-+
-+	mutex_unlock(&bus->mdio_lock);
-+
-+	return 0;
-+}
-+
-+/* pfe_eth_gemac_phy_timeout
-+ *
-+ */
-+static int pfe_eth_gemac_phy_timeout(struct pfe_eth_priv_s *priv, int timeout)
-+{
-+	while (!(__raw_readl(priv->PHY_baseaddr + EMAC_IEVENT_REG) &
-+			EMAC_IEVENT_MII)) {
-+		if (timeout-- <= 0)
-+			return -1;
-+		usleep_range(10, 20);
-+	}
-+	__raw_writel(EMAC_IEVENT_MII, priv->PHY_baseaddr + EMAC_IEVENT_REG);
-+	return 0;
-+}
-+
-+static int pfe_eth_mdio_mux(u8 muxval)
-+{
-+	struct i2c_adapter *a;
-+	struct i2c_msg msg;
-+	unsigned char buf[2];
-+	int ret;
-+
-+	a = i2c_get_adapter(0);
-+	if (!a)
-+		return -ENODEV;
-+
-+	/* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
-+	buf[0] = 0x54; /* reg number */
-+	buf[1] = (muxval << 6) | 0x3; /* data */
-+	msg.addr = 0x66;
-+	msg.buf = buf;
-+	msg.len = 2;
-+	msg.flags = 0;
-+	ret = i2c_transfer(a, &msg, 1);
-+	i2c_put_adapter(a);
-+	if (ret != 1)
-+		return -ENODEV;
-+	return 0;
-+}
-+
-+static int pfe_eth_mdio_write_addr(struct mii_bus *bus, int mii_id,
-+				   int dev_addr, int regnum)
-+{
-+	struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv;
-+
-+	__raw_writel(EMAC_MII_DATA_PA(mii_id) |
-+		     EMAC_MII_DATA_RA(dev_addr) |
-+		     EMAC_MII_DATA_TA | EMAC_MII_DATA(regnum),
-+		     priv->PHY_baseaddr + EMAC_MII_DATA_REG);
-+
-+	if (pfe_eth_gemac_phy_timeout(priv, EMAC_MDIO_TIMEOUT)) {
-+		netdev_err(priv->ndev, "%s: phy MDIO address write timeout\n",
-+			   __func__);
-+		return -1;
-+	}
-+
-+	return 0;
-+}
-+
-+static int pfe_eth_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
-+			      u16 value)
-+{
-+	struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv;
-+
-+	/*To access external PHYs on QDS board mux needs to be configured*/
-+	if ((mii_id) && (pfe->mdio_muxval[mii_id]))
-+		pfe_eth_mdio_mux(pfe->mdio_muxval[mii_id]);
-+
-+	if (regnum & MII_ADDR_C45) {
-+		pfe_eth_mdio_write_addr(bus, mii_id, (regnum >> 16) & 0x1f,
-+					regnum & 0xffff);
-+		__raw_writel(EMAC_MII_DATA_OP_CL45_WR |
-+			     EMAC_MII_DATA_PA(mii_id) |
-+			     EMAC_MII_DATA_RA((regnum >> 16) & 0x1f) |
-+			     EMAC_MII_DATA_TA | EMAC_MII_DATA(value),
-+			     priv->PHY_baseaddr + EMAC_MII_DATA_REG);
-+	} else {
-+		/* start a write op */
-+		__raw_writel(EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_WR |
-+			     EMAC_MII_DATA_PA(mii_id) |
-+			     EMAC_MII_DATA_RA(regnum) |
-+			     EMAC_MII_DATA_TA | EMAC_MII_DATA(value),
-+			     priv->PHY_baseaddr + EMAC_MII_DATA_REG);
-+	}
-+
-+	if (pfe_eth_gemac_phy_timeout(priv, EMAC_MDIO_TIMEOUT)) {
-+		netdev_err(priv->ndev, "%s: phy MDIO write timeout\n",
-+			   __func__);
-+		return -1;
-+	}
-+	netif_info(priv, hw, priv->ndev, "%s: phy %x reg %x val %x\n", __func__,
-+		   mii_id, regnum, value);
-+
-+	return 0;
-+}
-+
-+static int pfe_eth_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
-+{
-+	struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv;
-+	u16 value = 0;
-+
-+	/*To access external PHYs on QDS board mux needs to be configured*/
-+	if ((mii_id) && (pfe->mdio_muxval[mii_id]))
-+		pfe_eth_mdio_mux(pfe->mdio_muxval[mii_id]);
-+
-+	if (regnum & MII_ADDR_C45) {
-+		pfe_eth_mdio_write_addr(bus, mii_id, (regnum >> 16) & 0x1f,
-+					regnum & 0xffff);
-+		__raw_writel(EMAC_MII_DATA_OP_CL45_RD |
-+			     EMAC_MII_DATA_PA(mii_id) |
-+			     EMAC_MII_DATA_RA((regnum >> 16) & 0x1f) |
-+			     EMAC_MII_DATA_TA,
-+			     priv->PHY_baseaddr + EMAC_MII_DATA_REG);
-+	} else {
-+		/* start a read op */
-+		__raw_writel(EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_RD |
-+			     EMAC_MII_DATA_PA(mii_id) |
-+			     EMAC_MII_DATA_RA(regnum) |
-+			     EMAC_MII_DATA_TA, priv->PHY_baseaddr +
-+			     EMAC_MII_DATA_REG);
-+	}
-+
-+	if (pfe_eth_gemac_phy_timeout(priv, EMAC_MDIO_TIMEOUT)) {
-+		netdev_err(priv->ndev, "%s: phy MDIO read timeout\n", __func__);
-+		return -1;
-+	}
-+
-+	value = EMAC_MII_DATA(__raw_readl(priv->PHY_baseaddr +
-+						EMAC_MII_DATA_REG));
-+	netif_info(priv, hw, priv->ndev, "%s: phy %x reg %x val %x\n", __func__,
-+		   mii_id, regnum, value);
-+	return value;
-+}
-+
-+static int pfe_eth_mdio_init(struct pfe_eth_priv_s *priv,
-+			     struct ls1012a_mdio_platform_data *minfo)
-+{
-+	struct mii_bus *bus;
-+	int rc;
-+
-+	netif_info(priv, drv, priv->ndev, "%s\n", __func__);
-+	pr_info("%s\n", __func__);
-+
-+	bus = mdiobus_alloc();
-+	if (!bus) {
-+		netdev_err(priv->ndev, "mdiobus_alloc() failed\n");
-+		rc = -ENOMEM;
-+		goto err0;
-+	}
-+
-+	bus->name = "ls1012a MDIO Bus";
-+	bus->read = &pfe_eth_mdio_read;
-+	bus->write = &pfe_eth_mdio_write;
-+	bus->reset = &pfe_eth_mdio_reset;
-+	snprintf(bus->id, MII_BUS_ID_SIZE, "ls1012a-%x", priv->id);
-+	bus->priv = priv;
-+
-+	bus->phy_mask = minfo->phy_mask;
-+	priv->mdc_div = minfo->mdc_div;
-+
-+	if (!priv->mdc_div)
-+		priv->mdc_div = 64;
-+
-+	bus->irq[0] = minfo->irq[0];
-+
-+	bus->parent = priv->pfe->dev;
-+
-+	netif_info(priv, drv, priv->ndev, "%s: mdc_div: %d, phy_mask: %x\n",
-+		   __func__, priv->mdc_div, bus->phy_mask);
-+	rc = mdiobus_register(bus);
-+	if (rc) {
-+		netdev_err(priv->ndev, "mdiobus_register(%s) failed\n",
-+			   bus->name);
-+		goto err1;
-+	}
-+
-+	priv->mii_bus = bus;
-+	pfe_eth_mdio_reset(bus);
-+
-+	return 0;
-+
-+err1:
-+	mdiobus_free(bus);
-+err0:
-+	return rc;
-+}
-+
-+/* pfe_eth_mdio_exit
-+ */
-+static void pfe_eth_mdio_exit(struct mii_bus *bus)
-+{
-+	if (!bus)
-+		return;
-+
-+	netif_info((struct pfe_eth_priv_s *)bus->priv, drv, ((struct
-+			pfe_eth_priv_s *)(bus->priv))->ndev, "%s\n", __func__);
-+
-+	mdiobus_unregister(bus);
-+	mdiobus_free(bus);
-+}
-+
-+/* pfe_get_phydev_speed
-+ */
-+static int pfe_get_phydev_speed(struct phy_device *phydev)
-+{
-+	switch (phydev->speed) {
-+	case 10:
-+			return SPEED_10M;
-+	case 100:
-+			return SPEED_100M;
-+	case 1000:
-+	default:
-+			return SPEED_1000M;
-+	}
-+}
-+
-+/* pfe_set_rgmii_speed
-+ */
-+#define RGMIIPCR	0x434
-+/* RGMIIPCR bit definitions*/
-+#define SCFG_RGMIIPCR_EN_AUTO           (0x00000008)
-+#define SCFG_RGMIIPCR_SETSP_1000M       (0x00000004)
-+#define SCFG_RGMIIPCR_SETSP_100M        (0x00000000)
-+#define SCFG_RGMIIPCR_SETSP_10M         (0x00000002)
-+#define SCFG_RGMIIPCR_SETFD             (0x00000001)
-+
-+static void pfe_set_rgmii_speed(struct phy_device *phydev)
-+{
-+	u32 rgmii_pcr;
-+
-+	regmap_read(pfe->scfg, RGMIIPCR, &rgmii_pcr);
-+	rgmii_pcr  &= ~(SCFG_RGMIIPCR_SETSP_1000M | SCFG_RGMIIPCR_SETSP_10M);
-+
-+	switch (phydev->speed) {
-+	case 10:
-+			rgmii_pcr |= SCFG_RGMIIPCR_SETSP_10M;
-+			break;
-+	case 1000:
-+			rgmii_pcr |= SCFG_RGMIIPCR_SETSP_1000M;
-+			break;
-+	case 100:
-+	default:
-+			/* Default is 100M */
-+			break;
-+	}
-+	regmap_write(pfe->scfg, RGMIIPCR, rgmii_pcr);
-+}
-+
-+/* pfe_get_phydev_duplex
-+ */
-+static int pfe_get_phydev_duplex(struct phy_device *phydev)
-+{
-+	/*return (phydev->duplex == DUPLEX_HALF) ? DUP_HALF:DUP_FULL ; */
-+	return DUPLEX_FULL;
-+}
-+
-+/* pfe_eth_adjust_link
-+ */
-+static void pfe_eth_adjust_link(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	unsigned long flags;
-+	struct phy_device *phydev = priv->phydev;
-+	int new_state = 0;
-+
-+	netif_info(priv, drv, ndev, "%s\n", __func__);
-+
-+	spin_lock_irqsave(&priv->lock, flags);
-+
-+	if (phydev->link) {
-+		/*
-+		 * Now we make sure that we can be in full duplex mode.
-+		 * If not, we operate in half-duplex mode.
-+		 */
-+		if (phydev->duplex != priv->oldduplex) {
-+			new_state = 1;
-+			gemac_set_duplex(priv->EMAC_baseaddr,
-+					 pfe_get_phydev_duplex(phydev));
-+			priv->oldduplex = phydev->duplex;
-+		}
-+
-+		if (phydev->speed != priv->oldspeed) {
-+			new_state = 1;
-+			gemac_set_speed(priv->EMAC_baseaddr,
-+					pfe_get_phydev_speed(phydev));
-+			if (priv->einfo->mii_config == PHY_INTERFACE_MODE_RGMII)
-+				pfe_set_rgmii_speed(phydev);
-+			priv->oldspeed = phydev->speed;
-+		}
-+
-+		if (!priv->oldlink) {
-+			new_state = 1;
-+			priv->oldlink = 1;
-+		}
-+
-+	} else if (priv->oldlink) {
-+		new_state = 1;
-+		priv->oldlink = 0;
-+		priv->oldspeed = 0;
-+		priv->oldduplex = -1;
-+	}
-+
-+	if (new_state && netif_msg_link(priv))
-+		phy_print_status(phydev);
-+
-+	spin_unlock_irqrestore(&priv->lock, flags);
-+}
-+
-+/* pfe_phy_exit
-+ */
-+static void pfe_phy_exit(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	netif_info(priv, drv, ndev, "%s\n", __func__);
-+
-+	phy_disconnect(priv->phydev);
-+	priv->phydev = NULL;
-+}
-+
-+/* pfe_eth_stop
-+ */
-+static void pfe_eth_stop(struct net_device *ndev, int wake)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	netif_info(priv, drv, ndev, "%s\n", __func__);
-+
-+	if (wake) {
-+		gemac_tx_disable(priv->EMAC_baseaddr);
-+	} else {
-+		gemac_disable(priv->EMAC_baseaddr);
-+		gpi_disable(priv->GPI_baseaddr);
-+
-+		if (priv->phydev)
-+			phy_stop(priv->phydev);
-+	}
-+}
-+
-+/* pfe_eth_start
-+ */
-+static int pfe_eth_start(struct pfe_eth_priv_s *priv)
-+{
-+	netif_info(priv, drv, priv->ndev, "%s\n", __func__);
-+
-+	if (priv->phydev)
-+		phy_start(priv->phydev);
-+
-+	gpi_enable(priv->GPI_baseaddr);
-+	gemac_enable(priv->EMAC_baseaddr);
-+
-+	return 0;
-+}
-+
-+/*
-+ * Configure on chip serdes through mdio
-+ */
-+static void ls1012a_configure_serdes(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = pfe->eth.eth_priv[0];
-+	int sgmii_2500 = 0;
-+	struct mii_bus *bus = priv->mii_bus;
-+
-+	if (priv->einfo->mii_config == PHY_INTERFACE_MODE_SGMII_2500)
-+		sgmii_2500 = 1;
-+
-+	netif_info(priv, drv, ndev, "%s\n", __func__);
-+	/* PCS configuration done with corresponding GEMAC */
-+
-+	pfe_eth_mdio_read(bus, 0, 0);
-+	pfe_eth_mdio_read(bus, 0, 1);
-+
-+       /*These settings taken from validtion team */
-+	pfe_eth_mdio_write(bus, 0, 0x0, 0x8000);
-+	if (sgmii_2500) {
-+		pfe_eth_mdio_write(bus, 0, 0x14, 0x9);
-+		pfe_eth_mdio_write(bus, 0, 0x4, 0x4001);
-+		pfe_eth_mdio_write(bus, 0, 0x12, 0xa120);
-+		pfe_eth_mdio_write(bus, 0, 0x13, 0x7);
-+	} else {
-+		pfe_eth_mdio_write(bus, 0, 0x14, 0xb);
-+		pfe_eth_mdio_write(bus, 0, 0x4, 0x1a1);
-+		pfe_eth_mdio_write(bus, 0, 0x12, 0x400);
-+		pfe_eth_mdio_write(bus, 0, 0x13, 0x0);
-+	}
-+
-+	pfe_eth_mdio_write(bus, 0, 0x0, 0x1140);
-+}
-+
-+/*
-+ * pfe_phy_init
-+ *
-+ */
-+static int pfe_phy_init(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	struct phy_device *phydev;
-+	char phy_id[MII_BUS_ID_SIZE + 3];
-+	char bus_id[MII_BUS_ID_SIZE];
-+	phy_interface_t interface;
-+
-+	priv->oldlink = 0;
-+	priv->oldspeed = 0;
-+	priv->oldduplex = -1;
-+
-+	snprintf(bus_id, MII_BUS_ID_SIZE, "ls1012a-%d", 0);
-+	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
-+		 priv->einfo->phy_id);
-+
-+	netif_info(priv, drv, ndev, "%s: %s\n", __func__, phy_id);
-+	interface = priv->einfo->mii_config;
-+	if ((interface == PHY_INTERFACE_MODE_SGMII) ||
-+	    (interface == PHY_INTERFACE_MODE_SGMII_2500)) {
-+		/*Configure SGMII PCS */
-+		if (pfe->scfg) {
-+			/*Config MDIO from serdes */
-+			regmap_write(pfe->scfg, 0x484, 0x00000000);
-+		}
-+		ls1012a_configure_serdes(ndev);
-+	}
-+
-+	if (pfe->scfg) {
-+		/*Config MDIO from PAD */
-+		regmap_write(pfe->scfg, 0x484, 0x80000000);
-+	}
-+
-+	priv->oldlink = 0;
-+	priv->oldspeed = 0;
-+	priv->oldduplex = -1;
-+	pr_info("%s interface %x\n", __func__, interface);
-+	phydev = phy_connect(ndev, phy_id, &pfe_eth_adjust_link, interface);
-+
-+	if (IS_ERR(phydev)) {
-+		netdev_err(ndev, "phy_connect() failed\n");
-+		return PTR_ERR(phydev);
-+	}
-+
-+	priv->phydev = phydev;
-+	phydev->irq = PHY_POLL;
-+
-+	return 0;
-+}
-+
-+/* pfe_gemac_init
-+ */
-+static int pfe_gemac_init(struct pfe_eth_priv_s *priv)
-+{
-+	struct gemac_cfg cfg;
-+
-+	netif_info(priv, ifup, priv->ndev, "%s\n", __func__);
-+
-+	cfg.speed = SPEED_1000M;
-+	cfg.duplex = DUPLEX_FULL;
-+
-+	gemac_set_config(priv->EMAC_baseaddr, &cfg);
-+	gemac_allow_broadcast(priv->EMAC_baseaddr);
-+	gemac_enable_1536_rx(priv->EMAC_baseaddr);
-+	gemac_enable_rx_jmb(priv->EMAC_baseaddr);
-+	gemac_enable_stacked_vlan(priv->EMAC_baseaddr);
-+	gemac_enable_pause_rx(priv->EMAC_baseaddr);
-+	gemac_set_bus_width(priv->EMAC_baseaddr, 64);
-+
-+	/*GEM will perform checksum verifications*/
-+	if (priv->ndev->features & NETIF_F_RXCSUM)
-+		gemac_enable_rx_checksum_offload(priv->EMAC_baseaddr);
-+	else
-+		gemac_disable_rx_checksum_offload(priv->EMAC_baseaddr);
-+
-+	return 0;
-+}
-+
-+/* pfe_eth_event_handler
-+ */
-+static int pfe_eth_event_handler(void *data, int event, int qno)
-+{
-+	struct pfe_eth_priv_s *priv = data;
-+
-+	switch (event) {
-+	case EVENT_RX_PKT_IND:
-+
-+		if (qno == 0) {
-+			if (napi_schedule_prep(&priv->high_napi)) {
-+				netif_info(priv, intr, priv->ndev,
-+					   "%s: schedule high prio poll\n"
-+					   , __func__);
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+				priv->napi_counters[NAPI_SCHED_COUNT]++;
-+#endif
-+
-+				__napi_schedule(&priv->high_napi);
-+			}
-+		} else if (qno == 1) {
-+			if (napi_schedule_prep(&priv->low_napi)) {
-+				netif_info(priv, intr, priv->ndev,
-+					   "%s: schedule low prio poll\n"
-+					   , __func__);
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+				priv->napi_counters[NAPI_SCHED_COUNT]++;
-+#endif
-+				__napi_schedule(&priv->low_napi);
-+			}
-+		} else if (qno == 2) {
-+			if (napi_schedule_prep(&priv->lro_napi)) {
-+				netif_info(priv, intr, priv->ndev,
-+					   "%s: schedule lro prio poll\n"
-+					   , __func__);
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+				priv->napi_counters[NAPI_SCHED_COUNT]++;
-+#endif
-+				__napi_schedule(&priv->lro_napi);
-+			}
-+		}
-+
-+		break;
-+
-+	case EVENT_TXDONE_IND:
-+		pfe_eth_flush_tx(priv);
-+		hif_lib_event_handler_start(&priv->client, EVENT_TXDONE_IND, 0);
-+		break;
-+	case EVENT_HIGH_RX_WM:
-+	default:
-+		break;
-+	}
-+
-+	return 0;
-+}
-+
-+/* pfe_eth_open
-+ */
-+static int pfe_eth_open(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	struct hif_client_s *client;
-+	int rc;
-+
-+	netif_info(priv, ifup, ndev, "%s\n", __func__);
-+
-+	/* Register client driver with HIF */
-+	client = &priv->client;
-+	memset(client, 0, sizeof(*client));
-+	client->id = PFE_CL_GEM0 + priv->id;
-+	client->tx_qn = emac_txq_cnt;
-+	client->rx_qn = EMAC_RXQ_CNT;
-+	client->priv = priv;
-+	client->pfe = priv->pfe;
-+	client->event_handler = pfe_eth_event_handler;
-+
-+	client->tx_qsize = EMAC_TXQ_DEPTH;
-+	client->rx_qsize = EMAC_RXQ_DEPTH;
-+
-+	rc = hif_lib_client_register(client);
-+	if (rc) {
-+		netdev_err(ndev, "%s: hif_lib_client_register(%d) failed\n",
-+			   __func__, client->id);
-+		goto err0;
-+	}
-+
-+	netif_info(priv, drv, ndev, "%s: registered client: %p\n", __func__,
-+		   client);
-+
-+	pfe_gemac_init(priv);
-+
-+	if (!is_valid_ether_addr(ndev->dev_addr)) {
-+		netdev_err(ndev, "%s: invalid MAC address\n", __func__);
-+		rc = -EADDRNOTAVAIL;
-+		goto err1;
-+	}
-+
-+	gemac_set_laddrN(priv->EMAC_baseaddr,
-+			 (struct pfe_mac_addr *)ndev->dev_addr, 1);
-+
-+	napi_enable(&priv->high_napi);
-+	napi_enable(&priv->low_napi);
-+	napi_enable(&priv->lro_napi);
-+
-+	rc = pfe_eth_start(priv);
-+
-+	netif_tx_wake_all_queues(ndev);
-+
-+	return rc;
-+
-+err1:
-+	hif_lib_client_unregister(&priv->client);
-+
-+err0:
-+	return rc;
-+}
-+
-+/*
-+ *  pfe_eth_shutdown
-+ */
-+int pfe_eth_shutdown(struct net_device *ndev, int wake)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	int i, qstatus;
-+	unsigned long next_poll = jiffies + 1, end = jiffies +
-+				(TX_POLL_TIMEOUT_MS * HZ) / 1000;
-+	int tx_pkts, prv_tx_pkts;
-+
-+	netif_info(priv, ifdown, ndev, "%s\n", __func__);
-+
-+	for (i = 0; i < emac_txq_cnt; i++)
-+		hrtimer_cancel(&priv->fast_tx_timeout[i].timer);
-+
-+	netif_tx_stop_all_queues(ndev);
-+
-+	do {
-+		tx_pkts = 0;
-+		pfe_eth_flush_tx(priv);
-+
-+		for (i = 0; i < emac_txq_cnt; i++)
-+			tx_pkts += hif_lib_tx_pending(&priv->client, i);
-+
-+		if (tx_pkts) {
-+			/*Don't wait forever, break if we cross max timeout */
-+			if (time_after(jiffies, end)) {
-+				pr_err(
-+					"(%s)Tx is not complete after %dmsec\n",
-+					ndev->name, TX_POLL_TIMEOUT_MS);
-+				break;
-+			}
-+
-+			pr_info("%s : (%s) Waiting for tx packets to free. Pending tx pkts = %d.\n"
-+				, __func__, ndev->name, tx_pkts);
-+			if (need_resched())
-+				schedule();
-+		}
-+
-+	} while (tx_pkts);
-+
-+	end = jiffies + (TX_POLL_TIMEOUT_MS * HZ) / 1000;
-+
-+	prv_tx_pkts = tmu_pkts_processed(priv->id);
-+	/*
-+	 * Wait till TMU transmits all pending packets
-+	 * poll tmu_qstatus and pkts processed by TMU for every 10ms
-+	 * Consider TMU is busy, If we see TMU qeueu pending or any packets
-+	 * processed by TMU
-+	 */
-+	while (1) {
-+		if (time_after(jiffies, next_poll)) {
-+			tx_pkts = tmu_pkts_processed(priv->id);
-+			qstatus = tmu_qstatus(priv->id) & 0x7ffff;
-+
-+			if (!qstatus && (tx_pkts == prv_tx_pkts))
-+				break;
-+			/* Don't wait forever, break if we cross max
-+			 * timeout(TX_POLL_TIMEOUT_MS)
-+			 */
-+			if (time_after(jiffies, end)) {
-+				pr_err("TMU%d is busy after %dmsec\n",
-+				       priv->id, TX_POLL_TIMEOUT_MS);
-+				break;
-+			}
-+			prv_tx_pkts = tx_pkts;
-+			next_poll++;
-+		}
-+		if (need_resched())
-+			schedule();
-+	}
-+	/* Wait for some more time to complete transmitting packet if any */
-+	next_poll = jiffies + 1;
-+	while (1) {
-+		if (time_after(jiffies, next_poll))
-+			break;
-+		if (need_resched())
-+			schedule();
-+	}
-+
-+	pfe_eth_stop(ndev, wake);
-+
-+	napi_disable(&priv->lro_napi);
-+	napi_disable(&priv->low_napi);
-+	napi_disable(&priv->high_napi);
-+
-+	hif_lib_client_unregister(&priv->client);
-+
-+	return 0;
-+}
-+
-+/* pfe_eth_close
-+ *
-+ */
-+static int pfe_eth_close(struct net_device *ndev)
-+{
-+	pfe_eth_shutdown(ndev, 0);
-+
-+	return 0;
-+}
-+
-+/* pfe_eth_suspend
-+ *
-+ * return value : 1 if netdevice is configured to wakeup system
-+ *                0 otherwise
-+ */
-+int pfe_eth_suspend(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	int retval = 0;
-+
-+	if (priv->wol) {
-+		gemac_set_wol(priv->EMAC_baseaddr, priv->wol);
-+		retval = 1;
-+	}
-+	pfe_eth_shutdown(ndev, priv->wol);
-+
-+	return retval;
-+}
-+
-+/* pfe_eth_resume
-+ *
-+ */
-+int pfe_eth_resume(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	if (priv->wol)
-+		gemac_set_wol(priv->EMAC_baseaddr, 0);
-+	gemac_tx_enable(priv->EMAC_baseaddr);
-+
-+	return pfe_eth_open(ndev);
-+}
-+
-+/* pfe_eth_get_queuenum
-+ */
-+static int pfe_eth_get_queuenum(struct pfe_eth_priv_s *priv, struct sk_buff
-+					*skb)
-+{
-+	int queuenum = 0;
-+	unsigned long flags;
-+
-+	/* Get the Fast Path queue number */
-+	/*
-+	 * Use conntrack mark (if conntrack exists), then packet mark (if any),
-+	 * then fallback to default
-+	 */
-+#if defined(CONFIG_IP_NF_CONNTRACK_MARK) || defined(CONFIG_NF_CONNTRACK_MARK)
-+	if (skb->_nfct) {
-+		enum ip_conntrack_info cinfo;
-+		struct nf_conn *ct;
-+
-+		ct = nf_ct_get(skb, &cinfo);
-+
-+		if (ct) {
-+			u32 connmark;
-+
-+			connmark = ct->mark;
-+
-+			if ((connmark & 0x80000000) && priv->id != 0)
-+				connmark >>= 16;
-+
-+			queuenum = connmark & EMAC_QUEUENUM_MASK;
-+		}
-+	} else  {/* continued after #endif ... */
-+#endif
-+		if (skb->mark) {
-+			queuenum = skb->mark & EMAC_QUEUENUM_MASK;
-+		} else {
-+			spin_lock_irqsave(&priv->lock, flags);
-+			queuenum = priv->default_priority & EMAC_QUEUENUM_MASK;
-+			spin_unlock_irqrestore(&priv->lock, flags);
-+		}
-+#if defined(CONFIG_IP_NF_CONNTRACK_MARK) || defined(CONFIG_NF_CONNTRACK_MARK)
-+	}
-+#endif
-+	return queuenum;
-+}
-+
-+/* pfe_eth_might_stop_tx
-+ *
-+ */
-+static int pfe_eth_might_stop_tx(struct pfe_eth_priv_s *priv, int queuenum,
-+				 struct netdev_queue *tx_queue,
-+				 unsigned int n_desc,
-+				 unsigned int n_segs)
-+{
-+	ktime_t kt;
-+
-+	if (unlikely((__hif_tx_avail(&pfe->hif) < n_desc) ||
-+		     (hif_lib_tx_avail(&priv->client, queuenum) < n_desc) ||
-+	(hif_lib_tx_credit_avail(pfe, priv->id, queuenum) < n_segs))) {
-+#ifdef PFE_ETH_TX_STATS
-+		if (__hif_tx_avail(&pfe->hif) < n_desc) {
-+			priv->stop_queue_hif[queuenum]++;
-+		} else if (hif_lib_tx_avail(&priv->client, queuenum) < n_desc) {
-+			priv->stop_queue_hif_client[queuenum]++;
-+		} else if (hif_lib_tx_credit_avail(pfe, priv->id, queuenum) <
-+			n_segs) {
-+			priv->stop_queue_credit[queuenum]++;
-+		}
-+		priv->stop_queue_total[queuenum]++;
-+#endif
-+		netif_tx_stop_queue(tx_queue);
-+
-+		kt = ktime_set(0, LS1012A_TX_FAST_RECOVERY_TIMEOUT_MS *
-+				NSEC_PER_MSEC);
-+		hrtimer_start(&priv->fast_tx_timeout[queuenum].timer, kt,
-+			      HRTIMER_MODE_REL);
-+		return -1;
-+	} else {
-+		return 0;
-+	}
-+}
-+
-+#define SA_MAX_OP 2
-+/* pfe_hif_send_packet
-+ *
-+ * At this level if TX fails we drop the packet
-+ */
-+static void pfe_hif_send_packet(struct sk_buff *skb, struct  pfe_eth_priv_s
-+					*priv, int queuenum)
-+{
-+	struct skb_shared_info *sh = skb_shinfo(skb);
-+	unsigned int nr_frags;
-+	u32 ctrl = 0;
-+
-+	netif_info(priv, tx_queued, priv->ndev, "%s\n", __func__);
-+
-+	if (skb_is_gso(skb)) {
-+		priv->stats.tx_dropped++;
-+		return;
-+	}
-+
-+	if (skb->ip_summed == CHECKSUM_PARTIAL)
-+		ctrl = HIF_CTRL_TX_CHECKSUM;
-+
-+	nr_frags = sh->nr_frags;
-+
-+	if (nr_frags) {
-+		skb_frag_t *f;
-+		int i;
-+
-+		__hif_lib_xmit_pkt(&priv->client, queuenum, skb->data,
-+				   skb_headlen(skb), ctrl, HIF_FIRST_BUFFER,
-+				   skb);
-+
-+		for (i = 0; i < nr_frags - 1; i++) {
-+			f = &sh->frags[i];
-+			__hif_lib_xmit_pkt(&priv->client, queuenum,
-+					   skb_frag_address(f),
-+					   skb_frag_size(f),
-+					   0x0, 0x0, skb);
-+		}
-+
-+		f = &sh->frags[i];
-+
-+		__hif_lib_xmit_pkt(&priv->client, queuenum,
-+				   skb_frag_address(f), skb_frag_size(f),
-+				   0x0, HIF_LAST_BUFFER | HIF_DATA_VALID,
-+				   skb);
-+
-+		netif_info(priv, tx_queued, priv->ndev,
-+			   "%s: pkt sent successfully skb:%p nr_frags:%d len:%d\n",
-+			   __func__, skb, nr_frags, skb->len);
-+	} else {
-+		__hif_lib_xmit_pkt(&priv->client, queuenum, skb->data,
-+				   skb->len, ctrl, HIF_FIRST_BUFFER |
-+				   HIF_LAST_BUFFER | HIF_DATA_VALID,
-+				   skb);
-+		netif_info(priv, tx_queued, priv->ndev,
-+			   "%s: pkt sent successfully skb:%p len:%d\n",
-+			   __func__, skb, skb->len);
-+	}
-+	hif_tx_dma_start();
-+	priv->stats.tx_packets++;
-+	priv->stats.tx_bytes += skb->len;
-+	hif_lib_tx_credit_use(pfe, priv->id, queuenum, 1);
-+}
-+
-+/* pfe_eth_flush_txQ
-+ */
-+static void pfe_eth_flush_txQ(struct pfe_eth_priv_s *priv, int tx_q_num, int
-+				from_tx, int n_desc)
-+{
-+	struct sk_buff *skb;
-+	struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
-+								tx_q_num);
-+	unsigned int flags;
-+
-+	netif_info(priv, tx_done, priv->ndev, "%s\n", __func__);
-+
-+	if (!from_tx)
-+		__netif_tx_lock_bh(tx_queue);
-+
-+	/* Clean HIF and client queue */
-+	while ((skb = hif_lib_tx_get_next_complete(&priv->client,
-+						   tx_q_num, &flags,
-+						   HIF_TX_DESC_NT))) {
-+		if (flags & HIF_DATA_VALID)
-+			dev_kfree_skb_any(skb);
-+	}
-+	if (!from_tx)
-+		__netif_tx_unlock_bh(tx_queue);
-+}
-+
-+/* pfe_eth_flush_tx
-+ */
-+static void pfe_eth_flush_tx(struct pfe_eth_priv_s *priv)
-+{
-+	int ii;
-+
-+	netif_info(priv, tx_done, priv->ndev, "%s\n", __func__);
-+
-+	for (ii = 0; ii < emac_txq_cnt; ii++)
-+		pfe_eth_flush_txQ(priv, ii, 0, 0);
-+}
-+
-+void pfe_tx_get_req_desc(struct sk_buff *skb, unsigned int *n_desc, unsigned int
-+				*n_segs)
-+{
-+	struct skb_shared_info *sh = skb_shinfo(skb);
-+
-+	/* Scattered data */
-+	if (sh->nr_frags) {
-+		*n_desc = sh->nr_frags + 1;
-+		*n_segs = 1;
-+	/* Regular case */
-+	} else {
-+		*n_desc = 1;
-+		*n_segs = 1;
-+	}
-+}
-+
-+/* pfe_eth_send_packet
-+ */
-+static int pfe_eth_send_packet(struct sk_buff *skb, struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	int tx_q_num = skb_get_queue_mapping(skb);
-+	int n_desc, n_segs;
-+	struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
-+								tx_q_num);
-+
-+	netif_info(priv, tx_queued, ndev, "%s\n", __func__);
-+
-+	if ((!skb_is_gso(skb)) && (skb_headroom(skb) < (PFE_PKT_HEADER_SZ +
-+			sizeof(unsigned long)))) {
-+		netif_warn(priv, tx_err, priv->ndev, "%s: copying skb\n",
-+			   __func__);
-+
-+		if (pskb_expand_head(skb, (PFE_PKT_HEADER_SZ + sizeof(unsigned
-+					long)), 0, GFP_ATOMIC)) {
-+			/* No need to re-transmit, no way to recover*/
-+			kfree_skb(skb);
-+			priv->stats.tx_dropped++;
-+			return NETDEV_TX_OK;
-+		}
-+	}
-+
-+	pfe_tx_get_req_desc(skb, &n_desc, &n_segs);
-+
-+	hif_tx_lock(&pfe->hif);
-+	if (unlikely(pfe_eth_might_stop_tx(priv, tx_q_num, tx_queue, n_desc,
-+					   n_segs))) {
-+#ifdef PFE_ETH_TX_STATS
-+		if (priv->was_stopped[tx_q_num]) {
-+			priv->clean_fail[tx_q_num]++;
-+			priv->was_stopped[tx_q_num] = 0;
-+		}
-+#endif
-+		hif_tx_unlock(&pfe->hif);
-+		return NETDEV_TX_BUSY;
-+	}
-+
-+	pfe_hif_send_packet(skb, priv, tx_q_num);
-+
-+	hif_tx_unlock(&pfe->hif);
-+
-+	tx_queue->trans_start = jiffies;
-+
-+#ifdef PFE_ETH_TX_STATS
-+	priv->was_stopped[tx_q_num] = 0;
-+#endif
-+
-+	return NETDEV_TX_OK;
-+}
-+
-+/* pfe_eth_select_queue
-+ *
-+ */
-+static u16 pfe_eth_select_queue(struct net_device *ndev, struct sk_buff *skb,
-+				struct net_device *sb_dev,
-+				select_queue_fallback_t fallback)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	return pfe_eth_get_queuenum(priv, skb);
-+}
-+
-+/* pfe_eth_get_stats
-+ */
-+static struct net_device_stats *pfe_eth_get_stats(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	netif_info(priv, drv, ndev, "%s\n", __func__);
-+
-+	return &priv->stats;
-+}
-+
-+/* pfe_eth_set_mac_address
-+ */
-+static int pfe_eth_set_mac_address(struct net_device *ndev, void *addr)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	struct sockaddr *sa = addr;
-+
-+	netif_info(priv, drv, ndev, "%s\n", __func__);
-+
-+	if (!is_valid_ether_addr(sa->sa_data))
-+		return -EADDRNOTAVAIL;
-+
-+	memcpy(ndev->dev_addr, sa->sa_data, ETH_ALEN);
-+
-+	gemac_set_laddrN(priv->EMAC_baseaddr,
-+			 (struct pfe_mac_addr *)ndev->dev_addr, 1);
-+
-+	return 0;
-+}
-+
-+/* pfe_eth_enet_addr_byte_mac
-+ */
-+int pfe_eth_enet_addr_byte_mac(u8 *enet_byte_addr,
-+			       struct pfe_mac_addr *enet_addr)
-+{
-+	if (!enet_byte_addr || !enet_addr) {
-+		return -1;
-+
-+	} else {
-+		enet_addr->bottom = enet_byte_addr[0] |
-+			(enet_byte_addr[1] << 8) |
-+			(enet_byte_addr[2] << 16) |
-+			(enet_byte_addr[3] << 24);
-+		enet_addr->top = enet_byte_addr[4] |
-+			(enet_byte_addr[5] << 8);
-+		return 0;
-+	}
-+}
-+
-+/* pfe_eth_set_multi
-+ */
-+static void pfe_eth_set_multi(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	struct pfe_mac_addr    hash_addr; /* hash register structure */
-+	/* specific mac address	register structure */
-+	struct pfe_mac_addr    spec_addr;
-+	int		result; /* index into hash register to set.. */
-+	int		uc_count = 0;
-+	struct netdev_hw_addr *ha;
-+
-+	if (ndev->flags & IFF_PROMISC) {
-+		netif_info(priv, drv, ndev, "entering promiscuous mode\n");
-+
-+		priv->promisc = 1;
-+		gemac_enable_copy_all(priv->EMAC_baseaddr);
-+	} else {
-+		priv->promisc = 0;
-+		gemac_disable_copy_all(priv->EMAC_baseaddr);
-+	}
-+
-+	/* Enable broadcast frame reception if required. */
-+	if (ndev->flags & IFF_BROADCAST) {
-+		gemac_allow_broadcast(priv->EMAC_baseaddr);
-+	} else {
-+		netif_info(priv, drv, ndev,
-+			   "disabling broadcast frame reception\n");
-+
-+		gemac_no_broadcast(priv->EMAC_baseaddr);
-+	}
-+
-+	if (ndev->flags & IFF_ALLMULTI) {
-+		/* Set the hash to rx all multicast frames */
-+		hash_addr.bottom = 0xFFFFFFFF;
-+		hash_addr.top = 0xFFFFFFFF;
-+		gemac_set_hash(priv->EMAC_baseaddr, &hash_addr);
-+		netdev_for_each_uc_addr(ha, ndev) {
-+			if (uc_count >= MAX_UC_SPEC_ADDR_REG)
-+				break;
-+			pfe_eth_enet_addr_byte_mac(ha->addr, &spec_addr);
-+			gemac_set_laddrN(priv->EMAC_baseaddr, &spec_addr,
-+					 uc_count + 2);
-+			uc_count++;
-+		}
-+	} else if ((netdev_mc_count(ndev) > 0)  || (netdev_uc_count(ndev))) {
-+		u8 *addr;
-+
-+		hash_addr.bottom = 0;
-+		hash_addr.top = 0;
-+
-+		netdev_for_each_mc_addr(ha, ndev) {
-+			addr = ha->addr;
-+
-+			netif_info(priv, drv, ndev,
-+				   "adding multicast address %X:%X:%X:%X:%X:%X to gem filter\n",
-+				addr[0], addr[1], addr[2],
-+				addr[3], addr[4], addr[5]);
-+
-+			result = pfe_eth_get_hash(addr);
-+
-+			if (result < EMAC_HASH_REG_BITS) {
-+				if (result < 32)
-+					hash_addr.bottom |= (1 << result);
-+				else
-+					hash_addr.top |= (1 << (result - 32));
-+			} else {
-+				break;
-+			}
-+		}
-+
-+		uc_count = -1;
-+		netdev_for_each_uc_addr(ha, ndev) {
-+			addr = ha->addr;
-+
-+			if (++uc_count < MAX_UC_SPEC_ADDR_REG)   {
-+				netdev_info(ndev,
-+					    "adding unicast address %02x:%02x:%02x:%02x:%02x:%02x to gem filter\n",
-+					    addr[0], addr[1], addr[2],
-+					    addr[3], addr[4], addr[5]);
-+				pfe_eth_enet_addr_byte_mac(addr, &spec_addr);
-+				gemac_set_laddrN(priv->EMAC_baseaddr,
-+						 &spec_addr, uc_count + 2);
-+			} else {
-+				netif_info(priv, drv, ndev,
-+					   "adding unicast address %02x:%02x:%02x:%02x:%02x:%02x to gem hash\n",
-+					   addr[0], addr[1], addr[2],
-+					   addr[3], addr[4], addr[5]);
-+
-+				result = pfe_eth_get_hash(addr);
-+				if (result >= EMAC_HASH_REG_BITS) {
-+					break;
-+
-+				} else {
-+					if (result < 32)
-+						hash_addr.bottom |= (1 <<
-+								result);
-+					else
-+						hash_addr.top |= (1 <<
-+								(result - 32));
-+				}
-+			}
-+		}
-+
-+		gemac_set_hash(priv->EMAC_baseaddr, &hash_addr);
-+	}
-+
-+	if (!(netdev_uc_count(ndev) >= MAX_UC_SPEC_ADDR_REG)) {
-+		/*
-+		 *  Check if there are any specific address HW registers that
-+		 * need to be flushed
-+		 */
-+		for (uc_count = netdev_uc_count(ndev); uc_count <
-+			MAX_UC_SPEC_ADDR_REG; uc_count++)
-+			gemac_clear_laddrN(priv->EMAC_baseaddr, uc_count + 2);
-+	}
-+
-+	if (ndev->flags & IFF_LOOPBACK)
-+		gemac_set_loop(priv->EMAC_baseaddr, LB_LOCAL);
-+}
-+
-+/* pfe_eth_set_features
-+ */
-+static int pfe_eth_set_features(struct net_device *ndev, netdev_features_t
-+					features)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	int rc = 0;
-+
-+	if (features & NETIF_F_RXCSUM)
-+		gemac_enable_rx_checksum_offload(priv->EMAC_baseaddr);
-+	else
-+		gemac_disable_rx_checksum_offload(priv->EMAC_baseaddr);
-+	return rc;
-+}
-+
-+/* pfe_eth_fast_tx_timeout
-+ */
-+static enum hrtimer_restart pfe_eth_fast_tx_timeout(struct hrtimer *timer)
-+{
-+	struct pfe_eth_fast_timer *fast_tx_timeout = container_of(timer, struct
-+							pfe_eth_fast_timer,
-+							timer);
-+	struct pfe_eth_priv_s *priv =  container_of(fast_tx_timeout->base,
-+							struct pfe_eth_priv_s,
-+							fast_tx_timeout);
-+	struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
-+						fast_tx_timeout->queuenum);
-+
-+	if (netif_tx_queue_stopped(tx_queue)) {
-+#ifdef PFE_ETH_TX_STATS
-+		priv->was_stopped[fast_tx_timeout->queuenum] = 1;
-+#endif
-+		netif_tx_wake_queue(tx_queue);
-+	}
-+
-+	return HRTIMER_NORESTART;
-+}
-+
-+/* pfe_eth_fast_tx_timeout_init
-+ */
-+static void pfe_eth_fast_tx_timeout_init(struct pfe_eth_priv_s *priv)
-+{
-+	int i;
-+
-+	for (i = 0; i < emac_txq_cnt; i++) {
-+		priv->fast_tx_timeout[i].queuenum = i;
-+		hrtimer_init(&priv->fast_tx_timeout[i].timer, CLOCK_MONOTONIC,
-+			     HRTIMER_MODE_REL);
-+		priv->fast_tx_timeout[i].timer.function =
-+				pfe_eth_fast_tx_timeout;
-+		priv->fast_tx_timeout[i].base = priv->fast_tx_timeout;
-+	}
-+}
-+
-+static struct sk_buff *pfe_eth_rx_skb(struct net_device *ndev,
-+				      struct	pfe_eth_priv_s *priv,
-+				      unsigned int qno)
-+{
-+	void *buf_addr;
-+	unsigned int rx_ctrl;
-+	unsigned int desc_ctrl = 0;
-+	struct hif_ipsec_hdr *ipsec_hdr = NULL;
-+	struct sk_buff *skb;
-+	struct sk_buff *skb_frag, *skb_frag_last = NULL;
-+	int length = 0, offset;
-+
-+	skb = priv->skb_inflight[qno];
-+
-+	if (skb) {
-+		skb_frag_last = skb_shinfo(skb)->frag_list;
-+		if (skb_frag_last) {
-+			while (skb_frag_last->next)
-+				skb_frag_last = skb_frag_last->next;
-+		}
-+	}
-+
-+	while (!(desc_ctrl & CL_DESC_LAST)) {
-+		buf_addr = hif_lib_receive_pkt(&priv->client, qno, &length,
-+					       &offset, &rx_ctrl, &desc_ctrl,
-+					       (void **)&ipsec_hdr);
-+		if (!buf_addr)
-+			goto incomplete;
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+		priv->napi_counters[NAPI_DESC_COUNT]++;
-+#endif
-+
-+		/* First frag */
-+		if (desc_ctrl & CL_DESC_FIRST) {
-+			skb = build_skb(buf_addr, 0);
-+			if (unlikely(!skb))
-+				goto pkt_drop;
-+
-+			skb_reserve(skb, offset);
-+			skb_put(skb, length);
-+			skb->dev = ndev;
-+
-+			if ((ndev->features & NETIF_F_RXCSUM) && (rx_ctrl &
-+					HIF_CTRL_RX_CHECKSUMMED))
-+				skb->ip_summed = CHECKSUM_UNNECESSARY;
-+			else
-+				skb_checksum_none_assert(skb);
-+
-+		} else {
-+			/* Next frags */
-+			if (unlikely(!skb)) {
-+				pr_err("%s: NULL skb_inflight\n",
-+				       __func__);
-+				goto pkt_drop;
-+			}
-+
-+			skb_frag = build_skb(buf_addr, 0);
-+
-+			if (unlikely(!skb_frag)) {
-+				kfree(buf_addr);
-+				goto pkt_drop;
-+			}
-+
-+			skb_reserve(skb_frag, offset);
-+			skb_put(skb_frag, length);
-+
-+			skb_frag->dev = ndev;
-+
-+			if (skb_shinfo(skb)->frag_list)
-+				skb_frag_last->next = skb_frag;
-+			else
-+				skb_shinfo(skb)->frag_list = skb_frag;
-+
-+			skb->truesize += skb_frag->truesize;
-+			skb->data_len += length;
-+			skb->len += length;
-+			skb_frag_last = skb_frag;
-+		}
-+	}
-+
-+	priv->skb_inflight[qno] = NULL;
-+	return skb;
-+
-+incomplete:
-+	priv->skb_inflight[qno] = skb;
-+	return NULL;
-+
-+pkt_drop:
-+	priv->skb_inflight[qno] = NULL;
-+
-+	if (skb)
-+		kfree_skb(skb);
-+	else
-+		kfree(buf_addr);
-+
-+	priv->stats.rx_errors++;
-+
-+	return NULL;
-+}
-+
-+/* pfe_eth_poll
-+ */
-+static int pfe_eth_poll(struct pfe_eth_priv_s *priv, struct napi_struct *napi,
-+			unsigned int qno, int budget)
-+{
-+	struct net_device *ndev = priv->ndev;
-+	struct sk_buff *skb;
-+	int work_done = 0;
-+	unsigned int len;
-+
-+	netif_info(priv, intr, priv->ndev, "%s\n", __func__);
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+	priv->napi_counters[NAPI_POLL_COUNT]++;
-+#endif
-+
-+	do {
-+		skb = pfe_eth_rx_skb(ndev, priv, qno);
-+
-+		if (!skb)
-+			break;
-+
-+		len = skb->len;
-+
-+		/* Packet will be processed */
-+		skb->protocol = eth_type_trans(skb, ndev);
-+
-+		netif_receive_skb(skb);
-+
-+		priv->stats.rx_packets++;
-+		priv->stats.rx_bytes += len;
-+
-+		work_done++;
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+		priv->napi_counters[NAPI_PACKET_COUNT]++;
-+#endif
-+
-+	} while (work_done < budget);
-+
-+	/*
-+	 * If no Rx receive nor cleanup work was done, exit polling mode.
-+	 * No more netif_running(dev) check is required here , as this is
-+	 * checked in net/core/dev.c (2.6.33.5 kernel specific).
-+	 */
-+	if (work_done < budget) {
-+		napi_complete(napi);
-+
-+		hif_lib_event_handler_start(&priv->client, EVENT_RX_PKT_IND,
-+					    qno);
-+	}
-+#ifdef PFE_ETH_NAPI_STATS
-+	else
-+		priv->napi_counters[NAPI_FULL_BUDGET_COUNT]++;
-+#endif
-+
-+	return work_done;
-+}
-+
-+/*
-+ * pfe_eth_lro_poll
-+ */
-+static int pfe_eth_lro_poll(struct napi_struct *napi, int budget)
-+{
-+	struct pfe_eth_priv_s *priv = container_of(napi, struct pfe_eth_priv_s,
-+							lro_napi);
-+
-+	netif_info(priv, intr, priv->ndev, "%s\n", __func__);
-+
-+	return pfe_eth_poll(priv, napi, 2, budget);
-+}
-+
-+/* pfe_eth_low_poll
-+ */
-+static int pfe_eth_low_poll(struct napi_struct *napi, int budget)
-+{
-+	struct pfe_eth_priv_s *priv = container_of(napi, struct pfe_eth_priv_s,
-+							low_napi);
-+
-+	netif_info(priv, intr, priv->ndev, "%s\n", __func__);
-+
-+	return pfe_eth_poll(priv, napi, 1, budget);
-+}
-+
-+/* pfe_eth_high_poll
-+ */
-+static int pfe_eth_high_poll(struct napi_struct *napi, int budget)
-+{
-+	struct pfe_eth_priv_s *priv = container_of(napi, struct pfe_eth_priv_s,
-+							high_napi);
-+
-+	netif_info(priv, intr, priv->ndev, "%s\n", __func__);
-+
-+	return pfe_eth_poll(priv, napi, 0, budget);
-+}
-+
-+static const struct net_device_ops pfe_netdev_ops = {
-+	.ndo_open = pfe_eth_open,
-+	.ndo_stop = pfe_eth_close,
-+	.ndo_start_xmit = pfe_eth_send_packet,
-+	.ndo_select_queue = pfe_eth_select_queue,
-+	.ndo_get_stats = pfe_eth_get_stats,
-+	.ndo_set_mac_address = pfe_eth_set_mac_address,
-+	.ndo_set_rx_mode = pfe_eth_set_multi,
-+	.ndo_set_features = pfe_eth_set_features,
-+	.ndo_validate_addr = eth_validate_addr,
-+};
-+
-+/* pfe_eth_init_one
-+ */
-+static int pfe_eth_init_one(struct pfe *pfe, int id)
-+{
-+	struct net_device *ndev = NULL;
-+	struct pfe_eth_priv_s *priv = NULL;
-+	struct ls1012a_eth_platform_data *einfo;
-+	struct ls1012a_mdio_platform_data *minfo;
-+	struct ls1012a_pfe_platform_data *pfe_info;
-+	int err;
-+
-+	/* Extract pltform data */
-+	pfe_info = (struct ls1012a_pfe_platform_data *)
-+					pfe->dev->platform_data;
-+	if (!pfe_info) {
-+		pr_err(
-+			"%s: pfe missing additional platform data\n"
-+			, __func__);
-+		err = -ENODEV;
-+		goto err0;
-+	}
-+
-+	einfo = (struct ls1012a_eth_platform_data *)
-+				pfe_info->ls1012a_eth_pdata;
-+
-+	/* einfo never be NULL, but no harm in having this check */
-+	if (!einfo) {
-+		pr_err(
-+			"%s: pfe missing additional gemacs platform data\n"
-+			, __func__);
-+		err = -ENODEV;
-+		goto err0;
-+	}
-+
-+	minfo = (struct ls1012a_mdio_platform_data *)
-+				pfe_info->ls1012a_mdio_pdata;
-+
-+	/* einfo never be NULL, but no harm in having this check */
-+	if (!minfo) {
-+		pr_err(
-+			"%s: pfe missing additional mdios platform data\n",
-+			 __func__);
-+		err = -ENODEV;
-+		goto err0;
-+	}
-+
-+	/* Create an ethernet device instance */
-+	ndev = alloc_etherdev_mq(sizeof(*priv), emac_txq_cnt);
-+
-+	if (!ndev) {
-+		pr_err("%s: gemac %d device allocation failed\n",
-+		       __func__, einfo[id].gem_id);
-+		err = -ENOMEM;
-+		goto err0;
-+	}
-+
-+	priv = netdev_priv(ndev);
-+	priv->ndev = ndev;
-+	priv->id = einfo[id].gem_id;
-+	priv->pfe = pfe;
-+
-+	SET_NETDEV_DEV(priv->ndev, priv->pfe->dev);
-+
-+	pfe->eth.eth_priv[id] = priv;
-+
-+	/* Set the info in the priv to the current info */
-+	priv->einfo = &einfo[id];
-+	priv->EMAC_baseaddr = cbus_emac_base[id];
-+	priv->PHY_baseaddr = cbus_emac_base[0];
-+	priv->GPI_baseaddr = cbus_gpi_base[id];
-+
-+#define HIF_GEMAC_TMUQ_BASE	6
-+	priv->low_tmu_q	=  HIF_GEMAC_TMUQ_BASE + (id * 2);
-+	priv->high_tmu_q	=  priv->low_tmu_q + 1;
-+
-+	spin_lock_init(&priv->lock);
-+
-+	pfe_eth_fast_tx_timeout_init(priv);
-+
-+	/* Copy the station address into the dev structure, */
-+	memcpy(ndev->dev_addr, einfo[id].mac_addr, ETH_ALEN);
-+
-+	/* Initialize mdio */
-+	if (minfo[id].enabled) {
-+		err = pfe_eth_mdio_init(priv, &minfo[id]);
-+		if (err) {
-+			netdev_err(ndev, "%s: pfe_eth_mdio_init() failed\n",
-+				   __func__);
-+			goto err2;
-+		}
-+	}
-+
-+	ndev->mtu = 1500;
-+
-+	/* Set MTU limits */
-+	ndev->min_mtu = ETH_MIN_MTU;
-+	ndev->max_mtu = JUMBO_FRAME_SIZE;
-+
-+	/* supported features */
-+	ndev->hw_features = NETIF_F_SG;
-+
-+	/*Enable after checksum offload is validated */
-+	ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM |
-+		NETIF_F_IPV6_CSUM | NETIF_F_SG;
-+
-+	/* enabled by default */
-+	ndev->features = ndev->hw_features;
-+
-+	priv->usr_features = ndev->features;
-+
-+	ndev->netdev_ops = &pfe_netdev_ops;
-+
-+	ndev->ethtool_ops = &pfe_ethtool_ops;
-+
-+	/* Enable basic messages by default */
-+	priv->msg_enable = NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK |
-+				NETIF_MSG_PROBE;
-+
-+	netif_napi_add(ndev, &priv->low_napi, pfe_eth_low_poll,
-+		       HIF_RX_POLL_WEIGHT - 16);
-+	netif_napi_add(ndev, &priv->high_napi, pfe_eth_high_poll,
-+		       HIF_RX_POLL_WEIGHT - 16);
-+	netif_napi_add(ndev, &priv->lro_napi, pfe_eth_lro_poll,
-+		       HIF_RX_POLL_WEIGHT - 16);
-+
-+	err = register_netdev(ndev);
-+
-+	if (err) {
-+		netdev_err(ndev, "register_netdev() failed\n");
-+		goto err3;
-+	}
-+	device_init_wakeup(&ndev->dev, WAKE_MAGIC);
-+
-+	if (!(priv->einfo->phy_flags & GEMAC_NO_PHY)) {
-+		err = pfe_phy_init(ndev);
-+		if (err) {
-+			netdev_err(ndev, "%s: pfe_phy_init() failed\n",
-+				   __func__);
-+			goto err4;
-+		}
-+	}
-+
-+	netif_carrier_on(ndev);
-+
-+	/* Create all the sysfs files */
-+	if (pfe_eth_sysfs_init(ndev))
-+		goto err4;
-+
-+	netif_info(priv, probe, ndev, "%s: created interface, baseaddr: %p\n",
-+		   __func__, priv->EMAC_baseaddr);
-+
-+	return 0;
-+err4:
-+	unregister_netdev(ndev);
-+err3:
-+	pfe_eth_mdio_exit(priv->mii_bus);
-+err2:
-+	free_netdev(priv->ndev);
-+err0:
-+	return err;
-+}
-+
-+/* pfe_eth_init
-+ */
-+int pfe_eth_init(struct pfe *pfe)
-+{
-+	int ii = 0;
-+	int err;
-+
-+	pr_info("%s\n", __func__);
-+
-+	cbus_emac_base[0] = EMAC1_BASE_ADDR;
-+	cbus_emac_base[1] = EMAC2_BASE_ADDR;
-+
-+	cbus_gpi_base[0] = EGPI1_BASE_ADDR;
-+	cbus_gpi_base[1] = EGPI2_BASE_ADDR;
-+
-+	for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) {
-+		err = pfe_eth_init_one(pfe, ii);
-+		if (err)
-+			goto err0;
-+	}
-+
-+	return 0;
-+
-+err0:
-+	while (ii--)
-+		pfe_eth_exit_one(pfe->eth.eth_priv[ii]);
-+
-+	/* Register three network devices in the kernel */
-+	return err;
-+}
-+
-+/* pfe_eth_exit_one
-+ */
-+static void pfe_eth_exit_one(struct pfe_eth_priv_s *priv)
-+{
-+	netif_info(priv, probe, priv->ndev, "%s\n", __func__);
-+
-+	pfe_eth_sysfs_exit(priv->ndev);
-+
-+	unregister_netdev(priv->ndev);
-+
-+	if (!(priv->einfo->phy_flags & GEMAC_NO_PHY))
-+		pfe_phy_exit(priv->ndev);
-+
-+	if (priv->mii_bus)
-+		pfe_eth_mdio_exit(priv->mii_bus);
-+
-+	free_netdev(priv->ndev);
-+}
-+
-+/* pfe_eth_exit
-+ */
-+void pfe_eth_exit(struct pfe *pfe)
-+{
-+	int ii;
-+
-+	pr_info("%s\n", __func__);
-+
-+	for (ii = NUM_GEMAC_SUPPORT - 1; ii >= 0; ii--)
-+		pfe_eth_exit_one(pfe->eth.eth_priv[ii]);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_firmware.c
-@@ -0,0 +1,314 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+/*
-+ * @file
-+ * Contains all the functions to handle parsing and loading of PE firmware
-+ * files.
-+ */
-+#include <linux/firmware.h>
-+
-+#include "pfe_mod.h"
-+#include "pfe_firmware.h"
-+#include "pfe/pfe.h"
-+
-+static struct elf32_shdr *get_elf_section_header(const struct firmware *fw,
-+						 const char *section)
-+{
-+	struct elf32_hdr *elf_hdr = (struct elf32_hdr *)fw->data;
-+	struct elf32_shdr *shdr;
-+	struct elf32_shdr *shdr_shstr;
-+	Elf32_Off e_shoff = be32_to_cpu(elf_hdr->e_shoff);
-+	Elf32_Half e_shentsize = be16_to_cpu(elf_hdr->e_shentsize);
-+	Elf32_Half e_shnum = be16_to_cpu(elf_hdr->e_shnum);
-+	Elf32_Half e_shstrndx = be16_to_cpu(elf_hdr->e_shstrndx);
-+	Elf32_Off shstr_offset;
-+	Elf32_Word sh_name;
-+	const char *name;
-+	int i;
-+
-+	/* Section header strings */
-+	shdr_shstr = (struct elf32_shdr *)(fw->data + e_shoff + e_shstrndx *
-+					e_shentsize);
-+	shstr_offset = be32_to_cpu(shdr_shstr->sh_offset);
-+
-+	for (i = 0; i < e_shnum; i++) {
-+		shdr = (struct elf32_shdr *)(fw->data + e_shoff
-+					     + i * e_shentsize);
-+
-+		sh_name = be32_to_cpu(shdr->sh_name);
-+
-+		name = (const char *)(fw->data + shstr_offset + sh_name);
-+
-+		if (!strcmp(name, section))
-+			return shdr;
-+	}
-+
-+	pr_err("%s: didn't find section %s\n", __func__, section);
-+
-+	return NULL;
-+}
-+
-+#if defined(CFG_DIAGS)
-+static int pfe_get_diags_info(const struct firmware *fw, struct pfe_diags_info
-+				*diags_info)
-+{
-+	struct elf32_shdr *shdr;
-+	unsigned long offset, size;
-+
-+	shdr = get_elf_section_header(fw, ".pfe_diags_str");
-+	if (shdr) {
-+		offset = be32_to_cpu(shdr->sh_offset);
-+		size = be32_to_cpu(shdr->sh_size);
-+		diags_info->diags_str_base = be32_to_cpu(shdr->sh_addr);
-+		diags_info->diags_str_size = size;
-+		diags_info->diags_str_array = kmalloc(size, GFP_KERNEL);
-+		memcpy(diags_info->diags_str_array, fw->data + offset, size);
-+
-+		return 0;
-+	} else {
-+		return -1;
-+	}
-+}
-+#endif
-+
-+static void pfe_check_version_info(const struct firmware *fw)
-+{
-+	/*static char *version = NULL;*/
-+	static char *version;
-+
-+	struct elf32_shdr *shdr = get_elf_section_header(fw, ".version");
-+
-+	if (shdr) {
-+		if (!version) {
-+			/*
-+			 * this is the first fw we load, use its version
-+			 * string as reference (whatever it is)
-+			 */
-+			version = (char *)(fw->data +
-+					be32_to_cpu(shdr->sh_offset));
-+
-+			pr_info("PFE binary version: %s\n", version);
-+		} else {
-+			/*
-+			 * already have loaded at least one firmware, check
-+			 * sequence can start now
-+			 */
-+			if (strcmp(version, (char *)(fw->data +
-+				be32_to_cpu(shdr->sh_offset)))) {
-+				pr_info(
-+				"WARNING: PFE firmware binaries from incompatible version\n");
-+			}
-+		}
-+	} else {
-+		/*
-+		 * version cannot be verified, a potential issue that should
-+		 * be reported
-+		 */
-+		pr_info(
-+			 "WARNING: PFE firmware binaries from incompatible version\n");
-+	}
-+}
-+
-+/* PFE elf firmware loader.
-+ * Loads an elf firmware image into a list of PE's (specified using a bitmask)
-+ *
-+ * @param pe_mask	Mask of PE id's to load firmware to
-+ * @param fw		Pointer to the firmware image
-+ *
-+ * @return		0 on success, a negative value on error
-+ *
-+ */
-+int pfe_load_elf(int pe_mask, const struct firmware *fw, struct pfe *pfe)
-+{
-+	struct elf32_hdr *elf_hdr = (struct elf32_hdr *)fw->data;
-+	Elf32_Half sections = be16_to_cpu(elf_hdr->e_shnum);
-+	struct elf32_shdr *shdr = (struct elf32_shdr *)(fw->data +
-+					be32_to_cpu(elf_hdr->e_shoff));
-+	int id, section;
-+	int rc;
-+
-+	pr_info("%s\n", __func__);
-+
-+	/* Some sanity checks */
-+	if (strncmp(&elf_hdr->e_ident[EI_MAG0], ELFMAG, SELFMAG)) {
-+		pr_err("%s: incorrect elf magic number\n", __func__);
-+		return -EINVAL;
-+	}
-+
-+	if (elf_hdr->e_ident[EI_CLASS] != ELFCLASS32) {
-+		pr_err("%s: incorrect elf class(%x)\n", __func__,
-+		       elf_hdr->e_ident[EI_CLASS]);
-+		return -EINVAL;
-+	}
-+
-+	if (elf_hdr->e_ident[EI_DATA] != ELFDATA2MSB) {
-+		pr_err("%s: incorrect elf data(%x)\n", __func__,
-+		       elf_hdr->e_ident[EI_DATA]);
-+		return -EINVAL;
-+	}
-+
-+	if (be16_to_cpu(elf_hdr->e_type) != ET_EXEC) {
-+		pr_err("%s: incorrect elf file type(%x)\n", __func__,
-+		       be16_to_cpu(elf_hdr->e_type));
-+		return -EINVAL;
-+	}
-+
-+	for (section = 0; section < sections; section++, shdr++) {
-+		if (!(be32_to_cpu(shdr->sh_flags) & (SHF_WRITE | SHF_ALLOC |
-+			SHF_EXECINSTR)))
-+			continue;
-+
-+		for (id = 0; id < MAX_PE; id++)
-+			if (pe_mask & (1 << id)) {
-+				rc = pe_load_elf_section(id, fw->data, shdr,
-+							 pfe->dev);
-+				if (rc < 0)
-+					goto err;
-+			}
-+	}
-+
-+	pfe_check_version_info(fw);
-+
-+	return 0;
-+
-+err:
-+	return rc;
-+}
-+
-+/* PFE firmware initialization.
-+ * Loads different firmware files from filesystem.
-+ * Initializes PE IMEM/DMEM and UTIL-PE DDR
-+ * Initializes control path symbol addresses (by looking them up in the elf
-+ * firmware files
-+ * Takes PE's out of reset
-+ *
-+ * @return	0 on success, a negative value on error
-+ *
-+ */
-+int pfe_firmware_init(struct pfe *pfe)
-+{
-+	const struct firmware *class_fw, *tmu_fw;
-+	int rc = 0;
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	const char *util_fw_name;
-+	const struct firmware *util_fw;
-+#endif
-+
-+	pr_info("%s\n", __func__);
-+
-+	if (request_firmware(&class_fw, CLASS_FIRMWARE_FILENAME, pfe->dev)) {
-+		pr_err("%s: request firmware %s failed\n", __func__,
-+		       CLASS_FIRMWARE_FILENAME);
-+		rc = -ETIMEDOUT;
-+		goto err0;
-+	}
-+
-+	if (request_firmware(&tmu_fw, TMU_FIRMWARE_FILENAME, pfe->dev)) {
-+		pr_err("%s: request firmware %s failed\n", __func__,
-+		       TMU_FIRMWARE_FILENAME);
-+		rc = -ETIMEDOUT;
-+		goto err1;
-+}
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	util_fw_name = UTIL_FIRMWARE_FILENAME;
-+
-+	if (request_firmware(&util_fw, util_fw_name, pfe->dev)) {
-+		pr_err("%s: request firmware %s failed\n", __func__,
-+		       util_fw_name);
-+		rc = -ETIMEDOUT;
-+		goto err2;
-+	}
-+#endif
-+	rc = pfe_load_elf(CLASS_MASK, class_fw, pfe);
-+	if (rc < 0) {
-+		pr_err("%s: class firmware load failed\n", __func__);
-+		goto err3;
-+	}
-+
-+#if defined(CFG_DIAGS)
-+	rc = pfe_get_diags_info(class_fw, &pfe->diags.class_diags_info);
-+	if (rc < 0) {
-+		pr_warn(
-+			"PFE diags won't be available for class PEs\n");
-+		rc = 0;
-+	}
-+#endif
-+
-+	rc = pfe_load_elf(TMU_MASK, tmu_fw, pfe);
-+	if (rc < 0) {
-+		pr_err("%s: tmu firmware load failed\n", __func__);
-+		goto err3;
-+	}
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	rc = pfe_load_elf(UTIL_MASK, util_fw, pfe);
-+	if (rc < 0) {
-+		pr_err("%s: util firmware load failed\n", __func__);
-+		goto err3;
-+	}
-+
-+#if defined(CFG_DIAGS)
-+	rc = pfe_get_diags_info(util_fw, &pfe->diags.util_diags_info);
-+	if (rc < 0) {
-+		pr_warn(
-+			"PFE diags won't be available for util PE\n");
-+		rc = 0;
-+	}
-+#endif
-+
-+	util_enable();
-+#endif
-+
-+	tmu_enable(0xf);
-+	class_enable();
-+
-+err3:
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	release_firmware(util_fw);
-+
-+err2:
-+#endif
-+	release_firmware(tmu_fw);
-+
-+err1:
-+	release_firmware(class_fw);
-+
-+err0:
-+	return rc;
-+}
-+
-+/* PFE firmware cleanup
-+ * Puts PE's in reset
-+ *
-+ *
-+ */
-+void pfe_firmware_exit(struct pfe *pfe)
-+{
-+	pr_info("%s\n", __func__);
-+
-+	if (pe_reset_all(&pfe->ctrl) != 0)
-+		pr_err("Error: Failed to stop PEs, PFE reload may not work correctly\n");
-+
-+	class_disable();
-+	tmu_disable(0xf);
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	util_disable();
-+#endif
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_hal.c
-@@ -0,0 +1,1516 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include "pfe_mod.h"
-+#include "pfe/pfe.h"
-+
-+void *cbus_base_addr;
-+void *ddr_base_addr;
-+unsigned long ddr_phys_base_addr;
-+unsigned int ddr_size;
-+
-+static struct pe_info pe[MAX_PE];
-+
-+/* Initializes the PFE library.
-+ * Must be called before using any of the library functions.
-+ *
-+ * @param[in] cbus_base		CBUS virtual base address (as mapped in
-+ * the host CPU address space)
-+ * @param[in] ddr_base		PFE DDR range virtual base address (as
-+ * mapped in the host CPU address space)
-+ * @param[in] ddr_phys_base	PFE DDR range physical base address (as
-+ * mapped in platform)
-+ * @param[in] size		PFE DDR range size (as defined by the host
-+ * software)
-+ */
-+void pfe_lib_init(void *cbus_base, void *ddr_base, unsigned long ddr_phys_base,
-+		  unsigned int size)
-+{
-+	cbus_base_addr = cbus_base;
-+	ddr_base_addr = ddr_base;
-+	ddr_phys_base_addr = ddr_phys_base;
-+	ddr_size = size;
-+
-+	pe[CLASS0_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(0);
-+	pe[CLASS0_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(0);
-+	pe[CLASS0_ID].pmem_size = CLASS_IMEM_SIZE;
-+	pe[CLASS0_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
-+	pe[CLASS0_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
-+	pe[CLASS0_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
-+
-+	pe[CLASS1_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(1);
-+	pe[CLASS1_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(1);
-+	pe[CLASS1_ID].pmem_size = CLASS_IMEM_SIZE;
-+	pe[CLASS1_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
-+	pe[CLASS1_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
-+	pe[CLASS1_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
-+
-+	pe[CLASS2_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(2);
-+	pe[CLASS2_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(2);
-+	pe[CLASS2_ID].pmem_size = CLASS_IMEM_SIZE;
-+	pe[CLASS2_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
-+	pe[CLASS2_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
-+	pe[CLASS2_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
-+
-+	pe[CLASS3_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(3);
-+	pe[CLASS3_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(3);
-+	pe[CLASS3_ID].pmem_size = CLASS_IMEM_SIZE;
-+	pe[CLASS3_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
-+	pe[CLASS3_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
-+	pe[CLASS3_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
-+
-+	pe[CLASS4_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(4);
-+	pe[CLASS4_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(4);
-+	pe[CLASS4_ID].pmem_size = CLASS_IMEM_SIZE;
-+	pe[CLASS4_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
-+	pe[CLASS4_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
-+	pe[CLASS4_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
-+
-+	pe[CLASS5_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(5);
-+	pe[CLASS5_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(5);
-+	pe[CLASS5_ID].pmem_size = CLASS_IMEM_SIZE;
-+	pe[CLASS5_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
-+	pe[CLASS5_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
-+	pe[CLASS5_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
-+
-+	pe[TMU0_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(0);
-+	pe[TMU0_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(0);
-+	pe[TMU0_ID].pmem_size = TMU_IMEM_SIZE;
-+	pe[TMU0_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA;
-+	pe[TMU0_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR;
-+	pe[TMU0_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA;
-+
-+	pe[TMU1_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(1);
-+	pe[TMU1_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(1);
-+	pe[TMU1_ID].pmem_size = TMU_IMEM_SIZE;
-+	pe[TMU1_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA;
-+	pe[TMU1_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR;
-+	pe[TMU1_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA;
-+
-+	pe[TMU3_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(3);
-+	pe[TMU3_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(3);
-+	pe[TMU3_ID].pmem_size = TMU_IMEM_SIZE;
-+	pe[TMU3_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA;
-+	pe[TMU3_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR;
-+	pe[TMU3_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA;
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	pe[UTIL_ID].dmem_base_addr = UTIL_DMEM_BASE_ADDR;
-+	pe[UTIL_ID].mem_access_wdata = UTIL_MEM_ACCESS_WDATA;
-+	pe[UTIL_ID].mem_access_addr = UTIL_MEM_ACCESS_ADDR;
-+	pe[UTIL_ID].mem_access_rdata = UTIL_MEM_ACCESS_RDATA;
-+#endif
-+}
-+
-+/* Writes a buffer to PE internal memory from the host
-+ * through indirect access registers.
-+ *
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., UTIL_ID)
-+ * @param[in] src		Buffer source address
-+ * @param[in] mem_access_addr	DMEM destination address (must be 32bit
-+ * aligned)
-+ * @param[in] len		Number of bytes to copy
-+ */
-+void pe_mem_memcpy_to32(int id, u32 mem_access_addr, const void *src, unsigned
-+int len)
-+{
-+	u32 offset = 0, val, addr;
-+	unsigned int len32 = len >> 2;
-+	int i;
-+
-+	addr = mem_access_addr | PE_MEM_ACCESS_WRITE |
-+		PE_MEM_ACCESS_BYTE_ENABLE(0, 4);
-+
-+	for (i = 0; i < len32; i++, offset += 4, src += 4) {
-+		val = *(u32 *)src;
-+		writel(cpu_to_be32(val), pe[id].mem_access_wdata);
-+		writel(addr + offset, pe[id].mem_access_addr);
-+	}
-+
-+	len = (len & 0x3);
-+	if (len) {
-+		val = 0;
-+
-+		addr = (mem_access_addr | PE_MEM_ACCESS_WRITE |
-+			PE_MEM_ACCESS_BYTE_ENABLE(0, len)) + offset;
-+
-+		for (i = 0; i < len; i++, src++)
-+			val |= (*(u8 *)src) << (8 * i);
-+
-+		writel(cpu_to_be32(val), pe[id].mem_access_wdata);
-+		writel(addr, pe[id].mem_access_addr);
-+	}
-+}
-+
-+/* Writes a buffer to PE internal data memory (DMEM) from the host
-+ * through indirect access registers.
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., UTIL_ID)
-+ * @param[in] src		Buffer source address
-+ * @param[in] dst		DMEM destination address (must be 32bit
-+ * aligned)
-+ * @param[in] len		Number of bytes to copy
-+ */
-+void pe_dmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len)
-+{
-+	pe_mem_memcpy_to32(id, pe[id].dmem_base_addr | dst |
-+				PE_MEM_ACCESS_DMEM, src, len);
-+}
-+
-+/* Writes a buffer to PE internal program memory (PMEM) from the host
-+ * through indirect access registers.
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., TMU3_ID)
-+ * @param[in] src		Buffer source address
-+ * @param[in] dst		PMEM destination address (must be 32bit
-+ * aligned)
-+ * @param[in] len		Number of bytes to copy
-+ */
-+void pe_pmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len)
-+{
-+	pe_mem_memcpy_to32(id, pe[id].pmem_base_addr | (dst & (pe[id].pmem_size
-+				- 1)) | PE_MEM_ACCESS_IMEM, src, len);
-+}
-+
-+/* Reads PE internal program memory (IMEM) from the host
-+ * through indirect access registers.
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., TMU3_ID)
-+ * @param[in] addr		PMEM read address (must be aligned on size)
-+ * @param[in] size		Number of bytes to read (maximum 4, must not
-+ * cross 32bit boundaries)
-+ * @return			the data read (in PE endianness, i.e BE).
-+ */
-+u32 pe_pmem_read(int id, u32 addr, u8 size)
-+{
-+	u32 offset = addr & 0x3;
-+	u32 mask = 0xffffffff >> ((4 - size) << 3);
-+	u32 val;
-+
-+	addr = pe[id].pmem_base_addr | ((addr & ~0x3) & (pe[id].pmem_size - 1))
-+		| PE_MEM_ACCESS_IMEM | PE_MEM_ACCESS_BYTE_ENABLE(offset, size);
-+
-+	writel(addr, pe[id].mem_access_addr);
-+	val = be32_to_cpu(readl(pe[id].mem_access_rdata));
-+
-+	return (val >> (offset << 3)) & mask;
-+}
-+
-+/* Writes PE internal data memory (DMEM) from the host
-+ * through indirect access registers.
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., UTIL_ID)
-+ * @param[in] addr		DMEM write address (must be aligned on size)
-+ * @param[in] val		Value to write (in PE endianness, i.e BE)
-+ * @param[in] size		Number of bytes to write (maximum 4, must not
-+ * cross 32bit boundaries)
-+ */
-+void pe_dmem_write(int id, u32 val, u32 addr, u8 size)
-+{
-+	u32 offset = addr & 0x3;
-+
-+	addr = pe[id].dmem_base_addr | (addr & ~0x3) | PE_MEM_ACCESS_WRITE |
-+		PE_MEM_ACCESS_DMEM | PE_MEM_ACCESS_BYTE_ENABLE(offset, size);
-+
-+	/* Indirect access interface is byte swapping data being written */
-+	writel(cpu_to_be32(val << (offset << 3)), pe[id].mem_access_wdata);
-+	writel(addr, pe[id].mem_access_addr);
-+}
-+
-+/* Reads PE internal data memory (DMEM) from the host
-+ * through indirect access registers.
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., UTIL_ID)
-+ * @param[in] addr		DMEM read address (must be aligned on size)
-+ * @param[in] size		Number of bytes to read (maximum 4, must not
-+ * cross 32bit boundaries)
-+ * @return			the data read (in PE endianness, i.e BE).
-+ */
-+u32 pe_dmem_read(int id, u32 addr, u8 size)
-+{
-+	u32 offset = addr & 0x3;
-+	u32 mask = 0xffffffff >> ((4 - size) << 3);
-+	u32 val;
-+
-+	addr = pe[id].dmem_base_addr | (addr & ~0x3) | PE_MEM_ACCESS_DMEM |
-+			PE_MEM_ACCESS_BYTE_ENABLE(offset, size);
-+
-+	writel(addr, pe[id].mem_access_addr);
-+
-+	/* Indirect access interface is byte swapping data being read */
-+	val = be32_to_cpu(readl(pe[id].mem_access_rdata));
-+
-+	return (val >> (offset << 3)) & mask;
-+}
-+
-+/* This function is used to write to CLASS internal bus peripherals (ccu,
-+ * pe-lem) from the host
-+ * through indirect access registers.
-+ * @param[in]	val	value to write
-+ * @param[in]	addr	Address to write to (must be aligned on size)
-+ * @param[in]	size	Number of bytes to write (1, 2 or 4)
-+ *
-+ */
-+void class_bus_write(u32 val, u32 addr, u8 size)
-+{
-+	u32 offset = addr & 0x3;
-+
-+	writel((addr & CLASS_BUS_ACCESS_BASE_MASK), CLASS_BUS_ACCESS_BASE);
-+
-+	addr = (addr & ~CLASS_BUS_ACCESS_BASE_MASK) | PE_MEM_ACCESS_WRITE |
-+			(size << 24);
-+
-+	writel(cpu_to_be32(val << (offset << 3)), CLASS_BUS_ACCESS_WDATA);
-+	writel(addr, CLASS_BUS_ACCESS_ADDR);
-+}
-+
-+/* Reads from CLASS internal bus peripherals (ccu, pe-lem) from the host
-+ * through indirect access registers.
-+ * @param[in] addr	Address to read from (must be aligned on size)
-+ * @param[in] size	Number of bytes to read (1, 2 or 4)
-+ * @return		the read data
-+ *
-+ */
-+u32 class_bus_read(u32 addr, u8 size)
-+{
-+	u32 offset = addr & 0x3;
-+	u32 mask = 0xffffffff >> ((4 - size) << 3);
-+	u32 val;
-+
-+	writel((addr & CLASS_BUS_ACCESS_BASE_MASK), CLASS_BUS_ACCESS_BASE);
-+
-+	addr = (addr & ~CLASS_BUS_ACCESS_BASE_MASK) | (size << 24);
-+
-+	writel(addr, CLASS_BUS_ACCESS_ADDR);
-+	val = be32_to_cpu(readl(CLASS_BUS_ACCESS_RDATA));
-+
-+	return (val >> (offset << 3)) & mask;
-+}
-+
-+/* Writes data to the cluster memory (PE_LMEM)
-+ * @param[in] dst	PE LMEM destination address (must be 32bit aligned)
-+ * @param[in] src	Buffer source address
-+ * @param[in] len	Number of bytes to copy
-+ */
-+void class_pe_lmem_memcpy_to32(u32 dst, const void *src, unsigned int len)
-+{
-+	u32 len32 = len >> 2;
-+	int i;
-+
-+	for (i = 0; i < len32; i++, src += 4, dst += 4)
-+		class_bus_write(*(u32 *)src, dst, 4);
-+
-+	if (len & 0x2) {
-+		class_bus_write(*(u16 *)src, dst, 2);
-+		src += 2;
-+		dst += 2;
-+	}
-+
-+	if (len & 0x1) {
-+		class_bus_write(*(u8 *)src, dst, 1);
-+		src++;
-+		dst++;
-+	}
-+}
-+
-+/* Writes value to the cluster memory (PE_LMEM)
-+ * @param[in] dst	PE LMEM destination address (must be 32bit aligned)
-+ * @param[in] val	Value to write
-+ * @param[in] len	Number of bytes to write
-+ */
-+void class_pe_lmem_memset(u32 dst, int val, unsigned int len)
-+{
-+	u32 len32 = len >> 2;
-+	int i;
-+
-+	val = val | (val << 8) | (val << 16) | (val << 24);
-+
-+	for (i = 0; i < len32; i++, dst += 4)
-+		class_bus_write(val, dst, 4);
-+
-+	if (len & 0x2) {
-+		class_bus_write(val, dst, 2);
-+		dst += 2;
-+	}
-+
-+	if (len & 0x1) {
-+		class_bus_write(val, dst, 1);
-+		dst++;
-+	}
-+}
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+
-+/* Writes UTIL program memory (DDR) from the host.
-+ *
-+ * @param[in] addr	Address to write (virtual, must be aligned on size)
-+ * @param[in] val		Value to write (in PE endianness, i.e BE)
-+ * @param[in] size		Number of bytes to write (2 or 4)
-+ */
-+static void util_pmem_write(u32 val, void *addr, u8 size)
-+{
-+	void *addr64 = (void *)((unsigned long)addr & ~0x7);
-+	unsigned long off = 8 - ((unsigned long)addr & 0x7) - size;
-+
-+	/*
-+	 * IMEM should  be loaded as a 64bit swapped value in a 64bit aligned
-+	 * location
-+	 */
-+	if (size == 4)
-+		writel(be32_to_cpu(val), addr64 + off);
-+	else
-+		writew(be16_to_cpu((u16)val), addr64 + off);
-+}
-+
-+/* Writes a buffer to UTIL program memory (DDR) from the host.
-+ *
-+ * @param[in] dst	Address to write (virtual, must be at least 16bit
-+ * aligned)
-+ * @param[in] src	Buffer to write (in PE endianness, i.e BE, must have
-+ * same alignment as dst)
-+ * @param[in] len	Number of bytes to write (must be at least 16bit
-+ * aligned)
-+ */
-+static void util_pmem_memcpy(void *dst, const void *src, unsigned int len)
-+{
-+	unsigned int len32;
-+	int i;
-+
-+	if ((unsigned long)src & 0x2) {
-+		util_pmem_write(*(u16 *)src, dst, 2);
-+		src += 2;
-+		dst += 2;
-+		len -= 2;
-+	}
-+
-+	len32 = len >> 2;
-+
-+	for (i = 0; i < len32; i++, dst += 4, src += 4)
-+		util_pmem_write(*(u32 *)src, dst, 4);
-+
-+	if (len & 0x2)
-+		util_pmem_write(*(u16 *)src, dst, len & 0x2);
-+}
-+#endif
-+
-+/* Loads an elf section into pmem
-+ * Code needs to be at least 16bit aligned and only PROGBITS sections are
-+ * supported
-+ *
-+ * @param[in] id	PE identification (CLASS0_ID, ..., TMU0_ID, ...,
-+ * TMU3_ID)
-+ * @param[in] data	pointer to the elf firmware
-+ * @param[in] shdr	pointer to the elf section header
-+ *
-+ */
-+static int pe_load_pmem_section(int id, const void *data,
-+				struct elf32_shdr *shdr)
-+{
-+	u32 offset = be32_to_cpu(shdr->sh_offset);
-+	u32 addr = be32_to_cpu(shdr->sh_addr);
-+	u32 size = be32_to_cpu(shdr->sh_size);
-+	u32 type = be32_to_cpu(shdr->sh_type);
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	if (id == UTIL_ID) {
-+		pr_err("%s: unsupported pmem section for UTIL\n",
-+		       __func__);
-+		return -EINVAL;
-+	}
-+#endif
-+
-+	if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) {
-+		pr_err(
-+			"%s: load address(%x) and elf file address(%lx) don't have the same alignment\n"
-+			, __func__, addr, (unsigned long)data + offset);
-+
-+		return -EINVAL;
-+	}
-+
-+	if (addr & 0x1) {
-+		pr_err("%s: load address(%x) is not 16bit aligned\n",
-+		       __func__, addr);
-+		return -EINVAL;
-+	}
-+
-+	if (size & 0x1) {
-+		pr_err("%s: load size(%x) is not 16bit aligned\n",
-+		       __func__, size);
-+		return -EINVAL;
-+	}
-+
-+	switch (type) {
-+	case SHT_PROGBITS:
-+		pe_pmem_memcpy_to32(id, addr, data + offset, size);
-+
-+		break;
-+
-+	default:
-+		pr_err("%s: unsupported section type(%x)\n", __func__,
-+		       type);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+/* Loads an elf section into dmem
-+ * Data needs to be at least 32bit aligned, NOBITS sections are correctly
-+ * initialized to 0
-+ *
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., UTIL_ID)
-+ * @param[in] data		pointer to the elf firmware
-+ * @param[in] shdr		pointer to the elf section header
-+ *
-+ */
-+static int pe_load_dmem_section(int id, const void *data,
-+				struct elf32_shdr *shdr)
-+{
-+	u32 offset = be32_to_cpu(shdr->sh_offset);
-+	u32 addr = be32_to_cpu(shdr->sh_addr);
-+	u32 size = be32_to_cpu(shdr->sh_size);
-+	u32 type = be32_to_cpu(shdr->sh_type);
-+	u32 size32 = size >> 2;
-+	int i;
-+
-+	if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) {
-+		pr_err(
-+			"%s: load address(%x) and elf file address(%lx) don't have the same alignment\n",
-+			__func__, addr, (unsigned long)data + offset);
-+
-+		return -EINVAL;
-+	}
-+
-+	if (addr & 0x3) {
-+		pr_err("%s: load address(%x) is not 32bit aligned\n",
-+		       __func__, addr);
-+		return -EINVAL;
-+	}
-+
-+	switch (type) {
-+	case SHT_PROGBITS:
-+		pe_dmem_memcpy_to32(id, addr, data + offset, size);
-+		break;
-+
-+	case SHT_NOBITS:
-+		for (i = 0; i < size32; i++, addr += 4)
-+			pe_dmem_write(id, 0, addr, 4);
-+
-+		if (size & 0x3)
-+			pe_dmem_write(id, 0, addr, size & 0x3);
-+
-+		break;
-+
-+	default:
-+		pr_err("%s: unsupported section type(%x)\n", __func__,
-+		       type);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+/* Loads an elf section into DDR
-+ * Data needs to be at least 32bit aligned, NOBITS sections are correctly
-+ * initialized to 0
-+ *
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., UTIL_ID)
-+ * @param[in] data		pointer to the elf firmware
-+ * @param[in] shdr		pointer to the elf section header
-+ *
-+ */
-+static int pe_load_ddr_section(int id, const void *data,
-+			       struct elf32_shdr *shdr,
-+			       struct device *dev) {
-+	u32 offset = be32_to_cpu(shdr->sh_offset);
-+	u32 addr = be32_to_cpu(shdr->sh_addr);
-+	u32 size = be32_to_cpu(shdr->sh_size);
-+	u32 type = be32_to_cpu(shdr->sh_type);
-+	u32 flags = be32_to_cpu(shdr->sh_flags);
-+
-+	switch (type) {
-+	case SHT_PROGBITS:
-+		if (flags & SHF_EXECINSTR) {
-+			if (id <= CLASS_MAX_ID) {
-+				/* DO the loading only once in DDR */
-+				if (id == CLASS0_ID) {
-+					pr_err(
-+						"%s: load address(%x) and elf file address(%lx) rcvd\n",
-+						__func__, addr,
-+						(unsigned long)data + offset);
-+					if (((unsigned long)(data + offset)
-+						& 0x3) != (addr & 0x3)) {
-+						pr_err(
-+							"%s: load address(%x) and elf file address(%lx) don't have the same alignment\n"
-+							, __func__, addr,
-+						(unsigned long)data + offset);
-+
-+						return -EINVAL;
-+					}
-+
-+					if (addr & 0x1) {
-+						pr_err(
-+							"%s: load address(%x) is not 16bit aligned\n"
-+							, __func__, addr);
-+						return -EINVAL;
-+					}
-+
-+					if (size & 0x1) {
-+						pr_err(
-+							"%s: load length(%x) is not 16bit aligned\n"
-+							, __func__, size);
-+						return -EINVAL;
-+					}
-+					memcpy(DDR_PHYS_TO_VIRT(
-+						DDR_PFE_TO_PHYS(addr)),
-+						data + offset, size);
-+				}
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+			} else if (id == UTIL_ID) {
-+				if (((unsigned long)(data + offset) & 0x3)
-+					!= (addr & 0x3)) {
-+					pr_err(
-+						"%s: load address(%x) and elf file address(%lx) don't have the same alignment\n"
-+						, __func__, addr,
-+						(unsigned long)data + offset);
-+
-+					return -EINVAL;
-+				}
-+
-+				if (addr & 0x1) {
-+					pr_err(
-+						"%s: load address(%x) is not 16bit aligned\n"
-+						, __func__, addr);
-+					return -EINVAL;
-+				}
-+
-+				if (size & 0x1) {
-+					pr_err(
-+						"%s: load length(%x) is not 16bit aligned\n"
-+						, __func__, size);
-+					return -EINVAL;
-+				}
-+
-+				util_pmem_memcpy(DDR_PHYS_TO_VIRT(
-+							DDR_PFE_TO_PHYS(addr)),
-+							data + offset, size);
-+			}
-+#endif
-+			} else {
-+				pr_err(
-+					"%s: unsupported ddr section type(%x) for PE(%d)\n"
-+						, __func__, type, id);
-+				return -EINVAL;
-+			}
-+
-+		} else {
-+			memcpy(DDR_PHYS_TO_VIRT(DDR_PFE_TO_PHYS(addr)), data
-+				+ offset, size);
-+		}
-+
-+		break;
-+
-+	case SHT_NOBITS:
-+		memset(DDR_PHYS_TO_VIRT(DDR_PFE_TO_PHYS(addr)), 0, size);
-+
-+		break;
-+
-+	default:
-+		pr_err("%s: unsupported section type(%x)\n", __func__,
-+		       type);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+/* Loads an elf section into pe lmem
-+ * Data needs to be at least 32bit aligned, NOBITS sections are correctly
-+ * initialized to 0
-+ *
-+ * @param[in] id		PE identification (CLASS0_ID,..., CLASS5_ID)
-+ * @param[in] data		pointer to the elf firmware
-+ * @param[in] shdr		pointer to the elf section header
-+ *
-+ */
-+static int pe_load_pe_lmem_section(int id, const void *data,
-+				   struct elf32_shdr *shdr)
-+{
-+	u32 offset = be32_to_cpu(shdr->sh_offset);
-+	u32 addr = be32_to_cpu(shdr->sh_addr);
-+	u32 size = be32_to_cpu(shdr->sh_size);
-+	u32 type = be32_to_cpu(shdr->sh_type);
-+
-+	if (id > CLASS_MAX_ID) {
-+		pr_err(
-+			"%s: unsupported pe-lmem section type(%x) for PE(%d)\n",
-+			 __func__, type, id);
-+		return -EINVAL;
-+	}
-+
-+	if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) {
-+		pr_err(
-+			"%s: load address(%x) and elf file address(%lx) don't have the same alignment\n",
-+			__func__, addr, (unsigned long)data + offset);
-+
-+		return -EINVAL;
-+	}
-+
-+	if (addr & 0x3) {
-+		pr_err("%s: load address(%x) is not 32bit aligned\n",
-+		       __func__, addr);
-+		return -EINVAL;
-+	}
-+
-+	switch (type) {
-+	case SHT_PROGBITS:
-+		class_pe_lmem_memcpy_to32(addr, data + offset, size);
-+		break;
-+
-+	case SHT_NOBITS:
-+		class_pe_lmem_memset(addr, 0, size);
-+		break;
-+
-+	default:
-+		pr_err("%s: unsupported section type(%x)\n", __func__,
-+		       type);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+/* Loads an elf section into a PE
-+ * For now only supports loading a section to dmem (all PE's), pmem (class and
-+ * tmu PE's),
-+ * DDDR (util PE code)
-+ *
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., UTIL_ID)
-+ * @param[in] data		pointer to the elf firmware
-+ * @param[in] shdr		pointer to the elf section header
-+ *
-+ */
-+int pe_load_elf_section(int id, const void *data, struct elf32_shdr *shdr,
-+			struct device *dev) {
-+	u32 addr = be32_to_cpu(shdr->sh_addr);
-+	u32 size = be32_to_cpu(shdr->sh_size);
-+
-+	if (IS_DMEM(addr, size))
-+		return pe_load_dmem_section(id, data, shdr);
-+	else if (IS_PMEM(addr, size))
-+		return pe_load_pmem_section(id, data, shdr);
-+	else if (IS_PFE_LMEM(addr, size))
-+		return 0;
-+	else if (IS_PHYS_DDR(addr, size))
-+		return pe_load_ddr_section(id, data, shdr, dev);
-+	else if (IS_PE_LMEM(addr, size))
-+		return pe_load_pe_lmem_section(id, data, shdr);
-+
-+	pr_err("%s: unsupported memory range(%x)\n", __func__,
-+	       addr);
-+	return 0;
-+}
-+
-+/**************************** BMU ***************************/
-+
-+/* Initializes a BMU block.
-+ * @param[in] base	BMU block base address
-+ * @param[in] cfg	BMU configuration
-+ */
-+void bmu_init(void *base, struct BMU_CFG *cfg)
-+{
-+	bmu_disable(base);
-+
-+	bmu_set_config(base, cfg);
-+
-+	bmu_reset(base);
-+}
-+
-+/* Resets a BMU block.
-+ * @param[in] base	BMU block base address
-+ */
-+void bmu_reset(void *base)
-+{
-+	writel(CORE_SW_RESET, base + BMU_CTRL);
-+
-+	/* Wait for self clear */
-+	while (readl(base + BMU_CTRL) & CORE_SW_RESET)
-+		;
-+}
-+
-+/* Enabled a BMU block.
-+ * @param[in] base	BMU block base address
-+ */
-+void bmu_enable(void *base)
-+{
-+	writel(CORE_ENABLE, base + BMU_CTRL);
-+}
-+
-+/* Disables a BMU block.
-+ * @param[in] base	BMU block base address
-+ */
-+void bmu_disable(void *base)
-+{
-+	writel(CORE_DISABLE, base + BMU_CTRL);
-+}
-+
-+/* Sets the configuration of a BMU block.
-+ * @param[in] base	BMU block base address
-+ * @param[in] cfg	BMU configuration
-+ */
-+void bmu_set_config(void *base, struct BMU_CFG *cfg)
-+{
-+	writel(cfg->baseaddr, base + BMU_UCAST_BASE_ADDR);
-+	writel(cfg->count & 0xffff, base + BMU_UCAST_CONFIG);
-+	writel(cfg->size & 0xffff, base + BMU_BUF_SIZE);
-+
-+	/* Interrupts are never used */
-+	writel(cfg->low_watermark, base + BMU_LOW_WATERMARK);
-+	writel(cfg->high_watermark, base + BMU_HIGH_WATERMARK);
-+	writel(0x0, base + BMU_INT_ENABLE);
-+}
-+
-+/**************************** MTIP GEMAC ***************************/
-+
-+/* Enable Rx Checksum Engine. With this enabled, Frame with bad IP,
-+ *   TCP or UDP checksums are discarded
-+ *
-+ * @param[in] base	GEMAC base address.
-+ */
-+void gemac_enable_rx_checksum_offload(void *base)
-+{
-+	/*Do not find configuration to do this */
-+}
-+
-+/* Disable Rx Checksum Engine.
-+ *
-+ * @param[in] base	GEMAC base address.
-+ */
-+void gemac_disable_rx_checksum_offload(void *base)
-+{
-+	/*Do not find configuration to do this */
-+}
-+
-+/* GEMAC set speed.
-+ * @param[in] base	GEMAC base address
-+ * @param[in] speed	GEMAC speed (10, 100 or 1000 Mbps)
-+ */
-+void gemac_set_speed(void *base, enum mac_speed gem_speed)
-+{
-+	u32 ecr = readl(base + EMAC_ECNTRL_REG) & ~EMAC_ECNTRL_SPEED;
-+	u32 rcr = readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_RMII_10T;
-+
-+	switch (gem_speed) {
-+	case SPEED_10M:
-+			rcr |= EMAC_RCNTRL_RMII_10T;
-+			break;
-+
-+	case SPEED_1000M:
-+			ecr |= EMAC_ECNTRL_SPEED;
-+			break;
-+
-+	case SPEED_100M:
-+	default:
-+			/*It is in 100M mode */
-+			break;
-+	}
-+	writel(ecr, (base + EMAC_ECNTRL_REG));
-+	writel(rcr, (base + EMAC_RCNTRL_REG));
-+}
-+
-+/* GEMAC set duplex.
-+ * @param[in] base	GEMAC base address
-+ * @param[in] duplex	GEMAC duplex mode (Full, Half)
-+ */
-+void gemac_set_duplex(void *base, int duplex)
-+{
-+	if (duplex == DUPLEX_HALF) {
-+		writel(readl(base + EMAC_TCNTRL_REG) & ~EMAC_TCNTRL_FDEN, base
-+			+ EMAC_TCNTRL_REG);
-+		writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_DRT, (base
-+			+ EMAC_RCNTRL_REG));
-+	} else{
-+		writel(readl(base + EMAC_TCNTRL_REG) | EMAC_TCNTRL_FDEN, base
-+			+ EMAC_TCNTRL_REG);
-+		writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_DRT, (base
-+			+ EMAC_RCNTRL_REG));
-+	}
-+}
-+
-+/* GEMAC set mode.
-+ * @param[in] base	GEMAC base address
-+ * @param[in] mode	GEMAC operation mode (MII, RMII, RGMII, SGMII)
-+ */
-+void gemac_set_mode(void *base, int mode)
-+{
-+	u32 val = readl(base + EMAC_RCNTRL_REG);
-+
-+	/*Remove loopbank*/
-+	val &= ~EMAC_RCNTRL_LOOP;
-+
-+	/*Enable flow control and MII mode*/
-+	val |= (EMAC_RCNTRL_FCE | EMAC_RCNTRL_MII_MODE);
-+
-+	writel(val, base + EMAC_RCNTRL_REG);
-+}
-+
-+/* GEMAC enable function.
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_enable(void *base)
-+{
-+	writel(readl(base + EMAC_ECNTRL_REG) | EMAC_ECNTRL_ETHER_EN, base +
-+		EMAC_ECNTRL_REG);
-+}
-+
-+/* GEMAC disable function.
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_disable(void *base)
-+{
-+	writel(readl(base + EMAC_ECNTRL_REG) & ~EMAC_ECNTRL_ETHER_EN, base +
-+		EMAC_ECNTRL_REG);
-+}
-+
-+/* GEMAC TX disable function.
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_tx_disable(void *base)
-+{
-+	writel(readl(base + EMAC_TCNTRL_REG) | EMAC_TCNTRL_GTS, base +
-+		EMAC_TCNTRL_REG);
-+}
-+
-+void gemac_tx_enable(void *base)
-+{
-+	writel(readl(base + EMAC_TCNTRL_REG) & ~EMAC_TCNTRL_GTS, base +
-+			EMAC_TCNTRL_REG);
-+}
-+
-+/* Sets the hash register of the MAC.
-+ * This register is used for matching unicast and multicast frames.
-+ *
-+ * @param[in] base	GEMAC base address.
-+ * @param[in] hash	64-bit hash to be configured.
-+ */
-+void gemac_set_hash(void *base, struct pfe_mac_addr *hash)
-+{
-+	writel(hash->bottom,  base + EMAC_GALR);
-+	writel(hash->top, base + EMAC_GAUR);
-+}
-+
-+void gemac_set_laddrN(void *base, struct pfe_mac_addr *address,
-+		      unsigned int entry_index)
-+{
-+	if ((entry_index < 1) || (entry_index > EMAC_SPEC_ADDR_MAX))
-+		return;
-+
-+	entry_index = entry_index - 1;
-+	if (entry_index < 1) {
-+		writel(htonl(address->bottom),  base + EMAC_PHY_ADDR_LOW);
-+		writel((htonl(address->top) | 0x8808), base +
-+			EMAC_PHY_ADDR_HIGH);
-+	} else {
-+		writel(htonl(address->bottom),  base + ((entry_index - 1) * 8)
-+			+ EMAC_SMAC_0_0);
-+		writel((htonl(address->top) | 0x8808), base + ((entry_index -
-+			1) * 8) + EMAC_SMAC_0_1);
-+	}
-+}
-+
-+void gemac_clear_laddrN(void *base, unsigned int entry_index)
-+{
-+	if ((entry_index < 1) || (entry_index > EMAC_SPEC_ADDR_MAX))
-+		return;
-+
-+	entry_index = entry_index - 1;
-+	if (entry_index < 1) {
-+		writel(0, base + EMAC_PHY_ADDR_LOW);
-+		writel(0, base + EMAC_PHY_ADDR_HIGH);
-+	} else {
-+		writel(0,  base + ((entry_index - 1) * 8) + EMAC_SMAC_0_0);
-+		writel(0, base + ((entry_index - 1) * 8) + EMAC_SMAC_0_1);
-+	}
-+}
-+
-+/* Set the loopback mode of the MAC.  This can be either no loopback for
-+ * normal operation, local loopback through MAC internal loopback module or PHY
-+ *   loopback for external loopback through a PHY.  This asserts the external
-+ * loop pin.
-+ *
-+ * @param[in] base	GEMAC base address.
-+ * @param[in] gem_loop	Loopback mode to be enabled. LB_LOCAL - MAC
-+ * Loopback,
-+ *			LB_EXT - PHY Loopback.
-+ */
-+void gemac_set_loop(void *base, enum mac_loop gem_loop)
-+{
-+	pr_info("%s()\n", __func__);
-+	writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_LOOP, (base +
-+		EMAC_RCNTRL_REG));
-+}
-+
-+/* GEMAC allow frames
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_enable_copy_all(void *base)
-+{
-+	writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_PROM, (base +
-+		EMAC_RCNTRL_REG));
-+}
-+
-+/* GEMAC do not allow frames
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_disable_copy_all(void *base)
-+{
-+	writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_PROM, (base +
-+		EMAC_RCNTRL_REG));
-+}
-+
-+/* GEMAC allow broadcast function.
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_allow_broadcast(void *base)
-+{
-+	writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_BC_REJ, base +
-+		EMAC_RCNTRL_REG);
-+}
-+
-+/* GEMAC no broadcast function.
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_no_broadcast(void *base)
-+{
-+	writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_BC_REJ, base +
-+		EMAC_RCNTRL_REG);
-+}
-+
-+/* GEMAC enable 1536 rx function.
-+ * @param[in]	base	GEMAC base address
-+ */
-+void gemac_enable_1536_rx(void *base)
-+{
-+	/* Set 1536 as Maximum frame length */
-+	writel(readl(base + EMAC_RCNTRL_REG) | (1536 << 16), base +
-+		EMAC_RCNTRL_REG);
-+}
-+
-+/* GEMAC enable jumbo function.
-+ * @param[in]	base	GEMAC base address
-+ */
-+void gemac_enable_rx_jmb(void *base)
-+{
-+	writel(readl(base + EMAC_RCNTRL_REG) | (JUMBO_FRAME_SIZE << 16), base
-+		+ EMAC_RCNTRL_REG);
-+}
-+
-+/* GEMAC enable stacked vlan function.
-+ * @param[in]	base	GEMAC base address
-+ */
-+void gemac_enable_stacked_vlan(void *base)
-+{
-+	/* MTIP doesn't support stacked vlan */
-+}
-+
-+/* GEMAC enable pause rx function.
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_enable_pause_rx(void *base)
-+{
-+	writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_FCE,
-+	       base + EMAC_RCNTRL_REG);
-+}
-+
-+/* GEMAC disable pause rx function.
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_disable_pause_rx(void *base)
-+{
-+	writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_FCE,
-+	       base + EMAC_RCNTRL_REG);
-+}
-+
-+/* GEMAC enable pause tx function.
-+ * @param[in] base GEMAC base address
-+ */
-+void gemac_enable_pause_tx(void *base)
-+{
-+	writel(EMAC_RX_SECTION_EMPTY_V, base + EMAC_RX_SECTION_EMPTY);
-+}
-+
-+/* GEMAC disable pause tx function.
-+ * @param[in] base GEMAC base address
-+ */
-+void gemac_disable_pause_tx(void *base)
-+{
-+	writel(0x0, base + EMAC_RX_SECTION_EMPTY);
-+}
-+
-+/* GEMAC wol configuration
-+ * @param[in] base	GEMAC base address
-+ * @param[in] wol_conf	WoL register configuration
-+ */
-+void gemac_set_wol(void *base, u32 wol_conf)
-+{
-+	u32  val = readl(base + EMAC_ECNTRL_REG);
-+
-+	if (wol_conf)
-+		val |= (EMAC_ECNTRL_MAGIC_ENA | EMAC_ECNTRL_SLEEP);
-+	else
-+		val &= ~(EMAC_ECNTRL_MAGIC_ENA | EMAC_ECNTRL_SLEEP);
-+	writel(val, base + EMAC_ECNTRL_REG);
-+}
-+
-+/* Sets Gemac bus width to 64bit
-+ * @param[in] base       GEMAC base address
-+ * @param[in] width     gemac bus width to be set possible values are 32/64/128
-+ */
-+void gemac_set_bus_width(void *base, int width)
-+{
-+}
-+
-+/* Sets Gemac configuration.
-+ * @param[in] base	GEMAC base address
-+ * @param[in] cfg	GEMAC configuration
-+ */
-+void gemac_set_config(void *base, struct gemac_cfg *cfg)
-+{
-+	/*GEMAC config taken from VLSI */
-+	writel(0x00000004, base + EMAC_TFWR_STR_FWD);
-+	writel(0x00000005, base + EMAC_RX_SECTION_FULL);
-+	writel(0x00003fff, base + EMAC_TRUNC_FL);
-+	writel(0x00000030, base + EMAC_TX_SECTION_EMPTY);
-+	writel(0x00000000, base + EMAC_MIB_CTRL_STS_REG);
-+
-+	gemac_set_mode(base, cfg->mode);
-+
-+	gemac_set_speed(base, cfg->speed);
-+
-+	gemac_set_duplex(base, cfg->duplex);
-+}
-+
-+/**************************** GPI ***************************/
-+
-+/* Initializes a GPI block.
-+ * @param[in] base	GPI base address
-+ * @param[in] cfg	GPI configuration
-+ */
-+void gpi_init(void *base, struct gpi_cfg *cfg)
-+{
-+	gpi_reset(base);
-+
-+	gpi_disable(base);
-+
-+	gpi_set_config(base, cfg);
-+}
-+
-+/* Resets a GPI block.
-+ * @param[in] base	GPI base address
-+ */
-+void gpi_reset(void *base)
-+{
-+	writel(CORE_SW_RESET, base + GPI_CTRL);
-+}
-+
-+/* Enables a GPI block.
-+ * @param[in] base	GPI base address
-+ */
-+void gpi_enable(void *base)
-+{
-+	writel(CORE_ENABLE, base + GPI_CTRL);
-+}
-+
-+/* Disables a GPI block.
-+ * @param[in] base	GPI base address
-+ */
-+void gpi_disable(void *base)
-+{
-+	writel(CORE_DISABLE, base + GPI_CTRL);
-+}
-+
-+/* Sets the configuration of a GPI block.
-+ * @param[in] base	GPI base address
-+ * @param[in] cfg	GPI configuration
-+ */
-+void gpi_set_config(void *base, struct gpi_cfg *cfg)
-+{
-+	writel(CBUS_VIRT_TO_PFE(BMU1_BASE_ADDR + BMU_ALLOC_CTRL),	base
-+		+ GPI_LMEM_ALLOC_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(BMU1_BASE_ADDR + BMU_FREE_CTRL),	base
-+		+ GPI_LMEM_FREE_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_ALLOC_CTRL),	base
-+		+ GPI_DDR_ALLOC_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_FREE_CTRL),	base
-+		+ GPI_DDR_FREE_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(CLASS_INQ_PKTPTR), base + GPI_CLASS_ADDR);
-+	writel(DDR_HDR_SIZE, base + GPI_DDR_DATA_OFFSET);
-+	writel(LMEM_HDR_SIZE, base + GPI_LMEM_DATA_OFFSET);
-+	writel(0, base + GPI_LMEM_SEC_BUF_DATA_OFFSET);
-+	writel(0, base + GPI_DDR_SEC_BUF_DATA_OFFSET);
-+	writel((DDR_HDR_SIZE << 16) |	LMEM_HDR_SIZE,	base + GPI_HDR_SIZE);
-+	writel((DDR_BUF_SIZE << 16) |	LMEM_BUF_SIZE,	base + GPI_BUF_SIZE);
-+
-+	writel(((cfg->lmem_rtry_cnt << 16) | (GPI_DDR_BUF_EN << 1) |
-+		GPI_LMEM_BUF_EN), base + GPI_RX_CONFIG);
-+	writel(cfg->tmlf_txthres, base + GPI_TMLF_TX);
-+	writel(cfg->aseq_len,	base + GPI_DTX_ASEQ);
-+	writel(1, base + GPI_TOE_CHKSUM_EN);
-+
-+	if (cfg->mtip_pause_reg) {
-+		writel(cfg->mtip_pause_reg, base + GPI_CSR_MTIP_PAUSE_REG);
-+		writel(EGPI_PAUSE_TIME, base + GPI_TX_PAUSE_TIME);
-+	}
-+}
-+
-+/**************************** CLASSIFIER ***************************/
-+
-+/* Initializes CLASSIFIER block.
-+ * @param[in] cfg	CLASSIFIER configuration
-+ */
-+void class_init(struct class_cfg *cfg)
-+{
-+	class_reset();
-+
-+	class_disable();
-+
-+	class_set_config(cfg);
-+}
-+
-+/* Resets CLASSIFIER block.
-+ *
-+ */
-+void class_reset(void)
-+{
-+	writel(CORE_SW_RESET, CLASS_TX_CTRL);
-+}
-+
-+/* Enables all CLASS-PE's cores.
-+ *
-+ */
-+void class_enable(void)
-+{
-+	writel(CORE_ENABLE, CLASS_TX_CTRL);
-+}
-+
-+/* Disables all CLASS-PE's cores.
-+ *
-+ */
-+void class_disable(void)
-+{
-+	writel(CORE_DISABLE, CLASS_TX_CTRL);
-+}
-+
-+/*
-+ * Sets the configuration of the CLASSIFIER block.
-+ * @param[in] cfg	CLASSIFIER configuration
-+ */
-+void class_set_config(struct class_cfg *cfg)
-+{
-+	u32 val;
-+
-+	/* Initialize route table */
-+	if (!cfg->resume)
-+		memset(DDR_PHYS_TO_VIRT(cfg->route_table_baseaddr), 0, (1 <<
-+		cfg->route_table_hash_bits) * CLASS_ROUTE_SIZE);
-+
-+#if !defined(LS1012A_PFE_RESET_WA)
-+	writel(cfg->pe_sys_clk_ratio,	CLASS_PE_SYS_CLK_RATIO);
-+#endif
-+
-+	writel((DDR_HDR_SIZE << 16) | LMEM_HDR_SIZE,	CLASS_HDR_SIZE);
-+	writel(LMEM_BUF_SIZE,				CLASS_LMEM_BUF_SIZE);
-+	writel(CLASS_ROUTE_ENTRY_SIZE(CLASS_ROUTE_SIZE) |
-+		CLASS_ROUTE_HASH_SIZE(cfg->route_table_hash_bits),
-+		CLASS_ROUTE_HASH_ENTRY_SIZE);
-+	writel(HIF_PKT_CLASS_EN | HIF_PKT_OFFSET(sizeof(struct hif_hdr)),
-+	       CLASS_HIF_PARSE);
-+
-+	val = HASH_CRC_PORT_IP | QB2BUS_LE;
-+
-+#if defined(CONFIG_IP_ALIGNED)
-+	val |= IP_ALIGNED;
-+#endif
-+
-+	/*
-+	 *  Class PE packet steering will only work if TOE mode, bridge fetch or
-+	 * route fetch are enabled (see class/qb_fet.v). Route fetch would
-+	 * trigger additional memory copies (likely from DDR because of hash
-+	 * table size, which cannot be reduced because PE software still
-+	 * relies on hash value computed in HW), so when not in TOE mode we
-+	 * simply enable HW bridge fetch even though we don't use it.
-+	 */
-+	if (cfg->toe_mode)
-+		val |= CLASS_TOE;
-+	else
-+		val |= HW_BRIDGE_FETCH;
-+
-+	writel(val, CLASS_ROUTE_MULTI);
-+
-+	writel(DDR_PHYS_TO_PFE(cfg->route_table_baseaddr),
-+	       CLASS_ROUTE_TABLE_BASE);
-+	writel(CLASS_PE0_RO_DM_ADDR0_VAL,		CLASS_PE0_RO_DM_ADDR0);
-+	writel(CLASS_PE0_RO_DM_ADDR1_VAL,		CLASS_PE0_RO_DM_ADDR1);
-+	writel(CLASS_PE0_QB_DM_ADDR0_VAL,		CLASS_PE0_QB_DM_ADDR0);
-+	writel(CLASS_PE0_QB_DM_ADDR1_VAL,		CLASS_PE0_QB_DM_ADDR1);
-+	writel(CBUS_VIRT_TO_PFE(TMU_PHY_INQ_PKTPTR),	CLASS_TM_INQ_ADDR);
-+
-+	writel(23, CLASS_AFULL_THRES);
-+	writel(23, CLASS_TSQ_FIFO_THRES);
-+
-+	writel(24, CLASS_MAX_BUF_CNT);
-+	writel(24, CLASS_TSQ_MAX_CNT);
-+}
-+
-+/**************************** TMU ***************************/
-+
-+void tmu_reset(void)
-+{
-+	writel(SW_RESET, TMU_CTRL);
-+}
-+
-+/* Initializes TMU block.
-+ * @param[in] cfg	TMU configuration
-+ */
-+void tmu_init(struct tmu_cfg *cfg)
-+{
-+	int q, phyno;
-+
-+	tmu_disable(0xF);
-+	mdelay(10);
-+
-+#if !defined(LS1012A_PFE_RESET_WA)
-+	/* keep in soft reset */
-+	writel(SW_RESET, TMU_CTRL);
-+#endif
-+	writel(0x3, TMU_SYS_GENERIC_CONTROL);
-+	writel(750, TMU_INQ_WATERMARK);
-+	writel(CBUS_VIRT_TO_PFE(EGPI1_BASE_ADDR +
-+		GPI_INQ_PKTPTR),	TMU_PHY0_INQ_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(EGPI2_BASE_ADDR +
-+		GPI_INQ_PKTPTR),	TMU_PHY1_INQ_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(HGPI_BASE_ADDR +
-+		GPI_INQ_PKTPTR),	TMU_PHY3_INQ_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(HIF_NOCPY_RX_INQ0_PKTPTR), TMU_PHY4_INQ_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(UTIL_INQ_PKTPTR), TMU_PHY5_INQ_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_FREE_CTRL),
-+	       TMU_BMU_INQ_ADDR);
-+
-+	writel(0x3FF,	TMU_TDQ0_SCH_CTRL);	/*
-+						 * enabling all 10
-+						 * schedulers [9:0] of each TDQ
-+						 */
-+	writel(0x3FF,	TMU_TDQ1_SCH_CTRL);
-+	writel(0x3FF,	TMU_TDQ3_SCH_CTRL);
-+
-+#if !defined(LS1012A_PFE_RESET_WA)
-+	writel(cfg->pe_sys_clk_ratio,	TMU_PE_SYS_CLK_RATIO);
-+#endif
-+
-+#if !defined(LS1012A_PFE_RESET_WA)
-+	writel(DDR_PHYS_TO_PFE(cfg->llm_base_addr),	TMU_LLM_BASE_ADDR);
-+	/* Extra packet pointers will be stored from this address onwards */
-+
-+	writel(cfg->llm_queue_len,	TMU_LLM_QUE_LEN);
-+	writel(5,			TMU_TDQ_IIFG_CFG);
-+	writel(DDR_BUF_SIZE,		TMU_BMU_BUF_SIZE);
-+
-+	writel(0x0,			TMU_CTRL);
-+
-+	/* MEM init */
-+	pr_info("%s: mem init\n", __func__);
-+	writel(MEM_INIT,	TMU_CTRL);
-+
-+	while (!(readl(TMU_CTRL) & MEM_INIT_DONE))
-+		;
-+
-+	/* LLM init */
-+	pr_info("%s: lmem init\n", __func__);
-+	writel(LLM_INIT,	TMU_CTRL);
-+
-+	while (!(readl(TMU_CTRL) & LLM_INIT_DONE))
-+		;
-+#endif
-+	/* set up each queue for tail drop */
-+	for (phyno = 0; phyno < 4; phyno++) {
-+		if (phyno == 2)
-+			continue;
-+		for (q = 0; q < 16; q++) {
-+			u32 qdepth;
-+
-+			writel((phyno << 8) | q, TMU_TEQ_CTRL);
-+			writel(1 << 22, TMU_TEQ_QCFG); /*Enable tail drop */
-+
-+			if (phyno == 3)
-+				qdepth = DEFAULT_TMU3_QDEPTH;
-+			else
-+				qdepth = (q == 0) ? DEFAULT_Q0_QDEPTH :
-+						DEFAULT_MAX_QDEPTH;
-+
-+			/* LOG: 68855 */
-+			/*
-+			 * The following is a workaround for the reordered
-+			 * packet and BMU2 buffer leakage issue.
-+			 */
-+			if (CHIP_REVISION() == 0)
-+				qdepth = 31;
-+
-+			writel(qdepth << 18, TMU_TEQ_HW_PROB_CFG2);
-+			writel(qdepth >> 14, TMU_TEQ_HW_PROB_CFG3);
-+		}
-+	}
-+
-+#ifdef CFG_LRO
-+	/* Set TMU-3 queue 5 (LRO) in no-drop mode */
-+	writel((3 << 8) | TMU_QUEUE_LRO, TMU_TEQ_CTRL);
-+	writel(0, TMU_TEQ_QCFG);
-+#endif
-+
-+	writel(0x05, TMU_TEQ_DISABLE_DROPCHK);
-+
-+	writel(0x0, TMU_CTRL);
-+}
-+
-+/* Enables TMU-PE cores.
-+ * @param[in] pe_mask	TMU PE mask
-+ */
-+void tmu_enable(u32 pe_mask)
-+{
-+	writel(readl(TMU_TX_CTRL) | (pe_mask & 0xF), TMU_TX_CTRL);
-+}
-+
-+/* Disables TMU cores.
-+ * @param[in] pe_mask	TMU PE mask
-+ */
-+void tmu_disable(u32 pe_mask)
-+{
-+	writel(readl(TMU_TX_CTRL) & ~(pe_mask & 0xF), TMU_TX_CTRL);
-+}
-+
-+/* This will return the tmu queue status
-+ * @param[in] if_id	gem interface id or TMU index
-+ * @return		returns the bit mask of busy queues, zero means all
-+ * queues are empty
-+ */
-+u32 tmu_qstatus(u32 if_id)
-+{
-+	return cpu_to_be32(pe_dmem_read(TMU0_ID + if_id, TMU_DM_PESTATUS +
-+		offsetof(struct pe_status, tmu_qstatus), 4));
-+}
-+
-+u32 tmu_pkts_processed(u32 if_id)
-+{
-+	return cpu_to_be32(pe_dmem_read(TMU0_ID + if_id, TMU_DM_PESTATUS +
-+		offsetof(struct pe_status, rx), 4));
-+}
-+
-+/**************************** UTIL ***************************/
-+
-+/* Resets UTIL block.
-+ */
-+void util_reset(void)
-+{
-+	writel(CORE_SW_RESET, UTIL_TX_CTRL);
-+}
-+
-+/* Initializes UTIL block.
-+ * @param[in] cfg	UTIL configuration
-+ */
-+void util_init(struct util_cfg *cfg)
-+{
-+	writel(cfg->pe_sys_clk_ratio,   UTIL_PE_SYS_CLK_RATIO);
-+}
-+
-+/* Enables UTIL-PE core.
-+ *
-+ */
-+void util_enable(void)
-+{
-+	writel(CORE_ENABLE, UTIL_TX_CTRL);
-+}
-+
-+/* Disables UTIL-PE core.
-+ *
-+ */
-+void util_disable(void)
-+{
-+	writel(CORE_DISABLE, UTIL_TX_CTRL);
-+}
-+
-+/**************************** HIF ***************************/
-+/* Initializes HIF copy block.
-+ *
-+ */
-+void hif_init(void)
-+{
-+	/*Initialize HIF registers*/
-+	writel((HIF_RX_POLL_CTRL_CYCLE << 16) | HIF_TX_POLL_CTRL_CYCLE,
-+	       HIF_POLL_CTRL);
-+}
-+
-+/* Enable hif tx DMA and interrupt
-+ *
-+ */
-+void hif_tx_enable(void)
-+{
-+	writel(HIF_CTRL_DMA_EN, HIF_TX_CTRL);
-+	writel((readl(HIF_INT_ENABLE) | HIF_INT_EN | HIF_TXPKT_INT_EN),
-+	       HIF_INT_ENABLE);
-+}
-+
-+/* Disable hif tx DMA and interrupt
-+ *
-+ */
-+void hif_tx_disable(void)
-+{
-+	u32	hif_int;
-+
-+	writel(0, HIF_TX_CTRL);
-+
-+	hif_int = readl(HIF_INT_ENABLE);
-+	hif_int &= HIF_TXPKT_INT_EN;
-+	writel(hif_int, HIF_INT_ENABLE);
-+}
-+
-+/* Enable hif rx DMA and interrupt
-+ *
-+ */
-+void hif_rx_enable(void)
-+{
-+	hif_rx_dma_start();
-+	writel((readl(HIF_INT_ENABLE) | HIF_INT_EN | HIF_RXPKT_INT_EN),
-+	       HIF_INT_ENABLE);
-+}
-+
-+/* Disable hif rx DMA and interrupt
-+ *
-+ */
-+void hif_rx_disable(void)
-+{
-+	u32	hif_int;
-+
-+	writel(0, HIF_RX_CTRL);
-+
-+	hif_int = readl(HIF_INT_ENABLE);
-+	hif_int &= HIF_RXPKT_INT_EN;
-+	writel(hif_int, HIF_INT_ENABLE);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_hif.c
-@@ -0,0 +1,1094 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/interrupt.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/sched.h>
-+#include <linux/module.h>
-+#include <linux/list.h>
-+#include <linux/kthread.h>
-+#include <linux/slab.h>
-+
-+#include <linux/io.h>
-+#include <asm/irq.h>
-+
-+#include "pfe_mod.h"
-+
-+#define HIF_INT_MASK	(HIF_INT | HIF_RXPKT_INT | HIF_TXPKT_INT)
-+
-+unsigned char napi_first_batch;
-+
-+static void pfe_tx_do_cleanup(unsigned long data);
-+
-+static int pfe_hif_alloc_descr(struct pfe_hif *hif)
-+{
-+	void *addr;
-+	dma_addr_t dma_addr;
-+	int err = 0;
-+
-+	pr_info("%s\n", __func__);
-+	addr = dma_alloc_coherent(pfe->dev,
-+				  HIF_RX_DESC_NT * sizeof(struct hif_desc) +
-+				  HIF_TX_DESC_NT * sizeof(struct hif_desc),
-+				  &dma_addr, GFP_KERNEL);
-+
-+	if (!addr) {
-+		pr_err("%s: Could not allocate buffer descriptors!\n"
-+			, __func__);
-+		err = -ENOMEM;
-+		goto err0;
-+	}
-+
-+	hif->descr_baseaddr_p = dma_addr;
-+	hif->descr_baseaddr_v = addr;
-+	hif->rx_ring_size = HIF_RX_DESC_NT;
-+	hif->tx_ring_size = HIF_TX_DESC_NT;
-+
-+	return 0;
-+
-+err0:
-+	return err;
-+}
-+
-+#if defined(LS1012A_PFE_RESET_WA)
-+static void pfe_hif_disable_rx_desc(struct pfe_hif *hif)
-+{
-+	int ii;
-+	struct hif_desc	*desc = hif->rx_base;
-+
-+	/*Mark all descriptors as LAST_BD */
-+	for (ii = 0; ii < hif->rx_ring_size; ii++) {
-+		desc->ctrl |= BD_CTRL_LAST_BD;
-+		desc++;
-+	}
-+}
-+
-+struct class_rx_hdr_t {
-+	u32     next_ptr;       /* ptr to the start of the first DDR buffer */
-+	u16     length;         /* total packet length */
-+	u16     phyno;          /* input physical port number */
-+	u32     status;         /* gemac status bits */
-+	u32     status2;            /* reserved for software usage */
-+};
-+
-+/* STATUS_BAD_FRAME_ERR is set for all errors (including checksums if enabled)
-+ * except overflow
-+ */
-+#define STATUS_BAD_FRAME_ERR            BIT(16)
-+#define STATUS_LENGTH_ERR               BIT(17)
-+#define STATUS_CRC_ERR                  BIT(18)
-+#define STATUS_TOO_SHORT_ERR            BIT(19)
-+#define STATUS_TOO_LONG_ERR             BIT(20)
-+#define STATUS_CODE_ERR                 BIT(21)
-+#define STATUS_MC_HASH_MATCH            BIT(22)
-+#define STATUS_CUMULATIVE_ARC_HIT       BIT(23)
-+#define STATUS_UNICAST_HASH_MATCH       BIT(24)
-+#define STATUS_IP_CHECKSUM_CORRECT      BIT(25)
-+#define STATUS_TCP_CHECKSUM_CORRECT     BIT(26)
-+#define STATUS_UDP_CHECKSUM_CORRECT     BIT(27)
-+#define STATUS_OVERFLOW_ERR             BIT(28) /* GPI error */
-+#define MIN_PKT_SIZE			64
-+
-+static inline void copy_to_lmem(u32 *dst, u32 *src, int len)
-+{
-+	int i;
-+
-+	for (i = 0; i < len; i += sizeof(u32))	{
-+		*dst = htonl(*src);
-+		dst++; src++;
-+	}
-+}
-+
-+static void send_dummy_pkt_to_hif(void)
-+{
-+	void *lmem_ptr, *ddr_ptr, *lmem_virt_addr;
-+	u32 physaddr;
-+	struct class_rx_hdr_t local_hdr;
-+	static u32 dummy_pkt[] =  {
-+		0x33221100, 0x2b785544, 0xd73093cb, 0x01000608,
-+		0x04060008, 0x2b780200, 0xd73093cb, 0x0a01a8c0,
-+		0x33221100, 0xa8c05544, 0x00000301, 0x00000000,
-+		0x00000000, 0x00000000, 0x00000000, 0xbe86c51f };
-+
-+	ddr_ptr = (void *)((u64)readl(BMU2_BASE_ADDR + BMU_ALLOC_CTRL));
-+	if (!ddr_ptr)
-+		return;
-+
-+	lmem_ptr = (void *)((u64)readl(BMU1_BASE_ADDR + BMU_ALLOC_CTRL));
-+	if (!lmem_ptr)
-+		return;
-+
-+	pr_info("Sending a dummy pkt to HIF %p %p\n", ddr_ptr, lmem_ptr);
-+	physaddr = (u32)DDR_VIRT_TO_PFE(ddr_ptr);
-+
-+	lmem_virt_addr = (void *)CBUS_PFE_TO_VIRT((unsigned long int)lmem_ptr);
-+
-+	local_hdr.phyno = htons(0); /* RX_PHY_0 */
-+	local_hdr.length = htons(MIN_PKT_SIZE);
-+
-+	local_hdr.next_ptr = htonl((u32)physaddr);
-+	/*Mark checksum is correct */
-+	local_hdr.status = htonl((STATUS_IP_CHECKSUM_CORRECT |
-+				STATUS_UDP_CHECKSUM_CORRECT |
-+				STATUS_TCP_CHECKSUM_CORRECT |
-+				STATUS_UNICAST_HASH_MATCH |
-+				STATUS_CUMULATIVE_ARC_HIT));
-+	copy_to_lmem((u32 *)lmem_virt_addr, (u32 *)&local_hdr,
-+		     sizeof(local_hdr));
-+
-+	copy_to_lmem((u32 *)(lmem_virt_addr + LMEM_HDR_SIZE), (u32 *)dummy_pkt,
-+		     0x40);
-+
-+	writel((unsigned long int)lmem_ptr, CLASS_INQ_PKTPTR);
-+}
-+
-+void pfe_hif_rx_idle(struct pfe_hif *hif)
-+{
-+	int hif_stop_loop = 10;
-+	u32 rx_status;
-+
-+	pfe_hif_disable_rx_desc(hif);
-+	pr_info("Bringing hif to idle state...");
-+	writel(0, HIF_INT_ENABLE);
-+	/*If HIF Rx BDP is busy send a dummy packet */
-+	do {
-+		rx_status = readl(HIF_RX_STATUS);
-+		if (rx_status & BDP_CSR_RX_DMA_ACTV)
-+			send_dummy_pkt_to_hif();
-+
-+		usleep_range(100, 150);
-+	} while (--hif_stop_loop);
-+
-+	if (readl(HIF_RX_STATUS) & BDP_CSR_RX_DMA_ACTV)
-+		pr_info("Failed\n");
-+	else
-+		pr_info("Done\n");
-+}
-+#endif
-+
-+static void pfe_hif_free_descr(struct pfe_hif *hif)
-+{
-+	pr_info("%s\n", __func__);
-+
-+	dma_free_coherent(pfe->dev,
-+			  hif->rx_ring_size * sizeof(struct hif_desc) +
-+			  hif->tx_ring_size * sizeof(struct hif_desc),
-+			  hif->descr_baseaddr_v, hif->descr_baseaddr_p);
-+}
-+
-+void pfe_hif_desc_dump(struct pfe_hif *hif)
-+{
-+	struct hif_desc	*desc;
-+	unsigned long desc_p;
-+	int ii = 0;
-+
-+	pr_info("%s\n", __func__);
-+
-+	desc = hif->rx_base;
-+	desc_p = (u32)((u64)desc - (u64)hif->descr_baseaddr_v +
-+			hif->descr_baseaddr_p);
-+
-+	pr_info("HIF Rx desc base %p physical %x\n", desc, (u32)desc_p);
-+	for (ii = 0; ii < hif->rx_ring_size; ii++) {
-+		pr_info("status: %08x, ctrl: %08x, data: %08x, next: %x\n",
-+			readl(&desc->status), readl(&desc->ctrl),
-+			readl(&desc->data), readl(&desc->next));
-+			desc++;
-+	}
-+
-+	desc = hif->tx_base;
-+	desc_p = ((u64)desc - (u64)hif->descr_baseaddr_v +
-+			hif->descr_baseaddr_p);
-+
-+	pr_info("HIF Tx desc base %p physical %x\n", desc, (u32)desc_p);
-+	for (ii = 0; ii < hif->tx_ring_size; ii++) {
-+		pr_info("status: %08x, ctrl: %08x, data: %08x, next: %x\n",
-+			readl(&desc->status), readl(&desc->ctrl),
-+			readl(&desc->data), readl(&desc->next));
-+		desc++;
-+	}
-+}
-+
-+/* pfe_hif_release_buffers */
-+static void pfe_hif_release_buffers(struct pfe_hif *hif)
-+{
-+	struct hif_desc	*desc;
-+	int i = 0;
-+
-+	hif->rx_base = hif->descr_baseaddr_v;
-+
-+	pr_info("%s\n", __func__);
-+
-+	/*Free Rx buffers */
-+	desc = hif->rx_base;
-+	for (i = 0; i < hif->rx_ring_size; i++) {
-+		if (readl(&desc->data)) {
-+			if ((i < hif->shm->rx_buf_pool_cnt) &&
-+			    (!hif->shm->rx_buf_pool[i])) {
-+				/*
-+				 * dma_unmap_single(hif->dev, desc->data,
-+				 * hif->rx_buf_len[i], DMA_FROM_DEVICE);
-+				 */
-+				dma_unmap_single(hif->dev,
-+						 DDR_PFE_TO_PHYS(
-+						 readl(&desc->data)),
-+						 hif->rx_buf_len[i],
-+						 DMA_FROM_DEVICE);
-+				hif->shm->rx_buf_pool[i] = hif->rx_buf_addr[i];
-+			} else {
-+				pr_err("%s: buffer pool already full\n"
-+					, __func__);
-+			}
-+		}
-+
-+		writel(0, &desc->data);
-+		writel(0, &desc->status);
-+		writel(0, &desc->ctrl);
-+		desc++;
-+	}
-+}
-+
-+/*
-+ * pfe_hif_init_buffers
-+ * This function initializes the HIF Rx/Tx ring descriptors and
-+ * initialize Rx queue with buffers.
-+ */
-+static int pfe_hif_init_buffers(struct pfe_hif *hif)
-+{
-+	struct hif_desc	*desc, *first_desc_p;
-+	u32 data;
-+	int i = 0;
-+
-+	pr_info("%s\n", __func__);
-+
-+	/* Check enough Rx buffers available in the shared memory */
-+	if (hif->shm->rx_buf_pool_cnt < hif->rx_ring_size)
-+		return -ENOMEM;
-+
-+	hif->rx_base = hif->descr_baseaddr_v;
-+	memset(hif->rx_base, 0, hif->rx_ring_size * sizeof(struct hif_desc));
-+
-+	/*Initialize Rx descriptors */
-+	desc = hif->rx_base;
-+	first_desc_p = (struct hif_desc *)hif->descr_baseaddr_p;
-+
-+	for (i = 0; i < hif->rx_ring_size; i++) {
-+		/* Initialize Rx buffers from the shared memory */
-+
-+		data = (u32)dma_map_single(hif->dev, hif->shm->rx_buf_pool[i],
-+				pfe_pkt_size, DMA_FROM_DEVICE);
-+		hif->rx_buf_addr[i] = hif->shm->rx_buf_pool[i];
-+		hif->rx_buf_len[i] = pfe_pkt_size;
-+		hif->shm->rx_buf_pool[i] = NULL;
-+
-+		if (likely(dma_mapping_error(hif->dev, data) == 0)) {
-+			writel(DDR_PHYS_TO_PFE(data), &desc->data);
-+		} else {
-+			pr_err("%s : low on mem\n",  __func__);
-+
-+			goto err;
-+		}
-+
-+		writel(0, &desc->status);
-+
-+		/*
-+		 * Ensure everything else is written to DDR before
-+		 * writing bd->ctrl
-+		 */
-+		wmb();
-+
-+		writel((BD_CTRL_PKT_INT_EN | BD_CTRL_LIFM
-+			| BD_CTRL_DIR | BD_CTRL_DESC_EN
-+			| BD_BUF_LEN(pfe_pkt_size)), &desc->ctrl);
-+
-+		/* Chain descriptors */
-+		writel((u32)DDR_PHYS_TO_PFE(first_desc_p + i + 1), &desc->next);
-+		desc++;
-+	}
-+
-+	/* Overwrite last descriptor to chain it to first one*/
-+	desc--;
-+	writel((u32)DDR_PHYS_TO_PFE(first_desc_p), &desc->next);
-+
-+	hif->rxtoclean_index = 0;
-+
-+	/*Initialize Rx buffer descriptor ring base address */
-+	writel(DDR_PHYS_TO_PFE(hif->descr_baseaddr_p), HIF_RX_BDP_ADDR);
-+
-+	hif->tx_base = hif->rx_base + hif->rx_ring_size;
-+	first_desc_p = (struct hif_desc *)hif->descr_baseaddr_p +
-+				hif->rx_ring_size;
-+	memset(hif->tx_base, 0, hif->tx_ring_size * sizeof(struct hif_desc));
-+
-+	/*Initialize tx descriptors */
-+	desc = hif->tx_base;
-+
-+	for (i = 0; i < hif->tx_ring_size; i++) {
-+		/* Chain descriptors */
-+		writel((u32)DDR_PHYS_TO_PFE(first_desc_p + i + 1), &desc->next);
-+		writel(0, &desc->ctrl);
-+		desc++;
-+	}
-+
-+	/* Overwrite last descriptor to chain it to first one */
-+	desc--;
-+	writel((u32)DDR_PHYS_TO_PFE(first_desc_p), &desc->next);
-+	hif->txavail = hif->tx_ring_size;
-+	hif->txtosend = 0;
-+	hif->txtoclean = 0;
-+	hif->txtoflush = 0;
-+
-+	/*Initialize Tx buffer descriptor ring base address */
-+	writel((u32)DDR_PHYS_TO_PFE(first_desc_p), HIF_TX_BDP_ADDR);
-+
-+	return 0;
-+
-+err:
-+	pfe_hif_release_buffers(hif);
-+	return -ENOMEM;
-+}
-+
-+/*
-+ * pfe_hif_client_register
-+ *
-+ * This function used to register a client driver with the HIF driver.
-+ *
-+ * Return value:
-+ * 0 - on Successful registration
-+ */
-+static int pfe_hif_client_register(struct pfe_hif *hif, u32 client_id,
-+				   struct hif_client_shm *client_shm)
-+{
-+	struct hif_client *client = &hif->client[client_id];
-+	u32 i, cnt;
-+	struct rx_queue_desc *rx_qbase;
-+	struct tx_queue_desc *tx_qbase;
-+	struct hif_rx_queue *rx_queue;
-+	struct hif_tx_queue *tx_queue;
-+	int err = 0;
-+
-+	pr_info("%s\n", __func__);
-+
-+	spin_lock_bh(&hif->tx_lock);
-+
-+	if (test_bit(client_id, &hif->shm->g_client_status[0])) {
-+		pr_err("%s: client %d already registered\n",
-+		       __func__, client_id);
-+		err = -1;
-+		goto unlock;
-+	}
-+
-+	memset(client, 0, sizeof(struct hif_client));
-+
-+	/* Initialize client Rx queues baseaddr, size */
-+
-+	cnt = CLIENT_CTRL_RX_Q_CNT(client_shm->ctrl);
-+	/* Check if client is requesting for more queues than supported */
-+	if (cnt > HIF_CLIENT_QUEUES_MAX)
-+		cnt = HIF_CLIENT_QUEUES_MAX;
-+
-+	client->rx_qn = cnt;
-+	rx_qbase = (struct rx_queue_desc *)client_shm->rx_qbase;
-+	for (i = 0; i < cnt; i++) {
-+		rx_queue = &client->rx_q[i];
-+		rx_queue->base = rx_qbase + i * client_shm->rx_qsize;
-+		rx_queue->size = client_shm->rx_qsize;
-+		rx_queue->write_idx = 0;
-+	}
-+
-+	/* Initialize client Tx queues baseaddr, size */
-+	cnt = CLIENT_CTRL_TX_Q_CNT(client_shm->ctrl);
-+
-+	/* Check if client is requesting for more queues than supported */
-+	if (cnt > HIF_CLIENT_QUEUES_MAX)
-+		cnt = HIF_CLIENT_QUEUES_MAX;
-+
-+	client->tx_qn = cnt;
-+	tx_qbase = (struct tx_queue_desc *)client_shm->tx_qbase;
-+	for (i = 0; i < cnt; i++) {
-+		tx_queue = &client->tx_q[i];
-+		tx_queue->base = tx_qbase + i * client_shm->tx_qsize;
-+		tx_queue->size = client_shm->tx_qsize;
-+		tx_queue->ack_idx = 0;
-+	}
-+
-+	set_bit(client_id, &hif->shm->g_client_status[0]);
-+
-+unlock:
-+	spin_unlock_bh(&hif->tx_lock);
-+
-+	return err;
-+}
-+
-+/*
-+ * pfe_hif_client_unregister
-+ *
-+ * This function used to unregister a client  from the HIF driver.
-+ *
-+ */
-+static void pfe_hif_client_unregister(struct pfe_hif *hif, u32 client_id)
-+{
-+	pr_info("%s\n", __func__);
-+
-+	/*
-+	 * Mark client as no longer available (which prevents further packet
-+	 * receive for this client)
-+	 */
-+	spin_lock_bh(&hif->tx_lock);
-+
-+	if (!test_bit(client_id, &hif->shm->g_client_status[0])) {
-+		pr_err("%s: client %d not registered\n", __func__,
-+		       client_id);
-+
-+		spin_unlock_bh(&hif->tx_lock);
-+		return;
-+	}
-+
-+	clear_bit(client_id, &hif->shm->g_client_status[0]);
-+
-+	spin_unlock_bh(&hif->tx_lock);
-+}
-+
-+/*
-+ * client_put_rxpacket-
-+ * This functions puts the Rx pkt  in the given client Rx queue.
-+ * It actually swap the Rx pkt in the client Rx descriptor buffer
-+ * and returns the free buffer from it.
-+ *
-+ * If the function returns NULL means client Rx queue is full and
-+ * packet couldn't send to client queue.
-+ */
-+static void *client_put_rxpacket(struct hif_rx_queue *queue, void *pkt, u32 len,
-+				 u32 flags, u32 client_ctrl, u32 *rem_len)
-+{
-+	void *free_pkt = NULL;
-+	struct rx_queue_desc *desc = queue->base + queue->write_idx;
-+
-+	if (readl(&desc->ctrl) & CL_DESC_OWN) {
-+		if (page_mode) {
-+			int rem_page_size = PAGE_SIZE -
-+					PRESENT_OFST_IN_PAGE(pkt);
-+			int cur_pkt_size = ROUND_MIN_RX_SIZE(len +
-+					pfe_pkt_headroom);
-+			*rem_len = (rem_page_size - cur_pkt_size);
-+			if (*rem_len) {
-+				free_pkt = pkt + cur_pkt_size;
-+				get_page(virt_to_page(free_pkt));
-+			} else {
-+				free_pkt = (void
-+				*)__get_free_page(GFP_ATOMIC | GFP_DMA_PFE);
-+				*rem_len = pfe_pkt_size;
-+			}
-+		} else {
-+			free_pkt = kmalloc(PFE_BUF_SIZE, GFP_ATOMIC |
-+					GFP_DMA_PFE);
-+			*rem_len = PFE_BUF_SIZE - pfe_pkt_headroom;
-+		}
-+
-+		if (free_pkt) {
-+			desc->data = pkt;
-+			desc->client_ctrl = client_ctrl;
-+			/*
-+			 * Ensure everything else is written to DDR before
-+			 * writing bd->ctrl
-+			 */
-+			smp_wmb();
-+			writel(CL_DESC_BUF_LEN(len) | flags, &desc->ctrl);
-+			/* queue->write_idx = (queue->write_idx + 1)
-+			 *		       & (queue->size - 1);
-+			 */
-+			free_pkt += pfe_pkt_headroom;
-+		}
-+	}
-+
-+	return free_pkt;
-+}
-+
-+/*
-+ * pfe_hif_rx_process-
-+ * This function does pfe hif rx queue processing.
-+ * Dequeue packet from Rx queue and send it to corresponding client queue
-+ */
-+static int pfe_hif_rx_process(struct pfe_hif *hif, int budget)
-+{
-+	struct hif_desc	*desc;
-+	struct hif_hdr *pkt_hdr;
-+	struct __hif_hdr hif_hdr;
-+	void *free_buf;
-+	int rtc, len, rx_processed = 0;
-+	struct __hif_desc local_desc;
-+	int flags;
-+	unsigned int desc_p;
-+	unsigned int buf_size = 0;
-+
-+	spin_lock_bh(&hif->lock);
-+
-+	rtc = hif->rxtoclean_index;
-+
-+	while (rx_processed < budget) {
-+		desc = hif->rx_base + rtc;
-+
-+		__memcpy12(&local_desc, desc);
-+
-+		/* ACK pending Rx interrupt */
-+		if (local_desc.ctrl & BD_CTRL_DESC_EN) {
-+			writel(HIF_INT | HIF_RXPKT_INT, HIF_INT_SRC);
-+
-+			if (rx_processed == 0) {
-+				if (napi_first_batch == 1) {
-+					desc_p = hif->descr_baseaddr_p +
-+					((unsigned long int)(desc) -
-+					(unsigned long
-+					int)hif->descr_baseaddr_v);
-+					napi_first_batch = 0;
-+				}
-+			}
-+
-+			__memcpy12(&local_desc, desc);
-+
-+			if (local_desc.ctrl & BD_CTRL_DESC_EN)
-+				break;
-+		}
-+
-+		napi_first_batch = 0;
-+
-+#ifdef HIF_NAPI_STATS
-+		hif->napi_counters[NAPI_DESC_COUNT]++;
-+#endif
-+		len = BD_BUF_LEN(local_desc.ctrl);
-+		/*
-+		 * dma_unmap_single(hif->dev, DDR_PFE_TO_PHYS(local_desc.data),
-+		 * hif->rx_buf_len[rtc], DMA_FROM_DEVICE);
-+		 */
-+		dma_unmap_single(hif->dev, DDR_PFE_TO_PHYS(local_desc.data),
-+				 hif->rx_buf_len[rtc], DMA_FROM_DEVICE);
-+
-+		pkt_hdr = (struct hif_hdr *)hif->rx_buf_addr[rtc];
-+
-+		/* Track last HIF header received */
-+		if (!hif->started) {
-+			hif->started = 1;
-+
-+			__memcpy8(&hif_hdr, pkt_hdr);
-+
-+			hif->qno = hif_hdr.hdr.q_num;
-+			hif->client_id = hif_hdr.hdr.client_id;
-+			hif->client_ctrl = (hif_hdr.hdr.client_ctrl1 << 16) |
-+						hif_hdr.hdr.client_ctrl;
-+			flags = CL_DESC_FIRST;
-+
-+		} else {
-+			flags = 0;
-+		}
-+
-+		if (local_desc.ctrl & BD_CTRL_LIFM)
-+			flags |= CL_DESC_LAST;
-+
-+		/* Check for valid client id and still registered */
-+		if ((hif->client_id >= HIF_CLIENTS_MAX) ||
-+		    !(test_bit(hif->client_id,
-+			&hif->shm->g_client_status[0]))) {
-+			printk_ratelimited("%s: packet with invalid client id %d q_num %d\n",
-+					   __func__,
-+					   hif->client_id,
-+					   hif->qno);
-+
-+			free_buf = pkt_hdr;
-+
-+			goto pkt_drop;
-+		}
-+
-+		/* Check to valid queue number */
-+		if (hif->client[hif->client_id].rx_qn <= hif->qno) {
-+			pr_info("%s: packet with invalid queue: %d\n"
-+				, __func__, hif->qno);
-+			hif->qno = 0;
-+		}
-+
-+		free_buf =
-+		client_put_rxpacket(&hif->client[hif->client_id].rx_q[hif->qno],
-+				    (void *)pkt_hdr, len, flags,
-+			hif->client_ctrl, &buf_size);
-+
-+		hif_lib_indicate_client(hif->client_id, EVENT_RX_PKT_IND,
-+					hif->qno);
-+
-+		if (unlikely(!free_buf)) {
-+#ifdef HIF_NAPI_STATS
-+			hif->napi_counters[NAPI_CLIENT_FULL_COUNT]++;
-+#endif
-+			/*
-+			 * If we want to keep in polling mode to retry later,
-+			 * we need to tell napi that we consumed
-+			 * the full budget or we will hit a livelock scenario.
-+			 * The core code keeps this napi instance
-+			 * at the head of the list and none of the other
-+			 * instances get to run
-+			 */
-+			rx_processed = budget;
-+
-+			if (flags & CL_DESC_FIRST)
-+				hif->started = 0;
-+
-+			break;
-+		}
-+
-+pkt_drop:
-+		/*Fill free buffer in the descriptor */
-+		hif->rx_buf_addr[rtc] = free_buf;
-+		hif->rx_buf_len[rtc] = min(pfe_pkt_size, buf_size);
-+		writel((DDR_PHYS_TO_PFE
-+			((u32)dma_map_single(hif->dev,
-+			free_buf, hif->rx_buf_len[rtc], DMA_FROM_DEVICE))),
-+			&desc->data);
-+		/*
-+		 * Ensure everything else is written to DDR before
-+		 * writing bd->ctrl
-+		 */
-+		wmb();
-+		writel((BD_CTRL_PKT_INT_EN | BD_CTRL_LIFM | BD_CTRL_DIR |
-+			BD_CTRL_DESC_EN | BD_BUF_LEN(hif->rx_buf_len[rtc])),
-+			&desc->ctrl);
-+
-+		rtc = (rtc + 1) & (hif->rx_ring_size - 1);
-+
-+		if (local_desc.ctrl & BD_CTRL_LIFM) {
-+			if (!(hif->client_ctrl & HIF_CTRL_RX_CONTINUED)) {
-+				rx_processed++;
-+
-+#ifdef HIF_NAPI_STATS
-+				hif->napi_counters[NAPI_PACKET_COUNT]++;
-+#endif
-+			}
-+			hif->started = 0;
-+		}
-+	}
-+
-+	hif->rxtoclean_index = rtc;
-+	spin_unlock_bh(&hif->lock);
-+
-+	/* we made some progress, re-start rx dma in case it stopped */
-+	hif_rx_dma_start();
-+
-+	return rx_processed;
-+}
-+
-+/*
-+ * client_ack_txpacket-
-+ * This function ack the Tx packet in the give client Tx queue by resetting
-+ * ownership bit in the descriptor.
-+ */
-+static int client_ack_txpacket(struct pfe_hif *hif, unsigned int client_id,
-+			       unsigned int q_no)
-+{
-+	struct hif_tx_queue *queue = &hif->client[client_id].tx_q[q_no];
-+	struct tx_queue_desc *desc = queue->base + queue->ack_idx;
-+
-+	if (readl(&desc->ctrl) & CL_DESC_OWN) {
-+		writel((readl(&desc->ctrl) & ~CL_DESC_OWN), &desc->ctrl);
-+		/* queue->ack_idx = (queue->ack_idx + 1) & (queue->size - 1); */
-+
-+		return 0;
-+
-+	} else {
-+		/*This should not happen */
-+		pr_err("%s: %d %d %d %d %d %p %d\n", __func__,
-+		       hif->txtosend, hif->txtoclean, hif->txavail,
-+			client_id, q_no, queue, queue->ack_idx);
-+		WARN(1, "%s: doesn't own this descriptor", __func__);
-+		return 1;
-+	}
-+}
-+
-+void __hif_tx_done_process(struct pfe_hif *hif, int count)
-+{
-+	struct hif_desc *desc;
-+	struct hif_desc_sw *desc_sw;
-+	int ttc, tx_avl;
-+	int pkts_done[HIF_CLIENTS_MAX] = {0, 0};
-+
-+	ttc = hif->txtoclean;
-+	tx_avl = hif->txavail;
-+
-+	while ((tx_avl < hif->tx_ring_size) && count--) {
-+		desc = hif->tx_base + ttc;
-+
-+		if (readl(&desc->ctrl) & BD_CTRL_DESC_EN)
-+			break;
-+
-+		desc_sw = &hif->tx_sw_queue[ttc];
-+
-+		if (desc_sw->data) {
-+			/*
-+			 * dmap_unmap_single(hif->dev, desc_sw->data,
-+			 * desc_sw->len, DMA_TO_DEVICE);
-+			 */
-+			dma_unmap_single(hif->dev, desc_sw->data,
-+					 desc_sw->len, DMA_TO_DEVICE);
-+		}
-+
-+		if (desc_sw->client_id > HIF_CLIENTS_MAX)
-+			pr_err("Invalid cl id %d\n", desc_sw->client_id);
-+
-+		pkts_done[desc_sw->client_id]++;
-+
-+		client_ack_txpacket(hif, desc_sw->client_id, desc_sw->q_no);
-+
-+		ttc = (ttc + 1) & (hif->tx_ring_size - 1);
-+		tx_avl++;
-+	}
-+
-+	if (pkts_done[0])
-+		hif_lib_indicate_client(0, EVENT_TXDONE_IND, 0);
-+	if (pkts_done[1])
-+		hif_lib_indicate_client(1, EVENT_TXDONE_IND, 0);
-+
-+	hif->txtoclean = ttc;
-+	hif->txavail = tx_avl;
-+
-+	if (!count) {
-+		tasklet_schedule(&hif->tx_cleanup_tasklet);
-+	} else {
-+		/*Enable Tx done interrupt */
-+		writel(readl_relaxed(HIF_INT_ENABLE) | HIF_TXPKT_INT,
-+		       HIF_INT_ENABLE);
-+	}
-+}
-+
-+static void pfe_tx_do_cleanup(unsigned long data)
-+{
-+	struct pfe_hif *hif = (struct pfe_hif *)data;
-+
-+	writel(HIF_INT | HIF_TXPKT_INT, HIF_INT_SRC);
-+
-+	hif_tx_done_process(hif, 64);
-+}
-+
-+/*
-+ * __hif_xmit_pkt -
-+ * This function puts one packet in the HIF Tx queue
-+ */
-+void __hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int
-+			q_no, void *data, u32 len, unsigned int flags)
-+{
-+	struct hif_desc	*desc;
-+	struct hif_desc_sw *desc_sw;
-+
-+	desc = hif->tx_base + hif->txtosend;
-+	desc_sw = &hif->tx_sw_queue[hif->txtosend];
-+
-+	desc_sw->len = len;
-+	desc_sw->client_id = client_id;
-+	desc_sw->q_no = q_no;
-+	desc_sw->flags = flags;
-+
-+	if (flags & HIF_DONT_DMA_MAP) {
-+		desc_sw->data = 0;
-+		writel((u32)DDR_PHYS_TO_PFE(data), &desc->data);
-+	} else {
-+		desc_sw->data = dma_map_single(hif->dev, data, len,
-+						DMA_TO_DEVICE);
-+		writel((u32)DDR_PHYS_TO_PFE(desc_sw->data), &desc->data);
-+	}
-+
-+	hif->txtosend = (hif->txtosend + 1) & (hif->tx_ring_size - 1);
-+	hif->txavail--;
-+
-+	if ((!((flags & HIF_DATA_VALID) && (flags &
-+				HIF_LAST_BUFFER))))
-+		goto skip_tx;
-+
-+	/*
-+	 * Ensure everything else is written to DDR before
-+	 * writing bd->ctrl
-+	 */
-+	wmb();
-+
-+	do {
-+		desc_sw = &hif->tx_sw_queue[hif->txtoflush];
-+		desc = hif->tx_base + hif->txtoflush;
-+
-+		if (desc_sw->flags & HIF_LAST_BUFFER) {
-+			writel((BD_CTRL_LIFM |
-+			       BD_CTRL_BRFETCH_DISABLE | BD_CTRL_RTFETCH_DISABLE
-+			       | BD_CTRL_PARSE_DISABLE | BD_CTRL_DESC_EN |
-+				BD_CTRL_PKT_INT_EN | BD_BUF_LEN(desc_sw->len)),
-+				&desc->ctrl);
-+		} else {
-+			writel((BD_CTRL_DESC_EN |
-+				BD_BUF_LEN(desc_sw->len)), &desc->ctrl);
-+		}
-+		hif->txtoflush = (hif->txtoflush + 1) & (hif->tx_ring_size - 1);
-+	}
-+	while (hif->txtoflush != hif->txtosend)
-+		;
-+
-+skip_tx:
-+	return;
-+}
-+
-+int hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int q_no,
-+		 void *data, unsigned int len)
-+{
-+	int rc = 0;
-+
-+	spin_lock_bh(&hif->tx_lock);
-+
-+	if (!hif->txavail) {
-+		rc = 1;
-+	} else {
-+		__hif_xmit_pkt(hif, client_id, q_no, data, len,
-+			       HIF_FIRST_BUFFER | HIF_LAST_BUFFER);
-+		hif_tx_dma_start();
-+	}
-+
-+	if (hif->txavail < (hif->tx_ring_size >> 1))
-+		__hif_tx_done_process(hif, TX_FREE_MAX_COUNT);
-+
-+	spin_unlock_bh(&hif->tx_lock);
-+
-+	return rc;
-+}
-+
-+static irqreturn_t wol_isr(int irq, void *dev_id)
-+{
-+	pr_info("WoL\n");
-+	gemac_set_wol(EMAC1_BASE_ADDR, 0);
-+	gemac_set_wol(EMAC2_BASE_ADDR, 0);
-+	return IRQ_HANDLED;
-+}
-+
-+/*
-+ * hif_isr-
-+ * This ISR routine processes Rx/Tx done interrupts from the HIF hardware block
-+ */
-+static irqreturn_t hif_isr(int irq, void *dev_id)
-+{
-+	struct pfe_hif *hif = (struct pfe_hif *)dev_id;
-+	int int_status;
-+	int int_enable_mask;
-+
-+	/*Read hif interrupt source register */
-+	int_status = readl_relaxed(HIF_INT_SRC);
-+	int_enable_mask = readl_relaxed(HIF_INT_ENABLE);
-+
-+	if ((int_status & HIF_INT) == 0)
-+		return IRQ_NONE;
-+
-+	int_status &= ~(HIF_INT);
-+
-+	if (int_status & HIF_RXPKT_INT) {
-+		int_status &= ~(HIF_RXPKT_INT);
-+		int_enable_mask &= ~(HIF_RXPKT_INT);
-+
-+		napi_first_batch = 1;
-+
-+		if (napi_schedule_prep(&hif->napi)) {
-+#ifdef HIF_NAPI_STATS
-+			hif->napi_counters[NAPI_SCHED_COUNT]++;
-+#endif
-+			__napi_schedule(&hif->napi);
-+		}
-+	}
-+	if (int_status & HIF_TXPKT_INT) {
-+		int_status &= ~(HIF_TXPKT_INT);
-+		int_enable_mask &= ~(HIF_TXPKT_INT);
-+		/*Schedule tx cleanup tassklet */
-+		tasklet_schedule(&hif->tx_cleanup_tasklet);
-+	}
-+
-+	/*Disable interrupts, they will be enabled after they are serviced */
-+	writel_relaxed(int_enable_mask, HIF_INT_ENABLE);
-+
-+	if (int_status) {
-+		pr_info("%s : Invalid interrupt : %d\n", __func__,
-+			int_status);
-+		writel(int_status, HIF_INT_SRC);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+void hif_process_client_req(struct pfe_hif *hif, int req, int data1, int data2)
-+{
-+	unsigned int client_id = data1;
-+
-+	if (client_id >= HIF_CLIENTS_MAX) {
-+		pr_err("%s: client id %d out of bounds\n", __func__,
-+		       client_id);
-+		return;
-+	}
-+
-+	switch (req) {
-+	case REQUEST_CL_REGISTER:
-+			/* Request for register a client */
-+			pr_info("%s: register client_id %d\n",
-+				__func__, client_id);
-+			pfe_hif_client_register(hif, client_id, (struct
-+				hif_client_shm *)&hif->shm->client[client_id]);
-+			break;
-+
-+	case REQUEST_CL_UNREGISTER:
-+			pr_info("%s: unregister client_id %d\n",
-+				__func__, client_id);
-+
-+			/* Request for unregister a client */
-+			pfe_hif_client_unregister(hif, client_id);
-+
-+			break;
-+
-+	default:
-+			pr_err("%s: unsupported request %d\n",
-+			       __func__, req);
-+			break;
-+	}
-+
-+	/*
-+	 * Process client Tx queues
-+	 * Currently we don't have checking for tx pending
-+	 */
-+}
-+
-+/*
-+ * pfe_hif_rx_poll
-+ *  This function is NAPI poll function to process HIF Rx queue.
-+ */
-+static int pfe_hif_rx_poll(struct napi_struct *napi, int budget)
-+{
-+	struct pfe_hif *hif = container_of(napi, struct pfe_hif, napi);
-+	int work_done;
-+
-+#ifdef HIF_NAPI_STATS
-+	hif->napi_counters[NAPI_POLL_COUNT]++;
-+#endif
-+
-+	work_done = pfe_hif_rx_process(hif, budget);
-+
-+	if (work_done < budget) {
-+		napi_complete(napi);
-+		writel(readl_relaxed(HIF_INT_ENABLE) | HIF_RXPKT_INT,
-+		       HIF_INT_ENABLE);
-+	}
-+#ifdef HIF_NAPI_STATS
-+	else
-+		hif->napi_counters[NAPI_FULL_BUDGET_COUNT]++;
-+#endif
-+
-+	return work_done;
-+}
-+
-+/*
-+ * pfe_hif_init
-+ * This function initializes the baseaddresses and irq, etc.
-+ */
-+int pfe_hif_init(struct pfe *pfe)
-+{
-+	struct pfe_hif *hif = &pfe->hif;
-+	int err;
-+
-+	pr_info("%s\n", __func__);
-+
-+	hif->dev = pfe->dev;
-+	hif->irq = pfe->hif_irq;
-+
-+	err = pfe_hif_alloc_descr(hif);
-+	if (err)
-+		goto err0;
-+
-+	if (pfe_hif_init_buffers(hif)) {
-+		pr_err("%s: Could not initialize buffer descriptors\n"
-+			, __func__);
-+		err = -ENOMEM;
-+		goto err1;
-+	}
-+
-+	/* Initialize NAPI for Rx processing */
-+	init_dummy_netdev(&hif->dummy_dev);
-+	netif_napi_add(&hif->dummy_dev, &hif->napi, pfe_hif_rx_poll,
-+		       HIF_RX_POLL_WEIGHT);
-+	napi_enable(&hif->napi);
-+
-+	spin_lock_init(&hif->tx_lock);
-+	spin_lock_init(&hif->lock);
-+
-+	hif_init();
-+	hif_rx_enable();
-+	hif_tx_enable();
-+
-+	/* Disable tx done interrupt */
-+	writel(HIF_INT_MASK, HIF_INT_ENABLE);
-+
-+	gpi_enable(HGPI_BASE_ADDR);
-+
-+	err = request_irq(hif->irq, hif_isr, 0, "pfe_hif", hif);
-+	if (err) {
-+		pr_err("%s: failed to get the hif IRQ = %d\n",
-+		       __func__, hif->irq);
-+		goto err1;
-+	}
-+
-+	err = request_irq(pfe->wol_irq, wol_isr, 0, "pfe_wol", pfe);
-+	if (err) {
-+		pr_err("%s: failed to get the wol IRQ = %d\n",
-+		       __func__, pfe->wol_irq);
-+		goto err1;
-+	}
-+
-+	tasklet_init(&hif->tx_cleanup_tasklet,
-+		     (void(*)(unsigned long))pfe_tx_do_cleanup,
-+		     (unsigned long)hif);
-+
-+	return 0;
-+err1:
-+	pfe_hif_free_descr(hif);
-+err0:
-+	return err;
-+}
-+
-+/* pfe_hif_exit- */
-+void pfe_hif_exit(struct pfe *pfe)
-+{
-+	struct pfe_hif *hif = &pfe->hif;
-+
-+	pr_info("%s\n", __func__);
-+
-+	tasklet_kill(&hif->tx_cleanup_tasklet);
-+
-+	spin_lock_bh(&hif->lock);
-+	hif->shm->g_client_status[0] = 0;
-+	/* Make sure all clients are disabled*/
-+	hif->shm->g_client_status[1] = 0;
-+
-+	spin_unlock_bh(&hif->lock);
-+
-+	/*Disable Rx/Tx */
-+	gpi_disable(HGPI_BASE_ADDR);
-+	hif_rx_disable();
-+	hif_tx_disable();
-+
-+	napi_disable(&hif->napi);
-+	netif_napi_del(&hif->napi);
-+
-+	free_irq(pfe->wol_irq, pfe);
-+	free_irq(hif->irq, hif);
-+
-+	pfe_hif_release_buffers(hif);
-+	pfe_hif_free_descr(hif);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.c
-@@ -0,0 +1,638 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/workqueue.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/sched.h>
-+#include <linux/skbuff.h>
-+#include <linux/moduleparam.h>
-+#include <linux/cpu.h>
-+
-+#include "pfe_mod.h"
-+#include "pfe_hif.h"
-+#include "pfe_hif_lib.h"
-+
-+unsigned int lro_mode;
-+unsigned int page_mode;
-+unsigned int tx_qos;
-+unsigned int pfe_pkt_size;
-+unsigned int pfe_pkt_headroom;
-+unsigned int emac_txq_cnt;
-+
-+/*
-+ * @pfe_hal_lib.c.
-+ * Common functions used by HIF client drivers
-+ */
-+
-+/*HIF shared memory Global variable */
-+struct hif_shm ghif_shm;
-+
-+/* Cleanup the HIF shared memory, release HIF rx_buffer_pool.
-+ * This function should be called after pfe_hif_exit
-+ *
-+ * @param[in] hif_shm		Shared memory address location in DDR
-+ */
-+static void pfe_hif_shm_clean(struct hif_shm *hif_shm)
-+{
-+	int i;
-+	void *pkt;
-+
-+	for (i = 0; i < hif_shm->rx_buf_pool_cnt; i++) {
-+		pkt = hif_shm->rx_buf_pool[i];
-+		if (pkt) {
-+			hif_shm->rx_buf_pool[i] = NULL;
-+			pkt -= pfe_pkt_headroom;
-+
-+			if (page_mode)
-+				put_page(virt_to_page(pkt));
-+			else
-+				kfree(pkt);
-+		}
-+	}
-+}
-+
-+/* Initialize shared memory used between HIF driver and clients,
-+ * allocate rx_buffer_pool required for HIF Rx descriptors.
-+ * This function should be called before initializing HIF driver.
-+ *
-+ * @param[in] hif_shm		Shared memory address location in DDR
-+ * @rerurn			0 - on succes, <0 on fail to initialize
-+ */
-+static int pfe_hif_shm_init(struct hif_shm *hif_shm)
-+{
-+	int i;
-+	void *pkt;
-+
-+	memset(hif_shm, 0, sizeof(struct hif_shm));
-+	hif_shm->rx_buf_pool_cnt = HIF_RX_DESC_NT;
-+
-+	for (i = 0; i < hif_shm->rx_buf_pool_cnt; i++) {
-+		if (page_mode) {
-+			pkt = (void *)__get_free_page(GFP_KERNEL |
-+				GFP_DMA_PFE);
-+		} else {
-+			pkt = kmalloc(PFE_BUF_SIZE, GFP_KERNEL | GFP_DMA_PFE);
-+		}
-+
-+		if (pkt)
-+			hif_shm->rx_buf_pool[i] = pkt + pfe_pkt_headroom;
-+		else
-+			goto err0;
-+	}
-+
-+	return 0;
-+
-+err0:
-+	pr_err("%s Low memory\n", __func__);
-+	pfe_hif_shm_clean(hif_shm);
-+	return -ENOMEM;
-+}
-+
-+/*This function sends indication to HIF driver
-+ *
-+ * @param[in] hif	hif context
-+ */
-+static void hif_lib_indicate_hif(struct pfe_hif *hif, int req, int data1, int
-+					data2)
-+{
-+	hif_process_client_req(hif, req, data1, data2);
-+}
-+
-+void hif_lib_indicate_client(int client_id, int event_type, int qno)
-+{
-+	struct hif_client_s *client = pfe->hif_client[client_id];
-+
-+	if (!client || (event_type >= HIF_EVENT_MAX) || (qno >=
-+		HIF_CLIENT_QUEUES_MAX))
-+		return;
-+
-+	if (!test_and_set_bit(qno, &client->queue_mask[event_type]))
-+		client->event_handler(client->priv, event_type, qno);
-+}
-+
-+/*This function releases Rx queue descriptors memory and pre-filled buffers
-+ *
-+ * @param[in] client	hif_client context
-+ */
-+static void hif_lib_client_release_rx_buffers(struct hif_client_s *client)
-+{
-+	struct rx_queue_desc *desc;
-+	int qno, ii;
-+	void *buf;
-+
-+	for (qno = 0; qno < client->rx_qn; qno++) {
-+		desc = client->rx_q[qno].base;
-+
-+		for (ii = 0; ii < client->rx_q[qno].size; ii++) {
-+			buf = (void *)desc->data;
-+			if (buf) {
-+				buf -= pfe_pkt_headroom;
-+
-+				if (page_mode)
-+					free_page((unsigned long)buf);
-+				else
-+					kfree(buf);
-+
-+				desc->ctrl = 0;
-+			}
-+
-+			desc++;
-+		}
-+	}
-+
-+	kfree(client->rx_qbase);
-+}
-+
-+/*This function allocates memory for the rxq descriptors and pre-fill rx queues
-+ * with buffers.
-+ * @param[in] client	client context
-+ * @param[in] q_size	size of the rxQ, all queues are of same size
-+ */
-+static int hif_lib_client_init_rx_buffers(struct hif_client_s *client, int
-+						q_size)
-+{
-+	struct rx_queue_desc *desc;
-+	struct hif_client_rx_queue *queue;
-+	int ii, qno;
-+
-+	/*Allocate memory for the client queues */
-+	client->rx_qbase = kzalloc(client->rx_qn * q_size * sizeof(struct
-+				rx_queue_desc), GFP_KERNEL);
-+	if (!client->rx_qbase)
-+		goto err;
-+
-+	for (qno = 0; qno < client->rx_qn; qno++) {
-+		queue = &client->rx_q[qno];
-+
-+		queue->base = client->rx_qbase + qno * q_size * sizeof(struct
-+				rx_queue_desc);
-+		queue->size = q_size;
-+		queue->read_idx = 0;
-+		queue->write_idx = 0;
-+
-+		pr_debug("rx queue: %d, base: %p, size: %d\n", qno,
-+			 queue->base, queue->size);
-+	}
-+
-+	for (qno = 0; qno < client->rx_qn; qno++) {
-+		queue = &client->rx_q[qno];
-+		desc = queue->base;
-+
-+		for (ii = 0; ii < queue->size; ii++) {
-+			desc->ctrl = CL_DESC_BUF_LEN(pfe_pkt_size) |
-+					CL_DESC_OWN;
-+			desc++;
-+		}
-+	}
-+
-+	return 0;
-+
-+err:
-+	return 1;
-+}
-+
-+#define inc_cl_idx(idxname)					\
-+	({ typeof(idxname) idxname_ = (idxname);		\
-+	((idxname_) = (idxname_ + 1) & (queue->size - 1)); })
-+
-+static void hif_lib_client_cleanup_tx_queue(struct hif_client_tx_queue *queue)
-+{
-+	pr_debug("%s\n", __func__);
-+
-+	/*
-+	 * Check if there are any pending packets. Client must flush the tx
-+	 * queues before unregistering, by calling by calling
-+	 * hif_lib_tx_get_next_complete()
-+	 *
-+	 * Hif no longer calls since we are no longer registered
-+	 */
-+	if (queue->tx_pending)
-+		pr_err("%s: pending transmit packets\n", __func__);
-+}
-+
-+static void hif_lib_client_release_tx_buffers(struct hif_client_s *client)
-+{
-+	int qno;
-+
-+	pr_debug("%s\n", __func__);
-+
-+	for (qno = 0; qno < client->tx_qn; qno++)
-+		hif_lib_client_cleanup_tx_queue(&client->tx_q[qno]);
-+
-+	kfree(client->tx_qbase);
-+}
-+
-+static int hif_lib_client_init_tx_buffers(struct hif_client_s *client, int
-+						q_size)
-+{
-+	struct hif_client_tx_queue *queue;
-+	int qno;
-+
-+	client->tx_qbase = kzalloc(client->tx_qn * q_size * sizeof(struct
-+					tx_queue_desc), GFP_KERNEL);
-+	if (!client->tx_qbase)
-+		return 1;
-+
-+	for (qno = 0; qno < client->tx_qn; qno++) {
-+		queue = &client->tx_q[qno];
-+
-+		queue->base = client->tx_qbase + qno * q_size * sizeof(struct
-+				tx_queue_desc);
-+		queue->size = q_size;
-+		queue->read_idx = 0;
-+		queue->write_idx = 0;
-+		queue->tx_pending = 0;
-+		queue->nocpy_flag = 0;
-+		queue->prev_tmu_tx_pkts = 0;
-+		queue->done_tmu_tx_pkts = 0;
-+
-+		pr_debug("tx queue: %d, base: %p, size: %d\n", qno,
-+			 queue->base, queue->size);
-+	}
-+
-+	return 0;
-+}
-+
-+static int hif_lib_event_dummy(void *priv, int event_type, int qno)
-+{
-+	return 0;
-+}
-+
-+int hif_lib_client_register(struct hif_client_s *client)
-+{
-+	struct hif_shm *hif_shm;
-+	struct hif_client_shm *client_shm;
-+	int err, i;
-+	/* int loop_cnt = 0; */
-+
-+	pr_debug("%s\n", __func__);
-+
-+	/*Allocate memory before spin_lock*/
-+	if (hif_lib_client_init_rx_buffers(client, client->rx_qsize)) {
-+		err = -ENOMEM;
-+		goto err_rx;
-+	}
-+
-+	if (hif_lib_client_init_tx_buffers(client, client->tx_qsize)) {
-+		err = -ENOMEM;
-+		goto err_tx;
-+	}
-+
-+	spin_lock_bh(&pfe->hif.lock);
-+	if (!(client->pfe) || (client->id >= HIF_CLIENTS_MAX) ||
-+	    (pfe->hif_client[client->id])) {
-+		err = -EINVAL;
-+		goto err;
-+	}
-+
-+	hif_shm = client->pfe->hif.shm;
-+
-+	if (!client->event_handler)
-+		client->event_handler = hif_lib_event_dummy;
-+
-+	/*Initialize client specific shared memory */
-+	client_shm = (struct hif_client_shm *)&hif_shm->client[client->id];
-+	client_shm->rx_qbase = (unsigned long int)client->rx_qbase;
-+	client_shm->rx_qsize = client->rx_qsize;
-+	client_shm->tx_qbase = (unsigned long int)client->tx_qbase;
-+	client_shm->tx_qsize = client->tx_qsize;
-+	client_shm->ctrl = (client->tx_qn << CLIENT_CTRL_TX_Q_CNT_OFST) |
-+				(client->rx_qn << CLIENT_CTRL_RX_Q_CNT_OFST);
-+	/* spin_lock_init(&client->rx_lock); */
-+
-+	for (i = 0; i < HIF_EVENT_MAX; i++) {
-+		client->queue_mask[i] = 0;  /*
-+					     * By default all events are
-+					     * unmasked
-+					     */
-+	}
-+
-+	/*Indicate to HIF driver*/
-+	hif_lib_indicate_hif(&pfe->hif, REQUEST_CL_REGISTER, client->id, 0);
-+
-+	pr_debug("%s: client: %p, client_id: %d, tx_qsize: %d, rx_qsize: %d\n",
-+		 __func__, client, client->id, client->tx_qsize,
-+		 client->rx_qsize);
-+
-+	client->cpu_id = -1;
-+
-+	pfe->hif_client[client->id] = client;
-+	spin_unlock_bh(&pfe->hif.lock);
-+
-+	return 0;
-+
-+err:
-+	spin_unlock_bh(&pfe->hif.lock);
-+	hif_lib_client_release_tx_buffers(client);
-+
-+err_tx:
-+	hif_lib_client_release_rx_buffers(client);
-+
-+err_rx:
-+	return err;
-+}
-+
-+int hif_lib_client_unregister(struct hif_client_s *client)
-+{
-+	struct pfe *pfe = client->pfe;
-+	u32 client_id = client->id;
-+
-+	pr_info(
-+		"%s : client: %p, client_id: %d, txQ_depth: %d, rxQ_depth: %d\n"
-+		, __func__, client, client->id, client->tx_qsize,
-+		client->rx_qsize);
-+
-+	spin_lock_bh(&pfe->hif.lock);
-+	hif_lib_indicate_hif(&pfe->hif, REQUEST_CL_UNREGISTER, client->id, 0);
-+
-+	hif_lib_client_release_tx_buffers(client);
-+	hif_lib_client_release_rx_buffers(client);
-+	pfe->hif_client[client_id] = NULL;
-+	spin_unlock_bh(&pfe->hif.lock);
-+
-+	return 0;
-+}
-+
-+int hif_lib_event_handler_start(struct hif_client_s *client, int event,
-+				int qno)
-+{
-+	struct hif_client_rx_queue *queue = &client->rx_q[qno];
-+	struct rx_queue_desc *desc = queue->base + queue->read_idx;
-+
-+	if ((event >= HIF_EVENT_MAX) || (qno >= HIF_CLIENT_QUEUES_MAX)) {
-+		pr_debug("%s: Unsupported event : %d  queue number : %d\n",
-+			 __func__, event, qno);
-+		return -1;
-+	}
-+
-+	test_and_clear_bit(qno, &client->queue_mask[event]);
-+
-+	switch (event) {
-+	case EVENT_RX_PKT_IND:
-+		if (!(desc->ctrl & CL_DESC_OWN))
-+			hif_lib_indicate_client(client->id,
-+						EVENT_RX_PKT_IND, qno);
-+		break;
-+
-+	case EVENT_HIGH_RX_WM:
-+	case EVENT_TXDONE_IND:
-+	default:
-+		break;
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * This function gets one packet from the specified client queue
-+ * It also refill the rx buffer
-+ */
-+void *hif_lib_receive_pkt(struct hif_client_s *client, int qno, int *len, int
-+				*ofst, unsigned int *rx_ctrl,
-+				unsigned int *desc_ctrl, void **priv_data)
-+{
-+	struct hif_client_rx_queue *queue = &client->rx_q[qno];
-+	struct rx_queue_desc *desc;
-+	void *pkt = NULL;
-+
-+	/*
-+	 * Following lock is to protect rx queue access from,
-+	 * hif_lib_event_handler_start.
-+	 * In general below lock is not required, because hif_lib_xmit_pkt and
-+	 * hif_lib_event_handler_start are called from napi poll and which is
-+	 * not re-entrant. But if some client use in different way this lock is
-+	 * required.
-+	 */
-+	/*spin_lock_irqsave(&client->rx_lock, flags); */
-+	desc = queue->base + queue->read_idx;
-+	if (!(desc->ctrl & CL_DESC_OWN)) {
-+		pkt = desc->data - pfe_pkt_headroom;
-+
-+		*rx_ctrl = desc->client_ctrl;
-+		*desc_ctrl = desc->ctrl;
-+
-+		if (desc->ctrl & CL_DESC_FIRST) {
-+			u16 size = *rx_ctrl >> HIF_CTRL_RX_OFFSET_OFST;
-+
-+			if (size) {
-+				*len = CL_DESC_BUF_LEN(desc->ctrl) -
-+						PFE_PKT_HEADER_SZ - size;
-+				*ofst = pfe_pkt_headroom + PFE_PKT_HEADER_SZ
-+								+ size;
-+				*priv_data = desc->data + PFE_PKT_HEADER_SZ;
-+			} else {
-+				*len = CL_DESC_BUF_LEN(desc->ctrl) -
-+						PFE_PKT_HEADER_SZ;
-+				*ofst = pfe_pkt_headroom + PFE_PKT_HEADER_SZ;
-+				*priv_data = NULL;
-+			}
-+
-+		} else {
-+			*len = CL_DESC_BUF_LEN(desc->ctrl);
-+			*ofst = pfe_pkt_headroom;
-+		}
-+
-+		/*
-+		 * Needed so we don't free a buffer/page
-+		 * twice on module_exit
-+		 */
-+		desc->data = NULL;
-+
-+		/*
-+		 * Ensure everything else is written to DDR before
-+		 * writing bd->ctrl
-+		 */
-+		smp_wmb();
-+
-+		desc->ctrl = CL_DESC_BUF_LEN(pfe_pkt_size) | CL_DESC_OWN;
-+		inc_cl_idx(queue->read_idx);
-+	}
-+
-+	/*spin_unlock_irqrestore(&client->rx_lock, flags); */
-+	return pkt;
-+}
-+
-+static inline void hif_hdr_write(struct hif_hdr *pkt_hdr, unsigned int
-+					client_id, unsigned int qno,
-+					u32 client_ctrl)
-+{
-+	/* Optimize the write since the destinaton may be non-cacheable */
-+	if (!((unsigned long)pkt_hdr & 0x3)) {
-+		((u32 *)pkt_hdr)[0] = (client_ctrl << 16) | (qno << 8) |
-+					client_id;
-+	} else {
-+		((u16 *)pkt_hdr)[0] = (qno << 8) | (client_id & 0xFF);
-+		((u16 *)pkt_hdr)[1] = (client_ctrl & 0xFFFF);
-+	}
-+}
-+
-+/*This function puts the given packet in the specific client queue */
-+void __hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void
-+				*data, unsigned int len, u32 client_ctrl,
-+				unsigned int flags, void *client_data)
-+{
-+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
-+	struct tx_queue_desc *desc = queue->base + queue->write_idx;
-+
-+	/* First buffer */
-+	if (flags & HIF_FIRST_BUFFER) {
-+		data -= sizeof(struct hif_hdr);
-+		len += sizeof(struct hif_hdr);
-+
-+		hif_hdr_write(data, client->id, qno, client_ctrl);
-+	}
-+
-+	desc->data = client_data;
-+	desc->ctrl = CL_DESC_OWN | CL_DESC_FLAGS(flags);
-+
-+	__hif_xmit_pkt(&pfe->hif, client->id, qno, data, len, flags);
-+
-+	inc_cl_idx(queue->write_idx);
-+	queue->tx_pending++;
-+	queue->jiffies_last_packet = jiffies;
-+}
-+
-+/*This function puts the given packet in the specific client queue */
-+int hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void *data,
-+		     unsigned int len, u32 client_ctrl, void *client_data)
-+{
-+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
-+	struct tx_queue_desc *desc = queue->base + queue->write_idx;
-+
-+	if (queue->tx_pending < queue->size) {
-+		/*Construct pkt header */
-+
-+		data -= sizeof(struct hif_hdr);
-+		len += sizeof(struct hif_hdr);
-+
-+		hif_hdr_write(data, client->id, qno, client_ctrl);
-+
-+		desc->data = client_data;
-+		desc->ctrl = CL_DESC_OWN | CL_DESC_FLAGS(HIF_FIRST_BUFFER |
-+				HIF_LAST_BUFFER | HIF_DATA_VALID);
-+
-+		if (hif_xmit_pkt(&pfe->hif, client->id, qno, data, len))
-+			return 1;
-+
-+		inc_cl_idx(queue->write_idx);
-+		queue->tx_pending++;
-+		queue->jiffies_last_packet = jiffies;
-+
-+		return 0;
-+	}
-+
-+	pr_debug("%s Tx client %d qno %d is full\n", __func__, client->id,
-+		 qno);
-+	return 1;
-+}
-+
-+void *hif_lib_tx_get_next_complete(struct hif_client_s *client, int qno,
-+				   unsigned int *flags, int count)
-+{
-+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
-+	struct tx_queue_desc *desc = queue->base + queue->read_idx;
-+
-+	pr_debug("%s: qno : %d rd_indx: %d pending:%d\n", __func__, qno,
-+		 queue->read_idx, queue->tx_pending);
-+
-+	if (!queue->tx_pending)
-+		return NULL;
-+
-+	if (queue->nocpy_flag && !queue->done_tmu_tx_pkts) {
-+		u32 tmu_tx_pkts = be32_to_cpu(pe_dmem_read(TMU0_ID +
-+			client->id, TMU_DM_TX_TRANS, 4));
-+
-+		if (queue->prev_tmu_tx_pkts > tmu_tx_pkts)
-+			queue->done_tmu_tx_pkts = UINT_MAX -
-+				queue->prev_tmu_tx_pkts + tmu_tx_pkts;
-+		else
-+			queue->done_tmu_tx_pkts = tmu_tx_pkts -
-+						queue->prev_tmu_tx_pkts;
-+
-+		queue->prev_tmu_tx_pkts  = tmu_tx_pkts;
-+
-+		if (!queue->done_tmu_tx_pkts)
-+			return NULL;
-+	}
-+
-+	if (desc->ctrl & CL_DESC_OWN)
-+		return NULL;
-+
-+	inc_cl_idx(queue->read_idx);
-+	queue->tx_pending--;
-+
-+	*flags = CL_DESC_GET_FLAGS(desc->ctrl);
-+
-+	if (queue->done_tmu_tx_pkts && (*flags & HIF_LAST_BUFFER))
-+		queue->done_tmu_tx_pkts--;
-+
-+	return desc->data;
-+}
-+
-+static void hif_lib_tmu_credit_init(struct pfe *pfe)
-+{
-+	int i, q;
-+
-+	for (i = 0; i < NUM_GEMAC_SUPPORT; i++)
-+		for (q = 0; q < emac_txq_cnt; q++) {
-+			pfe->tmu_credit.tx_credit_max[i][q] = (q == 0) ?
-+					DEFAULT_Q0_QDEPTH : DEFAULT_MAX_QDEPTH;
-+			pfe->tmu_credit.tx_credit[i][q] =
-+					pfe->tmu_credit.tx_credit_max[i][q];
-+		}
-+}
-+
-+int pfe_hif_lib_init(struct pfe *pfe)
-+{
-+	int rc;
-+
-+	pr_info("%s\n", __func__);
-+
-+	if (lro_mode) {
-+		page_mode = 1;
-+		pfe_pkt_size = min(PAGE_SIZE, MAX_PFE_PKT_SIZE);
-+		pfe_pkt_headroom = 0;
-+	} else {
-+		page_mode = 0;
-+		pfe_pkt_size = PFE_PKT_SIZE;
-+		pfe_pkt_headroom = PFE_PKT_HEADROOM;
-+	}
-+
-+	if (tx_qos)
-+		emac_txq_cnt = EMAC_TXQ_CNT / 2;
-+	else
-+		emac_txq_cnt = EMAC_TXQ_CNT;
-+
-+	hif_lib_tmu_credit_init(pfe);
-+	pfe->hif.shm = &ghif_shm;
-+	rc = pfe_hif_shm_init(pfe->hif.shm);
-+
-+	return rc;
-+}
-+
-+void pfe_hif_lib_exit(struct pfe *pfe)
-+{
-+	pr_info("%s\n", __func__);
-+
-+	pfe_hif_shm_clean(pfe->hif.shm);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_hw.c
-@@ -0,0 +1,176 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include "pfe_mod.h"
-+#include "pfe_hw.h"
-+
-+/* Functions to handle most of pfe hw register initialization */
-+int pfe_hw_init(struct pfe *pfe, int resume)
-+{
-+	struct class_cfg class_cfg = {
-+		.pe_sys_clk_ratio = PE_SYS_CLK_RATIO,
-+		.route_table_baseaddr = pfe->ddr_phys_baseaddr +
-+					ROUTE_TABLE_BASEADDR,
-+		.route_table_hash_bits = ROUTE_TABLE_HASH_BITS,
-+	};
-+
-+	struct tmu_cfg tmu_cfg = {
-+		.pe_sys_clk_ratio = PE_SYS_CLK_RATIO,
-+		.llm_base_addr = pfe->ddr_phys_baseaddr + TMU_LLM_BASEADDR,
-+		.llm_queue_len = TMU_LLM_QUEUE_LEN,
-+	};
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	struct util_cfg util_cfg = {
-+		.pe_sys_clk_ratio = PE_SYS_CLK_RATIO,
-+	};
-+#endif
-+
-+	struct BMU_CFG bmu1_cfg = {
-+		.baseaddr = CBUS_VIRT_TO_PFE(LMEM_BASE_ADDR +
-+						BMU1_LMEM_BASEADDR),
-+		.count = BMU1_BUF_COUNT,
-+		.size = BMU1_BUF_SIZE,
-+		.low_watermark = 10,
-+		.high_watermark = 15,
-+	};
-+
-+	struct BMU_CFG bmu2_cfg = {
-+		.baseaddr = DDR_PHYS_TO_PFE(pfe->ddr_phys_baseaddr +
-+						BMU2_DDR_BASEADDR),
-+		.count = BMU2_BUF_COUNT,
-+		.size = BMU2_BUF_SIZE,
-+		.low_watermark = 250,
-+		.high_watermark = 253,
-+	};
-+
-+	struct gpi_cfg egpi1_cfg = {
-+		.lmem_rtry_cnt = EGPI1_LMEM_RTRY_CNT,
-+		.tmlf_txthres = EGPI1_TMLF_TXTHRES,
-+		.aseq_len = EGPI1_ASEQ_LEN,
-+		.mtip_pause_reg = CBUS_VIRT_TO_PFE(EMAC1_BASE_ADDR +
-+						EMAC_TCNTRL_REG),
-+	};
-+
-+	struct gpi_cfg egpi2_cfg = {
-+		.lmem_rtry_cnt = EGPI2_LMEM_RTRY_CNT,
-+		.tmlf_txthres = EGPI2_TMLF_TXTHRES,
-+		.aseq_len = EGPI2_ASEQ_LEN,
-+		.mtip_pause_reg = CBUS_VIRT_TO_PFE(EMAC2_BASE_ADDR +
-+						EMAC_TCNTRL_REG),
-+	};
-+
-+	struct gpi_cfg hgpi_cfg = {
-+		.lmem_rtry_cnt = HGPI_LMEM_RTRY_CNT,
-+		.tmlf_txthres = HGPI_TMLF_TXTHRES,
-+		.aseq_len = HGPI_ASEQ_LEN,
-+		.mtip_pause_reg = 0,
-+	};
-+
-+	pr_info("%s\n", __func__);
-+
-+#if !defined(LS1012A_PFE_RESET_WA)
-+	/* LS1012A needs this to make PE work correctly */
-+	writel(0x3,     CLASS_PE_SYS_CLK_RATIO);
-+	writel(0x3,     TMU_PE_SYS_CLK_RATIO);
-+	writel(0x3,     UTIL_PE_SYS_CLK_RATIO);
-+	usleep_range(10, 20);
-+#endif
-+
-+	pr_info("CLASS version: %x\n", readl(CLASS_VERSION));
-+	pr_info("TMU version: %x\n", readl(TMU_VERSION));
-+
-+	pr_info("BMU1 version: %x\n", readl(BMU1_BASE_ADDR +
-+		BMU_VERSION));
-+	pr_info("BMU2 version: %x\n", readl(BMU2_BASE_ADDR +
-+		BMU_VERSION));
-+
-+	pr_info("EGPI1 version: %x\n", readl(EGPI1_BASE_ADDR +
-+		GPI_VERSION));
-+	pr_info("EGPI2 version: %x\n", readl(EGPI2_BASE_ADDR +
-+		GPI_VERSION));
-+	pr_info("HGPI version: %x\n", readl(HGPI_BASE_ADDR +
-+		GPI_VERSION));
-+
-+	pr_info("HIF version: %x\n", readl(HIF_VERSION));
-+	pr_info("HIF NOPCY version: %x\n", readl(HIF_NOCPY_VERSION));
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	pr_info("UTIL version: %x\n", readl(UTIL_VERSION));
-+#endif
-+	while (!(readl(TMU_CTRL) & ECC_MEM_INIT_DONE))
-+		;
-+
-+	hif_rx_disable();
-+	hif_tx_disable();
-+
-+	bmu_init(BMU1_BASE_ADDR, &bmu1_cfg);
-+
-+	pr_info("bmu_init(1) done\n");
-+
-+	bmu_init(BMU2_BASE_ADDR, &bmu2_cfg);
-+
-+	pr_info("bmu_init(2) done\n");
-+
-+	class_cfg.resume = resume ? 1 : 0;
-+
-+	class_init(&class_cfg);
-+
-+	pr_info("class_init() done\n");
-+
-+	tmu_init(&tmu_cfg);
-+
-+	pr_info("tmu_init() done\n");
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	util_init(&util_cfg);
-+
-+	pr_info("util_init() done\n");
-+#endif
-+	gpi_init(EGPI1_BASE_ADDR, &egpi1_cfg);
-+
-+	pr_info("gpi_init(1) done\n");
-+
-+	gpi_init(EGPI2_BASE_ADDR, &egpi2_cfg);
-+
-+	pr_info("gpi_init(2) done\n");
-+
-+	gpi_init(HGPI_BASE_ADDR, &hgpi_cfg);
-+
-+	pr_info("gpi_init(hif) done\n");
-+
-+	bmu_enable(BMU1_BASE_ADDR);
-+
-+	pr_info("bmu_enable(1) done\n");
-+
-+	bmu_enable(BMU2_BASE_ADDR);
-+
-+	pr_info("bmu_enable(2) done\n");
-+
-+	return 0;
-+}
-+
-+void pfe_hw_exit(struct pfe *pfe)
-+{
-+	pr_info("%s\n", __func__);
-+
-+	bmu_disable(BMU1_BASE_ADDR);
-+	bmu_reset(BMU1_BASE_ADDR);
-+
-+	bmu_disable(BMU2_BASE_ADDR);
-+	bmu_reset(BMU2_BASE_ADDR);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-@@ -0,0 +1,388 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/of_net.h>
-+#include <linux/of_address.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/clk.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/regmap.h>
-+
-+#include "pfe_mod.h"
-+
-+struct ls1012a_pfe_platform_data pfe_platform_data;
-+
-+static int pfe_get_gemac_if_proprties(struct device_node *parent, int port, int
-+					if_cnt,
-+					struct ls1012a_pfe_platform_data
-+					*pdata)
-+{
-+	struct device_node *gem = NULL, *phy = NULL;
-+	int size;
-+	int ii = 0, phy_id = 0;
-+	const u32 *addr;
-+
-+	for (ii = 0; ii < if_cnt; ii++) {
-+		gem = of_get_next_child(parent, gem);
-+		if (!gem)
-+			goto err;
-+		addr = of_get_property(gem, "reg", &size);
-+		if (addr && (be32_to_cpup(addr) == port))
-+			break;
-+	}
-+
-+	if (ii >= if_cnt) {
-+		pr_err("%s:%d Failed to find interface = %d\n",
-+		       __func__, __LINE__, if_cnt);
-+		goto err;
-+	}
-+
-+	pdata->ls1012a_eth_pdata[port].gem_id = port;
-+
-+	of_get_mac_address(gem, pdata->ls1012a_eth_pdata[port].mac_addr);
-+
-+	pdata->ls1012a_eth_pdata[port].mii_config = of_get_phy_mode(gem);
-+
-+	if ((pdata->ls1012a_eth_pdata[port].mii_config) < 0)
-+		pr_err("%s:%d Incorrect Phy mode....\n", __func__,
-+		       __LINE__);
-+
-+	addr = of_get_property(gem, "fsl,gemac-bus-id", &size);
-+	if (!addr)
-+		pr_err("%s:%d Invalid gemac-bus-id....\n", __func__,
-+		       __LINE__);
-+	else
-+		pdata->ls1012a_eth_pdata[port].bus_id = be32_to_cpup(addr);
-+
-+	addr = of_get_property(gem, "fsl,gemac-phy-id", &size);
-+	if (!addr) {
-+		pr_err("%s:%d Invalid gemac-phy-id....\n", __func__,
-+		       __LINE__);
-+	} else {
-+		phy_id = be32_to_cpup(addr);
-+		pdata->ls1012a_eth_pdata[port].phy_id = phy_id;
-+		pdata->ls1012a_mdio_pdata[0].phy_mask &= ~(1 << phy_id);
-+	}
-+
-+	addr = of_get_property(gem, "fsl,mdio-mux-val", &size);
-+	if (!addr)
-+		pr_err("%s: Invalid mdio-mux-val....\n", __func__);
-+	else
-+		phy_id = be32_to_cpup(addr);
-+		pdata->ls1012a_eth_pdata[port].mdio_muxval = phy_id;
-+
-+	if (pdata->ls1012a_eth_pdata[port].phy_id < 32)
-+		pfe->mdio_muxval[pdata->ls1012a_eth_pdata[port].phy_id] =
-+			 pdata->ls1012a_eth_pdata[port].mdio_muxval;
-+
-+	addr = of_get_property(gem, "fsl,pfe-phy-if-flags", &size);
-+	if (!addr)
-+		pr_err("%s:%d Invalid pfe-phy-if-flags....\n",
-+		       __func__, __LINE__);
-+	else
-+		pdata->ls1012a_eth_pdata[port].phy_flags = be32_to_cpup(addr);
-+
-+	/* If PHY is enabled, read mdio properties */
-+	if (pdata->ls1012a_eth_pdata[port].phy_flags & GEMAC_NO_PHY)
-+		goto done;
-+
-+	phy = of_get_next_child(gem, NULL);
-+
-+	addr = of_get_property(phy, "reg", &size);
-+
-+	if (!addr)
-+		pr_err("%s:%d Invalid phy enable flag....\n",
-+		       __func__, __LINE__);
-+	else
-+		pdata->ls1012a_mdio_pdata[port].enabled = be32_to_cpup(addr);
-+
-+	pdata->ls1012a_mdio_pdata[port].irq[0] = PHY_POLL;
-+
-+done:
-+
-+	return 0;
-+
-+err:
-+	return -1;
-+}
-+
-+/*
-+ *
-+ * pfe_platform_probe -
-+ *
-+ *
-+ */
-+static int pfe_platform_probe(struct platform_device *pdev)
-+{
-+	struct resource res;
-+	int ii, rc, interface_count = 0, size = 0;
-+	const u32 *prop;
-+	struct device_node  *np;
-+	struct clk *pfe_clk;
-+
-+	np = pdev->dev.of_node;
-+
-+	if (!np) {
-+		pr_err("Invalid device node\n");
-+		return -EINVAL;
-+	}
-+
-+	pfe = kzalloc(sizeof(*pfe), GFP_KERNEL);
-+	if (!pfe) {
-+		rc = -ENOMEM;
-+		goto err_alloc;
-+	}
-+
-+	platform_set_drvdata(pdev, pfe);
-+
-+	dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
-+
-+	if (of_address_to_resource(np, 1, &res)) {
-+		rc = -ENOMEM;
-+		pr_err("failed to get ddr resource\n");
-+		goto err_ddr;
-+	}
-+
-+	pfe->ddr_phys_baseaddr = res.start;
-+	pfe->ddr_size = resource_size(&res);
-+
-+	pfe->ddr_baseaddr = phys_to_virt(res.start);
-+	if (!pfe->ddr_baseaddr) {
-+		pr_err("ioremap() ddr failed\n");
-+		rc = -ENOMEM;
-+		goto err_ddr;
-+	}
-+
-+	pfe->scfg =
-+		syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+						"fsl,pfe-scfg");
-+	if (IS_ERR(pfe->scfg)) {
-+		dev_err(&pdev->dev, "No syscfg phandle specified\n");
-+		return PTR_ERR(pfe->scfg);
-+	}
-+
-+	pfe->cbus_baseaddr = of_iomap(np, 0);
-+	if (!pfe->cbus_baseaddr) {
-+		rc = -ENOMEM;
-+		pr_err("failed to get axi resource\n");
-+		goto err_axi;
-+	}
-+
-+	pfe->hif_irq = platform_get_irq(pdev, 0);
-+	if (pfe->hif_irq < 0) {
-+		pr_err("platform_get_irq for hif failed\n");
-+		rc = pfe->hif_irq;
-+		goto err_hif_irq;
-+	}
-+
-+	pfe->wol_irq = platform_get_irq(pdev, 2);
-+	if (pfe->wol_irq < 0) {
-+		pr_err("platform_get_irq for WoL failed\n");
-+		rc = pfe->wol_irq;
-+		goto err_hif_irq;
-+	}
-+
-+	/* Read interface count */
-+	prop = of_get_property(np, "fsl,pfe-num-interfaces", &size);
-+	if (!prop) {
-+		pr_err("Failed to read number of interfaces\n");
-+		rc = -ENXIO;
-+		goto err_prop;
-+	}
-+
-+	interface_count = be32_to_cpup(prop);
-+	if (interface_count <= 0) {
-+		pr_err("No ethernet interface count : %d\n",
-+		       interface_count);
-+		rc = -ENXIO;
-+		goto err_prop;
-+	}
-+
-+	pfe_platform_data.ls1012a_mdio_pdata[0].phy_mask = 0xffffffff;
-+
-+	for (ii = 0; ii < interface_count; ii++) {
-+		pfe_get_gemac_if_proprties(np, ii, interface_count,
-+					   &pfe_platform_data);
-+	}
-+
-+	pfe->dev = &pdev->dev;
-+
-+	pfe->dev->platform_data = &pfe_platform_data;
-+
-+	/* declare WoL capabilities */
-+	device_init_wakeup(&pdev->dev, true);
-+
-+	/* find the clocks */
-+	pfe_clk = devm_clk_get(pfe->dev, "pfe");
-+	if (IS_ERR(pfe_clk))
-+		return PTR_ERR(pfe_clk);
-+
-+	/* PFE clock is (platform clock / 2) */
-+	/* save sys_clk value as KHz */
-+	pfe->ctrl.sys_clk = clk_get_rate(pfe_clk) / (2 * 1000);
-+
-+	rc = pfe_probe(pfe);
-+	if (rc < 0)
-+		goto err_probe;
-+
-+	return 0;
-+
-+err_probe:
-+err_prop:
-+err_hif_irq:
-+	iounmap(pfe->cbus_baseaddr);
-+
-+err_axi:
-+	iounmap(pfe->ddr_baseaddr);
-+
-+err_ddr:
-+	platform_set_drvdata(pdev, NULL);
-+
-+	kfree(pfe);
-+
-+err_alloc:
-+	return rc;
-+}
-+
-+/*
-+ * pfe_platform_remove -
-+ */
-+static int pfe_platform_remove(struct platform_device *pdev)
-+{
-+	struct pfe *pfe = platform_get_drvdata(pdev);
-+	int rc;
-+
-+	pr_info("%s\n", __func__);
-+
-+	rc = pfe_remove(pfe);
-+
-+	iounmap(pfe->cbus_baseaddr);
-+	iounmap(pfe->ddr_baseaddr);
-+
-+	platform_set_drvdata(pdev, NULL);
-+
-+	kfree(pfe);
-+
-+	return rc;
-+}
-+
-+#ifdef CONFIG_PM
-+#ifdef CONFIG_PM_SLEEP
-+int pfe_platform_suspend(struct device *dev)
-+{
-+	struct pfe *pfe = platform_get_drvdata(to_platform_device(dev));
-+	struct net_device *netdev;
-+	int i;
-+
-+	pfe->wake = 0;
-+
-+	for (i = 0; i < (NUM_GEMAC_SUPPORT); i++) {
-+		netdev = pfe->eth.eth_priv[i]->ndev;
-+
-+		netif_device_detach(netdev);
-+
-+		if (netif_running(netdev))
-+			if (pfe_eth_suspend(netdev))
-+				pfe->wake = 1;
-+	}
-+
-+	/* Shutdown PFE only if we're not waking up the system */
-+	if (!pfe->wake) {
-+#if defined(LS1012A_PFE_RESET_WA)
-+		pfe_hif_rx_idle(&pfe->hif);
-+#endif
-+		pfe_ctrl_suspend(&pfe->ctrl);
-+		pfe_firmware_exit(pfe);
-+
-+		pfe_hif_exit(pfe);
-+		pfe_hif_lib_exit(pfe);
-+
-+		pfe_hw_exit(pfe);
-+	}
-+
-+	return 0;
-+}
-+
-+static int pfe_platform_resume(struct device *dev)
-+{
-+	struct pfe *pfe = platform_get_drvdata(to_platform_device(dev));
-+	struct net_device *netdev;
-+	int i;
-+
-+	if (!pfe->wake) {
-+		pfe_hw_init(pfe, 1);
-+		pfe_hif_lib_init(pfe);
-+		pfe_hif_init(pfe);
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+		util_enable();
-+#endif
-+		tmu_enable(0xf);
-+		class_enable();
-+		pfe_ctrl_resume(&pfe->ctrl);
-+	}
-+
-+	for (i = 0; i < (NUM_GEMAC_SUPPORT); i++) {
-+		netdev = pfe->eth.eth_priv[i]->ndev;
-+
-+		if (pfe->eth.eth_priv[i]->mii_bus)
-+			pfe_eth_mdio_reset(pfe->eth.eth_priv[i]->mii_bus);
-+
-+		if (netif_running(netdev))
-+			pfe_eth_resume(netdev);
-+
-+		netif_device_attach(netdev);
-+	}
-+	return 0;
-+}
-+#else
-+#define pfe_platform_suspend NULL
-+#define pfe_platform_resume NULL
-+#endif
-+
-+static const struct dev_pm_ops pfe_platform_pm_ops = {
-+	SET_SYSTEM_SLEEP_PM_OPS(pfe_platform_suspend, pfe_platform_resume)
-+};
-+#endif
-+
-+static const struct of_device_id pfe_match[] = {
-+	{
-+		.compatible = "fsl,pfe",
-+	},
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, pfe_match);
-+
-+static struct platform_driver pfe_platform_driver = {
-+	.probe = pfe_platform_probe,
-+	.remove = pfe_platform_remove,
-+	.driver = {
-+		.name = "pfe",
-+		.of_match_table = pfe_match,
-+#ifdef CONFIG_PM
-+		.pm = &pfe_platform_pm_ops,
-+#endif
-+	},
-+};
-+
-+module_platform_driver(pfe_platform_driver);
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("PFE Ethernet driver");
-+MODULE_AUTHOR("NXP DNCPE");
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_mod.c
-@@ -0,0 +1,141 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/dma-mapping.h>
-+#include "pfe_mod.h"
-+
-+struct pfe *pfe;
-+
-+/*
-+ * pfe_probe -
-+ */
-+int pfe_probe(struct pfe *pfe)
-+{
-+	int rc;
-+
-+	if (pfe->ddr_size < DDR_MAX_SIZE) {
-+		pr_err("%s: required DDR memory (%x) above platform ddr memory (%x)\n",
-+		       __func__, (unsigned int)DDR_MAX_SIZE, pfe->ddr_size);
-+		rc = -ENOMEM;
-+		goto err_hw;
-+	}
-+
-+	if (((int)(pfe->ddr_phys_baseaddr + BMU2_DDR_BASEADDR) &
-+			(8 * SZ_1M - 1)) != 0) {
-+		pr_err("%s: BMU2 base address (0x%x) must be aligned on 8MB boundary\n",
-+		       __func__, (int)pfe->ddr_phys_baseaddr +
-+			BMU2_DDR_BASEADDR);
-+		rc = -ENOMEM;
-+		goto err_hw;
-+	}
-+
-+	pr_info("cbus_baseaddr: %lx, ddr_baseaddr: %lx, ddr_phys_baseaddr: %lx, ddr_size: %x\n",
-+		(unsigned long)pfe->cbus_baseaddr,
-+		(unsigned long)pfe->ddr_baseaddr,
-+		pfe->ddr_phys_baseaddr, pfe->ddr_size);
-+
-+	pfe_lib_init(pfe->cbus_baseaddr, pfe->ddr_baseaddr,
-+		     pfe->ddr_phys_baseaddr, pfe->ddr_size);
-+
-+	rc = pfe_hw_init(pfe, 0);
-+	if (rc < 0)
-+		goto err_hw;
-+
-+	rc = pfe_hif_lib_init(pfe);
-+	if (rc < 0)
-+		goto err_hif_lib;
-+
-+	rc = pfe_hif_init(pfe);
-+	if (rc < 0)
-+		goto err_hif;
-+
-+	rc = pfe_firmware_init(pfe);
-+	if (rc < 0)
-+		goto err_firmware;
-+
-+	rc = pfe_ctrl_init(pfe);
-+	if (rc < 0)
-+		goto err_ctrl;
-+
-+	rc = pfe_eth_init(pfe);
-+	if (rc < 0)
-+		goto err_eth;
-+
-+	rc = pfe_sysfs_init(pfe);
-+	if (rc < 0)
-+		goto err_sysfs;
-+
-+	rc = pfe_debugfs_init(pfe);
-+	if (rc < 0)
-+		goto err_debugfs;
-+
-+	return 0;
-+
-+err_debugfs:
-+	pfe_sysfs_exit(pfe);
-+
-+err_sysfs:
-+	pfe_eth_exit(pfe);
-+
-+err_eth:
-+	pfe_ctrl_exit(pfe);
-+
-+err_ctrl:
-+	pfe_firmware_exit(pfe);
-+
-+err_firmware:
-+	pfe_hif_exit(pfe);
-+
-+err_hif:
-+	pfe_hif_lib_exit(pfe);
-+
-+err_hif_lib:
-+	pfe_hw_exit(pfe);
-+
-+err_hw:
-+	return rc;
-+}
-+
-+/*
-+ * pfe_remove -
-+ */
-+int pfe_remove(struct pfe *pfe)
-+{
-+	pr_info("%s\n", __func__);
-+
-+	pfe_debugfs_exit(pfe);
-+
-+	pfe_sysfs_exit(pfe);
-+
-+	pfe_eth_exit(pfe);
-+
-+	pfe_ctrl_exit(pfe);
-+
-+#if defined(LS1012A_PFE_RESET_WA)
-+	pfe_hif_rx_idle(&pfe->hif);
-+#endif
-+	pfe_firmware_exit(pfe);
-+
-+	pfe_hif_exit(pfe);
-+
-+	pfe_hif_lib_exit(pfe);
-+
-+	pfe_hw_exit(pfe);
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_sysfs.c
-@@ -0,0 +1,818 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include "pfe_mod.h"
-+
-+#define PE_EXCEPTION_DUMP_ADDRESS 0x1fa8
-+#define NUM_QUEUES		16
-+
-+static char register_name[20][5] = {
-+	"EPC", "ECAS", "EID", "ED",
-+	"r0", "r1", "r2", "r3",
-+	"r4", "r5", "r6", "r7",
-+	"r8", "r9", "r10", "r11",
-+	"r12", "r13", "r14", "r15",
-+};
-+
-+static char exception_name[14][20] = {
-+	"Reset",
-+	"HardwareFailure",
-+	"NMI",
-+	"InstBreakpoint",
-+	"DataBreakpoint",
-+	"Unsupported",
-+	"PrivilegeViolation",
-+	"InstBusError",
-+	"DataBusError",
-+	"AlignmentError",
-+	"ArithmeticError",
-+	"SystemCall",
-+	"MemoryManagement",
-+	"Interrupt",
-+};
-+
-+static unsigned long class_do_clear;
-+static unsigned long tmu_do_clear;
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+static unsigned long util_do_clear;
-+#endif
-+
-+static ssize_t display_pe_status(char *buf, int id, u32 dmem_addr, unsigned long
-+					do_clear)
-+{
-+	ssize_t len = 0;
-+	u32 val;
-+	char statebuf[5];
-+	struct pfe_cpumon *cpumon = &pfe->cpumon;
-+	u32 debug_indicator;
-+	u32 debug[20];
-+
-+	*(u32 *)statebuf = pe_dmem_read(id, dmem_addr, 4);
-+	dmem_addr += 4;
-+
-+	statebuf[4] = '\0';
-+	len += sprintf(buf + len, "state=%4s ", statebuf);
-+
-+	val = pe_dmem_read(id, dmem_addr, 4);
-+	dmem_addr += 4;
-+	len += sprintf(buf + len, "ctr=%08x ", cpu_to_be32(val));
-+
-+	val = pe_dmem_read(id, dmem_addr, 4);
-+	if (do_clear && val)
-+		pe_dmem_write(id, 0, dmem_addr, 4);
-+	dmem_addr += 4;
-+	len += sprintf(buf + len, "rx=%u ", cpu_to_be32(val));
-+
-+	val = pe_dmem_read(id, dmem_addr, 4);
-+	if (do_clear && val)
-+		pe_dmem_write(id, 0, dmem_addr, 4);
-+	dmem_addr += 4;
-+	if (id >= TMU0_ID && id <= TMU_MAX_ID)
-+		len += sprintf(buf + len, "qstatus=%x", cpu_to_be32(val));
-+	else
-+		len += sprintf(buf + len, "tx=%u", cpu_to_be32(val));
-+
-+	val = pe_dmem_read(id, dmem_addr, 4);
-+	if (do_clear && val)
-+		pe_dmem_write(id, 0, dmem_addr, 4);
-+	dmem_addr += 4;
-+	if (val)
-+		len += sprintf(buf + len, " drop=%u", cpu_to_be32(val));
-+
-+	len += sprintf(buf + len, " load=%d%%", cpumon->cpu_usage_pct[id]);
-+
-+	len += sprintf(buf + len, "\n");
-+
-+	debug_indicator = pe_dmem_read(id, dmem_addr, 4);
-+	dmem_addr += 4;
-+	if (!strncmp((char *)&debug_indicator, "DBUG", 4)) {
-+		int j, last = 0;
-+
-+		for (j = 0; j < 16; j++) {
-+			debug[j] = pe_dmem_read(id, dmem_addr, 4);
-+			if (debug[j]) {
-+				if (do_clear)
-+					pe_dmem_write(id, 0, dmem_addr, 4);
-+				last = j + 1;
-+			}
-+			dmem_addr += 4;
-+		}
-+		for (j = 0; j < last; j++) {
-+			len += sprintf(buf + len, "%08x%s",
-+			cpu_to_be32(debug[j]),
-+			(j & 0x7) == 0x7 || j == last - 1 ? "\n" : " ");
-+		}
-+	}
-+
-+	if (!strncmp(statebuf, "DEAD", 4)) {
-+		u32 i, dump = PE_EXCEPTION_DUMP_ADDRESS;
-+
-+		len += sprintf(buf + len, "Exception details:\n");
-+		for (i = 0; i < 20; i++) {
-+			debug[i] = pe_dmem_read(id, dump, 4);
-+			dump += 4;
-+			if (i == 2)
-+				len += sprintf(buf + len, "%4s = %08x (=%s) ",
-+				register_name[i], cpu_to_be32(debug[i]),
-+				exception_name[min((u32)
-+				cpu_to_be32(debug[i]), (u32)13)]);
-+			else
-+				len += sprintf(buf + len, "%4s = %08x%s",
-+				register_name[i], cpu_to_be32(debug[i]),
-+				(i & 0x3) == 0x3 || i == 19 ? "\n" : " ");
-+		}
-+	}
-+
-+	return len;
-+}
-+
-+static ssize_t class_phy_stats(char *buf, int phy)
-+{
-+	ssize_t len = 0;
-+	int off1 = phy * 0x28;
-+	int off2 = phy * 0x10;
-+
-+	if (phy == 3)
-+		off1 = CLASS_PHY4_RX_PKTS - CLASS_PHY1_RX_PKTS;
-+
-+	len += sprintf(buf + len, "phy: %d\n", phy);
-+	len += sprintf(buf + len,
-+			"  rx:   %10u, tx:   %10u, intf:  %10u, ipv4:    %10u, ipv6: %10u\n",
-+			readl(CLASS_PHY1_RX_PKTS + off1),
-+			readl(CLASS_PHY1_TX_PKTS + off1),
-+			readl(CLASS_PHY1_INTF_MATCH_PKTS + off1),
-+			readl(CLASS_PHY1_V4_PKTS + off1),
-+			readl(CLASS_PHY1_V6_PKTS + off1));
-+
-+	len += sprintf(buf + len,
-+			"  icmp: %10u, igmp: %10u, tcp:   %10u, udp:     %10u\n",
-+			readl(CLASS_PHY1_ICMP_PKTS + off2),
-+			readl(CLASS_PHY1_IGMP_PKTS + off2),
-+			readl(CLASS_PHY1_TCP_PKTS + off2),
-+			readl(CLASS_PHY1_UDP_PKTS + off2));
-+
-+	len += sprintf(buf + len, "  err\n");
-+	len += sprintf(buf + len,
-+			"  lp:   %10u, intf: %10u, l3:    %10u, chcksum: %10u, ttl:  %10u\n",
-+			readl(CLASS_PHY1_LP_FAIL_PKTS + off1),
-+			readl(CLASS_PHY1_INTF_FAIL_PKTS + off1),
-+			readl(CLASS_PHY1_L3_FAIL_PKTS + off1),
-+			readl(CLASS_PHY1_CHKSUM_ERR_PKTS + off1),
-+			readl(CLASS_PHY1_TTL_ERR_PKTS + off1));
-+
-+	return len;
-+}
-+
-+/* qm_read_drop_stat
-+ * This function is used to read the drop statistics from the TMU
-+ * hw drop counter.  Since the hw counter is always cleared afer
-+ * reading, this function maintains the previous drop count, and
-+ * adds the new value to it.  That value can be retrieved by
-+ * passing a pointer to it with the total_drops arg.
-+ *
-+ * @param tmu		TMU number (0 - 3)
-+ * @param queue		queue number (0 - 15)
-+ * @param total_drops	pointer to location to store total drops (or NULL)
-+ * @param do_reset	if TRUE, clear total drops after updating
-+ */
-+u32 qm_read_drop_stat(u32 tmu, u32 queue, u32 *total_drops, int do_reset)
-+{
-+	static u32 qtotal[TMU_MAX_ID + 1][NUM_QUEUES];
-+	u32 val;
-+
-+	writel((tmu << 8) | queue, TMU_TEQ_CTRL);
-+	writel((tmu << 8) | queue, TMU_LLM_CTRL);
-+	val = readl(TMU_TEQ_DROP_STAT);
-+	qtotal[tmu][queue] += val;
-+	if (total_drops)
-+		*total_drops = qtotal[tmu][queue];
-+	if (do_reset)
-+		qtotal[tmu][queue] = 0;
-+	return val;
-+}
-+
-+static ssize_t tmu_queue_stats(char *buf, int tmu, int queue)
-+{
-+	ssize_t len = 0;
-+	u32 drops;
-+
-+	len += sprintf(buf + len, "%d-%02d, ", tmu, queue);
-+
-+	drops = qm_read_drop_stat(tmu, queue, NULL, 0);
-+
-+	/* Select queue */
-+	writel((tmu << 8) | queue, TMU_TEQ_CTRL);
-+	writel((tmu << 8) | queue, TMU_LLM_CTRL);
-+
-+	len += sprintf(buf + len,
-+			"(teq) drop: %10u, tx: %10u (llm) head: %08x, tail: %08x, drop: %10u\n",
-+		drops, readl(TMU_TEQ_TRANS_STAT),
-+		readl(TMU_LLM_QUE_HEADPTR), readl(TMU_LLM_QUE_TAILPTR),
-+		readl(TMU_LLM_QUE_DROPCNT));
-+
-+	return len;
-+}
-+
-+static ssize_t tmu_queues(char *buf, int tmu)
-+{
-+	ssize_t len = 0;
-+	int queue;
-+
-+	for (queue = 0; queue < 16; queue++)
-+		len += tmu_queue_stats(buf + len, tmu, queue);
-+
-+	return len;
-+}
-+
-+static ssize_t block_version(char *buf, void *addr)
-+{
-+	ssize_t len = 0;
-+	u32 val;
-+
-+	val = readl(addr);
-+	len += sprintf(buf + len, "revision: %x, version: %x, id: %x\n",
-+		(val >> 24) & 0xff, (val >> 16) & 0xff, val & 0xffff);
-+
-+	return len;
-+}
-+
-+static ssize_t bmu(char *buf, int id, void *base)
-+{
-+	ssize_t len = 0;
-+
-+	len += sprintf(buf + len, "%s: %d\n  ", __func__, id);
-+
-+	len += block_version(buf + len, base + BMU_VERSION);
-+
-+	len += sprintf(buf + len, "  buf size:  %x\n", (1 << readl(base +
-+			BMU_BUF_SIZE)));
-+	len += sprintf(buf + len, "  buf count: %x\n", readl(base +
-+			BMU_BUF_CNT));
-+	len += sprintf(buf + len, "  buf rem:   %x\n", readl(base +
-+			BMU_REM_BUF_CNT));
-+	len += sprintf(buf + len, "  buf curr:  %x\n", readl(base +
-+			BMU_CURR_BUF_CNT));
-+	len += sprintf(buf + len, "  free err:  %x\n", readl(base +
-+			BMU_FREE_ERR_ADDR));
-+
-+	return len;
-+}
-+
-+static ssize_t gpi(char *buf, int id, void *base)
-+{
-+	ssize_t len = 0;
-+	u32 val;
-+
-+	len += sprintf(buf + len, "%s%d:\n  ", __func__, id);
-+	len += block_version(buf + len, base + GPI_VERSION);
-+
-+	len += sprintf(buf + len, "  tx under stick: %x\n", readl(base +
-+			GPI_FIFO_STATUS));
-+	val = readl(base + GPI_FIFO_DEBUG);
-+	len += sprintf(buf + len, "  tx pkts:        %x\n", (val >> 23) &
-+			0x3f);
-+	len += sprintf(buf + len, "  rx pkts:        %x\n", (val >> 18) &
-+			0x3f);
-+	len += sprintf(buf + len, "  tx bytes:       %x\n", (val >> 9) &
-+			0x1ff);
-+	len += sprintf(buf + len, "  rx bytes:       %x\n", (val >> 0) &
-+			0x1ff);
-+	len += sprintf(buf + len, "  overrun:        %x\n", readl(base +
-+			GPI_OVERRUN_DROPCNT));
-+
-+	return len;
-+}
-+
-+static ssize_t pfe_set_class(struct device *dev, struct device_attribute *attr,
-+			     const char *buf, size_t count)
-+{
-+	class_do_clear = kstrtoul(buf, 0, 0);
-+	return count;
-+}
-+
-+static ssize_t pfe_show_class(struct device *dev, struct device_attribute *attr,
-+			      char *buf)
-+{
-+	ssize_t len = 0;
-+	int id;
-+	u32 val;
-+	struct pfe_cpumon *cpumon = &pfe->cpumon;
-+
-+	len += block_version(buf + len, CLASS_VERSION);
-+
-+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) {
-+		len += sprintf(buf + len, "%d: ", id - CLASS0_ID);
-+
-+		val = readl(CLASS_PE0_DEBUG + id * 4);
-+		len += sprintf(buf + len, "pc=1%04x ", val & 0xffff);
-+
-+		len += display_pe_status(buf + len, id, CLASS_DM_PESTATUS,
-+						class_do_clear);
-+	}
-+	len += sprintf(buf + len, "aggregate load=%d%%\n\n",
-+			cpumon->class_usage_pct);
-+
-+	len += sprintf(buf + len, "pe status:   0x%x\n",
-+			readl(CLASS_PE_STATUS));
-+	len += sprintf(buf + len, "max buf cnt: 0x%x   afull thres: 0x%x\n",
-+			readl(CLASS_MAX_BUF_CNT), readl(CLASS_AFULL_THRES));
-+	len += sprintf(buf + len, "tsq max cnt: 0x%x   tsq fifo thres: 0x%x\n",
-+			readl(CLASS_TSQ_MAX_CNT), readl(CLASS_TSQ_FIFO_THRES));
-+	len += sprintf(buf + len, "state:       0x%x\n", readl(CLASS_STATE));
-+
-+	len += class_phy_stats(buf + len, 0);
-+	len += class_phy_stats(buf + len, 1);
-+	len += class_phy_stats(buf + len, 2);
-+	len += class_phy_stats(buf + len, 3);
-+
-+	return len;
-+}
-+
-+static ssize_t pfe_set_tmu(struct device *dev, struct device_attribute *attr,
-+			   const char *buf, size_t count)
-+{
-+	tmu_do_clear = kstrtoul(buf, 0, 0);
-+	return count;
-+}
-+
-+static ssize_t pfe_show_tmu(struct device *dev, struct device_attribute *attr,
-+			    char *buf)
-+{
-+	ssize_t len = 0;
-+	int id;
-+	u32 val;
-+
-+	len += block_version(buf + len, TMU_VERSION);
-+
-+	for (id = TMU0_ID; id <= TMU_MAX_ID; id++) {
-+		if (id == TMU2_ID)
-+			continue;
-+		len += sprintf(buf + len, "%d: ", id - TMU0_ID);
-+
-+		len += display_pe_status(buf + len, id, TMU_DM_PESTATUS,
-+						tmu_do_clear);
-+	}
-+
-+	len += sprintf(buf + len, "pe status:    %x\n", readl(TMU_PE_STATUS));
-+	len += sprintf(buf + len, "inq fifo cnt: %x\n",
-+			readl(TMU_PHY_INQ_FIFO_CNT));
-+	val = readl(TMU_INQ_STAT);
-+	len += sprintf(buf + len, "inq wr ptr:     %x\n", val & 0x3ff);
-+	len += sprintf(buf + len, "inq rd ptr:     %x\n", val >> 10);
-+
-+	return len;
-+}
-+
-+static unsigned long drops_do_clear;
-+static u32 class_drop_counter[CLASS_NUM_DROP_COUNTERS];
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+static u32 util_drop_counter[UTIL_NUM_DROP_COUNTERS];
-+#endif
-+
-+char *class_drop_description[CLASS_NUM_DROP_COUNTERS] = {
-+	"ICC",
-+	"Host Pkt Error",
-+	"Rx Error",
-+	"IPsec Outbound",
-+	"IPsec Inbound",
-+	"EXPT IPsec Error",
-+	"Reassembly",
-+	"Fragmenter",
-+	"NAT-T",
-+	"Socket",
-+	"Multicast",
-+	"NAT-PT",
-+	"Tx Disabled",
-+};
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+char *util_drop_description[UTIL_NUM_DROP_COUNTERS] = {
-+	"IPsec Outbound",
-+	"IPsec Inbound",
-+	"IPsec Rate Limiter",
-+	"Fragmenter",
-+	"Socket",
-+	"Tx Disabled",
-+	"Rx Error",
-+};
-+#endif
-+
-+static ssize_t pfe_set_drops(struct device *dev, struct device_attribute *attr,
-+			     const char *buf, size_t count)
-+{
-+	drops_do_clear = kstrtoul(buf, 0, 0);
-+	return count;
-+}
-+
-+static u32 tmu_drops[4][16];
-+static ssize_t pfe_show_drops(struct device *dev, struct device_attribute *attr,
-+			      char *buf)
-+{
-+	ssize_t len = 0;
-+	int id, dropnum;
-+	int tmu, queue;
-+	u32 val;
-+	u32 dmem_addr;
-+	int num_class_drops = 0, num_tmu_drops = 0, num_util_drops = 0;
-+	struct pfe_ctrl *ctrl = &pfe->ctrl;
-+
-+	memset(class_drop_counter, 0, sizeof(class_drop_counter));
-+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) {
-+		if (drops_do_clear)
-+			pe_sync_stop(ctrl, (1 << id));
-+		for (dropnum = 0; dropnum < CLASS_NUM_DROP_COUNTERS;
-+			dropnum++) {
-+			dmem_addr = CLASS_DM_DROP_CNTR;
-+			val = be32_to_cpu(pe_dmem_read(id, dmem_addr, 4));
-+			class_drop_counter[dropnum] += val;
-+			num_class_drops += val;
-+			if (drops_do_clear)
-+				pe_dmem_write(id, 0, dmem_addr, 4);
-+		}
-+		if (drops_do_clear)
-+			pe_start(ctrl, (1 << id));
-+	}
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	if (drops_do_clear)
-+		pe_sync_stop(ctrl, (1 << UTIL_ID));
-+	for (dropnum = 0; dropnum < UTIL_NUM_DROP_COUNTERS; dropnum++) {
-+		dmem_addr = UTIL_DM_DROP_CNTR;
-+		val = be32_to_cpu(pe_dmem_read(UTIL_ID, dmem_addr, 4));
-+		util_drop_counter[dropnum] = val;
-+		num_util_drops += val;
-+		if (drops_do_clear)
-+			pe_dmem_write(UTIL_ID, 0, dmem_addr, 4);
-+	}
-+	if (drops_do_clear)
-+		pe_start(ctrl, (1 << UTIL_ID));
-+#endif
-+	for (tmu = 0; tmu < 4; tmu++) {
-+		for (queue = 0; queue < 16; queue++) {
-+			qm_read_drop_stat(tmu, queue, &tmu_drops[tmu][queue],
-+					  drops_do_clear);
-+			num_tmu_drops += tmu_drops[tmu][queue];
-+		}
-+	}
-+
-+	if (num_class_drops == 0 && num_util_drops == 0 && num_tmu_drops == 0)
-+		len += sprintf(buf + len, "No PE drops\n\n");
-+
-+	if (num_class_drops > 0) {
-+		len += sprintf(buf + len, "Class PE drops --\n");
-+		for (dropnum = 0; dropnum < CLASS_NUM_DROP_COUNTERS;
-+			dropnum++) {
-+			if (class_drop_counter[dropnum] > 0)
-+				len += sprintf(buf + len, "  %s: %d\n",
-+					class_drop_description[dropnum],
-+					class_drop_counter[dropnum]);
-+		}
-+		len += sprintf(buf + len, "\n");
-+	}
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	if (num_util_drops > 0) {
-+		len += sprintf(buf + len, "Util PE drops --\n");
-+		for (dropnum = 0; dropnum < UTIL_NUM_DROP_COUNTERS; dropnum++) {
-+			if (util_drop_counter[dropnum] > 0)
-+				len += sprintf(buf + len, "  %s: %d\n",
-+					util_drop_description[dropnum],
-+					util_drop_counter[dropnum]);
-+		}
-+		len += sprintf(buf + len, "\n");
-+	}
-+#endif
-+	if (num_tmu_drops > 0) {
-+		len += sprintf(buf + len, "TMU drops --\n");
-+		for (tmu = 0; tmu < 4; tmu++) {
-+			for (queue = 0; queue < 16; queue++) {
-+				if (tmu_drops[tmu][queue] > 0)
-+					len += sprintf(buf + len,
-+						"  TMU%d-Q%d: %d\n"
-+					, tmu, queue, tmu_drops[tmu][queue]);
-+			}
-+		}
-+		len += sprintf(buf + len, "\n");
-+	}
-+
-+	return len;
-+}
-+
-+static ssize_t pfe_show_tmu0_queues(struct device *dev, struct device_attribute
-+					*attr, char *buf)
-+{
-+	return tmu_queues(buf, 0);
-+}
-+
-+static ssize_t pfe_show_tmu1_queues(struct device *dev, struct device_attribute
-+					*attr, char *buf)
-+{
-+	return tmu_queues(buf, 1);
-+}
-+
-+static ssize_t pfe_show_tmu2_queues(struct device *dev, struct device_attribute
-+					*attr, char *buf)
-+{
-+	return tmu_queues(buf, 2);
-+}
-+
-+static ssize_t pfe_show_tmu3_queues(struct device *dev, struct device_attribute
-+					*attr, char *buf)
-+{
-+	return tmu_queues(buf, 3);
-+}
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+static ssize_t pfe_set_util(struct device *dev, struct device_attribute *attr,
-+			    const char *buf, size_t count)
-+{
-+	util_do_clear = kstrtoul(buf, NULL, 0);
-+	return count;
-+}
-+
-+static ssize_t pfe_show_util(struct device *dev, struct device_attribute *attr,
-+			     char *buf)
-+{
-+	ssize_t len = 0;
-+	struct pfe_ctrl *ctrl = &pfe->ctrl;
-+
-+	len += block_version(buf + len, UTIL_VERSION);
-+
-+	pe_sync_stop(ctrl, (1 << UTIL_ID));
-+	len += display_pe_status(buf + len, UTIL_ID, UTIL_DM_PESTATUS,
-+					util_do_clear);
-+	pe_start(ctrl, (1 << UTIL_ID));
-+
-+	len += sprintf(buf + len, "pe status:   %x\n", readl(UTIL_PE_STATUS));
-+	len += sprintf(buf + len, "max buf cnt: %x\n",
-+			readl(UTIL_MAX_BUF_CNT));
-+	len += sprintf(buf + len, "tsq max cnt: %x\n",
-+			readl(UTIL_TSQ_MAX_CNT));
-+
-+	return len;
-+}
-+#endif
-+
-+static ssize_t pfe_show_bmu(struct device *dev, struct device_attribute *attr,
-+			    char *buf)
-+{
-+	ssize_t len = 0;
-+
-+	len += bmu(buf + len, 1, BMU1_BASE_ADDR);
-+	len += bmu(buf + len, 2, BMU2_BASE_ADDR);
-+
-+	return len;
-+}
-+
-+static ssize_t pfe_show_hif(struct device *dev, struct device_attribute *attr,
-+			    char *buf)
-+{
-+	ssize_t len = 0;
-+
-+	len += sprintf(buf + len, "hif:\n  ");
-+	len += block_version(buf + len, HIF_VERSION);
-+
-+	len += sprintf(buf + len, "  tx curr bd:    %x\n",
-+			readl(HIF_TX_CURR_BD_ADDR));
-+	len += sprintf(buf + len, "  tx status:     %x\n",
-+			readl(HIF_TX_STATUS));
-+	len += sprintf(buf + len, "  tx dma status: %x\n",
-+			readl(HIF_TX_DMA_STATUS));
-+
-+	len += sprintf(buf + len, "  rx curr bd:    %x\n",
-+			readl(HIF_RX_CURR_BD_ADDR));
-+	len += sprintf(buf + len, "  rx status:     %x\n",
-+			readl(HIF_RX_STATUS));
-+	len += sprintf(buf + len, "  rx dma status: %x\n",
-+			readl(HIF_RX_DMA_STATUS));
-+
-+	len += sprintf(buf + len, "hif nocopy:\n  ");
-+	len += block_version(buf + len, HIF_NOCPY_VERSION);
-+
-+	len += sprintf(buf + len, "  tx curr bd:    %x\n",
-+			readl(HIF_NOCPY_TX_CURR_BD_ADDR));
-+	len += sprintf(buf + len, "  tx status:     %x\n",
-+			readl(HIF_NOCPY_TX_STATUS));
-+	len += sprintf(buf + len, "  tx dma status: %x\n",
-+			readl(HIF_NOCPY_TX_DMA_STATUS));
-+
-+	len += sprintf(buf + len, "  rx curr bd:    %x\n",
-+			readl(HIF_NOCPY_RX_CURR_BD_ADDR));
-+	len += sprintf(buf + len, "  rx status:     %x\n",
-+			readl(HIF_NOCPY_RX_STATUS));
-+	len += sprintf(buf + len, "  rx dma status: %x\n",
-+			readl(HIF_NOCPY_RX_DMA_STATUS));
-+
-+	return len;
-+}
-+
-+static ssize_t pfe_show_gpi(struct device *dev, struct device_attribute *attr,
-+			    char *buf)
-+{
-+	ssize_t len = 0;
-+
-+	len += gpi(buf + len, 0, EGPI1_BASE_ADDR);
-+	len += gpi(buf + len, 1, EGPI2_BASE_ADDR);
-+	len += gpi(buf + len, 3, HGPI_BASE_ADDR);
-+
-+	return len;
-+}
-+
-+static ssize_t pfe_show_pfemem(struct device *dev, struct device_attribute
-+				*attr, char *buf)
-+{
-+	ssize_t len = 0;
-+	struct pfe_memmon *memmon = &pfe->memmon;
-+
-+	len += sprintf(buf + len, "Kernel Memory: %d Bytes (%d KB)\n",
-+		memmon->kernel_memory_allocated,
-+		(memmon->kernel_memory_allocated + 1023) / 1024);
-+
-+	return len;
-+}
-+
-+#ifdef HIF_NAPI_STATS
-+static ssize_t pfe_show_hif_napi_stats(struct device *dev,
-+				       struct device_attribute *attr,
-+				       char *buf)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct pfe *pfe = platform_get_drvdata(pdev);
-+	ssize_t len = 0;
-+
-+	len += sprintf(buf + len, "sched:  %u\n",
-+			pfe->hif.napi_counters[NAPI_SCHED_COUNT]);
-+	len += sprintf(buf + len, "poll:   %u\n",
-+			pfe->hif.napi_counters[NAPI_POLL_COUNT]);
-+	len += sprintf(buf + len, "packet: %u\n",
-+			pfe->hif.napi_counters[NAPI_PACKET_COUNT]);
-+	len += sprintf(buf + len, "budget: %u\n",
-+			pfe->hif.napi_counters[NAPI_FULL_BUDGET_COUNT]);
-+	len += sprintf(buf + len, "desc:   %u\n",
-+			pfe->hif.napi_counters[NAPI_DESC_COUNT]);
-+	len += sprintf(buf + len, "full:   %u\n",
-+			pfe->hif.napi_counters[NAPI_CLIENT_FULL_COUNT]);
-+
-+	return len;
-+}
-+
-+static ssize_t pfe_set_hif_napi_stats(struct device *dev,
-+				      struct device_attribute *attr,
-+					const char *buf, size_t count)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct pfe *pfe = platform_get_drvdata(pdev);
-+
-+	memset(pfe->hif.napi_counters, 0, sizeof(pfe->hif.napi_counters));
-+
-+	return count;
-+}
-+
-+static DEVICE_ATTR(hif_napi_stats, 0644, pfe_show_hif_napi_stats,
-+			pfe_set_hif_napi_stats);
-+#endif
-+
-+static DEVICE_ATTR(class, 0644, pfe_show_class, pfe_set_class);
-+static DEVICE_ATTR(tmu, 0644, pfe_show_tmu, pfe_set_tmu);
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+static DEVICE_ATTR(util, 0644, pfe_show_util, pfe_set_util);
-+#endif
-+static DEVICE_ATTR(bmu, 0444, pfe_show_bmu, NULL);
-+static DEVICE_ATTR(hif, 0444, pfe_show_hif, NULL);
-+static DEVICE_ATTR(gpi, 0444, pfe_show_gpi, NULL);
-+static DEVICE_ATTR(drops, 0644, pfe_show_drops, pfe_set_drops);
-+static DEVICE_ATTR(tmu0_queues, 0444, pfe_show_tmu0_queues, NULL);
-+static DEVICE_ATTR(tmu1_queues, 0444, pfe_show_tmu1_queues, NULL);
-+static DEVICE_ATTR(tmu2_queues, 0444, pfe_show_tmu2_queues, NULL);
-+static DEVICE_ATTR(tmu3_queues, 0444, pfe_show_tmu3_queues, NULL);
-+static DEVICE_ATTR(pfemem, 0444, pfe_show_pfemem, NULL);
-+
-+int pfe_sysfs_init(struct pfe *pfe)
-+{
-+	if (device_create_file(pfe->dev, &dev_attr_class))
-+		goto err_class;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_tmu))
-+		goto err_tmu;
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	if (device_create_file(pfe->dev, &dev_attr_util))
-+		goto err_util;
-+#endif
-+
-+	if (device_create_file(pfe->dev, &dev_attr_bmu))
-+		goto err_bmu;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_hif))
-+		goto err_hif;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_gpi))
-+		goto err_gpi;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_drops))
-+		goto err_drops;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_tmu0_queues))
-+		goto err_tmu0_queues;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_tmu1_queues))
-+		goto err_tmu1_queues;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_tmu2_queues))
-+		goto err_tmu2_queues;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_tmu3_queues))
-+		goto err_tmu3_queues;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_pfemem))
-+		goto err_pfemem;
-+
-+#ifdef HIF_NAPI_STATS
-+	if (device_create_file(pfe->dev, &dev_attr_hif_napi_stats))
-+		goto err_hif_napi_stats;
-+#endif
-+
-+	return 0;
-+
-+#ifdef HIF_NAPI_STATS
-+err_hif_napi_stats:
-+	device_remove_file(pfe->dev, &dev_attr_pfemem);
-+#endif
-+
-+err_pfemem:
-+	device_remove_file(pfe->dev, &dev_attr_tmu3_queues);
-+
-+err_tmu3_queues:
-+	device_remove_file(pfe->dev, &dev_attr_tmu2_queues);
-+
-+err_tmu2_queues:
-+	device_remove_file(pfe->dev, &dev_attr_tmu1_queues);
-+
-+err_tmu1_queues:
-+	device_remove_file(pfe->dev, &dev_attr_tmu0_queues);
-+
-+err_tmu0_queues:
-+	device_remove_file(pfe->dev, &dev_attr_drops);
-+
-+err_drops:
-+	device_remove_file(pfe->dev, &dev_attr_gpi);
-+
-+err_gpi:
-+	device_remove_file(pfe->dev, &dev_attr_hif);
-+
-+err_hif:
-+	device_remove_file(pfe->dev, &dev_attr_bmu);
-+
-+err_bmu:
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	device_remove_file(pfe->dev, &dev_attr_util);
-+
-+err_util:
-+#endif
-+	device_remove_file(pfe->dev, &dev_attr_tmu);
-+
-+err_tmu:
-+	device_remove_file(pfe->dev, &dev_attr_class);
-+
-+err_class:
-+	return -1;
-+}
-+
-+void pfe_sysfs_exit(struct pfe *pfe)
-+{
-+#ifdef HIF_NAPI_STATS
-+	device_remove_file(pfe->dev, &dev_attr_hif_napi_stats);
-+#endif
-+	device_remove_file(pfe->dev, &dev_attr_pfemem);
-+	device_remove_file(pfe->dev, &dev_attr_tmu3_queues);
-+	device_remove_file(pfe->dev, &dev_attr_tmu2_queues);
-+	device_remove_file(pfe->dev, &dev_attr_tmu1_queues);
-+	device_remove_file(pfe->dev, &dev_attr_tmu0_queues);
-+	device_remove_file(pfe->dev, &dev_attr_drops);
-+	device_remove_file(pfe->dev, &dev_attr_gpi);
-+	device_remove_file(pfe->dev, &dev_attr_hif);
-+	device_remove_file(pfe->dev, &dev_attr_bmu);
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	device_remove_file(pfe->dev, &dev_attr_util);
-+#endif
-+	device_remove_file(pfe->dev, &dev_attr_tmu);
-+	device_remove_file(pfe->dev, &dev_attr_class);
-+}
diff --git a/target/linux/layerscape/patches-5.4/701-net-0287-staging-fsl_ppfe-eth-fix-RGMII-tx-delay-issue.patch b/target/linux/layerscape/patches-5.4/701-net-0287-staging-fsl_ppfe-eth-fix-RGMII-tx-delay-issue.patch
deleted file mode 100644
index 47dc87dbf2..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0287-staging-fsl_ppfe-eth-fix-RGMII-tx-delay-issue.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From b62abd01cce8c4548d380d4ff28984a0275ea8fb Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Wed, 11 Oct 2017 19:23:38 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: fix RGMII tx delay issue
-
-Recently logic to enable RGMII tx delay was changed by
-below patch.
-
-https://patchwork.kernel.org/patch/9447581/
-
-Based on the patch, appropriate change is made in PFE driver.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -1068,7 +1068,8 @@ static void pfe_eth_adjust_link(struct n
- 			new_state = 1;
- 			gemac_set_speed(priv->EMAC_baseaddr,
- 					pfe_get_phydev_speed(phydev));
--			if (priv->einfo->mii_config == PHY_INTERFACE_MODE_RGMII)
-+			if (priv->einfo->mii_config ==
-+					PHY_INTERFACE_MODE_RGMII_TXID)
- 				pfe_set_rgmii_speed(phydev);
- 			priv->oldspeed = phydev->speed;
- 		}
diff --git a/target/linux/layerscape/patches-5.4/701-net-0288-staging-fsl_ppfe-eth-remove-unused-functions.patch b/target/linux/layerscape/patches-5.4/701-net-0288-staging-fsl_ppfe-eth-remove-unused-functions.patch
deleted file mode 100644
index 2e9f4900f4..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0288-staging-fsl_ppfe-eth-remove-unused-functions.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From accfaecbbcb882dcc2d47660a644c353ae337861 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Wed, 18 Oct 2017 14:29:30 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: remove unused functions
-
-Remove unused functions hif_xmit_pkt & hif_lib_xmit_pkt.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_hif.c     | 24 +-----------------------
- drivers/staging/fsl_ppfe/pfe_hif_lib.c | 34 ----------------------------------
- 2 files changed, 1 insertion(+), 57 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_hif.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hif.c
-@@ -844,29 +844,6 @@ skip_tx:
- 	return;
- }
- 
--int hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int q_no,
--		 void *data, unsigned int len)
--{
--	int rc = 0;
--
--	spin_lock_bh(&hif->tx_lock);
--
--	if (!hif->txavail) {
--		rc = 1;
--	} else {
--		__hif_xmit_pkt(hif, client_id, q_no, data, len,
--			       HIF_FIRST_BUFFER | HIF_LAST_BUFFER);
--		hif_tx_dma_start();
--	}
--
--	if (hif->txavail < (hif->tx_ring_size >> 1))
--		__hif_tx_done_process(hif, TX_FREE_MAX_COUNT);
--
--	spin_unlock_bh(&hif->tx_lock);
--
--	return rc;
--}
--
- static irqreturn_t wol_isr(int irq, void *dev_id)
- {
- 	pr_info("WoL\n");
-@@ -907,6 +884,7 @@ static irqreturn_t hif_isr(int irq, void
- 			__napi_schedule(&hif->napi);
- 		}
- 	}
-+
- 	if (int_status & HIF_TXPKT_INT) {
- 		int_status &= ~(HIF_TXPKT_INT);
- 		int_enable_mask &= ~(HIF_TXPKT_INT);
---- a/drivers/staging/fsl_ppfe/pfe_hif_lib.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.c
-@@ -512,40 +512,6 @@ void __hif_lib_xmit_pkt(struct hif_clien
- 	queue->jiffies_last_packet = jiffies;
- }
- 
--/*This function puts the given packet in the specific client queue */
--int hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void *data,
--		     unsigned int len, u32 client_ctrl, void *client_data)
--{
--	struct hif_client_tx_queue *queue = &client->tx_q[qno];
--	struct tx_queue_desc *desc = queue->base + queue->write_idx;
--
--	if (queue->tx_pending < queue->size) {
--		/*Construct pkt header */
--
--		data -= sizeof(struct hif_hdr);
--		len += sizeof(struct hif_hdr);
--
--		hif_hdr_write(data, client->id, qno, client_ctrl);
--
--		desc->data = client_data;
--		desc->ctrl = CL_DESC_OWN | CL_DESC_FLAGS(HIF_FIRST_BUFFER |
--				HIF_LAST_BUFFER | HIF_DATA_VALID);
--
--		if (hif_xmit_pkt(&pfe->hif, client->id, qno, data, len))
--			return 1;
--
--		inc_cl_idx(queue->write_idx);
--		queue->tx_pending++;
--		queue->jiffies_last_packet = jiffies;
--
--		return 0;
--	}
--
--	pr_debug("%s Tx client %d qno %d is full\n", __func__, client->id,
--		 qno);
--	return 1;
--}
--
- void *hif_lib_tx_get_next_complete(struct hif_client_s *client, int qno,
- 				   unsigned int *flags, int count)
- {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0289-staging-fsl_ppfe-eth-fix-read-write-ack-idx-issue.patch b/target/linux/layerscape/patches-5.4/701-net-0289-staging-fsl_ppfe-eth-fix-read-write-ack-idx-issue.patch
deleted file mode 100644
index 4ed5b04f50..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0289-staging-fsl_ppfe-eth-fix-read-write-ack-idx-issue.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From f44630f1e12462921245feb91fe94d225ba90f9c Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Wed, 18 Oct 2017 18:34:41 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: fix read/write/ack idx issue
-
-While fixing checkpatch errors some of the index increments
-were commented out. They are enabled.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_hif.c     | 8 ++++----
- drivers/staging/fsl_ppfe/pfe_hif_lib.c | 9 +++------
- 2 files changed, 7 insertions(+), 10 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_hif.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hif.c
-@@ -511,9 +511,9 @@ static void *client_put_rxpacket(struct
- 			 */
- 			smp_wmb();
- 			writel(CL_DESC_BUF_LEN(len) | flags, &desc->ctrl);
--			/* queue->write_idx = (queue->write_idx + 1)
--			 *		       & (queue->size - 1);
--			 */
-+			queue->write_idx = (queue->write_idx + 1)
-+					    & (queue->size - 1);
-+
- 			free_pkt += pfe_pkt_headroom;
- 		}
- 	}
-@@ -703,7 +703,7 @@ static int client_ack_txpacket(struct pf
- 
- 	if (readl(&desc->ctrl) & CL_DESC_OWN) {
- 		writel((readl(&desc->ctrl) & ~CL_DESC_OWN), &desc->ctrl);
--		/* queue->ack_idx = (queue->ack_idx + 1) & (queue->size - 1); */
-+		queue->ack_idx = (queue->ack_idx + 1) & (queue->size - 1);
- 
- 		return 0;
- 
---- a/drivers/staging/fsl_ppfe/pfe_hif_lib.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.c
-@@ -211,9 +211,6 @@ err:
- 	return 1;
- }
- 
--#define inc_cl_idx(idxname)					\
--	({ typeof(idxname) idxname_ = (idxname);		\
--	((idxname_) = (idxname_ + 1) & (queue->size - 1)); })
- 
- static void hif_lib_client_cleanup_tx_queue(struct hif_client_tx_queue *queue)
- {
-@@ -465,7 +462,7 @@ void *hif_lib_receive_pkt(struct hif_cli
- 		smp_wmb();
- 
- 		desc->ctrl = CL_DESC_BUF_LEN(pfe_pkt_size) | CL_DESC_OWN;
--		inc_cl_idx(queue->read_idx);
-+		queue->read_idx = (queue->read_idx + 1) & (queue->size - 1);
- 	}
- 
- 	/*spin_unlock_irqrestore(&client->rx_lock, flags); */
-@@ -507,7 +504,7 @@ void __hif_lib_xmit_pkt(struct hif_clien
- 
- 	__hif_xmit_pkt(&pfe->hif, client->id, qno, data, len, flags);
- 
--	inc_cl_idx(queue->write_idx);
-+	queue->write_idx = (queue->write_idx + 1) & (queue->size - 1);
- 	queue->tx_pending++;
- 	queue->jiffies_last_packet = jiffies;
- }
-@@ -544,7 +541,7 @@ void *hif_lib_tx_get_next_complete(struc
- 	if (desc->ctrl & CL_DESC_OWN)
- 		return NULL;
- 
--	inc_cl_idx(queue->read_idx);
-+	queue->read_idx = (queue->read_idx + 1) & (queue->size - 1);
- 	queue->tx_pending--;
- 
- 	*flags = CL_DESC_GET_FLAGS(desc->ctrl);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0290-staging-fsl_ppfe-eth-Make-phy_ethtool_ksettings_get-.patch b/target/linux/layerscape/patches-5.4/701-net-0290-staging-fsl_ppfe-eth-Make-phy_ethtool_ksettings_get-.patch
deleted file mode 100644
index 59b15fff15..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0290-staging-fsl_ppfe-eth-Make-phy_ethtool_ksettings_get-.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 48d54be45c3b8735f90792e6480e7d6cf0ec1586 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Fri, 27 Oct 2017 11:20:47 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: Make phy_ethtool_ksettings_get return
- void
-
-Make return value void since function never return meaningful value
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -577,7 +577,9 @@ static int pfe_eth_get_settings(struct n
- 	if (!phydev)
- 		return -ENODEV;
- 
--	return phy_ethtool_ksettings_get(phydev, cmd);
-+	phy_ethtool_ksettings_get(phydev, cmd);
-+
-+	return 0;
- }
- 
- /*
diff --git a/target/linux/layerscape/patches-5.4/701-net-0291-staging-fsl_ppfe-eth-add-function-to-update-tmu-cred.patch b/target/linux/layerscape/patches-5.4/701-net-0291-staging-fsl_ppfe-eth-add-function-to-update-tmu-cred.patch
deleted file mode 100644
index 72152bf786..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0291-staging-fsl_ppfe-eth-add-function-to-update-tmu-cred.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From cc230f5618174506889f98ac6b79e72ac9d9d9e4 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Wed, 15 Nov 2017 13:45:27 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: add function to update tmu credits
-
-__hif_lib_update_credit function is used to update the tmu credits.
-If tx_qos is set, tmu credit is updated based on the number of packets
-transmitted by tmu.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_hif_lib.c | 33 +++++++++++++++++++++++++++++++++
- drivers/staging/fsl_ppfe/pfe_hif_lib.h |  1 +
- 2 files changed, 34 insertions(+)
-
---- a/drivers/staging/fsl_ppfe/pfe_hif_lib.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.c
-@@ -565,6 +565,39 @@ static void hif_lib_tmu_credit_init(stru
- 		}
- }
- 
-+/* __hif_lib_update_credit
-+ *
-+ * @param[in] client	hif client context
-+ * @param[in] queue	queue number in match with TMU
-+ */
-+void __hif_lib_update_credit(struct hif_client_s *client, unsigned int queue)
-+{
-+	unsigned int tmu_tx_packets, tmp;
-+
-+	if (tx_qos) {
-+		tmu_tx_packets = be32_to_cpu(pe_dmem_read(TMU0_ID +
-+			client->id, TMU_DM_TX_TRANS, 4));
-+
-+		/* tx_packets counter overflowed */
-+		if (tmu_tx_packets >
-+		    pfe->tmu_credit.tx_packets[client->id][queue]) {
-+			tmp = UINT_MAX - tmu_tx_packets +
-+			pfe->tmu_credit.tx_packets[client->id][queue];
-+
-+			pfe->tmu_credit.tx_credit[client->id][queue] =
-+			pfe->tmu_credit.tx_credit_max[client->id][queue] - tmp;
-+		} else {
-+		/* TMU tx <= pfe_eth tx, normal case or both OF since
-+		 * last time
-+		 */
-+			pfe->tmu_credit.tx_credit[client->id][queue] =
-+			pfe->tmu_credit.tx_credit_max[client->id][queue] -
-+			(pfe->tmu_credit.tx_packets[client->id][queue] -
-+			tmu_tx_packets);
-+		}
-+	}
-+}
-+
- int pfe_hif_lib_init(struct pfe *pfe)
- {
- 	int rc;
---- a/drivers/staging/fsl_ppfe/pfe_hif_lib.h
-+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.h
-@@ -185,6 +185,7 @@ void *hif_lib_tx_get_next_complete(struc
- void *hif_lib_receive_pkt(struct hif_client_s *client, int qno, int *len, int
- 				*ofst, unsigned int *rx_ctrl,
- 				unsigned int *desc_ctrl, void **priv_data);
-+void __hif_lib_update_credit(struct hif_client_s *client, unsigned int queue);
- void hif_lib_set_rx_cpu_affinity(struct hif_client_s *client, int cpu_id);
- void hif_lib_set_tx_queue_nocpy(struct hif_client_s *client, int qno, int
- 					enable);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0292-staging-fsl_ppfe-eth-Avoid-packet-drop-at-TMU-queues.patch b/target/linux/layerscape/patches-5.4/701-net-0292-staging-fsl_ppfe-eth-Avoid-packet-drop-at-TMU-queues.patch
deleted file mode 100644
index eeea3740dd..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0292-staging-fsl_ppfe-eth-Avoid-packet-drop-at-TMU-queues.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 8b99b4595d2b5f4d0b2252b16de83572e03b337a Mon Sep 17 00:00:00 2001
-From: Kavi Akhila-B46177 <akhila.kavi@nxp.com>
-Date: Thu, 2 Nov 2017 12:05:35 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: Avoid packet drop at TMU queues
-
-Added flow control between TMU queues and PFE Linux driver,
-based on TMU credits availability.
-Added tx_qos module parameter to control this behavior.
-Use queue-0 as default queue to transmit packets.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-Signed-off-by: Akhila Kavi <akhila.kavi@nxp.com>
-Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c     | 17 +++++++++++++----
- drivers/staging/fsl_ppfe/pfe_hif_lib.c |  7 +++++--
- 2 files changed, 18 insertions(+), 6 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -293,10 +293,10 @@ static int pfe_eth_sysfs_init(struct net
- 	/* Initialize the default values */
- 
- 	/*
--	 * By default, packets without conntrack will use this default high
-+	 * By default, packets without conntrack will use this default low
- 	 * priority queue
- 	 */
--	priv->default_priority = 15;
-+	priv->default_priority = 0;
- 
- 	/* Create our sysfs files */
- 	err = device_create_file(&ndev->dev, &dev_attr_default_priority);
-@@ -1566,10 +1566,17 @@ static int pfe_eth_might_stop_tx(struct
- 				 unsigned int n_segs)
- {
- 	ktime_t kt;
-+	int tried = 0;
- 
-+try_again:
- 	if (unlikely((__hif_tx_avail(&pfe->hif) < n_desc) ||
--		     (hif_lib_tx_avail(&priv->client, queuenum) < n_desc) ||
-+	(hif_lib_tx_avail(&priv->client, queuenum) < n_desc) ||
- 	(hif_lib_tx_credit_avail(pfe, priv->id, queuenum) < n_segs))) {
-+		if (!tried) {
-+			__hif_lib_update_credit(&priv->client, queuenum);
-+			tried = 1;
-+			goto try_again;
-+		}
- #ifdef PFE_ETH_TX_STATS
- 		if (__hif_tx_avail(&pfe->hif) < n_desc) {
- 			priv->stop_queue_hif[queuenum]++;
-@@ -1692,8 +1699,10 @@ static void pfe_eth_flush_tx(struct pfe_
- 
- 	netif_info(priv, tx_done, priv->ndev, "%s\n", __func__);
- 
--	for (ii = 0; ii < emac_txq_cnt; ii++)
-+	for (ii = 0; ii < emac_txq_cnt; ii++) {
- 		pfe_eth_flush_txQ(priv, ii, 0, 0);
-+		__hif_lib_update_credit(&priv->client, ii);
-+	}
- }
- 
- void pfe_tx_get_req_desc(struct sk_buff *skb, unsigned int *n_desc, unsigned int
---- a/drivers/staging/fsl_ppfe/pfe_hif_lib.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.c
-@@ -34,7 +34,10 @@
- 
- unsigned int lro_mode;
- unsigned int page_mode;
--unsigned int tx_qos;
-+unsigned int tx_qos = 1;
-+module_param(tx_qos, uint, 0444);
-+MODULE_PARM_DESC(tx_qos, "0: disable ,\n"
-+			 "1: enable (default), guarantee no packet drop at TMU level\n");
- unsigned int pfe_pkt_size;
- unsigned int pfe_pkt_headroom;
- unsigned int emac_txq_cnt;
-@@ -576,7 +579,7 @@ void __hif_lib_update_credit(struct hif_
- 
- 	if (tx_qos) {
- 		tmu_tx_packets = be32_to_cpu(pe_dmem_read(TMU0_ID +
--			client->id, TMU_DM_TX_TRANS, 4));
-+			client->id, (TMU_DM_TX_TRANS + (queue * 4)), 4));
- 
- 		/* tx_packets counter overflowed */
- 		if (tmu_tx_packets >
diff --git a/target/linux/layerscape/patches-5.4/701-net-0293-staging-fsl_ppfe-eth-Enable-PFE-in-clause-45-mode.patch b/target/linux/layerscape/patches-5.4/701-net-0293-staging-fsl_ppfe-eth-Enable-PFE-in-clause-45-mode.patch
deleted file mode 100644
index dac3a93721..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0293-staging-fsl_ppfe-eth-Enable-PFE-in-clause-45-mode.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 666f91f706c167b061ec29f45936a9f24e86e55c Mon Sep 17 00:00:00 2001
-From: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-Date: Wed, 29 Nov 2017 12:08:00 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: Enable PFE in clause 45 mode
-
-when we opearate in clause 45 mode, we need to call
-the function get_phy_device() with its 3rd argument as
-"true" and then the resultant phy device needs to be
-register with phy layer via phy_device_register()
-
-Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c | 32 +++++++++++++++++++++++++++++---
- 1 file changed, 29 insertions(+), 3 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -923,7 +923,8 @@ static int pfe_eth_mdio_init(struct pfe_
- 			     struct ls1012a_mdio_platform_data *minfo)
- {
- 	struct mii_bus *bus;
--	int rc;
-+	int rc, ii;
-+	struct phy_device *phydev;
- 
- 	netif_info(priv, drv, priv->ndev, "%s\n", __func__);
- 	pr_info("%s\n", __func__);
-@@ -962,6 +963,31 @@ static int pfe_eth_mdio_init(struct pfe_
- 	}
- 
- 	priv->mii_bus = bus;
-+
-+	/* For clause 45 we need to call get_phy_device() with it's
-+	 * 3rd argument as true and then register the phy device
-+	 * via phy_device_register()
-+	 */
-+
-+	if (priv->einfo->mii_config == PHY_INTERFACE_MODE_2500SGMII) {
-+		for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) {
-+			phydev = get_phy_device(priv->mii_bus,
-+					priv->einfo->phy_id + ii, true);
-+			if (!phydev || IS_ERR(phydev)) {
-+				rc = -EIO;
-+				netdev_err(priv->ndev, "fail to get device\n");
-+				goto err1;
-+			}
-+			rc = phy_device_register(phydev);
-+			if (rc) {
-+				phy_device_free(phydev);
-+				netdev_err(priv->ndev,
-+					"phy_device_register() failed\n");
-+				goto err1;
-+			}
-+		}
-+	}
-+
- 	pfe_eth_mdio_reset(bus);
- 
- 	return 0;
-@@ -1149,7 +1175,7 @@ static void ls1012a_configure_serdes(str
- 	int sgmii_2500 = 0;
- 	struct mii_bus *bus = priv->mii_bus;
- 
--	if (priv->einfo->mii_config == PHY_INTERFACE_MODE_SGMII_2500)
-+	if (priv->einfo->mii_config == PHY_INTERFACE_MODE_2500SGMII)
- 		sgmii_2500 = 1;
- 
- 	netif_info(priv, drv, ndev, "%s\n", __func__);
-@@ -1198,7 +1224,7 @@ static int pfe_phy_init(struct net_devic
- 	netif_info(priv, drv, ndev, "%s: %s\n", __func__, phy_id);
- 	interface = priv->einfo->mii_config;
- 	if ((interface == PHY_INTERFACE_MODE_SGMII) ||
--	    (interface == PHY_INTERFACE_MODE_SGMII_2500)) {
-+	    (interface == PHY_INTERFACE_MODE_2500SGMII)) {
- 		/*Configure SGMII PCS */
- 		if (pfe->scfg) {
- 			/*Config MDIO from serdes */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0294-staging-fsl_ppfe-eth-Disable-autonegotiation-for-2.5.patch b/target/linux/layerscape/patches-5.4/701-net-0294-staging-fsl_ppfe-eth-Disable-autonegotiation-for-2.5.patch
deleted file mode 100644
index 3c0abc812d..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0294-staging-fsl_ppfe-eth-Disable-autonegotiation-for-2.5.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From caae8a691922c3702fcb813f5d794f311c0609c6 Mon Sep 17 00:00:00 2001
-From: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-Date: Wed, 29 Nov 2017 12:21:43 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: Disable autonegotiation for 2.5G SGMII
-
-PCS initialization sequence for 2.5G SGMII interface governs
-auto negotiation to be in disabled mode
-
-Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -1174,6 +1174,7 @@ static void ls1012a_configure_serdes(str
- 	struct pfe_eth_priv_s *priv = pfe->eth.eth_priv[0];
- 	int sgmii_2500 = 0;
- 	struct mii_bus *bus = priv->mii_bus;
-+	u16 value = 0;
- 
- 	if (priv->einfo->mii_config == PHY_INTERFACE_MODE_2500SGMII)
- 		sgmii_2500 = 1;
-@@ -1191,14 +1192,16 @@ static void ls1012a_configure_serdes(str
- 		pfe_eth_mdio_write(bus, 0, 0x4, 0x4001);
- 		pfe_eth_mdio_write(bus, 0, 0x12, 0xa120);
- 		pfe_eth_mdio_write(bus, 0, 0x13, 0x7);
-+		/* Autonegotiation need to be disabled for 2.5G SGMII mode*/
-+		value = 0x0140;
-+		pfe_eth_mdio_write(bus, 0, 0x0, value);
- 	} else {
- 		pfe_eth_mdio_write(bus, 0, 0x14, 0xb);
- 		pfe_eth_mdio_write(bus, 0, 0x4, 0x1a1);
- 		pfe_eth_mdio_write(bus, 0, 0x12, 0x400);
- 		pfe_eth_mdio_write(bus, 0, 0x13, 0x0);
-+		pfe_eth_mdio_write(bus, 0, 0x0, 0x1140);
- 	}
--
--	pfe_eth_mdio_write(bus, 0, 0x0, 0x1140);
- }
- 
- /*
diff --git a/target/linux/layerscape/patches-5.4/701-net-0295-staging-fsl_ppfe-eth-calculate-PFE_PKT_SIZE-with-SKB.patch b/target/linux/layerscape/patches-5.4/701-net-0295-staging-fsl_ppfe-eth-calculate-PFE_PKT_SIZE-with-SKB.patch
deleted file mode 100644
index f42ec78f09..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0295-staging-fsl_ppfe-eth-calculate-PFE_PKT_SIZE-with-SKB.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 2f59069dbb48ee86bee42bf36a4dfafe64028344 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Thu, 8 Mar 2018 13:58:38 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: calculate PFE_PKT_SIZE with
- SKB_DATA_ALIGN
-
-pfe packet size was calculated without considering skb data alignment
-and this resulted in jumbo frames crashing kernel when the
-cacheline size increased from 64 to 128 bytes with
-commit 97303480753e ("arm64: Increase the max granular size").
-
-Modify pfe packet size caclulation to include skb data alignment of
-sizeof(struct skb_shared_info).
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_hif_lib.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_hif_lib.h
-+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.h
-@@ -146,7 +146,7 @@ struct tx_queue_desc {
- #define PFE_BUF_SIZE		2048
- #define PFE_PKT_HEADROOM	128
- 
--#define SKB_SHARED_INFO_SIZE   (sizeof(struct skb_shared_info))
-+#define SKB_SHARED_INFO_SIZE   SKB_DATA_ALIGN(sizeof(struct skb_shared_info))
- #define PFE_PKT_SIZE		(PFE_BUF_SIZE - PFE_PKT_HEADROOM \
- 				 - SKB_SHARED_INFO_SIZE)
- #define MAX_L2_HDR_SIZE		14	/* Not correct for VLAN/PPPoE */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0296-staging-fsl_ppfe-eth-support-for-userspace-networkin.patch b/target/linux/layerscape/patches-5.4/701-net-0296-staging-fsl_ppfe-eth-support-for-userspace-networkin.patch
deleted file mode 100644
index b3f3fe91b3..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0296-staging-fsl_ppfe-eth-support-for-userspace-networkin.patch
+++ /dev/null
@@ -1,155 +0,0 @@
-From 25d189ea016270d1d7ab67eafc57bc8989b5381c Mon Sep 17 00:00:00 2001
-From: Akhil Goyal <akhil.goyal@nxp.com>
-Date: Fri, 13 Apr 2018 15:41:28 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: support for userspace networking
-
-This patch adds the userspace mode support to fsl_ppfe network driver.
-In the new mode, basic hardware initialization is performed in kernel, while
-the datapath and HIF handling is the responsibility of the userspace.
-
-The new command line parameter is added to initialize the ppfe module
-in userspace mode. By default the module remains in kernelspace networking
-mode.
-To enable userspace mode, use "insmod pfe.ko us=1"
-
-Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
-Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c | 21 +++++++++++++++++++--
- drivers/staging/fsl_ppfe/pfe_mod.c | 15 +++++++++++++++
- drivers/staging/fsl_ppfe/pfe_mod.h |  2 ++
- 3 files changed, 36 insertions(+), 2 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -2296,6 +2296,8 @@ static int pfe_eth_init_one(struct pfe *
- 		goto err0;
- 	}
- 
-+	if (us)
-+		emac_txq_cnt = EMAC_TXQ_CNT;
- 	/* Create an ethernet device instance */
- 	ndev = alloc_etherdev_mq(sizeof(*priv), emac_txq_cnt);
- 
-@@ -2342,6 +2344,9 @@ static int pfe_eth_init_one(struct pfe *
- 		}
- 	}
- 
-+	if (us)
-+		goto phy_init;
-+
- 	ndev->mtu = 1500;
- 
- 	/* Set MTU limits */
-@@ -2381,6 +2386,8 @@ static int pfe_eth_init_one(struct pfe *
- 		netdev_err(ndev, "register_netdev() failed\n");
- 		goto err3;
- 	}
-+
-+phy_init:
- 	device_init_wakeup(&ndev->dev, WAKE_MAGIC);
- 
- 	if (!(priv->einfo->phy_flags & GEMAC_NO_PHY)) {
-@@ -2392,6 +2399,12 @@ static int pfe_eth_init_one(struct pfe *
- 		}
- 	}
- 
-+	if (us) {
-+		if (priv->phydev)
-+			phy_start(priv->phydev);
-+		return 0;
-+	}
-+
- 	netif_carrier_on(ndev);
- 
- 	/* Create all the sysfs files */
-@@ -2403,6 +2416,8 @@ static int pfe_eth_init_one(struct pfe *
- 
- 	return 0;
- err4:
-+	if (us)
-+		goto err3;
- 	unregister_netdev(ndev);
- err3:
- 	pfe_eth_mdio_exit(priv->mii_bus);
-@@ -2449,9 +2464,11 @@ static void pfe_eth_exit_one(struct pfe_
- {
- 	netif_info(priv, probe, priv->ndev, "%s\n", __func__);
- 
--	pfe_eth_sysfs_exit(priv->ndev);
-+	if (!us) {
-+		pfe_eth_sysfs_exit(priv->ndev);
- 
--	unregister_netdev(priv->ndev);
-+		unregister_netdev(priv->ndev);
-+	}
- 
- 	if (!(priv->einfo->phy_flags & GEMAC_NO_PHY))
- 		pfe_phy_exit(priv->ndev);
---- a/drivers/staging/fsl_ppfe/pfe_mod.c
-+++ b/drivers/staging/fsl_ppfe/pfe_mod.c
-@@ -19,6 +19,10 @@
- #include <linux/dma-mapping.h>
- #include "pfe_mod.h"
- 
-+unsigned int us;
-+module_param(us, uint, 0444);
-+MODULE_PARM_DESC(us, "0: module enabled for kernel networking (DEFAULT)\n"
-+			"1: module enabled for userspace networking\n");
- struct pfe *pfe;
- 
- /*
-@@ -56,6 +60,9 @@ int pfe_probe(struct pfe *pfe)
- 	if (rc < 0)
- 		goto err_hw;
- 
-+	if (us)
-+		goto firmware_init;
-+
- 	rc = pfe_hif_lib_init(pfe);
- 	if (rc < 0)
- 		goto err_hif_lib;
-@@ -64,6 +71,7 @@ int pfe_probe(struct pfe *pfe)
- 	if (rc < 0)
- 		goto err_hif;
- 
-+firmware_init:
- 	rc = pfe_firmware_init(pfe);
- 	if (rc < 0)
- 		goto err_firmware;
-@@ -99,6 +107,9 @@ err_ctrl:
- 	pfe_firmware_exit(pfe);
- 
- err_firmware:
-+	if (us)
-+		goto err_hif_lib;
-+
- 	pfe_hif_exit(pfe);
- 
- err_hif:
-@@ -131,10 +142,14 @@ int pfe_remove(struct pfe *pfe)
- #endif
- 	pfe_firmware_exit(pfe);
- 
-+	if (us)
-+		goto hw_exit;
-+
- 	pfe_hif_exit(pfe);
- 
- 	pfe_hif_lib_exit(pfe);
- 
-+hw_exit:
- 	pfe_hw_exit(pfe);
- 
- 	return 0;
---- a/drivers/staging/fsl_ppfe/pfe_mod.h
-+++ b/drivers/staging/fsl_ppfe/pfe_mod.h
-@@ -22,6 +22,8 @@
- #include <linux/device.h>
- #include <linux/elf.h>
- 
-+extern unsigned int us;
-+
- struct pfe;
- 
- #include "pfe_hw.h"
diff --git a/target/linux/layerscape/patches-5.4/701-net-0297-staging-fsl_ppfe-eth-unregister-netdev-after-pfe_phy.patch b/target/linux/layerscape/patches-5.4/701-net-0297-staging-fsl_ppfe-eth-unregister-netdev-after-pfe_phy.patch
deleted file mode 100644
index 0731329384..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0297-staging-fsl_ppfe-eth-unregister-netdev-after-pfe_phy.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 4ebb4e490dd924d1a8ca7fe693a0dd1cfa150687 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Mon, 30 Apr 2018 11:40:01 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: unregister netdev after pfe_phy_exit
-
-rmmod pfe.ko throws below warning:
-
-kernfs: can not remove 'phydev', no directory
-------------[ cut here ]------------
-WARNING: CPU: 0 PID: 2230 at fs/kernfs/dir.c:1481
-kernfs_remove_by_name_ns+0x90/0xa0
-
-This is caused when the unregistered netdev structure is accessed to
-disconnect phy.
-
-Resolve the issue by unregistering netdev after disconnecting phy.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -2464,15 +2464,15 @@ static void pfe_eth_exit_one(struct pfe_
- {
- 	netif_info(priv, probe, priv->ndev, "%s\n", __func__);
- 
--	if (!us) {
-+	if (!us)
- 		pfe_eth_sysfs_exit(priv->ndev);
- 
--		unregister_netdev(priv->ndev);
--	}
--
- 	if (!(priv->einfo->phy_flags & GEMAC_NO_PHY))
- 		pfe_phy_exit(priv->ndev);
- 
-+	if (!us)
-+		unregister_netdev(priv->ndev);
-+
- 	if (priv->mii_bus)
- 		pfe_eth_mdio_exit(priv->mii_bus);
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0298-staging-fsl_ppfe-eth-HW-parse-results-for-DPDK.patch b/target/linux/layerscape/patches-5.4/701-net-0298-staging-fsl_ppfe-eth-HW-parse-results-for-DPDK.patch
deleted file mode 100644
index f8ec3495a2..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0298-staging-fsl_ppfe-eth-HW-parse-results-for-DPDK.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From fd2bdf555ab192a96a44fa02f701095b24448d47 Mon Sep 17 00:00:00 2001
-From: anuj batham <anuj.batham@nxp.com>
-Date: Fri, 27 Apr 2018 14:38:09 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: HW parse results for DPDK
-
-HW Parse results are included in the packet headroom.
-Length and Offset calculation now accommodates parse info size.
-
-Signed-off-by: Archana Madhavan <archana.madhavan@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_hif_lib.c | 7 +++++--
- drivers/staging/fsl_ppfe/pfe_hif_lib.h | 1 +
- 2 files changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_hif_lib.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.c
-@@ -435,6 +435,7 @@ void *hif_lib_receive_pkt(struct hif_cli
- 			u16 size = *rx_ctrl >> HIF_CTRL_RX_OFFSET_OFST;
- 
- 			if (size) {
-+				size += PFE_PARSE_INFO_SIZE;
- 				*len = CL_DESC_BUF_LEN(desc->ctrl) -
- 						PFE_PKT_HEADER_SZ - size;
- 				*ofst = pfe_pkt_headroom + PFE_PKT_HEADER_SZ
-@@ -442,8 +443,10 @@ void *hif_lib_receive_pkt(struct hif_cli
- 				*priv_data = desc->data + PFE_PKT_HEADER_SZ;
- 			} else {
- 				*len = CL_DESC_BUF_LEN(desc->ctrl) -
--						PFE_PKT_HEADER_SZ;
--				*ofst = pfe_pkt_headroom + PFE_PKT_HEADER_SZ;
-+				       PFE_PKT_HEADER_SZ - PFE_PARSE_INFO_SIZE;
-+				*ofst = pfe_pkt_headroom
-+					+ PFE_PKT_HEADER_SZ
-+					+ PFE_PARSE_INFO_SIZE;
- 				*priv_data = NULL;
- 			}
- 
---- a/drivers/staging/fsl_ppfe/pfe_hif_lib.h
-+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.h
-@@ -23,6 +23,7 @@
- 
- #define HIF_CL_REQ_TIMEOUT	10
- #define GFP_DMA_PFE 0
-+#define PFE_PARSE_INFO_SIZE	16
- 
- enum {
- 	REQUEST_CL_REGISTER = 0,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0299-staging-fsl_ppfe-eth-reorganize-pfe_netdev_ops.patch b/target/linux/layerscape/patches-5.4/701-net-0299-staging-fsl_ppfe-eth-reorganize-pfe_netdev_ops.patch
deleted file mode 100644
index f17a53baaa..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0299-staging-fsl_ppfe-eth-reorganize-pfe_netdev_ops.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From c4e167b4cd8c5b74b04bf69ebf93796a7be3d83d Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Wed, 20 Jun 2018 10:22:32 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: reorganize pfe_netdev_ops
-
-Reorganize members of struct pfe_netdev_ops to match with the order
-of members in struct net_device_ops defined in include/linux/netdevice.h
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -2243,11 +2243,11 @@ static const struct net_device_ops pfe_n
- 	.ndo_stop = pfe_eth_close,
- 	.ndo_start_xmit = pfe_eth_send_packet,
- 	.ndo_select_queue = pfe_eth_select_queue,
--	.ndo_get_stats = pfe_eth_get_stats,
--	.ndo_set_mac_address = pfe_eth_set_mac_address,
- 	.ndo_set_rx_mode = pfe_eth_set_multi,
--	.ndo_set_features = pfe_eth_set_features,
-+	.ndo_set_mac_address = pfe_eth_set_mac_address,
- 	.ndo_validate_addr = eth_validate_addr,
-+	.ndo_get_stats = pfe_eth_get_stats,
-+	.ndo_set_features = pfe_eth_set_features,
- };
- 
- /* pfe_eth_init_one
diff --git a/target/linux/layerscape/patches-5.4/701-net-0300-staging-fsl_ppfe-eth-use-mask-for-rx-max-frame-len.patch b/target/linux/layerscape/patches-5.4/701-net-0300-staging-fsl_ppfe-eth-use-mask-for-rx-max-frame-len.patch
deleted file mode 100644
index 457bc6882a..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0300-staging-fsl_ppfe-eth-use-mask-for-rx-max-frame-len.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From f5be11cd83a6d6d4de7bd7cbeb641bb1032c4f84 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Wed, 20 Jun 2018 10:22:50 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: use mask for rx max frame len
-
-Define and use PFE_RCR_MAX_FL_MASK to properly set Rx max frame
-length of MAC Receive Control Register.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_hal.c | 10 ++++++----
- 1 file changed, 6 insertions(+), 4 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_hal.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hal.c
-@@ -19,6 +19,8 @@
- #include "pfe_mod.h"
- #include "pfe/pfe.h"
- 
-+#define PFE_RCR_MAX_FL_MASK	0xC000FFFF
-+
- void *cbus_base_addr;
- void *ddr_base_addr;
- unsigned long ddr_phys_base_addr;
-@@ -1011,8 +1013,8 @@ void gemac_no_broadcast(void *base)
- void gemac_enable_1536_rx(void *base)
- {
- 	/* Set 1536 as Maximum frame length */
--	writel(readl(base + EMAC_RCNTRL_REG) | (1536 << 16), base +
--		EMAC_RCNTRL_REG);
-+	writel((readl(base + EMAC_RCNTRL_REG) & PFE_RCR_MAX_FL_MASK)
-+		| (1536 << 16), base +	EMAC_RCNTRL_REG);
- }
- 
- /* GEMAC enable jumbo function.
-@@ -1020,8 +1022,8 @@ void gemac_enable_1536_rx(void *base)
-  */
- void gemac_enable_rx_jmb(void *base)
- {
--	writel(readl(base + EMAC_RCNTRL_REG) | (JUMBO_FRAME_SIZE << 16), base
--		+ EMAC_RCNTRL_REG);
-+	writel((readl(base + EMAC_RCNTRL_REG) & PFE_RCR_MAX_FL_MASK)
-+		| (JUMBO_FRAME_SIZE << 16), base + EMAC_RCNTRL_REG);
- }
- 
- /* GEMAC enable stacked vlan function.
diff --git a/target/linux/layerscape/patches-5.4/701-net-0301-staging-fsl_ppfe-eth-define-pfe-ndo_change_mtu-funct.patch b/target/linux/layerscape/patches-5.4/701-net-0301-staging-fsl_ppfe-eth-define-pfe-ndo_change_mtu-funct.patch
deleted file mode 100644
index f35ea677b6..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0301-staging-fsl_ppfe-eth-define-pfe-ndo_change_mtu-funct.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From d9c44cf1a757823fb069dea0c15a830513175bf3 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Wed, 20 Jun 2018 10:23:01 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: define pfe ndo_change_mtu function
-
-Define ndo_change_mtu function for pfe. This sets the max Rx frame
-length to the new mtu.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/include/pfe/pfe.h |  1 +
- drivers/staging/fsl_ppfe/pfe_eth.c         | 12 ++++++++++++
- drivers/staging/fsl_ppfe/pfe_hal.c         | 11 +++++++++++
- 3 files changed, 24 insertions(+)
-
---- a/drivers/staging/fsl_ppfe/include/pfe/pfe.h
-+++ b/drivers/staging/fsl_ppfe/include/pfe/pfe.h
-@@ -303,6 +303,7 @@ void gemac_allow_broadcast(void *base);
- void gemac_no_broadcast(void *base);
- void gemac_enable_1536_rx(void *base);
- void gemac_disable_1536_rx(void *base);
-+void gemac_set_rx_max_fl(void *base, int mtu);
- void gemac_enable_rx_jmb(void *base);
- void gemac_disable_rx_jmb(void *base);
- void gemac_enable_stacked_vlan(void *base);
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -1345,6 +1345,17 @@ static int pfe_eth_event_handler(void *d
- 	return 0;
- }
- 
-+static int pfe_eth_change_mtu(struct net_device *ndev, int new_mtu)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	ndev->mtu = new_mtu;
-+	new_mtu += ETH_HLEN + ETH_FCS_LEN;
-+	gemac_set_rx_max_fl(priv->EMAC_baseaddr, new_mtu);
-+
-+	return 0;
-+}
-+
- /* pfe_eth_open
-  */
- static int pfe_eth_open(struct net_device *ndev)
-@@ -2246,6 +2257,7 @@ static const struct net_device_ops pfe_n
- 	.ndo_set_rx_mode = pfe_eth_set_multi,
- 	.ndo_set_mac_address = pfe_eth_set_mac_address,
- 	.ndo_validate_addr = eth_validate_addr,
-+	.ndo_change_mtu = pfe_eth_change_mtu,
- 	.ndo_get_stats = pfe_eth_get_stats,
- 	.ndo_set_features = pfe_eth_set_features,
- };
---- a/drivers/staging/fsl_ppfe/pfe_hal.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hal.c
-@@ -1017,6 +1017,17 @@ void gemac_enable_1536_rx(void *base)
- 		| (1536 << 16), base +	EMAC_RCNTRL_REG);
- }
- 
-+/* GEMAC set rx Max frame length.
-+ * @param[in]	base	GEMAC base address
-+ * @param[in]	mtu	new mtu
-+ */
-+void gemac_set_rx_max_fl(void *base, int mtu)
-+{
-+	/* Set mtu as Maximum frame length */
-+	writel((readl(base + EMAC_RCNTRL_REG) & PFE_RCR_MAX_FL_MASK)
-+		| (mtu << 16), base + EMAC_RCNTRL_REG);
-+}
-+
- /* GEMAC enable jumbo function.
-  * @param[in]	base	GEMAC base address
-  */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0302-staging-fsl_ppfe-eth-remove-jumbo-frame-enable-from-.patch b/target/linux/layerscape/patches-5.4/701-net-0302-staging-fsl_ppfe-eth-remove-jumbo-frame-enable-from-.patch
deleted file mode 100644
index a98c55120c..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0302-staging-fsl_ppfe-eth-remove-jumbo-frame-enable-from-.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 162c09cee1b5b00e09fd99273fd2f8c460c0d989 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Wed, 20 Jun 2018 10:23:16 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: remove jumbo frame enable from gemac
- init
-
-MAC Receive Control Register was configured to allow jumbo frames.
-This is removed as jumbo frames can be supported anytime by changing
-mtu which will in turn modify MAX_FL field of MAC RCR.
-Jumbo frames caused pfe to hang on LS1012A rev 1.0 Silicon due to
-erratum A-010897.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c | 1 -
- drivers/staging/fsl_ppfe/pfe_hal.c | 9 ---------
- 2 files changed, 10 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -1272,7 +1272,6 @@ static int pfe_gemac_init(struct pfe_eth
- 	gemac_set_config(priv->EMAC_baseaddr, &cfg);
- 	gemac_allow_broadcast(priv->EMAC_baseaddr);
- 	gemac_enable_1536_rx(priv->EMAC_baseaddr);
--	gemac_enable_rx_jmb(priv->EMAC_baseaddr);
- 	gemac_enable_stacked_vlan(priv->EMAC_baseaddr);
- 	gemac_enable_pause_rx(priv->EMAC_baseaddr);
- 	gemac_set_bus_width(priv->EMAC_baseaddr, 64);
---- a/drivers/staging/fsl_ppfe/pfe_hal.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hal.c
-@@ -1028,15 +1028,6 @@ void gemac_set_rx_max_fl(void *base, int
- 		| (mtu << 16), base + EMAC_RCNTRL_REG);
- }
- 
--/* GEMAC enable jumbo function.
-- * @param[in]	base	GEMAC base address
-- */
--void gemac_enable_rx_jmb(void *base)
--{
--	writel((readl(base + EMAC_RCNTRL_REG) & PFE_RCR_MAX_FL_MASK)
--		| (JUMBO_FRAME_SIZE << 16), base + EMAC_RCNTRL_REG);
--}
--
- /* GEMAC enable stacked vlan function.
-  * @param[in]	base	GEMAC base address
-  */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0303-staging-fsl_ppfe-eth-disable-CRC-removal.patch b/target/linux/layerscape/patches-5.4/701-net-0303-staging-fsl_ppfe-eth-disable-CRC-removal.patch
deleted file mode 100644
index c17f8a83d7..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0303-staging-fsl_ppfe-eth-disable-CRC-removal.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 26ddfc3e40c52ca9cb78c6ae4b4608f94d2e8cb5 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Wed, 20 Jun 2018 10:23:32 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: disable CRC removal
-
-Disable CRC removal from the packet, so that packets are forwarded
-as is to Linux.
-CRC configuration in MAC will be reflected in the packet received
-to Linux.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_hal.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_hal.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hal.c
-@@ -869,8 +869,8 @@ void gemac_set_mode(void *base, int mode
- 	/*Remove loopbank*/
- 	val &= ~EMAC_RCNTRL_LOOP;
- 
--	/*Enable flow control and MII mode*/
--	val |= (EMAC_RCNTRL_FCE | EMAC_RCNTRL_MII_MODE);
-+	/* Enable flow control and MII mode and terminate received CRC */
-+	val |= (EMAC_RCNTRL_FCE | EMAC_RCNTRL_MII_MODE | EMAC_RCNTRL_CRC_FWD);
- 
- 	writel(val, base + EMAC_RCNTRL_REG);
- }
diff --git a/target/linux/layerscape/patches-5.4/701-net-0304-staging-fsl_ppfe-eth-handle-ls1012a-errata_a010897.patch b/target/linux/layerscape/patches-5.4/701-net-0304-staging-fsl_ppfe-eth-handle-ls1012a-errata_a010897.patch
deleted file mode 100644
index d7ee96a388..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0304-staging-fsl_ppfe-eth-handle-ls1012a-errata_a010897.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From a563dccef2871e37efcfcb2f3faee7c9f9381f6c Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Wed, 20 Jun 2018 10:23:41 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: handle ls1012a errata_a010897
-
-On LS1012A rev 1.0, Jumbo frames are not supported as it causes
-the PFE controller to hang. A reset of the entire chip is required
-to resume normal operation.
-
-To handle this errata, frames with length > 1900 are truncated for
-rev 1.0 of LS1012A.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c | 20 +++++++++++++++++++-
- drivers/staging/fsl_ppfe/pfe_eth.h |  3 ++-
- drivers/staging/fsl_ppfe/pfe_hal.c | 10 +++++++++-
- 3 files changed, 30 insertions(+), 3 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -44,6 +44,7 @@
- #include <linux/delay.h>
- #include <linux/regmap.h>
- #include <linux/i2c.h>
-+#include <linux/fsl/guts.h>
- 
- #if defined(CONFIG_NF_CONNTRACK_MARK)
- #include <net/netfilter/nf_conntrack.h>
-@@ -52,6 +53,10 @@
- #include "pfe_mod.h"
- #include "pfe_eth.h"
- 
-+#define LS1012A_REV_1_0		0x87040010
-+
-+bool pfe_errata_a010897;
-+
- static void *cbus_emac_base[3];
- static void *cbus_gpi_base[3];
- 
-@@ -2362,7 +2367,15 @@ static int pfe_eth_init_one(struct pfe *
- 
- 	/* Set MTU limits */
- 	ndev->min_mtu = ETH_MIN_MTU;
--	ndev->max_mtu = JUMBO_FRAME_SIZE;
-+
-+/*
-+ * Jumbo frames are not supported on LS1012A rev-1.0.
-+ * So max mtu should be restricted to supported frame length.
-+ */
-+	if (pfe_errata_a010897)
-+		ndev->max_mtu = JUMBO_FRAME_SIZE_V1 - ETH_HLEN - ETH_FCS_LEN;
-+	else
-+		ndev->max_mtu = JUMBO_FRAME_SIZE_V2 - ETH_HLEN - ETH_FCS_LEN;
- 
- 	/* supported features */
- 	ndev->hw_features = NETIF_F_SG;
-@@ -2453,6 +2466,11 @@ int pfe_eth_init(struct pfe *pfe)
- 	cbus_gpi_base[0] = EGPI1_BASE_ADDR;
- 	cbus_gpi_base[1] = EGPI2_BASE_ADDR;
- 
-+	if (fsl_guts_get_svr() == LS1012A_REV_1_0)
-+		pfe_errata_a010897 = true;
-+	else
-+		pfe_errata_a010897 = false;
-+
- 	for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) {
- 		err = pfe_eth_init_one(pfe, ii);
- 		if (err)
---- a/drivers/staging/fsl_ppfe/pfe_eth.h
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.h
-@@ -85,7 +85,8 @@ struct ls1012a_pfe_platform_data {
- #define EMAC_TXQ_CNT	16
- #define EMAC_TXQ_DEPTH	(HIF_TX_DESC_NT)
- 
--#define JUMBO_FRAME_SIZE	10258
-+#define JUMBO_FRAME_SIZE_V1	1900
-+#define JUMBO_FRAME_SIZE_V2	10258
- /*
-  * Client Tx queue threshold, for txQ flush condition.
-  * It must be smaller than the queue size (in case we ever change it in the
---- a/drivers/staging/fsl_ppfe/pfe_hal.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hal.c
-@@ -19,6 +19,9 @@
- #include "pfe_mod.h"
- #include "pfe/pfe.h"
- 
-+/* A-010897: Jumbo frame is not supported */
-+extern bool pfe_errata_a010897;
-+
- #define PFE_RCR_MAX_FL_MASK	0xC000FFFF
- 
- void *cbus_base_addr;
-@@ -1102,7 +1105,12 @@ void gemac_set_config(void *base, struct
- 	/*GEMAC config taken from VLSI */
- 	writel(0x00000004, base + EMAC_TFWR_STR_FWD);
- 	writel(0x00000005, base + EMAC_RX_SECTION_FULL);
--	writel(0x00003fff, base + EMAC_TRUNC_FL);
-+
-+	if (pfe_errata_a010897)
-+		writel(0x0000076c, base + EMAC_TRUNC_FL);
-+	else
-+		writel(0x00003fff, base + EMAC_TRUNC_FL);
-+
- 	writel(0x00000030, base + EMAC_TX_SECTION_EMPTY);
- 	writel(0x00000000, base + EMAC_MIB_CTRL_STS_REG);
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0305-staging-fsl_ppfe-eth-replace-magic-numbers.patch b/target/linux/layerscape/patches-5.4/701-net-0305-staging-fsl_ppfe-eth-replace-magic-numbers.patch
deleted file mode 100644
index 22d865cab4..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0305-staging-fsl_ppfe-eth-replace-magic-numbers.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From cdebdc900ae5cb29dc1cce1c26865001534ab77d Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Thu, 4 Oct 2018 09:38:34 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: replace magic numbers
-
-Replace magic numbers and some cosmetic changes.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c | 83 ++++++++++++++++++++++++++++----------
- 1 file changed, 61 insertions(+), 22 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -66,6 +66,36 @@ static void pfe_eth_flush_tx(struct pfe_
- static void pfe_eth_flush_txQ(struct pfe_eth_priv_s *priv, int tx_q_num, int
- 				from_tx, int n_desc);
- 
-+/* MDIO registers */
-+#define MDIO_SGMII_CR			0x00
-+#define MDIO_SGMII_SR			0x01
-+#define MDIO_SGMII_DEV_ABIL_SGMII	0x04
-+#define MDIO_SGMII_LINK_TMR_L		0x12
-+#define MDIO_SGMII_LINK_TMR_H		0x13
-+#define MDIO_SGMII_IF_MODE		0x14
-+
-+/* SGMII Control defines */
-+#define SGMII_CR_RST			0x8000
-+#define SGMII_CR_AN_EN			0x1000
-+#define SGMII_CR_RESTART_AN		0x0200
-+#define SGMII_CR_FD			0x0100
-+#define SGMII_CR_SPEED_SEL1_1G		0x0040
-+#define SGMII_CR_DEF_VAL		(SGMII_CR_AN_EN | SGMII_CR_FD | \
-+					 SGMII_CR_SPEED_SEL1_1G)
-+
-+/* SGMII IF Mode */
-+#define SGMII_DUPLEX_HALF		0x10
-+#define SGMII_SPEED_10MBPS		0x00
-+#define SGMII_SPEED_100MBPS		0x04
-+#define SGMII_SPEED_1GBPS		0x08
-+#define SGMII_USE_SGMII_AN		0x02
-+#define SGMII_EN			0x01
-+
-+/* SGMII Device Ability for SGMII */
-+#define SGMII_DEV_ABIL_ACK		0x4000
-+#define SGMII_DEV_ABIL_EEE_CLK_STP_EN	0x0100
-+#define SGMII_DEV_ABIL_SGMII		0x0001
-+
- unsigned int gemac_regs[] = {
- 	0x0004, /* Interrupt event */
- 	0x0008, /* Interrupt mask */
-@@ -1042,6 +1072,10 @@ static int pfe_get_phydev_speed(struct p
- #define SCFG_RGMIIPCR_SETSP_10M         (0x00000002)
- #define SCFG_RGMIIPCR_SETFD             (0x00000001)
- 
-+#define MDIOSELCR	0x484
-+#define MDIOSEL_SERDES	0x0
-+#define MDIOSEL_EXTPHY  0x80000000
-+
- static void pfe_set_rgmii_speed(struct phy_device *phydev)
- {
- 	u32 rgmii_pcr;
-@@ -1187,25 +1221,34 @@ static void ls1012a_configure_serdes(str
- 	netif_info(priv, drv, ndev, "%s\n", __func__);
- 	/* PCS configuration done with corresponding GEMAC */
- 
--	pfe_eth_mdio_read(bus, 0, 0);
--	pfe_eth_mdio_read(bus, 0, 1);
-+	pfe_eth_mdio_read(bus, 0, MDIO_SGMII_CR);
-+	pfe_eth_mdio_read(bus, 0, MDIO_SGMII_SR);
-+
-+	pfe_eth_mdio_write(bus, 0, MDIO_SGMII_CR, SGMII_CR_RST);
- 
--       /*These settings taken from validtion team */
--	pfe_eth_mdio_write(bus, 0, 0x0, 0x8000);
- 	if (sgmii_2500) {
--		pfe_eth_mdio_write(bus, 0, 0x14, 0x9);
--		pfe_eth_mdio_write(bus, 0, 0x4, 0x4001);
--		pfe_eth_mdio_write(bus, 0, 0x12, 0xa120);
--		pfe_eth_mdio_write(bus, 0, 0x13, 0x7);
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_IF_MODE, SGMII_SPEED_1GBPS
-+							       | SGMII_EN);
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_DEV_ABIL_SGMII,
-+				   SGMII_DEV_ABIL_ACK | SGMII_DEV_ABIL_SGMII);
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_L, 0xa120);
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_H, 0x7);
- 		/* Autonegotiation need to be disabled for 2.5G SGMII mode*/
--		value = 0x0140;
--		pfe_eth_mdio_write(bus, 0, 0x0, value);
-+		value = SGMII_CR_FD | SGMII_CR_SPEED_SEL1_1G;
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_CR, value);
- 	} else {
--		pfe_eth_mdio_write(bus, 0, 0x14, 0xb);
--		pfe_eth_mdio_write(bus, 0, 0x4, 0x1a1);
--		pfe_eth_mdio_write(bus, 0, 0x12, 0x400);
--		pfe_eth_mdio_write(bus, 0, 0x13, 0x0);
--		pfe_eth_mdio_write(bus, 0, 0x0, 0x1140);
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_IF_MODE,
-+				   SGMII_SPEED_1GBPS
-+				   | SGMII_USE_SGMII_AN
-+				   | SGMII_EN);
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_DEV_ABIL_SGMII,
-+				   SGMII_DEV_ABIL_EEE_CLK_STP_EN
-+				   | 0xa0
-+				   | SGMII_DEV_ABIL_SGMII);
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_L, 0x400);
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_H, 0x0);
-+		value = SGMII_CR_AN_EN | SGMII_CR_FD | SGMII_CR_SPEED_SEL1_1G;
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_CR, value);
- 	}
- }
- 
-@@ -1235,15 +1278,15 @@ static int pfe_phy_init(struct net_devic
- 	    (interface == PHY_INTERFACE_MODE_2500SGMII)) {
- 		/*Configure SGMII PCS */
- 		if (pfe->scfg) {
--			/*Config MDIO from serdes */
--			regmap_write(pfe->scfg, 0x484, 0x00000000);
-+			/* Config MDIO from serdes */
-+			regmap_write(pfe->scfg, MDIOSELCR, MDIOSEL_SERDES);
- 		}
- 		ls1012a_configure_serdes(ndev);
- 	}
- 
- 	if (pfe->scfg) {
- 		/*Config MDIO from PAD */
--		regmap_write(pfe->scfg, 0x484, 0x80000000);
-+		regmap_write(pfe->scfg, MDIOSELCR, MDIOSEL_EXTPHY);
- 	}
- 
- 	priv->oldlink = 0;
-@@ -2339,10 +2382,6 @@ static int pfe_eth_init_one(struct pfe *
- 	priv->PHY_baseaddr = cbus_emac_base[0];
- 	priv->GPI_baseaddr = cbus_gpi_base[id];
- 
--#define HIF_GEMAC_TMUQ_BASE	6
--	priv->low_tmu_q	=  HIF_GEMAC_TMUQ_BASE + (id * 2);
--	priv->high_tmu_q	=  priv->low_tmu_q + 1;
--
- 	spin_lock_init(&priv->lock);
- 
- 	pfe_eth_fast_tx_timeout_init(priv);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0306-staging-fsl_ppfe-eth-resolve-indentation-warning.patch b/target/linux/layerscape/patches-5.4/701-net-0306-staging-fsl_ppfe-eth-resolve-indentation-warning.patch
deleted file mode 100644
index d61a448b0b..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0306-staging-fsl_ppfe-eth-resolve-indentation-warning.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 1af2e375a76c55d227b7d1b1f1ba1c9cf850946a Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Thu, 4 Oct 2018 09:39:00 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: resolve indentation warning
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Resolve the following indentation warning:
-
-drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c:
-In function ‘pfe_get_gemac_if_proprties’:
-drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c:96:2:
-warning: this ‘else’ clause does not guard...
-[-Wmisleading-indentation]
-  else
-  ^~~~
-drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c:98:3:
-note: ...this statement, but the latter is misleadingly indented as
-if it were guarded by the ‘else’
-   pdata->ls1012a_eth_pdata[port].mdio_muxval = phy_id;
-   ^~~~~
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-+++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-@@ -83,11 +83,12 @@ static int pfe_get_gemac_if_proprties(st
- 	}
- 
- 	addr = of_get_property(gem, "fsl,mdio-mux-val", &size);
--	if (!addr)
-+	if (!addr) {
- 		pr_err("%s: Invalid mdio-mux-val....\n", __func__);
--	else
-+	} else {
- 		phy_id = be32_to_cpup(addr);
- 		pdata->ls1012a_eth_pdata[port].mdio_muxval = phy_id;
-+	}
- 
- 	if (pdata->ls1012a_eth_pdata[port].phy_id < 32)
- 		pfe->mdio_muxval[pdata->ls1012a_eth_pdata[port].phy_id] =
diff --git a/target/linux/layerscape/patches-5.4/701-net-0307-staging-fsl_ppfe-eth-add-fixed-link-support.patch b/target/linux/layerscape/patches-5.4/701-net-0307-staging-fsl_ppfe-eth-add-fixed-link-support.patch
deleted file mode 100644
index 900a4513fe..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0307-staging-fsl_ppfe-eth-add-fixed-link-support.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From 04373c37df836557ae7ebb769383baa1b57c5ffa Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Thu, 4 Oct 2018 09:38:17 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: add fixed-link support
-
-In cases where MAC is not connected to a normal MDIO-managed PHY
-device, and instead to a switch, it is configured as a "fixed-link".
-Code to handle this scenario is added here.
-
-phy_node in the dtb is checked to identify a fixed-link.
-On identification of a fixed-link, it is registered and connected.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c              | 21 ++++++++++++++++++++-
- drivers/staging/fsl_ppfe/pfe_eth.h              |  2 ++
- drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c |  4 ++++
- 3 files changed, 26 insertions(+), 1 deletion(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -39,6 +39,9 @@
- #include <net/ip.h>
- #include <net/sock.h>
- 
-+#include <linux/of.h>
-+#include <linux/of_mdio.h>
-+
- #include <linux/io.h>
- #include <asm/irq.h>
- #include <linux/delay.h>
-@@ -1263,6 +1266,8 @@ static int pfe_phy_init(struct net_devic
- 	char phy_id[MII_BUS_ID_SIZE + 3];
- 	char bus_id[MII_BUS_ID_SIZE];
- 	phy_interface_t interface;
-+	struct device_node *phy_node;
-+	int rc;
- 
- 	priv->oldlink = 0;
- 	priv->oldspeed = 0;
-@@ -1293,7 +1298,20 @@ static int pfe_phy_init(struct net_devic
- 	priv->oldspeed = 0;
- 	priv->oldduplex = -1;
- 	pr_info("%s interface %x\n", __func__, interface);
--	phydev = phy_connect(ndev, phy_id, &pfe_eth_adjust_link, interface);
-+
-+	if (of_phy_is_fixed_link(priv->phy_node)) {
-+		rc = of_phy_register_fixed_link(priv->phy_node);
-+		if (rc)
-+			return rc;
-+		phy_node = of_node_get(priv->phy_node);
-+		phydev = of_phy_connect(ndev, phy_node, pfe_eth_adjust_link, 0,
-+					priv->einfo->mii_config);
-+		of_node_put(phy_node);
-+
-+	} else {
-+		phydev = phy_connect(ndev, phy_id,
-+				     &pfe_eth_adjust_link, interface);
-+	}
- 
- 	if (IS_ERR(phydev)) {
- 		netdev_err(ndev, "phy_connect() failed\n");
-@@ -2371,6 +2389,7 @@ static int pfe_eth_init_one(struct pfe *
- 	priv->ndev = ndev;
- 	priv->id = einfo[id].gem_id;
- 	priv->pfe = pfe;
-+	priv->phy_node = einfo[id].phy_node;
- 
- 	SET_NETDEV_DEV(priv->ndev, priv->pfe->dev);
- 
---- a/drivers/staging/fsl_ppfe/pfe_eth.h
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.h
-@@ -61,6 +61,7 @@ struct ls1012a_eth_platform_data {
- 	u32 phy_id;
- 	u32 mdio_muxval;
- 	u8 mac_addr[ETH_ALEN];
-+	struct device_node	*phy_node;
- };
- 
- struct ls1012a_mdio_platform_data {
-@@ -144,6 +145,7 @@ struct  pfe_eth_priv_s {
- 	int			oldspeed;
- 	int			oldduplex;
- 	int			oldlink;
-+	struct device_node	*phy_node;
- 	/* mdio info */
- 	int			mdc_div;
- 	struct mii_bus		*mii_bus;
---- a/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-+++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-@@ -18,8 +18,10 @@
- 
- #include <linux/module.h>
- #include <linux/device.h>
-+#include <linux/of.h>
- #include <linux/of_net.h>
- #include <linux/of_address.h>
-+#include <linux/of_mdio.h>
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- #include <linux/clk.h>
-@@ -118,6 +120,8 @@ static int pfe_get_gemac_if_proprties(st
- 	pdata->ls1012a_mdio_pdata[port].irq[0] = PHY_POLL;
- 
- done:
-+	if (of_phy_is_fixed_link(gem))
-+		pdata->ls1012a_eth_pdata[port].phy_node = of_node_get(gem);
- 
- 	return 0;
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0308-staging-fsl_ppfe-add-support-for-a-char-dev-for-link.patch b/target/linux/layerscape/patches-5.4/701-net-0308-staging-fsl_ppfe-add-support-for-a-char-dev-for-link.patch
deleted file mode 100644
index c445952222..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0308-staging-fsl_ppfe-add-support-for-a-char-dev-for-link.patch
+++ /dev/null
@@ -1,364 +0,0 @@
-From a41d4af2ed4b02edca9d7f69955893d407274dc2 Mon Sep 17 00:00:00 2001
-From: Shreyansh Jain <shreyansh.jain@nxp.com>
-Date: Wed, 6 Jun 2018 14:19:34 +0530
-Subject: [PATCH] staging: fsl_ppfe: add support for a char dev for link status
-
-Read and IOCTL support is added. Application would need to open,
-read/ioctl the /dev/pfe_us_cdev device.
-select is pending as it requires a wait_queue.
-
-Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/Makefile   |   3 +-
- drivers/staging/fsl_ppfe/pfe_cdev.c | 207 ++++++++++++++++++++++++++++++++++++
- drivers/staging/fsl_ppfe/pfe_cdev.h |  52 +++++++++
- drivers/staging/fsl_ppfe/pfe_eth.c  |  14 +++
- drivers/staging/fsl_ppfe/pfe_mod.c  |  14 +++
- 5 files changed, 289 insertions(+), 1 deletion(-)
- create mode 100644 drivers/staging/fsl_ppfe/pfe_cdev.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_cdev.h
-
---- a/drivers/staging/fsl_ppfe/Makefile
-+++ b/drivers/staging/fsl_ppfe/Makefile
-@@ -16,4 +16,5 @@ pfe-y += pfe_mod.o \
- 	pfe_sysfs.o \
- 	pfe_debugfs.o \
- 	pfe_ls1012a_platform.o \
--	pfe_hal.o
-+	pfe_hal.o \
-+	pfe_cdev.o
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_cdev.c
-@@ -0,0 +1,207 @@
-+/*
-+ * Copyright 2018 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+/* @pfe_cdev.c.
-+ *  Dummy device representing the PFE US in userspace.
-+ *  - used for interacting with the kernel layer for link status
-+ */
-+
-+#include "pfe_cdev.h"
-+
-+static int pfe_majno;
-+static struct class *pfe_char_class;
-+static struct device *pfe_char_dev;
-+
-+struct pfe_shared_info link_states[PFE_CDEV_ETH_COUNT];
-+
-+static int pfe_cdev_open(struct inode *inp, struct file *fp)
-+{
-+	pr_debug("PFE CDEV device opened.\n");
-+	return 0;
-+}
-+
-+static ssize_t pfe_cdev_read(struct file *fp, char *buf,
-+			     size_t len, loff_t *off)
-+{
-+	int ret = 0;
-+
-+	pr_info("PFE CDEV attempt copying (%lu) size of user.\n",
-+		sizeof(link_states));
-+
-+	pr_debug("Dump link_state on screen before copy_to_user\n");
-+	for (; ret < PFE_CDEV_ETH_COUNT; ret++) {
-+		pr_debug("%u  %u", link_states[ret].phy_id,
-+			 link_states[ret].state);
-+		pr_debug("\n");
-+	}
-+
-+	/* Copy to user the value in buffer sized len */
-+	ret = copy_to_user(buf, &link_states, sizeof(link_states));
-+	if (ret != 0) {
-+		pr_err("Failed to send (%d)bytes of (%lu) requested.\n",
-+		       ret, len);
-+		return -EFAULT;
-+	}
-+
-+	/* offset set back to 0 as there is contextual reading offset */
-+	*off = 0;
-+	pr_debug("Read of (%lu) bytes performed.\n", sizeof(link_states));
-+
-+	return sizeof(link_states);
-+}
-+
-+/**
-+ * This function is for getting some commands from user through non-IOCTL
-+ * channel. It can used to configure the device.
-+ * TODO: To be filled in future, if require duplex communication with user
-+ * space.
-+ */
-+static ssize_t pfe_cdev_write(struct file *fp, const char *buf,
-+			      size_t len, loff_t *off)
-+{
-+	pr_info("PFE CDEV Write operation not supported!\n");
-+
-+	return -EFAULT;
-+}
-+
-+static int pfe_cdev_release(struct inode *inp, struct file *fp)
-+{
-+	pr_info("PFE_CDEV: Device successfully closed\n");
-+	return 0;
-+}
-+
-+static long pfe_cdev_ioctl(struct file *fp, unsigned int cmd,
-+			   unsigned long arg)
-+{
-+	int ret = -EFAULT;
-+	int __user *argp = (int __user *)arg;
-+
-+	pr_debug("PFE CDEV IOCTL Called with cmd=(%u)\n", cmd);
-+
-+	switch (cmd) {
-+	case PFE_CDEV_ETH0_STATE_GET:
-+		/* Return an unsigned int (link state) for ETH0 */
-+		*argp = link_states[0].state;
-+		pr_debug("Returning state=%d for ETH0\n", *argp);
-+		ret = 0;
-+		break;
-+	case PFE_CDEV_ETH1_STATE_GET:
-+		/* Return an unsigned int (link state) for ETH0 */
-+		*argp = link_states[1].state;
-+		pr_debug("Returning state=%d for ETH1\n", *argp);
-+		ret = 0;
-+		break;
-+	default:
-+		pr_info("Unsupport cmd (%d) for PFE CDEV.\n", cmd);
-+		break;
-+	};
-+
-+	return ret;
-+}
-+
-+static unsigned int pfe_cdev_poll(struct file *fp,
-+				  struct poll_table_struct *wait)
-+{
-+	pr_info("PFE CDEV poll method not supported\n");
-+	return 0;
-+}
-+
-+static const struct file_operations pfe_cdev_fops = {
-+	.open = pfe_cdev_open,
-+	.read = pfe_cdev_read,
-+	.write = pfe_cdev_write,
-+	.release = pfe_cdev_release,
-+	.unlocked_ioctl = pfe_cdev_ioctl,
-+	.poll = pfe_cdev_poll,
-+};
-+
-+int pfe_cdev_init(void)
-+{
-+	int ret;
-+
-+	pr_debug("PFE CDEV initialization begin\n");
-+
-+	/* Register the major number for the device */
-+	pfe_majno = register_chrdev(0, PFE_CDEV_NAME, &pfe_cdev_fops);
-+	if (pfe_majno < 0) {
-+		pr_err("Unable to register PFE CDEV. PFE CDEV not available\n");
-+		ret = pfe_majno;
-+		goto cleanup;
-+	}
-+
-+	pr_debug("PFE CDEV assigned major number: %d\n", pfe_majno);
-+
-+	/* Register the class for the device */
-+	pfe_char_class = class_create(THIS_MODULE, PFE_CLASS_NAME);
-+	if (IS_ERR(pfe_char_class)) {
-+		pr_err(
-+		"Failed to init class for PFE CDEV. PFE CDEV not available.\n");
-+		goto cleanup;
-+	}
-+
-+	pr_debug("PFE CDEV Class created successfully.\n");
-+
-+	/* Create the device without any parent and without any callback data */
-+	    pfe_char_dev = device_create(pfe_char_class, NULL,
-+					 MKDEV(pfe_majno, 0), NULL,
-+					 PFE_CDEV_NAME);
-+	if (IS_ERR(pfe_char_dev)) {
-+		pr_err("Unable to PFE CDEV device. PFE CDEV not available.\n");
-+		ret = PTR_ERR(pfe_char_dev);
-+		goto cleanup;
-+	}
-+
-+	/* Information structure being shared with the userspace */
-+	memset(link_states, 0, sizeof(struct pfe_shared_info) *
-+			PFE_CDEV_ETH_COUNT);
-+
-+	pr_info("PFE CDEV created: %s\n", PFE_CDEV_NAME);
-+
-+	ret = 0;
-+	return ret;
-+
-+cleanup:
-+	if (!IS_ERR(pfe_char_class))
-+		class_destroy(pfe_char_class);
-+
-+	if (pfe_majno > 0)
-+		unregister_chrdev(pfe_majno, PFE_CDEV_NAME);
-+
-+	ret = -EFAULT;
-+	return ret;
-+}
-+
-+void pfe_cdev_exit(void)
-+{
-+	if (!IS_ERR(pfe_char_dev))
-+		device_destroy(pfe_char_class, MKDEV(pfe_majno, 0));
-+
-+	if (!IS_ERR(pfe_char_class)) {
-+		class_unregister(pfe_char_class);
-+		class_destroy(pfe_char_class);
-+	}
-+
-+	if (pfe_majno > 0)
-+		unregister_chrdev(pfe_majno, PFE_CDEV_NAME);
-+
-+	/* reset the variables */
-+	pfe_majno = 0;
-+	pfe_char_class = NULL;
-+	pfe_char_dev = NULL;
-+
-+	pr_info("PFE CDEV Removed.\n");
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_cdev.h
-@@ -0,0 +1,52 @@
-+/*
-+ * Copyright 2018 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _PFE_CDEV_H_
-+#define _PFE_CDEV_H_
-+
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/err.h>
-+#include <linux/kernel.h>
-+#include <linux/fs.h>
-+#include <linux/uaccess.h>
-+#include <linux/poll.h>
-+
-+#define  PFE_CDEV_NAME "pfe_us_cdev"
-+#define  PFE_CLASS_NAME  "ppfe_us"
-+
-+/* Extracted from ls1012a_pfe_platform_data, there are 3 interfaces which are
-+ * supported by PFE driver. Should be updated if number of eth devices are
-+ * changed.
-+ */
-+#define PFE_CDEV_ETH_COUNT 3
-+
-+struct pfe_shared_info {
-+	uint32_t phy_id; /* Link phy ID */
-+	uint8_t state;  /* Has either 0 or 1 */
-+};
-+
-+extern struct pfe_shared_info link_states[PFE_CDEV_ETH_COUNT];
-+
-+/* IOCTL Commands */
-+#define PFE_CDEV_ETH0_STATE_GET	0
-+#define PFE_CDEV_ETH1_STATE_GET	1
-+
-+int pfe_cdev_init(void);
-+void pfe_cdev_exit(void);
-+
-+#endif /* _PFE_CDEV_H_ */
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -55,6 +55,7 @@
- 
- #include "pfe_mod.h"
- #include "pfe_eth.h"
-+#include "pfe_cdev.h"
- 
- #define LS1012A_REV_1_0		0x87040010
- 
-@@ -1160,6 +1161,19 @@ static void pfe_eth_adjust_link(struct n
- 		phy_print_status(phydev);
- 
- 	spin_unlock_irqrestore(&priv->lock, flags);
-+
-+	/* Now, dump the details to the cdev.
-+	 * XXX: Locking would be required? (uniprocess arch)
-+	 *      Or, maybe move it in spinlock above
-+	 */
-+	if (us && priv->einfo->gem_id < PFE_CDEV_ETH_COUNT) {
-+		pr_debug("Changing link state from (%u) to (%u) for ID=(%u)\n",
-+			 link_states[priv->einfo->gem_id].state,
-+			 phydev->link,
-+			 priv->einfo->gem_id);
-+		link_states[priv->einfo->gem_id].phy_id = priv->einfo->gem_id;
-+		link_states[priv->einfo->gem_id].state = phydev->link;
-+	}
- }
- 
- /* pfe_phy_exit
---- a/drivers/staging/fsl_ppfe/pfe_mod.c
-+++ b/drivers/staging/fsl_ppfe/pfe_mod.c
-@@ -18,6 +18,7 @@
- 
- #include <linux/dma-mapping.h>
- #include "pfe_mod.h"
-+#include "pfe_cdev.h"
- 
- unsigned int us;
- module_param(us, uint, 0444);
-@@ -92,8 +93,18 @@ firmware_init:
- 	if (rc < 0)
- 		goto err_debugfs;
- 
-+	if (us) {
-+		/* Creating a character device */
-+		rc = pfe_cdev_init();
-+		if (rc < 0)
-+			goto err_cdev;
-+	}
-+
- 	return 0;
- 
-+err_cdev:
-+	pfe_debugfs_exit(pfe);
-+
- err_debugfs:
- 	pfe_sysfs_exit(pfe);
- 
-@@ -129,6 +140,9 @@ int pfe_remove(struct pfe *pfe)
- {
- 	pr_info("%s\n", __func__);
- 
-+	if (us)
-+		pfe_cdev_exit();
-+
- 	pfe_debugfs_exit(pfe);
- 
- 	pfe_sysfs_exit(pfe);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0309-staging-fsl_ppfe-enable-hif-event-from-userspace.patch b/target/linux/layerscape/patches-5.4/701-net-0309-staging-fsl_ppfe-enable-hif-event-from-userspace.patch
deleted file mode 100644
index 785f316028..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0309-staging-fsl_ppfe-enable-hif-event-from-userspace.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From 0c072b46ecc8689be160bfdc750e95ad9879d706 Mon Sep 17 00:00:00 2001
-From: Akhil Goyal <akhil.goyal@nxp.com>
-Date: Thu, 5 Jul 2018 20:14:21 +0530
-Subject: [PATCH] staging: fsl_ppfe: enable hif event from userspace
-
-HIF interrupts are enabled using ioctl from user space,
-and epoll wait from user space wakes up when there is an HIF
-interrupt.
-
-Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_cdev.c | 57 +++++++++++++++++++++++++++++++++++++
- drivers/staging/fsl_ppfe/pfe_cdev.h |  5 ++--
- 2 files changed, 60 insertions(+), 2 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_cdev.c
-+++ b/drivers/staging/fsl_ppfe/pfe_cdev.c
-@@ -20,11 +20,18 @@
-  *  - used for interacting with the kernel layer for link status
-  */
- 
-+#include <linux/eventfd.h>
-+#include <linux/irqreturn.h>
-+#include <linux/io.h>
-+#include <asm/irq.h>
-+
- #include "pfe_cdev.h"
-+#include "pfe_mod.h"
- 
- static int pfe_majno;
- static struct class *pfe_char_class;
- static struct device *pfe_char_dev;
-+struct eventfd_ctx *g_trigger;
- 
- struct pfe_shared_info link_states[PFE_CDEV_ETH_COUNT];
- 
-@@ -80,10 +87,44 @@ static ssize_t pfe_cdev_write(struct fil
- 
- static int pfe_cdev_release(struct inode *inp, struct file *fp)
- {
-+	if (g_trigger) {
-+		free_irq(pfe->hif_irq, g_trigger);
-+		eventfd_ctx_put(g_trigger);
-+		g_trigger = NULL;
-+	}
-+
- 	pr_info("PFE_CDEV: Device successfully closed\n");
- 	return 0;
- }
- 
-+/*
-+ * hif_us_isr-
-+ * This ISR routine processes Rx/Tx done interrupts from the HIF hardware block
-+ */
-+static irqreturn_t hif_us_isr(int irq, void *arg)
-+{
-+	struct eventfd_ctx *trigger = (struct eventfd_ctx *)arg;
-+	int int_status;
-+	int int_enable_mask;
-+
-+	/*Read hif interrupt source register */
-+	int_status = readl_relaxed(HIF_INT_SRC);
-+	int_enable_mask = readl_relaxed(HIF_INT_ENABLE);
-+
-+	if ((int_status & HIF_INT) == 0)
-+		return IRQ_NONE;
-+
-+	if (int_status & HIF_RXPKT_INT) {
-+		int_enable_mask &= ~(HIF_RXPKT_INT);
-+		eventfd_signal(trigger, 1);
-+	}
-+
-+	/*Disable interrupts, they will be enabled after they are serviced */
-+	writel_relaxed(int_enable_mask, HIF_INT_ENABLE);
-+
-+	return IRQ_HANDLED;
-+}
-+
- static long pfe_cdev_ioctl(struct file *fp, unsigned int cmd,
- 			   unsigned long arg)
- {
-@@ -105,6 +146,22 @@ static long pfe_cdev_ioctl(struct file *
- 		pr_debug("Returning state=%d for ETH1\n", *argp);
- 		ret = 0;
- 		break;
-+	case PFE_CDEV_HIF_INTR_EN:
-+		/* Return success/failure */
-+		g_trigger = eventfd_ctx_fdget(*argp);
-+		if (IS_ERR(g_trigger))
-+			return PTR_ERR(g_trigger);
-+		ret = request_irq(pfe->hif_irq, hif_us_isr, 0, "pfe_hif",
-+				  g_trigger);
-+		if (ret) {
-+			pr_err("%s: failed to get the hif IRQ = %d\n",
-+			       __func__, pfe->hif_irq);
-+			eventfd_ctx_put(g_trigger);
-+			g_trigger = NULL;
-+		}
-+		pr_debug("request_irq for hif interrupt: %d\n", pfe->hif_irq);
-+		ret = 0;
-+		break;
- 	default:
- 		pr_info("Unsupport cmd (%d) for PFE CDEV.\n", cmd);
- 		break;
---- a/drivers/staging/fsl_ppfe/pfe_cdev.h
-+++ b/drivers/staging/fsl_ppfe/pfe_cdev.h
-@@ -43,8 +43,9 @@ struct pfe_shared_info {
- extern struct pfe_shared_info link_states[PFE_CDEV_ETH_COUNT];
- 
- /* IOCTL Commands */
--#define PFE_CDEV_ETH0_STATE_GET	0
--#define PFE_CDEV_ETH1_STATE_GET	1
-+#define PFE_CDEV_ETH0_STATE_GET		_IOR('R', 0, int)
-+#define PFE_CDEV_ETH1_STATE_GET		_IOR('R', 1, int)
-+#define PFE_CDEV_HIF_INTR_EN		_IOWR('R', 2, int)
- 
- int pfe_cdev_init(void);
- void pfe_cdev_exit(void);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0310-staging-fsl_ppfe-performance-tuning-for-user-space.patch b/target/linux/layerscape/patches-5.4/701-net-0310-staging-fsl_ppfe-performance-tuning-for-user-space.patch
deleted file mode 100644
index 8eac290b3a..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0310-staging-fsl_ppfe-performance-tuning-for-user-space.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 31fa4aeafa41a38c76085af4de7192c572e85119 Mon Sep 17 00:00:00 2001
-From: Akhil Goyal <akhil.goyal@nxp.com>
-Date: Fri, 20 Jul 2018 16:43:25 +0530
-Subject: [PATCH] staging: fsl_ppfe: performance tuning for user space
-
-interrupt coalescing of 100 usec is added.
-
-Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
-Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_cdev.c | 12 +++++++++---
- 1 file changed, 9 insertions(+), 3 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_cdev.c
-+++ b/drivers/staging/fsl_ppfe/pfe_cdev.c
-@@ -116,15 +116,18 @@ static irqreturn_t hif_us_isr(int irq, v
- 
- 	if (int_status & HIF_RXPKT_INT) {
- 		int_enable_mask &= ~(HIF_RXPKT_INT);
-+		/* Disable interrupts, they will be enabled after
-+		 * they are serviced
-+		 */
-+		writel_relaxed(int_enable_mask, HIF_INT_ENABLE);
-+
- 		eventfd_signal(trigger, 1);
- 	}
- 
--	/*Disable interrupts, they will be enabled after they are serviced */
--	writel_relaxed(int_enable_mask, HIF_INT_ENABLE);
--
- 	return IRQ_HANDLED;
- }
- 
-+#define PFE_INTR_COAL_USECS	100
- static long pfe_cdev_ioctl(struct file *fp, unsigned int cmd,
- 			   unsigned long arg)
- {
-@@ -159,6 +162,9 @@ static long pfe_cdev_ioctl(struct file *
- 			eventfd_ctx_put(g_trigger);
- 			g_trigger = NULL;
- 		}
-+		writel((PFE_INTR_COAL_USECS * (pfe->ctrl.sys_clk / 1000)) |
-+			HIF_INT_COAL_ENABLE, HIF_INT_COAL);
-+
- 		pr_debug("request_irq for hif interrupt: %d\n", pfe->hif_irq);
- 		ret = 0;
- 		break;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0311-staging-fsl_ppfe-eth-Update-to-use-SPDX-identifiers.patch b/target/linux/layerscape/patches-5.4/701-net-0311-staging-fsl_ppfe-eth-Update-to-use-SPDX-identifiers.patch
deleted file mode 100644
index 139682d4ae..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0311-staging-fsl_ppfe-eth-Update-to-use-SPDX-identifiers.patch
+++ /dev/null
@@ -1,563 +0,0 @@
-From 9690960751950583eb80ad9d623c45e974359829 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Tue, 20 Nov 2018 21:50:23 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: Update to use SPDX identifiers
-
-Replace license text with corresponding SPDX identifiers and update the
-format of existing SPDX identifiers to follow the new guideline
-Documentation/process/license-rules.rst.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_cdev.c             | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_cdev.h             | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_ctrl.c             | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_ctrl.h             | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_debugfs.c          | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_debugfs.h          | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_eth.c              | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_eth.h              | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_firmware.c         | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_firmware.h         | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_hal.c              | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_hif.c              | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_hif.h              | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_hif_lib.c          | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_hif_lib.h          | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_hw.c               | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_hw.h               | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_mod.c              | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_mod.h              | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_perfmon.h          | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_sysfs.c            | 14 +-------------
- drivers/staging/fsl_ppfe/pfe_sysfs.h            | 14 +-------------
- 23 files changed, 23 insertions(+), 299 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_cdev.c
-+++ b/drivers/staging/fsl_ppfe/pfe_cdev.c
-@@ -1,18 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0+
- /*
-  * Copyright 2018 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- /* @pfe_cdev.c.
---- a/drivers/staging/fsl_ppfe/pfe_cdev.h
-+++ b/drivers/staging/fsl_ppfe/pfe_cdev.h
-@@ -1,18 +1,6 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
- /*
-  * Copyright 2018 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #ifndef _PFE_CDEV_H_
---- a/drivers/staging/fsl_ppfe/pfe_ctrl.c
-+++ b/drivers/staging/fsl_ppfe/pfe_ctrl.c
-@@ -1,19 +1,7 @@
-+// SPDX-License-Identifier: GPL-2.0+
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #include <linux/kernel.h>
---- a/drivers/staging/fsl_ppfe/pfe_ctrl.h
-+++ b/drivers/staging/fsl_ppfe/pfe_ctrl.h
-@@ -1,19 +1,7 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #ifndef _PFE_CTRL_H_
---- a/drivers/staging/fsl_ppfe/pfe_debugfs.c
-+++ b/drivers/staging/fsl_ppfe/pfe_debugfs.c
-@@ -1,19 +1,7 @@
-+// SPDX-License-Identifier: GPL-2.0+
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #include <linux/module.h>
---- a/drivers/staging/fsl_ppfe/pfe_debugfs.h
-+++ b/drivers/staging/fsl_ppfe/pfe_debugfs.h
-@@ -1,19 +1,7 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #ifndef _PFE_DEBUGFS_H_
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -1,19 +1,7 @@
-+// SPDX-License-Identifier: GPL-2.0+
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- /* @pfe_eth.c.
---- a/drivers/staging/fsl_ppfe/pfe_eth.h
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.h
-@@ -1,19 +1,7 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #ifndef _PFE_ETH_H_
---- a/drivers/staging/fsl_ppfe/pfe_firmware.c
-+++ b/drivers/staging/fsl_ppfe/pfe_firmware.c
-@@ -1,19 +1,7 @@
-+// SPDX-License-Identifier: GPL-2.0+
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- /*
---- a/drivers/staging/fsl_ppfe/pfe_firmware.h
-+++ b/drivers/staging/fsl_ppfe/pfe_firmware.h
-@@ -1,19 +1,7 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #ifndef _PFE_FIRMWARE_H_
---- a/drivers/staging/fsl_ppfe/pfe_hal.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hal.c
-@@ -1,19 +1,7 @@
-+// SPDX-License-Identifier: GPL-2.0+
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #include "pfe_mod.h"
---- a/drivers/staging/fsl_ppfe/pfe_hif.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hif.c
-@@ -1,19 +1,7 @@
-+// SPDX-License-Identifier: GPL-2.0+
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #include <linux/kernel.h>
---- a/drivers/staging/fsl_ppfe/pfe_hif.h
-+++ b/drivers/staging/fsl_ppfe/pfe_hif.h
-@@ -1,19 +1,7 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #ifndef _PFE_HIF_H_
---- a/drivers/staging/fsl_ppfe/pfe_hif_lib.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.c
-@@ -1,19 +1,7 @@
-+// SPDX-License-Identifier: GPL-2.0+
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #include <linux/version.h>
---- a/drivers/staging/fsl_ppfe/pfe_hif_lib.h
-+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.h
-@@ -1,19 +1,7 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #ifndef _PFE_HIF_LIB_H_
---- a/drivers/staging/fsl_ppfe/pfe_hw.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hw.c
-@@ -1,19 +1,7 @@
-+// SPDX-License-Identifier: GPL-2.0+
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #include "pfe_mod.h"
---- a/drivers/staging/fsl_ppfe/pfe_hw.h
-+++ b/drivers/staging/fsl_ppfe/pfe_hw.h
-@@ -1,19 +1,7 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #ifndef _PFE_HW_H_
---- a/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-+++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-@@ -1,19 +1,7 @@
-+// SPDX-License-Identifier: GPL-2.0+
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #include <linux/module.h>
---- a/drivers/staging/fsl_ppfe/pfe_mod.c
-+++ b/drivers/staging/fsl_ppfe/pfe_mod.c
-@@ -1,19 +1,7 @@
-+// SPDX-License-Identifier: GPL-2.0+
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #include <linux/dma-mapping.h>
---- a/drivers/staging/fsl_ppfe/pfe_mod.h
-+++ b/drivers/staging/fsl_ppfe/pfe_mod.h
-@@ -1,19 +1,7 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #ifndef _PFE_MOD_H_
---- a/drivers/staging/fsl_ppfe/pfe_perfmon.h
-+++ b/drivers/staging/fsl_ppfe/pfe_perfmon.h
-@@ -1,19 +1,7 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #ifndef _PFE_PERFMON_H_
---- a/drivers/staging/fsl_ppfe/pfe_sysfs.c
-+++ b/drivers/staging/fsl_ppfe/pfe_sysfs.c
-@@ -1,19 +1,7 @@
-+// SPDX-License-Identifier: GPL-2.0+
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #include <linux/module.h>
---- a/drivers/staging/fsl_ppfe/pfe_sysfs.h
-+++ b/drivers/staging/fsl_ppfe/pfe_sysfs.h
-@@ -1,19 +1,7 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
- /*
-  * Copyright 2015-2016 Freescale Semiconductor, Inc.
-  * Copyright 2017 NXP
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  */
- 
- #ifndef _PFE_SYSFS_H_
diff --git a/target/linux/layerscape/patches-5.4/701-net-0312-staging-fsl_ppfe-eth-misc-clean-up.patch b/target/linux/layerscape/patches-5.4/701-net-0312-staging-fsl_ppfe-eth-misc-clean-up.patch
deleted file mode 100644
index 6f1f7c5d84..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0312-staging-fsl_ppfe-eth-misc-clean-up.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 508121cfde12d0e35716bb7e524dc1f80c82262c Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Tue, 20 Nov 2018 21:50:40 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: misc clean up
-
-- remove redundant hwfeature init
-- remove unused vars from ls1012a_eth_platform_data
-- To handle ls1012a errata_a010897, PPFE driver requires GUTS driver
-to be compiled in. Select FSL_GUTS when PPFE driver is compiled.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/Kconfig   | 1 +
- drivers/staging/fsl_ppfe/pfe_eth.c | 3 ---
- drivers/staging/fsl_ppfe/pfe_eth.h | 4 ----
- 3 files changed, 1 insertion(+), 7 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/Kconfig
-+++ b/drivers/staging/fsl_ppfe/Kconfig
-@@ -3,6 +3,7 @@
- #
- config FSL_PPFE
- 	bool "Freescale PPFE Driver"
-+	select FSL_GUTS
- 	default n
- 	---help---
- 	Freescale LS1012A SoC has a Programmable Packet Forwarding Engine.
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -2437,9 +2437,6 @@ static int pfe_eth_init_one(struct pfe *
- 	else
- 		ndev->max_mtu = JUMBO_FRAME_SIZE_V2 - ETH_HLEN - ETH_FCS_LEN;
- 
--	/* supported features */
--	ndev->hw_features = NETIF_F_SG;
--
- 	/*Enable after checksum offload is validated */
- 	ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM |
- 		NETIF_F_IPV6_CSUM | NETIF_F_SG;
---- a/drivers/staging/fsl_ppfe/pfe_eth.h
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.h
-@@ -37,10 +37,6 @@
- #define GEMAC_NO_PHY            BIT(0)
- 
- struct ls1012a_eth_platform_data {
--	/* device specific information */
--	u32 device_flags;
--	char name[16];
--
- 	/* board specific information */
- 	u32 mii_config;
- 	u32 phy_flags;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0313-staging-fsl_ppfe-eth-reorganize-platform-phy-paramet.patch b/target/linux/layerscape/patches-5.4/701-net-0313-staging-fsl_ppfe-eth-reorganize-platform-phy-paramet.patch
deleted file mode 100644
index 8a16edf285..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0313-staging-fsl_ppfe-eth-reorganize-platform-phy-paramet.patch
+++ /dev/null
@@ -1,156 +0,0 @@
-From bb13c3cfaaac3bb50a7f59d0cfa54ff463c2ca86 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Tue, 20 Nov 2018 21:50:51 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: reorganize platform phy parameters
-
-- Use "phy-handle" and of_* functions to get phy node and fixed-link
-parameters
-
-- Reorganize phy parameters and initialize them only if phy-handle
-or fixed-link is defined in the dtb.
-
-- correct typo pfe_get_gemac_if_proprties to pfe_get_gemac_if_properties
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c | 91 ++++++++++++++-----------
- 1 file changed, 50 insertions(+), 41 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-+++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-@@ -20,12 +20,12 @@
- 
- struct ls1012a_pfe_platform_data pfe_platform_data;
- 
--static int pfe_get_gemac_if_proprties(struct device_node *parent, int port, int
-+static int pfe_get_gemac_if_properties(struct device_node *parent, int port, int
- 					if_cnt,
- 					struct ls1012a_pfe_platform_data
- 					*pdata)
- {
--	struct device_node *gem = NULL, *phy = NULL;
-+	struct device_node *gem = NULL, *phy = NULL, *phy_node = NULL;
- 	int size;
- 	int ii = 0, phy_id = 0;
- 	const u32 *addr;
-@@ -49,12 +49,6 @@ static int pfe_get_gemac_if_proprties(st
- 
- 	of_get_mac_address(gem, pdata->ls1012a_eth_pdata[port].mac_addr);
- 
--	pdata->ls1012a_eth_pdata[port].mii_config = of_get_phy_mode(gem);
--
--	if ((pdata->ls1012a_eth_pdata[port].mii_config) < 0)
--		pr_err("%s:%d Incorrect Phy mode....\n", __func__,
--		       __LINE__);
--
- 	addr = of_get_property(gem, "fsl,gemac-bus-id", &size);
- 	if (!addr)
- 		pr_err("%s:%d Invalid gemac-bus-id....\n", __func__,
-@@ -62,16 +56,55 @@ static int pfe_get_gemac_if_proprties(st
- 	else
- 		pdata->ls1012a_eth_pdata[port].bus_id = be32_to_cpup(addr);
- 
--	addr = of_get_property(gem, "fsl,gemac-phy-id", &size);
--	if (!addr) {
--		pr_err("%s:%d Invalid gemac-phy-id....\n", __func__,
--		       __LINE__);
-+	phy_node = of_parse_phandle(gem, "phy-handle", 0);
-+	pdata->ls1012a_eth_pdata[port].phy_node = phy_node;
-+	if (phy_node) {
-+		goto process_phynode;
-+	} else if (of_phy_is_fixed_link(gem)) {
-+		if (of_phy_register_fixed_link(gem) < 0) {
-+			pr_err("broken fixed-link specification\n");
-+			goto err;
-+		}
-+		phy_node = of_node_get(gem);
-+		pdata->ls1012a_eth_pdata[port].phy_node = phy_node;
-+	} else if (of_get_property(gem, "fsl,pfe-phy-if-flags", &size)) {
-+		/* Use old dts properties for phy handling */
-+		addr = of_get_property(gem, "fsl,pfe-phy-if-flags", &size);
-+		pdata->ls1012a_eth_pdata[port].phy_flags = be32_to_cpup(addr);
-+
-+		addr = of_get_property(gem, "fsl,gemac-phy-id", &size);
-+		if (!addr) {
-+			pr_err("%s:%d Invalid gemac-phy-id....\n", __func__,
-+			       __LINE__);
-+		} else {
-+			phy_id = be32_to_cpup(addr);
-+			pdata->ls1012a_eth_pdata[port].phy_id = phy_id;
-+			pdata->ls1012a_mdio_pdata[0].phy_mask &= ~(1 << phy_id);
-+		}
-+
-+		/* If PHY is enabled, read mdio properties */
-+		if (pdata->ls1012a_eth_pdata[port].phy_flags & GEMAC_NO_PHY)
-+			goto done;
-+
-+		phy = of_get_next_child(gem, NULL);
-+		addr = of_get_property(phy, "reg", &size);
-+		if (!addr)
-+			pr_err("%s:%d Invalid phy enable flag....\n",
-+			       __func__, __LINE__);
-+		else
-+			pdata->ls1012a_mdio_pdata[port].enabled =
-+							be32_to_cpup(addr);
- 	} else {
--		phy_id = be32_to_cpup(addr);
--		pdata->ls1012a_eth_pdata[port].phy_id = phy_id;
--		pdata->ls1012a_mdio_pdata[0].phy_mask &= ~(1 << phy_id);
-+		pr_info("%s: No PHY or fixed-link\n", __func__);
-+		return 0;
- 	}
- 
-+process_phynode:
-+	pdata->ls1012a_eth_pdata[port].mii_config = of_get_phy_mode(gem);
-+	if ((pdata->ls1012a_eth_pdata[port].mii_config) < 0)
-+		pr_err("%s:%d Incorrect Phy mode....\n", __func__,
-+		       __LINE__);
-+
- 	addr = of_get_property(gem, "fsl,mdio-mux-val", &size);
- 	if (!addr) {
- 		pr_err("%s: Invalid mdio-mux-val....\n", __func__);
-@@ -84,33 +117,10 @@ static int pfe_get_gemac_if_proprties(st
- 		pfe->mdio_muxval[pdata->ls1012a_eth_pdata[port].phy_id] =
- 			 pdata->ls1012a_eth_pdata[port].mdio_muxval;
- 
--	addr = of_get_property(gem, "fsl,pfe-phy-if-flags", &size);
--	if (!addr)
--		pr_err("%s:%d Invalid pfe-phy-if-flags....\n",
--		       __func__, __LINE__);
--	else
--		pdata->ls1012a_eth_pdata[port].phy_flags = be32_to_cpup(addr);
--
--	/* If PHY is enabled, read mdio properties */
--	if (pdata->ls1012a_eth_pdata[port].phy_flags & GEMAC_NO_PHY)
--		goto done;
--
--	phy = of_get_next_child(gem, NULL);
--
--	addr = of_get_property(phy, "reg", &size);
--
--	if (!addr)
--		pr_err("%s:%d Invalid phy enable flag....\n",
--		       __func__, __LINE__);
--	else
--		pdata->ls1012a_mdio_pdata[port].enabled = be32_to_cpup(addr);
- 
- 	pdata->ls1012a_mdio_pdata[port].irq[0] = PHY_POLL;
- 
- done:
--	if (of_phy_is_fixed_link(gem))
--		pdata->ls1012a_eth_pdata[port].phy_node = of_node_get(gem);
--
- 	return 0;
- 
- err:
-@@ -212,8 +222,8 @@ static int pfe_platform_probe(struct pla
- 	pfe_platform_data.ls1012a_mdio_pdata[0].phy_mask = 0xffffffff;
- 
- 	for (ii = 0; ii < interface_count; ii++) {
--		pfe_get_gemac_if_proprties(np, ii, interface_count,
--					   &pfe_platform_data);
-+		pfe_get_gemac_if_properties(np, ii, interface_count,
-+					    &pfe_platform_data);
- 	}
- 
- 	pfe->dev = &pdev->dev;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0314-staging-fsl_ppfe-eth-support-single-interface-initia.patch b/target/linux/layerscape/patches-5.4/701-net-0314-staging-fsl_ppfe-eth-support-single-interface-initia.patch
deleted file mode 100644
index fefe863647..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0314-staging-fsl_ppfe-eth-support-single-interface-initia.patch
+++ /dev/null
@@ -1,271 +0,0 @@
-From dff5fdd84a9ace2d9b8b56659c0855542829148a Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Fri, 23 Nov 2018 23:58:28 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: support single interface
- initialization
-
-- arrange members of struct mii_bus in sequence matching phy.h
-- if mdio node is defined, use of_mdiobus_register to register
-  child nodes (phy devices) available on the mdio bus.
-- remove of_phy_register_fixed_link from pfe_phy_init as it is being
-  handled in pfe_get_gemac_if_properties
-- remove mdio enabled check
-- skip phy init, if no PHY or fixed-link
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c              | 110 +++++++++++++-----------
- drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c |   4 +
- 2 files changed, 66 insertions(+), 48 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -47,6 +47,7 @@
- 
- #define LS1012A_REV_1_0		0x87040010
- 
-+bool pfe_use_old_dts_phy;
- bool pfe_errata_a010897;
- 
- static void *cbus_emac_base[3];
-@@ -950,7 +951,8 @@ static int pfe_eth_mdio_init(struct pfe_
- 			     struct ls1012a_mdio_platform_data *minfo)
- {
- 	struct mii_bus *bus;
--	int rc, ii;
-+	struct device_node *mdio_node;
-+	int rc = 0, ii;
- 	struct phy_device *phydev;
- 
- 	netif_info(priv, drv, priv->ndev, "%s\n", __func__);
-@@ -964,25 +966,30 @@ static int pfe_eth_mdio_init(struct pfe_
- 	}
- 
- 	bus->name = "ls1012a MDIO Bus";
-+	snprintf(bus->id, MII_BUS_ID_SIZE, "ls1012a-%x", priv->id);
-+
-+	bus->priv = priv;
- 	bus->read = &pfe_eth_mdio_read;
- 	bus->write = &pfe_eth_mdio_write;
- 	bus->reset = &pfe_eth_mdio_reset;
--	snprintf(bus->id, MII_BUS_ID_SIZE, "ls1012a-%x", priv->id);
--	bus->priv = priv;
--
-+	bus->parent = priv->pfe->dev;
- 	bus->phy_mask = minfo->phy_mask;
--	priv->mdc_div = minfo->mdc_div;
-+	bus->irq[0] = minfo->irq[0];
- 
-+	priv->mdc_div = minfo->mdc_div;
- 	if (!priv->mdc_div)
- 		priv->mdc_div = 64;
--
--	bus->irq[0] = minfo->irq[0];
--
--	bus->parent = priv->pfe->dev;
--
- 	netif_info(priv, drv, priv->ndev, "%s: mdc_div: %d, phy_mask: %x\n",
- 		   __func__, priv->mdc_div, bus->phy_mask);
--	rc = mdiobus_register(bus);
-+
-+	mdio_node = of_get_child_by_name(priv->pfe->dev->of_node, "mdio");
-+	if (mdio_node) {
-+		rc = of_mdiobus_register(bus, mdio_node);
-+		of_node_put(mdio_node);
-+	} else {
-+		rc = mdiobus_register(bus);
-+	}
-+
- 	if (rc) {
- 		netdev_err(priv->ndev, "mdiobus_register(%s) failed\n",
- 			   bus->name);
-@@ -995,7 +1002,6 @@ static int pfe_eth_mdio_init(struct pfe_
- 	 * 3rd argument as true and then register the phy device
- 	 * via phy_device_register()
- 	 */
--
- 	if (priv->einfo->mii_config == PHY_INTERFACE_MODE_2500SGMII) {
- 		for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) {
- 			phydev = get_phy_device(priv->mii_bus,
-@@ -1268,8 +1274,6 @@ static int pfe_phy_init(struct net_devic
- 	char phy_id[MII_BUS_ID_SIZE + 3];
- 	char bus_id[MII_BUS_ID_SIZE];
- 	phy_interface_t interface;
--	struct device_node *phy_node;
--	int rc;
- 
- 	priv->oldlink = 0;
- 	priv->oldspeed = 0;
-@@ -1278,7 +1282,6 @@ static int pfe_phy_init(struct net_devic
- 	snprintf(bus_id, MII_BUS_ID_SIZE, "ls1012a-%d", 0);
- 	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
- 		 priv->einfo->phy_id);
--
- 	netif_info(priv, drv, ndev, "%s: %s\n", __func__, phy_id);
- 	interface = priv->einfo->mii_config;
- 	if ((interface == PHY_INTERFACE_MODE_SGMII) ||
-@@ -1301,23 +1304,22 @@ static int pfe_phy_init(struct net_devic
- 	priv->oldduplex = -1;
- 	pr_info("%s interface %x\n", __func__, interface);
- 
--	if (of_phy_is_fixed_link(priv->phy_node)) {
--		rc = of_phy_register_fixed_link(priv->phy_node);
--		if (rc)
--			return rc;
--		phy_node = of_node_get(priv->phy_node);
--		phydev = of_phy_connect(ndev, phy_node, pfe_eth_adjust_link, 0,
-+	if (priv->phy_node) {
-+		phydev = of_phy_connect(ndev, priv->phy_node,
-+					pfe_eth_adjust_link, 0,
- 					priv->einfo->mii_config);
--		of_node_put(phy_node);
-+		if (!(phydev)) {
-+			netdev_err(ndev, "Unable to connect to phy\n");
-+			return -ENODEV;
-+		}
- 
- 	} else {
- 		phydev = phy_connect(ndev, phy_id,
- 				     &pfe_eth_adjust_link, interface);
--	}
--
--	if (IS_ERR(phydev)) {
--		netdev_err(ndev, "phy_connect() failed\n");
--		return PTR_ERR(phydev);
-+		if (IS_ERR(phydev)) {
-+			netdev_err(ndev, "Unable to connect to phy\n");
-+			return PTR_ERR(phydev);
-+		}
- 	}
- 
- 	priv->phydev = phydev;
-@@ -2411,13 +2413,10 @@ static int pfe_eth_init_one(struct pfe *
- 	memcpy(ndev->dev_addr, einfo[id].mac_addr, ETH_ALEN);
- 
- 	/* Initialize mdio */
--	if (minfo[id].enabled) {
--		err = pfe_eth_mdio_init(priv, &minfo[id]);
--		if (err) {
--			netdev_err(ndev, "%s: pfe_eth_mdio_init() failed\n",
--				   __func__);
--			goto err2;
--		}
-+	err = pfe_eth_mdio_init(priv, &minfo[id]);
-+	if (err) {
-+		netdev_err(ndev, "%s: pfe_eth_mdio_init() failed\n", __func__);
-+		goto err1;
- 	}
- 
- 	if (us)
-@@ -2462,22 +2461,26 @@ static int pfe_eth_init_one(struct pfe *
- 		       HIF_RX_POLL_WEIGHT - 16);
- 
- 	err = register_netdev(ndev);
--
- 	if (err) {
- 		netdev_err(ndev, "register_netdev() failed\n");
--		goto err3;
-+		goto err2;
-+	}
-+
-+	if ((!(pfe_use_old_dts_phy) && !(priv->phy_node)) ||
-+	    ((pfe_use_old_dts_phy) &&
-+	      (priv->einfo->phy_flags & GEMAC_NO_PHY))) {
-+		pr_info("%s: No PHY or fixed-link\n", __func__);
-+		goto skip_phy_init;
- 	}
- 
- phy_init:
- 	device_init_wakeup(&ndev->dev, WAKE_MAGIC);
- 
--	if (!(priv->einfo->phy_flags & GEMAC_NO_PHY)) {
--		err = pfe_phy_init(ndev);
--		if (err) {
--			netdev_err(ndev, "%s: pfe_phy_init() failed\n",
--				   __func__);
--			goto err4;
--		}
-+	err = pfe_phy_init(ndev);
-+	if (err) {
-+		netdev_err(ndev, "%s: pfe_phy_init() failed\n",
-+			   __func__);
-+		goto err3;
- 	}
- 
- 	if (us) {
-@@ -2488,6 +2491,7 @@ phy_init:
- 
- 	netif_carrier_on(ndev);
- 
-+skip_phy_init:
- 	/* Create all the sysfs files */
- 	if (pfe_eth_sysfs_init(ndev))
- 		goto err4;
-@@ -2496,13 +2500,16 @@ phy_init:
- 		   __func__, priv->EMAC_baseaddr);
- 
- 	return 0;
-+
- err4:
-+	pfe_phy_exit(priv->ndev);
-+err3:
- 	if (us)
--		goto err3;
-+		goto err2;
- 	unregister_netdev(ndev);
--err3:
--	pfe_eth_mdio_exit(priv->mii_bus);
- err2:
-+	pfe_eth_mdio_exit(priv->mii_bus);
-+err1:
- 	free_netdev(priv->ndev);
- err0:
- 	return err;
-@@ -2553,9 +2560,16 @@ static void pfe_eth_exit_one(struct pfe_
- 	if (!us)
- 		pfe_eth_sysfs_exit(priv->ndev);
- 
--	if (!(priv->einfo->phy_flags & GEMAC_NO_PHY))
--		pfe_phy_exit(priv->ndev);
-+	if ((!(pfe_use_old_dts_phy) && !(priv->phy_node)) ||
-+	    ((pfe_use_old_dts_phy) &&
-+	      (priv->einfo->phy_flags & GEMAC_NO_PHY))) {
-+		pr_info("%s: No PHY or fixed-link\n", __func__);
-+		goto skip_phy_exit;
-+	}
-+
-+	pfe_phy_exit(priv->ndev);
- 
-+skip_phy_exit:
- 	if (!us)
- 		unregister_netdev(priv->ndev);
- 
---- a/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-+++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-@@ -18,6 +18,7 @@
- 
- #include "pfe_mod.h"
- 
-+extern bool pfe_use_old_dts_phy;
- struct ls1012a_pfe_platform_data pfe_platform_data;
- 
- static int pfe_get_gemac_if_properties(struct device_node *parent, int port, int
-@@ -59,8 +60,10 @@ static int pfe_get_gemac_if_properties(s
- 	phy_node = of_parse_phandle(gem, "phy-handle", 0);
- 	pdata->ls1012a_eth_pdata[port].phy_node = phy_node;
- 	if (phy_node) {
-+		pfe_use_old_dts_phy = false;
- 		goto process_phynode;
- 	} else if (of_phy_is_fixed_link(gem)) {
-+		pfe_use_old_dts_phy = false;
- 		if (of_phy_register_fixed_link(gem) < 0) {
- 			pr_err("broken fixed-link specification\n");
- 			goto err;
-@@ -68,6 +71,7 @@ static int pfe_get_gemac_if_properties(s
- 		phy_node = of_node_get(gem);
- 		pdata->ls1012a_eth_pdata[port].phy_node = phy_node;
- 	} else if (of_get_property(gem, "fsl,pfe-phy-if-flags", &size)) {
-+		pfe_use_old_dts_phy = true;
- 		/* Use old dts properties for phy handling */
- 		addr = of_get_property(gem, "fsl,pfe-phy-if-flags", &size);
- 		pdata->ls1012a_eth_pdata[port].phy_flags = be32_to_cpup(addr);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0315-net-fsl_ppfe-update-dts-properties-for-phy.patch b/target/linux/layerscape/patches-5.4/701-net-0315-net-fsl_ppfe-update-dts-properties-for-phy.patch
deleted file mode 100644
index 6c74496ec8..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0315-net-fsl_ppfe-update-dts-properties-for-phy.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From 153d669864c9280698641a6708c5ddcffbfeda26 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Tue, 20 Nov 2018 21:51:53 +0530
-Subject: [PATCH] net: fsl_ppfe: update dts properties for phy
-
-Use commonly used phy-handle property and mdio subnode to handle
-phy properties.
-
-Deprecate bindings fsl,gemac-phy-id & fsl,pfe-phy-if-flags.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- .../devicetree/bindings/net/fsl_ppfe/pfe.txt       | 60 ++++++++++++++++------
- 1 file changed, 43 insertions(+), 17 deletions(-)
-
---- a/Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
-+++ b/Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
-@@ -127,11 +127,12 @@ PROPERTIES
- 		Definition: Must be present. Value should be the id of the bus
- 		connected to gemac.
- 
--- fsl,gemac-phy-id
--		Usage: required
--		Value type: <u32>
--		Definition: Must be present. Value should be the id of the phy
--		connected to gemac.
-+- fsl,gemac-phy-id (deprecated binding)
-+               Usage: required
-+               Value type: <u32>
-+               Definition: This binding shouldn't be used with new platforms.
-+	       Must be present. Value should be the id of the phy
-+               connected to gemac.
- 
- - fsl,mdio-mux-val
- 		Usage: required
-@@ -144,15 +145,20 @@ PROPERTIES
- 		Value type: <string>
- 		Definition: Must include "sgmii"
- 
--- fsl,pfe-phy-if-flags
--		Usage: required
--		Value type: <u32>
--		Definition: Must be present. Value should be 0 by default.
--		If there is not phy connected, this need to be 1.
-+- fsl,pfe-phy-if-flags (deprecated binding)
-+               Usage: required
-+               Value type: <u32>
-+               Definition: This binding shouldn't be used with new platforms.
-+               Must be present. Value should be 0 by default.
-+               If there is not phy connected, this need to be 1.
-+
-+- phy-handle
-+		Usage: optional
-+		Value type: <phandle>
-+		Definition: phandle to the PHY device connected to this device.
- 
--- mdio
--		optional subnode that specifies the mdio bus. This has reg
--		property which is used to enable/disable the mdio bus.
-+- mdio : A required subnode which specifies the mdio bus in the PFE and used as
-+a container for phy nodes according to ../phy.txt.
- 
- EXAMPLE
- 
-@@ -162,12 +168,32 @@ ethernet@0 {
- 	#size-cells = <0>;
- 	reg = <0x0>;	/* GEM_ID */
- 	fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
--	fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
- 	fsl,mdio-mux-val = <0x0>;
- 	phy-mode = "sgmii";
--	fsl,pfe-phy-if-flags = <0x0>;
-+	phy-handle = <&sgmii_phy1>;
-+};
-+
-+
-+ethernet@1 {
-+	compatible = "fsl,pfe-gemac-port";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	reg = <0x1>;	/* GEM_ID */
-+	fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
-+	fsl,mdio-mux-val = <0x0>;
-+	phy-mode = "sgmii";
-+	phy-handle = <&sgmii_phy2>;
-+};
-+
-+mdio@0 {
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	sgmii_phy1: ethernet-phy@2 {
-+		reg = <0x2>;
-+	};
- 
--	mdio@0 {
--		reg = <0x1>; /* enabled/disabled */
-+	sgmii_phy2: ethernet-phy@1 {
-+		reg = <0x1>;
- 	};
- };
diff --git a/target/linux/layerscape/patches-5.4/701-net-0316-staging-fsl_ppfe-eth-remove-unused-code.patch b/target/linux/layerscape/patches-5.4/701-net-0316-staging-fsl_ppfe-eth-remove-unused-code.patch
deleted file mode 100644
index 32211953a5..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0316-staging-fsl_ppfe-eth-remove-unused-code.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 4fa4a610e4c37741aa1d7763762f2231e4ca1d1d Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Fri, 7 Dec 2018 19:30:03 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: remove unused code
-
-- remove gemac-bus-id related code that is unused.
-- remove unused prototype gemac_set_mdc_div.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/include/pfe/pfe.h      | 1 -
- drivers/staging/fsl_ppfe/pfe_eth.h              | 1 -
- drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c | 7 -------
- 3 files changed, 9 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/include/pfe/pfe.h
-+++ b/drivers/staging/fsl_ppfe/include/pfe/pfe.h
-@@ -268,7 +268,6 @@ enum mac_loop {LB_NONE, LB_EXT, LB_LOCAL
- void gemac_init(void *base, void *config);
- void gemac_disable_rx_checksum_offload(void *base);
- void gemac_enable_rx_checksum_offload(void *base);
--void gemac_set_mdc_div(void *base, int mdc_div);
- void gemac_set_speed(void *base, enum mac_speed gem_speed);
- void gemac_set_duplex(void *base, int duplex);
- void gemac_set_mode(void *base, int mode);
---- a/drivers/staging/fsl_ppfe/pfe_eth.h
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.h
-@@ -41,7 +41,6 @@ struct ls1012a_eth_platform_data {
- 	u32 mii_config;
- 	u32 phy_flags;
- 	u32 gem_id;
--	u32 bus_id;
- 	u32 phy_id;
- 	u32 mdio_muxval;
- 	u8 mac_addr[ETH_ALEN];
---- a/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-+++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-@@ -50,13 +50,6 @@ static int pfe_get_gemac_if_properties(s
- 
- 	of_get_mac_address(gem, pdata->ls1012a_eth_pdata[port].mac_addr);
- 
--	addr = of_get_property(gem, "fsl,gemac-bus-id", &size);
--	if (!addr)
--		pr_err("%s:%d Invalid gemac-bus-id....\n", __func__,
--		       __LINE__);
--	else
--		pdata->ls1012a_eth_pdata[port].bus_id = be32_to_cpup(addr);
--
- 	phy_node = of_parse_phandle(gem, "phy-handle", 0);
- 	pdata->ls1012a_eth_pdata[port].phy_node = phy_node;
- 	if (phy_node) {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0317-staging-fsl_ppfe-eth-separate-mdio-init-from-mac-ini.patch b/target/linux/layerscape/patches-5.4/701-net-0317-staging-fsl_ppfe-eth-separate-mdio-init-from-mac-ini.patch
deleted file mode 100644
index 74fb01ce0b..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0317-staging-fsl_ppfe-eth-separate-mdio-init-from-mac-ini.patch
+++ /dev/null
@@ -1,650 +0,0 @@
-From 8848f975ce42674b8bc8dedb5c7b326a42088e99 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Mon, 10 Dec 2018 10:22:33 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: separate mdio init from mac init
-
-- separate mdio initialization from mac initialization
-- Define pfe_mdio_priv_s structure to hold mii_bus structure and other
-  related data.
-- Modify functions to work with the separted mdio init model.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c              | 232 ++++++++++--------------
- drivers/staging/fsl_ppfe/pfe_eth.h              |  17 +-
- drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c |  50 ++---
- drivers/staging/fsl_ppfe/pfe_mod.h              |   1 +
- 4 files changed, 126 insertions(+), 174 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -790,10 +790,9 @@ const struct ethtool_ops pfe_ethtool_ops
-  */
- int pfe_eth_mdio_reset(struct mii_bus *bus)
- {
--	struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv;
-+	struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv;
- 	u32 phy_speed;
- 
--	netif_info(priv, hw, priv->ndev, "%s\n", __func__);
- 
- 	mutex_lock(&bus->mdio_lock);
- 
-@@ -806,25 +805,25 @@ int pfe_eth_mdio_reset(struct mii_bus *b
- 	phy_speed = (DIV_ROUND_UP((pfe->ctrl.sys_clk * 1000), 4000000)
- 		     << EMAC_MII_SPEED_SHIFT);
- 	phy_speed |= EMAC_HOLDTIME(0x5);
--	__raw_writel(phy_speed, priv->PHY_baseaddr + EMAC_MII_CTRL_REG);
-+	__raw_writel(phy_speed, priv->mdio_base + EMAC_MII_CTRL_REG);
- 
- 	mutex_unlock(&bus->mdio_lock);
- 
- 	return 0;
- }
- 
--/* pfe_eth_gemac_phy_timeout
-+/* pfe_eth_mdio_timeout
-  *
-  */
--static int pfe_eth_gemac_phy_timeout(struct pfe_eth_priv_s *priv, int timeout)
-+static int pfe_eth_mdio_timeout(struct pfe_mdio_priv_s *priv, int timeout)
- {
--	while (!(__raw_readl(priv->PHY_baseaddr + EMAC_IEVENT_REG) &
-+	while (!(__raw_readl(priv->mdio_base + EMAC_IEVENT_REG) &
- 			EMAC_IEVENT_MII)) {
- 		if (timeout-- <= 0)
- 			return -1;
- 		usleep_range(10, 20);
- 	}
--	__raw_writel(EMAC_IEVENT_MII, priv->PHY_baseaddr + EMAC_IEVENT_REG);
-+	__raw_writel(EMAC_IEVENT_MII, priv->mdio_base + EMAC_IEVENT_REG);
- 	return 0;
- }
- 
-@@ -856,16 +855,15 @@ static int pfe_eth_mdio_mux(u8 muxval)
- static int pfe_eth_mdio_write_addr(struct mii_bus *bus, int mii_id,
- 				   int dev_addr, int regnum)
- {
--	struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv;
-+	struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv;
- 
- 	__raw_writel(EMAC_MII_DATA_PA(mii_id) |
- 		     EMAC_MII_DATA_RA(dev_addr) |
- 		     EMAC_MII_DATA_TA | EMAC_MII_DATA(regnum),
--		     priv->PHY_baseaddr + EMAC_MII_DATA_REG);
-+		     priv->mdio_base + EMAC_MII_DATA_REG);
- 
--	if (pfe_eth_gemac_phy_timeout(priv, EMAC_MDIO_TIMEOUT)) {
--		netdev_err(priv->ndev, "%s: phy MDIO address write timeout\n",
--			   __func__);
-+	if (pfe_eth_mdio_timeout(priv, EMAC_MDIO_TIMEOUT)) {
-+		dev_err(&bus->dev, "phy MDIO address write timeout\n");
- 		return -1;
- 	}
- 
-@@ -875,7 +873,7 @@ static int pfe_eth_mdio_write_addr(struc
- static int pfe_eth_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
- 			      u16 value)
- {
--	struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv;
-+	struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv;
- 
- 	/*To access external PHYs on QDS board mux needs to be configured*/
- 	if ((mii_id) && (pfe->mdio_muxval[mii_id]))
-@@ -888,30 +886,26 @@ static int pfe_eth_mdio_write(struct mii
- 			     EMAC_MII_DATA_PA(mii_id) |
- 			     EMAC_MII_DATA_RA((regnum >> 16) & 0x1f) |
- 			     EMAC_MII_DATA_TA | EMAC_MII_DATA(value),
--			     priv->PHY_baseaddr + EMAC_MII_DATA_REG);
-+			     priv->mdio_base + EMAC_MII_DATA_REG);
- 	} else {
- 		/* start a write op */
- 		__raw_writel(EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_WR |
- 			     EMAC_MII_DATA_PA(mii_id) |
- 			     EMAC_MII_DATA_RA(regnum) |
- 			     EMAC_MII_DATA_TA | EMAC_MII_DATA(value),
--			     priv->PHY_baseaddr + EMAC_MII_DATA_REG);
-+			     priv->mdio_base + EMAC_MII_DATA_REG);
- 	}
- 
--	if (pfe_eth_gemac_phy_timeout(priv, EMAC_MDIO_TIMEOUT)) {
--		netdev_err(priv->ndev, "%s: phy MDIO write timeout\n",
--			   __func__);
-+	if (pfe_eth_mdio_timeout(priv, EMAC_MDIO_TIMEOUT)) {
-+		dev_err(&bus->dev, "%s: phy MDIO write timeout\n", __func__);
- 		return -1;
- 	}
--	netif_info(priv, hw, priv->ndev, "%s: phy %x reg %x val %x\n", __func__,
--		   mii_id, regnum, value);
--
- 	return 0;
- }
- 
- static int pfe_eth_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
- {
--	struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv;
-+	struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv;
- 	u16 value = 0;
- 
- 	/*To access external PHYs on QDS board mux needs to be configured*/
-@@ -925,65 +919,67 @@ static int pfe_eth_mdio_read(struct mii_
- 			     EMAC_MII_DATA_PA(mii_id) |
- 			     EMAC_MII_DATA_RA((regnum >> 16) & 0x1f) |
- 			     EMAC_MII_DATA_TA,
--			     priv->PHY_baseaddr + EMAC_MII_DATA_REG);
-+			     priv->mdio_base + EMAC_MII_DATA_REG);
- 	} else {
- 		/* start a read op */
- 		__raw_writel(EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_RD |
- 			     EMAC_MII_DATA_PA(mii_id) |
- 			     EMAC_MII_DATA_RA(regnum) |
--			     EMAC_MII_DATA_TA, priv->PHY_baseaddr +
-+			     EMAC_MII_DATA_TA, priv->mdio_base +
- 			     EMAC_MII_DATA_REG);
- 	}
- 
--	if (pfe_eth_gemac_phy_timeout(priv, EMAC_MDIO_TIMEOUT)) {
--		netdev_err(priv->ndev, "%s: phy MDIO read timeout\n", __func__);
-+	if (pfe_eth_mdio_timeout(priv, EMAC_MDIO_TIMEOUT)) {
-+		dev_err(&bus->dev, "%s: phy MDIO read timeout\n", __func__);
- 		return -1;
- 	}
- 
--	value = EMAC_MII_DATA(__raw_readl(priv->PHY_baseaddr +
-+	value = EMAC_MII_DATA(__raw_readl(priv->mdio_base +
- 						EMAC_MII_DATA_REG));
--	netif_info(priv, hw, priv->ndev, "%s: phy %x reg %x val %x\n", __func__,
--		   mii_id, regnum, value);
- 	return value;
- }
- 
--static int pfe_eth_mdio_init(struct pfe_eth_priv_s *priv,
--			     struct ls1012a_mdio_platform_data *minfo)
-+static int pfe_eth_mdio_init(struct pfe *pfe,
-+			     struct ls1012a_pfe_platform_data *pfe_info,
-+			     int ii)
- {
-+	struct pfe_mdio_priv_s *priv = NULL;
-+	struct ls1012a_mdio_platform_data *mdio_info;
- 	struct mii_bus *bus;
- 	struct device_node *mdio_node;
--	int rc = 0, ii;
--	struct phy_device *phydev;
-+	int rc = 0;
- 
--	netif_info(priv, drv, priv->ndev, "%s\n", __func__);
--	pr_info("%s\n", __func__);
-+	mdio_info = (struct ls1012a_mdio_platform_data *)
-+					pfe_info->ls1012a_mdio_pdata;
-+	mdio_info->id = ii;
- 
--	bus = mdiobus_alloc();
-+	bus = mdiobus_alloc_size(sizeof(struct pfe_mdio_priv_s));
- 	if (!bus) {
--		netdev_err(priv->ndev, "mdiobus_alloc() failed\n");
-+		pr_err("mdiobus_alloc() failed\n");
- 		rc = -ENOMEM;
--		goto err0;
-+		goto err_mdioalloc;
- 	}
- 
- 	bus->name = "ls1012a MDIO Bus";
--	snprintf(bus->id, MII_BUS_ID_SIZE, "ls1012a-%x", priv->id);
-+	snprintf(bus->id, MII_BUS_ID_SIZE, "ls1012a-%x", mdio_info->id);
- 
--	bus->priv = priv;
- 	bus->read = &pfe_eth_mdio_read;
- 	bus->write = &pfe_eth_mdio_write;
- 	bus->reset = &pfe_eth_mdio_reset;
--	bus->parent = priv->pfe->dev;
--	bus->phy_mask = minfo->phy_mask;
--	bus->irq[0] = minfo->irq[0];
-+	bus->parent = pfe->dev;
-+	bus->phy_mask = mdio_info->phy_mask;
-+	bus->irq[0] = mdio_info->irq[0];
-+	priv = bus->priv;
-+	priv->mdio_base = cbus_emac_base[ii];
- 
--	priv->mdc_div = minfo->mdc_div;
-+	priv->mdc_div = mdio_info->mdc_div;
- 	if (!priv->mdc_div)
- 		priv->mdc_div = 64;
--	netif_info(priv, drv, priv->ndev, "%s: mdc_div: %d, phy_mask: %x\n",
--		   __func__, priv->mdc_div, bus->phy_mask);
-+		dev_info(bus->parent, "%s: mdc_div: %d, phy_mask: %x\n",
-+			 __func__, priv->mdc_div, bus->phy_mask);
- 
--	mdio_node = of_get_child_by_name(priv->pfe->dev->of_node, "mdio");
--	if (mdio_node) {
-+	mdio_node = of_get_child_by_name(pfe->dev->of_node, "mdio");
-+	if ((mdio_info->id == 0) && mdio_node) {
- 		rc = of_mdiobus_register(bus, mdio_node);
- 		of_node_put(mdio_node);
- 	} else {
-@@ -991,56 +987,34 @@ static int pfe_eth_mdio_init(struct pfe_
- 	}
- 
- 	if (rc) {
--		netdev_err(priv->ndev, "mdiobus_register(%s) failed\n",
--			   bus->name);
--		goto err1;
-+		dev_err(bus->parent, "mdiobus_register(%s) failed\n",
-+			bus->name);
-+		goto err_mdioregister;
- 	}
- 
- 	priv->mii_bus = bus;
--
--	/* For clause 45 we need to call get_phy_device() with it's
--	 * 3rd argument as true and then register the phy device
--	 * via phy_device_register()
--	 */
--	if (priv->einfo->mii_config == PHY_INTERFACE_MODE_2500SGMII) {
--		for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) {
--			phydev = get_phy_device(priv->mii_bus,
--					priv->einfo->phy_id + ii, true);
--			if (!phydev || IS_ERR(phydev)) {
--				rc = -EIO;
--				netdev_err(priv->ndev, "fail to get device\n");
--				goto err1;
--			}
--			rc = phy_device_register(phydev);
--			if (rc) {
--				phy_device_free(phydev);
--				netdev_err(priv->ndev,
--					"phy_device_register() failed\n");
--				goto err1;
--			}
--		}
--	}
-+	pfe->mdio.mdio_priv[ii] = priv;
- 
- 	pfe_eth_mdio_reset(bus);
- 
- 	return 0;
- 
--err1:
-+err_mdioregister:
- 	mdiobus_free(bus);
--err0:
-+err_mdioalloc:
- 	return rc;
- }
- 
- /* pfe_eth_mdio_exit
-  */
--static void pfe_eth_mdio_exit(struct mii_bus *bus)
-+static void pfe_eth_mdio_exit(struct pfe *pfe,
-+			      int ii)
- {
-+	struct pfe_mdio_priv_s *mdio_priv = pfe->mdio.mdio_priv[ii];
-+	struct mii_bus *bus = mdio_priv->mii_bus;
-+
- 	if (!bus)
- 		return;
--
--	netif_info((struct pfe_eth_priv_s *)bus->priv, drv, ((struct
--			pfe_eth_priv_s *)(bus->priv))->ndev, "%s\n", __func__);
--
- 	mdiobus_unregister(bus);
- 	mdiobus_free(bus);
- }
-@@ -1221,15 +1195,16 @@ static int pfe_eth_start(struct pfe_eth_
-  */
- static void ls1012a_configure_serdes(struct net_device *ndev)
- {
--	struct pfe_eth_priv_s *priv = pfe->eth.eth_priv[0];
-+	struct pfe_eth_priv_s *eth_priv = netdev_priv(ndev);
-+	struct pfe_mdio_priv_s *mdio_priv = pfe->mdio.mdio_priv[eth_priv->id];
- 	int sgmii_2500 = 0;
--	struct mii_bus *bus = priv->mii_bus;
-+	struct mii_bus *bus = mdio_priv->mii_bus;
- 	u16 value = 0;
- 
--	if (priv->einfo->mii_config == PHY_INTERFACE_MODE_2500SGMII)
-+	if (eth_priv->einfo->mii_config == PHY_INTERFACE_MODE_2500SGMII)
- 		sgmii_2500 = 1;
- 
--	netif_info(priv, drv, ndev, "%s\n", __func__);
-+	netif_info(eth_priv, drv, ndev, "%s\n", __func__);
- 	/* PCS configuration done with corresponding GEMAC */
- 
- 	pfe_eth_mdio_read(bus, 0, MDIO_SGMII_CR);
-@@ -2333,26 +2308,15 @@ static const struct net_device_ops pfe_n
- 
- /* pfe_eth_init_one
-  */
--static int pfe_eth_init_one(struct pfe *pfe, int id)
-+static int pfe_eth_init_one(struct pfe *pfe,
-+			    struct ls1012a_pfe_platform_data *pfe_info,
-+			    int id)
- {
- 	struct net_device *ndev = NULL;
- 	struct pfe_eth_priv_s *priv = NULL;
- 	struct ls1012a_eth_platform_data *einfo;
--	struct ls1012a_mdio_platform_data *minfo;
--	struct ls1012a_pfe_platform_data *pfe_info;
- 	int err;
- 
--	/* Extract pltform data */
--	pfe_info = (struct ls1012a_pfe_platform_data *)
--					pfe->dev->platform_data;
--	if (!pfe_info) {
--		pr_err(
--			"%s: pfe missing additional platform data\n"
--			, __func__);
--		err = -ENODEV;
--		goto err0;
--	}
--
- 	einfo = (struct ls1012a_eth_platform_data *)
- 				pfe_info->ls1012a_eth_pdata;
- 
-@@ -2365,18 +2329,6 @@ static int pfe_eth_init_one(struct pfe *
- 		goto err0;
- 	}
- 
--	minfo = (struct ls1012a_mdio_platform_data *)
--				pfe_info->ls1012a_mdio_pdata;
--
--	/* einfo never be NULL, but no harm in having this check */
--	if (!minfo) {
--		pr_err(
--			"%s: pfe missing additional mdios platform data\n",
--			 __func__);
--		err = -ENODEV;
--		goto err0;
--	}
--
- 	if (us)
- 		emac_txq_cnt = EMAC_TXQ_CNT;
- 	/* Create an ethernet device instance */
-@@ -2402,7 +2354,6 @@ static int pfe_eth_init_one(struct pfe *
- 	/* Set the info in the priv to the current info */
- 	priv->einfo = &einfo[id];
- 	priv->EMAC_baseaddr = cbus_emac_base[id];
--	priv->PHY_baseaddr = cbus_emac_base[0];
- 	priv->GPI_baseaddr = cbus_gpi_base[id];
- 
- 	spin_lock_init(&priv->lock);
-@@ -2412,13 +2363,6 @@ static int pfe_eth_init_one(struct pfe *
- 	/* Copy the station address into the dev structure, */
- 	memcpy(ndev->dev_addr, einfo[id].mac_addr, ETH_ALEN);
- 
--	/* Initialize mdio */
--	err = pfe_eth_mdio_init(priv, &minfo[id]);
--	if (err) {
--		netdev_err(ndev, "%s: pfe_eth_mdio_init() failed\n", __func__);
--		goto err1;
--	}
--
- 	if (us)
- 		goto phy_init;
- 
-@@ -2463,7 +2407,7 @@ static int pfe_eth_init_one(struct pfe *
- 	err = register_netdev(ndev);
- 	if (err) {
- 		netdev_err(ndev, "register_netdev() failed\n");
--		goto err2;
-+		goto err1;
- 	}
- 
- 	if ((!(pfe_use_old_dts_phy) && !(priv->phy_node)) ||
-@@ -2480,7 +2424,7 @@ phy_init:
- 	if (err) {
- 		netdev_err(ndev, "%s: pfe_phy_init() failed\n",
- 			   __func__);
--		goto err3;
-+		goto err2;
- 	}
- 
- 	if (us) {
-@@ -2494,21 +2438,19 @@ phy_init:
- skip_phy_init:
- 	/* Create all the sysfs files */
- 	if (pfe_eth_sysfs_init(ndev))
--		goto err4;
-+		goto err3;
- 
- 	netif_info(priv, probe, ndev, "%s: created interface, baseaddr: %p\n",
- 		   __func__, priv->EMAC_baseaddr);
- 
- 	return 0;
- 
--err4:
--	pfe_phy_exit(priv->ndev);
- err3:
-+	pfe_phy_exit(priv->ndev);
-+err2:
- 	if (us)
--		goto err2;
-+		goto err1;
- 	unregister_netdev(ndev);
--err2:
--	pfe_eth_mdio_exit(priv->mii_bus);
- err1:
- 	free_netdev(priv->ndev);
- err0:
-@@ -2521,6 +2463,7 @@ int pfe_eth_init(struct pfe *pfe)
- {
- 	int ii = 0;
- 	int err;
-+	struct ls1012a_pfe_platform_data *pfe_info;
- 
- 	pr_info("%s\n", __func__);
- 
-@@ -2530,24 +2473,43 @@ int pfe_eth_init(struct pfe *pfe)
- 	cbus_gpi_base[0] = EGPI1_BASE_ADDR;
- 	cbus_gpi_base[1] = EGPI2_BASE_ADDR;
- 
-+	pfe_info = (struct ls1012a_pfe_platform_data *)
-+					pfe->dev->platform_data;
-+	if (!pfe_info) {
-+		pr_err("%s: pfe missing additional platform data\n", __func__);
-+		err = -ENODEV;
-+		goto err_pdata;
-+	}
-+
-+	for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) {
-+		err = pfe_eth_mdio_init(pfe, pfe_info, ii);
-+		if (err) {
-+			pr_err("%s: pfe_eth_mdio_init() failed\n", __func__);
-+			goto err_mdio_init;
-+		}
-+	}
-+
- 	if (fsl_guts_get_svr() == LS1012A_REV_1_0)
- 		pfe_errata_a010897 = true;
- 	else
- 		pfe_errata_a010897 = false;
- 
- 	for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) {
--		err = pfe_eth_init_one(pfe, ii);
-+		err = pfe_eth_init_one(pfe, pfe_info, ii);
- 		if (err)
--			goto err0;
-+			goto err_eth_init;
- 	}
- 
- 	return 0;
- 
--err0:
--	while (ii--)
-+err_eth_init:
-+	while (ii--) {
- 		pfe_eth_exit_one(pfe->eth.eth_priv[ii]);
-+		pfe_eth_mdio_exit(pfe, ii);
-+	}
- 
--	/* Register three network devices in the kernel */
-+err_mdio_init:
-+err_pdata:
- 	return err;
- }
- 
-@@ -2573,9 +2535,6 @@ skip_phy_exit:
- 	if (!us)
- 		unregister_netdev(priv->ndev);
- 
--	if (priv->mii_bus)
--		pfe_eth_mdio_exit(priv->mii_bus);
--
- 	free_netdev(priv->ndev);
- }
- 
-@@ -2589,4 +2548,7 @@ void pfe_eth_exit(struct pfe *pfe)
- 
- 	for (ii = NUM_GEMAC_SUPPORT - 1; ii >= 0; ii--)
- 		pfe_eth_exit_one(pfe->eth.eth_priv[ii]);
-+
-+	for (ii = NUM_GEMAC_SUPPORT - 1; ii >= 0; ii--)
-+		pfe_eth_mdio_exit(pfe, ii);
- }
---- a/drivers/staging/fsl_ppfe/pfe_eth.h
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.h
-@@ -48,7 +48,7 @@ struct ls1012a_eth_platform_data {
- };
- 
- struct ls1012a_mdio_platform_data {
--	int enabled;
-+	int id;
- 	int irq[32];
- 	u32 phy_mask;
- 	int mdc_div;
-@@ -120,8 +120,6 @@ struct  pfe_eth_priv_s {
- 	unsigned int		event_status;
- 	int			irq;
- 	void			*EMAC_baseaddr;
--	/* This points to the EMAC base from where we access PHY */
--	void			*PHY_baseaddr;
- 	void			*GPI_baseaddr;
- 	/* PHY stuff */
- 	struct phy_device	*phydev;
-@@ -129,9 +127,6 @@ struct  pfe_eth_priv_s {
- 	int			oldduplex;
- 	int			oldlink;
- 	struct device_node	*phy_node;
--	/* mdio info */
--	int			mdc_div;
--	struct mii_bus		*mii_bus;
- 	struct clk		*gemtx_clk;
- 	int			wol;
- 	int			pause_flag;
-@@ -161,6 +156,16 @@ struct pfe_eth {
- 	struct pfe_eth_priv_s *eth_priv[3];
- };
- 
-+struct pfe_mdio_priv_s {
-+	void __iomem *mdio_base;
-+	int			mdc_div;
-+	struct mii_bus		*mii_bus;
-+};
-+
-+struct pfe_mdio {
-+	struct pfe_mdio_priv_s *mdio_priv[3];
-+};
-+
- int pfe_eth_init(struct pfe *pfe);
- void pfe_eth_exit(struct pfe *pfe);
- int pfe_eth_suspend(struct net_device *dev);
---- a/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-+++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-@@ -21,30 +21,17 @@
- extern bool pfe_use_old_dts_phy;
- struct ls1012a_pfe_platform_data pfe_platform_data;
- 
--static int pfe_get_gemac_if_properties(struct device_node *parent, int port, int
--					if_cnt,
--					struct ls1012a_pfe_platform_data
--					*pdata)
-+static int pfe_get_gemac_if_properties(struct device_node *gem,
-+				       int port,
-+				       struct ls1012a_pfe_platform_data	*pdata)
- {
--	struct device_node *gem = NULL, *phy = NULL, *phy_node = NULL;
-+	struct device_node *phy_node = NULL;
- 	int size;
--	int ii = 0, phy_id = 0;
-+	int phy_id = 0;
- 	const u32 *addr;
- 
--	for (ii = 0; ii < if_cnt; ii++) {
--		gem = of_get_next_child(parent, gem);
--		if (!gem)
--			goto err;
--		addr = of_get_property(gem, "reg", &size);
--		if (addr && (be32_to_cpup(addr) == port))
--			break;
--	}
--
--	if (ii >= if_cnt) {
--		pr_err("%s:%d Failed to find interface = %d\n",
--		       __func__, __LINE__, if_cnt);
--		goto err;
--	}
-+	addr = of_get_property(gem, "reg", &size);
-+	port = be32_to_cpup(addr);
- 
- 	pdata->ls1012a_eth_pdata[port].gem_id = port;
- 
-@@ -83,14 +70,6 @@ static int pfe_get_gemac_if_properties(s
- 		if (pdata->ls1012a_eth_pdata[port].phy_flags & GEMAC_NO_PHY)
- 			goto done;
- 
--		phy = of_get_next_child(gem, NULL);
--		addr = of_get_property(phy, "reg", &size);
--		if (!addr)
--			pr_err("%s:%d Invalid phy enable flag....\n",
--			       __func__, __LINE__);
--		else
--			pdata->ls1012a_mdio_pdata[port].enabled =
--							be32_to_cpup(addr);
- 	} else {
- 		pr_info("%s: No PHY or fixed-link\n", __func__);
- 		return 0;
-@@ -135,7 +114,7 @@ static int pfe_platform_probe(struct pla
- 	struct resource res;
- 	int ii, rc, interface_count = 0, size = 0;
- 	const u32 *prop;
--	struct device_node  *np;
-+	struct device_node *np, *gem = NULL;
- 	struct clk *pfe_clk;
- 
- 	np = pdev->dev.of_node;
-@@ -219,8 +198,13 @@ static int pfe_platform_probe(struct pla
- 	pfe_platform_data.ls1012a_mdio_pdata[0].phy_mask = 0xffffffff;
- 
- 	for (ii = 0; ii < interface_count; ii++) {
--		pfe_get_gemac_if_properties(np, ii, interface_count,
--					    &pfe_platform_data);
-+		gem = of_get_next_child(np, gem);
-+		if (gem)
-+			pfe_get_gemac_if_properties(gem, ii,
-+						    &pfe_platform_data);
-+		else
-+			pr_err("Unable to find interface %d\n", ii);
-+
- 	}
- 
- 	pfe->dev = &pdev->dev;
-@@ -342,8 +326,8 @@ static int pfe_platform_resume(struct de
- 	for (i = 0; i < (NUM_GEMAC_SUPPORT); i++) {
- 		netdev = pfe->eth.eth_priv[i]->ndev;
- 
--		if (pfe->eth.eth_priv[i]->mii_bus)
--			pfe_eth_mdio_reset(pfe->eth.eth_priv[i]->mii_bus);
-+		if (pfe->mdio.mdio_priv[i]->mii_bus)
-+			pfe_eth_mdio_reset(pfe->mdio.mdio_priv[i]->mii_bus);
- 
- 		if (netif_running(netdev))
- 			pfe_eth_resume(netdev);
---- a/drivers/staging/fsl_ppfe/pfe_mod.h
-+++ b/drivers/staging/fsl_ppfe/pfe_mod.h
-@@ -52,6 +52,7 @@ struct pfe {
- 	struct pfe_ctrl ctrl;
- 	struct pfe_hif hif;
- 	struct pfe_eth eth;
-+	struct pfe_mdio mdio;
- 	struct hif_client_s *hif_client[HIF_CLIENTS_MAX];
- #if defined(CFG_DIAGS)
- 	struct pfe_diags diags;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0318-staging-fsl_ppfe-eth-adapt-to-link-mode-based-phydev.patch b/target/linux/layerscape/patches-5.4/701-net-0318-staging-fsl_ppfe-eth-adapt-to-link-mode-based-phydev.patch
deleted file mode 100644
index bf34d39be4..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0318-staging-fsl_ppfe-eth-adapt-to-link-mode-based-phydev.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 002297dd2634e993257a00fe4458b0288ec7baea Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Wed, 27 Mar 2019 13:25:57 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: adapt to link mode based phydev
- changes
-
-Setting link mode bits have changed with the integration of
-commit (3c1bcc8 net: ethernet: Convert phydev advertize and
-supported from u32 to link mode). Adapt to the new method of
-setting and clearing the link mode bits.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c | 24 ++++++++++++++++--------
- 1 file changed, 16 insertions(+), 8 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -701,10 +701,14 @@ static int pfe_eth_set_pauseparam(struct
- 					EGPI_PAUSE_ENABLE),
- 				priv->GPI_baseaddr + GPI_TX_PAUSE_TIME);
- 		if (priv->phydev) {
--			priv->phydev->supported |= ADVERTISED_Pause |
--							ADVERTISED_Asym_Pause;
--			priv->phydev->advertising |= ADVERTISED_Pause |
--							ADVERTISED_Asym_Pause;
-+			linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
-+					 priv->phydev->supported);
-+			linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
-+					 priv->phydev->supported);
-+			linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
-+					 priv->phydev->advertising);
-+			linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
-+					 priv->phydev->advertising);
- 		}
- 	} else {
- 		gemac_disable_pause_rx(priv->EMAC_baseaddr);
-@@ -712,10 +716,14 @@ static int pfe_eth_set_pauseparam(struct
- 					~EGPI_PAUSE_ENABLE),
- 				priv->GPI_baseaddr + GPI_TX_PAUSE_TIME);
- 		if (priv->phydev) {
--			priv->phydev->supported &= ~(ADVERTISED_Pause |
--							ADVERTISED_Asym_Pause);
--			priv->phydev->advertising &= ~(ADVERTISED_Pause |
--							ADVERTISED_Asym_Pause);
-+			linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT,
-+					   priv->phydev->supported);
-+			linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
-+					   priv->phydev->supported);
-+			linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT,
-+					   priv->phydev->advertising);
-+			linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
-+					   priv->phydev->advertising);
- 		}
- 	}
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0319-staging-fsl_ppfe-eth-use-generic-soc_device-infra-in.patch b/target/linux/layerscape/patches-5.4/701-net-0319-staging-fsl_ppfe-eth-use-generic-soc_device-infra-in.patch
deleted file mode 100644
index 11bd1fff78..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0319-staging-fsl_ppfe-eth-use-generic-soc_device-infra-in.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 3f64975a822c9144c7134d3cebadd4d8b88fead5 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Wed, 27 Mar 2019 19:31:35 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: use generic soc_device infra instead
- of fsl_guts_get_svr()
-
-Commit ("soc: fsl: guts: make fsl_guts_get_svr() static") has
-made fsl_guts_get_svr() static and hence use generic soc_device
-infrastructure to check SoC revision.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c | 12 ++++++++++--
- 1 file changed, 10 insertions(+), 2 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -35,7 +35,7 @@
- #include <linux/delay.h>
- #include <linux/regmap.h>
- #include <linux/i2c.h>
--#include <linux/fsl/guts.h>
-+#include <linux/sys_soc.h>
- 
- #if defined(CONFIG_NF_CONNTRACK_MARK)
- #include <net/netfilter/nf_conntrack.h>
-@@ -104,6 +104,14 @@ unsigned int gemac_regs[] = {
- 	0x01B0, /* Frame Truncation Length */
- };
- 
-+const struct soc_device_attribute ls1012a_rev1_soc_attr[] = {
-+	{ .family = "QorIQ LS1012A",
-+	  .soc_id = "svr:0x87040010",
-+	  .revision = "1.0",
-+	  .data = NULL },
-+	{ },
-+};
-+
- /********************************************************************/
- /*                   SYSFS INTERFACE				    */
- /********************************************************************/
-@@ -2497,7 +2505,7 @@ int pfe_eth_init(struct pfe *pfe)
- 		}
- 	}
- 
--	if (fsl_guts_get_svr() == LS1012A_REV_1_0)
-+	if (soc_device_match(ls1012a_rev1_soc_attr))
- 		pfe_errata_a010897 = true;
- 	else
- 		pfe_errata_a010897 = false;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0320-staging-fsl_ppfe-eth-use-memremap-to-map-RAM-area-us.patch b/target/linux/layerscape/patches-5.4/701-net-0320-staging-fsl_ppfe-eth-use-memremap-to-map-RAM-area-us.patch
deleted file mode 100644
index c9c3a7a888..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0320-staging-fsl_ppfe-eth-use-memremap-to-map-RAM-area-us.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 7872505a2194c9766c7986e761c0ae9bdd6e5e57 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Tue, 26 Mar 2019 16:52:22 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: use memremap() to map RAM area used by
- PFE
-
-RAM area used by PFE should be mapped using memremap() instead of
-directly traslating physical addr to virtual. This will ensure proper
-checks are done before the area is used.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c | 10 ++++++----
- 1 file changed, 6 insertions(+), 4 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-+++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-@@ -143,9 +143,10 @@ static int pfe_platform_probe(struct pla
- 	pfe->ddr_phys_baseaddr = res.start;
- 	pfe->ddr_size = resource_size(&res);
- 
--	pfe->ddr_baseaddr = phys_to_virt(res.start);
-+	pfe->ddr_baseaddr = memremap(res.start, resource_size(&res),
-+				     MEMREMAP_WB);
- 	if (!pfe->ddr_baseaddr) {
--		pr_err("ioremap() ddr failed\n");
-+		pr_err("memremap() ddr failed\n");
- 		rc = -ENOMEM;
- 		goto err_ddr;
- 	}
-@@ -235,7 +236,7 @@ err_hif_irq:
- 	iounmap(pfe->cbus_baseaddr);
- 
- err_axi:
--	iounmap(pfe->ddr_baseaddr);
-+	memunmap(pfe->ddr_baseaddr);
- 
- err_ddr:
- 	platform_set_drvdata(pdev, NULL);
-@@ -259,7 +260,8 @@ static int pfe_platform_remove(struct pl
- 	rc = pfe_remove(pfe);
- 
- 	iounmap(pfe->cbus_baseaddr);
--	iounmap(pfe->ddr_baseaddr);
-+
-+	memunmap(pfe->ddr_baseaddr);
- 
- 	platform_set_drvdata(pdev, NULL);
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0321-staging-fsl_ppfe-eth-remove-fallback-argument-from-d.patch b/target/linux/layerscape/patches-5.4/701-net-0321-staging-fsl_ppfe-eth-remove-fallback-argument-from-d.patch
deleted file mode 100644
index 9d4169e524..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0321-staging-fsl_ppfe-eth-remove-fallback-argument-from-d.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 52f6eea9b70007cb0c5d13b9268d37bfddbaf0f4 Mon Sep 17 00:00:00 2001
-From: Li Yang <leoyang.li@nxp.com>
-Date: Tue, 11 Jun 2019 18:24:37 -0500
-Subject: [PATCH] staging: fsl_ppfe/eth: remove 'fallback' argument from
- dev->ndo_select_queue()
-
-To be consistent with upstream API change.
-
-Signed-off-by: Li Yang <leoyang.li@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -1879,8 +1879,7 @@ static int pfe_eth_send_packet(struct sk
-  *
-  */
- static u16 pfe_eth_select_queue(struct net_device *ndev, struct sk_buff *skb,
--				struct net_device *sb_dev,
--				select_queue_fallback_t fallback)
-+				struct net_device *sb_dev)
- {
- 	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0322-staging-fsl_ppfe-eth-prefix-header-search-paths-with.patch b/target/linux/layerscape/patches-5.4/701-net-0322-staging-fsl_ppfe-eth-prefix-header-search-paths-with.patch
deleted file mode 100644
index 339813aeeb..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0322-staging-fsl_ppfe-eth-prefix-header-search-paths-with.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 9b280449f99b5273b52d88574c7358a874f825a3 Mon Sep 17 00:00:00 2001
-From: Ting Liu <ting.liu@nxp.com>
-Date: Mon, 17 Jun 2019 09:27:53 +0200
-Subject: [PATCH] staging: fsl_ppfe/eth: prefix header search paths with
- $(srctree)/
-
-Currently, the rules for configuring search paths in Kbuild have
-changed: https://lkml.org/lkml/2019/5/13/37
-
-This will lead the below error:
-
-fatal error: pfe/pfe.h: No such file or directory
-
-Fix it by adding $(srctree)/ prefix to the search paths.
-
-Signed-off-by: Ting Liu <ting.liu@nxp.com>
----
- drivers/staging/fsl_ppfe/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/staging/fsl_ppfe/Makefile
-+++ b/drivers/staging/fsl_ppfe/Makefile
-@@ -2,7 +2,7 @@
- # Makefile for Freesecale PPFE driver
- #
- 
--ccflags-y +=  -I$(src)/include  -I$(src)
-+ccflags-y +=  -I $(srctree)/$(src)/include  -I $(srctree)/$(src)
- 
- obj-m += pfe.o
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0323-staging-fsl_ppfe-eth-add-pfe-support-to-Kconfig-and-.patch b/target/linux/layerscape/patches-5.4/701-net-0323-staging-fsl_ppfe-eth-add-pfe-support-to-Kconfig-and-.patch
deleted file mode 100644
index d370f728dd..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0323-staging-fsl_ppfe-eth-add-pfe-support-to-Kconfig-and-.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 022999fe6c4008d1ca6ec0f33d7f7c88db97f3fa Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Wed, 1 Nov 2017 11:11:30 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: add pfe support to Kconfig and
- Makefile
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-[ Aisheng: fix minor conflict due to removed VBOXSF_FS ]
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- MAINTAINERS              | 8 ++++++++
- drivers/staging/Kconfig  | 1 +
- drivers/staging/Makefile | 1 +
- 3 files changed, 10 insertions(+)
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -6576,6 +6576,14 @@ F:	drivers/ptp/ptp_qoriq_debugfs.c
- F:	include/linux/fsl/ptp_qoriq.h
- F:	Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
- 
-+FREESCALE QORIQ PPFE ETHERNET DRIVER
-+M:	Anji Jagarlmudi <anji.jagarlmudi@nxp.com>
-+M:	Calvin Johnson <calvin.johnson@nxp.com>
-+L:	netdev@vger.kernel.org
-+S:	Maintained
-+F:	drivers/staging/fsl_ppfe
-+F:	Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
-+
- FREESCALE QUAD SPI DRIVER
- M:	Han Xu <han.xu@nxp.com>
- L:	linux-spi@vger.kernel.org
---- a/drivers/staging/Kconfig
-+++ b/drivers/staging/Kconfig
-@@ -126,5 +126,6 @@ source "drivers/staging/exfat/Kconfig"
- source "drivers/staging/qlge/Kconfig"
- 
- source "drivers/staging/fsl_qbman/Kconfig"
-+source "drivers/staging/fsl_ppfe/Kconfig"
- 
- endif # STAGING
---- a/drivers/staging/Makefile
-+++ b/drivers/staging/Makefile
-@@ -54,3 +54,4 @@ obj-$(CONFIG_USB_WUSB)		+= wusbcore/
- obj-$(CONFIG_EXFAT_FS)		+= exfat/
- obj-$(CONFIG_QLGE)		+= qlge/
- obj-$(CONFIG_FSL_SDK_DPA)      += fsl_qbman/
-+obj-$(CONFIG_FSL_PPFE)		+= fsl_ppfe/
diff --git a/target/linux/layerscape/patches-5.4/701-net-0324-staging-fsl_ppfe-eth-Disable-termination-of-CRC-fwd.patch b/target/linux/layerscape/patches-5.4/701-net-0324-staging-fsl_ppfe-eth-Disable-termination-of-CRC-fwd.patch
deleted file mode 100644
index 3d9870d78b..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0324-staging-fsl_ppfe-eth-Disable-termination-of-CRC-fwd.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 6d7e10038aba81d7273f72f36db64c71ae7f8f69 Mon Sep 17 00:00:00 2001
-From: Nagesh Koneti <koneti.nagesh@nxp.com>
-Date: Wed, 25 Sep 2019 12:01:19 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: Disable termination of CRC fwd.
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-LS1012A MAC PCS block has an erratum that is seen with specific PHY AR803x.
-The issue is triggered by the (spec-compliant) operation of the AR803x PHY
-on the LS1012A-FRWY board.Due to this, good FCS packet is reported as error
-packet by MAC, so for these error packets FCS should be validated and
-discard only real error packets in PFE Rx packet path.
-
-Signed-off-by: Nagesh Koneti <koneti.nagesh@nxp.com>
-Signed-off-by: Nagesh Koneti <“koneti.nagesh@nxp.com�>
----
- drivers/staging/fsl_ppfe/pfe_hal.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_hal.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hal.c
-@@ -860,8 +860,9 @@ void gemac_set_mode(void *base, int mode
- 	/*Remove loopbank*/
- 	val &= ~EMAC_RCNTRL_LOOP;
- 
--	/* Enable flow control and MII mode and terminate received CRC */
--	val |= (EMAC_RCNTRL_FCE | EMAC_RCNTRL_MII_MODE | EMAC_RCNTRL_CRC_FWD);
-+	/* Enable flow control and MII mode.PFE firmware always expects
-+       CRC should be forwarded by MAC to validate CRC in software.*/
-+	val |= (EMAC_RCNTRL_FCE | EMAC_RCNTRL_MII_MODE);
- 
- 	writel(val, base + EMAC_RCNTRL_REG);
- }
diff --git a/target/linux/layerscape/patches-5.4/701-net-0325-net-phy-add-10G-fixed-link-support.patch b/target/linux/layerscape/patches-5.4/701-net-0325-net-phy-add-10G-fixed-link-support.patch
deleted file mode 100644
index a227baf1f5..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0325-net-phy-add-10G-fixed-link-support.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From c8d3576df41025b341eb767168914990598a0caa Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 22 Aug 2017 18:35:11 +0300
-Subject: [PATCH] net: phy: add 10G fixed-link support
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/phy/swphy.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/phy/swphy.c
-+++ b/drivers/net/phy/swphy.c
-@@ -71,6 +71,7 @@ static const struct swmii_regs duplex[]
- static int swphy_decode_speed(int speed)
- {
- 	switch (speed) {
-+	case 10000:
- 	case 1000:
- 		return SWMII_SPEED_1000;
- 	case 100:
diff --git a/target/linux/layerscape/patches-5.4/701-net-0326-phy-Add-2.5G-SGMII-interface-mode.patch b/target/linux/layerscape/patches-5.4/701-net-0326-phy-Add-2.5G-SGMII-interface-mode.patch
deleted file mode 100644
index a0c72916d5..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0326-phy-Add-2.5G-SGMII-interface-mode.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 457577118b28909a35f62bffc16bb52f73900b53 Mon Sep 17 00:00:00 2001
-From: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-Date: Wed, 29 Nov 2017 15:27:57 +0530
-Subject: [PATCH] phy: Add 2.5G SGMII interface mode
-
-Add 2.5G SGMII interface mode(PHY_INTERFACE_MODE_2500SGMII)
-in existing phy_interface list
-
-Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
----
- include/linux/phy.h | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -102,6 +102,7 @@ typedef enum {
- 	/* 10GBASE-KR, XFI, SFI - single lane 10G Serdes */
- 	PHY_INTERFACE_MODE_10GKR,
- 	PHY_INTERFACE_MODE_USXGMII,
-+	PHY_INTERFACE_MODE_2500SGMII,
- 	PHY_INTERFACE_MODE_MAX,
- } phy_interface_t;
- 
-@@ -179,6 +180,8 @@ static inline const char *phy_modes(phy_
- 		return "10gbase-kr";
- 	case PHY_INTERFACE_MODE_USXGMII:
- 		return "usxgmii";
-+	case PHY_INTERFACE_MODE_2500SGMII:
-+		return "sgmii-2500";
- 	default:
- 		return "unknown";
- 	}
diff --git a/target/linux/layerscape/patches-5.4/701-net-0327-at803x-Address-packet-drops-at-low-traffic-rate-due-.patch b/target/linux/layerscape/patches-5.4/701-net-0327-at803x-Address-packet-drops-at-low-traffic-rate-due-.patch
deleted file mode 100644
index babecdecb7..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0327-at803x-Address-packet-drops-at-low-traffic-rate-due-.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 53c3bd0d5a873c23841bb95e7b95c1c3630c50bd Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Thu, 12 Jul 2018 13:03:13 +0300
-Subject: [PATCH] at803x: Address packet drops at low traffic rate due to
- SmartEEE feature
-
-* According to the AR8035 datasheet, smartEEE mode (active by default)
-  makes the PHY enters sleep after a configurable idle time. It does
-  this autonomously, without LPI (Low Power Idle) signals coming from MAC.
-* Tested with ping (default of 1 second interval) over back-to-back
-  RGMII between 2 boards having AR8035 at both ends:
-    - Without patch:
-  225 packets transmitted, 145 received, 35% packet loss, time 229334ms
-    - With patch:
-  144 packets transmitted, 144 received, 0% packet loss, time 146378ms
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- drivers/net/phy/Kconfig  | 10 ++++++++++
- drivers/net/phy/at803x.c | 22 ++++++++++++++++++++++
- 2 files changed, 32 insertions(+)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -363,6 +363,16 @@ config AT803X_PHY
- 	---help---
- 	  Currently supports the AT8030 and AT8035 model
- 
-+config AT803X_PHY_SMART_EEE
-+	depends on AT803X_PHY
-+	default n
-+	tristate "SmartEEE feature for AT803X PHYs"
-+	---help---
-+	  Enables the Atheros SmartEEE feature (not IEEE 802.3az). When 2 PHYs
-+	  which support this feature are connected back-to-back, they may
-+	  negotiate a low-power sleep mode autonomously, without the Ethernet
-+	  controller's knowledge.  May cause packet loss.
-+
- config BCM63XX_PHY
- 	tristate "Broadcom 63xx SOCs internal PHY"
- 	depends on BCM63XX || COMPILE_TEST
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -62,6 +62,8 @@
- #define AT803X_DEBUG_REG_5			0x05
- #define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
- 
-+#define AT803X_LPI_EN				BIT(8)
-+
- #define ATH8030_PHY_ID 0x004dd076
- #define ATH8031_PHY_ID 0x004dd074
- #define ATH8032_PHY_ID 0x004dd023
-@@ -299,10 +301,30 @@ static int at803x_probe(struct phy_devic
- 	return ret;
- }
- 
-+static void at803x_enable_smart_eee(struct phy_device *phydev, int on)
-+{
-+	int value;
-+
-+	/* 5.1.11 Smart_eee control3 */
-+	value = phy_read_mmd(phydev, MDIO_MMD_PCS, 0x805D);
-+	if (on)
-+		value |= AT803X_LPI_EN;
-+	else
-+		value &= ~AT803X_LPI_EN;
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x805D, value);
-+}
-+
- static int at803x_config_init(struct phy_device *phydev)
- {
- 	int ret;
- 
-+
-+#ifdef CONFIG_AT803X_PHY_SMART_EEE
-+	at803x_enable_smart_eee(phydev, 1);
-+#else
-+	at803x_enable_smart_eee(phydev, 0);
-+#endif
-+
- 	/* The RX and TX delay default is:
- 	 *   after HW reset: RX delay enabled and TX delay disabled
- 	 *   after SW reset: RX delay enabled, while TX delay retains the
diff --git a/target/linux/layerscape/patches-5.4/701-net-0328-net-phy-Inphi-IN112525_s03-retimer-support.patch b/target/linux/layerscape/patches-5.4/701-net-0328-net-phy-Inphi-IN112525_s03-retimer-support.patch
deleted file mode 100644
index dcb6071e28..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0328-net-phy-Inphi-IN112525_s03-retimer-support.patch
+++ /dev/null
@@ -1,620 +0,0 @@
-From 630ee8f358d961a7c8295d60a112e27cbfe4478d Mon Sep 17 00:00:00 2001
-From: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
-Date: Fri, 9 Nov 2018 06:20:36 +0200
-Subject: [PATCH] net/phy: Inphi IN112525_s03 retimer support
-
-Software controller for IN112525_s03 retimer
-
-Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
----
- drivers/net/phy/Kconfig  |   5 +
- drivers/net/phy/Makefile |   1 +
- drivers/net/phy/inphi.c  | 578 +++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 584 insertions(+)
- create mode 100644 drivers/net/phy/inphi.c
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -471,6 +471,11 @@ config ICPLUS_PHY
- 	---help---
- 	  Currently supports the IP175C and IP1001 PHYs.
- 
-+config INPHI_PHY
-+	tristate "Inphi CDR 10G/25G Ethernet PHY"
-+	---help---
-+	  Currently supports the IN112525_S03 part @ 25G
-+
- config INTEL_XWAY_PHY
- 	tristate "Intel XWAY PHYs"
- 	---help---
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -86,6 +86,7 @@ obj-$(CONFIG_DP83848_PHY)	+= dp83848.o
- obj-$(CONFIG_DP83867_PHY)	+= dp83867.o
- obj-$(CONFIG_FIXED_PHY)		+= fixed_phy.o
- obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
-+obj-$(CONFIG_INPHI_PHY)	+= inphi.o
- obj-$(CONFIG_INTEL_XWAY_PHY)	+= intel-xway.o
- obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
- obj-$(CONFIG_LXT_PHY)		+= lxt.o
---- /dev/null
-+++ b/drivers/net/phy/inphi.c
-@@ -0,0 +1,578 @@
-+/*
-+ * Copyright 2018 NXP
-+ * Copyright 2018 INPHI
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * 1. Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the following disclaimer.
-+ * 2. Redistributions in binary form must reproduce the above copyright notice,
-+ * this list of conditions and the following disclaimer in the documentation
-+ * and/or other materials provided with the distribution.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
-+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-+ * POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * Inphi is a registered trademark of Inphi Corporation
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/phy.h>
-+#include <linux/mdio.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_irq.h>
-+#include <linux/workqueue.h>
-+#include <linux/i2c.h>
-+#include <linux/timer.h>
-+#include <linux/delay.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/fs.h>
-+#include <linux/cdev.h>
-+#include <linux/device.h>
-+#include <linux/slab.h>
-+#include <linux/uaccess.h>
-+
-+#define PHY_ID_IN112525  0x02107440
-+
-+#define INPHI_S03_DEVICE_ID_MSB 0x2
-+#define INPHI_S03_DEVICE_ID_LSB 0x3
-+
-+#define ALL_LANES		4
-+#define INPHI_POLL_DELAY	2500
-+
-+#define PHYCTRL_REG1	0x0012
-+#define PHYCTRL_REG2	0x0014
-+#define PHYCTRL_REG3	0x0120
-+#define PHYCTRL_REG4	0x0121
-+#define PHYCTRL_REG5	0x0180
-+#define PHYCTRL_REG6	0x0580
-+#define PHYCTRL_REG7	0x05C4
-+#define PHYCTRL_REG8	0x01C8
-+#define PHYCTRL_REG9	0x0521
-+
-+#define PHYSTAT_REG1	0x0021
-+#define PHYSTAT_REG2	0x0022
-+#define PHYSTAT_REG3	0x0123
-+
-+#define PHYMISC_REG1	0x0025
-+#define PHYMISC_REG2	0x002c
-+#define PHYMISC_REG3	0x00b3
-+#define PHYMISC_REG4	0x0181
-+#define PHYMISC_REG5	0x019D
-+#define PHYMISC_REG6	0x0198
-+#define PHYMISC_REG7	0x0199
-+#define PHYMISC_REG8	0x0581
-+#define PHYMISC_REG9	0x0598
-+#define PHYMISC_REG10	0x059c
-+#define PHYMISC_REG20	0x01B0
-+#define PHYMISC_REG21	0x01BC
-+#define PHYMISC_REG22	0x01C0
-+
-+#define RX_VCO_CODE_OFFSET	5
-+
-+#define mdio_wr(a, b)	phy_write_mmd(inphi_phydev, MDIO_MMD_VEND1, (a), (b))
-+#define mdio_rd(a)	phy_read_mmd(inphi_phydev, MDIO_MMD_VEND1, (a))
-+
-+#define VCO_CODE  390
-+
-+int vco_codes[ALL_LANES] = {
-+	VCO_CODE,
-+	VCO_CODE,
-+	VCO_CODE,
-+	VCO_CODE
-+};
-+
-+static void mykmod_work_handler(struct work_struct *w);
-+
-+static struct workqueue_struct *wq;
-+static DECLARE_DELAYED_WORK(mykmod_work, mykmod_work_handler);
-+static unsigned long onesec;
-+struct phy_device *inphi_phydev;
-+
-+int bit_test(int value, int bit_field)
-+{
-+	int result;
-+	int bit_mask = (1 << bit_field);
-+
-+	result = ((value & bit_mask) == bit_mask);
-+	return result;
-+}
-+
-+int tx_pll_lock_test(int lane)
-+{
-+	int i, val, locked = 1;
-+
-+	if (lane == ALL_LANES) {
-+		for (i = 0; i < ALL_LANES; i++) {
-+			val = mdio_rd(i * 0x100 + PHYSTAT_REG3);
-+			locked = locked & bit_test(val, 15);
-+		}
-+	} else {
-+		val = mdio_rd(lane * 0x100 + PHYSTAT_REG3);
-+		locked = locked & bit_test(val, 15);
-+	}
-+
-+	return locked;
-+}
-+
-+void rx_reset_assert(int lane)
-+{
-+	int mask, val;
-+
-+	if (lane == ALL_LANES) {
-+		val = mdio_rd(PHYMISC_REG2);
-+		mask = (1 << 15);
-+		mdio_wr(PHYMISC_REG2, val + mask);
-+	} else {
-+		val = mdio_rd(lane * 0x100 + PHYCTRL_REG8);
-+		mask = (1 << 6);
-+		mdio_wr(lane * 0x100 + PHYCTRL_REG8, val + mask);
-+	}
-+}
-+
-+void rx_reset_de_assert(int lane)
-+{
-+	int mask, val;
-+
-+	if (lane == ALL_LANES) {
-+		val = mdio_rd(PHYMISC_REG2);
-+		mask = 0xffff - (1 << 15);
-+		mdio_wr(PHYMISC_REG2, val & mask);
-+	} else {
-+		val = mdio_rd(lane * 0x100 + PHYCTRL_REG8);
-+		mask = 0xffff - (1 << 6);
-+		mdio_wr(lane * 0x100 + PHYCTRL_REG8, val & mask);
-+	}
-+}
-+
-+void rx_powerdown_assert(int lane)
-+{
-+	int mask, val;
-+
-+	val = mdio_rd(lane * 0x100 + PHYCTRL_REG8);
-+	mask = (1 << 5);
-+	mdio_wr(lane * 0x100 + PHYCTRL_REG8, val + mask);
-+}
-+
-+void rx_powerdown_de_assert(int lane)
-+{
-+	int mask, val;
-+
-+	val = mdio_rd(lane * 0x100 + PHYCTRL_REG8);
-+	mask = 0xffff - (1 << 5);
-+	mdio_wr(lane * 0x100 + PHYCTRL_REG8, val & mask);
-+}
-+
-+void tx_pll_assert(int lane)
-+{
-+	int val, recal;
-+
-+	if (lane == ALL_LANES) {
-+		val = mdio_rd(PHYMISC_REG2);
-+		recal = (1 << 12);
-+		mdio_wr(PHYMISC_REG2, val | recal);
-+	} else {
-+		val = mdio_rd(lane * 0x100 + PHYCTRL_REG4);
-+		recal = (1 << 15);
-+		mdio_wr(lane * 0x100 + PHYCTRL_REG4, val | recal);
-+	}
-+}
-+
-+void tx_pll_de_assert(int lane)
-+{
-+	int recal, val;
-+
-+	if (lane == ALL_LANES) {
-+		val = mdio_rd(PHYMISC_REG2);
-+		recal = 0xefff;
-+		mdio_wr(PHYMISC_REG2, val & recal);
-+	} else {
-+		val = mdio_rd(lane * 0x100 + PHYCTRL_REG4);
-+		recal = 0x7fff;
-+		mdio_wr(lane * 0x100 + PHYCTRL_REG4, val & recal);
-+	}
-+}
-+
-+void tx_core_assert(int lane)
-+{
-+	int recal, val, val2, core_reset;
-+
-+	if (lane == 4) {
-+		val = mdio_rd(PHYMISC_REG2);
-+		recal = 1 << 10;
-+		mdio_wr(PHYMISC_REG2, val | recal);
-+	} else {
-+		val2 = mdio_rd(PHYMISC_REG3);
-+		core_reset = (1 << (lane + 8));
-+		mdio_wr(PHYMISC_REG3, val2 | core_reset);
-+	}
-+}
-+
-+void lol_disable(int lane)
-+{
-+	int val, mask;
-+
-+	val = mdio_rd(PHYMISC_REG3);
-+	mask = 1 << (lane + 4);
-+	mdio_wr(PHYMISC_REG3, val | mask);
-+}
-+
-+void tx_core_de_assert(int lane)
-+{
-+	int val, recal, val2, core_reset;
-+
-+	if (lane == ALL_LANES) {
-+		val = mdio_rd(PHYMISC_REG2);
-+		recal = 0xffff - (1 << 10);
-+		mdio_wr(PHYMISC_REG2, val & recal);
-+	} else {
-+		val2 = mdio_rd(PHYMISC_REG3);
-+		core_reset = 0xffff - (1 << (lane + 8));
-+		mdio_wr(PHYMISC_REG3, val2 & core_reset);
-+	}
-+}
-+
-+void tx_restart(int lane)
-+{
-+	tx_core_assert(lane);
-+	tx_pll_assert(lane);
-+	tx_pll_de_assert(lane);
-+	usleep_range(1500, 1600);
-+	tx_core_de_assert(lane);
-+}
-+
-+void disable_lane(int lane)
-+{
-+	rx_reset_assert(lane);
-+	rx_powerdown_assert(lane);
-+	tx_core_assert(lane);
-+	lol_disable(lane);
-+}
-+
-+void toggle_reset(int lane)
-+{
-+	int reg, val, orig;
-+
-+	if (lane == ALL_LANES) {
-+		mdio_wr(PHYMISC_REG2, 0x8000);
-+		udelay(100);
-+		mdio_wr(PHYMISC_REG2, 0x0000);
-+	} else {
-+		reg = lane * 0x100 + PHYCTRL_REG8;
-+		val = (1 << 6);
-+		orig = mdio_rd(reg);
-+		mdio_wr(reg, orig + val);
-+		udelay(100);
-+		mdio_wr(reg, orig);
-+	}
-+}
-+
-+int az_complete_test(int lane)
-+{
-+	int success = 1, value;
-+
-+	if (lane == 0 || lane == ALL_LANES) {
-+		value = mdio_rd(PHYCTRL_REG5);
-+		success = success & bit_test(value, 2);
-+	}
-+	if (lane == 1 || lane == ALL_LANES) {
-+		value = mdio_rd(PHYCTRL_REG5 + 0x100);
-+		success = success & bit_test(value, 2);
-+	}
-+	if (lane == 2 || lane == ALL_LANES) {
-+		value = mdio_rd(PHYCTRL_REG5 + 0x200);
-+		success = success & bit_test(value, 2);
-+	}
-+	if (lane == 3 || lane == ALL_LANES) {
-+		value = mdio_rd(PHYCTRL_REG5 + 0x300);
-+		success = success & bit_test(value, 2);
-+	}
-+
-+	return success;
-+}
-+
-+void save_az_offsets(int lane)
-+{
-+	int i;
-+
-+#define AZ_OFFSET_LANE_UPDATE(reg, lane) \
-+	mdio_wr((reg) + (lane) * 0x100,  \
-+		(mdio_rd((reg) + (lane) * 0x100) >> 8))
-+
-+	if (lane == ALL_LANES) {
-+		for (i = 0; i < ALL_LANES; i++) {
-+			AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20, i);
-+			AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 1, i);
-+			AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 2, i);
-+			AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 3, i);
-+			AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21, i);
-+			AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 1, i);
-+			AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 2, i);
-+			AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 3, i);
-+			AZ_OFFSET_LANE_UPDATE(PHYMISC_REG22, i);
-+		}
-+	} else {
-+		AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20, lane);
-+		AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 1, lane);
-+		AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 2, lane);
-+		AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 3, lane);
-+		AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21, lane);
-+		AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 1, lane);
-+		AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 2, lane);
-+		AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 3, lane);
-+		AZ_OFFSET_LANE_UPDATE(PHYMISC_REG22, lane);
-+	}
-+
-+	mdio_wr(PHYCTRL_REG7, 0x0001);
-+}
-+
-+void save_vco_codes(int lane)
-+{
-+	int i;
-+
-+	if (lane == ALL_LANES) {
-+		for (i = 0; i < ALL_LANES; i++) {
-+			vco_codes[i] = mdio_rd(PHYMISC_REG5 + i * 0x100);
-+			mdio_wr(PHYMISC_REG5 + i * 0x100,
-+				vco_codes[i] + RX_VCO_CODE_OFFSET);
-+		}
-+	} else {
-+		vco_codes[lane] = mdio_rd(PHYMISC_REG5 + lane * 0x100);
-+		mdio_wr(PHYMISC_REG5 + lane * 0x100,
-+			vco_codes[lane] + RX_VCO_CODE_OFFSET);
-+	}
-+}
-+
-+int inphi_lane_recovery(int lane)
-+{
-+	int i, value, az_pass;
-+
-+	switch (lane) {
-+	case 0:
-+	case 1:
-+	case 2:
-+	case 3:
-+		rx_reset_assert(lane);
-+		mdelay(20);
-+		break;
-+	case ALL_LANES:
-+		mdio_wr(PHYMISC_REG2, 0x9C00);
-+		mdelay(20);
-+		do {
-+			value = mdio_rd(PHYMISC_REG2);
-+			udelay(10);
-+		} while (!bit_test(value, 4));
-+		break;
-+	default:
-+		dev_err(&inphi_phydev->mdio.dev,
-+			"Incorrect usage of APIs in %s driver\n",
-+			inphi_phydev->drv->name);
-+		break;
-+	}
-+
-+	if (lane == ALL_LANES) {
-+		for (i = 0; i < ALL_LANES; i++)
-+			mdio_wr(PHYMISC_REG7 + i * 0x100, VCO_CODE);
-+	} else {
-+		mdio_wr(PHYMISC_REG7 + lane * 0x100, VCO_CODE);
-+	}
-+
-+	if (lane == ALL_LANES)
-+		for (i = 0; i < ALL_LANES; i++)
-+			mdio_wr(PHYCTRL_REG5 + i * 0x100, 0x0418);
-+	else
-+		mdio_wr(PHYCTRL_REG5 + lane * 0x100, 0x0418);
-+
-+	mdio_wr(PHYCTRL_REG7,   0x0000);
-+
-+	rx_reset_de_assert(lane);
-+
-+	if (lane == ALL_LANES) {
-+		for (i = 0; i < ALL_LANES; i++) {
-+			mdio_wr(PHYCTRL_REG5 + i * 0x100, 0x0410);
-+			mdio_wr(PHYCTRL_REG5 + i * 0x100, 0x0412);
-+		}
-+	} else {
-+		mdio_wr(PHYCTRL_REG5 + lane * 0x100, 0x0410);
-+		mdio_wr(PHYCTRL_REG5 + lane * 0x100, 0x0412);
-+	}
-+
-+	for (i = 0; i < 64; i++) {
-+		mdelay(100);
-+		az_pass = az_complete_test(lane);
-+		if (az_pass) {
-+			save_az_offsets(lane);
-+			break;
-+		}
-+	}
-+
-+	if (!az_pass) {
-+		pr_info("in112525: AZ calibration fail @ lane=%d\n", lane);
-+		return -1;
-+	}
-+
-+	if (lane == ALL_LANES) {
-+		mdio_wr(PHYMISC_REG8, 0x0002);
-+		mdio_wr(PHYMISC_REG9, 0x2028);
-+		mdio_wr(PHYCTRL_REG6, 0x0010);
-+		usleep_range(1000, 1200);
-+		mdio_wr(PHYCTRL_REG6, 0x0110);
-+		mdelay(30);
-+		mdio_wr(PHYMISC_REG9, 0x3020);
-+	} else {
-+		mdio_wr(PHYMISC_REG4 + lane * 0x100, 0x0002);
-+		mdio_wr(PHYMISC_REG6 + lane * 0x100, 0x2028);
-+		mdio_wr(PHYCTRL_REG5 + lane * 0x100, 0x0010);
-+		usleep_range(1000, 1200);
-+		mdio_wr(PHYCTRL_REG5 + lane * 0x100, 0x0110);
-+		mdelay(30);
-+		mdio_wr(PHYMISC_REG6 + lane * 0x100, 0x3020);
-+	}
-+
-+	if (lane == ALL_LANES) {
-+		mdio_wr(PHYMISC_REG2, 0x1C00);
-+		mdio_wr(PHYMISC_REG2, 0x0C00);
-+	} else {
-+		tx_restart(lane);
-+		mdelay(11);
-+	}
-+
-+	if (lane == ALL_LANES) {
-+		if (bit_test(mdio_rd(PHYMISC_REG2), 6) == 0)
-+			return -1;
-+	} else {
-+		if (tx_pll_lock_test(lane) == 0)
-+			return -1;
-+	}
-+
-+	save_vco_codes(lane);
-+
-+	if (lane == ALL_LANES) {
-+		mdio_wr(PHYMISC_REG2, 0x0400);
-+		mdio_wr(PHYMISC_REG2, 0x0000);
-+		value = mdio_rd(PHYCTRL_REG1);
-+		value = value & 0xffbf;
-+		mdio_wr(PHYCTRL_REG2, value);
-+	} else {
-+		tx_core_de_assert(lane);
-+	}
-+
-+	if (lane == ALL_LANES) {
-+		mdio_wr(PHYMISC_REG1, 0x8000);
-+		mdio_wr(PHYMISC_REG1, 0x0000);
-+	}
-+	mdio_rd(PHYMISC_REG1);
-+	mdio_rd(PHYMISC_REG1);
-+	usleep_range(1000, 1200);
-+	mdio_rd(PHYSTAT_REG1);
-+	mdio_rd(PHYSTAT_REG2);
-+
-+	return 0;
-+}
-+
-+static void mykmod_work_handler(struct work_struct *w)
-+{
-+	int all_lanes_lock, lane0_lock, lane1_lock, lane2_lock, lane3_lock;
-+
-+	lane0_lock = bit_test(mdio_rd(0x123), 15);
-+	lane1_lock = bit_test(mdio_rd(0x223), 15);
-+	lane2_lock = bit_test(mdio_rd(0x323), 15);
-+	lane3_lock = bit_test(mdio_rd(0x423), 15);
-+
-+	/* check if the chip had any successful lane lock from the previous
-+	 * stage (e.g. u-boot)
-+	 */
-+	all_lanes_lock = lane0_lock | lane1_lock | lane2_lock | lane3_lock;
-+
-+	if (!all_lanes_lock) {
-+		/* start fresh */
-+		inphi_lane_recovery(ALL_LANES);
-+	} else {
-+		if (!lane0_lock)
-+			inphi_lane_recovery(0);
-+		if (!lane1_lock)
-+			inphi_lane_recovery(1);
-+		if (!lane2_lock)
-+			inphi_lane_recovery(2);
-+		if (!lane3_lock)
-+			inphi_lane_recovery(3);
-+	}
-+
-+	queue_delayed_work(wq, &mykmod_work, onesec);
-+}
-+
-+int inphi_probe(struct phy_device *phydev)
-+{
-+	int phy_id = 0, id_lsb = 0, id_msb = 0;
-+
-+	/* Read device id from phy registers */
-+	id_lsb = phy_read_mmd(phydev, MDIO_MMD_VEND1, INPHI_S03_DEVICE_ID_MSB);
-+	if (id_lsb < 0)
-+		return -ENXIO;
-+
-+	phy_id = id_lsb << 16;
-+
-+	id_msb = phy_read_mmd(phydev, MDIO_MMD_VEND1, INPHI_S03_DEVICE_ID_LSB);
-+	if (id_msb < 0)
-+		return -ENXIO;
-+
-+	phy_id |= id_msb;
-+
-+	/* Make sure the device tree binding matched the driver with the
-+	 * right device.
-+	 */
-+	if (phy_id != phydev->drv->phy_id) {
-+		dev_err(&phydev->mdio.dev,
-+			"Error matching phy with %s driver\n",
-+			phydev->drv->name);
-+		return -ENODEV;
-+	}
-+
-+	/* update the local phydev pointer, used inside all APIs */
-+	inphi_phydev = phydev;
-+	onesec = msecs_to_jiffies(INPHI_POLL_DELAY);
-+
-+	wq = create_singlethread_workqueue("inphi_kmod");
-+	if (wq) {
-+		queue_delayed_work(wq, &mykmod_work, onesec);
-+	} else {
-+		dev_err(&phydev->mdio.dev,
-+			"Error creating kernel workqueue for %s driver\n",
-+			phydev->drv->name);
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
-+
-+static struct phy_driver inphi_driver[] = {
-+{
-+	.phy_id		= PHY_ID_IN112525,
-+	.phy_id_mask	= 0x0ff0fff0,
-+	.name		= "Inphi 112525_S03",
-+	.features	= PHY_GBIT_FEATURES,
-+	.probe		= &inphi_probe,
-+},
-+};
-+
-+module_phy_driver(inphi_driver);
-+
-+static struct mdio_device_id __maybe_unused inphi_tbl[] = {
-+	{ PHY_ID_IN112525, 0x0ff0fff0},
-+	{},
-+};
-+
-+MODULE_DEVICE_TABLE(mdio, inphi_tbl);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0329-net-phy-Inphi-IN112525_s03-retimer-updates.patch b/target/linux/layerscape/patches-5.4/701-net-0329-net-phy-Inphi-IN112525_s03-retimer-updates.patch
deleted file mode 100644
index 2f38fd0736..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0329-net-phy-Inphi-IN112525_s03-retimer-updates.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From a1b049babfd0ae224179dc82ec69cb9bbf585699 Mon Sep 17 00:00:00 2001
-From: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
-Date: Sun, 16 Dec 2018 22:35:44 +0200
-Subject: [PATCH] net/phy: Inphi IN112525_s03 retimer updates
-
-The retimer doesn't get probed in linux due to the fact that it's a
-non-standard clause-45 device. Hardcoding the phyid in device-tree
-and adding custom routines for registry read/write operations
-solves the issue.
-
-Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
----
- drivers/net/phy/inphi.c | 30 +++++++++++++++++++++++-------
- 1 file changed, 23 insertions(+), 7 deletions(-)
-
---- a/drivers/net/phy/inphi.c
-+++ b/drivers/net/phy/inphi.c
-@@ -82,11 +82,7 @@
- #define PHYMISC_REG22	0x01C0
- 
- #define RX_VCO_CODE_OFFSET	5
--
--#define mdio_wr(a, b)	phy_write_mmd(inphi_phydev, MDIO_MMD_VEND1, (a), (b))
--#define mdio_rd(a)	phy_read_mmd(inphi_phydev, MDIO_MMD_VEND1, (a))
--
--#define VCO_CODE  390
-+#define VCO_CODE		390
- 
- int vco_codes[ALL_LANES] = {
- 	VCO_CODE,
-@@ -102,6 +98,23 @@ static DECLARE_DELAYED_WORK(mykmod_work,
- static unsigned long onesec;
- struct phy_device *inphi_phydev;
- 
-+static int mdio_wr(u32 regnum, u16 val)
-+{
-+	regnum = MII_ADDR_C45 | (MDIO_MMD_VEND1 << 16) | (regnum & 0xffff);
-+
-+	return mdiobus_write(inphi_phydev->mdio.bus, inphi_phydev->mdio.addr,
-+				regnum, val);
-+}
-+
-+static int mdio_rd(u32 regnum)
-+{
-+	regnum = MII_ADDR_C45 | (MDIO_MMD_VEND1 << 16) | (regnum & 0xffff);
-+
-+	return mdiobus_read(inphi_phydev->mdio.bus, inphi_phydev->mdio.addr,
-+				regnum);
-+}
-+
-+
- int bit_test(int value, int bit_field)
- {
- 	int result;
-@@ -518,14 +531,17 @@ int inphi_probe(struct phy_device *phyde
- {
- 	int phy_id = 0, id_lsb = 0, id_msb = 0;
- 
-+	/* setup the inphi_phydev ptr for mdio_rd/mdio_wr APIs */
-+	inphi_phydev = phydev;
-+
- 	/* Read device id from phy registers */
--	id_lsb = phy_read_mmd(phydev, MDIO_MMD_VEND1, INPHI_S03_DEVICE_ID_MSB);
-+	id_lsb = mdio_rd(INPHI_S03_DEVICE_ID_MSB);
- 	if (id_lsb < 0)
- 		return -ENXIO;
- 
- 	phy_id = id_lsb << 16;
- 
--	id_msb = phy_read_mmd(phydev, MDIO_MMD_VEND1, INPHI_S03_DEVICE_ID_LSB);
-+	id_msb = mdio_rd(INPHI_S03_DEVICE_ID_LSB);
- 	if (id_msb < 0)
- 		return -ENXIO;
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0330-net-phy-at803x-add-vddio-1v8-and-eee-disable-support.patch b/target/linux/layerscape/patches-5.4/701-net-0330-net-phy-at803x-add-vddio-1v8-and-eee-disable-support.patch
deleted file mode 100644
index 7ae1ba3333..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0330-net-phy-at803x-add-vddio-1v8-and-eee-disable-support.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From e54e051c0adbe86116ab81c09a208f3a62c84f92 Mon Sep 17 00:00:00 2001
-From: Fugang Duan <fugang.duan@nxp.com>
-Date: Wed, 5 Jun 2019 18:38:51 +0800
-Subject: [PATCH] net: phy: at803x: add vddio-1v8 and eee disable support
-
-Add new property "at803x,vddio-1p8v" and "at803x,eee-disabled"
-support.
-
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
-[ Aisheng: fix small merge conflict ]
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/phy/at803x.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 64 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -44,8 +44,13 @@
- #define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
- #define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
- #define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
-+#define AT803X_SMARTEEE_CTL3_OFFSET		0x805D
-+#define AT803X_MMD_ACCESS_CONTROL		0x0D
-+#define AT803X_MMD_ACCESS_CONTROL_DATA		0x0E
-+#define AT803X_FUNC_DATA			0x4003
- #define AT803X_REG_CHIP_CONFIG			0x1f
- #define AT803X_BT_BX_REG_SEL			0x8000
-+#define AT803X_SMARTEEE_DISABLED_VAL		0x1000
- 
- #define AT803X_DEBUG_ADDR			0x1D
- #define AT803X_DEBUG_DATA			0x1E
-@@ -64,6 +69,9 @@
- 
- #define AT803X_LPI_EN				BIT(8)
- 
-+#define AT803X_DEBUG_REG_31			0x1f
-+#define AT803X_VDDIO_1P8V_EN			0x8
-+
- #define ATH8030_PHY_ID 0x004dd076
- #define ATH8031_PHY_ID 0x004dd074
- #define ATH8032_PHY_ID 0x004dd023
-@@ -74,12 +82,16 @@
- #define AT803X_PAGE_FIBER		0
- #define AT803X_PAGE_COPPER		1
- 
-+#define AT803X_EEE_FEATURE_DISABLE		(1 << 1)
-+#define AT803X_VDDIO_1P8V			(1 << 2)
-+
- MODULE_DESCRIPTION("Atheros 803x PHY driver");
- MODULE_AUTHOR("Matus Ujhelyi");
- MODULE_LICENSE("GPL");
- 
- struct at803x_priv {
- 	bool phy_reset:1;
-+	u32 quirks;
- };
- 
- struct at803x_context {
-@@ -172,6 +184,39 @@ static int at803x_disable_tx_delay(struc
- 				     AT803X_DEBUG_TX_CLK_DLY_EN, 0);
- }
- 
-+static inline int at803x_set_vddio_1p8v(struct phy_device *phydev)
-+{
-+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_31, 0,
-+					AT803X_VDDIO_1P8V_EN);
-+}
-+
-+static int at803x_disable_eee(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
-+				  AT803X_DEVICE_ADDR);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
-+				  AT803X_SMARTEEE_CTL3_OFFSET);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
-+				  AT803X_FUNC_DATA);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
-+				  AT803X_SMARTEEE_DISABLED_VAL);
-+	if (ret < 0)
-+		return ret;
-+
-+	return 0;
-+}
-+
- /* save relevant PHY registers to private copy */
- static void at803x_context_save(struct phy_device *phydev,
- 				struct at803x_context *context)
-@@ -286,6 +331,12 @@ static int at803x_probe(struct phy_devic
- 	if (!priv)
- 		return -ENOMEM;
- 
-+	if (of_property_read_bool(dev->of_node, "at803x,eee-disabled"))
-+		priv->quirks |= AT803X_EEE_FEATURE_DISABLE;
-+
-+	if (of_property_read_bool(dev->of_node, "at803x,vddio-1p8v"))
-+		priv->quirks |= AT803X_VDDIO_1P8V;
-+
- 	phydev->priv = priv;
- 
- 	/* Some bootloaders leave the fiber page selected.
-@@ -316,6 +367,7 @@ static void at803x_enable_smart_eee(stru
- 
- static int at803x_config_init(struct phy_device *phydev)
- {
-+	struct at803x_priv *priv = phydev->priv;
- 	int ret;
- 
- 
-@@ -344,6 +396,18 @@ static int at803x_config_init(struct phy
- 	else
- 		ret = at803x_disable_tx_delay(phydev);
- 
-+	if (priv->quirks & AT803X_VDDIO_1P8V) {
-+		ret = at803x_set_vddio_1p8v(phydev);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
-+	if (priv->quirks & AT803X_EEE_FEATURE_DISABLE) {
-+		ret = at803x_disable_eee(phydev);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
- 	return ret;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0331-drivers-net-phy-aquantia-enable-AQR112-and-AQR412.patch b/target/linux/layerscape/patches-5.4/701-net-0331-drivers-net-phy-aquantia-enable-AQR112-and-AQR412.patch
deleted file mode 100644
index 9140382e5c..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0331-drivers-net-phy-aquantia-enable-AQR112-and-AQR412.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From 5f62951fba63a9f9cfff564209426bdea5fcc371 Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Tue, 27 Aug 2019 15:16:56 +0300
-Subject: [PATCH] drivers: net: phy: aquantia: enable AQR112 and AQR412
-
-Adds support for AQR112 and AQR412 which is mostly based on existing code
-with the addition of code configuring the protocol on system side.
-This allows changing the system side protocol without having to deploy a
-different firmware on the PHY.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/phy/aquantia_main.c | 88 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 88 insertions(+)
-
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
-@@ -22,6 +22,8 @@
- #define PHY_ID_AQR107	0x03a1b4e0
- #define PHY_ID_AQCS109	0x03a1b5c2
- #define PHY_ID_AQR405	0x03a1b4b0
-+#define PHY_ID_AQR112	0x03a1b662
-+#define PHY_ID_AQR412	0x03a1b712
- 
- #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
- #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
-@@ -121,6 +123,29 @@
- #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
- #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
- 
-+/* registers in MDIO_MMD_VEND1 region */
-+#define AQUANTIA_VND1_GLOBAL_SC			0x000
-+#define  AQUANTIA_VND1_GLOBAL_SC_LP		BIT(0xb)
-+
-+/* global start rate, the protocol associated with this speed is used by default
-+ * on SI.
-+ */
-+#define AQUANTIA_VND1_GSTART_RATE		0x31a
-+#define  AQUANTIA_VND1_GSTART_RATE_OFF		0
-+#define  AQUANTIA_VND1_GSTART_RATE_100M		1
-+#define  AQUANTIA_VND1_GSTART_RATE_1G		2
-+#define  AQUANTIA_VND1_GSTART_RATE_10G		3
-+#define  AQUANTIA_VND1_GSTART_RATE_2_5G		4
-+#define  AQUANTIA_VND1_GSTART_RATE_5G		5
-+
-+/* SYSCFG registers for 100M, 1G, 2.5G, 5G, 10G */
-+#define AQUANTIA_VND1_GSYSCFG_BASE		0x31b
-+#define AQUANTIA_VND1_GSYSCFG_100M		0
-+#define AQUANTIA_VND1_GSYSCFG_1G		1
-+#define AQUANTIA_VND1_GSYSCFG_2_5G		2
-+#define AQUANTIA_VND1_GSYSCFG_5G		3
-+#define AQUANTIA_VND1_GSYSCFG_10G		4
-+
- struct aqr107_hw_stat {
- 	const char *name;
- 	int reg;
-@@ -241,6 +266,51 @@ static int aqr_config_aneg(struct phy_de
- 	return genphy_c45_check_and_restart_aneg(phydev, changed);
- }
- 
-+static struct {
-+	u16 syscfg;
-+	int cnt;
-+	u16 start_rate;
-+} aquantia_syscfg[PHY_INTERFACE_MODE_MAX] = {
-+	[PHY_INTERFACE_MODE_SGMII] =      {0x04b, AQUANTIA_VND1_GSYSCFG_1G,
-+					   AQUANTIA_VND1_GSTART_RATE_1G},
-+	[PHY_INTERFACE_MODE_2500BASEX] = {0x144, AQUANTIA_VND1_GSYSCFG_2_5G,
-+					   AQUANTIA_VND1_GSTART_RATE_2_5G},
-+	[PHY_INTERFACE_MODE_XGMII] =      {0x100, AQUANTIA_VND1_GSYSCFG_10G,
-+					   AQUANTIA_VND1_GSTART_RATE_10G},
-+	[PHY_INTERFACE_MODE_USXGMII] =    {0x080, AQUANTIA_VND1_GSYSCFG_10G,
-+					   AQUANTIA_VND1_GSTART_RATE_10G},
-+};
-+
-+/* Sets up protocol on system side before calling aqr_config_aneg */
-+static int aqr_config_aneg_set_prot(struct phy_device *phydev)
-+{
-+	int if_type = phydev->interface;
-+	int i;
-+
-+	if (!aquantia_syscfg[if_type].cnt)
-+		return 0;
-+
-+	/* set PHY in low power mode so we can configure protocols */
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC,
-+		      AQUANTIA_VND1_GLOBAL_SC_LP);
-+	mdelay(10);
-+
-+	/* set the default rate to enable the SI link */
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE,
-+		      aquantia_syscfg[if_type].start_rate);
-+
-+	for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++)
-+		phy_write_mmd(phydev, MDIO_MMD_VEND1,
-+			      AQUANTIA_VND1_GSYSCFG_BASE + i,
-+			      aquantia_syscfg[if_type].syscfg);
-+
-+	/* wake PHY back up */
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0);
-+	mdelay(10);
-+
-+	return aqr_config_aneg(phydev);
-+}
-+
- static int aqr_config_intr(struct phy_device *phydev)
- {
- 	bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
-@@ -682,6 +752,22 @@ static struct phy_driver aqr_driver[] =
- 	.ack_interrupt	= aqr_ack_interrupt,
- 	.read_status	= aqr_read_status,
- },
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
-+	.name		= "Aquantia AQR112",
-+	.config_aneg    = aqr_config_aneg_set_prot,
-+	.config_intr	= aqr_config_intr,
-+	.ack_interrupt	= aqr_ack_interrupt,
-+	.read_status	= aqr_read_status,
-+},
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
-+	.name		= "Aquantia AQR412",
-+	.config_aneg    = aqr_config_aneg_set_prot,
-+	.config_intr	= aqr_config_intr,
-+	.ack_interrupt	= aqr_ack_interrupt,
-+	.read_status	= aqr_read_status,
-+},
- };
- 
- module_phy_driver(aqr_driver);
-@@ -694,6 +780,8 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR412) },
- 	{ }
- };
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0332-drivers-net-phy-aquantia-fix-system-side-protocol-mi.patch b/target/linux/layerscape/patches-5.4/701-net-0332-drivers-net-phy-aquantia-fix-system-side-protocol-mi.patch
deleted file mode 100644
index 2c75ec211f..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0332-drivers-net-phy-aquantia-fix-system-side-protocol-mi.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 5f008cb22f60da4e10375f22266c1a4e20b1252e Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Fri, 20 Sep 2019 18:22:52 +0300
-Subject: [PATCH] drivers: net: phy: aquantia: fix system side protocol
- misconfiguration
-
-Do not set up protocols for speeds that are not supported by FW.  Enabling
-these protocols leads to link issues on system side.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/phy/aquantia_main.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
-@@ -299,10 +299,16 @@ static int aqr_config_aneg_set_prot(stru
- 	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE,
- 		      aquantia_syscfg[if_type].start_rate);
- 
--	for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++)
-+	for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++) {
-+		u16 reg = phy_read_mmd(phydev, MDIO_MMD_VEND1,
-+				       AQUANTIA_VND1_GSYSCFG_BASE + i);
-+		if (!reg)
-+			continue;
-+
- 		phy_write_mmd(phydev, MDIO_MMD_VEND1,
- 			      AQUANTIA_VND1_GSYSCFG_BASE + i,
- 			      aquantia_syscfg[if_type].syscfg);
-+	}
- 
- 	/* wake PHY back up */
- 	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0333-drivers-net-phy-aquantia-enable-USX-AN-for-USXGMII-p.patch b/target/linux/layerscape/patches-5.4/701-net-0333-drivers-net-phy-aquantia-enable-USX-AN-for-USXGMII-p.patch
deleted file mode 100644
index 472dce9f16..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0333-drivers-net-phy-aquantia-enable-USX-AN-for-USXGMII-p.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From ca49d3e4820704bfc3d2b48f59238d26a584602d Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Fri, 20 Sep 2019 19:37:19 +0300
-Subject: [PATCH] drivers: net: phy: aquantia: enable USX AN for USXGMII
- protocol
-
-Depending on FW defaults USX AN in AQR PHY must be explicitly enabled when
-using USXGMII.  Enable it based on interface type.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/phy/aquantia_main.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
-@@ -33,6 +33,9 @@
- #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII	6
- #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII	10
- 
-+#define MDIO_PHYXS_VEND_PROV2			0xC441
-+#define MDIO_PHYXS_VEND_PROV2_USX_AN		BIT(3)
-+
- #define MDIO_AN_VEND_PROV			0xc400
- #define MDIO_AN_VEND_PROV_1000BASET_FULL	BIT(15)
- #define MDIO_AN_VEND_PROV_1000BASET_HALF	BIT(14)
-@@ -310,6 +313,10 @@ static int aqr_config_aneg_set_prot(stru
- 			      aquantia_syscfg[if_type].syscfg);
- 	}
- 
-+	if (if_type == PHY_INTERFACE_MODE_USXGMII)
-+		phy_write_mmd(phydev, MDIO_MMD_PHYXS, MDIO_PHYXS_VEND_PROV2,
-+			      MDIO_PHYXS_VEND_PROV2_USX_AN);
-+
- 	/* wake PHY back up */
- 	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0);
- 	mdelay(10);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0334-net-tsn-netlink-interface-for-APP-layer-to-config-TS.patch b/target/linux/layerscape/patches-5.4/701-net-0334-net-tsn-netlink-interface-for-APP-layer-to-config-TS.patch
deleted file mode 100644
index 33de677930..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0334-net-tsn-netlink-interface-for-APP-layer-to-config-TS.patch
+++ /dev/null
@@ -1,5113 +0,0 @@
-From e478ab518612f1a821968e1bb5b08b01b10085b0 Mon Sep 17 00:00:00 2001
-From: Po Liu <Po.Liu@nxp.com>
-Date: Tue, 15 Oct 2019 16:11:40 +0800
-Subject: [PATCH] net:tsn: netlink interface for APP layer to config TSN
- capability hardware ports
-
-This patch provids netlink method to configure the TSN protocols hardwares.
-TSN guaranteed packet transport with bounded low latency, low packet delay
-variation, and low packet loss by hardware and software methods.
-
-The three basic components of TSN are:
-
-1. Time synchronization: This was implement by 8021AS which base on the
-   IEEE1588 precision Time Protocol. This is configured by the other way
-   in kernel.
-   8021AS not included in this patch.
-
-2. Scheduling and traffic shaping and per-stream filter policing:
-   This patch support Qbv/Qci/Qbu/8021CB/Qav etc.
-
-3. Selection of communication paths:
-   This patch not support the pure software only TSN protocols(like Qcc)
-   but hardware related configuration.
-
-TSN Protocols supports by this patch: Qbv/Qci/Qbu/Credit-base Shaper(Qav).
-This patch verified on NXP ls1028ardb board.
-
-Signed-off-by: Po Liu <Po.Liu@nxp.com>
----
- include/net/tsn.h        |  114 ++
- include/uapi/linux/tsn.h | 1207 +++++++++++++++
- net/Kconfig              |    1 +
- net/Makefile             |    3 +
- net/tsn/Kconfig          |   15 +
- net/tsn/Makefile         |    1 +
- net/tsn/genl_tsn.c       | 3696 ++++++++++++++++++++++++++++++++++++++++++++++
- 7 files changed, 5037 insertions(+)
- create mode 100644 include/net/tsn.h
- create mode 100644 include/uapi/linux/tsn.h
- create mode 100644 net/tsn/Kconfig
- create mode 100644 net/tsn/Makefile
- create mode 100644 net/tsn/genl_tsn.c
-
---- /dev/null
-+++ b/include/net/tsn.h
-@@ -0,0 +1,114 @@
-+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-+/* Copyright 2017-2019 NXP */
-+
-+#ifndef __TSN_H__
-+#define __TSN_H__
-+
-+#include <linux/notifier.h>
-+#include <uapi/linux/tsn.h>
-+
-+enum tsn_notifier_type {
-+	TSN_QBV_CONFIGCHANGETIME_ARRIVE = 1,
-+};
-+
-+struct tsn_notifier_info {
-+	struct net_device *dev;
-+	union {
-+		struct tsn_qbv_conf qbv_notify;
-+		struct tsn_qci_psfp_sgi_conf qci_notify;
-+	} ntdata;
-+};
-+
-+static inline struct net_device *
-+tsn_notifier_info_to_dev(const struct tsn_notifier_info *info)
-+{
-+	return info->dev;
-+}
-+
-+struct tsn_ops {
-+	void (*device_init)(struct net_device *ndev);
-+	void (*device_deinit)(struct net_device *ndev);
-+	u32 (*get_capability)(struct net_device *ndev);
-+	/* Qbv standard */
-+	int (*qbv_set)(struct net_device *ndev, struct tsn_qbv_conf *qbvconf);
-+	int (*qbv_get)(struct net_device *ndev, struct tsn_qbv_conf *qbvconf);
-+	int (*qbv_get_status)(struct net_device *ndev,
-+				struct tsn_qbv_status *qbvstat);
-+	int (*cb_streamid_set)(struct net_device *ndev, u32 index,
-+				bool enable, struct tsn_cb_streamid *sid);
-+	int (*cb_streamid_get)(struct net_device *ndev, u32 index,
-+				struct tsn_cb_streamid *sid);
-+	int (*cb_streamid_counters_get)(struct net_device *ndev, u32 index,
-+				struct tsn_cb_streamid_counters *sidcounter);
-+	int (*qci_get_maxcap)(struct net_device *ndev,
-+				struct tsn_qci_psfp_stream_param *qcicapa);
-+	int (*qci_sfi_set)(struct net_device *ndev, u32 index, bool enable,
-+				struct tsn_qci_psfp_sfi_conf *sficonf);
-+	/* return: 0 stream filter instance not valid
-+	 * 1 stream filter instance valid
-+	 * -1 error happened
-+	 */
-+	int (*qci_sfi_get)(struct net_device *ndev, u32 index,
-+				struct tsn_qci_psfp_sfi_conf *sficonf);
-+	int (*qci_sfi_counters_get)(struct net_device *ndev, u32 index,
-+				struct tsn_qci_psfp_sfi_counters *sficounter);
-+	int (*qci_sgi_set)(struct net_device *ndev, u32 index,
-+				struct tsn_qci_psfp_sgi_conf *sgiconf);
-+	int (*qci_sgi_get)(struct net_device *ndev, u32 index,
-+				struct tsn_qci_psfp_sgi_conf *sgiconf);
-+	int (*qci_sgi_status_get)(struct net_device *ndev, u16 index,
-+				struct tsn_psfp_sgi_status *sgistat);
-+	int (*qci_fmi_set)(struct net_device *ndev, u32 index, bool enable,
-+				struct tsn_qci_psfp_fmi *fmi);
-+	int (*qci_fmi_get)(struct net_device *ndev, u32 index,
-+				struct tsn_qci_psfp_fmi *fmi,
-+				struct tsn_qci_psfp_fmi_counters *counters);
-+	int (*cbs_set)(struct net_device *ndev, u8 tc, u8 bw);
-+	int (*cbs_get)(struct net_device *ndev, u8 tc);
-+	/* To set a 8 bits vector shows 8 traffic classes
-+	 * preemtable(1) or express(0)
-+	 */
-+	int (*qbu_set)(struct net_device *ndev, u8 ptvector);
-+	/* To get port preemtion status */
-+	int (*qbu_get)(struct net_device *ndev,
-+				struct tsn_preempt_status *preemptstat);
-+	int (*tsd_set)(struct net_device *ndev, struct tsn_tsd *tsd);
-+	int (*tsd_get)(struct net_device *ndev, struct tsn_tsd_status *stats);
-+	int (*ct_set)(struct net_device *ndev, u8 cut_thru);
-+	int (*cbgen_set)(struct net_device *ndev, u32 index,
-+			 struct tsn_seq_gen_conf *seqgen);
-+	int (*cbrec_set)(struct net_device *ndev, u32 index,
-+			 struct tsn_seq_rec_conf *seqrec);
-+	int (*cb_get)(struct net_device *ndev, u32 index,
-+		      struct tsn_cb_status  *c);
-+	int (*dscp_set)(struct net_device *ndev, bool enable,
-+			const u8 dscp_ix,
-+			struct tsn_qos_switch_dscp_conf *c);
-+};
-+
-+enum ethdev_type {
-+	TSN_SWITCH,
-+	TSN_ENDPOINT,
-+};
-+
-+#define GROUP_OFFSET_SWITCH 256
-+
-+struct tsn_port {
-+	u16 groupid;
-+	struct tsn_ops *tsnops;
-+	struct net_device *netdev;
-+	struct list_head list;
-+	enum ethdev_type type;
-+	u8 tc_nums;
-+	struct tsn_notifier_info nd;
-+};
-+
-+struct tsn_port *tsn_get_port(struct net_device *ndev);
-+int register_tsn_notifier(struct notifier_block *nb);
-+int unregister_tsn_notifier(struct notifier_block *nb);
-+int call_tsn_notifiers(unsigned long val, struct net_device *dev,
-+			     struct tsn_notifier_info *info);
-+int tsn_port_register(struct net_device *netdev,
-+				struct tsn_ops *tsnops, u16 groupid);
-+void tsn_port_unregister(struct net_device *netdev);
-+#endif
---- /dev/null
-+++ b/include/uapi/linux/tsn.h
-@@ -0,0 +1,1207 @@
-+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-+/* Copyright 2017-2019 NXP */
-+
-+#ifndef __UAPI_GENL_TSN_H
-+#define __UAPI_GENL_TSN_H
-+
-+#define	TSN_GENL_NAME		"TSN_GEN_CTRL"
-+#define	TSN_GENL_VERSION	0x1
-+
-+#define MAX_USER_SIZE 0
-+#define MAX_ATTR_SIZE 3072
-+#define MAX_TOTAL_MSG_SIZE  (MAX_USER_SIZE + MAX_ATTR_SIZE)
-+#define MAX_ENTRY_SIZE 2048
-+#define MAX_ENTRY_NUMBER 128
-+#define MAX_IFNAME_COUNT 64
-+
-+#define TSN_MULTICAST_GROUP_QBV	"qbv"
-+#define TSN_MULTICAST_GROUP_QCI	"qci"
-+
-+/* multicast groups */
-+enum tsn_multicast_groups {
-+	TSN_MCGRP_QBV,
-+	TSN_MCGRP_QCI,
-+	TSN_MCGRP_MAX
-+};
-+
-+enum tsn_capability {
-+	TSN_CAP_QBV = 0x1,
-+	TSN_CAP_QCI = 0x2,
-+	TSN_CAP_QBU = 0x4,
-+	TSN_CAP_CBS = 0x8, /* Credit-based Shapter Qav */
-+	TSN_CAP_CB  = 0x10, /* 8021CB redundancy and replication */
-+	TSN_CAP_TBS = 0x20, /* Time Based schedule */
-+	TSN_CAP_CTH = 0x40, /* cut through */
-+};
-+
-+/*
-+ * Commands sent from userspace
-+ * Not versioned. New commands should only be inserted at the enum's end
-+ * prior to __TSN_CMD_MAX
-+ */
-+
-+enum {
-+	TSN_CMD_UNSPEC = 0,	/* Reserved */
-+	TSN_CMD_QBV_SET,
-+	TSN_CMD_QBV_GET,
-+	TSN_CMD_QBV_GET_STATUS,
-+	TSN_CMD_CB_STREAMID_SET,
-+	TSN_CMD_CB_STREAMID_GET,
-+	TSN_CMD_CB_STREAMID_GET_COUNTS,
-+	TSN_CMD_QCI_CAP_GET, /* Qci capability get length capability get */
-+	TSN_CMD_QCI_SFI_SET,
-+	TSN_CMD_QCI_SFI_GET,
-+	TSN_CMD_QCI_SFI_GET_COUNTS,
-+	TSN_CMD_QCI_SGI_SET,
-+	TSN_CMD_QCI_SGI_GET,
-+	TSN_CMD_QCI_SGI_GET_STATUS,
-+	TSN_CMD_QCI_FMI_SET,
-+	TSN_CMD_QCI_FMI_GET,
-+	TSN_CMD_CBS_SET,
-+	TSN_CMD_CBS_GET,
-+	TSN_CMD_QBU_SET,
-+	TSN_CMD_QBU_GET_STATUS,
-+	TSN_CMD_QAV_SET_CBS,
-+	TSN_CMD_QAV_GET_CBS,
-+	TSN_CMD_TSD_SET,
-+	TSN_CMD_TSD_GET,
-+	TSN_CMD_CT_SET,
-+	TSN_CMD_CBGEN_SET,
-+	TSN_CMD_CBREC_SET,
-+	TSN_CMD_CBSTAT_GET,
-+	TSN_CMD_PCPMAP_SET_UNUSE,
-+	TSN_CMD_DSCP_SET,
-+	TSN_CMD_ECHO,			/* user->kernel request/get-response */
-+	TSN_CMD_REPLY,			/* kernel->user event */
-+	TSN_CMD_CAP_GET,
-+	__TSN_CMD_MAX,
-+};
-+#define TSN_CMD_MAX (__TSN_CMD_MAX - 1)
-+
-+
-+enum {
-+	TSN_CMD_ATTR_UNSPEC = 0,
-+	TSN_CMD_ATTR_MESG,		/* demo message  */
-+	TSN_CMD_ATTR_DATA,		/* demo data */
-+	TSN_ATTR_IFNAME,
-+	TSN_ATTR_PORT_NUMBER,
-+	TSN_ATTR_QBV,
-+	TSN_ATTR_STREAM_IDENTIFY, /* stream identify */
-+	TSN_ATTR_QCI_SP,		/* psfp port capbility parameters */
-+	TSN_ATTR_QCI_SFI,		/* psfp stream filter instance */
-+	TSN_ATTR_QCI_SGI,		/* psfp stream gate instance */
-+	TSN_ATTR_QCI_FMI,		/* psfp flow meter instance */
-+	TSN_ATTR_CBS,			/* credit-based shaper */
-+	TSN_ATTR_TSD,			/* Time Specific Departure */
-+	TSN_ATTR_QBU,			/* preemption */
-+	TSN_ATTR_CT,			/* cut through */
-+	TSN_ATTR_CBGEN,			/* 802.1CB sequence generate */
-+	TSN_ATTR_CBREC,			/* 802.1CB sequence recover */
-+	TSN_ATTR_CBSTAT,                 /* 802.1CB status */
-+	TSN_ATTR_PCPMAP_UNUSE,
-+	TSN_ATTR_DSCP,
-+	TSN_ATTR_CAP,		/* TSN capbility */
-+	__TSN_CMD_ATTR_MAX,
-+};
-+#define TSN_CMD_ATTR_MAX (__TSN_CMD_ATTR_MAX - 1)
-+
-+enum {
-+	TSN_CAP_ATTR_UNSPEC,
-+	TSN_CAP_ATTR_QBV,
-+	TSN_CAP_ATTR_QCI,
-+	TSN_CAP_ATTR_QBU,
-+	TSN_CAP_ATTR_CBS,
-+	TSN_CAP_ATTR_CB,
-+	TSN_CAP_ATTR_TBS,
-+	TSN_CAP_ATTR_CTH,
-+	__TSN_CAP_ATTR_MAX,
-+	TSN_CAP_ATTR_MAX = __TSN_CAP_ATTR_MAX - 1,
-+};
-+
-+enum {
-+	TSN_QBU_ATTR_UNSPEC,
-+	TSN_QBU_ATTR_ADMIN_STATE,
-+	TSN_QBU_ATTR_HOLD_ADVANCE,
-+	TSN_QBU_ATTR_RELEASE_ADVANCE,
-+	TSN_QBU_ATTR_ACTIVE,
-+	TSN_QBU_ATTR_HOLD_REQUEST,
-+	__TSN_QBU_ATTR_MAX,
-+	TSN_QBU_ATTR_MAX = __TSN_QBU_ATTR_MAX - 1,
-+};
-+
-+enum {
-+	TSN_CBS_ATTR_UNSPEC,
-+	TSN_CBS_ATTR_TC_INDEX,
-+	TSN_CBS_ATTR_BW,
-+	__TSN_CBS_ATTR_MAX,
-+	TSN_CBS_ATTR_MAX = __TSN_CBS_ATTR_MAX - 1,
-+};
-+
-+enum {
-+	TSN_TSD_ATTR_UNSPEC,
-+	TSN_TSD_ATTR_DISABLE,
-+	TSN_TSD_ATTR_ENABLE,
-+	TSN_TSD_ATTR_PERIOD,
-+	TSN_TSD_ATTR_MAX_FRM_NUM,
-+	TSN_TSD_ATTR_CYCLE_NUM,
-+	TSN_TSD_ATTR_LOSS_STEPS,
-+	TSN_TSD_ATTR_SYN_IMME,
-+	__TSN_TSD_ATTR_MAX,
-+	TSN_TSD_ATTR_MAX = __TSN_TSD_ATTR_MAX - 1,
-+};
-+
-+enum {
-+	TSN_STREAMID_ATTR_UNSPEC,
-+	TSN_STREAMID_ATTR_INDEX,
-+	TSN_STREAMID_ATTR_ENABLE,
-+	TSN_STREAMID_ATTR_DISABLE,
-+	TSN_STREAMID_ATTR_STREAM_HANDLE,
-+	TSN_STREAMID_ATTR_IFOP,
-+	TSN_STREAMID_ATTR_OFOP,
-+	TSN_STREAMID_ATTR_IFIP,
-+	TSN_STREAMID_ATTR_OFIP,
-+	TSN_STREAMID_ATTR_TYPE,
-+	TSN_STREAMID_ATTR_NDMAC,
-+	TSN_STREAMID_ATTR_NTAGGED,
-+	TSN_STREAMID_ATTR_NVID,
-+	TSN_STREAMID_ATTR_SMAC,
-+	TSN_STREAMID_ATTR_STAGGED,
-+	TSN_STREAMID_ATTR_SVID,
-+	TSN_STREAMID_ATTR_COUNTERS_PSI,
-+	TSN_STREAMID_ATTR_COUNTERS_PSO,
-+	TSN_STREAMID_ATTR_COUNTERS_PSPPI,
-+	TSN_STREAMID_ATTR_COUNTERS_PSPPO,
-+	__TSN_STREAMID_ATTR_MAX,
-+	TSN_STREAMID_ATTR_MAX = __TSN_STREAMID_ATTR_MAX - 1,
-+};
-+
-+enum {
-+	TSN_QCI_STREAM_ATTR_UNSPEC = 0,
-+	TSN_QCI_STREAM_ATTR_MAX_SFI,
-+	TSN_QCI_STREAM_ATTR_MAX_SGI,
-+	TSN_QCI_STREAM_ATTR_MAX_FMI,
-+	TSN_QCI_STREAM_ATTR_SLM,
-+	__TSN_QCI_STREAM_ATTR_MAX,
-+	TSN_QCI_STREAM_ATTR_MAX = __TSN_QCI_STREAM_ATTR_MAX - 1,
-+};
-+
-+enum {
-+	TSN_QCI_SFI_ATTR_UNSPEC = 0,
-+	TSN_QCI_SFI_ATTR_INDEX,
-+	TSN_QCI_SFI_ATTR_ENABLE,
-+	TSN_QCI_SFI_ATTR_DISABLE,
-+	TSN_QCI_SFI_ATTR_STREAM_HANDLE,
-+	TSN_QCI_SFI_ATTR_PRIO_SPEC,
-+	TSN_QCI_SFI_ATTR_GATE_ID,
-+	TSN_QCI_SFI_ATTR_FILTER_TYPE,
-+	TSN_QCI_SFI_ATTR_FLOW_ID,
-+	TSN_QCI_SFI_ATTR_MAXSDU,
-+	TSN_QCI_SFI_ATTR_COUNTERS,
-+	TSN_QCI_SFI_ATTR_OVERSIZE_ENABLE,
-+	TSN_QCI_SFI_ATTR_OVERSIZE,
-+	__TSN_QCI_SFI_ATTR_MAX,
-+	TSN_QCI_SFI_ATTR_MAX = __TSN_QCI_SFI_ATTR_MAX - 1,
-+};
-+
-+enum {
-+	TSN_QCI_SFI_ATTR_COUNTERS_UNSPEC = 0,
-+	TSN_QCI_SFI_ATTR_MATCH,
-+	TSN_QCI_SFI_ATTR_PASS,
-+	TSN_QCI_SFI_ATTR_DROP,
-+	TSN_QCI_SFI_ATTR_SDU_DROP,
-+	TSN_QCI_SFI_ATTR_SDU_PASS,
-+	TSN_QCI_SFI_ATTR_RED,
-+	__TSN_QCI_SFI_ATTR_COUNT_MAX,
-+	TSN_QCI_SFI_ATTR_COUNT_MAX = __TSN_QCI_SFI_ATTR_COUNT_MAX - 1,
-+};
-+
-+enum {
-+	TSN_QCI_SGI_ATTR_UNSPEC = 0,
-+	TSN_QCI_SGI_ATTR_INDEX,
-+	TSN_QCI_SGI_ATTR_ENABLE,
-+	TSN_QCI_SGI_ATTR_DISABLE,
-+	TSN_QCI_SGI_ATTR_CONFCHANGE,
-+	TSN_QCI_SGI_ATTR_IRXEN,		/* Invalid rx enable*/
-+	TSN_QCI_SGI_ATTR_IRX,
-+	TSN_QCI_SGI_ATTR_OEXEN,		/* Octet exceed enable */
-+	TSN_QCI_SGI_ATTR_OEX,
-+	TSN_QCI_SGI_ATTR_ADMINENTRY,
-+	TSN_QCI_SGI_ATTR_OPERENTRY,
-+	TSN_QCI_SGI_ATTR_CCTIME,	/* config change time */
-+	TSN_QCI_SGI_ATTR_TICKG,
-+	TSN_QCI_SGI_ATTR_CUTIME,
-+	TSN_QCI_SGI_ATTR_CPENDING,
-+	TSN_QCI_SGI_ATTR_CCERROR,
-+	__TSN_QCI_SGI_ATTR_MAX,
-+	TSN_QCI_SGI_ATTR_MAX = __TSN_QCI_SGI_ATTR_MAX - 1,
-+};
-+
-+enum {
-+	TSN_SGI_ATTR_CTRL_UNSPEC = 0,
-+	TSN_SGI_ATTR_CTRL_INITSTATE,
-+	TSN_SGI_ATTR_CTRL_LEN,
-+	TSN_SGI_ATTR_CTRL_CYTIME,
-+	TSN_SGI_ATTR_CTRL_CYTIMEEX,
-+	TSN_SGI_ATTR_CTRL_BTIME,
-+	TSN_SGI_ATTR_CTRL_INITIPV,
-+	TSN_SGI_ATTR_CTRL_GCLENTRY,
-+	__TSN_SGI_ATTR_CTRL_MAX,
-+	TSN_SGI_ATTR_CTRL_MAX = __TSN_SGI_ATTR_CTRL_MAX - 1,
-+};
-+
-+enum {
-+	TSN_SGI_ATTR_GCL_UNSPEC = 0,
-+	TSN_SGI_ATTR_GCL_GATESTATE,
-+	TSN_SGI_ATTR_GCL_IPV,
-+	TSN_SGI_ATTR_GCL_INTERVAL,
-+	TSN_SGI_ATTR_GCL_OCTMAX,
-+	__TSN_SGI_ATTR_GCL_MAX,
-+	TSN_SGI_ATTR_GCL_MAX = __TSN_SGI_ATTR_GCL_MAX - 1,
-+};
-+
-+enum {
-+	TSN_QCI_FMI_ATTR_UNSPEC = 0,
-+	TSN_QCI_FMI_ATTR_INDEX,
-+	TSN_QCI_FMI_ATTR_ENABLE,
-+	TSN_QCI_FMI_ATTR_DISABLE,
-+	TSN_QCI_FMI_ATTR_CIR,
-+	TSN_QCI_FMI_ATTR_CBS,
-+	TSN_QCI_FMI_ATTR_EIR,
-+	TSN_QCI_FMI_ATTR_EBS,
-+	TSN_QCI_FMI_ATTR_CF,
-+	TSN_QCI_FMI_ATTR_CM,
-+	TSN_QCI_FMI_ATTR_DROPYL,
-+	TSN_QCI_FMI_ATTR_MAREDEN,
-+	TSN_QCI_FMI_ATTR_MARED,
-+	TSN_QCI_FMI_ATTR_COUNTERS,
-+	__TSN_QCI_FMI_ATTR_MAX,
-+	TSN_QCI_FMI_ATTR_MAX = __TSN_QCI_FMI_ATTR_MAX - 1,
-+};
-+
-+enum {
-+	TSN_QBV_ATTR_UNSPEC,
-+	TSN_QBV_ATTR_ENABLE,
-+	TSN_QBV_ATTR_DISABLE,
-+	TSN_QBV_ATTR_CONFIGCHANGE,
-+	TSN_QBV_ATTR_CONFIGCHANGETIME,
-+	TSN_QBV_ATTR_MAXSDU,
-+	TSN_QBV_ATTR_GRANULARITY,
-+	TSN_QBV_ATTR_CURRENTTIME,
-+	TSN_QBV_ATTR_CONFIGPENDING,
-+	TSN_QBV_ATTR_CONFIGCHANGEERROR,
-+	TSN_QBV_ATTR_ADMINENTRY,
-+	TSN_QBV_ATTR_OPERENTRY,
-+	TSN_QBV_ATTR_LISTMAX,
-+	__TSN_QBV_ATTR_MAX,
-+	TSN_QBV_ATTR_MAX = __TSN_QBV_ATTR_MAX - 1,
-+};
-+
-+enum {
-+	TSN_QBV_ATTR_CTRL_UNSPEC,
-+	TSN_QBV_ATTR_CTRL_LISTCOUNT,
-+	TSN_QBV_ATTR_CTRL_GATESTATE,
-+	TSN_QBV_ATTR_CTRL_CYCLETIME,
-+	TSN_QBV_ATTR_CTRL_CYCLETIMEEXT,
-+	TSN_QBV_ATTR_CTRL_BASETIME,
-+	TSN_QBV_ATTR_CTRL_LISTENTRY,
-+	__TSN_QBV_ATTR_CTRL_MAX,
-+	TSN_QBV_ATTR_CTRL_MAX = __TSN_QBV_ATTR_CTRL_MAX - 1,
-+};
-+
-+enum {
-+	TSN_QBV_ATTR_ENTRY_UNSPEC,
-+	TSN_QBV_ATTR_ENTRY_ID,
-+	TSN_QBV_ATTR_ENTRY_GC,
-+	TSN_QBV_ATTR_ENTRY_TM,
-+	__TSN_QBV_ATTR_ENTRY_MAX,
-+	TSN_QBV_ATTR_ENTRY_MAX = __TSN_QBV_ATTR_ENTRY_MAX - 1,
-+};
-+
-+enum {
-+	TSN_CT_ATTR_UNSPEC,
-+	TSN_CT_ATTR_QUEUE_STATE,
-+	__TSN_CT_ATTR_MAX,
-+	TSN_CT_ATTR_MAX = __TSN_CT_ATTR_MAX - 1,
-+};
-+
-+enum {
-+	TSN_CBGEN_ATTR_UNSPEC,
-+	TSN_CBGEN_ATTR_INDEX,
-+	TSN_CBGEN_ATTR_PORT_MASK,
-+	TSN_CBGEN_ATTR_SPLIT_MASK,
-+	TSN_CBGEN_ATTR_SEQ_LEN,
-+	TSN_CBGEN_ATTR_SEQ_NUM,
-+	__TSN_CBGEN_ATTR_MAX,
-+	TSN_CBGEN_ATTR_MAX = __TSN_CBGEN_ATTR_MAX - 1,
-+};
-+
-+enum {
-+	TSN_CBREC_ATTR_UNSPEC,
-+	TSN_CBREC_ATTR_INDEX,
-+	TSN_CBREC_ATTR_SEQ_LEN,
-+	TSN_CBREC_ATTR_HIS_LEN,
-+	TSN_CBREC_ATTR_TAG_POP_EN,
-+	__TSN_CBREC_ATTR_MAX,
-+	TSN_CBREC_ATTR_MAX = __TSN_CBREC_ATTR_MAX - 1,
-+};
-+
-+enum {
-+	TSN_CBSTAT_ATTR_UNSPEC,
-+	TSN_CBSTAT_ATTR_INDEX,
-+	TSN_CBSTAT_ATTR_GEN_REC,
-+	TSN_CBSTAT_ATTR_ERR,
-+	TSN_CBSTAT_ATTR_SEQ_NUM,
-+	TSN_CBSTAT_ATTR_SEQ_LEN,
-+	TSN_CBSTAT_ATTR_SPLIT_MASK,
-+	TSN_CBSTAT_ATTR_PORT_MASK,
-+	TSN_CBSTAT_ATTR_HIS_LEN,
-+	TSN_CBSTAT_ATTR_SEQ_HIS,
-+	__TSN_CBSTAT_ATTR_MAX,
-+	TSN_CBSTAT_ATTR_MAX = __TSN_CBSTAT_ATTR_MAX - 1,
-+};
-+
-+enum {
-+	TSN_DSCP_ATTR_UNSPEC,
-+	TSN_DSCP_ATTR_DISABLE,
-+	TSN_DSCP_ATTR_INDEX,
-+	TSN_DSCP_ATTR_COS,
-+	TSN_DSCP_ATTR_DPL,
-+	__TSN_DSCP_ATTR_MAX,
-+	TSN_DSCP_ATTR_MAX = __TSN_DSCP_ATTR_MAX - 1,
-+};
-+
-+#define ptptime_t __u64
-+
-+#define MAX_QUEUE_CNT 8
-+
-+struct tsn_preempt_status {
-+	/* The value of admin_state shows a 8-bits vector value for showing
-+	 * the framePreemptionAdminStatus parameter and PreemptionPriority
-+	 * for the traffic class. Bit-7 is the highest priority traffic class
-+	 * and the bit-0 is the lowest priority traffic class.
-+	 * The bit is express (0) and is preemptible (1).
-+	 */
-+	__u8 admin_state;
-+	/* The value of the holdAdvance parameter for the port in nanoseconds.
-+	 * There is no default value; the holdAdvance is a property of the
-+	 * underlying MAC." This parameter corresponds to the holdAdvance
-+	 * parameter in 802.1Qbu.
-+	 */
-+	__u32 hold_advance;
-+
-+	/* The value of the releaseAdvance parameter for the port in
-+	 * nanoseconds.  There is no default value; the releaseAdvance is a
-+	 * property of the underlying MAC." This parameter corresponds to the
-+	 * releaseAdvance parameter in 802.1Qbu.
-+	 */
-+	__u32 release_advance;
-+
-+	/* The value is active (TRUE) when preemption is operationally active
-+	 * for the port, and idle (FALSE) otherwise.  This parameter corresponds
-+	 * to the preemptionActive parameter in 802.1Qbu.
-+	 */
-+	__u8 preemption_active;
-+
-+	/* The value is hold (1) when the sequence of gate operations for
-+	 * the port has executed a Set-And-Hold-MAC operation, and release
-+	 * (2) when the sequence of gate operations has executed a
-+	 * Set-And-Release-MAC operation. The value of this object is release
-+	 * (FALSE) on system initialization.  This parameter corresponds to the
-+	 * holdRequest parameter in 802.1Qbu.
-+	 */
-+	__u8 hold_request;
-+};
-+
-+enum tsn_tx_mode  {
-+	TX_MODE_STRICT,
-+	TX_MODE_CBS,
-+	TX_MODE_ETS,
-+	TX_MODE_VENDOR_DEFINE = 255,
-+};
-+
-+#define QUEUE_TX_MASK ((1 << TX_MODE_STRICT) | (1 << TX_MODE_CBS) \
-+			| (1 << TX_MODE_ETS) | (1 << TX_MODE_VENDOR_DEFINE))
-+
-+struct cbs_status {
-+	__u8 delta_bw; /* percentage, 0~100 */
-+	__u32 idleslope;
-+	__s32 sendslope;
-+	__u32 maxframesize;
-+	__u32 hicredit;
-+	__s32 locredit;
-+	__u32 maxninference;
-+};
-+
-+struct tx_queue {
-+	/* tx_queue_capbility shows the queue's capability mask.
-+	 * refer the enum tsn_tx_mode
-+	 */
-+	__u8 capability;
-+
-+	/* tx_queue_mode is current queue working mode */
-+	__u8 mode;
-+
-+	/* prio is showing the queue priority */
-+	__u8 prio;
-+
-+	/* mstat shows the status data of cbs or priority */
-+	union {
-+		struct cbs_status cbs;
-+	};
-+};
-+
-+struct port_status {
-+	/* txqueue_cnt shows how many queues in this port */
-+	__u8 queue_cnt;
-+
-+	/* max_rate(Mbit/s) is the port transmit rate current port is setting */
-+	__u32 max_rate;
-+
-+	/* tsn_capability mask the tsn capability */
-+	__u32 tsn_capability;
-+};
-+
-+enum tsn_cb_streamid_type {
-+	STREAMID_RESERVED = 0,
-+	/* Null Stream identification */
-+	STREAMID_NULL,
-+	/* Source MAC and VLAN Stream identification */
-+	STREAMID_SMAC_VLAN,
-+	/* Active Destination MAC and VLAN stream identification */
-+	STREAMID_DMAC_VLAN,
-+	/* IP stream identification */
-+	STREAMID_IP,
-+};
-+
-+/* When instantiating an instance of the Null Stream identification function
-+ * 8021CB(6.4) for a particular input Stream, the managed objects in the
-+ * following subsections serve as the tsnStreamIdParameters managed object
-+ * 8021CB claus(9.1.1.7).
-+ */
-+struct tsn_cb_null_streamid {
-+	/* tsnCpeNullDownDestMac. Specifies the destination_address that
-+	 * identifies a packet in an Enhanced Internal Sublayer Service (EISS)
-+	 * indication primitive, to the Null Stream identification function.
-+	 */
-+	__u64 dmac;
-+
-+	/* tsnCpeNullDownTagged. It can take the following values:
-+	 * 1 tagged: A frame must have a VLAN tag to be recognized as belonging
-+	 * to the Stream.
-+	 * 2 priority: A frame must be untagged, or have a VLAN tag with a VLAN
-+	 * ID = 0 to be recognized as belonging to the Stream.
-+	 * 3 all: A frame is recognized as belonging to the Stream whether
-+	 * tagged or not.
-+	 */
-+	__u8 tagged;
-+
-+	/* tsnCpeNullDownVlan. Specifies the vlan_identifier parameter that
-+	 * identifies a packet in an EISS indication primitive to the Null
-+	 * Stream identification function. A value of 0 indicates that the vlan
-+	 * _identifier parameter is ignored on EISS indication primitives.
-+	 */
-+	__u16 vid;
-+};
-+
-+struct tsn_cb_source_streamid {
-+	__u64 smac;
-+	__u8 tagged;
-+	__u16 vid;
-+};
-+
-+struct tsn_cb_dest_streamid {
-+	__u64 down_dmac;
-+	__u8 down_tagged;
-+	__u16 down_vid;
-+	__u8 down_prio;
-+	__u64 up_dmac;
-+	__u8 up_tagged;
-+	__u16 up_vid;
-+	__u8 up_prio;
-+};
-+
-+struct tsn_cb_ip_streamid {
-+	__u64 dmac;
-+	__u8 tagged;
-+	__u16 vid;
-+	__u64 siph;
-+	__u64 sipl;
-+	__u64 diph;
-+	__u64 dipl;
-+	__u8 dscp;
-+	__u8 npt;
-+	__u16 sport;
-+	__u16 dport;
-+};
-+
-+/* 802.1CB stream identify table clause 9.1 */
-+struct tsn_cb_streamid {
-+	/* The objects in a given entry of the Stream identity table are used
-+	 * to control packets whose stream_handle subparameter is equal to the
-+	 * entry tsnStreamIdHandle object.
-+	 */
-+	__s32 handle;
-+
-+	/* The list of ports on which an in-facing Stream identification
-+	 * function in the output (towards the system forwarding function)
-+	 * direction Only Active Destination MAC and VLAN Stream identification
-+	 * (or nothing) can be configured.
-+	 */
-+	__u32 ifac_oport;
-+
-+	/* The list of ports on which an out-facing Stream identification
-+	 * function in the output (towards the physical interface) direction.
-+	 * Only Active Destination MAC and VLAN Stream identification
-+	 * (or nothing) can be configured.
-+	 */
-+	__u32 ofac_oport;
-+
-+	/* The list of ports on which an in-facing Stream identification
-+	 * function in the input (coming from the system forwarding function)
-+	 * direction
-+	 */
-+	__u32 ifac_iport;
-+
-+	/* The list of ports on which an out-facing Stream identification
-+	 * function in the input (coming from the physical interface) direction
-+	 * .
-+	 */
-+	__u32 ofac_iport;
-+
-+	/* An enumerated value indicating the method used to identify packets
-+	 * belonging to the Stream.
-+	 * The Organizationally Unique Identifier (OUI) or Company Identifier
-+	 * (CID) to identify the organization defining the enumerated type
-+	 * should be: 00-80-C2
-+	 * 1: null stream identification
-+	 * 2: source mac and vlan stream identification
-+	 * 3: activ destination mac and vlan stream identification
-+	 * 4: ip stream identifaciton
-+	 */
-+	__u8 type;
-+
-+	/* tsnStreamIdParameters The number of controlling parameters for a
-+	 * Stream identification method, their types and values, are specific
-+	 * to the tsnStreamIdIdentificationType
-+	 */
-+	union {
-+		struct tsn_cb_null_streamid nid;
-+		struct tsn_cb_source_streamid sid;
-+		struct tsn_cb_dest_streamid did;
-+		struct tsn_cb_ip_streamid iid;
-+	} para;
-+};
-+
-+/* Following counters are instantiated for each port on which the Stream
-+ * identification function (6.2) is configured. The counters are indexed by
-+ * port number, facing (in-facing or out-facing), and stream_handle value
-+ * (tsnStreamIdHandle, 9.1.1.1).
-+ */
-+struct tsn_cb_streamid_counters {
-+	struct {
-+		__u64 input;
-+		__u64 output;
-+	} per_stream;
-+
-+	struct {
-+		__u64 input;
-+		__u64 output;
-+	} per_streamport[32];
-+};
-+
-+/* 802.1Qci Stream Parameter Table, read from port */
-+struct tsn_qci_psfp_stream_param {
-+	/* MaxStreamFilterInstances.
-+	 * The maximum number of Stream Filter instances supported by this
-+	 * Bridge component.
-+	 */
-+	__s32 max_sf_instance;
-+
-+	/* MaxStreamGateInstances
-+	 * The maximum number of Stream Gate instances supported by this Bridge
-+	 * component.
-+	 */
-+	__s32 max_sg_instance;
-+
-+	/* MaxFlowMeterInstances
-+	 * The maximum number of Flow Meter instances supported by this Bridge
-+	 * component.
-+	 */
-+	__s32 max_fm_instance;
-+
-+	/* SupportedListMax
-+	 * The maximum value supported by this Bridge component of the
-+	 * AdminControlListLength and OperControlListLength parameters.
-+	 */
-+	__s32 supported_list_max;
-+};
-+
-+/* 802.1Qci Stream Filter Instance Table, counters part only. */
-+struct tsn_qci_psfp_sfi_counters {
-+	/* The MatchingFramesCount counter counts received frames that match
-+	 * this stream filter.
-+	 */
-+	__u64 matching_frames_count;
-+
-+	/* The PassingFramesCount counter counts received frames that pass the
-+	 * gate associated with this stream filter.
-+	 */
-+	__u64 passing_frames_count;
-+
-+	/* The NotPassingFramesCount counter counts received frames that do not
-+	 * pass the gate associated with this stream filter.
-+	 */
-+	__u64 not_passing_frames_count;
-+
-+	/* The PassingSDUCount counter counts received frames that pass the SDU
-+	 * size filter specification associated with this stream filter.
-+	 */
-+	__u64 passing_sdu_count;
-+
-+	/* The NotPassingSDUCount counter counts received frames that do not
-+	 * pass the SDU size filter specification associated with this stream
-+	 * filter.
-+	 */
-+	__u64 not_passing_sdu_count;
-+
-+	/* The  REDFramesCount counter counts received random early detection
-+	 * (RED) frames associated with this stream filter.
-+	 */
-+	__u64 red_frames_count;
-+};
-+
-+/* 802.1Qci Stream Filter Instance Table, configuration part only. */
-+struct tsn_qci_psfp_sfi_conf {
-+
-+	/* The StreamHandleSpec parameter contains a stream identifier
-+	 * specification value. A value of -1 denotes the wild card value; zero
-+	 * or positive values denote stream identifier values.
-+	 */
-+	__s32 stream_handle_spec;
-+
-+	/* The PrioritySpec parameter contains a priority specification value.
-+	 * A value of -1 denotes the wild card value; zero or positive values
-+	 * denote priority values.
-+	 */
-+	__s8 priority_spec;
-+
-+	/* The StreamGateInstanceID parameter contains the index of an entry in
-+	 * the Stream Gate Table.
-+	 */
-+	__u32 stream_gate_instance_id;
-+
-+	/* The filter specifications. The actions specified in a filter
-+	 * specification can result in a frame passing or failing the specified
-+	 * filter. Frames that fail a filter are discarded.
-+	 */
-+	struct {
-+		/* The MaximumSDUSize parameter specifies the maximum allowed
-+		 * frame size for the stream. Any frame exceeding this value
-+		 * will be dropped.  A value of 0 denote that the MaximumSDUSize
-+		 * filter is disabled for this stream.
-+		 */
-+		__u16 maximum_sdu_size;
-+
-+		/* The FlowMeterInstanceID parameter contains the index of an
-+		 * entry in the Flow Meter Table.  A value of -1 denotes that
-+		 * no flow meter is assigned; zero or positive values denote
-+		 * flow meter IDs.
-+		 */
-+		__s32 flow_meter_instance_id;
-+	} stream_filter;
-+
-+	/* The StreamBlockedDueToOversizeFrameEnable object contains a Boolean
-+	 * value that indicates whether the StreamBlockedDueToOversizeFrame
-+	 * function is enabled (TRUE) or disabled (FALSE).
-+	 */
-+	__u8 block_oversize_enable;
-+
-+	/* The StreamBlockedDueToOversizeFrame object contains a Boolean value
-+	 * that indicates whether, if the StreamBlockedDueToOversizeFrame
-+	 * function is enabled, all frames are to be discarded (TRUE) or not
-+	 * (FALSE).
-+	 */
-+	__u8 block_oversize;
-+};
-+
-+/* 802.1Qci Stream Gate Control List Entry. */
-+struct tsn_qci_psfp_gcl {
-+	/* The GateState parameter specifies a desired state, open (true) or
-+	 * closed (false), for the stream gate.
-+	 */
-+	__u8 gate_state;
-+
-+	/* An IPV is encoded as a signed integer.  A negative denotes the null
-+	 * value; zero or positive values denote internal priority values.
-+	 */
-+	__s8 ipv;
-+
-+	/* A TimeInterval is encoded in 4 octets as a 32-bit unsigned integer,
-+	 * representing a number of nanoseconds.
-+	 */
-+	__u32 time_interval;
-+
-+	/* The maximum number of octets that are permitted to pass the gate
-+	 * during the specified TimeInterval.  If zero, there is no maximum.
-+	 */
-+	__u32 octet_max;
-+
-+};
-+
-+/* 802.1Qci Stream Gate Admin/Operation common list control parameters */
-+struct tsn_qci_sg_control {
-+	/* The administrative/operation value of the GateStates parameter
-+	 * for the stream gate.  A value of false indicates closed;
-+	 * a value of true indicates open.
-+	 */
-+	__u8 gate_states;
-+
-+	/* The administrative/operation value of the ListMax parameter for the
-+	 * gate. The integer value indicates the number of entries (TLVs) in
-+	 * the AdminControlList/OperControlList.
-+	 */
-+	__u8 control_list_length;
-+
-+	/* The administrative/operation value of the CycleTime parameter for
-+	 * the gate.  The value is an unsigned integer number of nanoseconds.
-+	 */
-+	__u32 cycle_time;
-+
-+	/* The administrative/operation value of the CycleTimeExtension
-+	 * parameter for the gate.  The value is an unsigned integer number
-+	 * of nanoseconds.
-+	 */
-+	__u32 cycle_time_extension;
-+
-+	/* The administrative/operation value of the BaseTime parameter for the
-+	 * gate.  The value is a representation of a PTPtime value, consisting
-+	 * of a 48-bit integer number of seconds and a 32-bit integer number of
-+	 * nanoseconds.
-+	 */
-+	ptptime_t base_time;
-+
-+	/* The administrative/operation value of the IPV parameter for the gate.
-+	 * A value of -1 denotes the null value; zero or positive values denote
-+	 * internal priority values.
-+	 */
-+	__s8 init_ipv;
-+
-+	/* control_list contend the gate control list of
-+	 * administrative/operation
-+	 */
-+	struct tsn_qci_psfp_gcl *gcl;
-+};
-+
-+/* 802.1Qci Stream Gate Instance Table, configuration part only. */
-+struct tsn_qci_psfp_sgi_conf {
-+	/* The GateEnabled parameter determines whether the stream gate is
-+	 * active (true) or inactive (false).
-+	 */
-+	__u8 gate_enabled;
-+
-+	/* The ConfigChange parameter signals the start of a configuration
-+	 * change when it is set to TRUE. This should only be done when the
-+	 * various administrative parameters are all set to appropriate values.
-+	 */
-+	__u8 config_change;
-+
-+	/* admin control parameters with admin control list */
-+	struct tsn_qci_sg_control admin;
-+
-+	/* The GateClosedDueToInvalidRxEnable object contains a Boolean value
-+	 * that indicates whether the GateClosedDueToInvalidRx function is
-+	 * enabled (TRUE) or disabled (FALSE).
-+	 */
-+	__u8 block_invalid_rx_enable;
-+
-+	/* The GateClosedDueToInvalidRx object contains a Boolean value that
-+	 * indicates whether, if the GateClosedDueToInvalidRx function is
-+	 * enabled, all frames are to be discarded (TRUE) or not (FALSE).
-+	 */
-+	__u8 block_invalid_rx;
-+
-+	/* The GateClosedDueToOctetsExceededEnable object contains a Boolean
-+	 * value that indicates whether the GateClosedDueToOctetsExceeded
-+	 * function is enabled (TRUE) or disabled (FALSE).
-+	 */
-+	__u8 block_octets_exceeded_enable;
-+
-+	/* The GateClosedDueToOctetsExceeded object contains a Boolean value
-+	 * that indicates whether, if the GateClosedDueToOctetsExceeded
-+	 * function is enabled, all frames are to be discarded (TRUE) or not
-+	 * (FALSE).
-+	 */
-+	__u8 block_octets_exceeded;
-+};
-+
-+/* 802.1Qci Stream Gate Instance Table, status part only. */
-+struct tsn_psfp_sgi_status {
-+
-+	/* admin control parameters with admin control list */
-+	struct tsn_qci_sg_control oper;
-+
-+	/* The PTPtime at which the next config change is scheduled to occur.
-+	 * The value is a representation of a PTPtime value, consisting of a
-+	 * 48-bit integer number of seconds and a 32-bit integer number of
-+	 * nanoseconds.
-+	 */
-+	ptptime_t config_change_time;
-+
-+	/* The granularity of the cycle time clock, represented as an unsigned
-+	 * number of tenths of nanoseconds.
-+	 */
-+	__u32 tick_granularity;
-+
-+	/* The current time, in PTPtime, as maintained by the local system.
-+	 * The value is a representation of a PTPtime value, consisting of a
-+	 * 48-bit integer number of seconds and a 32-bit integer number of
-+	 * nanoseconds.
-+	 */
-+	ptptime_t current_time;
-+
-+	/* The value of the ConfigPending state machine variable.  The value is
-+	 * TRUE if a configuration change is in progress but has not yet
-+	 * completed.
-+	 */
-+	__u8 config_pending;
-+
-+	/* A counter of the number of times that a re-configuration of the
-+	 * traffic schedule has been requested with the old schedule still
-+	 * running and the requested base time was in the past.
-+	 */
-+	__u64 config_change_error;
-+
-+};
-+
-+/* 802.1Qci Flow Meter Instance Table. */
-+struct tsn_qci_psfp_fmi {
-+	/* The FlowMeterCIR parameter contains an integer value that represents
-+	 * the CIR value for the flow meter, in kbit/s.
-+	 */
-+	__u32 cir;
-+
-+	/* The FlowMeterCBS parameter contains an integer value that represents
-+	 * the CBS value for the flow meter, in octets.
-+	 */
-+	__u32 cbs;
-+
-+	/* The FlowMeterEIR parameter contains an integer value that represents
-+	 * the EIR value for the flow meter, in kbit/s.
-+	 */
-+	__u32 eir;
-+
-+	/* The FlowMeterEBS parameter contains an integer value that represents
-+	 * the EBS value for the flow meter, in octets.
-+	 */
-+	__u32 ebs;
-+
-+	/* The FlowMeterCF parameter contains a Boolean value that represents
-+	 * the CF value for the flow meter, as a Boolean value indicating no
-+	 * coupling (FALSE) or coupling (TRUE).
-+	 */
-+	__u8 cf;
-+
-+	/* The FlowMeterCM parameter contains a Boolean value that represents
-+	 * the CM value for the flow meter, as a Boolean value indicating
-+	 * colorBlind (FALSE) or colorAware (TRUE).
-+	 */
-+	__u8 cm;
-+
-+	/* The FlowMeterDropOnYellow parameter contains a Boolean value that
-+	 * indicates whether yellow frames are dropped (TRUE) or have
-+	 * drop_eligible set to TRUE (FALSE).
-+	 */
-+	__u8 drop_on_yellow;
-+
-+	/* The FlowMeterMarkAllFramesRedEnable parameter contains a Boolean
-+	 * value that indicates whether the MarkAllFramesRed function
-+	 * is enabled (TRUE) or disabled (FALSE).
-+	 */
-+	__u8 mark_red_enable;
-+
-+	/* The FlowMeterMarkAllFramesRed parameter contains a Boolean value
-+	 * that indicates whether, if the MarkAllFramesRed function is enabled,
-+	 * all frames are to be discarded (TRUE) or not (FALSE).
-+	 */
-+	__u8 mark_red;
-+};
-+
-+struct tsn_qci_psfp_fmi_counters {
-+	__u64 bytecount;
-+	__u64 drop;
-+	__u64 dr0_green;
-+	__u64 dr1_green;
-+	__u64 dr2_yellow;
-+	__u64 remark_yellow;
-+	__u64 dr3_red;
-+	__u64 remark_red;
-+};
-+
-+/* 802.1cb */
-+struct tsn_seq_gen_conf {
-+
-+	/* The InputPortMask parameter contains a port mask.
-+	 * If the packet is from input port belonging to this
-+	 * port mask then it's on known stream and sequence
-+	 * generation parameters can be applied.
-+	 */
-+	__u8 iport_mask;
-+
-+	/* The SplitMask parameter contains a output port mask
-+	 * used to add redundant paths.
-+	 */
-+	__u8 split_mask;
-+
-+	/* The SequenceSpaceLenLog parameter is a value to specifies
-+	 * number of bits to be used for sequence number.
-+	 */
-+	__u8 seq_len;
-+
-+	/* The SequenceNumber parameter is a value to used for
-+	 * outgoing packet's sequence number generation.
-+	 */
-+	__u32 seq_num;
-+};
-+
-+struct tsn_seq_rec_conf {
-+
-+	/* The SequenceSpaceLenLog parameter is a value to specifies
-+	 * number of bits to be used for sequence number.
-+	 */
-+	__u8 seq_len;
-+
-+	/* The HistorySpaceLenLog parameter is a value to specifies
-+	 * number of bits to be used for history register.
-+	 */
-+	__u8 his_len;
-+
-+	/* The RTagPopEnable parameter contains a __u8 to enable removal
-+	 * of redundancy tag from the packet.
-+	 */
-+	__u8 rtag_pop_en;
-+};
-+
-+struct tsn_cb_status {
-+
-+	/* The GenRecover parameter contains a value specifies type
-+	 * of stream sequence parameters:
-+	 *	0: Stream sequence parameters are for generation.
-+	 *	1: Stream sequence parameters are for recovery.
-+	 */
-+	__u8 gen_rec;
-+
-+	/* The ErrStatus parameter indicates stream's error status
-+	 * 1: This switch is expected to sequence the stream,
-+	 *    but the incoming packet has sequence number.
-+	 * 2: This switch is expected to recover the stream,
-+	 *    but the incoming packet is NONSEQ.
-+	 */
-+	__u8 err;
-+
-+	/* The SequenceNumber parameter is a value to used for
-+	 * outgoing packet's sequence number generation.
-+	 */
-+	__u32 seq_num;
-+
-+	/* The SequenceSpaceLenLog parameter is a value to specifies
-+	 * number of bits to be used for sequence number.
-+	 */
-+	__u8 seq_len;
-+
-+	/* The SplitMask parameter contains a output port mask
-+	 * used to add redundant paths.
-+	 */
-+	__u8 split_mask;
-+
-+	/* The InputPortMask parameter contains a port mask.
-+	 * If the packet is from input port belonging to this
-+	 * port mask then it's on known stream and sequence
-+	 * generation parameters can be applied.
-+	 */
-+	__u8 iport_mask;
-+
-+	/* The HistorySpaceLenLog parameter is a value to specifies
-+	 * number of bits to be used for history register.
-+	 */
-+	__u8 his_len;
-+
-+	/* The SequenceHistory parameter Maintains history of sequence
-+	 * numbers of received packets.
-+	 */
-+	__u32 seq_his;
-+};
-+
-+/* An entry for gate control list */
-+struct tsn_qbv_entry {
-+	/* Octet represent the gate states for the corresponding traffic
-+	 * classes.
-+	 * The MS bit corresponds to traffic class 7.
-+	 * The LS bit to traffic class 0.
-+	 * A bit value of 0 indicates closed;
-+	 * A bit value of 1 indicates open.
-+	 */
-+	__u8 gate_state;
-+
-+	/* A TimeInterval is encoded in 4 octets as a 32-bit unsigned integer,
-+	 * representing a number of nanoseconds.
-+	 */
-+	__u32 time_interval;
-+};
-+
-+/* The administrative/operation time and gate list */
-+struct tsn_qbv_basic {
-+	/* The administrative/operation value of the GateStates parameter for
-+	 * the Port.
-+	 * The bits of the octet represent the gate states for the
-+	 * corresponding traffic classes; the MS bit corresponds to traffic
-+	 * class 7, the LS bit to traffic class 0. A bit value of 0 indicates
-+	 * closed; a bit value of 1 indicates open.
-+	 * The value of this object MUST be retained
-+	 * across reinitializations of the management system.
-+	 */
-+	__u8 gate_states;
-+
-+	/* The administrative/operation value of the ListMax parameter for the
-+	 * port. The integer value indicates the number of entries (TLVs) in
-+	 * the AdminControlList. The value of this object MUST be retained
-+	 * across reinitializations of the management system.
-+	 */
-+	__u32 control_list_length;
-+
-+	/* The administrative/operation value of the AdminCycleTime
-+	 * parameter for the Port. The numerator and denominator together
-+	 * represent the cycle time as a rational number of seconds.  The value
-+	 * of this object MUST be retained across reinitializations of the
-+	 * management system.
-+	 */
-+	__u32 cycle_time;
-+
-+	/* The administrative/operation value of the CycleTimeExtension
-+	 * parameter for the Port. The value is an unsigned integer number of
-+	 * nanoseconds.
-+	 * The value of this object MUST be retained across reinitializations
-+	 * of the management system.
-+	 */
-+
-+	__u32 cycle_time_extension;
-+
-+	/* The administrative/operation value of the BaseTime parameter for the
-+	 * Port.  The value is a representation of a PTPtime value, consisting
-+	 * of a 48-bit integer number of seconds and a 32-bit integer number of
-+	 * nanoseconds.
-+	 * The value of this object MUST be retained across reinitializations of
-+	 * the management system.
-+	 */
-+	ptptime_t base_time;
-+
-+	/* admin_control_list represent the AdminControlList/OperControlList.
-+	 * The administrative version of the gate control list for the Port.
-+	 */
-+	struct tsn_qbv_entry *control_list;
-+};
-+
-+struct tsn_qbv_conf {
-+	/* The GateEnabled parameter determines whether traffic scheduling is
-+	 * active (true) or inactive (false).  The value of this object MUST be
-+	 * retained across reinitializations of the management system.
-+	 */
-+	__u8 gate_enabled;
-+
-+	/* The maxsdu parameter denoting the maximum SDU size supported by the
-+	 * queue.
-+	 */
-+	__u32 maxsdu;
-+
-+	/* The ConfigChange parameter signals the start of a configuration
-+	 * change when it is set to TRUE. This should only be done when the
-+	 * various administrative parameters are all set to appropriate values.
-+	 */
-+	__u8 config_change;
-+
-+	/* The admin parameter signals the admin relate cycletime, basictime,
-+	 * gatelist paraters.
-+	 */
-+	struct tsn_qbv_basic admin;
-+};
-+
-+/* 802.1Qbv (Time Aware Shaper) port status */
-+struct tsn_qbv_status {
-+	/* The PTPtime at which the next config change is scheduled to occur.
-+	 * The value is a representation of a PTPtime value, consisting of a
-+	 * 48-bit integer number of seconds and a 32-bit integer number of
-+	 * nanoseconds.  The value of this object MUST be retained across
-+	 * reinitializations of the management system.
-+	 */
-+	ptptime_t config_change_time;
-+
-+	/* The granularity of the cycle time clock, represented as an unsigned
-+	 * number of tenths of nanoseconds.  The value of this object MUST be
-+	 * retained across reinitializations of the management system.
-+	 */
-+	__u32 tick_granularity;
-+
-+	/* The current time, in PTPtime, as maintained by the local system.
-+	 * The value is a representation of a PTPtime value, consisting of a
-+	 * 48-bit integer number of seconds and a 32-bit integer number of
-+	 * nanoseconds.
-+	 */
-+	ptptime_t  current_time;
-+
-+	/* The value of the ConfigPending state machine variable.  The value is
-+	 * TRUE if a configuration change is in progress but has not yet
-+	 * completed.
-+	 */
-+	__u8 config_pending;
-+
-+	/* A counter of the number of times that a re-configuration of the
-+	 * traffic schedule has been requested with the old schedule still
-+	 * running and the requested base time was in the past.
-+	 */
-+	__u64 config_change_error;
-+
-+	/* The maximum value supported by this Port of the
-+	 * AdminControlListLength and OperControlListLength parameters.
-+	 */
-+	__u32 supported_list_max;
-+
-+	/* Operation settings parameters and Oper gate list */
-+	struct tsn_qbv_basic oper;
-+};
-+
-+/* Time Specific Departure parameters */
-+struct tsn_tsd {
-+	__u8 enable;
-+
-+	/* The cycle time, in units of microsecond(us)*/
-+	__u32 period;
-+
-+	/* The maximum number of frames which could be transmitted on one cycle
-+	 *  The exceeding frames will be transmitted on next cycle.
-+	 */
-+	__u32 maxFrameNum;
-+
-+	/* Specify the time of the first cycle begins.
-+	 *      1:  begin when the queue get the first frame to transmit.
-+	 *      2:  begin immediately at the end of setting function.
-+	 */
-+	__u32 syn_flag;
-+};
-+
-+struct tsn_tsd_status {
-+	__u8 enable;
-+	__u32 period;
-+	__u32 maxFrameNum;
-+	__u32 flag;
-+	__u32 cycleNum;
-+	__u32 loss_steps;
-+};
-+
-+struct tsn_qos_switch_dscp_conf {
-+	__u8 trust;
-+	__u8 cos;
-+	__u8 dpl;
-+	__u8 remark;
-+	__u8 dscp; /* New ingress translated DSCP value */
-+};
-+
-+#endif /* _UAPI_GENL_TSN_H */
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -240,6 +240,7 @@ source "net/ieee802154/Kconfig"
- source "net/mac802154/Kconfig"
- source "net/sched/Kconfig"
- source "net/dcb/Kconfig"
-+source "net/tsn/Kconfig"
- source "net/dns_resolver/Kconfig"
- source "net/batman-adv/Kconfig"
- source "net/openvswitch/Kconfig"
---- a/net/Makefile
-+++ b/net/Makefile
-@@ -59,6 +59,9 @@ obj-$(CONFIG_CAIF)		+= caif/
- ifneq ($(CONFIG_DCB),)
- obj-y				+= dcb/
- endif
-+ifneq ($(CONFIG_TSN),)
-+obj-y 				+= tsn/
-+endif
- obj-$(CONFIG_6LOWPAN)		+= 6lowpan/
- obj-$(CONFIG_IEEE802154)	+= ieee802154/
- obj-$(CONFIG_MAC802154)		+= mac802154/
---- /dev/null
-+++ b/net/tsn/Kconfig
-@@ -0,0 +1,15 @@
-+config TSN
-+	bool "802.1 Time-Sensitive Networking support"
-+	default n
-+	depends on VLAN_8021Q && PTP_1588_CLOCK
-+	help
-+	  This enables support for TSN(time sensitive networking)
-+	  TSN features include:
-+		802.1Qav:
-+		802.1Qbv:
-+		802.1Qci:
-+		802.1Qbu:
-+		802.1AS:
-+		802.1CB:
-+
-+	  If unsure, say N.
---- /dev/null
-+++ b/net/tsn/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_TSN) += genl_tsn.o
---- /dev/null
-+++ b/net/tsn/genl_tsn.c
-@@ -0,0 +1,3696 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-+/* Copyright 2017-2019 NXP */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/netdevice.h>
-+#include <linux/if_vlan.h>
-+#include <net/genetlink.h>
-+#include <net/netlink.h>
-+#include <linux/version.h>
-+#include <net/tsn.h>
-+
-+#define NLA_PARSE_NESTED(a, b, c, d) \
-+	nla_parse_nested_deprecated(a, b, c, d, NULL)
-+#define NLA_PUT_U64(a, b, c) nla_put_u64_64bit(a, b, c, NLA_U64)
-+
-+static struct genl_family tsn_family;
-+
-+LIST_HEAD(port_list);
-+
-+static const struct nla_policy tsn_cmd_policy[TSN_CMD_ATTR_MAX + 1] = {
-+	[TSN_CMD_ATTR_MESG]		= { .type = NLA_STRING },
-+	[TSN_CMD_ATTR_DATA]		= { .type = NLA_S32 },
-+	[TSN_ATTR_IFNAME]		= { .type = NLA_STRING },
-+	[TSN_ATTR_PORT_NUMBER]		= { .type = NLA_U8 },
-+	[TSN_ATTR_CAP]			= { .type = NLA_NESTED	},
-+	[TSN_ATTR_QBV]			= { .type = NLA_NESTED },
-+	[TSN_ATTR_STREAM_IDENTIFY]	= { .type = NLA_NESTED },
-+	[TSN_ATTR_QCI_SP]		= { .type = NLA_NESTED },
-+	[TSN_ATTR_QCI_SFI]		= { .type = NLA_NESTED },
-+	[TSN_ATTR_QCI_SGI]		= { .type = NLA_NESTED },
-+	[TSN_ATTR_QCI_FMI]		= { .type = NLA_NESTED },
-+	[TSN_ATTR_CBS]			= { .type = NLA_NESTED },
-+	[TSN_ATTR_TSD]			= { .type = NLA_NESTED },
-+	[TSN_ATTR_QBU]			= { .type = NLA_NESTED },
-+	[TSN_ATTR_CT]			= { .type = NLA_NESTED },
-+	[TSN_ATTR_CBGEN]		= { .type = NLA_NESTED },
-+	[TSN_ATTR_CBREC]		= { .type = NLA_NESTED },
-+	[TSN_ATTR_CBSTAT]               = { .type = NLA_NESTED },
-+	[TSN_ATTR_DSCP]                 = { .type = NLA_NESTED },
-+};
-+
-+static const struct nla_policy tsn_cap_policy[TSN_CAP_ATTR_MAX + 1] = {
-+	[TSN_CAP_ATTR_QBV]		= { .type = NLA_FLAG },
-+	[TSN_CAP_ATTR_QCI]		= { .type = NLA_FLAG },
-+	[TSN_CAP_ATTR_QBU]		= { .type = NLA_FLAG },
-+	[TSN_CAP_ATTR_CBS]		= { .type = NLA_FLAG },
-+	[TSN_CAP_ATTR_CB]		= { .type = NLA_FLAG },
-+	[TSN_CAP_ATTR_TBS]		= { .type = NLA_FLAG },
-+	[TSN_CAP_ATTR_CTH]		= { .type = NLA_FLAG },
-+};
-+
-+static const struct nla_policy qci_cap_policy[TSN_QCI_STREAM_ATTR_MAX + 1] = {
-+	[TSN_QCI_STREAM_ATTR_MAX_SFI]	= { .type = NLA_U32 },
-+	[TSN_QCI_STREAM_ATTR_MAX_SGI]	= { .type = NLA_U32 },
-+	[TSN_QCI_STREAM_ATTR_MAX_FMI]	= { .type = NLA_U32 },
-+	[TSN_QCI_STREAM_ATTR_SLM]	= { .type = NLA_U32 },
-+};
-+
-+static const struct nla_policy ct_policy[TSN_CT_ATTR_MAX + 1] = {
-+	[TSN_CT_ATTR_QUEUE_STATE]	= { .type = NLA_U8 }
-+};
-+
-+static const struct nla_policy cbgen_policy[TSN_CBGEN_ATTR_MAX + 1] = {
-+	[TSN_CBGEN_ATTR_INDEX]		= { .type = NLA_U32 },
-+	[TSN_CBGEN_ATTR_PORT_MASK]	= { .type = NLA_U8 },
-+	[TSN_CBGEN_ATTR_SPLIT_MASK]	= { .type = NLA_U8 },
-+	[TSN_CBGEN_ATTR_SEQ_LEN]	= { .type = NLA_U8 },
-+	[TSN_CBGEN_ATTR_SEQ_NUM]	= { .type = NLA_U32 },
-+};
-+
-+static const struct nla_policy cbrec_policy[TSN_CBREC_ATTR_MAX + 1] = {
-+	[TSN_CBREC_ATTR_INDEX]		= { .type = NLA_U32 },
-+	[TSN_CBREC_ATTR_SEQ_LEN]	= { .type = NLA_U8 },
-+	[TSN_CBREC_ATTR_HIS_LEN]	= { .type = NLA_U8 },
-+	[TSN_CBREC_ATTR_TAG_POP_EN]	= { .type = NLA_FLAG },
-+};
-+
-+static const struct nla_policy cbstat_policy[TSN_CBSTAT_ATTR_MAX + 1] = {
-+	[TSN_CBSTAT_ATTR_INDEX]         = { .type = NLA_U32 },
-+	[TSN_CBSTAT_ATTR_GEN_REC]       = { .type = NLA_U8 },
-+	[TSN_CBSTAT_ATTR_ERR]		= { .type = NLA_U8 },
-+	[TSN_CBSTAT_ATTR_SEQ_NUM]       = { .type = NLA_U32 },
-+	[TSN_CBSTAT_ATTR_SEQ_LEN]       = { .type = NLA_U8 },
-+	[TSN_CBSTAT_ATTR_SPLIT_MASK]    = { .type = NLA_U8 },
-+	[TSN_CBSTAT_ATTR_PORT_MASK]	= { .type = NLA_U8 },
-+	[TSN_CBSTAT_ATTR_HIS_LEN]       = { .type = NLA_U8 },
-+	[TSN_CBSTAT_ATTR_SEQ_HIS]       = { .type = NLA_U32 },
-+};
-+
-+static const struct nla_policy qbu_policy[TSN_QBU_ATTR_MAX + 1] = {
-+	[TSN_QBU_ATTR_ADMIN_STATE]	= { .type = NLA_U8 },
-+	[TSN_QBU_ATTR_HOLD_ADVANCE]	= { .type = NLA_U32},
-+	[TSN_QBU_ATTR_RELEASE_ADVANCE]	= { .type = NLA_U32},
-+	[TSN_QBU_ATTR_ACTIVE]		= { .type = NLA_FLAG},
-+	[TSN_QBU_ATTR_HOLD_REQUEST]	= { .type = NLA_U8},
-+};
-+
-+static const struct nla_policy cbs_policy[TSN_CBS_ATTR_MAX + 1] = {
-+	[TSN_CBS_ATTR_TC_INDEX]		= { .type = NLA_U8},
-+	[TSN_CBS_ATTR_BW]		= { .type = NLA_U8},
-+};
-+
-+static const struct nla_policy tsd_policy[TSN_TSD_ATTR_MAX + 1] = {
-+	[TSN_TSD_ATTR_ENABLE]			= { .type = NLA_FLAG},
-+	[TSN_TSD_ATTR_DISABLE]			= { .type = NLA_FLAG},
-+	[TSN_TSD_ATTR_PERIOD]			= { .type = NLA_U32},
-+	[TSN_TSD_ATTR_MAX_FRM_NUM]		= { .type = NLA_U32},
-+	[TSN_TSD_ATTR_CYCLE_NUM]		= { .type = NLA_U32},
-+	[TSN_TSD_ATTR_LOSS_STEPS]		= { .type = NLA_U32},
-+	[TSN_TSD_ATTR_SYN_IMME]			= { .type = NLA_FLAG},
-+};
-+
-+static const struct nla_policy qbv_policy[TSN_QBV_ATTR_MAX + 1] = {
-+	[TSN_QBV_ATTR_ADMINENTRY]	= {	.type = NLA_NESTED},
-+	[TSN_QBV_ATTR_OPERENTRY]	= { .type = NLA_NESTED},
-+	[TSN_QBV_ATTR_ENABLE]		= { .type = NLA_FLAG},
-+	[TSN_QBV_ATTR_DISABLE]		= { .type = NLA_FLAG},
-+	[TSN_QBV_ATTR_CONFIGCHANGE]	= { .type = NLA_FLAG},
-+	[TSN_QBV_ATTR_CONFIGCHANGETIME]	= { .type = NLA_U64},
-+	[TSN_QBV_ATTR_MAXSDU]		= { .type = NLA_U32},
-+	[TSN_QBV_ATTR_GRANULARITY]	= { .type = NLA_U32},
-+	[TSN_QBV_ATTR_CURRENTTIME]	= { .type = NLA_U64},
-+	[TSN_QBV_ATTR_CONFIGPENDING]	= {.type = NLA_FLAG},
-+	[TSN_QBV_ATTR_CONFIGCHANGEERROR]	= { .type = NLA_U64},
-+	[TSN_QBV_ATTR_LISTMAX]		= { .type = NLA_U32},
-+};
-+
-+static const struct nla_policy qbv_ctrl_policy[TSN_QBV_ATTR_CTRL_MAX + 1] = {
-+	[TSN_QBV_ATTR_CTRL_LISTCOUNT]		= { .type = NLA_U32},
-+	[TSN_QBV_ATTR_CTRL_GATESTATE]		= { .type = NLA_U8},
-+	[TSN_QBV_ATTR_CTRL_CYCLETIME]		= { .type = NLA_U32},
-+	[TSN_QBV_ATTR_CTRL_CYCLETIMEEXT]	= { .type = NLA_U32},
-+	[TSN_QBV_ATTR_CTRL_BASETIME]		= { .type = NLA_U64},
-+	[TSN_QBV_ATTR_CTRL_LISTENTRY]		= { .type = NLA_NESTED},
-+};
-+
-+static const struct nla_policy qbv_entry_policy[TSN_QBV_ATTR_ENTRY_MAX + 1] = {
-+	[TSN_QBV_ATTR_ENTRY_ID]	= { .type = NLA_U32},
-+	[TSN_QBV_ATTR_ENTRY_GC]	= { .type = NLA_U8},
-+	[TSN_QBV_ATTR_ENTRY_TM]	= { .type = NLA_U32},
-+};
-+
-+static const struct nla_policy cb_streamid_policy[TSN_STREAMID_ATTR_MAX + 1] = {
-+	[TSN_STREAMID_ATTR_INDEX]	= { .type = NLA_U32},
-+	[TSN_STREAMID_ATTR_ENABLE]	= { .type = NLA_FLAG},
-+	[TSN_STREAMID_ATTR_DISABLE]	= { .type = NLA_FLAG},
-+	[TSN_STREAMID_ATTR_STREAM_HANDLE]	= { .type = NLA_S32},
-+	[TSN_STREAMID_ATTR_IFOP]	= { .type = NLA_U32},
-+	[TSN_STREAMID_ATTR_OFOP]	= { .type = NLA_U32},
-+	[TSN_STREAMID_ATTR_IFIP]	= { .type = NLA_U32},
-+	[TSN_STREAMID_ATTR_OFIP]	= { .type = NLA_U32},
-+	[TSN_STREAMID_ATTR_TYPE]	= { .type = NLA_U8},
-+	[TSN_STREAMID_ATTR_NDMAC]	= { .type = NLA_U64},
-+	[TSN_STREAMID_ATTR_NTAGGED]	= { .type = NLA_U8},
-+	[TSN_STREAMID_ATTR_NVID]	= { .type = NLA_U16},
-+	[TSN_STREAMID_ATTR_SMAC]	= { .type = NLA_U64},
-+	[TSN_STREAMID_ATTR_STAGGED]	= { .type = NLA_U8},
-+	[TSN_STREAMID_ATTR_SVID]	= { .type = NLA_U16},
-+	[TSN_STREAMID_ATTR_COUNTERS_PSI] = { .type = NLA_U64},
-+	[TSN_STREAMID_ATTR_COUNTERS_PSO] = { .type = NLA_U64},
-+	[TSN_STREAMID_ATTR_COUNTERS_PSPPI] = { .type = NLA_U64},
-+	[TSN_STREAMID_ATTR_COUNTERS_PSPPO] = { .type = NLA_U64},
-+};
-+
-+static const struct nla_policy qci_sfi_policy[TSN_QCI_SFI_ATTR_MAX + 1] = {
-+	[TSN_QCI_SFI_ATTR_INDEX]		= { .type = NLA_U32},
-+	[TSN_QCI_SFI_ATTR_ENABLE]		= { .type = NLA_FLAG},
-+	[TSN_QCI_SFI_ATTR_DISABLE]		= { .type = NLA_FLAG},
-+	[TSN_QCI_SFI_ATTR_STREAM_HANDLE]	= { .type = NLA_S32},
-+	[TSN_QCI_SFI_ATTR_PRIO_SPEC]		= { .type = NLA_S8},
-+	[TSN_QCI_SFI_ATTR_GATE_ID]		= { .type = NLA_U32},
-+	[TSN_QCI_SFI_ATTR_FILTER_TYPE]		= { .type = NLA_U8},
-+	[TSN_QCI_SFI_ATTR_FLOW_ID]		= { .type = NLA_S32},
-+	[TSN_QCI_SFI_ATTR_MAXSDU]		= { .type = NLA_U16},
-+	[TSN_QCI_SFI_ATTR_COUNTERS]		= {
-+		.len = sizeof(struct tsn_qci_psfp_sfi_counters)},
-+	[TSN_QCI_SFI_ATTR_OVERSIZE_ENABLE]	= { .type = NLA_FLAG},
-+	[TSN_QCI_SFI_ATTR_OVERSIZE]		= { .type = NLA_FLAG},
-+};
-+
-+static const struct nla_policy qci_sgi_policy[] = {
-+	[TSN_QCI_SGI_ATTR_INDEX]		= { .type = NLA_U32},
-+	[TSN_QCI_SGI_ATTR_ENABLE]		= { .type = NLA_FLAG},
-+	[TSN_QCI_SGI_ATTR_DISABLE]		= { .type = NLA_FLAG},
-+	[TSN_QCI_SGI_ATTR_CONFCHANGE]		= { .type = NLA_FLAG},
-+	[TSN_QCI_SGI_ATTR_IRXEN]		= { .type = NLA_FLAG},
-+	[TSN_QCI_SGI_ATTR_IRX]			= { .type = NLA_FLAG},
-+	[TSN_QCI_SGI_ATTR_OEXEN]		= { .type = NLA_FLAG},
-+	[TSN_QCI_SGI_ATTR_OEX]			= { .type = NLA_FLAG},
-+	[TSN_QCI_SGI_ATTR_ADMINENTRY]		= { .type = NLA_NESTED},
-+	[TSN_QCI_SGI_ATTR_OPERENTRY]		= { .type = NLA_NESTED},
-+	[TSN_QCI_SGI_ATTR_CCTIME]		= { .type = NLA_U64},
-+	[TSN_QCI_SGI_ATTR_TICKG]		= { .type = NLA_U32},
-+	[TSN_QCI_SGI_ATTR_CUTIME]		= { .type = NLA_U64},
-+	[TSN_QCI_SGI_ATTR_CPENDING]		= { .type = NLA_FLAG},
-+	[TSN_QCI_SGI_ATTR_CCERROR]		= { .type = NLA_U64},
-+};
-+
-+static const struct nla_policy qci_sgi_ctrl_policy[] = {
-+	[TSN_SGI_ATTR_CTRL_INITSTATE]		= { .type = NLA_FLAG},
-+	[TSN_SGI_ATTR_CTRL_LEN]			= { .type = NLA_U8},
-+	[TSN_SGI_ATTR_CTRL_CYTIME]		= { .type = NLA_U32},
-+	[TSN_SGI_ATTR_CTRL_CYTIMEEX]		= { .type = NLA_U32},
-+	[TSN_SGI_ATTR_CTRL_BTIME]		= { .type = NLA_U64},
-+	[TSN_SGI_ATTR_CTRL_INITIPV]		= { .type = NLA_S8},
-+	[TSN_SGI_ATTR_CTRL_GCLENTRY]		= { .type = NLA_NESTED},
-+};
-+
-+static const struct nla_policy qci_sgi_gcl_policy[] = {
-+	[TSN_SGI_ATTR_GCL_GATESTATE]		= { .type = NLA_FLAG},
-+	[TSN_SGI_ATTR_GCL_IPV]			= { .type = NLA_S8},
-+	[TSN_SGI_ATTR_GCL_INTERVAL]		= { .type = NLA_U32},
-+	[TSN_SGI_ATTR_GCL_OCTMAX]		= { .type = NLA_U32},
-+};
-+
-+static const struct nla_policy qci_fmi_policy[] = {
-+	[TSN_QCI_FMI_ATTR_INDEX]	= { .type = NLA_U32},
-+	[TSN_QCI_FMI_ATTR_ENABLE]	= { .type = NLA_FLAG},
-+	[TSN_QCI_FMI_ATTR_DISABLE]	= { .type = NLA_FLAG},
-+	[TSN_QCI_FMI_ATTR_CIR]		= { .type = NLA_U32},
-+	[TSN_QCI_FMI_ATTR_CBS]		= { .type = NLA_U32},
-+	[TSN_QCI_FMI_ATTR_EIR]		= { .type = NLA_U32},
-+	[TSN_QCI_FMI_ATTR_EBS]		= { .type = NLA_U32},
-+	[TSN_QCI_FMI_ATTR_CF]		= { .type = NLA_FLAG},
-+	[TSN_QCI_FMI_ATTR_CM]		= { .type = NLA_FLAG},
-+	[TSN_QCI_FMI_ATTR_DROPYL]	= { .type = NLA_FLAG},
-+	[TSN_QCI_FMI_ATTR_MAREDEN]	= { .type = NLA_FLAG},
-+	[TSN_QCI_FMI_ATTR_MARED]	= { .type = NLA_FLAG},
-+	[TSN_QCI_FMI_ATTR_COUNTERS]	= {
-+		.len = sizeof(struct tsn_qci_psfp_fmi_counters)},
-+};
-+
-+static const struct nla_policy dscp_policy[] = {
-+	[TSN_DSCP_ATTR_INDEX]		= { .type = NLA_U32},
-+	[TSN_DSCP_ATTR_DISABLE]		= { .type = NLA_FLAG},
-+	[TSN_DSCP_ATTR_COS]		= { .type = NLA_U8},
-+	[TSN_DSCP_ATTR_DPL]		= { .type = NLA_U8},
-+};
-+
-+static ATOMIC_NOTIFIER_HEAD(tsn_notif_chain);
-+
-+/**
-+ *	register_tsn_notifier - Register notifier
-+ *	@nb: notifier_block
-+ *
-+ *	Register switch device notifier.
-+ */
-+int register_tsn_notifier(struct notifier_block *nb)
-+{
-+	return atomic_notifier_chain_register(&tsn_notif_chain, nb);
-+}
-+EXPORT_SYMBOL_GPL(register_tsn_notifier);
-+
-+/**
-+ *	unregister_tsn_notifier - Unregister notifier
-+ *	@nb: notifier_block
-+ *
-+ *	Unregister switch device notifier.
-+ */
-+int unregister_tsn_notifier(struct notifier_block *nb)
-+{
-+	return atomic_notifier_chain_unregister(&tsn_notif_chain, nb);
-+}
-+EXPORT_SYMBOL_GPL(unregister_tsn_notifier);
-+
-+/**
-+ *	call_tsn_notifiers - Call notifiers
-+ *	@val: value passed unmodified to notifier function
-+ *	@dev: port device
-+ *	@info: notifier information data
-+ *
-+ *	Call all network notifier blocks.
-+ */
-+int call_tsn_notifiers(unsigned long val, struct net_device *dev,
-+		       struct tsn_notifier_info *info)
-+{
-+	info->dev = dev;
-+	return atomic_notifier_call_chain(&tsn_notif_chain, val, info);
-+}
-+EXPORT_SYMBOL_GPL(call_tsn_notifiers);
-+
-+struct tsn_port *tsn_get_port(struct net_device *ndev)
-+{
-+	struct tsn_port *port;
-+	bool tsn_found = false;
-+
-+	list_for_each_entry(port, &port_list, list) {
-+		if (port->netdev == ndev) {
-+			tsn_found = true;
-+			break;
-+		}
-+	}
-+
-+	if (!tsn_found)
-+		return NULL;
-+
-+	return port;
-+}
-+EXPORT_SYMBOL_GPL(tsn_get_port);
-+
-+static int tsn_prepare_reply(struct genl_info *info, u8 cmd,
-+			     struct sk_buff **skbp, size_t size)
-+{
-+	struct sk_buff *skb;
-+	void *reply;
-+
-+	/* If new attributes are added, please revisit this allocation
-+	 */
-+	skb = genlmsg_new(size, GFP_KERNEL);
-+	if (!skb)
-+		return -ENOMEM;
-+
-+	if (!info) {
-+		nlmsg_free(skb);
-+		return -EINVAL;
-+	}
-+
-+	reply = genlmsg_put_reply(skb, info, &tsn_family, 0, cmd);
-+	if (!reply) {
-+		nlmsg_free(skb);
-+		return -EINVAL;
-+	}
-+
-+	*skbp = skb;
-+	return 0;
-+}
-+
-+static int tsn_mk_reply(struct sk_buff *skb, int aggr, void *data, int len)
-+{
-+    /* add a netlink attribute to a socket buffer */
-+	return nla_put(skb, aggr, len, data);
-+}
-+
-+static int tsn_send_reply(struct sk_buff *skb, struct genl_info *info)
-+{
-+	struct genlmsghdr *genlhdr = nlmsg_data(nlmsg_hdr(skb));
-+	void *reply = genlmsg_data(genlhdr);
-+
-+	genlmsg_end(skb, reply);
-+
-+	return genlmsg_reply(skb, info);
-+}
-+
-+static int cmd_attr_echo_message(struct genl_info *info)
-+{
-+	struct nlattr *na;
-+	char *msg;
-+	struct sk_buff *rep_skb;
-+	size_t size;
-+	int ret;
-+
-+	na = info->attrs[TSN_CMD_ATTR_MESG];
-+	if (!na)
-+		return -EINVAL;
-+
-+	msg = (char *)nla_data(na);
-+	pr_info("tsn generic netlink receive echo mesg %s\n", msg);
-+
-+	size = nla_total_size(strlen(msg) + 1);
-+
-+	ret = tsn_prepare_reply(info, TSN_CMD_REPLY, &rep_skb,
-+				size + NLMSG_ALIGN(MAX_USER_SIZE));
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = tsn_mk_reply(rep_skb, TSN_CMD_ATTR_MESG, msg, size);
-+	if (ret < 0)
-+		goto err;
-+
-+	return tsn_send_reply(rep_skb, info);
-+
-+err:
-+	nlmsg_free(rep_skb);
-+	return ret;
-+}
-+
-+static int cmd_attr_echo_data(struct genl_info *info)
-+{
-+	struct nlattr *na;
-+	s32	data;
-+	struct sk_buff *rep_skb;
-+	size_t size;
-+	int ret;
-+
-+	/*read data */
-+	na = info->attrs[TSN_CMD_ATTR_DATA];
-+	if (!na)
-+		return -EINVAL;
-+
-+	data = nla_get_s32(info->attrs[TSN_CMD_ATTR_DATA]);
-+	pr_info("tsn generic netlink receive echo data %d\n", data);
-+
-+	/* send back */
-+	size = nla_total_size(sizeof(s32));
-+
-+	ret = tsn_prepare_reply(info, TSN_CMD_REPLY, &rep_skb,
-+				size + NLMSG_ALIGN(MAX_USER_SIZE));
-+	if (ret < 0)
-+		return ret;
-+
-+	/* netlink lib func */
-+	ret = nla_put_s32(rep_skb, TSN_CMD_ATTR_DATA, data);
-+	if (ret < 0)
-+		goto err;
-+
-+	return tsn_send_reply(rep_skb, info);
-+
-+err:
-+	nlmsg_free(rep_skb);
-+	return ret;
-+}
-+
-+static int tsn_echo_cmd(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_CMD_ATTR_MESG])
-+		return cmd_attr_echo_message(info);
-+	else if (info->attrs[TSN_CMD_ATTR_DATA])
-+		return cmd_attr_echo_data(info);
-+
-+	return -EINVAL;
-+}
-+
-+static int tsn_simple_reply(struct genl_info *info, u32 cmd,
-+			    char *portname, s32 retvalue)
-+{
-+	struct sk_buff *rep_skb;
-+	size_t size;
-+	int ret;
-+
-+	/* send back */
-+	size = nla_total_size(strlen(portname) + 1);
-+	size += nla_total_size(sizeof(s32));
-+
-+	ret = tsn_prepare_reply(info, cmd,
-+				&rep_skb, size + NLMSG_ALIGN(MAX_USER_SIZE));
-+	if (ret < 0)
-+		return ret;
-+
-+	/* netlink lib func */
-+	ret = nla_put_string(rep_skb, TSN_ATTR_IFNAME, portname);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = nla_put_s32(rep_skb, TSN_CMD_ATTR_DATA, retvalue);
-+	if (ret < 0)
-+		return ret;
-+
-+	return tsn_send_reply(rep_skb, info);
-+}
-+
-+struct tsn_port *tsn_init_check(struct genl_info *info,
-+				struct net_device **ndev)
-+{
-+	struct nlattr *na;
-+	char *portname;
-+	struct net_device *netdev;
-+	struct tsn_port *port;
-+	bool tsn_found = false;
-+
-+	if (!info->attrs[TSN_ATTR_IFNAME]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 "no portname", -EINVAL);
-+		return NULL;
-+	}
-+
-+	na = info->attrs[TSN_ATTR_IFNAME];
-+
-+	portname = (char *)nla_data(na);
-+
-+	netdev = __dev_get_by_name(genl_info_net(info), portname);
-+	if (!netdev) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 "error device", -ENODEV);
-+		return NULL;
-+	}
-+
-+	list_for_each_entry(port, &port_list, list) {
-+		if (port->netdev == netdev) {
-+			tsn_found = true;
-+			break;
-+		}
-+	}
-+
-+	if (!tsn_found) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -ENODEV);
-+		return NULL;
-+	}
-+
-+	*ndev = netdev;
-+
-+	return port;
-+}
-+
-+static int tsn_cap_get(struct sk_buff *skb, struct genl_info *info)
-+{
-+	struct sk_buff *rep_skb;
-+	struct nlattr *tsn_cap_attr;
-+	int ret;
-+	u32 cap = 0;
-+	struct net_device *netdev;
-+	struct genlmsghdr *genlhdr;
-+	const struct tsn_ops *tsnops;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port) {
-+		ret = -ENODEV;
-+		goto out;
-+	}
-+
-+	tsnops = port->tsnops;
-+	genlhdr = info->genlhdr;
-+	if (!tsnops->get_capability) {
-+		ret = -EOPNOTSUPP;
-+		goto out;
-+	}
-+
-+	cap = tsnops->get_capability(netdev);
-+	if (cap < 0) {
-+		ret = cap;
-+		goto out;
-+	}
-+
-+	/* Pad netlink reply data */
-+	ret = tsn_prepare_reply(info, genlhdr->cmd,
-+				&rep_skb, NLMSG_ALIGN(MAX_ATTR_SIZE));
-+	if (ret < 0)
-+		goto out;
-+
-+	if (nla_put_string(rep_skb, TSN_ATTR_IFNAME, netdev->name)) {
-+		ret = -EMSGSIZE;
-+		goto err;
-+	}
-+
-+	tsn_cap_attr = nla_nest_start_noflag(rep_skb, TSN_ATTR_CAP);
-+	if (!tsn_cap_attr) {
-+		ret = -EMSGSIZE;
-+		goto err;
-+	}
-+
-+	if (cap & TSN_CAP_QBV) {
-+		if (nla_put_flag(rep_skb, TSN_CAP_ATTR_QBV))
-+			goto err;
-+	}
-+
-+	if (cap & TSN_CAP_QCI) {
-+		if (nla_put_flag(rep_skb, TSN_CAP_ATTR_QCI))
-+			goto err;
-+	}
-+
-+	if (cap & TSN_CAP_QBU) {
-+		if (nla_put_flag(rep_skb, TSN_CAP_ATTR_QBU))
-+			goto err;
-+	}
-+
-+	if (cap & TSN_CAP_CBS) {
-+		if (nla_put_flag(rep_skb, TSN_CAP_ATTR_CBS))
-+			goto err;
-+	}
-+
-+	if (cap & TSN_CAP_CB) {
-+		if (nla_put_flag(rep_skb, TSN_CAP_ATTR_CB))
-+			goto err;
-+	}
-+
-+	if (cap & TSN_CAP_TBS) {
-+		if (nla_put_flag(rep_skb, TSN_CAP_ATTR_TBS))
-+			goto err;
-+	}
-+
-+	if (cap & TSN_CAP_CTH) {
-+		if (nla_put_flag(rep_skb, TSN_CAP_ATTR_CTH))
-+			goto err;
-+	}
-+
-+	nla_nest_end(rep_skb, tsn_cap_attr);
-+
-+	tsn_send_reply(rep_skb, info);
-+	return 0;
-+err:
-+	nlmsg_free(rep_skb);
-+out:
-+	if (ret < 0)
-+		tsn_simple_reply(info, TSN_CMD_REPLY, netdev->name, ret);
-+	return ret;
-+}
-+
-+static int cmd_cb_streamid_set(struct genl_info *info)
-+{
-+	struct nlattr *na, *sid[TSN_STREAMID_ATTR_MAX + 1];
-+	u32 sid_index;
-+	u8 iden_type = 1;
-+	bool enable;
-+	int ret;
-+	struct net_device *netdev;
-+	struct tsn_cb_streamid sidconf;
-+	const struct tsn_ops *tsnops;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	memset(&sidconf, 0, sizeof(struct tsn_cb_streamid));
-+
-+	if (!info->attrs[TSN_ATTR_STREAM_IDENTIFY])
-+		return -EINVAL;
-+
-+	na = info->attrs[TSN_ATTR_STREAM_IDENTIFY];
-+
-+	ret = NLA_PARSE_NESTED(sid, TSN_STREAMID_ATTR_MAX,
-+			       na, cb_streamid_policy);
-+	if (ret)
-+		return -EINVAL;
-+
-+	if (!sid[TSN_STREAMID_ATTR_INDEX])
-+		return -EINVAL;
-+
-+	sid_index = nla_get_u32(sid[TSN_STREAMID_ATTR_INDEX]);
-+
-+	if (sid[TSN_STREAMID_ATTR_ENABLE])
-+		enable = true;
-+	else if (sid[TSN_STREAMID_ATTR_DISABLE])
-+		enable = false;
-+	else
-+		return -EINVAL;
-+
-+	if (!enable)
-+		goto loaddev;
-+
-+	if (sid[TSN_STREAMID_ATTR_TYPE])
-+		iden_type = nla_get_u8(sid[TSN_STREAMID_ATTR_TYPE]);
-+	else
-+		return -EINVAL;
-+
-+	sidconf.type = iden_type;
-+	switch (iden_type) {
-+	case STREAMID_NULL:
-+		if (!sid[TSN_STREAMID_ATTR_NDMAC] ||
-+		    !sid[TSN_STREAMID_ATTR_NTAGGED] ||
-+		    !sid[TSN_STREAMID_ATTR_NVID]) {
-+			return -EINVAL;
-+		}
-+
-+		sidconf.para.nid.dmac =
-+			nla_get_u64(sid[TSN_STREAMID_ATTR_NDMAC]);
-+		sidconf.para.nid.tagged =
-+			nla_get_u8(sid[TSN_STREAMID_ATTR_NTAGGED]);
-+		sidconf.para.nid.vid =
-+			nla_get_u16(sid[TSN_STREAMID_ATTR_NVID]);
-+		break;
-+	case STREAMID_SMAC_VLAN:
-+		/* TODO: not supportted yet */
-+		if (!sid[TSN_STREAMID_ATTR_SMAC] ||
-+		    !sid[TSN_STREAMID_ATTR_STAGGED] ||
-+		    !sid[TSN_STREAMID_ATTR_SVID]) {
-+			return -EINVAL;
-+		}
-+
-+		sidconf.para.sid.smac =
-+			nla_get_u64(sid[TSN_STREAMID_ATTR_SMAC]);
-+		sidconf.para.sid.tagged =
-+			nla_get_u8(sid[TSN_STREAMID_ATTR_STAGGED]);
-+		sidconf.para.sid.vid =
-+			nla_get_u16(sid[TSN_STREAMID_ATTR_SVID]);
-+		break;
-+	case STREAMID_DMAC_VLAN:
-+
-+	case STREAMID_IP:
-+
-+	default:
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	if (sid[TSN_STREAMID_ATTR_STREAM_HANDLE])
-+		sidconf.handle =
-+			nla_get_s32(sid[TSN_STREAMID_ATTR_STREAM_HANDLE]);
-+
-+	if (sid[TSN_STREAMID_ATTR_IFOP])
-+		sidconf.ifac_oport = nla_get_u32(sid[TSN_STREAMID_ATTR_IFOP]);
-+	if (sid[TSN_STREAMID_ATTR_OFOP])
-+		sidconf.ofac_oport = nla_get_u32(sid[TSN_STREAMID_ATTR_OFOP]);
-+	if (sid[TSN_STREAMID_ATTR_IFIP])
-+		sidconf.ifac_iport = nla_get_u32(sid[TSN_STREAMID_ATTR_IFIP]);
-+	if (sid[TSN_STREAMID_ATTR_OFIP])
-+		sidconf.ofac_iport = nla_get_u32(sid[TSN_STREAMID_ATTR_OFIP]);
-+
-+loaddev:
-+	if (!tsnops->cb_streamid_set) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -EOPNOTSUPP;
-+	}
-+
-+	ret = tsnops->cb_streamid_set(netdev, sid_index, enable, &sidconf);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY, netdev->name, ret);
-+		return ret;
-+	}
-+
-+	/* simple reply here. To be continue */
-+	if (tsn_simple_reply(info, TSN_CMD_REPLY, netdev->name, 0))
-+		return -1;
-+
-+	return 0;
-+}
-+
-+static int tsn_cb_streamid_set(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME]) {
-+		cmd_cb_streamid_set(info);
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+static int cmd_cb_streamid_get(struct genl_info *info)
-+{
-+	struct nlattr *na, *sidattr, *sid[TSN_STREAMID_ATTR_MAX + 1];
-+	u32 sid_index;
-+	struct genlmsghdr *genlhdr;
-+	struct sk_buff *rep_skb;
-+	int ret, i;
-+	int valid;
-+	struct net_device *netdev;
-+	struct tsn_cb_streamid sidconf;
-+	struct tsn_cb_streamid_counters sidcounts;
-+	const struct tsn_ops *tsnops;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	memset(&sidconf, 0, sizeof(struct tsn_cb_streamid));
-+	memset(&sidcounts, 0, sizeof(struct tsn_cb_streamid_counters));
-+
-+	if (!info->attrs[TSN_ATTR_STREAM_IDENTIFY])
-+		return -EINVAL;
-+
-+	na = info->attrs[TSN_ATTR_STREAM_IDENTIFY];
-+
-+	ret = NLA_PARSE_NESTED(sid, TSN_STREAMID_ATTR_MAX,
-+			       na, cb_streamid_policy);
-+	if (ret)
-+		return -EINVAL;
-+
-+	if (!sid[TSN_STREAMID_ATTR_INDEX])
-+		return -EINVAL;
-+
-+	sid_index = nla_get_u32(sid[TSN_STREAMID_ATTR_INDEX]);
-+
-+	if (!tsnops->cb_streamid_get) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		ret = -EINVAL;
-+		goto exit;
-+	} else {
-+		valid = tsnops->cb_streamid_get(netdev, sid_index, &sidconf);
-+		if (valid < 0) {
-+			tsn_simple_reply(info, TSN_CMD_REPLY,
-+					 netdev->name, valid);
-+			return valid;
-+		}
-+	}
-+
-+	/* send back */
-+	genlhdr = info->genlhdr;
-+	ret = tsn_prepare_reply(info, genlhdr->cmd, &rep_skb,
-+				NLMSG_ALIGN(MAX_ATTR_SIZE));
-+	if (ret < 0)
-+		return ret;
-+
-+	/* input netlink the parameters */
-+	sidattr = nla_nest_start_noflag(rep_skb, TSN_ATTR_STREAM_IDENTIFY);
-+	if (!sidattr) {
-+		ret = -EINVAL;
-+		goto err;
-+	}
-+
-+	if (nla_put_u32(rep_skb, TSN_STREAMID_ATTR_INDEX, sid_index))
-+		return -EMSGSIZE;
-+
-+	if (valid == 1) {
-+		nla_put_flag(rep_skb, TSN_STREAMID_ATTR_ENABLE);
-+	} else if (valid == 0) {
-+		nla_put_flag(rep_skb, TSN_STREAMID_ATTR_DISABLE);
-+	} else {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		goto err;
-+	}
-+
-+	if (nla_put_s32(rep_skb,
-+			TSN_STREAMID_ATTR_STREAM_HANDLE, sidconf.handle) ||
-+	    nla_put_u32(rep_skb, TSN_STREAMID_ATTR_IFOP, sidconf.ifac_oport) ||
-+	    nla_put_u32(rep_skb, TSN_STREAMID_ATTR_OFOP, sidconf.ofac_oport) ||
-+	    nla_put_u32(rep_skb, TSN_STREAMID_ATTR_IFIP, sidconf.ifac_iport) ||
-+	    nla_put_u32(rep_skb, TSN_STREAMID_ATTR_OFIP, sidconf.ofac_iport) ||
-+	    nla_put_u8(rep_skb, TSN_STREAMID_ATTR_TYPE, sidconf.type))
-+		return -EMSGSIZE;
-+
-+	switch (sidconf.type) {
-+	case STREAMID_NULL:
-+		if (NLA_PUT_U64(rep_skb, TSN_STREAMID_ATTR_NDMAC,
-+				sidconf.para.nid.dmac) ||
-+		    nla_put_u16(rep_skb, TSN_STREAMID_ATTR_NVID,
-+				sidconf.para.nid.vid) ||
-+		    nla_put_u8(rep_skb, TSN_STREAMID_ATTR_NTAGGED,
-+			       sidconf.para.nid.tagged))
-+			return -EMSGSIZE;
-+		break;
-+	case STREAMID_SMAC_VLAN:
-+		if (NLA_PUT_U64(rep_skb, TSN_STREAMID_ATTR_SMAC,
-+				sidconf.para.sid.smac) ||
-+		    nla_put_u16(rep_skb, TSN_STREAMID_ATTR_SVID,
-+				sidconf.para.sid.vid) ||
-+		    nla_put_u8(rep_skb, TSN_STREAMID_ATTR_STAGGED,
-+			       sidconf.para.sid.tagged))
-+			return -EMSGSIZE;
-+		break;
-+	case STREAMID_DMAC_VLAN:
-+	case STREAMID_IP:
-+	default:
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		goto err;
-+	}
-+
-+	if (!tsnops->cb_streamid_counters_get) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		goto err;
-+	} else {
-+		ret = tsnops->cb_streamid_counters_get(netdev,
-+							sid_index,
-+							&sidcounts);
-+		if (ret < 0) {
-+			tsn_simple_reply(info, TSN_CMD_REPLY,
-+					 netdev->name, ret);
-+			goto err;
-+		}
-+	}
-+
-+	if (NLA_PUT_U64(rep_skb, TSN_STREAMID_ATTR_COUNTERS_PSI,
-+			sidcounts.per_stream.input) ||
-+	    NLA_PUT_U64(rep_skb, TSN_STREAMID_ATTR_COUNTERS_PSO,
-+			sidcounts.per_stream.output))
-+		return -EMSGSIZE;
-+
-+	for (i = 0; i < 32; i++) {
-+		if (NLA_PUT_U64(rep_skb, TSN_STREAMID_ATTR_COUNTERS_PSPPI,
-+				sidcounts.per_streamport[i].input) ||
-+		    NLA_PUT_U64(rep_skb, TSN_STREAMID_ATTR_COUNTERS_PSPPO,
-+				sidcounts.per_streamport[i].output))
-+			return -EMSGSIZE;
-+	}
-+
-+	nla_nest_end(rep_skb, sidattr);
-+	/* end netlink input the parameters */
-+
-+	/* netlink lib func */
-+	ret = nla_put_string(rep_skb, TSN_ATTR_IFNAME, netdev->name);
-+	if (ret < 0)
-+		goto err;
-+
-+	ret = nla_put_s32(rep_skb, TSN_CMD_ATTR_DATA, 0);
-+	if (ret < 0)
-+		goto err;
-+
-+	return tsn_send_reply(rep_skb, info);
-+
-+err:
-+	nlmsg_free(rep_skb);
-+exit:
-+	return ret;
-+}
-+
-+static int tsn_cb_streamid_get(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME]) {
-+		cmd_cb_streamid_get(info);
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+static int cmb_cb_streamid_counters_get(struct genl_info *info)
-+{
-+	return 0;
-+}
-+
-+static int tsn_cb_streamid_counters_get(struct sk_buff *skb,
-+					struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME]) {
-+		cmb_cb_streamid_counters_get(info);
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+static int tsn_qci_cap_get(struct sk_buff *skb, struct genl_info *info)
-+{
-+	struct nlattr *qci_cap;
-+	struct sk_buff *rep_skb;
-+	int ret;
-+	struct net_device *netdev;
-+	struct genlmsghdr *genlhdr;
-+	struct tsn_qci_psfp_stream_param qci_cap_status;
-+	const struct tsn_ops *tsnops;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port) {
-+		ret = -EINVAL;
-+		goto out;
-+	}
-+
-+	tsnops = port->tsnops;
-+
-+	genlhdr = info->genlhdr;
-+
-+	memset(&qci_cap_status, 0, sizeof(qci_cap_status));
-+
-+	if (!tsnops->qci_get_maxcap) {
-+		ret = -EOPNOTSUPP;
-+		goto out;
-+	}
-+
-+	ret = tsnops->qci_get_maxcap(netdev, &qci_cap_status);
-+	if (ret < 0)
-+		goto out;
-+
-+	/* Pad netlink reply data */
-+	ret = tsn_prepare_reply(info, genlhdr->cmd,
-+				&rep_skb, NLMSG_ALIGN(MAX_ATTR_SIZE));
-+	if (ret < 0)
-+		goto out;
-+
-+	if (nla_put_string(rep_skb, TSN_ATTR_IFNAME, netdev->name)) {
-+		ret = -EMSGSIZE;
-+		goto err;
-+	}
-+
-+	qci_cap = nla_nest_start_noflag(rep_skb, TSN_ATTR_QCI_SP);
-+	if (!qci_cap) {
-+		ret = -EMSGSIZE;
-+		goto err;
-+	}
-+
-+	if (nla_put_u32(rep_skb, TSN_QCI_STREAM_ATTR_MAX_SFI,
-+			qci_cap_status.max_sf_instance) ||
-+		nla_put_u32(rep_skb, TSN_QCI_STREAM_ATTR_MAX_SGI,
-+			    qci_cap_status.max_sg_instance) ||
-+		nla_put_u32(rep_skb, TSN_QCI_STREAM_ATTR_MAX_FMI,
-+			    qci_cap_status.max_fm_instance) ||
-+		nla_put_u32(rep_skb, TSN_QCI_STREAM_ATTR_SLM,
-+			    qci_cap_status.supported_list_max)) {
-+		ret = -EMSGSIZE;
-+		goto err;
-+	}
-+
-+	nla_nest_end(rep_skb, qci_cap);
-+
-+	tsn_send_reply(rep_skb, info);
-+
-+	return 0;
-+err:
-+	nlmsg_free(rep_skb);
-+out:
-+	if (ret < 0)
-+		tsn_simple_reply(info, TSN_CMD_REPLY, netdev->name, ret);
-+
-+	return ret;
-+}
-+
-+static int cmd_qci_sfi_set(struct genl_info *info)
-+{
-+	struct nlattr *na, *sfi[TSN_QCI_SFI_ATTR_MAX + 1];
-+	u32 sfi_handle;
-+	bool enable;
-+	int ret;
-+	struct net_device *netdev;
-+	struct tsn_qci_psfp_sfi_conf sficonf;
-+	const struct tsn_ops *tsnops;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	memset(&sficonf, 0, sizeof(struct tsn_qci_psfp_sfi_conf));
-+
-+	if (!info->attrs[TSN_ATTR_QCI_SFI])
-+		return -EINVAL;
-+
-+	na = info->attrs[TSN_ATTR_QCI_SFI];
-+
-+	ret = NLA_PARSE_NESTED(sfi, TSN_QCI_SFI_ATTR_MAX, na, qci_sfi_policy);
-+	if (ret) {
-+		pr_info("tsn: parse value TSN_QCI_SFI_ATTR_MAX  error.");
-+		return -EINVAL;
-+	}
-+
-+	if (!sfi[TSN_QCI_SFI_ATTR_INDEX])
-+		return -EINVAL;
-+
-+	sfi_handle = nla_get_u32(sfi[TSN_QCI_SFI_ATTR_INDEX]);
-+
-+	if (sfi[TSN_QCI_SFI_ATTR_ENABLE]) {
-+		enable = true;
-+	} else if (sfi[TSN_QCI_SFI_ATTR_DISABLE]) {
-+		enable = false;
-+		goto loaddrive;
-+	} else {
-+		pr_err("tsn: must provde ENABLE or DISABLE attribute.\n");
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	if (!sfi[TSN_QCI_SFI_ATTR_GATE_ID]) {
-+		pr_err("tsn: must provide stream gate index\n");
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	if (!sfi[TSN_QCI_SFI_ATTR_STREAM_HANDLE])
-+		sficonf.stream_handle_spec = -1;
-+	else
-+		sficonf.stream_handle_spec =
-+			nla_get_s32(sfi[TSN_QCI_SFI_ATTR_STREAM_HANDLE]);
-+
-+	if (!sfi[TSN_QCI_SFI_ATTR_PRIO_SPEC])
-+		sficonf.priority_spec = -1;
-+	else
-+		sficonf.priority_spec =
-+			nla_get_s8(sfi[TSN_QCI_SFI_ATTR_PRIO_SPEC]);
-+
-+	sficonf.stream_gate_instance_id =
-+			nla_get_u32(sfi[TSN_QCI_SFI_ATTR_GATE_ID]);
-+
-+	if (sfi[TSN_QCI_SFI_ATTR_MAXSDU])
-+		sficonf.stream_filter.maximum_sdu_size =
-+			nla_get_u16(sfi[TSN_QCI_SFI_ATTR_MAXSDU]);
-+	else
-+		sficonf.stream_filter.maximum_sdu_size = 0;
-+
-+	if (sfi[TSN_QCI_SFI_ATTR_FLOW_ID])
-+		sficonf.stream_filter.flow_meter_instance_id =
-+			nla_get_s32(sfi[TSN_QCI_SFI_ATTR_FLOW_ID]);
-+	else
-+		sficonf.stream_filter.flow_meter_instance_id = -1;
-+
-+	if (sfi[TSN_QCI_SFI_ATTR_OVERSIZE_ENABLE])
-+		sficonf.block_oversize_enable = true;
-+
-+	if (sfi[TSN_QCI_SFI_ATTR_OVERSIZE])
-+		sficonf.block_oversize = true;
-+
-+loaddrive:
-+	if (!tsnops->qci_sfi_set) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -EINVAL;
-+	}
-+
-+	ret = tsnops->qci_sfi_set(netdev, sfi_handle, enable, &sficonf);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY, netdev->name, ret);
-+		return ret;
-+	}
-+
-+	ret = tsn_simple_reply(info, TSN_CMD_REPLY, netdev->name, 0);
-+
-+	if (ret)
-+		return ret;
-+	return 0;
-+}
-+
-+static int tsn_qci_sfi_set(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME]) {
-+		cmd_qci_sfi_set(info);
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+static int cmd_qci_sfi_get(struct genl_info *info)
-+{
-+	struct nlattr *na, *sfiattr;
-+	struct nlattr *sfi[TSN_QCI_SFI_ATTR_MAX + 1];
-+	u32 sfi_handle;
-+	struct sk_buff *rep_skb;
-+	int ret, valid = 0;
-+	struct net_device *netdev;
-+	struct genlmsghdr *genlhdr;
-+	struct tsn_qci_psfp_sfi_conf sficonf;
-+	struct tsn_qci_psfp_sfi_counters sficount;
-+	const struct tsn_ops *tsnops;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	genlhdr = info->genlhdr;
-+
-+	if (!info->attrs[TSN_ATTR_QCI_SFI])
-+		return -EINVAL;
-+
-+	na = info->attrs[TSN_ATTR_QCI_SFI];
-+
-+	ret = NLA_PARSE_NESTED(sfi, TSN_QCI_SFI_ATTR_MAX,
-+			       na, qci_sfi_policy);
-+	if (ret)
-+		return -EINVAL;
-+
-+	if (!sfi[TSN_QCI_SFI_ATTR_INDEX])
-+		return -EINVAL;
-+
-+	sfi_handle = nla_get_u32(sfi[TSN_QCI_SFI_ATTR_INDEX]);
-+
-+	memset(&sficonf, 0, sizeof(struct tsn_qci_psfp_sfi_conf));
-+	memset(&sficount, 0, sizeof(struct tsn_qci_psfp_sfi_counters));
-+
-+	if (!tsnops->qci_sfi_get || !tsnops->qci_sfi_counters_get) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		ret = -EINVAL;
-+		goto exit;
-+	} else {
-+		valid = tsnops->qci_sfi_get(netdev, sfi_handle, &sficonf);
-+		if (valid < 0) {
-+			tsn_simple_reply(info, TSN_CMD_REPLY,
-+					 netdev->name, valid);
-+			return valid;
-+		}
-+
-+		valid = tsnops->qci_sfi_counters_get(netdev, sfi_handle,
-+						     &sficount);
-+		if (valid < 0) {
-+			tsn_simple_reply(info, TSN_CMD_REPLY,
-+					 netdev->name, valid);
-+			return valid;
-+		}
-+	}
-+
-+	ret = tsn_prepare_reply(info, genlhdr->cmd,
-+				&rep_skb, NLMSG_ALIGN(MAX_ATTR_SIZE));
-+	if (ret < 0)
-+		return ret;
-+
-+	if (nla_put_string(rep_skb, TSN_ATTR_IFNAME, netdev->name))
-+		goto err;
-+
-+	sfiattr = nla_nest_start_noflag(rep_skb, TSN_ATTR_QCI_SFI);
-+	if (!sfiattr) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		ret = -EINVAL;
-+		goto err;
-+	}
-+
-+	if (nla_put_u32(rep_skb, TSN_QCI_SFI_ATTR_INDEX, sfi_handle))
-+		return -EMSGSIZE;
-+
-+	if (valid) {
-+		if (nla_put_flag(rep_skb, TSN_QCI_SFI_ATTR_ENABLE))
-+			return -EMSGSIZE;
-+	} else {
-+		if (nla_put_flag(rep_skb, TSN_QCI_SFI_ATTR_DISABLE))
-+			return -EMSGSIZE;
-+	}
-+
-+	if (nla_put_s32(rep_skb, TSN_QCI_SFI_ATTR_STREAM_HANDLE,
-+			sficonf.stream_handle_spec) ||
-+	    nla_put_s8(rep_skb, TSN_QCI_SFI_ATTR_PRIO_SPEC,
-+		       sficonf.priority_spec) ||
-+	    nla_put_u32(rep_skb, TSN_QCI_SFI_ATTR_GATE_ID,
-+			sficonf.stream_gate_instance_id))
-+		return -EMSGSIZE;
-+
-+	if (sficonf.stream_filter.maximum_sdu_size)
-+		if (nla_put_u16(rep_skb, TSN_QCI_SFI_ATTR_MAXSDU,
-+				sficonf.stream_filter.maximum_sdu_size))
-+			return -EMSGSIZE;
-+
-+	if (sficonf.stream_filter.flow_meter_instance_id >= 0)
-+		if (nla_put_s32(rep_skb, TSN_QCI_SFI_ATTR_FLOW_ID,
-+				sficonf.stream_filter.flow_meter_instance_id))
-+			return -EMSGSIZE;
-+
-+	if (sficonf.block_oversize_enable)
-+		if (nla_put_flag(rep_skb, TSN_QCI_SFI_ATTR_OVERSIZE_ENABLE))
-+			return -EMSGSIZE;
-+	if (sficonf.block_oversize)
-+		if (nla_put_flag(rep_skb, TSN_QCI_SFI_ATTR_OVERSIZE))
-+			return -EMSGSIZE;
-+
-+	if (nla_put(rep_skb, TSN_QCI_SFI_ATTR_COUNTERS,
-+		    sizeof(struct tsn_qci_psfp_sfi_counters), &sficount))
-+		return -EMSGSIZE;
-+
-+	nla_nest_end(rep_skb, sfiattr);
-+
-+	return tsn_send_reply(rep_skb, info);
-+err:
-+	nlmsg_free(rep_skb);
-+	tsn_simple_reply(info, TSN_CMD_REPLY,
-+			 netdev->name, -EINVAL);
-+exit:
-+	return ret;
-+}
-+
-+static int tsn_qci_sfi_get(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME]) {
-+		cmd_qci_sfi_get(info);
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+static int cmd_qci_sfi_counters_get(struct genl_info *info)
-+{
-+	struct nlattr *na, *sfiattr;
-+	struct nlattr *sfi[TSN_QCI_SFI_ATTR_MAX + 1];
-+	u32 sfi_handle;
-+	struct sk_buff *rep_skb;
-+	int ret;
-+	struct net_device *netdev;
-+	struct genlmsghdr *genlhdr;
-+	struct tsn_qci_psfp_sfi_counters sficount;
-+	const struct tsn_ops *tsnops;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	genlhdr = info->genlhdr;
-+
-+	if (!info->attrs[TSN_ATTR_QCI_SFI])
-+		return -EINVAL;
-+
-+	na = info->attrs[TSN_ATTR_QCI_SFI];
-+
-+	ret = NLA_PARSE_NESTED(sfi, TSN_QCI_SFI_ATTR_MAX,
-+			       na, qci_sfi_policy);
-+	if (ret)
-+		return -EINVAL;
-+
-+	if (!sfi[TSN_QCI_SFI_ATTR_INDEX])
-+		return -EINVAL;
-+
-+	sfi_handle = nla_get_u32(sfi[TSN_QCI_SFI_ATTR_INDEX]);
-+
-+	memset(&sficount, 0, sizeof(struct tsn_qci_psfp_sfi_counters));
-+	if (!tsnops->qci_sfi_counters_get) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -1;
-+	}
-+
-+	ret = tsnops->qci_sfi_counters_get(netdev, sfi_handle, &sficount);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+		return ret;
-+	}
-+
-+	ret = tsn_prepare_reply(info, genlhdr->cmd, &rep_skb,
-+				NLMSG_ALIGN(MAX_ATTR_SIZE));
-+	if (ret < 0)
-+		return ret;
-+
-+	if (nla_put_string(rep_skb, TSN_ATTR_IFNAME, netdev->name))
-+		goto err;
-+
-+	sfiattr = nla_nest_start_noflag(rep_skb, TSN_ATTR_QCI_SFI);
-+	if (!sfiattr) {
-+		ret = -EINVAL;
-+		goto err;
-+	}
-+
-+	if (nla_put_u32(rep_skb, TSN_QCI_SFI_ATTR_INDEX, sfi_handle))
-+		return -EMSGSIZE;
-+
-+	ret = tsnops->qci_sfi_counters_get(netdev, sfi_handle, &sficount);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY, netdev->name, ret);
-+		return ret;
-+	}
-+
-+	if (nla_put(rep_skb, TSN_QCI_SFI_ATTR_COUNTERS,
-+		    sizeof(struct tsn_qci_psfp_sfi_counters), &sficount))
-+		return -EMSGSIZE;
-+
-+	nla_nest_end(rep_skb, sfiattr);
-+
-+	return tsn_send_reply(rep_skb, info);
-+err:
-+	nlmsg_free(rep_skb);
-+	tsn_simple_reply(info, TSN_CMD_REPLY, netdev->name, -EINVAL);
-+	return ret;
-+}
-+
-+static int tsn_qci_sfi_counters_get(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME]) {
-+		cmd_qci_sfi_counters_get(info);
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+static int cmd_qci_sgi_set(struct genl_info *info)
-+{
-+	struct nlattr *na;
-+	struct nlattr *sgia[TSN_QCI_SGI_ATTR_MAX + 1];
-+	struct nlattr *admin[TSN_SGI_ATTR_CTRL_MAX + 1];
-+	int ret = 0;
-+	struct net_device *netdev;
-+	const struct tsn_ops *tsnops;
-+	struct tsn_qci_psfp_sgi_conf sgi;
-+	struct tsn_qci_psfp_gcl *gcl = NULL;
-+	u16 sgi_handle = 0;
-+	u16 listcount = 0;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	memset(&sgi, 0, sizeof(struct tsn_qci_psfp_sgi_conf));
-+
-+	if (!info->attrs[TSN_ATTR_QCI_SGI]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	na = info->attrs[TSN_ATTR_QCI_SGI];
-+
-+	ret = NLA_PARSE_NESTED(sgia, TSN_QCI_SGI_ATTR_MAX,
-+			       na, qci_sgi_policy);
-+	if (ret) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	if (sgia[TSN_QCI_SGI_ATTR_ENABLE] && sgia[TSN_QCI_SGI_ATTR_DISABLE]) {
-+		pr_err("tsn: enable or disable?\n");
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -1;
-+	}
-+
-+	if (sgia[TSN_QCI_SGI_ATTR_INDEX])
-+		sgi_handle = nla_get_u32(sgia[TSN_QCI_SGI_ATTR_INDEX]);
-+
-+	if (sgia[TSN_QCI_SGI_ATTR_DISABLE]) {
-+		sgi.gate_enabled = 0;
-+		goto loaddev;
-+	} else {
-+		/* set default to be enable*/
-+		sgi.gate_enabled = 1;
-+	}
-+
-+	if (sgia[TSN_QCI_SGI_ATTR_CONFCHANGE])
-+		sgi.config_change = 1;
-+
-+	if (sgia[TSN_QCI_SGI_ATTR_IRXEN])
-+		sgi.block_invalid_rx_enable = 1;
-+
-+	if (sgia[TSN_QCI_SGI_ATTR_IRX])
-+		sgi.block_invalid_rx = 1;
-+
-+	if (sgia[TSN_QCI_SGI_ATTR_OEXEN])
-+		sgi.block_octets_exceeded_enable = 1;
-+
-+	if (sgia[TSN_QCI_SGI_ATTR_OEX])
-+		sgi.block_octets_exceeded = 1;
-+
-+	if (sgia[TSN_QCI_SGI_ATTR_ADMINENTRY]) {
-+		struct nlattr *entry;
-+		int rem;
-+		int count = 0;
-+
-+		na = sgia[TSN_QCI_SGI_ATTR_ADMINENTRY];
-+		ret = NLA_PARSE_NESTED(admin, TSN_SGI_ATTR_CTRL_MAX,
-+				       na, qci_sgi_ctrl_policy);
-+
-+		/* Other parameters in admin control */
-+		if (admin[TSN_SGI_ATTR_CTRL_INITSTATE])
-+			sgi.admin.gate_states = 1;
-+
-+		if (admin[TSN_SGI_ATTR_CTRL_CYTIME])
-+			sgi.admin.cycle_time =
-+				nla_get_u32(admin[TSN_SGI_ATTR_CTRL_CYTIME]);
-+
-+		if (admin[TSN_SGI_ATTR_CTRL_CYTIMEEX])
-+			sgi.admin.cycle_time_extension =
-+				nla_get_u32(admin[TSN_SGI_ATTR_CTRL_CYTIMEEX]);
-+
-+		if (admin[TSN_SGI_ATTR_CTRL_BTIME])
-+			sgi.admin.base_time =
-+				nla_get_u64(admin[TSN_SGI_ATTR_CTRL_BTIME]);
-+
-+		if (admin[TSN_SGI_ATTR_CTRL_INITIPV])
-+			sgi.admin.init_ipv =
-+				nla_get_s8(admin[TSN_SGI_ATTR_CTRL_INITIPV]);
-+		else
-+			sgi.admin.init_ipv = -1;
-+
-+		if (admin[TSN_SGI_ATTR_CTRL_LEN]) {
-+			sgi.admin.control_list_length =
-+				nla_get_u8(admin[TSN_SGI_ATTR_CTRL_LEN]);
-+			listcount = sgi.admin.control_list_length;
-+		}
-+
-+		if (!listcount)
-+			goto loaddev;
-+
-+		gcl = kmalloc_array(listcount, sizeof(*gcl), GFP_KERNEL);
-+
-+		memset(gcl, 0, listcount * sizeof(struct tsn_qci_psfp_gcl));
-+
-+		/* Check the whole admin attrs,
-+		 * checkout the TSN_SGI_ATTR_CTRL_GCLENTRY attributes
-+		 */
-+		nla_for_each_nested(entry, na, rem) {
-+			struct nlattr *gcl_entry[TSN_SGI_ATTR_GCL_MAX + 1];
-+			struct nlattr *ti, *om;
-+
-+			if (nla_type(entry) != TSN_SGI_ATTR_CTRL_GCLENTRY)
-+				continue;
-+
-+			/* parse each TSN_SGI_ATTR_CTRL_GCLENTRY */
-+			ret = NLA_PARSE_NESTED(gcl_entry, TSN_SGI_ATTR_GCL_MAX,
-+					       entry, qci_sgi_gcl_policy);
-+			/* Parse gate control list */
-+			if (gcl_entry[TSN_SGI_ATTR_GCL_GATESTATE])
-+				(gcl + count)->gate_state = 1;
-+
-+			if (gcl_entry[TSN_SGI_ATTR_GCL_IPV])
-+				(gcl + count)->ipv =
-+				 nla_get_s8(gcl_entry[TSN_SGI_ATTR_GCL_IPV]);
-+
-+			if (gcl_entry[TSN_SGI_ATTR_GCL_INTERVAL]) {
-+				ti = gcl_entry[TSN_SGI_ATTR_GCL_INTERVAL];
-+				(gcl + count)->time_interval = nla_get_u32(ti);
-+			}
-+
-+			if (gcl_entry[TSN_SGI_ATTR_GCL_OCTMAX]) {
-+				om = gcl_entry[TSN_SGI_ATTR_GCL_OCTMAX];
-+				(gcl + count)->octet_max = nla_get_u32(om);
-+			}
-+
-+			count++;
-+
-+			if (count >= listcount)
-+				break;
-+		}
-+
-+		if (count < listcount) {
-+			tsn_simple_reply(info, TSN_CMD_REPLY,
-+					 netdev->name, -EINVAL);
-+			pr_err("tsn: count less than TSN_SGI_ATTR_CTRL_LEN\n");
-+			kfree(gcl);
-+			return -EINVAL;
-+		}
-+
-+	} else {
-+		pr_info("tsn: no admin list parameters setting\n");
-+	}
-+
-+loaddev:
-+	if (!tsnops->qci_sgi_set) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		kfree(gcl);
-+		return -EINVAL;
-+	}
-+
-+	sgi.admin.gcl = gcl;
-+
-+	ret = tsnops->qci_sgi_set(netdev, sgi_handle, &sgi);
-+	kfree(gcl);
-+	if (!ret)
-+		return tsn_simple_reply(info, TSN_CMD_REPLY,
-+					netdev->name, 0);
-+
-+	tsn_simple_reply(info, TSN_CMD_REPLY,
-+			 netdev->name, ret);
-+	return ret;
-+}
-+
-+static int tsn_qci_sgi_set(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME]) {
-+		cmd_qci_sgi_set(info);
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+static int cmd_qci_sgi_get(struct genl_info *info)
-+{
-+	struct nlattr *na, *sgiattr, *adminattr, *sglattr;
-+	struct nlattr *sgi[TSN_QCI_SGI_ATTR_MAX + 1];
-+	struct sk_buff *rep_skb;
-+	int ret;
-+	struct net_device *netdev;
-+	struct genlmsghdr *genlhdr;
-+	struct tsn_qci_psfp_sgi_conf sgiadmin;
-+	struct tsn_qci_psfp_gcl *gcl = NULL;
-+	const struct tsn_ops *tsnops;
-+	u16 sgi_handle;
-+	u8 listcount, i;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	if (!info->attrs[TSN_ATTR_QCI_SGI]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		pr_err("tsn: no sgi handle input\n");
-+		return -EINVAL;
-+	}
-+
-+	na = info->attrs[TSN_ATTR_QCI_SGI];
-+
-+	ret = NLA_PARSE_NESTED(sgi, TSN_QCI_SGI_ATTR_MAX,
-+			       na, qci_sgi_policy);
-+	if (ret)
-+		return -EINVAL;
-+
-+	if (!sgi[TSN_QCI_SGI_ATTR_INDEX]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		pr_err("tsn: no sgi handle input\n");
-+		return -EINVAL;
-+	}
-+
-+	sgi_handle = nla_get_u32(sgi[TSN_QCI_SGI_ATTR_INDEX]);
-+
-+	/* Get config data from device */
-+	genlhdr = info->genlhdr;
-+
-+	memset(&sgiadmin, 0, sizeof(struct tsn_qci_psfp_sgi_conf));
-+
-+	if (!tsnops->qci_sgi_get) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -1;
-+	}
-+
-+	ret = tsnops->qci_sgi_get(netdev, sgi_handle, &sgiadmin);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+		return ret;
-+	}
-+
-+	/* Form netlink reply data */
-+	ret = tsn_prepare_reply(info, genlhdr->cmd,
-+				&rep_skb, NLMSG_ALIGN(MAX_ATTR_SIZE));
-+	if (ret < 0)
-+		return ret;
-+
-+	if (nla_put_string(rep_skb, TSN_ATTR_IFNAME, netdev->name))
-+		return -EMSGSIZE;
-+
-+	sgiattr = nla_nest_start_noflag(rep_skb, TSN_ATTR_QCI_SGI);
-+	if (!sgiattr)
-+		return -EMSGSIZE;
-+
-+	if (nla_put_u32(rep_skb, TSN_QCI_SGI_ATTR_INDEX, sgi_handle))
-+		return -EMSGSIZE;
-+
-+	/* Gate enable? sgiadmin.gate_enabled */
-+	if (sgiadmin.gate_enabled) {
-+		if (nla_put_flag(rep_skb, TSN_QCI_SGI_ATTR_ENABLE))
-+			return -EMSGSIZE;
-+	} else {
-+		if (nla_put_flag(rep_skb, TSN_QCI_SGI_ATTR_DISABLE))
-+			return -EMSGSIZE;
-+	}
-+
-+	if (sgiadmin.config_change)
-+		if (nla_put_flag(rep_skb, TSN_QCI_SGI_ATTR_CONFCHANGE))
-+			return -EMSGSIZE;
-+
-+	if (sgiadmin.block_invalid_rx_enable)
-+		if (nla_put_flag(rep_skb, TSN_QCI_SGI_ATTR_IRXEN))
-+			return -EMSGSIZE;
-+
-+	if (sgiadmin.block_invalid_rx)
-+		if (nla_put_flag(rep_skb, TSN_QCI_SGI_ATTR_IRX))
-+			return -EMSGSIZE;
-+
-+	if (sgiadmin.block_octets_exceeded_enable)
-+		if (nla_put_flag(rep_skb, TSN_QCI_SGI_ATTR_OEXEN))
-+			return -EMSGSIZE;
-+
-+	if (sgiadmin.block_octets_exceeded)
-+		if (nla_put_flag(rep_skb, TSN_QCI_SGI_ATTR_OEX))
-+			return -EMSGSIZE;
-+
-+	/* Administration */
-+	adminattr = nla_nest_start_noflag(rep_skb, TSN_QCI_SGI_ATTR_ADMINENTRY);
-+	if (!adminattr)
-+		return -EMSGSIZE;
-+
-+	if (sgiadmin.admin.gate_states)
-+		if (nla_put_flag(rep_skb, TSN_SGI_ATTR_CTRL_INITSTATE))
-+			return -EMSGSIZE;
-+
-+	if (nla_put_u32(rep_skb, TSN_SGI_ATTR_CTRL_CYTIME,
-+			sgiadmin.admin.cycle_time) ||
-+	    nla_put_u32(rep_skb, TSN_SGI_ATTR_CTRL_CYTIMEEX,
-+			sgiadmin.admin.cycle_time_extension) ||
-+	    NLA_PUT_U64(rep_skb, TSN_SGI_ATTR_CTRL_BTIME,
-+			sgiadmin.admin.base_time) ||
-+	    nla_put_u8(rep_skb, TSN_SGI_ATTR_CTRL_INITIPV,
-+		       sgiadmin.admin.init_ipv))
-+		return -EMSGSIZE;
-+
-+	listcount = sgiadmin.admin.control_list_length;
-+	if (!listcount)
-+		goto out1;
-+
-+	if (!sgiadmin.admin.gcl) {
-+		pr_err("error: no gate control list\n");
-+		ret = -EINVAL;
-+		goto err;
-+	}
-+
-+	gcl = sgiadmin.admin.gcl;
-+
-+	/* loop list */
-+	for (i = 0; i < listcount; i++) {
-+		s8 ipv;
-+		u32 ti, omax;
-+
-+		if (!(gcl + i)) {
-+			pr_err("error: list count too big\n");
-+			ret = -EINVAL;
-+			kfree(sgiadmin.admin.gcl);
-+			goto err;
-+		}
-+
-+		/* Adminastration entry */
-+		sglattr = nla_nest_start_noflag(rep_skb,
-+						TSN_SGI_ATTR_CTRL_GCLENTRY);
-+		if (!sglattr)
-+			return -EMSGSIZE;
-+		ipv = (gcl + i)->ipv;
-+		ti = (gcl + i)->time_interval;
-+		omax = (gcl + i)->octet_max;
-+
-+		if ((gcl + i)->gate_state)
-+			if (nla_put_flag(rep_skb, TSN_SGI_ATTR_GCL_GATESTATE))
-+				return -EMSGSIZE;
-+
-+		if (nla_put_s8(rep_skb, TSN_SGI_ATTR_GCL_IPV, ipv) ||
-+		    nla_put_u32(rep_skb, TSN_SGI_ATTR_GCL_INTERVAL, ti) ||
-+		    nla_put_u32(rep_skb, TSN_SGI_ATTR_GCL_OCTMAX, omax))
-+			return -EMSGSIZE;
-+
-+		/* End administration entry */
-+		nla_nest_end(rep_skb, sglattr);
-+	}
-+
-+	kfree(sgiadmin.admin.gcl);
-+	if (nla_put_u8(rep_skb, TSN_SGI_ATTR_CTRL_LEN, listcount))
-+		return -EMSGSIZE;
-+
-+out1:
-+	/* End adminastration */
-+	nla_nest_end(rep_skb, adminattr);
-+
-+	nla_nest_end(rep_skb, sgiattr);
-+
-+	return tsn_send_reply(rep_skb, info);
-+err:
-+	nlmsg_free(rep_skb);
-+	tsn_simple_reply(info, TSN_CMD_REPLY, netdev->name, ret);
-+	return ret;
-+}
-+
-+static int tsn_qci_sgi_get(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME]) {
-+		cmd_qci_sgi_get(info);
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+static int cmd_qci_sgi_status_get(struct genl_info *info)
-+{
-+	struct nlattr *na, *sgiattr, *operattr, *sglattr;
-+	struct nlattr *sgi[TSN_QCI_SGI_ATTR_MAX + 1];
-+	struct sk_buff *rep_skb;
-+	int ret;
-+	struct net_device *netdev;
-+	struct genlmsghdr *genlhdr;
-+	struct tsn_psfp_sgi_status sgistat;
-+	struct tsn_qci_psfp_gcl *gcl = NULL;
-+	const struct tsn_ops *tsnops;
-+	u16 sgi_handle;
-+	u8 listcount;
-+	int valid, i;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	if (!info->attrs[TSN_ATTR_QCI_SGI]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		pr_err("tsn: no sgi handle input\n");
-+		return -EINVAL;
-+	}
-+
-+	na = info->attrs[TSN_ATTR_QCI_SGI];
-+
-+	ret = NLA_PARSE_NESTED(sgi, TSN_QCI_SGI_ATTR_MAX,
-+			       na, qci_sgi_policy);
-+	if (ret)
-+		return -EINVAL;
-+
-+	if (!sgi[TSN_QCI_SGI_ATTR_INDEX]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		pr_err("tsn: no sgi handle input\n");
-+		return -EINVAL;
-+	}
-+
-+	sgi_handle = nla_get_u32(sgi[TSN_QCI_SGI_ATTR_INDEX]);
-+
-+	/* Get status data from device */
-+	genlhdr = info->genlhdr;
-+
-+	memset(&sgistat, 0, sizeof(struct tsn_psfp_sgi_status));
-+
-+	if (!tsnops->qci_sgi_status_get) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -1;
-+	}
-+
-+	valid = tsnops->qci_sgi_status_get(netdev, sgi_handle, &sgistat);
-+	if (valid < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, valid);
-+		return valid;
-+	}
-+
-+	/* Form netlink reply data */
-+	ret = tsn_prepare_reply(info, genlhdr->cmd,
-+				&rep_skb, NLMSG_ALIGN(MAX_ATTR_SIZE));
-+	if (ret < 0)
-+		return ret;
-+
-+	if (nla_put_string(rep_skb, TSN_ATTR_IFNAME, netdev->name))
-+		return -EMSGSIZE;
-+
-+	/* Down one netlink attribute level */
-+	sgiattr = nla_nest_start_noflag(rep_skb, TSN_ATTR_QCI_SGI);
-+	if (!sgiattr)
-+		return -EMSGSIZE;
-+
-+	if (nla_put_u32(rep_skb, TSN_QCI_SGI_ATTR_INDEX, sgi_handle))
-+		return -EMSGSIZE;
-+
-+	/* Gate enable */
-+	if (valid == 1) {
-+		if (nla_put_flag(rep_skb, TSN_QCI_SGI_ATTR_ENABLE))
-+			return -EMSGSIZE;
-+	} else {
-+		if (nla_put_flag(rep_skb, TSN_QCI_SGI_ATTR_DISABLE))
-+			return -EMSGSIZE;
-+	}
-+
-+	if (nla_put_u32(rep_skb, TSN_QCI_SGI_ATTR_TICKG,
-+			sgistat.tick_granularity) ||
-+	    NLA_PUT_U64(rep_skb, TSN_QCI_SGI_ATTR_CCTIME,
-+			sgistat.config_change_time) ||
-+	    NLA_PUT_U64(rep_skb, TSN_QCI_SGI_ATTR_CUTIME,
-+			sgistat.current_time) ||
-+	    NLA_PUT_U64(rep_skb, TSN_QCI_SGI_ATTR_CCERROR,
-+			sgistat.config_change_error))
-+		return -EMSGSIZE;
-+
-+	if (sgistat.config_pending)
-+		if (nla_put_flag(rep_skb, TSN_QCI_SGI_ATTR_CPENDING))
-+			return -EMSGSIZE;
-+
-+	/* operation data */
-+	operattr = nla_nest_start_noflag(rep_skb, TSN_QCI_SGI_ATTR_OPERENTRY);
-+	if (!operattr)
-+		return -EMSGSIZE;
-+
-+	if (sgistat.oper.gate_states)
-+		if (nla_put_flag(rep_skb, TSN_SGI_ATTR_CTRL_INITSTATE))
-+			return -EMSGSIZE;
-+
-+	if (nla_put_u32(rep_skb, TSN_SGI_ATTR_CTRL_CYTIME,
-+			sgistat.oper.cycle_time) ||
-+	    nla_put_u32(rep_skb, TSN_SGI_ATTR_CTRL_CYTIMEEX,
-+			sgistat.oper.cycle_time_extension) ||
-+	    NLA_PUT_U64(rep_skb, TSN_SGI_ATTR_CTRL_BTIME,
-+			sgistat.oper.base_time) ||
-+	    nla_put_u8(rep_skb, TSN_SGI_ATTR_CTRL_INITIPV,
-+		       sgistat.oper.init_ipv))
-+		return -EMSGSIZE;
-+
-+	/* Loop list */
-+	listcount = sgistat.oper.control_list_length;
-+	if (!listcount)
-+		goto out1;
-+
-+	if (!sgistat.oper.gcl) {
-+		pr_err("error: list lenghth is not zero!\n");
-+		ret = -EINVAL;
-+		goto err;
-+	}
-+
-+	gcl = sgistat.oper.gcl;
-+
-+	/* loop list */
-+	for (i = 0; i < listcount; i++) {
-+		s8 ipv;
-+		u32 ti, omax;
-+
-+		if (!(gcl + i)) {
-+			pr_err("error: list count too big\n");
-+			ret = -EINVAL;
-+			kfree(sgistat.oper.gcl);
-+			goto err;
-+		}
-+
-+		/* Operation entry */
-+		sglattr = nla_nest_start_noflag(rep_skb,
-+						TSN_SGI_ATTR_CTRL_GCLENTRY);
-+		if (!sglattr)
-+			return -EMSGSIZE;
-+		ipv = (gcl + i)->ipv;
-+		ti = (gcl + i)->time_interval;
-+		omax = (gcl + i)->octet_max;
-+
-+		if ((gcl + i)->gate_state)
-+			if (nla_put_flag(rep_skb, TSN_SGI_ATTR_GCL_GATESTATE))
-+				return -EMSGSIZE;
-+
-+		if (nla_put_s8(rep_skb, TSN_SGI_ATTR_GCL_IPV, ipv) ||
-+		    nla_put_u32(rep_skb, TSN_SGI_ATTR_GCL_INTERVAL, ti) ||
-+		    nla_put_u32(rep_skb, TSN_SGI_ATTR_GCL_OCTMAX, omax))
-+			return -EMSGSIZE;
-+
-+		/* End operation entry */
-+		nla_nest_end(rep_skb, sglattr);
-+	}
-+
-+	kfree(sgistat.oper.gcl);
-+	if (nla_put_u8(rep_skb, TSN_SGI_ATTR_CTRL_LEN, listcount))
-+		return -EMSGSIZE;
-+out1:
-+	/* End operation */
-+	nla_nest_end(rep_skb, operattr);
-+
-+	nla_nest_end(rep_skb, sgiattr);
-+
-+	return tsn_send_reply(rep_skb, info);
-+err:
-+	nlmsg_free(rep_skb);
-+	tsn_simple_reply(info, TSN_CMD_REPLY, netdev->name, ret);
-+	return ret;
-+}
-+
-+static int tsn_qci_sgi_status_get(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME]) {
-+		cmd_qci_sgi_status_get(info);
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+static int cmd_qci_fmi_set(struct genl_info *info)
-+{
-+	struct nlattr *na, *fmi[TSN_QCI_FMI_ATTR_MAX + 1];
-+	u32 index;
-+	int ret;
-+	struct net_device *netdev;
-+	struct tsn_qci_psfp_fmi fmiconf;
-+	const struct tsn_ops *tsnops;
-+	bool enable = 0;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	memset(&fmiconf, 0, sizeof(struct tsn_qci_psfp_fmi));
-+
-+	if (!info->attrs[TSN_ATTR_QCI_FMI])
-+		return -EINVAL;
-+
-+	na = info->attrs[TSN_ATTR_QCI_FMI];
-+
-+	ret = NLA_PARSE_NESTED(fmi, TSN_QCI_FMI_ATTR_MAX, na, qci_fmi_policy);
-+	if (ret) {
-+		pr_info("tsn: parse value TSN_QCI_FMI_ATTR_MAX  error.");
-+		return -EINVAL;
-+	}
-+
-+	if (!fmi[TSN_QCI_FMI_ATTR_INDEX])
-+		return -EINVAL;
-+
-+	index = nla_get_u32(fmi[TSN_QCI_FMI_ATTR_INDEX]);
-+
-+	if (fmi[TSN_QCI_FMI_ATTR_DISABLE])
-+		goto loaddev;
-+
-+	enable = 1;
-+
-+	if (fmi[TSN_QCI_FMI_ATTR_CIR])
-+		fmiconf.cir = nla_get_u32(fmi[TSN_QCI_FMI_ATTR_CIR]);
-+
-+	if (fmi[TSN_QCI_FMI_ATTR_CBS])
-+		fmiconf.cbs = nla_get_u32(fmi[TSN_QCI_FMI_ATTR_CBS]);
-+
-+	if (fmi[TSN_QCI_FMI_ATTR_EIR])
-+		fmiconf.eir = nla_get_u32(fmi[TSN_QCI_FMI_ATTR_EIR]);
-+
-+	if (fmi[TSN_QCI_FMI_ATTR_EBS])
-+		fmiconf.ebs = nla_get_u32(fmi[TSN_QCI_FMI_ATTR_EBS]);
-+
-+	if (fmi[TSN_QCI_FMI_ATTR_CF])
-+		fmiconf.cf = 1;
-+
-+	if (fmi[TSN_QCI_FMI_ATTR_CM])
-+		fmiconf.cm = 1;
-+
-+	if (fmi[TSN_QCI_FMI_ATTR_DROPYL])
-+		fmiconf.drop_on_yellow = 1;
-+
-+	if (fmi[TSN_QCI_FMI_ATTR_MAREDEN])
-+		fmiconf.mark_red_enable = 1;
-+
-+	if (fmi[TSN_QCI_FMI_ATTR_MARED])
-+		fmiconf.mark_red = 1;
-+
-+loaddev:
-+
-+	if (!tsnops->qci_fmi_set) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -EINVAL;
-+	}
-+
-+	ret = tsnops->qci_fmi_set(netdev, index, enable, &fmiconf);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY, netdev->name, ret);
-+		return ret;
-+	}
-+
-+	ret = tsn_simple_reply(info, TSN_CMD_REPLY, netdev->name, 0);
-+
-+	if (ret)
-+		return ret;
-+	return 0;
-+}
-+
-+static int tsn_qci_fmi_set(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME]) {
-+		cmd_qci_fmi_set(info);
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+static int cmd_qci_fmi_get(struct genl_info *info)
-+{
-+	struct nlattr *na, *fmi[TSN_QCI_FMI_ATTR_MAX + 1], *fmiattr;
-+	u32 index;
-+	struct sk_buff *rep_skb;
-+	int ret;
-+	struct net_device *netdev;
-+	struct tsn_qci_psfp_fmi fmiconf;
-+	struct tsn_qci_psfp_fmi_counters counters;
-+	const struct tsn_ops *tsnops;
-+	struct genlmsghdr *genlhdr;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	if (!info->attrs[TSN_ATTR_QCI_FMI])
-+		return -EINVAL;
-+
-+	na = info->attrs[TSN_ATTR_QCI_FMI];
-+
-+	ret = NLA_PARSE_NESTED(fmi, TSN_QCI_FMI_ATTR_MAX,
-+			       na, qci_fmi_policy);
-+	if (ret) {
-+		pr_info("tsn: parse value TSN_QCI_FMI_ATTR_MAX  error.");
-+		return -EINVAL;
-+	}
-+
-+	if (!fmi[TSN_QCI_FMI_ATTR_INDEX])
-+		return -EINVAL;
-+
-+	index = nla_get_u32(fmi[TSN_QCI_FMI_ATTR_INDEX]);
-+
-+	/* Get data from device */
-+	memset(&fmiconf, 0, sizeof(struct tsn_qci_psfp_fmi));
-+	memset(&counters, 0, sizeof(struct tsn_qci_psfp_fmi_counters));
-+
-+	if (!tsnops->qci_fmi_get) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -EINVAL;
-+	}
-+
-+	ret = tsnops->qci_fmi_get(netdev, index, &fmiconf, &counters);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY, netdev->name, ret);
-+		return ret;
-+	}
-+
-+	genlhdr = info->genlhdr;
-+
-+	/* Form netlink reply data */
-+	ret = tsn_prepare_reply(info, genlhdr->cmd,
-+				&rep_skb, NLMSG_ALIGN(MAX_ATTR_SIZE));
-+	if (ret < 0)
-+		return ret;
-+
-+	if (nla_put_string(rep_skb, TSN_ATTR_IFNAME, netdev->name))
-+		return -EMSGSIZE;
-+
-+	fmiattr = nla_nest_start_noflag(rep_skb, TSN_ATTR_QCI_FMI);
-+	if (!fmiattr)
-+		return -EMSGSIZE;
-+
-+	if (nla_put_u32(rep_skb, TSN_QCI_FMI_ATTR_INDEX, index) ||
-+	    nla_put_u32(rep_skb, TSN_QCI_FMI_ATTR_CIR, fmiconf.cir) ||
-+	    nla_put_u32(rep_skb, TSN_QCI_FMI_ATTR_CBS, fmiconf.cbs) ||
-+	    nla_put_u32(rep_skb, TSN_QCI_FMI_ATTR_EIR, fmiconf.eir) ||
-+	    nla_put_u32(rep_skb, TSN_QCI_FMI_ATTR_EBS, fmiconf.ebs))
-+		return -EMSGSIZE;
-+
-+	if (fmiconf.cf)
-+		if (nla_put_flag(rep_skb, TSN_QCI_FMI_ATTR_CF))
-+			return -EMSGSIZE;
-+
-+	if (fmiconf.cm)
-+		if (nla_put_flag(rep_skb, TSN_QCI_FMI_ATTR_CM))
-+			return -EMSGSIZE;
-+
-+	if (fmiconf.drop_on_yellow)
-+		if (nla_put_flag(rep_skb, TSN_QCI_FMI_ATTR_DROPYL))
-+			return -EMSGSIZE;
-+
-+	if (fmiconf.mark_red_enable)
-+		if (nla_put_flag(rep_skb, TSN_QCI_FMI_ATTR_MAREDEN))
-+			return -EMSGSIZE;
-+
-+	if (fmiconf.mark_red)
-+		if (nla_put_flag(rep_skb, TSN_QCI_FMI_ATTR_MAREDEN))
-+			return -EMSGSIZE;
-+
-+	if (nla_put(rep_skb, TSN_QCI_FMI_ATTR_COUNTERS,
-+		    sizeof(struct tsn_qci_psfp_fmi_counters), &counters))
-+		return -EMSGSIZE;
-+
-+	nla_nest_end(rep_skb, fmiattr);
-+
-+	tsn_send_reply(rep_skb, info);
-+
-+	return 0;
-+}
-+
-+static int tsn_qci_fmi_get(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME]) {
-+		cmd_qci_fmi_get(info);
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+static int cmd_qbv_set(struct genl_info *info)
-+{
-+	struct nlattr *na, *na1;
-+	struct nlattr *qbv_table;
-+	struct nlattr *qbv[TSN_QBV_ATTR_MAX + 1];
-+	struct nlattr *qbvctrl[TSN_QBV_ATTR_CTRL_MAX + 1];
-+	int rem;
-+	int ret = 0;
-+	struct net_device *netdev;
-+	struct tsn_qbv_conf qbvconfig;
-+	const struct tsn_ops *tsnops;
-+	struct tsn_qbv_entry *gatelist = NULL;
-+	int count = 0;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	memset(&qbvconfig, 0, sizeof(struct tsn_qbv_conf));
-+
-+	if (!info->attrs[TSN_ATTR_QBV])
-+		return -EINVAL;
-+
-+	na = info->attrs[TSN_ATTR_QBV];
-+
-+	ret = NLA_PARSE_NESTED(qbv, TSN_QBV_ATTR_MAX, na, qbv_policy);
-+	if (ret)
-+		return -EINVAL;
-+
-+	if (qbv[TSN_QBV_ATTR_ENABLE])
-+		qbvconfig.gate_enabled = 1;
-+	else
-+		goto setdrive;
-+
-+	if (qbv[TSN_QBV_ATTR_CONFIGCHANGE])
-+		qbvconfig.config_change = 1;
-+
-+	if (!qbv[TSN_QBV_ATTR_ADMINENTRY]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -1;
-+	}
-+
-+	na1 = qbv[TSN_QBV_ATTR_ADMINENTRY];
-+	NLA_PARSE_NESTED(qbvctrl, TSN_QBV_ATTR_CTRL_MAX,
-+			 na1, qbv_ctrl_policy);
-+
-+	if (qbvctrl[TSN_QBV_ATTR_CTRL_CYCLETIME]) {
-+		qbvconfig.admin.cycle_time =
-+			nla_get_u32(qbvctrl[TSN_QBV_ATTR_CTRL_CYCLETIME]);
-+	}
-+
-+	if (qbvctrl[TSN_QBV_ATTR_CTRL_CYCLETIMEEXT]) {
-+		qbvconfig.admin.cycle_time_extension =
-+			nla_get_u32(qbvctrl[TSN_QBV_ATTR_CTRL_CYCLETIMEEXT]);
-+	}
-+
-+	if (qbvctrl[TSN_QBV_ATTR_CTRL_BASETIME]) {
-+		qbvconfig.admin.base_time =
-+			nla_get_u64(qbvctrl[TSN_QBV_ATTR_CTRL_BASETIME]);
-+	}
-+
-+	if (qbvctrl[TSN_QBV_ATTR_CTRL_GATESTATE]) {
-+		qbvconfig.admin.gate_states =
-+			nla_get_u8(qbvctrl[TSN_QBV_ATTR_CTRL_GATESTATE]);
-+	}
-+
-+	if (qbvctrl[TSN_QBV_ATTR_CTRL_LISTCOUNT]) {
-+		int listcount;
-+
-+		listcount = nla_get_u32(qbvctrl[TSN_QBV_ATTR_CTRL_LISTCOUNT]);
-+
-+		qbvconfig.admin.control_list_length = listcount;
-+
-+		gatelist = kmalloc_array(listcount,
-+					 sizeof(*gatelist),
-+					 GFP_KERNEL);
-+
-+		nla_for_each_nested(qbv_table, na1, rem) {
-+			struct nlattr *qbv_entry[TSN_QBV_ATTR_ENTRY_MAX + 1];
-+
-+			if (nla_type(qbv_table) != TSN_QBV_ATTR_CTRL_LISTENTRY)
-+				continue;
-+
-+			ret = NLA_PARSE_NESTED(qbv_entry,
-+					       TSN_QBV_ATTR_ENTRY_MAX,
-+					       qbv_table, qbv_entry_policy);
-+			if (ret)
-+				return -EINVAL;
-+
-+			(gatelist + count)->gate_state =
-+				nla_get_u8(qbv_entry[TSN_QBV_ATTR_ENTRY_GC]);
-+			(gatelist + count)->time_interval =
-+				nla_get_u32(qbv_entry[TSN_QBV_ATTR_ENTRY_TM]);
-+			count++;
-+			if (count > listcount)
-+				break;
-+		}
-+	}
-+
-+	if (gatelist)
-+		qbvconfig.admin.control_list = gatelist;
-+
-+setdrive:
-+	if (!tsnops->qbv_set) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		goto err;
-+	}
-+
-+	ret = tsnops->qbv_set(netdev, &qbvconfig);
-+
-+	/* send back */
-+	if (ret < 0)
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+	else
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, 0);
-+
-+err:
-+	kfree(gatelist);
-+	return ret;
-+}
-+
-+static int tsn_qbv_set(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME]) {
-+		cmd_qbv_set(info);
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+static int cmd_qbv_get(struct genl_info *info)
-+{
-+	struct nlattr *qbv, *qbvadminattr;
-+	struct sk_buff *rep_skb;
-+	int ret;
-+	int len = 0, i = 0;
-+	struct net_device *netdev;
-+	struct genlmsghdr *genlhdr;
-+	struct tsn_qbv_conf qbvconf;
-+	const struct tsn_ops *tsnops;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	genlhdr = info->genlhdr;
-+
-+	memset(&qbvconf, 0, sizeof(struct tsn_qbv_conf));
-+
-+	if (!tsnops->qbv_get) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -1;
-+	}
-+
-+	ret = tsnops->qbv_get(netdev, &qbvconf);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+		return ret;
-+	}
-+
-+	ret = tsn_prepare_reply(info, genlhdr->cmd,
-+				&rep_skb, NLMSG_ALIGN(MAX_ATTR_SIZE));
-+	if (ret < 0)
-+		return ret;
-+
-+	if (nla_put_string(rep_skb, TSN_ATTR_IFNAME, netdev->name))
-+		return -EMSGSIZE;
-+
-+	qbv = nla_nest_start_noflag(rep_skb, TSN_ATTR_QBV);
-+	if (!qbv)
-+		return -EMSGSIZE;
-+
-+	qbvadminattr = nla_nest_start_noflag(rep_skb, TSN_QBV_ATTR_ADMINENTRY);
-+	if (!qbvadminattr)
-+		return -EMSGSIZE;
-+
-+	if (qbvconf.admin.control_list) {
-+		len = qbvconf.admin.control_list_length;
-+		if (nla_put_u32(rep_skb, TSN_QBV_ATTR_CTRL_LISTCOUNT, len))
-+			return -EMSGSIZE;
-+
-+		for (i = 0; i < len; i++) {
-+			struct nlattr *qbv_table;
-+			u8 gs;
-+			u32 tp;
-+			int glisttype = TSN_QBV_ATTR_CTRL_LISTENTRY;
-+
-+			gs = (qbvconf.admin.control_list + i)->gate_state;
-+			tp = (qbvconf.admin.control_list + i)->time_interval;
-+
-+			qbv_table =
-+				nla_nest_start_noflag(rep_skb, glisttype);
-+			if (!qbv_table)
-+				return -EMSGSIZE;
-+
-+			if (nla_put_u32(rep_skb, TSN_QBV_ATTR_ENTRY_ID, i) ||
-+			    nla_put_u8(rep_skb, TSN_QBV_ATTR_ENTRY_GC, gs) ||
-+			    nla_put_u32(rep_skb, TSN_QBV_ATTR_ENTRY_TM, tp))
-+				return -EMSGSIZE;
-+			nla_nest_end(rep_skb, qbv_table);
-+		}
-+
-+		if (qbvconf.admin.gate_states)
-+			if (nla_put_u8(rep_skb, TSN_QBV_ATTR_CTRL_GATESTATE,
-+				       qbvconf.admin.gate_states))
-+				return -EMSGSIZE;
-+
-+		if (qbvconf.admin.cycle_time)
-+			if (nla_put_u32(rep_skb, TSN_QBV_ATTR_CTRL_CYCLETIME,
-+					qbvconf.admin.cycle_time))
-+				return -EMSGSIZE;
-+
-+		if (qbvconf.admin.cycle_time_extension)
-+			if (nla_put_u32(rep_skb, TSN_QBV_ATTR_CTRL_CYCLETIMEEXT,
-+					qbvconf.admin.cycle_time_extension))
-+				return -EMSGSIZE;
-+
-+		if (qbvconf.admin.base_time)
-+			if (NLA_PUT_U64(rep_skb, TSN_QBV_ATTR_CTRL_BASETIME,
-+					qbvconf.admin.base_time))
-+				return -EMSGSIZE;
-+
-+		kfree(qbvconf.admin.control_list);
-+
-+	} else {
-+		pr_info("tsn: error get administrator data.");
-+	}
-+
-+	nla_nest_end(rep_skb, qbvadminattr);
-+
-+	if (qbvconf.gate_enabled) {
-+		if (nla_put_flag(rep_skb, TSN_QBV_ATTR_ENABLE))
-+			return -EMSGSIZE;
-+	} else {
-+		if (nla_put_flag(rep_skb, TSN_QBV_ATTR_DISABLE))
-+			return -EMSGSIZE;
-+	}
-+
-+	if (qbvconf.maxsdu)
-+		if (nla_put_u32(rep_skb, TSN_QBV_ATTR_MAXSDU, qbvconf.maxsdu))
-+			return -EMSGSIZE;
-+
-+	if (qbvconf.config_change)
-+		if (nla_put_flag(rep_skb, TSN_QBV_ATTR_CONFIGCHANGE))
-+			return -EMSGSIZE;
-+
-+	nla_nest_end(rep_skb, qbv);
-+
-+	tsn_send_reply(rep_skb, info);
-+
-+	return ret;
-+}
-+
-+static int cmd_qbv_status_get(struct genl_info *info)
-+{
-+	struct nlattr *qbv, *qbvoperattr;
-+	struct sk_buff *rep_skb;
-+	int ret;
-+	int len = 0, i = 0;
-+	struct net_device *netdev;
-+	struct genlmsghdr *genlhdr;
-+	struct tsn_qbv_status qbvstatus;
-+	const struct tsn_ops *tsnops;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	genlhdr = info->genlhdr;
-+
-+	memset(&qbvstatus, 0, sizeof(struct tsn_qbv_status));
-+
-+	if (!tsnops->qbv_get_status) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -1;
-+	}
-+
-+	ret = tsnops->qbv_get_status(netdev, &qbvstatus);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+		return ret;
-+	}
-+
-+	ret = tsn_prepare_reply(info, genlhdr->cmd,
-+				&rep_skb, NLMSG_ALIGN(MAX_ATTR_SIZE));
-+	if (ret < 0)
-+		return ret;
-+
-+	if (nla_put_string(rep_skb, TSN_ATTR_IFNAME, netdev->name))
-+		return -EMSGSIZE;
-+
-+	qbv = nla_nest_start_noflag(rep_skb, TSN_ATTR_QBV);
-+	if (!qbv)
-+		return -EMSGSIZE;
-+
-+	qbvoperattr = nla_nest_start_noflag(rep_skb, TSN_QBV_ATTR_OPERENTRY);
-+	if (!qbvoperattr)
-+		return -EMSGSIZE;
-+
-+	if (qbvstatus.oper.control_list) {
-+		len = qbvstatus.oper.control_list_length;
-+		if (nla_put_u32(rep_skb, TSN_QBV_ATTR_CTRL_LISTCOUNT, len)) {
-+			nla_nest_cancel(rep_skb, qbvoperattr);
-+			return -EMSGSIZE;
-+		}
-+
-+		for (i = 0; i < len; i++) {
-+			struct nlattr *qbv_table;
-+			u8 gs;
-+			u32 tp;
-+			int glisttype = TSN_QBV_ATTR_CTRL_LISTENTRY;
-+
-+			gs = (qbvstatus.oper.control_list + i)->gate_state;
-+			tp = (qbvstatus.oper.control_list + i)->time_interval;
-+
-+			qbv_table = nla_nest_start_noflag(rep_skb, glisttype);
-+			if (!qbv_table)
-+				return -EMSGSIZE;
-+
-+			if (nla_put_u32(rep_skb, TSN_QBV_ATTR_ENTRY_ID, i) ||
-+			    nla_put_u8(rep_skb, TSN_QBV_ATTR_ENTRY_GC, gs) ||
-+			    nla_put_u32(rep_skb, TSN_QBV_ATTR_ENTRY_TM, tp)) {
-+				nla_nest_cancel(rep_skb, qbv_table);
-+				return -EMSGSIZE;
-+			}
-+
-+			nla_nest_end(rep_skb, qbv_table);
-+		}
-+
-+		if (qbvstatus.oper.gate_states) {
-+			if (nla_put_u8(rep_skb, TSN_QBV_ATTR_CTRL_GATESTATE,
-+				       qbvstatus.oper.gate_states))
-+				return -EMSGSIZE;
-+		}
-+
-+		if (qbvstatus.oper.cycle_time) {
-+			if (nla_put_u32(rep_skb, TSN_QBV_ATTR_CTRL_CYCLETIME,
-+					qbvstatus.oper.cycle_time))
-+				return -EMSGSIZE;
-+		}
-+
-+		if (qbvstatus.oper.cycle_time_extension) {
-+			if (nla_put_u32(rep_skb, TSN_QBV_ATTR_CTRL_CYCLETIMEEXT,
-+					qbvstatus.oper.cycle_time_extension))
-+				return -EMSGSIZE;
-+		}
-+
-+		if (qbvstatus.oper.base_time) {
-+			if (NLA_PUT_U64(rep_skb, TSN_QBV_ATTR_CTRL_BASETIME,
-+					qbvstatus.oper.base_time))
-+				return -EMSGSIZE;
-+		}
-+
-+		kfree(qbvstatus.oper.control_list);
-+	} else {
-+		pr_info("tsn: error get operation list data.");
-+	}
-+
-+	nla_nest_end(rep_skb, qbvoperattr);
-+
-+	if (qbvstatus.config_change_time) {
-+		if (NLA_PUT_U64(rep_skb, TSN_QBV_ATTR_CONFIGCHANGETIME,
-+				qbvstatus.config_change_time))
-+			return -EMSGSIZE;
-+	}
-+
-+	if (qbvstatus.tick_granularity) {
-+		if (nla_put_u32(rep_skb, TSN_QBV_ATTR_GRANULARITY,
-+				qbvstatus.tick_granularity))
-+			return -EMSGSIZE;
-+	}
-+
-+	if (qbvstatus.current_time) {
-+		if (NLA_PUT_U64(rep_skb, TSN_QBV_ATTR_CURRENTTIME,
-+				qbvstatus.current_time))
-+			return -EMSGSIZE;
-+	}
-+
-+	if (qbvstatus.config_pending) {
-+		if (nla_put_flag(rep_skb, TSN_QBV_ATTR_CONFIGPENDING))
-+			return -EMSGSIZE;
-+	}
-+
-+	if (qbvstatus.config_change_error) {
-+		if (NLA_PUT_U64(rep_skb, TSN_QBV_ATTR_CONFIGCHANGEERROR,
-+				qbvstatus.config_change_error))
-+			return -EMSGSIZE;
-+	}
-+
-+	if (qbvstatus.supported_list_max) {
-+		if (nla_put_u32(rep_skb, TSN_QBV_ATTR_LISTMAX,
-+				qbvstatus.supported_list_max))
-+			return -EMSGSIZE;
-+	}
-+
-+	nla_nest_end(rep_skb, qbv);
-+
-+	tsn_send_reply(rep_skb, info);
-+
-+	return ret;
-+}
-+
-+static int tsn_qbv_status_get(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME])
-+		cmd_qbv_status_get(info);
-+
-+	return 0;
-+}
-+
-+static int tsn_qbv_get(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME])
-+		cmd_qbv_get(info);
-+
-+	return 0;
-+}
-+
-+static int tsn_cbs_set(struct sk_buff *skb, struct genl_info *info)
-+{
-+	struct nlattr *na;
-+	struct nlattr *cbsa[TSN_CBS_ATTR_MAX + 1];
-+	struct net_device *netdev;
-+	const struct tsn_ops *tsnops;
-+	int ret;
-+	u8 tc, bw;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	if (!info->attrs[TSN_ATTR_CBS]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	na = info->attrs[TSN_ATTR_CBS];
-+
-+	if (!tsnops->cbs_set) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -1;
-+	}
-+
-+	ret = NLA_PARSE_NESTED(cbsa, TSN_CBS_ATTR_MAX, na, cbs_policy);
-+	if (ret) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	if (!cbsa[TSN_CBS_ATTR_TC_INDEX]) {
-+		pr_err("tsn: no TSN_CBS_ATTR_TC_INDEX input\n");
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+	tc = nla_get_u8(cbsa[TSN_CBS_ATTR_TC_INDEX]);
-+
-+	if (!cbsa[TSN_CBS_ATTR_BW]) {
-+		pr_err("tsn: no TSN_CBS_ATTR_BW input\n");
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	bw = nla_get_u8(cbsa[TSN_CBS_ATTR_BW]);
-+	if (bw > 100) {
-+		pr_err("tsn: TSN_CBS_ATTR_BW isn't in the range of 0~100\n");
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	ret = tsnops->cbs_set(netdev, tc, bw);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+		return ret;
-+	}
-+
-+	tsn_simple_reply(info, TSN_CMD_REPLY,
-+			 netdev->name, 0);
-+	return 0;
-+}
-+
-+static int tsn_cbs_get(struct sk_buff *skb, struct genl_info *info)
-+{
-+	struct nlattr *na, *cbsattr;
-+	struct nlattr *cbsa[TSN_CBS_ATTR_MAX + 1];
-+	struct net_device *netdev;
-+	const struct tsn_ops *tsnops;
-+	struct sk_buff *rep_skb;
-+	int ret;
-+	struct genlmsghdr *genlhdr;
-+	u8 tc;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	if (!info->attrs[TSN_ATTR_CBS]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	if (!tsnops->cbs_get) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -1;
-+	}
-+
-+	na = info->attrs[TSN_ATTR_CBS];
-+	ret = NLA_PARSE_NESTED(cbsa, TSN_CBS_ATTR_MAX, na, cbs_policy);
-+	if (ret) {
-+		pr_err("tsn: parse value TSN_CBS_ATTR_MAX error.");
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	/* Get status data from device */
-+	genlhdr = info->genlhdr;
-+
-+	/* Form netlink reply data */
-+	ret = tsn_prepare_reply(info, genlhdr->cmd, &rep_skb,
-+				NLMSG_ALIGN(MAX_ATTR_SIZE));
-+	if (ret < 0)
-+		return ret;
-+
-+	if (nla_put_string(rep_skb, TSN_ATTR_IFNAME, netdev->name))
-+		return -EMSGSIZE;
-+
-+	cbsattr = nla_nest_start_noflag(rep_skb, TSN_ATTR_CBS);
-+	if (!cbsattr)
-+		return -EMSGSIZE;
-+
-+	if (!cbsa[TSN_CBS_ATTR_TC_INDEX]) {
-+		pr_err("tsn: must to specify the TSN_CBS_ATTR_TC_INDEX\n");
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+	tc = nla_get_u8(cbsa[TSN_CBS_ATTR_TC_INDEX]);
-+
-+	ret = tsnops->cbs_get(netdev, tc);
-+	if (ret < 0) {
-+		pr_err("tsn: cbs_get return error\n");
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+		return ret;
-+	}
-+
-+	if (nla_put_u8(rep_skb, TSN_CBS_ATTR_BW, ret & 0XF))
-+		return -EMSGSIZE;
-+
-+	nla_nest_end(rep_skb, cbsattr);
-+	return tsn_send_reply(rep_skb, info);
-+}
-+
-+static int cmd_qbu_set(struct genl_info *info)
-+{
-+	struct nlattr *na;
-+	struct nlattr *qbua[TSN_QBU_ATTR_MAX + 1];
-+	struct net_device *netdev;
-+	const struct tsn_ops *tsnops;
-+	int ret;
-+	u8 preemptible = 0;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	if (!info->attrs[TSN_ATTR_QBU]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	na = info->attrs[TSN_ATTR_QBU];
-+
-+	ret = NLA_PARSE_NESTED(qbua, TSN_QBU_ATTR_MAX, na, qbu_policy);
-+	if (ret) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	if (qbua[TSN_QBU_ATTR_ADMIN_STATE])
-+		preemptible = nla_get_u8(qbua[TSN_QBU_ATTR_ADMIN_STATE]);
-+	else
-+		pr_info("No preemptible TSN_QBU_ATTR_ADMIN_STATE config!\n");
-+
-+	if (!tsnops->qbu_set) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -EINVAL;
-+	}
-+
-+	ret = tsnops->qbu_set(netdev, preemptible);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+		return ret;
-+	}
-+
-+	tsn_simple_reply(info, TSN_CMD_REPLY,
-+			 netdev->name, 0);
-+	return 0;
-+}
-+
-+static int tsn_qbu_set(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME])
-+		return cmd_qbu_set(info);
-+
-+	return -1;
-+}
-+
-+static int cmd_qbu_get_status(struct genl_info *info)
-+{
-+	struct nlattr *qbuattr;
-+	struct net_device *netdev;
-+	const struct tsn_ops *tsnops;
-+	struct sk_buff *rep_skb;
-+	int ret;
-+	struct genlmsghdr *genlhdr;
-+	struct tsn_preempt_status pps;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	/* Get status data from device */
-+	genlhdr = info->genlhdr;
-+
-+	memset(&pps, 0, sizeof(struct tsn_preempt_status));
-+
-+	if (!tsnops->qbu_get) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -1;
-+	}
-+
-+	ret = tsnops->qbu_get(netdev, &pps);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+		return ret;
-+	}
-+
-+	/* Form netlink reply data */
-+	ret = tsn_prepare_reply(info, genlhdr->cmd,
-+				&rep_skb, NLMSG_ALIGN(MAX_ATTR_SIZE));
-+	if (ret < 0)
-+		return ret;
-+
-+	if (nla_put_string(rep_skb, TSN_ATTR_IFNAME, netdev->name))
-+		return -EMSGSIZE;
-+
-+	qbuattr = nla_nest_start_noflag(rep_skb, TSN_ATTR_QBU);
-+	if (!qbuattr)
-+		return -EMSGSIZE;
-+
-+	if (nla_put_u8(rep_skb, TSN_QBU_ATTR_ADMIN_STATE, pps.admin_state) ||
-+	    nla_put_u32(rep_skb,
-+			TSN_QBU_ATTR_HOLD_ADVANCE, pps.hold_advance) ||
-+	    nla_put_u32(rep_skb,
-+			TSN_QBU_ATTR_RELEASE_ADVANCE, pps.release_advance))
-+		return -EMSGSIZE;
-+
-+	if (pps.preemption_active) {
-+		if (nla_put_flag(rep_skb, TSN_QBU_ATTR_ACTIVE))
-+			return -EMSGSIZE;
-+	}
-+
-+	if (nla_put_u8(rep_skb, TSN_QBU_ATTR_HOLD_REQUEST, pps.hold_request))
-+		return -EMSGSIZE;
-+
-+	nla_nest_end(rep_skb, qbuattr);
-+
-+	return tsn_send_reply(rep_skb, info);
-+}
-+
-+static int tsn_qbu_get_status(struct sk_buff *skb, struct genl_info *info)
-+{
-+	if (info->attrs[TSN_ATTR_IFNAME])
-+		return cmd_qbu_get_status(info);
-+
-+	return -1;
-+}
-+
-+static int tsn_tsd_set(struct sk_buff *skb, struct genl_info *info)
-+{
-+	struct nlattr *na;
-+	struct nlattr *ntsd[TSN_TSD_ATTR_MAX + 1];
-+	struct net_device *netdev;
-+	const struct tsn_ops *tsnops;
-+	struct tsn_tsd tsd;
-+	int ret;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	memset(&tsd, 0, sizeof(struct tsn_tsd));
-+
-+	if (!info->attrs[TSN_ATTR_TSD]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	na = info->attrs[TSN_ATTR_TSD];
-+
-+	ret = NLA_PARSE_NESTED(ntsd, TSN_TSD_ATTR_MAX, na, tsd_policy);
-+	if (ret) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	if (!tsnops->tsd_set) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -EINVAL;
-+	}
-+
-+	if (nla_get_flag(ntsd[TSN_TSD_ATTR_DISABLE])) {
-+		tsd.enable = false;
-+	} else {
-+		if (ntsd[TSN_TSD_ATTR_PERIOD])
-+			tsd.period = nla_get_u32(ntsd[TSN_TSD_ATTR_PERIOD]);
-+
-+		if (!tsd.period) {
-+			tsn_simple_reply(info, TSN_CMD_REPLY,
-+					 netdev->name, -EINVAL);
-+			return -EINVAL;
-+		}
-+
-+		if (ntsd[TSN_TSD_ATTR_MAX_FRM_NUM])
-+			tsd.maxFrameNum =
-+				nla_get_u32(ntsd[TSN_TSD_ATTR_MAX_FRM_NUM]);
-+
-+		if (ntsd[TSN_TSD_ATTR_SYN_IMME])
-+			tsd.syn_flag = 2;
-+		else
-+			tsd.syn_flag = 1;
-+
-+		tsd.enable = true;
-+	}
-+
-+	ret = tsnops->tsd_set(netdev, &tsd);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+		return ret;
-+	}
-+
-+	tsn_simple_reply(info, TSN_CMD_REPLY,
-+			 netdev->name, 0);
-+	return 0;
-+}
-+
-+static int tsn_tsd_get(struct sk_buff *skb, struct genl_info *info)
-+{
-+	struct nlattr *na, *tsdattr;
-+	struct nlattr *tsda[TSN_TSD_ATTR_MAX + 1];
-+	struct net_device *netdev;
-+	const struct tsn_ops *tsnops;
-+	struct sk_buff *rep_skb;
-+	int ret;
-+	struct genlmsghdr *genlhdr;
-+	struct tsn_tsd_status tts;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	if (!info->attrs[TSN_ATTR_TSD]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	if (!tsnops->tsd_get) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -1;
-+	}
-+
-+	ret = tsnops->tsd_get(netdev, &tts);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+		return ret;
-+	}
-+
-+	na = info->attrs[TSN_ATTR_TSD];
-+
-+	ret = NLA_PARSE_NESTED(tsda, TSN_TSD_ATTR_MAX,
-+			       na, tsd_policy);
-+	if (ret) {
-+		pr_err("tsn: parse value TSN_TSD_ATTR_MAX error.");
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	/* Get status data from device */
-+	genlhdr = info->genlhdr;
-+
-+	/* Form netlink reply data */
-+	ret = tsn_prepare_reply(info, genlhdr->cmd, &rep_skb,
-+				NLMSG_ALIGN(MAX_ATTR_SIZE));
-+	if (ret < 0)
-+		return ret;
-+
-+	if (nla_put_string(rep_skb, TSN_ATTR_IFNAME, netdev->name))
-+		return -EMSGSIZE;
-+
-+	tsdattr = nla_nest_start_noflag(rep_skb, TSN_ATTR_TSD);
-+	if (!tsdattr)
-+		return -EMSGSIZE;
-+
-+	if (nla_put_u32(rep_skb, TSN_TSD_ATTR_PERIOD, tts.period) ||
-+	    nla_put_u32(rep_skb, TSN_TSD_ATTR_MAX_FRM_NUM, tts.maxFrameNum) ||
-+	    nla_put_u32(rep_skb, TSN_TSD_ATTR_CYCLE_NUM, tts.cycleNum) ||
-+	    nla_put_u32(rep_skb, TSN_TSD_ATTR_LOSS_STEPS, tts.loss_steps) ||
-+	    nla_put_u32(rep_skb, TSN_TSD_ATTR_MAX_FRM_NUM, tts.maxFrameNum))
-+		return -EMSGSIZE;
-+
-+	if (!tts.enable) {
-+		if (nla_put_flag(rep_skb, TSN_TSD_ATTR_DISABLE))
-+			return -EMSGSIZE;
-+	} else {
-+		if (nla_put_flag(rep_skb, TSN_TSD_ATTR_ENABLE))
-+			return -EMSGSIZE;
-+	}
-+
-+	if (tts.flag == 2)
-+		if (nla_put_flag(rep_skb, TSN_TSD_ATTR_SYN_IMME))
-+			return -EMSGSIZE;
-+
-+	nla_nest_end(rep_skb, tsdattr);
-+	return tsn_send_reply(rep_skb, info);
-+}
-+
-+static int tsn_ct_set(struct sk_buff *skb, struct genl_info *info)
-+{
-+	struct nlattr *na;
-+	struct nlattr *cta[TSN_CT_ATTR_MAX + 1];
-+	struct net_device *netdev;
-+	const struct tsn_ops *tsnops;
-+	int ret;
-+	u8 queue_stat;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	if (!info->attrs[TSN_ATTR_CT]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	na = info->attrs[TSN_ATTR_CT];
-+
-+	if (!tsnops->ct_set) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -1;
-+	}
-+
-+	ret = NLA_PARSE_NESTED(cta, TSN_CT_ATTR_MAX,
-+			       na, ct_policy);
-+	if (ret) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	queue_stat = nla_get_u8(cta[TSN_CT_ATTR_QUEUE_STATE]);
-+
-+	ret = tsnops->ct_set(netdev, queue_stat);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+		return ret;
-+	}
-+
-+	tsn_simple_reply(info, TSN_CMD_REPLY,
-+			 netdev->name, 0);
-+	return 0;
-+}
-+
-+static int tsn_cbgen_set(struct sk_buff *skb, struct genl_info *info)
-+{
-+	struct nlattr *na;
-+	struct nlattr *cbgena[TSN_CBGEN_ATTR_MAX + 1];
-+	struct net_device *netdev;
-+	const struct tsn_ops *tsnops;
-+	int ret;
-+	u32 index;
-+	struct tsn_seq_gen_conf sg_conf;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	if (!info->attrs[TSN_ATTR_CBGEN]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	na = info->attrs[TSN_ATTR_CBGEN];
-+
-+	if (!tsnops->cbgen_set) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -1;
-+	}
-+
-+	ret = NLA_PARSE_NESTED(cbgena, TSN_CBGEN_ATTR_MAX,
-+			       na, cbgen_policy);
-+	if (ret) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	index = nla_get_u32(cbgena[TSN_CBGEN_ATTR_INDEX]);
-+
-+	memset(&sg_conf, 0, sizeof(struct tsn_seq_gen_conf));
-+	sg_conf.iport_mask = nla_get_u8(cbgena[TSN_CBGEN_ATTR_PORT_MASK]);
-+	sg_conf.split_mask = nla_get_u8(cbgena[TSN_CBGEN_ATTR_SPLIT_MASK]);
-+	sg_conf.seq_len = nla_get_u8(cbgena[TSN_CBGEN_ATTR_SEQ_LEN]);
-+	sg_conf.seq_num = nla_get_u32(cbgena[TSN_CBGEN_ATTR_SEQ_NUM]);
-+
-+	ret = tsnops->cbgen_set(netdev, index, &sg_conf);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+		return ret;
-+	}
-+
-+	tsn_simple_reply(info, TSN_CMD_REPLY,
-+			 netdev->name, 0);
-+	return 0;
-+}
-+
-+static int tsn_cbrec_set(struct sk_buff *skb, struct genl_info *info)
-+{
-+	struct nlattr *na;
-+	struct nlattr *cbreca[TSN_CBREC_ATTR_MAX + 1];
-+	struct net_device *netdev;
-+	const struct tsn_ops *tsnops;
-+	int ret;
-+	u32 index;
-+	struct tsn_seq_rec_conf sr_conf;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	if (!info->attrs[TSN_ATTR_CBREC]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	na = info->attrs[TSN_ATTR_CBREC];
-+
-+	if (!tsnops->cbrec_set) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -1;
-+	}
-+
-+	ret = NLA_PARSE_NESTED(cbreca, TSN_CBREC_ATTR_MAX,
-+			       na, cbrec_policy);
-+	if (ret) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	index = nla_get_u32(cbreca[TSN_CBREC_ATTR_INDEX]);
-+
-+	memset(&sr_conf, 0, sizeof(struct tsn_seq_rec_conf));
-+	sr_conf.seq_len = nla_get_u8(cbreca[TSN_CBREC_ATTR_SEQ_LEN]);
-+	sr_conf.his_len = nla_get_u8(cbreca[TSN_CBREC_ATTR_HIS_LEN]);
-+	sr_conf.rtag_pop_en = nla_get_flag(cbreca[TSN_CBREC_ATTR_TAG_POP_EN]);
-+
-+	ret = tsnops->cbrec_set(netdev, index, &sr_conf);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+		return ret;
-+	}
-+
-+	tsn_simple_reply(info, TSN_CMD_REPLY,
-+			 netdev->name, 0);
-+	return 0;
-+}
-+
-+static int tsn_cbstatus_get(struct sk_buff *skb, struct genl_info *info)
-+{
-+	struct nlattr *na;
-+	struct nlattr *cba[TSN_CBSTAT_ATTR_MAX + 1];
-+	struct nlattr *cbattr;
-+	struct net_device *netdev;
-+	const struct tsn_ops *tsnops;
-+	struct sk_buff *rep_skb;
-+	int ret;
-+	unsigned int index;
-+	struct genlmsghdr *genlhdr;
-+	struct tsn_cb_status cbstat;
-+	struct tsn_port *port;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	/* Get status data from device */
-+	genlhdr = info->genlhdr;
-+
-+	memset(&cbstat, 0, sizeof(struct tsn_cb_status));
-+
-+	if (!tsnops->cb_get) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -1;
-+	}
-+
-+	na = info->attrs[TSN_ATTR_CBSTAT];
-+	ret = NLA_PARSE_NESTED(cba, TSN_CBSTAT_ATTR_MAX,
-+			       na, cbstat_policy);
-+	if (ret) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	index = nla_get_u32(cba[TSN_CBSTAT_ATTR_INDEX]);
-+
-+	ret = tsnops->cb_get(netdev, index, &cbstat);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+		return ret;
-+	}
-+
-+	/* Form netlink reply data */
-+	ret = tsn_prepare_reply(info, genlhdr->cmd,
-+				&rep_skb, NLMSG_ALIGN(MAX_ATTR_SIZE));
-+	if (ret < 0)
-+		return ret;
-+
-+	if (nla_put_string(rep_skb, TSN_ATTR_IFNAME, netdev->name))
-+		return -EMSGSIZE;
-+
-+	cbattr = nla_nest_start_noflag(rep_skb, TSN_ATTR_CBSTAT);
-+	if (!cbattr)
-+		return -EMSGSIZE;
-+
-+	if (nla_put_u8(rep_skb, TSN_CBSTAT_ATTR_GEN_REC, cbstat.gen_rec) ||
-+	    nla_put_u8(rep_skb, TSN_CBSTAT_ATTR_ERR, cbstat.err) ||
-+	    nla_put_u32(rep_skb, TSN_CBSTAT_ATTR_SEQ_NUM,
-+			cbstat.seq_num) ||
-+	    nla_put_u8(rep_skb, TSN_CBSTAT_ATTR_SEQ_LEN, cbstat.seq_len) ||
-+	    nla_put_u8(rep_skb, TSN_CBSTAT_ATTR_SPLIT_MASK,
-+		       cbstat.split_mask) ||
-+	    nla_put_u8(rep_skb, TSN_CBSTAT_ATTR_PORT_MASK,
-+		       cbstat.iport_mask) ||
-+	    nla_put_u8(rep_skb, TSN_CBSTAT_ATTR_HIS_LEN, cbstat.his_len) ||
-+	    nla_put_u32(rep_skb, TSN_CBSTAT_ATTR_SEQ_HIS,
-+			cbstat.seq_his))
-+		return -EMSGSIZE;
-+
-+	nla_nest_end(rep_skb, cbattr);
-+
-+	return tsn_send_reply(rep_skb, info);
-+}
-+
-+static int tsn_dscp_set(struct sk_buff *skb, struct genl_info *info)
-+{
-+	struct nlattr *na;
-+	struct nlattr *dscpa[TSN_DSCP_ATTR_MAX + 1];
-+	struct net_device *netdev;
-+	const struct tsn_ops *tsnops;
-+	int ret;
-+	bool enable = 0;
-+	struct tsn_port *port;
-+	int dscp_ix;
-+	struct tsn_qos_switch_dscp_conf dscp_conf;
-+
-+	port = tsn_init_check(info, &netdev);
-+	if (!port)
-+		return -ENODEV;
-+
-+	tsnops = port->tsnops;
-+
-+	if (!info->attrs[TSN_ATTR_DSCP]) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	na = info->attrs[TSN_ATTR_DSCP];
-+
-+	if (!tsnops->dscp_set) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EPERM);
-+		return -1;
-+	}
-+
-+	ret = NLA_PARSE_NESTED(dscpa, TSN_DSCP_ATTR_MAX,
-+			       na, dscp_policy);
-+	if (ret) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, -EINVAL);
-+		return -EINVAL;
-+	}
-+
-+	enable = 1;
-+	if (dscpa[TSN_DSCP_ATTR_DISABLE])
-+		enable = 0;
-+	dscp_ix = nla_get_u32(dscpa[TSN_DSCP_ATTR_INDEX]);
-+	dscp_conf.cos = nla_get_u32(dscpa[TSN_DSCP_ATTR_COS]);
-+	dscp_conf.dpl = nla_get_u32(dscpa[TSN_DSCP_ATTR_DPL]);
-+	ret = tsnops->dscp_set(netdev, enable, dscp_ix, &dscp_conf);
-+	if (ret < 0) {
-+		tsn_simple_reply(info, TSN_CMD_REPLY,
-+				 netdev->name, ret);
-+		return ret;
-+	}
-+
-+	tsn_simple_reply(info, TSN_CMD_REPLY,
-+			 netdev->name, 0);
-+
-+	return 0;
-+}
-+
-+static const struct genl_ops tsnnl_ops[] = {
-+	{
-+		.cmd		= TSN_CMD_ECHO,
-+		.doit		= tsn_echo_cmd,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_CAP_GET,
-+		.doit		= tsn_cap_get,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_QBV_SET,
-+		.doit		= tsn_qbv_set,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_QBV_GET,
-+		.doit		= tsn_qbv_get,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_QBV_GET_STATUS,
-+		.doit		= tsn_qbv_status_get,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_CB_STREAMID_SET,
-+		.doit		= tsn_cb_streamid_set,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_CB_STREAMID_GET,
-+		.doit		= tsn_cb_streamid_get,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_CB_STREAMID_GET_COUNTS,
-+		.doit		= tsn_cb_streamid_counters_get,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_QCI_CAP_GET,
-+		.doit		= tsn_qci_cap_get,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_QCI_SFI_SET,
-+		.doit		= tsn_qci_sfi_set,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_QCI_SFI_GET,
-+		.doit		= tsn_qci_sfi_get,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_QCI_SFI_GET_COUNTS,
-+		.doit		= tsn_qci_sfi_counters_get,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_QCI_SGI_SET,
-+		.doit		= tsn_qci_sgi_set,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_QCI_SGI_GET,
-+		.doit		= tsn_qci_sgi_get,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_QCI_SGI_GET_STATUS,
-+		.doit		= tsn_qci_sgi_status_get,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_QCI_FMI_SET,
-+		.doit		= tsn_qci_fmi_set,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_QCI_FMI_GET,
-+		.doit		= tsn_qci_fmi_get,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_CBS_SET,
-+		.doit		= tsn_cbs_set,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_CBS_GET,
-+		.doit		= tsn_cbs_get,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_QBU_SET,
-+		.doit		= tsn_qbu_set,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_QBU_GET_STATUS,
-+		.doit		= tsn_qbu_get_status,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_TSD_SET,
-+		.doit		= tsn_tsd_set,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_TSD_GET,
-+		.doit		= tsn_tsd_get,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_CT_SET,
-+		.doit		= tsn_ct_set,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_CBGEN_SET,
-+		.doit		= tsn_cbgen_set,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_CBREC_SET,
-+		.doit		= tsn_cbrec_set,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_CBSTAT_GET,
-+		.doit		= tsn_cbstatus_get,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+	{
-+		.cmd		= TSN_CMD_DSCP_SET,
-+		.doit		= tsn_dscp_set,
-+		.flags		= GENL_ADMIN_PERM,
-+	},
-+};
-+
-+static const struct genl_multicast_group tsn_mcgrps[] = {
-+	[TSN_MCGRP_QBV] = { .name = TSN_MULTICAST_GROUP_QBV},
-+	[TSN_MCGRP_QCI] = { .name = TSN_MULTICAST_GROUP_QCI},
-+};
-+
-+static struct genl_family tsn_family = {
-+	.name		= TSN_GENL_NAME,
-+	.version	= TSN_GENL_VERSION,
-+	.maxattr	= TSN_CMD_ATTR_MAX,
-+	.module		= THIS_MODULE,
-+	.netnsok	= true,
-+	.ops		= tsnnl_ops,
-+	.n_ops		= ARRAY_SIZE(tsnnl_ops),
-+	.mcgrps		= tsn_mcgrps,
-+	.n_mcgrps	= ARRAY_SIZE(tsn_mcgrps),
-+};
-+
-+int tsn_port_register(struct net_device *netdev,
-+		      struct tsn_ops *tsnops, u16 groupid)
-+{
-+	struct tsn_port *port;
-+
-+	if (list_empty(&port_list)) {
-+		INIT_LIST_HEAD(&port_list);
-+	} else {
-+		list_for_each_entry(port, &port_list, list) {
-+			if (port->netdev == netdev) {
-+				pr_info("TSN device already registered!\n");
-+				return -1;
-+			}
-+		}
-+	}
-+
-+	port = kzalloc(sizeof(*port), GFP_KERNEL);
-+	if (!port)
-+		return -1;
-+
-+	port->netdev = netdev;
-+	port->groupid = groupid;
-+	port->tsnops = tsnops;
-+	port->nd.dev = netdev;
-+
-+	if (groupid < GROUP_OFFSET_SWITCH)
-+		port->type = TSN_ENDPOINT;
-+	else
-+		port->type = TSN_SWITCH;
-+
-+	list_add_tail(&port->list, &port_list);
-+
-+	if (tsnops && tsnops->device_init)
-+		port->tsnops->device_init(netdev);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(tsn_port_register);
-+
-+void tsn_port_unregister(struct net_device *netdev)
-+{
-+	struct tsn_port *p;
-+
-+	list_for_each_entry(p, &port_list, list) {
-+		if (!p || !p->netdev)
-+			continue;
-+		if (p->netdev == netdev) {
-+			if (p->tsnops->device_deinit)
-+				p->tsnops->device_deinit(netdev);
-+			list_del(&p->list);
-+			kfree(p);
-+			break;
-+		}
-+	}
-+}
-+EXPORT_SYMBOL(tsn_port_unregister);
-+
-+static int tsn_multicast_to_user(unsigned long event,
-+				 struct tsn_notifier_info *tsn_info)
-+{
-+	struct sk_buff *skb;
-+	struct genlmsghdr *nlh;
-+	int res;
-+	struct tsn_qbv_conf *qbvdata;
-+
-+	/* If new attributes are added, please revisit this allocation */
-+	skb = genlmsg_new(sizeof(*tsn_info), GFP_KERNEL);
-+	if (!skb) {
-+		pr_err("Allocation failure.\n");
-+		return -ENOMEM;
-+	}
-+
-+	switch (event) {
-+	case TSN_QBV_CONFIGCHANGETIME_ARRIVE:
-+		nlh = genlmsg_put(skb, 0, 1, &tsn_family,
-+				  GFP_KERNEL, TSN_CMD_QBV_SET);
-+		qbvdata = &tsn_info->ntdata.qbv_notify;
-+		res = NLA_PUT_U64(skb, TSN_QBV_ATTR_CTRL_BASETIME,
-+				  qbvdata->admin.base_time);
-+
-+		if (res) {
-+			pr_err("put data failure!\n");
-+			goto done;
-+		}
-+
-+		res = nla_put_u32(skb, TSN_QBV_ATTR_CTRL_CYCLETIME,
-+				  qbvdata->admin.cycle_time);
-+		if (res) {
-+			pr_err("put data failure!\n");
-+			goto done;
-+		}
-+
-+		if (qbvdata->gate_enabled)
-+			res = nla_put_flag(skb, TSN_QBV_ATTR_ENABLE +
-+					   TSN_QBV_ATTR_CTRL_MAX);
-+		else
-+			res = nla_put_flag(skb, TSN_QBV_ATTR_DISABLE +
-+					   TSN_QBV_ATTR_CTRL_MAX);
-+		if (res) {
-+			pr_err("put data failure!\n");
-+			goto done;
-+		}
-+
-+		res = nla_put_u32(skb, TSN_QBV_ATTR_CTRL_UNSPEC,
-+				  tsn_info->dev->ifindex);
-+		if (res) {
-+			pr_err("put data failure!\n");
-+			goto done;
-+		}
-+
-+		break;
-+	default:
-+		pr_info("event not supportted!\n");
-+		break;
-+	}
-+
-+	(void)genlmsg_end(skb, nlh);
-+
-+	res = genlmsg_multicast_allns(&tsn_family, skb, 0,
-+				      TSN_MCGRP_QBV, GFP_KERNEL);
-+	skb = NULL;
-+	if (res && res != -ESRCH) {
-+		pr_err("genlmsg_multicast_allns error: %d\n", res);
-+		goto done;
-+	}
-+
-+	if (res == -ESRCH)
-+		res = 0;
-+
-+done:
-+	if (skb) {
-+		nlmsg_free(skb);
-+		skb = NULL;
-+	}
-+
-+	return res;
-+}
-+
-+/* called with RTNL or RCU */
-+static int tsn_event(struct notifier_block *unused,
-+		     unsigned long event, void *ptr)
-+{
-+	struct tsn_notifier_info *tsn_info;
-+	int err = NOTIFY_DONE;
-+
-+	switch (event) {
-+	case TSN_QBV_CONFIGCHANGETIME_ARRIVE:
-+		tsn_info = ptr;
-+		err = tsn_multicast_to_user(event, tsn_info);
-+		if (err) {
-+			err = notifier_from_errno(err);
-+			break;
-+		}
-+		break;
-+	default:
-+		pr_info("event not supportted!\n");
-+		break;
-+	}
-+
-+	return err;
-+}
-+
-+static struct notifier_block tsn_notifier = {
-+	.notifier_call = tsn_event,
-+};
-+
-+static int __init tsn_genetlink_init(void)
-+{
-+	int ret;
-+
-+	pr_info("tsn generic netlink module v%d init...\n", TSN_GENL_VERSION);
-+
-+	ret = genl_register_family(&tsn_family);
-+
-+	if (ret != 0) {
-+		pr_info("failed to init tsn generic netlink example module\n");
-+		return ret;
-+	}
-+
-+	register_tsn_notifier(&tsn_notifier);
-+
-+	return 0;
-+}
-+
-+static void __exit tsn_genetlink_exit(void)
-+{
-+	int ret;
-+
-+	ret = genl_unregister_family(&tsn_family);
-+	if (ret != 0)
-+		pr_info("failed to unregister family:%i\n", ret);
-+
-+	unregister_tsn_notifier(&tsn_notifier);
-+}
-+
-+module_init(tsn_genetlink_init);
-+module_exit(tsn_genetlink_exit);
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/layerscape/patches-5.4/701-net-0335-net-tsn-fix-headfile-voliates-the-new-rule.patch b/target/linux/layerscape/patches-5.4/701-net-0335-net-tsn-fix-headfile-voliates-the-new-rule.patch
deleted file mode 100644
index e732f14476..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0335-net-tsn-fix-headfile-voliates-the-new-rule.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 6e9f130a3be14a92a16b2332f6c92f873ebb8af5 Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Tue, 3 Sep 2019 15:57:49 +0800
-Subject: [PATCH] net: tsn: fix headfile voliates the new rule
-
-After commit
-622445541b75 ("kbuild: detect missing "WITH Linux-syscall-note" for uapi headers")
-the headfile must explicitly include "WITH Linux-syscall-note".
-
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- include/uapi/linux/tsn.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/uapi/linux/tsn.h
-+++ b/include/uapi/linux/tsn.h
-@@ -1,4 +1,4 @@
--/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) WITH Linux-syscall-note */
- /* Copyright 2017-2019 NXP */
- 
- #ifndef __UAPI_GENL_TSN_H
diff --git a/target/linux/layerscape/patches-5.4/701-net-0336-enetc-add-support-Credit-Based-Shaper-CBS-for-hardwa.patch b/target/linux/layerscape/patches-5.4/701-net-0336-enetc-add-support-Credit-Based-Shaper-CBS-for-hardwa.patch
deleted file mode 100644
index 8b59f994b2..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0336-enetc-add-support-Credit-Based-Shaper-CBS-for-hardwa.patch
+++ /dev/null
@@ -1,231 +0,0 @@
-From 3426e5e4339f124f00eef8815b56a80481364550 Mon Sep 17 00:00:00 2001
-From: Po Liu <po.liu@nxp.com>
-Date: Mon, 25 Nov 2019 05:56:56 +0000
-Subject: [PATCH] enetc: add support Credit Based Shaper(CBS) for hardware
- offload
-
-The ENETC hardware support the Credit Based Shaper(CBS) which part
-of the IEEE-802.1Qav. The CBS driver was loaded by the sch_cbs
-interface when set in the QOS in the kernel.
-
-Here is an example command to set 20Mbits bandwidth in 1Gbits port
-for taffic class 7:
-
-tc qdisc add dev eth0 root handle 1: mqprio \
-	   num_tc 8 map 0 1 2 3 4 5 6 7 hw 1
-
-tc qdisc replace dev eth0 parent 1:8 cbs \
-	   locredit -1470 hicredit 30 \
-	   sendslope -980000 idleslope 20000 offload 1
-
-Signed-off-by: Po Liu <Po.Liu@nxp.com>
-Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
-Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/freescale/enetc/Kconfig     |   4 +-
- drivers/net/ethernet/freescale/enetc/enetc.c     |   2 +
- drivers/net/ethernet/freescale/enetc/enetc.h     |   2 +
- drivers/net/ethernet/freescale/enetc/enetc_hw.h  |   4 +
- drivers/net/ethernet/freescale/enetc/enetc_qos.c | 128 +++++++++++++++++++++++
- 5 files changed, 138 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/enetc/Kconfig
-+++ b/drivers/net/ethernet/freescale/enetc/Kconfig
-@@ -53,10 +53,10 @@ config FSL_ENETC_HW_TIMESTAMPING
- 
- config FSL_ENETC_QOS
- 	bool "ENETC hardware Time-sensitive Network support"
--	depends on (FSL_ENETC || FSL_ENETC_VF) && NET_SCH_TAPRIO
-+	depends on (FSL_ENETC || FSL_ENETC_VF) && (NET_SCH_TAPRIO || NET_SCH_CBS)
- 	help
- 	  There are Time-Sensitive Network(TSN) capabilities(802.1Qbv/802.1Qci
- 	  /802.1Qbu etc.) supported by ENETC. These TSN capabilities can be set
- 	  enable/disable from user space via Qos commands(tc). In the kernel
- 	  side, it can be loaded by Qos driver. Currently, it is only support
--	  taprio(802.1Qbv).
-+	  taprio(802.1Qbv) and Credit Based Shaper(802.1Qbu).
---- a/drivers/net/ethernet/freescale/enetc/enetc.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
-@@ -1516,6 +1516,8 @@ int enetc_setup_tc(struct net_device *nd
- 		return enetc_setup_tc_mqprio(ndev, type_data);
- 	case TC_SETUP_QDISC_TAPRIO:
- 		return enetc_setup_tc_taprio(ndev, type_data);
-+	case TC_SETUP_QDISC_CBS:
-+		return enetc_setup_tc_cbs(ndev, type_data);
- 	default:
- 		return -EOPNOTSUPP;
- 	}
---- a/drivers/net/ethernet/freescale/enetc/enetc.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc.h
-@@ -260,7 +260,9 @@ int enetc_send_cmd(struct enetc_si *si,
- #ifdef CONFIG_FSL_ENETC_QOS
- int enetc_setup_tc_taprio(struct net_device *ndev, void *type_data);
- void enetc_sched_speed_set(struct net_device *ndev);
-+int enetc_setup_tc_cbs(struct net_device *ndev, void *type_data);
- #else
- #define enetc_setup_tc_taprio(ndev, type_data) -EOPNOTSUPP
- #define enetc_sched_speed_set(ndev) (void)0
-+#define enetc_setup_tc_cbs(ndev, type_data) -EOPNOTSUPP
- #endif
---- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-@@ -185,6 +185,8 @@ enum enetc_bdr_type {TX, RX};
- #define ENETC_PSICFGR0_SIVC(bmp)	(((bmp) & 0xff) << 24) /* VLAN_TYPE */
- 
- #define ENETC_PTCCBSR0(n)	(0x1110 + (n) * 8) /* n = 0 to 7*/
-+#define ENETC_CBSE		BIT(31)
-+#define ENETC_CBS_BW_MASK	GENMASK(6, 0)
- #define ENETC_PTCCBSR1(n)	(0x1114 + (n) * 8) /* n = 0 to 7*/
- #define ENETC_RSSHASH_KEY_SIZE	40
- #define ENETC_PRSSCAPR		0x1404
-@@ -679,6 +681,8 @@ struct enetc_cbd {
- 	u8 status_flags;
- };
- 
-+#define ENETC_CLK  400000000ULL
-+
- /* port time gating control register */
- #define ENETC_QBV_PTGCR_OFFSET		0x11a00
- #define ENETC_QBV_TGE			BIT(31)
---- a/drivers/net/ethernet/freescale/enetc/enetc_qos.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
-@@ -4,6 +4,7 @@
- #include "enetc.h"
- 
- #include <net/pkt_sched.h>
-+#include <linux/math64.h>
- 
- static u16 enetc_get_max_gcl_len(struct enetc_hw *hw)
- {
-@@ -170,3 +171,130 @@ int enetc_setup_tc_taprio(struct net_dev
- 
- 	return err;
- }
-+
-+static u32 enetc_get_cbs_enable(struct enetc_hw *hw, u8 tc)
-+{
-+	return enetc_port_rd(hw, ENETC_PTCCBSR0(tc)) & ENETC_CBSE;
-+}
-+
-+static u8 enetc_get_cbs_bw(struct enetc_hw *hw, u8 tc)
-+{
-+	return enetc_port_rd(hw, ENETC_PTCCBSR0(tc)) & ENETC_CBS_BW_MASK;
-+}
-+
-+int enetc_setup_tc_cbs(struct net_device *ndev, void *type_data)
-+{
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	struct tc_cbs_qopt_offload *cbs = type_data;
-+	u32 port_transmit_rate = priv->speed;
-+	u8 tc_nums = netdev_get_num_tc(ndev);
-+	struct enetc_si *si = priv->si;
-+	u32 hi_credit_bit, hi_credit_reg;
-+	u32 max_interference_size;
-+	u32 port_frame_max_size;
-+	u32 tc_max_sized_frame;
-+	u8 tc = cbs->queue;
-+	u8 prio_top, prio_next;
-+	int bw_sum = 0;
-+	u8 bw;
-+
-+	prio_top = netdev_get_prio_tc_map(ndev, tc_nums - 1);
-+	prio_next = netdev_get_prio_tc_map(ndev, tc_nums - 2);
-+
-+	/* Support highest prio and second prio tc in cbs mode */
-+	if (tc != prio_top && tc != prio_next)
-+		return -EOPNOTSUPP;
-+
-+	if (!cbs->enable) {
-+		/* Make sure the other TC that are numerically
-+		 * lower than this TC have been disabled.
-+		 */
-+		if (tc == prio_top &&
-+		    enetc_get_cbs_enable(&si->hw, prio_next)) {
-+			dev_err(&ndev->dev,
-+				"Disable TC%d before disable TC%d\n",
-+				prio_next, tc);
-+			return -EINVAL;
-+		}
-+
-+		enetc_port_wr(&si->hw, ENETC_PTCCBSR1(tc), 0);
-+		enetc_port_wr(&si->hw, ENETC_PTCCBSR0(tc), 0);
-+
-+		return 0;
-+	}
-+
-+	if (cbs->idleslope - cbs->sendslope != port_transmit_rate * 1000L ||
-+	    cbs->idleslope < 0 || cbs->sendslope > 0)
-+		return -EOPNOTSUPP;
-+
-+	port_frame_max_size = ndev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
-+
-+	bw = cbs->idleslope / (port_transmit_rate * 10UL);
-+
-+	/* Make sure the other TC that are numerically
-+	 * higher than this TC have been enabled.
-+	 */
-+	if (tc == prio_next) {
-+		if (!enetc_get_cbs_enable(&si->hw, prio_top)) {
-+			dev_err(&ndev->dev,
-+				"Enable TC%d first before enable TC%d\n",
-+				prio_top, prio_next);
-+			return -EINVAL;
-+		}
-+		bw_sum += enetc_get_cbs_bw(&si->hw, prio_top);
-+	}
-+
-+	if (bw_sum + bw >= 100) {
-+		dev_err(&ndev->dev,
-+			"The sum of all CBS Bandwidth can't exceed 100\n");
-+		return -EINVAL;
-+	}
-+
-+	tc_max_sized_frame = enetc_port_rd(&si->hw, ENETC_PTCMSDUR(tc));
-+
-+	/* For top prio TC, the max_interfrence_size is maxSizedFrame.
-+	 *
-+	 * For next prio TC, the max_interfrence_size is calculated as below:
-+	 *
-+	 *      max_interference_size = M0 + Ma + Ra * M0 / (R0 - Ra)
-+	 *
-+	 *	- RA: idleSlope for AVB Class A
-+	 *	- R0: port transmit rate
-+	 *	- M0: maximum sized frame for the port
-+	 *	- MA: maximum sized frame for AVB Class A
-+	 */
-+
-+	if (tc == prio_top) {
-+		max_interference_size = port_frame_max_size * 8;
-+	} else {
-+		u32 m0, ma, r0, ra;
-+
-+		m0 = port_frame_max_size * 8;
-+		ma = enetc_port_rd(&si->hw, ENETC_PTCMSDUR(prio_top)) * 8;
-+		ra = enetc_get_cbs_bw(&si->hw, prio_top) *
-+			port_transmit_rate * 10000ULL;
-+		r0 = port_transmit_rate * 1000000ULL;
-+		max_interference_size = m0 + ma +
-+			(u32)div_u64((u64)ra * m0, r0 - ra);
-+	}
-+
-+	/* hiCredit bits calculate by:
-+	 *
-+	 * maxSizedFrame * (idleSlope/portTxRate)
-+	 */
-+	hi_credit_bit = max_interference_size * bw / 100;
-+
-+	/* hiCredit bits to hiCredit register need to calculated as:
-+	 *
-+	 * (enetClockFrequency / portTransmitRate) * 100
-+	 */
-+	hi_credit_reg = (u32)div_u64((ENETC_CLK * 100ULL) * hi_credit_bit,
-+				     port_transmit_rate * 1000000ULL);
-+
-+	enetc_port_wr(&si->hw, ENETC_PTCCBSR1(tc), hi_credit_reg);
-+
-+	/* Set bw register and enable this traffic class */
-+	enetc_port_wr(&si->hw, ENETC_PTCCBSR0(tc), bw | ENETC_CBSE);
-+
-+	return 0;
-+}
diff --git a/target/linux/layerscape/patches-5.4/701-net-0337-enetc-add-support-tsn-capabilities-qbv-qci-qbu-cbs.patch b/target/linux/layerscape/patches-5.4/701-net-0337-enetc-add-support-tsn-capabilities-qbv-qci-qbu-cbs.patch
deleted file mode 100644
index dddb32a55c..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0337-enetc-add-support-tsn-capabilities-qbv-qci-qbu-cbs.patch
+++ /dev/null
@@ -1,2911 +0,0 @@
-From bf3f81f3773cc9f6b273d769aca96512780c6189 Mon Sep 17 00:00:00 2001
-From: Po Liu <Po.Liu@nxp.com>
-Date: Tue, 3 Dec 2019 16:52:57 +0800
-Subject: [PATCH] enetc: add support tsn capabilities qbv/qci/qbu/cbs
-
-Support Qbv/Qci/Qbu/Credit Base Shaper etc.
-This patch using the generic netlink adapt layer driver net/tsn/*
-and include/net/tsn.h interface load by user space. The user space
-refer the include/uapi/linux/tsn.h.
-
-Signed-off-by: Po Liu <Po.Liu@nxp.com>
----
- drivers/net/ethernet/freescale/enetc/Kconfig       |   10 +
- drivers/net/ethernet/freescale/enetc/Makefile      |    1 +
- drivers/net/ethernet/freescale/enetc/enetc.c       |   13 +-
- drivers/net/ethernet/freescale/enetc/enetc.h       |   38 +
- .../net/ethernet/freescale/enetc/enetc_ethtool.c   |   59 +
- drivers/net/ethernet/freescale/enetc/enetc_hw.h    |  438 ++++-
- drivers/net/ethernet/freescale/enetc/enetc_pf.c    |   15 +-
- drivers/net/ethernet/freescale/enetc/enetc_tsn.c   | 2049 ++++++++++++++++++++
- 8 files changed, 2614 insertions(+), 9 deletions(-)
- create mode 100644 drivers/net/ethernet/freescale/enetc/enetc_tsn.c
-
---- a/drivers/net/ethernet/freescale/enetc/Kconfig
-+++ b/drivers/net/ethernet/freescale/enetc/Kconfig
-@@ -60,3 +60,13 @@ config FSL_ENETC_QOS
- 	  enable/disable from user space via Qos commands(tc). In the kernel
- 	  side, it can be loaded by Qos driver. Currently, it is only support
- 	  taprio(802.1Qbv) and Credit Based Shaper(802.1Qbu).
-+
-+config ENETC_TSN
-+	bool "TSN Support for NXP ENETC driver"
-+	default n
-+	depends on TSN && FSL_ENETC
-+	help
-+	  This driver supports TSN on Freescale ENETC driver. Provide
-+	  interface to config the tsn capabilities of ENETC. The interface link
-+	  to the /net/tsn/* and include/net/tsn.h. User space refer the
-+	  include/uapi/linux/tsn.h.
---- a/drivers/net/ethernet/freescale/enetc/Makefile
-+++ b/drivers/net/ethernet/freescale/enetc/Makefile
-@@ -6,6 +6,7 @@ obj-$(CONFIG_FSL_ENETC) += fsl-enetc.o
- fsl-enetc-y := enetc_pf.o enetc_mdio.o $(common-objs)
- fsl-enetc-$(CONFIG_PCI_IOV) += enetc_msg.o
- fsl-enetc-$(CONFIG_FSL_ENETC_QOS) += enetc_qos.o
-+fsl-enetc-$(CONFIG_ENETC_TSN) += enetc_tsn.o
- 
- obj-$(CONFIG_FSL_ENETC_VF) += fsl-enetc-vf.o
- fsl-enetc-vf-y := enetc_vf.o $(common-objs)
---- a/drivers/net/ethernet/freescale/enetc/enetc.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
-@@ -145,7 +145,8 @@ static int enetc_map_tx_buffs(struct ene
- 	do_tstamp = (active_offloads & ENETC_F_TX_TSTAMP) &&
- 		    (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP);
- 	tx_swbd->do_tstamp = do_tstamp;
--	tx_swbd->check_wb = tx_swbd->do_tstamp;
-+	tx_swbd->qbv_en = !!(active_offloads & ENETC_F_QBV);
-+	tx_swbd->check_wb = tx_swbd->do_tstamp || tx_swbd->qbv_en;
- 
- 	if (do_vlan || do_tstamp)
- 		flags |= ENETC_TXBD_FLAGS_EX;
-@@ -342,7 +343,7 @@ static void enetc_tstamp_tx(struct sk_bu
- static bool enetc_clean_tx_ring(struct enetc_bdr *tx_ring, int napi_budget)
- {
- 	struct net_device *ndev = tx_ring->ndev;
--	int tx_frm_cnt = 0, tx_byte_cnt = 0;
-+	int tx_frm_cnt = 0, tx_byte_cnt = 0, tx_win_drop = 0;
- 	struct enetc_tx_swbd *tx_swbd;
- 	int i, bds_to_clean;
- 	bool do_tstamp;
-@@ -372,6 +373,10 @@ static bool enetc_clean_tx_ring(struct e
- 						    &tstamp);
- 				do_tstamp = true;
- 			}
-+
-+			if (tx_swbd->qbv_en &&
-+			    txbd->wb.status & ENETC_TXBD_STATS_WIN)
-+				tx_win_drop++;
- 		}
- 
- 		if (likely(tx_swbd->dma))
-@@ -415,6 +420,7 @@ static bool enetc_clean_tx_ring(struct e
- 	tx_ring->next_to_clean = i;
- 	tx_ring->stats.packets += tx_frm_cnt;
- 	tx_ring->stats.bytes += tx_byte_cnt;
-+	tx_ring->stats.win_drop += tx_win_drop;
- 
- 	if (unlikely(tx_frm_cnt && netif_carrier_ok(ndev) &&
- 		     __netif_subqueue_stopped(ndev, tx_ring->index) &&
-@@ -778,6 +784,9 @@ void enetc_get_si_caps(struct enetc_si *
- 
- 	if (val & ENETC_SIPCAPR0_QBV)
- 		si->hw_features |= ENETC_SI_F_QBV;
-+
-+	if (val & ENETC_SIPCAPR0_QBU)
-+		si->hw_features |= ENETC_SI_F_QBU;
- }
- 
- static int enetc_dma_alloc_bdr(struct enetc_bdr *r, size_t bd_size)
---- a/drivers/net/ethernet/freescale/enetc/enetc.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc.h
-@@ -10,6 +10,7 @@
- #include <linux/ethtool.h>
- #include <linux/if_vlan.h>
- #include <linux/phy.h>
-+#include <net/tsn.h>
- 
- #include "enetc_hw.h"
- 
-@@ -24,6 +25,7 @@ struct enetc_tx_swbd {
- 	u8 is_dma_page:1;
- 	u8 check_wb:1;
- 	u8 do_tstamp:1;
-+	u8 qbv_en:1;
- };
- 
- #define ENETC_RX_MAXFRM_SIZE	ENETC_MAC_MAXFRM_SIZE
-@@ -42,6 +44,7 @@ struct enetc_ring_stats {
- 	unsigned int packets;
- 	unsigned int bytes;
- 	unsigned int rx_alloc_errs;
-+	unsigned int win_drop;
- };
- 
- #define ENETC_BDR_DEFAULT_SIZE	1024
-@@ -111,6 +114,28 @@ struct enetc_msg_swbd {
- 	int size;
- };
- 
-+#ifdef CONFIG_ENETC_TSN
-+/* Credit-Based Shaper parameters */
-+struct cbs {
-+	u8 tc;
-+	bool enable;
-+	u8 bw;
-+	u32 hi_credit;
-+	u32 lo_credit;
-+	u32 idle_slope;
-+	u32 send_slope;
-+	u32 tc_max_sized_frame;
-+	u32 max_interfrence_size;
-+};
-+
-+struct enetc_cbs {
-+	u32 port_transmit_rate;
-+	u32 port_max_size_frame;
-+	u8 tc_nums;
-+	struct cbs cbs[0];
-+};
-+#endif
-+
- #define ENETC_REV1	0x1
- enum enetc_errata {
- 	ENETC_ERR_TXCSUM	= BIT(0),
-@@ -119,6 +144,7 @@ enum enetc_errata {
- };
- 
- #define ENETC_SI_F_QBV BIT(0)
-+#define ENETC_SI_F_QBU BIT(1)
- 
- /* PCI IEP device data */
- struct enetc_si {
-@@ -136,6 +162,10 @@ struct enetc_si {
- 	int num_rss; /* number of RSS buckets */
- 	unsigned short pad;
- 	int hw_features;
-+#ifdef CONFIG_ENETC_TSN
-+	struct enetc_cbs *ecbs;
-+#endif
-+
- };
- 
- #define ENETC_SI_ALIGN	32
-@@ -177,6 +207,7 @@ enum enetc_active_offloads {
- 	ENETC_F_RX_TSTAMP	= BIT(0),
- 	ENETC_F_TX_TSTAMP	= BIT(1),
- 	ENETC_F_QBV             = BIT(2),
-+	ENETC_F_QBU             = BIT(3),
- };
- 
- struct enetc_ndev_priv {
-@@ -266,3 +297,10 @@ int enetc_setup_tc_cbs(struct net_device
- #define enetc_sched_speed_set(ndev) (void)0
- #define enetc_setup_tc_cbs(ndev, type_data) -EOPNOTSUPP
- #endif
-+#ifdef CONFIG_ENETC_TSN
-+void enetc_tsn_pf_init(struct net_device *netdev, struct pci_dev *pdev);
-+void enetc_tsn_pf_deinit(struct net_device *netdev);
-+#else
-+#define enetc_tsn_pf_init(netdev, pdev) (void)0
-+#define enetc_tsn_pf_deinit(netdev) (void)0
-+#endif
---- a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
-@@ -187,6 +187,21 @@ static const struct {
- 	{ ENETC_PICDR(3),   "ICM DR3 discarded frames" },
- };
- 
-+static const struct {
-+	int reg;
-+	char name[ETH_GSTRING_LEN];
-+} enetc_pmac_counters[] = {
-+	{ ENETC_PM1_RFRM,   "PMAC rx frames" },
-+	{ ENETC_PM1_RPKT,   "PMAC rx packets" },
-+	{ ENETC_PM1_RDRP,   "PMAC rx dropped packets" },
-+	{ ENETC_PM1_RFRG,   "PMAC rx fragment packets" },
-+	{ ENETC_PM1_TFRM,   "PMAC tx frames" },
-+	{ ENETC_PM1_TERR,   "PMAC tx error frames" },
-+	{ ENETC_PM1_TPKT,   "PMAC tx packets" },
-+	{ ENETC_MAC_MERGE_MMFCRXR,   "MAC merge fragment rx counter" },
-+	{ ENETC_MAC_MERGE_MMFCTXR,   "MAC merge fragment tx counter"},
-+};
-+
- static const char rx_ring_stats[][ETH_GSTRING_LEN] = {
- 	"Rx ring %2d frames",
- 	"Rx ring %2d alloc errors",
-@@ -196,6 +211,10 @@ static const char tx_ring_stats[][ETH_GS
- 	"Tx ring %2d frames",
- };
- 
-+static const char tx_windrop_stats[][ETH_GSTRING_LEN] = {
-+	"Tx window drop %2d frames",
-+};
-+
- static int enetc_get_sset_count(struct net_device *ndev, int sset)
- {
- 	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-@@ -213,6 +232,12 @@ static int enetc_get_sset_count(struct n
- 
- 	len += ARRAY_SIZE(enetc_port_counters);
- 
-+	if (priv->active_offloads & ENETC_F_QBU)
-+		len += ARRAY_SIZE(enetc_pmac_counters);
-+
-+	if (priv->active_offloads & ENETC_F_QBV)
-+		len += ARRAY_SIZE(tx_windrop_stats) * priv->num_tx_rings;
-+
- 	return len;
- }
- 
-@@ -251,6 +276,28 @@ static void enetc_get_strings(struct net
- 				ETH_GSTRING_LEN);
- 			p += ETH_GSTRING_LEN;
- 		}
-+
-+		if (!(priv->active_offloads & ENETC_F_QBU))
-+			break;
-+
-+		for (i = 0; i < ARRAY_SIZE(enetc_pmac_counters); i++) {
-+			strlcpy(p, enetc_pmac_counters[i].name,
-+				ETH_GSTRING_LEN);
-+			p += ETH_GSTRING_LEN;
-+		}
-+
-+		if (!((priv->active_offloads & ENETC_F_QBV)))
-+			break;
-+
-+		for (i = 0; i < priv->num_tx_rings; i++) {
-+			for (j = 0; j < ARRAY_SIZE(tx_windrop_stats); j++) {
-+				snprintf(p, ETH_GSTRING_LEN,
-+					 tx_windrop_stats[j],
-+					 i);
-+				p += ETH_GSTRING_LEN;
-+			}
-+		}
-+
- 		break;
- 	}
- }
-@@ -278,6 +325,18 @@ static void enetc_get_ethtool_stats(stru
- 
- 	for (i = 0; i < ARRAY_SIZE(enetc_port_counters); i++)
- 		data[o++] = enetc_port_rd(hw, enetc_port_counters[i].reg);
-+
-+	if (!(priv->active_offloads & ENETC_F_QBU))
-+		return;
-+
-+	for (i = 0; i < ARRAY_SIZE(enetc_pmac_counters); i++)
-+		data[o++] = enetc_port_rd(hw, enetc_pmac_counters[i].reg);
-+
-+	if (!((priv->active_offloads & ENETC_F_QBV)))
-+		return;
-+
-+	for (i = 0; i < priv->num_tx_rings; i++)
-+		data[o++] = priv->tx_ring[i]->stats.win_drop;
- }
- 
- #define ENETC_RSSHASH_L3 (RXH_L2DA | RXH_VLAN | RXH_L3_PROTO | RXH_IP_SRC | \
---- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-@@ -19,6 +19,7 @@
- #define ENETC_SICTR1	0x1c
- #define ENETC_SIPCAPR0	0x20
- #define ENETC_SIPCAPR0_QBV	BIT(4)
-+#define ENETC_SIPCAPR0_QBU	BIT(3)
- #define ENETC_SIPCAPR0_RSS	BIT(8)
- #define ENETC_SIPCAPR1	0x24
- #define ENETC_SITGTGR	0x30
-@@ -243,10 +244,20 @@ enum enetc_bdr_type {TX, RX};
- #define ENETC_PCS_IF_MODE_SGMII_AN	0x0003
- 
- #define ENETC_PM0_IF_MODE	0x8300
-+#define ENETC_PM1_IF_MODE       0x9300
- #define ENETC_PMO_IFM_RG	BIT(2)
- #define ENETC_PM0_IFM_RLP	(BIT(5) | BIT(11))
- #define ENETC_PM0_IFM_RGAUTO	(BIT(15) | ENETC_PMO_IFM_RG | BIT(1))
- #define ENETC_PM0_IFM_XGMII	BIT(12)
-+#define ENETC_PSIDCAPR		0x1b08
-+#define ENETC_PSIDCAPR_MSK	GENMASK(15, 0)
-+#define ENETC_PSFCAPR		0x1b18
-+#define ENETC_PSFCAPR_MSK	GENMASK(15, 0)
-+#define ENETC_PSGCAPR		0x1b28
-+#define ENETC_PSGCAPR_GCL_MSK	GENMASK(18, 16)
-+#define ENETC_PSGCAPR_SGIT_MSK	GENMASK(15, 0)
-+#define ENETC_PFMCAPR		0x1b38
-+#define ENETC_PFMCAPR_MSK	GENMASK(15, 0)
- 
- /* MAC counters */
- #define ENETC_PM0_REOCT		0x8100
-@@ -300,6 +311,15 @@ enum enetc_bdr_type {TX, RX};
- #define ENETC_PM0_TSCOL		0x82E0
- #define ENETC_PM0_TLCOL		0x82E8
- #define ENETC_PM0_TECOL		0x82F0
-+#define ENETC_PM1_RFRM		0x9120
-+#define ENETC_PM1_RDRP		0x9158
-+#define ENETC_PM1_RPKT		0x9160
-+#define ENETC_PM1_RFRG		0x91B8
-+#define ENETC_PM1_TFRM		0x9220
-+#define ENETC_PM1_TERR		0x9238
-+#define ENETC_PM1_TPKT		0x9260
-+#define ENETC_MAC_MERGE_MMFCRXR	0x1f14
-+#define ENETC_MAC_MERGE_MMFCTXR	0x1f18
- 
- /* Port counters */
- #define ENETC_PICDR(n)		(0x0700 + (n) * 8) /* n = [0..3] */
-@@ -458,6 +478,7 @@ union enetc_tx_bd {
- #define ENETC_TXBD_FLAGS_CSUM	BIT(3)
- #define ENETC_TXBD_FLAGS_EX	BIT(6)
- #define ENETC_TXBD_FLAGS_F	BIT(7)
-+#define ENETC_TXBD_STATS_WIN	BIT(7)
- 
- static inline void enetc_clear_tx_bd(union enetc_tx_bd *txbd)
- {
-@@ -485,6 +506,8 @@ static inline __le16 enetc_txbd_l3_csoff
- #define ENETC_TXBD_L4_UDP	BIT(5)
- #define ENETC_TXBD_L4_TCP	BIT(6)
- 
-+#define enetc_tsn_is_enabled() IS_ENABLED(CONFIG_ENETC_TSN)
-+
- union enetc_rx_bd {
- 	struct {
- 		__le64 addr;
-@@ -631,21 +654,307 @@ enum bdcr_cmd_class {
- 	BDCR_CMD_RFS,
- 	BDCR_CMD_PORT_GCL,
- 	BDCR_CMD_RECV_CLASSIFIER,
-+	BDCR_CMD_STREAM_IDENTIFY,
-+	BDCR_CMD_STREAM_FILTER,
-+	BDCR_CMD_STREAM_GCL,
-+	BDCR_CMD_FLOW_METER,
- 	__BDCR_CMD_MAX_LEN,
- 	BDCR_CMD_MAX_LEN = __BDCR_CMD_MAX_LEN - 1,
- };
- 
-+/* class 7, command 0, Stream Identity Entry Configuration */
-+struct streamid_conf {
-+	__le32	stream_handle;	/* init gate value */
-+	__le32	iports;
-+		u8	id_type;
-+		u8	oui[3];
-+		u8	res[3];
-+		u8	en;
-+};
-+
-+#define ENETC_CBDR_SID_VID_MASK 0xfff
-+#define ENETC_CBDR_SID_VIDM BIT(12)
-+#define ENETC_CBDR_SID_TG_MASK 0xc000
-+/* streamid_conf address point to this data space */
-+struct null_streamid_data {
-+	u8	dmac[6];
-+	u16	vid_vidm_tg;
-+};
-+
-+struct smac_streamid_data {
-+	u8	smac[6];
-+	u16	vid_vidm_tg;
-+};
-+
-+/* class 7, command 1, query config , long format */
-+/* No need structure define */
-+
-+#define ENETC_CDBR_SID_ENABLE	BIT(7)
-+/*  Stream ID Query Response Data Buffer */
-+struct streamid_query_resp {
-+	u32	stream_handle;
-+	u32	input_ports;
-+	u8	id_type;
-+	u8	oui[3];
-+	u8	mac[6];
-+	u16	vid_vidm_tg;
-+	u8	res[3];
-+	u8  en;
-+};
-+
-+/* class 7, command 2, qeury status count, Stream ID query long format */
-+struct streamid_stat_query {
-+	u8	res[12];
-+	__le32 input_ports;
-+};
-+
-+/* Stream Identity Statistics Query */
-+struct streamid_stat_query_resp {
-+	u32	psinl;
-+	u32	psinh;
-+	u64	pspi[32];
-+};
-+
-+#define ENETC_CBDR_SFI_PRI_MASK 0x7
-+#define ENETC_CBDR_SFI_PRIM		BIT(3)
-+#define ENETC_CBDR_SFI_BLOV		BIT(4)
-+#define ENETC_CBDR_SFI_BLEN		BIT(5)
-+#define ENETC_CBDR_SFI_MSDUEN	BIT(6)
-+#define ENETC_CBDR_SFI_FMITEN	BIT(7)
-+#define ENETC_CBDR_SFI_ENABLE	BIT(7)
-+/* class 8, command 0, Stream Filter Instance, Short Format */
-+struct sfi_conf {
-+	__le32	stream_handle;
-+		u8	multi;
-+		u8	res[2];
-+		u8	sthm;
-+	/* Max Service Data Unit or Flow Meter Instance Table index.
-+	 * Depending on the value of FLT this represents either Max
-+	 * Service Data Unit (max frame size) allowed by the filter
-+	 * entry or is an index into the Flow Meter Instance table
-+	 * index identifying the policer which will be used to police
-+	 * it.
-+	 */
-+	__le16	fm_inst_table_index;
-+	__le16	msdu;
-+	__le16	sg_inst_table_index;
-+		u8	res1[2];
-+	__le32	input_ports;
-+		u8	res2[3];
-+		u8	en;
-+};
-+
-+/* class 8, command 1, Stream Filter Instance, write back, short Format */
-+struct sfi_query {
-+		u32	stream_handle;
-+		u8	multi;
-+		u8	res[2];
-+		u8	sthm;
-+		u16	fm_inst_table_index;
-+		u16	msdu;
-+		u16	sg_inst_table_index;
-+		u8	res1[2];
-+		u32	input_ports;
-+		u8	res2[3];
-+		u8	en;
-+};
-+
-+/* class 8, command 2 stream Filter Instance status query short format
-+ * command no need structure define
-+ * Stream Filter Instance Query Statistics Response data
-+ */
-+struct sfi_counter_data {
-+	u32 matchl;
-+	u32 matchh;
-+	u32 msdu_dropl;
-+	u32 msdu_droph;
-+	u32 stream_gate_dropl;
-+	u32 stream_gate_droph;
-+	u32 flow_meter_dropl;
-+	u32 flow_meter_droph;
-+};
-+
-+#define ENETC_CBDR_SGI_OIPV_MASK 0x7
-+#define ENETC_CBDR_SGI_OIPV_EN	BIT(3)
-+#define ENETC_CBDR_SGI_CGTST	BIT(6)
-+#define ENETC_CBDR_SGI_OGTST	BIT(7)
-+#define ENETC_CBDR_SGI_CFG_CHG  BIT(1)
-+#define ENETC_CBDR_SGI_CFG_PND  BIT(2)
-+#define ENETC_CBDR_SGI_OEX		BIT(4)
-+#define ENETC_CBDR_SGI_OEXEN	BIT(5)
-+#define ENETC_CBDR_SGI_IRX		BIT(6)
-+#define ENETC_CBDR_SGI_IRXEN	BIT(7)
-+#define ENETC_CBDR_SGI_ACLLEN_MASK 0x3
-+#define ENETC_CBDR_SGI_OCLLEN_MASK 0xc
-+#define	ENETC_CBDR_SGI_EN		BIT(7)
-+/* class 9, command 0, Stream Gate Instance Table, Short Format
-+ * class 9, command 2, Stream Gate Instance Table entry query write back
-+ * Short Format
-+ */
-+struct sgi_table {
-+	u8	res[8];
-+	u8	oipv;
-+	u8	res0[2];
-+	u8	ocgtst;
-+	u8	res1[7];
-+	u8	gset;
-+	u8	oacl_len;
-+	u8	res2[2];
-+	u8	en;
-+};
-+
-+#define ENETC_CBDR_SGI_AIPV_MASK 0x7
-+#define ENETC_CBDR_SGI_AIPV_EN	BIT(3)
-+#define ENETC_CBDR_SGI_AGTST	BIT(7)
-+
-+/* class 9, command 1, Stream Gate Control List, Long Format */
-+struct sgcl_conf {
-+	u8	aipv;
-+	u8	res[2];
-+	u8	agtst;
-+	u8	res1[4];
-+	union {
-+		struct {
-+			u8 res2[4];
-+			u8 acl_len;
-+			u8 res3[3];
-+		};
-+		u8 cct[8]; /* Config change time */
-+	};
-+};
-+
-+/* stream control list class 9 , cmd 1 data buffer */
-+struct sgcl_data {
-+	u32	btl;
-+	u32 bth;
-+	u32	ct;
-+	u32	cte;
-+	/*struct sgce	*sgcl;*/
-+};
-+
-+/* class 9, command 2, stream gate instant table enery query, short format
-+ * write back see struct sgi_table. Do not need define.
-+ * class 9, command 3 Stream Gate Control List Query Descriptor - Long Format
-+ * ocl_len or acl_len to be 0, oper or admin would not show in the data space
-+ * true len will be write back in the space.
-+ */
-+struct sgcl_query {
-+	u8 res[12];
-+	u8 oacl_len;
-+	u8 res1[3];
-+};
-+
-+/* define for 'stat' */
-+#define ENETC_CBDR_SGIQ_AIPV_MASK 0x7
-+#define ENETC_CBDR_SGIQ_AIPV_EN	BIT(3)
-+#define ENETC_CBDR_SGIQ_AGTST	BIT(4)
-+#define ENETC_CBDR_SGIQ_ACL_LEN_MASK 0x60
-+#define ENETC_CBDR_SGIQ_OIPV_MASK 0x380
-+#define ENETC_CBDR_SGIQ_OIPV_EN	BIT(10)
-+#define ENETC_CBDR_SGIQ_OGTST	BIT(11)
-+#define ENETC_CBDR_SGIQ_OCL_LEN_MASK 0x3000
-+/* class 9, command 3 data space */
-+struct sgcl_query_resp {
-+	u16 stat;
-+	u16 res;
-+	u32	abtl;
-+	u32 abth;
-+	u32	act;
-+	u32	acte;
-+	u32	cctl;
-+	u32 ccth;
-+	u32	obtl;
-+	u32 obth;
-+	u32	oct;
-+	u32	octe;
-+};
-+
-+/* class 9, command 4 Stream Gate Instance Table Query Statistics Response
-+ * short command, write back, no command define
-+ */
-+struct sgi_query_stat_resp {
-+	u32	pgcl;
-+	u32 pgch;
-+	u32 dgcl;
-+	u32 dgch;
-+	u16	msdu_avail;
-+	u8 res[6];
-+};
-+
-+#define ENETC_CBDR_FMI_MR	BIT(0)
-+#define ENETC_CBDR_FMI_MREN BIT(1)
-+#define ENETC_CBDR_FMI_DOY	BIT(2)
-+#define	ENETC_CBDR_FMI_CM	BIT(3)
-+#define ENETC_CBDR_FMI_CF	BIT(4)
-+#define ENETC_CBDR_FMI_NDOR BIT(5)
-+#define ENETC_CBDR_FMI_OALEN BIT(6)
-+#define ENETC_CBDR_FMI_IRFPP_MASK 0x1f
-+/* class 10: command 0/1, Flow Meter Instance Set, short Format */
-+struct fmi_conf {
-+	__le32	cir;
-+	__le32	cbs;
-+	__le32	eir;
-+	__le32	ebs;
-+		u8	conf;
-+		u8	res1;
-+		u8	ir_fpp;
-+		u8	res2[4];
-+		u8	en;
-+};
-+
-+/* class:10, command:2, Flow Meter Instance Statistics Query Response */
-+struct fmi_query_stat_resp {
-+	u32	bcl;
-+	u32 bch;
-+	u32 dfl;
-+	u32 dfh;
-+	u32 d0gfl;
-+	u32 d0gfh;
-+	u32 d1gfl;
-+	u32 d1gfh;
-+	u32 dyfl;
-+	u32 dyfh;
-+	u32 ryfl;
-+	u32 ryfh;
-+	u32 drfl;
-+	u32 drfh;
-+	u32 rrfl;
-+	u32 rrfh;
-+	u32 lts;
-+	u32 bci;
-+	u32 bcf;
-+	u32 bei;
-+	u32 bef;
-+};
-+
- /* class 5, command 0 */
- struct tgs_gcl_conf {
- 	u8	atc;	/* init gate value */
- 	u8	res[7];
--	struct {
--		u8	res1[4];
--		__le16	acl_len;
--		u8	res2[2];
-+	union {
-+		struct {
-+			u8	res1[4];
-+			__le16	acl_len;
-+			u8	res2[2];
-+		};
-+		struct {
-+			u32 cctl;
-+			u32 ccth;
-+		};
- 	};
- };
- 
-+#define ENETC_CBDR_SGL_IOMEN	BIT(0)
-+#define ENETC_CBDR_SGL_IPVEN	BIT(3)
-+#define ENETC_CBDR_SGL_GTST		BIT(4)
-+#define ENETC_CBDR_SGL_IPV_MASK 0xe
-+/* Stream Gate Control List Entry */
-+struct sgce {
-+	u32	interval;
-+	u8	msdu[3];
-+	u8	multi;
-+};
-+
- /* gate control list entry */
- struct gce {
- 	__le32	period;
-@@ -662,13 +971,55 @@ struct tgs_gcl_data {
- 	struct gce	entry[0];
- };
- 
-+/* class 5, command 1 */
-+struct tgs_gcl_query {
-+		u8	res[12];
-+		union {
-+			struct {
-+				__le16	acl_len; /* admin list length */
-+				__le16	ocl_len; /* operation list length */
-+			};
-+			struct {
-+				u16 admin_list_len;
-+				u16 oper_list_len;
-+			};
-+		};
-+
-+};
-+
-+/* tgs_gcl_query command response data format */
-+struct tgs_gcl_resp {
-+	u32	abtl;	/* base time */
-+	u32 abth;
-+	u32	act;	/* cycle time */
-+	u32	acte;	/* cycle time extend */
-+	u32	cctl;	/* config change time */
-+	u32 ccth;
-+	u32 obtl;	/* operation base time */
-+	u32 obth;
-+	u32	oct;	/* operation cycle time */
-+	u32	octe;	/* operation cycle time extend */
-+	u32	ccel;	/* config change error */
-+	u32 cceh;
-+	/*struct gce	*gcl;*/
-+};
-+
- struct enetc_cbd {
- 	union{
-+		struct sfi_conf sfi_conf;
-+		struct sgi_table sgi_table;
-+		struct sgi_query_stat_resp sgi_query_stat_resp;
-+		struct fmi_conf fmi_conf;
- 		struct {
- 			__le32	addr[2];
- 			union {
- 				__le32	opt[4];
--				struct tgs_gcl_conf	gcl_conf;
-+				struct tgs_gcl_conf		gcl_conf;
-+				struct tgs_gcl_query	gcl_query;
-+				struct streamid_conf		sid_set;
-+				struct streamid_stat_query	sid_stat;
-+				struct sgcl_conf		sgcl_conf;
-+				struct sgcl_query		sgcl_query;
- 			};
- 		};	/* Long format */
- 		__le32 data[6];
-@@ -683,11 +1034,88 @@ struct enetc_cbd {
- 
- #define ENETC_CLK  400000000ULL
- 
-+#define ENETC_PTCFPR(n)		(0x1910 + (n) * 4) /* n = [0 ..7] */
-+#define ENETC_FPE		BIT(31)
-+
-+/* Port capability register 0 */
-+#define ENETC_PCAPR0_PSFPM	BIT(10)
-+#define ENETC_PCAPR0_PSFP	BIT(9)
-+#define ENETC_PCAPR0_TSN	BIT(4)
-+#define ENETC_PCAPR0_QBU	BIT(3)
-+
- /* port time gating control register */
- #define ENETC_QBV_PTGCR_OFFSET		0x11a00
- #define ENETC_QBV_TGE			BIT(31)
- #define ENETC_QBV_TGPE			BIT(30)
-+#define ENETC_QBV_TGDROP_DISABLE	BIT(29)
- 
- /* Port time gating capability register */
- #define ENETC_QBV_PTGCAPR_OFFSET	0x11a08
- #define ENETC_QBV_MAX_GCL_LEN_MASK	GENMASK(15, 0)
-+
-+/* Port time gating tick granularity register */
-+#define ENETC_QBV_PTGTGR_OFFSET 0x11a0c
-+#define ENETC_QBV_TICK_GRAN_MASK 0xffffffff
-+
-+/* Port time gating admin gate list status register */
-+#define ENETC_QBV_PTGAGLSR_OFFSET 0x11a10
-+
-+#define ENETC_QBV_CFG_PEND_MASK 0x00000002
-+
-+/* Port time gating admin gate list length register */
-+#define ENETC_QBV_PTGAGLLR_OFFSET 0x11a14
-+#define ENETC_QBV_ADMIN_GATE_LIST_LENGTH_MASK 0xffff
-+
-+/* Port time gating operational gate list status register */
-+#define ENETC_QBV_PTGOGLSR_OFFSET 0x11a18
-+#define ENETC_QBV_HTA_POS_MASK 0xffff0000
-+
-+#define ENETC_QBV_CURR_POS_MASK 0x0000ffff
-+
-+/* Port time gating operational gate list length register */
-+#define ENETC_QBV_PTGOGLLR_OFFSET 0x11a1c
-+#define ENETC_QBV_OPER_GATE_LIST_LENGTH_MASK 0xffff
-+
-+/* Port time gating current time register */
-+#define ENETC_QBV_PTGCTR_OFFSET 0x11a20
-+#define ENETC_QBV_CURR_TIME_MASK 0xffffffffffffffff
-+
-+/* Port traffic class a time gating control register */
-+#define ENETC_QBV_PTC0TGCR_OFFSET  0x11a40
-+#define ENETC_QBV_PTC1TGCR_OFFSET  0x11a50
-+#define ENETC_QBV_PTC2TGCR_OFFSET  0x11a60
-+#define ENETC_QBV_PTC3TGCR_OFFSET  0x11a70
-+#define ENETC_QBV_PTC4TGCR_OFFSET  0x11a80
-+#define ENETC_QBV_PTC5TGCR_OFFSET  0x11a90
-+#define ENETC_QBV_PTC6TGCR_OFFSET  0x11aa0
-+#define ENETC_QBV_PTC7TGCR_OFFSET  0x11ab0
-+
-+/* Maximum Service Data Unit. */
-+#define ENETC_PTC0MSDUR 0x12020
-+#define ENETC_PTC1MSDUR 0x12024
-+#define ENETC_PTC2MSDUR 0x12028
-+#define ENETC_PTC3MSDUR 0x1202c
-+#define ENETC_PTC4MSDUR 0x12030
-+#define ENETC_PTC5MSDUR 0x12034
-+#define ENETC_PTC6MSDUR 0x12038
-+#define ENETC_PTC7MSDUR 0x1203c
-+
-+#define ENETC_QBV_MAXSDU_MASK 0xffff
-+
-+/* Port traffic class a time gating status register */
-+#define ENETC_QBV_PTC0TGSR_OFFSET  0x11a44
-+#define ENETC_QBV_HTA_STATE_MASK  0x10000
-+#define ENETC_QBV_CURR_STATE_MASK 0x1
-+
-+/* Port traffic class a time gating transmission overrun counter register*/
-+#define ENETC_QBV_PTC0TGTOCR_OFFSET 0x11a48
-+#define ENETC_QBV_TX_OVERRUN_MASK 0xffffffffffffffff
-+#define ENETC_TGLSTR 0xa200
-+#define ENETC_TGS_MIN_DIS_MASK 0x80000000
-+#define ENETC_MIN_LOOKAHEAD_MASK 0xffff
-+
-+#define ENETC_PPSFPMR 0x11b00
-+#define ENETC_PPSFPMR_PSFPEN BIT(0)
-+#define ENETC_PPSFPMR_VS BIT(1)
-+#define ENETC_PPSFPMR_PVC BIT(2)
-+#define ENETC_PPSFPMR_PVZC BIT(3)
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-@@ -525,12 +525,16 @@ static void enetc_configure_port_mac(str
- 		      ENETC_PM0_TX_EN | ENETC_PM0_RX_EN);
- 	/* set auto-speed for RGMII */
- 	if (enetc_port_rd(hw, ENETC_PM0_IF_MODE) & ENETC_PMO_IFM_RG ||
--	    phy_mode == PHY_INTERFACE_MODE_RGMII)
-+	    phy_mode == PHY_INTERFACE_MODE_RGMII) {
- 		enetc_port_wr(hw, ENETC_PM0_IF_MODE, ENETC_PM0_IFM_RGAUTO);
-+		enetc_port_wr(hw, ENETC_PM1_IF_MODE, ENETC_PM0_IFM_RGAUTO);
-+	}
- 
- 	if (phy_mode == PHY_INTERFACE_MODE_XGMII ||
--	    phy_mode == PHY_INTERFACE_MODE_USXGMII)
-+	    phy_mode == PHY_INTERFACE_MODE_USXGMII) {
- 		enetc_port_wr(hw, ENETC_PM0_IF_MODE, ENETC_PM0_IFM_XGMII);
-+		enetc_port_wr(hw, ENETC_PM1_IF_MODE, ENETC_PM0_IFM_XGMII);
-+	}
- }
- 
- static void enetc_configure_port_pmac(struct enetc_hw *hw)
-@@ -749,6 +753,9 @@ static void enetc_pf_netdev_setup(struct
- 	if (si->hw_features & ENETC_SI_F_QBV)
- 		priv->active_offloads |= ENETC_F_QBV;
- 
-+	if (enetc_tsn_is_enabled() && (si->hw_features & ENETC_SI_F_QBU))
-+		priv->active_offloads |= ENETC_F_QBU;
-+
- 	/* pick up primary MAC address from SI */
- 	enetc_get_primary_mac_addr(&si->hw, ndev->dev_addr);
- }
-@@ -1027,6 +1034,8 @@ static int enetc_pf_probe(struct pci_dev
- 	netif_info(priv, probe, ndev, "%s v%s\n",
- 		   enetc_drv_name, enetc_drv_ver);
- 
-+	enetc_tsn_pf_init(ndev, pdev);
-+
- 	return 0;
- 
- err_reg_netdev:
-@@ -1063,6 +1072,8 @@ static void enetc_pf_remove(struct pci_d
- 	netif_info(priv, drv, si->ndev, "%s v%s remove\n",
- 		   enetc_drv_name, enetc_drv_ver);
- 
-+	enetc_tsn_pf_deinit(si->ndev);
-+
- 	unregister_netdev(si->ndev);
- 
- 	enetc_mdio_remove(pf);
---- /dev/null
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_tsn.c
-@@ -0,0 +1,2049 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-+/* Copyright 2017-2019 NXP */
-+
-+#ifdef CONFIG_ENETC_TSN
-+#include "enetc.h"
-+
-+#include <net/tsn.h>
-+#include <linux/module.h>
-+#include <linux/irqflags.h>
-+#include <linux/preempt.h>
-+
-+static u32 get_ndev_speed(struct net_device *netdev);
-+
-+static int alloc_cbdr(struct enetc_si *si, struct enetc_cbd **curr_cbd)
-+{
-+	struct enetc_cbdr *ring = &si->cbd_ring;
-+	int i;
-+
-+	i = ring->next_to_use;
-+	*curr_cbd = ENETC_CBD(*ring, i);
-+
-+	memset(*curr_cbd, 0, sizeof(struct enetc_cbd));
-+	return i;
-+}
-+
-+/* Transmit the BD control ring by writing the pir register.
-+ * Update the counters maintained by software.
-+ */
-+static int xmit_cbdr(struct enetc_si *si, int i)
-+{
-+	struct enetc_cbdr *ring = &si->cbd_ring;
-+	struct enetc_cbd *dest_cbd;
-+	int nc, timeout;
-+
-+	i = (i + 1) % ring->bd_count;
-+
-+	ring->next_to_use = i;
-+	/* let H/W know BD ring has been updated */
-+	enetc_wr_reg(ring->pir, i);
-+
-+	timeout = ENETC_CBDR_TIMEOUT;
-+
-+	do {
-+		if (enetc_rd_reg(ring->cir) == i)
-+			break;
-+		usleep_range(10, 20);
-+		timeout -= 10;
-+	} while (timeout);
-+
-+	if (!timeout)
-+		return -EBUSY;
-+
-+	nc = ring->next_to_clean;
-+
-+	while (enetc_rd_reg(ring->cir) != nc) {
-+		dest_cbd = ENETC_CBD(*ring, nc);
-+		if (dest_cbd->status_flags & ENETC_CBD_STATUS_MASK)
-+			WARN_ON(1);
-+
-+		nc = (nc + 1) % ring->bd_count;
-+	}
-+
-+	ring->next_to_clean = nc;
-+
-+	return 0;
-+}
-+
-+static inline u64 get_current_time(struct enetc_si *si)
-+{
-+	u64 tmp = 0;
-+
-+	tmp = (u64)enetc_rd(&si->hw, ENETC_SICTR0);
-+	return ((u64)enetc_rd(&si->hw, ENETC_SICTR1) << 32) + tmp;
-+}
-+
-+/* Class 10: Flow Meter Instance Statistics Query Descriptor - Long Format */
-+int enetc_qci_fmi_counters_get(struct net_device *ndev, u32 index,
-+			       struct fmi_query_stat_resp *counters)
-+{
-+	struct enetc_cbd *cbdr;
-+	struct fmi_query_stat_resp *fmi_data;
-+	dma_addr_t dma;
-+	u16 data_size, dma_size;
-+	int curr_cbd;
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+
-+	cbdr->index = cpu_to_le16((u16)index);
-+	cbdr->cmd = 2;
-+	cbdr->cls = BDCR_CMD_FLOW_METER;
-+	cbdr->status_flags = 0;
-+
-+	data_size = sizeof(struct fmi_query_stat_resp);
-+
-+	fmi_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
-+	if (!fmi_data)
-+		return -ENOMEM;
-+
-+	dma_size = cpu_to_le16(data_size);
-+	cbdr->length = dma_size;
-+
-+	dma = dma_map_single(&priv->si->pdev->dev, fmi_data,
-+			     data_size, DMA_FROM_DEVICE);
-+	if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
-+		netdev_err(priv->si->ndev, "DMA mapping failed!\n");
-+		kfree(fmi_data);
-+		return -ENOMEM;
-+	}
-+	cbdr->addr[0] = lower_32_bits(dma);
-+	cbdr->addr[1] = upper_32_bits(dma);
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	memcpy(counters, fmi_data, sizeof(struct fmi_query_stat_resp));
-+
-+	memset(cbdr, 0, sizeof(*cbdr));
-+	kfree(fmi_data);
-+	return 0;
-+}
-+
-+u16 enetc_get_max_gcl_len(struct enetc_hw *hw)
-+{
-+	return (enetc_rd(hw, ENETC_QBV_PTGCAPR_OFFSET)
-+		& ENETC_QBV_MAX_GCL_LEN_MASK);
-+}
-+
-+void enetc_pspeed_set(struct net_device *ndev)
-+{
-+	u32 speed, pspeed;
-+	u32 difflag = 0;
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+
-+	speed = get_ndev_speed(ndev);
-+	pspeed = enetc_port_rd(&priv->si->hw, ENETC_PMR)
-+		& ENETC_PMR_PSPEED_MASK;
-+	switch (speed) {
-+	case SPEED_1000:
-+		if (pspeed != ENETC_PMR_PSPEED_1000M) {
-+			difflag = 1;
-+			pspeed = ENETC_PMR_PSPEED_1000M;
-+		}
-+		break;
-+	case SPEED_2500:
-+		if (pspeed != ENETC_PMR_PSPEED_2500M) {
-+			difflag = 1;
-+			pspeed = ENETC_PMR_PSPEED_2500M;
-+		}
-+
-+		break;
-+	case SPEED_100:
-+		if (pspeed != ENETC_PMR_PSPEED_100M) {
-+			difflag = 1;
-+			pspeed = ENETC_PMR_PSPEED_100M;
-+		}
-+		break;
-+	case SPEED_10:
-+		if (pspeed != ENETC_PMR_PSPEED_10M) {
-+			difflag = 1;
-+			pspeed = ENETC_PMR_PSPEED_10M;
-+		}
-+		break;
-+	default:
-+		netdev_err(ndev, "not support speed\n");
-+	}
-+
-+	if (difflag) {
-+		enetc_port_wr(&priv->si->hw, ENETC_PMR,
-+			      (enetc_port_rd(&priv->si->hw, ENETC_PMR)
-+			      & (~ENETC_PMR_PSPEED_MASK))
-+			      | pspeed);
-+	}
-+}
-+
-+/* CBD Class 5: Time Gated Scheduling Gate Control List configuration
-+ * Descriptor - Long Format
-+ */
-+int enetc_qbv_set(struct net_device *ndev, struct tsn_qbv_conf *admin_conf)
-+{
-+	struct enetc_cbd *cbdr;
-+	struct tgs_gcl_data *gcl_data;
-+	struct tgs_gcl_conf *gcl_config;
-+	struct gce *gce;
-+	u16 gcl_len;
-+	u16 data_size;
-+	int i;
-+	dma_addr_t dma;
-+	int curr_cbd;
-+	struct tsn_qbv_basic *admin_basic = &admin_conf->admin;
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	u32 temp;
-+	u64 tempclock;
-+	struct tsn_port *port;
-+
-+	port = tsn_get_port(ndev);
-+	if (!port) {
-+		netdev_err(priv->si->ndev, "TSN device not registered!\n");
-+		return -ENODEV;
-+	}
-+
-+	enetc_pspeed_set(ndev);
-+
-+	gcl_len = admin_basic->control_list_length;
-+	if (gcl_len > enetc_get_max_gcl_len(&priv->si->hw))
-+		return -EINVAL;
-+
-+	temp = enetc_rd(&priv->si->hw, ENETC_QBV_PTGCR_OFFSET);
-+	if (admin_conf->gate_enabled && !(temp & ENETC_QBV_TGE)) {
-+		enetc_wr(&priv->si->hw, ENETC_QBV_PTGCR_OFFSET,
-+			 temp & (~ENETC_QBV_TGE));
-+		usleep_range(10, 20);
-+		enetc_wr(&priv->si->hw, ENETC_QBV_PTGCR_OFFSET,
-+			 temp | ENETC_QBV_TGE);
-+	} else if (!admin_conf->gate_enabled) {
-+		enetc_wr(&priv->si->hw, ENETC_QBV_PTGCR_OFFSET,
-+			 temp & (~ENETC_QBV_TGE));
-+		memcpy(&port->nd.ntdata, admin_conf, sizeof(*admin_conf));
-+		call_tsn_notifiers(TSN_QBV_CONFIGCHANGETIME_ARRIVE,
-+				   ndev, &port->nd);
-+		return 0;
-+	}
-+
-+	/* Set the maximum frame size for each traffic class index
-+	 * PTCaMSDUR[MAXSDU]. The maximum frame size cannot exceed
-+	 * 9,600 bytes (0x2580). Frames that exceed the limit are
-+	 * discarded.
-+	 */
-+	if (admin_conf->maxsdu) {
-+		enetc_wr(&priv->si->hw, ENETC_PTC0MSDUR, admin_conf->maxsdu);
-+		enetc_wr(&priv->si->hw, ENETC_PTC1MSDUR, admin_conf->maxsdu);
-+		enetc_wr(&priv->si->hw, ENETC_PTC2MSDUR, admin_conf->maxsdu);
-+		enetc_wr(&priv->si->hw, ENETC_PTC3MSDUR, admin_conf->maxsdu);
-+		enetc_wr(&priv->si->hw, ENETC_PTC4MSDUR, admin_conf->maxsdu);
-+		enetc_wr(&priv->si->hw, ENETC_PTC5MSDUR, admin_conf->maxsdu);
-+		enetc_wr(&priv->si->hw, ENETC_PTC6MSDUR, admin_conf->maxsdu);
-+		enetc_wr(&priv->si->hw, ENETC_PTC7MSDUR, admin_conf->maxsdu);
-+	}
-+
-+	/* Configure the (administrative) gate control list using the
-+	 * control BD descriptor.
-+	 */
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+
-+	gcl_config = &cbdr->gcl_conf;
-+
-+	data_size = struct_size(gcl_data, entry, gcl_len);
-+
-+	gcl_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
-+	if (!gcl_data)
-+		return -ENOMEM;
-+
-+	gce = &gcl_data->entry[0];
-+
-+	gcl_config->atc = admin_basic->gate_states;
-+	gcl_config->acl_len = cpu_to_le16(gcl_len);
-+
-+	if (!admin_basic->base_time) {
-+		gcl_data->btl =
-+			cpu_to_le32(enetc_rd(&priv->si->hw, ENETC_SICTR0));
-+		gcl_data->bth =
-+			cpu_to_le32(enetc_rd(&priv->si->hw, ENETC_SICTR1));
-+	} else {
-+		gcl_data->btl =
-+			cpu_to_le32(lower_32_bits(admin_basic->base_time));
-+		gcl_data->bth =
-+			cpu_to_le32(upper_32_bits(admin_basic->base_time));
-+	}
-+
-+	gcl_data->ct = cpu_to_le32(admin_basic->cycle_time);
-+	gcl_data->cte = cpu_to_le32(admin_basic->cycle_time_extension);
-+
-+	for (i = 0; i < gcl_len; i++) {
-+		struct gce *temp_gce = gce + i;
-+		struct tsn_qbv_entry *temp_entry;
-+
-+		temp_entry = admin_basic->control_list + i;
-+
-+		temp_gce->gate = temp_entry->gate_state;
-+		temp_gce->period = cpu_to_le32(temp_entry->time_interval);
-+	}
-+
-+	cbdr->length = cpu_to_le16(data_size);
-+	cbdr->status_flags = 0;
-+
-+	dma = dma_map_single(&priv->si->pdev->dev, gcl_data,
-+			     data_size, DMA_TO_DEVICE);
-+	if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
-+		netdev_err(priv->si->ndev, "DMA mapping failed!\n");
-+		kfree(gcl_data);
-+		return -ENOMEM;
-+	}
-+
-+	cbdr->addr[0] = lower_32_bits(dma);
-+	cbdr->addr[1] = upper_32_bits(dma);
-+	cbdr->cmd = 0;
-+	cbdr->cls = BDCR_CMD_PORT_GCL;
-+
-+	/* Updated by ENETC on completion of the configuration
-+	 * command. A zero value indicates success.
-+	 */
-+	cbdr->status_flags = 0;
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	memcpy(&port->nd.ntdata, admin_conf, sizeof(*admin_conf));
-+
-+	tempclock = ((u64)le32_to_cpu(gcl_config->ccth)) << 32;
-+	port->nd.ntdata.qbv_notify.admin.base_time =
-+		le32_to_cpu(gcl_config->cctl) + tempclock;
-+
-+	memset(cbdr, 0, sizeof(struct enetc_cbd));
-+	dma_unmap_single(&priv->si->pdev->dev, dma, data_size, DMA_TO_DEVICE);
-+	kfree(gcl_data);
-+
-+	call_tsn_notifiers(TSN_QBV_CONFIGCHANGETIME_ARRIVE,
-+			   ndev, &port->nd);
-+
-+	return 0;
-+}
-+
-+/* CBD Class 5: Time Gated Scheduling Gate Control List query
-+ * Descriptor - Long Format
-+ */
-+int enetc_qbv_get(struct net_device *ndev, struct tsn_qbv_conf *admin_conf)
-+{
-+	struct enetc_cbd *cbdr;
-+	struct tgs_gcl_resp *gcl_data;
-+	struct tgs_gcl_query *gcl_query;
-+	struct gce *gce;
-+	struct tsn_qbv_basic *admin_basic = &admin_conf->admin;
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	dma_addr_t dma;
-+	int curr_cbd;
-+	u16 maxlen;
-+	u16 data_size, dma_size;
-+	u16 admin_len;
-+	u16 oper_len;
-+	u64 temp;
-+	int i;
-+
-+	if (enetc_rd(&priv->si->hw, ENETC_QBV_PTGCR_OFFSET) & ENETC_QBV_TGE) {
-+		admin_conf->gate_enabled = true;
-+	} else {
-+		admin_conf->gate_enabled = false;
-+		return 0;
-+	}
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+
-+	gcl_query =  &cbdr->gcl_query;
-+
-+	maxlen = enetc_get_max_gcl_len(&priv->si->hw);
-+
-+	data_size = sizeof(struct tgs_gcl_resp)
-+			+ sizeof(struct gce) * 2 * maxlen;
-+
-+	gcl_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
-+	if (!gcl_data)
-+		return -ENOMEM;
-+
-+	gce = (struct gce *)(gcl_data + 1);
-+
-+	gcl_query->acl_len = cpu_to_le16(maxlen);
-+
-+	dma_size = cpu_to_le16(data_size);
-+	cbdr->length = dma_size;
-+	cbdr->status_flags = 0;
-+
-+	dma = dma_map_single(&priv->si->pdev->dev, gcl_data,
-+			     data_size, DMA_FROM_DEVICE);
-+	if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
-+		netdev_err(priv->si->ndev, "DMA mapping failed!\n");
-+		kfree(gcl_data);
-+		return -ENOMEM;
-+	}
-+
-+	cbdr->addr[0] = lower_32_bits(dma);
-+	cbdr->addr[1] = upper_32_bits(dma);
-+	cbdr->cmd = 1;
-+	cbdr->cls = BDCR_CMD_PORT_GCL;
-+	xmit_cbdr(priv->si, curr_cbd);
-+	dma_unmap_single(&priv->si->pdev->dev, dma, data_size, DMA_FROM_DEVICE);
-+
-+	/* since cbdr already passed to free, below could be get wrong */
-+	admin_len = le16_to_cpu(gcl_query->admin_list_len);
-+	oper_len = le16_to_cpu(gcl_query->oper_list_len);
-+
-+	admin_basic->control_list_length = admin_len;
-+
-+	temp = ((u64)le32_to_cpu(gcl_data->abth)) << 32;
-+	admin_basic->base_time = le32_to_cpu(gcl_data->abtl) + temp;
-+
-+	admin_basic->cycle_time = le32_to_cpu(gcl_data->act);
-+	admin_basic->cycle_time_extension = le32_to_cpu(gcl_data->acte);
-+
-+	admin_basic->control_list = kcalloc(admin_len,
-+					    sizeof(admin_basic->control_list),
-+					    GFP_KERNEL);
-+	if (!admin_basic->control_list) {
-+		memset(cbdr, 0, sizeof(*cbdr));
-+		kfree(gcl_data);
-+		return -ENOMEM;
-+	}
-+
-+	for (i = 0; i < admin_len; i++) {
-+		struct gce *temp_gce = gce + i;
-+		struct tsn_qbv_entry *temp_entry;
-+
-+		temp_entry = admin_basic->control_list + i;
-+
-+		temp_entry->gate_state = temp_gce->gate;
-+		temp_entry->time_interval = le32_to_cpu(temp_gce->period);
-+	}
-+
-+	/* Updated by ENETC on completion of the configuration
-+	 * command. A zero value indicates success.
-+	 */
-+	admin_conf->config_change = true;
-+
-+	memset(cbdr, 0, sizeof(*cbdr));
-+	kfree(gcl_data);
-+
-+	return 0;
-+}
-+
-+int enetc_qbv_get_status(struct net_device *ndev,
-+			 struct tsn_qbv_status *status)
-+{
-+	struct enetc_cbd *cbdr;
-+	struct tgs_gcl_resp *gcl_data;
-+	struct tgs_gcl_query *gcl_query;
-+	struct gce *gce;
-+	struct tsn_qbv_basic *oper_basic;
-+	struct enetc_ndev_priv *priv;
-+	dma_addr_t dma;
-+	int curr_cbd;
-+	u16 maxlen;
-+	u16 data_size, dma_size;
-+	u16 admin_len;
-+	u16 oper_len;
-+	u64 temp;
-+	int i;
-+
-+	if (!ndev)
-+		return -EINVAL;
-+
-+	if (!status)
-+		return -EINVAL;
-+
-+	oper_basic = &status->oper;
-+	priv = netdev_priv(ndev);
-+
-+	if (!(enetc_rd(&priv->si->hw, ENETC_QBV_PTGCR_OFFSET) & ENETC_QBV_TGE))
-+		return -EINVAL;
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+
-+	gcl_query = &cbdr->gcl_query;
-+
-+	maxlen = enetc_get_max_gcl_len(&priv->si->hw);
-+
-+	data_size = sizeof(struct tgs_gcl_resp) +
-+			sizeof(struct gce) * 2 * maxlen;
-+
-+	gcl_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
-+	if (!gcl_data)
-+		return -ENOMEM;
-+
-+	gce = (struct gce *)(gcl_data + 1);
-+
-+	gcl_query->acl_len = cpu_to_le16(maxlen);
-+	gcl_query->ocl_len = cpu_to_le16(maxlen);
-+
-+	dma_size = cpu_to_le16(data_size);
-+	cbdr->length = dma_size;
-+	cbdr->status_flags = 0; /* long format command no ie */
-+
-+	dma = dma_map_single(&priv->si->pdev->dev, gcl_data,
-+			     data_size, DMA_FROM_DEVICE);
-+	if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
-+		netdev_err(priv->si->ndev, "DMA mapping failed!\n");
-+		kfree(gcl_data);
-+		return -ENOMEM;
-+	}
-+
-+	cbdr->addr[0] = lower_32_bits(dma);
-+	cbdr->addr[1] = upper_32_bits(dma);
-+	cbdr->cmd = 1;
-+	cbdr->cls = BDCR_CMD_PORT_GCL;
-+	xmit_cbdr(priv->si, curr_cbd);
-+	dma_unmap_single(&priv->si->pdev->dev, dma, data_size, DMA_FROM_DEVICE);
-+
-+	/* since cbdr already passed to free, below could be get wrong */
-+	admin_len = le16_to_cpu(gcl_query->admin_list_len);
-+	oper_len = le16_to_cpu(gcl_query->oper_list_len);
-+
-+	if (enetc_rd(&priv->si->hw, ENETC_QBV_PTGAGLSR_OFFSET) &
-+						ENETC_QBV_CFG_PEND_MASK) {
-+		status->config_pending = true;
-+		goto exit;
-+	}
-+
-+	/* The Oper and Admin timing fields exist in the response buffer even
-+	 * if no valid corresponding lists exists. These fields are considered
-+	 * invalid if the corresponding list does not exist.
-+	 */
-+	status->config_pending = false;
-+	temp = ((u64)le32_to_cpu(gcl_data->ccth)) << 32;
-+	status->config_change_time = le32_to_cpu(gcl_data->cctl) + temp;
-+
-+	temp = ((u64)le32_to_cpu(gcl_data->cceh)) << 32;
-+	status->config_change_error = le32_to_cpu(gcl_data->ccel) + temp;
-+
-+	/* changed to SITGTGR */
-+	status->tick_granularity = enetc_rd(&priv->si->hw, ENETC_SITGTGR);
-+
-+	/* current time */
-+	status->current_time = get_current_time(priv->si);
-+
-+	status->supported_list_max = maxlen;
-+
-+	/* status->oper.gate_states , no init oper/admin gate state */
-+	status->oper.control_list_length = oper_len;
-+	temp = ((u64)le32_to_cpu(gcl_data->obth)) << 32;
-+	status->oper.base_time = le32_to_cpu(gcl_data->obtl) + temp;
-+	status->oper.cycle_time = le32_to_cpu(gcl_data->oct);
-+	status->oper.cycle_time_extension = le32_to_cpu(gcl_data->octe);
-+
-+	oper_basic->control_list =
-+		kcalloc(oper_len, sizeof(oper_basic->control_list), GFP_KERNEL);
-+	if (!oper_basic->control_list) {
-+		memset(cbdr, 0, sizeof(*cbdr));
-+		kfree(gcl_data);
-+		return -ENOMEM;
-+	}
-+
-+	for (i = 0; i < oper_len; i++) {
-+		struct gce *temp_gce = gce + maxlen + i;
-+		struct tsn_qbv_entry *temp_entry = oper_basic->control_list + i;
-+
-+		temp_entry->gate_state = temp_gce->gate;
-+		temp_entry->time_interval = le32_to_cpu(temp_gce->period);
-+	}
-+
-+exit:
-+	memset(cbdr, 0, sizeof(*cbdr));
-+	kfree(gcl_data);
-+	return 0;
-+}
-+
-+/* CBD Class 7: Stream Identity Entry Set Descriptor - Long Format */
-+int enetc_cb_streamid_set(struct net_device *ndev, u32 index,
-+			  bool en, struct tsn_cb_streamid *streamid)
-+{
-+	struct enetc_cbd *cbdr;
-+	void *si_data;
-+	struct null_streamid_data *si_data1;
-+	struct smac_streamid_data *si_data2;
-+	struct streamid_conf *si_conf;
-+	struct enetc_ndev_priv *priv;
-+	dma_addr_t dma;
-+	u16 data_size, dma_size;
-+	int curr_cbd;
-+
-+	if (!ndev)
-+		return -EINVAL;
-+
-+	priv = netdev_priv(ndev);
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+
-+	cbdr->index = cpu_to_le16((u16)index);
-+	cbdr->cmd = 0;
-+	cbdr->cls = BDCR_CMD_STREAM_IDENTIFY;
-+	cbdr->status_flags = 0;
-+
-+	data_size = sizeof(struct null_streamid_data);
-+	si_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
-+	cbdr->length = cpu_to_le16(data_size);
-+
-+	dma = dma_map_single(&priv->si->pdev->dev, si_data,
-+			     data_size, DMA_FROM_DEVICE);
-+	if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
-+		netdev_err(priv->si->ndev, "DMA mapping failed!\n");
-+		kfree(si_data);
-+		return -ENOMEM;
-+	}
-+
-+	cbdr->addr[0] = lower_32_bits(dma);
-+	cbdr->addr[1] = upper_32_bits(dma);
-+	si_data1 = (struct null_streamid_data *)si_data;
-+	si_data1->dmac[0] = 0xFF;
-+	si_data1->dmac[1] = 0xFF;
-+	si_data1->dmac[2] = 0xFF;
-+	si_data1->dmac[3] = 0xFF;
-+	si_data1->dmac[4] = 0xFF;
-+	si_data1->dmac[5] = 0xFF;
-+	si_data1->vid_vidm_tg =
-+		cpu_to_le16(ENETC_CBDR_SID_VID_MASK
-+			    + ((0x3 << 14) | ENETC_CBDR_SID_VIDM));
-+
-+	si_conf = &cbdr->sid_set;
-+	/* Only one port supported for one entry, set itself */
-+	si_conf->iports = 1 << (priv->si->pdev->devfn & 0x7);
-+	si_conf->id_type = 1;
-+	si_conf->oui[2] = 0x0;
-+	si_conf->oui[1] = 0x80;
-+	si_conf->oui[0] = 0xC2;
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	memset(cbdr, 0, sizeof(*cbdr));
-+	kfree(si_data);
-+
-+	if (!en)
-+		return 0;
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+
-+	cbdr->index = cpu_to_le16((u16)index);
-+	cbdr->cmd = 0;
-+	cbdr->cls = BDCR_CMD_STREAM_IDENTIFY;
-+	cbdr->status_flags = 0;
-+
-+	si_conf = &cbdr->sid_set;
-+	si_conf->en = 0x80;
-+	si_conf->stream_handle = cpu_to_le32(streamid->handle);
-+	si_conf->iports = 1 << (priv->si->pdev->devfn & 0x7);
-+	si_conf->id_type = streamid->type;
-+	si_conf->oui[2] = 0x0;
-+	si_conf->oui[1] = 0x80;
-+	si_conf->oui[0] = 0xC2;
-+
-+	if (si_conf->id_type == 1) {
-+		data_size = sizeof(struct null_streamid_data);
-+		si_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
-+	} else if (si_conf->id_type == 2) {
-+		data_size = sizeof(struct smac_streamid_data);
-+		si_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
-+	} else {
-+		return -EINVAL;
-+	}
-+
-+	if (!si_data)
-+		return -ENOMEM;
-+
-+	dma_size = cpu_to_le16(data_size);
-+	cbdr->length = dma_size;
-+	cbdr->status_flags = 0;
-+
-+	dma = dma_map_single(&priv->si->pdev->dev, si_data,
-+			     data_size, DMA_FROM_DEVICE);
-+	if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
-+		netdev_err(priv->si->ndev, "DMA mapping failed!\n");
-+		memset(cbdr, 0, sizeof(*cbdr));
-+		kfree(si_data);
-+		return -ENOMEM;
-+	}
-+	cbdr->addr[0] = lower_32_bits(dma);
-+	cbdr->addr[1] = upper_32_bits(dma);
-+
-+	/* VIDM default to be 1.
-+	 * VID Match. If set (b1) then the VID must match, otherwise
-+	 * any VID is considered a match. VIDM setting is only used
-+	 * when TG is set to b01.
-+	 */
-+	if (si_conf->id_type == 1) {
-+		si_data1 = (struct null_streamid_data *)si_data;
-+		si_data1->dmac[0] = streamid->para.nid.dmac & 0xFF;
-+		si_data1->dmac[1] = (streamid->para.nid.dmac >> 8) & 0xFF;
-+		si_data1->dmac[2] = (streamid->para.nid.dmac >> 16) & 0xFF;
-+		si_data1->dmac[3] = (streamid->para.nid.dmac >> 24) & 0xFF;
-+		si_data1->dmac[4] = (streamid->para.nid.dmac >> 32) & 0xFF;
-+		si_data1->dmac[5] = (streamid->para.nid.dmac >> 40) & 0xFF;
-+		si_data1->vid_vidm_tg =
-+		cpu_to_le16((streamid->para.nid.vid & ENETC_CBDR_SID_VID_MASK) +
-+			    ((((u16)(streamid->para.nid.tagged) & 0x3) << 14)
-+			     | ENETC_CBDR_SID_VIDM));
-+	} else if (si_conf->id_type == 2) {
-+		si_data2 = (struct smac_streamid_data *)si_data;
-+		si_data2->smac[0] = streamid->para.sid.smac & 0xFF;
-+		si_data2->smac[1] = (streamid->para.sid.smac >> 8) & 0xFF;
-+		si_data2->smac[2] = (streamid->para.sid.smac >> 16) & 0xFF;
-+		si_data2->smac[3] = (streamid->para.sid.smac >> 24) & 0xFF;
-+		si_data2->smac[4] = (streamid->para.sid.smac >> 32) & 0xFF;
-+		si_data2->smac[5] = (streamid->para.sid.smac >> 40) & 0xFF;
-+		si_data2->vid_vidm_tg =
-+		cpu_to_le16((streamid->para.sid.vid & ENETC_CBDR_SID_VID_MASK) +
-+			    ((((u16)(streamid->para.sid.tagged) & 0x3) << 14)
-+			     | ENETC_CBDR_SID_VIDM));
-+	}
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	memset(cbdr, 0, sizeof(*cbdr));
-+	kfree(si_data);
-+
-+	return 0;
-+}
-+
-+/* CBD Class 7: Stream Identity Entry Query Descriptor - Long Format */
-+int enetc_cb_streamid_get(struct net_device *ndev, u32 index,
-+			  struct tsn_cb_streamid *streamid)
-+{
-+	struct enetc_cbd *cbdr;
-+	struct streamid_query_resp *si_data;
-+	struct enetc_ndev_priv *priv;
-+	dma_addr_t dma;
-+	u16 data_size, dma_size;
-+	int curr_cbd;
-+	int valid;
-+
-+	if (!ndev)
-+		return -EINVAL;
-+
-+	priv = netdev_priv(ndev);
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+
-+	cbdr->index = cpu_to_le32(index);
-+	cbdr->cmd = 1;
-+	cbdr->cls = BDCR_CMD_STREAM_IDENTIFY;
-+	cbdr->status_flags = 0;
-+
-+	data_size = sizeof(struct streamid_query_resp);
-+	si_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
-+	if (!si_data)
-+		return -ENOMEM;
-+
-+	dma_size = cpu_to_le16(data_size);
-+	cbdr->length = dma_size;
-+	cbdr->status_flags = 0; /* long format command no ie */
-+
-+	dma = dma_map_single(&priv->si->pdev->dev, si_data,
-+			     data_size, DMA_FROM_DEVICE);
-+	if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
-+		netdev_err(priv->si->ndev, "DMA mapping failed!\n");
-+		kfree(si_data);
-+		return -ENOMEM;
-+	}
-+	cbdr->addr[0] = lower_32_bits(dma);
-+	cbdr->addr[1] = upper_32_bits(dma);
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	streamid->type = si_data->id_type;
-+
-+	if (streamid->type == 1) {
-+		streamid->para.nid.dmac = si_data->mac[0]
-+			+ ((u64)si_data->mac[1] << 8)
-+			+ ((u64)si_data->mac[2] << 16)
-+			+ ((u64)si_data->mac[3] << 24)
-+			+ ((u64)si_data->mac[4] << 32)
-+			+ ((u64)si_data->mac[5] << 40);
-+		/* VID Match. If set (b1) then the VID must match, otherwise
-+		 * any VID is considered a match.
-+		 */
-+		streamid->para.nid.vid =
-+				le16_to_cpu(si_data->vid_vidm_tg
-+					    & ENETC_CBDR_SID_VID_MASK);
-+		streamid->para.nid.tagged =
-+				le16_to_cpu(si_data->vid_vidm_tg >> 14 & 0x3);
-+	} else if (streamid->type == 2) {
-+		streamid->para.sid.smac = si_data->mac[0]
-+			+ ((u64)si_data->mac[1] << 8)
-+			+ ((u64)si_data->mac[2] << 16)
-+			+ ((u64)si_data->mac[3] << 24)
-+			+ ((u64)si_data->mac[4] << 32)
-+			+ ((u64)si_data->mac[5] << 40);
-+		/* VID Match. If set (b1) then the VID must match, otherwise
-+		 * any VID is considered a match.
-+		 */
-+		streamid->para.sid.vid =
-+				le16_to_cpu(si_data->vid_vidm_tg
-+					    & ENETC_CBDR_SID_VID_MASK);
-+		streamid->para.sid.tagged =
-+				le16_to_cpu(si_data->vid_vidm_tg >> 14 & 0x3);
-+	}
-+
-+	streamid->handle = le32_to_cpu(si_data->stream_handle);
-+	streamid->ifac_iport = le32_to_cpu(si_data->input_ports);
-+	valid = si_data->en ? 1 : 0;
-+
-+	memset(cbdr, 0, sizeof(*cbdr));
-+	kfree(si_data);
-+
-+	return valid;
-+}
-+
-+/*  CBD Class 7: Stream Identity Statistics Query Descriptor - Long Format */
-+int enetc_cb_streamid_counters_get(struct net_device *ndev, u32 index,
-+				   struct tsn_cb_streamid_counters *counters)
-+{
-+	return 0;
-+}
-+
-+void enetc_qci_enable(struct enetc_hw *hw)
-+{
-+	enetc_wr(hw, ENETC_PPSFPMR, enetc_rd(hw, ENETC_PPSFPMR)
-+		 | ENETC_PPSFPMR_PSFPEN | ENETC_PPSFPMR_VS
-+		 | ENETC_PPSFPMR_PVC | ENETC_PPSFPMR_PVZC);
-+}
-+
-+void enetc_qci_disable(struct enetc_hw *hw)
-+{
-+	enetc_wr(hw, ENETC_PPSFPMR, enetc_rd(hw, ENETC_PPSFPMR)
-+		 & ~ENETC_PPSFPMR_PSFPEN & ~ENETC_PPSFPMR_VS
-+		 & ~ENETC_PPSFPMR_PVC & ~ENETC_PPSFPMR_PVZC);
-+}
-+
-+/* CBD Class 8: Stream Filter Instance Set Descriptor - Short Format */
-+int enetc_qci_sfi_set(struct net_device *ndev, u32 index, bool en,
-+		      struct tsn_qci_psfp_sfi_conf *tsn_qci_sfi)
-+{
-+	struct enetc_cbd *cbdr;
-+	struct sfi_conf *sfi_config;
-+
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	int curr_cbd;
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+
-+	cbdr->index = cpu_to_le16(index);
-+	cbdr->cmd = 0;
-+	cbdr->cls = BDCR_CMD_STREAM_FILTER;
-+	cbdr->status_flags = 0x80;
-+	cbdr->length = cpu_to_le16(1);
-+
-+	sfi_config = &cbdr->sfi_conf;
-+	if (en)
-+		sfi_config->en = 0x80;
-+
-+	if (tsn_qci_sfi->stream_handle_spec >= 0) {
-+		sfi_config->stream_handle =
-+			cpu_to_le32(tsn_qci_sfi->stream_handle_spec);
-+		sfi_config->sthm |= 0x80;
-+	}
-+
-+	sfi_config->sg_inst_table_index =
-+		cpu_to_le16(tsn_qci_sfi->stream_gate_instance_id);
-+	sfi_config->input_ports = 1 << (priv->si->pdev->devfn & 0x7);
-+
-+	/* The priority value which may be matched against the
-+	 * frame’s priority value to determine a match for this entry.
-+	 */
-+	if (tsn_qci_sfi->priority_spec >= 0)
-+		sfi_config->multi |= (tsn_qci_sfi->priority_spec & 0x7) | 0x8;
-+
-+	/* Filter Type. Identifies the contents of the MSDU/FM_INST_INDEX
-+	 * field as being either an MSDU value or an index into the Flow
-+	 * Meter Instance table.
-+	 */
-+	if (tsn_qci_sfi->stream_filter.maximum_sdu_size != 0) {
-+		sfi_config->msdu =
-+		cpu_to_le16(tsn_qci_sfi->stream_filter.maximum_sdu_size);
-+		sfi_config->multi |= 0x40;
-+	}
-+
-+	if (tsn_qci_sfi->stream_filter.flow_meter_instance_id >= 0) {
-+		sfi_config->fm_inst_table_index =
-+		cpu_to_le16(tsn_qci_sfi->stream_filter.flow_meter_instance_id);
-+		sfi_config->multi |= 0x80;
-+	}
-+
-+	/* Stream blocked due to oversized frame enable. TRUE or FALSE */
-+	if (tsn_qci_sfi->block_oversize_enable)
-+		sfi_config->multi |= 0x20;
-+
-+	/* Stream blocked due to oversized frame. TRUE or FALSE */
-+	if (tsn_qci_sfi->block_oversize)
-+		sfi_config->multi |= 0x10;
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	memset(cbdr, 0, sizeof(*cbdr));
-+	return 0;
-+}
-+
-+/* CBD Class 8: Stream Filter Instance Query Descriptor - Short Format */
-+int enetc_qci_sfi_get(struct net_device *ndev, u32 index,
-+		      struct tsn_qci_psfp_sfi_conf *tsn_qci_sfi)
-+{
-+	struct enetc_cbd *cbdr;
-+	struct sfi_conf *sfi_config;
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	int curr_cbd;
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+
-+	cbdr->index = cpu_to_le16(index);
-+	cbdr->cmd = 1;
-+	cbdr->cls = BDCR_CMD_STREAM_FILTER;
-+	cbdr->status_flags = 0x80;
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	sfi_config = &cbdr->sfi_conf;
-+	if (sfi_config->sthm & 0x80)
-+		tsn_qci_sfi->stream_handle_spec =
-+			le32_to_cpu(sfi_config->stream_handle);
-+	else
-+		tsn_qci_sfi->stream_handle_spec = -1;
-+
-+	tsn_qci_sfi->stream_gate_instance_id =
-+		le16_to_cpu(sfi_config->sg_inst_table_index);
-+
-+	if (sfi_config->multi & 0x8)
-+		tsn_qci_sfi->priority_spec =
-+			le16_to_cpu(sfi_config->multi & 0x7);
-+	else
-+		tsn_qci_sfi->priority_spec = -1;
-+
-+	/* Filter Type. Identifies the contents of the MSDU/FM_INST_INDEX
-+	 * field as being either an MSDU value or an index into the Flow
-+	 * Meter Instance table.
-+	 */
-+	if (sfi_config->multi & 0x80)
-+		tsn_qci_sfi->stream_filter.flow_meter_instance_id =
-+			le16_to_cpu(sfi_config->fm_inst_table_index);
-+	else
-+		tsn_qci_sfi->stream_filter.flow_meter_instance_id = -1;
-+
-+	if (sfi_config->multi & 0x40)
-+		tsn_qci_sfi->stream_filter.maximum_sdu_size =
-+			le16_to_cpu(sfi_config->msdu);
-+
-+	/* Stream blocked due to oversized frame enable. TRUE or FALSE */
-+	if (sfi_config->multi & 0x20)
-+		tsn_qci_sfi->block_oversize_enable = true;
-+	/* Stream blocked due to oversized frame. TRUE or FALSE */
-+	if (sfi_config->multi & 0x10)
-+		tsn_qci_sfi->block_oversize = true;
-+
-+	if (sfi_config->en & 0x80) {
-+		memset(cbdr, 0, sizeof(*cbdr));
-+		return 1;
-+	}
-+
-+	memset(cbdr, 0, sizeof(*cbdr));
-+	return 0;
-+}
-+
-+/* CBD Class 8: Stream Filter Instance Query Statistics
-+ * Descriptor - Long Format
-+ */
-+int enetc_qci_sfi_counters_get(struct net_device *ndev, u32 index,
-+			       struct tsn_qci_psfp_sfi_counters *counters)
-+{
-+	struct enetc_cbd *cbdr;
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	int curr_cbd;
-+	struct sfi_counter_data *sfi_counter_data;
-+	dma_addr_t dma;
-+	u16 data_size, dma_size;
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+
-+	cbdr->index = cpu_to_le16((u16)index);
-+	cbdr->cmd = 2;
-+	cbdr->cls = BDCR_CMD_STREAM_FILTER;
-+	cbdr->status_flags = 0;
-+
-+	data_size = sizeof(struct sfi_counter_data);
-+	sfi_counter_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
-+	if (!sfi_counter_data)
-+		return -ENOMEM;
-+
-+	dma = dma_map_single(&priv->si->pdev->dev, sfi_counter_data,
-+			     data_size, DMA_FROM_DEVICE);
-+	if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
-+		netdev_err(priv->si->ndev, "DMA mapping failed!\n");
-+		kfree(sfi_counter_data);
-+		return -ENOMEM;
-+	}
-+	cbdr->addr[0] = lower_32_bits(dma);
-+	cbdr->addr[1] = upper_32_bits(dma);
-+
-+	dma_size = cpu_to_le16(data_size);
-+	cbdr->length = dma_size;
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	counters->matching_frames_count =
-+			((u64)le32_to_cpu(sfi_counter_data->matchh) << 32)
-+			+ sfi_counter_data->matchl;
-+
-+	counters->not_passing_sdu_count =
-+			((u64)le32_to_cpu(sfi_counter_data->msdu_droph) << 32)
-+			+ sfi_counter_data->msdu_dropl;
-+
-+	counters->passing_sdu_count = counters->matching_frames_count
-+				- counters->not_passing_sdu_count;
-+
-+	counters->not_passing_frames_count =
-+		((u64)le32_to_cpu(sfi_counter_data->stream_gate_droph) << 32)
-+		+ le32_to_cpu(sfi_counter_data->stream_gate_dropl);
-+
-+	counters->passing_frames_count = counters->matching_frames_count
-+				- counters->not_passing_sdu_count
-+				- counters->not_passing_frames_count;
-+
-+	counters->red_frames_count =
-+		((u64)le32_to_cpu(sfi_counter_data->flow_meter_droph) << 32)
-+		+ le32_to_cpu(sfi_counter_data->flow_meter_dropl);
-+
-+	memset(cbdr, 0, sizeof(*cbdr));
-+	return 0;
-+}
-+
-+/* CBD Class 9: Stream Gate Instance Table Entry Set
-+ * Descriptor - Short Format
-+ */
-+int enetc_qci_sgi_set(struct net_device *ndev, u32 index,
-+		      struct tsn_qci_psfp_sgi_conf *tsn_qci_sgi)
-+{
-+	struct enetc_cbd *cbdr, *cbdr_sgcl;
-+	struct sgi_table *sgi_config;
-+	struct sgcl_conf *sgcl_config;
-+	struct sgcl_data *sgcl_data;
-+	struct sgce *sgce;
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+
-+	dma_addr_t dma;
-+	u16 data_size, dma_size;
-+	int curr_cbd, i;
-+
-+	/* disable first */
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+	memset(cbdr, 0, sizeof(*cbdr));
-+
-+	cbdr->index = cpu_to_le16(index);
-+	cbdr->cmd = 0;
-+	cbdr->cls = BDCR_CMD_STREAM_GCL;
-+	cbdr->status_flags = 0x80;
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	if (!tsn_qci_sgi->gate_enabled) {
-+		memset(cbdr, 0, sizeof(*cbdr));
-+		return 0;
-+	}
-+
-+	/* Re-enable */
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+	memset(cbdr, 0, sizeof(*cbdr));
-+
-+	cbdr->index = cpu_to_le16(index);
-+	cbdr->cmd = 0;
-+	cbdr->cls = BDCR_CMD_STREAM_GCL;
-+	cbdr->status_flags = 0x80;
-+
-+	sgi_config = &cbdr->sgi_table;
-+
-+	sgi_config->ocgtst = tsn_qci_sgi->admin.control_list_length ?
-+			0x80 : (tsn_qci_sgi->admin.gate_states ? 0x80 : 0x0);
-+
-+	sgi_config->oipv =
-+		tsn_qci_sgi->admin.control_list_length ?
-+		0x0 : ((tsn_qci_sgi->admin.init_ipv < 0) ?
-+		       0x0 : ((tsn_qci_sgi->admin.init_ipv & 0x7) | 0x8));
-+
-+	sgi_config->en = 0x80;
-+
-+	if (tsn_qci_sgi->block_invalid_rx_enable)
-+		sgi_config->gset |= 0x80;
-+	if (tsn_qci_sgi->block_invalid_rx)
-+		sgi_config->gset |= 0x40;
-+	if (tsn_qci_sgi->block_octets_exceeded)
-+		sgi_config->gset |= 0x10;
-+	if (tsn_qci_sgi->block_octets_exceeded_enable)
-+		sgi_config->gset |= 0x20;
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	if (tsn_qci_sgi->admin.control_list_length == 0)
-+		goto exit;
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr_sgcl);
-+	memset(cbdr, 0, sizeof(*cbdr));
-+
-+	cbdr_sgcl->index = cpu_to_le16(index);
-+	cbdr_sgcl->cmd = 1;
-+	cbdr_sgcl->cls = BDCR_CMD_STREAM_GCL;
-+	cbdr_sgcl->status_flags = 0;
-+
-+	sgcl_config = &cbdr_sgcl->sgcl_conf;
-+
-+	/* tsn_qci_sgi->admin.control_list_length is not zero now */
-+	if (tsn_qci_sgi->admin.control_list_length > 4)
-+		return -EINVAL;
-+
-+	sgcl_config->acl_len =
-+		(tsn_qci_sgi->admin.control_list_length - 1) & 0x3;
-+
-+	data_size = sizeof(struct sgcl_data) +
-+		(sgcl_config->acl_len + 1) * sizeof(struct sgce);
-+
-+	sgcl_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
-+	if (!sgcl_data)
-+		return -ENOMEM;
-+
-+	dma_size = cpu_to_le16(data_size);
-+	cbdr_sgcl->length = dma_size;
-+
-+	dma = dma_map_single(&priv->si->pdev->dev,
-+			     sgcl_data, data_size,
-+			     DMA_FROM_DEVICE);
-+	if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
-+		netdev_err(priv->si->ndev, "DMA mapping failed!\n");
-+		memset(cbdr, 0, sizeof(*cbdr));
-+		memset(cbdr_sgcl, 0, sizeof(*cbdr_sgcl));
-+		kfree(sgcl_data);
-+		return -ENOMEM;
-+	}
-+	cbdr_sgcl->addr[0] = lower_32_bits(dma);
-+	cbdr_sgcl->addr[1] = upper_32_bits(dma);
-+
-+	sgce = (struct sgce *)(sgcl_data + 1);
-+
-+	if (tsn_qci_sgi->admin.gate_states)
-+		sgcl_config->agtst = 0x80;
-+
-+	sgcl_data->ct = cpu_to_le32(tsn_qci_sgi->admin.cycle_time);
-+	sgcl_data->cte = cpu_to_le32(tsn_qci_sgi->admin.cycle_time_extension);
-+
-+	if (tsn_qci_sgi->admin.init_ipv >= 0)
-+		sgcl_config->aipv = (tsn_qci_sgi->admin.init_ipv & 0x7) | 0x8;
-+
-+	for (i = 0; i < tsn_qci_sgi->admin.control_list_length; i++) {
-+		struct tsn_qci_psfp_gcl *temp_sgcl = tsn_qci_sgi->admin.gcl + i;
-+		struct sgce *temp_entry = (struct sgce *)(sgce + i);
-+
-+		if (temp_sgcl->gate_state)
-+			temp_entry->multi |= 0x10;
-+
-+		if (temp_sgcl->ipv >= 0)
-+			temp_entry->multi |= ((temp_sgcl->ipv & 0x7) << 5)
-+						| 0x08;
-+
-+		if (temp_sgcl->octet_max)
-+			temp_entry->multi |= 0x01;
-+
-+		temp_entry->interval = cpu_to_le32(temp_sgcl->time_interval);
-+		temp_entry->msdu[0] = temp_sgcl->octet_max & 0xFF;
-+		temp_entry->msdu[1] = (temp_sgcl->octet_max >> 8) & 0xFF;
-+		temp_entry->msdu[2] = (temp_sgcl->octet_max >> 16) & 0xFF;
-+	}
-+
-+	if (!tsn_qci_sgi->admin.base_time) {
-+		sgcl_data->btl =
-+			cpu_to_le32(enetc_rd(&priv->si->hw, ENETC_SICTR0));
-+		sgcl_data->bth =
-+			cpu_to_le32(enetc_rd(&priv->si->hw, ENETC_SICTR1));
-+	} else {
-+		u32 tempu, templ;
-+
-+		tempu = upper_32_bits(tsn_qci_sgi->admin.base_time);
-+		templ = lower_32_bits(tsn_qci_sgi->admin.base_time);
-+		sgcl_data->bth = cpu_to_le32(tempu);
-+		sgcl_data->btl = cpu_to_le32(templ);
-+	}
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	memset(cbdr_sgcl, 0, sizeof(*cbdr_sgcl));
-+	kfree(sgcl_data);
-+
-+exit:
-+	memset(cbdr, 0, sizeof(*cbdr));
-+	return 0;
-+}
-+
-+/* CBD Class 9: Stream Gate Instance Table Entry Query
-+ * Descriptor - Short Format
-+ */
-+int enetc_qci_sgi_get(struct net_device *ndev, u32 index,
-+		      struct tsn_qci_psfp_sgi_conf *tsn_qci_sgi)
-+{
-+	struct enetc_cbd *cbdr, *cbdr_sgcl;
-+	struct sgi_table *sgi_config;
-+	struct sgcl_query *sgcl_query;
-+	struct sgcl_query_resp *sgcl_data;
-+	struct sgce *sgce;
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	dma_addr_t dma;
-+	u16 data_size, dma_size, gcl_data_stat = 0;
-+	u8 admin_len = 0;
-+	int curr_cbd, i;
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+
-+	cbdr->index = cpu_to_le16(index);
-+	cbdr->cmd = 2;
-+	cbdr->cls = BDCR_CMD_STREAM_GCL;
-+	cbdr->status_flags = 0x80;
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	sgi_config = &cbdr->sgi_table;
-+
-+	tsn_qci_sgi->admin.gate_states = (sgi_config->ocgtst & 0x80) ?
-+						true : false;
-+	if (sgi_config->oipv & 0x08)
-+		tsn_qci_sgi->admin.init_ipv = sgi_config->oipv & 0x7;
-+	else
-+		tsn_qci_sgi->admin.init_ipv = -1;
-+
-+	if (sgi_config->en & 0x80)
-+		tsn_qci_sgi->gate_enabled = true;
-+	if (sgi_config->gset & 0x80)
-+		tsn_qci_sgi->block_invalid_rx_enable = true;
-+	if (sgi_config->gset & 0x40)
-+		tsn_qci_sgi->block_invalid_rx = true;
-+	if (sgi_config->gset & 0x20)
-+		tsn_qci_sgi->block_octets_exceeded_enable = true;
-+	if (sgi_config->gset & 0x10)
-+		tsn_qci_sgi->block_octets_exceeded = true;
-+
-+	/* Check gate list length is zero? */
-+	if (!(sgi_config->oacl_len & 0x30)) {
-+		tsn_qci_sgi->admin.control_list_length = 0;
-+		goto exit;
-+	}
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr_sgcl);
-+
-+	cbdr_sgcl->index = cpu_to_le16(index);
-+	cbdr_sgcl->cmd = 3;
-+	cbdr_sgcl->cls = BDCR_CMD_STREAM_GCL;
-+	cbdr_sgcl->status_flags = 0;
-+
-+	data_size = sizeof(struct sgcl_query_resp) + 4 * sizeof(struct sgce);
-+
-+	sgcl_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
-+	if (!sgcl_data)
-+		return -ENOMEM;
-+
-+	dma_size = cpu_to_le16(data_size);
-+	cbdr_sgcl->length = dma_size;
-+	cbdr_sgcl->status_flags = 0;
-+
-+	sgcl_query = &cbdr_sgcl->sgcl_query;
-+
-+	sgcl_query->oacl_len = 0x10;
-+
-+	dma = dma_map_single(&priv->si->pdev->dev, sgcl_data,
-+			     data_size, DMA_FROM_DEVICE);
-+	if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
-+		netdev_err(priv->si->ndev, "DMA mapping failed!\n");
-+		memset(cbdr, 0, sizeof(*cbdr));
-+		memset(cbdr_sgcl, 0, sizeof(*cbdr_sgcl));
-+		kfree(sgcl_data);
-+		return -ENOMEM;
-+	}
-+	cbdr_sgcl->addr[0] = lower_32_bits(dma);
-+	cbdr_sgcl->addr[1] = upper_32_bits(dma);
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	sgce = (struct sgce *)(sgcl_data + 1);
-+
-+	gcl_data_stat = le16_to_cpu(sgcl_data->stat);
-+	if (gcl_data_stat & 0x10)
-+		tsn_qci_sgi->admin.gate_states = true;
-+
-+	if (gcl_data_stat & 0x80)
-+		tsn_qci_sgi->admin.init_ipv = gcl_data_stat & 0x7;
-+	else
-+		tsn_qci_sgi->admin.init_ipv = -1;
-+
-+	/* admin_len can also get from gcl_data_stat bit 5,6
-+	 * OR sgi_config->oacl_len
-+	 */
-+	admin_len = (sgcl_query->oacl_len & 0x3) + 1;
-+	tsn_qci_sgi->admin.control_list_length = admin_len;
-+	tsn_qci_sgi->admin.cycle_time = le32_to_cpu(sgcl_data->act);
-+	tsn_qci_sgi->admin.cycle_time_extension = le32_to_cpu(sgcl_data->acte);
-+	tsn_qci_sgi->admin.base_time = ((u64)(le32_to_cpu(sgcl_data->abth))
-+					      << 32)
-+					+ le32_to_cpu(sgcl_data->abtl);
-+
-+	tsn_qci_sgi->admin.gcl = kcalloc(admin_len,
-+					 sizeof(struct tsn_qci_psfp_gcl),
-+					 GFP_KERNEL);
-+	if (!tsn_qci_sgi->admin.gcl) {
-+		kfree(sgcl_data);
-+		return -ENOMEM;
-+	}
-+
-+	for (i = 0; i < admin_len; i++) {
-+		struct tsn_qci_psfp_gcl *temp_sgcl = tsn_qci_sgi->admin.gcl + i;
-+		struct sgce *temp_entry = (struct sgce *)(sgce + i);
-+
-+		if (temp_entry->multi & 0x10)
-+			temp_sgcl->gate_state = true;
-+
-+		if (temp_entry->multi & 0x08)
-+			temp_sgcl->ipv = temp_entry->multi >> 5;
-+		else
-+			temp_sgcl->ipv = -1;
-+
-+		temp_sgcl->time_interval = le32_to_cpu(temp_entry->interval);
-+
-+		if (temp_entry->multi & 0x01)
-+			temp_sgcl->octet_max = (temp_entry->msdu[0] & 0xff)
-+				| (((u32)temp_entry->msdu[1] << 8) & 0xff00)
-+				| (((u32)temp_entry->msdu[1] << 16) & 0xff0000);
-+		else
-+			temp_sgcl->octet_max = 0;
-+	}
-+
-+	memset(cbdr_sgcl, 0, sizeof(*cbdr_sgcl));
-+	kfree(sgcl_data);
-+
-+exit:
-+	memset(cbdr, 0, sizeof(*cbdr));
-+	return 0;
-+}
-+
-+/* CBD Class 9: Stream Gate Instance Table Entry Query Descriptor
-+ * CBD Class 9: Stream Gate Control List Query Descriptor
-+ */
-+int enetc_qci_sgi_status_get(struct net_device *ndev, u16 index,
-+			     struct tsn_psfp_sgi_status *status)
-+{
-+	struct enetc_cbd *cbdr_sgi, *cbdr_sgcl;
-+	struct sgi_table *sgi_config;
-+	struct sgcl_query *sgcl_query;
-+	struct sgcl_query_resp *sgcl_data;
-+	struct sgce *sgce;
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	dma_addr_t dma;
-+	u16 data_size, dma_size, gcl_data_stat = 0;
-+	u8 oper_len = 0;
-+	int curr_cbd, i;
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr_sgi);
-+
-+	cbdr_sgi->index = cpu_to_le16(index);
-+	cbdr_sgi->cmd = 2;
-+	cbdr_sgi->cls = BDCR_CMD_STREAM_GCL;
-+	cbdr_sgi->status_flags = 0x80;
-+
-+	sgi_config = &cbdr_sgi->sgi_table;
-+
-+	if (sgi_config->gset & 0x4)
-+		status->config_pending = true;
-+
-+	status->oper.gate_states = ((sgi_config->ocgtst & 0x80) ? true : false);
-+
-+	/* Check gate list length is zero */
-+	if (!(sgi_config->oacl_len & 0x30)) {
-+		status->oper.control_list_length = 0;
-+		goto cmd2quit;
-+	}
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr_sgcl);
-+
-+	cbdr_sgcl->index = cpu_to_le16(index);
-+	cbdr_sgcl->cmd = 3;
-+	cbdr_sgcl->cls = BDCR_CMD_STREAM_GCL;
-+	cbdr_sgcl->status_flags = 0;
-+
-+	/* Max size */
-+	data_size = sizeof(struct sgcl_query_resp) + 4 * sizeof(struct sgce);
-+
-+	sgcl_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
-+	if (!sgcl_data)
-+		return -ENOMEM;
-+
-+	dma_size = cpu_to_le16(data_size);
-+	cbdr_sgcl->length = dma_size;
-+	cbdr_sgcl->status_flags = 0;
-+
-+	sgcl_query = &cbdr_sgcl->sgcl_query;
-+
-+	sgcl_query->oacl_len = 0x20;
-+
-+	dma = dma_map_single(&priv->si->pdev->dev, sgcl_data,
-+			     data_size, DMA_FROM_DEVICE);
-+	if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
-+		netdev_err(priv->si->ndev, "DMA mapping failed!\n");
-+		memset(cbdr_sgi, 0, sizeof(*cbdr_sgi));
-+		memset(cbdr_sgcl, 0, sizeof(*cbdr_sgcl));
-+		kfree(sgcl_data);
-+		return -ENOMEM;
-+	}
-+	cbdr_sgcl->addr[0] = lower_32_bits(dma);
-+	cbdr_sgcl->addr[1] = upper_32_bits(dma);
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	sgce = (struct sgce *)(sgcl_data + 1);
-+
-+	/* oper_len can also get from gcl_data_stat bit 5,6
-+	 * OR sgi_config->oacl_len
-+	 */
-+	oper_len = ((sgcl_query->oacl_len & 0x0c) >> 2) + 1;
-+
-+	/* Get Stream Gate Control List */
-+	status->oper.cycle_time = le32_to_cpu(sgcl_data->oct);
-+	status->oper.cycle_time_extension = le32_to_cpu(sgcl_data->octe);
-+	status->oper.base_time = le32_to_cpu(sgcl_data->obtl)
-+				+ ((u64)le32_to_cpu(sgcl_data->obth) << 32);
-+	status->oper.control_list_length = oper_len;
-+
-+	gcl_data_stat = le16_to_cpu(sgcl_data->stat);
-+	if (gcl_data_stat & 0x400)
-+		status->oper.init_ipv = gcl_data_stat & 0x38 >> 7;
-+	else
-+		status->oper.init_ipv = -1;
-+
-+	if (gcl_data_stat & 0x800)
-+		status->oper.gate_states = true;
-+
-+	status->oper.gcl = kcalloc(oper_len,
-+				   sizeof(struct tsn_qci_psfp_gcl),
-+				   GFP_KERNEL);
-+	if (!status->oper.gcl) {
-+		memset(cbdr_sgi, 0, sizeof(*cbdr_sgi));
-+		memset(cbdr_sgcl, 0, sizeof(*cbdr_sgcl));
-+		kfree(sgcl_data);
-+		return -ENOMEM;
-+	}
-+
-+	for (i = 0; i < oper_len; i++) {
-+		struct tsn_qci_psfp_gcl *temp_sgcl = status->oper.gcl + i;
-+		struct sgce *temp_entry = (struct sgce *)(sgce + i);
-+
-+		if (temp_entry->multi & 0x10)
-+			temp_sgcl->gate_state = true;
-+
-+		if (temp_entry->multi & 0x08)
-+			temp_sgcl->ipv = temp_entry->multi >> 5;
-+		else
-+			temp_sgcl->ipv = -1;
-+
-+		temp_sgcl->time_interval = le32_to_cpu(temp_entry->interval);
-+
-+		if (temp_entry->multi & 0x01)
-+			temp_sgcl->octet_max = temp_entry->msdu[0]
-+					| ((((u32)temp_entry->msdu[1]) << 8)
-+					   & 0xff00)
-+					| ((((u32)temp_entry->msdu[2]) << 16)
-+					   & 0xff0000);
-+		else
-+			temp_sgcl->octet_max = 0;
-+	}
-+
-+	status->config_change_time = le32_to_cpu(sgcl_data->cctl)
-+				+ ((u64)le32_to_cpu(sgcl_data->ccth) << 32);
-+
-+	memset(cbdr_sgcl, 0, sizeof(*cbdr_sgcl));
-+	kfree(sgcl_data);
-+
-+cmd2quit:
-+	/* changed to SITGTGR */
-+	status->tick_granularity = enetc_rd(&priv->si->hw, ENETC_SITGTGR);
-+
-+	/* current time */
-+	status->current_time = get_current_time(priv->si);
-+
-+	memset(cbdr_sgi, 0, sizeof(*cbdr_sgi));
-+
-+	return 0;
-+}
-+
-+/* CBD Class 10: Flow Meter Instance Set Descriptor - Short Format */
-+int enetc_qci_fmi_set(struct net_device *ndev, u32 index, bool enable,
-+		      struct tsn_qci_psfp_fmi *tsn_qci_fmi)
-+{
-+	struct enetc_cbd *cbdr;
-+	struct fmi_conf *fmi_config;
-+
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	int curr_cbd;
-+	u64 temp = 0;
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+
-+	cbdr->index = cpu_to_le16((u16)index);
-+	cbdr->cmd = 0;
-+	cbdr->cls = BDCR_CMD_FLOW_METER;
-+	cbdr->status_flags = 0x80;
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	if (!enable) {
-+		memset(cbdr, 0, sizeof(*cbdr));
-+		return 0;
-+	}
-+
-+	/* Re-enable */
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+	memset(cbdr, 0, sizeof(*cbdr));
-+	cbdr->index = cpu_to_le16((u16)index);
-+	cbdr->cmd = 0;
-+	cbdr->cls = BDCR_CMD_FLOW_METER;
-+	cbdr->status_flags = 0x80;
-+
-+	fmi_config = &cbdr->fmi_conf;
-+	fmi_config->en = 0x80;
-+	if (tsn_qci_fmi->cir) {
-+		temp = (u64)1000 * tsn_qci_fmi->cir;
-+		temp = temp / 3725;
-+	}
-+	fmi_config->cir = cpu_to_le32((u32)temp);
-+	fmi_config->cbs = cpu_to_le32(tsn_qci_fmi->cbs);
-+	temp = 0;
-+	if (tsn_qci_fmi->eir) {
-+		temp = (u64)1000 * tsn_qci_fmi->eir;
-+		temp = temp / 3725;
-+	}
-+	fmi_config->eir = cpu_to_le32((u32)temp);
-+	fmi_config->ebs = cpu_to_le32(tsn_qci_fmi->ebs);
-+
-+	if (tsn_qci_fmi->mark_red)
-+		fmi_config->conf |= 0x1;
-+
-+	if (tsn_qci_fmi->mark_red_enable)
-+		fmi_config->conf |= 0x2;
-+
-+	if (tsn_qci_fmi->drop_on_yellow)
-+		fmi_config->conf |= 0x4;
-+
-+	if (tsn_qci_fmi->cm)
-+		fmi_config->conf |= 0x8;
-+
-+	if (tsn_qci_fmi->cf)
-+		fmi_config->conf |= 0x10;
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	memset(cbdr, 0, sizeof(*cbdr));
-+	return 0;
-+}
-+
-+/* CBD Class 10: Flow Meter Instance Query Descriptor - Short Format */
-+int enetc_qci_fmi_get(struct net_device *ndev, u32 index,
-+		      struct tsn_qci_psfp_fmi *tsn_qci_fmi,
-+		      struct tsn_qci_psfp_fmi_counters *counters)
-+{
-+	struct enetc_cbd *cbdr;
-+	struct fmi_conf *fmi_config;
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	int curr_cbd;
-+	u16 data_size, dma_size;
-+	dma_addr_t dma;
-+	struct fmi_query_stat_resp *fmi_counter_data;
-+	u64 temp = 0;
-+
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+
-+	cbdr->index = cpu_to_le16(index);
-+	cbdr->cmd = 1;
-+	cbdr->cls = BDCR_CMD_FLOW_METER;
-+	cbdr->status_flags = 0x80;
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	fmi_config = &cbdr->fmi_conf;
-+	if (fmi_config->cir) {
-+		temp = (u64)3725 * fmi_config->cir;
-+		temp = temp / 1000;
-+	}
-+	tsn_qci_fmi->cir = le32_to_cpu((u32)temp);
-+	tsn_qci_fmi->cbs = le32_to_cpu(fmi_config->cbs);
-+	temp = 0;
-+	if (fmi_config->eir) {
-+		temp = (u64)3725 * fmi_config->eir;
-+		temp = temp / 1000;
-+	}
-+	tsn_qci_fmi->eir = le32_to_cpu((u32)temp);
-+	tsn_qci_fmi->ebs = le32_to_cpu(fmi_config->ebs);
-+
-+	if (fmi_config->conf & 0x1)
-+		tsn_qci_fmi->mark_red = true;
-+
-+	if (fmi_config->conf & 0x2)
-+		tsn_qci_fmi->mark_red_enable = true;
-+
-+	if (fmi_config->conf & 0x4)
-+		tsn_qci_fmi->drop_on_yellow = true;
-+
-+	if (fmi_config->conf & 0x8)
-+		tsn_qci_fmi->cm = true;
-+
-+	if (fmi_config->conf & 0x10)
-+		tsn_qci_fmi->cf = true;
-+
-+	memset(cbdr, 0, sizeof(*cbdr));
-+
-+	/* Get counters */
-+	curr_cbd = alloc_cbdr(priv->si, &cbdr);
-+
-+	cbdr->index = cpu_to_le16(index);
-+	cbdr->cmd = 2;
-+	cbdr->cls = BDCR_CMD_FLOW_METER;
-+	cbdr->status_flags = 0x0;
-+
-+	data_size = sizeof(struct fmi_query_stat_resp);
-+	fmi_counter_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
-+	if (!fmi_counter_data)
-+		return -ENOMEM;
-+
-+	dma = dma_map_single(&priv->si->pdev->dev, fmi_counter_data,
-+			     data_size, DMA_FROM_DEVICE);
-+	if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
-+		netdev_err(priv->si->ndev, "DMA mapping failed!\n");
-+		kfree(fmi_counter_data);
-+		return -ENOMEM;
-+	}
-+	cbdr->addr[0] = lower_32_bits(dma);
-+	cbdr->addr[1] = upper_32_bits(dma);
-+
-+	dma_size = cpu_to_le16(data_size);
-+	cbdr->length = dma_size;
-+
-+	xmit_cbdr(priv->si, curr_cbd);
-+
-+	memcpy(counters, fmi_counter_data, sizeof(*counters));
-+
-+	return 0;
-+}
-+
-+int enetc_qbu_set(struct net_device *ndev, u8 ptvector)
-+{
-+	u32 temp;
-+	int i;
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+
-+	temp = enetc_rd(&priv->si->hw, ENETC_QBV_PTGCR_OFFSET);
-+	if (temp & ENETC_QBV_TGE)
-+		enetc_wr(&priv->si->hw, ENETC_QBV_PTGCR_OFFSET,
-+			 temp & (~ENETC_QBV_TGPE));
-+
-+	for (i = 0; i < 8; i++) {
-+		/* 1 Enabled. Traffic is transmitted on the preemptive MAC. */
-+		temp = enetc_port_rd(&priv->si->hw, ENETC_PTCFPR(i));
-+
-+		if ((ptvector >> i) & 0x1)
-+			enetc_port_wr(&priv->si->hw,
-+				      ENETC_PTCFPR(i),
-+				      temp | ENETC_FPE);
-+		else
-+			enetc_port_wr(&priv->si->hw,
-+				      ENETC_PTCFPR(i),
-+				      temp & ~ENETC_FPE);
-+	}
-+
-+	return 0;
-+}
-+
-+int enetc_qbu_get(struct net_device *ndev,
-+		  struct tsn_preempt_status *preemptstat)
-+{
-+	int i;
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+
-+	if (enetc_port_rd(&priv->si->hw, ENETC_PFPMR) & ENETC_PFPMR_PMACE) {
-+		preemptstat->preemption_active = true;
-+		if (enetc_rd(&priv->si->hw, ENETC_QBV_PTGCR_OFFSET)
-+							& ENETC_QBV_TGE)
-+			preemptstat->hold_request = 1;
-+		else
-+			preemptstat->hold_request = 2;
-+	} else {
-+		preemptstat->preemption_active = false;
-+		return 0;
-+	}
-+
-+	for (i = 0; i < 8; i++)
-+		if (enetc_port_rd(&priv->si->hw, ENETC_PTCFPR(i)) & 0x80000000)
-+			preemptstat->admin_state |= 1 << i;
-+
-+	preemptstat->hold_advance =
-+		enetc_rd(&priv->si->hw, ENETC_QBV_PTGCR_OFFSET) & 0xFFFF;
-+	preemptstat->release_advance =
-+		enetc_rd(&priv->si->hw, ENETC_QBV_PTGCR_OFFSET) & 0xFFFF;
-+
-+	return 0;
-+}
-+
-+u32 __enetc_tsn_get_cap(struct enetc_si *si)
-+{
-+	u32 reg = 0;
-+	u32 cap = 0;
-+
-+	reg = enetc_port_rd(&si->hw, ENETC_PCAPR0);
-+
-+	if (reg & ENETC_PCAPR0_PSFP)
-+		cap |= TSN_CAP_QCI;
-+
-+	if (reg & ENETC_PCAPR0_TSN)
-+		cap |= TSN_CAP_QBV;
-+
-+	if (reg & ENETC_PCAPR0_QBU)
-+		cap |= TSN_CAP_QBU;
-+
-+	cap |= TSN_CAP_CBS;
-+	cap |= TSN_CAP_TBS;
-+
-+	return cap;
-+}
-+
-+u32 enetc_tsn_get_capability(struct net_device *ndev)
-+{
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+
-+	return __enetc_tsn_get_cap(priv->si);
-+}
-+
-+static int  __enetc_get_max_cap(struct enetc_si *si,
-+				struct tsn_qci_psfp_stream_param *stream_para)
-+{
-+	u32 reg = 0;
-+
-+	/* Port stream filter capability */
-+	reg = enetc_port_rd(&si->hw, ENETC_PSFCAPR);
-+	stream_para->max_sf_instance = reg & ENETC_PSFCAPR_MSK;
-+	/* Port stream filter capability */
-+	reg = enetc_port_rd(&si->hw, ENETC_PSGCAPR);
-+	stream_para->max_sg_instance = (reg & ENETC_PSGCAPR_SGIT_MSK);
-+	stream_para->supported_list_max = (reg & ENETC_PSGCAPR_GCL_MSK) >> 16;
-+	/* Port flow meter capability */
-+	reg = enetc_port_rd(&si->hw, ENETC_PFMCAPR);
-+	stream_para->max_fm_instance = reg & ENETC_PFMCAPR_MSK;
-+
-+	return 0;
-+}
-+
-+int enetc_get_max_cap(struct net_device *ndev,
-+		      struct tsn_qci_psfp_stream_param *stream_para)
-+{
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+
-+	return __enetc_get_max_cap(priv->si, stream_para);
-+}
-+
-+static int enetc_set_cbs(struct net_device *ndev, u8 tc, u8 bw)
-+{
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	struct enetc_si *si = priv->si;
-+	struct enetc_cbs *ecbs = si->ecbs;
-+	struct cbs *cbs;
-+
-+	int bw_sum = 0;
-+	u32 port_transmit_rate;
-+	u32 port_frame_max_size;
-+	u8 tc_nums;
-+	int i;
-+
-+	u32 max_interfrence_size;
-+	u32 send_slope;
-+	u32 hi_credit;
-+
-+	if (!ecbs)
-+		return -ENOMEM;
-+
-+	port_transmit_rate = get_ndev_speed(si->ndev);
-+	if (port_transmit_rate != ecbs->port_transmit_rate)
-+		ecbs->port_transmit_rate = port_transmit_rate;
-+	port_frame_max_size = ecbs->port_max_size_frame;
-+	tc_nums = ecbs->tc_nums;
-+	cbs = ecbs->cbs;
-+
-+	if (tc >= tc_nums) {
-+		dev_err(&ndev->dev, "Make sure the TC less than %d\n", tc_nums);
-+		return -EINVAL;
-+	}
-+
-+	if (!bw) {
-+		if (cbs[tc].enable) {
-+			/* Make sure the other TC that are numerically
-+			 * lower than this TC have been disabled.
-+			 */
-+			for (i = 0; i < tc; i++) {
-+				if (cbs[i].enable)
-+					break;
-+			}
-+			if (i < tc) {
-+				dev_err(&ndev->dev,
-+					"TC%d has been disabled first\n", i);
-+				return -EINVAL;
-+			}
-+			memset(&cbs[tc], 0, sizeof(*cbs));
-+			cbs[tc].enable = false;
-+			enetc_port_wr(&si->hw, ENETC_PTCCBSR1(tc), 0);
-+			enetc_port_wr(&si->hw, ENETC_PTCCBSR0(tc), 0);
-+		}
-+		return 0;
-+	}
-+
-+	/* Make sure the other TC that are numerically
-+	 * higher than this TC have been enabled.
-+	 */
-+	for (i = tc_nums - 1; i > tc; i--) {
-+		if (!cbs[i].enable) {
-+			dev_err(&ndev->dev,
-+				"TC%d has been enabled first\n", i);
-+			return -EINVAL;
-+		}
-+		bw_sum += cbs[i].bw;
-+	}
-+
-+	if (bw_sum + bw >= 100) {
-+		dev_err(&ndev->dev,
-+			"The sum of all CBS Bandwidth cann't exceed 100\n");
-+		return -EINVAL;
-+	}
-+
-+	cbs[tc].bw = bw;
-+	cbs[tc].tc_max_sized_frame = enetc_port_rd(&si->hw, ENETC_PTCMSDUR(tc));
-+	cbs[tc].idle_slope = port_transmit_rate / 100 * bw;
-+	cbs[tc].send_slope = port_transmit_rate - cbs[tc].idle_slope;
-+
-+	/* For TC7, the max_interfrence_size is ENETC_MAC_MAXFRM_SIZE.
-+	 * For TC6, the max_interfrence_size is calculated as below:
-+	 *
-+	 *      max_interfrence_size = (M0 + Ma + Ra * M0 / (R0 - Ra))
-+	 *
-+	 * For other traffic class, for example SR class Q:
-+	 *
-+	 *                            R0 * (M0 + Ma + ... + Mp)
-+	 *      max_interfrence_size =  ------------------------------
-+	 *                            (R0 - Ra) + ... + (R0 - Rp)
-+	 *
-+	 */
-+
-+	if (tc == tc_nums - 1) {
-+		cbs[tc].max_interfrence_size = port_frame_max_size * 8;
-+
-+	} else if (tc == tc_nums - 2) {
-+		cbs[tc].max_interfrence_size = (port_frame_max_size
-+				+ cbs[tc + 1].tc_max_sized_frame
-+				+ port_frame_max_size * (cbs[tc + 1].idle_slope
-+				/ cbs[tc + 1].send_slope)) * 8;
-+	} else {
-+		max_interfrence_size = port_frame_max_size;
-+		send_slope = 0;
-+		for (i = tc + 1; i < tc_nums; i++) {
-+			send_slope += cbs[i].send_slope;
-+			max_interfrence_size += cbs[i].tc_max_sized_frame;
-+		}
-+		max_interfrence_size = ((u64)port_transmit_rate
-+				* max_interfrence_size) / send_slope;
-+		cbs[tc].max_interfrence_size = max_interfrence_size * 8;
-+	}
-+
-+	cbs[tc].hi_credit = cbs[tc].max_interfrence_size * cbs[tc].bw / 100;
-+	cbs[tc].lo_credit = cbs[tc].tc_max_sized_frame * (cbs[tc].send_slope
-+			/ port_transmit_rate);
-+	cbs[tc].tc = tc;
-+
-+	hi_credit = (ENETC_CLK * 100L) * (u64)cbs[tc].hi_credit
-+			/ port_transmit_rate;
-+	enetc_port_wr(&si->hw, ENETC_PTCCBSR1(tc), hi_credit);
-+
-+	/* Set bw register and enable this traffic class*/
-+	enetc_port_wr(&si->hw, ENETC_PTCCBSR0(tc),
-+		      (cbs[tc].bw & 0x7F) | (1 << 31));
-+	cbs[tc].enable = true;
-+
-+	return 0;
-+}
-+
-+static int enetc_get_cbs(struct net_device *ndev, u8 tc)
-+{
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	struct enetc_si *si = priv->si;
-+	struct enetc_cbs *ecbs = si->ecbs;
-+	struct cbs *cbs;
-+
-+	if (!ecbs)
-+		return -ENOMEM;
-+	cbs = ecbs->cbs;
-+	if (tc >= ecbs->tc_nums) {
-+		dev_err(&ndev->dev, "The maximum of TC is %d\n", ecbs->tc_nums);
-+		return -EINVAL;
-+	}
-+
-+	return cbs[tc].bw;
-+}
-+
-+static int enetc_set_tsd(struct net_device *ndev, struct tsn_tsd *ttsd)
-+{
-+	return 0;
-+}
-+
-+static int enetc_get_tsd(struct net_device *ndev, struct tsn_tsd_status *tts)
-+{
-+	return 0;
-+}
-+
-+static u32 get_ndev_speed(struct net_device *netdev)
-+{
-+	struct ethtool_link_ksettings ksettings;
-+	int rc = -1;
-+
-+	if (netdev->ethtool_ops->get_link_ksettings) {
-+		if (netdev->ethtool_ops->begin) {
-+			rc = netdev->ethtool_ops->begin(netdev);
-+			if (rc < 0)
-+				return 0;
-+		}
-+
-+		memset(&ksettings, 0, sizeof(ksettings));
-+
-+		if (!netdev->ethtool_ops->get_link_ksettings)
-+			return 0;
-+
-+		rc = netdev->ethtool_ops->get_link_ksettings(netdev,
-+							     &ksettings);
-+
-+		if (netdev->ethtool_ops->complete)
-+			netdev->ethtool_ops->complete(netdev);
-+	}
-+
-+	return (rc < 0) ? 0 : ksettings.base.speed;
-+}
-+
-+static void enetc_cbs_init(struct enetc_si *si)
-+{
-+	struct enetc_ndev_priv *priv = netdev_priv(si->ndev);
-+	u8 tc_nums;
-+
-+	tc_nums = priv->num_tx_rings;
-+	si->ecbs = kzalloc(sizeof(*si->ecbs) +
-+			   sizeof(struct cbs) * tc_nums, GFP_KERNEL);
-+	if (!si->ecbs)
-+		return;
-+
-+	si->ecbs->port_max_size_frame = si->ndev->mtu + ETH_HLEN
-+						+ VLAN_HLEN + ETH_FCS_LEN;
-+	si->ecbs->tc_nums = tc_nums;
-+	si->ecbs->port_transmit_rate = get_ndev_speed(si->ndev);
-+
-+	/*This trick is used only for CFP*/
-+	if (!si->ecbs->port_transmit_rate)
-+		si->ecbs->port_transmit_rate = 1000000000;
-+
-+	if (!si->ecbs->port_transmit_rate) {
-+		dev_err(&si->pdev->dev, "Failure to get port speed for CBS\n");
-+		kfree(si->ecbs);
-+		si->ecbs = NULL;
-+	}
-+}
-+
-+static void enetc_qbv_init(struct enetc_hw *hw)
-+{
-+	/* Set PSPEED to be 1Gbps */
-+	enetc_port_wr(hw, ENETC_PMR,
-+		      (enetc_port_rd(hw, ENETC_PMR)
-+		      & (~ENETC_PMR_PSPEED_MASK))
-+		      | ENETC_PMR_PSPEED_1000M);
-+}
-+
-+void enetc_tsn_init(struct net_device *ndev)
-+{
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	struct enetc_si *si = priv->si;
-+	u32 capability = 0;
-+
-+	capability = __enetc_tsn_get_cap(si);
-+
-+	if (capability & TSN_CAP_CBS)
-+		enetc_cbs_init(si);
-+
-+	if (capability & TSN_CAP_QBV)
-+		enetc_qbv_init(&si->hw);
-+
-+	if (capability & TSN_CAP_QCI)
-+		enetc_qci_enable(&si->hw);
-+
-+	dev_info(&si->pdev->dev, "%s: setup done\n", __func__);
-+}
-+
-+void enetc_tsn_deinit(struct net_device *ndev)
-+{
-+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
-+	struct enetc_si *si = priv->si;
-+
-+	dev_info(&si->pdev->dev, "%s: release\n", __func__);
-+}
-+
-+static struct tsn_ops enetc_tsn_ops_full = {
-+	.device_init = enetc_tsn_init,
-+	.device_deinit = enetc_tsn_deinit,
-+	.get_capability = enetc_tsn_get_capability,
-+	.qbv_set = enetc_qbv_set,
-+	.qbv_get = enetc_qbv_get,
-+	.qbv_get_status = enetc_qbv_get_status,
-+	.cb_streamid_set = enetc_cb_streamid_set,
-+	.cb_streamid_get = enetc_cb_streamid_get,
-+	.cb_streamid_counters_get = enetc_cb_streamid_counters_get,
-+	.qci_get_maxcap = enetc_get_max_cap,
-+	.qci_sfi_set = enetc_qci_sfi_set,
-+	.qci_sfi_get = enetc_qci_sfi_get,
-+	.qci_sfi_counters_get = enetc_qci_sfi_counters_get,
-+	.qci_sgi_set = enetc_qci_sgi_set,
-+	.qci_sgi_get = enetc_qci_sgi_get,
-+	.qci_sgi_status_get = enetc_qci_sgi_status_get,
-+	.qci_fmi_set = enetc_qci_fmi_set,
-+	.qci_fmi_get = enetc_qci_fmi_get,
-+	.qbu_set = enetc_qbu_set,
-+	.qbu_get = enetc_qbu_get,
-+	.cbs_set = enetc_set_cbs,
-+	.cbs_get = enetc_get_cbs,
-+	.tsd_set = enetc_set_tsd,
-+	.tsd_get = enetc_get_tsd,
-+};
-+
-+static struct tsn_ops enetc_tsn_ops_part = {
-+	.device_init = enetc_tsn_init,
-+	.device_deinit = enetc_tsn_deinit,
-+	.get_capability = enetc_tsn_get_capability,
-+	.cb_streamid_set = enetc_cb_streamid_set,
-+	.cb_streamid_get = enetc_cb_streamid_get,
-+	.cb_streamid_counters_get = enetc_cb_streamid_counters_get,
-+	.qci_get_maxcap = enetc_get_max_cap,
-+	.qci_sfi_set = enetc_qci_sfi_set,
-+	.qci_sfi_get = enetc_qci_sfi_get,
-+	.qci_sfi_counters_get = enetc_qci_sfi_counters_get,
-+	.qci_sgi_set = enetc_qci_sgi_set,
-+	.qci_sgi_get = enetc_qci_sgi_get,
-+	.qci_sgi_status_get = enetc_qci_sgi_status_get,
-+	.qci_fmi_set = enetc_qci_fmi_set,
-+	.qci_fmi_get = enetc_qci_fmi_get,
-+};
-+
-+void enetc_tsn_pf_init(struct net_device *netdev, struct pci_dev *pdev)
-+{
-+	int port = pdev->devfn & 0x7;
-+
-+	if (port == 1 || port == 3)
-+		tsn_port_register(netdev, &enetc_tsn_ops_part,
-+				  (u16)pdev->bus->number);
-+	else
-+		tsn_port_register(netdev, &enetc_tsn_ops_full,
-+				  (u16)pdev->bus->number);
-+}
-+
-+void enetc_tsn_pf_deinit(struct net_device *netdev)
-+{
-+	tsn_port_unregister(netdev);
-+}
-+#endif	/* #if IS_ENABLED(CONFIG_ENETC_TSN) */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0338-net-dsa-felix-Fix-probing-allocation-and-cleanup-pat.patch b/target/linux/layerscape/patches-5.4/701-net-0338-net-dsa-felix-Fix-probing-allocation-and-cleanup-pat.patch
deleted file mode 100644
index ec4c62a7a5..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0338-net-dsa-felix-Fix-probing-allocation-and-cleanup-pat.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From 5ae4c4ac2d992afcf4087e5f33ad7e5f7d073fbf Mon Sep 17 00:00:00 2001
-From: Claudiu Manoil <claudiu.manoil@nxp.com>
-Date: Wed, 4 Dec 2019 14:36:09 +0200
-Subject: [PATCH] net: dsa: felix: Fix probing allocation and cleanup path
-
-dsa_switch_alloc() uses managed (devm_alloc) allocation
-to alloc 'ds'.  kfree()-ing 'ds' results in memory corruption.
-kfree(ds) seems harmless on the error path, however for this
-particular device, dsa_register_swtich() deffers probing to
-allow the enetc driver to probe the master port first.
-This results in kfree(ds) being called during the first
-probing attempt of felix, followed by a NULL poiter access
-crash during enetc driver probing (when accessing its net_device).
-
-This patch fixes following crash (triggerred in the enetc driver by
-the probing routine of the felix driver):
-
-[    3.502254] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
-[    3.511073] Mem abort info:
-[    3.513874]   ESR = 0x96000044
-[    3.516936]   EC = 0x25: DABT (current EL), IL = 32 bits
-[    3.522266]   SET = 0, FnV = 0
-[    3.525327]   EA = 0, S1PTW = 0
-[    3.528476] Data abort info:
-[    3.531359]   ISV = 0, ISS = 0x00000044
-[    3.535205]   CM = 0, WnR = 1
-[    3.538182] user pgtable: 4k pages, 48-bit VAs, pgdp=00000020f612d000
-[    3.544645] [0000000000000000] pgd=0000000000000000
-[    3.549542] Internal error: Oops: 96000044 [#1] PREEMPT SMP
-[    3.555128] Modules linked in:
-[    3.558189] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.0-03552-gfa6e1cd69f80 #1
-[    3.565781] Hardware name: LS1028A RDB Board (DT)
-[    3.570496] pstate: a0000005 (NzCv daif -PAN -UAO)
-[    3.575303] pc : enetc_pf_probe+0x784/0xba8
-[    3.579495] lr : enetc_pf_probe+0x6e8/0xba8
-[    3.583686] sp : ffff80001002ba90
-[    3.587005] x29: ffff80001002ba90 x28: ffff002076130c08
-[    3.592331] x27: 0000000000000002 x26: ffff002076130c80
-[    3.597657] x25: ffff002076130c00 x24: ffff002076130c80
-[    3.602982] x23: ffffb3f2ab0ec000 x22: ffff0020760d7840
-[    3.608307] x21: ffff0020760d7000 x20: ffff002076130c00
-[    3.613632] x19: ffff800010850000 x18: ffffffffffffffff
-[    3.618957] x17: 000000007dee1586 x16: 00000000cb746ba4
-[    3.624282] x15: ffffb3f2abce9908 x14: 0000000000000000
-[    3.629608] x13: 0000000000000101 x12: 0000000000010000
-[    3.634933] x11: 00000000ffffffff x10: ffff4c2dd0136000
-[    3.640257] x9 : 0000000000000000 x8 : ffff002076122000
-[    3.645582] x7 : 0000000000000000 x6 : 000000000000003f
-[    3.650908] x5 : 0000000000000040 x4 : 0000000000000001
-[    3.656234] x3 : ffff800010850000 x2 : ffffb3f2ab0ed868
-[    3.661560] x1 : 0000000000000000 x0 : 00000000051ca556
-[    3.666886] Call trace:
-[    3.669333]  enetc_pf_probe+0x784/0xba8
-[    3.673178]  local_pci_probe+0x3c/0xa0
-[    3.676935]  pci_device_probe+0x128/0x1c0
-[    3.680954]  really_probe+0x108/0x348
-[    3.684623]  driver_probe_device+0x58/0x100
-[    3.688815]  device_driver_attach+0x6c/0x90
-[    3.693006]  __driver_attach+0x84/0xc8
-[    3.696762]  bus_for_each_dev+0x74/0xc8
-[    3.700605]  driver_attach+0x20/0x28
-[    3.704186]  bus_add_driver+0x148/0x1f0
-[    3.708029]  driver_register+0x60/0x110
-[    3.711872]  __pci_register_driver+0x40/0x48
-[    3.716153]  enetc_pf_driver_init+0x20/0x28
-[    3.720346]  do_one_initcall+0x5c/0x1b0
-[    3.724189]  kernel_init_freeable+0x1a4/0x24c
-[    3.728557]  kernel_init+0x10/0x108
-[    3.732052]  ret_from_fork+0x10/0x18
-[    3.735635] Code: f9400680 f9417ea1 91020000 b9400000 (b9000020)
-[    3.741749] ---[ end trace c8ab43e3d33fed3f ]---
-[    3.746396] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
-[    3.748522] ata1: SATA link down (SStatus 0 SControl 300)
-[    3.754077] SMP: stopping secondary CPUs
-[    3.754082] Kernel Offset: 0x33f299c00000 from 0xffff800010000000
-[    3.754083] PHYS_OFFSET: 0xfffff019c0000000
-[    3.754086] CPU features: 0x0002,21806008
-[    3.754088] Memory Limit: none
-[    3.780794] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
-
-As a result of the fix, struct felix allocation also needs to
-be converted to managed allocation (devm_alloc).
-
-Fixes: bb849431a970 ("net: dsa: ocelot: alloc memory for dsa switch instance")
-
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
----
- drivers/net/dsa/ocelot/felix.c | 7 +------
- 1 file changed, 1 insertion(+), 6 deletions(-)
-
---- a/drivers/net/dsa/ocelot/felix.c
-+++ b/drivers/net/dsa/ocelot/felix.c
-@@ -485,7 +485,7 @@ static int felix_pci_probe(struct pci_de
- 		}
- 	}
- 
--	felix = kzalloc(sizeof(struct felix), GFP_KERNEL);
-+	felix = devm_kzalloc(&pdev->dev, sizeof(*felix), GFP_KERNEL);
- 	if (!felix) {
- 		err = -ENOMEM;
- 		dev_err(&pdev->dev, "Failed to allocate driver memory\n");
-@@ -532,11 +532,9 @@ static int felix_pci_probe(struct pci_de
- 	return 0;
- 
- err_register_ds:
--	kfree(ds);
- err_alloc_ds:
- err_alloc_irq:
- err_alloc_felix:
--	kfree(felix);
- err_dma:
- 	pci_disable_device(pdev);
- err_pci_enable:
-@@ -551,9 +549,6 @@ static void felix_pci_remove(struct pci_
- 
- 	dsa_unregister_switch(felix->ds);
- 
--	kfree(felix->ds);
--	kfree(felix);
--
- 	pci_disable_device(pdev);
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0339-LF-368-net-mscc-ocelot-hard-code-VCAP_PORT_CNT-for-F.patch b/target/linux/layerscape/patches-5.4/701-net-0339-LF-368-net-mscc-ocelot-hard-code-VCAP_PORT_CNT-for-F.patch
deleted file mode 100644
index 44d97baddb..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0339-LF-368-net-mscc-ocelot-hard-code-VCAP_PORT_CNT-for-F.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 17bde33ffe50be558520a063392dc73b319a7f20 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Thu, 28 Nov 2019 11:48:24 +0800
-Subject: [PATCH] LF-368 net: mscc: ocelot: hard code VCAP_PORT_CNT for Felix
- temporarily
-
-The Felix switch supports different port number with Ocelot.
-This makes the bits mapping in TCAM entry and Action entry
-is different with Ocelot for VCAP function.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/mscc/ocelot_vcap.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/mscc/ocelot_vcap.h
-+++ b/drivers/net/ethernet/mscc/ocelot_vcap.h
-@@ -25,7 +25,7 @@
- #define VCAP_IS2_CNT 64
- #define VCAP_IS2_ENTRY_WIDTH 376
- #define VCAP_IS2_ACTION_WIDTH 99
--#define VCAP_PORT_CNT 11
-+#define VCAP_PORT_CNT 6
- 
- /* IS2 half key types */
- #define IS2_TYPE_ETYPE 0
diff --git a/target/linux/layerscape/patches-5.4/701-net-0340-LF-368-net-mscc-ocelot-make-ocelot_ace_rule-support-.patch b/target/linux/layerscape/patches-5.4/701-net-0340-LF-368-net-mscc-ocelot-make-ocelot_ace_rule-support-.patch
deleted file mode 100644
index 6628de5989..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0340-LF-368-net-mscc-ocelot-make-ocelot_ace_rule-support-.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From 79fbcc73dd52acfe8b7aa20a793ce8d60c8d3f7b Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Thu, 28 Nov 2019 12:10:44 -0600
-Subject: [PATCH] LF-368 net: mscc: ocelot: make ocelot_ace_rule support
- multiple ports
-
-The ocelot_ace_rule is port specific now. Make it flexible to
-be able to support multiple ports too.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/mscc/ocelot_ace.c    | 14 +++++++-------
- drivers/net/ethernet/mscc/ocelot_ace.h    |  4 ++--
- drivers/net/ethernet/mscc/ocelot_flower.c |  8 ++++----
- 3 files changed, 13 insertions(+), 13 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot_ace.c
-+++ b/drivers/net/ethernet/mscc/ocelot_ace.c
-@@ -352,7 +352,7 @@ static void is2_entry_set(struct ocelot
- 	data.type = IS2_ACTION_TYPE_NORMAL;
- 
- 	VCAP_KEY_ANY_SET(PAG);
--	VCAP_KEY_SET(IGR_PORT_MASK, 0, ~BIT(ace->chip_port));
-+	VCAP_KEY_SET(IGR_PORT_MASK, 0, ~ace->ingress_port_mask);
- 	VCAP_KEY_BIT_SET(FIRST, OCELOT_VCAP_BIT_1);
- 	VCAP_KEY_BIT_SET(HOST_MATCH, OCELOT_VCAP_BIT_ANY);
- 	VCAP_KEY_BIT_SET(L2_MC, ace->dmac_mc);
-@@ -576,7 +576,7 @@ static void is2_entry_set(struct ocelot
- 
- static void is2_entry_get(struct ocelot_ace_rule *rule, int ix)
- {
--	struct ocelot *op = rule->port->ocelot;
-+	struct ocelot *op = rule->ocelot;
- 	struct vcap_data data;
- 	int row = (ix / 2);
- 	u32 cnt;
-@@ -655,11 +655,11 @@ int ocelot_ace_rule_offload_add(struct o
- 	/* Move down the rules to make place for the new rule */
- 	for (i = acl_block->count - 1; i > index; i--) {
- 		ace = ocelot_ace_rule_get_rule_index(acl_block, i);
--		is2_entry_set(rule->port->ocelot, i, ace);
-+		is2_entry_set(rule->ocelot, i, ace);
- 	}
- 
- 	/* Now insert the new rule */
--	is2_entry_set(rule->port->ocelot, index, rule);
-+	is2_entry_set(rule->ocelot, index, rule);
- 	return 0;
- }
- 
-@@ -697,11 +697,11 @@ int ocelot_ace_rule_offload_del(struct o
- 	/* Move up all the blocks over the deleted rule */
- 	for (i = index; i < acl_block->count; i++) {
- 		ace = ocelot_ace_rule_get_rule_index(acl_block, i);
--		is2_entry_set(rule->port->ocelot, i, ace);
-+		is2_entry_set(rule->ocelot, i, ace);
- 	}
- 
- 	/* Now delete the last rule, because it is duplicated */
--	is2_entry_set(rule->port->ocelot, acl_block->count, &del_ace);
-+	is2_entry_set(rule->ocelot, acl_block->count, &del_ace);
- 
- 	return 0;
- }
-@@ -717,7 +717,7 @@ int ocelot_ace_rule_stats_update(struct
- 	/* After we get the result we need to clear the counters */
- 	tmp = ocelot_ace_rule_get_rule_index(acl_block, index);
- 	tmp->stats.pkts = 0;
--	is2_entry_set(rule->port->ocelot, index, tmp);
-+	is2_entry_set(rule->ocelot, index, tmp);
- 
- 	return 0;
- }
---- a/drivers/net/ethernet/mscc/ocelot_ace.h
-+++ b/drivers/net/ethernet/mscc/ocelot_ace.h
-@@ -186,14 +186,14 @@ struct ocelot_ace_stats {
- 
- struct ocelot_ace_rule {
- 	struct list_head list;
--	struct ocelot_port *port;
-+	struct ocelot *ocelot;
- 
- 	u16 prio;
- 	u32 id;
- 
- 	enum ocelot_ace_action action;
- 	struct ocelot_ace_stats stats;
--	int chip_port;
-+	u16 ingress_port_mask;
- 
- 	enum ocelot_vcap_bit dmac_mc;
- 	enum ocelot_vcap_bit dmac_bc;
---- a/drivers/net/ethernet/mscc/ocelot_flower.c
-+++ b/drivers/net/ethernet/mscc/ocelot_flower.c
-@@ -177,8 +177,8 @@ struct ocelot_ace_rule *ocelot_ace_rule_
- 	if (!rule)
- 		return NULL;
- 
--	rule->port = &block->priv->port;
--	rule->chip_port = block->priv->chip_port;
-+	rule->ocelot = block->priv->port.ocelot;
-+	rule->ingress_port_mask = BIT(block->priv->chip_port);
- 	return rule;
- }
- 
-@@ -213,7 +213,7 @@ static int ocelot_flower_destroy(struct
- 	int ret;
- 
- 	rule.prio = f->common.prio;
--	rule.port = &port_block->priv->port;
-+	rule.ocelot = port_block->priv->port.ocelot;
- 	rule.id = f->cookie;
- 
- 	ret = ocelot_ace_rule_offload_del(&rule);
-@@ -231,7 +231,7 @@ static int ocelot_flower_stats_update(st
- 	int ret;
- 
- 	rule.prio = f->common.prio;
--	rule.port = &port_block->priv->port;
-+	rule.ocelot = port_block->priv->port.ocelot;
- 	rule.id = f->cookie;
- 	ret = ocelot_ace_rule_stats_update(&rule);
- 	if (ret)
diff --git a/target/linux/layerscape/patches-5.4/701-net-0341-LF-368-net-mscc-ocelot-add-VCAP-IS2-rule-to-trap-PTP.patch b/target/linux/layerscape/patches-5.4/701-net-0341-LF-368-net-mscc-ocelot-add-VCAP-IS2-rule-to-trap-PTP.patch
deleted file mode 100644
index 817d449e01..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0341-LF-368-net-mscc-ocelot-add-VCAP-IS2-rule-to-trap-PTP.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 67ca04147efac6cac3f7490c61c817a84daada57 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Thu, 28 Nov 2019 14:42:44 +0800
-Subject: [PATCH] LF-368 net: mscc: ocelot: add VCAP IS2 rule to trap PTP
- Ethernet frames
-
-All the PTP messages over Ethernet have etype 0x88f7 on them.
-Use etype as the key to trap PTP messages.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/mscc/ocelot.c | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -2337,6 +2337,20 @@ void ocelot_set_cpu_port(struct ocelot *
- }
- EXPORT_SYMBOL(ocelot_set_cpu_port);
- 
-+/* Entry for PTP over Ethernet (etype 0x88f7)
-+ * Action: trap to CPU port
-+ */
-+static struct ocelot_ace_rule ptp_rule = {
-+	.prio		= 1,
-+	.type		= OCELOT_ACE_TYPE_ETYPE,
-+	.dmac_mc	= OCELOT_VCAP_BIT_1,
-+	.action		= OCELOT_ACL_ACTION_TRAP,
-+	.frame.etype.etype.value[0]	= 0x88,
-+	.frame.etype.etype.value[1]	= 0xf7,
-+	.frame.etype.etype.mask[0]	= 0xff,
-+	.frame.etype.etype.mask[1]	= 0xff,
-+};
-+
- int ocelot_init(struct ocelot *ocelot)
- {
- 	char queue_name[32];
-@@ -2474,6 +2488,13 @@ int ocelot_init(struct ocelot *ocelot)
- 				"Timestamp initialization failed\n");
- 			return ret;
- 		}
-+
-+		/* Available on all ingress port except CPU port */
-+		ptp_rule.ocelot = ocelot;
-+		ptp_rule.ingress_port_mask =
-+			GENMASK(ocelot->num_phys_ports - 1, 0);
-+		ptp_rule.ingress_port_mask &= ~BIT(ocelot->cpu);
-+		ocelot_ace_rule_offload_add(&ptp_rule);
- 	}
- 
- 	return 0;
-@@ -2488,6 +2509,8 @@ void ocelot_deinit(struct ocelot *ocelot
- 	cancel_delayed_work(&ocelot->stats_work);
- 	destroy_workqueue(ocelot->stats_queue);
- 	mutex_destroy(&ocelot->stats_lock);
-+	if (ocelot->ptp)
-+		ocelot_ace_rule_offload_del(&ptp_rule);
- 	ocelot_ace_deinit();
- 	if (ocelot->ptp_clock)
- 		ptp_clock_unregister(ocelot->ptp_clock);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0342-LF-376-enetc-disable-EEE-autoneg-by-default.patch b/target/linux/layerscape/patches-5.4/701-net-0342-LF-376-enetc-disable-EEE-autoneg-by-default.patch
deleted file mode 100644
index f968080ab8..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0342-LF-376-enetc-disable-EEE-autoneg-by-default.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From cb87015e005f429bff6fc084a61281235ca83d51 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Fri, 6 Dec 2019 12:41:48 +0800
-Subject: [PATCH] LF-376 enetc: disable EEE autoneg by default
-
-The EEE support has not been enabled on ENETC, but it may connect
-to a PHY which supports EEE and advertises EEE by default, while
-its link partner also advertises EEE. If this happens, the PHY enters
-low power mode when the traffic rate is low and causes packet loss.
-This patch disables EEE advertisement by default for any PHY that
-ENETC connects to, to prevent the above unwanted outcome.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/freescale/enetc/enetc.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
-@@ -1361,6 +1361,7 @@ static int enetc_phy_connect(struct net_
- {
- 	struct enetc_ndev_priv *priv = netdev_priv(ndev);
- 	struct phy_device *phydev;
-+	struct ethtool_eee edata;
- 
- 	if (!priv->phy_node)
- 		return 0; /* phy-less mode */
-@@ -1374,6 +1375,10 @@ static int enetc_phy_connect(struct net_
- 
- 	phy_attached_info(phydev);
- 
-+	/* disable EEE autoneg, until ENETC driver supports it */
-+	memset(&edata, 0, sizeof(struct ethtool_eee));
-+	phy_ethtool_set_eee(phydev, &edata);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0343-staging-dpaa2-ethsw-move-port-notifier-per-ethsw.patch b/target/linux/layerscape/patches-5.4/701-net-0343-staging-dpaa2-ethsw-move-port-notifier-per-ethsw.patch
deleted file mode 100644
index 5024e98221..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0343-staging-dpaa2-ethsw-move-port-notifier-per-ethsw.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From daaa4e77f9bc9e67fa3fd973d4455631d59fb898 Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Mon, 11 Nov 2019 18:50:55 +0200
-Subject: [PATCH] staging: dpaa2-ethsw: move port notifier per ethsw
-
-Register a different net_device notifier block per ethsw instance.
-When probing multiple dpaa2-ethsw instances, without this the register
-will fail.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Link: https://lore.kernel.org/r/1573491058-24766-2-git-send-email-ioana.ciornei@nxp.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/staging/fsl-dpaa2/ethsw/ethsw.c | 13 ++++++-------
- drivers/staging/fsl-dpaa2/ethsw/ethsw.h |  2 ++
- 2 files changed, 8 insertions(+), 7 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/ethsw/ethsw.c
-+++ b/drivers/staging/fsl-dpaa2/ethsw/ethsw.c
-@@ -1174,10 +1174,6 @@ static int port_netdevice_event(struct n
- 	return notifier_from_errno(err);
- }
- 
--static struct notifier_block port_nb __read_mostly = {
--	.notifier_call = port_netdevice_event,
--};
--
- struct ethsw_switchdev_event_work {
- 	struct work_struct work;
- 	struct switchdev_notifier_fdb_info fdb_info;
-@@ -1328,9 +1324,11 @@ static struct notifier_block port_switch
- 
- static int ethsw_register_notifier(struct device *dev)
- {
-+	struct ethsw_core *ethsw = dev_get_drvdata(dev);
- 	int err;
- 
--	err = register_netdevice_notifier(&port_nb);
-+	ethsw->port_nb.notifier_call = port_netdevice_event;
-+	err = register_netdevice_notifier(&ethsw->port_nb);
- 	if (err) {
- 		dev_err(dev, "Failed to register netdev notifier\n");
- 		return err;
-@@ -1353,7 +1351,7 @@ static int ethsw_register_notifier(struc
- err_switchdev_blocking_nb:
- 	unregister_switchdev_notifier(&port_switchdev_nb);
- err_switchdev_nb:
--	unregister_netdevice_notifier(&port_nb);
-+	unregister_netdevice_notifier(&ethsw->port_nb);
- 	return err;
- }
- 
-@@ -1491,6 +1489,7 @@ static int ethsw_port_init(struct ethsw_
- 
- static void ethsw_unregister_notifier(struct device *dev)
- {
-+	struct ethsw_core *ethsw = dev_get_drvdata(dev);
- 	struct notifier_block *nb;
- 	int err;
- 
-@@ -1505,7 +1504,7 @@ static void ethsw_unregister_notifier(st
- 		dev_err(dev,
- 			"Failed to unregister switchdev notifier (%d)\n", err);
- 
--	err = unregister_netdevice_notifier(&port_nb);
-+	err = unregister_netdevice_notifier(&ethsw->port_nb);
- 	if (err)
- 		dev_err(dev,
- 			"Failed to unregister netdev notifier (%d)\n", err);
---- a/drivers/staging/fsl-dpaa2/ethsw/ethsw.h
-+++ b/drivers/staging/fsl-dpaa2/ethsw/ethsw.h
-@@ -66,6 +66,8 @@ struct ethsw_core {
- 
- 	u8				vlans[VLAN_VID_MASK + 1];
- 	bool				learning;
-+
-+	struct notifier_block		port_nb;
- };
- 
- #endif	/* __ETHSW_H */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0344-staging-dpaa2-ethsw-move-port-switchdev-notifier-per.patch b/target/linux/layerscape/patches-5.4/701-net-0344-staging-dpaa2-ethsw-move-port-switchdev-notifier-per.patch
deleted file mode 100644
index 459d145afc..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0344-staging-dpaa2-ethsw-move-port-switchdev-notifier-per.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From e35e9d1a3dd2cc4f06f03ec4c3fae781bb0c5075 Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Mon, 11 Nov 2019 18:50:56 +0200
-Subject: [PATCH] staging: dpaa2-ethsw: move port switchdev notifier per ethsw
-
-Register a different switchdev notifier block per ethsw instance.
-When probing multiple dpaa2-ethsw instances, without this the register
-will fail.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Link: https://lore.kernel.org/r/1573491058-24766-3-git-send-email-ioana.ciornei@nxp.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/staging/fsl-dpaa2/ethsw/ethsw.c | 11 ++++-------
- drivers/staging/fsl-dpaa2/ethsw/ethsw.h |  1 +
- 2 files changed, 5 insertions(+), 7 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/ethsw/ethsw.c
-+++ b/drivers/staging/fsl-dpaa2/ethsw/ethsw.c
-@@ -1314,10 +1314,6 @@ static int port_switchdev_blocking_event
- 	return NOTIFY_DONE;
- }
- 
--static struct notifier_block port_switchdev_nb = {
--	.notifier_call = port_switchdev_event,
--};
--
- static struct notifier_block port_switchdev_blocking_nb = {
- 	.notifier_call = port_switchdev_blocking_event,
- };
-@@ -1334,7 +1330,8 @@ static int ethsw_register_notifier(struc
- 		return err;
- 	}
- 
--	err = register_switchdev_notifier(&port_switchdev_nb);
-+	ethsw->port_switchdev_nb.notifier_call = port_switchdev_event;
-+	err = register_switchdev_notifier(&ethsw->port_switchdev_nb);
- 	if (err) {
- 		dev_err(dev, "Failed to register switchdev notifier\n");
- 		goto err_switchdev_nb;
-@@ -1349,7 +1346,7 @@ static int ethsw_register_notifier(struc
- 	return 0;
- 
- err_switchdev_blocking_nb:
--	unregister_switchdev_notifier(&port_switchdev_nb);
-+	unregister_switchdev_notifier(&ethsw->port_switchdev_nb);
- err_switchdev_nb:
- 	unregister_netdevice_notifier(&ethsw->port_nb);
- 	return err;
-@@ -1499,7 +1496,7 @@ static void ethsw_unregister_notifier(st
- 		dev_err(dev,
- 			"Failed to unregister switchdev blocking notifier (%d)\n", err);
- 
--	err = unregister_switchdev_notifier(&port_switchdev_nb);
-+	err = unregister_switchdev_notifier(&ethsw->port_switchdev_nb);
- 	if (err)
- 		dev_err(dev,
- 			"Failed to unregister switchdev notifier (%d)\n", err);
---- a/drivers/staging/fsl-dpaa2/ethsw/ethsw.h
-+++ b/drivers/staging/fsl-dpaa2/ethsw/ethsw.h
-@@ -68,6 +68,7 @@ struct ethsw_core {
- 	bool				learning;
- 
- 	struct notifier_block		port_nb;
-+	struct notifier_block		port_switchdev_nb;
- };
- 
- #endif	/* __ETHSW_H */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0345-staging-dpaa2-ethsw-move-port-switchdev-blocking-not.patch b/target/linux/layerscape/patches-5.4/701-net-0345-staging-dpaa2-ethsw-move-port-switchdev-blocking-not.patch
deleted file mode 100644
index ace7012f42..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0345-staging-dpaa2-ethsw-move-port-switchdev-blocking-not.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From e6987a7f7ebbde64eb679f10a6eb857b9e28d05d Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Mon, 11 Nov 2019 18:50:57 +0200
-Subject: [PATCH] staging: dpaa2-ethsw: move port switchdev blocking notifier
- per ethsw
-
-Register a different switchdev blocking notifier block per ethsw
-instance.  When probing multiple dpaa2-ethsw instances, without this the
-register will fail.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Link: https://lore.kernel.org/r/1573491058-24766-4-git-send-email-ioana.ciornei@nxp.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/staging/fsl-dpaa2/ethsw/ethsw.c | 9 +++------
- drivers/staging/fsl-dpaa2/ethsw/ethsw.h | 1 +
- 2 files changed, 4 insertions(+), 6 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/ethsw/ethsw.c
-+++ b/drivers/staging/fsl-dpaa2/ethsw/ethsw.c
-@@ -1314,10 +1314,6 @@ static int port_switchdev_blocking_event
- 	return NOTIFY_DONE;
- }
- 
--static struct notifier_block port_switchdev_blocking_nb = {
--	.notifier_call = port_switchdev_blocking_event,
--};
--
- static int ethsw_register_notifier(struct device *dev)
- {
- 	struct ethsw_core *ethsw = dev_get_drvdata(dev);
-@@ -1337,7 +1333,8 @@ static int ethsw_register_notifier(struc
- 		goto err_switchdev_nb;
- 	}
- 
--	err = register_switchdev_blocking_notifier(&port_switchdev_blocking_nb);
-+	ethsw->port_switchdevb_nb.notifier_call = port_switchdev_blocking_event;
-+	err = register_switchdev_blocking_notifier(&ethsw->port_switchdevb_nb);
- 	if (err) {
- 		dev_err(dev, "Failed to register switchdev blocking notifier\n");
- 		goto err_switchdev_blocking_nb;
-@@ -1490,7 +1487,7 @@ static void ethsw_unregister_notifier(st
- 	struct notifier_block *nb;
- 	int err;
- 
--	nb = &port_switchdev_blocking_nb;
-+	nb = &ethsw->port_switchdevb_nb;
- 	err = unregister_switchdev_blocking_notifier(nb);
- 	if (err)
- 		dev_err(dev,
---- a/drivers/staging/fsl-dpaa2/ethsw/ethsw.h
-+++ b/drivers/staging/fsl-dpaa2/ethsw/ethsw.h
-@@ -69,6 +69,7 @@ struct ethsw_core {
- 
- 	struct notifier_block		port_nb;
- 	struct notifier_block		port_switchdev_nb;
-+	struct notifier_block		port_switchdevb_nb;
- };
- 
- #endif	/* __ETHSW_H */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0346-staging-dpaa2-ethsw-ordered-workqueue-should-be-per-.patch b/target/linux/layerscape/patches-5.4/701-net-0346-staging-dpaa2-ethsw-ordered-workqueue-should-be-per-.patch
deleted file mode 100644
index e8ef62951b..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0346-staging-dpaa2-ethsw-ordered-workqueue-should-be-per-.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 6e0b1cafcfc1bf343cf4957a93850178ba9ea165 Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Mon, 11 Nov 2019 18:50:58 +0200
-Subject: [PATCH] staging: dpaa2-ethsw: ordered workqueue should be per ethsw
-
-Create a different ordered workqueue per dpaa2-ethsw instance.  Without
-this change, we overwrite the global queue and leak memory when probing
-multiple instances of the driver.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Link: https://lore.kernel.org/r/1573491058-24766-5-git-send-email-ioana.ciornei@nxp.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/staging/fsl-dpaa2/ethsw/ethsw.c | 17 +++++++++--------
- drivers/staging/fsl-dpaa2/ethsw/ethsw.h |  1 +
- 2 files changed, 10 insertions(+), 8 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/ethsw/ethsw.c
-+++ b/drivers/staging/fsl-dpaa2/ethsw/ethsw.c
-@@ -18,8 +18,6 @@
- 
- #include "ethsw.h"
- 
--static struct workqueue_struct *ethsw_owq;
--
- /* Minimal supported DPSW version */
- #define DPSW_MIN_VER_MAJOR		8
- #define DPSW_MIN_VER_MINOR		1
-@@ -1229,8 +1227,10 @@ static int port_switchdev_event(struct n
- 				unsigned long event, void *ptr)
- {
- 	struct net_device *dev = switchdev_notifier_info_to_dev(ptr);
-+	struct ethsw_port_priv *port_priv = netdev_priv(dev);
- 	struct ethsw_switchdev_event_work *switchdev_work;
- 	struct switchdev_notifier_fdb_info *fdb_info = ptr;
-+	struct ethsw_core *ethsw = port_priv->ethsw_data;
- 
- 	if (!ethsw_port_dev_check(dev))
- 		return NOTIFY_DONE;
-@@ -1266,7 +1266,7 @@ static int port_switchdev_event(struct n
- 		return NOTIFY_DONE;
- 	}
- 
--	queue_work(ethsw_owq, &switchdev_work->work);
-+	queue_work(ethsw->workqueue, &switchdev_work->work);
- 
- 	return NOTIFY_DONE;
- 
-@@ -1427,9 +1427,10 @@ static int ethsw_init(struct fsl_mc_devi
- 		}
- 	}
- 
--	ethsw_owq = alloc_ordered_workqueue("%s_ordered", WQ_MEM_RECLAIM,
--					    "ethsw");
--	if (!ethsw_owq) {
-+	ethsw->workqueue = alloc_ordered_workqueue("%s_%d_ordered",
-+						   WQ_MEM_RECLAIM, "ethsw",
-+						   ethsw->sw_attr.id);
-+	if (!ethsw->workqueue) {
- 		err = -ENOMEM;
- 		goto err_close;
- 	}
-@@ -1441,7 +1442,7 @@ static int ethsw_init(struct fsl_mc_devi
- 	return 0;
- 
- err_destroy_ordered_workqueue:
--	destroy_workqueue(ethsw_owq);
-+	destroy_workqueue(ethsw->workqueue);
- 
- err_close:
- 	dpsw_close(ethsw->mc_io, 0, ethsw->dpsw_handle);
-@@ -1529,7 +1530,7 @@ static int ethsw_remove(struct fsl_mc_de
- 
- 	ethsw_teardown_irqs(sw_dev);
- 
--	destroy_workqueue(ethsw_owq);
-+	destroy_workqueue(ethsw->workqueue);
- 
- 	dpsw_disable(ethsw->mc_io, 0, ethsw->dpsw_handle);
- 
---- a/drivers/staging/fsl-dpaa2/ethsw/ethsw.h
-+++ b/drivers/staging/fsl-dpaa2/ethsw/ethsw.h
-@@ -70,6 +70,7 @@ struct ethsw_core {
- 	struct notifier_block		port_nb;
- 	struct notifier_block		port_switchdev_nb;
- 	struct notifier_block		port_switchdevb_nb;
-+	struct workqueue_struct		*workqueue;
- };
- 
- #endif	/* __ETHSW_H */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0347-staging-fsl-dpaa2-mac-do-not-call-dpmac_set_link_sta.patch b/target/linux/layerscape/patches-5.4/701-net-0347-staging-fsl-dpaa2-mac-do-not-call-dpmac_set_link_sta.patch
deleted file mode 100644
index 69202375ee..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0347-staging-fsl-dpaa2-mac-do-not-call-dpmac_set_link_sta.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 978b13baa79b68f3471cc2c5110a2e45aab9ca61 Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Tue, 10 Dec 2019 17:26:06 +0200
-Subject: [PATCH] staging: fsl-dpaa2/mac: do not call dpmac_set_link_state()
- when nothing changed
-
-In case nothing changed in the link configuration do not call
-dpmac_set_link_state().
-This is needed in case of the following sequence of commands.
-
-$ ip link set dev eth1 up; ip link set dev eth2 down
-
-Phylib brings the link down when the aneg is started on the phy which
-translates in a link down from phy in MC and confuses the MC linkman.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 16 ++++++++++------
- 1 file changed, 10 insertions(+), 6 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -158,12 +158,16 @@ static void dpaa2_mac_link_changed(struc
- 		netif_carrier_off(netdev);
- 	}
- 
--	if (priv->old_state.up != state.up ||
--	    priv->old_state.rate != state.rate ||
--	    priv->old_state.options != state.options) {
--		priv->old_state = state;
--		phy_print_status(phydev);
--	}
-+	/* Call the dpmac_set_link_state() only if there is a change in the
-+	 * link configuration
-+	 */
-+	if (priv->old_state.up == state.up &&
-+	    priv->old_state.rate == state.rate &&
-+	    priv->old_state.options == state.options)
-+		return;
-+
-+	priv->old_state = state;
-+	phy_print_status(phydev);
- 
- 	if (cmp_dpmac_ver(priv, DPMAC_LINK_AUTONEG_VER_MAJOR,
- 			  DPMAC_LINK_AUTONEG_VER_MINOR) < 0) {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0348-staging-fsl-dpaa2-mac-reverse-order-of-handling-stop.patch b/target/linux/layerscape/patches-5.4/701-net-0348-staging-fsl-dpaa2-mac-reverse-order-of-handling-stop.patch
deleted file mode 100644
index 6788b8425b..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0348-staging-fsl-dpaa2-mac-reverse-order-of-handling-stop.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From c9db7ecdd08e38fb1af207c2a7e810b4bd0d1043 Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Wed, 11 Dec 2019 17:06:40 +0200
-Subject: [PATCH] staging: fsl-dpaa2/mac: reverse order of handling stop/start
- IRQs
-
-Both the LINK_UP_REQ and the LINK_DOWN_REQ IRQs can be received in the
-same time when a reset is performed on the DPMAC's partner.
-Handle first the link down and then the link up so that we do not
-trigger a phylib WARNING like the following:
-
-[  446.272011] called from state NOLINK
-[  446.275604] WARNING: CPU: 0 PID: 473 at drivers/net/phy/phy.c:874
-phy_start+0x44/0xa8
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -482,12 +482,11 @@ static irqreturn_t dpaa2_mac_irq_handler
- 		configure_link(priv, &link_cfg);
- 	}
- 
--	if (status & DPMAC_IRQ_EVENT_LINK_UP_REQ)
--		phy_start(ndev->phydev);
--
- 	if (status & DPMAC_IRQ_EVENT_LINK_DOWN_REQ)
- 		phy_stop(ndev->phydev);
- 
-+	if (status & DPMAC_IRQ_EVENT_LINK_UP_REQ)
-+		phy_start(ndev->phydev);
- out:
- 	dpmac_clear_irq_status(mc_dev->mc_io, 0, mc_dev->mc_handle,
- 			       DPMAC_IRQ_INDEX, status);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0349-fsl_qbman-add-dummy-functions-for-probe-deferal-APIs.patch b/target/linux/layerscape/patches-5.4/701-net-0349-fsl_qbman-add-dummy-functions-for-probe-deferal-APIs.patch
deleted file mode 100644
index 7192ae79aa..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0349-fsl_qbman-add-dummy-functions-for-probe-deferal-APIs.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From d7050fa7b0b0e88217ebfc09666eb08632dfe436 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 12 Mar 2019 17:57:26 +0200
-Subject: [PATCH] fsl_qbman: add dummy functions for probe deferal APIs
-
-Add missing definitions for probe deferal APIs for drivers
-that use them with the SDK version of the qbman drivers.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Signed-off-by: Vlad Pelin <vlad.pelin@nxp.com>
-Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- include/linux/fsl_qman.h | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/include/linux/fsl_qman.h
-+++ b/include/linux/fsl_qman.h
-@@ -3893,6 +3893,16 @@ int qman_p_enqueue_orp(struct qman_porta
- int qman_p_enqueue_precommit(struct qman_portal *p, struct qman_fq *fq,
- 				const struct qm_fd *fd, u32 flags,
- 				qman_cb_precommit cb, void *cb_arg);
-+
-+static inline int qman_is_probed(void) {
-+	return 1;
-+}
-+
-+
-+static inline int qman_portals_probed(void) {
-+	return 1;
-+}
-+
- #ifdef __cplusplus
- }
- #endif
diff --git a/target/linux/layerscape/patches-5.4/701-net-0350-sdk_fman-fix-identation-causing-compilation-warnings.patch b/target/linux/layerscape/patches-5.4/701-net-0350-sdk_fman-fix-identation-causing-compilation-warnings.patch
deleted file mode 100644
index 64eb72d3a5..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0350-sdk_fman-fix-identation-causing-compilation-warnings.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 2152a79d81c23f21bedd9ea5934c6df266642f36 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@oss.nxp.com>
-Date: Thu, 19 Dec 2019 14:33:11 +0200
-Subject: [PATCH] sdk_fman: fix identation causing compilation warnings
-
-Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
----
- drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fman.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fman.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fman.c
-@@ -460,8 +460,8 @@ uint8_t fman_get_num_of_tasks(struct fma
- {
- 	uint32_t tmp;
- 
--    if ((port_id > 63) || (port_id < 1))
--        return 0;
-+	if ((port_id > 63) || (port_id < 1))
-+		return 0;
- 
- 	tmp = ioread32be(&bmi_rg->fmbm_pp[port_id - 1]);
- 	return (uint8_t)(((tmp & BMI_NUM_OF_TASKS_MASK) >>
-@@ -472,8 +472,8 @@ uint8_t fman_get_num_extra_tasks(struct
- {
- 	uint32_t tmp;
- 
--    if ((port_id > 63) || (port_id < 1))
--        return 0;
-+	if ((port_id > 63) || (port_id < 1))
-+		return 0;
- 
- 	tmp = ioread32be(&bmi_rg->fmbm_pp[port_id - 1]);
- 	return (uint8_t)((tmp & BMI_NUM_OF_EXTRA_TASKS_MASK) >>
diff --git a/target/linux/layerscape/patches-5.4/701-net-0351-sdk_fman-address-compilation-warning.patch b/target/linux/layerscape/patches-5.4/701-net-0351-sdk_fman-address-compilation-warning.patch
deleted file mode 100644
index efcaccc41f..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0351-sdk_fman-address-compilation-warning.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From dd20e6f1e67e50bfa557b3b4597dd76dc1589644 Mon Sep 17 00:00:00 2001
-From: Madalin Bucur <madalin.bucur@oss.nxp.com>
-Date: Thu, 19 Dec 2019 14:41:09 +0200
-Subject: [PATCH] sdk_fman: address compilation warning
-
-Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
----
- drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/HC/hc.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/HC/hc.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/HC/hc.c
-@@ -642,6 +642,8 @@ t_Error FmHcPcdKgSetClsPlan(t_Handle h_F
-     t_DpaaFD                fmFd;
-     uint8_t                 i, idx;
-     uint32_t                seqNum;
-+    const void *src;
-+    void *dest;
-     t_Error                 err = E_OK;
- 
-     ASSERT_COND(p_FmHc);
-@@ -659,7 +661,9 @@ t_Error FmHcPcdKgSetClsPlan(t_Handle h_F
- 
-         idx = (uint8_t)(i - p_Set->baseEntry);
-         ASSERT_COND(idx < FM_PCD_MAX_NUM_OF_CLS_PLANS);
--        memcpy(&p_HcFrame->hcSpecificData.clsPlanEntries, &p_Set->vectors[idx], CLS_PLAN_NUM_PER_GRP*sizeof(uint32_t));
-+	dest = (void *)&p_HcFrame->hcSpecificData.clsPlanEntries; 
-+	src = &p_Set->vectors[idx];
-+        memcpy(dest, src, CLS_PLAN_NUM_PER_GRP*sizeof(uint32_t));
-         p_HcFrame->commandSequence = seqNum;
- 
-         BUILD_FD(sizeof(t_HcFrame));
diff --git a/target/linux/layerscape/patches-5.4/701-net-0352-soc-fsl-dpio-Enable-ACP-port-in-Linux-QMAN-driver.patch b/target/linux/layerscape/patches-5.4/701-net-0352-soc-fsl-dpio-Enable-ACP-port-in-Linux-QMAN-driver.patch
deleted file mode 100644
index ed1978b564..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0352-soc-fsl-dpio-Enable-ACP-port-in-Linux-QMAN-driver.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 462a65a13cff2e04122df6a770d91ef1e301b359 Mon Sep 17 00:00:00 2001
-From: Youri Querry <youri.querry_1@nxp.com>
-Date: Thu, 19 Dec 2019 09:44:33 -0500
-Subject: [PATCH] soc: fsl: dpio: Enable ACP port in Linux QMAN driver
-
-Setting the software portal configuration DE(dequeue stashing
-enable) bit. This should enable the ACP (Accelerator Coherency
-Port).
-
-During test this improved performance on the LS2088a slightly. No
-effect on the LX2160a.
-
-Signed-off-by: Youri Querry <youri.querry_1@nxp.com>
----
- drivers/soc/fsl/dpio/qbman-portal.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/soc/fsl/dpio/qbman-portal.c
-+++ b/drivers/soc/fsl/dpio/qbman-portal.c
-@@ -299,7 +299,7 @@ struct qbman_swp *qbman_swp_init(const s
- 			1, /* mem stashing priority enable */
- 			1, /* mem stashing enable */
- 			1, /* dequeue stashing priority enable */
--			0, /* dequeue stashing enable enable */
-+			1, /* dequeue stashing enable enable */
- 			0); /* EQCR_CI stashing priority enable */
- 	} else {
- 		memset(p->addr_cena, 0, 64 * 1024);
-@@ -313,7 +313,7 @@ struct qbman_swp *qbman_swp_init(const s
- 			1, /* mem stashing priority enable */
- 			1, /* mem stashing enable */
- 			1, /* dequeue stashing priority enable */
--			0, /* dequeue stashing enable */
-+			1, /* dequeue stashing enable */
- 			0); /* EQCR_CI stashing priority enable */
- 		reg |= 1 << SWP_CFG_CPBS_SHIFT | /* memory-backed mode */
- 		       1 << SWP_CFG_VPM_SHIFT |  /* VDQCR read triggered mode */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0353-staging-fsl-dpaa2-mac-do-not-stop-MAC-when-the-net_d.patch b/target/linux/layerscape/patches-5.4/701-net-0353-staging-fsl-dpaa2-mac-do-not-stop-MAC-when-the-net_d.patch
deleted file mode 100644
index 80bb697edf..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0353-staging-fsl-dpaa2-mac-do-not-stop-MAC-when-the-net_d.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From aae18d4ce3055e459855cc8661cf8f2a5e2cbe73 Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Fri, 13 Dec 2019 13:24:01 +0200
-Subject: [PATCH] staging: fsl-dpaa2/mac: do not stop MAC when the net_dev is
- not up
-
-In case the net_device is not up, there is no need to call
-dpmac_mac_stop(). Guard the call by checking the IFF_UP flag.
-This patch will also solve the following warning generated by removing a
-dpmac that is not up.
-
-[   40.942937] called from state READY
-[   40.946442] WARNING: CPU: 0 PID: 755 at drivers/net/phy/phy.c:838
-phy_stop+0x6c/0x78
-[   40.954171] Modules linked in:
-[   40.957214] CPU: 0 PID: 755 Comm: bash Tainted: G        W
-5.4.0-03629-gfd7102c32b2c-dirty #911
-[   40.966592] Hardware name: NXP Layerscape LX2160ARDB (DT)
-[   40.971978] pstate: 40000005 (nZcv daif -PAN -UAO)
-[   40.976756] pc : phy_stop+0x6c/0x78
-[   40.980232] lr : phy_stop+0x6c/0x78
-(..)
-[   41.066487] Call trace:
-[   41.068922]  phy_stop+0x6c/0x78
-[   41.072052]  dpaa2_mac_stop.part.4+0x34/0x5c
-[   41.076309]  dpaa2_mac_remove+0x9c/0xa8
-
-Also, remove the IFF_UP flag from the mac netdev since the PHY is not
-anymore started at probe time but is rather started/stopped on ifconfig
-up/down.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
----
- drivers/staging/fsl-dpaa2/mac/mac.c | 8 +++-----
- 1 file changed, 3 insertions(+), 5 deletions(-)
-
---- a/drivers/staging/fsl-dpaa2/mac/mac.c
-+++ b/drivers/staging/fsl-dpaa2/mac/mac.c
-@@ -1,5 +1,5 @@
- /* Copyright 2015 Freescale Semiconductor Inc.
-- * Copyright 2018 NXP
-+ * Copyright 2018-2019 NXP
-  *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted provided that the following conditions are met:
-@@ -664,9 +664,6 @@ static int dpaa2_mac_probe(struct fsl_mc
- 	netdev->netdev_ops = &dpaa2_mac_ndo_ops;
- 	netdev->ethtool_ops = &dpaa2_mac_ethtool_ops;
- 
--	/* phy starts up enabled so netdev should be up too */
--	netdev->flags |= IFF_UP;
--
- 	err = register_netdev(priv->netdev);
- 	if (err < 0) {
- 		dev_err(dev, "register_netdev error %d\n", err);
-@@ -775,7 +772,8 @@ static int dpaa2_mac_remove(struct fsl_m
- 	struct dpaa2_mac_priv	*priv = dev_get_drvdata(dev);
- 	struct net_device	*netdev = priv->netdev;
- 
--	dpaa2_mac_stop(netdev);
-+	if (netdev->flags & IFF_UP)
-+		dpaa2_mac_stop(netdev);
- 
- 	if (phy_is_pseudo_fixed_link(netdev->phydev))
- 		fixed_phy_unregister(netdev->phydev);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0354-bus-fsl-mc-add-the-dpdbg-device-type.patch b/target/linux/layerscape/patches-5.4/701-net-0354-bus-fsl-mc-add-the-dpdbg-device-type.patch
deleted file mode 100644
index 6a20704a6c..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0354-bus-fsl-mc-add-the-dpdbg-device-type.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 6f506965930f06a3c82ba46c5f095e7b1b6368af Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Fri, 20 Dec 2019 14:35:52 +0200
-Subject: [PATCH] bus: fsl-mc: add the dpdbg device type
-
-A new object type was recently added in MC.  This has to be added in the
-fsl-mc bus device type list so that it can be properly listed.
-
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Reviewed-by: Madalin Bucur <madalin.bucur@nxp.com>
----
- drivers/bus/fsl-mc/fsl-mc-bus.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/bus/fsl-mc/fsl-mc-bus.c
-+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
-@@ -369,6 +369,10 @@ struct device_type fsl_mc_bus_dpdmai_typ
- 	.name = "fsl_mc_bus_dpdmai"
- };
- 
-+struct device_type fsl_mc_bus_dpdbg_type = {
-+	.name = "fsl_mc_bus_dpdbg"
-+};
-+
- static struct device_type *fsl_mc_get_device_type(const char *type)
- {
- 	static const struct {
-@@ -390,6 +394,7 @@ static struct device_type *fsl_mc_get_de
- 		{ &fsl_mc_bus_dpaiop_type, "dpaiop" },
- 		{ &fsl_mc_bus_dpci_type, "dpci" },
- 		{ &fsl_mc_bus_dpdmai_type, "dpdmai" },
-+		{ &fsl_mc_bus_dpdbg_type, "dpdbg" },
- 		{ NULL, NULL }
- 	};
- 	int i;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0355-sdk_fman-decrease-log-severity-levels.patch b/target/linux/layerscape/patches-5.4/701-net-0355-sdk_fman-decrease-log-severity-levels.patch
deleted file mode 100644
index 5bb3d7b8fa..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0355-sdk_fman-decrease-log-severity-levels.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 1cbcd6a80eb6bbea5747a5a8edc450d8fc48e976 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Thu, 19 Dec 2019 11:38:33 +0200
-Subject: [PATCH] sdk_fman: decrease log severity levels
-
-Decrease the severity of log messages from critical to appropriate
-levels (warning and info).
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c      | 2 +-
- drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm_port.c | 4 ++--
- 2 files changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-@@ -2896,7 +2896,7 @@ static int __init __cold fm_load (void)
-         return -ENODEV;
-     }
- 
--	printk(KERN_CRIT "Freescale FM module," \
-+	printk(KERN_INFO "Freescale FM module," \
- 		" FMD API version %d.%d.%d\n",
- 		FMD_API_VERSION_MAJOR,
- 		FMD_API_VERSION_MINOR,
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm_port.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm_port.c
-@@ -1494,11 +1494,11 @@ void LNXWRP_FM_Port_Free(void)
- static int __init __cold fm_port_load(void)
- {
- 	if (LNXWRP_FM_Port_Init() != E_OK) {
--		printk(KERN_CRIT "Failed to init FM Ports wrapper!\n");
-+		printk(KERN_ERR "Failed to init FM Ports wrapper!\n");
- 		return -ENODEV;
- 	}
- 
--	printk(KERN_CRIT "Freescale FM Ports module\n");
-+	printk(KERN_INFO "Freescale FM Ports module\n");
- 
- 	return 0;
- }
diff --git a/target/linux/layerscape/patches-5.4/701-net-0356-sdk_dpaa-ethtool-drop-unused-variable.patch b/target/linux/layerscape/patches-5.4/701-net-0356-sdk_dpaa-ethtool-drop-unused-variable.patch
deleted file mode 100644
index 7d59d550fb..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0356-sdk_dpaa-ethtool-drop-unused-variable.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 77d8734e1870f842d1e62addec82e5c05c1a6630 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 29 Oct 2019 16:07:57 +0200
-Subject: [PATCH] sdk_dpaa: ethtool: drop unused variable
-
-Remove unused variable that was missed in past code refactorings.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c
-@@ -90,7 +90,6 @@ static char dpa_stats_global[][ETH_GSTRI
- static int __cold dpa_get_ksettings(struct net_device *net_dev,
- 		struct ethtool_link_ksettings *cmd)
- {
--	int			 _errno;
- 	struct dpa_priv_s	*priv;
- 
- 	priv = netdev_priv(net_dev);
-@@ -106,7 +105,7 @@ static int __cold dpa_get_ksettings(stru
- 
- 	phy_ethtool_ksettings_get(priv->mac_dev->phy_dev, cmd);
- 
--	return _errno;
-+	return 0;
- }
- 
- static int __cold dpa_set_ksettings(struct net_device *net_dev,
diff --git a/target/linux/layerscape/patches-5.4/701-net-0357-sdk_dpaa-ls1043a-errata-memory-related-fixes.patch b/target/linux/layerscape/patches-5.4/701-net-0357-sdk_dpaa-ls1043a-errata-memory-related-fixes.patch
deleted file mode 100644
index 6daee462bc..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0357-sdk_dpaa-ls1043a-errata-memory-related-fixes.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From 26d3cc476c26832e1e05db182ac27906f6c81f2d Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 29 Oct 2019 16:12:18 +0200
-Subject: [PATCH] sdk_dpaa: ls1043a errata: memory related fixes
-
-Avoid a crash by verifying the allocation return status.
-
-Use the standard API for determining the page order needed for
-allocating Jumbo sized skbs.
-
-Explicitly remove the old skb outside the w/a, for both successful and
-unsuccessful realignments. Make sure the old skb's memory isn't leaked.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c  | 30 ++++++++++++++--------
- 1 file changed, 19 insertions(+), 11 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -809,8 +809,8 @@ static struct sk_buff *a010022_realign_s
- {
- 	int trans_offset = skb_transport_offset(skb);
- 	int net_offset = skb_network_offset(skb);
--	int nsize, headroom, npage_order;
- 	struct sk_buff *nskb = NULL;
-+	int nsize, headroom;
- 	struct page *npage;
- 	void *npage_addr;
- 
-@@ -825,8 +825,7 @@ static struct sk_buff *a010022_realign_s
- 		SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
- 
- 	/* Reserve enough memory to accommodate Jumbo frames */
--	npage_order = (nsize - 1) / PAGE_SIZE;
--	npage = alloc_pages(GFP_ATOMIC | __GFP_COMP, npage_order);
-+	npage = alloc_pages(GFP_ATOMIC | __GFP_COMP, get_order(nsize));
- 	if (unlikely(!npage)) {
- 		WARN_ONCE(1, "Memory allocation failure\n");
- 		return NULL;
-@@ -869,7 +868,6 @@ static struct sk_buff *a010022_realign_s
- 	/* We don't want the buffer to be recycled so we mark it accordingly */
- 	nskb->mark = NONREC_MARK;
- 
--	dev_kfree_skb(skb);
- 	return nskb;
- 
- err:
-@@ -911,8 +909,13 @@ int __hot skb_to_sg_fd(struct dpa_priv_s
- 	 * is in place and we need to avoid crossing a 4k boundary.
- 	 */
- #ifndef CONFIG_PPC
--	if (unlikely(dpaa_errata_a010022))
--		sgt_buf = page_address(alloc_page(GFP_ATOMIC));
-+	if (unlikely(dpaa_errata_a010022)) {
-+		struct page *new_page = alloc_page(GFP_ATOMIC);
-+
-+		if (unlikely(!new_page))
-+			return -ENOMEM;
-+		sgt_buf = page_address(new_page);
-+	}
- 	else
- #endif
- 		sgt_buf = netdev_alloc_frag(priv->tx_headroom + sgt_size);
-@@ -1061,6 +1064,7 @@ int __hot dpa_tx_extended(struct sk_buff
- 	int err = 0;
- 	bool nonlinear;
- 	int *countptr, offset = 0;
-+	struct sk_buff *nskb;
- 
- 	priv = netdev_priv(net_dev);
- 	/* Non-migratable context, safe to use raw_cpu_ptr */
-@@ -1072,9 +1076,11 @@ int __hot dpa_tx_extended(struct sk_buff
- 
- #ifndef CONFIG_PPC
- 	if (unlikely(dpaa_errata_a010022) && a010022_check_skb(skb, priv)) {
--		skb = a010022_realign_skb(skb, priv);
--		if (!skb)
-+		nskb = a010022_realign_skb(skb, priv);
-+		if (!nskb)
- 			goto skb_to_fd_failed;
-+		dev_kfree_skb(skb);
-+		skb = nskb;
- 	}
- #endif
- 
-@@ -1130,15 +1136,17 @@ int __hot dpa_tx_extended(struct sk_buff
- 
- 		/* Code borrowed from skb_unshare(). */
- 		if (skb_cloned(skb)) {
--			struct sk_buff *nskb = skb_copy(skb, GFP_ATOMIC);
-+			nskb = skb_copy(skb, GFP_ATOMIC);
- 			kfree_skb(skb);
- 			skb = nskb;
- #ifndef CONFIG_PPC
- 			if (unlikely(dpaa_errata_a010022) &&
- 			    a010022_check_skb(skb, priv)) {
--				skb = a010022_realign_skb(skb, priv);
--				if (!skb)
-+				nskb = a010022_realign_skb(skb, priv);
-+				if (!nskb)
- 					goto skb_to_fd_failed;
-+				dev_kfree_skb(skb);
-+				skb = nskb;
- 			}
- #endif
- 			/* skb_copy() has now linearized the skbuff. */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0358-sdk_dpaa-ls1043a-errata-update-and-optimize-the-rest.patch b/target/linux/layerscape/patches-5.4/701-net-0358-sdk_dpaa-ls1043a-errata-update-and-optimize-the-rest.patch
deleted file mode 100644
index 684d04b256..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0358-sdk_dpaa-ls1043a-errata-update-and-optimize-the-rest.patch
+++ /dev/null
@@ -1,252 +0,0 @@
-From e89db675171a7a12f19b6ec0089a9cc62807cdf1 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 29 Oct 2019 16:34:08 +0200
-Subject: [PATCH] sdk_dpaa: ls1043a errata: update and optimize the
- restrictions
-
-An skb is in no danger of triggering the errata under the following
-conditions:
-- the paged data doesn't cross a 4K page boundary OR the linear data
-is aligned to 256 bytes when crossing a 4K page boundary
-- the linear and the paged data are 16 byte aligned
-- the paged data is a multiple of 16 bytes in size
-
-Optimize the detection for each skb that might trigger the errata. Parse
-the skb twice, at most, and realign it only once.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h |   2 +-
- .../net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c  | 147 +++++++++++++++------
- 2 files changed, 111 insertions(+), 38 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-@@ -662,7 +662,7 @@ static inline void _dpa_bp_free_pf(void
- #ifndef CONFIG_PPC
- extern bool dpaa_errata_a010022; /* SoC affected by A010022 errata */
- #define NONREC_MARK	0x01
--#define HAS_DMA_ISSUE(start, size) \
-+#define CROSS_4K(start, size) \
- 	(((uintptr_t)(start) + (size)) > \
- 	 (((uintptr_t)(start) + 0x1000) & ~0xFFF))
- /* The headroom needs to accommodate our private data (64 bytes) but
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -771,32 +771,73 @@ int __hot skb_to_contig_fd(struct dpa_pr
- EXPORT_SYMBOL(skb_to_contig_fd);
- 
- #ifndef CONFIG_PPC
--/* Verify the conditions that trigger the A010022 errata: data unaligned to
-- * 16 bytes, 4K memory address crossings and S/G fragments.
-+/* Verify the conditions that trigger the A010022 errata:
-+ * - 4K memory address boundary crossings when the data/SG fragments aren't
-+ *   aligned to 256 bytes
-+ * - data and SG fragments that aren't aligned to 16 bytes
-+ * - SG fragments that aren't mod 16 bytes in size (except for the last
-+ *   fragment)
-  */
- static bool a010022_check_skb(struct sk_buff *skb, struct dpa_priv_s *priv)
- {
--	/* Check if the headroom is aligned */
--	if (((uintptr_t)skb->data - priv->tx_headroom) %
--	    priv->buf_layout[TX].data_align != 0)
--		return true;
-+	skb_frag_t *frag;
-+	int i, nr_frags;
- 
--	/* Check for paged data in the skb. We do not support S/G fragments */
--	if (skb_is_nonlinear(skb))
-+	nr_frags = skb_shinfo(skb)->nr_frags;
-+
-+	/* Check if the linear data is 16 byte aligned */
-+	if ((uintptr_t)skb->data % 16)
- 		return true;
- 
--	/* Check if the headroom crosses a boundary */
--	if (HAS_DMA_ISSUE(skb->head, skb_headroom(skb)))
-+	/* Check if the needed headroom crosses a 4K address boundary without
-+	 * being 256 byte aligned
-+	 */
-+	if (CROSS_4K(skb->data - priv->tx_headroom, priv->tx_headroom) &&
-+	    (((uintptr_t)skb->data - priv->tx_headroom) % 256))
- 		return true;
- 
--	/* Check if the non-paged data crosses a boundary */
--	if (HAS_DMA_ISSUE(skb->data, skb_headlen(skb)))
-+	/* Check if the linear data crosses a 4K address boundary without
-+	 * being 256 byte aligned
-+	 */
-+	if (CROSS_4K(skb->data, skb_headlen(skb)) &&
-+	    ((uintptr_t)skb->data % 256))
- 		return true;
- 
--	/* Check if the entire linear skb crosses a boundary */
--	if (HAS_DMA_ISSUE(skb->head, skb_end_offset(skb)))
-+	/* When using Scatter/Gather, the linear data becomes the first
-+	 * fragment in the list and must follow the same restrictions as the
-+	 * other fragments.
-+	 *
-+	 * Check if the linear data is mod 16 bytes in size.
-+	 */
-+	if (nr_frags && (skb_headlen(skb) % 16))
- 		return true;
- 
-+	/* Check the SG fragments. They must follow the same rules as the
-+	 * linear data with and additional restriction: they must be multiple
-+	 * of 16 bytes in size to account for the hardware carryover effect.
-+	 */
-+	for (i = 0; i < nr_frags; i++) {
-+		frag = &skb_shinfo(skb)->frags[i];
-+
-+		/* Check if the fragment is a multiple of 16 bytes in size.
-+		 * The last fragment is exempt from this restriction.
-+		 */
-+		if ((i != (nr_frags - 1)) && (skb_frag_size(frag) % 16))
-+			return true;
-+
-+		/* Check if the fragment is 16 byte aligned */
-+		if (skb_frag_off(frag) % 16)
-+			return true;
-+
-+		/* Check if the fragment crosses a 4K address boundary. Since
-+		 * the alignment of previous fragments can influence the
-+		 * current fragment, checking for the 256 byte alignment
-+		 * isn't relevant.
-+		 */
-+		if (CROSS_4K(skb_frag_off(frag), skb_frag_size(frag)))
-+			return true;
-+	}
-+
- 	return false;
- }
- 
-@@ -1062,10 +1103,24 @@ int __hot dpa_tx_extended(struct sk_buff
- 	struct dpa_percpu_priv_s *percpu_priv;
- 	struct rtnl_link_stats64 *percpu_stats;
- 	int err = 0;
--	bool nonlinear;
-+	bool nonlinear, skb_changed, skb_need_wa;
- 	int *countptr, offset = 0;
- 	struct sk_buff *nskb;
- 
-+	/* Flags to help optimize the A010022 errata restriction checks.
-+	 *
-+	 * First flag marks if the skb changed between the first A010022 check
-+	 * and the moment it's converted to an FD.
-+	 *
-+	 * The second flag marks if the skb needs to be realigned in order to
-+	 * avoid the errata.
-+	 *
-+	 * The flags should have minimal impact on platforms not impacted by
-+	 * the errata.
-+	 */
-+	skb_changed = false;
-+	skb_need_wa = false;
-+
- 	priv = netdev_priv(net_dev);
- 	/* Non-migratable context, safe to use raw_cpu_ptr */
- 	percpu_priv = raw_cpu_ptr(priv->percpu_priv);
-@@ -1075,13 +1130,8 @@ int __hot dpa_tx_extended(struct sk_buff
- 	clear_fd(&fd);
- 
- #ifndef CONFIG_PPC
--	if (unlikely(dpaa_errata_a010022) && a010022_check_skb(skb, priv)) {
--		nskb = a010022_realign_skb(skb, priv);
--		if (!nskb)
--			goto skb_to_fd_failed;
--		dev_kfree_skb(skb);
--		skb = nskb;
--	}
-+	if (unlikely(dpaa_errata_a010022) && a010022_check_skb(skb, priv))
-+		skb_need_wa = true;
- #endif
- 
- 	nonlinear = skb_is_nonlinear(skb);
-@@ -1102,8 +1152,8 @@ int __hot dpa_tx_extended(struct sk_buff
- 	 * Btw, we're using the first sgt entry to store the linear part of
- 	 * the skb, so we're one extra frag short.
- 	 */
--	if (nonlinear &&
--		likely(skb_shinfo(skb)->nr_frags < DPA_SGT_MAX_ENTRIES)) {
-+	if (nonlinear && !skb_need_wa &&
-+	    likely(skb_shinfo(skb)->nr_frags < DPA_SGT_MAX_ENTRIES)) {
- 		/* Just create a S/G fd based on the skb */
- 		err = skb_to_sg_fd(priv, skb, &fd);
- 		percpu_priv->tx_frag_skbuffs++;
-@@ -1128,39 +1178,62 @@ int __hot dpa_tx_extended(struct sk_buff
- 
- 			dev_kfree_skb(skb);
- 			skb = skb_new;
-+			skb_changed = true;
- 		}
- 
- 		/* We're going to store the skb backpointer at the beginning
- 		 * of the data buffer, so we need a privately owned skb
-+		 *
-+		 * Under the A010022 errata, we are going to have a privately
-+		 * owned skb after realigning the current one, so no point in
-+		 * copying it here in that case.
- 		 */
- 
- 		/* Code borrowed from skb_unshare(). */
--		if (skb_cloned(skb)) {
-+		if (skb_cloned(skb) && !skb_need_wa) {
- 			nskb = skb_copy(skb, GFP_ATOMIC);
- 			kfree_skb(skb);
- 			skb = nskb;
--#ifndef CONFIG_PPC
--			if (unlikely(dpaa_errata_a010022) &&
--			    a010022_check_skb(skb, priv)) {
--				nskb = a010022_realign_skb(skb, priv);
--				if (!nskb)
--					goto skb_to_fd_failed;
--				dev_kfree_skb(skb);
--				skb = nskb;
--			}
--#endif
-+			skb_changed = true;
-+
- 			/* skb_copy() has now linearized the skbuff. */
--		} else if (unlikely(nonlinear)) {
-+		} else if (unlikely(nonlinear) && !skb_need_wa) {
- 			/* We are here because the egress skb contains
- 			 * more fragments than we support. In this case,
- 			 * we have no choice but to linearize it ourselves.
- 			 */
--			err = __skb_linearize(skb);
-+#ifndef CONFIG_PPC
-+			/* No point in linearizing the skb now if we are going
-+			 * to realign and linearize it again further down due
-+			 * to the A010022 errata
-+			 */
-+			if (unlikely(dpaa_errata_a010022))
-+				skb_need_wa = true;
-+			else
-+#endif
-+				err = __skb_linearize(skb);
- 		}
- 		if (unlikely(!skb || err < 0))
- 			/* Common out-of-memory error path */
- 			goto enomem;
- 
-+#ifndef CONFIG_PPC
-+		/* Verify the skb a second time if it has been updated since
-+		 * the previous check
-+		 */
-+		if (unlikely(dpaa_errata_a010022) && skb_changed &&
-+		    a010022_check_skb(skb, priv))
-+			skb_need_wa = true;
-+
-+		if (unlikely(dpaa_errata_a010022) && skb_need_wa) {
-+			nskb = a010022_realign_skb(skb, priv);
-+			if (!nskb)
-+				goto skb_to_fd_failed;
-+			dev_kfree_skb(skb);
-+			skb = nskb;
-+		}
-+#endif
-+
- 		err = skb_to_contig_fd(priv, skb, &fd, countptr, &offset);
- 	}
- 	if (unlikely(err < 0))
diff --git a/target/linux/layerscape/patches-5.4/701-net-0359-sdk_dpaa-ls1043a-errata-re-enable-SG-support-and-rec.patch b/target/linux/layerscape/patches-5.4/701-net-0359-sdk_dpaa-ls1043a-errata-re-enable-SG-support-and-rec.patch
deleted file mode 100644
index d6bb4c45e9..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0359-sdk_dpaa-ls1043a-errata-re-enable-SG-support-and-rec.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From fc7824df7022869a403c8a5122a55fe73a193466 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Tue, 29 Oct 2019 16:50:34 +0200
-Subject: [PATCH] sdk_dpaa: ls1043a errata: re-enable SG support and recycling
-
-With certain limitation, SG frames can be used safely without triggering
-the errata.
-
-Buffers can be recycled, even after realigning the data.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c    | 10 ----------
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h    |  1 -
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c |  9 ---------
- 3 files changed, 20 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-@@ -778,16 +778,6 @@ static int dpa_private_netdev_init(struc
- 	/* Advertise NETIF_F_HW_ACCEL_MQ to avoid Tx timeout warnings */
- 	net_dev->features |= NETIF_F_HW_ACCEL_MQ;
- 
--#ifndef CONFIG_PPC
--	/* Due to the A010022 FMan errata, we can not use S/G frames. We need
--	 * to stop advertising S/G and GSO support.
--	 */
--	if (unlikely(dpaa_errata_a010022)) {
--		net_dev->hw_features &= ~NETIF_F_SG;
--		net_dev->features &= ~NETIF_F_GSO;
--	}
--#endif
--
- 	return dpa_netdev_init(net_dev, mac_addr, tx_timeout);
- }
- 
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-@@ -661,7 +661,6 @@ static inline void _dpa_bp_free_pf(void
- 
- #ifndef CONFIG_PPC
- extern bool dpaa_errata_a010022; /* SoC affected by A010022 errata */
--#define NONREC_MARK	0x01
- #define CROSS_4K(start, size) \
- 	(((uintptr_t)(start) + (size)) > \
- 	 (((uintptr_t)(start) + 0x1000) & ~0xFFF))
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -327,12 +327,6 @@ EXPORT_SYMBOL(_dpa_cleanup_tx_fd);
- #ifndef CONFIG_FSL_DPAA_TS
- bool dpa_skb_is_recyclable(struct sk_buff *skb)
- {
--#ifndef CONFIG_PPC
--	/* Do no recycle skbs realigned by the errata workaround */
--	if (unlikely(dpaa_errata_a010022) && skb->mark == NONREC_MARK)
--		return false;
--#endif
--
- 	/* No recycling possible if skb buffer is kmalloc'ed  */
- 	if (skb->head_frag == 0)
- 		return false;
-@@ -906,9 +900,6 @@ static struct sk_buff *a010022_realign_s
- 	skb_set_network_header(nskb, net_offset);
- 	skb_set_transport_header(nskb, trans_offset);
- 
--	/* We don't want the buffer to be recycled so we mark it accordingly */
--	nskb->mark = NONREC_MARK;
--
- 	return nskb;
- 
- err:
diff --git a/target/linux/layerscape/patches-5.4/701-net-0360-sdk_dpaa-sdk_fman-ls1043a-errata-detect-based-on-DTB.patch b/target/linux/layerscape/patches-5.4/701-net-0360-sdk_dpaa-sdk_fman-ls1043a-errata-detect-based-on-DTB.patch
deleted file mode 100644
index e9e5ae03dd..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0360-sdk_dpaa-sdk_fman-ls1043a-errata-detect-based-on-DTB.patch
+++ /dev/null
@@ -1,297 +0,0 @@
-From 6dbf409f09fd85d738652c7867a5822f682d5682 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Thu, 12 Dec 2019 14:15:05 +0200
-Subject: [PATCH] sdk_dpaa: sdk_fman: ls1043a errata: detect based on DTB
- property
-
-Detect if the platform is vulnerable to the A010022 erratum based on device
-tree properties instead of the SoC family.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c | 31 +---------------------
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h | 14 +++++-----
- .../net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c  | 25 ++++++++---------
- .../inc/integrations/LS1043/dpaa_integration_ext.h |  3 +++
- .../sdk_fman/src/inc/wrapper/lnxwrp_fsl_fman.h     | 10 +++++++
- .../freescale/sdk_fman/src/wrapper/lnxwrp_fm.c     | 17 ++++++++++++
- 6 files changed, 51 insertions(+), 49 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-@@ -1,4 +1,5 @@
- /* Copyright 2008-2013 Freescale Semiconductor Inc.
-+ * Copyright 2019 NXP
-  *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted provided that the following conditions are met:
-@@ -105,11 +106,6 @@ static const char rtx[][3] = {
- 	[TX] = "TX"
- };
- 
--#ifndef CONFIG_PPC
--bool dpaa_errata_a010022;
--EXPORT_SYMBOL(dpaa_errata_a010022);
--#endif
--
- /* BM */
- 
- #define DPAA_ETH_MAX_PAD (L1_CACHE_BYTES * 8)
-@@ -1133,26 +1129,6 @@ static struct platform_driver dpa_driver
- 	.remove		= dpa_remove
- };
- 
--#ifndef CONFIG_PPC
--static bool __init __cold soc_has_errata_a010022(void)
--{
--#ifdef CONFIG_SOC_BUS
--	const struct soc_device_attribute soc_msi_matches[] = {
--		{ .family = "QorIQ LS1043A",
--		  .data = NULL },
--		{ },
--	};
--
--	if (soc_device_match(soc_msi_matches))
--		return true;
--
--	return false;
--#else
--	return true; /* cannot identify SoC */
--#endif
--}
--#endif
--
- static int __init __cold dpa_load(void)
- {
- 	int	 _errno;
-@@ -1168,11 +1144,6 @@ static int __init __cold dpa_load(void)
- 	dpa_max_frm = fm_get_max_frm();
- 	dpa_num_cpus = num_possible_cpus();
- 
--#ifndef CONFIG_PPC
--	/* Detect if the current SoC requires the 4K alignment workaround */
--	dpaa_errata_a010022 = soc_has_errata_a010022();
--#endif
--
- #ifdef CONFIG_FSL_DPAA_DBG_LOOP
- 	memset(dpa_loop_netdevs, 0, sizeof(dpa_loop_netdevs));
- #endif
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-@@ -1,4 +1,5 @@
- /* Copyright 2008-2012 Freescale Semiconductor Inc.
-+ * Copyright 2019 NXP
-  *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted provided that the following conditions are met:
-@@ -98,15 +99,15 @@ struct dpa_buffer_layout_s {
-  * space to account for further alignments.
-  */
- #define DPA_MAX_FRM_SIZE	9600
--#ifdef CONFIG_PPC
-+#ifndef FM_ERRATUM_A010022
- #define DPA_BP_RAW_SIZE \
- 	((DPA_MAX_FRM_SIZE + DPA_MAX_FD_OFFSET + \
- 	  sizeof(struct skb_shared_info) + 128) & ~(SMP_CACHE_BYTES - 1))
--#else /* CONFIG_PPC */
--#define DPA_BP_RAW_SIZE ((unlikely(dpaa_errata_a010022)) ? 2048 : \
-+#else /* FM_ERRATUM_A010022 */
-+#define DPA_BP_RAW_SIZE ((unlikely(fm_has_errata_a010022())) ? 2048 : \
- 	((DPA_MAX_FRM_SIZE + DPA_MAX_FD_OFFSET + \
- 	  sizeof(struct skb_shared_info) + 128) & ~(SMP_CACHE_BYTES - 1)))
--#endif /* CONFIG_PPC */
-+#endif /* FM_ERRATUM_A010022 */
- #endif /* CONFIG_FSL_DPAA_ETH_JUMBO_FRAME */
- 
- /* This is what FMan is ever allowed to use.
-@@ -659,8 +660,7 @@ static inline void _dpa_bp_free_pf(void
-  * on egress.
-  */
- 
--#ifndef CONFIG_PPC
--extern bool dpaa_errata_a010022; /* SoC affected by A010022 errata */
-+#ifdef FM_ERRATUM_A010022
- #define CROSS_4K(start, size) \
- 	(((uintptr_t)(start) + (size)) > \
- 	 (((uintptr_t)(start) + 0x1000) & ~0xFFF))
-@@ -668,6 +668,6 @@ extern bool dpaa_errata_a010022; /* SoC
-  * we reserve 256 bytes instead to guarantee 256 data alignment.
-  */
- #define DPAA_A010022_HEADROOM	256
--#endif  /* !CONFIG_PPC */
-+#endif  /* FM_ERRATUM_A010022 */
- 
- #endif	/* __DPA_H */
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -1,4 +1,5 @@
- /* Copyright 2012 Freescale Semiconductor Inc.
-+ * Copyright 2019 NXP
-  *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted provided that the following conditions are met:
-@@ -100,8 +101,8 @@ static int _dpa_bp_add_8_bufs(const stru
- 		 * We only need enough space to store a pointer, but allocate
- 		 * an entire cacheline for performance reasons.
- 		 */
--#ifndef CONFIG_PPC
--		if (unlikely(dpaa_errata_a010022)) {
-+#ifdef FM_ERRATUM_A010022
-+		if (unlikely(fm_has_errata_a010022())) {
- 			struct page *new_page = alloc_page(GFP_ATOMIC);
- 			if (unlikely(!new_page))
- 				goto netdev_alloc_failed;
-@@ -764,7 +765,7 @@ int __hot skb_to_contig_fd(struct dpa_pr
- }
- EXPORT_SYMBOL(skb_to_contig_fd);
- 
--#ifndef CONFIG_PPC
-+#ifdef FM_ERRATUM_A010022
- /* Verify the conditions that trigger the A010022 errata:
-  * - 4K memory address boundary crossings when the data/SG fragments aren't
-  *   aligned to 256 bytes
-@@ -940,8 +941,8 @@ int __hot skb_to_sg_fd(struct dpa_priv_s
- 	/* Get a page frag to store the SGTable, or a full page if the errata
- 	 * is in place and we need to avoid crossing a 4k boundary.
- 	 */
--#ifndef CONFIG_PPC
--	if (unlikely(dpaa_errata_a010022)) {
-+#ifdef FM_ERRATUM_A010022
-+	if (unlikely(fm_has_errata_a010022())) {
- 		struct page *new_page = alloc_page(GFP_ATOMIC);
- 
- 		if (unlikely(!new_page))
-@@ -1120,8 +1121,8 @@ int __hot dpa_tx_extended(struct sk_buff
- 
- 	clear_fd(&fd);
- 
--#ifndef CONFIG_PPC
--	if (unlikely(dpaa_errata_a010022) && a010022_check_skb(skb, priv))
-+#ifdef FM_ERRATUM_A010022
-+	if (unlikely(fm_has_errata_a010022()) && a010022_check_skb(skb, priv))
- 		skb_need_wa = true;
- #endif
- 
-@@ -1193,12 +1194,12 @@ int __hot dpa_tx_extended(struct sk_buff
- 			 * more fragments than we support. In this case,
- 			 * we have no choice but to linearize it ourselves.
- 			 */
--#ifndef CONFIG_PPC
-+#ifdef FM_ERRATUM_A010022
- 			/* No point in linearizing the skb now if we are going
- 			 * to realign and linearize it again further down due
- 			 * to the A010022 errata
- 			 */
--			if (unlikely(dpaa_errata_a010022))
-+			if (unlikely(fm_has_errata_a010022()))
- 				skb_need_wa = true;
- 			else
- #endif
-@@ -1208,15 +1209,15 @@ int __hot dpa_tx_extended(struct sk_buff
- 			/* Common out-of-memory error path */
- 			goto enomem;
- 
--#ifndef CONFIG_PPC
-+#ifdef FM_ERRATUM_A010022
- 		/* Verify the skb a second time if it has been updated since
- 		 * the previous check
- 		 */
--		if (unlikely(dpaa_errata_a010022) && skb_changed &&
-+		if (unlikely(fm_has_errata_a010022()) && skb_changed &&
- 		    a010022_check_skb(skb, priv))
- 			skb_need_wa = true;
- 
--		if (unlikely(dpaa_errata_a010022) && skb_need_wa) {
-+		if (unlikely(fm_has_errata_a010022()) && skb_need_wa) {
- 			nskb = a010022_realign_skb(skb, priv);
- 			if (!nskb)
- 				goto skb_to_fd_failed;
---- a/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/LS1043/dpaa_integration_ext.h
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/LS1043/dpaa_integration_ext.h
-@@ -1,5 +1,6 @@
- /*
-  * Copyright 2012 Freescale Semiconductor Inc.
-+ * Copyright 2019 NXP
-  *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted provided that the following conditions are met:
-@@ -270,6 +271,8 @@ typedef enum
- #define FM_AID_MODE_NO_TNUM_SW005 /* refer to pdm TKT068794 - only support of port_id on aid */
- #define FM_ERROR_VSP_NO_MATCH_SW006 /* refer to pdm TKT174304 - no match between errorQ and VSP */
- 
-+#define FM_ERRATUM_A010022
-+
- /*****************************************************************************
-  RMan INTEGRATION-SPECIFIC DEFINITIONS
- ******************************************************************************/
---- a/drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/lnxwrp_fsl_fman.h
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/lnxwrp_fsl_fman.h
-@@ -1,5 +1,6 @@
- /*
-  * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ * Copyright 2019 NXP
-  *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted provided that the following conditions are met:
-@@ -489,6 +490,15 @@ int fm_get_max_frm(void);
- int fm_get_rx_extra_headroom(void);
- 
- /**************************************************************************//**
-+ @Function	fm_has_errata_a010022
-+
-+ @Description   Detect if the SoC is vulnerable to the A010022 errata
-+*//***************************************************************************/
-+#ifdef FM_ERRATUM_A010022
-+bool fm_has_errata_a010022(void);
-+#endif
-+
-+/**************************************************************************//**
- @Function     fm_port_set_rate_limit
- 
- @Description  Configure Shaper parameter on FM-port device (Tx port).
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-@@ -1,5 +1,6 @@
- /*
-  * Copyright 2008-2012 Freescale Semiconductor Inc.
-+ * Copyright 2019 NXP
-  *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted provided that the following conditions are met:
-@@ -155,6 +156,10 @@ static int fsl_fm_pfc_quanta[] = {
- 
- static t_LnxWrpFm   lnxWrpFm;
- 
-+#ifdef FM_ERRATUM_A010022
-+static bool fm_has_err_a010022;
-+#endif
-+
- int fm_get_max_frm()
- {
- 	return fsl_fm_max_frm;
-@@ -167,6 +172,14 @@ int fm_get_rx_extra_headroom()
- }
- EXPORT_SYMBOL(fm_get_rx_extra_headroom);
- 
-+#ifdef FM_ERRATUM_A010022
-+bool fm_has_errata_a010022(void)
-+{
-+	return fm_has_err_a010022;
-+}
-+EXPORT_SYMBOL(fm_has_errata_a010022);
-+#endif
-+
- static int __init fm_set_max_frm(char *str)
- {
- 	int ret = 0;
-@@ -749,6 +762,10 @@ static t_LnxWrpFmDev * ReadFmDevTreeNode
-             p_LnxWrpFmDev->defPcd = e_NO_PCD;
-     }
- 
-+#ifdef FM_ERRATUM_A010022
-+    fm_has_err_a010022 = of_property_read_bool(fm_node, "fsl,erratum-a010022");
-+#endif
-+
-     of_node_put(fm_node);
- 
-     p_LnxWrpFmDev->hcCh =
diff --git a/target/linux/layerscape/patches-5.4/701-net-0361-sdk_dpaa-sdk_fman-ls1034a-errata-update-number-to-A0.patch b/target/linux/layerscape/patches-5.4/701-net-0361-sdk_dpaa-sdk_fman-ls1034a-errata-update-number-to-A0.patch
deleted file mode 100644
index f9b0c70586..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0361-sdk_dpaa-sdk_fman-ls1034a-errata-update-number-to-A0.patch
+++ /dev/null
@@ -1,259 +0,0 @@
-From 512bb2bd0555a8e78713dfdc109d87723a9da5c1 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Fri, 13 Dec 2019 14:49:16 +0200
-Subject: [PATCH] sdk_dpaa: sdk_fman: ls1034a errata: update number to A050385
-
-The A050385 erratum extends the A010022 erratum by defining additional
-FMan lock-up conditions and suggests new w/a restrictions.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h | 14 +++----
- .../net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c  | 44 +++++++++++-----------
- .../inc/integrations/LS1043/dpaa_integration_ext.h |  2 +-
- .../sdk_fman/src/inc/wrapper/lnxwrp_fsl_fman.h     |  8 ++--
- .../freescale/sdk_fman/src/wrapper/lnxwrp_fm.c     | 16 ++++----
- 5 files changed, 42 insertions(+), 42 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
-@@ -99,15 +99,15 @@ struct dpa_buffer_layout_s {
-  * space to account for further alignments.
-  */
- #define DPA_MAX_FRM_SIZE	9600
--#ifndef FM_ERRATUM_A010022
-+#ifndef FM_ERRATUM_A050385
- #define DPA_BP_RAW_SIZE \
- 	((DPA_MAX_FRM_SIZE + DPA_MAX_FD_OFFSET + \
- 	  sizeof(struct skb_shared_info) + 128) & ~(SMP_CACHE_BYTES - 1))
--#else /* FM_ERRATUM_A010022 */
--#define DPA_BP_RAW_SIZE ((unlikely(fm_has_errata_a010022())) ? 2048 : \
-+#else /* FM_ERRATUM_A050385 */
-+#define DPA_BP_RAW_SIZE ((unlikely(fm_has_errata_a050385())) ? 2048 : \
- 	((DPA_MAX_FRM_SIZE + DPA_MAX_FD_OFFSET + \
- 	  sizeof(struct skb_shared_info) + 128) & ~(SMP_CACHE_BYTES - 1)))
--#endif /* FM_ERRATUM_A010022 */
-+#endif /* FM_ERRATUM_A050385 */
- #endif /* CONFIG_FSL_DPAA_ETH_JUMBO_FRAME */
- 
- /* This is what FMan is ever allowed to use.
-@@ -660,14 +660,14 @@ static inline void _dpa_bp_free_pf(void
-  * on egress.
-  */
- 
--#ifdef FM_ERRATUM_A010022
-+#ifdef FM_ERRATUM_A050385
- #define CROSS_4K(start, size) \
- 	(((uintptr_t)(start) + (size)) > \
- 	 (((uintptr_t)(start) + 0x1000) & ~0xFFF))
- /* The headroom needs to accommodate our private data (64 bytes) but
-  * we reserve 256 bytes instead to guarantee 256 data alignment.
-  */
--#define DPAA_A010022_HEADROOM	256
--#endif  /* FM_ERRATUM_A010022 */
-+#define DPAA_A050385_HEADROOM	256
-+#endif  /* FM_ERRATUM_A050385 */
- 
- #endif	/* __DPA_H */
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
-@@ -101,8 +101,8 @@ static int _dpa_bp_add_8_bufs(const stru
- 		 * We only need enough space to store a pointer, but allocate
- 		 * an entire cacheline for performance reasons.
- 		 */
--#ifdef FM_ERRATUM_A010022
--		if (unlikely(fm_has_errata_a010022())) {
-+#ifdef FM_ERRATUM_A050385
-+		if (unlikely(fm_has_errata_a050385())) {
- 			struct page *new_page = alloc_page(GFP_ATOMIC);
- 			if (unlikely(!new_page))
- 				goto netdev_alloc_failed;
-@@ -765,15 +765,15 @@ int __hot skb_to_contig_fd(struct dpa_pr
- }
- EXPORT_SYMBOL(skb_to_contig_fd);
- 
--#ifdef FM_ERRATUM_A010022
--/* Verify the conditions that trigger the A010022 errata:
-+#ifdef FM_ERRATUM_A050385
-+/* Verify the conditions that trigger the A050385 errata:
-  * - 4K memory address boundary crossings when the data/SG fragments aren't
-  *   aligned to 256 bytes
-  * - data and SG fragments that aren't aligned to 16 bytes
-  * - SG fragments that aren't mod 16 bytes in size (except for the last
-  *   fragment)
-  */
--static bool a010022_check_skb(struct sk_buff *skb, struct dpa_priv_s *priv)
-+static bool a050385_check_skb(struct sk_buff *skb, struct dpa_priv_s *priv)
- {
- 	skb_frag_t *frag;
- 	int i, nr_frags;
-@@ -840,7 +840,7 @@ static bool a010022_check_skb(struct sk_
-  * page. Build a new skb around the new buffer and release the old one.
-  * A performance drop should be expected.
-  */
--static struct sk_buff *a010022_realign_skb(struct sk_buff *skb,
-+static struct sk_buff *a050385_realign_skb(struct sk_buff *skb,
- 					   struct dpa_priv_s *priv)
- {
- 	int trans_offset = skb_transport_offset(skb);
-@@ -850,7 +850,7 @@ static struct sk_buff *a010022_realign_s
- 	struct page *npage;
- 	void *npage_addr;
- 
--	headroom = DPAA_A010022_HEADROOM;
-+	headroom = DPAA_A050385_HEADROOM;
- 
- 	/* For the new skb we only need the old one's data (both non-paged and
- 	 * paged). We can skip the old tailroom.
-@@ -941,8 +941,8 @@ int __hot skb_to_sg_fd(struct dpa_priv_s
- 	/* Get a page frag to store the SGTable, or a full page if the errata
- 	 * is in place and we need to avoid crossing a 4k boundary.
- 	 */
--#ifdef FM_ERRATUM_A010022
--	if (unlikely(fm_has_errata_a010022())) {
-+#ifdef FM_ERRATUM_A050385
-+	if (unlikely(fm_has_errata_a050385())) {
- 		struct page *new_page = alloc_page(GFP_ATOMIC);
- 
- 		if (unlikely(!new_page))
-@@ -1099,9 +1099,9 @@ int __hot dpa_tx_extended(struct sk_buff
- 	int *countptr, offset = 0;
- 	struct sk_buff *nskb;
- 
--	/* Flags to help optimize the A010022 errata restriction checks.
-+	/* Flags to help optimize the A050385 errata restriction checks.
- 	 *
--	 * First flag marks if the skb changed between the first A010022 check
-+	 * First flag marks if the skb changed between the first A050385 check
- 	 * and the moment it's converted to an FD.
- 	 *
- 	 * The second flag marks if the skb needs to be realigned in order to
-@@ -1121,8 +1121,8 @@ int __hot dpa_tx_extended(struct sk_buff
- 
- 	clear_fd(&fd);
- 
--#ifdef FM_ERRATUM_A010022
--	if (unlikely(fm_has_errata_a010022()) && a010022_check_skb(skb, priv))
-+#ifdef FM_ERRATUM_A050385
-+	if (unlikely(fm_has_errata_a050385()) && a050385_check_skb(skb, priv))
- 		skb_need_wa = true;
- #endif
- 
-@@ -1176,7 +1176,7 @@ int __hot dpa_tx_extended(struct sk_buff
- 		/* We're going to store the skb backpointer at the beginning
- 		 * of the data buffer, so we need a privately owned skb
- 		 *
--		 * Under the A010022 errata, we are going to have a privately
-+		 * Under the A050385 errata, we are going to have a privately
- 		 * owned skb after realigning the current one, so no point in
- 		 * copying it here in that case.
- 		 */
-@@ -1194,12 +1194,12 @@ int __hot dpa_tx_extended(struct sk_buff
- 			 * more fragments than we support. In this case,
- 			 * we have no choice but to linearize it ourselves.
- 			 */
--#ifdef FM_ERRATUM_A010022
-+#ifdef FM_ERRATUM_A050385
- 			/* No point in linearizing the skb now if we are going
- 			 * to realign and linearize it again further down due
--			 * to the A010022 errata
-+			 * to the A050385 errata
- 			 */
--			if (unlikely(fm_has_errata_a010022()))
-+			if (unlikely(fm_has_errata_a050385()))
- 				skb_need_wa = true;
- 			else
- #endif
-@@ -1209,16 +1209,16 @@ int __hot dpa_tx_extended(struct sk_buff
- 			/* Common out-of-memory error path */
- 			goto enomem;
- 
--#ifdef FM_ERRATUM_A010022
-+#ifdef FM_ERRATUM_A050385
- 		/* Verify the skb a second time if it has been updated since
- 		 * the previous check
- 		 */
--		if (unlikely(fm_has_errata_a010022()) && skb_changed &&
--		    a010022_check_skb(skb, priv))
-+		if (unlikely(fm_has_errata_a050385()) && skb_changed &&
-+		    a050385_check_skb(skb, priv))
- 			skb_need_wa = true;
- 
--		if (unlikely(fm_has_errata_a010022()) && skb_need_wa) {
--			nskb = a010022_realign_skb(skb, priv);
-+		if (unlikely(fm_has_errata_a050385()) && skb_need_wa) {
-+			nskb = a050385_realign_skb(skb, priv);
- 			if (!nskb)
- 				goto skb_to_fd_failed;
- 			dev_kfree_skb(skb);
---- a/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/LS1043/dpaa_integration_ext.h
-+++ b/drivers/net/ethernet/freescale/sdk_fman/inc/integrations/LS1043/dpaa_integration_ext.h
-@@ -271,7 +271,7 @@ typedef enum
- #define FM_AID_MODE_NO_TNUM_SW005 /* refer to pdm TKT068794 - only support of port_id on aid */
- #define FM_ERROR_VSP_NO_MATCH_SW006 /* refer to pdm TKT174304 - no match between errorQ and VSP */
- 
--#define FM_ERRATUM_A010022
-+#define FM_ERRATUM_A050385
- 
- /*****************************************************************************
-  RMan INTEGRATION-SPECIFIC DEFINITIONS
---- a/drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/lnxwrp_fsl_fman.h
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/lnxwrp_fsl_fman.h
-@@ -490,12 +490,12 @@ int fm_get_max_frm(void);
- int fm_get_rx_extra_headroom(void);
- 
- /**************************************************************************//**
-- @Function	fm_has_errata_a010022
-+ @Function	fm_has_errata_a050385
- 
-- @Description   Detect if the SoC is vulnerable to the A010022 errata
-+ @Description   Detect if the SoC is vulnerable to the A050385 errata
- *//***************************************************************************/
--#ifdef FM_ERRATUM_A010022
--bool fm_has_errata_a010022(void);
-+#ifdef FM_ERRATUM_A050385
-+bool fm_has_errata_a050385(void);
- #endif
- 
- /**************************************************************************//**
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-@@ -156,8 +156,8 @@ static int fsl_fm_pfc_quanta[] = {
- 
- static t_LnxWrpFm   lnxWrpFm;
- 
--#ifdef FM_ERRATUM_A010022
--static bool fm_has_err_a010022;
-+#ifdef FM_ERRATUM_A050385
-+static bool fm_has_err_a050385;
- #endif
- 
- int fm_get_max_frm()
-@@ -172,12 +172,12 @@ int fm_get_rx_extra_headroom()
- }
- EXPORT_SYMBOL(fm_get_rx_extra_headroom);
- 
--#ifdef FM_ERRATUM_A010022
--bool fm_has_errata_a010022(void)
-+#ifdef FM_ERRATUM_A050385
-+bool fm_has_errata_a050385(void)
- {
--	return fm_has_err_a010022;
-+	return fm_has_err_a050385;
- }
--EXPORT_SYMBOL(fm_has_errata_a010022);
-+EXPORT_SYMBOL(fm_has_errata_a050385);
- #endif
- 
- static int __init fm_set_max_frm(char *str)
-@@ -762,8 +762,8 @@ static t_LnxWrpFmDev * ReadFmDevTreeNode
-             p_LnxWrpFmDev->defPcd = e_NO_PCD;
-     }
- 
--#ifdef FM_ERRATUM_A010022
--    fm_has_err_a010022 = of_property_read_bool(fm_node, "fsl,erratum-a010022");
-+#ifdef FM_ERRATUM_A050385
-+    fm_has_err_a050385 = of_property_read_bool(fm_node, "fsl,erratum-a050385");
- #endif
- 
-     of_node_put(fm_node);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0362-sdk_dpaa-ceetm-remove-references-to-qdisc_lookup.patch b/target/linux/layerscape/patches-5.4/701-net-0362-sdk_dpaa-ceetm-remove-references-to-qdisc_lookup.patch
deleted file mode 100644
index 652ab89dd8..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0362-sdk_dpaa-ceetm-remove-references-to-qdisc_lookup.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From d6fc3dc5591ca4f0b2a5a77b210c622d8b709362 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Fri, 20 Dec 2019 15:56:53 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: remove references to qdisc_lookup
-
-In order to enable building the driver as a module, remove the
-references to the undefined qdisc_lookup symbol.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c   | 49 ++++++++++++++++------
- 1 file changed, 36 insertions(+), 13 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -812,8 +812,8 @@ static int ceetm_init_prio(struct Qdisc
- 	int err;
- 	unsigned int i;
- 	struct ceetm_class *parent_cl, *child_cl;
--	struct Qdisc *parent_qdisc;
- 	struct net_device *dev = qdisc_dev(sch);
-+	struct Qdisc *root_qdisc = dev->qdisc;
- 
- 	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
- 
-@@ -822,14 +822,18 @@ static int ceetm_init_prio(struct Qdisc
- 		return -EINVAL;
- 	}
- 
--	parent_qdisc = qdisc_lookup(dev, TC_H_MAJ(sch->parent));
--	if (strcmp(parent_qdisc->ops->id, ceetm_qdisc_ops.id)) {
-+	if (TC_H_MAJ(sch->parent) != TC_H_MAJ(root_qdisc->handle)) {
-+		pr_err("CEETM: a prio ceetm qdiscs can be added only under a root ceetm class\n");
-+		return -EINVAL;
-+	}
-+
-+	if (strcmp(root_qdisc->ops->id, ceetm_qdisc_ops.id)) {
- 		pr_err("CEETM: a ceetm qdisc can not be attached to other qdisc/class types\n");
- 		return -EINVAL;
- 	}
- 
- 	/* Obtain the parent root ceetm_class */
--	parent_cl = ceetm_find(sch->parent, parent_qdisc);
-+	parent_cl = ceetm_find(sch->parent, root_qdisc);
- 
- 	if (!parent_cl || parent_cl->type != CEETM_ROOT) {
- 		pr_err("CEETM: a prio ceetm qdiscs can be added only under a root ceetm class\n");
-@@ -902,9 +906,9 @@ static int ceetm_init_wbfs(struct Qdisc
- {
- 	int err, group_b, small_group;
- 	unsigned int i, id, prio_a, prio_b;
--	struct ceetm_class *parent_cl, *child_cl, *root_cl;
--	struct Qdisc *parent_qdisc;
--	struct ceetm_qdisc *parent_priv;
-+	struct ceetm_class *parent_cl, *child_cl, *tmp_cl, *root_cl = NULL;
-+	struct Qdisc *root_qdisc, *parent_qdisc = NULL;
-+	struct ceetm_qdisc *root_priv;
- 	struct net_device *dev = qdisc_dev(sch);
- 
- 	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
-@@ -915,16 +919,37 @@ static int ceetm_init_wbfs(struct Qdisc
- 		return -EINVAL;
- 	}
- 
--	/* Obtain the parent prio ceetm qdisc */
--	parent_qdisc = qdisc_lookup(dev, TC_H_MAJ(sch->parent));
--	if (strcmp(parent_qdisc->ops->id, ceetm_qdisc_ops.id)) {
-+	root_qdisc = dev->qdisc;
-+
-+	if (strcmp(root_qdisc->ops->id, ceetm_qdisc_ops.id)) {
- 		pr_err("CEETM: a ceetm qdisc can not be attached to other qdisc/class types\n");
- 		return -EINVAL;
- 	}
- 
-+	root_priv = qdisc_priv(root_qdisc);
-+
-+	/* Obtain the root ceetm class and the parent prio ceetm qdisc */
-+	for (i = 0; i < root_priv->clhash.hashsize; i++) {
-+		hlist_for_each_entry(tmp_cl, &root_priv->clhash.hash[i],
-+				     common.hnode) {
-+			if (tmp_cl->root.child &&
-+			    (TC_H_MAJ(tmp_cl->root.child->handle) ==
-+			    TC_H_MAJ(sch->parent))) {
-+				parent_qdisc = tmp_cl->root.child;
-+				root_cl = tmp_cl;
-+				break;
-+			}
-+		}
-+	}
-+
-+	if (!parent_qdisc ||
-+	    strcmp(parent_qdisc->ops->id, ceetm_qdisc_ops.id)) {
-+		pr_err("CEETM: a wbfs ceetm qdiscs can be added only under a prio ceetm class\n");
-+		return -EINVAL;
-+	}
-+
- 	/* Obtain the parent prio ceetm class */
- 	parent_cl = ceetm_find(sch->parent, parent_qdisc);
--	parent_priv = qdisc_priv(parent_qdisc);
- 
- 	if (!parent_cl || parent_cl->type != CEETM_PRIO) {
- 		pr_err("CEETM: a wbfs ceetm qdiscs can be added only under a prio ceetm class\n");
-@@ -948,8 +973,6 @@ static int ceetm_init_wbfs(struct Qdisc
- 		return -EINVAL;
- 	}
- 
--	/* Obtain the parent root ceetm class */
--	root_cl = parent_priv->prio.parent;
- 	if ((root_cl->root.wbfs_grp_a && root_cl->root.wbfs_grp_b) ||
- 	    root_cl->root.wbfs_grp_large) {
- 		pr_err("CEETM: no more wbfs classes are available\n");
diff --git a/target/linux/layerscape/patches-5.4/701-net-0363-sdk_dpaa-ceetm-export-the-ceetm_tx-symbol.patch b/target/linux/layerscape/patches-5.4/701-net-0363-sdk_dpaa-ceetm-export-the-ceetm_tx-symbol.patch
deleted file mode 100644
index 0d82df49fa..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0363-sdk_dpaa-ceetm-export-the-ceetm_tx-symbol.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From c741a131f2fb267b5b3bb333aca2453a07536535 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Fri, 20 Dec 2019 16:00:07 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: export the ceetm_tx symbol
-
-In order to enable building the driver as a module, export the ceetm_tx
-symbol for the DPAA Ethernet driver to use.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -2077,6 +2077,7 @@ drop:
- 	dev_kfree_skb_any(skb);
- 	return NET_XMIT_SUCCESS;
- }
-+EXPORT_SYMBOL(ceetm_tx);
- 
- static int __init ceetm_register(void)
- {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0364-sdk_dpaa-ceetm-enable-building-as-a-module.patch b/target/linux/layerscape/patches-5.4/701-net-0364-sdk_dpaa-ceetm-enable-building-as-a-module.patch
deleted file mode 100644
index a1bc652be9..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0364-sdk_dpaa-ceetm-enable-building-as-a-module.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 047bb6ca46d7cd8b2400bfbf062469ff84cec3d3 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Fri, 20 Dec 2019 16:01:23 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: enable building as a module
-
-Enable building the driver as a module by adding the required module
-macros and creating the fsl_ceetm object file.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/Makefile         | 4 +++-
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c | 2 ++
- 2 files changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/Makefile
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/Makefile
-@@ -17,9 +17,11 @@ endif
- ifeq ($(CONFIG_FSL_DPAA_1588),y)
- fsl_dpa-objs += dpaa_1588.o
- endif
-+
- ifeq ($(CONFIG_FSL_DPAA_CEETM),y)
- ccflags-y += -I$(srctree)/drivers/net/ethernet/freescale/sdk_fman/src/wrapper
--fsl_dpa-objs += dpaa_eth_ceetm.o
-+obj-$(CONFIG_FSL_SDK_DPAA_ETH) += fsl_ceetm.o
-+fsl_ceetm-objs += dpaa_eth_ceetm.o
- endif
- 
- fsl_mac-objs += mac.o mac-api.o
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -33,6 +33,8 @@
- #include "dpaa_eth_ceetm.h"
- 
- #define DPA_CEETM_DESCRIPTION "FSL DPAA CEETM qdisc"
-+MODULE_LICENSE("Dual BSD/GPL");
-+MODULE_DESCRIPTION(DPA_CEETM_DESCRIPTION);
- 
- const struct nla_policy ceetm_policy[TCA_CEETM_MAX + 1] = {
- 	[TCA_CEETM_COPT] = { .len = sizeof(struct tc_ceetm_copt) },
diff --git a/target/linux/layerscape/patches-5.4/701-net-0365-sdk_dpaa-ceetm-coding-style-cleanup.patch b/target/linux/layerscape/patches-5.4/701-net-0365-sdk_dpaa-ceetm-coding-style-cleanup.patch
deleted file mode 100644
index 13ae5e5321..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0365-sdk_dpaa-ceetm-coding-style-cleanup.patch
+++ /dev/null
@@ -1,431 +0,0 @@
-From fec484580477d93cd69e5355be68e6f5bf1a1e54 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Mon, 9 Dec 2019 18:20:05 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: coding style cleanup
-
-Fix checkpatch warnings and use reverse Christmas tree variable ordering
-throughout the driver.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c   | 145 +++++++++++----------
- 1 file changed, 76 insertions(+), 69 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -1,4 +1,5 @@
- /* Copyright 2008-2016 Freescale Semiconductor Inc.
-+ * Copyright 2019 NXP
-  *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted provided that the following conditions are met:
-@@ -47,10 +48,10 @@ struct Qdisc_ops ceetm_qdisc_ops;
- static void get_dcp_and_sp(struct net_device *dev, enum qm_dc_portal *dcp_id,
- 			   unsigned int *sp_id)
- {
--	uint32_t channel;
--	t_LnxWrpFmPortDev *port_dev;
- 	struct dpa_priv_s *dpa_priv = netdev_priv(dev);
- 	struct mac_device *mac_dev = dpa_priv->mac_dev;
-+	t_LnxWrpFmPortDev *port_dev;
-+	uint32_t channel;
- 
- 	port_dev = (t_LnxWrpFmPortDev *)mac_dev->port_dev[TX];
- 	channel = port_dev->txCh;
-@@ -75,7 +76,7 @@ static void dpaa_drain_fqs(struct net_de
- 	struct qman_fq *fq;
- 	int ret, i;
- 
--	for (i = 0; i < DPAA_ETH_TX_QUEUES; i ++) {
-+	for (i = 0; i < DPAA_ETH_TX_QUEUES; i++) {
- 		fq = priv->egress_fqs[i];
- 		while (true) {
- 			ret = qman_query_fq_np(fq, &np);
-@@ -96,7 +97,7 @@ static void dpaa_drain_fqs(struct net_de
- static void ceetm_drain_class(struct ceetm_class *cl)
- {
- 	struct qm_mcr_ceetm_cq_query cq_query;
--	struct qm_ceetm_cq *cq;
-+	struct qm_ceetm_cq *cq = NULL;
- 	unsigned int idx;
- 	int ret;
- 
-@@ -108,10 +109,10 @@ static void ceetm_drain_class(struct cee
- 		/* The ROOT classes aren't directly linked to CEETM CQs */
- 		return;
- 	case CEETM_PRIO:
--		cq = (struct qm_ceetm_cq*)cl->prio.cq;
-+		cq = (struct qm_ceetm_cq *)cl->prio.cq;
- 		break;
- 	case CEETM_WBFS:
--		cq = (struct qm_ceetm_cq*)cl->wbfs.cq;
-+		cq = (struct qm_ceetm_cq *)cl->wbfs.cq;
- 		break;
- 	}
- 
-@@ -190,10 +191,14 @@ static void ceetm_ern(struct qman_portal
- /* Congestion State Change Notification callback */
- static void ceetm_cscn(struct qm_ceetm_ccg *ccg, void *cb_ctx, int congested)
- {
--	struct ceetm_fq *ceetm_fq = (struct ceetm_fq *)cb_ctx;
--	struct dpa_priv_s *dpa_priv = netdev_priv(ceetm_fq->net_dev);
--	struct ceetm_class *cls = ceetm_fq->ceetm_cls;
- 	struct ceetm_class_stats *cstats = NULL;
-+	struct dpa_priv_s *dpa_priv;
-+	struct ceetm_fq *ceetm_fq;
-+	struct ceetm_class *cls;
-+
-+	ceetm_fq = (struct ceetm_fq *)cb_ctx;
-+	dpa_priv = netdev_priv(ceetm_fq->net_dev);
-+	cls = ceetm_fq->ceetm_cls;
- 
- 	switch (cls->type) {
- 	case CEETM_PRIO:
-@@ -236,10 +241,10 @@ static int ceetm_config_ccg(struct qm_ce
- 			    struct qm_ceetm_channel *channel, unsigned int id,
- 			    struct ceetm_fq *fq, struct dpa_priv_s *dpa_priv)
- {
--	int err;
--	u32 cs_th;
--	u16 ccg_mask;
- 	struct qm_ceetm_ccg_params ccg_params;
-+	u16 ccg_mask;
-+	u32 cs_th;
-+	int err;
- 
- 	err = qman_ceetm_ccg_claim(ccg, channel, id, ceetm_cscn, fq);
- 	if (err)
-@@ -284,9 +289,9 @@ static int ceetm_config_ccg(struct qm_ce
- static int ceetm_config_lfq(struct qm_ceetm_cq *cq, struct ceetm_fq *fq,
- 			    struct qm_ceetm_lfq **lfq)
- {
--	int err;
- 	u64 context_a;
- 	u32 context_b;
-+	int err;
- 
- 	err = qman_ceetm_lfq_claim(lfq, cq);
- 	if (err)
-@@ -316,8 +321,8 @@ static int ceetm_config_prio_cls(struct
- 				 struct net_device *dev,
- 				 unsigned int id)
- {
--	int err;
- 	struct dpa_priv_s *dpa_priv = netdev_priv(dev);
-+	int err;
- 
- 	err = ceetm_alloc_fq(&cls->prio.fq, dev, cls);
- 	if (err)
-@@ -357,8 +362,8 @@ static int ceetm_config_wbfs_cls(struct
- 				 struct net_device *dev,
- 				 unsigned int id, int type)
- {
--	int err;
- 	struct dpa_priv_s *dpa_priv = netdev_priv(dev);
-+	int err;
- 
- 	err = ceetm_alloc_fq(&cls->wbfs.fq, dev, cls);
- 	if (err)
-@@ -517,11 +522,11 @@ static void ceetm_cls_destroy(struct Qdi
- /* Destroy a ceetm qdisc */
- static void ceetm_destroy(struct Qdisc *sch)
- {
--	unsigned int ntx, i;
--	struct hlist_node *next;
--	struct ceetm_class *cl;
- 	struct ceetm_qdisc *priv = qdisc_priv(sch);
- 	struct net_device *dev = qdisc_dev(sch);
-+	struct hlist_node *next;
-+	struct ceetm_class *cl;
-+	unsigned int ntx, i;
- 
- 	pr_debug(KBUILD_BASENAME " : %s : destroy qdisc %X\n",
- 		 __func__, sch->handle);
-@@ -592,13 +597,13 @@ static void ceetm_destroy(struct Qdisc *
- 
- static int ceetm_dump(struct Qdisc *sch, struct sk_buff *skb)
- {
-+	struct ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct net_device *dev = qdisc_dev(sch);
-+	struct ceetm_qdisc_stats *qstats;
-+	struct tc_ceetm_qopt qopt;
- 	struct Qdisc *qdisc;
- 	unsigned int ntx, i;
- 	struct nlattr *nest;
--	struct tc_ceetm_qopt qopt;
--	struct ceetm_qdisc_stats *qstats;
--	struct net_device *dev = qdisc_dev(sch);
--	struct ceetm_qdisc *priv = qdisc_priv(sch);
- 
- 	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
- 
-@@ -673,17 +678,20 @@ static int ceetm_init_root(struct Qdisc
- 			   struct tc_ceetm_qopt *qopt,
- 			   struct netlink_ext_ack *extack)
- {
-+	struct net_device *dev = qdisc_dev(sch);
-+	unsigned int i, sp_id, parent_id;
- 	struct netdev_queue *dev_queue;
--	struct Qdisc *qdisc;
-+	struct dpa_priv_s *dpa_priv;
-+	struct mac_device *mac_dev;
- 	enum qm_dc_portal dcp_id;
--	unsigned int i, sp_id, parent_id;
-+	struct qm_ceetm_lni *lni;
-+	struct qm_ceetm_sp *sp;
-+	struct Qdisc *qdisc;
- 	int err;
- 	u64 bps;
--	struct qm_ceetm_sp *sp;
--	struct qm_ceetm_lni *lni;
--	struct net_device *dev = qdisc_dev(sch);
--	struct dpa_priv_s *dpa_priv = netdev_priv(dev);
--	struct mac_device *mac_dev = dpa_priv->mac_dev;
-+
-+	dpa_priv = netdev_priv(dev);
-+	mac_dev = dpa_priv->mac_dev;
- 
- 	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
- 
-@@ -711,9 +719,8 @@ static int ceetm_init_root(struct Qdisc
- 	priv->root.qdiscs = kcalloc(dev->num_tx_queues,
- 				    sizeof(priv->root.qdiscs[0]),
- 				    GFP_KERNEL);
--	if (!priv->root.qdiscs) {
-+	if (!priv->root.qdiscs)
- 		return -ENOMEM;
--	}
- 
- 	for (i = 0; i < dev->num_tx_queues; i++) {
- 		dev_queue = netdev_get_tx_queue(dev, i);
-@@ -811,11 +818,11 @@ static int ceetm_init_root(struct Qdisc
- static int ceetm_init_prio(struct Qdisc *sch, struct ceetm_qdisc *priv,
- 			   struct tc_ceetm_qopt *qopt)
- {
--	int err;
--	unsigned int i;
- 	struct ceetm_class *parent_cl, *child_cl;
- 	struct net_device *dev = qdisc_dev(sch);
- 	struct Qdisc *root_qdisc = dev->qdisc;
-+	unsigned int i;
-+	int err;
- 
- 	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
- 
-@@ -852,11 +859,8 @@ static int ceetm_init_prio(struct Qdisc
- 	/* Create and configure qcount child classes */
- 	for (i = 0; i < priv->prio.qcount; i++) {
- 		child_cl = kzalloc(sizeof(*child_cl), GFP_KERNEL);
--		if (!child_cl) {
--			pr_err(KBUILD_BASENAME " : %s : kzalloc() failed\n",
--			       __func__);
-+		if (!child_cl)
- 			return -ENOMEM;
--		}
- 
- 		child_cl->prio.cstats = alloc_percpu(struct ceetm_class_stats);
- 		if (!child_cl->prio.cstats) {
-@@ -906,12 +910,12 @@ err_init_prio_cls:
- static int ceetm_init_wbfs(struct Qdisc *sch, struct ceetm_qdisc *priv,
- 			   struct tc_ceetm_qopt *qopt)
- {
--	int err, group_b, small_group;
--	unsigned int i, id, prio_a, prio_b;
- 	struct ceetm_class *parent_cl, *child_cl, *tmp_cl, *root_cl = NULL;
- 	struct Qdisc *root_qdisc, *parent_qdisc = NULL;
--	struct ceetm_qdisc *root_priv;
- 	struct net_device *dev = qdisc_dev(sch);
-+	unsigned int i, id, prio_a, prio_b;
-+	int err, group_b, small_group;
-+	struct ceetm_qdisc *root_priv;
- 
- 	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
- 
-@@ -1070,11 +1074,8 @@ static int ceetm_init_wbfs(struct Qdisc
- 	/* Create qcount child classes */
- 	for (i = 0; i < priv->wbfs.qcount; i++) {
- 		child_cl = kzalloc(sizeof(*child_cl), GFP_KERNEL);
--		if (!child_cl) {
--			pr_err(KBUILD_BASENAME " : %s : kzalloc() failed\n",
--			       __func__);
-+		if (!child_cl)
- 			return -ENOMEM;
--		}
- 
- 		child_cl->wbfs.cstats = alloc_percpu(struct ceetm_class_stats);
- 		if (!child_cl->wbfs.cstats) {
-@@ -1138,11 +1139,11 @@ err_init_wbfs_cls:
- static int ceetm_init(struct Qdisc *sch, struct nlattr *opt,
- 		      struct netlink_ext_ack *extack)
- {
--	struct tc_ceetm_qopt *qopt;
--	struct nlattr *tb[TCA_CEETM_QOPS + 1];
--	int ret;
- 	struct ceetm_qdisc *priv = qdisc_priv(sch);
- 	struct net_device *dev = qdisc_dev(sch);
-+	struct nlattr *tb[TCA_CEETM_QOPS + 1];
-+	struct tc_ceetm_qopt *qopt;
-+	int ret;
- 
- 	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
- 
-@@ -1158,7 +1159,8 @@ static int ceetm_init(struct Qdisc *sch,
- 	if (ret)
- 		return ret;
- 
--	ret = nla_parse_nested_deprecated(tb, TCA_CEETM_QOPS, opt, ceetm_policy, NULL);
-+	ret = nla_parse_nested_deprecated(tb, TCA_CEETM_QOPS, opt,
-+					  ceetm_policy, NULL);
- 	if (ret < 0) {
- 		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
- 		return ret;
-@@ -1265,8 +1267,8 @@ change_err:
- static int ceetm_change_wbfs(struct Qdisc *sch, struct ceetm_qdisc *priv,
- 			     struct tc_ceetm_qopt *qopt)
- {
--	int err;
- 	bool group_b;
-+	int err;
- 
- 	if (qopt->qcount) {
- 		pr_err("CEETM: the qcount can not be modified\n");
-@@ -1324,15 +1326,16 @@ change_err:
- static int ceetm_change(struct Qdisc *sch, struct nlattr *opt,
- 			struct netlink_ext_ack *extack)
- {
--	struct tc_ceetm_qopt *qopt;
--	struct nlattr *tb[TCA_CEETM_QOPS + 1];
--	int ret;
- 	struct ceetm_qdisc *priv = qdisc_priv(sch);
- 	struct net_device *dev = qdisc_dev(sch);
-+	struct nlattr *tb[TCA_CEETM_QOPS + 1];
-+	struct tc_ceetm_qopt *qopt;
-+	int ret;
- 
- 	pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle);
- 
--	ret = nla_parse_nested_deprecated(tb, TCA_CEETM_QOPS, opt, ceetm_policy, NULL);
-+	ret = nla_parse_nested_deprecated(tb, TCA_CEETM_QOPS, opt,
-+					  ceetm_policy, NULL);
- 	if (ret < 0) {
- 		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
- 		return ret;
-@@ -1381,8 +1384,8 @@ static int ceetm_change(struct Qdisc *sc
-  */
- static void ceetm_attach(struct Qdisc *sch)
- {
--	struct net_device *dev = qdisc_dev(sch);
- 	struct ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct net_device *dev = qdisc_dev(sch);
- 	struct Qdisc *qdisc, *old_qdisc;
- 	unsigned int i;
- 
-@@ -1461,8 +1464,8 @@ static int ceetm_cls_change_prio(struct
- 	}
- 
- 	if (cl->prio.cr != (bool)copt->cr) {
--		err = qman_ceetm_channel_set_cq_cr_eligibility(
--						cl->prio.cq->parent,
-+		err = qman_ceetm_channel_set_cq_cr_eligibility
-+						(cl->prio.cq->parent,
- 						cl->prio.cq->idx,
- 						copt->cr);
- 		if (err)
-@@ -1471,8 +1474,8 @@ static int ceetm_cls_change_prio(struct
- 	}
- 
- 	if (cl->prio.er != (bool)copt->er) {
--		err = qman_ceetm_channel_set_cq_er_eligibility(
--						cl->prio.cq->parent,
-+		err = qman_ceetm_channel_set_cq_er_eligibility
-+						(cl->prio.cq->parent,
- 						cl->prio.cq->idx,
- 						copt->er);
- 		if (err)
-@@ -1517,15 +1520,15 @@ static int ceetm_cls_change(struct Qdisc
- 			    struct nlattr **tca, unsigned long *arg,
- 			    struct netlink_ext_ack *extack)
- {
--	int err;
--	u64 bps;
--	struct ceetm_qdisc *priv;
- 	struct ceetm_class *cl = (struct ceetm_class *)*arg;
-+	struct net_device *dev = qdisc_dev(sch);
- 	struct nlattr *opt = tca[TCA_OPTIONS];
- 	struct nlattr *tb[__TCA_CEETM_MAX];
--	struct tc_ceetm_copt *copt;
- 	struct qm_ceetm_channel *channel;
--	struct net_device *dev = qdisc_dev(sch);
-+	struct tc_ceetm_copt *copt;
-+	struct ceetm_qdisc *priv;
-+	int err;
-+	u64 bps;
- 
- 	pr_debug(KBUILD_BASENAME " : %s : classid %X under qdisc %X\n",
- 		 __func__, classid, sch->handle);
-@@ -1552,7 +1555,8 @@ static int ceetm_cls_change(struct Qdisc
- 		return -EINVAL;
- 	}
- 
--	err = nla_parse_nested_deprecated(tb, TCA_CEETM_COPT, opt, ceetm_policy, NULL);
-+	err = nla_parse_nested_deprecated(tb, TCA_CEETM_COPT, opt,
-+					  ceetm_policy, NULL);
- 	if (err < 0) {
- 		pr_err(KBUILD_BASENAME " : %s : tc error\n", __func__);
- 		return -EINVAL;
-@@ -1714,8 +1718,8 @@ static int ceetm_cls_dump(struct Qdisc *
- 			  struct sk_buff *skb, struct tcmsg *tcm)
- {
- 	struct ceetm_class *cl = (struct ceetm_class *)arg;
--	struct nlattr *nest;
- 	struct tc_ceetm_copt copt;
-+	struct nlattr *nest;
- 
- 	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n",
- 		 __func__, cl->common.classid, sch->handle);
-@@ -1770,8 +1774,8 @@ nla_put_failure:
- 
- static int ceetm_cls_delete(struct Qdisc *sch, unsigned long arg)
- {
--	struct ceetm_qdisc *priv = qdisc_priv(sch);
- 	struct ceetm_class *cl = (struct ceetm_class *)arg;
-+	struct ceetm_qdisc *priv = qdisc_priv(sch);
- 
- 	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n",
- 		 __func__, cl->common.classid, sch->handle);
-@@ -1818,12 +1822,12 @@ static int ceetm_cls_graft(struct Qdisc
- static int ceetm_cls_dump_stats(struct Qdisc *sch, unsigned long arg,
- 				struct gnet_dump *d)
- {
--	unsigned int i;
- 	struct ceetm_class *cl = (struct ceetm_class *)arg;
- 	struct gnet_stats_basic_packed tmp_bstats;
- 	struct ceetm_class_stats *cstats = NULL;
- 	struct qm_ceetm_cq *cq = NULL;
- 	struct tc_ceetm_xstats xstats;
-+	unsigned int i;
- 
- 	memset(&xstats, 0, sizeof(xstats));
- 	memset(&tmp_bstats, 0, sizeof(tmp_bstats));
-@@ -1872,9 +1876,11 @@ static int ceetm_cls_dump_stats(struct Q
- static struct tcf_block *ceetm_tcf_block(struct Qdisc *sch, unsigned long arg,
- 					 struct netlink_ext_ack *extack)
- {
--	struct ceetm_qdisc *priv = qdisc_priv(sch);
- 	struct ceetm_class *cl = (struct ceetm_class *)arg;
--	struct tcf_block *block = cl ? cl->block : priv->block;
-+	struct ceetm_qdisc *priv = qdisc_priv(sch);
-+	struct tcf_block *block;
-+
-+	block = cl ? cl->block : priv->block;
- 
- 	pr_debug(KBUILD_BASENAME " : %s : class %X under qdisc %X\n", __func__,
- 		 cl ? cl->common.classid : 0, sch->handle);
-@@ -1945,6 +1951,7 @@ static struct ceetm_class *ceetm_classif
- 		case TC_ACT_STOLEN:
- 		case TC_ACT_TRAP:
- 			*qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
-+			/* fall through */
- 		case TC_ACT_SHOT:
- 			/* No valid class found due to action */
- 			*act_drop = true;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0366-LF-697-net-ethernet-freescale-sdk_fman-fix-the-build.patch b/target/linux/layerscape/patches-5.4/701-net-0366-LF-697-net-ethernet-freescale-sdk_fman-fix-the-build.patch
deleted file mode 100644
index 9c38b485f5..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0366-LF-697-net-ethernet-freescale-sdk_fman-fix-the-build.patch
+++ /dev/null
@@ -1,280 +0,0 @@
-From 43be5f0f6c36e23d6f51c1f1f55ebcec920cc453 Mon Sep 17 00:00:00 2001
-From: Jason Liu <jason.hui.liu@nxp.com>
-Date: Thu, 2 Jan 2020 12:46:37 +0800
-Subject: [PATCH] LF-697 net: ethernet: freescale: sdk_fman: fix the build
- warnings
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The patch fixes the build warnings by adding the comments 'fall through' to avoid the build warnings
-The patch also initializes the value pgid_val to avoid the warning: ‘pgid_val’ may be used uninitialized
-The patch should not and will not have any function impact.
-
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_cc.c: In function ‘ValidateNextEngineParams’:
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_cc.c:1681:51: warning: this statement may fall through [-Wimplicit-fallthrough=]
-In file included from drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.c:40:
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.c: In function ‘GetGenHdrCode’:
-drivers/net/ethernet/freescale/sdk_fman/inc/error_ext.h:446:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
-In file included from drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.c:40:
-drivers/net/ethernet/freescale/sdk_fman/inc/error_ext.h:446:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.c:255:13: note: here
-  255 |             case (HEADER_TYPE_ETH):
-      |             ^~~~
-In file included from drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.c:40:
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.c:278:13: note: here
-  278 |             case (HEADER_TYPE_MINENCAP):
-      |             ^~~~
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_manip.c: In function ‘BuildHmct’:
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_manip.c:673:32: warning: this statement may fall through [-Wimplicit-fallthrough=]
-  673 |                         tmpReg = HMCD_INSRT_UDP_LITE;
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_manip.c:674:21: note: here
-  674 |                     case (e_FM_PCD_MANIP_INSRT_BY_HDR_UDP):
-      |                     ^~~~
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c: In function ‘FM_PORT_Config’:
-arch/arm64/include/asm/io.h:36:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
-   36 | #define __raw_writel __raw_writel
-drivers/net/ethernet/freescale/sdk_fman/src/inc/types_linux.h:99:25: note: in expansion of macro ‘__raw_writel’
-   99 | #define out_be32(a, v)  __raw_writel(__cpu_to_be32(v), a)
-      |                         ^~~~~~~~~~~~
-drivers/net/ethernet/freescale/sdk_fman/src/inc/types_linux.h:121:37: note: in expansion of macro ‘out_be32’
-  121 | #define WRITE_UINT32(arg, data)     out_be32(&(arg), data)//*(volatile unsigned int *)(&(arg)) = (data)
-      |                                     ^~~~~~~~
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c:2404:13: note: in expansion of macro ‘WRITE_UINT32’
- 2404 |             WRITE_UINT32( p_FmPort->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tfp,
-      |             ^~~~~~~~~~~~
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c:2407:9: note: here
- 2407 |         case (e_FM_PORT_TYPE_TX_10G):
-      |         ^~~~
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c:2435:60: warning: this statement may fall through [-Wimplicit-fallthrough=]
- 2435 |             p_FmPort->p_FmPortDriverParam->noScatherGather =
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c:2438:9: note: here
- 2438 |         case (e_FM_PORT_TYPE_OH_HOST_COMMAND):
-      |         ^~~~
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c: In function ‘FM_PORT_ModifyCounter’:
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c:4268:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
- 4268 |             if ((p_FmPort->portType == e_FM_PORT_TYPE_RX)
-      |                ^
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c:4273:9: note: here
- 4273 |         case (e_FM_PORT_COUNTERS_ENQ_TOTAL):
-      |         ^~~~
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c: In function ‘SetPcd’:
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c:1396:24: warning: this statement may fall through [-Wimplicit-fallthrough=]
- 1396 |                 tmpReg = NIA_KG_CC_EN;
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c:1397:13: note: here
- 1397 |             case (e_FM_PORT_PCD_SUPPORT_PRS_AND_KG):
-      |             ^~~~
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm.c: In function ‘FM_GetCounter’:
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm.c:4804:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
- 4804 |             if ((p_Fm->p_FmStateStruct->revInfo.majorRev == 4) ||
-      |                ^
-drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm.c:4810:9: note: here
- 4810 |         case (e_FM_COUNTERS_ENQ_TOTAL_FRAME):
-      |         ^~~~
-drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs_fm.c: In function ‘fm_get_counter’:
-drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs_fm.c:1803:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
- 1803 |   if (p_fm->p_FmStateStruct->revInfo.majorRev >= 6)
-      |      ^
-drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs_fm.c:1806:2: note: here
- 1806 |  case (e_FM_COUNTERS_ENQ_TOTAL_FRAME):
-      |  ^~~~
-drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.c: In function ‘compat_copy_fm_pcd_cc_next_engine’:
-drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.c:378:33: warning: this statement may fall through [-Wimplicit-fallthrough=]
-  378 |                 param->manip_id = compat_pcd_id2ptr(compat_param->manip_id);
-      |                 ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.c:379:13: note: here
-  379 |             default:
-      |             ^~~~~~~
-drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.c:405:40: warning: this statement may fall through [-Wimplicit-fallthrough=]
-  405 |                 compat_param->manip_id = compat_pcd_ptr2id(param->manip_id);
-      |                 ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.c:406:13: note: here
-  406 |             default:
-      |             ^~~~~~~
-In file included from drivers/net/ethernet/mscc/ocelot.h:21,
-                 from drivers/net/ethernet/mscc/ocelot_tsn.c:12:
-drivers/net/ethernet/mscc/ocelot_tsn.c: In function ‘ocelot_seq_gen_set’:
-include/soc/mscc/ocelot.h:499:48: warning: ‘pgid_val’ may be used uninitialized in this function [-Wmaybe-uninitialized]
-  499 | #define ocelot_write_rix(ocelot, val, reg, ri) __ocelot_write_ix(ocelot, val, reg, reg##_RSZ * (ri))
-      |                                                ^~~~~~~~~~~~~~~~~
-drivers/net/ethernet/mscc/ocelot_tsn.c:755:5: note: ‘pgid_val’ was declared here
-  755 |  u8 pgid_val, fwdport;
-
-Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
-Cc: Madalin Bucur <madalin.bucur@nxp.com>
-Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_cc.c   | 1 +
- drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.c   | 4 ++++
- .../net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_manip.c    | 1 +
- .../net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c    | 5 +++++
- drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm.c          | 3 +++
- .../freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.c         | 2 ++
- .../net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs_fm.c    | 3 +++
- drivers/net/ethernet/mscc/ocelot_tsn.c                               | 2 +-
- 8 files changed, 20 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_cc.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_cc.c
-@@ -1679,6 +1679,7 @@ t_Error ValidateNextEngineParams(
- 
-         case (e_FM_PCD_HASH):
-             p_FmPcdCcNextEngineParams->nextEngine = e_FM_PCD_CC;
-+            /* fall through */
-         case (e_FM_PCD_CC):
-             if (!p_FmPcdCcNextEngineParams->params.ccParams.h_CcNode)
-                 RETURN_ERROR(MAJOR, E_NULL_POINTER,
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.c
-@@ -198,6 +198,7 @@ static uint8_t GetGenHdrCode(e_NetHeader
-         {
-             case (HEADER_TYPE_NONE):
-                 ASSERT_COND(FALSE);
-+		/* Else fall through */
-             case (HEADER_TYPE_ETH):
-                 return KG_SCH_GEN_ETH;
-             case (HEADER_TYPE_LLC_SNAP):
-@@ -252,6 +253,7 @@ static uint8_t GetGenHdrCode(e_NetHeader
-         {
-             case (HEADER_TYPE_NONE):
-                 ASSERT_COND(FALSE);
-+		/* Else fall through */
-             case (HEADER_TYPE_ETH):
-                 return KG_SCH_GEN_ETH_NO_V;
-             case (HEADER_TYPE_LLC_SNAP):
-@@ -269,12 +271,14 @@ static uint8_t GetGenHdrCode(e_NetHeader
-                     REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal MPLS header index"));
-                 return 0;
-             case (HEADER_TYPE_IPv4):
-+		/* fall through */
-             case (HEADER_TYPE_IPv6):
-                 if ((hdrIndex == e_FM_PCD_HDR_INDEX_NONE) || (hdrIndex == e_FM_PCD_HDR_INDEX_1))
-                     return KG_SCH_GEN_L3_NO_V;
-                 if ((hdrIndex == e_FM_PCD_HDR_INDEX_2) || (hdrIndex == e_FM_PCD_HDR_INDEX_LAST))
-                     return KG_SCH_GEN_IP2_NO_V;
-                 REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Illegal IP header index"));
-+		/* fall through */
-             case (HEADER_TYPE_MINENCAP):
-                 return KG_SCH_GEN_IP2_NO_V;
-             case (HEADER_TYPE_USER_DEFINED_L3):
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_manip.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Pcd/fm_manip.c
-@@ -671,6 +671,7 @@ static t_Error BuildHmct(t_FmPcdManip *p
-                         break;
-                     case (e_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE):
-                         tmpReg = HMCD_INSRT_UDP_LITE;
-+			/* fall through */
-                     case (e_FM_PCD_MANIP_INSRT_BY_HDR_UDP):
-                         tmpReg |= (uint32_t)(HMCD_OPCODE_UDP_INSRT)
-                                 << HMCD_OC_SHIFT;
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c
-@@ -1394,6 +1394,7 @@ static t_Error SetPcd(t_FmPort *p_FmPort
-             case (e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC):
-             case (e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR):
-                 tmpReg = NIA_KG_CC_EN;
-+                /* fall through */
-             case (e_FM_PORT_PCD_SUPPORT_PRS_AND_KG):
-             case (e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR):
-                 if (p_PcdParams->p_KgParams->directScheme)
-@@ -2404,6 +2405,8 @@ t_Handle FM_PORT_Config(t_FmPortParams *
-             WRITE_UINT32( p_FmPort->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tfp,
-                          tmpReg);
- #endif /* FM_WRONG_RESET_VALUES_ERRATA_FMAN_A005127 */
-+
-+            /* fall through */
-         case (e_FM_PORT_TYPE_TX_10G):
-                 tmpReg =
-                         GET_UINT32(p_FmPort->p_FmPortBmiRegs->txPortBmiRegs.fmbm_tfp);
-@@ -2435,6 +2438,7 @@ t_Handle FM_PORT_Config(t_FmPortParams *
-             p_FmPort->p_FmPortDriverParam->noScatherGather =
-                     DEFAULT_PORT_noScatherGather;
- #endif /* (DPAA_VERSION >= 11) */
-+            /* fall through */
-         case (e_FM_PORT_TYPE_OH_HOST_COMMAND):
-             p_FmPort->p_FmPortDriverParam->deqPrefetchOption =
-                     DEFAULT_PORT_deqPrefetchOption_HC;
-@@ -4270,6 +4274,7 @@ t_Error FM_PORT_ModifyCounter(t_Handle h
-                 RETURN_ERROR(
-                         MINOR, E_INVALID_STATE,
-                         ("Requested counter is not available for Rx ports"));
-+            /* fall through */
-         case (e_FM_PORT_COUNTERS_ENQ_TOTAL):
-             bmiCounter = FALSE;
-             break;
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm.c
-@@ -4800,6 +4800,7 @@ uint32_t FM_GetCounter(t_Handle h_Fm, e_
-     {
-         case (e_FM_COUNTERS_DEQ_1):
-         case (e_FM_COUNTERS_DEQ_2):
-+            /* fall through */
-         case (e_FM_COUNTERS_DEQ_3):
-             if ((p_Fm->p_FmStateStruct->revInfo.majorRev == 4) ||
-                 (p_Fm->p_FmStateStruct->revInfo.majorRev >= 6))
-@@ -4807,12 +4808,14 @@ uint32_t FM_GetCounter(t_Handle h_Fm, e_
-                 REPORT_ERROR(MAJOR, E_NOT_SUPPORTED, ("Requested counter not supported"));
-                 return 0;
-             }
-+            /* fall through */
-         case (e_FM_COUNTERS_ENQ_TOTAL_FRAME):
-         case (e_FM_COUNTERS_DEQ_TOTAL_FRAME):
-         case (e_FM_COUNTERS_DEQ_0):
-         case (e_FM_COUNTERS_DEQ_FROM_DEFAULT):
-         case (e_FM_COUNTERS_DEQ_FROM_CONTEXT):
-         case (e_FM_COUNTERS_DEQ_FROM_FD):
-+            /* fall through */
-         case (e_FM_COUNTERS_DEQ_CONFIRM):
-             if (!(GET_UINT32(p_Fm->p_FmQmiRegs->fmqm_gc) & QMI_CFG_EN_COUNTERS))
-             {
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.c
-@@ -376,6 +376,7 @@ static inline void compat_copy_fm_pcd_cc
-             case e_IOC_FM_PCD_DONE:
-             case e_IOC_FM_PCD_PLCR:
-                 param->manip_id = compat_pcd_id2ptr(compat_param->manip_id);
-+		/* fall through */
-             default:
-                 memcpy(&param->params, &compat_param->params, sizeof(param->params));
-         }
-@@ -403,6 +404,7 @@ static inline void compat_copy_fm_pcd_cc
-             case e_IOC_FM_PCD_DONE:
-             case e_IOC_FM_PCD_PLCR:
-                 compat_param->manip_id = compat_pcd_ptr2id(param->manip_id);
-+		/* fall through */
-             default:
-                 memcpy(&compat_param->params, &param->params, sizeof(compat_param->params));
-         }
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs_fm.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_sysfs_fm.c
-@@ -1799,16 +1799,19 @@ int fm_get_counter(void *h_fm, e_FmCount
- 	switch (cnt_e) {
- 	case (e_FM_COUNTERS_DEQ_1):
- 	case (e_FM_COUNTERS_DEQ_2):
-+		/* fall through */
- 	case (e_FM_COUNTERS_DEQ_3):
- 		if (p_fm->p_FmStateStruct->revInfo.majorRev >= 6)
- 			return -EINVAL; /* counter not available */
- 
-+		/* Else fall through */
- 	case (e_FM_COUNTERS_ENQ_TOTAL_FRAME):
- 	case (e_FM_COUNTERS_DEQ_TOTAL_FRAME):
- 	case (e_FM_COUNTERS_DEQ_0):
- 	case (e_FM_COUNTERS_DEQ_FROM_DEFAULT):
- 	case (e_FM_COUNTERS_DEQ_FROM_CONTEXT):
- 	case (e_FM_COUNTERS_DEQ_FROM_FD):
-+		/* fall through */
- 	case (e_FM_COUNTERS_DEQ_CONFIRM):
- 		if (!(ioread32be(&p_fm->p_FmQmiRegs->fmqm_gc) &
- 			QMI_CFG_EN_COUNTERS))
---- a/drivers/net/ethernet/mscc/ocelot_tsn.c
-+++ b/drivers/net/ethernet/mscc/ocelot_tsn.c
-@@ -752,7 +752,7 @@ static int streamid_multi_forward_set(st
- 	u32 bucket;
- 	u32 val;
- 	int m, n, i;
--	u8 pgid_val, fwdport;
-+	u8 pgid_val = 0, fwdport;
- 	u32 dst_idx;
- 
- 	m_index = index / 4;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0367-net-mscc-ocelot-Workaround-to-allow-traffic-to-CPU-i.patch b/target/linux/layerscape/patches-5.4/701-net-0367-net-mscc-ocelot-Workaround-to-allow-traffic-to-CPU-i.patch
deleted file mode 100644
index 8d10202ac9..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0367-net-mscc-ocelot-Workaround-to-allow-traffic-to-CPU-i.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From 937bf9496489cb4b491e75fe4436348bf3454dcd Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Sat, 21 Dec 2019 23:19:20 +0200
-Subject: [PATCH] net: mscc: ocelot: Workaround to allow traffic to CPU in
- standalone mode
-
-The Ocelot switches have what is, in my opinion, a design flaw: their
-DSA header is in front of the Ethernet header, which means that they
-subvert the DSA master's RX filter, which for all practical purposes,
-either needs to be in promiscuous mode, or the OCELOT_TAG_PREFIX_LONG
-needs to be used for extraction, which makes the switch add a fake DMAC
-of ff:ff:ff:ff:ff:ff so that the DSA master accepts the frame.
-
-The issue with this design, of course, is that the CPU will be spammed
-with frames that it doesn't want to respond to, and there isn't any
-hardware offload in place by default to drop them.
-
-What is being done in the VSC7514 Ocelot driver is a process of
-selective whitelisting. The "MAC address" of each Ocelot switch net
-device, with all VLANs installed on that port, is being added as a FDB
-entry towards PGID_CPU.
-
-Some background first: Port Group IDs (PGIDs) are masks of destination
-ports. The switch performs 3 lookups in the PGID table for each frame,
-and forwards the frame to the ports that are present in the logical AND
-of all 3 PGIDs (for the most part, see below).
-
-The first PGID lookup is for the destination masks and the PGID table is
-indexed by the DEST_IDX field from the MAC table (FDB).
-The PGID can be an unicast set: PGIDs 0-11 are the per-port PGIDs, and
-by convention PGID i has only BIT(i) set, aka only this port is set in
-the destination mask.
-Or the PGID can be a multicast set: PGIDs 12-63 can (again, still by
-convention) hold a richer destination mask comprised of multiple ports.
-
-[ Ignoring the second PGID lookup, for aggregation, since it doesn't
-  interfere. ]
-
-The third PGID lookup is for source masks: PGID entries 80-91 answer the
-question: is port i allowed to forward traffic to port j? If yes, then
-BIT(j) of PGID 80+i will be found set.
-
-What is interesting about the CPU port in this whole story is that, in
-the way the driver sets up the PGIDs, its bit isn't set in any source
-mask PGID of any other port (therefore, the third lookup would always
-decide to exclude the CPU port from this list). So frames are never
-_forwarded_ to the CPU.
-
-There is a loophole in this PGID mechanism which is described in the
-VSC7514 manual:
-
-	If an entry is found in the MAC table entry of ENTRY_TYPE 0 or 1
-	and the CPU port is set in the PGID pointed to by the MAC table
-	entry, CPU extraction queue PGID.DST_PGID is added to the CPUQ.
-
-In other words, the CPU port is special, and frames are "copied" to the
-CPU, disregarding the source masks (third PGID lookup), if BIT(cpu) is
-found to be set in the destination masks (first PGID lookup).
-
-Now back to the story: what is PGID_CPU? It is a multicast set
-containing only BIT(cpu). I don't know why it was chosen to be a
-multicast PGID (59) and not simply the unicast one of this port, but it
-doesn't matter.
-
-The point is that frames that match the FDB will go to PGID_CPU by
-virtue of the DEST_IDX from the respective MAC table entry, and frames
-that don't will go to PGID_UC or PGID_MC, by virtue of the FLD_UNICAST,
-FLD_BROADCAST etc settings for flooding. And that is where the
-distinction is made: flooded frames will be subject to the third PGID
-lookup, while frames that are whitelisted to the PGID_CPU by the MAC
-table aren't.
-
-So we can use this mechanism to simulate an RX filter, given that we are
-subverting the DSA master's implicit one, as mentioned in the first
-paragraph. But this has some limitations:
-
-- In Ocelot each net device has its own MAC address. When simulating
-  this with MAC table entries, it will practically result in having N
-  MAC addresses for each of the N front-panel ports (because FDB entries
-  are not per source port). A bit strange, I think.
-
-- In DSA we don't have the infrastructure in place to support this
-  whitelisting mechanism. Calling .port_fdb_add on the CPU port for each
-  slave net device dev_addr isn't, in itself, hard. The problem is with
-  the VLANs that this port is part of. We would need to keep a duplicate
-  list of the VLANs from the bridge, plus the ones added from 8021q, for
-  each port. And we would need reference counting on each MAC address,
-  such that when a front-panel port changes its MAC address and we need
-  to delete the old FDB entry, we don't actually delete it if the other
-  front-panel ports are still using it. Not to mention that this FDB
-  entry would have to be added on the whole net of upstream DSA switches.
-
-So... it's complicated. What this patch does is to simply allow frames
-to be flooded to the CPU, which is anyway what the Ocelot driver is
-doing after removing the bridge from the net devices, see this snippet
-from ocelot_bridge_stp_state_set:
-
-	/* Apply FWD mask. The loop is needed to add/remove the current port as
-	 * a source for the other ports.
-	 */
-	for (p = 0; p < ocelot->num_phys_ports; p++) {
-		if (p == ocelot->cpu || (ocelot->bridge_fwd_mask & BIT(p))) {
-			(...)
-		} else {
-			/* Only the CPU port, this is compatible with link
-			 * aggregation.
-			 */
-			ocelot_write_rix(ocelot,
-					 BIT(ocelot->cpu),
-					 ANA_PGID_PGID, PGID_SRC + p);
-		}
-
-Otherwise said, the ocelot driver itself is already not self-coherent,
-since immediately after probe time, and immediately after removal from a
-bridge, it behaves in different ways, although the front panel ports are
-standalone in both cases.
-
-While standalone traffic _does_ work for the Felix DSA wrapper after
-enslaving and removing the ports from a bridge, this patch makes
-standalone traffic work at probe time too, with the caveat that even
-irrelevant frames will get processed by software, making it more
-susceptible to denial of service.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- drivers/net/ethernet/mscc/ocelot.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -2291,6 +2291,18 @@ void ocelot_set_cpu_port(struct ocelot *
- 			 enum ocelot_tag_prefix injection,
- 			 enum ocelot_tag_prefix extraction)
- {
-+	int port;
-+
-+	for (port = 0; port < ocelot->num_phys_ports; port++) {
-+		/* Disable old CPU port and enable new one */
-+		ocelot_rmw_rix(ocelot, 0, BIT(ocelot->cpu),
-+			       ANA_PGID_PGID, PGID_SRC + port);
-+		if (port == cpu)
-+			continue;
-+		ocelot_rmw_rix(ocelot, BIT(cpu), BIT(cpu),
-+			       ANA_PGID_PGID, PGID_SRC + port);
-+	}
-+
- 	/* Configure and enable the CPU port. */
- 	ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, cpu);
- 	ocelot_write_rix(ocelot, BIT(cpu), ANA_PGID_PGID, PGID_CPU);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0377-net-dsa-ocelot-add-NET_VENDOR_MICROSEMI-dependency.patch b/target/linux/layerscape/patches-5.4/701-net-0377-net-dsa-ocelot-add-NET_VENDOR_MICROSEMI-dependency.patch
deleted file mode 100644
index 81db669882..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0377-net-dsa-ocelot-add-NET_VENDOR_MICROSEMI-dependency.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From ac2fb1a9879204825467eed7a138a3d77c1ecfe8 Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Mon, 16 Dec 2019 00:12:14 +0200
-Subject: [PATCH] net: dsa: ocelot: add NET_VENDOR_MICROSEMI dependency
-
-Selecting MSCC_OCELOT_SWITCH is not possible when NET_VENDOR_MICROSEMI
-is disabled:
-
-WARNING: unmet direct dependencies detected for MSCC_OCELOT_SWITCH
-  Depends on [n]: NETDEVICES [=y] && ETHERNET [=n] && NET_VENDOR_MICROSEMI [=n] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y]
-  Selected by [m]:
-  - NET_DSA_MSCC_FELIX [=m] && NETDEVICES [=y] && HAVE_NET_DSA [=y] && NET_DSA [=y] && PCI [=y]
-
-Add a Kconfig dependency on NET_VENDOR_MICROSEMI, which also implies
-CONFIG_NETDEVICES.
-
-Depending on a vendor config violates menuconfig locality for the DSA
-driver, but is the smallest compromise since all other solutions are
-much more complicated (see [0]).
-
-https://www.spinics.net/lists/netdev/msg618808.html
-
-Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Mao Wenan <maowenan@huawei.com>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/ocelot/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/dsa/ocelot/Kconfig
-+++ b/drivers/net/dsa/ocelot/Kconfig
-@@ -2,6 +2,7 @@
- config NET_DSA_MSCC_FELIX
- 	tristate "Ocelot / Felix Ethernet switch support"
- 	depends on NET_DSA && PCI
-+	depends on NET_VENDOR_MICROSEMI
- 	select MSCC_OCELOT_SWITCH
- 	select NET_DSA_TAG_OCELOT
- 	help
diff --git a/target/linux/layerscape/patches-5.4/701-net-0378-mii-Add-helpers-for-parsing-SGMII-auto-negotiation.patch b/target/linux/layerscape/patches-5.4/701-net-0378-mii-Add-helpers-for-parsing-SGMII-auto-negotiation.patch
deleted file mode 100644
index 3aeda2a057..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0378-mii-Add-helpers-for-parsing-SGMII-auto-negotiation.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-From 4f3ba90c37ec5aedd2227beb013bab59035fbb57 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Mon, 30 Sep 2019 19:20:26 +0300
-Subject: [PATCH] mii: Add helpers for parsing SGMII auto-negotiation
-
-Typically a MAC PCS auto-configures itself after it receives the
-negotiated copper-side link settings from the PHY, but some MAC devices
-are more special and need manual interpretation of the SGMII AN result.
-
-In other cases, the PCS exposes the entire tx_config_reg base page as it
-is transmitted on the wire during auto-negotiation, so it makes sense to
-be able to decode the equivalent lp_advertised bit mask from the raw u16
-(of course, "lp" considering the PCS to be the local PHY).
-
-Therefore, add the bit definitions for the SGMII registers 4 and 5
-(local device ability, link partner ability), as well as a link_mode
-conversion helper that can be used to feed the AN results into
-phy_resolve_aneg_linkmode.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- include/linux/mii.h      | 50 ++++++++++++++++++++++++++++++++++++++++++++++++
- include/uapi/linux/mii.h | 12 ++++++++++++
- 2 files changed, 62 insertions(+)
-
---- a/include/linux/mii.h
-+++ b/include/linux/mii.h
-@@ -373,6 +373,56 @@ static inline u32 mii_lpa_to_ethtool_lpa
- }
- 
- /**
-+ * mii_lpa_mod_linkmode_adv_sgmii
-+ * @lp_advertising: pointer to destination link mode.
-+ * @lpa: value of the MII_LPA register
-+ *
-+ * A small helper function that translates MII_LPA bits to
-+ * linkmode advertisement settings for SGMII.
-+ * Leaves other bits unchanged.
-+ */
-+static inline void
-+mii_lpa_mod_linkmode_lpa_sgmii(unsigned long *lp_advertising, u32 lpa)
-+{
-+	u32 speed_duplex = lpa & LPA_SGMII_DPX_SPD_MASK;
-+
-+	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, lp_advertising,
-+			 speed_duplex == LPA_SGMII_1000HALF);
-+
-+	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, lp_advertising,
-+			 speed_duplex == LPA_SGMII_1000FULL);
-+
-+	linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, lp_advertising,
-+			 speed_duplex == LPA_SGMII_100HALF);
-+
-+	linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, lp_advertising,
-+			 speed_duplex == LPA_SGMII_100FULL);
-+
-+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, lp_advertising,
-+			 speed_duplex == LPA_SGMII_10HALF);
-+
-+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, lp_advertising,
-+			 speed_duplex == LPA_SGMII_10FULL);
-+}
-+
-+/**
-+ * mii_lpa_to_linkmode_adv_sgmii
-+ * @advertising: pointer to destination link mode.
-+ * @lpa: value of the MII_LPA register
-+ *
-+ * A small helper function that translates MII_ADVERTISE bits
-+ * to linkmode advertisement settings when in SGMII mode.
-+ * Clears the old value of advertising.
-+ */
-+static inline void mii_lpa_to_linkmode_lpa_sgmii(unsigned long *lp_advertising,
-+						 u32 lpa)
-+{
-+	linkmode_zero(lp_advertising);
-+
-+	mii_lpa_mod_linkmode_lpa_sgmii(lp_advertising, lpa);
-+}
-+
-+/**
-  * mii_adv_mod_linkmode_adv_t
-  * @advertising:pointer to destination link mode.
-  * @adv: value of the MII_ADVERTISE register
---- a/include/uapi/linux/mii.h
-+++ b/include/uapi/linux/mii.h
-@@ -131,6 +131,18 @@
- #define NWAYTEST_LOOPBACK	0x0100	/* Enable loopback for N-way   */
- #define NWAYTEST_RESV2		0xfe00	/* Unused...                   */
- 
-+/* MAC and PHY tx_config_Reg[15:0] for SGMII in-band auto-negotiation.*/
-+#define ADVERTISE_SGMII		0x0001	/* MAC can do SGMII            */
-+#define LPA_SGMII		0x0001	/* PHY can do SGMII            */
-+#define LPA_SGMII_DPX_SPD_MASK	0x1C00	/* SGMII duplex and speed bits */
-+#define LPA_SGMII_10HALF	0x0000	/* Can do 10mbps half-duplex   */
-+#define LPA_SGMII_10FULL	0x1000	/* Can do 10mbps full-duplex   */
-+#define LPA_SGMII_100HALF	0x0400	/* Can do 100mbps half-duplex  */
-+#define LPA_SGMII_100FULL	0x1400	/* Can do 100mbps full-duplex  */
-+#define LPA_SGMII_1000HALF	0x0800	/* Can do 1000mbps half-duplex */
-+#define LPA_SGMII_1000FULL	0x1800	/* Can do 1000mbps full-duplex */
-+#define LPA_SGMII_LINK		0x8000	/* PHY link with copper-side partner */
-+
- /* 1000BASE-T Control register */
- #define ADVERTISE_1000FULL	0x0200  /* Advertise 1000BASE-T full duplex */
- #define ADVERTISE_1000HALF	0x0100  /* Advertise 1000BASE-T half duplex */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0379-net-phylink-make-QSGMII-a-valid-PHY-mode-for-in-band.patch b/target/linux/layerscape/patches-5.4/701-net-0379-net-phylink-make-QSGMII-a-valid-PHY-mode-for-in-band.patch
deleted file mode 100644
index 44c9a86970..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0379-net-phylink-make-QSGMII-a-valid-PHY-mode-for-in-band.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 5fdc065751ee25688f99da501123f7e7d4020751 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Fri, 22 Nov 2019 13:46:46 +0200
-Subject: [PATCH] net: phylink: make QSGMII a valid PHY mode for in-band AN
-
-QSGMII is a SerDes protocol clocked at 5 Gbaud (4 times higher than
-SGMII which is clocked at 1.25 Gbaud), with the same 8b/10b encoding and
-some extra symbols for synchronization. Logically it offers 4 SGMII
-interfaces multiplexed onto the same physical lanes. Each MAC PCS has
-its own in-band AN process with the system side of the QSGMII PHY, which
-is identical to the regular SGMII AN process.
-
-So allow QSGMII as a valid in-band AN mode, since it is no different
-from software perspective from regular SGMII.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- drivers/net/phy/phylink.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -283,6 +283,7 @@ static int phylink_parse_mode(struct phy
- 
- 		switch (pl->link_config.interface) {
- 		case PHY_INTERFACE_MODE_SGMII:
-+		case PHY_INTERFACE_MODE_QSGMII:
- 			phylink_set(pl->supported, 10baseT_Half);
- 			phylink_set(pl->supported, 10baseT_Full);
- 			phylink_set(pl->supported, 100baseT_Half);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0380-net-phylink-add-support-for-polling-MAC-PCS.patch b/target/linux/layerscape/patches-5.4/701-net-0380-net-phylink-add-support-for-polling-MAC-PCS.patch
deleted file mode 100644
index f9b97b3f4e..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0380-net-phylink-add-support-for-polling-MAC-PCS.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From c12db737cf62ca262c01ec6d4ba942b34db35d8b Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Fri, 27 Dec 2019 19:45:22 +0200
-Subject: [PATCH] net: phylink: add support for polling MAC PCS
-
-Some MAC PCS blocks are unable to provide interrupts when their status
-changes. As we already have support in phylink for polling status, use
-this to provide a hook for MACs to enable polling mode.
-
-The patch idea was picked up from Russell King's suggestion on the macb
-phylink patch thread here [0] but the implementation was changed.
-Instead of introducing a new phylink_start_poll() function, which would
-make the implementation cumbersome for common PHYLINK implementations
-for multiple types of devices, like DSA, just add a boolean property to
-the phylink_config structure, which is just as backwards-compatible.
-
-https://lkml.org/lkml/2019/12/16/603
-
-Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
-
-Conflicts:
-	drivers/net/phy/phylink.c
-
-with upstream commit 24cf0e693bb5 ("net: phylink: split link_an_mode
-configured and current settings") submitted for net-next and merged
-during v5.5-rc1.
----
- Documentation/networking/sfp-phylink.rst | 3 ++-
- drivers/net/phy/phylink.c                | 3 ++-
- include/linux/phylink.h                  | 2 ++
- 3 files changed, 6 insertions(+), 2 deletions(-)
-
---- a/Documentation/networking/sfp-phylink.rst
-+++ b/Documentation/networking/sfp-phylink.rst
-@@ -251,7 +251,8 @@ this documentation.
- 	phylink_mac_change(priv->phylink, link_is_up);
- 
-     where ``link_is_up`` is true if the link is currently up or false
--    otherwise.
-+    otherwise. If a MAC is unable to provide these interrupts, then
-+    it should set ``priv->phylink_config.pcs_poll = true;`` in step 9.
- 
- 11. Verify that the driver does not call::
- 
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1008,7 +1008,8 @@ void phylink_start(struct phylink *pl)
- 		if (irq <= 0)
- 			mod_timer(&pl->link_poll, jiffies + HZ);
- 	}
--	if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
-+	if ((pl->cfg_link_an_mode == MLO_AN_FIXED && pl->get_fixed_state) ||
-+	    pl->config->pcs_poll)
- 		mod_timer(&pl->link_poll, jiffies + HZ);
- 	if (pl->phydev)
- 		phy_start(pl->phydev);
---- a/include/linux/phylink.h
-+++ b/include/linux/phylink.h
-@@ -63,10 +63,12 @@ enum phylink_op_type {
-  * struct phylink_config - PHYLINK configuration structure
-  * @dev: a pointer to a struct device associated with the MAC
-  * @type: operation type of PHYLINK instance
-+ * @pcs_poll: MAC PCS cannot provide link change interrupt
-  */
- struct phylink_config {
- 	struct device *dev;
- 	enum phylink_op_type type;
-+	bool pcs_poll;
- };
- 
- /**
diff --git a/target/linux/layerscape/patches-5.4/701-net-0381-net-dsa-Pass-pcs_poll-flag-from-driver-to-PHYLINK.patch b/target/linux/layerscape/patches-5.4/701-net-0381-net-dsa-Pass-pcs_poll-flag-from-driver-to-PHYLINK.patch
deleted file mode 100644
index fe2ceee8d4..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0381-net-dsa-Pass-pcs_poll-flag-from-driver-to-PHYLINK.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 3f911800613a3417101563b488c51a9b310ba7fa Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Fri, 27 Dec 2019 20:14:57 +0200
-Subject: [PATCH] net: dsa: Pass pcs_poll flag from driver to PHYLINK
-
-The DSA drivers that implement .phylink_mac_link_state should normally
-register an interrupt for the PCS, from which they should call
-phylink_mac_change(). However not all switches implement this, and those
-who don't should set this flag in dsa_switch in the .setup callback, so
-that PHYLINK will poll for a few ms until the in-band AN link timer
-expires and the PCS state settles.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-
-Conflicts:
-	include/net/dsa.h
-
-trivially with upstream commit 05f294a85235 ("net: dsa: allocate ports
-on touch") which was merged in v5.4-rc3.
----
- include/net/dsa.h | 5 +++++
- net/dsa/port.c    | 1 +
- 2 files changed, 6 insertions(+)
-
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -291,6 +291,11 @@ struct dsa_switch {
- 	 */
- 	bool			vlan_filtering;
- 
-+	/* MAC PCS does not provide link state change interrupt, and requires
-+	 * polling. Flag passed on to PHYLINK.
-+	 */
-+	bool			pcs_poll;
-+
- 	/* Dynamically allocated ports, keep last */
- 	size_t num_ports;
- 	struct dsa_port ports[];
---- a/net/dsa/port.c
-+++ b/net/dsa/port.c
-@@ -639,6 +639,7 @@ static int dsa_port_phylink_register(str
- 
- 	dp->pl_config.dev = ds->dev;
- 	dp->pl_config.type = PHYLINK_DEV;
-+	dp->pl_config.pcs_poll = ds->pcs_poll;
- 
- 	dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(port_dn),
- 				mode, &dsa_port_phylink_mac_ops);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0382-enetc-Make-MDIO-accessors-more-generic-and-export-to.patch b/target/linux/layerscape/patches-5.4/701-net-0382-enetc-Make-MDIO-accessors-more-generic-and-export-to.patch
deleted file mode 100644
index c11f1a72ed..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0382-enetc-Make-MDIO-accessors-more-generic-and-export-to.patch
+++ /dev/null
@@ -1,446 +0,0 @@
-From 126e6f022c749ac1bf3a607269a106ccd87d0594 Mon Sep 17 00:00:00 2001
-From: Claudiu Manoil <claudiu.manoil@nxp.com>
-Date: Mon, 12 Aug 2019 20:26:42 +0300
-Subject: [PATCH] enetc: Make MDIO accessors more generic and export to
- include/linux/fsl
-
-Within the LS1028A SoC, the register map for the ENETC MDIO controller
-is instantiated a few times: for the central (external) MDIO controller,
-for the internal bus of each standalone ENETC port, and for the internal
-bus of the Felix switch.
-
-Refactoring is needed to support multiple MDIO buses from multiple
-drivers. The enetc_hw structure is made an opaque type and a smaller
-enetc_mdio_priv is created.
-
-'mdio_base' - MDIO registers base address - is being parameterized, to
-be able to work with different MDIO register bases.
-
-The ENETC MDIO bus operations are exported from the fsl-enetc-mdio
-kernel object, the same that registers the central MDIO controller (the
-dedicated PF). The ENETC main driver has been changed to select it, and
-use its exported helpers to further register its private MDIO bus. The
-DSA Felix driver will do the same.
-
-Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-
-Conflicts:
-	drivers/net/ethernet/freescale/enetc/enetc_mdio.c
-	drivers/net/ethernet/freescale/enetc/enetc_mdio.h
-	drivers/net/ethernet/freescale/enetc/enetc_pci_mdio.c
-	drivers/net/ethernet/freescale/enetc/enetc_pf.c
-	drivers/net/ethernet/freescale/enetc/enetc_pf.h
-
-mostly with the previous (downstream version of this commit) patch
-572ee5d842da ("enetc: Make mdio accessors more generic"), which couldn't
-be reverted cleanly due to the existing downstream workaround for the
-MDIO erratum.
----
- drivers/net/ethernet/freescale/enetc/Kconfig       |  1 +
- drivers/net/ethernet/freescale/enetc/Makefile      |  2 +-
- drivers/net/ethernet/freescale/enetc/enetc_mdio.c  | 76 ++++------------------
- drivers/net/ethernet/freescale/enetc/enetc_mdio.h  | 12 ----
- .../net/ethernet/freescale/enetc/enetc_pci_mdio.c  | 41 +++++++-----
- drivers/net/ethernet/freescale/enetc/enetc_pf.c    | 71 ++++++++++++++++++++
- drivers/net/ethernet/freescale/enetc/enetc_pf.h    |  5 --
- include/linux/fsl/enetc_mdio.h                     | 55 ++++++++++++++++
- 8 files changed, 163 insertions(+), 100 deletions(-)
- delete mode 100644 drivers/net/ethernet/freescale/enetc/enetc_mdio.h
- create mode 100644 include/linux/fsl/enetc_mdio.h
-
---- a/drivers/net/ethernet/freescale/enetc/Kconfig
-+++ b/drivers/net/ethernet/freescale/enetc/Kconfig
-@@ -2,6 +2,7 @@
- config FSL_ENETC
- 	tristate "ENETC PF driver"
- 	depends on PCI && PCI_MSI && (ARCH_LAYERSCAPE || COMPILE_TEST)
-+	select FSL_ENETC_MDIO
- 	select PHYLIB
- 	help
- 	  This driver supports NXP ENETC gigabit ethernet controller PCIe
---- a/drivers/net/ethernet/freescale/enetc/Makefile
-+++ b/drivers/net/ethernet/freescale/enetc/Makefile
-@@ -3,7 +3,7 @@
- common-objs := enetc.o enetc_cbdr.o enetc_ethtool.o
- 
- obj-$(CONFIG_FSL_ENETC) += fsl-enetc.o
--fsl-enetc-y := enetc_pf.o enetc_mdio.o $(common-objs)
-+fsl-enetc-y := enetc_pf.o $(common-objs)
- fsl-enetc-$(CONFIG_PCI_IOV) += enetc_msg.o
- fsl-enetc-$(CONFIG_FSL_ENETC_QOS) += enetc_qos.o
- fsl-enetc-$(CONFIG_ENETC_TSN) += enetc_tsn.o
---- a/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
-@@ -1,13 +1,13 @@
- // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
- /* Copyright 2019 NXP */
- 
-+#include <linux/fsl/enetc_mdio.h>
- #include <linux/mdio.h>
- #include <linux/of_mdio.h>
- #include <linux/iopoll.h>
- #include <linux/of.h>
- 
- #include "enetc_pf.h"
--#include "enetc_mdio.h"
- 
- #define	ENETC_MDIO_CFG	0x0	/* MDIO configuration and status */
- #define	ENETC_MDIO_CTL	0x4	/* MDIO control */
-@@ -99,6 +99,7 @@ int enetc_mdio_write(struct mii_bus *bus
- 
- 	return 0;
- }
-+EXPORT_SYMBOL_GPL(enetc_mdio_write);
- 
- int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
- {
-@@ -154,73 +155,18 @@ int enetc_mdio_read(struct mii_bus *bus,
- 
- 	return value;
- }
-+EXPORT_SYMBOL_GPL(enetc_mdio_read);
- 
--int enetc_mdio_probe(struct enetc_pf *pf)
-+struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
- {
--	struct device *dev = &pf->si->pdev->dev;
--	struct enetc_mdio_priv *mdio_priv;
--	struct device_node *np;
--	struct mii_bus *bus;
--	int err;
--
--	bus = devm_mdiobus_alloc_size(dev, sizeof(*mdio_priv));
--	if (!bus)
--		return -ENOMEM;
--
--	bus->name = "Freescale ENETC MDIO Bus";
--	bus->read = enetc_mdio_read;
--	bus->write = enetc_mdio_write;
--	bus->parent = dev;
--	mdio_priv = bus->priv;
--	mdio_priv->hw = &pf->si->hw;
--	mdio_priv->mdio_base = ENETC_EMDIO_BASE;
--	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
--
--	np = of_get_child_by_name(dev->of_node, "mdio");
--	if (!np) {
--		dev_err(dev, "MDIO node missing\n");
--		return -EINVAL;
--	}
--
--	err = of_mdiobus_register(bus, np);
--	if (err) {
--		of_node_put(np);
--		dev_err(dev, "cannot register MDIO bus\n");
--		return err;
--	}
--
--	of_node_put(np);
--	pf->mdio = bus;
--
--	return 0;
--}
-+	struct enetc_hw *hw;
- 
--void enetc_mdio_remove(struct enetc_pf *pf)
--{
--	if (pf->mdio)
--		mdiobus_unregister(pf->mdio);
--}
--
--int enetc_imdio_init(struct enetc_pf *pf)
--{
--	struct device *dev = &pf->si->pdev->dev;
--	struct enetc_mdio_priv *mdio_priv;
--	struct mii_bus *bus;
-+	hw = devm_kzalloc(dev, sizeof(*hw), GFP_KERNEL);
-+	if (!hw)
-+		return ERR_PTR(-ENOMEM);
- 
--	bus = devm_mdiobus_alloc_size(dev, sizeof(*mdio_priv));
--	if (!bus)
--		return -ENOMEM;
-+	hw->port = port_regs;
- 
--	bus->name = "FSL ENETC internal MDIO Bus";
--	bus->read = enetc_mdio_read;
--	bus->write = enetc_mdio_write;
--	bus->parent = dev;
--	mdio_priv = bus->priv;
--	mdio_priv->hw = &pf->si->hw;
--	mdio_priv->mdio_base = ENETC_PM_IMDIO_BASE;
--	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
--
--	pf->imdio = bus;
--
--	return 0;
-+	return hw;
- }
-+EXPORT_SYMBOL_GPL(enetc_hw_alloc);
---- a/drivers/net/ethernet/freescale/enetc/enetc_mdio.h
-+++ /dev/null
-@@ -1,12 +0,0 @@
--/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
--/* Copyright 2019 NXP */
--
--#include <linux/phy.h>
--
--struct enetc_mdio_priv {
--	struct enetc_hw *hw;
--	int mdio_base;
--};
--
--int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum, u16 value);
--int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum);
---- a/drivers/net/ethernet/freescale/enetc/enetc_pci_mdio.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pci_mdio.c
-@@ -1,8 +1,8 @@
- // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
- /* Copyright 2019 NXP */
-+#include <linux/fsl/enetc_mdio.h>
- #include <linux/of_mdio.h>
- #include "enetc_pf.h"
--#include "enetc_mdio.h"
- 
- #define ENETC_MDIO_DEV_ID	0xee01
- #define ENETC_MDIO_DEV_NAME	"FSL PCIe IE Central MDIO"
-@@ -14,17 +14,29 @@ static int enetc_pci_mdio_probe(struct p
- {
- 	struct enetc_mdio_priv *mdio_priv;
- 	struct device *dev = &pdev->dev;
-+	void __iomem *port_regs;
- 	struct enetc_hw *hw;
- 	struct mii_bus *bus;
- 	int err;
- 
--	hw = devm_kzalloc(dev, sizeof(*hw), GFP_KERNEL);
--	if (!hw)
--		return -ENOMEM;
-+	port_regs = pci_iomap(pdev, 0, 0);
-+	if (!port_regs) {
-+		dev_err(dev, "iomap failed\n");
-+		err = -ENXIO;
-+		goto err_ioremap;
-+	}
-+
-+	hw = enetc_hw_alloc(dev, port_regs);
-+	if (IS_ERR(enetc_hw_alloc)) {
-+		err = PTR_ERR(hw);
-+		goto err_hw_alloc;
-+	}
- 
- 	bus = devm_mdiobus_alloc_size(dev, sizeof(*mdio_priv));
--	if (!bus)
--		return -ENOMEM;
-+	if (!bus) {
-+		err = -ENOMEM;
-+		goto err_mdiobus_alloc;
-+	}
- 
- 	bus->name = ENETC_MDIO_BUS_NAME;
- 	bus->read = enetc_mdio_read;
-@@ -39,7 +51,7 @@ static int enetc_pci_mdio_probe(struct p
- 	err = pci_enable_device_mem(pdev);
- 	if (err) {
- 		dev_err(dev, "device enable failed\n");
--		return err;
-+		goto err_pci_enable;
- 	}
- 
- 	err = pci_request_region(pdev, 0, KBUILD_MODNAME);
-@@ -48,13 +60,6 @@ static int enetc_pci_mdio_probe(struct p
- 		goto err_pci_mem_reg;
- 	}
- 
--	hw->port = pci_iomap(pdev, 0, 0);
--	if (!hw->port) {
--		err = -ENXIO;
--		dev_err(dev, "iomap failed\n");
--		goto err_ioremap;
--	}
--
- 	err = of_mdiobus_register(bus, dev->of_node);
- 	if (err)
- 		goto err_mdiobus_reg;
-@@ -64,12 +69,14 @@ static int enetc_pci_mdio_probe(struct p
- 	return 0;
- 
- err_mdiobus_reg:
--	iounmap(mdio_priv->hw->port);
--err_ioremap:
- 	pci_release_mem_regions(pdev);
- err_pci_mem_reg:
- 	pci_disable_device(pdev);
--
-+err_pci_enable:
-+err_mdiobus_alloc:
-+	iounmap(port_regs);
-+err_hw_alloc:
-+err_ioremap:
- 	return err;
- }
- 
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-@@ -2,6 +2,7 @@
- /* Copyright 2017-2019 NXP */
- 
- #include <linux/module.h>
-+#include <linux/fsl/enetc_mdio.h>
- #include <linux/of_mdio.h>
- #include <linux/of_net.h>
- #include "enetc_pf.h"
-@@ -760,6 +761,52 @@ static void enetc_pf_netdev_setup(struct
- 	enetc_get_primary_mac_addr(&si->hw, ndev->dev_addr);
- }
- 
-+static int enetc_mdio_probe(struct enetc_pf *pf)
-+{
-+	struct device *dev = &pf->si->pdev->dev;
-+	struct enetc_mdio_priv *mdio_priv;
-+	struct device_node *np;
-+	struct mii_bus *bus;
-+	int err;
-+
-+	bus = devm_mdiobus_alloc_size(dev, sizeof(*mdio_priv));
-+	if (!bus)
-+		return -ENOMEM;
-+
-+	bus->name = "Freescale ENETC MDIO Bus";
-+	bus->read = enetc_mdio_read;
-+	bus->write = enetc_mdio_write;
-+	bus->parent = dev;
-+	mdio_priv = bus->priv;
-+	mdio_priv->hw = &pf->si->hw;
-+	mdio_priv->mdio_base = ENETC_EMDIO_BASE;
-+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
-+
-+	np = of_get_child_by_name(dev->of_node, "mdio");
-+	if (!np) {
-+		dev_err(dev, "MDIO node missing\n");
-+		return -EINVAL;
-+	}
-+
-+	err = of_mdiobus_register(bus, np);
-+	if (err) {
-+		of_node_put(np);
-+		dev_err(dev, "cannot register MDIO bus\n");
-+		return err;
-+	}
-+
-+	of_node_put(np);
-+	pf->mdio = bus;
-+
-+	return 0;
-+}
-+
-+static void enetc_mdio_remove(struct enetc_pf *pf)
-+{
-+	if (pf->mdio)
-+		mdiobus_unregister(pf->mdio);
-+}
-+
- static int enetc_of_get_phy(struct enetc_pf *pf)
- {
- 	struct device *dev = &pf->si->pdev->dev;
-@@ -911,6 +958,30 @@ static void enetc_configure_sxgmii(struc
- 		     ENETC_PCS_CR_LANE_RESET | ENETC_PCS_CR_RESET_AN);
- }
- 
-+static int enetc_imdio_init(struct enetc_pf *pf)
-+{
-+	struct device *dev = &pf->si->pdev->dev;
-+	struct enetc_mdio_priv *mdio_priv;
-+	struct mii_bus *bus;
-+
-+	bus = devm_mdiobus_alloc_size(dev, sizeof(*mdio_priv));
-+	if (!bus)
-+		return -ENOMEM;
-+
-+	bus->name = "FSL ENETC internal MDIO Bus";
-+	bus->read = enetc_mdio_read;
-+	bus->write = enetc_mdio_write;
-+	bus->parent = dev;
-+	mdio_priv = bus->priv;
-+	mdio_priv->hw = &pf->si->hw;
-+	mdio_priv->mdio_base = ENETC_PM_IMDIO_BASE;
-+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
-+
-+	pf->imdio = bus;
-+
-+	return 0;
-+}
-+
- static int enetc_configure_serdes(struct enetc_ndev_priv *priv)
- {
- 	struct enetc_pf *pf = enetc_si_priv(priv->si);
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
-@@ -53,8 +53,3 @@ struct enetc_pf {
- int enetc_msg_psi_init(struct enetc_pf *pf);
- void enetc_msg_psi_free(struct enetc_pf *pf);
- void enetc_msg_handle_rxmsg(struct enetc_pf *pf, int mbox_id, u16 *status);
--
--/* MDIO */
--int enetc_mdio_probe(struct enetc_pf *pf);
--void enetc_mdio_remove(struct enetc_pf *pf);
--int enetc_imdio_init(struct enetc_pf *pf);
---- /dev/null
-+++ b/include/linux/fsl/enetc_mdio.h
-@@ -0,0 +1,55 @@
-+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-+/* Copyright 2019 NXP */
-+
-+#ifndef _FSL_ENETC_MDIO_H_
-+#define _FSL_ENETC_MDIO_H_
-+
-+#include <linux/phy.h>
-+
-+/* PCS registers */
-+#define ENETC_PCS_LINK_TIMER1			0x12
-+#define ENETC_PCS_LINK_TIMER1_VAL		0x06a0
-+#define ENETC_PCS_LINK_TIMER2			0x13
-+#define ENETC_PCS_LINK_TIMER2_VAL		0x0003
-+#define ENETC_PCS_IF_MODE			0x14
-+#define ENETC_PCS_IF_MODE_SGMII_EN		BIT(0)
-+#define ENETC_PCS_IF_MODE_USE_SGMII_AN		BIT(1)
-+#define ENETC_PCS_IF_MODE_SGMII_SPEED(x)	(((x) << 2) & GENMASK(3, 2))
-+
-+/* Not a mistake, the SerDes PLL needs to be set at 3.125 GHz by Reset
-+ * Configuration Word (RCW, outside Linux control) for 2.5G SGMII mode. The PCS
-+ * still thinks it's at gigabit.
-+ */
-+enum enetc_pcs_speed {
-+	ENETC_PCS_SPEED_10	= 0,
-+	ENETC_PCS_SPEED_100	= 1,
-+	ENETC_PCS_SPEED_1000	= 2,
-+	ENETC_PCS_SPEED_2500	= 2,
-+};
-+
-+struct enetc_hw;
-+
-+struct enetc_mdio_priv {
-+	struct enetc_hw *hw;
-+	int mdio_base;
-+};
-+
-+#if IS_REACHABLE(CONFIG_FSL_ENETC_MDIO)
-+
-+int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum);
-+int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum, u16 value);
-+struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs);
-+
-+#else
-+
-+static inline int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
-+{ return -EINVAL; }
-+static inline int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum,
-+				   u16 value)
-+{ return -EINVAL; }
-+struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
-+{ return ERR_PTR(-EINVAL); }
-+
-+#endif
-+
-+#endif
diff --git a/target/linux/layerscape/patches-5.4/701-net-0383-enetc-Set-MDIO_CFG_HOLD-to-the-recommended-value-of-.patch b/target/linux/layerscape/patches-5.4/701-net-0383-enetc-Set-MDIO_CFG_HOLD-to-the-recommended-value-of-.patch
deleted file mode 100644
index 50b34520e3..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0383-enetc-Set-MDIO_CFG_HOLD-to-the-recommended-value-of-.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From c0308743202449028d2b839d9b01d3d5ed2b210a Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Wed, 27 Nov 2019 19:21:13 +0200
-Subject: [PATCH] enetc: Set MDIO_CFG_HOLD to the recommended value of 2
-
-This increases the MDIO hold time to 5 enet_clk cycles from the previous
-value of 0. This is actually the out-of-reset value, that the driver was
-previously overwriting with 0. Zero worked for the external MDIO, but
-breaks communication with the internal MDIO buses on which the PCS of
-ENETC SI's and Felix switch are found.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- drivers/net/ethernet/freescale/enetc/enetc_mdio.c | 12 ++++++++----
- 1 file changed, 8 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
-@@ -31,15 +31,19 @@ static inline void _enetc_mdio_wr(struct
- 	_enetc_mdio_wr(mdio_priv, ENETC_##off, val)
- #define enetc_mdio_rd_reg(off)	enetc_mdio_rd(mdio_priv, off)
- 
--#define ENETC_MDC_DIV		258
--
- #define MDIO_CFG_CLKDIV(x)	((((x) >> 1) & 0xff) << 8)
- #define MDIO_CFG_BSY		BIT(0)
- #define MDIO_CFG_RD_ER		BIT(1)
-+#define MDIO_CFG_HOLD(x)	(((x) << 2) & GENMASK(4, 2))
- #define MDIO_CFG_ENC45		BIT(6)
-  /* external MDIO only - driven on neg MDC edge */
- #define MDIO_CFG_NEG		BIT(23)
- 
-+#define ENETC_EMDIO_CFG \
-+	(MDIO_CFG_HOLD(2) | \
-+	 MDIO_CFG_CLKDIV(258) | \
-+	 MDIO_CFG_NEG)
-+
- #define MDIO_CTL_DEV_ADDR(x)	((x) & 0x1f)
- #define MDIO_CTL_PORT_ADDR(x)	(((x) & 0x1f) << 5)
- #define MDIO_CTL_READ		BIT(15)
-@@ -61,7 +65,7 @@ int enetc_mdio_write(struct mii_bus *bus
- 	u16 dev_addr;
- 	int ret;
- 
--	mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG;
-+	mdio_cfg = ENETC_EMDIO_CFG;
- 	if (regnum & MII_ADDR_C45) {
- 		dev_addr = (regnum >> 16) & 0x1f;
- 		mdio_cfg |= MDIO_CFG_ENC45;
-@@ -108,7 +112,7 @@ int enetc_mdio_read(struct mii_bus *bus,
- 	u16 dev_addr, value;
- 	int ret;
- 
--	mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG;
-+	mdio_cfg = ENETC_EMDIO_CFG;
- 	if (regnum & MII_ADDR_C45) {
- 		dev_addr = (regnum >> 16) & 0x1f;
- 		mdio_cfg |= MDIO_CFG_ENC45;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0384-net-mscc-ocelot-make-phy_mode-a-member-of-the-common.patch b/target/linux/layerscape/patches-5.4/701-net-0384-net-mscc-ocelot-make-phy_mode-a-member-of-the-common.patch
deleted file mode 100644
index 662ad103f9..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0384-net-mscc-ocelot-make-phy_mode-a-member-of-the-common.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 1737de8045838dcf3c7713c940eb1582810a319f Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Mon, 16 Dec 2019 15:07:20 +0200
-Subject: [PATCH] net: mscc: ocelot: make phy_mode a member of the common
- struct ocelot_port
-
-The Ocelot switchdev driver and the Felix DSA one need it for different
-reasons. Felix (or at least the VSC9959 instantiation in NXP LS1028A) is
-integrated with the traditional NXP Layerscape PCS design which does not
-support runtime configuration of SerDes protocol. So it needs to
-pre-validate the phy-mode from the device tree and prevent PHYLINK from
-attempting to change it. For this, it needs to cache it in a private
-variable.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- drivers/net/ethernet/mscc/ocelot.c       | 7 ++++---
- drivers/net/ethernet/mscc/ocelot.h       | 1 -
- drivers/net/ethernet/mscc/ocelot_board.c | 4 ++--
- include/soc/mscc/ocelot.h                | 2 ++
- 4 files changed, 8 insertions(+), 6 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -500,13 +500,14 @@ EXPORT_SYMBOL(ocelot_port_enable);
- static int ocelot_port_open(struct net_device *dev)
- {
- 	struct ocelot_port_private *priv = netdev_priv(dev);
--	struct ocelot *ocelot = priv->port.ocelot;
-+	struct ocelot_port *ocelot_port = &priv->port;
-+	struct ocelot *ocelot = ocelot_port->ocelot;
- 	int port = priv->chip_port;
- 	int err;
- 
- 	if (priv->serdes) {
- 		err = phy_set_mode_ext(priv->serdes, PHY_MODE_ETHERNET,
--				       priv->phy_mode);
-+				       ocelot_port->phy_mode);
- 		if (err) {
- 			netdev_err(dev, "Could not set mode of SerDes\n");
- 			return err;
-@@ -514,7 +515,7 @@ static int ocelot_port_open(struct net_d
- 	}
- 
- 	err = phy_connect_direct(dev, priv->phy, &ocelot_port_adjust_link,
--				 priv->phy_mode);
-+				 ocelot_port->phy_mode);
- 	if (err) {
- 		netdev_err(dev, "Could not attach to PHY\n");
- 		return err;
---- a/drivers/net/ethernet/mscc/ocelot.h
-+++ b/drivers/net/ethernet/mscc/ocelot.h
-@@ -70,7 +70,6 @@ struct ocelot_port_private {
- 
- 	u8 vlan_aware;
- 
--	phy_interface_t phy_mode;
- 	struct phy *serdes;
- 
- 	struct ocelot_port_tc tc;
---- a/drivers/net/ethernet/mscc/ocelot_board.c
-+++ b/drivers/net/ethernet/mscc/ocelot_board.c
-@@ -412,9 +412,9 @@ static int mscc_ocelot_probe(struct plat
- 		if (phy_mode < 0)
- 			phy_mode = PHY_INTERFACE_MODE_NA;
- 
--		priv->phy_mode = phy_mode;
-+		ocelot_port->phy_mode = phy_mode;
- 
--		switch (priv->phy_mode) {
-+		switch (ocelot_port->phy_mode) {
- 		case PHY_INTERFACE_MODE_NA:
- 			continue;
- 		case PHY_INTERFACE_MODE_SGMII:
---- a/include/soc/mscc/ocelot.h
-+++ b/include/soc/mscc/ocelot.h
-@@ -425,6 +425,8 @@ struct ocelot_port {
- 	u8				ptp_cmd;
- 	struct sk_buff_head		tx_skbs;
- 	u8				ts_id;
-+
-+	phy_interface_t			phy_mode;
- };
- 
- struct ocelot {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0385-net-mscc-ocelot-export-ANA-DEV-and-QSYS-registers-to.patch b/target/linux/layerscape/patches-5.4/701-net-0385-net-mscc-ocelot-export-ANA-DEV-and-QSYS-registers-to.patch
deleted file mode 100644
index b300ba9d76..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0385-net-mscc-ocelot-export-ANA-DEV-and-QSYS-registers-to.patch
+++ /dev/null
@@ -1,2457 +0,0 @@
-From 518d779810c0e4185f2d8a71fc112232df5be62e Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Mon, 16 Dec 2019 15:09:49 +0200
-Subject: [PATCH] net: mscc: ocelot: export ANA, DEV and QSYS registers to
- include/soc/mscc
-
-Since the Felix DSA driver is implementing its own PHYLINK instance due
-to SoC differences, it needs access to the few registers that are
-common, mainly for flow control.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-
-Conflicts:
-	drivers/net/ethernet/mscc/ocelot_tsn.c
-
-which has been added in downstream patch b5c05e3404a5 ("net: mscc:
-ocelot: tsn configuration support") and also needs to be adapted to the
-new location of the header files.
----
- drivers/net/ethernet/mscc/ocelot.h      |   6 +-
- drivers/net/ethernet/mscc/ocelot_ana.h  | 642 --------------------------------
- drivers/net/ethernet/mscc/ocelot_dev.h  | 275 --------------
- drivers/net/ethernet/mscc/ocelot_qsys.h | 270 --------------
- drivers/net/ethernet/mscc/ocelot_tsn.c  |   4 +-
- include/soc/mscc/ocelot_ana.h           | 642 ++++++++++++++++++++++++++++++++
- include/soc/mscc/ocelot_dev.h           | 275 ++++++++++++++
- include/soc/mscc/ocelot_qsys.h          | 270 ++++++++++++++
- 8 files changed, 1192 insertions(+), 1192 deletions(-)
- delete mode 100644 drivers/net/ethernet/mscc/ocelot_ana.h
- delete mode 100644 drivers/net/ethernet/mscc/ocelot_dev.h
- delete mode 100644 drivers/net/ethernet/mscc/ocelot_qsys.h
- create mode 100644 include/soc/mscc/ocelot_ana.h
- create mode 100644 include/soc/mscc/ocelot_dev.h
- create mode 100644 include/soc/mscc/ocelot_qsys.h
-
---- a/drivers/net/ethernet/mscc/ocelot.h
-+++ b/drivers/net/ethernet/mscc/ocelot.h
-@@ -18,11 +18,11 @@
- #include <linux/ptp_clock_kernel.h>
- #include <linux/regmap.h>
- 
-+#include <soc/mscc/ocelot_qsys.h>
- #include <soc/mscc/ocelot_sys.h>
-+#include <soc/mscc/ocelot_dev.h>
-+#include <soc/mscc/ocelot_ana.h>
- #include <soc/mscc/ocelot.h>
--#include "ocelot_ana.h"
--#include "ocelot_dev.h"
--#include "ocelot_qsys.h"
- #include "ocelot_rew.h"
- #include "ocelot_qs.h"
- #include "ocelot_tc.h"
---- a/drivers/net/ethernet/mscc/ocelot_ana.h
-+++ /dev/null
-@@ -1,642 +0,0 @@
--/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
--/*
-- * Microsemi Ocelot Switch driver
-- *
-- * Copyright (c) 2017 Microsemi Corporation
-- */
--
--#ifndef _MSCC_OCELOT_ANA_H_
--#define _MSCC_OCELOT_ANA_H_
--
--#define ANA_ANAGEFIL_B_DOM_EN                             BIT(22)
--#define ANA_ANAGEFIL_B_DOM_VAL                            BIT(21)
--#define ANA_ANAGEFIL_AGE_LOCKED                           BIT(20)
--#define ANA_ANAGEFIL_PID_EN                               BIT(19)
--#define ANA_ANAGEFIL_PID_VAL(x)                           (((x) << 14) & GENMASK(18, 14))
--#define ANA_ANAGEFIL_PID_VAL_M                            GENMASK(18, 14)
--#define ANA_ANAGEFIL_PID_VAL_X(x)                         (((x) & GENMASK(18, 14)) >> 14)
--#define ANA_ANAGEFIL_VID_EN                               BIT(13)
--#define ANA_ANAGEFIL_VID_VAL(x)                           ((x) & GENMASK(12, 0))
--#define ANA_ANAGEFIL_VID_VAL_M                            GENMASK(12, 0)
--
--#define ANA_STORMLIMIT_CFG_RSZ                            0x4
--
--#define ANA_STORMLIMIT_CFG_STORM_RATE(x)                  (((x) << 3) & GENMASK(6, 3))
--#define ANA_STORMLIMIT_CFG_STORM_RATE_M                   GENMASK(6, 3)
--#define ANA_STORMLIMIT_CFG_STORM_RATE_X(x)                (((x) & GENMASK(6, 3)) >> 3)
--#define ANA_STORMLIMIT_CFG_STORM_UNIT                     BIT(2)
--#define ANA_STORMLIMIT_CFG_STORM_MODE(x)                  ((x) & GENMASK(1, 0))
--#define ANA_STORMLIMIT_CFG_STORM_MODE_M                   GENMASK(1, 0)
--
--#define ANA_AUTOAGE_AGE_FAST                              BIT(21)
--#define ANA_AUTOAGE_AGE_PERIOD(x)                         (((x) << 1) & GENMASK(20, 1))
--#define ANA_AUTOAGE_AGE_PERIOD_M                          GENMASK(20, 1)
--#define ANA_AUTOAGE_AGE_PERIOD_X(x)                       (((x) & GENMASK(20, 1)) >> 1)
--#define ANA_AUTOAGE_AUTOAGE_LOCKED                        BIT(0)
--
--#define ANA_MACTOPTIONS_REDUCED_TABLE                     BIT(1)
--#define ANA_MACTOPTIONS_SHADOW                            BIT(0)
--
--#define ANA_AGENCTRL_FID_MASK(x)                          (((x) << 12) & GENMASK(23, 12))
--#define ANA_AGENCTRL_FID_MASK_M                           GENMASK(23, 12)
--#define ANA_AGENCTRL_FID_MASK_X(x)                        (((x) & GENMASK(23, 12)) >> 12)
--#define ANA_AGENCTRL_IGNORE_DMAC_FLAGS                    BIT(11)
--#define ANA_AGENCTRL_IGNORE_SMAC_FLAGS                    BIT(10)
--#define ANA_AGENCTRL_FLOOD_SPECIAL                        BIT(9)
--#define ANA_AGENCTRL_FLOOD_IGNORE_VLAN                    BIT(8)
--#define ANA_AGENCTRL_MIRROR_CPU                           BIT(7)
--#define ANA_AGENCTRL_LEARN_CPU_COPY                       BIT(6)
--#define ANA_AGENCTRL_LEARN_FWD_KILL                       BIT(5)
--#define ANA_AGENCTRL_LEARN_IGNORE_VLAN                    BIT(4)
--#define ANA_AGENCTRL_CPU_CPU_KILL_ENA                     BIT(3)
--#define ANA_AGENCTRL_GREEN_COUNT_MODE                     BIT(2)
--#define ANA_AGENCTRL_YELLOW_COUNT_MODE                    BIT(1)
--#define ANA_AGENCTRL_RED_COUNT_MODE                       BIT(0)
--
--#define ANA_FLOODING_RSZ                                  0x4
--
--#define ANA_FLOODING_FLD_UNICAST(x)                       (((x) << 12) & GENMASK(17, 12))
--#define ANA_FLOODING_FLD_UNICAST_M                        GENMASK(17, 12)
--#define ANA_FLOODING_FLD_UNICAST_X(x)                     (((x) & GENMASK(17, 12)) >> 12)
--#define ANA_FLOODING_FLD_BROADCAST(x)                     (((x) << 6) & GENMASK(11, 6))
--#define ANA_FLOODING_FLD_BROADCAST_M                      GENMASK(11, 6)
--#define ANA_FLOODING_FLD_BROADCAST_X(x)                   (((x) & GENMASK(11, 6)) >> 6)
--#define ANA_FLOODING_FLD_MULTICAST(x)                     ((x) & GENMASK(5, 0))
--#define ANA_FLOODING_FLD_MULTICAST_M                      GENMASK(5, 0)
--
--#define ANA_FLOODING_IPMC_FLD_MC4_CTRL(x)                 (((x) << 18) & GENMASK(23, 18))
--#define ANA_FLOODING_IPMC_FLD_MC4_CTRL_M                  GENMASK(23, 18)
--#define ANA_FLOODING_IPMC_FLD_MC4_CTRL_X(x)               (((x) & GENMASK(23, 18)) >> 18)
--#define ANA_FLOODING_IPMC_FLD_MC4_DATA(x)                 (((x) << 12) & GENMASK(17, 12))
--#define ANA_FLOODING_IPMC_FLD_MC4_DATA_M                  GENMASK(17, 12)
--#define ANA_FLOODING_IPMC_FLD_MC4_DATA_X(x)               (((x) & GENMASK(17, 12)) >> 12)
--#define ANA_FLOODING_IPMC_FLD_MC6_CTRL(x)                 (((x) << 6) & GENMASK(11, 6))
--#define ANA_FLOODING_IPMC_FLD_MC6_CTRL_M                  GENMASK(11, 6)
--#define ANA_FLOODING_IPMC_FLD_MC6_CTRL_X(x)               (((x) & GENMASK(11, 6)) >> 6)
--#define ANA_FLOODING_IPMC_FLD_MC6_DATA(x)                 ((x) & GENMASK(5, 0))
--#define ANA_FLOODING_IPMC_FLD_MC6_DATA_M                  GENMASK(5, 0)
--
--#define ANA_SFLOW_CFG_RSZ                                 0x4
--
--#define ANA_SFLOW_CFG_SF_RATE(x)                          (((x) << 2) & GENMASK(13, 2))
--#define ANA_SFLOW_CFG_SF_RATE_M                           GENMASK(13, 2)
--#define ANA_SFLOW_CFG_SF_RATE_X(x)                        (((x) & GENMASK(13, 2)) >> 2)
--#define ANA_SFLOW_CFG_SF_SAMPLE_RX                        BIT(1)
--#define ANA_SFLOW_CFG_SF_SAMPLE_TX                        BIT(0)
--
--#define ANA_PORT_MODE_RSZ                                 0x4
--
--#define ANA_PORT_MODE_REDTAG_PARSE_CFG                    BIT(3)
--#define ANA_PORT_MODE_VLAN_PARSE_CFG(x)                   (((x) << 1) & GENMASK(2, 1))
--#define ANA_PORT_MODE_VLAN_PARSE_CFG_M                    GENMASK(2, 1)
--#define ANA_PORT_MODE_VLAN_PARSE_CFG_X(x)                 (((x) & GENMASK(2, 1)) >> 1)
--#define ANA_PORT_MODE_L3_PARSE_CFG                        BIT(0)
--
--#define ANA_CUT_THRU_CFG_RSZ                              0x4
--
--#define ANA_PGID_PGID_RSZ                                 0x4
--
--#define ANA_PGID_PGID_PGID(x)                             ((x) & GENMASK(11, 0))
--#define ANA_PGID_PGID_PGID_M                              GENMASK(11, 0)
--#define ANA_PGID_PGID_CPUQ_DST_PGID(x)                    (((x) << 27) & GENMASK(29, 27))
--#define ANA_PGID_PGID_CPUQ_DST_PGID_M                     GENMASK(29, 27)
--#define ANA_PGID_PGID_CPUQ_DST_PGID_X(x)                  (((x) & GENMASK(29, 27)) >> 27)
--
--#define ANA_TABLES_MACHDATA_VID(x)                        (((x) << 16) & GENMASK(28, 16))
--#define ANA_TABLES_MACHDATA_VID_M                         GENMASK(28, 16)
--#define ANA_TABLES_MACHDATA_VID_X(x)                      (((x) & GENMASK(28, 16)) >> 16)
--#define ANA_TABLES_MACHDATA_MACHDATA(x)                   ((x) & GENMASK(15, 0))
--#define ANA_TABLES_MACHDATA_MACHDATA_M                    GENMASK(15, 0)
--
--#define ANA_TABLES_STREAMDATA_SSID_VALID                  BIT(16)
--#define ANA_TABLES_STREAMDATA_SSID(x)                     (((x) << 9) & GENMASK(15, 9))
--#define ANA_TABLES_STREAMDATA_SSID_M                      GENMASK(15, 9)
--#define ANA_TABLES_STREAMDATA_SSID_X(x)                   (((x) & GENMASK(15, 9)) >> 9)
--#define ANA_TABLES_STREAMDATA_SFID_VALID                  BIT(8)
--#define ANA_TABLES_STREAMDATA_SFID(x)                     ((x) & GENMASK(7, 0))
--#define ANA_TABLES_STREAMDATA_SFID_M                      GENMASK(7, 0)
--
--#define ANA_TABLES_MACACCESS_MAC_CPU_COPY                 BIT(15)
--#define ANA_TABLES_MACACCESS_SRC_KILL                     BIT(14)
--#define ANA_TABLES_MACACCESS_IGNORE_VLAN                  BIT(13)
--#define ANA_TABLES_MACACCESS_AGED_FLAG                    BIT(12)
--#define ANA_TABLES_MACACCESS_VALID                        BIT(11)
--#define ANA_TABLES_MACACCESS_ENTRYTYPE(x)                 (((x) << 9) & GENMASK(10, 9))
--#define ANA_TABLES_MACACCESS_ENTRYTYPE_M                  GENMASK(10, 9)
--#define ANA_TABLES_MACACCESS_ENTRYTYPE_X(x)               (((x) & GENMASK(10, 9)) >> 9)
--#define ANA_TABLES_MACACCESS_DEST_IDX(x)                  (((x) << 3) & GENMASK(8, 3))
--#define ANA_TABLES_MACACCESS_DEST_IDX_M                   GENMASK(8, 3)
--#define ANA_TABLES_MACACCESS_DEST_IDX_X(x)                (((x) & GENMASK(8, 3)) >> 3)
--#define ANA_TABLES_MACACCESS_MAC_TABLE_CMD(x)             ((x) & GENMASK(2, 0))
--#define ANA_TABLES_MACACCESS_MAC_TABLE_CMD_M              GENMASK(2, 0)
--#define MACACCESS_CMD_IDLE                     0
--#define MACACCESS_CMD_LEARN                    1
--#define MACACCESS_CMD_FORGET                   2
--#define MACACCESS_CMD_AGE                      3
--#define MACACCESS_CMD_GET_NEXT                 4
--#define MACACCESS_CMD_INIT                     5
--#define MACACCESS_CMD_READ                     6
--#define MACACCESS_CMD_WRITE                    7
--
--#define ANA_TABLES_VLANACCESS_VLAN_PORT_MASK(x)           (((x) << 2) & GENMASK(13, 2))
--#define ANA_TABLES_VLANACCESS_VLAN_PORT_MASK_M            GENMASK(13, 2)
--#define ANA_TABLES_VLANACCESS_VLAN_PORT_MASK_X(x)         (((x) & GENMASK(13, 2)) >> 2)
--#define ANA_TABLES_VLANACCESS_VLAN_TBL_CMD(x)             ((x) & GENMASK(1, 0))
--#define ANA_TABLES_VLANACCESS_VLAN_TBL_CMD_M              GENMASK(1, 0)
--#define ANA_TABLES_VLANACCESS_CMD_IDLE                    0x0
--#define ANA_TABLES_VLANACCESS_CMD_WRITE                   0x2
--#define ANA_TABLES_VLANACCESS_CMD_INIT                    0x3
--
--#define ANA_TABLES_VLANTIDX_VLAN_SEC_FWD_ENA              BIT(17)
--#define ANA_TABLES_VLANTIDX_VLAN_FLOOD_DIS                BIT(16)
--#define ANA_TABLES_VLANTIDX_VLAN_PRIV_VLAN                BIT(15)
--#define ANA_TABLES_VLANTIDX_VLAN_LEARN_DISABLED           BIT(14)
--#define ANA_TABLES_VLANTIDX_VLAN_MIRROR                   BIT(13)
--#define ANA_TABLES_VLANTIDX_VLAN_SRC_CHK                  BIT(12)
--#define ANA_TABLES_VLANTIDX_V_INDEX(x)                    ((x) & GENMASK(11, 0))
--#define ANA_TABLES_VLANTIDX_V_INDEX_M                     GENMASK(11, 0)
--
--#define ANA_TABLES_ISDXACCESS_ISDX_PORT_MASK(x)           (((x) << 2) & GENMASK(8, 2))
--#define ANA_TABLES_ISDXACCESS_ISDX_PORT_MASK_M            GENMASK(8, 2)
--#define ANA_TABLES_ISDXACCESS_ISDX_PORT_MASK_X(x)         (((x) & GENMASK(8, 2)) >> 2)
--#define ANA_TABLES_ISDXACCESS_ISDX_TBL_CMD(x)             ((x) & GENMASK(1, 0))
--#define ANA_TABLES_ISDXACCESS_ISDX_TBL_CMD_M              GENMASK(1, 0)
--
--#define ANA_TABLES_ISDXTIDX_ISDX_SDLBI(x)                 (((x) << 21) & GENMASK(28, 21))
--#define ANA_TABLES_ISDXTIDX_ISDX_SDLBI_M                  GENMASK(28, 21)
--#define ANA_TABLES_ISDXTIDX_ISDX_SDLBI_X(x)               (((x) & GENMASK(28, 21)) >> 21)
--#define ANA_TABLES_ISDXTIDX_ISDX_MSTI(x)                  (((x) << 15) & GENMASK(20, 15))
--#define ANA_TABLES_ISDXTIDX_ISDX_MSTI_M                   GENMASK(20, 15)
--#define ANA_TABLES_ISDXTIDX_ISDX_MSTI_X(x)                (((x) & GENMASK(20, 15)) >> 15)
--#define ANA_TABLES_ISDXTIDX_ISDX_ES0_KEY_ENA              BIT(14)
--#define ANA_TABLES_ISDXTIDX_ISDX_FORCE_ENA                BIT(10)
--#define ANA_TABLES_ISDXTIDX_ISDX_INDEX(x)                 ((x) & GENMASK(7, 0))
--#define ANA_TABLES_ISDXTIDX_ISDX_INDEX_M                  GENMASK(7, 0)
--
--#define ANA_TABLES_ENTRYLIM_RSZ                           0x4
--
--#define ANA_TABLES_ENTRYLIM_ENTRYLIM(x)                   (((x) << 14) & GENMASK(17, 14))
--#define ANA_TABLES_ENTRYLIM_ENTRYLIM_M                    GENMASK(17, 14)
--#define ANA_TABLES_ENTRYLIM_ENTRYLIM_X(x)                 (((x) & GENMASK(17, 14)) >> 14)
--#define ANA_TABLES_ENTRYLIM_ENTRYSTAT(x)                  ((x) & GENMASK(13, 0))
--#define ANA_TABLES_ENTRYLIM_ENTRYSTAT_M                   GENMASK(13, 0)
--
--#define ANA_TABLES_STREAMACCESS_GEN_REC_SEQ_NUM(x)        (((x) << 4) & GENMASK(31, 4))
--#define ANA_TABLES_STREAMACCESS_GEN_REC_SEQ_NUM_M         GENMASK(31, 4)
--#define ANA_TABLES_STREAMACCESS_GEN_REC_SEQ_NUM_X(x)      (((x) & GENMASK(31, 4)) >> 4)
--#define ANA_TABLES_STREAMACCESS_SEQ_GEN_REC_ENA           BIT(3)
--#define ANA_TABLES_STREAMACCESS_GEN_REC_TYPE              BIT(2)
--#define ANA_TABLES_STREAMACCESS_STREAM_TBL_CMD(x)         ((x) & GENMASK(1, 0))
--#define ANA_TABLES_STREAMACCESS_STREAM_TBL_CMD_M          GENMASK(1, 0)
--
--#define ANA_TABLES_STREAMTIDX_SEQ_GEN_ERR_STATUS(x)       (((x) << 30) & GENMASK(31, 30))
--#define ANA_TABLES_STREAMTIDX_SEQ_GEN_ERR_STATUS_M        GENMASK(31, 30)
--#define ANA_TABLES_STREAMTIDX_SEQ_GEN_ERR_STATUS_X(x)     (((x) & GENMASK(31, 30)) >> 30)
--#define ANA_TABLES_STREAMTIDX_S_INDEX(x)                  (((x) << 16) & GENMASK(22, 16))
--#define ANA_TABLES_STREAMTIDX_S_INDEX_M                   GENMASK(22, 16)
--#define ANA_TABLES_STREAMTIDX_S_INDEX_X(x)                (((x) & GENMASK(22, 16)) >> 16)
--#define ANA_TABLES_STREAMTIDX_FORCE_SF_BEHAVIOUR          BIT(14)
--#define ANA_TABLES_STREAMTIDX_SEQ_HISTORY_LEN(x)          (((x) << 8) & GENMASK(13, 8))
--#define ANA_TABLES_STREAMTIDX_SEQ_HISTORY_LEN_M           GENMASK(13, 8)
--#define ANA_TABLES_STREAMTIDX_SEQ_HISTORY_LEN_X(x)        (((x) & GENMASK(13, 8)) >> 8)
--#define ANA_TABLES_STREAMTIDX_RESET_ON_ROGUE              BIT(7)
--#define ANA_TABLES_STREAMTIDX_REDTAG_POP                  BIT(6)
--#define ANA_TABLES_STREAMTIDX_STREAM_SPLIT                BIT(5)
--#define ANA_TABLES_STREAMTIDX_SEQ_SPACE_LOG2(x)           ((x) & GENMASK(4, 0))
--#define ANA_TABLES_STREAMTIDX_SEQ_SPACE_LOG2_M            GENMASK(4, 0)
--
--#define ANA_TABLES_SEQ_MASK_SPLIT_MASK(x)                 (((x) << 16) & GENMASK(22, 16))
--#define ANA_TABLES_SEQ_MASK_SPLIT_MASK_M                  GENMASK(22, 16)
--#define ANA_TABLES_SEQ_MASK_SPLIT_MASK_X(x)               (((x) & GENMASK(22, 16)) >> 16)
--#define ANA_TABLES_SEQ_MASK_INPUT_PORT_MASK(x)            ((x) & GENMASK(6, 0))
--#define ANA_TABLES_SEQ_MASK_INPUT_PORT_MASK_M             GENMASK(6, 0)
--
--#define ANA_TABLES_SFID_MASK_IGR_PORT_MASK(x)             (((x) << 1) & GENMASK(7, 1))
--#define ANA_TABLES_SFID_MASK_IGR_PORT_MASK_M              GENMASK(7, 1)
--#define ANA_TABLES_SFID_MASK_IGR_PORT_MASK_X(x)           (((x) & GENMASK(7, 1)) >> 1)
--#define ANA_TABLES_SFID_MASK_IGR_SRCPORT_MATCH_ENA        BIT(0)
--
--#define ANA_TABLES_SFIDACCESS_IGR_PRIO_MATCH_ENA          BIT(22)
--#define ANA_TABLES_SFIDACCESS_IGR_PRIO(x)                 (((x) << 19) & GENMASK(21, 19))
--#define ANA_TABLES_SFIDACCESS_IGR_PRIO_M                  GENMASK(21, 19)
--#define ANA_TABLES_SFIDACCESS_IGR_PRIO_X(x)               (((x) & GENMASK(21, 19)) >> 19)
--#define ANA_TABLES_SFIDACCESS_FORCE_BLOCK                 BIT(18)
--#define ANA_TABLES_SFIDACCESS_MAX_SDU_LEN(x)              (((x) << 2) & GENMASK(17, 2))
--#define ANA_TABLES_SFIDACCESS_MAX_SDU_LEN_M               GENMASK(17, 2)
--#define ANA_TABLES_SFIDACCESS_MAX_SDU_LEN_X(x)            (((x) & GENMASK(17, 2)) >> 2)
--#define ANA_TABLES_SFIDACCESS_SFID_TBL_CMD(x)             ((x) & GENMASK(1, 0))
--#define ANA_TABLES_SFIDACCESS_SFID_TBL_CMD_M              GENMASK(1, 0)
--
--#define SFIDACCESS_CMD_IDLE                             0
--#define SFIDACCESS_CMD_READ                             1
--#define SFIDACCESS_CMD_WRITE                            2
--#define SFIDACCESS_CMD_INIT				3
--
--#define ANA_TABLES_SFIDTIDX_SGID_VALID                    BIT(26)
--#define ANA_TABLES_SFIDTIDX_SGID(x)                       (((x) << 18) & GENMASK(25, 18))
--#define ANA_TABLES_SFIDTIDX_SGID_M                        GENMASK(25, 18)
--#define ANA_TABLES_SFIDTIDX_SGID_X(x)                     (((x) & GENMASK(25, 18)) >> 18)
--#define ANA_TABLES_SFIDTIDX_POL_ENA                       BIT(17)
--#define ANA_TABLES_SFIDTIDX_POL_IDX(x)                    (((x) << 8) & GENMASK(16, 8))
--#define ANA_TABLES_SFIDTIDX_POL_IDX_M                     GENMASK(16, 8)
--#define ANA_TABLES_SFIDTIDX_POL_IDX_X(x)                  (((x) & GENMASK(16, 8)) >> 8)
--#define ANA_TABLES_SFIDTIDX_SFID_INDEX(x)                 ((x) & GENMASK(7, 0))
--#define ANA_TABLES_SFIDTIDX_SFID_INDEX_M                  GENMASK(7, 0)
--
--#define ANA_MSTI_STATE_RSZ                                0x4
--
--#define ANA_OAM_UPM_LM_CNT_RSZ                            0x4
--
--#define ANA_SG_ACCESS_CTRL_SGID(x)                        ((x) & GENMASK(7, 0))
--#define ANA_SG_ACCESS_CTRL_SGID_M                         GENMASK(7, 0)
--#define ANA_SG_ACCESS_CTRL_CONFIG_CHANGE                  BIT(28)
--
--#define ANA_SG_CONFIG_REG_3_BASE_TIME_SEC_MSB(x)          ((x) & GENMASK(15, 0))
--#define ANA_SG_CONFIG_REG_3_BASE_TIME_SEC_MSB_M           GENMASK(15, 0)
--#define ANA_SG_CONFIG_REG_3_LIST_LENGTH(x)                (((x) << 16) & GENMASK(18, 16))
--#define ANA_SG_CONFIG_REG_3_LIST_LENGTH_M                 GENMASK(18, 16)
--#define ANA_SG_CONFIG_REG_3_LIST_LENGTH_X(x)              (((x) & GENMASK(18, 16)) >> 16)
--#define ANA_SG_CONFIG_REG_3_GATE_ENABLE                   BIT(20)
--#define ANA_SG_CONFIG_REG_3_INIT_IPS(x)                   (((x) << 21) & GENMASK(24, 21))
--#define ANA_SG_CONFIG_REG_3_INIT_IPS_M                    GENMASK(24, 21)
--#define ANA_SG_CONFIG_REG_3_INIT_IPS_X(x)                 (((x) & GENMASK(24, 21)) >> 21)
--#define ANA_SG_CONFIG_REG_3_IPV_VALID                     BIT(24)
--#define ANA_SG_CONFIG_REG_3_IPV_INVALID(x)		  (((x) << 24) & GENMASK(24, 24))
--#define ANA_SG_CONFIG_REG_3_INIT_IPV(x)                   (((x) << 21) & GENMASK(23, 21))
--#define ANA_SG_CONFIG_REG_3_INIT_IPV_M                    GENMASK(23, 21)
--#define ANA_SG_CONFIG_REG_3_INIT_IPV_X(x)                 (((x) & GENMASK(23, 21)) >> 21)
--#define ANA_SG_CONFIG_REG_3_INIT_GATE_STATE               BIT(25)
--
--#define ANA_SG_GCL_GS_CONFIG_RSZ                          0x4
--
--#define ANA_SG_GCL_GS_CONFIG_IPS(x)                       ((x) & GENMASK(3, 0))
--#define ANA_SG_GCL_GS_CONFIG_IPS_M                        GENMASK(3, 0)
--#define ANA_SG_GCL_GS_CONFIG_IPV_VALID                    BIT(3)
--#define ANA_SG_GCL_GS_CONFIG_IPV(x)                       ((x) & GENMASK(2, 0))
--#define ANA_SG_GCL_GS_CONFIG_IPV_M                        GENMASK(2, 0)
--#define ANA_SG_GCL_GS_CONFIG_GATE_STATE                   BIT(4)
--
--#define ANA_SG_GCL_TI_CONFIG_RSZ                          0x4
--
--#define ANA_SG_STATUS_REG_3_CFG_CHG_TIME_SEC_MSB(x)       ((x) & GENMASK(15, 0))
--#define ANA_SG_STATUS_REG_3_CFG_CHG_TIME_SEC_MSB_M        GENMASK(15, 0)
--#define ANA_SG_STATUS_REG_3_GATE_STATE                    BIT(16)
--#define ANA_SG_STATUS_REG_3_IPS(x)                        (((x) << 20) & GENMASK(23, 20))
--#define ANA_SG_STATUS_REG_3_IPS_M                         GENMASK(23, 20)
--#define ANA_SG_STATUS_REG_3_IPS_X(x)                      (((x) & GENMASK(23, 20)) >> 20)
--#define ANA_SG_STATUS_REG_3_IPV_VALID                     BIT(23)
--#define ANA_SG_STATUS_REG_3_IPV(x)                        (((x) << 20) & GENMASK(22, 20))
--#define ANA_SG_STATUS_REG_3_IPV_M                         GENMASK(22, 20)
--#define ANA_SG_STATUS_REG_3_IPV_X(x)                      (((x) & GENMASK(22, 20)) >> 20)
--#define ANA_SG_STATUS_REG_3_CONFIG_PENDING                BIT(24)
--
--#define ANA_PORT_VLAN_CFG_GSZ                             0x100
--
--#define ANA_PORT_VLAN_CFG_VLAN_VID_AS_ISDX                BIT(21)
--#define ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA                  BIT(20)
--#define ANA_PORT_VLAN_CFG_VLAN_POP_CNT(x)                 (((x) << 18) & GENMASK(19, 18))
--#define ANA_PORT_VLAN_CFG_VLAN_POP_CNT_M                  GENMASK(19, 18)
--#define ANA_PORT_VLAN_CFG_VLAN_POP_CNT_X(x)               (((x) & GENMASK(19, 18)) >> 18)
--#define ANA_PORT_VLAN_CFG_VLAN_INNER_TAG_ENA              BIT(17)
--#define ANA_PORT_VLAN_CFG_VLAN_TAG_TYPE                   BIT(16)
--#define ANA_PORT_VLAN_CFG_VLAN_DEI                        BIT(15)
--#define ANA_PORT_VLAN_CFG_VLAN_PCP(x)                     (((x) << 12) & GENMASK(14, 12))
--#define ANA_PORT_VLAN_CFG_VLAN_PCP_M                      GENMASK(14, 12)
--#define ANA_PORT_VLAN_CFG_VLAN_PCP_X(x)                   (((x) & GENMASK(14, 12)) >> 12)
--#define ANA_PORT_VLAN_CFG_VLAN_VID(x)                     ((x) & GENMASK(11, 0))
--#define ANA_PORT_VLAN_CFG_VLAN_VID_M                      GENMASK(11, 0)
--
--#define ANA_PORT_DROP_CFG_GSZ                             0x100
--
--#define ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA               BIT(6)
--#define ANA_PORT_DROP_CFG_DROP_S_TAGGED_ENA               BIT(5)
--#define ANA_PORT_DROP_CFG_DROP_C_TAGGED_ENA               BIT(4)
--#define ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA          BIT(3)
--#define ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA          BIT(2)
--#define ANA_PORT_DROP_CFG_DROP_NULL_MAC_ENA               BIT(1)
--#define ANA_PORT_DROP_CFG_DROP_MC_SMAC_ENA                BIT(0)
--
--#define ANA_PORT_QOS_CFG_GSZ                              0x100
--
--#define ANA_PORT_QOS_CFG_DP_DEFAULT_VAL                   BIT(8)
--#define ANA_PORT_QOS_CFG_QOS_DEFAULT_VAL(x)               (((x) << 5) & GENMASK(7, 5))
--#define ANA_PORT_QOS_CFG_QOS_DEFAULT_VAL_M                GENMASK(7, 5)
--#define ANA_PORT_QOS_CFG_QOS_DEFAULT_VAL_X(x)             (((x) & GENMASK(7, 5)) >> 5)
--#define ANA_PORT_QOS_CFG_QOS_DSCP_ENA                     BIT(4)
--#define ANA_PORT_QOS_CFG_QOS_PCP_ENA                      BIT(3)
--#define ANA_PORT_QOS_CFG_DSCP_TRANSLATE_ENA               BIT(2)
--#define ANA_PORT_QOS_CFG_DSCP_REWR_CFG(x)                 ((x) & GENMASK(1, 0))
--#define ANA_PORT_QOS_CFG_DSCP_REWR_CFG_M                  GENMASK(1, 0)
--
--#define ANA_PORT_VCAP_CFG_GSZ                             0x100
--
--#define ANA_PORT_VCAP_CFG_S1_ENA                          BIT(14)
--#define ANA_PORT_VCAP_CFG_S1_DMAC_DIP_ENA(x)              (((x) << 11) & GENMASK(13, 11))
--#define ANA_PORT_VCAP_CFG_S1_DMAC_DIP_ENA_M               GENMASK(13, 11)
--#define ANA_PORT_VCAP_CFG_S1_DMAC_DIP_ENA_X(x)            (((x) & GENMASK(13, 11)) >> 11)
--#define ANA_PORT_VCAP_CFG_S1_VLAN_INNER_TAG_ENA(x)        (((x) << 8) & GENMASK(10, 8))
--#define ANA_PORT_VCAP_CFG_S1_VLAN_INNER_TAG_ENA_M         GENMASK(10, 8)
--#define ANA_PORT_VCAP_CFG_S1_VLAN_INNER_TAG_ENA_X(x)      (((x) & GENMASK(10, 8)) >> 8)
--#define ANA_PORT_VCAP_CFG_PAG_VAL(x)                      ((x) & GENMASK(7, 0))
--#define ANA_PORT_VCAP_CFG_PAG_VAL_M                       GENMASK(7, 0)
--
--#define ANA_PORT_VCAP_S1_KEY_CFG_GSZ                      0x100
--#define ANA_PORT_VCAP_S1_KEY_CFG_RSZ                      0x4
--
--#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_IP6_CFG(x)        (((x) << 4) & GENMASK(6, 4))
--#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_IP6_CFG_M         GENMASK(6, 4)
--#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_IP6_CFG_X(x)      (((x) & GENMASK(6, 4)) >> 4)
--#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_IP4_CFG(x)        (((x) << 2) & GENMASK(3, 2))
--#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_IP4_CFG_M         GENMASK(3, 2)
--#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_IP4_CFG_X(x)      (((x) & GENMASK(3, 2)) >> 2)
--#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_OTHER_CFG(x)      ((x) & GENMASK(1, 0))
--#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_OTHER_CFG_M       GENMASK(1, 0)
--
--#define ANA_PORT_VCAP_S2_CFG_GSZ                          0x100
--
--#define ANA_PORT_VCAP_S2_CFG_S2_UDP_PAYLOAD_ENA(x)        (((x) << 17) & GENMASK(18, 17))
--#define ANA_PORT_VCAP_S2_CFG_S2_UDP_PAYLOAD_ENA_M         GENMASK(18, 17)
--#define ANA_PORT_VCAP_S2_CFG_S2_UDP_PAYLOAD_ENA_X(x)      (((x) & GENMASK(18, 17)) >> 17)
--#define ANA_PORT_VCAP_S2_CFG_S2_ETYPE_PAYLOAD_ENA(x)      (((x) << 15) & GENMASK(16, 15))
--#define ANA_PORT_VCAP_S2_CFG_S2_ETYPE_PAYLOAD_ENA_M       GENMASK(16, 15)
--#define ANA_PORT_VCAP_S2_CFG_S2_ETYPE_PAYLOAD_ENA_X(x)    (((x) & GENMASK(16, 15)) >> 15)
--#define ANA_PORT_VCAP_S2_CFG_S2_ENA                       BIT(14)
--#define ANA_PORT_VCAP_S2_CFG_S2_SNAP_DIS(x)               (((x) << 12) & GENMASK(13, 12))
--#define ANA_PORT_VCAP_S2_CFG_S2_SNAP_DIS_M                GENMASK(13, 12)
--#define ANA_PORT_VCAP_S2_CFG_S2_SNAP_DIS_X(x)             (((x) & GENMASK(13, 12)) >> 12)
--#define ANA_PORT_VCAP_S2_CFG_S2_ARP_DIS(x)                (((x) << 10) & GENMASK(11, 10))
--#define ANA_PORT_VCAP_S2_CFG_S2_ARP_DIS_M                 GENMASK(11, 10)
--#define ANA_PORT_VCAP_S2_CFG_S2_ARP_DIS_X(x)              (((x) & GENMASK(11, 10)) >> 10)
--#define ANA_PORT_VCAP_S2_CFG_S2_IP_TCPUDP_DIS(x)          (((x) << 8) & GENMASK(9, 8))
--#define ANA_PORT_VCAP_S2_CFG_S2_IP_TCPUDP_DIS_M           GENMASK(9, 8)
--#define ANA_PORT_VCAP_S2_CFG_S2_IP_TCPUDP_DIS_X(x)        (((x) & GENMASK(9, 8)) >> 8)
--#define ANA_PORT_VCAP_S2_CFG_S2_IP_OTHER_DIS(x)           (((x) << 6) & GENMASK(7, 6))
--#define ANA_PORT_VCAP_S2_CFG_S2_IP_OTHER_DIS_M            GENMASK(7, 6)
--#define ANA_PORT_VCAP_S2_CFG_S2_IP_OTHER_DIS_X(x)         (((x) & GENMASK(7, 6)) >> 6)
--#define ANA_PORT_VCAP_S2_CFG_S2_IP6_CFG(x)                (((x) << 2) & GENMASK(5, 2))
--#define ANA_PORT_VCAP_S2_CFG_S2_IP6_CFG_M                 GENMASK(5, 2)
--#define ANA_PORT_VCAP_S2_CFG_S2_IP6_CFG_X(x)              (((x) & GENMASK(5, 2)) >> 2)
--#define ANA_PORT_VCAP_S2_CFG_S2_OAM_DIS(x)                ((x) & GENMASK(1, 0))
--#define ANA_PORT_VCAP_S2_CFG_S2_OAM_DIS_M                 GENMASK(1, 0)
--
--#define ANA_PORT_PCP_DEI_MAP_GSZ                          0x100
--#define ANA_PORT_PCP_DEI_MAP_RSZ                          0x4
--
--#define ANA_PORT_PCP_DEI_MAP_DP_PCP_DEI_VAL               BIT(3)
--#define ANA_PORT_PCP_DEI_MAP_QOS_PCP_DEI_VAL(x)           ((x) & GENMASK(2, 0))
--#define ANA_PORT_PCP_DEI_MAP_QOS_PCP_DEI_VAL_M            GENMASK(2, 0)
--
--#define ANA_PORT_CPU_FWD_CFG_GSZ                          0x100
--
--#define ANA_PORT_CPU_FWD_CFG_CPU_VRAP_REDIR_ENA           BIT(7)
--#define ANA_PORT_CPU_FWD_CFG_CPU_MLD_REDIR_ENA            BIT(6)
--#define ANA_PORT_CPU_FWD_CFG_CPU_IGMP_REDIR_ENA           BIT(5)
--#define ANA_PORT_CPU_FWD_CFG_CPU_IPMC_CTRL_COPY_ENA       BIT(4)
--#define ANA_PORT_CPU_FWD_CFG_CPU_SRC_COPY_ENA             BIT(3)
--#define ANA_PORT_CPU_FWD_CFG_CPU_ALLBRIDGE_DROP_ENA       BIT(2)
--#define ANA_PORT_CPU_FWD_CFG_CPU_ALLBRIDGE_REDIR_ENA      BIT(1)
--#define ANA_PORT_CPU_FWD_CFG_CPU_OAM_ENA                  BIT(0)
--
--#define ANA_PORT_CPU_FWD_BPDU_CFG_GSZ                     0x100
--
--#define ANA_PORT_CPU_FWD_BPDU_CFG_BPDU_DROP_ENA(x)        (((x) << 16) & GENMASK(31, 16))
--#define ANA_PORT_CPU_FWD_BPDU_CFG_BPDU_DROP_ENA_M         GENMASK(31, 16)
--#define ANA_PORT_CPU_FWD_BPDU_CFG_BPDU_DROP_ENA_X(x)      (((x) & GENMASK(31, 16)) >> 16)
--#define ANA_PORT_CPU_FWD_BPDU_CFG_BPDU_REDIR_ENA(x)       ((x) & GENMASK(15, 0))
--#define ANA_PORT_CPU_FWD_BPDU_CFG_BPDU_REDIR_ENA_M        GENMASK(15, 0)
--
--#define ANA_PORT_CPU_FWD_GARP_CFG_GSZ                     0x100
--
--#define ANA_PORT_CPU_FWD_GARP_CFG_GARP_DROP_ENA(x)        (((x) << 16) & GENMASK(31, 16))
--#define ANA_PORT_CPU_FWD_GARP_CFG_GARP_DROP_ENA_M         GENMASK(31, 16)
--#define ANA_PORT_CPU_FWD_GARP_CFG_GARP_DROP_ENA_X(x)      (((x) & GENMASK(31, 16)) >> 16)
--#define ANA_PORT_CPU_FWD_GARP_CFG_GARP_REDIR_ENA(x)       ((x) & GENMASK(15, 0))
--#define ANA_PORT_CPU_FWD_GARP_CFG_GARP_REDIR_ENA_M        GENMASK(15, 0)
--
--#define ANA_PORT_CPU_FWD_CCM_CFG_GSZ                      0x100
--
--#define ANA_PORT_CPU_FWD_CCM_CFG_CCM_DROP_ENA(x)          (((x) << 16) & GENMASK(31, 16))
--#define ANA_PORT_CPU_FWD_CCM_CFG_CCM_DROP_ENA_M           GENMASK(31, 16)
--#define ANA_PORT_CPU_FWD_CCM_CFG_CCM_DROP_ENA_X(x)        (((x) & GENMASK(31, 16)) >> 16)
--#define ANA_PORT_CPU_FWD_CCM_CFG_CCM_REDIR_ENA(x)         ((x) & GENMASK(15, 0))
--#define ANA_PORT_CPU_FWD_CCM_CFG_CCM_REDIR_ENA_M          GENMASK(15, 0)
--
--#define ANA_PORT_PORT_CFG_GSZ                             0x100
--
--#define ANA_PORT_PORT_CFG_SRC_MIRROR_ENA                  BIT(15)
--#define ANA_PORT_PORT_CFG_LIMIT_DROP                      BIT(14)
--#define ANA_PORT_PORT_CFG_LIMIT_CPU                       BIT(13)
--#define ANA_PORT_PORT_CFG_LOCKED_PORTMOVE_DROP            BIT(12)
--#define ANA_PORT_PORT_CFG_LOCKED_PORTMOVE_CPU             BIT(11)
--#define ANA_PORT_PORT_CFG_LEARNDROP                       BIT(10)
--#define ANA_PORT_PORT_CFG_LEARNCPU                        BIT(9)
--#define ANA_PORT_PORT_CFG_LEARNAUTO                       BIT(8)
--#define ANA_PORT_PORT_CFG_LEARN_ENA                       BIT(7)
--#define ANA_PORT_PORT_CFG_RECV_ENA                        BIT(6)
--#define ANA_PORT_PORT_CFG_PORTID_VAL(x)                   (((x) << 2) & GENMASK(5, 2))
--#define ANA_PORT_PORT_CFG_PORTID_VAL_M                    GENMASK(5, 2)
--#define ANA_PORT_PORT_CFG_PORTID_VAL_X(x)                 (((x) & GENMASK(5, 2)) >> 2)
--#define ANA_PORT_PORT_CFG_USE_B_DOM_TBL                   BIT(1)
--#define ANA_PORT_PORT_CFG_LSR_MODE                        BIT(0)
--
--#define ANA_PORT_POL_CFG_GSZ                              0x100
--
--#define ANA_PORT_POL_CFG_POL_CPU_REDIR_8021               BIT(19)
--#define ANA_PORT_POL_CFG_POL_CPU_REDIR_IP                 BIT(18)
--#define ANA_PORT_POL_CFG_PORT_POL_ENA                     BIT(17)
--#define ANA_PORT_POL_CFG_QUEUE_POL_ENA(x)                 (((x) << 9) & GENMASK(16, 9))
--#define ANA_PORT_POL_CFG_QUEUE_POL_ENA_M                  GENMASK(16, 9)
--#define ANA_PORT_POL_CFG_QUEUE_POL_ENA_X(x)               (((x) & GENMASK(16, 9)) >> 9)
--#define ANA_PORT_POL_CFG_POL_ORDER(x)                     ((x) & GENMASK(8, 0))
--#define ANA_PORT_POL_CFG_POL_ORDER_M                      GENMASK(8, 0)
--
--#define ANA_PORT_PTP_CFG_GSZ                              0x100
--
--#define ANA_PORT_PTP_CFG_PTP_BACKPLANE_MODE               BIT(0)
--
--#define ANA_PORT_PTP_DLY1_CFG_GSZ                         0x100
--
--#define ANA_PORT_PTP_DLY2_CFG_GSZ                         0x100
--
--#define ANA_PORT_SFID_CFG_GSZ                             0x100
--#define ANA_PORT_SFID_CFG_RSZ                             0x4
--
--#define ANA_PORT_SFID_CFG_SFID_VALID                      BIT(8)
--#define ANA_PORT_SFID_CFG_SFID(x)                         ((x) & GENMASK(7, 0))
--#define ANA_PORT_SFID_CFG_SFID_M                          GENMASK(7, 0)
--
--#define ANA_PFC_PFC_CFG_GSZ                               0x40
--
--#define ANA_PFC_PFC_CFG_RX_PFC_ENA(x)                     (((x) << 2) & GENMASK(9, 2))
--#define ANA_PFC_PFC_CFG_RX_PFC_ENA_M                      GENMASK(9, 2)
--#define ANA_PFC_PFC_CFG_RX_PFC_ENA_X(x)                   (((x) & GENMASK(9, 2)) >> 2)
--#define ANA_PFC_PFC_CFG_FC_LINK_SPEED(x)                  ((x) & GENMASK(1, 0))
--#define ANA_PFC_PFC_CFG_FC_LINK_SPEED_M                   GENMASK(1, 0)
--
--#define ANA_PFC_PFC_TIMER_GSZ                             0x40
--#define ANA_PFC_PFC_TIMER_RSZ                             0x4
--
--#define ANA_IPT_OAM_MEP_CFG_GSZ                           0x8
--
--#define ANA_IPT_OAM_MEP_CFG_MEP_IDX_P(x)                  (((x) << 6) & GENMASK(10, 6))
--#define ANA_IPT_OAM_MEP_CFG_MEP_IDX_P_M                   GENMASK(10, 6)
--#define ANA_IPT_OAM_MEP_CFG_MEP_IDX_P_X(x)                (((x) & GENMASK(10, 6)) >> 6)
--#define ANA_IPT_OAM_MEP_CFG_MEP_IDX(x)                    (((x) << 1) & GENMASK(5, 1))
--#define ANA_IPT_OAM_MEP_CFG_MEP_IDX_M                     GENMASK(5, 1)
--#define ANA_IPT_OAM_MEP_CFG_MEP_IDX_X(x)                  (((x) & GENMASK(5, 1)) >> 1)
--#define ANA_IPT_OAM_MEP_CFG_MEP_IDX_ENA                   BIT(0)
--
--#define ANA_IPT_IPT_GSZ                                   0x8
--
--#define ANA_IPT_IPT_IPT_CFG(x)                            (((x) << 15) & GENMASK(16, 15))
--#define ANA_IPT_IPT_IPT_CFG_M                             GENMASK(16, 15)
--#define ANA_IPT_IPT_IPT_CFG_X(x)                          (((x) & GENMASK(16, 15)) >> 15)
--#define ANA_IPT_IPT_ISDX_P(x)                             (((x) << 7) & GENMASK(14, 7))
--#define ANA_IPT_IPT_ISDX_P_M                              GENMASK(14, 7)
--#define ANA_IPT_IPT_ISDX_P_X(x)                           (((x) & GENMASK(14, 7)) >> 7)
--#define ANA_IPT_IPT_PPT_IDX(x)                            ((x) & GENMASK(6, 0))
--#define ANA_IPT_IPT_PPT_IDX_M                             GENMASK(6, 0)
--
--#define ANA_PPT_PPT_RSZ                                   0x4
--
--#define ANA_FID_MAP_FID_MAP_RSZ                           0x4
--
--#define ANA_FID_MAP_FID_MAP_FID_C_VAL(x)                  (((x) << 6) & GENMASK(11, 6))
--#define ANA_FID_MAP_FID_MAP_FID_C_VAL_M                   GENMASK(11, 6)
--#define ANA_FID_MAP_FID_MAP_FID_C_VAL_X(x)                (((x) & GENMASK(11, 6)) >> 6)
--#define ANA_FID_MAP_FID_MAP_FID_B_VAL(x)                  ((x) & GENMASK(5, 0))
--#define ANA_FID_MAP_FID_MAP_FID_B_VAL_M                   GENMASK(5, 0)
--
--#define ANA_AGGR_CFG_AC_RND_ENA                           BIT(7)
--#define ANA_AGGR_CFG_AC_DMAC_ENA                          BIT(6)
--#define ANA_AGGR_CFG_AC_SMAC_ENA                          BIT(5)
--#define ANA_AGGR_CFG_AC_IP6_FLOW_LBL_ENA                  BIT(4)
--#define ANA_AGGR_CFG_AC_IP6_TCPUDP_ENA                    BIT(3)
--#define ANA_AGGR_CFG_AC_IP4_SIPDIP_ENA                    BIT(2)
--#define ANA_AGGR_CFG_AC_IP4_TCPUDP_ENA                    BIT(1)
--#define ANA_AGGR_CFG_AC_ISDX_ENA                          BIT(0)
--
--#define ANA_CPUQ_CFG_CPUQ_MLD(x)                          (((x) << 27) & GENMASK(29, 27))
--#define ANA_CPUQ_CFG_CPUQ_MLD_M                           GENMASK(29, 27)
--#define ANA_CPUQ_CFG_CPUQ_MLD_X(x)                        (((x) & GENMASK(29, 27)) >> 27)
--#define ANA_CPUQ_CFG_CPUQ_IGMP(x)                         (((x) << 24) & GENMASK(26, 24))
--#define ANA_CPUQ_CFG_CPUQ_IGMP_M                          GENMASK(26, 24)
--#define ANA_CPUQ_CFG_CPUQ_IGMP_X(x)                       (((x) & GENMASK(26, 24)) >> 24)
--#define ANA_CPUQ_CFG_CPUQ_IPMC_CTRL(x)                    (((x) << 21) & GENMASK(23, 21))
--#define ANA_CPUQ_CFG_CPUQ_IPMC_CTRL_M                     GENMASK(23, 21)
--#define ANA_CPUQ_CFG_CPUQ_IPMC_CTRL_X(x)                  (((x) & GENMASK(23, 21)) >> 21)
--#define ANA_CPUQ_CFG_CPUQ_ALLBRIDGE(x)                    (((x) << 18) & GENMASK(20, 18))
--#define ANA_CPUQ_CFG_CPUQ_ALLBRIDGE_M                     GENMASK(20, 18)
--#define ANA_CPUQ_CFG_CPUQ_ALLBRIDGE_X(x)                  (((x) & GENMASK(20, 18)) >> 18)
--#define ANA_CPUQ_CFG_CPUQ_LOCKED_PORTMOVE(x)              (((x) << 15) & GENMASK(17, 15))
--#define ANA_CPUQ_CFG_CPUQ_LOCKED_PORTMOVE_M               GENMASK(17, 15)
--#define ANA_CPUQ_CFG_CPUQ_LOCKED_PORTMOVE_X(x)            (((x) & GENMASK(17, 15)) >> 15)
--#define ANA_CPUQ_CFG_CPUQ_SRC_COPY(x)                     (((x) << 12) & GENMASK(14, 12))
--#define ANA_CPUQ_CFG_CPUQ_SRC_COPY_M                      GENMASK(14, 12)
--#define ANA_CPUQ_CFG_CPUQ_SRC_COPY_X(x)                   (((x) & GENMASK(14, 12)) >> 12)
--#define ANA_CPUQ_CFG_CPUQ_MAC_COPY(x)                     (((x) << 9) & GENMASK(11, 9))
--#define ANA_CPUQ_CFG_CPUQ_MAC_COPY_M                      GENMASK(11, 9)
--#define ANA_CPUQ_CFG_CPUQ_MAC_COPY_X(x)                   (((x) & GENMASK(11, 9)) >> 9)
--#define ANA_CPUQ_CFG_CPUQ_LRN(x)                          (((x) << 6) & GENMASK(8, 6))
--#define ANA_CPUQ_CFG_CPUQ_LRN_M                           GENMASK(8, 6)
--#define ANA_CPUQ_CFG_CPUQ_LRN_X(x)                        (((x) & GENMASK(8, 6)) >> 6)
--#define ANA_CPUQ_CFG_CPUQ_MIRROR(x)                       (((x) << 3) & GENMASK(5, 3))
--#define ANA_CPUQ_CFG_CPUQ_MIRROR_M                        GENMASK(5, 3)
--#define ANA_CPUQ_CFG_CPUQ_MIRROR_X(x)                     (((x) & GENMASK(5, 3)) >> 3)
--#define ANA_CPUQ_CFG_CPUQ_SFLOW(x)                        ((x) & GENMASK(2, 0))
--#define ANA_CPUQ_CFG_CPUQ_SFLOW_M                         GENMASK(2, 0)
--
--#define ANA_CPUQ_8021_CFG_RSZ                             0x4
--
--#define ANA_CPUQ_8021_CFG_CPUQ_BPDU_VAL(x)                (((x) << 6) & GENMASK(8, 6))
--#define ANA_CPUQ_8021_CFG_CPUQ_BPDU_VAL_M                 GENMASK(8, 6)
--#define ANA_CPUQ_8021_CFG_CPUQ_BPDU_VAL_X(x)              (((x) & GENMASK(8, 6)) >> 6)
--#define ANA_CPUQ_8021_CFG_CPUQ_GARP_VAL(x)                (((x) << 3) & GENMASK(5, 3))
--#define ANA_CPUQ_8021_CFG_CPUQ_GARP_VAL_M                 GENMASK(5, 3)
--#define ANA_CPUQ_8021_CFG_CPUQ_GARP_VAL_X(x)              (((x) & GENMASK(5, 3)) >> 3)
--#define ANA_CPUQ_8021_CFG_CPUQ_CCM_VAL(x)                 ((x) & GENMASK(2, 0))
--#define ANA_CPUQ_8021_CFG_CPUQ_CCM_VAL_M                  GENMASK(2, 0)
--
--#define ANA_DSCP_CFG_RSZ                                  0x4
--
--#define ANA_DSCP_CFG_DP_DSCP_VAL                          BIT(11)
--#define ANA_DSCP_CFG_QOS_DSCP_VAL(x)                      (((x) << 8) & GENMASK(10, 8))
--#define ANA_DSCP_CFG_QOS_DSCP_VAL_M                       GENMASK(10, 8)
--#define ANA_DSCP_CFG_QOS_DSCP_VAL_X(x)                    (((x) & GENMASK(10, 8)) >> 8)
--#define ANA_DSCP_CFG_DSCP_TRANSLATE_VAL(x)                (((x) << 2) & GENMASK(7, 2))
--#define ANA_DSCP_CFG_DSCP_TRANSLATE_VAL_M                 GENMASK(7, 2)
--#define ANA_DSCP_CFG_DSCP_TRANSLATE_VAL_X(x)              (((x) & GENMASK(7, 2)) >> 2)
--#define ANA_DSCP_CFG_DSCP_TRUST_ENA                       BIT(1)
--#define ANA_DSCP_CFG_DSCP_REWR_ENA                        BIT(0)
--
--#define ANA_DSCP_REWR_CFG_RSZ                             0x4
--
--#define ANA_VCAP_RNG_TYPE_CFG_RSZ                         0x4
--
--#define ANA_VCAP_RNG_VAL_CFG_RSZ                          0x4
--
--#define ANA_VCAP_RNG_VAL_CFG_VCAP_RNG_MIN_VAL(x)          (((x) << 16) & GENMASK(31, 16))
--#define ANA_VCAP_RNG_VAL_CFG_VCAP_RNG_MIN_VAL_M           GENMASK(31, 16)
--#define ANA_VCAP_RNG_VAL_CFG_VCAP_RNG_MIN_VAL_X(x)        (((x) & GENMASK(31, 16)) >> 16)
--#define ANA_VCAP_RNG_VAL_CFG_VCAP_RNG_MAX_VAL(x)          ((x) & GENMASK(15, 0))
--#define ANA_VCAP_RNG_VAL_CFG_VCAP_RNG_MAX_VAL_M           GENMASK(15, 0)
--
--#define ANA_VRAP_CFG_VRAP_VLAN_AWARE_ENA                  BIT(12)
--#define ANA_VRAP_CFG_VRAP_VID(x)                          ((x) & GENMASK(11, 0))
--#define ANA_VRAP_CFG_VRAP_VID_M                           GENMASK(11, 0)
--
--#define ANA_DISCARD_CFG_DROP_TAGGING_ISDX0                BIT(3)
--#define ANA_DISCARD_CFG_DROP_CTRLPROT_ISDX0               BIT(2)
--#define ANA_DISCARD_CFG_DROP_TAGGING_S2_ENA               BIT(1)
--#define ANA_DISCARD_CFG_DROP_CTRLPROT_S2_ENA              BIT(0)
--
--#define ANA_FID_CFG_VID_MC_ENA                            BIT(0)
--
--#define ANA_POL_PIR_CFG_GSZ                               0x20
--
--#define ANA_POL_PIR_CFG_PIR_RATE(x)                       (((x) << 6) & GENMASK(20, 6))
--#define ANA_POL_PIR_CFG_PIR_RATE_M                        GENMASK(20, 6)
--#define ANA_POL_PIR_CFG_PIR_RATE_X(x)                     (((x) & GENMASK(20, 6)) >> 6)
--#define ANA_POL_PIR_CFG_PIR_BURST(x)                      ((x) & GENMASK(5, 0))
--#define ANA_POL_PIR_CFG_PIR_BURST_M                       GENMASK(5, 0)
--
--#define ANA_POL_CIR_CFG_GSZ                               0x20
--
--#define ANA_POL_CIR_CFG_CIR_RATE(x)                       (((x) << 6) & GENMASK(20, 6))
--#define ANA_POL_CIR_CFG_CIR_RATE_M                        GENMASK(20, 6)
--#define ANA_POL_CIR_CFG_CIR_RATE_X(x)                     (((x) & GENMASK(20, 6)) >> 6)
--#define ANA_POL_CIR_CFG_CIR_BURST(x)                      ((x) & GENMASK(5, 0))
--#define ANA_POL_CIR_CFG_CIR_BURST_M                       GENMASK(5, 0)
--
--#define ANA_POL_MODE_CFG_GSZ                              0x20
--
--#define ANA_POL_MODE_CFG_IPG_SIZE(x)                      (((x) << 5) & GENMASK(9, 5))
--#define ANA_POL_MODE_CFG_IPG_SIZE_M                       GENMASK(9, 5)
--#define ANA_POL_MODE_CFG_IPG_SIZE_X(x)                    (((x) & GENMASK(9, 5)) >> 5)
--#define ANA_POL_MODE_CFG_FRM_MODE(x)                      (((x) << 3) & GENMASK(4, 3))
--#define ANA_POL_MODE_CFG_FRM_MODE_M                       GENMASK(4, 3)
--#define ANA_POL_MODE_CFG_FRM_MODE_X(x)                    (((x) & GENMASK(4, 3)) >> 3)
--#define ANA_POL_MODE_CFG_DLB_COUPLED                      BIT(2)
--#define ANA_POL_MODE_CFG_CIR_ENA                          BIT(1)
--#define ANA_POL_MODE_CFG_OVERSHOOT_ENA                    BIT(0)
--
--#define ANA_POL_PIR_STATE_GSZ                             0x20
--
--#define ANA_POL_CIR_STATE_GSZ                             0x20
--
--#define ANA_POL_STATE_GSZ                                 0x20
--
--#define ANA_POL_FLOWC_RSZ                                 0x4
--
--#define ANA_POL_FLOWC_POL_FLOWC                           BIT(0)
--
--#define ANA_POL_HYST_POL_FC_HYST(x)                       (((x) << 4) & GENMASK(9, 4))
--#define ANA_POL_HYST_POL_FC_HYST_M                        GENMASK(9, 4)
--#define ANA_POL_HYST_POL_FC_HYST_X(x)                     (((x) & GENMASK(9, 4)) >> 4)
--#define ANA_POL_HYST_POL_STOP_HYST(x)                     ((x) & GENMASK(3, 0))
--#define ANA_POL_HYST_POL_STOP_HYST_M                      GENMASK(3, 0)
--
--#define ANA_POL_MISC_CFG_POL_CLOSE_ALL                    BIT(1)
--#define ANA_POL_MISC_CFG_POL_LEAK_DIS                     BIT(0)
--
--#endif
---- a/drivers/net/ethernet/mscc/ocelot_dev.h
-+++ /dev/null
-@@ -1,275 +0,0 @@
--/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
--/*
-- * Microsemi Ocelot Switch driver
-- *
-- * Copyright (c) 2017 Microsemi Corporation
-- */
--
--#ifndef _MSCC_OCELOT_DEV_H_
--#define _MSCC_OCELOT_DEV_H_
--
--#define DEV_CLOCK_CFG                                     0x0
--
--#define DEV_CLOCK_CFG_MAC_TX_RST                          BIT(7)
--#define DEV_CLOCK_CFG_MAC_RX_RST                          BIT(6)
--#define DEV_CLOCK_CFG_PCS_TX_RST                          BIT(5)
--#define DEV_CLOCK_CFG_PCS_RX_RST                          BIT(4)
--#define DEV_CLOCK_CFG_PORT_RST                            BIT(3)
--#define DEV_CLOCK_CFG_PHY_RST                             BIT(2)
--#define DEV_CLOCK_CFG_LINK_SPEED(x)                       ((x) & GENMASK(1, 0))
--#define DEV_CLOCK_CFG_LINK_SPEED_M                        GENMASK(1, 0)
--
--#define DEV_PORT_MISC                                     0x4
--
--#define DEV_PORT_MISC_FWD_ERROR_ENA                       BIT(4)
--#define DEV_PORT_MISC_FWD_PAUSE_ENA                       BIT(3)
--#define DEV_PORT_MISC_FWD_CTRL_ENA                        BIT(2)
--#define DEV_PORT_MISC_DEV_LOOP_ENA                        BIT(1)
--#define DEV_PORT_MISC_HDX_FAST_DIS                        BIT(0)
--
--#define DEV_EVENTS                                        0x8
--
--#define DEV_EEE_CFG                                       0xc
--
--#define DEV_EEE_CFG_EEE_ENA                               BIT(22)
--#define DEV_EEE_CFG_EEE_TIMER_AGE(x)                      (((x) << 15) & GENMASK(21, 15))
--#define DEV_EEE_CFG_EEE_TIMER_AGE_M                       GENMASK(21, 15)
--#define DEV_EEE_CFG_EEE_TIMER_AGE_X(x)                    (((x) & GENMASK(21, 15)) >> 15)
--#define DEV_EEE_CFG_EEE_TIMER_WAKEUP(x)                   (((x) << 8) & GENMASK(14, 8))
--#define DEV_EEE_CFG_EEE_TIMER_WAKEUP_M                    GENMASK(14, 8)
--#define DEV_EEE_CFG_EEE_TIMER_WAKEUP_X(x)                 (((x) & GENMASK(14, 8)) >> 8)
--#define DEV_EEE_CFG_EEE_TIMER_HOLDOFF(x)                  (((x) << 1) & GENMASK(7, 1))
--#define DEV_EEE_CFG_EEE_TIMER_HOLDOFF_M                   GENMASK(7, 1)
--#define DEV_EEE_CFG_EEE_TIMER_HOLDOFF_X(x)                (((x) & GENMASK(7, 1)) >> 1)
--#define DEV_EEE_CFG_PORT_LPI                              BIT(0)
--
--#define DEV_RX_PATH_DELAY                                 0x10
--
--#define DEV_TX_PATH_DELAY                                 0x14
--
--#define DEV_PTP_PREDICT_CFG                               0x18
--
--#define DEV_PTP_PREDICT_CFG_PTP_PHY_PREDICT_CFG(x)        (((x) << 4) & GENMASK(11, 4))
--#define DEV_PTP_PREDICT_CFG_PTP_PHY_PREDICT_CFG_M         GENMASK(11, 4)
--#define DEV_PTP_PREDICT_CFG_PTP_PHY_PREDICT_CFG_X(x)      (((x) & GENMASK(11, 4)) >> 4)
--#define DEV_PTP_PREDICT_CFG_PTP_PHASE_PREDICT_CFG(x)      ((x) & GENMASK(3, 0))
--#define DEV_PTP_PREDICT_CFG_PTP_PHASE_PREDICT_CFG_M       GENMASK(3, 0)
--
--#define DEV_MAC_ENA_CFG                                   0x1c
--
--#define DEV_MAC_ENA_CFG_RX_ENA                            BIT(4)
--#define DEV_MAC_ENA_CFG_TX_ENA                            BIT(0)
--
--#define DEV_MAC_MODE_CFG                                  0x20
--
--#define DEV_MAC_MODE_CFG_FC_WORD_SYNC_ENA                 BIT(8)
--#define DEV_MAC_MODE_CFG_GIGA_MODE_ENA                    BIT(4)
--#define DEV_MAC_MODE_CFG_FDX_ENA                          BIT(0)
--
--#define DEV_MAC_MAXLEN_CFG                                0x24
--
--#define DEV_MAC_TAGS_CFG                                  0x28
--
--#define DEV_MAC_TAGS_CFG_TAG_ID(x)                        (((x) << 16) & GENMASK(31, 16))
--#define DEV_MAC_TAGS_CFG_TAG_ID_M                         GENMASK(31, 16)
--#define DEV_MAC_TAGS_CFG_TAG_ID_X(x)                      (((x) & GENMASK(31, 16)) >> 16)
--#define DEV_MAC_TAGS_CFG_VLAN_LEN_AWR_ENA                 BIT(2)
--#define DEV_MAC_TAGS_CFG_PB_ENA                           BIT(1)
--#define DEV_MAC_TAGS_CFG_VLAN_AWR_ENA                     BIT(0)
--
--#define DEV_MAC_ADV_CHK_CFG                               0x2c
--
--#define DEV_MAC_ADV_CHK_CFG_LEN_DROP_ENA                  BIT(0)
--
--#define DEV_MAC_IFG_CFG                                   0x30
--
--#define DEV_MAC_IFG_CFG_RESTORE_OLD_IPG_CHECK             BIT(17)
--#define DEV_MAC_IFG_CFG_REDUCED_TX_IFG                    BIT(16)
--#define DEV_MAC_IFG_CFG_TX_IFG(x)                         (((x) << 8) & GENMASK(12, 8))
--#define DEV_MAC_IFG_CFG_TX_IFG_M                          GENMASK(12, 8)
--#define DEV_MAC_IFG_CFG_TX_IFG_X(x)                       (((x) & GENMASK(12, 8)) >> 8)
--#define DEV_MAC_IFG_CFG_RX_IFG2(x)                        (((x) << 4) & GENMASK(7, 4))
--#define DEV_MAC_IFG_CFG_RX_IFG2_M                         GENMASK(7, 4)
--#define DEV_MAC_IFG_CFG_RX_IFG2_X(x)                      (((x) & GENMASK(7, 4)) >> 4)
--#define DEV_MAC_IFG_CFG_RX_IFG1(x)                        ((x) & GENMASK(3, 0))
--#define DEV_MAC_IFG_CFG_RX_IFG1_M                         GENMASK(3, 0)
--
--#define DEV_MAC_HDX_CFG                                   0x34
--
--#define DEV_MAC_HDX_CFG_BYPASS_COL_SYNC                   BIT(26)
--#define DEV_MAC_HDX_CFG_OB_ENA                            BIT(25)
--#define DEV_MAC_HDX_CFG_WEXC_DIS                          BIT(24)
--#define DEV_MAC_HDX_CFG_SEED(x)                           (((x) << 16) & GENMASK(23, 16))
--#define DEV_MAC_HDX_CFG_SEED_M                            GENMASK(23, 16)
--#define DEV_MAC_HDX_CFG_SEED_X(x)                         (((x) & GENMASK(23, 16)) >> 16)
--#define DEV_MAC_HDX_CFG_SEED_LOAD                         BIT(12)
--#define DEV_MAC_HDX_CFG_RETRY_AFTER_EXC_COL_ENA           BIT(8)
--#define DEV_MAC_HDX_CFG_LATE_COL_POS(x)                   ((x) & GENMASK(6, 0))
--#define DEV_MAC_HDX_CFG_LATE_COL_POS_M                    GENMASK(6, 0)
--
--#define DEV_MAC_DBG_CFG                                   0x38
--
--#define DEV_MAC_DBG_CFG_TBI_MODE                          BIT(4)
--#define DEV_MAC_DBG_CFG_IFG_CRS_EXT_CHK_ENA               BIT(0)
--
--#define DEV_MAC_FC_MAC_LOW_CFG                            0x3c
--
--#define DEV_MAC_FC_MAC_HIGH_CFG                           0x40
--
--#define DEV_MAC_STICKY                                    0x44
--
--#define DEV_MAC_STICKY_RX_IPG_SHRINK_STICKY               BIT(9)
--#define DEV_MAC_STICKY_RX_PREAM_SHRINK_STICKY             BIT(8)
--#define DEV_MAC_STICKY_RX_CARRIER_EXT_STICKY              BIT(7)
--#define DEV_MAC_STICKY_RX_CARRIER_EXT_ERR_STICKY          BIT(6)
--#define DEV_MAC_STICKY_RX_JUNK_STICKY                     BIT(5)
--#define DEV_MAC_STICKY_TX_RETRANSMIT_STICKY               BIT(4)
--#define DEV_MAC_STICKY_TX_JAM_STICKY                      BIT(3)
--#define DEV_MAC_STICKY_TX_FIFO_OFLW_STICKY                BIT(2)
--#define DEV_MAC_STICKY_TX_FRM_LEN_OVR_STICKY              BIT(1)
--#define DEV_MAC_STICKY_TX_ABORT_STICKY                    BIT(0)
--
--#define PCS1G_CFG                                         0x48
--
--#define PCS1G_CFG_LINK_STATUS_TYPE                        BIT(4)
--#define PCS1G_CFG_AN_LINK_CTRL_ENA                        BIT(1)
--#define PCS1G_CFG_PCS_ENA                                 BIT(0)
--
--#define PCS1G_MODE_CFG                                    0x4c
--
--#define PCS1G_MODE_CFG_UNIDIR_MODE_ENA                    BIT(4)
--#define PCS1G_MODE_CFG_SGMII_MODE_ENA                     BIT(0)
--
--#define PCS1G_SD_CFG                                      0x50
--
--#define PCS1G_SD_CFG_SD_SEL                               BIT(8)
--#define PCS1G_SD_CFG_SD_POL                               BIT(4)
--#define PCS1G_SD_CFG_SD_ENA                               BIT(0)
--
--#define PCS1G_ANEG_CFG                                    0x54
--
--#define PCS1G_ANEG_CFG_ADV_ABILITY(x)                     (((x) << 16) & GENMASK(31, 16))
--#define PCS1G_ANEG_CFG_ADV_ABILITY_M                      GENMASK(31, 16)
--#define PCS1G_ANEG_CFG_ADV_ABILITY_X(x)                   (((x) & GENMASK(31, 16)) >> 16)
--#define PCS1G_ANEG_CFG_SW_RESOLVE_ENA                     BIT(8)
--#define PCS1G_ANEG_CFG_ANEG_RESTART_ONE_SHOT              BIT(1)
--#define PCS1G_ANEG_CFG_ANEG_ENA                           BIT(0)
--
--#define PCS1G_ANEG_NP_CFG                                 0x58
--
--#define PCS1G_ANEG_NP_CFG_NP_TX(x)                        (((x) << 16) & GENMASK(31, 16))
--#define PCS1G_ANEG_NP_CFG_NP_TX_M                         GENMASK(31, 16)
--#define PCS1G_ANEG_NP_CFG_NP_TX_X(x)                      (((x) & GENMASK(31, 16)) >> 16)
--#define PCS1G_ANEG_NP_CFG_NP_LOADED_ONE_SHOT              BIT(0)
--
--#define PCS1G_LB_CFG                                      0x5c
--
--#define PCS1G_LB_CFG_RA_ENA                               BIT(4)
--#define PCS1G_LB_CFG_GMII_PHY_LB_ENA                      BIT(1)
--#define PCS1G_LB_CFG_TBI_HOST_LB_ENA                      BIT(0)
--
--#define PCS1G_DBG_CFG                                     0x60
--
--#define PCS1G_DBG_CFG_UDLT                                BIT(0)
--
--#define PCS1G_CDET_CFG                                    0x64
--
--#define PCS1G_CDET_CFG_CDET_ENA                           BIT(0)
--
--#define PCS1G_ANEG_STATUS                                 0x68
--
--#define PCS1G_ANEG_STATUS_LP_ADV_ABILITY(x)               (((x) << 16) & GENMASK(31, 16))
--#define PCS1G_ANEG_STATUS_LP_ADV_ABILITY_M                GENMASK(31, 16)
--#define PCS1G_ANEG_STATUS_LP_ADV_ABILITY_X(x)             (((x) & GENMASK(31, 16)) >> 16)
--#define PCS1G_ANEG_STATUS_PR                              BIT(4)
--#define PCS1G_ANEG_STATUS_PAGE_RX_STICKY                  BIT(3)
--#define PCS1G_ANEG_STATUS_ANEG_COMPLETE                   BIT(0)
--
--#define PCS1G_ANEG_NP_STATUS                              0x6c
--
--#define PCS1G_LINK_STATUS                                 0x70
--
--#define PCS1G_LINK_STATUS_DELAY_VAR(x)                    (((x) << 12) & GENMASK(15, 12))
--#define PCS1G_LINK_STATUS_DELAY_VAR_M                     GENMASK(15, 12)
--#define PCS1G_LINK_STATUS_DELAY_VAR_X(x)                  (((x) & GENMASK(15, 12)) >> 12)
--#define PCS1G_LINK_STATUS_SIGNAL_DETECT                   BIT(8)
--#define PCS1G_LINK_STATUS_LINK_STATUS                     BIT(4)
--#define PCS1G_LINK_STATUS_SYNC_STATUS                     BIT(0)
--
--#define PCS1G_LINK_DOWN_CNT                               0x74
--
--#define PCS1G_STICKY                                      0x78
--
--#define PCS1G_STICKY_LINK_DOWN_STICKY                     BIT(4)
--#define PCS1G_STICKY_OUT_OF_SYNC_STICKY                   BIT(0)
--
--#define PCS1G_DEBUG_STATUS                                0x7c
--
--#define PCS1G_LPI_CFG                                     0x80
--
--#define PCS1G_LPI_CFG_QSGMII_MS_SEL                       BIT(20)
--#define PCS1G_LPI_CFG_RX_LPI_OUT_DIS                      BIT(17)
--#define PCS1G_LPI_CFG_LPI_TESTMODE                        BIT(16)
--#define PCS1G_LPI_CFG_LPI_RX_WTIM(x)                      (((x) << 4) & GENMASK(5, 4))
--#define PCS1G_LPI_CFG_LPI_RX_WTIM_M                       GENMASK(5, 4)
--#define PCS1G_LPI_CFG_LPI_RX_WTIM_X(x)                    (((x) & GENMASK(5, 4)) >> 4)
--#define PCS1G_LPI_CFG_TX_ASSERT_LPIDLE                    BIT(0)
--
--#define PCS1G_LPI_WAKE_ERROR_CNT                          0x84
--
--#define PCS1G_LPI_STATUS                                  0x88
--
--#define PCS1G_LPI_STATUS_RX_LPI_FAIL                      BIT(16)
--#define PCS1G_LPI_STATUS_RX_LPI_EVENT_STICKY              BIT(12)
--#define PCS1G_LPI_STATUS_RX_QUIET                         BIT(9)
--#define PCS1G_LPI_STATUS_RX_LPI_MODE                      BIT(8)
--#define PCS1G_LPI_STATUS_TX_LPI_EVENT_STICKY              BIT(4)
--#define PCS1G_LPI_STATUS_TX_QUIET                         BIT(1)
--#define PCS1G_LPI_STATUS_TX_LPI_MODE                      BIT(0)
--
--#define PCS1G_TSTPAT_MODE_CFG                             0x8c
--
--#define PCS1G_TSTPAT_STATUS                               0x90
--
--#define PCS1G_TSTPAT_STATUS_JTP_ERR_CNT(x)                (((x) << 8) & GENMASK(15, 8))
--#define PCS1G_TSTPAT_STATUS_JTP_ERR_CNT_M                 GENMASK(15, 8)
--#define PCS1G_TSTPAT_STATUS_JTP_ERR_CNT_X(x)              (((x) & GENMASK(15, 8)) >> 8)
--#define PCS1G_TSTPAT_STATUS_JTP_ERR                       BIT(4)
--#define PCS1G_TSTPAT_STATUS_JTP_LOCK                      BIT(0)
--
--#define DEV_PCS_FX100_CFG                                 0x94
--
--#define DEV_PCS_FX100_CFG_SD_SEL                          BIT(26)
--#define DEV_PCS_FX100_CFG_SD_POL                          BIT(25)
--#define DEV_PCS_FX100_CFG_SD_ENA                          BIT(24)
--#define DEV_PCS_FX100_CFG_LOOPBACK_ENA                    BIT(20)
--#define DEV_PCS_FX100_CFG_SWAP_MII_ENA                    BIT(16)
--#define DEV_PCS_FX100_CFG_RXBITSEL(x)                     (((x) << 12) & GENMASK(15, 12))
--#define DEV_PCS_FX100_CFG_RXBITSEL_M                      GENMASK(15, 12)
--#define DEV_PCS_FX100_CFG_RXBITSEL_X(x)                   (((x) & GENMASK(15, 12)) >> 12)
--#define DEV_PCS_FX100_CFG_SIGDET_CFG(x)                   (((x) << 9) & GENMASK(10, 9))
--#define DEV_PCS_FX100_CFG_SIGDET_CFG_M                    GENMASK(10, 9)
--#define DEV_PCS_FX100_CFG_SIGDET_CFG_X(x)                 (((x) & GENMASK(10, 9)) >> 9)
--#define DEV_PCS_FX100_CFG_LINKHYST_TM_ENA                 BIT(8)
--#define DEV_PCS_FX100_CFG_LINKHYSTTIMER(x)                (((x) << 4) & GENMASK(7, 4))
--#define DEV_PCS_FX100_CFG_LINKHYSTTIMER_M                 GENMASK(7, 4)
--#define DEV_PCS_FX100_CFG_LINKHYSTTIMER_X(x)              (((x) & GENMASK(7, 4)) >> 4)
--#define DEV_PCS_FX100_CFG_UNIDIR_MODE_ENA                 BIT(3)
--#define DEV_PCS_FX100_CFG_FEFCHK_ENA                      BIT(2)
--#define DEV_PCS_FX100_CFG_FEFGEN_ENA                      BIT(1)
--#define DEV_PCS_FX100_CFG_PCS_ENA                         BIT(0)
--
--#define DEV_PCS_FX100_STATUS                              0x98
--
--#define DEV_PCS_FX100_STATUS_EDGE_POS_PTP(x)              (((x) << 8) & GENMASK(11, 8))
--#define DEV_PCS_FX100_STATUS_EDGE_POS_PTP_M               GENMASK(11, 8)
--#define DEV_PCS_FX100_STATUS_EDGE_POS_PTP_X(x)            (((x) & GENMASK(11, 8)) >> 8)
--#define DEV_PCS_FX100_STATUS_PCS_ERROR_STICKY             BIT(7)
--#define DEV_PCS_FX100_STATUS_FEF_FOUND_STICKY             BIT(6)
--#define DEV_PCS_FX100_STATUS_SSD_ERROR_STICKY             BIT(5)
--#define DEV_PCS_FX100_STATUS_SYNC_LOST_STICKY             BIT(4)
--#define DEV_PCS_FX100_STATUS_FEF_STATUS                   BIT(2)
--#define DEV_PCS_FX100_STATUS_SIGNAL_DETECT                BIT(1)
--#define DEV_PCS_FX100_STATUS_SYNC_STATUS                  BIT(0)
--
--#endif
---- a/drivers/net/ethernet/mscc/ocelot_qsys.h
-+++ /dev/null
-@@ -1,270 +0,0 @@
--/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
--/*
-- * Microsemi Ocelot Switch driver
-- *
-- * Copyright (c) 2017 Microsemi Corporation
-- */
--
--#ifndef _MSCC_OCELOT_QSYS_H_
--#define _MSCC_OCELOT_QSYS_H_
--
--#define QSYS_PORT_MODE_RSZ                                0x4
--
--#define QSYS_PORT_MODE_DEQUEUE_DIS                        BIT(1)
--#define QSYS_PORT_MODE_DEQUEUE_LATE                       BIT(0)
--
--#define QSYS_SWITCH_PORT_MODE_RSZ                         0x4
--
--#define QSYS_SWITCH_PORT_MODE_PORT_ENA                    BIT(14)
--#define QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(x)             (((x) << 11) & GENMASK(13, 11))
--#define QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG_M              GENMASK(13, 11)
--#define QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG_X(x)           (((x) & GENMASK(13, 11)) >> 11)
--#define QSYS_SWITCH_PORT_MODE_YEL_RSRVD                   BIT(10)
--#define QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE           BIT(9)
--#define QSYS_SWITCH_PORT_MODE_TX_PFC_ENA(x)               (((x) << 1) & GENMASK(8, 1))
--#define QSYS_SWITCH_PORT_MODE_TX_PFC_ENA_M                GENMASK(8, 1)
--#define QSYS_SWITCH_PORT_MODE_TX_PFC_ENA_X(x)             (((x) & GENMASK(8, 1)) >> 1)
--#define QSYS_SWITCH_PORT_MODE_TX_PFC_MODE                 BIT(0)
--
--#define QSYS_STAT_CNT_CFG_TX_GREEN_CNT_MODE               BIT(5)
--#define QSYS_STAT_CNT_CFG_TX_YELLOW_CNT_MODE              BIT(4)
--#define QSYS_STAT_CNT_CFG_DROP_GREEN_CNT_MODE             BIT(3)
--#define QSYS_STAT_CNT_CFG_DROP_YELLOW_CNT_MODE            BIT(2)
--#define QSYS_STAT_CNT_CFG_DROP_COUNT_ONCE                 BIT(1)
--#define QSYS_STAT_CNT_CFG_DROP_COUNT_EGRESS               BIT(0)
--
--#define QSYS_EEE_CFG_RSZ                                  0x4
--
--#define QSYS_EEE_THRES_EEE_HIGH_BYTES(x)                  (((x) << 8) & GENMASK(15, 8))
--#define QSYS_EEE_THRES_EEE_HIGH_BYTES_M                   GENMASK(15, 8)
--#define QSYS_EEE_THRES_EEE_HIGH_BYTES_X(x)                (((x) & GENMASK(15, 8)) >> 8)
--#define QSYS_EEE_THRES_EEE_HIGH_FRAMES(x)                 ((x) & GENMASK(7, 0))
--#define QSYS_EEE_THRES_EEE_HIGH_FRAMES_M                  GENMASK(7, 0)
--
--#define QSYS_SW_STATUS_RSZ                                0x4
--
--#define QSYS_EXT_CPU_CFG_EXT_CPU_PORT(x)                  (((x) << 8) & GENMASK(12, 8))
--#define QSYS_EXT_CPU_CFG_EXT_CPU_PORT_M                   GENMASK(12, 8)
--#define QSYS_EXT_CPU_CFG_EXT_CPU_PORT_X(x)                (((x) & GENMASK(12, 8)) >> 8)
--#define QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK(x)                  ((x) & GENMASK(7, 0))
--#define QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M                   GENMASK(7, 0)
--
--#define QSYS_QMAP_GSZ                                     0x4
--
--#define QSYS_QMAP_SE_BASE(x)                              (((x) << 5) & GENMASK(12, 5))
--#define QSYS_QMAP_SE_BASE_M                               GENMASK(12, 5)
--#define QSYS_QMAP_SE_BASE_X(x)                            (((x) & GENMASK(12, 5)) >> 5)
--#define QSYS_QMAP_SE_IDX_SEL(x)                           (((x) << 2) & GENMASK(4, 2))
--#define QSYS_QMAP_SE_IDX_SEL_M                            GENMASK(4, 2)
--#define QSYS_QMAP_SE_IDX_SEL_X(x)                         (((x) & GENMASK(4, 2)) >> 2)
--#define QSYS_QMAP_SE_INP_SEL(x)                           ((x) & GENMASK(1, 0))
--#define QSYS_QMAP_SE_INP_SEL_M                            GENMASK(1, 0)
--
--#define QSYS_ISDX_SGRP_GSZ                                0x4
--
--#define QSYS_TIMED_FRAME_ENTRY_GSZ                        0x4
--
--#define QSYS_TFRM_MISC_TIMED_CANCEL_SLOT(x)               (((x) << 9) & GENMASK(18, 9))
--#define QSYS_TFRM_MISC_TIMED_CANCEL_SLOT_M                GENMASK(18, 9)
--#define QSYS_TFRM_MISC_TIMED_CANCEL_SLOT_X(x)             (((x) & GENMASK(18, 9)) >> 9)
--#define QSYS_TFRM_MISC_TIMED_CANCEL_1SHOT                 BIT(8)
--#define QSYS_TFRM_MISC_TIMED_SLOT_MODE_MC                 BIT(7)
--#define QSYS_TFRM_MISC_TIMED_ENTRY_FAST_CNT(x)            ((x) & GENMASK(6, 0))
--#define QSYS_TFRM_MISC_TIMED_ENTRY_FAST_CNT_M             GENMASK(6, 0)
--
--#define QSYS_RED_PROFILE_RSZ                              0x4
--
--#define QSYS_RED_PROFILE_WM_RED_LOW(x)                    (((x) << 8) & GENMASK(15, 8))
--#define QSYS_RED_PROFILE_WM_RED_LOW_M                     GENMASK(15, 8)
--#define QSYS_RED_PROFILE_WM_RED_LOW_X(x)                  (((x) & GENMASK(15, 8)) >> 8)
--#define QSYS_RED_PROFILE_WM_RED_HIGH(x)                   ((x) & GENMASK(7, 0))
--#define QSYS_RED_PROFILE_WM_RED_HIGH_M                    GENMASK(7, 0)
--
--#define QSYS_RES_CFG_GSZ                                  0x8
--
--#define QSYS_RES_STAT_GSZ                                 0x8
--
--#define QSYS_RES_STAT_INUSE(x)                            (((x) << 12) & GENMASK(23, 12))
--#define QSYS_RES_STAT_INUSE_M                             GENMASK(23, 12)
--#define QSYS_RES_STAT_INUSE_X(x)                          (((x) & GENMASK(23, 12)) >> 12)
--#define QSYS_RES_STAT_MAXUSE(x)                           ((x) & GENMASK(11, 0))
--#define QSYS_RES_STAT_MAXUSE_M                            GENMASK(11, 0)
--
--#define QSYS_EVENTS_CORE_EV_FDC(x)                        (((x) << 2) & GENMASK(4, 2))
--#define QSYS_EVENTS_CORE_EV_FDC_M                         GENMASK(4, 2)
--#define QSYS_EVENTS_CORE_EV_FDC_X(x)                      (((x) & GENMASK(4, 2)) >> 2)
--#define QSYS_EVENTS_CORE_EV_FRD(x)                        ((x) & GENMASK(1, 0))
--#define QSYS_EVENTS_CORE_EV_FRD_M                         GENMASK(1, 0)
--
--#define QSYS_QMAXSDU_CFG_0_RSZ                            0x4
--
--#define QSYS_QMAXSDU_CFG_1_RSZ                            0x4
--
--#define QSYS_QMAXSDU_CFG_2_RSZ                            0x4
--
--#define QSYS_QMAXSDU_CFG_3_RSZ                            0x4
--
--#define QSYS_QMAXSDU_CFG_4_RSZ                            0x4
--
--#define QSYS_QMAXSDU_CFG_5_RSZ                            0x4
--
--#define QSYS_QMAXSDU_CFG_6_RSZ                            0x4
--
--#define QSYS_QMAXSDU_CFG_7_RSZ                            0x4
--
--#define QSYS_PREEMPTION_CFG_RSZ                           0x4
--
--#define QSYS_PREEMPTION_CFG_P_QUEUES(x)                   ((x) & GENMASK(7, 0))
--#define QSYS_PREEMPTION_CFG_P_QUEUES_M                    GENMASK(7, 0)
--#define QSYS_PREEMPTION_CFG_MM_ADD_FRAG_SIZE(x)           (((x) << 8) & GENMASK(9, 8))
--#define QSYS_PREEMPTION_CFG_MM_ADD_FRAG_SIZE_M            GENMASK(9, 8)
--#define QSYS_PREEMPTION_CFG_MM_ADD_FRAG_SIZE_X(x)         (((x) & GENMASK(9, 8)) >> 8)
--#define QSYS_PREEMPTION_CFG_STRICT_IPG(x)                 (((x) << 12) & GENMASK(13, 12))
--#define QSYS_PREEMPTION_CFG_STRICT_IPG_M                  GENMASK(13, 12)
--#define QSYS_PREEMPTION_CFG_STRICT_IPG_X(x)               (((x) & GENMASK(13, 12)) >> 12)
--#define QSYS_PREEMPTION_CFG_HOLD_ADVANCE(x)               (((x) << 16) & GENMASK(31, 16))
--#define QSYS_PREEMPTION_CFG_HOLD_ADVANCE_M                GENMASK(31, 16)
--#define QSYS_PREEMPTION_CFG_HOLD_ADVANCE_X(x)             (((x) & GENMASK(31, 16)) >> 16)
--
--#define QSYS_CIR_CFG_GSZ                                  0x80
--
--#define QSYS_CIR_CFG_CIR_RATE(x)                          (((x) << 6) & GENMASK(20, 6))
--#define QSYS_CIR_CFG_CIR_RATE_M                           GENMASK(20, 6)
--#define QSYS_CIR_CFG_CIR_RATE_X(x)                        (((x) & GENMASK(20, 6)) >> 6)
--#define QSYS_CIR_CFG_CIR_BURST(x)                         ((x) & GENMASK(5, 0))
--#define QSYS_CIR_CFG_CIR_BURST_M                          GENMASK(5, 0)
--
--#define QSYS_EIR_CFG_GSZ                                  0x80
--
--#define QSYS_EIR_CFG_EIR_RATE(x)                          (((x) << 7) & GENMASK(21, 7))
--#define QSYS_EIR_CFG_EIR_RATE_M                           GENMASK(21, 7)
--#define QSYS_EIR_CFG_EIR_RATE_X(x)                        (((x) & GENMASK(21, 7)) >> 7)
--#define QSYS_EIR_CFG_EIR_BURST(x)                         (((x) << 1) & GENMASK(6, 1))
--#define QSYS_EIR_CFG_EIR_BURST_M                          GENMASK(6, 1)
--#define QSYS_EIR_CFG_EIR_BURST_X(x)                       (((x) & GENMASK(6, 1)) >> 1)
--#define QSYS_EIR_CFG_EIR_MARK_ENA                         BIT(0)
--
--#define QSYS_SE_CFG_GSZ                                   0x80
--
--#define QSYS_SE_CFG_SE_DWRR_CNT(x)                        (((x) << 6) & GENMASK(9, 6))
--#define QSYS_SE_CFG_SE_DWRR_CNT_M                         GENMASK(9, 6)
--#define QSYS_SE_CFG_SE_DWRR_CNT_X(x)                      (((x) & GENMASK(9, 6)) >> 6)
--#define QSYS_SE_CFG_SE_RR_ENA                             BIT(5)
--#define QSYS_SE_CFG_SE_AVB_ENA                            BIT(4)
--#define QSYS_SE_CFG_SE_FRM_MODE(x)                        (((x) << 2) & GENMASK(3, 2))
--#define QSYS_SE_CFG_SE_FRM_MODE_M                         GENMASK(3, 2)
--#define QSYS_SE_CFG_SE_FRM_MODE_X(x)                      (((x) & GENMASK(3, 2)) >> 2)
--#define QSYS_SE_CFG_SE_EXC_ENA                            BIT(1)
--#define QSYS_SE_CFG_SE_EXC_FWD                            BIT(0)
--
--#define QSYS_SE_DWRR_CFG_GSZ                              0x80
--#define QSYS_SE_DWRR_CFG_RSZ                              0x4
--
--#define QSYS_SE_CONNECT_GSZ                               0x80
--
--#define QSYS_SE_CONNECT_SE_OUTP_IDX(x)                    (((x) << 17) & GENMASK(24, 17))
--#define QSYS_SE_CONNECT_SE_OUTP_IDX_M                     GENMASK(24, 17)
--#define QSYS_SE_CONNECT_SE_OUTP_IDX_X(x)                  (((x) & GENMASK(24, 17)) >> 17)
--#define QSYS_SE_CONNECT_SE_INP_IDX(x)                     (((x) << 9) & GENMASK(16, 9))
--#define QSYS_SE_CONNECT_SE_INP_IDX_M                      GENMASK(16, 9)
--#define QSYS_SE_CONNECT_SE_INP_IDX_X(x)                   (((x) & GENMASK(16, 9)) >> 9)
--#define QSYS_SE_CONNECT_SE_OUTP_CON(x)                    (((x) << 5) & GENMASK(8, 5))
--#define QSYS_SE_CONNECT_SE_OUTP_CON_M                     GENMASK(8, 5)
--#define QSYS_SE_CONNECT_SE_OUTP_CON_X(x)                  (((x) & GENMASK(8, 5)) >> 5)
--#define QSYS_SE_CONNECT_SE_INP_CNT(x)                     (((x) << 1) & GENMASK(4, 1))
--#define QSYS_SE_CONNECT_SE_INP_CNT_M                      GENMASK(4, 1)
--#define QSYS_SE_CONNECT_SE_INP_CNT_X(x)                   (((x) & GENMASK(4, 1)) >> 1)
--#define QSYS_SE_CONNECT_SE_TERMINAL                       BIT(0)
--
--#define QSYS_SE_DLB_SENSE_GSZ                             0x80
--
--#define QSYS_SE_DLB_SENSE_SE_DLB_PRIO(x)                  (((x) << 11) & GENMASK(13, 11))
--#define QSYS_SE_DLB_SENSE_SE_DLB_PRIO_M                   GENMASK(13, 11)
--#define QSYS_SE_DLB_SENSE_SE_DLB_PRIO_X(x)                (((x) & GENMASK(13, 11)) >> 11)
--#define QSYS_SE_DLB_SENSE_SE_DLB_SPORT(x)                 (((x) << 7) & GENMASK(10, 7))
--#define QSYS_SE_DLB_SENSE_SE_DLB_SPORT_M                  GENMASK(10, 7)
--#define QSYS_SE_DLB_SENSE_SE_DLB_SPORT_X(x)               (((x) & GENMASK(10, 7)) >> 7)
--#define QSYS_SE_DLB_SENSE_SE_DLB_DPORT(x)                 (((x) << 3) & GENMASK(6, 3))
--#define QSYS_SE_DLB_SENSE_SE_DLB_DPORT_M                  GENMASK(6, 3)
--#define QSYS_SE_DLB_SENSE_SE_DLB_DPORT_X(x)               (((x) & GENMASK(6, 3)) >> 3)
--#define QSYS_SE_DLB_SENSE_SE_DLB_PRIO_ENA                 BIT(2)
--#define QSYS_SE_DLB_SENSE_SE_DLB_SPORT_ENA                BIT(1)
--#define QSYS_SE_DLB_SENSE_SE_DLB_DPORT_ENA                BIT(0)
--
--#define QSYS_CIR_STATE_GSZ                                0x80
--
--#define QSYS_CIR_STATE_CIR_LVL(x)                         (((x) << 4) & GENMASK(25, 4))
--#define QSYS_CIR_STATE_CIR_LVL_M                          GENMASK(25, 4)
--#define QSYS_CIR_STATE_CIR_LVL_X(x)                       (((x) & GENMASK(25, 4)) >> 4)
--#define QSYS_CIR_STATE_SHP_TIME(x)                        ((x) & GENMASK(3, 0))
--#define QSYS_CIR_STATE_SHP_TIME_M                         GENMASK(3, 0)
--
--#define QSYS_EIR_STATE_GSZ                                0x80
--
--#define QSYS_SE_STATE_GSZ                                 0x80
--
--#define QSYS_SE_STATE_SE_OUTP_LVL(x)                      (((x) << 1) & GENMASK(2, 1))
--#define QSYS_SE_STATE_SE_OUTP_LVL_M                       GENMASK(2, 1)
--#define QSYS_SE_STATE_SE_OUTP_LVL_X(x)                    (((x) & GENMASK(2, 1)) >> 1)
--#define QSYS_SE_STATE_SE_WAS_YEL                          BIT(0)
--
--#define QSYS_HSCH_MISC_CFG_SE_CONNECT_VLD                 BIT(8)
--#define QSYS_HSCH_MISC_CFG_FRM_ADJ(x)                     (((x) << 3) & GENMASK(7, 3))
--#define QSYS_HSCH_MISC_CFG_FRM_ADJ_M                      GENMASK(7, 3)
--#define QSYS_HSCH_MISC_CFG_FRM_ADJ_X(x)                   (((x) & GENMASK(7, 3)) >> 3)
--#define QSYS_HSCH_MISC_CFG_LEAK_DIS                       BIT(2)
--#define QSYS_HSCH_MISC_CFG_QSHP_EXC_ENA                   BIT(1)
--#define QSYS_HSCH_MISC_CFG_PFC_BYP_UPD                    BIT(0)
--
--#define QSYS_TAG_CONFIG_RSZ                               0x4
--
--#define QSYS_TAG_CONFIG_ENABLE                            BIT(0)
--#define QSYS_TAG_CONFIG_LINK_SPEED(x)                     (((x) << 4) & GENMASK(5, 4))
--#define QSYS_TAG_CONFIG_LINK_SPEED_M                      GENMASK(5, 4)
--#define QSYS_TAG_CONFIG_LINK_SPEED_X(x)                   (((x) & GENMASK(5, 4)) >> 4)
--#define QSYS_TAG_CONFIG_INIT_GATE_STATE(x)                (((x) << 8) & GENMASK(15, 8))
--#define QSYS_TAG_CONFIG_INIT_GATE_STATE_M                 GENMASK(15, 8)
--#define QSYS_TAG_CONFIG_INIT_GATE_STATE_X(x)              (((x) & GENMASK(15, 8)) >> 8)
--#define QSYS_TAG_CONFIG_SCH_TRAFFIC_QUEUES(x)             (((x) << 16) & GENMASK(23, 16))
--#define QSYS_TAG_CONFIG_SCH_TRAFFIC_QUEUES_M              GENMASK(23, 16)
--#define QSYS_TAG_CONFIG_SCH_TRAFFIC_QUEUES_X(x)           (((x) & GENMASK(23, 16)) >> 16)
--
--#define QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM(x)               ((x) & GENMASK(7, 0))
--#define QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM_M                GENMASK(7, 0)
--#define QSYS_TAS_PARAM_CFG_CTRL_ALWAYS_GUARD_BAND_SCH_Q   BIT(8)
--#define QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE             BIT(16)
--
--#define QSYS_PORT_MAX_SDU_RSZ                             0x4
--
--#define QSYS_PARAM_CFG_REG_3_BASE_TIME_SEC_MSB(x)         ((x) & GENMASK(15, 0))
--#define QSYS_PARAM_CFG_REG_3_BASE_TIME_SEC_MSB_M          GENMASK(15, 0)
--#define QSYS_PARAM_CFG_REG_3_LIST_LENGTH(x)               (((x) << 16) & GENMASK(31, 16))
--#define QSYS_PARAM_CFG_REG_3_LIST_LENGTH_M                GENMASK(31, 16)
--#define QSYS_PARAM_CFG_REG_3_LIST_LENGTH_X(x)             (((x) & GENMASK(31, 16)) >> 16)
--
--#define QSYS_GCL_CFG_REG_1_GCL_ENTRY_NUM(x)               ((x) & GENMASK(5, 0))
--#define QSYS_GCL_CFG_REG_1_GCL_ENTRY_NUM_M                GENMASK(5, 0)
--#define QSYS_GCL_CFG_REG_1_GATE_STATE(x)                  (((x) << 8) & GENMASK(15, 8))
--#define QSYS_GCL_CFG_REG_1_GATE_STATE_M                   GENMASK(15, 8)
--#define QSYS_GCL_CFG_REG_1_GATE_STATE_X(x)                (((x) & GENMASK(15, 8)) >> 8)
--
--#define QSYS_PARAM_STATUS_REG_3_BASE_TIME_SEC_MSB(x)      ((x) & GENMASK(15, 0))
--#define QSYS_PARAM_STATUS_REG_3_BASE_TIME_SEC_MSB_M       GENMASK(15, 0)
--#define QSYS_PARAM_STATUS_REG_3_LIST_LENGTH(x)            (((x) << 16) & GENMASK(31, 16))
--#define QSYS_PARAM_STATUS_REG_3_LIST_LENGTH_M             GENMASK(31, 16)
--#define QSYS_PARAM_STATUS_REG_3_LIST_LENGTH_X(x)          (((x) & GENMASK(31, 16)) >> 16)
--
--#define QSYS_PARAM_STATUS_REG_8_CFG_CHG_TIME_SEC_MSB(x)   ((x) & GENMASK(15, 0))
--#define QSYS_PARAM_STATUS_REG_8_CFG_CHG_TIME_SEC_MSB_M    GENMASK(15, 0)
--#define QSYS_PARAM_STATUS_REG_8_OPER_GATE_STATE(x)        (((x) << 16) & GENMASK(23, 16))
--#define QSYS_PARAM_STATUS_REG_8_OPER_GATE_STATE_M         GENMASK(23, 16)
--#define QSYS_PARAM_STATUS_REG_8_OPER_GATE_STATE_X(x)      (((x) & GENMASK(23, 16)) >> 16)
--#define QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING            BIT(24)
--
--#define QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM(x)            ((x) & GENMASK(5, 0))
--#define QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM_M             GENMASK(5, 0)
--#define QSYS_GCL_STATUS_REG_1_GATE_STATE(x)               (((x) << 8) & GENMASK(15, 8))
--#define QSYS_GCL_STATUS_REG_1_GATE_STATE_M                GENMASK(15, 8)
--#define QSYS_GCL_STATUS_REG_1_GATE_STATE_X(x)             (((x) & GENMASK(15, 8)) >> 8)
--
--#endif
---- a/drivers/net/ethernet/mscc/ocelot_tsn.c
-+++ b/drivers/net/ethernet/mscc/ocelot_tsn.c
-@@ -11,8 +11,8 @@
- #include <linux/iopoll.h>
- #include "ocelot.h"
- #include <soc/mscc/ocelot_sys.h>
--#include "ocelot_ana.h"
--#include "ocelot_qsys.h"
-+#include <soc/mscc/ocelot_ana.h>
-+#include <soc/mscc/ocelot_qsys.h>
- #include "ocelot_rew.h"
- #include "ocelot_dev_gmii.h"
- #include "ocelot_tsn.h"
---- /dev/null
-+++ b/include/soc/mscc/ocelot_ana.h
-@@ -0,0 +1,642 @@
-+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
-+/*
-+ * Microsemi Ocelot Switch driver
-+ *
-+ * Copyright (c) 2017 Microsemi Corporation
-+ */
-+
-+#ifndef _MSCC_OCELOT_ANA_H_
-+#define _MSCC_OCELOT_ANA_H_
-+
-+#define ANA_ANAGEFIL_B_DOM_EN                             BIT(22)
-+#define ANA_ANAGEFIL_B_DOM_VAL                            BIT(21)
-+#define ANA_ANAGEFIL_AGE_LOCKED                           BIT(20)
-+#define ANA_ANAGEFIL_PID_EN                               BIT(19)
-+#define ANA_ANAGEFIL_PID_VAL(x)                           (((x) << 14) & GENMASK(18, 14))
-+#define ANA_ANAGEFIL_PID_VAL_M                            GENMASK(18, 14)
-+#define ANA_ANAGEFIL_PID_VAL_X(x)                         (((x) & GENMASK(18, 14)) >> 14)
-+#define ANA_ANAGEFIL_VID_EN                               BIT(13)
-+#define ANA_ANAGEFIL_VID_VAL(x)                           ((x) & GENMASK(12, 0))
-+#define ANA_ANAGEFIL_VID_VAL_M                            GENMASK(12, 0)
-+
-+#define ANA_STORMLIMIT_CFG_RSZ                            0x4
-+
-+#define ANA_STORMLIMIT_CFG_STORM_RATE(x)                  (((x) << 3) & GENMASK(6, 3))
-+#define ANA_STORMLIMIT_CFG_STORM_RATE_M                   GENMASK(6, 3)
-+#define ANA_STORMLIMIT_CFG_STORM_RATE_X(x)                (((x) & GENMASK(6, 3)) >> 3)
-+#define ANA_STORMLIMIT_CFG_STORM_UNIT                     BIT(2)
-+#define ANA_STORMLIMIT_CFG_STORM_MODE(x)                  ((x) & GENMASK(1, 0))
-+#define ANA_STORMLIMIT_CFG_STORM_MODE_M                   GENMASK(1, 0)
-+
-+#define ANA_AUTOAGE_AGE_FAST                              BIT(21)
-+#define ANA_AUTOAGE_AGE_PERIOD(x)                         (((x) << 1) & GENMASK(20, 1))
-+#define ANA_AUTOAGE_AGE_PERIOD_M                          GENMASK(20, 1)
-+#define ANA_AUTOAGE_AGE_PERIOD_X(x)                       (((x) & GENMASK(20, 1)) >> 1)
-+#define ANA_AUTOAGE_AUTOAGE_LOCKED                        BIT(0)
-+
-+#define ANA_MACTOPTIONS_REDUCED_TABLE                     BIT(1)
-+#define ANA_MACTOPTIONS_SHADOW                            BIT(0)
-+
-+#define ANA_AGENCTRL_FID_MASK(x)                          (((x) << 12) & GENMASK(23, 12))
-+#define ANA_AGENCTRL_FID_MASK_M                           GENMASK(23, 12)
-+#define ANA_AGENCTRL_FID_MASK_X(x)                        (((x) & GENMASK(23, 12)) >> 12)
-+#define ANA_AGENCTRL_IGNORE_DMAC_FLAGS                    BIT(11)
-+#define ANA_AGENCTRL_IGNORE_SMAC_FLAGS                    BIT(10)
-+#define ANA_AGENCTRL_FLOOD_SPECIAL                        BIT(9)
-+#define ANA_AGENCTRL_FLOOD_IGNORE_VLAN                    BIT(8)
-+#define ANA_AGENCTRL_MIRROR_CPU                           BIT(7)
-+#define ANA_AGENCTRL_LEARN_CPU_COPY                       BIT(6)
-+#define ANA_AGENCTRL_LEARN_FWD_KILL                       BIT(5)
-+#define ANA_AGENCTRL_LEARN_IGNORE_VLAN                    BIT(4)
-+#define ANA_AGENCTRL_CPU_CPU_KILL_ENA                     BIT(3)
-+#define ANA_AGENCTRL_GREEN_COUNT_MODE                     BIT(2)
-+#define ANA_AGENCTRL_YELLOW_COUNT_MODE                    BIT(1)
-+#define ANA_AGENCTRL_RED_COUNT_MODE                       BIT(0)
-+
-+#define ANA_FLOODING_RSZ                                  0x4
-+
-+#define ANA_FLOODING_FLD_UNICAST(x)                       (((x) << 12) & GENMASK(17, 12))
-+#define ANA_FLOODING_FLD_UNICAST_M                        GENMASK(17, 12)
-+#define ANA_FLOODING_FLD_UNICAST_X(x)                     (((x) & GENMASK(17, 12)) >> 12)
-+#define ANA_FLOODING_FLD_BROADCAST(x)                     (((x) << 6) & GENMASK(11, 6))
-+#define ANA_FLOODING_FLD_BROADCAST_M                      GENMASK(11, 6)
-+#define ANA_FLOODING_FLD_BROADCAST_X(x)                   (((x) & GENMASK(11, 6)) >> 6)
-+#define ANA_FLOODING_FLD_MULTICAST(x)                     ((x) & GENMASK(5, 0))
-+#define ANA_FLOODING_FLD_MULTICAST_M                      GENMASK(5, 0)
-+
-+#define ANA_FLOODING_IPMC_FLD_MC4_CTRL(x)                 (((x) << 18) & GENMASK(23, 18))
-+#define ANA_FLOODING_IPMC_FLD_MC4_CTRL_M                  GENMASK(23, 18)
-+#define ANA_FLOODING_IPMC_FLD_MC4_CTRL_X(x)               (((x) & GENMASK(23, 18)) >> 18)
-+#define ANA_FLOODING_IPMC_FLD_MC4_DATA(x)                 (((x) << 12) & GENMASK(17, 12))
-+#define ANA_FLOODING_IPMC_FLD_MC4_DATA_M                  GENMASK(17, 12)
-+#define ANA_FLOODING_IPMC_FLD_MC4_DATA_X(x)               (((x) & GENMASK(17, 12)) >> 12)
-+#define ANA_FLOODING_IPMC_FLD_MC6_CTRL(x)                 (((x) << 6) & GENMASK(11, 6))
-+#define ANA_FLOODING_IPMC_FLD_MC6_CTRL_M                  GENMASK(11, 6)
-+#define ANA_FLOODING_IPMC_FLD_MC6_CTRL_X(x)               (((x) & GENMASK(11, 6)) >> 6)
-+#define ANA_FLOODING_IPMC_FLD_MC6_DATA(x)                 ((x) & GENMASK(5, 0))
-+#define ANA_FLOODING_IPMC_FLD_MC6_DATA_M                  GENMASK(5, 0)
-+
-+#define ANA_SFLOW_CFG_RSZ                                 0x4
-+
-+#define ANA_SFLOW_CFG_SF_RATE(x)                          (((x) << 2) & GENMASK(13, 2))
-+#define ANA_SFLOW_CFG_SF_RATE_M                           GENMASK(13, 2)
-+#define ANA_SFLOW_CFG_SF_RATE_X(x)                        (((x) & GENMASK(13, 2)) >> 2)
-+#define ANA_SFLOW_CFG_SF_SAMPLE_RX                        BIT(1)
-+#define ANA_SFLOW_CFG_SF_SAMPLE_TX                        BIT(0)
-+
-+#define ANA_PORT_MODE_RSZ                                 0x4
-+
-+#define ANA_PORT_MODE_REDTAG_PARSE_CFG                    BIT(3)
-+#define ANA_PORT_MODE_VLAN_PARSE_CFG(x)                   (((x) << 1) & GENMASK(2, 1))
-+#define ANA_PORT_MODE_VLAN_PARSE_CFG_M                    GENMASK(2, 1)
-+#define ANA_PORT_MODE_VLAN_PARSE_CFG_X(x)                 (((x) & GENMASK(2, 1)) >> 1)
-+#define ANA_PORT_MODE_L3_PARSE_CFG                        BIT(0)
-+
-+#define ANA_CUT_THRU_CFG_RSZ                              0x4
-+
-+#define ANA_PGID_PGID_RSZ                                 0x4
-+
-+#define ANA_PGID_PGID_PGID(x)                             ((x) & GENMASK(11, 0))
-+#define ANA_PGID_PGID_PGID_M                              GENMASK(11, 0)
-+#define ANA_PGID_PGID_CPUQ_DST_PGID(x)                    (((x) << 27) & GENMASK(29, 27))
-+#define ANA_PGID_PGID_CPUQ_DST_PGID_M                     GENMASK(29, 27)
-+#define ANA_PGID_PGID_CPUQ_DST_PGID_X(x)                  (((x) & GENMASK(29, 27)) >> 27)
-+
-+#define ANA_TABLES_MACHDATA_VID(x)                        (((x) << 16) & GENMASK(28, 16))
-+#define ANA_TABLES_MACHDATA_VID_M                         GENMASK(28, 16)
-+#define ANA_TABLES_MACHDATA_VID_X(x)                      (((x) & GENMASK(28, 16)) >> 16)
-+#define ANA_TABLES_MACHDATA_MACHDATA(x)                   ((x) & GENMASK(15, 0))
-+#define ANA_TABLES_MACHDATA_MACHDATA_M                    GENMASK(15, 0)
-+
-+#define ANA_TABLES_STREAMDATA_SSID_VALID                  BIT(16)
-+#define ANA_TABLES_STREAMDATA_SSID(x)                     (((x) << 9) & GENMASK(15, 9))
-+#define ANA_TABLES_STREAMDATA_SSID_M                      GENMASK(15, 9)
-+#define ANA_TABLES_STREAMDATA_SSID_X(x)                   (((x) & GENMASK(15, 9)) >> 9)
-+#define ANA_TABLES_STREAMDATA_SFID_VALID                  BIT(8)
-+#define ANA_TABLES_STREAMDATA_SFID(x)                     ((x) & GENMASK(7, 0))
-+#define ANA_TABLES_STREAMDATA_SFID_M                      GENMASK(7, 0)
-+
-+#define ANA_TABLES_MACACCESS_MAC_CPU_COPY                 BIT(15)
-+#define ANA_TABLES_MACACCESS_SRC_KILL                     BIT(14)
-+#define ANA_TABLES_MACACCESS_IGNORE_VLAN                  BIT(13)
-+#define ANA_TABLES_MACACCESS_AGED_FLAG                    BIT(12)
-+#define ANA_TABLES_MACACCESS_VALID                        BIT(11)
-+#define ANA_TABLES_MACACCESS_ENTRYTYPE(x)                 (((x) << 9) & GENMASK(10, 9))
-+#define ANA_TABLES_MACACCESS_ENTRYTYPE_M                  GENMASK(10, 9)
-+#define ANA_TABLES_MACACCESS_ENTRYTYPE_X(x)               (((x) & GENMASK(10, 9)) >> 9)
-+#define ANA_TABLES_MACACCESS_DEST_IDX(x)                  (((x) << 3) & GENMASK(8, 3))
-+#define ANA_TABLES_MACACCESS_DEST_IDX_M                   GENMASK(8, 3)
-+#define ANA_TABLES_MACACCESS_DEST_IDX_X(x)                (((x) & GENMASK(8, 3)) >> 3)
-+#define ANA_TABLES_MACACCESS_MAC_TABLE_CMD(x)             ((x) & GENMASK(2, 0))
-+#define ANA_TABLES_MACACCESS_MAC_TABLE_CMD_M              GENMASK(2, 0)
-+#define MACACCESS_CMD_IDLE                     0
-+#define MACACCESS_CMD_LEARN                    1
-+#define MACACCESS_CMD_FORGET                   2
-+#define MACACCESS_CMD_AGE                      3
-+#define MACACCESS_CMD_GET_NEXT                 4
-+#define MACACCESS_CMD_INIT                     5
-+#define MACACCESS_CMD_READ                     6
-+#define MACACCESS_CMD_WRITE                    7
-+
-+#define ANA_TABLES_VLANACCESS_VLAN_PORT_MASK(x)           (((x) << 2) & GENMASK(13, 2))
-+#define ANA_TABLES_VLANACCESS_VLAN_PORT_MASK_M            GENMASK(13, 2)
-+#define ANA_TABLES_VLANACCESS_VLAN_PORT_MASK_X(x)         (((x) & GENMASK(13, 2)) >> 2)
-+#define ANA_TABLES_VLANACCESS_VLAN_TBL_CMD(x)             ((x) & GENMASK(1, 0))
-+#define ANA_TABLES_VLANACCESS_VLAN_TBL_CMD_M              GENMASK(1, 0)
-+#define ANA_TABLES_VLANACCESS_CMD_IDLE                    0x0
-+#define ANA_TABLES_VLANACCESS_CMD_WRITE                   0x2
-+#define ANA_TABLES_VLANACCESS_CMD_INIT                    0x3
-+
-+#define ANA_TABLES_VLANTIDX_VLAN_SEC_FWD_ENA              BIT(17)
-+#define ANA_TABLES_VLANTIDX_VLAN_FLOOD_DIS                BIT(16)
-+#define ANA_TABLES_VLANTIDX_VLAN_PRIV_VLAN                BIT(15)
-+#define ANA_TABLES_VLANTIDX_VLAN_LEARN_DISABLED           BIT(14)
-+#define ANA_TABLES_VLANTIDX_VLAN_MIRROR                   BIT(13)
-+#define ANA_TABLES_VLANTIDX_VLAN_SRC_CHK                  BIT(12)
-+#define ANA_TABLES_VLANTIDX_V_INDEX(x)                    ((x) & GENMASK(11, 0))
-+#define ANA_TABLES_VLANTIDX_V_INDEX_M                     GENMASK(11, 0)
-+
-+#define ANA_TABLES_ISDXACCESS_ISDX_PORT_MASK(x)           (((x) << 2) & GENMASK(8, 2))
-+#define ANA_TABLES_ISDXACCESS_ISDX_PORT_MASK_M            GENMASK(8, 2)
-+#define ANA_TABLES_ISDXACCESS_ISDX_PORT_MASK_X(x)         (((x) & GENMASK(8, 2)) >> 2)
-+#define ANA_TABLES_ISDXACCESS_ISDX_TBL_CMD(x)             ((x) & GENMASK(1, 0))
-+#define ANA_TABLES_ISDXACCESS_ISDX_TBL_CMD_M              GENMASK(1, 0)
-+
-+#define ANA_TABLES_ISDXTIDX_ISDX_SDLBI(x)                 (((x) << 21) & GENMASK(28, 21))
-+#define ANA_TABLES_ISDXTIDX_ISDX_SDLBI_M                  GENMASK(28, 21)
-+#define ANA_TABLES_ISDXTIDX_ISDX_SDLBI_X(x)               (((x) & GENMASK(28, 21)) >> 21)
-+#define ANA_TABLES_ISDXTIDX_ISDX_MSTI(x)                  (((x) << 15) & GENMASK(20, 15))
-+#define ANA_TABLES_ISDXTIDX_ISDX_MSTI_M                   GENMASK(20, 15)
-+#define ANA_TABLES_ISDXTIDX_ISDX_MSTI_X(x)                (((x) & GENMASK(20, 15)) >> 15)
-+#define ANA_TABLES_ISDXTIDX_ISDX_ES0_KEY_ENA              BIT(14)
-+#define ANA_TABLES_ISDXTIDX_ISDX_FORCE_ENA                BIT(10)
-+#define ANA_TABLES_ISDXTIDX_ISDX_INDEX(x)                 ((x) & GENMASK(7, 0))
-+#define ANA_TABLES_ISDXTIDX_ISDX_INDEX_M                  GENMASK(7, 0)
-+
-+#define ANA_TABLES_ENTRYLIM_RSZ                           0x4
-+
-+#define ANA_TABLES_ENTRYLIM_ENTRYLIM(x)                   (((x) << 14) & GENMASK(17, 14))
-+#define ANA_TABLES_ENTRYLIM_ENTRYLIM_M                    GENMASK(17, 14)
-+#define ANA_TABLES_ENTRYLIM_ENTRYLIM_X(x)                 (((x) & GENMASK(17, 14)) >> 14)
-+#define ANA_TABLES_ENTRYLIM_ENTRYSTAT(x)                  ((x) & GENMASK(13, 0))
-+#define ANA_TABLES_ENTRYLIM_ENTRYSTAT_M                   GENMASK(13, 0)
-+
-+#define ANA_TABLES_STREAMACCESS_GEN_REC_SEQ_NUM(x)        (((x) << 4) & GENMASK(31, 4))
-+#define ANA_TABLES_STREAMACCESS_GEN_REC_SEQ_NUM_M         GENMASK(31, 4)
-+#define ANA_TABLES_STREAMACCESS_GEN_REC_SEQ_NUM_X(x)      (((x) & GENMASK(31, 4)) >> 4)
-+#define ANA_TABLES_STREAMACCESS_SEQ_GEN_REC_ENA           BIT(3)
-+#define ANA_TABLES_STREAMACCESS_GEN_REC_TYPE              BIT(2)
-+#define ANA_TABLES_STREAMACCESS_STREAM_TBL_CMD(x)         ((x) & GENMASK(1, 0))
-+#define ANA_TABLES_STREAMACCESS_STREAM_TBL_CMD_M          GENMASK(1, 0)
-+
-+#define ANA_TABLES_STREAMTIDX_SEQ_GEN_ERR_STATUS(x)       (((x) << 30) & GENMASK(31, 30))
-+#define ANA_TABLES_STREAMTIDX_SEQ_GEN_ERR_STATUS_M        GENMASK(31, 30)
-+#define ANA_TABLES_STREAMTIDX_SEQ_GEN_ERR_STATUS_X(x)     (((x) & GENMASK(31, 30)) >> 30)
-+#define ANA_TABLES_STREAMTIDX_S_INDEX(x)                  (((x) << 16) & GENMASK(22, 16))
-+#define ANA_TABLES_STREAMTIDX_S_INDEX_M                   GENMASK(22, 16)
-+#define ANA_TABLES_STREAMTIDX_S_INDEX_X(x)                (((x) & GENMASK(22, 16)) >> 16)
-+#define ANA_TABLES_STREAMTIDX_FORCE_SF_BEHAVIOUR          BIT(14)
-+#define ANA_TABLES_STREAMTIDX_SEQ_HISTORY_LEN(x)          (((x) << 8) & GENMASK(13, 8))
-+#define ANA_TABLES_STREAMTIDX_SEQ_HISTORY_LEN_M           GENMASK(13, 8)
-+#define ANA_TABLES_STREAMTIDX_SEQ_HISTORY_LEN_X(x)        (((x) & GENMASK(13, 8)) >> 8)
-+#define ANA_TABLES_STREAMTIDX_RESET_ON_ROGUE              BIT(7)
-+#define ANA_TABLES_STREAMTIDX_REDTAG_POP                  BIT(6)
-+#define ANA_TABLES_STREAMTIDX_STREAM_SPLIT                BIT(5)
-+#define ANA_TABLES_STREAMTIDX_SEQ_SPACE_LOG2(x)           ((x) & GENMASK(4, 0))
-+#define ANA_TABLES_STREAMTIDX_SEQ_SPACE_LOG2_M            GENMASK(4, 0)
-+
-+#define ANA_TABLES_SEQ_MASK_SPLIT_MASK(x)                 (((x) << 16) & GENMASK(22, 16))
-+#define ANA_TABLES_SEQ_MASK_SPLIT_MASK_M                  GENMASK(22, 16)
-+#define ANA_TABLES_SEQ_MASK_SPLIT_MASK_X(x)               (((x) & GENMASK(22, 16)) >> 16)
-+#define ANA_TABLES_SEQ_MASK_INPUT_PORT_MASK(x)            ((x) & GENMASK(6, 0))
-+#define ANA_TABLES_SEQ_MASK_INPUT_PORT_MASK_M             GENMASK(6, 0)
-+
-+#define ANA_TABLES_SFID_MASK_IGR_PORT_MASK(x)             (((x) << 1) & GENMASK(7, 1))
-+#define ANA_TABLES_SFID_MASK_IGR_PORT_MASK_M              GENMASK(7, 1)
-+#define ANA_TABLES_SFID_MASK_IGR_PORT_MASK_X(x)           (((x) & GENMASK(7, 1)) >> 1)
-+#define ANA_TABLES_SFID_MASK_IGR_SRCPORT_MATCH_ENA        BIT(0)
-+
-+#define ANA_TABLES_SFIDACCESS_IGR_PRIO_MATCH_ENA          BIT(22)
-+#define ANA_TABLES_SFIDACCESS_IGR_PRIO(x)                 (((x) << 19) & GENMASK(21, 19))
-+#define ANA_TABLES_SFIDACCESS_IGR_PRIO_M                  GENMASK(21, 19)
-+#define ANA_TABLES_SFIDACCESS_IGR_PRIO_X(x)               (((x) & GENMASK(21, 19)) >> 19)
-+#define ANA_TABLES_SFIDACCESS_FORCE_BLOCK                 BIT(18)
-+#define ANA_TABLES_SFIDACCESS_MAX_SDU_LEN(x)              (((x) << 2) & GENMASK(17, 2))
-+#define ANA_TABLES_SFIDACCESS_MAX_SDU_LEN_M               GENMASK(17, 2)
-+#define ANA_TABLES_SFIDACCESS_MAX_SDU_LEN_X(x)            (((x) & GENMASK(17, 2)) >> 2)
-+#define ANA_TABLES_SFIDACCESS_SFID_TBL_CMD(x)             ((x) & GENMASK(1, 0))
-+#define ANA_TABLES_SFIDACCESS_SFID_TBL_CMD_M              GENMASK(1, 0)
-+
-+#define SFIDACCESS_CMD_IDLE                             0
-+#define SFIDACCESS_CMD_READ                             1
-+#define SFIDACCESS_CMD_WRITE                            2
-+#define SFIDACCESS_CMD_INIT				3
-+
-+#define ANA_TABLES_SFIDTIDX_SGID_VALID                    BIT(26)
-+#define ANA_TABLES_SFIDTIDX_SGID(x)                       (((x) << 18) & GENMASK(25, 18))
-+#define ANA_TABLES_SFIDTIDX_SGID_M                        GENMASK(25, 18)
-+#define ANA_TABLES_SFIDTIDX_SGID_X(x)                     (((x) & GENMASK(25, 18)) >> 18)
-+#define ANA_TABLES_SFIDTIDX_POL_ENA                       BIT(17)
-+#define ANA_TABLES_SFIDTIDX_POL_IDX(x)                    (((x) << 8) & GENMASK(16, 8))
-+#define ANA_TABLES_SFIDTIDX_POL_IDX_M                     GENMASK(16, 8)
-+#define ANA_TABLES_SFIDTIDX_POL_IDX_X(x)                  (((x) & GENMASK(16, 8)) >> 8)
-+#define ANA_TABLES_SFIDTIDX_SFID_INDEX(x)                 ((x) & GENMASK(7, 0))
-+#define ANA_TABLES_SFIDTIDX_SFID_INDEX_M                  GENMASK(7, 0)
-+
-+#define ANA_MSTI_STATE_RSZ                                0x4
-+
-+#define ANA_OAM_UPM_LM_CNT_RSZ                            0x4
-+
-+#define ANA_SG_ACCESS_CTRL_SGID(x)                        ((x) & GENMASK(7, 0))
-+#define ANA_SG_ACCESS_CTRL_SGID_M                         GENMASK(7, 0)
-+#define ANA_SG_ACCESS_CTRL_CONFIG_CHANGE                  BIT(28)
-+
-+#define ANA_SG_CONFIG_REG_3_BASE_TIME_SEC_MSB(x)          ((x) & GENMASK(15, 0))
-+#define ANA_SG_CONFIG_REG_3_BASE_TIME_SEC_MSB_M           GENMASK(15, 0)
-+#define ANA_SG_CONFIG_REG_3_LIST_LENGTH(x)                (((x) << 16) & GENMASK(18, 16))
-+#define ANA_SG_CONFIG_REG_3_LIST_LENGTH_M                 GENMASK(18, 16)
-+#define ANA_SG_CONFIG_REG_3_LIST_LENGTH_X(x)              (((x) & GENMASK(18, 16)) >> 16)
-+#define ANA_SG_CONFIG_REG_3_GATE_ENABLE                   BIT(20)
-+#define ANA_SG_CONFIG_REG_3_INIT_IPS(x)                   (((x) << 21) & GENMASK(24, 21))
-+#define ANA_SG_CONFIG_REG_3_INIT_IPS_M                    GENMASK(24, 21)
-+#define ANA_SG_CONFIG_REG_3_INIT_IPS_X(x)                 (((x) & GENMASK(24, 21)) >> 21)
-+#define ANA_SG_CONFIG_REG_3_IPV_VALID                     BIT(24)
-+#define ANA_SG_CONFIG_REG_3_IPV_INVALID(x)		  (((x) << 24) & GENMASK(24, 24))
-+#define ANA_SG_CONFIG_REG_3_INIT_IPV(x)                   (((x) << 21) & GENMASK(23, 21))
-+#define ANA_SG_CONFIG_REG_3_INIT_IPV_M                    GENMASK(23, 21)
-+#define ANA_SG_CONFIG_REG_3_INIT_IPV_X(x)                 (((x) & GENMASK(23, 21)) >> 21)
-+#define ANA_SG_CONFIG_REG_3_INIT_GATE_STATE               BIT(25)
-+
-+#define ANA_SG_GCL_GS_CONFIG_RSZ                          0x4
-+
-+#define ANA_SG_GCL_GS_CONFIG_IPS(x)                       ((x) & GENMASK(3, 0))
-+#define ANA_SG_GCL_GS_CONFIG_IPS_M                        GENMASK(3, 0)
-+#define ANA_SG_GCL_GS_CONFIG_IPV_VALID                    BIT(3)
-+#define ANA_SG_GCL_GS_CONFIG_IPV(x)                       ((x) & GENMASK(2, 0))
-+#define ANA_SG_GCL_GS_CONFIG_IPV_M                        GENMASK(2, 0)
-+#define ANA_SG_GCL_GS_CONFIG_GATE_STATE                   BIT(4)
-+
-+#define ANA_SG_GCL_TI_CONFIG_RSZ                          0x4
-+
-+#define ANA_SG_STATUS_REG_3_CFG_CHG_TIME_SEC_MSB(x)       ((x) & GENMASK(15, 0))
-+#define ANA_SG_STATUS_REG_3_CFG_CHG_TIME_SEC_MSB_M        GENMASK(15, 0)
-+#define ANA_SG_STATUS_REG_3_GATE_STATE                    BIT(16)
-+#define ANA_SG_STATUS_REG_3_IPS(x)                        (((x) << 20) & GENMASK(23, 20))
-+#define ANA_SG_STATUS_REG_3_IPS_M                         GENMASK(23, 20)
-+#define ANA_SG_STATUS_REG_3_IPS_X(x)                      (((x) & GENMASK(23, 20)) >> 20)
-+#define ANA_SG_STATUS_REG_3_IPV_VALID                     BIT(23)
-+#define ANA_SG_STATUS_REG_3_IPV(x)                        (((x) << 20) & GENMASK(22, 20))
-+#define ANA_SG_STATUS_REG_3_IPV_M                         GENMASK(22, 20)
-+#define ANA_SG_STATUS_REG_3_IPV_X(x)                      (((x) & GENMASK(22, 20)) >> 20)
-+#define ANA_SG_STATUS_REG_3_CONFIG_PENDING                BIT(24)
-+
-+#define ANA_PORT_VLAN_CFG_GSZ                             0x100
-+
-+#define ANA_PORT_VLAN_CFG_VLAN_VID_AS_ISDX                BIT(21)
-+#define ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA                  BIT(20)
-+#define ANA_PORT_VLAN_CFG_VLAN_POP_CNT(x)                 (((x) << 18) & GENMASK(19, 18))
-+#define ANA_PORT_VLAN_CFG_VLAN_POP_CNT_M                  GENMASK(19, 18)
-+#define ANA_PORT_VLAN_CFG_VLAN_POP_CNT_X(x)               (((x) & GENMASK(19, 18)) >> 18)
-+#define ANA_PORT_VLAN_CFG_VLAN_INNER_TAG_ENA              BIT(17)
-+#define ANA_PORT_VLAN_CFG_VLAN_TAG_TYPE                   BIT(16)
-+#define ANA_PORT_VLAN_CFG_VLAN_DEI                        BIT(15)
-+#define ANA_PORT_VLAN_CFG_VLAN_PCP(x)                     (((x) << 12) & GENMASK(14, 12))
-+#define ANA_PORT_VLAN_CFG_VLAN_PCP_M                      GENMASK(14, 12)
-+#define ANA_PORT_VLAN_CFG_VLAN_PCP_X(x)                   (((x) & GENMASK(14, 12)) >> 12)
-+#define ANA_PORT_VLAN_CFG_VLAN_VID(x)                     ((x) & GENMASK(11, 0))
-+#define ANA_PORT_VLAN_CFG_VLAN_VID_M                      GENMASK(11, 0)
-+
-+#define ANA_PORT_DROP_CFG_GSZ                             0x100
-+
-+#define ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA               BIT(6)
-+#define ANA_PORT_DROP_CFG_DROP_S_TAGGED_ENA               BIT(5)
-+#define ANA_PORT_DROP_CFG_DROP_C_TAGGED_ENA               BIT(4)
-+#define ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA          BIT(3)
-+#define ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA          BIT(2)
-+#define ANA_PORT_DROP_CFG_DROP_NULL_MAC_ENA               BIT(1)
-+#define ANA_PORT_DROP_CFG_DROP_MC_SMAC_ENA                BIT(0)
-+
-+#define ANA_PORT_QOS_CFG_GSZ                              0x100
-+
-+#define ANA_PORT_QOS_CFG_DP_DEFAULT_VAL                   BIT(8)
-+#define ANA_PORT_QOS_CFG_QOS_DEFAULT_VAL(x)               (((x) << 5) & GENMASK(7, 5))
-+#define ANA_PORT_QOS_CFG_QOS_DEFAULT_VAL_M                GENMASK(7, 5)
-+#define ANA_PORT_QOS_CFG_QOS_DEFAULT_VAL_X(x)             (((x) & GENMASK(7, 5)) >> 5)
-+#define ANA_PORT_QOS_CFG_QOS_DSCP_ENA                     BIT(4)
-+#define ANA_PORT_QOS_CFG_QOS_PCP_ENA                      BIT(3)
-+#define ANA_PORT_QOS_CFG_DSCP_TRANSLATE_ENA               BIT(2)
-+#define ANA_PORT_QOS_CFG_DSCP_REWR_CFG(x)                 ((x) & GENMASK(1, 0))
-+#define ANA_PORT_QOS_CFG_DSCP_REWR_CFG_M                  GENMASK(1, 0)
-+
-+#define ANA_PORT_VCAP_CFG_GSZ                             0x100
-+
-+#define ANA_PORT_VCAP_CFG_S1_ENA                          BIT(14)
-+#define ANA_PORT_VCAP_CFG_S1_DMAC_DIP_ENA(x)              (((x) << 11) & GENMASK(13, 11))
-+#define ANA_PORT_VCAP_CFG_S1_DMAC_DIP_ENA_M               GENMASK(13, 11)
-+#define ANA_PORT_VCAP_CFG_S1_DMAC_DIP_ENA_X(x)            (((x) & GENMASK(13, 11)) >> 11)
-+#define ANA_PORT_VCAP_CFG_S1_VLAN_INNER_TAG_ENA(x)        (((x) << 8) & GENMASK(10, 8))
-+#define ANA_PORT_VCAP_CFG_S1_VLAN_INNER_TAG_ENA_M         GENMASK(10, 8)
-+#define ANA_PORT_VCAP_CFG_S1_VLAN_INNER_TAG_ENA_X(x)      (((x) & GENMASK(10, 8)) >> 8)
-+#define ANA_PORT_VCAP_CFG_PAG_VAL(x)                      ((x) & GENMASK(7, 0))
-+#define ANA_PORT_VCAP_CFG_PAG_VAL_M                       GENMASK(7, 0)
-+
-+#define ANA_PORT_VCAP_S1_KEY_CFG_GSZ                      0x100
-+#define ANA_PORT_VCAP_S1_KEY_CFG_RSZ                      0x4
-+
-+#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_IP6_CFG(x)        (((x) << 4) & GENMASK(6, 4))
-+#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_IP6_CFG_M         GENMASK(6, 4)
-+#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_IP6_CFG_X(x)      (((x) & GENMASK(6, 4)) >> 4)
-+#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_IP4_CFG(x)        (((x) << 2) & GENMASK(3, 2))
-+#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_IP4_CFG_M         GENMASK(3, 2)
-+#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_IP4_CFG_X(x)      (((x) & GENMASK(3, 2)) >> 2)
-+#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_OTHER_CFG(x)      ((x) & GENMASK(1, 0))
-+#define ANA_PORT_VCAP_S1_KEY_CFG_S1_KEY_OTHER_CFG_M       GENMASK(1, 0)
-+
-+#define ANA_PORT_VCAP_S2_CFG_GSZ                          0x100
-+
-+#define ANA_PORT_VCAP_S2_CFG_S2_UDP_PAYLOAD_ENA(x)        (((x) << 17) & GENMASK(18, 17))
-+#define ANA_PORT_VCAP_S2_CFG_S2_UDP_PAYLOAD_ENA_M         GENMASK(18, 17)
-+#define ANA_PORT_VCAP_S2_CFG_S2_UDP_PAYLOAD_ENA_X(x)      (((x) & GENMASK(18, 17)) >> 17)
-+#define ANA_PORT_VCAP_S2_CFG_S2_ETYPE_PAYLOAD_ENA(x)      (((x) << 15) & GENMASK(16, 15))
-+#define ANA_PORT_VCAP_S2_CFG_S2_ETYPE_PAYLOAD_ENA_M       GENMASK(16, 15)
-+#define ANA_PORT_VCAP_S2_CFG_S2_ETYPE_PAYLOAD_ENA_X(x)    (((x) & GENMASK(16, 15)) >> 15)
-+#define ANA_PORT_VCAP_S2_CFG_S2_ENA                       BIT(14)
-+#define ANA_PORT_VCAP_S2_CFG_S2_SNAP_DIS(x)               (((x) << 12) & GENMASK(13, 12))
-+#define ANA_PORT_VCAP_S2_CFG_S2_SNAP_DIS_M                GENMASK(13, 12)
-+#define ANA_PORT_VCAP_S2_CFG_S2_SNAP_DIS_X(x)             (((x) & GENMASK(13, 12)) >> 12)
-+#define ANA_PORT_VCAP_S2_CFG_S2_ARP_DIS(x)                (((x) << 10) & GENMASK(11, 10))
-+#define ANA_PORT_VCAP_S2_CFG_S2_ARP_DIS_M                 GENMASK(11, 10)
-+#define ANA_PORT_VCAP_S2_CFG_S2_ARP_DIS_X(x)              (((x) & GENMASK(11, 10)) >> 10)
-+#define ANA_PORT_VCAP_S2_CFG_S2_IP_TCPUDP_DIS(x)          (((x) << 8) & GENMASK(9, 8))
-+#define ANA_PORT_VCAP_S2_CFG_S2_IP_TCPUDP_DIS_M           GENMASK(9, 8)
-+#define ANA_PORT_VCAP_S2_CFG_S2_IP_TCPUDP_DIS_X(x)        (((x) & GENMASK(9, 8)) >> 8)
-+#define ANA_PORT_VCAP_S2_CFG_S2_IP_OTHER_DIS(x)           (((x) << 6) & GENMASK(7, 6))
-+#define ANA_PORT_VCAP_S2_CFG_S2_IP_OTHER_DIS_M            GENMASK(7, 6)
-+#define ANA_PORT_VCAP_S2_CFG_S2_IP_OTHER_DIS_X(x)         (((x) & GENMASK(7, 6)) >> 6)
-+#define ANA_PORT_VCAP_S2_CFG_S2_IP6_CFG(x)                (((x) << 2) & GENMASK(5, 2))
-+#define ANA_PORT_VCAP_S2_CFG_S2_IP6_CFG_M                 GENMASK(5, 2)
-+#define ANA_PORT_VCAP_S2_CFG_S2_IP6_CFG_X(x)              (((x) & GENMASK(5, 2)) >> 2)
-+#define ANA_PORT_VCAP_S2_CFG_S2_OAM_DIS(x)                ((x) & GENMASK(1, 0))
-+#define ANA_PORT_VCAP_S2_CFG_S2_OAM_DIS_M                 GENMASK(1, 0)
-+
-+#define ANA_PORT_PCP_DEI_MAP_GSZ                          0x100
-+#define ANA_PORT_PCP_DEI_MAP_RSZ                          0x4
-+
-+#define ANA_PORT_PCP_DEI_MAP_DP_PCP_DEI_VAL               BIT(3)
-+#define ANA_PORT_PCP_DEI_MAP_QOS_PCP_DEI_VAL(x)           ((x) & GENMASK(2, 0))
-+#define ANA_PORT_PCP_DEI_MAP_QOS_PCP_DEI_VAL_M            GENMASK(2, 0)
-+
-+#define ANA_PORT_CPU_FWD_CFG_GSZ                          0x100
-+
-+#define ANA_PORT_CPU_FWD_CFG_CPU_VRAP_REDIR_ENA           BIT(7)
-+#define ANA_PORT_CPU_FWD_CFG_CPU_MLD_REDIR_ENA            BIT(6)
-+#define ANA_PORT_CPU_FWD_CFG_CPU_IGMP_REDIR_ENA           BIT(5)
-+#define ANA_PORT_CPU_FWD_CFG_CPU_IPMC_CTRL_COPY_ENA       BIT(4)
-+#define ANA_PORT_CPU_FWD_CFG_CPU_SRC_COPY_ENA             BIT(3)
-+#define ANA_PORT_CPU_FWD_CFG_CPU_ALLBRIDGE_DROP_ENA       BIT(2)
-+#define ANA_PORT_CPU_FWD_CFG_CPU_ALLBRIDGE_REDIR_ENA      BIT(1)
-+#define ANA_PORT_CPU_FWD_CFG_CPU_OAM_ENA                  BIT(0)
-+
-+#define ANA_PORT_CPU_FWD_BPDU_CFG_GSZ                     0x100
-+
-+#define ANA_PORT_CPU_FWD_BPDU_CFG_BPDU_DROP_ENA(x)        (((x) << 16) & GENMASK(31, 16))
-+#define ANA_PORT_CPU_FWD_BPDU_CFG_BPDU_DROP_ENA_M         GENMASK(31, 16)
-+#define ANA_PORT_CPU_FWD_BPDU_CFG_BPDU_DROP_ENA_X(x)      (((x) & GENMASK(31, 16)) >> 16)
-+#define ANA_PORT_CPU_FWD_BPDU_CFG_BPDU_REDIR_ENA(x)       ((x) & GENMASK(15, 0))
-+#define ANA_PORT_CPU_FWD_BPDU_CFG_BPDU_REDIR_ENA_M        GENMASK(15, 0)
-+
-+#define ANA_PORT_CPU_FWD_GARP_CFG_GSZ                     0x100
-+
-+#define ANA_PORT_CPU_FWD_GARP_CFG_GARP_DROP_ENA(x)        (((x) << 16) & GENMASK(31, 16))
-+#define ANA_PORT_CPU_FWD_GARP_CFG_GARP_DROP_ENA_M         GENMASK(31, 16)
-+#define ANA_PORT_CPU_FWD_GARP_CFG_GARP_DROP_ENA_X(x)      (((x) & GENMASK(31, 16)) >> 16)
-+#define ANA_PORT_CPU_FWD_GARP_CFG_GARP_REDIR_ENA(x)       ((x) & GENMASK(15, 0))
-+#define ANA_PORT_CPU_FWD_GARP_CFG_GARP_REDIR_ENA_M        GENMASK(15, 0)
-+
-+#define ANA_PORT_CPU_FWD_CCM_CFG_GSZ                      0x100
-+
-+#define ANA_PORT_CPU_FWD_CCM_CFG_CCM_DROP_ENA(x)          (((x) << 16) & GENMASK(31, 16))
-+#define ANA_PORT_CPU_FWD_CCM_CFG_CCM_DROP_ENA_M           GENMASK(31, 16)
-+#define ANA_PORT_CPU_FWD_CCM_CFG_CCM_DROP_ENA_X(x)        (((x) & GENMASK(31, 16)) >> 16)
-+#define ANA_PORT_CPU_FWD_CCM_CFG_CCM_REDIR_ENA(x)         ((x) & GENMASK(15, 0))
-+#define ANA_PORT_CPU_FWD_CCM_CFG_CCM_REDIR_ENA_M          GENMASK(15, 0)
-+
-+#define ANA_PORT_PORT_CFG_GSZ                             0x100
-+
-+#define ANA_PORT_PORT_CFG_SRC_MIRROR_ENA                  BIT(15)
-+#define ANA_PORT_PORT_CFG_LIMIT_DROP                      BIT(14)
-+#define ANA_PORT_PORT_CFG_LIMIT_CPU                       BIT(13)
-+#define ANA_PORT_PORT_CFG_LOCKED_PORTMOVE_DROP            BIT(12)
-+#define ANA_PORT_PORT_CFG_LOCKED_PORTMOVE_CPU             BIT(11)
-+#define ANA_PORT_PORT_CFG_LEARNDROP                       BIT(10)
-+#define ANA_PORT_PORT_CFG_LEARNCPU                        BIT(9)
-+#define ANA_PORT_PORT_CFG_LEARNAUTO                       BIT(8)
-+#define ANA_PORT_PORT_CFG_LEARN_ENA                       BIT(7)
-+#define ANA_PORT_PORT_CFG_RECV_ENA                        BIT(6)
-+#define ANA_PORT_PORT_CFG_PORTID_VAL(x)                   (((x) << 2) & GENMASK(5, 2))
-+#define ANA_PORT_PORT_CFG_PORTID_VAL_M                    GENMASK(5, 2)
-+#define ANA_PORT_PORT_CFG_PORTID_VAL_X(x)                 (((x) & GENMASK(5, 2)) >> 2)
-+#define ANA_PORT_PORT_CFG_USE_B_DOM_TBL                   BIT(1)
-+#define ANA_PORT_PORT_CFG_LSR_MODE                        BIT(0)
-+
-+#define ANA_PORT_POL_CFG_GSZ                              0x100
-+
-+#define ANA_PORT_POL_CFG_POL_CPU_REDIR_8021               BIT(19)
-+#define ANA_PORT_POL_CFG_POL_CPU_REDIR_IP                 BIT(18)
-+#define ANA_PORT_POL_CFG_PORT_POL_ENA                     BIT(17)
-+#define ANA_PORT_POL_CFG_QUEUE_POL_ENA(x)                 (((x) << 9) & GENMASK(16, 9))
-+#define ANA_PORT_POL_CFG_QUEUE_POL_ENA_M                  GENMASK(16, 9)
-+#define ANA_PORT_POL_CFG_QUEUE_POL_ENA_X(x)               (((x) & GENMASK(16, 9)) >> 9)
-+#define ANA_PORT_POL_CFG_POL_ORDER(x)                     ((x) & GENMASK(8, 0))
-+#define ANA_PORT_POL_CFG_POL_ORDER_M                      GENMASK(8, 0)
-+
-+#define ANA_PORT_PTP_CFG_GSZ                              0x100
-+
-+#define ANA_PORT_PTP_CFG_PTP_BACKPLANE_MODE               BIT(0)
-+
-+#define ANA_PORT_PTP_DLY1_CFG_GSZ                         0x100
-+
-+#define ANA_PORT_PTP_DLY2_CFG_GSZ                         0x100
-+
-+#define ANA_PORT_SFID_CFG_GSZ                             0x100
-+#define ANA_PORT_SFID_CFG_RSZ                             0x4
-+
-+#define ANA_PORT_SFID_CFG_SFID_VALID                      BIT(8)
-+#define ANA_PORT_SFID_CFG_SFID(x)                         ((x) & GENMASK(7, 0))
-+#define ANA_PORT_SFID_CFG_SFID_M                          GENMASK(7, 0)
-+
-+#define ANA_PFC_PFC_CFG_GSZ                               0x40
-+
-+#define ANA_PFC_PFC_CFG_RX_PFC_ENA(x)                     (((x) << 2) & GENMASK(9, 2))
-+#define ANA_PFC_PFC_CFG_RX_PFC_ENA_M                      GENMASK(9, 2)
-+#define ANA_PFC_PFC_CFG_RX_PFC_ENA_X(x)                   (((x) & GENMASK(9, 2)) >> 2)
-+#define ANA_PFC_PFC_CFG_FC_LINK_SPEED(x)                  ((x) & GENMASK(1, 0))
-+#define ANA_PFC_PFC_CFG_FC_LINK_SPEED_M                   GENMASK(1, 0)
-+
-+#define ANA_PFC_PFC_TIMER_GSZ                             0x40
-+#define ANA_PFC_PFC_TIMER_RSZ                             0x4
-+
-+#define ANA_IPT_OAM_MEP_CFG_GSZ                           0x8
-+
-+#define ANA_IPT_OAM_MEP_CFG_MEP_IDX_P(x)                  (((x) << 6) & GENMASK(10, 6))
-+#define ANA_IPT_OAM_MEP_CFG_MEP_IDX_P_M                   GENMASK(10, 6)
-+#define ANA_IPT_OAM_MEP_CFG_MEP_IDX_P_X(x)                (((x) & GENMASK(10, 6)) >> 6)
-+#define ANA_IPT_OAM_MEP_CFG_MEP_IDX(x)                    (((x) << 1) & GENMASK(5, 1))
-+#define ANA_IPT_OAM_MEP_CFG_MEP_IDX_M                     GENMASK(5, 1)
-+#define ANA_IPT_OAM_MEP_CFG_MEP_IDX_X(x)                  (((x) & GENMASK(5, 1)) >> 1)
-+#define ANA_IPT_OAM_MEP_CFG_MEP_IDX_ENA                   BIT(0)
-+
-+#define ANA_IPT_IPT_GSZ                                   0x8
-+
-+#define ANA_IPT_IPT_IPT_CFG(x)                            (((x) << 15) & GENMASK(16, 15))
-+#define ANA_IPT_IPT_IPT_CFG_M                             GENMASK(16, 15)
-+#define ANA_IPT_IPT_IPT_CFG_X(x)                          (((x) & GENMASK(16, 15)) >> 15)
-+#define ANA_IPT_IPT_ISDX_P(x)                             (((x) << 7) & GENMASK(14, 7))
-+#define ANA_IPT_IPT_ISDX_P_M                              GENMASK(14, 7)
-+#define ANA_IPT_IPT_ISDX_P_X(x)                           (((x) & GENMASK(14, 7)) >> 7)
-+#define ANA_IPT_IPT_PPT_IDX(x)                            ((x) & GENMASK(6, 0))
-+#define ANA_IPT_IPT_PPT_IDX_M                             GENMASK(6, 0)
-+
-+#define ANA_PPT_PPT_RSZ                                   0x4
-+
-+#define ANA_FID_MAP_FID_MAP_RSZ                           0x4
-+
-+#define ANA_FID_MAP_FID_MAP_FID_C_VAL(x)                  (((x) << 6) & GENMASK(11, 6))
-+#define ANA_FID_MAP_FID_MAP_FID_C_VAL_M                   GENMASK(11, 6)
-+#define ANA_FID_MAP_FID_MAP_FID_C_VAL_X(x)                (((x) & GENMASK(11, 6)) >> 6)
-+#define ANA_FID_MAP_FID_MAP_FID_B_VAL(x)                  ((x) & GENMASK(5, 0))
-+#define ANA_FID_MAP_FID_MAP_FID_B_VAL_M                   GENMASK(5, 0)
-+
-+#define ANA_AGGR_CFG_AC_RND_ENA                           BIT(7)
-+#define ANA_AGGR_CFG_AC_DMAC_ENA                          BIT(6)
-+#define ANA_AGGR_CFG_AC_SMAC_ENA                          BIT(5)
-+#define ANA_AGGR_CFG_AC_IP6_FLOW_LBL_ENA                  BIT(4)
-+#define ANA_AGGR_CFG_AC_IP6_TCPUDP_ENA                    BIT(3)
-+#define ANA_AGGR_CFG_AC_IP4_SIPDIP_ENA                    BIT(2)
-+#define ANA_AGGR_CFG_AC_IP4_TCPUDP_ENA                    BIT(1)
-+#define ANA_AGGR_CFG_AC_ISDX_ENA                          BIT(0)
-+
-+#define ANA_CPUQ_CFG_CPUQ_MLD(x)                          (((x) << 27) & GENMASK(29, 27))
-+#define ANA_CPUQ_CFG_CPUQ_MLD_M                           GENMASK(29, 27)
-+#define ANA_CPUQ_CFG_CPUQ_MLD_X(x)                        (((x) & GENMASK(29, 27)) >> 27)
-+#define ANA_CPUQ_CFG_CPUQ_IGMP(x)                         (((x) << 24) & GENMASK(26, 24))
-+#define ANA_CPUQ_CFG_CPUQ_IGMP_M                          GENMASK(26, 24)
-+#define ANA_CPUQ_CFG_CPUQ_IGMP_X(x)                       (((x) & GENMASK(26, 24)) >> 24)
-+#define ANA_CPUQ_CFG_CPUQ_IPMC_CTRL(x)                    (((x) << 21) & GENMASK(23, 21))
-+#define ANA_CPUQ_CFG_CPUQ_IPMC_CTRL_M                     GENMASK(23, 21)
-+#define ANA_CPUQ_CFG_CPUQ_IPMC_CTRL_X(x)                  (((x) & GENMASK(23, 21)) >> 21)
-+#define ANA_CPUQ_CFG_CPUQ_ALLBRIDGE(x)                    (((x) << 18) & GENMASK(20, 18))
-+#define ANA_CPUQ_CFG_CPUQ_ALLBRIDGE_M                     GENMASK(20, 18)
-+#define ANA_CPUQ_CFG_CPUQ_ALLBRIDGE_X(x)                  (((x) & GENMASK(20, 18)) >> 18)
-+#define ANA_CPUQ_CFG_CPUQ_LOCKED_PORTMOVE(x)              (((x) << 15) & GENMASK(17, 15))
-+#define ANA_CPUQ_CFG_CPUQ_LOCKED_PORTMOVE_M               GENMASK(17, 15)
-+#define ANA_CPUQ_CFG_CPUQ_LOCKED_PORTMOVE_X(x)            (((x) & GENMASK(17, 15)) >> 15)
-+#define ANA_CPUQ_CFG_CPUQ_SRC_COPY(x)                     (((x) << 12) & GENMASK(14, 12))
-+#define ANA_CPUQ_CFG_CPUQ_SRC_COPY_M                      GENMASK(14, 12)
-+#define ANA_CPUQ_CFG_CPUQ_SRC_COPY_X(x)                   (((x) & GENMASK(14, 12)) >> 12)
-+#define ANA_CPUQ_CFG_CPUQ_MAC_COPY(x)                     (((x) << 9) & GENMASK(11, 9))
-+#define ANA_CPUQ_CFG_CPUQ_MAC_COPY_M                      GENMASK(11, 9)
-+#define ANA_CPUQ_CFG_CPUQ_MAC_COPY_X(x)                   (((x) & GENMASK(11, 9)) >> 9)
-+#define ANA_CPUQ_CFG_CPUQ_LRN(x)                          (((x) << 6) & GENMASK(8, 6))
-+#define ANA_CPUQ_CFG_CPUQ_LRN_M                           GENMASK(8, 6)
-+#define ANA_CPUQ_CFG_CPUQ_LRN_X(x)                        (((x) & GENMASK(8, 6)) >> 6)
-+#define ANA_CPUQ_CFG_CPUQ_MIRROR(x)                       (((x) << 3) & GENMASK(5, 3))
-+#define ANA_CPUQ_CFG_CPUQ_MIRROR_M                        GENMASK(5, 3)
-+#define ANA_CPUQ_CFG_CPUQ_MIRROR_X(x)                     (((x) & GENMASK(5, 3)) >> 3)
-+#define ANA_CPUQ_CFG_CPUQ_SFLOW(x)                        ((x) & GENMASK(2, 0))
-+#define ANA_CPUQ_CFG_CPUQ_SFLOW_M                         GENMASK(2, 0)
-+
-+#define ANA_CPUQ_8021_CFG_RSZ                             0x4
-+
-+#define ANA_CPUQ_8021_CFG_CPUQ_BPDU_VAL(x)                (((x) << 6) & GENMASK(8, 6))
-+#define ANA_CPUQ_8021_CFG_CPUQ_BPDU_VAL_M                 GENMASK(8, 6)
-+#define ANA_CPUQ_8021_CFG_CPUQ_BPDU_VAL_X(x)              (((x) & GENMASK(8, 6)) >> 6)
-+#define ANA_CPUQ_8021_CFG_CPUQ_GARP_VAL(x)                (((x) << 3) & GENMASK(5, 3))
-+#define ANA_CPUQ_8021_CFG_CPUQ_GARP_VAL_M                 GENMASK(5, 3)
-+#define ANA_CPUQ_8021_CFG_CPUQ_GARP_VAL_X(x)              (((x) & GENMASK(5, 3)) >> 3)
-+#define ANA_CPUQ_8021_CFG_CPUQ_CCM_VAL(x)                 ((x) & GENMASK(2, 0))
-+#define ANA_CPUQ_8021_CFG_CPUQ_CCM_VAL_M                  GENMASK(2, 0)
-+
-+#define ANA_DSCP_CFG_RSZ                                  0x4
-+
-+#define ANA_DSCP_CFG_DP_DSCP_VAL                          BIT(11)
-+#define ANA_DSCP_CFG_QOS_DSCP_VAL(x)                      (((x) << 8) & GENMASK(10, 8))
-+#define ANA_DSCP_CFG_QOS_DSCP_VAL_M                       GENMASK(10, 8)
-+#define ANA_DSCP_CFG_QOS_DSCP_VAL_X(x)                    (((x) & GENMASK(10, 8)) >> 8)
-+#define ANA_DSCP_CFG_DSCP_TRANSLATE_VAL(x)                (((x) << 2) & GENMASK(7, 2))
-+#define ANA_DSCP_CFG_DSCP_TRANSLATE_VAL_M                 GENMASK(7, 2)
-+#define ANA_DSCP_CFG_DSCP_TRANSLATE_VAL_X(x)              (((x) & GENMASK(7, 2)) >> 2)
-+#define ANA_DSCP_CFG_DSCP_TRUST_ENA                       BIT(1)
-+#define ANA_DSCP_CFG_DSCP_REWR_ENA                        BIT(0)
-+
-+#define ANA_DSCP_REWR_CFG_RSZ                             0x4
-+
-+#define ANA_VCAP_RNG_TYPE_CFG_RSZ                         0x4
-+
-+#define ANA_VCAP_RNG_VAL_CFG_RSZ                          0x4
-+
-+#define ANA_VCAP_RNG_VAL_CFG_VCAP_RNG_MIN_VAL(x)          (((x) << 16) & GENMASK(31, 16))
-+#define ANA_VCAP_RNG_VAL_CFG_VCAP_RNG_MIN_VAL_M           GENMASK(31, 16)
-+#define ANA_VCAP_RNG_VAL_CFG_VCAP_RNG_MIN_VAL_X(x)        (((x) & GENMASK(31, 16)) >> 16)
-+#define ANA_VCAP_RNG_VAL_CFG_VCAP_RNG_MAX_VAL(x)          ((x) & GENMASK(15, 0))
-+#define ANA_VCAP_RNG_VAL_CFG_VCAP_RNG_MAX_VAL_M           GENMASK(15, 0)
-+
-+#define ANA_VRAP_CFG_VRAP_VLAN_AWARE_ENA                  BIT(12)
-+#define ANA_VRAP_CFG_VRAP_VID(x)                          ((x) & GENMASK(11, 0))
-+#define ANA_VRAP_CFG_VRAP_VID_M                           GENMASK(11, 0)
-+
-+#define ANA_DISCARD_CFG_DROP_TAGGING_ISDX0                BIT(3)
-+#define ANA_DISCARD_CFG_DROP_CTRLPROT_ISDX0               BIT(2)
-+#define ANA_DISCARD_CFG_DROP_TAGGING_S2_ENA               BIT(1)
-+#define ANA_DISCARD_CFG_DROP_CTRLPROT_S2_ENA              BIT(0)
-+
-+#define ANA_FID_CFG_VID_MC_ENA                            BIT(0)
-+
-+#define ANA_POL_PIR_CFG_GSZ                               0x20
-+
-+#define ANA_POL_PIR_CFG_PIR_RATE(x)                       (((x) << 6) & GENMASK(20, 6))
-+#define ANA_POL_PIR_CFG_PIR_RATE_M                        GENMASK(20, 6)
-+#define ANA_POL_PIR_CFG_PIR_RATE_X(x)                     (((x) & GENMASK(20, 6)) >> 6)
-+#define ANA_POL_PIR_CFG_PIR_BURST(x)                      ((x) & GENMASK(5, 0))
-+#define ANA_POL_PIR_CFG_PIR_BURST_M                       GENMASK(5, 0)
-+
-+#define ANA_POL_CIR_CFG_GSZ                               0x20
-+
-+#define ANA_POL_CIR_CFG_CIR_RATE(x)                       (((x) << 6) & GENMASK(20, 6))
-+#define ANA_POL_CIR_CFG_CIR_RATE_M                        GENMASK(20, 6)
-+#define ANA_POL_CIR_CFG_CIR_RATE_X(x)                     (((x) & GENMASK(20, 6)) >> 6)
-+#define ANA_POL_CIR_CFG_CIR_BURST(x)                      ((x) & GENMASK(5, 0))
-+#define ANA_POL_CIR_CFG_CIR_BURST_M                       GENMASK(5, 0)
-+
-+#define ANA_POL_MODE_CFG_GSZ                              0x20
-+
-+#define ANA_POL_MODE_CFG_IPG_SIZE(x)                      (((x) << 5) & GENMASK(9, 5))
-+#define ANA_POL_MODE_CFG_IPG_SIZE_M                       GENMASK(9, 5)
-+#define ANA_POL_MODE_CFG_IPG_SIZE_X(x)                    (((x) & GENMASK(9, 5)) >> 5)
-+#define ANA_POL_MODE_CFG_FRM_MODE(x)                      (((x) << 3) & GENMASK(4, 3))
-+#define ANA_POL_MODE_CFG_FRM_MODE_M                       GENMASK(4, 3)
-+#define ANA_POL_MODE_CFG_FRM_MODE_X(x)                    (((x) & GENMASK(4, 3)) >> 3)
-+#define ANA_POL_MODE_CFG_DLB_COUPLED                      BIT(2)
-+#define ANA_POL_MODE_CFG_CIR_ENA                          BIT(1)
-+#define ANA_POL_MODE_CFG_OVERSHOOT_ENA                    BIT(0)
-+
-+#define ANA_POL_PIR_STATE_GSZ                             0x20
-+
-+#define ANA_POL_CIR_STATE_GSZ                             0x20
-+
-+#define ANA_POL_STATE_GSZ                                 0x20
-+
-+#define ANA_POL_FLOWC_RSZ                                 0x4
-+
-+#define ANA_POL_FLOWC_POL_FLOWC                           BIT(0)
-+
-+#define ANA_POL_HYST_POL_FC_HYST(x)                       (((x) << 4) & GENMASK(9, 4))
-+#define ANA_POL_HYST_POL_FC_HYST_M                        GENMASK(9, 4)
-+#define ANA_POL_HYST_POL_FC_HYST_X(x)                     (((x) & GENMASK(9, 4)) >> 4)
-+#define ANA_POL_HYST_POL_STOP_HYST(x)                     ((x) & GENMASK(3, 0))
-+#define ANA_POL_HYST_POL_STOP_HYST_M                      GENMASK(3, 0)
-+
-+#define ANA_POL_MISC_CFG_POL_CLOSE_ALL                    BIT(1)
-+#define ANA_POL_MISC_CFG_POL_LEAK_DIS                     BIT(0)
-+
-+#endif
---- /dev/null
-+++ b/include/soc/mscc/ocelot_dev.h
-@@ -0,0 +1,275 @@
-+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
-+/*
-+ * Microsemi Ocelot Switch driver
-+ *
-+ * Copyright (c) 2017 Microsemi Corporation
-+ */
-+
-+#ifndef _MSCC_OCELOT_DEV_H_
-+#define _MSCC_OCELOT_DEV_H_
-+
-+#define DEV_CLOCK_CFG                                     0x0
-+
-+#define DEV_CLOCK_CFG_MAC_TX_RST                          BIT(7)
-+#define DEV_CLOCK_CFG_MAC_RX_RST                          BIT(6)
-+#define DEV_CLOCK_CFG_PCS_TX_RST                          BIT(5)
-+#define DEV_CLOCK_CFG_PCS_RX_RST                          BIT(4)
-+#define DEV_CLOCK_CFG_PORT_RST                            BIT(3)
-+#define DEV_CLOCK_CFG_PHY_RST                             BIT(2)
-+#define DEV_CLOCK_CFG_LINK_SPEED(x)                       ((x) & GENMASK(1, 0))
-+#define DEV_CLOCK_CFG_LINK_SPEED_M                        GENMASK(1, 0)
-+
-+#define DEV_PORT_MISC                                     0x4
-+
-+#define DEV_PORT_MISC_FWD_ERROR_ENA                       BIT(4)
-+#define DEV_PORT_MISC_FWD_PAUSE_ENA                       BIT(3)
-+#define DEV_PORT_MISC_FWD_CTRL_ENA                        BIT(2)
-+#define DEV_PORT_MISC_DEV_LOOP_ENA                        BIT(1)
-+#define DEV_PORT_MISC_HDX_FAST_DIS                        BIT(0)
-+
-+#define DEV_EVENTS                                        0x8
-+
-+#define DEV_EEE_CFG                                       0xc
-+
-+#define DEV_EEE_CFG_EEE_ENA                               BIT(22)
-+#define DEV_EEE_CFG_EEE_TIMER_AGE(x)                      (((x) << 15) & GENMASK(21, 15))
-+#define DEV_EEE_CFG_EEE_TIMER_AGE_M                       GENMASK(21, 15)
-+#define DEV_EEE_CFG_EEE_TIMER_AGE_X(x)                    (((x) & GENMASK(21, 15)) >> 15)
-+#define DEV_EEE_CFG_EEE_TIMER_WAKEUP(x)                   (((x) << 8) & GENMASK(14, 8))
-+#define DEV_EEE_CFG_EEE_TIMER_WAKEUP_M                    GENMASK(14, 8)
-+#define DEV_EEE_CFG_EEE_TIMER_WAKEUP_X(x)                 (((x) & GENMASK(14, 8)) >> 8)
-+#define DEV_EEE_CFG_EEE_TIMER_HOLDOFF(x)                  (((x) << 1) & GENMASK(7, 1))
-+#define DEV_EEE_CFG_EEE_TIMER_HOLDOFF_M                   GENMASK(7, 1)
-+#define DEV_EEE_CFG_EEE_TIMER_HOLDOFF_X(x)                (((x) & GENMASK(7, 1)) >> 1)
-+#define DEV_EEE_CFG_PORT_LPI                              BIT(0)
-+
-+#define DEV_RX_PATH_DELAY                                 0x10
-+
-+#define DEV_TX_PATH_DELAY                                 0x14
-+
-+#define DEV_PTP_PREDICT_CFG                               0x18
-+
-+#define DEV_PTP_PREDICT_CFG_PTP_PHY_PREDICT_CFG(x)        (((x) << 4) & GENMASK(11, 4))
-+#define DEV_PTP_PREDICT_CFG_PTP_PHY_PREDICT_CFG_M         GENMASK(11, 4)
-+#define DEV_PTP_PREDICT_CFG_PTP_PHY_PREDICT_CFG_X(x)      (((x) & GENMASK(11, 4)) >> 4)
-+#define DEV_PTP_PREDICT_CFG_PTP_PHASE_PREDICT_CFG(x)      ((x) & GENMASK(3, 0))
-+#define DEV_PTP_PREDICT_CFG_PTP_PHASE_PREDICT_CFG_M       GENMASK(3, 0)
-+
-+#define DEV_MAC_ENA_CFG                                   0x1c
-+
-+#define DEV_MAC_ENA_CFG_RX_ENA                            BIT(4)
-+#define DEV_MAC_ENA_CFG_TX_ENA                            BIT(0)
-+
-+#define DEV_MAC_MODE_CFG                                  0x20
-+
-+#define DEV_MAC_MODE_CFG_FC_WORD_SYNC_ENA                 BIT(8)
-+#define DEV_MAC_MODE_CFG_GIGA_MODE_ENA                    BIT(4)
-+#define DEV_MAC_MODE_CFG_FDX_ENA                          BIT(0)
-+
-+#define DEV_MAC_MAXLEN_CFG                                0x24
-+
-+#define DEV_MAC_TAGS_CFG                                  0x28
-+
-+#define DEV_MAC_TAGS_CFG_TAG_ID(x)                        (((x) << 16) & GENMASK(31, 16))
-+#define DEV_MAC_TAGS_CFG_TAG_ID_M                         GENMASK(31, 16)
-+#define DEV_MAC_TAGS_CFG_TAG_ID_X(x)                      (((x) & GENMASK(31, 16)) >> 16)
-+#define DEV_MAC_TAGS_CFG_VLAN_LEN_AWR_ENA                 BIT(2)
-+#define DEV_MAC_TAGS_CFG_PB_ENA                           BIT(1)
-+#define DEV_MAC_TAGS_CFG_VLAN_AWR_ENA                     BIT(0)
-+
-+#define DEV_MAC_ADV_CHK_CFG                               0x2c
-+
-+#define DEV_MAC_ADV_CHK_CFG_LEN_DROP_ENA                  BIT(0)
-+
-+#define DEV_MAC_IFG_CFG                                   0x30
-+
-+#define DEV_MAC_IFG_CFG_RESTORE_OLD_IPG_CHECK             BIT(17)
-+#define DEV_MAC_IFG_CFG_REDUCED_TX_IFG                    BIT(16)
-+#define DEV_MAC_IFG_CFG_TX_IFG(x)                         (((x) << 8) & GENMASK(12, 8))
-+#define DEV_MAC_IFG_CFG_TX_IFG_M                          GENMASK(12, 8)
-+#define DEV_MAC_IFG_CFG_TX_IFG_X(x)                       (((x) & GENMASK(12, 8)) >> 8)
-+#define DEV_MAC_IFG_CFG_RX_IFG2(x)                        (((x) << 4) & GENMASK(7, 4))
-+#define DEV_MAC_IFG_CFG_RX_IFG2_M                         GENMASK(7, 4)
-+#define DEV_MAC_IFG_CFG_RX_IFG2_X(x)                      (((x) & GENMASK(7, 4)) >> 4)
-+#define DEV_MAC_IFG_CFG_RX_IFG1(x)                        ((x) & GENMASK(3, 0))
-+#define DEV_MAC_IFG_CFG_RX_IFG1_M                         GENMASK(3, 0)
-+
-+#define DEV_MAC_HDX_CFG                                   0x34
-+
-+#define DEV_MAC_HDX_CFG_BYPASS_COL_SYNC                   BIT(26)
-+#define DEV_MAC_HDX_CFG_OB_ENA                            BIT(25)
-+#define DEV_MAC_HDX_CFG_WEXC_DIS                          BIT(24)
-+#define DEV_MAC_HDX_CFG_SEED(x)                           (((x) << 16) & GENMASK(23, 16))
-+#define DEV_MAC_HDX_CFG_SEED_M                            GENMASK(23, 16)
-+#define DEV_MAC_HDX_CFG_SEED_X(x)                         (((x) & GENMASK(23, 16)) >> 16)
-+#define DEV_MAC_HDX_CFG_SEED_LOAD                         BIT(12)
-+#define DEV_MAC_HDX_CFG_RETRY_AFTER_EXC_COL_ENA           BIT(8)
-+#define DEV_MAC_HDX_CFG_LATE_COL_POS(x)                   ((x) & GENMASK(6, 0))
-+#define DEV_MAC_HDX_CFG_LATE_COL_POS_M                    GENMASK(6, 0)
-+
-+#define DEV_MAC_DBG_CFG                                   0x38
-+
-+#define DEV_MAC_DBG_CFG_TBI_MODE                          BIT(4)
-+#define DEV_MAC_DBG_CFG_IFG_CRS_EXT_CHK_ENA               BIT(0)
-+
-+#define DEV_MAC_FC_MAC_LOW_CFG                            0x3c
-+
-+#define DEV_MAC_FC_MAC_HIGH_CFG                           0x40
-+
-+#define DEV_MAC_STICKY                                    0x44
-+
-+#define DEV_MAC_STICKY_RX_IPG_SHRINK_STICKY               BIT(9)
-+#define DEV_MAC_STICKY_RX_PREAM_SHRINK_STICKY             BIT(8)
-+#define DEV_MAC_STICKY_RX_CARRIER_EXT_STICKY              BIT(7)
-+#define DEV_MAC_STICKY_RX_CARRIER_EXT_ERR_STICKY          BIT(6)
-+#define DEV_MAC_STICKY_RX_JUNK_STICKY                     BIT(5)
-+#define DEV_MAC_STICKY_TX_RETRANSMIT_STICKY               BIT(4)
-+#define DEV_MAC_STICKY_TX_JAM_STICKY                      BIT(3)
-+#define DEV_MAC_STICKY_TX_FIFO_OFLW_STICKY                BIT(2)
-+#define DEV_MAC_STICKY_TX_FRM_LEN_OVR_STICKY              BIT(1)
-+#define DEV_MAC_STICKY_TX_ABORT_STICKY                    BIT(0)
-+
-+#define PCS1G_CFG                                         0x48
-+
-+#define PCS1G_CFG_LINK_STATUS_TYPE                        BIT(4)
-+#define PCS1G_CFG_AN_LINK_CTRL_ENA                        BIT(1)
-+#define PCS1G_CFG_PCS_ENA                                 BIT(0)
-+
-+#define PCS1G_MODE_CFG                                    0x4c
-+
-+#define PCS1G_MODE_CFG_UNIDIR_MODE_ENA                    BIT(4)
-+#define PCS1G_MODE_CFG_SGMII_MODE_ENA                     BIT(0)
-+
-+#define PCS1G_SD_CFG                                      0x50
-+
-+#define PCS1G_SD_CFG_SD_SEL                               BIT(8)
-+#define PCS1G_SD_CFG_SD_POL                               BIT(4)
-+#define PCS1G_SD_CFG_SD_ENA                               BIT(0)
-+
-+#define PCS1G_ANEG_CFG                                    0x54
-+
-+#define PCS1G_ANEG_CFG_ADV_ABILITY(x)                     (((x) << 16) & GENMASK(31, 16))
-+#define PCS1G_ANEG_CFG_ADV_ABILITY_M                      GENMASK(31, 16)
-+#define PCS1G_ANEG_CFG_ADV_ABILITY_X(x)                   (((x) & GENMASK(31, 16)) >> 16)
-+#define PCS1G_ANEG_CFG_SW_RESOLVE_ENA                     BIT(8)
-+#define PCS1G_ANEG_CFG_ANEG_RESTART_ONE_SHOT              BIT(1)
-+#define PCS1G_ANEG_CFG_ANEG_ENA                           BIT(0)
-+
-+#define PCS1G_ANEG_NP_CFG                                 0x58
-+
-+#define PCS1G_ANEG_NP_CFG_NP_TX(x)                        (((x) << 16) & GENMASK(31, 16))
-+#define PCS1G_ANEG_NP_CFG_NP_TX_M                         GENMASK(31, 16)
-+#define PCS1G_ANEG_NP_CFG_NP_TX_X(x)                      (((x) & GENMASK(31, 16)) >> 16)
-+#define PCS1G_ANEG_NP_CFG_NP_LOADED_ONE_SHOT              BIT(0)
-+
-+#define PCS1G_LB_CFG                                      0x5c
-+
-+#define PCS1G_LB_CFG_RA_ENA                               BIT(4)
-+#define PCS1G_LB_CFG_GMII_PHY_LB_ENA                      BIT(1)
-+#define PCS1G_LB_CFG_TBI_HOST_LB_ENA                      BIT(0)
-+
-+#define PCS1G_DBG_CFG                                     0x60
-+
-+#define PCS1G_DBG_CFG_UDLT                                BIT(0)
-+
-+#define PCS1G_CDET_CFG                                    0x64
-+
-+#define PCS1G_CDET_CFG_CDET_ENA                           BIT(0)
-+
-+#define PCS1G_ANEG_STATUS                                 0x68
-+
-+#define PCS1G_ANEG_STATUS_LP_ADV_ABILITY(x)               (((x) << 16) & GENMASK(31, 16))
-+#define PCS1G_ANEG_STATUS_LP_ADV_ABILITY_M                GENMASK(31, 16)
-+#define PCS1G_ANEG_STATUS_LP_ADV_ABILITY_X(x)             (((x) & GENMASK(31, 16)) >> 16)
-+#define PCS1G_ANEG_STATUS_PR                              BIT(4)
-+#define PCS1G_ANEG_STATUS_PAGE_RX_STICKY                  BIT(3)
-+#define PCS1G_ANEG_STATUS_ANEG_COMPLETE                   BIT(0)
-+
-+#define PCS1G_ANEG_NP_STATUS                              0x6c
-+
-+#define PCS1G_LINK_STATUS                                 0x70
-+
-+#define PCS1G_LINK_STATUS_DELAY_VAR(x)                    (((x) << 12) & GENMASK(15, 12))
-+#define PCS1G_LINK_STATUS_DELAY_VAR_M                     GENMASK(15, 12)
-+#define PCS1G_LINK_STATUS_DELAY_VAR_X(x)                  (((x) & GENMASK(15, 12)) >> 12)
-+#define PCS1G_LINK_STATUS_SIGNAL_DETECT                   BIT(8)
-+#define PCS1G_LINK_STATUS_LINK_STATUS                     BIT(4)
-+#define PCS1G_LINK_STATUS_SYNC_STATUS                     BIT(0)
-+
-+#define PCS1G_LINK_DOWN_CNT                               0x74
-+
-+#define PCS1G_STICKY                                      0x78
-+
-+#define PCS1G_STICKY_LINK_DOWN_STICKY                     BIT(4)
-+#define PCS1G_STICKY_OUT_OF_SYNC_STICKY                   BIT(0)
-+
-+#define PCS1G_DEBUG_STATUS                                0x7c
-+
-+#define PCS1G_LPI_CFG                                     0x80
-+
-+#define PCS1G_LPI_CFG_QSGMII_MS_SEL                       BIT(20)
-+#define PCS1G_LPI_CFG_RX_LPI_OUT_DIS                      BIT(17)
-+#define PCS1G_LPI_CFG_LPI_TESTMODE                        BIT(16)
-+#define PCS1G_LPI_CFG_LPI_RX_WTIM(x)                      (((x) << 4) & GENMASK(5, 4))
-+#define PCS1G_LPI_CFG_LPI_RX_WTIM_M                       GENMASK(5, 4)
-+#define PCS1G_LPI_CFG_LPI_RX_WTIM_X(x)                    (((x) & GENMASK(5, 4)) >> 4)
-+#define PCS1G_LPI_CFG_TX_ASSERT_LPIDLE                    BIT(0)
-+
-+#define PCS1G_LPI_WAKE_ERROR_CNT                          0x84
-+
-+#define PCS1G_LPI_STATUS                                  0x88
-+
-+#define PCS1G_LPI_STATUS_RX_LPI_FAIL                      BIT(16)
-+#define PCS1G_LPI_STATUS_RX_LPI_EVENT_STICKY              BIT(12)
-+#define PCS1G_LPI_STATUS_RX_QUIET                         BIT(9)
-+#define PCS1G_LPI_STATUS_RX_LPI_MODE                      BIT(8)
-+#define PCS1G_LPI_STATUS_TX_LPI_EVENT_STICKY              BIT(4)
-+#define PCS1G_LPI_STATUS_TX_QUIET                         BIT(1)
-+#define PCS1G_LPI_STATUS_TX_LPI_MODE                      BIT(0)
-+
-+#define PCS1G_TSTPAT_MODE_CFG                             0x8c
-+
-+#define PCS1G_TSTPAT_STATUS                               0x90
-+
-+#define PCS1G_TSTPAT_STATUS_JTP_ERR_CNT(x)                (((x) << 8) & GENMASK(15, 8))
-+#define PCS1G_TSTPAT_STATUS_JTP_ERR_CNT_M                 GENMASK(15, 8)
-+#define PCS1G_TSTPAT_STATUS_JTP_ERR_CNT_X(x)              (((x) & GENMASK(15, 8)) >> 8)
-+#define PCS1G_TSTPAT_STATUS_JTP_ERR                       BIT(4)
-+#define PCS1G_TSTPAT_STATUS_JTP_LOCK                      BIT(0)
-+
-+#define DEV_PCS_FX100_CFG                                 0x94
-+
-+#define DEV_PCS_FX100_CFG_SD_SEL                          BIT(26)
-+#define DEV_PCS_FX100_CFG_SD_POL                          BIT(25)
-+#define DEV_PCS_FX100_CFG_SD_ENA                          BIT(24)
-+#define DEV_PCS_FX100_CFG_LOOPBACK_ENA                    BIT(20)
-+#define DEV_PCS_FX100_CFG_SWAP_MII_ENA                    BIT(16)
-+#define DEV_PCS_FX100_CFG_RXBITSEL(x)                     (((x) << 12) & GENMASK(15, 12))
-+#define DEV_PCS_FX100_CFG_RXBITSEL_M                      GENMASK(15, 12)
-+#define DEV_PCS_FX100_CFG_RXBITSEL_X(x)                   (((x) & GENMASK(15, 12)) >> 12)
-+#define DEV_PCS_FX100_CFG_SIGDET_CFG(x)                   (((x) << 9) & GENMASK(10, 9))
-+#define DEV_PCS_FX100_CFG_SIGDET_CFG_M                    GENMASK(10, 9)
-+#define DEV_PCS_FX100_CFG_SIGDET_CFG_X(x)                 (((x) & GENMASK(10, 9)) >> 9)
-+#define DEV_PCS_FX100_CFG_LINKHYST_TM_ENA                 BIT(8)
-+#define DEV_PCS_FX100_CFG_LINKHYSTTIMER(x)                (((x) << 4) & GENMASK(7, 4))
-+#define DEV_PCS_FX100_CFG_LINKHYSTTIMER_M                 GENMASK(7, 4)
-+#define DEV_PCS_FX100_CFG_LINKHYSTTIMER_X(x)              (((x) & GENMASK(7, 4)) >> 4)
-+#define DEV_PCS_FX100_CFG_UNIDIR_MODE_ENA                 BIT(3)
-+#define DEV_PCS_FX100_CFG_FEFCHK_ENA                      BIT(2)
-+#define DEV_PCS_FX100_CFG_FEFGEN_ENA                      BIT(1)
-+#define DEV_PCS_FX100_CFG_PCS_ENA                         BIT(0)
-+
-+#define DEV_PCS_FX100_STATUS                              0x98
-+
-+#define DEV_PCS_FX100_STATUS_EDGE_POS_PTP(x)              (((x) << 8) & GENMASK(11, 8))
-+#define DEV_PCS_FX100_STATUS_EDGE_POS_PTP_M               GENMASK(11, 8)
-+#define DEV_PCS_FX100_STATUS_EDGE_POS_PTP_X(x)            (((x) & GENMASK(11, 8)) >> 8)
-+#define DEV_PCS_FX100_STATUS_PCS_ERROR_STICKY             BIT(7)
-+#define DEV_PCS_FX100_STATUS_FEF_FOUND_STICKY             BIT(6)
-+#define DEV_PCS_FX100_STATUS_SSD_ERROR_STICKY             BIT(5)
-+#define DEV_PCS_FX100_STATUS_SYNC_LOST_STICKY             BIT(4)
-+#define DEV_PCS_FX100_STATUS_FEF_STATUS                   BIT(2)
-+#define DEV_PCS_FX100_STATUS_SIGNAL_DETECT                BIT(1)
-+#define DEV_PCS_FX100_STATUS_SYNC_STATUS                  BIT(0)
-+
-+#endif
---- /dev/null
-+++ b/include/soc/mscc/ocelot_qsys.h
-@@ -0,0 +1,270 @@
-+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
-+/*
-+ * Microsemi Ocelot Switch driver
-+ *
-+ * Copyright (c) 2017 Microsemi Corporation
-+ */
-+
-+#ifndef _MSCC_OCELOT_QSYS_H_
-+#define _MSCC_OCELOT_QSYS_H_
-+
-+#define QSYS_PORT_MODE_RSZ                                0x4
-+
-+#define QSYS_PORT_MODE_DEQUEUE_DIS                        BIT(1)
-+#define QSYS_PORT_MODE_DEQUEUE_LATE                       BIT(0)
-+
-+#define QSYS_SWITCH_PORT_MODE_RSZ                         0x4
-+
-+#define QSYS_SWITCH_PORT_MODE_PORT_ENA                    BIT(14)
-+#define QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(x)             (((x) << 11) & GENMASK(13, 11))
-+#define QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG_M              GENMASK(13, 11)
-+#define QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG_X(x)           (((x) & GENMASK(13, 11)) >> 11)
-+#define QSYS_SWITCH_PORT_MODE_YEL_RSRVD                   BIT(10)
-+#define QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE           BIT(9)
-+#define QSYS_SWITCH_PORT_MODE_TX_PFC_ENA(x)               (((x) << 1) & GENMASK(8, 1))
-+#define QSYS_SWITCH_PORT_MODE_TX_PFC_ENA_M                GENMASK(8, 1)
-+#define QSYS_SWITCH_PORT_MODE_TX_PFC_ENA_X(x)             (((x) & GENMASK(8, 1)) >> 1)
-+#define QSYS_SWITCH_PORT_MODE_TX_PFC_MODE                 BIT(0)
-+
-+#define QSYS_STAT_CNT_CFG_TX_GREEN_CNT_MODE               BIT(5)
-+#define QSYS_STAT_CNT_CFG_TX_YELLOW_CNT_MODE              BIT(4)
-+#define QSYS_STAT_CNT_CFG_DROP_GREEN_CNT_MODE             BIT(3)
-+#define QSYS_STAT_CNT_CFG_DROP_YELLOW_CNT_MODE            BIT(2)
-+#define QSYS_STAT_CNT_CFG_DROP_COUNT_ONCE                 BIT(1)
-+#define QSYS_STAT_CNT_CFG_DROP_COUNT_EGRESS               BIT(0)
-+
-+#define QSYS_EEE_CFG_RSZ                                  0x4
-+
-+#define QSYS_EEE_THRES_EEE_HIGH_BYTES(x)                  (((x) << 8) & GENMASK(15, 8))
-+#define QSYS_EEE_THRES_EEE_HIGH_BYTES_M                   GENMASK(15, 8)
-+#define QSYS_EEE_THRES_EEE_HIGH_BYTES_X(x)                (((x) & GENMASK(15, 8)) >> 8)
-+#define QSYS_EEE_THRES_EEE_HIGH_FRAMES(x)                 ((x) & GENMASK(7, 0))
-+#define QSYS_EEE_THRES_EEE_HIGH_FRAMES_M                  GENMASK(7, 0)
-+
-+#define QSYS_SW_STATUS_RSZ                                0x4
-+
-+#define QSYS_EXT_CPU_CFG_EXT_CPU_PORT(x)                  (((x) << 8) & GENMASK(12, 8))
-+#define QSYS_EXT_CPU_CFG_EXT_CPU_PORT_M                   GENMASK(12, 8)
-+#define QSYS_EXT_CPU_CFG_EXT_CPU_PORT_X(x)                (((x) & GENMASK(12, 8)) >> 8)
-+#define QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK(x)                  ((x) & GENMASK(7, 0))
-+#define QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M                   GENMASK(7, 0)
-+
-+#define QSYS_QMAP_GSZ                                     0x4
-+
-+#define QSYS_QMAP_SE_BASE(x)                              (((x) << 5) & GENMASK(12, 5))
-+#define QSYS_QMAP_SE_BASE_M                               GENMASK(12, 5)
-+#define QSYS_QMAP_SE_BASE_X(x)                            (((x) & GENMASK(12, 5)) >> 5)
-+#define QSYS_QMAP_SE_IDX_SEL(x)                           (((x) << 2) & GENMASK(4, 2))
-+#define QSYS_QMAP_SE_IDX_SEL_M                            GENMASK(4, 2)
-+#define QSYS_QMAP_SE_IDX_SEL_X(x)                         (((x) & GENMASK(4, 2)) >> 2)
-+#define QSYS_QMAP_SE_INP_SEL(x)                           ((x) & GENMASK(1, 0))
-+#define QSYS_QMAP_SE_INP_SEL_M                            GENMASK(1, 0)
-+
-+#define QSYS_ISDX_SGRP_GSZ                                0x4
-+
-+#define QSYS_TIMED_FRAME_ENTRY_GSZ                        0x4
-+
-+#define QSYS_TFRM_MISC_TIMED_CANCEL_SLOT(x)               (((x) << 9) & GENMASK(18, 9))
-+#define QSYS_TFRM_MISC_TIMED_CANCEL_SLOT_M                GENMASK(18, 9)
-+#define QSYS_TFRM_MISC_TIMED_CANCEL_SLOT_X(x)             (((x) & GENMASK(18, 9)) >> 9)
-+#define QSYS_TFRM_MISC_TIMED_CANCEL_1SHOT                 BIT(8)
-+#define QSYS_TFRM_MISC_TIMED_SLOT_MODE_MC                 BIT(7)
-+#define QSYS_TFRM_MISC_TIMED_ENTRY_FAST_CNT(x)            ((x) & GENMASK(6, 0))
-+#define QSYS_TFRM_MISC_TIMED_ENTRY_FAST_CNT_M             GENMASK(6, 0)
-+
-+#define QSYS_RED_PROFILE_RSZ                              0x4
-+
-+#define QSYS_RED_PROFILE_WM_RED_LOW(x)                    (((x) << 8) & GENMASK(15, 8))
-+#define QSYS_RED_PROFILE_WM_RED_LOW_M                     GENMASK(15, 8)
-+#define QSYS_RED_PROFILE_WM_RED_LOW_X(x)                  (((x) & GENMASK(15, 8)) >> 8)
-+#define QSYS_RED_PROFILE_WM_RED_HIGH(x)                   ((x) & GENMASK(7, 0))
-+#define QSYS_RED_PROFILE_WM_RED_HIGH_M                    GENMASK(7, 0)
-+
-+#define QSYS_RES_CFG_GSZ                                  0x8
-+
-+#define QSYS_RES_STAT_GSZ                                 0x8
-+
-+#define QSYS_RES_STAT_INUSE(x)                            (((x) << 12) & GENMASK(23, 12))
-+#define QSYS_RES_STAT_INUSE_M                             GENMASK(23, 12)
-+#define QSYS_RES_STAT_INUSE_X(x)                          (((x) & GENMASK(23, 12)) >> 12)
-+#define QSYS_RES_STAT_MAXUSE(x)                           ((x) & GENMASK(11, 0))
-+#define QSYS_RES_STAT_MAXUSE_M                            GENMASK(11, 0)
-+
-+#define QSYS_EVENTS_CORE_EV_FDC(x)                        (((x) << 2) & GENMASK(4, 2))
-+#define QSYS_EVENTS_CORE_EV_FDC_M                         GENMASK(4, 2)
-+#define QSYS_EVENTS_CORE_EV_FDC_X(x)                      (((x) & GENMASK(4, 2)) >> 2)
-+#define QSYS_EVENTS_CORE_EV_FRD(x)                        ((x) & GENMASK(1, 0))
-+#define QSYS_EVENTS_CORE_EV_FRD_M                         GENMASK(1, 0)
-+
-+#define QSYS_QMAXSDU_CFG_0_RSZ                            0x4
-+
-+#define QSYS_QMAXSDU_CFG_1_RSZ                            0x4
-+
-+#define QSYS_QMAXSDU_CFG_2_RSZ                            0x4
-+
-+#define QSYS_QMAXSDU_CFG_3_RSZ                            0x4
-+
-+#define QSYS_QMAXSDU_CFG_4_RSZ                            0x4
-+
-+#define QSYS_QMAXSDU_CFG_5_RSZ                            0x4
-+
-+#define QSYS_QMAXSDU_CFG_6_RSZ                            0x4
-+
-+#define QSYS_QMAXSDU_CFG_7_RSZ                            0x4
-+
-+#define QSYS_PREEMPTION_CFG_RSZ                           0x4
-+
-+#define QSYS_PREEMPTION_CFG_P_QUEUES(x)                   ((x) & GENMASK(7, 0))
-+#define QSYS_PREEMPTION_CFG_P_QUEUES_M                    GENMASK(7, 0)
-+#define QSYS_PREEMPTION_CFG_MM_ADD_FRAG_SIZE(x)           (((x) << 8) & GENMASK(9, 8))
-+#define QSYS_PREEMPTION_CFG_MM_ADD_FRAG_SIZE_M            GENMASK(9, 8)
-+#define QSYS_PREEMPTION_CFG_MM_ADD_FRAG_SIZE_X(x)         (((x) & GENMASK(9, 8)) >> 8)
-+#define QSYS_PREEMPTION_CFG_STRICT_IPG(x)                 (((x) << 12) & GENMASK(13, 12))
-+#define QSYS_PREEMPTION_CFG_STRICT_IPG_M                  GENMASK(13, 12)
-+#define QSYS_PREEMPTION_CFG_STRICT_IPG_X(x)               (((x) & GENMASK(13, 12)) >> 12)
-+#define QSYS_PREEMPTION_CFG_HOLD_ADVANCE(x)               (((x) << 16) & GENMASK(31, 16))
-+#define QSYS_PREEMPTION_CFG_HOLD_ADVANCE_M                GENMASK(31, 16)
-+#define QSYS_PREEMPTION_CFG_HOLD_ADVANCE_X(x)             (((x) & GENMASK(31, 16)) >> 16)
-+
-+#define QSYS_CIR_CFG_GSZ                                  0x80
-+
-+#define QSYS_CIR_CFG_CIR_RATE(x)                          (((x) << 6) & GENMASK(20, 6))
-+#define QSYS_CIR_CFG_CIR_RATE_M                           GENMASK(20, 6)
-+#define QSYS_CIR_CFG_CIR_RATE_X(x)                        (((x) & GENMASK(20, 6)) >> 6)
-+#define QSYS_CIR_CFG_CIR_BURST(x)                         ((x) & GENMASK(5, 0))
-+#define QSYS_CIR_CFG_CIR_BURST_M                          GENMASK(5, 0)
-+
-+#define QSYS_EIR_CFG_GSZ                                  0x80
-+
-+#define QSYS_EIR_CFG_EIR_RATE(x)                          (((x) << 7) & GENMASK(21, 7))
-+#define QSYS_EIR_CFG_EIR_RATE_M                           GENMASK(21, 7)
-+#define QSYS_EIR_CFG_EIR_RATE_X(x)                        (((x) & GENMASK(21, 7)) >> 7)
-+#define QSYS_EIR_CFG_EIR_BURST(x)                         (((x) << 1) & GENMASK(6, 1))
-+#define QSYS_EIR_CFG_EIR_BURST_M                          GENMASK(6, 1)
-+#define QSYS_EIR_CFG_EIR_BURST_X(x)                       (((x) & GENMASK(6, 1)) >> 1)
-+#define QSYS_EIR_CFG_EIR_MARK_ENA                         BIT(0)
-+
-+#define QSYS_SE_CFG_GSZ                                   0x80
-+
-+#define QSYS_SE_CFG_SE_DWRR_CNT(x)                        (((x) << 6) & GENMASK(9, 6))
-+#define QSYS_SE_CFG_SE_DWRR_CNT_M                         GENMASK(9, 6)
-+#define QSYS_SE_CFG_SE_DWRR_CNT_X(x)                      (((x) & GENMASK(9, 6)) >> 6)
-+#define QSYS_SE_CFG_SE_RR_ENA                             BIT(5)
-+#define QSYS_SE_CFG_SE_AVB_ENA                            BIT(4)
-+#define QSYS_SE_CFG_SE_FRM_MODE(x)                        (((x) << 2) & GENMASK(3, 2))
-+#define QSYS_SE_CFG_SE_FRM_MODE_M                         GENMASK(3, 2)
-+#define QSYS_SE_CFG_SE_FRM_MODE_X(x)                      (((x) & GENMASK(3, 2)) >> 2)
-+#define QSYS_SE_CFG_SE_EXC_ENA                            BIT(1)
-+#define QSYS_SE_CFG_SE_EXC_FWD                            BIT(0)
-+
-+#define QSYS_SE_DWRR_CFG_GSZ                              0x80
-+#define QSYS_SE_DWRR_CFG_RSZ                              0x4
-+
-+#define QSYS_SE_CONNECT_GSZ                               0x80
-+
-+#define QSYS_SE_CONNECT_SE_OUTP_IDX(x)                    (((x) << 17) & GENMASK(24, 17))
-+#define QSYS_SE_CONNECT_SE_OUTP_IDX_M                     GENMASK(24, 17)
-+#define QSYS_SE_CONNECT_SE_OUTP_IDX_X(x)                  (((x) & GENMASK(24, 17)) >> 17)
-+#define QSYS_SE_CONNECT_SE_INP_IDX(x)                     (((x) << 9) & GENMASK(16, 9))
-+#define QSYS_SE_CONNECT_SE_INP_IDX_M                      GENMASK(16, 9)
-+#define QSYS_SE_CONNECT_SE_INP_IDX_X(x)                   (((x) & GENMASK(16, 9)) >> 9)
-+#define QSYS_SE_CONNECT_SE_OUTP_CON(x)                    (((x) << 5) & GENMASK(8, 5))
-+#define QSYS_SE_CONNECT_SE_OUTP_CON_M                     GENMASK(8, 5)
-+#define QSYS_SE_CONNECT_SE_OUTP_CON_X(x)                  (((x) & GENMASK(8, 5)) >> 5)
-+#define QSYS_SE_CONNECT_SE_INP_CNT(x)                     (((x) << 1) & GENMASK(4, 1))
-+#define QSYS_SE_CONNECT_SE_INP_CNT_M                      GENMASK(4, 1)
-+#define QSYS_SE_CONNECT_SE_INP_CNT_X(x)                   (((x) & GENMASK(4, 1)) >> 1)
-+#define QSYS_SE_CONNECT_SE_TERMINAL                       BIT(0)
-+
-+#define QSYS_SE_DLB_SENSE_GSZ                             0x80
-+
-+#define QSYS_SE_DLB_SENSE_SE_DLB_PRIO(x)                  (((x) << 11) & GENMASK(13, 11))
-+#define QSYS_SE_DLB_SENSE_SE_DLB_PRIO_M                   GENMASK(13, 11)
-+#define QSYS_SE_DLB_SENSE_SE_DLB_PRIO_X(x)                (((x) & GENMASK(13, 11)) >> 11)
-+#define QSYS_SE_DLB_SENSE_SE_DLB_SPORT(x)                 (((x) << 7) & GENMASK(10, 7))
-+#define QSYS_SE_DLB_SENSE_SE_DLB_SPORT_M                  GENMASK(10, 7)
-+#define QSYS_SE_DLB_SENSE_SE_DLB_SPORT_X(x)               (((x) & GENMASK(10, 7)) >> 7)
-+#define QSYS_SE_DLB_SENSE_SE_DLB_DPORT(x)                 (((x) << 3) & GENMASK(6, 3))
-+#define QSYS_SE_DLB_SENSE_SE_DLB_DPORT_M                  GENMASK(6, 3)
-+#define QSYS_SE_DLB_SENSE_SE_DLB_DPORT_X(x)               (((x) & GENMASK(6, 3)) >> 3)
-+#define QSYS_SE_DLB_SENSE_SE_DLB_PRIO_ENA                 BIT(2)
-+#define QSYS_SE_DLB_SENSE_SE_DLB_SPORT_ENA                BIT(1)
-+#define QSYS_SE_DLB_SENSE_SE_DLB_DPORT_ENA                BIT(0)
-+
-+#define QSYS_CIR_STATE_GSZ                                0x80
-+
-+#define QSYS_CIR_STATE_CIR_LVL(x)                         (((x) << 4) & GENMASK(25, 4))
-+#define QSYS_CIR_STATE_CIR_LVL_M                          GENMASK(25, 4)
-+#define QSYS_CIR_STATE_CIR_LVL_X(x)                       (((x) & GENMASK(25, 4)) >> 4)
-+#define QSYS_CIR_STATE_SHP_TIME(x)                        ((x) & GENMASK(3, 0))
-+#define QSYS_CIR_STATE_SHP_TIME_M                         GENMASK(3, 0)
-+
-+#define QSYS_EIR_STATE_GSZ                                0x80
-+
-+#define QSYS_SE_STATE_GSZ                                 0x80
-+
-+#define QSYS_SE_STATE_SE_OUTP_LVL(x)                      (((x) << 1) & GENMASK(2, 1))
-+#define QSYS_SE_STATE_SE_OUTP_LVL_M                       GENMASK(2, 1)
-+#define QSYS_SE_STATE_SE_OUTP_LVL_X(x)                    (((x) & GENMASK(2, 1)) >> 1)
-+#define QSYS_SE_STATE_SE_WAS_YEL                          BIT(0)
-+
-+#define QSYS_HSCH_MISC_CFG_SE_CONNECT_VLD                 BIT(8)
-+#define QSYS_HSCH_MISC_CFG_FRM_ADJ(x)                     (((x) << 3) & GENMASK(7, 3))
-+#define QSYS_HSCH_MISC_CFG_FRM_ADJ_M                      GENMASK(7, 3)
-+#define QSYS_HSCH_MISC_CFG_FRM_ADJ_X(x)                   (((x) & GENMASK(7, 3)) >> 3)
-+#define QSYS_HSCH_MISC_CFG_LEAK_DIS                       BIT(2)
-+#define QSYS_HSCH_MISC_CFG_QSHP_EXC_ENA                   BIT(1)
-+#define QSYS_HSCH_MISC_CFG_PFC_BYP_UPD                    BIT(0)
-+
-+#define QSYS_TAG_CONFIG_RSZ                               0x4
-+
-+#define QSYS_TAG_CONFIG_ENABLE                            BIT(0)
-+#define QSYS_TAG_CONFIG_LINK_SPEED(x)                     (((x) << 4) & GENMASK(5, 4))
-+#define QSYS_TAG_CONFIG_LINK_SPEED_M                      GENMASK(5, 4)
-+#define QSYS_TAG_CONFIG_LINK_SPEED_X(x)                   (((x) & GENMASK(5, 4)) >> 4)
-+#define QSYS_TAG_CONFIG_INIT_GATE_STATE(x)                (((x) << 8) & GENMASK(15, 8))
-+#define QSYS_TAG_CONFIG_INIT_GATE_STATE_M                 GENMASK(15, 8)
-+#define QSYS_TAG_CONFIG_INIT_GATE_STATE_X(x)              (((x) & GENMASK(15, 8)) >> 8)
-+#define QSYS_TAG_CONFIG_SCH_TRAFFIC_QUEUES(x)             (((x) << 16) & GENMASK(23, 16))
-+#define QSYS_TAG_CONFIG_SCH_TRAFFIC_QUEUES_M              GENMASK(23, 16)
-+#define QSYS_TAG_CONFIG_SCH_TRAFFIC_QUEUES_X(x)           (((x) & GENMASK(23, 16)) >> 16)
-+
-+#define QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM(x)               ((x) & GENMASK(7, 0))
-+#define QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM_M                GENMASK(7, 0)
-+#define QSYS_TAS_PARAM_CFG_CTRL_ALWAYS_GUARD_BAND_SCH_Q   BIT(8)
-+#define QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE             BIT(16)
-+
-+#define QSYS_PORT_MAX_SDU_RSZ                             0x4
-+
-+#define QSYS_PARAM_CFG_REG_3_BASE_TIME_SEC_MSB(x)         ((x) & GENMASK(15, 0))
-+#define QSYS_PARAM_CFG_REG_3_BASE_TIME_SEC_MSB_M          GENMASK(15, 0)
-+#define QSYS_PARAM_CFG_REG_3_LIST_LENGTH(x)               (((x) << 16) & GENMASK(31, 16))
-+#define QSYS_PARAM_CFG_REG_3_LIST_LENGTH_M                GENMASK(31, 16)
-+#define QSYS_PARAM_CFG_REG_3_LIST_LENGTH_X(x)             (((x) & GENMASK(31, 16)) >> 16)
-+
-+#define QSYS_GCL_CFG_REG_1_GCL_ENTRY_NUM(x)               ((x) & GENMASK(5, 0))
-+#define QSYS_GCL_CFG_REG_1_GCL_ENTRY_NUM_M                GENMASK(5, 0)
-+#define QSYS_GCL_CFG_REG_1_GATE_STATE(x)                  (((x) << 8) & GENMASK(15, 8))
-+#define QSYS_GCL_CFG_REG_1_GATE_STATE_M                   GENMASK(15, 8)
-+#define QSYS_GCL_CFG_REG_1_GATE_STATE_X(x)                (((x) & GENMASK(15, 8)) >> 8)
-+
-+#define QSYS_PARAM_STATUS_REG_3_BASE_TIME_SEC_MSB(x)      ((x) & GENMASK(15, 0))
-+#define QSYS_PARAM_STATUS_REG_3_BASE_TIME_SEC_MSB_M       GENMASK(15, 0)
-+#define QSYS_PARAM_STATUS_REG_3_LIST_LENGTH(x)            (((x) << 16) & GENMASK(31, 16))
-+#define QSYS_PARAM_STATUS_REG_3_LIST_LENGTH_M             GENMASK(31, 16)
-+#define QSYS_PARAM_STATUS_REG_3_LIST_LENGTH_X(x)          (((x) & GENMASK(31, 16)) >> 16)
-+
-+#define QSYS_PARAM_STATUS_REG_8_CFG_CHG_TIME_SEC_MSB(x)   ((x) & GENMASK(15, 0))
-+#define QSYS_PARAM_STATUS_REG_8_CFG_CHG_TIME_SEC_MSB_M    GENMASK(15, 0)
-+#define QSYS_PARAM_STATUS_REG_8_OPER_GATE_STATE(x)        (((x) << 16) & GENMASK(23, 16))
-+#define QSYS_PARAM_STATUS_REG_8_OPER_GATE_STATE_M         GENMASK(23, 16)
-+#define QSYS_PARAM_STATUS_REG_8_OPER_GATE_STATE_X(x)      (((x) & GENMASK(23, 16)) >> 16)
-+#define QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING            BIT(24)
-+
-+#define QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM(x)            ((x) & GENMASK(5, 0))
-+#define QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM_M             GENMASK(5, 0)
-+#define QSYS_GCL_STATUS_REG_1_GATE_STATE(x)               (((x) << 8) & GENMASK(15, 8))
-+#define QSYS_GCL_STATUS_REG_1_GATE_STATE_M                GENMASK(15, 8)
-+#define QSYS_GCL_STATUS_REG_1_GATE_STATE_X(x)             (((x) & GENMASK(15, 8)) >> 8)
-+
-+#endif
diff --git a/target/linux/layerscape/patches-5.4/701-net-0386-net-dsa-felix-Add-PCS-operations-for-PHYLINK.patch b/target/linux/layerscape/patches-5.4/701-net-0386-net-dsa-felix-Add-PCS-operations-for-PHYLINK.patch
deleted file mode 100644
index 4286c3b49a..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0386-net-dsa-felix-Add-PCS-operations-for-PHYLINK.patch
+++ /dev/null
@@ -1,1087 +0,0 @@
-From 78d77114e35a491232c50e054f43c980bbf9d434 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Mon, 6 Jan 2020 03:34:17 +0200
-Subject: [PATCH] net: dsa: felix: Add PCS operations for PHYLINK
-
-Layerscape SoCs traditionally expose the SerDes configuration/status for
-Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register
-format that is compatible with clause 22 or clause 45 (depending on
-SerDes protocol). Each MAC has its own internal MDIO bus on which there
-is one or more of these PCS's, responding to commands at a configurable
-PHY address. The per-port internal MDIO bus (which is just for PCSs) is
-totally separate and has nothing to do with the dedicated external MDIO
-controller (which is just for PHYs), but the register map for the MDIO
-controller is the same.
-
-The VSC9959 (Felix) switch instantiated in the LS1028A is integrated
-in hardware with the ENETC PCS of its DSA master, and reuses its MDIO
-controller driver, so Felix has been made to depend on it in Kconfig.
-
- +------------------------------------------------------------------------+
- |                   +--------+ GMII (typically disabled via RCW)         |
- | ENETC PCI         |  ENETC |--------------------------+                |
- | Root Complex      | port 3 |-----------------------+  |                |
- | Integrated        +--------+                       |  |                |
- | Endpoint                                           |  |                |
- |                   +--------+ 2.5G GMII             |  |                |
- |                   |  ENETC |--------------+        |  |                |
- |                   | port 2 |-----------+  |        |  |                |
- |                   +--------+           |  |        |  |                |
- |                                     +--------+  +--------+             |
- |                                     |  Felix |  |  Felix |             |
- |                                     | port 4 |  | port 5 |             |
- |                                     +--------+  +--------+             |
- |                                                                        |
- | +--------+  +--------+  +--------+  +--------+  +--------+  +--------+ |
- | |  ENETC |  |  ENETC |  |  Felix |  |  Felix |  |  Felix |  |  Felix | |
- | | port 0 |  | port 1 |  | port 0 |  | port 1 |  | port 2 |  | port 3 | |
- +------------------------------------------------------------------------+
- |    ||||  SerDes |          ||||        ||||        ||||        ||||    |
- | +--------+block |       +--------------------------------------------+ |
- | |  ENETC |      |       |       ENETC port 2 internal MDIO bus       | |
- | | port 0 |      |       |  PCS         PCS          PCS        PCS   | |
- | |   PCS  |      |       |   0           1            2          3    | |
- +-----------------|------------------------------------------------------+
-        v          v           v           v            v          v
-     SGMII/      RGMII    QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X
-    USXGMII/   (bypasses
-  1000Base-X/   SerDes)
-  2500Base-X
-
-In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of
-the ENETC root complex, and has 2 BARs:
-- BAR 4: the switch's effective registers
-- BAR 0: the MDIO controller register map lended from ENETC port 2
-         (PF2), for accessing its associated PCS's.
-
-This explanation is necessary because the patch does some renaming
-"pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear
-a bit obtuse.
-
-The fact that the internal MDIO bus is "borrowed" is relevant because
-the register map is found in PF5 (the switch) but it triggers an access
-fault if PF2 (the ENETC DSA master) is not enabled. This is not treated
-in any way (and I don't think it can be treated).
-
-All of this is so SoC-specific, that it was contained as much as
-possible in the platform-integration file felix_vsc9959.c.
-
-We need to parse and pre-validate the device tree because of 2 reasons:
-- The PHY mode (SerDes protocol) cannot change at runtime due to SoC
-  design.
-- There is a circular dependency in that we need to know what clause the
-  PCS speaks in order to find it on the internal MDIO bus. But the
-  clause of the PCS depends on what phy-mode it is configured for.
-
-The goal of this patch is to make steps towards removing the bootloader
-dependency for SGMII PCS pre-configuration, as well as to add support
-for monitoring the in-band SGMII AN between the PCS and the system-side
-link partner (PHY or other MAC).
-
-In practice the bootloader dependency is not completely removed. U-Boot
-pre-programs the PHY address at which each PCS can be found on the
-internal MDIO bus (MDEV_PORT). This is needed because the PCS of each
-port has the same out-of-reset PHY address of zero. The SerDes register
-for changing MDEV_PORT is pretty deep in the SoC (outside the addresses
-of the ENETC PCI BARs) and therefore inaccessible to us from here.
-
-Felix VSC9959 and Ocelot VSC7514 are integrated very differently in
-their respective SoCs, and for that reason Felix does not use the Ocelot
-core library for PHYLINK. On one hand we don't want to impose the
-fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't
-need to force the MAC link speed the way Ocelot does, since the MAC is
-connected to the PCS through a fixed GMII, and the PCS is the one who
-does the rate adaptation at lower link speeds, which the MAC does not
-even need to know about. In fact changing the GMII speed for Felix
-irrecoverably breaks transmission through that port until a reset.
-
-The pair with ENETC port 3 and Felix port 5 is optional and doesn't
-support tagging. When we enable it, swp5 is a regular slave port, albeit
-an internal one. The trouble is that it doesn't work, and that is
-because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave
-ports. So that is yet another reason for wanting to convert Felix to the
-native PHYLINK API.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-
-Conflicts:
-	drivers/net/dsa/ocelot/felix.c
-
-with the upstream API change for of_get_phy_mode() introduced in
-0c65b2b90d13 ("net: of_get_phy_mode: Change API to solve int/unit
-warnings") and merged in v5.4-rc5.
----
- drivers/net/dsa/ocelot/Kconfig         |   2 +
- drivers/net/dsa/ocelot/felix.c         | 267 +++++++++++++++++-
- drivers/net/dsa/ocelot/felix.h         |  16 +-
- drivers/net/dsa/ocelot/felix_vsc9959.c | 501 ++++++++++++++++++++++++++++++++-
- 4 files changed, 769 insertions(+), 17 deletions(-)
-
---- a/drivers/net/dsa/ocelot/Kconfig
-+++ b/drivers/net/dsa/ocelot/Kconfig
-@@ -3,8 +3,10 @@ config NET_DSA_MSCC_FELIX
- 	tristate "Ocelot / Felix Ethernet switch support"
- 	depends on NET_DSA && PCI
- 	depends on NET_VENDOR_MICROSEMI
-+	depends on NET_VENDOR_FREESCALE
- 	select MSCC_OCELOT_SWITCH
- 	select NET_DSA_TAG_OCELOT
-+	select FSL_ENETC_MDIO
- 	help
- 	  This driver supports the VSC9959 network switch, which is a member of
- 	  the Vitesse / Microsemi / Microchip Ocelot family of switching cores.
---- a/drivers/net/dsa/ocelot/felix.c
-+++ b/drivers/net/dsa/ocelot/felix.c
-@@ -2,9 +2,14 @@
- /* Copyright 2019 NXP Semiconductors
-  */
- #include <uapi/linux/if_bridge.h>
-+#include <soc/mscc/ocelot_qsys.h>
-+#include <soc/mscc/ocelot_sys.h>
-+#include <soc/mscc/ocelot_dev.h>
-+#include <soc/mscc/ocelot_ana.h>
- #include <soc/mscc/ocelot.h>
- #include <linux/packing.h>
- #include <linux/module.h>
-+#include <linux/of_net.h>
- #include <linux/pci.h>
- #include <linux/of.h>
- #include <net/dsa.h>
-@@ -58,14 +63,6 @@ static int felix_set_ageing_time(struct
- 	return 0;
- }
- 
--static void felix_adjust_link(struct dsa_switch *ds, int port,
--			      struct phy_device *phydev)
--{
--	struct ocelot *ocelot = ds->priv;
--
--	ocelot_adjust_link(ocelot, port, phydev);
--}
--
- static int felix_fdb_dump(struct dsa_switch *ds, int port,
- 			  dsa_fdb_dump_cb_t *cb, void *data)
- {
-@@ -202,6 +199,138 @@ static void felix_port_disable(struct ds
- 	return ocelot_port_disable(ocelot, port);
- }
- 
-+static void felix_phylink_validate(struct dsa_switch *ds, int port,
-+				   unsigned long *supported,
-+				   struct phylink_link_state *state)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-+
-+	if (state->interface != PHY_INTERFACE_MODE_NA &&
-+	    state->interface != ocelot_port->phy_mode) {
-+		bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-+		return;
-+	}
-+
-+	/* No half-duplex. */
-+	phylink_set_port_modes(mask);
-+	phylink_set(mask, Autoneg);
-+	phylink_set(mask, Pause);
-+	phylink_set(mask, Asym_Pause);
-+	if (state->interface != PHY_INTERFACE_MODE_2500BASEX) {
-+		phylink_set(mask, 10baseT_Full);
-+		phylink_set(mask, 100baseT_Full);
-+		phylink_set(mask, 1000baseT_Full);
-+	}
-+	/* The internal ports that run at 2.5G are overclocked GMII */
-+	if (state->interface == PHY_INTERFACE_MODE_GMII ||
-+	    state->interface == PHY_INTERFACE_MODE_2500BASEX ||
-+	    state->interface == PHY_INTERFACE_MODE_USXGMII) {
-+		phylink_set(mask, 2500baseT_Full);
-+		phylink_set(mask, 2500baseX_Full);
-+	}
-+
-+	bitmap_and(supported, supported, mask,
-+		   __ETHTOOL_LINK_MODE_MASK_NBITS);
-+	bitmap_and(state->advertising, state->advertising, mask,
-+		   __ETHTOOL_LINK_MODE_MASK_NBITS);
-+}
-+
-+static int felix_phylink_mac_pcs_get_state(struct dsa_switch *ds, int port,
-+					   struct phylink_link_state *state)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+	struct felix *felix = ocelot_to_felix(ocelot);
-+
-+	if (felix->info->pcs_link_state)
-+		felix->info->pcs_link_state(ocelot, port, state);
-+
-+	return 0;
-+}
-+
-+static void felix_phylink_mac_config(struct dsa_switch *ds, int port,
-+				     unsigned int link_an_mode,
-+				     const struct phylink_link_state *state)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+	struct felix *felix = ocelot_to_felix(ocelot);
-+	u32 mac_fc_cfg;
-+
-+	/* Take port out of reset by clearing the MAC_TX_RST, MAC_RX_RST and
-+	 * PORT_RST bits in CLOCK_CFG
-+	 */
-+	ocelot_port_writel(ocelot_port, DEV_CLOCK_CFG_LINK_SPEED(state->speed),
-+			   DEV_CLOCK_CFG);
-+
-+	/* Flow control. Link speed is only used here to evaluate the time
-+	 * specification in incoming pause frames.
-+	 */
-+	mac_fc_cfg = SYS_MAC_FC_CFG_FC_LINK_SPEED(state->speed);
-+	if (state->pause & MLO_PAUSE_RX)
-+		mac_fc_cfg |= SYS_MAC_FC_CFG_RX_FC_ENA;
-+	if (state->pause & MLO_PAUSE_TX)
-+		mac_fc_cfg |= SYS_MAC_FC_CFG_TX_FC_ENA |
-+			      SYS_MAC_FC_CFG_PAUSE_VAL_CFG(0xffff) |
-+			      SYS_MAC_FC_CFG_FC_LATENCY_CFG(0x7) |
-+			      SYS_MAC_FC_CFG_ZERO_PAUSE_ENA;
-+	ocelot_write_rix(ocelot, mac_fc_cfg, SYS_MAC_FC_CFG, port);
-+
-+	ocelot_write_rix(ocelot, 0, ANA_POL_FLOWC, port);
-+
-+	if (felix->info->pcs_init)
-+		felix->info->pcs_init(ocelot, port, link_an_mode, state);
-+}
-+
-+static void felix_phylink_mac_an_restart(struct dsa_switch *ds, int port)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+	struct felix *felix = ocelot_to_felix(ocelot);
-+
-+	if (felix->info->pcs_an_restart)
-+		felix->info->pcs_an_restart(ocelot, port);
-+}
-+
-+static void felix_phylink_mac_link_down(struct dsa_switch *ds, int port,
-+					unsigned int link_an_mode,
-+					phy_interface_t interface)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+
-+	ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG);
-+	ocelot_rmw_rix(ocelot, 0, QSYS_SWITCH_PORT_MODE_PORT_ENA,
-+		       QSYS_SWITCH_PORT_MODE, port);
-+}
-+
-+static void felix_phylink_mac_link_up(struct dsa_switch *ds, int port,
-+				      unsigned int link_an_mode,
-+				      phy_interface_t interface,
-+				      struct phy_device *phydev)
-+{
-+	struct ocelot *ocelot = ds->priv;
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+
-+	/* Enable MAC module */
-+	ocelot_port_writel(ocelot_port, DEV_MAC_ENA_CFG_RX_ENA |
-+			   DEV_MAC_ENA_CFG_TX_ENA, DEV_MAC_ENA_CFG);
-+
-+	/* Enable receiving frames on the port, and activate auto-learning of
-+	 * MAC addresses.
-+	 */
-+	ocelot_write_gix(ocelot, ANA_PORT_PORT_CFG_LEARNAUTO |
-+			 ANA_PORT_PORT_CFG_RECV_ENA |
-+			 ANA_PORT_PORT_CFG_PORTID_VAL(port),
-+			 ANA_PORT_PORT_CFG, port);
-+
-+	/* Core: Enable port for frame transfer */
-+	ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
-+			 QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
-+			 QSYS_SWITCH_PORT_MODE_PORT_ENA,
-+			 QSYS_SWITCH_PORT_MODE, port);
-+}
-+
- static void felix_get_strings(struct dsa_switch *ds, int port,
- 			      u32 stringset, u8 *data)
- {
-@@ -232,10 +361,78 @@ static int felix_get_ts_info(struct dsa_
- 	return ocelot_get_ts_info(ocelot, port, info);
- }
- 
-+static int felix_parse_ports_node(struct felix *felix,
-+				  struct device_node *ports_node,
-+				  phy_interface_t *port_phy_modes)
-+{
-+	struct ocelot *ocelot = &felix->ocelot;
-+	struct device *dev = felix->ocelot.dev;
-+	struct device_node *child;
-+
-+	for_each_child_of_node(ports_node, child) {
-+		phy_interface_t phy_mode;
-+		u32 port;
-+		int err;
-+
-+		/* Get switch port number from DT */
-+		if (of_property_read_u32(child, "reg", &port) < 0) {
-+			dev_err(dev, "Port number not defined in device tree "
-+				"(property \"reg\")\n");
-+			of_node_put(child);
-+			return -ENODEV;
-+		}
-+
-+		/* Get PHY mode from DT */
-+		err = of_get_phy_mode(child);
-+		if (err < 0) {
-+			dev_err(dev, "Failed to read phy-mode or "
-+				"phy-interface-type property for port %d\n",
-+				port);
-+			of_node_put(child);
-+			return -ENODEV;
-+		}
-+
-+		phy_mode = err;
-+
-+		err = felix->info->prevalidate_phy_mode(ocelot, port, phy_mode);
-+		if (err < 0) {
-+			dev_err(dev, "Unsupported PHY mode %s on port %d\n",
-+				phy_modes(phy_mode), port);
-+			return err;
-+		}
-+
-+		port_phy_modes[port] = phy_mode;
-+	}
-+
-+	return 0;
-+}
-+
-+static int felix_parse_dt(struct felix *felix, phy_interface_t *port_phy_modes)
-+{
-+	struct device *dev = felix->ocelot.dev;
-+	struct device_node *switch_node;
-+	struct device_node *ports_node;
-+	int err;
-+
-+	switch_node = dev->of_node;
-+
-+	ports_node = of_get_child_by_name(switch_node, "ports");
-+	if (!ports_node) {
-+		dev_err(dev, "Incorrect bindings: absent \"ports\" node\n");
-+		return -ENODEV;
-+	}
-+
-+	err = felix_parse_ports_node(felix, ports_node, port_phy_modes);
-+	of_node_put(ports_node);
-+
-+	return err;
-+}
-+
- static int felix_init_structs(struct felix *felix, int num_phys_ports)
- {
- 	struct ocelot *ocelot = &felix->ocelot;
--	resource_size_t base;
-+	phy_interface_t *port_phy_modes;
-+	resource_size_t switch_base;
- 	int port, i, err;
- 
- 	ocelot->num_phys_ports = num_phys_ports;
-@@ -250,7 +447,19 @@ static int felix_init_structs(struct fel
- 	ocelot->shared_queue_sz	= felix->info->shared_queue_sz;
- 	ocelot->ops		= felix->info->ops;
- 
--	base = pci_resource_start(felix->pdev, felix->info->pci_bar);
-+	port_phy_modes = kcalloc(num_phys_ports, sizeof(phy_interface_t),
-+				 GFP_KERNEL);
-+	if (!port_phy_modes)
-+		return -ENOMEM;
-+
-+	err = felix_parse_dt(felix, port_phy_modes);
-+	if (err) {
-+		kfree(port_phy_modes);
-+		return err;
-+	}
-+
-+	switch_base = pci_resource_start(felix->pdev,
-+					 felix->info->switch_pci_bar);
- 
- 	for (i = 0; i < TARGET_MAX; i++) {
- 		struct regmap *target;
-@@ -261,13 +470,14 @@ static int felix_init_structs(struct fel
- 
- 		res = &felix->info->target_io_res[i];
- 		res->flags = IORESOURCE_MEM;
--		res->start += base;
--		res->end += base;
-+		res->start += switch_base;
-+		res->end += switch_base;
- 
- 		target = ocelot_regmap_init(ocelot, res);
- 		if (IS_ERR(target)) {
- 			dev_err(ocelot->dev,
- 				"Failed to map device memory space\n");
-+			kfree(port_phy_modes);
- 			return PTR_ERR(target);
- 		}
- 
-@@ -277,6 +487,7 @@ static int felix_init_structs(struct fel
- 	err = ocelot_regfields_init(ocelot, felix->info->regfields);
- 	if (err) {
- 		dev_err(ocelot->dev, "failed to init reg fields map\n");
-+		kfree(port_phy_modes);
- 		return err;
- 	}
- 
-@@ -291,26 +502,37 @@ static int felix_init_structs(struct fel
- 		if (!ocelot_port) {
- 			dev_err(ocelot->dev,
- 				"failed to allocate port memory\n");
-+			kfree(port_phy_modes);
- 			return -ENOMEM;
- 		}
- 
- 		res = &felix->info->port_io_res[port];
- 		res->flags = IORESOURCE_MEM;
--		res->start += base;
--		res->end += base;
-+		res->start += switch_base;
-+		res->end += switch_base;
- 
- 		port_regs = devm_ioremap_resource(ocelot->dev, res);
- 		if (IS_ERR(port_regs)) {
- 			dev_err(ocelot->dev,
- 				"failed to map registers for port %d\n", port);
-+			kfree(port_phy_modes);
- 			return PTR_ERR(port_regs);
- 		}
- 
-+		ocelot_port->phy_mode = port_phy_modes[port];
- 		ocelot_port->ocelot = ocelot;
- 		ocelot_port->regs = port_regs;
- 		ocelot->ports[port] = ocelot_port;
- 	}
- 
-+	kfree(port_phy_modes);
-+
-+	if (felix->info->mdio_bus_alloc) {
-+		err = felix->info->mdio_bus_alloc(ocelot);
-+		if (err < 0)
-+			return err;
-+	}
-+
- 	return 0;
- }
- 
-@@ -340,12 +562,22 @@ static int felix_setup(struct dsa_switch
- 					    OCELOT_TAG_PREFIX_LONG);
- 	}
- 
-+	/* It looks like the MAC/PCS interrupt register - PM0_IEVENT (0x8040)
-+	 * isn't instantiated for the Felix PF.
-+	 * In-band AN may take a few ms to complete, so we need to poll.
-+	 */
-+	ds->pcs_poll = true;
-+
- 	return 0;
- }
- 
- static void felix_teardown(struct dsa_switch *ds)
- {
- 	struct ocelot *ocelot = ds->priv;
-+	struct felix *felix = ocelot_to_felix(ocelot);
-+
-+	if (felix->info->mdio_bus_free)
-+		felix->info->mdio_bus_free(ocelot);
- 
- 	/* stop workqueue thread */
- 	ocelot_deinit(ocelot);
-@@ -416,7 +648,12 @@ static const struct dsa_switch_ops felix
- 	.get_ethtool_stats	= felix_get_ethtool_stats,
- 	.get_sset_count		= felix_get_sset_count,
- 	.get_ts_info		= felix_get_ts_info,
--	.adjust_link		= felix_adjust_link,
-+	.phylink_validate	= felix_phylink_validate,
-+	.phylink_mac_link_state	= felix_phylink_mac_pcs_get_state,
-+	.phylink_mac_config	= felix_phylink_mac_config,
-+	.phylink_mac_an_restart	= felix_phylink_mac_an_restart,
-+	.phylink_mac_link_down	= felix_phylink_mac_link_down,
-+	.phylink_mac_link_up	= felix_phylink_mac_link_up,
- 	.port_enable		= felix_port_enable,
- 	.port_disable		= felix_port_disable,
- 	.port_fdb_dump		= felix_fdb_dump,
---- a/drivers/net/dsa/ocelot/felix.h
-+++ b/drivers/net/dsa/ocelot/felix.h
-@@ -10,6 +10,7 @@
- struct felix_info {
- 	struct resource			*target_io_res;
- 	struct resource			*port_io_res;
-+	struct resource			*imdio_res;
- 	const struct reg_field		*regfields;
- 	const u32 *const		*map;
- 	const struct ocelot_ops		*ops;
-@@ -17,7 +18,18 @@ struct felix_info {
- 	const struct ocelot_stat_layout	*stats_layout;
- 	unsigned int			num_stats;
- 	int				num_ports;
--	int				pci_bar;
-+	int				switch_pci_bar;
-+	int				imdio_pci_bar;
-+	int	(*mdio_bus_alloc)(struct ocelot *ocelot);
-+	void	(*mdio_bus_free)(struct ocelot *ocelot);
-+	void	(*pcs_init)(struct ocelot *ocelot, int port,
-+			    unsigned int link_an_mode,
-+			    const struct phylink_link_state *state);
-+	void	(*pcs_an_restart)(struct ocelot *ocelot, int port);
-+	void	(*pcs_link_state)(struct ocelot *ocelot, int port,
-+				  struct phylink_link_state *state);
-+	int	(*prevalidate_phy_mode)(struct ocelot *ocelot, int port,
-+					phy_interface_t phy_mode);
- };
- 
- extern struct felix_info		felix_info_vsc9959;
-@@ -32,6 +44,8 @@ struct felix {
- 	struct pci_dev			*pdev;
- 	struct felix_info		*info;
- 	struct ocelot			ocelot;
-+	struct mii_bus			*imdio;
-+	struct phy_device		**pcs;
- };
- 
- #endif
---- a/drivers/net/dsa/ocelot/felix_vsc9959.c
-+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
-@@ -2,12 +2,33 @@
- /* Copyright 2017 Microsemi Corporation
-  * Copyright 2018-2019 NXP Semiconductors
-  */
-+#include <linux/fsl/enetc_mdio.h>
- #include <soc/mscc/ocelot_sys.h>
- #include <soc/mscc/ocelot.h>
- #include <linux/iopoll.h>
- #include <linux/pci.h>
- #include "felix.h"
- 
-+/* TODO: should find a better place for these */
-+#define USXGMII_BMCR_RESET		BIT(15)
-+#define USXGMII_BMCR_AN_EN		BIT(12)
-+#define USXGMII_BMCR_RST_AN		BIT(9)
-+#define USXGMII_BMSR_LNKS(status)	(((status) & GENMASK(2, 2)) >> 2)
-+#define USXGMII_BMSR_AN_CMPL(status)	(((status) & GENMASK(5, 5)) >> 5)
-+#define USXGMII_ADVERTISE_LNKS(x)	(((x) << 15) & BIT(15))
-+#define USXGMII_ADVERTISE_FDX		BIT(12)
-+#define USXGMII_ADVERTISE_SPEED(x)	(((x) << 9) & GENMASK(11, 9))
-+#define USXGMII_LPA_LNKS(lpa)		((lpa) >> 15)
-+#define USXGMII_LPA_DUPLEX(lpa)		(((lpa) & GENMASK(12, 12)) >> 12)
-+#define USXGMII_LPA_SPEED(lpa)		(((lpa) & GENMASK(11, 9)) >> 9)
-+
-+enum usxgmii_speed {
-+	USXGMII_SPEED_10	= 0,
-+	USXGMII_SPEED_100	= 1,
-+	USXGMII_SPEED_1000	= 2,
-+	USXGMII_SPEED_2500	= 4,
-+};
-+
- static const u32 vsc9959_ana_regmap[] = {
- 	REG(ANA_ADVLEARN,			0x0089a0),
- 	REG(ANA_VLANMASK,			0x0089a4),
-@@ -390,6 +411,15 @@ static struct resource vsc9959_port_io_r
- 	},
- };
- 
-+/* Port MAC 0 Internal MDIO bus through which the SerDes acting as an
-+ * SGMII/QSGMII MAC PCS can be found.
-+ */
-+static struct resource vsc9959_imdio_res = {
-+	.start		= 0x8030,
-+	.end		= 0x8040,
-+	.name		= "imdio",
-+};
-+
- static const struct reg_field vsc9959_regfields[] = {
- 	[ANA_ADVLEARN_VLAN_CHK] = REG_FIELD(ANA_ADVLEARN, 6, 6),
- 	[ANA_ADVLEARN_LEARN_MIRROR] = REG_FIELD(ANA_ADVLEARN, 0, 5),
-@@ -569,13 +599,475 @@ static int vsc9959_reset(struct ocelot *
- 	return 0;
- }
- 
-+static void vsc9959_pcs_an_restart_sgmii(struct phy_device *pcs)
-+{
-+	phy_set_bits(pcs, MII_BMCR, BMCR_ANRESTART);
-+}
-+
-+static void vsc9959_pcs_an_restart_usxgmii(struct phy_device *pcs)
-+{
-+	phy_write_mmd(pcs, MDIO_MMD_VEND2, MII_BMCR,
-+		      USXGMII_BMCR_RESET |
-+		      USXGMII_BMCR_AN_EN |
-+		      USXGMII_BMCR_RST_AN);
-+}
-+
-+static void vsc9959_pcs_an_restart(struct ocelot *ocelot, int port)
-+{
-+	struct felix *felix = ocelot_to_felix(ocelot);
-+	struct phy_device *pcs = felix->pcs[port];
-+
-+	if (!pcs)
-+		return;
-+
-+	switch (pcs->interface) {
-+	case PHY_INTERFACE_MODE_SGMII:
-+	case PHY_INTERFACE_MODE_QSGMII:
-+		vsc9959_pcs_an_restart_sgmii(pcs);
-+		break;
-+	case PHY_INTERFACE_MODE_USXGMII:
-+		vsc9959_pcs_an_restart_usxgmii(pcs);
-+		break;
-+	default:
-+		dev_err(ocelot->dev, "Invalid PCS interface type %s\n",
-+			phy_modes(pcs->interface));
-+		break;
-+	}
-+}
-+
-+/* We enable SGMII AN only when the PHY has managed = "in-band-status" in the
-+ * device tree. If we are in MLO_AN_PHY mode, we program directly state->speed
-+ * into the PCS, which is retrieved out-of-band over MDIO. This also has the
-+ * benefit of working with SGMII fixed-links, like downstream switches, where
-+ * both link partners attempt to operate as AN slaves and therefore AN never
-+ * completes.  But it also has the disadvantage that some PHY chips don't pass
-+ * traffic if SGMII AN is enabled but not completed (acknowledged by us), so
-+ * setting MLO_AN_INBAND is actually required for those.
-+ */
-+static void vsc9959_pcs_init_sgmii(struct phy_device *pcs,
-+				   unsigned int link_an_mode,
-+				   const struct phylink_link_state *state)
-+{
-+	if (link_an_mode == MLO_AN_INBAND) {
-+		/* SGMII spec requires tx_config_Reg[15:0] to be exactly 0x4001
-+		 * for the MAC PCS in order to acknowledge the AN.
-+		 */
-+		phy_write(pcs, MII_ADVERTISE, ADVERTISE_SGMII |
-+					      ADVERTISE_LPACK);
-+
-+		phy_write(pcs, ENETC_PCS_IF_MODE,
-+			  ENETC_PCS_IF_MODE_SGMII_EN |
-+			  ENETC_PCS_IF_MODE_USE_SGMII_AN);
-+
-+		/* Adjust link timer for SGMII */
-+		phy_write(pcs, ENETC_PCS_LINK_TIMER1,
-+			  ENETC_PCS_LINK_TIMER1_VAL);
-+		phy_write(pcs, ENETC_PCS_LINK_TIMER2,
-+			  ENETC_PCS_LINK_TIMER2_VAL);
-+
-+		phy_write(pcs, MII_BMCR, BMCR_ANRESTART | BMCR_ANENABLE);
-+	} else {
-+		int speed;
-+
-+		if (state->duplex == DUPLEX_HALF) {
-+			phydev_err(pcs, "Half duplex not supported\n");
-+			return;
-+		}
-+		switch (state->speed) {
-+		case SPEED_1000:
-+			speed = ENETC_PCS_SPEED_1000;
-+			break;
-+		case SPEED_100:
-+			speed = ENETC_PCS_SPEED_100;
-+			break;
-+		case SPEED_10:
-+			speed = ENETC_PCS_SPEED_10;
-+			break;
-+		case SPEED_UNKNOWN:
-+			/* Silently don't do anything */
-+			return;
-+		default:
-+			phydev_err(pcs, "Invalid PCS speed %d\n", state->speed);
-+			return;
-+		}
-+
-+		phy_write(pcs, ENETC_PCS_IF_MODE,
-+			  ENETC_PCS_IF_MODE_SGMII_EN |
-+			  ENETC_PCS_IF_MODE_SGMII_SPEED(speed));
-+
-+		/* Yes, not a mistake: speed is given by IF_MODE. */
-+		phy_write(pcs, MII_BMCR, BMCR_RESET |
-+					 BMCR_SPEED1000 |
-+					 BMCR_FULLDPLX);
-+	}
-+}
-+
-+/* 2500Base-X is SerDes protocol 7 on Felix and 6 on ENETC. It is a SerDes lane
-+ * clocked at 3.125 GHz which encodes symbols with 8b/10b and does not have
-+ * auto-negotiation of any link parameters. Electrically it is compatible with
-+ * a single lane of XAUI.
-+ * The hardware reference manual wants to call this mode SGMII, but it isn't
-+ * really, since the fundamental features of SGMII:
-+ * - Downgrading the link speed by duplicating symbols
-+ * - Auto-negotiation
-+ * are not there.
-+ * The speed is configured at 1000 in the IF_MODE and BMCR MDIO registers
-+ * because the clock frequency is actually given by a PLL configured in the
-+ * Reset Configuration Word (RCW).
-+ * Since there is no difference between fixed speed SGMII w/o AN and 802.3z w/o
-+ * AN, we call this PHY interface type 2500Base-X. In case a PHY negotiates a
-+ * lower link speed on line side, the system-side interface remains fixed at
-+ * 2500 Mbps and we do rate adaptation through pause frames.
-+ */
-+static void vsc9959_pcs_init_2500basex(struct phy_device *pcs,
-+				       unsigned int link_an_mode,
-+				       const struct phylink_link_state *state)
-+{
-+	if (link_an_mode == MLO_AN_INBAND) {
-+		phydev_err(pcs, "AN not supported on 3.125GHz SerDes lane\n");
-+		return;
-+	}
-+
-+	phy_write(pcs, ENETC_PCS_IF_MODE,
-+		  ENETC_PCS_IF_MODE_SGMII_EN |
-+		  ENETC_PCS_IF_MODE_SGMII_SPEED(ENETC_PCS_SPEED_2500));
-+
-+	phy_write(pcs, MII_BMCR, BMCR_SPEED1000 |
-+				 BMCR_FULLDPLX |
-+				 BMCR_RESET);
-+}
-+
-+static void vsc9959_pcs_init_usxgmii(struct phy_device *pcs,
-+				     unsigned int link_an_mode,
-+				     const struct phylink_link_state *state)
-+{
-+	if (link_an_mode != MLO_AN_INBAND) {
-+		phydev_err(pcs, "USXGMII only supports in-band AN for now\n");
-+		return;
-+	}
-+
-+	/* Configure device ability for the USXGMII Replicator */
-+	phy_write_mmd(pcs, MDIO_MMD_VEND2, MII_ADVERTISE,
-+		      USXGMII_ADVERTISE_SPEED(USXGMII_SPEED_2500) |
-+		      USXGMII_ADVERTISE_LNKS(1) |
-+		      ADVERTISE_SGMII |
-+		      ADVERTISE_LPACK |
-+		      USXGMII_ADVERTISE_FDX);
-+}
-+
-+static void vsc9959_pcs_init(struct ocelot *ocelot, int port,
-+			     unsigned int link_an_mode,
-+			     const struct phylink_link_state *state)
-+{
-+	struct felix *felix = ocelot_to_felix(ocelot);
-+	struct phy_device *pcs = felix->pcs[port];
-+
-+	if (!pcs)
-+		return;
-+
-+	/* The PCS does not implement the BMSR register fully, so capability
-+	 * detection via genphy_read_abilities does not work. Since we can get
-+	 * the PHY config word from the LPA register though, there is still
-+	 * value in using the generic phy_resolve_aneg_linkmode function. So
-+	 * populate the supported and advertising link modes manually here.
-+	 */
-+	linkmode_set_bit_array(phy_basic_ports_array,
-+			       ARRAY_SIZE(phy_basic_ports_array),
-+			       pcs->supported);
-+	linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, pcs->supported);
-+	linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, pcs->supported);
-+	linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, pcs->supported);
-+	if (pcs->interface == PHY_INTERFACE_MODE_2500BASEX ||
-+	    pcs->interface == PHY_INTERFACE_MODE_USXGMII)
-+		linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseX_Full_BIT,
-+				 pcs->supported);
-+	if (pcs->interface != PHY_INTERFACE_MODE_2500BASEX)
-+		linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-+				 pcs->supported);
-+	phy_advertise_supported(pcs);
-+
-+	switch (pcs->interface) {
-+	case PHY_INTERFACE_MODE_SGMII:
-+	case PHY_INTERFACE_MODE_QSGMII:
-+		vsc9959_pcs_init_sgmii(pcs, link_an_mode, state);
-+		break;
-+	case PHY_INTERFACE_MODE_2500BASEX:
-+		vsc9959_pcs_init_2500basex(pcs, link_an_mode, state);
-+		break;
-+	case PHY_INTERFACE_MODE_USXGMII:
-+		vsc9959_pcs_init_usxgmii(pcs, link_an_mode, state);
-+		break;
-+	default:
-+		dev_err(ocelot->dev, "Unsupported link mode %s\n",
-+			phy_modes(pcs->interface));
-+	}
-+}
-+
-+static void vsc9959_pcs_link_state_resolve(struct phy_device *pcs,
-+					   struct phylink_link_state *state)
-+{
-+	state->an_complete = pcs->autoneg_complete;
-+	state->an_enabled = pcs->autoneg;
-+	state->link = pcs->link;
-+	state->duplex = pcs->duplex;
-+	state->speed = pcs->speed;
-+	/* SGMII AN does not negotiate flow control, but that's ok,
-+	 * since phylink already knows that, and does:
-+	 *	link_state.pause |= pl->phy_state.pause;
-+	 */
-+	state->pause = MLO_PAUSE_NONE;
-+
-+	phydev_dbg(pcs,
-+		   "mode=%s/%s/%s adv=%*pb lpa=%*pb link=%u an_enabled=%u an_complete=%u\n",
-+		   phy_modes(pcs->interface),
-+		   phy_speed_to_str(pcs->speed),
-+		   phy_duplex_to_str(pcs->duplex),
-+		   __ETHTOOL_LINK_MODE_MASK_NBITS, pcs->advertising,
-+		   __ETHTOOL_LINK_MODE_MASK_NBITS, pcs->lp_advertising,
-+		   pcs->link, pcs->autoneg, pcs->autoneg_complete);
-+}
-+
-+static void vsc9959_pcs_link_state_sgmii(struct phy_device *pcs,
-+					 struct phylink_link_state *state)
-+{
-+	int err;
-+
-+	err = genphy_update_link(pcs);
-+	if (err < 0)
-+		return;
-+
-+	if (pcs->autoneg_complete) {
-+		u16 lpa = phy_read(pcs, MII_LPA);
-+
-+		mii_lpa_to_linkmode_lpa_sgmii(pcs->lp_advertising, lpa);
-+
-+		phy_resolve_aneg_linkmode(pcs);
-+	}
-+}
-+
-+static void vsc9959_pcs_link_state_2500basex(struct phy_device *pcs,
-+					     struct phylink_link_state *state)
-+{
-+	int err;
-+
-+	err = genphy_update_link(pcs);
-+	if (err < 0)
-+		return;
-+
-+	pcs->speed = SPEED_2500;
-+	pcs->asym_pause = true;
-+	pcs->pause = true;
-+}
-+
-+static void vsc9959_pcs_link_state_usxgmii(struct phy_device *pcs,
-+					   struct phylink_link_state *state)
-+{
-+	int status, lpa;
-+
-+	status = phy_read_mmd(pcs, MDIO_MMD_VEND2, MII_BMSR);
-+	if (status < 0)
-+		return;
-+
-+	pcs->autoneg = true;
-+	pcs->autoneg_complete = USXGMII_BMSR_AN_CMPL(status);
-+	pcs->link = USXGMII_BMSR_LNKS(status);
-+
-+	if (!pcs->link || !pcs->autoneg_complete)
-+		return;
-+
-+	lpa = phy_read_mmd(pcs, MDIO_MMD_VEND2, MII_LPA);
-+	if (lpa < 0)
-+		return;
-+
-+	switch (USXGMII_LPA_SPEED(lpa)) {
-+	case USXGMII_SPEED_10:
-+		pcs->speed = SPEED_10;
-+		break;
-+	case USXGMII_SPEED_100:
-+		pcs->speed = SPEED_100;
-+		break;
-+	case USXGMII_SPEED_1000:
-+		pcs->speed = SPEED_1000;
-+		break;
-+	case USXGMII_SPEED_2500:
-+		pcs->speed = SPEED_2500;
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	pcs->link = USXGMII_LPA_LNKS(lpa);
-+	if (USXGMII_LPA_DUPLEX(lpa))
-+		pcs->duplex = DUPLEX_FULL;
-+	else
-+		pcs->duplex = DUPLEX_HALF;
-+}
-+
-+static void vsc9959_pcs_link_state(struct ocelot *ocelot, int port,
-+				   struct phylink_link_state *state)
-+{
-+	struct felix *felix = ocelot_to_felix(ocelot);
-+	struct phy_device *pcs = felix->pcs[port];
-+
-+	if (!pcs)
-+		return;
-+
-+	pcs->speed = SPEED_UNKNOWN;
-+	pcs->duplex = DUPLEX_UNKNOWN;
-+	pcs->pause = 0;
-+	pcs->asym_pause = 0;
-+
-+	switch (pcs->interface) {
-+	case PHY_INTERFACE_MODE_SGMII:
-+	case PHY_INTERFACE_MODE_QSGMII:
-+		vsc9959_pcs_link_state_sgmii(pcs, state);
-+		break;
-+	case PHY_INTERFACE_MODE_2500BASEX:
-+		vsc9959_pcs_link_state_2500basex(pcs, state);
-+		break;
-+	case PHY_INTERFACE_MODE_USXGMII:
-+		vsc9959_pcs_link_state_usxgmii(pcs, state);
-+		break;
-+	default:
-+		return;
-+	}
-+
-+	vsc9959_pcs_link_state_resolve(pcs, state);
-+}
-+
-+static int vsc9959_prevalidate_phy_mode(struct ocelot *ocelot, int port,
-+					phy_interface_t phy_mode)
-+{
-+	switch (phy_mode) {
-+	case PHY_INTERFACE_MODE_GMII:
-+		/* Only supported on internal to-CPU ports */
-+		if (port != 4 && port != 5)
-+			return -ENOTSUPP;
-+		return 0;
-+	case PHY_INTERFACE_MODE_SGMII:
-+	case PHY_INTERFACE_MODE_QSGMII:
-+	case PHY_INTERFACE_MODE_USXGMII:
-+	case PHY_INTERFACE_MODE_2500BASEX:
-+		/* Not supported on internal to-CPU ports */
-+		if (port == 4 || port == 5)
-+			return -ENOTSUPP;
-+		return 0;
-+	default:
-+		return -ENOTSUPP;
-+	}
-+}
-+
- static const struct ocelot_ops vsc9959_ops = {
- 	.reset			= vsc9959_reset,
- };
- 
-+static int vsc9959_mdio_bus_alloc(struct ocelot *ocelot)
-+{
-+	struct felix *felix = ocelot_to_felix(ocelot);
-+	struct enetc_mdio_priv *mdio_priv;
-+	struct device *dev = ocelot->dev;
-+	resource_size_t imdio_base;
-+	void __iomem *imdio_regs;
-+	struct resource *res;
-+	struct enetc_hw *hw;
-+	struct mii_bus *bus;
-+	int port;
-+	int rc;
-+
-+	felix->pcs = devm_kcalloc(dev, felix->info->num_ports,
-+				  sizeof(struct phy_device *),
-+				  GFP_KERNEL);
-+	if (!felix->pcs) {
-+		dev_err(dev, "failed to allocate array for PCS PHYs\n");
-+		return -ENOMEM;
-+	}
-+
-+	imdio_base = pci_resource_start(felix->pdev,
-+					felix->info->imdio_pci_bar);
-+
-+	res = felix->info->imdio_res;
-+	res->flags = IORESOURCE_MEM;
-+	res->start += imdio_base;
-+	res->end += imdio_base;
-+
-+	imdio_regs = devm_ioremap_resource(dev, res);
-+	if (IS_ERR(imdio_regs)) {
-+		dev_err(dev, "failed to map internal MDIO registers\n");
-+		return PTR_ERR(imdio_regs);
-+	}
-+
-+	hw = enetc_hw_alloc(dev, imdio_regs);
-+	if (IS_ERR(hw)) {
-+		dev_err(dev, "failed to allocate ENETC HW structure\n");
-+		return PTR_ERR(hw);
-+	}
-+
-+	bus = devm_mdiobus_alloc_size(dev, sizeof(*mdio_priv));
-+	if (!bus)
-+		return -ENOMEM;
-+
-+	bus->name = "VSC9959 internal MDIO bus";
-+	bus->read = enetc_mdio_read;
-+	bus->write = enetc_mdio_write;
-+	bus->parent = dev;
-+	mdio_priv = bus->priv;
-+	mdio_priv->hw = hw;
-+	/* This gets added to imdio_regs, which already maps addresses
-+	 * starting with the proper offset.
-+	 */
-+	mdio_priv->mdio_base = 0;
-+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-imdio", dev_name(dev));
-+
-+	/* Needed in order to initialize the bus mutex lock */
-+	rc = mdiobus_register(bus);
-+	if (rc < 0) {
-+		dev_err(dev, "failed to register MDIO bus\n");
-+		return rc;
-+	}
-+
-+	felix->imdio = bus;
-+
-+	for (port = 0; port < felix->info->num_ports; port++) {
-+		struct ocelot_port *ocelot_port = ocelot->ports[port];
-+		struct phy_device *pcs;
-+		bool is_c45 = false;
-+
-+		if (ocelot_port->phy_mode == PHY_INTERFACE_MODE_USXGMII)
-+			is_c45 = true;
-+
-+		pcs = get_phy_device(felix->imdio, port, is_c45);
-+		if (IS_ERR(pcs))
-+			continue;
-+
-+		pcs->interface = ocelot_port->phy_mode;
-+		felix->pcs[port] = pcs;
-+
-+		dev_info(dev, "Found PCS at internal MDIO address %d\n", port);
-+	}
-+
-+	return 0;
-+}
-+
-+static void vsc9959_mdio_bus_free(struct ocelot *ocelot)
-+{
-+	struct felix *felix = ocelot_to_felix(ocelot);
-+	int port;
-+
-+	for (port = 0; port < ocelot->num_phys_ports; port++) {
-+		struct phy_device *pcs = felix->pcs[port];
-+
-+		if (!pcs)
-+			continue;
-+
-+		put_device(&pcs->mdio.dev);
-+	}
-+	mdiobus_unregister(felix->imdio);
-+}
-+
- struct felix_info felix_info_vsc9959 = {
- 	.target_io_res		= vsc9959_target_io_res,
- 	.port_io_res		= vsc9959_port_io_res,
-+	.imdio_res		= &vsc9959_imdio_res,
- 	.regfields		= vsc9959_regfields,
- 	.map			= vsc9959_regmap,
- 	.ops			= &vsc9959_ops,
-@@ -583,5 +1075,12 @@ struct felix_info felix_info_vsc9959 = {
- 	.num_stats		= ARRAY_SIZE(vsc9959_stats_layout),
- 	.shared_queue_sz	= 128 * 1024,
- 	.num_ports		= 6,
--	.pci_bar		= 4,
-+	.switch_pci_bar		= 4,
-+	.imdio_pci_bar		= 0,
-+	.mdio_bus_alloc		= vsc9959_mdio_bus_alloc,
-+	.mdio_bus_free		= vsc9959_mdio_bus_free,
-+	.pcs_init		= vsc9959_pcs_init,
-+	.pcs_an_restart		= vsc9959_pcs_an_restart,
-+	.pcs_link_state		= vsc9959_pcs_link_state,
-+	.prevalidate_phy_mode	= vsc9959_prevalidate_phy_mode,
- };
diff --git a/target/linux/layerscape/patches-5.4/701-net-0387-net-phy-vsc8514-enable-in-band-SGMII-auto-negotiatio.patch b/target/linux/layerscape/patches-5.4/701-net-0387-net-phy-vsc8514-enable-in-band-SGMII-auto-negotiatio.patch
deleted file mode 100644
index 8aaafe5dcc..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0387-net-phy-vsc8514-enable-in-band-SGMII-auto-negotiatio.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From ebfedac745f6d747df2214e11a89ba44742b3def Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Fri, 27 Dec 2019 21:44:46 +0200
-Subject: [PATCH] net: phy: vsc8514: enable in-band SGMII auto-negotiation
- setting
-
-The default in-band AN setting for the VSC8514 PHY is not very reliable:
-its out-of-reset state is with SerDes AN disabled, but certain boot
-firmware (such as U-Boot) enables it during the boot process.
-
-So its final state as seen by Linux depends on whether the U-Boot PHY
-driver has run or not.
-
-If SGMII auto-negotiation is enabled but not acknowledged by the MAC,
-the PHY does not pass traffic.
-
-But otherwise, it is able to pass traffic both with AN disabled, and
-with AN enabled.
-
-We would like to make this explicitly configurable rather than hardcoded
-as "on" as we are doing right now, but we'd rather hardcode it in LSDK
-and wait until a solution lands upstream, than invent a solution for
-this here.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- drivers/net/phy/mscc.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/net/phy/mscc.c
-+++ b/drivers/net/phy/mscc.c
-@@ -176,6 +176,8 @@ enum rgmii_rx_clock_delay {
- #define SECURE_ON_PASSWD_LEN_4		  0x4000
- 
- /* Extended Page 3 Registers */
-+#define MSCC_PHY_SERDES_CON		  16
-+#define MSCC_PHY_SERDES_ANEG		  BIT(7)
- #define MSCC_PHY_SERDES_TX_VALID_CNT	  21
- #define MSCC_PHY_SERDES_TX_CRC_ERR_CNT	  22
- #define MSCC_PHY_SERDES_RX_VALID_CNT	  28
-@@ -2131,6 +2133,14 @@ static int vsc8514_config_init(struct ph
- 
- 	mutex_unlock(&phydev->mdio.bus->mdio_lock);
- 
-+	ret = phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED_3);
-+	if (ret)
-+		return ret;
-+
-+	ret = phy_set_bits(phydev, MSCC_PHY_SERDES_CON, MSCC_PHY_SERDES_ANEG);
-+	if (ret)
-+		return ret;
-+
- 	ret = phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
- 
- 	if (ret)
diff --git a/target/linux/layerscape/patches-5.4/701-net-0388-drivers-net-phy-aquantia-Add-XFI-counters.patch b/target/linux/layerscape/patches-5.4/701-net-0388-drivers-net-phy-aquantia-Add-XFI-counters.patch
deleted file mode 100644
index 8c65e3a492..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0388-drivers-net-phy-aquantia-Add-XFI-counters.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 30da8769107ce2112f3dc356fd06f0fa5bed7742 Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Mon, 6 Jan 2020 17:57:10 +0200
-Subject: [PATCH] drivers: net: phy: aquantia: Add XFI counters
-
-Adds XFI counters and enables counters for AQR112/412.  These are gen 3
-PHYs, the register map is compatible with AQR107 which is gen 2.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/phy/aquantia_main.c | 27 ++++++++++++++++++++++++---
- 1 file changed, 24 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
-@@ -25,6 +25,12 @@
- #define PHY_ID_AQR112	0x03a1b662
- #define PHY_ID_AQR412	0x03a1b712
- 
-+/* PCS counters */
-+#define MDIO_C45_PCS_STAT_XFI_TX_GOOD_FRAMES	0xc860
-+#define MDIO_C45_PCS_STAT_XFI_TX_BAD_FRAMES	0xc862
-+#define MDIO_C45_PCS_STAT_XFI_RX_GOOD_FRAMES	0xe860
-+#define MDIO_C45_PCS_STAT_XFI_RX_BAD_FRAMES	0xe862
-+
- #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
- #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
- #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR	0
-@@ -153,9 +159,12 @@ struct aqr107_hw_stat {
- 	const char *name;
- 	int reg;
- 	int size;
-+	int devad;
- };
- 
--#define SGMII_STAT(n, r, s) { n, MDIO_C22EXT_STAT_SGMII_ ## r, s }
-+#define SGMII_STAT(n, r, s) { n, MDIO_C22EXT_STAT_SGMII_ ## r, s, \
-+			      MDIO_MMD_C22EXT}
-+#define C45_PCS_STAT(n, r, s) { n, MDIO_C45_PCS_STAT_ ## r, s, MDIO_MMD_PCS }
- static const struct aqr107_hw_stat aqr107_hw_stats[] = {
- 	SGMII_STAT("sgmii_rx_good_frames",	    RX_GOOD_FRAMES,	26),
- 	SGMII_STAT("sgmii_rx_bad_frames",	    RX_BAD_FRAMES,	26),
-@@ -167,6 +176,10 @@ static const struct aqr107_hw_stat aqr10
- 	SGMII_STAT("sgmii_tx_line_collisions",	    TX_LINE_COLLISIONS,	 8),
- 	SGMII_STAT("sgmii_tx_frame_alignment_err",  TX_FRAME_ALIGN_ERR,	16),
- 	SGMII_STAT("sgmii_tx_runt_frames",	    TX_RUNT_FRAMES,	22),
-+	C45_PCS_STAT("xfi_rx_good_frames",	    XFI_RX_GOOD_FRAMES,	26),
-+	C45_PCS_STAT("xfi_rx_bad_frames",	    XFI_RX_BAD_FRAMES,	26),
-+	C45_PCS_STAT("xfi_tx_good_frames",	    XFI_TX_GOOD_FRAMES,	26),
-+	C45_PCS_STAT("xfi_tx_bad_frames",	    XFI_TX_BAD_FRAMES,	26),
- };
- #define AQR107_SGMII_STAT_SZ ARRAY_SIZE(aqr107_hw_stats)
- 
-@@ -196,13 +209,13 @@ static u64 aqr107_get_stat(struct phy_de
- 	u64 ret;
- 	int val;
- 
--	val = phy_read_mmd(phydev, MDIO_MMD_C22EXT, stat->reg);
-+	val = phy_read_mmd(phydev, stat->devad, stat->reg);
- 	if (val < 0)
- 		return U64_MAX;
- 
- 	ret = val & GENMASK(len_l - 1, 0);
- 	if (len_h) {
--		val = phy_read_mmd(phydev, MDIO_MMD_C22EXT, stat->reg + 1);
-+		val = phy_read_mmd(phydev, stat->devad, stat->reg + 1);
- 		if (val < 0)
- 			return U64_MAX;
- 
-@@ -768,18 +781,26 @@ static struct phy_driver aqr_driver[] =
- {
- 	PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
- 	.name		= "Aquantia AQR112",
-+	.probe		= aqr107_probe,
- 	.config_aneg    = aqr_config_aneg_set_prot,
- 	.config_intr	= aqr_config_intr,
- 	.ack_interrupt	= aqr_ack_interrupt,
- 	.read_status	= aqr_read_status,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
- },
- {
- 	PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
- 	.name		= "Aquantia AQR412",
-+	.probe		= aqr107_probe,
- 	.config_aneg    = aqr_config_aneg_set_prot,
- 	.config_intr	= aqr_config_intr,
- 	.ack_interrupt	= aqr_ack_interrupt,
- 	.read_status	= aqr_read_status,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
- },
- };
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0389-drivers-net-felix-set-link-based-on-BMSR-not-LPA.patch b/target/linux/layerscape/patches-5.4/701-net-0389-drivers-net-felix-set-link-based-on-BMSR-not-LPA.patch
deleted file mode 100644
index 1d8f1f4480..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0389-drivers-net-felix-set-link-based-on-BMSR-not-LPA.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From a40da00390f47fa698ef9ef9a2c82d427f6f8aa6 Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Tue, 7 Jan 2020 16:44:20 +0200
-Subject: [PATCH] drivers: net: felix: set link based on BMSR, not LPA
-
-At least some PHYs don't advertise link up during system side AN, rely on
-local indication from internal PHYs for link state.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/dsa/ocelot/felix_vsc9959.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/net/dsa/ocelot/felix_vsc9959.c
-+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
-@@ -896,7 +896,6 @@ static void vsc9959_pcs_link_state_usxgm
- 		break;
- 	}
- 
--	pcs->link = USXGMII_LPA_LNKS(lpa);
- 	if (USXGMII_LPA_DUPLEX(lpa))
- 		pcs->duplex = DUPLEX_FULL;
- 	else
diff --git a/target/linux/layerscape/patches-5.4/701-net-0390-drivers-net-phylink-in-band-AN-for-USXGMII.patch b/target/linux/layerscape/patches-5.4/701-net-0390-drivers-net-phylink-in-band-AN-for-USXGMII.patch
deleted file mode 100644
index a805c35d58..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0390-drivers-net-phylink-in-band-AN-for-USXGMII.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From a1d37fce23d69a51a299b848d0a5700d64e6db4e Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Tue, 7 Jan 2020 16:48:05 +0200
-Subject: [PATCH] drivers: net: phylink: in-band AN for USXGMII
-
-USXGMII supports passing link information in-band between PHY and MAC PCS,
-add it to the list of protocls that support in-band AN mode.
-
-TODO:
-Add 2500baseT, 5GbaseT, 10GbaseT.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/phy/phylink.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -300,6 +300,16 @@ static int phylink_parse_mode(struct phy
- 			phylink_set(pl->supported, 2500baseX_Full);
- 			break;
- 
-+		case PHY_INTERFACE_MODE_USXGMII:
-+			phylink_set(pl->supported, 10baseT_Half);
-+			phylink_set(pl->supported, 10baseT_Full);
-+			phylink_set(pl->supported, 100baseT_Half);
-+			phylink_set(pl->supported, 100baseT_Full);
-+			phylink_set(pl->supported, 1000baseT_Half);
-+			phylink_set(pl->supported, 1000baseT_Full);
-+			phylink_set(pl->supported, 2500baseX_Full);
-+			break;
-+
- 		case PHY_INTERFACE_MODE_10GKR:
- 			phylink_set(pl->supported, 10baseT_Half);
- 			phylink_set(pl->supported, 10baseT_Full);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0391-drivers-net-phy-don-t-crash-in-phy_read-_write_mmd-w.patch b/target/linux/layerscape/patches-5.4/701-net-0391-drivers-net-phy-don-t-crash-in-phy_read-_write_mmd-w.patch
deleted file mode 100644
index 532715d0bc..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0391-drivers-net-phy-don-t-crash-in-phy_read-_write_mmd-w.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 8e515a39805c013229698e1a142e16701f07edf9 Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Tue, 7 Jan 2020 16:50:31 +0200
-Subject: [PATCH] drivers: net: phy: don't crash in phy_read/_write_mmd without
- a PHY driver
-
-The APIs can be used by Ethernet drivers to configure internal PHYs
-without actually loading a PHY driver.  Check that drv is not NULL before
-reading from it.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/phy/phy-core.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/phy-core.c
-+++ b/drivers/net/phy/phy-core.c
-@@ -379,7 +379,7 @@ int __phy_read_mmd(struct phy_device *ph
- 	if (regnum > (u16)~0 || devad > 32)
- 		return -EINVAL;
- 
--	if (phydev->drv->read_mmd) {
-+	if (phydev->drv && phydev->drv->read_mmd) {
- 		val = phydev->drv->read_mmd(phydev, devad, regnum);
- 	} else if (phydev->is_c45) {
- 		u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
-@@ -436,7 +436,7 @@ int __phy_write_mmd(struct phy_device *p
- 	if (regnum > (u16)~0 || devad > 32)
- 		return -EINVAL;
- 
--	if (phydev->drv->write_mmd) {
-+	if (phydev->drv && phydev->drv->write_mmd) {
- 		ret = phydev->drv->write_mmd(phydev, devad, regnum, val);
- 	} else if (phydev->is_c45) {
- 		u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0392-drivers-net-dsa-felix-Allow-PHY-to-AN-10-100-1000-wi.patch b/target/linux/layerscape/patches-5.4/701-net-0392-drivers-net-dsa-felix-Allow-PHY-to-AN-10-100-1000-wi.patch
deleted file mode 100644
index 68c21a2cd7..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0392-drivers-net-dsa-felix-Allow-PHY-to-AN-10-100-1000-wi.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From b3841e7de0be51ddb4e0d17ab0561a12c6db2753 Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Wed, 8 Jan 2020 12:34:33 +0200
-Subject: [PATCH] drivers: net: dsa: felix: Allow PHY to AN 10/100/1000 with
- 2500 serdes link
-
-If the serdes link is set to 2500 using interfce type 2500base-X, lower
-link speeds over on the line side should still be supported.
-Rate adaptation is done out of band, in our case using AQR PHYs this is
-done using flow control.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/dsa/ocelot/felix.c | 9 ++++-----
- 1 file changed, 4 insertions(+), 5 deletions(-)
-
---- a/drivers/net/dsa/ocelot/felix.c
-+++ b/drivers/net/dsa/ocelot/felix.c
-@@ -218,11 +218,10 @@ static void felix_phylink_validate(struc
- 	phylink_set(mask, Autoneg);
- 	phylink_set(mask, Pause);
- 	phylink_set(mask, Asym_Pause);
--	if (state->interface != PHY_INTERFACE_MODE_2500BASEX) {
--		phylink_set(mask, 10baseT_Full);
--		phylink_set(mask, 100baseT_Full);
--		phylink_set(mask, 1000baseT_Full);
--	}
-+	phylink_set(mask, 10baseT_Full);
-+	phylink_set(mask, 100baseT_Full);
-+	phylink_set(mask, 1000baseT_Full);
-+
- 	/* The internal ports that run at 2.5G are overclocked GMII */
- 	if (state->interface == PHY_INTERFACE_MODE_GMII ||
- 	    state->interface == PHY_INTERFACE_MODE_2500BASEX ||
diff --git a/target/linux/layerscape/patches-5.4/701-net-0393-drivers-net-dsa-felix-Handle-PAUSE-Rx-regardless-of-.patch b/target/linux/layerscape/patches-5.4/701-net-0393-drivers-net-dsa-felix-Handle-PAUSE-Rx-regardless-of-.patch
deleted file mode 100644
index 887ca36e04..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0393-drivers-net-dsa-felix-Handle-PAUSE-Rx-regardless-of-.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 774408ea6a55b9d40b7bdc4ff4e33f1464c605c9 Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Wed, 8 Jan 2020 13:15:07 +0200
-Subject: [PATCH] drivers: net: dsa: felix: Handle PAUSE Rx regardless of AN
- result
-
-Flow control is used with 2500Base-X and AQR PHYs to do rate adapation
-between line side 100/1000 links and MAC running at 2.5G.  This is
-independent of the flow control configuration settled on line side though
-AN.  In general allowing MAC to handle flow control even though AN did
-not enable it explicitly should not be a problem, so the patch enables
-it in all cases.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/dsa/ocelot/felix.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/net/dsa/ocelot/felix.c
-+++ b/drivers/net/dsa/ocelot/felix.c
-@@ -267,8 +267,12 @@ static void felix_phylink_mac_config(str
- 	 * specification in incoming pause frames.
- 	 */
- 	mac_fc_cfg = SYS_MAC_FC_CFG_FC_LINK_SPEED(state->speed);
--	if (state->pause & MLO_PAUSE_RX)
--		mac_fc_cfg |= SYS_MAC_FC_CFG_RX_FC_ENA;
-+
-+	/* handle Rx pause in all cases, with 2500base-X this is used for rate
-+	 * adaptation.
-+	 */
-+	mac_fc_cfg |= SYS_MAC_FC_CFG_RX_FC_ENA;
-+
- 	if (state->pause & MLO_PAUSE_TX)
- 		mac_fc_cfg |= SYS_MAC_FC_CFG_TX_FC_ENA |
- 			      SYS_MAC_FC_CFG_PAUSE_VAL_CFG(0xffff) |
diff --git a/target/linux/layerscape/patches-5.4/701-net-0394-drivers-net-mscc_ocelot-don-t-flood-unicast-traffic-.patch b/target/linux/layerscape/patches-5.4/701-net-0394-drivers-net-mscc_ocelot-don-t-flood-unicast-traffic-.patch
deleted file mode 100644
index a37cf66def..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0394-drivers-net-mscc_ocelot-don-t-flood-unicast-traffic-.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 714e8c634821b340c191a157e8c4e0b1afd53dfc Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Wed, 8 Jan 2020 15:21:53 +0200
-Subject: [PATCH] drivers: net: mscc_ocelot: don't flood unicast traffic to cpu
-
-Switch cpu port doesn't learn MAC addresses and the local bridge dev_addr
-must be explicitly added to the bridge.
-This is done whenever a port is added to a bridge, ports following the
-1st one will just overwrite the same entry.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/ethernet/mscc/ocelot.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -1677,6 +1677,8 @@ static int ocelot_port_obj_del(struct ne
- int ocelot_port_bridge_join(struct ocelot *ocelot, int port,
- 			    struct net_device *bridge)
- {
-+	struct ocelot_port *ocelot_port = ocelot->ports[port];
-+
- 	if (!ocelot->bridge_mask) {
- 		ocelot->hw_bridge_dev = bridge;
- 	} else {
-@@ -1688,6 +1690,12 @@ int ocelot_port_bridge_join(struct ocelo
- 
- 	ocelot->bridge_mask |= BIT(port);
- 
-+	/* Direct CPU traffic to PCU port, this should override any existing
-+	 * entries
-+	 */
-+	ocelot_mact_learn(ocelot, PGID_CPU, bridge->dev_addr, ocelot_port->pvid,
-+			  ENTRYTYPE_LOCKED);
-+
- 	return 0;
- }
- EXPORT_SYMBOL(ocelot_port_bridge_join);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0395-LF-183-sdk_fman-add-an-option-for-RTC-1588-timer-ini.patch b/target/linux/layerscape/patches-5.4/701-net-0395-LF-183-sdk_fman-add-an-option-for-RTC-1588-timer-ini.patch
deleted file mode 100644
index 138d2b666f..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0395-LF-183-sdk_fman-add-an-option-for-RTC-1588-timer-ini.patch
+++ /dev/null
@@ -1,215 +0,0 @@
-From f7ed64503d5e27571833b76acee721d00448fdec Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Mon, 2 Sep 2019 15:33:16 +0800
-Subject: [PATCH] LF-183 sdk_fman: add an option for RTC (1588 timer)
- initialization and APIs
-
-The RTC (1588 timer) could be managed by either ptp_qoriq driver
-or sdk_fman RTC driver. So add an option for sdk_fman RTC
-(1588 timer) initialization and APIs, so that user could select
-it or not.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_fman/Kconfig    |  9 +++++++++
- .../freescale/sdk_fman/Peripherals/FM/Makefile     |  3 ++-
- .../freescale/sdk_fman/Peripherals/FM/fm.c         |  4 ++++
- .../sdk_fman/src/inc/wrapper/lnxwrp_fsl_fman.h     | 22 ++++++++++++++++++++++
- .../freescale/sdk_fman/src/wrapper/lnxwrp_fm.c     | 18 +++++++++++++-----
- 5 files changed, 50 insertions(+), 6 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/Kconfig
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Kconfig
-@@ -49,6 +49,15 @@ config FMAN_V3L
- endchoice
- endmenu
- 
-+config FSL_SDK_FMAN_RTC_API
-+	bool "FMan RTC (1588 timer) APIs"
-+	default n
-+	help
-+		This option enables RTC (1588 timer) initialization and
-+		APIs support. The ptp_qoriq driver is not available if
-+		it is selected for RTC (1588 timer). Neither of them
-+		were not able to be used together.
-+
- config FMAN_MIB_CNT_OVF_IRQ_EN
- 	bool "Enable the dTSEC MIB counters overflow interrupt"
- 	default n
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Makefile
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Makefile
-@@ -19,5 +19,6 @@ obj-y		+= Pcd/
- obj-y		+= SP/
- obj-y		+= Port/
- obj-y		+= HC/
--obj-y		+= Rtc/
- obj-y		+= MACSEC/
-+
-+obj-$(CONFIG_FSL_SDK_FMAN_RTC_API)	+= Rtc/
---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/fm.c
-@@ -602,8 +602,10 @@ do {
-         FM_G_CALL_10G_MAC_ISR(0);
-     if (pending & INTR_EN_10G_MAC1)
-         FM_G_CALL_10G_MAC_ISR(1);
-+#ifdef CONFIG_FSL_SDK_FMAN_RTC_API
-     if (pending & INTR_EN_TMR)
-         p_Fm->intrMng[e_FM_EV_TMR].f_Isr(p_Fm->intrMng[e_FM_EV_TMR].h_SrcHandle);
-+#endif
- }
- 
- #if (DPAA_VERSION >= 11)
-@@ -4318,8 +4320,10 @@ void FM_EventIsr(t_Handle h_Fm)
-         p_Fm->intrMng[e_FM_EV_PRS].f_Isr(p_Fm->intrMng[e_FM_EV_PRS].h_SrcHandle);
-     if (pending & INTR_EN_PLCR)
-         p_Fm->intrMng[e_FM_EV_PLCR].f_Isr(p_Fm->intrMng[e_FM_EV_PLCR].h_SrcHandle);
-+#ifdef CONFIG_FSL_SDK_FMAN_RTC_API
-     if (pending & INTR_EN_TMR)
-             p_Fm->intrMng[e_FM_EV_TMR].f_Isr(p_Fm->intrMng[e_FM_EV_TMR].h_SrcHandle);
-+#endif
- 
-     /* MAC events may belong to different partitions */
-     if (pending & INTR_EN_1G_MAC0)
---- a/drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/lnxwrp_fsl_fman.h
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/inc/wrapper/lnxwrp_fsl_fman.h
-@@ -802,6 +802,7 @@ int fm_mac_set_rx_pause_frames(
- int fm_mac_set_tx_pause_frames(struct fm_mac_dev *fm_mac_dev,
- 					     bool en);
- 
-+#ifdef CONFIG_FSL_SDK_FMAN_RTC_API
- int fm_rtc_enable(struct fm *fm_dev);
- 
- int fm_rtc_disable(struct fm *fm_dev);
-@@ -819,6 +820,27 @@ int fm_rtc_set_alarm(struct fm *fm_dev,
- 
- int fm_rtc_set_fiper(struct fm *fm_dev, uint32_t id,
- 		uint64_t fiper);
-+#else
-+static inline int fm_rtc_enable(struct fm *fm_dev) { return 0; }
-+
-+static inline int fm_rtc_disable(struct fm *fm_dev) { return 0; }
-+
-+static inline int fm_rtc_get_cnt(struct fm *fm_dev, uint64_t *ts) { return 0; }
-+
-+static inline int fm_rtc_set_cnt(struct fm *fm_dev, uint64_t ts) { return 0; }
-+
-+static inline int fm_rtc_get_drift(struct fm *fm_dev, uint32_t *drift)
-+{ return 0; }
-+
-+static inline int fm_rtc_set_drift(struct fm *fm_dev, uint32_t drift)
-+{ return 0; }
-+
-+static inline int fm_rtc_set_alarm(struct fm *fm_dev, uint32_t id,
-+				   uint64_t time) { return 0; }
-+
-+static inline int fm_rtc_set_fiper(struct fm *fm_dev, uint32_t id,
-+				   uint64_t fiper) { return 0; }
-+#endif
- 
- int fm_mac_set_wol(struct fm_port *port, struct fm_mac_dev *fm_mac_dev,
- 			bool en);
---- a/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-+++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c
-@@ -695,11 +695,7 @@ static t_LnxWrpFmDev * ReadFmDevTreeNode
-         }
-     }
- 
--/* DPAA PTP timer was managed by ptp_qoriq driver in drivers/ptp/.
-- * We will no longer manage it in sdk_fman driver and use related
-- * APIs.
-- */
--#if 0
-+#ifdef CONFIG_FSL_SDK_FMAN_RTC_API
-     /* Get the RTC base address and size */
-     memset(ids, 0, sizeof(ids));
-     if (WARN_ON(strlen("ptp-timer") >= sizeof(ids[0].name)))
-@@ -941,6 +937,7 @@ static t_Error ConfigureFmDev(t_LnxWrpFm
-     if (SYS_RegisterIoMap((uint64_t)p_LnxWrpFmDev->fmMuramBaseAddr, (uint64_t)p_LnxWrpFmDev->fmMuramPhysBaseAddr, p_LnxWrpFmDev->fmMuramMemSize) != E_OK)
-         RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM MURAM memory map"));
- 
-+#ifdef CONFIG_FSL_SDK_FMAN_RTC_API
-     if (p_LnxWrpFmDev->fmRtcPhysBaseAddr)
-     {
-         dev_res = __devm_request_region(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->res, p_LnxWrpFmDev->fmRtcPhysBaseAddr, p_LnxWrpFmDev->fmRtcMemSize, "fman-ptp-timer");
-@@ -954,6 +951,7 @@ static t_Error ConfigureFmDev(t_LnxWrpFm
-         if (SYS_RegisterIoMap((uint64_t)p_LnxWrpFmDev->fmRtcBaseAddr, (uint64_t)p_LnxWrpFmDev->fmRtcPhysBaseAddr, p_LnxWrpFmDev->fmRtcMemSize) != E_OK)
-             RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM-RTC memory map"));
-     }
-+#endif
- 
- #if (DPAA_VERSION >= 11)
-     if (p_LnxWrpFmDev->fmVspPhysBaseAddr) {
-@@ -1187,6 +1185,7 @@ static t_Error InitFmDev(t_LnxWrpFmDev
-          * FM_SetException(p_LnxWrpFmDev->h_Dev,e_FM_EX_MURAM_ECC,FALSE);*/
-     }
- 
-+#ifdef CONFIG_FSL_SDK_FMAN_RTC_API
-     if (p_LnxWrpFmDev->fmRtcBaseAddr)
-     {
-         t_FmRtcParams   fmRtcParam;
-@@ -1205,6 +1204,7 @@ static t_Error InitFmDev(t_LnxWrpFmDev
-         if (FM_RTC_Init(p_LnxWrpFmDev->h_RtcDev) != E_OK)
-             RETURN_ERROR(MAJOR, E_INVALID_STATE, ("FM-RTC"));
-     }
-+#endif
- 
-     return E_OK;
- }
-@@ -1219,8 +1219,10 @@ static void FreeFmDev(t_LnxWrpFmDev  *p_
- 
-     FreeFmPcdDev(p_LnxWrpFmDev);
- 
-+#ifdef CONFIG_FSL_SDK_FMAN_RTC_API
-     if (p_LnxWrpFmDev->h_RtcDev)
- 	FM_RTC_Free(p_LnxWrpFmDev->h_RtcDev);
-+#endif
- 
-     if (p_LnxWrpFmDev->h_Dev)
-         FM_Free(p_LnxWrpFmDev->h_Dev);
-@@ -1228,12 +1230,14 @@ static void FreeFmDev(t_LnxWrpFmDev  *p_
-     if (p_LnxWrpFmDev->h_MuramDev)
-         FM_MURAM_Free(p_LnxWrpFmDev->h_MuramDev);
- 
-+#ifdef CONFIG_FSL_SDK_FMAN_RTC_API
-     if (p_LnxWrpFmDev->fmRtcBaseAddr)
-     {
-         SYS_UnregisterIoMap(p_LnxWrpFmDev->fmRtcBaseAddr);
-         devm_iounmap(p_LnxWrpFmDev->dev, UINT_TO_PTR(p_LnxWrpFmDev->fmRtcBaseAddr));
-         __devm_release_region(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->res, p_LnxWrpFmDev->fmRtcPhysBaseAddr, p_LnxWrpFmDev->fmRtcMemSize);
-     }
-+#endif
-     SYS_UnregisterIoMap(p_LnxWrpFmDev->fmMuramBaseAddr);
-     devm_iounmap(p_LnxWrpFmDev->dev, UINT_TO_PTR(p_LnxWrpFmDev->fmMuramBaseAddr));
-     __devm_release_region(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->res, p_LnxWrpFmDev->fmMuramPhysBaseAddr, p_LnxWrpFmDev->fmMuramMemSize);
-@@ -1463,6 +1467,7 @@ void * fm_get_handle(struct fm *fm)
- }
- EXPORT_SYMBOL(fm_get_handle);
- 
-+#ifdef CONFIG_FSL_SDK_FMAN_RTC_API
- void * fm_get_rtc_handle(struct fm *fm)
- {
-     t_LnxWrpFmDev       *p_LnxWrpFmDev = (t_LnxWrpFmDev*)fm;
-@@ -1470,6 +1475,7 @@ void * fm_get_rtc_handle(struct fm *fm)
-     return (void *)p_LnxWrpFmDev->h_RtcDev;
- }
- EXPORT_SYMBOL(fm_get_rtc_handle);
-+#endif
- 
- struct fm_port * fm_port_bind (struct device *fm_port_dev)
- {
-@@ -2053,6 +2059,7 @@ int fm_mac_set_tx_pause_frames(struct fm
- #endif
- EXPORT_SYMBOL(fm_mac_set_tx_pause_frames);
- 
-+#ifdef CONFIG_FSL_SDK_FMAN_RTC_API
- int fm_rtc_enable(struct fm *fm_dev)
- {
- 	int			 _errno;
-@@ -2209,6 +2216,7 @@ int fm_rtc_disable_interrupt(struct fm *
- }
- EXPORT_SYMBOL(fm_rtc_disable_interrupt);
- #endif
-+#endif /* CONFIG_FSL_SDK_FMAN_RTC_API */
- 
- int fm_mac_set_wol(struct fm_port *port, struct fm_mac_dev *fm_mac_dev, bool en)
- {
diff --git a/target/linux/layerscape/patches-5.4/701-net-0396-LF-183-ptp-depend-on-FSL_SDK_FMAN_RTC_API-for-ptp_qo.patch b/target/linux/layerscape/patches-5.4/701-net-0396-LF-183-ptp-depend-on-FSL_SDK_FMAN_RTC_API-for-ptp_qo.patch
deleted file mode 100644
index 09021db155..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0396-LF-183-ptp-depend-on-FSL_SDK_FMAN_RTC_API-for-ptp_qo.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 9dad88f61f7400939a4076b641b6cd80904358cf Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Thu, 5 Dec 2019 15:03:05 +0800
-Subject: [PATCH] LF-183 ptp: depend on !FSL_SDK_FMAN_RTC_API for ptp_qoriq
-
-When kernel uses SDK version DPAA/FMan drivers, user could
-select to use ptp_qoriq driver, or FMan RTC driver to manage
-1588 timer. But neither should not be enabled together.
-This patch is to add dependency !FSL_SDK_FMAN_RTC_API for
-ptp_qoriq driver.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/ptp/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/ptp/Kconfig
-+++ b/drivers/ptp/Kconfig
-@@ -44,7 +44,7 @@ config PTP_1588_CLOCK_DTE
- 
- config PTP_1588_CLOCK_QORIQ
- 	tristate "Freescale QorIQ 1588 timer as PTP clock"
--	depends on GIANFAR || FSL_DPAA_ETH || FSL_SDK_DPAA_ETH || FSL_DPAA2_ETH || FSL_ENETC || FSL_ENETC_VF || COMPILE_TEST
-+	depends on !FSL_SDK_FMAN_RTC_API && (GIANFAR || FSL_DPAA_ETH || FSL_SDK_DPAA_ETH || FSL_DPAA2_ETH || FSL_ENETC || FSL_ENETC_VF) || COMPILE_TEST
- 	depends on PTP_1588_CLOCK
- 	default y
- 	help
diff --git a/target/linux/layerscape/patches-5.4/701-net-0397-sdk_dpaa-ceetm-fix-recursive-dependencies.patch b/target/linux/layerscape/patches-5.4/701-net-0397-sdk_dpaa-ceetm-fix-recursive-dependencies.patch
deleted file mode 100644
index dff27a4d35..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0397-sdk_dpaa-ceetm-fix-recursive-dependencies.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-From 03117a1e7db4cd3d745c663c697e446695ebb8e1 Mon Sep 17 00:00:00 2001
-From: Camelia Groza <camelia.groza@nxp.com>
-Date: Wed, 8 Jan 2020 18:41:33 +0200
-Subject: [PATCH] sdk_dpaa: ceetm: fix recursive dependencies
-
-Due to dependencies between the fsl_ceetm and fsl_dpa modules, remove
-the module support for the ceetm driver and integrate it into the main
-DPAA Ethernet driver.
-
-The registration of the CEETM Qdisc was the only operation done at
-module init. Pass the management of the Qdisc register and unregister
-operations to the loading and unloading of the DPAA driver.
-
-Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
----
- drivers/net/ethernet/freescale/sdk_dpaa/Makefile   |  3 +-
- drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c | 19 +++++++++++++
- .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c   | 32 +---------------------
- 3 files changed, 21 insertions(+), 33 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_dpaa/Makefile
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/Makefile
-@@ -20,8 +20,7 @@ endif
- 
- ifeq ($(CONFIG_FSL_DPAA_CEETM),y)
- ccflags-y += -I$(srctree)/drivers/net/ethernet/freescale/sdk_fman/src/wrapper
--obj-$(CONFIG_FSL_SDK_DPAA_ETH) += fsl_ceetm.o
--fsl_ceetm-objs += dpaa_eth_ceetm.o
-+fsl_dpa-objs += dpaa_eth_ceetm.o
- endif
- 
- fsl_mac-objs += mac.o mac-api.o
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
-@@ -72,6 +72,9 @@
- #ifdef CONFIG_FSL_DPAA_DBG_LOOP
- #include "dpaa_debugfs.h"
- #endif /* CONFIG_FSL_DPAA_DBG_LOOP */
-+#ifdef CONFIG_FSL_DPAA_CEETM
-+#include "dpaa_eth_ceetm.h"
-+#endif
- 
- /* CREATE_TRACE_POINTS only needs to be defined once. Other dpa files
-  * using trace events only need to #include <trace/events/sched.h>
-@@ -116,6 +119,10 @@ static uint8_t dpa_priv_common_bpid;
- struct net_device *dpa_loop_netdevs[20];
- #endif
- 
-+#ifdef CONFIG_FSL_DPAA_CEETM
-+extern struct Qdisc_ops ceetm_qdisc_ops;
-+#endif
-+
- #ifdef CONFIG_PM
- 
- static int dpaa_suspend(struct device *dev)
-@@ -1158,6 +1165,14 @@ static int __init __cold dpa_load(void)
- 	pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
- 		KBUILD_BASENAME".c", __func__);
- 
-+#ifdef CONFIG_FSL_DPAA_CEETM
-+	_errno = register_qdisc(&ceetm_qdisc_ops);
-+	if (unlikely(_errno))
-+		pr_err(KBUILD_MODNAME
-+		       ": %s:%hu:%s(): register_qdisc() = %d\n",
-+		       KBUILD_BASENAME ".c", __LINE__, __func__, _errno);
-+#endif
-+
- 	return _errno;
- }
- module_init(dpa_load);
-@@ -1167,6 +1182,10 @@ static void __exit __cold dpa_unload(voi
- 	pr_debug(KBUILD_MODNAME ": -> %s:%s()\n",
- 		KBUILD_BASENAME".c", __func__);
- 
-+#ifdef CONFIG_FSL_DPAA_CEETM
-+	unregister_qdisc(&ceetm_qdisc_ops);
-+#endif
-+
- 	platform_driver_unregister(&dpa_driver);
- 
- #ifdef CONFIG_FSL_DPAA_DBG_LOOP
---- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c
-@@ -33,16 +33,13 @@
- #include <linux/init.h>
- #include "dpaa_eth_ceetm.h"
- 
--#define DPA_CEETM_DESCRIPTION "FSL DPAA CEETM qdisc"
--MODULE_LICENSE("Dual BSD/GPL");
--MODULE_DESCRIPTION(DPA_CEETM_DESCRIPTION);
--
- const struct nla_policy ceetm_policy[TCA_CEETM_MAX + 1] = {
- 	[TCA_CEETM_COPT] = { .len = sizeof(struct tc_ceetm_copt) },
- 	[TCA_CEETM_QOPS] = { .len = sizeof(struct tc_ceetm_qopt) },
- };
- 
- struct Qdisc_ops ceetm_qdisc_ops;
-+EXPORT_SYMBOL(ceetm_qdisc_ops);
- 
- /* Obtain the DCP and the SP ids from the FMan port */
- static void get_dcp_and_sp(struct net_device *dev, enum qm_dc_portal *dcp_id,
-@@ -2086,30 +2083,3 @@ drop:
- 	dev_kfree_skb_any(skb);
- 	return NET_XMIT_SUCCESS;
- }
--EXPORT_SYMBOL(ceetm_tx);
--
--static int __init ceetm_register(void)
--{
--	int _errno = 0;
--
--	pr_info(KBUILD_MODNAME ": " DPA_CEETM_DESCRIPTION "\n");
--
--	_errno = register_qdisc(&ceetm_qdisc_ops);
--	if (unlikely(_errno))
--		pr_err(KBUILD_MODNAME
--		       ": %s:%hu:%s(): register_qdisc() = %d\n",
--		       KBUILD_BASENAME ".c", __LINE__, __func__, _errno);
--
--	return _errno;
--}
--
--static void __exit ceetm_unregister(void)
--{
--	pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
--		 KBUILD_BASENAME ".c", __func__);
--
--	unregister_qdisc(&ceetm_qdisc_ops);
--}
--
--module_init(ceetm_register);
--module_exit(ceetm_unregister);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0398-enetc-add-ioctl-support-for-PHY-related-ops.patch b/target/linux/layerscape/patches-5.4/701-net-0398-enetc-add-ioctl-support-for-PHY-related-ops.patch
deleted file mode 100644
index 6865f23169..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0398-enetc-add-ioctl-support-for-PHY-related-ops.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From d3fe9bfb9c854ce3acb7db099d9c9476e4fe2ea7 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Thu, 7 Nov 2019 09:39:37 +0100
-Subject: [PATCH] enetc: add ioctl() support for PHY-related ops
-
-If there is an attached PHY try to handle the requested ioctl with its
-handler, which allows the userspace to access PHY registers, for
-example. This will make mii-diag and similar tools work.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/freescale/enetc/enetc.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
-@@ -1653,7 +1653,10 @@ int enetc_ioctl(struct net_device *ndev,
- 	if (cmd == SIOCGHWTSTAMP)
- 		return enetc_hwtstamp_get(ndev, rq);
- #endif
--	return -EINVAL;
-+
-+	if (!ndev->phydev)
-+		return -EINVAL;
-+	return phy_mii_ioctl(ndev->phydev, rq, cmd);
- }
- 
- int enetc_alloc_msix(struct enetc_ndev_priv *priv)
diff --git a/target/linux/layerscape/patches-5.4/701-net-0399-staging-fsl_ppfe-eth-Enhance-error-checking-in-platf.patch b/target/linux/layerscape/patches-5.4/701-net-0399-staging-fsl_ppfe-eth-Enhance-error-checking-in-platf.patch
deleted file mode 100644
index bcc67e869e..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0399-staging-fsl_ppfe-eth-Enhance-error-checking-in-platf.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 1ccc18ca96d8a824f2af45d1046d23ccdb90f3df Mon Sep 17 00:00:00 2001
-From: Anji Jagarlmudi <anji.jagarlmudi@nxp.com>
-Date: Wed, 8 Jan 2020 12:18:40 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: Enhance error checking in platform
- probe
-
-Fix the kernel crash when MAC addr is not passed in dtb.
-
-Signed-off-by: Anji Jagarlmudi <anji.jagarlmudi@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-+++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-@@ -31,7 +31,11 @@ static int pfe_get_gemac_if_properties(s
- 	const u32 *addr;
- 
- 	addr = of_get_property(gem, "reg", &size);
--	port = be32_to_cpup(addr);
-+	if (addr)
-+		port = be32_to_cpup(addr);
-+	else
-+		goto err;
-+
- 
- 	pdata->ls1012a_eth_pdata[port].gem_id = port;
- 
diff --git a/target/linux/layerscape/patches-5.4/701-net-0400-drivers-staging-fsl_qbman-Disable-Portal-Channel-IRQ.patch b/target/linux/layerscape/patches-5.4/701-net-0400-drivers-staging-fsl_qbman-Disable-Portal-Channel-IRQ.patch
deleted file mode 100644
index d9e4b432c2..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0400-drivers-staging-fsl_qbman-Disable-Portal-Channel-IRQ.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 09269e71bfe9ff445ba42e2b88b17d323e434896 Mon Sep 17 00:00:00 2001
-From: Roy Pledge <roy.pledge@nxp.com>
-Date: Mon, 16 Dec 2019 16:59:32 -0500
-Subject: [PATCH] drivers/staging/fsl_qbman: Disable Portal Channel IRQs
-
-Disable portal channel IRQs to avoid them stopping QBMan from
-entering idle mode. Since push mode is used in this driver these
-interrupts are not needed/used.
-
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
-(cherry picked from commit 977cf95ef173bf22b1816e7dbafcbb0f8a151133)
----
- drivers/staging/fsl_qbman/qman_high.c | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
---- a/drivers/staging/fsl_qbman/qman_high.c
-+++ b/drivers/staging/fsl_qbman/qman_high.c
-@@ -737,7 +737,12 @@ struct qman_portal *qman_create_portal(
- 	}
- 	/* Success */
- 	portal->config = config;
--	qm_isr_disable_write(__p, 0);
-+	/*
-+	 * Undisable all the IRQs except the dequeue available bits.
-+	 * If left enabled they cause problems with sleep mode. Since
-+	 * they are not used in push mode we can safely turn them off
-+	 */
-+	qm_isr_disable_write(__p, QM_DQAVAIL_MASK);
- 	qm_isr_uninhibit(__p);
- 	/* Write a sane SDQCR */
- 	qm_dqrr_sdqcr_set(__p, portal->sdqcr);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0401-fsl_qbman-Framework-for-enabling-Link-status-notific.patch b/target/linux/layerscape/patches-5.4/701-net-0401-fsl_qbman-Framework-for-enabling-Link-status-notific.patch
deleted file mode 100644
index b4767511f4..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0401-fsl_qbman-Framework-for-enabling-Link-status-notific.patch
+++ /dev/null
@@ -1,385 +0,0 @@
-From 136d46d2fa27815cc4cc3a57d5e3d54523028768 Mon Sep 17 00:00:00 2001
-From: Sachin Saxena <sachin.saxena@nxp.com>
-Date: Thu, 19 Dec 2019 12:57:35 +0530
-Subject: [PATCH] fsl_qbman: Framework for enabling Link status notification
-
- -  This will enable link update event notification for
-    user space USDPAA application.
-
-Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
-DPDK-2128
-(cherry picked from commit fb53c813a779cc3fc28c8ed3fc8bc0dde24db0ea)
----
- drivers/staging/fsl_qbman/Makefile     |   4 +
- drivers/staging/fsl_qbman/fsl_usdpaa.c | 278 ++++++++++++++++++++++++++++++++-
- include/linux/fsl_usdpaa.h             |  32 ++++
- 3 files changed, 313 insertions(+), 1 deletion(-)
-
---- a/drivers/staging/fsl_qbman/Makefile
-+++ b/drivers/staging/fsl_qbman/Makefile
-@@ -1,5 +1,9 @@
- subdir-ccflags-y := -Werror
- 
-+# Include netcomm SW specific definitions
-+include $(srctree)/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+ccflags-y += -I$(NET_DPA)
-+
- # Common
- obj-$(CONFIG_FSL_SDK_DPA)		+= dpa_alloc.o
- obj-$(CONFIG_FSL_SDK_DPA)	+= qbman_driver.o
---- a/drivers/staging/fsl_qbman/fsl_usdpaa.c
-+++ b/drivers/staging/fsl_qbman/fsl_usdpaa.c
-@@ -18,6 +18,8 @@
- #include <linux/slab.h>
- #include <linux/mman.h>
- #include <linux/of_reserved_mem.h>
-+#include <linux/eventfd.h>
-+#include <linux/fdtable.h>
- 
- #if !(defined(CONFIG_ARM) || defined(CONFIG_ARM64))
- #include <mm/mmu_decl.h>
-@@ -27,6 +29,26 @@
- #include <linux/fsl_usdpaa.h>
- #include "bman_low.h"
- #include "qman_low.h"
-+/* Headers requires for
-+ * Link status support
-+ */
-+#include <linux/device.h>
-+#include <linux/of_mdio.h>
-+#include "mac.h"
-+#include "dpaa_eth_common.h"
-+
-+/* Private data for Proxy Interface */
-+struct dpa_proxy_priv_s {
-+	struct mac_device	*mac_dev;
-+	struct eventfd_ctx	*efd_ctx;
-+};
-+/* Interface Helpers */
-+static inline struct device *get_dev_ptr(char *if_name);
-+static void phy_link_updates(struct net_device *net_dev);
-+/* IOCTL handlers */
-+static inline int ioctl_usdpaa_get_link_status(char *if_name);
-+static int ioctl_en_if_link_status(struct usdpaa_ioctl_link_status *args);
-+static int ioctl_disable_if_link_status(char *if_name);
- 
- /* Physical address range of the memory reservation, exported for mm/mem.c */
- static u64 phys_start;
-@@ -556,7 +578,6 @@ static bool check_portal_channel(void *c
- 
- 
- 
--
- static int usdpaa_release(struct inode *inode, struct file *filp)
- {
- 	int err = 0;
-@@ -1656,6 +1677,220 @@ found:
- 	return 0;
- }
- 
-+
-+static inline struct device *get_dev_ptr(char *if_name)
-+{
-+	struct device *dev;
-+	char node[NODE_NAME_LEN];
-+
-+	sprintf(node, "soc:fsl,dpaa:%s",if_name);
-+	dev = bus_find_device_by_name(&platform_bus_type, NULL, node);
-+	if (dev == NULL) {
-+		pr_err(KBUILD_MODNAME "IF %s not found\n", if_name);
-+		return NULL;
-+	}
-+	pr_debug("%s: found dev 0x%lX  for If %s ,dev->platform_data %p\n",
-+			  __func__, (unsigned long)dev,
-+			  if_name, dev->platform_data);
-+
-+	return dev;
-+}
-+
-+/* This function will return Current link status of the device
-+ * '1' if Link is UP, '0' otherwise.
-+ *
-+ * Input parameter:
-+ * if_name: Interface node name
-+ *
-+ */
-+static inline int ioctl_usdpaa_get_link_status(char *if_name)
-+{
-+	struct net_device *net_dev = NULL;
-+	struct device *dev;
-+
-+	dev = get_dev_ptr(if_name);
-+	if (dev == NULL)
-+		return -ENODEV;
-+	net_dev = dev->platform_data;
-+	if (net_dev == NULL)
-+		return -ENODEV;
-+
-+	if (test_bit(__LINK_STATE_NOCARRIER, &net_dev->state))
-+		return 0; /* Link is DOWN */
-+	else
-+		return 1; /* Link is UP */
-+}
-+
-+
-+/* Link Status Callback Function
-+ * This function will be resgitered to PHY framework to get
-+ * Link update notifications and should be responsible for waking up
-+ * user space task when there is a link update notification.
-+ */
-+static void phy_link_updates(struct net_device *net_dev)
-+{
-+	struct dpa_proxy_priv_s *priv = NULL;
-+
-+	pr_debug("%s: Link '%s': Speed '%d-Mbps': Autoneg '%d': Duplex '%d'\n",
-+		net_dev->name,
-+		ioctl_usdpaa_get_link_status(net_dev->name)?"UP":"DOWN",
-+		net_dev->phydev->speed,
-+		net_dev->phydev->autoneg,
-+		net_dev->phydev->duplex);
-+
-+	/* Wake up the user space context to notify PHY update */
-+	priv = netdev_priv(net_dev);
-+	eventfd_signal(priv->efd_ctx, 1);
-+}
-+
-+
-+/* IOCTL handler for enabling Link status request for a given interface
-+ * Input parameters:
-+ * args->if_name:	This the network interface node name as defind in
-+ *			device tree file. Currently, it has format of
-+ *			"ethernet@x" type for each interface.
-+ * args->efd:		The eventfd value which should be waked up when
-+ *			there is any link update received.
-+ */
-+static int ioctl_en_if_link_status(struct usdpaa_ioctl_link_status *args)
-+{
-+	struct net_device *net_dev = NULL;
-+	struct dpa_proxy_priv_s *priv = NULL;
-+	struct device *dev;
-+	struct mac_device *mac_dev;
-+	struct proxy_device *proxy_dev;
-+	struct task_struct *userspace_task = NULL;
-+	struct file *efd_file = NULL;
-+
-+	dev = get_dev_ptr(args->if_name);
-+	if (dev == NULL)
-+		return -ENODEV;
-+	/* Utilize dev->platform_data to save netdevice
-+	   pointer as it will not be registered */
-+	if (dev->platform_data) {
-+		pr_debug("%s: IF %s already initialized\n",
-+			__func__, args->if_name);
-+		/* This will happen when application is not able to initiate
-+		 * cleanup in last run. We still need to save the new
-+		 * eventfd context.
-+		 */
-+		net_dev = dev->platform_data;
-+		priv = netdev_priv(net_dev);
-+
-+		/* Get current task context from which IOCTL was called */
-+		userspace_task = current;
-+
-+		rcu_read_lock();
-+		efd_file = fcheck_files(userspace_task->files, args->efd);
-+		rcu_read_unlock();
-+
-+		priv->efd_ctx = eventfd_ctx_fileget(efd_file);
-+		if (!priv->efd_ctx) {
-+			pr_err(KBUILD_MODNAME "get eventfd context failed\n");
-+			/* Free the allocated memory for net device */
-+			dev->platform_data = NULL;
-+			free_netdev(net_dev);
-+			return -EINVAL;
-+		}
-+		/* Since there will be NO PHY update as link is already setup,
-+		 * wake user context once so that current PHY status can
-+		 * be fetched.
-+		 */
-+		phy_link_updates(net_dev);
-+		return 0;
-+	}
-+
-+	proxy_dev = dev_get_drvdata(dev);
-+	mac_dev =  proxy_dev->mac_dev;
-+	/* Allocate an dummy net device for proxy interface */
-+	net_dev = alloc_etherdev(sizeof(*priv));
-+	if (!net_dev) {
-+		pr_err(KBUILD_MODNAME "alloc_etherdev failed\n");
-+		return -ENOMEM;
-+	} else {
-+		SET_NETDEV_DEV(net_dev, dev);
-+		priv = netdev_priv(net_dev);
-+		priv->mac_dev = mac_dev;
-+		/* Get current task context from which IOCTL was called */
-+		userspace_task = current;
-+
-+		rcu_read_lock();
-+		efd_file = fcheck_files(userspace_task->files, args->efd);
-+		rcu_read_unlock();
-+
-+		priv->efd_ctx = eventfd_ctx_fileget(efd_file);
-+
-+		if (!priv->efd_ctx) {
-+			pr_err(KBUILD_MODNAME "get eventfd context failed\n");
-+			/* Free the allocated memory for net device */
-+			free_netdev(net_dev);
-+			return -EINVAL;
-+		}
-+		strncpy(net_dev->name, args->if_name, IF_NAME_MAX_LEN);
-+		dev->platform_data = net_dev;
-+	}
-+
-+	pr_debug("%s: mac_dev %p cell_index %d\n",
-+		__func__, mac_dev, mac_dev->cell_index);
-+	mac_dev->phy_dev = of_phy_connect(net_dev, mac_dev->phy_node,
-+	                         phy_link_updates, 0, mac_dev->phy_if);
-+	if (unlikely(mac_dev->phy_dev == NULL) || IS_ERR(mac_dev->phy_dev)) {
-+		pr_err("%s: --------Error in PHY Connect\n", __func__);
-+		/* Free the allocated memory for net device */
-+		free_netdev(net_dev);
-+		return -ENODEV;
-+	}
-+	net_dev->phydev = mac_dev->phy_dev;
-+	mac_dev->start(mac_dev);
-+	pr_debug("%s: --- PHY connected for %s\n", __func__, args->if_name);
-+
-+	return 0;
-+}
-+
-+/* IOCTL handler for disabling Link status for a given interface
-+ * Input parameters:
-+ * if_name:	This the network interface node name as defind in
-+ *		device tree file. Currently, it has format of
-+ *		"ethernet@x" type for each interface.
-+ */
-+static int ioctl_disable_if_link_status(char *if_name)
-+{
-+	struct net_device *net_dev = NULL;
-+	struct device *dev;
-+	struct mac_device *mac_dev;
-+	struct proxy_device *proxy_dev;
-+	struct dpa_proxy_priv_s *priv = NULL;
-+
-+	dev = get_dev_ptr(if_name);
-+	if (dev == NULL)
-+		return -ENODEV;
-+	/* Utilize dev->platform_data to save netdevice
-+	   pointer as it will not be registered */
-+	if (!dev->platform_data) {
-+		pr_debug("%s: IF %s already Disabled for Link status\n",
-+			__func__, if_name);
-+		return 0;
-+	}
-+
-+	net_dev = dev->platform_data;
-+	proxy_dev = dev_get_drvdata(dev);
-+	mac_dev =  proxy_dev->mac_dev;
-+	mac_dev->stop(mac_dev);
-+
-+	priv = netdev_priv(net_dev);
-+	eventfd_ctx_put(priv->efd_ctx);
-+
-+	/* This will also deregister the call back */
-+	phy_disconnect(mac_dev->phy_dev);
-+	phy_resume(mac_dev->phy_dev);
-+
-+	free_netdev(net_dev);
-+	dev->platform_data = NULL;
-+
-+	pr_debug("%s: Link status Disabled for %s\n", __func__, if_name);
-+	return 0;
-+}
-+
- static long usdpaa_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
- {
- 	struct ctx *ctx = fp->private_data;
-@@ -1722,6 +1957,47 @@ static long usdpaa_ioctl(struct file *fp
- 			return -EFAULT;
- 		return ioctl_free_raw_portal(fp, ctx, &input);
- 	}
-+	case USDPAA_IOCTL_ENABLE_LINK_STATUS_INTERRUPT:
-+	{
-+		struct usdpaa_ioctl_link_status input;
-+		int ret;
-+
-+		if (copy_from_user(&input, a, sizeof(input)))
-+			return -EFAULT;
-+		ret = ioctl_en_if_link_status(&input);
-+		if (ret)
-+			pr_err("Error(%d) enable link interrupt:IF: %s\n",
-+				ret, input.if_name);
-+		return ret;
-+	}
-+	case USDPAA_IOCTL_DISABLE_LINK_STATUS_INTERRUPT:
-+	{
-+		char *input;
-+		int ret;
-+
-+		if (copy_from_user(&input, a, sizeof(input)))
-+			return -EFAULT;
-+		ret = ioctl_disable_if_link_status(input);
-+		if (ret)
-+			pr_err("Error(%d) Disabling link interrupt:IF: %s\n",
-+				ret, input);
-+		return ret;
-+	}
-+	case USDPAA_IOCTL_GET_LINK_STATUS:
-+	{
-+		struct usdpaa_ioctl_link_status_args input;
-+
-+		if (copy_from_user(&input, a, sizeof(input)))
-+			return -EFAULT;
-+
-+		input.link_status = ioctl_usdpaa_get_link_status(input.if_name);
-+		if (input.link_status < 0)
-+			return input.link_status;
-+		if (copy_to_user(a, &input, sizeof(input)))
-+			return -EFAULT;
-+
-+		return 0;
-+	}
- 	}
- 	return -EINVAL;
- }
---- a/include/linux/fsl_usdpaa.h
-+++ b/include/linux/fsl_usdpaa.h
-@@ -365,6 +365,38 @@ int dpa_alloc_pop(struct dpa_alloc *allo
- int dpa_alloc_check(struct dpa_alloc *list, u32 id);
- #endif /* __KERNEL__ */
- 
-+
-+/************************************
-+ * Link Status support for user space
-+ * interface
-+ ************************************/
-+#define IF_NAME_MAX_LEN 16
-+#define NODE_NAME_LEN	32
-+
-+struct usdpaa_ioctl_link_status {
-+	/* network device node name */
-+	char		if_name[IF_NAME_MAX_LEN];
-+	/* Eventfd value */
-+	uint32_t	efd;
-+};
-+
-+#define USDPAA_IOCTL_ENABLE_LINK_STATUS_INTERRUPT \
-+	_IOW(USDPAA_IOCTL_MAGIC, 0x0E, struct usdpaa_ioctl_link_status)
-+
-+#define USDPAA_IOCTL_DISABLE_LINK_STATUS_INTERRUPT \
-+	_IOW(USDPAA_IOCTL_MAGIC, 0x0F, char *)
-+
-+struct usdpaa_ioctl_link_status_args {
-+	/* network device node name */
-+	char    if_name[IF_NAME_MAX_LEN];
-+	/* link status(UP/DOWN) */
-+	int     link_status;
-+};
-+
-+#define USDPAA_IOCTL_GET_LINK_STATUS \
-+	_IOWR(USDPAA_IOCTL_MAGIC, 0x10, struct usdpaa_ioctl_link_status_args)
-+
-+
- #ifdef __cplusplus
- }
- #endif
diff --git a/target/linux/layerscape/patches-5.4/701-net-0402-drivers-net-dsa-felix-don-t-restart-PCS-SGMII-AN-if-.patch b/target/linux/layerscape/patches-5.4/701-net-0402-drivers-net-dsa-felix-don-t-restart-PCS-SGMII-AN-if-.patch
deleted file mode 100644
index 5008ca5c77..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0402-drivers-net-dsa-felix-don-t-restart-PCS-SGMII-AN-if-.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 2a2ccfa44e56c45dfd1230f6efb3ec0a4a677f0a Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Wed, 15 Jan 2020 15:49:11 +0200
-Subject: [PATCH] drivers: net: dsa: felix: don't restart PCS SGMII AN if not
- needed
-
-Some PHYs like VSC8234 don't like it when AN restarts on their system side
-and they restart line side AN too, going into an endless link up/down loop.
-Don't restart PCS AN if link is up already.
-
-Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/dsa/ocelot/felix_vsc9959.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/drivers/net/dsa/ocelot/felix_vsc9959.c
-+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
-@@ -648,7 +648,22 @@ static void vsc9959_pcs_init_sgmii(struc
- 				   unsigned int link_an_mode,
- 				   const struct phylink_link_state *state)
- {
-+	int bmsr, bmcr;
-+
- 	if (link_an_mode == MLO_AN_INBAND) {
-+		/* Some PHYs like VSC8234 don't like it when AN restarts on
-+		 * their system  side and they restart line side AN too, going
-+		 * into an endless link up/down loop.  Don't restart PCS AN if
-+		 * link is up already.
-+		 * We do check that AN is enabled just in case this is the 1st
-+		 * call, PCS detects a carrier but AN is disabled from power on
-+		 * or by boot loader.
-+		 */
-+		bmcr = phy_read(pcs, MII_BMCR);
-+		bmsr = phy_read(pcs, MII_BMSR);
-+		if ((bmcr & BMCR_ANENABLE) && (bmsr & BMSR_LSTATUS))
-+			return;
-+
- 		/* SGMII spec requires tx_config_Reg[15:0] to be exactly 0x4001
- 		 * for the MAC PCS in order to acknowledge the AN.
- 		 */
diff --git a/target/linux/layerscape/patches-5.4/701-net-0403-net-dsa-felix-Don-t-error-out-on-disabled-ports-with.patch b/target/linux/layerscape/patches-5.4/701-net-0403-net-dsa-felix-Don-t-error-out-on-disabled-ports-with.patch
deleted file mode 100644
index febb557cdd..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0403-net-dsa-felix-Don-t-error-out-on-disabled-ports-with.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 921af144d0022ae6036024ae4981e774711949a7 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Thu, 16 Jan 2020 20:41:53 +0200
-Subject: [PATCH] net: dsa: felix: Don't error out on disabled ports with no
- phy-mode
-
-The felix_parse_ports_node function was tested only on device trees
-where all ports were enabled. Fix this check so that the driver
-continues to probe only with the ports where status is not "disabled",
-as expected.
-
-Fixes: bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK")
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/ocelot/felix.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/dsa/ocelot/felix.c
-+++ b/drivers/net/dsa/ocelot/felix.c
-@@ -372,7 +372,7 @@ static int felix_parse_ports_node(struct
- 	struct device *dev = felix->ocelot.dev;
- 	struct device_node *child;
- 
--	for_each_child_of_node(ports_node, child) {
-+	for_each_available_child_of_node(ports_node, child) {
- 		phy_interface_t phy_mode;
- 		u32 port;
- 		int err;
diff --git a/target/linux/layerscape/patches-5.4/701-net-0404-LF-457-ocelot-tsn-clean-preempt-interrupt-status.patch b/target/linux/layerscape/patches-5.4/701-net-0404-LF-457-ocelot-tsn-clean-preempt-interrupt-status.patch
deleted file mode 100644
index 96897b5e2a..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0404-LF-457-ocelot-tsn-clean-preempt-interrupt-status.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 5d246e343440ee4915109dac66543d02d71ca900 Mon Sep 17 00:00:00 2001
-From: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
-Date: Tue, 11 Feb 2020 15:33:46 +0800
-Subject: [PATCH] LF-457: ocelot: tsn: clean preempt interrupt status
-
-The INTB interrupt is used both for 1588 interrupt and preemption status
-change interrupt on each port. So clean preempt status interrupt in IRQ
-handle function. Without handling it, driver may get interrupt storm.
-
-Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
-Reviewed-by: Po Liu <Po.Liu@nxp.com>
----
- drivers/net/dsa/ocelot/felix.c         |  5 +----
- drivers/net/ethernet/mscc/ocelot_tsn.c | 14 ++++++++++++++
- include/soc/mscc/ocelot.h              |  1 +
- 3 files changed, 16 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/ocelot/felix.c
-+++ b/drivers/net/dsa/ocelot/felix.c
-@@ -688,12 +688,9 @@ static irqreturn_t felix_irq_handler(int
- 
- 	/* The INTB interrupt is used for both PTP TX timestamp interrupt
- 	 * and preemption status change interrupt on each port.
--	 *
--	 * - Get txtstamp if have
--	 * - TODO: handle preemption. Without handling it, driver may get
--	 *   interrupt storm.
- 	 */
- 
-+	ocelot_preempt_irq_clean(ocelot);
- 	ocelot_get_txtstamp(ocelot);
- 
- 	return IRQ_HANDLED;
---- a/drivers/net/ethernet/mscc/ocelot_tsn.c
-+++ b/drivers/net/ethernet/mscc/ocelot_tsn.c
-@@ -1570,3 +1570,17 @@ int ocelot_dscp_set(struct ocelot *ocelo
- 
- 	return 0;
- }
-+
-+void ocelot_preempt_irq_clean(struct ocelot *ocelot)
-+{
-+	struct ocelot_port *ocelot_port;
-+	int port;
-+	u32 val;
-+
-+	val = DEV_GMII_MM_STATISTICS_MM_STATUS_PRMPT_ACTIVE_STICKY;
-+	for (port = 0; port < ocelot->num_phys_ports; port++) {
-+		ocelot_port = ocelot->ports[port];
-+		ocelot_port_rmwl(ocelot_port, val, val,
-+				 DEV_GMII_MM_STATISTICS_MM_STATUS);
-+	}
-+}
---- a/include/soc/mscc/ocelot.h
-+++ b/include/soc/mscc/ocelot.h
-@@ -592,4 +592,5 @@ int ocelot_rtag_parse_enable(struct ocel
- int ocelot_dscp_set(struct ocelot *ocelot, int port,
- 		    bool enable, const u8 dscp_ix,
- 		    struct tsn_qos_switch_dscp_conf *c);
-+void ocelot_preempt_irq_clean(struct ocelot *ocelot);
- #endif
diff --git a/target/linux/layerscape/patches-5.4/701-net-0406-sdk_qbman-Only-create-debugfs-entries-when-QBMan-is-.patch b/target/linux/layerscape/patches-5.4/701-net-0406-sdk_qbman-Only-create-debugfs-entries-when-QBMan-is-.patch
deleted file mode 100644
index 889aecc383..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0406-sdk_qbman-Only-create-debugfs-entries-when-QBMan-is-.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From f34c01773d5dbd2db04200079bb4d32ecb0cd847 Mon Sep 17 00:00:00 2001
-From: Roy Pledge <roy.pledge@nxp.com>
-Date: Tue, 18 Feb 2020 14:02:21 -0500
-Subject: [PATCH] sdk_qbman: Only create debugfs entries when QBMan is part of
- device tree
-
-Only create debugfs entries if the QBMan nodes exist in the device
-tree.
-
-Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
-Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- drivers/staging/fsl_qbman/bman_debugfs.c |  8 +++++++-
- drivers/staging/fsl_qbman/qman_debugfs.c | 17 ++++++++++-------
- 2 files changed, 17 insertions(+), 8 deletions(-)
-
---- a/drivers/staging/fsl_qbman/bman_debugfs.c
-+++ b/drivers/staging/fsl_qbman/bman_debugfs.c
-@@ -33,6 +33,7 @@
- #include <linux/debugfs.h>
- #include <linux/seq_file.h>
- #include <linux/uaccess.h>
-+#include <linux/of.h>
- 
- static struct dentry *dfs_root; /* debugfs root directory */
- 
-@@ -83,9 +84,14 @@ static int __init bman_debugfs_module_in
- {
- 	int ret = 0;
- 	struct dentry *d;
-+	struct device_node *dn;
- 
-+	dn = of_find_compatible_node(NULL, NULL, "fsl,bman");
-+	if (!dn) {
-+		pr_debug("No fsl,bman node\n");
-+		return 0;
-+	}
- 	dfs_root = debugfs_create_dir("bman", NULL);
--
- 	if (dfs_root == NULL) {
- 		ret = -ENOMEM;
- 		pr_err("Cannot create bman debugfs dir\n");
---- a/drivers/staging/fsl_qbman/qman_debugfs.c
-+++ b/drivers/staging/fsl_qbman/qman_debugfs.c
-@@ -1457,13 +1457,16 @@ static int __init qman_debugfs_module_in
- 
- 	fqid_max = 0;
- 	init_ccsrmempeek();
--	if (qman_ccsr_start) {
--		if (!qman_ccsrmempeek(&reg, QM_FQD_AR)) {
--			/* extract the size of the FQD window */
--			reg = reg & 0x3f;
--			/* calculate valid frame queue descriptor range */
--			fqid_max = (1 << (reg + 1)) / QM_FQD_BLOCK_SIZE;
--		}
-+	if (!qman_ccsr_start) {
-+		/* No QMan node found in device tree */
-+		return 0;
-+	}
-+
-+	if (!qman_ccsrmempeek(&reg, QM_FQD_AR)) {
-+		/* extract the size of the FQD window */
-+		reg = reg & 0x3f;
-+		/* calculate valid frame queue descriptor range */
-+		fqid_max = (1 << (reg + 1)) / QM_FQD_BLOCK_SIZE;
- 	}
- 	dfs_root = debugfs_create_dir("qman", NULL);
- 	fqd_root = debugfs_create_dir("fqd", dfs_root);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0407-LF-924-net-enetc-Set-MAC-Rx-FIFO-to-recommended-valu.patch b/target/linux/layerscape/patches-5.4/701-net-0407-LF-924-net-enetc-Set-MAC-Rx-FIFO-to-recommended-valu.patch
deleted file mode 100644
index e381dda7cc..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0407-LF-924-net-enetc-Set-MAC-Rx-FIFO-to-recommended-valu.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 9507f517ac4080627515c31c937f45a4a58ccbe4 Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Fri, 14 Feb 2020 17:28:26 +0000
-Subject: [PATCH] LF-924: net/enetc: Set MAC Rx FIFO to recommended value
-
-On LS1028A the MAC Rx FIFO defaults to value 2, which is too high and may
-lead to Rx lock-up under traffic.  Set it to 1 instead, as recommended by
-the hardware team.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
-Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
-Acked-by: Jason Liu <jason.hui.liu@nxp.com>
----
- drivers/net/ethernet/freescale/enetc/enetc_hw.h | 2 ++
- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 6 ++++++
- 2 files changed, 8 insertions(+)
-
---- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
-@@ -226,6 +226,8 @@ enum enetc_bdr_type {TX, RX};
- #define ENETC_PM0_MAXFRM	0x8014
- #define ENETC_SET_TX_MTU(val)	((val) << 16)
- #define ENETC_SET_MAXFRM(val)	((val) & 0xffff)
-+#define ENETC_PM0_RX_FIFO	0x801c
-+#define ENETC_PM0_RX_FIFO_VAL	1
- 
- #define ENETC_PM_IMDIO_BASE	0x8030
- /* PCS registers */
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-@@ -536,6 +536,12 @@ static void enetc_configure_port_mac(str
- 		enetc_port_wr(hw, ENETC_PM0_IF_MODE, ENETC_PM0_IFM_XGMII);
- 		enetc_port_wr(hw, ENETC_PM1_IF_MODE, ENETC_PM0_IFM_XGMII);
- 	}
-+
-+	/* on LS1028A the MAC Rx FIFO defaults to value 2, which is too high and
-+	 * may lead to Rx lock-up under traffic.  Set it to 1 instead, as
-+	 * recommended by the hardware team.
-+	 */
-+	enetc_port_wr(hw, ENETC_PM0_RX_FIFO, ENETC_PM0_RX_FIFO_VAL);
- }
- 
- static void enetc_configure_port_pmac(struct enetc_hw *hw)
diff --git a/target/linux/layerscape/patches-5.4/701-net-0408-sdk_fman-fix-CONFIG_COMPAT-leak-during-headers-insta.patch b/target/linux/layerscape/patches-5.4/701-net-0408-sdk_fman-fix-CONFIG_COMPAT-leak-during-headers-insta.patch
deleted file mode 100644
index bff431c52d..0000000000
--- a/target/linux/layerscape/patches-5.4/701-net-0408-sdk_fman-fix-CONFIG_COMPAT-leak-during-headers-insta.patch
+++ /dev/null
@@ -1,516 +0,0 @@
-From 7837219f354524f6c2c9332a6a5aa616c28f53a9 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Thu, 20 Aug 2020 18:38:49 +0800
-Subject: [PATCH] sdk_fman: fix CONFIG_COMPAT leak during headers installing
-
-This patch is to fix CONFIG_COMPAT leak during headers installing
-by replacing CONFIG_COMPAT kernel option with FM_COMPAT instead.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- .../net/ethernet/freescale/sdk_fman/ncsw_config.mk |  5 ++
- include/uapi/linux/fmd/Peripherals/fm_ioctls.h     | 16 ++---
- include/uapi/linux/fmd/Peripherals/fm_pcd_ioctls.h | 72 +++++++++++-----------
- .../uapi/linux/fmd/Peripherals/fm_port_ioctls.h    | 14 ++---
- .../uapi/linux/fmd/Peripherals/fm_test_ioctls.h    |  4 +-
- 5 files changed, 58 insertions(+), 53 deletions(-)
-
---- a/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-+++ b/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk
-@@ -44,6 +44,11 @@ ifdef CONFIG_FMAN_ARM
- ccflags-y += -I$(FMAN)/inc/integrations/LS1043
- endif
- 
-+# FM_COMPAT is used in kernel headers in case of kernel option leaking
-+ifeq ("$(CONFIG_COMPAT)", "y")
-+ccflags-y += -DFM_COMPAT
-+endif
-+
- ccflags-y += -I$(FMAN)/src/inc
- ccflags-y += -I$(FMAN)/src/inc/system
- ccflags-y += -I$(FMAN)/src/inc/wrapper
---- a/include/uapi/linux/fmd/Peripherals/fm_ioctls.h
-+++ b/include/uapi/linux/fmd/Peripherals/fm_ioctls.h
-@@ -434,7 +434,7 @@ typedef struct ioc_fm_ctrl_mon_counters_
- 
-  @Retval        Handle to FM VSP object, or NULL for Failure.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_IOC_VSP_CONFIG_COMPAT                             _IOWR(FM_IOC_TYPE_BASE, FM_IOC_NUM(8), ioc_compat_fm_vsp_params_t)
- #endif
- #define FM_IOC_VSP_CONFIG                                    _IOWR(FM_IOC_TYPE_BASE, FM_IOC_NUM(8), ioc_fm_vsp_params_t)
-@@ -448,7 +448,7 @@ typedef struct ioc_fm_ctrl_mon_counters_
- 
-  @Return        E_OK on success; Error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_IOC_VSP_INIT_COMPAT                               _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(9), ioc_compat_fm_obj_t)
- #endif
- #define FM_IOC_VSP_INIT                                      _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(9), ioc_fm_obj_t)
-@@ -464,7 +464,7 @@ typedef struct ioc_fm_ctrl_mon_counters_
- 
-  @Return        E_OK on success; Error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_IOC_VSP_FREE_COMPAT                               _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(10), ioc_compat_fm_obj_t)
- #endif
- #define FM_IOC_VSP_FREE                                      _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(10), ioc_fm_obj_t)
-@@ -482,7 +482,7 @@ typedef struct ioc_fm_ctrl_mon_counters_
- 
-  @Cautions      Allowed only following FM_VSP_Config() and before FM_VSP_Init().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_IOC_VSP_CONFIG_POOL_DEPLETION_COMPAT              _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(11), ioc_compat_fm_buf_pool_depletion_params_t)
- #endif
- #define FM_IOC_VSP_CONFIG_POOL_DEPLETION                     _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(11), ioc_fm_buf_pool_depletion_params_t)
-@@ -512,7 +512,7 @@ typedef struct ioc_fm_ctrl_mon_counters_
- 
-  @Cautions      Allowed only following FM_VSP_Config() and before FM_VSP_Init().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_IOC_VSP_CONFIG_BUFFER_PREFIX_CONTENT_COMPAT       _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(12), ioc_compat_fm_buffer_prefix_content_params_t)
- #endif
- #define FM_IOC_VSP_CONFIG_BUFFER_PREFIX_CONTENT              _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(12), ioc_fm_buffer_prefix_content_params_t)
-@@ -530,7 +530,7 @@ typedef struct ioc_fm_ctrl_mon_counters_
- 
-  @Cautions      Allowed only following FM_VSP_Config() and before FM_VSP_Init().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_IOC_VSP_CONFIG_NO_SG_COMPAT                     _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(13), ioc_compat_fm_vsp_config_no_sg_params_t)
- #endif
- #define FM_IOC_VSP_CONFIG_NO_SG                            _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(13), ioc_fm_vsp_config_no_sg_params_t)
-@@ -554,7 +554,7 @@ typedef struct ioc_fm_ctrl_mon_counters_
- 
-  @Cautions      Allowed only following FM_VSP_Init().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_IOC_VSP_GET_BUFFER_PRS_RESULT_COMPAT            _IOWR(FM_IOC_TYPE_BASE, FM_IOC_NUM(14), ioc_compat_fm_vsp_prs_result_params_t)
- #endif
- #define FM_IOC_VSP_GET_BUFFER_PRS_RESULT                   _IOWR(FM_IOC_TYPE_BASE, FM_IOC_NUM(14), ioc_fm_vsp_prs_result_params_t)
-@@ -612,7 +612,7 @@ typedef struct ioc_fm_ctrl_mon_counters_
- 
-  @Cautions      Allowed only following FM_Init().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_IOC_CTRL_MON_GET_COUNTERS_COMPAT                _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(17), ioc_compat_fm_ctrl_mon_counters_params_t)
- #endif
- #define FM_IOC_CTRL_MON_GET_COUNTERS                       _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(17), ioc_fm_ctrl_mon_counters_params_t)
---- a/include/uapi/linux/fmd/Peripherals/fm_pcd_ioctls.h
-+++ b/include/uapi/linux/fmd/Peripherals/fm_pcd_ioctls.h
-@@ -312,7 +312,7 @@ typedef struct ioc_fm_pcd_kg_dflt_value_
- 
-  @Cautions      Allowed only when PCD is disabled.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_PRS_LOAD_SW_COMPAT  _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(3), ioc_compat_fm_pcd_prs_sw_params_t)
- #endif
- #define FM_PCD_IOC_PRS_LOAD_SW  _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(3), ioc_fm_pcd_prs_sw_params_t)
-@@ -385,7 +385,7 @@ typedef struct ioc_fm_pcd_kg_dflt_value_
- 
-  @Cautions      Allowed only following FM_PCD_Init() & FM_PCD_KgSchemeSet().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_KG_SCHEME_GET_CNTR_COMPAT  _IOR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(4), ioc_compat_fm_pcd_kg_scheme_spc_t)
- #endif
- #define FM_PCD_IOC_KG_SCHEME_GET_CNTR  _IOR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(4), ioc_fm_pcd_kg_scheme_spc_t)
-@@ -2413,7 +2413,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
-  @Cautions      Allowed only following FM_PCD_MatchTableSet().
- *//***************************************************************************/
- 
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_MATCH_TABLE_GET_KEY_STAT_COMPAT   _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(12), ioc_compat_fm_pcd_cc_tbl_get_stats_t)
- #endif
- #define FM_PCD_IOC_MATCH_TABLE_GET_KEY_STAT  _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(12), ioc_fm_pcd_cc_tbl_get_stats_t)
-@@ -2439,7 +2439,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
-  @Cautions      Allowed only following FM_PCD_MatchTableSet().
- *//***************************************************************************/
- 
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_MATCH_TABLE_GET_MISS_STAT_COMPAT   _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(13), ioc_compat_fm_pcd_cc_tbl_get_stats_t)
- #endif
- #define FM_PCD_IOC_MATCH_TABLE_GET_MISS_STAT  _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(13), ioc_fm_pcd_cc_tbl_get_stats_t)
-@@ -2463,7 +2463,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
-  @Cautions      Allowed only following FM_PCD_HashTableSet().
- *//***************************************************************************/
- 
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_HASH_TABLE_GET_MISS_STAT_COMPAT   _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(14), ioc_compat_fm_pcd_cc_tbl_get_stats_t)
- #endif
- #define FM_PCD_IOC_HASH_TABLE_GET_MISS_STAT  _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(14), ioc_fm_pcd_cc_tbl_get_stats_t)
-@@ -2511,7 +2511,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Return        0 on success; Error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET_COMPAT   _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(20), ioc_compat_fm_pcd_net_env_params_t)
- #endif
- #define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET  _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(20), ioc_fm_pcd_net_env_params_t)
-@@ -2525,7 +2525,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Return        0 on success; Error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE_COMPAT  _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(21), ioc_compat_fm_obj_t)
- #endif
- #define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(21), ioc_fm_obj_t)
-@@ -2544,7 +2544,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Return        0 on success; Error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_KG_SCHEME_SET_COMPAT     _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(24), ioc_compat_fm_pcd_kg_scheme_params_t)
- #endif
- #define FM_PCD_IOC_KG_SCHEME_SET    _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(24), ioc_fm_pcd_kg_scheme_params_t)
-@@ -2558,7 +2558,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Return        0 on success; Error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_KG_SCHEME_DELETE_COMPAT  _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(25), ioc_compat_fm_obj_t)
- #endif
- #define FM_PCD_IOC_KG_SCHEME_DELETE     _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(25), ioc_fm_obj_t)
-@@ -2575,7 +2575,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Return        0 on success; Error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_CC_ROOT_BUILD_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(26), compat_uptr_t)
- #endif
- #define FM_PCD_IOC_CC_ROOT_BUILD    _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(26), void *) /* workaround ...*/
-@@ -2587,7 +2587,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Param[in]     ioc_fm_obj_t - The id of a CC tree.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_CC_ROOT_DELETE_COMPAT    _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(27), ioc_compat_fm_obj_t)
- #endif
- #define FM_PCD_IOC_CC_ROOT_DELETE    _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(27), ioc_fm_obj_t)
-@@ -2604,7 +2604,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Return        0 on success; Error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_MATCH_TABLE_SET_COMPAT    _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(28), compat_uptr_t)
- #endif
- #define FM_PCD_IOC_MATCH_TABLE_SET    _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(28), void *) /* workaround ...*/
-@@ -2618,7 +2618,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Return        0 on success; Error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_MATCH_TABLE_DELETE_COMPAT    _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(29), ioc_compat_fm_obj_t)
- #endif
- #define FM_PCD_IOC_MATCH_TABLE_DELETE   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(29), ioc_fm_obj_t)
-@@ -2634,7 +2634,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Cautions      Allowed only following FM_PCD_CcRootBuild().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_CC_ROOT_MODIFY_NEXT_ENGINE_COMPAT   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(30), ioc_compat_fm_pcd_cc_tree_modify_next_engine_params_t)
- #endif
- #define FM_PCD_IOC_CC_ROOT_MODIFY_NEXT_ENGINE   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(30), ioc_fm_pcd_cc_tree_modify_next_engine_params_t)
-@@ -2650,7 +2650,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Cautions      Allowed only following FM_PCD_MatchTableSet().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_MATCH_TABLE_MODIFY_NEXT_ENGINE_COMPAT   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(31), ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t)
- #endif
- #define FM_PCD_IOC_MATCH_TABLE_MODIFY_NEXT_ENGINE   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(31), ioc_fm_pcd_cc_node_modify_next_engine_params_t)
-@@ -2666,7 +2666,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Cautions      Allowed only following FM_PCD_MatchTableSet().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_MATCH_TABLE_MODIFY_MISS_NEXT_ENGINE_COMPAT   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(32), ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t)
- #endif
- #define FM_PCD_IOC_MATCH_TABLE_MODIFY_MISS_NEXT_ENGINE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(32), ioc_fm_pcd_cc_node_modify_next_engine_params_t)
-@@ -2684,7 +2684,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
-  @Cautions      Allowed only after FM_PCD_MatchTableSet() has been called for this
-                 node and for all of the nodes that lead to it.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_MATCH_TABLE_REMOVE_KEY_COMPAT    _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(33), ioc_compat_fm_pcd_cc_node_remove_key_params_t)
- #endif
- #define FM_PCD_IOC_MATCH_TABLE_REMOVE_KEY   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(33), ioc_fm_pcd_cc_node_remove_key_params_t)
-@@ -2705,7 +2705,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
-  @Cautions      Allowed only after FM_PCD_MatchTableSet() has been called for this
-                 node and for all of the nodes that lead to it.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_MATCH_TABLE_ADD_KEY_COMPAT   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(34), ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
- #endif
- #define FM_PCD_IOC_MATCH_TABLE_ADD_KEY  _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(34), ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
-@@ -2722,7 +2722,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
-  @Cautions      Allowed only following FM_PCD_MatchTableSet() not only of the relevnt node but also
-                 the node that points to this node
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_AND_NEXT_ENGINE_COMPAT    _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(35), ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
- #endif
- #define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_AND_NEXT_ENGINE   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(35), ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
-@@ -2739,7 +2739,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
-  @Cautions      Allowed only after FM_PCD_MatchTableSet() has been called for this
-                 node and for all of the nodes that lead to it.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_COMPAT    _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(36), ioc_compat_fm_pcd_cc_node_modify_key_params_t)
- #endif
- #define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(36), ioc_fm_pcd_cc_node_modify_key_params_t)
-@@ -2766,7 +2766,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Return        0 on success; Error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_HASH_TABLE_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_compat_fm_pcd_hash_table_params_t)
- #endif
- #define FM_PCD_IOC_HASH_TABLE_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_fm_pcd_hash_table_params_t)
-@@ -2784,7 +2784,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Cautions      Allowed only following FM_PCD_HashTableSet().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_HASH_TABLE_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_compat_fm_obj_t)
- #endif
- #define FM_PCD_IOC_HASH_TABLE_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_fm_obj_t)
-@@ -2803,7 +2803,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Cautions      Allowed only following FM_PCD_HashTableSet().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_HASH_TABLE_ADD_KEY_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(39), ioc_compat_fm_pcd_hash_table_add_key_params_t)
- #endif
- #define FM_PCD_IOC_HASH_TABLE_ADD_KEY _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(39), ioc_fm_pcd_hash_table_add_key_params_t)
-@@ -2820,7 +2820,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Cautions      Allowed only following FM_PCD_HashTableSet().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_HASH_TABLE_REMOVE_KEY_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(40), ioc_compat_fm_pcd_hash_table_remove_key_params_t)
- #endif
- #define FM_PCD_IOC_HASH_TABLE_REMOVE_KEY _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(40), ioc_fm_pcd_hash_table_remove_key_params_t)
-@@ -2836,7 +2836,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Return        0 on success; Error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_PLCR_PROFILE_SET_COMPAT     _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_compat_fm_pcd_plcr_profile_params_t)
- #endif
- #define FM_PCD_IOC_PLCR_PROFILE_SET     _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_fm_pcd_plcr_profile_params_t)
-@@ -2851,7 +2851,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Return        0 on success; Error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_PLCR_PROFILE_DELETE_COMPAT   _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_compat_fm_obj_t)
- #endif
- #define FM_PCD_IOC_PLCR_PROFILE_DELETE  _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_fm_obj_t)
-@@ -2867,7 +2867,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Return        A handle to the initialized object on success; NULL code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_MANIP_NODE_SET_COMPAT    _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(43), ioc_compat_fm_pcd_manip_params_t)
- #endif
- #define FM_PCD_IOC_MANIP_NODE_SET   _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(43), ioc_fm_pcd_manip_params_t)
-@@ -2887,7 +2887,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Cautions      Allowed only following FM_PCD_ManipNodeSet().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_MANIP_NODE_REPLACE_COMPAT    FM_PCD_IOC_MANIP_NODE_SET_COMPAT
- #endif
- #define FM_PCD_IOC_MANIP_NODE_REPLACE           FM_PCD_IOC_MANIP_NODE_SET
-@@ -2903,7 +2903,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Cautions      Allowed only following FM_PCD_ManipNodeSet().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_MANIP_NODE_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(44), ioc_compat_fm_obj_t)
- #endif
- #define FM_PCD_IOC_MANIP_NODE_DELETE    _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(44), ioc_fm_obj_t)
-@@ -2920,7 +2920,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Cautions      Allowed only following FM_PCD_ManipNodeSet().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_MANIP_GET_STATS_COMPAT  _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(50), ioc_compat_fm_pcd_manip_get_stats_t)
- #endif
- #define FM_PCD_IOC_MANIP_GET_STATS   _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(50), ioc_fm_pcd_manip_get_stats_t)
-@@ -2953,7 +2953,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Cautions      Allowed only following FM_PCD_Init().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_FRM_REPLIC_GROUP_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(46), ioc_compat_fm_pcd_frm_replic_group_params_t)
- #endif
- #define FM_PCD_IOC_FRM_REPLIC_GROUP_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(46), ioc_fm_pcd_frm_replic_group_params_t)
-@@ -2969,7 +2969,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Cautions      Allowed only following FM_PCD_FrmReplicSetGroup().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_FRM_REPLIC_GROUP_DELETE_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(47), ioc_compat_fm_obj_t)
- #endif
- #define FM_PCD_IOC_FRM_REPLIC_GROUP_DELETE _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(47), ioc_fm_obj_t)
-@@ -2987,7 +2987,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Cautions      Allowed only following FM_PCD_FrmReplicSetGroup() of this group.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_FRM_REPLIC_MEMBER_ADD_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(48), ioc_compat_fm_pcd_frm_replic_member_params_t)
- #endif
- #define FM_PCD_IOC_FRM_REPLIC_MEMBER_ADD _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(48), ioc_fm_pcd_frm_replic_member_params_t)
-@@ -3004,7 +3004,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Cautions      Allowed only following FM_PCD_FrmReplicSetGroup() of this group.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_FRM_REPLIC_MEMBER_REMOVE_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(49), ioc_compat_fm_pcd_frm_replic_member_t)
- #endif
- #define FM_PCD_IOC_FRM_REPLIC_MEMBER_REMOVE _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(49), ioc_fm_pcd_frm_replic_member_t)
-@@ -3021,7 +3021,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- 
-  @Return        0 on success; Error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_STATISTICS_SET_NODE_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(45), void *)
- #endif
- #define FM_PCD_IOC_STATISTICS_SET_NODE _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(45), void *)
-@@ -3029,7 +3029,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta
- #endif /* FM_CAPWAP_SUPPORT */
- 
- #ifdef NCSW_BACKWARD_COMPATIBLE_API
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PCD_IOC_SET_NET_ENV_CHARACTERISTICS_COMPAT \
-                                                 FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET_COMPAT
- #define FM_PCD_IOC_DELETE_NET_ENV_CHARACTERISTICS_COMPAT \
---- a/include/uapi/linux/fmd/Peripherals/fm_port_ioctls.h
-+++ b/include/uapi/linux/fmd/Peripherals/fm_port_ioctls.h
-@@ -589,7 +589,7 @@ typedef struct ioc_fm_port_pcd_fqids_par
- 
-  @Return        0 on success; error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PORT_IOC_SET_PCD_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(20), ioc_compat_fm_port_pcd_params_t)
- #endif
- #define FM_PORT_IOC_SET_PCD _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(20), ioc_fm_port_pcd_params_t)
-@@ -674,7 +674,7 @@ typedef struct ioc_fm_port_pcd_fqids_par
- 
-  @Return        0 on success; error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PORT_IOC_PCD_KG_MODIFY_INITIAL_SCHEME_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(26), ioc_compat_fm_pcd_kg_scheme_select_t)
- #endif
- #define FM_PORT_IOC_PCD_KG_MODIFY_INITIAL_SCHEME _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(26), ioc_fm_pcd_kg_scheme_select_t)
-@@ -691,7 +691,7 @@ typedef struct ioc_fm_port_pcd_fqids_par
- 
-  @Return        0 on success; error code otherwise.
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PORT_IOC_PCD_PLCR_MODIFY_INITIAL_PROFILE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(27), ioc_compat_fm_obj_t)
- #endif
- #define FM_PORT_IOC_PCD_PLCR_MODIFY_INITIAL_PROFILE _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(27), ioc_fm_obj_t)
-@@ -708,7 +708,7 @@ typedef struct ioc_fm_port_pcd_fqids_par
- 
-  @Cautions      Allowed only following FM_PORT_SetPCD() and FM_PORT_DetachPCD()
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PORT_IOC_PCD_CC_MODIFY_TREE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(28), ioc_compat_fm_obj_t)
- #endif
- #define FM_PORT_IOC_PCD_CC_MODIFY_TREE _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(28), ioc_fm_obj_t)
-@@ -726,7 +726,7 @@ typedef struct ioc_fm_port_pcd_fqids_par
- 
-  @Cautions      Allowed only following FM_PORT_SetPCD().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PORT_IOC_PCD_KG_BIND_SCHEMES_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(30), ioc_compat_fm_pcd_port_schemes_params_t)
- #endif
- #define FM_PORT_IOC_PCD_KG_BIND_SCHEMES _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(30), ioc_fm_pcd_port_schemes_params_t)
-@@ -744,7 +744,7 @@ typedef struct ioc_fm_port_pcd_fqids_par
- 
-  @Cautions      Allowed only following FM_PORT_SetPCD().
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PORT_IOC_PCD_KG_UNBIND_SCHEMES_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(31), ioc_compat_fm_pcd_port_schemes_params_t)
- #endif
- #define FM_PORT_IOC_PCD_KG_UNBIND_SCHEMES _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(31), ioc_fm_pcd_port_schemes_params_t)
-@@ -917,7 +917,7 @@ typedef struct ioc_fm_port_vsp_alloc_par
-  @Cautions      Allowed only following FM_PORT_Init(), and before FM_PORT_SetPCD()
-                 and also before FM_PORT_Enable() (i.e. the port should be disabled).
- *//***************************************************************************/
--#if defined(CONFIG_COMPAT)
-+#if defined(FM_COMPAT)
- #define FM_PORT_IOC_VSP_ALLOC_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(38), ioc_compat_fm_port_vsp_alloc_params_t)
- #endif
- #define FM_PORT_IOC_VSP_ALLOC _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(38), ioc_fm_port_vsp_alloc_params_t)
---- a/include/uapi/linux/fmd/Peripherals/fm_test_ioctls.h
-+++ b/include/uapi/linux/fmd/Peripherals/fm_test_ioctls.h
-@@ -90,7 +90,7 @@ typedef struct ioc_fmt_buff_context_t {
-     uint8_t         fm_time_stamp[FM_TIME_STAMP_MAX];
- } ioc_fmt_buff_context_t;
- 
--#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
-+#if defined(__KERNEL__) && defined(FM_COMPAT)
- typedef struct ioc_fmt_compat_buff_context_t {
-     compat_uptr_t         p_user_priv;
-     uint8_t               fm_prs_res[FM_PRS_MAX];
-@@ -109,7 +109,7 @@ typedef struct ioc_fmt_buff_desc_t {
-     ioc_fmt_buff_context_t buff_context;
- } ioc_fmt_buff_desc_t;
- 
--#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
-+#if defined(__KERNEL__) && defined(FM_COMPAT)
- typedef struct ioc_fmt_compat_buff_desc_t {
-     uint32_t                qid;
-     compat_uptr_t           p_data;
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0001-Revert-ASoC-fsl_sai-Fix-noise-when-using-EDMA.patch b/target/linux/layerscape/patches-5.4/801-audio-0001-Revert-ASoC-fsl_sai-Fix-noise-when-using-EDMA.patch
deleted file mode 100644
index 98c9214eaf..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0001-Revert-ASoC-fsl_sai-Fix-noise-when-using-EDMA.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From cf07127ea019b78f7ea5e009d494e2bd0bd475fa Mon Sep 17 00:00:00 2001
-From: Leonard Crestez <leonard.crestez@nxp.com>
-Date: Thu, 3 Oct 2019 20:44:56 +0300
-Subject: [PATCH] Revert "ASoC: fsl_sai: Fix noise when using EDMA"
-
-This reverts commit e75f4940e8ad0dd76527302a10c06b58bf7eb590.
----
- sound/soc/fsl/fsl_sai.c | 15 ---------------
- sound/soc/fsl/fsl_sai.h |  1 -
- 2 files changed, 16 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -628,16 +628,6 @@ static int fsl_sai_startup(struct snd_pc
- 			   FSL_SAI_CR3_TRCE_MASK,
- 			   FSL_SAI_CR3_TRCE);
- 
--	/*
--	 * EDMA controller needs period size to be a multiple of
--	 * tx/rx maxburst
--	 */
--	if (sai->soc_data->use_edma)
--		snd_pcm_hw_constraint_step(substream->runtime, 0,
--					   SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
--					   tx ? sai->dma_params_tx.maxburst :
--					   sai->dma_params_rx.maxburst);
--
- 	ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
- 			SNDRV_PCM_HW_PARAM_RATE, &fsl_sai_rate_constraints);
- 
-@@ -1052,35 +1042,30 @@ static int fsl_sai_remove(struct platfor
- 
- static const struct fsl_sai_soc_data fsl_sai_vf610_data = {
- 	.use_imx_pcm = false,
--	.use_edma = false,
- 	.fifo_depth = 32,
- 	.reg_offset = 0,
- };
- 
- static const struct fsl_sai_soc_data fsl_sai_imx6sx_data = {
- 	.use_imx_pcm = true,
--	.use_edma = false,
- 	.fifo_depth = 32,
- 	.reg_offset = 0,
- };
- 
- static const struct fsl_sai_soc_data fsl_sai_imx7ulp_data = {
- 	.use_imx_pcm = true,
--	.use_edma = false,
- 	.fifo_depth = 16,
- 	.reg_offset = 8,
- };
- 
- static const struct fsl_sai_soc_data fsl_sai_imx8mq_data = {
- 	.use_imx_pcm = true,
--	.use_edma = false,
- 	.fifo_depth = 128,
- 	.reg_offset = 8,
- };
- 
- static const struct fsl_sai_soc_data fsl_sai_imx8qm_data = {
- 	.use_imx_pcm = true,
--	.use_edma = true,
- 	.fifo_depth = 64,
- 	.reg_offset = 0,
- };
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -157,7 +157,6 @@
- 
- struct fsl_sai_soc_data {
- 	bool use_imx_pcm;
--	bool use_edma;
- 	unsigned int fifo_depth;
- 	unsigned int reg_offset;
- };
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0002-Revert-ASoC-fsl_sai-Implement-set_bclk_ratio.patch b/target/linux/layerscape/patches-5.4/801-audio-0002-Revert-ASoC-fsl_sai-Implement-set_bclk_ratio.patch
deleted file mode 100644
index 60e3e3e853..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0002-Revert-ASoC-fsl_sai-Implement-set_bclk_ratio.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From aff2edb9c66a1188ed6554643e3cf76595c56846 Mon Sep 17 00:00:00 2001
-From: Leonard Crestez <leonard.crestez@nxp.com>
-Date: Thu, 3 Oct 2019 20:44:59 +0300
-Subject: [PATCH] Revert "ASoC: fsl_sai: Implement set_bclk_ratio"
-
-This reverts commit 63d1a3488ff58e094a7f517cf93c0250f0a3f6be.
----
- sound/soc/fsl/fsl_sai.c | 21 ++-------------------
- sound/soc/fsl/fsl_sai.h |  1 -
- 2 files changed, 2 insertions(+), 20 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -137,16 +137,6 @@ static int fsl_sai_set_dai_tdm_slot(stru
- 	return 0;
- }
- 
--static int fsl_sai_set_dai_bclk_ratio(struct snd_soc_dai *dai,
--				      unsigned int ratio)
--{
--	struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai);
--
--	sai->bclk_ratio = ratio;
--
--	return 0;
--}
--
- static int fsl_sai_set_dai_sysclk_tr(struct snd_soc_dai *cpu_dai,
- 		int clk_id, unsigned int freq, int fsl_dir)
- {
-@@ -433,14 +423,8 @@ static int fsl_sai_hw_params(struct snd_
- 		slot_width = sai->slot_width;
- 
- 	if (!sai->is_slave_mode) {
--		if (sai->bclk_ratio)
--			ret = fsl_sai_set_bclk(cpu_dai, tx,
--					       sai->bclk_ratio *
--					       params_rate(params));
--		else
--			ret = fsl_sai_set_bclk(cpu_dai, tx,
--					       slots * slot_width *
--					       params_rate(params));
-+		ret = fsl_sai_set_bclk(cpu_dai, tx,
-+				slots * slot_width * params_rate(params));
- 		if (ret)
- 			return ret;
- 
-@@ -646,7 +630,6 @@ static void fsl_sai_shutdown(struct snd_
- }
- 
- static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
--	.set_bclk_ratio	= fsl_sai_set_dai_bclk_ratio,
- 	.set_sysclk	= fsl_sai_set_dai_sysclk,
- 	.set_fmt	= fsl_sai_set_dai_fmt,
- 	.set_tdm_slot	= fsl_sai_set_dai_tdm_slot,
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -176,7 +176,6 @@ struct fsl_sai {
- 	unsigned int mclk_streams;
- 	unsigned int slots;
- 	unsigned int slot_width;
--	unsigned int bclk_ratio;
- 
- 	const struct fsl_sai_soc_data *soc_data;
- 	struct snd_soc_dai_driver cpu_dai_drv;
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0003-Revert-ASoC-fsl_sai-Add-support-for-imx8qm.patch b/target/linux/layerscape/patches-5.4/801-audio-0003-Revert-ASoC-fsl_sai-Add-support-for-imx8qm.patch
deleted file mode 100644
index 1fe6c649dc..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0003-Revert-ASoC-fsl_sai-Add-support-for-imx8qm.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 841e80ea4dcfa52f6883ad5330aa7d2ab7d6229e Mon Sep 17 00:00:00 2001
-From: Leonard Crestez <leonard.crestez@nxp.com>
-Date: Thu, 3 Oct 2019 20:45:02 +0300
-Subject: [PATCH] Revert "ASoC: fsl_sai: Add support for imx8qm"
-
-This reverts commit 6eeb60be5ebb73b2e5911e26fb1aed02940b7d09.
----
- sound/soc/fsl/fsl_sai.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -1047,19 +1047,12 @@ static const struct fsl_sai_soc_data fsl
- 	.reg_offset = 8,
- };
- 
--static const struct fsl_sai_soc_data fsl_sai_imx8qm_data = {
--	.use_imx_pcm = true,
--	.fifo_depth = 64,
--	.reg_offset = 0,
--};
--
- static const struct of_device_id fsl_sai_ids[] = {
- 	{ .compatible = "fsl,vf610-sai", .data = &fsl_sai_vf610_data },
- 	{ .compatible = "fsl,imx6sx-sai", .data = &fsl_sai_imx6sx_data },
- 	{ .compatible = "fsl,imx6ul-sai", .data = &fsl_sai_imx6sx_data },
- 	{ .compatible = "fsl,imx7ulp-sai", .data = &fsl_sai_imx7ulp_data },
- 	{ .compatible = "fsl,imx8mq-sai", .data = &fsl_sai_imx8mq_data },
--	{ .compatible = "fsl,imx8qm-sai", .data = &fsl_sai_imx8qm_data },
- 	{ /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, fsl_sai_ids);
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0004-Revert-ASoC-fsl_sai-Add-support-for-imx7ulp-imx8mq.patch b/target/linux/layerscape/patches-5.4/801-audio-0004-Revert-ASoC-fsl_sai-Add-support-for-imx7ulp-imx8mq.patch
deleted file mode 100644
index f08d8e0e38..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0004-Revert-ASoC-fsl_sai-Add-support-for-imx7ulp-imx8mq.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 6357cf1832f46d29f9756a34887af7fd96d48f18 Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Fri, 16 Aug 2019 18:01:12 +0800
-Subject: [PATCH] Revert "ASoC: fsl_sai: Add support for imx7ulp/imx8mq"
-
-This reverts commit a860fac420971c5a90d4f78959b44ead793aee4f.
----
- sound/soc/fsl/fsl_sai.c | 14 --------------
- 1 file changed, 14 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -1035,24 +1035,10 @@ static const struct fsl_sai_soc_data fsl
- 	.reg_offset = 0,
- };
- 
--static const struct fsl_sai_soc_data fsl_sai_imx7ulp_data = {
--	.use_imx_pcm = true,
--	.fifo_depth = 16,
--	.reg_offset = 8,
--};
--
--static const struct fsl_sai_soc_data fsl_sai_imx8mq_data = {
--	.use_imx_pcm = true,
--	.fifo_depth = 128,
--	.reg_offset = 8,
--};
--
- static const struct of_device_id fsl_sai_ids[] = {
- 	{ .compatible = "fsl,vf610-sai", .data = &fsl_sai_vf610_data },
- 	{ .compatible = "fsl,imx6sx-sai", .data = &fsl_sai_imx6sx_data },
- 	{ .compatible = "fsl,imx6ul-sai", .data = &fsl_sai_imx6sx_data },
--	{ .compatible = "fsl,imx7ulp-sai", .data = &fsl_sai_imx7ulp_data },
--	{ .compatible = "fsl,imx8mq-sai", .data = &fsl_sai_imx8mq_data },
- 	{ /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, fsl_sai_ids);
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0005-Revert-ASoC-fsl_sai-Add-support-for-SAI-new-version.patch b/target/linux/layerscape/patches-5.4/801-audio-0005-Revert-ASoC-fsl_sai-Add-support-for-SAI-new-version.patch
deleted file mode 100644
index 86ea031740..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0005-Revert-ASoC-fsl_sai-Add-support-for-SAI-new-version.patch
+++ /dev/null
@@ -1,605 +0,0 @@
-From 2d6dfbd200d8de9bef8fb30bec90594acea9a145 Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Fri, 16 Aug 2019 18:01:26 +0800
-Subject: [PATCH] Revert "ASoC: fsl_sai: Add support for SAI new version"
-
-This reverts commit 4f7a0728b5305e2d865f543fbcffd617e03c7674.
----
- sound/soc/fsl/fsl_sai.c | 228 ++++++++++++++++++++----------------------------
- sound/soc/fsl/fsl_sai.h |  41 +++++----
- 2 files changed, 113 insertions(+), 156 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -40,7 +40,6 @@ static const struct snd_pcm_hw_constrain
- static irqreturn_t fsl_sai_isr(int irq, void *devid)
- {
- 	struct fsl_sai *sai = (struct fsl_sai *)devid;
--	unsigned int ofs = sai->soc_data->reg_offset;
- 	struct device *dev = &sai->pdev->dev;
- 	u32 flags, xcsr, mask;
- 	bool irq_none = true;
-@@ -53,7 +52,7 @@ static irqreturn_t fsl_sai_isr(int irq,
- 	mask = (FSL_SAI_FLAGS >> FSL_SAI_CSR_xIE_SHIFT) << FSL_SAI_CSR_xF_SHIFT;
- 
- 	/* Tx IRQ */
--	regmap_read(sai->regmap, FSL_SAI_TCSR(ofs), &xcsr);
-+	regmap_read(sai->regmap, FSL_SAI_TCSR, &xcsr);
- 	flags = xcsr & mask;
- 
- 	if (flags)
-@@ -83,11 +82,11 @@ static irqreturn_t fsl_sai_isr(int irq,
- 	xcsr &= ~FSL_SAI_CSR_xF_MASK;
- 
- 	if (flags)
--		regmap_write(sai->regmap, FSL_SAI_TCSR(ofs), flags | xcsr);
-+		regmap_write(sai->regmap, FSL_SAI_TCSR, flags | xcsr);
- 
- irq_rx:
- 	/* Rx IRQ */
--	regmap_read(sai->regmap, FSL_SAI_RCSR(ofs), &xcsr);
-+	regmap_read(sai->regmap, FSL_SAI_RCSR, &xcsr);
- 	flags = xcsr & mask;
- 
- 	if (flags)
-@@ -117,7 +116,7 @@ irq_rx:
- 	xcsr &= ~FSL_SAI_CSR_xF_MASK;
- 
- 	if (flags)
--		regmap_write(sai->regmap, FSL_SAI_RCSR(ofs), flags | xcsr);
-+		regmap_write(sai->regmap, FSL_SAI_RCSR, flags | xcsr);
- 
- out:
- 	if (irq_none)
-@@ -141,7 +140,6 @@ static int fsl_sai_set_dai_sysclk_tr(str
- 		int clk_id, unsigned int freq, int fsl_dir)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
--	unsigned int ofs = sai->soc_data->reg_offset;
- 	bool tx = fsl_dir == FSL_FMT_TRANSMITTER;
- 	u32 val_cr2 = 0;
- 
-@@ -162,7 +160,7 @@ static int fsl_sai_set_dai_sysclk_tr(str
- 		return -EINVAL;
- 	}
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs),
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx),
- 			   FSL_SAI_CR2_MSEL_MASK, val_cr2);
- 
- 	return 0;
-@@ -195,7 +193,6 @@ static int fsl_sai_set_dai_fmt_tr(struct
- 				unsigned int fmt, int fsl_dir)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
--	unsigned int ofs = sai->soc_data->reg_offset;
- 	bool tx = fsl_dir == FSL_FMT_TRANSMITTER;
- 	u32 val_cr2 = 0, val_cr4 = 0;
- 
-@@ -290,9 +287,9 @@ static int fsl_sai_set_dai_fmt_tr(struct
- 		return -EINVAL;
- 	}
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs),
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx),
- 			   FSL_SAI_CR2_BCP | FSL_SAI_CR2_BCD_MSTR, val_cr2);
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
- 			   FSL_SAI_CR4_MF | FSL_SAI_CR4_FSE |
- 			   FSL_SAI_CR4_FSP | FSL_SAI_CR4_FSD_MSTR, val_cr4);
- 
-@@ -319,7 +316,6 @@ static int fsl_sai_set_dai_fmt(struct sn
- static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai);
--	unsigned int ofs = sai->soc_data->reg_offset;
- 	unsigned long clk_rate;
- 	u32 savediv = 0, ratio, savesub = freq;
- 	u32 id;
-@@ -382,17 +378,17 @@ static int fsl_sai_set_bclk(struct snd_s
- 	 */
- 	if ((sai->synchronous[TX] && !sai->synchronous[RX]) ||
- 	    (!tx && !sai->synchronous[RX])) {
--		regmap_update_bits(sai->regmap, FSL_SAI_RCR2(ofs),
-+		regmap_update_bits(sai->regmap, FSL_SAI_RCR2,
- 				   FSL_SAI_CR2_MSEL_MASK,
- 				   FSL_SAI_CR2_MSEL(sai->mclk_id[tx]));
--		regmap_update_bits(sai->regmap, FSL_SAI_RCR2(ofs),
-+		regmap_update_bits(sai->regmap, FSL_SAI_RCR2,
- 				   FSL_SAI_CR2_DIV_MASK, savediv - 1);
- 	} else if ((sai->synchronous[RX] && !sai->synchronous[TX]) ||
- 		   (tx && !sai->synchronous[TX])) {
--		regmap_update_bits(sai->regmap, FSL_SAI_TCR2(ofs),
-+		regmap_update_bits(sai->regmap, FSL_SAI_TCR2,
- 				   FSL_SAI_CR2_MSEL_MASK,
- 				   FSL_SAI_CR2_MSEL(sai->mclk_id[tx]));
--		regmap_update_bits(sai->regmap, FSL_SAI_TCR2(ofs),
-+		regmap_update_bits(sai->regmap, FSL_SAI_TCR2,
- 				   FSL_SAI_CR2_DIV_MASK, savediv - 1);
- 	}
- 
-@@ -407,7 +403,6 @@ static int fsl_sai_hw_params(struct snd_
- 		struct snd_soc_dai *cpu_dai)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
--	unsigned int ofs = sai->soc_data->reg_offset;
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 	unsigned int channels = params_channels(params);
- 	u32 word_width = params_width(params);
-@@ -460,19 +455,19 @@ static int fsl_sai_hw_params(struct snd_
- 
- 	if (!sai->is_slave_mode) {
- 		if (!sai->synchronous[TX] && sai->synchronous[RX] && !tx) {
--			regmap_update_bits(sai->regmap, FSL_SAI_TCR4(ofs),
-+			regmap_update_bits(sai->regmap, FSL_SAI_TCR4,
- 				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
- 				val_cr4);
--			regmap_update_bits(sai->regmap, FSL_SAI_TCR5(ofs),
-+			regmap_update_bits(sai->regmap, FSL_SAI_TCR5,
- 				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
- 				FSL_SAI_CR5_FBT_MASK, val_cr5);
- 			regmap_write(sai->regmap, FSL_SAI_TMR,
- 				~0UL - ((1 << channels) - 1));
- 		} else if (!sai->synchronous[RX] && sai->synchronous[TX] && tx) {
--			regmap_update_bits(sai->regmap, FSL_SAI_RCR4(ofs),
-+			regmap_update_bits(sai->regmap, FSL_SAI_RCR4,
- 				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
- 				val_cr4);
--			regmap_update_bits(sai->regmap, FSL_SAI_RCR5(ofs),
-+			regmap_update_bits(sai->regmap, FSL_SAI_RCR5,
- 				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
- 				FSL_SAI_CR5_FBT_MASK, val_cr5);
- 			regmap_write(sai->regmap, FSL_SAI_RMR,
-@@ -480,10 +475,10 @@ static int fsl_sai_hw_params(struct snd_
- 		}
- 	}
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
- 			   FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
- 			   val_cr4);
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx, ofs),
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx),
- 			   FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
- 			   FSL_SAI_CR5_FBT_MASK, val_cr5);
- 	regmap_write(sai->regmap, FSL_SAI_xMR(tx), ~0UL - ((1 << channels) - 1));
-@@ -511,8 +506,6 @@ static int fsl_sai_trigger(struct snd_pc
- 		struct snd_soc_dai *cpu_dai)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
--	unsigned int ofs = sai->soc_data->reg_offset;
--
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 	u32 xcsr, count = 100;
- 
-@@ -521,9 +514,9 @@ static int fsl_sai_trigger(struct snd_pc
- 	 * Rx sync with Tx clocks: Clear SYNC for Tx, set it for Rx.
- 	 * Tx sync with Rx clocks: Clear SYNC for Rx, set it for Tx.
- 	 */
--	regmap_update_bits(sai->regmap, FSL_SAI_TCR2(ofs), FSL_SAI_CR2_SYNC,
--			   sai->synchronous[TX] ? FSL_SAI_CR2_SYNC : 0);
--	regmap_update_bits(sai->regmap, FSL_SAI_RCR2(ofs), FSL_SAI_CR2_SYNC,
-+	regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC,
-+		           sai->synchronous[TX] ? FSL_SAI_CR2_SYNC : 0);
-+	regmap_update_bits(sai->regmap, FSL_SAI_RCR2, FSL_SAI_CR2_SYNC,
- 			   sai->synchronous[RX] ? FSL_SAI_CR2_SYNC : 0);
- 
- 	/*
-@@ -534,44 +527,43 @@ static int fsl_sai_trigger(struct snd_pc
- 	case SNDRV_PCM_TRIGGER_START:
- 	case SNDRV_PCM_TRIGGER_RESUME:
- 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
--		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
- 				   FSL_SAI_CSR_FRDE, FSL_SAI_CSR_FRDE);
- 
--		regmap_update_bits(sai->regmap, FSL_SAI_RCSR(ofs),
-+		regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
- 				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
--		regmap_update_bits(sai->regmap, FSL_SAI_TCSR(ofs),
-+		regmap_update_bits(sai->regmap, FSL_SAI_TCSR,
- 				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
- 
--		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
- 				   FSL_SAI_CSR_xIE_MASK, FSL_SAI_FLAGS);
- 		break;
- 	case SNDRV_PCM_TRIGGER_STOP:
- 	case SNDRV_PCM_TRIGGER_SUSPEND:
- 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
--		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
- 				   FSL_SAI_CSR_FRDE, 0);
--		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
- 				   FSL_SAI_CSR_xIE_MASK, 0);
- 
- 		/* Check if the opposite FRDE is also disabled */
--		regmap_read(sai->regmap, FSL_SAI_xCSR(!tx, ofs), &xcsr);
-+		regmap_read(sai->regmap, FSL_SAI_xCSR(!tx), &xcsr);
- 		if (!(xcsr & FSL_SAI_CSR_FRDE)) {
- 			/* Disable both directions and reset their FIFOs */
--			regmap_update_bits(sai->regmap, FSL_SAI_TCSR(ofs),
-+			regmap_update_bits(sai->regmap, FSL_SAI_TCSR,
- 					   FSL_SAI_CSR_TERE, 0);
--			regmap_update_bits(sai->regmap, FSL_SAI_RCSR(ofs),
-+			regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
- 					   FSL_SAI_CSR_TERE, 0);
- 
- 			/* TERE will remain set till the end of current frame */
- 			do {
- 				udelay(10);
--				regmap_read(sai->regmap,
--					    FSL_SAI_xCSR(tx, ofs), &xcsr);
-+				regmap_read(sai->regmap, FSL_SAI_xCSR(tx), &xcsr);
- 			} while (--count && xcsr & FSL_SAI_CSR_TERE);
- 
--			regmap_update_bits(sai->regmap, FSL_SAI_TCSR(ofs),
-+			regmap_update_bits(sai->regmap, FSL_SAI_TCSR,
- 					   FSL_SAI_CSR_FR, FSL_SAI_CSR_FR);
--			regmap_update_bits(sai->regmap, FSL_SAI_RCSR(ofs),
-+			regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
- 					   FSL_SAI_CSR_FR, FSL_SAI_CSR_FR);
- 
- 			/*
-@@ -583,13 +575,13 @@ static int fsl_sai_trigger(struct snd_pc
- 			 */
- 			if (!sai->is_slave_mode) {
- 				/* Software Reset for both Tx and Rx */
--				regmap_write(sai->regmap, FSL_SAI_TCSR(ofs),
--					     FSL_SAI_CSR_SR);
--				regmap_write(sai->regmap, FSL_SAI_RCSR(ofs),
--					     FSL_SAI_CSR_SR);
-+				regmap_write(sai->regmap,
-+					     FSL_SAI_TCSR, FSL_SAI_CSR_SR);
-+				regmap_write(sai->regmap,
-+					     FSL_SAI_RCSR, FSL_SAI_CSR_SR);
- 				/* Clear SR bit to finish the reset */
--				regmap_write(sai->regmap, FSL_SAI_TCSR(ofs), 0);
--				regmap_write(sai->regmap, FSL_SAI_RCSR(ofs), 0);
-+				regmap_write(sai->regmap, FSL_SAI_TCSR, 0);
-+				regmap_write(sai->regmap, FSL_SAI_RCSR, 0);
- 			}
- 		}
- 		break;
-@@ -604,11 +596,10 @@ static int fsl_sai_startup(struct snd_pc
- 		struct snd_soc_dai *cpu_dai)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
--	unsigned int ofs = sai->soc_data->reg_offset;
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 	int ret;
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, ofs),
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx),
- 			   FSL_SAI_CR3_TRCE_MASK,
- 			   FSL_SAI_CR3_TRCE);
- 
-@@ -622,10 +613,9 @@ static void fsl_sai_shutdown(struct snd_
- 		struct snd_soc_dai *cpu_dai)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
--	unsigned int ofs = sai->soc_data->reg_offset;
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, ofs),
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx),
- 			   FSL_SAI_CR3_TRCE_MASK, 0);
- }
- 
-@@ -643,20 +633,17 @@ static const struct snd_soc_dai_ops fsl_
- static int fsl_sai_dai_probe(struct snd_soc_dai *cpu_dai)
- {
- 	struct fsl_sai *sai = dev_get_drvdata(cpu_dai->dev);
--	unsigned int ofs = sai->soc_data->reg_offset;
- 
- 	/* Software Reset for both Tx and Rx */
--	regmap_write(sai->regmap, FSL_SAI_TCSR(ofs), FSL_SAI_CSR_SR);
--	regmap_write(sai->regmap, FSL_SAI_RCSR(ofs), FSL_SAI_CSR_SR);
-+	regmap_write(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_SR);
-+	regmap_write(sai->regmap, FSL_SAI_RCSR, FSL_SAI_CSR_SR);
- 	/* Clear SR bit to finish the reset */
--	regmap_write(sai->regmap, FSL_SAI_TCSR(ofs), 0);
--	regmap_write(sai->regmap, FSL_SAI_RCSR(ofs), 0);
-+	regmap_write(sai->regmap, FSL_SAI_TCSR, 0);
-+	regmap_write(sai->regmap, FSL_SAI_RCSR, 0);
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_TCR1(ofs),
--			   FSL_SAI_CR1_RFW_MASK(sai->soc_data->fifo_depth),
-+	regmap_update_bits(sai->regmap, FSL_SAI_TCR1, FSL_SAI_CR1_RFW_MASK,
- 			   sai->soc_data->fifo_depth - FSL_SAI_MAXBURST_TX);
--	regmap_update_bits(sai->regmap, FSL_SAI_RCR1(ofs),
--			   FSL_SAI_CR1_RFW_MASK(sai->soc_data->fifo_depth),
-+	regmap_update_bits(sai->regmap, FSL_SAI_RCR1, FSL_SAI_CR1_RFW_MASK,
- 			   FSL_SAI_MAXBURST_RX - 1);
- 
- 	snd_soc_dai_init_dma_data(cpu_dai, &sai->dma_params_tx,
-@@ -694,12 +681,12 @@ static const struct snd_soc_component_dr
- 	.name           = "fsl-sai",
- };
- 
--static struct reg_default fsl_sai_reg_defaults_ofs0[] = {
--	{FSL_SAI_TCR1(0), 0},
--	{FSL_SAI_TCR2(0), 0},
--	{FSL_SAI_TCR3(0), 0},
--	{FSL_SAI_TCR4(0), 0},
--	{FSL_SAI_TCR5(0), 0},
-+static struct reg_default fsl_sai_reg_defaults[] = {
-+	{FSL_SAI_TCR1, 0},
-+	{FSL_SAI_TCR2, 0},
-+	{FSL_SAI_TCR3, 0},
-+	{FSL_SAI_TCR4, 0},
-+	{FSL_SAI_TCR5, 0},
- 	{FSL_SAI_TDR0, 0},
- 	{FSL_SAI_TDR1, 0},
- 	{FSL_SAI_TDR2, 0},
-@@ -708,50 +695,24 @@ static struct reg_default fsl_sai_reg_de
- 	{FSL_SAI_TDR5, 0},
- 	{FSL_SAI_TDR6, 0},
- 	{FSL_SAI_TDR7, 0},
--	{FSL_SAI_TMR, 0},
--	{FSL_SAI_RCR1(0), 0},
--	{FSL_SAI_RCR2(0), 0},
--	{FSL_SAI_RCR3(0), 0},
--	{FSL_SAI_RCR4(0), 0},
--	{FSL_SAI_RCR5(0), 0},
--	{FSL_SAI_RMR, 0},
--};
--
--static struct reg_default fsl_sai_reg_defaults_ofs8[] = {
--	{FSL_SAI_TCR1(8), 0},
--	{FSL_SAI_TCR2(8), 0},
--	{FSL_SAI_TCR3(8), 0},
--	{FSL_SAI_TCR4(8), 0},
--	{FSL_SAI_TCR5(8), 0},
--	{FSL_SAI_TDR0, 0},
--	{FSL_SAI_TDR1, 0},
--	{FSL_SAI_TDR2, 0},
--	{FSL_SAI_TDR3, 0},
--	{FSL_SAI_TDR4, 0},
--	{FSL_SAI_TDR5, 0},
--	{FSL_SAI_TDR6, 0},
--	{FSL_SAI_TDR7, 0},
--	{FSL_SAI_TMR, 0},
--	{FSL_SAI_RCR1(8), 0},
--	{FSL_SAI_RCR2(8), 0},
--	{FSL_SAI_RCR3(8), 0},
--	{FSL_SAI_RCR4(8), 0},
--	{FSL_SAI_RCR5(8), 0},
--	{FSL_SAI_RMR, 0},
-+	{FSL_SAI_TMR,  0},
-+	{FSL_SAI_RCR1, 0},
-+	{FSL_SAI_RCR2, 0},
-+	{FSL_SAI_RCR3, 0},
-+	{FSL_SAI_RCR4, 0},
-+	{FSL_SAI_RCR5, 0},
-+	{FSL_SAI_RMR,  0},
- };
- 
- static bool fsl_sai_readable_reg(struct device *dev, unsigned int reg)
- {
--	struct fsl_sai *sai = dev_get_drvdata(dev);
--	unsigned int ofs = sai->soc_data->reg_offset;
--
--	if (reg >= FSL_SAI_TCSR(ofs) && reg <= FSL_SAI_TCR5(ofs))
--		return true;
--
--	if (reg >= FSL_SAI_RCSR(ofs) && reg <= FSL_SAI_RCR5(ofs))
--		return true;
--
- 	switch (reg) {
-+	case FSL_SAI_TCSR:
-+	case FSL_SAI_TCR1:
-+	case FSL_SAI_TCR2:
-+	case FSL_SAI_TCR3:
-+	case FSL_SAI_TCR4:
-+	case FSL_SAI_TCR5:
- 	case FSL_SAI_TFR0:
- 	case FSL_SAI_TFR1:
- 	case FSL_SAI_TFR2:
-@@ -761,6 +722,12 @@ static bool fsl_sai_readable_reg(struct
- 	case FSL_SAI_TFR6:
- 	case FSL_SAI_TFR7:
- 	case FSL_SAI_TMR:
-+	case FSL_SAI_RCSR:
-+	case FSL_SAI_RCR1:
-+	case FSL_SAI_RCR2:
-+	case FSL_SAI_RCR3:
-+	case FSL_SAI_RCR4:
-+	case FSL_SAI_RCR5:
- 	case FSL_SAI_RDR0:
- 	case FSL_SAI_RDR1:
- 	case FSL_SAI_RDR2:
-@@ -786,13 +753,9 @@ static bool fsl_sai_readable_reg(struct
- 
- static bool fsl_sai_volatile_reg(struct device *dev, unsigned int reg)
- {
--	struct fsl_sai *sai = dev_get_drvdata(dev);
--	unsigned int ofs = sai->soc_data->reg_offset;
--
--	if (reg == FSL_SAI_TCSR(ofs) || reg == FSL_SAI_RCSR(ofs))
--		return true;
--
- 	switch (reg) {
-+	case FSL_SAI_TCSR:
-+	case FSL_SAI_RCSR:
- 	case FSL_SAI_TFR0:
- 	case FSL_SAI_TFR1:
- 	case FSL_SAI_TFR2:
-@@ -825,16 +788,13 @@ static bool fsl_sai_volatile_reg(struct
- 
- static bool fsl_sai_writeable_reg(struct device *dev, unsigned int reg)
- {
--	struct fsl_sai *sai = dev_get_drvdata(dev);
--	unsigned int ofs = sai->soc_data->reg_offset;
--
--	if (reg >= FSL_SAI_TCSR(ofs) && reg <= FSL_SAI_TCR5(ofs))
--		return true;
--
--	if (reg >= FSL_SAI_RCSR(ofs) && reg <= FSL_SAI_RCR5(ofs))
--		return true;
--
- 	switch (reg) {
-+	case FSL_SAI_TCSR:
-+	case FSL_SAI_TCR1:
-+	case FSL_SAI_TCR2:
-+	case FSL_SAI_TCR3:
-+	case FSL_SAI_TCR4:
-+	case FSL_SAI_TCR5:
- 	case FSL_SAI_TDR0:
- 	case FSL_SAI_TDR1:
- 	case FSL_SAI_TDR2:
-@@ -844,6 +804,12 @@ static bool fsl_sai_writeable_reg(struct
- 	case FSL_SAI_TDR6:
- 	case FSL_SAI_TDR7:
- 	case FSL_SAI_TMR:
-+	case FSL_SAI_RCSR:
-+	case FSL_SAI_RCR1:
-+	case FSL_SAI_RCR2:
-+	case FSL_SAI_RCR3:
-+	case FSL_SAI_RCR4:
-+	case FSL_SAI_RCR5:
- 	case FSL_SAI_RMR:
- 		return true;
- 	default:
-@@ -851,15 +817,15 @@ static bool fsl_sai_writeable_reg(struct
- 	}
- }
- 
--static struct regmap_config fsl_sai_regmap_config = {
-+static const struct regmap_config fsl_sai_regmap_config = {
- 	.reg_bits = 32,
- 	.reg_stride = 4,
- 	.val_bits = 32,
- 	.fast_io = true,
- 
- 	.max_register = FSL_SAI_RMR,
--	.reg_defaults = fsl_sai_reg_defaults_ofs0,
--	.num_reg_defaults = ARRAY_SIZE(fsl_sai_reg_defaults_ofs0),
-+	.reg_defaults = fsl_sai_reg_defaults,
-+	.num_reg_defaults = ARRAY_SIZE(fsl_sai_reg_defaults),
- 	.readable_reg = fsl_sai_readable_reg,
- 	.volatile_reg = fsl_sai_volatile_reg,
- 	.writeable_reg = fsl_sai_writeable_reg,
-@@ -891,12 +857,6 @@ static int fsl_sai_probe(struct platform
- 	if (IS_ERR(base))
- 		return PTR_ERR(base);
- 
--	if (sai->soc_data->reg_offset == 8) {
--		fsl_sai_regmap_config.reg_defaults = fsl_sai_reg_defaults_ofs8;
--		fsl_sai_regmap_config.num_reg_defaults =
--			ARRAY_SIZE(fsl_sai_reg_defaults_ofs8);
--	}
--
- 	sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
- 			"bus", base, &fsl_sai_regmap_config);
- 
-@@ -1026,13 +986,11 @@ static int fsl_sai_remove(struct platfor
- static const struct fsl_sai_soc_data fsl_sai_vf610_data = {
- 	.use_imx_pcm = false,
- 	.fifo_depth = 32,
--	.reg_offset = 0,
- };
- 
- static const struct fsl_sai_soc_data fsl_sai_imx6sx_data = {
- 	.use_imx_pcm = true,
- 	.fifo_depth = 32,
--	.reg_offset = 0,
- };
- 
- static const struct of_device_id fsl_sai_ids[] = {
-@@ -1065,7 +1023,6 @@ static int fsl_sai_runtime_suspend(struc
- static int fsl_sai_runtime_resume(struct device *dev)
- {
- 	struct fsl_sai *sai = dev_get_drvdata(dev);
--	unsigned int ofs = sai->soc_data->reg_offset;
- 	int ret;
- 
- 	ret = clk_prepare_enable(sai->bus_clk);
-@@ -1087,11 +1044,11 @@ static int fsl_sai_runtime_resume(struct
- 	}
- 
- 	regcache_cache_only(sai->regmap, false);
--	regmap_write(sai->regmap, FSL_SAI_TCSR(ofs), FSL_SAI_CSR_SR);
--	regmap_write(sai->regmap, FSL_SAI_RCSR(ofs), FSL_SAI_CSR_SR);
-+	regmap_write(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_SR);
-+	regmap_write(sai->regmap, FSL_SAI_RCSR, FSL_SAI_CSR_SR);
- 	usleep_range(1000, 2000);
--	regmap_write(sai->regmap, FSL_SAI_TCSR(ofs), 0);
--	regmap_write(sai->regmap, FSL_SAI_RCSR(ofs), 0);
-+	regmap_write(sai->regmap, FSL_SAI_TCSR, 0);
-+	regmap_write(sai->regmap, FSL_SAI_RCSR, 0);
- 
- 	ret = regcache_sync(sai->regmap);
- 	if (ret)
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -14,12 +14,12 @@
- 			 SNDRV_PCM_FMTBIT_S32_LE)
- 
- /* SAI Register Map Register */
--#define FSL_SAI_TCSR(ofs)	(0x00 + ofs) /* SAI Transmit Control */
--#define FSL_SAI_TCR1(ofs)	(0x04 + ofs) /* SAI Transmit Configuration 1 */
--#define FSL_SAI_TCR2(ofs)	(0x08 + ofs) /* SAI Transmit Configuration 2 */
--#define FSL_SAI_TCR3(ofs)	(0x0c + ofs) /* SAI Transmit Configuration 3 */
--#define FSL_SAI_TCR4(ofs)	(0x10 + ofs) /* SAI Transmit Configuration 4 */
--#define FSL_SAI_TCR5(ofs)	(0x14 + ofs) /* SAI Transmit Configuration 5 */
-+#define FSL_SAI_TCSR	0x00 /* SAI Transmit Control */
-+#define FSL_SAI_TCR1	0x04 /* SAI Transmit Configuration 1 */
-+#define FSL_SAI_TCR2	0x08 /* SAI Transmit Configuration 2 */
-+#define FSL_SAI_TCR3	0x0c /* SAI Transmit Configuration 3 */
-+#define FSL_SAI_TCR4	0x10 /* SAI Transmit Configuration 4 */
-+#define FSL_SAI_TCR5	0x14 /* SAI Transmit Configuration 5 */
- #define FSL_SAI_TDR0	0x20 /* SAI Transmit Data 0 */
- #define FSL_SAI_TDR1	0x24 /* SAI Transmit Data 1 */
- #define FSL_SAI_TDR2	0x28 /* SAI Transmit Data 2 */
-@@ -37,12 +37,12 @@
- #define FSL_SAI_TFR6	0x58 /* SAI Transmit FIFO 6 */
- #define FSL_SAI_TFR7	0x5C /* SAI Transmit FIFO 7 */
- #define FSL_SAI_TMR	0x60 /* SAI Transmit Mask */
--#define FSL_SAI_RCSR(ofs)	(0x80 + ofs) /* SAI Receive Control */
--#define FSL_SAI_RCR1(ofs)	(0x84 + ofs)/* SAI Receive Configuration 1 */
--#define FSL_SAI_RCR2(ofs)	(0x88 + ofs) /* SAI Receive Configuration 2 */
--#define FSL_SAI_RCR3(ofs)	(0x8c + ofs) /* SAI Receive Configuration 3 */
--#define FSL_SAI_RCR4(ofs)	(0x90 + ofs) /* SAI Receive Configuration 4 */
--#define FSL_SAI_RCR5(ofs)	(0x94 + ofs) /* SAI Receive Configuration 5 */
-+#define FSL_SAI_RCSR	0x80 /* SAI Receive Control */
-+#define FSL_SAI_RCR1	0x84 /* SAI Receive Configuration 1 */
-+#define FSL_SAI_RCR2	0x88 /* SAI Receive Configuration 2 */
-+#define FSL_SAI_RCR3	0x8c /* SAI Receive Configuration 3 */
-+#define FSL_SAI_RCR4	0x90 /* SAI Receive Configuration 4 */
-+#define FSL_SAI_RCR5	0x94 /* SAI Receive Configuration 5 */
- #define FSL_SAI_RDR0	0xa0 /* SAI Receive Data 0 */
- #define FSL_SAI_RDR1	0xa4 /* SAI Receive Data 1 */
- #define FSL_SAI_RDR2	0xa8 /* SAI Receive Data 2 */
-@@ -61,14 +61,14 @@
- #define FSL_SAI_RFR7	0xdc /* SAI Receive FIFO 7 */
- #define FSL_SAI_RMR	0xe0 /* SAI Receive Mask */
- 
--#define FSL_SAI_xCSR(tx, ofs)	(tx ? FSL_SAI_TCSR(ofs) : FSL_SAI_RCSR(ofs))
--#define FSL_SAI_xCR1(tx, ofs)	(tx ? FSL_SAI_TCR1(ofs) : FSL_SAI_RCR1(ofs))
--#define FSL_SAI_xCR2(tx, ofs)	(tx ? FSL_SAI_TCR2(ofs) : FSL_SAI_RCR2(ofs))
--#define FSL_SAI_xCR3(tx, ofs)	(tx ? FSL_SAI_TCR3(ofs) : FSL_SAI_RCR3(ofs))
--#define FSL_SAI_xCR4(tx, ofs)	(tx ? FSL_SAI_TCR4(ofs) : FSL_SAI_RCR4(ofs))
--#define FSL_SAI_xCR5(tx, ofs)	(tx ? FSL_SAI_TCR5(ofs) : FSL_SAI_RCR5(ofs))
--#define FSL_SAI_xDR(tx, ofs)	(tx ? FSL_SAI_TDR(ofs) : FSL_SAI_RDR(ofs))
--#define FSL_SAI_xFR(tx, ofs)	(tx ? FSL_SAI_TFR(ofs) : FSL_SAI_RFR(ofs))
-+#define FSL_SAI_xCSR(tx)	(tx ? FSL_SAI_TCSR : FSL_SAI_RCSR)
-+#define FSL_SAI_xCR1(tx)	(tx ? FSL_SAI_TCR1 : FSL_SAI_RCR1)
-+#define FSL_SAI_xCR2(tx)	(tx ? FSL_SAI_TCR2 : FSL_SAI_RCR2)
-+#define FSL_SAI_xCR3(tx)	(tx ? FSL_SAI_TCR3 : FSL_SAI_RCR3)
-+#define FSL_SAI_xCR4(tx)	(tx ? FSL_SAI_TCR4 : FSL_SAI_RCR4)
-+#define FSL_SAI_xCR5(tx)	(tx ? FSL_SAI_TCR5 : FSL_SAI_RCR5)
-+#define FSL_SAI_xDR(tx)		(tx ? FSL_SAI_TDR : FSL_SAI_RDR)
-+#define FSL_SAI_xFR(tx)		(tx ? FSL_SAI_TFR : FSL_SAI_RFR)
- #define FSL_SAI_xMR(tx)		(tx ? FSL_SAI_TMR : FSL_SAI_RMR)
- 
- /* SAI Transmit/Receive Control Register */
-@@ -158,7 +158,6 @@
- struct fsl_sai_soc_data {
- 	bool use_imx_pcm;
- 	unsigned int fifo_depth;
--	unsigned int reg_offset;
- };
- 
- struct fsl_sai {
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0006-Revert-ASoC-fsl_sai-Update-Tx-Rx-channel-enable-mask.patch b/target/linux/layerscape/patches-5.4/801-audio-0006-Revert-ASoC-fsl_sai-Update-Tx-Rx-channel-enable-mask.patch
deleted file mode 100644
index e116389031..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0006-Revert-ASoC-fsl_sai-Update-Tx-Rx-channel-enable-mask.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 480565647b43c25ae86c635f88ae99f036f4e63a Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Fri, 16 Aug 2019 18:01:33 +0800
-Subject: [PATCH] Revert "ASoC: fsl_sai: Update Tx/Rx channel enable mask"
-
-This reverts commit b84f50b0fcb497a62068926fca793d2d213c7dbd.
----
- sound/soc/fsl/fsl_sai.c | 6 ++----
- sound/soc/fsl/fsl_sai.h | 1 -
- 2 files changed, 2 insertions(+), 5 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -599,8 +599,7 @@ static int fsl_sai_startup(struct snd_pc
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 	int ret;
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx),
--			   FSL_SAI_CR3_TRCE_MASK,
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE,
- 			   FSL_SAI_CR3_TRCE);
- 
- 	ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
-@@ -615,8 +614,7 @@ static void fsl_sai_shutdown(struct snd_
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx),
--			   FSL_SAI_CR3_TRCE_MASK, 0);
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, 0);
- }
- 
- static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -110,7 +110,6 @@
- 
- /* SAI Transmit and Receive Configuration 3 Register */
- #define FSL_SAI_CR3_TRCE	BIT(16)
--#define FSL_SAI_CR3_TRCE_MASK	GENMASK(23, 16)
- #define FSL_SAI_CR3_WDFL(x)	(x)
- #define FSL_SAI_CR3_WDFL_MASK	0x1f
- 
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0007-Revert-ASoC-fsl_sai-Add-registers-definition-for-mul.patch b/target/linux/layerscape/patches-5.4/801-audio-0007-Revert-ASoC-fsl_sai-Add-registers-definition-for-mul.patch
deleted file mode 100644
index d73a4269d6..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0007-Revert-ASoC-fsl_sai-Add-registers-definition-for-mul.patch
+++ /dev/null
@@ -1,184 +0,0 @@
-From 56d254c9b7abf3e5632dd1b257927e23b4449019 Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Fri, 16 Aug 2019 18:01:43 +0800
-Subject: [PATCH] Revert "ASoC: fsl_sai: Add registers definition for multiple
- datalines"
-
-This reverts commit 5f0ac20ed6db1d6da2eea8b862cf3d54fdfb5830.
----
- sound/soc/fsl/fsl_sai.c | 76 +++++++------------------------------------------
- sound/soc/fsl/fsl_sai.h | 36 +++--------------------
- 2 files changed, 14 insertions(+), 98 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -685,14 +685,7 @@ static struct reg_default fsl_sai_reg_de
- 	{FSL_SAI_TCR3, 0},
- 	{FSL_SAI_TCR4, 0},
- 	{FSL_SAI_TCR5, 0},
--	{FSL_SAI_TDR0, 0},
--	{FSL_SAI_TDR1, 0},
--	{FSL_SAI_TDR2, 0},
--	{FSL_SAI_TDR3, 0},
--	{FSL_SAI_TDR4, 0},
--	{FSL_SAI_TDR5, 0},
--	{FSL_SAI_TDR6, 0},
--	{FSL_SAI_TDR7, 0},
-+	{FSL_SAI_TDR,  0},
- 	{FSL_SAI_TMR,  0},
- 	{FSL_SAI_RCR1, 0},
- 	{FSL_SAI_RCR2, 0},
-@@ -711,14 +704,7 @@ static bool fsl_sai_readable_reg(struct
- 	case FSL_SAI_TCR3:
- 	case FSL_SAI_TCR4:
- 	case FSL_SAI_TCR5:
--	case FSL_SAI_TFR0:
--	case FSL_SAI_TFR1:
--	case FSL_SAI_TFR2:
--	case FSL_SAI_TFR3:
--	case FSL_SAI_TFR4:
--	case FSL_SAI_TFR5:
--	case FSL_SAI_TFR6:
--	case FSL_SAI_TFR7:
-+	case FSL_SAI_TFR:
- 	case FSL_SAI_TMR:
- 	case FSL_SAI_RCSR:
- 	case FSL_SAI_RCR1:
-@@ -726,22 +712,8 @@ static bool fsl_sai_readable_reg(struct
- 	case FSL_SAI_RCR3:
- 	case FSL_SAI_RCR4:
- 	case FSL_SAI_RCR5:
--	case FSL_SAI_RDR0:
--	case FSL_SAI_RDR1:
--	case FSL_SAI_RDR2:
--	case FSL_SAI_RDR3:
--	case FSL_SAI_RDR4:
--	case FSL_SAI_RDR5:
--	case FSL_SAI_RDR6:
--	case FSL_SAI_RDR7:
--	case FSL_SAI_RFR0:
--	case FSL_SAI_RFR1:
--	case FSL_SAI_RFR2:
--	case FSL_SAI_RFR3:
--	case FSL_SAI_RFR4:
--	case FSL_SAI_RFR5:
--	case FSL_SAI_RFR6:
--	case FSL_SAI_RFR7:
-+	case FSL_SAI_RDR:
-+	case FSL_SAI_RFR:
- 	case FSL_SAI_RMR:
- 		return true;
- 	default:
-@@ -754,30 +726,9 @@ static bool fsl_sai_volatile_reg(struct
- 	switch (reg) {
- 	case FSL_SAI_TCSR:
- 	case FSL_SAI_RCSR:
--	case FSL_SAI_TFR0:
--	case FSL_SAI_TFR1:
--	case FSL_SAI_TFR2:
--	case FSL_SAI_TFR3:
--	case FSL_SAI_TFR4:
--	case FSL_SAI_TFR5:
--	case FSL_SAI_TFR6:
--	case FSL_SAI_TFR7:
--	case FSL_SAI_RFR0:
--	case FSL_SAI_RFR1:
--	case FSL_SAI_RFR2:
--	case FSL_SAI_RFR3:
--	case FSL_SAI_RFR4:
--	case FSL_SAI_RFR5:
--	case FSL_SAI_RFR6:
--	case FSL_SAI_RFR7:
--	case FSL_SAI_RDR0:
--	case FSL_SAI_RDR1:
--	case FSL_SAI_RDR2:
--	case FSL_SAI_RDR3:
--	case FSL_SAI_RDR4:
--	case FSL_SAI_RDR5:
--	case FSL_SAI_RDR6:
--	case FSL_SAI_RDR7:
-+	case FSL_SAI_TFR:
-+	case FSL_SAI_RFR:
-+	case FSL_SAI_RDR:
- 		return true;
- 	default:
- 		return false;
-@@ -793,14 +744,7 @@ static bool fsl_sai_writeable_reg(struct
- 	case FSL_SAI_TCR3:
- 	case FSL_SAI_TCR4:
- 	case FSL_SAI_TCR5:
--	case FSL_SAI_TDR0:
--	case FSL_SAI_TDR1:
--	case FSL_SAI_TDR2:
--	case FSL_SAI_TDR3:
--	case FSL_SAI_TDR4:
--	case FSL_SAI_TDR5:
--	case FSL_SAI_TDR6:
--	case FSL_SAI_TDR7:
-+	case FSL_SAI_TDR:
- 	case FSL_SAI_TMR:
- 	case FSL_SAI_RCSR:
- 	case FSL_SAI_RCR1:
-@@ -942,8 +886,8 @@ static int fsl_sai_probe(struct platform
- 				   MCLK_DIR(index));
- 	}
- 
--	sai->dma_params_rx.addr = res->start + FSL_SAI_RDR0;
--	sai->dma_params_tx.addr = res->start + FSL_SAI_TDR0;
-+	sai->dma_params_rx.addr = res->start + FSL_SAI_RDR;
-+	sai->dma_params_tx.addr = res->start + FSL_SAI_TDR;
- 	sai->dma_params_rx.maxburst = FSL_SAI_MAXBURST_RX;
- 	sai->dma_params_tx.maxburst = FSL_SAI_MAXBURST_TX;
- 
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -20,22 +20,8 @@
- #define FSL_SAI_TCR3	0x0c /* SAI Transmit Configuration 3 */
- #define FSL_SAI_TCR4	0x10 /* SAI Transmit Configuration 4 */
- #define FSL_SAI_TCR5	0x14 /* SAI Transmit Configuration 5 */
--#define FSL_SAI_TDR0	0x20 /* SAI Transmit Data 0 */
--#define FSL_SAI_TDR1	0x24 /* SAI Transmit Data 1 */
--#define FSL_SAI_TDR2	0x28 /* SAI Transmit Data 2 */
--#define FSL_SAI_TDR3	0x2C /* SAI Transmit Data 3 */
--#define FSL_SAI_TDR4	0x30 /* SAI Transmit Data 4 */
--#define FSL_SAI_TDR5	0x34 /* SAI Transmit Data 5 */
--#define FSL_SAI_TDR6	0x38 /* SAI Transmit Data 6 */
--#define FSL_SAI_TDR7	0x3C /* SAI Transmit Data 7 */
--#define FSL_SAI_TFR0	0x40 /* SAI Transmit FIFO 0 */
--#define FSL_SAI_TFR1	0x44 /* SAI Transmit FIFO 1 */
--#define FSL_SAI_TFR2	0x48 /* SAI Transmit FIFO 2 */
--#define FSL_SAI_TFR3	0x4C /* SAI Transmit FIFO 3 */
--#define FSL_SAI_TFR4	0x50 /* SAI Transmit FIFO 4 */
--#define FSL_SAI_TFR5	0x54 /* SAI Transmit FIFO 5 */
--#define FSL_SAI_TFR6	0x58 /* SAI Transmit FIFO 6 */
--#define FSL_SAI_TFR7	0x5C /* SAI Transmit FIFO 7 */
-+#define FSL_SAI_TDR	0x20 /* SAI Transmit Data */
-+#define FSL_SAI_TFR	0x40 /* SAI Transmit FIFO */
- #define FSL_SAI_TMR	0x60 /* SAI Transmit Mask */
- #define FSL_SAI_RCSR	0x80 /* SAI Receive Control */
- #define FSL_SAI_RCR1	0x84 /* SAI Receive Configuration 1 */
-@@ -43,22 +29,8 @@
- #define FSL_SAI_RCR3	0x8c /* SAI Receive Configuration 3 */
- #define FSL_SAI_RCR4	0x90 /* SAI Receive Configuration 4 */
- #define FSL_SAI_RCR5	0x94 /* SAI Receive Configuration 5 */
--#define FSL_SAI_RDR0	0xa0 /* SAI Receive Data 0 */
--#define FSL_SAI_RDR1	0xa4 /* SAI Receive Data 1 */
--#define FSL_SAI_RDR2	0xa8 /* SAI Receive Data 2 */
--#define FSL_SAI_RDR3	0xac /* SAI Receive Data 3 */
--#define FSL_SAI_RDR4	0xb0 /* SAI Receive Data 4 */
--#define FSL_SAI_RDR5	0xb4 /* SAI Receive Data 5 */
--#define FSL_SAI_RDR6	0xb8 /* SAI Receive Data 6 */
--#define FSL_SAI_RDR7	0xbc /* SAI Receive Data 7 */
--#define FSL_SAI_RFR0	0xc0 /* SAI Receive FIFO 0 */
--#define FSL_SAI_RFR1	0xc4 /* SAI Receive FIFO 1 */
--#define FSL_SAI_RFR2	0xc8 /* SAI Receive FIFO 2 */
--#define FSL_SAI_RFR3	0xcc /* SAI Receive FIFO 3 */
--#define FSL_SAI_RFR4	0xd0 /* SAI Receive FIFO 4 */
--#define FSL_SAI_RFR5	0xd4 /* SAI Receive FIFO 5 */
--#define FSL_SAI_RFR6	0xd8 /* SAI Receive FIFO 6 */
--#define FSL_SAI_RFR7	0xdc /* SAI Receive FIFO 7 */
-+#define FSL_SAI_RDR	0xa0 /* SAI Receive Data */
-+#define FSL_SAI_RFR	0xc0 /* SAI Receive FIFO */
- #define FSL_SAI_RMR	0xe0 /* SAI Receive Mask */
- 
- #define FSL_SAI_xCSR(tx)	(tx ? FSL_SAI_TCSR : FSL_SAI_RCSR)
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0008-Revert-ASoC-Remove-dev_err-usage-after-platform_get_.patch b/target/linux/layerscape/patches-5.4/801-audio-0008-Revert-ASoC-Remove-dev_err-usage-after-platform_get_.patch
deleted file mode 100644
index 9e020c3c61..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0008-Revert-ASoC-Remove-dev_err-usage-after-platform_get_.patch
+++ /dev/null
@@ -1,467 +0,0 @@
-From b3aa9fe657c5e96659d64e6b008e025b433616ad Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Fri, 16 Aug 2019 18:01:53 +0800
-Subject: [PATCH] Revert "ASoC: Remove dev_err() usage after
- platform_get_irq()"
-
-This reverts commit cf9441adb1a35506d7606866c382b9d8614169b5.
----
- sound/soc/atmel/atmel-classd.c             |  7 +++++--
- sound/soc/atmel/atmel-pdmic.c              |  7 +++++--
- sound/soc/bcm/cygnus-ssp.c                 |  7 +++++--
- sound/soc/codecs/msm8916-wcd-analog.c      | 12 +++++++++---
- sound/soc/codecs/twl6040.c                 |  4 +++-
- sound/soc/fsl/fsl_asrc.c                   |  4 +++-
- sound/soc/fsl/fsl_esai.c                   |  4 +++-
- sound/soc/fsl/fsl_sai.c                    |  4 +++-
- sound/soc/fsl/fsl_spdif.c                  |  4 +++-
- sound/soc/fsl/fsl_ssi.c                    |  4 +++-
- sound/soc/fsl/imx-ssi.c                    |  4 +++-
- sound/soc/kirkwood/kirkwood-i2s.c          |  4 +++-
- sound/soc/mediatek/common/mtk-btcvsd.c     |  4 +++-
- sound/soc/mediatek/mt2701/mt2701-afe-pcm.c |  4 +++-
- sound/soc/mediatek/mt8173/mt8173-afe-pcm.c |  4 +++-
- sound/soc/mxs/mxs-saif.c                   |  8 ++++++--
- sound/soc/qcom/lpass-platform.c            |  5 ++++-
- sound/soc/sof/intel/bdw.c                  |  5 ++++-
- sound/soc/sof/intel/byt.c                  |  5 ++++-
- sound/soc/sprd/sprd-mcdt.c                 |  4 +++-
- sound/soc/sti/sti_uniperif.c               |  4 +++-
- sound/soc/stm/stm32_i2s.c                  |  5 ++++-
- sound/soc/stm/stm32_sai.c                  |  4 +++-
- sound/soc/stm/stm32_spdifrx.c              |  4 +++-
- sound/soc/sunxi/sun4i-i2s.c                |  4 +++-
- sound/soc/uniphier/aio-dma.c               |  4 +++-
- sound/soc/xilinx/xlnx_formatter_pcm.c      |  2 ++
- sound/soc/xtensa/xtfpga-i2s.c              |  1 +
- 28 files changed, 100 insertions(+), 32 deletions(-)
-
---- a/sound/soc/atmel/atmel-classd.c
-+++ b/sound/soc/atmel/atmel-classd.c
-@@ -571,8 +571,11 @@ static int atmel_classd_probe(struct pla
- 	dd->pdata = pdata;
- 
- 	dd->irq = platform_get_irq(pdev, 0);
--	if (dd->irq < 0)
--		return dd->irq;
-+	if (dd->irq < 0) {
-+		ret = dd->irq;
-+		dev_err(dev, "failed to could not get irq: %d\n", ret);
-+		return ret;
-+	}
- 
- 	dd->pclk = devm_clk_get(dev, "pclk");
- 	if (IS_ERR(dd->pclk)) {
---- a/sound/soc/atmel/atmel-pdmic.c
-+++ b/sound/soc/atmel/atmel-pdmic.c
-@@ -612,8 +612,11 @@ static int atmel_pdmic_probe(struct plat
- 	dd->dev = dev;
- 
- 	dd->irq = platform_get_irq(pdev, 0);
--	if (dd->irq < 0)
--		return dd->irq;
-+	if (dd->irq < 0) {
-+		ret = dd->irq;
-+		dev_err(dev, "failed to get irq: %d\n", ret);
-+		return ret;
-+	}
- 
- 	dd->pclk = devm_clk_get(dev, "pclk");
- 	if (IS_ERR(dd->pclk)) {
---- a/sound/soc/bcm/cygnus-ssp.c
-+++ b/sound/soc/bcm/cygnus-ssp.c
-@@ -1342,8 +1342,11 @@ static int cygnus_ssp_probe(struct platf
- 	}
- 
- 	cygaud->irq_num = platform_get_irq(pdev, 0);
--	if (cygaud->irq_num <= 0)
--		return cygaud->irq_num;
-+	if (cygaud->irq_num <= 0) {
-+		dev_err(dev, "platform_get_irq failed\n");
-+		err = cygaud->irq_num;
-+		return err;
-+	}
- 
- 	err = audio_clk_init(pdev, cygaud);
- 	if (err) {
---- a/sound/soc/codecs/msm8916-wcd-analog.c
-+++ b/sound/soc/codecs/msm8916-wcd-analog.c
-@@ -1195,8 +1195,10 @@ static int pm8916_wcd_analog_spmi_probe(
- 	}
- 
- 	irq = platform_get_irq_byname(pdev, "mbhc_switch_int");
--	if (irq < 0)
-+	if (irq < 0) {
-+		dev_err(dev, "failed to get mbhc switch irq\n");
- 		return irq;
-+	}
- 
- 	ret = devm_request_threaded_irq(dev, irq, NULL,
- 			       pm8916_mbhc_switch_irq_handler,
-@@ -1208,8 +1210,10 @@ static int pm8916_wcd_analog_spmi_probe(
- 
- 	if (priv->mbhc_btn_enabled) {
- 		irq = platform_get_irq_byname(pdev, "mbhc_but_press_det");
--		if (irq < 0)
-+		if (irq < 0) {
-+			dev_err(dev, "failed to get button press irq\n");
- 			return irq;
-+		}
- 
- 		ret = devm_request_threaded_irq(dev, irq, NULL,
- 				       mbhc_btn_press_irq_handler,
-@@ -1220,8 +1224,10 @@ static int pm8916_wcd_analog_spmi_probe(
- 			dev_err(dev, "cannot request mbhc button press irq\n");
- 
- 		irq = platform_get_irq_byname(pdev, "mbhc_but_rel_det");
--		if (irq < 0)
-+		if (irq < 0) {
-+			dev_err(dev, "failed to get button release irq\n");
- 			return irq;
-+		}
- 
- 		ret = devm_request_threaded_irq(dev, irq, NULL,
- 				       mbhc_btn_release_irq_handler,
---- a/sound/soc/codecs/twl6040.c
-+++ b/sound/soc/codecs/twl6040.c
-@@ -1108,8 +1108,10 @@ static int twl6040_probe(struct snd_soc_
- 	priv->component = component;
- 
- 	priv->plug_irq = platform_get_irq(pdev, 0);
--	if (priv->plug_irq < 0)
-+	if (priv->plug_irq < 0) {
-+		dev_err(component->dev, "invalid irq: %d\n", priv->plug_irq);
- 		return priv->plug_irq;
-+	}
- 
- 	INIT_DELAYED_WORK(&priv->hs_jack.work, twl6040_accessory_work);
- 
---- a/sound/soc/fsl/fsl_asrc.c
-+++ b/sound/soc/fsl/fsl_asrc.c
-@@ -885,8 +885,10 @@ static int fsl_asrc_probe(struct platfor
- 	}
- 
- 	irq = platform_get_irq(pdev, 0);
--	if (irq < 0)
-+	if (irq < 0) {
-+		dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
- 		return irq;
-+	}
- 
- 	ret = devm_request_irq(&pdev->dev, irq, fsl_asrc_isr, 0,
- 			       dev_name(&pdev->dev), asrc_priv);
---- a/sound/soc/fsl/fsl_esai.c
-+++ b/sound/soc/fsl/fsl_esai.c
-@@ -979,8 +979,10 @@ static int fsl_esai_probe(struct platfor
- 				PTR_ERR(esai_priv->spbaclk));
- 
- 	irq = platform_get_irq(pdev, 0);
--	if (irq < 0)
-+	if (irq < 0) {
-+		dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
- 		return irq;
-+	}
- 
- 	ret = devm_request_irq(&pdev->dev, irq, esai_isr, 0,
- 			       esai_priv->name, esai_priv);
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -831,8 +831,10 @@ static int fsl_sai_probe(struct platform
- 	}
- 
- 	irq = platform_get_irq(pdev, 0);
--	if (irq < 0)
-+	if (irq < 0) {
-+		dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
- 		return irq;
-+	}
- 
- 	ret = devm_request_irq(&pdev->dev, irq, fsl_sai_isr, 0, np->name, sai);
- 	if (ret) {
---- a/sound/soc/fsl/fsl_spdif.c
-+++ b/sound/soc/fsl/fsl_spdif.c
-@@ -1248,8 +1248,10 @@ static int fsl_spdif_probe(struct platfo
- 	}
- 
- 	irq = platform_get_irq(pdev, 0);
--	if (irq < 0)
-+	if (irq < 0) {
-+		dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
- 		return irq;
-+	}
- 
- 	ret = devm_request_irq(&pdev->dev, irq, spdif_isr, 0,
- 			       dev_name(&pdev->dev), spdif_priv);
---- a/sound/soc/fsl/fsl_ssi.c
-+++ b/sound/soc/fsl/fsl_ssi.c
-@@ -1517,8 +1517,10 @@ static int fsl_ssi_probe(struct platform
- 	}
- 
- 	ssi->irq = platform_get_irq(pdev, 0);
--	if (ssi->irq < 0)
-+	if (ssi->irq < 0) {
-+		dev_err(dev, "no irq for node %s\n", pdev->name);
- 		return ssi->irq;
-+	}
- 
- 	/* Set software limitations for synchronous mode except AC97 */
- 	if (ssi->synchronous && !fsl_ssi_is_ac97(ssi)) {
---- a/sound/soc/fsl/imx-ssi.c
-+++ b/sound/soc/fsl/imx-ssi.c
-@@ -520,8 +520,10 @@ static int imx_ssi_probe(struct platform
- 	}
- 
- 	ssi->irq = platform_get_irq(pdev, 0);
--	if (ssi->irq < 0)
-+	if (ssi->irq < 0) {
-+		dev_err(&pdev->dev, "Failed to get IRQ: %d\n", ssi->irq);
- 		return ssi->irq;
-+	}
- 
- 	ssi->clk = devm_clk_get(&pdev->dev, NULL);
- 	if (IS_ERR(ssi->clk)) {
---- a/sound/soc/kirkwood/kirkwood-i2s.c
-+++ b/sound/soc/kirkwood/kirkwood-i2s.c
-@@ -537,8 +537,10 @@ static int kirkwood_i2s_dev_probe(struct
- 		return PTR_ERR(priv->io);
- 
- 	priv->irq = platform_get_irq(pdev, 0);
--	if (priv->irq < 0)
-+	if (priv->irq < 0) {
-+		dev_err(&pdev->dev, "platform_get_irq failed: %d\n", priv->irq);
- 		return priv->irq;
-+	}
- 
- 	if (np) {
- 		priv->burst = 128;		/* might be 32 or 128 */
---- a/sound/soc/mediatek/common/mtk-btcvsd.c
-+++ b/sound/soc/mediatek/common/mtk-btcvsd.c
-@@ -1335,8 +1335,10 @@ static int mtk_btcvsd_snd_probe(struct p
- 
- 	/* irq */
- 	irq_id = platform_get_irq(pdev, 0);
--	if (irq_id <= 0)
-+	if (irq_id <= 0) {
-+		dev_err(dev, "%pOFn no irq found\n", dev->of_node);
- 		return irq_id < 0 ? irq_id : -ENXIO;
-+	}
- 
- 	ret = devm_request_irq(dev, irq_id, mtk_btcvsd_snd_irq_handler,
- 			       IRQF_TRIGGER_LOW, "BTCVSD_ISR_Handle",
---- a/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
-+++ b/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
-@@ -1350,8 +1350,10 @@ static int mt2701_afe_pcm_dev_probe(stru
- 		return -ENOMEM;
- 
- 	irq_id = platform_get_irq_byname(pdev, "asys");
--	if (irq_id < 0)
-+	if (irq_id < 0) {
-+		dev_err(dev, "unable to get ASYS IRQ\n");
- 		return irq_id;
-+	}
- 
- 	ret = devm_request_irq(dev, irq_id, mt2701_asys_isr,
- 			       IRQF_TRIGGER_NONE, "asys-isr", (void *)afe);
---- a/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
-+++ b/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
-@@ -1074,8 +1074,10 @@ static int mt8173_afe_pcm_dev_probe(stru
- 	afe->dev = &pdev->dev;
- 
- 	irq_id = platform_get_irq(pdev, 0);
--	if (irq_id <= 0)
-+	if (irq_id <= 0) {
-+		dev_err(afe->dev, "np %pOFn no irq\n", afe->dev->of_node);
- 		return irq_id < 0 ? irq_id : -ENXIO;
-+	}
- 	ret = devm_request_irq(afe->dev, irq_id, mt8173_afe_irq_handler,
- 			       0, "Afe_ISR_Handle", (void *)afe);
- 	if (ret) {
---- a/sound/soc/mxs/mxs-saif.c
-+++ b/sound/soc/mxs/mxs-saif.c
-@@ -790,8 +790,12 @@ static int mxs_saif_probe(struct platfor
- 		return PTR_ERR(saif->base);
- 
- 	irq = platform_get_irq(pdev, 0);
--	if (irq < 0)
--		return irq;
-+	if (irq < 0) {
-+		ret = irq;
-+		dev_err(&pdev->dev, "failed to get irq resource: %d\n",
-+			ret);
-+		return ret;
-+	}
- 
- 	saif->dev = &pdev->dev;
- 	ret = devm_request_irq(&pdev->dev, irq, mxs_saif_irq, 0,
---- a/sound/soc/qcom/lpass-platform.c
-+++ b/sound/soc/qcom/lpass-platform.c
-@@ -568,8 +568,11 @@ int asoc_qcom_lpass_platform_register(st
- 	int ret;
- 
- 	drvdata->lpaif_irq = platform_get_irq_byname(pdev, "lpass-irq-lpaif");
--	if (drvdata->lpaif_irq < 0)
-+	if (drvdata->lpaif_irq < 0) {
-+		dev_err(&pdev->dev, "error getting irq handle: %d\n",
-+			drvdata->lpaif_irq);
- 		return -ENODEV;
-+	}
- 
- 	/* ensure audio hardware is disabled */
- 	ret = regmap_write(drvdata->lpaif_map,
---- a/sound/soc/sof/intel/bdw.c
-+++ b/sound/soc/sof/intel/bdw.c
-@@ -483,8 +483,11 @@ static int bdw_probe(struct snd_sof_dev
- 
- 	/* register our IRQ */
- 	sdev->ipc_irq = platform_get_irq(pdev, desc->irqindex_host_ipc);
--	if (sdev->ipc_irq < 0)
-+	if (sdev->ipc_irq < 0) {
-+		dev_err(sdev->dev, "error: failed to get IRQ at index %d\n",
-+			desc->irqindex_host_ipc);
- 		return sdev->ipc_irq;
-+	}
- 
- 	dev_dbg(sdev->dev, "using IRQ %d\n", sdev->ipc_irq);
- 	ret = devm_request_threaded_irq(sdev->dev, sdev->ipc_irq,
---- a/sound/soc/sof/intel/byt.c
-+++ b/sound/soc/sof/intel/byt.c
-@@ -600,8 +600,11 @@ static int byt_acpi_probe(struct snd_sof
- irq:
- 	/* register our IRQ */
- 	sdev->ipc_irq = platform_get_irq(pdev, desc->irqindex_host_ipc);
--	if (sdev->ipc_irq < 0)
-+	if (sdev->ipc_irq < 0) {
-+		dev_err(sdev->dev, "error: failed to get IRQ at index %d\n",
-+			desc->irqindex_host_ipc);
- 		return sdev->ipc_irq;
-+	}
- 
- 	dev_dbg(sdev->dev, "using IRQ %d\n", sdev->ipc_irq);
- 	ret = devm_request_threaded_irq(sdev->dev, sdev->ipc_irq,
---- a/sound/soc/sprd/sprd-mcdt.c
-+++ b/sound/soc/sprd/sprd-mcdt.c
-@@ -959,8 +959,10 @@ static int sprd_mcdt_probe(struct platfo
- 	platform_set_drvdata(pdev, mcdt);
- 
- 	irq = platform_get_irq(pdev, 0);
--	if (irq < 0)
-+	if (irq < 0) {
-+		dev_err(&pdev->dev, "Failed to get MCDT interrupt\n");
- 		return irq;
-+	}
- 
- 	ret = devm_request_irq(&pdev->dev, irq, sprd_mcdt_irq_handler,
- 			       0, "sprd-mcdt", mcdt);
---- a/sound/soc/sti/sti_uniperif.c
-+++ b/sound/soc/sti/sti_uniperif.c
-@@ -426,8 +426,10 @@ static int sti_uniperiph_cpu_dai_of(stru
- 				     UNIPERIF_FIFO_DATA_OFFSET(uni);
- 
- 	uni->irq = platform_get_irq(priv->pdev, 0);
--	if (uni->irq < 0)
-+	if (uni->irq < 0) {
-+		dev_err(dev, "Failed to get IRQ resource\n");
- 		return -ENXIO;
-+	}
- 
- 	uni->type = dev_data->type;
- 
---- a/sound/soc/stm/stm32_i2s.c
-+++ b/sound/soc/stm/stm32_i2s.c
-@@ -855,8 +855,11 @@ static int stm32_i2s_parse_dt(struct pla
- 
- 	/* Get irqs */
- 	irq = platform_get_irq(pdev, 0);
--	if (irq < 0)
-+	if (irq < 0) {
-+		if (irq != -EPROBE_DEFER)
-+			dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
- 		return irq;
-+	}
- 
- 	ret = devm_request_irq(&pdev->dev, irq, stm32_i2s_isr, IRQF_ONESHOT,
- 			       dev_name(&pdev->dev), i2s);
---- a/sound/soc/stm/stm32_sai.c
-+++ b/sound/soc/stm/stm32_sai.c
-@@ -193,8 +193,10 @@ static int stm32_sai_probe(struct platfo
- 
- 	/* init irqs */
- 	sai->irq = platform_get_irq(pdev, 0);
--	if (sai->irq < 0)
-+	if (sai->irq < 0) {
-+		dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
- 		return sai->irq;
-+	}
- 
- 	/* reset */
- 	rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
---- a/sound/soc/stm/stm32_spdifrx.c
-+++ b/sound/soc/stm/stm32_spdifrx.c
-@@ -920,8 +920,10 @@ static int stm32_spdifrx_parse_of(struct
- 	}
- 
- 	spdifrx->irq = platform_get_irq(pdev, 0);
--	if (spdifrx->irq < 0)
-+	if (spdifrx->irq < 0) {
-+		dev_err(&pdev->dev, "No irq for node %s\n", pdev->name);
- 		return spdifrx->irq;
-+	}
- 
- 	return 0;
- }
---- a/sound/soc/sunxi/sun4i-i2s.c
-+++ b/sound/soc/sunxi/sun4i-i2s.c
-@@ -1198,8 +1198,10 @@ static int sun4i_i2s_probe(struct platfo
- 		return PTR_ERR(regs);
- 
- 	irq = platform_get_irq(pdev, 0);
--	if (irq < 0)
-+	if (irq < 0) {
-+		dev_err(&pdev->dev, "Can't retrieve our interrupt\n");
- 		return irq;
-+	}
- 
- 	i2s->variant = of_device_get_match_data(&pdev->dev);
- 	if (!i2s->variant) {
---- a/sound/soc/uniphier/aio-dma.c
-+++ b/sound/soc/uniphier/aio-dma.c
-@@ -289,8 +289,10 @@ int uniphier_aiodma_soc_register_platfor
- 		return PTR_ERR(chip->regmap);
- 
- 	irq = platform_get_irq(pdev, 0);
--	if (irq < 0)
-+	if (irq < 0) {
-+		dev_err(dev, "Could not get irq.\n");
- 		return irq;
-+	}
- 
- 	ret = devm_request_irq(dev, irq, aiodma_irq,
- 			       IRQF_SHARED, dev_name(dev), pdev);
---- a/sound/soc/xilinx/xlnx_formatter_pcm.c
-+++ b/sound/soc/xilinx/xlnx_formatter_pcm.c
-@@ -613,6 +613,7 @@ static int xlnx_formatter_pcm_probe(stru
- 		aud_drv_data->mm2s_irq = platform_get_irq_byname(pdev,
- 								 "irq_mm2s");
- 		if (aud_drv_data->mm2s_irq < 0) {
-+			dev_err(dev, "xlnx audio mm2s irq resource failed\n");
- 			ret = aud_drv_data->mm2s_irq;
- 			goto clk_err;
- 		}
-@@ -639,6 +640,7 @@ static int xlnx_formatter_pcm_probe(stru
- 		aud_drv_data->s2mm_irq = platform_get_irq_byname(pdev,
- 								 "irq_s2mm");
- 		if (aud_drv_data->s2mm_irq < 0) {
-+			dev_err(dev, "xlnx audio s2mm irq resource failed\n");
- 			ret = aud_drv_data->s2mm_irq;
- 			goto clk_err;
- 		}
---- a/sound/soc/xtensa/xtfpga-i2s.c
-+++ b/sound/soc/xtensa/xtfpga-i2s.c
-@@ -570,6 +570,7 @@ static int xtfpga_i2s_probe(struct platf
- 
- 	irq = platform_get_irq(pdev, 0);
- 	if (irq < 0) {
-+		dev_err(&pdev->dev, "No IRQ resource\n");
- 		err = irq;
- 		goto err;
- 	}
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0009-Revert-ASoC-fsl_sai-mark-regmap-as-fast_io.patch b/target/linux/layerscape/patches-5.4/801-audio-0009-Revert-ASoC-fsl_sai-mark-regmap-as-fast_io.patch
deleted file mode 100644
index 454bfd5a18..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0009-Revert-ASoC-fsl_sai-mark-regmap-as-fast_io.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From 6efe2223fa2de658d9017e2abd0ab4849430ef9c Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Wed, 31 Jul 2019 17:11:24 +0800
-Subject: [PATCH] Revert "ASoC: fsl_sai: mark regmap as fast_io"
-
-This reverts commit 6d19d8a3cec74a9680947ecb6abdeda38583110e.
----
- sound/soc/fsl/fsl_sai.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -763,7 +763,6 @@ static const struct regmap_config fsl_sa
- 	.reg_bits = 32,
- 	.reg_stride = 4,
- 	.val_bits = 32,
--	.fast_io = true,
- 
- 	.max_register = FSL_SAI_RMR,
- 	.reg_defaults = fsl_sai_reg_defaults,
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0010-Revert-ASoC-fsl_sai-derive-TX-FIFO-watermark-from-FI.patch b/target/linux/layerscape/patches-5.4/801-audio-0010-Revert-ASoC-fsl_sai-derive-TX-FIFO-watermark-from-FI.patch
deleted file mode 100644
index 07c3b87b04..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0010-Revert-ASoC-fsl_sai-derive-TX-FIFO-watermark-from-FI.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 33c1f03b9eca0c192708c9df295d2a30073cd121 Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Wed, 31 Jul 2019 17:11:32 +0800
-Subject: [PATCH] Revert "ASoC: fsl_sai: derive TX FIFO watermark from FIFO
- depth"
-
-This reverts commit bd517707d85f19a7339ea8b882fcbf0fd9976bd6.
----
- sound/soc/fsl/fsl_sai.c | 4 +---
- sound/soc/fsl/fsl_sai.h | 1 -
- 2 files changed, 1 insertion(+), 4 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -640,7 +640,7 @@ static int fsl_sai_dai_probe(struct snd_
- 	regmap_write(sai->regmap, FSL_SAI_RCSR, 0);
- 
- 	regmap_update_bits(sai->regmap, FSL_SAI_TCR1, FSL_SAI_CR1_RFW_MASK,
--			   sai->soc_data->fifo_depth - FSL_SAI_MAXBURST_TX);
-+			   FSL_SAI_MAXBURST_TX * 2);
- 	regmap_update_bits(sai->regmap, FSL_SAI_RCR1, FSL_SAI_CR1_RFW_MASK,
- 			   FSL_SAI_MAXBURST_RX - 1);
- 
-@@ -928,12 +928,10 @@ static int fsl_sai_remove(struct platfor
- 
- static const struct fsl_sai_soc_data fsl_sai_vf610_data = {
- 	.use_imx_pcm = false,
--	.fifo_depth = 32,
- };
- 
- static const struct fsl_sai_soc_data fsl_sai_imx6sx_data = {
- 	.use_imx_pcm = true,
--	.fifo_depth = 32,
- };
- 
- static const struct of_device_id fsl_sai_ids[] = {
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -128,7 +128,6 @@
- 
- struct fsl_sai_soc_data {
- 	bool use_imx_pcm;
--	unsigned int fifo_depth;
- };
- 
- struct fsl_sai {
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0011-Revert-ASoC-fsl_sai-add-of_match-data.patch b/target/linux/layerscape/patches-5.4/801-audio-0011-Revert-ASoC-fsl_sai-add-of_match-data.patch
deleted file mode 100644
index 12a32bc26b..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0011-Revert-ASoC-fsl_sai-add-of_match-data.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 6e0abca40338d5078be0e5947c7f9723b40bc7e7 Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Mon, 30 Mar 2020 16:17:52 +0800
-Subject: [PATCH] Revert "ASoC: fsl_sai: add of_match data"
-
-This reverts commit 89c9679f699d88986ce552738dc7c5c500c8fc67.
-
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 22 ++++++++--------------
- sound/soc/fsl/fsl_sai.h |  6 +-----
- 2 files changed, 9 insertions(+), 19 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -9,7 +9,6 @@
- #include <linux/dmaengine.h>
- #include <linux/module.h>
- #include <linux/of_address.h>
--#include <linux/of_device.h>
- #include <linux/pm_runtime.h>
- #include <linux/regmap.h>
- #include <linux/slab.h>
-@@ -789,7 +788,10 @@ static int fsl_sai_probe(struct platform
- 		return -ENOMEM;
- 
- 	sai->pdev = pdev;
--	sai->soc_data = of_device_get_match_data(&pdev->dev);
-+
-+	if (of_device_is_compatible(np, "fsl,imx6sx-sai") ||
-+	    of_device_is_compatible(np, "fsl,imx6ul-sai"))
-+		sai->sai_on_imx = true;
- 
- 	sai->is_lsb_first = of_property_read_bool(np, "lsb-first");
- 
-@@ -901,7 +903,7 @@ static int fsl_sai_probe(struct platform
- 	if (ret)
- 		goto err_pm_disable;
- 
--	if (sai->soc_data->use_imx_pcm) {
-+	if (sai->sai_on_imx)
- 		ret = imx_pcm_dma_init(pdev, IMX_SAI_DMABUF_SIZE);
- 		if (ret)
- 			goto err_pm_disable;
-@@ -926,18 +928,10 @@ static int fsl_sai_remove(struct platfor
- 	return 0;
- }
- 
--static const struct fsl_sai_soc_data fsl_sai_vf610_data = {
--	.use_imx_pcm = false,
--};
--
--static const struct fsl_sai_soc_data fsl_sai_imx6sx_data = {
--	.use_imx_pcm = true,
--};
--
- static const struct of_device_id fsl_sai_ids[] = {
--	{ .compatible = "fsl,vf610-sai", .data = &fsl_sai_vf610_data },
--	{ .compatible = "fsl,imx6sx-sai", .data = &fsl_sai_imx6sx_data },
--	{ .compatible = "fsl,imx6ul-sai", .data = &fsl_sai_imx6sx_data },
-+	{ .compatible = "fsl,vf610-sai", },
-+	{ .compatible = "fsl,imx6sx-sai", },
-+	{ .compatible = "fsl,imx6ul-sai", },
- 	{ /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, fsl_sai_ids);
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -126,10 +126,6 @@
- #define FSL_SAI_MAXBURST_TX 6
- #define FSL_SAI_MAXBURST_RX 6
- 
--struct fsl_sai_soc_data {
--	bool use_imx_pcm;
--};
--
- struct fsl_sai {
- 	struct platform_device *pdev;
- 	struct regmap *regmap;
-@@ -139,6 +135,7 @@ struct fsl_sai {
- 	bool is_slave_mode;
- 	bool is_lsb_first;
- 	bool is_dsp_mode;
-+	bool sai_on_imx;
- 	bool synchronous[2];
- 
- 	unsigned int mclk_id[2];
-@@ -146,7 +143,6 @@ struct fsl_sai {
- 	unsigned int slots;
- 	unsigned int slot_width;
- 
--	const struct fsl_sai_soc_data *soc_data;
- 	struct snd_soc_dai_driver cpu_dai_drv;
- 	struct snd_dmaengine_dai_dma_data dma_params_rx;
- 	struct snd_dmaengine_dai_dma_data dma_params_tx;
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0012-MLK-9974-ASoC-fsl_sai-There-is-underrun-detected-in-.patch b/target/linux/layerscape/patches-5.4/801-audio-0012-MLK-9974-ASoC-fsl_sai-There-is-underrun-detected-in-.patch
deleted file mode 100644
index 3b7de3c98b..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0012-MLK-9974-ASoC-fsl_sai-There-is-underrun-detected-in-.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 2a7fa96feddb63d36d64336a994dc4132e8a5cd4 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@freescale.com>
-Date: Mon, 29 Dec 2014 13:40:08 +0800
-Subject: [PATCH] MLK-9974: ASoC: fsl_sai: There is underrun detected in the
- beginning sometimes
-
-Write initial words to SAI FIFO to reduce underrun error
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
-(cherry picked from commit 7ba8ae883d84540fac5ed4147d124399537bc0b3)
-(cherry picked from commit f4435f35aa2a97551d2c4a12ca316c354a880f85)
----
- sound/soc/fsl/fsl_sai.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -506,7 +506,9 @@ static int fsl_sai_trigger(struct snd_pc
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
-+	u8 channels = substream->runtime->channels;
- 	u32 xcsr, count = 100;
-+	int i;
- 
- 	/*
- 	 * Asynchronous mode: Clear SYNC for both Tx and Rx.
-@@ -529,6 +531,11 @@ static int fsl_sai_trigger(struct snd_pc
- 		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
- 				   FSL_SAI_CSR_FRDE, FSL_SAI_CSR_FRDE);
- 
-+		for (i = 0; tx && i < channels; i++)
-+			regmap_write(sai->regmap, FSL_SAI_TDR, 0x0);
-+		if (tx)
-+			udelay(10);
-+
- 		regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
- 				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
- 		regmap_update_bits(sai->regmap, FSL_SAI_TCSR,
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0013-MLK-10611-1-ASoC-fsl-sai-Just-one-device-can-playbac.patch b/target/linux/layerscape/patches-5.4/801-audio-0013-MLK-10611-1-ASoC-fsl-sai-Just-one-device-can-playbac.patch
deleted file mode 100644
index faff9786b7..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0013-MLK-10611-1-ASoC-fsl-sai-Just-one-device-can-playbac.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 0ab3461b68ccc1d4ffb37dbc7f2e57adc8aed0fb Mon Sep 17 00:00:00 2001
-From: Zidan Wang <zidan.wang@freescale.com>
-Date: Fri, 10 Apr 2015 09:52:36 +0800
-Subject: [PATCH] MLK-10611-1 ASoC: fsl-sai: Just one device can
- playback(captrue) when using the same SAI
-
-Just one device can playback(captrue) when using the same SAI.
-
-Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
-(cherry picked from commit 7981a488c4da440db21f0544b519b44636a0cabb)
----
- sound/soc/fsl/fsl_sai.c | 10 ++++++++++
- sound/soc/fsl/fsl_sai.h |  1 +
- 2 files changed, 11 insertions(+)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -605,6 +605,11 @@ static int fsl_sai_startup(struct snd_pc
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 	int ret;
- 
-+	if (sai->is_stream_opened[tx])
-+		return -EBUSY;
-+	else
-+		sai->is_stream_opened[tx] = true;
-+
- 	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE,
- 			   FSL_SAI_CR3_TRCE);
- 
-@@ -621,6 +626,11 @@ static void fsl_sai_shutdown(struct snd_
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 
- 	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, 0);
-+
-+	if (sai->is_stream_opened[tx]) {
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, 0);
-+		sai->is_stream_opened[tx] = false;
-+	}
- }
- 
- static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -137,6 +137,7 @@ struct fsl_sai {
- 	bool is_dsp_mode;
- 	bool sai_on_imx;
- 	bool synchronous[2];
-+	bool is_stream_opened[2];
- 
- 	unsigned int mclk_id[2];
- 	unsigned int mclk_streams;
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0014-MLK-11628-ASoC-fsl_sai-add-initial-value-for-is_slav.patch b/target/linux/layerscape/patches-5.4/801-audio-0014-MLK-11628-ASoC-fsl_sai-add-initial-value-for-is_slav.patch
deleted file mode 100644
index 0fe22451f1..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0014-MLK-11628-ASoC-fsl_sai-add-initial-value-for-is_slav.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From b40561fa263f3f9b06be0dd9b9e1665478d1def6 Mon Sep 17 00:00:00 2001
-From: Zidan Wang <zidan.wang@freescale.com>
-Date: Fri, 25 Sep 2015 14:27:00 +0800
-Subject: [PATCH] MLK-11628 ASoC: fsl_sai: add initial value for is_slave_mode
-
-After playback audio with sai<->wm8960 sound card, is_slave_mode
-will be set, but it will not be cleared. So playback audio with
-sai<->sii902x sound card will have no voice.
-
-Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
----
- sound/soc/fsl/fsl_sai.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -264,6 +264,8 @@ static int fsl_sai_set_dai_fmt_tr(struct
- 		return -EINVAL;
- 	}
- 
-+	sai->is_slave_mode = false;
-+
- 	/* DAI clock master masks */
- 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
- 	case SND_SOC_DAIFMT_CBS_CFS:
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0015-ASoC-fsl-sai-set-xCR4-xCR5-xMR-for-SAI-master-mode.patch b/target/linux/layerscape/patches-5.4/801-audio-0015-ASoC-fsl-sai-set-xCR4-xCR5-xMR-for-SAI-master-mode.patch
deleted file mode 100644
index 8dbc6d1551..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0015-ASoC-fsl-sai-set-xCR4-xCR5-xMR-for-SAI-master-mode.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 0b33246dfb59df34b2b834eb00f7aea75cbd4366 Mon Sep 17 00:00:00 2001
-From: Zidan Wang <zidan.wang@freescale.com>
-Date: Mon, 9 Nov 2015 19:03:13 +0800
-Subject: [PATCH] ASoC: fsl-sai: set xCR4/xCR5/xMR for SAI master mode
-
-For SAI master mode, when Tx(Rx) sync with Rx(Tx) clock, Rx(Tx) will
-generate bclk and frame clock for Tx(Rx), we should set RCR4(TCR4),
-RCR5(TCR5) and RMR(TMR) for playback(capture), or there will be sync
-error sometimes.
-
-Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
-Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
-(cherry picked from commit 51659ca069ce5bdf20675a7967a39ef8419e87f2)
----
- sound/soc/fsl/fsl_sai.c | 29 +++++++++++++++++++++++++++++
- 1 file changed, 29 insertions(+)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -476,6 +476,35 @@ static int fsl_sai_hw_params(struct snd_
- 		}
- 	}
- 
-+	/*
-+	 * For SAI master mode, when Tx(Rx) sync with Rx(Tx) clock, Rx(Tx) will
-+	 * generate bclk and frame clock for Tx(Rx), we should set RCR4(TCR4),
-+	 * RCR5(TCR5) and RMR(TMR) for playback(capture), or there will be sync
-+	 * error.
-+	 */
-+
-+	if (!sai->is_slave_mode) {
-+		if (!sai->synchronous[TX] && sai->synchronous[RX] && !tx) {
-+			regmap_update_bits(sai->regmap, FSL_SAI_TCR4,
-+				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
-+				val_cr4);
-+			regmap_update_bits(sai->regmap, FSL_SAI_TCR5,
-+				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
-+				FSL_SAI_CR5_FBT_MASK, val_cr5);
-+			regmap_write(sai->regmap, FSL_SAI_TMR,
-+				~0UL - ((1 << channels) - 1));
-+		} else if (!sai->synchronous[RX] && sai->synchronous[TX] && tx) {
-+			regmap_update_bits(sai->regmap, FSL_SAI_RCR4,
-+				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
-+				val_cr4);
-+			regmap_update_bits(sai->regmap, FSL_SAI_RCR5,
-+				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
-+				FSL_SAI_CR5_FBT_MASK, val_cr5);
-+			regmap_write(sai->regmap, FSL_SAI_RMR,
-+				~0UL - ((1 << channels) - 1));
-+		}
-+	}
-+
- 	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
- 			   FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
- 			   val_cr4);
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0016-MLK-12374-ASoC-fsl_sai-Change-the-dev_warn-to-dev_db.patch b/target/linux/layerscape/patches-5.4/801-audio-0016-MLK-12374-ASoC-fsl_sai-Change-the-dev_warn-to-dev_db.patch
deleted file mode 100644
index 9772d7db7b..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0016-MLK-12374-ASoC-fsl_sai-Change-the-dev_warn-to-dev_db.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 81b0102ac649207dff14b265311e6b3d2724adc4 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@freescale.com>
-Date: Thu, 4 Feb 2016 15:07:57 +0800
-Subject: [PATCH] MLK-12374: ASoC: fsl_sai: Change the dev_warn to dev_dbg
-
-When audio stop, it will first stop dma, then stop cpu_dai.
-If there is delay between dma stop and cpu dai stop, there
-will be underrun error, the print will cost time, then will
-cause another underrun error, it is a infinite loop.
-Which will cause the cpu dai can't stop.
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
----
- sound/soc/fsl/fsl_sai.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -2,7 +2,7 @@
- //
- // Freescale ALSA SoC Digital Audio Interface (SAI) driver.
- //
--// Copyright 2012-2015 Freescale Semiconductor, Inc.
-+// Copyright 2012-2016 Freescale Semiconductor, Inc.
- 
- #include <linux/clk.h>
- #include <linux/delay.h>
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0017-MLK-12786-2-ASoC-fsl_sai-correct-the-clock-source-fo.patch b/target/linux/layerscape/patches-5.4/801-audio-0017-MLK-12786-2-ASoC-fsl_sai-correct-the-clock-source-fo.patch
deleted file mode 100644
index 470b1d02c4..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0017-MLK-12786-2-ASoC-fsl_sai-correct-the-clock-source-fo.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From ee6adaada426e3f04925f93b4372fa3534889775 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@freescale.com>
-Date: Thu, 12 May 2016 17:54:08 +0800
-Subject: [PATCH] MLK-12786-2: ASoC: fsl_sai: correct the clock source for
- mclk0
-
-mclk0 is assigned through the device tree.
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
----
- sound/soc/fsl/fsl_sai.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -868,8 +868,7 @@ static int fsl_sai_probe(struct platform
- 		sai->bus_clk = NULL;
- 	}
- 
--	sai->mclk_clk[0] = sai->bus_clk;
--	for (i = 1; i < FSL_SAI_MCLK_MAX; i++) {
-+	for (i = 0; i < FSL_SAI_MCLK_MAX; i++) {
- 		sprintf(tmp, "mclk%d", i);
- 		sai->mclk_clk[i] = devm_clk_get(&pdev->dev, tmp);
- 		if (IS_ERR(sai->mclk_clk[i])) {
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0018-MLK-13574-2-ASoC-fsl_sai-refine-driver-for-ip-upgrad.patch b/target/linux/layerscape/patches-5.4/801-audio-0018-MLK-13574-2-ASoC-fsl_sai-refine-driver-for-ip-upgrad.patch
deleted file mode 100644
index 793936d376..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0018-MLK-13574-2-ASoC-fsl_sai-refine-driver-for-ip-upgrad.patch
+++ /dev/null
@@ -1,423 +0,0 @@
-From c516c261c49d0ce9509d6b9623dec6a4e9f919c3 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@freescale.com>
-Date: Mon, 30 Mar 2020 16:21:00 +0800
-Subject: [PATCH] MLK-13574-2: ASoC: fsl_sai: refine driver for ip upgrade
-
-In imx7ulp1, the sai can support two TX channel and two RX
-channels, So the usage need to be updated.
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 145 ++++++++++++++++++++++++++++++++++++++++--------
- sound/soc/fsl/fsl_sai.h |  37 ++++++++++--
- 2 files changed, 156 insertions(+), 26 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -8,16 +8,19 @@
- #include <linux/delay.h>
- #include <linux/dmaengine.h>
- #include <linux/module.h>
-+#include <linux/of_device.h>
- #include <linux/of_address.h>
- #include <linux/pm_runtime.h>
- #include <linux/regmap.h>
- #include <linux/slab.h>
- #include <linux/time.h>
-+#include <linux/pm_qos.h>
- #include <sound/core.h>
- #include <sound/dmaengine_pcm.h>
- #include <sound/pcm_params.h>
- #include <linux/mfd/syscon.h>
- #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
-+#include <linux/pm_runtime.h>
- 
- #include "fsl_sai.h"
- #include "imx-pcm.h"
-@@ -25,6 +28,39 @@
- #define FSL_SAI_FLAGS (FSL_SAI_CSR_SEIE |\
- 		       FSL_SAI_CSR_FEIE)
- 
-+static struct fsl_sai_soc_data fsl_sai_vf610 = {
-+	.imx = false,
-+	/*dataline is mask, not index*/
-+	.dataline = 0x1,
-+	.fifos = 1,
-+	.fifo_depth = 32,
-+	.flags = 0,
-+};
-+
-+static struct fsl_sai_soc_data fsl_sai_imx6sx = {
-+	.imx = true,
-+	.dataline = 0x1,
-+	.fifos = 1,
-+	.fifo_depth = 32,
-+	.flags = 0,
-+};
-+
-+static struct fsl_sai_soc_data fsl_sai_imx6ul = {
-+	.imx = true,
-+	.dataline = 0x1,
-+	.fifos = 1,
-+	.fifo_depth = 32,
-+	.flags = 0,
-+};
-+
-+static struct fsl_sai_soc_data fsl_sai_imx7ulp = {
-+	.imx = true,
-+	.dataline = 0x3,
-+	.fifos = 2,
-+	.fifo_depth = 16,
-+	.flags = SAI_FLAG_PMQOS,
-+};
-+
- static const unsigned int fsl_sai_rates[] = {
- 	8000, 11025, 12000, 16000, 22050,
- 	24000, 32000, 44100, 48000, 64000,
-@@ -505,6 +541,29 @@ static int fsl_sai_hw_params(struct snd_
- 		}
- 	}
- 
-+	if (sai->soc->dataline != 0x1) {
-+		switch (sai->dataline[tx]) {
-+		case 0x0:
-+			break;
-+		case 0x1:
-+			regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
-+				FSL_SAI_CR4_FCOMB_SOFT | FSL_SAI_CR4_FCOMB_SHIFT, 0);
-+			break;
-+		case 0x2:
-+			regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
-+				FSL_SAI_CR4_FCOMB_SOFT | FSL_SAI_CR4_FCOMB_SHIFT,
-+				FSL_SAI_CR4_FCOMB_SOFT | FSL_SAI_CR4_FCOMB_SHIFT);
-+			break;
-+		case 0x3:
-+			regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
-+				FSL_SAI_CR4_FCOMB_SOFT | FSL_SAI_CR4_FCOMB_SHIFT,
-+				FSL_SAI_CR4_FCOMB_SOFT);
-+			break;
-+		default:
-+			break;
-+		}
-+	}
-+
- 	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
- 			   FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
- 			   val_cr4);
-@@ -563,14 +622,16 @@ static int fsl_sai_trigger(struct snd_pc
- 				   FSL_SAI_CSR_FRDE, FSL_SAI_CSR_FRDE);
- 
- 		for (i = 0; tx && i < channels; i++)
--			regmap_write(sai->regmap, FSL_SAI_TDR, 0x0);
-+			regmap_write(sai->regmap, FSL_SAI_TDR0, 0x0);
- 		if (tx)
- 			udelay(10);
- 
--		regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
--				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
- 		regmap_update_bits(sai->regmap, FSL_SAI_TCSR,
- 				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
-+		regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
-+				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
-+				   FSL_SAI_CSR_SE, FSL_SAI_CSR_SE);
- 
- 		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
- 				   FSL_SAI_CSR_xIE_MASK, FSL_SAI_FLAGS);
-@@ -641,8 +702,8 @@ static int fsl_sai_startup(struct snd_pc
- 	else
- 		sai->is_stream_opened[tx] = true;
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE,
--			   FSL_SAI_CR3_TRCE);
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE0|FSL_SAI_CR3_TRCE1,
-+			   FSL_SAI_CR3_TRCE(sai->dataline[tx]));
- 
- 	ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
- 			SNDRV_PCM_HW_PARAM_RATE, &fsl_sai_rate_constraints);
-@@ -659,7 +720,7 @@ static void fsl_sai_shutdown(struct snd_
- 	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, 0);
- 
- 	if (sai->is_stream_opened[tx]) {
--		regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, 0);
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE0 | FSL_SAI_CR3_TRCE1, 0);
- 		sai->is_stream_opened[tx] = false;
- 	}
- }
-@@ -687,7 +748,7 @@ static int fsl_sai_dai_probe(struct snd_
- 	regmap_write(sai->regmap, FSL_SAI_RCSR, 0);
- 
- 	regmap_update_bits(sai->regmap, FSL_SAI_TCR1, FSL_SAI_CR1_RFW_MASK,
--			   FSL_SAI_MAXBURST_TX * 2);
-+			   sai->soc->fifo_depth - FSL_SAI_MAXBURST_TX);
- 	regmap_update_bits(sai->regmap, FSL_SAI_RCR1, FSL_SAI_CR1_RFW_MASK,
- 			   FSL_SAI_MAXBURST_RX - 1);
- 
-@@ -732,7 +793,8 @@ static struct reg_default fsl_sai_reg_de
- 	{FSL_SAI_TCR3, 0},
- 	{FSL_SAI_TCR4, 0},
- 	{FSL_SAI_TCR5, 0},
--	{FSL_SAI_TDR,  0},
-+	{FSL_SAI_TDR0, 0},
-+	{FSL_SAI_TDR1, 0},
- 	{FSL_SAI_TMR,  0},
- 	{FSL_SAI_RCR1, 0},
- 	{FSL_SAI_RCR2, 0},
-@@ -751,7 +813,8 @@ static bool fsl_sai_readable_reg(struct
- 	case FSL_SAI_TCR3:
- 	case FSL_SAI_TCR4:
- 	case FSL_SAI_TCR5:
--	case FSL_SAI_TFR:
-+	case FSL_SAI_TFR0:
-+	case FSL_SAI_TFR1:
- 	case FSL_SAI_TMR:
- 	case FSL_SAI_RCSR:
- 	case FSL_SAI_RCR1:
-@@ -759,8 +822,10 @@ static bool fsl_sai_readable_reg(struct
- 	case FSL_SAI_RCR3:
- 	case FSL_SAI_RCR4:
- 	case FSL_SAI_RCR5:
--	case FSL_SAI_RDR:
--	case FSL_SAI_RFR:
-+	case FSL_SAI_RDR0:
-+	case FSL_SAI_RDR1:
-+	case FSL_SAI_RFR0:
-+	case FSL_SAI_RFR1:
- 	case FSL_SAI_RMR:
- 		return true;
- 	default:
-@@ -773,9 +838,12 @@ static bool fsl_sai_volatile_reg(struct
- 	switch (reg) {
- 	case FSL_SAI_TCSR:
- 	case FSL_SAI_RCSR:
--	case FSL_SAI_TFR:
--	case FSL_SAI_RFR:
--	case FSL_SAI_RDR:
-+	case FSL_SAI_TFR0:
-+	case FSL_SAI_TFR1:
-+	case FSL_SAI_RFR0:
-+	case FSL_SAI_RFR1:
-+	case FSL_SAI_RDR0:
-+	case FSL_SAI_RDR1:
- 		return true;
- 	default:
- 		return false;
-@@ -791,7 +859,8 @@ static bool fsl_sai_writeable_reg(struct
- 	case FSL_SAI_TCR3:
- 	case FSL_SAI_TCR4:
- 	case FSL_SAI_TCR5:
--	case FSL_SAI_TDR:
-+	case FSL_SAI_TDR0:
-+	case FSL_SAI_TDR1:
- 	case FSL_SAI_TMR:
- 	case FSL_SAI_RCSR:
- 	case FSL_SAI_RCR1:
-@@ -820,9 +889,19 @@ static const struct regmap_config fsl_sa
- 	.cache_type = REGCACHE_FLAT,
- };
- 
-+static const struct of_device_id fsl_sai_ids[] = {
-+	{ .compatible = "fsl,vf610-sai", .data = &fsl_sai_vf610 },
-+	{ .compatible = "fsl,imx6sx-sai", .data = &fsl_sai_imx6sx },
-+	{ .compatible = "fsl,imx6ul-sai", .data = &fsl_sai_imx6ul },
-+	{ .compatible = "fsl,imx7ulp-sai", .data = &fsl_sai_imx7ulp },
-+	{ /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, fsl_sai_ids);
-+
- static int fsl_sai_probe(struct platform_device *pdev)
- {
- 	struct device_node *np = pdev->dev.of_node;
-+	const struct of_device_id *of_id;
- 	struct fsl_sai *sai;
- 	struct regmap *gpr;
- 	struct resource *res;
-@@ -837,11 +916,12 @@ static int fsl_sai_probe(struct platform
- 
- 	sai->pdev = pdev;
- 
--	if (of_device_is_compatible(np, "fsl,imx6sx-sai") ||
--	    of_device_is_compatible(np, "fsl,imx6ul-sai"))
--		sai->sai_on_imx = true;
-+	of_id = of_match_device(fsl_sai_ids, &pdev->dev);
-+	if (!of_id || !of_id->data)
-+		return -EINVAL;
- 
- 	sai->is_lsb_first = of_property_read_bool(np, "lsb-first");
-+	sai->soc = of_id->data;
- 
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	base = devm_ioremap_resource(&pdev->dev, res);
-@@ -873,11 +953,25 @@ static int fsl_sai_probe(struct platform
- 		sai->mclk_clk[i] = devm_clk_get(&pdev->dev, tmp);
- 		if (IS_ERR(sai->mclk_clk[i])) {
- 			dev_err(&pdev->dev, "failed to get mclk%d clock: %ld\n",
--					i + 1, PTR_ERR(sai->mclk_clk[i]));
-+					i, PTR_ERR(sai->mclk_clk[i]));
- 			sai->mclk_clk[i] = NULL;
- 		}
- 	}
- 
-+	/*dataline mask for rx and tx*/
-+	ret = of_property_read_u32_index(np, "fsl,dataline", 0, &sai->dataline[0]);
-+	if (ret)
-+		sai->dataline[0] = 1;
-+
-+	ret = of_property_read_u32_index(np, "fsl,dataline", 1, &sai->dataline[1]);
-+	if (ret)
-+		sai->dataline[1] = 1;
-+
-+	if ((sai->dataline[0] & (~sai->soc->dataline)) || sai->dataline[1] & (~sai->soc->dataline)) {
-+		dev_err(&pdev->dev, "dataline setting error, Mask is 0x%x\n", sai->soc->dataline);
-+		return -EINVAL;
-+	}
-+
- 	irq = platform_get_irq(pdev, 0);
- 	if (irq < 0) {
- 		dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
-@@ -936,8 +1030,8 @@ static int fsl_sai_probe(struct platform
- 				   MCLK_DIR(index));
- 	}
- 
--	sai->dma_params_rx.addr = res->start + FSL_SAI_RDR;
--	sai->dma_params_tx.addr = res->start + FSL_SAI_TDR;
-+	sai->dma_params_rx.addr = res->start + FSL_SAI_RDR0;
-+	sai->dma_params_tx.addr = res->start + FSL_SAI_TDR0;
- 	sai->dma_params_rx.maxburst = FSL_SAI_MAXBURST_RX;
- 	sai->dma_params_tx.maxburst = FSL_SAI_MAXBURST_TX;
- 
-@@ -950,7 +1044,7 @@ static int fsl_sai_probe(struct platform
- 	if (ret)
- 		goto err_pm_disable;
- 
--	if (sai->sai_on_imx)
-+	if (sai->soc->imx)
- 		ret = imx_pcm_dma_init(pdev, IMX_SAI_DMABUF_SIZE);
- 		if (ret)
- 			goto err_pm_disable;
-@@ -996,6 +1090,9 @@ static int fsl_sai_runtime_suspend(struc
- 
- 	clk_disable_unprepare(sai->bus_clk);
- 
-+	if (sai->soc->flags & SAI_FLAG_PMQOS)
-+		pm_qos_remove_request(&sai->pm_qos_req);
-+
- 	regcache_cache_only(sai->regmap, true);
- 	regcache_mark_dirty(sai->regmap);
- 
-@@ -1025,6 +1122,10 @@ static int fsl_sai_runtime_resume(struct
- 			goto disable_tx_clk;
- 	}
- 
-+	if (sai->soc->flags & SAI_FLAG_PMQOS)
-+		pm_qos_add_request(&sai->pm_qos_req,
-+				PM_QOS_CPU_DMA_LATENCY, 0);
-+
- 	regcache_cache_only(sai->regmap, false);
- 	regmap_write(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_SR);
- 	regmap_write(sai->regmap, FSL_SAI_RCSR, FSL_SAI_CSR_SR);
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -1,11 +1,12 @@
- /* SPDX-License-Identifier: GPL-2.0 */
- /*
-- * Copyright 2012-2013 Freescale Semiconductor, Inc.
-+ * Copyright 2012-2016 Freescale Semiconductor, Inc.
-  */
- 
- #ifndef __FSL_SAI_H
- #define __FSL_SAI_H
- 
-+#include <linux/pm_qos.h>
- #include <sound/dmaengine_pcm.h>
- 
- #define FSL_SAI_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
-@@ -20,7 +21,10 @@
- #define FSL_SAI_TCR3	0x0c /* SAI Transmit Configuration 3 */
- #define FSL_SAI_TCR4	0x10 /* SAI Transmit Configuration 4 */
- #define FSL_SAI_TCR5	0x14 /* SAI Transmit Configuration 5 */
--#define FSL_SAI_TDR	0x20 /* SAI Transmit Data */
-+#define FSL_SAI_TDR0    0x20 /* SAI Transmit Data */
-+#define FSL_SAI_TDR1    0x24 /* SAI Transmit Data */
-+#define FSL_SAI_TFR0    0x40 /* SAI Transmit FIFO */
-+#define FSL_SAI_TFR1    0x44 /* SAI Transmit FIFO */
- #define FSL_SAI_TFR	0x40 /* SAI Transmit FIFO */
- #define FSL_SAI_TMR	0x60 /* SAI Transmit Mask */
- #define FSL_SAI_RCSR	0x80 /* SAI Receive Control */
-@@ -29,7 +33,10 @@
- #define FSL_SAI_RCR3	0x8c /* SAI Receive Configuration 3 */
- #define FSL_SAI_RCR4	0x90 /* SAI Receive Configuration 4 */
- #define FSL_SAI_RCR5	0x94 /* SAI Receive Configuration 5 */
--#define FSL_SAI_RDR	0xa0 /* SAI Receive Data */
-+#define FSL_SAI_RDR0    0xa0 /* SAI Receive Data */
-+#define FSL_SAI_RDR1    0xa4 /* SAI Receive Data */
-+#define FSL_SAI_RFR0    0xc0 /* SAI Receive FIFO */
-+#define FSL_SAI_RFR1    0xc4 /* SAI Receive FIFO */
- #define FSL_SAI_RFR	0xc0 /* SAI Receive FIFO */
- #define FSL_SAI_RMR	0xe0 /* SAI Receive Mask */
- 
-@@ -45,6 +52,7 @@
- 
- /* SAI Transmit/Receive Control Register */
- #define FSL_SAI_CSR_TERE	BIT(31)
-+#define FSL_SAI_CSR_SE		BIT(30)
- #define FSL_SAI_CSR_FR		BIT(25)
- #define FSL_SAI_CSR_SR		BIT(24)
- #define FSL_SAI_CSR_xF_SHIFT	16
-@@ -81,11 +89,19 @@
- #define FSL_SAI_CR2_DIV_MASK	0xff
- 
- /* SAI Transmit and Receive Configuration 3 Register */
--#define FSL_SAI_CR3_TRCE	BIT(16)
-+#define FSL_SAI_CR3_TRCE0	BIT(16)
-+#define FSL_SAI_CR3_TRCE1	BIT(17)
-+#define FSL_SAI_CR3_TRCE(x)	(x << 16)
- #define FSL_SAI_CR3_WDFL(x)	(x)
- #define FSL_SAI_CR3_WDFL_MASK	0x1f
- 
- /* SAI Transmit and Receive Configuration 4 Register */
-+
-+#define FSL_SAI_CR4_FCONT	BIT(28)
-+#define FSL_SAI_CR4_FCOMB_SHIFT BIT(26)
-+#define FSL_SAI_CR4_FCOMB_SOFT  BIT(27)
-+#define FSL_SAI_CR4_FPACK_8     (0x2 << 24)
-+#define FSL_SAI_CR4_FPACK_16    (0x3 << 24)
- #define FSL_SAI_CR4_FRSZ(x)	(((x) - 1) << 16)
- #define FSL_SAI_CR4_FRSZ_MASK	(0x1f << 16)
- #define FSL_SAI_CR4_SYWD(x)	(((x) - 1) << 8)
-@@ -126,6 +142,16 @@
- #define FSL_SAI_MAXBURST_TX 6
- #define FSL_SAI_MAXBURST_RX 6
- 
-+#define SAI_FLAG_PMQOS   BIT(0)
-+
-+struct fsl_sai_soc_data {
-+	unsigned int fifo_depth;
-+	unsigned int fifos;
-+	unsigned int dataline;
-+	unsigned int flags;
-+	bool imx;
-+};
-+
- struct fsl_sai {
- 	struct platform_device *pdev;
- 	struct regmap *regmap;
-@@ -138,6 +164,7 @@ struct fsl_sai {
- 	bool sai_on_imx;
- 	bool synchronous[2];
- 	bool is_stream_opened[2];
-+	unsigned int dataline[2];
- 
- 	unsigned int mclk_id[2];
- 	unsigned int mclk_streams;
-@@ -147,6 +174,8 @@ struct fsl_sai {
- 	struct snd_soc_dai_driver cpu_dai_drv;
- 	struct snd_dmaengine_dai_dma_data dma_params_rx;
- 	struct snd_dmaengine_dai_dma_data dma_params_tx;
-+	const struct fsl_sai_soc_data *soc;
-+	struct pm_qos_request pm_qos_req;
- };
- 
- #define TX 1
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0019-MLK-13609-ASoC-fsl_sai-fix-for-synchronize-mode.patch b/target/linux/layerscape/patches-5.4/801-audio-0019-MLK-13609-ASoC-fsl_sai-fix-for-synchronize-mode.patch
deleted file mode 100644
index 2d7832744a..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0019-MLK-13609-ASoC-fsl_sai-fix-for-synchronize-mode.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 7b5c62dc6c1de58ee1d527059ae69152ed1380f2 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@freescale.com>
-Date: Mon, 12 Dec 2016 11:52:24 +0800
-Subject: [PATCH] MLK-13609: ASoC: fsl_sai: fix for synchronize mode
-
-TX synchronous with receiver: the RMR should not be changed and
-the RCSR.RE should be set in playback.
-RX synchronous with transmitter: the TMR should not be changed and
-the TCSR.TE should be set in recording.
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
----
- sound/soc/fsl/fsl_sai.c | 15 ++++++++-------
- 1 file changed, 8 insertions(+), 7 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -527,8 +527,6 @@ static int fsl_sai_hw_params(struct snd_
- 			regmap_update_bits(sai->regmap, FSL_SAI_TCR5,
- 				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
- 				FSL_SAI_CR5_FBT_MASK, val_cr5);
--			regmap_write(sai->regmap, FSL_SAI_TMR,
--				~0UL - ((1 << channels) - 1));
- 		} else if (!sai->synchronous[RX] && sai->synchronous[TX] && tx) {
- 			regmap_update_bits(sai->regmap, FSL_SAI_RCR4,
- 				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
-@@ -536,8 +534,6 @@ static int fsl_sai_hw_params(struct snd_
- 			regmap_update_bits(sai->regmap, FSL_SAI_RCR5,
- 				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
- 				FSL_SAI_CR5_FBT_MASK, val_cr5);
--			regmap_write(sai->regmap, FSL_SAI_RMR,
--				~0UL - ((1 << channels) - 1));
- 		}
- 	}
- 
-@@ -626,12 +622,17 @@ static int fsl_sai_trigger(struct snd_pc
- 		if (tx)
- 			udelay(10);
- 
--		regmap_update_bits(sai->regmap, FSL_SAI_TCSR,
--				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
--		regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
- 				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
- 		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
- 				   FSL_SAI_CSR_SE, FSL_SAI_CSR_SE);
-+		if (!sai->synchronous[TX] && sai->synchronous[RX] && !tx) {
-+			regmap_update_bits(sai->regmap, FSL_SAI_xCSR((!tx)),
-+				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
-+		} else if (!sai->synchronous[RX] && sai->synchronous[TX] && tx) {
-+			regmap_update_bits(sai->regmap, FSL_SAI_xCSR((!tx)),
-+				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
-+		}
- 
- 		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
- 				   FSL_SAI_CSR_xIE_MASK, FSL_SAI_FLAGS);
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0020-ASoC-fsl_-e-sai-introduce-shared-interrupt-DT-flag-p.patch b/target/linux/layerscape/patches-5.4/801-audio-0020-ASoC-fsl_-e-sai-introduce-shared-interrupt-DT-flag-p.patch
deleted file mode 100644
index 1184bce0e3..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0020-ASoC-fsl_-e-sai-introduce-shared-interrupt-DT-flag-p.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From a22b10e2c273308f547c5ad96e3820f312058ae7 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Sun, 30 Apr 2017 12:41:33 +0300
-Subject: [PATCH] ASoC: fsl_(e)sai: introduce "shared-interrupt" DT flag (part
- 2)
-
-SAI & ESAI interfaces may share the same interrupt with EDMA,
-so that we need a flag to trigger proper shared interrupt
-handling. For compatibility the same DT flag, "shared-interrupt",
-is introduced as the one used in drivers/dma/fsl-edma-v3.c.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
-[ Aisheng: split easi changes ]
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -910,6 +910,7 @@ static int fsl_sai_probe(struct platform
- 	char tmp[8];
- 	int irq, ret, i;
- 	int index;
-+	unsigned long irqflag = 0;
- 
- 	sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL);
- 	if (!sai)
-@@ -979,7 +980,12 @@ static int fsl_sai_probe(struct platform
- 		return irq;
- 	}
- 
--	ret = devm_request_irq(&pdev->dev, irq, fsl_sai_isr, 0, np->name, sai);
-+	/* SAI shared interrupt */
-+	if (of_property_read_bool(np, "shared-interrupt"))
-+		irqflag = IRQF_SHARED;
-+
-+	ret = devm_request_irq(&pdev->dev, irq, fsl_sai_isr, irqflag,
-+				np->name, sai);
- 	if (ret) {
- 		dev_err(&pdev->dev, "failed to claim irq %u\n", irq);
- 		return ret;
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0021-ASoC-fsl_sai-handle-slave-mode-per-TX-RX-direction.patch b/target/linux/layerscape/patches-5.4/801-audio-0021-ASoC-fsl_sai-handle-slave-mode-per-TX-RX-direction.patch
deleted file mode 100644
index 2fb5789ef3..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0021-ASoC-fsl_sai-handle-slave-mode-per-TX-RX-direction.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From 06d8069b308a1655e0c248b6bd556e63d9b38099 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Wed, 3 May 2017 10:16:02 +0300
-Subject: [PATCH] ASoC: fsl_sai: handle slave mode per TX/RX direction
-
-The SAI interface can be a clock supplier or consummer
-as function of stream direction, ie when interacting
-with I2S XTOR. Removed FSL_SAI_RFR define as it is now
-referred as FSL_SAI_RFR0.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 18 +++++++++---------
- sound/soc/fsl/fsl_sai.h |  3 +--
- 2 files changed, 10 insertions(+), 11 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -300,7 +300,7 @@ static int fsl_sai_set_dai_fmt_tr(struct
- 		return -EINVAL;
- 	}
- 
--	sai->is_slave_mode = false;
-+	sai->slave_mode[tx] = false;
- 
- 	/* DAI clock master masks */
- 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-@@ -310,7 +310,7 @@ static int fsl_sai_set_dai_fmt_tr(struct
- 		sai->is_slave_mode = false;
- 		break;
- 	case SND_SOC_DAIFMT_CBM_CFM:
--		sai->is_slave_mode = true;
-+		sai->slave_mode[tx] = true;
- 		break;
- 	case SND_SOC_DAIFMT_CBS_CFM:
- 		val_cr2 |= FSL_SAI_CR2_BCD_MSTR;
-@@ -318,7 +318,7 @@ static int fsl_sai_set_dai_fmt_tr(struct
- 		break;
- 	case SND_SOC_DAIFMT_CBM_CFS:
- 		val_cr4 |= FSL_SAI_CR4_FSD_MSTR;
--		sai->is_slave_mode = true;
-+		sai->slave_mode[tx] = true;
- 		break;
- 	default:
- 		return -EINVAL;
-@@ -359,7 +359,7 @@ static int fsl_sai_set_bclk(struct snd_s
- 	int ret = 0;
- 
- 	/* Don't apply to slave mode */
--	if (sai->is_slave_mode)
-+	if (sai->slave_mode[tx])
- 		return 0;
- 
- 	for (id = 0; id < FSL_SAI_MCLK_MAX; id++) {
-@@ -454,7 +454,7 @@ static int fsl_sai_hw_params(struct snd_
- 	if (sai->slot_width)
- 		slot_width = sai->slot_width;
- 
--	if (!sai->is_slave_mode) {
-+	if (!sai->slave_mode[tx]) {
- 		ret = fsl_sai_set_bclk(cpu_dai, tx,
- 				slots * slot_width * params_rate(params));
- 		if (ret)
-@@ -490,7 +490,7 @@ static int fsl_sai_hw_params(struct snd_
- 	 * error.
- 	 */
- 
--	if (!sai->is_slave_mode) {
-+	if (!sai->slave_mode[tx]) {
- 		if (!sai->synchronous[TX] && sai->synchronous[RX] && !tx) {
- 			regmap_update_bits(sai->regmap, FSL_SAI_TCR4,
- 				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
-@@ -519,7 +519,7 @@ static int fsl_sai_hw_params(struct snd_
- 	 * error.
- 	 */
- 
--	if (!sai->is_slave_mode) {
-+	if (!sai->slave_mode[tx]) {
- 		if (!sai->synchronous[TX] && sai->synchronous[RX] && !tx) {
- 			regmap_update_bits(sai->regmap, FSL_SAI_TCR4,
- 				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
-@@ -577,7 +577,7 @@ static int fsl_sai_hw_free(struct snd_pc
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 
--	if (!sai->is_slave_mode &&
-+	if (!sai->slave_mode[tx] &&
- 			sai->mclk_streams & BIT(substream->stream)) {
- 		clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[tx]]);
- 		sai->mclk_streams &= ~BIT(substream->stream);
-@@ -672,7 +672,7 @@ static int fsl_sai_trigger(struct snd_pc
- 			 * This is a hardware bug, and will be fix in the
- 			 * next sai version.
- 			 */
--			if (!sai->is_slave_mode) {
-+			if (!sai->slave_mode[tx]) {
- 				/* Software Reset for both Tx and Rx */
- 				regmap_write(sai->regmap,
- 					     FSL_SAI_TCSR, FSL_SAI_CSR_SR);
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -37,7 +37,6 @@
- #define FSL_SAI_RDR1    0xa4 /* SAI Receive Data */
- #define FSL_SAI_RFR0    0xc0 /* SAI Receive FIFO */
- #define FSL_SAI_RFR1    0xc4 /* SAI Receive FIFO */
--#define FSL_SAI_RFR	0xc0 /* SAI Receive FIFO */
- #define FSL_SAI_RMR	0xe0 /* SAI Receive Mask */
- 
- #define FSL_SAI_xCSR(tx)	(tx ? FSL_SAI_TCSR : FSL_SAI_RCSR)
-@@ -158,7 +157,7 @@ struct fsl_sai {
- 	struct clk *bus_clk;
- 	struct clk *mclk_clk[FSL_SAI_MCLK_MAX];
- 
--	bool is_slave_mode;
-+	bool slave_mode[2];
- 	bool is_lsb_first;
- 	bool is_dsp_mode;
- 	bool sai_on_imx;
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0022-ASoC-fsl_sai-set-specific-fmt-for-I2S-XTOR.patch b/target/linux/layerscape/patches-5.4/801-audio-0022-ASoC-fsl_sai-set-specific-fmt-for-I2S-XTOR.patch
deleted file mode 100644
index 84bf81ae64..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0022-ASoC-fsl_sai-set-specific-fmt-for-I2S-XTOR.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 307e37122cc14b5b305639c18ea575ebe623da2f Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Sun, 30 Apr 2017 17:05:52 +0300
-Subject: [PATCH] ASoC: fsl_sai: set specific fmt for I2S XTOR
-
-Set specific fmt, for i2s xtor receiver is
-in slave mode and i2s xtor transmitter is in master mode.
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 12 ++++++++++++
- sound/soc/fsl/fsl_sai.h |  2 +-
- 2 files changed, 13 insertions(+), 1 deletion(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -335,14 +335,23 @@ static int fsl_sai_set_dai_fmt_tr(struct
- 
- static int fsl_sai_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
- {
-+	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
- 	int ret;
- 
-+	if (sai->i2s_xtor)
-+		fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
-+		      SND_SOC_DAIFMT_CBS_CFS;
-+
- 	ret = fsl_sai_set_dai_fmt_tr(cpu_dai, fmt, FSL_FMT_TRANSMITTER);
- 	if (ret) {
- 		dev_err(cpu_dai->dev, "Cannot set tx format: %d\n", ret);
- 		return ret;
- 	}
- 
-+	if (sai->i2s_xtor)
-+		fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
-+		      SND_SOC_DAIFMT_CBM_CFM;
-+
- 	ret = fsl_sai_set_dai_fmt_tr(cpu_dai, fmt, FSL_FMT_RECEIVER);
- 	if (ret)
- 		dev_err(cpu_dai->dev, "Cannot set rx format: %d\n", ret);
-@@ -974,6 +983,9 @@ static int fsl_sai_probe(struct platform
- 		return -EINVAL;
- 	}
- 
-+	/* I2S XTOR mode */
-+	sai->i2s_xtor = (of_find_property(np, "fsl,i2s-xtor", NULL) != NULL);
-+
- 	irq = platform_get_irq(pdev, 0);
- 	if (irq < 0) {
- 		dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -160,7 +160,7 @@ struct fsl_sai {
- 	bool slave_mode[2];
- 	bool is_lsb_first;
- 	bool is_dsp_mode;
--	bool sai_on_imx;
-+	bool i2s_xtor;
- 	bool synchronous[2];
- 	bool is_stream_opened[2];
- 	unsigned int dataline[2];
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0024-MLK-14847-Revert-ASoC-fsl-sai-set-xCR4-xCR5-xMR-for-.patch b/target/linux/layerscape/patches-5.4/801-audio-0024-MLK-14847-Revert-ASoC-fsl-sai-set-xCR4-xCR5-xMR-for-.patch
deleted file mode 100644
index 1edd4a35ea..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0024-MLK-14847-Revert-ASoC-fsl-sai-set-xCR4-xCR5-xMR-for-.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 060265cd3cec354804c0c944e42de83cec9f2f2a Mon Sep 17 00:00:00 2001
-From: Mihai Serban <mihai.serban@nxp.com>
-Date: Fri, 21 Apr 2017 15:57:58 +0300
-Subject: [PATCH] MLK-14847: Revert "ASoC: fsl-sai: set xCR4/xCR5/xMR for SAI
- master mode"
-
-This reverts commit c768ed336bba ("ASoC: fsl-sai: set xCR4/xCR5/xMR for
-SAI master mode")
-
-This change was already introduced by commit 51659ca069ce ("ASoC: fsl-sai:
-set xCR4/xCR5/xMR for SAI master mode") from upstream.
-
-Manually adjust the code to match the changes introduced by subsequent
-commit b2936555bb38 ("MLK-13609: ASoC: fsl_sai: fix for synchronize mode")
-by removing updates to FSL_SAI_TMR/FSL_SAI_RMR registers.
-
-Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 29 -----------------------------
- 1 file changed, 29 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -507,35 +507,6 @@ static int fsl_sai_hw_params(struct snd_
- 			regmap_update_bits(sai->regmap, FSL_SAI_TCR5,
- 				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
- 				FSL_SAI_CR5_FBT_MASK, val_cr5);
--			regmap_write(sai->regmap, FSL_SAI_TMR,
--				~0UL - ((1 << channels) - 1));
--		} else if (!sai->synchronous[RX] && sai->synchronous[TX] && tx) {
--			regmap_update_bits(sai->regmap, FSL_SAI_RCR4,
--				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
--				val_cr4);
--			regmap_update_bits(sai->regmap, FSL_SAI_RCR5,
--				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
--				FSL_SAI_CR5_FBT_MASK, val_cr5);
--			regmap_write(sai->regmap, FSL_SAI_RMR,
--				~0UL - ((1 << channels) - 1));
--		}
--	}
--
--	/*
--	 * For SAI master mode, when Tx(Rx) sync with Rx(Tx) clock, Rx(Tx) will
--	 * generate bclk and frame clock for Tx(Rx), we should set RCR4(TCR4),
--	 * RCR5(TCR5) and RMR(TMR) for playback(capture), or there will be sync
--	 * error.
--	 */
--
--	if (!sai->slave_mode[tx]) {
--		if (!sai->synchronous[TX] && sai->synchronous[RX] && !tx) {
--			regmap_update_bits(sai->regmap, FSL_SAI_TCR4,
--				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
--				val_cr4);
--			regmap_update_bits(sai->regmap, FSL_SAI_TCR5,
--				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
--				FSL_SAI_CR5_FBT_MASK, val_cr5);
- 		} else if (!sai->synchronous[RX] && sai->synchronous[TX] && tx) {
- 			regmap_update_bits(sai->regmap, FSL_SAI_RCR4,
- 				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0025-MLK-14870-ASoC-fsl_sai-Remove-support-for-S20_3LE.patch b/target/linux/layerscape/patches-5.4/801-audio-0025-MLK-14870-ASoC-fsl_sai-Remove-support-for-S20_3LE.patch
deleted file mode 100644
index e497705f8f..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0025-MLK-14870-ASoC-fsl_sai-Remove-support-for-S20_3LE.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 1a3b5fa78e710771c44450735439d5f5fd156141 Mon Sep 17 00:00:00 2001
-From: Daniel Baluta <daniel.baluta@nxp.com>
-Date: Wed, 10 May 2017 14:21:40 +0300
-Subject: [PATCH] MLK-14870: ASoC: fsl_sai: Remove support for S20_3LE
-
-With current clock configuration we cannot derive bitclk for S20_3LE
-format in SAI master mode. There was an attempt to fix this in commit
-65e6b5f1b4a7 ("MLK-14536: ASoC: wm8960: Fix playback in CPU DAI master mode")
-but this broke codec-master mode, thus the patch was partially reverted in
-96f0d36e420 ("MLK-14798: arm: dts: imx6ul: Fix wm8960 codec master mode")
-
-So, remove S20_3LE support for SAI master mode. Clients using this
-feature should use codec master mode, which is the default one in the
-dts anyway.
-
-Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
----
- sound/soc/fsl/fsl_sai.h | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -10,7 +10,6 @@
- #include <sound/dmaengine_pcm.h>
- 
- #define FSL_SAI_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
--			 SNDRV_PCM_FMTBIT_S20_3LE |\
- 			 SNDRV_PCM_FMTBIT_S24_LE |\
- 			 SNDRV_PCM_FMTBIT_S32_LE)
- 
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0026-MLK-14935-ASoC-fsl_sai-Fix-mixing-initialization-dat.patch b/target/linux/layerscape/patches-5.4/801-audio-0026-MLK-14935-ASoC-fsl_sai-Fix-mixing-initialization-dat.patch
deleted file mode 100644
index a68985fa02..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0026-MLK-14935-ASoC-fsl_sai-Fix-mixing-initialization-dat.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 96412158397ca0e41db1eb7cec4f51a2280d1bf1 Mon Sep 17 00:00:00 2001
-From: Mihai Serban <mihai.serban@nxp.com>
-Date: Thu, 27 Apr 2017 18:47:42 +0300
-Subject: [PATCH] MLK-14935: ASoC: fsl_sai: Fix mixing initialization data with
- actual audio samples
-
-When starting a playback the initialization data used to reduce underruns
-was send to the transmit data register after the DMA requests were enabled.
-This patch moves the initialization phase before enabling the DMA so the
-data is transmitted in correct order.
-
-Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -594,15 +594,14 @@ static int fsl_sai_trigger(struct snd_pc
- 	case SNDRV_PCM_TRIGGER_START:
- 	case SNDRV_PCM_TRIGGER_RESUME:
- 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
--		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
--				   FSL_SAI_CSR_FRDE, FSL_SAI_CSR_FRDE);
--
- 		for (i = 0; tx && i < channels; i++)
- 			regmap_write(sai->regmap, FSL_SAI_TDR0, 0x0);
- 		if (tx)
- 			udelay(10);
- 
- 		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
-+				   FSL_SAI_CSR_FRDE, FSL_SAI_CSR_FRDE);
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
- 				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
- 		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
- 				   FSL_SAI_CSR_SE, FSL_SAI_CSR_SE);
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0027-MLK-15140-1-ASoC-fsl_sai-support-latest-sai-module.patch b/target/linux/layerscape/patches-5.4/801-audio-0027-MLK-15140-1-ASoC-fsl_sai-support-latest-sai-module.patch
deleted file mode 100644
index f0063453d5..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0027-MLK-15140-1-ASoC-fsl_sai-support-latest-sai-module.patch
+++ /dev/null
@@ -1,701 +0,0 @@
-From 21cf15cd000ba45bc02b8bfcf59df1e13bfdb803 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@freescale.com>
-Date: Thu, 22 Jun 2017 15:39:24 +0800
-Subject: [PATCH] MLK-15140-1: ASoC: fsl_sai: support latest sai module
-
-The version of sai is upgrate in imx8mq, which add two register
-in beginning, there is VERID and PARAM. the driver need to be
-update
-
-Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
-Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
----
- sound/soc/fsl/fsl_sai.c | 273 ++++++++++++++++++++++++++++--------------------
- sound/soc/fsl/fsl_sai.h |  43 ++++----
- 2 files changed, 180 insertions(+), 136 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -43,6 +43,7 @@ static struct fsl_sai_soc_data fsl_sai_i
- 	.fifos = 1,
- 	.fifo_depth = 32,
- 	.flags = 0,
-+	.reg_offset = 0,
- };
- 
- static struct fsl_sai_soc_data fsl_sai_imx6ul = {
-@@ -51,6 +52,7 @@ static struct fsl_sai_soc_data fsl_sai_i
- 	.fifos = 1,
- 	.fifo_depth = 32,
- 	.flags = 0,
-+	.reg_offset = 0,
- };
- 
- static struct fsl_sai_soc_data fsl_sai_imx7ulp = {
-@@ -59,6 +61,16 @@ static struct fsl_sai_soc_data fsl_sai_i
- 	.fifos = 2,
- 	.fifo_depth = 16,
- 	.flags = SAI_FLAG_PMQOS,
-+	.reg_offset = 0,
-+};
-+
-+static struct fsl_sai_soc_data fsl_sai_imx8mq = {
-+	.imx = true,
-+	.dataline = 0xff,
-+	.fifos = 8,
-+	.fifo_depth = 32,
-+	.flags = 0,
-+	.reg_offset = 8,
- };
- 
- static const unsigned int fsl_sai_rates[] = {
-@@ -75,6 +87,7 @@ static const struct snd_pcm_hw_constrain
- static irqreturn_t fsl_sai_isr(int irq, void *devid)
- {
- 	struct fsl_sai *sai = (struct fsl_sai *)devid;
-+	unsigned char offset = sai->soc->reg_offset;
- 	struct device *dev = &sai->pdev->dev;
- 	u32 flags, xcsr, mask;
- 	bool irq_none = true;
-@@ -87,7 +100,7 @@ static irqreturn_t fsl_sai_isr(int irq,
- 	mask = (FSL_SAI_FLAGS >> FSL_SAI_CSR_xIE_SHIFT) << FSL_SAI_CSR_xF_SHIFT;
- 
- 	/* Tx IRQ */
--	regmap_read(sai->regmap, FSL_SAI_TCSR, &xcsr);
-+	regmap_read(sai->regmap, FSL_SAI_TCSR(offset), &xcsr);
- 	flags = xcsr & mask;
- 
- 	if (flags)
-@@ -117,11 +130,11 @@ static irqreturn_t fsl_sai_isr(int irq,
- 	xcsr &= ~FSL_SAI_CSR_xF_MASK;
- 
- 	if (flags)
--		regmap_write(sai->regmap, FSL_SAI_TCSR, flags | xcsr);
-+		regmap_write(sai->regmap, FSL_SAI_TCSR(offset), flags | xcsr);
- 
- irq_rx:
- 	/* Rx IRQ */
--	regmap_read(sai->regmap, FSL_SAI_RCSR, &xcsr);
-+	regmap_read(sai->regmap, FSL_SAI_RCSR(offset), &xcsr);
- 	flags = xcsr & mask;
- 
- 	if (flags)
-@@ -151,7 +164,7 @@ irq_rx:
- 	xcsr &= ~FSL_SAI_CSR_xF_MASK;
- 
- 	if (flags)
--		regmap_write(sai->regmap, FSL_SAI_RCSR, flags | xcsr);
-+		regmap_write(sai->regmap, FSL_SAI_RCSR(offset), flags | xcsr);
- 
- out:
- 	if (irq_none)
-@@ -175,6 +188,7 @@ static int fsl_sai_set_dai_sysclk_tr(str
- 		int clk_id, unsigned int freq, int fsl_dir)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
-+	unsigned char offset = sai->soc->reg_offset;
- 	bool tx = fsl_dir == FSL_FMT_TRANSMITTER;
- 	u32 val_cr2 = 0;
- 
-@@ -195,7 +209,7 @@ static int fsl_sai_set_dai_sysclk_tr(str
- 		return -EINVAL;
- 	}
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx),
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, offset),
- 			   FSL_SAI_CR2_MSEL_MASK, val_cr2);
- 
- 	return 0;
-@@ -228,6 +242,7 @@ static int fsl_sai_set_dai_fmt_tr(struct
- 				unsigned int fmt, int fsl_dir)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
-+	unsigned char offset = sai->soc->reg_offset;
- 	bool tx = fsl_dir == FSL_FMT_TRANSMITTER;
- 	u32 val_cr2 = 0, val_cr4 = 0;
- 
-@@ -324,9 +339,9 @@ static int fsl_sai_set_dai_fmt_tr(struct
- 		return -EINVAL;
- 	}
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx),
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, offset),
- 			   FSL_SAI_CR2_BCP | FSL_SAI_CR2_BCD_MSTR, val_cr2);
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, offset),
- 			   FSL_SAI_CR4_MF | FSL_SAI_CR4_FSE |
- 			   FSL_SAI_CR4_FSP | FSL_SAI_CR4_FSD_MSTR, val_cr4);
- 
-@@ -362,6 +377,7 @@ static int fsl_sai_set_dai_fmt(struct sn
- static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai);
-+	unsigned char offset = sai->soc->reg_offset;
- 	unsigned long clk_rate;
- 	u32 savediv = 0, ratio, savesub = freq;
- 	u32 id;
-@@ -424,17 +440,17 @@ static int fsl_sai_set_bclk(struct snd_s
- 	 */
- 	if ((sai->synchronous[TX] && !sai->synchronous[RX]) ||
- 	    (!tx && !sai->synchronous[RX])) {
--		regmap_update_bits(sai->regmap, FSL_SAI_RCR2,
-+		regmap_update_bits(sai->regmap, FSL_SAI_RCR2(offset),
- 				   FSL_SAI_CR2_MSEL_MASK,
- 				   FSL_SAI_CR2_MSEL(sai->mclk_id[tx]));
--		regmap_update_bits(sai->regmap, FSL_SAI_RCR2,
-+		regmap_update_bits(sai->regmap, FSL_SAI_RCR2(offset),
- 				   FSL_SAI_CR2_DIV_MASK, savediv - 1);
- 	} else if ((sai->synchronous[RX] && !sai->synchronous[TX]) ||
- 		   (tx && !sai->synchronous[TX])) {
--		regmap_update_bits(sai->regmap, FSL_SAI_TCR2,
-+		regmap_update_bits(sai->regmap, FSL_SAI_TCR2(offset),
- 				   FSL_SAI_CR2_MSEL_MASK,
- 				   FSL_SAI_CR2_MSEL(sai->mclk_id[tx]));
--		regmap_update_bits(sai->regmap, FSL_SAI_TCR2,
-+		regmap_update_bits(sai->regmap, FSL_SAI_TCR2(offset),
- 				   FSL_SAI_CR2_DIV_MASK, savediv - 1);
- 	}
- 
-@@ -449,6 +465,7 @@ static int fsl_sai_hw_params(struct snd_
- 		struct snd_soc_dai *cpu_dai)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
-+	unsigned char offset = sai->soc->reg_offset;
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 	unsigned int channels = params_channels(params);
- 	u32 word_width = params_width(params);
-@@ -501,49 +518,35 @@ static int fsl_sai_hw_params(struct snd_
- 
- 	if (!sai->slave_mode[tx]) {
- 		if (!sai->synchronous[TX] && sai->synchronous[RX] && !tx) {
--			regmap_update_bits(sai->regmap, FSL_SAI_TCR4,
-+			regmap_update_bits(sai->regmap, FSL_SAI_TCR4(offset),
- 				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
- 				val_cr4);
--			regmap_update_bits(sai->regmap, FSL_SAI_TCR5,
-+			regmap_update_bits(sai->regmap, FSL_SAI_TCR5(offset),
- 				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
- 				FSL_SAI_CR5_FBT_MASK, val_cr5);
- 		} else if (!sai->synchronous[RX] && sai->synchronous[TX] && tx) {
--			regmap_update_bits(sai->regmap, FSL_SAI_RCR4,
-+			regmap_update_bits(sai->regmap, FSL_SAI_RCR4(offset),
- 				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
- 				val_cr4);
--			regmap_update_bits(sai->regmap, FSL_SAI_RCR5,
-+			regmap_update_bits(sai->regmap, FSL_SAI_RCR5(offset),
- 				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
- 				FSL_SAI_CR5_FBT_MASK, val_cr5);
- 		}
- 	}
- 
- 	if (sai->soc->dataline != 0x1) {
--		switch (sai->dataline[tx]) {
--		case 0x0:
--			break;
--		case 0x1:
--			regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
--				FSL_SAI_CR4_FCOMB_SOFT | FSL_SAI_CR4_FCOMB_SHIFT, 0);
--			break;
--		case 0x2:
--			regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
--				FSL_SAI_CR4_FCOMB_SOFT | FSL_SAI_CR4_FCOMB_SHIFT,
--				FSL_SAI_CR4_FCOMB_SOFT | FSL_SAI_CR4_FCOMB_SHIFT);
--			break;
--		case 0x3:
--			regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
--				FSL_SAI_CR4_FCOMB_SOFT | FSL_SAI_CR4_FCOMB_SHIFT,
--				FSL_SAI_CR4_FCOMB_SOFT);
--			break;
--		default:
--			break;
--		}
-+		if (sai->dataline[tx] <= 1)
-+			regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, offset),
-+				FSL_SAI_CR4_FCOMB_MASK, 0);
-+		else
-+			regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, offset),
-+				FSL_SAI_CR4_FCOMB_MASK, FSL_SAI_CR4_FCOMB_SOFT);
- 	}
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx),
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, offset),
- 			   FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
- 			   val_cr4);
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx),
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx, offset),
- 			   FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
- 			   FSL_SAI_CR5_FBT_MASK, val_cr5);
- 	regmap_write(sai->regmap, FSL_SAI_xMR(tx), ~0UL - ((1 << channels) - 1));
-@@ -571,6 +574,7 @@ static int fsl_sai_trigger(struct snd_pc
- 		struct snd_soc_dai *cpu_dai)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
-+	unsigned char offset = sai->soc->reg_offset;
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 	u8 channels = substream->runtime->channels;
- 	u32 xcsr, count = 100;
-@@ -581,9 +585,9 @@ static int fsl_sai_trigger(struct snd_pc
- 	 * Rx sync with Tx clocks: Clear SYNC for Tx, set it for Rx.
- 	 * Tx sync with Rx clocks: Clear SYNC for Rx, set it for Tx.
- 	 */
--	regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC,
-+	regmap_update_bits(sai->regmap, FSL_SAI_TCR2(offset), FSL_SAI_CR2_SYNC,
- 		           sai->synchronous[TX] ? FSL_SAI_CR2_SYNC : 0);
--	regmap_update_bits(sai->regmap, FSL_SAI_RCR2, FSL_SAI_CR2_SYNC,
-+	regmap_update_bits(sai->regmap, FSL_SAI_RCR2(offset), FSL_SAI_CR2_SYNC,
- 			   sai->synchronous[RX] ? FSL_SAI_CR2_SYNC : 0);
- 
- 	/*
-@@ -599,49 +603,50 @@ static int fsl_sai_trigger(struct snd_pc
- 		if (tx)
- 			udelay(10);
- 
--		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, offset),
- 				   FSL_SAI_CSR_FRDE, FSL_SAI_CSR_FRDE);
--		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
-+
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, offset),
- 				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
--		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, offset),
- 				   FSL_SAI_CSR_SE, FSL_SAI_CSR_SE);
- 		if (!sai->synchronous[TX] && sai->synchronous[RX] && !tx) {
--			regmap_update_bits(sai->regmap, FSL_SAI_xCSR((!tx)),
-+			regmap_update_bits(sai->regmap, FSL_SAI_xCSR((!tx), offset),
- 				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
- 		} else if (!sai->synchronous[RX] && sai->synchronous[TX] && tx) {
--			regmap_update_bits(sai->regmap, FSL_SAI_xCSR((!tx)),
-+			regmap_update_bits(sai->regmap, FSL_SAI_xCSR((!tx), offset),
- 				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
- 		}
- 
--		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, offset),
- 				   FSL_SAI_CSR_xIE_MASK, FSL_SAI_FLAGS);
- 		break;
- 	case SNDRV_PCM_TRIGGER_STOP:
- 	case SNDRV_PCM_TRIGGER_SUSPEND:
- 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
--		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, offset),
- 				   FSL_SAI_CSR_FRDE, 0);
--		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, offset),
- 				   FSL_SAI_CSR_xIE_MASK, 0);
- 
- 		/* Check if the opposite FRDE is also disabled */
--		regmap_read(sai->regmap, FSL_SAI_xCSR(!tx), &xcsr);
-+		regmap_read(sai->regmap, FSL_SAI_xCSR(!tx, offset), &xcsr);
- 		if (!(xcsr & FSL_SAI_CSR_FRDE)) {
- 			/* Disable both directions and reset their FIFOs */
--			regmap_update_bits(sai->regmap, FSL_SAI_TCSR,
-+			regmap_update_bits(sai->regmap, FSL_SAI_TCSR(offset),
- 					   FSL_SAI_CSR_TERE, 0);
--			regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
-+			regmap_update_bits(sai->regmap, FSL_SAI_RCSR(offset),
- 					   FSL_SAI_CSR_TERE, 0);
- 
- 			/* TERE will remain set till the end of current frame */
- 			do {
- 				udelay(10);
--				regmap_read(sai->regmap, FSL_SAI_xCSR(tx), &xcsr);
-+				regmap_read(sai->regmap, FSL_SAI_xCSR(tx, offset), &xcsr);
- 			} while (--count && xcsr & FSL_SAI_CSR_TERE);
- 
--			regmap_update_bits(sai->regmap, FSL_SAI_TCSR,
-+			regmap_update_bits(sai->regmap, FSL_SAI_TCSR(offset),
- 					   FSL_SAI_CSR_FR, FSL_SAI_CSR_FR);
--			regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
-+			regmap_update_bits(sai->regmap, FSL_SAI_RCSR(offset),
- 					   FSL_SAI_CSR_FR, FSL_SAI_CSR_FR);
- 
- 			/*
-@@ -654,12 +659,12 @@ static int fsl_sai_trigger(struct snd_pc
- 			if (!sai->slave_mode[tx]) {
- 				/* Software Reset for both Tx and Rx */
- 				regmap_write(sai->regmap,
--					     FSL_SAI_TCSR, FSL_SAI_CSR_SR);
-+					     FSL_SAI_TCSR(offset), FSL_SAI_CSR_SR);
- 				regmap_write(sai->regmap,
--					     FSL_SAI_RCSR, FSL_SAI_CSR_SR);
-+					     FSL_SAI_RCSR(offset), FSL_SAI_CSR_SR);
- 				/* Clear SR bit to finish the reset */
--				regmap_write(sai->regmap, FSL_SAI_TCSR, 0);
--				regmap_write(sai->regmap, FSL_SAI_RCSR, 0);
-+				regmap_write(sai->regmap, FSL_SAI_TCSR(offset), 0);
-+				regmap_write(sai->regmap, FSL_SAI_RCSR(offset), 0);
- 			}
- 		}
- 		break;
-@@ -674,6 +679,7 @@ static int fsl_sai_startup(struct snd_pc
- 		struct snd_soc_dai *cpu_dai)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
-+	unsigned char offset = sai->soc->reg_offset;
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 	int ret;
- 
-@@ -682,7 +688,8 @@ static int fsl_sai_startup(struct snd_pc
- 	else
- 		sai->is_stream_opened[tx] = true;
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE0|FSL_SAI_CR3_TRCE1,
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
-+			   FSL_SAI_CR3_TRCE_MASK,
- 			   FSL_SAI_CR3_TRCE(sai->dataline[tx]));
- 
- 	ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
-@@ -695,12 +702,14 @@ static void fsl_sai_shutdown(struct snd_
- 		struct snd_soc_dai *cpu_dai)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
-+	unsigned char offset = sai->soc->reg_offset;
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 
- 	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, 0);
- 
- 	if (sai->is_stream_opened[tx]) {
--		regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE0 | FSL_SAI_CR3_TRCE1, 0);
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
-+				   FSL_SAI_CR3_TRCE_MASK, 0);
- 		sai->is_stream_opened[tx] = false;
- 	}
- }
-@@ -719,17 +728,18 @@ static const struct snd_soc_dai_ops fsl_
- static int fsl_sai_dai_probe(struct snd_soc_dai *cpu_dai)
- {
- 	struct fsl_sai *sai = dev_get_drvdata(cpu_dai->dev);
-+	unsigned char offset = sai->soc->reg_offset;
- 
- 	/* Software Reset for both Tx and Rx */
--	regmap_write(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_SR);
--	regmap_write(sai->regmap, FSL_SAI_RCSR, FSL_SAI_CSR_SR);
-+	regmap_write(sai->regmap, FSL_SAI_TCSR(offset), FSL_SAI_CSR_SR);
-+	regmap_write(sai->regmap, FSL_SAI_RCSR(offset), FSL_SAI_CSR_SR);
- 	/* Clear SR bit to finish the reset */
--	regmap_write(sai->regmap, FSL_SAI_TCSR, 0);
--	regmap_write(sai->regmap, FSL_SAI_RCSR, 0);
-+	regmap_write(sai->regmap, FSL_SAI_TCSR(offset), 0);
-+	regmap_write(sai->regmap, FSL_SAI_RCSR(offset), 0);
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_TCR1, FSL_SAI_CR1_RFW_MASK,
-+	regmap_update_bits(sai->regmap, FSL_SAI_TCR1(offset), FSL_SAI_CR1_RFW_MASK,
- 			   sai->soc->fifo_depth - FSL_SAI_MAXBURST_TX);
--	regmap_update_bits(sai->regmap, FSL_SAI_RCR1, FSL_SAI_CR1_RFW_MASK,
-+	regmap_update_bits(sai->regmap, FSL_SAI_RCR1(offset), FSL_SAI_CR1_RFW_MASK,
- 			   FSL_SAI_MAXBURST_RX - 1);
- 
- 	snd_soc_dai_init_dma_data(cpu_dai, &sai->dma_params_tx,
-@@ -767,41 +777,55 @@ static const struct snd_soc_component_dr
- 	.name           = "fsl-sai",
- };
- 
--static struct reg_default fsl_sai_reg_defaults[] = {
--	{FSL_SAI_TCR1, 0},
--	{FSL_SAI_TCR2, 0},
--	{FSL_SAI_TCR3, 0},
--	{FSL_SAI_TCR4, 0},
--	{FSL_SAI_TCR5, 0},
-+static struct reg_default fsl_sai_v2_reg_defaults[] = {
-+	{FSL_SAI_TCR1(0), 0},
-+	{FSL_SAI_TCR2(0), 0},
-+	{FSL_SAI_TCR3(0), 0},
-+	{FSL_SAI_TCR4(0), 0},
-+	{FSL_SAI_TCR5(0), 0},
-+	{FSL_SAI_TDR0, 0},
-+	{FSL_SAI_TDR1, 0},
-+	{FSL_SAI_TMR,  0},
-+	{FSL_SAI_RCR1(0), 0},
-+	{FSL_SAI_RCR2(0), 0},
-+	{FSL_SAI_RCR3(0), 0},
-+	{FSL_SAI_RCR4(0), 0},
-+	{FSL_SAI_RCR5(0), 0},
-+	{FSL_SAI_RMR,  0},
-+};
-+
-+static struct reg_default fsl_sai_v3_reg_defaults[] = {
-+	{FSL_SAI_TCR1(8), 0},
-+	{FSL_SAI_TCR2(8), 0},
-+	{FSL_SAI_TCR3(8), 0},
-+	{FSL_SAI_TCR4(8), 0},
-+	{FSL_SAI_TCR5(8), 0},
- 	{FSL_SAI_TDR0, 0},
- 	{FSL_SAI_TDR1, 0},
- 	{FSL_SAI_TMR,  0},
--	{FSL_SAI_RCR1, 0},
--	{FSL_SAI_RCR2, 0},
--	{FSL_SAI_RCR3, 0},
--	{FSL_SAI_RCR4, 0},
--	{FSL_SAI_RCR5, 0},
-+	{FSL_SAI_RCR1(8), 0},
-+	{FSL_SAI_RCR2(8), 0},
-+	{FSL_SAI_RCR3(8), 0},
-+	{FSL_SAI_RCR4(8), 0},
-+	{FSL_SAI_RCR5(8), 0},
- 	{FSL_SAI_RMR,  0},
- };
- 
- static bool fsl_sai_readable_reg(struct device *dev, unsigned int reg)
- {
-+	struct fsl_sai *sai = dev_get_drvdata(dev);
-+	unsigned char offset = sai->soc->reg_offset;
-+
-+	if (reg >= FSL_SAI_TCSR(offset) && reg <= FSL_SAI_TCR5(offset))
-+		return true;
-+
-+	if (reg >= FSL_SAI_RCSR(offset) && reg <= FSL_SAI_RCR5(offset))
-+		return true;
-+
- 	switch (reg) {
--	case FSL_SAI_TCSR:
--	case FSL_SAI_TCR1:
--	case FSL_SAI_TCR2:
--	case FSL_SAI_TCR3:
--	case FSL_SAI_TCR4:
--	case FSL_SAI_TCR5:
- 	case FSL_SAI_TFR0:
- 	case FSL_SAI_TFR1:
- 	case FSL_SAI_TMR:
--	case FSL_SAI_RCSR:
--	case FSL_SAI_RCR1:
--	case FSL_SAI_RCR2:
--	case FSL_SAI_RCR3:
--	case FSL_SAI_RCR4:
--	case FSL_SAI_RCR5:
- 	case FSL_SAI_RDR0:
- 	case FSL_SAI_RDR1:
- 	case FSL_SAI_RFR0:
-@@ -815,9 +839,13 @@ static bool fsl_sai_readable_reg(struct
- 
- static bool fsl_sai_volatile_reg(struct device *dev, unsigned int reg)
- {
-+	struct fsl_sai *sai = dev_get_drvdata(dev);
-+	unsigned char offset = sai->soc->reg_offset;
-+
-+	if (reg == FSL_SAI_TCSR(offset) || reg == FSL_SAI_RCSR(offset))
-+		return true;
-+
- 	switch (reg) {
--	case FSL_SAI_TCSR:
--	case FSL_SAI_RCSR:
- 	case FSL_SAI_TFR0:
- 	case FSL_SAI_TFR1:
- 	case FSL_SAI_RFR0:
-@@ -832,22 +860,19 @@ static bool fsl_sai_volatile_reg(struct
- 
- static bool fsl_sai_writeable_reg(struct device *dev, unsigned int reg)
- {
-+	struct fsl_sai *sai = dev_get_drvdata(dev);
-+	unsigned char offset = sai->soc->reg_offset;
-+
-+	if (reg >= FSL_SAI_TCSR(offset) && reg <= FSL_SAI_TCR5(offset))
-+		return true;
-+
-+	if (reg >= FSL_SAI_RCSR(offset) && reg <= FSL_SAI_RCR5(offset))
-+		return true;
-+
- 	switch (reg) {
--	case FSL_SAI_TCSR:
--	case FSL_SAI_TCR1:
--	case FSL_SAI_TCR2:
--	case FSL_SAI_TCR3:
--	case FSL_SAI_TCR4:
--	case FSL_SAI_TCR5:
- 	case FSL_SAI_TDR0:
- 	case FSL_SAI_TDR1:
- 	case FSL_SAI_TMR:
--	case FSL_SAI_RCSR:
--	case FSL_SAI_RCR1:
--	case FSL_SAI_RCR2:
--	case FSL_SAI_RCR3:
--	case FSL_SAI_RCR4:
--	case FSL_SAI_RCR5:
- 	case FSL_SAI_RMR:
- 		return true;
- 	default:
-@@ -855,14 +880,28 @@ static bool fsl_sai_writeable_reg(struct
- 	}
- }
- 
--static const struct regmap_config fsl_sai_regmap_config = {
-+static const struct regmap_config fsl_sai_v2_regmap_config = {
- 	.reg_bits = 32,
- 	.reg_stride = 4,
- 	.val_bits = 32,
- 
- 	.max_register = FSL_SAI_RMR,
--	.reg_defaults = fsl_sai_reg_defaults,
--	.num_reg_defaults = ARRAY_SIZE(fsl_sai_reg_defaults),
-+	.reg_defaults = fsl_sai_v2_reg_defaults,
-+	.num_reg_defaults = ARRAY_SIZE(fsl_sai_v2_reg_defaults),
-+	.readable_reg = fsl_sai_readable_reg,
-+	.volatile_reg = fsl_sai_volatile_reg,
-+	.writeable_reg = fsl_sai_writeable_reg,
-+	.cache_type = REGCACHE_FLAT,
-+};
-+
-+static const struct regmap_config fsl_sai_v3_regmap_config = {
-+	.reg_bits = 32,
-+	.reg_stride = 4,
-+	.val_bits = 32,
-+
-+	.max_register = FSL_SAI_RMR,
-+	.reg_defaults = fsl_sai_v3_reg_defaults,
-+	.num_reg_defaults = ARRAY_SIZE(fsl_sai_v3_reg_defaults),
- 	.readable_reg = fsl_sai_readable_reg,
- 	.volatile_reg = fsl_sai_volatile_reg,
- 	.writeable_reg = fsl_sai_writeable_reg,
-@@ -874,6 +913,7 @@ static const struct of_device_id fsl_sai
- 	{ .compatible = "fsl,imx6sx-sai", .data = &fsl_sai_imx6sx },
- 	{ .compatible = "fsl,imx6ul-sai", .data = &fsl_sai_imx6ul },
- 	{ .compatible = "fsl,imx7ulp-sai", .data = &fsl_sai_imx7ulp },
-+	{ .compatible = "fsl,imx8mq-sai", .data = &fsl_sai_imx8mq },
- 	{ /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, fsl_sai_ids);
-@@ -889,7 +929,8 @@ static int fsl_sai_probe(struct platform
- 	char tmp[8];
- 	int irq, ret, i;
- 	int index;
--	unsigned long irqflag = 0;
-+	struct regmap_config fsl_sai_regmap_config = fsl_sai_v2_regmap_config;
-+	unsigned long irqflags = 0;
- 
- 	sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL);
- 	if (!sai)
-@@ -909,6 +950,9 @@ static int fsl_sai_probe(struct platform
- 	if (IS_ERR(base))
- 		return PTR_ERR(base);
- 
-+	if (sai->soc->reg_offset == 8)
-+		fsl_sai_regmap_config = fsl_sai_v3_regmap_config;
-+
- 	sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
- 			"bus", base, &fsl_sai_regmap_config);
- 
-@@ -963,11 +1007,11 @@ static int fsl_sai_probe(struct platform
- 	}
- 
- 	/* SAI shared interrupt */
--	if (of_property_read_bool(np, "shared-interrupt"))
--		irqflag = IRQF_SHARED;
-+	if (of_property_read_bool(np, "fsl,shared-interrupt"))
-+		irqflags = IRQF_SHARED;
- 
--	ret = devm_request_irq(&pdev->dev, irq, fsl_sai_isr, irqflag,
--				np->name, sai);
-+	ret = devm_request_irq(&pdev->dev, irq, fsl_sai_isr, irqflags, np->name,
-+			       sai);
- 	if (ret) {
- 		dev_err(&pdev->dev, "failed to claim irq %u\n", irq);
- 		return ret;
-@@ -1091,6 +1135,7 @@ static int fsl_sai_runtime_suspend(struc
- static int fsl_sai_runtime_resume(struct device *dev)
- {
- 	struct fsl_sai *sai = dev_get_drvdata(dev);
-+	unsigned char offset = sai->soc->reg_offset;
- 	int ret;
- 
- 	ret = clk_prepare_enable(sai->bus_clk);
-@@ -1116,11 +1161,11 @@ static int fsl_sai_runtime_resume(struct
- 				PM_QOS_CPU_DMA_LATENCY, 0);
- 
- 	regcache_cache_only(sai->regmap, false);
--	regmap_write(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_SR);
--	regmap_write(sai->regmap, FSL_SAI_RCSR, FSL_SAI_CSR_SR);
-+	regmap_write(sai->regmap, FSL_SAI_TCSR(offset), FSL_SAI_CSR_SR);
-+	regmap_write(sai->regmap, FSL_SAI_RCSR(offset), FSL_SAI_CSR_SR);
- 	usleep_range(1000, 2000);
--	regmap_write(sai->regmap, FSL_SAI_TCSR, 0);
--	regmap_write(sai->regmap, FSL_SAI_RCSR, 0);
-+	regmap_write(sai->regmap, FSL_SAI_TCSR(offset), 0);
-+	regmap_write(sai->regmap, FSL_SAI_RCSR(offset), 0);
- 
- 	ret = regcache_sync(sai->regmap);
- 	if (ret)
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -14,38 +14,36 @@
- 			 SNDRV_PCM_FMTBIT_S32_LE)
- 
- /* SAI Register Map Register */
--#define FSL_SAI_TCSR	0x00 /* SAI Transmit Control */
--#define FSL_SAI_TCR1	0x04 /* SAI Transmit Configuration 1 */
--#define FSL_SAI_TCR2	0x08 /* SAI Transmit Configuration 2 */
--#define FSL_SAI_TCR3	0x0c /* SAI Transmit Configuration 3 */
--#define FSL_SAI_TCR4	0x10 /* SAI Transmit Configuration 4 */
--#define FSL_SAI_TCR5	0x14 /* SAI Transmit Configuration 5 */
-+#define FSL_SAI_TCSR(offset) (0x00 + offset) /* SAI Transmit Control */
-+#define FSL_SAI_TCR1(offset) (0x04 + offset) /* SAI Transmit Configuration 1 */
-+#define FSL_SAI_TCR2(offset) (0x08 + offset) /* SAI Transmit Configuration 2 */
-+#define FSL_SAI_TCR3(offset) (0x0c + offset) /* SAI Transmit Configuration 3 */
-+#define FSL_SAI_TCR4(offset) (0x10 + offset) /* SAI Transmit Configuration 4 */
-+#define FSL_SAI_TCR5(offset) (0x14 + offset) /* SAI Transmit Configuration 5 */
- #define FSL_SAI_TDR0    0x20 /* SAI Transmit Data */
- #define FSL_SAI_TDR1    0x24 /* SAI Transmit Data */
- #define FSL_SAI_TFR0    0x40 /* SAI Transmit FIFO */
- #define FSL_SAI_TFR1    0x44 /* SAI Transmit FIFO */
- #define FSL_SAI_TFR	0x40 /* SAI Transmit FIFO */
- #define FSL_SAI_TMR	0x60 /* SAI Transmit Mask */
--#define FSL_SAI_RCSR	0x80 /* SAI Receive Control */
--#define FSL_SAI_RCR1	0x84 /* SAI Receive Configuration 1 */
--#define FSL_SAI_RCR2	0x88 /* SAI Receive Configuration 2 */
--#define FSL_SAI_RCR3	0x8c /* SAI Receive Configuration 3 */
--#define FSL_SAI_RCR4	0x90 /* SAI Receive Configuration 4 */
--#define FSL_SAI_RCR5	0x94 /* SAI Receive Configuration 5 */
-+#define FSL_SAI_RCSR(offset) (0x80 + offset) /* SAI Receive Control */
-+#define FSL_SAI_RCR1(offset) (0x84 + offset) /* SAI Receive Configuration 1 */
-+#define FSL_SAI_RCR2(offset) (0x88 + offset) /* SAI Receive Configuration 2 */
-+#define FSL_SAI_RCR3(offset) (0x8c + offset) /* SAI Receive Configuration 3 */
-+#define FSL_SAI_RCR4(offset) (0x90 + offset) /* SAI Receive Configuration 4 */
-+#define FSL_SAI_RCR5(offset) (0x94 + offset) /* SAI Receive Configuration 5 */
- #define FSL_SAI_RDR0    0xa0 /* SAI Receive Data */
- #define FSL_SAI_RDR1    0xa4 /* SAI Receive Data */
- #define FSL_SAI_RFR0    0xc0 /* SAI Receive FIFO */
- #define FSL_SAI_RFR1    0xc4 /* SAI Receive FIFO */
- #define FSL_SAI_RMR	0xe0 /* SAI Receive Mask */
- 
--#define FSL_SAI_xCSR(tx)	(tx ? FSL_SAI_TCSR : FSL_SAI_RCSR)
--#define FSL_SAI_xCR1(tx)	(tx ? FSL_SAI_TCR1 : FSL_SAI_RCR1)
--#define FSL_SAI_xCR2(tx)	(tx ? FSL_SAI_TCR2 : FSL_SAI_RCR2)
--#define FSL_SAI_xCR3(tx)	(tx ? FSL_SAI_TCR3 : FSL_SAI_RCR3)
--#define FSL_SAI_xCR4(tx)	(tx ? FSL_SAI_TCR4 : FSL_SAI_RCR4)
--#define FSL_SAI_xCR5(tx)	(tx ? FSL_SAI_TCR5 : FSL_SAI_RCR5)
--#define FSL_SAI_xDR(tx)		(tx ? FSL_SAI_TDR : FSL_SAI_RDR)
--#define FSL_SAI_xFR(tx)		(tx ? FSL_SAI_TFR : FSL_SAI_RFR)
-+#define FSL_SAI_xCSR(tx, off)	(tx ? FSL_SAI_TCSR(off) : FSL_SAI_RCSR(off))
-+#define FSL_SAI_xCR1(tx, off)	(tx ? FSL_SAI_TCR1(off) : FSL_SAI_RCR1(off))
-+#define FSL_SAI_xCR2(tx, off)	(tx ? FSL_SAI_TCR2(off) : FSL_SAI_RCR2(off))
-+#define FSL_SAI_xCR3(tx, off)	(tx ? FSL_SAI_TCR3(off) : FSL_SAI_RCR3(off))
-+#define FSL_SAI_xCR4(tx, off)	(tx ? FSL_SAI_TCR4(off) : FSL_SAI_RCR4(off))
-+#define FSL_SAI_xCR5(tx, off)	(tx ? FSL_SAI_TCR5(off) : FSL_SAI_RCR5(off))
- #define FSL_SAI_xMR(tx)		(tx ? FSL_SAI_TMR : FSL_SAI_RMR)
- 
- /* SAI Transmit/Receive Control Register */
-@@ -87,8 +85,7 @@
- #define FSL_SAI_CR2_DIV_MASK	0xff
- 
- /* SAI Transmit and Receive Configuration 3 Register */
--#define FSL_SAI_CR3_TRCE0	BIT(16)
--#define FSL_SAI_CR3_TRCE1	BIT(17)
-+#define FSL_SAI_CR3_TRCE_MASK	(0xff << 16)
- #define FSL_SAI_CR3_TRCE(x)	(x << 16)
- #define FSL_SAI_CR3_WDFL(x)	(x)
- #define FSL_SAI_CR3_WDFL_MASK	0x1f
-@@ -98,6 +95,7 @@
- #define FSL_SAI_CR4_FCONT	BIT(28)
- #define FSL_SAI_CR4_FCOMB_SHIFT BIT(26)
- #define FSL_SAI_CR4_FCOMB_SOFT  BIT(27)
-+#define FSL_SAI_CR4_FCOMB_MASK  (0x3 << 26)
- #define FSL_SAI_CR4_FPACK_8     (0x2 << 24)
- #define FSL_SAI_CR4_FPACK_16    (0x3 << 24)
- #define FSL_SAI_CR4_FRSZ(x)	(((x) - 1) << 16)
-@@ -147,6 +145,7 @@ struct fsl_sai_soc_data {
- 	unsigned int fifos;
- 	unsigned int dataline;
- 	unsigned int flags;
-+	unsigned char reg_offset;
- 	bool imx;
- };
- 
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0028-MLK-15927-1-ASoC-fsl_sai-Fix-noise-when-using-EDMA.patch b/target/linux/layerscape/patches-5.4/801-audio-0028-MLK-15927-1-ASoC-fsl_sai-Fix-noise-when-using-EDMA.patch
deleted file mode 100644
index 71554d295a..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0028-MLK-15927-1-ASoC-fsl_sai-Fix-noise-when-using-EDMA.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From 3b671c297cff1ba5f5c3e089ffa82523eca3c598 Mon Sep 17 00:00:00 2001
-From: Mihai Serban <mihai.serban@nxp.com>
-Date: Fri, 7 Jul 2017 15:09:51 +0300
-Subject: [PATCH] MLK-15927-1: ASoC: fsl_sai: Fix noise when using EDMA
-
-EDMA requires the period size to be multiple of maxburst. Otherwise the
-remaining bytes are not transferred and thus noise is produced.
-
-We can handle this issue by adding a constraint on
-SNDRV_PCM_HW_PARAM_PERIOD_SIZE to be multiple of tx/rx maxburst value.
-
-This is based on a similar patch we have for ESAI:
-commit bd3f3eb2a37c
-("MLK-15109-2: ASoC: fsl_esai: add constrain_period_size")
-
-Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
-Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 23 +++++++++++++++++++++++
- sound/soc/fsl/fsl_sai.h |  2 ++
- 2 files changed, 25 insertions(+)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -35,6 +35,7 @@ static struct fsl_sai_soc_data fsl_sai_v
- 	.fifos = 1,
- 	.fifo_depth = 32,
- 	.flags = 0,
-+	.constrain_period_size = false,
- };
- 
- static struct fsl_sai_soc_data fsl_sai_imx6sx = {
-@@ -44,6 +45,7 @@ static struct fsl_sai_soc_data fsl_sai_i
- 	.fifo_depth = 32,
- 	.flags = 0,
- 	.reg_offset = 0,
-+	.constrain_period_size = false,
- };
- 
- static struct fsl_sai_soc_data fsl_sai_imx6ul = {
-@@ -53,6 +55,7 @@ static struct fsl_sai_soc_data fsl_sai_i
- 	.fifo_depth = 32,
- 	.flags = 0,
- 	.reg_offset = 0,
-+	.constrain_period_size = false,
- };
- 
- static struct fsl_sai_soc_data fsl_sai_imx7ulp = {
-@@ -62,6 +65,7 @@ static struct fsl_sai_soc_data fsl_sai_i
- 	.fifo_depth = 16,
- 	.flags = SAI_FLAG_PMQOS,
- 	.reg_offset = 0,
-+	.constrain_period_size = false,
- };
- 
- static struct fsl_sai_soc_data fsl_sai_imx8mq = {
-@@ -71,6 +75,17 @@ static struct fsl_sai_soc_data fsl_sai_i
- 	.fifo_depth = 32,
- 	.flags = 0,
- 	.reg_offset = 8,
-+	.constrain_period_size = false,
-+};
-+
-+static struct fsl_sai_soc_data fsl_sai_imx8qm = {
-+	.imx = true,
-+	.dataline = 0x3,
-+	.fifos = 1,
-+	.fifo_depth = 32,
-+	.flags = 0,
-+	.reg_offset = 0,
-+	.constrain_period_size = true,
- };
- 
- static const unsigned int fsl_sai_rates[] = {
-@@ -692,6 +707,13 @@ static int fsl_sai_startup(struct snd_pc
- 			   FSL_SAI_CR3_TRCE_MASK,
- 			   FSL_SAI_CR3_TRCE(sai->dataline[tx]));
- 
-+	/* EDMA engine needs periods of size multiple of tx/rx maxburst */
-+	if (sai->soc->constrain_period_size)
-+		snd_pcm_hw_constraint_step(substream->runtime, 0,
-+					   SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
-+					   tx ? sai->dma_params_tx.maxburst :
-+					   sai->dma_params_rx.maxburst);
-+
- 	ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
- 			SNDRV_PCM_HW_PARAM_RATE, &fsl_sai_rate_constraints);
- 
-@@ -914,6 +936,7 @@ static const struct of_device_id fsl_sai
- 	{ .compatible = "fsl,imx6ul-sai", .data = &fsl_sai_imx6ul },
- 	{ .compatible = "fsl,imx7ulp-sai", .data = &fsl_sai_imx7ulp },
- 	{ .compatible = "fsl,imx8mq-sai", .data = &fsl_sai_imx8mq },
-+	{ .compatible = "fsl,imx8qm-sai", .data = &fsl_sai_imx8qm },
- 	{ /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, fsl_sai_ids);
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -147,6 +147,8 @@ struct fsl_sai_soc_data {
- 	unsigned int flags;
- 	unsigned char reg_offset;
- 	bool imx;
-+	/* True for EDMA because it needs period size multiple of maxburst */
-+	bool constrain_period_size;
- };
- 
- struct fsl_sai {
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0029-MLK-15960-1-ASoC-fsl_sai-update-fifo_depth-for-diffe.patch b/target/linux/layerscape/patches-5.4/801-audio-0029-MLK-15960-1-ASoC-fsl_sai-update-fifo_depth-for-diffe.patch
deleted file mode 100644
index d2a7955cae..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0029-MLK-15960-1-ASoC-fsl_sai-update-fifo_depth-for-diffe.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 1640daf71d5230997e9b75a550d3800bede298db Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@freescale.com>
-Date: Wed, 12 Jul 2017 18:19:25 +0800
-Subject: [PATCH] MLK-15960-1: ASoC: fsl_sai: update fifo_depth for different
- platform
-
-The fifo_depth is changed to 64 in imx8qm/imx8qxp, in imx8mq, the
-fifo_depth is 128. which is mentioned in their ADD.
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
----
- sound/soc/fsl/fsl_sai.c | 14 ++++++++------
- 1 file changed, 8 insertions(+), 6 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -72,7 +72,7 @@ static struct fsl_sai_soc_data fsl_sai_i
- 	.imx = true,
- 	.dataline = 0xff,
- 	.fifos = 8,
--	.fifo_depth = 32,
-+	.fifo_depth = 128,
- 	.flags = 0,
- 	.reg_offset = 8,
- 	.constrain_period_size = false,
-@@ -82,7 +82,7 @@ static struct fsl_sai_soc_data fsl_sai_i
- 	.imx = true,
- 	.dataline = 0x3,
- 	.fifos = 1,
--	.fifo_depth = 32,
-+	.fifo_depth = 64,
- 	.flags = 0,
- 	.reg_offset = 0,
- 	.constrain_period_size = true,
-@@ -759,10 +759,12 @@ static int fsl_sai_dai_probe(struct snd_
- 	regmap_write(sai->regmap, FSL_SAI_TCSR(offset), 0);
- 	regmap_write(sai->regmap, FSL_SAI_RCSR(offset), 0);
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_TCR1(offset), FSL_SAI_CR1_RFW_MASK,
--			   sai->soc->fifo_depth - FSL_SAI_MAXBURST_TX);
--	regmap_update_bits(sai->regmap, FSL_SAI_RCR1(offset), FSL_SAI_CR1_RFW_MASK,
--			   FSL_SAI_MAXBURST_RX - 1);
-+	regmap_update_bits(sai->regmap, FSL_SAI_TCR1(offset),
-+				sai->soc->fifo_depth - 1,
-+				sai->soc->fifo_depth - FSL_SAI_MAXBURST_TX);
-+	regmap_update_bits(sai->regmap, FSL_SAI_RCR1(offset),
-+				sai->soc->fifo_depth - 1,
-+				FSL_SAI_MAXBURST_RX - 1);
- 
- 	snd_soc_dai_init_dma_data(cpu_dai, &sai->dma_params_tx,
- 				&sai->dma_params_rx);
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0030-MLK-15960-2-ASoC-fsl_sai-refine-the-pm-runtime-funct.patch b/target/linux/layerscape/patches-5.4/801-audio-0030-MLK-15960-2-ASoC-fsl_sai-refine-the-pm-runtime-funct.patch
deleted file mode 100644
index 03201fea90..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0030-MLK-15960-2-ASoC-fsl_sai-refine-the-pm-runtime-funct.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 136762e82a9c4974c15b0525245092d11a825cee Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@freescale.com>
-Date: Wed, 12 Jul 2017 18:00:58 +0800
-Subject: [PATCH] MLK-15960-2: ASoC: fsl_sai: refine the pm runtime function
-
-In imx8qm/imx8qxp, the power domain of IP is enabled when
-pm_runtime_get_sync() is called, and disabled when pm_runtime
-_put_sync() is called. when power domain is disabled, the value
-of registers will lost, so we need to use the regcache_sync()
-to restore the registers in fsl_sai_runtime_resume.
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
----
- sound/soc/fsl/fsl_sai.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -1097,6 +1097,8 @@ static int fsl_sai_probe(struct platform
- 
- 	pm_runtime_enable(&pdev->dev);
- 
-+	regcache_cache_only(sai->regmap, true);
-+
- 	ret = devm_snd_soc_register_component(&pdev->dev, &fsl_component,
- 					      &sai->cpu_dai_drv, 1);
- 	if (ret)
-@@ -1140,6 +1142,8 @@ static int fsl_sai_runtime_suspend(struc
- {
- 	struct fsl_sai *sai = dev_get_drvdata(dev);
- 
-+	regcache_cache_only(sai->regmap, true);
-+
- 	if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE))
- 		clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[0]]);
- 
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0031-MLK-13975-ASoC-fsl_sai-Refine-master-flag-handling.patch b/target/linux/layerscape/patches-5.4/801-audio-0031-MLK-13975-ASoC-fsl_sai-Refine-master-flag-handling.patch
deleted file mode 100644
index cc60638f2b..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0031-MLK-13975-ASoC-fsl_sai-Refine-master-flag-handling.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 45ef8360c3ce459342994cdcfbf140e876b5490b Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Tue, 11 Jul 2017 08:26:44 +0300
-Subject: [PATCH] MLK-13975: ASoC: fsl_sai: Refine master flag handling
-
-The patch introduces the master flag handling
-as function of direction and the option to provide
-the flag value from DTS.
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 27 +++++++++++++++++++--------
- sound/soc/fsl/fsl_sai.h |  2 +-
- 2 files changed, 20 insertions(+), 9 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -368,9 +368,9 @@ static int fsl_sai_set_dai_fmt(struct sn
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
- 	int ret;
- 
--	if (sai->i2s_xtor)
--		fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
--		      SND_SOC_DAIFMT_CBS_CFS;
-+	if (sai->masterflag[FSL_FMT_TRANSMITTER])
-+		fmt = (fmt & (~SND_SOC_DAIFMT_MASTER_MASK)) |
-+				sai->masterflag[FSL_FMT_TRANSMITTER];
- 
- 	ret = fsl_sai_set_dai_fmt_tr(cpu_dai, fmt, FSL_FMT_TRANSMITTER);
- 	if (ret) {
-@@ -378,9 +378,9 @@ static int fsl_sai_set_dai_fmt(struct sn
- 		return ret;
- 	}
- 
--	if (sai->i2s_xtor)
--		fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
--		      SND_SOC_DAIFMT_CBM_CFM;
-+	if (sai->masterflag[FSL_FMT_RECEIVER])
-+		fmt = (fmt & (~SND_SOC_DAIFMT_MASTER_MASK)) |
-+				sai->masterflag[FSL_FMT_RECEIVER];
- 
- 	ret = fsl_sai_set_dai_fmt_tr(cpu_dai, fmt, FSL_FMT_RECEIVER);
- 	if (ret)
-@@ -1022,8 +1022,19 @@ static int fsl_sai_probe(struct platform
- 		return -EINVAL;
- 	}
- 
--	/* I2S XTOR mode */
--	sai->i2s_xtor = (of_find_property(np, "fsl,i2s-xtor", NULL) != NULL);
-+	if ((of_find_property(np, "fsl,i2s-xtor", NULL) != NULL) ||
-+	    (of_find_property(np, "fsl,txm-rxs", NULL) != NULL))
-+	{
-+		sai->masterflag[FSL_FMT_TRANSMITTER] = SND_SOC_DAIFMT_CBS_CFS;
-+		sai->masterflag[FSL_FMT_RECEIVER] = SND_SOC_DAIFMT_CBM_CFM;
-+	} else {
-+		if (!of_property_read_u32(np, "fsl,txmasterflag",
-+			&sai->masterflag[FSL_FMT_TRANSMITTER]))
-+			sai->masterflag[FSL_FMT_TRANSMITTER] <<= 12;
-+		if (!of_property_read_u32(np, "fsl,rxmasterflag",
-+			&sai->masterflag[FSL_FMT_RECEIVER]))
-+			sai->masterflag[FSL_FMT_RECEIVER] <<= 12;
-+	}
- 
- 	irq = platform_get_irq(pdev, 0);
- 	if (irq < 0) {
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -160,10 +160,10 @@ struct fsl_sai {
- 	bool slave_mode[2];
- 	bool is_lsb_first;
- 	bool is_dsp_mode;
--	bool i2s_xtor;
- 	bool synchronous[2];
- 	bool is_stream_opened[2];
- 	unsigned int dataline[2];
-+	unsigned int masterflag[2];
- 
- 	unsigned int mclk_id[2];
- 	unsigned int mclk_streams;
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0032-MLK-16130-1-ASoC-fsl_sai-enable-TCE-RCE-according-to.patch b/target/linux/layerscape/patches-5.4/801-audio-0032-MLK-16130-1-ASoC-fsl_sai-enable-TCE-RCE-according-to.patch
deleted file mode 100644
index 25275a27a2..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0032-MLK-16130-1-ASoC-fsl_sai-enable-TCE-RCE-according-to.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From 1b4638a9fa32d8a786e71a2a8813b2e1a3c15830 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@freescale.com>
-Date: Tue, 1 Aug 2017 16:10:38 +0800
-Subject: [PATCH] MLK-16130-1: ASoC: fsl_sai: enable TCE/RCE according to input
- channels
-
-If there is only two channels input and slots is 2, then enable one
-port is enough for data transfer. so enable the TCE/RCE according to
-the input channels and slots configuration.
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
----
- sound/soc/fsl/fsl_sai.c | 13 +++++++++++--
- 1 file changed, 11 insertions(+), 2 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -487,11 +487,14 @@ static int fsl_sai_hw_params(struct snd_
- 	u32 val_cr4 = 0, val_cr5 = 0;
- 	u32 slots = (channels == 1) ? 2 : channels;
- 	u32 slot_width = word_width;
-+	u32 pins;
- 	int ret;
- 
- 	if (sai->slots)
- 		slots = sai->slots;
- 
-+	pins = DIV_ROUND_UP(channels, slots);
-+
- 	if (sai->slot_width)
- 		slot_width = sai->slot_width;
- 
-@@ -558,6 +561,10 @@ static int fsl_sai_hw_params(struct snd_
- 				FSL_SAI_CR4_FCOMB_MASK, FSL_SAI_CR4_FCOMB_SOFT);
- 	}
- 
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
-+			   FSL_SAI_CR3_TRCE_MASK,
-+			   FSL_SAI_CR3_TRCE((sai->dataline[tx] & ((1 << pins) - 1))));
-+
- 	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, offset),
- 			   FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
- 			   val_cr4);
-@@ -573,8 +580,12 @@ static int fsl_sai_hw_free(struct snd_pc
- 		struct snd_soc_dai *cpu_dai)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
-+	unsigned char offset = sai->soc->reg_offset;
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
-+				   FSL_SAI_CR3_TRCE_MASK, 0);
-+
- 	if (!sai->slave_mode[tx] &&
- 			sai->mclk_streams & BIT(substream->stream)) {
- 		clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[tx]]);
-@@ -694,7 +705,6 @@ static int fsl_sai_startup(struct snd_pc
- 		struct snd_soc_dai *cpu_dai)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
--	unsigned char offset = sai->soc->reg_offset;
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 	int ret;
- 
-@@ -724,7 +734,6 @@ static void fsl_sai_shutdown(struct snd_
- 		struct snd_soc_dai *cpu_dai)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
--	unsigned char offset = sai->soc->reg_offset;
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 
- 	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, 0);
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0033-MLK-13946-3-ASoC-fsl_sai-fix-the-xMR-setting.patch b/target/linux/layerscape/patches-5.4/801-audio-0033-MLK-13946-3-ASoC-fsl_sai-fix-the-xMR-setting.patch
deleted file mode 100644
index c353ba4ae4..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0033-MLK-13946-3-ASoC-fsl_sai-fix-the-xMR-setting.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From 9d00118e0ac420d3bf6e266a0fbfd28135cbadb8 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@nxp.com>
-Date: Thu, 12 Oct 2017 14:01:19 +0800
-Subject: [PATCH] MLK-13946-3: ASoC: fsl_sai: fix the xMR setting
-
-When there is multi data line enabled, the xMR setting is
-wrong if according to the channel number. which should
-according to the slot number
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 28 ++++++++++++++++++++++++++--
- sound/soc/fsl/fsl_sai.h | 12 ++++++++++++
- 2 files changed, 38 insertions(+), 2 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -80,7 +80,7 @@ static struct fsl_sai_soc_data fsl_sai_i
- 
- static struct fsl_sai_soc_data fsl_sai_imx8qm = {
- 	.imx = true,
--	.dataline = 0x3,
-+	.dataline = 0xf,
- 	.fifos = 1,
- 	.fifo_depth = 64,
- 	.flags = 0,
-@@ -571,7 +571,7 @@ static int fsl_sai_hw_params(struct snd_
- 	regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx, offset),
- 			   FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
- 			   FSL_SAI_CR5_FBT_MASK, val_cr5);
--	regmap_write(sai->regmap, FSL_SAI_xMR(tx), ~0UL - ((1 << channels) - 1));
-+	regmap_write(sai->regmap, FSL_SAI_xMR(tx), ~0UL - ((1 << slots) - 1));
- 
- 	return 0;
- }
-@@ -858,11 +858,23 @@ static bool fsl_sai_readable_reg(struct
- 	switch (reg) {
- 	case FSL_SAI_TFR0:
- 	case FSL_SAI_TFR1:
-+	case FSL_SAI_TFR2:
-+	case FSL_SAI_TFR3:
-+	case FSL_SAI_TFR4:
-+	case FSL_SAI_TFR5:
-+	case FSL_SAI_TFR6:
-+	case FSL_SAI_TFR7:
- 	case FSL_SAI_TMR:
- 	case FSL_SAI_RDR0:
- 	case FSL_SAI_RDR1:
- 	case FSL_SAI_RFR0:
- 	case FSL_SAI_RFR1:
-+	case FSL_SAI_RFR2:
-+	case FSL_SAI_RFR3:
-+	case FSL_SAI_RFR4:
-+	case FSL_SAI_RFR5:
-+	case FSL_SAI_RFR6:
-+	case FSL_SAI_RFR7:
- 	case FSL_SAI_RMR:
- 		return true;
- 	default:
-@@ -881,8 +893,20 @@ static bool fsl_sai_volatile_reg(struct
- 	switch (reg) {
- 	case FSL_SAI_TFR0:
- 	case FSL_SAI_TFR1:
-+	case FSL_SAI_TFR2:
-+	case FSL_SAI_TFR3:
-+	case FSL_SAI_TFR4:
-+	case FSL_SAI_TFR5:
-+	case FSL_SAI_TFR6:
-+	case FSL_SAI_TFR7:
- 	case FSL_SAI_RFR0:
- 	case FSL_SAI_RFR1:
-+	case FSL_SAI_RFR2:
-+	case FSL_SAI_RFR3:
-+	case FSL_SAI_RFR4:
-+	case FSL_SAI_RFR5:
-+	case FSL_SAI_RFR6:
-+	case FSL_SAI_RFR7:
- 	case FSL_SAI_RDR0:
- 	case FSL_SAI_RDR1:
- 		return true;
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -24,6 +24,12 @@
- #define FSL_SAI_TDR1    0x24 /* SAI Transmit Data */
- #define FSL_SAI_TFR0    0x40 /* SAI Transmit FIFO */
- #define FSL_SAI_TFR1    0x44 /* SAI Transmit FIFO */
-+#define FSL_SAI_TFR2    0x48 /* SAI Transmit FIFO */
-+#define FSL_SAI_TFR3    0x4C /* SAI Transmit FIFO */
-+#define FSL_SAI_TFR4    0x50 /* SAI Transmit FIFO */
-+#define FSL_SAI_TFR5    0x54 /* SAI Transmit FIFO */
-+#define FSL_SAI_TFR6    0x58 /* SAI Transmit FIFO */
-+#define FSL_SAI_TFR7    0x5C /* SAI Transmit FIFO */
- #define FSL_SAI_TFR	0x40 /* SAI Transmit FIFO */
- #define FSL_SAI_TMR	0x60 /* SAI Transmit Mask */
- #define FSL_SAI_RCSR(offset) (0x80 + offset) /* SAI Receive Control */
-@@ -36,6 +42,12 @@
- #define FSL_SAI_RDR1    0xa4 /* SAI Receive Data */
- #define FSL_SAI_RFR0    0xc0 /* SAI Receive FIFO */
- #define FSL_SAI_RFR1    0xc4 /* SAI Receive FIFO */
-+#define FSL_SAI_RFR2    0xc8 /* SAI Receive FIFO */
-+#define FSL_SAI_RFR3    0xcc /* SAI Receive FIFO */
-+#define FSL_SAI_RFR4    0xd0 /* SAI Receive FIFO */
-+#define FSL_SAI_RFR5    0xd4 /* SAI Receive FIFO */
-+#define FSL_SAI_RFR6    0xd8 /* SAI Receive FIFO */
-+#define FSL_SAI_RFR7    0xdc /* SAI Receive FIFO */
- #define FSL_SAI_RMR	0xe0 /* SAI Receive Mask */
- 
- #define FSL_SAI_xCSR(tx, off)	(tx ? FSL_SAI_TCSR(off) : FSL_SAI_RCSR(off))
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0034-MLK-13946-8-ASoC-fsl_sai-use-min-channels-slots-for-.patch b/target/linux/layerscape/patches-5.4/801-audio-0034-MLK-13946-8-ASoC-fsl_sai-use-min-channels-slots-for-.patch
deleted file mode 100644
index ab89291189..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0034-MLK-13946-8-ASoC-fsl_sai-use-min-channels-slots-for-.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 283d3a9e253d2cefd915ee7f891c24edc3e6d6d0 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Tue, 24 Oct 2017 13:09:27 +0300
-Subject: [PATCH] MLK-13946-8: ASoC: fsl_sai: use min(channels,slots) for xMR
- setting
-
-xMR setting must be set as min(channels,slots) since
-both "channels < slots" and "channels > slots" scenarios
-are possible.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -571,8 +571,8 @@ static int fsl_sai_hw_params(struct snd_
- 	regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx, offset),
- 			   FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
- 			   FSL_SAI_CR5_FBT_MASK, val_cr5);
--	regmap_write(sai->regmap, FSL_SAI_xMR(tx), ~0UL - ((1 << slots) - 1));
--
-+	regmap_write(sai->regmap, FSL_SAI_xMR(tx),
-+			~0UL - ((1 << min(channels, slots)) - 1));
- 	return 0;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0035-MLK-16929-1-ASoC-fsl_sai-add-bitclk_freq.patch b/target/linux/layerscape/patches-5.4/801-audio-0035-MLK-16929-1-ASoC-fsl_sai-add-bitclk_freq.patch
deleted file mode 100644
index c095f5ff35..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0035-MLK-16929-1-ASoC-fsl_sai-add-bitclk_freq.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From d40566a2e9aa3c40be313b1fba9d5435c58ffd79 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@nxp.com>
-Date: Thu, 23 Nov 2017 13:32:13 +0800
-Subject: [PATCH] MLK-16929-1: ASoC: fsl_sai: add bitclk_freq
-
-Allow set SAI bit clock frequency trough snd_soc_dai_set_sysclk
-function call on machine sound drivers.
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
-Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 9 ++++++++-
- sound/soc/fsl/fsl_sai.h | 1 +
- 2 files changed, 9 insertions(+), 1 deletion(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -233,11 +233,14 @@ static int fsl_sai_set_dai_sysclk_tr(str
- static int fsl_sai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
- 		int clk_id, unsigned int freq, int dir)
- {
-+	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
- 	int ret;
- 
- 	if (dir == SND_SOC_CLOCK_IN)
- 		return 0;
- 
-+	sai->bitclk_freq = freq;
-+
- 	ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq,
- 					FSL_FMT_TRANSMITTER);
- 	if (ret) {
-@@ -499,7 +502,11 @@ static int fsl_sai_hw_params(struct snd_
- 		slot_width = sai->slot_width;
- 
- 	if (!sai->slave_mode[tx]) {
--		ret = fsl_sai_set_bclk(cpu_dai, tx,
-+		if (sai->bitclk_freq)
-+			ret = fsl_sai_set_bclk(cpu_dai, tx,
-+					sai->bitclk_freq);
-+		else
-+			ret = fsl_sai_set_bclk(cpu_dai, tx,
- 				slots * slot_width * params_rate(params));
- 		if (ret)
- 			return ret;
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -181,6 +181,7 @@ struct fsl_sai {
- 	unsigned int mclk_streams;
- 	unsigned int slots;
- 	unsigned int slot_width;
-+	unsigned int bitclk_freq;
- 
- 	struct snd_soc_dai_driver cpu_dai_drv;
- 	struct snd_dmaengine_dai_dma_data dma_params_rx;
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0037-MLK-16224-4-ASoC-fsl_sai-support-multi-fifo-and-DSD.patch b/target/linux/layerscape/patches-5.4/801-audio-0037-MLK-16224-4-ASoC-fsl_sai-support-multi-fifo-and-DSD.patch
deleted file mode 100644
index c2952deaab..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0037-MLK-16224-4-ASoC-fsl_sai-support-multi-fifo-and-DSD.patch
+++ /dev/null
@@ -1,326 +0,0 @@
-From 87f734fa8214b4ddbfdac9b7ac5dc75a3d86badb Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@nxp.com>
-Date: Tue, 23 Jan 2018 13:26:37 +0800
-Subject: [PATCH] MLK-16224-4: ASoC: fsl_sai: support multi fifo and DSD
-
-The codec always mux the LRCLK pin to DSD data line, so when
-we want to support DSD, the pinmux is different. For two channel
-DSD, the DSDL is mapped to TX0, but the DSDR is mapped to TX4,
-there is address offset for the fifo address of TX0 and TX4, TX4's
-fifo is not adjacent to TX0's.
-
-Usually, if mapping is TX0 and TX1, that will be easy for SAI
-and SDMA to handle, that SAI can use the FIFO combine mode, SDMA
-can use the normal script.
-
-so for DSD:
-1. The SDMA should use the multi-fifo script, and SAI can't
-use the FIFO combine mode.
-2. driver should to check the dts configuration(fsl,dataline) for
-which dataline is used corrently
-3. maxburst is the multiply of datalines
-4. each channel of DSD occupy one data lane
-5. according to data lane, set TRCE bits
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
-Reviewed-by: Viorel Suman <viorel.suman@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 162 +++++++++++++++++++++++++++++++++++++++++++++---
- sound/soc/fsl/fsl_sai.h |  12 +++-
- 2 files changed, 164 insertions(+), 10 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -267,6 +267,7 @@ static int fsl_sai_set_dai_fmt_tr(struct
- 	if (!sai->is_lsb_first)
- 		val_cr4 |= FSL_SAI_CR4_MF;
- 
-+	sai->is_dsp_mode = false;
- 	/* DAI mode */
- 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
- 	case SND_SOC_DAIFMT_I2S:
-@@ -305,6 +306,11 @@ static int fsl_sai_set_dai_fmt_tr(struct
- 		val_cr2 |= FSL_SAI_CR2_BCP;
- 		sai->is_dsp_mode = true;
- 		break;
-+	case SND_SOC_DAIFMT_PDM:
-+		val_cr2 |= FSL_SAI_CR2_BCP;
-+		val_cr4 &= ~FSL_SAI_CR4_MF;
-+		sai->is_dsp_mode = true;
-+		break;
- 	case SND_SOC_DAIFMT_RIGHT_J:
- 		/* To be done */
- 	default:
-@@ -492,12 +498,38 @@ static int fsl_sai_hw_params(struct snd_
- 	u32 slot_width = word_width;
- 	u32 pins;
- 	int ret;
-+	int i;
-+	int trce_mask = 0;
-+	snd_pcm_format_t format = params_format(params);
- 
- 	if (sai->slots)
- 		slots = sai->slots;
- 
- 	pins = DIV_ROUND_UP(channels, slots);
- 
-+	if (format == SNDRV_PCM_FORMAT_DSD_U8 ||
-+		format == SNDRV_PCM_FORMAT_DSD_U16_LE ||
-+		format == SNDRV_PCM_FORMAT_DSD_U16_BE ||
-+		format == SNDRV_PCM_FORMAT_DSD_U32_LE ||
-+		format == SNDRV_PCM_FORMAT_DSD_U32_BE) {
-+		sai->is_dsd = true;
-+
-+		if (!IS_ERR_OR_NULL(sai->pins_dsd)) {
-+			ret = pinctrl_select_state(sai->pinctrl, sai->pins_dsd);
-+			if (ret) {
-+				dev_err(cpu_dai->dev,
-+					"failed to set proper pins state: %d\n", ret);
-+				return ret;
-+			}
-+		}
-+	} else {
-+		pinctrl_pm_select_default_state(cpu_dai->dev);
-+		sai->is_dsd = false;
-+	}
-+
-+	if (sai->is_dsd)
-+		pins = channels;
-+
- 	if (sai->slot_width)
- 		slot_width = sai->slot_width;
- 
-@@ -527,7 +559,7 @@ static int fsl_sai_hw_params(struct snd_
- 	val_cr5 |= FSL_SAI_CR5_WNW(slot_width);
- 	val_cr5 |= FSL_SAI_CR5_W0W(slot_width);
- 
--	if (sai->is_lsb_first)
-+	if (sai->is_lsb_first || sai->is_dsd)
- 		val_cr5 |= FSL_SAI_CR5_FBT(0);
- 	else
- 		val_cr5 |= FSL_SAI_CR5_FBT(word_width - 1);
-@@ -560,17 +592,71 @@ static int fsl_sai_hw_params(struct snd_
- 	}
- 
- 	if (sai->soc->dataline != 0x1) {
--		if (sai->dataline[tx] <= 1)
-+
-+		if (sai->dataline[tx] <= 1 || sai->is_multi_lane)
- 			regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, offset),
- 				FSL_SAI_CR4_FCOMB_MASK, 0);
- 		else
- 			regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, offset),
- 				FSL_SAI_CR4_FCOMB_MASK, FSL_SAI_CR4_FCOMB_SOFT);
-+
-+		if (sai->is_multi_lane) {
-+			if (tx) {
-+				sai->dma_params_tx.maxburst =
-+						FSL_SAI_MAXBURST_TX * pins;
-+				if (sai->is_dsd)
-+					sai->dma_params_tx.fifo_num = pins +
-+					   (sai->dataline_off_dsd[tx] << 8);
-+				else
-+					sai->dma_params_tx.fifo_num = pins +
-+						(sai->dataline_off[tx] << 8);
-+			} else {
-+				sai->dma_params_rx.maxburst =
-+					FSL_SAI_MAXBURST_RX * pins;
-+				if (sai->is_dsd)
-+					sai->dma_params_rx.fifo_num = pins +
-+					  (sai->dataline_off_dsd[tx] << 8);
-+				else
-+					sai->dma_params_rx.fifo_num = pins +
-+						(sai->dataline_off[tx] << 8);
-+			}
-+		}
-+
-+		snd_soc_dai_init_dma_data(cpu_dai, &sai->dma_params_tx,
-+				&sai->dma_params_rx);
- 	}
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
-+	if (sai->is_dsd) {
-+		if (__sw_hweight8(sai->dataline_dsd[tx] & 0xFF) < pins) {
-+			dev_err(cpu_dai->dev, "channel not supported\n");
-+			return -EINVAL;
-+		}
-+		/*find a proper tcre setting*/
-+		for (i = 0; i < 8; i++) {
-+			trce_mask = (1 << (i + 1)) - 1;
-+			if (__sw_hweight8(sai->dataline_dsd[tx] & trce_mask) == pins)
-+				break;
-+		}
-+
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
- 			   FSL_SAI_CR3_TRCE_MASK,
--			   FSL_SAI_CR3_TRCE((sai->dataline[tx] & ((1 << pins) - 1))));
-+			   FSL_SAI_CR3_TRCE((sai->dataline_dsd[tx] & trce_mask)));
-+	} else {
-+		if (__sw_hweight8(sai->dataline[tx] & 0xFF) < pins) {
-+			dev_err(cpu_dai->dev, "channel not supported\n");
-+			return -EINVAL;
-+		}
-+		/*find a proper tcre setting*/
-+		for (i = 0; i < 8; i++) {
-+			trce_mask = (1 << (i + 1)) - 1;
-+			if (__sw_hweight8(sai->dataline[tx] & trce_mask) == pins)
-+				break;
-+		}
-+
-+		regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
-+			   FSL_SAI_CR3_TRCE_MASK,
-+			   FSL_SAI_CR3_TRCE((sai->dataline[tx] & trce_mask)));
-+	}
- 
- 	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, offset),
- 			   FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
-@@ -610,9 +696,18 @@ static int fsl_sai_trigger(struct snd_pc
- 	unsigned char offset = sai->soc->reg_offset;
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 	u8 channels = substream->runtime->channels;
-+	u32 slots = (channels == 1) ? 2 : channels;
- 	u32 xcsr, count = 100;
--	int i;
-+	u32 pins;
-+	int i = 0, j = 0, k = 0;
-+
-+	if (sai->slots)
-+		slots = sai->slots;
-+
-+	pins = DIV_ROUND_UP(channels, slots);
- 
-+	if (sai->is_dsd)
-+		pins = channels;
- 	/*
- 	 * Asynchronous mode: Clear SYNC for both Tx and Rx.
- 	 * Rx sync with Tx clocks: Clear SYNC for Tx, set it for Rx.
-@@ -631,10 +726,19 @@ static int fsl_sai_trigger(struct snd_pc
- 	case SNDRV_PCM_TRIGGER_START:
- 	case SNDRV_PCM_TRIGGER_RESUME:
- 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
--		for (i = 0; tx && i < channels; i++)
--			regmap_write(sai->regmap, FSL_SAI_TDR0, 0x0);
--		if (tx)
--			udelay(10);
-+
-+		for (i = 0; tx && i < channels; i++) {
-+		while (tx && i < channels)
-+			if (sai->dataline[tx] & (1 << j)) {
-+				regmap_write(sai->regmap, FSL_SAI_TDR0 + j * 0x4, 0x0);
-+				i++;
-+				k++;
-+			}
-+			j++;
-+
-+			if (k%pins == 0)
-+				j = 0;
-+		}
- 
- 		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, offset),
- 				   FSL_SAI_CSR_FRDE, FSL_SAI_CSR_FRDE);
-@@ -994,6 +1098,7 @@ static int fsl_sai_probe(struct platform
- 	char tmp[8];
- 	int irq, ret, i;
- 	int index;
-+	int firstbitidx, nextbitidx;
- 	struct regmap_config fsl_sai_regmap_config = fsl_sai_v2_regmap_config;
- 	unsigned long irqflags = 0;
- 
-@@ -1048,6 +1153,9 @@ static int fsl_sai_probe(struct platform
- 		}
- 	}
- 
-+	if (of_find_property(np, "fsl,sai-multi-lane", NULL))
-+		sai->is_multi_lane = true;
-+
- 	/*dataline mask for rx and tx*/
- 	ret = of_property_read_u32_index(np, "fsl,dataline", 0, &sai->dataline[0]);
- 	if (ret)
-@@ -1062,6 +1170,37 @@ static int fsl_sai_probe(struct platform
- 		return -EINVAL;
- 	}
- 
-+	for (i = 0; i < 2; i++) {
-+		firstbitidx = find_first_bit((const unsigned long *)&sai->dataline[i], 8);
-+		nextbitidx = find_next_bit((const unsigned long *)&sai->dataline[i], 8, firstbitidx+1);
-+		sai->dataline_off[i] = nextbitidx - firstbitidx - 1;
-+
-+		if (sai->dataline_off[i] < 0 || sai->dataline_off[i] >= 7)
-+			sai->dataline_off[i] = 0;
-+	}
-+
-+	ret = of_property_read_u32_index(np, "fsl,dataline,dsd", 0, &sai->dataline_dsd[0]);
-+	if (ret)
-+		sai->dataline_dsd[0] = 1;
-+
-+	ret = of_property_read_u32_index(np, "fsl,dataline,dsd", 1, &sai->dataline_dsd[1]);
-+	if (ret)
-+		sai->dataline_dsd[1] = 1;
-+
-+	if ((sai->dataline_dsd[0] & (~sai->soc->dataline)) || sai->dataline_dsd[1] & (~sai->soc->dataline)) {
-+		dev_err(&pdev->dev, "dataline setting error, Mask is 0x%x\n", sai->soc->dataline);
-+		return -EINVAL;
-+	}
-+
-+	for (i = 0; i < 2; i++) {
-+		firstbitidx = find_first_bit((const unsigned long *)&sai->dataline_dsd[i], 8);
-+		nextbitidx = find_next_bit((const unsigned long *)&sai->dataline_dsd[i], 8, firstbitidx+1);
-+		sai->dataline_off_dsd[i] = nextbitidx - firstbitidx - 1;
-+
-+		if (sai->dataline_off_dsd[i] < 0 || sai->dataline_off_dsd[i] >= 7)
-+			sai->dataline_off_dsd[i] = 0;
-+	}
-+
- 	if ((of_find_property(np, "fsl,i2s-xtor", NULL) != NULL) ||
- 	    (of_find_property(np, "fsl,txm-rxs", NULL) != NULL))
- 	{
-@@ -1144,6 +1283,11 @@ static int fsl_sai_probe(struct platform
- 	sai->dma_params_rx.maxburst = FSL_SAI_MAXBURST_RX;
- 	sai->dma_params_tx.maxburst = FSL_SAI_MAXBURST_TX;
- 
-+	sai->pinctrl  = devm_pinctrl_get(&pdev->dev);
-+
-+	if (!IS_ERR_OR_NULL(sai->pinctrl))
-+		sai->pins_dsd = pinctrl_lookup_state(sai->pinctrl, "dsd");
-+
- 	platform_set_drvdata(pdev, sai);
- 
- 	pm_runtime_enable(&pdev->dev);
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -11,7 +11,10 @@
- 
- #define FSL_SAI_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
- 			 SNDRV_PCM_FMTBIT_S24_LE |\
--			 SNDRV_PCM_FMTBIT_S32_LE)
-+			 SNDRV_PCM_FMTBIT_S32_LE |\
-+			 SNDRV_PCM_FMTBIT_DSD_U8 |\
-+			 SNDRV_PCM_FMTBIT_DSD_U16_LE |\
-+			 SNDRV_PCM_FMTBIT_DSD_U32_LE)
- 
- /* SAI Register Map Register */
- #define FSL_SAI_TCSR(offset) (0x00 + offset) /* SAI Transmit Control */
-@@ -172,9 +175,14 @@ struct fsl_sai {
- 	bool slave_mode[2];
- 	bool is_lsb_first;
- 	bool is_dsp_mode;
-+	bool is_multi_lane;
- 	bool synchronous[2];
- 	bool is_stream_opened[2];
-+	bool is_dsd;
- 	unsigned int dataline[2];
-+	unsigned int dataline_dsd[2];
-+	unsigned int dataline_off[2];
-+	unsigned int dataline_off_dsd[2];
- 	unsigned int masterflag[2];
- 
- 	unsigned int mclk_id[2];
-@@ -188,6 +196,8 @@ struct fsl_sai {
- 	struct snd_dmaengine_dai_dma_data dma_params_tx;
- 	const struct fsl_sai_soc_data *soc;
- 	struct pm_qos_request pm_qos_req;
-+	struct pinctrl *pinctrl;
-+	struct pinctrl_state *pins_dsd;
- };
- 
- #define TX 1
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0038-MLK-17467-ASoC-fsl_sai-fix-typo-for-fsl_sai.patch b/target/linux/layerscape/patches-5.4/801-audio-0038-MLK-17467-ASoC-fsl_sai-fix-typo-for-fsl_sai.patch
deleted file mode 100644
index 9499b54747..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0038-MLK-17467-ASoC-fsl_sai-fix-typo-for-fsl_sai.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From b22f55e1f41ebe218604f12c127d299a2c302393 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@nxp.com>
-Date: Fri, 26 Jan 2018 16:44:19 +0800
-Subject: [PATCH] MLK-17467: ASoC: fsl_sai: fix typo for fsl_sai
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Fix build warning
-
-sound/soc/fsl/fsl_sai.c: In function ‘fsl_sai_trigger’:
-sound/soc/fsl/fsl_sai.c:736:3: warning: this ‘while’ clause does not guard... [-Wmisleading-indentation]
-   while (tx && i < channels)
-   ^~~~~
-sound/soc/fsl/fsl_sai.c:742:4: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘while’
-    j++;
-    ^
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -727,9 +727,8 @@ static int fsl_sai_trigger(struct snd_pc
- 	case SNDRV_PCM_TRIGGER_RESUME:
- 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- 
--		for (i = 0; tx && i < channels; i++) {
--		while (tx && i < channels)
--			if (sai->dataline[tx] & (1 << j)) {
-+		while (tx && i < channels) {
-+			if ((sai->is_dsd ? sai->dataline_dsd[tx] : sai->dataline[tx]) & (1 << j)) {
- 				regmap_write(sai->regmap, FSL_SAI_TDR0 + j * 0x4, 0x0);
- 				i++;
- 				k++;
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0039-MLK-16224-6-ASoC-fsl_sai-fix-DSD-suspend-resume.patch b/target/linux/layerscape/patches-5.4/801-audio-0039-MLK-16224-6-ASoC-fsl_sai-fix-DSD-suspend-resume.patch
deleted file mode 100644
index a01ac65180..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0039-MLK-16224-6-ASoC-fsl_sai-fix-DSD-suspend-resume.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From a115bf34468398647e7a8f380058bd597e44e1b3 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Mon, 29 Jan 2018 16:04:44 +0200
-Subject: [PATCH] MLK-16224-6: ASoC: fsl_sai: fix DSD suspend/resume
-
-With the existing implementation the SAI pinctrl state is restored to
-default after resume - this breaks DSD playback after resume.
-Restore DSD pinctrl state in snd_soc_dai_driver resume callback.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
-Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -893,6 +893,23 @@ static int fsl_sai_dai_probe(struct snd_
- 	return 0;
- }
- 
-+static int fsl_sai_dai_resume(struct snd_soc_dai *cpu_dai)
-+{
-+	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
-+	int ret;
-+
-+	if (sai->is_dsd && !IS_ERR_OR_NULL(sai->pins_dsd)) {
-+		ret = pinctrl_select_state(sai->pinctrl, sai->pins_dsd);
-+		if (ret) {
-+			dev_err(cpu_dai->dev,
-+				"failed to set proper pins state: %d\n", ret);
-+			return ret;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
- static struct snd_soc_dai_driver fsl_sai_dai_template = {
- 	.probe = fsl_sai_dai_probe,
- 	.playback = {
-@@ -913,6 +930,7 @@ static struct snd_soc_dai_driver fsl_sai
- 		.rates = SNDRV_PCM_RATE_KNOT,
- 		.formats = FSL_SAI_FORMATS,
- 	},
-+	.resume  = fsl_sai_dai_resume,
- 	.ops = &fsl_sai_pcm_dai_ops,
- };
- 
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0040-MLK-17428-8-ASoC-fsl_sai-support-768KHz-sample-rate.patch b/target/linux/layerscape/patches-5.4/801-audio-0040-MLK-17428-8-ASoC-fsl_sai-support-768KHz-sample-rate.patch
deleted file mode 100644
index 63b38b65eb..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0040-MLK-17428-8-ASoC-fsl_sai-support-768KHz-sample-rate.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 2bc81e99f261aa6eafa900453b477dd46d568d73 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@nxp.com>
-Date: Fri, 19 Jan 2018 15:45:21 +0800
-Subject: [PATCH] MLK-17428-8: ASoC: fsl_sai: support 768KHz sample rate
-
-support 768Hz sample rate and 2.8MHz for DSD
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -91,7 +91,8 @@ static struct fsl_sai_soc_data fsl_sai_i
- static const unsigned int fsl_sai_rates[] = {
- 	8000, 11025, 12000, 16000, 22050,
- 	24000, 32000, 44100, 48000, 64000,
--	88200, 96000, 176400, 192000
-+	88200, 96000, 176400, 192000, 352800,
-+	384000, 705600, 768000, 1411200, 2822400,
- };
- 
- static const struct snd_pcm_hw_constraint_list fsl_sai_rate_constraints = {
-@@ -916,8 +917,6 @@ static struct snd_soc_dai_driver fsl_sai
- 		.stream_name = "CPU-Playback",
- 		.channels_min = 1,
- 		.channels_max = 32,
--		.rate_min = 8000,
--		.rate_max = 192000,
- 		.rates = SNDRV_PCM_RATE_KNOT,
- 		.formats = FSL_SAI_FORMATS,
- 	},
-@@ -925,8 +924,6 @@ static struct snd_soc_dai_driver fsl_sai
- 		.stream_name = "CPU-Capture",
- 		.channels_min = 1,
- 		.channels_max = 32,
--		.rate_min = 8000,
--		.rate_max = 192000,
- 		.rates = SNDRV_PCM_RATE_KNOT,
- 		.formats = FSL_SAI_FORMATS,
- 	},
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0041-MLK-17485-ASoC-fsl_sai-Specify-supported-rate_min-an.patch b/target/linux/layerscape/patches-5.4/801-audio-0041-MLK-17485-ASoC-fsl_sai-Specify-supported-rate_min-an.patch
deleted file mode 100644
index 93588333ae..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0041-MLK-17485-ASoC-fsl_sai-Specify-supported-rate_min-an.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 4859edfca7fb2408b8b9f90bf03c62e484dadc79 Mon Sep 17 00:00:00 2001
-From: Daniel Baluta <daniel.baluta@nxp.com>
-Date: Fri, 2 Feb 2018 11:02:27 +0200
-Subject: [PATCH] MLK-17485: ASoC: fsl_sai: Specify supported rate_min and
- rate_max
-
-Because fsl_sai_dai rates doesn't have a specific set of
-rate values (.rates = SNDRV_PCM_RATE_KNOT) we need to provide
-rate_min and rate_max otherwise functions trying to get
-supported parameters will get confused and return an error.
-
-Fixes:  1b6f0496e013 ("MLK-17428-8: ASoC: fsl_sai: support 768KHz sample rate")
-Reviewed-by: Viorel Suman <viorel.suman@nxp.com>
-Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -917,6 +917,8 @@ static struct snd_soc_dai_driver fsl_sai
- 		.stream_name = "CPU-Playback",
- 		.channels_min = 1,
- 		.channels_max = 32,
-+		.rate_min = 8000,
-+		.rate_max = 2822400,
- 		.rates = SNDRV_PCM_RATE_KNOT,
- 		.formats = FSL_SAI_FORMATS,
- 	},
-@@ -924,6 +926,8 @@ static struct snd_soc_dai_driver fsl_sai
- 		.stream_name = "CPU-Capture",
- 		.channels_min = 1,
- 		.channels_max = 32,
-+		.rate_min = 8000,
-+		.rate_max = 2822400,
- 		.rates = SNDRV_PCM_RATE_KNOT,
- 		.formats = FSL_SAI_FORMATS,
- 	},
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0042-MLK-17566-ASoC-fsl_sai-fix-register-definition.patch b/target/linux/layerscape/patches-5.4/801-audio-0042-MLK-17566-ASoC-fsl_sai-fix-register-definition.patch
deleted file mode 100644
index bd6488a782..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0042-MLK-17566-ASoC-fsl_sai-fix-register-definition.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 8e28947dacb52352807fed71d70355a18bf416c5 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@nxp.com>
-Date: Thu, 8 Feb 2018 14:38:35 +0800
-Subject: [PATCH] MLK-17566: ASoC: fsl_sai: fix register definition
-
-The register definition is not completed for SAI support
-8 transmit data register and 8 receive data register.
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
-Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 24 ++++++++++++++++++++++++
- sound/soc/fsl/fsl_sai.h | 12 ++++++++++++
- 2 files changed, 36 insertions(+)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -964,6 +964,12 @@ static struct reg_default fsl_sai_v3_reg
- 	{FSL_SAI_TCR5(8), 0},
- 	{FSL_SAI_TDR0, 0},
- 	{FSL_SAI_TDR1, 0},
-+	{FSL_SAI_TDR2, 0},
-+	{FSL_SAI_TDR3, 0},
-+	{FSL_SAI_TDR4, 0},
-+	{FSL_SAI_TDR5, 0},
-+	{FSL_SAI_TDR6, 0},
-+	{FSL_SAI_TDR7, 0},
- 	{FSL_SAI_TMR,  0},
- 	{FSL_SAI_RCR1(8), 0},
- 	{FSL_SAI_RCR2(8), 0},
-@@ -996,6 +1002,12 @@ static bool fsl_sai_readable_reg(struct
- 	case FSL_SAI_TMR:
- 	case FSL_SAI_RDR0:
- 	case FSL_SAI_RDR1:
-+	case FSL_SAI_RDR2:
-+	case FSL_SAI_RDR3:
-+	case FSL_SAI_RDR4:
-+	case FSL_SAI_RDR5:
-+	case FSL_SAI_RDR6:
-+	case FSL_SAI_RDR7:
- 	case FSL_SAI_RFR0:
- 	case FSL_SAI_RFR1:
- 	case FSL_SAI_RFR2:
-@@ -1038,6 +1050,12 @@ static bool fsl_sai_volatile_reg(struct
- 	case FSL_SAI_RFR7:
- 	case FSL_SAI_RDR0:
- 	case FSL_SAI_RDR1:
-+	case FSL_SAI_RDR2:
-+	case FSL_SAI_RDR3:
-+	case FSL_SAI_RDR4:
-+	case FSL_SAI_RDR5:
-+	case FSL_SAI_RDR6:
-+	case FSL_SAI_RDR7:
- 		return true;
- 	default:
- 		return false;
-@@ -1058,6 +1076,12 @@ static bool fsl_sai_writeable_reg(struct
- 	switch (reg) {
- 	case FSL_SAI_TDR0:
- 	case FSL_SAI_TDR1:
-+	case FSL_SAI_TDR2:
-+	case FSL_SAI_TDR3:
-+	case FSL_SAI_TDR4:
-+	case FSL_SAI_TDR5:
-+	case FSL_SAI_TDR6:
-+	case FSL_SAI_TDR7:
- 	case FSL_SAI_TMR:
- 	case FSL_SAI_RMR:
- 		return true;
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -25,6 +25,12 @@
- #define FSL_SAI_TCR5(offset) (0x14 + offset) /* SAI Transmit Configuration 5 */
- #define FSL_SAI_TDR0    0x20 /* SAI Transmit Data */
- #define FSL_SAI_TDR1    0x24 /* SAI Transmit Data */
-+#define FSL_SAI_TDR2    0x28 /* SAI Transmit Data */
-+#define FSL_SAI_TDR3    0x2C /* SAI Transmit Data */
-+#define FSL_SAI_TDR4    0x30 /* SAI Transmit Data */
-+#define FSL_SAI_TDR5    0x34 /* SAI Transmit Data */
-+#define FSL_SAI_TDR6    0x38 /* SAI Transmit Data */
-+#define FSL_SAI_TDR7    0x3C /* SAI Transmit Data */
- #define FSL_SAI_TFR0    0x40 /* SAI Transmit FIFO */
- #define FSL_SAI_TFR1    0x44 /* SAI Transmit FIFO */
- #define FSL_SAI_TFR2    0x48 /* SAI Transmit FIFO */
-@@ -43,6 +49,12 @@
- #define FSL_SAI_RCR5(offset) (0x94 + offset) /* SAI Receive Configuration 5 */
- #define FSL_SAI_RDR0    0xa0 /* SAI Receive Data */
- #define FSL_SAI_RDR1    0xa4 /* SAI Receive Data */
-+#define FSL_SAI_RDR2    0xa8 /* SAI Receive Data */
-+#define FSL_SAI_RDR3    0xac /* SAI Receive Data */
-+#define FSL_SAI_RDR4    0xb0 /* SAI Receive Data */
-+#define FSL_SAI_RDR5    0xb4 /* SAI Receive Data */
-+#define FSL_SAI_RDR6    0xb8 /* SAI Receive Data */
-+#define FSL_SAI_RDR7    0xbc /* SAI Receive Data */
- #define FSL_SAI_RFR0    0xc0 /* SAI Receive FIFO */
- #define FSL_SAI_RFR1    0xc4 /* SAI Receive FIFO */
- #define FSL_SAI_RFR2    0xc8 /* SAI Receive FIFO */
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0043-MLK-17528-1-ASoC-fsl_sai-Introduce-FSL_SAI_CLK_BIT-c.patch b/target/linux/layerscape/patches-5.4/801-audio-0043-MLK-17528-1-ASoC-fsl_sai-Introduce-FSL_SAI_CLK_BIT-c.patch
deleted file mode 100644
index a6ff55b3fb..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0043-MLK-17528-1-ASoC-fsl_sai-Introduce-FSL_SAI_CLK_BIT-c.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 8eb2c08d504ac0697285b08084487fd3869ea7b6 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Thu, 8 Feb 2018 12:47:24 +0200
-Subject: [PATCH] MLK-17528-1: ASoC: fsl_sai: Introduce FSL_SAI_CLK_BIT clock
- id
-
-Introduce FSL_SAI_CLK_BIT clock id in order to distinguish
-the bit clock and master clocks in "set_sysclk" API.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
-Suggested-by: Shengjiu Wang <shengjiu.wang@nxp.com>
-Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
-Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 5 ++++-
- sound/soc/fsl/fsl_sai.h | 1 +
- 2 files changed, 5 insertions(+), 1 deletion(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -240,7 +240,10 @@ static int fsl_sai_set_dai_sysclk(struct
- 	if (dir == SND_SOC_CLOCK_IN)
- 		return 0;
- 
--	sai->bitclk_freq = freq;
-+	if (clk_id == FSL_SAI_CLK_BIT) {
-+		sai->bitclk_freq = freq;
-+		return 0;
-+	}
- 
- 	ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq,
- 					FSL_FMT_TRANSMITTER);
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -160,6 +160,7 @@
- #define FSL_SAI_CLK_MAST3	3
- 
- #define FSL_SAI_MCLK_MAX	4
-+#define FSL_SAI_CLK_BIT		5
- 
- /* SAI data transfer numbers per DMA request */
- #define FSL_SAI_MAXBURST_TX 6
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0044-MLK-17528-3-ASoC-fsl_sai-Set-clock-rate-in-set_syscl.patch b/target/linux/layerscape/patches-5.4/801-audio-0044-MLK-17528-3-ASoC-fsl_sai-Set-clock-rate-in-set_syscl.patch
deleted file mode 100644
index da3ec8d3d8..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0044-MLK-17528-3-ASoC-fsl_sai-Set-clock-rate-in-set_syscl.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 0d9bc2f22dc418c4573ded86278e55f97d029dca Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Fri, 9 Feb 2018 11:39:58 +0200
-Subject: [PATCH] MLK-17528-3: ASoC: fsl_sai: Set clock rate in "set_sysclk"
- API
-
-Set the requested clock rate in "set_sysclk" for specified clock id.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
-Suggested-by: Shengjiu Wang <shengjiu.wang@nxp.com>
-Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
-Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -245,6 +245,25 @@ static int fsl_sai_set_dai_sysclk(struct
- 		return 0;
- 	}
- 
-+	if (freq > 0) {
-+		if (clk_id < 0 || clk_id >= FSL_SAI_MCLK_MAX) {
-+			dev_err(cpu_dai->dev, "Unknown clock id: %d\n", clk_id);
-+			return -EINVAL;
-+		}
-+
-+		if (IS_ERR_OR_NULL(sai->mclk_clk[clk_id])) {
-+			dev_err(cpu_dai->dev, "Unassigned clock: %d\n", clk_id);
-+			return -EINVAL;
-+		}
-+
-+		ret = clk_set_rate(sai->mclk_clk[clk_id], freq);
-+		if (ret < 0) {
-+			dev_err(cpu_dai->dev, "failed to set clock rate (%u): %d\n",
-+					freq, ret);
-+			return ret;
-+		}
-+	}
-+
- 	ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq,
- 					FSL_FMT_TRANSMITTER);
- 	if (ret) {
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0045-MLK-17156-1-ASoC-fsl_sai-update-register-offset-for-.patch b/target/linux/layerscape/patches-5.4/801-audio-0045-MLK-17156-1-ASoC-fsl_sai-update-register-offset-for-.patch
deleted file mode 100644
index 8189ec236d..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0045-MLK-17156-1-ASoC-fsl_sai-update-register-offset-for-.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From bed63eea982ba6d59995288a5deab94510a51994 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@nxp.com>
-Date: Tue, 6 Mar 2018 11:45:30 +0800
-Subject: [PATCH] MLK-17156-1: ASoC: fsl_sai: update register offset for ULP B0
-
-ULP B0 integrate the latest SAI IP, there is version id and
-parameter id register in the beginning, so update the offset
-for ULP B0
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
-Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -64,7 +64,7 @@ static struct fsl_sai_soc_data fsl_sai_i
- 	.fifos = 2,
- 	.fifo_depth = 16,
- 	.flags = SAI_FLAG_PMQOS,
--	.reg_offset = 0,
-+	.reg_offset = 8,
- 	.constrain_period_size = false,
- };
- 
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0046-Sound-Soc-fsl-Set-SAI-Channel-Mode-to-Output-Mode.patch b/target/linux/layerscape/patches-5.4/801-audio-0046-Sound-Soc-fsl-Set-SAI-Channel-Mode-to-Output-Mode.patch
deleted file mode 100644
index 0d8fc165e9..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0046-Sound-Soc-fsl-Set-SAI-Channel-Mode-to-Output-Mode.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From 494c1f9c5c86396d2974c6072f728e2325b72703 Mon Sep 17 00:00:00 2001
-From: Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com>
-Date: Wed, 7 Mar 2018 11:35:07 +0200
-Subject: [PATCH] Sound: Soc: fsl: Set SAI Channel Mode to Output Mode
-
-Transmit data pins will output zero when slots are masked or channels
-are disabled. In CHMOD TDM mode, transmit data pins are tri-stated when
-slots are masked or channels are disabled. When data pins are tri-stated,
-there is noise on some channels when FS clock value is high and data is
-read while fsclk is transitioning from high to low.
-
-Signed-off-by: Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com>
-Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 14 +++++++++++---
- sound/soc/fsl/fsl_sai.h |  2 ++
- 2 files changed, 13 insertions(+), 3 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -589,6 +589,11 @@ static int fsl_sai_hw_params(struct snd_
- 
- 	val_cr4 |= FSL_SAI_CR4_FRSZ(slots);
- 
-+	/* Output Mode - data pins transmit 0 when slots are masked
-+	 * or channels are disabled
-+	 */
-+	val_cr4 |= FSL_SAI_CR4_CHMOD;
-+
- 	/*
- 	 * For SAI master mode, when Tx(Rx) sync with Rx(Tx) clock, Rx(Tx) will
- 	 * generate bclk and frame clock for Tx(Rx), we should set RCR4(TCR4),
-@@ -599,14 +604,16 @@ static int fsl_sai_hw_params(struct snd_
- 	if (!sai->slave_mode[tx]) {
- 		if (!sai->synchronous[TX] && sai->synchronous[RX] && !tx) {
- 			regmap_update_bits(sai->regmap, FSL_SAI_TCR4(offset),
--				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
-+				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK |
-+				FSL_SAI_CR4_CHMOD_MASK,
- 				val_cr4);
- 			regmap_update_bits(sai->regmap, FSL_SAI_TCR5(offset),
- 				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
- 				FSL_SAI_CR5_FBT_MASK, val_cr5);
- 		} else if (!sai->synchronous[RX] && sai->synchronous[TX] && tx) {
- 			regmap_update_bits(sai->regmap, FSL_SAI_RCR4(offset),
--				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
-+				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK |
-+				FSL_SAI_CR4_CHMOD_MASK,
- 				val_cr4);
- 			regmap_update_bits(sai->regmap, FSL_SAI_RCR5(offset),
- 				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
-@@ -682,7 +689,8 @@ static int fsl_sai_hw_params(struct snd_
- 	}
- 
- 	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, offset),
--			   FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
-+			   FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK |
-+			   FSL_SAI_CR4_CHMOD_MASK,
- 			   val_cr4);
- 	regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx, offset),
- 			   FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -129,6 +129,8 @@
- #define FSL_SAI_CR4_FRSZ_MASK	(0x1f << 16)
- #define FSL_SAI_CR4_SYWD(x)	(((x) - 1) << 8)
- #define FSL_SAI_CR4_SYWD_MASK	(0x1f << 8)
-+#define FSL_SAI_CR4_CHMOD	(1 << 5)
-+#define FSL_SAI_CR4_CHMOD_MASK	(1 << 5)
- #define FSL_SAI_CR4_MF		BIT(4)
- #define FSL_SAI_CR4_FSE		BIT(3)
- #define FSL_SAI_CR4_FSP		BIT(1)
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0047-MLK-17580-ASoC-fsl-dsd-Add-DSD-utilities-helper.patch b/target/linux/layerscape/patches-5.4/801-audio-0047-MLK-17580-ASoC-fsl-dsd-Add-DSD-utilities-helper.patch
deleted file mode 100644
index 9290b3b9cb..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0047-MLK-17580-ASoC-fsl-dsd-Add-DSD-utilities-helper.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From e28e3e0d01c0fcb628e841977b51c45189b43f47 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Thu, 8 Mar 2018 14:37:30 +0200
-Subject: [PATCH] MLK-17580: ASoC: fsl: dsd: Add DSD utilities helper
-
-Add DSD utilities helper.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
-Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com
----
- sound/soc/fsl/fsl_dsd.h | 59 +++++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 59 insertions(+)
- create mode 100644 sound/soc/fsl/fsl_dsd.h
-
---- /dev/null
-+++ b/sound/soc/fsl/fsl_dsd.h
-@@ -0,0 +1,59 @@
-+/*
-+ * Copyright 2018 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef __FSL_DSD_H
-+#define __FSL_DSD_H
-+
-+#include <linux/pinctrl/consumer.h>
-+#include <sound/pcm_params.h>
-+#include <sound/soc.h>
-+
-+static bool fsl_is_dsd(struct snd_pcm_hw_params *params)
-+{
-+	snd_pcm_format_t format = params_format(params);
-+
-+	switch (format) {
-+	case SNDRV_PCM_FORMAT_DSD_U8:
-+	case SNDRV_PCM_FORMAT_DSD_U16_LE:
-+	case SNDRV_PCM_FORMAT_DSD_U16_BE:
-+	case SNDRV_PCM_FORMAT_DSD_U32_LE:
-+	case SNDRV_PCM_FORMAT_DSD_U32_BE:
-+		return true;
-+	default:
-+		return false;
-+	}
-+}
-+
-+static struct pinctrl_state *fsl_get_pins_state(struct pinctrl *pinctrl,
-+	struct snd_pcm_hw_params *params)
-+{
-+	int dsd_bclk;
-+	struct pinctrl_state *state = 0;
-+
-+	if (fsl_is_dsd(params)) {
-+		dsd_bclk = params_rate(params) * params_physical_width(params);
-+
-+		switch (dsd_bclk) {
-+		case 22579200: /* DSD512 */
-+			state = pinctrl_lookup_state(pinctrl, "dsd512");
-+			break;
-+		}
-+
-+		/* Get default DSD state */
-+		if (IS_ERR_OR_NULL(state))
-+			state = pinctrl_lookup_state(pinctrl, "dsd");
-+	}
-+
-+	/* Get default state */
-+	if (IS_ERR_OR_NULL(state))
-+		state = pinctrl_lookup_state(pinctrl, "default");
-+
-+	return state;
-+}
-+
-+#endif /* __FSL_DSD_H */
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0048-MLK-17580-ASoC-fsl-sai-Use-DSD-helper.patch b/target/linux/layerscape/patches-5.4/801-audio-0048-MLK-17580-ASoC-fsl-sai-Use-DSD-helper.patch
deleted file mode 100644
index edfbd57fb2..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0048-MLK-17580-ASoC-fsl-sai-Use-DSD-helper.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 0a71cfbd55ba50414bfcb4ecccf656a580930790 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Thu, 8 Mar 2018 14:43:34 +0200
-Subject: [PATCH] MLK-17580: ASoC: fsl: sai: Use DSD helper
-
-Replace DSD related code with calls to DSD helper functions.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
-Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com
----
- sound/soc/fsl/fsl_sai.c | 34 +++++++++++-----------------------
- sound/soc/fsl/fsl_sai.h |  2 +-
- 2 files changed, 12 insertions(+), 24 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -22,6 +22,7 @@
- #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
- #include <linux/pm_runtime.h>
- 
-+#include "fsl_dsd.h"
- #include "fsl_sai.h"
- #include "imx-pcm.h"
- 
-@@ -523,31 +524,21 @@ static int fsl_sai_hw_params(struct snd_
- 	int ret;
- 	int i;
- 	int trce_mask = 0;
--	snd_pcm_format_t format = params_format(params);
- 
- 	if (sai->slots)
- 		slots = sai->slots;
- 
- 	pins = DIV_ROUND_UP(channels, slots);
-+	sai->is_dsd = fsl_is_dsd(params);
-+	sai->pins_state = fsl_get_pins_state(sai->pinctrl, params);
- 
--	if (format == SNDRV_PCM_FORMAT_DSD_U8 ||
--		format == SNDRV_PCM_FORMAT_DSD_U16_LE ||
--		format == SNDRV_PCM_FORMAT_DSD_U16_BE ||
--		format == SNDRV_PCM_FORMAT_DSD_U32_LE ||
--		format == SNDRV_PCM_FORMAT_DSD_U32_BE) {
--		sai->is_dsd = true;
--
--		if (!IS_ERR_OR_NULL(sai->pins_dsd)) {
--			ret = pinctrl_select_state(sai->pinctrl, sai->pins_dsd);
--			if (ret) {
--				dev_err(cpu_dai->dev,
--					"failed to set proper pins state: %d\n", ret);
--				return ret;
--			}
-+	if (!IS_ERR_OR_NULL(sai->pins_state)) {
-+		ret = pinctrl_select_state(sai->pinctrl, sai->pins_state);
-+		if (ret) {
-+			dev_err(cpu_dai->dev,
-+				"failed to set proper pins state: %d\n", ret);
-+			return ret;
- 		}
--	} else {
--		pinctrl_pm_select_default_state(cpu_dai->dev);
--		sai->is_dsd = false;
- 	}
- 
- 	if (sai->is_dsd)
-@@ -929,8 +920,8 @@ static int fsl_sai_dai_resume(struct snd
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
- 	int ret;
- 
--	if (sai->is_dsd && !IS_ERR_OR_NULL(sai->pins_dsd)) {
--		ret = pinctrl_select_state(sai->pinctrl, sai->pins_dsd);
-+	if (!IS_ERR_OR_NULL(sai->pins_state)) {
-+		ret = pinctrl_select_state(sai->pinctrl, sai->pins_state);
- 		if (ret) {
- 			dev_err(cpu_dai->dev,
- 				"failed to set proper pins state: %d\n", ret);
-@@ -1357,9 +1348,6 @@ static int fsl_sai_probe(struct platform
- 
- 	sai->pinctrl  = devm_pinctrl_get(&pdev->dev);
- 
--	if (!IS_ERR_OR_NULL(sai->pinctrl))
--		sai->pins_dsd = pinctrl_lookup_state(sai->pinctrl, "dsd");
--
- 	platform_set_drvdata(pdev, sai);
- 
- 	pm_runtime_enable(&pdev->dev);
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -212,7 +212,7 @@ struct fsl_sai {
- 	const struct fsl_sai_soc_data *soc;
- 	struct pm_qos_request pm_qos_req;
- 	struct pinctrl *pinctrl;
--	struct pinctrl_state *pins_dsd;
-+	struct pinctrl_state *pins_state;
- };
- 
- #define TX 1
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0049-MLK-17580-ASoC-fsl-sai-check-for-pinctrl-status.patch b/target/linux/layerscape/patches-5.4/801-audio-0049-MLK-17580-ASoC-fsl-sai-check-for-pinctrl-status.patch
deleted file mode 100644
index f93bdfe63e..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0049-MLK-17580-ASoC-fsl-sai-check-for-pinctrl-status.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 12b887445779c33285dac5279fc02fd80e0800d8 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Fri, 9 Mar 2018 12:41:42 +0200
-Subject: [PATCH] MLK-17580: ASoC: fsl: sai: check for pinctrl status
-
-For some cases (like AMIX) pinctrl may be null - this
-breaks SAI functionality. Enforce pinctrl null pointer
-checking prior calling any function which involves
-pins state changes.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 21 ++++++++++++---------
- 1 file changed, 12 insertions(+), 9 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -530,14 +530,17 @@ static int fsl_sai_hw_params(struct snd_
- 
- 	pins = DIV_ROUND_UP(channels, slots);
- 	sai->is_dsd = fsl_is_dsd(params);
--	sai->pins_state = fsl_get_pins_state(sai->pinctrl, params);
- 
--	if (!IS_ERR_OR_NULL(sai->pins_state)) {
--		ret = pinctrl_select_state(sai->pinctrl, sai->pins_state);
--		if (ret) {
--			dev_err(cpu_dai->dev,
--				"failed to set proper pins state: %d\n", ret);
--			return ret;
-+	if (!IS_ERR_OR_NULL(sai->pinctrl)) {
-+		sai->pins_state = fsl_get_pins_state(sai->pinctrl, params);
-+
-+		if (!IS_ERR_OR_NULL(sai->pins_state)) {
-+			ret = pinctrl_select_state(sai->pinctrl, sai->pins_state);
-+			if (ret) {
-+				dev_err(cpu_dai->dev,
-+					"failed to set proper pins state: %d\n", ret);
-+				return ret;
-+			}
- 		}
- 	}
- 
-@@ -920,7 +923,7 @@ static int fsl_sai_dai_resume(struct snd
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
- 	int ret;
- 
--	if (!IS_ERR_OR_NULL(sai->pins_state)) {
-+	if (!IS_ERR_OR_NULL(sai->pinctrl) && !IS_ERR_OR_NULL(sai->pins_state)) {
- 		ret = pinctrl_select_state(sai->pinctrl, sai->pins_state);
- 		if (ret) {
- 			dev_err(cpu_dai->dev,
-@@ -1346,7 +1349,7 @@ static int fsl_sai_probe(struct platform
- 	sai->dma_params_rx.maxburst = FSL_SAI_MAXBURST_RX;
- 	sai->dma_params_tx.maxburst = FSL_SAI_MAXBURST_TX;
- 
--	sai->pinctrl  = devm_pinctrl_get(&pdev->dev);
-+	sai->pinctrl = devm_pinctrl_get(&pdev->dev);
- 
- 	platform_set_drvdata(pdev, sai);
- 
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0050-MLK-17531-1-ASoC-fsl-sai-add-support-for-SAI-v3.01.patch b/target/linux/layerscape/patches-5.4/801-audio-0050-MLK-17531-1-ASoC-fsl-sai-add-support-for-SAI-v3.01.patch
deleted file mode 100644
index 0df0f2fa93..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0050-MLK-17531-1-ASoC-fsl-sai-add-support-for-SAI-v3.01.patch
+++ /dev/null
@@ -1,250 +0,0 @@
-From 63b81694ef7736849dcf7f7daf0becc6ebc02844 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Mon, 14 May 2018 16:28:48 +0300
-Subject: [PATCH] MLK-17531-1: ASoC: fsl: sai: add support for SAI v3.01
-
-a) Add support for new SAI (VERID, PARAM, MCTL, MDIV) registers
-   available in i.MX 850d (SAI v3.00) and i.MX 845s (SAI v3.01).
-b) Handle SAI MCLK register as function of SAI IP version.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
-Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++++-
- sound/soc/fsl/fsl_sai.h | 59 +++++++++++++++++++++++++++++++++++++++++++-
- 2 files changed, 122 insertions(+), 2 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -29,6 +29,8 @@
- #define FSL_SAI_FLAGS (FSL_SAI_CSR_SEIE |\
- 		       FSL_SAI_CSR_FEIE)
- 
-+#define FSL_SAI_VERID_0301	0x0301
-+
- static struct fsl_sai_soc_data fsl_sai_vf610 = {
- 	.imx = false,
- 	/*dataline is mask, not index*/
-@@ -422,6 +424,48 @@ static int fsl_sai_set_dai_fmt(struct sn
- 	return ret;
- }
- 
-+static int fsl_sai_check_ver(struct snd_soc_dai *cpu_dai)
-+{
-+	struct fsl_sai *sai = dev_get_drvdata(cpu_dai->dev);
-+	unsigned char offset = sai->soc->reg_offset;
-+	unsigned int val;
-+
-+	if (FSL_SAI_TCSR(offset) == FSL_SAI_VERID)
-+		return 0;
-+
-+	if (sai->verid.loaded)
-+		return 0;
-+
-+	sai->verid.loaded = true;
-+	regmap_read(sai->regmap, FSL_SAI_VERID, &val);
-+	dev_dbg(cpu_dai->dev, "VERID: 0x%016X\n", val);
-+
-+	sai->verid.id = (val & FSL_SAI_VER_ID_MASK) >> FSL_SAI_VER_ID_SHIFT;
-+	sai->verid.extfifo_en = (val & FSL_SAI_VER_EFIFO_EN);
-+	sai->verid.timestamp_en = (val & FSL_SAI_VER_TSTMP_EN);
-+
-+	regmap_read(sai->regmap, FSL_SAI_PARAM, &val);
-+	dev_dbg(cpu_dai->dev, "PARAM: 0x%016X\n", val);
-+
-+	/* max slots per frame, power of 2 */
-+	sai->param.spf = 1 <<
-+		((val & FSL_SAI_PAR_SPF_MASK) >> FSL_SAI_PAR_SPF_SHIFT);
-+
-+	/* words per fifo, power of 2 */
-+	sai->param.wpf = 1 <<
-+		((val & FSL_SAI_PAR_WPF_MASK) >> FSL_SAI_PAR_WPF_SHIFT);
-+
-+	/* number of datalines implemented */
-+	sai->param.dln = val & FSL_SAI_PAR_DLN_MASK;
-+
-+	dev_dbg(cpu_dai->dev,
-+		"Version: 0x%08X, SPF: %u, WPF: %u, DLN: %u\n",
-+		sai->verid.id, sai->param.spf, sai->param.wpf, sai->param.dln
-+	);
-+
-+	return 0;
-+}
-+
- static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai);
-@@ -502,6 +546,15 @@ static int fsl_sai_set_bclk(struct snd_s
- 				   FSL_SAI_CR2_DIV_MASK, savediv - 1);
- 	}
- 
-+	fsl_sai_check_ver(dai);
-+	switch (sai->verid.id) {
-+	case FSL_SAI_VERID_0301:
-+		/* SAI is in master mode at this point, so enable MCLK */
-+		regmap_update_bits(sai->regmap, FSL_SAI_MCTL,
-+				FSL_SAI_MCTL_MCLK_EN, FSL_SAI_MCTL_MCLK_EN);
-+		break;
-+	}
-+
- 	dev_dbg(dai->dev, "best fit: clock id=%d, div=%d, deviation =%d\n",
- 			sai->mclk_id[tx], savediv, savesub);
- 
-@@ -1001,6 +1054,8 @@ static struct reg_default fsl_sai_v3_reg
- 	{FSL_SAI_RCR4(8), 0},
- 	{FSL_SAI_RCR5(8), 0},
- 	{FSL_SAI_RMR,  0},
-+	{FSL_SAI_MCTL, 0},
-+	{FSL_SAI_MDIV, 0},
- };
- 
- static bool fsl_sai_readable_reg(struct device *dev, unsigned int reg)
-@@ -1041,6 +1096,10 @@ static bool fsl_sai_readable_reg(struct
- 	case FSL_SAI_RFR6:
- 	case FSL_SAI_RFR7:
- 	case FSL_SAI_RMR:
-+	case FSL_SAI_MCTL:
-+	case FSL_SAI_MDIV:
-+	case FSL_SAI_VERID:
-+	case FSL_SAI_PARAM:
- 		return true;
- 	default:
- 		return false;
-@@ -1056,6 +1115,8 @@ static bool fsl_sai_volatile_reg(struct
- 		return true;
- 
- 	switch (reg) {
-+	case FSL_SAI_VERID:
-+	case FSL_SAI_PARAM:
- 	case FSL_SAI_TFR0:
- 	case FSL_SAI_TFR1:
- 	case FSL_SAI_TFR2:
-@@ -1108,6 +1169,8 @@ static bool fsl_sai_writeable_reg(struct
- 	case FSL_SAI_TDR7:
- 	case FSL_SAI_TMR:
- 	case FSL_SAI_RMR:
-+	case FSL_SAI_MCTL:
-+	case FSL_SAI_MDIV:
- 		return true;
- 	default:
- 		return false;
-@@ -1133,7 +1196,7 @@ static const struct regmap_config fsl_sa
- 	.reg_stride = 4,
- 	.val_bits = 32,
- 
--	.max_register = FSL_SAI_RMR,
-+	.max_register = FSL_SAI_MDIV,
- 	.reg_defaults = fsl_sai_v3_reg_defaults,
- 	.num_reg_defaults = ARRAY_SIZE(fsl_sai_v3_reg_defaults),
- 	.readable_reg = fsl_sai_readable_reg,
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -17,6 +17,8 @@
- 			 SNDRV_PCM_FMTBIT_DSD_U32_LE)
- 
- /* SAI Register Map Register */
-+#define FSL_SAI_VERID	0x00 /* SAI Version ID Register */
-+#define FSL_SAI_PARAM	0x04 /* SAI Parameter Register */
- #define FSL_SAI_TCSR(offset) (0x00 + offset) /* SAI Transmit Control */
- #define FSL_SAI_TCR1(offset) (0x04 + offset) /* SAI Transmit Configuration 1 */
- #define FSL_SAI_TCR2(offset) (0x08 + offset) /* SAI Transmit Configuration 2 */
-@@ -39,8 +41,12 @@
- #define FSL_SAI_TFR5    0x54 /* SAI Transmit FIFO */
- #define FSL_SAI_TFR6    0x58 /* SAI Transmit FIFO */
- #define FSL_SAI_TFR7    0x5C /* SAI Transmit FIFO */
--#define FSL_SAI_TFR	0x40 /* SAI Transmit FIFO */
- #define FSL_SAI_TMR	0x60 /* SAI Transmit Mask */
-+#define FSL_SAI_TTCTL	0x70 /* SAI Transmit Timestamp Control Register */
-+#define FSL_SAI_TTCTN	0x74 /* SAI Transmit Timestamp Counter Register */
-+#define FSL_SAI_TBCTN	0x78 /* SAI Transmit Bit Counter Register */
-+#define FSL_SAI_TTCAP	0x7C /* SAI Transmit Timestamp Capture */
-+
- #define FSL_SAI_RCSR(offset) (0x80 + offset) /* SAI Receive Control */
- #define FSL_SAI_RCR1(offset) (0x84 + offset) /* SAI Receive Configuration 1 */
- #define FSL_SAI_RCR2(offset) (0x88 + offset) /* SAI Receive Configuration 2 */
-@@ -64,6 +70,13 @@
- #define FSL_SAI_RFR6    0xd8 /* SAI Receive FIFO */
- #define FSL_SAI_RFR7    0xdc /* SAI Receive FIFO */
- #define FSL_SAI_RMR	0xe0 /* SAI Receive Mask */
-+#define FSL_SAI_RTCTL	0xf0 /* SAI Receive Timestamp Control Register */
-+#define FSL_SAI_RTCTN	0xf4 /* SAI Receive Timestamp Counter Register */
-+#define FSL_SAI_RBCTN	0xf8 /* SAI Receive Bit Counter Register */
-+#define FSL_SAI_RTCAP	0xfc /* SAI Receive Timestamp Capture */
-+
-+#define FSL_SAI_MCTL	0x100 /* SAI MCLK Control Register */
-+#define FSL_SAI_MDIV	0x104 /* SAI MCLK Divide Register */
- 
- #define FSL_SAI_xCSR(tx, off)	(tx ? FSL_SAI_TCSR(off) : FSL_SAI_RCSR(off))
- #define FSL_SAI_xCR1(tx, off)	(tx ? FSL_SAI_TCR1(off) : FSL_SAI_RCR1(off))
-@@ -109,6 +122,7 @@
- #define FSL_SAI_CR2_MSEL(ID)	((ID) << 26)
- #define FSL_SAI_CR2_BCP		BIT(25)
- #define FSL_SAI_CR2_BCD_MSTR	BIT(24)
-+#define FSL_SAI_CR2_BCBP	BIT(23) /* BCLK bypass */
- #define FSL_SAI_CR2_DIV_MASK	0xff
- 
- /* SAI Transmit and Receive Configuration 3 Register */
-@@ -144,6 +158,33 @@
- #define FSL_SAI_CR5_FBT(x)	((x) << 8)
- #define FSL_SAI_CR5_FBT_MASK	(0x1f << 8)
- 
-+/* SAI MCLK Control Register */
-+#define FSL_SAI_MCTL_MCLK_EN	BIT(30)	/* MCLK Enable */
-+#define FSL_SAI_MCTL_MSEL_MASK	(0x3 << 24)
-+#define FSL_SAI_MCTL_MSEL(ID)   ((ID) << 24)
-+#define FSL_SAI_MCTL_MSEL_BUS	0
-+#define FSL_SAI_MCTL_MSEL_MCLK1	BIT(24)
-+#define FSL_SAI_MCTL_MSEL_MCLK2	BIT(25)
-+#define FSL_SAI_MCTL_MSEL_MCLK3	(BIT(24) | BIT(25))
-+#define FSL_SAI_MCTL_DIV_EN	BIT(23)
-+#define FSL_SAI_MCTL_DIV_MASK	0xFF
-+
-+/* SAI VERID Register */
-+#define FSL_SAI_VER_ID_SHIFT	16
-+#define FSL_SAI_VER_ID_MASK	(0xFFFF << FSL_SAI_VER_ID_SHIFT)
-+#define FSL_SAI_VER_EFIFO_EN	BIT(0)
-+#define FSL_SAI_VER_TSTMP_EN	BIT(1)
-+
-+/* SAI PARAM Register */
-+#define FSL_SAI_PAR_SPF_SHIFT	16
-+#define FSL_SAI_PAR_SPF_MASK	(0x0F << FSL_SAI_PAR_SPF_SHIFT)
-+#define FSL_SAI_PAR_WPF_SHIFT	8
-+#define FSL_SAI_PAR_WPF_MASK	(0x0F << FSL_SAI_PAR_WPF_SHIFT)
-+#define FSL_SAI_PAR_DLN_MASK	(0x0F)
-+
-+/* SAI MCLK Divide Register */
-+#define FSL_SAI_MDIV_MASK	0xFFFFF
-+
- /* SAI type */
- #define FSL_SAI_DMA		BIT(0)
- #define FSL_SAI_USE_AC97	BIT(1)
-@@ -181,6 +222,19 @@ struct fsl_sai_soc_data {
- 	bool constrain_period_size;
- };
- 
-+struct fsl_sai_verid {
-+	u32 id;
-+	bool timestamp_en;
-+	bool extfifo_en;
-+	bool loaded;
-+};
-+
-+struct fsl_sai_param {
-+	u32 spf; /* max slots per frame */
-+	u32 wpf; /* words in fifo */
-+	u32 dln; /* number of datalines implemented */
-+};
-+
- struct fsl_sai {
- 	struct platform_device *pdev;
- 	struct regmap *regmap;
-@@ -213,6 +267,9 @@ struct fsl_sai {
- 	struct pm_qos_request pm_qos_req;
- 	struct pinctrl *pinctrl;
- 	struct pinctrl_state *pins_state;
-+
-+	struct fsl_sai_verid verid;
-+	struct fsl_sai_param param;
- };
- 
- #define TX 1
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0051-MLK-18534-1-ASoC-fsl-sai-introduce-1-1-bclk-mclk-rat.patch b/target/linux/layerscape/patches-5.4/801-audio-0051-MLK-18534-1-ASoC-fsl-sai-introduce-1-1-bclk-mclk-rat.patch
deleted file mode 100644
index 31033000c8..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0051-MLK-18534-1-ASoC-fsl-sai-introduce-1-1-bclk-mclk-rat.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From 2e891d3d62f5fd51e33ae6e614198ce0b3b48e95 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Wed, 6 Jun 2018 13:36:20 +0300
-Subject: [PATCH] MLK-18534-1: ASoC: fsl: sai: introduce 1:1 bclk:mclk ratio
- support
-
-Since IP version 3.01 (845s) SAI has support for 1:1
-bclk:mclk ratio.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 69 +++++++++++++++++++++++++------------------------
- sound/soc/fsl/fsl_sai.h |  2 +-
- 2 files changed, 36 insertions(+), 35 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -471,7 +471,8 @@ static int fsl_sai_set_bclk(struct snd_s
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai);
- 	unsigned char offset = sai->soc->reg_offset;
- 	unsigned long clk_rate;
--	u32 savediv = 0, ratio, savesub = freq;
-+	unsigned int reg = 0;
-+	u32 ratio, savesub = freq, saveratio = 0, savediv = 0;
- 	u32 id;
- 	int ret = 0;
- 
-@@ -479,6 +480,8 @@ static int fsl_sai_set_bclk(struct snd_s
- 	if (sai->slave_mode[tx])
- 		return 0;
- 
-+	fsl_sai_check_ver(dai);
-+
- 	for (id = 0; id < FSL_SAI_MCLK_MAX; id++) {
- 		clk_rate = clk_get_rate(sai->mclk_clk[id]);
- 		if (!clk_rate)
-@@ -499,22 +502,21 @@ static int fsl_sai_set_bclk(struct snd_s
- 			"ratio %d for freq %dHz based on clock %ldHz\n",
- 			ratio, freq, clk_rate);
- 
--		if (ratio % 2 == 0 && ratio >= 2 && ratio <= 512)
--			ratio /= 2;
--		else
--			continue;
-+		if ((ratio % 2 == 0 && ratio >= 2 && ratio <= 512) ||
-+		    (ratio == 1 && sai->verid.id >= FSL_SAI_VERID_0301)) {
- 
--		if (ret < savesub) {
--			savediv = ratio;
--			sai->mclk_id[tx] = id;
--			savesub = ret;
--		}
-+			if (ret < savesub) {
-+				saveratio = ratio;
-+				sai->mclk_id[tx] = id;
-+				savesub = ret;
-+			}
- 
--		if (ret == 0)
--			break;
-+			if (ret == 0)
-+				break;
-+		}
- 	}
- 
--	if (savediv == 0) {
-+	if (saveratio == 0) {
- 		dev_err(dai->dev, "failed to derive required %cx rate: %d\n",
- 				tx ? 'T' : 'R', freq);
- 		return -EINVAL;
-@@ -530,33 +532,32 @@ static int fsl_sai_set_bclk(struct snd_s
- 	 * 4) For Tx and Rx are both Synchronous with another SAI, we just
- 	 *    ignore it.
- 	 */
--	if ((sai->synchronous[TX] && !sai->synchronous[RX]) ||
--	    (!tx && !sai->synchronous[RX])) {
--		regmap_update_bits(sai->regmap, FSL_SAI_RCR2(offset),
--				   FSL_SAI_CR2_MSEL_MASK,
--				   FSL_SAI_CR2_MSEL(sai->mclk_id[tx]));
--		regmap_update_bits(sai->regmap, FSL_SAI_RCR2(offset),
--				   FSL_SAI_CR2_DIV_MASK, savediv - 1);
--	} else if ((sai->synchronous[RX] && !sai->synchronous[TX]) ||
--		   (tx && !sai->synchronous[TX])) {
--		regmap_update_bits(sai->regmap, FSL_SAI_TCR2(offset),
--				   FSL_SAI_CR2_MSEL_MASK,
--				   FSL_SAI_CR2_MSEL(sai->mclk_id[tx]));
--		regmap_update_bits(sai->regmap, FSL_SAI_TCR2(offset),
--				   FSL_SAI_CR2_DIV_MASK, savediv - 1);
-+	if ((!tx || sai->synchronous[TX]) && !sai->synchronous[RX])
-+		reg = FSL_SAI_RCR2(offset);
-+	else if ((tx || sai->synchronous[RX]) && !sai->synchronous[TX])
-+		reg = FSL_SAI_TCR2(offset);
-+
-+	if (reg) {
-+		regmap_update_bits(sai->regmap, reg, FSL_SAI_CR2_MSEL_MASK,
-+			   FSL_SAI_CR2_MSEL(sai->mclk_id[tx]));
-+
-+		savediv = (saveratio == 1 ? 0 : (saveratio >> 1) - 1);
-+		regmap_update_bits(sai->regmap, reg, FSL_SAI_CR2_DIV_MASK, savediv);
-+
-+		if (sai->verid.id >= FSL_SAI_VERID_0301) {
-+			regmap_update_bits(sai->regmap, reg, FSL_SAI_CR2_BYP,
-+				   (saveratio == 1 ? FSL_SAI_CR2_BYP : 0));
-+		}
- 	}
- 
--	fsl_sai_check_ver(dai);
--	switch (sai->verid.id) {
--	case FSL_SAI_VERID_0301:
-+	if (sai->verid.id >= FSL_SAI_VERID_0301) {
- 		/* SAI is in master mode at this point, so enable MCLK */
- 		regmap_update_bits(sai->regmap, FSL_SAI_MCTL,
--				FSL_SAI_MCTL_MCLK_EN, FSL_SAI_MCTL_MCLK_EN);
--		break;
-+			FSL_SAI_MCTL_MCLK_EN, FSL_SAI_MCTL_MCLK_EN);
- 	}
- 
--	dev_dbg(dai->dev, "best fit: clock id=%d, div=%d, deviation =%d\n",
--			sai->mclk_id[tx], savediv, savesub);
-+	dev_dbg(dai->dev, "best fit: clock id=%d, ratio=%d, deviation=%d\n",
-+			sai->mclk_id[tx], saveratio, savesub);
- 
- 	return 0;
- }
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -122,7 +122,7 @@
- #define FSL_SAI_CR2_MSEL(ID)	((ID) << 26)
- #define FSL_SAI_CR2_BCP		BIT(25)
- #define FSL_SAI_CR2_BCD_MSTR	BIT(24)
--#define FSL_SAI_CR2_BCBP	BIT(23) /* BCLK bypass */
-+#define FSL_SAI_CR2_BYP		BIT(23) /* BCLK bypass */
- #define FSL_SAI_CR2_DIV_MASK	0xff
- 
- /* SAI Transmit and Receive Configuration 3 Register */
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0052-MLK-18682-1-ASoC-fsl-sai-use-set_bclk_ratio-to-calcu.patch b/target/linux/layerscape/patches-5.4/801-audio-0052-MLK-18682-1-ASoC-fsl-sai-use-set_bclk_ratio-to-calcu.patch
deleted file mode 100644
index 281974fc6b..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0052-MLK-18682-1-ASoC-fsl-sai-use-set_bclk_ratio-to-calcu.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From fc4146698489c4725c9ac86ea3e0484914d5285b Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Wed, 27 Jun 2018 10:31:02 +0300
-Subject: [PATCH] MLK-18682-1: ASoC: fsl: sai: use set_bclk_ratio to calculate
- BCLK freq (part 1)
-
-ALSA API has a standard way to configure DAI BCLK by calling
-"snd_soc_dai_set_bclk_ratio" function. So use it to set BCLK ratio
-and calculate SAI BCLK frequency.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
-[ Aisheng: split machine imx-pdm changes ]
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 21 +++++++++++++--------
- sound/soc/fsl/fsl_sai.h |  3 +--
- 2 files changed, 14 insertions(+), 10 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -234,6 +234,14 @@ static int fsl_sai_set_dai_sysclk_tr(str
- 	return 0;
- }
- 
-+static int fsl_sai_set_dai_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio)
-+{
-+	struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai);
-+
-+	sai->bitclk_ratio = ratio;
-+	return 0;
-+}
-+
- static int fsl_sai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
- 		int clk_id, unsigned int freq, int dir)
- {
-@@ -243,11 +251,6 @@ static int fsl_sai_set_dai_sysclk(struct
- 	if (dir == SND_SOC_CLOCK_IN)
- 		return 0;
- 
--	if (clk_id == FSL_SAI_CLK_BIT) {
--		sai->bitclk_freq = freq;
--		return 0;
--	}
--
- 	if (freq > 0) {
- 		if (clk_id < 0 || clk_id >= FSL_SAI_MCLK_MAX) {
- 			dev_err(cpu_dai->dev, "Unknown clock id: %d\n", clk_id);
-@@ -571,6 +574,7 @@ static int fsl_sai_hw_params(struct snd_
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 	unsigned int channels = params_channels(params);
- 	u32 word_width = params_width(params);
-+	u32 rate = params_rate(params);
- 	u32 val_cr4 = 0, val_cr5 = 0;
- 	u32 slots = (channels == 1) ? 2 : channels;
- 	u32 slot_width = word_width;
-@@ -605,12 +609,12 @@ static int fsl_sai_hw_params(struct snd_
- 		slot_width = sai->slot_width;
- 
- 	if (!sai->slave_mode[tx]) {
--		if (sai->bitclk_freq)
-+		if (sai->bitclk_ratio)
- 			ret = fsl_sai_set_bclk(cpu_dai, tx,
--					sai->bitclk_freq);
-+					rate * sai->bitclk_ratio);
- 		else
- 			ret = fsl_sai_set_bclk(cpu_dai, tx,
--				slots * slot_width * params_rate(params));
-+					rate * slots * slot_width);
- 		if (ret)
- 			return ret;
- 
-@@ -935,6 +939,7 @@ static void fsl_sai_shutdown(struct snd_
- }
- 
- static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
-+	.set_bclk_ratio = fsl_sai_set_dai_bclk_ratio,
- 	.set_sysclk	= fsl_sai_set_dai_sysclk,
- 	.set_fmt	= fsl_sai_set_dai_fmt,
- 	.set_tdm_slot	= fsl_sai_set_dai_tdm_slot,
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -203,7 +203,6 @@
- #define FSL_SAI_CLK_MAST3	3
- 
- #define FSL_SAI_MCLK_MAX	4
--#define FSL_SAI_CLK_BIT		5
- 
- /* SAI data transfer numbers per DMA request */
- #define FSL_SAI_MAXBURST_TX 6
-@@ -258,7 +257,7 @@ struct fsl_sai {
- 	unsigned int mclk_streams;
- 	unsigned int slots;
- 	unsigned int slot_width;
--	unsigned int bitclk_freq;
-+	unsigned int bitclk_ratio;
- 
- 	struct snd_soc_dai_driver cpu_dai_drv;
- 	struct snd_dmaengine_dai_dma_data dma_params_rx;
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0053-MLK-18682-2-ASoC-fsl-sai-allow-dynamic-pll-switching.patch b/target/linux/layerscape/patches-5.4/801-audio-0053-MLK-18682-2-ASoC-fsl-sai-allow-dynamic-pll-switching.patch
deleted file mode 100644
index 373305d1c9..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0053-MLK-18682-2-ASoC-fsl-sai-allow-dynamic-pll-switching.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From b2dd96ec88b7eb4288ca39a1fc78176872c0683b Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Wed, 27 Jun 2018 10:59:12 +0300
-Subject: [PATCH] MLK-18682-2: ASoC: fsl: sai: allow dynamic pll switching
-
-Currently SAI master clock derives from an audio pll that cannot be
-changed at runtime. iMX8 SoC has 2 audio plls usually configured to support
-either 8000Hz (8k,16k,32k,48k,etc) or 11025Hz (11k,22k,44.1k,88.2k,etc)
-ranges of rates - thus at runtime a SAI interface is able to play only one
-range of rates. The patch allows dynamic SAI master clock reparenting to
-the appropriate audio pll as function of the audio stream rate to be
-played/recorded.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 60 ++++++++++++++++++++++++++++++++++++++++++++-----
- sound/soc/fsl/fsl_sai.h |  2 ++
- 2 files changed, 57 insertions(+), 5 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -5,6 +5,7 @@
- // Copyright 2012-2016 Freescale Semiconductor, Inc.
- 
- #include <linux/clk.h>
-+#include <linux/clk-provider.h>
- #include <linux/delay.h>
- #include <linux/dmaengine.h>
- #include <linux/module.h>
-@@ -234,6 +235,50 @@ static int fsl_sai_set_dai_sysclk_tr(str
- 	return 0;
- }
- 
-+static int fsl_sai_set_mclk_rate(struct snd_soc_dai *dai, int clk_id,
-+		unsigned int freq)
-+{
-+	struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai);
-+	struct clk *p = sai->mclk_clk[clk_id], *pll = 0, *npll = 0;
-+	u64 ratio = freq;
-+	int ret;
-+
-+	while (p && sai->pll8k_clk && sai->pll11k_clk) {
-+		struct clk *pp = clk_get_parent(p);
-+
-+		if (clk_is_match(pp, sai->pll8k_clk) ||
-+		    clk_is_match(pp, sai->pll11k_clk)) {
-+			pll = pp;
-+			break;
-+		}
-+		p = pp;
-+	}
-+
-+	if (pll) {
-+		npll = (do_div(ratio, 8000) ? sai->pll11k_clk : sai->pll8k_clk);
-+		if (!clk_is_match(pll, npll)) {
-+			if (sai->mclk_streams == 0) {
-+				ret = clk_set_parent(p, npll);
-+				if (ret < 0)
-+					dev_warn(dai->dev,
-+						"failed to set parent %s: %d\n",
-+						__clk_get_name(npll), ret);
-+			} else {
-+				dev_err(dai->dev,
-+					"PLL %s is in use by a running stream.\n",
-+					__clk_get_name(pll));
-+				return -EINVAL;
-+			}
-+		}
-+	}
-+
-+	ret = clk_set_rate(sai->mclk_clk[clk_id], freq);
-+	if (ret < 0)
-+		dev_err(dai->dev, "failed to set clock rate (%u): %d\n",
-+				freq, ret);
-+	return ret;
-+}
-+
- static int fsl_sai_set_dai_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio)
- {
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai);
-@@ -262,12 +307,9 @@ static int fsl_sai_set_dai_sysclk(struct
- 			return -EINVAL;
- 		}
- 
--		ret = clk_set_rate(sai->mclk_clk[clk_id], freq);
--		if (ret < 0) {
--			dev_err(cpu_dai->dev, "failed to set clock rate (%u): %d\n",
--					freq, ret);
-+		ret = fsl_sai_set_mclk_rate(cpu_dai, clk_id, freq);
-+		if (ret < 0)
- 			return ret;
--		}
- 	}
- 
- 	ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq,
-@@ -1288,6 +1330,14 @@ static int fsl_sai_probe(struct platform
- 		}
- 	}
- 
-+	sai->pll8k_clk = devm_clk_get(&pdev->dev, "pll8k");
-+	if (IS_ERR(sai->pll8k_clk))
-+		sai->pll8k_clk = NULL;
-+
-+	sai->pll11k_clk = devm_clk_get(&pdev->dev, "pll11k");
-+	if (IS_ERR(sai->pll11k_clk))
-+		sai->pll11k_clk = NULL;
-+
- 	if (of_find_property(np, "fsl,sai-multi-lane", NULL))
- 		sai->is_multi_lane = true;
- 
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -239,6 +239,8 @@ struct fsl_sai {
- 	struct regmap *regmap;
- 	struct clk *bus_clk;
- 	struct clk *mclk_clk[FSL_SAI_MCLK_MAX];
-+	struct clk *pll8k_clk;
-+	struct clk *pll11k_clk;
- 
- 	bool slave_mode[2];
- 	bool is_lsb_first;
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0054-MLK-18947-ASoC-fsl_sai-fix-volatile-function.patch b/target/linux/layerscape/patches-5.4/801-audio-0054-MLK-18947-ASoC-fsl_sai-fix-volatile-function.patch
deleted file mode 100644
index 7004219803..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0054-MLK-18947-ASoC-fsl_sai-fix-volatile-function.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 84b1defe99a15b96d32f4c2fecb2c8e9149f696c Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@nxp.com>
-Date: Wed, 15 Aug 2018 09:53:07 +0800
-Subject: [PATCH] MLK-18947: ASoC: fsl_sai: fix volatile function
-
-The FSL_SAI_VERID and FSL_SAI_PARAM only available
-when reg_offset is 8
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
-(cherry picked from commit 0a0695672dc7ecf07a7642ff6f99f0b9d3a26b32)
----
- sound/soc/fsl/fsl_sai.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -1162,9 +1162,11 @@ static bool fsl_sai_volatile_reg(struct
- 	if (reg == FSL_SAI_TCSR(offset) || reg == FSL_SAI_RCSR(offset))
- 		return true;
- 
-+	if (sai->soc->reg_offset == 8 && (reg == FSL_SAI_VERID ||
-+				reg == FSL_SAI_PARAM))
-+		return true;
-+
- 	switch (reg) {
--	case FSL_SAI_VERID:
--	case FSL_SAI_PARAM:
- 	case FSL_SAI_TFR0:
- 	case FSL_SAI_TFR1:
- 	case FSL_SAI_TFR2:
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0055-MLK-18898-1-ASoC-fsl_sai-select-pinctrl-state-as-fun.patch b/target/linux/layerscape/patches-5.4/801-audio-0055-MLK-18898-1-ASoC-fsl_sai-select-pinctrl-state-as-fun.patch
deleted file mode 100644
index 2912d7632d..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0055-MLK-18898-1-ASoC-fsl_sai-select-pinctrl-state-as-fun.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 001937cc21a05165530c0775c4646bd04e797658 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Mon, 27 Aug 2018 13:50:17 +0300
-Subject: [PATCH] MLK-18898-1: ASoC: fsl_sai: select pinctrl state as function
- of bitclock rate
-
-Similar to DSD512 case we need a PCM pinctrl state option to map SAI BCLK
-to codec MCLK pin. Given that bitclock rate is function of slots number and
-slot width - pass bclk rate as parameter value from SAI driver.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
-(cherry picked from commit 826caeae32713cff7ad50de8ebc9915de975edd9)
----
- sound/soc/fsl/fsl_dsd.h | 15 +++++++--------
- sound/soc/fsl/fsl_sai.c | 24 ++++++++++--------------
- 2 files changed, 17 insertions(+), 22 deletions(-)
-
---- a/sound/soc/fsl/fsl_dsd.h
-+++ b/sound/soc/fsl/fsl_dsd.h
-@@ -30,23 +30,22 @@ static bool fsl_is_dsd(struct snd_pcm_hw
- }
- 
- static struct pinctrl_state *fsl_get_pins_state(struct pinctrl *pinctrl,
--	struct snd_pcm_hw_params *params)
-+	struct snd_pcm_hw_params *params, u32 bclk)
- {
--	int dsd_bclk;
- 	struct pinctrl_state *state = 0;
- 
- 	if (fsl_is_dsd(params)) {
--		dsd_bclk = params_rate(params) * params_physical_width(params);
--
--		switch (dsd_bclk) {
--		case 22579200: /* DSD512 */
-+		/* DSD512@44.1kHz, DSD512@48kHz */
-+		if (bclk >= 22579200)
- 			state = pinctrl_lookup_state(pinctrl, "dsd512");
--			break;
--		}
- 
- 		/* Get default DSD state */
- 		if (IS_ERR_OR_NULL(state))
- 			state = pinctrl_lookup_state(pinctrl, "dsd");
-+	} else {
-+		/* 706k32b2c, 768k32b2c, etc */
-+		if (bclk >= 45158400)
-+			state = pinctrl_lookup_state(pinctrl, "pcm_b2m");
- 	}
- 
- 	/* Get default state */
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -620,7 +620,7 @@ static int fsl_sai_hw_params(struct snd_
- 	u32 val_cr4 = 0, val_cr5 = 0;
- 	u32 slots = (channels == 1) ? 2 : channels;
- 	u32 slot_width = word_width;
--	u32 pins;
-+	u32 pins, bclk;
- 	int ret;
- 	int i;
- 	int trce_mask = 0;
-@@ -630,9 +630,16 @@ static int fsl_sai_hw_params(struct snd_
- 
- 	pins = DIV_ROUND_UP(channels, slots);
- 	sai->is_dsd = fsl_is_dsd(params);
-+	if (sai->is_dsd)
-+		pins = channels;
-+
-+	if (sai->slot_width)
-+		slot_width = sai->slot_width;
-+
-+	bclk = rate*(sai->bitclk_ratio ? sai->bitclk_ratio : slots * slot_width);
- 
- 	if (!IS_ERR_OR_NULL(sai->pinctrl)) {
--		sai->pins_state = fsl_get_pins_state(sai->pinctrl, params);
-+		sai->pins_state = fsl_get_pins_state(sai->pinctrl, params, bclk);
- 
- 		if (!IS_ERR_OR_NULL(sai->pins_state)) {
- 			ret = pinctrl_select_state(sai->pinctrl, sai->pins_state);
-@@ -644,19 +651,8 @@ static int fsl_sai_hw_params(struct snd_
- 		}
- 	}
- 
--	if (sai->is_dsd)
--		pins = channels;
--
--	if (sai->slot_width)
--		slot_width = sai->slot_width;
--
- 	if (!sai->slave_mode[tx]) {
--		if (sai->bitclk_ratio)
--			ret = fsl_sai_set_bclk(cpu_dai, tx,
--					rate * sai->bitclk_ratio);
--		else
--			ret = fsl_sai_set_bclk(cpu_dai, tx,
--					rate * slots * slot_width);
-+		ret = fsl_sai_set_bclk(cpu_dai, tx, bclk);
- 		if (ret)
- 			return ret;
- 
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0056-MLK-19573-1-ASoC-fsl-dsd-make-fsl_get_pins_state-inl.patch b/target/linux/layerscape/patches-5.4/801-audio-0056-MLK-19573-1-ASoC-fsl-dsd-make-fsl_get_pins_state-inl.patch
deleted file mode 100644
index aa405334c8..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0056-MLK-19573-1-ASoC-fsl-dsd-make-fsl_get_pins_state-inl.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 7d66ca1081c0626f03aa8f419ca253e88a10018e Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Mon, 17 Sep 2018 09:31:24 +0300
-Subject: [PATCH] MLK-19573-1: ASoC: fsl: dsd: make fsl_get_pins_state inline
-
-Make fsl_get_pins_state function inline.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
-(cherry picked from commit badcb97ebd8c0aae89f76e979bcc801be35c7400)
----
- sound/soc/fsl/fsl_dsd.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/sound/soc/fsl/fsl_dsd.h
-+++ b/sound/soc/fsl/fsl_dsd.h
-@@ -29,7 +29,7 @@ static bool fsl_is_dsd(struct snd_pcm_hw
- 	}
- }
- 
--static struct pinctrl_state *fsl_get_pins_state(struct pinctrl *pinctrl,
-+static inline struct pinctrl_state *fsl_get_pins_state(struct pinctrl *pinctrl,
- 	struct snd_pcm_hw_params *params, u32 bclk)
- {
- 	struct pinctrl_state *state = 0;
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0057-MLK-15975-3-ASoC-fsl_sai-The-offset-of-fifo_off-is-c.patch b/target/linux/layerscape/patches-5.4/801-audio-0057-MLK-15975-3-ASoC-fsl_sai-The-offset-of-fifo_off-is-c.patch
deleted file mode 100644
index 8a01eaf878..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0057-MLK-15975-3-ASoC-fsl_sai-The-offset-of-fifo_off-is-c.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From af52be88c689521364e06924e26c8989a075e0e3 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@nxp.com>
-Date: Fri, 28 Sep 2018 15:33:34 +0800
-Subject: [PATCH] MLK-15975-3: ASoC: fsl_sai: The offset of fifo_off is changed
-
-Commit 786c8bd56324 ("MLK-19734-3: dmaengine: imx-sdma: change
-fifo offset of fifo_num") change the offset of fifo_off, so
-the sai driver need to be updated.
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
-(cherry picked from commit c94ce8776e01f1f40a866d4da89603ab042dde0f)
----
- sound/soc/fsl/fsl_sai.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -726,19 +726,19 @@ static int fsl_sai_hw_params(struct snd_
- 						FSL_SAI_MAXBURST_TX * pins;
- 				if (sai->is_dsd)
- 					sai->dma_params_tx.fifo_num = pins +
--					   (sai->dataline_off_dsd[tx] << 8);
-+					   (sai->dataline_off_dsd[tx] << 4);
- 				else
- 					sai->dma_params_tx.fifo_num = pins +
--						(sai->dataline_off[tx] << 8);
-+						(sai->dataline_off[tx] << 4);
- 			} else {
- 				sai->dma_params_rx.maxburst =
- 					FSL_SAI_MAXBURST_RX * pins;
- 				if (sai->is_dsd)
- 					sai->dma_params_rx.fifo_num = pins +
--					  (sai->dataline_off_dsd[tx] << 8);
-+					  (sai->dataline_off_dsd[tx] << 4);
- 				else
- 					sai->dma_params_rx.fifo_num = pins +
--						(sai->dataline_off[tx] << 8);
-+						(sai->dataline_off[tx] << 4);
- 			}
- 		}
- 
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0058-MLK-20189-8-ASoC-fsl_sai-use-signed-offset-variable.patch b/target/linux/layerscape/patches-5.4/801-audio-0058-MLK-20189-8-ASoC-fsl_sai-use-signed-offset-variable.patch
deleted file mode 100644
index 97f4cb0350..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0058-MLK-20189-8-ASoC-fsl_sai-use-signed-offset-variable.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From d8802def525b4f74f66fca02afe9c17a729a3201 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Tue, 13 Nov 2018 11:36:29 +0200
-Subject: [PATCH] MLK-20189-8: ASoC: fsl_sai: use signed offset variable
-
-Both dataline_off and dataline_off_dsd fields are unsigned,
-thus checking negative values make no sense. Use a signed
-variable to calculate offset instead.
-
-This fixes Coverity issue: CID1899299
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 14 +++++---------
- 1 file changed, 5 insertions(+), 9 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -1273,7 +1273,7 @@ static int fsl_sai_probe(struct platform
- 	char tmp[8];
- 	int irq, ret, i;
- 	int index;
--	int firstbitidx, nextbitidx;
-+	int firstbitidx, nextbitidx, offset;
- 	struct regmap_config fsl_sai_regmap_config = fsl_sai_v2_regmap_config;
- 	unsigned long irqflags = 0;
- 
-@@ -1356,10 +1356,8 @@ static int fsl_sai_probe(struct platform
- 	for (i = 0; i < 2; i++) {
- 		firstbitidx = find_first_bit((const unsigned long *)&sai->dataline[i], 8);
- 		nextbitidx = find_next_bit((const unsigned long *)&sai->dataline[i], 8, firstbitidx+1);
--		sai->dataline_off[i] = nextbitidx - firstbitidx - 1;
--
--		if (sai->dataline_off[i] < 0 || sai->dataline_off[i] >= 7)
--			sai->dataline_off[i] = 0;
-+		offset = nextbitidx - firstbitidx - 1;
-+		sai->dataline_off[i] = (offset < 0 || offset >= 7 ? 0 : offset);
- 	}
- 
- 	ret = of_property_read_u32_index(np, "fsl,dataline,dsd", 0, &sai->dataline_dsd[0]);
-@@ -1378,10 +1376,8 @@ static int fsl_sai_probe(struct platform
- 	for (i = 0; i < 2; i++) {
- 		firstbitidx = find_first_bit((const unsigned long *)&sai->dataline_dsd[i], 8);
- 		nextbitidx = find_next_bit((const unsigned long *)&sai->dataline_dsd[i], 8, firstbitidx+1);
--		sai->dataline_off_dsd[i] = nextbitidx - firstbitidx - 1;
--
--		if (sai->dataline_off_dsd[i] < 0 || sai->dataline_off_dsd[i] >= 7)
--			sai->dataline_off_dsd[i] = 0;
-+		offset = nextbitidx - firstbitidx - 1;
-+		sai->dataline_off_dsd[i] = (offset < 0 || offset >= 7 ? 0 : offset);
- 	}
- 
- 	if ((of_find_property(np, "fsl,i2s-xtor", NULL) != NULL) ||
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0059-MLK-20328-1-ASoC-fsl_sai-map-number-of-pins-to-datal.patch b/target/linux/layerscape/patches-5.4/801-audio-0059-MLK-20328-1-ASoC-fsl_sai-map-number-of-pins-to-datal.patch
deleted file mode 100644
index 4f1bcea90c..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0059-MLK-20328-1-ASoC-fsl_sai-map-number-of-pins-to-datal.patch
+++ /dev/null
@@ -1,373 +0,0 @@
-From e62741891f6901b5219eacdf60835cac9beb7bae Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Wed, 21 Nov 2018 16:09:44 +0200
-Subject: [PATCH] MLK-20328-1: ASoC: fsl_sai: map number of pins to dataline
- masks
-
-The patch enable mapping the number of pins required to play or record
-a specific number of channels to a specific dataline mask.
-
-Three consequent elements in "fsl,dataline" and "fsl,dataline,dsd" defines a
-particular mapping, for instance for: fsl,dataline = "0 0xff 0xff 2 0x11 0x11"
-there are two mappings defined:
-
-default (0 pins) "rx" and "tx" dataline masks: 0 0xff 0xff
-         2 pins  "rx" and "tx" dataline masks: 2 0x11 0x11
-
-In case if property is missing, then default value "0 0x1 0x1" is considered.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 227 ++++++++++++++++++++++++++++++------------------
- sound/soc/fsl/fsl_sai.h |  16 +++-
- 2 files changed, 153 insertions(+), 90 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -621,17 +621,35 @@ static int fsl_sai_hw_params(struct snd_
- 	u32 slots = (channels == 1) ? 2 : channels;
- 	u32 slot_width = word_width;
- 	u32 pins, bclk;
--	int ret;
--	int i;
--	int trce_mask = 0;
-+	int ret, i, trce_mask = 0, dl_cfg_cnt, dl_cfg_idx = 0;
-+	struct fsl_sai_dl_cfg *dl_cfg;
- 
- 	if (sai->slots)
- 		slots = sai->slots;
- 
- 	pins = DIV_ROUND_UP(channels, slots);
- 	sai->is_dsd = fsl_is_dsd(params);
--	if (sai->is_dsd)
-+	if (sai->is_dsd) {
- 		pins = channels;
-+		dl_cfg = sai->dsd_dl_cfg;
-+		dl_cfg_cnt = sai->dsd_dl_cfg_cnt;
-+	} else {
-+		dl_cfg = sai->pcm_dl_cfg;
-+		dl_cfg_cnt = sai->pcm_dl_cfg_cnt;
-+	}
-+
-+	for (i = 0; i < dl_cfg_cnt; i++) {
-+		if (dl_cfg[i].pins == pins) {
-+			dl_cfg_idx = i;
-+			break;
-+		}
-+	}
-+
-+	if (dl_cfg_idx >= dl_cfg_cnt) {
-+		dev_err(cpu_dai->dev, "fsl,dataline%s invalid or not provided.\n",
-+			sai->is_dsd ? ",dsd" : "");
-+		return -EINVAL;
-+	}
- 
- 	if (sai->slot_width)
- 		slot_width = sai->slot_width;
-@@ -713,7 +731,7 @@ static int fsl_sai_hw_params(struct snd_
- 
- 	if (sai->soc->dataline != 0x1) {
- 
--		if (sai->dataline[tx] <= 1 || sai->is_multi_lane)
-+		if (dl_cfg[dl_cfg_idx].mask[tx] <= 1 || sai->is_multi_lane)
- 			regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, offset),
- 				FSL_SAI_CR4_FCOMB_MASK, 0);
- 		else
-@@ -724,21 +742,13 @@ static int fsl_sai_hw_params(struct snd_
- 			if (tx) {
- 				sai->dma_params_tx.maxburst =
- 						FSL_SAI_MAXBURST_TX * pins;
--				if (sai->is_dsd)
--					sai->dma_params_tx.fifo_num = pins +
--					   (sai->dataline_off_dsd[tx] << 4);
--				else
--					sai->dma_params_tx.fifo_num = pins +
--						(sai->dataline_off[tx] << 4);
-+				sai->dma_params_tx.fifo_num = pins +
-+					   (dl_cfg[dl_cfg_idx].offset[tx] << 4);
- 			} else {
- 				sai->dma_params_rx.maxburst =
- 					FSL_SAI_MAXBURST_RX * pins;
--				if (sai->is_dsd)
--					sai->dma_params_rx.fifo_num = pins +
--					  (sai->dataline_off_dsd[tx] << 4);
--				else
--					sai->dma_params_rx.fifo_num = pins +
--						(sai->dataline_off[tx] << 4);
-+				sai->dma_params_rx.fifo_num = pins +
-+					  (dl_cfg[dl_cfg_idx].offset[tx] << 4);
- 			}
- 		}
- 
-@@ -746,38 +756,22 @@ static int fsl_sai_hw_params(struct snd_
- 				&sai->dma_params_rx);
- 	}
- 
--	if (sai->is_dsd) {
--		if (__sw_hweight8(sai->dataline_dsd[tx] & 0xFF) < pins) {
--			dev_err(cpu_dai->dev, "channel not supported\n");
--			return -EINVAL;
--		}
--		/*find a proper tcre setting*/
--		for (i = 0; i < 8; i++) {
--			trce_mask = (1 << (i + 1)) - 1;
--			if (__sw_hweight8(sai->dataline_dsd[tx] & trce_mask) == pins)
--				break;
--		}
--
--		regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
--			   FSL_SAI_CR3_TRCE_MASK,
--			   FSL_SAI_CR3_TRCE((sai->dataline_dsd[tx] & trce_mask)));
--	} else {
--		if (__sw_hweight8(sai->dataline[tx] & 0xFF) < pins) {
--			dev_err(cpu_dai->dev, "channel not supported\n");
--			return -EINVAL;
--		}
--		/*find a proper tcre setting*/
--		for (i = 0; i < 8; i++) {
--			trce_mask = (1 << (i + 1)) - 1;
--			if (__sw_hweight8(sai->dataline[tx] & trce_mask) == pins)
--				break;
--		}
-+	if (__sw_hweight8(dl_cfg[dl_cfg_idx].mask[tx] & 0xFF) < pins) {
-+		dev_err(cpu_dai->dev, "channel not supported\n");
-+		return -EINVAL;
-+	}
- 
--		regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
--			   FSL_SAI_CR3_TRCE_MASK,
--			   FSL_SAI_CR3_TRCE((sai->dataline[tx] & trce_mask)));
-+	/*find a proper tcre setting*/
-+	for (i = 0; i < 8; i++) {
-+		trce_mask = (1 << (i + 1)) - 1;
-+		if (__sw_hweight8(dl_cfg[dl_cfg_idx].mask[tx] & trce_mask) == pins)
-+			break;
- 	}
- 
-+	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
-+		   FSL_SAI_CR3_TRCE_MASK,
-+		   FSL_SAI_CR3_TRCE((dl_cfg[dl_cfg_idx].mask[tx] & trce_mask)));
-+
- 	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, offset),
- 			   FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK |
- 			   FSL_SAI_CR4_CHMOD_MASK,
-@@ -820,15 +814,32 @@ static int fsl_sai_trigger(struct snd_pc
- 	u32 slots = (channels == 1) ? 2 : channels;
- 	u32 xcsr, count = 100;
- 	u32 pins;
--	int i = 0, j = 0, k = 0;
-+	int i = 0, j = 0, k = 0, dl_cfg_cnt, dl_cfg_idx = 0;
-+	struct fsl_sai_dl_cfg *dl_cfg;
- 
- 	if (sai->slots)
- 		slots = sai->slots;
- 
- 	pins = DIV_ROUND_UP(channels, slots);
- 
--	if (sai->is_dsd)
-+	if (sai->is_dsd) {
- 		pins = channels;
-+		dl_cfg = sai->dsd_dl_cfg;
-+		dl_cfg_cnt = sai->dsd_dl_cfg_cnt;
-+	} else {
-+		dl_cfg = sai->pcm_dl_cfg;
-+		dl_cfg_cnt = sai->pcm_dl_cfg_cnt;
-+	}
-+
-+	for (i = 0; i < dl_cfg_cnt; i++) {
-+		if (dl_cfg[i].pins == pins) {
-+			dl_cfg_idx = i;
-+			break;
-+		}
-+	}
-+
-+	i = 0;
-+
- 	/*
- 	 * Asynchronous mode: Clear SYNC for both Tx and Rx.
- 	 * Rx sync with Tx clocks: Clear SYNC for Tx, set it for Rx.
-@@ -849,7 +860,7 @@ static int fsl_sai_trigger(struct snd_pc
- 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- 
- 		while (tx && i < channels) {
--			if ((sai->is_dsd ? sai->dataline_dsd[tx] : sai->dataline[tx]) & (1 << j)) {
-+			if (dl_cfg[dl_cfg_idx].mask[tx] & (1 << j)) {
- 				regmap_write(sai->regmap, FSL_SAI_TDR0 + j * 0x4, 0x0);
- 				i++;
- 				k++;
-@@ -1262,6 +1273,77 @@ static const struct of_device_id fsl_sai
- };
- MODULE_DEVICE_TABLE(of, fsl_sai_ids);
- 
-+static unsigned int fsl_sai_calc_dl_off(unsigned int* dl_mask)
-+{
-+	int fbidx, nbidx, offset;
-+
-+	fbidx = find_first_bit((const unsigned long *)dl_mask, 8);
-+	nbidx = find_next_bit((const unsigned long *)dl_mask, 8, fbidx+1);
-+	offset = nbidx - fbidx - 1;
-+
-+	return (offset < 0 || offset >= 7 ? 0 : offset);
-+}
-+
-+static int fsl_sai_read_dlcfg(struct platform_device *pdev, char *pn,
-+	struct fsl_sai_dl_cfg **rcfg, unsigned int soc_dl)
-+{
-+	int ret, elems, i, index, num_cfg;
-+	struct device_node *np = pdev->dev.of_node;
-+	struct fsl_sai_dl_cfg *cfg;
-+	u32 rx, tx, pins;
-+
-+	*rcfg = NULL;
-+
-+	elems = of_property_count_u32_elems(np, pn);
-+
-+	/* consider default value "0 0x1 0x1" if property is missing */
-+	if (elems <= 0)
-+		elems = 3;
-+
-+	if (elems % 3) {
-+		dev_err(&pdev->dev,
-+			"Number of elements in %s must be divisible to 3.\n", pn);
-+		return -EINVAL;
-+	}
-+
-+	num_cfg = elems / 3;
-+	cfg = devm_kzalloc(&pdev->dev, num_cfg * sizeof(*cfg), GFP_KERNEL);
-+	if (cfg == NULL) {
-+		dev_err(&pdev->dev, "Cannot allocate memory for %s.\n", pn);
-+		return -ENOMEM;
-+	}
-+
-+	for (i = 0, index = 0; i < num_cfg; i++) {
-+		ret = of_property_read_u32_index(np, pn, index++, &pins);
-+		if (ret)
-+			pins = 0;
-+
-+		ret = of_property_read_u32_index(np, pn, index++, &rx);
-+		if (ret)
-+			rx = 1;
-+
-+		ret = of_property_read_u32_index(np, pn, index++, &tx);
-+		if (ret)
-+			tx = 1;
-+
-+		if ((rx & ~soc_dl) || (tx & ~soc_dl)) {
-+			dev_err(&pdev->dev,
-+				"%s: dataline cfg[%d] setting error, mask is 0x%x\n",
-+				 pn, i, soc_dl);
-+			return -EINVAL;
-+		}
-+
-+		cfg[i].pins = pins;
-+		cfg[i].mask[0] = rx;
-+		cfg[i].offset[0] = fsl_sai_calc_dl_off(&rx);
-+		cfg[i].mask[1] = tx;
-+		cfg[i].offset[1] = fsl_sai_calc_dl_off(&tx);
-+	}
-+
-+	*rcfg = cfg;
-+	return num_cfg;
-+}
-+
- static int fsl_sai_probe(struct platform_device *pdev)
- {
- 	struct device_node *np = pdev->dev.of_node;
-@@ -1273,7 +1355,6 @@ static int fsl_sai_probe(struct platform
- 	char tmp[8];
- 	int irq, ret, i;
- 	int index;
--	int firstbitidx, nextbitidx, offset;
- 	struct regmap_config fsl_sai_regmap_config = fsl_sai_v2_regmap_config;
- 	unsigned long irqflags = 0;
- 
-@@ -1340,45 +1421,19 @@ static int fsl_sai_probe(struct platform
- 		sai->is_multi_lane = true;
- 
- 	/*dataline mask for rx and tx*/
--	ret = of_property_read_u32_index(np, "fsl,dataline", 0, &sai->dataline[0]);
--	if (ret)
--		sai->dataline[0] = 1;
--
--	ret = of_property_read_u32_index(np, "fsl,dataline", 1, &sai->dataline[1]);
--	if (ret)
--		sai->dataline[1] = 1;
--
--	if ((sai->dataline[0] & (~sai->soc->dataline)) || sai->dataline[1] & (~sai->soc->dataline)) {
--		dev_err(&pdev->dev, "dataline setting error, Mask is 0x%x\n", sai->soc->dataline);
--		return -EINVAL;
--	}
--
--	for (i = 0; i < 2; i++) {
--		firstbitidx = find_first_bit((const unsigned long *)&sai->dataline[i], 8);
--		nextbitidx = find_next_bit((const unsigned long *)&sai->dataline[i], 8, firstbitidx+1);
--		offset = nextbitidx - firstbitidx - 1;
--		sai->dataline_off[i] = (offset < 0 || offset >= 7 ? 0 : offset);
--	}
--
--	ret = of_property_read_u32_index(np, "fsl,dataline,dsd", 0, &sai->dataline_dsd[0]);
--	if (ret)
--		sai->dataline_dsd[0] = 1;
--
--	ret = of_property_read_u32_index(np, "fsl,dataline,dsd", 1, &sai->dataline_dsd[1]);
--	if (ret)
--		sai->dataline_dsd[1] = 1;
-+	ret = fsl_sai_read_dlcfg(pdev, "fsl,dataline", &sai->pcm_dl_cfg,
-+					sai->soc->dataline);
-+	if (ret < 0)
-+		return ret;
-+
-+	sai->pcm_dl_cfg_cnt = ret;
-+
-+	ret = fsl_sai_read_dlcfg(pdev, "fsl,dataline,dsd", &sai->dsd_dl_cfg,
-+					sai->soc->dataline);
-+	if (ret < 0)
-+		return ret;
- 
--	if ((sai->dataline_dsd[0] & (~sai->soc->dataline)) || sai->dataline_dsd[1] & (~sai->soc->dataline)) {
--		dev_err(&pdev->dev, "dataline setting error, Mask is 0x%x\n", sai->soc->dataline);
--		return -EINVAL;
--	}
--
--	for (i = 0; i < 2; i++) {
--		firstbitidx = find_first_bit((const unsigned long *)&sai->dataline_dsd[i], 8);
--		nextbitidx = find_next_bit((const unsigned long *)&sai->dataline_dsd[i], 8, firstbitidx+1);
--		offset = nextbitidx - firstbitidx - 1;
--		sai->dataline_off_dsd[i] = (offset < 0 || offset >= 7 ? 0 : offset);
--	}
-+	sai->dsd_dl_cfg_cnt = ret;
- 
- 	if ((of_find_property(np, "fsl,i2s-xtor", NULL) != NULL) ||
- 	    (of_find_property(np, "fsl,txm-rxs", NULL) != NULL))
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -234,6 +234,12 @@ struct fsl_sai_param {
- 	u32 dln; /* number of datalines implemented */
- };
- 
-+struct fsl_sai_dl_cfg {
-+	unsigned int pins;
-+	unsigned int mask[2];
-+	unsigned int offset[2];
-+};
-+
- struct fsl_sai {
- 	struct platform_device *pdev;
- 	struct regmap *regmap;
-@@ -249,10 +255,12 @@ struct fsl_sai {
- 	bool synchronous[2];
- 	bool is_stream_opened[2];
- 	bool is_dsd;
--	unsigned int dataline[2];
--	unsigned int dataline_dsd[2];
--	unsigned int dataline_off[2];
--	unsigned int dataline_off_dsd[2];
-+
-+	int pcm_dl_cfg_cnt;
-+	int dsd_dl_cfg_cnt;
-+	struct fsl_sai_dl_cfg *pcm_dl_cfg;
-+	struct fsl_sai_dl_cfg *dsd_dl_cfg;
-+
- 	unsigned int masterflag[2];
- 
- 	unsigned int mclk_id[2];
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0060-ASoC-fsl_sai-Support-EPROBE_DEFER.patch b/target/linux/layerscape/patches-5.4/801-audio-0060-ASoC-fsl_sai-Support-EPROBE_DEFER.patch
deleted file mode 100644
index 56d259af69..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0060-ASoC-fsl_sai-Support-EPROBE_DEFER.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 906ed2027fe62acf79be975c06fc297e77331191 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@nxp.com>
-Date: Tue, 29 Jan 2019 14:41:39 +0800
-Subject: [PATCH] ASoC: fsl_sai: Support -EPROBE_DEFER
-
-Support -EPROBE_DEFER for the resource is not ready in time
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -1383,7 +1383,7 @@ static int fsl_sai_probe(struct platform
- 			"bus", base, &fsl_sai_regmap_config);
- 
- 	/* Compatible with old DTB cases */
--	if (IS_ERR(sai->regmap))
-+	if (IS_ERR(sai->regmap) && PTR_ERR(sai->regmap) != -EPROBE_DEFER)
- 		sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
- 				"sai", base, &fsl_sai_regmap_config);
- 	if (IS_ERR(sai->regmap)) {
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0061-ASoC-fsl_sai-support-multi-power-domain.patch b/target/linux/layerscape/patches-5.4/801-audio-0061-ASoC-fsl_sai-support-multi-power-domain.patch
deleted file mode 100644
index 63c77db19d..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0061-ASoC-fsl_sai-support-multi-power-domain.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From f11933205182a3da44e7f99d899dd27adafcb6d5 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@nxp.com>
-Date: Tue, 29 Jan 2019 14:51:24 +0800
-Subject: [PATCH] ASoC: fsl_sai: support multi power domain
-
-support multi power domain
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 20 ++++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -16,6 +16,7 @@
- #include <linux/slab.h>
- #include <linux/time.h>
- #include <linux/pm_qos.h>
-+#include <linux/pm_domain.h>
- #include <sound/core.h>
- #include <sound/dmaengine_pcm.h>
- #include <sound/pcm_params.h>
-@@ -1357,6 +1358,7 @@ static int fsl_sai_probe(struct platform
- 	int index;
- 	struct regmap_config fsl_sai_regmap_config = fsl_sai_v2_regmap_config;
- 	unsigned long irqflags = 0;
-+	int num_domains = 0;
- 
- 	sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL);
- 	if (!sai)
-@@ -1409,6 +1411,24 @@ static int fsl_sai_probe(struct platform
- 		}
- 	}
- 
-+	num_domains = of_count_phandle_with_args(np, "power-domains",
-+						 "#power-domain-cells");
-+	for (i = 0; i < num_domains; i++) {
-+		struct device *pd_dev;
-+		struct device_link *link;
-+
-+		pd_dev = dev_pm_domain_attach_by_id(&pdev->dev, i);
-+		if (IS_ERR(pd_dev))
-+			return PTR_ERR(pd_dev);
-+
-+		link = device_link_add(&pdev->dev, pd_dev,
-+			DL_FLAG_STATELESS |
-+			DL_FLAG_PM_RUNTIME |
-+			DL_FLAG_RPM_ACTIVE);
-+		if (IS_ERR(link))
-+			return PTR_ERR(link);
-+	}
-+
- 	sai->pll8k_clk = devm_clk_get(&pdev->dev, "pll8k");
- 	if (IS_ERR(sai->pll8k_clk))
- 		sai->pll8k_clk = NULL;
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0062-ASoC-fsl-sai-fix-build-failture-due-to-5.1-RC7-upgra.patch b/target/linux/layerscape/patches-5.4/801-audio-0062-ASoC-fsl-sai-fix-build-failture-due-to-5.1-RC7-upgra.patch
deleted file mode 100644
index 061b8e0342..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0062-ASoC-fsl-sai-fix-build-failture-due-to-5.1-RC7-upgra.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 0e4fe4adfd9a9cd36220b79a8eecce4d24a9fd02 Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Tue, 7 May 2019 11:01:08 +0800
-Subject: [PATCH] ASoC: fsl: sai: fix build failture due to 5.1 RC7 upgrade
-
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 10 ----------
- 1 file changed, 10 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -418,14 +418,12 @@ static int fsl_sai_set_dai_fmt_tr(struct
- 	case SND_SOC_DAIFMT_CBS_CFS:
- 		val_cr2 |= FSL_SAI_CR2_BCD_MSTR;
- 		val_cr4 |= FSL_SAI_CR4_FSD_MSTR;
--		sai->is_slave_mode = false;
- 		break;
- 	case SND_SOC_DAIFMT_CBM_CFM:
- 		sai->slave_mode[tx] = true;
- 		break;
- 	case SND_SOC_DAIFMT_CBS_CFM:
- 		val_cr2 |= FSL_SAI_CR2_BCD_MSTR;
--		sai->is_slave_mode = false;
- 		break;
- 	case SND_SOC_DAIFMT_CBM_CFS:
- 		val_cr4 |= FSL_SAI_CR4_FSD_MSTR;
-@@ -1575,14 +1573,6 @@ static int fsl_sai_remove(struct platfor
- 	return 0;
- }
- 
--static const struct of_device_id fsl_sai_ids[] = {
--	{ .compatible = "fsl,vf610-sai", },
--	{ .compatible = "fsl,imx6sx-sai", },
--	{ .compatible = "fsl,imx6ul-sai", },
--	{ /* sentinel */ }
--};
--MODULE_DEVICE_TABLE(of, fsl_sai_ids);
--
- #ifdef CONFIG_PM
- static int fsl_sai_runtime_suspend(struct device *dev)
- {
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0063-MLK-21876-4-ASoC-fsl-sai-fix-build-for-next-20190524.patch b/target/linux/layerscape/patches-5.4/801-audio-0063-MLK-21876-4-ASoC-fsl-sai-fix-build-for-next-20190524.patch
deleted file mode 100644
index 8ceb8bfa3b..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0063-MLK-21876-4-ASoC-fsl-sai-fix-build-for-next-20190524.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 23212c6c5fcee8c1a317b5beb73c89374751de7b Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Mon, 27 May 2019 17:00:54 +0800
-Subject: [PATCH] MLK-21876-4 ASoC: fsl: sai: fix build for next-20190524
- upgrade
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-In file included from ../sound/soc/fsl/fsl_sai.c:15:0:
-../sound/soc/fsl/fsl_sai.c: In function ‘fsl_sai_startup’:
-../sound/soc/fsl/fsl_sai.c:957:51: error: ‘offset’ undeclared (first use in this function)
-  regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
-                                                   ^
-../include/linux/regmap.h:77:31: note: in definition of macro ‘regmap_update_bits’
-  regmap_update_bits_base(map, reg, mask, val, NULL, false, false)
-                               ^
-../sound/soc/fsl/fsl_sai.h:84:37: note: in expansion of macro ‘FSL_SAI_TCR3’
- #define FSL_SAI_xCR3(tx, off) (tx ? FSL_SAI_TCR3(off) : FSL_SAI_RCR3(off))
-                                     ^
-../sound/soc/fsl/fsl_sai.c:957:34: note: in expansion of macro ‘FSL_SAI_xCR3’
-  regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
-                                  ^
-../sound/soc/fsl/fsl_sai.c:957:51: note: each undeclared identifier is reported only once for each function it appears in
-  regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
-                                                   ^
-../include/linux/regmap.h:77:31: note: in definition of macro ‘regmap_update_bits’
-  regmap_update_bits_base(map, reg, mask, val, NULL, false, false)
-                               ^
-../sound/soc/fsl/fsl_sai.h:84:37: note: in expansion of macro ‘FSL_SAI_TCR3’
- #define FSL_SAI_xCR3(tx, off) (tx ? FSL_SAI_TCR3(off) : FSL_SAI_RCR3(off))
-                                     ^
-../sound/soc/fsl/fsl_sai.c:957:34: note: in expansion of macro ‘FSL_SAI_xCR3’
-  regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
-
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 11 +----------
- 1 file changed, 1 insertion(+), 10 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -954,10 +954,6 @@ static int fsl_sai_startup(struct snd_pc
- 	else
- 		sai->is_stream_opened[tx] = true;
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
--			   FSL_SAI_CR3_TRCE_MASK,
--			   FSL_SAI_CR3_TRCE(sai->dataline[tx]));
--
- 	/* EDMA engine needs periods of size multiple of tx/rx maxburst */
- 	if (sai->soc->constrain_period_size)
- 		snd_pcm_hw_constraint_step(substream->runtime, 0,
-@@ -977,13 +973,8 @@ static void fsl_sai_shutdown(struct snd_
- 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
- 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- 
--	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, 0);
--
--	if (sai->is_stream_opened[tx]) {
--		regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, offset),
--				   FSL_SAI_CR3_TRCE_MASK, 0);
-+	if (sai->is_stream_opened[tx])
- 		sai->is_stream_opened[tx] = false;
--	}
- }
- 
- static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0064-ASoC-fsl_sai-Mark-cache-dirty-at-resume.patch b/target/linux/layerscape/patches-5.4/801-audio-0064-ASoC-fsl_sai-Mark-cache-dirty-at-resume.patch
deleted file mode 100644
index 9dcab4e3bc..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0064-ASoC-fsl_sai-Mark-cache-dirty-at-resume.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From e89355ed8ddefc68e33a754fe8be067cee54ce62 Mon Sep 17 00:00:00 2001
-From: Daniel Baluta <daniel.baluta@nxp.com>
-Date: Wed, 19 Jun 2019 19:50:31 +0300
-Subject: [PATCH] ASoC: fsl_sai: Mark cache dirty at resume
-
-This is needed so that at resume will restore the
-correct SAI registers.
-
-Looks like the call to regcache_mark_dirty was missed when
-porting commit 760bd6187413e37c8 ("MLK-15960-2: ASoC: fsl_sai: refine
-the pm runtime function")
-
-Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -1617,6 +1617,8 @@ static int fsl_sai_runtime_resume(struct
- 				PM_QOS_CPU_DMA_LATENCY, 0);
- 
- 	regcache_cache_only(sai->regmap, false);
-+	regcache_mark_dirty(sai->regmap);
-+
- 	regmap_write(sai->regmap, FSL_SAI_TCSR(offset), FSL_SAI_CSR_SR);
- 	regmap_write(sai->regmap, FSL_SAI_RCSR(offset), FSL_SAI_CSR_SR);
- 	usleep_range(1000, 2000);
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0065-LF-106-ASoC-fsl_sai-request-BUS_FREQ_AUDIO.patch b/target/linux/layerscape/patches-5.4/801-audio-0065-LF-106-ASoC-fsl_sai-request-BUS_FREQ_AUDIO.patch
deleted file mode 100644
index 76b7b607ed..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0065-LF-106-ASoC-fsl_sai-request-BUS_FREQ_AUDIO.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 702f662e21b9246348987a119e2a3ca16a31acb7 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@nxp.com>
-Date: Fri, 22 Nov 2019 15:36:31 +0800
-Subject: [PATCH] LF-106: ASoC: fsl_sai: request BUS_FREQ_AUDIO
-
-request BUS_FREQ_AUDIO
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -23,6 +23,7 @@
- #include <linux/mfd/syscon.h>
- #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
- #include <linux/pm_runtime.h>
-+#include <linux/busfreq-imx.h>
- 
- #include "fsl_dsd.h"
- #include "fsl_sai.h"
-@@ -1571,6 +1572,8 @@ static int fsl_sai_runtime_suspend(struc
- 
- 	regcache_cache_only(sai->regmap, true);
- 
-+	release_bus_freq(BUS_FREQ_AUDIO);
-+
- 	if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE))
- 		clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[0]]);
- 
-@@ -1612,6 +1615,8 @@ static int fsl_sai_runtime_resume(struct
- 			goto disable_tx_clk;
- 	}
- 
-+	request_bus_freq(BUS_FREQ_AUDIO);
-+
- 	if (sai->soc->flags & SAI_FLAG_PMQOS)
- 		pm_qos_add_request(&sai->pm_qos_req,
- 				PM_QOS_CPU_DMA_LATENCY, 0);
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0066-MLK-16224-2-ASoC-dmaengine_pcm-add-fifo_num-to-snd_d.patch b/target/linux/layerscape/patches-5.4/801-audio-0066-MLK-16224-2-ASoC-dmaengine_pcm-add-fifo_num-to-snd_d.patch
deleted file mode 100644
index 6f4997f4e8..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0066-MLK-16224-2-ASoC-dmaengine_pcm-add-fifo_num-to-snd_d.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From fd343b5141e1128ab893f5370d2a05e4f09830b1 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@nxp.com>
-Date: Tue, 23 Jan 2018 13:27:10 +0800
-Subject: [PATCH] MLK-16224-2: ASoC: dmaengine_pcm: add fifo_num to
- snd_dmaengine_dai_dma_data
-
-In order to support multi-fifo sdma script, the audio driver need to send
-the fifo number to dma driver through dma_slave_config, and the cpu_dai
-driver should config fifo_num for the audio platform driver, then platform
-driver can config fifo_num to dma.
-So add new variable fifo_num for struct snd_dmaengine_dai_dma_data.
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
-Reviewed-by: Robin Gong<yibin.gong@nxp.com>
----
- include/sound/dmaengine_pcm.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/include/sound/dmaengine_pcm.h
-+++ b/include/sound/dmaengine_pcm.h
-@@ -76,6 +76,7 @@ struct snd_dmaengine_dai_dma_data {
- 	const char *chan_name;
- 	unsigned int fifo_size;
- 	unsigned int flags;
-+	unsigned int fifo_num;
- };
- 
- void snd_dmaengine_pcm_set_config_from_dai_data(
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0069-MLK-21484-4-ASoC-fsl_sai-ensure-clk-not-in-use-prior.patch b/target/linux/layerscape/patches-5.4/801-audio-0069-MLK-21484-4-ASoC-fsl_sai-ensure-clk-not-in-use-prior.patch
deleted file mode 100644
index 87ecb07625..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0069-MLK-21484-4-ASoC-fsl_sai-ensure-clk-not-in-use-prior.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 5c4835e943dd31265770e7ca3c03307d5c725db6 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Thu, 25 Apr 2019 15:03:56 +0300
-Subject: [PATCH] MLK-21484-4: ASoC: fsl_sai: ensure clk not in use prior
- set_mclk_rate
-
-On recent kernels clks which are marked with CLK_SET_RATE_GATE are
-"protected" against further changes at clk_prepare time, including clk
-set_parent and set_rate. See commit 9461f7b33d11 ("clk: fix
-CLK_SET_RATE_GATE with clock rate protection"). The current fsl_sai
-implementation ensures the clock is not in use prior set_parent,
-extend this for set_rate also by moving if (sai->mclk_streams == 0)
-outside fsl_sai_set_mclk_rate(). Aside of this avoid changing rate and
-parent for BUS clk.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 30 +++++++++++++-----------------
- 1 file changed, 13 insertions(+), 17 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -259,25 +259,19 @@ static int fsl_sai_set_mclk_rate(struct
- 	if (pll) {
- 		npll = (do_div(ratio, 8000) ? sai->pll11k_clk : sai->pll8k_clk);
- 		if (!clk_is_match(pll, npll)) {
--			if (sai->mclk_streams == 0) {
--				ret = clk_set_parent(p, npll);
--				if (ret < 0)
--					dev_warn(dai->dev,
--						"failed to set parent %s: %d\n",
--						__clk_get_name(npll), ret);
--			} else {
--				dev_err(dai->dev,
--					"PLL %s is in use by a running stream.\n",
--					__clk_get_name(pll));
--				return -EINVAL;
--			}
-+			ret = clk_set_parent(p, npll);
-+			if (ret < 0)
-+				dev_warn(dai->dev,
-+					 "failed to set parent %s: %d\n",
-+					 __clk_get_name(npll), ret);
- 		}
- 	}
- 
- 	ret = clk_set_rate(sai->mclk_clk[clk_id], freq);
- 	if (ret < 0)
- 		dev_err(dai->dev, "failed to set clock rate (%u): %d\n",
--				freq, ret);
-+			freq, ret);
-+
- 	return ret;
- }
- 
-@@ -298,7 +292,7 @@ static int fsl_sai_set_dai_sysclk(struct
- 	if (dir == SND_SOC_CLOCK_IN)
- 		return 0;
- 
--	if (freq > 0) {
-+	if (freq > 0 && clk_id != FSL_SAI_CLK_BUS) {
- 		if (clk_id < 0 || clk_id >= FSL_SAI_MCLK_MAX) {
- 			dev_err(cpu_dai->dev, "Unknown clock id: %d\n", clk_id);
- 			return -EINVAL;
-@@ -309,9 +303,11 @@ static int fsl_sai_set_dai_sysclk(struct
- 			return -EINVAL;
- 		}
- 
--		ret = fsl_sai_set_mclk_rate(cpu_dai, clk_id, freq);
--		if (ret < 0)
--			return ret;
-+		if (sai->mclk_streams == 0) {
-+			ret = fsl_sai_set_mclk_rate(cpu_dai, clk_id, freq);
-+			if (ret < 0)
-+				return ret;
-+		}
- 	}
- 
- 	ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq,
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0070-MLK-21957-1-ASoC-fsl_sai-remove-reset-code-from-dai_.patch b/target/linux/layerscape/patches-5.4/801-audio-0070-MLK-21957-1-ASoC-fsl_sai-remove-reset-code-from-dai_.patch
deleted file mode 100644
index e4c7fa00ba..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0070-MLK-21957-1-ASoC-fsl_sai-remove-reset-code-from-dai_.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 9bd468920e23649e1244c5d243215c04ff3e72e6 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Tue, 18 Jun 2019 16:16:19 +0300
-Subject: [PATCH] MLK-21957-1: ASoC: fsl_sai: remove reset code from dai_probe
-
-SAI software reset is done in runtime resume,
-there is no need to do it in fsl_sai_dai_probe.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -991,13 +991,6 @@ static int fsl_sai_dai_probe(struct snd_
- 	struct fsl_sai *sai = dev_get_drvdata(cpu_dai->dev);
- 	unsigned char offset = sai->soc->reg_offset;
- 
--	/* Software Reset for both Tx and Rx */
--	regmap_write(sai->regmap, FSL_SAI_TCSR(offset), FSL_SAI_CSR_SR);
--	regmap_write(sai->regmap, FSL_SAI_RCSR(offset), FSL_SAI_CSR_SR);
--	/* Clear SR bit to finish the reset */
--	regmap_write(sai->regmap, FSL_SAI_TCSR(offset), 0);
--	regmap_write(sai->regmap, FSL_SAI_RCSR(offset), 0);
--
- 	regmap_update_bits(sai->regmap, FSL_SAI_TCR1(offset),
- 				sai->soc->fifo_depth - 1,
- 				sai->soc->fifo_depth - FSL_SAI_MAXBURST_TX);
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0071-MLK-21957-2-ASoC-fsl_sai-read-SAI-version-and-params.patch b/target/linux/layerscape/patches-5.4/801-audio-0071-MLK-21957-2-ASoC-fsl_sai-read-SAI-version-and-params.patch
deleted file mode 100644
index c400f7a5f6..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0071-MLK-21957-2-ASoC-fsl_sai-read-SAI-version-and-params.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 34a1cd97a2ef6f68a12ff2f2fd813548e867f72f Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Thu, 20 Jun 2019 13:25:15 +0300
-Subject: [PATCH] MLK-21957-2: ASoC: fsl_sai: read SAI version and params in
- probe
-
-Read SAI IP version and parameters in probe function.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 30 ++++++++++++++++++++----------
- 1 file changed, 20 insertions(+), 10 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -465,11 +465,12 @@ static int fsl_sai_set_dai_fmt(struct sn
- 	return ret;
- }
- 
--static int fsl_sai_check_ver(struct snd_soc_dai *cpu_dai)
-+static int fsl_sai_check_ver(struct device *dev)
- {
--	struct fsl_sai *sai = dev_get_drvdata(cpu_dai->dev);
-+	struct fsl_sai *sai = dev_get_drvdata(dev);
- 	unsigned char offset = sai->soc->reg_offset;
- 	unsigned int val;
-+	int ret;
- 
- 	if (FSL_SAI_TCSR(offset) == FSL_SAI_VERID)
- 		return 0;
-@@ -477,16 +478,21 @@ static int fsl_sai_check_ver(struct snd_
- 	if (sai->verid.loaded)
- 		return 0;
- 
--	sai->verid.loaded = true;
--	regmap_read(sai->regmap, FSL_SAI_VERID, &val);
--	dev_dbg(cpu_dai->dev, "VERID: 0x%016X\n", val);
-+	ret = regmap_read(sai->regmap, FSL_SAI_VERID, &val);
-+	if (ret < 0)
-+		return ret;
-+
-+	dev_dbg(dev, "VERID: 0x%016X\n", val);
- 
- 	sai->verid.id = (val & FSL_SAI_VER_ID_MASK) >> FSL_SAI_VER_ID_SHIFT;
- 	sai->verid.extfifo_en = (val & FSL_SAI_VER_EFIFO_EN);
- 	sai->verid.timestamp_en = (val & FSL_SAI_VER_TSTMP_EN);
- 
--	regmap_read(sai->regmap, FSL_SAI_PARAM, &val);
--	dev_dbg(cpu_dai->dev, "PARAM: 0x%016X\n", val);
-+	ret = regmap_read(sai->regmap, FSL_SAI_PARAM, &val);
-+	if (ret < 0)
-+		return ret;
-+
-+	dev_dbg(dev, "PARAM: 0x%016X\n", val);
- 
- 	/* max slots per frame, power of 2 */
- 	sai->param.spf = 1 <<
-@@ -499,11 +505,13 @@ static int fsl_sai_check_ver(struct snd_
- 	/* number of datalines implemented */
- 	sai->param.dln = val & FSL_SAI_PAR_DLN_MASK;
- 
--	dev_dbg(cpu_dai->dev,
-+	dev_dbg(dev,
- 		"Version: 0x%08X, SPF: %u, WPF: %u, DLN: %u\n",
- 		sai->verid.id, sai->param.spf, sai->param.wpf, sai->param.dln
- 	);
- 
-+	sai->verid.loaded = true;
-+
- 	return 0;
- }
- 
-@@ -521,8 +529,6 @@ static int fsl_sai_set_bclk(struct snd_s
- 	if (sai->slave_mode[tx])
- 		return 0;
- 
--	fsl_sai_check_ver(dai);
--
- 	for (id = 0; id < FSL_SAI_MCLK_MAX; id++) {
- 		clk_rate = clk_get_rate(sai->mclk_clk[id]);
- 		if (!clk_rate)
-@@ -1520,6 +1526,10 @@ static int fsl_sai_probe(struct platform
- 
- 	platform_set_drvdata(pdev, sai);
- 
-+	ret = fsl_sai_check_ver(&pdev->dev);
-+	if (ret < 0)
-+		dev_warn(&pdev->dev, "Error reading SAI version: %d\n", ret);
-+
- 	pm_runtime_enable(&pdev->dev);
- 
- 	regcache_cache_only(sai->regmap, true);
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0072-MLK-22522-ASoC-fsl_sai-fix-stack-out-of-bounds-KASAN.patch b/target/linux/layerscape/patches-5.4/801-audio-0072-MLK-22522-ASoC-fsl_sai-fix-stack-out-of-bounds-KASAN.patch
deleted file mode 100644
index 2fc52b8052..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0072-MLK-22522-ASoC-fsl_sai-fix-stack-out-of-bounds-KASAN.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 5d4e9c8371a2343c66123078dbde15438450b9a4 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Thu, 29 Aug 2019 13:17:33 +0300
-Subject: [PATCH] MLK-22522: ASoC: fsl_sai: fix stack-out-of-bounds KASAN
- complain
-
-Fix the following KASAN reported issue:
-==================================================================
-[   11.580278] BUG: KASAN: stack-out-of-bounds in find_next_bit+0x3c/0xc0
-[   11.586815] Read of size 8 at addr ffffffc8c8d4f760 by task swapper/0/1
-[   11.593440]
-[   11.594943] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G W 4.19.35-05042-g. #157
-[   11.604259] Hardware name: Freescale i.MX8QM MEK (DT)
-[   11.609323] Call trace:
-[   11.611785]  dump_backtrace+0x0/0x230
-[   11.615458]  show_stack+0x14/0x20
-[   11.618787]  dump_stack+0xbc/0xf4
-[   11.622118]  print_address_description+0x60/0x270
-[   11.626830]  kasan_report+0x230/0x360
-[   11.630505]  __asan_load8+0x84/0xa8
-[   11.634005]  find_next_bit+0x3c/0xc0
-[   11.637595]  fsl_sai_calc_dl_off+0x1c/0x50
-[   11.641703]  fsl_sai_read_dlcfg+0x184/0x368
-[   11.645898]  fsl_sai_probe+0x3ec/0xb48
-[   11.649663]  platform_drv_probe+0x70/0xd8
-[   11.653683]  really_probe+0x24c/0x370
-[   11.657358]  driver_probe_device+0x70/0x138
-[   11.661554]  __driver_attach+0x124/0x128
-[   11.665489]  bus_for_each_dev+0xe8/0x158
-[   11.669425]  driver_attach+0x30/0x40
-[   11.673012]  bus_add_driver+0x290/0x308
-[   11.676861]  driver_register+0xbc/0x1d0
-[   11.680711]  __platform_driver_register+0x7c/0x88
-[   11.685431]  fsl_sai_driver_init+0x18/0x20
-[   11.689537]  do_one_initcall+0xe8/0x5a8
-[   11.693387]  kernel_init_freeable+0x6b0/0x760
-[   11.697759]  kernel_init+0x10/0x120
-[   11.701255]  ret_from_fork+0x10/0x18
-....
-==================================================================
-[   11.800186] Disabling lock debugging due to kernel taint
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
-Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -1259,12 +1259,12 @@ static const struct of_device_id fsl_sai
- };
- MODULE_DEVICE_TABLE(of, fsl_sai_ids);
- 
--static unsigned int fsl_sai_calc_dl_off(unsigned int* dl_mask)
-+static unsigned int fsl_sai_calc_dl_off(unsigned long dl_mask)
- {
- 	int fbidx, nbidx, offset;
- 
--	fbidx = find_first_bit((const unsigned long *)dl_mask, 8);
--	nbidx = find_next_bit((const unsigned long *)dl_mask, 8, fbidx+1);
-+	fbidx = find_first_bit(&dl_mask, 8);
-+	nbidx = find_next_bit(&dl_mask, 8, fbidx + 1);
- 	offset = nbidx - fbidx - 1;
- 
- 	return (offset < 0 || offset >= 7 ? 0 : offset);
-@@ -1321,9 +1321,9 @@ static int fsl_sai_read_dlcfg(struct pla
- 
- 		cfg[i].pins = pins;
- 		cfg[i].mask[0] = rx;
--		cfg[i].offset[0] = fsl_sai_calc_dl_off(&rx);
-+		cfg[i].offset[0] = fsl_sai_calc_dl_off(rx);
- 		cfg[i].mask[1] = tx;
--		cfg[i].offset[1] = fsl_sai_calc_dl_off(&tx);
-+		cfg[i].offset[1] = fsl_sai_calc_dl_off(tx);
- 	}
- 
- 	*rcfg = cfg;
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0073-MLK-21957-3-ASoC-fsl_sai-add-bitcount-and-timestamp-.patch b/target/linux/layerscape/patches-5.4/801-audio-0073-MLK-21957-3-ASoC-fsl_sai-add-bitcount-and-timestamp-.patch
deleted file mode 100644
index 92de8196ee..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0073-MLK-21957-3-ASoC-fsl_sai-add-bitcount-and-timestamp-.patch
+++ /dev/null
@@ -1,164 +0,0 @@
-From 599235bd9d22c8cad90b0a7621b46d70cca94d31 Mon Sep 17 00:00:00 2001
-From: Viorel Suman <viorel.suman@nxp.com>
-Date: Wed, 5 Jun 2019 13:46:32 +0000
-Subject: [PATCH] MLK-21957-3: ASoC: fsl_sai: add bitcount and timestamp
- controls
-
-Bitcount and timestamp support added in SAI IP recently.
-Add the related controls in SAI driver.
-
-Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++++-
- sound/soc/fsl/fsl_sai.h |  6 +++
- 2 files changed, 102 insertions(+), 1 deletion(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -992,6 +992,90 @@ static const struct snd_soc_dai_ops fsl_
- 	.shutdown	= fsl_sai_shutdown,
- };
- 
-+static const char
-+	*en_sl[] = { "Disabled", "Enabled", },
-+	*inc_sl[] = { "On enabled and bitcount increment", "On enabled", };
-+
-+static const struct soc_enum tstmp_enum[] = {
-+SOC_ENUM_SINGLE(FSL_SAI_TTCTL, 0, ARRAY_SIZE(en_sl), en_sl),
-+SOC_ENUM_SINGLE(FSL_SAI_RTCTL, 0, ARRAY_SIZE(en_sl), en_sl),
-+SOC_ENUM_SINGLE(FSL_SAI_TTCTL, 1, ARRAY_SIZE(inc_sl), inc_sl),
-+SOC_ENUM_SINGLE(FSL_SAI_RTCTL, 1, ARRAY_SIZE(inc_sl), inc_sl),
-+};
-+
-+int fsl_sai_get_reg(struct snd_kcontrol *kcontrol,
-+		    struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
-+	struct soc_mreg_control *mc =
-+		(struct soc_mreg_control *)kcontrol->private_value;
-+	bool pm_active = pm_runtime_active(component->dev);
-+	unsigned int regval;
-+	int ret;
-+
-+	if (pm_active)
-+		regcache_cache_bypass(component->regmap, true);
-+
-+	ret = snd_soc_component_read(component, mc->regbase, &regval);
-+
-+	if (pm_active)
-+		regcache_cache_bypass(component->regmap, false);
-+
-+	if (ret < 0)
-+		return ret;
-+
-+	ucontrol->value.integer.value[0] = regval;
-+
-+	return 0;
-+}
-+
-+#define SOC_SINGLE_REG_RO(xname, xreg) \
-+{	.iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = (xname), \
-+	.access = SNDRV_CTL_ELEM_ACCESS_READ | \
-+		  SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
-+	.info = snd_soc_info_xr_sx, .get = fsl_sai_get_reg, \
-+	.private_value = (unsigned long)&(struct soc_mreg_control) \
-+		{ .regbase = xreg, .regcount = 1, .nbits = 32, \
-+		  .invert = 0, .min = 0, .max = 0xffffffff, } }
-+
-+static const struct snd_kcontrol_new fsl_sai_pb_ctrls[] = {
-+	SOC_ENUM("Playback Timestamp Control", tstmp_enum[0]),
-+	SOC_ENUM("Playback Timestamp Increment", tstmp_enum[2]),
-+	SOC_SINGLE("Playback Timestamp Reset", FSL_SAI_TTCTL, 8, 1, 0),
-+	SOC_SINGLE("Playback Bit Counter Reset", FSL_SAI_TTCTL, 9, 1, 0),
-+	SOC_SINGLE_REG_RO("Playback Timestamp Counter", FSL_SAI_TTCTN),
-+	SOC_SINGLE_REG_RO("Playback Bit Counter", FSL_SAI_TBCTN),
-+	SOC_SINGLE_REG_RO("Playback Latched Timestamp Counter", FSL_SAI_TTCAP),
-+};
-+
-+static const struct snd_kcontrol_new fsl_sai_cp_ctrls[] = {
-+	SOC_ENUM("Capture Timestamp Control", tstmp_enum[1]),
-+	SOC_ENUM("Capture Timestamp Increment", tstmp_enum[3]),
-+	SOC_SINGLE("Capture Timestamp Reset", FSL_SAI_RTCTL, 8, 1, 0),
-+	SOC_SINGLE("Capture Bit Counter Reset", FSL_SAI_RTCTL, 9, 1, 0),
-+	SOC_SINGLE_REG_RO("Capture Timestamp Counter", FSL_SAI_RTCTN),
-+	SOC_SINGLE_REG_RO("Capture Bit Counter", FSL_SAI_RBCTN),
-+	SOC_SINGLE_REG_RO("Capture Latched Timestamp Counter", FSL_SAI_RTCAP),
-+};
-+
-+static int fsl_sai_pcm_new(struct snd_soc_pcm_runtime *rtd,
-+			   struct snd_soc_dai *dai)
-+{
-+	struct fsl_sai *sai = dev_get_drvdata(dai->dev);
-+	struct snd_pcm *pcm = rtd->pcm;
-+	bool ts_enabled = sai->verid.timestamp_en;
-+	struct snd_soc_component *comp = dai->component;
-+
-+	if (ts_enabled && pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream)
-+		snd_soc_add_component_controls(comp, fsl_sai_pb_ctrls,
-+					       ARRAY_SIZE(fsl_sai_pb_ctrls));
-+
-+	if (ts_enabled && pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream)
-+		snd_soc_add_component_controls(comp, fsl_sai_cp_ctrls,
-+					       ARRAY_SIZE(fsl_sai_cp_ctrls));
-+	return 0;
-+}
-+
- static int fsl_sai_dai_probe(struct snd_soc_dai *cpu_dai)
- {
- 	struct fsl_sai *sai = dev_get_drvdata(cpu_dai->dev);
-@@ -1030,6 +1114,7 @@ static int fsl_sai_dai_resume(struct snd
- }
- 
- static struct snd_soc_dai_driver fsl_sai_dai_template = {
-+	.pcm_new = fsl_sai_pcm_new,
- 	.probe = fsl_sai_dai_probe,
- 	.playback = {
- 		.stream_name = "CPU-Playback",
-@@ -1054,7 +1139,7 @@ static struct snd_soc_dai_driver fsl_sai
- };
- 
- static const struct snd_soc_component_driver fsl_component = {
--	.name           = "fsl-sai",
-+	.name	= "fsl-sai",
- };
- 
- static struct reg_default fsl_sai_v2_reg_defaults[] = {
-@@ -1141,6 +1226,14 @@ static bool fsl_sai_readable_reg(struct
- 	case FSL_SAI_MDIV:
- 	case FSL_SAI_VERID:
- 	case FSL_SAI_PARAM:
-+	case FSL_SAI_TTCTN:
-+	case FSL_SAI_RTCTN:
-+	case FSL_SAI_TTCTL:
-+	case FSL_SAI_TBCTN:
-+	case FSL_SAI_TTCAP:
-+	case FSL_SAI_RTCTL:
-+	case FSL_SAI_RBCTN:
-+	case FSL_SAI_RTCAP:
- 		return true;
- 	default:
- 		return false;
-@@ -1214,6 +1307,8 @@ static bool fsl_sai_writeable_reg(struct
- 	case FSL_SAI_RMR:
- 	case FSL_SAI_MCTL:
- 	case FSL_SAI_MDIV:
-+	case FSL_SAI_TTCTL:
-+	case FSL_SAI_RTCTL:
- 		return true;
- 	default:
- 		return false;
---- a/sound/soc/fsl/fsl_sai.h
-+++ b/sound/soc/fsl/fsl_sai.h
-@@ -210,6 +210,12 @@
- 
- #define SAI_FLAG_PMQOS   BIT(0)
- 
-+/* SAI timestamp and bitcounter */
-+#define FSL_SAI_xTCTL_TSEN BIT(0)
-+#define FSL_SAI_xTCTL_TSINC BIT(1)
-+#define FSL_SAI_xTCTL_RTSC BIT(8)
-+#define FSL_SAI_xTCTL_RBC BIT(9)
-+
- struct fsl_sai_soc_data {
- 	unsigned int fifo_depth;
- 	unsigned int fifos;
diff --git a/target/linux/layerscape/patches-5.4/801-audio-0074-ASoC-fsl_sai-fix-build-issue-of-incomplete-parenthes.patch b/target/linux/layerscape/patches-5.4/801-audio-0074-ASoC-fsl_sai-fix-build-issue-of-incomplete-parenthes.patch
deleted file mode 100644
index e9083294dd..0000000000
--- a/target/linux/layerscape/patches-5.4/801-audio-0074-ASoC-fsl_sai-fix-build-issue-of-incomplete-parenthes.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 0524e0b15966f8cbb010d430ec3fdcf9faf876f4 Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Wed, 1 Apr 2020 15:49:50 +0800
-Subject: [PATCH] ASoC: fsl_sai: fix build issue of incomplete parentheses
-
-Fix build issue of incomplete parentheses.
-
-Fixes: c516c26 (MLK-13574-2: ASoC: fsl_sai: refine driver for ip upgrade)
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- sound/soc/fsl/fsl_sai.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/sound/soc/fsl/fsl_sai.c
-+++ b/sound/soc/fsl/fsl_sai.c
-@@ -1634,7 +1634,7 @@ static int fsl_sai_probe(struct platform
- 	if (ret)
- 		goto err_pm_disable;
- 
--	if (sai->soc->imx)
-+	if (sai->soc->imx) {
- 		ret = imx_pcm_dma_init(pdev, IMX_SAI_DMABUF_SIZE);
- 		if (ret)
- 			goto err_pm_disable;
diff --git a/target/linux/layerscape/patches-5.4/802-can-0001-imx-busfreq-Add-API-header-file.patch b/target/linux/layerscape/patches-5.4/802-can-0001-imx-busfreq-Add-API-header-file.patch
deleted file mode 100644
index e7a31c551e..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0001-imx-busfreq-Add-API-header-file.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From c8055614385c90accdea4e7a046c5560bccc84cf Mon Sep 17 00:00:00 2001
-From: Leonard Crestez <leonard.crestez@nxp.com>
-Date: Mon, 13 May 2019 15:06:37 +0300
-Subject: [PATCH] imx busfreq: Add API header file
-
-Add sufficient enough definitions so that drivers which call
-request_bus_freq and release_bus_freq can compile even if
-CONFIG_HAVE_IMX_BUSFREQ is missing.
-
-Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
----
- include/linux/busfreq-imx.h | 77 +++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 77 insertions(+)
- create mode 100644 include/linux/busfreq-imx.h
-
---- /dev/null
-+++ b/include/linux/busfreq-imx.h
-@@ -0,0 +1,77 @@
-+/*
-+ * Copyright 2012-2016 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef __ASM_ARCH_MXC_BUSFREQ_H__
-+#define __ASM_ARCH_MXC_BUSFREQ_H__
-+
-+#include <linux/notifier.h>
-+#include <linux/regulator/consumer.h>
-+
-+/*
-+ * This enumerates busfreq low power mode entry and exit.
-+ */
-+enum busfreq_event {
-+	LOW_BUSFREQ_ENTER,
-+	LOW_BUSFREQ_EXIT,
-+};
-+
-+/*
-+ * This enumerates the system bus and ddr frequencies in various modes.
-+ * BUS_FREQ_HIGH - DDR @ 528MHz, AHB @ 132MHz.
-+ * BUS_FREQ_MED - DDR @ 400MHz, AHB @ 132MHz
-+ * BUS_FREQ_AUDIO - DDR @ 50MHz/100MHz, AHB @ 24MHz.
-+ * BUS_FREQ_LOW  - DDR @ 24MHz, AHB @ 24MHz.
-+ * BUS_FREQ_ULTRA_LOW - DDR @ 1MHz, AHB - 3MHz.
-+ *
-+ * Drivers need to request/release the bus/ddr frequencies based on
-+ * their performance requirements. Drivers cannot request/release
-+ * BUS_FREQ_ULTRA_LOW mode as this mode is automatically entered from
-+ * either BUS_FREQ_AUDIO or BUS_FREQ_LOW
-+ * modes.
-+ */
-+enum bus_freq_mode {
-+	BUS_FREQ_HIGH,
-+	BUS_FREQ_MED,
-+	BUS_FREQ_AUDIO,
-+	BUS_FREQ_LOW,
-+	BUS_FREQ_ULTRA_LOW,
-+};
-+
-+#if defined(CONFIG_HAVE_IMX_BUSFREQ) && !defined(CONFIG_ARM64)
-+extern struct regulator *arm_reg;
-+extern struct regulator *soc_reg;
-+void request_bus_freq(enum bus_freq_mode mode);
-+void release_bus_freq(enum bus_freq_mode mode);
-+int register_busfreq_notifier(struct notifier_block *nb);
-+int unregister_busfreq_notifier(struct notifier_block *nb);
-+int get_bus_freq_mode(void);
-+#elif defined(CONFIG_HAVE_IMX_BUSFREQ)
-+void request_bus_freq(enum bus_freq_mode mode);
-+void release_bus_freq(enum bus_freq_mode mode);
-+int get_bus_freq_mode(void);
-+#else
-+static inline void request_bus_freq(enum bus_freq_mode mode)
-+{
-+}
-+static inline void release_bus_freq(enum bus_freq_mode mode)
-+{
-+}
-+static inline int register_busfreq_notifier(struct notifier_block *nb)
-+{
-+	return 0;
-+}
-+static inline int unregister_busfreq_notifier(struct notifier_block *nb)
-+{
-+	return 0;
-+}
-+static inline int get_bus_freq_mode(void)
-+{
-+	return BUS_FREQ_HIGH;
-+}
-+#endif
-+#endif
diff --git a/target/linux/layerscape/patches-5.4/802-can-0002-can-rx-offload-fix-long-lines.patch b/target/linux/layerscape/patches-5.4/802-can-0002-can-rx-offload-fix-long-lines.patch
deleted file mode 100644
index 6f30ee2fea..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0002-can-rx-offload-fix-long-lines.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From 47058e3bd5c13b9db796a81083c049cb1d0b7883 Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Mon, 7 Oct 2019 09:59:49 +0200
-Subject: [PATCH] can: rx-offload: fix long lines
-
-This patch fixes the checkpatch warnings about too long lines.
-
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/dev/rx-offload.c | 39 ++++++++++++++++++++++++++-------------
- 1 file changed, 26 insertions(+), 13 deletions(-)
-
---- a/drivers/net/can/dev/rx-offload.c
-+++ b/drivers/net/can/dev/rx-offload.c
-@@ -1,7 +1,8 @@
- // SPDX-License-Identifier: GPL-2.0-only
--/*
-- * Copyright (c) 2014 David Jander, Protonic Holland
-- * Copyright (C) 2014-2017 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
-+/* Copyright (c) 2014      Protonic Holland,
-+ *                         David Jander
-+ * Copyright (C) 2014-2017 Pengutronix,
-+ *                         Marc Kleine-Budde <kernel@pengutronix.de>
-  */
- 
- #include <linux/can/dev.h>
-@@ -11,14 +12,17 @@ struct can_rx_offload_cb {
- 	u32 timestamp;
- };
- 
--static inline struct can_rx_offload_cb *can_rx_offload_get_cb(struct sk_buff *skb)
-+static inline struct can_rx_offload_cb *
-+can_rx_offload_get_cb(struct sk_buff *skb)
- {
- 	BUILD_BUG_ON(sizeof(struct can_rx_offload_cb) > sizeof(skb->cb));
- 
- 	return (struct can_rx_offload_cb *)skb->cb;
- }
- 
--static inline bool can_rx_offload_le(struct can_rx_offload *offload, unsigned int a, unsigned int b)
-+static inline bool
-+can_rx_offload_le(struct can_rx_offload *offload,
-+		  unsigned int a, unsigned int b)
- {
- 	if (offload->inc)
- 		return a <= b;
-@@ -26,7 +30,8 @@ static inline bool can_rx_offload_le(str
- 		return a >= b;
- }
- 
--static inline unsigned int can_rx_offload_inc(struct can_rx_offload *offload, unsigned int *val)
-+static inline unsigned int
-+can_rx_offload_inc(struct can_rx_offload *offload, unsigned int *val)
- {
- 	if (offload->inc)
- 		return (*val)++;
-@@ -36,7 +41,9 @@ static inline unsigned int can_rx_offloa
- 
- static int can_rx_offload_napi_poll(struct napi_struct *napi, int quota)
- {
--	struct can_rx_offload *offload = container_of(napi, struct can_rx_offload, napi);
-+	struct can_rx_offload *offload = container_of(napi,
-+						      struct can_rx_offload,
-+						      napi);
- 	struct net_device *dev = offload->dev;
- 	struct net_device_stats *stats = &dev->stats;
- 	struct sk_buff *skb;
-@@ -65,8 +72,9 @@ static int can_rx_offload_napi_poll(stru
- 	return work_done;
- }
- 
--static inline void __skb_queue_add_sort(struct sk_buff_head *head, struct sk_buff *new,
--					int (*compare)(struct sk_buff *a, struct sk_buff *b))
-+static inline void
-+__skb_queue_add_sort(struct sk_buff_head *head, struct sk_buff *new,
-+		     int (*compare)(struct sk_buff *a, struct sk_buff *b))
- {
- 	struct sk_buff *pos, *insert = NULL;
- 
-@@ -199,7 +207,8 @@ can_rx_offload_offload_one(struct can_rx
- 	return skb;
- }
- 
--int can_rx_offload_irq_offload_timestamp(struct can_rx_offload *offload, u64 pending)
-+int can_rx_offload_irq_offload_timestamp(struct can_rx_offload *offload,
-+					 u64 pending)
- {
- 	struct sk_buff_head skb_queue;
- 	unsigned int i;
-@@ -328,7 +337,9 @@ int can_rx_offload_queue_tail(struct can
- }
- EXPORT_SYMBOL_GPL(can_rx_offload_queue_tail);
- 
--static int can_rx_offload_init_queue(struct net_device *dev, struct can_rx_offload *offload, unsigned int weight)
-+static int can_rx_offload_init_queue(struct net_device *dev,
-+				     struct can_rx_offload *offload,
-+				     unsigned int weight)
- {
- 	offload->dev = dev;
- 
-@@ -346,7 +357,8 @@ static int can_rx_offload_init_queue(str
- 	return 0;
- }
- 
--int can_rx_offload_add_timestamp(struct net_device *dev, struct can_rx_offload *offload)
-+int can_rx_offload_add_timestamp(struct net_device *dev,
-+				 struct can_rx_offload *offload)
- {
- 	unsigned int weight;
- 
-@@ -366,7 +378,8 @@ int can_rx_offload_add_timestamp(struct
- }
- EXPORT_SYMBOL_GPL(can_rx_offload_add_timestamp);
- 
--int can_rx_offload_add_fifo(struct net_device *dev, struct can_rx_offload *offload, unsigned int weight)
-+int can_rx_offload_add_fifo(struct net_device *dev,
-+			    struct can_rx_offload *offload, unsigned int weight)
- {
- 	if (!offload->mailbox_read)
- 		return -EINVAL;
diff --git a/target/linux/layerscape/patches-5.4/802-can-0003-can-rx-offload-can_rx_offload_compare-fix-typo.patch b/target/linux/layerscape/patches-5.4/802-can-0003-can-rx-offload-can_rx_offload_compare-fix-typo.patch
deleted file mode 100644
index 5861dbe0d3..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0003-can-rx-offload-can_rx_offload_compare-fix-typo.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From e1a24fd01ca938096aebe397a547aa2409368ab5 Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Mon, 7 Oct 2019 10:00:25 +0200
-Subject: [PATCH] can: rx-offload: can_rx_offload_compare(): fix typo
-
-This patch fixes a typo found by checkpatch.
-
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/dev/rx-offload.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/can/dev/rx-offload.c
-+++ b/drivers/net/can/dev/rx-offload.c
-@@ -109,7 +109,7 @@ static int can_rx_offload_compare(struct
- 	cb_a = can_rx_offload_get_cb(a);
- 	cb_b = can_rx_offload_get_cb(b);
- 
--	/* Substract two u32 and return result as int, to keep
-+	/* Subtract two u32 and return result as int, to keep
- 	 * difference steady around the u32 overflow.
- 	 */
- 	return cb_b->timestamp - cb_a->timestamp;
diff --git a/target/linux/layerscape/patches-5.4/802-can-0004-can-rx-offload-can_rx_offload_irq_offload_timestamp-.patch b/target/linux/layerscape/patches-5.4/802-can-0004-can-rx-offload-can_rx_offload_irq_offload_timestamp-.patch
deleted file mode 100644
index 4501020414..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0004-can-rx-offload-can_rx_offload_irq_offload_timestamp-.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From b95cae85e913fb13f4c8f1241be85725e4dffeed Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Mon, 7 Oct 2019 10:00:52 +0200
-Subject: [PATCH] can: rx-offload: can_rx_offload_irq_offload_timestamp():
- don't use assignment in if condition
-
-This patch moves the assignment of queue_len out of the if condition.
-
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/dev/rx-offload.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/can/dev/rx-offload.c
-+++ b/drivers/net/can/dev/rx-offload.c
-@@ -238,8 +238,8 @@ int can_rx_offload_irq_offload_timestamp
- 		skb_queue_splice_tail(&skb_queue, &offload->skb_queue);
- 		spin_unlock_irqrestore(&offload->skb_queue.lock, flags);
- 
--		if ((queue_len = skb_queue_len(&offload->skb_queue)) >
--		    (offload->skb_queue_len_max / 8))
-+		queue_len = skb_queue_len(&offload->skb_queue);
-+		if (queue_len > offload->skb_queue_len_max / 8)
- 			netdev_dbg(offload->dev, "%s: queue_len=%d\n",
- 				   __func__, queue_len);
- 
diff --git a/target/linux/layerscape/patches-5.4/802-can-0005-can-rx-offload-can_rx_offload_reset-remove-no-op-fun.patch b/target/linux/layerscape/patches-5.4/802-can-0005-can-rx-offload-can_rx_offload_reset-remove-no-op-fun.patch
deleted file mode 100644
index 68e5c4c604..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0005-can-rx-offload-can_rx_offload_reset-remove-no-op-fun.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 88b21e30646ba263df647469c3af8c09e43a99d6 Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Mon, 7 Oct 2019 13:36:58 +0200
-Subject: [PATCH] can: rx-offload: can_rx_offload_reset(): remove no-op
- function
-
-This patch removes the function can_rx_offload_reset(), as it does
-nothing. If we ever need this function, add it back again.
-
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/dev/rx-offload.c   | 7 -------
- include/linux/can/rx-offload.h | 1 -
- 2 files changed, 8 deletions(-)
-
---- a/drivers/net/can/dev/rx-offload.c
-+++ b/drivers/net/can/dev/rx-offload.c
-@@ -348,7 +348,6 @@ static int can_rx_offload_init_queue(str
- 	offload->skb_queue_len_max *= 4;
- 	skb_queue_head_init(&offload->skb_queue);
- 
--	can_rx_offload_reset(offload);
- 	netif_napi_add(dev, &offload->napi, can_rx_offload_napi_poll, weight);
- 
- 	dev_dbg(dev->dev.parent, "%s: skb_queue_len_max=%d\n",
-@@ -390,7 +389,6 @@ EXPORT_SYMBOL_GPL(can_rx_offload_add_fif
- 
- void can_rx_offload_enable(struct can_rx_offload *offload)
- {
--	can_rx_offload_reset(offload);
- 	napi_enable(&offload->napi);
- }
- EXPORT_SYMBOL_GPL(can_rx_offload_enable);
-@@ -401,8 +399,3 @@ void can_rx_offload_del(struct can_rx_of
- 	skb_queue_purge(&offload->skb_queue);
- }
- EXPORT_SYMBOL_GPL(can_rx_offload_del);
--
--void can_rx_offload_reset(struct can_rx_offload *offload)
--{
--}
--EXPORT_SYMBOL_GPL(can_rx_offload_reset);
---- a/include/linux/can/rx-offload.h
-+++ b/include/linux/can/rx-offload.h
-@@ -44,7 +44,6 @@ unsigned int can_rx_offload_get_echo_skb
- 					 unsigned int idx, u32 timestamp);
- int can_rx_offload_queue_tail(struct can_rx_offload *offload,
- 			      struct sk_buff *skb);
--void can_rx_offload_reset(struct can_rx_offload *offload);
- void can_rx_offload_del(struct can_rx_offload *offload);
- void can_rx_offload_enable(struct can_rx_offload *offload);
- 
diff --git a/target/linux/layerscape/patches-5.4/802-can-0006-can-rx-offload-Prepare-for-CAN-FD-support.patch b/target/linux/layerscape/patches-5.4/802-can-0006-can-rx-offload-Prepare-for-CAN-FD-support.patch
deleted file mode 100644
index d5c88ac0c8..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0006-can-rx-offload-Prepare-for-CAN-FD-support.patch
+++ /dev/null
@@ -1,206 +0,0 @@
-From 42abc4a8a97a87734c759c02c5ba255ed5124a2c Mon Sep 17 00:00:00 2001
-From: Joakim Zhang <qiangqing.zhang@nxp.com>
-Date: Fri, 12 Jul 2019 08:02:38 +0000
-Subject: [PATCH] can: rx-offload: Prepare for CAN FD support
-
-The skbs for classic CAN and CAN FD frames are allocated with separate
-functions: alloc_can_skb() and alloc_canfd_skb().
-
-In order to support CAN FD frames via the rx-offload helper, the driver
-itself has to allocate the skb (depending whether it received a classic
-CAN or CAN FD frame), as the rx-offload helper cannot know which kind of
-CAN frame the driver has received.
-
-This patch moves the allocation of the skb into the struct
-can_rx_offload::mailbox_read callbacks of the the flexcan and ti_hecc
-driver and adjusts the rx-offload helper accordingly.
-
-Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c      | 27 +++++++++++-----
- drivers/net/can/dev/rx-offload.c   | 70 ++++++++++--------------------------------
- include/linux/can/rx-offload.h |  6 ++--
- 3 files changed, 40 insertions(+), 63 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -791,16 +791,23 @@ static inline struct flexcan_priv *rx_of
- 	return container_of(offload, struct flexcan_priv, offload);
- }
- 
--static unsigned int flexcan_mailbox_read(struct can_rx_offload *offload,
--					 struct can_frame *cf,
--					 u32 *timestamp, unsigned int n)
-+static struct sk_buff *flexcan_mailbox_read(struct can_rx_offload *offload,
-+					    unsigned int n, u32 *timestamp,
-+					    bool drop)
- {
- 	struct flexcan_priv *priv = rx_offload_to_priv(offload);
- 	struct flexcan_regs __iomem *regs = priv->regs;
- 	struct flexcan_mb __iomem *mb;
-+	struct sk_buff *skb;
-+	struct can_frame *cf;
- 	u32 reg_ctrl, reg_id, reg_iflag1;
- 	int i;
- 
-+	if (unlikely(drop)) {
-+		skb = ERR_PTR(-ENOBUFS);
-+		goto mark_as_read;
-+	}
-+
- 	mb = flexcan_get_mb(priv, n);
- 
- 	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
-@@ -814,7 +821,7 @@ static unsigned int flexcan_mailbox_read
- 		code = reg_ctrl & FLEXCAN_MB_CODE_MASK;
- 		if ((code != FLEXCAN_MB_CODE_RX_FULL) &&
- 		    (code != FLEXCAN_MB_CODE_RX_OVERRUN))
--			return 0;
-+			return NULL;
- 
- 		if (code == FLEXCAN_MB_CODE_RX_OVERRUN) {
- 			/* This MB was overrun, we lost data */
-@@ -824,11 +831,17 @@ static unsigned int flexcan_mailbox_read
- 	} else {
- 		reg_iflag1 = priv->read(&regs->iflag1);
- 		if (!(reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_AVAILABLE))
--			return 0;
-+			return NULL;
- 
- 		reg_ctrl = priv->read(&mb->can_ctrl);
- 	}
- 
-+	skb = alloc_can_skb(offload->dev, &cf);
-+	if (!skb) {
-+		skb = ERR_PTR(-ENOMEM);
-+		goto mark_as_read;
-+	}
-+
- 	/* increase timstamp to full 32 bit */
- 	*timestamp = reg_ctrl << 16;
- 
-@@ -847,7 +860,7 @@ static unsigned int flexcan_mailbox_read
- 		*(__be32 *)(cf->data + i) = data;
- 	}
- 
--	/* mark as read */
-+ mark_as_read:
- 	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
- 		/* Clear IRQ */
- 		if (n < 32)
-@@ -864,7 +877,7 @@ static unsigned int flexcan_mailbox_read
- 	 */
- 	priv->read(&regs->timer);
- 
--	return 1;
-+	return skb;
- }
- 
- 
---- a/drivers/net/can/dev/rx-offload.c
-+++ b/drivers/net/can/dev/rx-offload.c
-@@ -139,71 +139,35 @@ static int can_rx_offload_compare(struct
- static struct sk_buff *
- can_rx_offload_offload_one(struct can_rx_offload *offload, unsigned int n)
- {
--	struct sk_buff *skb = NULL, *skb_error = NULL;
-+	struct sk_buff *skb;
- 	struct can_rx_offload_cb *cb;
--	struct can_frame *cf;
--	int ret;
-+	bool drop = false;
-+	u32 timestamp;
- 
--	if (likely(skb_queue_len(&offload->skb_queue) <
--		   offload->skb_queue_len_max)) {
--		skb = alloc_can_skb(offload->dev, &cf);
--		if (unlikely(!skb))
--			skb_error = ERR_PTR(-ENOMEM);	/* skb alloc failed */
--	} else {
--		skb_error = ERR_PTR(-ENOBUFS);		/* skb_queue is full */
--	}
--
--	/* If queue is full or skb not available, drop by reading into
--	 * overflow buffer.
--	 */
--	if (unlikely(skb_error)) {
--		struct can_frame cf_overflow;
--		u32 timestamp;
--
--		ret = offload->mailbox_read(offload, &cf_overflow,
--					    &timestamp, n);
--
--		/* Mailbox was empty. */
--		if (unlikely(!ret))
--			return NULL;
--
--		/* Mailbox has been read and we're dropping it or
--		 * there was a problem reading the mailbox.
--		 *
--		 * Increment error counters in any case.
--		 */
--		offload->dev->stats.rx_dropped++;
--		offload->dev->stats.rx_fifo_errors++;
--
--		/* There was a problem reading the mailbox, propagate
--		 * error value.
--		 */
--		if (unlikely(ret < 0))
--			return ERR_PTR(ret);
--
--		return skb_error;
--	}
--
--	cb = can_rx_offload_get_cb(skb);
--	ret = offload->mailbox_read(offload, cf, &cb->timestamp, n);
-+	/* If queue is full drop frame */
-+	if (unlikely(skb_queue_len(&offload->skb_queue) >
-+		     offload->skb_queue_len_max))
-+		drop = true;
- 
-+	skb = offload->mailbox_read(offload, n, &timestamp, drop);
- 	/* Mailbox was empty. */
--	if (unlikely(!ret)) {
--		kfree_skb(skb);
-+	if (unlikely(!skb))
- 		return NULL;
--	}
--
--	/* There was a problem reading the mailbox, propagate error value. */
--	if (unlikely(ret < 0)) {
--		kfree_skb(skb);
- 
-+	/* There was a problem reading the mailbox, propagate
-+	 * error value.
-+	 */
-+	if (unlikely(IS_ERR(skb))) {
- 		offload->dev->stats.rx_dropped++;
- 		offload->dev->stats.rx_fifo_errors++;
- 
--		return ERR_PTR(ret);
-+		return skb;
- 	}
- 
- 	/* Mailbox was read. */
-+	cb = can_rx_offload_get_cb(skb);
-+	cb->timestamp = timestamp;
-+
- 	return skb;
- }
- 
---- a/include/linux/can/rx-offload.h
-+++ b/include/linux/can/rx-offload.h
-@@ -15,9 +15,9 @@
- struct can_rx_offload {
- 	struct net_device *dev;
- 
--	unsigned int (*mailbox_read)(struct can_rx_offload *offload,
--				     struct can_frame *cf,
--				     u32 *timestamp, unsigned int mb);
-+	struct sk_buff *(*mailbox_read)(struct can_rx_offload *offload,
-+					unsigned int mb, u32 *timestamp,
-+					bool drop);
- 
- 	struct sk_buff_head skb_queue;
- 	u32 skb_queue_len_max;
diff --git a/target/linux/layerscape/patches-5.4/802-can-0007-can-flexcan-use-devm_platform_ioremap_resource-to-si.patch b/target/linux/layerscape/patches-5.4/802-can-0007-can-flexcan-use-devm_platform_ioremap_resource-to-si.patch
deleted file mode 100644
index 35c35f67a2..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0007-can-flexcan-use-devm_platform_ioremap_resource-to-si.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 9198f241a7205bd85b89bda08fce5c2446a12e23 Mon Sep 17 00:00:00 2001
-From: Joakim Zhang <qiangqing.zhang@nxp.com>
-Date: Sun, 29 Sep 2019 08:32:09 +0000
-Subject: [PATCH] can: flexcan: use devm_platform_ioremap_resource() to
- simplify code
-
-Use the new helper devm_platform_ioremap_resource() which wraps the
-platform_get_resource() and devm_ioremap_resource() together to simplify
-the code.
-
-Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
-Reviewed-by: Sean Nyekjaer <sean@geanix.com>
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -1585,7 +1585,6 @@ static int flexcan_probe(struct platform
- 	struct net_device *dev;
- 	struct flexcan_priv *priv;
- 	struct regulator *reg_xceiver;
--	struct resource *mem;
- 	struct clk *clk_ipg = NULL, *clk_per = NULL;
- 	struct flexcan_regs __iomem *regs;
- 	int err, irq;
-@@ -1620,12 +1619,11 @@ static int flexcan_probe(struct platform
- 		clock_freq = clk_get_rate(clk_per);
- 	}
- 
--	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	irq = platform_get_irq(pdev, 0);
- 	if (irq <= 0)
- 		return -ENODEV;
- 
--	regs = devm_ioremap_resource(&pdev->dev, mem);
-+	regs = devm_platform_ioremap_resource(pdev, 0);
- 	if (IS_ERR(regs))
- 		return PTR_ERR(regs);
- 
diff --git a/target/linux/layerscape/patches-5.4/802-can-0008-can-flexcan-flexcan_irq_state-only-read-timestamp-if.patch b/target/linux/layerscape/patches-5.4/802-can-0008-can-flexcan-flexcan_irq_state-only-read-timestamp-if.patch
deleted file mode 100644
index 2f839fcfc0..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0008-can-flexcan-flexcan_irq_state-only-read-timestamp-if.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 1a92e5a9109963e2491eec111b84b35b4e2adc8f Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Wed, 9 Oct 2019 15:15:37 +0200
-Subject: [PATCH] can: flexcan: flexcan_irq_state(): only read timestamp if
- needed
-
-The function flexcan_irq_state() checks the controller for CAN state
-changes and pushes a skb with the new state and a timestamp into the
-rx-offload framework.
-
-This patch optimizes the function by only reading the timestamp, if a
-state change is detected.
-
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -751,8 +751,6 @@ static void flexcan_irq_state(struct net
- 	u32 timestamp;
- 	int err;
- 
--	timestamp = priv->read(&regs->timer) << 16;
--
- 	flt = reg_esr & FLEXCAN_ESR_FLT_CONF_MASK;
- 	if (likely(flt == FLEXCAN_ESR_FLT_CONF_ACTIVE)) {
- 		tx_state = unlikely(reg_esr & FLEXCAN_ESR_TX_WRN) ?
-@@ -772,6 +770,8 @@ static void flexcan_irq_state(struct net
- 	if (likely(new_state == priv->can.state))
- 		return;
- 
-+	timestamp = priv->read(&regs->timer) << 16;
-+
- 	skb = alloc_can_err_skb(dev, &cf);
- 	if (unlikely(!skb))
- 		return;
diff --git a/target/linux/layerscape/patches-5.4/802-can-0009-can-flexcan-rename-macro-FLEXCAN_IFLAG_MB-FLEXCAN_IF.patch b/target/linux/layerscape/patches-5.4/802-can-0009-can-flexcan-rename-macro-FLEXCAN_IFLAG_MB-FLEXCAN_IF.patch
deleted file mode 100644
index 535fccaff6..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0009-can-flexcan-rename-macro-FLEXCAN_IFLAG_MB-FLEXCAN_IF.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 86608c5578b7a276e0edcedc976c604e283fd177 Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Fri, 1 Mar 2019 11:12:13 +0100
-Subject: [PATCH] can: flexcan: rename macro FLEXCAN_IFLAG_MB() ->
- FLEXCAN_IFLAG2_MB()
-
-The macro FLEXCAN_IFLAG_MB() is always used for the iflag2 register, so
-rename it to FLEXCAN_IFLAG2_MB()
-
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -142,7 +142,7 @@
- #define FLEXCAN_TX_MB_RESERVED_OFF_FIFO		8
- #define FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP	0
- #define FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST	(FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP + 1)
--#define FLEXCAN_IFLAG_MB(x)		BIT((x) & 0x1f)
-+#define FLEXCAN_IFLAG2_MB(x)		BIT((x) & 0x1f)
- #define FLEXCAN_IFLAG_RX_FIFO_OVERFLOW	BIT(7)
- #define FLEXCAN_IFLAG_RX_FIFO_WARN	BIT(6)
- #define FLEXCAN_IFLAG_RX_FIFO_AVAILABLE	BIT(5)
-@@ -887,7 +887,7 @@ static inline u64 flexcan_read_reg_iflag
- 	u32 iflag1, iflag2;
- 
- 	iflag2 = priv->read(&regs->iflag2) & priv->reg_imask2_default &
--		~FLEXCAN_IFLAG_MB(priv->tx_mb_idx);
-+		~FLEXCAN_IFLAG2_MB(priv->tx_mb_idx);
- 	iflag1 = priv->read(&regs->iflag1) & priv->reg_imask1_default;
- 
- 	return (u64)iflag2 << 32 | iflag1;
-@@ -937,7 +937,7 @@ static irqreturn_t flexcan_irq(int irq,
- 	reg_iflag2 = priv->read(&regs->iflag2);
- 
- 	/* transmission complete interrupt */
--	if (reg_iflag2 & FLEXCAN_IFLAG_MB(priv->tx_mb_idx)) {
-+	if (reg_iflag2 & FLEXCAN_IFLAG2_MB(priv->tx_mb_idx)) {
- 		u32 reg_ctrl = priv->read(&priv->tx_mb->can_ctrl);
- 
- 		handled = IRQ_HANDLED;
-@@ -949,7 +949,7 @@ static irqreturn_t flexcan_irq(int irq,
- 		/* after sending a RTR frame MB is in RX mode */
- 		priv->write(FLEXCAN_MB_CODE_TX_INACTIVE,
- 			    &priv->tx_mb->can_ctrl);
--		priv->write(FLEXCAN_IFLAG_MB(priv->tx_mb_idx), &regs->iflag2);
-+		priv->write(FLEXCAN_IFLAG2_MB(priv->tx_mb_idx), &regs->iflag2);
- 		netif_wake_queue(dev);
- 	}
- 
-@@ -1329,7 +1329,7 @@ static int flexcan_open(struct net_devic
- 	priv->tx_mb = flexcan_get_mb(priv, priv->tx_mb_idx);
- 
- 	priv->reg_imask1_default = 0;
--	priv->reg_imask2_default = FLEXCAN_IFLAG_MB(priv->tx_mb_idx);
-+	priv->reg_imask2_default = FLEXCAN_IFLAG2_MB(priv->tx_mb_idx);
- 
- 	priv->offload.mailbox_read = flexcan_mailbox_read;
- 
diff --git a/target/linux/layerscape/patches-5.4/802-can-0010-can-flexcan-flexcan_irq-rename-variable-reg_iflag-re.patch b/target/linux/layerscape/patches-5.4/802-can-0010-can-flexcan-flexcan_irq-rename-variable-reg_iflag-re.patch
deleted file mode 100644
index d893dd6cd1..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0010-can-flexcan-flexcan_irq-rename-variable-reg_iflag-re.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From f7f3c7abdef9fb6c9668a3945ec791fb206b4ee8 Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Fri, 1 Mar 2019 16:29:47 +0100
-Subject: [PATCH] can: flexcan: flexcan_irq(): rename variable reg_iflag ->
- reg_iflag_rx
-
-This patch renames the variable reg_iflag in the flexcan_irq() function
-to reg_iflag_rx. This better reflects the contents of the varibale. It
-does not hold the unmodified iflag registers, instead all non RX
-interrupts have been masked.
-
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -905,13 +905,13 @@ static irqreturn_t flexcan_irq(int irq,
- 
- 	/* reception interrupt */
- 	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
--		u64 reg_iflag;
-+		u64 reg_iflag_rx;
- 		int ret;
- 
--		while ((reg_iflag = flexcan_read_reg_iflag_rx(priv))) {
-+		while ((reg_iflag_rx = flexcan_read_reg_iflag_rx(priv))) {
- 			handled = IRQ_HANDLED;
- 			ret = can_rx_offload_irq_offload_timestamp(&priv->offload,
--								   reg_iflag);
-+								   reg_iflag_rx);
- 			if (!ret)
- 				break;
- 		}
diff --git a/target/linux/layerscape/patches-5.4/802-can-0011-can-flexcan-rename-struct-flexcan_priv-reg_imask-1-2.patch b/target/linux/layerscape/patches-5.4/802-can-0011-can-flexcan-rename-struct-flexcan_priv-reg_imask-1-2.patch
deleted file mode 100644
index ce0102182f..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0011-can-flexcan-rename-struct-flexcan_priv-reg_imask-1-2.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From a1126887f068def0bc11f5260e55e25b9c03e3ea Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Fri, 1 Mar 2019 09:18:54 +0100
-Subject: [PATCH] can: flexcan: rename struct
- flexcan_priv::reg_imask{1,2}_default to rx_mask{1,2}
-
-The flexcan IP core has up to 64 mailboxes, each one has a corresponding
-interrupt bit in the iflag1 or iflag2 registers and a mask bit in the
-imask1 or imask2 registers.
-
-In the timestamp (i.e. non FIFO) mode the driver needs to mask out all
-non RX interrupt sources and uses the precomputed values
-reg_imask1_default and reg_imask2_default of struct flexcan_priv for
-this.
-
-However in the current driver the reg_imask{1,2}_default cannot be used
-directly to get the pending RX interrupts. The TX interrupt is part of
-these variables, so it needs to be masked out, too.
-
-This is a preparation patch to clean up calculation of the pending RX
-interrupts, it only renames the variables from
-
-    reg_imask{1,2}_default
-
-to
-
-    rx_mask{1,2}
-
-To better reflect their meaning after the complete conversion. This
-change is done with the following sed command:
-
-    sed -i -e "s/reg_imask\(1\|2\)_default/rx_mask\1/" drivers/net/can/flexcan.c
-
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 22 +++++++++++-----------
- 1 file changed, 11 insertions(+), 11 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -278,8 +278,8 @@ struct flexcan_priv {
- 	u8 clk_src;	/* clock source of CAN Protocol Engine */
- 
- 	u32 reg_ctrl_default;
--	u32 reg_imask1_default;
--	u32 reg_imask2_default;
-+	u32 rx_mask1;
-+	u32 rx_mask2;
- 
- 	struct clk *clk_ipg;
- 	struct clk *clk_per;
-@@ -886,9 +886,9 @@ static inline u64 flexcan_read_reg_iflag
- 	struct flexcan_regs __iomem *regs = priv->regs;
- 	u32 iflag1, iflag2;
- 
--	iflag2 = priv->read(&regs->iflag2) & priv->reg_imask2_default &
-+	iflag2 = priv->read(&regs->iflag2) & priv->rx_mask2 &
- 		~FLEXCAN_IFLAG2_MB(priv->tx_mb_idx);
--	iflag1 = priv->read(&regs->iflag1) & priv->reg_imask1_default;
-+	iflag1 = priv->read(&regs->iflag1) & priv->rx_mask1;
- 
- 	return (u64)iflag2 << 32 | iflag1;
- }
-@@ -1233,8 +1233,8 @@ static int flexcan_chip_start(struct net
- 	/* enable interrupts atomically */
- 	disable_irq(dev->irq);
- 	priv->write(priv->reg_ctrl_default, &regs->ctrl);
--	priv->write(priv->reg_imask1_default, &regs->imask1);
--	priv->write(priv->reg_imask2_default, &regs->imask2);
-+	priv->write(priv->rx_mask1, &regs->imask1);
-+	priv->write(priv->rx_mask2, &regs->imask2);
- 	enable_irq(dev->irq);
- 
- 	/* print chip status */
-@@ -1328,8 +1328,8 @@ static int flexcan_open(struct net_devic
- 	priv->tx_mb_idx = priv->mb_count - 1;
- 	priv->tx_mb = flexcan_get_mb(priv, priv->tx_mb_idx);
- 
--	priv->reg_imask1_default = 0;
--	priv->reg_imask2_default = FLEXCAN_IFLAG2_MB(priv->tx_mb_idx);
-+	priv->rx_mask1 = 0;
-+	priv->rx_mask2 = FLEXCAN_IFLAG2_MB(priv->tx_mb_idx);
- 
- 	priv->offload.mailbox_read = flexcan_mailbox_read;
- 
-@@ -1341,12 +1341,12 @@ static int flexcan_open(struct net_devic
- 
- 		imask = GENMASK_ULL(priv->offload.mb_last,
- 				    priv->offload.mb_first);
--		priv->reg_imask1_default |= imask;
--		priv->reg_imask2_default |= imask >> 32;
-+		priv->rx_mask1 |= imask;
-+		priv->rx_mask2 |= imask >> 32;
- 
- 		err = can_rx_offload_add_timestamp(dev, &priv->offload);
- 	} else {
--		priv->reg_imask1_default |= FLEXCAN_IFLAG_RX_FIFO_OVERFLOW |
-+		priv->rx_mask1 |= FLEXCAN_IFLAG_RX_FIFO_OVERFLOW |
- 			FLEXCAN_IFLAG_RX_FIFO_AVAILABLE;
- 		err = can_rx_offload_add_fifo(dev, &priv->offload,
- 					      FLEXCAN_NAPI_WEIGHT);
diff --git a/target/linux/layerscape/patches-5.4/802-can-0012-can-flexcan-remove-TX-mailbox-bit-from-struct-flexca.patch b/target/linux/layerscape/patches-5.4/802-can-0012-can-flexcan-remove-TX-mailbox-bit-from-struct-flexca.patch
deleted file mode 100644
index 8ab8e29dbd..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0012-can-flexcan-remove-TX-mailbox-bit-from-struct-flexca.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 916df9ddac295df428a304fd03ed492ad10e900c Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Fri, 1 Mar 2019 10:22:26 +0100
-Subject: [PATCH] can: flexcan: remove TX mailbox bit from struct
- flexcan_priv::rx_mask{1,2}
-
-The flexcan IP core has up to 64 mailboxes, each one has a corresponding
-interrupt bit in the iflag1 or iflag2 registers and a mask bit in the
-imask1 or imask2 registers.
-
-In the timestamp (i.e. non FIFO) mode the driver needs to mask out all
-non RX interrupt sources and uses the precomputed values rx_mask1 and
-rx_mask2 of struct flexcan_priv for this.
-
-Currently these values cannot be used directly, as they contain the TX
-mailbox flag. This patch removes the TX flag from flexcan_priv::rx_mask1
-and flexcan_priv::rx_mask2, and sets the TX flag directly when writing
-the regs->iflag1 and regs->iflag2 into the hardware.
-
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 14 +++++---------
- 1 file changed, 5 insertions(+), 9 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -886,8 +886,7 @@ static inline u64 flexcan_read_reg_iflag
- 	struct flexcan_regs __iomem *regs = priv->regs;
- 	u32 iflag1, iflag2;
- 
--	iflag2 = priv->read(&regs->iflag2) & priv->rx_mask2 &
--		~FLEXCAN_IFLAG2_MB(priv->tx_mb_idx);
-+	iflag2 = priv->read(&regs->iflag2) & priv->rx_mask2;
- 	iflag1 = priv->read(&regs->iflag1) & priv->rx_mask1;
- 
- 	return (u64)iflag2 << 32 | iflag1;
-@@ -1234,7 +1233,7 @@ static int flexcan_chip_start(struct net
- 	disable_irq(dev->irq);
- 	priv->write(priv->reg_ctrl_default, &regs->ctrl);
- 	priv->write(priv->rx_mask1, &regs->imask1);
--	priv->write(priv->rx_mask2, &regs->imask2);
-+	priv->write(priv->rx_mask2 | FLEXCAN_IFLAG2_MB(priv->tx_mb_idx), &regs->imask2);
- 	enable_irq(dev->irq);
- 
- 	/* print chip status */
-@@ -1328,9 +1327,6 @@ static int flexcan_open(struct net_devic
- 	priv->tx_mb_idx = priv->mb_count - 1;
- 	priv->tx_mb = flexcan_get_mb(priv, priv->tx_mb_idx);
- 
--	priv->rx_mask1 = 0;
--	priv->rx_mask2 = FLEXCAN_IFLAG2_MB(priv->tx_mb_idx);
--
- 	priv->offload.mailbox_read = flexcan_mailbox_read;
- 
- 	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
-@@ -1341,12 +1337,12 @@ static int flexcan_open(struct net_devic
- 
- 		imask = GENMASK_ULL(priv->offload.mb_last,
- 				    priv->offload.mb_first);
--		priv->rx_mask1 |= imask;
--		priv->rx_mask2 |= imask >> 32;
-+		priv->rx_mask1 = imask;
-+		priv->rx_mask2 = imask >> 32;
- 
- 		err = can_rx_offload_add_timestamp(dev, &priv->offload);
- 	} else {
--		priv->rx_mask1 |= FLEXCAN_IFLAG_RX_FIFO_OVERFLOW |
-+		priv->rx_mask1 = FLEXCAN_IFLAG_RX_FIFO_OVERFLOW |
- 			FLEXCAN_IFLAG_RX_FIFO_AVAILABLE;
- 		err = can_rx_offload_add_fifo(dev, &priv->offload,
- 					      FLEXCAN_NAPI_WEIGHT);
diff --git a/target/linux/layerscape/patches-5.4/802-can-0013-can-flexcan-convert-struct-flexcan_priv-rx_mask-1-2-.patch b/target/linux/layerscape/patches-5.4/802-can-0013-can-flexcan-convert-struct-flexcan_priv-rx_mask-1-2-.patch
deleted file mode 100644
index 9533726472..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0013-can-flexcan-convert-struct-flexcan_priv-rx_mask-1-2-.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From 6adf87956ee1043e6bf0ef83fa0eec1e755c0d48 Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Fri, 1 Mar 2019 12:17:30 +0100
-Subject: [PATCH] can: flexcan: convert struct flexcan_priv::rx_mask{1,2} to
- rx_mask
-
-The flexcan IP core has up to 64 mailboxes, each one has a corresponding
-interrupt bit in the iflag1 or iflag2 registers and a mask bit in the
-imask1 or imask2 registers.
-
-In the timestamp (i.e. non FIFO) mode the driver needs to mask out all non RX
-interrupt sources and uses the precomputed values rx_mask1 and rx_mask2 of
-struct flexcan_priv for this.
-
-This patch merges the two u32 rx_mask1 and rx_mask2 to a single u64 rx_mask
-variable, which simplifies the code a bit.
-
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 30 +++++++++++++-----------------
- 1 file changed, 13 insertions(+), 17 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -142,6 +142,7 @@
- #define FLEXCAN_TX_MB_RESERVED_OFF_FIFO		8
- #define FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP	0
- #define FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST	(FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP + 1)
-+#define FLEXCAN_IFLAG_MB(x)		BIT_ULL(x)
- #define FLEXCAN_IFLAG2_MB(x)		BIT((x) & 0x1f)
- #define FLEXCAN_IFLAG_RX_FIFO_OVERFLOW	BIT(7)
- #define FLEXCAN_IFLAG_RX_FIFO_WARN	BIT(6)
-@@ -277,9 +278,8 @@ struct flexcan_priv {
- 	u8 mb_size;
- 	u8 clk_src;	/* clock source of CAN Protocol Engine */
- 
-+	u64 rx_mask;
- 	u32 reg_ctrl_default;
--	u32 rx_mask1;
--	u32 rx_mask2;
- 
- 	struct clk *clk_ipg;
- 	struct clk *clk_per;
-@@ -880,16 +880,15 @@ static struct sk_buff *flexcan_mailbox_r
- 	return skb;
- }
- 
--
- static inline u64 flexcan_read_reg_iflag_rx(struct flexcan_priv *priv)
- {
- 	struct flexcan_regs __iomem *regs = priv->regs;
--	u32 iflag1, iflag2;
-+	u64 iflag;
- 
--	iflag2 = priv->read(&regs->iflag2) & priv->rx_mask2;
--	iflag1 = priv->read(&regs->iflag1) & priv->rx_mask1;
-+	iflag = (u64)priv->read(&regs->iflag2) << 32 |
-+		priv->read(&regs->iflag1);
- 
--	return (u64)iflag2 << 32 | iflag1;
-+	return iflag & priv->rx_mask;
- }
- 
- static irqreturn_t flexcan_irq(int irq, void *dev_id)
-@@ -1060,6 +1059,7 @@ static int flexcan_chip_start(struct net
- 	struct flexcan_priv *priv = netdev_priv(dev);
- 	struct flexcan_regs __iomem *regs = priv->regs;
- 	u32 reg_mcr, reg_ctrl, reg_ctrl2, reg_mecr;
-+	u64 reg_imask;
- 	int err, i;
- 	struct flexcan_mb __iomem *mb;
- 
-@@ -1232,8 +1232,9 @@ static int flexcan_chip_start(struct net
- 	/* enable interrupts atomically */
- 	disable_irq(dev->irq);
- 	priv->write(priv->reg_ctrl_default, &regs->ctrl);
--	priv->write(priv->rx_mask1, &regs->imask1);
--	priv->write(priv->rx_mask2 | FLEXCAN_IFLAG2_MB(priv->tx_mb_idx), &regs->imask2);
-+	reg_imask = priv->rx_mask | FLEXCAN_IFLAG_MB(priv->tx_mb_idx);
-+	priv->write(upper_32_bits(reg_imask), &regs->imask2);
-+	priv->write(lower_32_bits(reg_imask), &regs->imask1);
- 	enable_irq(dev->irq);
- 
- 	/* print chip status */
-@@ -1330,19 +1331,14 @@ static int flexcan_open(struct net_devic
- 	priv->offload.mailbox_read = flexcan_mailbox_read;
- 
- 	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
--		u64 imask;
--
- 		priv->offload.mb_first = FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST;
- 		priv->offload.mb_last = priv->mb_count - 2;
- 
--		imask = GENMASK_ULL(priv->offload.mb_last,
--				    priv->offload.mb_first);
--		priv->rx_mask1 = imask;
--		priv->rx_mask2 = imask >> 32;
--
-+		priv->rx_mask = GENMASK_ULL(priv->offload.mb_last,
-+					    priv->offload.mb_first);
- 		err = can_rx_offload_add_timestamp(dev, &priv->offload);
- 	} else {
--		priv->rx_mask1 = FLEXCAN_IFLAG_RX_FIFO_OVERFLOW |
-+		priv->rx_mask = FLEXCAN_IFLAG_RX_FIFO_OVERFLOW |
- 			FLEXCAN_IFLAG_RX_FIFO_AVAILABLE;
- 		err = can_rx_offload_add_fifo(dev, &priv->offload,
- 					      FLEXCAN_NAPI_WEIGHT);
diff --git a/target/linux/layerscape/patches-5.4/802-can-0014-can-flexcan-introduce-struct-flexcan_priv-tx_mask-an.patch b/target/linux/layerscape/patches-5.4/802-can-0014-can-flexcan-introduce-struct-flexcan_priv-tx_mask-an.patch
deleted file mode 100644
index 336fcd684d..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0014-can-flexcan-introduce-struct-flexcan_priv-tx_mask-an.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 1693e5693b77f0d172aac8adcfaa4888d64f8996 Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Fri, 1 Mar 2019 13:54:19 +0100
-Subject: [PATCH] can: flexcan: introduce struct flexcan_priv::tx_mask and make
- use of it
-
-The current driver uses FLEXCAN_IFLAG2_MB() to generate the mask to check for
-the TX complete interrupt. This works well, as the driver will always use the
-last mailbox for TX, which falls into the iflag2 register.
-
-To support CANFD the payload size has to increase to 64 bytes and the
-number of mailboxes will decrease so much that the TX mailbox will be
-handled in the iflag1 register.
-
-This patch introduces a tx_mask in the struct flexcan_priv (similar to rx_mask)
-and makes use of it. The actual support to handle the TX mailbox in iflag1 will
-be added in the next patches.
-
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 14 ++++++++------
- 1 file changed, 8 insertions(+), 6 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -143,7 +143,6 @@
- #define FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP	0
- #define FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST	(FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP + 1)
- #define FLEXCAN_IFLAG_MB(x)		BIT_ULL(x)
--#define FLEXCAN_IFLAG2_MB(x)		BIT((x) & 0x1f)
- #define FLEXCAN_IFLAG_RX_FIFO_OVERFLOW	BIT(7)
- #define FLEXCAN_IFLAG_RX_FIFO_WARN	BIT(6)
- #define FLEXCAN_IFLAG_RX_FIFO_AVAILABLE	BIT(5)
-@@ -279,6 +278,7 @@ struct flexcan_priv {
- 	u8 clk_src;	/* clock source of CAN Protocol Engine */
- 
- 	u64 rx_mask;
-+	u64 tx_mask;
- 	u32 reg_ctrl_default;
- 
- 	struct clk *clk_ipg;
-@@ -898,7 +898,8 @@ static irqreturn_t flexcan_irq(int irq,
- 	struct flexcan_priv *priv = netdev_priv(dev);
- 	struct flexcan_regs __iomem *regs = priv->regs;
- 	irqreturn_t handled = IRQ_NONE;
--	u32 reg_iflag2, reg_esr;
-+	u64 reg_iflag_tx;
-+	u32 reg_esr;
- 	enum can_state last_state = priv->can.state;
- 
- 	/* reception interrupt */
-@@ -932,10 +933,10 @@ static irqreturn_t flexcan_irq(int irq,
- 		}
- 	}
- 
--	reg_iflag2 = priv->read(&regs->iflag2);
-+	reg_iflag_tx = (u64)priv->read(&regs->iflag2) << 32;
- 
- 	/* transmission complete interrupt */
--	if (reg_iflag2 & FLEXCAN_IFLAG2_MB(priv->tx_mb_idx)) {
-+	if (reg_iflag_tx & priv->tx_mask) {
- 		u32 reg_ctrl = priv->read(&priv->tx_mb->can_ctrl);
- 
- 		handled = IRQ_HANDLED;
-@@ -947,7 +948,7 @@ static irqreturn_t flexcan_irq(int irq,
- 		/* after sending a RTR frame MB is in RX mode */
- 		priv->write(FLEXCAN_MB_CODE_TX_INACTIVE,
- 			    &priv->tx_mb->can_ctrl);
--		priv->write(FLEXCAN_IFLAG2_MB(priv->tx_mb_idx), &regs->iflag2);
-+		priv->write(priv->tx_mask >> 32, &regs->iflag2);
- 		netif_wake_queue(dev);
- 	}
- 
-@@ -1232,7 +1233,7 @@ static int flexcan_chip_start(struct net
- 	/* enable interrupts atomically */
- 	disable_irq(dev->irq);
- 	priv->write(priv->reg_ctrl_default, &regs->ctrl);
--	reg_imask = priv->rx_mask | FLEXCAN_IFLAG_MB(priv->tx_mb_idx);
-+	reg_imask = priv->rx_mask | priv->tx_mask;
- 	priv->write(upper_32_bits(reg_imask), &regs->imask2);
- 	priv->write(lower_32_bits(reg_imask), &regs->imask1);
- 	enable_irq(dev->irq);
-@@ -1327,6 +1328,7 @@ static int flexcan_open(struct net_devic
- 			flexcan_get_mb(priv, FLEXCAN_TX_MB_RESERVED_OFF_FIFO);
- 	priv->tx_mb_idx = priv->mb_count - 1;
- 	priv->tx_mb = flexcan_get_mb(priv, priv->tx_mb_idx);
-+	priv->tx_mask = FLEXCAN_IFLAG_MB(priv->tx_mb_idx);
- 
- 	priv->offload.mailbox_read = flexcan_mailbox_read;
- 
diff --git a/target/linux/layerscape/patches-5.4/802-can-0015-can-flexcan-flexcan_read_reg_iflag_rx-optimize-readi.patch b/target/linux/layerscape/patches-5.4/802-can-0015-can-flexcan-flexcan_read_reg_iflag_rx-optimize-readi.patch
deleted file mode 100644
index c7e5e4ec4f..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0015-can-flexcan-flexcan_read_reg_iflag_rx-optimize-readi.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 74920ba156136a58dd3411c02d429d4f31497dc0 Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Fri, 1 Mar 2019 15:38:05 +0100
-Subject: [PATCH] can: flexcan: flexcan_read_reg_iflag_rx(): optimize reading
-
-The flexcan IP core has up to 64 mailboxes, each one has a corresponding
-interrupt bit in the iflag1 or iflag2 registers and a mask bit in the
-imask1 or imask2 registers.
-
-In the timestamp (i.e. non FIFO) mode the driver needs to mask all non RX
-interrupt sources, it uses the precomputed value rx_mask of struct flexcan_priv
-for this.
-
-In certain use cases, for example the CANFD mode, the contents of the iflag2
-register is completely masked.
-
-This patch optimizes the flexcan_read_reg_iflag_rx() function by not reading
-the iflag1 or iflag2 register if the contents is masked.
-
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 28 +++++++++++++++++-----------
- 1 file changed, 17 insertions(+), 11 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -786,6 +786,23 @@ static void flexcan_irq_state(struct net
- 		dev->stats.rx_fifo_errors++;
- }
- 
-+static inline u64 flexcan_read64_mask(struct flexcan_priv *priv, void __iomem *addr, u64 mask)
-+{
-+	u64 reg = 0;
-+
-+	if (upper_32_bits(mask))
-+		reg = (u64)priv->read(addr - 4) << 32;
-+	if (lower_32_bits(mask))
-+		reg |= priv->read(addr);
-+
-+	return reg & mask;
-+}
-+
-+static inline u64 flexcan_read_reg_iflag_rx(struct flexcan_priv *priv)
-+{
-+	return flexcan_read64_mask(priv, &priv->regs->iflag1, priv->rx_mask);
-+}
-+
- static inline struct flexcan_priv *rx_offload_to_priv(struct can_rx_offload *offload)
- {
- 	return container_of(offload, struct flexcan_priv, offload);
-@@ -880,17 +897,6 @@ static struct sk_buff *flexcan_mailbox_r
- 	return skb;
- }
- 
--static inline u64 flexcan_read_reg_iflag_rx(struct flexcan_priv *priv)
--{
--	struct flexcan_regs __iomem *regs = priv->regs;
--	u64 iflag;
--
--	iflag = (u64)priv->read(&regs->iflag2) << 32 |
--		priv->read(&regs->iflag1);
--
--	return iflag & priv->rx_mask;
--}
--
- static irqreturn_t flexcan_irq(int irq, void *dev_id)
- {
- 	struct net_device *dev = dev_id;
diff --git a/target/linux/layerscape/patches-5.4/802-can-0016-can-flexcan-flexcan_irq-add-support-for-TX-mailbox-i.patch b/target/linux/layerscape/patches-5.4/802-can-0016-can-flexcan-flexcan_irq-add-support-for-TX-mailbox-i.patch
deleted file mode 100644
index f67ae18763..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0016-can-flexcan-flexcan_irq-add-support-for-TX-mailbox-i.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 57d3edbdcfee9b677452744bba5c4f08b476872a Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Fri, 1 Mar 2019 15:38:05 +0100
-Subject: [PATCH] can: flexcan: flexcan_irq(): add support for TX mailbox in
- iflag1
-
-The flexcan IP core has up to 64 mailboxes, each one has a corresponding
-interrupt bit in the iflag1 or iflag2 registers and a mask bit in the
-imask1 or imask2 registers.
-
-The driver will always use the last mailbox for TX, which falls into the iflag2
-register.
-
-To support CANFD the payload size has to increase to 64 bytes and the number of
-mailboxes will decrease so much that the TX mailbox will be handled in the
-iflag1 register.
-
-This patch add support to handle the TX mailbox independent whether it's
-in iflag1 or iflag2 by introducing th flexcan_read_reg_iflag_tx()
-function, similar to flexcan_read_reg_iflag_rx(), for the read path.
-
-For the write path the function flexcan_write64() is added.
-
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 17 +++++++++++++++--
- 1 file changed, 15 insertions(+), 2 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -798,11 +798,24 @@ static inline u64 flexcan_read64_mask(st
- 	return reg & mask;
- }
- 
-+static inline void flexcan_write64(struct flexcan_priv *priv, u64 val, void __iomem *addr)
-+{
-+	if (upper_32_bits(val))
-+		priv->write(upper_32_bits(val), addr - 4);
-+	if (lower_32_bits(val))
-+		priv->write(lower_32_bits(val), addr);
-+}
-+
- static inline u64 flexcan_read_reg_iflag_rx(struct flexcan_priv *priv)
- {
- 	return flexcan_read64_mask(priv, &priv->regs->iflag1, priv->rx_mask);
- }
- 
-+static inline u64 flexcan_read_reg_iflag_tx(struct flexcan_priv *priv)
-+{
-+	return flexcan_read64_mask(priv, &priv->regs->iflag1, priv->tx_mask);
-+}
-+
- static inline struct flexcan_priv *rx_offload_to_priv(struct can_rx_offload *offload)
- {
- 	return container_of(offload, struct flexcan_priv, offload);
-@@ -939,7 +952,7 @@ static irqreturn_t flexcan_irq(int irq,
- 		}
- 	}
- 
--	reg_iflag_tx = (u64)priv->read(&regs->iflag2) << 32;
-+	reg_iflag_tx = flexcan_read_reg_iflag_tx(priv);
- 
- 	/* transmission complete interrupt */
- 	if (reg_iflag_tx & priv->tx_mask) {
-@@ -954,7 +967,7 @@ static irqreturn_t flexcan_irq(int irq,
- 		/* after sending a RTR frame MB is in RX mode */
- 		priv->write(FLEXCAN_MB_CODE_TX_INACTIVE,
- 			    &priv->tx_mb->can_ctrl);
--		priv->write(priv->tx_mask >> 32, &regs->iflag2);
-+		flexcan_write64(priv, priv->tx_mask, &regs->iflag1);
- 		netif_wake_queue(dev);
- 	}
- 
diff --git a/target/linux/layerscape/patches-5.4/802-can-0017-can-flexcan-flexcan_mailbox_read-make-use-of-flexcan.patch b/target/linux/layerscape/patches-5.4/802-can-0017-can-flexcan-flexcan_mailbox_read-make-use-of-flexcan.patch
deleted file mode 100644
index b94992fac5..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0017-can-flexcan-flexcan_mailbox_read-make-use-of-flexcan.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 6340760d0671e92b15ff92b7eda41bbdd9702437 Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Fri, 1 Mar 2019 16:27:59 +0100
-Subject: [PATCH] can: flexcan: flexcan_mailbox_read() make use of
- flexcan_write64() to mark the mailbox as read
-
-In the previous patch the function flexcan_write64() was introduced.
-
-This patch replaces the open coded variant in flexcan_mailbox_read()
-that marks a mailbox as read, by a single call to flexcan_write64().
-
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 11 +++--------
- 1 file changed, 3 insertions(+), 8 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -891,15 +891,10 @@ static struct sk_buff *flexcan_mailbox_r
- 	}
- 
-  mark_as_read:
--	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
--		/* Clear IRQ */
--		if (n < 32)
--			priv->write(BIT(n), &regs->iflag1);
--		else
--			priv->write(BIT(n - 32), &regs->iflag2);
--	} else {
-+	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
-+		flexcan_write64(priv, FLEXCAN_IFLAG_MB(n), &regs->iflag1);
-+	else
- 		priv->write(FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, &regs->iflag1);
--	}
- 
- 	/* Read the Free Running Timer. It is optional but recommended
- 	 * to unlock Mailbox as soon as possible and make it available
diff --git a/target/linux/layerscape/patches-5.4/802-can-0018-can-flexcan-use-struct-canfd_frame-for-CAN-classic-f.patch b/target/linux/layerscape/patches-5.4/802-can-0018-can-flexcan-use-struct-canfd_frame-for-CAN-classic-f.patch
deleted file mode 100644
index 1e2a89d913..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0018-can-flexcan-use-struct-canfd_frame-for-CAN-classic-f.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 03374d551c7fbb1b1ecc115df4f374bc5027b1f9 Mon Sep 17 00:00:00 2001
-From: Joakim Zhang <qiangqing.zhang@nxp.com>
-Date: Fri, 12 Jul 2019 08:02:41 +0000
-Subject: [PATCH] can: flexcan: use struct canfd_frame for CAN classic frame
-
-This patch prepares for CAN FD mode, using struct canfd_frame can both
-for classic format frame and fd format frame.
-
-Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c    | 34 +++++++++++++++++-----------------
- drivers/net/can/dev/rx-offload.c |  4 ++--
- 2 files changed, 19 insertions(+), 19 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -635,10 +635,10 @@ static int flexcan_get_berr_counter(cons
- static netdev_tx_t flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev)
- {
- 	const struct flexcan_priv *priv = netdev_priv(dev);
--	struct can_frame *cf = (struct can_frame *)skb->data;
-+	struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
- 	u32 can_id;
- 	u32 data;
--	u32 ctrl = FLEXCAN_MB_CODE_TX_DATA | (cf->can_dlc << 16);
-+	u32 ctrl = FLEXCAN_MB_CODE_TX_DATA | (cfd->len << 16);
- 	int i;
- 
- 	if (can_dropped_invalid_skb(dev, skb))
-@@ -646,18 +646,18 @@ static netdev_tx_t flexcan_start_xmit(st
- 
- 	netif_stop_queue(dev);
- 
--	if (cf->can_id & CAN_EFF_FLAG) {
--		can_id = cf->can_id & CAN_EFF_MASK;
-+	if (cfd->can_id & CAN_EFF_FLAG) {
-+		can_id = cfd->can_id & CAN_EFF_MASK;
- 		ctrl |= FLEXCAN_MB_CNT_IDE | FLEXCAN_MB_CNT_SRR;
- 	} else {
--		can_id = (cf->can_id & CAN_SFF_MASK) << 18;
-+		can_id = (cfd->can_id & CAN_SFF_MASK) << 18;
- 	}
- 
--	if (cf->can_id & CAN_RTR_FLAG)
-+	if (cfd->can_id & CAN_RTR_FLAG)
- 		ctrl |= FLEXCAN_MB_CNT_RTR;
- 
--	for (i = 0; i < cf->can_dlc; i += sizeof(u32)) {
--		data = be32_to_cpup((__be32 *)&cf->data[i]);
-+	for (i = 0; i < cfd->len; i += sizeof(u32)) {
-+		data = be32_to_cpup((__be32 *)&cfd->data[i]);
- 		priv->write(data, &priv->tx_mb->data[i / sizeof(u32)]);
- 	}
- 
-@@ -829,7 +829,7 @@ static struct sk_buff *flexcan_mailbox_r
- 	struct flexcan_regs __iomem *regs = priv->regs;
- 	struct flexcan_mb __iomem *mb;
- 	struct sk_buff *skb;
--	struct can_frame *cf;
-+	struct canfd_frame *cfd;
- 	u32 reg_ctrl, reg_id, reg_iflag1;
- 	int i;
- 
-@@ -866,8 +866,8 @@ static struct sk_buff *flexcan_mailbox_r
- 		reg_ctrl = priv->read(&mb->can_ctrl);
- 	}
- 
--	skb = alloc_can_skb(offload->dev, &cf);
--	if (!skb) {
-+	skb = alloc_can_skb(offload->dev, (struct can_frame **)&cfd);
-+	if (unlikely(!skb)) {
- 		skb = ERR_PTR(-ENOMEM);
- 		goto mark_as_read;
- 	}
-@@ -877,17 +877,17 @@ static struct sk_buff *flexcan_mailbox_r
- 
- 	reg_id = priv->read(&mb->can_id);
- 	if (reg_ctrl & FLEXCAN_MB_CNT_IDE)
--		cf->can_id = ((reg_id >> 0) & CAN_EFF_MASK) | CAN_EFF_FLAG;
-+		cfd->can_id = ((reg_id >> 0) & CAN_EFF_MASK) | CAN_EFF_FLAG;
- 	else
--		cf->can_id = (reg_id >> 18) & CAN_SFF_MASK;
-+		cfd->can_id = (reg_id >> 18) & CAN_SFF_MASK;
- 
- 	if (reg_ctrl & FLEXCAN_MB_CNT_RTR)
--		cf->can_id |= CAN_RTR_FLAG;
--	cf->can_dlc = get_can_dlc((reg_ctrl >> 16) & 0xf);
-+		cfd->can_id |= CAN_RTR_FLAG;
-+	cfd->len = get_can_dlc((reg_ctrl >> 16) & 0xf);
- 
--	for (i = 0; i < cf->can_dlc; i += sizeof(u32)) {
-+	for (i = 0; i < cfd->len; i += sizeof(u32)) {
- 		__be32 data = cpu_to_be32(priv->read(&mb->data[i / sizeof(u32)]));
--		*(__be32 *)(cf->data + i) = data;
-+		*(__be32 *)(cfd->data + i) = data;
- 	}
- 
-  mark_as_read:
---- a/drivers/net/can/dev/rx-offload.c
-+++ b/drivers/net/can/dev/rx-offload.c
-@@ -51,11 +51,11 @@ static int can_rx_offload_napi_poll(stru
- 
- 	while ((work_done < quota) &&
- 	       (skb = skb_dequeue(&offload->skb_queue))) {
--		struct can_frame *cf = (struct can_frame *)skb->data;
-+		struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
- 
- 		work_done++;
- 		stats->rx_packets++;
--		stats->rx_bytes += cf->can_dlc;
-+		stats->rx_bytes += cfd->len;
- 		netif_receive_skb(skb);
- 	}
- 
diff --git a/target/linux/layerscape/patches-5.4/802-can-0019-can-flexcan-add-CAN-FD-mode-support.patch b/target/linux/layerscape/patches-5.4/802-can-0019-can-flexcan-add-CAN-FD-mode-support.patch
deleted file mode 100644
index ee0dbd179e..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0019-can-flexcan-add-CAN-FD-mode-support.patch
+++ /dev/null
@@ -1,397 +0,0 @@
-From 2aea13a107090d05e968d7d2aa3f72380a3f1b4c Mon Sep 17 00:00:00 2001
-From: Joakim Zhang <qiangqing.zhang@nxp.com>
-Date: Fri, 12 Jul 2019 08:02:44 +0000
-Subject: [PATCH] can: flexcan: add CAN FD mode support
-
-This patch intends to add CAN FD mode support in driver, it means that
-payload size can extend up to 64 bytes.
-
-Bit timing always set in CBT register other than CTRL1 register when
-CANFD supports BRS, it will extend the range of all CAN bit timing
-variables (PRESDIV, PROPSEG, PSEG1, PSEG2 and RJW), which will improve
-the bit timing accuracy.
-
-Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 247 ++++++++++++++++++++++++++++++++++++++++------
- 1 file changed, 218 insertions(+), 29 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -52,6 +52,7 @@
- #define FLEXCAN_MCR_IRMQ		BIT(16)
- #define FLEXCAN_MCR_LPRIO_EN		BIT(13)
- #define FLEXCAN_MCR_AEN			BIT(12)
-+#define FLEXCAN_MCR_FDEN		BIT(11)
- /* MCR_MAXMB: maximum used MBs is MAXMB + 1 */
- #define FLEXCAN_MCR_MAXMB(x)		((x) & 0x7f)
- #define FLEXCAN_MCR_IDAM_A		(0x0 << 8)
-@@ -137,6 +138,26 @@
- 	 FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT | \
- 	 FLEXCAN_ESR_WAK_INT)
- 
-+/* FLEXCAN Bit Timing register (CBT) bits */
-+#define FLEXCAN_CBT_BTF			BIT(31)
-+#define FLEXCAN_CBT_EPRESDIV(x)		(((x) & 0x3ff) << 21)
-+#define FLEXCAN_CBT_ERJW(x)		(((x) & 0x0f) << 16)
-+#define FLEXCAN_CBT_EPROPSEG(x)		(((x) & 0x3f) << 10)
-+#define FLEXCAN_CBT_EPSEG1(x)		(((x) & 0x1f) << 5)
-+#define FLEXCAN_CBT_EPSEG2(x)		((x) & 0x1f)
-+
-+/* FLEXCAN FD control register (FDCTRL) bits */
-+#define FLEXCAN_FDCTRL_FDRATE		BIT(31)
-+#define FLEXCAN_FDCTRL_MBDSR1(x)	(((x) & 0x3) << 19)
-+#define FLEXCAN_FDCTRL_MBDSR0(x)	(((x) & 0x3) << 16)
-+
-+/* FLEXCAN FD Bit Timing register (FDCBT) bits */
-+#define FLEXCAN_FDCBT_FPRESDIV(x)	(((x) & 0x3ff) << 20)
-+#define FLEXCAN_FDCBT_FRJW(x)		(((x) & 0x07) << 16)
-+#define FLEXCAN_FDCBT_FPROPSEG(x)	(((x) & 0x1f) << 10)
-+#define FLEXCAN_FDCBT_FPSEG1(x)		(((x) & 0x07) << 5)
-+#define FLEXCAN_FDCBT_FPSEG2(x)		((x) & 0x07)
-+
- /* FLEXCAN interrupt flag register (IFLAG) bits */
- /* Errata ERR005829 step7: Reserve first valid MB */
- #define FLEXCAN_TX_MB_RESERVED_OFF_FIFO		8
-@@ -161,6 +182,9 @@
- #define FLEXCAN_MB_CODE_TX_DATA		(0xc << 24)
- #define FLEXCAN_MB_CODE_TX_TANSWER	(0xe << 24)
- 
-+#define FLEXCAN_MB_CNT_EDL		BIT(31)
-+#define FLEXCAN_MB_CNT_BRS		BIT(30)
-+#define FLEXCAN_MB_CNT_ESI		BIT(29)
- #define FLEXCAN_MB_CNT_SRR		BIT(22)
- #define FLEXCAN_MB_CNT_IDE		BIT(21)
- #define FLEXCAN_MB_CNT_RTR		BIT(20)
-@@ -192,6 +216,7 @@
- #define FLEXCAN_QUIRK_BROKEN_PERR_STATE	BIT(6) /* No interrupt for error passive */
- #define FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN	BIT(7) /* default to BE register access */
- #define FLEXCAN_QUIRK_SETUP_STOP_MODE		BIT(8) /* Setup stop mode to support wakeup */
-+#define FLEXCAN_QUIRK_TIMESTAMP_SUPPORT_FD	BIT(9) /* Use timestamp then support can fd mode */
- 
- /* Structure of the message buffer */
- struct flexcan_mb {
-@@ -225,7 +250,8 @@ struct flexcan_regs {
- 	u32 crcr;		/* 0x44 */
- 	u32 rxfgmask;		/* 0x48 */
- 	u32 rxfir;		/* 0x4c */
--	u32 _reserved3[12];	/* 0x50 */
-+	u32 cbt;		/* 0x50 */
-+	u32 _reserved3[11];	/* 0x54 */
- 	u8 mb[2][512];		/* 0x80 */
- 	/* FIFO-mode:
- 	 *			MB
-@@ -250,6 +276,10 @@ struct flexcan_regs {
- 	u32 rerrdr;		/* 0xaf4 */
- 	u32 rerrsynr;		/* 0xaf8 */
- 	u32 errsr;		/* 0xafc */
-+	u32 _reserved7[64];	/* 0xb00 */
-+	u32 fdctrl;		/* 0xc00 */
-+	u32 fdcbt;		/* 0xc04 */
-+	u32 fdcrc;		/* 0xc08 */
- };
- 
- struct flexcan_devtype_data {
-@@ -336,6 +366,30 @@ static const struct can_bittiming_const
- 	.brp_inc = 1,
- };
- 
-+static const struct can_bittiming_const flexcan_fd_bittiming_const = {
-+	.name = DRV_NAME,
-+	.tseg1_min = 2,
-+	.tseg1_max = 96,
-+	.tseg2_min = 2,
-+	.tseg2_max = 32,
-+	.sjw_max = 16,
-+	.brp_min = 1,
-+	.brp_max = 1024,
-+	.brp_inc = 1,
-+};
-+
-+static const struct can_bittiming_const flexcan_fd_data_bittiming_const = {
-+	.name = DRV_NAME,
-+	.tseg1_min = 2,
-+	.tseg1_max = 39,
-+	.tseg2_min = 2,
-+	.tseg2_max = 8,
-+	.sjw_max = 4,
-+	.brp_min = 1,
-+	.brp_max = 1024,
-+	.brp_inc = 1,
-+};
-+
- /* FlexCAN module is essentially modelled as a little-endian IP in most
-  * SoCs, i.e the registers as well as the message buffer areas are
-  * implemented in a little-endian fashion.
-@@ -638,7 +692,7 @@ static netdev_tx_t flexcan_start_xmit(st
- 	struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
- 	u32 can_id;
- 	u32 data;
--	u32 ctrl = FLEXCAN_MB_CODE_TX_DATA | (cfd->len << 16);
-+	u32 ctrl = FLEXCAN_MB_CODE_TX_DATA | ((can_len2dlc(cfd->len)) << 16);
- 	int i;
- 
- 	if (can_dropped_invalid_skb(dev, skb))
-@@ -656,6 +710,9 @@ static netdev_tx_t flexcan_start_xmit(st
- 	if (cfd->can_id & CAN_RTR_FLAG)
- 		ctrl |= FLEXCAN_MB_CNT_RTR;
- 
-+	if (can_is_canfd_skb(skb))
-+		ctrl |= FLEXCAN_MB_CNT_EDL;
-+
- 	for (i = 0; i < cfd->len; i += sizeof(u32)) {
- 		data = be32_to_cpup((__be32 *)&cfd->data[i]);
- 		priv->write(data, &priv->tx_mb->data[i / sizeof(u32)]);
-@@ -866,7 +923,10 @@ static struct sk_buff *flexcan_mailbox_r
- 		reg_ctrl = priv->read(&mb->can_ctrl);
- 	}
- 
--	skb = alloc_can_skb(offload->dev, (struct can_frame **)&cfd);
-+	if (reg_ctrl & FLEXCAN_MB_CNT_EDL)
-+		skb = alloc_canfd_skb(offload->dev, &cfd);
-+	else
-+		skb = alloc_can_skb(offload->dev, (struct can_frame **)&cfd);
- 	if (unlikely(!skb)) {
- 		skb = ERR_PTR(-ENOMEM);
- 		goto mark_as_read;
-@@ -881,9 +941,17 @@ static struct sk_buff *flexcan_mailbox_r
- 	else
- 		cfd->can_id = (reg_id >> 18) & CAN_SFF_MASK;
- 
--	if (reg_ctrl & FLEXCAN_MB_CNT_RTR)
--		cfd->can_id |= CAN_RTR_FLAG;
--	cfd->len = get_can_dlc((reg_ctrl >> 16) & 0xf);
-+	if (reg_ctrl & FLEXCAN_MB_CNT_EDL) {
-+		cfd->len = can_dlc2len(get_canfd_dlc((reg_ctrl >> 16) & 0xf));
-+	} else {
-+		cfd->len = get_can_dlc((reg_ctrl >> 16) & 0xf);
-+
-+		if (reg_ctrl & FLEXCAN_MB_CNT_RTR)
-+			cfd->can_id |= CAN_RTR_FLAG;
-+	}
-+
-+	if (reg_ctrl & FLEXCAN_MB_CNT_ESI)
-+		cfd->flags |= CANFD_ESI;
- 
- 	for (i = 0; i < cfd->len; i += sizeof(u32)) {
- 		__be32 data = cpu_to_be32(priv->read(&mb->data[i / sizeof(u32)]));
-@@ -1028,27 +1096,14 @@ static irqreturn_t flexcan_irq(int irq,
- 
- static void flexcan_set_bittiming(struct net_device *dev)
- {
--	const struct flexcan_priv *priv = netdev_priv(dev);
--	const struct can_bittiming *bt = &priv->can.bittiming;
-+	struct flexcan_priv *priv = netdev_priv(dev);
-+	struct can_bittiming *bt = &priv->can.bittiming;
-+	struct can_bittiming *dbt = &priv->can.data_bittiming;
- 	struct flexcan_regs __iomem *regs = priv->regs;
--	u32 reg;
-+	u32 reg, reg_cbt, reg_fdcbt;
- 
- 	reg = priv->read(&regs->ctrl);
--	reg &= ~(FLEXCAN_CTRL_PRESDIV(0xff) |
--		 FLEXCAN_CTRL_RJW(0x3) |
--		 FLEXCAN_CTRL_PSEG1(0x7) |
--		 FLEXCAN_CTRL_PSEG2(0x7) |
--		 FLEXCAN_CTRL_PROPSEG(0x7) |
--		 FLEXCAN_CTRL_LPB |
--		 FLEXCAN_CTRL_SMP |
--		 FLEXCAN_CTRL_LOM);
--
--	reg |= FLEXCAN_CTRL_PRESDIV(bt->brp - 1) |
--		FLEXCAN_CTRL_PSEG1(bt->phase_seg1 - 1) |
--		FLEXCAN_CTRL_PSEG2(bt->phase_seg2 - 1) |
--		FLEXCAN_CTRL_RJW(bt->sjw - 1) |
--		FLEXCAN_CTRL_PROPSEG(bt->prop_seg - 1);
--
-+	reg &= ~(FLEXCAN_CTRL_LPB | FLEXCAN_CTRL_SMP | FLEXCAN_CTRL_LOM);
- 	if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
- 		reg |= FLEXCAN_CTRL_LPB;
- 	if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
-@@ -1059,9 +1114,102 @@ static void flexcan_set_bittiming(struct
- 	netdev_dbg(dev, "writing ctrl=0x%08x\n", reg);
- 	priv->write(reg, &regs->ctrl);
- 
--	/* print chip status */
--	netdev_dbg(dev, "%s: mcr=0x%08x ctrl=0x%08x\n", __func__,
--		   priv->read(&regs->mcr), priv->read(&regs->ctrl));
-+	if (priv->can.ctrlmode_supported & CAN_CTRLMODE_FD) {
-+		reg_cbt = priv->read(&regs->cbt);
-+		reg_cbt &= ~(FLEXCAN_CBT_EPRESDIV(0x3ff) |
-+			     FLEXCAN_CBT_EPSEG1(0x1f) |
-+			     FLEXCAN_CBT_EPSEG2(0x1f) |
-+			     FLEXCAN_CBT_ERJW(0x1f) |
-+			     FLEXCAN_CBT_EPROPSEG(0x3f) |
-+			     FLEXCAN_CBT_BTF);
-+
-+		/* CBT[EPSEG1] is 5 bit long and CBT[EPROPSEG] is 6 bit long.
-+		 * The can_calc_bittiming tries to divide the tseg1 equally
-+		 * between phase_seg1 and prop_seg, which may not fit in CBT
-+		 * register. Therefore, if phase_seg1 is more than possible
-+		 * value, increase prop_seg and decrease phase_seg1
-+		 */
-+		if (bt->phase_seg1 > 0x20) {
-+			bt->prop_seg += (bt->phase_seg1 - 0x20);
-+			bt->phase_seg1 = 0x20;
-+		}
-+
-+		reg_cbt = FLEXCAN_CBT_EPRESDIV(bt->brp - 1) |
-+				FLEXCAN_CBT_EPSEG1(bt->phase_seg1 - 1) |
-+				FLEXCAN_CBT_EPSEG2(bt->phase_seg2 - 1) |
-+				FLEXCAN_CBT_ERJW(bt->sjw - 1) |
-+				FLEXCAN_CBT_EPROPSEG(bt->prop_seg - 1) |
-+				FLEXCAN_CBT_BTF;
-+		priv->write(reg_cbt, &regs->cbt);
-+
-+		netdev_dbg(dev, "bt: prediv %d seg1 %d seg2 %d rjw %d propseg %d\n",
-+			   bt->brp - 1, bt->phase_seg1 - 1, bt->phase_seg2 - 1,
-+			   bt->sjw - 1, bt->prop_seg - 1);
-+
-+		if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
-+			reg_fdcbt = priv->read(&regs->fdcbt);
-+			reg_fdcbt &= ~(FLEXCAN_FDCBT_FPRESDIV(0x3ff) |
-+				       FLEXCAN_FDCBT_FPSEG1(0x07) |
-+				       FLEXCAN_FDCBT_FPSEG2(0x07) |
-+				       FLEXCAN_FDCBT_FRJW(0x07) |
-+				       FLEXCAN_FDCBT_FPROPSEG(0x1f));
-+
-+			/* FDCBT[FPSEG1] is 3 bit long and FDCBT[FPROPSEG] is 5 bit long.
-+			 * The can_calc_bittiming tries to divide the tseg1 equally
-+			 * between phase_seg1 and prop_seg, which may not fit in FDCBT
-+			 * register. Therefore, if phase_seg1 is more than possible
-+			 * value, increase prop_seg and decrease phase_seg1
-+			 */
-+			if (dbt->phase_seg1 > 0x8) {
-+				dbt->prop_seg += (dbt->phase_seg1 - 0x8);
-+				dbt->phase_seg1 = 0x8;
-+			}
-+
-+			reg_fdcbt = FLEXCAN_FDCBT_FPRESDIV(dbt->brp - 1) |
-+					FLEXCAN_FDCBT_FPSEG1(dbt->phase_seg1 - 1) |
-+					FLEXCAN_FDCBT_FPSEG2(dbt->phase_seg2 - 1) |
-+					FLEXCAN_FDCBT_FRJW(dbt->sjw - 1) |
-+					FLEXCAN_FDCBT_FPROPSEG(dbt->prop_seg);
-+			priv->write(reg_fdcbt, &regs->fdcbt);
-+
-+			if (bt->brp != dbt->brp)
-+				netdev_warn(dev, "Warning!! data brp = %d and brp = %d don't match.\n"
-+					    "flexcan may not work. consider using different bitrate or data bitrate\n",
-+					    dbt->brp, bt->brp);
-+
-+			netdev_dbg(dev, "fdbt: prediv %d seg1 %d seg2 %d rjw %d propseg %d\n",
-+				   dbt->brp - 1, dbt->phase_seg1 - 1, dbt->phase_seg2 - 1,
-+				   dbt->sjw - 1, dbt->prop_seg);
-+
-+			netdev_dbg(dev, "%s: mcr=0x%08x ctrl=0x%08x cbt=0x%08x fdcbt=0x%08x\n",
-+				   __func__, priv->read(&regs->mcr),
-+				   priv->read(&regs->ctrl),
-+				   priv->read(&regs->cbt),
-+				   priv->read(&regs->fdcbt));
-+		}
-+	} else {
-+		reg = priv->read(&regs->ctrl);
-+		reg &= ~(FLEXCAN_CTRL_PRESDIV(0xff) |
-+			 FLEXCAN_CTRL_RJW(0x3) |
-+			 FLEXCAN_CTRL_PSEG1(0x7) |
-+			 FLEXCAN_CTRL_PSEG2(0x7) |
-+			 FLEXCAN_CTRL_PROPSEG(0x7));
-+
-+		reg |= FLEXCAN_CTRL_PRESDIV(bt->brp - 1) |
-+			FLEXCAN_CTRL_PSEG1(bt->phase_seg1 - 1) |
-+			FLEXCAN_CTRL_PSEG2(bt->phase_seg2 - 1) |
-+			FLEXCAN_CTRL_RJW(bt->sjw - 1) |
-+			FLEXCAN_CTRL_PROPSEG(bt->prop_seg - 1);
-+		priv->write(reg, &regs->ctrl);
-+
-+		netdev_dbg(dev, "bt: prediv %d seg1 %d seg2 %d rjw %d propseg %d\n",
-+			   bt->brp - 1, bt->phase_seg1 - 1, bt->phase_seg2 - 1,
-+			   bt->sjw - 1, bt->prop_seg - 1);
-+
-+		/* print chip status */
-+		netdev_dbg(dev, "%s: mcr=0x%08x ctrl=0x%08x\n", __func__,
-+			   priv->read(&regs->mcr), priv->read(&regs->ctrl));
-+	}
- }
- 
- /* flexcan_chip_start
-@@ -1073,7 +1221,7 @@ static int flexcan_chip_start(struct net
- {
- 	struct flexcan_priv *priv = netdev_priv(dev);
- 	struct flexcan_regs __iomem *regs = priv->regs;
--	u32 reg_mcr, reg_ctrl, reg_ctrl2, reg_mecr;
-+	u32 reg_mcr, reg_ctrl, reg_ctrl2, reg_mecr, reg_fdctrl;
- 	u64 reg_imask;
- 	int err, i;
- 	struct flexcan_mb __iomem *mb;
-@@ -1172,6 +1320,26 @@ static int flexcan_chip_start(struct net
- 	netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
- 	priv->write(reg_ctrl, &regs->ctrl);
- 
-+	/* FDCTRL */
-+	if (priv->can.ctrlmode_supported & CAN_CTRLMODE_FD) {
-+		reg_fdctrl = priv->read(&regs->fdctrl) & ~FLEXCAN_FDCTRL_FDRATE;
-+		reg_fdctrl &= ~(FLEXCAN_FDCTRL_MBDSR1(0x3) | FLEXCAN_FDCTRL_MBDSR0(0x3));
-+		reg_mcr = priv->read(&regs->mcr) & ~FLEXCAN_MCR_FDEN;
-+
-+		/* support BRS when set CAN FD mode
-+		 * 64 bytes payload per MB and 7 MBs per RAM block by default
-+		 * enable CAN FD mode
-+		 */
-+		if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
-+			reg_fdctrl |= FLEXCAN_FDCTRL_FDRATE;
-+			reg_fdctrl |= FLEXCAN_FDCTRL_MBDSR1(0x3) | FLEXCAN_FDCTRL_MBDSR0(0x3);
-+			reg_mcr |= FLEXCAN_MCR_FDEN;
-+		}
-+
-+		priv->write(reg_fdctrl, &regs->fdctrl);
-+		priv->write(reg_mcr, &regs->mcr);
-+	}
-+
- 	if ((priv->devtype_data->quirks & FLEXCAN_QUIRK_ENABLE_EACEN_RRS)) {
- 		reg_ctrl2 = priv->read(&regs->ctrl2);
- 		reg_ctrl2 |= FLEXCAN_CTRL2_EACEN | FLEXCAN_CTRL2_RRS;
-@@ -1312,6 +1480,12 @@ static int flexcan_open(struct net_devic
- 	struct flexcan_priv *priv = netdev_priv(dev);
- 	int err;
- 
-+	if ((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) &&
-+	    (priv->can.ctrlmode & CAN_CTRLMODE_FD)) {
-+		netdev_err(dev, "three samples mode and fd mode can't be used together\n");
-+		return -EINVAL;
-+	}
-+
- 	err = pm_runtime_get_sync(priv->dev);
- 	if (err < 0) {
- 		pm_runtime_put_noidle(priv->dev);
-@@ -1330,7 +1504,10 @@ static int flexcan_open(struct net_devic
- 	if (err)
- 		goto out_transceiver_disable;
- 
--	priv->mb_size = sizeof(struct flexcan_mb) + CAN_MAX_DLEN;
-+	if (priv->can.ctrlmode & CAN_CTRLMODE_FD)
-+		priv->mb_size = sizeof(struct flexcan_mb) + CANFD_MAX_DLEN;
-+	else
-+		priv->mb_size = sizeof(struct flexcan_mb) + CAN_MAX_DLEN;
- 	priv->mb_count = (sizeof(priv->regs->mb[0]) / priv->mb_size) +
- 			 (sizeof(priv->regs->mb[1]) / priv->mb_size);
- 
-@@ -1682,6 +1859,18 @@ static int flexcan_probe(struct platform
- 	priv->devtype_data = devtype_data;
- 	priv->reg_xceiver = reg_xceiver;
- 
-+	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_TIMESTAMP_SUPPORT_FD) {
-+		if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
-+			priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD;
-+			priv->can.bittiming_const = &flexcan_fd_bittiming_const;
-+			priv->can.data_bittiming_const = &flexcan_fd_data_bittiming_const;
-+		} else {
-+			dev_err(&pdev->dev, "can fd mode can't work on fifo mode\n");
-+			err = -EINVAL;
-+			goto failed_register;
-+		}
-+	}
-+
- 	pm_runtime_get_noresume(&pdev->dev);
- 	pm_runtime_set_active(&pdev->dev);
- 	pm_runtime_enable(&pdev->dev);
diff --git a/target/linux/layerscape/patches-5.4/802-can-0020-can-flexcan-add-CAN-FD-BRS-support.patch b/target/linux/layerscape/patches-5.4/802-can-0020-can-flexcan-add-CAN-FD-BRS-support.patch
deleted file mode 100644
index 28e58ade3f..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0020-can-flexcan-add-CAN-FD-BRS-support.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 4c26434ac773e37f30ee5a8fa6f7275fe7dabac2 Mon Sep 17 00:00:00 2001
-From: Joakim Zhang <qiangqing.zhang@nxp.com>
-Date: Fri, 12 Jul 2019 08:02:47 +0000
-Subject: [PATCH] can: flexcan: add CAN FD BRS support
-
-This patch adds CAN FD BitRate Switch (BRS) support to driver.
-
-Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 9 ++++++++-
- 1 file changed, 8 insertions(+), 1 deletion(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -710,9 +710,13 @@ static netdev_tx_t flexcan_start_xmit(st
- 	if (cfd->can_id & CAN_RTR_FLAG)
- 		ctrl |= FLEXCAN_MB_CNT_RTR;
- 
--	if (can_is_canfd_skb(skb))
-+	if (can_is_canfd_skb(skb)) {
- 		ctrl |= FLEXCAN_MB_CNT_EDL;
- 
-+		if (cfd->flags & CANFD_BRS)
-+			ctrl |= FLEXCAN_MB_CNT_BRS;
-+	}
-+
- 	for (i = 0; i < cfd->len; i += sizeof(u32)) {
- 		data = be32_to_cpup((__be32 *)&cfd->data[i]);
- 		priv->write(data, &priv->tx_mb->data[i / sizeof(u32)]);
-@@ -943,6 +947,9 @@ static struct sk_buff *flexcan_mailbox_r
- 
- 	if (reg_ctrl & FLEXCAN_MB_CNT_EDL) {
- 		cfd->len = can_dlc2len(get_canfd_dlc((reg_ctrl >> 16) & 0xf));
-+
-+		if (reg_ctrl & FLEXCAN_MB_CNT_BRS)
-+			cfd->flags |= CANFD_BRS;
- 	} else {
- 		cfd->len = get_can_dlc((reg_ctrl >> 16) & 0xf);
- 
diff --git a/target/linux/layerscape/patches-5.4/802-can-0021-can-flexcan-add-ISO-CAN-FD-feature-support.patch b/target/linux/layerscape/patches-5.4/802-can-0021-can-flexcan-add-ISO-CAN-FD-feature-support.patch
deleted file mode 100644
index 33459923fa..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0021-can-flexcan-add-ISO-CAN-FD-feature-support.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 094a648bc2217a9624f35224059c3eac86196143 Mon Sep 17 00:00:00 2001
-From: Joakim Zhang <qiangqing.zhang@nxp.com>
-Date: Fri, 12 Jul 2019 08:02:51 +0000
-Subject: [PATCH] can: flexcan: add ISO CAN FD feature support
-
-ISO CAN FD is introduced to increase the failture detection capability
-than non-ISO CAN FD. The non-ISO CAN FD is still supported by FlexCAN so
-that it can be used mainly during an intermediate phase, for evaluation
-and development purposes.
-
-Therefore, it is strongly recommended to configure FlexCAN to the ISO
-CAN FD protocol by setting the ISOCANFDEN field in the CTRL2 register.
-
-NOTE: If you only set "fd on", driver will use ISO FD mode by default.
-You should set "fd-non-iso on" after setting "fd on" if you want to use
-NON ISO FD mode.
-
-Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -92,6 +92,7 @@
- #define FLEXCAN_CTRL2_MRP		BIT(18)
- #define FLEXCAN_CTRL2_RRS		BIT(17)
- #define FLEXCAN_CTRL2_EACEN		BIT(16)
-+#define FLEXCAN_CTRL2_ISOCANFDEN	BIT(12)
- 
- /* FLEXCAN memory error control register (MECR) bits */
- #define FLEXCAN_MECR_ECRWRDIS		BIT(31)
-@@ -1332,6 +1333,7 @@ static int flexcan_chip_start(struct net
- 		reg_fdctrl = priv->read(&regs->fdctrl) & ~FLEXCAN_FDCTRL_FDRATE;
- 		reg_fdctrl &= ~(FLEXCAN_FDCTRL_MBDSR1(0x3) | FLEXCAN_FDCTRL_MBDSR0(0x3));
- 		reg_mcr = priv->read(&regs->mcr) & ~FLEXCAN_MCR_FDEN;
-+		reg_ctrl2 = priv->read(&regs->ctrl2) & ~FLEXCAN_CTRL2_ISOCANFDEN;
- 
- 		/* support BRS when set CAN FD mode
- 		 * 64 bytes payload per MB and 7 MBs per RAM block by default
-@@ -1341,10 +1343,14 @@ static int flexcan_chip_start(struct net
- 			reg_fdctrl |= FLEXCAN_FDCTRL_FDRATE;
- 			reg_fdctrl |= FLEXCAN_FDCTRL_MBDSR1(0x3) | FLEXCAN_FDCTRL_MBDSR0(0x3);
- 			reg_mcr |= FLEXCAN_MCR_FDEN;
-+
-+			if (!(priv->can.ctrlmode & CAN_CTRLMODE_FD_NON_ISO))
-+				reg_ctrl2 |= FLEXCAN_CTRL2_ISOCANFDEN;
- 		}
- 
- 		priv->write(reg_fdctrl, &regs->fdctrl);
- 		priv->write(reg_mcr, &regs->mcr);
-+		priv->write(reg_ctrl2, &regs->ctrl2);
- 	}
- 
- 	if ((priv->devtype_data->quirks & FLEXCAN_QUIRK_ENABLE_EACEN_RRS)) {
-@@ -1868,7 +1874,7 @@ static int flexcan_probe(struct platform
- 
- 	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_TIMESTAMP_SUPPORT_FD) {
- 		if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
--			priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD;
-+			priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD | CAN_CTRLMODE_FD_NON_ISO;
- 			priv->can.bittiming_const = &flexcan_fd_bittiming_const;
- 			priv->can.data_bittiming_const = &flexcan_fd_data_bittiming_const;
- 		} else {
diff --git a/target/linux/layerscape/patches-5.4/802-can-0022-can-flexcan-add-Transceiver-Delay-Compensation-suopp.patch b/target/linux/layerscape/patches-5.4/802-can-0022-can-flexcan-add-Transceiver-Delay-Compensation-suopp.patch
deleted file mode 100644
index 26dbb02c79..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0022-can-flexcan-add-Transceiver-Delay-Compensation-suopp.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 7b294e0cd2f7fbfb548a17b8d68d161da19e6592 Mon Sep 17 00:00:00 2001
-From: Joakim Zhang <qiangqing.zhang@nxp.com>
-Date: Fri, 12 Jul 2019 08:02:56 +0000
-Subject: [PATCH] can: flexcan: add Transceiver Delay Compensation suopport
-
-The CAN FD protocol allows the transmission and reception of data at a higher
-bit rate than the nominal rate used in the arbitration phase when the message's
-BRS bit is set.
-
-The TDC mechanism is effective only during the data phase of FD frames
-having BRS bit set. It has no effect either on non-FD frames, or on FD
-frames transmitted at normal bit rate.
-
-Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 19 ++++++++++++++++++-
- 1 file changed, 18 insertions(+), 1 deletion(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -149,8 +149,11 @@
- 
- /* FLEXCAN FD control register (FDCTRL) bits */
- #define FLEXCAN_FDCTRL_FDRATE		BIT(31)
-+#define FLEXCAN_FDCTRL_TDCEN		BIT(15)
-+#define FLEXCAN_FDCTRL_TDCFAIL		BIT(14)
- #define FLEXCAN_FDCTRL_MBDSR1(x)	(((x) & 0x3) << 19)
- #define FLEXCAN_FDCTRL_MBDSR0(x)	(((x) & 0x3) << 16)
-+#define FLEXCAN_FDCTRL_TDCOFF(x)	(((x) & 0x1f) << 8)
- 
- /* FLEXCAN FD Bit Timing register (FDCBT) bits */
- #define FLEXCAN_FDCBT_FPRESDIV(x)	(((x) & 0x3ff) << 20)
-@@ -1108,7 +1111,7 @@ static void flexcan_set_bittiming(struct
- 	struct can_bittiming *bt = &priv->can.bittiming;
- 	struct can_bittiming *dbt = &priv->can.data_bittiming;
- 	struct flexcan_regs __iomem *regs = priv->regs;
--	u32 reg, reg_cbt, reg_fdcbt;
-+	u32 reg, reg_cbt, reg_fdcbt, reg_fdctrl;
- 
- 	reg = priv->read(&regs->ctrl);
- 	reg &= ~(FLEXCAN_CTRL_LPB | FLEXCAN_CTRL_SMP | FLEXCAN_CTRL_LOM);
-@@ -1180,6 +1183,19 @@ static void flexcan_set_bittiming(struct
- 					FLEXCAN_FDCBT_FPROPSEG(dbt->prop_seg);
- 			priv->write(reg_fdcbt, &regs->fdcbt);
- 
-+			/* enable transceiver delay compensation(TDC) for fd frame.
-+			 * TDC must be disabled when Loop Back mode is enabled.
-+			 */
-+			reg_fdctrl = priv->read(&regs->fdctrl);
-+			if (!(reg & FLEXCAN_CTRL_LPB)) {
-+				reg_fdctrl |= FLEXCAN_FDCTRL_TDCEN;
-+				reg_fdctrl &= ~FLEXCAN_FDCTRL_TDCOFF(0x1f);
-+				/* for the TDC to work reliably, the offset has to use optimal settings */
-+				reg_fdctrl |= FLEXCAN_FDCTRL_TDCOFF(((dbt->phase_seg1 - 1) + dbt->prop_seg + 2) *
-+								    ((dbt->brp -1) + 1));
-+			}
-+			priv->write(reg_fdctrl, &regs->fdctrl);
-+
- 			if (bt->brp != dbt->brp)
- 				netdev_warn(dev, "Warning!! data brp = %d and brp = %d don't match.\n"
- 					    "flexcan may not work. consider using different bitrate or data bitrate\n",
-@@ -1331,6 +1347,7 @@ static int flexcan_chip_start(struct net
- 	/* FDCTRL */
- 	if (priv->can.ctrlmode_supported & CAN_CTRLMODE_FD) {
- 		reg_fdctrl = priv->read(&regs->fdctrl) & ~FLEXCAN_FDCTRL_FDRATE;
-+		reg_fdctrl &= ~FLEXCAN_FDCTRL_TDCEN;
- 		reg_fdctrl &= ~(FLEXCAN_FDCTRL_MBDSR1(0x3) | FLEXCAN_FDCTRL_MBDSR0(0x3));
- 		reg_mcr = priv->read(&regs->mcr) & ~FLEXCAN_MCR_FDEN;
- 		reg_ctrl2 = priv->read(&regs->ctrl2) & ~FLEXCAN_CTRL2_ISOCANFDEN;
diff --git a/target/linux/layerscape/patches-5.4/802-can-0023-can-flexcan-add-imx8qm-support.patch b/target/linux/layerscape/patches-5.4/802-can-0023-can-flexcan-add-imx8qm-support.patch
deleted file mode 100644
index 16a224faf0..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0023-can-flexcan-add-imx8qm-support.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 7ff112c7b144fb084f28f944d7021cd04acabecd Mon Sep 17 00:00:00 2001
-From: Joakim Zhang <qiangqing.zhang@nxp.com>
-Date: Fri, 12 Jul 2019 08:02:59 +0000
-Subject: [PATCH] can: flexcan: add imx8qm support
-
-The Flexcan on i.MX8QM supports CAN FD protocol.
-
-Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 26 +++++++++++++++++---------
- 1 file changed, 17 insertions(+), 9 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -200,15 +200,16 @@
- /* FLEXCAN hardware feature flags
-  *
-  * Below is some version info we got:
-- *    SOC   Version   IP-Version  Glitch- [TR]WRN_INT IRQ Err Memory err RTR re-
-- *                                Filter? connected?  Passive detection  ception in MB
-- *   MX25  FlexCAN2  03.00.00.00     no        no        no       no        no
-- *   MX28  FlexCAN2  03.00.04.00    yes       yes        no       no        no
-- *   MX35  FlexCAN2  03.00.00.00     no        no        no       no        no
-- *   MX53  FlexCAN2  03.00.00.00    yes        no        no       no        no
-- *   MX6s  FlexCAN3  10.00.12.00    yes       yes        no       no       yes
-- *   VF610 FlexCAN3  ?               no       yes        no      yes       yes?
-- * LS1021A FlexCAN2  03.00.04.00     no       yes        no       no       yes
-+ *    SOC   Version   IP-Version  Glitch- [TR]WRN_INT IRQ Err Memory err RTR rece-   FD Mode
-+ *                                Filter? connected?  Passive detection  ption in MB Supported?
-+ *   MX25  FlexCAN2  03.00.00.00     no        no        no       no        no           no
-+ *   MX28  FlexCAN2  03.00.04.00    yes       yes        no       no        no           no
-+ *   MX35  FlexCAN2  03.00.00.00     no        no        no       no        no           no
-+ *   MX53  FlexCAN2  03.00.00.00    yes        no        no       no        no           no
-+ *   MX6s  FlexCAN3  10.00.12.00    yes       yes        no       no       yes           no
-+ *  MX8QM  FlexCAN3  03.00.23.00    yes       yes        no       no       yes          yes
-+ *   VF610 FlexCAN3  ?               no       yes        no      yes       yes?          no
-+ * LS1021A FlexCAN2  03.00.04.00     no       yes        no       no       yes           no
-  *
-  * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
-  */
-@@ -347,6 +348,12 @@ static const struct flexcan_devtype_data
- 		FLEXCAN_QUIRK_SETUP_STOP_MODE,
- };
- 
-+static struct flexcan_devtype_data fsl_imx8qm_devtype_data = {
-+	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
-+		FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
-+		FLEXCAN_QUIRK_TIMESTAMP_SUPPORT_FD,
-+};
-+
- static const struct flexcan_devtype_data fsl_vf610_devtype_data = {
- 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
- 		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP |
-@@ -1775,6 +1782,7 @@ out_put_node:
- }
- 
- static const struct of_device_id flexcan_of_match[] = {
-+	{ .compatible = "fsl,imx8qm-flexcan", .data = &fsl_imx8qm_devtype_data, },
- 	{ .compatible = "fsl,imx6q-flexcan", .data = &fsl_imx6q_devtype_data, },
- 	{ .compatible = "fsl,imx28-flexcan", .data = &fsl_imx28_devtype_data, },
- 	{ .compatible = "fsl,imx53-flexcan", .data = &fsl_imx25_devtype_data, },
diff --git a/target/linux/layerscape/patches-5.4/802-can-0024-can-flexcan-add-lx2160ar1-support.patch b/target/linux/layerscape/patches-5.4/802-can-0024-can-flexcan-add-lx2160ar1-support.patch
deleted file mode 100644
index c4737398bf..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0024-can-flexcan-add-lx2160ar1-support.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 3e13fca177e84f94ce691fb90f36086812972eff Mon Sep 17 00:00:00 2001
-From: Pankaj Bansal <pankaj.bansal@nxp.com>
-Date: Fri, 12 Jul 2019 08:03:01 +0000
-Subject: [PATCH] can: flexcan: add lx2160ar1 support
-
-The Flexcan on lx2160ar1 supports CAN FD protocol.
-
-signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
-Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -210,6 +210,7 @@
-  *  MX8QM  FlexCAN3  03.00.23.00    yes       yes        no       no       yes          yes
-  *   VF610 FlexCAN3  ?               no       yes        no      yes       yes?          no
-  * LS1021A FlexCAN2  03.00.04.00     no       yes        no       no       yes           no
-+ * LX2160A FlexCAN3  03.00.23.00     no       yes        no       no       yes          yes
-  *
-  * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
-  */
-@@ -360,6 +361,12 @@ static const struct flexcan_devtype_data
- 		FLEXCAN_QUIRK_BROKEN_PERR_STATE,
- };
- 
-+static const struct flexcan_devtype_data fsl_lx2160a_r1_devtype_data = {
-+	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
-+		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
-+		FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_TIMESTAMP_SUPPORT_FD,
-+};
-+
- static const struct flexcan_devtype_data fsl_ls1021a_r2_devtype_data = {
- 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
- 		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP,
-@@ -1791,6 +1798,7 @@ static const struct of_device_id flexcan
- 	{ .compatible = "fsl,p1010-flexcan", .data = &fsl_p1010_devtype_data, },
- 	{ .compatible = "fsl,vf610-flexcan", .data = &fsl_vf610_devtype_data, },
- 	{ .compatible = "fsl,ls1021ar2-flexcan", .data = &fsl_ls1021a_r2_devtype_data, },
-+	{ .compatible = "fsl,lx2160ar1-flexcan", .data = &fsl_lx2160a_r1_devtype_data, },
- 	{ /* sentinel */ },
- };
- MODULE_DEVICE_TABLE(of, flexcan_of_match);
diff --git a/target/linux/layerscape/patches-5.4/802-can-0025-can-flexcan-add-LPSR-mode-support-for-i.MX7D.patch b/target/linux/layerscape/patches-5.4/802-can-0025-can-flexcan-add-LPSR-mode-support-for-i.MX7D.patch
deleted file mode 100644
index b8349e6d6d..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0025-can-flexcan-add-LPSR-mode-support-for-i.MX7D.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 211c20a459a0fd4868ed22ecfc2b2186d9df6da0 Mon Sep 17 00:00:00 2001
-From: Joakim Zhang <qiangqing.zhang@nxp.com>
-Date: Tue, 30 Jul 2019 14:43:25 +0800
-Subject: [PATCH] can: flexcan: add LPSR mode support for i.MX7D
-
-For i.MX7D LPSR mode, the controller will lost power and got the
-configuration state lost after system resume back.
-So we need to set pinctrl state again and re-start chip to do
-re-configuration after resume.
-
-For wakeup case, it should not set pinctrl to sleep state by
-pinctrl_pm_select_sleep_state.
-For interface is not up before suspend case, we don't need
-re-configure as it will be configured by user later by interface up.
-
-Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
----
- drivers/net/can/flexcan.c | 21 ++++++++++++++-------
- 1 file changed, 14 insertions(+), 7 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -26,6 +26,7 @@
- #include <linux/platform_device.h>
- #include <linux/pm_runtime.h>
- #include <linux/regulator/consumer.h>
-+#include <linux/pinctrl/consumer.h>
- #include <linux/regmap.h>
- 
- #define DRV_NAME			"flexcan"
-@@ -1971,9 +1972,7 @@ static int __maybe_unused flexcan_suspen
- 			if (err)
- 				return err;
- 		} else {
--			err = flexcan_chip_disable(priv);
--			if (err)
--				return err;
-+			flexcan_chip_stop(dev);
- 		}
- 		netif_stop_queue(dev);
- 		netif_device_detach(dev);
-@@ -1999,7 +1998,9 @@ static int __maybe_unused flexcan_resume
- 			if (err)
- 				return err;
- 		} else {
--			err = flexcan_chip_enable(priv);
-+			err = flexcan_chip_start(dev);
-+			if (err)
-+				return err;
- 		}
- 	}
- 
diff --git a/target/linux/layerscape/patches-5.4/802-can-0026-can-flexcan-fix-deadlock-when-using-self-wakeup.patch b/target/linux/layerscape/patches-5.4/802-can-0026-can-flexcan-fix-deadlock-when-using-self-wakeup.patch
deleted file mode 100644
index 2d55cb9401..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0026-can-flexcan-fix-deadlock-when-using-self-wakeup.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 59876225748221d7ebbdb9c892a2086420ddd80d Mon Sep 17 00:00:00 2001
-From: Sean Nyekjaer <sean@geanix.com>
-Date: Thu, 14 Nov 2019 19:56:28 +0800
-Subject: [PATCH] can: flexcan: fix deadlock when using self wakeup
-
-When suspending, when there is still can traffic on the interfaces the
-flexcan immediately wakes the platform again. As it should :-). But it
-throws this error msg:
-[ 3169.378661] PM: noirq suspend of devices failed
-
-On the way down to suspend the interface that throws the error message does
-call flexcan_suspend but fails to call flexcan_noirq_suspend. That means the
-flexcan_enter_stop_mode is called, but on the way out of suspend the driver
-only calls flexcan_resume and skips flexcan_noirq_resume, thus it doesn't call
-flexcan_exit_stop_mode. This leaves the flexcan in stop mode, and with the
-current driver it can't recover from this even with a soft reboot, it requires
-a hard reboot.
-
-This patch can fix deadlock when using self wakeup, it happenes to be
-able to fix another issue that frames out-of-order in first IRQ handler
-run after wakeup.
-
-In wakeup case, after system resume, frames received out-of-order,the
-problem is wakeup latency from frame reception to IRQ handler is much
-bigger than the counter overflow. This means it's impossible to sort the
-CAN frames by timestamp. The reason is that controller exits stop mode
-during noirq resume, then it can receive the frame immediately. If
-noirq reusme stage consumes much time, it will extend interrupt response
-time.
-
-Fixes: de3578c198c6 ("can: flexcan: add self wakeup support")
-Signed-off-by: Sean Nyekjaer <sean@geanix.com>
-Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
----
- drivers/net/can/flexcan.c | 9 +++++++--
- 1 file changed, 7 insertions(+), 2 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -137,8 +137,7 @@
- 	(FLEXCAN_ESR_ERR_BUS | FLEXCAN_ESR_ERR_STATE)
- #define FLEXCAN_ESR_ALL_INT \
- 	(FLEXCAN_ESR_TWRN_INT | FLEXCAN_ESR_RWRN_INT | \
--	 FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT | \
--	 FLEXCAN_ESR_WAK_INT)
-+	 FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT)
- 
- /* FLEXCAN Bit Timing register (CBT) bits */
- #define FLEXCAN_CBT_BTF			BIT(31)
-@@ -1062,6 +1061,12 @@ static irqreturn_t flexcan_irq(int irq,
- 
- 	reg_esr = priv->read(&regs->esr);
- 
-+	/* ACK wakeup interrupt */
-+	if (reg_esr & FLEXCAN_ESR_WAK_INT) {
-+		handled = IRQ_HANDLED;
-+		priv->write(reg_esr & FLEXCAN_ESR_WAK_INT, &regs->esr);
-+	}
-+
- 	/* ACK all bus error and state change IRQ sources */
- 	if (reg_esr & FLEXCAN_ESR_ALL_INT) {
- 		handled = IRQ_HANDLED;
diff --git a/target/linux/layerscape/patches-5.4/802-can-0027-can-flexcan-add-CAN-wakeup-function-for-i.MX8.patch b/target/linux/layerscape/patches-5.4/802-can-0027-can-flexcan-add-CAN-wakeup-function-for-i.MX8.patch
deleted file mode 100644
index 29104bd14e..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0027-can-flexcan-add-CAN-wakeup-function-for-i.MX8.patch
+++ /dev/null
@@ -1,193 +0,0 @@
-From 140de383d9d26e8be300b7ba86d56b47898cd8c9 Mon Sep 17 00:00:00 2001
-From: Joakim Zhang <qiangqing.zhang@nxp.com>
-Date: Tue, 30 Jul 2019 18:01:11 +0800
-Subject: [PATCH] can: flexcan: add CAN wakeup function for i.MX8
-
-The System Controller Firmware (SCFW) is a low-level system function
-which runs on a dedicated Cortex-M core to provide power, clock, and
-resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
-(QM, QP), and i.MX8QX (QXP, DX).
-
-SCU driver manages the IPC interface between host CPU and the
-SCU firmware running on M4.
-
-For i.MX8, stop mode request is controlled by System Controller Unit(SCU)
-firmware.
-
-Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
----
- drivers/net/can/flexcan.c | 99 ++++++++++++++++++++++++++++++++++++++++-------
- 1 file changed, 86 insertions(+), 13 deletions(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -29,6 +29,11 @@
- #include <linux/pinctrl/consumer.h>
- #include <linux/regmap.h>
- 
-+#ifdef CONFIG_IMX_SCU_SOC
-+#include <linux/firmware/imx/sci.h>
-+#include <dt-bindings/firmware/imx/rsrc.h>
-+#endif
-+
- #define DRV_NAME			"flexcan"
- 
- /* 8 for RX fifo and 2 error handling */
-@@ -223,6 +228,7 @@
- #define FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN	BIT(7) /* default to BE register access */
- #define FLEXCAN_QUIRK_SETUP_STOP_MODE		BIT(8) /* Setup stop mode to support wakeup */
- #define FLEXCAN_QUIRK_TIMESTAMP_SUPPORT_FD	BIT(9) /* Use timestamp then support can fd mode */
-+#define FLEXCAN_QUIRK_USE_SCFW			BIT(10) /* Use System Controller Firmware */
- 
- /* Structure of the message buffer */
- struct flexcan_mb {
-@@ -323,6 +329,11 @@ struct flexcan_priv {
- 	struct regulator *reg_xceiver;
- 	struct flexcan_stop_mode stm;
- 
-+#ifdef CONFIG_IMX_SCU_SOC
-+	/* IPC handle when enable stop mode by System Controller firmware(scfw) */
-+	struct imx_sc_ipc *sc_ipc_handle;
-+#endif
-+
- 	/* Read and Write APIs */
- 	u32 (*read)(void __iomem *addr);
- 	void (*write)(u32 val, void __iomem *addr);
-@@ -352,7 +363,8 @@ static const struct flexcan_devtype_data
- static struct flexcan_devtype_data fsl_imx8qm_devtype_data = {
- 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
- 		FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
--		FLEXCAN_QUIRK_TIMESTAMP_SUPPORT_FD,
-+		FLEXCAN_QUIRK_TIMESTAMP_SUPPORT_FD | FLEXCAN_QUIRK_SETUP_STOP_MODE |
-+		FLEXCAN_QUIRK_USE_SCFW,
- };
- 
- static const struct flexcan_devtype_data fsl_vf610_devtype_data = {
-@@ -503,6 +515,32 @@ static void flexcan_enable_wakeup_irq(st
- 	priv->write(reg_mcr, &regs->mcr);
- }
- 
-+#ifdef CONFIG_IMX_SCU_SOC
-+static void flexcan_stop_mode_enable_scfw(struct flexcan_priv *priv, bool enabled)
-+{
-+	struct device_node *np = priv->dev->of_node;
-+	u32 rsrc_id, val;
-+	int idx;
-+
-+	idx = of_alias_get_id(np, "can");
-+	if (idx == 0)
-+		rsrc_id = IMX_SC_R_CAN_0;
-+	else if (idx == 1)
-+		rsrc_id = IMX_SC_R_CAN_1;
-+	else
-+		rsrc_id = IMX_SC_R_CAN_2;
-+
-+	val = enabled ? 1 : 0;
-+	/* stop mode request */
-+	imx_sc_misc_set_control(priv->sc_ipc_handle, rsrc_id, IMX_SC_C_IPG_STOP, val);
-+}
-+#else
-+static int flexcan_stop_mode_enable_scfw(struct flexcan_priv *priv, bool enabled)
-+{
-+	return 0;
-+}
-+#endif
-+
- static inline int flexcan_enter_stop_mode(struct flexcan_priv *priv)
- {
- 	struct flexcan_regs __iomem *regs = priv->regs;
-@@ -512,9 +550,12 @@ static inline int flexcan_enter_stop_mod
- 	reg_mcr |= FLEXCAN_MCR_SLF_WAK;
- 	priv->write(reg_mcr, &regs->mcr);
- 
--	/* enable stop request */
--	regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr,
--			   1 << priv->stm.req_bit, 1 << priv->stm.req_bit);
-+	 /* enable stop request */
-+	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_SCFW)
-+		flexcan_stop_mode_enable_scfw(priv, true);
-+	else
-+		regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr,
-+				   1 << priv->stm.req_bit, 1 << priv->stm.req_bit);
- 
- 	return flexcan_low_power_enter_ack(priv);
- }
-@@ -525,8 +566,11 @@ static inline int flexcan_exit_stop_mode
- 	u32 reg_mcr;
- 
- 	/* remove stop request */
--	regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr,
--			   1 << priv->stm.req_bit, 0);
-+	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_SCFW)
-+		flexcan_stop_mode_enable_scfw(priv, false);
-+	else
-+		regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr,
-+				   1 << priv->stm.req_bit, 0);
- 
- 
- 	reg_mcr = priv->read(&regs->mcr);
-@@ -1782,11 +1826,6 @@ static int flexcan_setup_stop_mode(struc
- 		gpr_np->full_name, priv->stm.req_gpr, priv->stm.req_bit,
- 		priv->stm.ack_gpr, priv->stm.ack_bit);
- 
--	device_set_wakeup_capable(&pdev->dev, true);
--
--	if (of_property_read_bool(np, "wakeup-source"))
--		device_set_wakeup_enable(&pdev->dev, true);
--
- 	return 0;
- 
- out_put_node:
-@@ -1794,6 +1833,30 @@ out_put_node:
- 	return ret;
- }
- 
-+#ifdef CONFIG_IMX_SCU_SOC
-+static int flexcan_setup_stop_mode_scfw(struct platform_device *pdev)
-+{
-+	struct net_device *dev = platform_get_drvdata(pdev);
-+	struct flexcan_priv *priv;
-+	int ret;
-+
-+	priv = netdev_priv(dev);
-+
-+	ret = imx_scu_get_handle(&(priv->sc_ipc_handle));
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "get ipc handle used by SCU failed\n");
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+#else
-+static int flexcan_setup_stop_mode_scfw(struct platform_device *pdev)
-+{
-+	return 0;
-+}
-+#endif
-+
- static const struct of_device_id flexcan_of_match[] = {
- 	{ .compatible = "fsl,imx8qm-flexcan", .data = &fsl_imx8qm_devtype_data, },
- 	{ .compatible = "fsl,imx6q-flexcan", .data = &fsl_imx6q_devtype_data, },
-@@ -1936,9 +1999,19 @@ static int flexcan_probe(struct platform
- 	devm_can_led_init(dev);
- 
- 	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE) {
--		err = flexcan_setup_stop_mode(pdev);
--		if (err)
-+		if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_SCFW)
-+			err = flexcan_setup_stop_mode_scfw(pdev);
-+		else
-+			err = flexcan_setup_stop_mode(pdev);
-+
-+		if (err) {
- 			dev_dbg(&pdev->dev, "failed to setup stop-mode\n");
-+		} else {
-+			device_set_wakeup_capable(&pdev->dev, true);
-+
-+			if (of_property_read_bool(pdev->dev.of_node, "wakeup-source"))
-+				device_set_wakeup_enable(&pdev->dev, true);
-+		}
- 	}
- 
- 	return 0;
diff --git a/target/linux/layerscape/patches-5.4/802-can-0028-can-flexcan-Add-S32V234-support-to-FlexCAN-driver.patch b/target/linux/layerscape/patches-5.4/802-can-0028-can-flexcan-Add-S32V234-support-to-FlexCAN-driver.patch
deleted file mode 100644
index b12534c8d3..0000000000
--- a/target/linux/layerscape/patches-5.4/802-can-0028-can-flexcan-Add-S32V234-support-to-FlexCAN-driver.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 6a892e9147ff5b6a21a752326841869427068f01 Mon Sep 17 00:00:00 2001
-From: Chircu-Mare Bogdan-Petru <Bogdan.Chircu@freescale.com>
-Date: Tue, 3 Nov 2015 17:25:46 +0200
-Subject: [PATCH] can: flexcan: Add S32V234 support to FlexCAN driver
-
-The FlexCAN driver is compatible with the modules on S32V234 chips.
-
-Signed-off-by: Chircu-Mare Bogdan-Petru <Bogdan.Chircu@freescale.com>
-Signed-off-by: Dan Nica <dan.nica@nxp.com>
-Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
-Reviewed-by: Li Yang <leoyang.li@nxp.com>
-Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com>
-Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
----
- drivers/net/can/flexcan.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -6,6 +6,7 @@
- // Copyright (c) 2009 Sascha Hauer, Pengutronix
- // Copyright (c) 2010-2017 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
- // Copyright (c) 2014 David Jander, Protonic Holland
-+// Copyright 2015, 2018 NXP
- //
- // Based on code originally by Andrey Volkov <avolkov@varma-el.com>
- 
-@@ -384,6 +385,10 @@ static const struct flexcan_devtype_data
- 		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP,
- };
- 
-+static struct flexcan_devtype_data fsl_s32v234_devtype_data = {
-+	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_DISABLE_MECR,
-+};
-+
- static const struct can_bittiming_const flexcan_bittiming_const = {
- 	.name = DRV_NAME,
- 	.tseg1_min = 4,
-@@ -1868,6 +1873,8 @@ static const struct of_device_id flexcan
- 	{ .compatible = "fsl,vf610-flexcan", .data = &fsl_vf610_devtype_data, },
- 	{ .compatible = "fsl,ls1021ar2-flexcan", .data = &fsl_ls1021a_r2_devtype_data, },
- 	{ .compatible = "fsl,lx2160ar1-flexcan", .data = &fsl_lx2160a_r1_devtype_data, },
-+	{ .compatible = "fsl,s32v234-flexcan",
-+	  .data = &fsl_s32v234_devtype_data, },
- 	{ /* sentinel */ },
- };
- MODULE_DEVICE_TABLE(of, flexcan_of_match);
diff --git a/target/linux/layerscape/patches-5.4/803-clock-0001-clk-ls1028a-Add-clock-driver-for-Display-output-inte.patch b/target/linux/layerscape/patches-5.4/803-clock-0001-clk-ls1028a-Add-clock-driver-for-Display-output-inte.patch
deleted file mode 100644
index 9d548d5f8f..0000000000
--- a/target/linux/layerscape/patches-5.4/803-clock-0001-clk-ls1028a-Add-clock-driver-for-Display-output-inte.patch
+++ /dev/null
@@ -1,351 +0,0 @@
-From e9e60d44268e2cfba73efeb7c3e68c355940f2c3 Mon Sep 17 00:00:00 2001
-From: Wen He <wen.he_1@nxp.com>
-Date: Wed, 27 Nov 2019 11:19:26 +0800
-Subject: [PATCH] clk: ls1028a: Add clock driver for Display output interface
-
-Add clock driver for QorIQ LS1028A Display output interfaces(LCD, DPHY),
-as implemented in TSMC CLN28HPM PLL, this PLL supports the programmable
-integer division and range of the display output pixel clock's 27-594MHz.
-
-Signed-off-by: Wen He <wen.he_1@nxp.com>
-Signed-off-by: Michael Walle <michael@walle.cc>
----
- drivers/clk/Kconfig      |  10 ++
- drivers/clk/Makefile     |   1 +
- drivers/clk/clk-plldig.c | 301 +++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 312 insertions(+)
- create mode 100644 drivers/clk/clk-plldig.c
-
---- a/drivers/clk/Kconfig
-+++ b/drivers/clk/Kconfig
-@@ -218,6 +218,16 @@ config CLK_QORIQ
- 	  This adds the clock driver support for Freescale QorIQ platforms
- 	  using common clock framework.
- 
-+config CLK_LS1028A_PLLDIG
-+        tristate "Clock driver for LS1028A Display output"
-+        depends on ARCH_LAYERSCAPE || COMPILE_TEST
-+        default ARCH_LAYERSCAPE
-+        help
-+          This driver support the Display output interfaces(LCD, DPHY) pixel clocks
-+          of the QorIQ Layerscape LS1028A, as implemented TSMC CLN28HPM PLL. Not all
-+          features of the PLL are currently supported by the driver. By default,
-+          configured bypass mode with this PLL.
-+
- config COMMON_CLK_XGENE
- 	bool "Clock driver for APM XGene SoC"
- 	default ARCH_XGENE
---- a/drivers/clk/Makefile
-+++ b/drivers/clk/Makefile
-@@ -43,6 +43,7 @@ obj-$(CONFIG_ARCH_NPCM7XX)	    	+= clk-n
- obj-$(CONFIG_ARCH_NSPIRE)		+= clk-nspire.o
- obj-$(CONFIG_COMMON_CLK_OXNAS)		+= clk-oxnas.o
- obj-$(CONFIG_COMMON_CLK_PALMAS)		+= clk-palmas.o
-+obj-$(CONFIG_CLK_LS1028A_PLLDIG)	+= clk-plldig.o
- obj-$(CONFIG_COMMON_CLK_PWM)		+= clk-pwm.o
- obj-$(CONFIG_CLK_QORIQ)			+= clk-qoriq.o
- obj-$(CONFIG_COMMON_CLK_RK808)		+= clk-rk808.o
---- /dev/null
-+++ b/drivers/clk/clk-plldig.c
-@@ -0,0 +1,301 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 NXP
-+ *
-+ * Clock driver for LS1028A Display output interfaces(LCD, DPHY).
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/device.h>
-+#include <linux/module.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/iopoll.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/bitfield.h>
-+
-+/* PLLDIG register offsets and bit masks */
-+#define PLLDIG_REG_PLLSR            0x24
-+#define PLLDIG_LOCK_MASK            BIT(2)
-+#define PLLDIG_REG_PLLDV            0x28
-+#define PLLDIG_MFD_MASK             GENMASK(7, 0)
-+#define PLLDIG_RFDPHI1_MASK         GENMASK(30, 25)
-+#define PLLDIG_REG_PLLFM            0x2c
-+#define PLLDIG_SSCGBYP_ENABLE       BIT(30)
-+#define PLLDIG_REG_PLLFD            0x30
-+#define PLLDIG_FDEN                 BIT(30)
-+#define PLLDIG_FRAC_MASK            GENMASK(15, 0)
-+#define PLLDIG_DTH_MASK             GENMASK(17, 16)
-+#define PLLDIG_DTH_DISABLE          3
-+#define PLLDIG_REG_PLLCAL1          0x38
-+#define PLLDIG_REG_PLLCAL2          0x3c
-+
-+/* Range of the VCO frequencies, in Hz */
-+#define PLLDIG_MIN_VCO_FREQ         650000000
-+#define PLLDIG_MAX_VCO_FREQ         1300000000
-+
-+/* Range of the output frequencies, in Hz */
-+#define PHI1_MIN_FREQ               27000000
-+#define PHI1_MAX_FREQ               600000000
-+
-+/* Maximum value of the reduced frequency divider */
-+#define MAX_RFDPHI1          63UL
-+
-+/* Best value of multiplication factor divider */
-+#define PLLDIG_DEFAULT_MFD   44
-+
-+/*
-+ * Denominator part of the fractional part of the
-+ * loop multiplication factor.
-+ */
-+#define MFDEN          20480
-+
-+static const struct clk_parent_data parent_data[] = {
-+	{.index = 0},
-+};
-+
-+struct clk_plldig {
-+	struct clk_hw hw;
-+	void __iomem *regs;
-+	unsigned int vco_freq;
-+};
-+
-+#define to_clk_plldig(_hw)	container_of(_hw, struct clk_plldig, hw)
-+
-+static int plldig_enable(struct clk_hw *hw)
-+{
-+	struct clk_plldig *data = to_clk_plldig(hw);
-+	u32 val;
-+
-+	val = readl(data->regs + PLLDIG_REG_PLLFM);
-+	/*
-+	 * Use Bypass mode with PLL off by default, the frequency overshoot
-+	 * detector output was disable. SSCG Bypass mode should be enable.
-+	 */
-+	val |= PLLDIG_SSCGBYP_ENABLE;
-+	writel(val, data->regs + PLLDIG_REG_PLLFM);
-+
-+	return 0;
-+}
-+
-+static void plldig_disable(struct clk_hw *hw)
-+{
-+	struct clk_plldig *data = to_clk_plldig(hw);
-+	u32 val;
-+
-+	val = readl(data->regs + PLLDIG_REG_PLLFM);
-+
-+	val &= ~PLLDIG_SSCGBYP_ENABLE;
-+	val |= FIELD_PREP(PLLDIG_SSCGBYP_ENABLE, 0x0);
-+
-+	writel(val, data->regs + PLLDIG_REG_PLLFM);
-+}
-+
-+static int plldig_is_enabled(struct clk_hw *hw)
-+{
-+	struct clk_plldig *data = to_clk_plldig(hw);
-+
-+	return (readl(data->regs + PLLDIG_REG_PLLFM) &
-+			      PLLDIG_SSCGBYP_ENABLE);
-+}
-+
-+static unsigned long plldig_recalc_rate(struct clk_hw *hw,
-+					unsigned long parent_rate)
-+{
-+	struct clk_plldig *data = to_clk_plldig(hw);
-+	u32 val, rfdphi1;
-+
-+	val = readl(data->regs + PLLDIG_REG_PLLDV);
-+
-+	/* Check if PLL is bypassed */
-+	if (val & PLLDIG_SSCGBYP_ENABLE)
-+		return parent_rate;
-+
-+	rfdphi1 = FIELD_GET(PLLDIG_RFDPHI1_MASK, val);
-+
-+	/*
-+	 * If RFDPHI1 has a value of 1 the VCO frequency is also divided by
-+	 * one.
-+	 */
-+	if (!rfdphi1)
-+		rfdphi1 = 1;
-+
-+	return DIV_ROUND_UP(data->vco_freq, rfdphi1);
-+}
-+
-+static unsigned long plldig_calc_target_div(unsigned long vco_freq,
-+					    unsigned long target_rate)
-+{
-+	unsigned long div;
-+
-+	div = DIV_ROUND_CLOSEST(vco_freq, target_rate);
-+	div = max(1UL, div);
-+	div = min(div, MAX_RFDPHI1);
-+
-+	return div;
-+}
-+
-+static int plldig_determine_rate(struct clk_hw *hw,
-+				 struct clk_rate_request *req)
-+{
-+	struct clk_plldig *data = to_clk_plldig(hw);
-+	unsigned int div;
-+
-+	if (req->rate < PHI1_MIN_FREQ)
-+		req->rate = PHI1_MIN_FREQ;
-+	if (req->rate > PHI1_MAX_FREQ)
-+		req->rate = PHI1_MAX_FREQ;
-+
-+	div = plldig_calc_target_div(data->vco_freq, req->rate);
-+	req->rate = DIV_ROUND_UP(data->vco_freq, div);
-+
-+	return 0;
-+}
-+
-+static int plldig_set_rate(struct clk_hw *hw, unsigned long rate,
-+		unsigned long parent_rate)
-+{
-+	struct clk_plldig *data = to_clk_plldig(hw);
-+	unsigned int val, cond;
-+	unsigned int rfdphi1;
-+
-+	if (rate < PHI1_MIN_FREQ)
-+		rate = PHI1_MIN_FREQ;
-+	if (rate > PHI1_MAX_FREQ)
-+		rate = PHI1_MAX_FREQ;
-+
-+	rfdphi1 = plldig_calc_target_div(data->vco_freq, rate);
-+
-+	/* update the divider value */
-+	val = readl(data->regs + PLLDIG_REG_PLLDV);
-+	val &= ~PLLDIG_RFDPHI1_MASK;
-+	val |= FIELD_PREP(PLLDIG_RFDPHI1_MASK, rfdphi1);
-+	writel(val, data->regs + PLLDIG_REG_PLLDV);
-+
-+	/* delay 200us make sure that old lock state is cleared */
-+	udelay(200);
-+
-+	/* Wait until PLL is locked or timeout (maximum 1000 usecs) */
-+	return readl_poll_timeout_atomic(data->regs + PLLDIG_REG_PLLSR, cond,
-+					 cond & PLLDIG_LOCK_MASK, 0,
-+					 USEC_PER_MSEC);
-+}
-+
-+static const struct clk_ops plldig_clk_ops = {
-+	.enable = plldig_enable,
-+	.disable = plldig_disable,
-+	.is_enabled = plldig_is_enabled,
-+	.recalc_rate = plldig_recalc_rate,
-+	.determine_rate = plldig_determine_rate,
-+	.set_rate = plldig_set_rate,
-+};
-+
-+static int plldig_init(struct clk_hw *hw)
-+{
-+	struct clk_plldig *data = to_clk_plldig(hw);
-+	struct clk_hw *parent = clk_hw_get_parent(hw);
-+	unsigned long parent_rate = clk_hw_get_rate(parent);
-+	unsigned long val;
-+	unsigned long long lltmp;
-+	unsigned int mfd, fracdiv = 0;
-+
-+	if (!parent)
-+		return -EINVAL;
-+
-+	if (data->vco_freq) {
-+		mfd = data->vco_freq / parent_rate;
-+		lltmp = data->vco_freq % parent_rate;
-+		lltmp *= MFDEN;
-+		do_div(lltmp, parent_rate);
-+		fracdiv = lltmp;
-+	} else {
-+		mfd = PLLDIG_DEFAULT_MFD;
-+		data->vco_freq = parent_rate * mfd;
-+	}
-+
-+	val = FIELD_PREP(PLLDIG_MFD_MASK, mfd);
-+	writel(val, data->regs + PLLDIG_REG_PLLDV);
-+
-+	if (fracdiv) {
-+		val = FIELD_PREP(PLLDIG_FRAC_MASK, fracdiv);
-+		/* Enable fractional divider */
-+		val |= PLLDIG_FDEN;
-+		/* Disable dither */
-+		val |= FIELD_PREP(PLLDIG_DTH_MASK, PLLDIG_DTH_DISABLE);
-+		writel(val, data->regs + PLLDIG_REG_PLLFD);
-+	}
-+
-+	return 0;
-+}
-+
-+static int plldig_clk_probe(struct platform_device *pdev)
-+{
-+	struct clk_plldig *data;
-+	struct resource *mem;
-+	struct device *dev = &pdev->dev;
-+	int ret;
-+
-+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
-+	if (!data)
-+		return -ENOMEM;
-+
-+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	data->regs = devm_ioremap_resource(dev, mem);
-+	if (IS_ERR(data->regs))
-+		return PTR_ERR(data->regs);
-+
-+	data->hw.init = CLK_HW_INIT_PARENTS_DATA("dpclk",
-+						 parent_data,
-+						 &plldig_clk_ops,
-+						 0);
-+
-+	ret = devm_clk_hw_register(dev, &data->hw);
-+	if (ret) {
-+		dev_err(dev, "failed to register %s clock\n",
-+						dev->of_node->name);
-+		return ret;
-+	}
-+
-+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
-+					  &data->hw);
-+	if (ret) {
-+		dev_err(dev, "unable to add clk provider\n");
-+		return ret;
-+	}
-+
-+	/*
-+	 * The frequency of the VCO cannot be changed during runtime.
-+	 * Therefore, let the user specify a desired frequency.
-+	 */
-+	if (!of_property_read_u32(dev->of_node, "vco-frequency",
-+				  &data->vco_freq)) {
-+		if (data->vco_freq < PLLDIG_MIN_VCO_FREQ ||
-+		    data->vco_freq > PLLDIG_MAX_VCO_FREQ)
-+			return -EINVAL;
-+	}
-+
-+	return plldig_init(&data->hw);
-+}
-+
-+static const struct of_device_id plldig_clk_id[] = {
-+	{ .compatible = "fsl,ls1028a-plldig"},
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(of, plldig_clk_id);
-+
-+static struct platform_driver plldig_clk_driver = {
-+	.driver = {
-+		.name = "plldig-clock",
-+		.of_match_table = plldig_clk_id,
-+	},
-+	.probe = plldig_clk_probe,
-+};
-+module_platform_driver(plldig_clk_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Wen He <wen.he_1@nxp.com>");
-+MODULE_DESCRIPTION("LS1028A Display output interface pixel clock driver");
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0001-crypto-add-support-for-TLS-1.0-record-encryption.patch b/target/linux/layerscape/patches-5.4/804-crypto-0001-crypto-add-support-for-TLS-1.0-record-encryption.patch
deleted file mode 100644
index c73baa42ea..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0001-crypto-add-support-for-TLS-1.0-record-encryption.patch
+++ /dev/null
@@ -1,1205 +0,0 @@
-From 223db480c54de8ec47b3b0b4c6066b58342a5ad4 Mon Sep 17 00:00:00 2001
-From: Radu Alexe <radu.alexe@nxp.com>
-Date: Wed, 3 May 2017 16:17:13 +0300
-Subject: [PATCH] crypto: add support for TLS 1.0 record encryption
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch adds kernel support for encryption/decryption of TLS 1.0
-records using block ciphers. Implementation is similar to authenc in the
-sense that the base algorithms (AES, SHA1) are combined in a template to
-produce TLS encapsulation frames. The composite algorithm will be called
-"tls10(hmac(<digest>),cbc(<cipher>))". The cipher and hmac keys are
-wrapped in the same format used by authenc.c.
-
-Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
-Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com>
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- crypto/Kconfig   |  20 ++
- crypto/Makefile  |   1 +
- crypto/tcrypt.c  |   3 +
- crypto/testmgr.c | 238 ++++++++++++++++++++++
- crypto/testmgr.h | 224 ++++++++++++++++++++
- crypto/tls.c     | 607 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
- 6 files changed, 1093 insertions(+)
- create mode 100644 crypto/tls.c
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -349,6 +349,26 @@ config CRYPTO_ECHAINIV
- 	  a sequence number xored with a salt.  This is the default
- 	  algorithm for CBC.
- 
-+config CRYPTO_TLS
-+	tristate "TLS support"
-+	select CRYPTO_AEAD
-+	select CRYPTO_BLKCIPHER
-+	select CRYPTO_MANAGER
-+	select CRYPTO_HASH
-+	select CRYPTO_NULL
-+	select CRYPTO_AUTHENC
-+	help
-+	  Support for TLS 1.0 record encryption and decryption
-+
-+	  This module adds support for encryption/decryption of TLS 1.0 frames
-+	  using blockcipher algorithms. The name of the resulting algorithm is
-+	  "tls10(hmac(<digest>),cbc(<cipher>))". By default, the generic base
-+	  algorithms are used (e.g. aes-generic, sha1-generic), but hardware
-+	  accelerated versions will be used automatically if available.
-+
-+	  User-space applications (OpenSSL, GnuTLS) can offload TLS 1.0
-+	  operations through AF_ALG or cryptodev interfaces
-+
- comment "Block modes"
- 
- config CRYPTO_CBC
---- a/crypto/Makefile
-+++ b/crypto/Makefile
-@@ -144,6 +144,7 @@ obj-$(CONFIG_CRYPTO_CRC32) += crc32_gene
- obj-$(CONFIG_CRYPTO_CRCT10DIF) += crct10dif_common.o crct10dif_generic.o
- obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o authencesn.o
- obj-$(CONFIG_CRYPTO_LZO) += lzo.o lzo-rle.o
-+obj-$(CONFIG_CRYPTO_TLS) += tls.o
- obj-$(CONFIG_CRYPTO_LZ4) += lz4.o
- obj-$(CONFIG_CRYPTO_LZ4HC) += lz4hc.o
- obj-$(CONFIG_CRYPTO_XXHASH) += xxhash_generic.o
---- a/crypto/tcrypt.c
-+++ b/crypto/tcrypt.c
-@@ -2049,6 +2049,9 @@ static int do_test(const char *alg, u32
- 		ret += tcrypt_test("cbc(sm4)");
- 		ret += tcrypt_test("ctr(sm4)");
- 		break;
-+	case 192:
-+		ret += tcrypt_test("tls10(hmac(sha1),cbc(aes))");
-+		break;
- 	case 200:
- 		test_cipher_speed("ecb(aes)", ENCRYPT, sec, NULL, 0,
- 				speed_template_16_24_32);
---- a/crypto/testmgr.c
-+++ b/crypto/testmgr.c
-@@ -111,6 +111,13 @@ struct drbg_test_suite {
- 	unsigned int count;
- };
- 
-+struct tls_test_suite {
-+	struct {
-+		struct tls_testvec *vecs;
-+		unsigned int count;
-+	} enc, dec;
-+};
-+
- struct akcipher_test_suite {
- 	const struct akcipher_testvec *vecs;
- 	unsigned int count;
-@@ -135,6 +142,7 @@ struct alg_test_desc {
- 		struct hash_test_suite hash;
- 		struct cprng_test_suite cprng;
- 		struct drbg_test_suite drbg;
-+		struct tls_test_suite tls;
- 		struct akcipher_test_suite akcipher;
- 		struct kpp_test_suite kpp;
- 	} suite;
-@@ -2294,6 +2302,227 @@ static int test_aead(const char *driver,
- 	return 0;
- }
- 
-+static int __test_tls(struct crypto_aead *tfm, int enc,
-+		      struct tls_testvec *template, unsigned int tcount,
-+		      const bool diff_dst)
-+{
-+	const char *algo = crypto_tfm_alg_driver_name(crypto_aead_tfm(tfm));
-+	unsigned int i, k, authsize;
-+	char *q;
-+	struct aead_request *req;
-+	struct scatterlist *sg;
-+	struct scatterlist *sgout;
-+	const char *e, *d;
-+	struct crypto_wait wait;
-+	void *input;
-+	void *output;
-+	void *assoc;
-+	char *iv;
-+	char *key;
-+	char *xbuf[XBUFSIZE];
-+	char *xoutbuf[XBUFSIZE];
-+	char *axbuf[XBUFSIZE];
-+	int ret = -ENOMEM;
-+
-+	if (testmgr_alloc_buf(xbuf))
-+		goto out_noxbuf;
-+
-+	if (diff_dst && testmgr_alloc_buf(xoutbuf))
-+		goto out_nooutbuf;
-+
-+	if (testmgr_alloc_buf(axbuf))
-+		goto out_noaxbuf;
-+
-+	iv = kzalloc(MAX_IVLEN, GFP_KERNEL);
-+	if (!iv)
-+		goto out_noiv;
-+
-+	key = kzalloc(MAX_KEYLEN, GFP_KERNEL);
-+	if (!key)
-+		goto out_nokey;
-+
-+	sg = kmalloc(sizeof(*sg) * 8 * (diff_dst ? 2 : 1), GFP_KERNEL);
-+	if (!sg)
-+		goto out_nosg;
-+
-+	sgout = sg + 8;
-+
-+	d = diff_dst ? "-ddst" : "";
-+	e = enc ? "encryption" : "decryption";
-+
-+	crypto_init_wait(&wait);
-+
-+	req = aead_request_alloc(tfm, GFP_KERNEL);
-+	if (!req) {
-+		pr_err("alg: tls%s: Failed to allocate request for %s\n",
-+		       d, algo);
-+		goto out;
-+	}
-+
-+	aead_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG,
-+				  crypto_req_done, &wait);
-+
-+	for (i = 0; i < tcount; i++) {
-+		input = xbuf[0];
-+		assoc = axbuf[0];
-+
-+		ret = -EINVAL;
-+		if (WARN_ON(template[i].ilen > PAGE_SIZE ||
-+			    template[i].alen > PAGE_SIZE))
-+			goto out;
-+
-+		memcpy(assoc, template[i].assoc, template[i].alen);
-+		memcpy(input, template[i].input, template[i].ilen);
-+
-+		if (template[i].iv)
-+			memcpy(iv, template[i].iv, MAX_IVLEN);
-+		else
-+			memset(iv, 0, MAX_IVLEN);
-+
-+		crypto_aead_clear_flags(tfm, ~0);
-+
-+		if (template[i].klen > MAX_KEYLEN) {
-+			pr_err("alg: aead%s: setkey failed on test %d for %s: key size %d > %d\n",
-+			       d, i, algo, template[i].klen, MAX_KEYLEN);
-+			ret = -EINVAL;
-+			goto out;
-+		}
-+		memcpy(key, template[i].key, template[i].klen);
-+
-+		ret = crypto_aead_setkey(tfm, key, template[i].klen);
-+		if (!ret == template[i].fail) {
-+			pr_err("alg: tls%s: setkey failed on test %d for %s: flags=%x\n",
-+			       d, i, algo, crypto_aead_get_flags(tfm));
-+			goto out;
-+		} else if (ret)
-+			continue;
-+
-+		authsize = 20;
-+		ret = crypto_aead_setauthsize(tfm, authsize);
-+		if (ret) {
-+			pr_err("alg: aead%s: Failed to set authsize to %u on test %d for %s\n",
-+			       d, authsize, i, algo);
-+			goto out;
-+		}
-+
-+		k = !!template[i].alen;
-+		sg_init_table(sg, k + 1);
-+		sg_set_buf(&sg[0], assoc, template[i].alen);
-+		sg_set_buf(&sg[k], input, (enc ? template[i].rlen :
-+					   template[i].ilen));
-+		output = input;
-+
-+		if (diff_dst) {
-+			sg_init_table(sgout, k + 1);
-+			sg_set_buf(&sgout[0], assoc, template[i].alen);
-+
-+			output = xoutbuf[0];
-+			sg_set_buf(&sgout[k], output,
-+				   (enc ? template[i].rlen : template[i].ilen));
-+		}
-+
-+		aead_request_set_crypt(req, sg, (diff_dst) ? sgout : sg,
-+				       template[i].ilen, iv);
-+
-+		aead_request_set_ad(req, template[i].alen);
-+
-+		ret = crypto_wait_req(enc ? crypto_aead_encrypt(req)
-+				      : crypto_aead_decrypt(req), &wait);
-+
-+		switch (ret) {
-+		case 0:
-+			if (template[i].novrfy) {
-+				/* verification was supposed to fail */
-+				pr_err("alg: tls%s: %s failed on test %d for %s: ret was 0, expected -EBADMSG\n",
-+				       d, e, i, algo);
-+				/* so really, we got a bad message */
-+				ret = -EBADMSG;
-+				goto out;
-+			}
-+			break;
-+		case -EBADMSG:
-+			/* verification failure was expected */
-+			if (template[i].novrfy)
-+				continue;
-+			/* fall through */
-+		default:
-+			pr_err("alg: tls%s: %s failed on test %d for %s: ret=%d\n",
-+			       d, e, i, algo, -ret);
-+			goto out;
-+		}
-+
-+		q = output;
-+		if (memcmp(q, template[i].result, template[i].rlen)) {
-+			pr_err("alg: tls%s: Test %d failed on %s for %s\n",
-+			       d, i, e, algo);
-+			hexdump(q, template[i].rlen);
-+			pr_err("should be:\n");
-+			hexdump(template[i].result, template[i].rlen);
-+			ret = -EINVAL;
-+			goto out;
-+		}
-+	}
-+
-+out:
-+	aead_request_free(req);
-+
-+	kfree(sg);
-+out_nosg:
-+	kfree(key);
-+out_nokey:
-+	kfree(iv);
-+out_noiv:
-+	testmgr_free_buf(axbuf);
-+out_noaxbuf:
-+	if (diff_dst)
-+		testmgr_free_buf(xoutbuf);
-+out_nooutbuf:
-+	testmgr_free_buf(xbuf);
-+out_noxbuf:
-+	return ret;
-+}
-+
-+static int test_tls(struct crypto_aead *tfm, int enc,
-+		    struct tls_testvec *template, unsigned int tcount)
-+{
-+	int ret;
-+	/* test 'dst == src' case */
-+	ret = __test_tls(tfm, enc, template, tcount, false);
-+	if (ret)
-+		return ret;
-+	/* test 'dst != src' case */
-+	return __test_tls(tfm, enc, template, tcount, true);
-+}
-+
-+static int alg_test_tls(const struct alg_test_desc *desc, const char *driver,
-+			u32 type, u32 mask)
-+{
-+	struct crypto_aead *tfm;
-+	int err = 0;
-+
-+	tfm = crypto_alloc_aead(driver, type, mask);
-+	if (IS_ERR(tfm)) {
-+		pr_err("alg: aead: Failed to load transform for %s: %ld\n",
-+			driver, PTR_ERR(tfm));
-+		return PTR_ERR(tfm);
-+	}
-+
-+	if (desc->suite.tls.enc.vecs) {
-+		err = test_tls(tfm, ENCRYPT, desc->suite.tls.enc.vecs,
-+				desc->suite.tls.enc.count);
-+		if (err)
-+			goto out;
-+	}
-+
-+	if (!err && desc->suite.tls.dec.vecs)
-+		err = test_tls(tfm, DECRYPT, desc->suite.tls.dec.vecs,
-+			       desc->suite.tls.dec.count);
-+
-+out:
-+	crypto_free_aead(tfm);
-+	return err;
-+}
-+
- static int alg_test_aead(const struct alg_test_desc *desc, const char *driver,
- 			 u32 type, u32 mask)
- {
-@@ -5042,6 +5271,15 @@ static const struct alg_test_desc alg_te
- 			.hash = __VECS(tgr192_tv_template)
- 		}
- 	}, {
-+		.alg = "tls10(hmac(sha1),cbc(aes))",
-+		.test = alg_test_tls,
-+		.suite = {
-+			.tls = {
-+				.enc = __VECS(tls_enc_tv_template),
-+				.dec = __VECS(tls_dec_tv_template)
-+			}
-+		}
-+	}, {
- 		.alg = "vmac64(aes)",
- 		.test = alg_test_hash,
- 		.suite = {
---- a/crypto/testmgr.h
-+++ b/crypto/testmgr.h
-@@ -21,7 +21,12 @@
- #define _CRYPTO_TESTMGR_H
- 
- #include <linux/oid_registry.h>
-+#include <linux/netlink.h>
- 
-+#define MAX_DIGEST_SIZE		64
-+#define MAX_TAP			8
-+
-+#define MAX_KEYLEN		160
- #define MAX_IVLEN		32
- 
- /*
-@@ -140,6 +145,20 @@ struct drbg_testvec {
- 	size_t expectedlen;
- };
- 
-+struct tls_testvec {
-+	char *key;	/* wrapped keys for encryption and authentication */
-+	char *iv;	/* initialization vector */
-+	char *input;	/* input data */
-+	char *assoc;	/* associated data: seq num, type, version, input len */
-+	char *result;	/* result data */
-+	unsigned char fail;	/* the test failure is expected */
-+	unsigned char novrfy;	/* dec verification failure expected */
-+	unsigned char klen;	/* key length */
-+	unsigned short ilen;	/* input data length */
-+	unsigned short alen;	/* associated data length */
-+	unsigned short rlen;	/* result length */
-+};
-+
- struct akcipher_testvec {
- 	const unsigned char *key;
- 	const unsigned char *params;
-@@ -171,6 +190,211 @@ struct kpp_testvec {
- static const char zeroed_string[48];
- 
- /*
-+ * TLS1.0 synthetic test vectors
-+ */
-+static struct tls_testvec tls_enc_tv_template[] = {
-+	{
-+#ifdef __LITTLE_ENDIAN
-+		.key	= "\x08\x00"		/* rta length */
-+			"\x01\x00"		/* rta type */
-+#else
-+		.key	= "\x00\x08"		/* rta length */
-+			"\x00\x01"		/* rta type */
-+#endif
-+			"\x00\x00\x00\x10"	/* enc key length */
-+			"authenticationkey20benckeyis16_bytes",
-+		.klen	= 8 + 20 + 16,
-+		.iv	= "iv0123456789abcd",
-+		.input	= "Single block msg",
-+		.ilen	= 16,
-+		.assoc	= "\x00\x01\x02\x03\x04\x05\x06\x07"
-+			"\x00\x03\x01\x00\x10",
-+		.alen	= 13,
-+		.result	= "\xd5\xac\xb\xd2\xac\xad\x3f\xb1"
-+			"\x59\x79\x1e\x91\x5f\x52\x14\x9c"
-+			"\xc0\x75\xd8\x4c\x97\x0f\x07\x73"
-+			"\xdc\x89\x47\x49\x49\xcb\x30\x6b"
-+			"\x1b\x45\x23\xa1\xd0\x51\xcf\x02"
-+			"\x2e\xa8\x5d\xa0\xfe\xca\x82\x61",
-+		.rlen	= 16 + 20 + 12,
-+	}, {
-+#ifdef __LITTLE_ENDIAN
-+		.key	= "\x08\x00"		/* rta length */
-+			"\x01\x00"		/* rta type */
-+#else
-+		.key	= "\x00\x08"		/* rta length */
-+			"\x00\x01"		/* rta type */
-+#endif
-+			"\x00\x00\x00\x10"	/* enc key length */
-+			"authenticationkey20benckeyis16_bytes",
-+		.klen	= 8 + 20 + 16,
-+		.iv	= "iv0123456789abcd",
-+		.input	= "",
-+		.ilen	= 0,
-+		.assoc	= "\x00\x01\x02\x03\x04\x05\x06\x07"
-+			"\x00\x03\x01\x00\x00",
-+		.alen	= 13,
-+		.result = "\x58\x2a\x11\xc\x86\x8e\x4b\x67"
-+			"\x2d\x16\x26\x1a\xac\x4b\xe2\x1a"
-+			"\xe9\x6a\xcc\x4d\x6f\x79\x8a\x45"
-+			"\x1f\x4e\x27\xf2\xa7\x59\xb4\x5a",
-+		.rlen	= 20 + 12,
-+	}, {
-+#ifdef __LITTLE_ENDIAN
-+		.key	= "\x08\x00"		/* rta length */
-+			"\x01\x00"		/* rta type */
-+#else
-+		.key	= "\x00\x08"		/* rta length */
-+			"\x00\x01"		/* rta type */
-+#endif
-+			"\x00\x00\x00\x10"	/* enc key length */
-+			"authenticationkey20benckeyis16_bytes",
-+		.klen	= 8 + 20 + 16,
-+		.iv	= "iv0123456789abcd",
-+		.input	= "285 bytes plaintext285 bytes plaintext285 bytes"
-+			" plaintext285 bytes plaintext285 bytes plaintext285"
-+			" bytes plaintext285 bytes plaintext285 bytes"
-+			" plaintext285 bytes plaintext285 bytes plaintext285"
-+			" bytes plaintext285 bytes plaintext285 bytes"
-+			" plaintext285 bytes plaintext285 bytes plaintext285"
-+			" bytes plaintext285 bytes plaintext",
-+		.ilen	= 285,
-+		.assoc	= "\x00\x01\x02\x03\x04\x05\x06\x07"
-+			"\x00\x03\x01\x01\x1d",
-+		.alen	= 13,
-+		.result = "\x80\x23\x82\x44\x14\x2a\x1d\x94\xc\xc2\x1d\xd"
-+			"\x3a\x32\x89\x4c\x57\x30\xa8\x89\x76\x46\xcc\x90"
-+			"\x1d\x88\xb8\xa6\x1a\x58\xe\x2d\xeb\x2c\xc7\x3a"
-+			"\x52\x4e\xdb\xb3\x1e\x83\x11\xf5\x3c\xce\x6e\x94"
-+			"\xd3\x26\x6a\x9a\xd\xbd\xc7\x98\xb9\xb3\x3a\x51"
-+			"\x1e\x4\x84\x8a\x8f\x54\x9a\x51\x69\x9c\xce\x31"
-+			"\x8d\x5d\x8b\xee\x5f\x70\xc\xc9\xb8\x50\x54\xf8"
-+			"\xb2\x4a\x7a\xcd\xeb\x7a\x82\x81\xc6\x41\xc8\x50"
-+			"\x91\x8d\xc8\xed\xcd\x40\x8f\x55\xd1\xec\xc9\xac"
-+			"\x15\x18\xf9\x20\xa0\xed\x18\xa1\xe3\x56\xe3\x14"
-+			"\xe5\xe8\x66\x63\x20\xed\xe4\x62\x9d\xa3\xa4\x1d"
-+			"\x81\x89\x18\xf2\x36\xae\xc8\x8a\x2b\xbc\xc3\xb8"
-+			"\x80\xf\x97\x21\x36\x39\x8\x84\x23\x18\x9e\x9c"
-+			"\x72\x32\x75\x2d\x2e\xf9\x60\xb\xe8\xcc\xd9\x74"
-+			"\x4\x1b\x8e\x99\xc1\x94\xee\xd0\xac\x4e\xfc\x7e"
-+			"\xf1\x96\xb3\xe7\x14\xb8\xf2\xc\x25\x97\x82\x6b"
-+			"\xbd\x0\x65\xab\x5c\xe3\x16\xfb\x68\xef\xea\x9d"
-+			"\xff\x44\x1d\x2a\x44\xf5\xc8\x56\x77\xb7\xbf\x13"
-+			"\xc8\x54\xdb\x92\xfe\x16\x4c\xbe\x18\xe9\xb\x8d"
-+			"\xb\xd4\x43\x58\x43\xaa\xf4\x3\x80\x97\x62\xd5"
-+			"\xdf\x3c\x28\xaa\xee\x48\x4b\x55\x41\x1b\x31\x2"
-+			"\xbe\xa0\x1c\xbd\xb7\x22\x2a\xe5\x53\x72\x73\x20"
-+			"\x44\x4f\xe6\x1\x2b\x34\x33\x11\x7d\xfb\x10\xc1"
-+			"\x66\x7c\xa6\xf4\x48\x36\x5e\x2\xda\x41\x4b\x3e"
-+			"\xe7\x80\x17\x17\xce\xf1\x3e\x6a\x8e\x26\xf3\xb7"
-+			"\x2b\x85\xd\x31\x8d\xba\x6c\x22\xb4\x28\x55\x7e"
-+			"\x2a\x9e\x26\xf1\x3d\x21\xac\x65",
-+		.rlen	= 285 + 20 + 15,
-+	}
-+};
-+
-+static struct tls_testvec tls_dec_tv_template[] = {
-+	{
-+#ifdef __LITTLE_ENDIAN
-+		.key	= "\x08\x00"		/* rta length */
-+			"\x01\x00"		/* rta type */
-+#else
-+		.key	= "\x00\x08"		/* rta length */
-+			"\x00\x01"		/* rta type */
-+#endif
-+			"\x00\x00\x00\x10"	/* enc key length */
-+			"authenticationkey20benckeyis16_bytes",
-+		.klen	= 8 + 20 + 16,
-+		.iv	= "iv0123456789abcd",
-+		.input	= "\xd5\xac\xb\xd2\xac\xad\x3f\xb1"
-+			"\x59\x79\x1e\x91\x5f\x52\x14\x9c"
-+			"\xc0\x75\xd8\x4c\x97\x0f\x07\x73"
-+			"\xdc\x89\x47\x49\x49\xcb\x30\x6b"
-+			"\x1b\x45\x23\xa1\xd0\x51\xcf\x02"
-+			"\x2e\xa8\x5d\xa0\xfe\xca\x82\x61",
-+		.ilen	= 16 + 20 + 12,
-+		.assoc	= "\x00\x01\x02\x03\x04\x05\x06\x07"
-+			"\x00\x03\x01\x00\x30",
-+		.alen	= 13,
-+		.result	= "Single block msg",
-+		.rlen	= 16,
-+	}, {
-+#ifdef __LITTLE_ENDIAN
-+		.key	= "\x08\x00"		/* rta length */
-+			"\x01\x00"		/* rta type */
-+#else
-+		.key	= "\x00\x08"		/* rta length */
-+			"\x00\x01"		/* rta type */
-+#endif
-+			"\x00\x00\x00\x10"	/* enc key length */
-+			"authenticationkey20benckeyis16_bytes",
-+		.klen	= 8 + 20 + 16,
-+		.iv	= "iv0123456789abcd",
-+		.input = "\x58\x2a\x11\xc\x86\x8e\x4b\x67"
-+			"\x2d\x16\x26\x1a\xac\x4b\xe2\x1a"
-+			"\xe9\x6a\xcc\x4d\x6f\x79\x8a\x45"
-+			"\x1f\x4e\x27\xf2\xa7\x59\xb4\x5a",
-+		.ilen	= 20 + 12,
-+		.assoc	= "\x00\x01\x02\x03\x04\x05\x06\x07"
-+			"\x00\x03\x01\x00\x20",
-+		.alen	= 13,
-+		.result	= "",
-+		.rlen	= 0,
-+	}, {
-+#ifdef __LITTLE_ENDIAN
-+		.key	= "\x08\x00"		/* rta length */
-+			"\x01\x00"		/* rta type */
-+#else
-+		.key	= "\x00\x08"		/* rta length */
-+			"\x00\x01"		/* rta type */
-+#endif
-+			"\x00\x00\x00\x10"	/* enc key length */
-+			"authenticationkey20benckeyis16_bytes",
-+		.klen	= 8 + 20 + 16,
-+		.iv	= "iv0123456789abcd",
-+		.input = "\x80\x23\x82\x44\x14\x2a\x1d\x94\xc\xc2\x1d\xd"
-+			"\x3a\x32\x89\x4c\x57\x30\xa8\x89\x76\x46\xcc\x90"
-+			"\x1d\x88\xb8\xa6\x1a\x58\xe\x2d\xeb\x2c\xc7\x3a"
-+			"\x52\x4e\xdb\xb3\x1e\x83\x11\xf5\x3c\xce\x6e\x94"
-+			"\xd3\x26\x6a\x9a\xd\xbd\xc7\x98\xb9\xb3\x3a\x51"
-+			"\x1e\x4\x84\x8a\x8f\x54\x9a\x51\x69\x9c\xce\x31"
-+			"\x8d\x5d\x8b\xee\x5f\x70\xc\xc9\xb8\x50\x54\xf8"
-+			"\xb2\x4a\x7a\xcd\xeb\x7a\x82\x81\xc6\x41\xc8\x50"
-+			"\x91\x8d\xc8\xed\xcd\x40\x8f\x55\xd1\xec\xc9\xac"
-+			"\x15\x18\xf9\x20\xa0\xed\x18\xa1\xe3\x56\xe3\x14"
-+			"\xe5\xe8\x66\x63\x20\xed\xe4\x62\x9d\xa3\xa4\x1d"
-+			"\x81\x89\x18\xf2\x36\xae\xc8\x8a\x2b\xbc\xc3\xb8"
-+			"\x80\xf\x97\x21\x36\x39\x8\x84\x23\x18\x9e\x9c"
-+			"\x72\x32\x75\x2d\x2e\xf9\x60\xb\xe8\xcc\xd9\x74"
-+			"\x4\x1b\x8e\x99\xc1\x94\xee\xd0\xac\x4e\xfc\x7e"
-+			"\xf1\x96\xb3\xe7\x14\xb8\xf2\xc\x25\x97\x82\x6b"
-+			"\xbd\x0\x65\xab\x5c\xe3\x16\xfb\x68\xef\xea\x9d"
-+			"\xff\x44\x1d\x2a\x44\xf5\xc8\x56\x77\xb7\xbf\x13"
-+			"\xc8\x54\xdb\x92\xfe\x16\x4c\xbe\x18\xe9\xb\x8d"
-+			"\xb\xd4\x43\x58\x43\xaa\xf4\x3\x80\x97\x62\xd5"
-+			"\xdf\x3c\x28\xaa\xee\x48\x4b\x55\x41\x1b\x31\x2"
-+			"\xbe\xa0\x1c\xbd\xb7\x22\x2a\xe5\x53\x72\x73\x20"
-+			"\x44\x4f\xe6\x1\x2b\x34\x33\x11\x7d\xfb\x10\xc1"
-+			"\x66\x7c\xa6\xf4\x48\x36\x5e\x2\xda\x41\x4b\x3e"
-+			"\xe7\x80\x17\x17\xce\xf1\x3e\x6a\x8e\x26\xf3\xb7"
-+			"\x2b\x85\xd\x31\x8d\xba\x6c\x22\xb4\x28\x55\x7e"
-+			"\x2a\x9e\x26\xf1\x3d\x21\xac\x65",
-+
-+		.ilen	= 285 + 20 + 15,
-+		.assoc	= "\x00\x01\x02\x03\x04\x05\x06\x07"
-+			"\x00\x03\x01\x01\x40",
-+		.alen	= 13,
-+		.result	= "285 bytes plaintext285 bytes plaintext285 bytes"
-+			" plaintext285 bytes plaintext285 bytes plaintext285"
-+			" bytes plaintext285 bytes plaintext285 bytes"
-+			" plaintext285 bytes plaintext285 bytes plaintext285"
-+			" bytes plaintext285 bytes plaintext285 bytes"
-+			" plaintext285 bytes plaintext285 bytes plaintext",
-+		.rlen	= 285,
-+	}
-+};
-+
-+/*
-  * RSA test vectors. Borrowed from openSSL.
-  */
- static const struct akcipher_testvec rsa_tv_template[] = {
---- /dev/null
-+++ b/crypto/tls.c
-@@ -0,0 +1,607 @@
-+/*
-+ * Copyright 2013 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the Free
-+ * Software Foundation; either version 2 of the License, or (at your option)
-+ * any later version.
-+ *
-+ */
-+
-+#include <crypto/internal/aead.h>
-+#include <crypto/internal/hash.h>
-+#include <crypto/internal/skcipher.h>
-+#include <crypto/authenc.h>
-+#include <crypto/null.h>
-+#include <crypto/scatterwalk.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/rtnetlink.h>
-+
-+struct tls_instance_ctx {
-+	struct crypto_ahash_spawn auth;
-+	struct crypto_skcipher_spawn enc;
-+};
-+
-+struct crypto_tls_ctx {
-+	unsigned int reqoff;
-+	struct crypto_ahash *auth;
-+	struct crypto_skcipher *enc;
-+	struct crypto_sync_skcipher *null;
-+};
-+
-+struct tls_request_ctx {
-+	/*
-+	 * cryptlen holds the payload length in the case of encryption or
-+	 * payload_len + icv_len + padding_len in case of decryption
-+	 */
-+	unsigned int cryptlen;
-+	/* working space for partial results */
-+	struct scatterlist tmp[2];
-+	struct scatterlist cipher[2];
-+	struct scatterlist dst[2];
-+	char tail[];
-+};
-+
-+struct async_op {
-+	struct completion completion;
-+	int err;
-+};
-+
-+static void tls_async_op_done(struct crypto_async_request *req, int err)
-+{
-+	struct async_op *areq = req->data;
-+
-+	if (err == -EINPROGRESS)
-+		return;
-+
-+	areq->err = err;
-+	complete(&areq->completion);
-+}
-+
-+static int crypto_tls_setkey(struct crypto_aead *tls, const u8 *key,
-+			     unsigned int keylen)
-+{
-+	struct crypto_tls_ctx *ctx = crypto_aead_ctx(tls);
-+	struct crypto_ahash *auth = ctx->auth;
-+	struct crypto_skcipher *enc = ctx->enc;
-+	struct crypto_authenc_keys keys;
-+	int err = -EINVAL;
-+
-+	if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
-+		goto badkey;
-+
-+	crypto_ahash_clear_flags(auth, CRYPTO_TFM_REQ_MASK);
-+	crypto_ahash_set_flags(auth, crypto_aead_get_flags(tls) &
-+				    CRYPTO_TFM_REQ_MASK);
-+	err = crypto_ahash_setkey(auth, keys.authkey, keys.authkeylen);
-+	crypto_aead_set_flags(tls, crypto_ahash_get_flags(auth) &
-+				       CRYPTO_TFM_RES_MASK);
-+
-+	if (err)
-+		goto out;
-+
-+	crypto_skcipher_clear_flags(enc, CRYPTO_TFM_REQ_MASK);
-+	crypto_skcipher_set_flags(enc, crypto_aead_get_flags(tls) &
-+					 CRYPTO_TFM_REQ_MASK);
-+	err = crypto_skcipher_setkey(enc, keys.enckey, keys.enckeylen);
-+	crypto_aead_set_flags(tls, crypto_skcipher_get_flags(enc) &
-+				       CRYPTO_TFM_RES_MASK);
-+
-+out:
-+	return err;
-+
-+badkey:
-+	crypto_aead_set_flags(tls, CRYPTO_TFM_RES_BAD_KEY_LEN);
-+	goto out;
-+}
-+
-+/**
-+ * crypto_tls_genicv - Calculate hmac digest for a TLS record
-+ * @hash:	(output) buffer to save the digest into
-+ * @src:	(input) scatterlist with the assoc and payload data
-+ * @srclen:	(input) size of the source buffer (assoclen + cryptlen)
-+ * @req:	(input) aead request
-+ **/
-+static int crypto_tls_genicv(u8 *hash, struct scatterlist *src,
-+			     unsigned int srclen, struct aead_request *req)
-+{
-+	struct crypto_aead *tls = crypto_aead_reqtfm(req);
-+	struct crypto_tls_ctx *ctx = crypto_aead_ctx(tls);
-+	struct tls_request_ctx *treq_ctx = aead_request_ctx(req);
-+	struct async_op ahash_op;
-+	struct ahash_request *ahreq = (void *)(treq_ctx->tail + ctx->reqoff);
-+	unsigned int flags = CRYPTO_TFM_REQ_MAY_SLEEP;
-+	int err = -EBADMSG;
-+
-+	 /* Bail out if the request assoc len is 0 */
-+	if (!req->assoclen)
-+		return err;
-+
-+	init_completion(&ahash_op.completion);
-+
-+	/* the hash transform to be executed comes from the original request */
-+	ahash_request_set_tfm(ahreq, ctx->auth);
-+	/* prepare the hash request with input data and result pointer */
-+	ahash_request_set_crypt(ahreq, src, hash, srclen);
-+	/* set the notifier for when the async hash function returns */
-+	ahash_request_set_callback(ahreq, aead_request_flags(req) & flags,
-+				   tls_async_op_done, &ahash_op);
-+
-+	/* Calculate the digest on the given data. The result is put in hash */
-+	err = crypto_ahash_digest(ahreq);
-+	if (err == -EINPROGRESS) {
-+		err = wait_for_completion_interruptible(&ahash_op.completion);
-+		if (!err)
-+			err = ahash_op.err;
-+	}
-+
-+	return err;
-+}
-+
-+/**
-+ * crypto_tls_gen_padicv - Calculate and pad hmac digest for a TLS record
-+ * @hash:	(output) buffer to save the digest and padding into
-+ * @phashlen:	(output) the size of digest + padding
-+ * @req:	(input) aead request
-+ **/
-+static int crypto_tls_gen_padicv(u8 *hash, unsigned int *phashlen,
-+				 struct aead_request *req)
-+{
-+	struct crypto_aead *tls = crypto_aead_reqtfm(req);
-+	unsigned int hash_size = crypto_aead_authsize(tls);
-+	unsigned int block_size = crypto_aead_blocksize(tls);
-+	unsigned int srclen = req->cryptlen + hash_size;
-+	unsigned int icvlen = req->cryptlen + req->assoclen;
-+	unsigned int padlen;
-+	int err;
-+
-+	err = crypto_tls_genicv(hash, req->src, icvlen, req);
-+	if (err)
-+		goto out;
-+
-+	/* add padding after digest */
-+	padlen = block_size - (srclen % block_size);
-+	memset(hash + hash_size, padlen - 1, padlen);
-+
-+	*phashlen = hash_size + padlen;
-+out:
-+	return err;
-+}
-+
-+static int crypto_tls_copy_data(struct aead_request *req,
-+				struct scatterlist *src,
-+				struct scatterlist *dst,
-+				unsigned int len)
-+{
-+	struct crypto_aead *tls = crypto_aead_reqtfm(req);
-+	struct crypto_tls_ctx *ctx = crypto_aead_ctx(tls);
-+	SYNC_SKCIPHER_REQUEST_ON_STACK(skreq, ctx->null);
-+
-+	skcipher_request_set_sync_tfm(skreq, ctx->null);
-+	skcipher_request_set_callback(skreq, aead_request_flags(req),
-+				      NULL, NULL);
-+	skcipher_request_set_crypt(skreq, src, dst, len, NULL);
-+
-+	return crypto_skcipher_encrypt(skreq);
-+}
-+
-+static int crypto_tls_encrypt(struct aead_request *req)
-+{
-+	struct crypto_aead *tls = crypto_aead_reqtfm(req);
-+	struct crypto_tls_ctx *ctx = crypto_aead_ctx(tls);
-+	struct tls_request_ctx *treq_ctx = aead_request_ctx(req);
-+	struct skcipher_request *skreq;
-+	struct scatterlist *cipher = treq_ctx->cipher;
-+	struct scatterlist *tmp = treq_ctx->tmp;
-+	struct scatterlist *sg, *src, *dst;
-+	unsigned int cryptlen, phashlen;
-+	u8 *hash = treq_ctx->tail;
-+	int err;
-+
-+	/*
-+	 * The hash result is saved at the beginning of the tls request ctx
-+	 * and is aligned as required by the hash transform. Enough space was
-+	 * allocated in crypto_tls_init_tfm to accommodate the difference. The
-+	 * requests themselves start later at treq_ctx->tail + ctx->reqoff so
-+	 * the result is not overwritten by the second (cipher) request.
-+	 */
-+	hash = (u8 *)ALIGN((unsigned long)hash +
-+			   crypto_ahash_alignmask(ctx->auth),
-+			   crypto_ahash_alignmask(ctx->auth) + 1);
-+
-+	/*
-+	 * STEP 1: create ICV together with necessary padding
-+	 */
-+	err = crypto_tls_gen_padicv(hash, &phashlen, req);
-+	if (err)
-+		return err;
-+
-+	/*
-+	 * STEP 2: Hash and padding are combined with the payload
-+	 * depending on the form it arrives. Scatter tables must have at least
-+	 * one page of data before chaining with another table and can't have
-+	 * an empty data page. The following code addresses these requirements.
-+	 *
-+	 * If the payload is empty, only the hash is encrypted, otherwise the
-+	 * payload scatterlist is merged with the hash. A special merging case
-+	 * is when the payload has only one page of data. In that case the
-+	 * payload page is moved to another scatterlist and prepared there for
-+	 * encryption.
-+	 */
-+	if (req->cryptlen) {
-+		src = scatterwalk_ffwd(tmp, req->src, req->assoclen);
-+
-+		sg_init_table(cipher, 2);
-+		sg_set_buf(cipher + 1, hash, phashlen);
-+
-+		if (sg_is_last(src)) {
-+			sg_set_page(cipher, sg_page(src), req->cryptlen,
-+				    src->offset);
-+			src = cipher;
-+		} else {
-+			unsigned int rem_len = req->cryptlen;
-+
-+			for (sg = src; rem_len > sg->length; sg = sg_next(sg))
-+				rem_len -= min(rem_len, sg->length);
-+
-+			sg_set_page(cipher, sg_page(sg), rem_len, sg->offset);
-+			sg_chain(sg, 1, cipher);
-+		}
-+	} else {
-+		sg_init_one(cipher, hash, phashlen);
-+		src = cipher;
-+	}
-+
-+	/**
-+	 * If src != dst copy the associated data from source to destination.
-+	 * In both cases fast-forward passed the associated data in the dest.
-+	 */
-+	if (req->src != req->dst) {
-+		err = crypto_tls_copy_data(req, req->src, req->dst,
-+					   req->assoclen);
-+		if (err)
-+			return err;
-+	}
-+	dst = scatterwalk_ffwd(treq_ctx->dst, req->dst, req->assoclen);
-+
-+	/*
-+	 * STEP 3: encrypt the frame and return the result
-+	 */
-+	cryptlen = req->cryptlen + phashlen;
-+
-+	/*
-+	 * The hash and the cipher are applied at different times and their
-+	 * requests can use the same memory space without interference
-+	 */
-+	skreq = (void *)(treq_ctx->tail + ctx->reqoff);
-+	skcipher_request_set_tfm(skreq, ctx->enc);
-+	skcipher_request_set_crypt(skreq, src, dst, cryptlen, req->iv);
-+	skcipher_request_set_callback(skreq, aead_request_flags(req),
-+				      req->base.complete, req->base.data);
-+	/*
-+	 * Apply the cipher transform. The result will be in req->dst when the
-+	 * asynchronuous call terminates
-+	 */
-+	err = crypto_skcipher_encrypt(skreq);
-+
-+	return err;
-+}
-+
-+static int crypto_tls_decrypt(struct aead_request *req)
-+{
-+	struct crypto_aead *tls = crypto_aead_reqtfm(req);
-+	struct crypto_tls_ctx *ctx = crypto_aead_ctx(tls);
-+	struct tls_request_ctx *treq_ctx = aead_request_ctx(req);
-+	unsigned int cryptlen = req->cryptlen;
-+	unsigned int hash_size = crypto_aead_authsize(tls);
-+	unsigned int block_size = crypto_aead_blocksize(tls);
-+	struct skcipher_request *skreq = (void *)(treq_ctx->tail + ctx->reqoff);
-+	struct scatterlist *tmp = treq_ctx->tmp;
-+	struct scatterlist *src, *dst;
-+
-+	u8 padding[255]; /* padding can be 0-255 bytes */
-+	u8 pad_size;
-+	u16 *len_field;
-+	u8 *ihash, *hash = treq_ctx->tail;
-+
-+	int paderr = 0;
-+	int err = -EINVAL;
-+	int i;
-+	struct async_op ciph_op;
-+
-+	/*
-+	 * Rule out bad packets. The input packet length must be at least one
-+	 * byte more than the hash_size
-+	 */
-+	if (cryptlen <= hash_size || cryptlen % block_size)
-+		goto out;
-+
-+	/*
-+	 * Step 1 - Decrypt the source. Fast-forward past the associated data
-+	 * to the encrypted data. The result will be overwritten in place so
-+	 * that the decrypted data will be adjacent to the associated data. The
-+	 * last step (computing the hash) will have it's input data already
-+	 * prepared and ready to be accessed at req->src.
-+	 */
-+	src = scatterwalk_ffwd(tmp, req->src, req->assoclen);
-+	dst = src;
-+
-+	init_completion(&ciph_op.completion);
-+	skcipher_request_set_tfm(skreq, ctx->enc);
-+	skcipher_request_set_callback(skreq, aead_request_flags(req),
-+				      tls_async_op_done, &ciph_op);
-+	skcipher_request_set_crypt(skreq, src, dst, cryptlen, req->iv);
-+	err = crypto_skcipher_decrypt(skreq);
-+	if (err == -EINPROGRESS) {
-+		err = wait_for_completion_interruptible(&ciph_op.completion);
-+		if (!err)
-+			err = ciph_op.err;
-+	}
-+	if (err)
-+		goto out;
-+
-+	/*
-+	 * Step 2 - Verify padding
-+	 * Retrieve the last byte of the payload; this is the padding size.
-+	 */
-+	cryptlen -= 1;
-+	scatterwalk_map_and_copy(&pad_size, dst, cryptlen, 1, 0);
-+
-+	/* RFC recommendation for invalid padding size. */
-+	if (cryptlen < pad_size + hash_size) {
-+		pad_size = 0;
-+		paderr = -EBADMSG;
-+	}
-+	cryptlen -= pad_size;
-+	scatterwalk_map_and_copy(padding, dst, cryptlen, pad_size, 0);
-+
-+	/* Padding content must be equal with pad_size. We verify it all */
-+	for (i = 0; i < pad_size; i++)
-+		if (padding[i] != pad_size)
-+			paderr = -EBADMSG;
-+
-+	/*
-+	 * Step 3 - Verify hash
-+	 * Align the digest result as required by the hash transform. Enough
-+	 * space was allocated in crypto_tls_init_tfm
-+	 */
-+	hash = (u8 *)ALIGN((unsigned long)hash +
-+			   crypto_ahash_alignmask(ctx->auth),
-+			   crypto_ahash_alignmask(ctx->auth) + 1);
-+	/*
-+	 * Two bytes at the end of the associated data make the length field.
-+	 * It must be updated with the length of the cleartext message before
-+	 * the hash is calculated.
-+	 */
-+	len_field = sg_virt(req->src) + req->assoclen - 2;
-+	cryptlen -= hash_size;
-+	*len_field = htons(cryptlen);
-+
-+	/* This is the hash from the decrypted packet. Save it for later */
-+	ihash = hash + hash_size;
-+	scatterwalk_map_and_copy(ihash, dst, cryptlen, hash_size, 0);
-+
-+	/* Now compute and compare our ICV with the one from the packet */
-+	err = crypto_tls_genicv(hash, req->src, cryptlen + req->assoclen, req);
-+	if (!err)
-+		err = memcmp(hash, ihash, hash_size) ? -EBADMSG : 0;
-+
-+	if (req->src != req->dst) {
-+		err = crypto_tls_copy_data(req, req->src, req->dst, cryptlen +
-+					   req->assoclen);
-+		if (err)
-+			goto out;
-+	}
-+
-+	/* return the first found error */
-+	if (paderr)
-+		err = paderr;
-+
-+out:
-+	aead_request_complete(req, err);
-+	return err;
-+}
-+
-+static int crypto_tls_init_tfm(struct crypto_aead *tfm)
-+{
-+	struct aead_instance *inst = aead_alg_instance(tfm);
-+	struct tls_instance_ctx *ictx = aead_instance_ctx(inst);
-+	struct crypto_tls_ctx *ctx = crypto_aead_ctx(tfm);
-+	struct crypto_ahash *auth;
-+	struct crypto_skcipher *enc;
-+	struct crypto_sync_skcipher *null;
-+	int err;
-+
-+	auth = crypto_spawn_ahash(&ictx->auth);
-+	if (IS_ERR(auth))
-+		return PTR_ERR(auth);
-+
-+	enc = crypto_spawn_skcipher(&ictx->enc);
-+	err = PTR_ERR(enc);
-+	if (IS_ERR(enc))
-+		goto err_free_ahash;
-+
-+	null = crypto_get_default_null_skcipher();
-+	err = PTR_ERR(null);
-+	if (IS_ERR(null))
-+		goto err_free_skcipher;
-+
-+	ctx->auth = auth;
-+	ctx->enc = enc;
-+	ctx->null = null;
-+
-+	/*
-+	 * Allow enough space for two digests. The two digests will be compared
-+	 * during the decryption phase. One will come from the decrypted packet
-+	 * and the other will be calculated. For encryption, one digest is
-+	 * padded (up to a cipher blocksize) and chained with the payload
-+	 */
-+	ctx->reqoff = ALIGN(crypto_ahash_digestsize(auth) +
-+			    crypto_ahash_alignmask(auth),
-+			    crypto_ahash_alignmask(auth) + 1) +
-+			    max(crypto_ahash_digestsize(auth),
-+				crypto_skcipher_blocksize(enc));
-+
-+	crypto_aead_set_reqsize(tfm,
-+				sizeof(struct tls_request_ctx) +
-+				ctx->reqoff +
-+				max_t(unsigned int,
-+				      crypto_ahash_reqsize(auth) +
-+				      sizeof(struct ahash_request),
-+				      crypto_skcipher_reqsize(enc) +
-+				      sizeof(struct skcipher_request)));
-+
-+	return 0;
-+
-+err_free_skcipher:
-+	crypto_free_skcipher(enc);
-+err_free_ahash:
-+	crypto_free_ahash(auth);
-+	return err;
-+}
-+
-+static void crypto_tls_exit_tfm(struct crypto_aead *tfm)
-+{
-+	struct crypto_tls_ctx *ctx = crypto_aead_ctx(tfm);
-+
-+	crypto_free_ahash(ctx->auth);
-+	crypto_free_skcipher(ctx->enc);
-+	crypto_put_default_null_skcipher();
-+}
-+
-+static void crypto_tls_free(struct aead_instance *inst)
-+{
-+	struct tls_instance_ctx *ctx = aead_instance_ctx(inst);
-+
-+	crypto_drop_skcipher(&ctx->enc);
-+	crypto_drop_ahash(&ctx->auth);
-+	kfree(inst);
-+}
-+
-+static int crypto_tls_create(struct crypto_template *tmpl, struct rtattr **tb)
-+{
-+	struct crypto_attr_type *algt;
-+	struct aead_instance *inst;
-+	struct hash_alg_common *auth;
-+	struct crypto_alg *auth_base;
-+	struct skcipher_alg *enc;
-+	struct tls_instance_ctx *ctx;
-+	const char *enc_name;
-+	int err;
-+
-+	algt = crypto_get_attr_type(tb);
-+	if (IS_ERR(algt))
-+		return PTR_ERR(algt);
-+
-+	if ((algt->type ^ CRYPTO_ALG_TYPE_AEAD) & algt->mask)
-+		return -EINVAL;
-+
-+	auth = ahash_attr_alg(tb[1], CRYPTO_ALG_TYPE_HASH,
-+			      CRYPTO_ALG_TYPE_AHASH_MASK |
-+			      crypto_requires_sync(algt->type, algt->mask));
-+	if (IS_ERR(auth))
-+		return PTR_ERR(auth);
-+
-+	auth_base = &auth->base;
-+
-+	enc_name = crypto_attr_alg_name(tb[2]);
-+	err = PTR_ERR(enc_name);
-+	if (IS_ERR(enc_name))
-+		goto out_put_auth;
-+
-+	inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL);
-+	err = -ENOMEM;
-+	if (!inst)
-+		goto out_put_auth;
-+
-+	ctx = aead_instance_ctx(inst);
-+
-+	err = crypto_init_ahash_spawn(&ctx->auth, auth,
-+				      aead_crypto_instance(inst));
-+	if (err)
-+		goto err_free_inst;
-+
-+	crypto_set_skcipher_spawn(&ctx->enc, aead_crypto_instance(inst));
-+	err = crypto_grab_skcipher(&ctx->enc, enc_name, 0,
-+				   crypto_requires_sync(algt->type,
-+							algt->mask));
-+	if (err)
-+		goto err_drop_auth;
-+
-+	enc = crypto_spawn_skcipher_alg(&ctx->enc);
-+
-+	err = -ENAMETOOLONG;
-+	if (snprintf(inst->alg.base.cra_name, CRYPTO_MAX_ALG_NAME,
-+		     "tls10(%s,%s)", auth_base->cra_name,
-+		     enc->base.cra_name) >= CRYPTO_MAX_ALG_NAME)
-+		goto err_drop_enc;
-+
-+	if (snprintf(inst->alg.base.cra_driver_name, CRYPTO_MAX_ALG_NAME,
-+		     "tls10(%s,%s)", auth_base->cra_driver_name,
-+		     enc->base.cra_driver_name) >= CRYPTO_MAX_ALG_NAME)
-+		goto err_drop_enc;
-+
-+	inst->alg.base.cra_flags = (auth_base->cra_flags |
-+					enc->base.cra_flags) & CRYPTO_ALG_ASYNC;
-+	inst->alg.base.cra_priority = enc->base.cra_priority * 10 +
-+					auth_base->cra_priority;
-+	inst->alg.base.cra_blocksize = enc->base.cra_blocksize;
-+	inst->alg.base.cra_alignmask = auth_base->cra_alignmask |
-+					enc->base.cra_alignmask;
-+	inst->alg.base.cra_ctxsize = sizeof(struct crypto_tls_ctx);
-+
-+	inst->alg.ivsize = crypto_skcipher_alg_ivsize(enc);
-+	inst->alg.chunksize = crypto_skcipher_alg_chunksize(enc);
-+	inst->alg.maxauthsize = auth->digestsize;
-+
-+	inst->alg.init = crypto_tls_init_tfm;
-+	inst->alg.exit = crypto_tls_exit_tfm;
-+
-+	inst->alg.setkey = crypto_tls_setkey;
-+	inst->alg.encrypt = crypto_tls_encrypt;
-+	inst->alg.decrypt = crypto_tls_decrypt;
-+
-+	inst->free = crypto_tls_free;
-+
-+	err = aead_register_instance(tmpl, inst);
-+	if (err)
-+		goto err_drop_enc;
-+
-+out:
-+	crypto_mod_put(auth_base);
-+	return err;
-+
-+err_drop_enc:
-+	crypto_drop_skcipher(&ctx->enc);
-+err_drop_auth:
-+	crypto_drop_ahash(&ctx->auth);
-+err_free_inst:
-+	kfree(inst);
-+out_put_auth:
-+	goto out;
-+}
-+
-+static struct crypto_template crypto_tls_tmpl = {
-+	.name = "tls10",
-+	.create = crypto_tls_create,
-+	.module = THIS_MODULE,
-+};
-+
-+static int __init crypto_tls_module_init(void)
-+{
-+	return crypto_register_template(&crypto_tls_tmpl);
-+}
-+
-+static void __exit crypto_tls_module_exit(void)
-+{
-+	crypto_unregister_template(&crypto_tls_tmpl);
-+}
-+
-+module_init(crypto_tls_module_init);
-+module_exit(crypto_tls_module_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("TLS 1.0 record encryption");
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0002-crypto-tcrypt-include-rsa-test.patch b/target/linux/layerscape/patches-5.4/804-crypto-0002-crypto-tcrypt-include-rsa-test.patch
deleted file mode 100644
index 5be1e051a9..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0002-crypto-tcrypt-include-rsa-test.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From c579c23d57c0ef7c832cf0844c86c7be42c197d3 Mon Sep 17 00:00:00 2001
-From: Radu Alexe <radu.alexe@nxp.com>
-Date: Thu, 13 Apr 2017 09:36:32 +0300
-Subject: [PATCH] crypto: tcrypt - include rsa test
-
-Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
-Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
----
- crypto/tcrypt.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/crypto/tcrypt.c
-+++ b/crypto/tcrypt.c
-@@ -71,9 +71,8 @@ static char *check[] = {
- 	"cast6", "arc4", "michael_mic", "deflate", "crc32c", "tea", "xtea",
- 	"khazad", "wp512", "wp384", "wp256", "tnepres", "xeta",  "fcrypt",
- 	"camellia", "seed", "salsa20", "rmd128", "rmd160", "rmd256", "rmd320",
--	"lzo", "lzo-rle", "cts", "sha3-224", "sha3-256", "sha3-384",
--	"sha3-512", "streebog256", "streebog512",
--	NULL
-+	"lzo", "lzo-rle", "cts", "zlib", "sha3-224", "sha3-256", "sha3-384",
-+	"sha3-512", "streebog256", "streebog512", "rsa", NULL
- };
- 
- static u32 block_sizes[] = { 16, 64, 256, 1024, 1472, 8192, 0 };
-@@ -1983,6 +1982,10 @@ static int do_test(const char *alg, u32
- 		ret += tcrypt_test("hmac(streebog512)");
- 		break;
- 
-+	case 117:
-+		ret += tcrypt_test("rsa");
-+		break;
-+
- 	case 150:
- 		ret += tcrypt_test("ansi_cprng");
- 		break;
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0003-crypto-caam-use-mapped_-src-dst-_nents-for-descripto.patch b/target/linux/layerscape/patches-5.4/804-crypto-0003-crypto-caam-use-mapped_-src-dst-_nents-for-descripto.patch
deleted file mode 100644
index 4e1efc858b..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0003-crypto-caam-use-mapped_-src-dst-_nents-for-descripto.patch
+++ /dev/null
@@ -1,227 +0,0 @@
-From e640f4bcfa0088ff696bc5da6063a1ea8d782189 Mon Sep 17 00:00:00 2001
-From: Iuliana Prodan <iuliana.prodan@nxp.com>
-Date: Thu, 26 Sep 2019 15:26:29 +0300
-Subject: [PATCH] crypto: caam - use mapped_{src,dst}_nents for descriptor
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The mapped_{src,dst}_nents _returned_ from the dma_map_sg
-call (which could be less than src/dst_nents) have to be
-used to generate the job descriptors.
-
-Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
-Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-(cherry picked from commit eff9771d51529acf7f6f58a60b2923b98da28f0e)
----
- drivers/crypto/caam/caampkc.c | 72 +++++++++++++++++++++++--------------------
- drivers/crypto/caam/caampkc.h |  8 +++--
- 2 files changed, 45 insertions(+), 35 deletions(-)
-
---- a/drivers/crypto/caam/caampkc.c
-+++ b/drivers/crypto/caam/caampkc.c
-@@ -252,9 +252,9 @@ static struct rsa_edesc *rsa_edesc_alloc
- 	gfp_t flags = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
- 		       GFP_KERNEL : GFP_ATOMIC;
- 	int sg_flags = (flags == GFP_ATOMIC) ? SG_MITER_ATOMIC : 0;
--	int sgc;
- 	int sec4_sg_index, sec4_sg_len = 0, sec4_sg_bytes;
- 	int src_nents, dst_nents;
-+	int mapped_src_nents, mapped_dst_nents;
- 	unsigned int diff_size = 0;
- 	int lzeros;
- 
-@@ -285,13 +285,27 @@ static struct rsa_edesc *rsa_edesc_alloc
- 				     req_ctx->fixup_src_len);
- 	dst_nents = sg_nents_for_len(req->dst, req->dst_len);
- 
--	if (!diff_size && src_nents == 1)
-+	mapped_src_nents = dma_map_sg(dev, req_ctx->fixup_src, src_nents,
-+				      DMA_TO_DEVICE);
-+	if (unlikely(!mapped_src_nents)) {
-+		dev_err(dev, "unable to map source\n");
-+		return ERR_PTR(-ENOMEM);
-+	}
-+	mapped_dst_nents = dma_map_sg(dev, req->dst, dst_nents,
-+				      DMA_FROM_DEVICE);
-+	if (unlikely(!mapped_dst_nents)) {
-+		dev_err(dev, "unable to map destination\n");
-+		goto src_fail;
-+	}
-+
-+	if (!diff_size && mapped_src_nents == 1)
- 		sec4_sg_len = 0; /* no need for an input hw s/g table */
- 	else
--		sec4_sg_len = src_nents + !!diff_size;
-+		sec4_sg_len = mapped_src_nents + !!diff_size;
- 	sec4_sg_index = sec4_sg_len;
--	if (dst_nents > 1)
--		sec4_sg_len += pad_sg_nents(dst_nents);
-+
-+	if (mapped_dst_nents > 1)
-+		sec4_sg_len += pad_sg_nents(mapped_dst_nents);
- 	else
- 		sec4_sg_len = pad_sg_nents(sec4_sg_len);
- 
-@@ -301,19 +315,7 @@ static struct rsa_edesc *rsa_edesc_alloc
- 	edesc = kzalloc(sizeof(*edesc) + desclen + sec4_sg_bytes,
- 			GFP_DMA | flags);
- 	if (!edesc)
--		return ERR_PTR(-ENOMEM);
--
--	sgc = dma_map_sg(dev, req_ctx->fixup_src, src_nents, DMA_TO_DEVICE);
--	if (unlikely(!sgc)) {
--		dev_err(dev, "unable to map source\n");
--		goto src_fail;
--	}
--
--	sgc = dma_map_sg(dev, req->dst, dst_nents, DMA_FROM_DEVICE);
--	if (unlikely(!sgc)) {
--		dev_err(dev, "unable to map destination\n");
- 		goto dst_fail;
--	}
- 
- 	edesc->sec4_sg = (void *)edesc + sizeof(*edesc) + desclen;
- 	if (diff_size)
-@@ -324,7 +326,7 @@ static struct rsa_edesc *rsa_edesc_alloc
- 		sg_to_sec4_sg_last(req_ctx->fixup_src, req_ctx->fixup_src_len,
- 				   edesc->sec4_sg + !!diff_size, 0);
- 
--	if (dst_nents > 1)
-+	if (mapped_dst_nents > 1)
- 		sg_to_sec4_sg_last(req->dst, req->dst_len,
- 				   edesc->sec4_sg + sec4_sg_index, 0);
- 
-@@ -335,6 +337,9 @@ static struct rsa_edesc *rsa_edesc_alloc
- 	if (!sec4_sg_bytes)
- 		return edesc;
- 
-+	edesc->mapped_src_nents = mapped_src_nents;
-+	edesc->mapped_dst_nents = mapped_dst_nents;
-+
- 	edesc->sec4_sg_dma = dma_map_single(dev, edesc->sec4_sg,
- 					    sec4_sg_bytes, DMA_TO_DEVICE);
- 	if (dma_mapping_error(dev, edesc->sec4_sg_dma)) {
-@@ -351,11 +356,11 @@ static struct rsa_edesc *rsa_edesc_alloc
- 	return edesc;
- 
- sec4_sg_fail:
--	dma_unmap_sg(dev, req->dst, dst_nents, DMA_FROM_DEVICE);
-+	kfree(edesc);
- dst_fail:
--	dma_unmap_sg(dev, req_ctx->fixup_src, src_nents, DMA_TO_DEVICE);
-+	dma_unmap_sg(dev, req->dst, dst_nents, DMA_FROM_DEVICE);
- src_fail:
--	kfree(edesc);
-+	dma_unmap_sg(dev, req_ctx->fixup_src, src_nents, DMA_TO_DEVICE);
- 	return ERR_PTR(-ENOMEM);
- }
- 
-@@ -383,15 +388,15 @@ static int set_rsa_pub_pdb(struct akciph
- 		return -ENOMEM;
- 	}
- 
--	if (edesc->src_nents > 1) {
-+	if (edesc->mapped_src_nents > 1) {
- 		pdb->sgf |= RSA_PDB_SGF_F;
- 		pdb->f_dma = edesc->sec4_sg_dma;
--		sec4_sg_index += edesc->src_nents;
-+		sec4_sg_index += edesc->mapped_src_nents;
- 	} else {
- 		pdb->f_dma = sg_dma_address(req_ctx->fixup_src);
- 	}
- 
--	if (edesc->dst_nents > 1) {
-+	if (edesc->mapped_dst_nents > 1) {
- 		pdb->sgf |= RSA_PDB_SGF_G;
- 		pdb->g_dma = edesc->sec4_sg_dma +
- 			     sec4_sg_index * sizeof(struct sec4_sg_entry);
-@@ -428,17 +433,18 @@ static int set_rsa_priv_f1_pdb(struct ak
- 		return -ENOMEM;
- 	}
- 
--	if (edesc->src_nents > 1) {
-+	if (edesc->mapped_src_nents > 1) {
- 		pdb->sgf |= RSA_PRIV_PDB_SGF_G;
- 		pdb->g_dma = edesc->sec4_sg_dma;
--		sec4_sg_index += edesc->src_nents;
-+		sec4_sg_index += edesc->mapped_src_nents;
-+
- 	} else {
- 		struct caam_rsa_req_ctx *req_ctx = akcipher_request_ctx(req);
- 
- 		pdb->g_dma = sg_dma_address(req_ctx->fixup_src);
- 	}
- 
--	if (edesc->dst_nents > 1) {
-+	if (edesc->mapped_dst_nents > 1) {
- 		pdb->sgf |= RSA_PRIV_PDB_SGF_F;
- 		pdb->f_dma = edesc->sec4_sg_dma +
- 			     sec4_sg_index * sizeof(struct sec4_sg_entry);
-@@ -493,17 +499,17 @@ static int set_rsa_priv_f2_pdb(struct ak
- 		goto unmap_tmp1;
- 	}
- 
--	if (edesc->src_nents > 1) {
-+	if (edesc->mapped_src_nents > 1) {
- 		pdb->sgf |= RSA_PRIV_PDB_SGF_G;
- 		pdb->g_dma = edesc->sec4_sg_dma;
--		sec4_sg_index += edesc->src_nents;
-+		sec4_sg_index += edesc->mapped_src_nents;
- 	} else {
- 		struct caam_rsa_req_ctx *req_ctx = akcipher_request_ctx(req);
- 
- 		pdb->g_dma = sg_dma_address(req_ctx->fixup_src);
- 	}
- 
--	if (edesc->dst_nents > 1) {
-+	if (edesc->mapped_dst_nents > 1) {
- 		pdb->sgf |= RSA_PRIV_PDB_SGF_F;
- 		pdb->f_dma = edesc->sec4_sg_dma +
- 			     sec4_sg_index * sizeof(struct sec4_sg_entry);
-@@ -582,17 +588,17 @@ static int set_rsa_priv_f3_pdb(struct ak
- 		goto unmap_tmp1;
- 	}
- 
--	if (edesc->src_nents > 1) {
-+	if (edesc->mapped_src_nents > 1) {
- 		pdb->sgf |= RSA_PRIV_PDB_SGF_G;
- 		pdb->g_dma = edesc->sec4_sg_dma;
--		sec4_sg_index += edesc->src_nents;
-+		sec4_sg_index += edesc->mapped_src_nents;
- 	} else {
- 		struct caam_rsa_req_ctx *req_ctx = akcipher_request_ctx(req);
- 
- 		pdb->g_dma = sg_dma_address(req_ctx->fixup_src);
- 	}
- 
--	if (edesc->dst_nents > 1) {
-+	if (edesc->mapped_dst_nents > 1) {
- 		pdb->sgf |= RSA_PRIV_PDB_SGF_F;
- 		pdb->f_dma = edesc->sec4_sg_dma +
- 			     sec4_sg_index * sizeof(struct sec4_sg_entry);
---- a/drivers/crypto/caam/caampkc.h
-+++ b/drivers/crypto/caam/caampkc.h
-@@ -112,8 +112,10 @@ struct caam_rsa_req_ctx {
- 
- /**
-  * rsa_edesc - s/w-extended rsa descriptor
-- * @src_nents     : number of segments in input scatterlist
-- * @dst_nents     : number of segments in output scatterlist
-+ * @src_nents     : number of segments in input s/w scatterlist
-+ * @dst_nents     : number of segments in output s/w scatterlist
-+ * @mapped_src_nents: number of segments in input h/w link table
-+ * @mapped_dst_nents: number of segments in output h/w link table
-  * @sec4_sg_bytes : length of h/w link table
-  * @sec4_sg_dma   : dma address of h/w link table
-  * @sec4_sg       : pointer to h/w link table
-@@ -123,6 +125,8 @@ struct caam_rsa_req_ctx {
- struct rsa_edesc {
- 	int src_nents;
- 	int dst_nents;
-+	int mapped_src_nents;
-+	int mapped_dst_nents;
- 	int sec4_sg_bytes;
- 	dma_addr_t sec4_sg_dma;
- 	struct sec4_sg_entry *sec4_sg;
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0004-crypto-caam-use-devres-to-unmap-memory.patch b/target/linux/layerscape/patches-5.4/804-crypto-0004-crypto-caam-use-devres-to-unmap-memory.patch
deleted file mode 100644
index d85280ceb0..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0004-crypto-caam-use-devres-to-unmap-memory.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From 76087c548649ea0fae04a0538f9de12546c5c680 Mon Sep 17 00:00:00 2001
-From: Andrey Smirnov <andrew.smirnov@gmail.com>
-Date: Tue, 22 Oct 2019 08:30:08 -0700
-Subject: [PATCH] crypto: caam - use devres to unmap memory
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use devres to unmap memory and drop corresponding iounmap() call.
-
-Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
-Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
-Cc: Chris Healy <cphealy@gmail.com>
-Cc: Lucas Stach <l.stach@pengutronix.de>
-Cc: Horia Geantă <horia.geanta@nxp.com>
-Cc: Herbert Xu <herbert@gondor.apana.org.au>
-Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
-Cc: linux-crypto@vger.kernel.org
-Cc: linux-kernel@vger.kernel.org
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-(cherry picked from commit 66e93b28075d3cae568ed97ef78789afa5a6eb36)
----
- drivers/crypto/caam/ctrl.c | 28 +++++++++-------------------
- 1 file changed, 9 insertions(+), 19 deletions(-)
-
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -308,11 +308,9 @@ static int caam_remove(struct platform_d
- {
- 	struct device *ctrldev;
- 	struct caam_drv_private *ctrlpriv;
--	struct caam_ctrl __iomem *ctrl;
- 
- 	ctrldev = &pdev->dev;
- 	ctrlpriv = dev_get_drvdata(ctrldev);
--	ctrl = (struct caam_ctrl __iomem *)ctrlpriv->ctrl;
- 
- 	/* Remove platform devices under the crypto node */
- 	of_platform_depopulate(ctrldev);
-@@ -334,9 +332,6 @@ static int caam_remove(struct platform_d
- 	debugfs_remove_recursive(ctrlpriv->dfs_root);
- #endif
- 
--	/* Unmap controller region */
--	iounmap(ctrl);
--
- 	return 0;
- }
- 
-@@ -611,10 +606,11 @@ static int caam_probe(struct platform_de
- 
- 	/* Get configuration properties from device tree */
- 	/* First, get register page */
--	ctrl = of_iomap(nprop, 0);
--	if (!ctrl) {
-+	ctrl = devm_of_iomap(dev, nprop, 0, NULL);
-+	ret = PTR_ERR_OR_ZERO(ctrl);
-+	if (ret) {
- 		dev_err(dev, "caam: of_iomap() failed\n");
--		return -ENOMEM;
-+		return ret;
- 	}
- 
- 	caam_little_end = !(bool)(rd_reg32(&ctrl->perfmon.status) &
-@@ -632,22 +628,18 @@ static int caam_probe(struct platform_de
- 	if (ctrlpriv->qi_present && !caam_dpaa2) {
- 		ret = qman_is_probed();
- 		if (!ret) {
--			ret = -EPROBE_DEFER;
--			goto iounmap_ctrl;
-+			return -EPROBE_DEFER;
- 		} else if (ret < 0) {
- 			dev_err(dev, "failing probe due to qman probe error\n");
--			ret = -ENODEV;
--			goto iounmap_ctrl;
-+			return -ENODEV;
- 		}
- 
- 		ret = qman_portals_probed();
- 		if (!ret) {
--			ret = -EPROBE_DEFER;
--			goto iounmap_ctrl;
-+			return -EPROBE_DEFER;
- 		} else if (ret < 0) {
- 			dev_err(dev, "failing probe due to qman portals probe error\n");
--			ret = -ENODEV;
--			goto iounmap_ctrl;
-+			return -ENODEV;
- 		}
- 	}
- #endif
-@@ -720,7 +712,7 @@ static int caam_probe(struct platform_de
- 	ret = dma_set_mask_and_coherent(dev, caam_get_dma_mask(dev));
- 	if (ret) {
- 		dev_err(dev, "dma_set_mask_and_coherent failed (%d)\n", ret);
--		goto iounmap_ctrl;
-+		return ret;
- 	}
- 
- 	ctrlpriv->era = caam_get_era(ctrl);
-@@ -925,8 +917,6 @@ shutdown_qi:
- 	if (ctrlpriv->qi_init)
- 		caam_qi_shutdown(dev);
- #endif
--iounmap_ctrl:
--	iounmap(ctrl);
- 	return ret;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0005-crypto-caam-use-devres-to-remove-debugfs.patch b/target/linux/layerscape/patches-5.4/804-crypto-0005-crypto-caam-use-devres-to-remove-debugfs.patch
deleted file mode 100644
index ff15d95d08..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0005-crypto-caam-use-devres-to-remove-debugfs.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From 93fbe7c21a64d22ac057fc9e8eed5967f5d0bd88 Mon Sep 17 00:00:00 2001
-From: Andrey Smirnov <andrew.smirnov@gmail.com>
-Date: Tue, 22 Oct 2019 08:30:09 -0700
-Subject: [PATCH] crypto: caam - use devres to remove debugfs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use devres to remove debugfs and drop corresponding
-debugfs_remove_recursive() call.
-
-Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
-Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
-Cc: Chris Healy <cphealy@gmail.com>
-Cc: Lucas Stach <l.stach@pengutronix.de>
-Cc: Horia Geantă <horia.geanta@nxp.com>
-Cc: Herbert Xu <herbert@gondor.apana.org.au>
-Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
-Cc: linux-crypto@vger.kernel.org
-Cc: linux-kernel@vger.kernel.org
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-(cherry picked from commit eceb5daf9ebaa564a65eb2d9d5a4682a33747300)
----
- drivers/crypto/caam/ctrl.c   | 21 ++++++++++++++-------
- drivers/crypto/caam/intern.h |  1 -
- 2 files changed, 14 insertions(+), 8 deletions(-)
-
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -327,11 +327,6 @@ static int caam_remove(struct platform_d
- 	if (!ctrlpriv->mc_en && ctrlpriv->rng4_sh_init)
- 		deinstantiate_rng(ctrldev, ctrlpriv->rng4_sh_init);
- 
--	/* Shut down debug views */
--#ifdef CONFIG_DEBUG_FS
--	debugfs_remove_recursive(ctrlpriv->dfs_root);
--#endif
--
- 	return 0;
- }
- 
-@@ -563,6 +558,13 @@ static int init_clocks(struct device *de
- 	return devm_add_action_or_reset(dev, disable_clocks, ctrlpriv);
- }
- 
-+#ifdef CONFIG_DEBUG_FS
-+static void caam_remove_debugfs(void *root)
-+{
-+	debugfs_remove_recursive(root);
-+}
-+#endif
-+
- /* Probe routine for CAAM top (controller) level */
- static int caam_probe(struct platform_device *pdev)
- {
-@@ -575,6 +577,7 @@ static int caam_probe(struct platform_de
- 	struct caam_drv_private *ctrlpriv;
- #ifdef CONFIG_DEBUG_FS
- 	struct caam_perfmon *perfmon;
-+	struct dentry *dfs_root;
- #endif
- 	u32 scfgr, comp_params;
- 	u8 rng_vid;
-@@ -726,8 +729,12 @@ static int caam_probe(struct platform_de
- 	 */
- 	perfmon = (struct caam_perfmon __force *)&ctrl->perfmon;
- 
--	ctrlpriv->dfs_root = debugfs_create_dir(dev_name(dev), NULL);
--	ctrlpriv->ctl = debugfs_create_dir("ctl", ctrlpriv->dfs_root);
-+	dfs_root = debugfs_create_dir(dev_name(dev), NULL);
-+	ret = devm_add_action_or_reset(dev, caam_remove_debugfs, dfs_root);
-+	if (ret)
-+		return ret;
-+
-+	ctrlpriv->ctl = debugfs_create_dir("ctl", dfs_root);
- #endif
- 
- 	/* Check to see if (DPAA 1.x) QI present. If so, enable */
---- a/drivers/crypto/caam/intern.h
-+++ b/drivers/crypto/caam/intern.h
-@@ -102,7 +102,6 @@ struct caam_drv_private {
- 	 * variables at runtime.
- 	 */
- #ifdef CONFIG_DEBUG_FS
--	struct dentry *dfs_root;
- 	struct dentry *ctl; /* controller dir */
- 	struct debugfs_blob_wrapper ctl_kek_wrap, ctl_tkek_wrap, ctl_tdsk_wrap;
- #endif
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0006-crypto-caam-use-devres-to-de-initialize-the-RNG.patch b/target/linux/layerscape/patches-5.4/804-crypto-0006-crypto-caam-use-devres-to-de-initialize-the-RNG.patch
deleted file mode 100644
index 6e3cd24ac0..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0006-crypto-caam-use-devres-to-de-initialize-the-RNG.patch
+++ /dev/null
@@ -1,179 +0,0 @@
-From 4719469bf1e6d5bac8bb0426be4dd6a124471b69 Mon Sep 17 00:00:00 2001
-From: Andrey Smirnov <andrew.smirnov@gmail.com>
-Date: Tue, 22 Oct 2019 08:30:10 -0700
-Subject: [PATCH] crypto: caam - use devres to de-initialize the RNG
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use devres to de-initialize the RNG and drop explicit de-initialization
-code in caam_remove().
-
-Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
-Cc: Chris Healy <cphealy@gmail.com>
-Cc: Lucas Stach <l.stach@pengutronix.de>
-Cc: Horia Geantă <horia.geanta@nxp.com>
-Cc: Herbert Xu <herbert@gondor.apana.org.au>
-Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
-Cc: linux-crypto@vger.kernel.org
-Cc: linux-kernel@vger.kernel.org
-Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-(cherry picked from commit e57acaf0dfe0c8f63411d43cf7c689e43f6810c0)
----
- drivers/crypto/caam/ctrl.c | 130 ++++++++++++++++++++++++---------------------
- 1 file changed, 70 insertions(+), 60 deletions(-)
-
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -176,6 +176,73 @@ static inline int run_descriptor_deco0(s
- }
- 
- /*
-+ * deinstantiate_rng - builds and executes a descriptor on DECO0,
-+ *		       which deinitializes the RNG block.
-+ * @ctrldev - pointer to device
-+ * @state_handle_mask - bitmask containing the instantiation status
-+ *			for the RNG4 state handles which exist in
-+ *			the RNG4 block: 1 if it's been instantiated
-+ *
-+ * Return: - 0 if no error occurred
-+ *	   - -ENOMEM if there isn't enough memory to allocate the descriptor
-+ *	   - -ENODEV if DECO0 couldn't be acquired
-+ *	   - -EAGAIN if an error occurred when executing the descriptor
-+ */
-+static int deinstantiate_rng(struct device *ctrldev, int state_handle_mask)
-+{
-+	u32 *desc, status;
-+	int sh_idx, ret = 0;
-+
-+	desc = kmalloc(CAAM_CMD_SZ * 3, GFP_KERNEL);
-+	if (!desc)
-+		return -ENOMEM;
-+
-+	for (sh_idx = 0; sh_idx < RNG4_MAX_HANDLES; sh_idx++) {
-+		/*
-+		 * If the corresponding bit is set, then it means the state
-+		 * handle was initialized by us, and thus it needs to be
-+		 * deinitialized as well
-+		 */
-+		if ((1 << sh_idx) & state_handle_mask) {
-+			/*
-+			 * Create the descriptor for deinstantating this state
-+			 * handle
-+			 */
-+			build_deinstantiation_desc(desc, sh_idx);
-+
-+			/* Try to run it through DECO0 */
-+			ret = run_descriptor_deco0(ctrldev, desc, &status);
-+
-+			if (ret ||
-+			    (status && status != JRSTA_SSRC_JUMP_HALT_CC)) {
-+				dev_err(ctrldev,
-+					"Failed to deinstantiate RNG4 SH%d\n",
-+					sh_idx);
-+				break;
-+			}
-+			dev_info(ctrldev, "Deinstantiated RNG4 SH%d\n", sh_idx);
-+		}
-+	}
-+
-+	kfree(desc);
-+
-+	return ret;
-+}
-+
-+static void devm_deinstantiate_rng(void *data)
-+{
-+	struct device *ctrldev = data;
-+	struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev);
-+
-+	/*
-+	 * De-initialize RNG state handles initialized by this driver.
-+	 * In case of SoCs with Management Complex, RNG is managed by MC f/w.
-+	 */
-+	if (ctrlpriv->rng4_sh_init)
-+		deinstantiate_rng(ctrldev, ctrlpriv->rng4_sh_init);
-+}
-+
-+/*
-  * instantiate_rng - builds and executes a descriptor on DECO0,
-  *		     which initializes the RNG block.
-  * @ctrldev - pointer to device
-@@ -247,59 +314,9 @@ static int instantiate_rng(struct device
- 
- 	kfree(desc);
- 
--	return ret;
--}
--
--/*
-- * deinstantiate_rng - builds and executes a descriptor on DECO0,
-- *		       which deinitializes the RNG block.
-- * @ctrldev - pointer to device
-- * @state_handle_mask - bitmask containing the instantiation status
-- *			for the RNG4 state handles which exist in
-- *			the RNG4 block: 1 if it's been instantiated
-- *
-- * Return: - 0 if no error occurred
-- *	   - -ENOMEM if there isn't enough memory to allocate the descriptor
-- *	   - -ENODEV if DECO0 couldn't be acquired
-- *	   - -EAGAIN if an error occurred when executing the descriptor
-- */
--static int deinstantiate_rng(struct device *ctrldev, int state_handle_mask)
--{
--	u32 *desc, status;
--	int sh_idx, ret = 0;
--
--	desc = kmalloc(CAAM_CMD_SZ * 3, GFP_KERNEL);
--	if (!desc)
--		return -ENOMEM;
--
--	for (sh_idx = 0; sh_idx < RNG4_MAX_HANDLES; sh_idx++) {
--		/*
--		 * If the corresponding bit is set, then it means the state
--		 * handle was initialized by us, and thus it needs to be
--		 * deinitialized as well
--		 */
--		if ((1 << sh_idx) & state_handle_mask) {
--			/*
--			 * Create the descriptor for deinstantating this state
--			 * handle
--			 */
--			build_deinstantiation_desc(desc, sh_idx);
--
--			/* Try to run it through DECO0 */
--			ret = run_descriptor_deco0(ctrldev, desc, &status);
--
--			if (ret ||
--			    (status && status != JRSTA_SSRC_JUMP_HALT_CC)) {
--				dev_err(ctrldev,
--					"Failed to deinstantiate RNG4 SH%d\n",
--					sh_idx);
--				break;
--			}
--			dev_info(ctrldev, "Deinstantiated RNG4 SH%d\n", sh_idx);
--		}
--	}
--
--	kfree(desc);
-+	if (!ret)
-+		ret = devm_add_action_or_reset(ctrldev, devm_deinstantiate_rng,
-+					       ctrldev);
- 
- 	return ret;
- }
-@@ -320,13 +337,6 @@ static int caam_remove(struct platform_d
- 		caam_qi_shutdown(ctrldev);
- #endif
- 
--	/*
--	 * De-initialize RNG state handles initialized by this driver.
--	 * In case of SoCs with Management Complex, RNG is managed by MC f/w.
--	 */
--	if (!ctrlpriv->mc_en && ctrlpriv->rng4_sh_init)
--		deinstantiate_rng(ctrldev, ctrlpriv->rng4_sh_init);
--
- 	return 0;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0007-crypto-caam-use-devres-to-de-initialize-QI.patch b/target/linux/layerscape/patches-5.4/804-crypto-0007-crypto-caam-use-devres-to-de-initialize-QI.patch
deleted file mode 100644
index f9e7940fa8..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0007-crypto-caam-use-devres-to-de-initialize-QI.patch
+++ /dev/null
@@ -1,114 +0,0 @@
-From 5a359d189f9938d30046aedfc94c9cd7fe383e34 Mon Sep 17 00:00:00 2001
-From: Andrey Smirnov <andrew.smirnov@gmail.com>
-Date: Tue, 22 Oct 2019 08:30:11 -0700
-Subject: [PATCH] crypto: caam - use devres to de-initialize QI
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use devres to de-initialize the QI and drop explicit de-initialization
-code in caam_remove().
-
-Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
-Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
-Cc: Chris Healy <cphealy@gmail.com>
-Cc: Lucas Stach <l.stach@pengutronix.de>
-Cc: Horia Geantă <horia.geanta@nxp.com>
-Cc: Herbert Xu <herbert@gondor.apana.org.au>
-Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
-Cc: linux-crypto@vger.kernel.org
-Cc: linux-kernel@vger.kernel.org
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-(cherry picked from commit f414de2e2fffd89c8a4e5b5e06b0eba5f9d8b1eb)
----
- drivers/crypto/caam/ctrl.c   | 14 +-------------
- drivers/crypto/caam/intern.h |  3 ---
- drivers/crypto/caam/qi.c     |  8 ++++++--
- drivers/crypto/caam/qi.h     |  1 -
- 4 files changed, 7 insertions(+), 19 deletions(-)
-
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -332,11 +332,6 @@ static int caam_remove(struct platform_d
- 	/* Remove platform devices under the crypto node */
- 	of_platform_depopulate(ctrldev);
- 
--#ifdef CONFIG_CAAM_QI
--	if (ctrlpriv->qi_init)
--		caam_qi_shutdown(ctrldev);
--#endif
--
- 	return 0;
- }
- 
-@@ -767,7 +762,7 @@ static int caam_probe(struct platform_de
- 	ret = of_platform_populate(nprop, caam_match, NULL, dev);
- 	if (ret) {
- 		dev_err(dev, "JR platform devices creation error\n");
--		goto shutdown_qi;
-+		return ret;
- 	}
- 
- 	ring = 0;
-@@ -928,13 +923,6 @@ static int caam_probe(struct platform_de
- caam_remove:
- 	caam_remove(pdev);
- 	return ret;
--
--shutdown_qi:
--#ifdef CONFIG_CAAM_QI
--	if (ctrlpriv->qi_init)
--		caam_qi_shutdown(dev);
--#endif
--	return ret;
- }
- 
- static struct platform_driver caam_driver = {
---- a/drivers/crypto/caam/intern.h
-+++ b/drivers/crypto/caam/intern.h
-@@ -81,9 +81,6 @@ struct caam_drv_private {
- 	 */
- 	u8 total_jobrs;		/* Total Job Rings in device */
- 	u8 qi_present;		/* Nonzero if QI present in device */
--#ifdef CONFIG_CAAM_QI
--	u8 qi_init;		/* Nonzero if QI has been initialized */
--#endif
- 	u8 mc_en;		/* Nonzero if MC f/w is active */
- 	int secvio_irq;		/* Security violation interrupt number */
- 	int virt_en;		/* Virtualization enabled in CAAM */
---- a/drivers/crypto/caam/qi.c
-+++ b/drivers/crypto/caam/qi.c
-@@ -500,9 +500,10 @@ void caam_drv_ctx_rel(struct caam_drv_ct
- }
- EXPORT_SYMBOL(caam_drv_ctx_rel);
- 
--void caam_qi_shutdown(struct device *qidev)
-+static void caam_qi_shutdown(void *data)
- {
- 	int i;
-+	struct device *qidev = data;
- 	struct caam_qi_priv *priv = &qipriv;
- 	const cpumask_t *cpus = qman_affine_cpus();
- 
-@@ -761,7 +762,10 @@ int caam_qi_init(struct platform_device
- 			    &times_congested, &caam_fops_u64_ro);
- #endif
- 
--	ctrlpriv->qi_init = 1;
-+	err = devm_add_action_or_reset(qidev, caam_qi_shutdown, ctrlpriv);
-+	if (err)
-+		return err;
-+
- 	dev_info(qidev, "Linux CAAM Queue I/F driver initialised\n");
- 	return 0;
- }
---- a/drivers/crypto/caam/qi.h
-+++ b/drivers/crypto/caam/qi.h
-@@ -147,7 +147,6 @@ int caam_drv_ctx_update(struct caam_drv_
- void caam_drv_ctx_rel(struct caam_drv_ctx *drv_ctx);
- 
- int caam_qi_init(struct platform_device *pdev);
--void caam_qi_shutdown(struct device *dev);
- 
- /**
-  * qi_cache_alloc - Allocate buffers from CAAM-QI cache
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0008-crypto-caam-use-devres-to-populate-platform-devices.patch b/target/linux/layerscape/patches-5.4/804-crypto-0008-crypto-caam-use-devres-to-populate-platform-devices.patch
deleted file mode 100644
index c3a8ba2fd8..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0008-crypto-caam-use-devres-to-populate-platform-devices.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 7200bc3a88315a59e7094bf111c7816f0298923f Mon Sep 17 00:00:00 2001
-From: Andrey Smirnov <andrew.smirnov@gmail.com>
-Date: Tue, 22 Oct 2019 08:30:12 -0700
-Subject: [PATCH] crypto: caam - use devres to populate platform devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use devres to de-initialize the RNG and drop explicit de-initialization
-code in caam_remove().
-
-Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
-Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
-Cc: Chris Healy <cphealy@gmail.com>
-Cc: Lucas Stach <l.stach@pengutronix.de>
-Cc: Horia Geantă <horia.geanta@nxp.com>
-Cc: Herbert Xu <herbert@gondor.apana.org.au>
-Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
-Cc: linux-crypto@vger.kernel.org
-Cc: linux-kernel@vger.kernel.org
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-(cherry picked from commit 1a1c4f004444ebb962a02b7fc6d534e0f2ed9acb)
----
- drivers/crypto/caam/ctrl.c | 26 +++-----------------------
- 1 file changed, 3 insertions(+), 23 deletions(-)
-
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -321,20 +321,6 @@ static int instantiate_rng(struct device
- 	return ret;
- }
- 
--static int caam_remove(struct platform_device *pdev)
--{
--	struct device *ctrldev;
--	struct caam_drv_private *ctrlpriv;
--
--	ctrldev = &pdev->dev;
--	ctrlpriv = dev_get_drvdata(ctrldev);
--
--	/* Remove platform devices under the crypto node */
--	of_platform_depopulate(ctrldev);
--
--	return 0;
--}
--
- /*
-  * kick_trng - sets the various parameters for enabling the initialization
-  *	       of the RNG4 block in CAAM
-@@ -759,7 +745,7 @@ static int caam_probe(struct platform_de
- #endif
- 	}
- 
--	ret = of_platform_populate(nprop, caam_match, NULL, dev);
-+	ret = devm_of_platform_populate(dev);
- 	if (ret) {
- 		dev_err(dev, "JR platform devices creation error\n");
- 		return ret;
-@@ -781,8 +767,7 @@ static int caam_probe(struct platform_de
- 	/* If no QI and no rings specified, quit and go home */
- 	if ((!ctrlpriv->qi_present) && (!ctrlpriv->total_jobrs)) {
- 		dev_err(dev, "no queues configured, terminating\n");
--		ret = -ENOMEM;
--		goto caam_remove;
-+		return -ENOMEM;
- 	}
- 
- 	if (ctrlpriv->era < 10)
-@@ -845,7 +830,7 @@ static int caam_probe(struct platform_de
- 		} while ((ret == -EAGAIN) && (ent_delay < RTSDCTL_ENT_DLY_MAX));
- 		if (ret) {
- 			dev_err(dev, "failed to instantiate RNG");
--			goto caam_remove;
-+			return ret;
- 		}
- 		/*
- 		 * Set handles init'ed by this module as the complement of the
-@@ -919,10 +904,6 @@ static int caam_probe(struct platform_de
- 			    &ctrlpriv->ctl_tdsk_wrap);
- #endif
- 	return 0;
--
--caam_remove:
--	caam_remove(pdev);
--	return ret;
- }
- 
- static struct platform_driver caam_driver = {
-@@ -931,7 +912,6 @@ static struct platform_driver caam_drive
- 		.of_match_table = caam_match,
- 	},
- 	.probe       = caam_probe,
--	.remove      = caam_remove,
- };
- 
- module_platform_driver(caam_driver);
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0009-crypto-caam-populate-platform-devices-last.patch b/target/linux/layerscape/patches-5.4/804-crypto-0009-crypto-caam-populate-platform-devices-last.patch
deleted file mode 100644
index 8ab1199e9d..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0009-crypto-caam-populate-platform-devices-last.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 6d186bceac74dd7fcabac860295cfb7b893168cd Mon Sep 17 00:00:00 2001
-From: Andrey Smirnov <andrew.smirnov@gmail.com>
-Date: Tue, 22 Oct 2019 08:30:13 -0700
-Subject: [PATCH] crypto: caam - populate platform devices last
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move the call to devm_of_platform_populate() at the end of
-caam_probe(), so we won't try to add any child devices until all of
-the initialization is finished successfully.
-
-Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
-Cc: Chris Healy <cphealy@gmail.com>
-Cc: Lucas Stach <l.stach@pengutronix.de>
-Cc: Horia Geantă <horia.geanta@nxp.com>
-Cc: Herbert Xu <herbert@gondor.apana.org.au>
-Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
-Cc: linux-crypto@vger.kernel.org
-Cc: linux-kernel@vger.kernel.org
-Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-(cherry picked from commit 51d13aaf59779ff4d13f1def2c72ae102a1aad40)
----
- drivers/crypto/caam/ctrl.c | 13 ++++++-------
- 1 file changed, 6 insertions(+), 7 deletions(-)
-
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -745,12 +745,6 @@ static int caam_probe(struct platform_de
- #endif
- 	}
- 
--	ret = devm_of_platform_populate(dev);
--	if (ret) {
--		dev_err(dev, "JR platform devices creation error\n");
--		return ret;
--	}
--
- 	ring = 0;
- 	for_each_available_child_of_node(nprop, np)
- 		if (of_device_is_compatible(np, "fsl,sec-v4.0-job-ring") ||
-@@ -903,7 +897,12 @@ static int caam_probe(struct platform_de
- 	debugfs_create_blob("tdsk", S_IRUSR | S_IRGRP | S_IROTH, ctrlpriv->ctl,
- 			    &ctrlpriv->ctl_tdsk_wrap);
- #endif
--	return 0;
-+
-+	ret = devm_of_platform_populate(dev);
-+	if (ret)
-+		dev_err(dev, "JR platform devices creation error\n");
-+
-+	return ret;
- }
- 
- static struct platform_driver caam_driver = {
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0010-MLK-9769-1-crypto-caam-jr-remove-incorrect-comment-f.patch b/target/linux/layerscape/patches-5.4/804-crypto-0010-MLK-9769-1-crypto-caam-jr-remove-incorrect-comment-f.patch
deleted file mode 100644
index a9221cc0fc..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0010-MLK-9769-1-crypto-caam-jr-remove-incorrect-comment-f.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 7bf33e375e1b260d2ef3c414852a2131ce11d113 Mon Sep 17 00:00:00 2001
-From: Victoria Milhoan <vicki.milhoan@freescale.com>
-Date: Wed, 29 Oct 2014 11:23:05 -0700
-Subject: [PATCH] MLK-9769-1 crypto: caam/jr - remove incorrect comment from
- job ring module
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-caam_jr_register() function is no longer part of the driver since
-commit 6dad41158db6 ("crypto: caam - Remove unused functions from Job Ring")
-
-This patch removes a comment referencing the function.
-
-Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
-Signed-off-by: Dan Douglass <dan.douglass@freescale.com>
-Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
-(cherry picked from commit 96c125b8962ba5bcbb625b0b162644c16fb33685)
-
--changed commit headline prefix
--added details about commit removing caam_jr_register()
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/jr.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/crypto/caam/jr.c
-+++ b/drivers/crypto/caam/jr.c
-@@ -327,8 +327,7 @@ EXPORT_SYMBOL(caam_jr_free);
-  * caam_jr_enqueue() - Enqueue a job descriptor head. Returns 0 if OK,
-  * -EBUSY if the queue is full, -EIO if it cannot map the caller's
-  * descriptor.
-- * @dev:  device of the job ring to be used. This device should have
-- *        been assigned prior by caam_jr_register().
-+ * @dev:  struct device of the job ring to be used
-  * @desc: points to a job descriptor that execute our request. All
-  *        descriptors (and all referenced data) must be in a DMAable
-  *        region, and all data references must be physical addresses
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0011-MLK-20204-crypto-caam-remove-deadcode-on-32-bit-plat.patch b/target/linux/layerscape/patches-5.4/804-crypto-0011-MLK-20204-crypto-caam-remove-deadcode-on-32-bit-plat.patch
deleted file mode 100644
index 1adf63456d..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0011-MLK-20204-crypto-caam-remove-deadcode-on-32-bit-plat.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 4269eb560ac34c5974559fe256811c1ac5d764ed Mon Sep 17 00:00:00 2001
-From: Franck LENORMAND <franck.lenormand@nxp.com>
-Date: Fri, 23 Nov 2018 16:06:45 +0100
-Subject: [PATCH] MLK-20204 crypto: caam - remove deadcode on 32-bit platforms
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When building on a platform with a 32bit DMA address, taking the
-upper 32 bits makes no sense.
-
-Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
-(cherry picked from commit d3346aaa3fbfaf9b7f827d8554f076e3fc82c35b)
-
--replace ifdeffery with IS_ENABLED() macro
--change commit headline prefix
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/regs.h | 11 ++++++++---
- 1 file changed, 8 insertions(+), 3 deletions(-)
-
---- a/drivers/crypto/caam/regs.h
-+++ b/drivers/crypto/caam/regs.h
-@@ -173,9 +173,14 @@ static inline u64 rd_reg64(void __iomem
- 
- static inline u64 cpu_to_caam_dma64(dma_addr_t value)
- {
--	if (caam_imx)
--		return (((u64)cpu_to_caam32(lower_32_bits(value)) << 32) |
--			 (u64)cpu_to_caam32(upper_32_bits(value)));
-+	if (caam_imx) {
-+		u64 ret_val = (u64)cpu_to_caam32(lower_32_bits(value)) << 32;
-+
-+		if (IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT))
-+			ret_val |= (u64)cpu_to_caam32(upper_32_bits(value));
-+
-+		return ret_val;
-+	}
- 
- 	return cpu_to_caam64(value);
- }
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0012-MLK-19053-crypto-caam-RNG4-TRNG-errata.patch b/target/linux/layerscape/patches-5.4/804-crypto-0012-MLK-19053-crypto-caam-RNG4-TRNG-errata.patch
deleted file mode 100644
index 761652ab71..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0012-MLK-19053-crypto-caam-RNG4-TRNG-errata.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From e1a89cdf6fa6b04806eb24b939738bb89ab62914 Mon Sep 17 00:00:00 2001
-From: Aymen Sghaier <aymen.sghaier@nxp.com>
-Date: Thu, 13 Sep 2018 16:41:03 +0200
-Subject: [PATCH] MLK-19053 crypto: caam - RNG4 TRNG errata
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
- The TRNG as used in RNG4, used in CAAM has a documentation issue. The
-effect is that it is possible that the entropy used to instantiate the
-DRBG may be old entropy, rather than newly generated entropy. There is
-proper programming guidance, but it is not in the documentation.
-
-Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com>
-Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
-(cherry picked from commit ea2b30c8171acf7624e3d44276737c3878ca900d)
-
--ported to RNG initialization in ctrl.c
--changed commit headline
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/ctrl.c | 9 +++++++--
- drivers/crypto/caam/regs.h | 3 ++-
- 2 files changed, 9 insertions(+), 3 deletions(-)
-
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -339,7 +339,11 @@ static void kick_trng(struct platform_de
- 	r4tst = &ctrl->r4tst[0];
- 
- 	/* put RNG4 into program mode */
--	clrsetbits_32(&r4tst->rtmctl, 0, RTMCTL_PRGM);
-+	/* Setting both RTMCTL:PRGM and RTMCTL:TRNG_ACC causes TRNG to
-+	 * properly invalidate the entropy in the entropy register and
-+	 * force re-generation.
-+	 */
-+	clrsetbits_32(&r4tst->rtmctl, 0, RTMCTL_PRGM | RTMCTL_ACC);
- 
- 	/*
- 	 * Performance-wise, it does not make sense to
-@@ -369,7 +373,8 @@ start_rng:
- 	 * select raw sampling in both entropy shifter
- 	 * and statistical checker; ; put RNG4 into run mode
- 	 */
--	clrsetbits_32(&r4tst->rtmctl, RTMCTL_PRGM, RTMCTL_SAMP_MODE_RAW_ES_SC);
-+	clrsetbits_32(&r4tst->rtmctl, RTMCTL_PRGM | RTMCTL_ACC,
-+		      RTMCTL_SAMP_MODE_RAW_ES_SC);
- }
- 
- static int caam_get_era_from_hw(struct caam_ctrl __iomem *ctrl)
---- a/drivers/crypto/caam/regs.h
-+++ b/drivers/crypto/caam/regs.h
-@@ -495,7 +495,8 @@ struct rngtst {
- 
- /* RNG4 TRNG test registers */
- struct rng4tst {
--#define RTMCTL_PRGM	0x00010000	/* 1 -> program mode, 0 -> run mode */
-+#define RTMCTL_ACC  BIT(5)  /* TRNG access mode */
-+#define RTMCTL_PRGM BIT(16) /* 1 -> program mode, 0 -> run mode */
- #define RTMCTL_SAMP_MODE_VON_NEUMANN_ES_SC	0 /* use von Neumann data in
- 						     both entropy shifter and
- 						     statistical checker */
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0013-MLK-9769-9-crypto-caam-adjust-RNG-timing-to-support-.patch b/target/linux/layerscape/patches-5.4/804-crypto-0013-MLK-9769-9-crypto-caam-adjust-RNG-timing-to-support-.patch
deleted file mode 100644
index 5c30e1d287..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0013-MLK-9769-9-crypto-caam-adjust-RNG-timing-to-support-.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 5bc830089553a445952d69a73e0a9f5fdf9d0f19 Mon Sep 17 00:00:00 2001
-From: Victoria Milhoan <vicki.milhoan@freescale.com>
-Date: Wed, 12 Nov 2014 09:58:24 -0700
-Subject: [PATCH] MLK-9769-9 crypto: caam - adjust RNG timing to support more
- devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Adjust RNG timing parameters to support more i.MX6 devices.
-
-Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
-Signed-off-by: Dan Douglass <dan.douglass@freescale.com>
-Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
-(cherry picked from commit 57eabb638430ec68490d192738640b95a3507b1d)
-
-Changed commit headline prefix.
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/ctrl.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -364,8 +364,8 @@ static void kick_trng(struct platform_de
- 	wr_reg32(&r4tst->rtsdctl, val);
- 	/* min. freq. count, equal to 1/4 of the entropy sample length */
- 	wr_reg32(&r4tst->rtfrqmin, ent_delay >> 2);
--	/* disable maximum frequency count */
--	wr_reg32(&r4tst->rtfrqmax, RTFRQMAX_DISABLE);
-+	/* max. freq. count, equal to 16 times the entropy sample length */
-+	wr_reg32(&r4tst->rtfrqmax, ent_delay << 4);
- 	/* read the control register */
- 	val = rd_reg32(&r4tst->rtmctl);
- start_rng:
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0014-MLK-9769-8-crypto-caam-add-a-test-for-the-RNG.patch b/target/linux/layerscape/patches-5.4/804-crypto-0014-MLK-9769-8-crypto-caam-add-a-test-for-the-RNG.patch
deleted file mode 100644
index 3a9174557e..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0014-MLK-9769-8-crypto-caam-add-a-test-for-the-RNG.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From 387a26c56933fbfd0fa211ad5347d48d08695ea0 Mon Sep 17 00:00:00 2001
-From: "Victoria Milhoan (b42089)" <vicki.milhoan@freescale.com>
-Date: Fri, 17 Oct 2014 16:30:56 -0700
-Subject: [PATCH] MLK-9769-8 crypto: caam - add a test for the RNG
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Freescale's CAAM includes a Random Number Generator.  This change adds
-a kernel configuration option to test the RNG's capabilities via the
-hw_random framework.
-
-Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
-Signed-off-by: Dan Douglass <dan.douglass@freescale.com>
-Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
-(cherry picked from commit 05fba1bb857d5329fdcf79e736643fce0944a86d)
-
--fixed compilation warning:
-drivers/crypto/caam/caamrng.c:271:2: warning: format '%d' expects argument of type 'int', but argument 2 has type 'size_t' [-Wformat=]
-
--changed commit headline
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/Kconfig   |  8 ++++++++
- drivers/crypto/caam/caamrng.c | 47 +++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 55 insertions(+)
-
---- a/drivers/crypto/caam/Kconfig
-+++ b/drivers/crypto/caam/Kconfig
-@@ -148,6 +148,14 @@ config CRYPTO_DEV_FSL_CAAM_RNG_API
- 	  Selecting this will register the SEC4 hardware rng to
- 	  the hw_random API for suppying the kernel entropy pool.
- 
-+config CRYPTO_DEV_FSL_CAAM_RNG_TEST
-+	bool "Test caam rng"
-+	depends on CRYPTO_DEV_FSL_CAAM_RNG_API
-+	help
-+	  Selecting this will enable a self-test to run for the
-+	  caam RNG. This test is several minutes long and executes
-+	  just before the RNG is registered with the hw_random API.
-+
- endif # CRYPTO_DEV_FSL_CAAM_JR
- 
- endif # CRYPTO_DEV_FSL_CAAM
---- a/drivers/crypto/caam/caamrng.c
-+++ b/drivers/crypto/caam/caamrng.c
-@@ -258,6 +258,49 @@ static void caam_cleanup(struct hwrng *r
- 	rng_unmap_ctx(rng_ctx);
- }
- 
-+#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_TEST
-+static inline void test_len(struct hwrng *rng, size_t len, bool wait)
-+{
-+	u8 *buf;
-+	int real_len;
-+
-+	buf = kzalloc(sizeof(u8) * len, GFP_KERNEL);
-+	real_len = rng->read(rng, buf, len, wait);
-+	if (real_len == 0 && wait)
-+		pr_err("WAITING FAILED\n");
-+	pr_info("wanted %zu bytes, got %d\n", len, real_len);
-+	print_hex_dump(KERN_INFO, "random bytes@: ", DUMP_PREFIX_ADDRESS,
-+		       16, 4, buf, real_len, 1);
-+	kfree(buf);
-+}
-+
-+static inline void test_mode_once(struct hwrng *rng, bool wait)
-+{
-+#define TEST_CHUNK (RN_BUF_SIZE / 4)
-+
-+	test_len(rng, TEST_CHUNK, wait);
-+	test_len(rng, RN_BUF_SIZE * 2, wait);
-+	test_len(rng, RN_BUF_SIZE * 2 - TEST_CHUNK, wait);
-+}
-+
-+static inline void test_mode(struct hwrng *rng, bool wait)
-+{
-+#define TEST_PASS 1
-+	int i;
-+
-+	for (i = 0; i < TEST_PASS; i++)
-+		test_mode_once(rng, wait);
-+}
-+
-+static void self_test(struct hwrng *rng)
-+{
-+	pr_info("testing without waiting\n");
-+	test_mode(rng, false);
-+	pr_info("testing with waiting\n");
-+	test_mode(rng, true);
-+}
-+#endif
-+
- static int caam_init_buf(struct caam_rng_ctx *ctx, int buf_id)
- {
- 	struct buf_data *bd = &ctx->bufs[buf_id];
-@@ -342,6 +385,10 @@ int caam_rng_init(struct device *ctrldev
- 	if (err)
- 		goto free_rng_ctx;
- 
-+#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_TEST
-+	self_test(&caam_rng);
-+#endif
-+
- 	dev_info(dev, "registering rng-caam\n");
- 
- 	err = hwrng_register(&caam_rng);
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0015-MLKU-123-1-crypto-caam-add-support-for-i.mx8mm-mn.patch b/target/linux/layerscape/patches-5.4/804-crypto-0015-MLKU-123-1-crypto-caam-add-support-for-i.mx8mm-mn.patch
deleted file mode 100644
index def910aaab..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0015-MLKU-123-1-crypto-caam-add-support-for-i.mx8mm-mn.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 866aab825ad10675b1e98004aec19127ec16b2b3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Horia=20Geant=C4=83?= <horia.geanta@nxp.com>
-Date: Mon, 23 Sep 2019 14:28:42 +0300
-Subject: [PATCH] MLKU-123-1 crypto: caam - add support for i.mx8mm, mn
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-TODO:
-
-1. clarify logic wrt. virtualization and DECORSR - see e-mail thread:
-"Register-based interface - DECORSR with virtualization disabled"
-
-2. check whether the clocks are identical for all mScale parts,
-and if they do use a single "i.MX8M*" entry in clocks array.
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/ctrl.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -99,10 +99,12 @@ static inline int run_descriptor_deco0(s
- 
- 	if (ctrlpriv->virt_en == 1 ||
- 	    /*
--	     * Apparently on i.MX8MQ it doesn't matter if virt_en == 1
-+	     * Apparently on i.MX8MQ, 8MM, 8MN it doesn't matter if virt_en == 1
- 	     * and the following steps should be performed regardless
- 	     */
--	    of_machine_is_compatible("fsl,imx8mq")) {
-+	    of_machine_is_compatible("fsl,imx8mq") ||
-+	    of_machine_is_compatible("fsl,imx8mm") ||
-+	    of_machine_is_compatible("fsl,imx8mn")) {
- 		clrsetbits_32(&ctrl->deco_rsr, 0, DECORSR_JR0);
- 
- 		while (!(rd_reg32(&ctrl->deco_rsr) & DECORSR_VALID) &&
-@@ -514,6 +516,8 @@ static const struct soc_device_attribute
- 	{ .soc_id = "i.MX6*",  .data = &caam_imx6_data },
- 	{ .soc_id = "i.MX7*",  .data = &caam_imx7_data },
- 	{ .soc_id = "i.MX8MQ", .data = &caam_imx7_data },
-+	{ .soc_id = "i.MX8MM", .data = &caam_imx7_data },
-+	{ .soc_id = "i.MX8MN", .data = &caam_imx7_data },
- 	{ .family = "Freescale i.MX" },
- 	{ /* sentinel */ }
- };
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch b/target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch
deleted file mode 100644
index 106255449c..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch
+++ /dev/null
@@ -1,294 +0,0 @@
-From 3d21ebe0b870b9b65b3be0c1473e7148256c4d16 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Horia=20Geant=C4=83?= <horia.geanta@nxp.com>
-Date: Tue, 24 Sep 2019 14:56:48 +0300
-Subject: [PATCH] MLKU-114-1 crypto: caam - reduce page 0 regs access to
- minimum
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-TODO:
-
-1. if of_property_read_u32_index(,,index=0,) is to be used,
-DT bindings (fsl-sec4.txt) should be updated to mandate for
--checked that all existing DTs are configured like this
--this might create problems in the future, if DTs are needed where
-JR DT nodes would exist without the controller DT node
-(directly on simple bus etc.)
-
-2. MCFGR (ctrl->mcr)
-How to determine caam_ptr_sz if MCFGR is not accesible?
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/caamalg.c  | 21 ++++++------
- drivers/crypto/caam/caamhash.c |  8 +++--
- drivers/crypto/caam/caampkc.c  |  4 +--
- drivers/crypto/caam/caamrng.c  |  4 +--
- drivers/crypto/caam/ctrl.c     | 78 ++++++++++++++++++++++++++----------------
- 5 files changed, 68 insertions(+), 47 deletions(-)
-
---- a/drivers/crypto/caam/caamalg.c
-+++ b/drivers/crypto/caam/caamalg.c
-@@ -3520,13 +3520,14 @@ int caam_algapi_init(struct device *ctrl
- 	 * First, detect presence and attributes of DES, AES, and MD blocks.
- 	 */
- 	if (priv->era < 10) {
-+		struct caam_perfmon __iomem *perfmon = &priv->jr[0]->perfmon;
- 		u32 cha_vid, cha_inst, aes_rn;
- 
--		cha_vid = rd_reg32(&priv->ctrl->perfmon.cha_id_ls);
-+		cha_vid = rd_reg32(&perfmon->cha_id_ls);
- 		aes_vid = cha_vid & CHA_ID_LS_AES_MASK;
- 		md_vid = (cha_vid & CHA_ID_LS_MD_MASK) >> CHA_ID_LS_MD_SHIFT;
- 
--		cha_inst = rd_reg32(&priv->ctrl->perfmon.cha_num_ls);
-+		cha_inst = rd_reg32(&perfmon->cha_num_ls);
- 		des_inst = (cha_inst & CHA_ID_LS_DES_MASK) >>
- 			   CHA_ID_LS_DES_SHIFT;
- 		aes_inst = cha_inst & CHA_ID_LS_AES_MASK;
-@@ -3534,23 +3535,23 @@ int caam_algapi_init(struct device *ctrl
- 		ccha_inst = 0;
- 		ptha_inst = 0;
- 
--		aes_rn = rd_reg32(&priv->ctrl->perfmon.cha_rev_ls) &
--			 CHA_ID_LS_AES_MASK;
-+		aes_rn = rd_reg32(&perfmon->cha_rev_ls) & CHA_ID_LS_AES_MASK;
- 		gcm_support = !(aes_vid == CHA_VER_VID_AES_LP && aes_rn < 8);
- 	} else {
-+		struct version_regs __iomem *vreg = &priv->jr[0]->vreg;
- 		u32 aesa, mdha;
- 
--		aesa = rd_reg32(&priv->ctrl->vreg.aesa);
--		mdha = rd_reg32(&priv->ctrl->vreg.mdha);
-+		aesa = rd_reg32(&vreg->aesa);
-+		mdha = rd_reg32(&vreg->mdha);
- 
- 		aes_vid = (aesa & CHA_VER_VID_MASK) >> CHA_VER_VID_SHIFT;
- 		md_vid = (mdha & CHA_VER_VID_MASK) >> CHA_VER_VID_SHIFT;
- 
--		des_inst = rd_reg32(&priv->ctrl->vreg.desa) & CHA_VER_NUM_MASK;
-+		des_inst = rd_reg32(&vreg->desa) & CHA_VER_NUM_MASK;
- 		aes_inst = aesa & CHA_VER_NUM_MASK;
- 		md_inst = mdha & CHA_VER_NUM_MASK;
--		ccha_inst = rd_reg32(&priv->ctrl->vreg.ccha) & CHA_VER_NUM_MASK;
--		ptha_inst = rd_reg32(&priv->ctrl->vreg.ptha) & CHA_VER_NUM_MASK;
-+		ccha_inst = rd_reg32(&vreg->ccha) & CHA_VER_NUM_MASK;
-+		ptha_inst = rd_reg32(&vreg->ptha) & CHA_VER_NUM_MASK;
- 
- 		gcm_support = aesa & CHA_VER_MISC_AES_GCM;
- 	}
---- a/drivers/crypto/caam/caamhash.c
-+++ b/drivers/crypto/caam/caamhash.c
-@@ -1991,12 +1991,14 @@ int caam_algapi_hash_init(struct device
- 	 * presence and attributes of MD block.
- 	 */
- 	if (priv->era < 10) {
--		md_vid = (rd_reg32(&priv->ctrl->perfmon.cha_id_ls) &
-+		struct caam_perfmon __iomem *perfmon = &priv->jr[0]->perfmon;
-+
-+		md_vid = (rd_reg32(&perfmon->cha_id_ls) &
- 			  CHA_ID_LS_MD_MASK) >> CHA_ID_LS_MD_SHIFT;
--		md_inst = (rd_reg32(&priv->ctrl->perfmon.cha_num_ls) &
-+		md_inst = (rd_reg32(&perfmon->cha_num_ls) &
- 			   CHA_ID_LS_MD_MASK) >> CHA_ID_LS_MD_SHIFT;
- 	} else {
--		u32 mdha = rd_reg32(&priv->ctrl->vreg.mdha);
-+		u32 mdha = rd_reg32(&priv->jr[0]->vreg.mdha);
- 
- 		md_vid = (mdha & CHA_VER_VID_MASK) >> CHA_VER_VID_SHIFT;
- 		md_inst = mdha & CHA_VER_NUM_MASK;
---- a/drivers/crypto/caam/caampkc.c
-+++ b/drivers/crypto/caam/caampkc.c
-@@ -1099,10 +1099,10 @@ int caam_pkc_init(struct device *ctrldev
- 
- 	/* Determine public key hardware accelerator presence. */
- 	if (priv->era < 10) {
--		pk_inst = (rd_reg32(&priv->ctrl->perfmon.cha_num_ls) &
-+		pk_inst = (rd_reg32(&priv->jr[0]->perfmon.cha_num_ls) &
- 			   CHA_ID_LS_PK_MASK) >> CHA_ID_LS_PK_SHIFT;
- 	} else {
--		pkha = rd_reg32(&priv->ctrl->vreg.pkha);
-+		pkha = rd_reg32(&priv->jr[0]->vreg.pkha);
- 		pk_inst = pkha & CHA_VER_NUM_MASK;
- 
- 		/*
---- a/drivers/crypto/caam/caamrng.c
-+++ b/drivers/crypto/caam/caamrng.c
-@@ -363,10 +363,10 @@ int caam_rng_init(struct device *ctrldev
- 
- 	/* Check for an instantiated RNG before registration */
- 	if (priv->era < 10)
--		rng_inst = (rd_reg32(&priv->ctrl->perfmon.cha_num_ls) &
-+		rng_inst = (rd_reg32(&priv->jr[0]->perfmon.cha_num_ls) &
- 			    CHA_ID_LS_RNG_MASK) >> CHA_ID_LS_RNG_SHIFT;
- 	else
--		rng_inst = rd_reg32(&priv->ctrl->vreg.rng) & CHA_VER_NUM_MASK;
-+		rng_inst = rd_reg32(&priv->jr[0]->vreg.rng) & CHA_VER_NUM_MASK;
- 
- 	if (!rng_inst)
- 		return 0;
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -379,7 +379,7 @@ start_rng:
- 		      RTMCTL_SAMP_MODE_RAW_ES_SC);
- }
- 
--static int caam_get_era_from_hw(struct caam_ctrl __iomem *ctrl)
-+static int caam_get_era_from_hw(struct caam_perfmon __iomem *perfmon)
- {
- 	static const struct {
- 		u16 ip_id;
-@@ -405,12 +405,12 @@ static int caam_get_era_from_hw(struct c
- 	u16 ip_id;
- 	int i;
- 
--	ccbvid = rd_reg32(&ctrl->perfmon.ccb_id);
-+	ccbvid = rd_reg32(&perfmon->ccb_id);
- 	era = (ccbvid & CCBVID_ERA_MASK) >> CCBVID_ERA_SHIFT;
- 	if (era)	/* This is '0' prior to CAAM ERA-6 */
- 		return era;
- 
--	id_ms = rd_reg32(&ctrl->perfmon.caam_id_ms);
-+	id_ms = rd_reg32(&perfmon->caam_id_ms);
- 	ip_id = (id_ms & SECVID_MS_IPID_MASK) >> SECVID_MS_IPID_SHIFT;
- 	maj_rev = (id_ms & SECVID_MS_MAJ_REV_MASK) >> SECVID_MS_MAJ_REV_SHIFT;
- 
-@@ -428,7 +428,7 @@ static int caam_get_era_from_hw(struct c
-  * In case this property is not passed an attempt to retrieve the CAAM
-  * era via register reads will be made.
-  **/
--static int caam_get_era(struct caam_ctrl __iomem *ctrl)
-+static int caam_get_era(struct caam_perfmon __iomem *perfmon)
- {
- 	struct device_node *caam_node;
- 	int ret;
-@@ -441,7 +441,7 @@ static int caam_get_era(struct caam_ctrl
- 	if (!ret)
- 		return prop;
- 	else
--		return caam_get_era_from_hw(ctrl);
-+		return caam_get_era_from_hw(perfmon);
- }
- 
- /*
-@@ -575,8 +575,8 @@ static int caam_probe(struct platform_de
- 	struct device_node *nprop, *np;
- 	struct caam_ctrl __iomem *ctrl;
- 	struct caam_drv_private *ctrlpriv;
-+	struct caam_perfmon __iomem *perfmon;
- #ifdef CONFIG_DEBUG_FS
--	struct caam_perfmon *perfmon;
- 	struct dentry *dfs_root;
- #endif
- 	u32 scfgr, comp_params;
-@@ -616,9 +616,36 @@ static int caam_probe(struct platform_de
- 		return ret;
- 	}
- 
--	caam_little_end = !(bool)(rd_reg32(&ctrl->perfmon.status) &
-+	ring = 0;
-+	for_each_available_child_of_node(nprop, np)
-+		if (of_device_is_compatible(np, "fsl,sec-v4.0-job-ring") ||
-+		    of_device_is_compatible(np, "fsl,sec4.0-job-ring")) {
-+			u32 reg;
-+
-+			if (of_property_read_u32_index(np, "reg", 0, &reg)) {
-+				dev_err(dev, "%s read reg property error\n",
-+					np->full_name);
-+				continue;
-+			}
-+
-+			ctrlpriv->jr[ring] = (struct caam_job_ring __iomem __force *)
-+					     ((__force uint8_t *)ctrl + reg);
-+
-+			ctrlpriv->total_jobrs++;
-+			ring++;
-+		}
-+
-+	/*
-+	 * Wherever possible, instead of accessing registers from the global page,
-+	 * use the alias registers in the first (cf. DT nodes order)
-+	 * job ring's page.
-+	 */
-+	perfmon = ring ? (struct caam_perfmon *)&ctrlpriv->jr[0]->perfmon :
-+			 (struct caam_perfmon *)&ctrl->perfmon;
-+
-+	caam_little_end = !(bool)(rd_reg32(&perfmon->status) &
- 				  (CSTA_PLEND | CSTA_ALT_PLEND));
--	comp_params = rd_reg32(&ctrl->perfmon.comp_parms_ms);
-+	comp_params = rd_reg32(&perfmon->comp_parms_ms);
- 	if (comp_params & CTPR_MS_PS && rd_reg32(&ctrl->mcr) & MCFGR_LONG_PTR)
- 		caam_ptr_sz = sizeof(u64);
- 	else
-@@ -718,7 +745,7 @@ static int caam_probe(struct platform_de
- 		return ret;
- 	}
- 
--	ctrlpriv->era = caam_get_era(ctrl);
-+	ctrlpriv->era = caam_get_era(perfmon);
- 	ctrlpriv->domain = iommu_get_domain_for_dev(dev);
- 
- #ifdef CONFIG_DEBUG_FS
-@@ -727,8 +754,6 @@ static int caam_probe(struct platform_de
- 	 * "caam" and nprop->full_name. The OF name isn't distinctive,
- 	 * but does separate instances
- 	 */
--	perfmon = (struct caam_perfmon __force *)&ctrl->perfmon;
--
- 	dfs_root = debugfs_create_dir(dev_name(dev), NULL);
- 	ret = devm_add_action_or_reset(dev, caam_remove_debugfs, dfs_root);
- 	if (ret)
-@@ -754,31 +779,24 @@ static int caam_probe(struct platform_de
- #endif
- 	}
- 
--	ring = 0;
--	for_each_available_child_of_node(nprop, np)
--		if (of_device_is_compatible(np, "fsl,sec-v4.0-job-ring") ||
--		    of_device_is_compatible(np, "fsl,sec4.0-job-ring")) {
--			ctrlpriv->jr[ring] = (struct caam_job_ring __iomem __force *)
--					     ((__force uint8_t *)ctrl +
--					     (ring + JR_BLOCK_NUMBER) *
--					      BLOCK_OFFSET
--					     );
--			ctrlpriv->total_jobrs++;
--			ring++;
--		}
--
- 	/* If no QI and no rings specified, quit and go home */
- 	if ((!ctrlpriv->qi_present) && (!ctrlpriv->total_jobrs)) {
- 		dev_err(dev, "no queues configured, terminating\n");
- 		return -ENOMEM;
- 	}
- 
--	if (ctrlpriv->era < 10)
--		rng_vid = (rd_reg32(&ctrl->perfmon.cha_id_ls) &
-+	if (ctrlpriv->era < 10) {
-+		rng_vid = (rd_reg32(&perfmon->cha_id_ls) &
- 			   CHA_ID_LS_RNG_MASK) >> CHA_ID_LS_RNG_SHIFT;
--	else
--		rng_vid = (rd_reg32(&ctrl->vreg.rng) & CHA_VER_VID_MASK) >>
-+	} else {
-+		struct version_regs __iomem *vreg;
-+
-+		vreg = ring ? (struct version_regs *)&ctrlpriv->jr[0]->vreg :
-+			      (struct version_regs *)&ctrl->vreg;
-+
-+		rng_vid = (rd_reg32(&vreg->rng) & CHA_VER_VID_MASK) >>
- 			   CHA_VER_VID_SHIFT;
-+	}
- 
- 	/*
- 	 * If SEC has RNG version >= 4 and RNG state handle has not been
-@@ -847,8 +865,8 @@ static int caam_probe(struct platform_de
- 
- 	/* NOTE: RTIC detection ought to go here, around Si time */
- 
--	caam_id = (u64)rd_reg32(&ctrl->perfmon.caam_id_ms) << 32 |
--		  (u64)rd_reg32(&ctrl->perfmon.caam_id_ls);
-+	caam_id = (u64)rd_reg32(&perfmon->caam_id_ms) << 32 |
-+		  (u64)rd_reg32(&perfmon->caam_id_ls);
- 
- 	/* Report "alive" for developer to see */
- 	dev_info(dev, "device ID = 0x%016llx (Era %d)\n", caam_id,
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0017-MLKU-114-2-crypto-caam-SCU-firmware-support.patch b/target/linux/layerscape/patches-5.4/804-crypto-0017-MLKU-114-2-crypto-caam-SCU-firmware-support.patch
deleted file mode 100644
index 9ff30d82a5..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0017-MLKU-114-2-crypto-caam-SCU-firmware-support.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From b752c8ed4ab83d47a585c363056d64fb978ef481 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Horia=20Geant=C4=83?= <horia.geanta@nxp.com>
-Date: Fri, 27 Sep 2019 20:05:26 +0300
-Subject: [PATCH] MLKU-114-2 crypto: caam - SCU firmware support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some i.MX8 processors, e.g. i.MX8QM (QM, QP), i.MX8QX (QXP, DX) have a
-System Controller Firmware (SCFW) running on a dedicated Cortex-M core
-that provides power, clock, and resource management.
-
-caam driver needs to be aware of SCU f/w presence, since some things
-are done differently:
-
-1. clocks are under SCU f/w control and are turned on automatically
-
-2. there is no access to controller's register page (note however that
-some registers are aliased in job rings' register pages)
-
-It's worth mentioning that due to this, MCFGR[PS] cannot be read
-and driver assumes MCFGR[PS] = b'0 - engine using 32-bit address pointers.
-This is in sync with the limitation imposed by the
-SECO (Security Controller) ROM and f/w running on a dedicated Cortex-M.
-
-3. as a consequence of "2.", part of the initialization is moved in
-other f/w (SCU, TF-A etc.), e.g. RNG initialization
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/ctrl.c   | 28 ++++++++++++++++++++++++++--
- drivers/crypto/caam/intern.h |  1 +
- 2 files changed, 27 insertions(+), 2 deletions(-)
-
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -596,6 +596,17 @@ static int caam_probe(struct platform_de
- 	caam_imx = (bool)imx_soc_match;
- 
- 	if (imx_soc_match) {
-+		np = of_find_compatible_node(NULL, NULL, "fsl,imx-scu");
-+		ctrlpriv->scu_en = !!np;
-+		of_node_put(np);
-+
-+		/*
-+		 * CAAM clocks cannot be controlled from kernel.
-+		 * They are automatically turned on by SCU f/w.
-+		 */
-+		if (ctrlpriv->scu_en)
-+			goto iomap_ctrl;
-+
- 		if (!imx_soc_match->data) {
- 			dev_err(dev, "No clock data provided for i.MX SoC");
- 			return -EINVAL;
-@@ -606,7 +617,7 @@ static int caam_probe(struct platform_de
- 			return ret;
- 	}
- 
--
-+iomap_ctrl:
- 	/* Get configuration properties from device tree */
- 	/* First, get register page */
- 	ctrl = devm_of_iomap(dev, nprop, 0, NULL);
-@@ -646,7 +657,8 @@ static int caam_probe(struct platform_de
- 	caam_little_end = !(bool)(rd_reg32(&perfmon->status) &
- 				  (CSTA_PLEND | CSTA_ALT_PLEND));
- 	comp_params = rd_reg32(&perfmon->comp_parms_ms);
--	if (comp_params & CTPR_MS_PS && rd_reg32(&ctrl->mcr) & MCFGR_LONG_PTR)
-+	if (!ctrlpriv->scu_en && comp_params & CTPR_MS_PS &&
-+	    rd_reg32(&ctrl->mcr) & MCFGR_LONG_PTR)
- 		caam_ptr_sz = sizeof(u64);
- 	else
- 		caam_ptr_sz = sizeof(u32);
-@@ -696,6 +708,9 @@ static int caam_probe(struct platform_de
- 	/* Get the IRQ of the controller (for security violations only) */
- 	ctrlpriv->secvio_irq = irq_of_parse_and_map(nprop, 0);
- 
-+	if (ctrlpriv->scu_en)
-+		goto set_dma_mask;
-+
- 	/*
- 	 * Enable DECO watchdogs and, if this is a PHYS_ADDR_T_64BIT kernel,
- 	 * long pointers in master configuration register.
-@@ -739,6 +754,7 @@ static int caam_probe(struct platform_de
- 			      JRSTART_JR1_START | JRSTART_JR2_START |
- 			      JRSTART_JR3_START);
- 
-+set_dma_mask:
- 	ret = dma_set_mask_and_coherent(dev, caam_get_dma_mask(dev));
- 	if (ret) {
- 		dev_err(dev, "dma_set_mask_and_coherent failed (%d)\n", ret);
-@@ -785,6 +801,9 @@ static int caam_probe(struct platform_de
- 		return -ENOMEM;
- 	}
- 
-+	if (ctrlpriv->scu_en)
-+		goto report_live;
-+
- 	if (ctrlpriv->era < 10) {
- 		rng_vid = (rd_reg32(&perfmon->cha_id_ls) &
- 			   CHA_ID_LS_RNG_MASK) >> CHA_ID_LS_RNG_SHIFT;
-@@ -865,6 +884,7 @@ static int caam_probe(struct platform_de
- 
- 	/* NOTE: RTIC detection ought to go here, around Si time */
- 
-+report_live:
- 	caam_id = (u64)rd_reg32(&perfmon->caam_id_ms) << 32 |
- 		  (u64)rd_reg32(&perfmon->caam_id_ls);
- 
-@@ -908,6 +928,9 @@ static int caam_probe(struct platform_de
- 			    ctrlpriv->ctl, &perfmon->status,
- 			    &caam_fops_u32_ro);
- 
-+	if (ctrlpriv->scu_en)
-+		goto probe_jrs;
-+
- 	/* Internal covering keys (useful in non-secure mode only) */
- 	ctrlpriv->ctl_kek_wrap.data = (__force void *)&ctrlpriv->ctrl->kek[0];
- 	ctrlpriv->ctl_kek_wrap.size = KEK_KEY_SIZE * sizeof(u32);
-@@ -925,6 +948,7 @@ static int caam_probe(struct platform_de
- 			    &ctrlpriv->ctl_tdsk_wrap);
- #endif
- 
-+probe_jrs:
- 	ret = devm_of_platform_populate(dev);
- 	if (ret)
- 		dev_err(dev, "JR platform devices creation error\n");
---- a/drivers/crypto/caam/intern.h
-+++ b/drivers/crypto/caam/intern.h
-@@ -82,6 +82,7 @@ struct caam_drv_private {
- 	u8 total_jobrs;		/* Total Job Rings in device */
- 	u8 qi_present;		/* Nonzero if QI present in device */
- 	u8 mc_en;		/* Nonzero if MC f/w is active */
-+	u8 scu_en;		/* Nonzero if SCU f/w is active */
- 	int secvio_irq;		/* Security violation interrupt number */
- 	int virt_en;		/* Virtualization enabled in CAAM */
- 	int era;		/* CAAM Era (internal HW revision) */
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0018-MLKU-114-3-crypto-caam-OP-TEE-firmware-support.patch b/target/linux/layerscape/patches-5.4/804-crypto-0018-MLKU-114-3-crypto-caam-OP-TEE-firmware-support.patch
deleted file mode 100644
index 7e71fdc955..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0018-MLKU-114-3-crypto-caam-OP-TEE-firmware-support.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From 8a0bf079f870379a1e392819ac1116d74500ec01 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Horia=20Geant=C4=83?= <horia.geanta@nxp.com>
-Date: Fri, 4 Oct 2019 15:07:41 +0300
-Subject: [PATCH] MLKU-114-3 crypto: caam - OP-TEE firmware support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-caam driver needs to be aware of OP-TEE f/w presence, since some things
-are done differently:
-
-1. there is no access to controller's register page (note however that
-some registers are aliased in job rings' register pages)
-
-It's worth mentioning that due to this, MCFGR[PS] cannot be read
-and driver assumes MCFGR[PS] = b'0 - engine using 32-bit address pointers.
-
-This is in sync with the fact that:
--all i.MX SoCs currently use MCFGR[PS] = b'0
--only i.MX OP-TEE use cases don't allow access to controller register page
-
-Note: When DN OP-TEE will start enforcing the same policy,
-this solution will stop working and information about caam configuration
-will have to deduced in some other way.
-
-2. as a consequence of "1.", part of the initialization is moved in
-other f/w (TF-A etc.), e.g. RNG initialization
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/ctrl.c   | 22 ++++++++++++++++++----
- drivers/crypto/caam/intern.h |  1 +
- 2 files changed, 19 insertions(+), 4 deletions(-)
-
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -583,6 +583,7 @@ static int caam_probe(struct platform_de
- 	u8 rng_vid;
- 	int pg_size;
- 	int BLOCK_OFFSET = 0;
-+	bool reg_access = true;
- 
- 	ctrlpriv = devm_kzalloc(&pdev->dev, sizeof(*ctrlpriv), GFP_KERNEL);
- 	if (!ctrlpriv)
-@@ -600,6 +601,8 @@ static int caam_probe(struct platform_de
- 		ctrlpriv->scu_en = !!np;
- 		of_node_put(np);
- 
-+		reg_access = !ctrlpriv->scu_en;
-+
- 		/*
- 		 * CAAM clocks cannot be controlled from kernel.
- 		 * They are automatically turned on by SCU f/w.
-@@ -607,6 +610,17 @@ static int caam_probe(struct platform_de
- 		if (ctrlpriv->scu_en)
- 			goto iomap_ctrl;
- 
-+		/*
-+		 * Until Layerscape and i.MX OP-TEE get in sync,
-+		 * only i.MX OP-TEE use cases disallow access to
-+		 * caam page 0 (controller) registers.
-+		 */
-+		np = of_find_compatible_node(NULL, NULL, "linaro,optee-tz");
-+		ctrlpriv->optee_en = !!np;
-+		of_node_put(np);
-+
-+		reg_access = reg_access && !ctrlpriv->optee_en;
-+
- 		if (!imx_soc_match->data) {
- 			dev_err(dev, "No clock data provided for i.MX SoC");
- 			return -EINVAL;
-@@ -657,7 +671,7 @@ iomap_ctrl:
- 	caam_little_end = !(bool)(rd_reg32(&perfmon->status) &
- 				  (CSTA_PLEND | CSTA_ALT_PLEND));
- 	comp_params = rd_reg32(&perfmon->comp_parms_ms);
--	if (!ctrlpriv->scu_en && comp_params & CTPR_MS_PS &&
-+	if (reg_access && comp_params & CTPR_MS_PS &&
- 	    rd_reg32(&ctrl->mcr) & MCFGR_LONG_PTR)
- 		caam_ptr_sz = sizeof(u64);
- 	else
-@@ -708,7 +722,7 @@ iomap_ctrl:
- 	/* Get the IRQ of the controller (for security violations only) */
- 	ctrlpriv->secvio_irq = irq_of_parse_and_map(nprop, 0);
- 
--	if (ctrlpriv->scu_en)
-+	if (!reg_access)
- 		goto set_dma_mask;
- 
- 	/*
-@@ -801,7 +815,7 @@ set_dma_mask:
- 		return -ENOMEM;
- 	}
- 
--	if (ctrlpriv->scu_en)
-+	if (!reg_access)
- 		goto report_live;
- 
- 	if (ctrlpriv->era < 10) {
-@@ -928,7 +942,7 @@ report_live:
- 			    ctrlpriv->ctl, &perfmon->status,
- 			    &caam_fops_u32_ro);
- 
--	if (ctrlpriv->scu_en)
-+	if (!reg_access)
- 		goto probe_jrs;
- 
- 	/* Internal covering keys (useful in non-secure mode only) */
---- a/drivers/crypto/caam/intern.h
-+++ b/drivers/crypto/caam/intern.h
-@@ -83,6 +83,7 @@ struct caam_drv_private {
- 	u8 qi_present;		/* Nonzero if QI present in device */
- 	u8 mc_en;		/* Nonzero if MC f/w is active */
- 	u8 scu_en;		/* Nonzero if SCU f/w is active */
-++	u8 optee_en;		/* Nonzero if OP-TEE f/w is active */
- 	int secvio_irq;		/* Security violation interrupt number */
- 	int virt_en;		/* Virtualization enabled in CAAM */
- 	int era;		/* CAAM Era (internal HW revision) */
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0019-MLKU-38-3-crypto-caam-add-SNVS-SECVIO-support.patch b/target/linux/layerscape/patches-5.4/804-crypto-0019-MLKU-38-3-crypto-caam-add-SNVS-SECVIO-support.patch
deleted file mode 100644
index fc48884cd1..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0019-MLKU-38-3-crypto-caam-add-SNVS-SECVIO-support.patch
+++ /dev/null
@@ -1,784 +0,0 @@
-From 03ec635be0eb1c1b63b1f631938d41b379dad637 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Horia=20Geant=C4=83?= <horia.geanta@nxp.com>
-Date: Mon, 30 Sep 2019 00:22:09 +0300
-Subject: [PATCH] MLKU-38-3 crypto: caam - add SNVS / SECVIO support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is a squash of the following i.MX BSP commits
-(rel_imx_4.19.35_1.1.0_rc2)
-
-1. 8f6a17b41917 ("ENGR00289885 [iMX6Q] Add Secure Memory and SECVIO support.")
-2. 8433c811e97a ("MLK-9710-18 snvs - make SECVIO module device tree correct")
-3. 35bbc34e996b ("MLK-9769-23 Replace SECVIO of_irq_to_resource() with irq_of_parse_and_map()")
-4. 3ac6edcd92d4 ("MLK-11360-01 crypto: caam_snvs: add snvs clock management")
-5. 9d9ca7a03e3b ("MLK-11922 i.mx6: Linux 3.14.28 CAAM & SNVS enabled by default. JTAG, DS-5 attachment causes exceptions")
-6. fcdaabf1bba2 ("MLK-17412-01: Fix secvio driver to have same driver name as DTS")
-
-Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
-Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
-Signed-off-by: Steve Cornelius <steve.cornelius@nxp.com>
-Signed-off-by: Fugang Duan <andy.duan@nxp.com>
-Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
-
-that have been reworked:
-
-1.
--make SM depend on JR
--enable SM, SECVIO only on i.MX SoCs
--fix resource leak - add off_node_put() where needed
-
-Split commit in three:
-- SNVS/SECVIO driver
-- Secure Memory driver
-- DT changes
-
-3.
-JR changes dropped - no longer needed, already upstream in
-commit 549077d7d86a1 ("crypto: caam - check irq_of_parse_and_map for errors")
-
-4.
-Split the patch in two:
--DT bindings changes
--driver changes
-
-5.
-Fixed conflicts in imx7d.dtsi - added caam_sm and irq_sec_vio nodes.
-
-Split commit in 3:
--SECVIO/SNVS driver changes
--SECVIO/SNVS DT changes
--Secure Memory DT changes
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/Kconfig    |   7 +
- drivers/crypto/caam/Makefile   |   1 +
- drivers/crypto/caam/ctrl.c     |   3 -
- drivers/crypto/caam/intern.h   |   4 +-
- drivers/crypto/caam/secvio.c   | 342 +++++++++++++++++++++++++++++++++++++++++
- drivers/crypto/caam/secvio.h   |  69 +++++++++
- drivers/crypto/caam/snvsregs.h | 239 ++++++++++++++++++++++++++++
- 7 files changed, 660 insertions(+), 5 deletions(-)
- create mode 100644 drivers/crypto/caam/secvio.c
- create mode 100644 drivers/crypto/caam/secvio.h
- create mode 100644 drivers/crypto/caam/snvsregs.h
-
---- a/drivers/crypto/caam/Kconfig
-+++ b/drivers/crypto/caam/Kconfig
-@@ -156,6 +156,13 @@ config CRYPTO_DEV_FSL_CAAM_RNG_TEST
- 	  caam RNG. This test is several minutes long and executes
- 	  just before the RNG is registered with the hw_random API.
- 
-+config CRYPTO_DEV_FSL_CAAM_SECVIO
-+	tristate "CAAM/SNVS Security Violation Handler (EXPERIMENTAL)"
-+	help
-+	  Enables installation of an interrupt handler with registrable
-+          handler functions which can be specified to act on the consequences
-+          of a security violation.
-+
- endif # CRYPTO_DEV_FSL_CAAM_JR
- 
- endif # CRYPTO_DEV_FSL_CAAM
---- a/drivers/crypto/caam/Makefile
-+++ b/drivers/crypto/caam/Makefile
-@@ -21,6 +21,7 @@ caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRY
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API) += caamhash.o
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API) += caampkc.o pkc_desc.o
-+caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_SECVIO) += secvio.o
- 
- caam-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += qi.o
- ifneq ($(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI),)
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -719,9 +719,6 @@ iomap_ctrl:
- 			 BLOCK_OFFSET * DECO_BLOCK_NUMBER
- 			 );
- 
--	/* Get the IRQ of the controller (for security violations only) */
--	ctrlpriv->secvio_irq = irq_of_parse_and_map(nprop, 0);
--
- 	if (!reg_access)
- 		goto set_dma_mask;
- 
---- a/drivers/crypto/caam/intern.h
-+++ b/drivers/crypto/caam/intern.h
-@@ -66,6 +66,7 @@ struct caam_drv_private_jr {
-  * Driver-private storage for a single CAAM block instance
-  */
- struct caam_drv_private {
-+
- 	/* Physical-presence section */
- 	struct caam_ctrl __iomem *ctrl; /* controller region */
- 	struct caam_deco __iomem *deco; /* DECO/CCB views */
-@@ -83,8 +84,7 @@ struct caam_drv_private {
- 	u8 qi_present;		/* Nonzero if QI present in device */
- 	u8 mc_en;		/* Nonzero if MC f/w is active */
- 	u8 scu_en;		/* Nonzero if SCU f/w is active */
--+	u8 optee_en;		/* Nonzero if OP-TEE f/w is active */
--	int secvio_irq;		/* Security violation interrupt number */
-+	u8 optee_en;		/* Nonzero if OP-TEE f/w is active */
- 	int virt_en;		/* Virtualization enabled in CAAM */
- 	int era;		/* CAAM Era (internal HW revision) */
- 
---- /dev/null
-+++ b/drivers/crypto/caam/secvio.c
-@@ -0,0 +1,342 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-+/*
-+ * SNVS Security Violation Handler
-+ *
-+ * Copyright 2012-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017-2019 NXP
-+ */
-+
-+#include "compat.h"
-+#include "secvio.h"
-+#include "regs.h"
-+#include "intern.h"
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+
-+/* The driver is matched with node caam_snvs to get regmap
-+ * It will then retrieve interruption and tamper alarm configuration from
-+ * node caam-secvio searching for the compat string "fsl,imx6q-caam-secvio"
-+ */
-+#define DRIVER_NAME "caam-snvs"
-+
-+/*
-+ * These names are associated with each violation handler.
-+ * The source names were taken from MX6, and are based on recommendations
-+ * for most common SoCs.
-+ */
-+static const u8 *violation_src_name[] = {
-+	"CAAM Internal Security Violation",
-+	"JTAG Alarm",
-+	"Watchdog",
-+	"(reserved)",
-+	"External Boot",
-+	"External Tamper Detect",
-+};
-+
-+/* These names help describe security monitor state for the console */
-+static const u8 *snvs_ssm_state_name[] = {
-+	"init",
-+	"hard fail",
-+	"(undef:2)",
-+	"soft fail",
-+	"(undef:4)",
-+	"(undef:5)",
-+	"(undef:6)",
-+	"(undef:7)",
-+	"transition",
-+	"check",
-+	"(undef:10)",
-+	"non-secure",
-+	"(undef:12)",
-+	"trusted",
-+	"(undef:14)",
-+	"secure",
-+};
-+
-+/* Top-level security violation interrupt */
-+static irqreturn_t snvs_secvio_interrupt(int irq, void *snvsdev)
-+{
-+	struct device *dev = snvsdev;
-+	struct snvs_secvio_drv_private *svpriv = dev_get_drvdata(dev);
-+
-+	clk_enable(svpriv->clk);
-+	/* Check the HP secvio status register */
-+	svpriv->irqcause = rd_reg32(&svpriv->svregs->hp.secvio_status) &
-+				    HP_SECVIOST_SECVIOMASK;
-+
-+	if (!svpriv->irqcause) {
-+		clk_disable(svpriv->clk);
-+		return IRQ_NONE;
-+	}
-+
-+	/* Now ACK cause */
-+	clrsetbits_32(&svpriv->svregs->hp.secvio_status, 0, svpriv->irqcause);
-+
-+	/* And run deferred service */
-+	preempt_disable();
-+	tasklet_schedule(&svpriv->irqtask[smp_processor_id()]);
-+	preempt_enable();
-+
-+	clk_disable(svpriv->clk);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/* Deferred service handler. Tasklet arg is simply the SNVS dev */
-+static void snvs_secvio_dispatch(unsigned long indev)
-+{
-+	struct device *dev = (struct device *)indev;
-+	struct snvs_secvio_drv_private *svpriv = dev_get_drvdata(dev);
-+	unsigned long flags;
-+	int i;
-+
-+
-+	/* Look through stored causes, call each handler if exists */
-+	for (i = 0; i < MAX_SECVIO_SOURCES; i++)
-+		if (svpriv->irqcause & (1 << i)) {
-+			spin_lock_irqsave(&svpriv->svlock, flags);
-+			svpriv->intsrc[i].handler(dev, i,
-+						  svpriv->intsrc[i].ext);
-+			spin_unlock_irqrestore(&svpriv->svlock, flags);
-+		};
-+
-+	/* Re-enable now-serviced interrupts */
-+	clrsetbits_32(&svpriv->svregs->hp.secvio_intcfg, 0, svpriv->irqcause);
-+}
-+
-+/*
-+ * Default cause handler, used in lieu of an application-defined handler.
-+ * All it does at this time is print a console message. It could force a halt.
-+ */
-+static void snvs_secvio_default(struct device *dev, u32 cause, void *ext)
-+{
-+	struct snvs_secvio_drv_private *svpriv = dev_get_drvdata(dev);
-+
-+	dev_err(dev, "Unhandled Security Violation Interrupt %d = %s\n",
-+		cause, svpriv->intsrc[cause].intname);
-+}
-+
-+/*
-+ * Install an application-defined handler for a specified cause
-+ * Arguments:
-+ * - dev        points to SNVS-owning device
-+ * - cause      interrupt source cause
-+ * - handler    application-defined handler, gets called with dev
-+ *              source cause, and locally-defined handler argument
-+ * - cause_description   points to a string to override the default cause
-+ *                       name, this can be used as an alternate for error
-+ *                       messages and such. If left NULL, the default
-+ *                       description string is used.
-+ * - ext        pointer to any extra data needed by the handler.
-+ */
-+int snvs_secvio_install_handler(struct device *dev, enum secvio_cause cause,
-+				void (*handler)(struct device *dev, u32 cause,
-+						void *ext),
-+				u8 *cause_description, void *ext)
-+{
-+	unsigned long flags;
-+	struct snvs_secvio_drv_private *svpriv;
-+
-+	svpriv = dev_get_drvdata(dev);
-+
-+	if ((handler == NULL) || (cause > SECVIO_CAUSE_SOURCE_5))
-+		return -EINVAL;
-+
-+	spin_lock_irqsave(&svpriv->svlock, flags);
-+	svpriv->intsrc[cause].handler = handler;
-+	if (cause_description != NULL)
-+		svpriv->intsrc[cause].intname = cause_description;
-+	if (ext != NULL)
-+		svpriv->intsrc[cause].ext = ext;
-+	spin_unlock_irqrestore(&svpriv->svlock, flags);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(snvs_secvio_install_handler);
-+
-+/*
-+ * Remove an application-defined handler for a specified cause (and, by
-+ * implication, restore the "default".
-+ * Arguments:
-+ * - dev	points to SNVS-owning device
-+ * - cause	interrupt source cause
-+ */
-+int snvs_secvio_remove_handler(struct device *dev, enum secvio_cause cause)
-+{
-+	unsigned long flags;
-+	struct snvs_secvio_drv_private *svpriv;
-+
-+	svpriv = dev_get_drvdata(dev);
-+
-+	if (cause > SECVIO_CAUSE_SOURCE_5)
-+		return -EINVAL;
-+
-+	spin_lock_irqsave(&svpriv->svlock, flags);
-+	svpriv->intsrc[cause].intname = violation_src_name[cause];
-+	svpriv->intsrc[cause].handler = snvs_secvio_default;
-+	svpriv->intsrc[cause].ext = NULL;
-+	spin_unlock_irqrestore(&svpriv->svlock, flags);
-+	return 0;
-+}
-+EXPORT_SYMBOL(snvs_secvio_remove_handler);
-+
-+static int snvs_secvio_remove(struct platform_device *pdev)
-+{
-+	struct device *svdev;
-+	struct snvs_secvio_drv_private *svpriv;
-+	int i;
-+
-+	svdev = &pdev->dev;
-+	svpriv = dev_get_drvdata(svdev);
-+
-+	clk_enable(svpriv->clk);
-+	/* Set all sources to nonfatal */
-+	wr_reg32(&svpriv->svregs->hp.secvio_intcfg, 0);
-+
-+	/* Remove tasklets and release interrupt */
-+	for_each_possible_cpu(i)
-+		tasklet_kill(&svpriv->irqtask[i]);
-+
-+	clk_disable_unprepare(svpriv->clk);
-+	free_irq(svpriv->irq, svdev);
-+	iounmap(svpriv->svregs);
-+	kfree(svpriv);
-+
-+	return 0;
-+}
-+
-+static int snvs_secvio_probe(struct platform_device *pdev)
-+{
-+	struct device *svdev;
-+	struct snvs_secvio_drv_private *svpriv;
-+	struct device_node *np, *npirq;
-+	struct snvs_full __iomem *snvsregs;
-+	int i, error;
-+	u32 hpstate;
-+	const void *jtd, *wtd, *itd, *etd;
-+	u32 td_en;
-+
-+	svpriv = kzalloc(sizeof(struct snvs_secvio_drv_private), GFP_KERNEL);
-+	if (!svpriv)
-+		return -ENOMEM;
-+
-+	svdev = &pdev->dev;
-+	dev_set_drvdata(svdev, svpriv);
-+	svpriv->pdev = pdev;
-+	np = pdev->dev.of_node;
-+
-+	npirq = of_find_compatible_node(NULL, NULL, "fsl,imx6q-caam-secvio");
-+	if (!npirq) {
-+		dev_err(svdev, "can't find secvio node\n");
-+		kfree(svpriv);
-+		return -EINVAL;
-+	}
-+	svpriv->irq = irq_of_parse_and_map(npirq, 0);
-+	if (svpriv->irq <= 0) {
-+		dev_err(svdev, "can't identify secvio interrupt\n");
-+		kfree(svpriv);
-+		return -EINVAL;
-+	}
-+
-+	jtd = of_get_property(npirq, "jtag-tamper", NULL);
-+	wtd = of_get_property(npirq, "watchdog-tamper", NULL);
-+	itd = of_get_property(npirq, "internal-boot-tamper", NULL);
-+	etd = of_get_property(npirq, "external-pin-tamper", NULL);
-+	if (!jtd | !wtd | !itd | !etd ) {
-+		dev_err(svdev, "can't identify all tamper alarm configuration\n");
-+		kfree(svpriv);
-+		return -EINVAL;
-+	}
-+
-+	/*
-+	 * Configure all sources  according to device tree property.
-+	 * If the property is enabled then the source is ser as
-+	 * fatal violations except LP section,
-+	 * source #5 (typically used as an external tamper detect), and
-+	 * source #3 (typically unused). Whenever the transition to
-+	 * secure mode has occurred, these will now be "fatal" violations
-+	 */
-+	td_en = HP_SECVIO_INTEN_SRC0;
-+	if (!strcmp(jtd, "enabled"))
-+		td_en |= HP_SECVIO_INTEN_SRC1;
-+	if (!strcmp(wtd, "enabled"))
-+		td_en |= HP_SECVIO_INTEN_SRC2;
-+	if (!strcmp(itd, "enabled"))
-+		td_en |= HP_SECVIO_INTEN_SRC4;
-+	if (!strcmp(etd, "enabled"))
-+		td_en |= HP_SECVIO_INTEN_SRC5;
-+
-+	snvsregs = of_iomap(np, 0);
-+	if (!snvsregs) {
-+		dev_err(svdev, "register mapping failed\n");
-+		return -ENOMEM;
-+	}
-+	svpriv->svregs = (struct snvs_full __force *)snvsregs;
-+
-+	svpriv->clk = devm_clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(svpriv->clk)) {
-+		dev_err(&pdev->dev, "can't get snvs clock\n");
-+		svpriv->clk = NULL;
-+	}
-+
-+	/* Write the Secvio Enable Config the SVCR */
-+	wr_reg32(&svpriv->svregs->hp.secvio_ctl, td_en);
-+	wr_reg32(&svpriv->svregs->hp.secvio_intcfg, td_en);
-+
-+	 /* Device data set up. Now init interrupt source descriptions */
-+	for (i = 0; i < MAX_SECVIO_SOURCES; i++) {
-+		svpriv->intsrc[i].intname = violation_src_name[i];
-+		svpriv->intsrc[i].handler = snvs_secvio_default;
-+	}
-+	/* Connect main handler */
-+	for_each_possible_cpu(i)
-+		tasklet_init(&svpriv->irqtask[i], snvs_secvio_dispatch,
-+			     (unsigned long)svdev);
-+
-+	error = request_irq(svpriv->irq, snvs_secvio_interrupt,
-+			    IRQF_SHARED, DRIVER_NAME, svdev);
-+	if (error) {
-+		dev_err(svdev, "can't connect secvio interrupt\n");
-+		irq_dispose_mapping(svpriv->irq);
-+		svpriv->irq = 0;
-+		iounmap(svpriv->svregs);
-+		kfree(svpriv);
-+		return -EINVAL;
-+	}
-+
-+	clk_prepare_enable(svpriv->clk);
-+
-+	hpstate = (rd_reg32(&svpriv->svregs->hp.status) &
-+			    HP_STATUS_SSM_ST_MASK) >> HP_STATUS_SSM_ST_SHIFT;
-+	dev_info(svdev, "violation handlers armed - %s state\n",
-+		 snvs_ssm_state_name[hpstate]);
-+
-+	clk_disable(svpriv->clk);
-+
-+	return 0;
-+}
-+
-+static struct of_device_id snvs_secvio_match[] = {
-+	{
-+		.compatible = "fsl,imx6q-caam-snvs",
-+	},
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, snvs_secvio_match);
-+
-+static struct platform_driver snvs_secvio_driver = {
-+	.driver = {
-+		.name = DRIVER_NAME,
-+		.owner = THIS_MODULE,
-+		.of_match_table = snvs_secvio_match,
-+	},
-+	.probe       = snvs_secvio_probe,
-+	.remove      = snvs_secvio_remove,
-+};
-+
-+module_platform_driver(snvs_secvio_driver);
-+
-+MODULE_LICENSE("Dual BSD/GPL");
-+MODULE_DESCRIPTION("FSL SNVS Security Violation Handler");
-+MODULE_AUTHOR("Freescale Semiconductor - MCU");
---- /dev/null
-+++ b/drivers/crypto/caam/secvio.h
-@@ -0,0 +1,69 @@
-+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-+/*
-+ * CAAM Security Violation Handler
-+ *
-+ * Copyright 2012-2015 Freescale Semiconductor, Inc.
-+ * Copyright 2016-2019 NXP
-+ */
-+
-+#ifndef SECVIO_H
-+#define SECVIO_H
-+
-+#include "snvsregs.h"
-+
-+
-+/*
-+ * Defines the published interfaces to install/remove application-specified
-+ * handlers for catching violations
-+ */
-+
-+#define MAX_SECVIO_SOURCES 6
-+
-+/* these are the untranslated causes */
-+enum secvio_cause {
-+	SECVIO_CAUSE_SOURCE_0,
-+	SECVIO_CAUSE_SOURCE_1,
-+	SECVIO_CAUSE_SOURCE_2,
-+	SECVIO_CAUSE_SOURCE_3,
-+	SECVIO_CAUSE_SOURCE_4,
-+	SECVIO_CAUSE_SOURCE_5
-+};
-+
-+/* These are common "recommended" cause definitions for most devices */
-+#define SECVIO_CAUSE_CAAM_VIOLATION	SECVIO_CAUSE_SOURCE_0
-+#define SECVIO_CAUSE_JTAG_ALARM		SECVIO_CAUSE_SOURCE_1
-+#define SECVIO_CAUSE_WATCHDOG		SECVIO_CAUSE_SOURCE_2
-+#define SECVIO_CAUSE_EXTERNAL_BOOT	SECVIO_CAUSE_SOURCE_4
-+#define SECVIO_CAUSE_TAMPER_DETECT	SECVIO_CAUSE_SOURCE_5
-+
-+int snvs_secvio_install_handler(struct device *dev, enum secvio_cause cause,
-+				void (*handler)(struct device *dev, u32 cause,
-+						void *ext),
-+				u8 *cause_description, void *ext);
-+int snvs_secvio_remove_handler(struct device *dev, enum  secvio_cause cause);
-+
-+/*
-+ * Private data definitions for the secvio "driver"
-+ */
-+
-+struct secvio_int_src {
-+	const u8 *intname;	/* Points to a descriptive name for source */
-+	void *ext;		/* Extended data to pass to the handler */
-+	void (*handler)(struct device *dev, u32 cause, void *ext);
-+};
-+
-+struct snvs_secvio_drv_private {
-+	struct platform_device *pdev;
-+	spinlock_t svlock ____cacheline_aligned;
-+	struct tasklet_struct irqtask[NR_CPUS];
-+	struct snvs_full __iomem *svregs;	/* both HP and LP domains */
-+	struct clk *clk;
-+	int irq;
-+	u32 irqcause; /* stashed cause of violation interrupt */
-+
-+	/* Registered handlers for each violation */
-+	struct secvio_int_src intsrc[MAX_SECVIO_SOURCES];
-+
-+};
-+
-+#endif /* SECVIO_H */
---- /dev/null
-+++ b/drivers/crypto/caam/snvsregs.h
-@@ -0,0 +1,239 @@
-+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-+/*
-+ * SNVS hardware register-level view
-+ *
-+ * Copyright 2012-2015 Freescale Semiconductor, Inc.
-+ * Copyright 2016-2019 NXP
-+ */
-+
-+#ifndef SNVSREGS_H
-+#define SNVSREGS_H
-+
-+#include <linux/types.h>
-+#include <linux/io.h>
-+
-+/*
-+ * SNVS High Power Domain
-+ * Includes security violations, HA counter, RTC, alarm
-+ */
-+struct snvs_hp {
-+	u32 lock;		/* HPLR - HP Lock */
-+	u32 cmd;		/* HPCOMR - HP Command */
-+	u32 ctl;		/* HPCR - HP Control */
-+	u32 secvio_intcfg;	/* HPSICR - Security Violation Int Config */
-+	u32 secvio_ctl;		/* HPSVCR - Security Violation Control */
-+	u32 status;		/* HPSR - HP Status */
-+	u32 secvio_status;	/* HPSVSR - Security Violation Status */
-+	u32 ha_counteriv;	/* High Assurance Counter IV */
-+	u32 ha_counter;		/* High Assurance Counter */
-+	u32 rtc_msb;		/* Real Time Clock/Counter MSB */
-+	u32 rtc_lsb;		/* Real Time Counter LSB */
-+	u32 time_alarm_msb;	/* Time Alarm MSB */
-+	u32 time_alarm_lsb;	/* Time Alarm LSB */
-+};
-+
-+#define HP_LOCK_HAC_LCK		0x00040000
-+#define HP_LOCK_HPSICR_LCK	0x00020000
-+#define HP_LOCK_HPSVCR_LCK	0x00010000
-+#define HP_LOCK_MKEYSEL_LCK	0x00000200
-+#define HP_LOCK_TAMPCFG_LCK	0x00000100
-+#define HP_LOCK_TAMPFLT_LCK	0x00000080
-+#define HP_LOCK_SECVIO_LCK	0x00000040
-+#define HP_LOCK_GENP_LCK	0x00000020
-+#define HP_LOCK_MONOCTR_LCK	0x00000010
-+#define HP_LOCK_CALIB_LCK	0x00000008
-+#define HP_LOCK_SRTC_LCK	0x00000004
-+#define HP_LOCK_ZMK_RD_LCK	0x00000002
-+#define HP_LOCK_ZMK_WT_LCK	0x00000001
-+
-+#define HP_CMD_NONPRIV_AXS	0x80000000
-+#define HP_CMD_HAC_STOP		0x00080000
-+#define HP_CMD_HAC_CLEAR	0x00040000
-+#define HP_CMD_HAC_LOAD		0x00020000
-+#define HP_CMD_HAC_CFG_EN	0x00010000
-+#define HP_CMD_SNVS_MSTR_KEY	0x00002000
-+#define HP_CMD_PROG_ZMK		0x00001000
-+#define HP_CMD_SW_LPSV		0x00000400
-+#define HP_CMD_SW_FSV		0x00000200
-+#define HP_CMD_SW_SV		0x00000100
-+#define HP_CMD_LP_SWR_DIS	0x00000020
-+#define HP_CMD_LP_SWR		0x00000010
-+#define HP_CMD_SSM_SFNS_DIS	0x00000004
-+#define HP_CMD_SSM_ST_DIS	0x00000002
-+#define HP_CMD_SMM_ST		0x00000001
-+
-+#define HP_CTL_TIME_SYNC	0x00010000
-+#define HP_CTL_CAL_VAL_SHIFT	10
-+#define HP_CTL_CAL_VAL_MASK	(0x1f << HP_CTL_CALIB_SHIFT)
-+#define HP_CTL_CALIB_EN		0x00000100
-+#define HP_CTL_PI_FREQ_SHIFT	4
-+#define HP_CTL_PI_FREQ_MASK	(0xf << HP_CTL_PI_FREQ_SHIFT)
-+#define HP_CTL_PI_EN		0x00000008
-+#define HP_CTL_TIMEALARM_EN	0x00000002
-+#define HP_CTL_RTC_EN		0x00000001
-+
-+#define HP_SECVIO_INTEN_EN	0x10000000
-+#define HP_SECVIO_INTEN_SRC5	0x00000020
-+#define HP_SECVIO_INTEN_SRC4	0x00000010
-+#define HP_SECVIO_INTEN_SRC3	0x00000008
-+#define HP_SECVIO_INTEN_SRC2	0x00000004
-+#define HP_SECVIO_INTEN_SRC1	0x00000002
-+#define HP_SECVIO_INTEN_SRC0	0x00000001
-+#define HP_SECVIO_INTEN_ALL	0x8000003f
-+
-+#define HP_SECVIO_ICTL_CFG_SHIFT	30
-+#define HP_SECVIO_ICTL_CFG_MASK		(0x3 << HP_SECVIO_ICTL_CFG_SHIFT)
-+#define HP_SECVIO_ICTL_CFG5_SHIFT	5
-+#define HP_SECVIO_ICTL_CFG5_MASK	(0x3 << HP_SECVIO_ICTL_CFG5_SHIFT)
-+#define HP_SECVIO_ICTL_CFG_DISABLE	0
-+#define HP_SECVIO_ICTL_CFG_NONFATAL	1
-+#define HP_SECVIO_ICTL_CFG_FATAL	2
-+#define HP_SECVIO_ICTL_CFG4_FATAL	0x00000010
-+#define HP_SECVIO_ICTL_CFG3_FATAL	0x00000008
-+#define HP_SECVIO_ICTL_CFG2_FATAL	0x00000004
-+#define HP_SECVIO_ICTL_CFG1_FATAL	0x00000002
-+#define HP_SECVIO_ICTL_CFG0_FATAL	0x00000001
-+
-+#define HP_STATUS_ZMK_ZERO		0x80000000
-+#define HP_STATUS_OTPMK_ZERO		0x08000000
-+#define HP_STATUS_OTPMK_SYN_SHIFT	16
-+#define HP_STATUS_OTPMK_SYN_MASK	(0x1ff << HP_STATUS_OTPMK_SYN_SHIFT)
-+#define HP_STATUS_SSM_ST_SHIFT		8
-+#define HP_STATUS_SSM_ST_MASK		(0xf << HP_STATUS_SSM_ST_SHIFT)
-+#define HP_STATUS_SSM_ST_INIT		0
-+#define HP_STATUS_SSM_ST_HARDFAIL	1
-+#define HP_STATUS_SSM_ST_SOFTFAIL	3
-+#define HP_STATUS_SSM_ST_INITINT	8
-+#define HP_STATUS_SSM_ST_CHECK		9
-+#define HP_STATUS_SSM_ST_NONSECURE	11
-+#define HP_STATUS_SSM_ST_TRUSTED	13
-+#define HP_STATUS_SSM_ST_SECURE		15
-+
-+#define HP_SECVIOST_ZMK_ECC_FAIL	0x08000000	/* write to clear */
-+#define HP_SECVIOST_ZMK_SYN_SHIFT	16
-+#define HP_SECVIOST_ZMK_SYN_MASK	(0x1ff << HP_SECVIOST_ZMK_SYN_SHIFT)
-+#define HP_SECVIOST_SECVIO5		0x00000020
-+#define HP_SECVIOST_SECVIO4		0x00000010
-+#define HP_SECVIOST_SECVIO3		0x00000008
-+#define HP_SECVIOST_SECVIO2		0x00000004
-+#define HP_SECVIOST_SECVIO1		0x00000002
-+#define HP_SECVIOST_SECVIO0		0x00000001
-+#define HP_SECVIOST_SECVIOMASK		0x0000003f
-+
-+/*
-+ * SNVS Low Power Domain
-+ * Includes glitch detector, SRTC, alarm, monotonic counter, ZMK
-+ */
-+struct snvs_lp {
-+	u32 lock;
-+	u32 ctl;
-+	u32 mstr_key_ctl;	/* Master Key Control */
-+	u32 secvio_ctl;		/* Security Violation Control */
-+	u32 tamper_filt_cfg;	/* Tamper Glitch Filters Configuration */
-+	u32 tamper_det_cfg;	/* Tamper Detectors Configuration */
-+	u32 status;
-+	u32 srtc_msb;		/* Secure Real Time Clock/Counter MSB */
-+	u32 srtc_lsb;		/* Secure Real Time Clock/Counter LSB */
-+	u32 time_alarm;		/* Time Alarm */
-+	u32 smc_msb;		/* Secure Monotonic Counter MSB */
-+	u32 smc_lsb;		/* Secure Monotonic Counter LSB */
-+	u32 pwr_glitch_det;	/* Power Glitch Detector */
-+	u32 gen_purpose;
-+	u32 zmk[8];		/* Zeroizable Master Key */
-+};
-+
-+#define LP_LOCK_MKEYSEL_LCK	0x00000200
-+#define LP_LOCK_TAMPDET_LCK	0x00000100
-+#define LP_LOCK_TAMPFLT_LCK	0x00000080
-+#define LP_LOCK_SECVIO_LCK	0x00000040
-+#define LP_LOCK_GENP_LCK	0x00000020
-+#define LP_LOCK_MONOCTR_LCK	0x00000010
-+#define LP_LOCK_CALIB_LCK	0x00000008
-+#define LP_LOCK_SRTC_LCK	0x00000004
-+#define LP_LOCK_ZMK_RD_LCK	0x00000002
-+#define LP_LOCK_ZMK_WT_LCK	0x00000001
-+
-+#define LP_CTL_CAL_VAL_SHIFT	10
-+#define LP_CTL_CAL_VAL_MASK	(0x1f << LP_CTL_CAL_VAL_SHIFT)
-+#define LP_CTL_CALIB_EN		0x00000100
-+#define LP_CTL_SRTC_INVAL_EN	0x00000010
-+#define LP_CTL_WAKE_INT_EN	0x00000008
-+#define LP_CTL_MONOCTR_EN	0x00000004
-+#define LP_CTL_TIMEALARM_EN	0x00000002
-+#define LP_CTL_SRTC_EN		0x00000001
-+
-+#define LP_MKEYCTL_ZMKECC_SHIFT	8
-+#define LP_MKEYCTL_ZMKECC_MASK	(0xff << LP_MKEYCTL_ZMKECC_SHIFT)
-+#define LP_MKEYCTL_ZMKECC_EN	0x00000010
-+#define LP_MKEYCTL_ZMKECC_VAL	0x00000008
-+#define LP_MKEYCTL_ZMKECC_PROG	0x00000004
-+#define LP_MKEYCTL_MKSEL_SHIFT	0
-+#define LP_MKEYCTL_MKSEL_MASK	(3 << LP_MKEYCTL_MKSEL_SHIFT)
-+#define LP_MKEYCTL_MK_OTP	0
-+#define LP_MKEYCTL_MK_ZMK	2
-+#define LP_MKEYCTL_MK_COMB	3
-+
-+#define LP_SECVIO_CTL_SRC5	0x20
-+#define LP_SECVIO_CTL_SRC4	0x10
-+#define LP_SECVIO_CTL_SRC3	0x08
-+#define LP_SECVIO_CTL_SRC2	0x04
-+#define LP_SECVIO_CTL_SRC1	0x02
-+#define LP_SECVIO_CTL_SRC0	0x01
-+
-+#define LP_TAMPFILT_EXT2_EN	0x80000000
-+#define LP_TAMPFILT_EXT2_SHIFT	24
-+#define LP_TAMPFILT_EXT2_MASK	(0x1f << LP_TAMPFILT_EXT2_SHIFT)
-+#define LP_TAMPFILT_EXT1_EN	0x00800000
-+#define LP_TAMPFILT_EXT1_SHIFT	16
-+#define LP_TAMPFILT_EXT1_MASK	(0x1f << LP_TAMPFILT_EXT1_SHIFT)
-+#define LP_TAMPFILT_WM_EN	0x00000080
-+#define LP_TAMPFILT_WM_SHIFT	0
-+#define LP_TAMPFILT_WM_MASK	(0x1f << LP_TAMPFILT_WM_SHIFT)
-+
-+#define LP_TAMPDET_OSC_BPS	0x10000000
-+#define LP_TAMPDET_VRC_SHIFT	24
-+#define LP_TAMPDET_VRC_MASK	(3 << LP_TAMPFILT_VRC_SHIFT)
-+#define LP_TAMPDET_HTDC_SHIFT	20
-+#define LP_TAMPDET_HTDC_MASK	(3 << LP_TAMPFILT_HTDC_SHIFT)
-+#define LP_TAMPDET_LTDC_SHIFT	16
-+#define LP_TAMPDET_LTDC_MASK	(3 << LP_TAMPFILT_LTDC_SHIFT)
-+#define LP_TAMPDET_POR_OBS	0x00008000
-+#define LP_TAMPDET_PFD_OBS	0x00004000
-+#define LP_TAMPDET_ET2_EN	0x00000400
-+#define LP_TAMPDET_ET1_EN	0x00000200
-+#define LP_TAMPDET_WMT2_EN	0x00000100
-+#define LP_TAMPDET_WMT1_EN	0x00000080
-+#define LP_TAMPDET_VT_EN	0x00000040
-+#define LP_TAMPDET_TT_EN	0x00000020
-+#define LP_TAMPDET_CT_EN	0x00000010
-+#define LP_TAMPDET_MCR_EN	0x00000004
-+#define LP_TAMPDET_SRTCR_EN	0x00000002
-+
-+#define LP_STATUS_SECURE
-+#define LP_STATUS_NONSECURE
-+#define LP_STATUS_SCANEXIT	0x00100000	/* all write 1 clear here on */
-+#define LP_STATUS_EXT_SECVIO	0x00010000
-+#define LP_STATUS_ET2		0x00000400
-+#define LP_STATUS_ET1		0x00000200
-+#define LP_STATUS_WMT2		0x00000100
-+#define LP_STATUS_WMT1		0x00000080
-+#define LP_STATUS_VTD		0x00000040
-+#define LP_STATUS_TTD		0x00000020
-+#define LP_STATUS_CTD		0x00000010
-+#define LP_STATUS_PGD		0x00000008
-+#define LP_STATUS_MCR		0x00000004
-+#define LP_STATUS_SRTCR		0x00000002
-+#define LP_STATUS_LPTA		0x00000001
-+
-+/* Full SNVS register page, including version/options */
-+struct snvs_full {
-+	struct snvs_hp hp;
-+	struct snvs_lp lp;
-+	u32 rsvd[731];		/* deadspace 0x08c-0xbf7 */
-+
-+	/* Version / Revision / Option ID space - end of register page */
-+	u32 vid;		/* 0xbf8 HP Version ID (VID 1) */
-+	u32 opt_rev;		/* 0xbfc HP Options / Revision (VID 2) */
-+};
-+
-+#endif /* SNVSREGS_H */
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0020-MLKU-25-3-crypto-caam-add-Secure-Memory-support.patch b/target/linux/layerscape/patches-5.4/804-crypto-0020-MLKU-25-3-crypto-caam-add-Secure-Memory-support.patch
deleted file mode 100644
index db0e256ded..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0020-MLKU-25-3-crypto-caam-add-Secure-Memory-support.patch
+++ /dev/null
@@ -1,2503 +0,0 @@
-From 32221046a302245a63d5e00d16cf3008b5b31255 Mon Sep 17 00:00:00 2001
-From: Steve Cornelius <steve.cornelius@freescale.com>
-Date: Tue, 23 Jul 2013 20:47:32 -0700
-Subject: [PATCH] MLKU-25-3 crypto: caam - add Secure Memory support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is a squash of the following i.MX BSP commits
-(rel_imx_4.19.35_1.1.0_rc2)
-
-1.  ae8175a3f1be ("MLK-9710-10 Add CCM defs for FIFO_STORE instruction")
-2.  9512280d066b ("MLK-9769-11 Add SM register defs, and expanded driver-private storage.")
-3.  a9dc44de8150 ("MLK-9769-10 Add Blob command bitdefs.")
-4.  8f6a17b41917 ("ENGR00289885 [iMX6Q] Add Secure Memory and SECVIO support.")
-5.  c7d4f9db1077 ("MLK-9710-11 Add internal key cover and external blob export/import to prototype SM-API")
-6.  568e449edfca ("MLK-9710-12 Adapt sm_test as a black-key handling example")
-7.  f42f12d9cb19 ("MLK-9710-13 Correct size in BLOB_OVERHEAD definition")
-8.  022fc2b33f57 ("MLK-9710-14 Un-pad cache sizes for blob export/import")
-9.  8d3e8c3c4dc1 ("MLK-9710-15 Correct size of padded key buffers")
-10. 997fb2ff88ec ("MLK-9710-5 Unregister Secure Memory platform device upon shutdown")
-11. 5316249198ee ("MLK-10897-1 ARM: imx7d: Add CAAM support for i.mx7d")
-12. 07566f42a4ec ("MLK-11103 Missing register in Secure memory configuration v1")
-13. 3004636304e1 ("MLK-12302 caam: Secure Memory platform device creation crashes")
-14. 0e6ed5a819f7 ("MLK-13779 crypto: caam - initialize kslock spinlock")
-15. b1254b6b5f52 ("Add missing NULL checks in CAAM sm")
-16. 61f57509bc9a ("MLK-17992: caam: sm: Fix compilation warnings")
-17. 41cf3d4c580c ("MLK-15473-1: crypto: caam: Add CAAM driver support for iMX8 soc family")
-18. bb8742481209 ("MLK-17253-1: crypto: caam: Fix computation of SM pages addresses")
-19. 308796dfae3b ("MLK-17253-2: crypto: caam: Use correct memory function for Secure Memory")
-20. ba2cb6b5fb10 ("MLK-17732-2: SM store: Support iMX8QX and iMX8QM")
-21. de710d376af6 ("MLK-17674-1: sm_store remove CONFIG_OF")
-22. cfcae647434e ("MLK-17674-2: CAAM SM : get base address from device tree")
-23. f49ebbd5eefa ("MLK-17992: caam: sm: Fix compilation warnings")
-24. 345ead4338b9 ("MLK-17841: crypto: caam: Correct bugs in Secure Memory")
-25. c17811f3fffc ("MLK-18082: crypto: caam: sm: Fix encap/decap function to handle errors")
-26. 41bcba1d4c9b ("MLK-18082: crypto: caam: sm: Fix descriptor running functions")
-27. b7385ab94784 ("MLK-20204: drivers: crypto: caam: sm: Remove deadcode")
-28. 1d749430cb63 ("MLK-20204: drivers: crypto: caam: sm: test: Dealloc keyslot properly")
-29. 6a5c2d9d358f ("crypto: caam - lower SM test verbosity")
-30. 1a6bc92c0c87 ("MLK-21617: crypto: caam - update SM test error handling")
-
-Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
-Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
-Signed-off-by: Steve Cornelius <steve.cornelius@nxp.com>
-Signed-off-by: Octavian Purdila <octavian.purdila@nxp.com>
-Signed-off-by: Radu Solea <radu.solea@nxp.com>
-Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
-Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com>
-Signed-off-by: Silvano di Ninno <silvano.dininno@nxp.com>
-
-that have been reworked:
-
-4.
--make SM depend on JR
--enable SM, SECVIO only on i.MX SoCs
--fix resource leak - add off_node_put() where needed
-
-Split commit in three:
-1 - SNVS/SECVIO driver
-2 - Secure Memory driver
-3 - DT changes
-
-11.
-Clock handling dropped - logic already upstream.
-
-17.
-Keep only Secure Memory related changes.
-Changes related to page 0 registers have been added previously.
-Other changes are dropped.
-
-21.
-Always use first jr in ctrlpriv->jr[] array to access registers
-in page 0 (aliased in jr page), irrespective of SCU presence.
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/Kconfig    |   30 +
- drivers/crypto/caam/Makefile   |    2 +
- drivers/crypto/caam/ctrl.c     |   37 ++
- drivers/crypto/caam/desc.h     |   21 +
- drivers/crypto/caam/intern.h   |    4 +
- drivers/crypto/caam/regs.h     |  158 ++++-
- drivers/crypto/caam/sm.h       |  127 ++++
- drivers/crypto/caam/sm_store.c | 1332 ++++++++++++++++++++++++++++++++++++++++
- drivers/crypto/caam/sm_test.c  |  571 +++++++++++++++++
- 9 files changed, 2279 insertions(+), 3 deletions(-)
- create mode 100644 drivers/crypto/caam/sm.h
- create mode 100644 drivers/crypto/caam/sm_store.c
- create mode 100644 drivers/crypto/caam/sm_test.c
-
---- a/drivers/crypto/caam/Kconfig
-+++ b/drivers/crypto/caam/Kconfig
-@@ -156,6 +156,36 @@ config CRYPTO_DEV_FSL_CAAM_RNG_TEST
- 	  caam RNG. This test is several minutes long and executes
- 	  just before the RNG is registered with the hw_random API.
- 
-+config CRYPTO_DEV_FSL_CAAM_SM
-+	tristate "CAAM Secure Memory / Keystore API (EXPERIMENTAL)"
-+	help
-+	  Enables use of a prototype kernel-level Keystore API with CAAM
-+	  Secure Memory for insertion/extraction of bus-protected secrets.
-+
-+config CRYPTO_DEV_FSL_CAAM_SM_SLOTSIZE
-+	int "Size of each keystore slot in Secure Memory"
-+	depends on CRYPTO_DEV_FSL_CAAM_SM
-+	range 5 9
-+	default 7
-+	help
-+	  Select size of allocation units to divide Secure Memory pages into
-+	  (the size of a "slot" as referenced inside the API code).
-+	  Established as powers of two.
-+	  Examples:
-+		5 => 32 bytes
-+		6 => 64 bytes
-+		7 => 128 bytes
-+		8 => 256 bytes
-+		9 => 512 bytes
-+
-+config CRYPTO_DEV_FSL_CAAM_SM_TEST
-+	tristate "CAAM Secure Memory - Keystore Test/Example (EXPERIMENTAL)"
-+	depends on CRYPTO_DEV_FSL_CAAM_SM
-+	help
-+	  Example thread to exercise the Keystore API and to verify that
-+	  stored and recovered secrets can be used for general purpose
-+	  encryption/decryption.
-+
- config CRYPTO_DEV_FSL_CAAM_SECVIO
- 	tristate "CAAM/SNVS Security Violation Handler (EXPERIMENTAL)"
- 	help
---- a/drivers/crypto/caam/Makefile
-+++ b/drivers/crypto/caam/Makefile
-@@ -21,6 +21,8 @@ caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRY
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API) += caamhash.o
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API) += caampkc.o pkc_desc.o
-+caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_SM) += sm_store.o
-+caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_SM_TEST) += sm_test.o
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_SECVIO) += secvio.o
- 
- caam-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += qi.o
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -17,6 +17,7 @@
- #include "jr.h"
- #include "desc_constr.h"
- #include "ctrl.h"
-+#include "sm.h"
- 
- bool caam_dpaa2;
- EXPORT_SYMBOL(caam_dpaa2);
-@@ -573,6 +574,7 @@ static int caam_probe(struct platform_de
- 	const struct soc_device_attribute *imx_soc_match;
- 	struct device *dev;
- 	struct device_node *nprop, *np;
-+	struct resource res_regs;
- 	struct caam_ctrl __iomem *ctrl;
- 	struct caam_drv_private *ctrlpriv;
- 	struct caam_perfmon __iomem *perfmon;
-@@ -719,9 +721,44 @@ iomap_ctrl:
- 			 BLOCK_OFFSET * DECO_BLOCK_NUMBER
- 			 );
- 
-+	/* Only i.MX SoCs have sm */
-+	if (!imx_soc_match)
-+		goto mc_fw;
-+
-+	/* Get CAAM-SM node and of_iomap() and save */
-+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-caam-sm");
-+	if (!np)
-+		return -ENODEV;
-+
-+	/* Get CAAM SM registers base address from device tree */
-+	ret = of_address_to_resource(np, 0, &res_regs);
-+	if (ret) {
-+		dev_err(dev, "failed to retrieve registers base from device tree\n");
-+		of_node_put(np);
-+		return -ENODEV;
-+	}
-+
-+	ctrlpriv->sm_phy = res_regs.start;
-+	ctrlpriv->sm_base = devm_ioremap_resource(dev, &res_regs);
-+	if (IS_ERR(ctrlpriv->sm_base)) {
-+		of_node_put(np);
-+		return PTR_ERR(ctrlpriv->sm_base);
-+	}
-+
-+	if (!of_machine_is_compatible("fsl,imx8mn") &&
-+	    !of_machine_is_compatible("fsl,imx8mm") &&
-+	    !of_machine_is_compatible("fsl,imx8mq") &&
-+	    !of_machine_is_compatible("fsl,imx8qm") &&
-+	    !of_machine_is_compatible("fsl,imx8qxp"))
-+		ctrlpriv->sm_size = resource_size(&res_regs);
-+	else
-+		ctrlpriv->sm_size = PG_SIZE_64K;
-+	of_node_put(np);
-+
- 	if (!reg_access)
- 		goto set_dma_mask;
- 
-+mc_fw:
- 	/*
- 	 * Enable DECO watchdogs and, if this is a PHYS_ADDR_T_64BIT kernel,
- 	 * long pointers in master configuration register.
---- a/drivers/crypto/caam/desc.h
-+++ b/drivers/crypto/caam/desc.h
-@@ -403,6 +403,10 @@
- #define FIFOST_TYPE_PKHA_N	 (0x08 << FIFOST_TYPE_SHIFT)
- #define FIFOST_TYPE_PKHA_A	 (0x0c << FIFOST_TYPE_SHIFT)
- #define FIFOST_TYPE_PKHA_B	 (0x0d << FIFOST_TYPE_SHIFT)
-+#define FIFOST_TYPE_AF_SBOX_CCM_JKEK	(0x10 << FIFOST_TYPE_SHIFT)
-+#define FIFOST_TYPE_AF_SBOX_CCM_TKEK	(0x11 << FIFOST_TYPE_SHIFT)
-+#define FIFOST_TYPE_KEY_CCM_JKEK	(0x14 << FIFOST_TYPE_SHIFT)
-+#define FIFOST_TYPE_KEY_CCM_TKEK	(0x15 << FIFOST_TYPE_SHIFT)
- #define FIFOST_TYPE_AF_SBOX_JKEK (0x20 << FIFOST_TYPE_SHIFT)
- #define FIFOST_TYPE_AF_SBOX_TKEK (0x21 << FIFOST_TYPE_SHIFT)
- #define FIFOST_TYPE_PKHA_E_JKEK	 (0x22 << FIFOST_TYPE_SHIFT)
-@@ -1136,6 +1140,23 @@
- #define OP_PCL_PKPROT_ECC			 0x0002
- #define OP_PCL_PKPROT_F2M			 0x0001
- 
-+/* Blob protocol protinfo bits */
-+#define OP_PCL_BLOB_TK			0x0200
-+#define OP_PCL_BLOB_EKT			0x0100
-+
-+#define OP_PCL_BLOB_K2KR_MEM		0x0000
-+#define OP_PCL_BLOB_K2KR_C1KR		0x0010
-+#define OP_PCL_BLOB_K2KR_C2KR		0x0030
-+#define OP_PCL_BLOB_K2KR_AFHAS		0x0050
-+#define OP_PCL_BLOB_K2KR_C2KR_SPLIT	0x0070
-+
-+#define OP_PCL_BLOB_PTXT_SECMEM		0x0008
-+#define OP_PCL_BLOB_BLACK		0x0004
-+
-+#define OP_PCL_BLOB_FMT_NORMAL		0x0000
-+#define OP_PCL_BLOB_FMT_MSTR		0x0002
-+#define OP_PCL_BLOB_FMT_TEST		0x0003
-+
- /* For non-protocol/alg-only op commands */
- #define OP_ALG_TYPE_SHIFT	24
- #define OP_ALG_TYPE_MASK	(0x7 << OP_ALG_TYPE_SHIFT)
---- a/drivers/crypto/caam/intern.h
-+++ b/drivers/crypto/caam/intern.h
-@@ -66,6 +66,7 @@ struct caam_drv_private_jr {
-  * Driver-private storage for a single CAAM block instance
-  */
- struct caam_drv_private {
-+	struct device *smdev;
- 
- 	/* Physical-presence section */
- 	struct caam_ctrl __iomem *ctrl; /* controller region */
-@@ -73,6 +74,9 @@ struct caam_drv_private {
- 	struct caam_assurance __iomem *assure;
- 	struct caam_queue_if __iomem *qi; /* QI control region */
- 	struct caam_job_ring __iomem *jr[4];	/* JobR's register space */
-+	dma_addr_t __iomem *sm_base;	/* Secure memory storage base */
-+	phys_addr_t sm_phy;		/* Secure memory storage physical */
-+	u32 sm_size;
- 
- 	struct iommu_domain *domain;
- 
---- a/drivers/crypto/caam/regs.h
-+++ b/drivers/crypto/caam/regs.h
-@@ -385,6 +385,12 @@ struct version_regs {
- #define CHA_VER_VID_MD_LP512	0x1ull
- #define CHA_VER_VID_MD_HP	0x2ull
- 
-+/*
-+ * caam_perfmon - Performance Monitor/Secure Memory Status/
-+ *                CAAM Global Status/Component Version IDs
-+ *
-+ * Spans f00-fff wherever instantiated
-+ */
- struct sec_vid {
- 	u16 ip_id;
- 	u8 maj_rev;
-@@ -415,17 +421,22 @@ struct caam_perfmon {
- #define CTPR_MS_PG_SZ_SHIFT	4
- 	u32 comp_parms_ms;	/* CTPR - Compile Parameters Register	*/
- 	u32 comp_parms_ls;	/* CTPR - Compile Parameters Register	*/
--	u64 rsvd1[2];
-+	/* Secure Memory State Visibility */
-+	u32 rsvd1;
-+	u32 smstatus;	/* Secure memory status */
-+	u32 rsvd2;
-+	u32 smpartown;	/* Secure memory partition owner */
- 
- 	/* CAAM Global Status					fc0-fdf */
- 	u64 faultaddr;	/* FAR  - Fault Address		*/
- 	u32 faultliodn;	/* FALR - Fault Address LIODN	*/
- 	u32 faultdetail;	/* FADR - Fault Addr Detail	*/
--	u32 rsvd2;
- #define CSTA_PLEND		BIT(10)
- #define CSTA_ALT_PLEND		BIT(18)
-+	u32 rsvd3;
- 	u32 status;		/* CSTA - CAAM Status */
--	u64 rsvd3;
-+	u32 smpart;		/* Secure Memory Partition Parameters */
-+	u32 smvid;		/* Secure Memory Version ID */
- 
- 	/* Component Instantiation Parameters			fe0-fff */
- 	u32 rtic_id;		/* RVID - RTIC Version ID	*/
-@@ -444,6 +455,62 @@ struct caam_perfmon {
- 	u32 caam_id_ls;		/* CAAMVID - CAAM Version ID LS	*/
- };
- 
-+#define SMSTATUS_PART_SHIFT	28
-+#define SMSTATUS_PART_MASK	(0xf << SMSTATUS_PART_SHIFT)
-+#define SMSTATUS_PAGE_SHIFT	16
-+#define SMSTATUS_PAGE_MASK	(0x7ff << SMSTATUS_PAGE_SHIFT)
-+#define SMSTATUS_MID_SHIFT	8
-+#define SMSTATUS_MID_MASK	(0x3f << SMSTATUS_MID_SHIFT)
-+#define SMSTATUS_ACCERR_SHIFT	4
-+#define SMSTATUS_ACCERR_MASK	(0xf << SMSTATUS_ACCERR_SHIFT)
-+#define SMSTATUS_ACCERR_NONE	0
-+#define SMSTATUS_ACCERR_ALLOC	1	/* Page not allocated */
-+#define SMSTATUS_ACCESS_ID	2	/* Not granted by ID */
-+#define SMSTATUS_ACCESS_WRITE	3	/* Writes not allowed */
-+#define SMSTATUS_ACCESS_READ	4	/* Reads not allowed */
-+#define SMSTATUS_ACCESS_NONKEY	6	/* Non-key reads not allowed */
-+#define SMSTATUS_ACCESS_BLOB	9	/* Blob access not allowed */
-+#define SMSTATUS_ACCESS_DESCB	10	/* Descriptor Blob access spans pages */
-+#define SMSTATUS_ACCESS_NON_SM	11	/* Outside Secure Memory range */
-+#define SMSTATUS_ACCESS_XPAGE	12	/* Access crosses pages */
-+#define SMSTATUS_ACCESS_INITPG	13	/* Page still initializing */
-+#define SMSTATUS_STATE_SHIFT	0
-+#define SMSTATUS_STATE_MASK	(0xf << SMSTATUS_STATE_SHIFT)
-+#define SMSTATUS_STATE_RESET	0
-+#define SMSTATUS_STATE_INIT	1
-+#define SMSTATUS_STATE_NORMAL	2
-+#define SMSTATUS_STATE_FAIL	3
-+
-+/* up to 15 rings, 2 bits shifted by ring number */
-+#define SMPARTOWN_RING_SHIFT	2
-+#define SMPARTOWN_RING_MASK	3
-+#define SMPARTOWN_AVAILABLE	0
-+#define SMPARTOWN_NOEXIST	1
-+#define SMPARTOWN_UNAVAILABLE	2
-+#define SMPARTOWN_OURS		3
-+
-+/* Maximum number of pages possible */
-+#define SMPART_MAX_NUMPG_SHIFT	16
-+#define SMPART_MAX_NUMPG_MASK	(0x3f << SMPART_MAX_NUMPG_SHIFT)
-+
-+/* Maximum partition number */
-+#define SMPART_MAX_PNUM_SHIFT	12
-+#define SMPART_MAX_PNUM_MASK	(0xf << SMPART_MAX_PNUM_SHIFT)
-+
-+/* Highest possible page number */
-+#define SMPART_MAX_PG_SHIFT	0
-+#define SMPART_MAX_PG_MASK	(0x3f << SMPART_MAX_PG_SHIFT)
-+
-+/* Max size of a page */
-+#define SMVID_PG_SIZE_SHIFT	16
-+#define SMVID_PG_SIZE_MASK	(0x7 << SMVID_PG_SIZE_SHIFT)
-+
-+/* Major/Minor Version ID */
-+#define SMVID_MAJ_VERS_SHIFT	8
-+#define SMVID_MAJ_VERS		(0xf << SMVID_MAJ_VERS_SHIFT)
-+#define SMVID_MIN_VERS_SHIFT	0
-+#define SMVID_MIN_VERS		(0xf << SMVID_MIN_VERS_SHIFT)
-+
- /* LIODN programming for DMA configuration */
- #define MSTRID_LOCK_LIODN	0x80000000
- #define MSTRID_LOCK_MAKETRUSTED	0x00010000	/* only for JR masterid */
-@@ -648,6 +715,35 @@ struct caam_ctrl {
- #define JRSTART_JR2_START       0x00000004 /* Start Job ring 2 */
- #define JRSTART_JR3_START       0x00000008 /* Start Job ring 3 */
- 
-+/* Secure Memory Configuration - if you have it */
-+/* Secure Memory Register Offset from JR Base Reg*/
-+#define SM_V1_OFFSET 0x0f4
-+#define SM_V2_OFFSET 0xa00
-+
-+/* Minimum SM Version ID requiring v2 SM register mapping */
-+#define SMVID_V2 0x20105
-+
-+struct caam_secure_mem_v1 {
-+	u32 sm_cmd;	/* SMCJRx - Secure memory command */
-+	u32 rsvd1;
-+	u32 sm_status;	/* SMCSJRx - Secure memory status */
-+	u32 rsvd2;
-+
-+	u32 sm_perm;	/* SMAPJRx - Secure memory access perms */
-+	u32 sm_group2;	/* SMAP2JRx - Secure memory access group 2 */
-+	u32 sm_group1;	/* SMAP1JRx - Secure memory access group 1 */
-+};
-+
-+struct caam_secure_mem_v2 {
-+	u32 sm_perm;	/* SMAPJRx - Secure memory access perms */
-+	u32 sm_group2;	/* SMAP2JRx - Secure memory access group 2 */
-+	u32 sm_group1;	/* SMAP1JRx - Secure memory access group 1 */
-+	u32 rsvd1[118];
-+	u32 sm_cmd;	/* SMCJRx - Secure memory command */
-+	u32 rsvd2;
-+	u32 sm_status;	/* SMCSJRx - Secure memory status */
-+};
-+
- /*
-  * caam_job_ring - direct job ring setup
-  * 1-4 possible per instantiation, base + 1000/2000/3000/4000
-@@ -818,6 +914,62 @@ struct caam_job_ring {
- 
- #define JRCR_RESET                  0x01
- 
-+/* secure memory command */
-+#define SMC_PAGE_SHIFT	16
-+#define SMC_PAGE_MASK	(0xffff << SMC_PAGE_SHIFT)
-+#define SMC_PART_SHIFT	8
-+#define SMC_PART_MASK	(0x0f << SMC_PART_SHIFT)
-+#define SMC_CMD_SHIFT	0
-+#define SMC_CMD_MASK	(0x0f << SMC_CMD_SHIFT)
-+
-+#define SMC_CMD_ALLOC_PAGE	0x01	/* allocate page to this partition */
-+#define SMC_CMD_DEALLOC_PAGE	0x02	/* deallocate page from partition */
-+#define SMC_CMD_DEALLOC_PART	0x03	/* deallocate partition */
-+#define SMC_CMD_PAGE_INQUIRY	0x05	/* find partition associate with page */
-+
-+/* secure memory (command) status */
-+#define SMCS_PAGE_SHIFT		16
-+#define SMCS_PAGE_MASK		(0x0fff << SMCS_PAGE_SHIFT)
-+#define SMCS_CMDERR_SHIFT	14
-+#define SMCS_CMDERR_MASK	(3 << SMCS_CMDERR_SHIFT)
-+#define SMCS_ALCERR_SHIFT	12
-+#define SMCS_ALCERR_MASK	(3 << SMCS_ALCERR_SHIFT)
-+#define SMCS_PGOWN_SHIFT	6
-+#define SMCS_PGWON_MASK		(3 << SMCS_PGOWN_SHIFT)
-+#define SMCS_PART_SHIFT		0
-+#define SMCS_PART_MASK		(0xf << SMCS_PART_SHIFT)
-+
-+#define SMCS_CMDERR_NONE	0
-+#define SMCS_CMDERR_INCOMP	1	/* Command not yet complete */
-+#define SMCS_CMDERR_SECFAIL	2	/* Security failure occurred */
-+#define SMCS_CMDERR_OVERFLOW	3	/* Command overflow */
-+
-+#define SMCS_ALCERR_NONE	0
-+#define SMCS_ALCERR_PSPERR	1	/* Partion marked PSP (dealloc only) */
-+#define SMCS_ALCERR_PAGEAVAIL	2	/* Page not available */
-+#define SMCS_ALCERR_PARTOWN	3	/* Partition ownership error */
-+
-+#define SMCS_PGOWN_AVAIL	0	/* Page is available */
-+#define SMCS_PGOWN_NOEXIST	1	/* Page initializing or nonexistent */
-+#define SMCS_PGOWN_NOOWN	2	/* Page owned by another processor */
-+#define SMCS_PGOWN_OWNED	3	/* Page belongs to this processor */
-+
-+/* secure memory access permissions */
-+#define SMCS_PERM_KEYMOD_SHIFT	16
-+#define SMCA_PERM_KEYMOD_MASK	(0xff << SMCS_PERM_KEYMOD_SHIFT)
-+#define SMCA_PERM_CSP_ZERO	0x8000	/* Zero when deallocated or released */
-+#define SMCA_PERM_PSP_LOCK	0x4000	/* Part./pages can't be deallocated */
-+#define SMCA_PERM_PERM_LOCK	0x2000	/* Lock permissions */
-+#define SMCA_PERM_GRP_LOCK	0x1000	/* Lock access groups */
-+#define SMCA_PERM_RINGID_SHIFT	10
-+#define SMCA_PERM_RINGID_MASK	(3 << SMCA_PERM_RINGID_SHIFT)
-+#define SMCA_PERM_G2_BLOB	0x0080	/* Group 2 blob import/export */
-+#define SMCA_PERM_G2_WRITE	0x0020	/* Group 2 write */
-+#define SMCA_PERM_G2_READ	0x0010	/* Group 2 read */
-+#define SMCA_PERM_G1_BLOB	0x0008	/* Group 1... */
-+#define SMCA_PERM_G1_WRITE	0x0002
-+#define SMCA_PERM_G1_READ	0x0001
-+
- /*
-  * caam_assurance - Assurance Controller View
-  * base + 0x6000 padded out to 0x1000
---- /dev/null
-+++ b/drivers/crypto/caam/sm.h
-@@ -0,0 +1,127 @@
-+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-+/*
-+ * CAAM Secure Memory/Keywrap API Definitions
-+ *
-+ * Copyright 2008-2015 Freescale Semiconductor, Inc.
-+ * Copyright 2016-2019 NXP
-+ */
-+
-+#ifndef SM_H
-+#define SM_H
-+
-+
-+/* Storage access permissions */
-+#define SM_PERM_READ 0x01
-+#define SM_PERM_WRITE 0x02
-+#define SM_PERM_BLOB 0x03
-+
-+/* Define treatment of secure memory vs. general memory blobs */
-+#define SM_SECMEM 0
-+#define SM_GENMEM 1
-+
-+/* Define treatment of red/black keys */
-+#define RED_KEY 0
-+#define BLACK_KEY 1
-+
-+/* Define key encryption/covering options */
-+#define KEY_COVER_ECB 0	/* cover key in AES-ECB */
-+#define KEY_COVER_CCM 1 /* cover key with AES-CCM */
-+
-+/*
-+ * Round a key size up to an AES blocksize boundary so to allow for
-+ * padding out to a full block
-+ */
-+#define AES_BLOCK_PAD(x) ((x % 16) ? ((x >> 4) + 1) << 4 : x)
-+
-+/* Define space required for BKEK + MAC tag storage in any blob */
-+#define BLOB_OVERHEAD (32 + 16)
-+
-+/* Keystore maintenance functions */
-+void sm_init_keystore(struct device *dev);
-+u32 sm_detect_keystore_units(struct device *dev);
-+int sm_establish_keystore(struct device *dev, u32 unit);
-+void sm_release_keystore(struct device *dev, u32 unit);
-+void caam_sm_shutdown(struct platform_device *pdev);
-+int caam_sm_example_init(struct platform_device *pdev);
-+
-+/* Keystore accessor functions */
-+extern int sm_keystore_slot_alloc(struct device *dev, u32 unit, u32 size,
-+				  u32 *slot);
-+extern int sm_keystore_slot_dealloc(struct device *dev, u32 unit, u32 slot);
-+extern int sm_keystore_slot_load(struct device *dev, u32 unit, u32 slot,
-+				 const u8 *key_data, u32 key_length);
-+extern int sm_keystore_slot_read(struct device *dev, u32 unit, u32 slot,
-+				 u32 key_length, u8 *key_data);
-+extern int sm_keystore_cover_key(struct device *dev, u32 unit, u32 slot,
-+				 u16 key_length, u8 keyauth);
-+extern int sm_keystore_slot_export(struct device *dev, u32 unit, u32 slot,
-+				   u8 keycolor, u8 keyauth, u8 *outbuf,
-+				   u16 keylen, u8 *keymod);
-+extern int sm_keystore_slot_import(struct device *dev, u32 unit, u32 slot,
-+				   u8 keycolor, u8 keyauth, u8 *inbuf,
-+				   u16 keylen, u8 *keymod);
-+
-+/* Prior functions from legacy API, deprecated */
-+extern int sm_keystore_slot_encapsulate(struct device *dev, u32 unit,
-+					u32 inslot, u32 outslot, u16 secretlen,
-+					u8 *keymod, u16 keymodlen);
-+extern int sm_keystore_slot_decapsulate(struct device *dev, u32 unit,
-+					u32 inslot, u32 outslot, u16 secretlen,
-+					u8 *keymod, u16 keymodlen);
-+
-+/* Data structure to hold per-slot information */
-+struct keystore_data_slot_info {
-+	u8	allocated;	/* Track slot assignments */
-+	u32	key_length;	/* Size of the key */
-+};
-+
-+/* Data structure to hold keystore information */
-+struct keystore_data {
-+	void	*base_address;	/* Virtual base of secure memory pages */
-+	void	*phys_address;	/* Physical base of secure memory pages */
-+	u32	slot_count;	/* Number of slots in the keystore */
-+	struct keystore_data_slot_info *slot; /* Per-slot information */
-+};
-+
-+/* store the detected attributes of a secure memory page */
-+struct sm_page_descriptor {
-+	u16 phys_pagenum;	/* may be discontiguous */
-+	u16 own_part;		/* Owning partition */
-+	void *pg_base;		/* Calculated virtual address */
-+	void *pg_phys;		/* Calculated physical address */
-+	struct keystore_data *ksdata;
-+};
-+
-+struct caam_drv_private_sm {
-+	struct device *parentdev;	/* this ends up as the controller */
-+	struct device *smringdev;	/* ring that owns this instance */
-+	struct platform_device *sm_pdev;  /* Secure Memory platform device */
-+	spinlock_t kslock ____cacheline_aligned;
-+
-+	/* SM Register offset from JR base address */
-+	u32 sm_reg_offset;
-+
-+	/* Default parameters for geometry */
-+	u32 max_pages;		/* maximum pages this instance can support */
-+	u32 top_partition;	/* highest partition number in this instance */
-+	u32 top_page;		/* highest page number in this instance */
-+	u32 page_size;		/* page size */
-+	u32 slot_size;		/* selected size of each storage block */
-+
-+	/* Partition/Page Allocation Map */
-+	u32 localpages;		/* Number of pages we can access */
-+	struct sm_page_descriptor *pagedesc;	/* Allocated per-page */
-+
-+	/* Installed handlers for keystore access */
-+	int (*data_init)(struct device *dev, u32 unit);
-+	void (*data_cleanup)(struct device *dev, u32 unit);
-+	int (*slot_alloc)(struct device *dev, u32 unit, u32 size, u32 *slot);
-+	int (*slot_dealloc)(struct device *dev, u32 unit, u32 slot);
-+	void *(*slot_get_address)(struct device *dev, u32 unit, u32 handle);
-+	void *(*slot_get_physical)(struct device *dev, u32 unit, u32 handle);
-+	u32 (*slot_get_base)(struct device *dev, u32 unit, u32 handle);
-+	u32 (*slot_get_offset)(struct device *dev, u32 unit, u32 handle);
-+	u32 (*slot_get_slot_size)(struct device *dev, u32 unit, u32 handle);
-+};
-+
-+#endif /* SM_H */
---- /dev/null
-+++ b/drivers/crypto/caam/sm_store.c
-@@ -0,0 +1,1332 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-+/*
-+ * CAAM Secure Memory Storage Interface
-+ *
-+ * Copyright 2008-2015 Freescale Semiconductor, Inc.
-+ * Copyright 2016-2019 NXP
-+ *
-+ * Loosely based on the SHW Keystore API for SCC/SCC2
-+ * Experimental implementation and NOT intended for upstream use. Expect
-+ * this interface to be amended significantly in the future once it becomes
-+ * integrated into live applications.
-+ *
-+ * Known issues:
-+ *
-+ * - Executes one instance of an secure memory "driver". This is tied to the
-+ *   fact that job rings can't run as standalone instances in the present
-+ *   configuration.
-+ *
-+ * - It does not expose a userspace interface. The value of a userspace
-+ *   interface for access to secrets is a point for further architectural
-+ *   discussion.
-+ *
-+ * - Partition/permission management is not part of this interface. It
-+ *   depends on some level of "knowledge" agreed upon between bootloader,
-+ *   provisioning applications, and OS-hosted software (which uses this
-+ *   driver).
-+ *
-+ * - No means of identifying the location or purpose of secrets managed by
-+ *   this interface exists; "slot location" and format of a given secret
-+ *   needs to be agreed upon between bootloader, provisioner, and OS-hosted
-+ *   application.
-+ */
-+
-+#include "compat.h"
-+#include "regs.h"
-+#include "jr.h"
-+#include "desc.h"
-+#include "intern.h"
-+#include "error.h"
-+#include "sm.h"
-+#include <linux/of_address.h>
-+
-+#define SECMEM_KEYMOD_LEN 8
-+#define GENMEM_KEYMOD_LEN 16
-+
-+#ifdef SM_DEBUG_CONT
-+void sm_show_page(struct device *dev, struct sm_page_descriptor *pgdesc)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	u32 i, *smdata;
-+
-+	dev_info(dev, "physical page %d content at 0x%08x\n",
-+		 pgdesc->phys_pagenum, pgdesc->pg_base);
-+	smdata = pgdesc->pg_base;
-+	for (i = 0; i < (smpriv->page_size / sizeof(u32)); i += 4)
-+		dev_info(dev, "[0x%08x] 0x%08x 0x%08x 0x%08x 0x%08x\n",
-+			 (u32)&smdata[i], smdata[i], smdata[i+1], smdata[i+2],
-+			 smdata[i+3]);
-+}
-+#endif
-+
-+#define INITIAL_DESCSZ 16	/* size of tmp buffer for descriptor const. */
-+
-+static __always_inline u32 sm_send_cmd(struct caam_drv_private_sm *smpriv,
-+					     struct caam_drv_private_jr *jrpriv,
-+					     u32 cmd, u32 *status)
-+{
-+	void __iomem *write_address;
-+	void __iomem *read_address;
-+
-+	if (smpriv->sm_reg_offset == SM_V1_OFFSET) {
-+		struct caam_secure_mem_v1 *sm_regs_v1;
-+
-+		sm_regs_v1 = (struct caam_secure_mem_v1 *)
-+			((void *)jrpriv->rregs + SM_V1_OFFSET);
-+		write_address = &sm_regs_v1->sm_cmd;
-+		read_address = &sm_regs_v1->sm_status;
-+
-+	} else if (smpriv->sm_reg_offset == SM_V2_OFFSET) {
-+		struct caam_secure_mem_v2 *sm_regs_v2;
-+
-+		sm_regs_v2 = (struct caam_secure_mem_v2 *)
-+			((void *)jrpriv->rregs + SM_V2_OFFSET);
-+		write_address = &sm_regs_v2->sm_cmd;
-+		read_address = &sm_regs_v2->sm_status;
-+
-+	} else {
-+		return -EINVAL;
-+	}
-+
-+	wr_reg32(write_address, cmd);
-+
-+	udelay(10);
-+
-+	/* Read until the command has terminated and the status is correct */
-+	do {
-+		*status = rd_reg32(read_address);
-+	} while (((*status & SMCS_CMDERR_MASK) >>  SMCS_CMDERR_SHIFT)
-+				   == SMCS_CMDERR_INCOMP);
-+
-+	return 0;
-+}
-+
-+/*
-+ * Construct a black key conversion job descriptor
-+ *
-+ * This function constructs a job descriptor capable of performing
-+ * a key blackening operation on a plaintext secure memory resident object.
-+ *
-+ * - desc	pointer to a pointer to the descriptor generated by this
-+ *		function. Caller will be responsible to kfree() this
-+ *		descriptor after execution.
-+ * - key	physical pointer to the plaintext, which will also hold
-+ *		the result. Since encryption occurs in place, caller must
-+ *              ensure that the space is large enough to accommodate the
-+ *              blackened key
-+ * - keysz	size of the plaintext
-+ * - auth	if a CCM-covered key is required, use KEY_COVER_CCM, else
-+ *		use KEY_COVER_ECB.
-+ *
-+ * KEY to key1 from @key_addr LENGTH 16 BYTES;
-+ * FIFO STORE from key1[ecb] TO @key_addr LENGTH 16 BYTES;
-+ *
-+ * Note that this variant uses the JDKEK only; it does not accommodate the
-+ * trusted key encryption key at this time.
-+ *
-+ */
-+static int blacken_key_jobdesc(u32 **desc, void *key, u16 keysz, bool auth)
-+{
-+	u32 *tdesc, tmpdesc[INITIAL_DESCSZ];
-+	u16 dsize, idx;
-+
-+	memset(tmpdesc, 0, INITIAL_DESCSZ * sizeof(u32));
-+	idx = 1;
-+
-+	/* Load key to class 1 key register */
-+	tmpdesc[idx++] = CMD_KEY | CLASS_1 | (keysz & KEY_LENGTH_MASK);
-+	tmpdesc[idx++] = (uintptr_t)key;
-+
-+	/* ...and write back out via FIFO store*/
-+	tmpdesc[idx] = CMD_FIFO_STORE | CLASS_1 | (keysz & KEY_LENGTH_MASK);
-+
-+	/* plus account for ECB/CCM option in FIFO_STORE */
-+	if (auth == KEY_COVER_ECB)
-+		tmpdesc[idx] |= FIFOST_TYPE_KEY_KEK;
-+	else
-+		tmpdesc[idx] |= FIFOST_TYPE_KEY_CCM_JKEK;
-+
-+	idx++;
-+	tmpdesc[idx++] = (uintptr_t)key;
-+
-+	/* finish off the job header */
-+	tmpdesc[0] = CMD_DESC_HDR | HDR_ONE | (idx & HDR_DESCLEN_MASK);
-+	dsize = idx * sizeof(u32);
-+
-+	/* now allocate execution buffer and coat it with executable */
-+	tdesc = kmalloc(dsize, GFP_KERNEL | GFP_DMA);
-+	if (tdesc == NULL)
-+		return 0;
-+
-+	memcpy(tdesc, tmpdesc, dsize);
-+	*desc = tdesc;
-+
-+	return dsize;
-+}
-+
-+/*
-+ * Construct a blob encapsulation job descriptor
-+ *
-+ * This function dynamically constructs a blob encapsulation job descriptor
-+ * from the following arguments:
-+ *
-+ * - desc	pointer to a pointer to the descriptor generated by this
-+ *		function. Caller will be responsible to kfree() this
-+ *		descriptor after execution.
-+ * - keymod	Physical pointer to a key modifier, which must reside in a
-+ *		contiguous piece of memory. Modifier will be assumed to be
-+ *		8 bytes long for a blob of type SM_SECMEM, or 16 bytes long
-+ *		for a blob of type SM_GENMEM (see blobtype argument).
-+ * - secretbuf	Physical pointer to a secret, normally a black or red key,
-+ *		possibly residing within an accessible secure memory page,
-+ *		of the secret to be encapsulated to an output blob.
-+ * - outbuf	Physical pointer to the destination buffer to receive the
-+ *		encapsulated output. This buffer will need to be 48 bytes
-+ *		larger than the input because of the added encapsulation data.
-+ *		The generated descriptor will account for the increase in size,
-+ *		but the caller must also account for this increase in the
-+ *		buffer allocator.
-+ * - secretsz	Size of input secret, in bytes. This is limited to 65536
-+ *		less the size of blob overhead, since the length embeds into
-+ *		DECO pointer in/out instructions.
-+ * - keycolor   Determines if the source data is covered (black key) or
-+ *		plaintext (red key). RED_KEY or BLACK_KEY are defined in
-+ *		for this purpose.
-+ * - blobtype	Determine if encapsulated blob should be a secure memory
-+ *		blob (SM_SECMEM), with partition data embedded with key
-+ *		material, or a general memory blob (SM_GENMEM).
-+ * - auth	If BLACK_KEY source is covered via AES-CCM, specify
-+ *		KEY_COVER_CCM, else uses AES-ECB (KEY_COVER_ECB).
-+ *
-+ * Upon completion, desc points to a buffer containing a CAAM job
-+ * descriptor which encapsulates data into an externally-storable blob
-+ * suitable for use across power cycles.
-+ *
-+ * This is an example of a black key encapsulation job into a general memory
-+ * blob. Notice the 16-byte key modifier in the LOAD instruction. Also note
-+ * the output 48 bytes longer than the input:
-+ *
-+ * [00] B0800008       jobhdr: stidx=0 len=8
-+ * [01] 14400010           ld: ccb2-key len=16 offs=0
-+ * [02] 08144891               ptr->@0x08144891
-+ * [03] F800003A    seqoutptr: len=58
-+ * [04] 01000000               out_ptr->@0x01000000
-+ * [05] F000000A     seqinptr: len=10
-+ * [06] 09745090               in_ptr->@0x09745090
-+ * [07] 870D0004    operation: encap blob  reg=memory, black, format=normal
-+ *
-+ * This is an example of a red key encapsulation job for storing a red key
-+ * into a secure memory blob. Note the 8 byte modifier on the 12 byte offset
-+ * in the LOAD instruction; this accounts for blob permission storage:
-+ *
-+ * [00] B0800008       jobhdr: stidx=0 len=8
-+ * [01] 14400C08           ld: ccb2-key len=8 offs=12
-+ * [02] 087D0784               ptr->@0x087d0784
-+ * [03] F8000050    seqoutptr: len=80
-+ * [04] 09251BB2               out_ptr->@0x09251bb2
-+ * [05] F0000020     seqinptr: len=32
-+ * [06] 40000F31               in_ptr->@0x40000f31
-+ * [07] 870D0008    operation: encap blob  reg=memory, red, sec_mem,
-+ *                             format=normal
-+ *
-+ * Note: this function only generates 32-bit pointers at present, and should
-+ * be refactored using a scheme that allows both 32 and 64 bit addressing
-+ */
-+
-+static int blob_encap_jobdesc(u32 **desc, dma_addr_t keymod,
-+			      void *secretbuf, dma_addr_t outbuf,
-+			      u16 secretsz, u8 keycolor, u8 blobtype, u8 auth)
-+{
-+	u32 *tdesc, tmpdesc[INITIAL_DESCSZ];
-+	u16 dsize, idx;
-+
-+	memset(tmpdesc, 0, INITIAL_DESCSZ * sizeof(u32));
-+	idx = 1;
-+
-+	/*
-+	 * Key modifier works differently for secure/general memory blobs
-+	 * This accounts for the permission/protection data encapsulated
-+	 * within the blob if a secure memory blob is requested
-+	 */
-+	if (blobtype == SM_SECMEM)
-+		tmpdesc[idx++] = CMD_LOAD | LDST_CLASS_2_CCB |
-+				 LDST_SRCDST_BYTE_KEY |
-+				 ((12 << LDST_OFFSET_SHIFT) & LDST_OFFSET_MASK)
-+				 | (8 & LDST_LEN_MASK);
-+	else /* is general memory blob */
-+		tmpdesc[idx++] = CMD_LOAD | LDST_CLASS_2_CCB |
-+				 LDST_SRCDST_BYTE_KEY | (16 & LDST_LEN_MASK);
-+
-+	tmpdesc[idx++] = (u32)keymod;
-+
-+	/*
-+	 * Encapsulation output must include space for blob key encryption
-+	 * key and MAC tag
-+	 */
-+	tmpdesc[idx++] = CMD_SEQ_OUT_PTR | (secretsz + BLOB_OVERHEAD);
-+	tmpdesc[idx++] = (u32)outbuf;
-+
-+	/* Input data, should be somewhere in secure memory */
-+	tmpdesc[idx++] = CMD_SEQ_IN_PTR | secretsz;
-+	tmpdesc[idx++] = (uintptr_t)secretbuf;
-+
-+	/* Set blob encap, then color */
-+	tmpdesc[idx] = CMD_OPERATION | OP_TYPE_ENCAP_PROTOCOL | OP_PCLID_BLOB;
-+
-+	if (blobtype == SM_SECMEM)
-+		tmpdesc[idx] |= OP_PCL_BLOB_PTXT_SECMEM;
-+
-+	if (auth == KEY_COVER_CCM)
-+		tmpdesc[idx] |= OP_PCL_BLOB_EKT;
-+
-+	if (keycolor == BLACK_KEY)
-+		tmpdesc[idx] |= OP_PCL_BLOB_BLACK;
-+
-+	idx++;
-+	tmpdesc[0] = CMD_DESC_HDR | HDR_ONE | (idx & HDR_DESCLEN_MASK);
-+	dsize = idx * sizeof(u32);
-+
-+	tdesc = kmalloc(dsize, GFP_KERNEL | GFP_DMA);
-+	if (tdesc == NULL)
-+		return 0;
-+
-+	memcpy(tdesc, tmpdesc, dsize);
-+	*desc = tdesc;
-+	return dsize;
-+}
-+
-+/*
-+ * Construct a blob decapsulation job descriptor
-+ *
-+ * This function dynamically constructs a blob decapsulation job descriptor
-+ * from the following arguments:
-+ *
-+ * - desc	pointer to a pointer to the descriptor generated by this
-+ *		function. Caller will be responsible to kfree() this
-+ *		descriptor after execution.
-+ * - keymod	Physical pointer to a key modifier, which must reside in a
-+ *		contiguous piece of memory. Modifier will be assumed to be
-+ *		8 bytes long for a blob of type SM_SECMEM, or 16 bytes long
-+ *		for a blob of type SM_GENMEM (see blobtype argument).
-+ * - blobbuf	Physical pointer (into external memory) of the blob to
-+ *		be decapsulated. Blob must reside in a contiguous memory
-+ *		segment.
-+ * - outbuf	Physical pointer of the decapsulated output, possibly into
-+ *		a location within a secure memory page. Must be contiguous.
-+ * - secretsz	Size of encapsulated secret in bytes (not the size of the
-+ *		input blob).
-+ * - keycolor   Determines if decapsulated content is encrypted (BLACK_KEY)
-+ *		or left as plaintext (RED_KEY).
-+ * - blobtype	Determine if encapsulated blob should be a secure memory
-+ *		blob (SM_SECMEM), with partition data embedded with key
-+ *		material, or a general memory blob (SM_GENMEM).
-+ * - auth	If decapsulation path is specified by BLACK_KEY, then if
-+ *		AES-CCM is requested for key covering use KEY_COVER_CCM, else
-+ *		use AES-ECB (KEY_COVER_ECB).
-+ *
-+ * Upon completion, desc points to a buffer containing a CAAM job descriptor
-+ * that decapsulates a key blob from external memory into a black (encrypted)
-+ * key or red (plaintext) content.
-+ *
-+ * This is an example of a black key decapsulation job from a general memory
-+ * blob. Notice the 16-byte key modifier in the LOAD instruction.
-+ *
-+ * [00] B0800008       jobhdr: stidx=0 len=8
-+ * [01] 14400010           ld: ccb2-key len=16 offs=0
-+ * [02] 08A63B7F               ptr->@0x08a63b7f
-+ * [03] F8000010    seqoutptr: len=16
-+ * [04] 01000000               out_ptr->@0x01000000
-+ * [05] F000003A     seqinptr: len=58
-+ * [06] 01000010               in_ptr->@0x01000010
-+ * [07] 860D0004    operation: decap blob  reg=memory, black, format=normal
-+ *
-+ * This is an example of a red key decapsulation job for restoring a red key
-+ * from a secure memory blob. Note the 8 byte modifier on the 12 byte offset
-+ * in the LOAD instruction:
-+ *
-+ * [00] B0800008       jobhdr: stidx=0 len=8
-+ * [01] 14400C08           ld: ccb2-key len=8 offs=12
-+ * [02] 01000000               ptr->@0x01000000
-+ * [03] F8000020    seqoutptr: len=32
-+ * [04] 400000E6               out_ptr->@0x400000e6
-+ * [05] F0000050     seqinptr: len=80
-+ * [06] 08F0C0EA               in_ptr->@0x08f0c0ea
-+ * [07] 860D0008    operation: decap blob  reg=memory, red, sec_mem,
-+ *			       format=normal
-+ *
-+ * Note: this function only generates 32-bit pointers at present, and should
-+ * be refactored using a scheme that allows both 32 and 64 bit addressing
-+ */
-+
-+static int blob_decap_jobdesc(u32 **desc, dma_addr_t keymod, dma_addr_t blobbuf,
-+			      u8 *outbuf, u16 secretsz, u8 keycolor,
-+			      u8 blobtype, u8 auth)
-+{
-+	u32 *tdesc, tmpdesc[INITIAL_DESCSZ];
-+	u16 dsize, idx;
-+
-+	memset(tmpdesc, 0, INITIAL_DESCSZ * sizeof(u32));
-+	idx = 1;
-+
-+	/* Load key modifier */
-+	if (blobtype == SM_SECMEM)
-+		tmpdesc[idx++] = CMD_LOAD | LDST_CLASS_2_CCB |
-+				 LDST_SRCDST_BYTE_KEY |
-+				 ((12 << LDST_OFFSET_SHIFT) & LDST_OFFSET_MASK)
-+				 | (8 & LDST_LEN_MASK);
-+	else /* is general memory blob */
-+		tmpdesc[idx++] = CMD_LOAD | LDST_CLASS_2_CCB |
-+				 LDST_SRCDST_BYTE_KEY | (16 & LDST_LEN_MASK);
-+
-+	tmpdesc[idx++] = (u32)keymod;
-+
-+	/* Compensate BKEK + MAC tag over size of encapsulated secret */
-+	tmpdesc[idx++] = CMD_SEQ_IN_PTR | (secretsz + BLOB_OVERHEAD);
-+	tmpdesc[idx++] = (u32)blobbuf;
-+	tmpdesc[idx++] = CMD_SEQ_OUT_PTR | secretsz;
-+	tmpdesc[idx++] = (uintptr_t)outbuf;
-+
-+	/* Decapsulate from secure memory partition to black blob */
-+	tmpdesc[idx] = CMD_OPERATION | OP_TYPE_DECAP_PROTOCOL | OP_PCLID_BLOB;
-+
-+	if (blobtype == SM_SECMEM)
-+		tmpdesc[idx] |= OP_PCL_BLOB_PTXT_SECMEM;
-+
-+	if (auth == KEY_COVER_CCM)
-+		tmpdesc[idx] |= OP_PCL_BLOB_EKT;
-+
-+	if (keycolor == BLACK_KEY)
-+		tmpdesc[idx] |= OP_PCL_BLOB_BLACK;
-+
-+	idx++;
-+	tmpdesc[0] = CMD_DESC_HDR | HDR_ONE | (idx & HDR_DESCLEN_MASK);
-+	dsize = idx * sizeof(u32);
-+
-+	tdesc = kmalloc(dsize, GFP_KERNEL | GFP_DMA);
-+	if (tdesc == NULL)
-+		return 0;
-+
-+	memcpy(tdesc, tmpdesc, dsize);
-+	*desc = tdesc;
-+	return dsize;
-+}
-+
-+/*
-+ * Pseudo-synchronous ring access functions for carrying out key
-+ * encapsulation and decapsulation
-+ */
-+
-+struct sm_key_job_result {
-+	int error;
-+	struct completion completion;
-+};
-+
-+void sm_key_job_done(struct device *dev, u32 *desc, u32 err, void *context)
-+{
-+	struct sm_key_job_result *res = context;
-+
-+	if (err)
-+		caam_jr_strstatus(dev, err);
-+
-+	res->error = err;	/* save off the error for postprocessing */
-+
-+	complete(&res->completion);	/* mark us complete */
-+}
-+
-+static int sm_key_job(struct device *ksdev, u32 *jobdesc)
-+{
-+	struct sm_key_job_result testres = {0};
-+	struct caam_drv_private_sm *kspriv;
-+	int rtn = 0;
-+
-+	kspriv = dev_get_drvdata(ksdev);
-+
-+	init_completion(&testres.completion);
-+
-+	rtn = caam_jr_enqueue(kspriv->smringdev, jobdesc, sm_key_job_done,
-+			      &testres);
-+	if (rtn)
-+		goto exit;
-+
-+	wait_for_completion_interruptible(&testres.completion);
-+	rtn = testres.error;
-+
-+exit:
-+	return rtn;
-+}
-+
-+/*
-+ * Following section establishes the default methods for keystore access
-+ * They are NOT intended for use external to this module
-+ *
-+ * In the present version, these are the only means for the higher-level
-+ * interface to deal with the mechanics of accessing the phyiscal keystore
-+ */
-+
-+
-+int slot_alloc(struct device *dev, u32 unit, u32 size, u32 *slot)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	struct keystore_data *ksdata = smpriv->pagedesc[unit].ksdata;
-+	u32 i;
-+#ifdef SM_DEBUG
-+	dev_info(dev, "slot_alloc(): requesting slot for %d bytes\n", size);
-+#endif
-+
-+	if (size > smpriv->slot_size)
-+		return -EKEYREJECTED;
-+
-+	for (i = 0; i < ksdata->slot_count; i++) {
-+		if (ksdata->slot[i].allocated == 0) {
-+			ksdata->slot[i].allocated = 1;
-+			(*slot) = i;
-+#ifdef SM_DEBUG
-+			dev_info(dev, "slot_alloc(): new slot %d allocated\n",
-+				 *slot);
-+#endif
-+			return 0;
-+		}
-+	}
-+
-+	return -ENOSPC;
-+}
-+EXPORT_SYMBOL(slot_alloc);
-+
-+int slot_dealloc(struct device *dev, u32 unit, u32 slot)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	struct keystore_data *ksdata = smpriv->pagedesc[unit].ksdata;
-+	u8 __iomem *slotdata;
-+
-+#ifdef SM_DEBUG
-+	dev_info(dev, "slot_dealloc(): releasing slot %d\n", slot);
-+#endif
-+	if (slot >= ksdata->slot_count)
-+		return -EINVAL;
-+	slotdata = ksdata->base_address + slot * smpriv->slot_size;
-+
-+	if (ksdata->slot[slot].allocated == 1) {
-+		/* Forcibly overwrite the data from the keystore */
-+		memset_io(ksdata->base_address + slot * smpriv->slot_size, 0,
-+		       smpriv->slot_size);
-+
-+		ksdata->slot[slot].allocated = 0;
-+#ifdef SM_DEBUG
-+		dev_info(dev, "slot_dealloc(): slot %d released\n", slot);
-+#endif
-+		return 0;
-+	}
-+
-+	return -EINVAL;
-+}
-+EXPORT_SYMBOL(slot_dealloc);
-+
-+void *slot_get_address(struct device *dev, u32 unit, u32 slot)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	struct keystore_data *ksdata = smpriv->pagedesc[unit].ksdata;
-+
-+	if (slot >= ksdata->slot_count)
-+		return NULL;
-+
-+#ifdef SM_DEBUG
-+	dev_info(dev, "slot_get_address(): slot %d is 0x%08x\n", slot,
-+		 (u32)ksdata->base_address + slot * smpriv->slot_size);
-+#endif
-+
-+	return ksdata->base_address + slot * smpriv->slot_size;
-+}
-+
-+void *slot_get_physical(struct device *dev, u32 unit, u32 slot)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	struct keystore_data *ksdata = smpriv->pagedesc[unit].ksdata;
-+
-+	if (slot >= ksdata->slot_count)
-+		return NULL;
-+
-+#ifdef SM_DEBUG
-+	dev_info(dev, "%s: slot %d is 0x%08x\n", __func__, slot,
-+		 (u32)ksdata->phys_address + slot * smpriv->slot_size);
-+#endif
-+
-+	return ksdata->phys_address + slot * smpriv->slot_size;
-+}
-+
-+u32 slot_get_base(struct device *dev, u32 unit, u32 slot)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	struct keystore_data *ksdata = smpriv->pagedesc[unit].ksdata;
-+
-+	/*
-+	 * There could potentially be more than one secure partition object
-+	 * associated with this keystore.  For now, there is just one.
-+	 */
-+
-+	(void)slot;
-+
-+#ifdef SM_DEBUG
-+	dev_info(dev, "slot_get_base(): slot %d = 0x%08x\n",
-+		slot, (u32)ksdata->base_address);
-+#endif
-+
-+	return (uintptr_t)(ksdata->base_address);
-+}
-+
-+u32 slot_get_offset(struct device *dev, u32 unit, u32 slot)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	struct keystore_data *ksdata = smpriv->pagedesc[unit].ksdata;
-+
-+	if (slot >= ksdata->slot_count)
-+		return -EINVAL;
-+
-+#ifdef SM_DEBUG
-+	dev_info(dev, "slot_get_offset(): slot %d = %d\n", slot,
-+		slot * smpriv->slot_size);
-+#endif
-+
-+	return slot * smpriv->slot_size;
-+}
-+
-+u32 slot_get_slot_size(struct device *dev, u32 unit, u32 slot)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+
-+
-+#ifdef SM_DEBUG
-+	dev_info(dev, "slot_get_slot_size(): slot %d = %d\n", slot,
-+		 smpriv->slot_size);
-+#endif
-+	/* All slots are the same size in the default implementation */
-+	return smpriv->slot_size;
-+}
-+
-+
-+
-+int kso_init_data(struct device *dev, u32 unit)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	struct keystore_data *keystore_data = NULL;
-+	u32 slot_count;
-+	u32 keystore_data_size;
-+
-+	/*
-+	 * Calculate the required size of the keystore data structure, based
-+	 * on the number of keys that can fit in the partition.
-+	 */
-+	slot_count = smpriv->page_size / smpriv->slot_size;
-+#ifdef SM_DEBUG
-+	dev_info(dev, "kso_init_data: %d slots initializing\n", slot_count);
-+#endif
-+
-+	keystore_data_size = sizeof(struct keystore_data) +
-+				slot_count *
-+				sizeof(struct keystore_data_slot_info);
-+
-+	keystore_data = kzalloc(keystore_data_size, GFP_KERNEL);
-+
-+	if (!keystore_data)
-+		return -ENOMEM;
-+
-+#ifdef SM_DEBUG
-+	dev_info(dev, "kso_init_data: keystore data size = %d\n",
-+		 keystore_data_size);
-+#endif
-+
-+	/*
-+	 * Place the slot information structure directly after the keystore data
-+	 * structure.
-+	 */
-+	keystore_data->slot = (struct keystore_data_slot_info *)
-+			      (keystore_data + 1);
-+	keystore_data->slot_count = slot_count;
-+
-+	smpriv->pagedesc[unit].ksdata = keystore_data;
-+	smpriv->pagedesc[unit].ksdata->base_address =
-+		smpriv->pagedesc[unit].pg_base;
-+	smpriv->pagedesc[unit].ksdata->phys_address =
-+		smpriv->pagedesc[unit].pg_phys;
-+
-+	return 0;
-+}
-+
-+void kso_cleanup_data(struct device *dev, u32 unit)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	struct keystore_data *keystore_data = NULL;
-+
-+	if (smpriv->pagedesc[unit].ksdata != NULL)
-+		keystore_data = smpriv->pagedesc[unit].ksdata;
-+
-+	/* Release the allocated keystore management data */
-+	kfree(smpriv->pagedesc[unit].ksdata);
-+
-+	return;
-+}
-+
-+
-+
-+/*
-+ * Keystore management section
-+ */
-+
-+void sm_init_keystore(struct device *dev)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+
-+	smpriv->data_init = kso_init_data;
-+	smpriv->data_cleanup = kso_cleanup_data;
-+	smpriv->slot_alloc = slot_alloc;
-+	smpriv->slot_dealloc = slot_dealloc;
-+	smpriv->slot_get_address = slot_get_address;
-+	smpriv->slot_get_physical = slot_get_physical;
-+	smpriv->slot_get_base = slot_get_base;
-+	smpriv->slot_get_offset = slot_get_offset;
-+	smpriv->slot_get_slot_size = slot_get_slot_size;
-+#ifdef SM_DEBUG
-+	dev_info(dev, "sm_init_keystore(): handlers installed\n");
-+#endif
-+}
-+EXPORT_SYMBOL(sm_init_keystore);
-+
-+/* Return available pages/units */
-+u32 sm_detect_keystore_units(struct device *dev)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+
-+	return smpriv->localpages;
-+}
-+EXPORT_SYMBOL(sm_detect_keystore_units);
-+
-+/*
-+ * Do any keystore specific initializations
-+ */
-+int sm_establish_keystore(struct device *dev, u32 unit)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+
-+#ifdef SM_DEBUG
-+	dev_info(dev, "sm_establish_keystore(): unit %d initializing\n", unit);
-+#endif
-+
-+	if (smpriv->data_init == NULL)
-+		return -EINVAL;
-+
-+	/* Call the data_init function for any user setup */
-+	return smpriv->data_init(dev, unit);
-+}
-+EXPORT_SYMBOL(sm_establish_keystore);
-+
-+void sm_release_keystore(struct device *dev, u32 unit)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+
-+#ifdef SM_DEBUG
-+	dev_info(dev, "sm_establish_keystore(): unit %d releasing\n", unit);
-+#endif
-+	if ((smpriv != NULL) && (smpriv->data_cleanup != NULL))
-+		smpriv->data_cleanup(dev, unit);
-+
-+	return;
-+}
-+EXPORT_SYMBOL(sm_release_keystore);
-+
-+/*
-+ * Subsequent interfacce (sm_keystore_*) forms the accessor interfacce to
-+ * the keystore
-+ */
-+int sm_keystore_slot_alloc(struct device *dev, u32 unit, u32 size, u32 *slot)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	int retval = -EINVAL;
-+
-+	spin_lock(&smpriv->kslock);
-+
-+	if ((smpriv->slot_alloc == NULL) ||
-+	    (smpriv->pagedesc[unit].ksdata == NULL))
-+		goto out;
-+
-+	retval =  smpriv->slot_alloc(dev, unit, size, slot);
-+
-+out:
-+	spin_unlock(&smpriv->kslock);
-+	return retval;
-+}
-+EXPORT_SYMBOL(sm_keystore_slot_alloc);
-+
-+int sm_keystore_slot_dealloc(struct device *dev, u32 unit, u32 slot)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	int retval = -EINVAL;
-+
-+	spin_lock(&smpriv->kslock);
-+
-+	if ((smpriv->slot_alloc == NULL) ||
-+	    (smpriv->pagedesc[unit].ksdata == NULL))
-+		goto out;
-+
-+	retval = smpriv->slot_dealloc(dev, unit, slot);
-+out:
-+	spin_unlock(&smpriv->kslock);
-+	return retval;
-+}
-+EXPORT_SYMBOL(sm_keystore_slot_dealloc);
-+
-+int sm_keystore_slot_load(struct device *dev, u32 unit, u32 slot,
-+			  const u8 *key_data, u32 key_length)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	int retval = -EINVAL;
-+	u32 slot_size;
-+	u8 __iomem *slot_location;
-+
-+	spin_lock(&smpriv->kslock);
-+
-+	slot_size = smpriv->slot_get_slot_size(dev, unit, slot);
-+
-+	if (key_length > slot_size) {
-+		retval = -EFBIG;
-+		goto out;
-+	}
-+
-+	slot_location = smpriv->slot_get_address(dev, unit, slot);
-+
-+	memcpy_toio(slot_location, key_data, key_length);
-+
-+	retval = 0;
-+
-+out:
-+	spin_unlock(&smpriv->kslock);
-+	return retval;
-+}
-+EXPORT_SYMBOL(sm_keystore_slot_load);
-+
-+int sm_keystore_slot_read(struct device *dev, u32 unit, u32 slot,
-+			  u32 key_length, u8 *key_data)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	int retval = -EINVAL;
-+	u8 __iomem *slot_addr;
-+	u32 slot_size;
-+
-+	spin_lock(&smpriv->kslock);
-+
-+	slot_addr = smpriv->slot_get_address(dev, unit, slot);
-+	slot_size = smpriv->slot_get_slot_size(dev, unit, slot);
-+
-+	if (key_length > slot_size) {
-+		retval = -EKEYREJECTED;
-+		goto out;
-+	}
-+
-+	memcpy_fromio(key_data, slot_addr, key_length);
-+	retval = 0;
-+
-+out:
-+	spin_unlock(&smpriv->kslock);
-+	return retval;
-+}
-+EXPORT_SYMBOL(sm_keystore_slot_read);
-+
-+/*
-+ * Blacken a clear key in a slot. Operates "in place".
-+ * Limited to class 1 keys at the present time
-+ */
-+int sm_keystore_cover_key(struct device *dev, u32 unit, u32 slot,
-+			  u16 key_length, u8 keyauth)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	int retval = 0;
-+	u8 __iomem *slotaddr;
-+	void *slotphys;
-+	u32 dsize, jstat;
-+	u32 __iomem *coverdesc = NULL;
-+
-+	/* Get the address of the object in the slot */
-+	slotaddr = (u8 *)smpriv->slot_get_address(dev, unit, slot);
-+	slotphys = (u8 *)smpriv->slot_get_physical(dev, unit, slot);
-+
-+	dsize = blacken_key_jobdesc(&coverdesc, slotphys, key_length, keyauth);
-+	if (!dsize)
-+		return -ENOMEM;
-+	jstat = sm_key_job(dev, coverdesc);
-+	if (jstat)
-+		retval = -EIO;
-+
-+	kfree(coverdesc);
-+	return retval;
-+}
-+EXPORT_SYMBOL(sm_keystore_cover_key);
-+
-+/* Export a black/red key to a blob in external memory */
-+int sm_keystore_slot_export(struct device *dev, u32 unit, u32 slot, u8 keycolor,
-+			    u8 keyauth, u8 *outbuf, u16 keylen, u8 *keymod)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	int retval = 0;
-+	u8 __iomem *slotaddr, *lkeymod;
-+	u8 __iomem *slotphys;
-+	dma_addr_t keymod_dma, outbuf_dma;
-+	u32 dsize, jstat;
-+	u32 __iomem *encapdesc = NULL;
-+	struct device *dev_for_dma_op;
-+
-+	/* Use the ring as device for DMA operations */
-+	dev_for_dma_op = smpriv->smringdev;
-+
-+	/* Get the base address(es) of the specified slot */
-+	slotaddr = (u8 *)smpriv->slot_get_address(dev, unit, slot);
-+	slotphys = smpriv->slot_get_physical(dev, unit, slot);
-+
-+	/* Allocate memory for key modifier compatible with DMA */
-+	lkeymod = kmalloc(SECMEM_KEYMOD_LEN, GFP_KERNEL | GFP_DMA);
-+	if (!lkeymod) {
-+		retval = (-ENOMEM);
-+		goto exit;
-+	}
-+
-+	/* Get DMA address for the key modifier */
-+	keymod_dma = dma_map_single(dev_for_dma_op, lkeymod,
-+					SECMEM_KEYMOD_LEN, DMA_TO_DEVICE);
-+	if (dma_mapping_error(dev_for_dma_op, keymod_dma)) {
-+		dev_err(dev, "unable to map keymod: %p\n", lkeymod);
-+		retval = (-ENOMEM);
-+		goto free_keymod;
-+	}
-+
-+	/* Copy the keymod and synchronize the DMA */
-+	memcpy(lkeymod, keymod, SECMEM_KEYMOD_LEN);
-+	dma_sync_single_for_device(dev_for_dma_op, keymod_dma,
-+					SECMEM_KEYMOD_LEN, DMA_TO_DEVICE);
-+
-+	/* Get DMA address for the destination */
-+	outbuf_dma = dma_map_single(dev_for_dma_op, outbuf,
-+				keylen + BLOB_OVERHEAD, DMA_FROM_DEVICE);
-+	if (dma_mapping_error(dev_for_dma_op, outbuf_dma)) {
-+		dev_err(dev, "unable to map outbuf: %p\n", outbuf);
-+		retval = (-ENOMEM);
-+		goto unmap_keymod;
-+	}
-+
-+	/* Build the encapsulation job descriptor */
-+	dsize = blob_encap_jobdesc(&encapdesc, keymod_dma, slotphys, outbuf_dma,
-+				   keylen, keycolor, SM_SECMEM, keyauth);
-+	if (!dsize) {
-+		dev_err(dev, "can't alloc an encapsulation descriptor\n");
-+		retval = -ENOMEM;
-+		goto unmap_outbuf;
-+	}
-+
-+	/* Run the job */
-+	jstat = sm_key_job(dev, encapdesc);
-+	if (jstat) {
-+		retval = (-EIO);
-+		goto free_desc;
-+	}
-+
-+	/* Synchronize the data received */
-+	dma_sync_single_for_cpu(dev_for_dma_op, outbuf_dma,
-+			keylen + BLOB_OVERHEAD, DMA_FROM_DEVICE);
-+
-+free_desc:
-+	kfree(encapdesc);
-+
-+unmap_outbuf:
-+	dma_unmap_single(dev_for_dma_op, outbuf_dma, keylen + BLOB_OVERHEAD,
-+			DMA_FROM_DEVICE);
-+
-+unmap_keymod:
-+	dma_unmap_single(dev_for_dma_op, keymod_dma, SECMEM_KEYMOD_LEN,
-+			DMA_TO_DEVICE);
-+
-+free_keymod:
-+	kfree(lkeymod);
-+
-+exit:
-+	return retval;
-+}
-+EXPORT_SYMBOL(sm_keystore_slot_export);
-+
-+/* Import a black/red key from a blob residing in external memory */
-+int sm_keystore_slot_import(struct device *dev, u32 unit, u32 slot, u8 keycolor,
-+			    u8 keyauth, u8 *inbuf, u16 keylen, u8 *keymod)
-+{
-+	struct caam_drv_private_sm *smpriv = dev_get_drvdata(dev);
-+	int retval = 0;
-+	u8 __iomem *slotaddr, *lkeymod;
-+	u8 __iomem *slotphys;
-+	dma_addr_t keymod_dma, inbuf_dma;
-+	u32 dsize, jstat;
-+	u32 __iomem *decapdesc = NULL;
-+	struct device *dev_for_dma_op;
-+
-+	/* Use the ring as device for DMA operations */
-+	dev_for_dma_op = smpriv->smringdev;
-+
-+	/* Get the base address(es) of the specified slot */
-+	slotaddr = (u8 *)smpriv->slot_get_address(dev, unit, slot);
-+	slotphys = smpriv->slot_get_physical(dev, unit, slot);
-+
-+	/* Allocate memory for key modifier compatible with DMA */
-+	lkeymod = kmalloc(SECMEM_KEYMOD_LEN, GFP_KERNEL | GFP_DMA);
-+	if (!lkeymod) {
-+		retval = (-ENOMEM);
-+		goto exit;
-+	}
-+
-+	/* Get DMA address for the key modifier */
-+	keymod_dma = dma_map_single(dev_for_dma_op, lkeymod,
-+					SECMEM_KEYMOD_LEN, DMA_TO_DEVICE);
-+	if (dma_mapping_error(dev_for_dma_op, keymod_dma)) {
-+		dev_err(dev, "unable to map keymod: %p\n", lkeymod);
-+		retval = (-ENOMEM);
-+		goto free_keymod;
-+	}
-+
-+	/* Copy the keymod and synchronize the DMA */
-+	memcpy(lkeymod, keymod, SECMEM_KEYMOD_LEN);
-+	dma_sync_single_for_device(dev_for_dma_op, keymod_dma,
-+					SECMEM_KEYMOD_LEN, DMA_TO_DEVICE);
-+
-+	/* Get DMA address for the input */
-+	inbuf_dma = dma_map_single(dev_for_dma_op, inbuf,
-+					keylen + BLOB_OVERHEAD, DMA_TO_DEVICE);
-+	if (dma_mapping_error(dev_for_dma_op, inbuf_dma)) {
-+		dev_err(dev, "unable to map inbuf: %p\n", (void *)inbuf_dma);
-+		retval = (-ENOMEM);
-+		goto unmap_keymod;
-+	}
-+
-+	/* synchronize the DMA */
-+	dma_sync_single_for_device(dev_for_dma_op, inbuf_dma,
-+					keylen + BLOB_OVERHEAD, DMA_TO_DEVICE);
-+
-+	/* Build the encapsulation job descriptor */
-+	dsize = blob_decap_jobdesc(&decapdesc, keymod_dma, inbuf_dma, slotphys,
-+				   keylen, keycolor, SM_SECMEM, keyauth);
-+	if (!dsize) {
-+		dev_err(dev, "can't alloc a decapsulation descriptor\n");
-+		retval = -ENOMEM;
-+		goto unmap_inbuf;
-+	}
-+
-+	/* Run the job */
-+	jstat = sm_key_job(dev, decapdesc);
-+
-+	/*
-+	 * May want to expand upon error meanings a bit. Any CAAM status
-+	 * is reported as EIO, but we might want to look for something more
-+	 * meaningful for something like an ICV error on restore, otherwise
-+	 * the caller is left guessing.
-+	 */
-+	if (jstat) {
-+		retval = (-EIO);
-+		goto free_desc;
-+	}
-+
-+free_desc:
-+	kfree(decapdesc);
-+
-+unmap_inbuf:
-+	dma_unmap_single(dev_for_dma_op, inbuf_dma, keylen + BLOB_OVERHEAD,
-+			DMA_TO_DEVICE);
-+
-+unmap_keymod:
-+	dma_unmap_single(dev_for_dma_op, keymod_dma, SECMEM_KEYMOD_LEN,
-+			DMA_TO_DEVICE);
-+
-+free_keymod:
-+	kfree(lkeymod);
-+
-+exit:
-+	return retval;
-+}
-+EXPORT_SYMBOL(sm_keystore_slot_import);
-+
-+/*
-+ * Initialization/shutdown subsystem
-+ * Assumes statically-invoked startup/shutdown from the controller driver
-+ * for the present time, to be reworked when a device tree becomes
-+ * available. This code will not modularize in present form.
-+ *
-+ * Also, simply uses ring 0 for execution at the present
-+ */
-+
-+int caam_sm_startup(struct platform_device *pdev)
-+{
-+	struct device *ctrldev, *smdev;
-+	struct caam_drv_private *ctrlpriv;
-+	struct caam_drv_private_sm *smpriv;
-+	struct caam_drv_private_jr *jrpriv;	/* need this for reg page */
-+	struct platform_device *sm_pdev;
-+	struct sm_page_descriptor *lpagedesc;
-+	u32 page, pgstat, lpagect, detectedpage, smvid, smpart;
-+	int ret = 0;
-+
-+	struct device_node *np;
-+	ctrldev = &pdev->dev;
-+	ctrlpriv = dev_get_drvdata(ctrldev);
-+
-+	/*
-+	 * If ctrlpriv is NULL, it's probably because the caam driver wasn't
-+	 * properly initialized (e.g. RNG4 init failed). Thus, bail out here.
-+	 */
-+	if (!ctrlpriv) {
-+		ret = -ENODEV;
-+		goto exit;
-+	}
-+
-+	/*
-+	 * Set up the private block for secure memory
-+	 * Only one instance is possible
-+	 */
-+	smpriv = kzalloc(sizeof(struct caam_drv_private_sm), GFP_KERNEL);
-+	if (smpriv == NULL) {
-+		dev_err(ctrldev, "can't alloc private mem for secure memory\n");
-+		ret = -ENOMEM;
-+		goto exit;
-+	}
-+	smpriv->parentdev = ctrldev; /* copy of parent dev is handy */
-+	spin_lock_init(&smpriv->kslock);
-+
-+	/* Create the dev */
-+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-caam-sm");
-+	if (np)
-+		of_node_clear_flag(np, OF_POPULATED);
-+	sm_pdev = of_platform_device_create(np, "caam_sm", ctrldev);
-+
-+	if (sm_pdev == NULL) {
-+		ret = -EINVAL;
-+		goto free_smpriv;
-+	}
-+
-+	/* Save a pointer to the platform device for Secure Memory */
-+	smpriv->sm_pdev = sm_pdev;
-+	smdev = &sm_pdev->dev;
-+	dev_set_drvdata(smdev, smpriv);
-+	ctrlpriv->smdev = smdev;
-+
-+	/* Set the Secure Memory Register Map Version */
-+	smvid = rd_reg32(&ctrlpriv->jr[0]->perfmon.smvid);
-+	smpart = rd_reg32(&ctrlpriv->jr[0]->perfmon.smpart);
-+
-+	if (smvid < SMVID_V2)
-+		smpriv->sm_reg_offset = SM_V1_OFFSET;
-+	else
-+		smpriv->sm_reg_offset = SM_V2_OFFSET;
-+
-+	/*
-+	 * Collect configuration limit data for reference
-+	 * This batch comes from the partition data/vid registers in perfmon
-+	 */
-+	smpriv->max_pages = ((smpart & SMPART_MAX_NUMPG_MASK) >>
-+			    SMPART_MAX_NUMPG_SHIFT) + 1;
-+	smpriv->top_partition = ((smpart & SMPART_MAX_PNUM_MASK) >>
-+				SMPART_MAX_PNUM_SHIFT) + 1;
-+	smpriv->top_page =  ((smpart & SMPART_MAX_PG_MASK) >>
-+				SMPART_MAX_PG_SHIFT) + 1;
-+	smpriv->page_size = 1024 << ((smvid & SMVID_PG_SIZE_MASK) >>
-+				SMVID_PG_SIZE_SHIFT);
-+	smpriv->slot_size = 1 << CONFIG_CRYPTO_DEV_FSL_CAAM_SM_SLOTSIZE;
-+
-+#ifdef SM_DEBUG
-+	dev_info(smdev, "max pages = %d, top partition = %d\n",
-+			smpriv->max_pages, smpriv->top_partition);
-+	dev_info(smdev, "top page = %d, page size = %d (total = %d)\n",
-+			smpriv->top_page, smpriv->page_size,
-+			smpriv->top_page * smpriv->page_size);
-+	dev_info(smdev, "selected slot size = %d\n", smpriv->slot_size);
-+#endif
-+
-+	/*
-+	 * Now probe for partitions/pages to which we have access. Note that
-+	 * these have likely been set up by a bootloader or platform
-+	 * provisioning application, so we have to assume that we "inherit"
-+	 * a configuration and work within the constraints of what it might be.
-+	 *
-+	 * Assume use of the zeroth ring in the present iteration (until
-+	 * we can divorce the controller and ring drivers, and then assign
-+	 * an SM instance to any ring instance).
-+	 */
-+	smpriv->smringdev = caam_jr_alloc();
-+	if (!smpriv->smringdev) {
-+		dev_err(smdev, "Device for job ring not created\n");
-+		ret = -ENODEV;
-+		goto unregister_smpdev;
-+	}
-+
-+	jrpriv = dev_get_drvdata(smpriv->smringdev);
-+	lpagect = 0;
-+	pgstat = 0;
-+	lpagedesc = kzalloc(sizeof(struct sm_page_descriptor)
-+			    * smpriv->max_pages, GFP_KERNEL);
-+	if (lpagedesc == NULL) {
-+		ret = -ENOMEM;
-+		goto free_smringdev;
-+	}
-+
-+	for (page = 0; page < smpriv->max_pages; page++) {
-+		u32 page_ownership;
-+
-+		if (sm_send_cmd(smpriv, jrpriv,
-+				((page << SMC_PAGE_SHIFT) & SMC_PAGE_MASK) |
-+				(SMC_CMD_PAGE_INQUIRY & SMC_CMD_MASK),
-+				&pgstat)) {
-+			ret = -EINVAL;
-+			goto free_lpagedesc;
-+		}
-+
-+		page_ownership = (pgstat & SMCS_PGWON_MASK) >> SMCS_PGOWN_SHIFT;
-+		if ((page_ownership == SMCS_PGOWN_OWNED)
-+			|| (page_ownership == SMCS_PGOWN_NOOWN)) {
-+			/* page allocated */
-+			lpagedesc[page].phys_pagenum =
-+				(pgstat & SMCS_PAGE_MASK) >> SMCS_PAGE_SHIFT;
-+			lpagedesc[page].own_part =
-+				(pgstat & SMCS_PART_SHIFT) >> SMCS_PART_MASK;
-+			lpagedesc[page].pg_base = (u8 *)ctrlpriv->sm_base +
-+				(smpriv->page_size * page);
-+			if (ctrlpriv->scu_en) {
-+/* FIXME: get different addresses viewed by CPU and CAAM from
-+ * platform property
-+ */
-+				lpagedesc[page].pg_phys = (u8 *)0x20800000 +
-+					(smpriv->page_size * page);
-+			} else {
-+				lpagedesc[page].pg_phys =
-+					(u8 *) ctrlpriv->sm_phy +
-+					(smpriv->page_size * page);
-+			}
-+			lpagect++;
-+#ifdef SM_DEBUG
-+			dev_info(smdev,
-+				"physical page %d, owning partition = %d\n",
-+				lpagedesc[page].phys_pagenum,
-+				lpagedesc[page].own_part);
-+#endif
-+		}
-+	}
-+
-+	smpriv->pagedesc = kzalloc(sizeof(struct sm_page_descriptor) * lpagect,
-+				   GFP_KERNEL);
-+	if (smpriv->pagedesc == NULL) {
-+		ret = -ENOMEM;
-+		goto free_lpagedesc;
-+	}
-+	smpriv->localpages = lpagect;
-+
-+	detectedpage = 0;
-+	for (page = 0; page < smpriv->max_pages; page++) {
-+		if (lpagedesc[page].pg_base != NULL) {	/* e.g. live entry */
-+			memcpy(&smpriv->pagedesc[detectedpage],
-+			       &lpagedesc[page],
-+			       sizeof(struct sm_page_descriptor));
-+#ifdef SM_DEBUG_CONT
-+			sm_show_page(smdev, &smpriv->pagedesc[detectedpage]);
-+#endif
-+			detectedpage++;
-+		}
-+	}
-+
-+	kfree(lpagedesc);
-+
-+	sm_init_keystore(smdev);
-+
-+	goto exit;
-+
-+free_lpagedesc:
-+	kfree(lpagedesc);
-+free_smringdev:
-+	caam_jr_free(smpriv->smringdev);
-+unregister_smpdev:
-+	of_device_unregister(smpriv->sm_pdev);
-+free_smpriv:
-+	kfree(smpriv);
-+
-+exit:
-+	return ret;
-+}
-+
-+void caam_sm_shutdown(struct platform_device *pdev)
-+{
-+	struct device *ctrldev, *smdev;
-+	struct caam_drv_private *priv;
-+	struct caam_drv_private_sm *smpriv;
-+
-+	ctrldev = &pdev->dev;
-+	priv = dev_get_drvdata(ctrldev);
-+	smdev = priv->smdev;
-+
-+	/* Return if resource not initialized by startup */
-+	if (smdev == NULL)
-+		return;
-+
-+	smpriv = dev_get_drvdata(smdev);
-+
-+	caam_jr_free(smpriv->smringdev);
-+
-+	/* Remove Secure Memory Platform Device */
-+	of_device_unregister(smpriv->sm_pdev);
-+
-+	kfree(smpriv->pagedesc);
-+	kfree(smpriv);
-+}
-+EXPORT_SYMBOL(caam_sm_shutdown);
-+
-+static void  __exit caam_sm_exit(void)
-+{
-+	struct device_node *dev_node;
-+	struct platform_device *pdev;
-+
-+	dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
-+	if (!dev_node) {
-+		dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
-+		if (!dev_node)
-+			return;
-+	}
-+
-+	pdev = of_find_device_by_node(dev_node);
-+	if (!pdev)
-+		return;
-+
-+	of_node_put(dev_node);
-+
-+	caam_sm_shutdown(pdev);
-+
-+	return;
-+}
-+
-+static int __init caam_sm_init(void)
-+{
-+	struct device_node *dev_node;
-+	struct platform_device *pdev;
-+
-+	/*
-+	 * Do of_find_compatible_node() then of_find_device_by_node()
-+	 * once a functional device tree is available
-+	 */
-+	dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
-+	if (!dev_node) {
-+		dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
-+		if (!dev_node)
-+			return -ENODEV;
-+	}
-+
-+	pdev = of_find_device_by_node(dev_node);
-+	if (!pdev)
-+		return -ENODEV;
-+
-+	of_node_get(dev_node);
-+
-+	caam_sm_startup(pdev);
-+
-+	return 0;
-+}
-+
-+module_init(caam_sm_init);
-+module_exit(caam_sm_exit);
-+
-+MODULE_LICENSE("Dual BSD/GPL");
-+MODULE_DESCRIPTION("FSL CAAM Secure Memory / Keystore");
-+MODULE_AUTHOR("Freescale Semiconductor - NMSG/MAD");
---- /dev/null
-+++ b/drivers/crypto/caam/sm_test.c
-@@ -0,0 +1,571 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-+/*
-+ * Secure Memory / Keystore Exemplification Module
-+ *
-+ * Copyright 2012-2015 Freescale Semiconductor, Inc.
-+ * Copyright 2016-2019 NXP
-+ *
-+ * This module has been overloaded as an example to show:
-+ * - Secure memory subsystem initialization/shutdown
-+ * - Allocation/deallocation of "slots" in a secure memory page
-+ * - Loading and unloading of key material into slots
-+ * - Covering of secure memory objects into "black keys" (ECB only at present)
-+ * - Verification of key covering (by differentiation only)
-+ * - Exportation of keys into secure memory blobs (with display of result)
-+ * - Importation of keys from secure memory blobs (with display of result)
-+ * - Verification of re-imported keys where possible.
-+ *
-+ * The module does not show the use of key objects as working key register
-+ * source material at this time.
-+ *
-+ * This module can use a substantial amount of refactoring, which may occur
-+ * after the API gets some mileage. Furthermore, expect this module to
-+ * eventually disappear once the API is integrated into "real" software.
-+ */
-+
-+#include "compat.h"
-+#include "regs.h"
-+#include "intern.h"
-+#include "desc.h"
-+#include "error.h"
-+#include "jr.h"
-+#include "sm.h"
-+
-+/* Fixed known pattern for a key modifier */
-+static u8 skeymod[] = {
-+	0x0f, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08,
-+	0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00
-+};
-+
-+/* Fixed known pattern for a key */
-+static u8 clrkey[] = {
-+	0x00, 0x01, 0x02, 0x03, 0x04, 0x0f, 0x06, 0x07,
-+	0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
-+	0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-+	0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
-+	0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
-+	0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
-+	0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
-+	0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-+	0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
-+	0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
-+	0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
-+	0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
-+	0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
-+	0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
-+	0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77,
-+	0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f,
-+	0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-+	0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
-+	0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
-+	0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f,
-+	0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7,
-+	0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf,
-+	0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, 0xb7,
-+	0xb8, 0xb9, 0xba, 0xbb, 0xbc, 0xbd, 0xbe, 0xbf,
-+	0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7,
-+	0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf,
-+	0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7,
-+	0xd8, 0xd9, 0xda, 0xdb, 0xdc, 0xdd, 0xde, 0xdf,
-+	0xe0, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7,
-+	0xe8, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xee, 0xef,
-+	0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7,
-+	0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff
-+};
-+
-+static void key_display(struct device *dev, const char *label, u16 size,
-+			u8 *key)
-+{
-+	unsigned i;
-+
-+	dev_dbg(dev, "%s", label);
-+	for (i = 0; i < size; i += 8)
-+		dev_dbg(dev,
-+			"[%04d] %02x %02x %02x %02x %02x %02x %02x %02x\n",
-+			i, key[i], key[i + 1], key[i + 2], key[i + 3],
-+			key[i + 4], key[i + 5], key[i + 6], key[i + 7]);
-+}
-+
-+int caam_sm_example_init(struct platform_device *pdev)
-+{
-+	struct device *ctrldev, *ksdev;
-+	struct caam_drv_private *ctrlpriv;
-+	struct caam_drv_private_sm *kspriv;
-+	u32 unit, units;
-+	int rtnval;
-+	u8 clrkey8[8], clrkey16[16], clrkey24[24], clrkey32[32];
-+	u8 blkkey8[AES_BLOCK_PAD(8)], blkkey16[AES_BLOCK_PAD(16)];
-+	u8 blkkey24[AES_BLOCK_PAD(24)], blkkey32[AES_BLOCK_PAD(32)];
-+	u8 rstkey8[AES_BLOCK_PAD(8)], rstkey16[AES_BLOCK_PAD(16)];
-+	u8 rstkey24[AES_BLOCK_PAD(24)], rstkey32[AES_BLOCK_PAD(32)];
-+	u8 __iomem *blob8, *blob16, *blob24, *blob32;
-+	u32 keyslot8, keyslot16, keyslot24, keyslot32 = 0;
-+
-+	blob8 = blob16 = blob24 = blob32 = NULL;
-+
-+	/*
-+	 * 3.5.x and later revs for MX6 should be able to ditch this
-+	 * and detect via dts property
-+	 */
-+	ctrldev = &pdev->dev;
-+	ctrlpriv = dev_get_drvdata(ctrldev);
-+
-+	/*
-+	 * If ctrlpriv is NULL, it's probably because the caam driver wasn't
-+	 * properly initialized (e.g. RNG4 init failed). Thus, bail out here.
-+	 */
-+	if (!ctrlpriv)
-+		return -ENODEV;
-+
-+	ksdev = ctrlpriv->smdev;
-+	kspriv = dev_get_drvdata(ksdev);
-+	if (kspriv == NULL)
-+		return -ENODEV;
-+
-+	/* What keystores are available ? */
-+	units = sm_detect_keystore_units(ksdev);
-+	if (!units)
-+		dev_err(ksdev, "blkkey_ex: no keystore units available\n");
-+
-+	/*
-+	 * MX6 bootloader stores some stuff in unit 0, so let's
-+	 * use 1 or above
-+	 */
-+	if (units < 2) {
-+		dev_err(ksdev, "blkkey_ex: insufficient keystore units\n");
-+		return -ENODEV;
-+	}
-+	unit = 1;
-+
-+	dev_info(ksdev, "blkkey_ex: %d keystore units available\n", units);
-+
-+	/* Initialize/Establish Keystore */
-+	sm_establish_keystore(ksdev, unit);	/* Initalize store in #1 */
-+
-+	/*
-+	 * Now let's set up buffers for blobs in DMA-able memory. All are
-+	 * larger than need to be so that blob size can be seen.
-+	 */
-+	blob8 = kzalloc(128, GFP_KERNEL | GFP_DMA);
-+	blob16 = kzalloc(128, GFP_KERNEL | GFP_DMA);
-+	blob24 = kzalloc(128, GFP_KERNEL | GFP_DMA);
-+	blob32 = kzalloc(128, GFP_KERNEL | GFP_DMA);
-+
-+	if ((blob8 == NULL) || (blob16 == NULL) || (blob24 == NULL) ||
-+	    (blob32 == NULL)) {
-+		rtnval = -ENOMEM;
-+		dev_err(ksdev, "blkkey_ex: can't get blob buffers\n");
-+		goto freemem;
-+	}
-+
-+	/* Initialize clear keys with a known and recognizable pattern */
-+	memcpy(clrkey8, clrkey, 8);
-+	memcpy(clrkey16, clrkey, 16);
-+	memcpy(clrkey24, clrkey, 24);
-+	memcpy(clrkey32, clrkey, 32);
-+
-+	memset(blkkey8, 0, AES_BLOCK_PAD(8));
-+	memset(blkkey16, 0, AES_BLOCK_PAD(16));
-+	memset(blkkey24, 0, AES_BLOCK_PAD(24));
-+	memset(blkkey32, 0, AES_BLOCK_PAD(32));
-+
-+	memset(rstkey8, 0, AES_BLOCK_PAD(8));
-+	memset(rstkey16, 0, AES_BLOCK_PAD(16));
-+	memset(rstkey24, 0, AES_BLOCK_PAD(24));
-+	memset(rstkey32, 0, AES_BLOCK_PAD(32));
-+
-+	/*
-+	 * Allocate keyslots. Since we're going to blacken keys in-place,
-+	 * we want slots big enough to pad out to the next larger AES blocksize
-+	 * so pad them out.
-+	 */
-+	rtnval = sm_keystore_slot_alloc(ksdev, unit, AES_BLOCK_PAD(8),
-+					&keyslot8);
-+	if (rtnval)
-+		goto freemem;
-+
-+	rtnval = sm_keystore_slot_alloc(ksdev, unit, AES_BLOCK_PAD(16),
-+					&keyslot16);
-+	if (rtnval)
-+		goto dealloc_slot8;
-+
-+	rtnval = sm_keystore_slot_alloc(ksdev, unit, AES_BLOCK_PAD(24),
-+					&keyslot24);
-+	if (rtnval)
-+		goto dealloc_slot16;
-+
-+	rtnval = sm_keystore_slot_alloc(ksdev, unit, AES_BLOCK_PAD(32),
-+					&keyslot32);
-+	if (rtnval)
-+		goto dealloc_slot24;
-+
-+
-+	/* Now load clear key data into the newly allocated slots */
-+	rtnval = sm_keystore_slot_load(ksdev, unit, keyslot8, clrkey8, 8);
-+	if (rtnval)
-+		goto dealloc;
-+
-+	rtnval = sm_keystore_slot_load(ksdev, unit, keyslot16, clrkey16, 16);
-+	if (rtnval)
-+		goto dealloc;
-+
-+	rtnval = sm_keystore_slot_load(ksdev, unit, keyslot24, clrkey24, 24);
-+	if (rtnval)
-+		goto dealloc;
-+
-+	rtnval = sm_keystore_slot_load(ksdev, unit, keyslot32, clrkey32, 32);
-+	if (rtnval)
-+		goto dealloc;
-+
-+	/*
-+	 * All cleartext keys are loaded into slots (in an unprotected
-+	 * partition at this time)
-+	 *
-+	 * Cover keys in-place
-+	 */
-+	rtnval = sm_keystore_cover_key(ksdev, unit, keyslot8, 8, KEY_COVER_ECB);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't cover 64-bit key\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = sm_keystore_cover_key(ksdev, unit, keyslot16, 16,
-+				       KEY_COVER_ECB);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't cover 128-bit key\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = sm_keystore_cover_key(ksdev, unit, keyslot24, 24,
-+				       KEY_COVER_ECB);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't cover 192-bit key\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = sm_keystore_cover_key(ksdev, unit, keyslot32, 32,
-+				       KEY_COVER_ECB);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't cover 256-bit key\n");
-+		goto dealloc;
-+	}
-+
-+	/*
-+	 * Keys should be covered and appear sufficiently "random"
-+	 * as a result of the covering (blackening) process. Assuming
-+	 * non-secure mode, read them back out for examination; they should
-+	 * appear as random data, completely differing from the clear
-+	 * inputs. So, this will read them back from secure memory and
-+	 * compare them. If they match the clear key, then the covering
-+	 * operation didn't occur.
-+	 */
-+
-+	rtnval = sm_keystore_slot_read(ksdev, unit, keyslot8, AES_BLOCK_PAD(8),
-+				       blkkey8);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't read 64-bit black key\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = sm_keystore_slot_read(ksdev, unit, keyslot16,
-+				       AES_BLOCK_PAD(16), blkkey16);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't read 128-bit black key\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = sm_keystore_slot_read(ksdev, unit, keyslot24,
-+				       AES_BLOCK_PAD(24), blkkey24);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't read 192-bit black key\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = sm_keystore_slot_read(ksdev, unit, keyslot32,
-+				       AES_BLOCK_PAD(32), blkkey32);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't read 256-bit black key\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = -EINVAL;
-+	if (!memcmp(blkkey8, clrkey8, 8)) {
-+		dev_err(ksdev, "blkkey_ex: 64-bit key cover failed\n");
-+		goto dealloc;
-+	}
-+
-+	if (!memcmp(blkkey16, clrkey16, 16)) {
-+		dev_err(ksdev, "blkkey_ex: 128-bit key cover failed\n");
-+		goto dealloc;
-+	}
-+
-+	if (!memcmp(blkkey24, clrkey24, 24)) {
-+		dev_err(ksdev, "blkkey_ex: 192-bit key cover failed\n");
-+		goto dealloc;
-+	}
-+
-+	if (!memcmp(blkkey32, clrkey32, 32)) {
-+		dev_err(ksdev, "blkkey_ex: 256-bit key cover failed\n");
-+		goto dealloc;
-+	}
-+
-+
-+	key_display(ksdev, "64-bit clear key:", 8, clrkey8);
-+	key_display(ksdev, "64-bit black key:", AES_BLOCK_PAD(8), blkkey8);
-+
-+	key_display(ksdev, "128-bit clear key:", 16, clrkey16);
-+	key_display(ksdev, "128-bit black key:", AES_BLOCK_PAD(16), blkkey16);
-+
-+	key_display(ksdev, "192-bit clear key:", 24, clrkey24);
-+	key_display(ksdev, "192-bit black key:", AES_BLOCK_PAD(24), blkkey24);
-+
-+	key_display(ksdev, "256-bit clear key:", 32, clrkey32);
-+	key_display(ksdev, "256-bit black key:", AES_BLOCK_PAD(32), blkkey32);
-+
-+	/*
-+	 * Now encapsulate all keys as SM blobs out to external memory
-+	 * Blobs will appear as random-looking blocks of data different
-+	 * from the original source key, and 48 bytes longer than the
-+	 * original key, to account for the extra data encapsulated within.
-+	 */
-+	key_display(ksdev, "64-bit unwritten blob:", 96, blob8);
-+	key_display(ksdev, "128-bit unwritten blob:", 96, blob16);
-+	key_display(ksdev, "196-bit unwritten blob:", 96, blob24);
-+	key_display(ksdev, "256-bit unwritten blob:", 96, blob32);
-+
-+	rtnval = sm_keystore_slot_export(ksdev, unit, keyslot8, BLACK_KEY,
-+					 KEY_COVER_ECB, blob8, 8, skeymod);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't encapsulate 64-bit key\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = sm_keystore_slot_export(ksdev, unit, keyslot16, BLACK_KEY,
-+					 KEY_COVER_ECB, blob16, 16, skeymod);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't encapsulate 128-bit key\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = sm_keystore_slot_export(ksdev, unit, keyslot24, BLACK_KEY,
-+					 KEY_COVER_ECB, blob24, 24, skeymod);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't encapsulate 192-bit key\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = sm_keystore_slot_export(ksdev, unit, keyslot32, BLACK_KEY,
-+					 KEY_COVER_ECB, blob32, 32, skeymod);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't encapsulate 256-bit key\n");
-+		goto dealloc;
-+	}
-+
-+	key_display(ksdev, "64-bit black key in blob:", 96, blob8);
-+	key_display(ksdev, "128-bit black key in blob:", 96, blob16);
-+	key_display(ksdev, "192-bit black key in blob:", 96, blob24);
-+	key_display(ksdev, "256-bit black key in blob:", 96, blob32);
-+
-+	/*
-+	 * Now re-import black keys from secure-memory blobs stored
-+	 * in general memory from the previous operation. Since we are
-+	 * working with black keys, and since power has not cycled, the
-+	 * restored black keys should match the original blackened keys
-+	 * (this would not be true if the blobs were save in some non-volatile
-+	 * store, and power was cycled between the save and restore)
-+	 */
-+	rtnval = sm_keystore_slot_import(ksdev, unit, keyslot8, BLACK_KEY,
-+					 KEY_COVER_ECB, blob8, 8, skeymod);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't decapsulate 64-bit blob\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = sm_keystore_slot_import(ksdev, unit, keyslot16, BLACK_KEY,
-+					 KEY_COVER_ECB, blob16, 16, skeymod);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't decapsulate 128-bit blob\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = sm_keystore_slot_import(ksdev, unit, keyslot24, BLACK_KEY,
-+					 KEY_COVER_ECB, blob24, 24, skeymod);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't decapsulate 196-bit blob\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = sm_keystore_slot_import(ksdev, unit, keyslot32, BLACK_KEY,
-+					 KEY_COVER_ECB, blob32, 32, skeymod);
-+	if (rtnval) {
-+		dev_err(ksdev, "blkkey_ex: can't decapsulate 256-bit blob\n");
-+		goto dealloc;
-+	}
-+
-+
-+	/*
-+	 * Blobs are now restored as black keys. Read those black keys back
-+	 * for a comparison with the original black key, they should match
-+	 */
-+	rtnval = sm_keystore_slot_read(ksdev, unit, keyslot8, AES_BLOCK_PAD(8),
-+				       rstkey8);
-+	if (rtnval) {
-+		dev_err(ksdev,
-+			"blkkey_ex: can't read restored 64-bit black key\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = sm_keystore_slot_read(ksdev, unit, keyslot16,
-+				       AES_BLOCK_PAD(16), rstkey16);
-+	if (rtnval) {
-+		dev_err(ksdev,
-+			"blkkey_ex: can't read restored 128-bit black key\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = sm_keystore_slot_read(ksdev, unit, keyslot24,
-+				       AES_BLOCK_PAD(24), rstkey24);
-+	if (rtnval) {
-+		dev_err(ksdev,
-+			"blkkey_ex: can't read restored 196-bit black key\n");
-+		goto dealloc;
-+	}
-+
-+	rtnval = sm_keystore_slot_read(ksdev, unit, keyslot32,
-+				       AES_BLOCK_PAD(32), rstkey32);
-+	if (rtnval) {
-+		dev_err(ksdev,
-+			"blkkey_ex: can't read restored 256-bit black key\n");
-+		goto dealloc;
-+	}
-+
-+	key_display(ksdev, "restored 64-bit black key:", AES_BLOCK_PAD(8),
-+		    rstkey8);
-+	key_display(ksdev, "restored 128-bit black key:", AES_BLOCK_PAD(16),
-+		    rstkey16);
-+	key_display(ksdev, "restored 192-bit black key:", AES_BLOCK_PAD(24),
-+		    rstkey24);
-+	key_display(ksdev, "restored 256-bit black key:", AES_BLOCK_PAD(32),
-+		    rstkey32);
-+
-+	/*
-+	 * Compare the restored black keys with the original blackened keys
-+	 * As long as we're operating within the same power cycle, a black key
-+	 * restored from a blob should match the original black key IF the
-+	 * key happens to be of a size that matches a multiple of the AES
-+	 * blocksize. Any key that is padded to fill the block size will not
-+	 * match, excepting a key that exceeds a block; only the first full
-+	 * blocks will match (assuming ECB).
-+	 *
-+	 * Therefore, compare the 16 and 32 bit keys, they should match.
-+	 * The 24 bit key can only match within the first 16 byte block.
-+	 */
-+
-+	if (memcmp(rstkey16, blkkey16, AES_BLOCK_PAD(16))) {
-+		dev_err(ksdev, "blkkey_ex: 128-bit restored key mismatch\n");
-+		rtnval = -EINVAL;
-+	}
-+
-+	/* Only first AES block will match, remainder subject to padding */
-+	if (memcmp(rstkey24, blkkey24, 16)) {
-+		dev_err(ksdev, "blkkey_ex: 192-bit restored key mismatch\n");
-+		rtnval = -EINVAL;
-+	}
-+
-+	if (memcmp(rstkey32, blkkey32, AES_BLOCK_PAD(32))) {
-+		dev_err(ksdev, "blkkey_ex: 256-bit restored key mismatch\n");
-+		rtnval = -EINVAL;
-+	}
-+
-+
-+	/* Remove keys from keystore */
-+dealloc:
-+	sm_keystore_slot_dealloc(ksdev, unit, keyslot32);
-+dealloc_slot24:
-+	sm_keystore_slot_dealloc(ksdev, unit, keyslot24);
-+dealloc_slot16:
-+	sm_keystore_slot_dealloc(ksdev, unit, keyslot16);
-+dealloc_slot8:
-+	sm_keystore_slot_dealloc(ksdev, unit, keyslot8);
-+
-+	/* Free resources */
-+freemem:
-+	kfree(blob8);
-+	kfree(blob16);
-+	kfree(blob24);
-+	kfree(blob32);
-+
-+	/* Disconnect from keystore and leave */
-+	sm_release_keystore(ksdev, unit);
-+
-+	return rtnval;
-+}
-+EXPORT_SYMBOL(caam_sm_example_init);
-+
-+void caam_sm_example_shutdown(void)
-+{
-+	/* unused in present version */
-+	struct device_node *dev_node;
-+	struct platform_device *pdev;
-+
-+	/*
-+	 * Do of_find_compatible_node() then of_find_device_by_node()
-+	 * once a functional device tree is available
-+	 */
-+	dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
-+	if (!dev_node) {
-+		dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
-+		if (!dev_node)
-+			return;
-+	}
-+
-+	pdev = of_find_device_by_node(dev_node);
-+	if (!pdev)
-+		return;
-+
-+	of_node_get(dev_node);
-+
-+}
-+
-+static int __init caam_sm_test_init(void)
-+{
-+	struct device_node *dev_node;
-+	struct platform_device *pdev;
-+	int ret;
-+
-+	/*
-+	 * Do of_find_compatible_node() then of_find_device_by_node()
-+	 * once a functional device tree is available
-+	 */
-+	dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
-+	if (!dev_node) {
-+		dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
-+		if (!dev_node)
-+			return -ENODEV;
-+	}
-+
-+	pdev = of_find_device_by_node(dev_node);
-+	if (!pdev)
-+		return -ENODEV;
-+
-+	of_node_put(dev_node);
-+
-+	ret = caam_sm_example_init(pdev);
-+	if (ret)
-+		dev_err(&pdev->dev, "SM test failed: %d\n", ret);
-+	else
-+		dev_info(&pdev->dev, "SM test passed\n");
-+
-+	return ret;
-+}
-+
-+
-+/* Module-based initialization needs to wait for dev tree */
-+#ifdef CONFIG_OF
-+module_init(caam_sm_test_init);
-+module_exit(caam_sm_example_shutdown);
-+
-+MODULE_LICENSE("Dual BSD/GPL");
-+MODULE_DESCRIPTION("FSL CAAM Black Key Usage Example");
-+MODULE_AUTHOR("Freescale Semiconductor - NMSG/MAD");
-+#endif
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0021-MLK-19801-1-crypto-caam-add-tag-functionality.patch b/target/linux/layerscape/patches-5.4/804-crypto-0021-MLK-19801-1-crypto-caam-add-tag-functionality.patch
deleted file mode 100644
index 11d267354d..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0021-MLK-19801-1-crypto-caam-add-tag-functionality.patch
+++ /dev/null
@@ -1,439 +0,0 @@
-From b2fb5441c4613465e0c8f9203cdec4f8083d2fdd Mon Sep 17 00:00:00 2001
-From: Franck LENORMAND <franck.lenormand@nxp.com>
-Date: Fri, 5 Oct 2018 16:08:25 +0200
-Subject: [PATCH] MLK-19801-1 crypto: caam - add tag functionality
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add functions to tag an object with metadata(configuration).
-
-It is possible to:
- - create metadata:
-	- init_tag_object_header
-	- init_blackey_conf
-	- set_tag_object_conf
- - retrieve metadata:
-	- get_tag_object_conf
-	- get_blackey_conf
-
-The API expects an object to be a space a memory
-with an address and a size.
-
-The implementation of the tag is currently exposed
-but users shouldn't access it directly, they should
-use the functions provided.
-
-Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
-(cherry picked from commit ebbb132da8e7f9de7f3d375eff8d87f684feb1eb)
-Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
-(cherry picked from commit 8b6f6b4474be33ee271dfe2cce79f9f6335733aa)
-
--make tag functionality depend on JR
--change commit headline prefix
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/Kconfig      |  10 ++
- drivers/crypto/caam/Makefile     |   1 +
- drivers/crypto/caam/tag_object.c | 260 +++++++++++++++++++++++++++++++++++++++
- drivers/crypto/caam/tag_object.h | 100 +++++++++++++++
- 4 files changed, 371 insertions(+)
- create mode 100644 drivers/crypto/caam/tag_object.c
- create mode 100644 drivers/crypto/caam/tag_object.h
-
---- a/drivers/crypto/caam/Kconfig
-+++ b/drivers/crypto/caam/Kconfig
-@@ -148,6 +148,16 @@ config CRYPTO_DEV_FSL_CAAM_RNG_API
- 	  Selecting this will register the SEC4 hardware rng to
- 	  the hw_random API for suppying the kernel entropy pool.
- 
-+config CRYPTO_DEV_FSL_CAAM_TK_API
-+	bool "Register tagged key cryptography implementations with Crypto API"
-+	depends on CRYPTO_DEV_FSL_CAAM_CRYPTO_API
-+	help
-+	  Selecting this will register algorithms supporting tagged
-+	  key.
-+
-+	  Tagged key are keys that contains metadata indicating what
-+	  they are and how to handle them.
-+
- config CRYPTO_DEV_FSL_CAAM_RNG_TEST
- 	bool "Test caam rng"
- 	depends on CRYPTO_DEV_FSL_CAAM_RNG_API
---- a/drivers/crypto/caam/Makefile
-+++ b/drivers/crypto/caam/Makefile
-@@ -24,6 +24,7 @@ caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_PKC
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_SM) += sm_store.o
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_SM_TEST) += sm_test.o
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_SECVIO) += secvio.o
-+caam-jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API) += tag_object.o
- 
- caam-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += qi.o
- ifneq ($(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI),)
---- /dev/null
-+++ b/drivers/crypto/caam/tag_object.c
-@@ -0,0 +1,260 @@
-+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
-+/*
-+ * Copyright 2018-2019 NXP
-+ */
-+
-+#include <linux/export.h>
-+#include <linux/string.h>
-+#include <linux/errno.h>
-+
-+#include "tag_object.h"
-+#include "desc.h"
-+
-+/*
-+ * Magic number to clearly identify the structure is for us
-+ * 0x54 = 'T'
-+ * 0x61 = 'a'
-+ * 0x67 = 'g'
-+ * 0x4f = 'O'
-+ */
-+#define TAG_OBJECT_MAGIC 0x5461674f
-+
-+/**
-+ * struct tagged_object - Structure representing a tagged object
-+ * @tag : The configuration of the data
-+ * @object : The object
-+ */
-+struct tagged_object {
-+	struct tag_object_conf tag;
-+	char object;
-+};
-+
-+/**
-+ * is_bk_type() - Determines if black key type.
-+ * @type: The type
-+ *
-+ * Return: True if black key type, False otherwise.
-+ */
-+static bool is_bk_type(enum tag_type type)
-+{
-+	return (type == TAG_TYPE_BLACK_KEY_ECB) ||
-+		(type == TAG_TYPE_BLACK_KEY_ECB_TRUSTED) ||
-+		(type == TAG_TYPE_BLACK_KEY_CCM) ||
-+		(type == TAG_TYPE_BLACK_KEY_CCM_TRUSTED);
-+}
-+
-+/**
-+ * is_bk_conf() - Determines if black key conf.
-+ * @tag_obj_conf : The tag object conf
-+ *
-+ * Return: True if black key conf, False otherwise.
-+ */
-+bool is_bk_conf(const struct tag_object_conf *tag_obj_conf)
-+{
-+	return is_bk_type(tag_obj_conf->header.type);
-+}
-+EXPORT_SYMBOL(is_bk_conf);
-+
-+/**
-+ * get_bk_conf() - Gets the block conf.
-+ * @tag_obj_conf : The tag object conf
-+ *
-+ * Return: The block conf.
-+ */
-+const struct blackey_conf *get_bk_conf(const struct tag_object_conf *tag_obj_conf)
-+{
-+	return &tag_obj_conf->conf.bk_conf;
-+}
-+
-+/**
-+ * get_tag_object_overhead() - Gets the tag object overhead.
-+ *
-+ * Return: The tag object overhead.
-+ */
-+size_t get_tag_object_overhead(void)
-+{
-+	return TAG_OVERHEAD;
-+}
-+EXPORT_SYMBOL(get_tag_object_overhead);
-+
-+/**
-+ * is_valid_type() - Determines if valid type.
-+ * @type : The type
-+ *
-+ * Return: True if valid type, False otherwise.
-+ */
-+bool is_valid_type(enum tag_type type)
-+{
-+	return (type > TAG_TYPE_NOT_SUPPORTED) && (type < NB_TAG_TYPE);
-+}
-+EXPORT_SYMBOL(is_valid_type);
-+
-+/**
-+ * is_valid_header() - Determines if valid header.
-+ * @header : The header
-+ *
-+ * Return: True if valid tag object conf, False otherwise.
-+ */
-+static bool is_valid_header(const struct conf_header *header)
-+{
-+	bool valid = header->_magic_number == TAG_OBJECT_MAGIC;
-+
-+	valid = valid && is_valid_type(header->type);
-+
-+	return valid;
-+}
-+
-+/**
-+ * is_valid_tag_object_conf() - Determines if valid tag object conf.
-+ * @tag_obj_conf : The tag object conf
-+ *
-+ * Return: True if valid header, False otherwise.
-+ */
-+bool is_valid_tag_object_conf(const struct tag_object_conf *tag_obj_conf)
-+{
-+	bool valid = true;
-+
-+	valid = is_valid_header(&tag_obj_conf->header);
-+
-+	return valid;
-+}
-+EXPORT_SYMBOL(is_valid_tag_object_conf);
-+
-+/**
-+ * get_tag_object_conf() - Gets a pointer on the tag object conf.
-+ * @tag_obj_conf : The tag object conf
-+ * @buffer : The buffer
-+ * @size : The size
-+ *
-+ * Return: 0 if success, else error code
-+ */
-+int get_tag_object_conf(void *buffer, size_t size,
-+			struct tag_object_conf **tag_obj_conf)
-+{
-+	bool is_valid;
-+	struct tagged_object *tago = (struct tagged_object *)buffer;
-+	size_t conf_size = get_tag_object_overhead();
-+
-+	/* Check we can retrieve the conf */
-+	if (size < conf_size)
-+		return -EINVAL;
-+
-+	is_valid = is_valid_tag_object_conf(&tago->tag);
-+
-+	*tag_obj_conf = &tago->tag;
-+
-+	return (is_valid) ? 0 : -EINVAL;
-+}
-+EXPORT_SYMBOL(get_tag_object_conf);
-+
-+/**
-+ * init_tag_object_header() - Initialize the tag object header
-+ * @conf_header : The configuration header
-+ * @type : The type
-+ *
-+ * It initialize the header structure
-+ */
-+void init_tag_object_header(struct conf_header *conf_header,
-+			    enum tag_type type)
-+{
-+	conf_header->_magic_number = TAG_OBJECT_MAGIC;
-+	conf_header->type = type;
-+}
-+EXPORT_SYMBOL(init_tag_object_header);
-+
-+/**
-+ * set_tag_object_conf() - Sets the tag object conf.
-+ * @tag_obj_conf : The tag object conf
-+ * @buffer : The buffer
-+ * @obj_size : The object size
-+ * @to_size : The tagged object size
-+ *
-+ * Return: 0 if success, else error code
-+ */
-+int set_tag_object_conf(const struct tag_object_conf *tag_obj_conf,
-+			void *buffer, size_t obj_size, u32 *to_size)
-+{
-+	struct tagged_object *tago = buffer;
-+	size_t conf_size = get_tag_object_overhead();
-+	size_t req_size = obj_size + conf_size;
-+
-+	/* Check we can set the conf */
-+	if (*to_size < req_size) {
-+		*to_size = req_size;
-+		return -EINVAL;
-+	}
-+
-+	/* Move the object */
-+	memmove(&tago->object, buffer, obj_size);
-+
-+	/* Copy the tag */
-+	memcpy(&tago->tag, tag_obj_conf, conf_size);
-+
-+	*to_size = req_size;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(set_tag_object_conf);
-+
-+/**
-+ * init_blackey_conf() - Initialize the black key configuration
-+ * @blackey_conf : The blackey conf
-+ * @len : The length
-+ * @ccm : The ccm
-+ * @tk : The trusted key
-+ *
-+ * It initialize the black key configuration structure
-+ */
-+void init_blackey_conf(struct blackey_conf *blackey_conf,
-+		       size_t len, bool ccm, bool tk)
-+{
-+	blackey_conf->real_len = len;
-+	blackey_conf->load = KEY_ENC
-+				| ((ccm) ? KEY_EKT : 0)
-+				| ((tk) ? KEY_TK : 0);
-+}
-+EXPORT_SYMBOL(init_blackey_conf);
-+
-+/**
-+ * get_blackey_conf() - Get the black key configuration
-+ * @blackey_conf : The blackey conf
-+ * @real_len : The real length
-+ * @load_param : The load parameter
-+ *
-+ * It retrieve the black key configuration
-+ */
-+void get_blackey_conf(const struct blackey_conf *blackey_conf,
-+		      u32 *real_len, u32 *load_param)
-+{
-+	*real_len = blackey_conf->real_len;
-+	*load_param = blackey_conf->load;
-+}
-+EXPORT_SYMBOL(get_blackey_conf);
-+
-+/**
-+ * get_tagged_data() - Get a pointer on the data and the size
-+ * @tagged_object : Pointer on the tagged object
-+ * @tagged_object_size : tagged object size in bytes
-+ * @data : Pointer on the data
-+ * @data_size : data size in bytes
-+ *
-+ * Return: 0 if success, else error code
-+ */
-+int get_tagged_data(void *tagged_object, size_t tagged_object_size,
-+		    void **data, u32 *data_size)
-+{
-+	struct tagged_object *tago =
-+		(struct tagged_object *)tagged_object;
-+	size_t conf_size = get_tag_object_overhead();
-+
-+	/* Check we can retrieve the object */
-+	if (tagged_object_size < conf_size)
-+		return -EINVAL;
-+
-+	/* Retrieve the object */
-+	*data = &tago->object;
-+	*data_size = tagged_object_size - conf_size;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(get_tagged_data);
---- /dev/null
-+++ b/drivers/crypto/caam/tag_object.h
-@@ -0,0 +1,100 @@
-+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
-+/*
-+ * Copyright 2018-2019 NXP
-+ */
-+
-+#ifndef _TAG_OBJECT_H_
-+#define _TAG_OBJECT_H_
-+
-+#include <linux/types.h>
-+
-+#define TAG_MIN_SIZE (2 * sizeof(struct conf_header))
-+#define TAG_OVERHEAD sizeof(struct tag_object_conf)
-+
-+/**
-+ * enum tag_type - Type of data represented by the tag
-+ */
-+enum tag_type {
-+	/** @TAG_TYPE_NOT_SUPPORTED: The type is not supported */
-+	TAG_TYPE_NOT_SUPPORTED = 0,
-+
-+	/* Type that passes is_tag_type_valid() */
-+	/** @TAG_TYPE_BLACK_KEY_ECB: Black key encrypted with ECB */
-+	TAG_TYPE_BLACK_KEY_ECB,
-+	/**
-+	 * @TAG_TYPE_BLACK_KEY_ECB_TRUSTED: ECB Black key created by trusted
-+	 * descriptor
-+	 */
-+	TAG_TYPE_BLACK_KEY_ECB_TRUSTED,
-+	/** @TAG_TYPE_BLACK_KEY_CCM: Black key encrypted with CCM */
-+	TAG_TYPE_BLACK_KEY_CCM,
-+	/**
-+	 * @TAG_TYPE_BLACK_KEY_CCM_TRUSTED: CCM Black key created by trusted
-+	 * descriptor
-+	 */
-+	TAG_TYPE_BLACK_KEY_CCM_TRUSTED,
-+
-+	/** @NB_TAG_TYPE: Number of type of tag */
-+	NB_TAG_TYPE,
-+};
-+
-+/**
-+ * struct conf_header - Common struture holding the type of data and the magic
-+ * number
-+ * @_magic_number : A magic number to identify the structure
-+ * @type : The type of data contained
-+ */
-+struct conf_header {
-+	u32 _magic_number;
-+	u32 type;
-+};
-+
-+/**
-+ * struct blackey_conf - Configuration for a black key
-+ * @load : Load parameter for CAAM
-+ * @real_len : Length of the key before encryption
-+ */
-+struct blackey_conf {
-+	u32 load;
-+	u32 real_len;
-+};
-+
-+/**
-+ * struct tag_object_conf - Common structure which is the tag applied to data
-+ * @header : Part of the data initialized with common function
-+ * :c:func:`init_tag_object_header`
-+ * @conf : Configuration data about the object tagged, initialized with
-+ * specific function
-+ */
-+struct tag_object_conf {
-+	struct conf_header header;
-+	union {
-+		struct blackey_conf bk_conf;
-+	} conf;
-+};
-+
-+bool is_bk_conf(const struct tag_object_conf *tag_obj_conf);
-+
-+bool is_valid_tag_object_conf(const struct tag_object_conf *tag_obj_conf);
-+
-+void init_tag_object_header(struct conf_header *conf_header,
-+			    enum tag_type type);
-+
-+int get_tag_object_conf(void *buffer, size_t buffer_size,
-+			struct tag_object_conf **tag_obj_conf);
-+
-+int set_tag_object_conf(const struct tag_object_conf *tag_obj_conf,
-+			void *buffer, size_t obj_size, u32 *to_size);
-+
-+size_t get_tag_object_overhead(void);
-+
-+void get_blackey_conf(const struct blackey_conf *blackey_conf,
-+		      u32 *real_len, u32 *load_param);
-+
-+void init_blackey_conf(struct blackey_conf *blackey_conf,
-+		       size_t len, bool ccm, bool tk);
-+
-+int get_tagged_data(void *buffer, size_t buffer_size,
-+		    void **data, u32 *data_size);
-+
-+#endif /* _TAG_OBJECT_H_ */
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0022-MLK-19801-2-crypto-caam-add-support-of-tagged-keys-i.patch b/target/linux/layerscape/patches-5.4/804-crypto-0022-MLK-19801-2-crypto-caam-add-support-of-tagged-keys-i.patch
deleted file mode 100644
index 81f2010aba..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0022-MLK-19801-2-crypto-caam-add-support-of-tagged-keys-i.patch
+++ /dev/null
@@ -1,304 +0,0 @@
-From df1b397d7c5e79052fa56d1b256ededcd301a27a Mon Sep 17 00:00:00 2001
-From: Franck LENORMAND <franck.lenormand@nxp.com>
-Date: Fri, 5 Oct 2018 16:41:54 +0200
-Subject: [PATCH] MLK-19801-2 crypto: caam - add support of tagged keys in
- caamalg
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-A tagged key is a key which has been tagged with metadata
-using tag_object.h API.
-
-We add the support for these keys to caamalg.
-
-For each algo of caamalg which supports tagged keys , it is done by:
- - Creating a modified version of the algo
- - Registering the modified version
- - When the modified transform is used, it gets
-   the load parameter of the key.
-
-Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
-(cherry picked from commit 88dee97d985890dbf37cafa7934c476d0ecfd0b3)
-(Vipul: Fixed merge conflicts)
-Conflicts:
-	drivers/crypto/caam/caamalg.c
-Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
-(cherry picked from commit 5adebac40a7a8065c074f4a69f4ad760c67233f5)
-
--port from ablkcipher to current skcipher implementation
--since in linux-imx true key_inline was always true: a. simplify
-the descriptors and b. use key_cmd_opt to differentiate b/w tk and non-tk
-cases
--change commit headline prefix
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/Makefile       |  3 +-
- drivers/crypto/caam/caamalg.c      | 91 +++++++++++++++++++++++++++++++++++++-
- drivers/crypto/caam/caamalg_desc.c | 20 +++++++--
- drivers/crypto/caam/desc_constr.h  |  4 ++
- drivers/crypto/caam/tag_object.c   |  6 +--
- drivers/crypto/caam/tag_object.h   |  6 +--
- 6 files changed, 118 insertions(+), 12 deletions(-)
-
---- a/drivers/crypto/caam/Makefile
-+++ b/drivers/crypto/caam/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_
- obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC) += caamhash_desc.o
- 
- caam-y := ctrl.o
-+caam-$(CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API) += tag_object.o
- caam_jr-y := jr.o key_gen.o
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API) += caamalg.o
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += caamalg_qi.o
-@@ -24,7 +25,7 @@ caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_PKC
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_SM) += sm_store.o
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_SM_TEST) += sm_test.o
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_SECVIO) += secvio.o
--caam-jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API) += tag_object.o
-+#caam-jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API) += tag_object.o
- 
- caam-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += qi.o
- ifneq ($(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI),)
---- a/drivers/crypto/caam/caamalg.c
-+++ b/drivers/crypto/caam/caamalg.c
-@@ -57,6 +57,10 @@
- #include "key_gen.h"
- #include "caamalg_desc.h"
- 
-+#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API
-+#include "tag_object.h"
-+#endif /* CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API */
-+
- /*
-  * crypto alg
-  */
-@@ -83,6 +87,7 @@ struct caam_alg_entry {
- 	bool rfc3686;
- 	bool geniv;
- 	bool nodkp;
-+	bool support_tagged_key;
- };
- 
- struct caam_aead_alg {
-@@ -739,6 +744,44 @@ static int skcipher_setkey(struct crypto
- 	ctx->cdata.key_virt = key;
- 	ctx->cdata.key_inline = true;
- 
-+#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API
-+	/*
-+	 * Check if the key is not in plaintext format
-+	 */
-+	if (alg->caam.support_tagged_key) {
-+		struct tag_object_conf *tagged_key_conf;
-+		int ret;
-+
-+		/* Get the configuration */
-+		ret = get_tag_object_conf(ctx->cdata.key_virt,
-+					  ctx->cdata.keylen, &tagged_key_conf);
-+		if (ret) {
-+			dev_err(jrdev,
-+				"caam algorithms can't process tagged key\n");
-+			return ret;
-+		}
-+
-+		/* Only support black key */
-+		if (!is_bk_conf(tagged_key_conf)) {
-+			dev_err(jrdev,
-+				"The tagged key provided is not a black key\n");
-+			return -EINVAL;
-+		}
-+
-+		get_blackey_conf(&tagged_key_conf->conf.bk_conf,
-+				 &ctx->cdata.key_real_len,
-+				 &ctx->cdata.key_cmd_opt);
-+
-+		ret = get_tagged_data(ctx->cdata.key_virt, ctx->cdata.keylen,
-+				      &ctx->cdata.key_virt, &ctx->cdata.keylen);
-+		if (ret) {
-+			dev_err(jrdev,
-+				"caam algorithms wrong data from tagged key\n");
-+			return ret;
-+		}
-+	}
-+#endif /* CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API */
-+
- 	/* skcipher_encrypt shared descriptor */
- 	desc = ctx->sh_desc_enc;
- 	cnstr_shdsc_skcipher_encap(desc, &ctx->cdata, ivsize, is_rfc3686,
-@@ -818,6 +861,14 @@ static int ctr_skcipher_setkey(struct cr
- 	return skcipher_setkey(skcipher, key, keylen, ctx1_iv_off);
- }
- 
-+#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API
-+static int tk_skcipher_setkey(struct crypto_skcipher *skcipher,
-+				const u8 *key, unsigned int keylen)
-+{
-+	return skcipher_setkey(skcipher, key, keylen, 0);
-+}
-+#endif /* CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API */
-+
- static int des_skcipher_setkey(struct crypto_skcipher *skcipher,
- 			       const u8 *key, unsigned int keylen)
- {
-@@ -1918,6 +1969,25 @@ static struct caam_skcipher_alg driver_a
- 		},
- 		.caam.class1_alg_type = OP_ALG_ALGSEL_AES | OP_ALG_AAI_CBC,
- 	},
-+#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API
-+	{
-+		.skcipher = {
-+			.base = {
-+				.cra_name = "tk(cbc(aes))",
-+				.cra_driver_name = "tk-cbc-aes-caam",
-+				.cra_blocksize = AES_BLOCK_SIZE,
-+			},
-+			.setkey = tk_skcipher_setkey,
-+			.encrypt = skcipher_encrypt,
-+			.decrypt = skcipher_decrypt,
-+			.min_keysize = TAG_MIN_SIZE,
-+			.max_keysize = CAAM_MAX_KEY_SIZE,
-+			.ivsize = AES_BLOCK_SIZE,
-+		},
-+		.caam.class1_alg_type = OP_ALG_ALGSEL_AES | OP_ALG_AAI_CBC,
-+		.caam.support_tagged_key = true,
-+	},
-+#endif /* CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API */
- 	{
- 		.skcipher = {
- 			.base = {
-@@ -2037,6 +2107,24 @@ static struct caam_skcipher_alg driver_a
- 		},
- 		.caam.class1_alg_type = OP_ALG_ALGSEL_AES | OP_ALG_AAI_ECB,
- 	},
-+#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API
-+	{
-+		.skcipher = {
-+			.base = {
-+				.cra_name = "tk(ecb(aes))",
-+				.cra_driver_name = "tk-ecb-aes-caam",
-+				.cra_blocksize = AES_BLOCK_SIZE,
-+			},
-+			.setkey = tk_skcipher_setkey,
-+			.encrypt = skcipher_encrypt,
-+			.decrypt = skcipher_decrypt,
-+			.min_keysize = TAG_MIN_SIZE,
-+			.max_keysize = CAAM_MAX_KEY_SIZE,
-+		},
-+		.caam.class1_alg_type = OP_ALG_ALGSEL_AES | OP_ALG_AAI_ECB,
-+		.caam.support_tagged_key = true,
-+	},
-+#endif /* CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API */
- 	{
- 		.skcipher = {
- 			.base = {
-@@ -3486,7 +3574,8 @@ static void caam_skcipher_alg_init(struc
- 	struct skcipher_alg *alg = &t_alg->skcipher;
- 
- 	alg->base.cra_module = THIS_MODULE;
--	alg->base.cra_priority = CAAM_CRA_PRIORITY;
-+	alg->base.cra_priority =
-+		t_alg->caam.support_tagged_key ? 1 : CAAM_CRA_PRIORITY;
- 	alg->base.cra_ctxsize = sizeof(struct caam_ctx);
- 	alg->base.cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_KERN_DRIVER_ONLY;
- 
---- a/drivers/crypto/caam/caamalg_desc.c
-+++ b/drivers/crypto/caam/caamalg_desc.c
-@@ -1389,8 +1389,14 @@ void cnstr_shdsc_skcipher_encap(u32 * co
- 				   JUMP_COND_SHRD);
- 
- 	/* Load class1 key only */
--	append_key_as_imm(desc, cdata->key_virt, cdata->keylen,
--			  cdata->keylen, CLASS_1 | KEY_DEST_CLASS_REG);
-+	if (IS_ENABLED(CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API) &&
-+	    cdata->key_cmd_opt)
-+		append_key_as_imm(desc, cdata->key_virt, cdata->keylen,
-+				  cdata->key_real_len, CLASS_1 |
-+				  KEY_DEST_CLASS_REG | cdata->key_cmd_opt);
-+	else
-+		append_key_as_imm(desc, cdata->key_virt, cdata->keylen,
-+				  cdata->keylen, CLASS_1 | KEY_DEST_CLASS_REG);
- 
- 	/* Load nonce into CONTEXT1 reg */
- 	if (is_rfc3686) {
-@@ -1464,8 +1470,14 @@ void cnstr_shdsc_skcipher_decap(u32 * co
- 				   JUMP_COND_SHRD);
- 
- 	/* Load class1 key only */
--	append_key_as_imm(desc, cdata->key_virt, cdata->keylen,
--			  cdata->keylen, CLASS_1 | KEY_DEST_CLASS_REG);
-+	if (IS_ENABLED(CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API) &&
-+	    cdata->key_cmd_opt)
-+		append_key_as_imm(desc, cdata->key_virt, cdata->keylen,
-+				  cdata->key_real_len, CLASS_1 |
-+				  KEY_DEST_CLASS_REG | cdata->key_cmd_opt);
-+	else
-+		append_key_as_imm(desc, cdata->key_virt, cdata->keylen,
-+				  cdata->keylen, CLASS_1 | KEY_DEST_CLASS_REG);
- 
- 	/* Load nonce into CONTEXT1 reg */
- 	if (is_rfc3686) {
---- a/drivers/crypto/caam/desc_constr.h
-+++ b/drivers/crypto/caam/desc_constr.h
-@@ -500,6 +500,8 @@ do { \
-  * @key_virt: virtual address where algorithm key resides
-  * @key_inline: true - key can be inlined in the descriptor; false - key is
-  *              referenced by the descriptor
-+ * @key_real_len: size of the key to be loaded by the CAAM
-+ * @key_cmd_opt: optional parameters for KEY command
-  */
- struct alginfo {
- 	u32 algtype;
-@@ -508,6 +510,8 @@ struct alginfo {
- 	dma_addr_t key_dma;
- 	const void *key_virt;
- 	bool key_inline;
-+	u32 key_real_len;
-+	u32 key_cmd_opt;
- };
- 
- /**
---- a/drivers/crypto/caam/tag_object.c
-+++ b/drivers/crypto/caam/tag_object.c
-@@ -128,7 +128,7 @@ EXPORT_SYMBOL(is_valid_tag_object_conf);
-  *
-  * Return: 0 if success, else error code
-  */
--int get_tag_object_conf(void *buffer, size_t size,
-+int get_tag_object_conf(const void *buffer, size_t size,
- 			struct tag_object_conf **tag_obj_conf)
- {
- 	bool is_valid;
-@@ -240,8 +240,8 @@ EXPORT_SYMBOL(get_blackey_conf);
-  *
-  * Return: 0 if success, else error code
-  */
--int get_tagged_data(void *tagged_object, size_t tagged_object_size,
--		    void **data, u32 *data_size)
-+int get_tagged_data(const void *tagged_object, size_t tagged_object_size,
-+		    const void **data, u32 *data_size)
- {
- 	struct tagged_object *tago =
- 		(struct tagged_object *)tagged_object;
---- a/drivers/crypto/caam/tag_object.h
-+++ b/drivers/crypto/caam/tag_object.h
-@@ -80,7 +80,7 @@ bool is_valid_tag_object_conf(const stru
- void init_tag_object_header(struct conf_header *conf_header,
- 			    enum tag_type type);
- 
--int get_tag_object_conf(void *buffer, size_t buffer_size,
-+int get_tag_object_conf(const void *buffer, size_t buffer_size,
- 			struct tag_object_conf **tag_obj_conf);
- 
- int set_tag_object_conf(const struct tag_object_conf *tag_obj_conf,
-@@ -94,7 +94,7 @@ void get_blackey_conf(const struct black
- void init_blackey_conf(struct blackey_conf *blackey_conf,
- 		       size_t len, bool ccm, bool tk);
- 
--int get_tagged_data(void *buffer, size_t buffer_size,
--		    void **data, u32 *data_size);
-+int get_tagged_data(const void *buffer, size_t buffer_size,
-+		    const void **data, u32 *data_size);
- 
- #endif /* _TAG_OBJECT_H_ */
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0023-MLK-10036-crypto-caam-add-support-for-DSM-with-Mega-.patch b/target/linux/layerscape/patches-5.4/804-crypto-0023-MLK-10036-crypto-caam-add-support-for-DSM-with-Mega-.patch
deleted file mode 100644
index 883cd42d09..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0023-MLK-10036-crypto-caam-add-support-for-DSM-with-Mega-.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 1ffdfbcd42dbb87f2841e45c0719a3fbcb2fe926 Mon Sep 17 00:00:00 2001
-From: Victoria Milhoan <vicki.milhoan@freescale.com>
-Date: Thu, 18 Dec 2014 14:06:50 -0700
-Subject: [PATCH] MLK-10036 crypto: caam - add support for DSM with Mega/Fast
- mix on
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch allows CAAM to be enabled as a wakeup source for the
-Mega/Fast mix domain. If CAAM is enabled as a wakeup source, it
-will continue to be powered on across Deep Sleep Mode (DSM). This
-allows CAAM to be functional after the system resumes from DSM.
-
-Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
-(cherry picked from commit 290744e3b40a563319324e234fa5a65b49fd4d82)
-Signed-off-by: Dan Douglass <dan.douglass@freescale.com>
-Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
-(cherry picked from commit 0bf9c6f84f1d74d9e6d9384c4b11bbdf9301c94e)
-
-Changed commit headline prefix.
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/jr.c | 33 +++++++++++++++++++++++++++++++++
- 1 file changed, 33 insertions(+)
-
---- a/drivers/crypto/caam/jr.c
-+++ b/drivers/crypto/caam/jr.c
-@@ -561,11 +561,41 @@ static int caam_jr_probe(struct platform
- 
- 	atomic_set(&jrpriv->tfm_count, 0);
- 
-+	device_init_wakeup(&pdev->dev, 1);
-+	device_set_wakeup_enable(&pdev->dev, false);
-+
- 	register_algs(jrdev->parent);
- 
- 	return 0;
- }
- 
-+#ifdef CONFIG_PM
-+static int caam_jr_suspend(struct device *dev)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct caam_drv_private_jr *jrpriv = platform_get_drvdata(pdev);
-+
-+	if (device_may_wakeup(&pdev->dev))
-+		enable_irq_wake(jrpriv->irq);
-+
-+	return 0;
-+}
-+
-+static int caam_jr_resume(struct device *dev)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct caam_drv_private_jr *jrpriv = platform_get_drvdata(pdev);
-+
-+	if (device_may_wakeup(&pdev->dev))
-+		disable_irq_wake(jrpriv->irq);
-+
-+	return 0;
-+}
-+
-+static SIMPLE_DEV_PM_OPS(caam_jr_pm_ops, caam_jr_suspend,
-+			 caam_jr_resume);
-+#endif
-+
- static const struct of_device_id caam_jr_match[] = {
- 	{
- 		.compatible = "fsl,sec-v4.0-job-ring",
-@@ -581,6 +611,9 @@ static struct platform_driver caam_jr_dr
- 	.driver = {
- 		.name = "caam_jr",
- 		.of_match_table = caam_jr_match,
-+#ifdef CONFIG_PM
-+		.pm = &caam_jr_pm_ops,
-+#endif
- 	},
- 	.probe       = caam_jr_probe,
- 	.remove      = caam_jr_remove,
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0024-MLK-19449-crypto-caam-Change-structure-type-represen.patch b/target/linux/layerscape/patches-5.4/804-crypto-0024-MLK-19449-crypto-caam-Change-structure-type-represen.patch
deleted file mode 100644
index 2914f010a4..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0024-MLK-19449-crypto-caam-Change-structure-type-represen.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 18c56f8bced33c4d3d18dd10d2648def4291e6ea Mon Sep 17 00:00:00 2001
-From: Franck LENORMAND <franck.lenormand@nxp.com>
-Date: Tue, 5 Mar 2019 14:20:34 +0100
-Subject: [PATCH] MLK-19449 crypto: caam - Change structure type representing
- DECO MID
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The structure partid is not suitable to represent the DECO MID register.
-
-This patch replace partid by masterid which is more appropriate.
-
-Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
-Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
-(cherry picked from commit 2d8dab735757dae8efb35bb0371970a7d27e98be)
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/regs.h | 8 +-------
- 1 file changed, 1 insertion(+), 7 deletions(-)
-
---- a/drivers/crypto/caam/regs.h
-+++ b/drivers/crypto/caam/regs.h
-@@ -521,12 +521,6 @@ struct masterid {
- 	u32 liodn_ls;	/* LIODN for non-sequence and seq access */
- };
- 
--/* Partition ID for DMA configuration */
--struct partid {
--	u32 rsvd1;
--	u32 pidr;	/* partition ID, DECO */
--};
--
- /* RNGB test mode (replicated twice in some configurations) */
- /* Padded out to 0x100 */
- struct rngtst {
-@@ -640,7 +634,7 @@ struct caam_ctrl {
- 	u32 deco_rsr;			/* DECORSR - Deco Request Source */
- 	u32 rsvd11;
- 	u32 deco_rq;			/* DECORR - DECO Request */
--	struct partid deco_mid[5];	/* DECOxLIODNR - 1 per DECO */
-+	struct masterid deco_mid[5];	/* DECOxLIODNR - 1 per DECO */
- 	u32 rsvd5[22];
- 
- 	/* DECO Availability/Reset Section			120-3ff */
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0025-crypto-caam-qi2-add-unused-dpseci-API.patch b/target/linux/layerscape/patches-5.4/804-crypto-0025-crypto-caam-qi2-add-unused-dpseci-API.patch
deleted file mode 100644
index 269d723524..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0025-crypto-caam-qi2-add-unused-dpseci-API.patch
+++ /dev/null
@@ -1,561 +0,0 @@
-From f79915995e8fe4f2d11043fe4cab4b579e5cf1de Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Horia=20Geant=C4=83?= <horia.geanta@nxp.com>
-Date: Wed, 10 Oct 2018 16:06:11 +0300
-Subject: [PATCH] crypto: caam/qi2 - add (unused) dpseci API
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-During driver upstreaming all unused dpseci API was trimmed down.
-Add the API back to be in sync with files provided by MC f/w release.
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/dpseci.c     | 330 ++++++++++++++++++++++++++++++++++++++-
- drivers/crypto/caam/dpseci.h     |  50 ++++++
- drivers/crypto/caam/dpseci_cmd.h |  59 +++++++
- 3 files changed, 437 insertions(+), 2 deletions(-)
-
---- a/drivers/crypto/caam/dpseci.c
-+++ b/drivers/crypto/caam/dpseci.c
-@@ -16,8 +16,8 @@
-  * @token:	Returned token; use in subsequent API calls
-  *
-  * This function can be used to open a control session for an already created
-- * object; an object may have been declared statically in the DPL
-- * or created dynamically.
-+ * object; an object may have been declared in the DPL or by calling the
-+ * dpseci_create() function.
-  * This function returns a unique authentication token, associated with the
-  * specific object ID and the specific MC portal; this token must be used in all
-  * subsequent commands for this specific object.
-@@ -67,6 +67,85 @@ int dpseci_close(struct fsl_mc_io *mc_io
- }
- 
- /**
-+ * dpseci_create() - Create the DPSECI object
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @dprc_token:	Parent container token; '0' for default container
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @cfg:	Configuration structure
-+ * @obj_id:	returned object id
-+ *
-+ * Create the DPSECI object, allocate required resources and perform required
-+ * initialization.
-+ *
-+ * The object can be created either by declaring it in the DPL file, or by
-+ * calling this function.
-+ *
-+ * The function accepts an authentication token of a parent container that this
-+ * object should be assigned to. The token can be '0' so the object will be
-+ * assigned to the default container.
-+ * The newly created object can be opened with the returned object id and using
-+ * the container's associated tokens and MC portals.
-+ *
-+ * Return:	'0' on success, error code otherwise
-+ */
-+int dpseci_create(struct fsl_mc_io *mc_io, u16 dprc_token, u32 cmd_flags,
-+		  const struct dpseci_cfg *cfg, u32 *obj_id)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	struct dpseci_cmd_create *cmd_params;
-+	int i, err;
-+
-+	cmd.header = mc_encode_cmd_header(DPSECI_CMDID_CREATE,
-+					  cmd_flags,
-+					  dprc_token);
-+	cmd_params = (struct dpseci_cmd_create *)cmd.params;
-+	for (i = 0; i < 8; i++)
-+		cmd_params->priorities[i] = cfg->priorities[i];
-+	for (i = 0; i < 8; i++)
-+		cmd_params->priorities2[i] = cfg->priorities[8 + i];
-+	cmd_params->num_tx_queues = cfg->num_tx_queues;
-+	cmd_params->num_rx_queues = cfg->num_rx_queues;
-+	cmd_params->options = cpu_to_le32(cfg->options);
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	*obj_id = mc_cmd_read_object_id(&cmd);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpseci_destroy() - Destroy the DPSECI object and release all its resources
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @dprc_token: Parent container token; '0' for default container
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @object_id:	The object id; it must be a valid id within the container that
-+ *		created this object
-+ *
-+ * The function accepts the authentication token of the parent container that
-+ * created the object (not the one that currently owns the object). The object
-+ * is searched within parent using the provided 'object_id'.
-+ * All tokens to the object must be closed before calling destroy.
-+ *
-+ * Return:	'0' on success, error code otherwise
-+ */
-+int dpseci_destroy(struct fsl_mc_io *mc_io, u16 dprc_token, u32 cmd_flags,
-+		   u32 object_id)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	struct dpseci_cmd_destroy *cmd_params;
-+
-+	cmd.header = mc_encode_cmd_header(DPSECI_CMDID_DESTROY,
-+					  cmd_flags,
-+					  dprc_token);
-+	cmd_params = (struct dpseci_cmd_destroy *)cmd.params;
-+	cmd_params->object_id = cpu_to_le32(object_id);
-+
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-  * dpseci_enable() - Enable the DPSECI, allow sending and receiving frames
-  * @mc_io:	Pointer to MC portal's I/O object
-  * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-@@ -133,6 +212,217 @@ int dpseci_is_enabled(struct fsl_mc_io *
- }
- 
- /**
-+ * dpseci_reset() - Reset the DPSECI, returns the object to initial state.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPSECI object
-+ *
-+ * Return:	'0' on success, error code otherwise
-+ */
-+int dpseci_reset(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+
-+	cmd.header = mc_encode_cmd_header(DPSECI_CMDID_RESET,
-+					  cmd_flags,
-+					  token);
-+
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpseci_get_irq_enable() - Get overall interrupt state
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPSECI object
-+ * @irq_index:	The interrupt index to configure
-+ * @en:		Returned Interrupt state - enable = 1, disable = 0
-+ *
-+ * Return:	'0' on success, error code otherwise
-+ */
-+int dpseci_get_irq_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			  u8 irq_index, u8 *en)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	struct dpseci_cmd_irq_enable *cmd_params;
-+	struct dpseci_rsp_get_irq_enable *rsp_params;
-+	int err;
-+
-+	cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_IRQ_ENABLE,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpseci_cmd_irq_enable *)cmd.params;
-+	cmd_params->irq_index = irq_index;
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	rsp_params = (struct dpseci_rsp_get_irq_enable *)cmd.params;
-+	*en = rsp_params->enable_state;
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpseci_set_irq_enable() - Set overall interrupt state.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPSECI object
-+ * @irq_index:	The interrupt index to configure
-+ * @en:		Interrupt state - enable = 1, disable = 0
-+ *
-+ * Allows GPP software to control when interrupts are generated.
-+ * Each interrupt can have up to 32 causes. The enable/disable control's the
-+ * overall interrupt state. If the interrupt is disabled no causes will cause
-+ * an interrupt.
-+ *
-+ * Return:	'0' on success, error code otherwise
-+ */
-+int dpseci_set_irq_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			  u8 irq_index, u8 en)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	struct dpseci_cmd_irq_enable *cmd_params;
-+
-+	cmd.header = mc_encode_cmd_header(DPSECI_CMDID_SET_IRQ_ENABLE,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpseci_cmd_irq_enable *)cmd.params;
-+	cmd_params->irq_index = irq_index;
-+	cmd_params->enable_state = en;
-+
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpseci_get_irq_mask() - Get interrupt mask.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPSECI object
-+ * @irq_index:	The interrupt index to configure
-+ * @mask:	Returned event mask to trigger interrupt
-+ *
-+ * Every interrupt can have up to 32 causes and the interrupt model supports
-+ * masking/unmasking each cause independently.
-+ *
-+ * Return:	'0' on success, error code otherwise
-+ */
-+int dpseci_get_irq_mask(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			u8 irq_index, u32 *mask)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	struct dpseci_cmd_irq_mask *cmd_params;
-+	int err;
-+
-+	cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_IRQ_MASK,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpseci_cmd_irq_mask *)cmd.params;
-+	cmd_params->irq_index = irq_index;
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	*mask = le32_to_cpu(cmd_params->mask);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpseci_set_irq_mask() - Set interrupt mask.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPSECI object
-+ * @irq_index:	The interrupt index to configure
-+ * @mask:	event mask to trigger interrupt;
-+ *		each bit:
-+ *			0 = ignore event
-+ *			1 = consider event for asserting IRQ
-+ *
-+ * Every interrupt can have up to 32 causes and the interrupt model supports
-+ * masking/unmasking each cause independently
-+ *
-+ * Return:	'0' on success, error code otherwise
-+ */
-+int dpseci_set_irq_mask(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			u8 irq_index, u32 mask)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	struct dpseci_cmd_irq_mask *cmd_params;
-+
-+	cmd.header = mc_encode_cmd_header(DPSECI_CMDID_SET_IRQ_MASK,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpseci_cmd_irq_mask *)cmd.params;
-+	cmd_params->mask = cpu_to_le32(mask);
-+	cmd_params->irq_index = irq_index;
-+
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpseci_get_irq_status() - Get the current status of any pending interrupts
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPSECI object
-+ * @irq_index:	The interrupt index to configure
-+ * @status:	Returned interrupts status - one bit per cause:
-+ *			0 = no interrupt pending
-+ *			1 = interrupt pending
-+ *
-+ * Return:	'0' on success, error code otherwise
-+ */
-+int dpseci_get_irq_status(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			  u8 irq_index, u32 *status)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	struct dpseci_cmd_irq_status *cmd_params;
-+	int err;
-+
-+	cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_IRQ_STATUS,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpseci_cmd_irq_status *)cmd.params;
-+	cmd_params->status = cpu_to_le32(*status);
-+	cmd_params->irq_index = irq_index;
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	*status = le32_to_cpu(cmd_params->status);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpseci_clear_irq_status() - Clear a pending interrupt's status
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPSECI object
-+ * @irq_index:	The interrupt index to configure
-+ * @status:	bits to clear (W1C) - one bit per cause:
-+ *			0 = don't change
-+ *			1 = clear status bit
-+ *
-+ * Return:	'0' on success, error code otherwise
-+ */
-+int dpseci_clear_irq_status(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			    u8 irq_index, u32 status)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	struct dpseci_cmd_irq_status *cmd_params;
-+
-+	cmd.header = mc_encode_cmd_header(DPSECI_CMDID_CLEAR_IRQ_STATUS,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpseci_cmd_irq_status *)cmd.params;
-+	cmd_params->status = cpu_to_le32(status);
-+	cmd_params->irq_index = irq_index;
-+
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-  * dpseci_get_attributes() - Retrieve DPSECI attributes
-  * @mc_io:	Pointer to MC portal's I/O object
-  * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-@@ -320,6 +610,42 @@ int dpseci_get_sec_attr(struct fsl_mc_io
- 
- 	return 0;
- }
-+
-+/**
-+ * dpseci_get_sec_counters() - Retrieve SEC accelerator counters
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPSECI object
-+ * @counters:	Returned SEC counters
-+ *
-+ * Return:	'0' on success, error code otherwise
-+ */
-+int dpseci_get_sec_counters(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			    struct dpseci_sec_counters *counters)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	struct dpseci_rsp_get_sec_counters *rsp_params;
-+	int err;
-+
-+	cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_SEC_COUNTERS,
-+					  cmd_flags,
-+					  token);
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	rsp_params = (struct dpseci_rsp_get_sec_counters *)cmd.params;
-+	counters->dequeued_requests =
-+		le64_to_cpu(rsp_params->dequeued_requests);
-+	counters->ob_enc_requests = le64_to_cpu(rsp_params->ob_enc_requests);
-+	counters->ib_dec_requests = le64_to_cpu(rsp_params->ib_dec_requests);
-+	counters->ob_enc_bytes = le64_to_cpu(rsp_params->ob_enc_bytes);
-+	counters->ob_prot_bytes = le64_to_cpu(rsp_params->ob_prot_bytes);
-+	counters->ib_dec_bytes = le64_to_cpu(rsp_params->ib_dec_bytes);
-+	counters->ib_valid_bytes = le64_to_cpu(rsp_params->ib_valid_bytes);
-+
-+	return 0;
-+}
- 
- /**
-  * dpseci_get_api_version() - Get Data Path SEC Interface API version
---- a/drivers/crypto/caam/dpseci.h
-+++ b/drivers/crypto/caam/dpseci.h
-@@ -55,6 +55,12 @@ struct dpseci_cfg {
- 	u8 priorities[DPSECI_MAX_QUEUE_NUM];
- };
- 
-+int dpseci_create(struct fsl_mc_io *mc_io, u16 dprc_token, u32 cmd_flags,
-+		  const struct dpseci_cfg *cfg, u32 *obj_id);
-+
-+int dpseci_destroy(struct fsl_mc_io *mc_io, u16 dprc_token, u32 cmd_flags,
-+		   u32 object_id);
-+
- int dpseci_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
- 
- int dpseci_disable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
-@@ -62,6 +68,26 @@ int dpseci_disable(struct fsl_mc_io *mc_
- int dpseci_is_enabled(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
- 		      int *en);
- 
-+int dpseci_reset(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
-+
-+int dpseci_get_irq_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			  u8 irq_index, u8 *en);
-+
-+int dpseci_set_irq_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			  u8 irq_index, u8 en);
-+
-+int dpseci_get_irq_mask(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			u8 irq_index, u32 *mask);
-+
-+int dpseci_set_irq_mask(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			u8 irq_index, u32 mask);
-+
-+int dpseci_get_irq_status(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			  u8 irq_index, u32 *status);
-+
-+int dpseci_clear_irq_status(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			    u8 irq_index, u32 status);
-+
- /**
-  * struct dpseci_attr - Structure representing DPSECI attributes
-  * @id: DPSECI object ID
-@@ -248,6 +274,30 @@ struct dpseci_sec_attr {
- int dpseci_get_sec_attr(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
- 			struct dpseci_sec_attr *attr);
- 
-+/**
-+ * struct dpseci_sec_counters - Structure representing global SEC counters and
-+ *				not per dpseci counters
-+ * @dequeued_requests:	Number of Requests Dequeued
-+ * @ob_enc_requests:	Number of Outbound Encrypt Requests
-+ * @ib_dec_requests:	Number of Inbound Decrypt Requests
-+ * @ob_enc_bytes:	Number of Outbound Bytes Encrypted
-+ * @ob_prot_bytes:	Number of Outbound Bytes Protected
-+ * @ib_dec_bytes:	Number of Inbound Bytes Decrypted
-+ * @ib_valid_bytes:	Number of Inbound Bytes Validated
-+ */
-+struct dpseci_sec_counters {
-+	u64 dequeued_requests;
-+	u64 ob_enc_requests;
-+	u64 ib_dec_requests;
-+	u64 ob_enc_bytes;
-+	u64 ob_prot_bytes;
-+	u64 ib_dec_bytes;
-+	u64 ib_valid_bytes;
-+};
-+
-+int dpseci_get_sec_counters(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			    struct dpseci_sec_counters *counters);
-+
- int dpseci_get_api_version(struct fsl_mc_io *mc_io, u32 cmd_flags,
- 			   u16 *major_ver, u16 *minor_ver);
- 
---- a/drivers/crypto/caam/dpseci_cmd.h
-+++ b/drivers/crypto/caam/dpseci_cmd.h
-@@ -17,6 +17,7 @@
- /* Command versioning */
- #define DPSECI_CMD_BASE_VERSION		1
- #define DPSECI_CMD_BASE_VERSION_V2	2
-+#define DPSECI_CMD_BASE_VERSION_V3	3
- #define DPSECI_CMD_ID_OFFSET		4
- 
- #define DPSECI_CMD_V1(id)	(((id) << DPSECI_CMD_ID_OFFSET) | \
-@@ -25,20 +26,34 @@
- #define DPSECI_CMD_V2(id)	(((id) << DPSECI_CMD_ID_OFFSET) | \
- 				 DPSECI_CMD_BASE_VERSION_V2)
- 
-+#define DPSECI_CMD_V3(id)	(((id) << DPSECI_CMD_ID_OFFSET) | \
-+				 DPSECI_CMD_BASE_VERSION_V3)
-+
- /* Command IDs */
- #define DPSECI_CMDID_CLOSE				DPSECI_CMD_V1(0x800)
- #define DPSECI_CMDID_OPEN				DPSECI_CMD_V1(0x809)
-+#define DPSECI_CMDID_CREATE				DPSECI_CMD_V3(0x909)
-+#define DPSECI_CMDID_DESTROY				DPSECI_CMD_V1(0x989)
- #define DPSECI_CMDID_GET_API_VERSION			DPSECI_CMD_V1(0xa09)
- 
- #define DPSECI_CMDID_ENABLE				DPSECI_CMD_V1(0x002)
- #define DPSECI_CMDID_DISABLE				DPSECI_CMD_V1(0x003)
- #define DPSECI_CMDID_GET_ATTR				DPSECI_CMD_V1(0x004)
-+#define DPSECI_CMDID_RESET				DPSECI_CMD_V1(0x005)
- #define DPSECI_CMDID_IS_ENABLED				DPSECI_CMD_V1(0x006)
- 
-+#define DPSECI_CMDID_SET_IRQ_ENABLE			DPSECI_CMD_V1(0x012)
-+#define DPSECI_CMDID_GET_IRQ_ENABLE			DPSECI_CMD_V1(0x013)
-+#define DPSECI_CMDID_SET_IRQ_MASK			DPSECI_CMD_V1(0x014)
-+#define DPSECI_CMDID_GET_IRQ_MASK			DPSECI_CMD_V1(0x015)
-+#define DPSECI_CMDID_GET_IRQ_STATUS			DPSECI_CMD_V1(0x016)
-+#define DPSECI_CMDID_CLEAR_IRQ_STATUS			DPSECI_CMD_V1(0x017)
-+
- #define DPSECI_CMDID_SET_RX_QUEUE			DPSECI_CMD_V1(0x194)
- #define DPSECI_CMDID_GET_RX_QUEUE			DPSECI_CMD_V1(0x196)
- #define DPSECI_CMDID_GET_TX_QUEUE			DPSECI_CMD_V1(0x197)
- #define DPSECI_CMDID_GET_SEC_ATTR			DPSECI_CMD_V2(0x198)
-+#define DPSECI_CMDID_GET_SEC_COUNTERS			DPSECI_CMD_V1(0x199)
- #define DPSECI_CMDID_SET_CONGESTION_NOTIFICATION	DPSECI_CMD_V1(0x170)
- #define DPSECI_CMDID_GET_CONGESTION_NOTIFICATION	DPSECI_CMD_V1(0x171)
- 
-@@ -57,6 +72,20 @@ struct dpseci_cmd_open {
- 	__le32 dpseci_id;
- };
- 
-+struct dpseci_cmd_create {
-+	u8 priorities[8];
-+	u8 num_tx_queues;
-+	u8 num_rx_queues;
-+	u8 pad0[6];
-+	__le32 options;
-+	__le32 pad1;
-+	u8 priorities2[8];
-+};
-+
-+struct dpseci_cmd_destroy {
-+	__le32 object_id;
-+};
-+
- #define DPSECI_ENABLE_SHIFT	0
- #define DPSECI_ENABLE_SIZE	1
- 
-@@ -64,6 +93,26 @@ struct dpseci_rsp_is_enabled {
- 	u8 is_enabled;
- };
- 
-+struct dpseci_cmd_irq_enable {
-+	u8 enable_state;
-+	u8 pad[3];
-+	u8 irq_index;
-+};
-+
-+struct dpseci_rsp_get_irq_enable {
-+	u8 enable_state;
-+};
-+
-+struct dpseci_cmd_irq_mask {
-+	__le32 mask;
-+	u8 irq_index;
-+};
-+
-+struct dpseci_cmd_irq_status {
-+	__le32 status;
-+	u8 irq_index;
-+};
-+
- struct dpseci_rsp_get_attributes {
- 	__le32 id;
- 	__le32 pad0;
-@@ -125,6 +174,16 @@ struct dpseci_rsp_get_sec_attr {
- 	u8 ptha_acc_num;
- };
- 
-+struct dpseci_rsp_get_sec_counters {
-+	__le64 dequeued_requests;
-+	__le64 ob_enc_requests;
-+	__le64 ib_dec_requests;
-+	__le64 ob_enc_bytes;
-+	__le64 ob_prot_bytes;
-+	__le64 ib_dec_bytes;
-+	__le64 ib_valid_bytes;
-+};
-+
- struct dpseci_rsp_get_api_version {
- 	__le16 major;
- 	__le16 minor;
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0026-crypto-caam-qi2-add-OPR-Order-Preservation-support.patch b/target/linux/layerscape/patches-5.4/804-crypto-0026-crypto-caam-qi2-add-OPR-Order-Preservation-support.patch
deleted file mode 100644
index c6975adf47..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0026-crypto-caam-qi2-add-OPR-Order-Preservation-support.patch
+++ /dev/null
@@ -1,246 +0,0 @@
-From 70eb620ed6d38e171e5619313e99d31688d25010 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Horia=20Geant=C4=83?= <horia.geanta@nxp.com>
-Date: Wed, 10 Oct 2018 16:07:50 +0300
-Subject: [PATCH] crypto: caam/qi2 - add OPR (Order Preservation) support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-During driver upstreaming OPR was removed due to lacking users.
-Add OPR back, since in LSDK / LSDK-based ADKs there is at least
-one user (ASF / VortiQa IPsec).
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/dpseci.c     | 85 ++++++++++++++++++++++++++++++++++++++++
- drivers/crypto/caam/dpseci.h     | 26 +++++++++++-
- drivers/crypto/caam/dpseci_cmd.h | 51 ++++++++++++++++++++++++
- 3 files changed, 160 insertions(+), 2 deletions(-)
-
---- a/drivers/crypto/caam/dpseci.c
-+++ b/drivers/crypto/caam/dpseci.c
-@@ -5,6 +5,7 @@
-  */
- 
- #include <linux/fsl/mc.h>
-+#include <soc/fsl/dpaa2-io.h>
- #include "dpseci.h"
- #include "dpseci_cmd.h"
- 
-@@ -675,6 +676,90 @@ int dpseci_get_api_version(struct fsl_mc
- 
- 	return 0;
- }
-+
-+/**
-+ * dpseci_set_opr() - Set Order Restoration configuration
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPSECI object
-+ * @index:	The queue index
-+ * @options:	Configuration mode options; can be OPR_OPT_CREATE or
-+ *		OPR_OPT_RETIRE
-+ * @cfg:	Configuration options for the OPR
-+ *
-+ * Return:	'0' on success, error code otherwise
-+ */
-+int dpseci_set_opr(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, u8 index,
-+		   u8 options, struct opr_cfg *cfg)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	struct dpseci_cmd_opr *cmd_params;
-+
-+	cmd.header = mc_encode_cmd_header(
-+			DPSECI_CMDID_SET_OPR,
-+			cmd_flags,
-+			token);
-+	cmd_params = (struct dpseci_cmd_opr *)cmd.params;
-+	cmd_params->index = index;
-+	cmd_params->options = options;
-+	cmd_params->oloe = cfg->oloe;
-+	cmd_params->oeane = cfg->oeane;
-+	cmd_params->olws = cfg->olws;
-+	cmd_params->oa = cfg->oa;
-+	cmd_params->oprrws = cfg->oprrws;
-+
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpseci_get_opr() - Retrieve Order Restoration config and query
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPSECI object
-+ * @index:	The queue index
-+ * @cfg:	Returned OPR configuration
-+ * @qry:	Returned OPR query
-+ *
-+ * Return:	'0' on success, error code otherwise
-+ */
-+int dpseci_get_opr(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, u8 index,
-+		   struct opr_cfg *cfg, struct opr_qry *qry)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	struct dpseci_cmd_opr *cmd_params;
-+	struct dpseci_rsp_get_opr *rsp_params;
-+	int err;
-+
-+	cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_OPR,
-+					  cmd_flags,
-+					  token);
-+	cmd_params = (struct dpseci_cmd_opr *)cmd.params;
-+	cmd_params->index = index;
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	rsp_params = (struct dpseci_rsp_get_opr *)cmd.params;
-+	qry->rip = dpseci_get_field(rsp_params->flags, OPR_RIP);
-+	qry->enable = dpseci_get_field(rsp_params->flags, OPR_ENABLE);
-+	cfg->oloe = rsp_params->oloe;
-+	cfg->oeane = rsp_params->oeane;
-+	cfg->olws = rsp_params->olws;
-+	cfg->oa = rsp_params->oa;
-+	cfg->oprrws = rsp_params->oprrws;
-+	qry->nesn = le16_to_cpu(rsp_params->nesn);
-+	qry->ndsn = le16_to_cpu(rsp_params->ndsn);
-+	qry->ea_tseq = le16_to_cpu(rsp_params->ea_tseq);
-+	qry->tseq_nlis = dpseci_get_field(rsp_params->tseq_nlis, OPR_TSEQ_NLIS);
-+	qry->ea_hseq = le16_to_cpu(rsp_params->ea_hseq);
-+	qry->hseq_nlis = dpseci_get_field(rsp_params->hseq_nlis, OPR_HSEQ_NLIS);
-+	qry->ea_hptr = le16_to_cpu(rsp_params->ea_hptr);
-+	qry->ea_tptr = le16_to_cpu(rsp_params->ea_tptr);
-+	qry->opr_vid = le16_to_cpu(rsp_params->opr_vid);
-+	qry->opr_id = le16_to_cpu(rsp_params->opr_id);
-+
-+	return 0;
-+}
- 
- /**
-  * dpseci_set_congestion_notification() - Set congestion group
---- a/drivers/crypto/caam/dpseci.h
-+++ b/drivers/crypto/caam/dpseci.h
-@@ -12,6 +12,8 @@
-  */
- 
- struct fsl_mc_io;
-+struct opr_cfg;
-+struct opr_qry;
- 
- /**
-  * General DPSECI macros
-@@ -38,9 +40,21 @@ int dpseci_close(struct fsl_mc_io *mc_io
- #define DPSECI_OPT_HAS_CG		0x000020
- 
- /**
-+ * Enable the Order Restoration support
-+ */
-+#define DPSECI_OPT_HAS_OPR		0x000040
-+
-+/**
-+ * Order Point Records are shared for the entire DPSECI
-+ */
-+#define DPSECI_OPT_OPR_SHARED		0x000080
-+
-+/**
-  * struct dpseci_cfg - Structure representing DPSECI configuration
-- * @options: Any combination of the following flags:
-+ * @options: Any combination of the following options:
-  *		DPSECI_OPT_HAS_CG
-+ *		DPSECI_OPT_HAS_OPR
-+ *		DPSECI_OPT_OPR_SHARED
-  * @num_tx_queues: num of queues towards the SEC
-  * @num_rx_queues: num of queues back from the SEC
-  * @priorities: Priorities for the SEC hardware processing;
-@@ -93,8 +107,10 @@ int dpseci_clear_irq_status(struct fsl_m
-  * @id: DPSECI object ID
-  * @num_tx_queues: number of queues towards the SEC
-  * @num_rx_queues: number of queues back from the SEC
-- * @options: any combination of the following flags:
-+ * @options: any combination of the following options:
-  *		DPSECI_OPT_HAS_CG
-+ *		DPSECI_OPT_HAS_OPR
-+ *		DPSECI_OPT_OPR_SHARED
-  */
- struct dpseci_attr {
- 	int id;
-@@ -301,6 +317,12 @@ int dpseci_get_sec_counters(struct fsl_m
- int dpseci_get_api_version(struct fsl_mc_io *mc_io, u32 cmd_flags,
- 			   u16 *major_ver, u16 *minor_ver);
- 
-+int dpseci_set_opr(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, u8 index,
-+		   u8 options, struct opr_cfg *cfg);
-+
-+int dpseci_get_opr(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, u8 index,
-+		   struct opr_cfg *cfg, struct opr_qry *qry);
-+
- /**
-  * enum dpseci_congestion_unit - DPSECI congestion units
-  * @DPSECI_CONGESTION_UNIT_BYTES: bytes units
---- a/drivers/crypto/caam/dpseci_cmd.h
-+++ b/drivers/crypto/caam/dpseci_cmd.h
-@@ -54,6 +54,8 @@
- #define DPSECI_CMDID_GET_TX_QUEUE			DPSECI_CMD_V1(0x197)
- #define DPSECI_CMDID_GET_SEC_ATTR			DPSECI_CMD_V2(0x198)
- #define DPSECI_CMDID_GET_SEC_COUNTERS			DPSECI_CMD_V1(0x199)
-+#define DPSECI_CMDID_SET_OPR				DPSECI_CMD_V1(0x19A)
-+#define DPSECI_CMDID_GET_OPR				DPSECI_CMD_V1(0x19B)
- #define DPSECI_CMDID_SET_CONGESTION_NOTIFICATION	DPSECI_CMD_V1(0x170)
- #define DPSECI_CMDID_GET_CONGESTION_NOTIFICATION	DPSECI_CMD_V1(0x171)
- 
-@@ -189,6 +191,55 @@ struct dpseci_rsp_get_api_version {
- 	__le16 minor;
- };
- 
-+struct dpseci_cmd_opr {
-+	__le16 pad;
-+	u8 index;
-+	u8 options;
-+	u8 pad1[7];
-+	u8 oloe;
-+	u8 oeane;
-+	u8 olws;
-+	u8 oa;
-+	u8 oprrws;
-+};
-+
-+#define DPSECI_OPR_RIP_SHIFT		0
-+#define DPSECI_OPR_RIP_SIZE		1
-+#define DPSECI_OPR_ENABLE_SHIFT		1
-+#define DPSECI_OPR_ENABLE_SIZE		1
-+#define DPSECI_OPR_TSEQ_NLIS_SHIFT	0
-+#define DPSECI_OPR_TSEQ_NLIS_SIZE	1
-+#define DPSECI_OPR_HSEQ_NLIS_SHIFT	0
-+#define DPSECI_OPR_HSEQ_NLIS_SIZE	1
-+
-+struct dpseci_rsp_get_opr {
-+	__le64 pad;
-+	u8 flags;
-+	u8 pad0[2];
-+	u8 oloe;
-+	u8 oeane;
-+	u8 olws;
-+	u8 oa;
-+	u8 oprrws;
-+	__le16 nesn;
-+	__le16 pad1;
-+	__le16 ndsn;
-+	__le16 pad2;
-+	__le16 ea_tseq;
-+	u8 tseq_nlis;
-+	u8 pad3;
-+	__le16 ea_hseq;
-+	u8 hseq_nlis;
-+	u8 pad4;
-+	__le16 ea_hptr;
-+	__le16 pad5;
-+	__le16 ea_tptr;
-+	__le16 pad6;
-+	__le16 opr_vid;
-+	__le16 pad7;
-+	__le16 opr_id;
-+};
-+
- #define DPSECI_CGN_DEST_TYPE_SHIFT	0
- #define DPSECI_CGN_DEST_TYPE_SIZE	4
- #define DPSECI_CGN_UNITS_SHIFT		4
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0027-crypto-caam-add-support-for-MOVEB-command.patch b/target/linux/layerscape/patches-5.4/804-crypto-0027-crypto-caam-add-support-for-MOVEB-command.patch
deleted file mode 100644
index 551be94f3f..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0027-crypto-caam-add-support-for-MOVEB-command.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From fafd87f0b6bc388b811e342ff83c88212041b119 Mon Sep 17 00:00:00 2001
-From: Radu Alexe <radu.alexe@nxp.com>
-Date: Tue, 6 Jun 2017 12:23:56 +0300
-Subject: [PATCH] crypto: caam - add support for MOVEB command
-
-CHAs of SEC work natively in BE mode. When moving
-data to the alignment blocks, swapping is needed
-for LE platforms. This is done by means of the MOVEB
-command. This patch adds support
-to DCL for this command.
-
-Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
-Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
----
- drivers/crypto/caam/desc.h        | 1 +
- drivers/crypto/caam/desc_constr.h | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/drivers/crypto/caam/desc.h
-+++ b/drivers/crypto/caam/desc.h
-@@ -43,6 +43,7 @@
- #define CMD_SEQ_LOAD		(0x03 << CMD_SHIFT)
- #define CMD_FIFO_LOAD		(0x04 << CMD_SHIFT)
- #define CMD_SEQ_FIFO_LOAD	(0x05 << CMD_SHIFT)
-+#define CMD_MOVEB		(0x07 << CMD_SHIFT)
- #define CMD_STORE		(0x0a << CMD_SHIFT)
- #define CMD_SEQ_STORE		(0x0b << CMD_SHIFT)
- #define CMD_FIFO_STORE		(0x0c << CMD_SHIFT)
---- a/drivers/crypto/caam/desc_constr.h
-+++ b/drivers/crypto/caam/desc_constr.h
-@@ -240,6 +240,7 @@ static inline u32 *append_##cmd(u32 * co
- APPEND_CMD_RET(jump, JUMP)
- APPEND_CMD_RET(move, MOVE)
- APPEND_CMD_RET(move_len, MOVE_LEN)
-+APPEND_CMD_RET(moveb, MOVEB)
- 
- static inline void set_jump_tgt_here(u32 * const desc, u32 *jump_cmd)
- {
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0028-crypto-caam-qi-add-support-for-TLS-1.0-record.patch b/target/linux/layerscape/patches-5.4/804-crypto-0028-crypto-caam-qi-add-support-for-TLS-1.0-record.patch
deleted file mode 100644
index 967266ea4a..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0028-crypto-caam-qi-add-support-for-TLS-1.0-record.patch
+++ /dev/null
@@ -1,1048 +0,0 @@
-From 47824cc9417946b49b80e88c74ab5ee69eacc2a7 Mon Sep 17 00:00:00 2001
-From: Radu Alexe <radu.alexe@nxp.com>
-Date: Thu, 25 May 2017 15:51:50 +0300
-Subject: [PATCH] crypto: caam/qi - add support for TLS 1.0 record
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-TLS 1.0 descriptors run on SEC 4.x or higher.
-For now, only tls10(hmac(sha1),cbc(aes)) algorithm
-is registered by the driver.
-
-Known limitations:
- - when src == dst - there should be no element in the src scatterlist array
-   that contains both associated data and message data.
- - when src != dst - associated data is not copied from source into
-   destination.
- - for decryption when src != dst the size of the destination should be
-   large enough so that the buffer may contain the decrypted authenc and
-   padded data.
-
-Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
-Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com>
-Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
-Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
----
- drivers/crypto/caam/caamalg_desc.c | 414 ++++++++++++++++++++++++++++++++
- drivers/crypto/caam/caamalg_desc.h |  13 +
- drivers/crypto/caam/caamalg_qi.c   | 478 +++++++++++++++++++++++++++++++++++++
- drivers/crypto/caam/desc.h         |  27 +++
- 4 files changed, 932 insertions(+)
-
---- a/drivers/crypto/caam/caamalg_desc.c
-+++ b/drivers/crypto/caam/caamalg_desc.c
-@@ -622,6 +622,420 @@ copy_iv:
- EXPORT_SYMBOL(cnstr_shdsc_aead_givencap);
- 
- /**
-+ * cnstr_shdsc_tls_encap - tls encapsulation shared descriptor
-+ * @desc: pointer to buffer used for descriptor construction
-+ * @cdata: pointer to block cipher transform definitions
-+ *         Valid algorithm values - one of OP_ALG_ALGSEL_AES ANDed
-+ *         with OP_ALG_AAI_CBC
-+ * @adata: pointer to authentication transform definitions.
-+ *         A split key is required for SEC Era < 6; the size of the split key
-+ *         is specified in this case. Valid algorithm values OP_ALG_ALGSEL_SHA1
-+ *         ANDed with OP_ALG_AAI_HMAC_PRECOMP.
-+ * @assoclen: associated data length
-+ * @ivsize: initialization vector size
-+ * @authsize: authentication data size
-+ * @blocksize: block cipher size
-+ * @era: SEC Era
-+ */
-+void cnstr_shdsc_tls_encap(u32 * const desc, struct alginfo *cdata,
-+			   struct alginfo *adata, unsigned int assoclen,
-+			   unsigned int ivsize, unsigned int authsize,
-+			   unsigned int blocksize, int era)
-+{
-+	u32 *key_jump_cmd, *zero_payload_jump_cmd;
-+	u32 genpad, idx_ld_datasz, idx_ld_pad, stidx;
-+
-+	/*
-+	 * Compute the index (in bytes) for the LOAD with destination of
-+	 * Class 1 Data Size Register and for the LOAD that generates padding
-+	 */
-+	if (adata->key_inline) {
-+		idx_ld_datasz = DESC_TLS10_ENC_LEN + adata->keylen_pad +
-+				cdata->keylen - 4 * CAAM_CMD_SZ;
-+		idx_ld_pad = DESC_TLS10_ENC_LEN + adata->keylen_pad +
-+			     cdata->keylen - 2 * CAAM_CMD_SZ;
-+	} else {
-+		idx_ld_datasz = DESC_TLS10_ENC_LEN + 2 * CAAM_PTR_SZ -
-+				4 * CAAM_CMD_SZ;
-+		idx_ld_pad = DESC_TLS10_ENC_LEN + 2 * CAAM_PTR_SZ -
-+			     2 * CAAM_CMD_SZ;
-+	}
-+
-+	stidx = 1 << HDR_START_IDX_SHIFT;
-+	init_sh_desc(desc, HDR_SHARE_SERIAL | stidx);
-+
-+	/* skip key loading if they are loaded due to sharing */
-+	key_jump_cmd = append_jump(desc, JUMP_JSL | JUMP_TEST_ALL |
-+				   JUMP_COND_SHRD);
-+
-+	if (era < 6) {
-+		if (adata->key_inline)
-+			append_key_as_imm(desc, adata->key_virt,
-+					  adata->keylen_pad, adata->keylen,
-+					  CLASS_2 | KEY_DEST_MDHA_SPLIT |
-+					  KEY_ENC);
-+		else
-+			append_key(desc, adata->key_dma, adata->keylen,
-+				   CLASS_2 | KEY_DEST_MDHA_SPLIT | KEY_ENC);
-+	} else {
-+		append_proto_dkp(desc, adata);
-+	}
-+
-+	if (cdata->key_inline)
-+		append_key_as_imm(desc, cdata->key_virt, cdata->keylen,
-+				  cdata->keylen, CLASS_1 | KEY_DEST_CLASS_REG);
-+	else
-+		append_key(desc, cdata->key_dma, cdata->keylen, CLASS_1 |
-+			   KEY_DEST_CLASS_REG);
-+
-+	set_jump_tgt_here(desc, key_jump_cmd);
-+
-+	/* class 2 operation */
-+	append_operation(desc, adata->algtype | OP_ALG_AS_INITFINAL |
-+			 OP_ALG_ENCRYPT);
-+	/* class 1 operation */
-+	append_operation(desc, cdata->algtype | OP_ALG_AS_INITFINAL |
-+			 OP_ALG_ENCRYPT);
-+
-+	/* payloadlen = input data length - (assoclen + ivlen) */
-+	append_math_sub_imm_u32(desc, REG0, SEQINLEN, IMM, assoclen + ivsize);
-+
-+	/* math1 = payloadlen + icvlen */
-+	append_math_add_imm_u32(desc, REG1, REG0, IMM, authsize);
-+
-+	/* padlen = block_size - math1 % block_size */
-+	append_math_and_imm_u32(desc, REG3, REG1, IMM, blocksize - 1);
-+	append_math_sub_imm_u32(desc, REG2, IMM, REG3, blocksize);
-+
-+	/* cryptlen = payloadlen + icvlen + padlen */
-+	append_math_add(desc, VARSEQOUTLEN, REG1, REG2, 4);
-+
-+	/*
-+	 * update immediate data with the padding length value
-+	 * for the LOAD in the class 1 data size register.
-+	 */
-+	append_move(desc, MOVE_SRC_DESCBUF | MOVE_DEST_MATH2 |
-+			(idx_ld_datasz << MOVE_OFFSET_SHIFT) | 7);
-+	append_move(desc, MOVE_WAITCOMP | MOVE_SRC_MATH2 | MOVE_DEST_DESCBUF |
-+			(idx_ld_datasz << MOVE_OFFSET_SHIFT) | 8);
-+
-+	/* overwrite PL field for the padding iNFO FIFO entry  */
-+	append_move(desc, MOVE_SRC_DESCBUF | MOVE_DEST_MATH2 |
-+			(idx_ld_pad << MOVE_OFFSET_SHIFT) | 7);
-+	append_move(desc, MOVE_WAITCOMP | MOVE_SRC_MATH2 | MOVE_DEST_DESCBUF |
-+			(idx_ld_pad << MOVE_OFFSET_SHIFT) | 8);
-+
-+	/* store encrypted payload, icv and padding */
-+	append_seq_fifo_store(desc, 0, FIFOST_TYPE_MESSAGE_DATA | LDST_VLF);
-+
-+	/* if payload length is zero, jump to zero-payload commands */
-+	append_math_add(desc, VARSEQINLEN, ZERO, REG0, 4);
-+	zero_payload_jump_cmd = append_jump(desc, JUMP_TEST_ALL |
-+					    JUMP_COND_MATH_Z);
-+
-+	/* load iv in context1 */
-+	append_cmd(desc, CMD_SEQ_LOAD | LDST_SRCDST_WORD_CLASS_CTX |
-+		   LDST_CLASS_1_CCB | ivsize);
-+
-+	/* read assoc for authentication */
-+	append_seq_fifo_load(desc, assoclen, FIFOLD_CLASS_CLASS2 |
-+			     FIFOLD_TYPE_MSG);
-+	/* insnoop payload */
-+	append_seq_fifo_load(desc, 0, FIFOLD_CLASS_BOTH | FIFOLD_TYPE_MSG |
-+			     FIFOLD_TYPE_LAST2 | FIFOLDST_VLF);
-+
-+	/* jump the zero-payload commands */
-+	append_jump(desc, JUMP_TEST_ALL | 3);
-+
-+	/* zero-payload commands */
-+	set_jump_tgt_here(desc, zero_payload_jump_cmd);
-+
-+	/* load iv in context1 */
-+	append_cmd(desc, CMD_SEQ_LOAD | LDST_SRCDST_WORD_CLASS_CTX |
-+		   LDST_CLASS_1_CCB | ivsize);
-+
-+	/* assoc data is the only data for authentication */
-+	append_seq_fifo_load(desc, assoclen, FIFOLD_CLASS_CLASS2 |
-+			     FIFOLD_TYPE_MSG | FIFOLD_TYPE_LAST2);
-+
-+	/* send icv to encryption */
-+	append_move(desc, MOVE_SRC_CLASS2CTX | MOVE_DEST_CLASS1INFIFO |
-+		    authsize);
-+
-+	/* update class 1 data size register with padding length */
-+	append_load_imm_u32(desc, 0, LDST_CLASS_1_CCB |
-+			    LDST_SRCDST_WORD_DATASZ_REG | LDST_IMM);
-+
-+	/* generate padding and send it to encryption */
-+	genpad = NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_LC1 | NFIFOENTRY_FC1 |
-+	      NFIFOENTRY_STYPE_PAD | NFIFOENTRY_DTYPE_MSG | NFIFOENTRY_PTYPE_N;
-+	append_load_imm_u32(desc, genpad, LDST_CLASS_IND_CCB |
-+			    LDST_SRCDST_WORD_INFO_FIFO | LDST_IMM);
-+
-+#ifdef DEBUG
-+	print_hex_dump(KERN_ERR, "tls enc shdesc@" __stringify(__LINE__) ": ",
-+		       DUMP_PREFIX_ADDRESS, 16, 4, desc,
-+		       desc_bytes(desc), 1);
-+#endif
-+}
-+EXPORT_SYMBOL(cnstr_shdsc_tls_encap);
-+
-+/**
-+ * cnstr_shdsc_tls_decap - tls decapsulation shared descriptor
-+ * @desc: pointer to buffer used for descriptor construction
-+ * @cdata: pointer to block cipher transform definitions
-+ *         Valid algorithm values - one of OP_ALG_ALGSEL_AES ANDed
-+ *         with OP_ALG_AAI_CBC
-+ * @adata: pointer to authentication transform definitions.
-+ *         A split key is required for SEC Era < 6; the size of the split key
-+ *         is specified in this case. Valid algorithm values OP_ALG_ALGSEL_SHA1
-+ *         ANDed with OP_ALG_AAI_HMAC_PRECOMP.
-+ * @assoclen: associated data length
-+ * @ivsize: initialization vector size
-+ * @authsize: authentication data size
-+ * @blocksize: block cipher size
-+ * @era: SEC Era
-+ */
-+void cnstr_shdsc_tls_decap(u32 * const desc, struct alginfo *cdata,
-+			   struct alginfo *adata, unsigned int assoclen,
-+			   unsigned int ivsize, unsigned int authsize,
-+			   unsigned int blocksize, int era)
-+{
-+	u32 stidx, jumpback;
-+	u32 *key_jump_cmd, *zero_payload_jump_cmd, *skip_zero_jump_cmd;
-+	/*
-+	 * Pointer Size bool determines the size of address pointers.
-+	 * false - Pointers fit in one 32-bit word.
-+	 * true - Pointers fit in two 32-bit words.
-+	 */
-+	bool ps = (CAAM_PTR_SZ != CAAM_CMD_SZ);
-+
-+	stidx = 1 << HDR_START_IDX_SHIFT;
-+	init_sh_desc(desc, HDR_SHARE_SERIAL | stidx);
-+
-+	/* skip key loading if they are loaded due to sharing */
-+	key_jump_cmd = append_jump(desc, JUMP_JSL | JUMP_TEST_ALL |
-+				   JUMP_COND_SHRD);
-+
-+	if (era < 6)
-+		append_key(desc, adata->key_dma, adata->keylen, CLASS_2 |
-+			   KEY_DEST_MDHA_SPLIT | KEY_ENC);
-+	else
-+		append_proto_dkp(desc, adata);
-+
-+	append_key(desc, cdata->key_dma, cdata->keylen, CLASS_1 |
-+		   KEY_DEST_CLASS_REG);
-+
-+	set_jump_tgt_here(desc, key_jump_cmd);
-+
-+	/* class 2 operation */
-+	append_operation(desc, adata->algtype | OP_ALG_AS_INITFINAL |
-+			 OP_ALG_DECRYPT | OP_ALG_ICV_ON);
-+	/* class 1 operation */
-+	append_operation(desc, cdata->algtype | OP_ALG_AS_INITFINAL |
-+			 OP_ALG_DECRYPT);
-+
-+	/* VSIL = input data length - 2 * block_size */
-+	append_math_sub_imm_u32(desc, VARSEQINLEN, SEQINLEN, IMM, 2 *
-+				blocksize);
-+
-+	/*
-+	 * payloadlen + icvlen + padlen = input data length - (assoclen +
-+	 * ivsize)
-+	 */
-+	append_math_sub_imm_u32(desc, REG3, SEQINLEN, IMM, assoclen + ivsize);
-+
-+	/* skip data to the last but one cipher block */
-+	append_seq_fifo_load(desc, 0, FIFOLD_CLASS_SKIP | LDST_VLF);
-+
-+	/* load iv for the last cipher block */
-+	append_cmd(desc, CMD_SEQ_LOAD | LDST_SRCDST_WORD_CLASS_CTX |
-+		   LDST_CLASS_1_CCB | ivsize);
-+
-+	/* read last cipher block */
-+	append_seq_fifo_load(desc, 0, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_MSG |
-+			     FIFOLD_TYPE_LAST1 | blocksize);
-+
-+	/* move decrypted block into math0 and math1 */
-+	append_move(desc, MOVE_WAITCOMP | MOVE_SRC_OUTFIFO | MOVE_DEST_MATH0 |
-+		    blocksize);
-+
-+	/* reset AES CHA */
-+	append_load_imm_u32(desc, CCTRL_RESET_CHA_AESA, LDST_CLASS_IND_CCB |
-+			    LDST_SRCDST_WORD_CHACTRL | LDST_IMM);
-+
-+	/* rewind input sequence */
-+	append_seq_in_ptr_intlen(desc, 0, 65535, SQIN_RTO);
-+
-+	/* key1 is in decryption form */
-+	append_operation(desc, cdata->algtype | OP_ALG_AAI_DK |
-+			 OP_ALG_AS_INITFINAL | OP_ALG_DECRYPT);
-+
-+	/* load iv in context1 */
-+	append_cmd(desc, CMD_SEQ_LOAD | LDST_CLASS_1_CCB |
-+		   LDST_SRCDST_WORD_CLASS_CTX | ivsize);
-+
-+	/* read sequence number */
-+	append_seq_fifo_load(desc, 8, FIFOLD_CLASS_CLASS2 | FIFOLD_TYPE_MSG);
-+	/* load Type, Version and Len fields in math0 */
-+	append_cmd(desc, CMD_SEQ_LOAD | LDST_CLASS_DECO |
-+		   LDST_SRCDST_WORD_DECO_MATH0 | (3 << LDST_OFFSET_SHIFT) | 5);
-+
-+	/* compute (padlen - 1) */
-+	append_math_and_imm_u64(desc, REG1, REG1, IMM, 255);
-+
-+	/* math2 = icvlen + (padlen - 1) + 1 */
-+	append_math_add_imm_u32(desc, REG2, REG1, IMM, authsize + 1);
-+
-+	append_jump(desc, JUMP_TEST_ALL | JUMP_COND_CALM | 1);
-+
-+	/* VSOL = payloadlen + icvlen + padlen */
-+	append_math_add(desc, VARSEQOUTLEN, ZERO, REG3, 4);
-+
-+	if (caam_little_end)
-+		append_moveb(desc, MOVE_WAITCOMP |
-+			     MOVE_SRC_MATH0 | MOVE_DEST_MATH0 | 8);
-+
-+	/* update Len field */
-+	append_math_sub(desc, REG0, REG0, REG2, 8);
-+
-+	/* store decrypted payload, icv and padding */
-+	append_seq_fifo_store(desc, 0, FIFOST_TYPE_MESSAGE_DATA | LDST_VLF);
-+
-+	/* VSIL = (payloadlen + icvlen + padlen) - (icvlen + padlen)*/
-+	append_math_sub(desc, VARSEQINLEN, REG3, REG2, 4);
-+
-+	zero_payload_jump_cmd = append_jump(desc, JUMP_TEST_ALL |
-+					    JUMP_COND_MATH_Z);
-+
-+	/* send Type, Version and Len(pre ICV) fields to authentication */
-+	append_move(desc, MOVE_WAITCOMP |
-+		    MOVE_SRC_MATH0 | MOVE_DEST_CLASS2INFIFO |
-+		    (3 << MOVE_OFFSET_SHIFT) | 5);
-+
-+	/* outsnooping payload */
-+	append_seq_fifo_load(desc, 0, FIFOLD_CLASS_BOTH |
-+			     FIFOLD_TYPE_MSG1OUT2 | FIFOLD_TYPE_LAST2 |
-+			     FIFOLDST_VLF);
-+	skip_zero_jump_cmd = append_jump(desc, JUMP_TEST_ALL | 2);
-+
-+	set_jump_tgt_here(desc, zero_payload_jump_cmd);
-+	/* send Type, Version and Len(pre ICV) fields to authentication */
-+	append_move(desc, MOVE_WAITCOMP | MOVE_AUX_LS |
-+		    MOVE_SRC_MATH0 | MOVE_DEST_CLASS2INFIFO |
-+		    (3 << MOVE_OFFSET_SHIFT) | 5);
-+
-+	set_jump_tgt_here(desc, skip_zero_jump_cmd);
-+	append_math_add(desc, VARSEQINLEN, ZERO, REG2, 4);
-+
-+	/* load icvlen and padlen */
-+	append_seq_fifo_load(desc, 0, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_MSG |
-+			     FIFOLD_TYPE_LAST1 | FIFOLDST_VLF);
-+
-+	/* VSIL = (payloadlen + icvlen + padlen) - icvlen + padlen */
-+	append_math_sub(desc, VARSEQINLEN, REG3, REG2, 4);
-+
-+	/*
-+	 * Start a new input sequence using the SEQ OUT PTR command options,
-+	 * pointer and length used when the current output sequence was defined.
-+	 */
-+	if (ps) {
-+		/*
-+		 * Move the lower 32 bits of Shared Descriptor address, the
-+		 * SEQ OUT PTR command, Output Pointer (2 words) and
-+		 * Output Length into math registers.
-+		 */
-+		if (caam_little_end)
-+			append_move(desc, MOVE_WAITCOMP | MOVE_SRC_DESCBUF |
-+				    MOVE_DEST_MATH0 |
-+				    (55 * 4 << MOVE_OFFSET_SHIFT) | 20);
-+		else
-+			append_move(desc, MOVE_WAITCOMP | MOVE_SRC_DESCBUF |
-+				    MOVE_DEST_MATH0 |
-+				    (54 * 4 << MOVE_OFFSET_SHIFT) | 20);
-+
-+		/* Transform SEQ OUT PTR command in SEQ IN PTR command */
-+		append_math_and_imm_u32(desc, REG0, REG0, IMM,
-+					~(CMD_SEQ_IN_PTR ^ CMD_SEQ_OUT_PTR));
-+		/* Append a JUMP command after the copied fields */
-+		jumpback = CMD_JUMP | (char)-9;
-+		append_load_imm_u32(desc, jumpback, LDST_CLASS_DECO | LDST_IMM |
-+				    LDST_SRCDST_WORD_DECO_MATH2 |
-+				    (4 << LDST_OFFSET_SHIFT));
-+		append_jump(desc, JUMP_TEST_ALL | JUMP_COND_CALM | 1);
-+		/* Move the updated fields back to the Job Descriptor */
-+		if (caam_little_end)
-+			append_move(desc, MOVE_WAITCOMP | MOVE_SRC_MATH0 |
-+				    MOVE_DEST_DESCBUF |
-+				    (55 * 4 << MOVE_OFFSET_SHIFT) | 24);
-+		else
-+			append_move(desc, MOVE_WAITCOMP | MOVE_SRC_MATH0 |
-+				    MOVE_DEST_DESCBUF |
-+				    (54 * 4 << MOVE_OFFSET_SHIFT) | 24);
-+
-+		/*
-+		 * Read the new SEQ IN PTR command, Input Pointer, Input Length
-+		 * and then jump back to the next command from the
-+		 * Shared Descriptor.
-+		 */
-+		append_jump(desc, JUMP_TEST_ALL | JUMP_COND_CALM | 6);
-+	} else {
-+		/*
-+		 * Move the SEQ OUT PTR command, Output Pointer (1 word) and
-+		 * Output Length into math registers.
-+		 */
-+		if (caam_little_end)
-+			append_move(desc, MOVE_WAITCOMP | MOVE_SRC_DESCBUF |
-+				    MOVE_DEST_MATH0 |
-+				    (54 * 4 << MOVE_OFFSET_SHIFT) | 12);
-+		else
-+			append_move(desc, MOVE_WAITCOMP | MOVE_SRC_DESCBUF |
-+				    MOVE_DEST_MATH0 |
-+				    (53 * 4 << MOVE_OFFSET_SHIFT) | 12);
-+
-+		/* Transform SEQ OUT PTR command in SEQ IN PTR command */
-+		append_math_and_imm_u64(desc, REG0, REG0, IMM,
-+					~(((u64)(CMD_SEQ_IN_PTR ^
-+						 CMD_SEQ_OUT_PTR)) << 32));
-+		/* Append a JUMP command after the copied fields */
-+		jumpback = CMD_JUMP | (char)-7;
-+		append_load_imm_u32(desc, jumpback, LDST_CLASS_DECO | LDST_IMM |
-+				    LDST_SRCDST_WORD_DECO_MATH1 |
-+				    (4 << LDST_OFFSET_SHIFT));
-+		append_jump(desc, JUMP_TEST_ALL | JUMP_COND_CALM | 1);
-+		/* Move the updated fields back to the Job Descriptor */
-+		if (caam_little_end)
-+			append_move(desc, MOVE_WAITCOMP | MOVE_SRC_MATH0 |
-+				    MOVE_DEST_DESCBUF |
-+				    (54 * 4 << MOVE_OFFSET_SHIFT) | 16);
-+		else
-+			append_move(desc, MOVE_WAITCOMP | MOVE_SRC_MATH0 |
-+				    MOVE_DEST_DESCBUF |
-+				    (53 * 4 << MOVE_OFFSET_SHIFT) | 16);
-+
-+		/*
-+		 * Read the new SEQ IN PTR command, Input Pointer, Input Length
-+		 * and then jump back to the next command from the
-+		 * Shared Descriptor.
-+		 */
-+		 append_jump(desc, JUMP_TEST_ALL | JUMP_COND_CALM | 5);
-+	}
-+
-+	/* skip payload */
-+	append_seq_fifo_load(desc, 0, FIFOLD_CLASS_SKIP | FIFOLDST_VLF);
-+	/* check icv */
-+	append_seq_fifo_load(desc, 0, FIFOLD_CLASS_CLASS2 | FIFOLD_TYPE_ICV |
-+			     FIFOLD_TYPE_LAST2 | authsize);
-+
-+#ifdef DEBUG
-+	print_hex_dump(KERN_ERR, "tls dec shdesc@" __stringify(__LINE__) ": ",
-+		       DUMP_PREFIX_ADDRESS, 16, 4, desc,
-+		       desc_bytes(desc), 1);
-+#endif
-+}
-+EXPORT_SYMBOL(cnstr_shdsc_tls_decap);
-+
-+/**
-  * cnstr_shdsc_gcm_encap - gcm encapsulation shared descriptor
-  * @desc: pointer to buffer used for descriptor construction
-  * @cdata: pointer to block cipher transform definitions
---- a/drivers/crypto/caam/caamalg_desc.h
-+++ b/drivers/crypto/caam/caamalg_desc.h
-@@ -17,6 +17,9 @@
- #define DESC_QI_AEAD_DEC_LEN		(DESC_AEAD_DEC_LEN + 3 * CAAM_CMD_SZ)
- #define DESC_QI_AEAD_GIVENC_LEN		(DESC_AEAD_GIVENC_LEN + 3 * CAAM_CMD_SZ)
- 
-+#define DESC_TLS_BASE			(4 * CAAM_CMD_SZ)
-+#define DESC_TLS10_ENC_LEN		(DESC_TLS_BASE + 29 * CAAM_CMD_SZ)
-+
- /* Note: Nonce is counted in cdata.keylen */
- #define DESC_AEAD_CTR_RFC3686_LEN	(4 * CAAM_CMD_SZ)
- 
-@@ -72,6 +75,16 @@ void cnstr_shdsc_aead_givencap(u32 * con
- 			       u32 *nonce, const u32 ctx1_iv_off,
- 			       const bool is_qi, int era);
- 
-+void cnstr_shdsc_tls_encap(u32 *const desc, struct alginfo *cdata,
-+			   struct alginfo *adata, unsigned int assoclen,
-+			   unsigned int ivsize, unsigned int authsize,
-+			   unsigned int blocksize, int era);
-+
-+void cnstr_shdsc_tls_decap(u32 *const desc, struct alginfo *cdata,
-+			   struct alginfo *adata, unsigned int assoclen,
-+			   unsigned int ivsize, unsigned int authsize,
-+			   unsigned int blocksize, int era);
-+
- void cnstr_shdsc_gcm_encap(u32 * const desc, struct alginfo *cdata,
- 			   unsigned int ivsize, unsigned int icvsize,
- 			   const bool is_qi);
---- a/drivers/crypto/caam/caamalg_qi.c
-+++ b/drivers/crypto/caam/caamalg_qi.c
-@@ -296,6 +296,167 @@ static int des3_aead_setkey(struct crypt
- 	return err;
- }
- 
-+static int tls_set_sh_desc(struct crypto_aead *tls)
-+{
-+	struct caam_ctx *ctx = crypto_aead_ctx(tls);
-+	unsigned int ivsize = crypto_aead_ivsize(tls);
-+	unsigned int blocksize = crypto_aead_blocksize(tls);
-+	unsigned int assoclen = 13; /* always 13 bytes for TLS */
-+	unsigned int data_len[2];
-+	u32 inl_mask;
-+	struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctx->jrdev->parent);
-+
-+	if (!ctx->cdata.keylen || !ctx->authsize)
-+		return 0;
-+
-+	/*
-+	 * TLS 1.0 encrypt shared descriptor
-+	 * Job Descriptor and Shared Descriptor
-+	 * must fit into the 64-word Descriptor h/w Buffer
-+	 */
-+	data_len[0] = ctx->adata.keylen_pad;
-+	data_len[1] = ctx->cdata.keylen;
-+
-+	if (desc_inline_query(DESC_TLS10_ENC_LEN, DESC_JOB_IO_LEN, data_len,
-+			      &inl_mask, ARRAY_SIZE(data_len)) < 0)
-+		return -EINVAL;
-+
-+	if (inl_mask & 1)
-+		ctx->adata.key_virt = ctx->key;
-+	else
-+		ctx->adata.key_dma = ctx->key_dma;
-+
-+	if (inl_mask & 2)
-+		ctx->cdata.key_virt = ctx->key + ctx->adata.keylen_pad;
-+	else
-+		ctx->cdata.key_dma = ctx->key_dma + ctx->adata.keylen_pad;
-+
-+	ctx->adata.key_inline = !!(inl_mask & 1);
-+	ctx->cdata.key_inline = !!(inl_mask & 2);
-+
-+	cnstr_shdsc_tls_encap(ctx->sh_desc_enc, &ctx->cdata, &ctx->adata,
-+			      assoclen, ivsize, ctx->authsize, blocksize,
-+			      ctrlpriv->era);
-+
-+	/*
-+	 * TLS 1.0 decrypt shared descriptor
-+	 * Keys do not fit inline, regardless of algorithms used
-+	 */
-+	ctx->adata.key_inline = false;
-+	ctx->adata.key_dma = ctx->key_dma;
-+	ctx->cdata.key_dma = ctx->key_dma + ctx->adata.keylen_pad;
-+
-+	cnstr_shdsc_tls_decap(ctx->sh_desc_dec, &ctx->cdata, &ctx->adata,
-+			      assoclen, ivsize, ctx->authsize, blocksize,
-+			      ctrlpriv->era);
-+
-+	return 0;
-+}
-+
-+static int tls_setauthsize(struct crypto_aead *tls, unsigned int authsize)
-+{
-+	struct caam_ctx *ctx = crypto_aead_ctx(tls);
-+
-+	ctx->authsize = authsize;
-+	tls_set_sh_desc(tls);
-+
-+	return 0;
-+}
-+
-+static int tls_setkey(struct crypto_aead *tls, const u8 *key,
-+		      unsigned int keylen)
-+{
-+	struct caam_ctx *ctx = crypto_aead_ctx(tls);
-+	struct device *jrdev = ctx->jrdev;
-+	struct caam_drv_private *ctrlpriv = dev_get_drvdata(jrdev->parent);
-+	struct crypto_authenc_keys keys;
-+	int ret = 0;
-+
-+	if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
-+		goto badkey;
-+
-+#ifdef DEBUG
-+	dev_err(jrdev, "keylen %d enckeylen %d authkeylen %d\n",
-+		keys.authkeylen + keys.enckeylen, keys.enckeylen,
-+		keys.authkeylen);
-+	print_hex_dump(KERN_ERR, "key in @" __stringify(__LINE__)": ",
-+		       DUMP_PREFIX_ADDRESS, 16, 4, key, keylen, 1);
-+#endif
-+
-+	/*
-+	 * If DKP is supported, use it in the shared descriptor to generate
-+	 * the split key.
-+	 */
-+	if (ctrlpriv->era >= 6) {
-+		ctx->adata.keylen = keys.authkeylen;
-+		ctx->adata.keylen_pad = split_key_len(ctx->adata.algtype &
-+						      OP_ALG_ALGSEL_MASK);
-+
-+		if (ctx->adata.keylen_pad + keys.enckeylen > CAAM_MAX_KEY_SIZE)
-+			goto badkey;
-+
-+		memcpy(ctx->key, keys.authkey, keys.authkeylen);
-+		memcpy(ctx->key + ctx->adata.keylen_pad, keys.enckey,
-+		       keys.enckeylen);
-+		dma_sync_single_for_device(jrdev, ctx->key_dma,
-+					   ctx->adata.keylen_pad +
-+					   keys.enckeylen, ctx->dir);
-+		goto skip_split_key;
-+	}
-+
-+	ret = gen_split_key(jrdev, ctx->key, &ctx->adata, keys.authkey,
-+			    keys.authkeylen, CAAM_MAX_KEY_SIZE -
-+			    keys.enckeylen);
-+	if (ret)
-+		goto badkey;
-+
-+	/* postpend encryption key to auth split key */
-+	memcpy(ctx->key + ctx->adata.keylen_pad, keys.enckey, keys.enckeylen);
-+	dma_sync_single_for_device(jrdev, ctx->key_dma, ctx->adata.keylen_pad +
-+				   keys.enckeylen, ctx->dir);
-+
-+#ifdef DEBUG
-+	dev_err(jrdev, "split keylen %d split keylen padded %d\n",
-+		ctx->adata.keylen, ctx->adata.keylen_pad);
-+	print_hex_dump(KERN_ERR, "ctx.key@" __stringify(__LINE__)": ",
-+		       DUMP_PREFIX_ADDRESS, 16, 4, ctx->key,
-+		       ctx->adata.keylen_pad + keys.enckeylen, 1);
-+#endif
-+
-+skip_split_key:
-+	ctx->cdata.keylen = keys.enckeylen;
-+
-+	ret = tls_set_sh_desc(tls);
-+	if (ret)
-+		goto badkey;
-+
-+	/* Now update the driver contexts with the new shared descriptor */
-+	if (ctx->drv_ctx[ENCRYPT]) {
-+		ret = caam_drv_ctx_update(ctx->drv_ctx[ENCRYPT],
-+					  ctx->sh_desc_enc);
-+		if (ret) {
-+			dev_err(jrdev, "driver enc context update failed\n");
-+			goto badkey;
-+		}
-+	}
-+
-+	if (ctx->drv_ctx[DECRYPT]) {
-+		ret = caam_drv_ctx_update(ctx->drv_ctx[DECRYPT],
-+					  ctx->sh_desc_dec);
-+		if (ret) {
-+			dev_err(jrdev, "driver dec context update failed\n");
-+			goto badkey;
-+		}
-+	}
-+
-+	memzero_explicit(&keys, sizeof(keys));
-+	return ret;
-+badkey:
-+	crypto_aead_set_flags(tls, CRYPTO_TFM_RES_BAD_KEY_LEN);
-+	memzero_explicit(&keys, sizeof(keys));
-+	return -EINVAL;
-+}
-+
- static int gcm_set_sh_desc(struct crypto_aead *aead)
- {
- 	struct caam_ctx *ctx = crypto_aead_ctx(aead);
-@@ -820,6 +981,29 @@ struct aead_edesc {
- };
- 
- /*
-+ * tls_edesc - s/w-extended tls descriptor
-+ * @src_nents: number of segments in input scatterlist
-+ * @dst_nents: number of segments in output scatterlist
-+ * @iv_dma: dma address of iv for checking continuity and link table
-+ * @qm_sg_bytes: length of dma mapped h/w link table
-+ * @tmp: array of scatterlists used by 'scatterwalk_ffwd'
-+ * @qm_sg_dma: bus physical mapped address of h/w link table
-+ * @drv_req: driver-specific request structure
-+ * @sgt: the h/w link table, followed by IV
-+ */
-+struct tls_edesc {
-+	int src_nents;
-+	int dst_nents;
-+	dma_addr_t iv_dma;
-+	int qm_sg_bytes;
-+	dma_addr_t qm_sg_dma;
-+	struct scatterlist tmp[2];
-+	struct scatterlist *dst;
-+	struct caam_drv_req drv_req;
-+	struct qm_sg_entry sgt[0];
-+};
-+
-+/*
-  * skcipher_edesc - s/w-extended skcipher descriptor
-  * @src_nents: number of segments in input scatterlist
-  * @dst_nents: number of segments in output scatterlist
-@@ -911,6 +1095,18 @@ static void aead_unmap(struct device *de
- 	dma_unmap_single(dev, edesc->assoclen_dma, 4, DMA_TO_DEVICE);
- }
- 
-+static void tls_unmap(struct device *dev,
-+		      struct tls_edesc *edesc,
-+		      struct aead_request *req)
-+{
-+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
-+	int ivsize = crypto_aead_ivsize(aead);
-+
-+	caam_unmap(dev, req->src, edesc->dst, edesc->src_nents,
-+		   edesc->dst_nents, edesc->iv_dma, ivsize, DMA_TO_DEVICE,
-+		   edesc->qm_sg_dma, edesc->qm_sg_bytes);
-+}
-+
- static void skcipher_unmap(struct device *dev, struct skcipher_edesc *edesc,
- 			   struct skcipher_request *req)
- {
-@@ -1203,6 +1399,243 @@ static int aead_decrypt(struct aead_requ
- 	return aead_crypt(req, false);
- }
- 
-+static void tls_done(struct caam_drv_req *drv_req, u32 status)
-+{
-+	struct device *qidev;
-+	struct tls_edesc *edesc;
-+	struct aead_request *aead_req = drv_req->app_ctx;
-+	struct crypto_aead *aead = crypto_aead_reqtfm(aead_req);
-+	struct caam_ctx *caam_ctx = crypto_aead_ctx(aead);
-+	int ecode = 0;
-+
-+	qidev = caam_ctx->qidev;
-+
-+	if (unlikely(status)) {
-+		caam_jr_strstatus(qidev, status);
-+		ecode = -EIO;
-+	}
-+
-+	edesc = container_of(drv_req, typeof(*edesc), drv_req);
-+	tls_unmap(qidev, edesc, aead_req);
-+
-+	aead_request_complete(aead_req, ecode);
-+	qi_cache_free(edesc);
-+}
-+
-+/*
-+ * allocate and map the tls extended descriptor
-+ */
-+static struct tls_edesc *tls_edesc_alloc(struct aead_request *req, bool encrypt)
-+{
-+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
-+	struct caam_ctx *ctx = crypto_aead_ctx(aead);
-+	unsigned int blocksize = crypto_aead_blocksize(aead);
-+	unsigned int padsize, authsize;
-+	struct caam_aead_alg *alg = container_of(crypto_aead_alg(aead),
-+						 typeof(*alg), aead);
-+	struct device *qidev = ctx->qidev;
-+	gfp_t flags = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
-+		      GFP_KERNEL : GFP_ATOMIC;
-+	int src_nents, mapped_src_nents, dst_nents = 0, mapped_dst_nents = 0;
-+	struct tls_edesc *edesc;
-+	dma_addr_t qm_sg_dma, iv_dma = 0;
-+	int ivsize = 0;
-+	u8 *iv;
-+	int qm_sg_index, qm_sg_ents = 0, qm_sg_bytes;
-+	int in_len, out_len;
-+	struct qm_sg_entry *sg_table, *fd_sgt;
-+	struct caam_drv_ctx *drv_ctx;
-+	struct scatterlist *dst;
-+
-+	if (encrypt) {
-+		padsize = blocksize - ((req->cryptlen + ctx->authsize) %
-+					blocksize);
-+		authsize = ctx->authsize + padsize;
-+	} else {
-+		authsize = ctx->authsize;
-+	}
-+
-+	drv_ctx = get_drv_ctx(ctx, encrypt ? ENCRYPT : DECRYPT);
-+	if (unlikely(IS_ERR_OR_NULL(drv_ctx)))
-+		return (struct tls_edesc *)drv_ctx;
-+
-+	/* allocate space for base edesc, link tables and IV */
-+	edesc = qi_cache_alloc(GFP_DMA | flags);
-+	if (unlikely(!edesc)) {
-+		dev_err(qidev, "could not allocate extended descriptor\n");
-+		return ERR_PTR(-ENOMEM);
-+	}
-+
-+	if (likely(req->src == req->dst)) {
-+		src_nents = sg_nents_for_len(req->src, req->assoclen +
-+					     req->cryptlen +
-+					     (encrypt ? authsize : 0));
-+		if (unlikely(src_nents < 0)) {
-+			dev_err(qidev, "Insufficient bytes (%d) in src S/G\n",
-+				req->assoclen + req->cryptlen +
-+				(encrypt ? authsize : 0));
-+			qi_cache_free(edesc);
-+			return ERR_PTR(src_nents);
-+		}
-+
-+		mapped_src_nents = dma_map_sg(qidev, req->src, src_nents,
-+					      DMA_BIDIRECTIONAL);
-+		if (unlikely(!mapped_src_nents)) {
-+			dev_err(qidev, "unable to map source\n");
-+			qi_cache_free(edesc);
-+			return ERR_PTR(-ENOMEM);
-+		}
-+		dst = req->dst;
-+	} else {
-+		src_nents = sg_nents_for_len(req->src, req->assoclen +
-+					     req->cryptlen);
-+		if (unlikely(src_nents < 0)) {
-+			dev_err(qidev, "Insufficient bytes (%d) in src S/G\n",
-+				req->assoclen + req->cryptlen);
-+			qi_cache_free(edesc);
-+			return ERR_PTR(src_nents);
-+		}
-+
-+		dst = scatterwalk_ffwd(edesc->tmp, req->dst, req->assoclen);
-+		dst_nents = sg_nents_for_len(dst, req->cryptlen +
-+					     (encrypt ? authsize : 0));
-+		if (unlikely(dst_nents < 0)) {
-+			dev_err(qidev, "Insufficient bytes (%d) in dst S/G\n",
-+				req->cryptlen +
-+				(encrypt ? authsize : 0));
-+			qi_cache_free(edesc);
-+			return ERR_PTR(dst_nents);
-+		}
-+
-+		if (src_nents) {
-+			mapped_src_nents = dma_map_sg(qidev, req->src,
-+						      src_nents, DMA_TO_DEVICE);
-+			if (unlikely(!mapped_src_nents)) {
-+				dev_err(qidev, "unable to map source\n");
-+				qi_cache_free(edesc);
-+				return ERR_PTR(-ENOMEM);
-+			}
-+		} else {
-+			mapped_src_nents = 0;
-+		}
-+
-+		mapped_dst_nents = dma_map_sg(qidev, dst, dst_nents,
-+					      DMA_FROM_DEVICE);
-+		if (unlikely(!mapped_dst_nents)) {
-+			dev_err(qidev, "unable to map destination\n");
-+			dma_unmap_sg(qidev, req->src, src_nents, DMA_TO_DEVICE);
-+			qi_cache_free(edesc);
-+			return ERR_PTR(-ENOMEM);
-+		}
-+	}
-+
-+	/*
-+	 * Create S/G table: IV, src, dst.
-+	 * Input is not contiguous.
-+	 */
-+	qm_sg_ents = 1 + mapped_src_nents +
-+		     (mapped_dst_nents > 1 ? mapped_dst_nents : 0);
-+	sg_table = &edesc->sgt[0];
-+	qm_sg_bytes = qm_sg_ents * sizeof(*sg_table);
-+
-+	ivsize = crypto_aead_ivsize(aead);
-+	iv = (u8 *)(sg_table + qm_sg_ents);
-+	/* Make sure IV is located in a DMAable area */
-+	memcpy(iv, req->iv, ivsize);
-+	iv_dma = dma_map_single(qidev, iv, ivsize, DMA_TO_DEVICE);
-+	if (dma_mapping_error(qidev, iv_dma)) {
-+		dev_err(qidev, "unable to map IV\n");
-+		caam_unmap(qidev, req->src, dst, src_nents, dst_nents, 0, 0,
-+			   DMA_NONE, 0, 0);
-+		qi_cache_free(edesc);
-+		return ERR_PTR(-ENOMEM);
-+	}
-+
-+	edesc->src_nents = src_nents;
-+	edesc->dst_nents = dst_nents;
-+	edesc->dst = dst;
-+	edesc->iv_dma = iv_dma;
-+	edesc->drv_req.app_ctx = req;
-+	edesc->drv_req.cbk = tls_done;
-+	edesc->drv_req.drv_ctx = drv_ctx;
-+
-+	dma_to_qm_sg_one(sg_table, iv_dma, ivsize, 0);
-+	qm_sg_index = 1;
-+
-+	sg_to_qm_sg_last(req->src, mapped_src_nents, sg_table + qm_sg_index, 0);
-+	qm_sg_index += mapped_src_nents;
-+
-+	if (mapped_dst_nents > 1)
-+		sg_to_qm_sg_last(dst, mapped_dst_nents, sg_table +
-+				 qm_sg_index, 0);
-+
-+	qm_sg_dma = dma_map_single(qidev, sg_table, qm_sg_bytes, DMA_TO_DEVICE);
-+	if (dma_mapping_error(qidev, qm_sg_dma)) {
-+		dev_err(qidev, "unable to map S/G table\n");
-+		caam_unmap(qidev, req->src, dst, src_nents, dst_nents, iv_dma,
-+			   ivsize, DMA_TO_DEVICE, 0, 0);
-+		qi_cache_free(edesc);
-+		return ERR_PTR(-ENOMEM);
-+	}
-+
-+	edesc->qm_sg_dma = qm_sg_dma;
-+	edesc->qm_sg_bytes = qm_sg_bytes;
-+
-+	out_len = req->cryptlen + (encrypt ? authsize : 0);
-+	in_len = ivsize + req->assoclen + req->cryptlen;
-+
-+	fd_sgt = &edesc->drv_req.fd_sgt[0];
-+
-+	dma_to_qm_sg_one_last_ext(&fd_sgt[1], qm_sg_dma, in_len, 0);
-+
-+	if (req->dst == req->src)
-+		dma_to_qm_sg_one_ext(&fd_sgt[0], qm_sg_dma +
-+				    (sg_nents_for_len(req->src, req->assoclen) +
-+				     1) * sizeof(*sg_table), out_len, 0);
-+	else if (mapped_dst_nents == 1)
-+		dma_to_qm_sg_one(&fd_sgt[0], sg_dma_address(dst), out_len, 0);
-+	else
-+		dma_to_qm_sg_one_ext(&fd_sgt[0], qm_sg_dma + sizeof(*sg_table) *
-+				     qm_sg_index, out_len, 0);
-+
-+	return edesc;
-+}
-+
-+static int tls_crypt(struct aead_request *req, bool encrypt)
-+{
-+	struct tls_edesc *edesc;
-+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
-+	struct caam_ctx *ctx = crypto_aead_ctx(aead);
-+	int ret;
-+
-+	if (unlikely(caam_congested))
-+		return -EAGAIN;
-+
-+	edesc = tls_edesc_alloc(req, encrypt);
-+	if (IS_ERR_OR_NULL(edesc))
-+		return PTR_ERR(edesc);
-+
-+	ret = caam_qi_enqueue(ctx->qidev, &edesc->drv_req);
-+	if (!ret) {
-+		ret = -EINPROGRESS;
-+	} else {
-+		tls_unmap(ctx->qidev, edesc, req);
-+		qi_cache_free(edesc);
-+	}
-+
-+	return ret;
-+}
-+
-+static int tls_encrypt(struct aead_request *req)
-+{
-+	return tls_crypt(req, true);
-+}
-+
-+static int tls_decrypt(struct aead_request *req)
-+{
-+	return tls_crypt(req, false);
-+}
-+
- static int ipsec_gcm_encrypt(struct aead_request *req)
- {
- 	return crypto_ipsec_check_assoclen(req->assoclen) ? : aead_crypt(req,
-@@ -2446,6 +2879,26 @@ static struct caam_aead_alg driver_aeads
- 			.geniv = true,
- 		}
- 	},
-+	{
-+		.aead = {
-+			.base = {
-+				.cra_name = "tls10(hmac(sha1),cbc(aes))",
-+				.cra_driver_name = "tls10-hmac-sha1-cbc-aes-caam-qi",
-+				.cra_blocksize = AES_BLOCK_SIZE,
-+			},
-+			.setkey = tls_setkey,
-+			.setauthsize = tls_setauthsize,
-+			.encrypt = tls_encrypt,
-+			.decrypt = tls_decrypt,
-+			.ivsize = AES_BLOCK_SIZE,
-+			.maxauthsize = SHA1_DIGEST_SIZE,
-+		},
-+		.caam = {
-+			.class1_alg_type = OP_ALG_ALGSEL_AES | OP_ALG_AAI_CBC,
-+			.class2_alg_type = OP_ALG_ALGSEL_SHA1 |
-+					   OP_ALG_AAI_HMAC_PRECOMP,
-+		}
-+	}
- };
- 
- static int caam_init_common(struct caam_ctx *ctx, struct caam_alg_entry *caam,
-@@ -2453,6 +2906,16 @@ static int caam_init_common(struct caam_
- {
- 	struct caam_drv_private *priv;
- 	struct device *dev;
-+	/* Digest sizes for MD5, SHA1, SHA-224, SHA-256, SHA-384, SHA-512 */
-+	static const u8 digest_size[] = {
-+		MD5_DIGEST_SIZE,
-+		SHA1_DIGEST_SIZE,
-+		SHA224_DIGEST_SIZE,
-+		SHA256_DIGEST_SIZE,
-+		SHA384_DIGEST_SIZE,
-+		SHA512_DIGEST_SIZE
-+	};
-+	u8 op_id;
- 
- 	/*
- 	 * distribute tfms across job rings to ensure in-order
-@@ -2484,6 +2947,21 @@ static int caam_init_common(struct caam_
- 	ctx->adata.algtype = OP_TYPE_CLASS2_ALG | caam->class2_alg_type;
- 
- 	ctx->qidev = dev;
-+	if (ctx->adata.algtype) {
-+		op_id = (ctx->adata.algtype & OP_ALG_ALGSEL_SUBMASK)
-+				>> OP_ALG_ALGSEL_SHIFT;
-+		if (op_id < ARRAY_SIZE(digest_size)) {
-+			ctx->authsize = digest_size[op_id];
-+		} else {
-+			dev_err(ctx->jrdev,
-+				"incorrect op_id %d; must be less than %zu\n",
-+				op_id, ARRAY_SIZE(digest_size));
-+			caam_jr_free(ctx->jrdev);
-+			return -EINVAL;
-+		}
-+	} else {
-+		ctx->authsize = 0;
-+	}
- 
- 	spin_lock_init(&ctx->lock);
- 	ctx->drv_ctx[ENCRYPT] = NULL;
---- a/drivers/crypto/caam/desc.h
-+++ b/drivers/crypto/caam/desc.h
-@@ -1704,4 +1704,31 @@
- /* Frame Descriptor Command for Replacement Job Descriptor */
- #define FD_CMD_REPLACE_JOB_DESC				0x20000000
- 
-+/* CHA Control Register bits */
-+#define CCTRL_RESET_CHA_ALL          0x1
-+#define CCTRL_RESET_CHA_AESA         0x2
-+#define CCTRL_RESET_CHA_DESA         0x4
-+#define CCTRL_RESET_CHA_AFHA         0x8
-+#define CCTRL_RESET_CHA_KFHA         0x10
-+#define CCTRL_RESET_CHA_SF8A         0x20
-+#define CCTRL_RESET_CHA_PKHA         0x40
-+#define CCTRL_RESET_CHA_MDHA         0x80
-+#define CCTRL_RESET_CHA_CRCA         0x100
-+#define CCTRL_RESET_CHA_RNG          0x200
-+#define CCTRL_RESET_CHA_SF9A         0x400
-+#define CCTRL_RESET_CHA_ZUCE         0x800
-+#define CCTRL_RESET_CHA_ZUCA         0x1000
-+#define CCTRL_UNLOAD_PK_A0           0x10000
-+#define CCTRL_UNLOAD_PK_A1           0x20000
-+#define CCTRL_UNLOAD_PK_A2           0x40000
-+#define CCTRL_UNLOAD_PK_A3           0x80000
-+#define CCTRL_UNLOAD_PK_B0           0x100000
-+#define CCTRL_UNLOAD_PK_B1           0x200000
-+#define CCTRL_UNLOAD_PK_B2           0x400000
-+#define CCTRL_UNLOAD_PK_B3           0x800000
-+#define CCTRL_UNLOAD_PK_N            0x1000000
-+#define CCTRL_UNLOAD_PK_A            0x4000000
-+#define CCTRL_UNLOAD_PK_B            0x8000000
-+#define CCTRL_UNLOAD_SBOX            0x10000000
-+
- #endif /* DESC_H */
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0029-crypto-caam-qi2-add-support-for-TLS-1.0-record.patch b/target/linux/layerscape/patches-5.4/804-crypto-0029-crypto-caam-qi2-add-support-for-TLS-1.0-record.patch
deleted file mode 100644
index 034c623b34..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0029-crypto-caam-qi2-add-support-for-TLS-1.0-record.patch
+++ /dev/null
@@ -1,545 +0,0 @@
-From a97159ba48984bfec10abcea3a0215cf3deff153 Mon Sep 17 00:00:00 2001
-From: Radu Alexe <radu.alexe@nxp.com>
-Date: Fri, 9 Jun 2017 14:49:17 +0300
-Subject: [PATCH] crypto: caam/qi2 - add support for TLS 1.0 record
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-TLS 1.0 descriptors run on SEC 4.x or higher. For now, only
-tls10(hmac(sha1),cbc(aes)) algorithm is registered by the driver.
-
-Known limitations:
- - when src == dst - there should be no element in the src scatterlist
-   array that contains both associated data and message data.
- - when src != dst - associated data is not copied from source into
-   destination.
- - for decryption when src != dst the size of the destination should be
-   large enough so that the buffer may contain the decrypted authenc and
-padded data.
-
-Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/caamalg_qi2.c | 450 ++++++++++++++++++++++++++++++++++++++
- drivers/crypto/caam/caamalg_qi2.h |  22 ++
- 2 files changed, 472 insertions(+)
-
---- a/drivers/crypto/caam/caamalg_qi2.c
-+++ b/drivers/crypto/caam/caamalg_qi2.c
-@@ -583,6 +583,257 @@ skip_out_fle:
- 	return edesc;
- }
- 
-+static struct tls_edesc *tls_edesc_alloc(struct aead_request *req,
-+					 bool encrypt)
-+{
-+	struct crypto_aead *tls = crypto_aead_reqtfm(req);
-+	unsigned int blocksize = crypto_aead_blocksize(tls);
-+	unsigned int padsize, authsize;
-+	struct caam_request *req_ctx = aead_request_ctx(req);
-+	struct dpaa2_fl_entry *in_fle = &req_ctx->fd_flt[1];
-+	struct dpaa2_fl_entry *out_fle = &req_ctx->fd_flt[0];
-+	struct caam_ctx *ctx = crypto_aead_ctx(tls);
-+	struct caam_aead_alg *alg = container_of(crypto_aead_alg(tls),
-+						 typeof(*alg), aead);
-+	struct device *dev = ctx->dev;
-+	gfp_t flags = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
-+		      GFP_KERNEL : GFP_ATOMIC;
-+	int src_nents, mapped_src_nents, dst_nents = 0, mapped_dst_nents = 0;
-+	struct tls_edesc *edesc;
-+	dma_addr_t qm_sg_dma, iv_dma = 0;
-+	int ivsize = 0;
-+	u8 *iv;
-+	int qm_sg_index, qm_sg_ents = 0, qm_sg_bytes;
-+	int in_len, out_len;
-+	struct dpaa2_sg_entry *sg_table;
-+	struct scatterlist *dst;
-+
-+	if (encrypt) {
-+		padsize = blocksize - ((req->cryptlen + ctx->authsize) %
-+					blocksize);
-+		authsize = ctx->authsize + padsize;
-+	} else {
-+		authsize = ctx->authsize;
-+	}
-+
-+	/* allocate space for base edesc, link tables and IV */
-+	edesc = qi_cache_zalloc(GFP_DMA | flags);
-+	if (unlikely(!edesc)) {
-+		dev_err(dev, "could not allocate extended descriptor\n");
-+		return ERR_PTR(-ENOMEM);
-+	}
-+
-+	if (likely(req->src == req->dst)) {
-+		src_nents = sg_nents_for_len(req->src, req->assoclen +
-+					     req->cryptlen +
-+					     (encrypt ? authsize : 0));
-+		if (unlikely(src_nents < 0)) {
-+			dev_err(dev, "Insufficient bytes (%d) in src S/G\n",
-+				req->assoclen + req->cryptlen +
-+				(encrypt ? authsize : 0));
-+			qi_cache_free(edesc);
-+			return ERR_PTR(src_nents);
-+		}
-+
-+		mapped_src_nents = dma_map_sg(dev, req->src, src_nents,
-+					      DMA_BIDIRECTIONAL);
-+		if (unlikely(!mapped_src_nents)) {
-+			dev_err(dev, "unable to map source\n");
-+			qi_cache_free(edesc);
-+			return ERR_PTR(-ENOMEM);
-+		}
-+		dst = req->dst;
-+	} else {
-+		src_nents = sg_nents_for_len(req->src, req->assoclen +
-+					     req->cryptlen);
-+		if (unlikely(src_nents < 0)) {
-+			dev_err(dev, "Insufficient bytes (%d) in src S/G\n",
-+				req->assoclen + req->cryptlen);
-+			qi_cache_free(edesc);
-+			return ERR_PTR(src_nents);
-+		}
-+
-+		dst = scatterwalk_ffwd(edesc->tmp, req->dst, req->assoclen);
-+		dst_nents = sg_nents_for_len(dst, req->cryptlen +
-+					     (encrypt ? authsize : 0));
-+		if (unlikely(dst_nents < 0)) {
-+			dev_err(dev, "Insufficient bytes (%d) in dst S/G\n",
-+				req->cryptlen +
-+				(encrypt ? authsize : 0));
-+			qi_cache_free(edesc);
-+			return ERR_PTR(dst_nents);
-+		}
-+
-+		if (src_nents) {
-+			mapped_src_nents = dma_map_sg(dev, req->src,
-+						      src_nents, DMA_TO_DEVICE);
-+			if (unlikely(!mapped_src_nents)) {
-+				dev_err(dev, "unable to map source\n");
-+				qi_cache_free(edesc);
-+				return ERR_PTR(-ENOMEM);
-+			}
-+		} else {
-+			mapped_src_nents = 0;
-+		}
-+
-+		mapped_dst_nents = dma_map_sg(dev, dst, dst_nents,
-+					      DMA_FROM_DEVICE);
-+		if (unlikely(!mapped_dst_nents)) {
-+			dev_err(dev, "unable to map destination\n");
-+			dma_unmap_sg(dev, req->src, src_nents, DMA_TO_DEVICE);
-+			qi_cache_free(edesc);
-+			return ERR_PTR(-ENOMEM);
-+		}
-+	}
-+
-+	/*
-+	 * Create S/G table: IV, src, dst.
-+	 * Input is not contiguous.
-+	 */
-+	qm_sg_ents = 1 + mapped_src_nents +
-+		     (mapped_dst_nents > 1 ? mapped_dst_nents : 0);
-+	sg_table = &edesc->sgt[0];
-+	qm_sg_bytes = qm_sg_ents * sizeof(*sg_table);
-+
-+	ivsize = crypto_aead_ivsize(tls);
-+	iv = (u8 *)(sg_table + qm_sg_ents);
-+	/* Make sure IV is located in a DMAable area */
-+	memcpy(iv, req->iv, ivsize);
-+	iv_dma = dma_map_single(dev, iv, ivsize, DMA_TO_DEVICE);
-+	if (dma_mapping_error(dev, iv_dma)) {
-+		dev_err(dev, "unable to map IV\n");
-+		caam_unmap(dev, req->src, dst, src_nents, dst_nents, 0, 0,
-+		DMA_NONE, 0, 0);
-+		qi_cache_free(edesc);
-+		return ERR_PTR(-ENOMEM);
-+	}
-+
-+	edesc->src_nents = src_nents;
-+	edesc->dst_nents = dst_nents;
-+	edesc->dst = dst;
-+	edesc->iv_dma = iv_dma;
-+
-+	dma_to_qm_sg_one(sg_table, iv_dma, ivsize, 0);
-+	qm_sg_index = 1;
-+
-+	sg_to_qm_sg_last(req->src, mapped_src_nents, sg_table + qm_sg_index, 0);
-+	qm_sg_index += mapped_src_nents;
-+
-+	if (mapped_dst_nents > 1)
-+		sg_to_qm_sg_last(dst, mapped_dst_nents, sg_table +
-+				 qm_sg_index, 0);
-+
-+	qm_sg_dma = dma_map_single(dev, sg_table, qm_sg_bytes, DMA_TO_DEVICE);
-+	if (dma_mapping_error(dev, qm_sg_dma)) {
-+		dev_err(dev, "unable to map S/G table\n");
-+		caam_unmap(dev, req->src, dst, src_nents, dst_nents, iv_dma,
-+			   ivsize, DMA_TO_DEVICE, 0, 0);
-+		qi_cache_free(edesc);
-+		return ERR_PTR(-ENOMEM);
-+	}
-+
-+	edesc->qm_sg_dma = qm_sg_dma;
-+	edesc->qm_sg_bytes = qm_sg_bytes;
-+
-+	out_len = req->cryptlen + (encrypt ? authsize : 0);
-+	in_len = ivsize + req->assoclen + req->cryptlen;
-+
-+	memset(&req_ctx->fd_flt, 0, sizeof(req_ctx->fd_flt));
-+	dpaa2_fl_set_final(in_fle, true);
-+	dpaa2_fl_set_format(in_fle, dpaa2_fl_sg);
-+	dpaa2_fl_set_addr(in_fle, qm_sg_dma);
-+	dpaa2_fl_set_len(in_fle, in_len);
-+
-+	if (req->dst == req->src) {
-+		dpaa2_fl_set_format(out_fle, dpaa2_fl_sg);
-+		dpaa2_fl_set_addr(out_fle, qm_sg_dma +
-+				  (sg_nents_for_len(req->src, req->assoclen) +
-+				   1) * sizeof(*sg_table));
-+	} else if (mapped_dst_nents == 1) {
-+		dpaa2_fl_set_format(out_fle, dpaa2_fl_single);
-+		dpaa2_fl_set_addr(out_fle, sg_dma_address(dst));
-+	} else {
-+		dpaa2_fl_set_format(out_fle, dpaa2_fl_sg);
-+		dpaa2_fl_set_addr(out_fle, qm_sg_dma + qm_sg_index *
-+				  sizeof(*sg_table));
-+	}
-+
-+	dpaa2_fl_set_len(out_fle, out_len);
-+
-+	return edesc;
-+}
-+
-+static int tls_set_sh_desc(struct crypto_aead *tls)
-+{
-+	struct caam_ctx *ctx = crypto_aead_ctx(tls);
-+	unsigned int ivsize = crypto_aead_ivsize(tls);
-+	unsigned int blocksize = crypto_aead_blocksize(tls);
-+	struct device *dev = ctx->dev;
-+	struct dpaa2_caam_priv *priv = dev_get_drvdata(dev);
-+	struct caam_flc *flc;
-+	u32 *desc;
-+	unsigned int assoclen = 13; /* always 13 bytes for TLS */
-+	unsigned int data_len[2];
-+	u32 inl_mask;
-+
-+	if (!ctx->cdata.keylen || !ctx->authsize)
-+		return 0;
-+
-+	/*
-+	 * TLS 1.0 encrypt shared descriptor
-+	 * Job Descriptor and Shared Descriptor
-+	 * must fit into the 64-word Descriptor h/w Buffer
-+	 */
-+	data_len[0] = ctx->adata.keylen_pad;
-+	data_len[1] = ctx->cdata.keylen;
-+
-+	if (desc_inline_query(DESC_TLS10_ENC_LEN, DESC_JOB_IO_LEN, data_len,
-+			      &inl_mask, ARRAY_SIZE(data_len)) < 0)
-+		return -EINVAL;
-+
-+	if (inl_mask & 1)
-+		ctx->adata.key_virt = ctx->key;
-+	else
-+		ctx->adata.key_dma = ctx->key_dma;
-+
-+	if (inl_mask & 2)
-+		ctx->cdata.key_virt = ctx->key + ctx->adata.keylen_pad;
-+	else
-+		ctx->cdata.key_dma = ctx->key_dma + ctx->adata.keylen_pad;
-+
-+	ctx->adata.key_inline = !!(inl_mask & 1);
-+	ctx->cdata.key_inline = !!(inl_mask & 2);
-+
-+	flc = &ctx->flc[ENCRYPT];
-+	desc = flc->sh_desc;
-+	cnstr_shdsc_tls_encap(desc, &ctx->cdata, &ctx->adata,
-+			      assoclen, ivsize, ctx->authsize, blocksize,
-+			      priv->sec_attr.era);
-+	flc->flc[1] = cpu_to_caam32(desc_len(desc));
-+	dma_sync_single_for_device(dev, ctx->flc_dma[ENCRYPT],
-+				   sizeof(flc->flc) + desc_bytes(desc),
-+				   ctx->dir);
-+
-+	/*
-+	 * TLS 1.0 decrypt shared descriptor
-+	 * Keys do not fit inline, regardless of algorithms used
-+	 */
-+	ctx->adata.key_inline = false;
-+	ctx->adata.key_dma = ctx->key_dma;
-+	ctx->cdata.key_dma = ctx->key_dma + ctx->adata.keylen_pad;
-+
-+	flc = &ctx->flc[DECRYPT];
-+	desc = flc->sh_desc;
-+	cnstr_shdsc_tls_decap(desc, &ctx->cdata, &ctx->adata, assoclen, ivsize,
-+			      ctx->authsize, blocksize, priv->sec_attr.era);
-+	flc->flc[1] = cpu_to_caam32(desc_len(desc));
-+	dma_sync_single_for_device(dev, ctx->flc_dma[DECRYPT],
-+				   sizeof(flc->flc) + desc_bytes(desc),
-+				   ctx->dir);
-+
-+	return 0;
-+}
-+
- static int chachapoly_set_sh_desc(struct crypto_aead *aead)
- {
- 	struct caam_ctx *ctx = crypto_aead_ctx(aead);
-@@ -627,6 +878,61 @@ static int chachapoly_setauthsize(struct
- 	return chachapoly_set_sh_desc(aead);
- }
- 
-+static int tls_setkey(struct crypto_aead *tls, const u8 *key,
-+		      unsigned int keylen)
-+{
-+	struct caam_ctx *ctx = crypto_aead_ctx(tls);
-+	struct device *dev = ctx->dev;
-+	struct crypto_authenc_keys keys;
-+
-+	if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
-+		goto badkey;
-+
-+#ifdef DEBUG
-+	dev_err(dev, "keylen %d enckeylen %d authkeylen %d\n",
-+		keys.authkeylen + keys.enckeylen, keys.enckeylen,
-+		keys.authkeylen);
-+	print_hex_dump(KERN_ERR, "key in @" __stringify(__LINE__)": ",
-+		       DUMP_PREFIX_ADDRESS, 16, 4, key, keylen, 1);
-+#endif
-+
-+	ctx->adata.keylen = keys.authkeylen;
-+	ctx->adata.keylen_pad = split_key_len(ctx->adata.algtype &
-+					      OP_ALG_ALGSEL_MASK);
-+
-+	if (ctx->adata.keylen_pad + keys.enckeylen > CAAM_MAX_KEY_SIZE)
-+		goto badkey;
-+
-+	memcpy(ctx->key, keys.authkey, keys.authkeylen);
-+	memcpy(ctx->key + ctx->adata.keylen_pad, keys.enckey, keys.enckeylen);
-+	dma_sync_single_for_device(dev, ctx->key_dma, ctx->adata.keylen_pad +
-+				   keys.enckeylen, ctx->dir);
-+#ifdef DEBUG
-+	print_hex_dump(KERN_ERR, "ctx.key@" __stringify(__LINE__)": ",
-+		       DUMP_PREFIX_ADDRESS, 16, 4, ctx->key,
-+		       ctx->adata.keylen_pad + keys.enckeylen, 1);
-+#endif
-+
-+	ctx->cdata.keylen = keys.enckeylen;
-+
-+	memzero_explicit(&keys, sizeof(keys));
-+	return tls_set_sh_desc(tls);
-+badkey:
-+	crypto_aead_set_flags(tls, CRYPTO_TFM_RES_BAD_KEY_LEN);
-+	memzero_explicit(&keys, sizeof(keys));
-+	return -EINVAL;
-+}
-+
-+static int tls_setauthsize(struct crypto_aead *tls, unsigned int authsize)
-+{
-+	struct caam_ctx *ctx = crypto_aead_ctx(tls);
-+
-+	ctx->authsize = authsize;
-+	tls_set_sh_desc(tls);
-+
-+	return 0;
-+}
-+
- static int chachapoly_setkey(struct crypto_aead *aead, const u8 *key,
- 			     unsigned int keylen)
- {
-@@ -1274,6 +1580,17 @@ static void aead_unmap(struct device *de
- 	dma_unmap_single(dev, edesc->assoclen_dma, 4, DMA_TO_DEVICE);
- }
- 
-+static void tls_unmap(struct device *dev, struct tls_edesc *edesc,
-+		      struct aead_request *req)
-+{
-+	struct crypto_aead *tls = crypto_aead_reqtfm(req);
-+	int ivsize = crypto_aead_ivsize(tls);
-+
-+	caam_unmap(dev, req->src, edesc->dst, edesc->src_nents,
-+		   edesc->dst_nents, edesc->iv_dma, ivsize, DMA_TO_DEVICE,
-+		   edesc->qm_sg_dma, edesc->qm_sg_bytes);
-+}
-+
- static void skcipher_unmap(struct device *dev, struct skcipher_edesc *edesc,
- 			   struct skcipher_request *req)
- {
-@@ -1383,6 +1700,119 @@ static int aead_decrypt(struct aead_requ
- 	return ret;
- }
- 
-+static void tls_encrypt_done(void *cbk_ctx, u32 status)
-+{
-+	struct crypto_async_request *areq = cbk_ctx;
-+	struct aead_request *req = container_of(areq, struct aead_request,
-+						base);
-+	struct caam_request *req_ctx = to_caam_req(areq);
-+	struct tls_edesc *edesc = req_ctx->edesc;
-+	struct crypto_aead *tls = crypto_aead_reqtfm(req);
-+	struct caam_ctx *ctx = crypto_aead_ctx(tls);
-+	int ecode = 0;
-+
-+#ifdef DEBUG
-+	dev_err(ctx->dev, "%s %d: err 0x%x\n", __func__, __LINE__, status);
-+#endif
-+
-+	if (unlikely(status)) {
-+		caam_qi2_strstatus(ctx->dev, status);
-+		ecode = -EIO;
-+	}
-+
-+	tls_unmap(ctx->dev, edesc, req);
-+	qi_cache_free(edesc);
-+	aead_request_complete(req, ecode);
-+}
-+
-+static void tls_decrypt_done(void *cbk_ctx, u32 status)
-+{
-+	struct crypto_async_request *areq = cbk_ctx;
-+	struct aead_request *req = container_of(areq, struct aead_request,
-+						base);
-+	struct caam_request *req_ctx = to_caam_req(areq);
-+	struct tls_edesc *edesc = req_ctx->edesc;
-+	struct crypto_aead *tls = crypto_aead_reqtfm(req);
-+	struct caam_ctx *ctx = crypto_aead_ctx(tls);
-+	int ecode = 0;
-+
-+#ifdef DEBUG
-+	dev_err(ctx->dev, "%s %d: err 0x%x\n", __func__, __LINE__, status);
-+#endif
-+
-+	if (unlikely(status)) {
-+		caam_qi2_strstatus(ctx->dev, status);
-+		/*
-+		 * verify hw auth check passed else return -EBADMSG
-+		 */
-+		if ((status & JRSTA_CCBERR_ERRID_MASK) ==
-+		     JRSTA_CCBERR_ERRID_ICVCHK)
-+			ecode = -EBADMSG;
-+		else
-+			ecode = -EIO;
-+	}
-+
-+	tls_unmap(ctx->dev, edesc, req);
-+	qi_cache_free(edesc);
-+	aead_request_complete(req, ecode);
-+}
-+
-+static int tls_encrypt(struct aead_request *req)
-+{
-+	struct tls_edesc *edesc;
-+	struct crypto_aead *tls = crypto_aead_reqtfm(req);
-+	struct caam_ctx *ctx = crypto_aead_ctx(tls);
-+	struct caam_request *caam_req = aead_request_ctx(req);
-+	int ret;
-+
-+	/* allocate extended descriptor */
-+	edesc = tls_edesc_alloc(req, true);
-+	if (IS_ERR(edesc))
-+		return PTR_ERR(edesc);
-+
-+	caam_req->flc = &ctx->flc[ENCRYPT];
-+	caam_req->flc_dma = ctx->flc_dma[ENCRYPT];
-+	caam_req->cbk = tls_encrypt_done;
-+	caam_req->ctx = &req->base;
-+	caam_req->edesc = edesc;
-+	ret = dpaa2_caam_enqueue(ctx->dev, caam_req);
-+	if (ret != -EINPROGRESS &&
-+	    !(ret == -EBUSY && req->base.flags & CRYPTO_TFM_REQ_MAY_BACKLOG)) {
-+		tls_unmap(ctx->dev, edesc, req);
-+		qi_cache_free(edesc);
-+	}
-+
-+	return ret;
-+}
-+
-+static int tls_decrypt(struct aead_request *req)
-+{
-+	struct tls_edesc *edesc;
-+	struct crypto_aead *tls = crypto_aead_reqtfm(req);
-+	struct caam_ctx *ctx = crypto_aead_ctx(tls);
-+	struct caam_request *caam_req = aead_request_ctx(req);
-+	int ret;
-+
-+	/* allocate extended descriptor */
-+	edesc = tls_edesc_alloc(req, false);
-+	if (IS_ERR(edesc))
-+		return PTR_ERR(edesc);
-+
-+	caam_req->flc = &ctx->flc[DECRYPT];
-+	caam_req->flc_dma = ctx->flc_dma[DECRYPT];
-+	caam_req->cbk = tls_decrypt_done;
-+	caam_req->ctx = &req->base;
-+	caam_req->edesc = edesc;
-+	ret = dpaa2_caam_enqueue(ctx->dev, caam_req);
-+	if (ret != -EINPROGRESS &&
-+	    !(ret == -EBUSY && req->base.flags & CRYPTO_TFM_REQ_MAY_BACKLOG)) {
-+		tls_unmap(ctx->dev, edesc, req);
-+		qi_cache_free(edesc);
-+	}
-+
-+	return ret;
-+}
-+
- static int ipsec_gcm_encrypt(struct aead_request *req)
- {
- 	return crypto_ipsec_check_assoclen(req->assoclen) ? : aead_encrypt(req);
-@@ -2929,6 +3359,26 @@ static struct caam_aead_alg driver_aeads
- 			.geniv = true,
- 		},
- 	},
-+	{
-+		.aead = {
-+			.base = {
-+				.cra_name = "tls10(hmac(sha1),cbc(aes))",
-+				.cra_driver_name = "tls10-hmac-sha1-cbc-aes-caam-qi2",
-+				.cra_blocksize = AES_BLOCK_SIZE,
-+			},
-+			.setkey = tls_setkey,
-+			.setauthsize = tls_setauthsize,
-+			.encrypt = tls_encrypt,
-+			.decrypt = tls_decrypt,
-+			.ivsize = AES_BLOCK_SIZE,
-+			.maxauthsize = SHA1_DIGEST_SIZE,
-+		},
-+		.caam = {
-+			.class1_alg_type = OP_ALG_ALGSEL_AES | OP_ALG_AAI_CBC,
-+			.class2_alg_type = OP_ALG_ALGSEL_SHA1 |
-+					   OP_ALG_AAI_HMAC_PRECOMP,
-+		},
-+	},
- };
- 
- static void caam_skcipher_alg_init(struct caam_skcipher_alg *t_alg)
---- a/drivers/crypto/caam/caamalg_qi2.h
-+++ b/drivers/crypto/caam/caamalg_qi2.h
-@@ -118,6 +118,28 @@ struct aead_edesc {
- };
- 
- /*
-+ * tls_edesc - s/w-extended tls descriptor
-+ * @src_nents: number of segments in input scatterlist
-+ * @dst_nents: number of segments in output scatterlist
-+ * @iv_dma: dma address of iv for checking continuity and link table
-+ * @qm_sg_bytes: length of dma mapped h/w link table
-+ * @qm_sg_dma: bus physical mapped address of h/w link table
-+ * @tmp: array of scatterlists used by 'scatterwalk_ffwd'
-+ * @dst: pointer to output scatterlist, usefull for unmapping
-+ * @sgt: the h/w link table, followed by IV
-+ */
-+struct tls_edesc {
-+	int src_nents;
-+	int dst_nents;
-+	dma_addr_t iv_dma;
-+	int qm_sg_bytes;
-+	dma_addr_t qm_sg_dma;
-+	struct scatterlist tmp[2];
-+	struct scatterlist *dst;
-+	struct dpaa2_sg_entry sgt[0];
-+};
-+
-+/*
-  * skcipher_edesc - s/w-extended skcipher descriptor
-  * @src_nents: number of segments in input scatterlist
-  * @dst_nents: number of segments in output scatterlist
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0030-crypto-caam-add-functionality-used-by-the-caam_dma-d.patch b/target/linux/layerscape/patches-5.4/804-crypto-0030-crypto-caam-add-functionality-used-by-the-caam_dma-d.patch
deleted file mode 100644
index 6e4323987a..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0030-crypto-caam-add-functionality-used-by-the-caam_dma-d.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From 20f552cafd7dda6f5d25128bbc04ea2c91d9f5d1 Mon Sep 17 00:00:00 2001
-From: Radu Alexe <radu.alexe@nxp.com>
-Date: Thu, 26 Oct 2017 10:45:14 +0300
-Subject: [PATCH] crypto: caam - add functionality used by the caam_dma driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The caam_dma is a memcpy DMA driver based on the DMA functionality of
-the CAAM hardware block. It creates a DMA channel for each JR of the
-CAAM. This patch adds functionality that is used by the caam_dma that is
-not yet part of the JR driver.
-
-Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/desc.h |  2 ++
- drivers/crypto/caam/jr.c   | 41 +++++++++++++++++++++++++++++++++++++++++
- drivers/crypto/caam/jr.h   |  2 ++
- 3 files changed, 45 insertions(+)
-
---- a/drivers/crypto/caam/desc.h
-+++ b/drivers/crypto/caam/desc.h
-@@ -364,6 +364,7 @@
- #define FIFOLD_TYPE_PK_N	(0x08 << FIFOLD_TYPE_SHIFT)
- #define FIFOLD_TYPE_PK_A	(0x0c << FIFOLD_TYPE_SHIFT)
- #define FIFOLD_TYPE_PK_B	(0x0d << FIFOLD_TYPE_SHIFT)
-+#define FIFOLD_TYPE_IFIFO	(0x0f << FIFOLD_TYPE_SHIFT)
- 
- /* Other types. Need to OR in last/flush bits as desired */
- #define FIFOLD_TYPE_MSG_MASK	(0x38 << FIFOLD_TYPE_SHIFT)
-@@ -1522,6 +1523,7 @@
- #define MATH_SRC1_INFIFO	(0x0a << MATH_SRC1_SHIFT)
- #define MATH_SRC1_OUTFIFO	(0x0b << MATH_SRC1_SHIFT)
- #define MATH_SRC1_ONE		(0x0c << MATH_SRC1_SHIFT)
-+#define MATH_SRC1_ZERO		(0x0f << MATH_SRC1_SHIFT)
- 
- /* Destination selectors */
- #define MATH_DEST_SHIFT		8
---- a/drivers/crypto/caam/jr.c
-+++ b/drivers/crypto/caam/jr.c
-@@ -62,6 +62,14 @@ algs_unlock:
- 	mutex_unlock(&algs_lock);
- }
- 
-+static int jr_driver_probed;
-+
-+int caam_jr_driver_probed(void)
-+{
-+	return jr_driver_probed;
-+}
-+EXPORT_SYMBOL(caam_jr_driver_probed);
-+
- static int caam_reset_hw_jr(struct device *dev)
- {
- 	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
-@@ -147,6 +155,8 @@ static int caam_jr_remove(struct platfor
- 	if (ret)
- 		dev_err(jrdev, "Failed to shut down job ring\n");
- 
-+	jr_driver_probed--;
-+
- 	return ret;
- }
- 
-@@ -311,6 +321,36 @@ struct device *caam_jr_alloc(void)
- EXPORT_SYMBOL(caam_jr_alloc);
- 
- /**
-+ * caam_jridx_alloc() - Alloc a specific job ring based on its index.
-+ *
-+ * returns :  pointer to the newly allocated physical
-+ *	      JobR dev can be written to if successful.
-+ **/
-+struct device *caam_jridx_alloc(int idx)
-+{
-+	struct caam_drv_private_jr *jrpriv;
-+	struct device *dev = ERR_PTR(-ENODEV);
-+
-+	spin_lock(&driver_data.jr_alloc_lock);
-+
-+	if (list_empty(&driver_data.jr_list))
-+		goto end;
-+
-+	list_for_each_entry(jrpriv, &driver_data.jr_list, list_node) {
-+		if (jrpriv->ridx == idx) {
-+			atomic_inc(&jrpriv->tfm_count);
-+			dev = jrpriv->dev;
-+			break;
-+		}
-+	}
-+
-+end:
-+	spin_unlock(&driver_data.jr_alloc_lock);
-+	return dev;
-+}
-+EXPORT_SYMBOL(caam_jridx_alloc);
-+
-+/**
-  * caam_jr_free() - Free the Job Ring
-  * @rdev     - points to the dev that identifies the Job ring to
-  *             be released.
-@@ -565,6 +605,7 @@ static int caam_jr_probe(struct platform
- 	device_set_wakeup_enable(&pdev->dev, false);
- 
- 	register_algs(jrdev->parent);
-+	jr_driver_probed++;
- 
- 	return 0;
- }
---- a/drivers/crypto/caam/jr.h
-+++ b/drivers/crypto/caam/jr.h
-@@ -9,7 +9,9 @@
- #define JR_H
- 
- /* Prototypes for backend-level services exposed to APIs */
-+int caam_jr_driver_probed(void);
- struct device *caam_jr_alloc(void);
-+struct device *caam_jridx_alloc(int idx);
- void caam_jr_free(struct device *rdev);
- int caam_jr_enqueue(struct device *dev, u32 *desc,
- 		    void (*cbk)(struct device *dev, u32 *desc, u32 status,
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0031-crypto-caam-add-caam_dma-device-on-caam_probe.patch b/target/linux/layerscape/patches-5.4/804-crypto-0031-crypto-caam-add-caam_dma-device-on-caam_probe.patch
deleted file mode 100644
index 1dca71c064..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0031-crypto-caam-add-caam_dma-device-on-caam_probe.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 0547020c73ab7a457f3e1601ef822b61f0b963b9 Mon Sep 17 00:00:00 2001
-From: Radu Alexe <radu.alexe@nxp.com>
-Date: Wed, 8 Nov 2017 17:22:12 +0200
-Subject: [PATCH] crypto: caam - add caam_dma device on caam_probe
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Dynamically create a platform device for the caam_dma driver
-at caam_probe() time.
-
-Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
-
-Use devres for caam_dma platform device unregistering.
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/crypto/caam/ctrl.c | 24 ++++++++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -566,12 +566,22 @@ static void caam_remove_debugfs(void *ro
- }
- #endif
- 
-+static void caam_dma_dev_unregister(void *data)
-+{
-+	platform_device_unregister(data);
-+}
-+
- /* Probe routine for CAAM top (controller) level */
- static int caam_probe(struct platform_device *pdev)
- {
- 	int ret, ring, gen_sk, ent_delay = RTSDCTL_ENT_DLY_MIN;
- 	u64 caam_id;
- 	const struct soc_device_attribute *imx_soc_match;
-+	static struct platform_device_info caam_dma_pdev_info = {
-+		.name = "caam-dma",
-+		.id = PLATFORM_DEVID_NONE
-+	};
-+	static struct platform_device *caam_dma_dev;
- 	struct device *dev;
- 	struct device_node *nprop, *np;
- 	struct resource res_regs;
-@@ -849,6 +859,20 @@ set_dma_mask:
- 		return -ENOMEM;
- 	}
- 
-+	caam_dma_pdev_info.parent = dev;
-+	caam_dma_pdev_info.dma_mask = dma_get_mask(dev);
-+	caam_dma_dev = platform_device_register_full(&caam_dma_pdev_info);
-+	if (IS_ERR(caam_dma_dev)) {
-+		dev_err(dev, "Unable to create and register caam-dma dev\n");
-+		return PTR_ERR(caam_dma_dev);
-+	} else {
-+		set_dma_ops(&caam_dma_dev->dev, get_dma_ops(dev));
-+		ret = devm_add_action_or_reset(dev, caam_dma_dev_unregister,
-+					       caam_dma_dev);
-+		if (ret)
-+			return ret;
-+	}
-+
- 	if (!reg_access)
- 		goto report_live;
- 
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0032-crypto-caam-add-CAAM-job-ring-UIO-support.patch b/target/linux/layerscape/patches-5.4/804-crypto-0032-crypto-caam-add-CAAM-job-ring-UIO-support.patch
deleted file mode 100644
index 56566ffad9..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0032-crypto-caam-add-CAAM-job-ring-UIO-support.patch
+++ /dev/null
@@ -1,337 +0,0 @@
-From 8b60a441202cb5c6b5264dbee633fcb24414bab4 Mon Sep 17 00:00:00 2001
-From: Sandeep Malik <Sandeep.Malik@nxp.com>
-Date: Wed, 15 Nov 2017 17:16:13 +0530
-Subject: [PATCH] crypto: caam - add CAAM job ring UIO support
-
-This patch add the support for job ring UIO so
-that userspace drivers can have access to the
-caam job rings
-
-Signed-off-by: Sandeep Malik <Sandeep.Malik@nxp.com>
-Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
----
- drivers/crypto/caam/Kconfig      |  11 ++
- drivers/crypto/caam/Makefile     |   1 +
- drivers/crypto/caam/fsl_jr_uio.c | 256 +++++++++++++++++++++++++++++++++++++++
- drivers/crypto/caam/fsl_jr_uio.h |  25 ++++
- 4 files changed, 293 insertions(+)
- create mode 100644 drivers/crypto/caam/fsl_jr_uio.c
- create mode 100644 drivers/crypto/caam/fsl_jr_uio.h
-
---- a/drivers/crypto/caam/Kconfig
-+++ b/drivers/crypto/caam/Kconfig
-@@ -203,6 +203,17 @@ config CRYPTO_DEV_FSL_CAAM_SECVIO
-           handler functions which can be specified to act on the consequences
-           of a security violation.
- 
-+config CRYPTO_DEV_FSL_CAAM_JR_UIO
-+	tristate "Freescale Job Ring UIO support"
-+	depends on UIO
-+	default y
-+	help
-+	  Selecting this will allow job ring UIO support for
-+	  Userspace drivers
-+
-+	  To compile this as a module, choose M here: the module
-+	  will be called fsl_jr_uio.
-+
- endif # CRYPTO_DEV_FSL_CAAM_JR
- 
- endif # CRYPTO_DEV_FSL_CAAM
---- a/drivers/crypto/caam/Makefile
-+++ b/drivers/crypto/caam/Makefile
-@@ -13,6 +13,7 @@ obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM) += caa
- obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_JR) += caam_jr.o
- obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC) += caamalg_desc.o
- obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC) += caamhash_desc.o
-+obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_JR_UIO) += fsl_jr_uio.o
- 
- caam-y := ctrl.o
- caam-$(CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API) += tag_object.o
---- /dev/null
-+++ b/drivers/crypto/caam/fsl_jr_uio.c
-@@ -0,0 +1,256 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2013 Freescale Semiconductor, Inc.
-+ * Copyright 2018 NXP
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of_address.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_platform.h>
-+#include <linux/io.h>
-+#include <linux/uio_driver.h>
-+#include <linux/slab.h>
-+#include <linux/list.h>
-+#include "regs.h"
-+#include "fsl_jr_uio.h"
-+
-+static const char jr_uio_version[] = "fsl JR UIO driver v1.0";
-+
-+#define NAME_LENGTH 30
-+#define JR_INDEX_OFFSET 12
-+
-+static const char uio_device_name[] = "fsl-jr";
-+static LIST_HEAD(jr_list);
-+
-+struct jr_uio_info {
-+	atomic_t ref; /* exclusive, only one open() at a time */
-+	struct uio_info uio;
-+	char name[NAME_LENGTH];
-+};
-+
-+struct jr_dev {
-+	u32 revision;
-+	u32 index;
-+	u32 irq;
-+	struct caam_job_ring __iomem *global_regs;
-+	struct device *dev;
-+	struct resource *res;
-+	struct jr_uio_info info;
-+	struct list_head node;
-+	struct list_head jr_list;
-+};
-+
-+static int jr_uio_open(struct uio_info *info, struct inode *inode)
-+{
-+	struct jr_uio_info *uio_info = container_of(info,
-+					struct jr_uio_info, uio);
-+
-+	if (!atomic_dec_and_test(&uio_info->ref)) {
-+		pr_err("%s: failing non-exclusive open()\n", uio_info->name);
-+		atomic_inc(&uio_info->ref);
-+		return -EBUSY;
-+	}
-+
-+	return 0;
-+}
-+
-+static int jr_uio_release(struct uio_info *info, struct inode *inode)
-+{
-+	struct jr_uio_info *uio_info = container_of(info,
-+					struct jr_uio_info, uio);
-+	atomic_inc(&uio_info->ref);
-+
-+	return 0;
-+}
-+
-+static irqreturn_t jr_uio_irq_handler(int irq, struct uio_info *dev_info)
-+{
-+	struct jr_dev *jrdev = dev_info->priv;
-+	u32 irqstate;
-+
-+	irqstate = rd_reg32(&jrdev->global_regs->jrintstatus);
-+
-+	if (!irqstate)
-+		return IRQ_NONE;
-+
-+	if (irqstate & JRINT_JR_ERROR)
-+		dev_info(jrdev->dev, "uio job ring error - irqstate: %08x\n",
-+			 irqstate);
-+
-+	/*mask valid interrupts */
-+	clrsetbits_32(&jrdev->global_regs->rconfig_lo, 0, JRCFG_IMSK);
-+
-+	/* Have valid interrupt at this point, just ACK and trigger */
-+	wr_reg32(&jrdev->global_regs->jrintstatus, irqstate);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int jr_uio_irqcontrol(struct uio_info *dev_info, int irqon)
-+{
-+	struct jr_dev *jrdev = dev_info->priv;
-+
-+	switch (irqon) {
-+	case SEC_UIO_SIMULATE_IRQ_CMD:
-+		uio_event_notify(dev_info);
-+		break;
-+	case SEC_UIO_ENABLE_IRQ_CMD:
-+		/* Enable Job Ring interrupt */
-+		clrsetbits_32(&jrdev->global_regs->rconfig_lo, JRCFG_IMSK, 0);
-+		break;
-+	case SEC_UIO_DISABLE_IRQ_CMD:
-+		/* Disable Job Ring interrupt */
-+		clrsetbits_32(&jrdev->global_regs->rconfig_lo, 0, JRCFG_IMSK);
-+		break;
-+	default:
-+		break;
-+	}
-+	return 0;
-+}
-+
-+static int __init jr_uio_init(struct jr_dev *uio_dev)
-+{
-+	int ret;
-+	struct jr_uio_info *info;
-+
-+	info = &uio_dev->info;
-+	atomic_set(&info->ref, 1);
-+	info->uio.version = jr_uio_version;
-+	info->uio.name = uio_dev->info.name;
-+	info->uio.mem[0].name = "JR config space";
-+	info->uio.mem[0].addr = uio_dev->res->start;
-+	info->uio.mem[0].size = uio_dev->res->end - uio_dev->res->start + 1;
-+	info->uio.mem[0].internal_addr = uio_dev->global_regs;
-+	info->uio.mem[0].memtype = UIO_MEM_PHYS;
-+	info->uio.irq = uio_dev->irq;
-+	info->uio.irq_flags = IRQF_SHARED;
-+	info->uio.handler = jr_uio_irq_handler;
-+	info->uio.irqcontrol = jr_uio_irqcontrol;
-+	info->uio.open = jr_uio_open;
-+	info->uio.release = jr_uio_release;
-+	info->uio.priv = uio_dev;
-+
-+	ret = uio_register_device(uio_dev->dev, &info->uio);
-+	if (ret) {
-+		dev_err(uio_dev->dev, "jr_uio: UIO registration failed\n");
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id jr_ids[] = {
-+	{ .compatible = "fsl,sec-v4.0-job-ring", },
-+	{ .compatible = "fsl,sec-v4.4-job-ring", },
-+	{ .compatible = "fsl,sec-v5.0-job-ring", },
-+	{ .compatible = "fsl,sec-v6.0-job-ring", },
-+	{},
-+};
-+
-+static int fsl_jr_probe(struct platform_device *dev)
-+{
-+	struct resource regs;
-+	struct jr_dev *jr_dev;
-+	struct device_node *jr_node;
-+	int ret, count = 0;
-+	struct list_head *p;
-+
-+	jr_node = dev->dev.of_node;
-+	if (!jr_node) {
-+		dev_err(&dev->dev, "Device OF-Node is NULL\n");
-+		return -EFAULT;
-+	}
-+
-+	jr_dev = devm_kzalloc(&dev->dev, sizeof(*jr_dev), GFP_KERNEL);
-+	if (!jr_dev)
-+		return -ENOMEM;
-+
-+	/* Creat name and index */
-+	list_for_each(p, &jr_list) {
-+		count++;
-+	}
-+	jr_dev->index = count;
-+
-+	snprintf(jr_dev->info.name, sizeof(jr_dev->info.name) - 1,
-+		 "%s%d", uio_device_name, jr_dev->index);
-+
-+	jr_dev->dev = &dev->dev;
-+	platform_set_drvdata(dev, jr_dev);
-+
-+	/* Get the resource from dtb node */
-+	ret = of_address_to_resource(jr_node, 0, &regs);
-+	if (unlikely(ret < 0)) {
-+		dev_err(&dev->dev, "OF-Address-to-resource Failed\n");
-+		ret = -EFAULT;
-+		goto abort;
-+	}
-+
-+	jr_dev->res = devm_request_mem_region(&dev->dev, regs.start,
-+					      regs.end - regs.start + 1,
-+					      jr_dev->info.name);
-+	if (unlikely(!jr_dev->res)) {
-+		dev_err(jr_dev->dev, "devm_request_mem_region failed\n");
-+		ret = -ENOMEM;
-+		goto abort;
-+	}
-+
-+	jr_dev->global_regs =
-+		devm_ioremap(&dev->dev, jr_dev->res->start,
-+			     jr_dev->res->end - jr_dev->res->start + 1);
-+	if (unlikely(jr_dev->global_regs == 0)) {
-+		dev_err(jr_dev->dev, "devm_ioremap failed\n");
-+		ret = -EIO;
-+		goto abort;
-+	}
-+	jr_dev->irq = irq_of_parse_and_map(jr_node, 0);
-+	dev_dbg(jr_dev->dev, "errirq: %d\n", jr_dev->irq);
-+
-+	/* Register UIO */
-+	ret = jr_uio_init(jr_dev);
-+	if (ret) {
-+		dev_err(&dev->dev, "UIO init Failed\n");
-+		goto abort;
-+	}
-+
-+	list_add_tail(&jr_dev->node, &jr_list);
-+
-+	dev_info(jr_dev->dev, "UIO device full name %s initialized\n",
-+		 jr_dev->info.name);
-+
-+	return 0;
-+
-+abort:
-+	return ret;
-+}
-+
-+static int fsl_jr_remove(struct platform_device *dev)
-+{
-+	struct jr_dev *jr_dev = platform_get_drvdata(dev);
-+
-+	if (!jr_dev)
-+		return 0;
-+
-+	list_del(&jr_dev->node);
-+	uio_unregister_device(&jr_dev->info.uio);
-+
-+	return 0;
-+}
-+
-+MODULE_DEVICE_TABLE(of, jr_ids);
-+
-+static struct platform_driver fsl_jr_driver = {
-+	.driver = {
-+		.name = "fsl-jr-uio",
-+		.of_match_table = jr_ids,
-+	},
-+	.probe = fsl_jr_probe,
-+	.remove = fsl_jr_remove,
-+};
-+
-+module_platform_driver(fsl_jr_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("NXP");
-+MODULE_DESCRIPTION("FSL SEC UIO Driver");
---- /dev/null
-+++ b/drivers/crypto/caam/fsl_jr_uio.h
-@@ -0,0 +1,25 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * CAAM Job RING UIO support header file
-+ *
-+ * Copyright 2013 Freescale Semiconductor, Inc
-+ * Copyright 2018 NXP
-+ */
-+
-+#ifndef FSL_JR_UIO_H
-+#define FSL_JR_UIO_H
-+
-+/** UIO command used by user-space driver to request
-+ *  disabling IRQs on a certain job ring
-+ */
-+#define SEC_UIO_DISABLE_IRQ_CMD         0
-+/** UIO command used by user-space driver to request
-+ *  enabling IRQs on a certain job ring
-+ */
-+#define SEC_UIO_ENABLE_IRQ_CMD          1
-+/** UIO command used by user-space driver to request SEC kernel driver
-+ *  to simulate that an IRQ is generated on a certain job ring
-+ */
-+#define SEC_UIO_SIMULATE_IRQ_CMD        2
-+
-+#endif
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0033-LFV-26-crypto-caam-fix-Secure-Memory-driver-init.patch b/target/linux/layerscape/patches-5.4/804-crypto-0033-LFV-26-crypto-caam-fix-Secure-Memory-driver-init.patch
deleted file mode 100644
index 53de880d75..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0033-LFV-26-crypto-caam-fix-Secure-Memory-driver-init.patch
+++ /dev/null
@@ -1,274 +0,0 @@
-From 1286c9b10f76b122ad1b328cc1bec17ac4d5908e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Horia=20Geant=C4=83?= <horia.geanta@nxp.com>
-Date: Wed, 13 Nov 2019 09:42:34 +0200
-Subject: [PATCH] LFV-26 crypto: caam - fix Secure Memory driver init
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-SM driver is buggy, since it runs irrespective of the presence of
-the caam-sm DT node.
-This causes issues on SoCs that have caam HW, but without support
-for secure memory.
-
-Let's transform the module in a library, in the same way (and for
-the same reasons) we did for the other job ring-dependent drivers
-(caamalg, caamhash etc.) in
-commit 1b46c90c8e00 ("crypto: caam - convert top level drivers to libraries")
-
-SM test module is also updated, to run only when needed.
-
-Fixes: 54e3fcf89f97 ("MLKU-25-3 crypto: caam - add Secure Memory support")
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
-Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
----
- drivers/crypto/caam/Kconfig    |  2 +-
- drivers/crypto/caam/ctrl.c     |  2 ++
- drivers/crypto/caam/intern.h   | 19 ++++++++++
- drivers/crypto/caam/jr.c       |  6 ++--
- drivers/crypto/caam/sm.h       |  1 -
- drivers/crypto/caam/sm_store.c | 80 +++++-------------------------------------
- drivers/crypto/caam/sm_test.c  |  7 ++++
- 7 files changed, 42 insertions(+), 75 deletions(-)
-
---- a/drivers/crypto/caam/Kconfig
-+++ b/drivers/crypto/caam/Kconfig
-@@ -167,7 +167,7 @@ config CRYPTO_DEV_FSL_CAAM_RNG_TEST
- 	  just before the RNG is registered with the hw_random API.
- 
- config CRYPTO_DEV_FSL_CAAM_SM
--	tristate "CAAM Secure Memory / Keystore API (EXPERIMENTAL)"
-+	bool "CAAM Secure Memory / Keystore API (EXPERIMENTAL)"
- 	help
- 	  Enables use of a prototype kernel-level Keystore API with CAAM
- 	  Secure Memory for insertion/extraction of bus-protected secrets.
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -763,6 +763,8 @@ iomap_ctrl:
- 		ctrlpriv->sm_size = resource_size(&res_regs);
- 	else
- 		ctrlpriv->sm_size = PG_SIZE_64K;
-+
-+	ctrlpriv->sm_present = 1;
- 	of_node_put(np);
- 
- 	if (!reg_access)
---- a/drivers/crypto/caam/intern.h
-+++ b/drivers/crypto/caam/intern.h
-@@ -86,6 +86,7 @@ struct caam_drv_private {
- 	 */
- 	u8 total_jobrs;		/* Total Job Rings in device */
- 	u8 qi_present;		/* Nonzero if QI present in device */
-+	u8 sm_present;		/* Nonzero if Secure Memory is supported */
- 	u8 mc_en;		/* Nonzero if MC f/w is active */
- 	u8 scu_en;		/* Nonzero if SCU f/w is active */
- 	u8 optee_en;		/* Nonzero if OP-TEE f/w is active */
-@@ -200,6 +201,24 @@ static inline void caam_qi_algapi_exit(v
- 
- #endif /* CONFIG_CAAM_QI */
- 
-+#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_SM
-+
-+int caam_sm_startup(struct device *dev);
-+void caam_sm_shutdown(struct device *dev);
-+
-+#else
-+
-+static inline int caam_sm_startup(struct device *dev)
-+{
-+	return 0;
-+}
-+
-+static inline void caam_sm_shutdown(struct device *dev)
-+{
-+}
-+
-+#endif /* CONFIG_CRYPTO_DEV_FSL_CAAM_SM */
-+
- #ifdef CONFIG_DEBUG_FS
- static int caam_debugfs_u64_get(void *data, u64 *val)
- {
---- a/drivers/crypto/caam/jr.c
-+++ b/drivers/crypto/caam/jr.c
-@@ -34,6 +34,7 @@ static void register_algs(struct device
- 	if (++active_devs != 1)
- 		goto algs_unlock;
- 
-+	caam_sm_startup(dev);
- 	caam_algapi_init(dev);
- 	caam_algapi_hash_init(dev);
- 	caam_pkc_init(dev);
-@@ -44,7 +45,7 @@ algs_unlock:
- 	mutex_unlock(&algs_lock);
- }
- 
--static void unregister_algs(void)
-+static void unregister_algs(struct device *dev)
- {
- 	mutex_lock(&algs_lock);
- 
-@@ -57,6 +58,7 @@ static void unregister_algs(void)
- 	caam_pkc_exit();
- 	caam_algapi_hash_exit();
- 	caam_algapi_exit();
-+	caam_sm_shutdown(dev);
- 
- algs_unlock:
- 	mutex_unlock(&algs_lock);
-@@ -143,7 +145,7 @@ static int caam_jr_remove(struct platfor
- 	}
- 
- 	/* Unregister JR-based RNG & crypto algorithms */
--	unregister_algs();
-+	unregister_algs(jrdev->parent);
- 
- 	/* Remove the node from Physical JobR list maintained by driver */
- 	spin_lock(&driver_data.jr_alloc_lock);
---- a/drivers/crypto/caam/sm.h
-+++ b/drivers/crypto/caam/sm.h
-@@ -41,7 +41,6 @@ void sm_init_keystore(struct device *dev
- u32 sm_detect_keystore_units(struct device *dev);
- int sm_establish_keystore(struct device *dev, u32 unit);
- void sm_release_keystore(struct device *dev, u32 unit);
--void caam_sm_shutdown(struct platform_device *pdev);
- int caam_sm_example_init(struct platform_device *pdev);
- 
- /* Keystore accessor functions */
---- a/drivers/crypto/caam/sm_store.c
-+++ b/drivers/crypto/caam/sm_store.c
-@@ -1053,9 +1053,9 @@ EXPORT_SYMBOL(sm_keystore_slot_import);
-  * Also, simply uses ring 0 for execution at the present
-  */
- 
--int caam_sm_startup(struct platform_device *pdev)
-+int caam_sm_startup(struct device *ctrldev)
- {
--	struct device *ctrldev, *smdev;
-+	struct device *smdev;
- 	struct caam_drv_private *ctrlpriv;
- 	struct caam_drv_private_sm *smpriv;
- 	struct caam_drv_private_jr *jrpriv;	/* need this for reg page */
-@@ -1065,17 +1065,10 @@ int caam_sm_startup(struct platform_devi
- 	int ret = 0;
- 
- 	struct device_node *np;
--	ctrldev = &pdev->dev;
- 	ctrlpriv = dev_get_drvdata(ctrldev);
- 
--	/*
--	 * If ctrlpriv is NULL, it's probably because the caam driver wasn't
--	 * properly initialized (e.g. RNG4 init failed). Thus, bail out here.
--	 */
--	if (!ctrlpriv) {
--		ret = -ENODEV;
--		goto exit;
--	}
-+	if (!ctrlpriv->sm_present)
-+		return 0;
- 
- 	/*
- 	 * Set up the private block for secure memory
-@@ -1248,14 +1241,16 @@ exit:
- 	return ret;
- }
- 
--void caam_sm_shutdown(struct platform_device *pdev)
-+void caam_sm_shutdown(struct device *ctrldev)
- {
--	struct device *ctrldev, *smdev;
-+	struct device *smdev;
- 	struct caam_drv_private *priv;
- 	struct caam_drv_private_sm *smpriv;
- 
--	ctrldev = &pdev->dev;
- 	priv = dev_get_drvdata(ctrldev);
-+	if (!priv->sm_present)
-+		return;
-+
- 	smdev = priv->smdev;
- 
- 	/* Return if resource not initialized by startup */
-@@ -1273,60 +1268,3 @@ void caam_sm_shutdown(struct platform_de
- 	kfree(smpriv);
- }
- EXPORT_SYMBOL(caam_sm_shutdown);
--
--static void  __exit caam_sm_exit(void)
--{
--	struct device_node *dev_node;
--	struct platform_device *pdev;
--
--	dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
--	if (!dev_node) {
--		dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
--		if (!dev_node)
--			return;
--	}
--
--	pdev = of_find_device_by_node(dev_node);
--	if (!pdev)
--		return;
--
--	of_node_put(dev_node);
--
--	caam_sm_shutdown(pdev);
--
--	return;
--}
--
--static int __init caam_sm_init(void)
--{
--	struct device_node *dev_node;
--	struct platform_device *pdev;
--
--	/*
--	 * Do of_find_compatible_node() then of_find_device_by_node()
--	 * once a functional device tree is available
--	 */
--	dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
--	if (!dev_node) {
--		dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
--		if (!dev_node)
--			return -ENODEV;
--	}
--
--	pdev = of_find_device_by_node(dev_node);
--	if (!pdev)
--		return -ENODEV;
--
--	of_node_get(dev_node);
--
--	caam_sm_startup(pdev);
--
--	return 0;
--}
--
--module_init(caam_sm_init);
--module_exit(caam_sm_exit);
--
--MODULE_LICENSE("Dual BSD/GPL");
--MODULE_DESCRIPTION("FSL CAAM Secure Memory / Keystore");
--MODULE_AUTHOR("Freescale Semiconductor - NMSG/MAD");
---- a/drivers/crypto/caam/sm_test.c
-+++ b/drivers/crypto/caam/sm_test.c
-@@ -531,6 +531,7 @@ static int __init caam_sm_test_init(void
- {
- 	struct device_node *dev_node;
- 	struct platform_device *pdev;
-+	struct caam_drv_private *priv;
- 	int ret;
- 
- 	/*
-@@ -550,6 +551,12 @@ static int __init caam_sm_test_init(void
- 
- 	of_node_put(dev_node);
- 
-+	priv = dev_get_drvdata(&pdev->dev);
-+	if (!priv->sm_present) {
-+		dev_info(&pdev->dev, "No SM support, skipping tests\n");
-+		return -ENODEV;
-+	}
-+
- 	ret = caam_sm_example_init(pdev);
- 	if (ret)
- 		dev_err(&pdev->dev, "SM test failed: %d\n", ret);
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0034-LF-63-1-crypto-caam-fix-SM-test-init.patch b/target/linux/layerscape/patches-5.4/804-crypto-0034-LF-63-1-crypto-caam-fix-SM-test-init.patch
deleted file mode 100644
index 7e3299ec94..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0034-LF-63-1-crypto-caam-fix-SM-test-init.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 79aa6ebf9d0b982c859a0c1bec1d879ff3d9ad29 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Horia=20Geant=C4=83?= <horia.geanta@nxp.com>
-Date: Wed, 27 Nov 2019 12:30:41 +0200
-Subject: [PATCH] LF-63-1 crypto: caam - fix SM test init
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Commit 77debf316c44 ("LFV-26 crypto: caam - fix Secure Memory driver init")
-addressed SM driver initialization and also update SM test.
-
-However, the fix for SM test is insufficient.
-There are cases when SM test runs before SM driver, causing a crash
-due to uninitialized "priv" pointer being dereferenced.
-
-The fix consists in the following:
-
-1. Since SM test is a "bare" device driver (doesn't sit on any bus),
-there is no deferred probing support.
-Thus we have no choice (*) but to abort SM tests with a notification.
-
-(*) We don't want to force SM driver running first by means of
-init levels etc. Just KISS.
-
-2. SM test driver forced to being built only as a module
-Since SM test driver's only goal is to run SM tests, it doesn't make
-any sense to be built-in.
-Building the driver as a module allows for running the tests
-several times if needed (multiple modprobe & rmmod cycles).
-
-Note: from the perspective of wanting to test repetitively, it would
-make sense to force module unloading by returning an error code
-in the module_init function.
-However, this might affect test scripts (due to error code and/or
-message output by unsuccessful module loading), so we postpone
-this change for now.
-
-Fixes: d02fe599d7d5 ("MLKU-25-3 crypto: caam - add Secure Memory support")
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
-Acked-by: Leonard Crestez <leonard.crestez@nxp.com>
----
- drivers/crypto/caam/Kconfig   | 1 +
- drivers/crypto/caam/Makefile  | 2 +-
- drivers/crypto/caam/sm_test.c | 4 ++++
- 3 files changed, 6 insertions(+), 1 deletion(-)
-
---- a/drivers/crypto/caam/Kconfig
-+++ b/drivers/crypto/caam/Kconfig
-@@ -191,6 +191,7 @@ config CRYPTO_DEV_FSL_CAAM_SM_SLOTSIZE
- config CRYPTO_DEV_FSL_CAAM_SM_TEST
- 	tristate "CAAM Secure Memory - Keystore Test/Example (EXPERIMENTAL)"
- 	depends on CRYPTO_DEV_FSL_CAAM_SM
-+	depends on m
- 	help
- 	  Example thread to exercise the Keystore API and to verify that
- 	  stored and recovered secrets can be used for general purpose
---- a/drivers/crypto/caam/Makefile
-+++ b/drivers/crypto/caam/Makefile
-@@ -24,7 +24,7 @@ caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHA
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API) += caampkc.o pkc_desc.o
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_SM) += sm_store.o
--caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_SM_TEST) += sm_test.o
-+obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_SM_TEST) += sm_test.o
- caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_SECVIO) += secvio.o
- #caam-jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_TK_API) += tag_object.o
- 
---- a/drivers/crypto/caam/sm_test.c
-+++ b/drivers/crypto/caam/sm_test.c
-@@ -552,6 +552,10 @@ static int __init caam_sm_test_init(void
- 	of_node_put(dev_node);
- 
- 	priv = dev_get_drvdata(&pdev->dev);
-+	if (!priv) {
-+		dev_info(&pdev->dev, "SM driver not ready, aborting tests\n");
-+		return -ENODEV;
-+	}
- 	if (!priv->sm_present) {
- 		dev_info(&pdev->dev, "No SM support, skipping tests\n");
- 		return -ENODEV;
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0035-crypto-caam-qi-use-QBMan-NXP-SDK-driver.patch b/target/linux/layerscape/patches-5.4/804-crypto-0035-crypto-caam-qi-use-QBMan-NXP-SDK-driver.patch
deleted file mode 100644
index 524ac40692..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0035-crypto-caam-qi-use-QBMan-NXP-SDK-driver.patch
+++ /dev/null
@@ -1,342 +0,0 @@
-From 28ef279c55a914372bf41587f6264e8e3e61e7d5 Mon Sep 17 00:00:00 2001
-From: Horia Geanta <horia.geanta@nxp.com>
-Date: Mon, 12 Jun 2017 19:42:34 +0300
-Subject: [PATCH] crypto: caam/qi - use QBMan (NXP) SDK driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Update caam/qi to work with QBMan from NXP SDK.
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
-
-Squashed "crypto: caam/qi - fix FD congestion weight" fix.
-
-Solved rebase conflicts:
-
-drivers/crypto/caam/qi.c:579
-    kept call to dev_err_ratelimited, but changed to fd->status
-drivers/crypto/caam/sg_sw_qm.h:96
-    kept changes from patch, but changed sg_count to len
-
-Signed-off-by: Vlad Pelin <vlad.pelin@nxp.com>
-Acked-by: Horia Geanta <horia.geanta@nxp.com>
----
- drivers/crypto/caam/Kconfig    |  2 +-
- drivers/crypto/caam/qi.c       | 82 +++++++++++++++++++++---------------------
- drivers/crypto/caam/qi.h       |  2 +-
- drivers/crypto/caam/sg_sw_qm.h | 46 ++++++++++++++++--------
- 4 files changed, 74 insertions(+), 58 deletions(-)
-
---- a/drivers/crypto/caam/Kconfig
-+++ b/drivers/crypto/caam/Kconfig
-@@ -106,7 +106,7 @@ config CRYPTO_DEV_FSL_CAAM_CRYPTO_API
- 
- config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI
- 	bool "Queue Interface as Crypto API backend"
--	depends on FSL_DPAA && NET
-+	depends on FSL_SDK_DPA && NET
- 	default y
- 	select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
- 	select CRYPTO_AUTHENC
---- a/drivers/crypto/caam/qi.c
-+++ b/drivers/crypto/caam/qi.c
-@@ -9,7 +9,7 @@
- 
- #include <linux/cpumask.h>
- #include <linux/kthread.h>
--#include <soc/fsl/qman.h>
-+#include <linux/fsl_qman.h>
- 
- #include "regs.h"
- #include "qi.h"
-@@ -107,23 +107,21 @@ static void *caam_iova_to_virt(struct io
- int caam_qi_enqueue(struct device *qidev, struct caam_drv_req *req)
- {
- 	struct qm_fd fd;
--	dma_addr_t addr;
- 	int ret;
- 	int num_retries = 0;
- 
--	qm_fd_clear_fd(&fd);
--	qm_fd_set_compound(&fd, qm_sg_entry_get_len(&req->fd_sgt[1]));
--
--	addr = dma_map_single(qidev, req->fd_sgt, sizeof(req->fd_sgt),
-+	fd.cmd = 0;
-+	fd.format = qm_fd_compound;
-+	fd.cong_weight = caam32_to_cpu(req->fd_sgt[1].length);
-+	fd.addr = dma_map_single(qidev, req->fd_sgt, sizeof(req->fd_sgt),
- 			      DMA_BIDIRECTIONAL);
--	if (dma_mapping_error(qidev, addr)) {
-+	if (dma_mapping_error(qidev, fd.addr)) {
- 		dev_err(qidev, "DMA mapping error for QI enqueue request\n");
- 		return -EIO;
- 	}
--	qm_fd_addr_set64(&fd, addr);
- 
- 	do {
--		ret = qman_enqueue(req->drv_ctx->req_fq, &fd);
-+		ret = qman_enqueue(req->drv_ctx->req_fq, &fd, 0);
- 		if (likely(!ret))
- 			return 0;
- 
-@@ -139,7 +137,7 @@ int caam_qi_enqueue(struct device *qidev
- EXPORT_SYMBOL(caam_qi_enqueue);
- 
- static void caam_fq_ern_cb(struct qman_portal *qm, struct qman_fq *fq,
--			   const union qm_mr_entry *msg)
-+			   const struct qm_mr_entry *msg)
- {
- 	const struct qm_fd *fd;
- 	struct caam_drv_req *drv_req;
-@@ -148,7 +146,7 @@ static void caam_fq_ern_cb(struct qman_p
- 
- 	fd = &msg->ern.fd;
- 
--	if (qm_fd_get_format(fd) != qm_fd_compound) {
-+	if (fd->format != qm_fd_compound) {
- 		dev_err(qidev, "Non-compound FD from CAAM\n");
- 		return;
- 	}
-@@ -186,20 +184,22 @@ static struct qman_fq *create_caam_req_f
- 	req_fq->cb.fqs = NULL;
- 
- 	ret = qman_create_fq(0, QMAN_FQ_FLAG_DYNAMIC_FQID |
--				QMAN_FQ_FLAG_TO_DCPORTAL, req_fq);
-+				QMAN_FQ_FLAG_TO_DCPORTAL | QMAN_FQ_FLAG_LOCKED,
-+			     req_fq);
- 	if (ret) {
- 		dev_err(qidev, "Failed to create session req FQ\n");
- 		goto create_req_fq_fail;
- 	}
- 
--	memset(&opts, 0, sizeof(opts));
--	opts.we_mask = cpu_to_be16(QM_INITFQ_WE_FQCTRL | QM_INITFQ_WE_DESTWQ |
--				   QM_INITFQ_WE_CONTEXTB |
--				   QM_INITFQ_WE_CONTEXTA | QM_INITFQ_WE_CGID);
--	opts.fqd.fq_ctrl = cpu_to_be16(QM_FQCTRL_CPCSTASH | QM_FQCTRL_CGE);
--	qm_fqd_set_destwq(&opts.fqd, qm_channel_caam, 2);
--	opts.fqd.context_b = cpu_to_be32(qman_fq_fqid(rsp_fq));
--	qm_fqd_context_a_set64(&opts.fqd, hwdesc);
-+	opts.we_mask = QM_INITFQ_WE_FQCTRL | QM_INITFQ_WE_DESTWQ |
-+		       QM_INITFQ_WE_CONTEXTB | QM_INITFQ_WE_CONTEXTA |
-+		       QM_INITFQ_WE_CGID;
-+	opts.fqd.fq_ctrl = QM_FQCTRL_CPCSTASH | QM_FQCTRL_CGE;
-+	opts.fqd.dest.channel = qm_channel_caam;
-+	opts.fqd.dest.wq = 2;
-+	opts.fqd.context_b = qman_fq_fqid(rsp_fq);
-+	opts.fqd.context_a.hi = upper_32_bits(hwdesc);
-+	opts.fqd.context_a.lo = lower_32_bits(hwdesc);
- 	opts.fqd.cgid = qipriv.cgr.cgrid;
- 
- 	ret = qman_init_fq(req_fq, fq_sched_flag, &opts);
-@@ -213,7 +213,7 @@ static struct qman_fq *create_caam_req_f
- 	return req_fq;
- 
- init_req_fq_fail:
--	qman_destroy_fq(req_fq);
-+	qman_destroy_fq(req_fq, 0);
- create_req_fq_fail:
- 	kfree(req_fq);
- 	return ERR_PTR(ret);
-@@ -281,7 +281,7 @@ empty_fq:
- 	if (ret)
- 		dev_err(qidev, "OOS of FQID: %u failed\n", fq->fqid);
- 
--	qman_destroy_fq(fq);
-+	qman_destroy_fq(fq, 0);
- 	kfree(fq);
- 
- 	return ret;
-@@ -298,7 +298,7 @@ static int empty_caam_fq(struct qman_fq
- 		if (ret)
- 			return ret;
- 
--		if (!qm_mcr_np_get(&np, frm_cnt))
-+		if (!np.frm_cnt)
- 			break;
- 
- 		msleep(20);
-@@ -565,30 +565,28 @@ static enum qman_cb_dqrr_result caam_rsp
- 	const struct qm_fd *fd;
- 	struct device *qidev = &(raw_cpu_ptr(&pcpu_qipriv)->net_dev.dev);
- 	struct caam_drv_private *priv = dev_get_drvdata(qidev);
--	u32 status;
- 
- 	if (caam_qi_napi_schedule(p, caam_napi))
- 		return qman_cb_dqrr_stop;
- 
- 	fd = &dqrr->fd;
--	status = be32_to_cpu(fd->status);
--	if (unlikely(status)) {
--		u32 ssrc = status & JRSTA_SSRC_MASK;
--		u8 err_id = status & JRSTA_CCBERR_ERRID_MASK;
-+	if (unlikely(fd->status)) {
-+		u32 ssrc = fd->status & JRSTA_SSRC_MASK;
-+		u8 err_id = fd->status & JRSTA_CCBERR_ERRID_MASK;
- 
- 		if (ssrc != JRSTA_SSRC_CCB_ERROR ||
- 		    err_id != JRSTA_CCBERR_ERRID_ICVCHK)
- 			dev_err_ratelimited(qidev,
- 					    "Error: %#x in CAAM response FD\n",
--					    status);
-+					    fd->status);
- 	}
- 
--	if (unlikely(qm_fd_get_format(fd) != qm_fd_compound)) {
-+	if (unlikely(fd->format != qm_fd_compound)) {
- 		dev_err(qidev, "Non-compound FD from CAAM\n");
- 		return qman_cb_dqrr_consume;
- 	}
- 
--	drv_req = caam_iova_to_virt(priv->domain, qm_fd_addr_get64(fd));
-+	drv_req = caam_iova_to_virt(priv->domain, fd->addr);
- 	if (unlikely(!drv_req)) {
- 		dev_err(qidev,
- 			"Can't find original request for caam response\n");
-@@ -598,7 +596,7 @@ static enum qman_cb_dqrr_result caam_rsp
- 	dma_unmap_single(drv_req->drv_ctx->qidev, qm_fd_addr(fd),
- 			 sizeof(drv_req->fd_sgt), DMA_BIDIRECTIONAL);
- 
--	drv_req->cbk(drv_req, status);
-+	drv_req->cbk(drv_req, fd->status);
- 	return qman_cb_dqrr_consume;
- }
- 
-@@ -622,17 +620,18 @@ static int alloc_rsp_fq_cpu(struct devic
- 		return -ENODEV;
- 	}
- 
--	memset(&opts, 0, sizeof(opts));
--	opts.we_mask = cpu_to_be16(QM_INITFQ_WE_FQCTRL | QM_INITFQ_WE_DESTWQ |
--				   QM_INITFQ_WE_CONTEXTB |
--				   QM_INITFQ_WE_CONTEXTA | QM_INITFQ_WE_CGID);
--	opts.fqd.fq_ctrl = cpu_to_be16(QM_FQCTRL_CTXASTASHING |
--				       QM_FQCTRL_CPCSTASH | QM_FQCTRL_CGE);
--	qm_fqd_set_destwq(&opts.fqd, qman_affine_channel(cpu), 3);
-+	opts.we_mask = QM_INITFQ_WE_FQCTRL | QM_INITFQ_WE_DESTWQ |
-+		QM_INITFQ_WE_CONTEXTB | QM_INITFQ_WE_CONTEXTA |
-+		QM_INITFQ_WE_CGID;
-+	opts.fqd.fq_ctrl = QM_FQCTRL_CTXASTASHING | QM_FQCTRL_CPCSTASH |
-+			   QM_FQCTRL_CGE;
-+	opts.fqd.dest.channel = qman_affine_channel(cpu);
-+	opts.fqd.dest.wq = 3;
- 	opts.fqd.cgid = qipriv.cgr.cgrid;
- 	opts.fqd.context_a.stashing.exclusive =	QM_STASHING_EXCL_CTX |
- 						QM_STASHING_EXCL_DATA;
--	qm_fqd_set_stashing(&opts.fqd, 0, 1, 1);
-+	opts.fqd.context_a.stashing.data_cl = 1;
-+	opts.fqd.context_a.stashing.context_cl = 1;
- 
- 	ret = qman_init_fq(fq, QMAN_INITFQ_FLAG_SCHED, &opts);
- 	if (ret) {
-@@ -662,8 +661,7 @@ static int init_cgr(struct device *qidev
- 
- 	qipriv.cgr.cb = cgr_cb;
- 	memset(&opts, 0, sizeof(opts));
--	opts.we_mask = cpu_to_be16(QM_CGR_WE_CSCN_EN | QM_CGR_WE_CS_THRES |
--				   QM_CGR_WE_MODE);
-+	opts.we_mask = QM_CGR_WE_CSCN_EN | QM_CGR_WE_CS_THRES | QM_CGR_WE_MODE;
- 	opts.cgr.cscn_en = QM_CGR_EN;
- 	opts.cgr.mode = QMAN_CGR_MODE_FRAME;
- 	qm_cgr_cs_thres_set64(&opts.cgr.cs_thres, val, 1);
---- a/drivers/crypto/caam/qi.h
-+++ b/drivers/crypto/caam/qi.h
-@@ -9,7 +9,7 @@
- #ifndef __QI_H__
- #define __QI_H__
- 
--#include <soc/fsl/qman.h>
-+#include <linux/fsl_qman.h>
- #include "compat.h"
- #include "desc.h"
- #include "desc_constr.h"
---- a/drivers/crypto/caam/sg_sw_qm.h
-+++ b/drivers/crypto/caam/sg_sw_qm.h
-@@ -7,46 +7,61 @@
- #ifndef __SG_SW_QM_H
- #define __SG_SW_QM_H
- 
--#include <soc/fsl/qman.h>
-+#include <linux/fsl_qman.h>
- #include "regs.h"
- 
-+static inline void cpu_to_hw_sg(struct qm_sg_entry *qm_sg_ptr)
-+{
-+	dma_addr_t addr = qm_sg_ptr->opaque;
-+
-+	qm_sg_ptr->opaque = cpu_to_caam64(addr);
-+	qm_sg_ptr->sgt_efl = cpu_to_caam32(qm_sg_ptr->sgt_efl);
-+}
-+
- static inline void __dma_to_qm_sg(struct qm_sg_entry *qm_sg_ptr, dma_addr_t dma,
--				  u16 offset)
-+				  u32 len, u16 offset)
- {
--	qm_sg_entry_set64(qm_sg_ptr, dma);
-+	qm_sg_ptr->addr = dma;
-+	qm_sg_ptr->length = len;
- 	qm_sg_ptr->__reserved2 = 0;
- 	qm_sg_ptr->bpid = 0;
--	qm_sg_ptr->offset = cpu_to_be16(offset & QM_SG_OFF_MASK);
-+	qm_sg_ptr->__reserved3 = 0;
-+	qm_sg_ptr->offset = offset & QM_SG_OFFSET_MASK;
-+
-+	cpu_to_hw_sg(qm_sg_ptr);
- }
- 
- static inline void dma_to_qm_sg_one(struct qm_sg_entry *qm_sg_ptr,
- 				    dma_addr_t dma, u32 len, u16 offset)
- {
--	__dma_to_qm_sg(qm_sg_ptr, dma, offset);
--	qm_sg_entry_set_len(qm_sg_ptr, len);
-+	qm_sg_ptr->extension = 0;
-+	qm_sg_ptr->final = 0;
-+	__dma_to_qm_sg(qm_sg_ptr, dma, len, offset);
- }
- 
- static inline void dma_to_qm_sg_one_last(struct qm_sg_entry *qm_sg_ptr,
- 					 dma_addr_t dma, u32 len, u16 offset)
- {
--	__dma_to_qm_sg(qm_sg_ptr, dma, offset);
--	qm_sg_entry_set_f(qm_sg_ptr, len);
-+	qm_sg_ptr->extension = 0;
-+	qm_sg_ptr->final = 1;
-+	__dma_to_qm_sg(qm_sg_ptr, dma, len, offset);
- }
- 
- static inline void dma_to_qm_sg_one_ext(struct qm_sg_entry *qm_sg_ptr,
- 					dma_addr_t dma, u32 len, u16 offset)
- {
--	__dma_to_qm_sg(qm_sg_ptr, dma, offset);
--	qm_sg_ptr->cfg = cpu_to_be32(QM_SG_EXT | (len & QM_SG_LEN_MASK));
-+	qm_sg_ptr->extension = 1;
-+	qm_sg_ptr->final = 0;
-+	__dma_to_qm_sg(qm_sg_ptr, dma, len, offset);
- }
- 
- static inline void dma_to_qm_sg_one_last_ext(struct qm_sg_entry *qm_sg_ptr,
- 					     dma_addr_t dma, u32 len,
- 					     u16 offset)
- {
--	__dma_to_qm_sg(qm_sg_ptr, dma, offset);
--	qm_sg_ptr->cfg = cpu_to_be32(QM_SG_EXT | QM_SG_FIN |
--				     (len & QM_SG_LEN_MASK));
-+	qm_sg_ptr->extension = 1;
-+	qm_sg_ptr->final = 1;
-+	__dma_to_qm_sg(qm_sg_ptr, dma, len, offset);
- }
- 
- /*
-@@ -79,7 +94,10 @@ static inline void sg_to_qm_sg_last(stru
- 				    struct qm_sg_entry *qm_sg_ptr, u16 offset)
- {
- 	qm_sg_ptr = sg_to_qm_sg(sg, len, qm_sg_ptr, offset);
--	qm_sg_entry_set_f(qm_sg_ptr, qm_sg_entry_get_len(qm_sg_ptr));
-+
-+	qm_sg_ptr->sgt_efl = caam32_to_cpu(qm_sg_ptr->sgt_efl);
-+	qm_sg_ptr->final = 1;
-+	qm_sg_ptr->sgt_efl = cpu_to_caam32(qm_sg_ptr->sgt_efl);
- }
- 
- #endif /* __SG_SW_QM_H */
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0036-LF-933-crypto-caam-fix-iosource-busy-issue.patch b/target/linux/layerscape/patches-5.4/804-crypto-0036-LF-933-crypto-caam-fix-iosource-busy-issue.patch
deleted file mode 100644
index f142a67569..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0036-LF-933-crypto-caam-fix-iosource-busy-issue.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 4f59ceff69a20d28881848140ef5fc2888042e62 Mon Sep 17 00:00:00 2001
-From: Gagandeep Singh <g.singh@nxp.com>
-Date: Mon, 17 Feb 2020 16:41:01 +0000
-Subject: [PATCH] LF-933: crypto: caam: fix iosource busy issue
-
-The caam controller driver claims the ownership of the
-whole caam register space due to which while binding the
-Job Ring to fsl-jr-uio driver, it returns IOSOURCE_BUSY
-error.
-
-This patch replaces devm_request_mem_region() API with
-platform_get_resource() to avoid this issue.
-
-Fixes: eb5e94d4624a ("crypto: caam - use devres to unmap memory")
-
-Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
-Acked-by: Horia Geanta <horia.geanta@nxp.com>
----
- drivers/crypto/caam/fsl_jr_uio.c | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
---- a/drivers/crypto/caam/fsl_jr_uio.c
-+++ b/drivers/crypto/caam/fsl_jr_uio.c
-@@ -187,11 +187,10 @@ static int fsl_jr_probe(struct platform_
- 		goto abort;
- 	}
- 
--	jr_dev->res = devm_request_mem_region(&dev->dev, regs.start,
--					      regs.end - regs.start + 1,
--					      jr_dev->info.name);
-+
-+	jr_dev->res = platform_get_resource(dev, IORESOURCE_MEM, 0);
- 	if (unlikely(!jr_dev->res)) {
--		dev_err(jr_dev->dev, "devm_request_mem_region failed\n");
-+		dev_err(jr_dev->dev, "platform_get_resource() failed\n");
- 		ret = -ENOMEM;
- 		goto abort;
- 	}
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0038-LF-838-crypto-caam-increase-the-domain-of-write-memo.patch b/target/linux/layerscape/patches-5.4/804-crypto-0038-LF-838-crypto-caam-increase-the-domain-of-write-memo.patch
deleted file mode 100644
index 7cc8c5f244..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0038-LF-838-crypto-caam-increase-the-domain-of-write-memo.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From ada13fea4dcc8419e0523614b108635d8f689000 Mon Sep 17 00:00:00 2001
-From: Iuliana Prodan <iuliana.prodan@nxp.com>
-Date: Mon, 17 Feb 2020 03:05:10 +0200
-Subject: [PATCH] LF-838: crypto: caam - increase the domain of write memory
- barrier to full system
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-In caam_jr_enqueue, under heavy DDR load, smp_wmb() or dma_wmb()
-fail to make the input ring be updated before the CAAM starts
-reading it. So, CAAM will process, again, an old descriptor address
-and will put it in the output ring. This will make caam_jr_dequeue()
-to fail, since this old descriptor is not in the software ring.
-To fix this, use wmb() which works on the full system instead of
-inner/outer shareable domains.
-
-Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
-Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
-Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
----
- drivers/crypto/caam/jr.c | 10 +++++++++-
- 1 file changed, 9 insertions(+), 1 deletion(-)
-
---- a/drivers/crypto/caam/jr.c
-+++ b/drivers/crypto/caam/jr.c
-@@ -434,8 +434,16 @@ int caam_jr_enqueue(struct device *dev,
- 	 * Guarantee that the descriptor's DMA address has been written to
- 	 * the next slot in the ring before the write index is updated, since
- 	 * other cores may update this index independently.
-+	 *
-+	 * Under heavy DDR load, smp_wmb() or dma_wmb() fail to make the input
-+	 * ring be updated before the CAAM starts reading it. So, CAAM will
-+	 * process, again, an old descriptor address and will put it in the
-+	 * output ring. This will make caam_jr_dequeue() to fail, since this
-+	 * old descriptor is not in the software ring.
-+	 * To fix this, use wmb() which works on the full system instead of
-+	 * inner/outer shareable domains.
- 	 */
--	smp_wmb();
-+	wmb();
- 
- 	jrp->head = (head + 1) & (JOBR_DEPTH - 1);
- 
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0040-LF-292-1-crypto-caam-refactor-RNG-initialization.patch b/target/linux/layerscape/patches-5.4/804-crypto-0040-LF-292-1-crypto-caam-refactor-RNG-initialization.patch
deleted file mode 100644
index c4c22a1cd5..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0040-LF-292-1-crypto-caam-refactor-RNG-initialization.patch
+++ /dev/null
@@ -1,248 +0,0 @@
-From 43f8f404e2e8cd81baa4d89706e40901c466c7bb Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Horia=20Geant=C4=83?= <horia.geanta@nxp.com>
-Date: Fri, 21 Feb 2020 11:48:39 +0100
-Subject: [PATCH] LF-292-1 crypto: caam - refactor RNG initialization
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-RNG (re-)initialization will be needed on pm resume path,
-thus refactor the corresponding code out of the probe callback.
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
-Reviewed-by: Valentin Ciocoi Radulescu <valentin.ciocoi@nxp.com>
-Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
-Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- drivers/crypto/caam/ctrl.c | 189 ++++++++++++++++++++++++---------------------
- 1 file changed, 102 insertions(+), 87 deletions(-)
-
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -327,13 +327,12 @@ static int instantiate_rng(struct device
- /*
-  * kick_trng - sets the various parameters for enabling the initialization
-  *	       of the RNG4 block in CAAM
-- * @pdev - pointer to the platform device
-+ * @dev - pointer to the controller device
-  * @ent_delay - Defines the length (in system clocks) of each entropy sample.
-  */
--static void kick_trng(struct platform_device *pdev, int ent_delay)
-+static void kick_trng(struct device *dev, int ent_delay)
- {
--	struct device *ctrldev = &pdev->dev;
--	struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev);
-+	struct caam_drv_private *ctrlpriv = dev_get_drvdata(dev);
- 	struct caam_ctrl __iomem *ctrl;
- 	struct rng4tst __iomem *r4tst;
- 	u32 val;
-@@ -571,10 +570,105 @@ static void caam_dma_dev_unregister(void
- 	platform_device_unregister(data);
- }
- 
-+static int caam_ctrl_rng_init(struct device *dev)
-+{
-+	struct caam_drv_private *ctrlpriv = dev_get_drvdata(dev);
-+	struct caam_ctrl __iomem *ctrl = ctrlpriv->ctrl;
-+	int ret, gen_sk, ent_delay = RTSDCTL_ENT_DLY_MIN;
-+	u8 rng_vid;
-+
-+	if (ctrlpriv->era < 10) {
-+		struct caam_perfmon __iomem *perfmon;
-+
-+		perfmon = ctrlpriv->total_jobrs ?
-+			  (struct caam_perfmon *)&ctrlpriv->jr[0]->perfmon :
-+			  (struct caam_perfmon *)&ctrl->perfmon;
-+
-+		rng_vid = (rd_reg32(&perfmon->cha_id_ls) &
-+			   CHA_ID_LS_RNG_MASK) >> CHA_ID_LS_RNG_SHIFT;
-+	} else {
-+		struct version_regs __iomem *vreg;
-+
-+		vreg = ctrlpriv->total_jobrs ?
-+			(struct version_regs *)&ctrlpriv->jr[0]->vreg :
-+			(struct version_regs *)&ctrl->vreg;
-+
-+		rng_vid = (rd_reg32(&vreg->rng) & CHA_VER_VID_MASK) >>
-+			  CHA_VER_VID_SHIFT;
-+	}
-+
-+	/*
-+	 * If SEC has RNG version >= 4 and RNG state handle has not been
-+	 * already instantiated, do RNG instantiation
-+	 * In case of SoCs with Management Complex, RNG is managed by MC f/w.
-+	 */
-+	if (!ctrlpriv->mc_en && rng_vid >= 4) {
-+		ctrlpriv->rng4_sh_init =
-+			rd_reg32(&ctrl->r4tst[0].rdsta);
-+		/*
-+		 * If the secure keys (TDKEK, JDKEK, TDSK), were already
-+		 * generated, signal this to the function that is instantiating
-+		 * the state handles. An error would occur if RNG4 attempts
-+		 * to regenerate these keys before the next POR.
-+		 */
-+		gen_sk = ctrlpriv->rng4_sh_init & RDSTA_SKVN ? 0 : 1;
-+		ctrlpriv->rng4_sh_init &= RDSTA_IFMASK;
-+		do {
-+			int inst_handles =
-+				rd_reg32(&ctrl->r4tst[0].rdsta) &
-+								RDSTA_IFMASK;
-+			/*
-+			 * If either SH were instantiated by somebody else
-+			 * (e.g. u-boot) then it is assumed that the entropy
-+			 * parameters are properly set and thus the function
-+			 * setting these (kick_trng(...)) is skipped.
-+			 * Also, if a handle was instantiated, do not change
-+			 * the TRNG parameters.
-+			 */
-+			if (!(ctrlpriv->rng4_sh_init || inst_handles)) {
-+				dev_info(dev,
-+					 "Entropy delay = %u\n",
-+					 ent_delay);
-+				kick_trng(dev, ent_delay);
-+				ent_delay += 400;
-+			}
-+			/*
-+			 * if instantiate_rng(...) fails, the loop will rerun
-+			 * and the kick_trng(...) function will modify the
-+			 * upper and lower limits of the entropy sampling
-+			 * interval, leading to a sucessful initialization of
-+			 * the RNG.
-+			 */
-+			ret = instantiate_rng(dev, inst_handles,
-+					      gen_sk);
-+			if (ret == -EAGAIN)
-+				/*
-+				 * if here, the loop will rerun,
-+				 * so don't hog the CPU
-+				 */
-+				cpu_relax();
-+		} while ((ret == -EAGAIN) && (ent_delay < RTSDCTL_ENT_DLY_MAX));
-+		if (ret) {
-+			dev_err(dev, "failed to instantiate RNG");
-+			return ret;
-+		}
-+		/*
-+		 * Set handles init'ed by this module as the complement of the
-+		 * already initialized ones
-+		 */
-+		ctrlpriv->rng4_sh_init = ~ctrlpriv->rng4_sh_init & RDSTA_IFMASK;
-+
-+		/* Enable RDB bit so that RNG works faster */
-+		clrsetbits_32(&ctrl->scfgr, 0, SCFGR_RDBENABLE);
-+	}
-+
-+	return 0;
-+}
-+
- /* Probe routine for CAAM top (controller) level */
- static int caam_probe(struct platform_device *pdev)
- {
--	int ret, ring, gen_sk, ent_delay = RTSDCTL_ENT_DLY_MIN;
-+	int ret, ring;
- 	u64 caam_id;
- 	const struct soc_device_attribute *imx_soc_match;
- 	static struct platform_device_info caam_dma_pdev_info = {
-@@ -592,7 +686,6 @@ static int caam_probe(struct platform_de
- 	struct dentry *dfs_root;
- #endif
- 	u32 scfgr, comp_params;
--	u8 rng_vid;
- 	int pg_size;
- 	int BLOCK_OFFSET = 0;
- 	bool reg_access = true;
-@@ -875,90 +968,12 @@ set_dma_mask:
- 			return ret;
- 	}
- 
--	if (!reg_access)
--		goto report_live;
--
--	if (ctrlpriv->era < 10) {
--		rng_vid = (rd_reg32(&perfmon->cha_id_ls) &
--			   CHA_ID_LS_RNG_MASK) >> CHA_ID_LS_RNG_SHIFT;
--	} else {
--		struct version_regs __iomem *vreg;
--
--		vreg = ring ? (struct version_regs *)&ctrlpriv->jr[0]->vreg :
--			      (struct version_regs *)&ctrl->vreg;
--
--		rng_vid = (rd_reg32(&vreg->rng) & CHA_VER_VID_MASK) >>
--			   CHA_VER_VID_SHIFT;
--	}
--
--	/*
--	 * If SEC has RNG version >= 4 and RNG state handle has not been
--	 * already instantiated, do RNG instantiation
--	 * In case of SoCs with Management Complex, RNG is managed by MC f/w.
--	 */
--	if (!ctrlpriv->mc_en && rng_vid >= 4) {
--		ctrlpriv->rng4_sh_init =
--			rd_reg32(&ctrl->r4tst[0].rdsta);
--		/*
--		 * If the secure keys (TDKEK, JDKEK, TDSK), were already
--		 * generated, signal this to the function that is instantiating
--		 * the state handles. An error would occur if RNG4 attempts
--		 * to regenerate these keys before the next POR.
--		 */
--		gen_sk = ctrlpriv->rng4_sh_init & RDSTA_SKVN ? 0 : 1;
--		ctrlpriv->rng4_sh_init &= RDSTA_IFMASK;
--		do {
--			int inst_handles =
--				rd_reg32(&ctrl->r4tst[0].rdsta) &
--								RDSTA_IFMASK;
--			/*
--			 * If either SH were instantiated by somebody else
--			 * (e.g. u-boot) then it is assumed that the entropy
--			 * parameters are properly set and thus the function
--			 * setting these (kick_trng(...)) is skipped.
--			 * Also, if a handle was instantiated, do not change
--			 * the TRNG parameters.
--			 */
--			if (!(ctrlpriv->rng4_sh_init || inst_handles)) {
--				dev_info(dev,
--					 "Entropy delay = %u\n",
--					 ent_delay);
--				kick_trng(pdev, ent_delay);
--				ent_delay += 400;
--			}
--			/*
--			 * if instantiate_rng(...) fails, the loop will rerun
--			 * and the kick_trng(...) function will modfiy the
--			 * upper and lower limits of the entropy sampling
--			 * interval, leading to a sucessful initialization of
--			 * the RNG.
--			 */
--			ret = instantiate_rng(dev, inst_handles,
--					      gen_sk);
--			if (ret == -EAGAIN)
--				/*
--				 * if here, the loop will rerun,
--				 * so don't hog the CPU
--				 */
--				cpu_relax();
--		} while ((ret == -EAGAIN) && (ent_delay < RTSDCTL_ENT_DLY_MAX));
--		if (ret) {
--			dev_err(dev, "failed to instantiate RNG");
-+	if (reg_access) {
-+		ret = caam_ctrl_rng_init(dev);
-+		if (ret)
- 			return ret;
--		}
--		/*
--		 * Set handles init'ed by this module as the complement of the
--		 * already initialized ones
--		 */
--		ctrlpriv->rng4_sh_init = ~ctrlpriv->rng4_sh_init & RDSTA_IFMASK;
--
--		/* Enable RDB bit so that RNG works faster */
--		clrsetbits_32(&ctrl->scfgr, 0, SCFGR_RDBENABLE);
- 	}
- 
--	/* NOTE: RTIC detection ought to go here, around Si time */
--
--report_live:
- 	caam_id = (u64)rd_reg32(&perfmon->caam_id_ms) << 32 |
- 		  (u64)rd_reg32(&perfmon->caam_id_ls);
- 
diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0041-LF-292-2-crypto-caam-add-power-management.patch b/target/linux/layerscape/patches-5.4/804-crypto-0041-LF-292-2-crypto-caam-add-power-management.patch
deleted file mode 100644
index 2a518790ed..0000000000
--- a/target/linux/layerscape/patches-5.4/804-crypto-0041-LF-292-2-crypto-caam-add-power-management.patch
+++ /dev/null
@@ -1,570 +0,0 @@
-From e8aeb8bbd925b50555c70ad4be86cf7d8e8767a6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Horia=20Geant=C4=83?= <horia.geanta@nxp.com>
-Date: Fri, 21 Feb 2020 11:48:40 +0100
-Subject: [PATCH] LF-292-2 crypto: caam - add power management
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add support for suspend and resume operation for PM in CAAM driver.
-
-When the CAAM goes in suspend, the hardware is considered to do nothing.
-
-On some platforms, the power of the CAAM is not turned off so it keeps
-its configuration.
-
-On other platforms, it doesn't so it is necessary to save the state of
-the CAAM:
- - JRs MID
- - Address of input and output rings
-
-Limitation:
-When the CAAM is powered OFF, it is resetted so the JDKEK and TDKEK
-changes. This impacts crypto transforms using MDHA split-keys
-which are kept over suspend as they are encrypted with the JDKEK:
- - hmac(*) from caamhash.c
- - authenc(hmac(*),*) from caamalg.c
- - echainiv(authenc(hmac(*),*)) from caamalg.c
-The issue was already present in current code so this patch does not
-add a regression in this regard.
-
-Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
-Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
-(cherry picked from commit c151af80cfda82eae533a80fb2bb0158dffe556d)
-
-Differences vs. i.MX BSP:
--RNG re-initialization done in ctrl, not in jr
-
-The fix for MLK-22518 (drivers: crypto: caam: jr: Allow quiesce when quiesced)
-is integrated in this patch.
-
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
-Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
-Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- drivers/crypto/caam/ctrl.c   | 116 +++++++++++++++++++++++
- drivers/crypto/caam/intern.h |  31 ++++++
- drivers/crypto/caam/jr.c     | 219 ++++++++++++++++++++++++++++++++++++-------
- drivers/crypto/caam/regs.h   |   3 +-
- 4 files changed, 333 insertions(+), 36 deletions(-)
-
---- a/drivers/crypto/caam/ctrl.c
-+++ b/drivers/crypto/caam/ctrl.c
-@@ -665,6 +665,115 @@ static int caam_ctrl_rng_init(struct dev
- 	return 0;
- }
- 
-+#ifdef CONFIG_PM_SLEEP
-+
-+/* Indicate if the internal state of the CAAM is lost during PM */
-+static int caam_off_during_pm(void)
-+{
-+	bool not_off_during_pm = of_machine_is_compatible("fsl,imx6q") ||
-+				 of_machine_is_compatible("fsl,imx6qp") ||
-+				 of_machine_is_compatible("fsl,imx6dl");
-+
-+	return not_off_during_pm ? 0 : 1;
-+}
-+
-+static void caam_state_save(struct device *dev)
-+{
-+	struct caam_drv_private *ctrlpriv = dev_get_drvdata(dev);
-+	struct caam_ctl_state *state = &ctrlpriv->state;
-+	struct caam_ctrl __iomem *ctrl = ctrlpriv->ctrl;
-+	u32 deco_inst, jr_inst;
-+	int i;
-+
-+	state->mcr = rd_reg32(&ctrl->mcr);
-+	state->scfgr = rd_reg32(&ctrl->scfgr);
-+
-+	deco_inst = (rd_reg32(&ctrl->perfmon.cha_num_ms) &
-+		     CHA_ID_MS_DECO_MASK) >> CHA_ID_MS_DECO_SHIFT;
-+	for (i = 0; i < deco_inst; i++) {
-+		state->deco_mid[i].liodn_ms =
-+			rd_reg32(&ctrl->deco_mid[i].liodn_ms);
-+		state->deco_mid[i].liodn_ls =
-+			rd_reg32(&ctrl->deco_mid[i].liodn_ls);
-+	}
-+
-+	jr_inst = (rd_reg32(&ctrl->perfmon.cha_num_ms) &
-+		   CHA_ID_MS_JR_MASK) >> CHA_ID_MS_JR_SHIFT;
-+	for (i = 0; i < jr_inst; i++) {
-+		state->jr_mid[i].liodn_ms =
-+			rd_reg32(&ctrl->jr_mid[i].liodn_ms);
-+		state->jr_mid[i].liodn_ls =
-+			rd_reg32(&ctrl->jr_mid[i].liodn_ls);
-+	}
-+}
-+
-+static void caam_state_restore(const struct device *dev)
-+{
-+	const struct caam_drv_private *ctrlpriv = dev_get_drvdata(dev);
-+	const struct caam_ctl_state *state = &ctrlpriv->state;
-+	struct caam_ctrl __iomem *ctrl = ctrlpriv->ctrl;
-+	u32 deco_inst, jr_inst;
-+	int i;
-+
-+	wr_reg32(&ctrl->mcr, state->mcr);
-+	wr_reg32(&ctrl->scfgr, state->scfgr);
-+
-+	deco_inst = (rd_reg32(&ctrl->perfmon.cha_num_ms) &
-+		     CHA_ID_MS_DECO_MASK) >> CHA_ID_MS_DECO_SHIFT;
-+	for (i = 0; i < deco_inst; i++) {
-+		wr_reg32(&ctrl->deco_mid[i].liodn_ms,
-+			 state->deco_mid[i].liodn_ms);
-+		wr_reg32(&ctrl->deco_mid[i].liodn_ls,
-+			 state->deco_mid[i].liodn_ls);
-+	}
-+
-+	jr_inst = (rd_reg32(&ctrl->perfmon.cha_num_ms) &
-+		   CHA_ID_MS_JR_MASK) >> CHA_ID_MS_JR_SHIFT;
-+	for (i = 0; i < ctrlpriv->total_jobrs; i++) {
-+		wr_reg32(&ctrl->jr_mid[i].liodn_ms,
-+			 state->jr_mid[i].liodn_ms);
-+		wr_reg32(&ctrl->jr_mid[i].liodn_ls,
-+			 state->jr_mid[i].liodn_ls);
-+	}
-+
-+	if (ctrlpriv->virt_en == 1)
-+		clrsetbits_32(&ctrl->jrstart, 0, JRSTART_JR0_START |
-+			      JRSTART_JR1_START | JRSTART_JR2_START |
-+			      JRSTART_JR3_START);
-+}
-+
-+static int caam_ctrl_suspend(struct device *dev)
-+{
-+	const struct caam_drv_private *ctrlpriv = dev_get_drvdata(dev);
-+
-+	if (ctrlpriv->caam_off_during_pm && !ctrlpriv->scu_en &&
-+	    !ctrlpriv->optee_en)
-+		caam_state_save(dev);
-+
-+	return 0;
-+}
-+
-+static int caam_ctrl_resume(struct device *dev)
-+{
-+	struct caam_drv_private *ctrlpriv = dev_get_drvdata(dev);
-+	int ret = 0;
-+
-+	if (ctrlpriv->caam_off_during_pm && !ctrlpriv->scu_en &&
-+	    !ctrlpriv->optee_en) {
-+		caam_state_restore(dev);
-+
-+		/* HW and rng will be reset so deinstantiation can be removed */
-+		devm_remove_action(dev, devm_deinstantiate_rng, dev);
-+		ret = caam_ctrl_rng_init(dev);
-+	}
-+
-+	return ret;
-+}
-+
-+SIMPLE_DEV_PM_OPS(caam_ctrl_pm_ops, caam_ctrl_suspend, caam_ctrl_resume);
-+
-+#endif /* CONFIG_PM_SLEEP */
-+
- /* Probe routine for CAAM top (controller) level */
- static int caam_probe(struct platform_device *pdev)
- {
-@@ -701,6 +810,10 @@ static int caam_probe(struct platform_de
- 	imx_soc_match = soc_device_match(caam_imx_soc_table);
- 	caam_imx = (bool)imx_soc_match;
- 
-+#ifdef CONFIG_PM_SLEEP
-+	ctrlpriv->caam_off_during_pm = caam_imx && caam_off_during_pm();
-+#endif
-+
- 	if (imx_soc_match) {
- 		np = of_find_compatible_node(NULL, NULL, "fsl,imx-scu");
- 		ctrlpriv->scu_en = !!np;
-@@ -1049,6 +1162,9 @@ static struct platform_driver caam_drive
- 	.driver = {
- 		.name = "caam",
- 		.of_match_table = caam_match,
-+#ifdef CONFIG_PM_SLEEP
-+		.pm = &caam_ctrl_pm_ops,
-+#endif
- 	},
- 	.probe       = caam_probe,
- };
---- a/drivers/crypto/caam/intern.h
-+++ b/drivers/crypto/caam/intern.h
-@@ -38,6 +38,18 @@ struct caam_jrentry_info {
- 	u32 desc_size;	/* Stored size for postprocessing, header derived */
- };
- 
-+#ifdef CONFIG_PM_SLEEP
-+struct caam_jr_state {
-+	dma_addr_t inpbusaddr;
-+	dma_addr_t outbusaddr;
-+};
-+#endif
-+
-+struct caam_jr_dequeue_params {
-+	struct device *dev;
-+	int enable_itr;
-+};
-+
- /* Private sub-storage for a single JobR */
- struct caam_drv_private_jr {
- 	struct list_head	list_node;	/* Job Ring device list */
-@@ -45,6 +57,7 @@ struct caam_drv_private_jr {
- 	int ridx;
- 	struct caam_job_ring __iomem *rregs;	/* JobR's register space */
- 	struct tasklet_struct irqtask;
-+	struct caam_jr_dequeue_params tasklet_params;
- 	int irq;			/* One per queue */
- 
- 	/* Number of scatterlist crypt transforms active on the JobR */
-@@ -60,7 +73,20 @@ struct caam_drv_private_jr {
- 	int out_ring_read_index;	/* Output index "tail" */
- 	int tail;			/* entinfo (s/w ring) tail index */
- 	void *outring;			/* Base of output ring, DMA-safe */
-+
-+#ifdef CONFIG_PM_SLEEP
-+	struct caam_jr_state state;	/* State of the JR during PM */
-+#endif
-+};
-+
-+#ifdef CONFIG_PM_SLEEP
-+struct caam_ctl_state {
-+	struct masterid deco_mid[16];
-+	struct masterid jr_mid[4];
-+	u32 mcr;
-+	u32 scfgr;
- };
-+#endif
- 
- /*
-  * Driver-private storage for a single CAAM block instance
-@@ -109,6 +135,11 @@ struct caam_drv_private {
- 	struct dentry *ctl; /* controller dir */
- 	struct debugfs_blob_wrapper ctl_kek_wrap, ctl_tkek_wrap, ctl_tdsk_wrap;
- #endif
-+
-+#ifdef CONFIG_PM_SLEEP
-+	int caam_off_during_pm;		/* If the CAAM is reset after suspend */
-+	struct caam_ctl_state state;	/* State of the CTL during PM */
-+#endif
- };
- 
- #ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API
---- a/drivers/crypto/caam/jr.c
-+++ b/drivers/crypto/caam/jr.c
-@@ -72,19 +72,27 @@ int caam_jr_driver_probed(void)
- }
- EXPORT_SYMBOL(caam_jr_driver_probed);
- 
--static int caam_reset_hw_jr(struct device *dev)
-+/*
-+ * Put the CAAM in quiesce, ie stop
-+ *
-+ * Must be called with itr disabled
-+ */
-+static int caam_jr_stop_processing(struct device *dev, u32 jrcr_bits)
- {
- 	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
- 	unsigned int timeout = 100000;
- 
--	/*
--	 * mask interrupts since we are going to poll
--	 * for reset completion status
--	 */
--	clrsetbits_32(&jrp->rregs->rconfig_lo, 0, JRCFG_IMSK);
-+	/* Check the current status */
-+	if (rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_INPROGRESS)
-+		goto wait_quiesce_completion;
- 
--	/* initiate flush (required prior to reset) */
--	wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
-+	/* Reset the field */
-+	clrsetbits_32(&jrp->rregs->jrintstatus, JRINT_ERR_HALT_MASK, 0);
-+
-+	/* initiate flush / park (required prior to reset) */
-+	wr_reg32(&jrp->rregs->jrcommand, jrcr_bits);
-+
-+wait_quiesce_completion:
- 	while (((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) ==
- 		JRINT_ERR_HALT_INPROGRESS) && --timeout)
- 		cpu_relax();
-@@ -95,8 +103,56 @@ static int caam_reset_hw_jr(struct devic
- 		return -EIO;
- 	}
- 
-+	return 0;
-+}
-+
-+/*
-+ * Flush the job ring, so the jobs running will be stopped, jobs queued will be
-+ * invalidated and the CAAM will no longer fetch fron input ring.
-+ *
-+ * Must be called with itr disabled
-+ */
-+static int caam_jr_flush(struct device *dev)
-+{
-+	return caam_jr_stop_processing(dev, JRCR_RESET);
-+}
-+
-+#ifdef CONFIG_PM_SLEEP
-+/* The resume can be used after a park or a flush if CAAM has not been reset */
-+static int caam_jr_restart_processing(struct device *dev)
-+{
-+	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
-+	u32 halt_status = rd_reg32(&jrp->rregs->jrintstatus) &
-+			  JRINT_ERR_HALT_MASK;
-+
-+	/* Check that the flush/park is completed */
-+	if (halt_status != JRINT_ERR_HALT_COMPLETE)
-+		return -1;
-+
-+	/* Resume processing of jobs */
-+	clrsetbits_32(&jrp->rregs->jrintstatus, 0, JRINT_ERR_HALT_COMPLETE);
-+
-+	return 0;
-+}
-+#endif /* CONFIG_PM_SLEEP */
-+
-+static int caam_reset_hw_jr(struct device *dev)
-+{
-+	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
-+	unsigned int timeout = 100000;
-+	int err;
-+
-+	/*
-+	 * mask interrupts since we are going to poll
-+	 * for reset completion status
-+	 */
-+	clrsetbits_32(&jrp->rregs->rconfig_lo, 0, JRCFG_IMSK);
-+
-+	err = caam_jr_flush(dev);
-+	if (err)
-+		return err;
-+
- 	/* initiate reset */
--	timeout = 100000;
- 	wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
- 	while ((rd_reg32(&jrp->rregs->jrcommand) & JRCR_RESET) && --timeout)
- 		cpu_relax();
-@@ -204,7 +260,8 @@ static irqreturn_t caam_jr_interrupt(int
- static void caam_jr_dequeue(unsigned long devarg)
- {
- 	int hw_idx, sw_idx, i, head, tail;
--	struct device *dev = (struct device *)devarg;
-+	struct caam_jr_dequeue_params *params = (void *)devarg;
-+	struct device *dev = params->dev;
- 	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
- 	void (*usercall)(struct device *dev, u32 *desc, u32 status, void *arg);
- 	u32 *userdesc, userstatus;
-@@ -278,8 +335,9 @@ static void caam_jr_dequeue(unsigned lon
- 		outring_used--;
- 	}
- 
--	/* reenable / unmask IRQs */
--	clrsetbits_32(&jrp->rregs->rconfig_lo, JRCFG_IMSK, 0);
-+	if (params->enable_itr)
-+		/* reenable / unmask IRQs */
-+		clrsetbits_32(&jrp->rregs->rconfig_lo, JRCFG_IMSK, 0);
- }
- 
- /**
-@@ -467,6 +525,29 @@ int caam_jr_enqueue(struct device *dev,
- }
- EXPORT_SYMBOL(caam_jr_enqueue);
- 
-+static void caam_jr_init_hw(struct device *dev, dma_addr_t inpbusaddr,
-+			    dma_addr_t outbusaddr)
-+{
-+	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
-+
-+	wr_reg64(&jrp->rregs->inpring_base, inpbusaddr);
-+	wr_reg64(&jrp->rregs->outring_base, outbusaddr);
-+	wr_reg32(&jrp->rregs->inpring_size, JOBR_DEPTH);
-+	wr_reg32(&jrp->rregs->outring_size, JOBR_DEPTH);
-+
-+	/* Select interrupt coalescing parameters */
-+	clrsetbits_32(&jrp->rregs->rconfig_lo, 0, JOBR_INTC |
-+		      (JOBR_INTC_COUNT_THLD << JRCFG_ICDCT_SHIFT) |
-+		      (JOBR_INTC_TIME_THLD << JRCFG_ICTT_SHIFT));
-+}
-+
-+static void caam_jr_reset_index(struct caam_drv_private_jr *jrp)
-+{
-+	jrp->out_ring_read_index = 0;
-+	jrp->head = 0;
-+	jrp->tail = 0;
-+}
-+
- /*
-  * Init JobR independent of platform property detection
-  */
-@@ -503,25 +584,16 @@ static int caam_jr_init(struct device *d
- 		jrp->entinfo[i].desc_addr_dma = !0;
- 
- 	/* Setup rings */
--	jrp->out_ring_read_index = 0;
--	jrp->head = 0;
--	jrp->tail = 0;
--
--	wr_reg64(&jrp->rregs->inpring_base, inpbusaddr);
--	wr_reg64(&jrp->rregs->outring_base, outbusaddr);
--	wr_reg32(&jrp->rregs->inpring_size, JOBR_DEPTH);
--	wr_reg32(&jrp->rregs->outring_size, JOBR_DEPTH);
--
-+	caam_jr_reset_index(jrp);
- 	jrp->inpring_avail = JOBR_DEPTH;
-+	caam_jr_init_hw(dev, inpbusaddr, outbusaddr);
- 
- 	spin_lock_init(&jrp->inplock);
- 
--	/* Select interrupt coalescing parameters */
--	clrsetbits_32(&jrp->rregs->rconfig_lo, 0, JOBR_INTC |
--		      (JOBR_INTC_COUNT_THLD << JRCFG_ICDCT_SHIFT) |
--		      (JOBR_INTC_TIME_THLD << JRCFG_ICTT_SHIFT));
--
--	tasklet_init(&jrp->irqtask, caam_jr_dequeue, (unsigned long)dev);
-+	jrp->tasklet_params.dev = dev;
-+	jrp->tasklet_params.enable_itr = 1;
-+	tasklet_init(&jrp->irqtask, caam_jr_dequeue,
-+		     (unsigned long)&jrp->tasklet_params);
- 
- 	/* Connect job ring interrupt handler. */
- 	error = devm_request_irq(dev, jrp->irq, caam_jr_interrupt, IRQF_SHARED,
-@@ -620,14 +692,48 @@ static int caam_jr_probe(struct platform
- 	return 0;
- }
- 
--#ifdef CONFIG_PM
-+#ifdef CONFIG_PM_SLEEP
-+static void caam_jr_get_hw_state(struct device *dev)
-+{
-+	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
-+
-+	jrp->state.inpbusaddr = rd_reg64(&jrp->rregs->inpring_base);
-+	jrp->state.outbusaddr = rd_reg64(&jrp->rregs->outring_base);
-+}
-+
- static int caam_jr_suspend(struct device *dev)
- {
- 	struct platform_device *pdev = to_platform_device(dev);
- 	struct caam_drv_private_jr *jrpriv = platform_get_drvdata(pdev);
-+	struct caam_drv_private *ctrlpriv = dev_get_drvdata(dev->parent);
-+	struct caam_jr_dequeue_params suspend_params = {
-+		.dev = dev,
-+		.enable_itr = 0,
-+	};
-+
-+	if (ctrlpriv->caam_off_during_pm) {
-+		int err;
-+
-+		tasklet_disable(&jrpriv->irqtask);
-+
-+		/* mask itr to call flush */
-+		clrsetbits_32(&jrpriv->rregs->rconfig_lo, 0, JRCFG_IMSK);
-+
-+		/* Invalid job in process */
-+		err = caam_jr_flush(dev);
-+		if (err) {
-+			dev_err(dev, "Failed to flush\n");
-+			return err;
-+		}
-+
-+		/* Dequeing jobs flushed */
-+		caam_jr_dequeue((unsigned long)&suspend_params);
- 
--	if (device_may_wakeup(&pdev->dev))
-+		/* Save state */
-+		caam_jr_get_hw_state(dev);
-+	} else if (device_may_wakeup(&pdev->dev)) {
- 		enable_irq_wake(jrpriv->irq);
-+	}
- 
- 	return 0;
- }
-@@ -636,16 +742,61 @@ static int caam_jr_resume(struct device
- {
- 	struct platform_device *pdev = to_platform_device(dev);
- 	struct caam_drv_private_jr *jrpriv = platform_get_drvdata(pdev);
-+	struct caam_drv_private *ctrlpriv = dev_get_drvdata(dev->parent);
- 
--	if (device_may_wakeup(&pdev->dev))
-+	if (ctrlpriv->caam_off_during_pm) {
-+		u64 inp_addr;
-+		int err;
-+
-+		/*
-+		 * Check if the CAAM has been resetted checking the address of
-+		 * the input ring
-+		 */
-+		inp_addr = rd_reg64(&jrpriv->rregs->inpring_base);
-+		if (inp_addr != 0) {
-+			/* JR still has some configuration */
-+			if (inp_addr == jrpriv->state.inpbusaddr) {
-+				/* JR has not been resetted */
-+				err = caam_jr_restart_processing(dev);
-+				if (err) {
-+					dev_err(dev,
-+						"Restart processing failed\n");
-+					return err;
-+				}
-+
-+				tasklet_enable(&jrpriv->irqtask);
-+
-+				clrsetbits_32(&jrpriv->rregs->rconfig_lo,
-+					      JRCFG_IMSK, 0);
-+
-+				return 0;
-+			} else if (ctrlpriv->optee_en) {
-+				/* JR has been used by OPTEE, reset it */
-+				err = caam_reset_hw_jr(dev);
-+				if (err) {
-+					dev_err(dev, "Failed to reset JR\n");
-+					return err;
-+				}
-+			} else {
-+				/* No explanation, return error */
-+				return -EIO;
-+			}
-+		}
-+
-+		caam_jr_reset_index(jrpriv);
-+		caam_jr_init_hw(dev, jrpriv->state.inpbusaddr,
-+				jrpriv->state.outbusaddr);
-+
-+		tasklet_enable(&jrpriv->irqtask);
-+	} else if (device_may_wakeup(&pdev->dev)) {
- 		disable_irq_wake(jrpriv->irq);
-+	}
- 
- 	return 0;
- }
- 
--static SIMPLE_DEV_PM_OPS(caam_jr_pm_ops, caam_jr_suspend,
--			 caam_jr_resume);
--#endif
-+SIMPLE_DEV_PM_OPS(caam_jr_pm_ops, caam_jr_suspend, caam_jr_resume);
-+#endif /* CONFIG_PM_SLEEP */
- 
- static const struct of_device_id caam_jr_match[] = {
- 	{
-@@ -662,7 +813,7 @@ static struct platform_driver caam_jr_dr
- 	.driver = {
- 		.name = "caam_jr",
- 		.of_match_table = caam_jr_match,
--#ifdef CONFIG_PM
-+#ifdef CONFIG_PM_SLEEP
- 		.pm = &caam_jr_pm_ops,
- #endif
- 	},
---- a/drivers/crypto/caam/regs.h
-+++ b/drivers/crypto/caam/regs.h
-@@ -634,8 +634,7 @@ struct caam_ctrl {
- 	u32 deco_rsr;			/* DECORSR - Deco Request Source */
- 	u32 rsvd11;
- 	u32 deco_rq;			/* DECORR - DECO Request */
--	struct masterid deco_mid[5];	/* DECOxLIODNR - 1 per DECO */
--	u32 rsvd5[22];
-+	struct masterid deco_mid[16];	/* DECOxLIODNR - 1 per DECO */
- 
- 	/* DECO Availability/Reset Section			120-3ff */
- 	u32 deco_avail;		/* DAR - DECO availability */
diff --git a/target/linux/layerscape/patches-5.4/805-display-0001-drm-arm-mali-dp-Add-display-QoS-interface-configurat.patch b/target/linux/layerscape/patches-5.4/805-display-0001-drm-arm-mali-dp-Add-display-QoS-interface-configurat.patch
deleted file mode 100644
index c27e34fc0b..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0001-drm-arm-mali-dp-Add-display-QoS-interface-configurat.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From dae2475df84cd77c6f7245984869897c0eb0f84e Mon Sep 17 00:00:00 2001
-From: Wen He <wen.he_1@nxp.com>
-Date: Tue, 10 Sep 2019 15:01:00 +0800
-Subject: [PATCH] drm/arm/mali-dp: Add display QoS interface configuration for
- Mali DP500
-
-Configure the display Quality of service (QoS) levels priority if the
-optional property node "arm,malidp-aqros-value" is defined in DTS file.
-
-QoS signaling using AQROS and AWQOS AXI interface signals, the AQROS is
-driven from the "RQOS" register, so needed to program the RQOS register
-to avoid the high resolutions flicker issue on the LS1028A platform.
-
-Signed-off-by: Wen He <wen.he_1@nxp.com>
----
- drivers/gpu/drm/arm/malidp_drv.c  |  6 ++++++
- drivers/gpu/drm/arm/malidp_hw.c   |  9 +++++++++
- drivers/gpu/drm/arm/malidp_hw.h   |  3 +++
- drivers/gpu/drm/arm/malidp_regs.h | 10 ++++++++++
- 4 files changed, 28 insertions(+)
-
---- a/drivers/gpu/drm/arm/malidp_drv.c
-+++ b/drivers/gpu/drm/arm/malidp_drv.c
-@@ -817,6 +817,12 @@ static int malidp_bind(struct device *de
- 
- 	malidp->core_id = version;
- 
-+	ret = of_property_read_u32(dev->of_node,
-+					"arm,malidp-arqos-value",
-+					&hwdev->arqos_value);
-+	if (ret)
-+		hwdev->arqos_value = 0x0;
-+
- 	/* set the number of lines used for output of RGB data */
- 	ret = of_property_read_u8_array(dev->of_node,
- 					"arm,malidp-output-port-lines",
---- a/drivers/gpu/drm/arm/malidp_hw.c
-+++ b/drivers/gpu/drm/arm/malidp_hw.c
-@@ -379,6 +379,15 @@ static void malidp500_modeset(struct mal
- 		malidp_hw_setbits(hwdev, MALIDP_DISP_FUNC_ILACED, MALIDP_DE_DISPLAY_FUNC);
- 	else
- 		malidp_hw_clearbits(hwdev, MALIDP_DISP_FUNC_ILACED, MALIDP_DE_DISPLAY_FUNC);
-+
-+	/*
-+	 * Program the RQoS register to avoid high resolutions flicker
-+	 * issue on the LS1028A.
-+	 */
-+	if (hwdev->arqos_value) {
-+		val = hwdev->arqos_value;
-+		malidp_hw_setbits(hwdev, val, MALIDP500_RQOS_QUALITY);
-+	}
- }
- 
- int malidp_format_get_bpp(u32 fmt)
---- a/drivers/gpu/drm/arm/malidp_hw.h
-+++ b/drivers/gpu/drm/arm/malidp_hw.h
-@@ -251,6 +251,9 @@ struct malidp_hw_device {
- 
- 	/* size of memory used for rotating layers, up to two banks available */
- 	u32 rotation_memory[2];
-+
-+	/* priority level of RQOS register used for driven the ARQOS signal */
-+	u32 arqos_value;
- };
- 
- static inline u32 malidp_hw_read(struct malidp_hw_device *hwdev, u32 reg)
---- a/drivers/gpu/drm/arm/malidp_regs.h
-+++ b/drivers/gpu/drm/arm/malidp_regs.h
-@@ -210,6 +210,16 @@
- #define MALIDP500_CONFIG_VALID		0x00f00
- #define MALIDP500_CONFIG_ID		0x00fd4
- 
-+/*
-+ * The quality of service (QoS) register on the DP500. RQOS register values
-+ * are driven by the ARQOS signal, using AXI transacations, dependent on the
-+ * FIFO input level.
-+ * The RQOS register can also set QoS levels for:
-+ *    - RED_ARQOS   @ A 4-bit signal value for close to underflow conditions
-+ *    - GREEN_ARQOS @ A 4-bit signal value for normal conditions
-+ */
-+#define MALIDP500_RQOS_QUALITY          0x00500
-+
- /* register offsets and bits specific to DP550/DP650 */
- #define MALIDP550_ADDR_SPACE_SIZE	0x10000
- #define MALIDP550_DE_CONTROL		0x00010
diff --git a/target/linux/layerscape/patches-5.4/805-display-0002-drm-rockchip-prepare-common-code-for-cdns-and-rk-dpi.patch b/target/linux/layerscape/patches-5.4/805-display-0002-drm-rockchip-prepare-common-code-for-cdns-and-rk-dpi.patch
deleted file mode 100644
index 8ce4380664..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0002-drm-rockchip-prepare-common-code-for-cdns-and-rk-dpi.patch
+++ /dev/null
@@ -1,1943 +0,0 @@
-From 2a77bbf7f6494d4d618fc6ff70b1a21f04cb8a22 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Wed, 10 Jul 2019 10:50:25 +0800
-Subject: [PATCH] drm/rockchip: prepare common code for cdns and rk dpi/dp
- driver
-
-- Extracted common fields from cdn_dp_device to a new cdns_mhdp_device
-  structure which will be used by two separate drivers later on.
-- Moved some datatypes (audio_format, audio_info,
-  vic_pxl_encoding_format, video_info) from cdn-dp-core.c to cdn-dp-reg.h.
-- Changed prefixes from cdn_dp to cdns_mhdp cdn -> cdns to match the other Cadence's drivers
-  dp -> mhdp to distinguish it from a "just a DP" as the IP underneath this registers map can be a HDMI (which is
-  internally different, but the interface for commands, events is pretty much the same).
-- Modified cdn-dp-core.c to use the new driver structure and new function names.
-
-Signed-off-by: Damian Kos<dkos@cadence.com>
-Reviewed-by: Andrzej Hajda<a.hajda@samsung.com>
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/rockchip/cdn-dp-core.c | 220 +++++++++--------
- drivers/gpu/drm/rockchip/cdn-dp-core.h |  40 +---
- drivers/gpu/drm/rockchip/cdn-dp-reg.c  | 415 +++++++++++++++++----------------
- drivers/gpu/drm/rockchip/cdn-dp-reg.h  | 114 +++++++--
- 4 files changed, 423 insertions(+), 366 deletions(-)
-
---- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
-+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
-@@ -22,11 +22,10 @@
- #include <drm/drm_probe_helper.h>
- 
- #include "cdn-dp-core.h"
--#include "cdn-dp-reg.h"
- #include "rockchip_drm_vop.h"
- 
- #define connector_to_dp(c) \
--		container_of(c, struct cdn_dp_device, connector)
-+		container_of(c, struct cdn_dp_device, mhdp.connector)
- 
- #define encoder_to_dp(c) \
- 		container_of(c, struct cdn_dp_device, encoder)
-@@ -61,17 +60,18 @@ MODULE_DEVICE_TABLE(of, cdn_dp_dt_ids);
- static int cdn_dp_grf_write(struct cdn_dp_device *dp,
- 			    unsigned int reg, unsigned int val)
- {
-+	struct device *dev = dp->mhdp.dev;
- 	int ret;
- 
- 	ret = clk_prepare_enable(dp->grf_clk);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "Failed to prepare_enable grf clock\n");
-+		DRM_DEV_ERROR(dev, "Failed to prepare_enable grf clock\n");
- 		return ret;
- 	}
- 
- 	ret = regmap_write(dp->grf, reg, val);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "Could not write to GRF: %d\n", ret);
-+		DRM_DEV_ERROR(dev, "Could not write to GRF: %d\n", ret);
- 		clk_disable_unprepare(dp->grf_clk);
- 		return ret;
- 	}
-@@ -83,24 +83,25 @@ static int cdn_dp_grf_write(struct cdn_d
- 
- static int cdn_dp_clk_enable(struct cdn_dp_device *dp)
- {
-+	struct device *dev = dp->mhdp.dev;
- 	int ret;
- 	unsigned long rate;
- 
- 	ret = clk_prepare_enable(dp->pclk);
- 	if (ret < 0) {
--		DRM_DEV_ERROR(dp->dev, "cannot enable dp pclk %d\n", ret);
-+		DRM_DEV_ERROR(dev, "cannot enable dp pclk %d\n", ret);
- 		goto err_pclk;
- 	}
- 
- 	ret = clk_prepare_enable(dp->core_clk);
- 	if (ret < 0) {
--		DRM_DEV_ERROR(dp->dev, "cannot enable core_clk %d\n", ret);
-+		DRM_DEV_ERROR(dev, "cannot enable core_clk %d\n", ret);
- 		goto err_core_clk;
- 	}
- 
--	ret = pm_runtime_get_sync(dp->dev);
-+	ret = pm_runtime_get_sync(dev);
- 	if (ret < 0) {
--		DRM_DEV_ERROR(dp->dev, "cannot get pm runtime %d\n", ret);
-+		DRM_DEV_ERROR(dev, "cannot get pm runtime %d\n", ret);
- 		goto err_pm_runtime_get;
- 	}
- 
-@@ -113,18 +114,18 @@ static int cdn_dp_clk_enable(struct cdn_
- 
- 	rate = clk_get_rate(dp->core_clk);
- 	if (!rate) {
--		DRM_DEV_ERROR(dp->dev, "get clk rate failed\n");
-+		DRM_DEV_ERROR(dev, "get clk rate failed\n");
- 		ret = -EINVAL;
- 		goto err_set_rate;
- 	}
- 
--	cdn_dp_set_fw_clk(dp, rate);
--	cdn_dp_clock_reset(dp);
-+	cdns_mhdp_set_fw_clk(&dp->mhdp, rate);
-+	cdns_mhdp_clock_reset(&dp->mhdp);
- 
- 	return 0;
- 
- err_set_rate:
--	pm_runtime_put(dp->dev);
-+	pm_runtime_put(dev);
- err_pm_runtime_get:
- 	clk_disable_unprepare(dp->core_clk);
- err_core_clk:
-@@ -135,7 +136,7 @@ err_pclk:
- 
- static void cdn_dp_clk_disable(struct cdn_dp_device *dp)
- {
--	pm_runtime_put_sync(dp->dev);
-+	pm_runtime_put_sync(dp->mhdp.dev);
- 	clk_disable_unprepare(dp->pclk);
- 	clk_disable_unprepare(dp->core_clk);
- }
-@@ -168,7 +169,7 @@ static int cdn_dp_get_sink_count(struct
- 	u8 value;
- 
- 	*sink_count = 0;
--	ret = cdn_dp_dpcd_read(dp, DP_SINK_COUNT, &value, 1);
-+	ret = cdns_mhdp_dpcd_read(&dp->mhdp, DP_SINK_COUNT, &value, 1);
- 	if (ret)
- 		return ret;
- 
-@@ -192,12 +193,13 @@ static struct cdn_dp_port *cdn_dp_connec
- 
- static bool cdn_dp_check_sink_connection(struct cdn_dp_device *dp)
- {
-+	struct device *dev = dp->mhdp.dev;
- 	unsigned long timeout = jiffies + msecs_to_jiffies(CDN_DPCD_TIMEOUT_MS);
- 	struct cdn_dp_port *port;
- 	u8 sink_count = 0;
- 
- 	if (dp->active_port < 0 || dp->active_port >= dp->ports) {
--		DRM_DEV_ERROR(dp->dev, "active_port is wrong!\n");
-+		DRM_DEV_ERROR(dev, "active_port is wrong!\n");
- 		return false;
- 	}
- 
-@@ -219,7 +221,7 @@ static bool cdn_dp_check_sink_connection
- 		usleep_range(5000, 10000);
- 	}
- 
--	DRM_DEV_ERROR(dp->dev, "Get sink capability timed out\n");
-+	DRM_DEV_ERROR(dev, "Get sink capability timed out\n");
- 	return false;
- }
- 
-@@ -261,7 +263,8 @@ static int cdn_dp_connector_get_modes(st
- 	mutex_lock(&dp->lock);
- 	edid = dp->edid;
- 	if (edid) {
--		DRM_DEV_DEBUG_KMS(dp->dev, "got edid: width[%d] x height[%d]\n",
-+		DRM_DEV_DEBUG_KMS(dp->mhdp.dev,
-+				  "got edid: width[%d] x height[%d]\n",
- 				  edid->width_cm, edid->height_cm);
- 
- 		dp->sink_has_audio = drm_detect_monitor_audio(edid);
-@@ -279,7 +282,8 @@ static int cdn_dp_connector_mode_valid(s
- 				       struct drm_display_mode *mode)
- {
- 	struct cdn_dp_device *dp = connector_to_dp(connector);
--	struct drm_display_info *display_info = &dp->connector.display_info;
-+	struct drm_display_info *display_info =
-+		&dp->mhdp.connector.display_info;
- 	u32 requested, actual, rate, sink_max, source_max = 0;
- 	u8 lanes, bpc;
- 
-@@ -305,7 +309,7 @@ static int cdn_dp_connector_mode_valid(s
- 	sink_max = drm_dp_max_lane_count(dp->dpcd);
- 	lanes = min(source_max, sink_max);
- 
--	source_max = drm_dp_bw_code_to_link_rate(CDN_DP_MAX_LINK_RATE);
-+	source_max = drm_dp_bw_code_to_link_rate(CDNS_DP_MAX_LINK_RATE);
- 	sink_max = drm_dp_max_link_rate(dp->dpcd);
- 	rate = min(source_max, sink_max);
- 
-@@ -315,7 +319,7 @@ static int cdn_dp_connector_mode_valid(s
- 	actual = actual * 8 / 10;
- 
- 	if (requested > actual) {
--		DRM_DEV_DEBUG_KMS(dp->dev,
-+		DRM_DEV_DEBUG_KMS(dp->mhdp.dev,
- 				  "requested=%d, actual=%d, clock=%d\n",
- 				  requested, actual, mode->clock);
- 		return MODE_CLOCK_HIGH;
-@@ -335,28 +339,29 @@ static int cdn_dp_firmware_init(struct c
- 	const u32 *iram_data, *dram_data;
- 	const struct firmware *fw = dp->fw;
- 	const struct cdn_firmware_header *hdr;
-+	struct device *dev = dp->mhdp.dev;
- 
- 	hdr = (struct cdn_firmware_header *)fw->data;
- 	if (fw->size != le32_to_cpu(hdr->size_bytes)) {
--		DRM_DEV_ERROR(dp->dev, "firmware is invalid\n");
-+		DRM_DEV_ERROR(dev, "firmware is invalid\n");
- 		return -EINVAL;
- 	}
- 
- 	iram_data = (const u32 *)(fw->data + hdr->header_size);
- 	dram_data = (const u32 *)(fw->data + hdr->header_size + hdr->iram_size);
- 
--	ret = cdn_dp_load_firmware(dp, iram_data, hdr->iram_size,
--				   dram_data, hdr->dram_size);
-+	ret = cdns_mhdp_load_firmware(&dp->mhdp, iram_data, hdr->iram_size,
-+				      dram_data, hdr->dram_size);
- 	if (ret)
- 		return ret;
- 
--	ret = cdn_dp_set_firmware_active(dp, true);
-+	ret = cdns_mhdp_set_firmware_active(&dp->mhdp, true);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "active ucpu failed: %d\n", ret);
-+		DRM_DEV_ERROR(dev, "active ucpu failed: %d\n", ret);
- 		return ret;
- 	}
- 
--	return cdn_dp_event_config(dp);
-+	return cdns_mhdp_event_config(&dp->mhdp);
- }
- 
- static int cdn_dp_get_sink_capability(struct cdn_dp_device *dp)
-@@ -366,28 +371,29 @@ static int cdn_dp_get_sink_capability(st
- 	if (!cdn_dp_check_sink_connection(dp))
- 		return -ENODEV;
- 
--	ret = cdn_dp_dpcd_read(dp, DP_DPCD_REV, dp->dpcd,
--			       DP_RECEIVER_CAP_SIZE);
-+	ret = cdns_mhdp_dpcd_read(&dp->mhdp, DP_DPCD_REV, dp->dpcd,
-+				  DP_RECEIVER_CAP_SIZE);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "Failed to get caps %d\n", ret);
-+		DRM_DEV_ERROR(dp->mhdp.dev, "Failed to get caps %d\n", ret);
- 		return ret;
- 	}
- 
- 	kfree(dp->edid);
--	dp->edid = drm_do_get_edid(&dp->connector,
--				   cdn_dp_get_edid_block, dp);
-+	dp->edid = drm_do_get_edid(&dp->mhdp.connector,
-+				   cdns_mhdp_get_edid_block, &dp->mhdp);
- 	return 0;
- }
- 
- static int cdn_dp_enable_phy(struct cdn_dp_device *dp, struct cdn_dp_port *port)
- {
-+	struct device *dev = dp->mhdp.dev;
- 	union extcon_property_value property;
- 	int ret;
- 
- 	if (!port->phy_enabled) {
- 		ret = phy_power_on(port->phy);
- 		if (ret) {
--			DRM_DEV_ERROR(dp->dev, "phy power on failed: %d\n",
-+			DRM_DEV_ERROR(dev, "phy power on failed: %d\n",
- 				      ret);
- 			goto err_phy;
- 		}
-@@ -397,28 +403,28 @@ static int cdn_dp_enable_phy(struct cdn_
- 	ret = cdn_dp_grf_write(dp, GRF_SOC_CON26,
- 			       DPTX_HPD_SEL_MASK | DPTX_HPD_SEL);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "Failed to write HPD_SEL %d\n", ret);
-+		DRM_DEV_ERROR(dev, "Failed to write HPD_SEL %d\n", ret);
- 		goto err_power_on;
- 	}
- 
--	ret = cdn_dp_get_hpd_status(dp);
-+	ret = cdns_mhdp_get_hpd_status(&dp->mhdp);
- 	if (ret <= 0) {
- 		if (!ret)
--			DRM_DEV_ERROR(dp->dev, "hpd does not exist\n");
-+			DRM_DEV_ERROR(dev, "hpd does not exist\n");
- 		goto err_power_on;
- 	}
- 
- 	ret = extcon_get_property(port->extcon, EXTCON_DISP_DP,
- 				  EXTCON_PROP_USB_TYPEC_POLARITY, &property);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "get property failed\n");
-+		DRM_DEV_ERROR(dev, "get property failed\n");
- 		goto err_power_on;
- 	}
- 
- 	port->lanes = cdn_dp_get_port_lanes(port);
--	ret = cdn_dp_set_host_cap(dp, port->lanes, property.intval);
-+	ret = cdns_mhdp_set_host_cap(&dp->mhdp, port->lanes, property.intval);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "set host capabilities failed: %d\n",
-+		DRM_DEV_ERROR(dev, "set host capabilities failed: %d\n",
- 			      ret);
- 		goto err_power_on;
- 	}
-@@ -428,7 +434,7 @@ static int cdn_dp_enable_phy(struct cdn_
- 
- err_power_on:
- 	if (phy_power_off(port->phy))
--		DRM_DEV_ERROR(dp->dev, "phy power off failed: %d", ret);
-+		DRM_DEV_ERROR(dev, "phy power off failed: %d", ret);
- 	else
- 		port->phy_enabled = false;
- 
-@@ -446,7 +452,8 @@ static int cdn_dp_disable_phy(struct cdn
- 	if (port->phy_enabled) {
- 		ret = phy_power_off(port->phy);
- 		if (ret) {
--			DRM_DEV_ERROR(dp->dev, "phy power off failed: %d", ret);
-+			DRM_DEV_ERROR(dp->mhdp.dev,
-+				      "phy power off failed: %d", ret);
- 			return ret;
- 		}
- 	}
-@@ -470,16 +477,16 @@ static int cdn_dp_disable(struct cdn_dp_
- 	ret = cdn_dp_grf_write(dp, GRF_SOC_CON26,
- 			       DPTX_HPD_SEL_MASK | DPTX_HPD_DEL);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "Failed to clear hpd sel %d\n",
-+		DRM_DEV_ERROR(dp->mhdp.dev, "Failed to clear hpd sel %d\n",
- 			      ret);
- 		return ret;
- 	}
- 
--	cdn_dp_set_firmware_active(dp, false);
-+	cdns_mhdp_set_firmware_active(&dp->mhdp, false);
- 	cdn_dp_clk_disable(dp);
- 	dp->active = false;
--	dp->link.rate = 0;
--	dp->link.num_lanes = 0;
-+	dp->mhdp.link.rate = 0;
-+	dp->mhdp.link.num_lanes = 0;
- 	if (!dp->connected) {
- 		kfree(dp->edid);
- 		dp->edid = NULL;
-@@ -492,11 +499,11 @@ static int cdn_dp_enable(struct cdn_dp_d
- {
- 	int ret, i, lanes;
- 	struct cdn_dp_port *port;
-+	struct device *dev = dp->mhdp.dev;
- 
- 	port = cdn_dp_connected_port(dp);
- 	if (!port) {
--		DRM_DEV_ERROR(dp->dev,
--			      "Can't enable without connection\n");
-+		DRM_DEV_ERROR(dev, "Can't enable without connection\n");
- 		return -ENODEV;
- 	}
- 
-@@ -509,7 +516,7 @@ static int cdn_dp_enable(struct cdn_dp_d
- 
- 	ret = cdn_dp_firmware_init(dp);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "firmware init failed: %d", ret);
-+		DRM_DEV_ERROR(dp->mhdp.dev, "firmware init failed: %d", ret);
- 		goto err_clk_disable;
- 	}
- 
-@@ -543,8 +550,9 @@ static void cdn_dp_encoder_mode_set(stru
- 				    struct drm_display_mode *adjusted)
- {
- 	struct cdn_dp_device *dp = encoder_to_dp(encoder);
--	struct drm_display_info *display_info = &dp->connector.display_info;
--	struct video_info *video = &dp->video_info;
-+	struct drm_display_info *display_info =
-+		&dp->mhdp.connector.display_info;
-+	struct video_info *video = &dp->mhdp.video_info;
- 
- 	switch (display_info->bpc) {
- 	case 10:
-@@ -562,7 +570,7 @@ static void cdn_dp_encoder_mode_set(stru
- 	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
- 	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
- 
--	memcpy(&dp->mode, adjusted, sizeof(*mode));
-+	memcpy(&dp->mhdp.mode, adjusted, sizeof(*mode));
- }
- 
- static bool cdn_dp_check_link_status(struct cdn_dp_device *dp)
-@@ -571,11 +579,11 @@ static bool cdn_dp_check_link_status(str
- 	struct cdn_dp_port *port = cdn_dp_connected_port(dp);
- 	u8 sink_lanes = drm_dp_max_lane_count(dp->dpcd);
- 
--	if (!port || !dp->link.rate || !dp->link.num_lanes)
-+	if (!port || !dp->mhdp.link.rate || !dp->mhdp.link.num_lanes)
- 		return false;
- 
--	if (cdn_dp_dpcd_read(dp, DP_LANE0_1_STATUS, link_status,
--			     DP_LINK_STATUS_SIZE)) {
-+	if (cdns_mhdp_dpcd_read(&dp->mhdp, DP_LANE0_1_STATUS, link_status,
-+				DP_LINK_STATUS_SIZE)) {
- 		DRM_ERROR("Failed to get link status\n");
- 		return false;
- 	}
-@@ -587,15 +595,16 @@ static bool cdn_dp_check_link_status(str
- static void cdn_dp_encoder_enable(struct drm_encoder *encoder)
- {
- 	struct cdn_dp_device *dp = encoder_to_dp(encoder);
-+	struct device *dev = dp->mhdp.dev;
- 	int ret, val;
- 
--	ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, encoder);
-+	ret = drm_of_encoder_active_endpoint_id(dev->of_node, encoder);
- 	if (ret < 0) {
--		DRM_DEV_ERROR(dp->dev, "Could not get vop id, %d", ret);
-+		DRM_DEV_ERROR(dev, "Could not get vop id, %d", ret);
- 		return;
- 	}
- 
--	DRM_DEV_DEBUG_KMS(dp->dev, "vop %s output to cdn-dp\n",
-+	DRM_DEV_DEBUG_KMS(dev, "vop %s output to cdn-dp\n",
- 			  (ret) ? "LIT" : "BIG");
- 	if (ret)
- 		val = DP_SEL_VOP_LIT | (DP_SEL_VOP_LIT << 16);
-@@ -610,33 +619,33 @@ static void cdn_dp_encoder_enable(struct
- 
- 	ret = cdn_dp_enable(dp);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "Failed to enable encoder %d\n",
-+		DRM_DEV_ERROR(dev, "Failed to enable encoder %d\n",
- 			      ret);
- 		goto out;
- 	}
- 	if (!cdn_dp_check_link_status(dp)) {
--		ret = cdn_dp_train_link(dp);
-+		ret = cdns_mhdp_train_link(&dp->mhdp);
- 		if (ret) {
--			DRM_DEV_ERROR(dp->dev, "Failed link train %d\n", ret);
-+			DRM_DEV_ERROR(dev, "Failed link train %d\n", ret);
- 			goto out;
- 		}
- 	}
- 
--	ret = cdn_dp_set_video_status(dp, CONTROL_VIDEO_IDLE);
-+	ret = cdns_mhdp_set_video_status(&dp->mhdp, CONTROL_VIDEO_IDLE);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "Failed to idle video %d\n", ret);
-+		DRM_DEV_ERROR(dev, "Failed to idle video %d\n", ret);
- 		goto out;
- 	}
- 
--	ret = cdn_dp_config_video(dp);
-+	ret = cdns_mhdp_config_video(&dp->mhdp);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "Failed to config video %d\n", ret);
-+		DRM_DEV_ERROR(dev, "Failed to config video %d\n", ret);
- 		goto out;
- 	}
- 
--	ret = cdn_dp_set_video_status(dp, CONTROL_VIDEO_VALID);
-+	ret = cdns_mhdp_set_video_status(&dp->mhdp, CONTROL_VIDEO_VALID);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "Failed to valid video %d\n", ret);
-+		DRM_DEV_ERROR(dev, "Failed to valid video %d\n", ret);
- 		goto out;
- 	}
- out:
-@@ -652,7 +661,8 @@ static void cdn_dp_encoder_disable(struc
- 	if (dp->active) {
- 		ret = cdn_dp_disable(dp);
- 		if (ret) {
--			DRM_DEV_ERROR(dp->dev, "Failed to disable encoder %d\n",
-+			DRM_DEV_ERROR(dp->mhdp.dev,
-+				      "Failed to disable encoder %d\n",
- 				      ret);
- 		}
- 	}
-@@ -696,7 +706,7 @@ static const struct drm_encoder_funcs cd
- 
- static int cdn_dp_parse_dt(struct cdn_dp_device *dp)
- {
--	struct device *dev = dp->dev;
-+	struct device *dev = dp->mhdp.dev;
- 	struct device_node *np = dev->of_node;
- 	struct platform_device *pdev = to_platform_device(dev);
- 	struct resource *res;
-@@ -708,10 +718,10 @@ static int cdn_dp_parse_dt(struct cdn_dp
- 	}
- 
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	dp->regs = devm_ioremap_resource(dev, res);
--	if (IS_ERR(dp->regs)) {
-+	dp->mhdp.regs = devm_ioremap_resource(dev, res);
-+	if (IS_ERR(dp->mhdp.regs)) {
- 		DRM_DEV_ERROR(dev, "ioremap reg failed\n");
--		return PTR_ERR(dp->regs);
-+		return PTR_ERR(dp->mhdp.regs);
- 	}
- 
- 	dp->core_clk = devm_clk_get(dev, "core-clk");
-@@ -726,10 +736,10 @@ static int cdn_dp_parse_dt(struct cdn_dp
- 		return PTR_ERR(dp->pclk);
- 	}
- 
--	dp->spdif_clk = devm_clk_get(dev, "spdif");
--	if (IS_ERR(dp->spdif_clk)) {
-+	dp->mhdp.spdif_clk = devm_clk_get(dev, "spdif");
-+	if (IS_ERR(dp->mhdp.spdif_clk)) {
- 		DRM_DEV_ERROR(dev, "cannot get spdif_clk\n");
--		return PTR_ERR(dp->spdif_clk);
-+		return PTR_ERR(dp->mhdp.spdif_clk);
- 	}
- 
- 	dp->grf_clk = devm_clk_get(dev, "grf");
-@@ -738,10 +748,10 @@ static int cdn_dp_parse_dt(struct cdn_dp
- 		return PTR_ERR(dp->grf_clk);
- 	}
- 
--	dp->spdif_rst = devm_reset_control_get(dev, "spdif");
--	if (IS_ERR(dp->spdif_rst)) {
-+	dp->mhdp.spdif_rst = devm_reset_control_get(dev, "spdif");
-+	if (IS_ERR(dp->mhdp.spdif_rst)) {
- 		DRM_DEV_ERROR(dev, "no spdif reset control found\n");
--		return PTR_ERR(dp->spdif_rst);
-+		return PTR_ERR(dp->mhdp.spdif_rst);
- 	}
- 
- 	dp->dptx_rst = devm_reset_control_get(dev, "dptx");
-@@ -796,7 +806,7 @@ static int cdn_dp_audio_hw_params(struct
- 		goto out;
- 	}
- 
--	ret = cdn_dp_audio_config(dp, &audio);
-+	ret = cdns_mhdp_audio_config(&dp->mhdp, &audio);
- 	if (!ret)
- 		dp->audio_info = audio;
- 
-@@ -814,7 +824,7 @@ static void cdn_dp_audio_shutdown(struct
- 	if (!dp->active)
- 		goto out;
- 
--	ret = cdn_dp_audio_stop(dp, &dp->audio_info);
-+	ret = cdns_mhdp_audio_stop(&dp->mhdp, &dp->audio_info);
- 	if (!ret)
- 		dp->audio_info.format = AFMT_UNUSED;
- out:
-@@ -833,7 +843,7 @@ static int cdn_dp_audio_digital_mute(str
- 		goto out;
- 	}
- 
--	ret = cdn_dp_audio_mute(dp, enable);
-+	ret = cdns_mhdp_audio_mute(&dp->mhdp, enable);
- 
- out:
- 	mutex_unlock(&dp->lock);
-@@ -845,7 +855,8 @@ static int cdn_dp_audio_get_eld(struct d
- {
- 	struct cdn_dp_device *dp = dev_get_drvdata(dev);
- 
--	memcpy(buf, dp->connector.eld, min(sizeof(dp->connector.eld), len));
-+	memcpy(buf, dp->mhdp.connector.eld,
-+	       min(sizeof(dp->mhdp.connector.eld), len));
- 
- 	return 0;
- }
-@@ -879,6 +890,7 @@ static int cdn_dp_request_firmware(struc
- 	int ret;
- 	unsigned long timeout = jiffies + msecs_to_jiffies(CDN_FW_TIMEOUT_MS);
- 	unsigned long sleep = 1000;
-+	struct device *dev = dp->mhdp.dev;
- 
- 	WARN_ON(!mutex_is_locked(&dp->lock));
- 
-@@ -889,13 +901,13 @@ static int cdn_dp_request_firmware(struc
- 	mutex_unlock(&dp->lock);
- 
- 	while (time_before(jiffies, timeout)) {
--		ret = request_firmware(&dp->fw, CDN_DP_FIRMWARE, dp->dev);
-+		ret = request_firmware(&dp->fw, CDN_DP_FIRMWARE, dev);
- 		if (ret == -ENOENT) {
- 			msleep(sleep);
- 			sleep *= 2;
- 			continue;
- 		} else if (ret) {
--			DRM_DEV_ERROR(dp->dev,
-+			DRM_DEV_ERROR(dev,
- 				      "failed to request firmware: %d\n", ret);
- 			goto out;
- 		}
-@@ -905,7 +917,7 @@ static int cdn_dp_request_firmware(struc
- 		goto out;
- 	}
- 
--	DRM_DEV_ERROR(dp->dev, "Timed out trying to load firmware\n");
-+	DRM_DEV_ERROR(dev, "Timed out trying to load firmware\n");
- 	ret = -ETIMEDOUT;
- out:
- 	mutex_lock(&dp->lock);
-@@ -916,8 +928,9 @@ static void cdn_dp_pd_event_work(struct
- {
- 	struct cdn_dp_device *dp = container_of(work, struct cdn_dp_device,
- 						event_work);
--	struct drm_connector *connector = &dp->connector;
-+	struct drm_connector *connector = &dp->mhdp.connector;
- 	enum drm_connector_status old_status;
-+	struct device *dev = dp->mhdp.dev;
- 
- 	int ret;
- 
-@@ -934,44 +947,45 @@ static void cdn_dp_pd_event_work(struct
- 
- 	/* Not connected, notify userspace to disable the block */
- 	if (!cdn_dp_connected_port(dp)) {
--		DRM_DEV_INFO(dp->dev, "Not connected. Disabling cdn\n");
-+		DRM_DEV_INFO(dev, "Not connected. Disabling cdn\n");
- 		dp->connected = false;
- 
- 	/* Connected but not enabled, enable the block */
- 	} else if (!dp->active) {
--		DRM_DEV_INFO(dp->dev, "Connected, not enabled. Enabling cdn\n");
-+		DRM_DEV_INFO(dev, "Connected, not enabled. Enabling cdn\n");
- 		ret = cdn_dp_enable(dp);
- 		if (ret) {
--			DRM_DEV_ERROR(dp->dev, "Enable dp failed %d\n", ret);
-+			DRM_DEV_ERROR(dev, "Enable dp failed %d\n", ret);
- 			dp->connected = false;
- 		}
- 
- 	/* Enabled and connected to a dongle without a sink, notify userspace */
- 	} else if (!cdn_dp_check_sink_connection(dp)) {
--		DRM_DEV_INFO(dp->dev, "Connected without sink. Assert hpd\n");
-+		DRM_DEV_INFO(dev, "Connected without sink. Assert hpd\n");
- 		dp->connected = false;
- 
- 	/* Enabled and connected with a sink, re-train if requested */
- 	} else if (!cdn_dp_check_link_status(dp)) {
--		unsigned int rate = dp->link.rate;
--		unsigned int lanes = dp->link.num_lanes;
--		struct drm_display_mode *mode = &dp->mode;
-+		unsigned int rate = dp->mhdp.link.rate;
-+		unsigned int lanes = dp->mhdp.link.num_lanes;
-+		struct drm_display_mode *mode = &dp->mhdp.mode;
- 
--		DRM_DEV_INFO(dp->dev, "Connected with sink. Re-train link\n");
--		ret = cdn_dp_train_link(dp);
-+		DRM_DEV_INFO(dev, "Connected with sink. Re-train link\n");
-+		ret = cdns_mhdp_train_link(&dp->mhdp);
- 		if (ret) {
- 			dp->connected = false;
--			DRM_DEV_ERROR(dp->dev, "Train link failed %d\n", ret);
-+			DRM_DEV_ERROR(dev, "Train link failed %d\n", ret);
- 			goto out;
- 		}
- 
- 		/* If training result is changed, update the video config */
- 		if (mode->clock &&
--		    (rate != dp->link.rate || lanes != dp->link.num_lanes)) {
--			ret = cdn_dp_config_video(dp);
-+		    (rate != dp->mhdp.link.rate ||
-+		     lanes != dp->mhdp.link.num_lanes)) {
-+			ret = cdns_mhdp_config_video(&dp->mhdp);
- 			if (ret) {
- 				dp->connected = false;
--				DRM_DEV_ERROR(dp->dev,
-+				DRM_DEV_ERROR(dev,
- 					      "Failed to config video %d\n",
- 					      ret);
- 			}
-@@ -1040,7 +1054,7 @@ static int cdn_dp_bind(struct device *de
- 
- 	drm_encoder_helper_add(encoder, &cdn_dp_encoder_helper_funcs);
- 
--	connector = &dp->connector;
-+	connector = &dp->mhdp.connector;
- 	connector->polled = DRM_CONNECTOR_POLL_HPD;
- 	connector->dpms = DRM_MODE_DPMS_OFF;
- 
-@@ -1064,7 +1078,7 @@ static int cdn_dp_bind(struct device *de
- 		port = dp->port[i];
- 
- 		port->event_nb.notifier_call = cdn_dp_pd_event;
--		ret = devm_extcon_register_notifier(dp->dev, port->extcon,
-+		ret = devm_extcon_register_notifier(dp->mhdp.dev, port->extcon,
- 						    EXTCON_DISP_DP,
- 						    &port->event_nb);
- 		if (ret) {
-@@ -1091,7 +1105,7 @@ static void cdn_dp_unbind(struct device
- {
- 	struct cdn_dp_device *dp = dev_get_drvdata(dev);
- 	struct drm_encoder *encoder = &dp->encoder;
--	struct drm_connector *connector = &dp->connector;
-+	struct drm_connector *connector = &dp->mhdp.connector;
- 
- 	cancel_work_sync(&dp->event_work);
- 	cdn_dp_encoder_disable(encoder);
-@@ -1151,7 +1165,7 @@ static int cdn_dp_probe(struct platform_
- 	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
- 	if (!dp)
- 		return -ENOMEM;
--	dp->dev = dev;
-+	dp->mhdp.dev = dev;
- 
- 	match = of_match_node(cdn_dp_dt_ids, pdev->dev.of_node);
- 	dp_data = (struct cdn_dp_data *)match->data;
-@@ -1196,7 +1210,7 @@ static int cdn_dp_remove(struct platform
- 	struct cdn_dp_device *dp = platform_get_drvdata(pdev);
- 
- 	platform_device_unregister(dp->audio_pdev);
--	cdn_dp_suspend(dp->dev);
-+	cdn_dp_suspend(dp->mhdp.dev);
- 	component_del(&pdev->dev, &cdn_dp_component_ops);
- 
- 	return 0;
-@@ -1206,7 +1220,7 @@ static void cdn_dp_shutdown(struct platf
- {
- 	struct cdn_dp_device *dp = platform_get_drvdata(pdev);
- 
--	cdn_dp_suspend(dp->dev);
-+	cdn_dp_suspend(dp->mhdp.dev);
- }
- 
- static const struct dev_pm_ops cdn_dp_pm_ops = {
---- a/drivers/gpu/drm/rockchip/cdn-dp-core.h
-+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.h
-@@ -12,38 +12,10 @@
- #include <drm/drm_probe_helper.h>
- 
- #include "rockchip_drm_drv.h"
-+#include "cdn-dp-reg.h"
- 
- #define MAX_PHY		2
- 
--enum audio_format {
--	AFMT_I2S = 0,
--	AFMT_SPDIF = 1,
--	AFMT_UNUSED,
--};
--
--struct audio_info {
--	enum audio_format format;
--	int sample_rate;
--	int channels;
--	int sample_width;
--};
--
--enum vic_pxl_encoding_format {
--	PXL_RGB = 0x1,
--	YCBCR_4_4_4 = 0x2,
--	YCBCR_4_2_2 = 0x4,
--	YCBCR_4_2_0 = 0x8,
--	Y_ONLY = 0x10,
--};
--
--struct video_info {
--	bool h_sync_polarity;
--	bool v_sync_polarity;
--	bool interlaced;
--	int color_depth;
--	enum vic_pxl_encoding_format color_fmt;
--};
--
- struct cdn_firmware_header {
- 	u32 size_bytes; /* size of the entire header+image(s) in bytes */
- 	u32 header_size; /* size of just the header in bytes */
-@@ -62,11 +34,9 @@ struct cdn_dp_port {
- };
- 
- struct cdn_dp_device {
--	struct device *dev;
-+	struct cdns_mhdp_device mhdp;
- 	struct drm_device *drm_dev;
--	struct drm_connector connector;
- 	struct drm_encoder encoder;
--	struct drm_display_mode mode;
- 	struct platform_device *audio_pdev;
- 	struct work_struct event_work;
- 	struct edid *edid;
-@@ -77,22 +47,16 @@ struct cdn_dp_device {
- 	bool suspended;
- 
- 	const struct firmware *fw;	/* cdn dp firmware */
--	unsigned int fw_version;	/* cdn fw version */
- 	bool fw_loaded;
- 
--	void __iomem *regs;
- 	struct regmap *grf;
- 	struct clk *core_clk;
- 	struct clk *pclk;
--	struct clk *spdif_clk;
- 	struct clk *grf_clk;
--	struct reset_control *spdif_rst;
- 	struct reset_control *dptx_rst;
- 	struct reset_control *apb_rst;
- 	struct reset_control *core_rst;
- 	struct audio_info audio_info;
--	struct video_info video_info;
--	struct drm_dp_link link;
- 	struct cdn_dp_port *port[MAX_PHY];
- 	u8 ports;
- 	u8 lanes;
---- a/drivers/gpu/drm/rockchip/cdn-dp-reg.c
-+++ b/drivers/gpu/drm/rockchip/cdn-dp-reg.c
-@@ -14,19 +14,19 @@
- #include "cdn-dp-core.h"
- #include "cdn-dp-reg.h"
- 
--#define CDN_DP_SPDIF_CLK		200000000
-+#define CDNS_DP_SPDIF_CLK		200000000
- #define FW_ALIVE_TIMEOUT_US		1000000
- #define MAILBOX_RETRY_US		1000
- #define MAILBOX_TIMEOUT_US		5000000
- #define LINK_TRAINING_RETRY_MS		20
- #define LINK_TRAINING_TIMEOUT_MS	500
- 
--void cdn_dp_set_fw_clk(struct cdn_dp_device *dp, unsigned long clk)
-+void cdns_mhdp_set_fw_clk(struct cdns_mhdp_device *mhdp, unsigned long clk)
- {
--	writel(clk / 1000000, dp->regs + SW_CLK_H);
-+	writel(clk / 1000000, mhdp->regs + SW_CLK_H);
- }
- 
--void cdn_dp_clock_reset(struct cdn_dp_device *dp)
-+void cdns_mhdp_clock_reset(struct cdns_mhdp_device *mhdp)
- {
- 	u32 val;
- 
-@@ -42,16 +42,16 @@ void cdn_dp_clock_reset(struct cdn_dp_de
- 	      DPTX_SYS_CLK_EN |
- 	      CFG_DPTX_VIF_CLK_RSTN_EN |
- 	      CFG_DPTX_VIF_CLK_EN;
--	writel(val, dp->regs + SOURCE_DPTX_CAR);
-+	writel(val, mhdp->regs + SOURCE_DPTX_CAR);
- 
- 	val = SOURCE_PHY_RSTN_EN | SOURCE_PHY_CLK_EN;
--	writel(val, dp->regs + SOURCE_PHY_CAR);
-+	writel(val, mhdp->regs + SOURCE_PHY_CAR);
- 
- 	val = SOURCE_PKT_SYS_RSTN_EN |
- 	      SOURCE_PKT_SYS_CLK_EN |
- 	      SOURCE_PKT_DATA_RSTN_EN |
- 	      SOURCE_PKT_DATA_CLK_EN;
--	writel(val, dp->regs + SOURCE_PKT_CAR);
-+	writel(val, mhdp->regs + SOURCE_PKT_CAR);
- 
- 	val = SPDIF_CDR_CLK_RSTN_EN |
- 	      SPDIF_CDR_CLK_EN |
-@@ -59,53 +59,53 @@ void cdn_dp_clock_reset(struct cdn_dp_de
- 	      SOURCE_AIF_SYS_CLK_EN |
- 	      SOURCE_AIF_CLK_RSTN_EN |
- 	      SOURCE_AIF_CLK_EN;
--	writel(val, dp->regs + SOURCE_AIF_CAR);
-+	writel(val, mhdp->regs + SOURCE_AIF_CAR);
- 
- 	val = SOURCE_CIPHER_SYSTEM_CLK_RSTN_EN |
- 	      SOURCE_CIPHER_SYS_CLK_EN |
- 	      SOURCE_CIPHER_CHAR_CLK_RSTN_EN |
- 	      SOURCE_CIPHER_CHAR_CLK_EN;
--	writel(val, dp->regs + SOURCE_CIPHER_CAR);
-+	writel(val, mhdp->regs + SOURCE_CIPHER_CAR);
- 
- 	val = SOURCE_CRYPTO_SYS_CLK_RSTN_EN |
- 	      SOURCE_CRYPTO_SYS_CLK_EN;
--	writel(val, dp->regs + SOURCE_CRYPTO_CAR);
-+	writel(val, mhdp->regs + SOURCE_CRYPTO_CAR);
- 
- 	/* enable Mailbox and PIF interrupt */
--	writel(0, dp->regs + APB_INT_MASK);
-+	writel(0, mhdp->regs + APB_INT_MASK);
- }
- 
--static int cdn_dp_mailbox_read(struct cdn_dp_device *dp)
-+static int cdns_mhdp_mailbox_read(struct cdns_mhdp_device *mhdp)
- {
- 	int val, ret;
- 
--	ret = readx_poll_timeout(readl, dp->regs + MAILBOX_EMPTY_ADDR,
-+	ret = readx_poll_timeout(readl, mhdp->regs + MAILBOX_EMPTY_ADDR,
- 				 val, !val, MAILBOX_RETRY_US,
- 				 MAILBOX_TIMEOUT_US);
- 	if (ret < 0)
- 		return ret;
- 
--	return readl(dp->regs + MAILBOX0_RD_DATA) & 0xff;
-+	return readl(mhdp->regs + MAILBOX0_RD_DATA) & 0xff;
- }
- 
--static int cdp_dp_mailbox_write(struct cdn_dp_device *dp, u8 val)
-+static int cdp_dp_mailbox_write(struct cdns_mhdp_device *mhdp, u8 val)
- {
- 	int ret, full;
- 
--	ret = readx_poll_timeout(readl, dp->regs + MAILBOX_FULL_ADDR,
-+	ret = readx_poll_timeout(readl, mhdp->regs + MAILBOX_FULL_ADDR,
- 				 full, !full, MAILBOX_RETRY_US,
- 				 MAILBOX_TIMEOUT_US);
- 	if (ret < 0)
- 		return ret;
- 
--	writel(val, dp->regs + MAILBOX0_WR_DATA);
-+	writel(val, mhdp->regs + MAILBOX0_WR_DATA);
- 
- 	return 0;
- }
- 
--static int cdn_dp_mailbox_validate_receive(struct cdn_dp_device *dp,
--					   u8 module_id, u8 opcode,
--					   u16 req_size)
-+static int cdns_mhdp_mailbox_validate_receive(struct cdns_mhdp_device *mhdp,
-+					      u8 module_id, u8 opcode,
-+					      u16 req_size)
- {
- 	u32 mbox_size, i;
- 	u8 header[4];
-@@ -113,7 +113,7 @@ static int cdn_dp_mailbox_validate_recei
- 
- 	/* read the header of the message */
- 	for (i = 0; i < 4; i++) {
--		ret = cdn_dp_mailbox_read(dp);
-+		ret = cdns_mhdp_mailbox_read(mhdp);
- 		if (ret < 0)
- 			return ret;
- 
-@@ -129,7 +129,7 @@ static int cdn_dp_mailbox_validate_recei
- 		 * clear the mailbox by reading its contents.
- 		 */
- 		for (i = 0; i < mbox_size; i++)
--			if (cdn_dp_mailbox_read(dp) < 0)
-+			if (cdns_mhdp_mailbox_read(mhdp) < 0)
- 				break;
- 
- 		return -EINVAL;
-@@ -138,14 +138,14 @@ static int cdn_dp_mailbox_validate_recei
- 	return 0;
- }
- 
--static int cdn_dp_mailbox_read_receive(struct cdn_dp_device *dp,
--				       u8 *buff, u16 buff_size)
-+static int cdns_mhdp_mailbox_read_receive(struct cdns_mhdp_device *mhdp,
-+					  u8 *buff, u16 buff_size)
- {
- 	u32 i;
- 	int ret;
- 
- 	for (i = 0; i < buff_size; i++) {
--		ret = cdn_dp_mailbox_read(dp);
-+		ret = cdns_mhdp_mailbox_read(mhdp);
- 		if (ret < 0)
- 			return ret;
- 
-@@ -155,8 +155,8 @@ static int cdn_dp_mailbox_read_receive(s
- 	return 0;
- }
- 
--static int cdn_dp_mailbox_send(struct cdn_dp_device *dp, u8 module_id,
--			       u8 opcode, u16 size, u8 *message)
-+static int cdns_mhdp_mailbox_send(struct cdns_mhdp_device *mhdp, u8 module_id,
-+				  u8 opcode, u16 size, u8 *message)
- {
- 	u8 header[4];
- 	int ret, i;
-@@ -167,13 +167,13 @@ static int cdn_dp_mailbox_send(struct cd
- 	header[3] = size & 0xff;
- 
- 	for (i = 0; i < 4; i++) {
--		ret = cdp_dp_mailbox_write(dp, header[i]);
-+		ret = cdp_dp_mailbox_write(mhdp, header[i]);
- 		if (ret)
- 			return ret;
- 	}
- 
- 	for (i = 0; i < size; i++) {
--		ret = cdp_dp_mailbox_write(dp, message[i]);
-+		ret = cdp_dp_mailbox_write(mhdp, message[i]);
- 		if (ret)
- 			return ret;
- 	}
-@@ -181,7 +181,7 @@ static int cdn_dp_mailbox_send(struct cd
- 	return 0;
- }
- 
--static int cdn_dp_reg_write(struct cdn_dp_device *dp, u16 addr, u32 val)
-+static int cdns_mhdp_reg_write(struct cdns_mhdp_device *mhdp, u16 addr, u32 val)
- {
- 	u8 msg[6];
- 
-@@ -191,12 +191,12 @@ static int cdn_dp_reg_write(struct cdn_d
- 	msg[3] = (val >> 16) & 0xff;
- 	msg[4] = (val >> 8) & 0xff;
- 	msg[5] = val & 0xff;
--	return cdn_dp_mailbox_send(dp, MB_MODULE_ID_DP_TX, DPTX_WRITE_REGISTER,
--				   sizeof(msg), msg);
-+	return cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				      DPTX_WRITE_REGISTER, sizeof(msg), msg);
- }
- 
--static int cdn_dp_reg_write_bit(struct cdn_dp_device *dp, u16 addr,
--				u8 start_bit, u8 bits_no, u32 val)
-+static int cdns_mhdp_reg_write_bit(struct cdns_mhdp_device *mhdp, u16 addr,
-+				   u8 start_bit, u8 bits_no, u32 val)
- {
- 	u8 field[8];
- 
-@@ -209,11 +209,12 @@ static int cdn_dp_reg_write_bit(struct c
- 	field[6] = (val >> 8) & 0xff;
- 	field[7] = val & 0xff;
- 
--	return cdn_dp_mailbox_send(dp, MB_MODULE_ID_DP_TX, DPTX_WRITE_FIELD,
--				   sizeof(field), field);
-+	return cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				      DPTX_WRITE_FIELD, sizeof(field), field);
- }
- 
--int cdn_dp_dpcd_read(struct cdn_dp_device *dp, u32 addr, u8 *data, u16 len)
-+int cdns_mhdp_dpcd_read(struct cdns_mhdp_device *mhdp,
-+			u32 addr, u8 *data, u16 len)
- {
- 	u8 msg[5], reg[5];
- 	int ret;
-@@ -223,28 +224,28 @@ int cdn_dp_dpcd_read(struct cdn_dp_devic
- 	msg[2] = (addr >> 16) & 0xff;
- 	msg[3] = (addr >> 8) & 0xff;
- 	msg[4] = addr & 0xff;
--	ret = cdn_dp_mailbox_send(dp, MB_MODULE_ID_DP_TX, DPTX_READ_DPCD,
--				  sizeof(msg), msg);
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				     DPTX_READ_DPCD, sizeof(msg), msg);
- 	if (ret)
- 		goto err_dpcd_read;
- 
--	ret = cdn_dp_mailbox_validate_receive(dp, MB_MODULE_ID_DP_TX,
--					      DPTX_READ_DPCD,
--					      sizeof(reg) + len);
-+	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_DP_TX,
-+						 DPTX_READ_DPCD,
-+						 sizeof(reg) + len);
- 	if (ret)
- 		goto err_dpcd_read;
- 
--	ret = cdn_dp_mailbox_read_receive(dp, reg, sizeof(reg));
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, reg, sizeof(reg));
- 	if (ret)
- 		goto err_dpcd_read;
- 
--	ret = cdn_dp_mailbox_read_receive(dp, data, len);
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, data, len);
- 
- err_dpcd_read:
- 	return ret;
- }
- 
--int cdn_dp_dpcd_write(struct cdn_dp_device *dp, u32 addr, u8 value)
-+int cdns_mhdp_dpcd_write(struct cdns_mhdp_device *mhdp, u32 addr, u8 value)
- {
- 	u8 msg[6], reg[5];
- 	int ret;
-@@ -255,17 +256,17 @@ int cdn_dp_dpcd_write(struct cdn_dp_devi
- 	msg[3] = (addr >> 8) & 0xff;
- 	msg[4] = addr & 0xff;
- 	msg[5] = value;
--	ret = cdn_dp_mailbox_send(dp, MB_MODULE_ID_DP_TX, DPTX_WRITE_DPCD,
--				  sizeof(msg), msg);
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				     DPTX_WRITE_DPCD, sizeof(msg), msg);
- 	if (ret)
- 		goto err_dpcd_write;
- 
--	ret = cdn_dp_mailbox_validate_receive(dp, MB_MODULE_ID_DP_TX,
--					      DPTX_WRITE_DPCD, sizeof(reg));
-+	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_DP_TX,
-+						 DPTX_WRITE_DPCD, sizeof(reg));
- 	if (ret)
- 		goto err_dpcd_write;
- 
--	ret = cdn_dp_mailbox_read_receive(dp, reg, sizeof(reg));
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, reg, sizeof(reg));
- 	if (ret)
- 		goto err_dpcd_write;
- 
-@@ -274,53 +275,53 @@ int cdn_dp_dpcd_write(struct cdn_dp_devi
- 
- err_dpcd_write:
- 	if (ret)
--		DRM_DEV_ERROR(dp->dev, "dpcd write failed: %d\n", ret);
-+		DRM_DEV_ERROR(mhdp->dev, "dpcd write failed: %d\n", ret);
- 	return ret;
- }
- 
--int cdn_dp_load_firmware(struct cdn_dp_device *dp, const u32 *i_mem,
--			 u32 i_size, const u32 *d_mem, u32 d_size)
-+int cdns_mhdp_load_firmware(struct cdns_mhdp_device *mhdp, const u32 *i_mem,
-+			    u32 i_size, const u32 *d_mem, u32 d_size)
- {
- 	u32 reg;
- 	int i, ret;
- 
- 	/* reset ucpu before load firmware*/
- 	writel(APB_IRAM_PATH | APB_DRAM_PATH | APB_XT_RESET,
--	       dp->regs + APB_CTRL);
-+	       mhdp->regs + APB_CTRL);
- 
- 	for (i = 0; i < i_size; i += 4)
--		writel(*i_mem++, dp->regs + ADDR_IMEM + i);
-+		writel(*i_mem++, mhdp->regs + ADDR_IMEM + i);
- 
- 	for (i = 0; i < d_size; i += 4)
--		writel(*d_mem++, dp->regs + ADDR_DMEM + i);
-+		writel(*d_mem++, mhdp->regs + ADDR_DMEM + i);
- 
- 	/* un-reset ucpu */
--	writel(0, dp->regs + APB_CTRL);
-+	writel(0, mhdp->regs + APB_CTRL);
- 
- 	/* check the keep alive register to make sure fw working */
--	ret = readx_poll_timeout(readl, dp->regs + KEEP_ALIVE,
-+	ret = readx_poll_timeout(readl, mhdp->regs + KEEP_ALIVE,
- 				 reg, reg, 2000, FW_ALIVE_TIMEOUT_US);
- 	if (ret < 0) {
--		DRM_DEV_ERROR(dp->dev, "failed to loaded the FW reg = %x\n",
-+		DRM_DEV_ERROR(mhdp->dev, "failed to loaded the FW reg = %x\n",
- 			      reg);
- 		return -EINVAL;
- 	}
- 
--	reg = readl(dp->regs + VER_L) & 0xff;
--	dp->fw_version = reg;
--	reg = readl(dp->regs + VER_H) & 0xff;
--	dp->fw_version |= reg << 8;
--	reg = readl(dp->regs + VER_LIB_L_ADDR) & 0xff;
--	dp->fw_version |= reg << 16;
--	reg = readl(dp->regs + VER_LIB_H_ADDR) & 0xff;
--	dp->fw_version |= reg << 24;
-+	reg = readl(mhdp->regs + VER_L) & 0xff;
-+	mhdp->fw_version = reg;
-+	reg = readl(mhdp->regs + VER_H) & 0xff;
-+	mhdp->fw_version |= reg << 8;
-+	reg = readl(mhdp->regs + VER_LIB_L_ADDR) & 0xff;
-+	mhdp->fw_version |= reg << 16;
-+	reg = readl(mhdp->regs + VER_LIB_H_ADDR) & 0xff;
-+	mhdp->fw_version |= reg << 24;
- 
--	DRM_DEV_DEBUG(dp->dev, "firmware version: %x\n", dp->fw_version);
-+	DRM_DEV_DEBUG(mhdp->dev, "firmware version: %x\n", mhdp->fw_version);
- 
- 	return 0;
- }
- 
--int cdn_dp_set_firmware_active(struct cdn_dp_device *dp, bool enable)
-+int cdns_mhdp_set_firmware_active(struct cdns_mhdp_device *mhdp, bool enable)
- {
- 	u8 msg[5];
- 	int ret, i;
-@@ -332,14 +333,14 @@ int cdn_dp_set_firmware_active(struct cd
- 	msg[4] = enable ? FW_ACTIVE : FW_STANDBY;
- 
- 	for (i = 0; i < sizeof(msg); i++) {
--		ret = cdp_dp_mailbox_write(dp, msg[i]);
-+		ret = cdp_dp_mailbox_write(mhdp, msg[i]);
- 		if (ret)
- 			goto err_set_firmware_active;
- 	}
- 
- 	/* read the firmware state */
- 	for (i = 0; i < sizeof(msg); i++)  {
--		ret = cdn_dp_mailbox_read(dp);
-+		ret = cdns_mhdp_mailbox_read(mhdp);
- 		if (ret < 0)
- 			goto err_set_firmware_active;
- 
-@@ -350,16 +351,16 @@ int cdn_dp_set_firmware_active(struct cd
- 
- err_set_firmware_active:
- 	if (ret < 0)
--		DRM_DEV_ERROR(dp->dev, "set firmware active failed\n");
-+		DRM_DEV_ERROR(mhdp->dev, "set firmware active failed\n");
- 	return ret;
- }
- 
--int cdn_dp_set_host_cap(struct cdn_dp_device *dp, u8 lanes, bool flip)
-+int cdns_mhdp_set_host_cap(struct cdns_mhdp_device *mhdp, u8 lanes, bool flip)
- {
- 	u8 msg[8];
- 	int ret;
- 
--	msg[0] = CDN_DP_MAX_LINK_RATE;
-+	msg[0] = CDNS_DP_MAX_LINK_RATE;
- 	msg[1] = lanes | SCRAMBLER_EN;
- 	msg[2] = VOLTAGE_LEVEL_2;
- 	msg[3] = PRE_EMPHASIS_LEVEL_3;
-@@ -368,22 +369,22 @@ int cdn_dp_set_host_cap(struct cdn_dp_de
- 	msg[6] = flip ? LANE_MAPPING_FLIPPED : LANE_MAPPING_NORMAL;
- 	msg[7] = ENHANCED;
- 
--	ret = cdn_dp_mailbox_send(dp, MB_MODULE_ID_DP_TX,
--				  DPTX_SET_HOST_CAPABILITIES,
--				  sizeof(msg), msg);
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				     DPTX_SET_HOST_CAPABILITIES,
-+				     sizeof(msg), msg);
- 	if (ret)
- 		goto err_set_host_cap;
- 
--	ret = cdn_dp_reg_write(dp, DP_AUX_SWAP_INVERSION_CONTROL,
--			       AUX_HOST_INVERT);
-+	ret = cdns_mhdp_reg_write(mhdp, DP_AUX_SWAP_INVERSION_CONTROL,
-+				  AUX_HOST_INVERT);
- 
- err_set_host_cap:
- 	if (ret)
--		DRM_DEV_ERROR(dp->dev, "set host cap failed: %d\n", ret);
-+		DRM_DEV_ERROR(mhdp->dev, "set host cap failed: %d\n", ret);
- 	return ret;
- }
- 
--int cdn_dp_event_config(struct cdn_dp_device *dp)
-+int cdns_mhdp_event_config(struct cdns_mhdp_device *mhdp)
- {
- 	u8 msg[5];
- 	int ret;
-@@ -392,49 +393,50 @@ int cdn_dp_event_config(struct cdn_dp_de
- 
- 	msg[0] = DPTX_EVENT_ENABLE_HPD | DPTX_EVENT_ENABLE_TRAINING;
- 
--	ret = cdn_dp_mailbox_send(dp, MB_MODULE_ID_DP_TX, DPTX_ENABLE_EVENT,
--				  sizeof(msg), msg);
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				     DPTX_ENABLE_EVENT, sizeof(msg), msg);
- 	if (ret)
--		DRM_DEV_ERROR(dp->dev, "set event config failed: %d\n", ret);
-+		DRM_DEV_ERROR(mhdp->dev, "set event config failed: %d\n", ret);
- 
- 	return ret;
- }
- 
--u32 cdn_dp_get_event(struct cdn_dp_device *dp)
-+u32 cdns_mhdp_get_event(struct cdns_mhdp_device *mhdp)
- {
--	return readl(dp->regs + SW_EVENTS0);
-+	return readl(mhdp->regs + SW_EVENTS0);
- }
- 
--int cdn_dp_get_hpd_status(struct cdn_dp_device *dp)
-+int cdns_mhdp_get_hpd_status(struct cdns_mhdp_device *mhdp)
- {
- 	u8 status;
- 	int ret;
- 
--	ret = cdn_dp_mailbox_send(dp, MB_MODULE_ID_DP_TX, DPTX_HPD_STATE,
--				  0, NULL);
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				     DPTX_HPD_STATE, 0, NULL);
- 	if (ret)
- 		goto err_get_hpd;
- 
--	ret = cdn_dp_mailbox_validate_receive(dp, MB_MODULE_ID_DP_TX,
--					      DPTX_HPD_STATE, sizeof(status));
-+	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_DP_TX,
-+						 DPTX_HPD_STATE,
-+						 sizeof(status));
- 	if (ret)
- 		goto err_get_hpd;
- 
--	ret = cdn_dp_mailbox_read_receive(dp, &status, sizeof(status));
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, &status, sizeof(status));
- 	if (ret)
- 		goto err_get_hpd;
- 
- 	return status;
- 
- err_get_hpd:
--	DRM_DEV_ERROR(dp->dev, "get hpd status failed: %d\n", ret);
-+	DRM_DEV_ERROR(mhdp->dev, "get hpd status failed: %d\n", ret);
- 	return ret;
- }
- 
--int cdn_dp_get_edid_block(void *data, u8 *edid,
-+int cdns_mhdp_get_edid_block(void *data, u8 *edid,
- 			  unsigned int block, size_t length)
- {
--	struct cdn_dp_device *dp = data;
-+	struct cdns_mhdp_device *mhdp = data;
- 	u8 msg[2], reg[2], i;
- 	int ret;
- 
-@@ -442,22 +444,23 @@ int cdn_dp_get_edid_block(void *data, u8
- 		msg[0] = block / 2;
- 		msg[1] = block % 2;
- 
--		ret = cdn_dp_mailbox_send(dp, MB_MODULE_ID_DP_TX, DPTX_GET_EDID,
--					  sizeof(msg), msg);
-+		ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+					     DPTX_GET_EDID, sizeof(msg), msg);
- 		if (ret)
- 			continue;
- 
--		ret = cdn_dp_mailbox_validate_receive(dp, MB_MODULE_ID_DP_TX,
--						      DPTX_GET_EDID,
--						      sizeof(reg) + length);
-+		ret = cdns_mhdp_mailbox_validate_receive(mhdp,
-+							 MB_MODULE_ID_DP_TX,
-+							 DPTX_GET_EDID,
-+							 sizeof(reg) + length);
- 		if (ret)
- 			continue;
- 
--		ret = cdn_dp_mailbox_read_receive(dp, reg, sizeof(reg));
-+		ret = cdns_mhdp_mailbox_read_receive(mhdp, reg, sizeof(reg));
- 		if (ret)
- 			continue;
- 
--		ret = cdn_dp_mailbox_read_receive(dp, edid, length);
-+		ret = cdns_mhdp_mailbox_read_receive(mhdp, edid, length);
- 		if (ret)
- 			continue;
- 
-@@ -466,13 +469,13 @@ int cdn_dp_get_edid_block(void *data, u8
- 	}
- 
- 	if (ret)
--		DRM_DEV_ERROR(dp->dev, "get block[%d] edid failed: %d\n", block,
--			      ret);
-+		DRM_DEV_ERROR(mhdp->dev, "get block[%d] edid failed: %d\n",
-+			      block, ret);
- 
- 	return ret;
- }
- 
--static int cdn_dp_training_start(struct cdn_dp_device *dp)
-+static int cdns_mhdp_training_start(struct cdns_mhdp_device *mhdp)
- {
- 	unsigned long timeout;
- 	u8 msg, event[2];
-@@ -481,26 +484,28 @@ static int cdn_dp_training_start(struct
- 	msg = LINK_TRAINING_RUN;
- 
- 	/* start training */
--	ret = cdn_dp_mailbox_send(dp, MB_MODULE_ID_DP_TX, DPTX_TRAINING_CONTROL,
--				  sizeof(msg), &msg);
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				     DPTX_TRAINING_CONTROL, sizeof(msg), &msg);
- 	if (ret)
- 		goto err_training_start;
- 
- 	timeout = jiffies + msecs_to_jiffies(LINK_TRAINING_TIMEOUT_MS);
- 	while (time_before(jiffies, timeout)) {
- 		msleep(LINK_TRAINING_RETRY_MS);
--		ret = cdn_dp_mailbox_send(dp, MB_MODULE_ID_DP_TX,
--					  DPTX_READ_EVENT, 0, NULL);
-+		ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+					     DPTX_READ_EVENT, 0, NULL);
- 		if (ret)
- 			goto err_training_start;
- 
--		ret = cdn_dp_mailbox_validate_receive(dp, MB_MODULE_ID_DP_TX,
--						      DPTX_READ_EVENT,
--						      sizeof(event));
-+		ret = cdns_mhdp_mailbox_validate_receive(mhdp,
-+							 MB_MODULE_ID_DP_TX,
-+							 DPTX_READ_EVENT,
-+							 sizeof(event));
- 		if (ret)
- 			goto err_training_start;
- 
--		ret = cdn_dp_mailbox_read_receive(dp, event, sizeof(event));
-+		ret = cdns_mhdp_mailbox_read_receive(mhdp, event,
-+						     sizeof(event));
- 		if (ret)
- 			goto err_training_start;
- 
-@@ -511,76 +516,76 @@ static int cdn_dp_training_start(struct
- 	ret = -ETIMEDOUT;
- 
- err_training_start:
--	DRM_DEV_ERROR(dp->dev, "training failed: %d\n", ret);
-+	DRM_DEV_ERROR(mhdp->dev, "training failed: %d\n", ret);
- 	return ret;
- }
- 
--static int cdn_dp_get_training_status(struct cdn_dp_device *dp)
-+static int cdns_mhdp_get_training_status(struct cdns_mhdp_device *mhdp)
- {
- 	u8 status[10];
- 	int ret;
- 
--	ret = cdn_dp_mailbox_send(dp, MB_MODULE_ID_DP_TX, DPTX_READ_LINK_STAT,
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX, DPTX_READ_LINK_STAT,
- 				  0, NULL);
- 	if (ret)
- 		goto err_get_training_status;
- 
--	ret = cdn_dp_mailbox_validate_receive(dp, MB_MODULE_ID_DP_TX,
-+	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_DP_TX,
- 					      DPTX_READ_LINK_STAT,
- 					      sizeof(status));
- 	if (ret)
- 		goto err_get_training_status;
- 
--	ret = cdn_dp_mailbox_read_receive(dp, status, sizeof(status));
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, status, sizeof(status));
- 	if (ret)
- 		goto err_get_training_status;
- 
--	dp->link.rate = drm_dp_bw_code_to_link_rate(status[0]);
--	dp->link.num_lanes = status[1];
-+	mhdp->link.rate = drm_dp_bw_code_to_link_rate(status[0]);
-+	mhdp->link.num_lanes = status[1];
- 
- err_get_training_status:
- 	if (ret)
--		DRM_DEV_ERROR(dp->dev, "get training status failed: %d\n", ret);
-+		DRM_DEV_ERROR(mhdp->dev, "get training status failed: %d\n", ret);
- 	return ret;
- }
- 
--int cdn_dp_train_link(struct cdn_dp_device *dp)
-+int cdns_mhdp_train_link(struct cdns_mhdp_device *mhdp)
- {
- 	int ret;
- 
--	ret = cdn_dp_training_start(dp);
-+	ret = cdns_mhdp_training_start(mhdp);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "Failed to start training %d\n", ret);
-+		DRM_DEV_ERROR(mhdp->dev, "Failed to start training %d\n", ret);
- 		return ret;
- 	}
- 
--	ret = cdn_dp_get_training_status(dp);
-+	ret = cdns_mhdp_get_training_status(mhdp);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "Failed to get training stat %d\n", ret);
-+		DRM_DEV_ERROR(mhdp->dev, "Failed to get training stat %d\n", ret);
- 		return ret;
- 	}
- 
--	DRM_DEV_DEBUG_KMS(dp->dev, "rate:0x%x, lanes:%d\n", dp->link.rate,
--			  dp->link.num_lanes);
-+	DRM_DEV_DEBUG_KMS(mhdp->dev, "rate:0x%x, lanes:%d\n", mhdp->link.rate,
-+			  mhdp->link.num_lanes);
- 	return ret;
- }
- 
--int cdn_dp_set_video_status(struct cdn_dp_device *dp, int active)
-+int cdns_mhdp_set_video_status(struct cdns_mhdp_device *mhdp, int active)
- {
- 	u8 msg;
- 	int ret;
- 
- 	msg = !!active;
- 
--	ret = cdn_dp_mailbox_send(dp, MB_MODULE_ID_DP_TX, DPTX_SET_VIDEO,
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX, DPTX_SET_VIDEO,
- 				  sizeof(msg), &msg);
- 	if (ret)
--		DRM_DEV_ERROR(dp->dev, "set video status failed: %d\n", ret);
-+		DRM_DEV_ERROR(mhdp->dev, "set video status failed: %d\n", ret);
- 
- 	return ret;
- }
- 
--static int cdn_dp_get_msa_misc(struct video_info *video,
-+static int cdns_mhdp_get_msa_misc(struct video_info *video,
- 			       struct drm_display_mode *mode)
- {
- 	u32 msa_misc;
-@@ -627,10 +632,10 @@ static int cdn_dp_get_msa_misc(struct vi
- 	return msa_misc;
- }
- 
--int cdn_dp_config_video(struct cdn_dp_device *dp)
-+int cdns_mhdp_config_video(struct cdns_mhdp_device *mhdp)
- {
--	struct video_info *video = &dp->video_info;
--	struct drm_display_mode *mode = &dp->mode;
-+	struct video_info *video = &mhdp->video_info;
-+	struct drm_display_mode *mode = &mhdp->mode;
- 	u64 symbol;
- 	u32 val, link_rate, rem;
- 	u8 bit_per_pix, tu_size_reg = TU_SIZE;
-@@ -639,13 +644,13 @@ int cdn_dp_config_video(struct cdn_dp_de
- 	bit_per_pix = (video->color_fmt == YCBCR_4_2_2) ?
- 		      (video->color_depth * 2) : (video->color_depth * 3);
- 
--	link_rate = dp->link.rate / 1000;
-+	link_rate = mhdp->link.rate / 1000;
- 
--	ret = cdn_dp_reg_write(dp, BND_HSYNC2VSYNC, VIF_BYPASS_INTERLACE);
-+	ret = cdns_mhdp_reg_write(mhdp, BND_HSYNC2VSYNC, VIF_BYPASS_INTERLACE);
- 	if (ret)
- 		goto err_config_video;
- 
--	ret = cdn_dp_reg_write(dp, HSYNC2VSYNC_POL_CTRL, 0);
-+	ret = cdns_mhdp_reg_write(mhdp, HSYNC2VSYNC_POL_CTRL, 0);
- 	if (ret)
- 		goto err_config_video;
- 
-@@ -659,13 +664,13 @@ int cdn_dp_config_video(struct cdn_dp_de
- 	do {
- 		tu_size_reg += 2;
- 		symbol = tu_size_reg * mode->clock * bit_per_pix;
--		do_div(symbol, dp->link.num_lanes * link_rate * 8);
-+		do_div(symbol, mhdp->link.num_lanes * link_rate * 8);
- 		rem = do_div(symbol, 1000);
- 		if (tu_size_reg > 64) {
- 			ret = -EINVAL;
--			DRM_DEV_ERROR(dp->dev,
-+			DRM_DEV_ERROR(mhdp->dev,
- 				      "tu error, clk:%d, lanes:%d, rate:%d\n",
--				      mode->clock, dp->link.num_lanes,
-+				      mode->clock, mhdp->link.num_lanes,
- 				      link_rate);
- 			goto err_config_video;
- 		}
-@@ -674,16 +679,16 @@ int cdn_dp_config_video(struct cdn_dp_de
- 
- 	val = symbol + (tu_size_reg << 8);
- 	val |= TU_CNT_RST_EN;
--	ret = cdn_dp_reg_write(dp, DP_FRAMER_TU, val);
-+	ret = cdns_mhdp_reg_write(mhdp, DP_FRAMER_TU, val);
- 	if (ret)
- 		goto err_config_video;
- 
- 	/* set the FIFO Buffer size */
- 	val = div_u64(mode->clock * (symbol + 1), 1000) + link_rate;
--	val /= (dp->link.num_lanes * link_rate);
-+	val /= (mhdp->link.num_lanes * link_rate);
- 	val = div_u64(8 * (symbol + 1), bit_per_pix) - val;
- 	val += 2;
--	ret = cdn_dp_reg_write(dp, DP_VC_TABLE(15), val);
-+	ret = cdns_mhdp_reg_write(mhdp, DP_VC_TABLE(15), val);
- 
- 	switch (video->color_depth) {
- 	case 6:
-@@ -704,136 +709,137 @@ int cdn_dp_config_video(struct cdn_dp_de
- 	};
- 
- 	val += video->color_fmt << 8;
--	ret = cdn_dp_reg_write(dp, DP_FRAMER_PXL_REPR, val);
-+	ret = cdns_mhdp_reg_write(mhdp, DP_FRAMER_PXL_REPR, val);
- 	if (ret)
- 		goto err_config_video;
- 
- 	val = video->h_sync_polarity ? DP_FRAMER_SP_HSP : 0;
- 	val |= video->v_sync_polarity ? DP_FRAMER_SP_VSP : 0;
--	ret = cdn_dp_reg_write(dp, DP_FRAMER_SP, val);
-+	ret = cdns_mhdp_reg_write(mhdp, DP_FRAMER_SP, val);
- 	if (ret)
- 		goto err_config_video;
- 
- 	val = (mode->hsync_start - mode->hdisplay) << 16;
- 	val |= mode->htotal - mode->hsync_end;
--	ret = cdn_dp_reg_write(dp, DP_FRONT_BACK_PORCH, val);
-+	ret = cdns_mhdp_reg_write(mhdp, DP_FRONT_BACK_PORCH, val);
- 	if (ret)
- 		goto err_config_video;
- 
- 	val = mode->hdisplay * bit_per_pix / 8;
--	ret = cdn_dp_reg_write(dp, DP_BYTE_COUNT, val);
-+	ret = cdns_mhdp_reg_write(mhdp, DP_BYTE_COUNT, val);
- 	if (ret)
- 		goto err_config_video;
- 
- 	val = mode->htotal | ((mode->htotal - mode->hsync_start) << 16);
--	ret = cdn_dp_reg_write(dp, MSA_HORIZONTAL_0, val);
-+	ret = cdns_mhdp_reg_write(mhdp, MSA_HORIZONTAL_0, val);
- 	if (ret)
- 		goto err_config_video;
- 
- 	val = mode->hsync_end - mode->hsync_start;
- 	val |= (mode->hdisplay << 16) | (video->h_sync_polarity << 15);
--	ret = cdn_dp_reg_write(dp, MSA_HORIZONTAL_1, val);
-+	ret = cdns_mhdp_reg_write(mhdp, MSA_HORIZONTAL_1, val);
- 	if (ret)
- 		goto err_config_video;
- 
- 	val = mode->vtotal;
- 	val |= (mode->vtotal - mode->vsync_start) << 16;
--	ret = cdn_dp_reg_write(dp, MSA_VERTICAL_0, val);
-+	ret = cdns_mhdp_reg_write(mhdp, MSA_VERTICAL_0, val);
- 	if (ret)
- 		goto err_config_video;
- 
- 	val = mode->vsync_end - mode->vsync_start;
- 	val |= (mode->vdisplay << 16) | (video->v_sync_polarity << 15);
--	ret = cdn_dp_reg_write(dp, MSA_VERTICAL_1, val);
-+	ret = cdns_mhdp_reg_write(mhdp, MSA_VERTICAL_1, val);
- 	if (ret)
- 		goto err_config_video;
- 
--	val = cdn_dp_get_msa_misc(video, mode);
--	ret = cdn_dp_reg_write(dp, MSA_MISC, val);
-+	val = cdns_mhdp_get_msa_misc(video, mode);
-+	ret = cdns_mhdp_reg_write(mhdp, MSA_MISC, val);
- 	if (ret)
- 		goto err_config_video;
- 
--	ret = cdn_dp_reg_write(dp, STREAM_CONFIG, 1);
-+	ret = cdns_mhdp_reg_write(mhdp, STREAM_CONFIG, 1);
- 	if (ret)
- 		goto err_config_video;
- 
- 	val = mode->hsync_end - mode->hsync_start;
- 	val |= mode->hdisplay << 16;
--	ret = cdn_dp_reg_write(dp, DP_HORIZONTAL, val);
-+	ret = cdns_mhdp_reg_write(mhdp, DP_HORIZONTAL, val);
- 	if (ret)
- 		goto err_config_video;
- 
- 	val = mode->vdisplay;
- 	val |= (mode->vtotal - mode->vsync_start) << 16;
--	ret = cdn_dp_reg_write(dp, DP_VERTICAL_0, val);
-+	ret = cdns_mhdp_reg_write(mhdp, DP_VERTICAL_0, val);
- 	if (ret)
- 		goto err_config_video;
- 
- 	val = mode->vtotal;
--	ret = cdn_dp_reg_write(dp, DP_VERTICAL_1, val);
-+	ret = cdns_mhdp_reg_write(mhdp, DP_VERTICAL_1, val);
- 	if (ret)
- 		goto err_config_video;
- 
--	ret = cdn_dp_reg_write_bit(dp, DP_VB_ID, 2, 1, 0);
-+	ret = cdns_mhdp_reg_write_bit(mhdp, DP_VB_ID, 2, 1, 0);
- 
- err_config_video:
- 	if (ret)
--		DRM_DEV_ERROR(dp->dev, "config video failed: %d\n", ret);
-+		DRM_DEV_ERROR(mhdp->dev, "config video failed: %d\n", ret);
- 	return ret;
- }
- 
--int cdn_dp_audio_stop(struct cdn_dp_device *dp, struct audio_info *audio)
-+int cdns_mhdp_audio_stop(struct cdns_mhdp_device *mhdp,
-+			 struct audio_info *audio)
- {
- 	int ret;
- 
--	ret = cdn_dp_reg_write(dp, AUDIO_PACK_CONTROL, 0);
-+	ret = cdns_mhdp_reg_write(mhdp, AUDIO_PACK_CONTROL, 0);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->dev, "audio stop failed: %d\n", ret);
-+		DRM_DEV_ERROR(mhdp->dev, "audio stop failed: %d\n", ret);
- 		return ret;
- 	}
- 
--	writel(0, dp->regs + SPDIF_CTRL_ADDR);
-+	writel(0, mhdp->regs + SPDIF_CTRL_ADDR);
- 
- 	/* clearn the audio config and reset */
--	writel(0, dp->regs + AUDIO_SRC_CNTL);
--	writel(0, dp->regs + AUDIO_SRC_CNFG);
--	writel(AUDIO_SW_RST, dp->regs + AUDIO_SRC_CNTL);
--	writel(0, dp->regs + AUDIO_SRC_CNTL);
-+	writel(0, mhdp->regs + AUDIO_SRC_CNTL);
-+	writel(0, mhdp->regs + AUDIO_SRC_CNFG);
-+	writel(AUDIO_SW_RST, mhdp->regs + AUDIO_SRC_CNTL);
-+	writel(0, mhdp->regs + AUDIO_SRC_CNTL);
- 
- 	/* reset smpl2pckt component  */
--	writel(0, dp->regs + SMPL2PKT_CNTL);
--	writel(AUDIO_SW_RST, dp->regs + SMPL2PKT_CNTL);
--	writel(0, dp->regs + SMPL2PKT_CNTL);
-+	writel(0, mhdp->regs + SMPL2PKT_CNTL);
-+	writel(AUDIO_SW_RST, mhdp->regs + SMPL2PKT_CNTL);
-+	writel(0, mhdp->regs + SMPL2PKT_CNTL);
- 
- 	/* reset FIFO */
--	writel(AUDIO_SW_RST, dp->regs + FIFO_CNTL);
--	writel(0, dp->regs + FIFO_CNTL);
-+	writel(AUDIO_SW_RST, mhdp->regs + FIFO_CNTL);
-+	writel(0, mhdp->regs + FIFO_CNTL);
- 
- 	if (audio->format == AFMT_SPDIF)
--		clk_disable_unprepare(dp->spdif_clk);
-+		clk_disable_unprepare(mhdp->spdif_clk);
- 
- 	return 0;
- }
- 
--int cdn_dp_audio_mute(struct cdn_dp_device *dp, bool enable)
-+int cdns_mhdp_audio_mute(struct cdns_mhdp_device *mhdp, bool enable)
- {
- 	int ret;
- 
--	ret = cdn_dp_reg_write_bit(dp, DP_VB_ID, 4, 1, enable);
-+	ret = cdns_mhdp_reg_write_bit(mhdp, DP_VB_ID, 4, 1, enable);
- 	if (ret)
--		DRM_DEV_ERROR(dp->dev, "audio mute failed: %d\n", ret);
-+		DRM_DEV_ERROR(mhdp->dev, "audio mute failed: %d\n", ret);
- 
- 	return ret;
- }
- 
--static void cdn_dp_audio_config_i2s(struct cdn_dp_device *dp,
--				    struct audio_info *audio)
-+static void cdns_mhdp_audio_config_i2s(struct cdns_mhdp_device *mhdp,
-+				       struct audio_info *audio)
- {
- 	int sub_pckt_num = 1, i2s_port_en_val = 0xf, i;
- 	u32 val;
- 
- 	if (audio->channels == 2) {
--		if (dp->link.num_lanes == 1)
-+		if (mhdp->link.num_lanes == 1)
- 			sub_pckt_num = 2;
- 		else
- 			sub_pckt_num = 4;
-@@ -843,15 +849,15 @@ static void cdn_dp_audio_config_i2s(stru
- 		i2s_port_en_val = 3;
- 	}
- 
--	writel(0x0, dp->regs + SPDIF_CTRL_ADDR);
-+	writel(0x0, mhdp->regs + SPDIF_CTRL_ADDR);
- 
--	writel(SYNC_WR_TO_CH_ZERO, dp->regs + FIFO_CNTL);
-+	writel(SYNC_WR_TO_CH_ZERO, mhdp->regs + FIFO_CNTL);
- 
- 	val = MAX_NUM_CH(audio->channels);
- 	val |= NUM_OF_I2S_PORTS(audio->channels);
- 	val |= AUDIO_TYPE_LPCM;
- 	val |= CFG_SUB_PCKT_NUM(sub_pckt_num);
--	writel(val, dp->regs + SMPL2PKT_CNFG);
-+	writel(val, mhdp->regs + SMPL2PKT_CNFG);
- 
- 	if (audio->sample_width == 16)
- 		val = 0;
-@@ -863,7 +869,7 @@ static void cdn_dp_audio_config_i2s(stru
- 	val |= AUDIO_CH_NUM(audio->channels);
- 	val |= I2S_DEC_PORT_EN(i2s_port_en_val);
- 	val |= TRANS_SMPL_WIDTH_32;
--	writel(val, dp->regs + AUDIO_SRC_CNFG);
-+	writel(val, mhdp->regs + AUDIO_SRC_CNFG);
- 
- 	for (i = 0; i < (audio->channels + 1) / 2; i++) {
- 		if (audio->sample_width == 16)
-@@ -872,7 +878,7 @@ static void cdn_dp_audio_config_i2s(stru
- 			val = (0x0b << 8) | (0x0b << 20);
- 
- 		val |= ((2 * i) << 4) | ((2 * i + 1) << 16);
--		writel(val, dp->regs + STTS_BIT_CH(i));
-+		writel(val, mhdp->regs + STTS_BIT_CH(i));
- 	}
- 
- 	switch (audio->sample_rate) {
-@@ -906,56 +912,57 @@ static void cdn_dp_audio_config_i2s(stru
- 		break;
- 	}
- 	val |= 4;
--	writel(val, dp->regs + COM_CH_STTS_BITS);
-+	writel(val, mhdp->regs + COM_CH_STTS_BITS);
- 
--	writel(SMPL2PKT_EN, dp->regs + SMPL2PKT_CNTL);
--	writel(I2S_DEC_START, dp->regs + AUDIO_SRC_CNTL);
-+	writel(SMPL2PKT_EN, mhdp->regs + SMPL2PKT_CNTL);
-+	writel(I2S_DEC_START, mhdp->regs + AUDIO_SRC_CNTL);
- }
- 
--static void cdn_dp_audio_config_spdif(struct cdn_dp_device *dp)
-+static void cdns_mhdp_audio_config_spdif(struct cdns_mhdp_device *mhdp)
- {
- 	u32 val;
- 
--	writel(SYNC_WR_TO_CH_ZERO, dp->regs + FIFO_CNTL);
-+	writel(SYNC_WR_TO_CH_ZERO, mhdp->regs + FIFO_CNTL);
- 
- 	val = MAX_NUM_CH(2) | AUDIO_TYPE_LPCM | CFG_SUB_PCKT_NUM(4);
--	writel(val, dp->regs + SMPL2PKT_CNFG);
--	writel(SMPL2PKT_EN, dp->regs + SMPL2PKT_CNTL);
-+	writel(val, mhdp->regs + SMPL2PKT_CNFG);
-+	writel(SMPL2PKT_EN, mhdp->regs + SMPL2PKT_CNTL);
- 
- 	val = SPDIF_ENABLE | SPDIF_AVG_SEL | SPDIF_JITTER_BYPASS;
--	writel(val, dp->regs + SPDIF_CTRL_ADDR);
-+	writel(val, mhdp->regs + SPDIF_CTRL_ADDR);
- 
--	clk_prepare_enable(dp->spdif_clk);
--	clk_set_rate(dp->spdif_clk, CDN_DP_SPDIF_CLK);
-+	clk_prepare_enable(mhdp->spdif_clk);
-+	clk_set_rate(mhdp->spdif_clk, CDNS_DP_SPDIF_CLK);
- }
- 
--int cdn_dp_audio_config(struct cdn_dp_device *dp, struct audio_info *audio)
-+int cdns_mhdp_audio_config(struct cdns_mhdp_device *mhdp,
-+			   struct audio_info *audio)
- {
- 	int ret;
- 
- 	/* reset the spdif clk before config */
- 	if (audio->format == AFMT_SPDIF) {
--		reset_control_assert(dp->spdif_rst);
--		reset_control_deassert(dp->spdif_rst);
-+		reset_control_assert(mhdp->spdif_rst);
-+		reset_control_deassert(mhdp->spdif_rst);
- 	}
- 
--	ret = cdn_dp_reg_write(dp, CM_LANE_CTRL, LANE_REF_CYC);
-+	ret = cdns_mhdp_reg_write(mhdp, CM_LANE_CTRL, LANE_REF_CYC);
- 	if (ret)
- 		goto err_audio_config;
- 
--	ret = cdn_dp_reg_write(dp, CM_CTRL, 0);
-+	ret = cdns_mhdp_reg_write(mhdp, CM_CTRL, 0);
- 	if (ret)
- 		goto err_audio_config;
- 
- 	if (audio->format == AFMT_I2S)
--		cdn_dp_audio_config_i2s(dp, audio);
-+		cdns_mhdp_audio_config_i2s(mhdp, audio);
- 	else if (audio->format == AFMT_SPDIF)
--		cdn_dp_audio_config_spdif(dp);
-+		cdns_mhdp_audio_config_spdif(mhdp);
- 
--	ret = cdn_dp_reg_write(dp, AUDIO_PACK_CONTROL, AUDIO_PACK_EN);
-+	ret = cdns_mhdp_reg_write(mhdp, AUDIO_PACK_CONTROL, AUDIO_PACK_EN);
- 
- err_audio_config:
- 	if (ret)
--		DRM_DEV_ERROR(dp->dev, "audio config failed: %d\n", ret);
-+		DRM_DEV_ERROR(mhdp->dev, "audio config failed: %d\n", ret);
- 	return ret;
- }
---- a/drivers/gpu/drm/rockchip/cdn-dp-reg.h
-+++ b/drivers/gpu/drm/rockchip/cdn-dp-reg.h
-@@ -387,7 +387,7 @@
- #define HDCP_TX_IS_RECEIVER_ID_VALID_EVENT	BIT(7)
- 
- #define TU_SIZE					30
--#define CDN_DP_MAX_LINK_RATE			DP_LINK_BW_5_4
-+#define CDNS_DP_MAX_LINK_RATE			DP_LINK_BW_5_4
- 
- /* audio */
- #define AUDIO_PACK_EN				BIT(8)
-@@ -451,24 +451,96 @@ enum vic_bt_type {
- 	BT_709 = 0x1,
- };
- 
--void cdn_dp_clock_reset(struct cdn_dp_device *dp);
-+enum audio_format {
-+	AFMT_I2S = 0,
-+	AFMT_SPDIF = 1,
-+	AFMT_UNUSED,
-+};
-+
-+struct audio_info {
-+	enum audio_format format;
-+	int sample_rate;
-+	int channels;
-+	int sample_width;
-+};
-+
-+enum vic_pxl_encoding_format {
-+	PXL_RGB = 0x1,
-+	YCBCR_4_4_4 = 0x2,
-+	YCBCR_4_2_2 = 0x4,
-+	YCBCR_4_2_0 = 0x8,
-+	Y_ONLY = 0x10,
-+};
-+
-+struct video_info {
-+	bool h_sync_polarity;
-+	bool v_sync_polarity;
-+	bool interlaced;
-+	int color_depth;
-+	enum vic_pxl_encoding_format color_fmt;
-+};
-+
-+struct cdns_mhdp_host {
-+	unsigned int	link_rate;
-+	u8	lanes_cnt;
-+	u8	volt_swing;
-+	u8	pre_emphasis;
-+	u8	pattern_supp;
-+	u8	fast_link;
-+	u8	lane_mapping;
-+	u8	enhanced;
-+};
-+
-+struct cdns_mhdp_sink {
-+	unsigned int	link_rate;
-+	u8	lanes_cnt;
-+	u8	pattern_supp;
-+	u8	fast_link;
-+	u8	enhanced;
-+};
-+
-+struct cdns_mhdp_device {
-+	void __iomem		*regs;
-+
-+	struct device		*dev;
-+
-+	struct drm_dp_link	link;
-+	struct drm_connector	connector;
-+	struct clk		*spdif_clk;
-+	struct reset_control	*spdif_rst;
-+
-+	struct drm_dp_aux	aux;
-+	struct cdns_mhdp_host	host;
-+	struct cdns_mhdp_sink	sink;
-+	struct drm_bridge	bridge;
-+	struct phy		*phy;
-+	void __iomem		*dbg_regs;
-+
-+	struct video_info	video_info;
-+	struct drm_display_mode	mode;
-+	unsigned int		fw_version;
-+};
- 
--void cdn_dp_set_fw_clk(struct cdn_dp_device *dp, unsigned long clk);
--int cdn_dp_load_firmware(struct cdn_dp_device *dp, const u32 *i_mem,
--			 u32 i_size, const u32 *d_mem, u32 d_size);
--int cdn_dp_set_firmware_active(struct cdn_dp_device *dp, bool enable);
--int cdn_dp_set_host_cap(struct cdn_dp_device *dp, u8 lanes, bool flip);
--int cdn_dp_event_config(struct cdn_dp_device *dp);
--u32 cdn_dp_get_event(struct cdn_dp_device *dp);
--int cdn_dp_get_hpd_status(struct cdn_dp_device *dp);
--int cdn_dp_dpcd_write(struct cdn_dp_device *dp, u32 addr, u8 value);
--int cdn_dp_dpcd_read(struct cdn_dp_device *dp, u32 addr, u8 *data, u16 len);
--int cdn_dp_get_edid_block(void *dp, u8 *edid,
--			  unsigned int block, size_t length);
--int cdn_dp_train_link(struct cdn_dp_device *dp);
--int cdn_dp_set_video_status(struct cdn_dp_device *dp, int active);
--int cdn_dp_config_video(struct cdn_dp_device *dp);
--int cdn_dp_audio_stop(struct cdn_dp_device *dp, struct audio_info *audio);
--int cdn_dp_audio_mute(struct cdn_dp_device *dp, bool enable);
--int cdn_dp_audio_config(struct cdn_dp_device *dp, struct audio_info *audio);
-+void cdns_mhdp_clock_reset(struct cdns_mhdp_device *mhdp);
-+void cdns_mhdp_set_fw_clk(struct cdns_mhdp_device *mhdp, unsigned long clk);
-+int cdns_mhdp_load_firmware(struct cdns_mhdp_device *mhdp, const u32 *i_mem,
-+			    u32 i_size, const u32 *d_mem, u32 d_size);
-+int cdns_mhdp_set_firmware_active(struct cdns_mhdp_device *mhdp, bool enable);
-+int cdns_mhdp_set_host_cap(struct cdns_mhdp_device *mhdp, u8 lanes, bool flip);
-+int cdns_mhdp_event_config(struct cdns_mhdp_device *mhdp);
-+u32 cdns_mhdp_get_event(struct cdns_mhdp_device *mhdp);
-+int cdns_mhdp_get_hpd_status(struct cdns_mhdp_device *mhdp);
-+int cdns_mhdp_dpcd_write(struct cdns_mhdp_device *mhdp, u32 addr, u8 value);
-+int cdns_mhdp_dpcd_read(struct cdns_mhdp_device *mhdp,
-+			u32 addr, u8 *data, u16 len);
-+int cdns_mhdp_get_edid_block(void *mhdp, u8 *edid,
-+			     unsigned int block, size_t length);
-+int cdns_mhdp_train_link(struct cdns_mhdp_device *mhdp);
-+int cdns_mhdp_set_video_status(struct cdns_mhdp_device *mhdp, int active);
-+int cdns_mhdp_config_video(struct cdns_mhdp_device *mhdp);
-+int cdns_mhdp_audio_stop(struct cdns_mhdp_device *mhdp,
-+			 struct audio_info *audio);
-+int cdns_mhdp_audio_mute(struct cdns_mhdp_device *mhdp, bool enable);
-+int cdns_mhdp_audio_config(struct cdns_mhdp_device *mhdp,
-+			   struct audio_info *audio);
- #endif /* _CDN_DP_REG_H */
diff --git a/target/linux/layerscape/patches-5.4/805-display-0003-drm-bridge-add-Cadence-MHDP-HDMI-DP-API.patch b/target/linux/layerscape/patches-5.4/805-display-0003-drm-bridge-add-Cadence-MHDP-HDMI-DP-API.patch
deleted file mode 100644
index 14089a7b36..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0003-drm-bridge-add-Cadence-MHDP-HDMI-DP-API.patch
+++ /dev/null
@@ -1,4241 +0,0 @@
-From d94a1a8c31cab273b3409c9c380a8089a794f592 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Wed, 10 Jul 2019 14:22:12 +0800
-Subject: [PATCH] drm: bridge: add Cadence MHDP HDMI/DP API
-
-Changes made in the low level driver (cdn-dp-reg.*):
-- moved it to from drivers/gpu/drm/rockchip to
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c and
- include/drm/bridge/cdns-mhdp-common.h
-- functions for sending/receiving commands are now public
-- added functions for reading registers and link training adjustment
-
-Changes made in RK's driver (cdn-dp-core.*):
-- Moved audio_info and audio_pdev fields from cdn_dp_device to
-  cdns_mhdp_device structure.
-
-Signed-off-by: Quentin Schulz<quentin.schulz@free-electrons.com>
-Signed-off-by: Piotr Sroka <piotrs@cadence.com>
-Signed-off-by: Damian Kos <dkos@cadence.com>
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/Kconfig                    |    2 +
- drivers/gpu/drm/bridge/Makefile                   |    1 +
- drivers/gpu/drm/bridge/cadence/Kconfig            |    7 +
- drivers/gpu/drm/bridge/cadence/Makefile           |    3 +
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c | 1165 +++++++++++++++++++++
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-hdmi.c   |  296 ++++++
- drivers/gpu/drm/bridge/cadence/cdns-mhdp.h        |  209 ++++
- drivers/gpu/drm/rockchip/Kconfig                  |    4 +-
- drivers/gpu/drm/rockchip/Makefile                 |    2 +-
- drivers/gpu/drm/rockchip/cdn-dp-core.c            |   48 +-
- drivers/gpu/drm/rockchip/cdn-dp-core.h            |    5 +-
- drivers/gpu/drm/rockchip/cdn-dp-reg.c             |  968 -----------------
- drivers/gpu/drm/rockchip/cdn-dp-reg.h             |  546 ----------
- include/drm/bridge/cdns-mhdp-cbs.h                |   29 +
- include/drm/bridge/cdns-mhdp-common.h             |  704 +++++++++++++
- 15 files changed, 2446 insertions(+), 1543 deletions(-)
- create mode 100644 drivers/gpu/drm/bridge/cadence/Kconfig
- create mode 100644 drivers/gpu/drm/bridge/cadence/Makefile
- create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
- create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp-hdmi.c
- create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp.h
- delete mode 100644 drivers/gpu/drm/rockchip/cdn-dp-reg.c
- delete mode 100644 drivers/gpu/drm/rockchip/cdn-dp-reg.h
- create mode 100644 include/drm/bridge/cdns-mhdp-cbs.h
- create mode 100644 include/drm/bridge/cdns-mhdp-common.h
-
---- a/drivers/gpu/drm/bridge/Kconfig
-+++ b/drivers/gpu/drm/bridge/Kconfig
-@@ -154,6 +154,8 @@ source "drivers/gpu/drm/bridge/analogix/
- 
- source "drivers/gpu/drm/bridge/adv7511/Kconfig"
- 
-+source "drivers/gpu/drm/bridge/cadence/Kconfig"
-+
- source "drivers/gpu/drm/bridge/synopsys/Kconfig"
- 
- endmenu
---- a/drivers/gpu/drm/bridge/Makefile
-+++ b/drivers/gpu/drm/bridge/Makefile
-@@ -16,4 +16,5 @@ obj-$(CONFIG_DRM_ANALOGIX_DP) += analogi
- obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
- obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o
- obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o
-+obj-y += cadence/
- obj-y += synopsys/
---- /dev/null
-+++ b/drivers/gpu/drm/bridge/cadence/Kconfig
-@@ -0,0 +1,7 @@
-+config DRM_CDNS_MHDP
-+	tristate "Cadence MHDP COMMON API driver"
-+	select DRM_KMS_HELPER
-+	select DRM_PANEL_BRIDGE
-+	depends on OF
-+	help
-+	  Support Cadence MHDP API library.
---- /dev/null
-+++ b/drivers/gpu/drm/bridge/cadence/Makefile
-@@ -0,0 +1,3 @@
-+#ccflags-y := -Iinclude/drm
-+
-+obj-$(CONFIG_DRM_CDNS_MHDP) += cdns-mhdp-common.o cdns-mhdp-hdmi.o
---- /dev/null
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
-@@ -0,0 +1,1165 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
-+ * Author: Chris Zhong <zyw@rock-chips.com>
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/iopoll.h>
-+#include <linux/reset.h>
-+
-+#include <asm/unaligned.h>
-+
-+#include <drm/bridge/cdns-mhdp-common.h>
-+#include <drm/drm_modes.h>
-+#include <drm/drm_print.h>
-+
-+#define CDNS_DP_SPDIF_CLK		200000000
-+#define FW_ALIVE_TIMEOUT_US		1000000
-+#define MAILBOX_RETRY_US		1000
-+#define MAILBOX_TIMEOUT_US		5000000
-+#define LINK_TRAINING_RETRY_MS		20
-+#define LINK_TRAINING_TIMEOUT_MS	500
-+
-+static inline u32 get_unaligned_be24(const void *p)
-+{
-+	const u8 *_p = p;
-+
-+	return _p[0] << 16 | _p[1] << 8 | _p[2];
-+}
-+
-+static inline void put_unaligned_be24(u32 val, void *p)
-+{
-+	u8 *_p = p;
-+
-+	_p[0] = val >> 16;
-+	_p[1] = val >> 8;
-+	_p[2] = val;
-+}
-+
-+void cdns_mhdp_set_fw_clk(struct cdns_mhdp_device *mhdp, unsigned long clk)
-+{
-+	writel(clk / 1000000, mhdp->regs + SW_CLK_H);
-+}
-+EXPORT_SYMBOL(cdns_mhdp_set_fw_clk);
-+
-+void cdns_mhdp_clock_reset(struct cdns_mhdp_device *mhdp)
-+{
-+	u32 val;
-+
-+	val = DPTX_FRMR_DATA_CLK_RSTN_EN |
-+	      DPTX_FRMR_DATA_CLK_EN |
-+	      DPTX_PHY_DATA_RSTN_EN |
-+	      DPTX_PHY_DATA_CLK_EN |
-+	      DPTX_PHY_CHAR_RSTN_EN |
-+	      DPTX_PHY_CHAR_CLK_EN |
-+	      SOURCE_AUX_SYS_CLK_RSTN_EN |
-+	      SOURCE_AUX_SYS_CLK_EN |
-+	      DPTX_SYS_CLK_RSTN_EN |
-+	      DPTX_SYS_CLK_EN |
-+	      CFG_DPTX_VIF_CLK_RSTN_EN |
-+	      CFG_DPTX_VIF_CLK_EN;
-+	writel(val, mhdp->regs + SOURCE_DPTX_CAR);
-+
-+	val = SOURCE_PHY_RSTN_EN | SOURCE_PHY_CLK_EN;
-+	writel(val, mhdp->regs + SOURCE_PHY_CAR);
-+
-+	val = SOURCE_PKT_SYS_RSTN_EN |
-+	      SOURCE_PKT_SYS_CLK_EN |
-+	      SOURCE_PKT_DATA_RSTN_EN |
-+	      SOURCE_PKT_DATA_CLK_EN;
-+	writel(val, mhdp->regs + SOURCE_PKT_CAR);
-+
-+	val = SPDIF_CDR_CLK_RSTN_EN |
-+	      SPDIF_CDR_CLK_EN |
-+	      SOURCE_AIF_SYS_RSTN_EN |
-+	      SOURCE_AIF_SYS_CLK_EN |
-+	      SOURCE_AIF_CLK_RSTN_EN |
-+	      SOURCE_AIF_CLK_EN;
-+	writel(val, mhdp->regs + SOURCE_AIF_CAR);
-+
-+	val = SOURCE_CIPHER_SYSTEM_CLK_RSTN_EN |
-+	      SOURCE_CIPHER_SYS_CLK_EN |
-+	      SOURCE_CIPHER_CHAR_CLK_RSTN_EN |
-+	      SOURCE_CIPHER_CHAR_CLK_EN;
-+	writel(val, mhdp->regs + SOURCE_CIPHER_CAR);
-+
-+	val = SOURCE_CRYPTO_SYS_CLK_RSTN_EN |
-+	      SOURCE_CRYPTO_SYS_CLK_EN;
-+	writel(val, mhdp->regs + SOURCE_CRYPTO_CAR);
-+
-+	/* enable Mailbox and PIF interrupt */
-+	writel(0, mhdp->regs + APB_INT_MASK);
-+}
-+EXPORT_SYMBOL(cdns_mhdp_clock_reset);
-+
-+int cdns_mhdp_mailbox_read(struct cdns_mhdp_device *mhdp)
-+{
-+	int val, ret;
-+
-+	ret = readx_poll_timeout(readl, mhdp->regs + MAILBOX_EMPTY_ADDR,
-+				 val, !val, MAILBOX_RETRY_US,
-+				 MAILBOX_TIMEOUT_US);
-+	if (ret < 0)
-+		return ret;
-+
-+	return readl(mhdp->regs + MAILBOX0_RD_DATA) & 0xff;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_mailbox_read);
-+
-+static int cdp_dp_mailbox_write(struct cdns_mhdp_device *mhdp, u8 val)
-+{
-+	int ret, full;
-+
-+	ret = readx_poll_timeout(readl, mhdp->regs + MAILBOX_FULL_ADDR,
-+				 full, !full, MAILBOX_RETRY_US,
-+				 MAILBOX_TIMEOUT_US);
-+	if (ret < 0)
-+		return ret;
-+
-+	writel(val, mhdp->regs + MAILBOX0_WR_DATA);
-+
-+	return 0;
-+}
-+
-+int cdns_mhdp_mailbox_validate_receive(struct cdns_mhdp_device *mhdp,
-+					      u8 module_id, u8 opcode,
-+					      u16 req_size)
-+{
-+	u32 mbox_size, i;
-+	u8 header[4];
-+	int ret;
-+
-+	/* read the header of the message */
-+	for (i = 0; i < 4; i++) {
-+		ret = cdns_mhdp_mailbox_read(mhdp);
-+		if (ret < 0)
-+			return ret;
-+
-+		header[i] = ret;
-+	}
-+
-+	mbox_size = get_unaligned_be16(header + 2);
-+
-+	if (opcode != header[0] || module_id != header[1] ||
-+	    req_size != mbox_size) {
-+		/*
-+		 * If the message in mailbox is not what we want, we need to
-+		 * clear the mailbox by reading its contents.
-+		 */
-+		for (i = 0; i < mbox_size; i++)
-+			if (cdns_mhdp_mailbox_read(mhdp) < 0)
-+				break;
-+
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_mailbox_validate_receive);
-+
-+int cdns_mhdp_mailbox_read_receive(struct cdns_mhdp_device *mhdp,
-+					  u8 *buff, u16 buff_size)
-+{
-+	u32 i;
-+	int ret;
-+
-+	for (i = 0; i < buff_size; i++) {
-+		ret = cdns_mhdp_mailbox_read(mhdp);
-+		if (ret < 0)
-+			return ret;
-+
-+		buff[i] = ret;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_mailbox_read_receive);
-+
-+int cdns_mhdp_mailbox_send(struct cdns_mhdp_device *mhdp, u8 module_id,
-+				  u8 opcode, u16 size, u8 *message)
-+{
-+	u8 header[4];
-+	int ret, i;
-+
-+	header[0] = opcode;
-+	header[1] = module_id;
-+	put_unaligned_be16(size, header + 2);
-+
-+	for (i = 0; i < 4; i++) {
-+		ret = cdp_dp_mailbox_write(mhdp, header[i]);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	for (i = 0; i < size; i++) {
-+		ret = cdp_dp_mailbox_write(mhdp, message[i]);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_mailbox_send);
-+
-+int cdns_mhdp_reg_read(struct cdns_mhdp_device *mhdp, u32 addr)
-+{
-+	u8 msg[4], resp[8];
-+	u32 val;
-+	int ret;
-+
-+	if (addr == 0) {
-+		ret = -EINVAL;
-+		goto err_reg_read;
-+	}
-+
-+	put_unaligned_be32(addr, msg);
-+
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_GENERAL,
-+				     GENERAL_READ_REGISTER,
-+				     sizeof(msg), msg);
-+	if (ret)
-+		goto err_reg_read;
-+
-+	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_GENERAL,
-+						 GENERAL_READ_REGISTER,
-+						 sizeof(resp));
-+	if (ret)
-+		goto err_reg_read;
-+
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, resp, sizeof(resp));
-+	if (ret)
-+		goto err_reg_read;
-+
-+	/* Returned address value should be the same as requested */
-+	if (memcmp(msg, resp, sizeof(msg))) {
-+		ret = -EINVAL;
-+		goto err_reg_read;
-+	}
-+
-+	val = get_unaligned_be32(resp + 4);
-+
-+	return val;
-+err_reg_read:
-+	DRM_DEV_ERROR(mhdp->dev, "Failed to read register.\n");
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_reg_read);
-+
-+int cdns_mhdp_reg_write(struct cdns_mhdp_device *mhdp, u32 addr, u32 val)
-+{
-+	u8 msg[8];
-+
-+	put_unaligned_be32(addr, msg);
-+	put_unaligned_be32(val, msg + 4);
-+
-+	return cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_GENERAL,
-+				      GENERAL_WRITE_REGISTER, sizeof(msg), msg);
-+}
-+EXPORT_SYMBOL(cdns_mhdp_reg_write);
-+
-+int cdns_mhdp_reg_write_bit(struct cdns_mhdp_device *mhdp, u16 addr,
-+				   u8 start_bit, u8 bits_no, u32 val)
-+{
-+	u8 field[8];
-+
-+	put_unaligned_be16(addr, field);
-+	field[2] = start_bit;
-+	field[3] = bits_no;
-+	put_unaligned_be32(val, field + 4);
-+
-+	return cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				      DPTX_WRITE_FIELD, sizeof(field), field);
-+}
-+EXPORT_SYMBOL(cdns_mhdp_reg_write_bit);
-+
-+int cdns_mhdp_dpcd_read(struct cdns_mhdp_device *mhdp,
-+			u32 addr, u8 *data, u16 len)
-+{
-+	u8 msg[5], reg[5];
-+	int ret;
-+
-+	put_unaligned_be16(len, msg);
-+	put_unaligned_be24(addr, msg + 2);
-+
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				     DPTX_READ_DPCD, sizeof(msg), msg);
-+	if (ret)
-+		goto err_dpcd_read;
-+
-+	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_DP_TX,
-+						 DPTX_READ_DPCD,
-+						 sizeof(reg) + len);
-+	if (ret)
-+		goto err_dpcd_read;
-+
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, reg, sizeof(reg));
-+	if (ret)
-+		goto err_dpcd_read;
-+
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, data, len);
-+
-+err_dpcd_read:
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_dpcd_read);
-+
-+int cdns_mhdp_dpcd_write(struct cdns_mhdp_device *mhdp, u32 addr, u8 value)
-+{
-+	u8 msg[6], reg[5];
-+	int ret;
-+
-+	put_unaligned_be16(1, msg);
-+	put_unaligned_be24(addr, msg + 2);
-+	msg[5] = value;
-+
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				     DPTX_WRITE_DPCD, sizeof(msg), msg);
-+	if (ret)
-+		goto err_dpcd_write;
-+
-+	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_DP_TX,
-+						 DPTX_WRITE_DPCD, sizeof(reg));
-+	if (ret)
-+		goto err_dpcd_write;
-+
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, reg, sizeof(reg));
-+	if (ret)
-+		goto err_dpcd_write;
-+
-+	if (addr != get_unaligned_be24(reg + 2))
-+		ret = -EINVAL;
-+
-+err_dpcd_write:
-+	if (ret)
-+		DRM_DEV_ERROR(mhdp->dev, "dpcd write failed: %d\n", ret);
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_dpcd_write);
-+
-+int cdns_mhdp_load_firmware(struct cdns_mhdp_device *mhdp, const u32 *i_mem,
-+			    u32 i_size, const u32 *d_mem, u32 d_size)
-+{
-+	u32 reg;
-+	int i, ret;
-+
-+	/* reset ucpu before load firmware*/
-+	writel(APB_IRAM_PATH | APB_DRAM_PATH | APB_XT_RESET,
-+	       mhdp->regs + APB_CTRL);
-+
-+	for (i = 0; i < i_size; i += 4)
-+		writel(*i_mem++, mhdp->regs + ADDR_IMEM + i);
-+
-+	for (i = 0; i < d_size; i += 4)
-+		writel(*d_mem++, mhdp->regs + ADDR_DMEM + i);
-+
-+	/* un-reset ucpu */
-+	writel(0, mhdp->regs + APB_CTRL);
-+
-+	/* check the keep alive register to make sure fw working */
-+	ret = readx_poll_timeout(readl, mhdp->regs + KEEP_ALIVE,
-+				 reg, reg, 2000, FW_ALIVE_TIMEOUT_US);
-+	if (ret < 0) {
-+		DRM_DEV_ERROR(mhdp->dev, "failed to loaded the FW reg = %x\n",
-+			      reg);
-+		return -EINVAL;
-+	}
-+
-+	reg = readl(mhdp->regs + VER_L) & 0xff;
-+	mhdp->fw_version = reg;
-+	reg = readl(mhdp->regs + VER_H) & 0xff;
-+	mhdp->fw_version |= reg << 8;
-+	reg = readl(mhdp->regs + VER_LIB_L_ADDR) & 0xff;
-+	mhdp->fw_version |= reg << 16;
-+	reg = readl(mhdp->regs + VER_LIB_H_ADDR) & 0xff;
-+	mhdp->fw_version |= reg << 24;
-+
-+	DRM_DEV_DEBUG(mhdp->dev, "firmware version: %x\n", mhdp->fw_version);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_load_firmware);
-+
-+int cdns_mhdp_set_firmware_active(struct cdns_mhdp_device *mhdp, bool enable)
-+{
-+	u8 msg[5];
-+	int ret, i;
-+
-+	msg[0] = GENERAL_MAIN_CONTROL;
-+	msg[1] = MB_MODULE_ID_GENERAL;
-+	msg[2] = 0;
-+	msg[3] = 1;
-+	msg[4] = enable ? FW_ACTIVE : FW_STANDBY;
-+
-+	for (i = 0; i < sizeof(msg); i++) {
-+		ret = cdp_dp_mailbox_write(mhdp, msg[i]);
-+		if (ret)
-+			goto err_set_firmware_active;
-+	}
-+
-+	/* read the firmware state */
-+	for (i = 0; i < sizeof(msg); i++)  {
-+		ret = cdns_mhdp_mailbox_read(mhdp);
-+		if (ret < 0)
-+			goto err_set_firmware_active;
-+
-+		msg[i] = ret;
-+	}
-+
-+	ret = 0;
-+
-+err_set_firmware_active:
-+	if (ret < 0)
-+		DRM_DEV_ERROR(mhdp->dev, "set firmware active failed\n");
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_set_firmware_active);
-+
-+int cdns_mhdp_set_host_cap(struct cdns_mhdp_device *mhdp, u8 lanes, bool flip)
-+{
-+	u8 msg[8];
-+	int ret;
-+
-+	msg[0] = CDNS_DP_MAX_LINK_RATE;
-+	msg[1] = lanes | SCRAMBLER_EN;
-+	msg[2] = VOLTAGE_LEVEL_2;
-+	msg[3] = PRE_EMPHASIS_LEVEL_3;
-+	msg[4] = PTS1 | PTS2 | PTS3 | PTS4;
-+	msg[5] = FAST_LT_NOT_SUPPORT;
-+	msg[6] = flip ? LANE_MAPPING_FLIPPED : LANE_MAPPING_NORMAL;
-+	msg[7] = ENHANCED;
-+
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				     DPTX_SET_HOST_CAPABILITIES,
-+				     sizeof(msg), msg);
-+	if (ret)
-+		goto err_set_host_cap;
-+
-+/* TODO Sandor */
-+//	ret = cdns_mhdp_reg_write(mhdp, DP_AUX_SWAP_INVERSION_CONTROL,
-+//				  AUX_HOST_INVERT);
-+
-+err_set_host_cap:
-+	if (ret)
-+		DRM_DEV_ERROR(mhdp->dev, "set host cap failed: %d\n", ret);
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_set_host_cap);
-+
-+int cdns_mhdp_event_config(struct cdns_mhdp_device *mhdp)
-+{
-+	u8 msg[5];
-+	int ret;
-+
-+	memset(msg, 0, sizeof(msg));
-+
-+	msg[0] = DPTX_EVENT_ENABLE_HPD | DPTX_EVENT_ENABLE_TRAINING;
-+
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				     DPTX_ENABLE_EVENT, sizeof(msg), msg);
-+	if (ret)
-+		DRM_DEV_ERROR(mhdp->dev, "set event config failed: %d\n", ret);
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_event_config);
-+
-+u32 cdns_mhdp_get_event(struct cdns_mhdp_device *mhdp)
-+{
-+	return readl(mhdp->regs + SW_EVENTS0);
-+}
-+EXPORT_SYMBOL(cdns_mhdp_get_event);
-+
-+int cdns_mhdp_get_hpd_status(struct cdns_mhdp_device *mhdp)
-+{
-+	u8 status;
-+	int ret;
-+
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				     DPTX_HPD_STATE, 0, NULL);
-+	if (ret)
-+		goto err_get_hpd;
-+
-+	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_DP_TX,
-+						 DPTX_HPD_STATE,
-+						 sizeof(status));
-+	if (ret)
-+		goto err_get_hpd;
-+
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, &status, sizeof(status));
-+	if (ret)
-+		goto err_get_hpd;
-+
-+	return status;
-+
-+err_get_hpd:
-+	DRM_DEV_ERROR(mhdp->dev, "get hpd status failed: %d\n", ret);
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_get_hpd_status);
-+
-+int cdns_mhdp_get_edid_block(void *data, u8 *edid,
-+			  unsigned int block, size_t length)
-+{
-+	struct cdns_mhdp_device *mhdp = data;
-+	u8 msg[2], reg[2], i;
-+	int ret;
-+
-+	for (i = 0; i < 4; i++) {
-+		msg[0] = block / 2;
-+		msg[1] = block % 2;
-+
-+		ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+					     DPTX_GET_EDID, sizeof(msg), msg);
-+		if (ret)
-+			continue;
-+
-+		ret = cdns_mhdp_mailbox_validate_receive(mhdp,
-+							 MB_MODULE_ID_DP_TX,
-+							 DPTX_GET_EDID,
-+							 sizeof(reg) + length);
-+		if (ret)
-+			continue;
-+
-+		ret = cdns_mhdp_mailbox_read_receive(mhdp, reg, sizeof(reg));
-+		if (ret)
-+			continue;
-+
-+		ret = cdns_mhdp_mailbox_read_receive(mhdp, edid, length);
-+		if (ret)
-+			continue;
-+
-+		if (reg[0] == length && reg[1] == block / 2)
-+			break;
-+	}
-+
-+	if (ret)
-+		DRM_DEV_ERROR(mhdp->dev, "get block[%d] edid failed: %d\n",
-+			      block, ret);
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_get_edid_block);
-+
-+static int cdns_mhdp_training_start(struct cdns_mhdp_device *mhdp)
-+{
-+	unsigned long timeout;
-+	u8 msg, event[2];
-+	int ret;
-+
-+	msg = LINK_TRAINING_RUN;
-+
-+	/* start training */
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				     DPTX_TRAINING_CONTROL, sizeof(msg), &msg);
-+	if (ret)
-+		goto err_training_start;
-+
-+	timeout = jiffies + msecs_to_jiffies(LINK_TRAINING_TIMEOUT_MS);
-+	while (time_before(jiffies, timeout)) {
-+		msleep(LINK_TRAINING_RETRY_MS);
-+		ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+					     DPTX_READ_EVENT, 0, NULL);
-+		if (ret)
-+			goto err_training_start;
-+
-+		ret = cdns_mhdp_mailbox_validate_receive(mhdp,
-+							 MB_MODULE_ID_DP_TX,
-+							 DPTX_READ_EVENT,
-+							 sizeof(event));
-+		if (ret)
-+			goto err_training_start;
-+
-+		ret = cdns_mhdp_mailbox_read_receive(mhdp, event,
-+						     sizeof(event));
-+		if (ret)
-+			goto err_training_start;
-+
-+		if (event[1] & EQ_PHASE_FINISHED)
-+			return 0;
-+	}
-+
-+	ret = -ETIMEDOUT;
-+
-+err_training_start:
-+	DRM_DEV_ERROR(mhdp->dev, "training failed: %d\n", ret);
-+	return ret;
-+}
-+
-+static int cdns_mhdp_get_training_status(struct cdns_mhdp_device *mhdp)
-+{
-+	u8 status[10];
-+	int ret;
-+
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				     DPTX_READ_LINK_STAT, 0, NULL);
-+	if (ret)
-+		goto err_get_training_status;
-+
-+	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_DP_TX,
-+						 DPTX_READ_LINK_STAT,
-+						 sizeof(status));
-+	if (ret)
-+		goto err_get_training_status;
-+
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, status, sizeof(status));
-+	if (ret)
-+		goto err_get_training_status;
-+
-+	mhdp->dp.link.rate = drm_dp_bw_code_to_link_rate(status[0]); 
-+	mhdp->dp.link.num_lanes = status[1];
-+
-+err_get_training_status:
-+	if (ret)
-+		DRM_DEV_ERROR(mhdp->dev, "get training status failed: %d\n",
-+			      ret);
-+	return ret;
-+}
-+
-+int cdns_mhdp_train_link(struct cdns_mhdp_device *mhdp)
-+{
-+	int ret;
-+
-+	ret = cdns_mhdp_training_start(mhdp);
-+	if (ret) {
-+		DRM_DEV_ERROR(mhdp->dev, "Failed to start training %d\n",
-+			      ret);
-+		return ret;
-+	}
-+
-+	ret = cdns_mhdp_get_training_status(mhdp);
-+	if (ret) {
-+		DRM_DEV_ERROR(mhdp->dev, "Failed to get training stat %d\n",
-+			      ret);
-+		return ret;
-+	}
-+
-+	DRM_DEV_DEBUG_KMS(mhdp->dev, "rate:0x%x, lanes:%d\n", mhdp->dp.link.rate,
-+			  mhdp->dp.link.num_lanes);
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_train_link);
-+
-+int cdns_mhdp_set_video_status(struct cdns_mhdp_device *mhdp, int active)
-+{
-+	u8 msg;
-+	int ret;
-+
-+	msg = !!active;
-+
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				     DPTX_SET_VIDEO, sizeof(msg), &msg);
-+	if (ret)
-+		DRM_DEV_ERROR(mhdp->dev, "set video status failed: %d\n", ret);
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_set_video_status);
-+
-+static int cdns_mhdp_get_msa_misc(struct video_info *video,
-+				  struct drm_display_mode *mode)
-+{
-+	u32 msa_misc;
-+	u8 val[2] = {0};
-+
-+	switch (video->color_fmt) {
-+	case PXL_RGB:
-+	case Y_ONLY:
-+		val[0] = 0;
-+		break;
-+	/* set YUV default color space conversion to BT601 */
-+	case YCBCR_4_4_4:
-+		val[0] = 6 + BT_601 * 8;
-+		break;
-+	case YCBCR_4_2_2:
-+		val[0] = 5 + BT_601 * 8;
-+		break;
-+	case YCBCR_4_2_0:
-+		val[0] = 5;
-+		break;
-+	};
-+
-+	switch (video->color_depth) {
-+	case 6:
-+		val[1] = 0;
-+		break;
-+	case 8:
-+		val[1] = 1;
-+		break;
-+	case 10:
-+		val[1] = 2;
-+		break;
-+	case 12:
-+		val[1] = 3;
-+		break;
-+	case 16:
-+		val[1] = 4;
-+		break;
-+	};
-+
-+	msa_misc = 2 * val[0] + 32 * val[1] +
-+		   ((video->color_fmt == Y_ONLY) ? (1 << 14) : 0);
-+
-+	return msa_misc;
-+}
-+
-+int cdns_mhdp_config_video(struct cdns_mhdp_device *mhdp)
-+{
-+	struct video_info *video = &mhdp->video_info;
-+	struct drm_display_mode *mode = &mhdp->mode;
-+	u64 symbol;
-+	u32 val, link_rate, rem;
-+	u8 bit_per_pix, tu_size_reg = TU_SIZE;
-+	int ret;
-+
-+	bit_per_pix = (video->color_fmt == YCBCR_4_2_2) ?
-+		      (video->color_depth * 2) : (video->color_depth * 3);
-+
-+	link_rate = mhdp->dp.link.rate / 1000;
-+
-+	ret = cdns_mhdp_reg_write(mhdp, BND_HSYNC2VSYNC, VIF_BYPASS_INTERLACE);
-+	if (ret)
-+		goto err_config_video;
-+
-+	ret = cdns_mhdp_reg_write(mhdp, HSYNC2VSYNC_POL_CTRL, 0);
-+	if (ret)
-+		goto err_config_video;
-+
-+	/*
-+	 * get a best tu_size and valid symbol:
-+	 * 1. chose Lclk freq(162Mhz, 270Mhz, 540Mhz), set TU to 32
-+	 * 2. calculate VS(valid symbol) = TU * Pclk * Bpp / (Lclk * Lanes)
-+	 * 3. if VS > *.85 or VS < *.1 or VS < 2 or TU < VS + 4, then set
-+	 *    TU += 2 and repeat 2nd step.
-+	 */
-+	do {
-+		tu_size_reg += 2;
-+		symbol = tu_size_reg * mode->clock * bit_per_pix;
-+		do_div(symbol, mhdp->dp.link.num_lanes * link_rate * 8);
-+		rem = do_div(symbol, 1000);
-+		if (tu_size_reg > 64) {
-+			ret = -EINVAL;
-+			DRM_DEV_ERROR(mhdp->dev,
-+				      "tu error, clk:%d, lanes:%d, rate:%d\n",
-+				      mode->clock, mhdp->dp.link.num_lanes,
-+				      link_rate);
-+			goto err_config_video;
-+		}
-+	} while ((symbol <= 1) || (tu_size_reg - symbol < 4) ||
-+		 (rem > 850) || (rem < 100));
-+
-+	val = symbol + (tu_size_reg << 8);
-+	val |= TU_CNT_RST_EN;
-+	ret = cdns_mhdp_reg_write(mhdp, DP_FRAMER_TU, val);
-+	if (ret)
-+		goto err_config_video;
-+
-+	/* set the FIFO Buffer size */
-+	val = div_u64(mode->clock * (symbol + 1), 1000) + link_rate;
-+	val /= (mhdp->dp.link.num_lanes * link_rate);
-+	val = div_u64(8 * (symbol + 1), bit_per_pix) - val;
-+	val += 2;
-+	ret = cdns_mhdp_reg_write(mhdp, DP_VC_TABLE(15), val);
-+
-+	switch (video->color_depth) {
-+	case 6:
-+		val = BCS_6;
-+		break;
-+	case 8:
-+		val = BCS_8;
-+		break;
-+	case 10:
-+		val = BCS_10;
-+		break;
-+	case 12:
-+		val = BCS_12;
-+		break;
-+	case 16:
-+		val = BCS_16;
-+		break;
-+	};
-+
-+	val += video->color_fmt << 8;
-+	ret = cdns_mhdp_reg_write(mhdp, DP_FRAMER_PXL_REPR, val);
-+	if (ret)
-+		goto err_config_video;
-+
-+	val = video->h_sync_polarity ? DP_FRAMER_SP_HSP : 0;
-+	val |= video->v_sync_polarity ? DP_FRAMER_SP_VSP : 0;
-+	ret = cdns_mhdp_reg_write(mhdp, DP_FRAMER_SP, val);
-+	if (ret)
-+		goto err_config_video;
-+
-+	val = (mode->hsync_start - mode->hdisplay) << 16;
-+	val |= mode->htotal - mode->hsync_end;
-+	ret = cdns_mhdp_reg_write(mhdp, DP_FRONT_BACK_PORCH, val);
-+	if (ret)
-+		goto err_config_video;
-+
-+	val = mode->hdisplay * bit_per_pix / 8;
-+	ret = cdns_mhdp_reg_write(mhdp, DP_BYTE_COUNT, val);
-+	if (ret)
-+		goto err_config_video;
-+
-+	val = mode->htotal | ((mode->htotal - mode->hsync_start) << 16);
-+	ret = cdns_mhdp_reg_write(mhdp, MSA_HORIZONTAL_0, val);
-+	if (ret)
-+		goto err_config_video;
-+
-+	val = mode->hsync_end - mode->hsync_start;
-+	val |= (mode->hdisplay << 16) | (video->h_sync_polarity << 15);
-+	ret = cdns_mhdp_reg_write(mhdp, MSA_HORIZONTAL_1, val);
-+	if (ret)
-+		goto err_config_video;
-+
-+	val = mode->vtotal;
-+	val |= (mode->vtotal - mode->vsync_start) << 16;
-+	ret = cdns_mhdp_reg_write(mhdp, MSA_VERTICAL_0, val);
-+	if (ret)
-+		goto err_config_video;
-+
-+	val = mode->vsync_end - mode->vsync_start;
-+	val |= (mode->vdisplay << 16) | (video->v_sync_polarity << 15);
-+	ret = cdns_mhdp_reg_write(mhdp, MSA_VERTICAL_1, val);
-+	if (ret)
-+		goto err_config_video;
-+
-+	val = cdns_mhdp_get_msa_misc(video, mode);
-+	ret = cdns_mhdp_reg_write(mhdp, MSA_MISC, val);
-+	if (ret)
-+		goto err_config_video;
-+
-+	ret = cdns_mhdp_reg_write(mhdp, STREAM_CONFIG, 1);
-+	if (ret)
-+		goto err_config_video;
-+
-+	val = mode->hsync_end - mode->hsync_start;
-+	val |= mode->hdisplay << 16;
-+	ret = cdns_mhdp_reg_write(mhdp, DP_HORIZONTAL, val);
-+	if (ret)
-+		goto err_config_video;
-+
-+	val = mode->vdisplay;
-+	val |= (mode->vtotal - mode->vsync_start) << 16;
-+	ret = cdns_mhdp_reg_write(mhdp, DP_VERTICAL_0, val);
-+	if (ret)
-+		goto err_config_video;
-+
-+	val = mode->vtotal;
-+	ret = cdns_mhdp_reg_write(mhdp, DP_VERTICAL_1, val);
-+	if (ret)
-+		goto err_config_video;
-+
-+	ret = cdns_mhdp_reg_write_bit(mhdp, DP_VB_ID, 2, 1, 0);
-+
-+err_config_video:
-+	if (ret)
-+		DRM_DEV_ERROR(mhdp->dev, "config video failed: %d\n", ret);
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_config_video);
-+
-+int cdns_mhdp_audio_stop(struct cdns_mhdp_device *mhdp,
-+			 struct audio_info *audio)
-+{
-+	int ret;
-+
-+	ret = cdns_mhdp_reg_write(mhdp, AUDIO_PACK_CONTROL, 0);
-+	if (ret) {
-+		DRM_DEV_ERROR(mhdp->dev, "audio stop failed: %d\n", ret);
-+		return ret;
-+	}
-+
-+	writel(0, mhdp->regs + SPDIF_CTRL_ADDR);
-+
-+	/* clearn the audio config and reset */
-+	writel(0, mhdp->regs + AUDIO_SRC_CNTL);
-+	writel(0, mhdp->regs + AUDIO_SRC_CNFG);
-+	writel(AUDIO_SW_RST, mhdp->regs + AUDIO_SRC_CNTL);
-+	writel(0, mhdp->regs + AUDIO_SRC_CNTL);
-+
-+	/* reset smpl2pckt component  */
-+	writel(0, mhdp->regs + SMPL2PKT_CNTL);
-+	writel(AUDIO_SW_RST, mhdp->regs + SMPL2PKT_CNTL);
-+	writel(0, mhdp->regs + SMPL2PKT_CNTL);
-+
-+	/* reset FIFO */
-+	writel(AUDIO_SW_RST, mhdp->regs + FIFO_CNTL);
-+	writel(0, mhdp->regs + FIFO_CNTL);
-+
-+	if (audio->format == AFMT_SPDIF)
-+		clk_disable_unprepare(mhdp->spdif_clk);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_audio_stop);
-+
-+int cdns_mhdp_audio_mute(struct cdns_mhdp_device *mhdp, bool enable)
-+{
-+	int ret;
-+
-+	ret = cdns_mhdp_reg_write_bit(mhdp, DP_VB_ID, 4, 1, enable);
-+	if (ret)
-+		DRM_DEV_ERROR(mhdp->dev, "audio mute failed: %d\n", ret);
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_audio_mute);
-+
-+static void cdns_mhdp_audio_config_i2s(struct cdns_mhdp_device *mhdp,
-+				       struct audio_info *audio)
-+{
-+	int sub_pckt_num = 1, i2s_port_en_val = 0xf, i;
-+	u32 val;
-+
-+	if (audio->channels == 2) {
-+		if (mhdp->dp.link.num_lanes == 1)
-+			sub_pckt_num = 2;
-+		else
-+			sub_pckt_num = 4;
-+
-+		i2s_port_en_val = 1;
-+	} else if (audio->channels == 4) {
-+		i2s_port_en_val = 3;
-+	}
-+
-+	writel(0x0, mhdp->regs + SPDIF_CTRL_ADDR);
-+
-+	writel(SYNC_WR_TO_CH_ZERO, mhdp->regs + FIFO_CNTL);
-+
-+	val = MAX_NUM_CH(audio->channels);
-+	val |= NUM_OF_I2S_PORTS(audio->channels);
-+	val |= AUDIO_TYPE_LPCM;
-+	val |= CFG_SUB_PCKT_NUM(sub_pckt_num);
-+	writel(val, mhdp->regs + SMPL2PKT_CNFG);
-+
-+	if (audio->sample_width == 16)
-+		val = 0;
-+	else if (audio->sample_width == 24)
-+		val = 1 << 9;
-+	else
-+		val = 2 << 9;
-+
-+	val |= AUDIO_CH_NUM(audio->channels);
-+	val |= I2S_DEC_PORT_EN(i2s_port_en_val);
-+	val |= TRANS_SMPL_WIDTH_32;
-+	writel(val, mhdp->regs + AUDIO_SRC_CNFG);
-+
-+	for (i = 0; i < (audio->channels + 1) / 2; i++) {
-+		if (audio->sample_width == 16)
-+			val = (0x02 << 8) | (0x02 << 20);
-+		else if (audio->sample_width == 24)
-+			val = (0x0b << 8) | (0x0b << 20);
-+
-+		val |= ((2 * i) << 4) | ((2 * i + 1) << 16);
-+		writel(val, mhdp->regs + STTS_BIT_CH(i));
-+	}
-+
-+	switch (audio->sample_rate) {
-+	case 32000:
-+		val = SAMPLING_FREQ(3) |
-+		      ORIGINAL_SAMP_FREQ(0xc);
-+		break;
-+	case 44100:
-+		val = SAMPLING_FREQ(0) |
-+		      ORIGINAL_SAMP_FREQ(0xf);
-+		break;
-+	case 48000:
-+		val = SAMPLING_FREQ(2) |
-+		      ORIGINAL_SAMP_FREQ(0xd);
-+		break;
-+	case 88200:
-+		val = SAMPLING_FREQ(8) |
-+		      ORIGINAL_SAMP_FREQ(0x7);
-+		break;
-+	case 96000:
-+		val = SAMPLING_FREQ(0xa) |
-+		      ORIGINAL_SAMP_FREQ(5);
-+		break;
-+	case 176400:
-+		val = SAMPLING_FREQ(0xc) |
-+		      ORIGINAL_SAMP_FREQ(3);
-+		break;
-+	case 192000:
-+		val = SAMPLING_FREQ(0xe) |
-+		      ORIGINAL_SAMP_FREQ(1);
-+		break;
-+	}
-+	val |= 4;
-+	writel(val, mhdp->regs + COM_CH_STTS_BITS);
-+
-+	writel(SMPL2PKT_EN, mhdp->regs + SMPL2PKT_CNTL);
-+	writel(I2S_DEC_START, mhdp->regs + AUDIO_SRC_CNTL);
-+}
-+
-+static void cdns_mhdp_audio_config_spdif(struct cdns_mhdp_device *mhdp)
-+{
-+	u32 val;
-+
-+	writel(SYNC_WR_TO_CH_ZERO, mhdp->regs + FIFO_CNTL);
-+
-+	val = MAX_NUM_CH(2) | AUDIO_TYPE_LPCM | CFG_SUB_PCKT_NUM(4);
-+	writel(val, mhdp->regs + SMPL2PKT_CNFG);
-+	writel(SMPL2PKT_EN, mhdp->regs + SMPL2PKT_CNTL);
-+
-+	val = SPDIF_ENABLE | SPDIF_AVG_SEL | SPDIF_JITTER_BYPASS;
-+	writel(val, mhdp->regs + SPDIF_CTRL_ADDR);
-+
-+	clk_prepare_enable(mhdp->spdif_clk);
-+	clk_set_rate(mhdp->spdif_clk, CDNS_DP_SPDIF_CLK);
-+}
-+
-+int cdns_mhdp_audio_config(struct cdns_mhdp_device *mhdp,
-+			   struct audio_info *audio)
-+{
-+	int ret;
-+
-+	/* reset the spdif clk before config */
-+	if (audio->format == AFMT_SPDIF) {
-+		reset_control_assert(mhdp->spdif_rst);
-+		reset_control_deassert(mhdp->spdif_rst);
-+	}
-+
-+	ret = cdns_mhdp_reg_write(mhdp, CM_LANE_CTRL, LANE_REF_CYC);
-+	if (ret)
-+		goto err_audio_config;
-+
-+	ret = cdns_mhdp_reg_write(mhdp, CM_CTRL, 0);
-+	if (ret)
-+		goto err_audio_config;
-+
-+	if (audio->format == AFMT_I2S)
-+		cdns_mhdp_audio_config_i2s(mhdp, audio);
-+	else if (audio->format == AFMT_SPDIF)
-+		cdns_mhdp_audio_config_spdif(mhdp);
-+
-+	ret = cdns_mhdp_reg_write(mhdp, AUDIO_PACK_CONTROL, AUDIO_PACK_EN);
-+
-+err_audio_config:
-+	if (ret)
-+		DRM_DEV_ERROR(mhdp->dev, "audio config failed: %d\n", ret);
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_audio_config);
-+
-+int cdns_mhdp_adjust_lt(struct cdns_mhdp_device *mhdp,
-+			u8 nlanes, u16 udelay, u8 *lanes_data, u8 *dpcd)
-+{
-+	u8 payload[7];
-+	u8 hdr[5]; /* For DPCD read response header */
-+	u32 addr;
-+	u8 const nregs = 6; /* Registers 0x202-0x207 */
-+	int ret;
-+
-+	if (nlanes != 4 && nlanes != 2 && nlanes != 1) {
-+		DRM_DEV_ERROR(mhdp->dev, "invalid number of lanes: %d\n",
-+			      nlanes);
-+		ret = -EINVAL;
-+		goto err_adjust_lt;
-+	}
-+
-+	payload[0] = nlanes;
-+	put_unaligned_be16(udelay, payload + 1);
-+	memcpy(payload + 3, lanes_data, nlanes);
-+
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
-+				     DPTX_ADJUST_LT,
-+				     sizeof(payload), payload);
-+	if (ret)
-+		goto err_adjust_lt;
-+
-+	/* Yes, read the DPCD read command response */
-+	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_DP_TX,
-+						 DPTX_READ_DPCD,
-+						 sizeof(hdr) + nregs);
-+	if (ret)
-+		goto err_adjust_lt;
-+
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, hdr, sizeof(hdr));
-+	if (ret)
-+		goto err_adjust_lt;
-+
-+	addr = get_unaligned_be24(hdr + 2);
-+	if (addr != DP_LANE0_1_STATUS)
-+		goto err_adjust_lt;
-+
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, dpcd, nregs);
-+
-+err_adjust_lt:
-+	if (ret)
-+		DRM_DEV_ERROR(mhdp->dev, "Failed to adjust Link Training.\n");
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_adjust_lt);
-+
-+int cdns_phy_reg_write(struct cdns_mhdp_device *mhdp, u32 addr, u32 val)
-+{
-+	return cdns_mhdp_reg_write(mhdp, ADDR_PHY_AFE + (addr << 2), val);
-+}
-+EXPORT_SYMBOL(cdns_phy_reg_write);
-+
-+u32 cdns_phy_reg_read(struct cdns_mhdp_device *mhdp, u32 addr)
-+{
-+	return cdns_mhdp_reg_read(mhdp, ADDR_PHY_AFE + (addr << 2));
-+}
-+EXPORT_SYMBOL(cdns_phy_reg_read);
-+
-+int cdns_mhdp_read_hpd(struct cdns_mhdp_device *mhdp)
-+{
-+	u8 status;
-+	int ret;
-+
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_GENERAL, GENERAL_GET_HPD_STATE,
-+				  0, NULL);
-+	if (ret)
-+		goto err_get_hpd;
-+
-+	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_GENERAL,
-+							GENERAL_GET_HPD_STATE, sizeof(status));
-+	if (ret)
-+		goto err_get_hpd;
-+
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, &status, sizeof(status));
-+	if (ret)
-+		goto err_get_hpd;
-+
-+	return status;
-+
-+err_get_hpd:
-+	DRM_ERROR("read hpd  failed: %d\n", ret);
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_read_hpd);
-+
-+bool cdns_mhdp_check_alive(struct cdns_mhdp_device *mhdp)
-+{
-+	u32  alive, newalive;
-+	u8 retries_left = 10;
-+
-+	alive = readl(mhdp->regs + KEEP_ALIVE);
-+
-+	while (retries_left--) {
-+		udelay(2);
-+
-+		newalive = readl(mhdp->regs + KEEP_ALIVE);
-+		if (alive == newalive)
-+			continue;
-+		return true;
-+	}
-+	return false;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_check_alive);
---- /dev/null
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-hdmi.c
-@@ -0,0 +1,296 @@
-+/*
-+ * Copyright (C) 2019 NXP Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <drm/drmP.h>
-+#include <linux/io.h>
-+#include <drm/bridge/cdns-mhdp-common.h>
-+
-+int cdns_hdmi_get_edid_block(void *data, u8 *edid,
-+			  u32 block, size_t length)
-+{
-+	struct cdns_mhdp_device *mhdp = data;
-+	u8 msg[2], reg[5], i;
-+	int ret;
-+
-+	for (i = 0; i < 4; i++) {
-+		msg[0] = block / 2;
-+		msg[1] = block % 2;
-+
-+		ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_HDMI_TX, HDMI_TX_EDID,
-+					  sizeof(msg), msg);
-+		if (ret)
-+			continue;
-+
-+		ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_HDMI_TX,
-+						      HDMI_TX_EDID, sizeof(reg) + length);
-+		if (ret)
-+			continue;
-+
-+		ret = cdns_mhdp_mailbox_read_receive(mhdp, reg, sizeof(reg));
-+		if (ret)
-+			continue;
-+
-+		ret = cdns_mhdp_mailbox_read_receive(mhdp, edid, length);
-+		if (ret)
-+			continue;
-+
-+		if ((reg[3] << 8 | reg[4]) == length)
-+			break;
-+	}
-+
-+	if (ret)
-+		DRM_ERROR("get block[%d] edid failed: %d\n", block, ret);
-+	return ret;
-+}
-+
-+int cdns_hdmi_scdc_read(struct cdns_mhdp_device *mhdp, u8 addr, u8 *data)
-+{
-+	u8 msg[4], reg[6];
-+	int ret;
-+
-+	msg[0] = 0x54;
-+	msg[1] = addr;
-+	msg[2] = 0;
-+	msg[3] = 1;
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_HDMI_TX, HDMI_TX_READ,
-+				  sizeof(msg), msg);
-+	if (ret)
-+		goto err_scdc_read;
-+
-+	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_HDMI_TX,
-+					      HDMI_TX_READ, sizeof(reg));
-+	if (ret)
-+		goto err_scdc_read;
-+
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, reg, sizeof(reg));
-+	if (ret)
-+		goto err_scdc_read;
-+
-+	*data = reg[5];
-+
-+err_scdc_read:
-+	if (ret)
-+		DRM_ERROR("scdc read failed: %d\n", ret);
-+	return ret;
-+}
-+
-+int cdns_hdmi_scdc_write(struct cdns_mhdp_device *mhdp, u8 addr, u8 value)
-+{
-+	u8 msg[5], reg[5];
-+	int ret;
-+
-+	msg[0] = 0x54;
-+	msg[1] = addr;
-+	msg[2] = 0;
-+	msg[3] = 1;
-+	msg[4] = value;
-+	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_HDMI_TX, HDMI_TX_WRITE,
-+				  sizeof(msg), msg);
-+	if (ret)
-+		goto err_scdc_write;
-+
-+	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_HDMI_TX,
-+					      HDMI_TX_WRITE, sizeof(reg));
-+	if (ret)
-+		goto err_scdc_write;
-+
-+	ret = cdns_mhdp_mailbox_read_receive(mhdp, reg, sizeof(reg));
-+	if (ret)
-+		goto err_scdc_write;
-+
-+	if (reg[0] != 0)
-+		ret = -EINVAL;
-+
-+err_scdc_write:
-+	if (ret)
-+		DRM_ERROR("scdc write failed: %d\n", ret);
-+	return ret;
-+}
-+
-+int cdns_hdmi_ctrl_init(struct cdns_mhdp_device *mhdp,
-+				 int protocol,
-+				 u32 char_rate)
-+{
-+	u32 reg0;
-+	u32 reg1;
-+	u32 val;
-+	int ret;
-+
-+	/* Set PHY to HDMI data */
-+	ret = cdns_mhdp_reg_write(mhdp, PHY_DATA_SEL, F_SOURCE_PHY_MHDP_SEL(1));
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = cdns_mhdp_reg_write(mhdp, HDTX_HPD,
-+					F_HPD_VALID_WIDTH(4) | F_HPD_GLITCH_WIDTH(0));
-+	if (ret < 0)
-+		return ret;
-+
-+	/* open CARS */
-+	ret = cdns_mhdp_reg_write(mhdp, SOURCE_PHY_CAR, 0xF);
-+	if (ret < 0)
-+		return ret;
-+	ret = cdns_mhdp_reg_write(mhdp, SOURCE_HDTX_CAR, 0xFF);
-+	if (ret < 0)
-+		return ret;
-+	ret = cdns_mhdp_reg_write(mhdp, SOURCE_PKT_CAR, 0xF);
-+	if (ret < 0)
-+		return ret;
-+	ret = cdns_mhdp_reg_write(mhdp, SOURCE_AIF_CAR, 0xF);
-+	if (ret < 0)
-+		return ret;
-+	ret = cdns_mhdp_reg_write(mhdp, SOURCE_CIPHER_CAR, 0xF);
-+	if (ret < 0)
-+		return ret;
-+	ret = cdns_mhdp_reg_write(mhdp, SOURCE_CRYPTO_CAR, 0xF);
-+	if (ret < 0)
-+		return ret;
-+	ret = cdns_mhdp_reg_write(mhdp, SOURCE_CEC_CAR, 3);
-+	if (ret < 0)
-+		return ret;
-+
-+	reg0 = reg1 = 0x7c1f;
-+	if (protocol == MODE_HDMI_2_0 && char_rate >= 340000) {
-+		reg0 = 0;
-+		reg1 = 0xFFFFF;
-+	}
-+	ret = cdns_mhdp_reg_write(mhdp, HDTX_CLOCK_REG_0, reg0);
-+	if (ret < 0)
-+		return ret;
-+	ret = cdns_mhdp_reg_write(mhdp, HDTX_CLOCK_REG_1, reg1);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* set hdmi mode and preemble mode data enable */
-+	val = F_HDMI_MODE(protocol) | F_HDMI2_PREAMBLE_EN(1) |  F_DATA_EN(1) |
-+			F_HDMI2_CTRL_IL_MODE(1) | F_BCH_EN(1) | F_PIC_3D(0XF);
-+	ret = cdns_mhdp_reg_write(mhdp, HDTX_CONTROLLER, val);
-+
-+	return ret;
-+}
-+
-+int cdns_hdmi_mode_config(struct cdns_mhdp_device *mhdp,
-+					      struct drm_display_mode *mode,
-+						  struct video_info *video_info)
-+{
-+	int ret;
-+	u32 val;
-+	u32 vsync_lines = mode->vsync_end - mode->vsync_start;
-+	u32 eof_lines = mode->vsync_start - mode->vdisplay;
-+	u32 sof_lines = mode->vtotal - mode->vsync_end;
-+	u32 hblank = mode->htotal - mode->hdisplay;
-+	u32 hactive = mode->hdisplay;
-+	u32 vblank = mode->vtotal - mode->vdisplay;
-+	u32 vactive = mode->vdisplay;
-+	u32 hfront = mode->hsync_start - mode->hdisplay;
-+	u32 hback = mode->htotal - mode->hsync_end;
-+	u32 vfront = eof_lines;
-+	u32 hsync = hblank - hfront - hback;
-+	u32 vsync = vsync_lines;
-+	u32 vback = sof_lines;
-+	u32 v_h_polarity = ((mode->flags & DRM_MODE_FLAG_NHSYNC) ? 0 : 1) +
-+						((mode->flags & DRM_MODE_FLAG_NVSYNC) ? 0 : 2);
-+
-+	ret = cdns_mhdp_reg_write(mhdp, SCHEDULER_H_SIZE, (hactive << 16) + hblank);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = cdns_mhdp_reg_write(mhdp, SCHEDULER_V_SIZE, (vactive << 16) + vblank);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = cdns_mhdp_reg_write(mhdp, HDTX_SIGNAL_FRONT_WIDTH, (vfront << 16) + hfront);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = cdns_mhdp_reg_write(mhdp, HDTX_SIGNAL_SYNC_WIDTH, (vsync << 16) + hsync);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = cdns_mhdp_reg_write(mhdp, HDTX_SIGNAL_BACK_WIDTH, (vback << 16) + hback);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = cdns_mhdp_reg_write(mhdp, HSYNC2VSYNC_POL_CTRL, v_h_polarity);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Reset Data Enable */
-+	val = cdns_mhdp_reg_read(mhdp, HDTX_CONTROLLER);
-+	val &= ~F_DATA_EN(1);
-+	ret = cdns_mhdp_reg_write(mhdp, HDTX_CONTROLLER, val);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Set bpc */
-+	val &= ~F_VIF_DATA_WIDTH(3);
-+	switch (video_info->color_depth) {
-+	case 10:
-+		val |= F_VIF_DATA_WIDTH(1);
-+		break;
-+	case 12:
-+		val |= F_VIF_DATA_WIDTH(2);
-+		break;
-+	case 16:
-+		val |= F_VIF_DATA_WIDTH(3);
-+		break;
-+	case 8:
-+	default:
-+		val |= F_VIF_DATA_WIDTH(0);
-+		break;
-+	}
-+
-+	/* select color encoding */
-+	val &= ~F_HDMI_ENCODING(3);
-+	switch (video_info->color_fmt) {
-+	case YCBCR_4_4_4:
-+		val |= F_HDMI_ENCODING(2);
-+		break;
-+	case YCBCR_4_2_2:
-+		val |= F_HDMI_ENCODING(1);
-+		break;
-+	case YCBCR_4_2_0:
-+		val |= F_HDMI_ENCODING(3);
-+		break;
-+	case PXL_RGB:
-+	default:
-+		val |= F_HDMI_ENCODING(0);
-+		break;
-+	}
-+
-+	ret = cdns_mhdp_reg_write(mhdp, HDTX_CONTROLLER, val);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* set data enable */
-+	val |= F_DATA_EN(1);
-+	ret = cdns_mhdp_reg_write(mhdp, HDTX_CONTROLLER, val);
-+
-+	return ret;
-+}
-+
-+int cdns_hdmi_disable_gcp(struct cdns_mhdp_device *mhdp)
-+{
-+	u32 val;
-+
-+	val = cdns_mhdp_reg_read(mhdp, HDTX_CONTROLLER);
-+	val &= ~F_GCP_EN(1);
-+
-+	return cdns_mhdp_reg_write(mhdp, HDTX_CONTROLLER, val);
-+}
-+
-+int cdns_hdmi_enable_gcp(struct cdns_mhdp_device *mhdp)
-+{
-+	u32 val;
-+
-+	val = cdns_mhdp_reg_read(mhdp, HDTX_CONTROLLER);
-+	val |= F_GCP_EN(1);
-+
-+	return cdns_mhdp_reg_write(mhdp, HDTX_CONTROLLER, val);
-+}
---- /dev/null
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp.h
-@@ -0,0 +1,209 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Cadence MHDP DP MST bridge driver.
-+ *
-+ * Copyright: 2018 Cadence Design Systems, Inc.
-+ *
-+ * Author: Quentin Schulz <quentin.schulz@free-electrons.com>
-+ */
-+
-+
-+#ifndef CDNS_MHDP_H
-+#define CDNS_MHDP_H
-+
-+#include <drm/drm_dp_mst_helper.h>
-+
-+#define CDNS_APB_CFG				0x00000
-+#define CDNS_APB_CTRL				(CDNS_APB_CFG + 0x00)
-+#define CDNS_MAILBOX_FULL			(CDNS_APB_CFG + 0x08)
-+#define CDNS_MAILBOX_EMPTY			(CDNS_APB_CFG + 0x0c)
-+#define CDNS_MAILBOX_TX_DATA			(CDNS_APB_CFG + 0x10)
-+#define CDNS_MAILBOX_RX_DATA			(CDNS_APB_CFG + 0x14)
-+#define CDNS_KEEP_ALIVE				(CDNS_APB_CFG + 0x18)
-+#define CDNS_KEEP_ALIVE_MASK			GENMASK(7, 0)
-+
-+#define CDNS_MB_INT_MASK			(CDNS_APB_CFG + 0x34)
-+
-+#define CDNS_SW_CLK_L				(CDNS_APB_CFG + 0x3c)
-+#define CDNS_SW_CLK_H				(CDNS_APB_CFG + 0x40)
-+#define CDNS_SW_EVENT0				(CDNS_APB_CFG + 0x44)
-+#define CDNS_DPTX_HPD				BIT(0)
-+
-+#define CDNS_SW_EVENT1				(CDNS_APB_CFG + 0x48)
-+#define CDNS_SW_EVENT2				(CDNS_APB_CFG + 0x4c)
-+#define CDNS_SW_EVENT3				(CDNS_APB_CFG + 0x50)
-+
-+#define CDNS_APB_INT_MASK			(CDNS_APB_CFG + 0x6C)
-+#define CDNS_APB_INT_MASK_MAILBOX_INT		BIT(0)
-+#define CDNS_APB_INT_MASK_SW_EVENT_INT		BIT(1)
-+
-+#define CDNS_DPTX_CAR				(CDNS_APB_CFG + 0x904)
-+#define CDNS_VIF_CLK_EN				BIT(0)
-+#define CDNS_VIF_CLK_RSTN			BIT(1)
-+
-+#define CDNS_SOURCE_VIDEO_IF(s)			(0x00b00 + (s * 0x20))
-+#define CDNS_BND_HSYNC2VSYNC(s)			(CDNS_SOURCE_VIDEO_IF(s) + \
-+						 0x00)
-+#define CDNS_IP_DTCT_WIN			GENMASK(11, 0)
-+#define CDNS_IP_DET_INTERLACE_FORMAT		BIT(12)
-+#define CDNS_IP_BYPASS_V_INTERFACE		BIT(13)
-+
-+#define CDNS_HSYNC2VSYNC_POL_CTRL(s)		(CDNS_SOURCE_VIDEO_IF(s) + \
-+						 0x10)
-+#define CDNS_H2V_HSYNC_POL_ACTIVE_LOW		BIT(1)
-+#define CDNS_H2V_VSYNC_POL_ACTIVE_LOW		BIT(2)
-+
-+#define CDNS_DPTX_PHY_CONFIG			0x02000
-+#define CDNS_PHY_TRAINING_EN			BIT(0)
-+#define CDNS_PHY_TRAINING_TYPE(x)		(((x) & GENMASK(3, 0)) << 1)
-+#define CDNS_PHY_SCRAMBLER_BYPASS		BIT(5)
-+#define CDNS_PHY_ENCODER_BYPASS			BIT(6)
-+#define CDNS_PHY_SKEW_BYPASS			BIT(7)
-+#define CDNS_PHY_TRAINING_AUTO			BIT(8)
-+#define CDNS_PHY_LANE0_SKEW(x)			(((x) & GENMASK(2, 0)) << 9)
-+#define CDNS_PHY_LANE1_SKEW(x)			(((x) & GENMASK(2, 0)) << 12)
-+#define CDNS_PHY_LANE2_SKEW(x)			(((x) & GENMASK(2, 0)) << 15)
-+#define CDNS_PHY_LANE3_SKEW(x)			(((x) & GENMASK(2, 0)) << 18)
-+#define CDNS_PHY_COMMON_CONFIG			(CDNS_PHY_LANE1_SKEW(1) | \
-+						CDNS_PHY_LANE2_SKEW(2) |  \
-+						CDNS_PHY_LANE3_SKEW(3))
-+#define CDNS_PHY_10BIT_EN			BIT(21)
-+
-+#define CDNS_DPTX_FRAMER			0x02200
-+#define CDNS_DP_FRAMER_GLOBAL_CONFIG		(CDNS_DPTX_FRAMER + 0x00)
-+#define CDNS_DP_NUM_LANES(x)			(x - 1)
-+#define CDNS_DP_MST_EN				BIT(2)
-+#define CDNS_DP_FRAMER_EN			BIT(3)
-+#define CDNS_DP_RATE_GOVERNOR_EN		BIT(4)
-+#define CDNS_DP_NO_VIDEO_MODE			BIT(5)
-+#define CDNS_DP_DISABLE_PHY_RST			BIT(6)
-+#define CDNS_DP_WR_FAILING_EDGE_VSYNC		BIT(7)
-+
-+#define CDNS_DP_SW_RESET			(CDNS_DPTX_FRAMER + 0x04)
-+#define CDNS_DP_FRAMER_TU			(CDNS_DPTX_FRAMER + 0x08)
-+#define CDNS_DP_FRAMER_TU_SIZE(x)		(((x) & GENMASK(6, 0)) << 8)
-+#define CDNS_DP_FRAMER_TU_VS(x)			((x) & GENMASK(5, 0))
-+#define CDNS_DP_FRAMER_TU_CNT_RST_EN		BIT(15)
-+
-+#define CDNS_DPTX_STREAM(s)			(0x03000 + s * 0x80)
-+#define CDNS_DP_MSA_HORIZONTAL_0(s)		(CDNS_DPTX_STREAM(s) + 0x00)
-+#define CDNS_DP_MSAH0_H_TOTAL(x)		(x)
-+#define CDNS_DP_MSAH0_HSYNC_START(x)		((x) << 16)
-+
-+#define CDNS_DP_MSA_HORIZONTAL_1(s)		(CDNS_DPTX_STREAM(s) + 0x04)
-+#define CDNS_DP_MSAH1_HSYNC_WIDTH(x)		(x)
-+#define CDNS_DP_MSAH1_HSYNC_POL_LOW		BIT(15)
-+#define CDNS_DP_MSAH1_HDISP_WIDTH(x)		((x) << 16)
-+
-+#define CDNS_DP_MSA_VERTICAL_0(s)		(CDNS_DPTX_STREAM(s) + 0x08)
-+#define CDNS_DP_MSAV0_V_TOTAL(x)		(x)
-+#define CDNS_DP_MSAV0_VSYNC_START(x)		((x) << 16)
-+
-+#define CDNS_DP_MSA_VERTICAL_1(s)		(CDNS_DPTX_STREAM(s) + 0x0c)
-+#define CDNS_DP_MSAV1_VSYNC_WIDTH(x)		(x)
-+#define CDNS_DP_MSAV1_VSYNC_POL_LOW		BIT(15)
-+#define CDNS_DP_MSAV1_VDISP_WIDTH(x)		((x) << 16)
-+
-+#define CDNS_DP_MSA_MISC(s)			(CDNS_DPTX_STREAM(s) + 0x10)
-+#define CDNS_DP_STREAM_CONFIGs(s)		(CDNS_DPTX_STREAM(s) + 0x14)
-+#define CDNS_DP_STREAM_CONFIG_2(s)		(CDNS_DPTX_STREAM(s) + 0x2c)
-+#define CDNS_DP_SC2_TU_VS_DIFF(x)		((x) << 8)
-+
-+#define CDNS_DP_HORIZONTAL(s)			(CDNS_DPTX_STREAM(s) + 0x30)
-+#define CDNS_DP_H_HSYNC_WIDTH(x)		(x)
-+#define CDNS_DP_H_H_TOTAL(x)			((x) << 16)
-+
-+#define CDNS_DP_VERTICAL_0(s)			(CDNS_DPTX_STREAM(s) + 0x34)
-+#define CDNS_DP_V0_VHEIGHT(x)			(x)
-+#define CDNS_DP_V0_VSTART(x)			((x) << 16)
-+
-+#define CDNS_DP_VERTICAL_1(s)			(CDNS_DPTX_STREAM(s) + 0x38)
-+#define CDNS_DP_V1_VTOTAL(x)			(x)
-+#define CDNS_DP_V1_VTOTAL_EVEN			BIT(16)
-+
-+#define CDNS_DP_FRAMER_PXL_REPR(s)		(CDNS_DPTX_STREAM(s) + 0x4c)
-+#define CDNS_DP_FRAMER_6_BPC			BIT(0)
-+#define CDNS_DP_FRAMER_8_BPC			BIT(1)
-+#define CDNS_DP_FRAMER_10_BPC			BIT(2)
-+#define CDNS_DP_FRAMER_12_BPC			BIT(3)
-+#define CDNS_DP_FRAMER_16_BPC			BIT(4)
-+#define CDNS_DP_FRAMER_PXL_FORMAT		0x8
-+#define CDNS_DP_FRAMER_RGB			BIT(0)
-+#define CDNS_DP_FRAMER_YCBCR444			BIT(1)
-+#define CDNS_DP_FRAMER_YCBCR422			BIT(2)
-+#define CDNS_DP_FRAMER_YCBCR420			BIT(3)
-+#define CDNS_DP_FRAMER_Y_ONLY			BIT(4)
-+
-+#define CDNS_DP_FRAMER_SP(s)			(CDNS_DPTX_STREAM(s) + 0x10)
-+#define CDNS_DP_FRAMER_VSYNC_POL_LOW		BIT(0)
-+#define CDNS_DP_FRAMER_HSYNC_POL_LOW		BIT(1)
-+#define CDNS_DP_FRAMER_INTERLACE		BIT(2)
-+
-+#define CDNS_DP_LINE_THRESH(s)			(CDNS_DPTX_STREAM(s) + 0x64)
-+#define CDNS_DP_ACTIVE_LINE_THRESH(x)		(x)
-+
-+#define CDNS_DP_VB_ID(s)			(CDNS_DPTX_STREAM(s) + 0x68)
-+#define CDNS_DP_VB_ID_INTERLACED		BIT(2)
-+#define CDNS_DP_VB_ID_COMPRESSED		BIT(6)
-+
-+#define CDNS_DP_FRONT_BACK_PORCH(s)		(CDNS_DPTX_STREAM(s) + 0x78)
-+#define CDNS_DP_BACK_PORCH(x)			(x)
-+#define CDNS_DP_FRONT_PORCH(x)			((x) << 16)
-+
-+#define CDNS_DP_BYTE_COUNT(s)			(CDNS_DPTX_STREAM(s) + 0x7c)
-+#define CDNS_DP_BYTE_COUNT_BYTES_IN_CHUNK_SHIFT	16
-+
-+#define CDNS_DP_MST_STREAM_CONFIG(s)		(CDNS_DPTX_STREAM(s) + 0x14)
-+#define CDNS_DP_MST_STRM_CFG_STREAM_EN		BIT(0)
-+#define CDNS_DP_MST_STRM_CFG_NO_VIDEO		BIT(1)
-+
-+#define CDNS_DP_MST_SLOT_ALLOCATE(s)		(CDNS_DPTX_STREAM(s) + 0x44)
-+#define CDNS_DP_S_ALLOC_START_SLOT(x)		(x)
-+#define CDNS_DP_S_ALLOC_END_SLOT(x)		((x) << 8)
-+
-+#define CDNS_DP_RATE_GOVERNING(s)		(CDNS_DPTX_STREAM(s) + 0x48)
-+#define CDNS_DP_RG_TARG_AV_SLOTS_Y(x)		(x)
-+#define CDNS_DP_RG_TARG_AV_SLOTS_X(x)		(x << 4)
-+#define CDNS_DP_RG_ENABLE			BIT(10)
-+
-+#define CDNS_DP_MTPH_CONTROL			0x2264
-+#define CDNS_DP_MTPH_ECF_EN			BIT(0)
-+#define CDNS_DP_MTPH_ACT_EN			BIT(1)
-+#define CDNS_DP_MTPH_LVP_EN			BIT(2)
-+
-+#define CDNS_DP_MTPH_STATUS			0x226C
-+#define CDNS_DP_MTPH_ACT_STATUS			BIT(0)
-+
-+
-+#define CDNS_DPTX_GLOBAL			0x02300
-+#define CDNS_DP_LANE_EN				(CDNS_DPTX_GLOBAL + 0x00)
-+#define CDNS_DP_LANE_EN_LANES(x)		GENMASK(x - 1, 0)
-+#define CDNS_DP_ENHNCD				(CDNS_DPTX_GLOBAL + 0x04)
-+
-+
-+#define to_mhdp_connector(x) container_of(x, struct cdns_mhdp_connector, base)
-+#define to_mhdp_bridge(x) container_of(x, struct cdns_mhdp_bridge, base)
-+#define mgr_to_mhdp(x) container_of(x, struct cdns_mhdp_device, mst_mgr)
-+
-+#define CDNS_MHDP_MAX_STREAMS   4
-+
-+enum pixel_format {
-+	PIXEL_FORMAT_RGB = 1,
-+	PIXEL_FORMAT_YCBCR_444 = 2,
-+	PIXEL_FORMAT_YCBCR_422 = 4,
-+	PIXEL_FORMAT_YCBCR_420 = 8,
-+	PIXEL_FORMAT_Y_ONLY = 16,
-+};
-+
-+
-+int cdns_mhdp_mst_init(struct cdns_mhdp_device *mhdp);
-+void cdns_mhdp_mst_deinit(struct cdns_mhdp_device *mhdp);
-+bool cdns_mhdp_mst_probe(struct cdns_mhdp_device *mhdp);
-+enum pixel_format cdns_mhdp_get_pxlfmt(u32 color_formats);
-+u32 cdns_mhdp_get_bpp(u32 bpc, u32 color_formats);
-+void cdns_mhdp_configure_video(struct drm_bridge *bridge);
-+void cdns_mhdp_mst_enable(struct drm_bridge *bridge);
-+void cdns_mhdp_mst_disable(struct drm_bridge *bridge);
-+void cdns_mhdp_enable(struct drm_bridge *bridge);
-+
-+#endif
---- a/drivers/gpu/drm/rockchip/Kconfig
-+++ b/drivers/gpu/drm/rockchip/Kconfig
-@@ -29,7 +29,9 @@ config ROCKCHIP_ANALOGIX_DP
- 
- config ROCKCHIP_CDN_DP
-         bool "Rockchip cdn DP"
--	depends on EXTCON=y || (EXTCON=m && DRM_ROCKCHIP=m)
-+	depends on DRM_ROCKCHIP
-+	select EXTCON
-+	select DRM_CDNS_MHDP
-         help
- 	  This selects support for Rockchip SoC specific extensions
- 	  for the cdn DP driver. If you want to enable Dp on
---- a/drivers/gpu/drm/rockchip/Makefile
-+++ b/drivers/gpu/drm/rockchip/Makefile
-@@ -8,7 +8,7 @@ rockchipdrm-y := rockchip_drm_drv.o rock
- rockchipdrm-$(CONFIG_DRM_FBDEV_EMULATION) += rockchip_drm_fbdev.o
- 
- rockchipdrm-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
--rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o
-+rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o
- rockchipdrm-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
- rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi-rockchip.o
- rockchipdrm-$(CONFIG_ROCKCHIP_INNO_HDMI) += inno_hdmi.o
---- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
-+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
-@@ -25,7 +25,7 @@
- #include "rockchip_drm_vop.h"
- 
- #define connector_to_dp(c) \
--		container_of(c, struct cdn_dp_device, mhdp.connector)
-+		container_of(c, struct cdn_dp_device, mhdp.connector.base)
- 
- #define encoder_to_dp(c) \
- 		container_of(c, struct cdn_dp_device, encoder)
-@@ -283,7 +283,7 @@ static int cdn_dp_connector_mode_valid(s
- {
- 	struct cdn_dp_device *dp = connector_to_dp(connector);
- 	struct drm_display_info *display_info =
--		&dp->mhdp.connector.display_info;
-+		&dp->mhdp.connector.base.display_info;
- 	u32 requested, actual, rate, sink_max, source_max = 0;
- 	u8 lanes, bpc;
- 
-@@ -379,7 +379,7 @@ static int cdn_dp_get_sink_capability(st
- 	}
- 
- 	kfree(dp->edid);
--	dp->edid = drm_do_get_edid(&dp->mhdp.connector,
-+	dp->edid = drm_do_get_edid(&dp->mhdp.connector.base,
- 				   cdns_mhdp_get_edid_block, &dp->mhdp);
- 	return 0;
- }
-@@ -485,8 +485,8 @@ static int cdn_dp_disable(struct cdn_dp_
- 	cdns_mhdp_set_firmware_active(&dp->mhdp, false);
- 	cdn_dp_clk_disable(dp);
- 	dp->active = false;
--	dp->mhdp.link.rate = 0;
--	dp->mhdp.link.num_lanes = 0;
-+	dp->mhdp.dp.link.rate = 0;
-+	dp->mhdp.dp.link.num_lanes = 0;
- 	if (!dp->connected) {
- 		kfree(dp->edid);
- 		dp->edid = NULL;
-@@ -551,7 +551,7 @@ static void cdn_dp_encoder_mode_set(stru
- {
- 	struct cdn_dp_device *dp = encoder_to_dp(encoder);
- 	struct drm_display_info *display_info =
--		&dp->mhdp.connector.display_info;
-+		&dp->mhdp.connector.base.display_info;
- 	struct video_info *video = &dp->mhdp.video_info;
- 
- 	switch (display_info->bpc) {
-@@ -579,7 +579,7 @@ static bool cdn_dp_check_link_status(str
- 	struct cdn_dp_port *port = cdn_dp_connected_port(dp);
- 	u8 sink_lanes = drm_dp_max_lane_count(dp->dpcd);
- 
--	if (!port || !dp->mhdp.link.rate || !dp->mhdp.link.num_lanes)
-+	if (!port || !dp->mhdp.dp.link.rate || !dp->mhdp.dp.link.num_lanes)
- 		return false;
- 
- 	if (cdns_mhdp_dpcd_read(&dp->mhdp, DP_LANE0_1_STATUS, link_status,
-@@ -808,7 +808,7 @@ static int cdn_dp_audio_hw_params(struct
- 
- 	ret = cdns_mhdp_audio_config(&dp->mhdp, &audio);
- 	if (!ret)
--		dp->audio_info = audio;
-+		dp->mhdp.audio_info = audio;
- 
- out:
- 	mutex_unlock(&dp->lock);
-@@ -824,9 +824,9 @@ static void cdn_dp_audio_shutdown(struct
- 	if (!dp->active)
- 		goto out;
- 
--	ret = cdns_mhdp_audio_stop(&dp->mhdp, &dp->audio_info);
-+	ret = cdns_mhdp_audio_stop(&dp->mhdp, &dp->mhdp.audio_info);
- 	if (!ret)
--		dp->audio_info.format = AFMT_UNUSED;
-+		dp->mhdp.audio_info.format = AFMT_UNUSED;
- out:
- 	mutex_unlock(&dp->lock);
- }
-@@ -855,8 +855,8 @@ static int cdn_dp_audio_get_eld(struct d
- {
- 	struct cdn_dp_device *dp = dev_get_drvdata(dev);
- 
--	memcpy(buf, dp->mhdp.connector.eld,
--	       min(sizeof(dp->mhdp.connector.eld), len));
-+	memcpy(buf, dp->mhdp.connector.base.eld,
-+	       min(sizeof(dp->mhdp.connector.base.eld), len));
- 
- 	return 0;
- }
-@@ -878,11 +878,11 @@ static int cdn_dp_audio_codec_init(struc
- 		.max_i2s_channels = 8,
- 	};
- 
--	dp->audio_pdev = platform_device_register_data(
--			 dev, HDMI_CODEC_DRV_NAME, PLATFORM_DEVID_AUTO,
--			 &codec_data, sizeof(codec_data));
-+	dp->mhdp.audio_pdev = platform_device_register_data(
-+			      dev, HDMI_CODEC_DRV_NAME, PLATFORM_DEVID_AUTO,
-+			      &codec_data, sizeof(codec_data));
- 
--	return PTR_ERR_OR_ZERO(dp->audio_pdev);
-+	return PTR_ERR_OR_ZERO(dp->mhdp.audio_pdev);
- }
- 
- static int cdn_dp_request_firmware(struct cdn_dp_device *dp)
-@@ -928,7 +928,7 @@ static void cdn_dp_pd_event_work(struct
- {
- 	struct cdn_dp_device *dp = container_of(work, struct cdn_dp_device,
- 						event_work);
--	struct drm_connector *connector = &dp->mhdp.connector;
-+	struct drm_connector *connector = &dp->mhdp.connector.base;
- 	enum drm_connector_status old_status;
- 	struct device *dev = dp->mhdp.dev;
- 
-@@ -966,8 +966,8 @@ static void cdn_dp_pd_event_work(struct
- 
- 	/* Enabled and connected with a sink, re-train if requested */
- 	} else if (!cdn_dp_check_link_status(dp)) {
--		unsigned int rate = dp->mhdp.link.rate;
--		unsigned int lanes = dp->mhdp.link.num_lanes;
-+		unsigned int rate = dp->mhdp.dp.link.rate;
-+		unsigned int lanes = dp->mhdp.dp.link.num_lanes;
- 		struct drm_display_mode *mode = &dp->mhdp.mode;
- 
- 		DRM_DEV_INFO(dev, "Connected with sink. Re-train link\n");
-@@ -980,8 +980,8 @@ static void cdn_dp_pd_event_work(struct
- 
- 		/* If training result is changed, update the video config */
- 		if (mode->clock &&
--		    (rate != dp->mhdp.link.rate ||
--		     lanes != dp->mhdp.link.num_lanes)) {
-+		    (rate != dp->mhdp.dp.link.rate ||
-+		     lanes != dp->mhdp.dp.link.num_lanes)) {
- 			ret = cdns_mhdp_config_video(&dp->mhdp);
- 			if (ret) {
- 				dp->connected = false;
-@@ -1054,7 +1054,7 @@ static int cdn_dp_bind(struct device *de
- 
- 	drm_encoder_helper_add(encoder, &cdn_dp_encoder_helper_funcs);
- 
--	connector = &dp->mhdp.connector;
-+	connector = &dp->mhdp.connector.base;
- 	connector->polled = DRM_CONNECTOR_POLL_HPD;
- 	connector->dpms = DRM_MODE_DPMS_OFF;
- 
-@@ -1105,7 +1105,7 @@ static void cdn_dp_unbind(struct device
- {
- 	struct cdn_dp_device *dp = dev_get_drvdata(dev);
- 	struct drm_encoder *encoder = &dp->encoder;
--	struct drm_connector *connector = &dp->mhdp.connector;
-+	struct drm_connector *connector = &dp->mhdp.connector.base;
- 
- 	cancel_work_sync(&dp->event_work);
- 	cdn_dp_encoder_disable(encoder);
-@@ -1209,7 +1209,7 @@ static int cdn_dp_remove(struct platform
- {
- 	struct cdn_dp_device *dp = platform_get_drvdata(pdev);
- 
--	platform_device_unregister(dp->audio_pdev);
-+	platform_device_unregister(dp->mhdp.audio_pdev);
- 	cdn_dp_suspend(dp->mhdp.dev);
- 	component_del(&pdev->dev, &cdn_dp_component_ops);
- 
---- a/drivers/gpu/drm/rockchip/cdn-dp-core.h
-+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.h
-@@ -7,12 +7,13 @@
- #ifndef _CDN_DP_CORE_H
- #define _CDN_DP_CORE_H
- 
-+#include <drm/bridge/cdns-mhdp-common.h>
-+#include <drm/drmP.h>
- #include <drm/drm_dp_helper.h>
- #include <drm/drm_panel.h>
- #include <drm/drm_probe_helper.h>
- 
- #include "rockchip_drm_drv.h"
--#include "cdn-dp-reg.h"
- 
- #define MAX_PHY		2
- 
-@@ -37,7 +38,6 @@ struct cdn_dp_device {
- 	struct cdns_mhdp_device mhdp;
- 	struct drm_device *drm_dev;
- 	struct drm_encoder encoder;
--	struct platform_device *audio_pdev;
- 	struct work_struct event_work;
- 	struct edid *edid;
- 
-@@ -56,7 +56,6 @@ struct cdn_dp_device {
- 	struct reset_control *dptx_rst;
- 	struct reset_control *apb_rst;
- 	struct reset_control *core_rst;
--	struct audio_info audio_info;
- 	struct cdn_dp_port *port[MAX_PHY];
- 	u8 ports;
- 	u8 lanes;
---- a/drivers/gpu/drm/rockchip/cdn-dp-reg.c
-+++ /dev/null
-@@ -1,968 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-only
--/*
-- * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
-- * Author: Chris Zhong <zyw@rock-chips.com>
-- */
--
--#include <linux/clk.h>
--#include <linux/device.h>
--#include <linux/delay.h>
--#include <linux/io.h>
--#include <linux/iopoll.h>
--#include <linux/reset.h>
--
--#include "cdn-dp-core.h"
--#include "cdn-dp-reg.h"
--
--#define CDNS_DP_SPDIF_CLK		200000000
--#define FW_ALIVE_TIMEOUT_US		1000000
--#define MAILBOX_RETRY_US		1000
--#define MAILBOX_TIMEOUT_US		5000000
--#define LINK_TRAINING_RETRY_MS		20
--#define LINK_TRAINING_TIMEOUT_MS	500
--
--void cdns_mhdp_set_fw_clk(struct cdns_mhdp_device *mhdp, unsigned long clk)
--{
--	writel(clk / 1000000, mhdp->regs + SW_CLK_H);
--}
--
--void cdns_mhdp_clock_reset(struct cdns_mhdp_device *mhdp)
--{
--	u32 val;
--
--	val = DPTX_FRMR_DATA_CLK_RSTN_EN |
--	      DPTX_FRMR_DATA_CLK_EN |
--	      DPTX_PHY_DATA_RSTN_EN |
--	      DPTX_PHY_DATA_CLK_EN |
--	      DPTX_PHY_CHAR_RSTN_EN |
--	      DPTX_PHY_CHAR_CLK_EN |
--	      SOURCE_AUX_SYS_CLK_RSTN_EN |
--	      SOURCE_AUX_SYS_CLK_EN |
--	      DPTX_SYS_CLK_RSTN_EN |
--	      DPTX_SYS_CLK_EN |
--	      CFG_DPTX_VIF_CLK_RSTN_EN |
--	      CFG_DPTX_VIF_CLK_EN;
--	writel(val, mhdp->regs + SOURCE_DPTX_CAR);
--
--	val = SOURCE_PHY_RSTN_EN | SOURCE_PHY_CLK_EN;
--	writel(val, mhdp->regs + SOURCE_PHY_CAR);
--
--	val = SOURCE_PKT_SYS_RSTN_EN |
--	      SOURCE_PKT_SYS_CLK_EN |
--	      SOURCE_PKT_DATA_RSTN_EN |
--	      SOURCE_PKT_DATA_CLK_EN;
--	writel(val, mhdp->regs + SOURCE_PKT_CAR);
--
--	val = SPDIF_CDR_CLK_RSTN_EN |
--	      SPDIF_CDR_CLK_EN |
--	      SOURCE_AIF_SYS_RSTN_EN |
--	      SOURCE_AIF_SYS_CLK_EN |
--	      SOURCE_AIF_CLK_RSTN_EN |
--	      SOURCE_AIF_CLK_EN;
--	writel(val, mhdp->regs + SOURCE_AIF_CAR);
--
--	val = SOURCE_CIPHER_SYSTEM_CLK_RSTN_EN |
--	      SOURCE_CIPHER_SYS_CLK_EN |
--	      SOURCE_CIPHER_CHAR_CLK_RSTN_EN |
--	      SOURCE_CIPHER_CHAR_CLK_EN;
--	writel(val, mhdp->regs + SOURCE_CIPHER_CAR);
--
--	val = SOURCE_CRYPTO_SYS_CLK_RSTN_EN |
--	      SOURCE_CRYPTO_SYS_CLK_EN;
--	writel(val, mhdp->regs + SOURCE_CRYPTO_CAR);
--
--	/* enable Mailbox and PIF interrupt */
--	writel(0, mhdp->regs + APB_INT_MASK);
--}
--
--static int cdns_mhdp_mailbox_read(struct cdns_mhdp_device *mhdp)
--{
--	int val, ret;
--
--	ret = readx_poll_timeout(readl, mhdp->regs + MAILBOX_EMPTY_ADDR,
--				 val, !val, MAILBOX_RETRY_US,
--				 MAILBOX_TIMEOUT_US);
--	if (ret < 0)
--		return ret;
--
--	return readl(mhdp->regs + MAILBOX0_RD_DATA) & 0xff;
--}
--
--static int cdp_dp_mailbox_write(struct cdns_mhdp_device *mhdp, u8 val)
--{
--	int ret, full;
--
--	ret = readx_poll_timeout(readl, mhdp->regs + MAILBOX_FULL_ADDR,
--				 full, !full, MAILBOX_RETRY_US,
--				 MAILBOX_TIMEOUT_US);
--	if (ret < 0)
--		return ret;
--
--	writel(val, mhdp->regs + MAILBOX0_WR_DATA);
--
--	return 0;
--}
--
--static int cdns_mhdp_mailbox_validate_receive(struct cdns_mhdp_device *mhdp,
--					      u8 module_id, u8 opcode,
--					      u16 req_size)
--{
--	u32 mbox_size, i;
--	u8 header[4];
--	int ret;
--
--	/* read the header of the message */
--	for (i = 0; i < 4; i++) {
--		ret = cdns_mhdp_mailbox_read(mhdp);
--		if (ret < 0)
--			return ret;
--
--		header[i] = ret;
--	}
--
--	mbox_size = (header[2] << 8) | header[3];
--
--	if (opcode != header[0] || module_id != header[1] ||
--	    req_size != mbox_size) {
--		/*
--		 * If the message in mailbox is not what we want, we need to
--		 * clear the mailbox by reading its contents.
--		 */
--		for (i = 0; i < mbox_size; i++)
--			if (cdns_mhdp_mailbox_read(mhdp) < 0)
--				break;
--
--		return -EINVAL;
--	}
--
--	return 0;
--}
--
--static int cdns_mhdp_mailbox_read_receive(struct cdns_mhdp_device *mhdp,
--					  u8 *buff, u16 buff_size)
--{
--	u32 i;
--	int ret;
--
--	for (i = 0; i < buff_size; i++) {
--		ret = cdns_mhdp_mailbox_read(mhdp);
--		if (ret < 0)
--			return ret;
--
--		buff[i] = ret;
--	}
--
--	return 0;
--}
--
--static int cdns_mhdp_mailbox_send(struct cdns_mhdp_device *mhdp, u8 module_id,
--				  u8 opcode, u16 size, u8 *message)
--{
--	u8 header[4];
--	int ret, i;
--
--	header[0] = opcode;
--	header[1] = module_id;
--	header[2] = (size >> 8) & 0xff;
--	header[3] = size & 0xff;
--
--	for (i = 0; i < 4; i++) {
--		ret = cdp_dp_mailbox_write(mhdp, header[i]);
--		if (ret)
--			return ret;
--	}
--
--	for (i = 0; i < size; i++) {
--		ret = cdp_dp_mailbox_write(mhdp, message[i]);
--		if (ret)
--			return ret;
--	}
--
--	return 0;
--}
--
--static int cdns_mhdp_reg_write(struct cdns_mhdp_device *mhdp, u16 addr, u32 val)
--{
--	u8 msg[6];
--
--	msg[0] = (addr >> 8) & 0xff;
--	msg[1] = addr & 0xff;
--	msg[2] = (val >> 24) & 0xff;
--	msg[3] = (val >> 16) & 0xff;
--	msg[4] = (val >> 8) & 0xff;
--	msg[5] = val & 0xff;
--	return cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
--				      DPTX_WRITE_REGISTER, sizeof(msg), msg);
--}
--
--static int cdns_mhdp_reg_write_bit(struct cdns_mhdp_device *mhdp, u16 addr,
--				   u8 start_bit, u8 bits_no, u32 val)
--{
--	u8 field[8];
--
--	field[0] = (addr >> 8) & 0xff;
--	field[1] = addr & 0xff;
--	field[2] = start_bit;
--	field[3] = bits_no;
--	field[4] = (val >> 24) & 0xff;
--	field[5] = (val >> 16) & 0xff;
--	field[6] = (val >> 8) & 0xff;
--	field[7] = val & 0xff;
--
--	return cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
--				      DPTX_WRITE_FIELD, sizeof(field), field);
--}
--
--int cdns_mhdp_dpcd_read(struct cdns_mhdp_device *mhdp,
--			u32 addr, u8 *data, u16 len)
--{
--	u8 msg[5], reg[5];
--	int ret;
--
--	msg[0] = (len >> 8) & 0xff;
--	msg[1] = len & 0xff;
--	msg[2] = (addr >> 16) & 0xff;
--	msg[3] = (addr >> 8) & 0xff;
--	msg[4] = addr & 0xff;
--	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
--				     DPTX_READ_DPCD, sizeof(msg), msg);
--	if (ret)
--		goto err_dpcd_read;
--
--	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_DP_TX,
--						 DPTX_READ_DPCD,
--						 sizeof(reg) + len);
--	if (ret)
--		goto err_dpcd_read;
--
--	ret = cdns_mhdp_mailbox_read_receive(mhdp, reg, sizeof(reg));
--	if (ret)
--		goto err_dpcd_read;
--
--	ret = cdns_mhdp_mailbox_read_receive(mhdp, data, len);
--
--err_dpcd_read:
--	return ret;
--}
--
--int cdns_mhdp_dpcd_write(struct cdns_mhdp_device *mhdp, u32 addr, u8 value)
--{
--	u8 msg[6], reg[5];
--	int ret;
--
--	msg[0] = 0;
--	msg[1] = 1;
--	msg[2] = (addr >> 16) & 0xff;
--	msg[3] = (addr >> 8) & 0xff;
--	msg[4] = addr & 0xff;
--	msg[5] = value;
--	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
--				     DPTX_WRITE_DPCD, sizeof(msg), msg);
--	if (ret)
--		goto err_dpcd_write;
--
--	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_DP_TX,
--						 DPTX_WRITE_DPCD, sizeof(reg));
--	if (ret)
--		goto err_dpcd_write;
--
--	ret = cdns_mhdp_mailbox_read_receive(mhdp, reg, sizeof(reg));
--	if (ret)
--		goto err_dpcd_write;
--
--	if (addr != (reg[2] << 16 | reg[3] << 8 | reg[4]))
--		ret = -EINVAL;
--
--err_dpcd_write:
--	if (ret)
--		DRM_DEV_ERROR(mhdp->dev, "dpcd write failed: %d\n", ret);
--	return ret;
--}
--
--int cdns_mhdp_load_firmware(struct cdns_mhdp_device *mhdp, const u32 *i_mem,
--			    u32 i_size, const u32 *d_mem, u32 d_size)
--{
--	u32 reg;
--	int i, ret;
--
--	/* reset ucpu before load firmware*/
--	writel(APB_IRAM_PATH | APB_DRAM_PATH | APB_XT_RESET,
--	       mhdp->regs + APB_CTRL);
--
--	for (i = 0; i < i_size; i += 4)
--		writel(*i_mem++, mhdp->regs + ADDR_IMEM + i);
--
--	for (i = 0; i < d_size; i += 4)
--		writel(*d_mem++, mhdp->regs + ADDR_DMEM + i);
--
--	/* un-reset ucpu */
--	writel(0, mhdp->regs + APB_CTRL);
--
--	/* check the keep alive register to make sure fw working */
--	ret = readx_poll_timeout(readl, mhdp->regs + KEEP_ALIVE,
--				 reg, reg, 2000, FW_ALIVE_TIMEOUT_US);
--	if (ret < 0) {
--		DRM_DEV_ERROR(mhdp->dev, "failed to loaded the FW reg = %x\n",
--			      reg);
--		return -EINVAL;
--	}
--
--	reg = readl(mhdp->regs + VER_L) & 0xff;
--	mhdp->fw_version = reg;
--	reg = readl(mhdp->regs + VER_H) & 0xff;
--	mhdp->fw_version |= reg << 8;
--	reg = readl(mhdp->regs + VER_LIB_L_ADDR) & 0xff;
--	mhdp->fw_version |= reg << 16;
--	reg = readl(mhdp->regs + VER_LIB_H_ADDR) & 0xff;
--	mhdp->fw_version |= reg << 24;
--
--	DRM_DEV_DEBUG(mhdp->dev, "firmware version: %x\n", mhdp->fw_version);
--
--	return 0;
--}
--
--int cdns_mhdp_set_firmware_active(struct cdns_mhdp_device *mhdp, bool enable)
--{
--	u8 msg[5];
--	int ret, i;
--
--	msg[0] = GENERAL_MAIN_CONTROL;
--	msg[1] = MB_MODULE_ID_GENERAL;
--	msg[2] = 0;
--	msg[3] = 1;
--	msg[4] = enable ? FW_ACTIVE : FW_STANDBY;
--
--	for (i = 0; i < sizeof(msg); i++) {
--		ret = cdp_dp_mailbox_write(mhdp, msg[i]);
--		if (ret)
--			goto err_set_firmware_active;
--	}
--
--	/* read the firmware state */
--	for (i = 0; i < sizeof(msg); i++)  {
--		ret = cdns_mhdp_mailbox_read(mhdp);
--		if (ret < 0)
--			goto err_set_firmware_active;
--
--		msg[i] = ret;
--	}
--
--	ret = 0;
--
--err_set_firmware_active:
--	if (ret < 0)
--		DRM_DEV_ERROR(mhdp->dev, "set firmware active failed\n");
--	return ret;
--}
--
--int cdns_mhdp_set_host_cap(struct cdns_mhdp_device *mhdp, u8 lanes, bool flip)
--{
--	u8 msg[8];
--	int ret;
--
--	msg[0] = CDNS_DP_MAX_LINK_RATE;
--	msg[1] = lanes | SCRAMBLER_EN;
--	msg[2] = VOLTAGE_LEVEL_2;
--	msg[3] = PRE_EMPHASIS_LEVEL_3;
--	msg[4] = PTS1 | PTS2 | PTS3 | PTS4;
--	msg[5] = FAST_LT_NOT_SUPPORT;
--	msg[6] = flip ? LANE_MAPPING_FLIPPED : LANE_MAPPING_NORMAL;
--	msg[7] = ENHANCED;
--
--	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
--				     DPTX_SET_HOST_CAPABILITIES,
--				     sizeof(msg), msg);
--	if (ret)
--		goto err_set_host_cap;
--
--	ret = cdns_mhdp_reg_write(mhdp, DP_AUX_SWAP_INVERSION_CONTROL,
--				  AUX_HOST_INVERT);
--
--err_set_host_cap:
--	if (ret)
--		DRM_DEV_ERROR(mhdp->dev, "set host cap failed: %d\n", ret);
--	return ret;
--}
--
--int cdns_mhdp_event_config(struct cdns_mhdp_device *mhdp)
--{
--	u8 msg[5];
--	int ret;
--
--	memset(msg, 0, sizeof(msg));
--
--	msg[0] = DPTX_EVENT_ENABLE_HPD | DPTX_EVENT_ENABLE_TRAINING;
--
--	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
--				     DPTX_ENABLE_EVENT, sizeof(msg), msg);
--	if (ret)
--		DRM_DEV_ERROR(mhdp->dev, "set event config failed: %d\n", ret);
--
--	return ret;
--}
--
--u32 cdns_mhdp_get_event(struct cdns_mhdp_device *mhdp)
--{
--	return readl(mhdp->regs + SW_EVENTS0);
--}
--
--int cdns_mhdp_get_hpd_status(struct cdns_mhdp_device *mhdp)
--{
--	u8 status;
--	int ret;
--
--	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
--				     DPTX_HPD_STATE, 0, NULL);
--	if (ret)
--		goto err_get_hpd;
--
--	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_DP_TX,
--						 DPTX_HPD_STATE,
--						 sizeof(status));
--	if (ret)
--		goto err_get_hpd;
--
--	ret = cdns_mhdp_mailbox_read_receive(mhdp, &status, sizeof(status));
--	if (ret)
--		goto err_get_hpd;
--
--	return status;
--
--err_get_hpd:
--	DRM_DEV_ERROR(mhdp->dev, "get hpd status failed: %d\n", ret);
--	return ret;
--}
--
--int cdns_mhdp_get_edid_block(void *data, u8 *edid,
--			  unsigned int block, size_t length)
--{
--	struct cdns_mhdp_device *mhdp = data;
--	u8 msg[2], reg[2], i;
--	int ret;
--
--	for (i = 0; i < 4; i++) {
--		msg[0] = block / 2;
--		msg[1] = block % 2;
--
--		ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
--					     DPTX_GET_EDID, sizeof(msg), msg);
--		if (ret)
--			continue;
--
--		ret = cdns_mhdp_mailbox_validate_receive(mhdp,
--							 MB_MODULE_ID_DP_TX,
--							 DPTX_GET_EDID,
--							 sizeof(reg) + length);
--		if (ret)
--			continue;
--
--		ret = cdns_mhdp_mailbox_read_receive(mhdp, reg, sizeof(reg));
--		if (ret)
--			continue;
--
--		ret = cdns_mhdp_mailbox_read_receive(mhdp, edid, length);
--		if (ret)
--			continue;
--
--		if (reg[0] == length && reg[1] == block / 2)
--			break;
--	}
--
--	if (ret)
--		DRM_DEV_ERROR(mhdp->dev, "get block[%d] edid failed: %d\n",
--			      block, ret);
--
--	return ret;
--}
--
--static int cdns_mhdp_training_start(struct cdns_mhdp_device *mhdp)
--{
--	unsigned long timeout;
--	u8 msg, event[2];
--	int ret;
--
--	msg = LINK_TRAINING_RUN;
--
--	/* start training */
--	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
--				     DPTX_TRAINING_CONTROL, sizeof(msg), &msg);
--	if (ret)
--		goto err_training_start;
--
--	timeout = jiffies + msecs_to_jiffies(LINK_TRAINING_TIMEOUT_MS);
--	while (time_before(jiffies, timeout)) {
--		msleep(LINK_TRAINING_RETRY_MS);
--		ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
--					     DPTX_READ_EVENT, 0, NULL);
--		if (ret)
--			goto err_training_start;
--
--		ret = cdns_mhdp_mailbox_validate_receive(mhdp,
--							 MB_MODULE_ID_DP_TX,
--							 DPTX_READ_EVENT,
--							 sizeof(event));
--		if (ret)
--			goto err_training_start;
--
--		ret = cdns_mhdp_mailbox_read_receive(mhdp, event,
--						     sizeof(event));
--		if (ret)
--			goto err_training_start;
--
--		if (event[1] & EQ_PHASE_FINISHED)
--			return 0;
--	}
--
--	ret = -ETIMEDOUT;
--
--err_training_start:
--	DRM_DEV_ERROR(mhdp->dev, "training failed: %d\n", ret);
--	return ret;
--}
--
--static int cdns_mhdp_get_training_status(struct cdns_mhdp_device *mhdp)
--{
--	u8 status[10];
--	int ret;
--
--	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX, DPTX_READ_LINK_STAT,
--				  0, NULL);
--	if (ret)
--		goto err_get_training_status;
--
--	ret = cdns_mhdp_mailbox_validate_receive(mhdp, MB_MODULE_ID_DP_TX,
--					      DPTX_READ_LINK_STAT,
--					      sizeof(status));
--	if (ret)
--		goto err_get_training_status;
--
--	ret = cdns_mhdp_mailbox_read_receive(mhdp, status, sizeof(status));
--	if (ret)
--		goto err_get_training_status;
--
--	mhdp->link.rate = drm_dp_bw_code_to_link_rate(status[0]);
--	mhdp->link.num_lanes = status[1];
--
--err_get_training_status:
--	if (ret)
--		DRM_DEV_ERROR(mhdp->dev, "get training status failed: %d\n", ret);
--	return ret;
--}
--
--int cdns_mhdp_train_link(struct cdns_mhdp_device *mhdp)
--{
--	int ret;
--
--	ret = cdns_mhdp_training_start(mhdp);
--	if (ret) {
--		DRM_DEV_ERROR(mhdp->dev, "Failed to start training %d\n", ret);
--		return ret;
--	}
--
--	ret = cdns_mhdp_get_training_status(mhdp);
--	if (ret) {
--		DRM_DEV_ERROR(mhdp->dev, "Failed to get training stat %d\n", ret);
--		return ret;
--	}
--
--	DRM_DEV_DEBUG_KMS(mhdp->dev, "rate:0x%x, lanes:%d\n", mhdp->link.rate,
--			  mhdp->link.num_lanes);
--	return ret;
--}
--
--int cdns_mhdp_set_video_status(struct cdns_mhdp_device *mhdp, int active)
--{
--	u8 msg;
--	int ret;
--
--	msg = !!active;
--
--	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX, DPTX_SET_VIDEO,
--				  sizeof(msg), &msg);
--	if (ret)
--		DRM_DEV_ERROR(mhdp->dev, "set video status failed: %d\n", ret);
--
--	return ret;
--}
--
--static int cdns_mhdp_get_msa_misc(struct video_info *video,
--			       struct drm_display_mode *mode)
--{
--	u32 msa_misc;
--	u8 val[2] = {0};
--
--	switch (video->color_fmt) {
--	case PXL_RGB:
--	case Y_ONLY:
--		val[0] = 0;
--		break;
--	/* set YUV default color space conversion to BT601 */
--	case YCBCR_4_4_4:
--		val[0] = 6 + BT_601 * 8;
--		break;
--	case YCBCR_4_2_2:
--		val[0] = 5 + BT_601 * 8;
--		break;
--	case YCBCR_4_2_0:
--		val[0] = 5;
--		break;
--	};
--
--	switch (video->color_depth) {
--	case 6:
--		val[1] = 0;
--		break;
--	case 8:
--		val[1] = 1;
--		break;
--	case 10:
--		val[1] = 2;
--		break;
--	case 12:
--		val[1] = 3;
--		break;
--	case 16:
--		val[1] = 4;
--		break;
--	};
--
--	msa_misc = 2 * val[0] + 32 * val[1] +
--		   ((video->color_fmt == Y_ONLY) ? (1 << 14) : 0);
--
--	return msa_misc;
--}
--
--int cdns_mhdp_config_video(struct cdns_mhdp_device *mhdp)
--{
--	struct video_info *video = &mhdp->video_info;
--	struct drm_display_mode *mode = &mhdp->mode;
--	u64 symbol;
--	u32 val, link_rate, rem;
--	u8 bit_per_pix, tu_size_reg = TU_SIZE;
--	int ret;
--
--	bit_per_pix = (video->color_fmt == YCBCR_4_2_2) ?
--		      (video->color_depth * 2) : (video->color_depth * 3);
--
--	link_rate = mhdp->link.rate / 1000;
--
--	ret = cdns_mhdp_reg_write(mhdp, BND_HSYNC2VSYNC, VIF_BYPASS_INTERLACE);
--	if (ret)
--		goto err_config_video;
--
--	ret = cdns_mhdp_reg_write(mhdp, HSYNC2VSYNC_POL_CTRL, 0);
--	if (ret)
--		goto err_config_video;
--
--	/*
--	 * get a best tu_size and valid symbol:
--	 * 1. chose Lclk freq(162Mhz, 270Mhz, 540Mhz), set TU to 32
--	 * 2. calculate VS(valid symbol) = TU * Pclk * Bpp / (Lclk * Lanes)
--	 * 3. if VS > *.85 or VS < *.1 or VS < 2 or TU < VS + 4, then set
--	 *    TU += 2 and repeat 2nd step.
--	 */
--	do {
--		tu_size_reg += 2;
--		symbol = tu_size_reg * mode->clock * bit_per_pix;
--		do_div(symbol, mhdp->link.num_lanes * link_rate * 8);
--		rem = do_div(symbol, 1000);
--		if (tu_size_reg > 64) {
--			ret = -EINVAL;
--			DRM_DEV_ERROR(mhdp->dev,
--				      "tu error, clk:%d, lanes:%d, rate:%d\n",
--				      mode->clock, mhdp->link.num_lanes,
--				      link_rate);
--			goto err_config_video;
--		}
--	} while ((symbol <= 1) || (tu_size_reg - symbol < 4) ||
--		 (rem > 850) || (rem < 100));
--
--	val = symbol + (tu_size_reg << 8);
--	val |= TU_CNT_RST_EN;
--	ret = cdns_mhdp_reg_write(mhdp, DP_FRAMER_TU, val);
--	if (ret)
--		goto err_config_video;
--
--	/* set the FIFO Buffer size */
--	val = div_u64(mode->clock * (symbol + 1), 1000) + link_rate;
--	val /= (mhdp->link.num_lanes * link_rate);
--	val = div_u64(8 * (symbol + 1), bit_per_pix) - val;
--	val += 2;
--	ret = cdns_mhdp_reg_write(mhdp, DP_VC_TABLE(15), val);
--
--	switch (video->color_depth) {
--	case 6:
--		val = BCS_6;
--		break;
--	case 8:
--		val = BCS_8;
--		break;
--	case 10:
--		val = BCS_10;
--		break;
--	case 12:
--		val = BCS_12;
--		break;
--	case 16:
--		val = BCS_16;
--		break;
--	};
--
--	val += video->color_fmt << 8;
--	ret = cdns_mhdp_reg_write(mhdp, DP_FRAMER_PXL_REPR, val);
--	if (ret)
--		goto err_config_video;
--
--	val = video->h_sync_polarity ? DP_FRAMER_SP_HSP : 0;
--	val |= video->v_sync_polarity ? DP_FRAMER_SP_VSP : 0;
--	ret = cdns_mhdp_reg_write(mhdp, DP_FRAMER_SP, val);
--	if (ret)
--		goto err_config_video;
--
--	val = (mode->hsync_start - mode->hdisplay) << 16;
--	val |= mode->htotal - mode->hsync_end;
--	ret = cdns_mhdp_reg_write(mhdp, DP_FRONT_BACK_PORCH, val);
--	if (ret)
--		goto err_config_video;
--
--	val = mode->hdisplay * bit_per_pix / 8;
--	ret = cdns_mhdp_reg_write(mhdp, DP_BYTE_COUNT, val);
--	if (ret)
--		goto err_config_video;
--
--	val = mode->htotal | ((mode->htotal - mode->hsync_start) << 16);
--	ret = cdns_mhdp_reg_write(mhdp, MSA_HORIZONTAL_0, val);
--	if (ret)
--		goto err_config_video;
--
--	val = mode->hsync_end - mode->hsync_start;
--	val |= (mode->hdisplay << 16) | (video->h_sync_polarity << 15);
--	ret = cdns_mhdp_reg_write(mhdp, MSA_HORIZONTAL_1, val);
--	if (ret)
--		goto err_config_video;
--
--	val = mode->vtotal;
--	val |= (mode->vtotal - mode->vsync_start) << 16;
--	ret = cdns_mhdp_reg_write(mhdp, MSA_VERTICAL_0, val);
--	if (ret)
--		goto err_config_video;
--
--	val = mode->vsync_end - mode->vsync_start;
--	val |= (mode->vdisplay << 16) | (video->v_sync_polarity << 15);
--	ret = cdns_mhdp_reg_write(mhdp, MSA_VERTICAL_1, val);
--	if (ret)
--		goto err_config_video;
--
--	val = cdns_mhdp_get_msa_misc(video, mode);
--	ret = cdns_mhdp_reg_write(mhdp, MSA_MISC, val);
--	if (ret)
--		goto err_config_video;
--
--	ret = cdns_mhdp_reg_write(mhdp, STREAM_CONFIG, 1);
--	if (ret)
--		goto err_config_video;
--
--	val = mode->hsync_end - mode->hsync_start;
--	val |= mode->hdisplay << 16;
--	ret = cdns_mhdp_reg_write(mhdp, DP_HORIZONTAL, val);
--	if (ret)
--		goto err_config_video;
--
--	val = mode->vdisplay;
--	val |= (mode->vtotal - mode->vsync_start) << 16;
--	ret = cdns_mhdp_reg_write(mhdp, DP_VERTICAL_0, val);
--	if (ret)
--		goto err_config_video;
--
--	val = mode->vtotal;
--	ret = cdns_mhdp_reg_write(mhdp, DP_VERTICAL_1, val);
--	if (ret)
--		goto err_config_video;
--
--	ret = cdns_mhdp_reg_write_bit(mhdp, DP_VB_ID, 2, 1, 0);
--
--err_config_video:
--	if (ret)
--		DRM_DEV_ERROR(mhdp->dev, "config video failed: %d\n", ret);
--	return ret;
--}
--
--int cdns_mhdp_audio_stop(struct cdns_mhdp_device *mhdp,
--			 struct audio_info *audio)
--{
--	int ret;
--
--	ret = cdns_mhdp_reg_write(mhdp, AUDIO_PACK_CONTROL, 0);
--	if (ret) {
--		DRM_DEV_ERROR(mhdp->dev, "audio stop failed: %d\n", ret);
--		return ret;
--	}
--
--	writel(0, mhdp->regs + SPDIF_CTRL_ADDR);
--
--	/* clearn the audio config and reset */
--	writel(0, mhdp->regs + AUDIO_SRC_CNTL);
--	writel(0, mhdp->regs + AUDIO_SRC_CNFG);
--	writel(AUDIO_SW_RST, mhdp->regs + AUDIO_SRC_CNTL);
--	writel(0, mhdp->regs + AUDIO_SRC_CNTL);
--
--	/* reset smpl2pckt component  */
--	writel(0, mhdp->regs + SMPL2PKT_CNTL);
--	writel(AUDIO_SW_RST, mhdp->regs + SMPL2PKT_CNTL);
--	writel(0, mhdp->regs + SMPL2PKT_CNTL);
--
--	/* reset FIFO */
--	writel(AUDIO_SW_RST, mhdp->regs + FIFO_CNTL);
--	writel(0, mhdp->regs + FIFO_CNTL);
--
--	if (audio->format == AFMT_SPDIF)
--		clk_disable_unprepare(mhdp->spdif_clk);
--
--	return 0;
--}
--
--int cdns_mhdp_audio_mute(struct cdns_mhdp_device *mhdp, bool enable)
--{
--	int ret;
--
--	ret = cdns_mhdp_reg_write_bit(mhdp, DP_VB_ID, 4, 1, enable);
--	if (ret)
--		DRM_DEV_ERROR(mhdp->dev, "audio mute failed: %d\n", ret);
--
--	return ret;
--}
--
--static void cdns_mhdp_audio_config_i2s(struct cdns_mhdp_device *mhdp,
--				       struct audio_info *audio)
--{
--	int sub_pckt_num = 1, i2s_port_en_val = 0xf, i;
--	u32 val;
--
--	if (audio->channels == 2) {
--		if (mhdp->link.num_lanes == 1)
--			sub_pckt_num = 2;
--		else
--			sub_pckt_num = 4;
--
--		i2s_port_en_val = 1;
--	} else if (audio->channels == 4) {
--		i2s_port_en_val = 3;
--	}
--
--	writel(0x0, mhdp->regs + SPDIF_CTRL_ADDR);
--
--	writel(SYNC_WR_TO_CH_ZERO, mhdp->regs + FIFO_CNTL);
--
--	val = MAX_NUM_CH(audio->channels);
--	val |= NUM_OF_I2S_PORTS(audio->channels);
--	val |= AUDIO_TYPE_LPCM;
--	val |= CFG_SUB_PCKT_NUM(sub_pckt_num);
--	writel(val, mhdp->regs + SMPL2PKT_CNFG);
--
--	if (audio->sample_width == 16)
--		val = 0;
--	else if (audio->sample_width == 24)
--		val = 1 << 9;
--	else
--		val = 2 << 9;
--
--	val |= AUDIO_CH_NUM(audio->channels);
--	val |= I2S_DEC_PORT_EN(i2s_port_en_val);
--	val |= TRANS_SMPL_WIDTH_32;
--	writel(val, mhdp->regs + AUDIO_SRC_CNFG);
--
--	for (i = 0; i < (audio->channels + 1) / 2; i++) {
--		if (audio->sample_width == 16)
--			val = (0x02 << 8) | (0x02 << 20);
--		else if (audio->sample_width == 24)
--			val = (0x0b << 8) | (0x0b << 20);
--
--		val |= ((2 * i) << 4) | ((2 * i + 1) << 16);
--		writel(val, mhdp->regs + STTS_BIT_CH(i));
--	}
--
--	switch (audio->sample_rate) {
--	case 32000:
--		val = SAMPLING_FREQ(3) |
--		      ORIGINAL_SAMP_FREQ(0xc);
--		break;
--	case 44100:
--		val = SAMPLING_FREQ(0) |
--		      ORIGINAL_SAMP_FREQ(0xf);
--		break;
--	case 48000:
--		val = SAMPLING_FREQ(2) |
--		      ORIGINAL_SAMP_FREQ(0xd);
--		break;
--	case 88200:
--		val = SAMPLING_FREQ(8) |
--		      ORIGINAL_SAMP_FREQ(0x7);
--		break;
--	case 96000:
--		val = SAMPLING_FREQ(0xa) |
--		      ORIGINAL_SAMP_FREQ(5);
--		break;
--	case 176400:
--		val = SAMPLING_FREQ(0xc) |
--		      ORIGINAL_SAMP_FREQ(3);
--		break;
--	case 192000:
--		val = SAMPLING_FREQ(0xe) |
--		      ORIGINAL_SAMP_FREQ(1);
--		break;
--	}
--	val |= 4;
--	writel(val, mhdp->regs + COM_CH_STTS_BITS);
--
--	writel(SMPL2PKT_EN, mhdp->regs + SMPL2PKT_CNTL);
--	writel(I2S_DEC_START, mhdp->regs + AUDIO_SRC_CNTL);
--}
--
--static void cdns_mhdp_audio_config_spdif(struct cdns_mhdp_device *mhdp)
--{
--	u32 val;
--
--	writel(SYNC_WR_TO_CH_ZERO, mhdp->regs + FIFO_CNTL);
--
--	val = MAX_NUM_CH(2) | AUDIO_TYPE_LPCM | CFG_SUB_PCKT_NUM(4);
--	writel(val, mhdp->regs + SMPL2PKT_CNFG);
--	writel(SMPL2PKT_EN, mhdp->regs + SMPL2PKT_CNTL);
--
--	val = SPDIF_ENABLE | SPDIF_AVG_SEL | SPDIF_JITTER_BYPASS;
--	writel(val, mhdp->regs + SPDIF_CTRL_ADDR);
--
--	clk_prepare_enable(mhdp->spdif_clk);
--	clk_set_rate(mhdp->spdif_clk, CDNS_DP_SPDIF_CLK);
--}
--
--int cdns_mhdp_audio_config(struct cdns_mhdp_device *mhdp,
--			   struct audio_info *audio)
--{
--	int ret;
--
--	/* reset the spdif clk before config */
--	if (audio->format == AFMT_SPDIF) {
--		reset_control_assert(mhdp->spdif_rst);
--		reset_control_deassert(mhdp->spdif_rst);
--	}
--
--	ret = cdns_mhdp_reg_write(mhdp, CM_LANE_CTRL, LANE_REF_CYC);
--	if (ret)
--		goto err_audio_config;
--
--	ret = cdns_mhdp_reg_write(mhdp, CM_CTRL, 0);
--	if (ret)
--		goto err_audio_config;
--
--	if (audio->format == AFMT_I2S)
--		cdns_mhdp_audio_config_i2s(mhdp, audio);
--	else if (audio->format == AFMT_SPDIF)
--		cdns_mhdp_audio_config_spdif(mhdp);
--
--	ret = cdns_mhdp_reg_write(mhdp, AUDIO_PACK_CONTROL, AUDIO_PACK_EN);
--
--err_audio_config:
--	if (ret)
--		DRM_DEV_ERROR(mhdp->dev, "audio config failed: %d\n", ret);
--	return ret;
--}
---- a/drivers/gpu/drm/rockchip/cdn-dp-reg.h
-+++ /dev/null
-@@ -1,546 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0-only */
--/*
-- * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
-- * Author: Chris Zhong <zyw@rock-chips.com>
-- */
--
--#ifndef _CDN_DP_REG_H
--#define _CDN_DP_REG_H
--
--#include <linux/bitops.h>
--
--#define ADDR_IMEM		0x10000
--#define ADDR_DMEM		0x20000
--
--/* APB CFG addr */
--#define APB_CTRL			0
--#define XT_INT_CTRL			0x04
--#define MAILBOX_FULL_ADDR		0x08
--#define MAILBOX_EMPTY_ADDR		0x0c
--#define MAILBOX0_WR_DATA		0x10
--#define MAILBOX0_RD_DATA		0x14
--#define KEEP_ALIVE			0x18
--#define VER_L				0x1c
--#define VER_H				0x20
--#define VER_LIB_L_ADDR			0x24
--#define VER_LIB_H_ADDR			0x28
--#define SW_DEBUG_L			0x2c
--#define SW_DEBUG_H			0x30
--#define MAILBOX_INT_MASK		0x34
--#define MAILBOX_INT_STATUS		0x38
--#define SW_CLK_L			0x3c
--#define SW_CLK_H			0x40
--#define SW_EVENTS0			0x44
--#define SW_EVENTS1			0x48
--#define SW_EVENTS2			0x4c
--#define SW_EVENTS3			0x50
--#define XT_OCD_CTRL			0x60
--#define APB_INT_MASK			0x6c
--#define APB_STATUS_MASK			0x70
--
--/* audio decoder addr */
--#define AUDIO_SRC_CNTL			0x30000
--#define AUDIO_SRC_CNFG			0x30004
--#define COM_CH_STTS_BITS		0x30008
--#define STTS_BIT_CH(x)			(0x3000c + ((x) << 2))
--#define SPDIF_CTRL_ADDR			0x3004c
--#define SPDIF_CH1_CS_3100_ADDR		0x30050
--#define SPDIF_CH1_CS_6332_ADDR		0x30054
--#define SPDIF_CH1_CS_9564_ADDR		0x30058
--#define SPDIF_CH1_CS_12796_ADDR		0x3005c
--#define SPDIF_CH1_CS_159128_ADDR	0x30060
--#define SPDIF_CH1_CS_191160_ADDR	0x30064
--#define SPDIF_CH2_CS_3100_ADDR		0x30068
--#define SPDIF_CH2_CS_6332_ADDR		0x3006c
--#define SPDIF_CH2_CS_9564_ADDR		0x30070
--#define SPDIF_CH2_CS_12796_ADDR		0x30074
--#define SPDIF_CH2_CS_159128_ADDR	0x30078
--#define SPDIF_CH2_CS_191160_ADDR	0x3007c
--#define SMPL2PKT_CNTL			0x30080
--#define SMPL2PKT_CNFG			0x30084
--#define FIFO_CNTL			0x30088
--#define FIFO_STTS			0x3008c
--
--/* source pif addr */
--#define SOURCE_PIF_WR_ADDR		0x30800
--#define SOURCE_PIF_WR_REQ		0x30804
--#define SOURCE_PIF_RD_ADDR		0x30808
--#define SOURCE_PIF_RD_REQ		0x3080c
--#define SOURCE_PIF_DATA_WR		0x30810
--#define SOURCE_PIF_DATA_RD		0x30814
--#define SOURCE_PIF_FIFO1_FLUSH		0x30818
--#define SOURCE_PIF_FIFO2_FLUSH		0x3081c
--#define SOURCE_PIF_STATUS		0x30820
--#define SOURCE_PIF_INTERRUPT_SOURCE	0x30824
--#define SOURCE_PIF_INTERRUPT_MASK	0x30828
--#define SOURCE_PIF_PKT_ALLOC_REG	0x3082c
--#define SOURCE_PIF_PKT_ALLOC_WR_EN	0x30830
--#define SOURCE_PIF_SW_RESET		0x30834
--
--/* bellow registers need access by mailbox */
--/* source car addr */
--#define SOURCE_HDTX_CAR			0x0900
--#define SOURCE_DPTX_CAR			0x0904
--#define SOURCE_PHY_CAR			0x0908
--#define SOURCE_CEC_CAR			0x090c
--#define SOURCE_CBUS_CAR			0x0910
--#define SOURCE_PKT_CAR			0x0918
--#define SOURCE_AIF_CAR			0x091c
--#define SOURCE_CIPHER_CAR		0x0920
--#define SOURCE_CRYPTO_CAR		0x0924
--
--/* clock meters addr */
--#define CM_CTRL				0x0a00
--#define CM_I2S_CTRL			0x0a04
--#define CM_SPDIF_CTRL			0x0a08
--#define CM_VID_CTRL			0x0a0c
--#define CM_LANE_CTRL			0x0a10
--#define I2S_NM_STABLE			0x0a14
--#define I2S_NCTS_STABLE			0x0a18
--#define SPDIF_NM_STABLE			0x0a1c
--#define SPDIF_NCTS_STABLE		0x0a20
--#define NMVID_MEAS_STABLE		0x0a24
--#define I2S_MEAS			0x0a40
--#define SPDIF_MEAS			0x0a80
--#define NMVID_MEAS			0x0ac0
--
--/* source vif addr */
--#define BND_HSYNC2VSYNC			0x0b00
--#define HSYNC2VSYNC_F1_L1		0x0b04
--#define HSYNC2VSYNC_F2_L1		0x0b08
--#define HSYNC2VSYNC_STATUS		0x0b0c
--#define HSYNC2VSYNC_POL_CTRL		0x0b10
--
--/* dptx phy addr */
--#define DP_TX_PHY_CONFIG_REG		0x2000
--#define DP_TX_PHY_SW_RESET		0x2004
--#define DP_TX_PHY_SCRAMBLER_SEED	0x2008
--#define DP_TX_PHY_TRAINING_01_04	0x200c
--#define DP_TX_PHY_TRAINING_05_08	0x2010
--#define DP_TX_PHY_TRAINING_09_10	0x2014
--#define TEST_COR			0x23fc
--
--/* dptx hpd addr */
--#define HPD_IRQ_DET_MIN_TIMER		0x2100
--#define HPD_IRQ_DET_MAX_TIMER		0x2104
--#define HPD_UNPLGED_DET_MIN_TIMER	0x2108
--#define HPD_STABLE_TIMER		0x210c
--#define HPD_FILTER_TIMER		0x2110
--#define HPD_EVENT_MASK			0x211c
--#define HPD_EVENT_DET			0x2120
--
--/* dpyx framer addr */
--#define DP_FRAMER_GLOBAL_CONFIG		0x2200
--#define DP_SW_RESET			0x2204
--#define DP_FRAMER_TU			0x2208
--#define DP_FRAMER_PXL_REPR		0x220c
--#define DP_FRAMER_SP			0x2210
--#define AUDIO_PACK_CONTROL		0x2214
--#define DP_VC_TABLE(x)			(0x2218 + ((x) << 2))
--#define DP_VB_ID			0x2258
--#define DP_MTPH_LVP_CONTROL		0x225c
--#define DP_MTPH_SYMBOL_VALUES		0x2260
--#define DP_MTPH_ECF_CONTROL		0x2264
--#define DP_MTPH_ACT_CONTROL		0x2268
--#define DP_MTPH_STATUS			0x226c
--#define DP_INTERRUPT_SOURCE		0x2270
--#define DP_INTERRUPT_MASK		0x2274
--#define DP_FRONT_BACK_PORCH		0x2278
--#define DP_BYTE_COUNT			0x227c
--
--/* dptx stream addr */
--#define MSA_HORIZONTAL_0		0x2280
--#define MSA_HORIZONTAL_1		0x2284
--#define MSA_VERTICAL_0			0x2288
--#define MSA_VERTICAL_1			0x228c
--#define MSA_MISC			0x2290
--#define STREAM_CONFIG			0x2294
--#define AUDIO_PACK_STATUS		0x2298
--#define VIF_STATUS			0x229c
--#define PCK_STUFF_STATUS_0		0x22a0
--#define PCK_STUFF_STATUS_1		0x22a4
--#define INFO_PACK_STATUS		0x22a8
--#define RATE_GOVERNOR_STATUS		0x22ac
--#define DP_HORIZONTAL			0x22b0
--#define DP_VERTICAL_0			0x22b4
--#define DP_VERTICAL_1			0x22b8
--#define DP_BLOCK_SDP			0x22bc
--
--/* dptx glbl addr */
--#define DPTX_LANE_EN			0x2300
--#define DPTX_ENHNCD			0x2304
--#define DPTX_INT_MASK			0x2308
--#define DPTX_INT_STATUS			0x230c
--
--/* dp aux addr */
--#define DP_AUX_HOST_CONTROL		0x2800
--#define DP_AUX_INTERRUPT_SOURCE		0x2804
--#define DP_AUX_INTERRUPT_MASK		0x2808
--#define DP_AUX_SWAP_INVERSION_CONTROL	0x280c
--#define DP_AUX_SEND_NACK_TRANSACTION	0x2810
--#define DP_AUX_CLEAR_RX			0x2814
--#define DP_AUX_CLEAR_TX			0x2818
--#define DP_AUX_TIMER_STOP		0x281c
--#define DP_AUX_TIMER_CLEAR		0x2820
--#define DP_AUX_RESET_SW			0x2824
--#define DP_AUX_DIVIDE_2M		0x2828
--#define DP_AUX_TX_PREACHARGE_LENGTH	0x282c
--#define DP_AUX_FREQUENCY_1M_MAX		0x2830
--#define DP_AUX_FREQUENCY_1M_MIN		0x2834
--#define DP_AUX_RX_PRE_MIN		0x2838
--#define DP_AUX_RX_PRE_MAX		0x283c
--#define DP_AUX_TIMER_PRESET		0x2840
--#define DP_AUX_NACK_FORMAT		0x2844
--#define DP_AUX_TX_DATA			0x2848
--#define DP_AUX_RX_DATA			0x284c
--#define DP_AUX_TX_STATUS		0x2850
--#define DP_AUX_RX_STATUS		0x2854
--#define DP_AUX_RX_CYCLE_COUNTER		0x2858
--#define DP_AUX_MAIN_STATES		0x285c
--#define DP_AUX_MAIN_TIMER		0x2860
--#define DP_AUX_AFE_OUT			0x2864
--
--/* crypto addr */
--#define CRYPTO_HDCP_REVISION		0x5800
--#define HDCP_CRYPTO_CONFIG		0x5804
--#define CRYPTO_INTERRUPT_SOURCE		0x5808
--#define CRYPTO_INTERRUPT_MASK		0x580c
--#define CRYPTO22_CONFIG			0x5818
--#define CRYPTO22_STATUS			0x581c
--#define SHA_256_DATA_IN			0x583c
--#define SHA_256_DATA_OUT_(x)		(0x5850 + ((x) << 2))
--#define AES_32_KEY_(x)			(0x5870 + ((x) << 2))
--#define AES_32_DATA_IN			0x5880
--#define AES_32_DATA_OUT_(x)		(0x5884 + ((x) << 2))
--#define CRYPTO14_CONFIG			0x58a0
--#define CRYPTO14_STATUS			0x58a4
--#define CRYPTO14_PRNM_OUT		0x58a8
--#define CRYPTO14_KM_0			0x58ac
--#define CRYPTO14_KM_1			0x58b0
--#define CRYPTO14_AN_0			0x58b4
--#define CRYPTO14_AN_1			0x58b8
--#define CRYPTO14_YOUR_KSV_0		0x58bc
--#define CRYPTO14_YOUR_KSV_1		0x58c0
--#define CRYPTO14_MI_0			0x58c4
--#define CRYPTO14_MI_1			0x58c8
--#define CRYPTO14_TI_0			0x58cc
--#define CRYPTO14_KI_0			0x58d0
--#define CRYPTO14_KI_1			0x58d4
--#define CRYPTO14_BLOCKS_NUM		0x58d8
--#define CRYPTO14_KEY_MEM_DATA_0		0x58dc
--#define CRYPTO14_KEY_MEM_DATA_1		0x58e0
--#define CRYPTO14_SHA1_MSG_DATA		0x58e4
--#define CRYPTO14_SHA1_V_VALUE_(x)	(0x58e8 + ((x) << 2))
--#define TRNG_CTRL			0x58fc
--#define TRNG_DATA_RDY			0x5900
--#define TRNG_DATA			0x5904
--
--/* cipher addr */
--#define HDCP_REVISION			0x60000
--#define INTERRUPT_SOURCE		0x60004
--#define INTERRUPT_MASK			0x60008
--#define HDCP_CIPHER_CONFIG		0x6000c
--#define AES_128_KEY_0			0x60010
--#define AES_128_KEY_1			0x60014
--#define AES_128_KEY_2			0x60018
--#define AES_128_KEY_3			0x6001c
--#define AES_128_RANDOM_0		0x60020
--#define AES_128_RANDOM_1		0x60024
--#define CIPHER14_KM_0			0x60028
--#define CIPHER14_KM_1			0x6002c
--#define CIPHER14_STATUS			0x60030
--#define CIPHER14_RI_PJ_STATUS		0x60034
--#define CIPHER_MODE			0x60038
--#define CIPHER14_AN_0			0x6003c
--#define CIPHER14_AN_1			0x60040
--#define CIPHER22_AUTH			0x60044
--#define CIPHER14_R0_DP_STATUS		0x60048
--#define CIPHER14_BOOTSTRAP		0x6004c
--
--#define DPTX_FRMR_DATA_CLK_RSTN_EN	BIT(11)
--#define DPTX_FRMR_DATA_CLK_EN		BIT(10)
--#define DPTX_PHY_DATA_RSTN_EN		BIT(9)
--#define DPTX_PHY_DATA_CLK_EN		BIT(8)
--#define DPTX_PHY_CHAR_RSTN_EN		BIT(7)
--#define DPTX_PHY_CHAR_CLK_EN		BIT(6)
--#define SOURCE_AUX_SYS_CLK_RSTN_EN	BIT(5)
--#define SOURCE_AUX_SYS_CLK_EN		BIT(4)
--#define DPTX_SYS_CLK_RSTN_EN		BIT(3)
--#define DPTX_SYS_CLK_EN			BIT(2)
--#define CFG_DPTX_VIF_CLK_RSTN_EN	BIT(1)
--#define CFG_DPTX_VIF_CLK_EN		BIT(0)
--
--#define SOURCE_PHY_RSTN_EN		BIT(1)
--#define SOURCE_PHY_CLK_EN		BIT(0)
--
--#define SOURCE_PKT_SYS_RSTN_EN		BIT(3)
--#define SOURCE_PKT_SYS_CLK_EN		BIT(2)
--#define SOURCE_PKT_DATA_RSTN_EN		BIT(1)
--#define SOURCE_PKT_DATA_CLK_EN		BIT(0)
--
--#define SPDIF_CDR_CLK_RSTN_EN		BIT(5)
--#define SPDIF_CDR_CLK_EN		BIT(4)
--#define SOURCE_AIF_SYS_RSTN_EN		BIT(3)
--#define SOURCE_AIF_SYS_CLK_EN		BIT(2)
--#define SOURCE_AIF_CLK_RSTN_EN		BIT(1)
--#define SOURCE_AIF_CLK_EN		BIT(0)
--
--#define SOURCE_CIPHER_SYSTEM_CLK_RSTN_EN	BIT(3)
--#define SOURCE_CIPHER_SYS_CLK_EN		BIT(2)
--#define SOURCE_CIPHER_CHAR_CLK_RSTN_EN		BIT(1)
--#define SOURCE_CIPHER_CHAR_CLK_EN		BIT(0)
--
--#define SOURCE_CRYPTO_SYS_CLK_RSTN_EN	BIT(1)
--#define SOURCE_CRYPTO_SYS_CLK_EN	BIT(0)
--
--#define APB_IRAM_PATH			BIT(2)
--#define APB_DRAM_PATH			BIT(1)
--#define APB_XT_RESET			BIT(0)
--
--#define MAILBOX_INT_MASK_BIT		BIT(1)
--#define PIF_INT_MASK_BIT		BIT(0)
--#define ALL_INT_MASK			3
--
--/* mailbox */
--#define MB_OPCODE_ID			0
--#define MB_MODULE_ID			1
--#define MB_SIZE_MSB_ID			2
--#define MB_SIZE_LSB_ID			3
--#define MB_DATA_ID			4
--
--#define MB_MODULE_ID_DP_TX		0x01
--#define MB_MODULE_ID_HDCP_TX		0x07
--#define MB_MODULE_ID_HDCP_RX		0x08
--#define MB_MODULE_ID_HDCP_GENERAL	0x09
--#define MB_MODULE_ID_GENERAL		0x0a
--
--/* general opcode */
--#define GENERAL_MAIN_CONTROL            0x01
--#define GENERAL_TEST_ECHO               0x02
--#define GENERAL_BUS_SETTINGS            0x03
--#define GENERAL_TEST_ACCESS             0x04
--
--#define DPTX_SET_POWER_MNG			0x00
--#define DPTX_SET_HOST_CAPABILITIES		0x01
--#define DPTX_GET_EDID				0x02
--#define DPTX_READ_DPCD				0x03
--#define DPTX_WRITE_DPCD				0x04
--#define DPTX_ENABLE_EVENT			0x05
--#define DPTX_WRITE_REGISTER			0x06
--#define DPTX_READ_REGISTER			0x07
--#define DPTX_WRITE_FIELD			0x08
--#define DPTX_TRAINING_CONTROL			0x09
--#define DPTX_READ_EVENT				0x0a
--#define DPTX_READ_LINK_STAT			0x0b
--#define DPTX_SET_VIDEO				0x0c
--#define DPTX_SET_AUDIO				0x0d
--#define DPTX_GET_LAST_AUX_STAUS			0x0e
--#define DPTX_SET_LINK_BREAK_POINT		0x0f
--#define DPTX_FORCE_LANES			0x10
--#define DPTX_HPD_STATE				0x11
--
--#define FW_STANDBY				0
--#define FW_ACTIVE				1
--
--#define DPTX_EVENT_ENABLE_HPD			BIT(0)
--#define DPTX_EVENT_ENABLE_TRAINING		BIT(1)
--
--#define LINK_TRAINING_NOT_ACTIVE		0
--#define LINK_TRAINING_RUN			1
--#define LINK_TRAINING_RESTART			2
--
--#define CONTROL_VIDEO_IDLE			0
--#define CONTROL_VIDEO_VALID			1
--
--#define TU_CNT_RST_EN				BIT(15)
--#define VIF_BYPASS_INTERLACE			BIT(13)
--#define INTERLACE_FMT_DET			BIT(12)
--#define INTERLACE_DTCT_WIN			0x20
--
--#define DP_FRAMER_SP_INTERLACE_EN		BIT(2)
--#define DP_FRAMER_SP_HSP			BIT(1)
--#define DP_FRAMER_SP_VSP			BIT(0)
--
--/* capability */
--#define AUX_HOST_INVERT				3
--#define	FAST_LT_SUPPORT				1
--#define FAST_LT_NOT_SUPPORT			0
--#define LANE_MAPPING_NORMAL			0x1b
--#define LANE_MAPPING_FLIPPED			0xe4
--#define ENHANCED				1
--#define SCRAMBLER_EN				BIT(4)
--
--#define	FULL_LT_STARTED				BIT(0)
--#define FASE_LT_STARTED				BIT(1)
--#define CLK_RECOVERY_FINISHED			BIT(2)
--#define EQ_PHASE_FINISHED			BIT(3)
--#define FASE_LT_START_FINISHED			BIT(4)
--#define CLK_RECOVERY_FAILED			BIT(5)
--#define EQ_PHASE_FAILED				BIT(6)
--#define FASE_LT_FAILED				BIT(7)
--
--#define DPTX_HPD_EVENT				BIT(0)
--#define DPTX_TRAINING_EVENT			BIT(1)
--#define HDCP_TX_STATUS_EVENT			BIT(4)
--#define HDCP2_TX_IS_KM_STORED_EVENT		BIT(5)
--#define HDCP2_TX_STORE_KM_EVENT			BIT(6)
--#define HDCP_TX_IS_RECEIVER_ID_VALID_EVENT	BIT(7)
--
--#define TU_SIZE					30
--#define CDNS_DP_MAX_LINK_RATE			DP_LINK_BW_5_4
--
--/* audio */
--#define AUDIO_PACK_EN				BIT(8)
--#define SAMPLING_FREQ(x)			(((x) & 0xf) << 16)
--#define ORIGINAL_SAMP_FREQ(x)			(((x) & 0xf) << 24)
--#define SYNC_WR_TO_CH_ZERO			BIT(1)
--#define I2S_DEC_START				BIT(1)
--#define AUDIO_SW_RST				BIT(0)
--#define SMPL2PKT_EN				BIT(1)
--#define MAX_NUM_CH(x)				(((x) & 0x1f) - 1)
--#define NUM_OF_I2S_PORTS(x)			((((x) / 2 - 1) & 0x3) << 5)
--#define AUDIO_TYPE_LPCM				(2 << 7)
--#define CFG_SUB_PCKT_NUM(x)			((((x) - 1) & 0x7) << 11)
--#define AUDIO_CH_NUM(x)				((((x) - 1) & 0x1f) << 2)
--#define TRANS_SMPL_WIDTH_16			0
--#define TRANS_SMPL_WIDTH_24			BIT(11)
--#define TRANS_SMPL_WIDTH_32			(2 << 11)
--#define I2S_DEC_PORT_EN(x)			(((x) & 0xf) << 17)
--#define SPDIF_ENABLE				BIT(21)
--#define SPDIF_AVG_SEL				BIT(20)
--#define SPDIF_JITTER_BYPASS			BIT(19)
--#define SPDIF_FIFO_MID_RANGE(x)			(((x) & 0xff) << 11)
--#define SPDIF_JITTER_THRSH(x)			(((x) & 0xff) << 3)
--#define SPDIF_JITTER_AVG_WIN(x)			((x) & 0x7)
--
--/* Reference cycles when using lane clock as reference */
--#define LANE_REF_CYC				0x8000
--
--enum voltage_swing_level {
--	VOLTAGE_LEVEL_0,
--	VOLTAGE_LEVEL_1,
--	VOLTAGE_LEVEL_2,
--	VOLTAGE_LEVEL_3,
--};
--
--enum pre_emphasis_level {
--	PRE_EMPHASIS_LEVEL_0,
--	PRE_EMPHASIS_LEVEL_1,
--	PRE_EMPHASIS_LEVEL_2,
--	PRE_EMPHASIS_LEVEL_3,
--};
--
--enum pattern_set {
--	PTS1		= BIT(0),
--	PTS2		= BIT(1),
--	PTS3		= BIT(2),
--	PTS4		= BIT(3),
--	DP_NONE		= BIT(4)
--};
--
--enum vic_color_depth {
--	BCS_6 = 0x1,
--	BCS_8 = 0x2,
--	BCS_10 = 0x4,
--	BCS_12 = 0x8,
--	BCS_16 = 0x10,
--};
--
--enum vic_bt_type {
--	BT_601 = 0x0,
--	BT_709 = 0x1,
--};
--
--enum audio_format {
--	AFMT_I2S = 0,
--	AFMT_SPDIF = 1,
--	AFMT_UNUSED,
--};
--
--struct audio_info {
--	enum audio_format format;
--	int sample_rate;
--	int channels;
--	int sample_width;
--};
--
--enum vic_pxl_encoding_format {
--	PXL_RGB = 0x1,
--	YCBCR_4_4_4 = 0x2,
--	YCBCR_4_2_2 = 0x4,
--	YCBCR_4_2_0 = 0x8,
--	Y_ONLY = 0x10,
--};
--
--struct video_info {
--	bool h_sync_polarity;
--	bool v_sync_polarity;
--	bool interlaced;
--	int color_depth;
--	enum vic_pxl_encoding_format color_fmt;
--};
--
--struct cdns_mhdp_host {
--	unsigned int	link_rate;
--	u8	lanes_cnt;
--	u8	volt_swing;
--	u8	pre_emphasis;
--	u8	pattern_supp;
--	u8	fast_link;
--	u8	lane_mapping;
--	u8	enhanced;
--};
--
--struct cdns_mhdp_sink {
--	unsigned int	link_rate;
--	u8	lanes_cnt;
--	u8	pattern_supp;
--	u8	fast_link;
--	u8	enhanced;
--};
--
--struct cdns_mhdp_device {
--	void __iomem		*regs;
--
--	struct device		*dev;
--
--	struct drm_dp_link	link;
--	struct drm_connector	connector;
--	struct clk		*spdif_clk;
--	struct reset_control	*spdif_rst;
--
--	struct drm_dp_aux	aux;
--	struct cdns_mhdp_host	host;
--	struct cdns_mhdp_sink	sink;
--	struct drm_bridge	bridge;
--	struct phy		*phy;
--	void __iomem		*dbg_regs;
--
--	struct video_info	video_info;
--	struct drm_display_mode	mode;
--	unsigned int		fw_version;
--};
--
--void cdns_mhdp_clock_reset(struct cdns_mhdp_device *mhdp);
--void cdns_mhdp_set_fw_clk(struct cdns_mhdp_device *mhdp, unsigned long clk);
--int cdns_mhdp_load_firmware(struct cdns_mhdp_device *mhdp, const u32 *i_mem,
--			    u32 i_size, const u32 *d_mem, u32 d_size);
--int cdns_mhdp_set_firmware_active(struct cdns_mhdp_device *mhdp, bool enable);
--int cdns_mhdp_set_host_cap(struct cdns_mhdp_device *mhdp, u8 lanes, bool flip);
--int cdns_mhdp_event_config(struct cdns_mhdp_device *mhdp);
--u32 cdns_mhdp_get_event(struct cdns_mhdp_device *mhdp);
--int cdns_mhdp_get_hpd_status(struct cdns_mhdp_device *mhdp);
--int cdns_mhdp_dpcd_write(struct cdns_mhdp_device *mhdp, u32 addr, u8 value);
--int cdns_mhdp_dpcd_read(struct cdns_mhdp_device *mhdp,
--			u32 addr, u8 *data, u16 len);
--int cdns_mhdp_get_edid_block(void *mhdp, u8 *edid,
--			     unsigned int block, size_t length);
--int cdns_mhdp_train_link(struct cdns_mhdp_device *mhdp);
--int cdns_mhdp_set_video_status(struct cdns_mhdp_device *mhdp, int active);
--int cdns_mhdp_config_video(struct cdns_mhdp_device *mhdp);
--int cdns_mhdp_audio_stop(struct cdns_mhdp_device *mhdp,
--			 struct audio_info *audio);
--int cdns_mhdp_audio_mute(struct cdns_mhdp_device *mhdp, bool enable);
--int cdns_mhdp_audio_config(struct cdns_mhdp_device *mhdp,
--			   struct audio_info *audio);
--#endif /* _CDN_DP_REG_H */
---- /dev/null
-+++ b/include/drm/bridge/cdns-mhdp-cbs.h
-@@ -0,0 +1,29 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Cadence MHDP DP bridge callbacks.
-+ *
-+ * Copyright: 2018 Cadence Design Systems, Inc.
-+ *
-+ * Author: Piotr Sroka <piotrs@cadence.com>
-+ */
-+
-+#ifndef CDNS_MHDP_CBS_H
-+#define CDNS_MHDP_CBS_H
-+
-+#include <drm/drm_bridge.h>
-+
-+struct cdns_mhdp_mst_cbs_funcs {
-+	struct drm_encoder *(*create_mst_encoder)(void *priv_data,
-+						  struct drm_bridge *bridge);
-+	void (*destroy_mst_encoder)(void *priv_data, struct drm_bridge *bridge);
-+};
-+
-+struct cdns_mhdp_mst_cbs {
-+	struct cdns_mhdp_mst_cbs_funcs funcs;
-+	void *priv_data;
-+};
-+
-+int mhdp_bridge_attach_mst_cbs(struct drm_bridge *bridge,
-+			       struct cdns_mhdp_mst_cbs *cbs);
-+
-+#endif
---- /dev/null
-+++ b/include/drm/bridge/cdns-mhdp-common.h
-@@ -0,0 +1,704 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
-+ * Author: Chris Zhong <zyw@rock-chips.com>
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef CDNS_MHDP_COMMON_H_
-+#define CDNS_MHDP_COMMON_H_
-+
-+#include <drm/bridge/cdns-mhdp-cbs.h>
-+#include <drm/drm_bridge.h>
-+#include <drm/drm_connector.h>
-+#include <drm/drm_dp_helper.h>
-+#include <drm/drm_dp_mst_helper.h>
-+
-+#include <linux/bitops.h>
-+
-+#define ADDR_IMEM		0x10000
-+#define ADDR_DMEM		0x20000
-+#define ADDR_PHY_AFE	0x80000
-+
-+/* APB CFG addr */
-+#define APB_CTRL			0
-+#define XT_INT_CTRL			0x04
-+#define MAILBOX_FULL_ADDR		0x08
-+#define MAILBOX_EMPTY_ADDR		0x0c
-+#define MAILBOX0_WR_DATA		0x10
-+#define MAILBOX0_RD_DATA		0x14
-+#define KEEP_ALIVE			0x18
-+#define VER_L				0x1c
-+#define VER_H				0x20
-+#define VER_LIB_L_ADDR			0x24
-+#define VER_LIB_H_ADDR			0x28
-+#define SW_DEBUG_L			0x2c
-+#define SW_DEBUG_H			0x30
-+#define MAILBOX_INT_MASK		0x34
-+#define MAILBOX_INT_STATUS		0x38
-+#define SW_CLK_L			0x3c
-+#define SW_CLK_H			0x40
-+#define SW_EVENTS0			0x44
-+#define SW_EVENTS1			0x48
-+#define SW_EVENTS2			0x4c
-+#define SW_EVENTS3			0x50
-+#define XT_OCD_CTRL			0x60
-+#define APB_INT_MASK			0x6c
-+#define APB_STATUS_MASK			0x70
-+
-+/* audio decoder addr */
-+#define AUDIO_SRC_CNTL			0x30000
-+#define AUDIO_SRC_CNFG			0x30004
-+#define COM_CH_STTS_BITS		0x30008
-+#define STTS_BIT_CH(x)			(0x3000c + ((x) << 2))
-+#define SPDIF_CTRL_ADDR			0x3004c
-+#define SPDIF_CH1_CS_3100_ADDR		0x30050
-+#define SPDIF_CH1_CS_6332_ADDR		0x30054
-+#define SPDIF_CH1_CS_9564_ADDR		0x30058
-+#define SPDIF_CH1_CS_12796_ADDR		0x3005c
-+#define SPDIF_CH1_CS_159128_ADDR	0x30060
-+#define SPDIF_CH1_CS_191160_ADDR	0x30064
-+#define SPDIF_CH2_CS_3100_ADDR		0x30068
-+#define SPDIF_CH2_CS_6332_ADDR		0x3006c
-+#define SPDIF_CH2_CS_9564_ADDR		0x30070
-+#define SPDIF_CH2_CS_12796_ADDR		0x30074
-+#define SPDIF_CH2_CS_159128_ADDR	0x30078
-+#define SPDIF_CH2_CS_191160_ADDR	0x3007c
-+#define SMPL2PKT_CNTL			0x30080
-+#define SMPL2PKT_CNFG			0x30084
-+#define FIFO_CNTL			0x30088
-+#define FIFO_STTS			0x3008c
-+
-+/* source pif addr */
-+#define SOURCE_PIF_WR_ADDR		0x30800
-+#define SOURCE_PIF_WR_REQ		0x30804
-+#define SOURCE_PIF_RD_ADDR		0x30808
-+#define SOURCE_PIF_RD_REQ		0x3080c
-+#define SOURCE_PIF_DATA_WR		0x30810
-+#define SOURCE_PIF_DATA_RD		0x30814
-+#define SOURCE_PIF_FIFO1_FLUSH		0x30818
-+#define SOURCE_PIF_FIFO2_FLUSH		0x3081c
-+#define SOURCE_PIF_STATUS		0x30820
-+#define SOURCE_PIF_INTERRUPT_SOURCE	0x30824
-+#define SOURCE_PIF_INTERRUPT_MASK	0x30828
-+#define SOURCE_PIF_PKT_ALLOC_REG	0x3082c
-+#define SOURCE_PIF_PKT_ALLOC_WR_EN	0x30830
-+#define SOURCE_PIF_SW_RESET		0x30834
-+
-+/* bellow registers need access by mailbox */
-+/* source phy comp */
-+#define PHY_DATA_SEL			0x0818
-+#define LANES_CONFIG			0x0814
-+
-+/* source car addr */
-+#define SOURCE_HDTX_CAR			0x0900
-+#define SOURCE_DPTX_CAR			0x0904
-+#define SOURCE_PHY_CAR			0x0908
-+#define SOURCE_CEC_CAR			0x090c
-+#define SOURCE_CBUS_CAR			0x0910
-+#define SOURCE_PKT_CAR			0x0918
-+#define SOURCE_AIF_CAR			0x091c
-+#define SOURCE_CIPHER_CAR		0x0920
-+#define SOURCE_CRYPTO_CAR		0x0924
-+
-+/* mhdp tx_top_comp */
-+#define SCHEDULER_H_SIZE		0x1000
-+#define SCHEDULER_V_SIZE		0x1004
-+#define HDTX_SIGNAL_FRONT_WIDTH	0x100c
-+#define HDTX_SIGNAL_SYNC_WIDTH	0x1010
-+#define HDTX_SIGNAL_BACK_WIDTH	0x1014
-+#define HDTX_CONTROLLER			0x1018
-+#define HDTX_HPD				0x1020
-+#define HDTX_CLOCK_REG_0		0x1024
-+#define HDTX_CLOCK_REG_1		0x1028
-+
-+/* clock meters addr */
-+#define CM_CTRL				0x0a00
-+#define CM_I2S_CTRL			0x0a04
-+#define CM_SPDIF_CTRL			0x0a08
-+#define CM_VID_CTRL			0x0a0c
-+#define CM_LANE_CTRL			0x0a10
-+#define I2S_NM_STABLE			0x0a14
-+#define I2S_NCTS_STABLE			0x0a18
-+#define SPDIF_NM_STABLE			0x0a1c
-+#define SPDIF_NCTS_STABLE		0x0a20
-+#define NMVID_MEAS_STABLE		0x0a24
-+#define I2S_MEAS			0x0a40
-+#define SPDIF_MEAS			0x0a80
-+#define NMVID_MEAS			0x0ac0
-+
-+/* source vif addr */
-+#define BND_HSYNC2VSYNC			0x0b00
-+#define HSYNC2VSYNC_F1_L1		0x0b04
-+#define HSYNC2VSYNC_F2_L1		0x0b08
-+#define HSYNC2VSYNC_STATUS		0x0b0c
-+#define HSYNC2VSYNC_POL_CTRL		0x0b10
-+
-+/* dptx phy addr */
-+#define DP_TX_PHY_CONFIG_REG		0x2000
-+#define DP_TX_PHY_SW_RESET		0x2004
-+#define DP_TX_PHY_SCRAMBLER_SEED	0x2008
-+#define DP_TX_PHY_TRAINING_01_04	0x200c
-+#define DP_TX_PHY_TRAINING_05_08	0x2010
-+#define DP_TX_PHY_TRAINING_09_10	0x2014
-+#define TEST_COR			0x23fc
-+
-+/* dptx hpd addr */
-+#define HPD_IRQ_DET_MIN_TIMER		0x2100
-+#define HPD_IRQ_DET_MAX_TIMER		0x2104
-+#define HPD_UNPLGED_DET_MIN_TIMER	0x2108
-+#define HPD_STABLE_TIMER		0x210c
-+#define HPD_FILTER_TIMER		0x2110
-+#define HPD_EVENT_MASK			0x211c
-+#define HPD_EVENT_DET			0x2120
-+
-+/* dpyx framer addr */
-+#define DP_FRAMER_GLOBAL_CONFIG		0x2200
-+#define DP_SW_RESET			0x2204
-+#define DP_FRAMER_TU			0x2208
-+#define DP_FRAMER_PXL_REPR		0x220c
-+#define DP_FRAMER_SP			0x2210
-+#define AUDIO_PACK_CONTROL		0x2214
-+#define DP_VC_TABLE(x)			(0x2218 + ((x) << 2))
-+#define DP_VB_ID			0x2258
-+#define DP_MTPH_LVP_CONTROL		0x225c
-+#define DP_MTPH_SYMBOL_VALUES		0x2260
-+#define DP_MTPH_ECF_CONTROL		0x2264
-+#define DP_MTPH_ACT_CONTROL		0x2268
-+#define DP_MTPH_STATUS			0x226c
-+#define DP_INTERRUPT_SOURCE		0x2270
-+#define DP_INTERRUPT_MASK		0x2274
-+#define DP_FRONT_BACK_PORCH		0x2278
-+#define DP_BYTE_COUNT			0x227c
-+
-+/* dptx stream addr */
-+#define MSA_HORIZONTAL_0		0x2280
-+#define MSA_HORIZONTAL_1		0x2284
-+#define MSA_VERTICAL_0			0x2288
-+#define MSA_VERTICAL_1			0x228c
-+#define MSA_MISC			0x2290
-+#define STREAM_CONFIG			0x2294
-+#define AUDIO_PACK_STATUS		0x2298
-+#define VIF_STATUS			0x229c
-+#define PCK_STUFF_STATUS_0		0x22a0
-+#define PCK_STUFF_STATUS_1		0x22a4
-+#define INFO_PACK_STATUS		0x22a8
-+#define RATE_GOVERNOR_STATUS		0x22ac
-+#define DP_HORIZONTAL			0x22b0
-+#define DP_VERTICAL_0			0x22b4
-+#define DP_VERTICAL_1			0x22b8
-+#define DP_BLOCK_SDP			0x22bc
-+
-+/* dptx glbl addr */
-+#define DPTX_LANE_EN			0x2300
-+#define DPTX_ENHNCD			0x2304
-+#define DPTX_INT_MASK			0x2308
-+#define DPTX_INT_STATUS			0x230c
-+
-+/* dp aux addr */
-+#define DP_AUX_HOST_CONTROL		0x2800
-+#define DP_AUX_INTERRUPT_SOURCE		0x2804
-+#define DP_AUX_INTERRUPT_MASK		0x2808
-+#define DP_AUX_SWAP_INVERSION_CONTROL	0x280c
-+#define DP_AUX_SEND_NACK_TRANSACTION	0x2810
-+#define DP_AUX_CLEAR_RX			0x2814
-+#define DP_AUX_CLEAR_TX			0x2818
-+#define DP_AUX_TIMER_STOP		0x281c
-+#define DP_AUX_TIMER_CLEAR		0x2820
-+#define DP_AUX_RESET_SW			0x2824
-+#define DP_AUX_DIVIDE_2M		0x2828
-+#define DP_AUX_TX_PREACHARGE_LENGTH	0x282c
-+#define DP_AUX_FREQUENCY_1M_MAX		0x2830
-+#define DP_AUX_FREQUENCY_1M_MIN		0x2834
-+#define DP_AUX_RX_PRE_MIN		0x2838
-+#define DP_AUX_RX_PRE_MAX		0x283c
-+#define DP_AUX_TIMER_PRESET		0x2840
-+#define DP_AUX_NACK_FORMAT		0x2844
-+#define DP_AUX_TX_DATA			0x2848
-+#define DP_AUX_RX_DATA			0x284c
-+#define DP_AUX_TX_STATUS		0x2850
-+#define DP_AUX_RX_STATUS		0x2854
-+#define DP_AUX_RX_CYCLE_COUNTER		0x2858
-+#define DP_AUX_MAIN_STATES		0x285c
-+#define DP_AUX_MAIN_TIMER		0x2860
-+#define DP_AUX_AFE_OUT			0x2864
-+
-+/* crypto addr */
-+#define CRYPTO_HDCP_REVISION		0x5800
-+#define HDCP_CRYPTO_CONFIG		0x5804
-+#define CRYPTO_INTERRUPT_SOURCE		0x5808
-+#define CRYPTO_INTERRUPT_MASK		0x580c
-+#define CRYPTO22_CONFIG			0x5818
-+#define CRYPTO22_STATUS			0x581c
-+#define SHA_256_DATA_IN			0x583c
-+#define SHA_256_DATA_OUT_(x)		(0x5850 + ((x) << 2))
-+#define AES_32_KEY_(x)			(0x5870 + ((x) << 2))
-+#define AES_32_DATA_IN			0x5880
-+#define AES_32_DATA_OUT_(x)		(0x5884 + ((x) << 2))
-+#define CRYPTO14_CONFIG			0x58a0
-+#define CRYPTO14_STATUS			0x58a4
-+#define CRYPTO14_PRNM_OUT		0x58a8
-+#define CRYPTO14_KM_0			0x58ac
-+#define CRYPTO14_KM_1			0x58b0
-+#define CRYPTO14_AN_0			0x58b4
-+#define CRYPTO14_AN_1			0x58b8
-+#define CRYPTO14_YOUR_KSV_0		0x58bc
-+#define CRYPTO14_YOUR_KSV_1		0x58c0
-+#define CRYPTO14_MI_0			0x58c4
-+#define CRYPTO14_MI_1			0x58c8
-+#define CRYPTO14_TI_0			0x58cc
-+#define CRYPTO14_KI_0			0x58d0
-+#define CRYPTO14_KI_1			0x58d4
-+#define CRYPTO14_BLOCKS_NUM		0x58d8
-+#define CRYPTO14_KEY_MEM_DATA_0		0x58dc
-+#define CRYPTO14_KEY_MEM_DATA_1		0x58e0
-+#define CRYPTO14_SHA1_MSG_DATA		0x58e4
-+#define CRYPTO14_SHA1_V_VALUE_(x)	(0x58e8 + ((x) << 2))
-+#define TRNG_CTRL			0x58fc
-+#define TRNG_DATA_RDY			0x5900
-+#define TRNG_DATA			0x5904
-+
-+/* cipher addr */
-+#define HDCP_REVISION			0x60000
-+#define INTERRUPT_SOURCE		0x60004
-+#define INTERRUPT_MASK			0x60008
-+#define HDCP_CIPHER_CONFIG		0x6000c
-+#define AES_128_KEY_0			0x60010
-+#define AES_128_KEY_1			0x60014
-+#define AES_128_KEY_2			0x60018
-+#define AES_128_KEY_3			0x6001c
-+#define AES_128_RANDOM_0		0x60020
-+#define AES_128_RANDOM_1		0x60024
-+#define CIPHER14_KM_0			0x60028
-+#define CIPHER14_KM_1			0x6002c
-+#define CIPHER14_STATUS			0x60030
-+#define CIPHER14_RI_PJ_STATUS		0x60034
-+#define CIPHER_MODE			0x60038
-+#define CIPHER14_AN_0			0x6003c
-+#define CIPHER14_AN_1			0x60040
-+#define CIPHER22_AUTH			0x60044
-+#define CIPHER14_R0_DP_STATUS		0x60048
-+#define CIPHER14_BOOTSTRAP		0x6004c
-+
-+#define DPTX_FRMR_DATA_CLK_RSTN_EN	BIT(11)
-+#define DPTX_FRMR_DATA_CLK_EN		BIT(10)
-+#define DPTX_PHY_DATA_RSTN_EN		BIT(9)
-+#define DPTX_PHY_DATA_CLK_EN		BIT(8)
-+#define DPTX_PHY_CHAR_RSTN_EN		BIT(7)
-+#define DPTX_PHY_CHAR_CLK_EN		BIT(6)
-+#define SOURCE_AUX_SYS_CLK_RSTN_EN	BIT(5)
-+#define SOURCE_AUX_SYS_CLK_EN		BIT(4)
-+#define DPTX_SYS_CLK_RSTN_EN		BIT(3)
-+#define DPTX_SYS_CLK_EN			BIT(2)
-+#define CFG_DPTX_VIF_CLK_RSTN_EN	BIT(1)
-+#define CFG_DPTX_VIF_CLK_EN		BIT(0)
-+
-+#define SOURCE_PHY_RSTN_EN		BIT(1)
-+#define SOURCE_PHY_CLK_EN		BIT(0)
-+
-+#define SOURCE_PKT_SYS_RSTN_EN		BIT(3)
-+#define SOURCE_PKT_SYS_CLK_EN		BIT(2)
-+#define SOURCE_PKT_DATA_RSTN_EN		BIT(1)
-+#define SOURCE_PKT_DATA_CLK_EN		BIT(0)
-+
-+#define SPDIF_CDR_CLK_RSTN_EN		BIT(5)
-+#define SPDIF_CDR_CLK_EN		BIT(4)
-+#define SOURCE_AIF_SYS_RSTN_EN		BIT(3)
-+#define SOURCE_AIF_SYS_CLK_EN		BIT(2)
-+#define SOURCE_AIF_CLK_RSTN_EN		BIT(1)
-+#define SOURCE_AIF_CLK_EN		BIT(0)
-+
-+#define SOURCE_CIPHER_SYSTEM_CLK_RSTN_EN	BIT(3)
-+#define SOURCE_CIPHER_SYS_CLK_EN		BIT(2)
-+#define SOURCE_CIPHER_CHAR_CLK_RSTN_EN		BIT(1)
-+#define SOURCE_CIPHER_CHAR_CLK_EN		BIT(0)
-+
-+#define SOURCE_CRYPTO_SYS_CLK_RSTN_EN	BIT(1)
-+#define SOURCE_CRYPTO_SYS_CLK_EN	BIT(0)
-+
-+#define APB_IRAM_PATH			BIT(2)
-+#define APB_DRAM_PATH			BIT(1)
-+#define APB_XT_RESET			BIT(0)
-+
-+#define MAILBOX_INT_MASK_BIT		BIT(1)
-+#define PIF_INT_MASK_BIT		BIT(0)
-+#define ALL_INT_MASK			3
-+
-+/* mailbox */
-+#define MB_OPCODE_ID			0
-+#define MB_MODULE_ID			1
-+#define MB_SIZE_MSB_ID			2
-+#define MB_SIZE_LSB_ID			3
-+#define MB_DATA_ID			4
-+
-+#define MB_MODULE_ID_DP_TX			0x01
-+#define MB_MODULE_ID_HDMI_TX		0x03
-+#define MB_MODULE_ID_HDCP_TX		0x07
-+#define MB_MODULE_ID_HDCP_RX		0x08
-+#define MB_MODULE_ID_HDCP_GENERAL	0x09
-+#define MB_MODULE_ID_GENERAL		0x0A
-+
-+/* general opcode */
-+#define GENERAL_MAIN_CONTROL            0x01
-+#define GENERAL_TEST_ECHO               0x02
-+#define GENERAL_BUS_SETTINGS            0x03
-+#define GENERAL_TEST_ACCESS             0x04
-+#define GENERAL_WRITE_REGISTER          0x05
-+#define GENERAL_WRITE_FIELD             0x06
-+#define GENERAL_READ_REGISTER           0x07
-+#define GENERAL_GET_HPD_STATE           0x11
-+
-+/* DPTX opcode */
-+#define DPTX_SET_POWER_MNG			0x00
-+#define DPTX_SET_HOST_CAPABILITIES		0x01
-+#define DPTX_GET_EDID				0x02
-+#define DPTX_READ_DPCD				0x03
-+#define DPTX_WRITE_DPCD				0x04
-+#define DPTX_ENABLE_EVENT			0x05
-+#define DPTX_WRITE_REGISTER			0x06
-+#define DPTX_READ_REGISTER			0x07
-+#define DPTX_WRITE_FIELD			0x08
-+#define DPTX_TRAINING_CONTROL			0x09
-+#define DPTX_READ_EVENT				0x0a
-+#define DPTX_READ_LINK_STAT			0x0b
-+#define DPTX_SET_VIDEO				0x0c
-+#define DPTX_SET_AUDIO				0x0d
-+#define DPTX_GET_LAST_AUX_STAUS			0x0e
-+#define DPTX_SET_LINK_BREAK_POINT		0x0f
-+#define DPTX_FORCE_LANES			0x10
-+#define DPTX_HPD_STATE				0x11
-+#define DPTX_ADJUST_LT				0x12
-+
-+/* HDMI TX opcode */
-+#define HDMI_TX_READ				0x00
-+#define HDMI_TX_WRITE				0x01
-+#define HDMI_TX_UPDATE_READ			0x02
-+#define HDMI_TX_EDID				0x03
-+#define HDMI_TX_EVENTS				0x04
-+#define HDMI_TX_HPD_STATUS			0x05
-+#define HDMI_TX_DEBUG_ECHO			0xAA
-+#define HDMI_TX_TEST				0xBB
-+#define HDMI_TX_EDID_INTERNAL		0xF0
-+
-+#define FW_STANDBY				0
-+#define FW_ACTIVE				1
-+
-+#define DPTX_EVENT_ENABLE_HPD			BIT(0)
-+#define DPTX_EVENT_ENABLE_TRAINING		BIT(1)
-+
-+#define LINK_TRAINING_NOT_ACTIVE		0
-+#define LINK_TRAINING_RUN			1
-+#define LINK_TRAINING_RESTART			2
-+
-+#define CONTROL_VIDEO_IDLE			0
-+#define CONTROL_VIDEO_VALID			1
-+
-+#define TU_CNT_RST_EN				BIT(15)
-+#define VIF_BYPASS_INTERLACE			BIT(13)
-+#define INTERLACE_FMT_DET			BIT(12)
-+#define INTERLACE_DTCT_WIN			0x20
-+
-+#define DP_FRAMER_SP_INTERLACE_EN		BIT(2)
-+#define DP_FRAMER_SP_HSP			BIT(1)
-+#define DP_FRAMER_SP_VSP			BIT(0)
-+
-+/* capability */
-+#define AUX_HOST_INVERT				3
-+#define	FAST_LT_SUPPORT				1
-+#define FAST_LT_NOT_SUPPORT			0
-+#define LANE_MAPPING_NORMAL			0x1b
-+#define LANE_MAPPING_FLIPPED			0xe4
-+#define ENHANCED				1
-+#define SCRAMBLER_EN				BIT(4)
-+
-+#define	FULL_LT_STARTED				BIT(0)
-+#define FASE_LT_STARTED				BIT(1)
-+#define CLK_RECOVERY_FINISHED			BIT(2)
-+#define EQ_PHASE_FINISHED			BIT(3)
-+#define FASE_LT_START_FINISHED			BIT(4)
-+#define CLK_RECOVERY_FAILED			BIT(5)
-+#define EQ_PHASE_FAILED				BIT(6)
-+#define FASE_LT_FAILED				BIT(7)
-+
-+#define DPTX_HPD_EVENT				BIT(0)
-+#define DPTX_TRAINING_EVENT			BIT(1)
-+#define HDCP_TX_STATUS_EVENT			BIT(4)
-+#define HDCP2_TX_IS_KM_STORED_EVENT		BIT(5)
-+#define HDCP2_TX_STORE_KM_EVENT			BIT(6)
-+#define HDCP_TX_IS_RECEIVER_ID_VALID_EVENT	BIT(7)
-+
-+#define TU_SIZE					30
-+#define CDNS_DP_MAX_LINK_RATE			DP_LINK_BW_5_4
-+
-+#define F_HDMI_ENCODING(x) (((x) & ((1 << 2) - 1)) << 16)
-+#define F_VIF_DATA_WIDTH(x) (((x) & ((1 << 2) - 1)) << 2)
-+#define F_HDMI_MODE(x) (((x) & ((1 << 2) - 1)) << 0)
-+#define F_GCP_EN(x) (((x) & ((1 << 1) - 1)) << 12)
-+#define F_DATA_EN(x) (((x) & ((1 << 1) - 1)) << 15)
-+#define F_HDMI2_PREAMBLE_EN(x) (((x) & ((1 << 1) - 1)) << 18)
-+#define F_PIC_3D(x) (((x) & ((1 << 4) - 1)) << 7)
-+#define F_BCH_EN(x) (((x) & ((1 << 1) - 1)) << 11)
-+#define F_SOURCE_PHY_MHDP_SEL(x) (((x) & ((1 << 2) - 1)) << 3)
-+#define F_HPD_VALID_WIDTH(x) (((x) & ((1 << 12) - 1)) << 0)
-+#define F_HPD_GLITCH_WIDTH(x) (((x) & ((1 << 8) - 1)) << 12)
-+#define F_HDMI2_CTRL_IL_MODE(x) (((x) & ((1 << 1) - 1)) << 19)
-+#define F_SOURCE_PHY_LANE0_SWAP(x) (((x) & ((1 << 2) - 1)) << 0)
-+#define F_SOURCE_PHY_LANE1_SWAP(x) (((x) & ((1 << 2) - 1)) << 2)
-+#define F_SOURCE_PHY_LANE2_SWAP(x) (((x) & ((1 << 2) - 1)) << 4)
-+#define F_SOURCE_PHY_LANE3_SWAP(x) (((x) & ((1 << 2) - 1)) << 6)
-+#define F_SOURCE_PHY_COMB_BYPASS(x) (((x) & ((1 << 1) - 1)) << 21)
-+#define F_SOURCE_PHY_20_10(x) (((x) & ((1 << 1) - 1)) << 22)
-+#define F_PKT_ALLOC_ADDRESS(x) (((x) & ((1 << 4) - 1)) << 0)
-+#define F_ACTIVE_IDLE_TYPE(x) (((x) & ((1 << 1) - 1)) << 17)
-+#define F_FIFO1_FLUSH(x) (((x) & ((1 << 1) - 1)) << 0)
-+#define F_PKT_ALLOC_WR_EN(x) (((x) & ((1 << 1) - 1)) << 0)
-+#define F_DATA_WR(x) (x)
-+#define F_WR_ADDR(x) (((x) & ((1 << 4) - 1)) << 0)
-+#define F_HOST_WR(x) (((x) & ((1 << 1) - 1)) << 0)
-+#define F_TYPE_VALID(x) (((x) & ((1 << 1) - 1)) << 16)
-+#define F_PACKET_TYPE(x) (((x) & ((1 << 8) - 1)) << 8)
-+
-+/* audio */
-+#define AUDIO_PACK_EN				BIT(8)
-+#define SAMPLING_FREQ(x)			(((x) & 0xf) << 16)
-+#define ORIGINAL_SAMP_FREQ(x)			(((x) & 0xf) << 24)
-+#define SYNC_WR_TO_CH_ZERO			BIT(1)
-+#define I2S_DEC_START				BIT(1)
-+#define AUDIO_SW_RST				BIT(0)
-+#define SMPL2PKT_EN				BIT(1)
-+#define MAX_NUM_CH(x)				(((x) & 0x1f) - 1)
-+#define NUM_OF_I2S_PORTS(x)			((((x) / 2 - 1) & 0x3) << 5)
-+#define AUDIO_TYPE_LPCM				(2 << 7)
-+#define CFG_SUB_PCKT_NUM(x)			((((x) - 1) & 0x7) << 11)
-+#define AUDIO_CH_NUM(x)				((((x) - 1) & 0x1f) << 2)
-+#define TRANS_SMPL_WIDTH_16			0
-+#define TRANS_SMPL_WIDTH_24			BIT(11)
-+#define TRANS_SMPL_WIDTH_32			(2 << 11)
-+#define I2S_DEC_PORT_EN(x)			(((x) & 0xf) << 17)
-+#define SPDIF_ENABLE				BIT(21)
-+#define SPDIF_AVG_SEL				BIT(20)
-+#define SPDIF_JITTER_BYPASS			BIT(19)
-+#define SPDIF_FIFO_MID_RANGE(x)			(((x) & 0xff) << 11)
-+#define SPDIF_JITTER_THRSH(x)			(((x) & 0xff) << 3)
-+#define SPDIF_JITTER_AVG_WIN(x)			((x) & 0x7)
-+
-+/* Reference cycles when using lane clock as reference */
-+#define LANE_REF_CYC				0x8000
-+
-+#define HOTPLUG_DEBOUNCE_MS		200
-+
-+enum voltage_swing_level {
-+	VOLTAGE_LEVEL_0,
-+	VOLTAGE_LEVEL_1,
-+	VOLTAGE_LEVEL_2,
-+	VOLTAGE_LEVEL_3,
-+};
-+
-+enum pre_emphasis_level {
-+	PRE_EMPHASIS_LEVEL_0,
-+	PRE_EMPHASIS_LEVEL_1,
-+	PRE_EMPHASIS_LEVEL_2,
-+	PRE_EMPHASIS_LEVEL_3,
-+};
-+
-+enum pattern_set {
-+	PTS1		= BIT(0),
-+	PTS2		= BIT(1),
-+	PTS3		= BIT(2),
-+	PTS4		= BIT(3),
-+	DP_NONE		= BIT(4)
-+};
-+
-+enum vic_color_depth {
-+	BCS_6 = 0x1,
-+	BCS_8 = 0x2,
-+	BCS_10 = 0x4,
-+	BCS_12 = 0x8,
-+	BCS_16 = 0x10,
-+};
-+
-+enum vic_bt_type {
-+	BT_601 = 0x0,
-+	BT_709 = 0x1,
-+};
-+
-+enum audio_format {
-+	AFMT_I2S = 0,
-+	AFMT_SPDIF = 1,
-+	AFMT_UNUSED,
-+};
-+
-+enum {
-+	MODE_DVI,
-+	MODE_HDMI_1_4,
-+	MODE_HDMI_2_0,
-+};
-+
-+struct audio_info {
-+	enum audio_format format;
-+	int sample_rate;
-+	int channels;
-+	int sample_width;
-+};
-+
-+enum vic_pxl_encoding_format {
-+	PXL_RGB = 0x1,
-+	YCBCR_4_4_4 = 0x2,
-+	YCBCR_4_2_2 = 0x4,
-+	YCBCR_4_2_0 = 0x8,
-+	Y_ONLY = 0x10,
-+};
-+
-+struct video_info {
-+	bool h_sync_polarity;
-+	bool v_sync_polarity;
-+	bool interlaced;
-+	int color_depth;
-+	enum vic_pxl_encoding_format color_fmt;
-+};
-+
-+struct cdns_mhdp_host {
-+	unsigned int	link_rate;
-+	u8	lanes_cnt;
-+	u8	volt_swing;
-+	u8	pre_emphasis;
-+	u8	pattern_supp;
-+	u8	fast_link;
-+	u8	lane_mapping;
-+	u8	enhanced;
-+};
-+
-+struct cdns_mhdp_sink {
-+	unsigned int	link_rate;
-+	u8	lanes_cnt;
-+	u8	pattern_supp;
-+	u8	fast_link;
-+	u8	enhanced;
-+};
-+
-+struct cdns_mhdp_bridge;
-+struct cdns_mhdp_connector;
-+
-+struct cdns_mhdp_bridge {
-+	struct cdns_mhdp_device *mhdp;
-+	struct drm_bridge base;
-+	int pbn;
-+	int8_t stream_id;
-+	struct cdns_mhdp_connector *connector;
-+	bool is_active;
-+};
-+
-+struct cdns_mhdp_connector {
-+	struct drm_connector base;
-+	bool is_mst_connector;
-+	struct drm_dp_mst_port *port;
-+	struct cdns_mhdp_bridge *bridge;
-+};
-+
-+struct cdns_mhdp_device {
-+	void __iomem		*regs;
-+
-+	struct device		*dev;
-+
-+	struct cdns_mhdp_connector  connector;
-+	struct clk		*spdif_clk;
-+	struct reset_control	*spdif_rst;
-+
-+	struct platform_device	*audio_pdev;
-+	struct audio_info	audio_info;
-+
-+	struct cdns_mhdp_bridge	bridge;
-+	struct phy		*phy;
-+
-+	struct video_info	video_info;
-+	struct drm_display_mode	mode;
-+	unsigned int		fw_version;
-+
-+	struct drm_dp_mst_topology_mgr mst_mgr;
-+	struct delayed_work hotplug_work;
-+
-+	bool link_up;
-+	bool power_up;
-+	bool plugged;
-+
-+	union {
-+		struct _dp_data {
-+			struct drm_dp_link	link;
-+			struct drm_dp_aux	aux;
-+			struct cdns_mhdp_host	host;
-+			struct cdns_mhdp_sink	sink;
-+			struct cdns_mhdp_mst_cbs cbs;
-+			bool is_mst;
-+			bool can_mst;
-+			u32 lane_mapping;
-+			u32 link_rate;
-+			u32 num_lanes;
-+		} dp;
-+		struct _hdmi_data {
-+			u32 char_rate;
-+			u32 hdmi_type;
-+		} hdmi;
-+	};
-+};
-+
-+void cdns_mhdp_clock_reset(struct cdns_mhdp_device *mhdp);
-+void cdns_mhdp_set_fw_clk(struct cdns_mhdp_device *mhdp, unsigned long clk);
-+int cdns_mhdp_load_firmware(struct cdns_mhdp_device *mhdp, const u32 *i_mem,
-+			    u32 i_size, const u32 *d_mem, u32 d_size);
-+int cdns_mhdp_set_firmware_active(struct cdns_mhdp_device *mhdp, bool enable);
-+int cdns_mhdp_set_host_cap(struct cdns_mhdp_device *mhdp, u8 lanes, bool flip);
-+int cdns_mhdp_event_config(struct cdns_mhdp_device *mhdp);
-+u32 cdns_mhdp_get_event(struct cdns_mhdp_device *mhdp);
-+int cdns_mhdp_get_hpd_status(struct cdns_mhdp_device *mhdp);
-+int cdns_mhdp_dpcd_write(struct cdns_mhdp_device *mhdp, u32 addr, u8 value);
-+int cdns_mhdp_dpcd_read(struct cdns_mhdp_device *mhdp,
-+			u32 addr, u8 *data, u16 len);
-+int cdns_mhdp_get_edid_block(void *mhdp, u8 *edid,
-+			     unsigned int block, size_t length);
-+int cdns_mhdp_train_link(struct cdns_mhdp_device *mhdp);
-+int cdns_mhdp_set_video_status(struct cdns_mhdp_device *mhdp, int active);
-+int cdns_mhdp_config_video(struct cdns_mhdp_device *mhdp);
-+int cdns_mhdp_audio_stop(struct cdns_mhdp_device *mhdp,
-+			 struct audio_info *audio);
-+int cdns_mhdp_audio_mute(struct cdns_mhdp_device *mhdp, bool enable);
-+int cdns_mhdp_audio_config(struct cdns_mhdp_device *mhdp,
-+			   struct audio_info *audio);
-+int cdns_mhdp_reg_read(struct cdns_mhdp_device *mhdp, u32 addr);
-+int cdns_mhdp_reg_write(struct cdns_mhdp_device *mhdp, u32 addr, u32 val);
-+int cdns_mhdp_reg_write_bit(struct cdns_mhdp_device *mhdp, u16 addr,
-+			    u8 start_bit, u8 bits_no, u32 val);
-+int cdns_mhdp_adjust_lt(struct cdns_mhdp_device *mhdp, u8 nlanes,
-+			u16 udelay, u8 *lanes_data,
-+			u8 *dpcd);
-+
-+int cdns_mhdp_read_hpd(struct cdns_mhdp_device *mhdp);
-+u32 cdns_phy_reg_read(struct cdns_mhdp_device *mhdp, u32 addr);
-+int cdns_phy_reg_write(struct cdns_mhdp_device *mhdp, u32 addr, u32 val);
-+int cdns_mhdp_mailbox_send(struct cdns_mhdp_device *mhdp, u8 module_id,
-+				  u8 opcode, u16 size, u8 *message);
-+int cdns_mhdp_mailbox_read_receive(struct cdns_mhdp_device *mhdp,
-+					  u8 *buff, u16 buff_size);
-+int cdns_mhdp_mailbox_validate_receive(struct cdns_mhdp_device *mhdp,
-+					      u8 module_id, u8 opcode,
-+					      u16 req_size);
-+int cdns_mhdp_mailbox_read(struct cdns_mhdp_device *mhdp);
-+
-+int cdns_hdmi_get_edid_block(void *data, u8 *edid, u32 block, size_t length);
-+int cdns_hdmi_scdc_read(struct cdns_mhdp_device *mhdp, u8 addr, u8 *data);
-+int cdns_hdmi_scdc_write(struct cdns_mhdp_device *mhdp, u8 addr, u8 value);
-+int cdns_hdmi_ctrl_init(struct cdns_mhdp_device *mhdp, int protocol, u32 char_rate);
-+int cdns_hdmi_mode_config(struct cdns_mhdp_device *mhdp, struct drm_display_mode *mode,
-+				struct video_info *video_info);
-+int cdns_hdmi_disable_gcp(struct cdns_mhdp_device *mhdp);
-+int cdns_hdmi_enable_gcp(struct cdns_mhdp_device *mhdp);
-+
-+bool cdns_mhdp_check_alive(struct cdns_mhdp_device *mhdp);
-+#endif /* CDNS_MHDP_COMMON_H_ */
diff --git a/target/linux/layerscape/patches-5.4/805-display-0004-drm-bridge-Add-Cadence-DP-HDMI-core-driver.patch b/target/linux/layerscape/patches-5.4/805-display-0004-drm-bridge-Add-Cadence-DP-HDMI-core-driver.patch
deleted file mode 100644
index 3c0daf7daf..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0004-drm-bridge-Add-Cadence-DP-HDMI-core-driver.patch
+++ /dev/null
@@ -1,1417 +0,0 @@
-From 9d6e1670f14a77c092ce32b559de52d7ddea3748 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Fri, 23 Aug 2019 13:57:49 +0800
-Subject: [PATCH] drm: bridge: Add Cadence DP/HDMI core driver
-
-Add HDMI and DP core driver.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/Kconfig          |   6 +
- drivers/gpu/drm/bridge/cadence/Makefile         |   2 +
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c   | 605 ++++++++++++++++++++++
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c | 643 ++++++++++++++++++++++++
- include/drm/bridge/cdns-mhdp-imx.h              | 121 +++++
- 5 files changed, 1377 insertions(+)
- create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
- create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
- create mode 100644 include/drm/bridge/cdns-mhdp-imx.h
-
---- a/drivers/gpu/drm/bridge/cadence/Kconfig
-+++ b/drivers/gpu/drm/bridge/cadence/Kconfig
-@@ -5,3 +5,9 @@ config DRM_CDNS_MHDP
- 	depends on OF
- 	help
- 	  Support Cadence MHDP API library.
-+
-+config DRM_CDNS_HDMI
-+	tristate "Cadence HDMI DRM driver"
-+
-+config DRM_CDNS_DP
-+	tristate "Cadence DP DRM driver"
---- a/drivers/gpu/drm/bridge/cadence/Makefile
-+++ b/drivers/gpu/drm/bridge/cadence/Makefile
-@@ -1,3 +1,5 @@
- #ccflags-y := -Iinclude/drm
- 
- obj-$(CONFIG_DRM_CDNS_MHDP) += cdns-mhdp-common.o cdns-mhdp-hdmi.o
-+obj-$(CONFIG_DRM_CDNS_HDMI) += cdns-hdmi-core.o
-+obj-$(CONFIG_DRM_CDNS_DP) += cdns-dp-core.o
---- /dev/null
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -0,0 +1,605 @@
-+/*
-+ * Cadence Display Port Interface (DP) driver
-+ *
-+ * Copyright (C) 2019 NXP Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#include <drm/bridge/cdns-mhdp-imx.h>
-+#include <drm/drm_atomic_helper.h>
-+#include <drm/drm_crtc_helper.h>
-+#include <drm/drm_edid.h>
-+#include <drm/drm_encoder_slave.h>
-+#include <drm/drm_of.h>
-+#include <drm/drm_probe_helper.h>
-+#include <drm/drmP.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/irq.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/of_device.h>
-+
-+#define aux_to_hdp(x) container_of(x, struct imx_mhdp_device, aux)
-+
-+/*
-+ * This function only implements native DPDC reads and writes
-+ */
-+static ssize_t dp_aux_transfer(struct drm_dp_aux *aux,
-+		struct drm_dp_aux_msg *msg)
-+{
-+	struct cdns_mhdp_device *mhdp = dev_get_drvdata(aux->dev);
-+	bool native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
-+	int ret;
-+
-+	/* Ignore address only message */
-+	if ((msg->size == 0) || (msg->buffer == NULL)) {
-+		msg->reply = native ?
-+			DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
-+		return msg->size;
-+	}
-+
-+	if (!native) {
-+		dev_err(mhdp->dev, "%s: only native messages supported\n", __func__);
-+		return -EINVAL;
-+	}
-+
-+	/* msg sanity check */
-+	if (msg->size > DP_AUX_MAX_PAYLOAD_BYTES) {
-+		dev_err(mhdp->dev, "%s: invalid msg: size(%zu), request(%x)\n",
-+						__func__, msg->size, (unsigned int)msg->request);
-+		return -EINVAL;
-+	}
-+
-+	if (msg->request == DP_AUX_NATIVE_WRITE) {
-+		const u8 *buf = msg->buffer;
-+		int i;
-+		for (i = 0; i < msg->size; ++i) {
-+			ret = cdns_mhdp_dpcd_write(mhdp,
-+						   msg->address + i, buf[i]);
-+			if (!ret)
-+				continue;
-+
-+			DRM_DEV_ERROR(mhdp->dev, "Failed to write DPCD\n");
-+
-+			return ret;
-+		}
-+	}
-+
-+	if (msg->request == DP_AUX_NATIVE_READ) {
-+		ret = cdns_mhdp_dpcd_read(mhdp, msg->address, msg->buffer, msg->size);
-+		if (ret < 0)
-+			return -EIO;
-+		msg->reply = DP_AUX_NATIVE_REPLY_ACK;
-+		return msg->size;
-+	}
-+	return 0;
-+}
-+
-+static int dp_aux_init(struct cdns_mhdp_device *mhdp,
-+		  struct device *dev)
-+{
-+	int ret;
-+
-+	mhdp->dp.aux.name = "imx_dp_aux";
-+	mhdp->dp.aux.dev = dev;
-+	mhdp->dp.aux.transfer = dp_aux_transfer;
-+
-+	ret = drm_dp_aux_register(&mhdp->dp.aux);
-+
-+	return ret;
-+}
-+
-+static int dp_aux_destroy(struct cdns_mhdp_device *mhdp)
-+{
-+	drm_dp_aux_unregister(&mhdp->dp.aux);
-+	return 0;
-+}
-+
-+static void dp_pixel_clk_reset(struct cdns_mhdp_device *mhdp)
-+{
-+	u32 val;
-+
-+	/* reset pixel clk */
-+	val = cdns_mhdp_reg_read(mhdp, SOURCE_HDTX_CAR);
-+	cdns_mhdp_reg_write(mhdp, SOURCE_HDTX_CAR, val & 0xFD);
-+	cdns_mhdp_reg_write(mhdp, SOURCE_HDTX_CAR, val);
-+}
-+
-+static void cdns_dp_mode_set(struct imx_mhdp_device *dp,
-+			const struct drm_display_mode *mode)
-+{
-+	struct drm_dp_link link;
-+	struct cdns_mhdp_device *mhdp = &dp->mhdp;
-+	u32 lane_mapping = mhdp->dp.lane_mapping;
-+	int ret;
-+	char linkid[6];
-+
-+	memcpy(&mhdp->mode, mode, sizeof(struct drm_display_mode));
-+
-+	dp->dual_mode = video_is_dual_mode(mode);
-+
-+	dp_pixel_clk_reset(mhdp);
-+
-+	hdp_plat_call(dp, pclock_change);
-+
-+	hdp_plat_call(dp, phy_init);
-+
-+	ret = drm_dp_downstream_id(&mhdp->dp.aux, linkid);
-+	if (ret < 0) {
-+		DRM_INFO("Failed to Get DP link ID: %d\n", ret);
-+		return;
-+	}
-+	DRM_INFO("DP link id: %s, 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+		 linkid, linkid[0], linkid[1], linkid[2], linkid[3], linkid[4],
-+		 linkid[5]);
-+
-+	/* Check dp link */
-+	ret = drm_dp_link_probe(&mhdp->dp.aux, &link);
-+	if (ret < 0) {
-+		DRM_INFO("Failed to probe DP link: %d\n", ret);
-+		return;
-+	}
-+	DRM_INFO("DP revision: 0x%x\n", link.revision);
-+	DRM_INFO("DP rate: %d Mbps\n", link.rate);
-+	DRM_INFO("DP number of lanes: %d\n", link.num_lanes);
-+	DRM_INFO("DP capabilities: 0x%lx\n", link.capabilities);
-+
-+	drm_dp_link_power_up(&mhdp->dp.aux, &mhdp->dp.link);
-+	if (ret < 0) {
-+		DRM_INFO("Failed to power DP link: %d\n", ret);
-+		return;
-+	}
-+
-+	/* always use the number of lanes from the display*/
-+	mhdp->dp.link.num_lanes = link.num_lanes;
-+
-+	/* Use the lower link rate */
-+	if (mhdp->dp.link_rate != 0) {
-+		mhdp->dp.link.rate = min(mhdp->dp.link_rate, (u32)link.rate);
-+		DRM_DEBUG("DP actual link rate:  0x%x\n", link.rate);
-+	}
-+
-+	/* initialize phy if lanes or link rate differnt */
-+	if (mhdp->dp.link.num_lanes != mhdp->dp.num_lanes ||
-+			mhdp->dp.link.rate != mhdp->dp.link_rate)
-+		hdp_plat_call(dp, phy_init);
-+
-+	/* Video off */
-+	ret = cdns_mhdp_set_video_status(mhdp, CONTROL_VIDEO_IDLE);
-+	if (ret) {
-+		DRM_DEV_ERROR(mhdp->dev, "Failed to valid video %d\n", ret);
-+		return;
-+	}
-+
-+	/* Line swaping */
-+	cdns_mhdp_reg_write(mhdp, LANES_CONFIG, 0x00400000 | lane_mapping);
-+
-+	/* Set DP host capability */
-+	ret = cdns_mhdp_set_host_cap(mhdp, mhdp->dp.link.num_lanes, false);
-+	if (ret) {
-+		DRM_DEV_ERROR(mhdp->dev, "Failed to set host cap %d\n", ret);
-+		return;
-+	}
-+
-+	ret = cdns_mhdp_config_video(mhdp);
-+	if (ret) {
-+		DRM_DEV_ERROR(mhdp->dev, "Failed to config video %d\n", ret);
-+		return;
-+	}
-+
-+	/* Link trainning */
-+	ret = cdns_mhdp_train_link(mhdp);
-+	if (ret) {
-+		DRM_DEV_ERROR(mhdp->dev, "Failed link train %d\n", ret);
-+		return;
-+	}
-+
-+	ret = cdns_mhdp_set_video_status(mhdp, CONTROL_VIDEO_VALID);
-+	if (ret) {
-+		DRM_DEV_ERROR(mhdp->dev, "Failed to valid video %d\n", ret);
-+		return;
-+	}
-+
-+	return;
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * dp TX Setup
-+ */
-+static enum drm_connector_status
-+cdns_dp_connector_detect(struct drm_connector *connector, bool force)
-+{
-+	struct imx_mhdp_device *dp = container_of(connector,
-+					struct imx_mhdp_device, mhdp.connector.base);
-+	u8 hpd = 0xf;
-+
-+	hpd = cdns_mhdp_read_hpd(&dp->mhdp);
-+	if (hpd == 1)
-+		/* Cable Connected */
-+		return connector_status_connected;
-+	else if (hpd == 0)
-+		/* Cable Disconnedted */
-+		return connector_status_disconnected;
-+	else {
-+		/* Cable status unknown */
-+		DRM_INFO("Unknow cable status, hdp=%u\n", hpd);
-+		return connector_status_unknown;
-+	}
-+}
-+
-+static int cdns_dp_connector_get_modes(struct drm_connector *connector)
-+{
-+	struct imx_mhdp_device *dp = container_of(connector,
-+						struct imx_mhdp_device, mhdp.connector.base);
-+	int num_modes = 0;
-+	struct edid *edid;
-+
-+	edid = drm_do_get_edid(&dp->mhdp.connector.base,
-+				   cdns_mhdp_get_edid_block, &dp->mhdp);
-+	if (edid) {
-+		dev_info(dp->mhdp.dev, "%x,%x,%x,%x,%x,%x,%x,%x\n",
-+			 edid->header[0], edid->header[1],
-+			 edid->header[2], edid->header[3],
-+			 edid->header[4], edid->header[5],
-+			 edid->header[6], edid->header[7]);
-+		drm_connector_update_edid_property(connector, edid);
-+		num_modes = drm_add_edid_modes(connector, edid);
-+		kfree(edid);
-+	}
-+
-+	if (num_modes == 0)
-+		DRM_ERROR("Invalid edid\n");
-+	return num_modes;
-+}
-+
-+static const struct drm_connector_funcs cdns_dp_connector_funcs = {
-+	.fill_modes = drm_helper_probe_single_connector_modes,
-+	.detect = cdns_dp_connector_detect,
-+	.destroy = drm_connector_cleanup,
-+	.reset = drm_atomic_helper_connector_reset,
-+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
-+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-+};
-+
-+static const struct drm_connector_helper_funcs cdns_dp_connector_helper_funcs = {
-+	.get_modes = cdns_dp_connector_get_modes,
-+};
-+
-+static int cdns_dp_bridge_attach(struct drm_bridge *bridge)
-+{
-+	struct imx_mhdp_device *dp = bridge->driver_private;
-+	struct drm_encoder *encoder = bridge->encoder;
-+	struct drm_connector *connector = &dp->mhdp.connector.base;
-+
-+	connector->interlace_allowed = 1;
-+	connector->polled = DRM_CONNECTOR_POLL_HPD;
-+
-+	drm_connector_helper_add(connector, &cdns_dp_connector_helper_funcs);
-+
-+	drm_connector_init(bridge->dev, connector, &cdns_dp_connector_funcs,
-+			   DRM_MODE_CONNECTOR_DisplayPort);
-+
-+	drm_connector_attach_encoder(connector, encoder);
-+
-+	return 0;
-+}
-+
-+static enum drm_mode_status
-+cdns_dp_bridge_mode_valid(struct drm_bridge *bridge,
-+			  const struct drm_display_mode *mode)
-+{
-+	enum drm_mode_status mode_status = MODE_OK;
-+
-+	/* We don't support double-clocked modes */
-+	if (mode->flags & DRM_MODE_FLAG_DBLCLK ||
-+			mode->flags & DRM_MODE_FLAG_INTERLACE)
-+		return MODE_BAD;
-+
-+	/* MAX support pixel clock rate 594MHz */
-+	if (mode->clock > 594000)
-+		return MODE_CLOCK_HIGH;
-+
-+	/* 4096x2160 is not supported now */
-+	if (mode->hdisplay > 3840)
-+		return MODE_BAD_HVALUE;
-+
-+	if (mode->vdisplay > 2160)
-+		return MODE_BAD_VVALUE;
-+
-+	return mode_status;
-+}
-+
-+static void cdns_dp_bridge_mode_set(struct drm_bridge *bridge,
-+				    const struct drm_display_mode *orig_mode,
-+				    const struct drm_display_mode *mode)
-+{
-+	struct imx_mhdp_device *dp = bridge->driver_private;
-+	struct drm_display_info *display_info = &dp->mhdp.connector.base.display_info;
-+	struct video_info *video = &dp->mhdp.video_info;
-+
-+	switch (display_info->bpc) {
-+	case 10:
-+		video->color_depth = 10;
-+		break;
-+	case 6:
-+		video->color_depth = 6;
-+		break;
-+	default:
-+		video->color_depth = 8;
-+		break;
-+	}
-+
-+	video->color_fmt = PXL_RGB;
-+	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
-+	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
-+
-+	DRM_INFO("Mode: %dx%dp%d\n", mode->hdisplay, mode->vdisplay, mode->clock); 
-+
-+	mutex_lock(&dp->lock);
-+
-+	cdns_dp_mode_set(dp, mode);
-+
-+	mutex_unlock(&dp->lock);
-+}
-+
-+static void cdn_hdp_bridge_enable(struct drm_bridge *bridge)
-+{
-+}
-+
-+static void cdn_hdp_bridge_disable(struct drm_bridge *bridge)
-+{	
-+	struct imx_mhdp_device *dp = bridge->driver_private;
-+	struct cdns_mhdp_device *mhdp = &dp->mhdp;
-+
-+	cdns_mhdp_set_video_status(mhdp, CONTROL_VIDEO_IDLE);
-+	drm_dp_link_power_down(&mhdp->dp.aux, &mhdp->dp.link);
-+}
-+
-+static const struct drm_bridge_funcs cdns_dp_bridge_funcs = {
-+	.attach = cdns_dp_bridge_attach,
-+	.enable = cdn_hdp_bridge_enable,
-+	.disable = cdn_hdp_bridge_disable,
-+	.mode_set = cdns_dp_bridge_mode_set,
-+	.mode_valid = cdns_dp_bridge_mode_valid,
-+};
-+
-+static void hotplug_work_func(struct work_struct *work)
-+{
-+	struct imx_mhdp_device *dp = container_of(work,
-+					   struct imx_mhdp_device, hotplug_work.work);
-+	struct drm_connector *connector = &dp->mhdp.connector.base;
-+
-+	drm_helper_hpd_irq_event(connector->dev);
-+
-+	if (connector->status == connector_status_connected) {
-+		DRM_INFO("HDMI/DP Cable Plug In\n");
-+		enable_irq(dp->irq[IRQ_OUT]);
-+	} else if (connector->status == connector_status_disconnected) {
-+		/* Cable Disconnedted  */
-+		DRM_INFO("HDMI/DP Cable Plug Out\n");
-+		enable_irq(dp->irq[IRQ_IN]);
-+	}
-+}
-+
-+static irqreturn_t cdns_dp_irq_thread(int irq, void *data)
-+{
-+	struct imx_mhdp_device *dp = data;
-+
-+	disable_irq_nosync(irq);
-+
-+	mod_delayed_work(system_wq, &dp->hotplug_work,
-+			msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS));
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static void cdns_dp_parse_dt(struct cdns_mhdp_device *mhdp)
-+{
-+	struct device_node *of_node = mhdp->dev->of_node;
-+	int ret;
-+
-+	ret = of_property_read_u32(of_node, "lane-mapping",
-+						&mhdp->dp.lane_mapping);
-+	if (ret) {
-+		mhdp->dp.lane_mapping = 0xc6;
-+		dev_warn(mhdp->dev, "Failed to get lane_mapping - using default 0xc6\n");
-+	}
-+	dev_info(mhdp->dev, "lane-mapping 0x%02x\n", mhdp->dp.lane_mapping);
-+
-+	ret = of_property_read_u32(of_node, "link-rate", &mhdp->dp.link_rate);
-+	if (ret) {
-+		mhdp->dp.link_rate = 162000 ;
-+		dev_warn(mhdp->dev, "Failed to get link-rate, use default 1620MHz\n");
-+	}
-+	dev_info(mhdp->dev, "link-rate %d\n", mhdp->dp.link_rate);
-+	
-+	ret = of_property_read_u32(of_node, "num-lanes", &mhdp->dp.num_lanes);
-+	if (ret) {
-+		mhdp->dp.num_lanes = 4;
-+		dev_warn(mhdp->dev, "Failed to get num_lanes - using default\n");
-+	}
-+	dev_info(mhdp->dev, "dp_num_lanes 0x%02x\n", mhdp->dp.num_lanes);
-+
-+	mhdp->dp.link.num_lanes = mhdp->dp.num_lanes;
-+	mhdp->dp.link.rate= mhdp->dp.link_rate;
-+}
-+
-+static struct imx_mhdp_device *
-+__cdns_dp_probe(struct platform_device *pdev,
-+		const struct cdn_plat_data *plat_data)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct imx_mhdp_device *dp;
-+	struct resource *iores = NULL;
-+	int ret;
-+
-+	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
-+	if (!dp)
-+		return ERR_PTR(-ENOMEM);
-+
-+	dp->plat_data = plat_data;
-+	dp->mhdp.dev = dev;
-+
-+	mutex_init(&dp->lock);
-+	mutex_init(&dp->audio_mutex);
-+	spin_lock_init(&dp->audio_lock);
-+
-+	INIT_DELAYED_WORK(&dp->hotplug_work, hotplug_work_func);
-+
-+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	dp->mhdp.regs = devm_ioremap(dev, iores->start, resource_size(iores));
-+	if (IS_ERR(dp->mhdp.regs)) {
-+		ret = PTR_ERR(dp->mhdp.regs);
-+		goto err_out;
-+	}
-+
-+#if 0
-+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+	dp->regs_ss = devm_ioremap(dev, iores->start, resource_size(iores));
-+	if (IS_ERR(dp->regs_ss)) {
-+		ret = PTR_ERR(dp->regs_ss);
-+		goto err_out;
-+	}
-+#endif
-+
-+	dp->irq[IRQ_IN] = platform_get_irq_byname(pdev, "plug_in");
-+	if (dp->irq[IRQ_IN] < 0)
-+		dev_info(&pdev->dev, "No plug_in irq number\n");
-+
-+	dp->irq[IRQ_OUT] = platform_get_irq_byname(pdev, "plug_out");
-+	if (dp->irq[IRQ_OUT] < 0)
-+		dev_info(&pdev->dev, "No plug_out irq number\n");
-+
-+	cdns_dp_parse_dt(&dp->mhdp);
-+
-+	dp->dual_mode = false;
-+	hdp_plat_call(dp, fw_init);
-+
-+	/* DP FW alive check */
-+	ret = cdns_mhdp_check_alive(&dp->mhdp);
-+	if (ret == false) {
-+		DRM_ERROR("NO dp FW running\n");
-+		return ERR_PTR(-ENXIO);
-+	}
-+
-+	/* DP PHY init before AUX init */
-+	hdp_plat_call(dp, phy_init);
-+
-+	/* Enable Hotplug Detect IRQ thread */
-+	irq_set_status_flags(dp->irq[IRQ_IN], IRQ_NOAUTOEN);
-+	ret = devm_request_threaded_irq(dev, dp->irq[IRQ_IN],
-+					NULL, cdns_dp_irq_thread,
-+					IRQF_ONESHOT, dev_name(dev),
-+					dp);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't claim irq %d\n",
-+						dp->irq[IRQ_IN]);
-+		goto err_out;
-+	}
-+	
-+	irq_set_status_flags(dp->irq[IRQ_OUT], IRQ_NOAUTOEN);
-+	ret = devm_request_threaded_irq(dev, dp->irq[IRQ_OUT],
-+					NULL, cdns_dp_irq_thread,
-+					IRQF_ONESHOT, dev_name(dev),
-+					dp);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't claim irq %d\n",
-+						dp->irq[IRQ_OUT]);
-+		goto err_out;
-+	}
-+	if (cdns_mhdp_read_hpd(&dp->mhdp))
-+		enable_irq(dp->irq[IRQ_OUT]);
-+	else
-+		enable_irq(dp->irq[IRQ_IN]);
-+
-+	dp->mhdp.bridge.base.driver_private = dp;
-+	dp->mhdp.bridge.base.funcs = &cdns_dp_bridge_funcs;
-+#ifdef CONFIG_OF
-+	dp->mhdp.bridge.base.of_node = pdev->dev.of_node;
-+#endif
-+
-+	platform_set_drvdata(pdev, dp);
-+	
-+	dp_aux_init(&dp->mhdp, dev);
-+
-+	return dp;
-+
-+err_out:
-+	return ERR_PTR(ret);
-+}
-+
-+static void __cdns_dp_remove(struct imx_mhdp_device *dp)
-+{
-+	dp_aux_destroy(&dp->mhdp);
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Probe/remove API, used from platforms based on the DRM bridge API.
-+ */
-+int cdns_dp_probe(struct platform_device *pdev,
-+		  const struct cdn_plat_data *plat_data)
-+{
-+	struct imx_mhdp_device *dp;
-+
-+	dp = __cdns_dp_probe(pdev, plat_data);
-+	if (IS_ERR(dp))
-+		return PTR_ERR(dp);
-+
-+	drm_bridge_add(&dp->mhdp.bridge.base);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(cdns_dp_probe);
-+
-+void cdns_dp_remove(struct platform_device *pdev)
-+{
-+	struct imx_mhdp_device *dp = platform_get_drvdata(pdev);
-+
-+	drm_bridge_remove(&dp->mhdp.bridge.base);
-+
-+	__cdns_dp_remove(dp);
-+}
-+EXPORT_SYMBOL_GPL(cdns_dp_remove);
-+
-+/* -----------------------------------------------------------------------------
-+ * Bind/unbind API, used from platforms based on the component framework.
-+ */
-+int cdns_dp_bind(struct platform_device *pdev, struct drm_encoder *encoder,
-+		 const struct cdn_plat_data *plat_data)
-+{
-+	struct imx_mhdp_device *dp;
-+	int ret;
-+
-+	dp = __cdns_dp_probe(pdev, plat_data);
-+	if (IS_ERR(dp))
-+		return PTR_ERR(dp);
-+
-+	ret = drm_bridge_attach(encoder, &dp->mhdp.bridge.base, NULL);
-+	if (ret) {
-+		cdns_dp_remove(pdev);
-+		DRM_ERROR("Failed to initialize bridge with drm\n");
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(cdns_dp_bind);
-+
-+void cdns_dp_unbind(struct device *dev)
-+{
-+	struct imx_mhdp_device *dp = dev_get_drvdata(dev);
-+
-+	__cdns_dp_remove(dp);
-+}
-+EXPORT_SYMBOL_GPL(cdns_dp_unbind);
-+
-+MODULE_AUTHOR("Sandor Yu <sandor.yu@nxp.com>");
-+MODULE_DESCRIPTION("Cadence Display Port transmitter driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:cdn-dp");
---- /dev/null
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -0,0 +1,643 @@
-+/*
-+ * Cadence High-Definition Multimedia Interface (HDMI) driver
-+ *
-+ * Copyright (C) 2019 NXP Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#include <drm/bridge/cdns-mhdp-imx.h>
-+#include <drm/drm_atomic_helper.h>
-+#include <drm/drm_crtc_helper.h>
-+#include <drm/drm_edid.h>
-+#include <drm/drm_encoder_slave.h>
-+#include <drm/drm_of.h>
-+#include <drm/drm_probe_helper.h>
-+#include <drm/drmP.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/hdmi.h>
-+#include <linux/irq.h>
-+#include <linux/module.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/mutex.h>
-+#include <linux/regmap.h>
-+#include <linux/of_device.h>
-+
-+static void hdmi_writel(struct cdns_mhdp_device *mhdp, u32 val, u32 offset)
-+{
-+	struct imx_mhdp_device *hdmi = container_of(mhdp, struct imx_mhdp_device, mhdp);
-+
-+	/* TODO */
-+	if (offset >= 0x1000 && hdmi->regmap_csr) {
-+		/* Remap address to low 4K memory */
-+		regmap_write(hdmi->regmap_csr, hdmi->csr_ctrl0_reg, offset >> 12);
-+		writel(val, (offset & 0xfff) + mhdp->regs);
-+		/* Restore address mapping */
-+		regmap_write(hdmi->regmap_csr, hdmi->csr_ctrl0_reg, 0);
-+
-+	} else
-+		writel(val, mhdp->regs + offset);
-+}
-+
-+static int hdmi_sink_config(struct cdns_mhdp_device *mhdp)
-+{
-+	struct drm_scdc *scdc = &mhdp->connector.base.display_info.hdmi.scdc;
-+	u8 buff;
-+	int ret;
-+
-+	if (mhdp->hdmi.char_rate > 340000) {
-+		/*
-+		 * TMDS Character Rate above 340MHz should working in HDMI2.0
-+		 * Enable scrambling and TMDS_Bit_Clock_Ratio
-+		 */
-+		buff = 3;
-+		mhdp->hdmi.hdmi_type = MODE_HDMI_2_0;
-+	} else  if (scdc->scrambling.low_rates) {
-+		/*
-+		 * Enable scrambling and HDMI2.0 when scrambling capability of sink
-+		 * be indicated in the HF-VSDB LTE_340Mcsc_scramble bit
-+		 */
-+		buff = 1;
-+		mhdp->hdmi.hdmi_type = MODE_HDMI_2_0;
-+	} else {
-+		/* Default work in HDMI1.4 */
-+		buff = 0;
-+		mhdp->hdmi.hdmi_type = MODE_HDMI_1_4;
-+	 }
-+
-+	/* TMDS config */
-+	ret = cdns_hdmi_scdc_write(mhdp, 0x20, buff);
-+	return ret;
-+}
-+
-+static int hdmi_lanes_config(struct cdns_mhdp_device *mhdp)
-+{
-+	int ret;
-+
-+	/* TODO */
-+	/* Set the lane swapping */
-+//	if (cpu_is_imx8qm())
-+		ret = cdns_mhdp_reg_write(mhdp, LANES_CONFIG,
-+						    F_SOURCE_PHY_LANE0_SWAP(3) |
-+						    F_SOURCE_PHY_LANE1_SWAP(0) |
-+						    F_SOURCE_PHY_LANE2_SWAP(1) |
-+						    F_SOURCE_PHY_LANE3_SWAP(2) |
-+						    F_SOURCE_PHY_COMB_BYPASS(0) |
-+							F_SOURCE_PHY_20_10(1));
-+#if 0
-+	else
-+		ret = cdns_mhdp_reg_write(mhdp, LANES_CONFIG,
-+						    F_SOURCE_PHY_LANE0_SWAP(0) |
-+						    F_SOURCE_PHY_LANE1_SWAP(1) |
-+						    F_SOURCE_PHY_LANE2_SWAP(2) |
-+						    F_SOURCE_PHY_LANE3_SWAP(3) |
-+						    F_SOURCE_PHY_COMB_BYPASS(0) |
-+							F_SOURCE_PHY_20_10(1));
-+#endif
-+	return ret;
-+}
-+
-+static void hdmi_info_frame_set(struct cdns_mhdp_device *mhdp,
-+					u8 entry_id, u8 packet_len, u8 *packet, u8 packet_type)
-+{
-+	u32 *packet32, len32;
-+	u32 val, i;
-+
-+	/* invalidate entry */
-+	val = F_ACTIVE_IDLE_TYPE(1) | F_PKT_ALLOC_ADDRESS(entry_id);
-+	hdmi_writel(mhdp, val, SOURCE_PIF_PKT_ALLOC_REG);
-+	hdmi_writel(mhdp, F_PKT_ALLOC_WR_EN(1), SOURCE_PIF_PKT_ALLOC_WR_EN);
-+
-+	/* flush fifo 1 */
-+	hdmi_writel(mhdp, F_FIFO1_FLUSH(1), SOURCE_PIF_FIFO1_FLUSH);
-+
-+	/* write packet into memory */
-+	packet32 = (u32 *)packet;
-+	len32 = packet_len / 4;
-+	for (i = 0; i < len32; i++)
-+		hdmi_writel(mhdp, F_DATA_WR(packet32[i]), SOURCE_PIF_DATA_WR);
-+
-+	/* write entry id */
-+	hdmi_writel(mhdp, F_WR_ADDR(entry_id), SOURCE_PIF_WR_ADDR);
-+
-+	/* write request */
-+	hdmi_writel(mhdp, F_HOST_WR(1), SOURCE_PIF_WR_REQ);
-+
-+	/* update entry */
-+	val =  F_ACTIVE_IDLE_TYPE(1) | F_TYPE_VALID(1) |
-+			F_PACKET_TYPE(packet_type) | F_PKT_ALLOC_ADDRESS(entry_id);
-+	hdmi_writel(mhdp, val, SOURCE_PIF_PKT_ALLOC_REG);
-+
-+	hdmi_writel(mhdp, F_PKT_ALLOC_WR_EN(1), SOURCE_PIF_PKT_ALLOC_WR_EN);
-+}
-+
-+#define RGB_ALLOWED_COLORIMETRY (BIT(HDMI_EXTENDED_COLORIMETRY_BT2020) |\
-+				 BIT(HDMI_EXTENDED_COLORIMETRY_OPRGB))
-+#define YCC_ALLOWED_COLORIMETRY (BIT(HDMI_EXTENDED_COLORIMETRY_BT2020) |\
-+				 BIT(HDMI_EXTENDED_COLORIMETRY_BT2020_CONST_LUM) |\
-+				 BIT(HDMI_EXTENDED_COLORIMETRY_OPYCC_601) |\
-+				 BIT(HDMI_EXTENDED_COLORIMETRY_S_YCC_601) |\
-+				 BIT(HDMI_EXTENDED_COLORIMETRY_XV_YCC_709) |\
-+				 BIT(HDMI_EXTENDED_COLORIMETRY_XV_YCC_601))
-+static int hdmi_avi_info_set(struct cdns_mhdp_device *mhdp,
-+				struct drm_display_mode *mode)
-+{
-+	struct hdmi_avi_infoframe frame;
-+//	struct drm_display_info *di = &mhdp->connector.base.display_info;
-+//	enum hdmi_extended_colorimetry ext_col;
-+//	u32 sink_col, allowed_col;
-+	int format = mhdp->video_info.color_fmt;
-+	u8 buf[32];
-+	int ret;
-+
-+	/* Initialise info frame from DRM mode */
-+	drm_hdmi_avi_infoframe_from_display_mode(&frame, &mhdp->connector.base, mode);
-+
-+#if 0 //TODO to DCSS
-+	/* Set up colorimetry */
-+	allowed_col = format == PXL_RGB ? RGB_ALLOWED_COLORIMETRY :
-+						  YCC_ALLOWED_COLORIMETRY;
-+
-+	sink_col = di->hdmi.colorimetry & allowed_col;
-+
-+	if (sink_col & BIT(HDMI_EXTENDED_COLORIMETRY_BT2020))
-+		ext_col = HDMI_EXTENDED_COLORIMETRY_BT2020;
-+	else if (sink_col & BIT(HDMI_EXTENDED_COLORIMETRY_BT2020_CONST_LUM))
-+		ext_col = HDMI_EXTENDED_COLORIMETRY_BT2020_CONST_LUM;
-+	else if (sink_col & BIT(HDMI_EXTENDED_COLORIMETRY_OPRGB))
-+		ext_col = HDMI_EXTENDED_COLORIMETRY_OPRGB;
-+	else if (sink_col & BIT(HDMI_EXTENDED_COLORIMETRY_XV_YCC_709))
-+		ext_col = HDMI_EXTENDED_COLORIMETRY_XV_YCC_709;
-+	else if (sink_col & BIT(HDMI_EXTENDED_COLORIMETRY_OPYCC_601))
-+		ext_col = HDMI_EXTENDED_COLORIMETRY_OPYCC_601;
-+	else if (sink_col & BIT(HDMI_EXTENDED_COLORIMETRY_S_YCC_601))
-+		ext_col = HDMI_EXTENDED_COLORIMETRY_S_YCC_601;
-+	else if (sink_col & BIT(HDMI_EXTENDED_COLORIMETRY_XV_YCC_601))
-+		ext_col = HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
-+	else
-+		ext_col = 0;
-+
-+	frame.colorimetry = sink_col ? HDMI_COLORIMETRY_EXTENDED :
-+					  HDMI_COLORIMETRY_NONE;
-+	frame.extended_colorimetry = ext_col;
-+#endif
-+
-+	switch (format) {
-+	case YCBCR_4_4_4:
-+		frame.colorspace = HDMI_COLORSPACE_YUV444;
-+		break;
-+	case YCBCR_4_2_2:
-+		frame.colorspace = HDMI_COLORSPACE_YUV422;
-+		break;
-+	case YCBCR_4_2_0:
-+		frame.colorspace = HDMI_COLORSPACE_YUV420;
-+		break;
-+	default:
-+		frame.colorspace = HDMI_COLORSPACE_RGB;
-+		break;
-+	}
-+
-+	ret = hdmi_avi_infoframe_pack(&frame, buf + 1, sizeof(buf) - 1);
-+	if (ret < 0) {
-+		DRM_ERROR("failed to pack AVI infoframe: %d\n", ret);
-+		return -1;
-+	}
-+
-+	buf[0] = 0;
-+	hdmi_info_frame_set(mhdp, 0, sizeof(buf), buf, HDMI_INFOFRAME_TYPE_AVI);
-+	return 0;
-+}
-+
-+static int hdmi_vendor_info_set(struct cdns_mhdp_device *mhdp,
-+				struct drm_display_mode *mode)
-+{
-+	struct hdmi_vendor_infoframe frame;
-+	u8 buf[32];
-+	int ret;
-+
-+	/* Initialise vendor frame from DRM mode */
-+	ret = drm_hdmi_vendor_infoframe_from_display_mode(&frame, &mhdp->connector.base, mode);
-+	if (ret < 0) {
-+		DRM_WARN("Unable to init vendor infoframe: %d\n", ret);
-+		return -1;
-+	}
-+
-+	ret = hdmi_vendor_infoframe_pack(&frame, buf + 1, sizeof(buf) - 1);
-+	if (ret < 0) {
-+		DRM_WARN("Unable to pack vendor infoframe: %d\n", ret);
-+		return -1;
-+	}
-+
-+	buf[0] = 0;
-+	hdmi_info_frame_set(mhdp, 3, sizeof(buf), buf, HDMI_INFOFRAME_TYPE_VENDOR);
-+	return 0;
-+}
-+
-+void cdns_hdmi_mode_set(struct cdns_mhdp_device *mhdp)
-+{
-+	struct drm_display_mode *mode = &mhdp->mode;
-+	int ret;
-+
-+	ret = hdmi_sink_config(mhdp);
-+	if (ret < 0) {
-+		DRM_ERROR("%s failed\n", __func__);
-+		return;
-+	}
-+
-+	ret = cdns_hdmi_ctrl_init(mhdp, mhdp->hdmi.hdmi_type, mhdp->hdmi.char_rate);
-+	if (ret < 0) {
-+		DRM_ERROR("%s, ret = %d\n", __func__, ret);
-+		return;
-+	}
-+
-+	/* Config GCP */
-+	if (mhdp->video_info.color_depth == 8)
-+		cdns_hdmi_disable_gcp(mhdp);
-+	else
-+		cdns_hdmi_enable_gcp(mhdp);
-+
-+	ret = hdmi_avi_info_set(mhdp, mode);
-+	if (ret < 0) {
-+		DRM_ERROR("%s ret = %d\n", __func__, ret);
-+		return;
-+	}
-+
-+	/* vendor info frame is enable only  when HDMI1.4 4K mode */
-+	ret = hdmi_vendor_info_set(mhdp, mode);
-+	if (ret < 0)
-+		DRM_WARN("Unable to configure Vendor infoframe\n");
-+
-+	ret = cdns_hdmi_mode_config(mhdp, mode, &mhdp->video_info);
-+	if (ret < 0) {
-+		DRM_ERROR("CDN_API_HDMITX_SetVic_blocking ret = %d\n", ret);
-+		return;
-+	}
-+
-+	/* wait HDMI PHY pixel clock stable */
-+	msleep(50);
-+}
-+
-+static enum drm_connector_status
-+cdns_hdmi_connector_detect(struct drm_connector *connector, bool force)
-+{
-+	struct imx_mhdp_device *hdmi =
-+				container_of(connector, struct imx_mhdp_device, mhdp.connector.base);
-+
-+	u8 hpd = 0xf;
-+
-+	hpd = cdns_mhdp_read_hpd(&hdmi->mhdp);
-+
-+	if (hpd == 1)
-+		/* Cable Connected */
-+		return connector_status_connected;
-+	else if (hpd == 0)
-+		/* Cable Disconnedted */
-+		return connector_status_disconnected;
-+	else {
-+		/* Cable status unknown */
-+		DRM_INFO("Unknow cable status, hdp=%u\n", hpd);
-+		return connector_status_unknown;
-+	}
-+}
-+
-+static int cdns_hdmi_connector_get_modes(struct drm_connector *connector)
-+{
-+	struct imx_mhdp_device *hdmi = container_of(connector, struct imx_mhdp_device,
-+					     mhdp.connector.base);
-+	int num_modes = 0;
-+	struct edid *edid;
-+
-+	edid = drm_do_get_edid(&hdmi->mhdp.connector.base,
-+				   cdns_hdmi_get_edid_block, &hdmi->mhdp);
-+	if (edid) {
-+		dev_info(hdmi->mhdp.dev, "%x,%x,%x,%x,%x,%x,%x,%x\n",
-+			 edid->header[0], edid->header[1],
-+			 edid->header[2], edid->header[3],
-+			 edid->header[4], edid->header[5],
-+			 edid->header[6], edid->header[7]);
-+		drm_connector_update_edid_property(connector, edid);
-+		num_modes = drm_add_edid_modes(connector, edid);
-+		kfree(edid);
-+	}
-+
-+	if (num_modes == 0)
-+		DRM_ERROR("Invalid edid\n");
-+	return num_modes;
-+}
-+
-+static const struct drm_connector_funcs cdns_hdmi_connector_funcs = {
-+	.fill_modes = drm_helper_probe_single_connector_modes,
-+	.detect = cdns_hdmi_connector_detect,
-+	.destroy = drm_connector_cleanup,
-+	.reset = drm_atomic_helper_connector_reset,
-+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
-+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-+};
-+
-+static const struct drm_connector_helper_funcs cdns_hdmi_connector_helper_funcs = {
-+	.get_modes = cdns_hdmi_connector_get_modes,
-+};
-+
-+static int cdns_hdmi_bridge_attach(struct drm_bridge *bridge)
-+{
-+	struct imx_mhdp_device *hdmi = bridge->driver_private;
-+	struct drm_encoder *encoder = bridge->encoder;
-+	struct drm_connector *connector = &hdmi->mhdp.connector.base;
-+
-+	connector->interlace_allowed = 1;
-+	connector->polled = DRM_CONNECTOR_POLL_HPD;
-+
-+	drm_connector_helper_add(connector, &cdns_hdmi_connector_helper_funcs);
-+
-+	drm_connector_init(bridge->dev, connector, &cdns_hdmi_connector_funcs,
-+			   DRM_MODE_CONNECTOR_HDMIA);
-+
-+	drm_connector_attach_encoder(connector, encoder);
-+
-+	return 0;
-+}
-+
-+static enum drm_mode_status
-+cdns_hdmi_bridge_mode_valid(struct drm_bridge *bridge,
-+			  const struct drm_display_mode *mode)
-+{
-+	enum drm_mode_status mode_status = MODE_OK;
-+
-+	/* We don't support double-clocked and Interlaced modes */
-+	if (mode->flags & DRM_MODE_FLAG_DBLCLK ||
-+			mode->flags & DRM_MODE_FLAG_INTERLACE)
-+		return MODE_BAD;
-+
-+	/* MAX support pixel clock rate 148.5MHz */
-+	if (mode->clock > 148500)
-+		return MODE_CLOCK_HIGH;
-+
-+	/* 4096x2160 is not supported */
-+	if (mode->hdisplay > 3840 || mode->vdisplay > 2160)
-+		return MODE_BAD_HVALUE;
-+
-+	return mode_status;
-+}
-+
-+static void cdns_hdmi_bridge_mode_set(struct drm_bridge *bridge,
-+				    const struct drm_display_mode *orig_mode,
-+				    const struct drm_display_mode *mode)
-+{
-+	struct imx_mhdp_device *hdmi = bridge->driver_private;
-+	struct drm_display_info *display_info = &hdmi->mhdp.connector.base.display_info;
-+	struct video_info *video = &hdmi->mhdp.video_info;
-+
-+	switch (display_info->bpc) {
-+	case 10:
-+		video->color_depth = 10;
-+		break;
-+	case 6:
-+		video->color_depth = 6;
-+		break;
-+	default:
-+		video->color_depth = 8;
-+		break;
-+	}
-+
-+	video->color_fmt = PXL_RGB;
-+	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
-+	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
-+
-+	mutex_lock(&hdmi->lock);
-+
-+	DRM_INFO("Mode: %dx%dp%d\n", mode->hdisplay, mode->vdisplay, mode->clock); 
-+
-+	memcpy(&hdmi->mhdp.mode, mode, sizeof(struct drm_display_mode));
-+
-+	hdmi->dual_mode = video_is_dual_mode(mode);
-+
-+	hdmi_lanes_config(&hdmi->mhdp);
-+
-+	hdp_plat_call(hdmi, pclock_change);
-+
-+	hdp_plat_call(hdmi, phy_init);
-+
-+	cdns_hdmi_mode_set(&hdmi->mhdp);
-+
-+	mutex_unlock(&hdmi->lock);
-+}
-+
-+static const struct drm_bridge_funcs cdns_hdmi_bridge_funcs = {
-+	.attach = cdns_hdmi_bridge_attach,
-+	.mode_set = cdns_hdmi_bridge_mode_set,
-+	.mode_valid = cdns_hdmi_bridge_mode_valid,
-+};
-+
-+static void hotplug_work_func(struct work_struct *work)
-+{
-+	struct imx_mhdp_device *hdmi = container_of(work,
-+					   struct imx_mhdp_device, hotplug_work.work);
-+	struct drm_connector *connector = &hdmi->mhdp.connector.base;
-+
-+	drm_helper_hpd_irq_event(connector->dev);
-+
-+	if (connector->status == connector_status_connected) {
-+		/* Cable Connected */
-+		DRM_INFO("HDMI Cable Plug In\n");
-+		enable_irq(hdmi->irq[IRQ_OUT]);
-+	} else if (connector->status == connector_status_disconnected) {
-+		/* Cable Disconnedted  */
-+		DRM_INFO("HDMI Cable Plug Out\n");
-+		enable_irq(hdmi->irq[IRQ_IN]);
-+	}
-+}
-+
-+static irqreturn_t cdns_hdmi_irq_thread(int irq, void *data)
-+{
-+	struct imx_mhdp_device *hdmi = data;
-+
-+	disable_irq_nosync(irq);
-+
-+	mod_delayed_work(system_wq, &hdmi->hotplug_work,
-+			msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS));
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static struct imx_mhdp_device *
-+__cdns_hdmi_probe(struct platform_device *pdev,
-+			const struct cdn_plat_data *plat_data)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct device_node *np = dev->of_node;
-+	struct platform_device_info pdevinfo;
-+	struct imx_mhdp_device *hdmi;
-+	struct resource *iores = NULL;
-+	int ret;
-+
-+	hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
-+	if (!hdmi)
-+		return ERR_PTR(-ENOMEM);
-+
-+	hdmi->plat_data = plat_data;
-+	hdmi->mhdp.dev = dev;
-+
-+	mutex_init(&hdmi->lock);
-+	mutex_init(&hdmi->audio_mutex);
-+	spin_lock_init(&hdmi->audio_lock);
-+
-+	INIT_DELAYED_WORK(&hdmi->hotplug_work, hotplug_work_func);
-+
-+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	hdmi->mhdp.regs = devm_ioremap(dev, iores->start, resource_size(iores));
-+	if (IS_ERR(hdmi->mhdp.regs)) {
-+		ret = PTR_ERR(hdmi->mhdp.regs);
-+		goto err_out;
-+	}
-+
-+	/* csr register base */
-+	hdmi->regmap_csr = syscon_regmap_lookup_by_phandle(np, "csr");
-+	if (IS_ERR(hdmi->regmap_csr)) {
-+		dev_info(dev, "No csr regmap\n");
-+	}
-+
-+	hdmi->irq[IRQ_IN] = platform_get_irq_byname(pdev, "plug_in");
-+	if (hdmi->irq[IRQ_IN] < 0) {
-+		dev_info(&pdev->dev, "No plug_in irq number\n");
-+		return ERR_PTR(-EPROBE_DEFER);
-+	}
-+
-+	hdmi->irq[IRQ_OUT] = platform_get_irq_byname(pdev, "plug_out");
-+	if (hdmi->irq[IRQ_OUT] < 0) {
-+		dev_info(&pdev->dev, "No plug_out irq number\n");
-+		return ERR_PTR(-EPROBE_DEFER);
-+	}
-+
-+	/* Initialize dual_mode to false */
-+	hdmi->dual_mode = false;
-+
-+	/* Initialize FW */
-+	hdp_plat_call(hdmi, fw_init);
-+
-+	/* HDMI FW alive check */
-+	ret = cdns_mhdp_check_alive(&hdmi->mhdp);
-+	if (ret == false) {
-+		DRM_ERROR("NO HDMI FW running\n");
-+		return ERR_PTR(-ENXIO);
-+	}
-+
-+	/* Enable Hotplug Detect thread */
-+	irq_set_status_flags(hdmi->irq[IRQ_IN], IRQ_NOAUTOEN);
-+	ret = devm_request_threaded_irq(dev, hdmi->irq[IRQ_IN],
-+					NULL, cdns_hdmi_irq_thread,
-+					IRQF_ONESHOT, dev_name(dev),
-+					hdmi);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't claim irq %d\n",
-+						hdmi->irq[IRQ_IN]);
-+		goto err_out;
-+	}
-+	
-+	irq_set_status_flags(hdmi->irq[IRQ_OUT], IRQ_NOAUTOEN);
-+	ret = devm_request_threaded_irq(dev, hdmi->irq[IRQ_OUT],
-+					NULL, cdns_hdmi_irq_thread,
-+					IRQF_ONESHOT, dev_name(dev),
-+					hdmi);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't claim irq %d\n",
-+						hdmi->irq[IRQ_OUT]);
-+		goto err_out;
-+	}
-+
-+	if (cdns_mhdp_read_hpd(&hdmi->mhdp))
-+		enable_irq(hdmi->irq[IRQ_OUT]);
-+	else
-+		enable_irq(hdmi->irq[IRQ_IN]);
-+
-+	hdmi->mhdp.bridge.base.driver_private = hdmi;
-+	hdmi->mhdp.bridge.base.funcs = &cdns_hdmi_bridge_funcs;
-+#ifdef CONFIG_OF
-+	hdmi->mhdp.bridge.base.of_node = pdev->dev.of_node;
-+#endif
-+
-+	memset(&pdevinfo, 0, sizeof(pdevinfo));
-+	pdevinfo.parent = dev;
-+	pdevinfo.id = PLATFORM_DEVID_AUTO;
-+
-+	platform_set_drvdata(pdev, hdmi);
-+
-+	return hdmi;
-+
-+err_out:
-+
-+	return ERR_PTR(ret);
-+}
-+
-+static void __cdns_hdmi_remove(struct imx_mhdp_device *hdmi)
-+{
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Probe/remove API, used from platforms based on the DRM bridge API.
-+ */
-+int cdns_hdmi_probe(struct platform_device *pdev,
-+		  const struct cdn_plat_data *plat_data)
-+{
-+	struct imx_mhdp_device *hdmi;
-+
-+	hdmi = __cdns_hdmi_probe(pdev, plat_data);
-+	if (IS_ERR(hdmi))
-+		return PTR_ERR(hdmi);
-+
-+	drm_bridge_add(&hdmi->mhdp.bridge.base);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(cdns_hdmi_probe);
-+
-+void cdns_hdmi_remove(struct platform_device *pdev)
-+{
-+	struct imx_mhdp_device *hdmi = platform_get_drvdata(pdev);
-+
-+	drm_bridge_remove(&hdmi->mhdp.bridge.base);
-+
-+	__cdns_hdmi_remove(hdmi);
-+}
-+EXPORT_SYMBOL_GPL(cdns_hdmi_remove);
-+
-+/* -----------------------------------------------------------------------------
-+ * Bind/unbind API, used from platforms based on the component framework.
-+ */
-+int cdns_hdmi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
-+		 const struct cdn_plat_data *plat_data)
-+{
-+	struct imx_mhdp_device *hdmi;
-+	int ret;
-+
-+	hdmi = __cdns_hdmi_probe(pdev, plat_data);
-+	if (IS_ERR(hdmi))
-+		return PTR_ERR(hdmi);
-+
-+	ret = drm_bridge_attach(encoder, &hdmi->mhdp.bridge.base, NULL);
-+	if (ret) {
-+		cdns_hdmi_remove(pdev);
-+		DRM_ERROR("Failed to initialize bridge with drm\n");
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(cdns_hdmi_bind);
-+
-+void cdns_hdmi_unbind(struct device *dev)
-+{
-+	struct imx_mhdp_device *hdmi = dev_get_drvdata(dev);
-+
-+	__cdns_hdmi_remove(hdmi);
-+}
-+EXPORT_SYMBOL_GPL(cdns_hdmi_unbind);
-+
-+MODULE_AUTHOR("Sandor Yu <sandor.yu@nxp.com>");
-+MODULE_DESCRIPTION("Cadence HDMI transmitter driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:cdn-hdmi");
---- /dev/null
-+++ b/include/drm/bridge/cdns-mhdp-imx.h
-@@ -0,0 +1,121 @@
-+/*
-+ * Cadence High-Definition Multimedia Interface (HDMI) driver
-+ *
-+ * Copyright (C) 2019 NXP Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+#ifndef CDNS_MHDP_IMX_H_
-+#define CDNS_MHDP_IMX_H_
-+
-+#include <drm/bridge/cdns-mhdp-common.h>
-+
-+#define IRQ_IN    0
-+#define IRQ_OUT   1
-+#define IRQ_NUM   2
-+
-+#define hdp_plat_call(hdp, operation)			\
-+	(!(hdp) ? -ENODEV : (((hdp)->plat_data && (hdp)->plat_data->operation) ?	\
-+	 (hdp)->plat_data->operation(hdp) : ENOIOCTLCMD))
-+
-+#define HDP_DUAL_MODE_MIN_PCLK_RATE	300000	/* KHz */
-+#define HDP_SINGLE_MODE_MAX_WIDTH	1920
-+
-+static inline bool video_is_dual_mode(const struct drm_display_mode *mode)
-+{
-+	return (mode->clock > HDP_DUAL_MODE_MIN_PCLK_RATE ||
-+		mode->hdisplay > HDP_SINGLE_MODE_MAX_WIDTH) ? true : false;
-+}
-+
-+struct imx_mhdp_device;
-+
-+struct imx_hdp_clks {
-+	struct clk *av_pll;
-+	struct clk *dig_pll;
-+	struct clk *clk_ipg;
-+	struct clk *clk_core;
-+	struct clk *clk_pxl;
-+	struct clk *clk_pxl_mux;
-+	struct clk *clk_pxl_link;
-+
-+	struct clk *lpcg_hdp;
-+	struct clk *lpcg_msi;
-+	struct clk *lpcg_pxl;
-+	struct clk *lpcg_vif;
-+	struct clk *lpcg_lis;
-+	struct clk *lpcg_apb;
-+	struct clk *lpcg_apb_csr;
-+	struct clk *lpcg_apb_ctrl;
-+
-+	struct clk *lpcg_i2s;
-+	struct clk *clk_i2s_bypass;
-+};
-+
-+struct cdn_plat_data {
-+	/* Vendor PHY support */
-+	int (*phy_init)(struct imx_mhdp_device *hdmi);
-+	int (*bind)(struct platform_device *pdev,
-+			struct drm_encoder *encoder,
-+		 	const struct cdn_plat_data *plat_data);
-+	void (*unbind)(struct device *dev);
-+	int (*fw_init)(struct imx_mhdp_device *hdp);
-+	void (*pclock_change)(struct imx_mhdp_device *hdp);
-+	char is_dp;
-+};
-+
-+struct imx_mhdp_device {
-+	struct cdns_mhdp_device mhdp;
-+
-+	struct mutex lock;
-+	struct mutex audio_mutex;
-+	spinlock_t audio_lock;
-+	bool connected;
-+	bool active;
-+	bool suspended;
-+	struct imx_hdp_clks clks;
-+
-+	const struct cdn_plat_data *plat_data;
-+
-+	int irq[IRQ_NUM];
-+	struct delayed_work hotplug_work;
-+	//void __iomem *regmap_csr;
-+	struct regmap *regmap_csr;
-+	u32 csr_pxl_mux_reg;
-+	u32 csr_ctrl0_reg;
-+	u32 csr_ctrl0_sec;
-+
-+	struct audio_info audio_info;
-+	bool sink_has_audio;
-+	u32 dual_mode;
-+
-+	struct device		*pd_mhdp_dev;
-+	struct device		*pd_pll0_dev;
-+	struct device		*pd_pll1_dev;
-+	struct device_link	*pd_mhdp_link;
-+	struct device_link	*pd_pll0_link;
-+	struct device_link	*pd_pll1_link;
-+
-+	u32 phy_init;
-+};
-+
-+int cdns_hdmi_probe(struct platform_device *pdev,
-+		  const struct cdn_plat_data *plat_data);
-+void cdns_hdmi_remove(struct platform_device *pdev);
-+void cdns_hdmi_unbind(struct device *dev);
-+int cdns_hdmi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
-+		 const struct cdn_plat_data *plat_data);
-+void cdns_hdmi_set_sample_rate(struct imx_mhdp_device *hdmi, unsigned int rate);
-+void cdns_hdmi_audio_enable(struct imx_mhdp_device *hdmi);
-+void cdns_hdmi_audio_disable(struct imx_mhdp_device *hdmi);
-+int cdns_dp_probe(struct platform_device *pdev,
-+		  const struct cdn_plat_data *plat_data);
-+void cdns_dp_remove(struct platform_device *pdev);
-+void cdns_dp_unbind(struct device *dev);
-+int cdns_dp_bind(struct platform_device *pdev, struct drm_encoder *encoder,
-+		 const struct cdn_plat_data *plat_data);
-+
-+#endif /* CDNS_MHDP_IMX_H_ */
diff --git a/target/linux/layerscape/patches-5.4/805-display-0005-gpu-drm-Add-imx8qm-mq-DP-HDMI-driver.patch b/target/linux/layerscape/patches-5.4/805-display-0005-gpu-drm-Add-imx8qm-mq-DP-HDMI-driver.patch
deleted file mode 100644
index f4e428bee0..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0005-gpu-drm-Add-imx8qm-mq-DP-HDMI-driver.patch
+++ /dev/null
@@ -1,2307 +0,0 @@
-From 1433ad0f114ec80b524768af8ec96e09a5bba9b2 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Fri, 23 Aug 2019 14:05:16 +0800
-Subject: [PATCH] gpu: drm: Add imx8qm/mq DP/HDMI driver
-
-Add imx8qm/mq DP/hdmi driver
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/imx/Kconfig             |   9 +
- drivers/gpu/drm/imx/Makefile            |   1 +
- drivers/gpu/drm/imx/cdn-mhdp-dp-phy.c   | 533 ++++++++++++++++++++++++
- drivers/gpu/drm/imx/cdn-mhdp-hdmi-phy.c | 684 ++++++++++++++++++++++++++++++
- drivers/gpu/drm/imx/cdn-mhdp-imx8mq.c   | 163 ++++++++
- drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c   | 714 ++++++++++++++++++++++++++++++++
- drivers/gpu/drm/imx/cdn-mhdp-phy.h      | 153 +++++++
- 7 files changed, 2257 insertions(+)
- create mode 100644 drivers/gpu/drm/imx/cdn-mhdp-dp-phy.c
- create mode 100644 drivers/gpu/drm/imx/cdn-mhdp-hdmi-phy.c
- create mode 100644 drivers/gpu/drm/imx/cdn-mhdp-imx8mq.c
- create mode 100644 drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c
- create mode 100644 drivers/gpu/drm/imx/cdn-mhdp-phy.h
-
---- a/drivers/gpu/drm/imx/Kconfig
-+++ b/drivers/gpu/drm/imx/Kconfig
-@@ -39,3 +39,12 @@ config DRM_IMX_HDMI
- 	depends on DRM_IMX
- 	help
- 	  Choose this if you want to use HDMI on i.MX6.
-+
-+config DRM_IMX_CDNS_MHDP
-+	tristate "NXP i.MX MX8 DRM HDMI/DP"
-+	select DRM_CDNS_MHDP
-+	select DRM_CDNS_DP
-+	select DRM_CDNS_HDMI
-+	depends on DRM_IMX
-+	help
-+	  Choose this if you want to use HDMI on i.MX8.
---- a/drivers/gpu/drm/imx/Makefile
-+++ b/drivers/gpu/drm/imx/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_DRM_IMX_TVE) += imx-tve.o
- obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o
- 
- obj-$(CONFIG_DRM_IMX_HDMI) += dw_hdmi-imx.o
-+obj-$(CONFIG_DRM_IMX_CDNS_MHDP) += cdn-mhdp-imx8qm.o cdn-mhdp-imx8mq.o cdn-mhdp-dp-phy.o cdn-mhdp-hdmi-phy.o
---- /dev/null
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-dp-phy.c
-@@ -0,0 +1,533 @@
-+/*
-+ * Cadence Display Port Interface (DP) PHY driver
-+ *
-+ * Copyright (C) 2019 NXP Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+#include <linux/clk.h>
-+#include <linux/kernel.h>
-+#include <drm/drm_dp_helper.h>
-+
-+#include <drm/bridge/cdns-mhdp-common.h>
-+#include "cdn-mhdp-phy.h"
-+
-+enum dp_link_rate {
-+	RATE_1_6 = 162000,
-+	RATE_2_1 = 216000,
-+	RATE_2_4 = 243000,
-+	RATE_2_7 = 270000,
-+	RATE_3_2 = 324000,
-+	RATE_4_3 = 432000,
-+	RATE_5_4 = 540000,
-+	RATE_8_1 = 810000,
-+};
-+
-+struct phy_pll_reg {
-+	u16 val[7];
-+	u32 addr;
-+};
-+
-+static const struct phy_pll_reg phy_pll_27m_cfg[] = {
-+	/*  1.62    2.16    2.43    2.7     3.24    4.32    5.4      register address */
-+	{{ 0x010E, 0x010E, 0x010E, 0x010E, 0x010E, 0x010E, 0x010E }, CMN_PLL0_VCOCAL_INIT_TMR },
-+	{{ 0x001B, 0x001B, 0x001B, 0x001B, 0x001B, 0x001B, 0x001B }, CMN_PLL0_VCOCAL_ITER_TMR },
-+	{{ 0x30B9, 0x3087, 0x3096, 0x30B4, 0x30B9, 0x3087, 0x30B4 }, CMN_PLL0_VCOCAL_START },
-+	{{ 0x0077, 0x009F, 0x00B3, 0x00C7, 0x0077, 0x009F, 0x00C7 }, CMN_PLL0_INTDIV },
-+	{{ 0xF9DA, 0xF7CD, 0xF6C7, 0xF5C1, 0xF9DA, 0xF7CD, 0xF5C1 }, CMN_PLL0_FRACDIV },
-+	{{ 0x001E, 0x0028, 0x002D, 0x0032, 0x001E, 0x0028, 0x0032 }, CMN_PLL0_HIGH_THR },
-+	{{ 0x0020, 0x0020, 0x0020, 0x0020, 0x0020, 0x0020, 0x0020 }, CMN_PLL0_DSM_DIAG },
-+	{{ 0x0000, 0x1000, 0x1000, 0x1000, 0x0000, 0x1000, 0x1000 }, CMN_PLLSM0_USER_DEF_CTRL },
-+	{{ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 }, CMN_DIAG_PLL0_OVRD },
-+	{{ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 }, CMN_DIAG_PLL0_FBH_OVRD },
-+	{{ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 }, CMN_DIAG_PLL0_FBL_OVRD },
-+	{{ 0x0006, 0x0007, 0x0007, 0x0007, 0x0006, 0x0007, 0x0007 }, CMN_DIAG_PLL0_V2I_TUNE },
-+	{{ 0x0043, 0x0043, 0x0043, 0x0042, 0x0043, 0x0043, 0x0042 }, CMN_DIAG_PLL0_CP_TUNE },
-+	{{ 0x0008, 0x0008, 0x0008, 0x0008, 0x0008, 0x0008, 0x0008 }, CMN_DIAG_PLL0_LF_PROG },
-+	{{ 0x0100, 0x0001, 0x0001, 0x0001, 0x0100, 0x0001, 0x0001 }, CMN_DIAG_PLL0_PTATIS_TUNE1 },
-+	{{ 0x0007, 0x0001, 0x0001, 0x0001, 0x0007, 0x0001, 0x0001 }, CMN_DIAG_PLL0_PTATIS_TUNE2 },
-+	{{ 0x0020, 0x0020, 0x0020, 0x0020, 0x0020, 0x0020, 0x0020 }, CMN_DIAG_PLL0_TEST_MODE},
-+	{{ 0x0016, 0x0016, 0x0016, 0x0016, 0x0016, 0x0016, 0x0016 }, CMN_PSM_CLK_CTRL }
-+};
-+
-+static const struct phy_pll_reg phy_pll_24m_cfg[] = {
-+	/*  1.62    2.16    2.43    2.7     3.24    4.32    5.4      register address */
-+	{{ 0x00F0, 0x00F0, 0x00F0, 0x00F0, 0x00F0, 0x00F0, 0x00F0 }, CMN_PLL0_VCOCAL_INIT_TMR },
-+	{{ 0x0018, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018 }, CMN_PLL0_VCOCAL_ITER_TMR },
-+	{{ 0x3061, 0x3092, 0x30B3, 0x30D0, 0x3061, 0x3092, 0x30D0 }, CMN_PLL0_VCOCAL_START },
-+	{{ 0x0086, 0x00B3, 0x00CA, 0x00E0, 0x0086, 0x00B3, 0x00E0 }, CMN_PLL0_INTDIV },
-+	{{ 0xF917, 0xF6C7, 0x75A1, 0xF479, 0xF917, 0xF6C7, 0xF479 }, CMN_PLL0_FRACDIV },
-+	{{ 0x0022, 0x002D, 0x0033, 0x0038, 0x0022, 0x002D, 0x0038 }, CMN_PLL0_HIGH_THR },
-+	{{ 0x0020, 0x0020, 0x0020, 0x0020, 0x0020, 0x0020, 0x0020 }, CMN_PLL0_DSM_DIAG },
-+	{{ 0x0000, 0x1000, 0x1000, 0x1000, 0x0000, 0x1000, 0x1000 }, CMN_PLLSM0_USER_DEF_CTRL },
-+	{{ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 }, CMN_DIAG_PLL0_OVRD },
-+	{{ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 }, CMN_DIAG_PLL0_FBH_OVRD },
-+	{{ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 }, CMN_DIAG_PLL0_FBL_OVRD },
-+	{{ 0x0006, 0x0007, 0x0007, 0x0007, 0x0006, 0x0007, 0x0007 }, CMN_DIAG_PLL0_V2I_TUNE },
-+	{{ 0x0026, 0x0029, 0x0029, 0x0029, 0x0026, 0x0029, 0x0029 }, CMN_DIAG_PLL0_CP_TUNE },
-+	{{ 0x0008, 0x0008, 0x0008, 0x0008, 0x0008, 0x0008, 0x0008 }, CMN_DIAG_PLL0_LF_PROG },
-+	{{ 0x008C, 0x008C, 0x008C, 0x008C, 0x008C, 0x008C, 0x008C }, CMN_DIAG_PLL0_PTATIS_TUNE1 },
-+	{{ 0x002E, 0x002E, 0x002E, 0x002E, 0x002E, 0x002E, 0x002E }, CMN_DIAG_PLL0_PTATIS_TUNE2 },
-+	{{ 0x0022, 0x0022, 0x0022, 0x0022, 0x0022, 0x0022, 0x0022 }, CMN_DIAG_PLL0_TEST_MODE},
-+	{{ 0x0016, 0x0016, 0x0016, 0x0016, 0x0016, 0x0016, 0x0016 }, CMN_PSM_CLK_CTRL }
-+};
-+
-+static int link_rate_index(u32 rate)
-+{
-+	switch (rate) {
-+	case RATE_1_6:
-+		return 0;
-+	case RATE_2_1:
-+		return 1;
-+	case RATE_2_4:
-+		return 2;
-+	case RATE_2_7:
-+		return 3;
-+	case RATE_3_2:
-+		return 4;
-+	case RATE_4_3:
-+		return 5;
-+	case RATE_5_4:
-+		return 6;
-+	default:
-+		return -1;
-+	}
-+}
-+
-+static void dp_aux_cfg(struct cdns_mhdp_device *mhdp)
-+{
-+	/* Power up Aux */
-+	cdns_phy_reg_write(mhdp, TXDA_CYA_AUXDA_CYA, 1);
-+
-+	cdns_phy_reg_write(mhdp, TX_DIG_CTRL_REG_2, 36);
-+	ndelay(150);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_2, 0x0100);
-+	ndelay(150);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_2, 0x0300);
-+	ndelay(150);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_3, 0x0000);
-+	ndelay(150);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, 0x2008);
-+	ndelay(150);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, 0x2018);
-+	ndelay(150);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, 0xA018);
-+	ndelay(150);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_2, 0x030C);
-+	ndelay(150);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_5, 0x0000);
-+	ndelay(150);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_4, 0x1001);
-+	ndelay(150);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, 0xA098);
-+	ndelay(150);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, 0xA198);
-+	ndelay(150);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_2, 0x030d);
-+	ndelay(150);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_2, 0x030f);
-+}
-+
-+/* PMA common configuration for 24MHz */
-+static void dp_phy_pma_cmn_cfg_24mhz(struct cdns_mhdp_device *mhdp)
-+{
-+	int k;
-+	u32 num_lanes = mhdp->dp.link.num_lanes;
-+	u16 val;
-+
-+	val = cdns_phy_reg_read(mhdp, PHY_PMA_CMN_CTRL1);
-+	val &= 0xFFF7;
-+	val |= 0x0008;
-+	cdns_phy_reg_write(mhdp, PHY_PMA_CMN_CTRL1, val);
-+
-+	for (k = 0; k < num_lanes; k++) {
-+		/* Transceiver control and diagnostic registers */
-+		cdns_phy_reg_write(mhdp, XCVR_DIAG_LANE_FCM_EN_MGN_TMR | (k << 9), 0x0090);
-+		/* Transmitter receiver detect registers */
-+		cdns_phy_reg_write(mhdp, TX_RCVDET_EN_TMR | (k << 9), 0x0960);
-+		cdns_phy_reg_write(mhdp, TX_RCVDET_ST_TMR | (k << 9), 0x0030);
-+	}
-+}
-+
-+/* Valid for 24 MHz only */
-+static void dp_phy_pma_cmn_pll0_24mhz(struct cdns_mhdp_device *mhdp)
-+{
-+	u32 num_lanes = mhdp->dp.link.num_lanes;
-+	u32 link_rate = mhdp->dp.link.rate;
-+	u16 val;
-+	int index, i, k;
-+
-+	/*
-+	 * PLL reference clock source select
-+	 * for single ended reference clock val |= 0x0030;
-+	 * for differential clock  val |= 0x0000;
-+	 */
-+	val = cdns_phy_reg_read(mhdp, PHY_PMA_CMN_CTRL1);
-+	val = val & 0xFF8F;
-+	val = val | 0x0030;
-+	cdns_phy_reg_write(mhdp, PHY_PMA_CMN_CTRL1, val);
-+
-+	/* DP PLL data rate 0/1 clock divider value */
-+	val = cdns_phy_reg_read(mhdp, PHY_HDP_CLK_CTL);
-+	val &= 0x00FF;
-+	if (link_rate <= RATE_2_7)
-+		val |= 0x2400;
-+	else
-+		val |= 0x1200;
-+	cdns_phy_reg_write(mhdp, PHY_HDP_CLK_CTL, val);
-+
-+	/* High speed clock 0/1 div */
-+	val = cdns_phy_reg_read(mhdp, CMN_DIAG_HSCLK_SEL);
-+	val &= 0xFFCC;
-+	if (link_rate <= RATE_2_7)
-+		val |= 0x0011;
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_HSCLK_SEL, val);
-+
-+	for (k = 0; k < num_lanes; k = k + 1) {
-+		val = cdns_phy_reg_read(mhdp, (XCVR_DIAG_HSCLK_SEL | (k << 9)));
-+		val &= 0xCFFF;
-+		if (link_rate <= RATE_2_7)
-+			val |= 0x1000;
-+		cdns_phy_reg_write(mhdp, (XCVR_DIAG_HSCLK_SEL | (k << 9)), val);
-+	}
-+
-+	/* DP PHY PLL 24MHz configuration */
-+	index = link_rate_index(link_rate);
-+	for (i = 0; i < ARRAY_SIZE(phy_pll_24m_cfg); i++)
-+		cdns_phy_reg_write(mhdp, phy_pll_24m_cfg[i].addr, phy_pll_24m_cfg[i].val[index]);
-+
-+	/* Transceiver control and diagnostic registers */
-+	for (k = 0; k < num_lanes; k = k + 1) {
-+		val = cdns_phy_reg_read(mhdp, (XCVR_DIAG_PLLDRC_CTRL | (k << 9)));
-+		val &= 0x8FFF;
-+		if (link_rate <= RATE_2_7)
-+			val |= 0x2000;
-+		else
-+			val |= 0x1000;
-+		cdns_phy_reg_write(mhdp, (XCVR_DIAG_PLLDRC_CTRL | (k << 9)), val);
-+	}
-+
-+	for (k = 0; k < num_lanes; k = k + 1) {
-+		cdns_phy_reg_write(mhdp, (XCVR_PSM_RCTRL | (k << 9)), 0xBEFC);
-+		cdns_phy_reg_write(mhdp, (TX_PSC_A0 | (k << 9)), 0x6799);
-+		cdns_phy_reg_write(mhdp, (TX_PSC_A1 | (k << 9)), 0x6798);
-+		cdns_phy_reg_write(mhdp, (TX_PSC_A2 | (k << 9)), 0x0098);
-+		cdns_phy_reg_write(mhdp, (TX_PSC_A3 | (k << 9)), 0x0098);
-+	}
-+}
-+
-+/* PMA common configuration for 27MHz */
-+static void dp_phy_pma_cmn_cfg_27mhz(struct cdns_mhdp_device *mhdp)
-+{
-+	u32 num_lanes = mhdp->dp.link.num_lanes;
-+	u16 val;
-+	int k;
-+
-+	val = cdns_phy_reg_read(mhdp, PHY_PMA_CMN_CTRL1);
-+	val &= 0xFFF7;
-+	val |= 0x0008;
-+	cdns_phy_reg_write(mhdp, PHY_PMA_CMN_CTRL1, val);
-+
-+	/* Startup state machine registers */
-+	cdns_phy_reg_write(mhdp, CMN_SSM_BIAS_TMR, 0x0087);
-+	cdns_phy_reg_write(mhdp, CMN_PLLSM0_PLLEN_TMR, 0x001B);
-+	cdns_phy_reg_write(mhdp, CMN_PLLSM0_PLLPRE_TMR, 0x0036);
-+	cdns_phy_reg_write(mhdp, CMN_PLLSM0_PLLVREF_TMR, 0x001B);
-+	cdns_phy_reg_write(mhdp, CMN_PLLSM0_PLLLOCK_TMR, 0x006C);
-+
-+	/* Current calibration registers */
-+	cdns_phy_reg_write(mhdp, CMN_ICAL_INIT_TMR, 0x0044);
-+	cdns_phy_reg_write(mhdp, CMN_ICAL_ITER_TMR, 0x0006);
-+	cdns_phy_reg_write(mhdp, CMN_ICAL_ADJ_INIT_TMR, 0x0022);
-+	cdns_phy_reg_write(mhdp, CMN_ICAL_ADJ_ITER_TMR, 0x0006);
-+
-+	/* Resistor calibration registers */
-+	cdns_phy_reg_write(mhdp, CMN_TXPUCAL_INIT_TMR, 0x0022);
-+	cdns_phy_reg_write(mhdp, CMN_TXPUCAL_ITER_TMR, 0x0006);
-+	cdns_phy_reg_write(mhdp, CMN_TXPU_ADJ_INIT_TMR, 0x0022);
-+	cdns_phy_reg_write(mhdp, CMN_TXPU_ADJ_ITER_TMR, 0x0006);
-+	cdns_phy_reg_write(mhdp, CMN_TXPDCAL_INIT_TMR, 0x0022);
-+	cdns_phy_reg_write(mhdp, CMN_TXPDCAL_ITER_TMR, 0x0006);
-+	cdns_phy_reg_write(mhdp, CMN_TXPD_ADJ_INIT_TMR, 0x0022);
-+	cdns_phy_reg_write(mhdp, CMN_TXPD_ADJ_ITER_TMR, 0x0006);
-+	cdns_phy_reg_write(mhdp, CMN_RXCAL_INIT_TMR, 0x0022);
-+	cdns_phy_reg_write(mhdp, CMN_RXCAL_ITER_TMR, 0x0006);
-+	cdns_phy_reg_write(mhdp, CMN_RX_ADJ_INIT_TMR, 0x0022);
-+	cdns_phy_reg_write(mhdp, CMN_RX_ADJ_ITER_TMR, 0x0006);
-+
-+	for (k = 0; k < num_lanes; k = k + 1) {
-+		/* Power state machine registers */
-+		cdns_phy_reg_write(mhdp, XCVR_PSM_CAL_TMR  | (k << 9), 0x016D);
-+		cdns_phy_reg_write(mhdp, XCVR_PSM_A0IN_TMR | (k << 9), 0x016D);
-+		/* Transceiver control and diagnostic registers */
-+		cdns_phy_reg_write(mhdp, XCVR_DIAG_LANE_FCM_EN_MGN_TMR | (k << 9), 0x00A2);
-+		cdns_phy_reg_write(mhdp, TX_DIAG_BGREF_PREDRV_DELAY    | (k << 9), 0x0097);
-+		/* Transmitter receiver detect registers */
-+		cdns_phy_reg_write(mhdp, TX_RCVDET_EN_TMR | (k << 9), 0x0A8C);
-+		cdns_phy_reg_write(mhdp, TX_RCVDET_ST_TMR | (k << 9), 0x0036);
-+	}
-+}
-+
-+static void dp_phy_pma_cmn_pll0_27mhz(struct cdns_mhdp_device *mhdp)
-+{
-+	u32 num_lanes = mhdp->dp.link.num_lanes;
-+	u32 link_rate = mhdp->dp.link.rate;
-+	u16 val;
-+	int index, i, k;
-+
-+	/*
-+	 * PLL reference clock source select
-+	 * for single ended reference clock val |= 0x0030;
-+	 * for differential clock  val |= 0x0000;
-+	 */
-+	val = cdns_phy_reg_read(mhdp, PHY_PMA_CMN_CTRL1);
-+	val &= 0xFF8F;
-+	cdns_phy_reg_write(mhdp, PHY_PMA_CMN_CTRL1, val);
-+
-+	/* for differential clock on the refclk_p and refclk_m off chip pins:
-+	 * CMN_DIAG_ACYA[8]=1'b1
-+	 */
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_ACYA, 0x0100);
-+
-+	/* DP PLL data rate 0/1 clock divider value */
-+	val = cdns_phy_reg_read(mhdp, PHY_HDP_CLK_CTL);
-+	val &= 0x00FF;
-+	if (link_rate <= RATE_2_7)
-+		val |= 0x2400;
-+	else
-+		val |= 0x1200;
-+	cdns_phy_reg_write(mhdp, PHY_HDP_CLK_CTL, val);
-+
-+	/* High speed clock 0/1 div */
-+	val = cdns_phy_reg_read(mhdp, CMN_DIAG_HSCLK_SEL);
-+	val &= 0xFFCC;
-+	if (link_rate <= RATE_2_7)
-+		val |= 0x0011;
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_HSCLK_SEL, val);
-+
-+	for (k = 0; k < num_lanes; k++) {
-+		val = cdns_phy_reg_read(mhdp, (XCVR_DIAG_HSCLK_SEL | (k << 9)));
-+		val = val & 0xCFFF;
-+		if (link_rate <= RATE_2_7)
-+			val |= 0x1000;
-+		cdns_phy_reg_write(mhdp, (XCVR_DIAG_HSCLK_SEL | (k << 9)), val);
-+	}
-+
-+	/* DP PHY PLL 27MHz configuration */
-+	index = link_rate_index(link_rate);
-+	for (i = 0; i < ARRAY_SIZE(phy_pll_27m_cfg); i++)
-+		cdns_phy_reg_write(mhdp, phy_pll_27m_cfg[i].addr, phy_pll_27m_cfg[i].val[index]);
-+
-+	/* Transceiver control and diagnostic registers */
-+	for (k = 0; k < num_lanes; k++) {
-+		val = cdns_phy_reg_read(mhdp, (XCVR_DIAG_PLLDRC_CTRL | (k << 9)));
-+		val = val & 0x8FFF;
-+		if (link_rate <= RATE_2_7)
-+			val |= 0x2000;
-+		else
-+			val |= 0x1000;
-+		cdns_phy_reg_write(mhdp, (XCVR_DIAG_PLLDRC_CTRL | (k << 9)), val);
-+	}
-+
-+	for (k = 0; k < num_lanes; k = k + 1) {
-+		/* Power state machine registers */
-+		cdns_phy_reg_write(mhdp, (XCVR_PSM_RCTRL | (k << 9)),  0xBEFC);
-+		cdns_phy_reg_write(mhdp, (TX_PSC_A0 | (k << 9)), 0x6799);
-+		cdns_phy_reg_write(mhdp, (TX_PSC_A1 | (k << 9)), 0x6798);
-+		cdns_phy_reg_write(mhdp, (TX_PSC_A2 | (k << 9)), 0x0098);
-+		cdns_phy_reg_write(mhdp, (TX_PSC_A3 | (k << 9)), 0x0098);
-+		/* Receiver calibration power state definition register */
-+		val = cdns_phy_reg_read(mhdp, RX_PSC_CAL | (k << 9));
-+		val &= 0xFFBB;
-+		cdns_phy_reg_write(mhdp, (RX_PSC_CAL | (k << 9)), val);
-+		val = cdns_phy_reg_read(mhdp, RX_PSC_A0  | (k << 9));
-+		val &= 0xFFBB;
-+		cdns_phy_reg_write(mhdp, (RX_PSC_A0  | (k << 9)), val);
-+	}
-+}
-+
-+static void dp_phy_power_down(struct cdns_mhdp_device *mhdp)
-+{
-+	u16 val;
-+	int i;
-+
-+	if (!mhdp->power_up)
-+		return;
-+
-+	/* Place the PHY lanes in the A3 power state. */
-+	cdns_phy_reg_write(mhdp, PHY_HDP_MODE_CTRL, 0x8);
-+	/* Wait for Power State A3 Ack */
-+	for (i = 0; i < 10; i++) {
-+		val = cdns_phy_reg_read(mhdp, PHY_HDP_MODE_CTRL);
-+		if (val & (1 << 7))
-+			break;
-+		msleep(20);
-+	}
-+	if (i == 10) {
-+		dev_err(mhdp->dev, "Wait A3 Ack failed\n");
-+		return;
-+	}
-+
-+	/* Disable HDP PLL’s data rate and full rate clocks out of PMA. */
-+	val = cdns_phy_reg_read(mhdp, PHY_HDP_CLK_CTL);
-+	val &= ~(1 << 2);
-+	cdns_phy_reg_write(mhdp, PHY_HDP_CLK_CTL, val);
-+	/* Wait for PLL clock gate ACK */
-+	for (i = 0; i < 10; i++) {
-+		val = cdns_phy_reg_read(mhdp, PHY_HDP_CLK_CTL);
-+		if (!(val & (1 << 3)))
-+			break;
-+		msleep(20);
-+	}
-+	if (i == 10) {
-+		dev_err(mhdp->dev, "Wait PLL clock gate Ack failed\n");
-+		return;
-+	}
-+
-+	/* Disable HDP PLL’s for high speed clocks */
-+	val = cdns_phy_reg_read(mhdp, PHY_HDP_CLK_CTL);
-+	val &= ~(1 << 0);
-+	cdns_phy_reg_write(mhdp, PHY_HDP_CLK_CTL, val);
-+	/* Wait for PLL disable ACK */
-+	for (i = 0; i < 10; i++) {
-+		val = cdns_phy_reg_read(mhdp, PHY_HDP_CLK_CTL);
-+		if (!(val & (1 << 1)))
-+			break;
-+		msleep(20);
-+	}
-+	if (i == 10) {
-+		dev_err(mhdp->dev, "Wait PLL disable Ack failed\n");
-+		return;
-+	}
-+}
-+
-+static int dp_phy_power_up(struct cdns_mhdp_device *mhdp)
-+{
-+	u32 val, i;
-+
-+	/* Enable HDP PLL’s for high speed clocks */
-+	val = cdns_phy_reg_read(mhdp, PHY_HDP_CLK_CTL);
-+	val |= (1 << 0);
-+	cdns_phy_reg_write(mhdp, PHY_HDP_CLK_CTL, val);
-+	/* Wait for PLL ready ACK */
-+	for (i = 0; i < 10; i++) {
-+		val = cdns_phy_reg_read(mhdp, PHY_HDP_CLK_CTL);
-+		if (val & (1 << 1))
-+			break;
-+		msleep(20);
-+	}
-+	if (i == 10) {
-+		dev_err(mhdp->dev, "Wait PLL Ack failed\n");
-+		return -1;
-+	}
-+
-+	/* Enable HDP PLL’s data rate and full rate clocks out of PMA. */
-+	val = cdns_phy_reg_read(mhdp, PHY_HDP_CLK_CTL);
-+	val |= (1 << 2);
-+	cdns_phy_reg_write(mhdp, PHY_HDP_CLK_CTL, val);
-+	/* Wait for PLL clock enable ACK */
-+	for (i = 0; i < 10; i++) {
-+		val = cdns_phy_reg_read(mhdp, PHY_HDP_CLK_CTL);
-+		if (val & (1 << 3))
-+			break;
-+		msleep(20);
-+	}
-+	if (i == 10) {
-+		dev_err(mhdp->dev, "Wait PLL clock enable ACk failed\n");
-+		return -1;
-+	}
-+
-+	/* Configure PHY in A2 Mode */
-+	cdns_phy_reg_write(mhdp, PHY_HDP_MODE_CTRL, 0x0004);
-+	/* Wait for Power State A2 Ack */
-+	for (i = 0; i < 10; i++) {
-+		val = cdns_phy_reg_read(mhdp, PHY_HDP_MODE_CTRL);
-+		if (val & (1 << 6))
-+			break;
-+		msleep(20);
-+	}
-+	if (i == 10) {
-+		dev_err(mhdp->dev, "Wait A2 Ack failed\n");
-+		return -1;
-+	}
-+
-+	/* Configure PHY in A0 mode (PHY must be in the A0 power
-+	 * state in order to transmit data)
-+	 */
-+	cdns_phy_reg_write(mhdp, PHY_HDP_MODE_CTRL, 0x0101);
-+
-+	/* Wait for Power State A0 Ack */
-+	for (i = 0; i < 10; i++) {
-+		val = cdns_phy_reg_read(mhdp, PHY_HDP_MODE_CTRL);
-+		if (val & (1 << 4))
-+			break;
-+		msleep(20);
-+	}
-+	if (i == 10) {
-+		dev_err(mhdp->dev, "Wait A0 Ack failed\n");
-+		return -1;
-+	}
-+
-+	mhdp->power_up = true;
-+
-+	return 0;
-+}
-+
-+int cdns_dp_phy_init_imx8mq(struct imx_mhdp_device *hdp)
-+{
-+	struct cdns_mhdp_device *mhdp = &hdp->mhdp;
-+	int ret;
-+
-+	/* Disable phy clock if PHY in power up state */
-+	dp_phy_power_down(mhdp);
-+
-+	dp_phy_pma_cmn_cfg_27mhz(mhdp);
-+
-+	dp_phy_pma_cmn_pll0_27mhz(mhdp);
-+
-+	cdns_phy_reg_write(mhdp, TX_DIAG_ACYA_0, 1);
-+	cdns_phy_reg_write(mhdp, TX_DIAG_ACYA_1, 1);
-+	cdns_phy_reg_write(mhdp, TX_DIAG_ACYA_2, 1);
-+	cdns_phy_reg_write(mhdp, TX_DIAG_ACYA_3, 1);
-+
-+	/* PHY power up */
-+	ret = dp_phy_power_up(mhdp);
-+	if (ret < 0)
-+		return ret;
-+
-+	dp_aux_cfg(mhdp);
-+
-+	return ret;
-+}
-+
-+
-+int cdns_dp_phy_init_imx8qm(struct imx_mhdp_device *hdp)
-+{
-+	struct cdns_mhdp_device *mhdp = &hdp->mhdp;
-+	int ret;
-+
-+	/* Disable phy clock if PHY in power up state */
-+	dp_phy_power_down(mhdp);
-+
-+	dp_phy_pma_cmn_cfg_24mhz(mhdp);
-+
-+	dp_phy_pma_cmn_pll0_24mhz(mhdp);
-+
-+	cdns_phy_reg_write(mhdp, TX_DIAG_ACYA_0, 1);
-+	cdns_phy_reg_write(mhdp, TX_DIAG_ACYA_1, 1);
-+	cdns_phy_reg_write(mhdp, TX_DIAG_ACYA_2, 1);
-+	cdns_phy_reg_write(mhdp, TX_DIAG_ACYA_3, 1);
-+
-+	/* PHY power up */
-+	ret = dp_phy_power_up(mhdp);
-+	if (ret < 0)
-+		return ret;
-+
-+	dp_aux_cfg(mhdp);
-+
-+	return true;
-+}
---- /dev/null
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-hdmi-phy.c
-@@ -0,0 +1,684 @@
-+/*
-+ * Cadence High-Definition Multimedia Interface (HDMI) driver
-+ *
-+ * Copyright (C) 2019 NXP Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+#include <drm/drm_of.h>
-+#include <drm/drmP.h>
-+#include <drm/drm_crtc_helper.h>
-+#include <linux/io.h>
-+#include <drm/drm_edid.h>
-+#include <drm/drm_encoder_slave.h>
-+#include <drm/drm_atomic.h>
-+#include <linux/io.h>
-+
-+#include <drm/bridge/cdns-mhdp-common.h>
-+#include "cdn-mhdp-phy.h"
-+
-+/* HDMI TX clock control settings */
-+struct hdmi_ctrl {
-+	u32 pixel_clk_freq_min;
-+	u32 pixel_clk_freq_max;
-+	u32 feedback_factor;
-+	u32 data_range_kbps_min;
-+	u32 data_range_kbps_max;
-+	u32 cmnda_pll0_ip_div;
-+	u32 cmn_ref_clk_dig_div;
-+	u32 ref_clk_divider_scaler;
-+	u32 pll_fb_div_total;
-+	u32 cmnda_pll0_fb_div_low;
-+	u32 cmnda_pll0_fb_div_high;
-+	u32 pixel_div_total;
-+	u32 cmnda_pll0_pxdiv_low;
-+	u32 cmnda_pll0_pxdiv_high;
-+	u32 vco_freq_min;
-+	u32 vco_freq_max;
-+	u32 vco_ring_select;
-+	u32 cmnda_hs_clk_0_sel;
-+	u32 cmnda_hs_clk_1_sel;
-+	u32 hsclk_div_at_xcvr;
-+	u32 hsclk_div_tx_sub_rate;
-+	u32 cmnda_pll0_hs_sym_div_sel;
-+	u32 cmnda_pll0_clk_freq_min;
-+	u32 cmnda_pll0_clk_freq_max;
-+};
-+
-+/* HDMI TX clock control settings, pixel clock is output */
-+static const struct hdmi_ctrl imx8mq_ctrl_table[] = {
-+/*Minclk  Maxclk Fdbak  DR_min   DR_max  ip_d  dig  DS    Totl */
-+{ 27000,  27000, 1000,  270000,  270000, 0x03, 0x1, 0x1,  240, 0x0BC, 0x030,  80, 0x026, 0x026, 2160000, 2160000, 0, 2, 2, 2, 4, 0x3,  27000,  27000},
-+{ 27000,  27000, 1250,  337500,  337500, 0x03, 0x1, 0x1,  300, 0x0EC, 0x03C, 100, 0x030, 0x030, 2700000, 2700000, 0, 2, 2, 2, 4, 0x3,  33750,  33750},
-+{ 27000,  27000, 1500,  405000,  405000, 0x03, 0x1, 0x1,  360, 0x11C, 0x048, 120, 0x03A, 0x03A, 3240000, 3240000, 0, 2, 2, 2, 4, 0x3,  40500,  40500},
-+{ 27000,  27000, 2000,  540000,  540000, 0x03, 0x1, 0x1,  240, 0x0BC, 0x030,  80, 0x026, 0x026, 2160000, 2160000, 0, 2, 2, 2, 4, 0x2,  54000,  54000},
-+{ 54000,  54000, 1000,  540000,  540000, 0x03, 0x1, 0x1,  480, 0x17C, 0x060,  80, 0x026, 0x026, 4320000, 4320000, 1, 2, 2, 2, 4, 0x3,  54000,  54000},
-+{ 54000,  54000, 1250,  675000,  675000, 0x04, 0x1, 0x1,  400, 0x13C, 0x050,  50, 0x017, 0x017, 2700000, 2700000, 0, 1, 1, 2, 4, 0x2,  67500,  67500},
-+{ 54000,  54000, 1500,  810000,  810000, 0x04, 0x1, 0x1,  480, 0x17C, 0x060,  60, 0x01C, 0x01C, 3240000, 3240000, 0, 2, 2, 2, 2, 0x2,  81000,  81000},
-+{ 54000,  54000, 2000, 1080000, 1080000, 0x03, 0x1, 0x1,  240, 0x0BC, 0x030,  40, 0x012, 0x012, 2160000, 2160000, 0, 2, 2, 2, 1, 0x1, 108000, 108000},
-+{ 74250,  74250, 1000,  742500,  742500, 0x03, 0x1, 0x1,  660, 0x20C, 0x084,  80, 0x026, 0x026, 5940000, 5940000, 1, 2, 2, 2, 4, 0x3,  74250,  74250},
-+{ 74250,  74250, 1250,  928125,  928125, 0x04, 0x1, 0x1,  550, 0x1B4, 0x06E,  50, 0x017, 0x017, 3712500, 3712500, 1, 1, 1, 2, 4, 0x2,  92812,  92812},
-+{ 74250,  74250, 1500, 1113750, 1113750, 0x04, 0x1, 0x1,  660, 0x20C, 0x084,  60, 0x01C, 0x01C, 4455000, 4455000, 1, 2, 2, 2, 2, 0x2, 111375, 111375},
-+{ 74250,  74250, 2000, 1485000, 1485000, 0x03, 0x1, 0x1,  330, 0x104, 0x042,  40, 0x012, 0x012, 2970000, 2970000, 0, 2, 2, 2, 1, 0x1, 148500, 148500},
-+{ 99000,  99000, 1000,  990000,  990000, 0x03, 0x1, 0x1,  440, 0x15C, 0x058,  40, 0x012, 0x012, 3960000, 3960000, 1, 2, 2, 2, 2, 0x2,  99000,  99000},
-+{ 99000,  99000, 1250, 1237500, 1237500, 0x03, 0x1, 0x1,  275, 0x0D8, 0x037,  25, 0x00B, 0x00A, 2475000, 2475000, 0, 1, 1, 2, 2, 0x1, 123750, 123750},
-+{ 99000,  99000, 1500, 1485000, 1485000, 0x03, 0x1, 0x1,  330, 0x104, 0x042,  30, 0x00D, 0x00D, 2970000, 2970000, 0, 2, 2, 2, 1, 0x1, 148500, 148500},
-+{ 99000,  99000, 2000, 1980000, 1980000, 0x03, 0x1, 0x1,  440, 0x15C, 0x058,  40, 0x012, 0x012, 3960000, 3960000, 1, 2, 2, 2, 1, 0x1, 198000, 198000},
-+{148500, 148500, 1000, 1485000, 1485000, 0x03, 0x1, 0x1,  660, 0x20C, 0x084,  40, 0x012, 0x012, 5940000, 5940000, 1, 2, 2, 2, 2, 0x2, 148500, 148500},
-+{148500, 148500, 1250, 1856250, 1856250, 0x04, 0x1, 0x1,  550, 0x1B4, 0x06E,  25, 0x00B, 0x00A, 3712500, 3712500, 1, 1, 1, 2, 2, 0x1, 185625, 185625},
-+{148500, 148500, 1500, 2227500, 2227500, 0x03, 0x1, 0x1,  495, 0x188, 0x063,  30, 0x00D, 0x00D, 4455000, 4455000, 1, 1, 1, 2, 2, 0x1, 222750, 222750},
-+{148500, 148500, 2000, 2970000, 2970000, 0x03, 0x1, 0x1,  660, 0x20C, 0x084,  40, 0x012, 0x012, 5940000, 5940000, 1, 2, 2, 2, 1, 0x1, 297000, 297000},
-+{198000, 198000, 1000, 1980000, 1980000, 0x03, 0x1, 0x1,  220, 0x0AC, 0x02C,  10, 0x003, 0x003, 1980000, 1980000, 0, 1, 1, 2, 1, 0x0, 198000, 198000},
-+{198000, 198000, 1250, 2475000, 2475000, 0x03, 0x1, 0x1,  550, 0x1B4, 0x06E,  25, 0x00B, 0x00A, 4950000, 4950000, 1, 1, 1, 2, 2, 0x1, 247500, 247500},
-+{198000, 198000, 1500, 2970000, 2970000, 0x03, 0x1, 0x1,  330, 0x104, 0x042,  15, 0x006, 0x005, 2970000, 2970000, 0, 1, 1, 2, 1, 0x0, 297000, 297000},
-+{198000, 198000, 2000, 3960000, 3960000, 0x03, 0x1, 0x1,  440, 0x15C, 0x058,  20, 0x008, 0x008, 3960000, 3960000, 1, 1, 1, 2, 1, 0x0, 396000, 396000},
-+{297000, 297000, 1000, 2970000, 2970000, 0x03, 0x1, 0x1,  330, 0x104, 0x042,  10, 0x003, 0x003, 2970000, 2970000, 0, 1, 1, 2, 1, 0x0, 297000, 297000},
-+{297000, 297000, 1500, 4455000, 4455000, 0x03, 0x1, 0x1,  495, 0x188, 0x063,  15, 0x006, 0x005, 4455000, 4455000, 1, 1, 1, 2, 1, 0x0, 445500, 445500},
-+{297000, 297000, 2000, 5940000, 5940000, 0x03, 0x1, 0x1,  660, 0x20C, 0x084,  20, 0x008, 0x008, 5940000, 5940000, 1, 1, 1, 2, 1, 0x0, 594000, 594000},
-+{594000, 594000, 1000, 5940000, 5940000, 0x03, 0x1, 0x1,  660, 0x20C, 0x084,  10, 0x003, 0x003, 5940000, 5940000, 1, 1, 1, 2, 1, 0x0, 594000, 594000},
-+{594000, 594000,  750, 4455000, 4455000, 0x03, 0x1, 0x1,  495, 0x188, 0x063,  10, 0x003, 0x003, 4455000, 4455000, 1, 1, 1, 2, 1, 0x0, 445500, 445500},
-+{594000, 594000,  625, 3712500, 3712500, 0x04, 0x1, 0x1,  550, 0x1B4, 0x06E,  10, 0x003, 0x003, 3712500, 3712500, 1, 1, 1, 2, 1, 0x0, 371250, 371250},
-+{594000, 594000,  500, 2970000, 2970000, 0x03, 0x1, 0x1,  660, 0x20C, 0x084,  10, 0x003, 0x003, 5940000, 5940000, 1, 1, 1, 2, 2, 0x1, 297000, 297000},
-+};
-+
-+/* HDMI TX clock control settings, pixel clock is input */
-+static const struct hdmi_ctrl imx8qm_ctrl_table[] = {
-+/*pclk_l  pclk_h  fd    DRR_L    DRR_H   PLLD */
-+{ 25000,  42500, 1000,  250000,  425000, 0x05, 0x01, 0x01, 400, 0x182, 0x00A, 0, 0, 0, 2000000, 3400000, 0, 2, 2, 2, 4, 0x03,  25000,  42500},
-+{ 42500,  85000, 1000,  425000,  850000, 0x08, 0x03, 0x01, 320, 0x132, 0x00A, 0, 0, 0, 1700000, 3400000, 0, 1, 1, 2, 4, 0x02,  42500,  85000},
-+{ 85000, 170000, 1000,  850000, 1700000, 0x11, 0x00, 0x07, 340, 0x146, 0x00A, 0, 0, 0, 1700000, 3400000, 0, 1, 1, 2, 2, 0x01,  85000, 170000},
-+{170000, 340000, 1000, 1700000, 3400000, 0x22, 0x01, 0x07, 340, 0x146, 0x00A, 0, 0, 0, 1700000, 3400000, 0, 1, 1, 2, 1, 0x00, 170000, 340000},
-+{340000, 600000, 1000, 3400000, 6000000, 0x3C, 0x03, 0x06, 600, 0x24A, 0x00A, 0, 0, 0, 3400000, 6000000, 1, 1, 1, 2, 1, 0x00, 340000, 600000},
-+{ 25000,  34000, 1205,  312500,  425000, 0x04, 0x01, 0x01, 400, 0x182, 0x00A, 0, 0, 0, 2500000, 3400000, 0, 2, 2, 2, 4, 0x03,  31250,  42500},
-+{ 34000,  68000, 1205,  425000,  850000, 0x06, 0x02, 0x01, 300, 0x11E, 0x00A, 0, 0, 0, 1700000, 3400000, 0, 1, 1, 2, 4, 0x02,  42500,  85000},
-+{ 68000, 136000, 1205,  850000, 1700000, 0x0D, 0x02, 0x02, 325, 0x137, 0x00A, 0, 0, 0, 1700000, 3400000, 0, 1, 1, 2, 2, 0x01,  85000, 170000},
-+{136000, 272000, 1205, 1700000, 3400000, 0x1A, 0x02, 0x04, 325, 0x137, 0x00A, 0, 0, 0, 1700000, 3400000, 0, 1, 1, 2, 1, 0x00, 170000, 340000},
-+{272000, 480000, 1205, 3400000, 6000000, 0x30, 0x03, 0x05, 600, 0x24A, 0x00A, 0, 0, 0, 3400000, 6000000, 1, 1, 1, 2, 1, 0x00, 340000, 600000},
-+{ 25000,  28000, 1500,  375000,  420000, 0x03, 0x01, 0x01, 360, 0x15A, 0x00A, 0, 0, 0, 3000000, 3360000, 0, 2, 2, 2, 4, 0x03,  37500,  42000},
-+{ 28000,  56000, 1500,  420000,  840000, 0x06, 0x02, 0x01, 360, 0x15A, 0x00A, 0, 0, 0, 1680000, 3360000, 0, 1, 1, 2, 4, 0x02,  42000,  84000},
-+{ 56000, 113000, 1500,  840000, 1695000, 0x0B, 0x00, 0x05, 330, 0x13C, 0x00A, 0, 0, 0, 1680000, 3390000, 0, 1, 1, 2, 2, 0x01,  84000, 169500},
-+{113000, 226000, 1500, 1695000, 3390000, 0x16, 0x01, 0x05, 330, 0x13C, 0x00A, 0, 0, 0, 1695000, 3390000, 0, 1, 1, 2, 1, 0x00, 169500, 339000},
-+{226000, 400000, 1500, 3390000, 6000000, 0x28, 0x03, 0x04, 600, 0x24A, 0x00A, 0, 0, 0, 3390000, 6000000, 1, 1, 1, 2, 1, 0x00, 339000, 600000},
-+{ 25000,  42500, 2000,  500000,  850000, 0x05, 0x01, 0x01, 400, 0x182, 0x00A, 0, 0, 0, 2000000, 3400000, 0, 1, 1, 2, 4, 0x02,  50000,  85000},
-+{ 42500,  85000, 2000,  850000, 1700000, 0x08, 0x03, 0x01, 320, 0x132, 0x00A, 0, 0, 0, 1700000, 3400000, 0, 1, 1, 2, 2, 0x01,  85000, 170000},
-+{ 85000, 170000, 2000, 1700000, 3400000, 0x11, 0x00, 0x07, 340, 0x146, 0x00A, 0, 0, 0, 1700000, 3400000, 0, 1, 1, 2, 1, 0x00, 170000, 340000},
-+{170000, 300000, 2000, 3400000, 6000000, 0x22, 0x01, 0x06, 680, 0x29A, 0x00A, 0, 0, 0, 3400000, 6000000, 1, 1, 1, 2, 1, 0x00, 340000, 600000},
-+{594000, 594000, 5000, 2970000, 2970000, 0x3C, 0x03, 0x06, 600, 0x24A, 0x00A, 0, 0, 0, 5940000, 5940000, 1, 1, 1, 2, 2, 0x01, 297000, 297000},
-+{594000, 594000, 6250, 3712500, 3712500, 0x3C, 0x03, 0x06, 375, 0x169, 0x00A, 0, 0, 0, 3712500, 3712500, 1, 1, 1, 2, 1, 0x00, 371250, 371250},
-+{594000, 594000, 7500, 4455000, 4455000, 0x3C, 0x03, 0x06, 450, 0x1B4, 0x00A, 0, 0, 0, 4455000, 4455000, 1, 1, 1, 2, 1, 0x00, 445500, 445500},
-+};
-+
-+/* HDMI TX PLL tuning settings */
-+struct hdmi_pll_tuning {
-+	u32 vco_freq_bin;
-+	u32 vco_freq_min;
-+	u32 vco_freq_max;
-+	u32 volt_to_current_coarse;
-+	u32 volt_to_current;
-+	u32 ndac_ctrl;
-+	u32 pmos_ctrl;
-+	u32 ptat_ndac_ctrl;
-+	u32 feedback_div_total;
-+	u32 charge_pump_gain;
-+	u32 coarse_code;
-+	u32 v2i_code;
-+	u32 vco_cal_code;
-+};
-+
-+/* HDMI TX PLL tuning settings, pixel clock is output */
-+static const struct hdmi_pll_tuning imx8mq_pll_table[] = {
-+/*    bin VCO_freq min/max  coar  cod NDAC  PMOS PTAT div-T P-Gain Coa V2I CAL */
-+    {  1, 1980000, 1980000, 0x4, 0x3, 0x0, 0x09, 0x09, 220, 0x42, 160, 5, 183 },
-+    {  2, 2160000, 2160000, 0x4, 0x3, 0x0, 0x09, 0x09, 240, 0x42, 166, 6, 208 },
-+    {  3, 2475000, 2475000, 0x5, 0x3, 0x1, 0x00, 0x07, 275, 0x42, 167, 6, 209 },
-+    {  4, 2700000, 2700000, 0x5, 0x3, 0x1, 0x00, 0x07, 300, 0x42, 188, 6, 230 },
-+    {  4, 2700000, 2700000, 0x5, 0x3, 0x1, 0x00, 0x07, 400, 0x4C, 188, 6, 230 },
-+    {  5, 2970000, 2970000, 0x6, 0x3, 0x1, 0x00, 0x07, 330, 0x42, 183, 6, 225 },
-+    {  6, 3240000, 3240000, 0x6, 0x3, 0x1, 0x00, 0x07, 360, 0x42, 203, 7, 256 },
-+    {  6, 3240000, 3240000, 0x6, 0x3, 0x1, 0x00, 0x07, 480, 0x4C, 203, 7, 256 },
-+    {  7, 3712500, 3712500, 0x4, 0x3, 0x0, 0x07, 0x0F, 550, 0x4C, 212, 7, 257 },
-+    {  8, 3960000, 3960000, 0x5, 0x3, 0x0, 0x07, 0x0F, 440, 0x42, 184, 6, 226 },
-+    {  9, 4320000, 4320000, 0x5, 0x3, 0x1, 0x07, 0x0F, 480, 0x42, 205, 7, 258 },
-+    { 10, 4455000, 4455000, 0x5, 0x3, 0x0, 0x07, 0x0F, 495, 0x42, 219, 7, 272 },
-+    { 10, 4455000, 4455000, 0x5, 0x3, 0x0, 0x07, 0x0F, 660, 0x4C, 219, 7, 272 },
-+    { 11, 4950000, 4950000, 0x6, 0x3, 0x1, 0x00, 0x07, 550, 0x42, 213, 7, 258 },
-+    { 12, 5940000, 5940000, 0x7, 0x3, 0x1, 0x00, 0x07, 660, 0x42, 244, 8, 292 },
-+};
-+
-+/* HDMI TX PLL tuning settings, pixel clock is input */
-+static const struct hdmi_pll_tuning imx8qm_pll_table[] = {
-+/*  bin VCO_freq min/max  coar  cod NDAC  PMOS PTAT div-T P-Gain  pad only */
-+	{ 0, 1700000, 2000000, 0x3, 0x1, 0x0, 0x8C, 0x2E, 300, 0x08D, 0, 0, 0 },
-+	{ 0, 1700000, 2000000, 0x3, 0x1, 0x0, 0x8C, 0x2E, 320, 0x08E, 0, 0, 0 },
-+	{ 0, 1700000, 2000000, 0x3, 0x1, 0x0, 0x8C, 0x2E, 325, 0x08E, 0, 0, 0 },
-+	{ 0, 1700000, 2000000, 0x3, 0x1, 0x0, 0x8C, 0x2E, 330, 0x08E, 0, 0, 0 },
-+	{ 0, 1700000, 2000000, 0x3, 0x1, 0x0, 0x8C, 0x2E, 340, 0x08F, 0, 0, 0 },
-+	{ 0, 1700000, 2000000, 0x3, 0x1, 0x0, 0x8C, 0x2E, 360, 0x0A7, 0, 0, 0 },
-+	{ 0, 1700000, 2000000, 0x3, 0x1, 0x0, 0x8C, 0x2E, 400, 0x0C5, 0, 0, 0 },
-+	{ 1, 2000000, 2400000, 0x3, 0x1, 0x0, 0x8C, 0x2E, 300, 0x086, 0, 0, 0 },
-+	{ 1, 2000000, 2400000, 0x3, 0x1, 0x0, 0x8C, 0x2E, 320, 0x087, 0, 0, 0 },
-+	{ 1, 2000000, 2400000, 0x3, 0x1, 0x0, 0x8C, 0x2E, 325, 0x087, 0, 0, 0 },
-+	{ 1, 2000000, 2400000, 0x3, 0x1, 0x0, 0x8C, 0x2E, 330, 0x104, 0, 0, 0 },
-+	{ 1, 2000000, 2400000, 0x3, 0x1, 0x0, 0x8C, 0x2E, 340, 0x08B, 0, 0, 0 },
-+	{ 1, 2000000, 2400000, 0x3, 0x1, 0x0, 0x8C, 0x2E, 360, 0x08D, 0, 0, 0 },
-+	{ 1, 2000000, 2400000, 0x3, 0x1, 0x0, 0x8C, 0x2E, 400, 0x0A6, 0, 0, 0 },
-+	{ 2, 2400000, 2800000, 0x3, 0x1, 0x0, 0x04, 0x0D, 300, 0x04E, 0, 0, 0 },
-+	{ 2, 2400000, 2800000, 0x3, 0x1, 0x0, 0x04, 0x0D, 320, 0x04F, 0, 0, 0 },
-+	{ 2, 2400000, 2800000, 0x3, 0x1, 0x0, 0x04, 0x0D, 325, 0x04F, 0, 0, 0 },
-+	{ 2, 2400000, 2800000, 0x3, 0x1, 0x0, 0x04, 0x0D, 330, 0x085, 0, 0, 0 },
-+	{ 2, 2400000, 2800000, 0x3, 0x1, 0x0, 0x04, 0x0D, 340, 0x085, 0, 0, 0 },
-+	{ 2, 2400000, 2800000, 0x3, 0x1, 0x0, 0x04, 0x0D, 360, 0x086, 0, 0, 0 },
-+	{ 2, 2400000, 2800000, 0x3, 0x1, 0x0, 0x04, 0x0D, 400, 0x08B, 0, 0, 0 },
-+	{ 3, 2800000, 3400000, 0x3, 0x1, 0x0, 0x04, 0x0D, 300, 0x047, 0, 0, 0 },
-+	{ 3, 2800000, 3400000, 0x3, 0x1, 0x0, 0x04, 0x0D, 320, 0x04B, 0, 0, 0 },
-+	{ 3, 2800000, 3400000, 0x3, 0x1, 0x0, 0x04, 0x0D, 325, 0x04B, 0, 0, 0 },
-+	{ 3, 2800000, 3400000, 0x3, 0x1, 0x0, 0x04, 0x0D, 330, 0x04B, 0, 0, 0 },
-+	{ 3, 2800000, 3400000, 0x3, 0x1, 0x0, 0x04, 0x0D, 340, 0x04D, 0, 0, 0 },
-+	{ 3, 2800000, 3400000, 0x3, 0x1, 0x0, 0x04, 0x0D, 360, 0x04E, 0, 0, 0 },
-+	{ 3, 2800000, 3400000, 0x3, 0x1, 0x0, 0x04, 0x0D, 400, 0x085, 0, 0, 0 },
-+	{ 4, 3400000, 3900000, 0x7, 0x1, 0x0, 0x8E, 0x2F, 375, 0x041, 0, 0, 0 },
-+	{ 4, 3400000, 3900000, 0x7, 0x1, 0x0, 0x8E, 0x2F, 600, 0x08D, 0, 0, 0 },
-+	{ 4, 3400000, 3900000, 0x7, 0x1, 0x0, 0x8E, 0x2F, 680, 0x0A6, 0, 0, 0 },
-+	{ 5, 3900000, 4500000, 0x7, 0x1, 0x0, 0x8E, 0x2F, 450, 0x041, 0, 0, 0 },
-+	{ 5, 3900000, 4500000, 0x7, 0x1, 0x0, 0x8E, 0x2F, 600, 0x087, 0, 0, 0 },
-+	{ 5, 3900000, 4500000, 0x7, 0x1, 0x0, 0x8E, 0x2F, 680, 0x0A4, 0, 0, 0 },
-+	{ 6, 4500000, 5200000, 0x7, 0x1, 0x0, 0x04, 0x0D, 600, 0x04F, 0, 0, 0 },
-+	{ 6, 4500000, 5200000, 0x7, 0x1, 0x0, 0x04, 0x0D, 680, 0x086, 0, 0, 0 },
-+	{ 7, 5200000, 6000000, 0x7, 0x1, 0x0, 0x04, 0x0D, 600, 0x04D, 0, 0, 0 },
-+	{ 7, 5200000, 6000000, 0x7, 0x1, 0x0, 0x04, 0x0D, 680, 0x04F, 0, 0, 0 }
-+};
-+
-+static void hdmi_phy_set_vswing(struct cdns_mhdp_device *mhdp)
-+{
-+	const u32 num_lanes = 4;
-+	u32 k;
-+
-+	for (k = 0; k < num_lanes; k++) {
-+		cdns_phy_reg_write(mhdp, (TX_DIAG_TX_DRV | (k << 9)), 0x7c0);
-+		cdns_phy_reg_write(mhdp, (TX_TXCC_CPOST_MULT_00_0 | (k << 9)), 0x0);
-+		cdns_phy_reg_write(mhdp, (TX_TXCC_CAL_SCLR_MULT_0 | (k << 9)), 0x120);
-+	}
-+}
-+
-+static int hdmi_feedback_factor(struct cdns_mhdp_device *mhdp)
-+{
-+	u32 feedback_factor;
-+
-+	switch (mhdp->video_info.color_fmt) {
-+	case YCBCR_4_2_2:
-+		feedback_factor = 1000;
-+		break;
-+	case YCBCR_4_2_0:
-+		switch (mhdp->video_info.color_depth) {
-+		case 8:
-+			feedback_factor = 500;
-+			break;
-+		case 10:
-+			feedback_factor = 625;
-+			break;
-+		case 12:
-+			feedback_factor = 750;
-+			break;
-+		case 16:
-+			feedback_factor = 1000;
-+			break;
-+		default:
-+			DRM_ERROR("Invalid ColorDepth\n");
-+			return 0;
-+		}
-+		break;
-+	default:
-+		/* Assume RGB/YUV444 */
-+		switch (mhdp->video_info.color_depth) {
-+		case 10:
-+			feedback_factor = 1250;
-+			break;
-+		case 12:
-+			feedback_factor = 1500;
-+			break;
-+		case 16:
-+			feedback_factor = 2000;
-+			break;
-+		default:
-+			feedback_factor = 1000;
-+		}
-+	}
-+	return feedback_factor;
-+}
-+
-+static int hdmi_phy_config(struct cdns_mhdp_device *mhdp,
-+					const struct hdmi_ctrl *p_ctrl_table,
-+					const struct hdmi_pll_tuning *p_pll_table,
-+					char pclk_in)
-+{
-+	const u32 num_lanes = 4;
-+	u32 val, i, k;
-+
-+	/* enable PHY isolation mode only for CMN */
-+	cdns_phy_reg_write(mhdp, PHY_PMA_ISOLATION_CTRL, 0xD000);
-+
-+	/* set cmn_pll0_clk_datart1_div/cmn_pll0_clk_datart0_div dividers */
-+	val = cdns_phy_reg_read(mhdp, PHY_PMA_ISO_PLL_CTRL1);
-+	val &= 0xFF00;
-+	val |= 0x0012;
-+	cdns_phy_reg_write(mhdp, PHY_PMA_ISO_PLL_CTRL1, val);
-+
-+	/* assert PHY reset from isolation register */
-+	cdns_phy_reg_write(mhdp, PHY_ISO_CMN_CTRL, 0x0000);
-+	/* assert PMA CMN reset */
-+	cdns_phy_reg_write(mhdp, PHY_PMA_ISO_CMN_CTRL, 0x0000);
-+
-+	/* register XCVR_DIAG_BIDI_CTRL */
-+	for (k = 0; k < num_lanes; k++)
-+		cdns_phy_reg_write(mhdp, XCVR_DIAG_BIDI_CTRL | (k << 9), 0x00FF);
-+
-+	/* Describing Task phy_cfg_hdp */
-+
-+	val = cdns_phy_reg_read(mhdp, PHY_PMA_CMN_CTRL1);
-+	val &= 0xFFF7;
-+	val |= 0x0008;
-+	cdns_phy_reg_write(mhdp, PHY_PMA_CMN_CTRL1, val);
-+
-+	/* PHY Registers */
-+	val = cdns_phy_reg_read(mhdp, PHY_PMA_CMN_CTRL1);
-+	val &= 0xCFFF;
-+	val |= p_ctrl_table->cmn_ref_clk_dig_div << 12;
-+	cdns_phy_reg_write(mhdp, PHY_PMA_CMN_CTRL1, val);
-+
-+	val = cdns_phy_reg_read(mhdp, PHY_HDP_CLK_CTL);
-+	val &= 0x00FF;
-+	val |= 0x1200;
-+	cdns_phy_reg_write(mhdp, PHY_HDP_CLK_CTL, val);
-+
-+	/* Common control module control and diagnostic registers */
-+	val = cdns_phy_reg_read(mhdp, CMN_CDIAG_REFCLK_CTRL);
-+	val &= 0x8FFF;
-+	val |= p_ctrl_table->ref_clk_divider_scaler << 12;
-+	val |= 0x00C0;
-+	cdns_phy_reg_write(mhdp, CMN_CDIAG_REFCLK_CTRL, val);
-+
-+	/* High speed clock used */
-+	val = cdns_phy_reg_read(mhdp, CMN_DIAG_HSCLK_SEL);
-+	val &= 0xFF00;
-+	val |= (p_ctrl_table->cmnda_hs_clk_0_sel >> 1) << 0;
-+	val |= (p_ctrl_table->cmnda_hs_clk_1_sel >> 1) << 4;
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_HSCLK_SEL, val);
-+
-+	for (k = 0; k < num_lanes; k++) {
-+		val = cdns_phy_reg_read(mhdp, (XCVR_DIAG_HSCLK_SEL | (k << 9)));
-+		val &= 0xCFFF;
-+		val |= (p_ctrl_table->cmnda_hs_clk_0_sel >> 1) << 12;
-+		cdns_phy_reg_write(mhdp, (XCVR_DIAG_HSCLK_SEL | (k << 9)), val);
-+	}
-+
-+	/* PLL 0 control state machine registers */
-+	val = p_ctrl_table->vco_ring_select << 12;
-+	cdns_phy_reg_write(mhdp, CMN_PLLSM0_USER_DEF_CTRL, val);
-+
-+	if (pclk_in == true)
-+		val = 0x30A0;
-+	else {
-+		val = cdns_phy_reg_read(mhdp, CMN_PLL0_VCOCAL_START);
-+		val &= 0xFE00;
-+		val |= p_pll_table->vco_cal_code;
-+	}
-+	cdns_phy_reg_write(mhdp, CMN_PLL0_VCOCAL_START, val);
-+
-+	cdns_phy_reg_write(mhdp, CMN_PLL0_VCOCAL_INIT_TMR, 0x0064);
-+	cdns_phy_reg_write(mhdp, CMN_PLL0_VCOCAL_ITER_TMR, 0x000A);
-+
-+	/* Common functions control and diagnostics registers */
-+	val = p_ctrl_table->cmnda_pll0_hs_sym_div_sel << 8;
-+	val |= p_ctrl_table->cmnda_pll0_ip_div;
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_PLL0_INCLK_CTRL, val);
-+
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_PLL0_OVRD, 0x0000);
-+
-+	val = p_ctrl_table->cmnda_pll0_fb_div_high;
-+	val |= (1 << 15);
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_PLL0_FBH_OVRD, val);
-+
-+	val = p_ctrl_table->cmnda_pll0_fb_div_low;
-+	val |= (1 << 15);
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_PLL0_FBL_OVRD, val);
-+
-+	if (pclk_in == false) {
-+		val = p_ctrl_table->cmnda_pll0_pxdiv_low;
-+		cdns_phy_reg_write(mhdp, CMN_DIAG_PLL0_PXL_DIVL, val);
-+
-+		val = p_ctrl_table->cmnda_pll0_pxdiv_high;
-+		val |= (1 << 15);
-+		cdns_phy_reg_write(mhdp, CMN_DIAG_PLL0_PXL_DIVH, val);
-+	}
-+
-+	val = p_pll_table->volt_to_current_coarse;
-+	val |= (p_pll_table->volt_to_current) << 4;
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_PLL0_V2I_TUNE, val);
-+
-+	val = p_pll_table->charge_pump_gain;
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_PLL0_CP_TUNE, val);
-+
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_PLL0_LF_PROG, 0x0008);
-+
-+	val = p_pll_table->pmos_ctrl;
-+	val |= (p_pll_table->ndac_ctrl) << 8;
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_PLL0_PTATIS_TUNE1, val);
-+
-+	val = p_pll_table->ptat_ndac_ctrl;
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_PLL0_PTATIS_TUNE2, val);
-+
-+	if (pclk_in == true)
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_PLL0_TEST_MODE, 0x0022);
-+	else
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_PLL0_TEST_MODE, 0x0020);
-+	cdns_phy_reg_write(mhdp, CMN_PSM_CLK_CTRL, 0x0016);
-+
-+	/* Transceiver control and diagnostic registers */
-+	for (k = 0; k < num_lanes; k++) {
-+		val = cdns_phy_reg_read(mhdp, (XCVR_DIAG_PLLDRC_CTRL | (k << 9)));
-+		val &= 0xBFFF;
-+		cdns_phy_reg_write(mhdp, (XCVR_DIAG_PLLDRC_CTRL | (k << 9)), val);
-+	}
-+
-+	for (k = 0; k < num_lanes; k++) {
-+		val = cdns_phy_reg_read(mhdp, (TX_DIAG_TX_CTRL | (k << 9)));
-+		val &= 0xFF3F;
-+		val |= (p_ctrl_table->hsclk_div_tx_sub_rate >> 1) << 6;
-+		cdns_phy_reg_write(mhdp, (TX_DIAG_TX_CTRL | (k << 9)), val);
-+	}
-+
-+	/*
-+	 * for single ended reference clock val |= 0x0030;
-+	 * for differential clock  val |= 0x0000;
-+	 */
-+	val = cdns_phy_reg_read(mhdp, PHY_PMA_CMN_CTRL1);
-+	val &= 0xFF8F;
-+	if (pclk_in == true)
-+		val |= 0x0030;
-+	cdns_phy_reg_write(mhdp, PHY_PMA_CMN_CTRL1, val);
-+
-+	/* for differential clock on the refclk_p and
-+	 * refclk_m off chip pins: CMN_DIAG_ACYA[8]=1'b1 */
-+	cdns_phy_reg_write(mhdp, CMN_DIAG_ACYA, 0x0100);
-+
-+	/* Deassert PHY reset */
-+	cdns_phy_reg_write(mhdp, PHY_ISO_CMN_CTRL, 0x0001);
-+	cdns_phy_reg_write(mhdp, PHY_PMA_ISO_CMN_CTRL, 0x0003);
-+
-+	/* Power state machine registers */
-+	for (k = 0; k < num_lanes; k++)
-+		cdns_phy_reg_write(mhdp, XCVR_PSM_RCTRL | (k << 9), 0xFEFC);
-+
-+	/* Assert cmn_macro_pwr_en */
-+	cdns_phy_reg_write(mhdp, PHY_PMA_ISO_CMN_CTRL, 0x0013);
-+
-+	/* wait for cmn_macro_pwr_en_ack */
-+	for (i = 0; i < 10; i++) {
-+		val = cdns_phy_reg_read(mhdp, PHY_PMA_ISO_CMN_CTRL);
-+		if (val & (1 << 5))
-+			break;
-+		msleep(20);
-+	}
-+	if (i == 10) {
-+		DRM_ERROR("PMA ouput macro power up failed\n");
-+		return false;
-+	}
-+
-+	/* wait for cmn_ready */
-+	for (i = 0; i < 10; i++) {
-+		val = cdns_phy_reg_read(mhdp, PHY_PMA_CMN_CTRL1);
-+		if (val & (1 << 0))
-+			break;
-+		msleep(20);
-+	}
-+	if (i == 10) {
-+		DRM_ERROR("PMA output ready failed\n");
-+		return false;
-+	}
-+
-+	for (k = 0; k < num_lanes; k++) {
-+		cdns_phy_reg_write(mhdp, TX_PSC_A0 | (k << 9), 0x6791);
-+		cdns_phy_reg_write(mhdp, TX_PSC_A1 | (k << 9), 0x6790);
-+		cdns_phy_reg_write(mhdp, TX_PSC_A2 | (k << 9), 0x0090);
-+		cdns_phy_reg_write(mhdp, TX_PSC_A3 | (k << 9), 0x0090);
-+
-+		val = cdns_phy_reg_read(mhdp, RX_PSC_CAL | (k << 9));
-+		val &= 0xFFBB;
-+		cdns_phy_reg_write(mhdp, RX_PSC_CAL | (k << 9), val);
-+
-+		val = cdns_phy_reg_read(mhdp, RX_PSC_A0 | (k << 9));
-+		val &= 0xFFBB;
-+		cdns_phy_reg_write(mhdp, RX_PSC_A0 | (k << 9), val);
-+	}
-+	return true;
-+}
-+
-+static int hdmi_phy_cfg_t28hpc(struct cdns_mhdp_device *mhdp,
-+				struct drm_display_mode *mode)
-+{
-+	const struct hdmi_ctrl *p_ctrl_table;
-+	const struct hdmi_pll_tuning *p_pll_table;
-+	const u32 refclk_freq_khz = 27000;
-+	const u8 pclk_in = false;
-+	u32 pixel_freq = mode->clock;
-+	u32 vco_freq, char_freq;
-+	u32 div_total, feedback_factor;
-+	u32 i, ret;
-+
-+	feedback_factor = hdmi_feedback_factor(mhdp);
-+
-+	char_freq = pixel_freq * feedback_factor / 1000;
-+
-+	DRM_INFO("Pixel clock: %d KHz, character clock: %d, bpc is %0d-bit.\n",
-+	     pixel_freq, char_freq, mhdp->video_info.color_depth);
-+
-+	/* Get right row from the ctrl_table table.
-+	 * Check if 'pixel_freq_khz' value matches the PIXEL_CLK_FREQ column.
-+	 * Consider only the rows with FEEDBACK_FACTOR column matching feedback_factor. */
-+	for (i = 0; i < ARRAY_SIZE(imx8mq_ctrl_table); i++) {
-+		if (feedback_factor == imx8mq_ctrl_table[i].feedback_factor &&
-+				pixel_freq == imx8mq_ctrl_table[i].pixel_clk_freq_min) {
-+			p_ctrl_table = &imx8mq_ctrl_table[i];
-+			break;
-+		}
-+	}
-+	if (i == ARRAY_SIZE(imx8mq_ctrl_table)) {
-+		DRM_WARN("Pixel clk (%d KHz) not supported, color depth (%0d-bit)\n",
-+		     pixel_freq, mhdp->video_info.color_depth);
-+		return 0;
-+	}
-+
-+	div_total = p_ctrl_table->pll_fb_div_total;
-+	vco_freq = refclk_freq_khz * div_total / p_ctrl_table->cmnda_pll0_ip_div;
-+
-+	/* Get right row from the imx8mq_pll_table table.
-+	 * Check if vco_freq_khz and feedback_div_total
-+	 * column matching with imx8mq_pll_table. */
-+	for (i = 0; i < ARRAY_SIZE(imx8mq_pll_table); i++) {
-+		if (vco_freq == imx8mq_pll_table[i].vco_freq_min &&
-+				div_total == imx8mq_pll_table[i].feedback_div_total) {
-+			p_pll_table = &imx8mq_pll_table[i];
-+			break;
-+		}
-+	}
-+	if (i == ARRAY_SIZE(imx8mq_pll_table)) {
-+		DRM_WARN("VCO (%d KHz) not supported\n", vco_freq);
-+		return 0;
-+	}
-+	DRM_INFO("VCO frequency is %d KHz\n", vco_freq);
-+
-+	ret = hdmi_phy_config(mhdp, p_ctrl_table, p_pll_table, pclk_in);
-+	if (ret == false)
-+		return 0;
-+
-+	return char_freq;
-+}
-+
-+static int hdmi_phy_cfg_ss28fdsoi(struct cdns_mhdp_device *mhdp,
-+				struct drm_display_mode *mode)
-+{
-+	const struct hdmi_ctrl *p_ctrl_table;
-+	const struct hdmi_pll_tuning *p_pll_table;
-+	const u8 pclk_in = true;
-+	u32 pixel_freq = mode->clock;
-+	u32 vco_freq, char_freq;
-+	u32 div_total, feedback_factor;
-+	u32 ret, i;
-+
-+	feedback_factor = hdmi_feedback_factor(mhdp);
-+
-+	char_freq = pixel_freq * feedback_factor / 1000;
-+
-+	DRM_INFO("Pixel clock: %d KHz, character clock: %d, bpc is %0d-bit.\n",
-+	     pixel_freq, char_freq, mhdp->video_info.color_depth);
-+
-+	/* Get right row from the ctrl_table table.
-+	 * Check if 'pixel_freq_khz' value matches the PIXEL_CLK_FREQ column.
-+	 * Consider only the rows with FEEDBACK_FACTOR column matching feedback_factor. */
-+	for (i = 0; i < ARRAY_SIZE(imx8qm_ctrl_table); i++) {
-+		if (feedback_factor == imx8qm_ctrl_table[i].feedback_factor &&
-+				pixel_freq >= imx8qm_ctrl_table[i].pixel_clk_freq_min &&
-+				pixel_freq <= imx8qm_ctrl_table[i].pixel_clk_freq_max) {
-+			p_ctrl_table = &imx8qm_ctrl_table[i];
-+			break;
-+		}
-+	}
-+	if (i == ARRAY_SIZE(imx8qm_ctrl_table)) {
-+		DRM_WARN("Pixel clk (%d KHz) not supported, color depth (%0d-bit)\n",
-+		     pixel_freq, mhdp->video_info.color_depth);
-+		return 0;
-+	}
-+
-+	div_total = p_ctrl_table->pll_fb_div_total;
-+	vco_freq = pixel_freq * div_total / p_ctrl_table->cmnda_pll0_ip_div;
-+
-+	/* Get right row from the imx8mq_pll_table table.
-+	 * Check if vco_freq_khz and feedback_div_total
-+	 * column matching with imx8mq_pll_table. */
-+	for (i = 0; i < ARRAY_SIZE(imx8qm_pll_table); i++) {
-+		if (vco_freq >= imx8qm_pll_table[i].vco_freq_min &&
-+				vco_freq < imx8qm_pll_table[i].vco_freq_max &&
-+				div_total == imx8qm_pll_table[i].feedback_div_total) {
-+			p_pll_table = &imx8qm_pll_table[i];
-+			break;
-+		}
-+	}
-+	if (i == ARRAY_SIZE(imx8qm_pll_table)) {
-+		DRM_WARN("VCO (%d KHz) not supported\n", vco_freq);
-+		return 0;
-+	}
-+	DRM_INFO("VCO frequency is %d KHz\n", vco_freq);
-+
-+	ret = hdmi_phy_config(mhdp, p_ctrl_table, p_pll_table, pclk_in);
-+	if (ret == false)
-+		return 0;
-+
-+	return char_freq;
-+}
-+
-+static int hdmi_phy_power_up(struct cdns_mhdp_device *mhdp)
-+{
-+	u32 val, i;
-+
-+	/* set Power State to A2 */
-+	cdns_phy_reg_write(mhdp, PHY_HDP_MODE_CTRL, 0x0004);
-+
-+	cdns_phy_reg_write(mhdp, TX_DIAG_ACYA_0, 1);
-+	cdns_phy_reg_write(mhdp, TX_DIAG_ACYA_1, 1);
-+	cdns_phy_reg_write(mhdp, TX_DIAG_ACYA_2, 1);
-+	cdns_phy_reg_write(mhdp, TX_DIAG_ACYA_3, 1);
-+
-+	/* Wait for Power State A2 Ack */
-+	for (i = 0; i < 10; i++) {
-+		val = cdns_phy_reg_read(mhdp, PHY_HDP_MODE_CTRL);
-+		if (val & (1 << 6))
-+			break;
-+		msleep(20);
-+	}
-+	if (i == 10) {
-+		dev_err(mhdp->dev, "Wait A2 Ack failed\n");
-+		return -1;
-+	}
-+
-+	/* Configure PHY in A0 mode (PHY must be in the A0 power
-+	 * state in order to transmit data)
-+	 */
-+	//cdns_phy_reg_write(mhdp, PHY_HDP_MODE_CTRL, 0x0101); //imx8mq
-+	cdns_phy_reg_write(mhdp, PHY_HDP_MODE_CTRL, 0x0001);
-+
-+	/* Wait for Power State A0 Ack */
-+	for (i = 0; i < 10; i++) {
-+		val = cdns_phy_reg_read(mhdp, PHY_HDP_MODE_CTRL);
-+		if (val & (1 << 4))
-+			break;
-+		msleep(20);
-+	}
-+	if (i == 10) {
-+		dev_err(mhdp->dev, "Wait A0 Ack failed\n");
-+		return -1;
-+	}
-+	return 0;
-+}
-+
-+int cdns_hdmi_phy_set_imx8mq(struct imx_mhdp_device *hdp)
-+{
-+	struct cdns_mhdp_device *mhdp = &hdp->mhdp;
-+	struct drm_display_mode *mode = &mhdp->mode;
-+	int ret;
-+
-+	/* Check HDMI FW alive before HDMI PHY init */
-+	ret = cdns_mhdp_check_alive(mhdp);
-+	if (ret == false) {
-+		DRM_ERROR("NO HDMI FW running\n");
-+		return -ENXIO;
-+	}
-+
-+	/* Configure PHY */
-+	mhdp->hdmi.char_rate = hdmi_phy_cfg_t28hpc(mhdp, mode);
-+	if (mhdp->hdmi.char_rate == 0) {
-+		DRM_ERROR("failed to set phy pclock\n");
-+		return -EINVAL;
-+	}
-+
-+	ret = hdmi_phy_power_up(mhdp);
-+	if (ret < 0)
-+		return ret;
-+
-+	hdmi_phy_set_vswing(mhdp);
-+
-+	return true;
-+}
-+
-+int cdns_hdmi_phy_set_imx8qm(struct imx_mhdp_device *hdp)
-+{
-+	struct cdns_mhdp_device *mhdp = &hdp->mhdp;
-+	struct drm_display_mode *mode = &mhdp->mode;
-+	int ret;
-+
-+	/* Check HDMI FW alive before HDMI PHY init */
-+	ret = cdns_mhdp_check_alive(mhdp);
-+	if (ret == false) {
-+		DRM_ERROR("NO HDMI FW running\n");
-+		return -ENXIO;
-+	}
-+
-+	/* Configure PHY */
-+	mhdp->hdmi.char_rate = hdmi_phy_cfg_ss28fdsoi(mhdp, mode);
-+	if (mhdp->hdmi.char_rate == 0) {
-+		DRM_ERROR("failed to set phy pclock\n");
-+		return -EINVAL;
-+	}
-+
-+	ret = hdmi_phy_power_up(mhdp);
-+	if (ret < 0)
-+		return ret;
-+
-+	hdmi_phy_set_vswing(mhdp);
-+
-+	return true;
-+}
-+
---- /dev/null
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-imx8mq.c
-@@ -0,0 +1,163 @@
-+/*
-+ * Copyright (C) 2019 NXP Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/component.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
-+#include <drm/drm_of.h>
-+#include <drm/drmP.h>
-+#include <drm/drm_crtc_helper.h>
-+#include <drm/drm_edid.h>
-+#include <drm/drm_encoder_slave.h>
-+
-+#include <drm/bridge/cdns-mhdp-imx.h>
-+#include "cdn-mhdp-phy.h"
-+#include "imx-drm.h"
-+
-+struct imx_hdmi {
-+	struct device *dev;
-+	struct drm_encoder encoder;
-+};
-+
-+static void cdns_hdmi_imx_encoder_disable(struct drm_encoder *encoder)
-+{
-+}
-+
-+static void cdns_hdmi_imx_encoder_enable(struct drm_encoder *encoder)
-+{
-+}
-+
-+static int cdns_hdmi_imx_atomic_check(struct drm_encoder *encoder,
-+				    struct drm_crtc_state *crtc_state,
-+				    struct drm_connector_state *conn_state)
-+{
-+	return 0;
-+}
-+
-+static const struct drm_encoder_helper_funcs cdns_hdmi_imx_encoder_helper_funcs = {
-+	.enable     = cdns_hdmi_imx_encoder_enable,
-+	.disable    = cdns_hdmi_imx_encoder_disable,
-+	.atomic_check = cdns_hdmi_imx_atomic_check,
-+};
-+
-+static const struct drm_encoder_funcs cdns_hdmi_imx_encoder_funcs = {
-+	.destroy = drm_encoder_cleanup,
-+};
-+
-+static struct cdn_plat_data imx8mq_hdmi_drv_data = {
-+	.bind	= cdns_hdmi_bind,
-+	.unbind	= cdns_hdmi_unbind,
-+	.phy_init = cdns_hdmi_phy_set_imx8mq,
-+};
-+
-+static struct cdn_plat_data imx8mq_dp_drv_data = {
-+	.bind	= cdns_dp_bind,
-+	.unbind	= cdns_dp_unbind,
-+	.phy_init = cdns_dp_phy_init_imx8mq,
-+};
-+
-+static const struct of_device_id cdns_hdmi_imx_dt_ids[] = {
-+	{ .compatible = "cdn,imx8mq-hdmi",
-+	  .data = &imx8mq_hdmi_drv_data
-+	},
-+	{ .compatible = "cdn,imx8mq-dp",
-+	  .data = &imx8mq_dp_drv_data
-+	},
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, cdns_hdmi_imx_dt_ids);
-+
-+static int cdns_hdmi_imx_bind(struct device *dev, struct device *master,
-+			    void *data)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	const struct cdn_plat_data *plat_data;
-+	const struct of_device_id *match;
-+	struct drm_device *drm = data;
-+	struct drm_encoder *encoder;
-+	struct imx_hdmi *hdmi;
-+	int ret;
-+
-+	if (!pdev->dev.of_node)
-+		return -ENODEV;
-+
-+	hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
-+	if (!hdmi)
-+		return -ENOMEM;
-+
-+	match = of_match_node(cdns_hdmi_imx_dt_ids, pdev->dev.of_node);
-+	plat_data = match->data;
-+	hdmi->dev = &pdev->dev;
-+	encoder = &hdmi->encoder;
-+
-+	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
-+	/*
-+	 * If we failed to find the CRTC(s) which this encoder is
-+	 * supposed to be connected to, it's because the CRTC has
-+	 * not been registered yet.  Defer probing, and hope that
-+	 * the required CRTC is added later.
-+	 */
-+	if (encoder->possible_crtcs == 0)
-+		return -EPROBE_DEFER;
-+
-+	drm_encoder_helper_add(encoder, &cdns_hdmi_imx_encoder_helper_funcs);
-+	drm_encoder_init(drm, encoder, &cdns_hdmi_imx_encoder_funcs,
-+			 DRM_MODE_ENCODER_TMDS, NULL);
-+
-+	ret = plat_data->bind(pdev, encoder, plat_data);
-+
-+	/*
-+	 * If cdns_hdmi_bind() fails we'll never call cdns_hdmi_unbind(),
-+	 * which would have called the encoder cleanup.  Do it manually.
-+	 */
-+	if (ret)
-+		drm_encoder_cleanup(encoder);
-+
-+	return ret;
-+}
-+
-+static void cdns_hdmi_imx_unbind(struct device *dev, struct device *master,
-+			       void *data)
-+{
-+	struct imx_mhdp_device *hdp = dev_get_drvdata(dev);
-+
-+	hdp->plat_data->unbind(dev);
-+}
-+
-+static const struct component_ops cdns_hdmi_imx_ops = {
-+	.bind	= cdns_hdmi_imx_bind,
-+	.unbind	= cdns_hdmi_imx_unbind,
-+};
-+
-+static int cdns_hdmi_imx_probe(struct platform_device *pdev)
-+{
-+	return component_add(&pdev->dev, &cdns_hdmi_imx_ops);
-+}
-+
-+static int cdns_hdmi_imx_remove(struct platform_device *pdev)
-+{
-+	component_del(&pdev->dev, &cdns_hdmi_imx_ops);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver cdns_hdmi_imx_platform_driver = {
-+	.probe  = cdns_hdmi_imx_probe,
-+	.remove = cdns_hdmi_imx_remove,
-+	.driver = {
-+		.name = "cdn-hdp-imx8mq",
-+		.of_match_table = cdns_hdmi_imx_dt_ids,
-+	},
-+};
-+
-+module_platform_driver(cdns_hdmi_imx_platform_driver);
-+
-+MODULE_AUTHOR("Sandor YU <sandor.yu@nxp.com>");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:cdnhdmi-imx");
---- /dev/null
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c
-@@ -0,0 +1,714 @@
-+/*
-+ * Copyright (C) 2019 NXP Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <dt-bindings/firmware/imx/rsrc.h>
-+#include <linux/clk.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/component.h>
-+#include <drm/drm_of.h>
-+#include <drm/drmP.h>
-+#include <drm/drm_crtc_helper.h>
-+#include <drm/drm_encoder_slave.h>
-+#include <linux/firmware/imx/sci.h>
-+#include <linux/regmap.h>
-+#include <linux/pm_domain.h>
-+
-+#include <drm/bridge/cdns-mhdp-imx.h>
-+#include "cdn-mhdp-phy.h"
-+#include "imx-drm.h"
-+
-+#define CSR_PIXEL_LINK_MUX_CTL		0x00
-+#define PL_MUX_CTL_VCP_OFFSET		5
-+#define PL_MUX_CTL_HCP_OFFSET		4
-+
-+#define PLL_800MHZ (800000000)
-+
-+struct imx_hdmi {
-+	struct device *dev;
-+	struct drm_encoder encoder;
-+};
-+
-+static void imx8qm_pixel_link_mux(struct imx_mhdp_device *hdp)
-+{
-+	struct drm_display_mode *mode = &hdp->mhdp.mode;
-+	u32 val;
-+
-+	val = 0x4;	/* RGB */
-+	if (hdp->dual_mode)
-+		val |= 0x2;	/* pixel link 0 and 1 are active */
-+	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
-+		val |= 1 << PL_MUX_CTL_VCP_OFFSET;
-+	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
-+		val |= 1 << PL_MUX_CTL_HCP_OFFSET;
-+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
-+		val |= 0x2;
-+
-+	regmap_write(hdp->regmap_csr, hdp->csr_pxl_mux_reg, val);
-+}
-+
-+static void imx8qm_pixel_link_valid(u32 dual_mode)
-+{
-+	struct imx_sc_ipc *handle;
-+
-+	imx_scu_get_handle(&handle);
-+
-+	imx_sc_misc_set_control(handle, IMX_SC_R_DC_0, IMX_SC_C_PXL_LINK_MST1_VLD, 1);
-+	if (dual_mode)
-+		imx_sc_misc_set_control(handle, IMX_SC_R_DC_0, IMX_SC_C_PXL_LINK_MST2_VLD, 1);
-+}
-+
-+static void imx8qm_pixel_link_invalid(u32 dual_mode)
-+{
-+	struct imx_sc_ipc *handle;
-+
-+	imx_scu_get_handle(&handle);
-+
-+	imx_sc_misc_set_control(handle, IMX_SC_R_DC_0, IMX_SC_C_PXL_LINK_MST1_VLD, 0);
-+	if (dual_mode)
-+		imx_sc_misc_set_control(handle, IMX_SC_R_DC_0, IMX_SC_C_PXL_LINK_MST2_VLD, 0);
-+}
-+
-+static void imx8qm_pixel_link_sync_enable(u32 dual_mode)
-+{
-+	struct imx_sc_ipc *handle;
-+
-+	imx_scu_get_handle(&handle);
-+
-+	if (dual_mode)
-+		imx_sc_misc_set_control(handle, IMX_SC_R_DC_0, IMX_SC_C_SYNC_CTRL, 3);
-+	else
-+		imx_sc_misc_set_control(handle, IMX_SC_R_DC_0, IMX_SC_C_SYNC_CTRL0, 1);
-+}
-+
-+static void imx8qm_pixel_link_sync_disable(u32 dual_mode)
-+{
-+	struct imx_sc_ipc *handle;
-+
-+	imx_scu_get_handle(&handle);
-+
-+	if (dual_mode)
-+		imx_sc_misc_set_control(handle, IMX_SC_R_DC_0, IMX_SC_C_SYNC_CTRL, 0);
-+	else
-+		imx_sc_misc_set_control(handle, IMX_SC_R_DC_0, IMX_SC_C_SYNC_CTRL0, 0);
-+}
-+
-+static void imx8qm_phy_reset(u8 reset)
-+{
-+	struct imx_sc_ipc *handle;
-+
-+	imx_scu_get_handle(&handle);
-+
-+	/* set the pixel link mode and pixel type */
-+	imx_sc_misc_set_control(handle, IMX_SC_R_HDMI, IMX_SC_C_PHY_RESET, reset);
-+}
-+
-+static void imx8qm_clk_mux(u8 is_dp)
-+{
-+	struct imx_sc_ipc *handle;
-+
-+	imx_scu_get_handle(&handle);
-+
-+	if (is_dp)
-+		/* Enable the 24MHz for HDP PHY */
-+		imx_sc_misc_set_control(handle, IMX_SC_R_HDMI, IMX_SC_C_MODE, 1);
-+	else
-+		imx_sc_misc_set_control(handle, IMX_SC_R_HDMI, IMX_SC_C_MODE, 0);
-+}
-+
-+int imx8qm_clocks_init(struct imx_mhdp_device *hdp)
-+{
-+	struct device *dev = hdp->mhdp.dev;
-+	struct imx_hdp_clks *clks = &hdp->clks;
-+
-+	clks->dig_pll = devm_clk_get(dev, "dig_pll");
-+	if (IS_ERR(clks->dig_pll)) {
-+		dev_warn(dev, "failed to get dig pll clk\n");
-+		return PTR_ERR(clks->dig_pll);
-+	}
-+
-+	clks->av_pll = devm_clk_get(dev, "av_pll");
-+	if (IS_ERR(clks->av_pll)) {
-+		dev_warn(dev, "failed to get av pll clk\n");
-+		return PTR_ERR(clks->av_pll);
-+	}
-+
-+	clks->clk_ipg = devm_clk_get(dev, "clk_ipg");
-+	if (IS_ERR(clks->clk_ipg)) {
-+		dev_warn(dev, "failed to get dp ipg clk\n");
-+		return PTR_ERR(clks->clk_ipg);
-+	}
-+
-+	clks->clk_core = devm_clk_get(dev, "clk_core");
-+	if (IS_ERR(clks->clk_core)) {
-+		dev_warn(dev, "failed to get hdp core clk\n");
-+		return PTR_ERR(clks->clk_core);
-+	}
-+
-+	clks->clk_pxl = devm_clk_get(dev, "clk_pxl");
-+	if (IS_ERR(clks->clk_pxl)) {
-+		dev_warn(dev, "failed to get pxl clk\n");
-+		return PTR_ERR(clks->clk_pxl);
-+	}
-+
-+	clks->clk_pxl_mux = devm_clk_get(dev, "clk_pxl_mux");
-+	if (IS_ERR(clks->clk_pxl_mux)) {
-+		dev_warn(dev, "failed to get pxl mux clk\n");
-+		return PTR_ERR(clks->clk_pxl_mux);
-+	}
-+
-+	clks->clk_pxl_link = devm_clk_get(dev, "clk_pxl_link");
-+	if (IS_ERR(clks->clk_pxl_mux)) {
-+		dev_warn(dev, "failed to get pxl link clk\n");
-+		return PTR_ERR(clks->clk_pxl_link);
-+	}
-+
-+	clks->lpcg_hdp = devm_clk_get(dev, "lpcg_hdp");
-+	if (IS_ERR(clks->lpcg_hdp)) {
-+		dev_warn(dev, "failed to get lpcg hdp clk\n");
-+		return PTR_ERR(clks->lpcg_hdp);
-+	}
-+
-+	clks->lpcg_msi = devm_clk_get(dev, "lpcg_msi");
-+	if (IS_ERR(clks->lpcg_msi)) {
-+		dev_warn(dev, "failed to get lpcg msi clk\n");
-+		return PTR_ERR(clks->lpcg_msi);
-+	}
-+
-+	clks->lpcg_pxl = devm_clk_get(dev, "lpcg_pxl");
-+	if (IS_ERR(clks->lpcg_pxl)) {
-+		dev_warn(dev, "failed to get lpcg pxl clk\n");
-+		return PTR_ERR(clks->lpcg_pxl);
-+	}
-+
-+	clks->lpcg_vif = devm_clk_get(dev, "lpcg_vif");
-+	if (IS_ERR(clks->lpcg_vif)) {
-+		dev_warn(dev, "failed to get lpcg vif clk\n");
-+		return PTR_ERR(clks->lpcg_vif);
-+	}
-+
-+	clks->lpcg_lis = devm_clk_get(dev, "lpcg_lis");
-+	if (IS_ERR(clks->lpcg_lis)) {
-+		dev_warn(dev, "failed to get lpcg lis clk\n");
-+		return PTR_ERR(clks->lpcg_lis);
-+	}
-+
-+	clks->lpcg_apb = devm_clk_get(dev, "lpcg_apb");
-+	if (IS_ERR(clks->lpcg_apb)) {
-+		dev_warn(dev, "failed to get lpcg apb clk\n");
-+		return PTR_ERR(clks->lpcg_apb);
-+	}
-+
-+	clks->lpcg_apb_csr = devm_clk_get(dev, "lpcg_apb_csr");
-+	if (IS_ERR(clks->lpcg_apb_csr)) {
-+		dev_warn(dev, "failed to get apb csr clk\n");
-+		return PTR_ERR(clks->lpcg_apb_csr);
-+	}
-+
-+	clks->lpcg_apb_ctrl = devm_clk_get(dev, "lpcg_apb_ctrl");
-+	if (IS_ERR(clks->lpcg_apb_ctrl)) {
-+		dev_warn(dev, "failed to get lpcg apb ctrl clk\n");
-+		return PTR_ERR(clks->lpcg_apb_ctrl);
-+	}
-+
-+	clks->clk_i2s_bypass = devm_clk_get(dev, "clk_i2s_bypass");
-+	if (IS_ERR(clks->clk_i2s_bypass)) {
-+		dev_err(dev, "failed to get i2s bypass clk\n");
-+		return PTR_ERR(clks->clk_i2s_bypass);
-+	}
-+
-+	clks->lpcg_i2s = devm_clk_get(dev, "lpcg_i2s");
-+	if (IS_ERR(clks->lpcg_i2s)) {
-+		dev_err(dev, "failed to get lpcg i2s clk\n");
-+		return PTR_ERR(clks->lpcg_i2s);
-+	}
-+	return true;
-+}
-+
-+static int imx8qm_pixel_clk_enable(struct imx_mhdp_device *hdp)
-+{
-+	struct imx_hdp_clks *clks = &hdp->clks;
-+	struct device *dev = hdp->mhdp.dev;
-+	int ret;
-+
-+	ret = clk_prepare_enable(clks->av_pll);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre av pll  error\n", __func__);
-+		return ret;
-+	}
-+
-+	ret = clk_prepare_enable(clks->clk_pxl);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre clk pxl error\n", __func__);
-+		return ret;
-+	}
-+	ret = clk_prepare_enable(clks->clk_pxl_mux);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre clk pxl mux error\n", __func__);
-+		return ret;
-+	}
-+
-+	ret = clk_prepare_enable(clks->clk_pxl_link);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre clk pxl link error\n", __func__);
-+		return ret;
-+	}
-+	ret = clk_prepare_enable(clks->lpcg_vif);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre clk vif error\n", __func__);
-+		return ret;
-+	}
-+	ret = clk_prepare_enable(clks->lpcg_pxl);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre lpcg pxl error\n", __func__);
-+		return ret;
-+	}
-+	ret = clk_prepare_enable(clks->lpcg_hdp);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre lpcg hdp error\n", __func__);
-+		return ret;
-+	}
-+	return ret;
-+
-+}
-+
-+static void imx8qm_pixel_clk_disable(struct imx_mhdp_device *hdp)
-+{
-+	struct imx_hdp_clks *clks = &hdp->clks;
-+
-+	clk_disable_unprepare(clks->lpcg_pxl);
-+	clk_disable_unprepare(clks->lpcg_hdp);
-+	clk_disable_unprepare(clks->lpcg_vif);
-+	clk_disable_unprepare(clks->clk_pxl);
-+	clk_disable_unprepare(clks->clk_pxl_link);
-+	clk_disable_unprepare(clks->clk_pxl_mux);
-+	clk_disable_unprepare(clks->av_pll);
-+}
-+
-+static void imx8qm_pixel_clk_set_rate(struct imx_mhdp_device *hdp, u32 pclock)
-+{
-+	struct imx_hdp_clks *clks = &hdp->clks;
-+
-+	/* pixel clock for HDMI */
-+	clk_set_rate(clks->av_pll, pclock);
-+
-+	if (hdp->dual_mode == true) {
-+		clk_set_rate(clks->clk_pxl, pclock/2);
-+		clk_set_rate(clks->clk_pxl_link, pclock/2);
-+	} else {
-+		clk_set_rate(clks->clk_pxl_link, pclock);
-+		clk_set_rate(clks->clk_pxl, pclock);
-+	}
-+	clk_set_rate(clks->clk_pxl_mux, pclock);
-+}
-+
-+static void imx8qm_pixel_clk_rate_change(struct imx_mhdp_device *hdp)
-+{
-+	/* set pixel clock before video mode setup */
-+	imx8qm_pixel_clk_disable(hdp);
-+
-+	imx8qm_pixel_clk_set_rate(hdp, hdp->mhdp.mode.clock * 1000);
-+
-+	imx8qm_pixel_clk_enable(hdp);
-+
-+	/* Config pixel link mux */
-+	imx8qm_pixel_link_mux(hdp);
-+}
-+
-+static int imx8qm_ipg_clk_enable(struct imx_mhdp_device *hdp)
-+{
-+	int ret;
-+	struct imx_hdp_clks *clks = &hdp->clks;
-+	struct device *dev = hdp->mhdp.dev;
-+
-+	ret = clk_prepare_enable(clks->dig_pll);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre dig pll error\n", __func__);
-+		return ret;
-+	}
-+
-+	ret = clk_prepare_enable(clks->clk_ipg);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre clk_ipg error\n", __func__);
-+		return ret;
-+	}
-+
-+	ret = clk_prepare_enable(clks->clk_core);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre clk core error\n", __func__);
-+		return ret;
-+	}
-+
-+	ret = clk_prepare_enable(clks->lpcg_apb);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre clk apb error\n", __func__);
-+		return ret;
-+	}
-+	ret = clk_prepare_enable(clks->lpcg_lis);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre clk lis error\n", __func__);
-+		return ret;
-+	}
-+	ret = clk_prepare_enable(clks->lpcg_msi);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre clk msierror\n", __func__);
-+		return ret;
-+	}
-+	ret = clk_prepare_enable(clks->lpcg_apb_csr);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre clk apb csr error\n", __func__);
-+		return ret;
-+	}
-+	ret = clk_prepare_enable(clks->lpcg_apb_ctrl);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre clk apb ctrl error\n", __func__);
-+		return ret;
-+	}
-+	ret = clk_prepare_enable(clks->lpcg_i2s);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre clk i2s error\n", __func__);
-+		return ret;
-+	}
-+	ret = clk_prepare_enable(clks->clk_i2s_bypass);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre clk i2s bypass error\n", __func__);
-+		return ret;
-+	}
-+	return ret;
-+}
-+
-+static void imx8qm_ipg_clk_disable(struct imx_mhdp_device *hdp)
-+{
-+	struct imx_hdp_clks *clks = &hdp->clks;
-+
-+	clk_disable_unprepare(clks->clk_i2s_bypass);
-+	clk_disable_unprepare(clks->lpcg_i2s);
-+	clk_disable_unprepare(clks->lpcg_apb_ctrl);
-+	clk_disable_unprepare(clks->lpcg_apb_csr);
-+	clk_disable_unprepare(clks->lpcg_msi);
-+	clk_disable_unprepare(clks->lpcg_lis);
-+	clk_disable_unprepare(clks->lpcg_apb);
-+	clk_disable_unprepare(clks->clk_core);
-+	clk_disable_unprepare(clks->clk_ipg);
-+	clk_disable_unprepare(clks->dig_pll);
-+}
-+
-+static void imx8qm_ipg_clk_set_rate(struct imx_mhdp_device *hdp)
-+{
-+	struct imx_hdp_clks *clks = &hdp->clks;
-+
-+	/* ipg/core clock */
-+	clk_set_rate(clks->dig_pll,  PLL_800MHZ);
-+	clk_set_rate(clks->clk_core, PLL_800MHZ/4);
-+	clk_set_rate(clks->clk_ipg,  PLL_800MHZ/8);
-+}
-+
-+static void imx8qm_detach_pm_domains(struct imx_mhdp_device *hdp)
-+{
-+	if (hdp->pd_pll1_link && !IS_ERR(hdp->pd_pll1_link))
-+		device_link_del(hdp->pd_pll1_link);
-+	if (hdp->pd_pll1_dev && !IS_ERR(hdp->pd_pll1_dev))
-+		dev_pm_domain_detach(hdp->pd_pll1_dev, true);
-+
-+	if (hdp->pd_pll0_link && !IS_ERR(hdp->pd_pll0_link))
-+		device_link_del(hdp->pd_pll0_link);
-+	if (hdp->pd_pll0_dev && !IS_ERR(hdp->pd_pll0_dev))
-+		dev_pm_domain_detach(hdp->pd_pll0_dev, true);
-+
-+	if (hdp->pd_mhdp_link && !IS_ERR(hdp->pd_mhdp_link))
-+		device_link_del(hdp->pd_mhdp_link);
-+	if (hdp->pd_mhdp_dev && !IS_ERR(hdp->pd_mhdp_dev))
-+		dev_pm_domain_detach(hdp->pd_mhdp_dev, true);
-+
-+	hdp->pd_mhdp_dev = NULL;
-+	hdp->pd_mhdp_link = NULL;
-+	hdp->pd_pll0_dev = NULL;
-+	hdp->pd_pll0_link = NULL;
-+	hdp->pd_pll1_dev = NULL;
-+	hdp->pd_pll1_link = NULL;
-+}
-+
-+static int imx8qm_attach_pm_domains(struct imx_mhdp_device *hdp)
-+{
-+	struct device *dev = hdp->mhdp.dev;
-+	u32 flags = DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE;
-+	int ret = 0;
-+
-+	hdp->pd_mhdp_dev = dev_pm_domain_attach_by_name(dev, "hdmi");
-+	if (IS_ERR(hdp->pd_mhdp_dev)) {
-+		ret = PTR_ERR(hdp->pd_mhdp_dev);
-+		dev_err(dev, "Failed to attach dc pd dev: %d\n", ret);
-+		goto fail;
-+	}
-+	hdp->pd_mhdp_link = device_link_add(dev, hdp->pd_mhdp_dev, flags);
-+	if (IS_ERR(hdp->pd_mhdp_link)) {
-+		ret = PTR_ERR(hdp->pd_mhdp_link);
-+		dev_err(dev, "Failed to add device link to dc pd dev: %d\n",
-+			ret);
-+		goto fail;
-+	}
-+
-+	hdp->pd_pll0_dev = dev_pm_domain_attach_by_name(dev, "pll0");
-+	if (IS_ERR(hdp->pd_pll0_dev)) {
-+		ret = PTR_ERR(hdp->pd_pll0_dev);
-+		dev_err(dev, "Failed to attach pll0 pd dev: %d\n", ret);
-+		goto fail;
-+	}
-+	hdp->pd_pll0_link = device_link_add(dev, hdp->pd_pll0_dev, flags);
-+	if (IS_ERR(hdp->pd_pll0_link)) {
-+		ret = PTR_ERR(hdp->pd_pll0_link);
-+		dev_err(dev, "Failed to add device link to pll0 pd dev: %d\n",
-+			ret);
-+		goto fail;
-+	}
-+
-+	hdp->pd_pll1_dev = dev_pm_domain_attach_by_name(dev, "pll1");
-+	if (IS_ERR(hdp->pd_pll1_dev)) {
-+		ret = PTR_ERR(hdp->pd_pll1_dev);
-+		dev_err(dev, "Failed to attach pll0 pd dev: %d\n", ret);
-+		goto fail;
-+	}
-+	hdp->pd_pll1_link = device_link_add(dev, hdp->pd_pll1_dev, flags);
-+	if (IS_ERR(hdp->pd_pll1_link)) {
-+		ret = PTR_ERR(hdp->pd_pll1_link);
-+		dev_err(dev, "Failed to add device link to pll1 pd dev: %d\n",
-+			ret);
-+		goto fail;
-+	}
-+fail:
-+	imx8qm_detach_pm_domains(hdp);
-+	return ret;
-+}
-+
-+static int imx8qm_firmware_init(struct imx_mhdp_device *hdp)
-+{
-+	u32 rate;
-+	int ret;
-+
-+	/* Power on PM Domains */
-+	imx8qm_attach_pm_domains(hdp);
-+
-+	/* clock init and  rate set */
-+	imx8qm_clocks_init(hdp);
-+
-+	imx8qm_ipg_clk_set_rate(hdp);
-+
-+	/* Init pixel clock with 148.5MHz before FW init */
-+	imx8qm_pixel_clk_set_rate(hdp, 148500000);
-+
-+	imx8qm_ipg_clk_enable(hdp);
-+
-+	imx8qm_clk_mux(hdp->plat_data->is_dp);
-+
-+	imx8qm_pixel_clk_enable(hdp);
-+
-+	imx8qm_phy_reset(1);
-+
-+	hdp->csr_pxl_mux_reg = 0;
-+	hdp->csr_ctrl0_reg = 0x8;
-+	hdp->csr_ctrl0_sec = 0xc;
-+	/* iMX8QM HDP register, Remap HPD memory address to low 4K */
-+	regmap_write(hdp->regmap_csr, hdp->csr_ctrl0_reg, 0);
-+
-+	/* configure HDMI/DP core clock */
-+	rate = clk_get_rate(hdp->clks.clk_core);
-+	cdns_mhdp_set_fw_clk(&hdp->mhdp, rate);
-+
-+	/* un-reset ucpu */
-+	writel(0,  (APB_CTRL << 2) + hdp->mhdp.regs);
-+	DRM_INFO("Started firmware!\n");
-+
-+	ret = cdns_mhdp_check_alive(&hdp->mhdp);
-+	if (ret == false) {
-+		DRM_ERROR("NO HDMI FW running\n");
-+		return -ENXIO;
-+	}
-+
-+	/* turn on IP activity */
-+	cdns_mhdp_set_firmware_active(&hdp->mhdp, 1);
-+
-+	DRM_INFO("HDP FW Version - ver %d verlib %d\n",
-+			__raw_readb(VER_L + hdp->mhdp.regs) + (__raw_readb(VER_H + hdp->mhdp.regs) << 8),
-+	__raw_readb(VER_LIB_L_ADDR + hdp->mhdp.regs) + (__raw_readb(VER_LIB_H_ADDR + hdp->mhdp.regs) << 8));
-+
-+	return 0;
-+}
-+
-+static void cdns_hdmi_imx_encoder_disable(struct drm_encoder *encoder)
-+{
-+	struct imx_mhdp_device *hdp = encoder->bridge->driver_private;
-+
-+	imx8qm_pixel_link_sync_disable(hdp->dual_mode);
-+	imx8qm_pixel_link_invalid(hdp->dual_mode);
-+}
-+
-+static void cdns_hdmi_imx_encoder_enable(struct drm_encoder *encoder)
-+{
-+	struct imx_mhdp_device *hdp = encoder->bridge->driver_private;
-+
-+	imx8qm_pixel_link_valid(hdp->dual_mode);
-+	imx8qm_pixel_link_sync_enable(hdp->dual_mode);
-+}
-+
-+static int cdns_hdmi_imx_encoder_atomic_check(struct drm_encoder *encoder,
-+				    struct drm_crtc_state *crtc_state,
-+				    struct drm_connector_state *conn_state)
-+{
-+	struct imx_crtc_state *imx_crtc_state = to_imx_crtc_state(crtc_state);
-+
-+	imx_crtc_state->bus_format = MEDIA_BUS_FMT_RGB101010_1X30;
-+	return 0;
-+}
-+
-+static const struct drm_encoder_helper_funcs cdns_hdmi_imx_encoder_helper_funcs = {
-+	.enable     = cdns_hdmi_imx_encoder_enable,
-+	.disable    = cdns_hdmi_imx_encoder_disable,
-+	.atomic_check = cdns_hdmi_imx_encoder_atomic_check,
-+};
-+
-+static const struct drm_encoder_funcs cdns_hdmi_imx_encoder_funcs = {
-+	.destroy = drm_encoder_cleanup,
-+};
-+
-+#if 0
-+static struct cdn_plat_data imx8mq_hdmi_drv_data = {
-+	.bind	= cdns_hdmi_bind,
-+	.unbind	= cdns_hdmi_unbind,
-+	.phy_init = cdns_hdmi_phy_set_imx8mq,
-+};
-+
-+static struct cdn_plat_data imx8mq_dp_drv_data = {
-+	.bind	= cdns_dp_bind,
-+	.unbind	= cdns_dp_unbind,
-+	.phy_init = cdns_dp_phy_init_imx8mq,
-+};
-+#endif
-+
-+static struct cdn_plat_data imx8qm_hdmi_drv_data = {
-+	.bind	= cdns_hdmi_bind,
-+	.unbind	= cdns_hdmi_unbind,
-+	.phy_init = cdns_hdmi_phy_set_imx8qm,
-+	.fw_init = imx8qm_firmware_init,
-+	.pclock_change = imx8qm_pixel_clk_rate_change,
-+};
-+
-+static struct cdn_plat_data imx8qm_dp_drv_data = {
-+	.bind	= cdns_dp_bind,
-+	.unbind	= cdns_dp_unbind,
-+	.phy_init = cdns_dp_phy_init_imx8qm,
-+	.fw_init = imx8qm_firmware_init,
-+	.pclock_change = imx8qm_pixel_clk_rate_change,
-+	.is_dp = true,
-+};
-+
-+static const struct of_device_id cdns_hdmi_imx_dt_ids[] = {
-+#if 0
-+	{ .compatible = "cdn,imx8mq-hdmi",
-+	  .data = &imx8mq_hdmi_drv_data
-+	},
-+	{ .compatible = "cdn,imx8mq-dp",
-+	  .data = &imx8mq_dp_drv_data
-+	},
-+#endif
-+	{ .compatible = "cdn,imx8qm-hdmi",
-+	  .data = &imx8qm_hdmi_drv_data
-+	},
-+	{ .compatible = "cdn,imx8qm-dp",
-+	  .data = &imx8qm_dp_drv_data
-+	},
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, cdns_hdmi_imx_dt_ids);
-+
-+static int cdns_hdmi_imx_bind(struct device *dev, struct device *master,
-+			    void *data)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	const struct cdn_plat_data *plat_data;
-+	const struct of_device_id *match;
-+	struct drm_device *drm = data;
-+	struct drm_encoder *encoder;
-+	struct imx_hdmi *hdmi;
-+	int ret;
-+
-+	if (!pdev->dev.of_node)
-+		return -ENODEV;
-+
-+	hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
-+	if (!hdmi)
-+		return -ENOMEM;
-+
-+	match = of_match_node(cdns_hdmi_imx_dt_ids, pdev->dev.of_node);
-+	plat_data = match->data;
-+	hdmi->dev = &pdev->dev;
-+	encoder = &hdmi->encoder;
-+
-+	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
-+	/*
-+	 * If we failed to find the CRTC(s) which this encoder is
-+	 * supposed to be connected to, it's because the CRTC has
-+	 * not been registered yet.  Defer probing, and hope that
-+	 * the required CRTC is added later.
-+	 */
-+	if (encoder->possible_crtcs == 0)
-+		return -EPROBE_DEFER;
-+
-+	drm_encoder_helper_add(encoder, &cdns_hdmi_imx_encoder_helper_funcs);
-+	drm_encoder_init(drm, encoder, &cdns_hdmi_imx_encoder_funcs,
-+			 DRM_MODE_ENCODER_TMDS, NULL);
-+
-+	ret = plat_data->bind(pdev, encoder, plat_data);
-+
-+	/*
-+	 * If cdns_hdmi_bind() fails we'll never call cdns_hdmi_unbind(),
-+	 * which would have called the encoder cleanup.  Do it manually.
-+	 */
-+	if (ret)
-+		drm_encoder_cleanup(encoder);
-+
-+	return ret;
-+}
-+
-+static void cdns_hdmi_imx_unbind(struct device *dev, struct device *master,
-+			       void *data)
-+{
-+	struct imx_mhdp_device *hdp = dev_get_drvdata(dev);
-+
-+	hdp->plat_data->unbind(dev);
-+}
-+
-+static const struct component_ops cdns_hdmi_imx8qm_ops = {
-+	.bind	= cdns_hdmi_imx_bind,
-+	.unbind	= cdns_hdmi_imx_unbind,
-+};
-+
-+static int cdns_hdmi_imx_probe(struct platform_device *pdev)
-+{
-+	return component_add(&pdev->dev, &cdns_hdmi_imx8qm_ops);
-+}
-+
-+static int cdns_hdmi_imx_remove(struct platform_device *pdev)
-+{
-+	component_del(&pdev->dev, &cdns_hdmi_imx8qm_ops);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver cdns_hdmi_imx_platform_driver = {
-+	.probe  = cdns_hdmi_imx_probe,
-+	.remove = cdns_hdmi_imx_remove,
-+	.driver = {
-+		.name = "cdn-hdp-imx8qm",
-+		.of_match_table = cdns_hdmi_imx_dt_ids,
-+	},
-+};
-+
-+module_platform_driver(cdns_hdmi_imx_platform_driver);
-+
-+MODULE_AUTHOR("Sandor YU <sandor.yu@nxp.com>");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:cdnhdmi-imx");
---- /dev/null
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-phy.h
-@@ -0,0 +1,153 @@
-+/*
-+ * Copyright (C) 2019 NXP Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef _CDN_DP_PHY_H
-+#define _CDN_DP_PHY_H
-+
-+#include <drm/bridge/cdns-mhdp-imx.h>
-+
-+#define CMN_SSM_BIAS_TMR                0x0022
-+#define CMN_PLLSM0_PLLEN_TMR            0x0029
-+#define CMN_PLLSM0_PLLPRE_TMR           0x002A
-+#define CMN_PLLSM0_PLLVREF_TMR          0x002B
-+#define CMN_PLLSM0_PLLLOCK_TMR          0x002C
-+#define CMN_PLLSM0_USER_DEF_CTRL        0x002F
-+#define CMN_PSM_CLK_CTRL                0x0061
-+#define CMN_CDIAG_REFCLK_CTRL           0x0062
-+#define CMN_PLL0_VCOCAL_START           0x0081
-+#define CMN_PLL0_VCOCAL_INIT_TMR        0x0084
-+#define CMN_PLL0_VCOCAL_ITER_TMR        0x0085
-+#define CMN_PLL0_INTDIV                 0x0094
-+#define CMN_PLL0_FRACDIV                0x0095
-+#define CMN_PLL0_HIGH_THR               0x0096
-+#define CMN_PLL0_DSM_DIAG               0x0097
-+#define CMN_PLL0_SS_CTRL1               0x0098
-+#define CMN_PLL0_SS_CTRL2               0x0099
-+#define CMN_ICAL_INIT_TMR               0x00C4
-+#define CMN_ICAL_ITER_TMR               0x00C5
-+#define CMN_RXCAL_INIT_TMR              0x00D4
-+#define CMN_RXCAL_ITER_TMR              0x00D5
-+#define CMN_TXPUCAL_CTRL                0x00E0
-+#define CMN_TXPUCAL_INIT_TMR            0x00E4
-+#define CMN_TXPUCAL_ITER_TMR            0x00E5
-+#define CMN_TXPDCAL_CTRL                0x00F0
-+#define CMN_TXPDCAL_INIT_TMR            0x00F4
-+#define CMN_TXPDCAL_ITER_TMR            0x00F5
-+#define CMN_ICAL_ADJ_INIT_TMR           0x0102
-+#define CMN_ICAL_ADJ_ITER_TMR           0x0103
-+#define CMN_RX_ADJ_INIT_TMR             0x0106
-+#define CMN_RX_ADJ_ITER_TMR             0x0107
-+#define CMN_TXPU_ADJ_CTRL               0x0108
-+#define CMN_TXPU_ADJ_INIT_TMR           0x010A
-+#define CMN_TXPU_ADJ_ITER_TMR           0x010B
-+#define CMN_TXPD_ADJ_CTRL               0x010c
-+#define CMN_TXPD_ADJ_INIT_TMR           0x010E
-+#define CMN_TXPD_ADJ_ITER_TMR           0x010F
-+#define CMN_DIAG_PLL0_FBH_OVRD          0x01C0
-+#define CMN_DIAG_PLL0_FBL_OVRD          0x01C1
-+#define CMN_DIAG_PLL0_OVRD              0x01C2
-+#define CMN_DIAG_PLL0_TEST_MODE         0x01C4
-+#define CMN_DIAG_PLL0_V2I_TUNE          0x01C5
-+#define CMN_DIAG_PLL0_CP_TUNE           0x01C6
-+#define CMN_DIAG_PLL0_LF_PROG           0x01C7
-+#define CMN_DIAG_PLL0_PTATIS_TUNE1      0x01C8
-+#define CMN_DIAG_PLL0_PTATIS_TUNE2      0x01C9
-+#define CMN_DIAG_PLL0_INCLK_CTRL        0x01CA
-+#define CMN_DIAG_PLL0_PXL_DIVH          0x01CB
-+#define CMN_DIAG_PLL0_PXL_DIVL          0x01CC
-+#define CMN_DIAG_HSCLK_SEL              0x01E0
-+#define CMN_DIAG_PER_CAL_ADJ            0x01EC
-+#define CMN_DIAG_CAL_CTRL               0x01ED
-+#define CMN_DIAG_ACYA                   0x01FF
-+#define XCVR_PSM_RCTRL                  0x4001
-+#define XCVR_PSM_CAL_TMR                0x4002
-+#define XCVR_PSM_A0IN_TMR               0x4003
-+#define TX_TXCC_CAL_SCLR_MULT_0         0x4047
-+#define TX_TXCC_CPOST_MULT_00_0         0x404C
-+#define TX_TXCC_MGNFS_MULT_000_0        0x4050
-+#define XCVR_DIAG_PLLDRC_CTRL           0x40E0
-+#define XCVR_DIAG_PLLDRC_CTRL           0x40E0
-+#define XCVR_DIAG_HSCLK_SEL             0x40E1
-+#define XCVR_DIAG_BIDI_CTRL             0x40E8
-+#define XCVR_DIAG_LANE_FCM_EN_MGN_TMR   0x40F2
-+#define XCVR_DIAG_LANE_FCM_EN_MGN       0x40F2
-+#define TX_PSC_A0                       0x4100
-+#define TX_PSC_A1                       0x4101
-+#define TX_PSC_A2                       0x4102
-+#define TX_PSC_A3                       0x4103
-+#define TX_RCVDET_CTRL                  0x4120
-+#define TX_RCVDET_EN_TMR                0x4122
-+#define TX_RCVDET_EN_TMR                0x4122
-+#define TX_RCVDET_ST_TMR                0x4123
-+#define TX_RCVDET_ST_TMR                0x4123
-+#define TX_BIST_CTRL                    0x4140
-+#define TX_BIST_UDDWR                   0x4141
-+#define TX_DIAG_TX_CTRL                 0x41E0
-+#define TX_DIAG_TX_DRV                  0x41E1
-+#define TX_DIAG_BGREF_PREDRV_DELAY      0x41E7
-+#define TX_DIAG_BGREF_PREDRV_DELAY      0x41E7
-+#define XCVR_PSM_RCTRL_1                0x4201
-+#define TX_TXCC_CAL_SCLR_MULT_1         0x4247
-+#define TX_TXCC_CPOST_MULT_00_1         0x424C
-+#define TX_TXCC_MGNFS_MULT_000_1        0x4250
-+#define XCVR_DIAG_PLLDRC_CTRL_1         0x42E0
-+#define XCVR_DIAG_HSCLK_SEL_1           0x42E1
-+#define XCVR_DIAG_LANE_FCM_EN_MGN_TMR_1 0x42F2
-+#define TX_RCVDET_EN_TMR_1              0x4322
-+#define TX_RCVDET_ST_TMR_1              0x4323
-+#define TX_DIAG_ACYA_0                  0x41FF
-+#define TX_DIAG_ACYA_1                  0x43FF
-+#define TX_DIAG_ACYA_2                  0x45FF
-+#define TX_DIAG_ACYA_3                  0x47FF
-+#define TX_ANA_CTRL_REG_1               0x5020
-+#define TX_ANA_CTRL_REG_2               0x5021
-+#define TXDA_COEFF_CALC                 0x5022
-+#define TX_DIG_CTRL_REG_1               0x5023
-+#define TX_DIG_CTRL_REG_2               0x5024
-+#define TXDA_CYA_AUXDA_CYA              0x5025
-+#define TX_ANA_CTRL_REG_3               0x5026
-+#define TX_ANA_CTRL_REG_4               0x5027
-+#define TX_ANA_CTRL_REG_5               0x5029
-+#define RX_PSC_A0                       0x8000
-+#define RX_PSC_CAL                      0x8006
-+#define PMA_LANE_CFG                    0xC000
-+#define PIPE_CMN_CTRL1                  0xC001
-+#define PIPE_CMN_CTRL2                  0xC002
-+#define PIPE_COM_LOCK_CFG1              0xC003
-+#define PIPE_COM_LOCK_CFG2              0xC004
-+#define PIPE_RCV_DET_INH                0xC005
-+#define PHY_HDP_MODE_CTRL               0xC008
-+#define PHY_HDP_CLK_CTL                 0xC009
-+#define STS                             0xC00F
-+#define PHY_ISO_CMN_CTRL                0xC010
-+#define PHY_ISO_CMN_CTRL                0xC010
-+#define PHY_HDP_TX_CTL_L0               0xC408
-+#define PHY_DP_TX_CTL                   0xC408
-+#define PHY_HDP_TX_CTL_L1               0xC448
-+#define PHY_HDP_TX_CTL_L2               0xC488
-+#define PHY_HDP_TX_CTL_L3               0xC4C8
-+#define PHY_PMA_CMN_CTRL1               0xC800
-+#define PMA_CMN_CTRL1                   0xC800
-+#define PHY_PMA_ISO_CMN_CTRL            0xC810
-+#define PHY_PMA_ISO_PLL_CTRL1           0xC812
-+#define PHY_PMA_ISOLATION_CTRL          0xC81F
-+#define PHY_ISOLATION_CTRL              0xC81F
-+#define PHY_PMA_ISO_XCVR_CTRL           0xCC11
-+#define PHY_PMA_ISO_LINK_MODE           0xCC12
-+#define PHY_PMA_ISO_PWRST_CTRL          0xCC13
-+#define PHY_PMA_ISO_TX_DATA_LO          0xCC14
-+#define PHY_PMA_ISO_TX_DATA_HI          0xCC15
-+#define PHY_PMA_ISO_RX_DATA_LO          0xCC16
-+#define PHY_PMA_ISO_RX_DATA_HI          0xCC17
-+
-+int cdns_dp_phy_init_imx8mq(struct imx_mhdp_device *hdp);
-+int cdns_dp_phy_init_imx8qm(struct imx_mhdp_device *hdp);
-+int cdns_hdmi_phy_set_imx8mq(struct imx_mhdp_device *hdp);
-+int cdns_hdmi_phy_set_imx8qm(struct imx_mhdp_device *hdp);
-+#endif /* _CDN_DP_PHY_H */
diff --git a/target/linux/layerscape/patches-5.4/805-display-0006-drm-bridge-cadence-Add-new-api-functions.patch b/target/linux/layerscape/patches-5.4/805-display-0006-drm-bridge-cadence-Add-new-api-functions.patch
deleted file mode 100644
index d41acfed2c..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0006-drm-bridge-cadence-Add-new-api-functions.patch
+++ /dev/null
@@ -1,864 +0,0 @@
-From ae4d4a1aa913eaafe72b252cfe93f6fad68b39f2 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Fri, 30 Aug 2019 15:02:13 +0800
-Subject: [PATCH] drm: bridge: cadence: Add new api functions
-
-Add variable lane_mapping for hdmi.
-Add new API function cdns_mhdp_bus_read/cdns_mhdp_bus_write,
-cdns_mhdp_get_fw_clk and cdns_mhdp_infoframe_set.
-Adjust some API function interface.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c     |  34 ++---
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c   | 131 +++++------------
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c | 167 +++++++++++++++-------
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-hdmi.c   |  36 +++++
- include/drm/bridge/cdns-mhdp-common.h             |  16 ++-
- 5 files changed, 219 insertions(+), 165 deletions(-)
- mode change 100644 => 100755 drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
- mode change 100644 => 100755 drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
- mode change 100644 => 100755 drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
- mode change 100644 => 100755 drivers/gpu/drm/bridge/cadence/cdns-mhdp-hdmi.c
- mode change 100644 => 100755 include/drm/bridge/cdns-mhdp-common.h
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -116,7 +116,7 @@ static void cdns_dp_mode_set(struct imx_
- {
- 	struct drm_dp_link link;
- 	struct cdns_mhdp_device *mhdp = &dp->mhdp;
--	u32 lane_mapping = mhdp->dp.lane_mapping;
-+	u32 lane_mapping = mhdp->lane_mapping;
- 	int ret;
- 	char linkid[6];
- 
-@@ -405,12 +405,12 @@ static void cdns_dp_parse_dt(struct cdns
- 	int ret;
- 
- 	ret = of_property_read_u32(of_node, "lane-mapping",
--						&mhdp->dp.lane_mapping);
-+						&mhdp->lane_mapping);
- 	if (ret) {
--		mhdp->dp.lane_mapping = 0xc6;
-+		mhdp->lane_mapping = 0xc6;
- 		dev_warn(mhdp->dev, "Failed to get lane_mapping - using default 0xc6\n");
- 	}
--	dev_info(mhdp->dev, "lane-mapping 0x%02x\n", mhdp->dp.lane_mapping);
-+	dev_info(mhdp->dev, "lane-mapping 0x%02x\n", mhdp->lane_mapping);
- 
- 	ret = of_property_read_u32(of_node, "link-rate", &mhdp->dp.link_rate);
- 	if (ret) {
-@@ -470,11 +470,11 @@ __cdns_dp_probe(struct platform_device *
- 
- 	dp->irq[IRQ_IN] = platform_get_irq_byname(pdev, "plug_in");
- 	if (dp->irq[IRQ_IN] < 0)
--		dev_info(&pdev->dev, "No plug_in irq number\n");
-+		dev_info(dev, "No plug_in irq number\n");
- 
- 	dp->irq[IRQ_OUT] = platform_get_irq_byname(pdev, "plug_out");
- 	if (dp->irq[IRQ_OUT] < 0)
--		dev_info(&pdev->dev, "No plug_out irq number\n");
-+		dev_info(dev, "No plug_out irq number\n");
- 
- 	cdns_dp_parse_dt(&dp->mhdp);
- 
-@@ -498,7 +498,7 @@ __cdns_dp_probe(struct platform_device *
- 					IRQF_ONESHOT, dev_name(dev),
- 					dp);
- 	if (ret) {
--		dev_err(&pdev->dev, "can't claim irq %d\n",
-+		dev_err(dev, "can't claim irq %d\n",
- 						dp->irq[IRQ_IN]);
- 		goto err_out;
- 	}
-@@ -509,7 +509,7 @@ __cdns_dp_probe(struct platform_device *
- 					IRQF_ONESHOT, dev_name(dev),
- 					dp);
- 	if (ret) {
--		dev_err(&pdev->dev, "can't claim irq %d\n",
-+		dev_err(dev, "can't claim irq %d\n",
- 						dp->irq[IRQ_OUT]);
- 		goto err_out;
- 	}
-@@ -521,10 +521,10 @@ __cdns_dp_probe(struct platform_device *
- 	dp->mhdp.bridge.base.driver_private = dp;
- 	dp->mhdp.bridge.base.funcs = &cdns_dp_bridge_funcs;
- #ifdef CONFIG_OF
--	dp->mhdp.bridge.base.of_node = pdev->dev.of_node;
-+	dp->mhdp.bridge.base.of_node = dev->of_node;
- #endif
- 
--	platform_set_drvdata(pdev, dp);
-+	dev_set_drvdata(dev, &dp->mhdp);
- 	
- 	dp_aux_init(&dp->mhdp, dev);
- 
-@@ -534,9 +534,9 @@ err_out:
- 	return ERR_PTR(ret);
- }
- 
--static void __cdns_dp_remove(struct imx_mhdp_device *dp)
-+static void __cdns_dp_remove(struct cdns_mhdp_device *mhdp)
- {
--	dp_aux_destroy(&dp->mhdp);
-+	dp_aux_destroy(mhdp);
- }
- 
- /* -----------------------------------------------------------------------------
-@@ -559,11 +559,11 @@ EXPORT_SYMBOL_GPL(cdns_dp_probe);
- 
- void cdns_dp_remove(struct platform_device *pdev)
- {
--	struct imx_mhdp_device *dp = platform_get_drvdata(pdev);
-+	struct cdns_mhdp_device *mhdp = platform_get_drvdata(pdev);
- 
--	drm_bridge_remove(&dp->mhdp.bridge.base);
-+	drm_bridge_remove(&mhdp->bridge.base);
- 
--	__cdns_dp_remove(dp);
-+	__cdns_dp_remove(mhdp);
- }
- EXPORT_SYMBOL_GPL(cdns_dp_remove);
- 
-@@ -593,9 +593,9 @@ EXPORT_SYMBOL_GPL(cdns_dp_bind);
- 
- void cdns_dp_unbind(struct device *dev)
- {
--	struct imx_mhdp_device *dp = dev_get_drvdata(dev);
-+	struct cdns_mhdp_device *mhdp = dev_get_drvdata(dev);
- 
--	__cdns_dp_remove(dp);
-+	__cdns_dp_remove(mhdp);
- }
- EXPORT_SYMBOL_GPL(cdns_dp_unbind);
- 
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -25,25 +25,8 @@
- #include <linux/module.h>
- #include <linux/mfd/syscon.h>
- #include <linux/mutex.h>
--#include <linux/regmap.h>
- #include <linux/of_device.h>
- 
--static void hdmi_writel(struct cdns_mhdp_device *mhdp, u32 val, u32 offset)
--{
--	struct imx_mhdp_device *hdmi = container_of(mhdp, struct imx_mhdp_device, mhdp);
--
--	/* TODO */
--	if (offset >= 0x1000 && hdmi->regmap_csr) {
--		/* Remap address to low 4K memory */
--		regmap_write(hdmi->regmap_csr, hdmi->csr_ctrl0_reg, offset >> 12);
--		writel(val, (offset & 0xfff) + mhdp->regs);
--		/* Restore address mapping */
--		regmap_write(hdmi->regmap_csr, hdmi->csr_ctrl0_reg, 0);
--
--	} else
--		writel(val, mhdp->regs + offset);
--}
--
- static int hdmi_sink_config(struct cdns_mhdp_device *mhdp)
- {
- 	struct drm_scdc *scdc = &mhdp->connector.base.display_info.hdmi.scdc;
-@@ -75,65 +58,12 @@ static int hdmi_sink_config(struct cdns_
- 	return ret;
- }
- 
--static int hdmi_lanes_config(struct cdns_mhdp_device *mhdp)
--{
--	int ret;
--
--	/* TODO */
--	/* Set the lane swapping */
--//	if (cpu_is_imx8qm())
--		ret = cdns_mhdp_reg_write(mhdp, LANES_CONFIG,
--						    F_SOURCE_PHY_LANE0_SWAP(3) |
--						    F_SOURCE_PHY_LANE1_SWAP(0) |
--						    F_SOURCE_PHY_LANE2_SWAP(1) |
--						    F_SOURCE_PHY_LANE3_SWAP(2) |
--						    F_SOURCE_PHY_COMB_BYPASS(0) |
--							F_SOURCE_PHY_20_10(1));
--#if 0
--	else
--		ret = cdns_mhdp_reg_write(mhdp, LANES_CONFIG,
--						    F_SOURCE_PHY_LANE0_SWAP(0) |
--						    F_SOURCE_PHY_LANE1_SWAP(1) |
--						    F_SOURCE_PHY_LANE2_SWAP(2) |
--						    F_SOURCE_PHY_LANE3_SWAP(3) |
--						    F_SOURCE_PHY_COMB_BYPASS(0) |
--							F_SOURCE_PHY_20_10(1));
--#endif
--	return ret;
--}
--
--static void hdmi_info_frame_set(struct cdns_mhdp_device *mhdp,
--					u8 entry_id, u8 packet_len, u8 *packet, u8 packet_type)
-+static void hdmi_lanes_config(struct cdns_mhdp_device *mhdp)
- {
--	u32 *packet32, len32;
--	u32 val, i;
--
--	/* invalidate entry */
--	val = F_ACTIVE_IDLE_TYPE(1) | F_PKT_ALLOC_ADDRESS(entry_id);
--	hdmi_writel(mhdp, val, SOURCE_PIF_PKT_ALLOC_REG);
--	hdmi_writel(mhdp, F_PKT_ALLOC_WR_EN(1), SOURCE_PIF_PKT_ALLOC_WR_EN);
--
--	/* flush fifo 1 */
--	hdmi_writel(mhdp, F_FIFO1_FLUSH(1), SOURCE_PIF_FIFO1_FLUSH);
--
--	/* write packet into memory */
--	packet32 = (u32 *)packet;
--	len32 = packet_len / 4;
--	for (i = 0; i < len32; i++)
--		hdmi_writel(mhdp, F_DATA_WR(packet32[i]), SOURCE_PIF_DATA_WR);
--
--	/* write entry id */
--	hdmi_writel(mhdp, F_WR_ADDR(entry_id), SOURCE_PIF_WR_ADDR);
--
--	/* write request */
--	hdmi_writel(mhdp, F_HOST_WR(1), SOURCE_PIF_WR_REQ);
--
--	/* update entry */
--	val =  F_ACTIVE_IDLE_TYPE(1) | F_TYPE_VALID(1) |
--			F_PACKET_TYPE(packet_type) | F_PKT_ALLOC_ADDRESS(entry_id);
--	hdmi_writel(mhdp, val, SOURCE_PIF_PKT_ALLOC_REG);
--
--	hdmi_writel(mhdp, F_PKT_ALLOC_WR_EN(1), SOURCE_PIF_PKT_ALLOC_WR_EN);
-+	/* Line swaping */
-+	/* For imx8qm lane_mapping = 0x93
-+	 * For imx8mq lane_mapping = 0xe4*/
-+	cdns_mhdp_reg_write(mhdp, LANES_CONFIG, 0x00400000 | mhdp->lane_mapping);
- }
- 
- #define RGB_ALLOWED_COLORIMETRY (BIT(HDMI_EXTENDED_COLORIMETRY_BT2020) |\
-@@ -148,9 +78,11 @@ static int hdmi_avi_info_set(struct cdns
- 				struct drm_display_mode *mode)
- {
- 	struct hdmi_avi_infoframe frame;
--//	struct drm_display_info *di = &mhdp->connector.base.display_info;
--//	enum hdmi_extended_colorimetry ext_col;
--//	u32 sink_col, allowed_col;
-+#if 0
-+	struct drm_display_info *di = &mhdp->connector.base.display_info;
-+	enum hdmi_extended_colorimetry ext_col;
-+	u32 sink_col, allowed_col;
-+#endif
- 	int format = mhdp->video_info.color_fmt;
- 	u8 buf[32];
- 	int ret;
-@@ -209,7 +141,7 @@ static int hdmi_avi_info_set(struct cdns
- 	}
- 
- 	buf[0] = 0;
--	hdmi_info_frame_set(mhdp, 0, sizeof(buf), buf, HDMI_INFOFRAME_TYPE_AVI);
-+	cdns_mhdp_infoframe_set(mhdp, 0, sizeof(buf), buf, HDMI_INFOFRAME_TYPE_AVI);
- 	return 0;
- }
- 
-@@ -234,7 +166,7 @@ static int hdmi_vendor_info_set(struct c
- 	}
- 
- 	buf[0] = 0;
--	hdmi_info_frame_set(mhdp, 3, sizeof(buf), buf, HDMI_INFOFRAME_TYPE_VENDOR);
-+	cdns_mhdp_infoframe_set(mhdp, 3, sizeof(buf), buf, HDMI_INFOFRAME_TYPE_VENDOR);
- 	return 0;
- }
- 
-@@ -464,6 +396,19 @@ static irqreturn_t cdns_hdmi_irq_thread(
- 	return IRQ_HANDLED;
- }
- 
-+static void cdns_hdmi_parse_dt(struct cdns_mhdp_device *mhdp)
-+{
-+	struct device_node *of_node = mhdp->dev->of_node;
-+	int ret;
-+
-+	ret = of_property_read_u32(of_node, "lane-mapping", &mhdp->lane_mapping);
-+	if (ret) {
-+		mhdp->lane_mapping = 0xc6;
-+		dev_warn(mhdp->dev, "Failed to get lane_mapping - using default 0xc6\n");
-+	}
-+	dev_info(mhdp->dev, "lane-mapping 0x%02x\n", mhdp->lane_mapping);
-+}
-+
- static struct imx_mhdp_device *
- __cdns_hdmi_probe(struct platform_device *pdev,
- 			const struct cdn_plat_data *plat_data)
-@@ -503,13 +448,13 @@ __cdns_hdmi_probe(struct platform_device
- 
- 	hdmi->irq[IRQ_IN] = platform_get_irq_byname(pdev, "plug_in");
- 	if (hdmi->irq[IRQ_IN] < 0) {
--		dev_info(&pdev->dev, "No plug_in irq number\n");
-+		dev_info(dev, "No plug_in irq number\n");
- 		return ERR_PTR(-EPROBE_DEFER);
- 	}
- 
- 	hdmi->irq[IRQ_OUT] = platform_get_irq_byname(pdev, "plug_out");
- 	if (hdmi->irq[IRQ_OUT] < 0) {
--		dev_info(&pdev->dev, "No plug_out irq number\n");
-+		dev_info(dev, "No plug_out irq number\n");
- 		return ERR_PTR(-EPROBE_DEFER);
- 	}
- 
-@@ -533,7 +478,7 @@ __cdns_hdmi_probe(struct platform_device
- 					IRQF_ONESHOT, dev_name(dev),
- 					hdmi);
- 	if (ret) {
--		dev_err(&pdev->dev, "can't claim irq %d\n",
-+		dev_err(dev, "can't claim irq %d\n",
- 						hdmi->irq[IRQ_IN]);
- 		goto err_out;
- 	}
-@@ -544,11 +489,13 @@ __cdns_hdmi_probe(struct platform_device
- 					IRQF_ONESHOT, dev_name(dev),
- 					hdmi);
- 	if (ret) {
--		dev_err(&pdev->dev, "can't claim irq %d\n",
-+		dev_err(dev, "can't claim irq %d\n",
- 						hdmi->irq[IRQ_OUT]);
- 		goto err_out;
- 	}
- 
-+	cdns_hdmi_parse_dt(&hdmi->mhdp);
-+
- 	if (cdns_mhdp_read_hpd(&hdmi->mhdp))
- 		enable_irq(hdmi->irq[IRQ_OUT]);
- 	else
-@@ -557,14 +504,14 @@ __cdns_hdmi_probe(struct platform_device
- 	hdmi->mhdp.bridge.base.driver_private = hdmi;
- 	hdmi->mhdp.bridge.base.funcs = &cdns_hdmi_bridge_funcs;
- #ifdef CONFIG_OF
--	hdmi->mhdp.bridge.base.of_node = pdev->dev.of_node;
-+	hdmi->mhdp.bridge.base.of_node = dev->of_node;
- #endif
- 
- 	memset(&pdevinfo, 0, sizeof(pdevinfo));
- 	pdevinfo.parent = dev;
- 	pdevinfo.id = PLATFORM_DEVID_AUTO;
- 
--	platform_set_drvdata(pdev, hdmi);
-+	dev_set_drvdata(dev, &hdmi->mhdp);
- 
- 	return hdmi;
- 
-@@ -573,7 +520,7 @@ err_out:
- 	return ERR_PTR(ret);
- }
- 
--static void __cdns_hdmi_remove(struct imx_mhdp_device *hdmi)
-+static void __cdns_hdmi_remove(struct cdns_mhdp_device *mhdp)
- {
- }
- 
-@@ -597,11 +544,11 @@ EXPORT_SYMBOL_GPL(cdns_hdmi_probe);
- 
- void cdns_hdmi_remove(struct platform_device *pdev)
- {
--	struct imx_mhdp_device *hdmi = platform_get_drvdata(pdev);
-+	struct cdns_mhdp_device *mhdp = platform_get_drvdata(pdev);
- 
--	drm_bridge_remove(&hdmi->mhdp.bridge.base);
-+	drm_bridge_remove(&mhdp->bridge.base);
- 
--	__cdns_hdmi_remove(hdmi);
-+	__cdns_hdmi_remove(mhdp);
- }
- EXPORT_SYMBOL_GPL(cdns_hdmi_remove);
- 
-@@ -631,9 +578,9 @@ EXPORT_SYMBOL_GPL(cdns_hdmi_bind);
- 
- void cdns_hdmi_unbind(struct device *dev)
- {
--	struct imx_mhdp_device *hdmi = dev_get_drvdata(dev);
-+	struct cdns_mhdp_device *mhdp = dev_get_drvdata(dev);
- 
--	__cdns_hdmi_remove(hdmi);
-+	__cdns_hdmi_remove(mhdp);
- }
- EXPORT_SYMBOL_GPL(cdns_hdmi_unbind);
- 
---- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
-@@ -23,8 +23,10 @@
- #include <asm/unaligned.h>
- 
- #include <drm/bridge/cdns-mhdp-common.h>
-+#include <drm/bridge/cdns-mhdp-imx.h>
- #include <drm/drm_modes.h>
- #include <drm/drm_print.h>
-+#include <linux/regmap.h>
- 
- #define CDNS_DP_SPDIF_CLK		200000000
- #define FW_ALIVE_TIMEOUT_US		1000000
-@@ -33,6 +35,27 @@
- #define LINK_TRAINING_RETRY_MS		20
- #define LINK_TRAINING_TIMEOUT_MS	500
- 
-+#define mhdp_readx_poll_timeout(op, addr, offset, val, cond, sleep_us, timeout_us)	\
-+({ \
-+	u64 __timeout_us = (timeout_us); \
-+	unsigned long __sleep_us = (sleep_us); \
-+	ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
-+	might_sleep_if((__sleep_us) != 0); \
-+	for (;;) { \
-+		(val) = op(addr, offset); \
-+		if (cond) \
-+			break; \
-+		if (__timeout_us && \
-+		    ktime_compare(ktime_get(), __timeout) > 0) { \
-+			(val) = op(addr, offset); \
-+			break; \
-+		} \
-+		if (__sleep_us) \
-+			usleep_range((__sleep_us >> 2) + 1, __sleep_us); \
-+	} \
-+	(cond) ? 0 : -ETIMEDOUT; \
-+})
-+
- static inline u32 get_unaligned_be24(const void *p)
- {
- 	const u8 *_p = p;
-@@ -49,9 +72,51 @@ static inline void put_unaligned_be24(u3
- 	_p[2] = val;
- }
- 
-+u32 cdns_mhdp_bus_read(struct cdns_mhdp_device *mhdp, u32 offset)
-+{
-+	struct imx_mhdp_device *hdmi = container_of(mhdp, struct imx_mhdp_device, mhdp);
-+	u32 val;
-+
-+	/* TODO */
-+	if (offset >= 0x1000 && hdmi->regmap_csr) {
-+		/* Remap address to low 4K memory */
-+		regmap_write(hdmi->regmap_csr, hdmi->csr_ctrl0_reg, offset >> 12);
-+		val = readl((offset & 0xfff) + mhdp->regs);
-+		/* Restore address mapping */
-+		regmap_write(hdmi->regmap_csr, hdmi->csr_ctrl0_reg, 0);
-+	} else
-+		val = readl(mhdp->regs + offset);
-+
-+	return val;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_bus_read);
-+
-+void cdns_mhdp_bus_write(u32 val, struct cdns_mhdp_device *mhdp, u32 offset)
-+{
-+	struct imx_mhdp_device *hdmi = container_of(mhdp, struct imx_mhdp_device, mhdp);
-+
-+	/* TODO */
-+	if (offset >= 0x1000 && hdmi->regmap_csr) {
-+		/* Remap address to low 4K memory */
-+		regmap_write(hdmi->regmap_csr, hdmi->csr_ctrl0_reg, offset >> 12);
-+		writel(val, (offset & 0xfff) + mhdp->regs);
-+		/* Restore address mapping */
-+		regmap_write(hdmi->regmap_csr, hdmi->csr_ctrl0_reg, 0);
-+
-+	} else
-+		writel(val, mhdp->regs + offset);
-+}
-+EXPORT_SYMBOL(cdns_mhdp_bus_write);
-+
-+u32 cdns_mhdp_get_fw_clk(struct cdns_mhdp_device *mhdp)
-+{
-+	return cdns_mhdp_bus_read(mhdp, SW_CLK_H);
-+}
-+EXPORT_SYMBOL(cdns_mhdp_get_fw_clk);
-+
- void cdns_mhdp_set_fw_clk(struct cdns_mhdp_device *mhdp, unsigned long clk)
- {
--	writel(clk / 1000000, mhdp->regs + SW_CLK_H);
-+	cdns_mhdp_bus_write(clk / 1000000, mhdp, SW_CLK_H);
- }
- EXPORT_SYMBOL(cdns_mhdp_set_fw_clk);
- 
-@@ -71,16 +136,16 @@ void cdns_mhdp_clock_reset(struct cdns_m
- 	      DPTX_SYS_CLK_EN |
- 	      CFG_DPTX_VIF_CLK_RSTN_EN |
- 	      CFG_DPTX_VIF_CLK_EN;
--	writel(val, mhdp->regs + SOURCE_DPTX_CAR);
-+	cdns_mhdp_bus_write(val, mhdp, SOURCE_DPTX_CAR);
- 
- 	val = SOURCE_PHY_RSTN_EN | SOURCE_PHY_CLK_EN;
--	writel(val, mhdp->regs + SOURCE_PHY_CAR);
-+	cdns_mhdp_bus_write(val, mhdp, SOURCE_PHY_CAR);
- 
- 	val = SOURCE_PKT_SYS_RSTN_EN |
- 	      SOURCE_PKT_SYS_CLK_EN |
- 	      SOURCE_PKT_DATA_RSTN_EN |
- 	      SOURCE_PKT_DATA_CLK_EN;
--	writel(val, mhdp->regs + SOURCE_PKT_CAR);
-+	cdns_mhdp_bus_write(val, mhdp, SOURCE_PKT_CAR);
- 
- 	val = SPDIF_CDR_CLK_RSTN_EN |
- 	      SPDIF_CDR_CLK_EN |
-@@ -88,20 +153,20 @@ void cdns_mhdp_clock_reset(struct cdns_m
- 	      SOURCE_AIF_SYS_CLK_EN |
- 	      SOURCE_AIF_CLK_RSTN_EN |
- 	      SOURCE_AIF_CLK_EN;
--	writel(val, mhdp->regs + SOURCE_AIF_CAR);
-+	cdns_mhdp_bus_write(val, mhdp, SOURCE_AIF_CAR);
- 
- 	val = SOURCE_CIPHER_SYSTEM_CLK_RSTN_EN |
- 	      SOURCE_CIPHER_SYS_CLK_EN |
- 	      SOURCE_CIPHER_CHAR_CLK_RSTN_EN |
- 	      SOURCE_CIPHER_CHAR_CLK_EN;
--	writel(val, mhdp->regs + SOURCE_CIPHER_CAR);
-+	cdns_mhdp_bus_write(val, mhdp, SOURCE_CIPHER_CAR);
- 
- 	val = SOURCE_CRYPTO_SYS_CLK_RSTN_EN |
- 	      SOURCE_CRYPTO_SYS_CLK_EN;
--	writel(val, mhdp->regs + SOURCE_CRYPTO_CAR);
-+	cdns_mhdp_bus_write(val, mhdp, SOURCE_CRYPTO_CAR);
- 
- 	/* enable Mailbox and PIF interrupt */
--	writel(0, mhdp->regs + APB_INT_MASK);
-+	cdns_mhdp_bus_write(0, mhdp, APB_INT_MASK);
- }
- EXPORT_SYMBOL(cdns_mhdp_clock_reset);
- 
-@@ -109,13 +174,13 @@ int cdns_mhdp_mailbox_read(struct cdns_m
- {
- 	int val, ret;
- 
--	ret = readx_poll_timeout(readl, mhdp->regs + MAILBOX_EMPTY_ADDR,
-+	ret = mhdp_readx_poll_timeout(cdns_mhdp_bus_read, mhdp, MAILBOX_EMPTY_ADDR,
- 				 val, !val, MAILBOX_RETRY_US,
- 				 MAILBOX_TIMEOUT_US);
- 	if (ret < 0)
- 		return ret;
- 
--	return readl(mhdp->regs + MAILBOX0_RD_DATA) & 0xff;
-+	return cdns_mhdp_bus_read(mhdp, MAILBOX0_RD_DATA) & 0xff;
- }
- EXPORT_SYMBOL(cdns_mhdp_mailbox_read);
- 
-@@ -123,13 +188,13 @@ static int cdp_dp_mailbox_write(struct c
- {
- 	int ret, full;
- 
--	ret = readx_poll_timeout(readl, mhdp->regs + MAILBOX_FULL_ADDR,
-+	ret = mhdp_readx_poll_timeout(cdns_mhdp_bus_read, mhdp, MAILBOX_FULL_ADDR,
- 				 full, !full, MAILBOX_RETRY_US,
- 				 MAILBOX_TIMEOUT_US);
- 	if (ret < 0)
- 		return ret;
- 
--	writel(val, mhdp->regs + MAILBOX0_WR_DATA);
-+	cdns_mhdp_bus_write(val, mhdp, MAILBOX0_WR_DATA);
- 
- 	return 0;
- }
-@@ -357,20 +422,20 @@ int cdns_mhdp_load_firmware(struct cdns_
- 	int i, ret;
- 
- 	/* reset ucpu before load firmware*/
--	writel(APB_IRAM_PATH | APB_DRAM_PATH | APB_XT_RESET,
--	       mhdp->regs + APB_CTRL);
-+	cdns_mhdp_bus_write(APB_IRAM_PATH | APB_DRAM_PATH | APB_XT_RESET,
-+	       mhdp, APB_CTRL);
- 
- 	for (i = 0; i < i_size; i += 4)
--		writel(*i_mem++, mhdp->regs + ADDR_IMEM + i);
-+		cdns_mhdp_bus_write(*i_mem++, mhdp, ADDR_IMEM + i);
- 
- 	for (i = 0; i < d_size; i += 4)
--		writel(*d_mem++, mhdp->regs + ADDR_DMEM + i);
-+		cdns_mhdp_bus_write(*d_mem++, mhdp, ADDR_DMEM + i);
- 
- 	/* un-reset ucpu */
--	writel(0, mhdp->regs + APB_CTRL);
-+	cdns_mhdp_bus_write(0, mhdp, APB_CTRL);
- 
- 	/* check the keep alive register to make sure fw working */
--	ret = readx_poll_timeout(readl, mhdp->regs + KEEP_ALIVE,
-+	ret = mhdp_readx_poll_timeout(cdns_mhdp_bus_read, mhdp, KEEP_ALIVE,
- 				 reg, reg, 2000, FW_ALIVE_TIMEOUT_US);
- 	if (ret < 0) {
- 		DRM_DEV_ERROR(mhdp->dev, "failed to loaded the FW reg = %x\n",
-@@ -378,13 +443,13 @@ int cdns_mhdp_load_firmware(struct cdns_
- 		return -EINVAL;
- 	}
- 
--	reg = readl(mhdp->regs + VER_L) & 0xff;
-+	reg = cdns_mhdp_bus_read(mhdp, VER_L) & 0xff;
- 	mhdp->fw_version = reg;
--	reg = readl(mhdp->regs + VER_H) & 0xff;
-+	reg = cdns_mhdp_bus_read(mhdp, VER_H) & 0xff;
- 	mhdp->fw_version |= reg << 8;
--	reg = readl(mhdp->regs + VER_LIB_L_ADDR) & 0xff;
-+	reg = cdns_mhdp_bus_read(mhdp, VER_LIB_L_ADDR) & 0xff;
- 	mhdp->fw_version |= reg << 16;
--	reg = readl(mhdp->regs + VER_LIB_H_ADDR) & 0xff;
-+	reg = cdns_mhdp_bus_read(mhdp, VER_LIB_H_ADDR) & 0xff;
- 	mhdp->fw_version |= reg << 24;
- 
- 	DRM_DEV_DEBUG(mhdp->dev, "firmware version: %x\n", mhdp->fw_version);
-@@ -466,7 +531,7 @@ int cdns_mhdp_event_config(struct cdns_m
- 
- 	memset(msg, 0, sizeof(msg));
- 
--	msg[0] = DPTX_EVENT_ENABLE_HPD | DPTX_EVENT_ENABLE_TRAINING;
-+	msg[0] = MHDP_EVENT_ENABLE_HPD | MHDP_EVENT_ENABLE_TRAINING;
- 
- 	ret = cdns_mhdp_mailbox_send(mhdp, MB_MODULE_ID_DP_TX,
- 				     DPTX_ENABLE_EVENT, sizeof(msg), msg);
-@@ -479,7 +544,7 @@ EXPORT_SYMBOL(cdns_mhdp_event_config);
- 
- u32 cdns_mhdp_get_event(struct cdns_mhdp_device *mhdp)
- {
--	return readl(mhdp->regs + SW_EVENTS0);
-+	return cdns_mhdp_bus_read(mhdp, SW_EVENTS0);
- }
- EXPORT_SYMBOL(cdns_mhdp_get_event);
- 
-@@ -883,24 +948,24 @@ int cdns_mhdp_audio_stop(struct cdns_mhd
- 		return ret;
- 	}
- 
--	writel(0, mhdp->regs + SPDIF_CTRL_ADDR);
-+	cdns_mhdp_bus_write(0, mhdp, SPDIF_CTRL_ADDR);
- 
- 	/* clearn the audio config and reset */
--	writel(0, mhdp->regs + AUDIO_SRC_CNTL);
--	writel(0, mhdp->regs + AUDIO_SRC_CNFG);
--	writel(AUDIO_SW_RST, mhdp->regs + AUDIO_SRC_CNTL);
--	writel(0, mhdp->regs + AUDIO_SRC_CNTL);
-+	cdns_mhdp_bus_write(0, mhdp, AUDIO_SRC_CNTL);
-+	cdns_mhdp_bus_write(0, mhdp, AUDIO_SRC_CNFG);
-+	cdns_mhdp_bus_write(AUDIO_SW_RST, mhdp, AUDIO_SRC_CNTL);
-+	cdns_mhdp_bus_write(0, mhdp, AUDIO_SRC_CNTL);
- 
- 	/* reset smpl2pckt component  */
--	writel(0, mhdp->regs + SMPL2PKT_CNTL);
--	writel(AUDIO_SW_RST, mhdp->regs + SMPL2PKT_CNTL);
--	writel(0, mhdp->regs + SMPL2PKT_CNTL);
-+	cdns_mhdp_bus_write(0, mhdp, SMPL2PKT_CNTL);
-+	cdns_mhdp_bus_write(AUDIO_SW_RST, mhdp, SMPL2PKT_CNTL);
-+	cdns_mhdp_bus_write(0, mhdp, SMPL2PKT_CNTL);
- 
- 	/* reset FIFO */
--	writel(AUDIO_SW_RST, mhdp->regs + FIFO_CNTL);
--	writel(0, mhdp->regs + FIFO_CNTL);
-+	cdns_mhdp_bus_write(AUDIO_SW_RST, mhdp, FIFO_CNTL);
-+	cdns_mhdp_bus_write(0, mhdp, FIFO_CNTL);
- 
--	if (audio->format == AFMT_SPDIF)
-+	if (audio->format == AFMT_SPDIF_INT)
- 		clk_disable_unprepare(mhdp->spdif_clk);
- 
- 	return 0;
-@@ -936,15 +1001,15 @@ static void cdns_mhdp_audio_config_i2s(s
- 		i2s_port_en_val = 3;
- 	}
- 
--	writel(0x0, mhdp->regs + SPDIF_CTRL_ADDR);
-+	cdns_mhdp_bus_write(0x0, mhdp, SPDIF_CTRL_ADDR);
- 
--	writel(SYNC_WR_TO_CH_ZERO, mhdp->regs + FIFO_CNTL);
-+	cdns_mhdp_bus_write(SYNC_WR_TO_CH_ZERO, mhdp, FIFO_CNTL);
- 
- 	val = MAX_NUM_CH(audio->channels);
- 	val |= NUM_OF_I2S_PORTS(audio->channels);
- 	val |= AUDIO_TYPE_LPCM;
- 	val |= CFG_SUB_PCKT_NUM(sub_pckt_num);
--	writel(val, mhdp->regs + SMPL2PKT_CNFG);
-+	cdns_mhdp_bus_write(val, mhdp, SMPL2PKT_CNFG);
- 
- 	if (audio->sample_width == 16)
- 		val = 0;
-@@ -956,7 +1021,7 @@ static void cdns_mhdp_audio_config_i2s(s
- 	val |= AUDIO_CH_NUM(audio->channels);
- 	val |= I2S_DEC_PORT_EN(i2s_port_en_val);
- 	val |= TRANS_SMPL_WIDTH_32;
--	writel(val, mhdp->regs + AUDIO_SRC_CNFG);
-+	cdns_mhdp_bus_write(val, mhdp, AUDIO_SRC_CNFG);
- 
- 	for (i = 0; i < (audio->channels + 1) / 2; i++) {
- 		if (audio->sample_width == 16)
-@@ -965,7 +1030,7 @@ static void cdns_mhdp_audio_config_i2s(s
- 			val = (0x0b << 8) | (0x0b << 20);
- 
- 		val |= ((2 * i) << 4) | ((2 * i + 1) << 16);
--		writel(val, mhdp->regs + STTS_BIT_CH(i));
-+		cdns_mhdp_bus_write(val, mhdp, STTS_BIT_CH(i));
- 	}
- 
- 	switch (audio->sample_rate) {
-@@ -999,24 +1064,24 @@ static void cdns_mhdp_audio_config_i2s(s
- 		break;
- 	}
- 	val |= 4;
--	writel(val, mhdp->regs + COM_CH_STTS_BITS);
-+	cdns_mhdp_bus_write(val, mhdp, COM_CH_STTS_BITS);
- 
--	writel(SMPL2PKT_EN, mhdp->regs + SMPL2PKT_CNTL);
--	writel(I2S_DEC_START, mhdp->regs + AUDIO_SRC_CNTL);
-+	cdns_mhdp_bus_write(SMPL2PKT_EN, mhdp, SMPL2PKT_CNTL);
-+	cdns_mhdp_bus_write(I2S_DEC_START, mhdp, AUDIO_SRC_CNTL);
- }
- 
- static void cdns_mhdp_audio_config_spdif(struct cdns_mhdp_device *mhdp)
- {
- 	u32 val;
- 
--	writel(SYNC_WR_TO_CH_ZERO, mhdp->regs + FIFO_CNTL);
-+	cdns_mhdp_bus_write(SYNC_WR_TO_CH_ZERO, mhdp, FIFO_CNTL);
- 
- 	val = MAX_NUM_CH(2) | AUDIO_TYPE_LPCM | CFG_SUB_PCKT_NUM(4);
--	writel(val, mhdp->regs + SMPL2PKT_CNFG);
--	writel(SMPL2PKT_EN, mhdp->regs + SMPL2PKT_CNTL);
-+	cdns_mhdp_bus_write(val, mhdp, SMPL2PKT_CNFG);
-+	cdns_mhdp_bus_write(SMPL2PKT_EN, mhdp, SMPL2PKT_CNTL);
- 
- 	val = SPDIF_ENABLE | SPDIF_AVG_SEL | SPDIF_JITTER_BYPASS;
--	writel(val, mhdp->regs + SPDIF_CTRL_ADDR);
-+	cdns_mhdp_bus_write(val, mhdp, SPDIF_CTRL_ADDR);
- 
- 	clk_prepare_enable(mhdp->spdif_clk);
- 	clk_set_rate(mhdp->spdif_clk, CDNS_DP_SPDIF_CLK);
-@@ -1028,7 +1093,7 @@ int cdns_mhdp_audio_config(struct cdns_m
- 	int ret;
- 
- 	/* reset the spdif clk before config */
--	if (audio->format == AFMT_SPDIF) {
-+	if (audio->format == AFMT_SPDIF_INT) {
- 		reset_control_assert(mhdp->spdif_rst);
- 		reset_control_deassert(mhdp->spdif_rst);
- 	}
-@@ -1043,7 +1108,7 @@ int cdns_mhdp_audio_config(struct cdns_m
- 
- 	if (audio->format == AFMT_I2S)
- 		cdns_mhdp_audio_config_i2s(mhdp, audio);
--	else if (audio->format == AFMT_SPDIF)
-+	else if (audio->format == AFMT_SPDIF_INT)
- 		cdns_mhdp_audio_config_spdif(mhdp);
- 
- 	ret = cdns_mhdp_reg_write(mhdp, AUDIO_PACK_CONTROL, AUDIO_PACK_EN);
-@@ -1150,12 +1215,12 @@ bool cdns_mhdp_check_alive(struct cdns_m
- 	u32  alive, newalive;
- 	u8 retries_left = 10;
- 
--	alive = readl(mhdp->regs + KEEP_ALIVE);
-+	alive = cdns_mhdp_bus_read(mhdp, KEEP_ALIVE);
- 
- 	while (retries_left--) {
- 		udelay(2);
- 
--		newalive = readl(mhdp->regs + KEEP_ALIVE);
-+		newalive = cdns_mhdp_bus_read(mhdp, KEEP_ALIVE);
- 		if (alive == newalive)
- 			continue;
- 		return true;
---- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp-hdmi.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-hdmi.c
-@@ -10,6 +10,42 @@
- #include <drm/drmP.h>
- #include <linux/io.h>
- #include <drm/bridge/cdns-mhdp-common.h>
-+#include <drm/bridge/cdns-mhdp-imx.h>
-+#include <linux/regmap.h>
-+
-+void cdns_mhdp_infoframe_set(struct cdns_mhdp_device *mhdp,
-+					u8 entry_id, u8 packet_len, u8 *packet, u8 packet_type)
-+{
-+	u32 *packet32, len32;
-+	u32 val, i;
-+
-+	/* invalidate entry */
-+	val = F_ACTIVE_IDLE_TYPE(1) | F_PKT_ALLOC_ADDRESS(entry_id);
-+	cdns_mhdp_bus_write(val, mhdp, SOURCE_PIF_PKT_ALLOC_REG);
-+	cdns_mhdp_bus_write(F_PKT_ALLOC_WR_EN(1), mhdp, SOURCE_PIF_PKT_ALLOC_WR_EN);
-+
-+	/* flush fifo 1 */
-+	cdns_mhdp_bus_write(F_FIFO1_FLUSH(1), mhdp, SOURCE_PIF_FIFO1_FLUSH);
-+
-+	/* write packet into memory */
-+	packet32 = (u32 *)packet;
-+	len32 = packet_len / 4;
-+	for (i = 0; i < len32; i++)
-+		cdns_mhdp_bus_write(F_DATA_WR(packet32[i]), mhdp, SOURCE_PIF_DATA_WR);
-+
-+	/* write entry id */
-+	cdns_mhdp_bus_write(F_WR_ADDR(entry_id), mhdp, SOURCE_PIF_WR_ADDR);
-+
-+	/* write request */
-+	cdns_mhdp_bus_write(F_HOST_WR(1), mhdp, SOURCE_PIF_WR_REQ);
-+
-+	/* update entry */
-+	val =  F_ACTIVE_IDLE_TYPE(1) | F_TYPE_VALID(1) |
-+			F_PACKET_TYPE(packet_type) | F_PKT_ALLOC_ADDRESS(entry_id);
-+	cdns_mhdp_bus_write(val, mhdp, SOURCE_PIF_PKT_ALLOC_REG);
-+
-+	cdns_mhdp_bus_write(F_PKT_ALLOC_WR_EN(1), mhdp, SOURCE_PIF_PKT_ALLOC_WR_EN);
-+}
- 
- int cdns_hdmi_get_edid_block(void *data, u8 *edid,
- 			  u32 block, size_t length)
---- a/include/drm/bridge/cdns-mhdp-common.h
-+++ b/include/drm/bridge/cdns-mhdp-common.h
-@@ -391,8 +391,8 @@
- #define FW_STANDBY				0
- #define FW_ACTIVE				1
- 
--#define DPTX_EVENT_ENABLE_HPD			BIT(0)
--#define DPTX_EVENT_ENABLE_TRAINING		BIT(1)
-+#define MHDP_EVENT_ENABLE_HPD			BIT(0)
-+#define MHDP_EVENT_ENABLE_TRAINING		BIT(1)
- 
- #define LINK_TRAINING_NOT_ACTIVE		0
- #define LINK_TRAINING_RUN			1
-@@ -532,7 +532,8 @@ enum vic_bt_type {
- 
- enum audio_format {
- 	AFMT_I2S = 0,
--	AFMT_SPDIF = 1,
-+	AFMT_SPDIF_INT = 1,
-+	AFMT_SPDIF_EXT = 2,
- 	AFMT_UNUSED,
- };
- 
-@@ -625,12 +626,13 @@ struct cdns_mhdp_device {
- 	struct drm_dp_mst_topology_mgr mst_mgr;
- 	struct delayed_work hotplug_work;
- 
-+	u32 lane_mapping;
- 	bool link_up;
- 	bool power_up;
- 	bool plugged;
- 
- 	union {
--		struct _dp_data {
-+		struct cdn_dp_data {
- 			struct drm_dp_link	link;
- 			struct drm_dp_aux	aux;
- 			struct cdns_mhdp_host	host;
-@@ -638,7 +640,6 @@ struct cdns_mhdp_device {
- 			struct cdns_mhdp_mst_cbs cbs;
- 			bool is_mst;
- 			bool can_mst;
--			u32 lane_mapping;
- 			u32 link_rate;
- 			u32 num_lanes;
- 		} dp;
-@@ -649,8 +650,11 @@ struct cdns_mhdp_device {
- 	};
- };
- 
-+u32 cdns_mhdp_bus_read(struct cdns_mhdp_device *mhdp, u32 offset);
-+void cdns_mhdp_bus_write(u32 val, struct cdns_mhdp_device *mhdp, u32 offset);
- void cdns_mhdp_clock_reset(struct cdns_mhdp_device *mhdp);
- void cdns_mhdp_set_fw_clk(struct cdns_mhdp_device *mhdp, unsigned long clk);
-+u32 cdns_mhdp_get_fw_clk(struct cdns_mhdp_device *mhdp);
- int cdns_mhdp_load_firmware(struct cdns_mhdp_device *mhdp, const u32 *i_mem,
- 			    u32 i_size, const u32 *d_mem, u32 d_size);
- int cdns_mhdp_set_firmware_active(struct cdns_mhdp_device *mhdp, bool enable);
-@@ -691,6 +695,8 @@ int cdns_mhdp_mailbox_validate_receive(s
- 					      u16 req_size);
- int cdns_mhdp_mailbox_read(struct cdns_mhdp_device *mhdp);
- 
-+void cdns_mhdp_infoframe_set(struct cdns_mhdp_device *mhdp,
-+					u8 entry_id, u8 packet_len, u8 *packet, u8 packet_type);
- int cdns_hdmi_get_edid_block(void *data, u8 *edid, u32 block, size_t length);
- int cdns_hdmi_scdc_read(struct cdns_mhdp_device *mhdp, u8 addr, u8 *data);
- int cdns_hdmi_scdc_write(struct cdns_mhdp_device *mhdp, u8 addr, u8 value);
diff --git a/target/linux/layerscape/patches-5.4/805-display-0007-drm-bridge-cadence-Add-mhdp-audio-driver.patch b/target/linux/layerscape/patches-5.4/805-display-0007-drm-bridge-cadence-Add-mhdp-audio-driver.patch
deleted file mode 100644
index f0a1414b03..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0007-drm-bridge-cadence-Add-mhdp-audio-driver.patch
+++ /dev/null
@@ -1,715 +0,0 @@
-From 3cd4b3cfc651c4d54897c72fbbaa9cd583ee6208 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Fri, 30 Aug 2019 17:51:43 +0800
-Subject: [PATCH] drm: bridge: cadence: Add mhdp audio driver
-
-Move mhdp audio driver to cadence folder.
-Add audio info-frame set function for hdmi tx audio.
-The driver suppoer both HDMI and DP audio.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/Kconfig            |   3 +
- drivers/gpu/drm/bridge/cadence/Makefile           |   3 +-
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c     |   4 +
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c   |   5 +-
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-audio.c  | 395 ++++++++++++++++++++++
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c | 183 ----------
- drivers/gpu/drm/imx/Kconfig                       |   1 +
- include/drm/bridge/cdns-mhdp-common.h             |   6 +
- 8 files changed, 414 insertions(+), 186 deletions(-)
- create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp-audio.c
-
---- a/drivers/gpu/drm/bridge/cadence/Kconfig
-+++ b/drivers/gpu/drm/bridge/cadence/Kconfig
-@@ -11,3 +11,6 @@ config DRM_CDNS_HDMI
- 
- config DRM_CDNS_DP
- 	tristate "Cadence DP DRM driver"
-+
-+config DRM_CDNS_AUDIO
-+	tristate "Cadence MHDP Audio driver"
---- a/drivers/gpu/drm/bridge/cadence/Makefile
-+++ b/drivers/gpu/drm/bridge/cadence/Makefile
-@@ -1,5 +1,4 @@
--#ccflags-y := -Iinclude/drm
--
- obj-$(CONFIG_DRM_CDNS_MHDP) += cdns-mhdp-common.o cdns-mhdp-hdmi.o
- obj-$(CONFIG_DRM_CDNS_HDMI) += cdns-hdmi-core.o
- obj-$(CONFIG_DRM_CDNS_DP) += cdns-dp-core.o
-+obj-$(CONFIG_DRM_CDNS_AUDIO) += cdns-mhdp-audio.o
---- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -526,6 +526,9 @@ __cdns_dp_probe(struct platform_device *
- 
- 	dev_set_drvdata(dev, &dp->mhdp);
- 	
-+	/* register audio driver */
-+	cdns_mhdp_register_audio_driver(dev);
-+
- 	dp_aux_init(&dp->mhdp, dev);
- 
- 	return dp;
-@@ -537,6 +540,7 @@ err_out:
- static void __cdns_dp_remove(struct cdns_mhdp_device *mhdp)
- {
- 	dp_aux_destroy(mhdp);
-+	cdns_mhdp_unregister_audio_driver(mhdp->dev);
- }
- 
- /* -----------------------------------------------------------------------------
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -9,7 +9,6 @@
-  * (at your option) any later version.
-  *
-  */
--
- #include <drm/bridge/cdns-mhdp-imx.h>
- #include <drm/drm_atomic_helper.h>
- #include <drm/drm_crtc_helper.h>
-@@ -513,6 +512,9 @@ __cdns_hdmi_probe(struct platform_device
- 
- 	dev_set_drvdata(dev, &hdmi->mhdp);
- 
-+	/* register audio driver */
-+	cdns_mhdp_register_audio_driver(dev);
-+
- 	return hdmi;
- 
- err_out:
-@@ -522,6 +524,7 @@ err_out:
- 
- static void __cdns_hdmi_remove(struct cdns_mhdp_device *mhdp)
- {
-+	cdns_mhdp_unregister_audio_driver(mhdp->dev);
- }
- 
- /* -----------------------------------------------------------------------------
---- /dev/null
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-audio.c
-@@ -0,0 +1,395 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
-+ * Author: Chris Zhong <zyw@rock-chips.com>
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+#include <linux/clk.h>
-+#include <linux/reset.h>
-+#include <drm/bridge/cdns-mhdp-common.h>
-+#include <sound/hdmi-codec.h>
-+#include <drm/bridge/cdns-mhdp-imx.h>
-+#include <drm/drm_of.h>
-+#include <drm/drmP.h>
-+
-+#define CDNS_DP_SPDIF_CLK		200000000
-+
-+static u32 TMDS_rate_table[7] = {
-+	25200, 27000, 54000, 74250, 148500, 297000, 594000,
-+};
-+
-+static u32 N_table_32k[7] = {
-+/* 25200/27000/54000/74250/148500/297000/594000 */
-+	4096, 4096, 4096, 4096, 4096, 3072, 3072,
-+};
-+
-+static u32 N_table_44k[7] = {
-+	6272, 6272, 6272, 6272, 6272, 4704, 9408,
-+};
-+
-+static u32 N_table_48k[7] = {
-+	6144, 6144, 6144, 6144, 6144, 5120, 6144,
-+};
-+
-+static int select_N_index(u32 pclk)
-+{
-+	int num = sizeof(TMDS_rate_table)/sizeof(int);
-+	int i = 0;
-+
-+	for (i = 0; i < num ; i++)
-+		if (pclk == TMDS_rate_table[i])
-+			break;
-+
-+	if (i == num) {
-+		DRM_WARN("pclkc %d is not supported!\n", pclk);
-+		return num-1;
-+	}
-+
-+	return i;
-+}
-+
-+static void hdmi_audio_avi_set(struct cdns_mhdp_device *mhdp,
-+						u32 channels)
-+{
-+	struct hdmi_audio_infoframe frame;
-+	u8 buf[32];
-+	int ret;
-+
-+	hdmi_audio_infoframe_init(&frame);
-+
-+	frame.channels = channels;
-+	frame.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
-+
-+	if (channels == 2)
-+		frame.channel_allocation = 0;
-+	else if (channels == 4)
-+		frame.channel_allocation = 0x3;
-+	else if (channels == 8)
-+		frame.channel_allocation = 0x13;
-+
-+	ret = hdmi_audio_infoframe_pack(&frame, buf + 1, sizeof(buf) - 1);
-+	if (ret < 0) {
-+		DRM_ERROR("failed to pack audio infoframe: %d\n", ret);
-+		return;
-+	}
-+
-+	buf[0] = 0;
-+
-+	cdns_mhdp_infoframe_set(mhdp, 1, sizeof(buf), buf, HDMI_INFOFRAME_TYPE_AUDIO);
-+}
-+
-+int cdns_mhdp_audio_stop(struct cdns_mhdp_device *mhdp,
-+			 struct audio_info *audio)
-+{
-+	int ret;
-+
-+	if (audio->connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
-+		ret = cdns_mhdp_reg_write(mhdp, AUDIO_PACK_CONTROL, 0);
-+		if (ret) {
-+			DRM_DEV_ERROR(mhdp->dev, "audio stop failed: %d\n", ret);
-+			return ret;
-+		}
-+	}
-+
-+	cdns_mhdp_bus_write(0, mhdp, SPDIF_CTRL_ADDR);
-+
-+	/* clearn the audio config and reset */
-+	cdns_mhdp_bus_write(0, mhdp, AUDIO_SRC_CNTL);
-+	cdns_mhdp_bus_write(0, mhdp, AUDIO_SRC_CNFG);
-+	cdns_mhdp_bus_write(AUDIO_SW_RST, mhdp, AUDIO_SRC_CNTL);
-+	cdns_mhdp_bus_write(0, mhdp, AUDIO_SRC_CNTL);
-+
-+	/* reset smpl2pckt component  */
-+	cdns_mhdp_bus_write(0, mhdp, SMPL2PKT_CNTL);
-+	cdns_mhdp_bus_write(AUDIO_SW_RST, mhdp, SMPL2PKT_CNTL);
-+	cdns_mhdp_bus_write(0, mhdp, SMPL2PKT_CNTL);
-+
-+	/* reset FIFO */
-+	cdns_mhdp_bus_write(AUDIO_SW_RST, mhdp, FIFO_CNTL);
-+	cdns_mhdp_bus_write(0, mhdp, FIFO_CNTL);
-+
-+	if (audio->format == AFMT_SPDIF_INT)
-+		clk_disable_unprepare(mhdp->spdif_clk);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_audio_stop);
-+
-+int cdns_mhdp_audio_mute(struct cdns_mhdp_device *mhdp, bool enable)
-+{
-+	struct audio_info *audio = &mhdp->audio_info;
-+	int ret = true;
-+
-+	if (audio->connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
-+		ret = cdns_mhdp_reg_write_bit(mhdp, DP_VB_ID, 4, 1, enable);
-+		if (ret)
-+			DRM_DEV_ERROR(mhdp->dev, "audio mute failed: %d\n", ret);
-+	}
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_audio_mute);
-+
-+static void cdns_mhdp_audio_config_i2s(struct cdns_mhdp_device *mhdp,
-+				       struct audio_info *audio)
-+{
-+	int sub_pckt_num = 1, i2s_port_en_val = 0xf, i;
-+	int idx = select_N_index(mhdp->mode.clock);
-+	u32 val, ncts;
-+
-+	if (audio->channels == 2) {
-+		if (mhdp->dp.link.num_lanes == 1)
-+			sub_pckt_num = 2;
-+		else
-+			sub_pckt_num = 4;
-+
-+		i2s_port_en_val = 1;
-+	} else if (audio->channels == 4) {
-+		i2s_port_en_val = 3;
-+	}
-+
-+	cdns_mhdp_bus_write(0x0, mhdp, SPDIF_CTRL_ADDR);
-+
-+	cdns_mhdp_bus_write(SYNC_WR_TO_CH_ZERO, mhdp, FIFO_CNTL);
-+
-+	val = MAX_NUM_CH(audio->channels);
-+	val |= NUM_OF_I2S_PORTS(audio->channels);
-+	val |= AUDIO_TYPE_LPCM;
-+	val |= CFG_SUB_PCKT_NUM(sub_pckt_num);
-+	cdns_mhdp_bus_write(val, mhdp, SMPL2PKT_CNFG);
-+
-+	if (audio->sample_width == 16)
-+		val = 0;
-+	else if (audio->sample_width == 24)
-+		val = 1 << 9;
-+	else
-+		val = 2 << 9;
-+
-+	val |= AUDIO_CH_NUM(audio->channels);
-+	val |= I2S_DEC_PORT_EN(i2s_port_en_val);
-+	val |= TRANS_SMPL_WIDTH_32;
-+	cdns_mhdp_bus_write(val, mhdp, AUDIO_SRC_CNFG);
-+
-+	for (i = 0; i < (audio->channels + 1) / 2; i++) {
-+		if (audio->sample_width == 16)
-+			val = (0x02 << 8) | (0x02 << 20);
-+		else if (audio->sample_width == 24)
-+			val = (0x0b << 8) | (0x0b << 20);
-+
-+		val |= ((2 * i) << 4) | ((2 * i + 1) << 16);
-+		cdns_mhdp_bus_write(val, mhdp, STTS_BIT_CH(i));
-+	}
-+
-+	switch (audio->sample_rate) {
-+	case 32000:
-+		val = SAMPLING_FREQ(3) |
-+		      ORIGINAL_SAMP_FREQ(0xc);
-+		ncts = N_table_32k[idx];
-+		break;
-+	case 44100:
-+		val = SAMPLING_FREQ(0) |
-+		      ORIGINAL_SAMP_FREQ(0xf);
-+		ncts = N_table_44k[idx];
-+		break;
-+	case 48000:
-+		val = SAMPLING_FREQ(2) |
-+		      ORIGINAL_SAMP_FREQ(0xd);
-+		ncts = N_table_48k[idx];
-+		break;
-+	case 88200:
-+		val = SAMPLING_FREQ(8) |
-+		      ORIGINAL_SAMP_FREQ(0x7);
-+		ncts = N_table_44k[idx] * 2;
-+		break;
-+	case 96000:
-+		val = SAMPLING_FREQ(0xa) |
-+		      ORIGINAL_SAMP_FREQ(5);
-+		ncts = N_table_48k[idx] * 2;
-+		break;
-+	case 176400:
-+		val = SAMPLING_FREQ(0xc) |
-+		      ORIGINAL_SAMP_FREQ(3);
-+		ncts = N_table_44k[idx] * 4;
-+		break;
-+	case 192000:
-+	default:
-+		val = SAMPLING_FREQ(0xe) |
-+		      ORIGINAL_SAMP_FREQ(1);
-+		ncts = N_table_48k[idx] * 4;
-+		break;
-+	}
-+	val |= 4;
-+	cdns_mhdp_bus_write(val, mhdp, COM_CH_STTS_BITS);
-+
-+	if (audio->connector_type == DRM_MODE_CONNECTOR_HDMIA)
-+		cdns_mhdp_reg_write(mhdp, CM_I2S_CTRL, ncts | 0x4000000);
-+
-+	cdns_mhdp_bus_write(SMPL2PKT_EN, mhdp, SMPL2PKT_CNTL);
-+	cdns_mhdp_bus_write(I2S_DEC_START, mhdp, AUDIO_SRC_CNTL);
-+}
-+
-+static void cdns_mhdp_audio_config_spdif(struct cdns_mhdp_device *mhdp)
-+{
-+	u32 val;
-+
-+	cdns_mhdp_bus_write(SYNC_WR_TO_CH_ZERO, mhdp, FIFO_CNTL);
-+
-+	val = MAX_NUM_CH(2) | AUDIO_TYPE_LPCM | CFG_SUB_PCKT_NUM(4);
-+	cdns_mhdp_bus_write(val, mhdp, SMPL2PKT_CNFG);
-+	cdns_mhdp_bus_write(SMPL2PKT_EN, mhdp, SMPL2PKT_CNTL);
-+
-+	val = SPDIF_ENABLE | SPDIF_AVG_SEL | SPDIF_JITTER_BYPASS;
-+	cdns_mhdp_bus_write(val, mhdp, SPDIF_CTRL_ADDR);
-+
-+	clk_prepare_enable(mhdp->spdif_clk);
-+	clk_set_rate(mhdp->spdif_clk, CDNS_DP_SPDIF_CLK);
-+}
-+
-+int cdns_mhdp_audio_config(struct cdns_mhdp_device *mhdp,
-+			   struct audio_info *audio)
-+{
-+	int ret;
-+
-+	/* reset the spdif clk before config */
-+	if (audio->format == AFMT_SPDIF_INT) {
-+		reset_control_assert(mhdp->spdif_rst);
-+		reset_control_deassert(mhdp->spdif_rst);
-+	}
-+
-+	if (audio->connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
-+		ret = cdns_mhdp_reg_write(mhdp, CM_LANE_CTRL, LANE_REF_CYC);
-+		if (ret)
-+			goto err_audio_config;
-+
-+		ret = cdns_mhdp_reg_write(mhdp, CM_CTRL, 0);
-+		if (ret)
-+			goto err_audio_config;
-+	} else {
-+		/* HDMI Mode */
-+		ret = cdns_mhdp_reg_write(mhdp, CM_CTRL, 8);
-+		if (ret)
-+			goto err_audio_config;
-+	}
-+
-+	if (audio->format == AFMT_I2S)
-+		cdns_mhdp_audio_config_i2s(mhdp, audio);
-+	else if (audio->format == AFMT_SPDIF_INT)
-+		cdns_mhdp_audio_config_spdif(mhdp);
-+
-+	if (audio->connector_type == DRM_MODE_CONNECTOR_DisplayPort)
-+		ret = cdns_mhdp_reg_write(mhdp, AUDIO_PACK_CONTROL, AUDIO_PACK_EN);
-+
-+	if (audio->connector_type == DRM_MODE_CONNECTOR_HDMIA)
-+		hdmi_audio_avi_set(mhdp, audio->channels);
-+
-+err_audio_config:
-+	if (ret)
-+		DRM_DEV_ERROR(mhdp->dev, "audio config failed: %d\n", ret);
-+	return ret;
-+}
-+EXPORT_SYMBOL(cdns_mhdp_audio_config);
-+
-+static int audio_hw_params(struct device *dev,  void *data,
-+				  struct hdmi_codec_daifmt *daifmt,
-+				  struct hdmi_codec_params *params)
-+{
-+	struct cdns_mhdp_device *mhdp = dev_get_drvdata(dev);
-+	struct audio_info audio = {
-+		.sample_width = params->sample_width,
-+		.sample_rate = params->sample_rate,
-+		.channels = params->channels,
-+		.connector_type = mhdp->connector.base.connector_type,
-+	};
-+	int ret;
-+
-+	switch (daifmt->fmt) {
-+	case HDMI_I2S:
-+		audio.format = AFMT_I2S;
-+		break;
-+	case HDMI_SPDIF:
-+		audio.format = AFMT_SPDIF_EXT;
-+		break;
-+	default:
-+		DRM_DEV_ERROR(dev, "Invalid format %d\n", daifmt->fmt);
-+		ret = -EINVAL;
-+		goto out;
-+	}
-+
-+	ret = cdns_mhdp_audio_config(mhdp, &audio);
-+	if (!ret)
-+		mhdp->audio_info = audio;
-+
-+out:
-+	return ret;
-+}
-+
-+static void audio_shutdown(struct device *dev, void *data)
-+{
-+	struct cdns_mhdp_device *mhdp = dev_get_drvdata(dev);
-+	int ret;
-+
-+	ret = cdns_mhdp_audio_stop(mhdp, &mhdp->audio_info);
-+	if (!ret)
-+		mhdp->audio_info.format = AFMT_UNUSED;
-+}
-+
-+static int audio_digital_mute(struct device *dev, void *data,
-+				     bool enable)
-+{
-+	struct cdns_mhdp_device *mhdp = dev_get_drvdata(dev);
-+	int ret;
-+
-+	ret = cdns_mhdp_audio_mute(mhdp, enable);
-+
-+	return ret;
-+}
-+
-+static int audio_get_eld(struct device *dev, void *data,
-+				u8 *buf, size_t len)
-+{
-+	struct cdns_mhdp_device *mhdp = dev_get_drvdata(dev);
-+
-+	memcpy(buf, mhdp->connector.base.eld,
-+	       min(sizeof(mhdp->connector.base.eld), len));
-+
-+	return 0;
-+}
-+
-+static const struct hdmi_codec_ops audio_codec_ops = {
-+	.hw_params = audio_hw_params,
-+	.audio_shutdown = audio_shutdown,
-+	.digital_mute = audio_digital_mute,
-+	.get_eld = audio_get_eld,
-+};
-+
-+int cdns_mhdp_register_audio_driver(struct device *dev)
-+{
-+	struct cdns_mhdp_device *mhdp = dev_get_drvdata(dev);
-+	struct hdmi_codec_pdata codec_data = {
-+		.i2s = 1,
-+		.spdif = 1,
-+		.ops = &audio_codec_ops,
-+		.max_i2s_channels = 8,
-+	};
-+
-+	mhdp->audio_pdev = platform_device_register_data(
-+			      dev, HDMI_CODEC_DRV_NAME, 1,
-+			      &codec_data, sizeof(codec_data));
-+
-+	return PTR_ERR_OR_ZERO(mhdp->audio_pdev);
-+}
-+
-+void cdns_mhdp_unregister_audio_driver(struct device *dev)
-+{
-+	struct cdns_mhdp_device *mhdp = dev_get_drvdata(dev);
-+
-+	platform_device_unregister(mhdp->audio_pdev);
-+}
---- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
-@@ -937,189 +937,6 @@ err_config_video:
- }
- EXPORT_SYMBOL(cdns_mhdp_config_video);
- 
--int cdns_mhdp_audio_stop(struct cdns_mhdp_device *mhdp,
--			 struct audio_info *audio)
--{
--	int ret;
--
--	ret = cdns_mhdp_reg_write(mhdp, AUDIO_PACK_CONTROL, 0);
--	if (ret) {
--		DRM_DEV_ERROR(mhdp->dev, "audio stop failed: %d\n", ret);
--		return ret;
--	}
--
--	cdns_mhdp_bus_write(0, mhdp, SPDIF_CTRL_ADDR);
--
--	/* clearn the audio config and reset */
--	cdns_mhdp_bus_write(0, mhdp, AUDIO_SRC_CNTL);
--	cdns_mhdp_bus_write(0, mhdp, AUDIO_SRC_CNFG);
--	cdns_mhdp_bus_write(AUDIO_SW_RST, mhdp, AUDIO_SRC_CNTL);
--	cdns_mhdp_bus_write(0, mhdp, AUDIO_SRC_CNTL);
--
--	/* reset smpl2pckt component  */
--	cdns_mhdp_bus_write(0, mhdp, SMPL2PKT_CNTL);
--	cdns_mhdp_bus_write(AUDIO_SW_RST, mhdp, SMPL2PKT_CNTL);
--	cdns_mhdp_bus_write(0, mhdp, SMPL2PKT_CNTL);
--
--	/* reset FIFO */
--	cdns_mhdp_bus_write(AUDIO_SW_RST, mhdp, FIFO_CNTL);
--	cdns_mhdp_bus_write(0, mhdp, FIFO_CNTL);
--
--	if (audio->format == AFMT_SPDIF_INT)
--		clk_disable_unprepare(mhdp->spdif_clk);
--
--	return 0;
--}
--EXPORT_SYMBOL(cdns_mhdp_audio_stop);
--
--int cdns_mhdp_audio_mute(struct cdns_mhdp_device *mhdp, bool enable)
--{
--	int ret;
--
--	ret = cdns_mhdp_reg_write_bit(mhdp, DP_VB_ID, 4, 1, enable);
--	if (ret)
--		DRM_DEV_ERROR(mhdp->dev, "audio mute failed: %d\n", ret);
--
--	return ret;
--}
--EXPORT_SYMBOL(cdns_mhdp_audio_mute);
--
--static void cdns_mhdp_audio_config_i2s(struct cdns_mhdp_device *mhdp,
--				       struct audio_info *audio)
--{
--	int sub_pckt_num = 1, i2s_port_en_val = 0xf, i;
--	u32 val;
--
--	if (audio->channels == 2) {
--		if (mhdp->dp.link.num_lanes == 1)
--			sub_pckt_num = 2;
--		else
--			sub_pckt_num = 4;
--
--		i2s_port_en_val = 1;
--	} else if (audio->channels == 4) {
--		i2s_port_en_val = 3;
--	}
--
--	cdns_mhdp_bus_write(0x0, mhdp, SPDIF_CTRL_ADDR);
--
--	cdns_mhdp_bus_write(SYNC_WR_TO_CH_ZERO, mhdp, FIFO_CNTL);
--
--	val = MAX_NUM_CH(audio->channels);
--	val |= NUM_OF_I2S_PORTS(audio->channels);
--	val |= AUDIO_TYPE_LPCM;
--	val |= CFG_SUB_PCKT_NUM(sub_pckt_num);
--	cdns_mhdp_bus_write(val, mhdp, SMPL2PKT_CNFG);
--
--	if (audio->sample_width == 16)
--		val = 0;
--	else if (audio->sample_width == 24)
--		val = 1 << 9;
--	else
--		val = 2 << 9;
--
--	val |= AUDIO_CH_NUM(audio->channels);
--	val |= I2S_DEC_PORT_EN(i2s_port_en_val);
--	val |= TRANS_SMPL_WIDTH_32;
--	cdns_mhdp_bus_write(val, mhdp, AUDIO_SRC_CNFG);
--
--	for (i = 0; i < (audio->channels + 1) / 2; i++) {
--		if (audio->sample_width == 16)
--			val = (0x02 << 8) | (0x02 << 20);
--		else if (audio->sample_width == 24)
--			val = (0x0b << 8) | (0x0b << 20);
--
--		val |= ((2 * i) << 4) | ((2 * i + 1) << 16);
--		cdns_mhdp_bus_write(val, mhdp, STTS_BIT_CH(i));
--	}
--
--	switch (audio->sample_rate) {
--	case 32000:
--		val = SAMPLING_FREQ(3) |
--		      ORIGINAL_SAMP_FREQ(0xc);
--		break;
--	case 44100:
--		val = SAMPLING_FREQ(0) |
--		      ORIGINAL_SAMP_FREQ(0xf);
--		break;
--	case 48000:
--		val = SAMPLING_FREQ(2) |
--		      ORIGINAL_SAMP_FREQ(0xd);
--		break;
--	case 88200:
--		val = SAMPLING_FREQ(8) |
--		      ORIGINAL_SAMP_FREQ(0x7);
--		break;
--	case 96000:
--		val = SAMPLING_FREQ(0xa) |
--		      ORIGINAL_SAMP_FREQ(5);
--		break;
--	case 176400:
--		val = SAMPLING_FREQ(0xc) |
--		      ORIGINAL_SAMP_FREQ(3);
--		break;
--	case 192000:
--		val = SAMPLING_FREQ(0xe) |
--		      ORIGINAL_SAMP_FREQ(1);
--		break;
--	}
--	val |= 4;
--	cdns_mhdp_bus_write(val, mhdp, COM_CH_STTS_BITS);
--
--	cdns_mhdp_bus_write(SMPL2PKT_EN, mhdp, SMPL2PKT_CNTL);
--	cdns_mhdp_bus_write(I2S_DEC_START, mhdp, AUDIO_SRC_CNTL);
--}
--
--static void cdns_mhdp_audio_config_spdif(struct cdns_mhdp_device *mhdp)
--{
--	u32 val;
--
--	cdns_mhdp_bus_write(SYNC_WR_TO_CH_ZERO, mhdp, FIFO_CNTL);
--
--	val = MAX_NUM_CH(2) | AUDIO_TYPE_LPCM | CFG_SUB_PCKT_NUM(4);
--	cdns_mhdp_bus_write(val, mhdp, SMPL2PKT_CNFG);
--	cdns_mhdp_bus_write(SMPL2PKT_EN, mhdp, SMPL2PKT_CNTL);
--
--	val = SPDIF_ENABLE | SPDIF_AVG_SEL | SPDIF_JITTER_BYPASS;
--	cdns_mhdp_bus_write(val, mhdp, SPDIF_CTRL_ADDR);
--
--	clk_prepare_enable(mhdp->spdif_clk);
--	clk_set_rate(mhdp->spdif_clk, CDNS_DP_SPDIF_CLK);
--}
--
--int cdns_mhdp_audio_config(struct cdns_mhdp_device *mhdp,
--			   struct audio_info *audio)
--{
--	int ret;
--
--	/* reset the spdif clk before config */
--	if (audio->format == AFMT_SPDIF_INT) {
--		reset_control_assert(mhdp->spdif_rst);
--		reset_control_deassert(mhdp->spdif_rst);
--	}
--
--	ret = cdns_mhdp_reg_write(mhdp, CM_LANE_CTRL, LANE_REF_CYC);
--	if (ret)
--		goto err_audio_config;
--
--	ret = cdns_mhdp_reg_write(mhdp, CM_CTRL, 0);
--	if (ret)
--		goto err_audio_config;
--
--	if (audio->format == AFMT_I2S)
--		cdns_mhdp_audio_config_i2s(mhdp, audio);
--	else if (audio->format == AFMT_SPDIF_INT)
--		cdns_mhdp_audio_config_spdif(mhdp);
--
--	ret = cdns_mhdp_reg_write(mhdp, AUDIO_PACK_CONTROL, AUDIO_PACK_EN);
--
--err_audio_config:
--	if (ret)
--		DRM_DEV_ERROR(mhdp->dev, "audio config failed: %d\n", ret);
--	return ret;
--}
--EXPORT_SYMBOL(cdns_mhdp_audio_config);
--
- int cdns_mhdp_adjust_lt(struct cdns_mhdp_device *mhdp,
- 			u8 nlanes, u16 udelay, u8 *lanes_data, u8 *dpcd)
- {
---- a/drivers/gpu/drm/imx/Kconfig
-+++ b/drivers/gpu/drm/imx/Kconfig
-@@ -45,6 +45,7 @@ config DRM_IMX_CDNS_MHDP
- 	select DRM_CDNS_MHDP
- 	select DRM_CDNS_DP
- 	select DRM_CDNS_HDMI
-+	select DRM_CDNS_AUDIO
- 	depends on DRM_IMX
- 	help
- 	  Choose this if you want to use HDMI on i.MX8.
---- a/include/drm/bridge/cdns-mhdp-common.h
-+++ b/include/drm/bridge/cdns-mhdp-common.h
-@@ -548,6 +548,7 @@ struct audio_info {
- 	int sample_rate;
- 	int channels;
- 	int sample_width;
-+	int connector_type;
- };
- 
- enum vic_pxl_encoding_format {
-@@ -670,11 +671,16 @@ int cdns_mhdp_get_edid_block(void *mhdp,
- int cdns_mhdp_train_link(struct cdns_mhdp_device *mhdp);
- int cdns_mhdp_set_video_status(struct cdns_mhdp_device *mhdp, int active);
- int cdns_mhdp_config_video(struct cdns_mhdp_device *mhdp);
-+
-+/* Audio */
- int cdns_mhdp_audio_stop(struct cdns_mhdp_device *mhdp,
- 			 struct audio_info *audio);
- int cdns_mhdp_audio_mute(struct cdns_mhdp_device *mhdp, bool enable);
- int cdns_mhdp_audio_config(struct cdns_mhdp_device *mhdp,
- 			   struct audio_info *audio);
-+int cdns_mhdp_register_audio_driver(struct device *dev);
-+void cdns_mhdp_unregister_audio_driver(struct device *dev);
-+
- int cdns_mhdp_reg_read(struct cdns_mhdp_device *mhdp, u32 addr);
- int cdns_mhdp_reg_write(struct cdns_mhdp_device *mhdp, u32 addr, u32 val);
- int cdns_mhdp_reg_write_bit(struct cdns_mhdp_device *mhdp, u16 addr,
diff --git a/target/linux/layerscape/patches-5.4/805-display-0008-drm-bridge-cadence-Add-CEC-driver-for-cdns-mhdp-hdmi.patch b/target/linux/layerscape/patches-5.4/805-display-0008-drm-bridge-cadence-Add-CEC-driver-for-cdns-mhdp-hdmi.patch
deleted file mode 100644
index 742928e71a..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0008-drm-bridge-cadence-Add-CEC-driver-for-cdns-mhdp-hdmi.patch
+++ /dev/null
@@ -1,474 +0,0 @@
-From ed9e7a6b3346b186a7bd22d9b62072e55ff7b9c5 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Mon, 2 Sep 2019 14:57:05 +0800
-Subject: [PATCH] drm: bridge: cadence: Add CEC driver for cdns mhdp hdmi
-
-Add cec driver for cdns mhdp hdmi.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/Kconfig            |   3 +
- drivers/gpu/drm/bridge/cadence/Makefile           |   1 +
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c     |   0
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c   |   9 +
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-cec.c    | 347 ++++++++++++++++++++++
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c |   0
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-hdmi.c   |   0
- include/drm/bridge/cdns-mhdp-common.h             |  24 +-
- 8 files changed, 382 insertions(+), 2 deletions(-)
- mode change 100755 => 100644 drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
- mode change 100755 => 100644 drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
- create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp-cec.c
- mode change 100755 => 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
- mode change 100755 => 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp-hdmi.c
-
---- a/drivers/gpu/drm/bridge/cadence/Kconfig
-+++ b/drivers/gpu/drm/bridge/cadence/Kconfig
-@@ -14,3 +14,6 @@ config DRM_CDNS_DP
- 
- config DRM_CDNS_AUDIO
- 	tristate "Cadence MHDP Audio driver"
-+
-+config DRM_CDNS_HDMI_CEC
-+	tristate "Cadence MHDP HDMI CEC driver"
---- a/drivers/gpu/drm/bridge/cadence/Makefile
-+++ b/drivers/gpu/drm/bridge/cadence/Makefile
-@@ -2,3 +2,4 @@ obj-$(CONFIG_DRM_CDNS_MHDP) += cdns-mhdp
- obj-$(CONFIG_DRM_CDNS_HDMI) += cdns-hdmi-core.o
- obj-$(CONFIG_DRM_CDNS_DP) += cdns-dp-core.o
- obj-$(CONFIG_DRM_CDNS_AUDIO) += cdns-mhdp-audio.o
-+obj-$(CONFIG_DRM_CDNS_HDMI_CEC) += cdns-mhdp-cec.o
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -515,6 +515,11 @@ __cdns_hdmi_probe(struct platform_device
- 	/* register audio driver */
- 	cdns_mhdp_register_audio_driver(dev);
- 
-+	/* register cec driver */
-+#ifdef CONFIG_DRM_CDNS_HDMI_CEC
-+	cdns_mhdp_register_cec_driver(dev);
-+#endif
-+
- 	return hdmi;
- 
- err_out:
-@@ -524,6 +529,10 @@ err_out:
- 
- static void __cdns_hdmi_remove(struct cdns_mhdp_device *mhdp)
- {
-+	/* unregister cec driver */
-+#ifdef CONFIG_DRM_CDNS_HDMI_CEC
-+	cdns_mhdp_unregister_cec_driver(mhdp->dev);
-+#endif
- 	cdns_mhdp_unregister_audio_driver(mhdp->dev);
- }
- 
---- /dev/null
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-cec.c
-@@ -0,0 +1,347 @@
-+/*
-+ * Copyright 2019 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+#include <linux/module.h>
-+#include <linux/workqueue.h>
-+#include <linux/kthread.h>
-+#include <linux/freezer.h>
-+#include <drm/bridge/cdns-mhdp-common.h>
-+
-+#define CEC_NAME	"cdns-mhdp-cec"
-+
-+#define REG_ADDR_OFF 4
-+#define MAX_LA_IDX 4
-+#define MAX_LA_VAL 15
-+
-+/* regsiter define */
-+#define TX_MSG_HEADER 0x33800
-+#define TX_MSG_LENGTH 0x33840
-+#define TX_MSG_CMD 0x33844
-+#define RX_MSG_CMD 0x33850
-+#define RX_CLEAR_BUF 0x33854
-+#define LOGICAL_ADDRESS_LA0 0x33858
-+
-+#define CLK_DIV_MSB 0x3386c
-+#define CLK_DIV_LSB 0x33870
-+#define RX_MSG_DATA1 0x33900
-+#define RX_MSG_LENGTH 0x33940
-+#define RX_MSG_STATUS 0x33944
-+#define NUM_OF_MSG_RX_BUF 0x33948
-+#define TX_MSG_STATUS 0x3394c
-+#define DB_L_TIMER 0x33980
-+
-+/**
-+ * CEC Transceiver operation.
-+ */
-+enum {
-+	CEC_TX_STOP,
-+	CEC_TX_TRANSMIT,
-+	CEC_TX_ABORT,
-+	CEC_TX_ABORT_AND_TRANSMIT
-+};
-+
-+/**
-+ * CEC Transceiver status.
-+ */
-+enum {
-+	CEC_STS_IDLE,
-+	CEC_STS_BUSY,
-+	CEC_STS_SUCCESS,
-+	CEC_STS_ERROR
-+};
-+
-+/**
-+ * CEC Receiver operation.
-+ */
-+enum {
-+	CEC_RX_STOP,
-+	CEC_RX_READ,
-+	CEC_RX_DISABLE,
-+	CEC_RX_ABORT_AND_CLR_FIFO
-+};
-+/**
-+ * Maximum number of Messages in the RX Buffers.
-+ */
-+#define CEC_MAX_RX_MSGS 2
-+
-+static u32 mhdp_cec_read(struct cdns_mhdp_cec *cec, u32 offset)
-+{
-+	struct cdns_mhdp_device *mhdp =
-+			container_of(cec, struct cdns_mhdp_device, hdmi.cec);
-+	return cdns_mhdp_bus_read(mhdp, offset);
-+}
-+
-+static void mhdp_cec_write(struct cdns_mhdp_cec *cec, u32 offset, u32 val)
-+{
-+	struct cdns_mhdp_device *mhdp =
-+			container_of(cec, struct cdns_mhdp_device, hdmi.cec);
-+	cdns_mhdp_bus_write(val, mhdp, offset);
-+}
-+
-+static void mhdp_cec_clear_rx_buffer(struct cdns_mhdp_cec *cec)
-+{
-+	mhdp_cec_write(cec, RX_CLEAR_BUF, 1);
-+	mhdp_cec_write(cec, RX_CLEAR_BUF, 0);
-+}
-+
-+static void mhdp_cec_set_divider(struct cdns_mhdp_cec *cec)
-+{
-+	struct cdns_mhdp_device *mhdp =
-+			container_of(cec, struct cdns_mhdp_device, hdmi.cec);
-+	u32 clk_div;
-+
-+	/* Set clock divider */
-+	clk_div = cdns_mhdp_get_fw_clk(mhdp) * 10;
-+
-+	mhdp_cec_write(cec, CLK_DIV_MSB,
-+			  (clk_div >> 8) & 0xFF);
-+	mhdp_cec_write(cec, CLK_DIV_LSB, clk_div & 0xFF);
-+}
-+
-+static u32 mhdp_cec_read_message(struct cdns_mhdp_cec *cec)
-+{
-+	struct cec_msg *msg = &cec->msg;
-+	int len;
-+	int i;
-+
-+	mhdp_cec_write(cec, RX_MSG_CMD, CEC_RX_READ);
-+
-+	len = mhdp_cec_read(cec, RX_MSG_LENGTH);
-+	msg->len = len + 1;
-+	dev_dbg(cec->dev, "RX MSG len =%d\n", len);
-+
-+	/* Read RX MSG bytes */
-+	for (i = 0; i < msg->len; ++i) {
-+		msg->msg[i] = (u8) mhdp_cec_read(cec, RX_MSG_DATA1 + (i * REG_ADDR_OFF));
-+		dev_dbg(cec->dev, "RX MSG[%d]=0x%x\n", i, msg->msg[i]);
-+	}
-+
-+	mhdp_cec_write(cec, RX_MSG_CMD, CEC_RX_STOP);
-+
-+	return true;
-+}
-+
-+static u32 mhdp_cec_write_message(struct cdns_mhdp_cec *cec, struct cec_msg *msg)
-+{
-+	u8 i;
-+
-+	mhdp_cec_write(cec, TX_MSG_CMD, CEC_TX_STOP);
-+
-+	if (msg->len > CEC_MAX_MSG_SIZE) {
-+		dev_err(cec->dev, "Invalid MSG size!\n");
-+		return -EINVAL;
-+	}
-+
-+	for (i = 0; i < msg->len; ++i)
-+		printk("msg[%d]=0x%x\n",i, msg->msg[i]);
-+
-+	/* Write Message to register */
-+	for (i = 0; i < msg->len; ++i) {
-+		mhdp_cec_write(cec, TX_MSG_HEADER + (i * REG_ADDR_OFF),
-+			  msg->msg[i]);
-+	}
-+	/* Write Message Length (payload + opcode) */
-+	mhdp_cec_write(cec, TX_MSG_LENGTH, msg->len - 1);
-+
-+	mhdp_cec_write(cec, TX_MSG_CMD, CEC_TX_TRANSMIT);
-+
-+	return true;
-+}
-+
-+//static void cec_abort_tx_transfer(struct cdns_mhdp_cec *cec)
-+//{
-+//	cec_write(cec, TX_MSG_CMD, CEC_TX_ABORT);
-+//	cec_write(cec, TX_MSG_CMD, CEC_TX_STOP);
-+//}
-+
-+static int mhdp_cec_set_logical_addr(struct cdns_mhdp_cec *cec, u32 la)
-+{
-+	u8 i;
-+	u8 la_reg;
-+
-+	if (la >= MAX_LA_VAL) {
-+		dev_err(cec->dev, "Error logical Addr\n");
-+		return -EINVAL;
-+	}
-+
-+	for (i = 0; i < MAX_LA_IDX; ++i) {
-+		la_reg =
-+		    mhdp_cec_read(cec, LOGICAL_ADDRESS_LA0 + (i * REG_ADDR_OFF));
-+
-+		if (la_reg & 0x10)
-+			continue;
-+
-+		if ((la_reg & 0xF) == la) {
-+			dev_warn(cec->dev, "Warning. LA already in use.\n");
-+			return true;
-+		}
-+
-+		la = (la & 0xF) | (1 << 4);
-+
-+		mhdp_cec_write(cec, LOGICAL_ADDRESS_LA0 + (i * REG_ADDR_OFF), la);
-+		return true;
-+	}
-+
-+	dev_warn(cec->dev, "All LA in use\n");
-+
-+	return false;
-+}
-+
-+static int mhdp_cec_poll_worker(void *_cec)
-+{
-+	struct cdns_mhdp_cec *cec = (struct cdns_mhdp_cec *)_cec;
-+	int num_rx_msgs, i;
-+	int sts;
-+
-+	set_freezable();
-+
-+	for (;;) {
-+		if (kthread_freezable_should_stop(NULL))
-+			break;
-+
-+		/* Check TX State */
-+		sts = mhdp_cec_read(cec, TX_MSG_STATUS);
-+		switch (sts) {
-+		case CEC_STS_SUCCESS:
-+			cec_transmit_done(cec->adap, CEC_TX_STATUS_OK, 0, 0, 0,
-+					  0);
-+			mhdp_cec_write(cec, TX_MSG_CMD, CEC_TX_STOP);
-+			break;
-+		case CEC_STS_ERROR:
-+			mhdp_cec_write(cec, TX_MSG_CMD, CEC_TX_STOP);
-+			cec_transmit_done(cec->adap,
-+					  CEC_TX_STATUS_MAX_RETRIES |
-+					  CEC_TX_STATUS_NACK, 0, 1, 0, 0);
-+			break;
-+		case CEC_STS_BUSY:
-+		default:
-+			break;
-+		}
-+
-+		/* Check RX State */
-+		sts = mhdp_cec_read(cec, RX_MSG_STATUS);
-+		num_rx_msgs = mhdp_cec_read(cec, NUM_OF_MSG_RX_BUF);
-+		switch (sts) {
-+		case CEC_STS_SUCCESS:
-+			if (num_rx_msgs == 0xf)
-+				num_rx_msgs = CEC_MAX_RX_MSGS;
-+
-+			if (num_rx_msgs > CEC_MAX_RX_MSGS) {
-+				dev_err(cec->dev, "Error rx msg num %d\n",
-+					num_rx_msgs);
-+				mhdp_cec_clear_rx_buffer(cec);
-+				break;
-+			}
-+
-+			/* Rx FIFO Depth 2 RX MSG */
-+			for (i = 0; i < num_rx_msgs; i++) {
-+				mhdp_cec_read_message(cec);
-+				cec->msg.rx_status = CEC_RX_STATUS_OK;
-+				cec_received_msg(cec->adap, &cec->msg);
-+			}
-+			break;
-+		default:
-+			break;
-+		}
-+
-+		if (!kthread_should_stop())
-+			schedule_timeout_idle(20);
-+	}
-+
-+	return 0;
-+}
-+
-+static int mhdp_cec_adap_enable(struct cec_adapter *adap, bool enable)
-+{
-+	struct cdns_mhdp_cec *cec = adap->priv;
-+
-+	if (enable) {
-+		mhdp_cec_write(cec, DB_L_TIMER, 0x10);
-+		mhdp_cec_set_divider(cec);
-+	} else
-+		mhdp_cec_set_divider(cec);
-+
-+	return 0;
-+}
-+
-+static int mhdp_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
-+{
-+	struct cdns_mhdp_cec *cec = adap->priv;
-+
-+	return mhdp_cec_set_logical_addr(cec, addr);
-+}
-+
-+static int mhdp_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
-+				 u32 signal_free_time, struct cec_msg *msg)
-+{
-+	struct cdns_mhdp_cec *cec = adap->priv;
-+
-+	mhdp_cec_write_message(cec, msg);
-+
-+	return 0;
-+}
-+
-+static const struct cec_adap_ops cdns_mhdp_cec_adap_ops = {
-+	.adap_enable = mhdp_cec_adap_enable,
-+	.adap_log_addr = mhdp_cec_adap_log_addr,
-+	.adap_transmit = mhdp_cec_adap_transmit,
-+};
-+
-+int cdns_mhdp_register_cec_driver(struct device *dev)
-+{
-+	struct cdns_mhdp_device *mhdp = dev_get_drvdata(dev);
-+	struct cdns_mhdp_cec *cec = &mhdp->hdmi.cec;
-+	int ret;
-+
-+	cec->adap = cec_allocate_adapter(&cdns_mhdp_cec_adap_ops, cec,
-+					 CEC_NAME,
-+					 CEC_CAP_PHYS_ADDR | CEC_CAP_LOG_ADDRS |
-+					 CEC_CAP_TRANSMIT | CEC_CAP_PASSTHROUGH
-+					 | CEC_CAP_RC, 1);
-+	ret = PTR_ERR_OR_ZERO(cec->adap);
-+	if (ret)
-+		return ret;
-+	ret = cec_register_adapter(cec->adap, dev);
-+	if (ret) {
-+		cec_delete_adapter(cec->adap);
-+		return ret;
-+	}
-+
-+	cec->dev = dev;
-+
-+	cec->cec_worker = kthread_create(mhdp_cec_poll_worker, cec, "cdns-mhdp-cec");
-+	if (IS_ERR(cec->cec_worker))
-+		dev_err(cec->dev, "failed  create hdp cec thread\n");
-+
-+	wake_up_process(cec->cec_worker);
-+
-+	dev_dbg(dev, "CEC successfuly probed\n");
-+	return 0;
-+}
-+
-+int cdns_mhdp_unregister_cec_driver(struct device *dev)
-+{
-+	struct cdns_mhdp_device *mhdp = dev_get_drvdata(dev);
-+	struct cdns_mhdp_cec *cec = &mhdp->hdmi.cec;
-+
-+	if (cec->cec_worker) {
-+		kthread_stop(cec->cec_worker);
-+		cec->cec_worker = NULL;
-+	}
-+	cec_unregister_adapter(cec->adap);
-+	return 0;
-+}
-+
-+MODULE_AUTHOR("Sandor.Yu@NXP.com");
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("NXP CDNS MHDP CEC driver");
---- a/include/drm/bridge/cdns-mhdp-common.h
-+++ b/include/drm/bridge/cdns-mhdp-common.h
-@@ -21,7 +21,7 @@
- #include <drm/drm_connector.h>
- #include <drm/drm_dp_helper.h>
- #include <drm/drm_dp_mst_helper.h>
--
-+#include <media/cec.h>
- #include <linux/bitops.h>
- 
- #define ADDR_IMEM		0x10000
-@@ -605,6 +605,17 @@ struct cdns_mhdp_connector {
- 	struct cdns_mhdp_bridge *bridge;
- };
- 
-+#ifdef CONFIG_DRM_CDNS_HDMI_CEC
-+struct cdns_mhdp_cec {
-+       struct cec_adapter *adap;
-+       struct device *dev;
-+       struct mutex lock;
-+
-+       struct cec_msg msg;
-+       struct task_struct *cec_worker;
-+};
-+#endif
-+
- struct cdns_mhdp_device {
- 	void __iomem		*regs;
- 
-@@ -633,7 +644,7 @@ struct cdns_mhdp_device {
- 	bool plugged;
- 
- 	union {
--		struct cdn_dp_data {
-+		struct _dp_data {
- 			struct drm_dp_link	link;
- 			struct drm_dp_aux	aux;
- 			struct cdns_mhdp_host	host;
-@@ -645,6 +656,9 @@ struct cdns_mhdp_device {
- 			u32 num_lanes;
- 		} dp;
- 		struct _hdmi_data {
-+#ifdef CONFIG_DRM_CDNS_HDMI_CEC
-+			struct cdns_mhdp_cec cec;
-+#endif
- 			u32 char_rate;
- 			u32 hdmi_type;
- 		} hdmi;
-@@ -713,4 +727,10 @@ int cdns_hdmi_disable_gcp(struct cdns_mh
- int cdns_hdmi_enable_gcp(struct cdns_mhdp_device *mhdp);
- 
- bool cdns_mhdp_check_alive(struct cdns_mhdp_device *mhdp);
-+/* CEC */
-+#ifdef CONFIG_DRM_CDNS_HDMI_CEC
-+int cdns_mhdp_register_cec_driver(struct device *dev);
-+int cdns_mhdp_unregister_cec_driver(struct device *dev);
-+#endif
-+
- #endif /* CDNS_MHDP_COMMON_H_ */
diff --git a/target/linux/layerscape/patches-5.4/805-display-0009-drm-rockchip-Fix-build-failed-issue.patch b/target/linux/layerscape/patches-5.4/805-display-0009-drm-rockchip-Fix-build-failed-issue.patch
deleted file mode 100644
index 6f44ce2219..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0009-drm-rockchip-Fix-build-failed-issue.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 9ab73f9efe983f2f9b6887150a2e7a48d7a57ded Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Mon, 2 Sep 2019 15:58:34 +0800
-Subject: [PATCH] drm: rockchip: Fix build failed issue
-
-Macro variable AFMT_SPDIF have renamed to AFMT_SPDIF_INT in headfile.
-use the correct variable to fix build issue.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/rockchip/cdn-dp-core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
-+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
-@@ -798,7 +798,7 @@ static int cdn_dp_audio_hw_params(struct
- 		audio.format = AFMT_I2S;
- 		break;
- 	case HDMI_SPDIF:
--		audio.format = AFMT_SPDIF;
-+		audio.format = AFMT_SPDIF_INT;
- 		break;
- 	default:
- 		DRM_DEV_ERROR(dev, "Invalid format %d\n", daifmt->fmt);
diff --git a/target/linux/layerscape/patches-5.4/805-display-0010-drm-bridge-cadence-move-struct-imx_mhdp_device-to-dr.patch b/target/linux/layerscape/patches-5.4/805-display-0010-drm-bridge-cadence-move-struct-imx_mhdp_device-to-dr.patch
deleted file mode 100644
index 74e5a58364..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0010-drm-bridge-cadence-move-struct-imx_mhdp_device-to-dr.patch
+++ /dev/null
@@ -1,1096 +0,0 @@
-From fe1824851dd6f7d3ee6d5411edba4102dacea873 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Wed, 11 Sep 2019 17:16:47 +0800
-Subject: [PATCH] drm: bridge: cadence: move struct imx_mhdp_device to drm/imx
-
-move struct imx_mhdp_device to drm/imx folder.
-change the base address name from regs to regs_base.
-add mhdp bus access function.
-uniform variable name.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c     | 188 ++++++++++-----------
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c   | 190 ++++++++++------------
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-audio.c  |   1 -
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-cec.c    |   2 +-
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c |  43 ++---
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-hdmi.c   |   1 -
- include/drm/bridge/cdns-mhdp-common.h             |  67 +++++++-
- include/drm/bridge/cdns-mhdp-imx.h                | 121 --------------
- 8 files changed, 258 insertions(+), 355 deletions(-)
- delete mode 100644 include/drm/bridge/cdns-mhdp-imx.h
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -9,8 +9,7 @@
-  * (at your option) any later version.
-  *
-  */
--
--#include <drm/bridge/cdns-mhdp-imx.h>
-+#include <drm/bridge/cdns-mhdp-common.h>
- #include <drm/drm_atomic_helper.h>
- #include <drm/drm_crtc_helper.h>
- #include <drm/drm_edid.h>
-@@ -25,8 +24,6 @@
- #include <linux/mutex.h>
- #include <linux/of_device.h>
- 
--#define aux_to_hdp(x) container_of(x, struct imx_mhdp_device, aux)
--
- /*
-  * This function only implements native DPDC reads and writes
-  */
-@@ -111,24 +108,24 @@ static void dp_pixel_clk_reset(struct cd
- 	cdns_mhdp_reg_write(mhdp, SOURCE_HDTX_CAR, val);
- }
- 
--static void cdns_dp_mode_set(struct imx_mhdp_device *dp,
-+static void cdns_dp_mode_set(struct cdns_mhdp_device *mhdp,
- 			const struct drm_display_mode *mode)
- {
- 	struct drm_dp_link link;
--	struct cdns_mhdp_device *mhdp = &dp->mhdp;
- 	u32 lane_mapping = mhdp->lane_mapping;
- 	int ret;
- 	char linkid[6];
- 
- 	memcpy(&mhdp->mode, mode, sizeof(struct drm_display_mode));
- 
--	dp->dual_mode = video_is_dual_mode(mode);
-+	//Sandor TODO
-+//	mhdp->dual_mode = video_is_dual_mode(mode);
- 
- 	dp_pixel_clk_reset(mhdp);
- 
--	hdp_plat_call(dp, pclock_change);
-+	cdns_mhdp_plat_call(mhdp, pclk_rate);
- 
--	hdp_plat_call(dp, phy_init);
-+	cdns_mhdp_plat_call(mhdp, phy_set);
- 
- 	ret = drm_dp_downstream_id(&mhdp->dp.aux, linkid);
- 	if (ret < 0) {
-@@ -168,7 +165,7 @@ static void cdns_dp_mode_set(struct imx_
- 	/* initialize phy if lanes or link rate differnt */
- 	if (mhdp->dp.link.num_lanes != mhdp->dp.num_lanes ||
- 			mhdp->dp.link.rate != mhdp->dp.link_rate)
--		hdp_plat_call(dp, phy_init);
-+		cdns_mhdp_plat_call(mhdp, phy_set);
- 
- 	/* Video off */
- 	ret = cdns_mhdp_set_video_status(mhdp, CONTROL_VIDEO_IDLE);
-@@ -215,11 +212,11 @@ static void cdns_dp_mode_set(struct imx_
- static enum drm_connector_status
- cdns_dp_connector_detect(struct drm_connector *connector, bool force)
- {
--	struct imx_mhdp_device *dp = container_of(connector,
--					struct imx_mhdp_device, mhdp.connector.base);
-+	struct cdns_mhdp_device *mhdp = container_of(connector,
-+					struct cdns_mhdp_device, connector.base);
- 	u8 hpd = 0xf;
- 
--	hpd = cdns_mhdp_read_hpd(&dp->mhdp);
-+	hpd = cdns_mhdp_read_hpd(mhdp);
- 	if (hpd == 1)
- 		/* Cable Connected */
- 		return connector_status_connected;
-@@ -235,15 +232,15 @@ cdns_dp_connector_detect(struct drm_conn
- 
- static int cdns_dp_connector_get_modes(struct drm_connector *connector)
- {
--	struct imx_mhdp_device *dp = container_of(connector,
--						struct imx_mhdp_device, mhdp.connector.base);
-+	struct cdns_mhdp_device *mhdp = container_of(connector,
-+					struct cdns_mhdp_device, connector.base);
- 	int num_modes = 0;
- 	struct edid *edid;
- 
--	edid = drm_do_get_edid(&dp->mhdp.connector.base,
--				   cdns_mhdp_get_edid_block, &dp->mhdp);
-+	edid = drm_do_get_edid(&mhdp->connector.base,
-+				   cdns_mhdp_get_edid_block, mhdp);
- 	if (edid) {
--		dev_info(dp->mhdp.dev, "%x,%x,%x,%x,%x,%x,%x,%x\n",
-+		dev_info(mhdp->dev, "%x,%x,%x,%x,%x,%x,%x,%x\n",
- 			 edid->header[0], edid->header[1],
- 			 edid->header[2], edid->header[3],
- 			 edid->header[4], edid->header[5],
-@@ -273,9 +270,9 @@ static const struct drm_connector_helper
- 
- static int cdns_dp_bridge_attach(struct drm_bridge *bridge)
- {
--	struct imx_mhdp_device *dp = bridge->driver_private;
-+	struct cdns_mhdp_device *mhdp = bridge->driver_private;
- 	struct drm_encoder *encoder = bridge->encoder;
--	struct drm_connector *connector = &dp->mhdp.connector.base;
-+	struct drm_connector *connector = &mhdp->connector.base;
- 
- 	connector->interlace_allowed = 1;
- 	connector->polled = DRM_CONNECTOR_POLL_HPD;
-@@ -319,9 +316,9 @@ static void cdns_dp_bridge_mode_set(stru
- 				    const struct drm_display_mode *orig_mode,
- 				    const struct drm_display_mode *mode)
- {
--	struct imx_mhdp_device *dp = bridge->driver_private;
--	struct drm_display_info *display_info = &dp->mhdp.connector.base.display_info;
--	struct video_info *video = &dp->mhdp.video_info;
-+	struct cdns_mhdp_device *mhdp = bridge->driver_private;
-+	struct drm_display_info *display_info = &mhdp->connector.base.display_info;
-+	struct video_info *video = &mhdp->video_info;
- 
- 	switch (display_info->bpc) {
- 	case 10:
-@@ -341,11 +338,11 @@ static void cdns_dp_bridge_mode_set(stru
- 
- 	DRM_INFO("Mode: %dx%dp%d\n", mode->hdisplay, mode->vdisplay, mode->clock); 
- 
--	mutex_lock(&dp->lock);
-+	mutex_lock(&mhdp->lock);
- 
--	cdns_dp_mode_set(dp, mode);
-+	cdns_dp_mode_set(mhdp, mode);
- 
--	mutex_unlock(&dp->lock);
-+	mutex_unlock(&mhdp->lock);
- }
- 
- static void cdn_hdp_bridge_enable(struct drm_bridge *bridge)
-@@ -354,8 +351,7 @@ static void cdn_hdp_bridge_enable(struct
- 
- static void cdn_hdp_bridge_disable(struct drm_bridge *bridge)
- {	
--	struct imx_mhdp_device *dp = bridge->driver_private;
--	struct cdns_mhdp_device *mhdp = &dp->mhdp;
-+	struct cdns_mhdp_device *mhdp = bridge->driver_private;
- 
- 	cdns_mhdp_set_video_status(mhdp, CONTROL_VIDEO_IDLE);
- 	drm_dp_link_power_down(&mhdp->dp.aux, &mhdp->dp.link);
-@@ -371,29 +367,29 @@ static const struct drm_bridge_funcs cdn
- 
- static void hotplug_work_func(struct work_struct *work)
- {
--	struct imx_mhdp_device *dp = container_of(work,
--					   struct imx_mhdp_device, hotplug_work.work);
--	struct drm_connector *connector = &dp->mhdp.connector.base;
-+	struct cdns_mhdp_device *mhdp = container_of(work,
-+					   struct cdns_mhdp_device, hotplug_work.work);
-+	struct drm_connector *connector = &mhdp->connector.base;
- 
- 	drm_helper_hpd_irq_event(connector->dev);
- 
- 	if (connector->status == connector_status_connected) {
- 		DRM_INFO("HDMI/DP Cable Plug In\n");
--		enable_irq(dp->irq[IRQ_OUT]);
-+		enable_irq(mhdp->irq[IRQ_OUT]);
- 	} else if (connector->status == connector_status_disconnected) {
- 		/* Cable Disconnedted  */
- 		DRM_INFO("HDMI/DP Cable Plug Out\n");
--		enable_irq(dp->irq[IRQ_IN]);
-+		enable_irq(mhdp->irq[IRQ_IN]);
- 	}
- }
- 
- static irqreturn_t cdns_dp_irq_thread(int irq, void *data)
- {
--	struct imx_mhdp_device *dp = data;
-+	struct cdns_mhdp_device *mhdp = data;
- 
- 	disable_irq_nosync(irq);
- 
--	mod_delayed_work(system_wq, &dp->hotplug_work,
-+	mod_delayed_work(system_wq, &mhdp->hotplug_work,
- 			msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS));
- 
- 	return IRQ_HANDLED;
-@@ -430,111 +426,92 @@ static void cdns_dp_parse_dt(struct cdns
- 	mhdp->dp.link.rate= mhdp->dp.link_rate;
- }
- 
--static struct imx_mhdp_device *
--__cdns_dp_probe(struct platform_device *pdev,
--		const struct cdn_plat_data *plat_data)
-+static int __cdns_dp_probe(struct platform_device *pdev,
-+		struct cdns_mhdp_device *mhdp)
- {
- 	struct device *dev = &pdev->dev;
--	struct imx_mhdp_device *dp;
- 	struct resource *iores = NULL;
- 	int ret;
- 
--	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
--	if (!dp)
--		return ERR_PTR(-ENOMEM);
--
--	dp->plat_data = plat_data;
--	dp->mhdp.dev = dev;
--
--	mutex_init(&dp->lock);
--	mutex_init(&dp->audio_mutex);
--	spin_lock_init(&dp->audio_lock);
-+	mutex_init(&mhdp->lock);
- 
--	INIT_DELAYED_WORK(&dp->hotplug_work, hotplug_work_func);
-+	INIT_DELAYED_WORK(&mhdp->hotplug_work, hotplug_work_func);
- 
- 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	dp->mhdp.regs = devm_ioremap(dev, iores->start, resource_size(iores));
--	if (IS_ERR(dp->mhdp.regs)) {
--		ret = PTR_ERR(dp->mhdp.regs);
--		goto err_out;
--	}
-+	mhdp->regs_base = devm_ioremap(dev, iores->start, resource_size(iores));
-+	if (IS_ERR(mhdp->regs_base))
-+		return -ENOMEM;
- 
--#if 0
- 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 1);
--	dp->regs_ss = devm_ioremap(dev, iores->start, resource_size(iores));
--	if (IS_ERR(dp->regs_ss)) {
--		ret = PTR_ERR(dp->regs_ss);
--		goto err_out;
--	}
--#endif
-+	mhdp->regs_sec = devm_ioremap(dev, iores->start, resource_size(iores));
-+	if (IS_ERR(mhdp->regs_sec))
-+		return -ENOMEM;
- 
--	dp->irq[IRQ_IN] = platform_get_irq_byname(pdev, "plug_in");
--	if (dp->irq[IRQ_IN] < 0)
-+	mhdp->irq[IRQ_IN] = platform_get_irq_byname(pdev, "plug_in");
-+	if (mhdp->irq[IRQ_IN] < 0)
- 		dev_info(dev, "No plug_in irq number\n");
- 
--	dp->irq[IRQ_OUT] = platform_get_irq_byname(pdev, "plug_out");
--	if (dp->irq[IRQ_OUT] < 0)
-+	mhdp->irq[IRQ_OUT] = platform_get_irq_byname(pdev, "plug_out");
-+	if (mhdp->irq[IRQ_OUT] < 0)
- 		dev_info(dev, "No plug_out irq number\n");
- 
--	cdns_dp_parse_dt(&dp->mhdp);
-+	cdns_dp_parse_dt(mhdp);
- 
--	dp->dual_mode = false;
--	hdp_plat_call(dp, fw_init);
-+//	mhdp->dual_mode = false;
-+	cdns_mhdp_plat_call(mhdp, firmware_init);
- 
- 	/* DP FW alive check */
--	ret = cdns_mhdp_check_alive(&dp->mhdp);
-+	ret = cdns_mhdp_check_alive(mhdp);
- 	if (ret == false) {
- 		DRM_ERROR("NO dp FW running\n");
--		return ERR_PTR(-ENXIO);
-+		return -ENXIO;
- 	}
- 
- 	/* DP PHY init before AUX init */
--	hdp_plat_call(dp, phy_init);
-+	cdns_mhdp_plat_call(mhdp, phy_set);
- 
- 	/* Enable Hotplug Detect IRQ thread */
--	irq_set_status_flags(dp->irq[IRQ_IN], IRQ_NOAUTOEN);
--	ret = devm_request_threaded_irq(dev, dp->irq[IRQ_IN],
-+	irq_set_status_flags(mhdp->irq[IRQ_IN], IRQ_NOAUTOEN);
-+	ret = devm_request_threaded_irq(dev, mhdp->irq[IRQ_IN],
- 					NULL, cdns_dp_irq_thread,
- 					IRQF_ONESHOT, dev_name(dev),
--					dp);
-+					mhdp);
- 	if (ret) {
- 		dev_err(dev, "can't claim irq %d\n",
--						dp->irq[IRQ_IN]);
--		goto err_out;
-+						mhdp->irq[IRQ_IN]);
-+		return -EINVAL;
- 	}
- 	
--	irq_set_status_flags(dp->irq[IRQ_OUT], IRQ_NOAUTOEN);
--	ret = devm_request_threaded_irq(dev, dp->irq[IRQ_OUT],
-+	irq_set_status_flags(mhdp->irq[IRQ_OUT], IRQ_NOAUTOEN);
-+	ret = devm_request_threaded_irq(dev, mhdp->irq[IRQ_OUT],
- 					NULL, cdns_dp_irq_thread,
- 					IRQF_ONESHOT, dev_name(dev),
--					dp);
-+					mhdp);
- 	if (ret) {
- 		dev_err(dev, "can't claim irq %d\n",
--						dp->irq[IRQ_OUT]);
--		goto err_out;
-+						mhdp->irq[IRQ_OUT]);
-+		return -EINVAL;
- 	}
--	if (cdns_mhdp_read_hpd(&dp->mhdp))
--		enable_irq(dp->irq[IRQ_OUT]);
-+
-+	if (cdns_mhdp_read_hpd(mhdp))
-+		enable_irq(mhdp->irq[IRQ_OUT]);
- 	else
--		enable_irq(dp->irq[IRQ_IN]);
-+		enable_irq(mhdp->irq[IRQ_IN]);
- 
--	dp->mhdp.bridge.base.driver_private = dp;
--	dp->mhdp.bridge.base.funcs = &cdns_dp_bridge_funcs;
-+	mhdp->bridge.base.driver_private = mhdp;
-+	mhdp->bridge.base.funcs = &cdns_dp_bridge_funcs;
- #ifdef CONFIG_OF
--	dp->mhdp.bridge.base.of_node = dev->of_node;
-+	mhdp->bridge.base.of_node = dev->of_node;
- #endif
- 
--	dev_set_drvdata(dev, &dp->mhdp);
-+	dev_set_drvdata(dev, mhdp);
- 	
- 	/* register audio driver */
- 	cdns_mhdp_register_audio_driver(dev);
- 
--	dp_aux_init(&dp->mhdp, dev);
--
--	return dp;
-+	dp_aux_init(mhdp, dev);
- 
--err_out:
--	return ERR_PTR(ret);
-+	return 0;
- }
- 
- static void __cdns_dp_remove(struct cdns_mhdp_device *mhdp)
-@@ -547,15 +524,15 @@ static void __cdns_dp_remove(struct cdns
-  * Probe/remove API, used from platforms based on the DRM bridge API.
-  */
- int cdns_dp_probe(struct platform_device *pdev,
--		  const struct cdn_plat_data *plat_data)
-+		  struct cdns_mhdp_device *mhdp)
- {
--	struct imx_mhdp_device *dp;
-+	int ret;
- 
--	dp = __cdns_dp_probe(pdev, plat_data);
--	if (IS_ERR(dp))
--		return PTR_ERR(dp);
-+	ret = __cdns_dp_probe(pdev, mhdp);
-+	if (ret)
-+		return ret;
- 
--	drm_bridge_add(&dp->mhdp.bridge.base);
-+	drm_bridge_add(&mhdp->bridge.base);
- 
- 	return 0;
- }
-@@ -575,16 +552,15 @@ EXPORT_SYMBOL_GPL(cdns_dp_remove);
-  * Bind/unbind API, used from platforms based on the component framework.
-  */
- int cdns_dp_bind(struct platform_device *pdev, struct drm_encoder *encoder,
--		 const struct cdn_plat_data *plat_data)
-+		struct cdns_mhdp_device *mhdp)
- {
--	struct imx_mhdp_device *dp;
- 	int ret;
- 
--	dp = __cdns_dp_probe(pdev, plat_data);
--	if (IS_ERR(dp))
--		return PTR_ERR(dp);
-+	ret = __cdns_dp_probe(pdev, mhdp);
-+	if (ret < 0)
-+		return ret;
- 
--	ret = drm_bridge_attach(encoder, &dp->mhdp.bridge.base, NULL);
-+	ret = drm_bridge_attach(encoder, &mhdp->bridge.base, NULL);
- 	if (ret) {
- 		cdns_dp_remove(pdev);
- 		DRM_ERROR("Failed to initialize bridge with drm\n");
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -9,7 +9,7 @@
-  * (at your option) any later version.
-  *
-  */
--#include <drm/bridge/cdns-mhdp-imx.h>
-+#include <drm/bridge/cdns-mhdp-common.h>
- #include <drm/drm_atomic_helper.h>
- #include <drm/drm_crtc_helper.h>
- #include <drm/drm_edid.h>
-@@ -60,8 +60,6 @@ static int hdmi_sink_config(struct cdns_
- static void hdmi_lanes_config(struct cdns_mhdp_device *mhdp)
- {
- 	/* Line swaping */
--	/* For imx8qm lane_mapping = 0x93
--	 * For imx8mq lane_mapping = 0xe4*/
- 	cdns_mhdp_reg_write(mhdp, LANES_CONFIG, 0x00400000 | mhdp->lane_mapping);
- }
- 
-@@ -216,12 +214,12 @@ void cdns_hdmi_mode_set(struct cdns_mhdp
- static enum drm_connector_status
- cdns_hdmi_connector_detect(struct drm_connector *connector, bool force)
- {
--	struct imx_mhdp_device *hdmi =
--				container_of(connector, struct imx_mhdp_device, mhdp.connector.base);
-+	struct cdns_mhdp_device *mhdp =
-+				container_of(connector, struct cdns_mhdp_device, connector.base);
- 
- 	u8 hpd = 0xf;
- 
--	hpd = cdns_mhdp_read_hpd(&hdmi->mhdp);
-+	hpd = cdns_mhdp_read_hpd(mhdp);
- 
- 	if (hpd == 1)
- 		/* Cable Connected */
-@@ -238,15 +236,15 @@ cdns_hdmi_connector_detect(struct drm_co
- 
- static int cdns_hdmi_connector_get_modes(struct drm_connector *connector)
- {
--	struct imx_mhdp_device *hdmi = container_of(connector, struct imx_mhdp_device,
--					     mhdp.connector.base);
-+	struct cdns_mhdp_device *mhdp =
-+				container_of(connector, struct cdns_mhdp_device, connector.base);
- 	int num_modes = 0;
- 	struct edid *edid;
- 
--	edid = drm_do_get_edid(&hdmi->mhdp.connector.base,
--				   cdns_hdmi_get_edid_block, &hdmi->mhdp);
-+	edid = drm_do_get_edid(&mhdp->connector.base,
-+				   cdns_hdmi_get_edid_block, mhdp);
- 	if (edid) {
--		dev_info(hdmi->mhdp.dev, "%x,%x,%x,%x,%x,%x,%x,%x\n",
-+		dev_info(mhdp->dev, "%x,%x,%x,%x,%x,%x,%x,%x\n",
- 			 edid->header[0], edid->header[1],
- 			 edid->header[2], edid->header[3],
- 			 edid->header[4], edid->header[5],
-@@ -276,9 +274,9 @@ static const struct drm_connector_helper
- 
- static int cdns_hdmi_bridge_attach(struct drm_bridge *bridge)
- {
--	struct imx_mhdp_device *hdmi = bridge->driver_private;
-+	struct cdns_mhdp_device *mhdp = bridge->driver_private;
- 	struct drm_encoder *encoder = bridge->encoder;
--	struct drm_connector *connector = &hdmi->mhdp.connector.base;
-+	struct drm_connector *connector = &mhdp->connector.base;
- 
- 	connector->interlace_allowed = 1;
- 	connector->polled = DRM_CONNECTOR_POLL_HPD;
-@@ -319,9 +317,9 @@ static void cdns_hdmi_bridge_mode_set(st
- 				    const struct drm_display_mode *orig_mode,
- 				    const struct drm_display_mode *mode)
- {
--	struct imx_mhdp_device *hdmi = bridge->driver_private;
--	struct drm_display_info *display_info = &hdmi->mhdp.connector.base.display_info;
--	struct video_info *video = &hdmi->mhdp.video_info;
-+	struct cdns_mhdp_device *mhdp = bridge->driver_private;
-+	struct drm_display_info *display_info = &mhdp->connector.base.display_info;
-+	struct video_info *video = &mhdp->video_info;
- 
- 	switch (display_info->bpc) {
- 	case 10:
-@@ -339,23 +337,24 @@ static void cdns_hdmi_bridge_mode_set(st
- 	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
- 	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
- 
--	mutex_lock(&hdmi->lock);
-+	mutex_lock(&mhdp->lock);
- 
- 	DRM_INFO("Mode: %dx%dp%d\n", mode->hdisplay, mode->vdisplay, mode->clock); 
- 
--	memcpy(&hdmi->mhdp.mode, mode, sizeof(struct drm_display_mode));
-+	memcpy(&mhdp->mode, mode, sizeof(struct drm_display_mode));
- 
--	hdmi->dual_mode = video_is_dual_mode(mode);
-+	//Sandor TODO
-+//	hdmi->dual_mode = video_is_dual_mode(mode);
- 
--	hdmi_lanes_config(&hdmi->mhdp);
-+	hdmi_lanes_config(mhdp);
- 
--	hdp_plat_call(hdmi, pclock_change);
-+	cdns_mhdp_plat_call(mhdp, pclk_rate);
- 
--	hdp_plat_call(hdmi, phy_init);
-+	cdns_mhdp_plat_call(mhdp, phy_set);
- 
--	cdns_hdmi_mode_set(&hdmi->mhdp);
-+	cdns_hdmi_mode_set(mhdp);
- 
--	mutex_unlock(&hdmi->lock);
-+	mutex_unlock(&mhdp->lock);
- }
- 
- static const struct drm_bridge_funcs cdns_hdmi_bridge_funcs = {
-@@ -366,30 +365,30 @@ static const struct drm_bridge_funcs cdn
- 
- static void hotplug_work_func(struct work_struct *work)
- {
--	struct imx_mhdp_device *hdmi = container_of(work,
--					   struct imx_mhdp_device, hotplug_work.work);
--	struct drm_connector *connector = &hdmi->mhdp.connector.base;
-+	struct cdns_mhdp_device *mhdp = container_of(work,
-+					   struct cdns_mhdp_device, hotplug_work.work);
-+	struct drm_connector *connector = &mhdp->connector.base;
- 
- 	drm_helper_hpd_irq_event(connector->dev);
- 
- 	if (connector->status == connector_status_connected) {
- 		/* Cable Connected */
- 		DRM_INFO("HDMI Cable Plug In\n");
--		enable_irq(hdmi->irq[IRQ_OUT]);
-+		enable_irq(mhdp->irq[IRQ_OUT]);
- 	} else if (connector->status == connector_status_disconnected) {
- 		/* Cable Disconnedted  */
- 		DRM_INFO("HDMI Cable Plug Out\n");
--		enable_irq(hdmi->irq[IRQ_IN]);
-+		enable_irq(mhdp->irq[IRQ_IN]);
- 	}
- }
- 
- static irqreturn_t cdns_hdmi_irq_thread(int irq, void *data)
- {
--	struct imx_mhdp_device *hdmi = data;
-+	struct cdns_mhdp_device *mhdp = data;
- 
- 	disable_irq_nosync(irq);
- 
--	mod_delayed_work(system_wq, &hdmi->hotplug_work,
-+	mod_delayed_work(system_wq, &mhdp->hotplug_work,
- 			msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS));
- 
- 	return IRQ_HANDLED;
-@@ -408,109 +407,99 @@ static void cdns_hdmi_parse_dt(struct cd
- 	dev_info(mhdp->dev, "lane-mapping 0x%02x\n", mhdp->lane_mapping);
- }
- 
--static struct imx_mhdp_device *
--__cdns_hdmi_probe(struct platform_device *pdev,
--			const struct cdn_plat_data *plat_data)
-+static int __cdns_hdmi_probe(struct platform_device *pdev,
-+		  struct cdns_mhdp_device *mhdp)
- {
- 	struct device *dev = &pdev->dev;
--	struct device_node *np = dev->of_node;
- 	struct platform_device_info pdevinfo;
--	struct imx_mhdp_device *hdmi;
- 	struct resource *iores = NULL;
- 	int ret;
- 
--	hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
--	if (!hdmi)
--		return ERR_PTR(-ENOMEM);
--
--	hdmi->plat_data = plat_data;
--	hdmi->mhdp.dev = dev;
--
--	mutex_init(&hdmi->lock);
--	mutex_init(&hdmi->audio_mutex);
--	spin_lock_init(&hdmi->audio_lock);
-+	mutex_init(&mhdp->lock);
- 
--	INIT_DELAYED_WORK(&hdmi->hotplug_work, hotplug_work_func);
-+	INIT_DELAYED_WORK(&mhdp->hotplug_work, hotplug_work_func);
- 
- 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	hdmi->mhdp.regs = devm_ioremap(dev, iores->start, resource_size(iores));
--	if (IS_ERR(hdmi->mhdp.regs)) {
--		ret = PTR_ERR(hdmi->mhdp.regs);
--		goto err_out;
-+	mhdp->regs_base = devm_ioremap(dev, iores->start, resource_size(iores));
-+	if (IS_ERR(mhdp->regs_base)) {
-+		dev_err(dev, "No regs_base memory\n");
-+		return -ENOMEM;
-+	}
-+
-+	/* sec register base */
-+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+	mhdp->regs_sec = devm_ioremap(dev, iores->start, resource_size(iores));
-+	if (IS_ERR(mhdp->regs_sec)) {
-+		dev_err(dev, "No regs_sec memory\n");
-+		return -ENOMEM;
- 	}
- 
--	/* csr register base */
--	hdmi->regmap_csr = syscon_regmap_lookup_by_phandle(np, "csr");
--	if (IS_ERR(hdmi->regmap_csr)) {
--		dev_info(dev, "No csr regmap\n");
--	}
--
--	hdmi->irq[IRQ_IN] = platform_get_irq_byname(pdev, "plug_in");
--	if (hdmi->irq[IRQ_IN] < 0) {
-+	mhdp->irq[IRQ_IN] = platform_get_irq_byname(pdev, "plug_in");
-+	if (mhdp->irq[IRQ_IN] < 0) {
- 		dev_info(dev, "No plug_in irq number\n");
--		return ERR_PTR(-EPROBE_DEFER);
-+		return -EPROBE_DEFER;
- 	}
- 
--	hdmi->irq[IRQ_OUT] = platform_get_irq_byname(pdev, "plug_out");
--	if (hdmi->irq[IRQ_OUT] < 0) {
-+	mhdp->irq[IRQ_OUT] = platform_get_irq_byname(pdev, "plug_out");
-+	if (mhdp->irq[IRQ_OUT] < 0) {
- 		dev_info(dev, "No plug_out irq number\n");
--		return ERR_PTR(-EPROBE_DEFER);
-+		return -EPROBE_DEFER;
- 	}
- 
- 	/* Initialize dual_mode to false */
--	hdmi->dual_mode = false;
-+//	hdmi->dual_mode = false;
- 
- 	/* Initialize FW */
--	hdp_plat_call(hdmi, fw_init);
-+	cdns_mhdp_plat_call(mhdp, firmware_init);
- 
- 	/* HDMI FW alive check */
--	ret = cdns_mhdp_check_alive(&hdmi->mhdp);
-+	ret = cdns_mhdp_check_alive(mhdp);
- 	if (ret == false) {
--		DRM_ERROR("NO HDMI FW running\n");
--		return ERR_PTR(-ENXIO);
-+		dev_err(dev, "NO HDMI FW running\n");
-+		return -ENXIO;
- 	}
- 
- 	/* Enable Hotplug Detect thread */
--	irq_set_status_flags(hdmi->irq[IRQ_IN], IRQ_NOAUTOEN);
--	ret = devm_request_threaded_irq(dev, hdmi->irq[IRQ_IN],
-+	irq_set_status_flags(mhdp->irq[IRQ_IN], IRQ_NOAUTOEN);
-+	ret = devm_request_threaded_irq(dev, mhdp->irq[IRQ_IN],
- 					NULL, cdns_hdmi_irq_thread,
- 					IRQF_ONESHOT, dev_name(dev),
--					hdmi);
--	if (ret) {
-+					mhdp);
-+	if (ret < 0) {
- 		dev_err(dev, "can't claim irq %d\n",
--						hdmi->irq[IRQ_IN]);
--		goto err_out;
-+						mhdp->irq[IRQ_IN]);
-+		return -EINVAL;
- 	}
- 	
--	irq_set_status_flags(hdmi->irq[IRQ_OUT], IRQ_NOAUTOEN);
--	ret = devm_request_threaded_irq(dev, hdmi->irq[IRQ_OUT],
-+	irq_set_status_flags(mhdp->irq[IRQ_OUT], IRQ_NOAUTOEN);
-+	ret = devm_request_threaded_irq(dev, mhdp->irq[IRQ_OUT],
- 					NULL, cdns_hdmi_irq_thread,
- 					IRQF_ONESHOT, dev_name(dev),
--					hdmi);
--	if (ret) {
-+					mhdp);
-+	if (ret < 0) {
- 		dev_err(dev, "can't claim irq %d\n",
--						hdmi->irq[IRQ_OUT]);
--		goto err_out;
-+						mhdp->irq[IRQ_OUT]);
-+		return -EINVAL;
- 	}
- 
--	cdns_hdmi_parse_dt(&hdmi->mhdp);
-+	cdns_hdmi_parse_dt(mhdp);
- 
--	if (cdns_mhdp_read_hpd(&hdmi->mhdp))
--		enable_irq(hdmi->irq[IRQ_OUT]);
-+	if (cdns_mhdp_read_hpd(mhdp))
-+		enable_irq(mhdp->irq[IRQ_OUT]);
- 	else
--		enable_irq(hdmi->irq[IRQ_IN]);
-+		enable_irq(mhdp->irq[IRQ_IN]);
- 
--	hdmi->mhdp.bridge.base.driver_private = hdmi;
--	hdmi->mhdp.bridge.base.funcs = &cdns_hdmi_bridge_funcs;
-+	mhdp->bridge.base.driver_private = mhdp;
-+	mhdp->bridge.base.funcs = &cdns_hdmi_bridge_funcs;
- #ifdef CONFIG_OF
--	hdmi->mhdp.bridge.base.of_node = dev->of_node;
-+	mhdp->bridge.base.of_node = dev->of_node;
- #endif
- 
- 	memset(&pdevinfo, 0, sizeof(pdevinfo));
- 	pdevinfo.parent = dev;
- 	pdevinfo.id = PLATFORM_DEVID_AUTO;
- 
--	dev_set_drvdata(dev, &hdmi->mhdp);
-+	dev_set_drvdata(dev, mhdp);
- 
- 	/* register audio driver */
- 	cdns_mhdp_register_audio_driver(dev);
-@@ -520,11 +509,7 @@ __cdns_hdmi_probe(struct platform_device
- 	cdns_mhdp_register_cec_driver(dev);
- #endif
- 
--	return hdmi;
--
--err_out:
--
--	return ERR_PTR(ret);
-+	return 0;
- }
- 
- static void __cdns_hdmi_remove(struct cdns_mhdp_device *mhdp)
-@@ -540,15 +525,15 @@ static void __cdns_hdmi_remove(struct cd
-  * Probe/remove API, used from platforms based on the DRM bridge API.
-  */
- int cdns_hdmi_probe(struct platform_device *pdev,
--		  const struct cdn_plat_data *plat_data)
-+		struct cdns_mhdp_device *mhdp)
- {
--	struct imx_mhdp_device *hdmi;
-+	int ret;
- 
--	hdmi = __cdns_hdmi_probe(pdev, plat_data);
--	if (IS_ERR(hdmi))
--		return PTR_ERR(hdmi);
-+	ret  = __cdns_hdmi_probe(pdev, mhdp);
-+	if (ret < 0)
-+		return ret;
- 
--	drm_bridge_add(&hdmi->mhdp.bridge.base);
-+	drm_bridge_add(&mhdp->bridge.base);
- 
- 	return 0;
- }
-@@ -568,16 +553,15 @@ EXPORT_SYMBOL_GPL(cdns_hdmi_remove);
-  * Bind/unbind API, used from platforms based on the component framework.
-  */
- int cdns_hdmi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
--		 const struct cdn_plat_data *plat_data)
-+			struct cdns_mhdp_device *mhdp)
- {
--	struct imx_mhdp_device *hdmi;
- 	int ret;
- 
--	hdmi = __cdns_hdmi_probe(pdev, plat_data);
--	if (IS_ERR(hdmi))
--		return PTR_ERR(hdmi);
-+	ret = __cdns_hdmi_probe(pdev, mhdp);
-+	if (ret)
-+		return ret;
- 
--	ret = drm_bridge_attach(encoder, &hdmi->mhdp.bridge.base, NULL);
-+	ret = drm_bridge_attach(encoder, &mhdp->bridge.base, NULL);
- 	if (ret) {
- 		cdns_hdmi_remove(pdev);
- 		DRM_ERROR("Failed to initialize bridge with drm\n");
---- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp-audio.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-audio.c
-@@ -16,7 +16,6 @@
- #include <linux/reset.h>
- #include <drm/bridge/cdns-mhdp-common.h>
- #include <sound/hdmi-codec.h>
--#include <drm/bridge/cdns-mhdp-imx.h>
- #include <drm/drm_of.h>
- #include <drm/drmP.h>
- 
---- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp-cec.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-cec.c
-@@ -344,4 +344,4 @@ int cdns_mhdp_unregister_cec_driver(stru
- 
- MODULE_AUTHOR("Sandor.Yu@NXP.com");
- MODULE_LICENSE("GPL");
--MODULE_DESCRIPTION("NXP CDNS MHDP CEC driver");
-+MODULE_DESCRIPTION("NXP CDNS MHDP HDMI CEC driver");
---- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
-@@ -23,7 +23,6 @@
- #include <asm/unaligned.h>
- 
- #include <drm/bridge/cdns-mhdp-common.h>
--#include <drm/bridge/cdns-mhdp-imx.h>
- #include <drm/drm_modes.h>
- #include <drm/drm_print.h>
- #include <linux/regmap.h>
-@@ -74,18 +73,20 @@ static inline void put_unaligned_be24(u3
- 
- u32 cdns_mhdp_bus_read(struct cdns_mhdp_device *mhdp, u32 offset)
- {
--	struct imx_mhdp_device *hdmi = container_of(mhdp, struct imx_mhdp_device, mhdp);
- 	u32 val;
- 
--	/* TODO */
--	if (offset >= 0x1000 && hdmi->regmap_csr) {
-+	if (mhdp->bus_type == BUS_TYPE_LOW4K_SAPB) {
-+		/* Remap address to low 4K SAPB bus */
-+		writel(offset >> 12, mhdp->regs_sec + 0xc);
-+		val = readl((offset & 0xfff) + mhdp->regs_base);
-+	} else if (mhdp->bus_type == BUS_TYPE_LOW4K_APB) {
- 		/* Remap address to low 4K memory */
--		regmap_write(hdmi->regmap_csr, hdmi->csr_ctrl0_reg, offset >> 12);
--		val = readl((offset & 0xfff) + mhdp->regs);
--		/* Restore address mapping */
--		regmap_write(hdmi->regmap_csr, hdmi->csr_ctrl0_reg, 0);
--	} else
--		val = readl(mhdp->regs + offset);
-+		writel(offset >> 12, mhdp->regs_sec + 8);
-+		val = readl((offset & 0xfff) + mhdp->regs_base);
-+	} else if (mhdp->bus_type == BUS_TYPE_NORMAL_SAPB)
-+		val = readl(mhdp->regs_sec + offset);
-+	else
-+		val = readl(mhdp->regs_base + offset);
- 
- 	return val;
- }
-@@ -93,18 +94,18 @@ EXPORT_SYMBOL(cdns_mhdp_bus_read);
- 
- void cdns_mhdp_bus_write(u32 val, struct cdns_mhdp_device *mhdp, u32 offset)
- {
--	struct imx_mhdp_device *hdmi = container_of(mhdp, struct imx_mhdp_device, mhdp);
--
--	/* TODO */
--	if (offset >= 0x1000 && hdmi->regmap_csr) {
-+	if (mhdp->bus_type == BUS_TYPE_LOW4K_SAPB) {
-+		/* Remap address to low 4K SAPB bus */
-+		writel(offset >> 12, mhdp->regs_sec + 0xc);
-+		writel(val, (offset & 0xfff) + mhdp->regs_base);
-+	} else if (mhdp->bus_type == BUS_TYPE_LOW4K_APB) {
- 		/* Remap address to low 4K memory */
--		regmap_write(hdmi->regmap_csr, hdmi->csr_ctrl0_reg, offset >> 12);
--		writel(val, (offset & 0xfff) + mhdp->regs);
--		/* Restore address mapping */
--		regmap_write(hdmi->regmap_csr, hdmi->csr_ctrl0_reg, 0);
--
--	} else
--		writel(val, mhdp->regs + offset);
-+		writel(offset >> 12, mhdp->regs_sec + 8);
-+		writel(val, (offset & 0xfff) + mhdp->regs_base);
-+	} else if (mhdp->bus_type == BUS_TYPE_NORMAL_SAPB)
-+		writel(val, mhdp->regs_sec + offset);
-+	else
-+		writel(val, mhdp->regs_base + offset);
- }
- EXPORT_SYMBOL(cdns_mhdp_bus_write);
- 
---- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp-hdmi.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-hdmi.c
-@@ -10,7 +10,6 @@
- #include <drm/drmP.h>
- #include <linux/io.h>
- #include <drm/bridge/cdns-mhdp-common.h>
--#include <drm/bridge/cdns-mhdp-imx.h>
- #include <linux/regmap.h>
- 
- void cdns_mhdp_infoframe_set(struct cdns_mhdp_device *mhdp,
---- a/include/drm/bridge/cdns-mhdp-common.h
-+++ b/include/drm/bridge/cdns-mhdp-common.h
-@@ -495,6 +495,22 @@
- 
- #define HOTPLUG_DEBOUNCE_MS		200
- 
-+#define IRQ_IN    0
-+#define IRQ_OUT   1
-+#define IRQ_NUM   2
-+
-+#define cdns_mhdp_plat_call(mhdp, operation)			\
-+	(!(mhdp) ? -ENODEV : (((mhdp)->plat_data && (mhdp)->plat_data->operation) ?	\
-+	 (mhdp)->plat_data->operation(mhdp) : ENOIOCTLCMD))
-+
-+/* bus access type */
-+enum {
-+	BUS_TYPE_NORMAL_APB = 0,
-+	BUS_TYPE_NORMAL_SAPB = 1,
-+	BUS_TYPE_LOW4K_APB = 2,
-+	BUS_TYPE_LOW4K_SAPB = 3,
-+};
-+
- enum voltage_swing_level {
- 	VOLTAGE_LEVEL_0,
- 	VOLTAGE_LEVEL_1,
-@@ -616,8 +632,33 @@ struct cdns_mhdp_cec {
- };
- #endif
- 
-+struct cdns_plat_data {
-+	/* Vendor PHY support */
-+	int (*bind)(struct platform_device *pdev,
-+			struct drm_encoder *encoder,
-+			struct cdns_mhdp_device *mhdp);
-+	void (*unbind)(struct device *dev);
-+
-+	void (*plat_init)(struct cdns_mhdp_device *mhdp);
-+	void (*plat_deinit)(struct cdns_mhdp_device *mhdp);
-+
-+	int (*phy_set)(struct cdns_mhdp_device *mhdp);
-+	int (*firmware_init)(struct cdns_mhdp_device *mhdp);
-+	void (*pclk_rate)(struct cdns_mhdp_device *mhdp);
-+
-+	int (*power_on)(struct cdns_mhdp_device *mhdp);
-+	int (*power_off)(struct cdns_mhdp_device *mhdp);
-+
-+	int bus_type;
-+	int video_format;
-+	char is_dp;
-+};
-+
- struct cdns_mhdp_device {
--	void __iomem		*regs;
-+	void __iomem		*regs_base;
-+	void __iomem		*regs_sec;
-+
-+	int bus_type;
- 
- 	struct device		*dev;
- 
-@@ -642,6 +683,9 @@ struct cdns_mhdp_device {
- 	bool link_up;
- 	bool power_up;
- 	bool plugged;
-+	struct mutex lock;
-+
-+	int irq[IRQ_NUM];
- 
- 	union {
- 		struct _dp_data {
-@@ -663,6 +707,8 @@ struct cdns_mhdp_device {
- 			u32 hdmi_type;
- 		} hdmi;
- 	};
-+	const struct cdns_plat_data *plat_data;
-+
- };
- 
- u32 cdns_mhdp_bus_read(struct cdns_mhdp_device *mhdp, u32 offset);
-@@ -727,6 +773,25 @@ int cdns_hdmi_disable_gcp(struct cdns_mh
- int cdns_hdmi_enable_gcp(struct cdns_mhdp_device *mhdp);
- 
- bool cdns_mhdp_check_alive(struct cdns_mhdp_device *mhdp);
-+
-+/* HDMI */
-+int cdns_hdmi_probe(struct platform_device *pdev,
-+		 struct cdns_mhdp_device *mhdp);
-+void cdns_hdmi_remove(struct platform_device *pdev);
-+void cdns_hdmi_unbind(struct device *dev);
-+int cdns_hdmi_bind(struct platform_device *pdev,
-+			struct drm_encoder *encoder, struct cdns_mhdp_device *mhdp);
-+void cdns_hdmi_set_sample_rate(struct cdns_mhdp_device *mhdp, unsigned int rate);
-+void cdns_hdmi_audio_enable(struct cdns_mhdp_device *mhdp);
-+void cdns_hdmi_audio_disable(struct cdns_mhdp_device *mhdp);
-+/* DP  */
-+int cdns_dp_probe(struct platform_device *pdev,
-+		 struct cdns_mhdp_device *mhdp);
-+void cdns_dp_remove(struct platform_device *pdev);
-+void cdns_dp_unbind(struct device *dev);
-+int cdns_dp_bind(struct platform_device *pdev,
-+			struct drm_encoder *encoder, struct cdns_mhdp_device *mhdp);
-+
- /* CEC */
- #ifdef CONFIG_DRM_CDNS_HDMI_CEC
- int cdns_mhdp_register_cec_driver(struct device *dev);
---- a/include/drm/bridge/cdns-mhdp-imx.h
-+++ /dev/null
-@@ -1,121 +0,0 @@
--/*
-- * Cadence High-Definition Multimedia Interface (HDMI) driver
-- *
-- * Copyright (C) 2019 NXP Semiconductor, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- */
--#ifndef CDNS_MHDP_IMX_H_
--#define CDNS_MHDP_IMX_H_
--
--#include <drm/bridge/cdns-mhdp-common.h>
--
--#define IRQ_IN    0
--#define IRQ_OUT   1
--#define IRQ_NUM   2
--
--#define hdp_plat_call(hdp, operation)			\
--	(!(hdp) ? -ENODEV : (((hdp)->plat_data && (hdp)->plat_data->operation) ?	\
--	 (hdp)->plat_data->operation(hdp) : ENOIOCTLCMD))
--
--#define HDP_DUAL_MODE_MIN_PCLK_RATE	300000	/* KHz */
--#define HDP_SINGLE_MODE_MAX_WIDTH	1920
--
--static inline bool video_is_dual_mode(const struct drm_display_mode *mode)
--{
--	return (mode->clock > HDP_DUAL_MODE_MIN_PCLK_RATE ||
--		mode->hdisplay > HDP_SINGLE_MODE_MAX_WIDTH) ? true : false;
--}
--
--struct imx_mhdp_device;
--
--struct imx_hdp_clks {
--	struct clk *av_pll;
--	struct clk *dig_pll;
--	struct clk *clk_ipg;
--	struct clk *clk_core;
--	struct clk *clk_pxl;
--	struct clk *clk_pxl_mux;
--	struct clk *clk_pxl_link;
--
--	struct clk *lpcg_hdp;
--	struct clk *lpcg_msi;
--	struct clk *lpcg_pxl;
--	struct clk *lpcg_vif;
--	struct clk *lpcg_lis;
--	struct clk *lpcg_apb;
--	struct clk *lpcg_apb_csr;
--	struct clk *lpcg_apb_ctrl;
--
--	struct clk *lpcg_i2s;
--	struct clk *clk_i2s_bypass;
--};
--
--struct cdn_plat_data {
--	/* Vendor PHY support */
--	int (*phy_init)(struct imx_mhdp_device *hdmi);
--	int (*bind)(struct platform_device *pdev,
--			struct drm_encoder *encoder,
--		 	const struct cdn_plat_data *plat_data);
--	void (*unbind)(struct device *dev);
--	int (*fw_init)(struct imx_mhdp_device *hdp);
--	void (*pclock_change)(struct imx_mhdp_device *hdp);
--	char is_dp;
--};
--
--struct imx_mhdp_device {
--	struct cdns_mhdp_device mhdp;
--
--	struct mutex lock;
--	struct mutex audio_mutex;
--	spinlock_t audio_lock;
--	bool connected;
--	bool active;
--	bool suspended;
--	struct imx_hdp_clks clks;
--
--	const struct cdn_plat_data *plat_data;
--
--	int irq[IRQ_NUM];
--	struct delayed_work hotplug_work;
--	//void __iomem *regmap_csr;
--	struct regmap *regmap_csr;
--	u32 csr_pxl_mux_reg;
--	u32 csr_ctrl0_reg;
--	u32 csr_ctrl0_sec;
--
--	struct audio_info audio_info;
--	bool sink_has_audio;
--	u32 dual_mode;
--
--	struct device		*pd_mhdp_dev;
--	struct device		*pd_pll0_dev;
--	struct device		*pd_pll1_dev;
--	struct device_link	*pd_mhdp_link;
--	struct device_link	*pd_pll0_link;
--	struct device_link	*pd_pll1_link;
--
--	u32 phy_init;
--};
--
--int cdns_hdmi_probe(struct platform_device *pdev,
--		  const struct cdn_plat_data *plat_data);
--void cdns_hdmi_remove(struct platform_device *pdev);
--void cdns_hdmi_unbind(struct device *dev);
--int cdns_hdmi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
--		 const struct cdn_plat_data *plat_data);
--void cdns_hdmi_set_sample_rate(struct imx_mhdp_device *hdmi, unsigned int rate);
--void cdns_hdmi_audio_enable(struct imx_mhdp_device *hdmi);
--void cdns_hdmi_audio_disable(struct imx_mhdp_device *hdmi);
--int cdns_dp_probe(struct platform_device *pdev,
--		  const struct cdn_plat_data *plat_data);
--void cdns_dp_remove(struct platform_device *pdev);
--void cdns_dp_unbind(struct device *dev);
--int cdns_dp_bind(struct platform_device *pdev, struct drm_encoder *encoder,
--		 const struct cdn_plat_data *plat_data);
--
--#endif /* CDNS_MHDP_IMX_H_ */
diff --git a/target/linux/layerscape/patches-5.4/805-display-0011-drm-imx-add-imx8mq-hdmi-support.patch b/target/linux/layerscape/patches-5.4/805-display-0011-drm-imx-add-imx8mq-hdmi-support.patch
deleted file mode 100644
index 8a6f5ddeee..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0011-drm-imx-add-imx8mq-hdmi-support.patch
+++ /dev/null
@@ -1,1169 +0,0 @@
-From 7095b3b3b28031708ab74a65c32e84e231bc9d27 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Wed, 11 Sep 2019 17:18:29 +0800
-Subject: [PATCH] drm: imx: add imx8mq hdmi support
-
-add struct imx_mhdp_device for imx specific.
-add imx8mq hdmi support.
-move imx8qm specific functions to plat_data
-uniform variable name.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/imx/Makefile            |   2 +-
- drivers/gpu/drm/imx/cdn-mhdp-dp-phy.c   |   8 +-
- drivers/gpu/drm/imx/cdn-mhdp-hdmi-phy.c |   7 +-
- drivers/gpu/drm/imx/cdn-mhdp-imx8mq.c   | 163 ------------
- drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c   | 437 ++++++++++----------------------
- drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c   | 202 +++++++++++++++
- drivers/gpu/drm/imx/cdn-mhdp-phy.h      |  12 +-
- drivers/gpu/drm/imx/cdns-mhdp-imx.h     |  80 ++++++
- 8 files changed, 421 insertions(+), 490 deletions(-)
- delete mode 100644 drivers/gpu/drm/imx/cdn-mhdp-imx8mq.c
- create mode 100644 drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
- create mode 100644 drivers/gpu/drm/imx/cdns-mhdp-imx.h
-
---- a/drivers/gpu/drm/imx/Makefile
-+++ b/drivers/gpu/drm/imx/Makefile
-@@ -9,4 +9,4 @@ obj-$(CONFIG_DRM_IMX_TVE) += imx-tve.o
- obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o
- 
- obj-$(CONFIG_DRM_IMX_HDMI) += dw_hdmi-imx.o
--obj-$(CONFIG_DRM_IMX_CDNS_MHDP) += cdn-mhdp-imx8qm.o cdn-mhdp-imx8mq.o cdn-mhdp-dp-phy.o cdn-mhdp-hdmi-phy.o
-+obj-$(CONFIG_DRM_IMX_CDNS_MHDP) += cdn-mhdp-imxdrv.o cdn-mhdp-dp-phy.o cdn-mhdp-hdmi-phy.o cdn-mhdp-imx8qm.o
---- a/drivers/gpu/drm/imx/cdn-mhdp-dp-phy.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-dp-phy.c
-@@ -12,7 +12,6 @@
- #include <linux/clk.h>
- #include <linux/kernel.h>
- #include <drm/drm_dp_helper.h>
--
- #include <drm/bridge/cdns-mhdp-common.h>
- #include "cdn-mhdp-phy.h"
- 
-@@ -477,9 +476,8 @@ static int dp_phy_power_up(struct cdns_m
- 	return 0;
- }
- 
--int cdns_dp_phy_init_imx8mq(struct imx_mhdp_device *hdp)
-+int cdns_dp_phy_set_imx8mq(struct cdns_mhdp_device *mhdp)
- {
--	struct cdns_mhdp_device *mhdp = &hdp->mhdp;
- 	int ret;
- 
- 	/* Disable phy clock if PHY in power up state */
-@@ -504,10 +502,8 @@ int cdns_dp_phy_init_imx8mq(struct imx_m
- 	return ret;
- }
- 
--
--int cdns_dp_phy_init_imx8qm(struct imx_mhdp_device *hdp)
-+int cdns_dp_phy_set_imx8qm(struct cdns_mhdp_device *mhdp)
- {
--	struct cdns_mhdp_device *mhdp = &hdp->mhdp;
- 	int ret;
- 
- 	/* Disable phy clock if PHY in power up state */
---- a/drivers/gpu/drm/imx/cdn-mhdp-hdmi-phy.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-hdmi-phy.c
-@@ -624,9 +624,8 @@ static int hdmi_phy_power_up(struct cdns
- 	return 0;
- }
- 
--int cdns_hdmi_phy_set_imx8mq(struct imx_mhdp_device *hdp)
-+int cdns_hdmi_phy_set_imx8mq(struct cdns_mhdp_device *mhdp)
- {
--	struct cdns_mhdp_device *mhdp = &hdp->mhdp;
- 	struct drm_display_mode *mode = &mhdp->mode;
- 	int ret;
- 
-@@ -653,9 +652,8 @@ int cdns_hdmi_phy_set_imx8mq(struct imx_
- 	return true;
- }
- 
--int cdns_hdmi_phy_set_imx8qm(struct imx_mhdp_device *hdp)
-+int cdns_hdmi_phy_set_imx8qm(struct cdns_mhdp_device *mhdp)
- {
--	struct cdns_mhdp_device *mhdp = &hdp->mhdp;
- 	struct drm_display_mode *mode = &mhdp->mode;
- 	int ret;
- 
-@@ -681,4 +679,3 @@ int cdns_hdmi_phy_set_imx8qm(struct imx_
- 
- 	return true;
- }
--
---- a/drivers/gpu/drm/imx/cdn-mhdp-imx8mq.c
-+++ /dev/null
-@@ -1,163 +0,0 @@
--/*
-- * Copyright (C) 2019 NXP Semiconductor, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--#include <linux/module.h>
--#include <linux/platform_device.h>
--#include <linux/component.h>
--#include <linux/mfd/syscon.h>
--#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
--#include <drm/drm_of.h>
--#include <drm/drmP.h>
--#include <drm/drm_crtc_helper.h>
--#include <drm/drm_edid.h>
--#include <drm/drm_encoder_slave.h>
--
--#include <drm/bridge/cdns-mhdp-imx.h>
--#include "cdn-mhdp-phy.h"
--#include "imx-drm.h"
--
--struct imx_hdmi {
--	struct device *dev;
--	struct drm_encoder encoder;
--};
--
--static void cdns_hdmi_imx_encoder_disable(struct drm_encoder *encoder)
--{
--}
--
--static void cdns_hdmi_imx_encoder_enable(struct drm_encoder *encoder)
--{
--}
--
--static int cdns_hdmi_imx_atomic_check(struct drm_encoder *encoder,
--				    struct drm_crtc_state *crtc_state,
--				    struct drm_connector_state *conn_state)
--{
--	return 0;
--}
--
--static const struct drm_encoder_helper_funcs cdns_hdmi_imx_encoder_helper_funcs = {
--	.enable     = cdns_hdmi_imx_encoder_enable,
--	.disable    = cdns_hdmi_imx_encoder_disable,
--	.atomic_check = cdns_hdmi_imx_atomic_check,
--};
--
--static const struct drm_encoder_funcs cdns_hdmi_imx_encoder_funcs = {
--	.destroy = drm_encoder_cleanup,
--};
--
--static struct cdn_plat_data imx8mq_hdmi_drv_data = {
--	.bind	= cdns_hdmi_bind,
--	.unbind	= cdns_hdmi_unbind,
--	.phy_init = cdns_hdmi_phy_set_imx8mq,
--};
--
--static struct cdn_plat_data imx8mq_dp_drv_data = {
--	.bind	= cdns_dp_bind,
--	.unbind	= cdns_dp_unbind,
--	.phy_init = cdns_dp_phy_init_imx8mq,
--};
--
--static const struct of_device_id cdns_hdmi_imx_dt_ids[] = {
--	{ .compatible = "cdn,imx8mq-hdmi",
--	  .data = &imx8mq_hdmi_drv_data
--	},
--	{ .compatible = "cdn,imx8mq-dp",
--	  .data = &imx8mq_dp_drv_data
--	},
--	{},
--};
--MODULE_DEVICE_TABLE(of, cdns_hdmi_imx_dt_ids);
--
--static int cdns_hdmi_imx_bind(struct device *dev, struct device *master,
--			    void *data)
--{
--	struct platform_device *pdev = to_platform_device(dev);
--	const struct cdn_plat_data *plat_data;
--	const struct of_device_id *match;
--	struct drm_device *drm = data;
--	struct drm_encoder *encoder;
--	struct imx_hdmi *hdmi;
--	int ret;
--
--	if (!pdev->dev.of_node)
--		return -ENODEV;
--
--	hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
--	if (!hdmi)
--		return -ENOMEM;
--
--	match = of_match_node(cdns_hdmi_imx_dt_ids, pdev->dev.of_node);
--	plat_data = match->data;
--	hdmi->dev = &pdev->dev;
--	encoder = &hdmi->encoder;
--
--	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
--	/*
--	 * If we failed to find the CRTC(s) which this encoder is
--	 * supposed to be connected to, it's because the CRTC has
--	 * not been registered yet.  Defer probing, and hope that
--	 * the required CRTC is added later.
--	 */
--	if (encoder->possible_crtcs == 0)
--		return -EPROBE_DEFER;
--
--	drm_encoder_helper_add(encoder, &cdns_hdmi_imx_encoder_helper_funcs);
--	drm_encoder_init(drm, encoder, &cdns_hdmi_imx_encoder_funcs,
--			 DRM_MODE_ENCODER_TMDS, NULL);
--
--	ret = plat_data->bind(pdev, encoder, plat_data);
--
--	/*
--	 * If cdns_hdmi_bind() fails we'll never call cdns_hdmi_unbind(),
--	 * which would have called the encoder cleanup.  Do it manually.
--	 */
--	if (ret)
--		drm_encoder_cleanup(encoder);
--
--	return ret;
--}
--
--static void cdns_hdmi_imx_unbind(struct device *dev, struct device *master,
--			       void *data)
--{
--	struct imx_mhdp_device *hdp = dev_get_drvdata(dev);
--
--	hdp->plat_data->unbind(dev);
--}
--
--static const struct component_ops cdns_hdmi_imx_ops = {
--	.bind	= cdns_hdmi_imx_bind,
--	.unbind	= cdns_hdmi_imx_unbind,
--};
--
--static int cdns_hdmi_imx_probe(struct platform_device *pdev)
--{
--	return component_add(&pdev->dev, &cdns_hdmi_imx_ops);
--}
--
--static int cdns_hdmi_imx_remove(struct platform_device *pdev)
--{
--	component_del(&pdev->dev, &cdns_hdmi_imx_ops);
--
--	return 0;
--}
--
--static struct platform_driver cdns_hdmi_imx_platform_driver = {
--	.probe  = cdns_hdmi_imx_probe,
--	.remove = cdns_hdmi_imx_remove,
--	.driver = {
--		.name = "cdn-hdp-imx8mq",
--		.of_match_table = cdns_hdmi_imx_dt_ids,
--	},
--};
--
--module_platform_driver(cdns_hdmi_imx_platform_driver);
--
--MODULE_AUTHOR("Sandor YU <sandor.yu@nxp.com>");
--MODULE_LICENSE("GPL");
--MODULE_ALIAS("platform:cdnhdmi-imx");
---- a/drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c
-@@ -1,54 +1,40 @@
- /*
-- * Copyright (C) 2019 NXP Semiconductor, Inc.
-+ * copyright (c) 2019 nxp semiconductor, inc.
-  *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-+ * this program is free software; you can redistribute it and/or modify
-+ * it under the terms of the gnu general public license version 2 as
-+ * published by the free software foundation.
-  */
- #include <dt-bindings/firmware/imx/rsrc.h>
--#include <linux/clk.h>
--#include <linux/module.h>
--#include <linux/platform_device.h>
--#include <linux/component.h>
--#include <drm/drm_of.h>
--#include <drm/drmP.h>
--#include <drm/drm_crtc_helper.h>
--#include <drm/drm_encoder_slave.h>
- #include <linux/firmware/imx/sci.h>
--#include <linux/regmap.h>
- #include <linux/pm_domain.h>
-+#include <linux/clk.h>
-+#include <drm/drmP.h>
- 
--#include <drm/bridge/cdns-mhdp-imx.h>
--#include "cdn-mhdp-phy.h"
--#include "imx-drm.h"
-+#include "cdns-mhdp-imx.h"
- 
- #define CSR_PIXEL_LINK_MUX_CTL		0x00
--#define PL_MUX_CTL_VCP_OFFSET		5
--#define PL_MUX_CTL_HCP_OFFSET		4
-+#define CSR_PIXEL_LINK_MUX_VCP_OFFSET		5
-+#define CSR_PIXEL_LINK_MUX_HCP_OFFSET		4
- 
- #define PLL_800MHZ (800000000)
- 
--struct imx_hdmi {
--	struct device *dev;
--	struct drm_encoder encoder;
--};
--
--static void imx8qm_pixel_link_mux(struct imx_mhdp_device *hdp)
-+static void imx8qm_pixel_link_mux(struct imx_mhdp_device *imx_mhdp)
- {
--	struct drm_display_mode *mode = &hdp->mhdp.mode;
-+	struct drm_display_mode *mode = &imx_mhdp->mhdp.mode;
- 	u32 val;
- 
- 	val = 0x4;	/* RGB */
--	if (hdp->dual_mode)
-+	if (imx_mhdp->dual_mode)
- 		val |= 0x2;	/* pixel link 0 and 1 are active */
- 	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
--		val |= 1 << PL_MUX_CTL_VCP_OFFSET;
-+		val |= 1 << CSR_PIXEL_LINK_MUX_VCP_OFFSET;
- 	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
--		val |= 1 << PL_MUX_CTL_HCP_OFFSET;
-+		val |= 1 << CSR_PIXEL_LINK_MUX_HCP_OFFSET;
- 	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
- 		val |= 0x2;
- 
--	regmap_write(hdp->regmap_csr, hdp->csr_pxl_mux_reg, val);
-+	writel(val, imx_mhdp->mhdp.regs_sec);
- }
- 
- static void imx8qm_pixel_link_valid(u32 dual_mode)
-@@ -120,10 +106,10 @@ static void imx8qm_clk_mux(u8 is_dp)
- 		imx_sc_misc_set_control(handle, IMX_SC_R_HDMI, IMX_SC_C_MODE, 0);
- }
- 
--int imx8qm_clocks_init(struct imx_mhdp_device *hdp)
-+int imx8qm_clocks_init(struct imx_mhdp_device *imx_mhdp)
- {
--	struct device *dev = hdp->mhdp.dev;
--	struct imx_hdp_clks *clks = &hdp->clks;
-+	struct device *dev = imx_mhdp->mhdp.dev;
-+	struct imx_hdp_clks *clks = &imx_mhdp->clks;
- 
- 	clks->dig_pll = devm_clk_get(dev, "dig_pll");
- 	if (IS_ERR(clks->dig_pll)) {
-@@ -229,10 +215,10 @@ int imx8qm_clocks_init(struct imx_mhdp_d
- 	return true;
- }
- 
--static int imx8qm_pixel_clk_enable(struct imx_mhdp_device *hdp)
-+static int imx8qm_pixel_clk_enable(struct imx_mhdp_device *imx_mhdp)
- {
--	struct imx_hdp_clks *clks = &hdp->clks;
--	struct device *dev = hdp->mhdp.dev;
-+	struct imx_hdp_clks *clks = &imx_mhdp->clks;
-+	struct device *dev = imx_mhdp->mhdp.dev;
- 	int ret;
- 
- 	ret = clk_prepare_enable(clks->av_pll);
-@@ -273,12 +259,11 @@ static int imx8qm_pixel_clk_enable(struc
- 		return ret;
- 	}
- 	return ret;
--
- }
- 
--static void imx8qm_pixel_clk_disable(struct imx_mhdp_device *hdp)
-+static void imx8qm_pixel_clk_disable(struct imx_mhdp_device *imx_mhdp)
- {
--	struct imx_hdp_clks *clks = &hdp->clks;
-+	struct imx_hdp_clks *clks = &imx_mhdp->clks;
- 
- 	clk_disable_unprepare(clks->lpcg_pxl);
- 	clk_disable_unprepare(clks->lpcg_hdp);
-@@ -289,14 +274,14 @@ static void imx8qm_pixel_clk_disable(str
- 	clk_disable_unprepare(clks->av_pll);
- }
- 
--static void imx8qm_pixel_clk_set_rate(struct imx_mhdp_device *hdp, u32 pclock)
-+static void imx8qm_pixel_clk_set_rate(struct imx_mhdp_device *imx_mhdp, u32 pclock)
- {
--	struct imx_hdp_clks *clks = &hdp->clks;
-+	struct imx_hdp_clks *clks = &imx_mhdp->clks;
- 
- 	/* pixel clock for HDMI */
- 	clk_set_rate(clks->av_pll, pclock);
- 
--	if (hdp->dual_mode == true) {
-+	if (imx_mhdp->dual_mode == true) {
- 		clk_set_rate(clks->clk_pxl, pclock/2);
- 		clk_set_rate(clks->clk_pxl_link, pclock/2);
- 	} else {
-@@ -306,24 +291,11 @@ static void imx8qm_pixel_clk_set_rate(st
- 	clk_set_rate(clks->clk_pxl_mux, pclock);
- }
- 
--static void imx8qm_pixel_clk_rate_change(struct imx_mhdp_device *hdp)
--{
--	/* set pixel clock before video mode setup */
--	imx8qm_pixel_clk_disable(hdp);
--
--	imx8qm_pixel_clk_set_rate(hdp, hdp->mhdp.mode.clock * 1000);
--
--	imx8qm_pixel_clk_enable(hdp);
--
--	/* Config pixel link mux */
--	imx8qm_pixel_link_mux(hdp);
--}
--
--static int imx8qm_ipg_clk_enable(struct imx_mhdp_device *hdp)
-+static int imx8qm_ipg_clk_enable(struct imx_mhdp_device *imx_mhdp)
- {
- 	int ret;
--	struct imx_hdp_clks *clks = &hdp->clks;
--	struct device *dev = hdp->mhdp.dev;
-+	struct imx_hdp_clks *clks = &imx_mhdp->clks;
-+	struct device *dev = imx_mhdp->mhdp.dev;
- 
- 	ret = clk_prepare_enable(clks->dig_pll);
- 	if (ret < 0) {
-@@ -381,25 +353,9 @@ static int imx8qm_ipg_clk_enable(struct
- 	return ret;
- }
- 
--static void imx8qm_ipg_clk_disable(struct imx_mhdp_device *hdp)
--{
--	struct imx_hdp_clks *clks = &hdp->clks;
--
--	clk_disable_unprepare(clks->clk_i2s_bypass);
--	clk_disable_unprepare(clks->lpcg_i2s);
--	clk_disable_unprepare(clks->lpcg_apb_ctrl);
--	clk_disable_unprepare(clks->lpcg_apb_csr);
--	clk_disable_unprepare(clks->lpcg_msi);
--	clk_disable_unprepare(clks->lpcg_lis);
--	clk_disable_unprepare(clks->lpcg_apb);
--	clk_disable_unprepare(clks->clk_core);
--	clk_disable_unprepare(clks->clk_ipg);
--	clk_disable_unprepare(clks->dig_pll);
--}
--
--static void imx8qm_ipg_clk_set_rate(struct imx_mhdp_device *hdp)
-+static void imx8qm_ipg_clk_set_rate(struct imx_mhdp_device *imx_mhdp)
- {
--	struct imx_hdp_clks *clks = &hdp->clks;
-+	struct imx_hdp_clks *clks = &imx_mhdp->clks;
- 
- 	/* ipg/core clock */
- 	clk_set_rate(clks->dig_pll,  PLL_800MHZ);
-@@ -407,308 +363,171 @@ static void imx8qm_ipg_clk_set_rate(stru
- 	clk_set_rate(clks->clk_ipg,  PLL_800MHZ/8);
- }
- 
--static void imx8qm_detach_pm_domains(struct imx_mhdp_device *hdp)
-+static void imx8qm_detach_pm_domains(struct imx_mhdp_device *imx_mhdp)
- {
--	if (hdp->pd_pll1_link && !IS_ERR(hdp->pd_pll1_link))
--		device_link_del(hdp->pd_pll1_link);
--	if (hdp->pd_pll1_dev && !IS_ERR(hdp->pd_pll1_dev))
--		dev_pm_domain_detach(hdp->pd_pll1_dev, true);
--
--	if (hdp->pd_pll0_link && !IS_ERR(hdp->pd_pll0_link))
--		device_link_del(hdp->pd_pll0_link);
--	if (hdp->pd_pll0_dev && !IS_ERR(hdp->pd_pll0_dev))
--		dev_pm_domain_detach(hdp->pd_pll0_dev, true);
--
--	if (hdp->pd_mhdp_link && !IS_ERR(hdp->pd_mhdp_link))
--		device_link_del(hdp->pd_mhdp_link);
--	if (hdp->pd_mhdp_dev && !IS_ERR(hdp->pd_mhdp_dev))
--		dev_pm_domain_detach(hdp->pd_mhdp_dev, true);
--
--	hdp->pd_mhdp_dev = NULL;
--	hdp->pd_mhdp_link = NULL;
--	hdp->pd_pll0_dev = NULL;
--	hdp->pd_pll0_link = NULL;
--	hdp->pd_pll1_dev = NULL;
--	hdp->pd_pll1_link = NULL;
-+	if (imx_mhdp->pd_pll1_link && !IS_ERR(imx_mhdp->pd_pll1_link))
-+		device_link_del(imx_mhdp->pd_pll1_link);
-+	if (imx_mhdp->pd_pll1_dev && !IS_ERR(imx_mhdp->pd_pll1_dev))
-+		dev_pm_domain_detach(imx_mhdp->pd_pll1_dev, true);
-+
-+	if (imx_mhdp->pd_pll0_link && !IS_ERR(imx_mhdp->pd_pll0_link))
-+		device_link_del(imx_mhdp->pd_pll0_link);
-+	if (imx_mhdp->pd_pll0_dev && !IS_ERR(imx_mhdp->pd_pll0_dev))
-+		dev_pm_domain_detach(imx_mhdp->pd_pll0_dev, true);
-+
-+	if (imx_mhdp->pd_mhdp_link && !IS_ERR(imx_mhdp->pd_mhdp_link))
-+		device_link_del(imx_mhdp->pd_mhdp_link);
-+	if (imx_mhdp->pd_mhdp_dev && !IS_ERR(imx_mhdp->pd_mhdp_dev))
-+		dev_pm_domain_detach(imx_mhdp->pd_mhdp_dev, true);
-+
-+	imx_mhdp->pd_mhdp_dev = NULL;
-+	imx_mhdp->pd_mhdp_link = NULL;
-+	imx_mhdp->pd_pll0_dev = NULL;
-+	imx_mhdp->pd_pll0_link = NULL;
-+	imx_mhdp->pd_pll1_dev = NULL;
-+	imx_mhdp->pd_pll1_link = NULL;
- }
- 
--static int imx8qm_attach_pm_domains(struct imx_mhdp_device *hdp)
-+static int imx8qm_attach_pm_domains(struct imx_mhdp_device *imx_mhdp)
- {
--	struct device *dev = hdp->mhdp.dev;
-+	struct device *dev = imx_mhdp->mhdp.dev;
- 	u32 flags = DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE;
- 	int ret = 0;
- 
--	hdp->pd_mhdp_dev = dev_pm_domain_attach_by_name(dev, "hdmi");
--	if (IS_ERR(hdp->pd_mhdp_dev)) {
--		ret = PTR_ERR(hdp->pd_mhdp_dev);
-+	imx_mhdp->pd_mhdp_dev = dev_pm_domain_attach_by_name(dev, "hdmi");
-+	if (IS_ERR(imx_mhdp->pd_mhdp_dev)) {
-+		ret = PTR_ERR(imx_mhdp->pd_mhdp_dev);
- 		dev_err(dev, "Failed to attach dc pd dev: %d\n", ret);
- 		goto fail;
- 	}
--	hdp->pd_mhdp_link = device_link_add(dev, hdp->pd_mhdp_dev, flags);
--	if (IS_ERR(hdp->pd_mhdp_link)) {
--		ret = PTR_ERR(hdp->pd_mhdp_link);
-+	imx_mhdp->pd_mhdp_link = device_link_add(dev, imx_mhdp->pd_mhdp_dev, flags);
-+	if (IS_ERR(imx_mhdp->pd_mhdp_link)) {
-+		ret = PTR_ERR(imx_mhdp->pd_mhdp_link);
- 		dev_err(dev, "Failed to add device link to dc pd dev: %d\n",
- 			ret);
- 		goto fail;
- 	}
- 
--	hdp->pd_pll0_dev = dev_pm_domain_attach_by_name(dev, "pll0");
--	if (IS_ERR(hdp->pd_pll0_dev)) {
--		ret = PTR_ERR(hdp->pd_pll0_dev);
-+	imx_mhdp->pd_pll0_dev = dev_pm_domain_attach_by_name(dev, "pll0");
-+	if (IS_ERR(imx_mhdp->pd_pll0_dev)) {
-+		ret = PTR_ERR(imx_mhdp->pd_pll0_dev);
- 		dev_err(dev, "Failed to attach pll0 pd dev: %d\n", ret);
- 		goto fail;
- 	}
--	hdp->pd_pll0_link = device_link_add(dev, hdp->pd_pll0_dev, flags);
--	if (IS_ERR(hdp->pd_pll0_link)) {
--		ret = PTR_ERR(hdp->pd_pll0_link);
-+	imx_mhdp->pd_pll0_link = device_link_add(dev, imx_mhdp->pd_pll0_dev, flags);
-+	if (IS_ERR(imx_mhdp->pd_pll0_link)) {
-+		ret = PTR_ERR(imx_mhdp->pd_pll0_link);
- 		dev_err(dev, "Failed to add device link to pll0 pd dev: %d\n",
- 			ret);
- 		goto fail;
- 	}
- 
--	hdp->pd_pll1_dev = dev_pm_domain_attach_by_name(dev, "pll1");
--	if (IS_ERR(hdp->pd_pll1_dev)) {
--		ret = PTR_ERR(hdp->pd_pll1_dev);
-+	imx_mhdp->pd_pll1_dev = dev_pm_domain_attach_by_name(dev, "pll1");
-+	if (IS_ERR(imx_mhdp->pd_pll1_dev)) {
-+		ret = PTR_ERR(imx_mhdp->pd_pll1_dev);
- 		dev_err(dev, "Failed to attach pll0 pd dev: %d\n", ret);
- 		goto fail;
- 	}
--	hdp->pd_pll1_link = device_link_add(dev, hdp->pd_pll1_dev, flags);
--	if (IS_ERR(hdp->pd_pll1_link)) {
--		ret = PTR_ERR(hdp->pd_pll1_link);
-+	imx_mhdp->pd_pll1_link = device_link_add(dev, imx_mhdp->pd_pll1_dev, flags);
-+	if (IS_ERR(imx_mhdp->pd_pll1_link)) {
-+		ret = PTR_ERR(imx_mhdp->pd_pll1_link);
- 		dev_err(dev, "Failed to add device link to pll1 pd dev: %d\n",
- 			ret);
- 		goto fail;
- 	}
- fail:
--	imx8qm_detach_pm_domains(hdp);
-+	imx8qm_detach_pm_domains(imx_mhdp);
- 	return ret;
- }
- 
--static int imx8qm_firmware_init(struct imx_mhdp_device *hdp)
-+static void imx8qm_mhdp_power_on(struct cdns_mhdp_device *mhdp)
- {
--	u32 rate;
--	int ret;
--
-+	struct imx_mhdp_device *imx_mhdp =
-+				container_of(mhdp, struct imx_mhdp_device, mhdp);
- 	/* Power on PM Domains */
--	imx8qm_attach_pm_domains(hdp);
-+
-+	imx8qm_attach_pm_domains(imx_mhdp);
- 
- 	/* clock init and  rate set */
--	imx8qm_clocks_init(hdp);
-+	imx8qm_clocks_init(imx_mhdp);
- 
--	imx8qm_ipg_clk_set_rate(hdp);
-+	imx8qm_ipg_clk_set_rate(imx_mhdp);
- 
- 	/* Init pixel clock with 148.5MHz before FW init */
--	imx8qm_pixel_clk_set_rate(hdp, 148500000);
-+	imx8qm_pixel_clk_set_rate(imx_mhdp, 148500000);
- 
--	imx8qm_ipg_clk_enable(hdp);
-+	imx8qm_ipg_clk_enable(imx_mhdp);
- 
--	imx8qm_clk_mux(hdp->plat_data->is_dp);
-+	imx8qm_clk_mux(imx_mhdp->mhdp.plat_data->is_dp);
- 
--	imx8qm_pixel_clk_enable(hdp);
-+	imx8qm_pixel_clk_enable(imx_mhdp);
- 
- 	imx8qm_phy_reset(1);
--
--	hdp->csr_pxl_mux_reg = 0;
--	hdp->csr_ctrl0_reg = 0x8;
--	hdp->csr_ctrl0_sec = 0xc;
--	/* iMX8QM HDP register, Remap HPD memory address to low 4K */
--	regmap_write(hdp->regmap_csr, hdp->csr_ctrl0_reg, 0);
--
--	/* configure HDMI/DP core clock */
--	rate = clk_get_rate(hdp->clks.clk_core);
--	cdns_mhdp_set_fw_clk(&hdp->mhdp, rate);
--
--	/* un-reset ucpu */
--	writel(0,  (APB_CTRL << 2) + hdp->mhdp.regs);
--	DRM_INFO("Started firmware!\n");
--
--	ret = cdns_mhdp_check_alive(&hdp->mhdp);
--	if (ret == false) {
--		DRM_ERROR("NO HDMI FW running\n");
--		return -ENXIO;
--	}
--
--	/* turn on IP activity */
--	cdns_mhdp_set_firmware_active(&hdp->mhdp, 1);
--
--	DRM_INFO("HDP FW Version - ver %d verlib %d\n",
--			__raw_readb(VER_L + hdp->mhdp.regs) + (__raw_readb(VER_H + hdp->mhdp.regs) << 8),
--	__raw_readb(VER_LIB_L_ADDR + hdp->mhdp.regs) + (__raw_readb(VER_LIB_H_ADDR + hdp->mhdp.regs) << 8));
--
--	return 0;
- }
- 
--static void cdns_hdmi_imx_encoder_disable(struct drm_encoder *encoder)
-+void cdns_mhdp_plat_init_imx8qm(struct cdns_mhdp_device *mhdp)
- {
--	struct imx_mhdp_device *hdp = encoder->bridge->driver_private;
-+	struct imx_mhdp_device *imx_mhdp =
-+				container_of(mhdp, struct imx_mhdp_device, mhdp);
- 
--	imx8qm_pixel_link_sync_disable(hdp->dual_mode);
--	imx8qm_pixel_link_invalid(hdp->dual_mode);
-+	imx8qm_pixel_link_sync_disable(imx_mhdp->dual_mode);
-+	imx8qm_pixel_link_invalid(imx_mhdp->dual_mode);
- }
- 
--static void cdns_hdmi_imx_encoder_enable(struct drm_encoder *encoder)
-+void cdns_mhdp_plat_deinit_imx8qm(struct cdns_mhdp_device *mhdp)
- {
--	struct imx_mhdp_device *hdp = encoder->bridge->driver_private;
-+	struct imx_mhdp_device *imx_mhdp =
-+				container_of(mhdp, struct imx_mhdp_device, mhdp);
- 
--	imx8qm_pixel_link_valid(hdp->dual_mode);
--	imx8qm_pixel_link_sync_enable(hdp->dual_mode);
-+	imx8qm_pixel_link_valid(imx_mhdp->dual_mode);
-+	imx8qm_pixel_link_sync_enable(imx_mhdp->dual_mode);
- }
- 
--static int cdns_hdmi_imx_encoder_atomic_check(struct drm_encoder *encoder,
--				    struct drm_crtc_state *crtc_state,
--				    struct drm_connector_state *conn_state)
-+void cdns_mhdp_pclk_rate_imx8qm(struct cdns_mhdp_device *mhdp)
- {
--	struct imx_crtc_state *imx_crtc_state = to_imx_crtc_state(crtc_state);
--
--	imx_crtc_state->bus_format = MEDIA_BUS_FMT_RGB101010_1X30;
--	return 0;
--}
-+	struct imx_mhdp_device *imx_mhdp =
-+				container_of(mhdp, struct imx_mhdp_device, mhdp);
- 
--static const struct drm_encoder_helper_funcs cdns_hdmi_imx_encoder_helper_funcs = {
--	.enable     = cdns_hdmi_imx_encoder_enable,
--	.disable    = cdns_hdmi_imx_encoder_disable,
--	.atomic_check = cdns_hdmi_imx_encoder_atomic_check,
--};
--
--static const struct drm_encoder_funcs cdns_hdmi_imx_encoder_funcs = {
--	.destroy = drm_encoder_cleanup,
--};
--
--#if 0
--static struct cdn_plat_data imx8mq_hdmi_drv_data = {
--	.bind	= cdns_hdmi_bind,
--	.unbind	= cdns_hdmi_unbind,
--	.phy_init = cdns_hdmi_phy_set_imx8mq,
--};
--
--static struct cdn_plat_data imx8mq_dp_drv_data = {
--	.bind	= cdns_dp_bind,
--	.unbind	= cdns_dp_unbind,
--	.phy_init = cdns_dp_phy_init_imx8mq,
--};
--#endif
--
--static struct cdn_plat_data imx8qm_hdmi_drv_data = {
--	.bind	= cdns_hdmi_bind,
--	.unbind	= cdns_hdmi_unbind,
--	.phy_init = cdns_hdmi_phy_set_imx8qm,
--	.fw_init = imx8qm_firmware_init,
--	.pclock_change = imx8qm_pixel_clk_rate_change,
--};
--
--static struct cdn_plat_data imx8qm_dp_drv_data = {
--	.bind	= cdns_dp_bind,
--	.unbind	= cdns_dp_unbind,
--	.phy_init = cdns_dp_phy_init_imx8qm,
--	.fw_init = imx8qm_firmware_init,
--	.pclock_change = imx8qm_pixel_clk_rate_change,
--	.is_dp = true,
--};
--
--static const struct of_device_id cdns_hdmi_imx_dt_ids[] = {
--#if 0
--	{ .compatible = "cdn,imx8mq-hdmi",
--	  .data = &imx8mq_hdmi_drv_data
--	},
--	{ .compatible = "cdn,imx8mq-dp",
--	  .data = &imx8mq_dp_drv_data
--	},
--#endif
--	{ .compatible = "cdn,imx8qm-hdmi",
--	  .data = &imx8qm_hdmi_drv_data
--	},
--	{ .compatible = "cdn,imx8qm-dp",
--	  .data = &imx8qm_dp_drv_data
--	},
--	{},
--};
--MODULE_DEVICE_TABLE(of, cdns_hdmi_imx_dt_ids);
--
--static int cdns_hdmi_imx_bind(struct device *dev, struct device *master,
--			    void *data)
--{
--	struct platform_device *pdev = to_platform_device(dev);
--	const struct cdn_plat_data *plat_data;
--	const struct of_device_id *match;
--	struct drm_device *drm = data;
--	struct drm_encoder *encoder;
--	struct imx_hdmi *hdmi;
--	int ret;
-+	/* set pixel clock before video mode setup */
-+	imx8qm_pixel_clk_disable(imx_mhdp);
- 
--	if (!pdev->dev.of_node)
--		return -ENODEV;
-+	imx8qm_pixel_clk_set_rate(imx_mhdp, imx_mhdp->mhdp.mode.clock * 1000);
- 
--	hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
--	if (!hdmi)
--		return -ENOMEM;
--
--	match = of_match_node(cdns_hdmi_imx_dt_ids, pdev->dev.of_node);
--	plat_data = match->data;
--	hdmi->dev = &pdev->dev;
--	encoder = &hdmi->encoder;
--
--	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
--	/*
--	 * If we failed to find the CRTC(s) which this encoder is
--	 * supposed to be connected to, it's because the CRTC has
--	 * not been registered yet.  Defer probing, and hope that
--	 * the required CRTC is added later.
--	 */
--	if (encoder->possible_crtcs == 0)
--		return -EPROBE_DEFER;
--
--	drm_encoder_helper_add(encoder, &cdns_hdmi_imx_encoder_helper_funcs);
--	drm_encoder_init(drm, encoder, &cdns_hdmi_imx_encoder_funcs,
--			 DRM_MODE_ENCODER_TMDS, NULL);
--
--	ret = plat_data->bind(pdev, encoder, plat_data);
--
--	/*
--	 * If cdns_hdmi_bind() fails we'll never call cdns_hdmi_unbind(),
--	 * which would have called the encoder cleanup.  Do it manually.
--	 */
--	if (ret)
--		drm_encoder_cleanup(encoder);
-+	imx8qm_pixel_clk_enable(imx_mhdp);
- 
--	return ret;
-+	/* Config pixel link mux */
-+	imx8qm_pixel_link_mux(imx_mhdp);
- }
- 
--static void cdns_hdmi_imx_unbind(struct device *dev, struct device *master,
--			       void *data)
-+int cdns_mhdp_firmware_init_imx8qm(struct cdns_mhdp_device *mhdp)
- {
--	struct imx_mhdp_device *hdp = dev_get_drvdata(dev);
-+	struct imx_mhdp_device *imx_mhdp =
-+				container_of(mhdp, struct imx_mhdp_device, mhdp);
-+	u32 rate;
-+	int ret;
- 
--	hdp->plat_data->unbind(dev);
--}
-+	imx8qm_mhdp_power_on(mhdp);
- 
--static const struct component_ops cdns_hdmi_imx8qm_ops = {
--	.bind	= cdns_hdmi_imx_bind,
--	.unbind	= cdns_hdmi_imx_unbind,
--};
-+	/* configure HDMI/DP core clock */
-+	rate = clk_get_rate(imx_mhdp->clks.clk_core);
-+	cdns_mhdp_set_fw_clk(&imx_mhdp->mhdp, rate);
- 
--static int cdns_hdmi_imx_probe(struct platform_device *pdev)
--{
--	return component_add(&pdev->dev, &cdns_hdmi_imx8qm_ops);
--}
-+	/* un-reset ucpu */
-+	cdns_mhdp_bus_write(0, &imx_mhdp->mhdp, APB_CTRL);
-+	DRM_INFO("Started firmware!\n");
- 
--static int cdns_hdmi_imx_remove(struct platform_device *pdev)
--{
--	component_del(&pdev->dev, &cdns_hdmi_imx8qm_ops);
-+	ret = cdns_mhdp_check_alive(&imx_mhdp->mhdp);
-+	if (ret == false) {
-+		DRM_ERROR("NO HDMI FW running\n");
-+		return -ENXIO;
-+	}
-+
-+	/* turn on IP activity */
-+	cdns_mhdp_set_firmware_active(&imx_mhdp->mhdp, 1);
-+
-+	DRM_INFO("HDP FW Version - ver %d verlib %d\n",
-+			cdns_mhdp_bus_read(mhdp, VER_L) + (cdns_mhdp_bus_read(mhdp, VER_H) << 8),
-+			cdns_mhdp_bus_read(mhdp, VER_LIB_H_ADDR) + (cdns_mhdp_bus_read(mhdp, VER_LIB_H_ADDR) << 8));
- 
- 	return 0;
- }
--
--static struct platform_driver cdns_hdmi_imx_platform_driver = {
--	.probe  = cdns_hdmi_imx_probe,
--	.remove = cdns_hdmi_imx_remove,
--	.driver = {
--		.name = "cdn-hdp-imx8qm",
--		.of_match_table = cdns_hdmi_imx_dt_ids,
--	},
--};
--
--module_platform_driver(cdns_hdmi_imx_platform_driver);
--
--MODULE_AUTHOR("Sandor YU <sandor.yu@nxp.com>");
--MODULE_LICENSE("GPL");
--MODULE_ALIAS("platform:cdnhdmi-imx");
---- /dev/null
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
-@@ -0,0 +1,202 @@
-+/*
-+ * copyright (c) 2019 nxp semiconductor, inc.
-+ *
-+ * this program is free software; you can redistribute it and/or modify
-+ * it under the terms of the gnu general public license version 2 as
-+ * published by the free software foundation.
-+ */
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/component.h>
-+#include <drm/drm_of.h>
-+#include <drm/drmP.h>
-+#include <drm/drm_crtc_helper.h>
-+#include <drm/drm_encoder_slave.h>
-+
-+#include "cdns-mhdp-imx.h"
-+#include "cdn-mhdp-phy.h"
-+#include "imx-drm.h"
-+
-+static void cdns_mhdp_imx_encoder_disable(struct drm_encoder *encoder)
-+{
-+	struct cdns_mhdp_device *mhdp = encoder->bridge->driver_private;
-+
-+	cdns_mhdp_plat_call(mhdp, plat_init);
-+}
-+
-+static void cdns_mhdp_imx_encoder_enable(struct drm_encoder *encoder)
-+{
-+	struct cdns_mhdp_device *mhdp = encoder->bridge->driver_private;
-+
-+	cdns_mhdp_plat_call(mhdp, plat_deinit);
-+}
-+
-+static int cdns_mhdp_imx_encoder_atomic_check(struct drm_encoder *encoder,
-+				    struct drm_crtc_state *crtc_state,
-+				    struct drm_connector_state *conn_state)
-+{
-+	struct imx_crtc_state *imx_crtc_state = to_imx_crtc_state(crtc_state);
-+	struct cdns_mhdp_device *mhdp = encoder->bridge->driver_private;
-+
-+	if (mhdp->plat_data->video_format != 0)
-+		imx_crtc_state->bus_format = mhdp->plat_data->video_format;
-+	return 0;
-+}
-+
-+static const struct drm_encoder_helper_funcs cdns_mhdp_imx_encoder_helper_funcs = {
-+	.enable     = cdns_mhdp_imx_encoder_enable,
-+	.disable    = cdns_mhdp_imx_encoder_disable,
-+	.atomic_check = cdns_mhdp_imx_encoder_atomic_check,
-+};
-+
-+static const struct drm_encoder_funcs cdns_mhdp_imx_encoder_funcs = {
-+	.destroy = drm_encoder_cleanup,
-+};
-+
-+static struct cdns_plat_data imx8mq_hdmi_drv_data = {
-+	.bind	= cdns_hdmi_bind,
-+	.unbind	= cdns_hdmi_unbind,
-+	.phy_set = cdns_hdmi_phy_set_imx8mq,
-+	.bus_type = BUS_TYPE_NORMAL_APB,
-+};
-+
-+static struct cdns_plat_data imx8mq_dp_drv_data = {
-+	.bind	= cdns_dp_bind,
-+	.unbind	= cdns_dp_unbind,
-+	.phy_set = cdns_dp_phy_set_imx8mq,
-+	.bus_type = BUS_TYPE_NORMAL_APB,
-+};
-+
-+static struct cdns_plat_data imx8qm_hdmi_drv_data = {
-+	.bind	= cdns_hdmi_bind,
-+	.unbind	= cdns_hdmi_unbind,
-+	.phy_set = cdns_hdmi_phy_set_imx8qm,
-+	.firmware_init = cdns_mhdp_firmware_init_imx8qm,
-+	.pclk_rate = cdns_mhdp_pclk_rate_imx8qm,
-+	.plat_init = cdns_mhdp_plat_init_imx8qm,
-+	.plat_deinit = cdns_mhdp_plat_deinit_imx8qm,
-+	.bus_type = BUS_TYPE_LOW4K_APB,
-+	.video_format =  MEDIA_BUS_FMT_RGB101010_1X30,
-+};
-+
-+static struct cdns_plat_data imx8qm_dp_drv_data = {
-+	.bind	= cdns_dp_bind,
-+	.unbind	= cdns_dp_unbind,
-+	.phy_set = cdns_dp_phy_set_imx8qm,
-+	.firmware_init = cdns_mhdp_firmware_init_imx8qm,
-+	.pclk_rate = cdns_mhdp_pclk_rate_imx8qm,
-+	.plat_init = cdns_mhdp_plat_init_imx8qm,
-+	.plat_deinit = cdns_mhdp_plat_deinit_imx8qm,
-+	.bus_type = BUS_TYPE_LOW4K_APB,
-+	.video_format =  MEDIA_BUS_FMT_RGB101010_1X30,
-+	.is_dp = true,
-+};
-+
-+static const struct of_device_id cdns_mhdp_imx_dt_ids[] = {
-+	{ .compatible = "cdn,imx8mq-hdmi",
-+	  .data = &imx8mq_hdmi_drv_data
-+	},
-+	{ .compatible = "cdn,imx8mq-dp",
-+	  .data = &imx8mq_dp_drv_data
-+	},
-+	{ .compatible = "cdn,imx8qm-hdmi",
-+	  .data = &imx8qm_hdmi_drv_data
-+	},
-+	{ .compatible = "cdn,imx8qm-dp",
-+	  .data = &imx8qm_dp_drv_data
-+	},
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, cdns_mhdp_imx_dt_ids);
-+
-+static int cdns_mhdp_imx_bind(struct device *dev, struct device *master,
-+			    void *data)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	const struct cdns_plat_data *plat_data;
-+	const struct of_device_id *match;
-+	struct drm_device *drm = data;
-+	struct drm_encoder *encoder;
-+	struct imx_mhdp_device *imx_mhdp;
-+	int ret;
-+
-+	if (!pdev->dev.of_node)
-+		return -ENODEV;
-+
-+	imx_mhdp = devm_kzalloc(&pdev->dev, sizeof(*imx_mhdp), GFP_KERNEL);
-+	if (!imx_mhdp)
-+		return -ENOMEM;
-+
-+	match = of_match_node(cdns_mhdp_imx_dt_ids, pdev->dev.of_node);
-+	plat_data = match->data;
-+	encoder = &imx_mhdp->encoder;
-+
-+	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
-+	/*
-+	 * If we failed to find the CRTC(s) which this encoder is
-+	 * supposed to be connected to, it's because the CRTC has
-+	 * not been registered yet.  Defer probing, and hope that
-+	 * the required CRTC is added later.
-+	 */
-+	if (encoder->possible_crtcs == 0)
-+		return -EPROBE_DEFER;
-+
-+	drm_encoder_helper_add(encoder, &cdns_mhdp_imx_encoder_helper_funcs);
-+	drm_encoder_init(drm, encoder, &cdns_mhdp_imx_encoder_funcs,
-+			 DRM_MODE_ENCODER_TMDS, NULL);
-+
-+
-+	imx_mhdp->mhdp.plat_data = plat_data;
-+	imx_mhdp->mhdp.dev = dev;
-+	imx_mhdp->mhdp.bus_type = plat_data->bus_type;
-+	ret = plat_data->bind(pdev, encoder, &imx_mhdp->mhdp);
-+	/*
-+	 * If cdns_mhdp_bind() fails we'll never call cdns_mhdp_unbind(),
-+	 * which would have called the encoder cleanup.  Do it manually.
-+	 */
-+	if (ret < 0)
-+		drm_encoder_cleanup(encoder);
-+
-+	imx_mhdp->dual_mode = false;
-+	return ret;
-+}
-+
-+static void cdns_mhdp_imx_unbind(struct device *dev, struct device *master,
-+			       void *data)
-+{
-+	struct imx_mhdp_device *imx_mhdp = dev_get_drvdata(dev);
-+
-+	imx_mhdp->mhdp.plat_data->unbind(dev);
-+}
-+
-+static const struct component_ops cdns_mhdp_imx_ops = {
-+	.bind	= cdns_mhdp_imx_bind,
-+	.unbind	= cdns_mhdp_imx_unbind,
-+};
-+
-+static int cdns_mhdp_imx_probe(struct platform_device *pdev)
-+{
-+	return component_add(&pdev->dev, &cdns_mhdp_imx_ops);
-+}
-+
-+static int cdns_mhdp_imx_remove(struct platform_device *pdev)
-+{
-+	component_del(&pdev->dev, &cdns_mhdp_imx_ops);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver cdns_mhdp_imx_platform_driver = {
-+	.probe  = cdns_mhdp_imx_probe,
-+	.remove = cdns_mhdp_imx_remove,
-+	.driver = {
-+		.name = "cdn-hdp-imx8qm",
-+		.of_match_table = cdns_mhdp_imx_dt_ids,
-+	},
-+};
-+
-+module_platform_driver(cdns_mhdp_imx_platform_driver);
-+
-+MODULE_AUTHOR("Sandor YU <sandor.yu@nxp.com>");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:cdnhdmi-imx");
---- a/drivers/gpu/drm/imx/cdn-mhdp-phy.h
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-phy.h
-@@ -10,7 +10,7 @@
- #ifndef _CDN_DP_PHY_H
- #define _CDN_DP_PHY_H
- 
--#include <drm/bridge/cdns-mhdp-imx.h>
-+#include <drm/bridge/cdns-mhdp-common.h>
- 
- #define CMN_SSM_BIAS_TMR                0x0022
- #define CMN_PLLSM0_PLLEN_TMR            0x0029
-@@ -146,8 +146,8 @@
- #define PHY_PMA_ISO_RX_DATA_LO          0xCC16
- #define PHY_PMA_ISO_RX_DATA_HI          0xCC17
- 
--int cdns_dp_phy_init_imx8mq(struct imx_mhdp_device *hdp);
--int cdns_dp_phy_init_imx8qm(struct imx_mhdp_device *hdp);
--int cdns_hdmi_phy_set_imx8mq(struct imx_mhdp_device *hdp);
--int cdns_hdmi_phy_set_imx8qm(struct imx_mhdp_device *hdp);
--#endif /* _CDN_DP_PHY_H */
-+int cdns_dp_phy_set_imx8mq(struct cdns_mhdp_device *hdp);
-+int cdns_dp_phy_set_imx8qm(struct cdns_mhdp_device *hdp);
-+int cdns_hdmi_phy_set_imx8mq(struct cdns_mhdp_device *hdp);
-+int cdns_hdmi_phy_set_imx8qm(struct cdns_mhdp_device *hdp);
-+#endif /* _CDNS_MHDP_PHY_H */
---- /dev/null
-+++ b/drivers/gpu/drm/imx/cdns-mhdp-imx.h
-@@ -0,0 +1,80 @@
-+/*
-+ * Cadence High-Definition Multimedia Interface (HDMI) driver
-+ *
-+ * Copyright (C) 2019 NXP Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+#ifndef CDNS_MHDP_IMX_H_
-+#define CDNS_MHDP_IMX_H_
-+
-+#include <drm/bridge/cdns-mhdp-common.h>
-+#include <drm/drm_encoder_slave.h>
-+
-+
-+#define HDP_DUAL_MODE_MIN_PCLK_RATE	300000	/* KHz */
-+#define HDP_SINGLE_MODE_MAX_WIDTH	1920
-+
-+static inline bool video_is_dual_mode(const struct drm_display_mode *mode)
-+{
-+	return (mode->clock > HDP_DUAL_MODE_MIN_PCLK_RATE ||
-+		mode->hdisplay > HDP_SINGLE_MODE_MAX_WIDTH) ? true : false;
-+}
-+
-+struct imx_mhdp_device;
-+
-+struct imx_hdp_clks {
-+	struct clk *av_pll;
-+	struct clk *dig_pll;
-+	struct clk *clk_ipg;
-+	struct clk *clk_core;
-+	struct clk *clk_pxl;
-+	struct clk *clk_pxl_mux;
-+	struct clk *clk_pxl_link;
-+
-+	struct clk *lpcg_hdp;
-+	struct clk *lpcg_msi;
-+	struct clk *lpcg_pxl;
-+	struct clk *lpcg_vif;
-+	struct clk *lpcg_lis;
-+	struct clk *lpcg_apb;
-+	struct clk *lpcg_apb_csr;
-+	struct clk *lpcg_apb_ctrl;
-+
-+	struct clk *lpcg_i2s;
-+	struct clk *clk_i2s_bypass;
-+};
-+
-+struct imx_mhdp_device {
-+	struct cdns_mhdp_device mhdp;
-+	struct drm_encoder encoder;
-+
-+	struct mutex audio_mutex;
-+	spinlock_t audio_lock;
-+	bool connected;
-+	bool active;
-+	bool suspended;
-+	struct imx_hdp_clks clks;
-+
-+	int bus_type;
-+
-+	u32 dual_mode;
-+
-+	struct device		*pd_mhdp_dev;
-+	struct device		*pd_pll0_dev;
-+	struct device		*pd_pll1_dev;
-+	struct device_link	*pd_mhdp_link;
-+	struct device_link	*pd_pll0_link;
-+	struct device_link	*pd_pll1_link;
-+
-+//	u32 phy_init;
-+};
-+void cdns_mhdp_plat_init_imx8qm(struct cdns_mhdp_device *mhdp);
-+void cdns_mhdp_plat_deinit_imx8qm(struct cdns_mhdp_device *mhdp);
-+void cdns_mhdp_pclk_rate_imx8qm(struct cdns_mhdp_device *mhdp);
-+int cdns_mhdp_firmware_init_imx8qm(struct cdns_mhdp_device *mhdp);
-+#endif /* CDNS_MHDP_IMX_H_ */
diff --git a/target/linux/layerscape/patches-5.4/805-display-0012-drm-rockchip-change-base-address-name-from-regs-to-r.patch b/target/linux/layerscape/patches-5.4/805-display-0012-drm-rockchip-change-base-address-name-from-regs-to-r.patch
deleted file mode 100644
index bb87fbcfbd..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0012-drm-rockchip-change-base-address-name-from-regs-to-r.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From ef19c896ef02d33d5236ef70a53e5ca1ad06b9c9 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Wed, 11 Sep 2019 17:36:25 +0800
-Subject: [PATCH] drm: rockchip: change base address name from regs to
- regs_base
-
-change the regs name to regs_base according the bridge druver.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/rockchip/cdn-dp-core.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
-+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
-@@ -718,10 +718,10 @@ static int cdn_dp_parse_dt(struct cdn_dp
- 	}
- 
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	dp->mhdp.regs = devm_ioremap_resource(dev, res);
--	if (IS_ERR(dp->mhdp.regs)) {
-+	dp->mhdp.regs_base = devm_ioremap_resource(dev, res);
-+	if (IS_ERR(dp->mhdp.regs_base)) {
- 		DRM_DEV_ERROR(dev, "ioremap reg failed\n");
--		return PTR_ERR(dp->mhdp.regs);
-+		return PTR_ERR(dp->mhdp.regs_base);
- 	}
- 
- 	dp->core_clk = devm_clk_get(dev, "core-clk");
diff --git a/target/linux/layerscape/patches-5.4/805-display-0013-drm-bridge-cadence-Add-power_on-to-__cdns_dp_probe.patch b/target/linux/layerscape/patches-5.4/805-display-0013-drm-bridge-cadence-Add-power_on-to-__cdns_dp_probe.patch
deleted file mode 100644
index a58e75c499..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0013-drm-bridge-cadence-Add-power_on-to-__cdns_dp_probe.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 9737dd813b872f5671d40685d2174a928da809a3 Mon Sep 17 00:00:00 2001
-From: Wen He <wen.he_1@nxp.com>
-Date: Tue, 17 Sep 2019 15:23:51 +0800
-Subject: [PATCH] drm: bridge: cadence: Add power_on to __cdns_dp_probe
-
-Add power_on of the cnds_plat_data to __cdns_dp_probe as to update
-Board related configuration initalization.
-
-Signed-off-by: Wen He <wen.he_1@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c   | 2 ++
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c | 2 ++
- drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c           | 6 +++---
- drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c           | 2 ++
- drivers/gpu/drm/imx/cdns-mhdp-imx.h             | 1 +
- 5 files changed, 10 insertions(+), 3 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -457,6 +457,8 @@ static int __cdns_dp_probe(struct platfo
- 
- 	cdns_dp_parse_dt(mhdp);
- 
-+	cdns_mhdp_plat_call(mhdp, power_on);
-+
- //	mhdp->dual_mode = false;
- 	cdns_mhdp_plat_call(mhdp, firmware_init);
- 
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -449,6 +449,8 @@ static int __cdns_hdmi_probe(struct plat
- 	/* Initialize dual_mode to false */
- //	hdmi->dual_mode = false;
- 
-+	cdns_mhdp_plat_call(mhdp, power_on);
-+
- 	/* Initialize FW */
- 	cdns_mhdp_plat_call(mhdp, firmware_init);
- 
---- a/drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c
-@@ -440,7 +440,7 @@ fail:
- 	return ret;
- }
- 
--static void imx8qm_mhdp_power_on(struct cdns_mhdp_device *mhdp)
-+int cdns_mhdp_power_on_imx8qm(struct cdns_mhdp_device *mhdp)
- {
- 	struct imx_mhdp_device *imx_mhdp =
- 				container_of(mhdp, struct imx_mhdp_device, mhdp);
-@@ -463,6 +463,8 @@ static void imx8qm_mhdp_power_on(struct
- 	imx8qm_pixel_clk_enable(imx_mhdp);
- 
- 	imx8qm_phy_reset(1);
-+
-+	return 0;
- }
- 
- void cdns_mhdp_plat_init_imx8qm(struct cdns_mhdp_device *mhdp)
-@@ -506,8 +508,6 @@ int cdns_mhdp_firmware_init_imx8qm(struc
- 	u32 rate;
- 	int ret;
- 
--	imx8qm_mhdp_power_on(mhdp);
--
- 	/* configure HDMI/DP core clock */
- 	rate = clk_get_rate(imx_mhdp->clks.clk_core);
- 	cdns_mhdp_set_fw_clk(&imx_mhdp->mhdp, rate);
---- a/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
-@@ -71,6 +71,7 @@ static struct cdns_plat_data imx8qm_hdmi
- 	.bind	= cdns_hdmi_bind,
- 	.unbind	= cdns_hdmi_unbind,
- 	.phy_set = cdns_hdmi_phy_set_imx8qm,
-+	.power_on = cdns_mhdp_power_on_imx8qm,
- 	.firmware_init = cdns_mhdp_firmware_init_imx8qm,
- 	.pclk_rate = cdns_mhdp_pclk_rate_imx8qm,
- 	.plat_init = cdns_mhdp_plat_init_imx8qm,
-@@ -83,6 +84,7 @@ static struct cdns_plat_data imx8qm_dp_d
- 	.bind	= cdns_dp_bind,
- 	.unbind	= cdns_dp_unbind,
- 	.phy_set = cdns_dp_phy_set_imx8qm,
-+	.power_on = cdns_mhdp_power_on_imx8qm,
- 	.firmware_init = cdns_mhdp_firmware_init_imx8qm,
- 	.pclk_rate = cdns_mhdp_pclk_rate_imx8qm,
- 	.plat_init = cdns_mhdp_plat_init_imx8qm,
---- a/drivers/gpu/drm/imx/cdns-mhdp-imx.h
-+++ b/drivers/gpu/drm/imx/cdns-mhdp-imx.h
-@@ -77,4 +77,5 @@ void cdns_mhdp_plat_init_imx8qm(struct c
- void cdns_mhdp_plat_deinit_imx8qm(struct cdns_mhdp_device *mhdp);
- void cdns_mhdp_pclk_rate_imx8qm(struct cdns_mhdp_device *mhdp);
- int cdns_mhdp_firmware_init_imx8qm(struct cdns_mhdp_device *mhdp);
-+int cdns_mhdp_power_on_imx8qm(struct cdns_mhdp_device *mhdp);
- #endif /* CDNS_MHDP_IMX_H_ */
diff --git a/target/linux/layerscape/patches-5.4/805-display-0014-drm-ls1028a-Add-DP-driver-support-for-LS1028A.patch b/target/linux/layerscape/patches-5.4/805-display-0014-drm-ls1028a-Add-DP-driver-support-for-LS1028A.patch
deleted file mode 100644
index c84b119a4f..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0014-drm-ls1028a-Add-DP-driver-support-for-LS1028A.patch
+++ /dev/null
@@ -1,186 +0,0 @@
-From 06e912bd821b21d9360a75cde2d78b03f17a5872 Mon Sep 17 00:00:00 2001
-From: Wen He <wen.he_1@nxp.com>
-Date: Tue, 17 Sep 2019 15:35:52 +0800
-Subject: [PATCH] drm: ls1028a: Add DP driver support for LS1028A
-
-Add Display Port driver support for NXP Layerscape LS1028A platform.
-
-Signed-off-by: Wen He <wen.he_1@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c |   1 +
- drivers/gpu/drm/imx/Makefile                  |   2 +-
- drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c         |  13 +++
- drivers/gpu/drm/imx/cdn-mhdp-ls1028a.c        | 110 ++++++++++++++++++++++++++
- drivers/gpu/drm/imx/cdns-mhdp-imx.h           |   2 +
- 5 files changed, 127 insertions(+), 1 deletion(-)
- create mode 100644 drivers/gpu/drm/imx/cdn-mhdp-ls1028a.c
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -275,6 +275,7 @@ static int cdns_dp_bridge_attach(struct
- 	struct drm_connector *connector = &mhdp->connector.base;
- 
- 	connector->interlace_allowed = 1;
-+
- 	connector->polled = DRM_CONNECTOR_POLL_HPD;
- 
- 	drm_connector_helper_add(connector, &cdns_dp_connector_helper_funcs);
---- a/drivers/gpu/drm/imx/Makefile
-+++ b/drivers/gpu/drm/imx/Makefile
-@@ -9,4 +9,4 @@ obj-$(CONFIG_DRM_IMX_TVE) += imx-tve.o
- obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o
- 
- obj-$(CONFIG_DRM_IMX_HDMI) += dw_hdmi-imx.o
--obj-$(CONFIG_DRM_IMX_CDNS_MHDP) += cdn-mhdp-imxdrv.o cdn-mhdp-dp-phy.o cdn-mhdp-hdmi-phy.o cdn-mhdp-imx8qm.o
-+obj-$(CONFIG_DRM_IMX_CDNS_MHDP) += cdn-mhdp-imxdrv.o cdn-mhdp-dp-phy.o cdn-mhdp-hdmi-phy.o cdn-mhdp-imx8qm.o cdn-mhdp-ls1028a.o
---- a/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
-@@ -94,6 +94,16 @@ static struct cdns_plat_data imx8qm_dp_d
- 	.is_dp = true,
- };
- 
-+static struct cdns_plat_data ls1028a_dp_drv_data = {
-+	.bind = cdns_dp_bind,
-+	.unbind = cdns_dp_unbind,
-+	.phy_set = cdns_dp_phy_set_imx8mq,
-+	.power_on = cdns_mhdp_power_on_ls1028a,
-+	.firmware_init = cdns_mhdp_firmware_init_imx8qm,
-+	.pclk_rate = cdns_mhdp_pclk_rate_ls1028a,
-+	.bus_type = BUS_TYPE_NORMAL_APB,
-+};
-+
- static const struct of_device_id cdns_mhdp_imx_dt_ids[] = {
- 	{ .compatible = "cdn,imx8mq-hdmi",
- 	  .data = &imx8mq_hdmi_drv_data
-@@ -107,6 +117,9 @@ static const struct of_device_id cdns_mh
- 	{ .compatible = "cdn,imx8qm-dp",
- 	  .data = &imx8qm_dp_drv_data
- 	},
-+	{ .compatible = "cdn,ls1028a-dp",
-+	  .data = &ls1028a_dp_drv_data
-+	},
- 	{},
- };
- MODULE_DEVICE_TABLE(of, cdns_mhdp_imx_dt_ids);
---- /dev/null
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-ls1028a.c
-@@ -0,0 +1,110 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 NXP
-+ *
-+ */
-+#include <linux/clk.h>
-+#include <drm/drmP.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+
-+#include "cdns-mhdp-imx.h"
-+
-+static const struct of_device_id scfg_device_ids[] = {
-+	{ .compatible = "fsl,ls1028a-scfg", },
-+	{}
-+};
-+
-+static void ls1028a_phy_reset(u8 reset)
-+{
-+	struct device_node *scfg_node;
-+	void __iomem *scfg_base = NULL;
-+
-+	scfg_node = of_find_matching_node(NULL, scfg_device_ids);
-+	if (scfg_node)
-+		scfg_base = of_iomap(scfg_node, 0);
-+
-+	iowrite32(reset, scfg_base + 0x230);
-+}
-+
-+int ls1028a_clocks_init(struct imx_mhdp_device *imx_mhdp)
-+{
-+	struct device *dev = imx_mhdp->mhdp.dev;
-+	struct imx_hdp_clks *clks = &imx_mhdp->clks;
-+
-+	clks->clk_core = devm_clk_get(dev, "clk_core");
-+	if (IS_ERR(clks->clk_core)) {
-+		dev_warn(dev, "failed to get hdp core clk\n");
-+		return PTR_ERR(clks->clk_core);
-+	}
-+
-+	clks->clk_pxl = devm_clk_get(dev, "clk_pxl");
-+	if (IS_ERR(clks->clk_pxl)) {
-+		dev_warn(dev, "failed to get pxl clk\n");
-+		return PTR_ERR(clks->clk_pxl);
-+	}
-+
-+	return true;
-+}
-+
-+static int ls1028a_pixel_clk_enable(struct imx_mhdp_device *imx_mhdp)
-+{
-+	struct imx_hdp_clks *clks = &imx_mhdp->clks;
-+	struct device *dev = imx_mhdp->mhdp.dev;
-+	int ret;
-+
-+	ret = clk_prepare_enable(clks->clk_pxl);
-+	if (ret < 0) {
-+		dev_err(dev, "%s, pre clk pxl error\n", __func__);
-+		return ret;
-+	}
-+
-+	return ret;
-+}
-+
-+static void ls1028a_pixel_clk_disable(struct imx_mhdp_device *imx_mhdp)
-+{
-+	struct imx_hdp_clks *clks = &imx_mhdp->clks;
-+
-+	clk_disable_unprepare(clks->clk_pxl);
-+}
-+
-+static void ls1028a_pixel_clk_set_rate(struct imx_mhdp_device *imx_mhdp,
-+				       u32 pclock)
-+{
-+	struct imx_hdp_clks *clks = &imx_mhdp->clks;
-+
-+	clk_set_rate(clks->clk_pxl, pclock);
-+}
-+
-+int cdns_mhdp_power_on_ls1028a(struct cdns_mhdp_device *mhdp)
-+{
-+	struct imx_mhdp_device *imx_mhdp = container_of
-+				(mhdp, struct imx_mhdp_device, mhdp);
-+
-+	/* clock init and  rate set */
-+	ls1028a_clocks_init(imx_mhdp);
-+
-+	ls1028a_pixel_clk_enable(imx_mhdp);
-+
-+	/* Init pixel clock with 148.5MHz before FW init */
-+	ls1028a_pixel_clk_set_rate(imx_mhdp, 148500000);
-+
-+	ls1028a_phy_reset(1);
-+
-+	return 0;
-+}
-+
-+void cdns_mhdp_pclk_rate_ls1028a(struct cdns_mhdp_device *mhdp)
-+{
-+	struct imx_mhdp_device *imx_mhdp = container_of
-+				(mhdp, struct imx_mhdp_device, mhdp);
-+
-+	/* set pixel clock before video mode setup */
-+	ls1028a_pixel_clk_disable(imx_mhdp);
-+
-+	ls1028a_pixel_clk_set_rate(imx_mhdp, imx_mhdp->mhdp.mode.clock * 1000);
-+
-+	ls1028a_pixel_clk_enable(imx_mhdp);
-+}
---- a/drivers/gpu/drm/imx/cdns-mhdp-imx.h
-+++ b/drivers/gpu/drm/imx/cdns-mhdp-imx.h
-@@ -78,4 +78,6 @@ void cdns_mhdp_plat_deinit_imx8qm(struct
- void cdns_mhdp_pclk_rate_imx8qm(struct cdns_mhdp_device *mhdp);
- int cdns_mhdp_firmware_init_imx8qm(struct cdns_mhdp_device *mhdp);
- int cdns_mhdp_power_on_imx8qm(struct cdns_mhdp_device *mhdp);
-+int cdns_mhdp_power_on_ls1028a(struct cdns_mhdp_device *mhdp);
-+void cdns_mhdp_pclk_rate_ls1028a(struct cdns_mhdp_device *mhdp);
- #endif /* CDNS_MHDP_IMX_H_ */
diff --git a/target/linux/layerscape/patches-5.4/805-display-0015-drm-bridge-cadence-Add-support-for-periodically-poll.patch b/target/linux/layerscape/patches-5.4/805-display-0015-drm-bridge-cadence-Add-support-for-periodically-poll.patch
deleted file mode 100644
index 80dc0cc3e5..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0015-drm-bridge-cadence-Add-support-for-periodically-poll.patch
+++ /dev/null
@@ -1,148 +0,0 @@
-From 35e2ec234646f04eb0e17e4c3a4cf21faed3655a Mon Sep 17 00:00:00 2001
-From: Wen He <wen.he_1@nxp.com>
-Date: Wed, 18 Sep 2019 11:05:31 +0800
-Subject: [PATCH] drm: bridge: cadence: Add support for periodically poll the
- connector
-
-Normally, DP/HDMI PHY use HPD_IRQ to monitor the connector connection
-status, but LS1028A doesn't support HPD_IRQ signals response.
-
-This patch allows periodically poll the connector for connection and
-disconnection.
-
-Signed-off-by: Wen He <wen.he_1@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c | 86 +++++++++++++++++----------
- include/drm/bridge/cdns-mhdp-common.h         |  1 +
- 2 files changed, 54 insertions(+), 33 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -276,7 +276,11 @@ static int cdns_dp_bridge_attach(struct
- 
- 	connector->interlace_allowed = 1;
- 
--	connector->polled = DRM_CONNECTOR_POLL_HPD;
-+	if (mhdp->is_hpd)
-+		connector->polled = DRM_CONNECTOR_POLL_HPD;
-+	else
-+		connector->polled = DRM_CONNECTOR_POLL_CONNECT |
-+		DRM_CONNECTOR_POLL_DISCONNECT;
- 
- 	drm_connector_helper_add(connector, &cdns_dp_connector_helper_funcs);
- 
-@@ -439,22 +443,34 @@ static int __cdns_dp_probe(struct platfo
- 	INIT_DELAYED_WORK(&mhdp->hotplug_work, hotplug_work_func);
- 
- 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	mhdp->regs_base = devm_ioremap(dev, iores->start, resource_size(iores));
--	if (IS_ERR(mhdp->regs_base))
--		return -ENOMEM;
-+	if (iores) {
-+		mhdp->regs_base = devm_ioremap(dev, iores->start,
-+					       resource_size(iores));
-+		if (IS_ERR(mhdp->regs_base))
-+			return -ENOMEM;
-+	}
- 
- 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 1);
--	mhdp->regs_sec = devm_ioremap(dev, iores->start, resource_size(iores));
--	if (IS_ERR(mhdp->regs_sec))
--		return -ENOMEM;
-+	if (iores) {
-+		mhdp->regs_sec = devm_ioremap(dev, iores->start,
-+					      resource_size(iores));
-+		if (IS_ERR(mhdp->regs_sec))
-+			return -ENOMEM;
-+	}
-+
-+	mhdp->is_hpd = true;
- 
- 	mhdp->irq[IRQ_IN] = platform_get_irq_byname(pdev, "plug_in");
--	if (mhdp->irq[IRQ_IN] < 0)
-+	if (mhdp->irq[IRQ_IN] < 0) {
-+		mhdp->is_hpd = false;
- 		dev_info(dev, "No plug_in irq number\n");
-+	}
- 
- 	mhdp->irq[IRQ_OUT] = platform_get_irq_byname(pdev, "plug_out");
--	if (mhdp->irq[IRQ_OUT] < 0)
-+	if (mhdp->irq[IRQ_OUT] < 0) {
-+		mhdp->is_hpd = false;
- 		dev_info(dev, "No plug_out irq number\n");
-+	}
- 
- 	cdns_dp_parse_dt(mhdp);
- 
-@@ -474,33 +490,37 @@ static int __cdns_dp_probe(struct platfo
- 	cdns_mhdp_plat_call(mhdp, phy_set);
- 
- 	/* Enable Hotplug Detect IRQ thread */
--	irq_set_status_flags(mhdp->irq[IRQ_IN], IRQ_NOAUTOEN);
--	ret = devm_request_threaded_irq(dev, mhdp->irq[IRQ_IN],
--					NULL, cdns_dp_irq_thread,
--					IRQF_ONESHOT, dev_name(dev),
--					mhdp);
--	if (ret) {
--		dev_err(dev, "can't claim irq %d\n",
--						mhdp->irq[IRQ_IN]);
--		return -EINVAL;
--	}
-+	if (mhdp->is_hpd) {
-+		irq_set_status_flags(mhdp->irq[IRQ_IN], IRQ_NOAUTOEN);
-+		ret = devm_request_threaded_irq(dev, mhdp->irq[IRQ_IN],
-+						NULL, cdns_dp_irq_thread,
-+						IRQF_ONESHOT, dev_name(dev),
-+						mhdp);
- 	
--	irq_set_status_flags(mhdp->irq[IRQ_OUT], IRQ_NOAUTOEN);
--	ret = devm_request_threaded_irq(dev, mhdp->irq[IRQ_OUT],
--					NULL, cdns_dp_irq_thread,
--					IRQF_ONESHOT, dev_name(dev),
--					mhdp);
--	if (ret) {
--		dev_err(dev, "can't claim irq %d\n",
--						mhdp->irq[IRQ_OUT]);
--		return -EINVAL;
-+		if (ret) {
-+			dev_err(dev, "can't claim irq %d\n",
-+					mhdp->irq[IRQ_IN]);
-+			return -EINVAL;
-+		}
-+
-+		irq_set_status_flags(mhdp->irq[IRQ_OUT], IRQ_NOAUTOEN);
-+		ret = devm_request_threaded_irq(dev, mhdp->irq[IRQ_OUT],
-+						NULL, cdns_dp_irq_thread,
-+						IRQF_ONESHOT, dev_name(dev),
-+						mhdp);
-+
-+		if (ret) {
-+			dev_err(dev, "can't claim irq %d\n",
-+					mhdp->irq[IRQ_OUT]);
-+			return -EINVAL;
-+		}
-+
-+		if (cdns_mhdp_read_hpd(mhdp))
-+			enable_irq(mhdp->irq[IRQ_OUT]);
-+		else
-+			enable_irq(mhdp->irq[IRQ_IN]);
- 	}
- 
--	if (cdns_mhdp_read_hpd(mhdp))
--		enable_irq(mhdp->irq[IRQ_OUT]);
--	else
--		enable_irq(mhdp->irq[IRQ_IN]);
--
- 	mhdp->bridge.base.driver_private = mhdp;
- 	mhdp->bridge.base.funcs = &cdns_dp_bridge_funcs;
- #ifdef CONFIG_OF
---- a/include/drm/bridge/cdns-mhdp-common.h
-+++ b/include/drm/bridge/cdns-mhdp-common.h
-@@ -683,6 +683,7 @@ struct cdns_mhdp_device {
- 	bool link_up;
- 	bool power_up;
- 	bool plugged;
-+	bool is_hpd;
- 	struct mutex lock;
- 
- 	int irq[IRQ_NUM];
diff --git a/target/linux/layerscape/patches-5.4/805-display-0016-drm-imx-hdmi-support-arc-function.patch b/target/linux/layerscape/patches-5.4/805-display-0016-drm-imx-hdmi-support-arc-function.patch
deleted file mode 100644
index a8876d0126..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0016-drm-imx-hdmi-support-arc-function.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From a10d0b8516bc3f48f0c1005f8e69efce12cea8f9 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Mon, 23 Sep 2019 09:09:38 +0800
-Subject: [PATCH] drm: imx: hdmi: support arc function
-
-Add HDMI ARC configurate function.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/imx/cdn-mhdp-hdmi-phy.c | 59 +++++++++++++++++++++++++++++++++
- 1 file changed, 59 insertions(+)
-
---- a/drivers/gpu/drm/imx/cdn-mhdp-hdmi-phy.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-hdmi-phy.c
-@@ -192,6 +192,62 @@ static const struct hdmi_pll_tuning imx8
- 	{ 7, 5200000, 6000000, 0x7, 0x1, 0x0, 0x04, 0x0D, 680, 0x04F, 0, 0, 0 }
- };
- 
-+static void hdmi_arc_config(struct cdns_mhdp_device *mhdp)
-+{
-+	u16 txpu_calib_code;
-+	u16 txpd_calib_code;
-+	u16 txpu_adj_calib_code;
-+	u16 txpd_adj_calib_code;
-+	u16 prev_calib_code;
-+	u16 new_calib_code;
-+	u16 rdata;
-+
-+	/* Power ARC */
-+	cdns_phy_reg_write(mhdp, TXDA_CYA_AUXDA_CYA, 0x0001);
-+
-+	prev_calib_code = cdns_phy_reg_read(mhdp, TX_DIG_CTRL_REG_2);
-+	txpu_calib_code = cdns_phy_reg_read(mhdp, CMN_TXPUCAL_CTRL);
-+	txpd_calib_code = cdns_phy_reg_read(mhdp, CMN_TXPDCAL_CTRL);
-+	txpu_adj_calib_code = cdns_phy_reg_read(mhdp, CMN_TXPU_ADJ_CTRL);
-+	txpd_adj_calib_code = cdns_phy_reg_read(mhdp, CMN_TXPD_ADJ_CTRL);
-+
-+	new_calib_code = ((txpu_calib_code + txpd_calib_code) / 2)
-+		+ txpu_adj_calib_code + txpd_adj_calib_code;
-+
-+	if (new_calib_code != prev_calib_code) {
-+		rdata = cdns_phy_reg_read(mhdp, TX_ANA_CTRL_REG_1);
-+		rdata &= 0xDFFF;
-+		cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, rdata);
-+		cdns_phy_reg_write(mhdp, TX_DIG_CTRL_REG_2, new_calib_code);
-+		mdelay(10);
-+		rdata |= 0x2000;
-+		cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, rdata);
-+		udelay(150);
-+	}
-+
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_2, 0x0100);
-+	udelay(100);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_2, 0x0300);
-+	udelay(100);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_3, 0x0000);
-+	udelay(100);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, 0x2008);
-+	udelay(100);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, 0x2018);
-+	udelay(100);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, 0x2098);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_2, 0x030C);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_5, 0x0010);
-+	udelay(100);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_4, 0x4001);
-+	mdelay(5);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, 0x2198);
-+	mdelay(5);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_2, 0x030D);
-+	udelay(100);
-+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_2, 0x030F);
-+}
-+
- static void hdmi_phy_set_vswing(struct cdns_mhdp_device *mhdp)
- {
- 	const u32 num_lanes = 4;
-@@ -604,6 +660,9 @@ static int hdmi_phy_power_up(struct cdns
- 		return -1;
- 	}
- 
-+	/* Power up ARC */
-+	hdmi_arc_config(mhdp);
-+
- 	/* Configure PHY in A0 mode (PHY must be in the A0 power
- 	 * state in order to transmit data)
- 	 */
diff --git a/target/linux/layerscape/patches-5.4/805-display-0017-drm-bridge-cadence-Fix-return-value-for-set-log-addr.patch b/target/linux/layerscape/patches-5.4/805-display-0017-drm-bridge-cadence-Fix-return-value-for-set-log-addr.patch
deleted file mode 100644
index 19e14bd392..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0017-drm-bridge-cadence-Fix-return-value-for-set-log-addr.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From ce1e8ad4a303526026e56822a105ed45a19e6572 Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@nxp.com>
-Date: Thu, 26 Sep 2019 17:46:04 +0800
-Subject: [PATCH] drm: bridge: cadence: Fix return value for set log addr
-
-Fix return value for set log addr with cec
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-cec.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp-cec.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-cec.c
-@@ -183,18 +183,18 @@ static int mhdp_cec_set_logical_addr(str
- 
- 		if ((la_reg & 0xF) == la) {
- 			dev_warn(cec->dev, "Warning. LA already in use.\n");
--			return true;
-+			return 0;
- 		}
- 
- 		la = (la & 0xF) | (1 << 4);
- 
- 		mhdp_cec_write(cec, LOGICAL_ADDRESS_LA0 + (i * REG_ADDR_OFF), la);
--		return true;
-+		return 0;
- 	}
- 
- 	dev_warn(cec->dev, "All LA in use\n");
- 
--	return false;
-+	return -EINVAL;
- }
- 
- static int mhdp_cec_poll_worker(void *_cec)
diff --git a/target/linux/layerscape/patches-5.4/805-display-0018-drm-bridge-cdns-dp-Remove-link-rate-lanes-set-by-dev.patch b/target/linux/layerscape/patches-5.4/805-display-0018-drm-bridge-cdns-dp-Remove-link-rate-lanes-set-by-dev.patch
deleted file mode 100644
index fba2ac4f02..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0018-drm-bridge-cdns-dp-Remove-link-rate-lanes-set-by-dev.patch
+++ /dev/null
@@ -1,251 +0,0 @@
-From 79d32025a54899fe7d82c88906c1e3ad911c498d Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Thu, 26 Sep 2019 15:46:43 +0800
-Subject: [PATCH] drm: bridge: cdns dp: Remove link rate/lanes set by device
- tree
-
-Get the link rate and lanes from sink device.
-Remove user specific set by device tree.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c     | 56 ++++++-----------------
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c |  6 +--
- drivers/gpu/drm/rockchip/cdn-dp-core.c            | 27 ++++++-----
- drivers/gpu/drm/rockchip/cdn-dp-core.h            |  1 -
- include/drm/bridge/cdns-mhdp-common.h             |  6 +--
- 5 files changed, 35 insertions(+), 61 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -111,10 +111,10 @@ static void dp_pixel_clk_reset(struct cd
- static void cdns_dp_mode_set(struct cdns_mhdp_device *mhdp,
- 			const struct drm_display_mode *mode)
- {
--	struct drm_dp_link link;
- 	u32 lane_mapping = mhdp->lane_mapping;
--	int ret;
-+	struct drm_dp_link *link = &mhdp->dp.link;
- 	char linkid[6];
-+	int ret;
- 
- 	memcpy(&mhdp->mode, mode, sizeof(struct drm_display_mode));
- 
-@@ -125,8 +125,6 @@ static void cdns_dp_mode_set(struct cdns
- 
- 	cdns_mhdp_plat_call(mhdp, pclk_rate);
- 
--	cdns_mhdp_plat_call(mhdp, phy_set);
--
- 	ret = drm_dp_downstream_id(&mhdp->dp.aux, linkid);
- 	if (ret < 0) {
- 		DRM_INFO("Failed to Get DP link ID: %d\n", ret);
-@@ -137,35 +135,28 @@ static void cdns_dp_mode_set(struct cdns
- 		 linkid[5]);
- 
- 	/* Check dp link */
--	ret = drm_dp_link_probe(&mhdp->dp.aux, &link);
-+	ret = drm_dp_link_probe(&mhdp->dp.aux, link);
- 	if (ret < 0) {
- 		DRM_INFO("Failed to probe DP link: %d\n", ret);
- 		return;
- 	}
--	DRM_INFO("DP revision: 0x%x\n", link.revision);
--	DRM_INFO("DP rate: %d Mbps\n", link.rate);
--	DRM_INFO("DP number of lanes: %d\n", link.num_lanes);
--	DRM_INFO("DP capabilities: 0x%lx\n", link.capabilities);
-+	DRM_INFO("DP revision: 0x%x\n", link->revision);
-+	DRM_INFO("DP rate: %d Mbps\n", link->rate);
-+	DRM_INFO("DP number of lanes: %d\n", link->num_lanes);
-+	DRM_INFO("DP capabilities: 0x%lx\n", link->capabilities);
-+
-+	/* check the max link rate */
-+	if (link->rate > CDNS_DP_MAX_LINK_RATE)
-+		link->rate = CDNS_DP_MAX_LINK_RATE;
- 
--	drm_dp_link_power_up(&mhdp->dp.aux, &mhdp->dp.link);
-+	drm_dp_link_power_up(&mhdp->dp.aux, link);
- 	if (ret < 0) {
- 		DRM_INFO("Failed to power DP link: %d\n", ret);
- 		return;
- 	}
- 
--	/* always use the number of lanes from the display*/
--	mhdp->dp.link.num_lanes = link.num_lanes;
--
--	/* Use the lower link rate */
--	if (mhdp->dp.link_rate != 0) {
--		mhdp->dp.link.rate = min(mhdp->dp.link_rate, (u32)link.rate);
--		DRM_DEBUG("DP actual link rate:  0x%x\n", link.rate);
--	}
--
--	/* initialize phy if lanes or link rate differnt */
--	if (mhdp->dp.link.num_lanes != mhdp->dp.num_lanes ||
--			mhdp->dp.link.rate != mhdp->dp.link_rate)
--		cdns_mhdp_plat_call(mhdp, phy_set);
-+	/* Initialize link rate/num_lanes as panel max link rate/max_num_lanes */
-+	cdns_mhdp_plat_call(mhdp, phy_set);
- 
- 	/* Video off */
- 	ret = cdns_mhdp_set_video_status(mhdp, CONTROL_VIDEO_IDLE);
-@@ -178,7 +169,7 @@ static void cdns_dp_mode_set(struct cdns
- 	cdns_mhdp_reg_write(mhdp, LANES_CONFIG, 0x00400000 | lane_mapping);
- 
- 	/* Set DP host capability */
--	ret = cdns_mhdp_set_host_cap(mhdp, mhdp->dp.link.num_lanes, false);
-+	ret = cdns_mhdp_set_host_cap(mhdp, false);
- 	if (ret) {
- 		DRM_DEV_ERROR(mhdp->dev, "Failed to set host cap %d\n", ret);
- 		return;
-@@ -412,23 +403,6 @@ static void cdns_dp_parse_dt(struct cdns
- 		dev_warn(mhdp->dev, "Failed to get lane_mapping - using default 0xc6\n");
- 	}
- 	dev_info(mhdp->dev, "lane-mapping 0x%02x\n", mhdp->lane_mapping);
--
--	ret = of_property_read_u32(of_node, "link-rate", &mhdp->dp.link_rate);
--	if (ret) {
--		mhdp->dp.link_rate = 162000 ;
--		dev_warn(mhdp->dev, "Failed to get link-rate, use default 1620MHz\n");
--	}
--	dev_info(mhdp->dev, "link-rate %d\n", mhdp->dp.link_rate);
--	
--	ret = of_property_read_u32(of_node, "num-lanes", &mhdp->dp.num_lanes);
--	if (ret) {
--		mhdp->dp.num_lanes = 4;
--		dev_warn(mhdp->dev, "Failed to get num_lanes - using default\n");
--	}
--	dev_info(mhdp->dev, "dp_num_lanes 0x%02x\n", mhdp->dp.num_lanes);
--
--	mhdp->dp.link.num_lanes = mhdp->dp.num_lanes;
--	mhdp->dp.link.rate= mhdp->dp.link_rate;
- }
- 
- static int __cdns_dp_probe(struct platform_device *pdev,
---- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
-@@ -494,13 +494,13 @@ err_set_firmware_active:
- }
- EXPORT_SYMBOL(cdns_mhdp_set_firmware_active);
- 
--int cdns_mhdp_set_host_cap(struct cdns_mhdp_device *mhdp, u8 lanes, bool flip)
-+int cdns_mhdp_set_host_cap(struct cdns_mhdp_device *mhdp, bool flip)
- {
- 	u8 msg[8];
- 	int ret;
- 
--	msg[0] = CDNS_DP_MAX_LINK_RATE;
--	msg[1] = lanes | SCRAMBLER_EN;
-+	msg[0] = drm_dp_link_rate_to_bw_code(mhdp->dp.link.rate);
-+	msg[1] = mhdp->dp.link.num_lanes | SCRAMBLER_EN;
- 	msg[2] = VOLTAGE_LEVEL_2;
- 	msg[3] = PRE_EMPHASIS_LEVEL_3;
- 	msg[4] = PTS1 | PTS2 | PTS3 | PTS4;
---- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
-+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
-@@ -306,12 +306,10 @@ static int cdn_dp_connector_mode_valid(s
- 	requested = mode->clock * bpc * 3 / 1000;
- 
- 	source_max = dp->lanes;
--	sink_max = drm_dp_max_lane_count(dp->dpcd);
-+	sink_max = dp->mhdp.dp.link.num_lanes;
- 	lanes = min(source_max, sink_max);
- 
--	source_max = drm_dp_bw_code_to_link_rate(CDNS_DP_MAX_LINK_RATE);
--	sink_max = drm_dp_max_link_rate(dp->dpcd);
--	rate = min(source_max, sink_max);
-+	rate = dp->mhdp.dp.link.rate;
- 
- 	actual = rate * lanes / 100;
- 
-@@ -366,21 +364,25 @@ static int cdn_dp_firmware_init(struct c
- 
- static int cdn_dp_get_sink_capability(struct cdn_dp_device *dp)
- {
-+	struct cdns_mhdp_device *mhdp = &dp->mhdp;
-+	struct drm_dp_link *link = &mhdp->dp.link;
- 	int ret;
- 
- 	if (!cdn_dp_check_sink_connection(dp))
- 		return -ENODEV;
- 
--	ret = cdns_mhdp_dpcd_read(&dp->mhdp, DP_DPCD_REV, dp->dpcd,
--				  DP_RECEIVER_CAP_SIZE);
-+	ret = drm_dp_link_probe(&mhdp->dp.aux, link);
- 	if (ret) {
--		DRM_DEV_ERROR(dp->mhdp.dev, "Failed to get caps %d\n", ret);
-+		DRM_DEV_ERROR(mhdp->dev, "Failed to get caps %d\n", ret);
- 		return ret;
- 	}
- 
-+	if (link->rate > CDNS_DP_MAX_LINK_RATE)
-+		link->rate = CDNS_DP_MAX_LINK_RATE;
-+
- 	kfree(dp->edid);
--	dp->edid = drm_do_get_edid(&dp->mhdp.connector.base,
--				   cdns_mhdp_get_edid_block, &dp->mhdp);
-+	dp->edid = drm_do_get_edid(&mhdp->connector.base,
-+				   cdns_mhdp_get_edid_block, mhdp);
- 	return 0;
- }
- 
-@@ -422,7 +424,8 @@ static int cdn_dp_enable_phy(struct cdn_
- 	}
- 
- 	port->lanes = cdn_dp_get_port_lanes(port);
--	ret = cdns_mhdp_set_host_cap(&dp->mhdp, port->lanes, property.intval);
-+	dp->mhdp.dp.link.num_lanes = port->lanes;
-+	ret = cdns_mhdp_set_host_cap(&dp->mhdp, property.intval);
- 	if (ret) {
- 		DRM_DEV_ERROR(dev, "set host capabilities failed: %d\n",
- 			      ret);
-@@ -577,9 +580,9 @@ static bool cdn_dp_check_link_status(str
- {
- 	u8 link_status[DP_LINK_STATUS_SIZE];
- 	struct cdn_dp_port *port = cdn_dp_connected_port(dp);
--	u8 sink_lanes = drm_dp_max_lane_count(dp->dpcd);
-+	u8 sink_lanes = dp->mhdp.dp.link.num_lanes;
- 
--	if (!port || !dp->mhdp.dp.link.rate || !dp->mhdp.dp.link.num_lanes)
-+	if (!port || !dp->mhdp.dp.link.rate || !sink_lanes)
- 		return false;
- 
- 	if (cdns_mhdp_dpcd_read(&dp->mhdp, DP_LANE0_1_STATUS, link_status,
---- a/drivers/gpu/drm/rockchip/cdn-dp-core.h
-+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.h
-@@ -61,7 +61,6 @@ struct cdn_dp_device {
- 	u8 lanes;
- 	int active_port;
- 
--	u8 dpcd[DP_RECEIVER_CAP_SIZE];
- 	bool sink_has_audio;
- };
- #endif  /* _CDN_DP_CORE_H */
---- a/include/drm/bridge/cdns-mhdp-common.h
-+++ b/include/drm/bridge/cdns-mhdp-common.h
-@@ -436,7 +436,7 @@
- #define HDCP_TX_IS_RECEIVER_ID_VALID_EVENT	BIT(7)
- 
- #define TU_SIZE					30
--#define CDNS_DP_MAX_LINK_RATE			DP_LINK_BW_5_4
-+#define CDNS_DP_MAX_LINK_RATE	540000
- 
- #define F_HDMI_ENCODING(x) (((x) & ((1 << 2) - 1)) << 16)
- #define F_VIF_DATA_WIDTH(x) (((x) & ((1 << 2) - 1)) << 2)
-@@ -697,8 +697,6 @@ struct cdns_mhdp_device {
- 			struct cdns_mhdp_mst_cbs cbs;
- 			bool is_mst;
- 			bool can_mst;
--			u32 link_rate;
--			u32 num_lanes;
- 		} dp;
- 		struct _hdmi_data {
- #ifdef CONFIG_DRM_CDNS_HDMI_CEC
-@@ -720,7 +718,7 @@ u32 cdns_mhdp_get_fw_clk(struct cdns_mhd
- int cdns_mhdp_load_firmware(struct cdns_mhdp_device *mhdp, const u32 *i_mem,
- 			    u32 i_size, const u32 *d_mem, u32 d_size);
- int cdns_mhdp_set_firmware_active(struct cdns_mhdp_device *mhdp, bool enable);
--int cdns_mhdp_set_host_cap(struct cdns_mhdp_device *mhdp, u8 lanes, bool flip);
-+int cdns_mhdp_set_host_cap(struct cdns_mhdp_device *mhdp, bool flip);
- int cdns_mhdp_event_config(struct cdns_mhdp_device *mhdp);
- u32 cdns_mhdp_get_event(struct cdns_mhdp_device *mhdp);
- int cdns_mhdp_get_hpd_status(struct cdns_mhdp_device *mhdp);
diff --git a/target/linux/layerscape/patches-5.4/805-display-0019-drm-imx-mhdp-add-dual-mode-support-for-imx8qm.patch b/target/linux/layerscape/patches-5.4/805-display-0019-drm-imx-mhdp-add-dual-mode-support-for-imx8qm.patch
deleted file mode 100644
index 689e573a9a..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0019-drm-imx-mhdp-add-dual-mode-support-for-imx8qm.patch
+++ /dev/null
@@ -1,192 +0,0 @@
-From 8e4cbfc8b1b86479a4bc64d6034449096d0af3a1 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Thu, 26 Sep 2019 17:00:26 +0800
-Subject: [PATCH] drm: imx: mhdp: add dual mode support for imx8qm
-
-Add dual mode support for imx8qm.
-imx8qm hdmi/dp driver are ready to support 4K.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c   |  4 ----
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c |  6 -----
- drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c           | 30 +++++++++++++++++++------
- drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c           |  3 +--
- drivers/gpu/drm/imx/cdns-mhdp-imx.h             | 14 +-----------
- 5 files changed, 25 insertions(+), 32 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -118,9 +118,6 @@ static void cdns_dp_mode_set(struct cdns
- 
- 	memcpy(&mhdp->mode, mode, sizeof(struct drm_display_mode));
- 
--	//Sandor TODO
--//	mhdp->dual_mode = video_is_dual_mode(mode);
--
- 	dp_pixel_clk_reset(mhdp);
- 
- 	cdns_mhdp_plat_call(mhdp, pclk_rate);
-@@ -450,7 +447,6 @@ static int __cdns_dp_probe(struct platfo
- 
- 	cdns_mhdp_plat_call(mhdp, power_on);
- 
--//	mhdp->dual_mode = false;
- 	cdns_mhdp_plat_call(mhdp, firmware_init);
- 
- 	/* DP FW alive check */
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -343,9 +343,6 @@ static void cdns_hdmi_bridge_mode_set(st
- 
- 	memcpy(&mhdp->mode, mode, sizeof(struct drm_display_mode));
- 
--	//Sandor TODO
--//	hdmi->dual_mode = video_is_dual_mode(mode);
--
- 	hdmi_lanes_config(mhdp);
- 
- 	cdns_mhdp_plat_call(mhdp, pclk_rate);
-@@ -446,9 +443,6 @@ static int __cdns_hdmi_probe(struct plat
- 		return -EPROBE_DEFER;
- 	}
- 
--	/* Initialize dual_mode to false */
--//	hdmi->dual_mode = false;
--
- 	cdns_mhdp_plat_call(mhdp, power_on);
- 
- 	/* Initialize FW */
---- a/drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c
-@@ -13,19 +13,32 @@
- 
- #include "cdns-mhdp-imx.h"
- 
-+#define PLL_800MHZ (800000000)
-+
-+#define HDP_DUAL_MODE_MIN_PCLK_RATE	300000	/* KHz */
-+#define HDP_SINGLE_MODE_MAX_WIDTH	1920
-+
- #define CSR_PIXEL_LINK_MUX_CTL		0x00
- #define CSR_PIXEL_LINK_MUX_VCP_OFFSET		5
- #define CSR_PIXEL_LINK_MUX_HCP_OFFSET		4
- 
--#define PLL_800MHZ (800000000)
-+static bool imx8qm_video_dual_mode(struct cdns_mhdp_device *mhdp)
-+{
-+	struct drm_display_mode *mode = &mhdp->mode;
-+	return (mode->clock > HDP_DUAL_MODE_MIN_PCLK_RATE ||
-+		mode->hdisplay > HDP_SINGLE_MODE_MAX_WIDTH) ? true : false;
-+}
- 
- static void imx8qm_pixel_link_mux(struct imx_mhdp_device *imx_mhdp)
- {
- 	struct drm_display_mode *mode = &imx_mhdp->mhdp.mode;
-+	bool dual_mode;
- 	u32 val;
- 
-+	dual_mode = imx8qm_video_dual_mode(&imx_mhdp->mhdp);
-+
- 	val = 0x4;	/* RGB */
--	if (imx_mhdp->dual_mode)
-+	if (dual_mode)
- 		val |= 0x2;	/* pixel link 0 and 1 are active */
- 	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
- 		val |= 1 << CSR_PIXEL_LINK_MUX_VCP_OFFSET;
-@@ -276,12 +289,13 @@ static void imx8qm_pixel_clk_disable(str
- 
- static void imx8qm_pixel_clk_set_rate(struct imx_mhdp_device *imx_mhdp, u32 pclock)
- {
-+	bool dual_mode = imx8qm_video_dual_mode(&imx_mhdp->mhdp);
- 	struct imx_hdp_clks *clks = &imx_mhdp->clks;
- 
- 	/* pixel clock for HDMI */
- 	clk_set_rate(clks->av_pll, pclock);
- 
--	if (imx_mhdp->dual_mode == true) {
-+	if (dual_mode == true) {
- 		clk_set_rate(clks->clk_pxl, pclock/2);
- 		clk_set_rate(clks->clk_pxl_link, pclock/2);
- 	} else {
-@@ -471,18 +485,20 @@ void cdns_mhdp_plat_init_imx8qm(struct c
- {
- 	struct imx_mhdp_device *imx_mhdp =
- 				container_of(mhdp, struct imx_mhdp_device, mhdp);
-+	bool dual_mode = imx8qm_video_dual_mode(&imx_mhdp->mhdp);
- 
--	imx8qm_pixel_link_sync_disable(imx_mhdp->dual_mode);
--	imx8qm_pixel_link_invalid(imx_mhdp->dual_mode);
-+	imx8qm_pixel_link_sync_disable(dual_mode);
-+	imx8qm_pixel_link_invalid(dual_mode);
- }
- 
- void cdns_mhdp_plat_deinit_imx8qm(struct cdns_mhdp_device *mhdp)
- {
- 	struct imx_mhdp_device *imx_mhdp =
- 				container_of(mhdp, struct imx_mhdp_device, mhdp);
-+	bool dual_mode = imx8qm_video_dual_mode(&imx_mhdp->mhdp);
- 
--	imx8qm_pixel_link_valid(imx_mhdp->dual_mode);
--	imx8qm_pixel_link_sync_enable(imx_mhdp->dual_mode);
-+	imx8qm_pixel_link_valid(dual_mode);
-+	imx8qm_pixel_link_sync_enable(dual_mode);
- }
- 
- void cdns_mhdp_pclk_rate_imx8qm(struct cdns_mhdp_device *mhdp)
---- a/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
-@@ -172,7 +172,6 @@ static int cdns_mhdp_imx_bind(struct dev
- 	if (ret < 0)
- 		drm_encoder_cleanup(encoder);
- 
--	imx_mhdp->dual_mode = false;
- 	return ret;
- }
- 
-@@ -205,7 +204,7 @@ static struct platform_driver cdns_mhdp_
- 	.probe  = cdns_mhdp_imx_probe,
- 	.remove = cdns_mhdp_imx_remove,
- 	.driver = {
--		.name = "cdn-hdp-imx8qm",
-+		.name = "cdns-mhdp-imx",
- 		.of_match_table = cdns_mhdp_imx_dt_ids,
- 	},
- };
---- a/drivers/gpu/drm/imx/cdns-mhdp-imx.h
-+++ b/drivers/gpu/drm/imx/cdns-mhdp-imx.h
-@@ -16,15 +16,6 @@
- #include <drm/drm_encoder_slave.h>
- 
- 
--#define HDP_DUAL_MODE_MIN_PCLK_RATE	300000	/* KHz */
--#define HDP_SINGLE_MODE_MAX_WIDTH	1920
--
--static inline bool video_is_dual_mode(const struct drm_display_mode *mode)
--{
--	return (mode->clock > HDP_DUAL_MODE_MIN_PCLK_RATE ||
--		mode->hdisplay > HDP_SINGLE_MODE_MAX_WIDTH) ? true : false;
--}
--
- struct imx_mhdp_device;
- 
- struct imx_hdp_clks {
-@@ -62,17 +53,14 @@ struct imx_mhdp_device {
- 
- 	int bus_type;
- 
--	u32 dual_mode;
--
- 	struct device		*pd_mhdp_dev;
- 	struct device		*pd_pll0_dev;
- 	struct device		*pd_pll1_dev;
- 	struct device_link	*pd_mhdp_link;
- 	struct device_link	*pd_pll0_link;
- 	struct device_link	*pd_pll1_link;
--
--//	u32 phy_init;
- };
-+
- void cdns_mhdp_plat_init_imx8qm(struct cdns_mhdp_device *mhdp);
- void cdns_mhdp_plat_deinit_imx8qm(struct cdns_mhdp_device *mhdp);
- void cdns_mhdp_pclk_rate_imx8qm(struct cdns_mhdp_device *mhdp);
diff --git a/target/linux/layerscape/patches-5.4/805-display-0020-drm-bridge-cdns-cec-fix-LA-failed-set-issue.patch b/target/linux/layerscape/patches-5.4/805-display-0020-drm-bridge-cdns-cec-fix-LA-failed-set-issue.patch
deleted file mode 100644
index ec36c571da..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0020-drm-bridge-cdns-cec-fix-LA-failed-set-issue.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From 4e8d26c363c6e4b8b89d21feeb8c6dc57085b27d Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Fri, 27 Sep 2019 17:15:34 +0800
-Subject: [PATCH] drm: bridge: cdns cec: fix LA failed set issue
-
-improved function set_logical_addr() function.
-Fix LA set failed issue in some case.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/Kconfig         |  6 ++++
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-cec.c | 38 +++++++++++---------------
- 2 files changed, 22 insertions(+), 22 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/Kconfig
-+++ b/drivers/gpu/drm/bridge/cadence/Kconfig
-@@ -8,12 +8,18 @@ config DRM_CDNS_MHDP
- 
- config DRM_CDNS_HDMI
- 	tristate "Cadence HDMI DRM driver"
-+	depends on DRM_CDNS_MHDP
- 
- config DRM_CDNS_DP
- 	tristate "Cadence DP DRM driver"
-+	depends on DRM_CDNS_MHDP
- 
- config DRM_CDNS_AUDIO
- 	tristate "Cadence MHDP Audio driver"
-+	depends on DRM_CDNS_MHDP
- 
- config DRM_CDNS_HDMI_CEC
- 	tristate "Cadence MHDP HDMI CEC driver"
-+	depends on DRM_CDNS_HDMI
-+	select CEC_CORE
-+	select CEC_NOTIFIER
---- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp-cec.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-cec.c
-@@ -20,8 +20,6 @@
- #define CEC_NAME	"cdns-mhdp-cec"
- 
- #define REG_ADDR_OFF 4
--#define MAX_LA_IDX 4
--#define MAX_LA_VAL 15
- 
- /* regsiter define */
- #define TX_MSG_HEADER 0x33800
-@@ -158,26 +156,22 @@ static u32 mhdp_cec_write_message(struct
- 	return true;
- }
- 
--//static void cec_abort_tx_transfer(struct cdns_mhdp_cec *cec)
--//{
--//	cec_write(cec, TX_MSG_CMD, CEC_TX_ABORT);
--//	cec_write(cec, TX_MSG_CMD, CEC_TX_STOP);
--//}
--
- static int mhdp_cec_set_logical_addr(struct cdns_mhdp_cec *cec, u32 la)
- {
--	u8 i;
- 	u8 la_reg;
-+	u8 i;
- 
--	if (la >= MAX_LA_VAL) {
--		dev_err(cec->dev, "Error logical Addr\n");
--		return -EINVAL;
--	}
--
--	for (i = 0; i < MAX_LA_IDX; ++i) {
--		la_reg =
--		    mhdp_cec_read(cec, LOGICAL_ADDRESS_LA0 + (i * REG_ADDR_OFF));
-+	if (la == CEC_LOG_ADDR_INVALID)
-+		/* invalid all LA address */
-+		for (i = 0; i < CEC_MAX_LOG_ADDRS; ++i) {
-+			mhdp_cec_write(cec, LOGICAL_ADDRESS_LA0 + (i * REG_ADDR_OFF), 0);
-+			return 0;
-+		}
- 
-+	/* In fact cdns mhdp cec could support max 5 La address */
-+	for (i = 0; i < CEC_MAX_LOG_ADDRS; ++i) {
-+		la_reg = mhdp_cec_read(cec, LOGICAL_ADDRESS_LA0 + (i * REG_ADDR_OFF));
-+		/* Check LA already used */
- 		if (la_reg & 0x10)
- 			continue;
- 
-@@ -194,7 +188,7 @@ static int mhdp_cec_set_logical_addr(str
- 
- 	dev_warn(cec->dev, "All LA in use\n");
- 
--	return -EINVAL;
-+	return -ENXIO;
- }
- 
- static int mhdp_cec_poll_worker(void *_cec)
-@@ -263,7 +257,7 @@ static int mhdp_cec_poll_worker(void *_c
- 
- static int mhdp_cec_adap_enable(struct cec_adapter *adap, bool enable)
- {
--	struct cdns_mhdp_cec *cec = adap->priv;
-+	struct cdns_mhdp_cec *cec = cec_get_drvdata(adap);
- 
- 	if (enable) {
- 		mhdp_cec_write(cec, DB_L_TIMER, 0x10);
-@@ -276,7 +270,7 @@ static int mhdp_cec_adap_enable(struct c
- 
- static int mhdp_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
- {
--	struct cdns_mhdp_cec *cec = adap->priv;
-+	struct cdns_mhdp_cec *cec = cec_get_drvdata(adap);
- 
- 	return mhdp_cec_set_logical_addr(cec, addr);
- }
-@@ -284,7 +278,7 @@ static int mhdp_cec_adap_log_addr(struct
- static int mhdp_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
- 				 u32 signal_free_time, struct cec_msg *msg)
- {
--	struct cdns_mhdp_cec *cec = adap->priv;
-+	struct cdns_mhdp_cec *cec = cec_get_drvdata(adap);
- 
- 	mhdp_cec_write_message(cec, msg);
- 
-@@ -307,7 +301,7 @@ int cdns_mhdp_register_cec_driver(struct
- 					 CEC_NAME,
- 					 CEC_CAP_PHYS_ADDR | CEC_CAP_LOG_ADDRS |
- 					 CEC_CAP_TRANSMIT | CEC_CAP_PASSTHROUGH
--					 | CEC_CAP_RC, 1);
-+					 | CEC_CAP_RC, CEC_MAX_LOG_ADDRS);
- 	ret = PTR_ERR_OR_ZERO(cec->adap);
- 	if (ret)
- 		return ret;
diff --git a/target/linux/layerscape/patches-5.4/805-display-0021-DRM-mhdp-HDMI-skip-scdc-write-return-check.patch b/target/linux/layerscape/patches-5.4/805-display-0021-DRM-mhdp-HDMI-skip-scdc-write-return-check.patch
deleted file mode 100644
index a41beea29e..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0021-DRM-mhdp-HDMI-skip-scdc-write-return-check.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 74c383e7da3e20c201e3b0c847a3d2f6fa0dbdc6 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Sun, 29 Sep 2019 14:48:28 +0800
-Subject: [PATCH] DRM: mhdp: HDMI: skip scdc write return check
-
-HDMI sink that only support HDMI1.4 is not support
-SCDC read/write. Skip the SCDC write check and continue
-HDMI initialize process.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -173,10 +173,8 @@ void cdns_hdmi_mode_set(struct cdns_mhdp
- 	int ret;
- 
- 	ret = hdmi_sink_config(mhdp);
--	if (ret < 0) {
--		DRM_ERROR("%s failed\n", __func__);
--		return;
--	}
-+	if (ret < 0)
-+		DRM_DEBUG("%s failed\n", __func__);
- 
- 	ret = cdns_hdmi_ctrl_init(mhdp, mhdp->hdmi.hdmi_type, mhdp->hdmi.char_rate);
- 	if (ret < 0) {
diff --git a/target/linux/layerscape/patches-5.4/805-display-0022-drm-mhdp-add-mutex-lock-to-mhdp-register-access-func.patch b/target/linux/layerscape/patches-5.4/805-display-0022-drm-mhdp-add-mutex-lock-to-mhdp-register-access-func.patch
deleted file mode 100644
index 0fc3d13758..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0022-drm-mhdp-add-mutex-lock-to-mhdp-register-access-func.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From ef8be75663178c0720d0944d9305f624776fc91c Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Thu, 17 Oct 2019 16:29:49 +0800
-Subject: [PATCH] drm: mhdp: add mutex lock to mhdp register access function
-
-Add muxtex lock to mhdp registers access functions
-that could avoid race condition between cec thread and hdmi video.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c     | 1 +
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c   | 1 +
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c | 8 ++++++++
- include/drm/bridge/cdns-mhdp-common.h             | 1 +
- 4 files changed, 11 insertions(+)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -410,6 +410,7 @@ static int __cdns_dp_probe(struct platfo
- 	int ret;
- 
- 	mutex_init(&mhdp->lock);
-+	mutex_init(&mhdp->iolock);
- 
- 	INIT_DELAYED_WORK(&mhdp->hotplug_work, hotplug_work_func);
- 
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -411,6 +411,7 @@ static int __cdns_hdmi_probe(struct plat
- 	int ret;
- 
- 	mutex_init(&mhdp->lock);
-+	mutex_init(&mhdp->iolock);
- 
- 	INIT_DELAYED_WORK(&mhdp->hotplug_work, hotplug_work_func);
- 
---- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
-@@ -75,6 +75,8 @@ u32 cdns_mhdp_bus_read(struct cdns_mhdp_
- {
- 	u32 val;
- 
-+	mutex_lock(&mhdp->iolock);
-+
- 	if (mhdp->bus_type == BUS_TYPE_LOW4K_SAPB) {
- 		/* Remap address to low 4K SAPB bus */
- 		writel(offset >> 12, mhdp->regs_sec + 0xc);
-@@ -88,12 +90,16 @@ u32 cdns_mhdp_bus_read(struct cdns_mhdp_
- 	else
- 		val = readl(mhdp->regs_base + offset);
- 
-+	mutex_unlock(&mhdp->iolock);
-+
- 	return val;
- }
- EXPORT_SYMBOL(cdns_mhdp_bus_read);
- 
- void cdns_mhdp_bus_write(u32 val, struct cdns_mhdp_device *mhdp, u32 offset)
- {
-+	mutex_lock(&mhdp->iolock);
-+
- 	if (mhdp->bus_type == BUS_TYPE_LOW4K_SAPB) {
- 		/* Remap address to low 4K SAPB bus */
- 		writel(offset >> 12, mhdp->regs_sec + 0xc);
-@@ -106,6 +112,8 @@ void cdns_mhdp_bus_write(u32 val, struct
- 		writel(val, mhdp->regs_sec + offset);
- 	else
- 		writel(val, mhdp->regs_base + offset);
-+
-+	mutex_unlock(&mhdp->iolock);
- }
- EXPORT_SYMBOL(cdns_mhdp_bus_write);
- 
---- a/include/drm/bridge/cdns-mhdp-common.h
-+++ b/include/drm/bridge/cdns-mhdp-common.h
-@@ -685,6 +685,7 @@ struct cdns_mhdp_device {
- 	bool plugged;
- 	bool is_hpd;
- 	struct mutex lock;
-+	struct mutex iolock;
- 
- 	int irq[IRQ_NUM];
- 
diff --git a/target/linux/layerscape/patches-5.4/805-display-0023-drm-mhdp-reset-video-mode-after-hdmi-dp-cable-plugin.patch b/target/linux/layerscape/patches-5.4/805-display-0023-drm-mhdp-reset-video-mode-after-hdmi-dp-cable-plugin.patch
deleted file mode 100644
index 9e90f7d73c..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0023-drm-mhdp-reset-video-mode-after-hdmi-dp-cable-plugin.patch
+++ /dev/null
@@ -1,236 +0,0 @@
-From 9ff3c9d6063c6464e243b85bbbbd03e2096a57c0 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Mon, 28 Oct 2019 17:07:06 +0800
-Subject: [PATCH] drm: mhdp: reset video mode after hdmi/dp cable plugin
-
-DP need setup link training, and HDMI need reset hdmi sink SCDC
-status after cable reconnected.
-Add video mode_set function when cable plugin.
-Add 20ms/50ms delay for hdmi/dp to waite FW stable.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c   | 20 ++++----
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c | 63 ++++++++++++-------------
- 2 files changed, 43 insertions(+), 40 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -108,19 +108,19 @@ static void dp_pixel_clk_reset(struct cd
- 	cdns_mhdp_reg_write(mhdp, SOURCE_HDTX_CAR, val);
- }
- 
--static void cdns_dp_mode_set(struct cdns_mhdp_device *mhdp,
--			const struct drm_display_mode *mode)
-+static void cdns_dp_mode_set(struct cdns_mhdp_device *mhdp)
- {
- 	u32 lane_mapping = mhdp->lane_mapping;
- 	struct drm_dp_link *link = &mhdp->dp.link;
- 	char linkid[6];
- 	int ret;
- 
--	memcpy(&mhdp->mode, mode, sizeof(struct drm_display_mode));
-+	cdns_mhdp_plat_call(mhdp, pclk_rate);
- 
--	dp_pixel_clk_reset(mhdp);
-+	/* delay for DP FW stable after pixel clock relock */
-+	msleep(50);
- 
--	cdns_mhdp_plat_call(mhdp, pclk_rate);
-+	dp_pixel_clk_reset(mhdp);
- 
- 	ret = drm_dp_downstream_id(&mhdp->dp.aux, linkid);
- 	if (ret < 0) {
-@@ -330,11 +330,10 @@ static void cdns_dp_bridge_mode_set(stru
- 	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
- 
- 	DRM_INFO("Mode: %dx%dp%d\n", mode->hdisplay, mode->vdisplay, mode->clock); 
-+	memcpy(&mhdp->mode, mode, sizeof(struct drm_display_mode));
- 
- 	mutex_lock(&mhdp->lock);
--
--	cdns_dp_mode_set(mhdp, mode);
--
-+	cdns_dp_mode_set(mhdp);
- 	mutex_unlock(&mhdp->lock);
- }
- 
-@@ -367,6 +366,11 @@ static void hotplug_work_func(struct wor
- 	drm_helper_hpd_irq_event(connector->dev);
- 
- 	if (connector->status == connector_status_connected) {
-+		/* reset video mode after cable plugin */
-+		mutex_lock(&mhdp->lock);
-+		cdns_dp_mode_set(mhdp);
-+		mutex_unlock(&mhdp->lock);
-+
- 		DRM_INFO("HDMI/DP Cable Plug In\n");
- 		enable_irq(mhdp->irq[IRQ_OUT]);
- 	} else if (connector->status == connector_status_disconnected) {
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -11,11 +11,11 @@
-  */
- #include <drm/bridge/cdns-mhdp-common.h>
- #include <drm/drm_atomic_helper.h>
--#include <drm/drm_crtc_helper.h>
- #include <drm/drm_edid.h>
- #include <drm/drm_encoder_slave.h>
- #include <drm/drm_of.h>
- #include <drm/drm_probe_helper.h>
-+#include <drm/drm_scdc_helper.h>
- #include <drm/drmP.h>
- #include <linux/delay.h>
- #include <linux/err.h>
-@@ -26,25 +26,30 @@
- #include <linux/mutex.h>
- #include <linux/of_device.h>
- 
--static int hdmi_sink_config(struct cdns_mhdp_device *mhdp)
-+static void hdmi_sink_config(struct cdns_mhdp_device *mhdp)
- {
- 	struct drm_scdc *scdc = &mhdp->connector.base.display_info.hdmi.scdc;
- 	u8 buff;
--	int ret;
-+
-+	/* check sink support SCDC or not */
-+	if (scdc->supported != true) {
-+		DRM_INFO("Sink Not Support SCDC\n");
-+		return;
-+	}
- 
- 	if (mhdp->hdmi.char_rate > 340000) {
- 		/*
- 		 * TMDS Character Rate above 340MHz should working in HDMI2.0
- 		 * Enable scrambling and TMDS_Bit_Clock_Ratio
- 		 */
--		buff = 3;
-+		buff = SCDC_TMDS_BIT_CLOCK_RATIO_BY_40 | SCDC_SCRAMBLING_ENABLE;
- 		mhdp->hdmi.hdmi_type = MODE_HDMI_2_0;
- 	} else  if (scdc->scrambling.low_rates) {
- 		/*
- 		 * Enable scrambling and HDMI2.0 when scrambling capability of sink
- 		 * be indicated in the HF-VSDB LTE_340Mcsc_scramble bit
- 		 */
--		buff = 1;
-+		buff = SCDC_SCRAMBLING_ENABLE;
- 		mhdp->hdmi.hdmi_type = MODE_HDMI_2_0;
- 	} else {
- 		/* Default work in HDMI1.4 */
-@@ -53,8 +58,7 @@ static int hdmi_sink_config(struct cdns_
- 	 }
- 
- 	/* TMDS config */
--	ret = cdns_hdmi_scdc_write(mhdp, 0x20, buff);
--	return ret;
-+	cdns_hdmi_scdc_write(mhdp, 0x20, buff);
- }
- 
- static void hdmi_lanes_config(struct cdns_mhdp_device *mhdp)
-@@ -142,7 +146,7 @@ static int hdmi_avi_info_set(struct cdns
- 	return 0;
- }
- 
--static int hdmi_vendor_info_set(struct cdns_mhdp_device *mhdp,
-+static void hdmi_vendor_info_set(struct cdns_mhdp_device *mhdp,
- 				struct drm_display_mode *mode)
- {
- 	struct hdmi_vendor_infoframe frame;
-@@ -152,19 +156,18 @@ static int hdmi_vendor_info_set(struct c
- 	/* Initialise vendor frame from DRM mode */
- 	ret = drm_hdmi_vendor_infoframe_from_display_mode(&frame, &mhdp->connector.base, mode);
- 	if (ret < 0) {
--		DRM_WARN("Unable to init vendor infoframe: %d\n", ret);
--		return -1;
-+		DRM_INFO("No vendor infoframe\n");
-+		return;
- 	}
- 
- 	ret = hdmi_vendor_infoframe_pack(&frame, buf + 1, sizeof(buf) - 1);
- 	if (ret < 0) {
- 		DRM_WARN("Unable to pack vendor infoframe: %d\n", ret);
--		return -1;
-+		return;
- 	}
- 
- 	buf[0] = 0;
- 	cdns_mhdp_infoframe_set(mhdp, 3, sizeof(buf), buf, HDMI_INFOFRAME_TYPE_VENDOR);
--	return 0;
- }
- 
- void cdns_hdmi_mode_set(struct cdns_mhdp_device *mhdp)
-@@ -172,9 +175,16 @@ void cdns_hdmi_mode_set(struct cdns_mhdp
- 	struct drm_display_mode *mode = &mhdp->mode;
- 	int ret;
- 
--	ret = hdmi_sink_config(mhdp);
--	if (ret < 0)
--		DRM_DEBUG("%s failed\n", __func__);
-+	hdmi_lanes_config(mhdp);
-+
-+	cdns_mhdp_plat_call(mhdp, pclk_rate);
-+
-+	/* delay for HDMI FW stable after pixel clock relock */
-+	msleep(20);
-+
-+	cdns_mhdp_plat_call(mhdp, phy_set);
-+
-+	hdmi_sink_config(mhdp);
- 
- 	ret = cdns_hdmi_ctrl_init(mhdp, mhdp->hdmi.hdmi_type, mhdp->hdmi.char_rate);
- 	if (ret < 0) {
-@@ -195,18 +205,13 @@ void cdns_hdmi_mode_set(struct cdns_mhdp
- 	}
- 
- 	/* vendor info frame is enable only  when HDMI1.4 4K mode */
--	ret = hdmi_vendor_info_set(mhdp, mode);
--	if (ret < 0)
--		DRM_WARN("Unable to configure Vendor infoframe\n");
-+	hdmi_vendor_info_set(mhdp, mode);
- 
- 	ret = cdns_hdmi_mode_config(mhdp, mode, &mhdp->video_info);
- 	if (ret < 0) {
- 		DRM_ERROR("CDN_API_HDMITX_SetVic_blocking ret = %d\n", ret);
- 		return;
- 	}
--
--	/* wait HDMI PHY pixel clock stable */
--	msleep(50);
- }
- 
- static enum drm_connector_status
-@@ -335,20 +340,11 @@ static void cdns_hdmi_bridge_mode_set(st
- 	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
- 	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
- 
--	mutex_lock(&mhdp->lock);
--
- 	DRM_INFO("Mode: %dx%dp%d\n", mode->hdisplay, mode->vdisplay, mode->clock); 
--
- 	memcpy(&mhdp->mode, mode, sizeof(struct drm_display_mode));
- 
--	hdmi_lanes_config(mhdp);
--
--	cdns_mhdp_plat_call(mhdp, pclk_rate);
--
--	cdns_mhdp_plat_call(mhdp, phy_set);
--
-+	mutex_lock(&mhdp->lock);
- 	cdns_hdmi_mode_set(mhdp);
--
- 	mutex_unlock(&mhdp->lock);
- }
- 
-@@ -367,8 +363,11 @@ static void hotplug_work_func(struct wor
- 	drm_helper_hpd_irq_event(connector->dev);
- 
- 	if (connector->status == connector_status_connected) {
--		/* Cable Connected */
- 		DRM_INFO("HDMI Cable Plug In\n");
-+		/* reset video mode after cable plugin */
-+		mutex_lock(&mhdp->lock);
-+		cdns_hdmi_mode_set(mhdp);
-+		mutex_unlock(&mhdp->lock);
- 		enable_irq(mhdp->irq[IRQ_OUT]);
- 	} else if (connector->status == connector_status_disconnected) {
- 		/* Cable Disconnedted  */
diff --git a/target/linux/layerscape/patches-5.4/805-display-0024-drm-bridge-cadence-hdmi-remove-video-mode-limition.patch b/target/linux/layerscape/patches-5.4/805-display-0024-drm-bridge-cadence-hdmi-remove-video-mode-limition.patch
deleted file mode 100644
index 1e06680187..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0024-drm-bridge-cadence-hdmi-remove-video-mode-limition.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From e3ebc237397387251828e52f4c21509d977e7797 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Wed, 13 Nov 2019 16:47:47 +0800
-Subject: [PATCH] drm: bridge: cadence: hdmi: remove video mode limition
-
-combine mode is supported by imx8qm DPU.
-imx8qm HDMI could support full feature.
-Remove the 1080p60 limition.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -305,8 +305,8 @@ cdns_hdmi_bridge_mode_valid(struct drm_b
- 			mode->flags & DRM_MODE_FLAG_INTERLACE)
- 		return MODE_BAD;
- 
--	/* MAX support pixel clock rate 148.5MHz */
--	if (mode->clock > 148500)
-+	/* MAX support pixel clock rate 594MHz */
-+	if (mode->clock > 594000)
- 		return MODE_CLOCK_HIGH;
- 
- 	/* 4096x2160 is not supported */
diff --git a/target/linux/layerscape/patches-5.4/805-display-0025-drm-imx-hdp-add-hdr10-metadata-property.patch b/target/linux/layerscape/patches-5.4/805-display-0025-drm-imx-hdp-add-hdr10-metadata-property.patch
deleted file mode 100644
index 6ce4263a3f..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0025-drm-imx-hdp-add-hdr10-metadata-property.patch
+++ /dev/null
@@ -1,173 +0,0 @@
-From 7c5c4f891ce4746b52d95d9340c7cae063a48350 Mon Sep 17 00:00:00 2001
-From: Laurentiu Palcu <laurentiu.palcu@nxp.com>
-Date: Mon, 4 Nov 2019 13:18:48 +0200
-Subject: [PATCH] drm/imx/hdp: add hdr10 metadata property
-
-The HDR_OUTPUT_METADATA property is needed in order for userspace to instruct
-the sink to switch to HDR10 mode.
-
-Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c | 72 +++++++++++++++++++++++++
- drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c           |  4 ++
- include/drm/bridge/cdns-mhdp-common.h           |  1 +
- 3 files changed, 77 insertions(+)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -170,6 +170,35 @@ static void hdmi_vendor_info_set(struct
- 	cdns_mhdp_infoframe_set(mhdp, 3, sizeof(buf), buf, HDMI_INFOFRAME_TYPE_VENDOR);
- }
- 
-+static void hdmi_drm_info_set(struct cdns_mhdp_device *mhdp)
-+{
-+	struct drm_connector_state *conn_state;
-+	struct hdmi_drm_infoframe frame;
-+	u8 buf[32];
-+	int ret;
-+
-+	conn_state = mhdp->connector.base.state;
-+
-+	if (!conn_state->hdr_output_metadata)
-+		return;
-+
-+	ret = drm_hdmi_infoframe_set_hdr_metadata(&frame, conn_state);
-+	if (ret < 0) {
-+		DRM_DEBUG_KMS("couldn't set HDR metadata in infoframe\n");
-+		return;
-+	}
-+
-+	ret = hdmi_drm_infoframe_pack(&frame, buf + 1, sizeof(buf) - 1);
-+	if (ret < 0) {
-+		DRM_DEBUG_KMS("couldn't pack HDR infoframe\n");
-+		return;
-+	}
-+
-+	buf[0] = 0;
-+	cdns_mhdp_infoframe_set(mhdp, 3, sizeof(buf),
-+				buf, HDMI_INFOFRAME_TYPE_DRM);
-+}
-+
- void cdns_hdmi_mode_set(struct cdns_mhdp_device *mhdp)
- {
- 	struct drm_display_mode *mode = &mhdp->mode;
-@@ -207,6 +236,8 @@ void cdns_hdmi_mode_set(struct cdns_mhdp
- 	/* vendor info frame is enable only  when HDMI1.4 4K mode */
- 	hdmi_vendor_info_set(mhdp, mode);
- 
-+	hdmi_drm_info_set(mhdp);
-+
- 	ret = cdns_hdmi_mode_config(mhdp, mode, &mhdp->video_info);
- 	if (ret < 0) {
- 		DRM_ERROR("CDN_API_HDMITX_SetVic_blocking ret = %d\n", ret);
-@@ -262,6 +293,40 @@ static int cdns_hdmi_connector_get_modes
- 	return num_modes;
- }
- 
-+static bool blob_equal(const struct drm_property_blob *a,
-+		       const struct drm_property_blob *b)
-+{
-+	if (a && b)
-+		return a->length == b->length &&
-+			!memcmp(a->data, b->data, a->length);
-+
-+	return !a == !b;
-+}
-+
-+static int cdns_hdmi_connector_atomic_check(struct drm_connector *connector,
-+					    struct drm_atomic_state *state)
-+{
-+	struct drm_connector_state *new_con_state =
-+		drm_atomic_get_new_connector_state(state, connector);
-+	struct drm_connector_state *old_con_state =
-+		drm_atomic_get_old_connector_state(state, connector);
-+	struct drm_crtc *crtc = new_con_state->crtc;
-+	struct drm_crtc_state *new_crtc_state;
-+
-+	if (!blob_equal(new_con_state->hdr_output_metadata,
-+			old_con_state->hdr_output_metadata)) {
-+		new_crtc_state = drm_atomic_get_crtc_state(state, crtc);
-+		if (IS_ERR(new_crtc_state))
-+			return PTR_ERR(new_crtc_state);
-+
-+		new_crtc_state->mode_changed =
-+			!new_con_state->hdr_output_metadata ||
-+			!old_con_state->hdr_output_metadata;
-+	}
-+
-+	return 0;
-+}
-+
- static const struct drm_connector_funcs cdns_hdmi_connector_funcs = {
- 	.fill_modes = drm_helper_probe_single_connector_modes,
- 	.detect = cdns_hdmi_connector_detect,
-@@ -273,11 +338,13 @@ static const struct drm_connector_funcs
- 
- static const struct drm_connector_helper_funcs cdns_hdmi_connector_helper_funcs = {
- 	.get_modes = cdns_hdmi_connector_get_modes,
-+	.atomic_check = cdns_hdmi_connector_atomic_check,
- };
- 
- static int cdns_hdmi_bridge_attach(struct drm_bridge *bridge)
- {
- 	struct cdns_mhdp_device *mhdp = bridge->driver_private;
-+	struct drm_mode_config *config = &bridge->dev->mode_config;
- 	struct drm_encoder *encoder = bridge->encoder;
- 	struct drm_connector *connector = &mhdp->connector.base;
- 
-@@ -289,6 +356,11 @@ static int cdns_hdmi_bridge_attach(struc
- 	drm_connector_init(bridge->dev, connector, &cdns_hdmi_connector_funcs,
- 			   DRM_MODE_CONNECTOR_HDMIA);
- 
-+	if (!strncmp("imx8mq-hdmi", mhdp->plat_data->plat_name, 11))
-+		drm_object_attach_property(&connector->base,
-+					   config->hdr_output_metadata_property,
-+					   0);
-+
- 	drm_connector_attach_encoder(connector, encoder);
- 
- 	return 0;
---- a/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
-@@ -54,6 +54,7 @@ static const struct drm_encoder_funcs cd
- };
- 
- static struct cdns_plat_data imx8mq_hdmi_drv_data = {
-+	.plat_name = "imx8mq-hdmi",
- 	.bind	= cdns_hdmi_bind,
- 	.unbind	= cdns_hdmi_unbind,
- 	.phy_set = cdns_hdmi_phy_set_imx8mq,
-@@ -61,6 +62,7 @@ static struct cdns_plat_data imx8mq_hdmi
- };
- 
- static struct cdns_plat_data imx8mq_dp_drv_data = {
-+	.plat_name = "imx8mq-dp",
- 	.bind	= cdns_dp_bind,
- 	.unbind	= cdns_dp_unbind,
- 	.phy_set = cdns_dp_phy_set_imx8mq,
-@@ -68,6 +70,7 @@ static struct cdns_plat_data imx8mq_dp_d
- };
- 
- static struct cdns_plat_data imx8qm_hdmi_drv_data = {
-+	.plat_name = "imx8qm-hdmi",
- 	.bind	= cdns_hdmi_bind,
- 	.unbind	= cdns_hdmi_unbind,
- 	.phy_set = cdns_hdmi_phy_set_imx8qm,
-@@ -81,6 +84,7 @@ static struct cdns_plat_data imx8qm_hdmi
- };
- 
- static struct cdns_plat_data imx8qm_dp_drv_data = {
-+	.plat_name = "imx8qm-dp",
- 	.bind	= cdns_dp_bind,
- 	.unbind	= cdns_dp_unbind,
- 	.phy_set = cdns_dp_phy_set_imx8qm,
---- a/include/drm/bridge/cdns-mhdp-common.h
-+++ b/include/drm/bridge/cdns-mhdp-common.h
-@@ -652,6 +652,7 @@ struct cdns_plat_data {
- 	int bus_type;
- 	int video_format;
- 	char is_dp;
-+	char *plat_name;
- };
- 
- struct cdns_mhdp_device {
diff --git a/target/linux/layerscape/patches-5.4/805-display-0026-drm-imx-hdp-add-colorspace-property.patch b/target/linux/layerscape/patches-5.4/805-display-0026-drm-imx-hdp-add-colorspace-property.patch
deleted file mode 100644
index 40d956ccc3..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0026-drm-imx-hdp-add-colorspace-property.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 55ebf12c54a53319d6a890eb499b68565242c3c4 Mon Sep 17 00:00:00 2001
-From: Laurentiu Palcu <laurentiu.palcu@nxp.com>
-Date: Thu, 7 Nov 2019 15:09:11 +0200
-Subject: [PATCH] drm/imx/hdp: add colorspace property
-
-iMX8MQ has the ability to adjust the DCSS output pipe gamut and nonlinearity
-depending on the HDMI connector capability. Userspace can explicitly set this
-property if it decides, based on EDID parsing, that the sink supports REC.2020
-and it wants to switch when it plays HDR10 content.
-
-Otherwise, the kernel will use the default settings specified in the HDMI
-specifications.
-
-Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -356,11 +356,17 @@ static int cdns_hdmi_bridge_attach(struc
- 	drm_connector_init(bridge->dev, connector, &cdns_hdmi_connector_funcs,
- 			   DRM_MODE_CONNECTOR_HDMIA);
- 
--	if (!strncmp("imx8mq-hdmi", mhdp->plat_data->plat_name, 11))
-+	if (!strncmp("imx8mq-hdmi", mhdp->plat_data->plat_name, 11)) {
- 		drm_object_attach_property(&connector->base,
- 					   config->hdr_output_metadata_property,
- 					   0);
- 
-+		if (!drm_mode_create_colorspace_property(connector))
-+			drm_object_attach_property(&connector->base,
-+						connector->colorspace_property,
-+						0);
-+	}
-+
- 	drm_connector_attach_encoder(connector, encoder);
- 
- 	return 0;
diff --git a/target/linux/layerscape/patches-5.4/805-display-0027-drm-imx-hdp-force-a-mode-set-when-colorspace-is-chan.patch b/target/linux/layerscape/patches-5.4/805-display-0027-drm-imx-hdp-force-a-mode-set-when-colorspace-is-chan.patch
deleted file mode 100644
index c63ae91683..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0027-drm-imx-hdp-force-a-mode-set-when-colorspace-is-chan.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From da02a33c186db04986166659caafb0c2da5bf7f0 Mon Sep 17 00:00:00 2001
-From: Laurentiu Palcu <laurentiu.palcu@nxp.com>
-Date: Fri, 15 Nov 2019 10:00:55 +0200
-Subject: [PATCH] drm/imx/hdp: force a mode set when colorspace is changed
-
-If the userspace changes the connector Colorspace property, we need to force a
-modeset, so that the entire pipeline is properly configured.
-
-Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -314,14 +314,16 @@ static int cdns_hdmi_connector_atomic_ch
- 	struct drm_crtc_state *new_crtc_state;
- 
- 	if (!blob_equal(new_con_state->hdr_output_metadata,
--			old_con_state->hdr_output_metadata)) {
-+			old_con_state->hdr_output_metadata) ||
-+	    new_con_state->colorspace != old_con_state->colorspace) {
- 		new_crtc_state = drm_atomic_get_crtc_state(state, crtc);
- 		if (IS_ERR(new_crtc_state))
- 			return PTR_ERR(new_crtc_state);
- 
- 		new_crtc_state->mode_changed =
- 			!new_con_state->hdr_output_metadata ||
--			!old_con_state->hdr_output_metadata;
-+			!old_con_state->hdr_output_metadata ||
-+			new_con_state->colorspace != old_con_state->colorspace;
- 	}
- 
- 	return 0;
diff --git a/target/linux/layerscape/patches-5.4/805-display-0028-drm-imx-hdp-handle-the-various-deep-color-settings.patch b/target/linux/layerscape/patches-5.4/805-display-0028-drm-imx-hdp-handle-the-various-deep-color-settings.patch
deleted file mode 100644
index 14c95579ab..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0028-drm-imx-hdp-handle-the-various-deep-color-settings.patch
+++ /dev/null
@@ -1,187 +0,0 @@
-From 1a8c7e6db6898ea62820bdd4fc9ef70b04ea528a Mon Sep 17 00:00:00 2001
-From: Laurentiu Palcu <laurentiu.palcu@nxp.com>
-Date: Thu, 7 Nov 2019 15:23:41 +0200
-Subject: [PATCH] drm/imx/hdp: handle the various deep-color settings
-
-iMX8MQ has the ability to handle color depths up to 12bpc. This patch adds
-support for higher color depths for various modes.
-
-Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c | 132 ++++++++++++++----------
- 1 file changed, 75 insertions(+), 57 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -67,58 +67,20 @@ static void hdmi_lanes_config(struct cdn
- 	cdns_mhdp_reg_write(mhdp, LANES_CONFIG, 0x00400000 | mhdp->lane_mapping);
- }
- 
--#define RGB_ALLOWED_COLORIMETRY (BIT(HDMI_EXTENDED_COLORIMETRY_BT2020) |\
--				 BIT(HDMI_EXTENDED_COLORIMETRY_OPRGB))
--#define YCC_ALLOWED_COLORIMETRY (BIT(HDMI_EXTENDED_COLORIMETRY_BT2020) |\
--				 BIT(HDMI_EXTENDED_COLORIMETRY_BT2020_CONST_LUM) |\
--				 BIT(HDMI_EXTENDED_COLORIMETRY_OPYCC_601) |\
--				 BIT(HDMI_EXTENDED_COLORIMETRY_S_YCC_601) |\
--				 BIT(HDMI_EXTENDED_COLORIMETRY_XV_YCC_709) |\
--				 BIT(HDMI_EXTENDED_COLORIMETRY_XV_YCC_601))
- static int hdmi_avi_info_set(struct cdns_mhdp_device *mhdp,
--				struct drm_display_mode *mode)
-+			     struct drm_display_mode *mode)
- {
- 	struct hdmi_avi_infoframe frame;
--#if 0
--	struct drm_display_info *di = &mhdp->connector.base.display_info;
--	enum hdmi_extended_colorimetry ext_col;
--	u32 sink_col, allowed_col;
--#endif
- 	int format = mhdp->video_info.color_fmt;
-+	struct drm_connector_state *conn_state = mhdp->connector.base.state;
-+	struct drm_display_mode *adj_mode;
-+	enum hdmi_quantization_range qr;
- 	u8 buf[32];
- 	int ret;
- 
- 	/* Initialise info frame from DRM mode */
--	drm_hdmi_avi_infoframe_from_display_mode(&frame, &mhdp->connector.base, mode);
--
--#if 0 //TODO to DCSS
--	/* Set up colorimetry */
--	allowed_col = format == PXL_RGB ? RGB_ALLOWED_COLORIMETRY :
--						  YCC_ALLOWED_COLORIMETRY;
--
--	sink_col = di->hdmi.colorimetry & allowed_col;
--
--	if (sink_col & BIT(HDMI_EXTENDED_COLORIMETRY_BT2020))
--		ext_col = HDMI_EXTENDED_COLORIMETRY_BT2020;
--	else if (sink_col & BIT(HDMI_EXTENDED_COLORIMETRY_BT2020_CONST_LUM))
--		ext_col = HDMI_EXTENDED_COLORIMETRY_BT2020_CONST_LUM;
--	else if (sink_col & BIT(HDMI_EXTENDED_COLORIMETRY_OPRGB))
--		ext_col = HDMI_EXTENDED_COLORIMETRY_OPRGB;
--	else if (sink_col & BIT(HDMI_EXTENDED_COLORIMETRY_XV_YCC_709))
--		ext_col = HDMI_EXTENDED_COLORIMETRY_XV_YCC_709;
--	else if (sink_col & BIT(HDMI_EXTENDED_COLORIMETRY_OPYCC_601))
--		ext_col = HDMI_EXTENDED_COLORIMETRY_OPYCC_601;
--	else if (sink_col & BIT(HDMI_EXTENDED_COLORIMETRY_S_YCC_601))
--		ext_col = HDMI_EXTENDED_COLORIMETRY_S_YCC_601;
--	else if (sink_col & BIT(HDMI_EXTENDED_COLORIMETRY_XV_YCC_601))
--		ext_col = HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
--	else
--		ext_col = 0;
--
--	frame.colorimetry = sink_col ? HDMI_COLORIMETRY_EXTENDED :
--					  HDMI_COLORIMETRY_NONE;
--	frame.extended_colorimetry = ext_col;
--#endif
-+	drm_hdmi_avi_infoframe_from_display_mode(&frame, &mhdp->connector.base,
-+						 mode);
- 
- 	switch (format) {
- 	case YCBCR_4_4_4:
-@@ -135,6 +97,19 @@ static int hdmi_avi_info_set(struct cdns
- 		break;
- 	}
- 
-+	drm_hdmi_avi_infoframe_colorspace(&frame, conn_state);
-+
-+	adj_mode = &mhdp->bridge.base.encoder->crtc->state->adjusted_mode;
-+
-+	qr = drm_default_rgb_quant_range(adj_mode);
-+
-+	drm_hdmi_avi_infoframe_quant_range(&frame, &mhdp->connector.base,
-+					   adj_mode, qr);
-+
-+	ret = hdmi_avi_infoframe_check(&frame);
-+	if (WARN_ON(ret))
-+		return false;
-+
- 	ret = hdmi_avi_infoframe_pack(&frame, buf + 1, sizeof(buf) - 1);
- 	if (ret < 0) {
- 		DRM_ERROR("failed to pack AVI infoframe: %d\n", ret);
-@@ -404,19 +379,6 @@ static void cdns_hdmi_bridge_mode_set(st
- 	struct drm_display_info *display_info = &mhdp->connector.base.display_info;
- 	struct video_info *video = &mhdp->video_info;
- 
--	switch (display_info->bpc) {
--	case 10:
--		video->color_depth = 10;
--		break;
--	case 6:
--		video->color_depth = 6;
--		break;
--	default:
--		video->color_depth = 8;
--		break;
--	}
--
--	video->color_fmt = PXL_RGB;
- 	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
- 	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
- 
-@@ -428,10 +390,66 @@ static void cdns_hdmi_bridge_mode_set(st
- 	mutex_unlock(&mhdp->lock);
- }
- 
-+bool cdns_hdmi_bridge_mode_fixup(struct drm_bridge *bridge,
-+				 const struct drm_display_mode *mode,
-+				 struct drm_display_mode *adjusted_mode)
-+{
-+	struct cdns_mhdp_device *mhdp = bridge->driver_private;
-+	struct drm_display_info *di = &mhdp->connector.base.display_info;
-+	struct video_info *video = &mhdp->video_info;
-+	int vic = drm_match_cea_mode(mode);
-+
-+	video->color_depth = 8;
-+	video->color_fmt = PXL_RGB;
-+
-+	/* for all other platforms, other than imx8mq */
-+	if (strncmp("imx8mq-hdmi", mhdp->plat_data->plat_name, 11)) {
-+		if (di->bpc == 10 || di->bpc == 6)
-+			video->color_depth = di->bpc;
-+
-+		return true;
-+	}
-+
-+	/* imx8mq */
-+	if (vic == 97 || vic == 96) {
-+		if (di->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_36)
-+			video->color_depth = 12;
-+		else if (di->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_30)
-+			video->color_depth = 10;
-+
-+		if (drm_mode_is_420_only(di, mode) ||
-+		    (drm_mode_is_420_also(di, mode) &&
-+		     video->color_depth > 8)) {
-+			video->color_fmt = YCBCR_4_2_0;
-+
-+			adjusted_mode->private_flags = 1;
-+			return true;
-+		}
-+
-+		video->color_depth = 8;
-+		return true;
-+	}
-+
-+	/* Any defined maximum tmds clock limit we must not exceed*/
-+	if ((di->edid_hdmi_dc_modes & DRM_EDID_HDMI_DC_36) &&
-+	    (mode->clock * 3 / 2 <= di->max_tmds_clock))
-+		video->color_depth = 12;
-+	else if ((di->edid_hdmi_dc_modes & DRM_EDID_HDMI_DC_30) &&
-+		 (mode->clock * 5 / 4 <= di->max_tmds_clock))
-+		video->color_depth = 10;
-+
-+	/* 10-bit color depth for the following modes is not supported */
-+	if ((vic == 95 || vic == 94 || vic == 93) && video->color_depth == 10)
-+		video->color_depth = 8;
-+
-+	return true;
-+}
-+
- static const struct drm_bridge_funcs cdns_hdmi_bridge_funcs = {
- 	.attach = cdns_hdmi_bridge_attach,
- 	.mode_set = cdns_hdmi_bridge_mode_set,
- 	.mode_valid = cdns_hdmi_bridge_mode_valid,
-+	.mode_fixup = cdns_hdmi_bridge_mode_fixup,
- };
- 
- static void hotplug_work_func(struct work_struct *work)
diff --git a/target/linux/layerscape/patches-5.4/805-display-0029-drm-imx-mhdp-Adjustment-core-rate-of-DP-TX-CTRL-for-.patch b/target/linux/layerscape/patches-5.4/805-display-0029-drm-imx-mhdp-Adjustment-core-rate-of-DP-TX-CTRL-for-.patch
deleted file mode 100644
index 443351fd52..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0029-drm-imx-mhdp-Adjustment-core-rate-of-DP-TX-CTRL-for-.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 4d5ce89b5a6faa347464221e4b674be46b951245 Mon Sep 17 00:00:00 2001
-From: Wen He <wen.he_1@nxp.com>
-Date: Wed, 27 Nov 2019 18:24:11 +0800
-Subject: [PATCH] drm: imx: mhdp: Adjustment core rate of DP TX CTRL for
- LS1028A
-
-This Display TX CTRL clock should be ACLK/4, update it to align with
-the specification.
-
-Signed-off-by: Wen He <wen.he_1@nxp.com>
-Reviewed-by: Sandor Yu <sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c | 4 ++++
- drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c         | 3 +++
- include/drm/bridge/cdns-mhdp-common.h         | 1 +
- 3 files changed, 8 insertions(+)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -435,6 +435,7 @@ static int __cdns_dp_probe(struct platfo
- 	}
- 
- 	mhdp->is_hpd = true;
-+	mhdp->is_ls1028a = false;
- 
- 	mhdp->irq[IRQ_IN] = platform_get_irq_byname(pdev, "plug_in");
- 	if (mhdp->irq[IRQ_IN] < 0) {
-@@ -450,6 +451,9 @@ static int __cdns_dp_probe(struct platfo
- 
- 	cdns_dp_parse_dt(mhdp);
- 
-+	if (of_device_is_compatible(dev->of_node, "cdn,ls1028a-dp"))
-+		mhdp->is_ls1028a = true;
-+
- 	cdns_mhdp_plat_call(mhdp, power_on);
- 
- 	cdns_mhdp_plat_call(mhdp, firmware_init);
---- a/drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c
-@@ -526,6 +526,9 @@ int cdns_mhdp_firmware_init_imx8qm(struc
- 
- 	/* configure HDMI/DP core clock */
- 	rate = clk_get_rate(imx_mhdp->clks.clk_core);
-+	if (mhdp->is_ls1028a)
-+		rate = rate / 4;
-+
- 	cdns_mhdp_set_fw_clk(&imx_mhdp->mhdp, rate);
- 
- 	/* un-reset ucpu */
---- a/include/drm/bridge/cdns-mhdp-common.h
-+++ b/include/drm/bridge/cdns-mhdp-common.h
-@@ -685,6 +685,7 @@ struct cdns_mhdp_device {
- 	bool power_up;
- 	bool plugged;
- 	bool is_hpd;
-+	bool is_ls1028a;
- 	struct mutex lock;
- 	struct mutex iolock;
- 
diff --git a/target/linux/layerscape/patches-5.4/805-display-0032-drm-hdmi-imx8-fix-wrong-hdmi-type-with-non-SCDC-HDMI.patch b/target/linux/layerscape/patches-5.4/805-display-0032-drm-hdmi-imx8-fix-wrong-hdmi-type-with-non-SCDC-HDMI.patch
deleted file mode 100644
index 43b590da5e..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0032-drm-hdmi-imx8-fix-wrong-hdmi-type-with-non-SCDC-HDMI.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 94f34486d678f01378f539dee843a74eb476320e Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Fri, 29 Nov 2019 15:00:59 +0800
-Subject: [PATCH] drm: hdmi: imx8: fix wrong hdmi type with non-SCDC HDMI sinks
-
-hdmi type is uninitialized with non-SCDC HDMI sinks.
-And hdmi ctrl will work in DVI mode that is not ecpected.
-Set hdmi type to HDMI1.4 before SCDC support check to fix it.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c | 11 +++++------
- 1 file changed, 5 insertions(+), 6 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -29,7 +29,10 @@
- static void hdmi_sink_config(struct cdns_mhdp_device *mhdp)
- {
- 	struct drm_scdc *scdc = &mhdp->connector.base.display_info.hdmi.scdc;
--	u8 buff;
-+	u8 buff = 0;
-+
-+	/* Default work in HDMI1.4 */
-+	mhdp->hdmi.hdmi_type = MODE_HDMI_1_4;
- 
- 	/* check sink support SCDC or not */
- 	if (scdc->supported != true) {
-@@ -51,11 +54,7 @@ static void hdmi_sink_config(struct cdns
- 		 */
- 		buff = SCDC_SCRAMBLING_ENABLE;
- 		mhdp->hdmi.hdmi_type = MODE_HDMI_2_0;
--	} else {
--		/* Default work in HDMI1.4 */
--		buff = 0;
--		mhdp->hdmi.hdmi_type = MODE_HDMI_1_4;
--	 }
-+	}
- 
- 	/* TMDS config */
- 	cdns_hdmi_scdc_write(mhdp, 0x20, buff);
diff --git a/target/linux/layerscape/patches-5.4/805-display-0033-LF-94-drm-hdmi-imx-Add-hdmi-phy-video-mode-valid-fun.patch b/target/linux/layerscape/patches-5.4/805-display-0033-LF-94-drm-hdmi-imx-Add-hdmi-phy-video-mode-valid-fun.patch
deleted file mode 100644
index e3e555e486..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0033-LF-94-drm-hdmi-imx-Add-hdmi-phy-video-mode-valid-fun.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From 6f23cfed09dc50e532a5d6a535bb992102d03cab Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Wed, 27 Nov 2019 19:08:42 +0800
-Subject: [PATCH] LF-94: drm: hdmi: imx: Add hdmi phy video mode valid function
-
-Add hdmi phy video mode valid function to filter the video modes.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
-Reviewed-by: Robby Cai <robby.cai@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c |  8 +++++++-
- drivers/gpu/drm/imx/cdn-mhdp-hdmi-phy.c         | 23 +++++++++++++++++++++++
- drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c           |  2 ++
- drivers/gpu/drm/imx/cdn-mhdp-phy.h              |  2 ++
- include/drm/bridge/cdns-mhdp-common.h           |  2 ++
- 5 files changed, 36 insertions(+), 1 deletion(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -352,7 +352,9 @@ static enum drm_mode_status
- cdns_hdmi_bridge_mode_valid(struct drm_bridge *bridge,
- 			  const struct drm_display_mode *mode)
- {
-+	struct cdns_mhdp_device *mhdp = bridge->driver_private;
- 	enum drm_mode_status mode_status = MODE_OK;
-+	int ret;
- 
- 	/* We don't support double-clocked and Interlaced modes */
- 	if (mode->flags & DRM_MODE_FLAG_DBLCLK ||
-@@ -367,6 +369,11 @@ cdns_hdmi_bridge_mode_valid(struct drm_b
- 	if (mode->hdisplay > 3840 || mode->vdisplay > 2160)
- 		return MODE_BAD_HVALUE;
- 
-+	mhdp->valid_mode = mode;
-+	ret = cdns_mhdp_plat_call(mhdp, phy_video_valid);
-+	if (ret == false)
-+		return MODE_CLOCK_RANGE;
-+
- 	return mode_status;
- }
- 
-@@ -375,7 +382,6 @@ static void cdns_hdmi_bridge_mode_set(st
- 				    const struct drm_display_mode *mode)
- {
- 	struct cdns_mhdp_device *mhdp = bridge->driver_private;
--	struct drm_display_info *display_info = &mhdp->connector.base.display_info;
- 	struct video_info *video = &mhdp->video_info;
- 
- 	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
---- a/drivers/gpu/drm/imx/cdn-mhdp-hdmi-phy.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-hdmi-phy.c
-@@ -683,6 +683,17 @@ static int hdmi_phy_power_up(struct cdns
- 	return 0;
- }
- 
-+bool cdns_hdmi_phy_video_valid_imx8mq(struct cdns_mhdp_device *mhdp)
-+{
-+	u32 rate = mhdp->valid_mode->clock;
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(imx8mq_ctrl_table); i++)
-+			if(rate == imx8mq_ctrl_table[i].pixel_clk_freq_min)
-+				return true;
-+	return false;
-+}
-+
- int cdns_hdmi_phy_set_imx8mq(struct cdns_mhdp_device *mhdp)
- {
- 	struct drm_display_mode *mode = &mhdp->mode;
-@@ -711,6 +722,18 @@ int cdns_hdmi_phy_set_imx8mq(struct cdns
- 	return true;
- }
- 
-+bool cdns_hdmi_phy_video_valid_imx8qm(struct cdns_mhdp_device *mhdp)
-+{
-+	u32 rate = mhdp->valid_mode->clock;
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(imx8qm_ctrl_table); i++)
-+			if(rate >= imx8qm_ctrl_table[i].pixel_clk_freq_min &&
-+				rate <= imx8qm_ctrl_table[i].pixel_clk_freq_max)
-+				return true;
-+	return false;
-+}
-+
- int cdns_hdmi_phy_set_imx8qm(struct cdns_mhdp_device *mhdp)
- {
- 	struct drm_display_mode *mode = &mhdp->mode;
---- a/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
-@@ -58,6 +58,7 @@ static struct cdns_plat_data imx8mq_hdmi
- 	.bind	= cdns_hdmi_bind,
- 	.unbind	= cdns_hdmi_unbind,
- 	.phy_set = cdns_hdmi_phy_set_imx8mq,
-+	.phy_video_valid = cdns_hdmi_phy_video_valid_imx8mq,
- 	.bus_type = BUS_TYPE_NORMAL_APB,
- };
- 
-@@ -74,6 +75,7 @@ static struct cdns_plat_data imx8qm_hdmi
- 	.bind	= cdns_hdmi_bind,
- 	.unbind	= cdns_hdmi_unbind,
- 	.phy_set = cdns_hdmi_phy_set_imx8qm,
-+	.phy_video_valid = cdns_hdmi_phy_video_valid_imx8qm,
- 	.power_on = cdns_mhdp_power_on_imx8qm,
- 	.firmware_init = cdns_mhdp_firmware_init_imx8qm,
- 	.pclk_rate = cdns_mhdp_pclk_rate_imx8qm,
---- a/drivers/gpu/drm/imx/cdn-mhdp-phy.h
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-phy.h
-@@ -148,6 +148,8 @@
- 
- int cdns_dp_phy_set_imx8mq(struct cdns_mhdp_device *hdp);
- int cdns_dp_phy_set_imx8qm(struct cdns_mhdp_device *hdp);
-+bool cdns_hdmi_phy_video_valid_imx8mq(struct cdns_mhdp_device *hdp);
-+bool cdns_hdmi_phy_video_valid_imx8qm(struct cdns_mhdp_device *hdp);
- int cdns_hdmi_phy_set_imx8mq(struct cdns_mhdp_device *hdp);
- int cdns_hdmi_phy_set_imx8qm(struct cdns_mhdp_device *hdp);
- #endif /* _CDNS_MHDP_PHY_H */
---- a/include/drm/bridge/cdns-mhdp-common.h
-+++ b/include/drm/bridge/cdns-mhdp-common.h
-@@ -643,6 +643,7 @@ struct cdns_plat_data {
- 	void (*plat_deinit)(struct cdns_mhdp_device *mhdp);
- 
- 	int (*phy_set)(struct cdns_mhdp_device *mhdp);
-+	bool (*phy_video_valid)(struct cdns_mhdp_device *mhdp);
- 	int (*firmware_init)(struct cdns_mhdp_device *mhdp);
- 	void (*pclk_rate)(struct cdns_mhdp_device *mhdp);
- 
-@@ -675,6 +676,7 @@ struct cdns_mhdp_device {
- 
- 	struct video_info	video_info;
- 	struct drm_display_mode	mode;
-+	const struct drm_display_mode	*valid_mode;
- 	unsigned int		fw_version;
- 
- 	struct drm_dp_mst_topology_mgr mst_mgr;
diff --git a/target/linux/layerscape/patches-5.4/805-display-0034-media-bus-format-Add-RGB888_1X30_PADLO-support.patch b/target/linux/layerscape/patches-5.4/805-display-0034-media-bus-format-Add-RGB888_1X30_PADLO-support.patch
deleted file mode 100644
index 1bdcaedb04..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0034-media-bus-format-Add-RGB888_1X30_PADLO-support.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 5df87202c0b8524a5eed58b86842219df42d6013 Mon Sep 17 00:00:00 2001
-From: Liu Ying <victor.liu@nxp.com>
-Date: Tue, 9 May 2017 17:16:27 +0800
-Subject: [PATCH] media: bus format: Add RGB888_1X30_PADLO support
-
-This patch adds 30bit RGB888 with low padding support.
-
-Signed-off-by: Liu Ying <victor.liu@nxp.com>
----
- include/uapi/linux/media-bus-format.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/include/uapi/linux/media-bus-format.h
-+++ b/include/uapi/linux/media-bus-format.h
-@@ -63,6 +63,7 @@
- #define MEDIA_BUS_FMT_RGB101010_1X30		0x1018
- #define MEDIA_BUS_FMT_RGB121212_1X36		0x1019
- #define MEDIA_BUS_FMT_RGB161616_1X48		0x101a
-+#define MEDIA_BUS_FMT_RGB888_1X30_PADLO		0x101b
- 
- /* YUV (including grey) - next is	0x202d */
- #define MEDIA_BUS_FMT_Y8_1X8			0x2001
diff --git a/target/linux/layerscape/patches-5.4/805-display-0035-media-bus-format-Add-RGB666_1X30_PADLO-support.patch b/target/linux/layerscape/patches-5.4/805-display-0035-media-bus-format-Add-RGB666_1X30_PADLO-support.patch
deleted file mode 100644
index 0e821ec230..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0035-media-bus-format-Add-RGB666_1X30_PADLO-support.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 0792ee462890fa96cf84dce7ca05634316b64c49 Mon Sep 17 00:00:00 2001
-From: Liu Ying <victor.liu@nxp.com>
-Date: Tue, 9 May 2017 17:38:37 +0800
-Subject: [PATCH] media: bus format: Add RGB666_1X30_PADLO support
-
-This patch adds 30bit RGB666 with low padding support.
-
-Signed-off-by: Liu Ying <victor.liu@nxp.com>
----
- include/uapi/linux/media-bus-format.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/include/uapi/linux/media-bus-format.h
-+++ b/include/uapi/linux/media-bus-format.h
-@@ -64,6 +64,7 @@
- #define MEDIA_BUS_FMT_RGB121212_1X36		0x1019
- #define MEDIA_BUS_FMT_RGB161616_1X48		0x101a
- #define MEDIA_BUS_FMT_RGB888_1X30_PADLO		0x101b
-+#define MEDIA_BUS_FMT_RGB666_1X30_PADLO		0x101c
- 
- /* YUV (including grey) - next is	0x202d */
- #define MEDIA_BUS_FMT_Y8_1X8			0x2001
diff --git a/target/linux/layerscape/patches-5.4/805-display-0036-media-bus-format-Add-RGB101010_1X7X5_SPWG-JEIDA-supp.patch b/target/linux/layerscape/patches-5.4/805-display-0036-media-bus-format-Add-RGB101010_1X7X5_SPWG-JEIDA-supp.patch
deleted file mode 100644
index 2d07206b00..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0036-media-bus-format-Add-RGB101010_1X7X5_SPWG-JEIDA-supp.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 5cc582f5609f947d9692eef5489388c61cfbcc88 Mon Sep 17 00:00:00 2001
-From: Liu Ying <victor.liu@nxp.com>
-Date: Tue, 9 May 2017 17:39:41 +0800
-Subject: [PATCH] media: bus format: Add RGB101010_1X7X5_SPWG/JEIDA support
-
-This patch adds 30bit RGB101010 LVDS pixel formats support for
-the SPWG and JEIDA LVDS mapping standards.  Each pixel is transferred
-on 5 lanes with 7bit respectively.
-
-Signed-off-by: Liu Ying <victor.liu@nxp.com>
----
- include/uapi/linux/media-bus-format.h | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/include/uapi/linux/media-bus-format.h
-+++ b/include/uapi/linux/media-bus-format.h
-@@ -34,7 +34,7 @@
- 
- #define MEDIA_BUS_FMT_FIXED			0x0001
- 
--/* RGB - next is	0x101d */
-+/* RGB - next is	0x101f */
- #define MEDIA_BUS_FMT_RGB444_1X12		0x1016
- #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE	0x1001
- #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE	0x1002
-@@ -65,6 +65,8 @@
- #define MEDIA_BUS_FMT_RGB161616_1X48		0x101a
- #define MEDIA_BUS_FMT_RGB888_1X30_PADLO		0x101b
- #define MEDIA_BUS_FMT_RGB666_1X30_PADLO		0x101c
-+#define MEDIA_BUS_FMT_RGB101010_1X7X5_SPWG	0x101d
-+#define MEDIA_BUS_FMT_RGB101010_1X7X5_JEIDA	0x101e
- 
- /* YUV (including grey) - next is	0x202d */
- #define MEDIA_BUS_FMT_Y8_1X8			0x2001
diff --git a/target/linux/layerscape/patches-5.4/805-display-0037-MLK-15110-1-drm-fourcc-Add-Amphion-tiled-layout-form.patch b/target/linux/layerscape/patches-5.4/805-display-0037-MLK-15110-1-drm-fourcc-Add-Amphion-tiled-layout-form.patch
deleted file mode 100644
index 5edec5400a..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0037-MLK-15110-1-drm-fourcc-Add-Amphion-tiled-layout-form.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 57a12a90496eb310d56ab45f105819d6103b472e Mon Sep 17 00:00:00 2001
-From: Liu Ying <victor.liu@nxp.com>
-Date: Thu, 3 Aug 2017 16:00:46 +0800
-Subject: [PATCH] MLK-15110-1 drm/fourcc: Add Amphion tiled layout format
- modifier
-
-Amphion VPU has a tiled layout using 8x128 pixel vertical strips,
-where each strip contains 1x16 groups of 8x8 pixels in a row-major layout.
-
-Signed-off-by: Song Bing <bing.song@nxp.com>
-Signed-off-by: Liu Ying <victor.liu@nxp.com>
-[ Aisheng : AMPHION changed to 0xf1 ]
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- include/uapi/drm/drm_fourcc.h | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/include/uapi/drm/drm_fourcc.h
-+++ b/include/uapi/drm/drm_fourcc.h
-@@ -309,6 +309,7 @@ extern "C" {
- #define DRM_FORMAT_MOD_VENDOR_BROADCOM 0x07
- #define DRM_FORMAT_MOD_VENDOR_ARM     0x08
- #define DRM_FORMAT_MOD_VENDOR_ALLWINNER 0x09
-+#define DRM_FORMAT_MOD_VENDOR_AMPHION 0xf0
- 
- /* add more to the end as needed */
- 
-@@ -756,6 +757,16 @@ extern "C" {
-  */
- #define DRM_FORMAT_MOD_ALLWINNER_TILED fourcc_mod_code(ALLWINNER, 1)
- 
-+/* Amphion tiled layout */
-+
-+/*
-+ * Amphion 8x128 tiling layout
-+ *
-+ * This is a tiled layout using 8x128 pixel vertical strips, where each strip
-+ * contains 1x16 groups of 8x8 pixels in a row-major layout.
-+ */
-+#define DRM_FORMAT_MOD_AMPHION_TILED fourcc_mod_code(AMPHION, 1)
-+
- #if defined(__cplusplus)
- }
- #endif
diff --git a/target/linux/layerscape/patches-5.4/805-display-0038-MLK-16290-drm-Add-drm_of_component_probe_with_match-.patch b/target/linux/layerscape/patches-5.4/805-display-0038-MLK-16290-drm-Add-drm_of_component_probe_with_match-.patch
deleted file mode 100644
index 40977336a2..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0038-MLK-16290-drm-Add-drm_of_component_probe_with_match-.patch
+++ /dev/null
@@ -1,114 +0,0 @@
-From 43265ca8cc62395e1750686daa8b7007b617e53b Mon Sep 17 00:00:00 2001
-From: Liu Ying <victor.liu@nxp.com>
-Date: Tue, 29 Aug 2017 16:58:58 +0800
-Subject: [PATCH] MLK-16290 drm: Add drm_of_component_probe_with_match() helper
-
-A component master may have both OF based and non-OF based components to be
-bound with.  This patch adds a helper drm_of_component_probe_with_match()
-similar to drm_of_component_probe() so that the new helper may get an
-additional provided match pointer(contains match entries for non-OF based
-components) to support this case.
-
-Tested-by: Meng Mingming <mingming.meng@nxp.com>
-Signed-off-by: Liu Ying <victor.liu@nxp.com>
-(cherry picked from commit c3cad7223488638ab56c20b2c29345487857bc5f)
----
- drivers/gpu/drm/drm_of.c | 31 ++++++++++++++++++++++++++++---
- include/drm/drm_of.h     | 13 +++++++++++++
- 2 files changed, 41 insertions(+), 3 deletions(-)
-
---- a/drivers/gpu/drm/drm_of.c
-+++ b/drivers/gpu/drm/drm_of.c
-@@ -100,8 +100,10 @@ void drm_of_component_match_add(struct d
- EXPORT_SYMBOL_GPL(drm_of_component_match_add);
- 
- /**
-- * drm_of_component_probe - Generic probe function for a component based master
-+ * drm_of_component_probe_with_match - Generic probe function with match
-+ *                                     entries for a component based master
-  * @dev: master device containing the OF node
-+ * @match: component match pointer provided to store matches
-  * @compare_of: compare function used for matching components
-  * @m_ops: component master ops to be used
-  *
-@@ -112,12 +114,12 @@ EXPORT_SYMBOL_GPL(drm_of_component_match
-  *
-  * Returns zero if successful, or one of the standard error codes if it fails.
-  */
--int drm_of_component_probe(struct device *dev,
-+int drm_of_component_probe_with_match(struct device *dev,
-+			   struct component_match *match,
- 			   int (*compare_of)(struct device *, void *),
- 			   const struct component_master_ops *m_ops)
- {
- 	struct device_node *ep, *port, *remote;
--	struct component_match *match = NULL;
- 	int i;
- 
- 	if (!dev->of_node)
-@@ -183,6 +185,29 @@ int drm_of_component_probe(struct device
- 
- 	return component_master_add_with_match(dev, m_ops, match);
- }
-+EXPORT_SYMBOL(drm_of_component_probe_with_match);
-+
-+/**
-+ * drm_of_component_probe - Generic probe function for a component based master
-+ * @dev: master device containing the OF node
-+ * @compare_of: compare function used for matching components
-+ * @master_ops: component master ops to be used
-+ *
-+ * Parse the platform device OF node and bind all the components associated
-+ * with the master. Interface ports are added before the encoders in order to
-+ * satisfy their .bind requirements
-+ * See Documentation/devicetree/bindings/graph.txt for the bindings.
-+ *
-+ * Returns zero if successful, or one of the standard error codes if it fails.
-+ */
-+int drm_of_component_probe(struct device *dev,
-+			   int (*compare_of)(struct device *, void *),
-+			   const struct component_master_ops *m_ops)
-+{
-+	struct component_match *match = NULL;
-+
-+	return drm_of_component_probe_with_match(dev, match, compare_of, m_ops);
-+}
- EXPORT_SYMBOL(drm_of_component_probe);
- 
- /*
---- a/include/drm/drm_of.h
-+++ b/include/drm/drm_of.h
-@@ -7,6 +7,7 @@
- #include <drm/drm_bridge.h>
- #endif
- 
-+struct component_match;
- struct component_master_ops;
- struct component_match;
- struct device;
-@@ -25,6 +26,10 @@ void drm_of_component_match_add(struct d
- 				struct component_match **matchptr,
- 				int (*compare)(struct device *, void *),
- 				struct device_node *node);
-+extern int drm_of_component_probe_with_match(struct device *dev,
-+			   struct component_match *match,
-+			   int (*compare_of)(struct device *, void *),
-+			   const struct component_master_ops *m_ops);
- int drm_of_component_probe(struct device *dev,
- 			   int (*compare_of)(struct device *, void *),
- 			   const struct component_master_ops *m_ops);
-@@ -56,6 +61,14 @@ drm_of_component_match_add(struct device
- {
- }
- 
-+static int drm_of_component_probe_with_match(struct device *dev,
-+			   struct component_match *match,
-+			   int (*compare_of)(struct device *, void *),
-+			   const struct component_master_ops *m_ops)
-+{
-+	return -EINVAL;
-+}
-+
- static inline int
- drm_of_component_probe(struct device *dev,
- 		       int (*compare_of)(struct device *, void *),
diff --git a/target/linux/layerscape/patches-5.4/805-display-0039-MLK-17368-1-drm-add-fourcc-codes-for-Verisilicon-til.patch b/target/linux/layerscape/patches-5.4/805-display-0039-MLK-17368-1-drm-add-fourcc-codes-for-Verisilicon-til.patch
deleted file mode 100644
index 842ca64645..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0039-MLK-17368-1-drm-add-fourcc-codes-for-Verisilicon-til.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 7d11e6c1669b9134b11a48cdf47e5b7ab1b2396c Mon Sep 17 00:00:00 2001
-From: Bing Song <bing.song@nxp.com>
-Date: Fri, 5 Jan 2018 08:33:51 +0200
-Subject: [PATCH] MLK-17368-1 drm: add fourcc codes for Verisilicon tiled
- formats
-
-These formats will be used by VPU and DCSS.
-
-Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
-[ Aisheng : VENDOR_VSI changed to 0xf1 ]
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- include/uapi/drm/drm_fourcc.h | 27 +++++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/include/uapi/drm/drm_fourcc.h
-+++ b/include/uapi/drm/drm_fourcc.h
-@@ -310,6 +310,7 @@ extern "C" {
- #define DRM_FORMAT_MOD_VENDOR_ARM     0x08
- #define DRM_FORMAT_MOD_VENDOR_ALLWINNER 0x09
- #define DRM_FORMAT_MOD_VENDOR_AMPHION 0xf0
-+#define DRM_FORMAT_MOD_VENDOR_VSI     0xf1
- 
- /* add more to the end as needed */
- 
-@@ -767,6 +768,32 @@ extern "C" {
-  */
- #define DRM_FORMAT_MOD_AMPHION_TILED fourcc_mod_code(AMPHION, 1)
- 
-+/* Verisilicon framebuffer modifiers */
-+
-+/*
-+ * Verisilicon 8x4 tiling layout
-+ *
-+ * This is G1 VPU tiled layout using tiles of 8x4 pixels in a row-major
-+ * layout.
-+ */
-+#define DRM_FORMAT_MOD_VSI_G1_TILED fourcc_mod_code(VSI, 1)
-+
-+/*
-+ * Verisilicon 4x4 tiling layout
-+ *
-+ * This is G2 VPU tiled layout using tiles of 4x4 pixels in a row-major
-+ * layout.
-+ */
-+#define DRM_FORMAT_MOD_VSI_G2_TILED fourcc_mod_code(VSI, 2)
-+
-+/*
-+ * Verisilicon 4x4 tiling with compression layout
-+ *
-+ * This is G2 VPU tiled layout using tiles of 4x4 pixels in a row-major
-+ * layout with compression.
-+ */
-+#define DRM_FORMAT_MOD_VSI_G2_TILED_COMPRESSED fourcc_mod_code(VSI, 3)
-+
- #if defined(__cplusplus)
- }
- #endif
diff --git a/target/linux/layerscape/patches-5.4/805-display-0040-drm-fourcc-add-modifier-for-vivante-compressed-tiled.patch b/target/linux/layerscape/patches-5.4/805-display-0040-drm-fourcc-add-modifier-for-vivante-compressed-tiled.patch
deleted file mode 100644
index b4eae5c86d..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0040-drm-fourcc-add-modifier-for-vivante-compressed-tiled.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 8894f4411bee347f7f392823805e77391dcaf305 Mon Sep 17 00:00:00 2001
-From: Fancy Fang <chen.fang@nxp.com>
-Date: Thu, 10 Oct 2019 17:06:15 +0300
-Subject: [PATCH] drm/fourcc: add modifier for vivante compressed tiled layout
-
-Add a new fb modifier for Vivante compressed and tiled
-pixle layout which can be decompressed by DEC400D module
-in DCSS.
-
-Signed-off-by: Fancy Fang <chen.fang@nxp.com>
-Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
----
- include/uapi/drm/drm_fourcc.h | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/include/uapi/drm/drm_fourcc.h
-+++ b/include/uapi/drm/drm_fourcc.h
-@@ -489,6 +489,15 @@ extern "C" {
-  */
- #define DRM_FORMAT_MOD_VIVANTE_SPLIT_SUPER_TILED fourcc_mod_code(VIVANTE, 4)
- 
-+	/*
-+ * Vivante 64x64 super-tiling with compression layout
-+ *
-+ * This is a tiled layout using 64x64 pixel super-tiles, where each super-tile
-+ * contains 8x4 groups of 2x4 tiles of 4x4 pixels each, all in row-major layout
-+ * with compression.
-+ */
-+#define DRM_FORMAT_MOD_VIVANTE_SUPER_TILED_FC	fourcc_mod_code(VIVANTE, 5)
-+
- /* NVIDIA frame buffer modifiers */
- 
- /*
diff --git a/target/linux/layerscape/patches-5.4/805-display-0041-drm-fourcc-add-a-10bits-fully-packed-variant-of-NV12.patch b/target/linux/layerscape/patches-5.4/805-display-0041-drm-fourcc-add-a-10bits-fully-packed-variant-of-NV12.patch
deleted file mode 100644
index 3bccbbd138..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0041-drm-fourcc-add-a-10bits-fully-packed-variant-of-NV12.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 3ef66853a02133244bde79b165d8e5063def5ef4 Mon Sep 17 00:00:00 2001
-From: Randy Li <ayaka@soulik.info>
-Date: Thu, 10 Jan 2019 03:57:10 +0800
-Subject: [PATCH] drm/fourcc: add a 10bits fully packed variant of NV12
-
-This pixel format is a fully packed and 10bits variant of NV12.
-A luma pixel would take 10bits in memory, without any
-filled bits between pixels in a stride.
-
-Signed-off-by: Randy Li <ayaka@soulik.info>
-Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
----
- drivers/gpu/drm/drm_fourcc.c  | 3 +++
- include/uapi/drm/drm_fourcc.h | 8 ++++++++
- 2 files changed, 11 insertions(+)
-
---- a/drivers/gpu/drm/drm_fourcc.c
-+++ b/drivers/gpu/drm/drm_fourcc.c
-@@ -261,6 +261,9 @@ const struct drm_format_info *__drm_form
- 		{ .format = DRM_FORMAT_P016,		.depth = 0,  .num_planes = 2,
- 		  .char_per_block = { 2, 4, 0 }, .block_w = { 1, 0, 0 }, .block_h = { 1, 0, 0 },
- 		  .hsub = 2, .vsub = 2, .is_yuv = true},
-+		{ .format = DRM_FORMAT_NV12_10LE40,	.depth = 0,  .num_planes = 2,
-+		  .char_per_block = { 5, 5, 0 }, .block_w = { 4, 2, 0 }, .block_h = { 1, 1, 0 },
-+		  .hsub = 2, .vsub = 2, .is_yuv = true },
- 		{ .format = DRM_FORMAT_P210,		.depth = 0,
- 		  .num_planes = 2, .char_per_block = { 2, 4, 0 },
- 		  .block_w = { 1, 0, 0 }, .block_h = { 1, 0, 0 }, .hsub = 2,
---- a/include/uapi/drm/drm_fourcc.h
-+++ b/include/uapi/drm/drm_fourcc.h
-@@ -236,6 +236,14 @@ extern "C" {
- #define DRM_FORMAT_NV61		fourcc_code('N', 'V', '6', '1') /* 2x1 subsampled Cb:Cr plane */
- #define DRM_FORMAT_NV24		fourcc_code('N', 'V', '2', '4') /* non-subsampled Cr:Cb plane */
- #define DRM_FORMAT_NV42		fourcc_code('N', 'V', '4', '2') /* non-subsampled Cb:Cr plane */
-+/*
-+ * A fully packed  2 plane YCbCr
-+ * Y1 0-9, Y2 10-19, Y3 20-29, Y4 20-39
-+ * ....
-+ * U1V1: 0-19, U2V2: 20-39
-+ */
-+#define DRM_FORMAT_NV12_10LE40	fourcc_code('R', 'K', '2', '0') /* 2x2 subsampled Cr:Cb plane */
-+
- 
- /*
-  * 2 plane YCbCr MSB aligned
diff --git a/target/linux/layerscape/patches-5.4/805-display-0045-drm-imx-Add-DPU-KMS-support-part-2.patch b/target/linux/layerscape/patches-5.4/805-display-0045-drm-imx-Add-DPU-KMS-support-part-2.patch
deleted file mode 100644
index ae32cf596f..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0045-drm-imx-Add-DPU-KMS-support-part-2.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 2e4fbc789ef2743a6e425b9ca8bf40e40e236d22 Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Mon, 5 Aug 2019 19:08:35 +0800
-Subject: [PATCH] drm/imx: Add DPU KMS support (part 2)
-
-This patch adds i.MX DPU KMS support.
-
-Signed-off-by: Liu Ying <victor.liu@nxp.com>
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- drivers/gpu/drm/imx/imx-drm-core.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/gpu/drm/imx/imx-drm-core.c
-+++ b/drivers/gpu/drm/imx/imx-drm-core.c
-@@ -24,6 +24,7 @@
- #include <drm/drm_plane_helper.h>
- #include <drm/drm_probe_helper.h>
- #include <drm/drm_vblank.h>
-+#include <video/dpu.h>
- 
- #include "imx-drm.h"
- #include "ipuv3-plane.h"
-@@ -183,6 +184,10 @@ static int compare_of(struct device *dev
- 		struct ipu_client_platformdata *pdata = dev->platform_data;
- 
- 		return pdata->of_node == np;
-+	} else if (strcmp(dev->driver->name, "imx-dpu-crtc") == 0) {
-+		struct dpu_client_platformdata *pdata = dev->platform_data;
-+
-+		return pdata->of_node == np;
- 	}
- 
- 	/* Special case for LDB, one device for two channels */
diff --git a/target/linux/layerscape/patches-5.4/805-display-0046-MLK-22171-drm-imx-Avoid-leaking-dangling-pointer-dev.patch b/target/linux/layerscape/patches-5.4/805-display-0046-MLK-22171-drm-imx-Avoid-leaking-dangling-pointer-dev.patch
deleted file mode 100644
index b28f7b172c..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0046-MLK-22171-drm-imx-Avoid-leaking-dangling-pointer-dev.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 98917e88ec975eee0194ca011479e507029009ae Mon Sep 17 00:00:00 2001
-From: Liu Ying <victor.liu@nxp.com>
-Date: Tue, 30 Jul 2019 13:13:16 +0800
-Subject: [PATCH] MLK-22171 drm/imx: Avoid leaking dangling pointer
- dev->driver_data to PM ops
-
-In case ->bind() fails, we should avoid leaking dangling pointer
-dev->driver_data which is set by dev_set_drvdata(), otherwise
-it would be leaked, and seen/dereferenced by PM ops, thus hang
-happens.  Moving dev_set_drvdata() down just before ->bind()
-successfully returns may address this issue.
-
-Signed-off-by: Liu Ying <victor.liu@nxp.com>
----
- drivers/gpu/drm/imx/imx-drm-core.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/gpu/drm/imx/imx-drm-core.c
-+++ b/drivers/gpu/drm/imx/imx-drm-core.c
-@@ -239,8 +239,6 @@ static int imx_drm_bind(struct device *d
- 	if (ret)
- 		goto err_kms;
- 
--	dev_set_drvdata(dev, drm);
--
- 	/* Now try and bind all our sub-components */
- 	ret = component_bind_all(dev, drm);
- 	if (ret)
-@@ -266,6 +264,8 @@ static int imx_drm_bind(struct device *d
- 
- 	drm_fbdev_generic_setup(drm, legacyfb_depth);
- 
-+	dev_set_drvdata(dev, drm);
-+
- 	return 0;
- 
- err_poll_fini:
diff --git a/target/linux/layerscape/patches-5.4/805-display-0047-MLK-18535-6-drm-imx-core-add-LCDIF-support.patch b/target/linux/layerscape/patches-5.4/805-display-0047-MLK-18535-6-drm-imx-core-add-LCDIF-support.patch
deleted file mode 100644
index 96adbace75..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0047-MLK-18535-6-drm-imx-core-add-LCDIF-support.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 813cf104c571bf54e155d6be247c32a8f6aa3e2e Mon Sep 17 00:00:00 2001
-From: Fancy Fang <chen.fang@nxp.com>
-Date: Wed, 6 Jun 2018 23:20:43 +0800
-Subject: [PATCH] MLK-18535-6 drm/imx: core: add LCDIF support
-
-Allows the LCDIF to be one of the supported client
-components. And set the 'legacyfb_depth' of LCDIF
-to be 32.
-
-Signed-off-by: Fancy Fang <chen.fang@nxp.com>
----
- drivers/gpu/drm/imx/imx-drm-core.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/drivers/gpu/drm/imx/imx-drm-core.c
-+++ b/drivers/gpu/drm/imx/imx-drm-core.c
-@@ -12,6 +12,7 @@
- #include <linux/platform_device.h>
- 
- #include <video/imx-ipu-v3.h>
-+#include <video/imx-lcdif.h>
- 
- #include <drm/drm_atomic.h>
- #include <drm/drm_atomic_helper.h>
-@@ -188,6 +189,18 @@ static int compare_of(struct device *dev
- 		struct dpu_client_platformdata *pdata = dev->platform_data;
- 
- 		return pdata->of_node == np;
-+	} else if (strcmp(dev->driver->name, "imx-lcdif-crtc") == 0) {
-+		struct lcdif_client_platformdata *pdata = dev->platform_data;
-+#if IS_ENABLED(CONFIG_DRM_FBDEV_EMULATION)
-+		/* set legacyfb_depth to be 32 for lcdif, since
-+		 * default format of the connectors attached to
-+		 * lcdif is usually RGB888
-+		 */
-+		if (pdata->of_node == np)
-+			legacyfb_depth = 32;
-+#endif
-+
-+		return pdata->of_node == np;
- 	}
- 
- 	/* Special case for LDB, one device for two channels */
diff --git a/target/linux/layerscape/patches-5.4/805-display-0051-LF-296-drm-mhdp-build-mhdp-sub-modules-into-one-driv.patch b/target/linux/layerscape/patches-5.4/805-display-0051-LF-296-drm-mhdp-build-mhdp-sub-modules-into-one-driv.patch
deleted file mode 100644
index 5596fc0fa8..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0051-LF-296-drm-mhdp-build-mhdp-sub-modules-into-one-driv.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 2b8caa86c969cb14e295e60ddc21995b47dc2efe Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Mon, 2 Dec 2019 16:14:09 +0800
-Subject: [PATCH] LF-296: drm: mhdp: build mhdp sub-modules into one driver
- module
-
-mhdp kernel driver support build as module.
-All mhdp sub-modules are built into one driver module.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
-Reviewed-by: Robby Cai <robby.cai@nxp.com>
-(cherry picked from commit f516f7769a52fdda185920a89efa3de9a1ddb9e8)
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/Makefile | 14 +++++++++-----
- drivers/gpu/drm/imx/Makefile            |  4 +++-
- include/drm/bridge/cdns-mhdp-common.h   |  4 ----
- 3 files changed, 12 insertions(+), 10 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/Makefile
-+++ b/drivers/gpu/drm/bridge/cadence/Makefile
-@@ -1,5 +1,9 @@
--obj-$(CONFIG_DRM_CDNS_MHDP) += cdns-mhdp-common.o cdns-mhdp-hdmi.o
--obj-$(CONFIG_DRM_CDNS_HDMI) += cdns-hdmi-core.o
--obj-$(CONFIG_DRM_CDNS_DP) += cdns-dp-core.o
--obj-$(CONFIG_DRM_CDNS_AUDIO) += cdns-mhdp-audio.o
--obj-$(CONFIG_DRM_CDNS_HDMI_CEC) += cdns-mhdp-cec.o
-+
-+cdns_mhdp_drmcore-y := cdns-mhdp-common.o cdns-mhdp-hdmi.o
-+
-+cdns_mhdp_drmcore-$(CONFIG_DRM_CDNS_HDMI) += cdns-hdmi-core.o
-+cdns_mhdp_drmcore-$(CONFIG_DRM_CDNS_DP) += cdns-dp-core.o
-+cdns_mhdp_drmcore-$(CONFIG_DRM_CDNS_AUDIO) += cdns-mhdp-audio.o
-+cdns_mhdp_drmcore-$(CONFIG_DRM_CDNS_HDMI_CEC) += cdns-mhdp-cec.o
-+
-+obj-$(CONFIG_DRM_CDNS_MHDP)		+= cdns_mhdp_drmcore.o
---- a/drivers/gpu/drm/imx/Makefile
-+++ b/drivers/gpu/drm/imx/Makefile
-@@ -9,4 +9,6 @@ obj-$(CONFIG_DRM_IMX_TVE) += imx-tve.o
- obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o
- 
- obj-$(CONFIG_DRM_IMX_HDMI) += dw_hdmi-imx.o
--obj-$(CONFIG_DRM_IMX_CDNS_MHDP) += cdn-mhdp-imxdrv.o cdn-mhdp-dp-phy.o cdn-mhdp-hdmi-phy.o cdn-mhdp-imx8qm.o cdn-mhdp-ls1028a.o
-+
-+cdns_mhdp_imx-objs := cdn-mhdp-imxdrv.o cdn-mhdp-dp-phy.o cdn-mhdp-hdmi-phy.o cdn-mhdp-imx8qm.o cdn-mhdp-ls1028a.o
-+obj-$(CONFIG_DRM_IMX_CDNS_MHDP) += cdns_mhdp_imx.o
---- a/include/drm/bridge/cdns-mhdp-common.h
-+++ b/include/drm/bridge/cdns-mhdp-common.h
-@@ -621,7 +621,6 @@ struct cdns_mhdp_connector {
- 	struct cdns_mhdp_bridge *bridge;
- };
- 
--#ifdef CONFIG_DRM_CDNS_HDMI_CEC
- struct cdns_mhdp_cec {
-        struct cec_adapter *adap;
-        struct device *dev;
-@@ -630,7 +629,6 @@ struct cdns_mhdp_cec {
-        struct cec_msg msg;
-        struct task_struct *cec_worker;
- };
--#endif
- 
- struct cdns_plat_data {
- 	/* Vendor PHY support */
-@@ -704,9 +702,7 @@ struct cdns_mhdp_device {
- 			bool can_mst;
- 		} dp;
- 		struct _hdmi_data {
--#ifdef CONFIG_DRM_CDNS_HDMI_CEC
- 			struct cdns_mhdp_cec cec;
--#endif
- 			u32 char_rate;
- 			u32 hdmi_type;
- 		} hdmi;
diff --git a/target/linux/layerscape/patches-5.4/805-display-0052-LF-323-1-drm-bridge-cdns-move-link-training-to-bridg.patch b/target/linux/layerscape/patches-5.4/805-display-0052-LF-323-1-drm-bridge-cdns-move-link-training-to-bridg.patch
deleted file mode 100644
index 4dcd5c86d6..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0052-LF-323-1-drm-bridge-cdns-move-link-training-to-bridg.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From fa76cd6f0ed305fb2870083842b1ff7bcf027655 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Mon, 9 Dec 2019 17:52:35 +0800
-Subject: [PATCH] LF-323-1: drm/bridge/cdns: move link training to bridge
- enable function
-
-Move link training and video enable functions from mode_set to
-bridge_enable. it is more reasonable.
-cdns_dp_mode_set don't needed in HPD thread, DP link training will
-resetup in bridge_enable when cable connecting.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
-Reviewed-by: Robby Cai <robby.cai@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c | 34 +++++++++++++--------------
- 1 file changed, 16 insertions(+), 18 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -178,19 +178,6 @@ static void cdns_dp_mode_set(struct cdns
- 		return;
- 	}
- 
--	/* Link trainning */
--	ret = cdns_mhdp_train_link(mhdp);
--	if (ret) {
--		DRM_DEV_ERROR(mhdp->dev, "Failed link train %d\n", ret);
--		return;
--	}
--
--	ret = cdns_mhdp_set_video_status(mhdp, CONTROL_VIDEO_VALID);
--	if (ret) {
--		DRM_DEV_ERROR(mhdp->dev, "Failed to valid video %d\n", ret);
--		return;
--	}
--
- 	return;
- }
- 
-@@ -339,6 +326,21 @@ static void cdns_dp_bridge_mode_set(stru
- 
- static void cdn_hdp_bridge_enable(struct drm_bridge *bridge)
- {
-+	struct cdns_mhdp_device *mhdp = bridge->driver_private;
-+	int ret;
-+
-+	/* Link trainning */
-+	ret = cdns_mhdp_train_link(mhdp);
-+	if (ret) {
-+		DRM_DEV_ERROR(mhdp->dev, "Failed link train %d\n", ret);
-+		return;
-+	}
-+
-+	ret = cdns_mhdp_set_video_status(mhdp, CONTROL_VIDEO_VALID);
-+	if (ret) {
-+		DRM_DEV_ERROR(mhdp->dev, "Failed to valid video %d\n", ret);
-+		return;
-+	}
- }
- 
- static void cdn_hdp_bridge_disable(struct drm_bridge *bridge)
-@@ -366,11 +368,7 @@ static void hotplug_work_func(struct wor
- 	drm_helper_hpd_irq_event(connector->dev);
- 
- 	if (connector->status == connector_status_connected) {
--		/* reset video mode after cable plugin */
--		mutex_lock(&mhdp->lock);
--		cdns_dp_mode_set(mhdp);
--		mutex_unlock(&mhdp->lock);
--
-+		/* Cable connedted  */
- 		DRM_INFO("HDMI/DP Cable Plug In\n");
- 		enable_irq(mhdp->irq[IRQ_OUT]);
- 	} else if (connector->status == connector_status_disconnected) {
diff --git a/target/linux/layerscape/patches-5.4/805-display-0053-LF-323-2-drm-bridge-cdns-enhance-link-training-stabi.patch b/target/linux/layerscape/patches-5.4/805-display-0053-LF-323-2-drm-bridge-cdns-enhance-link-training-stabi.patch
deleted file mode 100644
index dec3d78b05..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0053-LF-323-2-drm-bridge-cdns-enhance-link-training-stabi.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 06b758a32bb5ca164cff60f20173ecd71508c5ae Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Mon, 9 Dec 2019 17:58:29 +0800
-Subject: [PATCH] LF-323-2: drm/bridge/cdns: enhance link training stability
-
-Remove drm_dp_link_power_down from bridge_disable function,
-in case some DP sinks aren't follow DP 1.1 specification
-and can not exit the power saving state within 1 ms.
-Add drm_dp_link_power_up to bridge_enable function,
-make sure DP sinks are power up before link training.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
-Reviewed-by: Robby Cai <robby.cai@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -329,6 +329,8 @@ static void cdn_hdp_bridge_enable(struct
- 	struct cdns_mhdp_device *mhdp = bridge->driver_private;
- 	int ret;
- 
-+	drm_dp_link_power_up(&mhdp->dp.aux, &mhdp->dp.link);
-+
- 	/* Link trainning */
- 	ret = cdns_mhdp_train_link(mhdp);
- 	if (ret) {
-@@ -348,7 +350,6 @@ static void cdn_hdp_bridge_disable(struc
- 	struct cdns_mhdp_device *mhdp = bridge->driver_private;
- 
- 	cdns_mhdp_set_video_status(mhdp, CONTROL_VIDEO_IDLE);
--	drm_dp_link_power_down(&mhdp->dp.aux, &mhdp->dp.link);
- }
- 
- static const struct drm_bridge_funcs cdns_dp_bridge_funcs = {
diff --git a/target/linux/layerscape/patches-5.4/805-display-0054-LF-568-1-drm-bridge-cdns-dp-change-bridge_enable-dis.patch b/target/linux/layerscape/patches-5.4/805-display-0054-LF-568-1-drm-bridge-cdns-dp-change-bridge_enable-dis.patch
deleted file mode 100644
index a5a1609790..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0054-LF-568-1-drm-bridge-cdns-dp-change-bridge_enable-dis.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From f5f8d5aeea1919d587de22a2bfa5ba4db8a32ef1 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Fri, 20 Dec 2019 17:11:20 +0800
-Subject: [PATCH] LF-568-1: drm: bridge: cdns: dp: change bridge_enable/disable
- name
-
-Change the bridge_enable/disable function name.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
-Reviewed-by: Robby Cai <robby.cai@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -324,7 +324,7 @@ static void cdns_dp_bridge_mode_set(stru
- 	mutex_unlock(&mhdp->lock);
- }
- 
--static void cdn_hdp_bridge_enable(struct drm_bridge *bridge)
-+static void cdn_dp_bridge_enable(struct drm_bridge *bridge)
- {
- 	struct cdns_mhdp_device *mhdp = bridge->driver_private;
- 	int ret;
-@@ -345,7 +345,7 @@ static void cdn_hdp_bridge_enable(struct
- 	}
- }
- 
--static void cdn_hdp_bridge_disable(struct drm_bridge *bridge)
-+static void cdn_dp_bridge_disable(struct drm_bridge *bridge)
- {	
- 	struct cdns_mhdp_device *mhdp = bridge->driver_private;
- 
-@@ -354,8 +354,8 @@ static void cdn_hdp_bridge_disable(struc
- 
- static const struct drm_bridge_funcs cdns_dp_bridge_funcs = {
- 	.attach = cdns_dp_bridge_attach,
--	.enable = cdn_hdp_bridge_enable,
--	.disable = cdn_hdp_bridge_disable,
-+	.enable = cdn_dp_bridge_enable,
-+	.disable = cdn_dp_bridge_disable,
- 	.mode_set = cdns_dp_bridge_mode_set,
- 	.mode_valid = cdns_dp_bridge_mode_valid,
- };
diff --git a/target/linux/layerscape/patches-5.4/805-display-0055-LF-568-2-drm-gpu-bridge-cdns-Add-force-mode-set-flag.patch b/target/linux/layerscape/patches-5.4/805-display-0055-LF-568-2-drm-gpu-bridge-cdns-Add-force-mode-set-flag.patch
deleted file mode 100644
index 11134536ae..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0055-LF-568-2-drm-gpu-bridge-cdns-Add-force-mode-set-flag.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From d13b544c949e85e39f6c1c20485d8f37f5127e59 Mon Sep 17 00:00:00 2001
-From: Sandor Yu <Sandor.yu@nxp.com>
-Date: Fri, 20 Dec 2019 17:31:52 +0800
-Subject: [PATCH] LF-568-2: drm: gpu: bridge: cdns: Add force mode set flag
-
-In DRM framework, when hdmi/dp cable plugout/plugin in the same HDMI
-sink, because the video mode is same, DRM will not call mode_set.
-But for HDMI 2.0 sink the SCDC configurate will lost, and DP sink
-linktraning status will lost too after cable plugout then plugin.
-
-Currently, hdmi/dp driver will call mode_set function in HPD thread,
-But the mode_set function is called out of DRM framework, and it have
-chance to fail.
-In the patch add force_mode_set flag, set the crtc_state->mode_changed
-to force drm call mode_set when cable plugin.
-
-Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-dp-core.c   |  5 +++++
- drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c | 12 ++++++++----
- drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c           |  4 ++++
- include/drm/bridge/cdns-mhdp-common.h           |  1 +
- 4 files changed, 18 insertions(+), 4 deletions(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c
-@@ -322,6 +322,9 @@ static void cdns_dp_bridge_mode_set(stru
- 	mutex_lock(&mhdp->lock);
- 	cdns_dp_mode_set(mhdp);
- 	mutex_unlock(&mhdp->lock);
-+
-+	/* reset force mode set flag */
-+	mhdp->force_mode_set = false;
- }
- 
- static void cdn_dp_bridge_enable(struct drm_bridge *bridge)
-@@ -375,6 +378,8 @@ static void hotplug_work_func(struct wor
- 	} else if (connector->status == connector_status_disconnected) {
- 		/* Cable Disconnedted  */
- 		DRM_INFO("HDMI/DP Cable Plug Out\n");
-+		/* force mode set for cable replugin to recovery DP video modes */
-+		mhdp->force_mode_set = true;
- 		enable_irq(mhdp->irq[IRQ_IN]);
- 	}
- }
---- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c
-@@ -178,6 +178,10 @@ void cdns_hdmi_mode_set(struct cdns_mhdp
- 	struct drm_display_mode *mode = &mhdp->mode;
- 	int ret;
- 
-+	/* video mode valid check */
-+	if (mode->clock == 0 || mode->hdisplay == 0 ||  mode->vdisplay == 0)
-+		return;
-+
- 	hdmi_lanes_config(mhdp);
- 
- 	cdns_mhdp_plat_call(mhdp, pclk_rate);
-@@ -393,6 +397,8 @@ static void cdns_hdmi_bridge_mode_set(st
- 	mutex_lock(&mhdp->lock);
- 	cdns_hdmi_mode_set(mhdp);
- 	mutex_unlock(&mhdp->lock);
-+	/* reset force mode set flag */
-+	mhdp->force_mode_set = false;
- }
- 
- bool cdns_hdmi_bridge_mode_fixup(struct drm_bridge *bridge,
-@@ -467,14 +473,12 @@ static void hotplug_work_func(struct wor
- 
- 	if (connector->status == connector_status_connected) {
- 		DRM_INFO("HDMI Cable Plug In\n");
--		/* reset video mode after cable plugin */
--		mutex_lock(&mhdp->lock);
--		cdns_hdmi_mode_set(mhdp);
--		mutex_unlock(&mhdp->lock);
- 		enable_irq(mhdp->irq[IRQ_OUT]);
- 	} else if (connector->status == connector_status_disconnected) {
- 		/* Cable Disconnedted  */
- 		DRM_INFO("HDMI Cable Plug Out\n");
-+		/* force mode set for cable replugin to recovery HDMI2.0 video modes */
-+		mhdp->force_mode_set = true;
- 		enable_irq(mhdp->irq[IRQ_IN]);
- 	}
- }
---- a/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
-@@ -40,6 +40,10 @@ static int cdns_mhdp_imx_encoder_atomic_
- 
- 	if (mhdp->plat_data->video_format != 0)
- 		imx_crtc_state->bus_format = mhdp->plat_data->video_format;
-+
-+	if (mhdp->force_mode_set)
-+		crtc_state->mode_changed = true;
-+
- 	return 0;
- }
- 
---- a/include/drm/bridge/cdns-mhdp-common.h
-+++ b/include/drm/bridge/cdns-mhdp-common.h
-@@ -684,6 +684,7 @@ struct cdns_mhdp_device {
- 	bool link_up;
- 	bool power_up;
- 	bool plugged;
-+	bool force_mode_set;
- 	bool is_hpd;
- 	bool is_ls1028a;
- 	struct mutex lock;
diff --git a/target/linux/layerscape/patches-5.4/805-display-0056-LF-794-3-gpu-cdn-imx8qm-Add-firmware-loading-support.patch b/target/linux/layerscape/patches-5.4/805-display-0056-LF-794-3-gpu-cdn-imx8qm-Add-firmware-loading-support.patch
deleted file mode 100644
index ca7f488b8b..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0056-LF-794-3-gpu-cdn-imx8qm-Add-firmware-loading-support.patch
+++ /dev/null
@@ -1,268 +0,0 @@
-From 020578dd022e5d869db52e79c5aba95c1f1a84ec Mon Sep 17 00:00:00 2001
-From: Abel Vesa <abel.vesa@nxp.com>
-Date: Wed, 11 Dec 2019 09:21:23 +0200
-Subject: [PATCH] LF-794-3 gpu: cdn: imx8qm: Add firmware loading support
-
-This allows the  HDP i.MX8QM driver to load the firmware on init
-and resume. In order to have backward compatibility, if there is
-no firmware-name property defined in the hdmi node, the driver
-probing sequence skips the firmware loading.
-
-Also, if u-boot has loaded already a firmware, we run with that
-but when probing the driver, the request_firmware_nowait is used
-to locate and keep safe the firmware for when suspend/resume happens.
-
-This leads to 4 possible scenarios:
-
-1. u-boot loads the firmware, the kernel driver finds the firmware
-when rootfs is mounted. This is the most desirable scenario. Also
-this is the only scenario that allows the hdmi to work after resume.
-
-2. u-boot loads the firmware, the kernel driver _doesn't_ find
-the firmware in rootfs. If there is no suspend ever happening,
-the kernel driver will keep using the firmware that was loaded by
-u-boot. On the first suspend/resume, the firmware is lost
-because the HDMI IP gets powered down.
-
-3. u-boot doesn't load the firmare, the kernel driver probing
-tries to load the firmware, assuming this is available
-(see CONFIG_EXTRA_FIRMWARE).
-
-4. u-boot doesn't load the firmware and the kernel driver is not
-able to find it either. The probing fails and there is no HDMI
-available in linux.
-
-Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
-Reviewed-by: Sandor Yu <sandor.yu@nxp.com>
-Acked-by: Wen He <wen.he_1@nxp.com>
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c | 78 +++++++++++++++++++++++++++++++++--
- drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c | 30 ++++++++++++++
- drivers/gpu/drm/imx/cdns-mhdp-imx.h   |  4 ++
- include/drm/bridge/cdns-mhdp-common.h |  3 ++
- 4 files changed, 111 insertions(+), 4 deletions(-)
-
---- a/drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-imx8qm.c
-@@ -7,12 +7,17 @@
-  */
- #include <dt-bindings/firmware/imx/rsrc.h>
- #include <linux/firmware/imx/sci.h>
-+#include <linux/firmware.h>
- #include <linux/pm_domain.h>
- #include <linux/clk.h>
- #include <drm/drmP.h>
- 
- #include "cdns-mhdp-imx.h"
- 
-+#define FW_IRAM_OFFSET		0x2000
-+#define FW_IRAM_SIZE		0x10000
-+#define FW_DRAM_SIZE		0x8000
-+
- #define PLL_800MHZ (800000000)
- 
- #define HDP_DUAL_MODE_MIN_PCLK_RATE	300000	/* KHz */
-@@ -517,24 +522,69 @@ void cdns_mhdp_pclk_rate_imx8qm(struct c
- 	imx8qm_pixel_link_mux(imx_mhdp);
- }
- 
--int cdns_mhdp_firmware_init_imx8qm(struct cdns_mhdp_device *mhdp)
-+static void cdns_mhdp_firmware_load_cont(const struct firmware *fw, void *context)
- {
--	struct imx_mhdp_device *imx_mhdp =
--				container_of(mhdp, struct imx_mhdp_device, mhdp);
-+	struct imx_mhdp_device *imx_mhdp = context;
-+
-+	imx_mhdp->fw = fw;
-+}
-+
-+static int cdns_mhdp_load_firmware_imx8qm(struct imx_mhdp_device *imx_mhdp)
-+{
-+	const u8 *iram;
-+	const u8 *dram;
- 	u32 rate;
- 	int ret;
- 
- 	/* configure HDMI/DP core clock */
- 	rate = clk_get_rate(imx_mhdp->clks.clk_core);
--	if (mhdp->is_ls1028a)
-+	if (imx_mhdp->mhdp.is_ls1028a)
- 		rate = rate / 4;
- 
- 	cdns_mhdp_set_fw_clk(&imx_mhdp->mhdp, rate);
- 
-+	/* skip fw loading if none is specified */
-+	if (!imx_mhdp->firmware_name)
-+		goto out;
-+
-+	if (!imx_mhdp->fw) {
-+		ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_NOHOTPLUG,
-+						imx_mhdp->firmware_name,
-+						imx_mhdp->mhdp.dev, GFP_KERNEL,
-+						imx_mhdp,
-+						cdns_mhdp_firmware_load_cont);
-+		if (ret < 0) {
-+			DRM_ERROR("failed to load firmware\n");
-+			return -ENOENT;
-+		}
-+	} else {
-+		iram = imx_mhdp->fw->data + FW_IRAM_OFFSET;
-+		dram = iram + FW_IRAM_SIZE;
-+
-+		cdns_mhdp_load_firmware(&imx_mhdp->mhdp,
-+					(const u32 *) iram, FW_IRAM_SIZE,
-+					(const u32 *) dram, FW_DRAM_SIZE);
-+	}
-+
-+out:
- 	/* un-reset ucpu */
- 	cdns_mhdp_bus_write(0, &imx_mhdp->mhdp, APB_CTRL);
- 	DRM_INFO("Started firmware!\n");
- 
-+	return 0;
-+}
-+
-+int cdns_mhdp_firmware_init_imx8qm(struct cdns_mhdp_device *mhdp)
-+{
-+	struct imx_mhdp_device *imx_mhdp =
-+				container_of(mhdp, struct imx_mhdp_device, mhdp);
-+	int ret;
-+
-+	/* load firmware */
-+	ret = cdns_mhdp_load_firmware_imx8qm(imx_mhdp);
-+	if (ret)
-+		return ret;
-+
- 	ret = cdns_mhdp_check_alive(&imx_mhdp->mhdp);
- 	if (ret == false) {
- 		DRM_ERROR("NO HDMI FW running\n");
-@@ -550,3 +600,23 @@ int cdns_mhdp_firmware_init_imx8qm(struc
- 
- 	return 0;
- }
-+
-+int cdns_mhdp_suspend_imx8qm(struct cdns_mhdp_device *mhdp)
-+{
-+	struct imx_mhdp_device *imx_mhdp =
-+				container_of(mhdp, struct imx_mhdp_device, mhdp);
-+
-+	imx8qm_pixel_clk_disable(imx_mhdp);
-+
-+	return 0;
-+}
-+
-+int cdns_mhdp_resume_imx8qm(struct cdns_mhdp_device *mhdp)
-+{
-+	struct imx_mhdp_device *imx_mhdp =
-+				container_of(mhdp, struct imx_mhdp_device, mhdp);
-+
-+	imx8qm_pixel_clk_enable(imx_mhdp);
-+
-+	return cdns_mhdp_firmware_init_imx8qm(mhdp);
-+}
---- a/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
-+++ b/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c
-@@ -82,6 +82,8 @@ static struct cdns_plat_data imx8qm_hdmi
- 	.phy_video_valid = cdns_hdmi_phy_video_valid_imx8qm,
- 	.power_on = cdns_mhdp_power_on_imx8qm,
- 	.firmware_init = cdns_mhdp_firmware_init_imx8qm,
-+	.resume = cdns_mhdp_resume_imx8qm,
-+	.suspend = cdns_mhdp_suspend_imx8qm,
- 	.pclk_rate = cdns_mhdp_pclk_rate_imx8qm,
- 	.plat_init = cdns_mhdp_plat_init_imx8qm,
- 	.plat_deinit = cdns_mhdp_plat_deinit_imx8qm,
-@@ -96,6 +98,8 @@ static struct cdns_plat_data imx8qm_dp_d
- 	.phy_set = cdns_dp_phy_set_imx8qm,
- 	.power_on = cdns_mhdp_power_on_imx8qm,
- 	.firmware_init = cdns_mhdp_firmware_init_imx8qm,
-+	.resume = cdns_mhdp_resume_imx8qm,
-+	.suspend = cdns_mhdp_suspend_imx8qm,
- 	.pclk_rate = cdns_mhdp_pclk_rate_imx8qm,
- 	.plat_init = cdns_mhdp_plat_init_imx8qm,
- 	.plat_deinit = cdns_mhdp_plat_deinit_imx8qm,
-@@ -157,6 +161,9 @@ static int cdns_mhdp_imx_bind(struct dev
- 	encoder = &imx_mhdp->encoder;
- 
- 	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
-+
-+	ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
-+					&imx_mhdp->firmware_name);
- 	/*
- 	 * If we failed to find the CRTC(s) which this encoder is
- 	 * supposed to be connected to, it's because the CRTC has
-@@ -198,6 +205,24 @@ static const struct component_ops cdns_m
- 	.unbind	= cdns_mhdp_imx_unbind,
- };
- 
-+static int cdns_mhdp_imx_suspend(struct device *dev)
-+{
-+	struct imx_mhdp_device *imx_mhdp = dev_get_drvdata(dev);
-+
-+	cdns_mhdp_plat_call(&imx_mhdp->mhdp, suspend);
-+
-+	return 0;
-+}
-+
-+static int cdns_mhdp_imx_resume(struct device *dev)
-+{
-+	struct imx_mhdp_device *imx_mhdp = dev_get_drvdata(dev);
-+
-+	cdns_mhdp_plat_call(&imx_mhdp->mhdp, resume);
-+
-+	return 0;
-+}
-+
- static int cdns_mhdp_imx_probe(struct platform_device *pdev)
- {
- 	return component_add(&pdev->dev, &cdns_mhdp_imx_ops);
-@@ -210,12 +235,17 @@ static int cdns_mhdp_imx_remove(struct p
- 	return 0;
- }
- 
-+static const struct dev_pm_ops cdns_mhdp_imx_pm_ops = {
-+        SET_LATE_SYSTEM_SLEEP_PM_OPS(cdns_mhdp_imx_suspend, cdns_mhdp_imx_resume)
-+};
-+
- static struct platform_driver cdns_mhdp_imx_platform_driver = {
- 	.probe  = cdns_mhdp_imx_probe,
- 	.remove = cdns_mhdp_imx_remove,
- 	.driver = {
- 		.name = "cdns-mhdp-imx",
- 		.of_match_table = cdns_mhdp_imx_dt_ids,
-+		.pm = &cdns_mhdp_imx_pm_ops,
- 	},
- };
- 
---- a/drivers/gpu/drm/imx/cdns-mhdp-imx.h
-+++ b/drivers/gpu/drm/imx/cdns-mhdp-imx.h
-@@ -50,6 +50,8 @@ struct imx_mhdp_device {
- 	bool active;
- 	bool suspended;
- 	struct imx_hdp_clks clks;
-+	const struct firmware *fw;
-+	const char *firmware_name;
- 
- 	int bus_type;
- 
-@@ -65,6 +67,8 @@ void cdns_mhdp_plat_init_imx8qm(struct c
- void cdns_mhdp_plat_deinit_imx8qm(struct cdns_mhdp_device *mhdp);
- void cdns_mhdp_pclk_rate_imx8qm(struct cdns_mhdp_device *mhdp);
- int cdns_mhdp_firmware_init_imx8qm(struct cdns_mhdp_device *mhdp);
-+int cdns_mhdp_resume_imx8qm(struct cdns_mhdp_device *mhdp);
-+int cdns_mhdp_suspend_imx8qm(struct cdns_mhdp_device *mhdp);
- int cdns_mhdp_power_on_imx8qm(struct cdns_mhdp_device *mhdp);
- int cdns_mhdp_power_on_ls1028a(struct cdns_mhdp_device *mhdp);
- void cdns_mhdp_pclk_rate_ls1028a(struct cdns_mhdp_device *mhdp);
---- a/include/drm/bridge/cdns-mhdp-common.h
-+++ b/include/drm/bridge/cdns-mhdp-common.h
-@@ -645,6 +645,9 @@ struct cdns_plat_data {
- 	int (*firmware_init)(struct cdns_mhdp_device *mhdp);
- 	void (*pclk_rate)(struct cdns_mhdp_device *mhdp);
- 
-+	int (*suspend)(struct cdns_mhdp_device *mhdp);
-+	int (*resume)(struct cdns_mhdp_device *mhdp);
-+
- 	int (*power_on)(struct cdns_mhdp_device *mhdp);
- 	int (*power_off)(struct cdns_mhdp_device *mhdp);
- 
diff --git a/target/linux/layerscape/patches-5.4/805-display-0057-LF-794-4-gpu-cdn-mhdp-common-Increase-the-check-aliv.patch b/target/linux/layerscape/patches-5.4/805-display-0057-LF-794-4-gpu-cdn-mhdp-common-Increase-the-check-aliv.patch
deleted file mode 100644
index 734c5014fb..0000000000
--- a/target/linux/layerscape/patches-5.4/805-display-0057-LF-794-4-gpu-cdn-mhdp-common-Increase-the-check-aliv.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 5a019410a0908d7a66a0526a47bed1883c02c5fe Mon Sep 17 00:00:00 2001
-From: Abel Vesa <abel.vesa@nxp.com>
-Date: Thu, 9 Jan 2020 15:20:27 +0200
-Subject: [PATCH] LF-794-4 gpu: cdn: mhdp-common: Increase the check alive
- timeout
-
-It seems that the firmware on i.MX8QM starts a little bit
-after 20us after the ucpu has been relased (un-resetted).
-Therefore, increase the max timeout for check alive to 50us.
-
-Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
-Reviewed-by: Sandor Yu <sandor.yu@nxp.com>
-Acked-by: Wen He <wen.he_1@nxp.com>
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
-+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp-common.c
-@@ -1039,7 +1039,7 @@ EXPORT_SYMBOL(cdns_mhdp_read_hpd);
- bool cdns_mhdp_check_alive(struct cdns_mhdp_device *mhdp)
- {
- 	u32  alive, newalive;
--	u8 retries_left = 10;
-+	u8 retries_left = 50;
- 
- 	alive = cdns_mhdp_bus_read(mhdp, KEEP_ALIVE);
- 
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0001-dmaengine-fsl-dpaa2-qdma-Add-the-DPDMAI-Data-Path-DM.patch b/target/linux/layerscape/patches-5.4/806-dma-0001-dmaengine-fsl-dpaa2-qdma-Add-the-DPDMAI-Data-Path-DM.patch
deleted file mode 100644
index 5ed1725ead..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0001-dmaengine-fsl-dpaa2-qdma-Add-the-DPDMAI-Data-Path-DM.patch
+++ /dev/null
@@ -1,593 +0,0 @@
-From e8a617bd4aa67cc57b7ff8b9a1b2ca0acd4712ac Mon Sep 17 00:00:00 2001
-From: Peng Ma <peng.ma@nxp.com>
-Date: Mon, 4 Mar 2019 15:39:14 +0800
-Subject: [PATCH] dmaengine: fsl-dpaa2-qdma: Add the DPDMAI(Data Path DMA
- Interface) support
-
-The MC(Management Complex) exports the DPDMAI(Data Path DMA Interface)
-object as an interface to operate the DPAA2(Data Path Acceleration
-Architecture 2) qDMA Engine. The DPDMAI enables sending frame-based
-requests to qDMA and receiving back confirmation response on transaction
-completion, utilizing the DPAA2 QBMan(Queue Manager and Buffer Manager
-hardware) infrastructure. DPDMAI object provides up to two priorities for
-processing qDMA requests.
-The following list summarizes the DPDMAI main features and capabilities:
-	1. Supports up to two scheduling priorities for processing
-	service requests.
-	- Each DPDMAI transmit queue is mapped to one of two service
-	priorities, allowing further prioritization in hardware between
-	requests from different DPDMAI objects.
-	2. Supports up to two receive queues for incoming transaction
-	completion confirmations.
-	- Each DPDMAI receive queue is mapped to one of two receive
-	priorities, allowing further prioritization between other
-	interfaces when associating the DPDMAI receive queues to DPIO
-	or DPCON(Data Path Concentrator) objects.
-	3. Supports different scheduling options for processing received
-	packets:
-	- Queues can be configured either in 'parked' mode (default),
-	or attached to a DPIO object, or attached to DPCON object.
-	4. Allows interaction with one or more DPIO objects for
-	dequeueing/enqueueing frame descriptors(FD) and for
-	acquiring/releasing buffers.
-	5. Supports enable, disable, and reset operations.
-
-Add dpdmai to support some platforms with dpaa2 qdma engine.
-
-Signed-off-by: Peng Ma <peng.ma@nxp.com>
----
- drivers/dma/fsl-dpaa2-qdma/dpdmai.c | 366 ++++++++++++++++++++++++++++++++++++
- drivers/dma/fsl-dpaa2-qdma/dpdmai.h | 177 +++++++++++++++++
- 2 files changed, 543 insertions(+)
- create mode 100644 drivers/dma/fsl-dpaa2-qdma/dpdmai.c
- create mode 100644 drivers/dma/fsl-dpaa2-qdma/dpdmai.h
-
---- /dev/null
-+++ b/drivers/dma/fsl-dpaa2-qdma/dpdmai.c
-@@ -0,0 +1,366 @@
-+// SPDX-License-Identifier: GPL-2.0
-+// Copyright 2019 NXP
-+
-+#include <linux/types.h>
-+#include <linux/io.h>
-+#include <linux/fsl/mc.h>
-+#include "dpdmai.h"
-+
-+struct dpdmai_rsp_get_attributes {
-+	__le32 id;
-+	u8 num_of_priorities;
-+	u8 pad0[3];
-+	__le16 major;
-+	__le16 minor;
-+};
-+
-+struct dpdmai_cmd_queue {
-+	__le32 dest_id;
-+	u8 priority;
-+	u8 queue;
-+	u8 dest_type;
-+	u8 pad;
-+	__le64 user_ctx;
-+	union {
-+		__le32 options;
-+		__le32 fqid;
-+	};
-+};
-+
-+struct dpdmai_rsp_get_tx_queue {
-+	__le64 pad;
-+	__le32 fqid;
-+};
-+
-+#define MC_CMD_OP(_cmd, _param, _offset, _width, _type, _arg) \
-+	((_cmd).params[_param] |= mc_enc((_offset), (_width), _arg))
-+
-+/* cmd, param, offset, width, type, arg_name */
-+#define DPDMAI_CMD_CREATE(_cmd, _cfg) \
-+do { \
-+	typeof(_cmd) (cmd) = (_cmd); \
-+	typeof(_cfg) (cfg) = (_cfg); \
-+	MC_CMD_OP(cmd, 0, 8,  8,  u8,  (cfg)->priorities[0]);\
-+	MC_CMD_OP(cmd, 0, 16, 8,  u8,  (cfg)->priorities[1]);\
-+} while (0)
-+
-+static inline u64 mc_enc(int lsoffset, int width, u64 val)
-+{
-+	return (val & MAKE_UMASK64(width)) << lsoffset;
-+}
-+
-+/**
-+ * dpdmai_open() - Open a control session for the specified object
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @dpdmai_id:	DPDMAI unique ID
-+ * @token:	Returned token; use in subsequent API calls
-+ *
-+ * This function can be used to open a control session for an
-+ * already created object; an object may have been declared in
-+ * the DPL or by calling the dpdmai_create() function.
-+ * This function returns a unique authentication token,
-+ * associated with the specific object ID and the specific MC
-+ * portal; this token must be used in all subsequent commands for
-+ * this specific object.
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmai_open(struct fsl_mc_io *mc_io, u32 cmd_flags,
-+		int dpdmai_id, u16 *token)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	__le64 *cmd_dpdmai_id;
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMAI_CMDID_OPEN,
-+					  cmd_flags, 0);
-+
-+	cmd_dpdmai_id = cmd.params;
-+	*cmd_dpdmai_id = cpu_to_le32(dpdmai_id);
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	*token = mc_cmd_hdr_read_token(&cmd);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpdmai_close() - Close the control session of the object
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMAI object
-+ *
-+ * After this function is called, no further operations are
-+ * allowed on the object without opening a new control session.
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmai_close(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMAI_CMDID_CLOSE,
-+					  cmd_flags, token);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmai_create() - Create the DPDMAI object
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @cfg:	Configuration structure
-+ * @token:	Returned token; use in subsequent API calls
-+ *
-+ * Create the DPDMAI object, allocate required resources and
-+ * perform required initialization.
-+ *
-+ * The object can be created either by declaring it in the
-+ * DPL file, or by calling this function.
-+ *
-+ * This function returns a unique authentication token,
-+ * associated with the specific object ID and the specific MC
-+ * portal; this token must be used in all subsequent calls to
-+ * this specific object. For objects that are created using the
-+ * DPL file, call dpdmai_open() function to get an authentication
-+ * token first.
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmai_create(struct fsl_mc_io *mc_io, u32 cmd_flags,
-+		  const struct dpdmai_cfg *cfg, u16 *token)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMAI_CMDID_CREATE,
-+					  cmd_flags, 0);
-+	DPDMAI_CMD_CREATE(cmd, cfg);
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	*token = mc_cmd_hdr_read_token(&cmd);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpdmai_enable() - Enable the DPDMAI, allow sending and receiving frames.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMAI object
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmai_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMAI_CMDID_ENABLE,
-+					  cmd_flags, token);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmai_disable() - Disable the DPDMAI, stop sending and receiving frames.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMAI object
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmai_disable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMAI_CMDID_DISABLE,
-+					  cmd_flags, token);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmai_reset() - Reset the DPDMAI, returns the object to initial state.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMAI object
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmai_reset(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token)
-+{
-+	struct fsl_mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMAI_CMDID_RESET,
-+					  cmd_flags, token);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmai_get_attributes() - Retrieve DPDMAI attributes.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMAI object
-+ * @attr:	Returned object's attributes
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmai_get_attributes(struct fsl_mc_io *mc_io, u32 cmd_flags,
-+			  u16 token, struct dpdmai_attr *attr)
-+{
-+	struct dpdmai_rsp_get_attributes *rsp_params;
-+	struct fsl_mc_command cmd = { 0 };
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMAI_CMDID_GET_ATTR,
-+					  cmd_flags, token);
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	rsp_params = (struct dpdmai_rsp_get_attributes *)cmd.params;
-+	attr->id = le32_to_cpu(rsp_params->id);
-+	attr->version.major = le16_to_cpu(rsp_params->major);
-+	attr->version.minor = le16_to_cpu(rsp_params->minor);
-+	attr->num_of_priorities = rsp_params->num_of_priorities;
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpdmai_set_rx_queue() - Set Rx queue configuration
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMAI object
-+ * @priority:	Select the queue relative to number of
-+ *		priorities configured at DPDMAI creation
-+ * @cfg:	Rx queue configuration
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmai_set_rx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			u8 priority, const struct dpdmai_rx_queue_cfg *cfg)
-+{
-+	struct dpdmai_cmd_queue *cmd_params;
-+	struct fsl_mc_command cmd = { 0 };
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMAI_CMDID_SET_RX_QUEUE,
-+					  cmd_flags, token);
-+
-+	cmd_params = (struct dpdmai_cmd_queue *)cmd.params;
-+	cmd_params->dest_id = cpu_to_le32(cfg->dest_cfg.dest_id);
-+	cmd_params->priority = cfg->dest_cfg.priority;
-+	cmd_params->queue = priority;
-+	cmd_params->dest_type = cfg->dest_cfg.dest_type;
-+	cmd_params->user_ctx = cpu_to_le64(cfg->user_ctx);
-+	cmd_params->options = cpu_to_le32(cfg->options);
-+
-+	/* send command to mc*/
-+	return mc_send_command(mc_io, &cmd);
-+}
-+
-+/**
-+ * dpdmai_get_rx_queue() - Retrieve Rx queue attributes.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMAI object
-+ * @priority:	Select the queue relative to number of
-+ *				priorities configured at DPDMAI creation
-+ * @attr:	Returned Rx queue attributes
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmai_get_rx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			u8 priority, struct dpdmai_rx_queue_attr *attr)
-+{
-+	struct dpdmai_cmd_queue *cmd_params;
-+	struct fsl_mc_command cmd = { 0 };
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMAI_CMDID_GET_RX_QUEUE,
-+					  cmd_flags, token);
-+
-+	cmd_params = (struct dpdmai_cmd_queue *)cmd.params;
-+	cmd_params->queue = priority;
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+	attr->dest_cfg.dest_id = le32_to_cpu(cmd_params->dest_id);
-+	attr->dest_cfg.priority = cmd_params->priority;
-+	attr->dest_cfg.dest_type = cmd_params->dest_type;
-+	attr->user_ctx = le64_to_cpu(cmd_params->user_ctx);
-+	attr->fqid = le32_to_cpu(cmd_params->fqid);
-+
-+	return 0;
-+}
-+
-+/**
-+ * dpdmai_get_tx_queue() - Retrieve Tx queue attributes.
-+ * @mc_io:	Pointer to MC portal's I/O object
-+ * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
-+ * @token:	Token of DPDMAI object
-+ * @priority:	Select the queue relative to number of
-+ *			priorities configured at DPDMAI creation
-+ * @fqid:	Returned Tx queue
-+ *
-+ * Return:	'0' on Success; Error code otherwise.
-+ */
-+int dpdmai_get_tx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags,
-+			u16 token, u8 priority, u32 *fqid)
-+{
-+	struct dpdmai_rsp_get_tx_queue *rsp_params;
-+	struct dpdmai_cmd_queue *cmd_params;
-+	struct fsl_mc_command cmd = { 0 };
-+	int err;
-+
-+	/* prepare command */
-+	cmd.header = mc_encode_cmd_header(DPDMAI_CMDID_GET_TX_QUEUE,
-+					  cmd_flags, token);
-+
-+	cmd_params = (struct dpdmai_cmd_queue *)cmd.params;
-+	cmd_params->queue = priority;
-+
-+	/* send command to mc*/
-+	err = mc_send_command(mc_io, &cmd);
-+	if (err)
-+		return err;
-+
-+	/* retrieve response parameters */
-+
-+	rsp_params = (struct dpdmai_rsp_get_tx_queue *)cmd.params;
-+	*fqid = le32_to_cpu(rsp_params->fqid);
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/dma/fsl-dpaa2-qdma/dpdmai.h
-@@ -0,0 +1,177 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/* Copyright 2019 NXP */
-+
-+#ifndef __FSL_DPDMAI_H
-+#define __FSL_DPDMAI_H
-+
-+/* DPDMAI Version */
-+#define DPDMAI_VER_MAJOR	2
-+#define DPDMAI_VER_MINOR	2
-+
-+#define DPDMAI_CMD_BASE_VERSION	0
-+#define DPDMAI_CMD_ID_OFFSET	4
-+
-+#define DPDMAI_CMDID_FORMAT(x)	(((x) << DPDMAI_CMD_ID_OFFSET) | \
-+				DPDMAI_CMD_BASE_VERSION)
-+
-+/* Command IDs */
-+#define DPDMAI_CMDID_CLOSE		DPDMAI_CMDID_FORMAT(0x800)
-+#define DPDMAI_CMDID_OPEN               DPDMAI_CMDID_FORMAT(0x80E)
-+#define DPDMAI_CMDID_CREATE             DPDMAI_CMDID_FORMAT(0x90E)
-+
-+#define DPDMAI_CMDID_ENABLE             DPDMAI_CMDID_FORMAT(0x002)
-+#define DPDMAI_CMDID_DISABLE            DPDMAI_CMDID_FORMAT(0x003)
-+#define DPDMAI_CMDID_GET_ATTR           DPDMAI_CMDID_FORMAT(0x004)
-+#define DPDMAI_CMDID_RESET              DPDMAI_CMDID_FORMAT(0x005)
-+#define DPDMAI_CMDID_IS_ENABLED         DPDMAI_CMDID_FORMAT(0x006)
-+
-+#define DPDMAI_CMDID_SET_IRQ            DPDMAI_CMDID_FORMAT(0x010)
-+#define DPDMAI_CMDID_GET_IRQ            DPDMAI_CMDID_FORMAT(0x011)
-+#define DPDMAI_CMDID_SET_IRQ_ENABLE     DPDMAI_CMDID_FORMAT(0x012)
-+#define DPDMAI_CMDID_GET_IRQ_ENABLE     DPDMAI_CMDID_FORMAT(0x013)
-+#define DPDMAI_CMDID_SET_IRQ_MASK       DPDMAI_CMDID_FORMAT(0x014)
-+#define DPDMAI_CMDID_GET_IRQ_MASK       DPDMAI_CMDID_FORMAT(0x015)
-+#define DPDMAI_CMDID_GET_IRQ_STATUS     DPDMAI_CMDID_FORMAT(0x016)
-+#define DPDMAI_CMDID_CLEAR_IRQ_STATUS	DPDMAI_CMDID_FORMAT(0x017)
-+
-+#define DPDMAI_CMDID_SET_RX_QUEUE	DPDMAI_CMDID_FORMAT(0x1A0)
-+#define DPDMAI_CMDID_GET_RX_QUEUE       DPDMAI_CMDID_FORMAT(0x1A1)
-+#define DPDMAI_CMDID_GET_TX_QUEUE       DPDMAI_CMDID_FORMAT(0x1A2)
-+
-+#define MC_CMD_HDR_TOKEN_O 32  /* Token field offset */
-+#define MC_CMD_HDR_TOKEN_S 16  /* Token field size */
-+
-+#define MAKE_UMASK64(_width) \
-+	((u64)((_width) < 64 ? ((u64)1 << (_width)) - 1 : (u64)-1))
-+
-+/* Data Path DMA Interface API
-+ * Contains initialization APIs and runtime control APIs for DPDMAI
-+ */
-+
-+/**
-+ * Maximum number of Tx/Rx priorities per DPDMAI object
-+ */
-+#define DPDMAI_PRIO_NUM		2
-+
-+/* DPDMAI queue modification options */
-+
-+/**
-+ * Select to modify the user's context associated with the queue
-+ */
-+#define DPDMAI_QUEUE_OPT_USER_CTX	0x1
-+
-+/**
-+ * Select to modify the queue's destination
-+ */
-+#define DPDMAI_QUEUE_OPT_DEST		0x2
-+
-+/**
-+ * struct dpdmai_cfg - Structure representing DPDMAI configuration
-+ * @priorities: Priorities for the DMA hardware processing; valid priorities are
-+ *	configured with values 1-8; the entry following last valid entry
-+ *	should be configured with 0
-+ */
-+struct dpdmai_cfg {
-+	u8 priorities[DPDMAI_PRIO_NUM];
-+};
-+
-+/**
-+ * struct dpdmai_attr - Structure representing DPDMAI attributes
-+ * @id: DPDMAI object ID
-+ * @version: DPDMAI version
-+ * @num_of_priorities: number of priorities
-+ */
-+struct dpdmai_attr {
-+	int	id;
-+	/**
-+	 * struct version - DPDMAI version
-+	 * @major: DPDMAI major version
-+	 * @minor: DPDMAI minor version
-+	 */
-+	struct {
-+		u16 major;
-+		u16 minor;
-+	} version;
-+	u8 num_of_priorities;
-+};
-+
-+/**
-+ * enum dpdmai_dest - DPDMAI destination types
-+ * @DPDMAI_DEST_NONE: Unassigned destination; The queue is set in parked mode
-+ *	and does not generate FQDAN notifications; user is expected to dequeue
-+ *	from the queue based on polling or other user-defined method
-+ * @DPDMAI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN
-+ *	notifications to the specified DPIO; user is expected to dequeue
-+ *	from the queue only after notification is received
-+ * @DPDMAI_DEST_DPCON: The queue is set in schedule mode and does not generate
-+ *	FQDAN notifications, but is connected to the specified DPCON object;
-+ *	user is expected to dequeue from the DPCON channel
-+ */
-+enum dpdmai_dest {
-+	DPDMAI_DEST_NONE = 0,
-+	DPDMAI_DEST_DPIO = 1,
-+	DPDMAI_DEST_DPCON = 2
-+};
-+
-+/**
-+ * struct dpdmai_dest_cfg - Structure representing DPDMAI destination parameters
-+ * @dest_type: Destination type
-+ * @dest_id: Either DPIO ID or DPCON ID, depending on the destination type
-+ * @priority: Priority selection within the DPIO or DPCON channel; valid values
-+ *	are 0-1 or 0-7, depending on the number of priorities in that
-+ *	channel; not relevant for 'DPDMAI_DEST_NONE' option
-+ */
-+struct dpdmai_dest_cfg {
-+	enum dpdmai_dest dest_type;
-+	int dest_id;
-+	u8 priority;
-+};
-+
-+/**
-+ * struct dpdmai_rx_queue_cfg - DPDMAI RX queue configuration
-+ * @options: Flags representing the suggested modifications to the queue;
-+ *	Use any combination of 'DPDMAI_QUEUE_OPT_<X>' flags
-+ * @user_ctx: User context value provided in the frame descriptor of each
-+ *	dequeued frame;
-+ *	valid only if 'DPDMAI_QUEUE_OPT_USER_CTX' is contained in 'options'
-+ * @dest_cfg: Queue destination parameters;
-+ *	valid only if 'DPDMAI_QUEUE_OPT_DEST' is contained in 'options'
-+ */
-+struct dpdmai_rx_queue_cfg {
-+	struct dpdmai_dest_cfg dest_cfg;
-+	u32 options;
-+	u64 user_ctx;
-+
-+};
-+
-+/**
-+ * struct dpdmai_rx_queue_attr - Structure representing attributes of Rx queues
-+ * @user_ctx:  User context value provided in the frame descriptor of each
-+ *	 dequeued frame
-+ * @dest_cfg: Queue destination configuration
-+ * @fqid: Virtual FQID value to be used for dequeue operations
-+ */
-+struct dpdmai_rx_queue_attr {
-+	struct dpdmai_dest_cfg	dest_cfg;
-+	u64 user_ctx;
-+	u32 fqid;
-+};
-+
-+int dpdmai_open(struct fsl_mc_io *mc_io, u32 cmd_flags,
-+		int dpdmai_id, u16 *token);
-+int dpdmai_close(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
-+int dpdmai_create(struct fsl_mc_io *mc_io, u32 cmd_flags,
-+		  const struct dpdmai_cfg *cfg, u16 *token);
-+int dpdmai_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
-+int dpdmai_disable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
-+int dpdmai_reset(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
-+int dpdmai_get_attributes(struct fsl_mc_io *mc_io, u32 cmd_flags,
-+			  u16 token, struct dpdmai_attr	*attr);
-+int dpdmai_set_rx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			u8 priority, const struct dpdmai_rx_queue_cfg *cfg);
-+int dpdmai_get_rx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
-+			u8 priority, struct dpdmai_rx_queue_attr *attr);
-+int dpdmai_get_tx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags,
-+			u16 token, u8 priority, u32 *fqid);
-+
-+#endif /* __FSL_DPDMAI_H */
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0002-dmaengine-fsl-dpaa2-qdma-Add-NXP-dpaa2-qDMA-controll.patch b/target/linux/layerscape/patches-5.4/806-dma-0002-dmaengine-fsl-dpaa2-qdma-Add-NXP-dpaa2-qDMA-controll.patch
deleted file mode 100644
index 72d234d3ef..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0002-dmaengine-fsl-dpaa2-qdma-Add-NXP-dpaa2-qDMA-controll.patch
+++ /dev/null
@@ -1,1061 +0,0 @@
-From 87db029b2576ccae40dcf8173e2fbb84fdbec1a5 Mon Sep 17 00:00:00 2001
-From: Peng Ma <peng.ma@nxp.com>
-Date: Mon, 4 Mar 2019 15:45:56 +0800
-Subject: [PATCH] dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller
- driver for Layerscape SoCs
-
-DPPA2(Data Path Acceleration Architecture 2) qDMA supports
-virtualized channel by allowing DMA jobs to be enqueued into
-different work queues. Core can initiate a DMA transaction by
-preparing a frame descriptor(FD) for each DMA job and enqueuing
-this job through a hardware portal. DPAA2 components can also
-prepare a FD and enqueue a DMA job through a hardware portal.
-The qDMA prefetches DMA jobs through DPAA2 hardware portal. It
-then schedules and dispatches to internal DMA hardware engines,
-which generate read and write requests. Both qDMA source data and
-destination data can be either contiguous or non-contiguous using
-one or more scatter/gather tables.
-The qDMA supports global bandwidth flow control where all DMA
-transactions are stalled if the bandwidth threshold has been reached.
-Also supported are transaction based read throttling.
-
-Add NXP dppa2 qDMA to support some of Layerscape SoCs.
-such as: LS1088A, LS208xA, LX2, etc.
-
-Signed-off-by: Peng Ma <peng.ma@nxp.com>
----
- drivers/dma/Kconfig                     |   2 +
- drivers/dma/Makefile                    |   1 +
- drivers/dma/fsl-dpaa2-qdma/Kconfig      |   9 +
- drivers/dma/fsl-dpaa2-qdma/Makefile     |   3 +
- drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c | 825 ++++++++++++++++++++++++++++++++
- drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.h | 153 ++++++
- 6 files changed, 993 insertions(+)
- create mode 100644 drivers/dma/fsl-dpaa2-qdma/Kconfig
- create mode 100644 drivers/dma/fsl-dpaa2-qdma/Makefile
- create mode 100644 drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c
- create mode 100644 drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.h
-
---- a/drivers/dma/Kconfig
-+++ b/drivers/dma/Kconfig
-@@ -670,6 +670,8 @@ source "drivers/dma/sh/Kconfig"
- 
- source "drivers/dma/ti/Kconfig"
- 
-+source "drivers/dma/fsl-dpaa2-qdma/Kconfig"
-+
- # clients
- comment "DMA Clients"
- 	depends on DMA_ENGINE
---- a/drivers/dma/Makefile
-+++ b/drivers/dma/Makefile
-@@ -75,6 +75,7 @@ obj-$(CONFIG_UNIPHIER_MDMAC) += uniphier
- obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
- obj-$(CONFIG_ZX_DMA) += zx_dma.o
- obj-$(CONFIG_ST_FDMA) += st_fdma.o
-+obj-$(CONFIG_FSL_DPAA2_QDMA) += fsl-dpaa2-qdma/
- 
- obj-y += mediatek/
- obj-y += qcom/
---- /dev/null
-+++ b/drivers/dma/fsl-dpaa2-qdma/Kconfig
-@@ -0,0 +1,9 @@
-+menuconfig FSL_DPAA2_QDMA
-+	tristate "NXP DPAA2 QDMA"
-+	depends on ARM64
-+	depends on FSL_MC_BUS && FSL_MC_DPIO
-+	select DMA_ENGINE
-+	select DMA_VIRTUAL_CHANNELS
-+	help
-+	  NXP Data Path Acceleration Architecture 2 QDMA driver,
-+	  using the NXP MC bus driver.
---- /dev/null
-+++ b/drivers/dma/fsl-dpaa2-qdma/Makefile
-@@ -0,0 +1,3 @@
-+# SPDX-License-Identifier: GPL-2.0
-+# Makefile for the NXP DPAA2 qDMA controllers
-+obj-$(CONFIG_FSL_DPAA2_QDMA) += dpaa2-qdma.o dpdmai.o
---- /dev/null
-+++ b/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c
-@@ -0,0 +1,825 @@
-+// SPDX-License-Identifier: GPL-2.0
-+// Copyright 2019 NXP
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/dmapool.h>
-+#include <linux/of_irq.h>
-+#include <linux/iommu.h>
-+#include <linux/sys_soc.h>
-+#include <linux/fsl/mc.h>
-+#include <soc/fsl/dpaa2-io.h>
-+
-+#include "../virt-dma.h"
-+#include "dpdmai.h"
-+#include "dpaa2-qdma.h"
-+
-+static bool smmu_disable = true;
-+
-+static struct dpaa2_qdma_chan *to_dpaa2_qdma_chan(struct dma_chan *chan)
-+{
-+	return container_of(chan, struct dpaa2_qdma_chan, vchan.chan);
-+}
-+
-+static struct dpaa2_qdma_comp *to_fsl_qdma_comp(struct virt_dma_desc *vd)
-+{
-+	return container_of(vd, struct dpaa2_qdma_comp, vdesc);
-+}
-+
-+static int dpaa2_qdma_alloc_chan_resources(struct dma_chan *chan)
-+{
-+	struct dpaa2_qdma_chan *dpaa2_chan = to_dpaa2_qdma_chan(chan);
-+	struct dpaa2_qdma_engine *dpaa2_qdma = dpaa2_chan->qdma;
-+	struct device *dev = &dpaa2_qdma->priv->dpdmai_dev->dev;
-+
-+	dpaa2_chan->fd_pool = dma_pool_create("fd_pool", dev,
-+					      sizeof(struct dpaa2_fd),
-+					      sizeof(struct dpaa2_fd), 0);
-+	if (!dpaa2_chan->fd_pool)
-+		goto err;
-+
-+	dpaa2_chan->fl_pool = dma_pool_create("fl_pool", dev,
-+					      sizeof(struct dpaa2_fl_entry),
-+					      sizeof(struct dpaa2_fl_entry), 0);
-+	if (!dpaa2_chan->fl_pool)
-+		goto err_fd;
-+
-+	dpaa2_chan->sdd_pool =
-+		dma_pool_create("sdd_pool", dev,
-+				sizeof(struct dpaa2_qdma_sd_d),
-+				sizeof(struct dpaa2_qdma_sd_d), 0);
-+	if (!dpaa2_chan->sdd_pool)
-+		goto err_fl;
-+
-+	return dpaa2_qdma->desc_allocated++;
-+err_fl:
-+	dma_pool_destroy(dpaa2_chan->fl_pool);
-+err_fd:
-+	dma_pool_destroy(dpaa2_chan->fd_pool);
-+err:
-+	return -ENOMEM;
-+}
-+
-+static void dpaa2_qdma_free_chan_resources(struct dma_chan *chan)
-+{
-+	struct dpaa2_qdma_chan *dpaa2_chan = to_dpaa2_qdma_chan(chan);
-+	struct dpaa2_qdma_engine *dpaa2_qdma = dpaa2_chan->qdma;
-+	unsigned long flags;
-+
-+	LIST_HEAD(head);
-+
-+	spin_lock_irqsave(&dpaa2_chan->vchan.lock, flags);
-+	vchan_get_all_descriptors(&dpaa2_chan->vchan, &head);
-+	spin_unlock_irqrestore(&dpaa2_chan->vchan.lock, flags);
-+
-+	vchan_dma_desc_free_list(&dpaa2_chan->vchan, &head);
-+
-+	dpaa2_dpdmai_free_comp(dpaa2_chan, &dpaa2_chan->comp_used);
-+	dpaa2_dpdmai_free_comp(dpaa2_chan, &dpaa2_chan->comp_free);
-+
-+	dma_pool_destroy(dpaa2_chan->fd_pool);
-+	dma_pool_destroy(dpaa2_chan->fl_pool);
-+	dma_pool_destroy(dpaa2_chan->sdd_pool);
-+	dpaa2_qdma->desc_allocated--;
-+}
-+
-+/*
-+ * Request a command descriptor for enqueue.
-+ */
-+static struct dpaa2_qdma_comp *
-+dpaa2_qdma_request_desc(struct dpaa2_qdma_chan *dpaa2_chan)
-+{
-+	struct dpaa2_qdma_priv *qdma_priv = dpaa2_chan->qdma->priv;
-+	struct device *dev = &qdma_priv->dpdmai_dev->dev;
-+	struct dpaa2_qdma_comp *comp_temp = NULL;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&dpaa2_chan->queue_lock, flags);
-+	if (list_empty(&dpaa2_chan->comp_free)) {
-+		spin_unlock_irqrestore(&dpaa2_chan->queue_lock, flags);
-+		comp_temp = kzalloc(sizeof(*comp_temp), GFP_NOWAIT);
-+		if (!comp_temp)
-+			goto err;
-+		comp_temp->fd_virt_addr =
-+			dma_pool_alloc(dpaa2_chan->fd_pool, GFP_NOWAIT,
-+				       &comp_temp->fd_bus_addr);
-+		if (!comp_temp->fd_virt_addr)
-+			goto err_comp;
-+
-+		comp_temp->fl_virt_addr =
-+			dma_pool_alloc(dpaa2_chan->fl_pool, GFP_NOWAIT,
-+				       &comp_temp->fl_bus_addr);
-+		if (!comp_temp->fl_virt_addr)
-+			goto err_fd_virt;
-+
-+		comp_temp->desc_virt_addr =
-+			dma_pool_alloc(dpaa2_chan->sdd_pool, GFP_NOWAIT,
-+				       &comp_temp->desc_bus_addr);
-+		if (!comp_temp->desc_virt_addr)
-+			goto err_fl_virt;
-+
-+		comp_temp->qchan = dpaa2_chan;
-+		return comp_temp;
-+	}
-+
-+	comp_temp = list_first_entry(&dpaa2_chan->comp_free,
-+				     struct dpaa2_qdma_comp, list);
-+	list_del(&comp_temp->list);
-+	spin_unlock_irqrestore(&dpaa2_chan->queue_lock, flags);
-+
-+	comp_temp->qchan = dpaa2_chan;
-+
-+	return comp_temp;
-+
-+err_fl_virt:
-+		dma_pool_free(dpaa2_chan->fl_pool,
-+			      comp_temp->fl_virt_addr,
-+			      comp_temp->fl_bus_addr);
-+err_fd_virt:
-+		dma_pool_free(dpaa2_chan->fd_pool,
-+			      comp_temp->fd_virt_addr,
-+			      comp_temp->fd_bus_addr);
-+err_comp:
-+	kfree(comp_temp);
-+err:
-+	dev_err(dev, "Failed to request descriptor\n");
-+	return NULL;
-+}
-+
-+static void
-+dpaa2_qdma_populate_fd(u32 format, struct dpaa2_qdma_comp *dpaa2_comp)
-+{
-+	struct dpaa2_fd *fd;
-+
-+	fd = dpaa2_comp->fd_virt_addr;
-+	memset(fd, 0, sizeof(struct dpaa2_fd));
-+
-+	/* fd populated */
-+	dpaa2_fd_set_addr(fd, dpaa2_comp->fl_bus_addr);
-+
-+	/*
-+	 * Bypass memory translation, Frame list format, short length disable
-+	 * we need to disable BMT if fsl-mc use iova addr
-+	 */
-+	if (smmu_disable)
-+		dpaa2_fd_set_bpid(fd, QMAN_FD_BMT_ENABLE);
-+	dpaa2_fd_set_format(fd, QMAN_FD_FMT_ENABLE | QMAN_FD_SL_DISABLE);
-+
-+	dpaa2_fd_set_frc(fd, format | QDMA_SER_CTX);
-+}
-+
-+/* first frame list for descriptor buffer */
-+static void
-+dpaa2_qdma_populate_first_framel(struct dpaa2_fl_entry *f_list,
-+				 struct dpaa2_qdma_comp *dpaa2_comp,
-+				 bool wrt_changed)
-+{
-+	struct dpaa2_qdma_sd_d *sdd;
-+
-+	sdd = dpaa2_comp->desc_virt_addr;
-+	memset(sdd, 0, 2 * (sizeof(*sdd)));
-+
-+	/* source descriptor CMD */
-+	sdd->cmd = cpu_to_le32(QDMA_SD_CMD_RDTTYPE_COHERENT);
-+	sdd++;
-+
-+	/* dest descriptor CMD */
-+	if (wrt_changed)
-+		sdd->cmd = cpu_to_le32(LX2160_QDMA_DD_CMD_WRTTYPE_COHERENT);
-+	else
-+		sdd->cmd = cpu_to_le32(QDMA_DD_CMD_WRTTYPE_COHERENT);
-+
-+	memset(f_list, 0, sizeof(struct dpaa2_fl_entry));
-+
-+	/* first frame list to source descriptor */
-+	dpaa2_fl_set_addr(f_list, dpaa2_comp->desc_bus_addr);
-+	dpaa2_fl_set_len(f_list, 0x20);
-+	dpaa2_fl_set_format(f_list, QDMA_FL_FMT_SBF | QDMA_FL_SL_LONG);
-+
-+	/* bypass memory translation */
-+	if (smmu_disable)
-+		f_list->bpid = cpu_to_le16(QDMA_FL_BMT_ENABLE);
-+}
-+
-+/* source and destination frame list */
-+static void
-+dpaa2_qdma_populate_frames(struct dpaa2_fl_entry *f_list,
-+			   dma_addr_t dst, dma_addr_t src,
-+			   size_t len, uint8_t fmt)
-+{
-+	/* source frame list to source buffer */
-+	memset(f_list, 0, sizeof(struct dpaa2_fl_entry));
-+
-+	dpaa2_fl_set_addr(f_list, src);
-+	dpaa2_fl_set_len(f_list, len);
-+
-+	/* single buffer frame or scatter gather frame */
-+	dpaa2_fl_set_format(f_list, (fmt | QDMA_FL_SL_LONG));
-+
-+	/* bypass memory translation */
-+	if (smmu_disable)
-+		f_list->bpid = cpu_to_le16(QDMA_FL_BMT_ENABLE);
-+
-+	f_list++;
-+
-+	/* destination frame list to destination buffer */
-+	memset(f_list, 0, sizeof(struct dpaa2_fl_entry));
-+
-+	dpaa2_fl_set_addr(f_list, dst);
-+	dpaa2_fl_set_len(f_list, len);
-+	dpaa2_fl_set_format(f_list, (fmt | QDMA_FL_SL_LONG));
-+	/* single buffer frame or scatter gather frame */
-+	dpaa2_fl_set_final(f_list, QDMA_FL_F);
-+	/* bypass memory translation */
-+	if (smmu_disable)
-+		f_list->bpid = cpu_to_le16(QDMA_FL_BMT_ENABLE);
-+}
-+
-+static struct dma_async_tx_descriptor
-+*dpaa2_qdma_prep_memcpy(struct dma_chan *chan, dma_addr_t dst,
-+			dma_addr_t src, size_t len, ulong flags)
-+{
-+	struct dpaa2_qdma_chan *dpaa2_chan = to_dpaa2_qdma_chan(chan);
-+	struct dpaa2_qdma_engine *dpaa2_qdma;
-+	struct dpaa2_qdma_comp *dpaa2_comp;
-+	struct dpaa2_fl_entry *f_list;
-+	bool wrt_changed;
-+
-+	dpaa2_qdma = dpaa2_chan->qdma;
-+	dpaa2_comp = dpaa2_qdma_request_desc(dpaa2_chan);
-+	if (!dpaa2_comp)
-+		return NULL;
-+
-+	wrt_changed = (bool)dpaa2_qdma->qdma_wrtype_fixup;
-+
-+	/* populate Frame descriptor */
-+	dpaa2_qdma_populate_fd(QDMA_FD_LONG_FORMAT, dpaa2_comp);
-+
-+	f_list = dpaa2_comp->fl_virt_addr;
-+
-+	/* first frame list for descriptor buffer (logn format) */
-+	dpaa2_qdma_populate_first_framel(f_list, dpaa2_comp, wrt_changed);
-+
-+	f_list++;
-+
-+	dpaa2_qdma_populate_frames(f_list, dst, src, len, QDMA_FL_FMT_SBF);
-+
-+	return vchan_tx_prep(&dpaa2_chan->vchan, &dpaa2_comp->vdesc, flags);
-+}
-+
-+static void dpaa2_qdma_issue_pending(struct dma_chan *chan)
-+{
-+	struct dpaa2_qdma_chan *dpaa2_chan = to_dpaa2_qdma_chan(chan);
-+	struct dpaa2_qdma_comp *dpaa2_comp;
-+	struct virt_dma_desc *vdesc;
-+	struct dpaa2_fd *fd;
-+	unsigned long flags;
-+	int err;
-+
-+	spin_lock_irqsave(&dpaa2_chan->queue_lock, flags);
-+	spin_lock(&dpaa2_chan->vchan.lock);
-+	if (vchan_issue_pending(&dpaa2_chan->vchan)) {
-+		vdesc = vchan_next_desc(&dpaa2_chan->vchan);
-+		if (!vdesc)
-+			goto err_enqueue;
-+		dpaa2_comp = to_fsl_qdma_comp(vdesc);
-+
-+		fd = dpaa2_comp->fd_virt_addr;
-+
-+		list_del(&vdesc->node);
-+		list_add_tail(&dpaa2_comp->list, &dpaa2_chan->comp_used);
-+
-+		err = dpaa2_io_service_enqueue_fq(NULL, dpaa2_chan->fqid, fd);
-+		if (err) {
-+			list_del(&dpaa2_comp->list);
-+			list_add_tail(&dpaa2_comp->list,
-+				      &dpaa2_chan->comp_free);
-+		}
-+	}
-+err_enqueue:
-+	spin_unlock(&dpaa2_chan->vchan.lock);
-+	spin_unlock_irqrestore(&dpaa2_chan->queue_lock, flags);
-+}
-+
-+static int __cold dpaa2_qdma_setup(struct fsl_mc_device *ls_dev)
-+{
-+	struct dpaa2_qdma_priv_per_prio *ppriv;
-+	struct device *dev = &ls_dev->dev;
-+	struct dpaa2_qdma_priv *priv;
-+	u8 prio_def = DPDMAI_PRIO_NUM;
-+	int err = -EINVAL;
-+	int i;
-+
-+	priv = dev_get_drvdata(dev);
-+
-+	priv->dev = dev;
-+	priv->dpqdma_id = ls_dev->obj_desc.id;
-+
-+	/* Get the handle for the DPDMAI this interface is associate with */
-+	err = dpdmai_open(priv->mc_io, 0, priv->dpqdma_id, &ls_dev->mc_handle);
-+	if (err) {
-+		dev_err(dev, "dpdmai_open() failed\n");
-+		return err;
-+	}
-+
-+	dev_dbg(dev, "Opened dpdmai object successfully\n");
-+
-+	err = dpdmai_get_attributes(priv->mc_io, 0, ls_dev->mc_handle,
-+				    &priv->dpdmai_attr);
-+	if (err) {
-+		dev_err(dev, "dpdmai_get_attributes() failed\n");
-+		goto exit;
-+	}
-+
-+	if (priv->dpdmai_attr.version.major > DPDMAI_VER_MAJOR) {
-+		dev_err(dev, "DPDMAI major version mismatch\n"
-+			     "Found %u.%u, supported version is %u.%u\n",
-+				priv->dpdmai_attr.version.major,
-+				priv->dpdmai_attr.version.minor,
-+				DPDMAI_VER_MAJOR, DPDMAI_VER_MINOR);
-+		goto exit;
-+	}
-+
-+	if (priv->dpdmai_attr.version.minor > DPDMAI_VER_MINOR) {
-+		dev_err(dev, "DPDMAI minor version mismatch\n"
-+			     "Found %u.%u, supported version is %u.%u\n",
-+				priv->dpdmai_attr.version.major,
-+				priv->dpdmai_attr.version.minor,
-+				DPDMAI_VER_MAJOR, DPDMAI_VER_MINOR);
-+		goto exit;
-+	}
-+
-+	priv->num_pairs = min(priv->dpdmai_attr.num_of_priorities, prio_def);
-+	ppriv = kcalloc(priv->num_pairs, sizeof(*ppriv), GFP_KERNEL);
-+	if (!ppriv) {
-+		err = -ENOMEM;
-+		goto exit;
-+	}
-+	priv->ppriv = ppriv;
-+
-+	for (i = 0; i < priv->num_pairs; i++) {
-+		err = dpdmai_get_rx_queue(priv->mc_io, 0, ls_dev->mc_handle,
-+					  i, &priv->rx_queue_attr[i]);
-+		if (err) {
-+			dev_err(dev, "dpdmai_get_rx_queue() failed\n");
-+			goto exit;
-+		}
-+		ppriv->rsp_fqid = priv->rx_queue_attr[i].fqid;
-+
-+		err = dpdmai_get_tx_queue(priv->mc_io, 0, ls_dev->mc_handle,
-+					  i, &priv->tx_fqid[i]);
-+		if (err) {
-+			dev_err(dev, "dpdmai_get_tx_queue() failed\n");
-+			goto exit;
-+		}
-+		ppriv->req_fqid = priv->tx_fqid[i];
-+		ppriv->prio = i;
-+		ppriv->priv = priv;
-+		ppriv++;
-+	}
-+
-+	return 0;
-+exit:
-+	dpdmai_close(priv->mc_io, 0, ls_dev->mc_handle);
-+	return err;
-+}
-+
-+static void dpaa2_qdma_fqdan_cb(struct dpaa2_io_notification_ctx *ctx)
-+{
-+	struct dpaa2_qdma_priv_per_prio *ppriv = container_of(ctx,
-+			struct dpaa2_qdma_priv_per_prio, nctx);
-+	struct dpaa2_qdma_comp *dpaa2_comp, *_comp_tmp;
-+	struct dpaa2_qdma_priv *priv = ppriv->priv;
-+	u32 n_chans = priv->dpaa2_qdma->n_chans;
-+	struct dpaa2_qdma_chan *qchan;
-+	const struct dpaa2_fd *fd_eq;
-+	const struct dpaa2_fd *fd;
-+	struct dpaa2_dq *dq;
-+	int is_last = 0;
-+	int found;
-+	u8 status;
-+	int err;
-+	int i;
-+
-+	do {
-+		err = dpaa2_io_service_pull_fq(NULL, ppriv->rsp_fqid,
-+					       ppriv->store);
-+	} while (err);
-+
-+	while (!is_last) {
-+		do {
-+			dq = dpaa2_io_store_next(ppriv->store, &is_last);
-+		} while (!is_last && !dq);
-+		if (!dq) {
-+			dev_err(priv->dev, "FQID returned no valid frames!\n");
-+			continue;
-+		}
-+
-+		/* obtain FD and process the error */
-+		fd = dpaa2_dq_fd(dq);
-+
-+		status = dpaa2_fd_get_ctrl(fd) & 0xff;
-+		if (status)
-+			dev_err(priv->dev, "FD error occurred\n");
-+		found = 0;
-+		for (i = 0; i < n_chans; i++) {
-+			qchan = &priv->dpaa2_qdma->chans[i];
-+			spin_lock(&qchan->queue_lock);
-+			if (list_empty(&qchan->comp_used)) {
-+				spin_unlock(&qchan->queue_lock);
-+				continue;
-+			}
-+			list_for_each_entry_safe(dpaa2_comp, _comp_tmp,
-+						 &qchan->comp_used, list) {
-+				fd_eq = dpaa2_comp->fd_virt_addr;
-+
-+				if (le64_to_cpu(fd_eq->simple.addr) ==
-+				    le64_to_cpu(fd->simple.addr)) {
-+					spin_lock(&qchan->vchan.lock);
-+					vchan_cookie_complete(&
-+							dpaa2_comp->vdesc);
-+					spin_unlock(&qchan->vchan.lock);
-+					found = 1;
-+					break;
-+				}
-+			}
-+			spin_unlock(&qchan->queue_lock);
-+			if (found)
-+				break;
-+		}
-+	}
-+
-+	dpaa2_io_service_rearm(NULL, ctx);
-+}
-+
-+static int __cold dpaa2_qdma_dpio_setup(struct dpaa2_qdma_priv *priv)
-+{
-+	struct dpaa2_qdma_priv_per_prio *ppriv;
-+	struct device *dev = priv->dev;
-+	int err = -EINVAL;
-+	int i, num;
-+
-+	num = priv->num_pairs;
-+	ppriv = priv->ppriv;
-+	for (i = 0; i < num; i++) {
-+		ppriv->nctx.is_cdan = 0;
-+		ppriv->nctx.desired_cpu = DPAA2_IO_ANY_CPU;
-+		ppriv->nctx.id = ppriv->rsp_fqid;
-+		ppriv->nctx.cb = dpaa2_qdma_fqdan_cb;
-+		err = dpaa2_io_service_register(NULL, &ppriv->nctx, dev);
-+		if (err) {
-+			dev_err(dev, "Notification register failed\n");
-+			goto err_service;
-+		}
-+
-+		ppriv->store =
-+			dpaa2_io_store_create(DPAA2_QDMA_STORE_SIZE, dev);
-+		if (!ppriv->store) {
-+			dev_err(dev, "dpaa2_io_store_create() failed\n");
-+			goto err_store;
-+		}
-+
-+		ppriv++;
-+	}
-+	return 0;
-+
-+err_store:
-+	dpaa2_io_service_deregister(NULL, &ppriv->nctx, dev);
-+err_service:
-+	ppriv--;
-+	while (ppriv >= priv->ppriv) {
-+		dpaa2_io_service_deregister(NULL, &ppriv->nctx, dev);
-+		dpaa2_io_store_destroy(ppriv->store);
-+		ppriv--;
-+	}
-+	return err;
-+}
-+
-+static void dpaa2_dpmai_store_free(struct dpaa2_qdma_priv *priv)
-+{
-+	struct dpaa2_qdma_priv_per_prio *ppriv = priv->ppriv;
-+	int i;
-+
-+	for (i = 0; i < priv->num_pairs; i++) {
-+		dpaa2_io_store_destroy(ppriv->store);
-+		ppriv++;
-+	}
-+}
-+
-+static void dpaa2_dpdmai_dpio_free(struct dpaa2_qdma_priv *priv)
-+{
-+	struct dpaa2_qdma_priv_per_prio *ppriv = priv->ppriv;
-+	struct device *dev = priv->dev;
-+	int i;
-+
-+	for (i = 0; i < priv->num_pairs; i++) {
-+		dpaa2_io_service_deregister(NULL, &ppriv->nctx, dev);
-+		ppriv++;
-+	}
-+}
-+
-+static int __cold dpaa2_dpdmai_bind(struct dpaa2_qdma_priv *priv)
-+{
-+	struct dpdmai_rx_queue_cfg rx_queue_cfg;
-+	struct dpaa2_qdma_priv_per_prio *ppriv;
-+	struct device *dev = priv->dev;
-+	struct fsl_mc_device *ls_dev;
-+	int i, num;
-+	int err;
-+
-+	ls_dev = to_fsl_mc_device(dev);
-+	num = priv->num_pairs;
-+	ppriv = priv->ppriv;
-+	for (i = 0; i < num; i++) {
-+		rx_queue_cfg.options = DPDMAI_QUEUE_OPT_USER_CTX |
-+					DPDMAI_QUEUE_OPT_DEST;
-+		rx_queue_cfg.user_ctx = ppriv->nctx.qman64;
-+		rx_queue_cfg.dest_cfg.dest_type = DPDMAI_DEST_DPIO;
-+		rx_queue_cfg.dest_cfg.dest_id = ppriv->nctx.dpio_id;
-+		rx_queue_cfg.dest_cfg.priority = ppriv->prio;
-+		err = dpdmai_set_rx_queue(priv->mc_io, 0, ls_dev->mc_handle,
-+					  rx_queue_cfg.dest_cfg.priority,
-+					  &rx_queue_cfg);
-+		if (err) {
-+			dev_err(dev, "dpdmai_set_rx_queue() failed\n");
-+			return err;
-+		}
-+
-+		ppriv++;
-+	}
-+
-+	return 0;
-+}
-+
-+static int __cold dpaa2_dpdmai_dpio_unbind(struct dpaa2_qdma_priv *priv)
-+{
-+	struct dpaa2_qdma_priv_per_prio *ppriv = priv->ppriv;
-+	struct device *dev = priv->dev;
-+	struct fsl_mc_device *ls_dev;
-+	int err = 0;
-+	int i;
-+
-+	ls_dev = to_fsl_mc_device(dev);
-+
-+	for (i = 0; i < priv->num_pairs; i++) {
-+		ppriv->nctx.qman64 = 0;
-+		ppriv->nctx.dpio_id = 0;
-+		ppriv++;
-+	}
-+
-+	err = dpdmai_reset(priv->mc_io, 0, ls_dev->mc_handle);
-+	if (err)
-+		dev_err(dev, "dpdmai_reset() failed\n");
-+
-+	return err;
-+}
-+
-+static void dpaa2_dpdmai_free_comp(struct dpaa2_qdma_chan *qchan,
-+				   struct list_head *head)
-+{
-+	struct dpaa2_qdma_comp *comp_tmp, *_comp_tmp;
-+	unsigned long flags;
-+
-+	list_for_each_entry_safe(comp_tmp, _comp_tmp,
-+				 head, list) {
-+		spin_lock_irqsave(&qchan->queue_lock, flags);
-+		list_del(&comp_tmp->list);
-+		spin_unlock_irqrestore(&qchan->queue_lock, flags);
-+		dma_pool_free(qchan->fd_pool,
-+			      comp_tmp->fd_virt_addr,
-+			      comp_tmp->fd_bus_addr);
-+		dma_pool_free(qchan->fl_pool,
-+			      comp_tmp->fl_virt_addr,
-+			      comp_tmp->fl_bus_addr);
-+		dma_pool_free(qchan->sdd_pool,
-+			      comp_tmp->desc_virt_addr,
-+			      comp_tmp->desc_bus_addr);
-+		kfree(comp_tmp);
-+	}
-+}
-+
-+static void dpaa2_dpdmai_free_channels(struct dpaa2_qdma_engine *dpaa2_qdma)
-+{
-+	struct dpaa2_qdma_chan *qchan;
-+	int num, i;
-+
-+	num = dpaa2_qdma->n_chans;
-+	for (i = 0; i < num; i++) {
-+		qchan = &dpaa2_qdma->chans[i];
-+		dpaa2_dpdmai_free_comp(qchan, &qchan->comp_used);
-+		dpaa2_dpdmai_free_comp(qchan, &qchan->comp_free);
-+		dma_pool_destroy(qchan->fd_pool);
-+		dma_pool_destroy(qchan->fl_pool);
-+		dma_pool_destroy(qchan->sdd_pool);
-+	}
-+}
-+
-+static void dpaa2_qdma_free_desc(struct virt_dma_desc *vdesc)
-+{
-+	struct dpaa2_qdma_comp *dpaa2_comp;
-+	struct dpaa2_qdma_chan *qchan;
-+	unsigned long flags;
-+
-+	dpaa2_comp = to_fsl_qdma_comp(vdesc);
-+	qchan = dpaa2_comp->qchan;
-+	spin_lock_irqsave(&qchan->queue_lock, flags);
-+	list_del(&dpaa2_comp->list);
-+	list_add_tail(&dpaa2_comp->list, &qchan->comp_free);
-+	spin_unlock_irqrestore(&qchan->queue_lock, flags);
-+}
-+
-+static int dpaa2_dpdmai_init_channels(struct dpaa2_qdma_engine *dpaa2_qdma)
-+{
-+	struct dpaa2_qdma_priv *priv = dpaa2_qdma->priv;
-+	struct dpaa2_qdma_chan *dpaa2_chan;
-+	int num = priv->num_pairs;
-+	int i;
-+
-+	INIT_LIST_HEAD(&dpaa2_qdma->dma_dev.channels);
-+	for (i = 0; i < dpaa2_qdma->n_chans; i++) {
-+		dpaa2_chan = &dpaa2_qdma->chans[i];
-+		dpaa2_chan->qdma = dpaa2_qdma;
-+		dpaa2_chan->fqid = priv->tx_fqid[i % num];
-+		dpaa2_chan->vchan.desc_free = dpaa2_qdma_free_desc;
-+		vchan_init(&dpaa2_chan->vchan, &dpaa2_qdma->dma_dev);
-+		spin_lock_init(&dpaa2_chan->queue_lock);
-+		INIT_LIST_HEAD(&dpaa2_chan->comp_used);
-+		INIT_LIST_HEAD(&dpaa2_chan->comp_free);
-+	}
-+	return 0;
-+}
-+
-+static int dpaa2_qdma_probe(struct fsl_mc_device *dpdmai_dev)
-+{
-+	struct device *dev = &dpdmai_dev->dev;
-+	struct dpaa2_qdma_engine *dpaa2_qdma;
-+	struct dpaa2_qdma_priv *priv;
-+	int err;
-+
-+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+	dev_set_drvdata(dev, priv);
-+	priv->dpdmai_dev = dpdmai_dev;
-+
-+	priv->iommu_domain = iommu_get_domain_for_dev(dev);
-+	if (priv->iommu_domain)
-+		smmu_disable = false;
-+
-+	/* obtain a MC portal */
-+	err = fsl_mc_portal_allocate(dpdmai_dev, 0, &priv->mc_io);
-+	if (err) {
-+		if (err == -ENXIO)
-+			err = -EPROBE_DEFER;
-+		else
-+			dev_err(dev, "MC portal allocation failed\n");
-+		goto err_mcportal;
-+	}
-+
-+	/* DPDMAI initialization */
-+	err = dpaa2_qdma_setup(dpdmai_dev);
-+	if (err) {
-+		dev_err(dev, "dpaa2_dpdmai_setup() failed\n");
-+		goto err_dpdmai_setup;
-+	}
-+
-+	/* DPIO */
-+	err = dpaa2_qdma_dpio_setup(priv);
-+	if (err) {
-+		dev_err(dev, "dpaa2_dpdmai_dpio_setup() failed\n");
-+		goto err_dpio_setup;
-+	}
-+
-+	/* DPDMAI binding to DPIO */
-+	err = dpaa2_dpdmai_bind(priv);
-+	if (err) {
-+		dev_err(dev, "dpaa2_dpdmai_bind() failed\n");
-+		goto err_bind;
-+	}
-+
-+	/* DPDMAI enable */
-+	err = dpdmai_enable(priv->mc_io, 0, dpdmai_dev->mc_handle);
-+	if (err) {
-+		dev_err(dev, "dpdmai_enable() faile\n");
-+		goto err_enable;
-+	}
-+
-+	dpaa2_qdma = kzalloc(sizeof(*dpaa2_qdma), GFP_KERNEL);
-+	if (!dpaa2_qdma) {
-+		err = -ENOMEM;
-+		goto err_eng;
-+	}
-+
-+	priv->dpaa2_qdma = dpaa2_qdma;
-+	dpaa2_qdma->priv = priv;
-+
-+	dpaa2_qdma->desc_allocated = 0;
-+	dpaa2_qdma->n_chans = NUM_CH;
-+
-+	dpaa2_dpdmai_init_channels(dpaa2_qdma);
-+
-+	if (soc_device_match(soc_fixup_tuning))
-+		dpaa2_qdma->qdma_wrtype_fixup = true;
-+	else
-+		dpaa2_qdma->qdma_wrtype_fixup = false;
-+
-+	dma_cap_set(DMA_PRIVATE, dpaa2_qdma->dma_dev.cap_mask);
-+	dma_cap_set(DMA_SLAVE, dpaa2_qdma->dma_dev.cap_mask);
-+	dma_cap_set(DMA_MEMCPY, dpaa2_qdma->dma_dev.cap_mask);
-+
-+	dpaa2_qdma->dma_dev.dev = dev;
-+	dpaa2_qdma->dma_dev.device_alloc_chan_resources =
-+		dpaa2_qdma_alloc_chan_resources;
-+	dpaa2_qdma->dma_dev.device_free_chan_resources =
-+		dpaa2_qdma_free_chan_resources;
-+	dpaa2_qdma->dma_dev.device_tx_status = dma_cookie_status;
-+	dpaa2_qdma->dma_dev.device_prep_dma_memcpy = dpaa2_qdma_prep_memcpy;
-+	dpaa2_qdma->dma_dev.device_issue_pending = dpaa2_qdma_issue_pending;
-+
-+	err = dma_async_device_register(&dpaa2_qdma->dma_dev);
-+	if (err) {
-+		dev_err(dev, "Can't register NXP QDMA engine.\n");
-+		goto err_dpaa2_qdma;
-+	}
-+
-+	return 0;
-+
-+err_dpaa2_qdma:
-+	kfree(dpaa2_qdma);
-+err_eng:
-+	dpdmai_disable(priv->mc_io, 0, dpdmai_dev->mc_handle);
-+err_enable:
-+	dpaa2_dpdmai_dpio_unbind(priv);
-+err_bind:
-+	dpaa2_dpmai_store_free(priv);
-+	dpaa2_dpdmai_dpio_free(priv);
-+err_dpio_setup:
-+	kfree(priv->ppriv);
-+	dpdmai_close(priv->mc_io, 0, dpdmai_dev->mc_handle);
-+err_dpdmai_setup:
-+	fsl_mc_portal_free(priv->mc_io);
-+err_mcportal:
-+	kfree(priv);
-+	dev_set_drvdata(dev, NULL);
-+	return err;
-+}
-+
-+static int dpaa2_qdma_remove(struct fsl_mc_device *ls_dev)
-+{
-+	struct dpaa2_qdma_engine *dpaa2_qdma;
-+	struct dpaa2_qdma_priv *priv;
-+	struct device *dev;
-+
-+	dev = &ls_dev->dev;
-+	priv = dev_get_drvdata(dev);
-+	dpaa2_qdma = priv->dpaa2_qdma;
-+
-+	dpdmai_disable(priv->mc_io, 0, ls_dev->mc_handle);
-+	dpaa2_dpdmai_dpio_unbind(priv);
-+	dpaa2_dpmai_store_free(priv);
-+	dpaa2_dpdmai_dpio_free(priv);
-+	dpdmai_close(priv->mc_io, 0, ls_dev->mc_handle);
-+	fsl_mc_portal_free(priv->mc_io);
-+	dev_set_drvdata(dev, NULL);
-+	dpaa2_dpdmai_free_channels(dpaa2_qdma);
-+
-+	dma_async_device_unregister(&dpaa2_qdma->dma_dev);
-+	kfree(priv);
-+	kfree(dpaa2_qdma);
-+
-+	return 0;
-+}
-+
-+static const struct fsl_mc_device_id dpaa2_qdma_id_table[] = {
-+	{
-+		.vendor = FSL_MC_VENDOR_FREESCALE,
-+		.obj_type = "dpdmai",
-+	},
-+	{ .vendor = 0x0 }
-+};
-+
-+static struct fsl_mc_driver dpaa2_qdma_driver = {
-+	.driver		= {
-+		.name	= "dpaa2-qdma",
-+		.owner  = THIS_MODULE,
-+	},
-+	.probe          = dpaa2_qdma_probe,
-+	.remove		= dpaa2_qdma_remove,
-+	.match_id_table	= dpaa2_qdma_id_table
-+};
-+
-+static int __init dpaa2_qdma_driver_init(void)
-+{
-+	return fsl_mc_driver_register(&(dpaa2_qdma_driver));
-+}
-+late_initcall(dpaa2_qdma_driver_init);
-+
-+static void __exit fsl_qdma_exit(void)
-+{
-+	fsl_mc_driver_unregister(&(dpaa2_qdma_driver));
-+}
-+module_exit(fsl_qdma_exit);
-+
-+MODULE_ALIAS("platform:fsl-dpaa2-qdma");
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("NXP Layerscape DPAA2 qDMA engine driver");
---- /dev/null
-+++ b/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.h
-@@ -0,0 +1,153 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/* Copyright 2019 NXP */
-+
-+#ifndef __DPAA2_QDMA_H
-+#define __DPAA2_QDMA_H
-+
-+#define DPAA2_QDMA_STORE_SIZE 16
-+#define NUM_CH 8
-+
-+struct dpaa2_qdma_sd_d {
-+	u32 rsv:32;
-+	union {
-+		struct {
-+			u32 ssd:12; /* souce stride distance */
-+			u32 sss:12; /* souce stride size */
-+			u32 rsv1:8;
-+		} sdf;
-+		struct {
-+			u32 dsd:12; /* Destination stride distance */
-+			u32 dss:12; /* Destination stride size */
-+			u32 rsv2:8;
-+		} ddf;
-+	} df;
-+	u32 rbpcmd;	/* Route-by-port command */
-+	u32 cmd;
-+} __attribute__((__packed__));
-+
-+/* Source descriptor command read transaction type for RBP=0: */
-+/* coherent copy of cacheable memory */
-+#define QDMA_SD_CMD_RDTTYPE_COHERENT (0xb << 28)
-+/* Destination descriptor command write transaction type for RBP=0: */
-+/* coherent copy of cacheable memory */
-+#define QDMA_DD_CMD_WRTTYPE_COHERENT (0x6 << 28)
-+#define LX2160_QDMA_DD_CMD_WRTTYPE_COHERENT (0xb << 28)
-+
-+#define QMAN_FD_FMT_ENABLE	BIT(0) /* frame list table enable */
-+#define QMAN_FD_BMT_ENABLE	BIT(15) /* bypass memory translation */
-+#define QMAN_FD_BMT_DISABLE	(0) /* bypass memory translation */
-+#define QMAN_FD_SL_DISABLE	(0) /* short lengthe disabled */
-+#define QMAN_FD_SL_ENABLE	BIT(14) /* short lengthe enabled */
-+
-+#define QDMA_FINAL_BIT_DISABLE	(0) /* final bit disable */
-+#define QDMA_FINAL_BIT_ENABLE	BIT(31) /* final bit enable */
-+
-+#define QDMA_FD_SHORT_FORMAT	BIT(11) /* short format */
-+#define QDMA_FD_LONG_FORMAT	(0) /* long format */
-+#define QDMA_SER_DISABLE	(8) /* no notification */
-+#define QDMA_SER_CTX		BIT(8) /* notification by FQD_CTX[fqid] */
-+#define QDMA_SER_DEST		(2 << 8) /* notification by destination desc */
-+#define QDMA_SER_BOTH		(3 << 8) /* soruce and dest notification */
-+#define QDMA_FD_SPF_ENALBE	BIT(30) /* source prefetch enable */
-+
-+#define QMAN_FD_VA_ENABLE	BIT(14) /* Address used is virtual address */
-+#define QMAN_FD_VA_DISABLE	(0)/* Address used is a real address */
-+/* Flow Context: 49bit physical address */
-+#define QMAN_FD_CBMT_ENABLE	BIT(15)
-+#define QMAN_FD_CBMT_DISABLE	(0) /* Flow Context: 64bit virtual address */
-+#define QMAN_FD_SC_DISABLE	(0) /* stashing control */
-+
-+#define QDMA_FL_FMT_SBF		(0x0) /* Single buffer frame */
-+#define QDMA_FL_FMT_SGE		(0x2) /* Scatter gather frame */
-+#define QDMA_FL_BMT_ENABLE	BIT(15) /* enable bypass memory translation */
-+#define QDMA_FL_BMT_DISABLE	(0x0) /* enable bypass memory translation */
-+#define QDMA_FL_SL_LONG		(0x0)/* long length */
-+#define QDMA_FL_SL_SHORT	(0x1) /* short length */
-+#define QDMA_FL_F		(0x1)/* last frame list bit */
-+
-+/*Description of Frame list table structure*/
-+struct dpaa2_qdma_chan {
-+	struct dpaa2_qdma_engine	*qdma;
-+	struct virt_dma_chan		vchan;
-+	struct virt_dma_desc		vdesc;
-+	enum dma_status			status;
-+	u32				fqid;
-+
-+	/* spinlock used by dpaa2 qdma driver */
-+	spinlock_t			queue_lock;
-+	struct dma_pool			*fd_pool;
-+	struct dma_pool			*fl_pool;
-+	struct dma_pool			*sdd_pool;
-+
-+	struct list_head		comp_used;
-+	struct list_head		comp_free;
-+
-+};
-+
-+struct dpaa2_qdma_comp {
-+	dma_addr_t		fd_bus_addr;
-+	dma_addr_t		fl_bus_addr;
-+	dma_addr_t		desc_bus_addr;
-+	struct dpaa2_fd		*fd_virt_addr;
-+	struct dpaa2_fl_entry	*fl_virt_addr;
-+	struct dpaa2_qdma_sd_d	*desc_virt_addr;
-+	struct dpaa2_qdma_chan	*qchan;
-+	struct virt_dma_desc	vdesc;
-+	struct list_head	list;
-+};
-+
-+struct dpaa2_qdma_engine {
-+	struct dma_device	dma_dev;
-+	u32			n_chans;
-+	struct dpaa2_qdma_chan	chans[NUM_CH];
-+	int			qdma_wrtype_fixup;
-+	int			desc_allocated;
-+
-+	struct dpaa2_qdma_priv *priv;
-+};
-+
-+/*
-+ * dpaa2_qdma_priv - driver private data
-+ */
-+struct dpaa2_qdma_priv {
-+	int dpqdma_id;
-+
-+	struct iommu_domain	*iommu_domain;
-+	struct dpdmai_attr	dpdmai_attr;
-+	struct device		*dev;
-+	struct fsl_mc_io	*mc_io;
-+	struct fsl_mc_device	*dpdmai_dev;
-+	u8			num_pairs;
-+
-+	struct dpaa2_qdma_engine	*dpaa2_qdma;
-+	struct dpaa2_qdma_priv_per_prio	*ppriv;
-+
-+	struct dpdmai_rx_queue_attr rx_queue_attr[DPDMAI_PRIO_NUM];
-+	u32 tx_fqid[DPDMAI_PRIO_NUM];
-+};
-+
-+struct dpaa2_qdma_priv_per_prio {
-+	int req_fqid;
-+	int rsp_fqid;
-+	int prio;
-+
-+	struct dpaa2_io_store *store;
-+	struct dpaa2_io_notification_ctx nctx;
-+
-+	struct dpaa2_qdma_priv *priv;
-+};
-+
-+static struct soc_device_attribute soc_fixup_tuning[] = {
-+	{ .family = "QorIQ LX2160A"},
-+	{ },
-+};
-+
-+/* FD pool size: one FD + 3 Frame list + 2 source/destination descriptor */
-+#define FD_POOL_SIZE (sizeof(struct dpaa2_fd) + \
-+		sizeof(struct dpaa2_fl_entry) * 3 + \
-+		sizeof(struct dpaa2_qdma_sd_d) * 2)
-+
-+static void dpaa2_dpdmai_free_channels(struct dpaa2_qdma_engine *dpaa2_qdma);
-+static void dpaa2_dpdmai_free_comp(struct dpaa2_qdma_chan *qchan,
-+				   struct list_head *head);
-+#endif /* __DPAA2_QDMA_H */
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0003-MLK-14610-DMA-fsl-edma-v3-add-fsl-edma-v3-support.patch b/target/linux/layerscape/patches-5.4/806-dma-0003-MLK-14610-DMA-fsl-edma-v3-add-fsl-edma-v3-support.patch
deleted file mode 100644
index 780d3c89e2..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0003-MLK-14610-DMA-fsl-edma-v3-add-fsl-edma-v3-support.patch
+++ /dev/null
@@ -1,1008 +0,0 @@
-From 88476b7fb025afdf9cc2247e8d04ab8e027ce9cb Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Fri, 31 Mar 2017 15:53:39 +0800
-Subject: [PATCH] MLK-14610 DMA: fsl-edma-v3: add fsl-edma-v3 support
-
-Add edma-v3 driver on i.mx8qm.
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-(cherry picked from commit d0ac0971c2e637ebddc853f12f71d130f5df4f91)
----
- .../devicetree/bindings/dma/fsl-edma-v3.txt        |  64 ++
- drivers/dma/Kconfig                                |  11 +
- drivers/dma/Makefile                               |   1 +
- drivers/dma/fsl-edma-v3.c                          | 890 +++++++++++++++++++++
- 4 files changed, 966 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/dma/fsl-edma-v3.txt
- create mode 100644 drivers/dma/fsl-edma-v3.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/dma/fsl-edma-v3.txt
-@@ -0,0 +1,64 @@
-+* Freescale enhanced Direct Memory Access(eDMA-v3) Controller
-+
-+  The eDMA-v3 controller is inherited from FSL eDMA, and firstly is intergrated
-+  on Freescale i.MX8QM SOC chip. The eDMA channels have multiplex capability by
-+  programmble memory-mapped registers. Specific DMA request source has fixed channel.
-+
-+* eDMA Controller
-+Required properties:
-+- compatible :
-+	- "fsl,imx8qm-edma" for eDMA used similar to that on i.MX8QM SoC
-+	- "fsl,imx8qm-adma" for audio eDMA used on i.MX8QM
-+- reg : Specifies base physical address(s) and size of the eDMA channel registers.
-+	Each eDMA channel has separated register's address and size.
-+- interrupts : A list of interrupt-specifiers, each channel has one interrupt.
-+- interrupt-names : Should contain:
-+	"edma-chan12-tx" - the channel12 transmission interrupt
-+- #dma-cells : Must be <3>.
-+	The 1st cell specifies the channel ID.
-+	The 2nd cell specifies the channel priority.
-+	The 3rd cell specifies the channel type like for transmit or receive:
-+		0: transmit, 1: receive.
-+	See the SoC's reference manual for all the supported request sources.
-+- dma-channels : Number of channels supported by the controller
-+
-+Examples:
-+edma0: dma-controller@40018000 {
-+	compatible = "fsl,imx8qm-edma";
-+	reg = <0x0 0x5a2c0000 0x0 0x10000>, /* channel12 UART0 rx */
-+	      <0x0 0x5a2d0000 0x0 0x10000>, /* channel13 UART0 tx */
-+	      <0x0 0x5a2e0000 0x0 0x10000>, /* channel14 UART1 rx */
-+	      <0x0 0x5a2f0000 0x0 0x10000>; /* channel15 UART1 tx */
-+	#dma-cells = <3>;
-+	dma-channels = <4>;
-+	interrupts = <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
-+		     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
-+		     <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
-+		     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>;
-+	interrupt-names = "edma-chan12-tx", "edma-chan13-tx",
-+			  "edma-chan14-tx", "edma-chan15-tx";
-+	status = "okay";
-+};
-+
-+* DMA clients
-+DMA client drivers that uses the DMA function must use the format described
-+in the dma.txt file, using a three-cell specifier for each channel: the 1st
-+specifies the channel number, the 2nd specifies the priority, and the 3rd
-+specifies the channel type is for transmit or receive: 0: transmit, 1: receive.
-+
-+Examples:
-+lpuart1: serial@5a070000 {
-+	compatible = "fsl,imx8qm-lpuart";
-+	reg = <0x0 0x5a070000 0x0 0x1000>;
-+	interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-+	interrupt-parent = <&gic>;
-+	clocks = <&clk IMX8QM_UART1_CLK>;
-+	clock-names = "ipg";
-+	assigned-clock-names = <&clk IMX8QM_UART1_CLK>;
-+	assigned-clock-rates = <80000000>;
-+	power-domains = <&pd_dma_lpuart1>;
-+	dma-names = "tx","rx";
-+	dmas = <&edma0 15 0 0>,
-+		<&edma0 14 0 1>;
-+	status = "disabled";
-+};
---- a/drivers/dma/Kconfig
-+++ b/drivers/dma/Kconfig
-@@ -228,6 +228,17 @@ config FSL_QDMA
-          or dequeuing DMA jobs from, different work queues.
-          This module can be found on NXP Layerscape SoCs.
- 	  The qdma driver only work on  SoCs with a DPAA hardware block.
-+config FSL_EDMA_V3
-+	tristate "Freescale eDMA v3 engine support"
-+	depends on OF
-+	select DMA_ENGINE
-+	select DMA_VIRTUAL_CHANNELS
-+	help
-+	  Support the Freescale eDMA v3 engine with programmable channel.
-+	  This driver is based on FSL_EDMA but big changes come such as
-+	  different interrupt for different channel, different register
-+	  scope for different channel.
-+	  This module can be found on Freescale i.MX8QM.
- 
- config FSL_RAID
-         tristate "Freescale RAID engine Support"
---- a/drivers/dma/Makefile
-+++ b/drivers/dma/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_DW_EDMA) += dw-edma/
- obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
- obj-$(CONFIG_FSL_DMA) += fsldma.o
- obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
-+obj-$(CONFIG_FSL_EDMA_V3) += fsl-edma-v3.o
- obj-$(CONFIG_MCF_EDMA) += mcf-edma.o fsl-edma-common.o
- obj-$(CONFIG_FSL_QDMA) += fsl-qdma.o
- obj-$(CONFIG_FSL_RAID) += fsl_raid.o
---- /dev/null
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -0,0 +1,890 @@
-+/*
-+ * drivers/dma/fsl-edma3-v3.c
-+ *
-+ * Copyright 2017 NXP .
-+ *
-+ * Driver for the Freescale eDMA engine v3. This driver based on fsl-edma3.c
-+ * but changed to meet the IP change on i.MX8QM: every dma channel is specific
-+ * to hardware. For example, channel 14 for LPUART1 receive request and channel
-+ * 13 for transmit requesst. The eDMA block can be found on i.MX8QM
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/of_address.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_dma.h>
-+
-+#include "virt-dma.h"
-+
-+#define EDMA_CH_CSR			0x00
-+#define EDMA_CH_ES			0x04
-+#define EDMA_CH_INT			0x08
-+#define EDMA_CH_SBR			0x0C
-+#define EDMA_CH_PRI			0x10
-+#define EDMA_TCD_SADDR			0x20
-+#define EDMA_TCD_SOFF			0x24
-+#define EDMA_TCD_ATTR			0x26
-+#define EDMA_TCD_NBYTES			0x28
-+#define EDMA_TCD_SLAST			0x2C
-+#define EDMA_TCD_DADDR			0x30
-+#define EDMA_TCD_DOFF			0x34
-+#define EDMA_TCD_CITER_ELINK		0x36
-+#define EDMA_TCD_CITER			0x36
-+#define EDMA_TCD_DLAST_SGA		0x38
-+#define EDMA_TCD_CSR			0x3C
-+#define EDMA_TCD_BITER_ELINK		0x3E
-+#define EDMA_TCD_BITER			0x3E
-+
-+#define EDMA_CH_SBR_RD		BIT(22)
-+#define EDMA_CH_SBR_WR		BIT(21)
-+#define EDMA_CH_CSR_ERQ		BIT(0)
-+#define EDMA_CH_CSR_EARQ	BIT(1)
-+#define EDMA_CH_CSR_EEI		BIT(2)
-+#define EDMA_CH_CSR_DONE	BIT(30)
-+#define EDMA_CH_CSR_ACTIVE	BIT(31)
-+
-+#define EDMA_TCD_ATTR_DSIZE(x)		(((x) & 0x0007))
-+#define EDMA_TCD_ATTR_DMOD(x)		(((x) & 0x001F) << 3)
-+#define EDMA_TCD_ATTR_SSIZE(x)		(((x) & 0x0007) << 8)
-+#define EDMA_TCD_ATTR_SMOD(x)		(((x) & 0x001F) << 11)
-+#define EDMA_TCD_ATTR_SSIZE_8BIT	(0x0000)
-+#define EDMA_TCD_ATTR_SSIZE_16BIT	(0x0100)
-+#define EDMA_TCD_ATTR_SSIZE_32BIT	(0x0200)
-+#define EDMA_TCD_ATTR_SSIZE_64BIT	(0x0300)
-+#define EDMA_TCD_ATTR_SSIZE_16BYTE	(0x0400)
-+#define EDMA_TCD_ATTR_SSIZE_32BYTE	(0x0500)
-+#define EDMA_TCD_ATTR_SSIZE_64BYTE	(0x0600)
-+#define EDMA_TCD_ATTR_DSIZE_8BIT	(0x0000)
-+#define EDMA_TCD_ATTR_DSIZE_16BIT	(0x0001)
-+#define EDMA_TCD_ATTR_DSIZE_32BIT	(0x0002)
-+#define EDMA_TCD_ATTR_DSIZE_64BIT	(0x0003)
-+#define EDMA_TCD_ATTR_DSIZE_16BYTE	(0x0004)
-+#define EDMA_TCD_ATTR_DSIZE_32BYTE	(0x0005)
-+#define EDMA_TCD_ATTR_DSIZE_64BYTE	(0x0006)
-+
-+#define EDMA_TCD_SOFF_SOFF(x)		(x)
-+#define EDMA_TCD_NBYTES_NBYTES(x)	(x)
-+#define EDMA_TCD_SLAST_SLAST(x)		(x)
-+#define EDMA_TCD_DADDR_DADDR(x)		(x)
-+#define EDMA_TCD_CITER_CITER(x)		((x) & 0x7FFF)
-+#define EDMA_TCD_DOFF_DOFF(x)		(x)
-+#define EDMA_TCD_DLAST_SGA_DLAST_SGA(x)	(x)
-+#define EDMA_TCD_BITER_BITER(x)		((x) & 0x7FFF)
-+
-+#define EDMA_TCD_CSR_START		BIT(0)
-+#define EDMA_TCD_CSR_INT_MAJOR		BIT(1)
-+#define EDMA_TCD_CSR_INT_HALF		BIT(2)
-+#define EDMA_TCD_CSR_D_REQ		BIT(3)
-+#define EDMA_TCD_CSR_E_SG		BIT(4)
-+#define EDMA_TCD_CSR_E_LINK		BIT(5)
-+#define EDMA_TCD_CSR_ACTIVE		BIT(6)
-+#define EDMA_TCD_CSR_DONE		BIT(7)
-+
-+#define FSL_EDMA_BUSWIDTHS	(BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
-+				BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
-+				BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
-+				BIT(DMA_SLAVE_BUSWIDTH_8_BYTES) | \
-+				BIT(DMA_SLAVE_BUSWIDTH_16_BYTES))
-+
-+struct fsl_edma3_hw_tcd {
-+	__le32	saddr;
-+	__le16	soff;
-+	__le16	attr;
-+	__le32	nbytes;
-+	__le32	slast;
-+	__le32	daddr;
-+	__le16	doff;
-+	__le16	citer;
-+	__le32	dlast_sga;
-+	__le16	csr;
-+	__le16	biter;
-+};
-+
-+struct fsl_edma3_sw_tcd {
-+	dma_addr_t			ptcd;
-+	struct fsl_edma3_hw_tcd		*vtcd;
-+};
-+
-+struct fsl_edma3_slave_config {
-+	enum dma_transfer_direction	dir;
-+	enum dma_slave_buswidth		addr_width;
-+	u32				dev_addr;
-+	u32				dev2_addr; /* source addr for dev2dev */
-+	u32				burst;
-+	u32				attr;
-+};
-+
-+struct fsl_edma3_chan {
-+	struct virt_dma_chan		vchan;
-+	enum dma_status			status;
-+	struct fsl_edma3_engine		*edma3;
-+	struct fsl_edma3_desc		*edesc;
-+	struct fsl_edma3_slave_config	fsc;
-+	void __iomem			*membase;
-+	int				txirq;
-+	int				hw_chanid;
-+	int				priority;
-+	int				is_rxchan;
-+	struct dma_pool			*tcd_pool;
-+	u32				chn_real_count;
-+	char				txirq_name[32];
-+};
-+
-+struct fsl_edma3_desc {
-+	struct virt_dma_desc		vdesc;
-+	struct fsl_edma3_chan		*echan;
-+	bool				iscyclic;
-+	unsigned int			n_tcds;
-+	struct fsl_edma3_sw_tcd		tcd[];
-+};
-+
-+struct fsl_edma3_engine {
-+	struct dma_device	dma_dev;
-+	struct mutex		fsl_edma3_mutex;
-+	u32			n_chans;
-+	int			errirq;
-+	bool			swap;	/* remote/local swapped on Audio edma */
-+	struct fsl_edma3_chan	chans[];
-+};
-+
-+static struct fsl_edma3_chan *to_fsl_edma3_chan(struct dma_chan *chan)
-+{
-+	return container_of(chan, struct fsl_edma3_chan, vchan.chan);
-+}
-+
-+static struct fsl_edma3_desc *to_fsl_edma3_desc(struct virt_dma_desc *vd)
-+{
-+	return container_of(vd, struct fsl_edma3_desc, vdesc);
-+}
-+
-+static void fsl_edma3_enable_request(struct fsl_edma3_chan *fsl_chan)
-+{
-+	void __iomem *addr = fsl_chan->membase;
-+	u32 val;
-+
-+	val = readl(addr + EDMA_CH_SBR);
-+	/* Remote/local swapped wrongly on iMX8 QM Audio edma */
-+	if (fsl_chan->edma3->swap) {
-+		if (!fsl_chan->is_rxchan)
-+			val |= EDMA_CH_SBR_RD;
-+		else
-+			val |= EDMA_CH_SBR_WR;
-+	} else {
-+		if (fsl_chan->is_rxchan)
-+			val |= EDMA_CH_SBR_RD;
-+		else
-+			val |= EDMA_CH_SBR_WR;
-+	}
-+	writel(val, addr + EDMA_CH_SBR);
-+
-+	val = readl(addr + EDMA_CH_CSR);
-+
-+	val |= EDMA_CH_CSR_ERQ;
-+	writel(val, addr + EDMA_CH_CSR);
-+}
-+
-+static void fsl_edma3_disable_request(struct fsl_edma3_chan *fsl_chan)
-+{
-+	void __iomem *addr = fsl_chan->membase;
-+	u32 val = readl(addr + EDMA_CH_CSR);
-+
-+	val &= ~EDMA_CH_CSR_ERQ;
-+	writel(val, addr + EDMA_CH_CSR);
-+}
-+
-+static unsigned int fsl_edma3_get_tcd_attr(enum dma_slave_buswidth addr_width)
-+{
-+	switch (addr_width) {
-+	case 1:
-+		return EDMA_TCD_ATTR_SSIZE_8BIT | EDMA_TCD_ATTR_DSIZE_8BIT;
-+	case 2:
-+		return EDMA_TCD_ATTR_SSIZE_16BIT | EDMA_TCD_ATTR_DSIZE_16BIT;
-+	case 4:
-+		return EDMA_TCD_ATTR_SSIZE_32BIT | EDMA_TCD_ATTR_DSIZE_32BIT;
-+	case 8:
-+		return EDMA_TCD_ATTR_SSIZE_64BIT | EDMA_TCD_ATTR_DSIZE_64BIT;
-+	case 16:
-+		return EDMA_TCD_ATTR_SSIZE_16BYTE | EDMA_TCD_ATTR_DSIZE_16BYTE;
-+	case 32:
-+		return EDMA_TCD_ATTR_SSIZE_32BYTE | EDMA_TCD_ATTR_DSIZE_32BYTE;
-+	case 64:
-+		return EDMA_TCD_ATTR_SSIZE_64BYTE | EDMA_TCD_ATTR_DSIZE_64BYTE;
-+	default:
-+		return EDMA_TCD_ATTR_SSIZE_32BIT | EDMA_TCD_ATTR_DSIZE_32BIT;
-+	}
-+}
-+
-+static void fsl_edma3_free_desc(struct virt_dma_desc *vdesc)
-+{
-+	struct fsl_edma3_desc *fsl_desc;
-+	int i;
-+
-+	fsl_desc = to_fsl_edma3_desc(vdesc);
-+	for (i = 0; i < fsl_desc->n_tcds; i++)
-+		dma_pool_free(fsl_desc->echan->tcd_pool, fsl_desc->tcd[i].vtcd,
-+			      fsl_desc->tcd[i].ptcd);
-+	kfree(fsl_desc);
-+}
-+
-+static int fsl_edma3_terminate_all(struct dma_chan *chan)
-+{
-+	struct fsl_edma3_chan *fsl_chan = to_fsl_edma3_chan(chan);
-+	unsigned long flags;
-+	LIST_HEAD(head);
-+
-+	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-+	fsl_edma3_disable_request(fsl_chan);
-+	fsl_chan->edesc = NULL;
-+	vchan_get_all_descriptors(&fsl_chan->vchan, &head);
-+	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-+	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
-+	return 0;
-+}
-+
-+static int fsl_edma3_pause(struct dma_chan *chan)
-+{
-+	struct fsl_edma3_chan *fsl_chan = to_fsl_edma3_chan(chan);
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-+	if (fsl_chan->edesc) {
-+		fsl_edma3_disable_request(fsl_chan);
-+		fsl_chan->status = DMA_PAUSED;
-+	}
-+	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-+	return 0;
-+}
-+
-+static int fsl_edma3_resume(struct dma_chan *chan)
-+{
-+	struct fsl_edma3_chan *fsl_chan = to_fsl_edma3_chan(chan);
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-+	if (fsl_chan->edesc) {
-+		fsl_edma3_enable_request(fsl_chan);
-+		fsl_chan->status = DMA_IN_PROGRESS;
-+	}
-+	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-+	return 0;
-+}
-+
-+static int fsl_edma3_slave_config(struct dma_chan *chan,
-+				 struct dma_slave_config *cfg)
-+{
-+	struct fsl_edma3_chan *fsl_chan = to_fsl_edma3_chan(chan);
-+
-+	fsl_chan->fsc.dir = cfg->direction;
-+	if (cfg->direction == DMA_DEV_TO_MEM) {
-+		fsl_chan->fsc.dev_addr = cfg->src_addr;
-+		fsl_chan->fsc.addr_width = cfg->src_addr_width;
-+		fsl_chan->fsc.burst = cfg->src_maxburst;
-+		fsl_chan->fsc.attr = fsl_edma3_get_tcd_attr
-+					(cfg->src_addr_width);
-+	} else if (cfg->direction == DMA_MEM_TO_DEV) {
-+		fsl_chan->fsc.dev_addr = cfg->dst_addr;
-+		fsl_chan->fsc.addr_width = cfg->dst_addr_width;
-+		fsl_chan->fsc.burst = cfg->dst_maxburst;
-+		fsl_chan->fsc.attr = fsl_edma3_get_tcd_attr
-+					(cfg->dst_addr_width);
-+	} else if (cfg->direction == DMA_DEV_TO_DEV) {
-+		fsl_chan->fsc.dev2_addr = cfg->src_addr;
-+		fsl_chan->fsc.dev_addr = cfg->dst_addr;
-+		fsl_chan->fsc.addr_width = cfg->dst_addr_width;
-+		fsl_chan->fsc.burst = cfg->dst_maxburst;
-+		fsl_chan->fsc.attr = fsl_edma3_get_tcd_attr
-+					(cfg->dst_addr_width);
-+	} else {
-+			return -EINVAL;
-+	}
-+	return 0;
-+}
-+
-+static size_t fsl_edma3_desc_residue(struct fsl_edma3_chan *fsl_chan,
-+		struct virt_dma_desc *vdesc, bool in_progress)
-+{
-+	struct fsl_edma3_desc *edesc = fsl_chan->edesc;
-+	void __iomem *addr = fsl_chan->membase;
-+	enum dma_transfer_direction dir = fsl_chan->fsc.dir;
-+	dma_addr_t cur_addr, dma_addr;
-+	size_t len, size;
-+	int i;
-+
-+	/* calculate the total size in this desc */
-+	for (len = i = 0; i < fsl_chan->edesc->n_tcds; i++)
-+		len += le32_to_cpu(edesc->tcd[i].vtcd->nbytes)
-+			* le16_to_cpu(edesc->tcd[i].vtcd->biter);
-+
-+	if (!in_progress)
-+		return len;
-+
-+	if (dir == DMA_MEM_TO_DEV)
-+		cur_addr = readl(addr + EDMA_TCD_SADDR);
-+	else
-+		cur_addr = readl(addr + EDMA_TCD_DADDR);
-+
-+	/* figure out the finished and calculate the residue */
-+	for (i = 0; i < fsl_chan->edesc->n_tcds; i++) {
-+		size = le32_to_cpu(edesc->tcd[i].vtcd->nbytes)
-+			* le16_to_cpu(edesc->tcd[i].vtcd->biter);
-+		if (dir == DMA_MEM_TO_DEV)
-+			dma_addr = le32_to_cpu(edesc->tcd[i].vtcd->saddr);
-+		else
-+			dma_addr = le32_to_cpu(edesc->tcd[i].vtcd->daddr);
-+
-+		len -= size;
-+		if (cur_addr >= dma_addr && cur_addr < dma_addr + size) {
-+			len += dma_addr + size - cur_addr;
-+			break;
-+		}
-+	}
-+
-+	return len;
-+}
-+
-+static enum dma_status fsl_edma3_tx_status(struct dma_chan *chan,
-+		dma_cookie_t cookie, struct dma_tx_state *txstate)
-+{
-+	struct fsl_edma3_chan *fsl_chan = to_fsl_edma3_chan(chan);
-+	struct virt_dma_desc *vdesc;
-+	enum dma_status status;
-+	unsigned long flags;
-+
-+	status = dma_cookie_status(chan, cookie, txstate);
-+	if (status == DMA_COMPLETE) {
-+		spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-+		txstate->residue = fsl_chan->chn_real_count;
-+		spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-+		return status;
-+	}
-+
-+	if (!txstate)
-+		return fsl_chan->status;
-+
-+	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-+	vdesc = vchan_find_desc(&fsl_chan->vchan, cookie);
-+	if (fsl_chan->edesc && cookie == fsl_chan->edesc->vdesc.tx.cookie)
-+		txstate->residue = fsl_edma3_desc_residue(fsl_chan, vdesc,
-+								true);
-+	else if (vdesc)
-+		txstate->residue = fsl_edma3_desc_residue(fsl_chan, vdesc,
-+								false);
-+	else
-+		txstate->residue = 0;
-+
-+	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-+
-+	return fsl_chan->status;
-+}
-+
-+static void fsl_edma3_set_tcd_regs(struct fsl_edma3_chan *fsl_chan,
-+				  struct fsl_edma3_hw_tcd *tcd)
-+{
-+	void __iomem *addr = fsl_chan->membase;
-+	/*
-+	 * TCD parameters are stored in struct fsl_edma3_hw_tcd in little
-+	 * endian format. However, we need to load the TCD registers in
-+	 * big- or little-endian obeying the eDMA engine model endian.
-+	 */
-+	writew(0, addr + EDMA_TCD_CSR);
-+	writel(le32_to_cpu(tcd->saddr), addr + EDMA_TCD_SADDR);
-+	writel(le32_to_cpu(tcd->daddr), addr + EDMA_TCD_DADDR);
-+
-+	writew(le16_to_cpu(tcd->attr), addr + EDMA_TCD_ATTR);
-+	writew(le16_to_cpu(tcd->soff), addr + EDMA_TCD_SOFF);
-+
-+	writel(le32_to_cpu(tcd->nbytes), addr + EDMA_TCD_NBYTES);
-+	writel(le32_to_cpu(tcd->slast), addr + EDMA_TCD_SLAST);
-+
-+	writew(le16_to_cpu(tcd->citer), addr + EDMA_TCD_CITER);
-+	writew(le16_to_cpu(tcd->biter), addr + EDMA_TCD_BITER);
-+	writew(le16_to_cpu(tcd->doff), addr + EDMA_TCD_DOFF);
-+
-+	writel(le32_to_cpu(tcd->dlast_sga), addr + EDMA_TCD_DLAST_SGA);
-+
-+	writew(le16_to_cpu(tcd->csr), addr + EDMA_TCD_CSR);
-+}
-+
-+static inline
-+void fsl_edma3_fill_tcd(struct fsl_edma3_chan *fsl_chan,
-+			struct fsl_edma3_hw_tcd *tcd, u32 src, u32 dst,
-+			u16 attr, u16 soff, u32 nbytes, u32 slast, u16 citer,
-+			u16 biter, u16 doff, u32 dlast_sga, bool major_int,
-+			bool disable_req, bool enable_sg)
-+{
-+	u16 csr = 0;
-+
-+	/*
-+	 * eDMA hardware SGs require the TCDs to be stored in little
-+	 * endian format irrespective of the register endian model.
-+	 * So we put the value in little endian in memory, waiting
-+	 * for fsl_edma3_set_tcd_regs doing the swap.
-+	 */
-+	tcd->saddr = cpu_to_le32(src);
-+	tcd->daddr = cpu_to_le32(dst);
-+
-+	tcd->attr = cpu_to_le16(attr);
-+
-+	tcd->soff = cpu_to_le16(EDMA_TCD_SOFF_SOFF(soff));
-+
-+	tcd->nbytes = cpu_to_le32(EDMA_TCD_NBYTES_NBYTES(nbytes));
-+	tcd->slast = cpu_to_le32(EDMA_TCD_SLAST_SLAST(slast));
-+
-+	tcd->citer = cpu_to_le16(EDMA_TCD_CITER_CITER(citer));
-+	tcd->doff = cpu_to_le16(EDMA_TCD_DOFF_DOFF(doff));
-+
-+	tcd->dlast_sga = cpu_to_le32(EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga));
-+
-+	tcd->biter = cpu_to_le16(EDMA_TCD_BITER_BITER(biter));
-+	if (major_int)
-+		csr |= EDMA_TCD_CSR_INT_MAJOR;
-+
-+	if (disable_req)
-+		csr |= EDMA_TCD_CSR_D_REQ;
-+
-+	if (enable_sg)
-+		csr |= EDMA_TCD_CSR_E_SG;
-+
-+	if (fsl_chan->is_rxchan)
-+		csr |= EDMA_TCD_CSR_ACTIVE;
-+
-+	tcd->csr = cpu_to_le16(csr);
-+}
-+
-+static struct fsl_edma3_desc *fsl_edma3_alloc_desc(struct fsl_edma3_chan
-+						*fsl_chan, int sg_len)
-+{
-+	struct fsl_edma3_desc *fsl_desc;
-+	int i;
-+
-+	fsl_desc = kzalloc(sizeof(*fsl_desc) + sizeof(struct fsl_edma3_sw_tcd)
-+				* sg_len, GFP_ATOMIC);
-+	if (!fsl_desc)
-+		return NULL;
-+
-+	fsl_desc->echan = fsl_chan;
-+	fsl_desc->n_tcds = sg_len;
-+	for (i = 0; i < sg_len; i++) {
-+		fsl_desc->tcd[i].vtcd = dma_pool_alloc(fsl_chan->tcd_pool,
-+					GFP_ATOMIC, &fsl_desc->tcd[i].ptcd);
-+		if (!fsl_desc->tcd[i].vtcd)
-+			goto err;
-+	}
-+	return fsl_desc;
-+
-+err:
-+	while (--i >= 0)
-+		dma_pool_free(fsl_chan->tcd_pool, fsl_desc->tcd[i].vtcd,
-+				fsl_desc->tcd[i].ptcd);
-+	kfree(fsl_desc);
-+	return NULL;
-+}
-+
-+static struct dma_async_tx_descriptor *fsl_edma3_prep_dma_cyclic(
-+		struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
-+		size_t period_len, enum dma_transfer_direction direction,
-+		unsigned long flags)
-+{
-+	struct fsl_edma3_chan *fsl_chan = to_fsl_edma3_chan(chan);
-+	struct fsl_edma3_desc *fsl_desc;
-+	dma_addr_t dma_buf_next;
-+	int sg_len, i;
-+	u32 src_addr, dst_addr, last_sg, nbytes;
-+	u16 soff, doff, iter;
-+
-+	sg_len = buf_len / period_len;
-+	fsl_desc = fsl_edma3_alloc_desc(fsl_chan, sg_len);
-+	if (!fsl_desc)
-+		return NULL;
-+	fsl_desc->iscyclic = true;
-+
-+	dma_buf_next = dma_addr;
-+	nbytes = fsl_chan->fsc.addr_width * fsl_chan->fsc.burst;
-+	iter = period_len / nbytes;
-+
-+	for (i = 0; i < sg_len; i++) {
-+		if (dma_buf_next >= dma_addr + buf_len)
-+			dma_buf_next = dma_addr;
-+
-+		/* get next sg's physical address */
-+		last_sg = fsl_desc->tcd[(i + 1) % sg_len].ptcd;
-+
-+		if (fsl_chan->fsc.dir == DMA_MEM_TO_DEV) {
-+			src_addr = dma_buf_next;
-+			dst_addr = fsl_chan->fsc.dev_addr;
-+			soff = fsl_chan->fsc.addr_width;
-+			doff = 0;
-+		} else if (fsl_chan->fsc.dir == DMA_DEV_TO_MEM) {
-+			src_addr = fsl_chan->fsc.dev_addr;
-+			dst_addr = dma_buf_next;
-+			soff = 0;
-+			doff = fsl_chan->fsc.addr_width;
-+		} else {
-+			/* DMA_DEV_TO_DEV */
-+			src_addr = fsl_chan->fsc.dev2_addr;
-+			dst_addr = fsl_chan->fsc.dev_addr;
-+			soff = 0;
-+			doff = 0;
-+		}
-+
-+		fsl_edma3_fill_tcd(fsl_chan, fsl_desc->tcd[i].vtcd, src_addr,
-+				dst_addr, fsl_chan->fsc.attr, soff, nbytes, 0,
-+				iter, iter, doff, last_sg, true, false, true);
-+		dma_buf_next += period_len;
-+	}
-+
-+	return vchan_tx_prep(&fsl_chan->vchan, &fsl_desc->vdesc, flags);
-+}
-+
-+static struct dma_async_tx_descriptor *fsl_edma3_prep_slave_sg(
-+		struct dma_chan *chan, struct scatterlist *sgl,
-+		unsigned int sg_len, enum dma_transfer_direction direction,
-+		unsigned long flags, void *context)
-+{
-+	struct fsl_edma3_chan *fsl_chan = to_fsl_edma3_chan(chan);
-+	struct fsl_edma3_desc *fsl_desc;
-+	struct scatterlist *sg;
-+	u32 src_addr, dst_addr, last_sg, nbytes;
-+	u16 soff, doff, iter;
-+	int i;
-+
-+	if (!is_slave_direction(fsl_chan->fsc.dir))
-+		return NULL;
-+
-+	fsl_desc = fsl_edma3_alloc_desc(fsl_chan, sg_len);
-+	if (!fsl_desc)
-+		return NULL;
-+	fsl_desc->iscyclic = false;
-+
-+	nbytes = fsl_chan->fsc.addr_width * fsl_chan->fsc.burst;
-+	for_each_sg(sgl, sg, sg_len, i) {
-+		/* get next sg's physical address */
-+		last_sg = fsl_desc->tcd[(i + 1) % sg_len].ptcd;
-+
-+		if (fsl_chan->fsc.dir == DMA_MEM_TO_DEV) {
-+			src_addr = sg_dma_address(sg);
-+			dst_addr = fsl_chan->fsc.dev_addr;
-+			soff = fsl_chan->fsc.addr_width;
-+			doff = 0;
-+		} else if (fsl_chan->fsc.dir == DMA_DEV_TO_MEM) {
-+			src_addr = fsl_chan->fsc.dev_addr;
-+			dst_addr = sg_dma_address(sg);
-+			soff = 0;
-+			doff = fsl_chan->fsc.addr_width;
-+		} else {
-+			/* DMA_DEV_TO_DEV */
-+			src_addr = fsl_chan->fsc.dev2_addr;
-+			dst_addr = fsl_chan->fsc.dev_addr;
-+			soff = 0;
-+			doff = 0;
-+		}
-+
-+		iter = sg_dma_len(sg) / nbytes;
-+		if (i < sg_len - 1) {
-+			last_sg = fsl_desc->tcd[(i + 1)].ptcd;
-+			fsl_edma3_fill_tcd(fsl_chan, fsl_desc->tcd[i].vtcd,
-+					src_addr, dst_addr, fsl_chan->fsc.attr,
-+					soff, nbytes, 0, iter, iter, doff,
-+					last_sg, false, false, true);
-+		} else {
-+			last_sg = 0;
-+			fsl_edma3_fill_tcd(fsl_chan, fsl_desc->tcd[i].vtcd,
-+					src_addr, dst_addr, fsl_chan->fsc.attr,
-+					soff, nbytes, 0, iter, iter, doff,
-+					last_sg, true, true, false);
-+		}
-+	}
-+
-+	return vchan_tx_prep(&fsl_chan->vchan, &fsl_desc->vdesc, flags);
-+}
-+
-+static void fsl_edma3_xfer_desc(struct fsl_edma3_chan *fsl_chan)
-+{
-+	struct virt_dma_desc *vdesc;
-+
-+	vdesc = vchan_next_desc(&fsl_chan->vchan);
-+	if (!vdesc)
-+		return;
-+	fsl_chan->edesc = to_fsl_edma3_desc(vdesc);
-+	fsl_edma3_set_tcd_regs(fsl_chan, fsl_chan->edesc->tcd[0].vtcd);
-+	fsl_edma3_enable_request(fsl_chan);
-+	fsl_chan->status = DMA_IN_PROGRESS;
-+}
-+
-+static size_t fsl_edma3_desc_residue(struct fsl_edma3_chan *fsl_chan,
-+		struct virt_dma_desc *vdesc, bool in_progress);
-+
-+static void fsl_edma3_get_realcnt(struct fsl_edma3_chan *fsl_chan)
-+{
-+	fsl_chan->chn_real_count = fsl_edma3_desc_residue(fsl_chan, NULL, true);
-+}
-+
-+static irqreturn_t fsl_edma3_tx_handler(int irq, void *dev_id)
-+{
-+	struct fsl_edma3_chan *fsl_chan = dev_id;
-+	unsigned int intr;
-+	void __iomem *base_addr;
-+
-+	base_addr = fsl_chan->membase;
-+
-+	intr = readl(base_addr + EDMA_CH_INT);
-+	if (!intr)
-+		return IRQ_NONE;
-+
-+	writel(1, base_addr + EDMA_CH_INT);
-+
-+	spin_lock(&fsl_chan->vchan.lock);
-+	if (!fsl_chan->edesc->iscyclic) {
-+		fsl_edma3_get_realcnt(fsl_chan);
-+		list_del(&fsl_chan->edesc->vdesc.node);
-+		vchan_cookie_complete(&fsl_chan->edesc->vdesc);
-+		fsl_chan->edesc = NULL;
-+		fsl_chan->status = DMA_COMPLETE;
-+	} else {
-+		vchan_cyclic_callback(&fsl_chan->edesc->vdesc);
-+	}
-+
-+	if (!fsl_chan->edesc)
-+		fsl_edma3_xfer_desc(fsl_chan);
-+
-+	spin_unlock(&fsl_chan->vchan.lock);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static void fsl_edma3_issue_pending(struct dma_chan *chan)
-+{
-+	struct fsl_edma3_chan *fsl_chan = to_fsl_edma3_chan(chan);
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-+
-+	if (vchan_issue_pending(&fsl_chan->vchan) && !fsl_chan->edesc)
-+		fsl_edma3_xfer_desc(fsl_chan);
-+
-+	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-+}
-+
-+static struct dma_chan *fsl_edma3_xlate(struct of_phandle_args *dma_spec,
-+		struct of_dma *ofdma)
-+{
-+	struct fsl_edma3_engine *fsl_edma3 = ofdma->of_dma_data;
-+	struct dma_chan *chan, *_chan;
-+	struct fsl_edma3_chan *fsl_chan;
-+
-+	if (dma_spec->args_count != 3)
-+		return NULL;
-+
-+	mutex_lock(&fsl_edma3->fsl_edma3_mutex);
-+	list_for_each_entry_safe(chan, _chan, &fsl_edma3->dma_dev.channels,
-+					device_node) {
-+		if (chan->client_count)
-+			continue;
-+
-+		fsl_chan = to_fsl_edma3_chan(chan);
-+		if (fsl_chan->hw_chanid == dma_spec->args[0]) {
-+			chan = dma_get_slave_channel(chan);
-+			chan->device->privatecnt++;
-+			fsl_chan->priority = dma_spec->args[1];
-+			fsl_chan->is_rxchan = dma_spec->args[2];
-+			mutex_unlock(&fsl_edma3->fsl_edma3_mutex);
-+			return chan;
-+		}
-+	}
-+	mutex_unlock(&fsl_edma3->fsl_edma3_mutex);
-+	return NULL;
-+}
-+
-+static int fsl_edma3_alloc_chan_resources(struct dma_chan *chan)
-+{
-+	struct fsl_edma3_chan *fsl_chan = to_fsl_edma3_chan(chan);
-+
-+	fsl_chan->tcd_pool = dma_pool_create("tcd_pool", chan->device->dev,
-+				sizeof(struct fsl_edma3_hw_tcd),
-+				32, 0);
-+	return 0;
-+}
-+
-+static void fsl_edma3_free_chan_resources(struct dma_chan *chan)
-+{
-+	struct fsl_edma3_chan *fsl_chan = to_fsl_edma3_chan(chan);
-+	unsigned long flags;
-+	LIST_HEAD(head);
-+
-+	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-+	fsl_edma3_disable_request(fsl_chan);
-+	fsl_chan->edesc = NULL;
-+	vchan_get_all_descriptors(&fsl_chan->vchan, &head);
-+	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-+
-+	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
-+	dma_pool_destroy(fsl_chan->tcd_pool);
-+	fsl_chan->tcd_pool = NULL;
-+}
-+
-+static int fsl_edma3_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct fsl_edma3_engine *fsl_edma3;
-+	struct fsl_edma3_chan *fsl_chan;
-+	struct resource *res;
-+	int len, chans;
-+	int ret, i;
-+	unsigned long irqflag = 0;
-+
-+	ret = of_property_read_u32(np, "dma-channels", &chans);
-+	if (ret) {
-+		dev_err(&pdev->dev, "Can't get dma-channels.\n");
-+		return ret;
-+	}
-+
-+	len = sizeof(*fsl_edma3) + sizeof(*fsl_chan) * chans;
-+	fsl_edma3 = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
-+	if (!fsl_edma3)
-+		return -ENOMEM;
-+
-+	/* Audio edma rx/tx channel shared interrupt */
-+	if (of_property_read_bool(np, "shared-interrupt"))
-+		irqflag = IRQF_SHARED;
-+
-+	fsl_edma3->swap = of_device_is_compatible(np, "fsl,imx8qm-adma");
-+	fsl_edma3->n_chans = chans;
-+
-+	INIT_LIST_HEAD(&fsl_edma3->dma_dev.channels);
-+	for (i = 0; i < fsl_edma3->n_chans; i++) {
-+		struct fsl_edma3_chan *fsl_chan = &fsl_edma3->chans[i];
-+		char *txirq_name = fsl_chan->txirq_name;
-+
-+		fsl_chan->edma3 = fsl_edma3;
-+		/* Get per channel membase */
-+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+		fsl_chan->membase = devm_ioremap_resource(&pdev->dev, res);
-+		if (IS_ERR(fsl_chan->membase))
-+			return PTR_ERR(fsl_chan->membase);
-+
-+		/* Get the hardware chanel id by the channel membase
-+		 * channel0:0x10000, channel1:0x20000... total 32 channels
-+		 */
-+		fsl_chan->hw_chanid = (res->start >> 16) & 0x1f;
-+		sprintf(txirq_name, "edma-chan%d-tx", fsl_chan->hw_chanid);
-+
-+		/* request channel irq */
-+		fsl_chan->txirq = platform_get_irq_byname(pdev, txirq_name);
-+		if (fsl_chan->txirq < 0) {
-+			dev_err(&pdev->dev, "Can't get %s irq.\n", txirq_name);
-+			return fsl_chan->txirq;
-+		}
-+
-+		ret = devm_request_irq(&pdev->dev, fsl_chan->txirq,
-+				fsl_edma3_tx_handler, irqflag, txirq_name,
-+				fsl_chan);
-+		if (ret) {
-+			dev_err(&pdev->dev, "Can't register %s IRQ.\n",
-+				txirq_name);
-+			return ret;
-+		}
-+
-+		fsl_chan->vchan.desc_free = fsl_edma3_free_desc;
-+		vchan_init(&fsl_chan->vchan, &fsl_edma3->dma_dev);
-+	}
-+
-+	mutex_init(&fsl_edma3->fsl_edma3_mutex);
-+
-+	dma_cap_set(DMA_PRIVATE, fsl_edma3->dma_dev.cap_mask);
-+	dma_cap_set(DMA_SLAVE, fsl_edma3->dma_dev.cap_mask);
-+	dma_cap_set(DMA_CYCLIC, fsl_edma3->dma_dev.cap_mask);
-+
-+	fsl_edma3->dma_dev.dev = &pdev->dev;
-+	fsl_edma3->dma_dev.device_alloc_chan_resources
-+		= fsl_edma3_alloc_chan_resources;
-+	fsl_edma3->dma_dev.device_free_chan_resources
-+		= fsl_edma3_free_chan_resources;
-+	fsl_edma3->dma_dev.device_tx_status = fsl_edma3_tx_status;
-+	fsl_edma3->dma_dev.device_prep_slave_sg = fsl_edma3_prep_slave_sg;
-+	fsl_edma3->dma_dev.device_prep_dma_cyclic = fsl_edma3_prep_dma_cyclic;
-+	fsl_edma3->dma_dev.device_config = fsl_edma3_slave_config;
-+	fsl_edma3->dma_dev.device_pause = fsl_edma3_pause;
-+	fsl_edma3->dma_dev.device_resume = fsl_edma3_resume;
-+	fsl_edma3->dma_dev.device_terminate_all = fsl_edma3_terminate_all;
-+	fsl_edma3->dma_dev.device_issue_pending = fsl_edma3_issue_pending;
-+
-+	fsl_edma3->dma_dev.src_addr_widths = FSL_EDMA_BUSWIDTHS;
-+	fsl_edma3->dma_dev.dst_addr_widths = FSL_EDMA_BUSWIDTHS;
-+	fsl_edma3->dma_dev.directions = BIT(DMA_DEV_TO_MEM) |
-+					BIT(DMA_MEM_TO_DEV) |
-+					BIT(DMA_DEV_TO_DEV);
-+
-+	platform_set_drvdata(pdev, fsl_edma3);
-+
-+	ret = dma_async_device_register(&fsl_edma3->dma_dev);
-+	if (ret) {
-+		dev_err(&pdev->dev, "Can't register Freescale eDMA engine.\n");
-+		return ret;
-+	}
-+
-+	ret = of_dma_controller_register(np, fsl_edma3_xlate, fsl_edma3);
-+	if (ret) {
-+		dev_err(&pdev->dev, "Can't register Freescale eDMA of_dma.\n");
-+		dma_async_device_unregister(&fsl_edma3->dma_dev);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int fsl_edma3_remove(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct fsl_edma3_engine *fsl_edma3 = platform_get_drvdata(pdev);
-+
-+	of_dma_controller_free(np);
-+	dma_async_device_unregister(&fsl_edma3->dma_dev);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id fsl_edma3_dt_ids[] = {
-+	{ .compatible = "fsl,imx8qm-edma", },
-+	{ .compatible = "fsl,imx8qm-adma", },
-+	{ /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, fsl_edma3_dt_ids);
-+
-+static struct platform_driver fsl_edma3_driver = {
-+	.driver		= {
-+		.name	= "fsl-edma-v3",
-+		.of_match_table = fsl_edma3_dt_ids,
-+	},
-+	.probe          = fsl_edma3_probe,
-+	.remove		= fsl_edma3_remove,
-+};
-+
-+static int __init fsl_edma3_init(void)
-+{
-+	return platform_driver_register(&fsl_edma3_driver);
-+}
-+subsys_initcall(fsl_edma3_init);
-+
-+static void __exit fsl_edma3_exit(void)
-+{
-+	platform_driver_unregister(&fsl_edma3_driver);
-+}
-+module_exit(fsl_edma3_exit);
-+
-+MODULE_ALIAS("platform:fsl-edma3");
-+MODULE_DESCRIPTION("Freescale eDMA-V3 engine driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0004-MLK-15003-1-DMA-fsl-edma-v3-add-one-more-parameter-f.patch b/target/linux/layerscape/patches-5.4/806-dma-0004-MLK-15003-1-DMA-fsl-edma-v3-add-one-more-parameter-f.patch
deleted file mode 100644
index 1af6c7e79d..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0004-MLK-15003-1-DMA-fsl-edma-v3-add-one-more-parameter-f.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From f8692ecd13a787c51eca9234312f5f3fd163a04a Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@freescale.com>
-Date: Mon, 5 Jun 2017 11:05:52 +0800
-Subject: [PATCH] MLK-15003-1: DMA: fsl-edma-v3: add one more parameter for
- xlate
-
-The parameter is "is_remote", which is to use remote access for
-edma, the default access is local access.
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
-(cherry picked from commit eee976b30b0523680f30e762742984f5b5a01b97)
----
- drivers/dma/fsl-edma-v3.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -139,6 +139,7 @@ struct fsl_edma3_chan {
- 	int				hw_chanid;
- 	int				priority;
- 	int				is_rxchan;
-+	int				is_remote;
- 	struct dma_pool			*tcd_pool;
- 	u32				chn_real_count;
- 	char				txirq_name[32];
-@@ -189,6 +190,10 @@ static void fsl_edma3_enable_request(str
- 		else
- 			val |= EDMA_CH_SBR_WR;
- 	}
-+
-+	if (fsl_chan->is_remote)
-+		val &= ~(EDMA_CH_SBR_RD | EDMA_CH_SBR_WR);
-+
- 	writel(val, addr + EDMA_CH_SBR);
- 
- 	val = readl(addr + EDMA_CH_CSR);
-@@ -686,7 +691,7 @@ static struct dma_chan *fsl_edma3_xlate(
- 	struct dma_chan *chan, *_chan;
- 	struct fsl_edma3_chan *fsl_chan;
- 
--	if (dma_spec->args_count != 3)
-+	if (dma_spec->args_count != 4)
- 		return NULL;
- 
- 	mutex_lock(&fsl_edma3->fsl_edma3_mutex);
-@@ -701,6 +706,7 @@ static struct dma_chan *fsl_edma3_xlate(
- 			chan->device->privatecnt++;
- 			fsl_chan->priority = dma_spec->args[1];
- 			fsl_chan->is_rxchan = dma_spec->args[2];
-+			fsl_chan->is_remote = dma_spec->args[3];
- 			mutex_unlock(&fsl_edma3->fsl_edma3_mutex);
- 			return chan;
- 		}
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0005-MLK-15003-2-Document-fsl_edma_v3-update-document.patch b/target/linux/layerscape/patches-5.4/806-dma-0005-MLK-15003-2-Document-fsl_edma_v3-update-document.patch
deleted file mode 100644
index bde8dd55e8..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0005-MLK-15003-2-Document-fsl_edma_v3-update-document.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From c5a10c542853662bf85884aecee1c086ecec9acf Mon Sep 17 00:00:00 2001
-From: Shengjiu Wang <shengjiu.wang@freescale.com>
-Date: Mon, 5 Jun 2017 11:37:57 +0800
-Subject: [PATCH] MLK-15003-2: Document: fsl_edma_v3: update document
-
-update fsl_edma_v3 document for #dma-cell is changed
-one more cell is added, which is for local/remote access.
-
-Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
-(cherry picked from commit 65543fb7fefbdb7df4cb60931a88f61507c5073f)
----
- Documentation/devicetree/bindings/dma/fsl-edma-v3.txt | 10 ++++++----
- 1 file changed, 6 insertions(+), 4 deletions(-)
-
---- a/Documentation/devicetree/bindings/dma/fsl-edma-v3.txt
-+++ b/Documentation/devicetree/bindings/dma/fsl-edma-v3.txt
-@@ -14,11 +14,13 @@ Required properties:
- - interrupts : A list of interrupt-specifiers, each channel has one interrupt.
- - interrupt-names : Should contain:
- 	"edma-chan12-tx" - the channel12 transmission interrupt
--- #dma-cells : Must be <3>.
-+- #dma-cells : Must be <4>.
- 	The 1st cell specifies the channel ID.
- 	The 2nd cell specifies the channel priority.
- 	The 3rd cell specifies the channel type like for transmit or receive:
- 		0: transmit, 1: receive.
-+	The 4th cell specifies the local access or remote access:
-+		0: local, 1: remote.
- 	See the SoC's reference manual for all the supported request sources.
- - dma-channels : Number of channels supported by the controller
- 
-@@ -29,7 +31,7 @@ edma0: dma-controller@40018000 {
- 	      <0x0 0x5a2d0000 0x0 0x10000>, /* channel13 UART0 tx */
- 	      <0x0 0x5a2e0000 0x0 0x10000>, /* channel14 UART1 rx */
- 	      <0x0 0x5a2f0000 0x0 0x10000>; /* channel15 UART1 tx */
--	#dma-cells = <3>;
-+	#dma-cells = <4>;
- 	dma-channels = <4>;
- 	interrupts = <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
- 		     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
-@@ -58,7 +60,7 @@ lpuart1: serial@5a070000 {
- 	assigned-clock-rates = <80000000>;
- 	power-domains = <&pd_dma_lpuart1>;
- 	dma-names = "tx","rx";
--	dmas = <&edma0 15 0 0>,
--		<&edma0 14 0 1>;
-+	dmas = <&edma0 15 0 0 0>,
-+		<&edma0 14 0 1 0>;
- 	status = "disabled";
- };
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0006-MLK-15014-dma-fsl-edma-v3-clear-DONE-before-E_SG-ena.patch b/target/linux/layerscape/patches-5.4/806-dma-0006-MLK-15014-dma-fsl-edma-v3-clear-DONE-before-E_SG-ena.patch
deleted file mode 100644
index bb4a83ccc7..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0006-MLK-15014-dma-fsl-edma-v3-clear-DONE-before-E_SG-ena.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 03691bf3038250def574c78576a8be39133923fd Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Tue, 6 Jun 2017 16:56:49 +0800
-Subject: [PATCH] MLK-15014 dma: fsl-edma-v3: clear DONE before E_SG enabled
-
-Below described in RM, otherwise, channel error status(CHa_ES)
-may be triggered:
-The user must clear the CHa_CSR[DONE] bit before writing the
-TCDa_CSR[MAJORELINK] or TCDa_CSR[ESG] bits.
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-(cherry picked from commit c4164d0a15306174056c6ff423ba2408dd901fcf)
----
- drivers/dma/fsl-edma-v3.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -421,6 +421,11 @@ static void fsl_edma3_set_tcd_regs(struc
- 
- 	writel(le32_to_cpu(tcd->dlast_sga), addr + EDMA_TCD_DLAST_SGA);
- 
-+	/* Must clear CHa_CSR[DONE] bit before enable TCDa_CSR[ESG] */
-+	if ((EDMA_TCD_CSR_E_SG | le16_to_cpu(tcd->csr)) &&
-+		EDMA_CH_CSR_DONE | readl(addr + EDMA_CH_CSR))
-+		writel(EDMA_CH_CSR_DONE, addr + EDMA_CH_CSR);
-+
- 	writew(le16_to_cpu(tcd->csr), addr + EDMA_TCD_CSR);
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0007-MLK-15330-1-dma-fsl-edma-v3-combine-two-cells-into-o.patch b/target/linux/layerscape/patches-5.4/806-dma-0007-MLK-15330-1-dma-fsl-edma-v3-combine-two-cells-into-o.patch
deleted file mode 100644
index 3193f707ce..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0007-MLK-15330-1-dma-fsl-edma-v3-combine-two-cells-into-o.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From bae75b5a56bc2c8768541b4b61edb28609486357 Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Tue, 4 Jul 2017 14:45:25 +0800
-Subject: [PATCH] MLK-15330-1: dma: fsl-edma-v3: combine two cells into one
-
-For dual fifo case, fsl-edma-v3 need add another cell. It's not friendly
-for user and it's possible other cells maybe added to other use cases,
-so combine two cells into one now, and for some special use cases such as
-dual fifo property can directly be passed by one bit of cell3 rather than
-another cell.
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-(cherry picked from commit 3ecd1b3382e2c746728842fb2c084fbb030eb5de)
----
- Documentation/devicetree/bindings/dma/fsl-edma-v3.txt | 13 +++++++------
- drivers/dma/fsl-edma-v3.c                             |  9 ++++++---
- 2 files changed, 13 insertions(+), 9 deletions(-)
-
---- a/Documentation/devicetree/bindings/dma/fsl-edma-v3.txt
-+++ b/Documentation/devicetree/bindings/dma/fsl-edma-v3.txt
-@@ -14,12 +14,13 @@ Required properties:
- - interrupts : A list of interrupt-specifiers, each channel has one interrupt.
- - interrupt-names : Should contain:
- 	"edma-chan12-tx" - the channel12 transmission interrupt
--- #dma-cells : Must be <4>.
-+- #dma-cells : Must be <3>.
- 	The 1st cell specifies the channel ID.
- 	The 2nd cell specifies the channel priority.
--	The 3rd cell specifies the channel type like for transmit or receive:
-+	The 3rd cell specifies the channel attributes which include below:
-+	BIT(0): transmit or receive:
- 		0: transmit, 1: receive.
--	The 4th cell specifies the local access or remote access:
-+	BIT(1): local or remote access:
- 		0: local, 1: remote.
- 	See the SoC's reference manual for all the supported request sources.
- - dma-channels : Number of channels supported by the controller
-@@ -31,7 +32,7 @@ edma0: dma-controller@40018000 {
- 	      <0x0 0x5a2d0000 0x0 0x10000>, /* channel13 UART0 tx */
- 	      <0x0 0x5a2e0000 0x0 0x10000>, /* channel14 UART1 rx */
- 	      <0x0 0x5a2f0000 0x0 0x10000>; /* channel15 UART1 tx */
--	#dma-cells = <4>;
-+	#dma-cells = <3>;
- 	dma-channels = <4>;
- 	interrupts = <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
- 		     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
-@@ -60,7 +61,7 @@ lpuart1: serial@5a070000 {
- 	assigned-clock-rates = <80000000>;
- 	power-domains = <&pd_dma_lpuart1>;
- 	dma-names = "tx","rx";
--	dmas = <&edma0 15 0 0 0>,
--		<&edma0 14 0 1 0>;
-+	dmas = <&edma0 15 0 0>,
-+		<&edma0 14 0 1>;
- 	status = "disabled";
- };
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -100,6 +100,9 @@
- 				BIT(DMA_SLAVE_BUSWIDTH_8_BYTES) | \
- 				BIT(DMA_SLAVE_BUSWIDTH_16_BYTES))
- 
-+#define ARGS_RX				BIT(0)
-+#define ARGS_REMOTE			BIT(1)
-+
- struct fsl_edma3_hw_tcd {
- 	__le32	saddr;
- 	__le16	soff;
-@@ -696,7 +699,7 @@ static struct dma_chan *fsl_edma3_xlate(
- 	struct dma_chan *chan, *_chan;
- 	struct fsl_edma3_chan *fsl_chan;
- 
--	if (dma_spec->args_count != 4)
-+	if (dma_spec->args_count != 3)
- 		return NULL;
- 
- 	mutex_lock(&fsl_edma3->fsl_edma3_mutex);
-@@ -710,8 +713,8 @@ static struct dma_chan *fsl_edma3_xlate(
- 			chan = dma_get_slave_channel(chan);
- 			chan->device->privatecnt++;
- 			fsl_chan->priority = dma_spec->args[1];
--			fsl_chan->is_rxchan = dma_spec->args[2];
--			fsl_chan->is_remote = dma_spec->args[3];
-+			fsl_chan->is_rxchan = dma_spec->args[2] & ARGS_RX;
-+			fsl_chan->is_remote = dma_spec->args[2] & ARGS_REMOTE;
- 			mutex_unlock(&fsl_edma3->fsl_edma3_mutex);
- 			return chan;
- 		}
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0008-MLK-15330-3-dma-fsl-edma-v3-add-dual-fifo-support.patch b/target/linux/layerscape/patches-5.4/806-dma-0008-MLK-15330-3-dma-fsl-edma-v3-add-dual-fifo-support.patch
deleted file mode 100644
index 36222efcb2..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0008-MLK-15330-3-dma-fsl-edma-v3-add-dual-fifo-support.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From 6c753f83ffc3fede13582f667a15e7f6e97f972c Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Tue, 4 Jul 2017 16:04:36 +0800
-Subject: [PATCH] MLK-15330-3 dma: fsl-edma-v3: add dual fifo support
-
-There is Audio dual fifo cause that fill fifo one by one and
-loop back after every minor loop:
-  -- fill the first 32bit width fifo
-  -- fill the next 32bit width fifo
-  -- +MLOFF signed offset after the above two FIFOs filled
-  -- loop back to the first step to handle the next minor loop.
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-(cherry picked from commit 5aa5e9663bb3a834444b75ea086bef8c37ecb636)
----
- .../devicetree/bindings/dma/fsl-edma-v3.txt        |  2 ++
- drivers/dma/fsl-edma-v3.c                          | 29 ++++++++++++++++++++--
- 2 files changed, 29 insertions(+), 2 deletions(-)
-
---- a/Documentation/devicetree/bindings/dma/fsl-edma-v3.txt
-+++ b/Documentation/devicetree/bindings/dma/fsl-edma-v3.txt
-@@ -22,6 +22,8 @@ Required properties:
- 		0: transmit, 1: receive.
- 	BIT(1): local or remote access:
- 		0: local, 1: remote.
-+	BIT(2): dualfifo case or not(only in Audio cyclic now):
-+		0: not dual fifo case, 1: dualfifo case.
- 	See the SoC's reference manual for all the supported request sources.
- - dma-channels : Number of channels supported by the controller
- 
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -78,6 +78,9 @@
- 
- #define EDMA_TCD_SOFF_SOFF(x)		(x)
- #define EDMA_TCD_NBYTES_NBYTES(x)	(x)
-+#define EDMA_TCD_NBYTES_MLOFF(x)	(x << 10)
-+#define EDMA_TCD_NBYTES_DMLOE		(1 << 30)
-+#define EDMA_TCD_NBYTES_SMLOE		(1 << 31)
- #define EDMA_TCD_SLAST_SLAST(x)		(x)
- #define EDMA_TCD_DADDR_DADDR(x)		(x)
- #define EDMA_TCD_CITER_CITER(x)		((x) & 0x7FFF)
-@@ -102,6 +105,7 @@
- 
- #define ARGS_RX				BIT(0)
- #define ARGS_REMOTE			BIT(1)
-+#define ARGS_DFIFO			BIT(2)
- 
- struct fsl_edma3_hw_tcd {
- 	__le32	saddr;
-@@ -143,6 +147,7 @@ struct fsl_edma3_chan {
- 	int				priority;
- 	int				is_rxchan;
- 	int				is_remote;
-+	int				is_dfifo;
- 	struct dma_pool			*tcd_pool;
- 	u32				chn_real_count;
- 	char				txirq_name[32];
-@@ -454,6 +459,19 @@ void fsl_edma3_fill_tcd(struct fsl_edma3
- 
- 	tcd->soff = cpu_to_le16(EDMA_TCD_SOFF_SOFF(soff));
- 
-+	if (fsl_chan->is_dfifo) {
-+		/* set mloff as -8 */
-+		nbytes |= EDMA_TCD_NBYTES_MLOFF(-8);
-+		/* enable DMLOE/SMLOE */
-+		if (fsl_chan->fsc.dir == DMA_MEM_TO_DEV) {
-+			nbytes |= EDMA_TCD_NBYTES_DMLOE;
-+			nbytes &= ~EDMA_TCD_NBYTES_SMLOE;
-+		} else {
-+			nbytes |= EDMA_TCD_NBYTES_SMLOE;
-+			nbytes &= ~EDMA_TCD_NBYTES_DMLOE;
-+		}
-+	}
-+
- 	tcd->nbytes = cpu_to_le32(EDMA_TCD_NBYTES_NBYTES(nbytes));
- 	tcd->slast = cpu_to_le32(EDMA_TCD_SLAST_SLAST(slast));
- 
-@@ -540,11 +558,17 @@ static struct dma_async_tx_descriptor *f
- 			src_addr = dma_buf_next;
- 			dst_addr = fsl_chan->fsc.dev_addr;
- 			soff = fsl_chan->fsc.addr_width;
--			doff = 0;
-+			if (fsl_chan->is_dfifo)
-+				doff = 4;
-+			else
-+				doff = 0;
- 		} else if (fsl_chan->fsc.dir == DMA_DEV_TO_MEM) {
- 			src_addr = fsl_chan->fsc.dev_addr;
- 			dst_addr = dma_buf_next;
--			soff = 0;
-+			if (fsl_chan->is_dfifo)
-+				soff = 4;
-+			else
-+				soff = 0;
- 			doff = fsl_chan->fsc.addr_width;
- 		} else {
- 			/* DMA_DEV_TO_DEV */
-@@ -715,6 +739,7 @@ static struct dma_chan *fsl_edma3_xlate(
- 			fsl_chan->priority = dma_spec->args[1];
- 			fsl_chan->is_rxchan = dma_spec->args[2] & ARGS_RX;
- 			fsl_chan->is_remote = dma_spec->args[2] & ARGS_REMOTE;
-+			fsl_chan->is_dfifo = dma_spec->args[2] & ARGS_DFIFO;
- 			mutex_unlock(&fsl_edma3->fsl_edma3_mutex);
- 			return chan;
- 		}
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0009-MLK-16327-1-dma-fsl-edma-v3-make-exclusive-channel-n.patch b/target/linux/layerscape/patches-5.4/806-dma-0009-MLK-16327-1-dma-fsl-edma-v3-make-exclusive-channel-n.patch
deleted file mode 100644
index 6c770ed4df..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0009-MLK-16327-1-dma-fsl-edma-v3-make-exclusive-channel-n.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From c5a5706b8a86660505ef0dc863a85596437ca49b Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Wed, 30 Aug 2017 18:51:16 +0800
-Subject: [PATCH] MLK-16327-1: dma: fsl-edma-v3: make exclusive channel name
- for all edma channels
-
-  Since there are multi edmav3 instances on i.mx8, every edma channel name
-is better unique.But so far, all edma channel name is 'edma-channel(id)-
-tx',thus some edma channels which share the same channel id but different
-edma instance will show the same channel name in kernel and this is not
-friendly to debug in kernel.
-  Now the edma channel name(interrupt-names property) is define in dts
-as below:
-        "edmaX-chanX-Xx"
-             |     | |---> receive/transmit, r or t
-             |     |---> channel id, the max number is 32
-             |---> edma controller instance, 0, 1, 2,..etc
-and get below correct name with 'cat /proc/interrupts':
- 43:          0          0          0          0     GICv3 466 Level     edma0-chan8-rx
- 44:          0          0          0          0     GICv3 467 Level     edma0-chan9-tx
- 45:         79          0          0          0     GICv3 468 Level     edma0-chan10-rx
- 46:        311          0          0          0     GICv3 469 Level     edma0-chan11-tx
- 47:          0          0          0          0     GICv3 470 Level     edma0-chan12-rx
- 48:          0          0          0          0     GICv3 471 Level     edma0-chan13-tx
- 49:          0          0          0          0     GICv3 472 Level     edma0-chan14-rx
- 50:          0          0          0          0     GICv3 473 Level     edma0-chan15-tx
- 51:          0          0          0          0     GICv3 406 Level     edma2-chan0-tx
- 52:          0          0          0          0     GICv3 407 Level     edma2-chan1-tx
- 53:          0          0          0          0     GICv3 408 Level     edma2-chan2-tx
- 54:          0          0          0          0     GICv3 409 Level     edma2-chan3-tx
- 55:          0          0          0          0     GICv3 410 Level     edma2-chan4-tx
- 56:          0          0          0          0     GICv3 411 Level     edma2-chan5-tx
- 57:          0          0          0          0     GICv3 442 Level     edma2-chan6-rx, edma2-chan7-tx
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
-(cherry picked from commit af8e197a92c9c024ec4fbfcf543d744e81748773)
----
- .../devicetree/bindings/dma/fsl-edma-v3.txt        | 12 +++++---
- drivers/dma/fsl-edma-v3.c                          | 35 ++++++++++++++++++++--
- 2 files changed, 41 insertions(+), 6 deletions(-)
-
---- a/Documentation/devicetree/bindings/dma/fsl-edma-v3.txt
-+++ b/Documentation/devicetree/bindings/dma/fsl-edma-v3.txt
-@@ -12,8 +12,12 @@ Required properties:
- - reg : Specifies base physical address(s) and size of the eDMA channel registers.
- 	Each eDMA channel has separated register's address and size.
- - interrupts : A list of interrupt-specifiers, each channel has one interrupt.
--- interrupt-names : Should contain:
--	"edma-chan12-tx" - the channel12 transmission interrupt
-+- interrupt-names : Should contain below template:
-+	"edmaX-chanX-Xx"
-+	     |     | |---> receive/transmit, r or t
-+	     |     |---> channel id, the max number is 32
-+	     |---> edma controller instance, 0, 1, 2,..etc
-+
- - #dma-cells : Must be <3>.
- 	The 1st cell specifies the channel ID.
- 	The 2nd cell specifies the channel priority.
-@@ -40,8 +44,8 @@ edma0: dma-controller@40018000 {
- 		     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
- 		     <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
- 		     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>;
--	interrupt-names = "edma-chan12-tx", "edma-chan13-tx",
--			  "edma-chan14-tx", "edma-chan15-tx";
-+	interrupt-names = "edma0-chan12-rx", "edma0-chan13-tx",
-+			  "edma0-chan14-rx", "edma0-chan15-tx";
- 	status = "okay";
- };
- 
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -107,6 +107,10 @@
- #define ARGS_REMOTE			BIT(1)
- #define ARGS_DFIFO			BIT(2)
- 
-+/* channel name template define in dts */
-+#define CHAN_PREFIX			"edma0-chan"
-+#define CHAN_POSFIX			"-tx"
-+
- struct fsl_edma3_hw_tcd {
- 	__le32	saddr;
- 	__le16	soff;
-@@ -806,7 +810,10 @@ static int fsl_edma3_probe(struct platfo
- 	INIT_LIST_HEAD(&fsl_edma3->dma_dev.channels);
- 	for (i = 0; i < fsl_edma3->n_chans; i++) {
- 		struct fsl_edma3_chan *fsl_chan = &fsl_edma3->chans[i];
--		char *txirq_name = fsl_chan->txirq_name;
-+		const char *txirq_name = fsl_chan->txirq_name;
-+		char chanid[3], id_len = 0;
-+		char *p = chanid;
-+		unsigned long val;
- 
- 		fsl_chan->edma3 = fsl_edma3;
- 		/* Get per channel membase */
-@@ -819,7 +826,31 @@ static int fsl_edma3_probe(struct platfo
- 		 * channel0:0x10000, channel1:0x20000... total 32 channels
- 		 */
- 		fsl_chan->hw_chanid = (res->start >> 16) & 0x1f;
--		sprintf(txirq_name, "edma-chan%d-tx", fsl_chan->hw_chanid);
-+
-+		ret = of_property_read_string_index(np, "interrupt-names", i,
-+							&txirq_name);
-+		if (ret) {
-+			dev_err(&pdev->dev, "read interrupt-names fail.\n");
-+			return ret;
-+		}
-+		/* Get channel id length from dts, one-digit or double-digit */
-+		id_len = strlen(txirq_name) - strlen(CHAN_PREFIX) -
-+			 strlen(CHAN_POSFIX);
-+		if (id_len > 2) {
-+			dev_err(&pdev->dev, "%s is edmaX-chanX-tx in dts?\n",
-+				res->name);
-+			return -EINVAL;
-+		}
-+		/* Grab channel id from txirq_name */
-+		strncpy(p, txirq_name + strlen(CHAN_PREFIX), id_len);
-+		*(p + id_len) = '\0';
-+
-+		/* check if the channel id match well with hw_chanid */
-+		ret = kstrtoul(chanid, 0, &val);
-+		if (ret || val != fsl_chan->hw_chanid) {
-+			dev_err(&pdev->dev, "%s,wrong id?\n", txirq_name);
-+			return -EINVAL;
-+		}
- 
- 		/* request channel irq */
- 		fsl_chan->txirq = platform_get_irq_byname(pdev, txirq_name);
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0010-MLK-16437-dma-fsl-edma-v3-fix-kernel-crash-while-edm.patch b/target/linux/layerscape/patches-5.4/806-dma-0010-MLK-16437-dma-fsl-edma-v3-fix-kernel-crash-while-edm.patch
deleted file mode 100644
index 6bc905c049..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0010-MLK-16437-dma-fsl-edma-v3-fix-kernel-crash-while-edm.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From e0d0cdff101b2f00ce1fd420522bd22bb6eebd9f Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Wed, 13 Sep 2017 16:39:49 +0800
-Subject: [PATCH] MLK-16437: dma: fsl-edma-v3: fix kernel crash while edma
- interrupt trigger after channel disabled
-
-edma interrupt may come after channel terminated, so should ignore
-interrupts, else kernel crash as below since fsl_chan->edesc set
-to NULL when terminate.
-
- 606.837306] Unable to handle kernel NULL pointer dereference at virtual address 00000060
-[  606.845411] pgd = ffff000009295000
-[  606.848814] [00000060] *pgd=00000008bfffe003[  606.852906] , *pud=00000008bfffd003
- , *pmd=0000000000000000[  606.858395]
-[  606.859885] Internal error: Oops: 96000006 1 PREEMPT SMP
-[  606.865460] Modules linked in:
-[  606.868522] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.11-03371-g9904ea0 #42
-[  606.875832] Hardware name: Freescale i.MX8QXP LPDDR4 ARM2 (DT)
-[  606.881662] task: ffff000009120680 task.stack: ffff000009110000
-[  606.887588] PC is at fsl_edma3_tx_handler+0x50/0x150
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-Tested-by: Daniel Baluta <daniel.baluta@nxp.com>
-(cherry picked from commit 625afad5a0900bc3e3288510f61647b1d891a5a4)
----
- drivers/dma/fsl-edma-v3.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -689,6 +689,11 @@ static irqreturn_t fsl_edma3_tx_handler(
- 	writel(1, base_addr + EDMA_CH_INT);
- 
- 	spin_lock(&fsl_chan->vchan.lock);
-+
-+	/* Ignore this interrupt since channel has been disabled already */
-+	if (!fsl_chan->edesc)
-+		return IRQ_HANDLED;
-+
- 	if (!fsl_chan->edesc->iscyclic) {
- 		fsl_edma3_get_realcnt(fsl_chan);
- 		list_del(&fsl_chan->edesc->vdesc.node);
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0011-MLK-16482-dma-fsl-edma-v3-Fix-RCU-issue-while-playin.patch b/target/linux/layerscape/patches-5.4/806-dma-0011-MLK-16482-dma-fsl-edma-v3-Fix-RCU-issue-while-playin.patch
deleted file mode 100644
index de37310dd0..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0011-MLK-16482-dma-fsl-edma-v3-Fix-RCU-issue-while-playin.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 46c343673c6eae7909f644f9b67101ce14309670 Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Tue, 19 Sep 2017 11:36:58 +0800
-Subject: [PATCH] MLK-16482: dma: fsl-edma-v3: Fix RCU issue while playing
- Audio
-
-That's caused by commit 593034f1b908 ("MLK-16437: dma: fsl-edma-v3:
-fix kernel crash while edma interrupt trigger after channel disabled").
-Because fsl_chan->vchan.lock will be hold always and trigger RCU report
-as below:
-
-1571.3  Playing WAVE '/mnt/nfs/vte_mx82/../test_stream/esai_stream/48k16bit-six.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 6
-1571.5  [ 4642.698771] INFO: rcu_preempt detected stalls on CPUs/tasks:
-1571.6  [ 4642.704443] 0-...: (1 GPs behind) idle=2c5/140000000000000/0 softirq=155373/155374 fqs=2541
-1571.7  [ 4642.712967] (detected by 2, t=5252 jiffies, g=104259, c=104258, q=22)
-1571.8  [ 4642.719501] Task dump for CPU 0:
-1571.9  [ 4642.722724] aplay R running task 0 15723 15721 0x00000202
-1571.10  [ 4642.729786] Call trace:
-1571.11  [ 4642.732239] [<ffff0000080855e4>] __switch_to+0x8c/0xa0
-1571.12  [ 4642.737379] [<ffff0000084e3a48>] dma_chan_put+0x70/0xa0
-1571.13  [ 4642.742603] [<ffff0000084e3aac>] dma_release_channel+0x34/0xa0
-1571.14  [ 4642.748435] [<ffff000008972240>] fsl_asrc_dma_hw_free+0x38/0x50
-1571.15  [ 4642.754358] [<ffff000008960568>] soc_pcm_hw_free+0x110/0x1a8
-1571.16  [ 4642.760013] [<ffff000008963bcc>] dpcm_fe_dai_hw_free+0x6c/0xe0
-1571.17  [ 4642.765844] [<ffff000008948ae8>] snd_pcm_common_ioctl1+0xb40/0xce0
-1571.18  [ 4642.772028] [<ffff000008948e64>] snd_pcm_playback_ioctl1+0x1dc/0x310
-1571.19  [ 4642.778378] [<ffff000008948fc0>] snd_pcm_playback_ioctl+0x28/0x40
-1571.20  [ 4642.784470] [<ffff0000081ee0a4>] do_vfs_ioctl+0xa4/0x748
-1571.21  [ 4642.789784] [<ffff0000081ee7d4>] SyS_ioctl+0x8c/0xa0
-1571.22  [ 4642.794745] [<ffff000008082f4c>] __sys_trace_return+0x0/0x4
-1571.23  [ 4705.718740] INFO: rcu_preempt detected stalls on CPUs/tasks:
-1571.24  [ 4705.724420] 0-...: (1 GPs behind) idle=2c5/140000000000000/0 softirq=155373/155374 fqs=10407
-1571.25  [ 4705.733030] (detected by 1, t=21010 jiffies, g=104259, c=104258, q=119)
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-Reported-by: Jason Liu <jason.hui.liu@nxp.com>
-Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
-Fixes: 593034f1b908 ("MLK-16437: dma: fsl-edma-v3: fix kernel crash
-while edma interrupt trigger after channel disabled").
-
-(cherry picked from commit e62e8707154f47e168fcfd148e97be4e2f991898)
----
- drivers/dma/fsl-edma-v3.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -692,7 +692,7 @@ static irqreturn_t fsl_edma3_tx_handler(
- 
- 	/* Ignore this interrupt since channel has been disabled already */
- 	if (!fsl_chan->edesc)
--		return IRQ_HANDLED;
-+		goto irq_handled;
- 
- 	if (!fsl_chan->edesc->iscyclic) {
- 		fsl_edma3_get_realcnt(fsl_chan);
-@@ -706,7 +706,7 @@ static irqreturn_t fsl_edma3_tx_handler(
- 
- 	if (!fsl_chan->edesc)
- 		fsl_edma3_xfer_desc(fsl_chan);
--
-+irq_handled:
- 	spin_unlock(&fsl_chan->vchan.lock);
- 
- 	return IRQ_HANDLED;
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0012-MLK-17094-dma-fsl-edma-v3-add-suspend-resume-to-rest.patch b/target/linux/layerscape/patches-5.4/806-dma-0012-MLK-17094-dma-fsl-edma-v3-add-suspend-resume-to-rest.patch
deleted file mode 100644
index e9ca236556..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0012-MLK-17094-dma-fsl-edma-v3-add-suspend-resume-to-rest.patch
+++ /dev/null
@@ -1,192 +0,0 @@
-From 411a2f6ad13bd58646de34a340553232044f0951 Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Mon, 4 Dec 2017 15:35:09 +0800
-Subject: [PATCH] MLK-17094 dma: fsl-edma-v3: add suspend/resume to restore
- back channel registers
-
-Add suspend to save channel registers and resume to restore them back since
-edmav3 may powered off in suspend.
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-(cherry picked from commit 7eda1ae538ec7e7c0f993b3ea91805459f3dedd3)
----
- drivers/dma/fsl-edma-v3.c | 86 +++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 86 insertions(+)
-
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -111,6 +111,11 @@
- #define CHAN_PREFIX			"edma0-chan"
- #define CHAN_POSFIX			"-tx"
- 
-+enum fsl_edma3_pm_state {
-+	RUNNING = 0,
-+	SUSPENDED,
-+};
-+
- struct fsl_edma3_hw_tcd {
- 	__le32	saddr;
- 	__le16	soff;
-@@ -142,6 +147,8 @@ struct fsl_edma3_slave_config {
- struct fsl_edma3_chan {
- 	struct virt_dma_chan		vchan;
- 	enum dma_status			status;
-+	enum fsl_edma3_pm_state		pm_state;
-+	bool				idle;
- 	struct fsl_edma3_engine		*edma3;
- 	struct fsl_edma3_desc		*edesc;
- 	struct fsl_edma3_slave_config	fsc;
-@@ -165,11 +172,18 @@ struct fsl_edma3_desc {
- 	struct fsl_edma3_sw_tcd		tcd[];
- };
- 
-+struct fsl_edma3_reg_save {
-+	u32 csr;
-+	u32 sbr;
-+};
-+
- struct fsl_edma3_engine {
- 	struct dma_device	dma_dev;
- 	struct mutex		fsl_edma3_mutex;
- 	u32			n_chans;
- 	int			errirq;
-+	#define MAX_CHAN_NUM	32
-+	struct fsl_edma3_reg_save edma_regs[MAX_CHAN_NUM];
- 	bool			swap;	/* remote/local swapped on Audio edma */
- 	struct fsl_edma3_chan	chans[];
- };
-@@ -266,6 +280,7 @@ static int fsl_edma3_terminate_all(struc
- 	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
- 	fsl_edma3_disable_request(fsl_chan);
- 	fsl_chan->edesc = NULL;
-+	fsl_chan->idle = true;
- 	vchan_get_all_descriptors(&fsl_chan->vchan, &head);
- 	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
- 	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
-@@ -281,6 +296,7 @@ static int fsl_edma3_pause(struct dma_ch
- 	if (fsl_chan->edesc) {
- 		fsl_edma3_disable_request(fsl_chan);
- 		fsl_chan->status = DMA_PAUSED;
-+		fsl_chan->idle = true;
- 	}
- 	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
- 	return 0;
-@@ -295,6 +311,7 @@ static int fsl_edma3_resume(struct dma_c
- 	if (fsl_chan->edesc) {
- 		fsl_edma3_enable_request(fsl_chan);
- 		fsl_chan->status = DMA_IN_PROGRESS;
-+		fsl_chan->idle = false;
- 	}
- 	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
- 	return 0;
-@@ -664,6 +681,7 @@ static void fsl_edma3_xfer_desc(struct f
- 	fsl_edma3_set_tcd_regs(fsl_chan, fsl_chan->edesc->tcd[0].vtcd);
- 	fsl_edma3_enable_request(fsl_chan);
- 	fsl_chan->status = DMA_IN_PROGRESS;
-+	fsl_chan->idle = false;
- }
- 
- static size_t fsl_edma3_desc_residue(struct fsl_edma3_chan *fsl_chan,
-@@ -700,6 +718,7 @@ static irqreturn_t fsl_edma3_tx_handler(
- 		vchan_cookie_complete(&fsl_chan->edesc->vdesc);
- 		fsl_chan->edesc = NULL;
- 		fsl_chan->status = DMA_COMPLETE;
-+		fsl_chan->idle = true;
- 	} else {
- 		vchan_cyclic_callback(&fsl_chan->edesc->vdesc);
- 	}
-@@ -719,6 +738,12 @@ static void fsl_edma3_issue_pending(stru
- 
- 	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
- 
-+	if (unlikely(fsl_chan->pm_state != RUNNING)) {
-+		spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-+		/* cannot submit due to suspend */
-+		return;
-+	}
-+
- 	if (vchan_issue_pending(&fsl_chan->vchan) && !fsl_chan->edesc)
- 		fsl_edma3_xfer_desc(fsl_chan);
- 
-@@ -821,6 +846,8 @@ static int fsl_edma3_probe(struct platfo
- 		unsigned long val;
- 
- 		fsl_chan->edma3 = fsl_edma3;
-+		fsl_chan->pm_state = RUNNING;
-+		fsl_chan->idle = true;
- 		/* Get per channel membase */
- 		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
- 		fsl_chan->membase = devm_ioremap_resource(&pdev->dev, res);
-@@ -932,6 +959,64 @@ static int fsl_edma3_remove(struct platf
- 	return 0;
- }
- 
-+static int fsl_edma3_suspend_late(struct device *dev)
-+{
-+	struct fsl_edma3_engine *fsl_edma = dev_get_drvdata(dev);
-+	struct fsl_edma3_chan *fsl_chan;
-+	unsigned long flags;
-+	void __iomem *addr;
-+	int i;
-+
-+	for (i = 0; i < fsl_edma->n_chans; i++) {
-+		fsl_chan = &fsl_edma->chans[i];
-+		addr = fsl_chan->membase;
-+
-+		spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-+		fsl_edma->edma_regs[i].csr = readl(addr + EDMA_CH_CSR);
-+		fsl_edma->edma_regs[i].sbr = readl(addr + EDMA_CH_SBR);
-+		/* Make sure chan is idle or will force disable. */
-+		if (unlikely(!fsl_chan->idle)) {
-+			dev_warn(dev, "WARN: There is non-idle channel.");
-+			fsl_edma3_disable_request(fsl_chan);
-+		}
-+		fsl_chan->pm_state = SUSPENDED;
-+		spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-+	}
-+
-+	return 0;
-+}
-+
-+static int fsl_edma3_resume_early(struct device *dev)
-+{
-+	struct fsl_edma3_engine *fsl_edma = dev_get_drvdata(dev);
-+	struct fsl_edma3_chan *fsl_chan;
-+	void __iomem *addr;
-+	unsigned long flags;
-+	int i;
-+
-+	for (i = 0; i < fsl_edma->n_chans; i++) {
-+		fsl_chan = &fsl_edma->chans[i];
-+		addr = fsl_chan->membase;
-+
-+		spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-+		writel(fsl_edma->edma_regs[i].csr, addr + EDMA_CH_CSR);
-+		writel(fsl_edma->edma_regs[i].sbr, addr + EDMA_CH_SBR);
-+		/* restore tcd if this channel not terminated before suspend */
-+		if (fsl_chan->edesc)
-+			fsl_edma3_set_tcd_regs(fsl_chan,
-+						fsl_chan->edesc->tcd[0].vtcd);
-+		fsl_chan->pm_state = RUNNING;
-+		spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct dev_pm_ops fsl_edma3_pm_ops = {
-+	.suspend_late   = fsl_edma3_suspend_late,
-+	.resume_early   = fsl_edma3_resume_early,
-+};
-+
- static const struct of_device_id fsl_edma3_dt_ids[] = {
- 	{ .compatible = "fsl,imx8qm-edma", },
- 	{ .compatible = "fsl,imx8qm-adma", },
-@@ -943,6 +1028,7 @@ static struct platform_driver fsl_edma3_
- 	.driver		= {
- 		.name	= "fsl-edma-v3",
- 		.of_match_table = fsl_edma3_dt_ids,
-+		.pm     = &fsl_edma3_pm_ops,
- 	},
- 	.probe          = fsl_edma3_probe,
- 	.remove		= fsl_edma3_remove,
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0013-MLK-17782-dma-fsl-edma-v3-fix-issue-reported-by-Cove.patch b/target/linux/layerscape/patches-5.4/806-dma-0013-MLK-17782-dma-fsl-edma-v3-fix-issue-reported-by-Cove.patch
deleted file mode 100644
index 05b9852bec..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0013-MLK-17782-dma-fsl-edma-v3-fix-issue-reported-by-Cove.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 82b892c3df4893b123681b2ba725c0861e0112a4 Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Tue, 13 Mar 2018 02:03:09 +0800
-Subject: [PATCH] MLK-17782 dma: fsl-edma-v3: fix issue reported by Coverity
-
-Fix below issue reported by Coverity, actually, don't need this
-condition check here, remove it.
-
-CID undefined (#1 of 1): Wrong operator used (CONSTANT_EXPRESSION_RESULT)operator_confusion:
-(16UL /* 1UL << 4 */) | (__u16)(__le16)tcd->csr is always 1/true regardless of the values of its operand.
-This occurs as the logical first operand of "&&".
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
-(cherry picked from commit ab942110975cadcde57ab1110df03f526bd3fec5)
----
- drivers/dma/fsl-edma-v3.c | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -1,7 +1,7 @@
- /*
-  * drivers/dma/fsl-edma3-v3.c
-  *
-- * Copyright 2017 NXP .
-+ * Copyright 2017-2018 NXP .
-  *
-  * Driver for the Freescale eDMA engine v3. This driver based on fsl-edma3.c
-  * but changed to meet the IP change on i.MX8QM: every dma channel is specific
-@@ -451,9 +451,7 @@ static void fsl_edma3_set_tcd_regs(struc
- 	writel(le32_to_cpu(tcd->dlast_sga), addr + EDMA_TCD_DLAST_SGA);
- 
- 	/* Must clear CHa_CSR[DONE] bit before enable TCDa_CSR[ESG] */
--	if ((EDMA_TCD_CSR_E_SG | le16_to_cpu(tcd->csr)) &&
--		EDMA_CH_CSR_DONE | readl(addr + EDMA_CH_CSR))
--		writel(EDMA_CH_CSR_DONE, addr + EDMA_CH_CSR);
-+	writel(readl(addr + EDMA_CH_CSR), addr + EDMA_CH_CSR);
- 
- 	writew(le16_to_cpu(tcd->csr), addr + EDMA_TCD_CSR);
- }
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0014-MLK-18248-dma-fsl-edma-v3-avoid-touch-unused-edma-ch.patch b/target/linux/layerscape/patches-5.4/806-dma-0014-MLK-18248-dma-fsl-edma-v3-avoid-touch-unused-edma-ch.patch
deleted file mode 100644
index 828d673c2a..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0014-MLK-18248-dma-fsl-edma-v3-avoid-touch-unused-edma-ch.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 13d8031dd480b23620923c39400831f7edc68276 Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Thu, 10 May 2018 01:02:01 +0800
-Subject: [PATCH] MLK-18248: dma: fsl-edma-v3: avoid touch unused edma channel
-
-Avoid touch unused edma channel register in susped/resume, otherwise,
-kernel crash if XRDC enabled in scfw.
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-Acked-by: Fugang Duan <fugang.duan@nxp.com>
-(cherry picked from commit aa221c4aba34c6ce1ce5f561fa073bb8297cc0ff)
----
- drivers/dma/fsl-edma-v3.c | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -149,6 +149,7 @@ struct fsl_edma3_chan {
- 	enum dma_status			status;
- 	enum fsl_edma3_pm_state		pm_state;
- 	bool				idle;
-+	bool				used;
- 	struct fsl_edma3_engine		*edma3;
- 	struct fsl_edma3_desc		*edesc;
- 	struct fsl_edma3_slave_config	fsc;
-@@ -226,6 +227,8 @@ static void fsl_edma3_enable_request(str
- 
- 	val |= EDMA_CH_CSR_ERQ;
- 	writel(val, addr + EDMA_CH_CSR);
-+
-+	fsl_chan->used = true;
- }
- 
- static void fsl_edma3_disable_request(struct fsl_edma3_chan *fsl_chan)
-@@ -281,6 +284,7 @@ static int fsl_edma3_terminate_all(struc
- 	fsl_edma3_disable_request(fsl_chan);
- 	fsl_chan->edesc = NULL;
- 	fsl_chan->idle = true;
-+	fsl_chan->used = false;
- 	vchan_get_all_descriptors(&fsl_chan->vchan, &head);
- 	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
- 	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
-@@ -805,6 +809,7 @@ static void fsl_edma3_free_chan_resource
- 	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
- 	dma_pool_destroy(fsl_chan->tcd_pool);
- 	fsl_chan->tcd_pool = NULL;
-+	fsl_chan->used = false;
- }
- 
- static int fsl_edma3_probe(struct platform_device *pdev)
-@@ -900,6 +905,7 @@ static int fsl_edma3_probe(struct platfo
- 
- 		fsl_chan->vchan.desc_free = fsl_edma3_free_desc;
- 		vchan_init(&fsl_chan->vchan, &fsl_edma3->dma_dev);
-+		fsl_chan->used = false;
- 	}
- 
- 	mutex_init(&fsl_edma3->fsl_edma3_mutex);
-@@ -969,6 +975,8 @@ static int fsl_edma3_suspend_late(struct
- 		fsl_chan = &fsl_edma->chans[i];
- 		addr = fsl_chan->membase;
- 
-+		if (!fsl_chan->used)
-+			continue;
- 		spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
- 		fsl_edma->edma_regs[i].csr = readl(addr + EDMA_CH_CSR);
- 		fsl_edma->edma_regs[i].sbr = readl(addr + EDMA_CH_SBR);
-@@ -996,6 +1004,9 @@ static int fsl_edma3_resume_early(struct
- 		fsl_chan = &fsl_edma->chans[i];
- 		addr = fsl_chan->membase;
- 
-+		if (!fsl_chan->used)
-+			continue;
-+
- 		spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
- 		writel(fsl_edma->edma_regs[i].csr, addr + EDMA_CH_CSR);
- 		writel(fsl_edma->edma_regs[i].sbr, addr + EDMA_CH_SBR);
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0015-MLK-19022-2-dmaengine-fsl-edma-v3-add-device_synchro.patch b/target/linux/layerscape/patches-5.4/806-dma-0015-MLK-19022-2-dmaengine-fsl-edma-v3-add-device_synchro.patch
deleted file mode 100644
index 5e1eb8b83e..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0015-MLK-19022-2-dmaengine-fsl-edma-v3-add-device_synchro.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 0ae3e11113b3132167308c26259f25b504da6ddc Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Tue, 24 Jul 2018 22:12:24 +0800
-Subject: [PATCH] MLK-19022-2: dmaengine: fsl-edma-v3: add device_synchronize
-
-Add device_synchronize for edma driver, since some driver such as
-Audio need it to make sure dma done callback never come out after
-resource related with dma channel free-ed by Audio driver. Android
-team report such issue on MA-12087.
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-(cherry picked from commit 483519c063b08fc1ce0dd297b6c186799cf639d6)
-(cherry picked from commit 29ab274aca01ef8f5fc70e8c0a6d43a5bdb3c689)
----
- drivers/dma/fsl-edma-v3.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -812,6 +812,13 @@ static void fsl_edma3_free_chan_resource
- 	fsl_chan->used = false;
- }
- 
-+static void fsl_edma3_synchronize(struct dma_chan *chan)
-+{
-+	struct fsl_edma3_chan *fsl_chan = to_fsl_edma3_chan(chan);
-+
-+	vchan_synchronize(&fsl_chan->vchan);
-+}
-+
- static int fsl_edma3_probe(struct platform_device *pdev)
- {
- 	struct device_node *np = pdev->dev.of_node;
-@@ -927,6 +934,7 @@ static int fsl_edma3_probe(struct platfo
- 	fsl_edma3->dma_dev.device_resume = fsl_edma3_resume;
- 	fsl_edma3->dma_dev.device_terminate_all = fsl_edma3_terminate_all;
- 	fsl_edma3->dma_dev.device_issue_pending = fsl_edma3_issue_pending;
-+	fsl_edma3->dma_dev.device_synchronize = fsl_edma3_synchronize;
- 
- 	fsl_edma3->dma_dev.src_addr_widths = FSL_EDMA_BUSWIDTHS;
- 	fsl_edma3->dma_dev.dst_addr_widths = FSL_EDMA_BUSWIDTHS;
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0016-MLK-19931-1-dmaengine-fsl-edma-v3-fix-potential-kern.patch b/target/linux/layerscape/patches-5.4/806-dma-0016-MLK-19931-1-dmaengine-fsl-edma-v3-fix-potential-kern.patch
deleted file mode 100644
index 28a59d4db2..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0016-MLK-19931-1-dmaengine-fsl-edma-v3-fix-potential-kern.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 4967ec844a52498af050b1176fedeca37aca111e Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Tue, 16 Oct 2018 01:06:29 +0800
-Subject: [PATCH] MLK-19931-1: dmaengine: fsl-edma-v3: fix potential kernel
- crash in cyclic
-
-  There is one potential race condition in virt-dma framework as below:
-terminate dma channel after the last dma done interrupt, but before
-vchan_complete tasklet scheduled, thus the free-ed 'vd' (free in
-fsl_edma3_terminate_all) maybe still be touched in vchan_complete()
-which cause NULL pointer crash.
-  Kernel community noticed this issue and fix it at virt-dma level:
-https://patchwork.kernel.org/patch/10057791/. To avoid backport too
-much patches, set 'vc->cyclic = NULL' in terminate dma channel
-interfaces to fix such issue easily.
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-Acked-by: Fugang Duan <fugang.duan@nxp.com>
-(cherry picked from commit 18c9083826400a2ef731496391a0b5e71d461a5f)
----
- drivers/dma/fsl-edma-v3.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -285,6 +285,7 @@ static int fsl_edma3_terminate_all(struc
- 	fsl_chan->edesc = NULL;
- 	fsl_chan->idle = true;
- 	fsl_chan->used = false;
-+	fsl_chan->vchan.cyclic = NULL;
- 	vchan_get_all_descriptors(&fsl_chan->vchan, &head);
- 	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
- 	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0017-MLK-20205-1-dmaengine-fsl-edma-v3-fix-NULL-pointer-d.patch b/target/linux/layerscape/patches-5.4/806-dma-0017-MLK-20205-1-dmaengine-fsl-edma-v3-fix-NULL-pointer-d.patch
deleted file mode 100644
index aff6ac083c..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0017-MLK-20205-1-dmaengine-fsl-edma-v3-fix-NULL-pointer-d.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 0059c7ed6c11254f214a07357bbf87296cde446f Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Wed, 7 Nov 2018 22:19:07 +0800
-Subject: [PATCH] MLK-20205-1: dmaengine: fsl-edma-v3: fix NULL pointer
- dereference
-
-Fix 'null pointer dereferences issue' reported by coverity(CID-1477441).
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-Reviewed-by: Anson Huang <Anson.Huang@nxp.com>
-(cherry picked from commit 5343c0018af0af2eb3bb90c5a75e765b851a2c12)
----
- drivers/dma/fsl-edma-v3.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -419,7 +419,7 @@ static enum dma_status fsl_edma3_tx_stat
- 	if (fsl_chan->edesc && cookie == fsl_chan->edesc->vdesc.tx.cookie)
- 		txstate->residue = fsl_edma3_desc_residue(fsl_chan, vdesc,
- 								true);
--	else if (vdesc)
-+	else if (fsl_chan->edesc && vdesc)
- 		txstate->residue = fsl_edma3_desc_residue(fsl_chan, vdesc,
- 								false);
- 	else
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0018-dma-imx-add-the-32bit-dma-limitation.patch b/target/linux/layerscape/patches-5.4/806-dma-0018-dma-imx-add-the-32bit-dma-limitation.patch
deleted file mode 100644
index 7c1f4f94cd..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0018-dma-imx-add-the-32bit-dma-limitation.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From bd7176b9cb91671b248fbdef0c65d2893fd78226 Mon Sep 17 00:00:00 2001
-From: Richard Zhu <hongxing.zhu@nxp.com>
-Date: Fri, 25 Jan 2019 18:02:22 +0800
-Subject: [PATCH] dma: imx: add the 32bit dma limitation
-
-Since the imx8qm/qxp hsio only supports up to 32bit
-dma capability.
-Add the 32bit dma limitation into dma binding document.
-
-Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
----
- Documentation/devicetree/bindings/dma/fsl-imx-dma.txt | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
-+++ b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
-@@ -16,6 +16,21 @@ Optional properties:
- - #dma-channels : Number of DMA channels supported. Should be 16.
- - #dma-requests : Number of DMA requests supported.
- 
-+* DMA capability limitation
-+
-+Specify the DMA capability limitations.
-+For example, some SoCs only support up to 32bit DMA capability, although
-+they are 64bit SoCs.
-+
-+- only-dma-mask32: 1 means that the SoCs only suppot up to 32bit DMA
-+  capability.
-+
-+Example:
-+	dma_cap: dma_cap {
-+		compatible = "dma-capability";
-+		only-dma-mask32 = <1>;
-+	};
-+
- Example:
- 
- 	dma: dma@10001000 {
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0019-dmaengine-fsl-edma-calculate-the-real-count-for-slav.patch b/target/linux/layerscape/patches-5.4/806-dma-0019-dmaengine-fsl-edma-calculate-the-real-count-for-slav.patch
deleted file mode 100644
index f8bbaaffa1..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0019-dmaengine-fsl-edma-calculate-the-real-count-for-slav.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 7b126c5fbddf179c7d2c2393100329aa45cd8ac4 Mon Sep 17 00:00:00 2001
-From: Fugang Duan <fugang.duan@nxp.com>
-Date: Fri, 9 Aug 2019 15:14:08 +0800
-Subject: [PATCH] dmaengine: fsl-edma: calculate the real count for slave sg
-
-Calculate the rela count for current slave sg after eDMA stop.
-
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
----
- drivers/dma/fsl-edma-common.c | 11 ++++++++++-
- drivers/dma/fsl-edma-common.h |  2 ++
- drivers/dma/fsl-edma.c        |  1 +
- 3 files changed, 13 insertions(+), 1 deletion(-)
-
---- a/drivers/dma/fsl-edma-common.c
-+++ b/drivers/dma/fsl-edma-common.c
-@@ -305,6 +305,11 @@ static size_t fsl_edma_desc_residue(stru
- 	return len;
- }
- 
-+void fsl_edma_get_realcnt(struct fsl_edma_chan *fsl_chan)
-+{
-+	fsl_chan->chn_real_count = fsl_edma_desc_residue(fsl_chan, NULL, true);
-+}
-+
- enum dma_status fsl_edma_tx_status(struct dma_chan *chan,
- 		dma_cookie_t cookie, struct dma_tx_state *txstate)
- {
-@@ -314,8 +319,12 @@ enum dma_status fsl_edma_tx_status(struc
- 	unsigned long flags;
- 
- 	status = dma_cookie_status(chan, cookie, txstate);
--	if (status == DMA_COMPLETE)
-+	if (status == DMA_COMPLETE) {
-+		spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-+		txstate->residue = fsl_chan->chn_real_count;
-+		spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
- 		return status;
-+	}
- 
- 	if (!txstate)
- 		return fsl_chan->status;
---- a/drivers/dma/fsl-edma-common.h
-+++ b/drivers/dma/fsl-edma-common.h
-@@ -126,6 +126,7 @@ struct fsl_edma_chan {
- 	u32				dma_dev_size;
- 	enum dma_data_direction		dma_dir;
- 	char				chan_name[16];
-+	u32				chn_real_count;
- };
- 
- struct fsl_edma_desc {
-@@ -229,6 +230,7 @@ int fsl_edma_pause(struct dma_chan *chan
- int fsl_edma_resume(struct dma_chan *chan);
- int fsl_edma_slave_config(struct dma_chan *chan,
- 				 struct dma_slave_config *cfg);
-+void fsl_edma_get_realcnt(struct fsl_edma_chan *fsl_chan);
- enum dma_status fsl_edma_tx_status(struct dma_chan *chan,
- 		dma_cookie_t cookie, struct dma_tx_state *txstate);
- struct dma_async_tx_descriptor *fsl_edma_prep_dma_cyclic(
---- a/drivers/dma/fsl-edma.c
-+++ b/drivers/dma/fsl-edma.c
-@@ -53,6 +53,7 @@ static irqreturn_t fsl_edma_tx_handler(i
- 			}
- 
- 			if (!fsl_chan->edesc->iscyclic) {
-+				fsl_edma_get_realcnt(fsl_chan);
- 				list_del(&fsl_chan->edesc->vdesc.node);
- 				vchan_cookie_complete(&fsl_chan->edesc->vdesc);
- 				fsl_chan->edesc = NULL;
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0020-MLK-22798-1-dmaengine-fsl-edma-v3-do-not-enable-inte.patch b/target/linux/layerscape/patches-5.4/806-dma-0020-MLK-22798-1-dmaengine-fsl-edma-v3-do-not-enable-inte.patch
deleted file mode 100644
index fbfb95e8c9..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0020-MLK-22798-1-dmaengine-fsl-edma-v3-do-not-enable-inte.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From dcb4deb92738a2fd3981550dbf18ae96e22bbe80 Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Wed, 23 Oct 2019 00:33:42 +0800
-Subject: [PATCH] MLK-22798-1: dmaengine: fsl-edma-v3: do not enable interrupt
- in dev_2_dev
-
-Do not enable interrupt in dev_2_dev with cyclic case, since in such
-case no any interrupt needed. Otherwise many interrupt will come in
-every 64 words transfered in ASRC case, which cause heavy system
-loading.
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
-(cherry picked from commit f0a3172e1ceb04c46377160486ad7dc6ee022850)
----
- drivers/dma/fsl-edma-v3.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -560,6 +560,7 @@ static struct dma_async_tx_descriptor *f
- 	int sg_len, i;
- 	u32 src_addr, dst_addr, last_sg, nbytes;
- 	u16 soff, doff, iter;
-+	bool major_int = true;
- 
- 	sg_len = buf_len / period_len;
- 	fsl_desc = fsl_edma3_alloc_desc(fsl_chan, sg_len);
-@@ -600,11 +601,12 @@ static struct dma_async_tx_descriptor *f
- 			dst_addr = fsl_chan->fsc.dev_addr;
- 			soff = 0;
- 			doff = 0;
-+			major_int = false;
- 		}
- 
- 		fsl_edma3_fill_tcd(fsl_chan, fsl_desc->tcd[i].vtcd, src_addr,
- 				dst_addr, fsl_chan->fsc.attr, soff, nbytes, 0,
--				iter, iter, doff, last_sg, true, false, true);
-+				iter, iter, doff, last_sg, major_int, false, true);
- 		dma_buf_next += period_len;
- 	}
- 
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0021-MLK-21443-dmaengine-fsl-edma-v3-clear-pending-irq-be.patch b/target/linux/layerscape/patches-5.4/806-dma-0021-MLK-21443-dmaengine-fsl-edma-v3-clear-pending-irq-be.patch
deleted file mode 100644
index 7bcbe46e3e..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0021-MLK-21443-dmaengine-fsl-edma-v3-clear-pending-irq-be.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From 63c3fd953a620873c722494355a345643607c0a2 Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Thu, 11 Apr 2019 14:36:37 +0800
-Subject: [PATCH] MLK-21443: dmaengine: fsl-edma-v3: clear pending irq before
- request irq
-
-edma interrupt maybe happened during reboot or watchdog reset, meanwhile
-gic never power down on i.mx8QM/QXP, thus the unexpect irq will come in
-once edma driver request irq at probe phase. Unfortunately, at that time
-that edma channel's power domain which power-up by customer driver such
-as audio/uart driver may not be ready, so kernel panic triggered once
-touch such edma registers which still not power up in interrupt handler.
-Move request irq from probe to alloc dma channel so that edma channel's
-power domain has already been powered, besides, clear meaningless
-interrupt before request irq.
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-Acked-by: Fugang Duan <fugang.duan@nxp.com>
-(cherry picked from commit 0a0d8f8b944094342fda18f23f3ac13b8a73871d)
----
- drivers/dma/fsl-edma-v3.c | 34 ++++++++++++++++++++++------------
- 1 file changed, 22 insertions(+), 12 deletions(-)
-
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -162,7 +162,8 @@ struct fsl_edma3_chan {
- 	int				is_dfifo;
- 	struct dma_pool			*tcd_pool;
- 	u32				chn_real_count;
--	char				txirq_name[32];
-+	char                            txirq_name[32];
-+	struct platform_device		*pdev;
- };
- 
- struct fsl_edma3_desc {
-@@ -180,6 +181,7 @@ struct fsl_edma3_reg_save {
- 
- struct fsl_edma3_engine {
- 	struct dma_device	dma_dev;
-+	unsigned long		irqflag;
- 	struct mutex		fsl_edma3_mutex;
- 	u32			n_chans;
- 	int			errirq;
-@@ -790,10 +792,23 @@ static struct dma_chan *fsl_edma3_xlate(
- static int fsl_edma3_alloc_chan_resources(struct dma_chan *chan)
- {
- 	struct fsl_edma3_chan *fsl_chan = to_fsl_edma3_chan(chan);
-+	struct platform_device *pdev = fsl_chan->pdev;
-+	int ret;
- 
- 	fsl_chan->tcd_pool = dma_pool_create("tcd_pool", chan->device->dev,
- 				sizeof(struct fsl_edma3_hw_tcd),
- 				32, 0);
-+	/* clear meaningless pending irq anyway */
-+	writel(1, fsl_chan->membase + EDMA_CH_INT);
-+	ret = devm_request_irq(&pdev->dev, fsl_chan->txirq,
-+			fsl_edma3_tx_handler, fsl_chan->edma3->irqflag,
-+			fsl_chan->txirq_name, fsl_chan);
-+	if (ret) {
-+		dev_err(&pdev->dev, "Can't register %s IRQ.\n",
-+			fsl_chan->txirq_name);
-+		return ret;
-+	}
-+
- 	return 0;
- }
- 
-@@ -803,6 +818,8 @@ static void fsl_edma3_free_chan_resource
- 	unsigned long flags;
- 	LIST_HEAD(head);
- 
-+	devm_free_irq(&fsl_chan->pdev->dev, fsl_chan->txirq, fsl_chan);
-+
- 	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
- 	fsl_edma3_disable_request(fsl_chan);
- 	fsl_chan->edesc = NULL;
-@@ -830,7 +847,6 @@ static int fsl_edma3_probe(struct platfo
- 	struct resource *res;
- 	int len, chans;
- 	int ret, i;
--	unsigned long irqflag = 0;
- 
- 	ret = of_property_read_u32(np, "dma-channels", &chans);
- 	if (ret) {
-@@ -845,7 +861,7 @@ static int fsl_edma3_probe(struct platfo
- 
- 	/* Audio edma rx/tx channel shared interrupt */
- 	if (of_property_read_bool(np, "shared-interrupt"))
--		irqflag = IRQF_SHARED;
-+		fsl_edma3->irqflag = IRQF_SHARED;
- 
- 	fsl_edma3->swap = of_device_is_compatible(np, "fsl,imx8qm-adma");
- 	fsl_edma3->n_chans = chans;
-@@ -853,12 +869,13 @@ static int fsl_edma3_probe(struct platfo
- 	INIT_LIST_HEAD(&fsl_edma3->dma_dev.channels);
- 	for (i = 0; i < fsl_edma3->n_chans; i++) {
- 		struct fsl_edma3_chan *fsl_chan = &fsl_edma3->chans[i];
--		const char *txirq_name = fsl_chan->txirq_name;
-+		const char *txirq_name;
- 		char chanid[3], id_len = 0;
- 		char *p = chanid;
- 		unsigned long val;
- 
- 		fsl_chan->edma3 = fsl_edma3;
-+		fsl_chan->pdev = pdev;
- 		fsl_chan->pm_state = RUNNING;
- 		fsl_chan->idle = true;
- 		/* Get per channel membase */
-@@ -904,14 +921,7 @@ static int fsl_edma3_probe(struct platfo
- 			return fsl_chan->txirq;
- 		}
- 
--		ret = devm_request_irq(&pdev->dev, fsl_chan->txirq,
--				fsl_edma3_tx_handler, irqflag, txirq_name,
--				fsl_chan);
--		if (ret) {
--			dev_err(&pdev->dev, "Can't register %s IRQ.\n",
--				txirq_name);
--			return ret;
--		}
-+		memcpy(fsl_chan->txirq_name, txirq_name, strlen(txirq_name));
- 
- 		fsl_chan->vchan.desc_free = fsl_edma3_free_desc;
- 		vchan_init(&fsl_chan->vchan, &fsl_edma3->dma_dev);
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0022-MLK-22284-1-dmaengine-fsl-edma-v3-add-power-domains-.patch b/target/linux/layerscape/patches-5.4/806-dma-0022-MLK-22284-1-dmaengine-fsl-edma-v3-add-power-domains-.patch
deleted file mode 100644
index 8c7fc44b91..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0022-MLK-22284-1-dmaengine-fsl-edma-v3-add-power-domains-.patch
+++ /dev/null
@@ -1,170 +0,0 @@
-From 9050c0619cdf5399d19e3683d6fb1db355dda110 Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Wed, 17 Apr 2019 17:05:42 +0800
-Subject: [PATCH] MLK-22284-1 dmaengine: fsl-edma-v3: add power domains for
- each channel
-
-Add power domains for each dma channel so that edma channel could
-know the power state of every dma channel anytime and clear easily
-unexpected interrupt which triggered before the last partition reset.
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-Reviewed-by: S.j. Wang <shengjiu.wang@nxp.com>
-(cherry picked from commit 0b6da46b7bdb2284e24757d48466268b9feb5b7c)
----
- .../devicetree/bindings/dma/fsl-edma-v3.txt        | 11 +++-
- drivers/dma/fsl-edma-v3.c                          | 58 +++++++++++++++++++++-
- 2 files changed, 67 insertions(+), 2 deletions(-)
-
---- a/Documentation/devicetree/bindings/dma/fsl-edma-v3.txt
-+++ b/Documentation/devicetree/bindings/dma/fsl-edma-v3.txt
-@@ -30,6 +30,8 @@ Required properties:
- 		0: not dual fifo case, 1: dualfifo case.
- 	See the SoC's reference manual for all the supported request sources.
- - dma-channels : Number of channels supported by the controller
-+- power-domains: Power domains for edma channel used.
-+- power-domain-names: Power domains name for edma channel used.
- 
- Examples:
- edma0: dma-controller@40018000 {
-@@ -46,6 +48,12 @@ edma0: dma-controller@40018000 {
- 		     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>;
- 	interrupt-names = "edma0-chan12-rx", "edma0-chan13-tx",
- 			  "edma0-chan14-rx", "edma0-chan15-tx";
-+	power-domains = <&pd IMX_SC_R_DMA_0_CH12>,
-+			<&pd IMX_SC_R_DMA_0_CH13>,
-+			<&pd IMX_SC_R_DMA_0_CH14>,
-+			<&pd IMX_SC_R_DMA_0_CH15>;
-+	power-domain-names = "edma0-chan12", "edma0-chan13",
-+			     "edma0-chan14", "edma0-chan15";
- 	status = "okay";
- };
- 
-@@ -65,7 +73,8 @@ lpuart1: serial@5a070000 {
- 	clock-names = "ipg";
- 	assigned-clock-names = <&clk IMX8QM_UART1_CLK>;
- 	assigned-clock-rates = <80000000>;
--	power-domains = <&pd_dma_lpuart1>;
-+	power-domains = <&pd IMX_SC_R_UART_1>,
-+	power-domain-names = "uart";
- 	dma-names = "tx","rx";
- 	dmas = <&edma0 15 0 0>,
- 		<&edma0 14 0 1>;
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -27,6 +27,8 @@
- #include <linux/of_address.h>
- #include <linux/of_irq.h>
- #include <linux/of_dma.h>
-+#include <linux/pm_runtime.h>
-+#include <linux/pm_domain.h>
- 
- #include "virt-dma.h"
- 
-@@ -164,6 +166,7 @@ struct fsl_edma3_chan {
- 	u32				chn_real_count;
- 	char                            txirq_name[32];
- 	struct platform_device		*pdev;
-+	struct device			*dev;
- };
- 
- struct fsl_edma3_desc {
-@@ -798,8 +801,10 @@ static int fsl_edma3_alloc_chan_resource
- 	fsl_chan->tcd_pool = dma_pool_create("tcd_pool", chan->device->dev,
- 				sizeof(struct fsl_edma3_hw_tcd),
- 				32, 0);
-+	pm_runtime_get_sync(fsl_chan->dev);
- 	/* clear meaningless pending irq anyway */
- 	writel(1, fsl_chan->membase + EDMA_CH_INT);
-+
- 	ret = devm_request_irq(&pdev->dev, fsl_chan->txirq,
- 			fsl_edma3_tx_handler, fsl_chan->edma3->irqflag,
- 			fsl_chan->txirq_name, fsl_chan);
-@@ -830,6 +835,7 @@ static void fsl_edma3_free_chan_resource
- 	dma_pool_destroy(fsl_chan->tcd_pool);
- 	fsl_chan->tcd_pool = NULL;
- 	fsl_chan->used = false;
-+	pm_runtime_put_sync(fsl_chan->dev);
- }
- 
- static void fsl_edma3_synchronize(struct dma_chan *chan)
-@@ -839,6 +845,37 @@ static void fsl_edma3_synchronize(struct
- 	vchan_synchronize(&fsl_chan->vchan);
- }
- 
-+static struct device *fsl_edma3_attach_pd(struct device *dev,
-+					  struct device_node *np, int index)
-+{
-+	const char *domn = "edma0-chan01";
-+	struct device *pd_chan;
-+	struct device_link *link;
-+	int ret;
-+
-+	ret = of_property_read_string_index(np, "power-domain-names", index,
-+						&domn);
-+	if (ret) {
-+		dev_err(dev, "parse power-domain-names error.(%d)\n", ret);
-+		return NULL;
-+	}
-+
-+	pd_chan = dev_pm_domain_attach_by_name(dev, domn);
-+	if (!pd_chan)
-+		return NULL;
-+
-+	link = device_link_add(dev, pd_chan, DL_FLAG_STATELESS |
-+					     DL_FLAG_PM_RUNTIME |
-+					     DL_FLAG_RPM_ACTIVE);
-+	if (IS_ERR(link)) {
-+		dev_err(dev, "Failed to add device_link to %s: %ld\n", domn,
-+			PTR_ERR(link));
-+		return NULL;
-+	}
-+
-+	return pd_chan;
-+}
-+
- static int fsl_edma3_probe(struct platform_device *pdev)
- {
- 	struct device_node *np = pdev->dev.of_node;
-@@ -962,6 +999,22 @@ static int fsl_edma3_probe(struct platfo
- 		dev_err(&pdev->dev, "Can't register Freescale eDMA engine.\n");
- 		return ret;
- 	}
-+	/* Attach power domains from dts for each dma chanel device */
-+	for (i = 0; i < fsl_edma3->n_chans; i++) {
-+		struct fsl_edma3_chan *fsl_chan = &fsl_edma3->chans[i];
-+		struct device *dev;
-+
-+		dev = fsl_edma3_attach_pd(&pdev->dev, np, i);
-+		if (!dev) {
-+			dev_err(dev, "edma channel attach failed.\n");
-+			return -EINVAL;
-+		}
-+
-+		fsl_chan->dev = dev;
-+		/* clear meaningless pending irq anyway */
-+		writel(1, fsl_chan->membase + EDMA_CH_INT);
-+		pm_runtime_put_sync(dev);
-+	}
- 
- 	ret = of_dma_controller_register(np, fsl_edma3_xlate, fsl_edma3);
- 	if (ret) {
-@@ -970,6 +1023,9 @@ static int fsl_edma3_probe(struct platfo
- 		return ret;
- 	}
- 
-+	pm_runtime_dont_use_autosuspend(&pdev->dev);
-+	pm_runtime_enable(&pdev->dev);
-+
- 	return 0;
- }
- 
-@@ -1068,7 +1124,7 @@ static int __init fsl_edma3_init(void)
- {
- 	return platform_driver_register(&fsl_edma3_driver);
- }
--subsys_initcall(fsl_edma3_init);
-+fs_initcall(fsl_edma3_init);
- 
- static void __exit fsl_edma3_exit(void)
- {
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0023-MLK-22284-2-dmaengine-fsl-edma-v3-check-dma-descript.patch b/target/linux/layerscape/patches-5.4/806-dma-0023-MLK-22284-2-dmaengine-fsl-edma-v3-check-dma-descript.patch
deleted file mode 100644
index c073dd5c6a..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0023-MLK-22284-2-dmaengine-fsl-edma-v3-check-dma-descript.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 89885c09160b04ae2eec82cf9b35117ff6aa4c5d Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Wed, 8 May 2019 00:13:40 +0800
-Subject: [PATCH] MLK-22284-2 dmaengine: fsl-edma-v3: check dma description
- before register touch
-
-Check dma desscription firstly to ignore any unexpected interrupt
-after channel terminate, otherwise, still have chance to touch channel
-register whose power has been already off.
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-Reviewed-by: S.j. Wang <shengjiu.wang@nxp.com>
-(cherry picked from commit fd073e017e317006a4c254ca5ae3ea17b6f32502)
----
- drivers/dma/fsl-edma-v3.c | 14 +++++++-------
- 1 file changed, 7 insertions(+), 7 deletions(-)
-
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -708,20 +708,20 @@ static irqreturn_t fsl_edma3_tx_handler(
- 	unsigned int intr;
- 	void __iomem *base_addr;
- 
-+	spin_lock(&fsl_chan->vchan.lock);
-+
-+	/* Ignore this interrupt since channel has been disabled already */
-+	if (!fsl_chan->edesc)
-+		goto irq_handled;
-+
- 	base_addr = fsl_chan->membase;
- 
- 	intr = readl(base_addr + EDMA_CH_INT);
- 	if (!intr)
--		return IRQ_NONE;
-+		goto irq_handled;
- 
- 	writel(1, base_addr + EDMA_CH_INT);
- 
--	spin_lock(&fsl_chan->vchan.lock);
--
--	/* Ignore this interrupt since channel has been disabled already */
--	if (!fsl_chan->edesc)
--		goto irq_handled;
--
- 	if (!fsl_chan->edesc->iscyclic) {
- 		fsl_edma3_get_realcnt(fsl_chan);
- 		list_del(&fsl_chan->edesc->vdesc.node);
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0024-MLK-22302-2-dmaengine-fsl-edma-v3-fix-build-warning-.patch b/target/linux/layerscape/patches-5.4/806-dma-0024-MLK-22302-2-dmaengine-fsl-edma-v3-fix-build-warning-.patch
deleted file mode 100644
index c6fc11c1c5..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0024-MLK-22302-2-dmaengine-fsl-edma-v3-fix-build-warning-.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 88ac887c165bffe8b03cc81a74d089abc4c02cd1 Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Tue, 23 Jul 2019 23:42:53 +0800
-Subject: [PATCH] MLK-22302-2: dmaengine: fsl-edma-v3: fix build warning with
- CONFIG_PM_SLEEP=n
-
-Fix build waring with CONFIG_PM_SLEEP=n.
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-Reviewed-by: Andy Duan <fugang.duan@nxp.com>
-(cherry picked from commit dfe2a755209615f9592ed937957b2efdc3b6d6c0)
----
- drivers/dma/fsl-edma-v3.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -1040,6 +1040,7 @@ static int fsl_edma3_remove(struct platf
- 	return 0;
- }
- 
-+#ifdef CONFIG_PM_SLEEP
- static int fsl_edma3_suspend_late(struct device *dev)
- {
- 	struct fsl_edma3_engine *fsl_edma = dev_get_drvdata(dev);
-@@ -1097,10 +1098,11 @@ static int fsl_edma3_resume_early(struct
- 
- 	return 0;
- }
-+#endif
- 
- static const struct dev_pm_ops fsl_edma3_pm_ops = {
--	.suspend_late   = fsl_edma3_suspend_late,
--	.resume_early   = fsl_edma3_resume_early,
-+	SET_LATE_SYSTEM_SLEEP_PM_OPS(fsl_edma3_suspend_late,
-+				     fsl_edma3_resume_early)
- };
- 
- static const struct of_device_id fsl_edma3_dt_ids[] = {
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0025-MLK-22909-dmaengine-fsl-edma-v3-clear-interrupt-comi.patch b/target/linux/layerscape/patches-5.4/806-dma-0025-MLK-22909-dmaengine-fsl-edma-v3-clear-interrupt-comi.patch
deleted file mode 100644
index 42f151f3f7..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0025-MLK-22909-dmaengine-fsl-edma-v3-clear-interrupt-comi.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 7021361c27946c60885b3f031ddde342f9a5432f Mon Sep 17 00:00:00 2001
-From: Robin Gong <yibin.gong@nxp.com>
-Date: Tue, 5 Nov 2019 21:32:22 +0800
-Subject: [PATCH] MLK-22909 dmaengine: fsl-edma-v3: clear interrupt coming
- after channel terminated
-
-Clear EDMA_CH_INT in case dma done interrupt comes after channel terminated
-instead of channel free-ed, otherwise, RCU maybe caught because it's
-ignored without interrupt status cleared as Android team report in Monkey
-test.
-
-Signed-off-by: Robin Gong <yibin.gong@nxp.com>
-Acked-by: Fugang Duan <fugang.duan@nxp.com>
-(cherry picked from commit ef91ff6ed465cebe2fe6483a480351abba36e237)
-(cherry picked from commit 56ee55c71c5f3ef254acb4dee581e68f79ef13a5)
----
- drivers/dma/fsl-edma-v3.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/dma/fsl-edma-v3.c
-+++ b/drivers/dma/fsl-edma-v3.c
-@@ -710,8 +710,8 @@ static irqreturn_t fsl_edma3_tx_handler(
- 
- 	spin_lock(&fsl_chan->vchan.lock);
- 
--	/* Ignore this interrupt since channel has been disabled already */
--	if (!fsl_chan->edesc)
-+	/* Ignore this interrupt since channel has been freeed with power off */
-+	if (!fsl_chan->edesc && !fsl_chan->tcd_pool)
- 		goto irq_handled;
- 
- 	base_addr = fsl_chan->membase;
-@@ -722,6 +722,10 @@ static irqreturn_t fsl_edma3_tx_handler(
- 
- 	writel(1, base_addr + EDMA_CH_INT);
- 
-+	/* Ignore this interrupt since channel has been disabled already */
-+	if (!fsl_chan->edesc)
-+		goto irq_handled;
-+
- 	if (!fsl_chan->edesc->iscyclic) {
- 		fsl_edma3_get_realcnt(fsl_chan);
- 		list_del(&fsl_chan->edesc->vdesc.node);
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0026-dma-caam-add-dma-memcpy-driver.patch b/target/linux/layerscape/patches-5.4/806-dma-0026-dma-caam-add-dma-memcpy-driver.patch
deleted file mode 100644
index be5ae1ad13..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0026-dma-caam-add-dma-memcpy-driver.patch
+++ /dev/null
@@ -1,538 +0,0 @@
-From 27aa9f97887f599267c345075e61979de785c770 Mon Sep 17 00:00:00 2001
-From: Peng Ma <peng.ma@nxp.com>
-Date: Thu, 11 Oct 2018 16:49:41 +0800
-Subject: [PATCH] dma: caam: add dma memcpy driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This module introduces a memcpy DMA driver based on the DMA capabilities
-of the CAAM hardware block. CAAM DMA is a platform driver that is only
-probed if the device is defined in the device tree. The driver creates
-a DMA channel for each JR of the CAAM. This introduces a dependency on
-the JR driver. Therefore a defering mechanism was used to ensure that
-the CAAM DMA driver is probed only after the JR driver.
-
-Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
-Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
-Signed-off-by: Rajiv Vishwakarma <rajiv.vishwakarma@nxp.com>
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/dma/Kconfig    |  19 +-
- drivers/dma/Makefile   |   1 +
- drivers/dma/caam_dma.c | 462 +++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 481 insertions(+), 1 deletion(-)
- create mode 100644 drivers/dma/caam_dma.c
-
---- a/drivers/dma/Kconfig
-+++ b/drivers/dma/Kconfig
-@@ -132,6 +132,24 @@ config COH901318
- 	help
- 	  Enable support for ST-Ericsson COH 901 318 DMA.
- 
-+config CRYPTO_DEV_FSL_CAAM_DMA
-+	tristate "CAAM DMA engine support"
-+	depends on CRYPTO_DEV_FSL_CAAM_JR
-+	default n
-+	select DMA_ENGINE
-+	select ASYNC_CORE
-+	select ASYNC_TX_ENABLE_CHANNEL_SWITCH
-+	help
-+	  Selecting this will offload the DMA operations for users of
-+	  the scatter gather memcopy API to the CAAM via job rings. The
-+	  CAAM is a hardware module that provides hardware acceleration to
-+	  cryptographic operations. It has a built-in DMA controller that can
-+	  be programmed to read/write cryptographic data. This module defines
-+	  a DMA driver that uses the DMA capabilities of the CAAM.
-+
-+	  To compile this as a module, choose M here: the module
-+	  will be called caam_dma.
-+
- config DMA_BCM2835
- 	tristate "BCM2835 DMA engine support"
- 	depends on ARCH_BCM2835
-@@ -663,7 +681,6 @@ config ZX_DMA
- 	help
- 	  Support the DMA engine for ZTE ZX family platform devices.
- 
--
- # driver files
- source "drivers/dma/bestcomm/Kconfig"
- 
---- a/drivers/dma/Makefile
-+++ b/drivers/dma/Makefile
-@@ -77,6 +77,7 @@ obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
- obj-$(CONFIG_ZX_DMA) += zx_dma.o
- obj-$(CONFIG_ST_FDMA) += st_fdma.o
- obj-$(CONFIG_FSL_DPAA2_QDMA) += fsl-dpaa2-qdma/
-+obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_DMA) += caam_dma.o
- 
- obj-y += mediatek/
- obj-y += qcom/
---- /dev/null
-+++ b/drivers/dma/caam_dma.c
-@@ -0,0 +1,462 @@
-+/*
-+ * caam support for SG DMA
-+ *
-+ * Copyright 2016 Freescale Semiconductor, Inc
-+ * Copyright 2017 NXP
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the names of the above-listed copyright holders nor the
-+ *       names of any contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
-+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-+ * POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/dma-mapping.h>
-+#include <linux/dmaengine.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+#include "dmaengine.h"
-+
-+#include "../crypto/caam/regs.h"
-+#include "../crypto/caam/jr.h"
-+#include "../crypto/caam/error.h"
-+#include "../crypto/caam/desc_constr.h"
-+
-+#define DESC_DMA_MEMCPY_LEN	((CAAM_DESC_BYTES_MAX - DESC_JOB_IO_LEN) / \
-+				 CAAM_CMD_SZ)
-+
-+/*
-+ * This is max chunk size of a DMA transfer. If a buffer is larger than this
-+ * value it is internally broken into chunks of max CAAM_DMA_CHUNK_SIZE bytes
-+ * and for each chunk a DMA transfer request is issued.
-+ * This value is the largest number on 16 bits that is a multiple of 256 bytes
-+ * (the largest configurable CAAM DMA burst size).
-+ */
-+#define CAAM_DMA_CHUNK_SIZE	65280
-+
-+struct caam_dma_sh_desc {
-+	u32 desc[DESC_DMA_MEMCPY_LEN] ____cacheline_aligned;
-+	dma_addr_t desc_dma;
-+};
-+
-+/* caam dma extended descriptor */
-+struct caam_dma_edesc {
-+	struct dma_async_tx_descriptor async_tx;
-+	struct list_head node;
-+	struct caam_dma_ctx *ctx;
-+	dma_addr_t src_dma;
-+	dma_addr_t dst_dma;
-+	unsigned int src_len;
-+	unsigned int dst_len;
-+	u32 jd[] ____cacheline_aligned;
-+};
-+
-+/*
-+ * caam_dma_ctx - per jr/channel context
-+ * @chan: dma channel used by async_tx API
-+ * @node: list_head used to attach to the global dma_ctx_list
-+ * @jrdev: Job Ring device
-+ * @pending_q: queue of pending (submitted, but not enqueued) jobs
-+ * @done_not_acked: jobs that have been completed by jr, but maybe not acked
-+ * @edesc_lock: protects extended descriptor
-+ */
-+struct caam_dma_ctx {
-+	struct dma_chan chan;
-+	struct list_head node;
-+	struct device *jrdev;
-+	struct list_head pending_q;
-+	struct list_head done_not_acked;
-+	spinlock_t edesc_lock;
-+};
-+
-+static struct dma_device *dma_dev;
-+static struct caam_dma_sh_desc *dma_sh_desc;
-+static LIST_HEAD(dma_ctx_list);
-+
-+static dma_cookie_t caam_dma_tx_submit(struct dma_async_tx_descriptor *tx)
-+{
-+	struct caam_dma_edesc *edesc = NULL;
-+	struct caam_dma_ctx *ctx = NULL;
-+	dma_cookie_t cookie;
-+
-+	edesc = container_of(tx, struct caam_dma_edesc, async_tx);
-+	ctx = container_of(tx->chan, struct caam_dma_ctx, chan);
-+
-+	spin_lock_bh(&ctx->edesc_lock);
-+
-+	cookie = dma_cookie_assign(tx);
-+	list_add_tail(&edesc->node, &ctx->pending_q);
-+
-+	spin_unlock_bh(&ctx->edesc_lock);
-+
-+	return cookie;
-+}
-+
-+static void caam_jr_chan_free_edesc(struct caam_dma_edesc *edesc)
-+{
-+	struct caam_dma_ctx *ctx = edesc->ctx;
-+	struct caam_dma_edesc *_edesc = NULL;
-+
-+	spin_lock_bh(&ctx->edesc_lock);
-+
-+	list_add_tail(&edesc->node, &ctx->done_not_acked);
-+	list_for_each_entry_safe(edesc, _edesc, &ctx->done_not_acked, node) {
-+		if (async_tx_test_ack(&edesc->async_tx)) {
-+			list_del(&edesc->node);
-+			kfree(edesc);
-+		}
-+	}
-+
-+	spin_unlock_bh(&ctx->edesc_lock);
-+}
-+
-+static void caam_dma_done(struct device *dev, u32 *hwdesc, u32 err,
-+			  void *context)
-+{
-+	struct caam_dma_edesc *edesc = context;
-+	struct caam_dma_ctx *ctx = edesc->ctx;
-+	dma_async_tx_callback callback;
-+	void *callback_param;
-+
-+	if (err)
-+		caam_jr_strstatus(ctx->jrdev, err);
-+
-+	dma_run_dependencies(&edesc->async_tx);
-+
-+	spin_lock_bh(&ctx->edesc_lock);
-+	dma_cookie_complete(&edesc->async_tx);
-+	spin_unlock_bh(&ctx->edesc_lock);
-+
-+	callback = edesc->async_tx.callback;
-+	callback_param = edesc->async_tx.callback_param;
-+
-+	dma_descriptor_unmap(&edesc->async_tx);
-+
-+	caam_jr_chan_free_edesc(edesc);
-+
-+	if (callback)
-+		callback(callback_param);
-+}
-+
-+static void caam_dma_memcpy_init_job_desc(struct caam_dma_edesc *edesc)
-+{
-+	u32 *jd = edesc->jd;
-+	u32 *sh_desc = dma_sh_desc->desc;
-+	dma_addr_t desc_dma = dma_sh_desc->desc_dma;
-+
-+	/* init the job descriptor */
-+	init_job_desc_shared(jd, desc_dma, desc_len(sh_desc), HDR_REVERSE);
-+
-+	/* set SEQIN PTR */
-+	append_seq_in_ptr(jd, edesc->src_dma, edesc->src_len, 0);
-+
-+	/* set SEQOUT PTR */
-+	append_seq_out_ptr(jd, edesc->dst_dma, edesc->dst_len, 0);
-+
-+	print_hex_dump_debug("caam dma desc@" __stringify(__LINE__) ": ",
-+			     DUMP_PREFIX_ADDRESS, 16, 4, jd, desc_bytes(jd), 1);
-+}
-+
-+static struct dma_async_tx_descriptor *
-+caam_dma_prep_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
-+		     size_t len, unsigned long flags)
-+{
-+	struct caam_dma_edesc *edesc;
-+	struct caam_dma_ctx *ctx = container_of(chan, struct caam_dma_ctx,
-+						chan);
-+
-+	edesc = kzalloc(sizeof(*edesc) + DESC_JOB_IO_LEN, GFP_DMA | GFP_NOWAIT);
-+	if (!edesc)
-+		return ERR_PTR(-ENOMEM);
-+
-+	dma_async_tx_descriptor_init(&edesc->async_tx, chan);
-+	edesc->async_tx.tx_submit = caam_dma_tx_submit;
-+	edesc->async_tx.flags = flags;
-+	edesc->async_tx.cookie = -EBUSY;
-+
-+	edesc->src_dma = src;
-+	edesc->src_len = len;
-+	edesc->dst_dma = dst;
-+	edesc->dst_len = len;
-+	edesc->ctx = ctx;
-+
-+	caam_dma_memcpy_init_job_desc(edesc);
-+
-+	return &edesc->async_tx;
-+}
-+
-+/* This function can be called in an interrupt context */
-+static void caam_dma_issue_pending(struct dma_chan *chan)
-+{
-+	struct caam_dma_ctx *ctx = container_of(chan, struct caam_dma_ctx,
-+						chan);
-+	struct caam_dma_edesc *edesc, *_edesc;
-+
-+	spin_lock_bh(&ctx->edesc_lock);
-+	list_for_each_entry_safe(edesc, _edesc, &ctx->pending_q, node) {
-+		if (caam_jr_enqueue(ctx->jrdev, edesc->jd,
-+				    caam_dma_done, edesc) < 0)
-+			break;
-+		list_del(&edesc->node);
-+	}
-+	spin_unlock_bh(&ctx->edesc_lock);
-+}
-+
-+static void caam_dma_free_chan_resources(struct dma_chan *chan)
-+{
-+	struct caam_dma_ctx *ctx = container_of(chan, struct caam_dma_ctx,
-+						chan);
-+	struct caam_dma_edesc *edesc, *_edesc;
-+
-+	spin_lock_bh(&ctx->edesc_lock);
-+	list_for_each_entry_safe(edesc, _edesc, &ctx->pending_q, node) {
-+		list_del(&edesc->node);
-+		kfree(edesc);
-+	}
-+	list_for_each_entry_safe(edesc, _edesc, &ctx->done_not_acked, node) {
-+		list_del(&edesc->node);
-+		kfree(edesc);
-+	}
-+	spin_unlock_bh(&ctx->edesc_lock);
-+}
-+
-+static int caam_dma_jr_chan_bind(void)
-+{
-+	struct device *jrdev;
-+	struct caam_dma_ctx *ctx;
-+	int bonds = 0;
-+	int i;
-+
-+	for (i = 0; i < caam_jr_driver_probed(); i++) {
-+		jrdev = caam_jridx_alloc(i);
-+		if (IS_ERR(jrdev)) {
-+			pr_err("job ring device %d allocation failed\n", i);
-+			continue;
-+		}
-+
-+		ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
-+		if (!ctx) {
-+			caam_jr_free(jrdev);
-+			continue;
-+		}
-+
-+		ctx->chan.device = dma_dev;
-+		ctx->chan.private = ctx;
-+
-+		ctx->jrdev = jrdev;
-+
-+		INIT_LIST_HEAD(&ctx->pending_q);
-+		INIT_LIST_HEAD(&ctx->done_not_acked);
-+		INIT_LIST_HEAD(&ctx->node);
-+		spin_lock_init(&ctx->edesc_lock);
-+
-+		dma_cookie_init(&ctx->chan);
-+
-+		/* add the context of this channel to the context list */
-+		list_add_tail(&ctx->node, &dma_ctx_list);
-+
-+		/* add this channel to the device chan list */
-+		list_add_tail(&ctx->chan.device_node, &dma_dev->channels);
-+
-+		bonds++;
-+	}
-+
-+	return bonds;
-+}
-+
-+static inline void caam_jr_dma_free(struct dma_chan *chan)
-+{
-+	struct caam_dma_ctx *ctx = container_of(chan, struct caam_dma_ctx,
-+						chan);
-+
-+	list_del(&ctx->node);
-+	list_del(&chan->device_node);
-+	caam_jr_free(ctx->jrdev);
-+	kfree(ctx);
-+}
-+
-+static void set_caam_dma_desc(u32 *desc)
-+{
-+	u32 *jmp_cmd;
-+
-+	/* dma shared descriptor */
-+	init_sh_desc(desc, HDR_SHARE_NEVER | (1 << HDR_START_IDX_SHIFT));
-+
-+	/* REG1 = CAAM_DMA_CHUNK_SIZE */
-+	append_math_add_imm_u32(desc, REG1, ZERO, IMM, CAAM_DMA_CHUNK_SIZE);
-+
-+	/* REG0 = SEQINLEN - CAAM_DMA_CHUNK_SIZE */
-+	append_math_sub_imm_u32(desc, REG0, SEQINLEN, IMM, CAAM_DMA_CHUNK_SIZE);
-+
-+	/*
-+	 * if (REG0 > 0)
-+	 *	jmp to LABEL1
-+	 */
-+	jmp_cmd = append_jump(desc, JUMP_TEST_INVALL | JUMP_COND_MATH_N |
-+			      JUMP_COND_MATH_Z);
-+
-+	/* REG1 = SEQINLEN */
-+	append_math_sub(desc, REG1, SEQINLEN, ZERO, CAAM_CMD_SZ);
-+
-+	/* LABEL1 */
-+	set_jump_tgt_here(desc, jmp_cmd);
-+
-+	/* VARSEQINLEN = REG1 */
-+	append_math_add(desc, VARSEQINLEN, REG1, ZERO, CAAM_CMD_SZ);
-+
-+	/* VARSEQOUTLEN = REG1 */
-+	append_math_add(desc, VARSEQOUTLEN, REG1, ZERO, CAAM_CMD_SZ);
-+
-+	/* do FIFO STORE */
-+	append_seq_fifo_store(desc, 0, FIFOST_TYPE_METADATA | LDST_VLF);
-+
-+	/* do FIFO LOAD */
-+	append_seq_fifo_load(desc, 0, FIFOLD_CLASS_CLASS1 |
-+			     FIFOLD_TYPE_IFIFO | LDST_VLF);
-+
-+	/*
-+	 * if (REG0 > 0)
-+	 *	jmp 0xF8 (after shared desc header)
-+	 */
-+	append_jump(desc, JUMP_TEST_INVALL | JUMP_COND_MATH_N |
-+		    JUMP_COND_MATH_Z | 0xF8);
-+
-+	print_hex_dump_debug("caam dma shdesc@" __stringify(__LINE__) ": ",
-+			     DUMP_PREFIX_ADDRESS, 16, 4, desc, desc_bytes(desc),
-+			     1);
-+}
-+
-+static int caam_dma_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct device *ctrldev = dev->parent;
-+	struct dma_chan *chan, *_chan;
-+	u32 *sh_desc;
-+	int err = -ENOMEM;
-+	int bonds;
-+
-+	if (!caam_jr_driver_probed()) {
-+		dev_info(dev, "Defer probing after JR driver probing\n");
-+		return -EPROBE_DEFER;
-+	}
-+
-+	dma_dev = kzalloc(sizeof(*dma_dev), GFP_KERNEL);
-+	if (!dma_dev)
-+		return -ENOMEM;
-+
-+	dma_sh_desc = kzalloc(sizeof(*dma_sh_desc), GFP_KERNEL | GFP_DMA);
-+	if (!dma_sh_desc)
-+		goto desc_err;
-+
-+	sh_desc = dma_sh_desc->desc;
-+	set_caam_dma_desc(sh_desc);
-+	dma_sh_desc->desc_dma = dma_map_single(ctrldev, sh_desc,
-+					       desc_bytes(sh_desc),
-+					       DMA_TO_DEVICE);
-+	if (dma_mapping_error(ctrldev, dma_sh_desc->desc_dma)) {
-+		dev_err(dev, "unable to map dma descriptor\n");
-+		goto map_err;
-+	}
-+
-+	INIT_LIST_HEAD(&dma_dev->channels);
-+
-+	bonds = caam_dma_jr_chan_bind();
-+	if (!bonds) {
-+		err = -ENODEV;
-+		goto jr_bind_err;
-+	}
-+
-+	dma_dev->dev = dev;
-+	dma_dev->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
-+	dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask);
-+	dma_cap_set(DMA_PRIVATE, dma_dev->cap_mask);
-+	dma_dev->device_tx_status = dma_cookie_status;
-+	dma_dev->device_issue_pending = caam_dma_issue_pending;
-+	dma_dev->device_prep_dma_memcpy = caam_dma_prep_memcpy;
-+	dma_dev->device_free_chan_resources = caam_dma_free_chan_resources;
-+
-+	err = dma_async_device_register(dma_dev);
-+	if (err) {
-+		dev_err(dev, "Failed to register CAAM DMA engine\n");
-+		goto jr_bind_err;
-+	}
-+
-+	dev_info(dev, "caam dma support with %d job rings\n", bonds);
-+
-+	return err;
-+
-+jr_bind_err:
-+	list_for_each_entry_safe(chan, _chan, &dma_dev->channels, device_node)
-+		caam_jr_dma_free(chan);
-+
-+	dma_unmap_single(ctrldev, dma_sh_desc->desc_dma, desc_bytes(sh_desc),
-+			 DMA_TO_DEVICE);
-+map_err:
-+	kfree(dma_sh_desc);
-+desc_err:
-+	kfree(dma_dev);
-+	return err;
-+}
-+
-+static int caam_dma_remove(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct device *ctrldev = dev->parent;
-+	struct caam_dma_ctx *ctx, *_ctx;
-+
-+	dma_async_device_unregister(dma_dev);
-+
-+	list_for_each_entry_safe(ctx, _ctx, &dma_ctx_list, node) {
-+		list_del(&ctx->node);
-+		caam_jr_free(ctx->jrdev);
-+		kfree(ctx);
-+	}
-+
-+	dma_unmap_single(ctrldev, dma_sh_desc->desc_dma,
-+			 desc_bytes(dma_sh_desc->desc), DMA_TO_DEVICE);
-+
-+	kfree(dma_sh_desc);
-+	kfree(dma_dev);
-+
-+	dev_info(dev, "caam dma support disabled\n");
-+	return 0;
-+}
-+
-+static struct platform_driver caam_dma_driver = {
-+	.driver = {
-+		.name = "caam-dma",
-+	},
-+	.probe  = caam_dma_probe,
-+	.remove = caam_dma_remove,
-+};
-+module_platform_driver(caam_dma_driver);
-+
-+MODULE_LICENSE("Dual BSD/GPL");
-+MODULE_DESCRIPTION("NXP CAAM support for DMA engine");
-+MODULE_AUTHOR("NXP Semiconductors");
-+MODULE_ALIAS("platform:caam-dma");
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0027-dma-caam-fix-compilation-error.patch b/target/linux/layerscape/patches-5.4/806-dma-0027-dma-caam-fix-compilation-error.patch
deleted file mode 100644
index 368185f5ee..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0027-dma-caam-fix-compilation-error.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From ced02a1fdc5d9d394bffe4427021de238a0ad697 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Horia=20Geant=C4=83?= <horia.geanta@nxp.com>
-Date: Fri, 4 Oct 2019 14:07:03 +0300
-Subject: [PATCH] dma: caam: fix compilation error
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Fix compilation error, introduced by incorrect rebase of the
-commit 9c51c141264c ("dma: caam: add dma memcpy driver"
-on top of upstream
-commit 1bcdf5a00f41 ("crypto: caam - make CAAM_PTR_SZ dynamic")
-
-Fixes: 9c51c141264c ("dma: caam: add dma memcpy driver")
-Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
----
- drivers/dma/caam_dma.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/dma/caam_dma.c
-+++ b/drivers/dma/caam_dma.c
-@@ -47,7 +47,7 @@
- #include "../crypto/caam/error.h"
- #include "../crypto/caam/desc_constr.h"
- 
--#define DESC_DMA_MEMCPY_LEN	((CAAM_DESC_BYTES_MAX - DESC_JOB_IO_LEN) / \
-+#define DESC_DMA_MEMCPY_LEN	((CAAM_DESC_BYTES_MAX - DESC_JOB_IO_LEN_MIN) / \
- 				 CAAM_CMD_SZ)
- 
- /*
diff --git a/target/linux/layerscape/patches-5.4/806-dma-0028-dmaengine-fsl-edma-Add-eDMA-support-for-QorIQ-LS1028.patch b/target/linux/layerscape/patches-5.4/806-dma-0028-dmaengine-fsl-edma-Add-eDMA-support-for-QorIQ-LS1028.patch
deleted file mode 100644
index 4707eccdab..0000000000
--- a/target/linux/layerscape/patches-5.4/806-dma-0028-dmaengine-fsl-edma-Add-eDMA-support-for-QorIQ-LS1028.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 83d2cb1c64c5a34f23b34fcee715a68be230c232 Mon Sep 17 00:00:00 2001
-From: Peng Ma <peng.ma@nxp.com>
-Date: Thu, 12 Dec 2019 03:38:10 +0000
-Subject: [PATCH] dmaengine: fsl-edma: Add eDMA support for QorIQ LS1028A
- platform
-
-Our platforms(such as LS1021A, LS1012A, LS1043A, LS1046A, LS1028A) with
-below registers(CHCFG0 - CHCFG15) of eDMA as follows:
-*-----------------------------------------------------------*
-|     Offset   |	OTHERS			|		LS1028A			|
-|--------------|--------------------|-----------------------|
-|     0x0      |        CHCFG0      |           CHCFG3      |
-|--------------|--------------------|-----------------------|
-|     0x1      |        CHCFG1      |           CHCFG2      |
-|--------------|--------------------|-----------------------|
-|     0x2      |        CHCFG2      |           CHCFG1      |
-|--------------|--------------------|-----------------------|
-|     0x3      |        CHCFG3      |           CHCFG0      |
-|--------------|--------------------|-----------------------|
-|     ...      |        ......      |           ......      |
-|--------------|--------------------|-----------------------|
-|     0xC      |        CHCFG12     |           CHCFG15     |
-|--------------|--------------------|-----------------------|
-|     0xD      |        CHCFG13     |           CHCFG14     |
-|--------------|--------------------|-----------------------|
-|     0xE      |        CHCFG14     |           CHCFG13     |
-|--------------|--------------------|-----------------------|
-|     0xF      |        CHCFG15     |           CHCFG12     |
-*-----------------------------------------------------------*
-
-This patch is to improve edma driver to fit LS1028A platform.
-
-Signed-off-by: Peng Ma <peng.ma@nxp.com>
-Reviewed-by: Robin Gong <yibin.gong@nxp.com>
-Link: https://lore.kernel.org/r/20191212033714.4090-1-peng.ma@nxp.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/dma/fsl-edma-common.c | 5 +++++
- drivers/dma/fsl-edma-common.h | 1 +
- drivers/dma/fsl-edma.c        | 8 ++++++++
- 3 files changed, 14 insertions(+)
-
---- a/drivers/dma/fsl-edma-common.c
-+++ b/drivers/dma/fsl-edma-common.c
-@@ -109,10 +109,15 @@ void fsl_edma_chan_mux(struct fsl_edma_c
- 	u32 ch = fsl_chan->vchan.chan.chan_id;
- 	void __iomem *muxaddr;
- 	unsigned int chans_per_mux, ch_off;
-+	int endian_diff[4] = {3, 1, -1, -3};
- 	u32 dmamux_nr = fsl_chan->edma->drvdata->dmamuxs;
- 
- 	chans_per_mux = fsl_chan->edma->n_chans / dmamux_nr;
- 	ch_off = fsl_chan->vchan.chan.chan_id % chans_per_mux;
-+
-+	if (fsl_chan->edma->drvdata->mux_swap)
-+		ch_off += endian_diff[ch_off % 4];
-+
- 	muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux];
- 	slot = EDMAMUX_CHCFG_SOURCE(slot);
- 
---- a/drivers/dma/fsl-edma-common.h
-+++ b/drivers/dma/fsl-edma-common.h
-@@ -148,6 +148,7 @@ struct fsl_edma_drvdata {
- 	enum edma_version	version;
- 	u32			dmamuxs;
- 	bool			has_dmaclk;
-+	bool			mux_swap;
- 	int			(*setup_irq)(struct platform_device *pdev,
- 					     struct fsl_edma_engine *fsl_edma);
- };
---- a/drivers/dma/fsl-edma.c
-+++ b/drivers/dma/fsl-edma.c
-@@ -241,6 +241,13 @@ static struct fsl_edma_drvdata vf610_dat
- 	.setup_irq = fsl_edma_irq_init,
- };
- 
-+static struct fsl_edma_drvdata ls1028a_data = {
-+	.version = v1,
-+	.dmamuxs = DMAMUX_NR,
-+	.mux_swap = true,
-+	.setup_irq = fsl_edma_irq_init,
-+};
-+
- static struct fsl_edma_drvdata imx7ulp_data = {
- 	.version = v3,
- 	.dmamuxs = 1,
-@@ -250,6 +257,7 @@ static struct fsl_edma_drvdata imx7ulp_d
- 
- static const struct of_device_id fsl_edma_dt_ids[] = {
- 	{ .compatible = "fsl,vf610-edma", .data = &vf610_data},
-+	{ .compatible = "fsl,ls1028a-edma", .data = &ls1028a_data},
- 	{ .compatible = "fsl,imx7ulp-edma", .data = &imx7ulp_data},
- 	{ /* sentinel */ }
- };
diff --git a/target/linux/layerscape/patches-5.4/807-gpio-0001-gpio-mpc8xxx-change-irq-handler-from-chained-to-norm.patch b/target/linux/layerscape/patches-5.4/807-gpio-0001-gpio-mpc8xxx-change-irq-handler-from-chained-to-norm.patch
deleted file mode 100644
index 01d2772138..0000000000
--- a/target/linux/layerscape/patches-5.4/807-gpio-0001-gpio-mpc8xxx-change-irq-handler-from-chained-to-norm.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 8070fa91b95e20cd270c8d76bf45f2a5423358bf Mon Sep 17 00:00:00 2001
-From: Song Hui <hui.song_1@nxp.com>
-Date: Fri, 6 Sep 2019 19:42:59 +0800
-Subject: [PATCH] gpio/mpc8xxx: change irq handler from chained to normal
-
-More than one gpio controllers can share one interrupt, change the
-driver to request shared irq.
-
-While this will work, it will mess up userspace accounting of the number
-of interrupts per second in tools such as vmstat.  The reason is that
-for every GPIO interrupt, /proc/interrupts records the count against GIC
-interrupt 68 or 69, as well as the GPIO itself.  So, for every GPIO
-interrupt, the total number of interrupts that the system has seen
-increments by two.
-
-Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@nxp.com>
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
-Signed-off-by: Song Hui <hui.song_1@nxp.com>
----
- drivers/gpio/gpio-mpc8xxx.c | 30 +++++++++++++++++++-----------
- 1 file changed, 19 insertions(+), 11 deletions(-)
-
---- a/drivers/gpio/gpio-mpc8xxx.c
-+++ b/drivers/gpio/gpio-mpc8xxx.c
-@@ -22,6 +22,7 @@
- #include <linux/irq.h>
- #include <linux/gpio/driver.h>
- #include <linux/bitops.h>
-+#include <linux/interrupt.h>
- 
- #define MPC8XXX_GPIO_PINS	32
- 
-@@ -127,20 +128,19 @@ static int mpc8xxx_gpio_to_irq(struct gp
- 		return -ENXIO;
- }
- 
--static void mpc8xxx_gpio_irq_cascade(struct irq_desc *desc)
-+static irqreturn_t mpc8xxx_gpio_irq_cascade(int irq, void *data)
- {
--	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_desc_get_handler_data(desc);
--	struct irq_chip *chip = irq_desc_get_chip(desc);
-+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = data;
- 	struct gpio_chip *gc = &mpc8xxx_gc->gc;
--	unsigned int mask;
-+	unsigned long mask;
-+	int i;
- 
- 	mask = gc->read_reg(mpc8xxx_gc->regs + GPIO_IER)
- 		& gc->read_reg(mpc8xxx_gc->regs + GPIO_IMR);
--	if (mask)
--		generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
--						     32 - ffs(mask)));
--	if (chip->irq_eoi)
--		chip->irq_eoi(&desc->irq_data);
-+	for_each_set_bit(i, &mask, 32)
-+		generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq, 31 - i));
-+
-+	return IRQ_HANDLED;
- }
- 
- static void mpc8xxx_irq_unmask(struct irq_data *d)
-@@ -414,8 +414,16 @@ static int mpc8xxx_probe(struct platform
- 	if (devtype->gpio_dir_in_init)
- 		devtype->gpio_dir_in_init(gc);
- 
--	irq_set_chained_handler_and_data(mpc8xxx_gc->irqn,
--					 mpc8xxx_gpio_irq_cascade, mpc8xxx_gc);
-+	ret = devm_request_irq(&pdev->dev, mpc8xxx_gc->irqn,
-+			       mpc8xxx_gpio_irq_cascade,
-+			       IRQF_NO_THREAD | IRQF_SHARED, "gpio-cascade",
-+			       mpc8xxx_gc);
-+	if (ret) {
-+		dev_err(&pdev->dev, "%s: failed to devm_request_irq(%d), ret = %d\n",
-+			np->full_name, mpc8xxx_gc->irqn, ret);
-+		goto err;
-+	}
-+
- 	return 0;
- err:
- 	iounmap(mpc8xxx_gc->regs);
diff --git a/target/linux/layerscape/patches-5.4/807-gpio-0002-gpio-mpc8xxx-ls1088a-ls1028a-edge-detection-mode-bug.patch b/target/linux/layerscape/patches-5.4/807-gpio-0002-gpio-mpc8xxx-ls1088a-ls1028a-edge-detection-mode-bug.patch
deleted file mode 100644
index 2809a8373e..0000000000
--- a/target/linux/layerscape/patches-5.4/807-gpio-0002-gpio-mpc8xxx-ls1088a-ls1028a-edge-detection-mode-bug.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From e59637a5f655b54bdca5b5a190e69758a593f1c2 Mon Sep 17 00:00:00 2001
-From: Song Hui <hui.song_1@nxp.com>
-Date: Mon, 18 Nov 2019 13:17:54 +0800
-Subject: [PATCH] gpio : mpc8xxx : ls1088a/ls1028a edge detection mode bug
- fixs.
-
-On these boards, the irq_set_type must point one valid function pointer
-that can correctly set both edge and falling edge.
-
-Signed-off-by: Song Hui <hui.song_1@nxp.com>
----
- drivers/gpio/gpio-mpc8xxx.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/gpio/gpio-mpc8xxx.c
-+++ b/drivers/gpio/gpio-mpc8xxx.c
-@@ -296,6 +296,7 @@ static const struct mpc8xxx_gpio_devtype
- 
- static const struct mpc8xxx_gpio_devtype ls1028a_gpio_devtype = {
- 	.gpio_dir_in_init = ls1028a_gpio_dir_in_init,
-+	.irq_set_type = mpc8xxx_irq_set_type,
- };
- 
- static const struct mpc8xxx_gpio_devtype mpc5125_gpio_devtype = {
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0001-MLK-16095-01-i2c-mux-pca954x-add-i2c-bus-switch-PCA9.patch b/target/linux/layerscape/patches-5.4/808-i2c-0001-MLK-16095-01-i2c-mux-pca954x-add-i2c-bus-switch-PCA9.patch
deleted file mode 100644
index 26a02ceb3b..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0001-MLK-16095-01-i2c-mux-pca954x-add-i2c-bus-switch-PCA9.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 80720c83833c6009b68958fff4e1cca712808395 Mon Sep 17 00:00:00 2001
-From: Richard Zhu <hongxing.zhu@nxp.com>
-Date: Thu, 24 Jan 2019 15:07:32 +0800
-Subject: [PATCH] MLK-16095-01 i2c: mux: pca954x: add i2c bus switch PCA9646
- chip support
-
-Add i2c bus switch PCA9646 chip support, which 2-wire bus switch
-and buffered 4-channel.
-
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
----
- drivers/i2c/muxes/i2c-mux-pca954x.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/i2c/muxes/i2c-mux-pca954x.c
-+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
-@@ -64,6 +64,7 @@ enum pca_type {
- 	pca_9546,
- 	pca_9547,
- 	pca_9548,
-+	pca_9646,
- 	pca_9846,
- 	pca_9847,
- 	pca_9848,
-@@ -145,6 +146,11 @@ static const struct chip_desc chips[] =
- 		.muxtype = pca954x_isswi,
- 		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
- 	},
-+	[pca_9646] = {
-+		.nchans = 4,
-+		.muxtype = pca954x_isswi,
-+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
-+	},
- 	[pca_9846] = {
- 		.nchans = 4,
- 		.muxtype = pca954x_isswi,
-@@ -190,6 +196,7 @@ static const struct i2c_device_id pca954
- 	{ "pca9546", pca_9546 },
- 	{ "pca9547", pca_9547 },
- 	{ "pca9548", pca_9548 },
-+	{ "pca9646", pca_9646 },
- 	{ "pca9846", pca_9846 },
- 	{ "pca9847", pca_9847 },
- 	{ "pca9848", pca_9848 },
-@@ -208,6 +215,7 @@ static const struct of_device_id pca954x
- 	{ .compatible = "nxp,pca9546", .data = &chips[pca_9546] },
- 	{ .compatible = "nxp,pca9547", .data = &chips[pca_9547] },
- 	{ .compatible = "nxp,pca9548", .data = &chips[pca_9548] },
-+	{ .compatible = "nxp,pca9646", .data = &chips[pca_9646] },
- 	{ .compatible = "nxp,pca9846", .data = &chips[pca_9846] },
- 	{ .compatible = "nxp,pca9847", .data = &chips[pca_9847] },
- 	{ .compatible = "nxp,pca9848", .data = &chips[pca_9848] },
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0002-MLK-10893-i2c-imx-add-irqf_no_suspend.patch b/target/linux/layerscape/patches-5.4/808-i2c-0002-MLK-10893-i2c-imx-add-irqf_no_suspend.patch
deleted file mode 100644
index c583177ebf..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0002-MLK-10893-i2c-imx-add-irqf_no_suspend.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 0d7b6f59e736f6f7389e5346a518f2dc009bbf89 Mon Sep 17 00:00:00 2001
-From: gaopan <b54642@freescale.com>
-Date: Tue, 12 May 2015 18:25:29 +0800
-Subject: [PATCH] MLK-10893: i2c: imx: add irqf_no_suspend
-
-The i2c irq is masked when pcie starts a i2c transfer process
-during noirq suspend stage. As a result, i2c transfer fails.
-To solve the problem, IRQF_NO_SUSPEND is added to i2c bus.
-
-Signed-off-by: Gao Pan <b54642@freescale.com>
-Signed-off-by: Fugang Duan <B38611@freescale.com>
-Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
-(cherry picked from commit d21259d913effcad322e30d389323e72a0f9709d)
----
- drivers/i2c/busses/i2c-imx.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/i2c/busses/i2c-imx.c
-+++ b/drivers/i2c/busses/i2c-imx.c
-@@ -1159,7 +1159,8 @@ static int i2c_imx_probe(struct platform
- 		goto rpm_disable;
- 
- 	/* Request IRQ */
--	ret = request_threaded_irq(irq, i2c_imx_isr, NULL, IRQF_SHARED,
-+	ret = request_threaded_irq(irq, i2c_imx_isr, NULL,
-+				   IRQF_SHARED | IRQF_NO_SUSPEND,
- 				   pdev->name, i2c_imx);
- 	if (ret) {
- 		dev_err(&pdev->dev, "can't claim irq %d\n", irq);
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0003-MLK-11403-I2C-imx-restore-pin-setting-for-i2c.patch b/target/linux/layerscape/patches-5.4/808-i2c-0003-MLK-11403-I2C-imx-restore-pin-setting-for-i2c.patch
deleted file mode 100644
index a03d73a890..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0003-MLK-11403-I2C-imx-restore-pin-setting-for-i2c.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From b862ceba838786ac81aa6a295ad91a54aff6909d Mon Sep 17 00:00:00 2001
-From: Gao Pan <b54642@freescale.com>
-Date: Tue, 25 Aug 2015 14:00:32 +0800
-Subject: [PATCH] MLK-11403: I2C: imx: restore pin setting for i2c
-
-restore pin setting for i2c in suspend/resume
-
-Signed-off-by: Gao Pan <gaopan@freescale.com>
-(Vipul: Fixed merge conflicts)
-Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
-(cherry picked from commit 42b5aa1d72c09015d435459c6a59022255e3ef21)
----
- drivers/i2c/busses/i2c-imx.c | 19 +++++++++++++++++--
- 1 file changed, 17 insertions(+), 2 deletions(-)
-
---- a/drivers/i2c/busses/i2c-imx.c
-+++ b/drivers/i2c/busses/i2c-imx.c
-@@ -1257,7 +1257,8 @@ static int __maybe_unused i2c_imx_runtim
- {
- 	struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
- 
--	clk_disable(i2c_imx->clk);
-+	clk_disable_unprepare(i2c_imx->clk);
-+	pinctrl_pm_select_sleep_state(dev);
- 
- 	return 0;
- }
-@@ -1267,14 +1268,28 @@ static int __maybe_unused i2c_imx_runtim
- 	struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
- 	int ret;
- 
--	ret = clk_enable(i2c_imx->clk);
-+	pinctrl_pm_select_default_state(dev);
-+	ret = clk_prepare_enable(i2c_imx->clk);
- 	if (ret)
- 		dev_err(dev, "can't enable I2C clock, ret=%d\n", ret);
- 
- 	return ret;
- }
- 
-+static int i2c_imx_suspend(struct device *dev)
-+{
-+	pinctrl_pm_select_sleep_state(dev);
-+	return 0;
-+}
-+
-+static int i2c_imx_resume(struct device *dev)
-+{
-+	pinctrl_pm_select_default_state(dev);
-+	return 0;
-+}
-+
- static const struct dev_pm_ops i2c_imx_pm_ops = {
-+	SET_SYSTEM_SLEEP_PM_OPS(i2c_imx_suspend, i2c_imx_resume)
- 	SET_RUNTIME_PM_OPS(i2c_imx_runtime_suspend,
- 			   i2c_imx_runtime_resume, NULL)
- };
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0004-MLK-16203-enable-runtime-pm-of-i2c-temporary-when-do.patch b/target/linux/layerscape/patches-5.4/808-i2c-0004-MLK-16203-enable-runtime-pm-of-i2c-temporary-when-do.patch
deleted file mode 100644
index 60c49bf99a..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0004-MLK-16203-enable-runtime-pm-of-i2c-temporary-when-do.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 4a76bb8458cbe93309314c58f276087569b2fc48 Mon Sep 17 00:00:00 2001
-From: Gao Pan <pandy.gao@nxp.com>
-Date: Fri, 18 Aug 2017 18:35:11 +0800
-Subject: [PATCH] MLK-16203 enable runtime pm of i2c temporary when do system
- suspend
-
-When we do system suspend, the runtime pm will be disabled, but we need
-to control the PMIC to power on/off the regulator, if the runtime pm is
-disabled, if will failed to request runtime wakeup. So data transfer will
-failed.
-
-Signed-off-by: Bai Ping <ping.bai@nxp.com>
-Signed-off-by: Gao Pan <pandy.gao@nxp.com>
-Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
-(cherry picked from commit 93adab71408f1f162015e77715dd04ce2301d673)
----
- drivers/i2c/busses/i2c-imx.c | 12 +++++++++++-
- 1 file changed, 11 insertions(+), 1 deletion(-)
-
---- a/drivers/i2c/busses/i2c-imx.c
-+++ b/drivers/i2c/busses/i2c-imx.c
-@@ -924,10 +924,17 @@ static int i2c_imx_xfer(struct i2c_adapt
- 	unsigned int i, temp;
- 	int result;
- 	bool is_lastmsg = false;
-+	bool enable_runtime_pm = false;
- 	struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter);
- 
- 	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
- 
-+
-+	if (!pm_runtime_enabled(i2c_imx->adapter.dev.parent)) {
-+		pm_runtime_enable(i2c_imx->adapter.dev.parent);
-+		enable_runtime_pm = true;
-+	}
-+
- 	result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
- 	if (result < 0)
- 		goto out;
-@@ -999,6 +1006,9 @@ fail0:
- 	pm_runtime_put_autosuspend(i2c_imx->adapter.dev.parent);
- 
- out:
-+	if (enable_runtime_pm)
-+		pm_runtime_disable(i2c_imx->adapter.dev.parent);
-+
- 	dev_dbg(&i2c_imx->adapter.dev, "<%s> exit with: %s: %d\n", __func__,
- 		(result < 0) ? "error" : "success msg",
- 			(result < 0) ? result : num);
-@@ -1289,7 +1299,7 @@ static int i2c_imx_resume(struct device
- }
- 
- static const struct dev_pm_ops i2c_imx_pm_ops = {
--	SET_SYSTEM_SLEEP_PM_OPS(i2c_imx_suspend, i2c_imx_resume)
-+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(i2c_imx_suspend, i2c_imx_resume)
- 	SET_RUNTIME_PM_OPS(i2c_imx_runtime_suspend,
- 			   i2c_imx_runtime_resume, NULL)
- };
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0005-MLK-20773-i2c-imx-add-a-limit-of-maximum-transfer-sp.patch b/target/linux/layerscape/patches-5.4/808-i2c-0005-MLK-20773-i2c-imx-add-a-limit-of-maximum-transfer-sp.patch
deleted file mode 100644
index 5f62b3f153..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0005-MLK-20773-i2c-imx-add-a-limit-of-maximum-transfer-sp.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From ede2da5ea630fa2431145992c43aef51fc9c5c5a Mon Sep 17 00:00:00 2001
-From: Clark Wang <xiaoning.wang@nxp.com>
-Date: Fri, 18 Jan 2019 12:00:16 +0800
-Subject: [PATCH] MLK-20773 i2c-imx: add a limit of maximum transfer speed for
- imx7d
-
-According the e7805 in Errata, the SCK low level period should be less
-than 1.3us.
-
-The other series platform use this same IP can match the errata, and
-ensure the low level period longer than 1.3us when the speed set to
-400KHz. However, only at imx7d platform, the low level period is less
-than 1.3us in the same situation.
-
-Therefore, limit the maximum transfer speed to 384KHz when probe at
-imx7d platform.
-
-Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
-(cherry picked from commit 19f553846e872b5c379b37ed029132b79566cab0)
-(cherry picked from commit 5d355407812025e5157f82b7763580e7295a40fd)
----
- drivers/i2c/busses/i2c-imx.c | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/drivers/i2c/busses/i2c-imx.c
-+++ b/drivers/i2c/busses/i2c-imx.c
-@@ -51,6 +51,7 @@
- 
- /* Default value */
- #define IMX_I2C_BIT_RATE	100000	/* 100kHz */
-+#define IMX_I2C_MAX_E_BIT_RATE	384000	/* 384kHz from e7805 errata*/
- 
- /*
-  * Enable DMA if transfer byte size is bigger than this threshold.
-@@ -161,6 +162,7 @@ enum imx_i2c_type {
- 	IMX1_I2C,
- 	IMX21_I2C,
- 	VF610_I2C,
-+	IMX7D_I2C,
- };
- 
- struct imx_i2c_hwdata {
-@@ -235,6 +237,16 @@ static struct imx_i2c_hwdata vf610_i2c_h
- 
- };
- 
-+static const struct imx_i2c_hwdata imx7d_i2c_hwdata = {
-+	.devtype		= IMX7D_I2C,
-+	.regshift		= IMX_I2C_REGSHIFT,
-+	.clk_div		= imx_i2c_clk_div,
-+	.ndivs			= ARRAY_SIZE(imx_i2c_clk_div),
-+	.i2sr_clr_opcode	= I2SR_CLR_OPCODE_W0C,
-+	.i2cr_ien_opcode	= I2CR_IEN_OPCODE_1,
-+
-+};
-+
- static const struct platform_device_id imx_i2c_devtype[] = {
- 	{
- 		.name = "imx1-i2c",
-@@ -252,6 +264,7 @@ static const struct of_device_id i2c_imx
- 	{ .compatible = "fsl,imx1-i2c", .data = &imx1_i2c_hwdata, },
- 	{ .compatible = "fsl,imx21-i2c", .data = &imx21_i2c_hwdata, },
- 	{ .compatible = "fsl,vf610-i2c", .data = &vf610_i2c_hwdata, },
-+	{ .compatible = "fsl,imx7d-i2c", .data = &imx7d_i2c_hwdata, },
- 	{ /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids);
-@@ -267,6 +280,11 @@ static inline int is_imx1_i2c(struct imx
- 	return i2c_imx->hwdata->devtype == IMX1_I2C;
- }
- 
-+static inline int is_imx7d_i2c(struct imx_i2c_struct *i2c_imx)
-+{
-+	return i2c_imx->hwdata->devtype == IMX7D_I2C;
-+}
-+
- static inline void imx_i2c_write_reg(unsigned int val,
- 		struct imx_i2c_struct *i2c_imx, unsigned int reg)
- {
-@@ -1187,6 +1205,14 @@ static int i2c_imx_probe(struct platform
- 	clk_notifier_register(i2c_imx->clk, &i2c_imx->clk_change_nb);
- 	i2c_imx_set_clk(i2c_imx, clk_get_rate(i2c_imx->clk));
- 
-+	/*
-+	 * This limit caused by an i.MX7D hardware issue(e7805 in Errata).
-+	 * If there is no limit, when the bitrate set up to 400KHz, it will
-+	 * cause the SCK low level period less than 1.3us.
-+	 */
-+	if (is_imx7d_i2c(i2c_imx) && i2c_imx->bitrate > IMX_I2C_MAX_E_BIT_RATE)
-+		i2c_imx->bitrate = IMX_I2C_MAX_E_BIT_RATE;
-+
- 	/* Set up chip registers to defaults */
- 	imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
- 			i2c_imx, IMX_I2C_I2CR);
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0006-MLK-20368-i2c-imx-Coverity-fix-divide-by-zero-warnin.patch b/target/linux/layerscape/patches-5.4/808-i2c-0006-MLK-20368-i2c-imx-Coverity-fix-divide-by-zero-warnin.patch
deleted file mode 100644
index 97f1f78230..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0006-MLK-20368-i2c-imx-Coverity-fix-divide-by-zero-warnin.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From 2c2c7e16ad0401f85dd8ff9bc0789fa10e715c0e Mon Sep 17 00:00:00 2001
-From: Clark Wang <xiaoning.wang@nxp.com>
-Date: Tue, 15 Jan 2019 10:04:30 +0800
-Subject: [PATCH] MLK-20368 i2c-imx: Coverity: fix divide by zero warning
-
-"i2c_clk_rate / 2" might be zero when the i2c_clk_rate gets the clock is
-0 or 1, so add a judgment to avoid the denominator is equal to 0.
-
-Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
-[Arul: Add support to check return value everywhere in the driver]
-Signed-off-by: Arulpandiyan Vadivel <arulpandiyan_vadivel@mentor.com>
-
-Signed-off-by: Shrikant Bobade <Shrikant_Bobade@mentor.com>
-(cherry picked from commit d382de595bffc0975ab7c0582e08dd4f7afc0c1a)
-(cherry picked from commit 456caa9ba270ca8f4f962918a0625d1a8348f316)
----
- drivers/i2c/busses/i2c-imx.c | 31 +++++++++++++++++++++++++------
- 1 file changed, 25 insertions(+), 6 deletions(-)
-
---- a/drivers/i2c/busses/i2c-imx.c
-+++ b/drivers/i2c/busses/i2c-imx.c
-@@ -514,16 +514,24 @@ static int i2c_imx_acked(struct imx_i2c_
- 	return 0;
- }
- 
--static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
-+static int i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
- 			    unsigned int i2c_clk_rate)
- {
- 	struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div;
- 	unsigned int div;
- 	int i;
- 
--	/* Divider value calculation */
- 	if (i2c_imx->cur_clk == i2c_clk_rate)
--		return;
-+		return 0;
-+
-+	/*
-+	 * Keep the denominator of the following program
-+	 * always NOT equal to 0.
-+	 */
-+
-+	/* Divider value calculation */
-+	if (!(i2c_clk_rate / 2))
-+		return -EINVAL;
- 
- 	i2c_imx->cur_clk = i2c_clk_rate;
- 
-@@ -554,20 +562,23 @@ static void i2c_imx_set_clk(struct imx_i
- 	dev_dbg(&i2c_imx->adapter.dev, "IFDR[IC]=0x%x, REAL DIV=%d\n",
- 		i2c_clk_div[i].val, i2c_clk_div[i].div);
- #endif
-+
-+	return 0;
- }
- 
- static int i2c_imx_clk_notifier_call(struct notifier_block *nb,
- 				     unsigned long action, void *data)
- {
-+	int ret = 0;
- 	struct clk_notifier_data *ndata = data;
- 	struct imx_i2c_struct *i2c_imx = container_of(nb,
- 						      struct imx_i2c_struct,
- 						      clk_change_nb);
- 
- 	if (action & POST_RATE_CHANGE)
--		i2c_imx_set_clk(i2c_imx, ndata->new_rate);
-+		ret = i2c_imx_set_clk(i2c_imx, ndata->new_rate);
- 
--	return NOTIFY_OK;
-+	return notifier_from_errno(ret);
- }
- 
- static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
-@@ -577,6 +588,10 @@ static int i2c_imx_start(struct imx_i2c_
- 
- 	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
- 
-+	result = i2c_imx_set_clk(i2c_imx, clk_get_rate(i2c_imx->clk));
-+	if (result)
-+		return result;
-+
- 	imx_i2c_write_reg(i2c_imx->ifdr, i2c_imx, IMX_I2C_IFDR);
- 	/* Enable I2C controller */
- 	imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
-@@ -1203,7 +1218,11 @@ static int i2c_imx_probe(struct platform
- 		i2c_imx->bitrate = pdata->bitrate;
- 	i2c_imx->clk_change_nb.notifier_call = i2c_imx_clk_notifier_call;
- 	clk_notifier_register(i2c_imx->clk, &i2c_imx->clk_change_nb);
--	i2c_imx_set_clk(i2c_imx, clk_get_rate(i2c_imx->clk));
-+	ret = i2c_imx_set_clk(i2c_imx, clk_get_rate(i2c_imx->clk));
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "can't get I2C clock\n");
-+		goto clk_notifier_unregister;
-+	}
- 
- 	/*
- 	 * This limit caused by an i.MX7D hardware issue(e7805 in Errata).
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0007-i2c-imx-add-workaround-for-erratum-ERR010027.patch b/target/linux/layerscape/patches-5.4/808-i2c-0007-i2c-imx-add-workaround-for-erratum-ERR010027.patch
deleted file mode 100644
index a22f9766eb..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0007-i2c-imx-add-workaround-for-erratum-ERR010027.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 8e7e594b685f3fe44cd4803e3a4634bed897c2f7 Mon Sep 17 00:00:00 2001
-From: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date: Fri, 14 Apr 2017 17:03:03 +0800
-Subject: [PATCH] i2c: imx: add workaround for erratum ERR010027
-
-ERR010027: Attempting a start cycle while the bus is busy may
-generate a short clock pulse.
-
-Software must ensure that the I2C BUS is idle by checking the
-bus busy before switching to master mode and attempting a Start
-cycle.
-
-Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
----
- drivers/i2c/busses/i2c-imx.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/i2c/busses/i2c-imx.c
-+++ b/drivers/i2c/busses/i2c-imx.c
-@@ -968,6 +968,14 @@ static int i2c_imx_xfer(struct i2c_adapt
- 		enable_runtime_pm = true;
- 	}
- 
-+	/*
-+	 * workround for ERR010027: ensure that the I2C BUS is idle
-+	 * before switching to master mode and attempting a Start cycle
-+	 */
-+	result =  i2c_imx_bus_busy(i2c_imx, 0);
-+	if (result)
-+		goto out;
-+
- 	result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
- 	if (result < 0)
- 		goto out;
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0008-i2c-imx-implement-bus-recovery-with-gpio-for-Layersc.patch b/target/linux/layerscape/patches-5.4/808-i2c-0008-i2c-imx-implement-bus-recovery-with-gpio-for-Layersc.patch
deleted file mode 100644
index f7686f358d..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0008-i2c-imx-implement-bus-recovery-with-gpio-for-Layersc.patch
+++ /dev/null
@@ -1,268 +0,0 @@
-From ddf55be668a5e5a22d4b7729e7ba92d928983168 Mon Sep 17 00:00:00 2001
-From: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date: Fri, 1 Dec 2017 15:59:28 +0800
-Subject: [PATCH] i2c: imx: implement bus recovery with gpio for Layerscape
-
-Based on the I2C specification, if the data line (SDA) is stuck low,
-the master should send nine clock pulses. The I2C slave device that
-held the bus low should release it sometime within those nine clocks.
-
-Because pinctrl is not supported on Layerscape, current bus recovery
-is not avalible for Layerscape. This patch uses an open drain GPIO
-pin to connect to the IICx_SCL to drive nine clock pulses to unlock
-the I2C bus.
-
-Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
----
- drivers/i2c/busses/i2c-imx.c | 190 ++++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 188 insertions(+), 2 deletions(-)
-
---- a/drivers/i2c/busses/i2c-imx.c
-+++ b/drivers/i2c/busses/i2c-imx.c
-@@ -39,12 +39,18 @@
- #include <linux/of.h>
- #include <linux/of_device.h>
- #include <linux/of_dma.h>
-+#include <linux/of_gpio.h>
- #include <linux/pinctrl/consumer.h>
- #include <linux/platform_data/i2c-imx.h>
- #include <linux/platform_device.h>
- #include <linux/pm_runtime.h>
- #include <linux/sched.h>
- #include <linux/slab.h>
-+#include <linux/gpio.h>
-+#include <linux/of_address.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/libata.h>
- 
- /* This will be the driver name the kernel reports */
- #define DRIVER_NAME "imx-i2c"
-@@ -110,6 +116,54 @@
- 
- #define I2C_PM_TIMEOUT		10 /* ms */
- 
-+enum pinmux_endian_type {
-+	BIG_ENDIAN,
-+	LITTLE_ENDIAN,
-+};
-+
-+struct pinmux_cfg {
-+	enum pinmux_endian_type endian; /* endian of RCWPMUXCR0 */
-+	u32 pmuxcr_offset;
-+	u32 pmuxcr_set_bit;		    /* pin mux of RCWPMUXCR0 */
-+};
-+
-+static struct pinmux_cfg ls1012a_pinmux_cfg = {
-+	.endian = BIG_ENDIAN,
-+	.pmuxcr_offset = 0x430,
-+	.pmuxcr_set_bit = 0x10,
-+};
-+
-+static struct pinmux_cfg ls1043a_pinmux_cfg = {
-+	.endian = BIG_ENDIAN,
-+	.pmuxcr_offset = 0x40C,
-+	.pmuxcr_set_bit = 0x10,
-+};
-+
-+static struct pinmux_cfg ls1046a_pinmux_cfg = {
-+	.endian = BIG_ENDIAN,
-+	.pmuxcr_offset = 0x40C,
-+	.pmuxcr_set_bit = 0x80000000,
-+};
-+
-+static const struct of_device_id pinmux_of_match[] = {
-+	{ .compatible = "fsl,ls1012a-vf610-i2c", .data = &ls1012a_pinmux_cfg},
-+	{ .compatible = "fsl,ls1043a-vf610-i2c", .data = &ls1043a_pinmux_cfg},
-+	{ .compatible = "fsl,ls1046a-vf610-i2c", .data = &ls1046a_pinmux_cfg},
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, pinmux_of_match);
-+
-+/* The SCFG, Supplemental Configuration Unit, provides SoC specific
-+ * configuration and status registers for the device. There is a
-+ * SDHC IO VSEL control register on SCFG for some platforms. It's
-+ * used to support SDHC IO voltage switching.
-+ */
-+static const struct of_device_id scfg_device_ids[] = {
-+	{ .compatible = "fsl,ls1012a-scfg", },
-+	{ .compatible = "fsl,ls1043a-scfg", },
-+	{ .compatible = "fsl,ls1046a-scfg", },
-+	{}
-+};
- /*
-  * sorted list of clock divider, register value pairs
-  * taken from table 26-5, p.26-9, Freescale i.MX
-@@ -205,6 +259,12 @@ struct imx_i2c_struct {
- 	struct pinctrl_state *pinctrl_pins_gpio;
- 
- 	struct imx_i2c_dma	*dma;
-+	int			layerscape_bus_recover;
-+	int 			gpio;
-+	int			need_set_pmuxcr;
-+	int			pmuxcr_set;
-+	int			pmuxcr_endian;
-+	void __iomem		*pmuxcr_addr;
- };
- 
- static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
-@@ -951,6 +1011,78 @@ static int i2c_imx_read(struct imx_i2c_s
- 	return 0;
- }
- 
-+/*
-+ * Based on the I2C specification, if the data line (SDA) is
-+ * stuck low, the master should send nine  * clock pulses.
-+ * The I2C slave device that held the bus low should release it
-+ * sometime within  * those nine clocks. Due to this erratum,
-+ * the I2C controller cannot generate nine clock pulses.
-+ */
-+static int i2c_imx_recovery_for_layerscape(struct imx_i2c_struct *i2c_imx)
-+{
-+	u32 pmuxcr = 0;
-+	int ret;
-+	unsigned int i, temp;
-+
-+	/* configure IICx_SCL/GPIO pin as a GPIO */
-+	if (i2c_imx->need_set_pmuxcr == 1) {
-+		pmuxcr = ioread32be(i2c_imx->pmuxcr_addr);
-+		if (i2c_imx->pmuxcr_endian == BIG_ENDIAN)
-+			iowrite32be(i2c_imx->pmuxcr_set|pmuxcr,
-+				    i2c_imx->pmuxcr_addr);
-+		else
-+			iowrite32(i2c_imx->pmuxcr_set|pmuxcr,
-+				  i2c_imx->pmuxcr_addr);
-+	}
-+
-+	ret = gpio_request(i2c_imx->gpio, i2c_imx->adapter.name);
-+	if (ret) {
-+		dev_err(&i2c_imx->adapter.dev,
-+			"can't get gpio: %d\n", ret);
-+		return ret;
-+	}
-+
-+	/* Configure GPIO pin as an output and open drain. */
-+	gpio_direction_output(i2c_imx->gpio, 1);
-+	udelay(10);
-+
-+	/* Write data to generate 9 pulses */
-+	for (i = 0; i < 9; i++) {
-+		gpio_set_value(i2c_imx->gpio, 1);
-+		udelay(10);
-+		gpio_set_value(i2c_imx->gpio, 0);
-+		udelay(10);
-+	}
-+	/* ensure that the last level sent is always high */
-+	gpio_set_value(i2c_imx->gpio, 1);
-+
-+	/*
-+	 * Set I2Cx_IBCR = 0h00 to generate a STOP and then
-+	 * set I2Cx_IBCR = 0h80 to reset
-+	 */
-+	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
-+	temp &= ~(I2CR_MSTA | I2CR_MTX);
-+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
-+
-+	/* Restore the saved value of the register SCFG_RCWPMUXCR0 */
-+	if (i2c_imx->need_set_pmuxcr == 1) {
-+		if (i2c_imx->pmuxcr_endian == BIG_ENDIAN)
-+			iowrite32be(pmuxcr, i2c_imx->pmuxcr_addr);
-+		else
-+			iowrite32(pmuxcr, i2c_imx->pmuxcr_addr);
-+	}
-+	/*
-+	 * Set I2C_IBSR[IBAL] to clear the IBAL bit if-
-+	 * I2C_IBSR[IBAL] = 1
-+	 */
-+	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
-+	if (temp & I2SR_IAL) {
-+		temp &= ~I2SR_IAL;
-+		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
-+	}
-+	return 0;
-+}
-+
- static int i2c_imx_xfer(struct i2c_adapter *adapter,
- 						struct i2c_msg *msgs, int num)
- {
-@@ -973,8 +1105,13 @@ static int i2c_imx_xfer(struct i2c_adapt
- 	 * before switching to master mode and attempting a Start cycle
- 	 */
- 	result =  i2c_imx_bus_busy(i2c_imx, 0);
--	if (result)
--		goto out;
-+	if (result) {
-+		/* timeout */
-+		if ((result == -ETIMEDOUT) && (i2c_imx->layerscape_bus_recover == 1))
-+			i2c_imx_recovery_for_layerscape(i2c_imx);
-+		else
-+			goto out;
-+	}
- 
- 	result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
- 	if (result < 0)
-@@ -1121,6 +1258,50 @@ static int i2c_imx_init_recovery_info(st
- 	return 0;
- }
- 
-+/*
-+ * switch SCL and SDA to their GPIO function and do some bitbanging
-+ * for bus recovery.
-+ * There are platforms such as Layerscape that don't support pinctrl, so add
-+ * workaround for layerscape, it has no effect for other platforms.
-+ */
-+static int i2c_imx_init_recovery_for_layerscape(
-+		struct imx_i2c_struct *i2c_imx,
-+		struct platform_device *pdev)
-+{
-+	const struct of_device_id *of_id;
-+	struct device_node *np		= pdev->dev.of_node;
-+	struct pinmux_cfg		*pinmux_cfg;
-+	struct device_node *scfg_node;
-+	void __iomem *scfg_base = NULL;
-+
-+	i2c_imx->gpio = of_get_named_gpio(np, "scl-gpios", 0);
-+	if (!gpio_is_valid(i2c_imx->gpio)) {
-+		dev_info(&pdev->dev, "scl-gpios not found\n");
-+		return 0;
-+	}
-+	pinmux_cfg = devm_kzalloc(&pdev->dev, sizeof(*pinmux_cfg), GFP_KERNEL);
-+	if (!pinmux_cfg)
-+		return -ENOMEM;
-+
-+	i2c_imx->need_set_pmuxcr = 0;
-+	of_id = of_match_node(pinmux_of_match, np);
-+	if (of_id) {
-+		pinmux_cfg = (struct pinmux_cfg *)of_id->data;
-+		i2c_imx->pmuxcr_endian = pinmux_cfg->endian;
-+		i2c_imx->pmuxcr_set = pinmux_cfg->pmuxcr_set_bit;
-+		scfg_node = of_find_matching_node(NULL, scfg_device_ids);
-+		if (scfg_node) {
-+			scfg_base = of_iomap(scfg_node, 0);
-+			if (scfg_base) {
-+				i2c_imx->pmuxcr_addr = scfg_base + pinmux_cfg->pmuxcr_offset;
-+				i2c_imx->need_set_pmuxcr = 1;
-+			}
-+		}
-+	}
-+	i2c_imx->layerscape_bus_recover = 1;
-+	return 0;
-+}
-+
- static u32 i2c_imx_func(struct i2c_adapter *adapter)
- {
- 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
-@@ -1245,8 +1426,13 @@ static int i2c_imx_probe(struct platform
- 			i2c_imx, IMX_I2C_I2CR);
- 	imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
- 
-+#ifdef CONFIG_ARCH_LAYERSCAPE
-+	/* Init optional bus recovery for layerscape */
-+	ret = i2c_imx_init_recovery_for_layerscape(i2c_imx, pdev);
-+#else
- 	/* Init optional bus recovery function */
- 	ret = i2c_imx_init_recovery_info(i2c_imx, pdev);
-+#endif
- 	/* Give it another chance if pinctrl used is not ready yet */
- 	if (ret == -EPROBE_DEFER)
- 		goto clk_notifier_unregister;
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0009-i2c-imx-get-rid-of-CONFIG_ARCH_LAYERSCAPE.patch b/target/linux/layerscape/patches-5.4/808-i2c-0009-i2c-imx-get-rid-of-CONFIG_ARCH_LAYERSCAPE.patch
deleted file mode 100644
index 9287cd2df2..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0009-i2c-imx-get-rid-of-CONFIG_ARCH_LAYERSCAPE.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From c35124bc3fc5f9f2a79815721db139e5bf186391 Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Thu, 26 Sep 2019 21:00:55 +0800
-Subject: [PATCH] i2c: imx: get rid of CONFIG_ARCH_LAYERSCAPE
-
-We can't use CONFIG_ARCH_LAYERSCAPE for one Image multiple platforms
-support.
-
-Reviewed-by: Biwen Li <biwen.li@nxp.com>
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- drivers/i2c/busses/i2c-imx.c | 13 ++++++-------
- 1 file changed, 6 insertions(+), 7 deletions(-)
-
---- a/drivers/i2c/busses/i2c-imx.c
-+++ b/drivers/i2c/busses/i2c-imx.c
-@@ -1426,13 +1426,12 @@ static int i2c_imx_probe(struct platform
- 			i2c_imx, IMX_I2C_I2CR);
- 	imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
- 
--#ifdef CONFIG_ARCH_LAYERSCAPE
--	/* Init optional bus recovery for layerscape */
--	ret = i2c_imx_init_recovery_for_layerscape(i2c_imx, pdev);
--#else
--	/* Init optional bus recovery function */
--	ret = i2c_imx_init_recovery_info(i2c_imx, pdev);
--#endif
-+	/* Init optional bus recovery */
-+	if (of_match_node(pinmux_of_match, pdev->dev.of_node))
-+		ret = i2c_imx_init_recovery_for_layerscape(i2c_imx, pdev);
-+	else
-+		ret = i2c_imx_init_recovery_info(i2c_imx, pdev);
-+
- 	/* Give it another chance if pinctrl used is not ready yet */
- 	if (ret == -EPROBE_DEFER)
- 		goto clk_notifier_unregister;
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0010-i2c-imx-fix-system-hang-due-to-access-i2c-registers-.patch b/target/linux/layerscape/patches-5.4/808-i2c-0010-i2c-imx-fix-system-hang-due-to-access-i2c-registers-.patch
deleted file mode 100644
index 435bb14e8d..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0010-i2c-imx-fix-system-hang-due-to-access-i2c-registers-.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 97db2ca4485dc7b10b8382832befe607ade59a6b Mon Sep 17 00:00:00 2001
-From: Dong Aisheng <aisheng.dong@nxp.com>
-Date: Sat, 26 Jan 2019 17:51:59 +0800
-Subject: [PATCH] i2c: imx: fix system hang due to access i2c registers without
- clock
-
-Currently, i2c_imx_bus_busy in i2c_imx_xfer is called before
-pm_runtime_get which means the clocks are still not enabled.
-This will cause a hang on IMX as IMX requires accessing registers
-with clocks.
-
-So let's change the order to ensure the clocks are enabled before
-accessing registers. This is also a more safe way to access registers,
-suppose shouldn't affect other platforms.
-
-Fixes: 4a6ebf1c125c ("i2c: imx: add workaround for erratum ERR010027")
-Reviewed-by: Biwen Li <biwen.li@nxp.com>
-Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
----
- drivers/i2c/busses/i2c-imx.c | 9 ++++-----
- 1 file changed, 4 insertions(+), 5 deletions(-)
-
---- a/drivers/i2c/busses/i2c-imx.c
-+++ b/drivers/i2c/busses/i2c-imx.c
-@@ -1094,12 +1094,15 @@ static int i2c_imx_xfer(struct i2c_adapt
- 
- 	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
- 
--
- 	if (!pm_runtime_enabled(i2c_imx->adapter.dev.parent)) {
- 		pm_runtime_enable(i2c_imx->adapter.dev.parent);
- 		enable_runtime_pm = true;
- 	}
- 
-+	result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
-+	if (result < 0)
-+		goto out;
-+
- 	/*
- 	 * workround for ERR010027: ensure that the I2C BUS is idle
- 	 * before switching to master mode and attempting a Start cycle
-@@ -1113,10 +1116,6 @@ static int i2c_imx_xfer(struct i2c_adapt
- 			goto out;
- 	}
- 
--	result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
--	if (result < 0)
--		goto out;
--
- 	/* Start I2C transfer */
- 	result = i2c_imx_start(i2c_imx);
- 	if (result) {
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0011-i2c-imx-support-slave-mode-for-imx-I2C-driver.patch b/target/linux/layerscape/patches-5.4/808-i2c-0011-i2c-imx-support-slave-mode-for-imx-I2C-driver.patch
deleted file mode 100644
index 5377d05d0c..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0011-i2c-imx-support-slave-mode-for-imx-I2C-driver.patch
+++ /dev/null
@@ -1,282 +0,0 @@
-From 865433df5d11aef7cfe5d51b362b6276bddb7a15 Mon Sep 17 00:00:00 2001
-From: Biwen Li <biwen.li@nxp.com>
-Date: Fri, 2 Aug 2019 17:45:56 +0800
-Subject: [PATCH] i2c: imx: support slave mode for imx I2C driver
-
-The patch supports slave mode for imx I2C driver
-
-Reviewed-by: Clark Wang <xiaoning.wang@nxp.com>
-Signed-off-by: Biwen Li <biwen.li@nxp.com>
----
- drivers/i2c/busses/i2c-imx.c | 219 +++++++++++++++++++++++++++++++++++++++----
- 1 file changed, 201 insertions(+), 18 deletions(-)
-
---- a/drivers/i2c/busses/i2c-imx.c
-+++ b/drivers/i2c/busses/i2c-imx.c
-@@ -265,6 +265,9 @@ struct imx_i2c_struct {
- 	int			pmuxcr_set;
- 	int			pmuxcr_endian;
- 	void __iomem		*pmuxcr_addr;
-+#if IS_ENABLED(CONFIG_I2C_SLAVE)
-+	struct i2c_client	*slave;
-+#endif
- };
- 
- static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
-@@ -357,6 +360,14 @@ static inline unsigned char imx_i2c_read
- 	return readb(i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
- }
- 
-+/* Set up i2c controller register and i2c status register to default value. */
-+static void i2c_imx_reset_regs(struct imx_i2c_struct *i2c_imx)
-+{
-+	imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
-+			i2c_imx, IMX_I2C_I2CR);
-+	imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
-+}
-+
- /* Functions for DMA support */
- static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
- 						dma_addr_t phy_addr)
-@@ -705,21 +716,33 @@ static void i2c_imx_stop(struct imx_i2c_
- 	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
- }
- 
--static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
-+/* Clear interrupt flag bit */
-+static void i2c_imx_clr_if_bit(unsigned int status, struct imx_i2c_struct *i2c_imx)
- {
--	struct imx_i2c_struct *i2c_imx = dev_id;
--	unsigned int temp;
-+	status &= ~I2SR_IIF;
-+	status |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
-+	imx_i2c_write_reg(status, i2c_imx, IMX_I2C_I2SR);
-+}
- 
--	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
--	if (temp & I2SR_IIF) {
--		/* save status register */
--		i2c_imx->i2csr = temp;
--		i2c_imx_clear_irq(i2c_imx, I2SR_IIF);
--		wake_up(&i2c_imx->queue);
--		return IRQ_HANDLED;
--	}
-+/* Clear arbitration lost bit */
-+static void i2c_imx_clr_al_bit(unsigned int status, struct imx_i2c_struct *i2c_imx)
-+{
-+	status &= ~I2SR_IAL;
-+	status |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IAL);
-+	imx_i2c_write_reg(status, i2c_imx, IMX_I2C_I2SR);
-+}
-+
-+static irqreturn_t i2c_imx_master_isr(struct imx_i2c_struct *i2c_imx)
-+{
-+	unsigned int status;
-+
-+	/* Save status register */
-+	status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
-+	i2c_imx->i2csr = status | I2SR_IIF;
-+
-+	wake_up(&i2c_imx->queue);
- 
--	return IRQ_NONE;
-+	return IRQ_HANDLED;
- }
- 
- static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
-@@ -1094,6 +1117,13 @@ static int i2c_imx_xfer(struct i2c_adapt
- 
- 	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
- 
-+#if IS_ENABLED(CONFIG_I2C_SLAVE)
-+	if (i2c_imx->slave) {
-+		dev_err(&i2c_imx->adapter.dev, "Please not do operations of master mode in slave mode");
-+		return -EBUSY;
-+	}
-+#endif
-+
- 	if (!pm_runtime_enabled(i2c_imx->adapter.dev.parent)) {
- 		pm_runtime_enable(i2c_imx->adapter.dev.parent);
- 		enable_runtime_pm = true;
-@@ -1307,11 +1337,169 @@ static u32 i2c_imx_func(struct i2c_adapt
- 		| I2C_FUNC_SMBUS_READ_BLOCK_DATA;
- }
- 
-+#if IS_ENABLED(CONFIG_I2C_SLAVE)
-+static int i2c_imx_slave_init(struct imx_i2c_struct *i2c_imx)
-+{
-+	int temp;
-+
-+	/* Resume */
-+	temp = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
-+	if (temp < 0) {
-+		dev_err(&i2c_imx->adapter.dev, "failed to resume i2c controller");
-+		return temp;
-+	}
-+
-+	/* Set slave addr. */
-+	imx_i2c_write_reg((i2c_imx->slave->addr << 1), i2c_imx, IMX_I2C_IADR);
-+
-+	i2c_imx_reset_regs(i2c_imx);
-+
-+	/* Enable module */
-+	temp = i2c_imx->hwdata->i2cr_ien_opcode;
-+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
-+
-+	/* Enable interrupt from i2c module */
-+	temp |= I2CR_IIEN;
-+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
-+
-+	/* Wait controller to be stable */
-+	usleep_range(50, 150);
-+	return 0;
-+}
-+
-+static irqreturn_t i2c_imx_slave_isr(struct imx_i2c_struct *i2c_imx)
-+{
-+	unsigned int status, ctl;
-+	u8 value;
-+
-+	if (!i2c_imx->slave) {
-+		dev_err(&i2c_imx->adapter.dev, "cannot deal with slave irq,i2c_imx->slave is null");
-+		return IRQ_NONE;
-+	}
-+
-+	status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
-+	ctl = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
-+	if (status & I2SR_IAL) { /* Arbitration lost */
-+		i2c_imx_clr_al_bit(status, i2c_imx);
-+	} else if (status & I2SR_IAAS) { /* Addressed as a slave */
-+		if (status & I2SR_SRW) { /* Master wants to read from us*/
-+			dev_dbg(&i2c_imx->adapter.dev, "read requested");
-+			i2c_slave_event(i2c_imx->slave, I2C_SLAVE_READ_REQUESTED, &value);
-+
-+			/* Slave transmit */
-+			ctl |= I2CR_MTX;
-+			imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
-+
-+			/* Send data */
-+			imx_i2c_write_reg(value, i2c_imx, IMX_I2C_I2DR);
-+		} else { /* Master wants to write to us */
-+			dev_dbg(&i2c_imx->adapter.dev, "write requested");
-+			i2c_slave_event(i2c_imx->slave,	I2C_SLAVE_WRITE_REQUESTED, &value);
-+
-+			/* Slave receive */
-+			ctl &= ~I2CR_MTX;
-+			imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
-+			/* Dummy read */
-+			imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
-+		}
-+	} else if (!(ctl & I2CR_MTX)) { /* Receive mode */
-+			if (status & I2SR_IBB) { /* No STOP signal detected */
-+				ctl &= ~I2CR_MTX;
-+				imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
-+
-+				value = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
-+				i2c_slave_event(i2c_imx->slave,	I2C_SLAVE_WRITE_RECEIVED, &value);
-+			} else { /* STOP signal is detected */
-+				dev_dbg(&i2c_imx->adapter.dev,
-+					"STOP signal detected");
-+				i2c_slave_event(i2c_imx->slave, I2C_SLAVE_STOP, &value);
-+			}
-+	} else if (!(status & I2SR_RXAK)) {	/* Transmit mode received ACK */
-+		ctl |= I2CR_MTX;
-+		imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
-+
-+		i2c_slave_event(i2c_imx->slave,	I2C_SLAVE_READ_PROCESSED, &value);
-+
-+		imx_i2c_write_reg(value, i2c_imx, IMX_I2C_I2DR);
-+	} else { /* Transmit mode received NAK */
-+		ctl &= ~I2CR_MTX;
-+		imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
-+		imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
-+	}
-+	return IRQ_HANDLED;
-+}
-+
-+static int i2c_imx_reg_slave(struct i2c_client *client)
-+{
-+	struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
-+	int ret;
-+	if (i2c_imx->slave)
-+		return -EBUSY;
-+
-+	i2c_imx->slave = client;
-+
-+	ret = i2c_imx_slave_init(i2c_imx);
-+	if (ret < 0)
-+		dev_err(&i2c_imx->adapter.dev, "failed to switch to slave mode");
-+
-+	return ret;
-+}
-+
-+static int i2c_imx_unreg_slave(struct i2c_client *client)
-+{
-+	struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
-+	int ret;
-+
-+	if (!i2c_imx->slave)
-+		return -EINVAL;
-+
-+	/* Reset slave address. */
-+	imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
-+
-+	i2c_imx_reset_regs(i2c_imx);
-+
-+	i2c_imx->slave = NULL;
-+
-+	/* Suspend */
-+	ret = pm_runtime_put_sync(i2c_imx->adapter.dev.parent);
-+	if (ret < 0)
-+		dev_err(&i2c_imx->adapter.dev, "failed to suspend i2c controller");
-+
-+	return ret;
-+}
-+#endif
-+
- static const struct i2c_algorithm i2c_imx_algo = {
- 	.master_xfer	= i2c_imx_xfer,
- 	.functionality	= i2c_imx_func,
-+#if IS_ENABLED(CONFIG_I2C_SLAVE)
-+	.reg_slave	= i2c_imx_reg_slave,
-+	.unreg_slave	= i2c_imx_unreg_slave,
-+#endif
- };
- 
-+static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
-+{
-+	struct imx_i2c_struct *i2c_imx = dev_id;
-+	unsigned int status, ctl;
-+	irqreturn_t irq_status = IRQ_NONE;
-+
-+	status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
-+	ctl = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
-+
-+	if (status & I2SR_IIF) {
-+		i2c_imx_clr_if_bit(status, i2c_imx);
-+		if (ctl & I2CR_MSTA)
-+			irq_status = i2c_imx_master_isr(i2c_imx);
-+#if IS_ENABLED(CONFIG_I2C_SLAVE)
-+		else
-+			irq_status = i2c_imx_slave_isr(i2c_imx);
-+#endif
-+	}
-+
-+	return irq_status;
-+}
-+
- static int i2c_imx_probe(struct platform_device *pdev)
- {
- 	struct imx_i2c_struct *i2c_imx;
-@@ -1420,10 +1608,7 @@ static int i2c_imx_probe(struct platform
- 	if (is_imx7d_i2c(i2c_imx) && i2c_imx->bitrate > IMX_I2C_MAX_E_BIT_RATE)
- 		i2c_imx->bitrate = IMX_I2C_MAX_E_BIT_RATE;
- 
--	/* Set up chip registers to defaults */
--	imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
--			i2c_imx, IMX_I2C_I2CR);
--	imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
-+	i2c_imx_reset_regs(i2c_imx);
- 
- 	/* Init optional bus recovery */
- 	if (of_match_node(pinmux_of_match, pdev->dev.of_node))
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0012-i2c-imx-correct-code-of-errata-A-010650-for-layersca.patch b/target/linux/layerscape/patches-5.4/808-i2c-0012-i2c-imx-correct-code-of-errata-A-010650-for-layersca.patch
deleted file mode 100644
index 7fd505df42..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0012-i2c-imx-correct-code-of-errata-A-010650-for-layersca.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 27ea8554c8fdcdf1d7aba5ce47630d878ce96691 Mon Sep 17 00:00:00 2001
-From: Biwen Li <biwen.li@nxp.com>
-Date: Thu, 24 Oct 2019 13:14:44 +0800
-Subject: [PATCH] i2c: imx: correct code of errata A-010650 for layerscape
- platform
-
-- Simplify code with helper function i2c_imx_clr_al_bit
-- Fix an error about clearing arbitration lost bit
-- Fix an error that not set I2Cx_IBCR following by
-  the workaround of A-010650 (in step 5)
-
-Reviewed-by: Clark Wang <xiaoning.wang@nxp.com>
-Signed-off-by: Biwen Li <biwen.li@nxp.com>
----
- drivers/i2c/busses/i2c-imx.c | 38 +++++++++++++++++++-------------------
- 1 file changed, 19 insertions(+), 19 deletions(-)
-
---- a/drivers/i2c/busses/i2c-imx.c
-+++ b/drivers/i2c/busses/i2c-imx.c
-@@ -516,6 +516,14 @@ static void i2c_imx_clear_irq(struct imx
- 	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
- }
- 
-+/* Clear arbitration lost bit */
-+static void i2c_imx_clr_al_bit(unsigned int status, struct imx_i2c_struct *i2c_imx)
-+{
-+	status &= ~I2SR_IAL;
-+	status |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IAL);
-+	imx_i2c_write_reg(status, i2c_imx, IMX_I2C_I2SR);
-+}
-+
- static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
- {
- 	unsigned long orig_jiffies = jiffies;
-@@ -528,7 +536,7 @@ static int i2c_imx_bus_busy(struct imx_i
- 
- 		/* check for arbitration lost */
- 		if (temp & I2SR_IAL) {
--			i2c_imx_clear_irq(i2c_imx, I2SR_IAL);
-+			i2c_imx_clr_al_bit(temp, i2c_imx);
- 			return -EAGAIN;
- 		}
- 
-@@ -724,14 +732,6 @@ static void i2c_imx_clr_if_bit(unsigned
- 	imx_i2c_write_reg(status, i2c_imx, IMX_I2C_I2SR);
- }
- 
--/* Clear arbitration lost bit */
--static void i2c_imx_clr_al_bit(unsigned int status, struct imx_i2c_struct *i2c_imx)
--{
--	status &= ~I2SR_IAL;
--	status |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IAL);
--	imx_i2c_write_reg(status, i2c_imx, IMX_I2C_I2SR);
--}
--
- static irqreturn_t i2c_imx_master_isr(struct imx_i2c_struct *i2c_imx)
- {
- 	unsigned int status;
-@@ -1080,12 +1080,14 @@ static int i2c_imx_recovery_for_layersca
- 	gpio_set_value(i2c_imx->gpio, 1);
- 
- 	/*
--	 * Set I2Cx_IBCR = 0h00 to generate a STOP and then
--	 * set I2Cx_IBCR = 0h80 to reset
-+	 * Set I2Cx_IBCR = 0h00 to generate a STOP
- 	 */
--	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
--	temp &= ~(I2CR_MSTA | I2CR_MTX);
--	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
-+	imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode, i2c_imx, IMX_I2C_I2CR);
-+
-+	/*
-+	 * Set I2Cx_IBCR = 0h80 to reset the I2Cx controller
-+	 */
-+	imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode | I2CR_IEN, i2c_imx, IMX_I2C_I2CR);
- 
- 	/* Restore the saved value of the register SCFG_RCWPMUXCR0 */
- 	if (i2c_imx->need_set_pmuxcr == 1) {
-@@ -1099,10 +1101,9 @@ static int i2c_imx_recovery_for_layersca
- 	 * I2C_IBSR[IBAL] = 1
- 	 */
- 	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
--	if (temp & I2SR_IAL) {
--		temp &= ~I2SR_IAL;
--		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
--	}
-+	if (temp & I2SR_IAL)
-+		i2c_imx_clr_al_bit(temp, i2c_imx);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0013-LF-98-i2c-imx-fix-the-judgement-of-slave-mode-in-isr.patch b/target/linux/layerscape/patches-5.4/808-i2c-0013-LF-98-i2c-imx-fix-the-judgement-of-slave-mode-in-isr.patch
deleted file mode 100644
index cd404efcc0..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0013-LF-98-i2c-imx-fix-the-judgement-of-slave-mode-in-isr.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 85048a8a0df324df94f9585c1e01d0a4419de4dc Mon Sep 17 00:00:00 2001
-From: Clark Wang <xiaoning.wang@nxp.com>
-Date: Wed, 27 Nov 2019 14:23:55 +0800
-Subject: [PATCH] LF-98 i2c: imx: fix the judgement of slave mode in isr
-
-The I2CR[MSTA] will be modified by software or hardware even in master
-mode. The judgment of slave mode by reading CR register is unreliable.
-Change to use i2c_imx->slave registered status to judge i2c mode.
-
-Acked-by: Fugang Duan <fugang.duan@nxp.com>
-Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
----
- drivers/i2c/busses/i2c-imx.c | 13 +++++--------
- 1 file changed, 5 insertions(+), 8 deletions(-)
-
---- a/drivers/i2c/busses/i2c-imx.c
-+++ b/drivers/i2c/busses/i2c-imx.c
-@@ -1482,23 +1482,20 @@ static const struct i2c_algorithm i2c_im
- static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
- {
- 	struct imx_i2c_struct *i2c_imx = dev_id;
--	unsigned int status, ctl;
--	irqreturn_t irq_status = IRQ_NONE;
-+	unsigned int status;
- 
- 	status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
--	ctl = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
- 
- 	if (status & I2SR_IIF) {
- 		i2c_imx_clr_if_bit(status, i2c_imx);
--		if (ctl & I2CR_MSTA)
--			irq_status = i2c_imx_master_isr(i2c_imx);
- #if IS_ENABLED(CONFIG_I2C_SLAVE)
--		else
--			irq_status = i2c_imx_slave_isr(i2c_imx);
-+		if (i2c_imx->slave)
-+			return i2c_imx_slave_isr(i2c_imx);
- #endif
-+		return i2c_imx_master_isr(i2c_imx);
- 	}
- 
--	return irq_status;
-+	return IRQ_NONE;
- }
- 
- static int i2c_imx_probe(struct platform_device *pdev)
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0014-i2c-mux-pca954x-support-property-idle-state.patch b/target/linux/layerscape/patches-5.4/808-i2c-0014-i2c-mux-pca954x-support-property-idle-state.patch
deleted file mode 100644
index 4263717f43..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0014-i2c-mux-pca954x-support-property-idle-state.patch
+++ /dev/null
@@ -1,165 +0,0 @@
-From 5b51284db77e6383ff438b1dd21ee83bb6eaa895 Mon Sep 17 00:00:00 2001
-From: Biwen Li <biwen.li@nxp.com>
-Date: Tue, 22 Oct 2019 12:11:51 +0800
-Subject: [PATCH] i2c: mux: pca954x: support property idle-state
-
-This supports property idle-state,if present,
-overrides i2c-mux-idle-disconnect.
-
-My use cases:
-	- Use the property idle-state to fix
-	  an errata on LS2085ARDB and LS2088ARDB.
-	- Errata id: E-00013(board LS2085ARDB and
-	  LS2088ARDB revision on Rev.B, Rev.C and Rev.D).
-	- About E-00013:
-	  - Description: I2C1 and I2C3 buses
-	    are missing pull-up.
-	  - Impact: When the PCA954x device is tri-stated, the I2C bus
-	    will float. This makes the I2C bus and its associated
-	    downstream devices inaccessible.
-	  - Hardware fix: Populate resistors R189 and R190 for I2C1
-	    and resistors R228 and R229 for I2C3.
-	  - Software fix: Remove the tri-state option from the PCA954x
-	    driver(PCA954x always on enable status, specify a
-	    channel zero in dts to fix the errata E-00013).
-
-Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Biwen Li <biwen.li@nxp.com>
----
- drivers/i2c/muxes/i2c-mux-pca954x.c | 69 ++++++++++++++++++++++++-------------
- 1 file changed, 46 insertions(+), 23 deletions(-)
-
---- a/drivers/i2c/muxes/i2c-mux-pca954x.c
-+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
-@@ -87,7 +87,7 @@ struct pca954x {
- 
- 	u8 last_chan;		/* last register value */
- 	/* MUX_IDLE_AS_IS, MUX_IDLE_DISCONNECT or >= 0 for channel */
--	s8 idle_state;
-+	s32 idle_state;
- 
- 	struct i2c_client *client;
- 
-@@ -237,20 +237,23 @@ static int pca954x_reg_write(struct i2c_
- 				I2C_SMBUS_BYTE, &dummy);
- }
- 
-+static u8 pca954x_regval(struct pca954x *data, u8 chan)
-+{
-+	/* We make switches look like muxes, not sure how to be smarter. */
-+	if (data->chip->muxtype == pca954x_ismux)
-+		return chan | data->chip->enable;
-+	else
-+		return 1 << chan;
-+}
-+
- static int pca954x_select_chan(struct i2c_mux_core *muxc, u32 chan)
- {
- 	struct pca954x *data = i2c_mux_priv(muxc);
- 	struct i2c_client *client = data->client;
--	const struct chip_desc *chip = data->chip;
- 	u8 regval;
- 	int ret = 0;
- 
--	/* we make switches look like muxes, not sure how to be smarter */
--	if (chip->muxtype == pca954x_ismux)
--		regval = chan | chip->enable;
--	else
--		regval = 1 << chan;
--
-+	regval = pca954x_regval(data, chan);
- 	/* Only select the channel if its different from the last channel */
- 	if (data->last_chan != regval) {
- 		ret = pca954x_reg_write(muxc->parent, client, regval);
-@@ -264,7 +267,7 @@ static int pca954x_deselect_mux(struct i
- {
- 	struct pca954x *data = i2c_mux_priv(muxc);
- 	struct i2c_client *client = data->client;
--	s8 idle_state;
-+	s32 idle_state;
- 
- 	idle_state = READ_ONCE(data->idle_state);
- 	if (idle_state >= 0)
-@@ -410,6 +413,22 @@ static void pca954x_cleanup(struct i2c_m
- 	i2c_mux_del_adapters(muxc);
- }
- 
-+static int pca954x_init(struct i2c_client *client, struct pca954x *data)
-+{
-+	int ret;
-+	if (data->idle_state >= 0) {
-+		data->last_chan = pca954x_regval(data, data->idle_state);
-+	} else {
-+		/* Disconnect multiplexer */
-+		data->last_chan = 0;
-+	}
-+	ret = i2c_smbus_write_byte(client, data->last_chan);
-+	if (ret < 0)
-+		data->last_chan = 0;
-+
-+	return ret;
-+}
-+
- /*
-  * I2C init/probing/exit functions
-  */
-@@ -419,7 +438,6 @@ static int pca954x_probe(struct i2c_clie
- 	struct i2c_adapter *adap = client->adapter;
- 	struct device *dev = &client->dev;
- 	struct device_node *np = dev->of_node;
--	bool idle_disconnect_dt;
- 	struct gpio_desc *gpio;
- 	struct i2c_mux_core *muxc;
- 	struct pca954x *data;
-@@ -470,23 +488,24 @@ static int pca954x_probe(struct i2c_clie
- 		}
- 	}
- 
--	/* Write the mux register at addr to verify
-+	data->idle_state = MUX_IDLE_AS_IS;
-+	if (of_property_read_u32(np, "idle-state", &data->idle_state)) {
-+		if (np && of_property_read_bool(np, "i2c-mux-idle-disconnect"))
-+			data->idle_state = MUX_IDLE_DISCONNECT;
-+	}
-+
-+	/*
-+	 * Write the mux register at addr to verify
- 	 * that the mux is in fact present. This also
--	 * initializes the mux to disconnected state.
-+	 * initializes the mux to a channel
-+	 * or disconnected state.
- 	 */
--	if (i2c_smbus_write_byte(client, 0) < 0) {
-+	ret = pca954x_init(client, data);
-+	if (ret < 0) {
- 		dev_warn(dev, "probe failed\n");
- 		return -ENODEV;
- 	}
- 
--	data->last_chan = 0;		   /* force the first selection */
--	data->idle_state = MUX_IDLE_AS_IS;
--
--	idle_disconnect_dt = np &&
--		of_property_read_bool(np, "i2c-mux-idle-disconnect");
--	if (idle_disconnect_dt)
--		data->idle_state = MUX_IDLE_DISCONNECT;
--
- 	ret = pca954x_irq_setup(muxc);
- 	if (ret)
- 		goto fail_cleanup;
-@@ -538,9 +557,13 @@ static int pca954x_resume(struct device
- 	struct i2c_client *client = to_i2c_client(dev);
- 	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
- 	struct pca954x *data = i2c_mux_priv(muxc);
-+	int ret;
- 
--	data->last_chan = 0;
--	return i2c_smbus_write_byte(client, 0);
-+	ret = pca954x_init(client, data);
-+	if (ret < 0)
-+		dev_err(&client->dev, "failed to verify the mux, the mux maybe not present in fact\n");
-+
-+	return ret;
- }
- #endif
- 
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0015-LF-263-2-i2c-imx-increase-PM-timeout-to-avoid-operat.patch b/target/linux/layerscape/patches-5.4/808-i2c-0015-LF-263-2-i2c-imx-increase-PM-timeout-to-avoid-operat.patch
deleted file mode 100644
index 7579244c90..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0015-LF-263-2-i2c-imx-increase-PM-timeout-to-avoid-operat.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 929ddb0a7cbc09132512ede0afc935d040e84edf Mon Sep 17 00:00:00 2001
-From: Clark Wang <xiaoning.wang@nxp.com>
-Date: Fri, 29 Nov 2019 17:39:58 +0800
-Subject: [PATCH] LF-263-2 i2c: imx: increase PM timeout to avoid operate clk
- frequently
-
-Switching the clock frequently will affect the data transmission
-efficiency, and prolong the timeout to reduce autosuspend times for
-i2c-imx.
-
-Acked-by: Fugang Duan <fugang.duan@nxp.com>
-Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
----
- drivers/i2c/busses/i2c-imx.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/i2c/busses/i2c-imx.c
-+++ b/drivers/i2c/busses/i2c-imx.c
-@@ -114,7 +114,7 @@
- #define I2CR_IEN_OPCODE_0	0x0
- #define I2CR_IEN_OPCODE_1	I2CR_IEN
- 
--#define I2C_PM_TIMEOUT		10 /* ms */
-+#define I2C_PM_TIMEOUT		1000 /* ms */
- 
- enum pinmux_endian_type {
- 	BIG_ENDIAN,
diff --git a/target/linux/layerscape/patches-5.4/808-i2c-0016-LF-162-i2c-imx-Defer-probing-if-EDMA-not-available.patch b/target/linux/layerscape/patches-5.4/808-i2c-0016-LF-162-i2c-imx-Defer-probing-if-EDMA-not-available.patch
deleted file mode 100644
index 815cb0efe6..0000000000
--- a/target/linux/layerscape/patches-5.4/808-i2c-0016-LF-162-i2c-imx-Defer-probing-if-EDMA-not-available.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 9de3b340d84b75f93081f871b640a065cba4ded0 Mon Sep 17 00:00:00 2001
-From: Peng Ma <peng.ma@nxp.com>
-Date: Tue, 26 Nov 2019 16:02:00 +0800
-Subject: [PATCH] LF-162: i2c: imx: Defer probing if EDMA not available
-
-EDMA may be not available or defered due to dependencies on
-other modules, If these scenarios is encountered, we should
-defer probing.
-
-Signed-off-by: Peng Ma <peng.ma@nxp.com>
----
- drivers/i2c/busses/i2c-imx.c | 16 +++++++++++-----
- 1 file changed, 11 insertions(+), 5 deletions(-)
-
---- a/drivers/i2c/busses/i2c-imx.c
-+++ b/drivers/i2c/busses/i2c-imx.c
-@@ -369,8 +369,8 @@ static void i2c_imx_reset_regs(struct im
- }
- 
- /* Functions for DMA support */
--static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
--						dma_addr_t phy_addr)
-+static int i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
-+			       dma_addr_t phy_addr)
- {
- 	struct imx_i2c_dma *dma;
- 	struct dma_slave_config dma_sconfig;
-@@ -379,7 +379,7 @@ static void i2c_imx_dma_request(struct i
- 
- 	dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
- 	if (!dma)
--		return;
-+		return -ENOMEM;
- 
- 	dma->chan_tx = dma_request_chan(dev, "tx");
- 	if (IS_ERR(dma->chan_tx)) {
-@@ -424,7 +424,7 @@ static void i2c_imx_dma_request(struct i
- 	dev_info(dev, "using %s (tx) and %s (rx) for DMA transfers\n",
- 		dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
- 
--	return;
-+	return 0;
- 
- fail_rx:
- 	dma_release_channel(dma->chan_rx);
-@@ -432,6 +432,8 @@ fail_tx:
- 	dma_release_channel(dma->chan_tx);
- fail_al:
- 	devm_kfree(dev, dma);
-+
-+	return ret;
- }
- 
- static void i2c_imx_dma_callback(void *arg)
-@@ -1633,10 +1635,14 @@ static int i2c_imx_probe(struct platform
- 	dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
- 
- 	/* Init DMA config if supported */
--	i2c_imx_dma_request(i2c_imx, phy_addr);
-+	ret = i2c_imx_dma_request(i2c_imx, phy_addr);
-+	if (ret == -EPROBE_DEFER)
-+		goto i2c_adapter_remove;
- 
- 	return 0;   /* Return OK */
- 
-+i2c_adapter_remove:
-+	i2c_del_adapter(&i2c_imx->adapter);
- clk_notifier_unregister:
- 	clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb);
- 	free_irq(irq, i2c_imx);
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0001-ivshmem-net-virtual-network-device-for-Jailhouse.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0001-ivshmem-net-virtual-network-device-for-Jailhouse.patch
deleted file mode 100644
index ede28ba23e..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0001-ivshmem-net-virtual-network-device-for-Jailhouse.patch
+++ /dev/null
@@ -1,960 +0,0 @@
-From 7f48bab7c7b468961cf70efa1d86a75173e3987a Mon Sep 17 00:00:00 2001
-From: Mans Rullgard <mans@mansr.com>
-Date: Thu, 26 May 2016 16:04:02 +0100
-Subject: [PATCH] ivshmem-net: virtual network device for Jailhouse
-
-Work in progress.
-
-(cherry picked from commit ed818547b45e652db57d5966efe336ed646feb45)
----
- drivers/net/Kconfig       |   4 +
- drivers/net/Makefile      |   2 +
- drivers/net/ivshmem-net.c | 923 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 929 insertions(+)
- create mode 100644 drivers/net/ivshmem-net.c
-
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -571,4 +571,8 @@ config NET_FAILOVER
- 	  a VM with direct attached VF by failing over to the paravirtual
- 	  datapath when the VF is unplugged.
- 
-+config IVSHMEM_NET
-+	tristate "IVSHMEM virtual network device"
-+	depends on PCI
-+
- endif # NETDEVICES
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -80,3 +80,5 @@ thunderbolt-net-y += thunderbolt.o
- obj-$(CONFIG_THUNDERBOLT_NET) += thunderbolt-net.o
- obj-$(CONFIG_NETDEVSIM) += netdevsim/
- obj-$(CONFIG_NET_FAILOVER) += net_failover.o
-+
-+obj-$(CONFIG_IVSHMEM_NET) += ivshmem-net.o
---- /dev/null
-+++ b/drivers/net/ivshmem-net.c
-@@ -0,0 +1,923 @@
-+/*
-+ * Copyright 2016 Mans Rullgard <mans@mansr.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/pci.h>
-+#include <linux/io.h>
-+#include <linux/bitops.h>
-+#include <linux/interrupt.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/virtio_ring.h>
-+
-+#define DRV_NAME "ivshmem-net"
-+
-+#define JAILHOUSE_CFG_SHMEM_PTR	0x40
-+#define JAILHOUSE_CFG_SHMEM_SZ	0x48
-+
-+#define IVSHM_NET_STATE_RESET	0
-+#define IVSHM_NET_STATE_INIT	1
-+#define IVSHM_NET_STATE_READY	2
-+#define IVSHM_NET_STATE_RUN	3
-+
-+#define IVSHM_NET_MTU_MIN 256
-+#define IVSHM_NET_MTU_MAX 65535
-+#define IVSHM_NET_MTU_DEF 16384
-+
-+#define IVSHM_NET_FRAME_SIZE(s) ALIGN(18 + (s), SMP_CACHE_BYTES)
-+
-+#define IVSHM_NET_VQ_ALIGN 64
-+
-+struct ivshmem_regs {
-+	u32 imask;
-+	u32 istat;
-+	u32 ivpos;
-+	u32 doorbell;
-+	u32 lstate;
-+	u32 rstate;
-+};
-+
-+struct ivshm_net_queue {
-+	struct vring vr;
-+	u32 free_head;
-+	u32 num_free;
-+	u32 num_added;
-+	u16 last_avail_idx;
-+	u16 last_used_idx;
-+
-+	void *data;
-+	void *end;
-+	u32 size;
-+	u32 head;
-+	u32 tail;
-+};
-+
-+struct ivshm_net_stats {
-+	u32 interrupts;
-+	u32 tx_packets;
-+	u32 tx_notify;
-+	u32 tx_pause;
-+	u32 rx_packets;
-+	u32 rx_notify;
-+	u32 napi_poll;
-+	u32 napi_complete;
-+	u32 napi_poll_n[10];
-+};
-+
-+struct ivshm_net {
-+	struct ivshm_net_queue rx;
-+	struct ivshm_net_queue tx;
-+
-+	u32 vrsize;
-+	u32 qlen;
-+	u32 qsize;
-+
-+	spinlock_t tx_free_lock;
-+	spinlock_t tx_clean_lock;
-+
-+	struct napi_struct napi;
-+
-+	u32 lstate;
-+	u32 rstate;
-+
-+	struct workqueue_struct *state_wq;
-+	struct work_struct state_work;
-+
-+	struct ivshm_net_stats stats;
-+
-+	struct ivshmem_regs __iomem *ivshm_regs;
-+	void *shm;
-+	phys_addr_t shmaddr;
-+	resource_size_t shmlen;
-+	u32 peer_id;
-+
-+	struct pci_dev *pdev;
-+	struct msix_entry msix;
-+	bool using_msix;
-+};
-+
-+static void *ivshm_net_desc_data(struct ivshm_net *in,
-+				 struct ivshm_net_queue *q,
-+				 struct vring_desc *desc,
-+				 u32 *len)
-+{
-+	u64 addr = READ_ONCE(desc->addr);
-+	u32 dlen = READ_ONCE(desc->len);
-+	void *data;
-+
-+	if (addr < in->shmaddr || desc->addr > in->shmaddr + in->shmlen)
-+		return NULL;
-+
-+	data = in->shm + (addr - in->shmaddr);
-+
-+	if (data < q->data || data >= q->end)
-+		return NULL;
-+
-+	if (dlen > q->end - data)
-+		return NULL;
-+
-+	*len = dlen;
-+
-+	return data;
-+}
-+
-+static void ivshm_net_init_queue(struct ivshm_net *in,
-+				 struct ivshm_net_queue *q,
-+				 void *mem, unsigned int len)
-+{
-+	memset(q, 0, sizeof(*q));
-+
-+	vring_init(&q->vr, len, mem, IVSHM_NET_VQ_ALIGN);
-+	q->data = mem + in->vrsize;
-+	q->end = q->data + in->qsize;
-+	q->size = in->qsize;
-+}
-+
-+static void ivshm_net_init_queues(struct net_device *ndev)
-+{
-+	struct ivshm_net *in = netdev_priv(ndev);
-+	int ivpos = readl(&in->ivshm_regs->ivpos);
-+	void *tx;
-+	void *rx;
-+	int i;
-+
-+	tx = in->shm +  ivpos * in->shmlen / 2;
-+	rx = in->shm + !ivpos * in->shmlen / 2;
-+
-+	memset(tx, 0, in->shmlen / 2);
-+
-+	ivshm_net_init_queue(in, &in->rx, rx, in->qlen);
-+	ivshm_net_init_queue(in, &in->tx, tx, in->qlen);
-+
-+	swap(in->rx.vr.used, in->tx.vr.used);
-+
-+	in->tx.num_free = in->tx.vr.num;
-+
-+	for (i = 0; i < in->tx.vr.num - 1; i++)
-+		in->tx.vr.desc[i].next = i + 1;
-+}
-+
-+static int ivshm_net_calc_qsize(struct net_device *ndev)
-+{
-+	struct ivshm_net *in = netdev_priv(ndev);
-+	unsigned int vrsize;
-+	unsigned int qsize;
-+	unsigned int qlen;
-+
-+	for (qlen = 4096; qlen > 32; qlen >>= 1) {
-+		vrsize = vring_size(qlen, IVSHM_NET_VQ_ALIGN);
-+		vrsize = ALIGN(vrsize, IVSHM_NET_VQ_ALIGN);
-+		if (vrsize < in->shmlen / 16)
-+			break;
-+	}
-+
-+	if (vrsize > in->shmlen / 2)
-+		return -EINVAL;
-+
-+	qsize = in->shmlen / 2 - vrsize;
-+
-+	if (qsize < 4 * IVSHM_NET_MTU_MIN)
-+		return -EINVAL;
-+
-+	in->vrsize = vrsize;
-+	in->qlen = qlen;
-+	in->qsize = qsize;
-+
-+	return 0;
-+}
-+
-+static void ivshm_net_notify_tx(struct ivshm_net *in, unsigned int num)
-+{
-+	u16 evt, old, new;
-+
-+	virt_mb();
-+
-+	evt = READ_ONCE(vring_avail_event(&in->tx.vr));
-+	old = in->tx.last_avail_idx - num;
-+	new = in->tx.last_avail_idx;
-+
-+	if (vring_need_event(evt, new, old)) {
-+		writel(in->peer_id << 16, &in->ivshm_regs->doorbell);
-+		in->stats.tx_notify++;
-+	}
-+}
-+
-+static void ivshm_net_enable_rx_irq(struct ivshm_net *in)
-+{
-+	vring_avail_event(&in->rx.vr) = in->rx.last_avail_idx;
-+	virt_wmb();
-+}
-+
-+static void ivshm_net_notify_rx(struct ivshm_net *in, unsigned int num)
-+{
-+	u16 evt, old, new;
-+
-+	virt_mb();
-+
-+	evt = vring_used_event(&in->rx.vr);
-+	old = in->rx.last_used_idx - num;
-+	new = in->rx.last_used_idx;
-+
-+	if (vring_need_event(evt, new, old)) {
-+		writel(in->peer_id << 16, &in->ivshm_regs->doorbell);
-+		in->stats.rx_notify++;
-+	}
-+}
-+
-+static void ivshm_net_enable_tx_irq(struct ivshm_net *in)
-+{
-+	vring_used_event(&in->tx.vr) = in->tx.last_used_idx;
-+	virt_wmb();
-+}
-+
-+static bool ivshm_net_rx_avail(struct ivshm_net *in)
-+{
-+	virt_mb();
-+	return READ_ONCE(in->rx.vr.avail->idx) != in->rx.last_avail_idx;
-+}
-+
-+static size_t ivshm_net_tx_space(struct ivshm_net *in)
-+{
-+	struct ivshm_net_queue *tx = &in->tx;
-+	u32 tail = tx->tail;
-+	u32 head = tx->head;
-+	u32 space;
-+
-+	if (head < tail)
-+		space = tail - head;
-+	else
-+		space = max(tx->size - head, tail);
-+
-+	return space;
-+}
-+
-+static bool ivshm_net_tx_ok(struct ivshm_net *in, unsigned int mtu)
-+{
-+	return in->tx.num_free >= 2 &&
-+		ivshm_net_tx_space(in) >= 2 * IVSHM_NET_FRAME_SIZE(mtu);
-+}
-+
-+static u32 ivshm_net_tx_advance(struct ivshm_net_queue *q, u32 *pos, u32 len)
-+{
-+	u32 p = *pos;
-+
-+	len = IVSHM_NET_FRAME_SIZE(len);
-+
-+	if (q->size - p < len)
-+		p = 0;
-+	*pos = p + len;
-+
-+	return p;
-+}
-+
-+static int ivshm_net_tx_frame(struct net_device *ndev, struct sk_buff *skb)
-+{
-+	struct ivshm_net *in = netdev_priv(ndev);
-+	struct ivshm_net_queue *tx = &in->tx;
-+	struct vring *vr = &tx->vr;
-+	struct vring_desc *desc;
-+	unsigned int desc_idx;
-+	unsigned int avail;
-+	u32 head;
-+	void *buf;
-+
-+	BUG_ON(tx->num_free < 1);
-+
-+	spin_lock(&in->tx_free_lock);
-+	desc_idx = tx->free_head;
-+	desc = &vr->desc[desc_idx];
-+	tx->free_head = desc->next;
-+	tx->num_free--;
-+	spin_unlock(&in->tx_free_lock);
-+
-+	head = ivshm_net_tx_advance(tx, &tx->head, skb->len);
-+
-+	buf = tx->data + head;
-+	skb_copy_and_csum_dev(skb, buf);
-+
-+	desc->addr = in->shmaddr + (buf - in->shm);
-+	desc->len = skb->len;
-+
-+	avail = tx->last_avail_idx++ & (vr->num - 1);
-+	vr->avail->ring[avail] = desc_idx;
-+	tx->num_added++;
-+
-+	if (!skb->xmit_more) {
-+		virt_store_release(&vr->avail->idx, tx->last_avail_idx);
-+		ivshm_net_notify_tx(in, tx->num_added);
-+		tx->num_added = 0;
-+	}
-+
-+	return 0;
-+}
-+
-+static void ivshm_net_tx_clean(struct net_device *ndev)
-+{
-+	struct ivshm_net *in = netdev_priv(ndev);
-+	struct ivshm_net_queue *tx = &in->tx;
-+	struct vring *vr = &tx->vr;
-+	struct vring_desc *desc;
-+	struct vring_desc *fdesc;
-+	unsigned int used;
-+	unsigned int num;
-+	u16 used_idx;
-+	u16 last;
-+	u32 fhead;
-+
-+	if (!spin_trylock(&in->tx_clean_lock))
-+		return;
-+
-+	used_idx = virt_load_acquire(&vr->used->idx);
-+	last = tx->last_used_idx;
-+
-+	fdesc = NULL;
-+	num = 0;
-+
-+	while (last != used_idx) {
-+		void *data;
-+		u32 len;
-+		u32 tail;
-+
-+		used = vr->used->ring[last & (vr->num - 1)].id;
-+		if (used >= vr->num) {
-+			netdev_err(ndev, "invalid tx used %d\n", used);
-+			break;
-+		}
-+
-+		desc = &vr->desc[used];
-+
-+		data = ivshm_net_desc_data(in, &in->tx, desc, &len);
-+		if (!data) {
-+			netdev_err(ndev, "bad tx descriptor\n");
-+			break;
-+		}
-+
-+		tail = ivshm_net_tx_advance(tx, &tx->tail, len);
-+		if (data != tx->data + tail) {
-+			netdev_err(ndev, "bad tx descriptor\n");
-+			break;
-+		}
-+
-+		if (!num)
-+			fdesc = desc;
-+		else
-+			desc->next = fhead;
-+
-+		fhead = used;
-+		last++;
-+		num++;
-+	}
-+
-+	tx->last_used_idx = last;
-+
-+	spin_unlock(&in->tx_clean_lock);
-+
-+	if (num) {
-+		spin_lock(&in->tx_free_lock);
-+		fdesc->next = tx->free_head;
-+		tx->free_head = fhead;
-+		tx->num_free += num;
-+		BUG_ON(tx->num_free > vr->num);
-+		spin_unlock(&in->tx_free_lock);
-+	}
-+}
-+
-+static struct vring_desc *ivshm_net_rx_desc(struct net_device *ndev)
-+{
-+	struct ivshm_net *in = netdev_priv(ndev);
-+	struct ivshm_net_queue *rx = &in->rx;
-+	struct vring *vr = &rx->vr;
-+	unsigned int avail;
-+	u16 avail_idx;
-+
-+	avail_idx = virt_load_acquire(&vr->avail->idx);
-+
-+	if (avail_idx == rx->last_avail_idx)
-+		return NULL;
-+
-+	avail = vr->avail->ring[rx->last_avail_idx++ & (vr->num - 1)];
-+	if (avail >= vr->num) {
-+		netdev_err(ndev, "invalid rx avail %d\n", avail);
-+		return NULL;
-+	}
-+
-+	return &vr->desc[avail];
-+}
-+
-+static void ivshm_net_rx_finish(struct ivshm_net *in, struct vring_desc *desc)
-+{
-+	struct ivshm_net_queue *rx = &in->rx;
-+	struct vring *vr = &rx->vr;
-+	unsigned int desc_id = desc - vr->desc;
-+	unsigned int used;
-+
-+	used = rx->last_used_idx++ & (vr->num - 1);
-+	vr->used->ring[used].id = desc_id;
-+
-+	virt_store_release(&vr->used->idx, rx->last_used_idx);
-+}
-+
-+static int ivshm_net_poll(struct napi_struct *napi, int budget)
-+{
-+	struct net_device *ndev = napi->dev;
-+	struct ivshm_net *in = container_of(napi, struct ivshm_net, napi);
-+	int received = 0;
-+
-+	in->stats.napi_poll++;
-+
-+	ivshm_net_tx_clean(ndev);
-+
-+	while (received < budget) {
-+		struct vring_desc *desc;
-+		struct sk_buff *skb;
-+		void *data;
-+		u32 len;
-+
-+		desc = ivshm_net_rx_desc(ndev);
-+		if (!desc)
-+			break;
-+
-+		data = ivshm_net_desc_data(in, &in->rx, desc, &len);
-+		if (!data) {
-+			netdev_err(ndev, "bad rx descriptor\n");
-+			break;
-+		}
-+
-+		skb = napi_alloc_skb(napi, len);
-+
-+		if (skb) {
-+			memcpy(skb_put(skb, len), data, len);
-+			skb->protocol = eth_type_trans(skb, ndev);
-+			napi_gro_receive(napi, skb);
-+		}
-+
-+		ndev->stats.rx_packets++;
-+		ndev->stats.rx_bytes += len;
-+
-+		ivshm_net_rx_finish(in, desc);
-+		received++;
-+	}
-+
-+	if (received < budget) {
-+		in->stats.napi_complete++;
-+		napi_complete_done(napi, received);
-+		ivshm_net_enable_rx_irq(in);
-+		if (ivshm_net_rx_avail(in))
-+			napi_schedule(napi);
-+	}
-+
-+	if (received)
-+		ivshm_net_notify_rx(in, received);
-+
-+	in->stats.rx_packets += received;
-+	in->stats.napi_poll_n[received ? 1 + min(ilog2(received), 8) : 0]++;
-+
-+	if (ivshm_net_tx_ok(in, ndev->mtu))
-+		netif_wake_queue(ndev);
-+
-+	return received;
-+}
-+
-+static netdev_tx_t ivshm_net_xmit(struct sk_buff *skb, struct net_device *ndev)
-+{
-+	struct ivshm_net *in = netdev_priv(ndev);
-+
-+	ivshm_net_tx_clean(ndev);
-+
-+	if (!ivshm_net_tx_ok(in, ndev->mtu)) {
-+		ivshm_net_enable_tx_irq(in);
-+		netif_stop_queue(ndev);
-+		skb->xmit_more = 0;
-+		in->stats.tx_pause++;
-+	}
-+
-+	ivshm_net_tx_frame(ndev, skb);
-+
-+	in->stats.tx_packets++;
-+	ndev->stats.tx_packets++;
-+	ndev->stats.tx_bytes += skb->len;
-+
-+	dev_consume_skb_any(skb);
-+
-+	return NETDEV_TX_OK;
-+}
-+
-+static void ivshm_net_set_state(struct ivshm_net *in, u32 state)
-+{
-+	virt_wmb();
-+	WRITE_ONCE(in->lstate, state);
-+	writel(state, &in->ivshm_regs->lstate);
-+}
-+
-+static void ivshm_net_run(struct net_device *ndev)
-+{
-+	struct ivshm_net *in = netdev_priv(ndev);
-+
-+	netif_start_queue(ndev);
-+	napi_enable(&in->napi);
-+	napi_schedule(&in->napi);
-+	ivshm_net_set_state(in, IVSHM_NET_STATE_RUN);
-+}
-+
-+static void ivshm_net_state_change(struct work_struct *work)
-+{
-+	struct ivshm_net *in = container_of(work, struct ivshm_net, state_work);
-+	struct net_device *ndev = in->napi.dev;
-+	u32 rstate = readl(&in->ivshm_regs->rstate);
-+
-+
-+	switch (in->lstate) {
-+	case IVSHM_NET_STATE_RESET:
-+		if (rstate < IVSHM_NET_STATE_READY)
-+			ivshm_net_set_state(in, IVSHM_NET_STATE_INIT);
-+		break;
-+
-+	case IVSHM_NET_STATE_INIT:
-+		if (rstate > IVSHM_NET_STATE_RESET) {
-+			ivshm_net_init_queues(ndev);
-+			ivshm_net_set_state(in, IVSHM_NET_STATE_READY);
-+
-+			rtnl_lock();
-+			call_netdevice_notifiers(NETDEV_CHANGEADDR, ndev);
-+			rtnl_unlock();
-+		}
-+		break;
-+
-+	case IVSHM_NET_STATE_READY:
-+		if (rstate >= IVSHM_NET_STATE_READY) {
-+			netif_carrier_on(ndev);
-+			if (ndev->flags & IFF_UP)
-+				ivshm_net_run(ndev);
-+		} else {
-+			netif_carrier_off(ndev);
-+			ivshm_net_set_state(in, IVSHM_NET_STATE_RESET);
-+		}
-+		break;
-+
-+	case IVSHM_NET_STATE_RUN:
-+		if (rstate < IVSHM_NET_STATE_READY) {
-+			netif_stop_queue(ndev);
-+			napi_disable(&in->napi);
-+			netif_carrier_off(ndev);
-+			ivshm_net_set_state(in, IVSHM_NET_STATE_RESET);
-+		}
-+		break;
-+	}
-+
-+	virt_wmb();
-+	WRITE_ONCE(in->rstate, rstate);
-+}
-+
-+static bool ivshm_net_check_state(struct net_device *ndev)
-+{
-+	struct ivshm_net *in = netdev_priv(ndev);
-+	u32 rstate = readl(&in->ivshm_regs->rstate);
-+
-+	if (rstate != READ_ONCE(in->rstate) ||
-+	    in->lstate != IVSHM_NET_STATE_RUN) {
-+		queue_work(in->state_wq, &in->state_work);
-+		return false;
-+	}
-+
-+	return true;
-+}
-+
-+static irqreturn_t ivshm_net_int(int irq, void *data)
-+{
-+	struct net_device *ndev = data;
-+	struct ivshm_net *in = netdev_priv(ndev);
-+
-+	in->stats.interrupts++;
-+
-+	ivshm_net_check_state(ndev);
-+	napi_schedule_irqoff(&in->napi);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int ivshm_net_open(struct net_device *ndev)
-+{
-+	struct ivshm_net *in = netdev_priv(ndev);
-+
-+	netdev_reset_queue(ndev);
-+	ndev->operstate = IF_OPER_UP;
-+
-+	if (in->lstate == IVSHM_NET_STATE_READY)
-+		ivshm_net_run(ndev);
-+
-+	return 0;
-+}
-+
-+static int ivshm_net_stop(struct net_device *ndev)
-+{
-+	struct ivshm_net *in = netdev_priv(ndev);
-+
-+	ndev->operstate = IF_OPER_DOWN;
-+
-+	if (in->lstate == IVSHM_NET_STATE_RUN) {
-+		napi_disable(&in->napi);
-+		netif_stop_queue(ndev);
-+		ivshm_net_set_state(in, IVSHM_NET_STATE_READY);
-+	}
-+
-+	return 0;
-+}
-+
-+static int ivshm_net_change_mtu(struct net_device *ndev, int mtu)
-+{
-+	struct ivshm_net *in = netdev_priv(ndev);
-+	struct ivshm_net_queue *tx = &in->tx;
-+
-+	if (mtu < IVSHM_NET_MTU_MIN || mtu > IVSHM_NET_MTU_MAX)
-+		return -EINVAL;
-+
-+	if (in->tx.size / mtu < 4)
-+		return -EINVAL;
-+
-+	if (ivshm_net_tx_space(in) < 2 * IVSHM_NET_FRAME_SIZE(mtu))
-+		return -EBUSY;
-+
-+	if (in->tx.size - tx->head < IVSHM_NET_FRAME_SIZE(mtu) &&
-+	    tx->head < tx->tail)
-+		return -EBUSY;
-+
-+	netif_tx_lock_bh(ndev);
-+	if (in->tx.size - tx->head < IVSHM_NET_FRAME_SIZE(mtu))
-+		tx->head = 0;
-+	netif_tx_unlock_bh(ndev);
-+
-+	ndev->mtu = mtu;
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void ivshm_net_poll_controller(struct net_device *ndev)
-+{
-+	struct ivshm_net *in = netdev_priv(ndev);
-+
-+	napi_schedule(&in->napi);
-+}
-+#endif
-+
-+static const struct net_device_ops ivshm_net_ops = {
-+	.ndo_open	= ivshm_net_open,
-+	.ndo_stop	= ivshm_net_stop,
-+	.ndo_start_xmit	= ivshm_net_xmit,
-+	.ndo_change_mtu	= ivshm_net_change_mtu,
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+	.ndo_poll_controller = ivshm_net_poll_controller,
-+#endif
-+};
-+
-+static const char ivshm_net_stats[][ETH_GSTRING_LEN] = {
-+	"interrupts",
-+	"tx_packets",
-+	"tx_notify",
-+	"tx_pause",
-+	"rx_packets",
-+	"rx_notify",
-+	"napi_poll",
-+	"napi_complete",
-+	"napi_poll_0",
-+	"napi_poll_1",
-+	"napi_poll_2",
-+	"napi_poll_4",
-+	"napi_poll_8",
-+	"napi_poll_16",
-+	"napi_poll_32",
-+	"napi_poll_64",
-+	"napi_poll_128",
-+	"napi_poll_256",
-+};
-+
-+#define NUM_STATS ARRAY_SIZE(ivshm_net_stats)
-+
-+static int ivshm_net_get_sset_count(struct net_device *ndev, int sset)
-+{
-+	if (sset == ETH_SS_STATS)
-+		return NUM_STATS;
-+
-+	return -EOPNOTSUPP;
-+}
-+
-+static void ivshm_net_get_strings(struct net_device *ndev, u32 sset, u8 *buf)
-+{
-+	if (sset == ETH_SS_STATS)
-+		memcpy(buf, &ivshm_net_stats, sizeof(ivshm_net_stats));
-+}
-+
-+static void ivshm_net_get_ethtool_stats(struct net_device *ndev,
-+					struct ethtool_stats *estats, u64 *st)
-+{
-+	struct ivshm_net *in = netdev_priv(ndev);
-+	unsigned int n = 0;
-+	unsigned int i;
-+
-+	st[n++] = in->stats.interrupts;
-+	st[n++] = in->stats.tx_packets;
-+	st[n++] = in->stats.tx_notify;
-+	st[n++] = in->stats.tx_pause;
-+	st[n++] = in->stats.rx_packets;
-+	st[n++] = in->stats.rx_notify;
-+	st[n++] = in->stats.napi_poll;
-+	st[n++] = in->stats.napi_complete;
-+
-+	for (i = 0; i < ARRAY_SIZE(in->stats.napi_poll_n); i++)
-+		st[n++] = in->stats.napi_poll_n[i];
-+
-+	memset(&in->stats, 0, sizeof(in->stats));
-+}
-+
-+static const struct ethtool_ops ivshm_net_ethtool_ops = {
-+	.get_sset_count		= ivshm_net_get_sset_count,
-+	.get_strings		= ivshm_net_get_strings,
-+	.get_ethtool_stats	= ivshm_net_get_ethtool_stats,
-+};
-+
-+static int ivshm_net_probe(struct pci_dev *pdev,
-+			   const struct pci_device_id *id)
-+{
-+	struct net_device *ndev;
-+	struct ivshm_net *in;
-+	struct ivshmem_regs __iomem *regs;
-+	resource_size_t shmaddr;
-+	resource_size_t shmlen;
-+	int interrupt;
-+	void *shm;
-+	u32 ivpos;
-+	int err;
-+
-+	err = pcim_enable_device(pdev);
-+	if (err) {
-+		dev_err(&pdev->dev, "pci_enable_device: %d\n", err);
-+		return err;
-+	}
-+
-+	err = pcim_iomap_regions(pdev, BIT(0), DRV_NAME);
-+	if (err) {
-+		dev_err(&pdev->dev, "pcim_iomap_regions: %d\n", err);
-+		return err;
-+	}
-+
-+	regs = pcim_iomap_table(pdev)[0];
-+
-+	shmlen = pci_resource_len(pdev, 2);
-+
-+	if (shmlen) {
-+		shmaddr = pci_resource_start(pdev, 2);
-+	} else {
-+		union { u64 v; u32 hl[2]; } val;
-+
-+		pci_read_config_dword(pdev, JAILHOUSE_CFG_SHMEM_PTR,
-+				      &val.hl[0]);
-+		pci_read_config_dword(pdev, JAILHOUSE_CFG_SHMEM_PTR + 4,
-+				      &val.hl[1]);
-+		shmaddr = val.v;
-+
-+		pci_read_config_dword(pdev, JAILHOUSE_CFG_SHMEM_SZ,
-+				      &val.hl[0]);
-+		pci_read_config_dword(pdev, JAILHOUSE_CFG_SHMEM_SZ + 4,
-+				      &val.hl[1]);
-+		shmlen = val.v;
-+	}
-+
-+
-+	if (!devm_request_mem_region(&pdev->dev, shmaddr, shmlen, DRV_NAME))
-+		return -EBUSY;
-+
-+	shm = devm_memremap(&pdev->dev, shmaddr, shmlen, MEMREMAP_WC);
-+	if (!shm)
-+		return -ENOMEM;
-+
-+	ivpos = readl(&regs->ivpos);
-+	if (ivpos > 1) {
-+		dev_err(&pdev->dev, "invalid IVPosition %d\n", ivpos);
-+		return -EINVAL;
-+	}
-+
-+	dev_info(&pdev->dev, "shared memory size %pa\n", &shmlen);
-+
-+	ndev = alloc_etherdev(sizeof(*in));
-+	if (!ndev)
-+		return -ENOMEM;
-+
-+	pci_set_drvdata(pdev, ndev);
-+	SET_NETDEV_DEV(ndev, &pdev->dev);
-+
-+	in = netdev_priv(ndev);
-+	in->ivshm_regs = regs;
-+	in->shm = shm;
-+	in->shmaddr = shmaddr;
-+	in->shmlen = shmlen;
-+	in->peer_id = !ivpos;
-+	in->pdev = pdev;
-+	spin_lock_init(&in->tx_free_lock);
-+	spin_lock_init(&in->tx_clean_lock);
-+
-+	err = ivshm_net_calc_qsize(ndev);
-+	if (err)
-+		goto err_free;
-+
-+	in->state_wq = alloc_ordered_workqueue(DRV_NAME, 0);
-+	if (!in->state_wq)
-+		goto err_free;
-+
-+	INIT_WORK(&in->state_work, ivshm_net_state_change);
-+
-+	eth_random_addr(ndev->dev_addr);
-+	ndev->netdev_ops = &ivshm_net_ops;
-+	ndev->ethtool_ops = &ivshm_net_ethtool_ops;
-+	ndev->mtu = min_t(u32, IVSHM_NET_MTU_DEF, in->qsize / 16);
-+	ndev->hw_features = NETIF_F_HW_CSUM | NETIF_F_SG;
-+	ndev->features = ndev->hw_features;
-+
-+	netif_carrier_off(ndev);
-+	netif_napi_add(ndev, &in->napi, ivshm_net_poll, NAPI_POLL_WEIGHT);
-+
-+	err = register_netdev(ndev);
-+	if (err)
-+		goto err_wq;
-+
-+	err = pci_enable_msix(pdev, &in->msix, 1);
-+	if (!err) {
-+		interrupt = in->msix.vector;
-+		in->using_msix = true;
-+	} else {
-+		interrupt = pdev->irq;
-+		in->using_msix = false;
-+	}
-+
-+	err = request_irq(interrupt, ivshm_net_int, 0, DRV_NAME, ndev);
-+	if (err)
-+		goto err_int;
-+
-+	pci_set_master(pdev);
-+
-+	writel(IVSHM_NET_STATE_RESET, &in->ivshm_regs->lstate);
-+
-+	return 0;
-+
-+err_int:
-+	if (in->using_msix)
-+		pci_disable_msix(pdev);
-+	unregister_netdev(ndev);
-+err_wq:
-+	destroy_workqueue(in->state_wq);
-+err_free:
-+	free_netdev(ndev);
-+
-+	return err;
-+}
-+
-+static void ivshm_net_remove(struct pci_dev *pdev)
-+{
-+	struct net_device *ndev = pci_get_drvdata(pdev);
-+	struct ivshm_net *in = netdev_priv(ndev);
-+
-+	if (in->using_msix)  {
-+		free_irq(in->msix.vector, ndev);
-+		pci_disable_msix(pdev);
-+	} else {
-+		free_irq(pdev->irq, ndev);
-+	}
-+
-+	unregister_netdev(ndev);
-+	cancel_work_sync(&in->state_work);
-+	destroy_workqueue(in->state_wq);
-+	free_netdev(ndev);
-+}
-+
-+static const struct pci_device_id ivshm_net_id_table[] = {
-+	{ PCI_DEVICE(PCI_VENDOR_ID_REDHAT_QUMRANET, 0x1110),
-+		(PCI_CLASS_OTHERS << 16) | (0x01 << 8), 0xffff00 },
-+	{ 0 }
-+};
-+MODULE_DEVICE_TABLE(pci, ivshm_net_id_table);
-+
-+static struct pci_driver ivshm_net_driver = {
-+	.name		= DRV_NAME,
-+	.id_table	= ivshm_net_id_table,
-+	.probe		= ivshm_net_probe,
-+	.remove		= ivshm_net_remove,
-+};
-+module_pci_driver(ivshm_net_driver);
-+
-+MODULE_AUTHOR("Mans Rullgard <mans@mansr.com>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0002-ivshmem-net-Map-shmem-region-as-RAM.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0002-ivshmem-net-Map-shmem-region-as-RAM.patch
deleted file mode 100644
index 8a3bcd6502..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0002-ivshmem-net-Map-shmem-region-as-RAM.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 4677dd55d55832dab1e4f41fe9a7fabe8bb95197 Mon Sep 17 00:00:00 2001
-From: Jan Kiszka <jan.kiszka@siemens.com>
-Date: Thu, 24 Nov 2016 08:27:45 +0100
-Subject: [PATCH] ivshmem-net: Map shmem region as RAM
-
-No need for special caching, simply map the shared memory region like
-RAM, thus write-back. This gives us another order of magnitude in
-throughput.
-
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit af59c6541a65622cab498851e01653dd378cd9f8)
----
- drivers/net/ivshmem-net.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -802,7 +802,7 @@ static int ivshm_net_probe(struct pci_de
- 	if (!devm_request_mem_region(&pdev->dev, shmaddr, shmlen, DRV_NAME))
- 		return -EBUSY;
- 
--	shm = devm_memremap(&pdev->dev, shmaddr, shmlen, MEMREMAP_WC);
-+	shm = devm_memremap(&pdev->dev, shmaddr, shmlen, MEMREMAP_WB);
- 	if (!shm)
- 		return -ENOMEM;
- 
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0003-ivshmem-net-fix-race-in-state-machine.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0003-ivshmem-net-fix-race-in-state-machine.patch
deleted file mode 100644
index ae6f839011..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0003-ivshmem-net-fix-race-in-state-machine.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From 0af5d7d021bb899d9c3880415267e178a20fb7a9 Mon Sep 17 00:00:00 2001
-From: Mans Rullgard <mans@mansr.com>
-Date: Thu, 24 Nov 2016 18:46:41 +0000
-Subject: [PATCH] ivshmem-net: fix race in state machine
-
-(cherry picked from commit 5d663baed6a89d09bae4446f6509f9957c780bc7)
----
- drivers/net/ivshmem-net.c | 60 ++++++++++++++++++++++++-----------------------
- 1 file changed, 31 insertions(+), 29 deletions(-)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -36,6 +36,8 @@
- #define IVSHM_NET_STATE_READY	2
- #define IVSHM_NET_STATE_RUN	3
- 
-+#define IVSHM_NET_FLAG_RUN	0
-+
- #define IVSHM_NET_MTU_MIN 256
- #define IVSHM_NET_MTU_MAX 65535
- #define IVSHM_NET_MTU_DEF 16384
-@@ -96,6 +98,8 @@ struct ivshm_net {
- 	u32 lstate;
- 	u32 rstate;
- 
-+	unsigned long flags;
-+
- 	struct workqueue_struct *state_wq;
- 	struct work_struct state_work;
- 
-@@ -529,12 +533,32 @@ static void ivshm_net_run(struct net_dev
- {
- 	struct ivshm_net *in = netdev_priv(ndev);
- 
-+	if (in->lstate < IVSHM_NET_STATE_READY)
-+		return;
-+
-+	if (!netif_running(ndev))
-+		return;
-+
-+	if (test_and_set_bit(IVSHM_NET_FLAG_RUN, &in->flags))
-+		return;
-+
- 	netif_start_queue(ndev);
- 	napi_enable(&in->napi);
- 	napi_schedule(&in->napi);
- 	ivshm_net_set_state(in, IVSHM_NET_STATE_RUN);
- }
- 
-+static void ivshm_net_do_stop(struct net_device *ndev)
-+{
-+	struct ivshm_net *in = netdev_priv(ndev);
-+
-+	if (!test_and_clear_bit(IVSHM_NET_FLAG_RUN, &in->flags))
-+		return;
-+
-+	netif_stop_queue(ndev);
-+	napi_disable(&in->napi);
-+}
-+
- static void ivshm_net_state_change(struct work_struct *work)
- {
- 	struct ivshm_net *in = container_of(work, struct ivshm_net, state_work);
-@@ -560,21 +584,13 @@ static void ivshm_net_state_change(struc
- 		break;
- 
- 	case IVSHM_NET_STATE_READY:
-+	case IVSHM_NET_STATE_RUN:
- 		if (rstate >= IVSHM_NET_STATE_READY) {
- 			netif_carrier_on(ndev);
--			if (ndev->flags & IFF_UP)
--				ivshm_net_run(ndev);
-+			ivshm_net_run(ndev);
- 		} else {
- 			netif_carrier_off(ndev);
--			ivshm_net_set_state(in, IVSHM_NET_STATE_RESET);
--		}
--		break;
--
--	case IVSHM_NET_STATE_RUN:
--		if (rstate < IVSHM_NET_STATE_READY) {
--			netif_stop_queue(ndev);
--			napi_disable(&in->napi);
--			netif_carrier_off(ndev);
-+			ivshm_net_do_stop(ndev);
- 			ivshm_net_set_state(in, IVSHM_NET_STATE_RESET);
- 		}
- 		break;
-@@ -584,18 +600,13 @@ static void ivshm_net_state_change(struc
- 	WRITE_ONCE(in->rstate, rstate);
- }
- 
--static bool ivshm_net_check_state(struct net_device *ndev)
-+static void ivshm_net_check_state(struct net_device *ndev)
- {
- 	struct ivshm_net *in = netdev_priv(ndev);
- 	u32 rstate = readl(&in->ivshm_regs->rstate);
- 
--	if (rstate != READ_ONCE(in->rstate) ||
--	    in->lstate != IVSHM_NET_STATE_RUN) {
-+	if (rstate != in->rstate || !test_bit(IVSHM_NET_FLAG_RUN, &in->flags))
- 		queue_work(in->state_wq, &in->state_work);
--		return false;
--	}
--
--	return true;
- }
- 
- static irqreturn_t ivshm_net_int(int irq, void *data)
-@@ -617,24 +628,15 @@ static int ivshm_net_open(struct net_dev
- 
- 	netdev_reset_queue(ndev);
- 	ndev->operstate = IF_OPER_UP;
--
--	if (in->lstate == IVSHM_NET_STATE_READY)
--		ivshm_net_run(ndev);
-+	ivshm_net_run(ndev);
- 
- 	return 0;
- }
- 
- static int ivshm_net_stop(struct net_device *ndev)
- {
--	struct ivshm_net *in = netdev_priv(ndev);
--
- 	ndev->operstate = IF_OPER_DOWN;
--
--	if (in->lstate == IVSHM_NET_STATE_RUN) {
--		napi_disable(&in->napi);
--		netif_stop_queue(ndev);
--		ivshm_net_set_state(in, IVSHM_NET_STATE_READY);
--	}
-+	ivshm_net_do_stop(ndev);
- 
- 	return 0;
- }
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0004-ivshmem-net-Remove-unused-variable.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0004-ivshmem-net-Remove-unused-variable.patch
deleted file mode 100644
index 348c71f281..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0004-ivshmem-net-Remove-unused-variable.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 4bf063d8655698036c42ec34d6cc840d7bdc1a84 Mon Sep 17 00:00:00 2001
-From: Jan Kiszka <jan.kiszka@siemens.com>
-Date: Fri, 25 Nov 2016 17:31:51 +0100
-Subject: [PATCH] ivshmem-net: Remove unused variable
-
-Became unused by previous change.
-
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit 3ea4b31deba3424784f0105c20dc90419e950e2c)
----
- drivers/net/ivshmem-net.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -624,8 +624,6 @@ static irqreturn_t ivshm_net_int(int irq
- 
- static int ivshm_net_open(struct net_device *ndev)
- {
--	struct ivshm_net *in = netdev_priv(ndev);
--
- 	netdev_reset_queue(ndev);
- 	ndev->operstate = IF_OPER_UP;
- 	ivshm_net_run(ndev);
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0005-ivshmem-net-Enable-INTx.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0005-ivshmem-net-Enable-INTx.patch
deleted file mode 100644
index d87256757f..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0005-ivshmem-net-Enable-INTx.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 3734c2c9ac0fd763deceb686efc93b293acca4c6 Mon Sep 17 00:00:00 2001
-From: Jan Kiszka <jan.kiszka@siemens.com>
-Date: Sun, 27 Nov 2016 15:15:51 +0100
-Subject: [PATCH] ivshmem-net: Enable INTx
-
-Activate INTx notification when it has to be used instead of MSI-X,
-disable it after use.
-
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit 8790717bdca6ea58f18baac1749ac347b23b7263)
----
- drivers/net/ivshmem-net.c | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -31,6 +31,8 @@
- #define JAILHOUSE_CFG_SHMEM_PTR	0x40
- #define JAILHOUSE_CFG_SHMEM_SZ	0x48
- 
-+#define IVSHMEM_INTX_ENABLE	0x1
-+
- #define IVSHM_NET_STATE_RESET	0
- #define IVSHM_NET_STATE_INIT	1
- #define IVSHM_NET_STATE_READY	2
-@@ -47,7 +49,7 @@
- #define IVSHM_NET_VQ_ALIGN 64
- 
- struct ivshmem_regs {
--	u32 imask;
-+	u32 intxctrl;
- 	u32 istat;
- 	u32 ivpos;
- 	u32 doorbell;
-@@ -869,6 +871,8 @@ static int ivshm_net_probe(struct pci_de
- 		goto err_int;
- 
- 	pci_set_master(pdev);
-+	if (!in->using_msix)
-+		writel(IVSHMEM_INTX_ENABLE, &in->ivshm_regs->intxctrl);
- 
- 	writel(IVSHM_NET_STATE_RESET, &in->ivshm_regs->lstate);
- 
-@@ -895,6 +899,7 @@ static void ivshm_net_remove(struct pci_
- 		free_irq(in->msix.vector, ndev);
- 		pci_disable_msix(pdev);
- 	} else {
-+		writel(0, &in->ivshm_regs->intxctrl);
- 		free_irq(pdev->irq, ndev);
- 	}
- 
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0006-ivshmem-net-Improve-identification-of-resources.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0006-ivshmem-net-Improve-identification-of-resources.patch
deleted file mode 100644
index 8975a96e18..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0006-ivshmem-net-Improve-identification-of-resources.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 40985902afd8f4eb0bd7aa4238c7d458282af948 Mon Sep 17 00:00:00 2001
-From: Jan Kiszka <jan.kiszka@siemens.com>
-Date: Wed, 21 Dec 2016 08:20:18 +0100
-Subject: [PATCH] ivshmem-net: Improve identification of resources
-
-Pass a device name consisting of driver name and PCI ID to request_irq
-and alloc_ordered_workqueue. This helps correlating resources with
-devices in case there are multiple of them.
-
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit 43e2ff78b89cbdfaecba54601d85f3d40349a9b5)
----
- drivers/net/ivshmem-net.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -762,6 +762,7 @@ static int ivshm_net_probe(struct pci_de
- 	resource_size_t shmaddr;
- 	resource_size_t shmlen;
- 	int interrupt;
-+	char *device_name;
- 	void *shm;
- 	u32 ivpos;
- 	int err;
-@@ -814,7 +815,10 @@ static int ivshm_net_probe(struct pci_de
- 		return -EINVAL;
- 	}
- 
--	dev_info(&pdev->dev, "shared memory size %pa\n", &shmlen);
-+	device_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s[%s]", DRV_NAME,
-+				     dev_name(&pdev->dev));
-+	if (!device_name)
-+		return -ENOMEM;
- 
- 	ndev = alloc_etherdev(sizeof(*in));
- 	if (!ndev)
-@@ -837,7 +841,7 @@ static int ivshm_net_probe(struct pci_de
- 	if (err)
- 		goto err_free;
- 
--	in->state_wq = alloc_ordered_workqueue(DRV_NAME, 0);
-+	in->state_wq = alloc_ordered_workqueue(device_name, 0);
- 	if (!in->state_wq)
- 		goto err_free;
- 
-@@ -866,7 +870,7 @@ static int ivshm_net_probe(struct pci_de
- 		in->using_msix = false;
- 	}
- 
--	err = request_irq(interrupt, ivshm_net_int, 0, DRV_NAME, ndev);
-+	err = request_irq(interrupt, ivshm_net_int, 0, device_name, ndev);
- 	if (err)
- 		goto err_int;
- 
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0007-ivshmem-net-Switch-to-reset-state-on-each-net-stop-a.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0007-ivshmem-net-Switch-to-reset-state-on-each-net-stop-a.patch
deleted file mode 100644
index 609fffeee1..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0007-ivshmem-net-Switch-to-reset-state-on-each-net-stop-a.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 869dce4a7f48b0642e4c902c5d142503dbd37dda Mon Sep 17 00:00:00 2001
-From: Jan Kiszka <jan.kiszka@siemens.com>
-Date: Sun, 1 Jan 2017 15:43:37 +0100
-Subject: [PATCH] ivshmem-net: Switch to reset state on each net stop and on
- driver removal
-
-Improves the state signaling to the remote side after ifconfig down and
-driver removal.
-
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit d0f632b2830146d9892a2b1ab93f866f072412bb)
----
- drivers/net/ivshmem-net.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -554,6 +554,8 @@ static void ivshm_net_do_stop(struct net
- {
- 	struct ivshm_net *in = netdev_priv(ndev);
- 
-+	ivshm_net_set_state(in, IVSHM_NET_STATE_RESET);
-+
- 	if (!test_and_clear_bit(IVSHM_NET_FLAG_RUN, &in->flags))
- 		return;
- 
-@@ -593,7 +595,6 @@ static void ivshm_net_state_change(struc
- 		} else {
- 			netif_carrier_off(ndev);
- 			ivshm_net_do_stop(ndev);
--			ivshm_net_set_state(in, IVSHM_NET_STATE_RESET);
- 		}
- 		break;
- 	}
-@@ -899,6 +900,8 @@ static void ivshm_net_remove(struct pci_
- 	struct net_device *ndev = pci_get_drvdata(pdev);
- 	struct ivshm_net *in = netdev_priv(ndev);
- 
-+	writel(IVSHM_NET_STATE_RESET, &in->ivshm_regs->lstate);
-+
- 	if (in->using_msix)  {
- 		free_irq(in->msix.vector, ndev);
- 		pci_disable_msix(pdev);
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0008-ivshmem-net-Add-ethtool-register-dump.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0008-ivshmem-net-Add-ethtool-register-dump.patch
deleted file mode 100644
index 1a8b4c6844..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0008-ivshmem-net-Add-ethtool-register-dump.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 65e624b3708cb35942297f699d886aa4c8a7e613 Mon Sep 17 00:00:00 2001
-From: Jan Kiszka <jan.kiszka@siemens.com>
-Date: Sun, 1 Jan 2017 15:46:26 +0100
-Subject: [PATCH] ivshmem-net: Add ethtool register dump
-
-Helps debugging inconsistent states.
-
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit 81674136b6936fb8219dac1dcdb6df8fe424143d)
----
- drivers/net/ivshmem-net.c | 31 +++++++++++++++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -748,10 +748,41 @@ static void ivshm_net_get_ethtool_stats(
- 	memset(&in->stats, 0, sizeof(in->stats));
- }
- 
-+#define IVSHM_NET_REGS_LEN	(3 * sizeof(u32) + 6 * sizeof(u16))
-+
-+static int ivshm_net_get_regs_len(struct net_device *ndev)
-+{
-+	return IVSHM_NET_REGS_LEN;
-+}
-+
-+static void ivshm_net_get_regs(struct net_device *ndev,
-+			       struct ethtool_regs *regs, void *p)
-+{
-+	struct ivshm_net *in = netdev_priv(ndev);
-+	u32 *reg32 = p;
-+	u16 *reg16;
-+
-+	*reg32++ = in->lstate;
-+	*reg32++ = in->rstate;
-+	*reg32++ = in->qlen;
-+
-+	reg16 = (u16 *)reg32;
-+
-+	*reg16++ = in->tx.vr.avail ? in->tx.vr.avail->idx : 0;
-+	*reg16++ = in->tx.vr.used ? in->tx.vr.used->idx : 0;
-+	*reg16++ = in->tx.vr.avail ? vring_avail_event(&in->tx.vr) : 0;
-+
-+	*reg16++ = in->rx.vr.avail ? in->rx.vr.avail->idx : 0;
-+	*reg16++ = in->rx.vr.used ? in->rx.vr.used->idx : 0;
-+	*reg16++ = in->rx.vr.avail ? vring_avail_event(&in->rx.vr) : 0;
-+}
-+
- static const struct ethtool_ops ivshm_net_ethtool_ops = {
- 	.get_sset_count		= ivshm_net_get_sset_count,
- 	.get_strings		= ivshm_net_get_strings,
- 	.get_ethtool_stats	= ivshm_net_get_ethtool_stats,
-+	.get_regs_len		= ivshm_net_get_regs_len,
-+	.get_regs		= ivshm_net_get_regs,
- };
- 
- static int ivshm_net_probe(struct pci_dev *pdev,
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0009-ivshmem-net-Fix-stuck-state-machine-during-setup.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0009-ivshmem-net-Fix-stuck-state-machine-during-setup.patch
deleted file mode 100644
index fc23dc45aa..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0009-ivshmem-net-Fix-stuck-state-machine-during-setup.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 74de99b0e1df634949c45df1c370d458e6a3c98a Mon Sep 17 00:00:00 2001
-From: Jan Kiszka <jan.kiszka@siemens.com>
-Date: Sun, 1 Jan 2017 15:54:55 +0100
-Subject: [PATCH] ivshmem-net: Fix stuck state machine during setup
-
-If the remote side is already in INIT state (or even higher) and has a
-cached rstate of RESET, we won't make progress when signaling RESET
-again because the remote side won't send a state update. Fix this by
-enforcing a local check after probe completion.
-
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit fceed9d0ab2486589c57c0793fbfbca4832442b9)
----
- drivers/net/ivshmem-net.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -911,6 +911,7 @@ static int ivshm_net_probe(struct pci_de
- 		writel(IVSHMEM_INTX_ENABLE, &in->ivshm_regs->intxctrl);
- 
- 	writel(IVSHM_NET_STATE_RESET, &in->ivshm_regs->lstate);
-+	ivshm_net_check_state(ndev);
- 
- 	return 0;
- 
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0010-ivshmem-net-Switch-to-relative-descriptor-addresses.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0010-ivshmem-net-Switch-to-relative-descriptor-addresses.patch
deleted file mode 100644
index a2554c7166..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0010-ivshmem-net-Switch-to-relative-descriptor-addresses.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From dd462c6eb2ba6af01ae38644183216c4d5603d90 Mon Sep 17 00:00:00 2001
-From: Jan Kiszka <jan.kiszka@siemens.com>
-Date: Tue, 3 Jan 2017 08:50:01 +0100
-Subject: [PATCH] ivshmem-net: Switch to relative descriptor addresses
-
-Make sure that we do not depend on identity-mapped shared memory
-regions.
-
-This also fixes an off-by-one in the range check of ivshm_net_desc_data.
-
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit fe9c9dd6373892591a7d6b165c3c43045eb349c1)
----
- drivers/net/ivshmem-net.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -123,14 +123,14 @@ static void *ivshm_net_desc_data(struct
- 				 struct vring_desc *desc,
- 				 u32 *len)
- {
--	u64 addr = READ_ONCE(desc->addr);
-+	u64 offs = READ_ONCE(desc->addr);
- 	u32 dlen = READ_ONCE(desc->len);
- 	void *data;
- 
--	if (addr < in->shmaddr || desc->addr > in->shmaddr + in->shmlen)
-+	if (offs >= in->shmlen)
- 		return NULL;
- 
--	data = in->shm + (addr - in->shmaddr);
-+	data = in->shm + offs;
- 
- 	if (data < q->data || data >= q->end)
- 		return NULL;
-@@ -317,7 +317,7 @@ static int ivshm_net_tx_frame(struct net
- 	buf = tx->data + head;
- 	skb_copy_and_csum_dev(skb, buf);
- 
--	desc->addr = in->shmaddr + (buf - in->shm);
-+	desc->addr = buf - in->shm;
- 	desc->len = skb->len;
- 
- 	avail = tx->last_avail_idx++ & (vr->num - 1);
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0011-ivshmem-net-Switch-to-pci_alloc_irq_vectors.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0011-ivshmem-net-Switch-to-pci_alloc_irq_vectors.patch
deleted file mode 100644
index ce37c289e7..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0011-ivshmem-net-Switch-to-pci_alloc_irq_vectors.patch
+++ /dev/null
@@ -1,143 +0,0 @@
-From 8b5d421b2bfa6800d182f74a60afa48cf305fb86 Mon Sep 17 00:00:00 2001
-From: Jan Kiszka <jan.kiszka@siemens.com>
-Date: Tue, 23 May 2017 17:41:00 +0200
-Subject: [PATCH] ivshmem-net: Switch to pci_alloc_irq_vectors
-
-Required by 4.12, and it also simplifies our code. Needs to be folded
-into the initial patch eventually.
-
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit ea6e78c89582711f15a2711f0a35ac3a61d9d074)
----
- drivers/net/ivshmem-net.c | 66 ++++++++++++++++++++---------------------------
- 1 file changed, 28 insertions(+), 38 deletions(-)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -114,8 +114,6 @@ struct ivshm_net {
- 	u32 peer_id;
- 
- 	struct pci_dev *pdev;
--	struct msix_entry msix;
--	bool using_msix;
- };
- 
- static void *ivshm_net_desc_data(struct ivshm_net *in,
-@@ -793,22 +791,21 @@ static int ivshm_net_probe(struct pci_de
- 	struct ivshmem_regs __iomem *regs;
- 	resource_size_t shmaddr;
- 	resource_size_t shmlen;
--	int interrupt;
- 	char *device_name;
- 	void *shm;
- 	u32 ivpos;
--	int err;
-+	int ret;
- 
--	err = pcim_enable_device(pdev);
--	if (err) {
--		dev_err(&pdev->dev, "pci_enable_device: %d\n", err);
--		return err;
-+	ret = pcim_enable_device(pdev);
-+	if (ret) {
-+		dev_err(&pdev->dev, "pci_enable_device: %d\n", ret);
-+		return ret;
- 	}
- 
--	err = pcim_iomap_regions(pdev, BIT(0), DRV_NAME);
--	if (err) {
--		dev_err(&pdev->dev, "pcim_iomap_regions: %d\n", err);
--		return err;
-+	ret = pcim_iomap_regions(pdev, BIT(0), DRV_NAME);
-+	if (ret) {
-+		dev_err(&pdev->dev, "pcim_iomap_regions: %d\n", ret);
-+		return ret;
- 	}
- 
- 	regs = pcim_iomap_table(pdev)[0];
-@@ -869,8 +866,8 @@ static int ivshm_net_probe(struct pci_de
- 	spin_lock_init(&in->tx_free_lock);
- 	spin_lock_init(&in->tx_clean_lock);
- 
--	err = ivshm_net_calc_qsize(ndev);
--	if (err)
-+	ret = ivshm_net_calc_qsize(ndev);
-+	if (ret)
- 		goto err_free;
- 
- 	in->state_wq = alloc_ordered_workqueue(device_name, 0);
-@@ -889,25 +886,21 @@ static int ivshm_net_probe(struct pci_de
- 	netif_carrier_off(ndev);
- 	netif_napi_add(ndev, &in->napi, ivshm_net_poll, NAPI_POLL_WEIGHT);
- 
--	err = register_netdev(ndev);
--	if (err)
-+	ret = register_netdev(ndev);
-+	if (ret)
- 		goto err_wq;
- 
--	err = pci_enable_msix(pdev, &in->msix, 1);
--	if (!err) {
--		interrupt = in->msix.vector;
--		in->using_msix = true;
--	} else {
--		interrupt = pdev->irq;
--		in->using_msix = false;
--	}
--
--	err = request_irq(interrupt, ivshm_net_int, 0, device_name, ndev);
--	if (err)
--		goto err_int;
-+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_LEGACY | PCI_IRQ_MSIX);
-+	if (ret < 0)
-+		goto err_alloc_irq;
-+
-+	ret = request_irq(pci_irq_vector(pdev, 0), ivshm_net_int, 0,
-+			  device_name, ndev);
-+	if (ret)
-+		goto err_request_irq;
- 
- 	pci_set_master(pdev);
--	if (!in->using_msix)
-+	if (!pdev->msix_enabled)
- 		writel(IVSHMEM_INTX_ENABLE, &in->ivshm_regs->intxctrl);
- 
- 	writel(IVSHM_NET_STATE_RESET, &in->ivshm_regs->lstate);
-@@ -915,16 +908,16 @@ static int ivshm_net_probe(struct pci_de
- 
- 	return 0;
- 
--err_int:
--	if (in->using_msix)
--		pci_disable_msix(pdev);
-+err_request_irq:
-+	pci_free_irq_vectors(pdev);
-+err_alloc_irq:
- 	unregister_netdev(ndev);
- err_wq:
- 	destroy_workqueue(in->state_wq);
- err_free:
- 	free_netdev(ndev);
- 
--	return err;
-+	return ret;
- }
- 
- static void ivshm_net_remove(struct pci_dev *pdev)
-@@ -934,13 +927,10 @@ static void ivshm_net_remove(struct pci_
- 
- 	writel(IVSHM_NET_STATE_RESET, &in->ivshm_regs->lstate);
- 
--	if (in->using_msix)  {
--		free_irq(in->msix.vector, ndev);
--		pci_disable_msix(pdev);
--	} else {
-+	if (!pdev->msix_enabled)
- 		writel(0, &in->ivshm_regs->intxctrl);
--		free_irq(pdev->irq, ndev);
--	}
-+	free_irq(pci_irq_vector(pdev, 0), ndev);
-+	pci_free_irq_vectors(pdev);
- 
- 	unregister_netdev(ndev);
- 	cancel_work_sync(&in->state_work);
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0012-ivshmem-net-fill-in-and-check-used-descriptor-chain-.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0012-ivshmem-net-fill-in-and-check-used-descriptor-chain-.patch
deleted file mode 100644
index cdd9f568eb..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0012-ivshmem-net-fill-in-and-check-used-descriptor-chain-.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From ec72823546e39cd486360f44db16cf47f7e8f59e Mon Sep 17 00:00:00 2001
-From: Henning Schild <henning.schild@siemens.com>
-Date: Mon, 18 Sep 2017 18:02:08 +0200
-Subject: [PATCH] ivshmem-net: fill in and check used descriptor chain len
-
-We are using chains of len==1 make that explicit and expect that from
-the remote.
-
-Signed-off-by: Henning Schild <henning.schild@siemens.com>
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit f958c360044184f58605815d428b83fe4329cafd)
----
- drivers/net/ivshmem-net.c | 14 ++++++++------
- 1 file changed, 8 insertions(+), 6 deletions(-)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -335,10 +335,10 @@ static void ivshm_net_tx_clean(struct ne
- {
- 	struct ivshm_net *in = netdev_priv(ndev);
- 	struct ivshm_net_queue *tx = &in->tx;
-+	struct vring_used_elem *used;
- 	struct vring *vr = &tx->vr;
- 	struct vring_desc *desc;
- 	struct vring_desc *fdesc;
--	unsigned int used;
- 	unsigned int num;
- 	u16 used_idx;
- 	u16 last;
-@@ -358,13 +358,14 @@ static void ivshm_net_tx_clean(struct ne
- 		u32 len;
- 		u32 tail;
- 
--		used = vr->used->ring[last & (vr->num - 1)].id;
--		if (used >= vr->num) {
--			netdev_err(ndev, "invalid tx used %d\n", used);
-+		used = vr->used->ring + (last % vr->num);
-+		if (used->id >= vr->num || used->len != 1) {
-+			netdev_err(ndev, "invalid tx used->id %d ->len %d\n",
-+				   used->id, used->len);
- 			break;
- 		}
- 
--		desc = &vr->desc[used];
-+		desc = &vr->desc[used->id];
- 
- 		data = ivshm_net_desc_data(in, &in->tx, desc, &len);
- 		if (!data) {
-@@ -383,7 +384,7 @@ static void ivshm_net_tx_clean(struct ne
- 		else
- 			desc->next = fhead;
- 
--		fhead = used;
-+		fhead = used->id;
- 		last++;
- 		num++;
- 	}
-@@ -433,6 +434,7 @@ static void ivshm_net_rx_finish(struct i
- 
- 	used = rx->last_used_idx++ & (vr->num - 1);
- 	vr->used->ring[used].id = desc_id;
-+	vr->used->ring[used].len = 1;
- 
- 	virt_store_release(&vr->used->idx, rx->last_used_idx);
- }
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0013-ivshmem-net-slightly-improve-debug-output.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0013-ivshmem-net-slightly-improve-debug-output.patch
deleted file mode 100644
index e671fc062e..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0013-ivshmem-net-slightly-improve-debug-output.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 4ee8d876b25a1345804b66213b92a69602abdd83 Mon Sep 17 00:00:00 2001
-From: Henning Schild <henning.schild@siemens.com>
-Date: Mon, 18 Sep 2017 18:02:10 +0200
-Subject: [PATCH] ivshmem-net: slightly improve debug output
-
-There where two lines with the same error message, change one of them.
-
-Signed-off-by: Henning Schild <henning.schild@siemens.com>
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit d66af388dd2512ea7c7a776c731409854ed40a45)
----
- drivers/net/ivshmem-net.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -369,7 +369,7 @@ static void ivshm_net_tx_clean(struct ne
- 
- 		data = ivshm_net_desc_data(in, &in->tx, desc, &len);
- 		if (!data) {
--			netdev_err(ndev, "bad tx descriptor\n");
-+			netdev_err(ndev, "bad tx descriptor, data == NULL\n");
- 			break;
- 		}
- 
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0014-ivshmem-net-set-and-check-descriptor-flags.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0014-ivshmem-net-set-and-check-descriptor-flags.patch
deleted file mode 100644
index b33975b306..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0014-ivshmem-net-set-and-check-descriptor-flags.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 3661172f5786a3d2ebe1d2244f1f08a95e1cfd09 Mon Sep 17 00:00:00 2001
-From: Henning Schild <henning.schild@siemens.com>
-Date: Mon, 18 Sep 2017 18:02:11 +0200
-Subject: [PATCH] ivshmem-net: set and check descriptor flags
-
-We do not support the use of any flags. Make sure the remote does not
-confuse us using flags.
-
-Signed-off-by: Henning Schild <henning.schild@siemens.com>
-[Jan: Remove wrong removal of next field initialization]
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit 986d58d84245e023a1a66ab6495b354b6b8cd2f0)
----
- drivers/net/ivshmem-net.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -123,8 +123,12 @@ static void *ivshm_net_desc_data(struct
- {
- 	u64 offs = READ_ONCE(desc->addr);
- 	u32 dlen = READ_ONCE(desc->len);
-+	u16 flags = READ_ONCE(desc->flags);
- 	void *data;
- 
-+	if (flags)
-+		return NULL;
-+
- 	if (offs >= in->shmlen)
- 		return NULL;
- 
-@@ -317,6 +321,7 @@ static int ivshm_net_tx_frame(struct net
- 
- 	desc->addr = buf - in->shm;
- 	desc->len = skb->len;
-+	desc->flags = 0;
- 
- 	avail = tx->last_avail_idx++ & (vr->num - 1);
- 	vr->avail->ring[avail] = desc_idx;
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0015-ivshmem-net-add-MAC-changing-interface.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0015-ivshmem-net-add-MAC-changing-interface.patch
deleted file mode 100644
index 60fe1e60d6..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0015-ivshmem-net-add-MAC-changing-interface.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From f5dbd1fdd5bf0a85bda432066855f563105fbf9d Mon Sep 17 00:00:00 2001
-From: Henning Schild <henning.schild@siemens.com>
-Date: Wed, 27 Sep 2017 12:59:49 +0200
-Subject: [PATCH] ivshmem-net: add MAC changing interface
-
-Allow ifconfig, ip and other such tools to change the MAC of the
-virtual NIC.
-
-Signed-off-by: Henning Schild <henning.schild@siemens.com>
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit 7744d59d11101f75afaa6f550cabba38c2c0d260)
----
- drivers/net/ivshmem-net.c | 12 +++++++-----
- 1 file changed, 7 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -685,12 +685,14 @@ static void ivshm_net_poll_controller(st
- #endif
- 
- static const struct net_device_ops ivshm_net_ops = {
--	.ndo_open	= ivshm_net_open,
--	.ndo_stop	= ivshm_net_stop,
--	.ndo_start_xmit	= ivshm_net_xmit,
--	.ndo_change_mtu	= ivshm_net_change_mtu,
-+	.ndo_open		= ivshm_net_open,
-+	.ndo_stop		= ivshm_net_stop,
-+	.ndo_start_xmit		= ivshm_net_xmit,
-+	.ndo_change_mtu		= ivshm_net_change_mtu,
-+	.ndo_set_mac_address 	= eth_mac_addr,
-+	.ndo_validate_addr	= eth_validate_addr,
- #ifdef CONFIG_NET_POLL_CONTROLLER
--	.ndo_poll_controller = ivshm_net_poll_controller,
-+	.ndo_poll_controller	= ivshm_net_poll_controller,
- #endif
- };
- 
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0016-ivshmem-net-Silence-compiler-warning.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0016-ivshmem-net-Silence-compiler-warning.patch
deleted file mode 100644
index 9094503049..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0016-ivshmem-net-Silence-compiler-warning.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From efa3ff9e6dfa3ff26c3aef463529047f7285f890 Mon Sep 17 00:00:00 2001
-From: Jan Kiszka <jan.kiszka@siemens.com>
-Date: Tue, 3 Oct 2017 12:24:59 +0200
-Subject: [PATCH] ivshmem-net: Silence compiler warning
-
-At least Linaro's gcc 6.3 does not see the initialization and usage
-dependency of fhead and num. Let's silence this false positive.
-
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit 4d067d37d835c35e8f85481b97c51f20b713ae71)
----
- drivers/net/ivshmem-net.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -356,6 +356,7 @@ static void ivshm_net_tx_clean(struct ne
- 	last = tx->last_used_idx;
- 
- 	fdesc = NULL;
-+	fhead = 0;
- 	num = 0;
- 
- 	while (last != used_idx) {
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0017-ivshmem-net-Fix-bogus-transition-to-RESET-state.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0017-ivshmem-net-Fix-bogus-transition-to-RESET-state.patch
deleted file mode 100644
index 688ad57e91..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0017-ivshmem-net-Fix-bogus-transition-to-RESET-state.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From f9c647d5df14aab2ce40b77a2d8daf9e2065a165 Mon Sep 17 00:00:00 2001
-From: Jan Kiszka <jan.kiszka@siemens.com>
-Date: Sun, 4 Mar 2018 13:16:04 +0100
-Subject: [PATCH] ivshmem-net: Fix bogus transition to RESET state
-
-If we are in READY but the remote is still in INIT, we so far fell back
-to RESET which caused the setup to get stuck. Fix this by only
-transitioning from READY/RUN to RESET in ivshm_net_state_change if the
-remote is in RESET as well.
-
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit b58915e11eba2643d5c68ea0328823a62c21dc49)
----
- drivers/net/ivshmem-net.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -598,7 +598,7 @@ static void ivshm_net_state_change(struc
- 		if (rstate >= IVSHM_NET_STATE_READY) {
- 			netif_carrier_on(ndev);
- 			ivshm_net_run(ndev);
--		} else {
-+		} else if (rstate == IVSHM_NET_STATE_RESET) {
- 			netif_carrier_off(ndev);
- 			ivshm_net_do_stop(ndev);
- 		}
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0018-ivshmem-net-Refactor-and-comment-ivshm_net_state_cha.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0018-ivshmem-net-Refactor-and-comment-ivshm_net_state_cha.patch
deleted file mode 100644
index cb3ffcc323..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0018-ivshmem-net-Refactor-and-comment-ivshm_net_state_cha.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 5192fa99f0d267eb7bd1c79e556430ea8911ae38 Mon Sep 17 00:00:00 2001
-From: Jan Kiszka <jan.kiszka@siemens.com>
-Date: Sun, 4 Mar 2018 13:50:24 +0100
-Subject: [PATCH] ivshmem-net: Refactor and comment ivshm_net_state_change
-
-This should make the state transitioning logic clearer. Also avoid the
-harmless but redundant netif_carrier_on/ivshm_net_run in RUN state.
-
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit 8539efe70fbdf4a0bea75a97c1628fbb38b6590b)
----
- drivers/net/ivshmem-net.c | 23 ++++++++++++++++++++---
- 1 file changed, 20 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -575,14 +575,21 @@ static void ivshm_net_state_change(struc
- 	struct net_device *ndev = in->napi.dev;
- 	u32 rstate = readl(&in->ivshm_regs->rstate);
- 
--
- 	switch (in->lstate) {
- 	case IVSHM_NET_STATE_RESET:
-+		/*
-+		 * Wait for the remote to leave READY/RUN before transitioning
-+		 * to INIT.
-+		 */
- 		if (rstate < IVSHM_NET_STATE_READY)
- 			ivshm_net_set_state(in, IVSHM_NET_STATE_INIT);
- 		break;
- 
- 	case IVSHM_NET_STATE_INIT:
-+		/*
-+		 * Wait for the remote to leave RESET before performing the
-+		 * initialization and moving to READY.
-+		 */
- 		if (rstate > IVSHM_NET_STATE_RESET) {
- 			ivshm_net_init_queues(ndev);
- 			ivshm_net_set_state(in, IVSHM_NET_STATE_READY);
-@@ -594,11 +601,21 @@ static void ivshm_net_state_change(struc
- 		break;
- 
- 	case IVSHM_NET_STATE_READY:
--	case IVSHM_NET_STATE_RUN:
-+		/*
-+		 * Link is up and we are running once the remote is in READY or
-+		 * RUN.
-+		 */
- 		if (rstate >= IVSHM_NET_STATE_READY) {
- 			netif_carrier_on(ndev);
- 			ivshm_net_run(ndev);
--		} else if (rstate == IVSHM_NET_STATE_RESET) {
-+			break;
-+		}
-+		/* fall through */
-+	case IVSHM_NET_STATE_RUN:
-+		/*
-+		 * If the remote goes to RESET, we need to follow immediately.
-+		 */
-+		if (rstate == IVSHM_NET_STATE_RESET) {
- 			netif_carrier_off(ndev);
- 			ivshm_net_do_stop(ndev);
- 		}
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0019-ivshmem-net-Switch-to-netdev_xmit_more-helper.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0019-ivshmem-net-Switch-to-netdev_xmit_more-helper.patch
deleted file mode 100644
index 3346871d8e..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0019-ivshmem-net-Switch-to-netdev_xmit_more-helper.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 6732a2821cf7eeffa284253f80fd757e1ac2df4f Mon Sep 17 00:00:00 2001
-From: Jan Kiszka <jan.kiszka@siemens.com>
-Date: Sun, 2 Jun 2019 11:58:20 +0200
-Subject: [PATCH] ivshmem-net: Switch to netdev_xmit_more helper
-
-The skb field has been removed by 4f296edeb9d4.
-
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit 80c301552ec0b500dd46a2b4f0c9fef78a610ee6)
----
- drivers/net/ivshmem-net.c | 10 ++++++----
- 1 file changed, 6 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ivshmem-net.c
-+++ b/drivers/net/ivshmem-net.c
-@@ -294,7 +294,8 @@ static u32 ivshm_net_tx_advance(struct i
- 	return p;
- }
- 
--static int ivshm_net_tx_frame(struct net_device *ndev, struct sk_buff *skb)
-+static int ivshm_net_tx_frame(struct net_device *ndev, struct sk_buff *skb,
-+			      bool xmit_more)
- {
- 	struct ivshm_net *in = netdev_priv(ndev);
- 	struct ivshm_net_queue *tx = &in->tx;
-@@ -327,7 +328,7 @@ static int ivshm_net_tx_frame(struct net
- 	vr->avail->ring[avail] = desc_idx;
- 	tx->num_added++;
- 
--	if (!skb->xmit_more) {
-+	if (!xmit_more) {
- 		virt_store_release(&vr->avail->idx, tx->last_avail_idx);
- 		ivshm_net_notify_tx(in, tx->num_added);
- 		tx->num_added = 0;
-@@ -509,17 +510,18 @@ static int ivshm_net_poll(struct napi_st
- static netdev_tx_t ivshm_net_xmit(struct sk_buff *skb, struct net_device *ndev)
- {
- 	struct ivshm_net *in = netdev_priv(ndev);
-+	bool xmit_more = netdev_xmit_more();
- 
- 	ivshm_net_tx_clean(ndev);
- 
- 	if (!ivshm_net_tx_ok(in, ndev->mtu)) {
- 		ivshm_net_enable_tx_irq(in);
- 		netif_stop_queue(ndev);
--		skb->xmit_more = 0;
-+		xmit_more = false;
- 		in->stats.tx_pause++;
- 	}
- 
--	ivshm_net_tx_frame(ndev, skb);
-+	ivshm_net_tx_frame(ndev, skb, xmit_more);
- 
- 	in->stats.tx_packets++;
- 	ndev->stats.tx_packets++;
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0020-jailhouse-Add-simple-debug-console-via-the-hyperviso.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0020-jailhouse-Add-simple-debug-console-via-the-hyperviso.patch
deleted file mode 100644
index d3fb53ec58..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0020-jailhouse-Add-simple-debug-console-via-the-hyperviso.patch
+++ /dev/null
@@ -1,164 +0,0 @@
-From 58d058f1fe1cc5981c57be8b48d3b2f74f25c0d6 Mon Sep 17 00:00:00 2001
-From: Jan Kiszka <jan.kiszka@siemens.com>
-Date: Sun, 11 Sep 2016 23:30:04 +0200
-Subject: [PATCH] jailhouse: Add simple debug console via the hypervisor
-
-Jailhouse allows explicitly enabled cells to write character-wise
-messages to the hypervisor debug console. Make use of this for a
-platform-agnostic boot diagnosis channel, specifically for non-root
-cells. This also comes with earlycon support.
-
-Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
-(cherry picked from commit 60685bd589aef4972d20724863079edf2039eaa2)
-From http://git.kiszka.org/?p=linux.git;a=shortlog;h=refs/heads/queues/jailhouse
----
- MAINTAINERS                     |   1 +
- drivers/virt/Kconfig            |  11 +++++
- drivers/virt/Makefile           |   1 +
- drivers/virt/jailhouse_dbgcon.c | 103 ++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 116 insertions(+)
- create mode 100644 drivers/virt/jailhouse_dbgcon.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -8774,6 +8774,7 @@ L:	jailhouse-dev@googlegroups.com
- S:	Maintained
- F:	arch/x86/kernel/jailhouse.c
- F:	arch/x86/include/asm/jailhouse_para.h
-+F:	drivers/virt/jailhouse_dbgcon.c
- 
- JC42.4 TEMPERATURE SENSOR DRIVER
- M:	Guenter Roeck <linux@roeck-us.net>
---- a/drivers/virt/Kconfig
-+++ b/drivers/virt/Kconfig
-@@ -31,5 +31,16 @@ config FSL_HV_MANAGER
-           4) A kernel interface for receiving callbacks when a managed
- 	     partition shuts down.
- 
-+config JAILHOUSE_DBGCON
-+	tristate "Jailhouse console driver"
-+	depends on X86 || ARM || ARM64
-+	help
-+	  The Jailhouse hypervisor provides a simple write-only console for
-+	  debugging the bootstrap process of its cells. This driver registers
-+	  a console with the kernel to make use of it.
-+
-+	  Note that Jailhouse has to be configured to permit a cell the usage
-+	  of the console interface.
-+
- source "drivers/virt/vboxguest/Kconfig"
- endif
---- a/drivers/virt/Makefile
-+++ b/drivers/virt/Makefile
-@@ -4,4 +4,5 @@
- #
- 
- obj-$(CONFIG_FSL_HV_MANAGER)	+= fsl_hypervisor.o
-+obj-$(CONFIG_JAILHOUSE_DBGCON)	+= jailhouse_dbgcon.o
- obj-y				+= vboxguest/
---- /dev/null
-+++ b/drivers/virt/jailhouse_dbgcon.c
-@@ -0,0 +1,103 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Console driver for running over the Jailhouse partitioning hypervisor
-+ *
-+ * Copyright (c) Siemens AG, 2016-2018
-+ *
-+ * Authors:
-+ *  Jan Kiszka <jan.kiszka@siemens.com>
-+ */
-+
-+#include <linux/console.h>
-+#include <linux/hypervisor.h>
-+#include <linux/module.h>
-+#include <linux/serial_core.h>
-+#ifdef CONFIG_X86
-+#include <asm/alternative.h>
-+#endif
-+#ifdef CONFIG_ARM
-+#include <asm/opcodes-virt.h>
-+#endif
-+
-+#define JAILHOUSE_HC_DEBUG_CONSOLE_PUTC		8
-+
-+static void hypervisor_putc(char c)
-+{
-+#if defined(CONFIG_X86)
-+	int result;
-+
-+	asm volatile(
-+		ALTERNATIVE(".byte 0x0f,0x01,0xc1", ".byte 0x0f,0x01,0xd9",
-+			    X86_FEATURE_VMMCALL)
-+		: "=a" (result)
-+		: "a" (JAILHOUSE_HC_DEBUG_CONSOLE_PUTC), "D" (c)
-+		: "memory");
-+#elif defined(CONFIG_ARM)
-+	register u32 num_res asm("r0") = JAILHOUSE_HC_DEBUG_CONSOLE_PUTC;
-+	register u32 arg1 asm("r1") = c;
-+
-+	asm volatile(
-+		__HVC(0x4a48)
-+		: "=r" (num_res)
-+		: "r" (num_res), "r" (arg1)
-+		: "memory");
-+#elif defined(CONFIG_ARM64)
-+	register u64 num_res asm("x0") = JAILHOUSE_HC_DEBUG_CONSOLE_PUTC;
-+	register u64 arg1 asm("x1") = c;
-+
-+	asm volatile(
-+		"hvc #0x4a48\n\t"
-+		: "=r" (num_res)
-+		: "r" (num_res), "r" (arg1)
-+		: "memory");
-+#else
-+#error Unsupported architecture.
-+#endif
-+}
-+
-+static void jailhouse_dbgcon_write(struct console *con, const char *s,
-+				   unsigned count)
-+{
-+	while (count > 0) {
-+		hypervisor_putc(*s);
-+		count--;
-+		s++;
-+	}
-+}
-+
-+static int __init early_jailhouse_dbgcon_setup(struct earlycon_device *device,
-+					       const char *options)
-+{
-+	device->con->write = jailhouse_dbgcon_write;
-+	return 0;
-+}
-+
-+EARLYCON_DECLARE(jailhouse, early_jailhouse_dbgcon_setup);
-+
-+static struct console jailhouse_dbgcon = {
-+	.name = "jailhouse",
-+	.write = jailhouse_dbgcon_write,
-+	.flags = CON_PRINTBUFFER | CON_ANYTIME,
-+	.index = -1,
-+};
-+
-+static int __init jailhouse_dbgcon_init(void)
-+{
-+	if (!jailhouse_paravirt())
-+		return -ENODEV;
-+
-+	register_console(&jailhouse_dbgcon);
-+	return 0;
-+}
-+
-+static void __exit jailhouse_dbgcon_exit(void)
-+{
-+	unregister_console(&jailhouse_dbgcon);
-+}
-+
-+module_init(jailhouse_dbgcon_init);
-+module_exit(jailhouse_dbgcon_exit);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("Jailhouse debug console driver");
-+MODULE_AUTHOR("Jan Kiszka <jan.kiszka@siemens.com>");
diff --git a/target/linux/layerscape/patches-5.4/809-jailhouse-0021-arm64-export-__hyp_stub_vectors.patch b/target/linux/layerscape/patches-5.4/809-jailhouse-0021-arm64-export-__hyp_stub_vectors.patch
deleted file mode 100644
index e523b56b27..0000000000
--- a/target/linux/layerscape/patches-5.4/809-jailhouse-0021-arm64-export-__hyp_stub_vectors.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From a6445874f3371aee451f79c67168f8c4f95d6438 Mon Sep 17 00:00:00 2001
-From: Peng Fan <peng.fan@nxp.com>
-Date: Fri, 15 Nov 2019 17:07:52 +0800
-Subject: [PATCH] arm64: export __hyp_stub_vectors
-
-External hypervisors, like Jailhouse, need this address when they are
-deactivated, in order to restore original state.
-
-Signed-off-by: Peng Fan <peng.fan@nxp.com>
----
- arch/arm64/include/asm/virt.h | 2 ++
- arch/arm64/kernel/hyp-stub.S  | 1 +
- 2 files changed, 3 insertions(+)
-
---- a/arch/arm64/include/asm/virt.h
-+++ b/arch/arm64/include/asm/virt.h
-@@ -62,6 +62,8 @@
-  */
- extern u32 __boot_cpu_mode[2];
- 
-+extern char __hyp_stub_vectors[];
-+
- void __hyp_set_vectors(phys_addr_t phys_vector_base);
- void __hyp_reset_vectors(void);
- 
---- a/arch/arm64/kernel/hyp-stub.S
-+++ b/arch/arm64/kernel/hyp-stub.S
-@@ -42,6 +42,7 @@ ENTRY(__hyp_stub_vectors)
- 	ventry	el1_fiq_invalid			// FIQ 32-bit EL1
- 	ventry	el1_error_invalid		// Error 32-bit EL1
- ENDPROC(__hyp_stub_vectors)
-+EXPORT_SYMBOL(__hyp_stub_vectors);
- 
- 	.align 11
- 
diff --git a/target/linux/layerscape/patches-5.4/810-keys-0001-security-keys-secure_key-Adds-the-secure-key-support.patch b/target/linux/layerscape/patches-5.4/810-keys-0001-security-keys-secure_key-Adds-the-secure-key-support.patch
deleted file mode 100644
index 2347212a91..0000000000
--- a/target/linux/layerscape/patches-5.4/810-keys-0001-security-keys-secure_key-Adds-the-secure-key-support.patch
+++ /dev/null
@@ -1,1285 +0,0 @@
-From 808871b2943a386165614daf2e7f5fb5b33e9fd1 Mon Sep 17 00:00:00 2001
-From: Udit Agarwal <udit.agarwal@nxp.com>
-Date: Wed, 4 Jul 2018 09:51:59 +0530
-Subject: [PATCH] security/keys/secure_key: Adds the secure key support based
- on CAAM.
-
-Secure keys are derieved using CAAM crypto block.
-
-Secure keys derieved are the random number symmetric keys from CAAM.
-Blobs corresponding to the key are formed using CAAM. User space
-will only be able to view the blob of the key.
-
-Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
-Reviewed-by: Sahil Malhotra <sahil.malhotra@nxp.com>
----
- Documentation/security/keys/secure-key.rst |  67 ++++
- MAINTAINERS                                |  11 +
- include/keys/secure-type.h                 |  33 ++
- security/keys/Kconfig                      |  11 +
- security/keys/Makefile                     |   5 +
- security/keys/secure_key.c                 | 339 ++++++++++++++++
- security/keys/securekey_desc.c             | 608 +++++++++++++++++++++++++++++
- security/keys/securekey_desc.h             | 141 +++++++
- 8 files changed, 1215 insertions(+)
- create mode 100644 Documentation/security/keys/secure-key.rst
- create mode 100644 include/keys/secure-type.h
- create mode 100644 security/keys/secure_key.c
- create mode 100644 security/keys/securekey_desc.c
- create mode 100644 security/keys/securekey_desc.h
-
---- /dev/null
-+++ b/Documentation/security/keys/secure-key.rst
-@@ -0,0 +1,67 @@
-+==========
-+Secure Key
-+==========
-+
-+Secure key is the new type added to kernel key ring service.
-+Secure key is a symmetric type key of minimum length 32 bytes
-+and with maximum possible length to be 128 bytes. It is produced
-+in kernel using the CAAM crypto engine. Userspace can only see
-+the blob for the corresponding key. All the blobs are displayed
-+or loaded in hex ascii.
-+
-+Secure key can be created on platforms which supports CAAM
-+hardware block. Secure key can also be used as a master key to
-+create the encrypted keys along with the existing key types in
-+kernel.
-+
-+Secure key uses CAAM hardware to generate the key and blobify its
-+content for userspace. Generated blobs are tied up with the hardware
-+secret key stored in CAAM, hence the same blob will not be able to
-+de-blobify with the different secret key on another machine.
-+
-+Usage::
-+
-+	keyctl add secure <name> "new <keylen>" <ring>
-+	keyctl load secure <name> "load <hex_blob>" <ring>
-+	keyctl print <key_id>
-+
-+"keyctl add secure" option will create the random data of the
-+specified key len using CAAM and store it as a key in kernel.
-+Key contents will be displayed as blobs to the user in hex ascii.
-+User can input key len from 32 bytes to 128 bytes.
-+
-+"keyctl load secure" option will load the blob contents. In kernel,
-+key will be deirved using input blob and CAAM, along with the secret
-+key stored in CAAM.
-+
-+"keyctl print" will return the hex string of the blob corresponding to
-+key_id. Returned blob will be of key_len + 48 bytes. Extra 48 bytes are
-+the header bytes added by the CAAM.
-+
-+Example of secure key usage::
-+
-+1. Create the secure key with name kmk-master of length 32 bytes::
-+
-+	$ keyctl add secure kmk-master "new 32" @u
-+	46001928
-+
-+	$keyctl show
-+	Session Keyring
-+	1030783626 --alswrv      0 65534  keyring: _uid_ses.0
-+	 695927745 --alswrv      0 65534   \_ keyring: _uid.0
-+	  46001928 --als-rv      0     0       \_ secure: kmk-master
-+
-+2. Print the blob contents for the kmk-master key::
-+
-+	$ keyctl print 46001928
-+	d9743445b640f3d59c1670dddc0bc9c2
-+	34fc9aab7dd05c965e6120025012f029b
-+	07faa4776c4f6ed02899e35a135531e9a
-+	6e5c2b51132f9d5aef28f68738e658296
-+	3fe583177cfe50d2542b659a13039
-+
-+	$ keyctl pipe 46001928 > secure_key.blob
-+
-+3. Load the blob in the user key ring::
-+
-+	$ keyctl load secure kmk-master "load 'cat secure_key.blob'" @u
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -9075,6 +9075,17 @@ F:	include/keys/trusted-type.h
- F:	security/keys/trusted.c
- F:	include/keys/trusted.h
- 
-+KEYS-SECURE
-+M:	Udit Agarwal <udit.agarwal@nxp.com>
-+R:	Sahil Malhotra <sahil.malhotra@nxp.com>
-+L:	linux-security-module@vger.kernel.org
-+L:	keyrings@vger.kernel.org
-+S:	Supported
-+F:	include/keys/secure-type.h
-+F:	security/keys/secure_key.c
-+F:	security/keys/securekey_desc.c
-+F:	security/keys/securekey_desc.h
-+
- KEYS/KEYRINGS:
- M:	David Howells <dhowells@redhat.com>
- M:	Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
---- /dev/null
-+++ b/include/keys/secure-type.h
-@@ -0,0 +1,33 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2018 NXP.
-+ *
-+ */
-+
-+#ifndef _KEYS_SECURE_TYPE_H
-+#define _KEYS_SECURE_TYPE_H
-+
-+#include <linux/key.h>
-+#include <linux/rcupdate.h>
-+
-+/* Minimum key size to be used is 32 bytes and maximum key size fixed
-+ * is 128 bytes.
-+ * Blob size to be kept is Maximum key size + blob header added by CAAM.
-+ */
-+
-+#define MIN_KEY_SIZE                    32
-+#define MAX_KEY_SIZE                    128
-+#define BLOB_HEADER_SIZE		48
-+
-+#define MAX_BLOB_SIZE                   (MAX_KEY_SIZE + BLOB_HEADER_SIZE)
-+
-+struct secure_key_payload {
-+	struct rcu_head rcu;
-+	unsigned int key_len;
-+	unsigned int blob_len;
-+	unsigned char key[MAX_KEY_SIZE + 1];
-+	unsigned char blob[MAX_BLOB_SIZE];
-+};
-+
-+extern struct key_type key_type_secure;
-+#endif
---- a/security/keys/Kconfig
-+++ b/security/keys/Kconfig
-@@ -90,6 +90,17 @@ config TRUSTED_KEYS
- 
- 	  If you are unsure as to whether this is required, answer N.
- 
-+config SECURE_KEYS
-+	tristate "SECURE_KEYS"
-+	depends on KEYS && CRYPTO_DEV_FSL_CAAM && CRYPTO_DEV_FSL_CAAM_JR
-+	help
-+	  This option provide support for creating secure-type key and blobs
-+	  in kernel. Secure keys are random number symmetric keys generated
-+	  from CAAM. The CAAM creates the blobs for the random key.
-+	  Userspace will only be able to see the blob.
-+
-+	  If you are unsure as to whether this is required, answer N.
-+
- config ENCRYPTED_KEYS
- 	tristate "ENCRYPTED KEYS"
- 	depends on KEYS
---- a/security/keys/Makefile
-+++ b/security/keys/Makefile
-@@ -29,4 +29,9 @@ obj-$(CONFIG_ASYMMETRIC_KEY_TYPE) += key
- #
- obj-$(CONFIG_BIG_KEYS) += big_key.o
- obj-$(CONFIG_TRUSTED_KEYS) += trusted.o
-+CFLAGS_secure_key.o += -I$(obj)/../../drivers/crypto/caam/
-+CFLAGS_securekey_desc.o += -I$(obj)/../../drivers/crypto/caam/
-+obj-$(CONFIG_SECURE_KEYS) += securekey.o
-+securekey-y := securekey_desc.o \
-+	       secure_key.o
- obj-$(CONFIG_ENCRYPTED_KEYS) += encrypted-keys/
---- /dev/null
-+++ b/security/keys/secure_key.c
-@@ -0,0 +1,339 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/* Copyright (C) 2018 NXP
-+ * Secure key is generated using NXP CAAM hardware block. CAAM generates the
-+ * random number (used as a key) and creates its blob for the user.
-+ */
-+
-+#include <linux/slab.h>
-+#include <linux/parser.h>
-+#include <linux/string.h>
-+#include <linux/key-type.h>
-+#include <linux/rcupdate.h>
-+#include <keys/secure-type.h>
-+#include <linux/completion.h>
-+
-+#include "securekey_desc.h"
-+
-+static const char hmac_alg[] = "hmac(sha1)";
-+static const char hash_alg[] = "sha1";
-+
-+static struct crypto_shash *hashalg;
-+static struct crypto_shash *hmacalg;
-+
-+enum {
-+	error = -1,
-+	new_key,
-+	load_blob,
-+};
-+
-+static const match_table_t key_tokens = {
-+	{new_key, "new"},
-+	{load_blob, "load"},
-+	{error, NULL}
-+};
-+
-+static struct secure_key_payload *secure_payload_alloc(struct key *key)
-+{
-+	struct secure_key_payload *sec_key = NULL;
-+	int ret = 0;
-+
-+	ret = key_payload_reserve(key, sizeof(*sec_key));
-+	if (ret < 0)
-+		goto out;
-+
-+	sec_key = kzalloc(sizeof(*sec_key), GFP_KERNEL);
-+	if (!sec_key)
-+		goto out;
-+
-+out:
-+	return sec_key;
-+}
-+
-+/*
-+ * parse_inputdata - parse the keyctl input data and fill in the
-+ *		     payload structure for key or its blob.
-+ * param[in]: data pointer to the data to be parsed for creating key.
-+ * param[in]: p pointer to secure key payload structure to fill parsed data
-+ * On success returns 0, otherwise -EINVAL.
-+ */
-+static int parse_inputdata(char *data, struct secure_key_payload *p)
-+{
-+	substring_t args[MAX_OPT_ARGS];
-+	long keylen = 0;
-+	int ret = -EINVAL;
-+	int key_cmd = -EINVAL;
-+	char *c = NULL;
-+
-+	c = strsep(&data, " \t");
-+	if (!c) {
-+		ret = -EINVAL;
-+		goto out;
-+	}
-+
-+	/* Get the keyctl command i.e. new_key or load_blob etc */
-+	key_cmd = match_token(c, key_tokens, args);
-+
-+	switch (key_cmd) {
-+	case new_key:
-+		/* first argument is key size */
-+		c = strsep(&data, " \t");
-+		if (!c) {
-+			ret = -EINVAL;
-+			goto out;
-+		}
-+
-+		ret = kstrtol(c, 10, &keylen);
-+		if (ret < 0 || keylen < MIN_KEY_SIZE ||
-+						keylen > MAX_KEY_SIZE) {
-+			ret = -EINVAL;
-+			goto out;
-+		}
-+
-+		p->key_len = keylen;
-+		ret = new_key;
-+
-+		break;
-+	case load_blob:
-+		/* first argument is blob data for CAAM*/
-+		c = strsep(&data, " \t");
-+		if (!c) {
-+			ret = -EINVAL;
-+			goto out;
-+		}
-+
-+		/* Blob_len = No of characters in blob/2 */
-+		p->blob_len = strlen(c) / 2;
-+		if (p->blob_len > MAX_BLOB_SIZE) {
-+			ret = -EINVAL;
-+			goto out;
-+		}
-+
-+		ret = hex2bin(p->blob, c, p->blob_len);
-+		if (ret < 0) {
-+			ret = -EINVAL;
-+			goto out;
-+		}
-+		ret = load_blob;
-+
-+		break;
-+	case error:
-+		ret = -EINVAL;
-+		break;
-+	}
-+
-+out:
-+	return ret;
-+}
-+
-+/*
-+ * secure_instantiate - create a new secure type key.
-+ * Supports the operation to generate a new key. A random number
-+ * is generated from CAAM as key data and the corresponding red blob
-+ * is formed and stored as key_blob.
-+ * Also supports the operation to load the blob and key is derived using
-+ * that blob from CAAM.
-+ * On success, return 0. Otherwise return errno.
-+ */
-+static int secure_instantiate(struct key *key,
-+		struct key_preparsed_payload *prep)
-+{
-+	struct secure_key_payload *payload = NULL;
-+	size_t datalen = prep->datalen;
-+	char *data = NULL;
-+	int key_cmd = 0;
-+	int ret = 0;
-+	enum sk_req_type sk_op_type;
-+	struct device *dev = NULL;
-+
-+	if (datalen <= 0 || datalen > 32767 || !prep->data) {
-+		ret = -EINVAL;
-+		goto out;
-+	}
-+
-+	data = kmalloc(datalen + 1, GFP_KERNEL);
-+	if (!data) {
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+
-+	memcpy(data, prep->data, datalen);
-+	data[datalen] = '\0';
-+
-+	payload = secure_payload_alloc(key);
-+	if (!payload) {
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+
-+	/* Allocate caam job ring for operation to be performed from CAAM */
-+	dev = caam_jr_alloc();
-+	if (!dev) {
-+		pr_info("caam_jr_alloc failed\n");
-+		ret = -ENODEV;
-+		goto out;
-+	}
-+
-+	key_cmd = parse_inputdata(data, payload);
-+	if (key_cmd < 0) {
-+		ret = key_cmd;
-+		goto out;
-+	}
-+
-+	switch (key_cmd) {
-+	case load_blob:
-+		/*
-+		 * Red blob decryption to be done for load operation
-+		 * to derive the key.
-+		 */
-+		sk_op_type = sk_red_blob_dec;
-+		ret = key_deblob(payload, sk_op_type, dev);
-+		if (ret != 0) {
-+			pr_info("secure_key: key_blob decap fail (%d)\n", ret);
-+			goto out;
-+		}
-+		break;
-+	case new_key:
-+		/* Get Random number from caam of the specified length */
-+		sk_op_type = sk_get_random;
-+		ret = caam_get_random(payload, sk_op_type, dev);
-+		if (ret != 0) {
-+			pr_info("secure_key: get_random fail (%d)\n", ret);
-+			goto out;
-+		}
-+
-+		/* Generate red blob of key random bytes with CAAM */
-+		sk_op_type = sk_red_blob_enc;
-+		ret = key_blob(payload, sk_op_type, dev);
-+		if (ret != 0) {
-+			pr_info("secure_key: key_blob encap fail (%d)\n", ret);
-+			goto out;
-+		}
-+		break;
-+	default:
-+		ret = -EINVAL;
-+		goto out;
-+	}
-+out:
-+	if (data)
-+		kzfree(data);
-+	if (dev)
-+		caam_jr_free(dev);
-+
-+	if (!ret)
-+		rcu_assign_keypointer(key, payload);
-+	else
-+		kzfree(payload);
-+
-+	return ret;
-+}
-+
-+/*
-+ * secure_read - copy the  blob data to userspace in hex.
-+ * param[in]: key pointer to key struct
-+ * param[in]: buffer pointer to user data for creating key
-+ * param[in]: buflen is the length of the buffer
-+ * On success, return to userspace the secure key data size.
-+ */
-+static long secure_read(const struct key *key, char __user *buffer,
-+			 size_t buflen)
-+{
-+	const struct secure_key_payload *p = NULL;
-+	char *ascii_buf;
-+	char *bufp;
-+	int i;
-+
-+	p = dereference_key_locked(key);
-+	if (!p)
-+		return -EINVAL;
-+
-+	if (buffer && buflen >= 2 * p->blob_len) {
-+		ascii_buf = kmalloc(2 * p->blob_len, GFP_KERNEL);
-+		if (!ascii_buf)
-+			return -ENOMEM;
-+
-+		bufp = ascii_buf;
-+		for (i = 0; i < p->blob_len; i++)
-+			bufp = hex_byte_pack(bufp, p->blob[i]);
-+		if (copy_to_user(buffer, ascii_buf, 2 * p->blob_len) != 0) {
-+			kzfree(ascii_buf);
-+			return -EFAULT;
-+		}
-+		kzfree(ascii_buf);
-+	}
-+	return 2 * p->blob_len;
-+}
-+
-+/*
-+ * secure_destroy - clear and free the key's payload
-+ */
-+static void secure_destroy(struct key *key)
-+{
-+	kzfree(key->payload.data[0]);
-+}
-+
-+struct key_type key_type_secure = {
-+	.name = "secure",
-+	.instantiate = secure_instantiate,
-+	.destroy = secure_destroy,
-+	.read = secure_read,
-+};
-+EXPORT_SYMBOL_GPL(key_type_secure);
-+
-+static void secure_shash_release(void)
-+{
-+	if (hashalg)
-+		crypto_free_shash(hashalg);
-+	if (hmacalg)
-+		crypto_free_shash(hmacalg);
-+}
-+
-+static int __init secure_shash_alloc(void)
-+{
-+	int ret;
-+
-+	hmacalg = crypto_alloc_shash(hmac_alg, 0, CRYPTO_ALG_ASYNC);
-+	if (IS_ERR(hmacalg)) {
-+		pr_info("secure_key: could not allocate crypto %s\n",
-+				hmac_alg);
-+		return PTR_ERR(hmacalg);
-+	}
-+
-+	hashalg = crypto_alloc_shash(hash_alg, 0, CRYPTO_ALG_ASYNC);
-+	if (IS_ERR(hashalg)) {
-+		pr_info("secure_key: could not allocate crypto %s\n",
-+				hash_alg);
-+		ret = PTR_ERR(hashalg);
-+		goto hashalg_fail;
-+	}
-+
-+	return 0;
-+
-+hashalg_fail:
-+	crypto_free_shash(hmacalg);
-+	return ret;
-+}
-+
-+static int __init init_secure_key(void)
-+{
-+	int ret;
-+
-+	ret = secure_shash_alloc();
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = register_key_type(&key_type_secure);
-+	if (ret < 0)
-+		secure_shash_release();
-+	return ret;
-+}
-+
-+static void __exit cleanup_secure_key(void)
-+{
-+	secure_shash_release();
-+	unregister_key_type(&key_type_secure);
-+}
-+
-+late_initcall(init_secure_key);
-+module_exit(cleanup_secure_key);
-+
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/security/keys/securekey_desc.c
-@@ -0,0 +1,608 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2018 NXP
-+ *
-+ */
-+
-+#include <keys/secure-type.h>
-+#include "securekey_desc.h"
-+
-+/* key modifier for blob encapsulation & decapsulation descriptor */
-+u8 key_modifier[] = "SECURE_KEY";
-+u32 key_modifier_len = 10;
-+
-+void caam_sk_rng_desc(struct sk_req *skreq, struct sk_desc *skdesc)
-+{
-+	struct sk_fetch_rnd_data *fetch_rnd_data = NULL;
-+	struct random_desc *rnd_desc = NULL;
-+	size_t len = 0;
-+	u32 *desc = skreq->hwdesc;
-+
-+	init_job_desc(desc, 0);
-+
-+	fetch_rnd_data = &skreq->req_u.sk_fetch_rnd_data;
-+	rnd_desc = &skdesc->dma_u.random_descp;
-+	len = fetch_rnd_data->key_len;
-+
-+	/* command 0x82500000 */
-+	append_cmd(desc, CMD_OPERATION | OP_TYPE_CLASS1_ALG |
-+			OP_ALG_ALGSEL_RNG);
-+	/* command 0x60340000 | len */
-+	append_cmd(desc, CMD_FIFO_STORE | FIFOST_TYPE_RNGSTORE | len);
-+	append_ptr(desc, rnd_desc->rnd_data);
-+}
-+
-+void caam_sk_redblob_encap_desc(struct sk_req *skreq, struct sk_desc *skdesc)
-+{
-+	struct redblob_encap_desc *red_blob_desc =
-+					&skdesc->dma_u.redblob_encapdesc;
-+	struct sk_red_blob_encap *red_blob_req =
-+					&skreq->req_u.sk_red_blob_encap;
-+	u32 *desc = skreq->hwdesc;
-+
-+	init_job_desc(desc, 0);
-+
-+	/* Load class 2 key with key modifier. */
-+	append_key_as_imm(desc, key_modifier, key_modifier_len,
-+			  key_modifier_len, CLASS_2 | KEY_DEST_CLASS_REG);
-+
-+	/* SEQ IN PTR Command. */
-+	append_seq_in_ptr(desc, red_blob_desc->in_data, red_blob_req->data_sz,
-+			  0);
-+
-+	/* SEQ OUT PTR Command. */
-+	append_seq_out_ptr(desc, red_blob_desc->redblob,
-+			   red_blob_req->redblob_sz, 0);
-+
-+	/* RedBlob encapsulation PROTOCOL Command. */
-+	append_operation(desc, OP_TYPE_ENCAP_PROTOCOL | OP_PCLID_BLOB);
-+}
-+
-+/* void caam_sk_redblob_decap_desc(struct sk_req *skreq, struct sk_desc *skdesc)
-+ * brief CAAM Descriptor creator from redblob to plaindata.
-+ * param[in] skreq Pointer to secure key request structure
-+ * param[in] skdesc Pointer to secure key descriptor structure
-+ */
-+void caam_sk_redblob_decap_desc(struct sk_req *skreq, struct sk_desc *skdesc)
-+{
-+	struct redblob_decap_desc *red_blob_desc =
-+					&skdesc->dma_u.redblob_decapdesc;
-+	struct sk_red_blob_decap *red_blob_req =
-+					&skreq->req_u.sk_red_blob_decap;
-+	u32 *desc = skreq->hwdesc;
-+
-+	init_job_desc(desc, 0);
-+
-+	/* Load class 2 key with key modifier. */
-+	append_key_as_imm(desc, key_modifier, key_modifier_len,
-+			  key_modifier_len, CLASS_2 | KEY_DEST_CLASS_REG);
-+
-+	/* SEQ IN PTR Command. */
-+	append_seq_in_ptr(desc, red_blob_desc->redblob,
-+			  red_blob_req->redblob_sz, 0);
-+
-+	/* SEQ OUT PTR Command. */
-+	append_seq_out_ptr(desc, red_blob_desc->out_data,
-+			   red_blob_req->data_sz, 0);
-+
-+	/* RedBlob decapsulation PROTOCOL Command. */
-+	append_operation(desc, OP_TYPE_DECAP_PROTOCOL | OP_PCLID_BLOB);
-+}
-+
-+/* int caam_sk_get_random_map(struct device *dev, struct sk_req *req,
-+ *			      struct sk_desc *skdesc)
-+ * brief DMA map the buffer virtual pointers to physical address.
-+ * param[in] dev Pointer to job ring device structure
-+ * param[in] req Pointer to secure key request structure
-+ * param[in] skdesc Pointer to secure key descriptor structure
-+ * return 0 on success, error value otherwise.
-+ */
-+int caam_sk_get_random_map(struct device *dev, struct sk_req *req,
-+			   struct sk_desc *skdesc)
-+{
-+	struct sk_fetch_rnd_data *fetch_rnd_data;
-+	struct random_desc *rnd_desc;
-+
-+	fetch_rnd_data = &req->req_u.sk_fetch_rnd_data;
-+	rnd_desc = &skdesc->dma_u.random_descp;
-+
-+	rnd_desc->rnd_data = dma_map_single(dev, fetch_rnd_data->data,
-+				fetch_rnd_data->key_len, DMA_FROM_DEVICE);
-+
-+	if (dma_mapping_error(dev, rnd_desc->rnd_data)) {
-+		dev_err(dev, "Unable to map memory\n");
-+		goto sk_random_map_fail;
-+	}
-+	return 0;
-+
-+sk_random_map_fail:
-+	return -ENOMEM;
-+}
-+
-+/* int caam_sk_redblob_encap_map(struct device *dev, struct sk_req *req,
-+ *					struct sk_desc *skdesc)
-+ * brief DMA map the buffer virtual pointers to physical address.
-+ * param[in] dev Pointer to job ring device structure
-+ * param[in] req Pointer to secure key request structure
-+ * param[in] skdesc Pointer to secure key descriptor structure
-+ * return 0 on success, error value otherwise.
-+ */
-+int caam_sk_redblob_encap_map(struct device *dev, struct sk_req *req,
-+			      struct sk_desc *skdesc)
-+{
-+	struct sk_red_blob_encap *red_blob_encap;
-+	struct redblob_encap_desc *red_blob_desc;
-+
-+	red_blob_encap = &req->req_u.sk_red_blob_encap;
-+	red_blob_desc = &skdesc->dma_u.redblob_encapdesc;
-+
-+	red_blob_desc->in_data = dma_map_single(dev, red_blob_encap->data,
-+					red_blob_encap->data_sz, DMA_TO_DEVICE);
-+	if (dma_mapping_error(dev, red_blob_desc->in_data)) {
-+		dev_err(dev, "Unable to map memory\n");
-+		goto sk_data_fail;
-+	}
-+
-+	red_blob_desc->redblob = dma_map_single(dev, red_blob_encap->redblob,
-+				red_blob_encap->redblob_sz, DMA_FROM_DEVICE);
-+	if (dma_mapping_error(dev, red_blob_desc->redblob)) {
-+		dev_err(dev, "Unable to map memory\n");
-+		goto sk_redblob_fail;
-+	}
-+
-+	return 0;
-+
-+sk_redblob_fail:
-+	dma_unmap_single(dev, red_blob_desc->in_data, red_blob_encap->data_sz,
-+			 DMA_TO_DEVICE);
-+sk_data_fail:
-+	return -ENOMEM;
-+}
-+
-+/* static int caam_sk_redblob_decap_map(struct device *dev,
-+ *					    struct sk_req *req,
-+ *					    struct sk_desc *skdesc)
-+ * brief DMA map the buffer virtual pointers to physical address.
-+ * param[in] dev Pointer to job ring device structure
-+ * param[in] req Pointer to secure key request structure
-+ * param[in] skdesc Pointer to secure key descriptor structure
-+ * return 0 on success, error value otherwise.
-+ */
-+int caam_sk_redblob_decap_map(struct device *dev, struct sk_req *req,
-+			      struct sk_desc *skdesc)
-+{
-+	struct sk_red_blob_decap *red_blob_decap;
-+	struct redblob_decap_desc *red_blob_desc;
-+
-+	red_blob_decap = &req->req_u.sk_red_blob_decap;
-+	red_blob_desc = &skdesc->dma_u.redblob_decapdesc;
-+
-+	red_blob_desc->redblob = dma_map_single(dev, red_blob_decap->redblob,
-+				red_blob_decap->redblob_sz, DMA_TO_DEVICE);
-+	if (dma_mapping_error(dev, red_blob_desc->redblob)) {
-+		dev_err(dev, "Unable to map memory\n");
-+		goto sk_redblob_fail;
-+	}
-+
-+	red_blob_desc->out_data = dma_map_single(dev, red_blob_decap->data,
-+				red_blob_decap->data_sz, DMA_FROM_DEVICE);
-+	if (dma_mapping_error(dev, red_blob_desc->out_data)) {
-+		dev_err(dev, "Unable to map memory\n");
-+		goto sk_data_fail;
-+	}
-+
-+	return 0;
-+
-+sk_data_fail:
-+	dma_unmap_single(dev, red_blob_desc->redblob,
-+			 red_blob_decap->redblob_sz, DMA_TO_DEVICE);
-+sk_redblob_fail:
-+	return -ENOMEM;
-+}
-+
-+/* @fn void securekey_unmap(struct device *dev,
-+ *			    struct sk_desc *skdesc, struct sk_req *req)
-+ * @brief DMA unmap the buffer pointers.
-+ * @param[in] dev Pointer to job ring device structure
-+ * @param[in] skdesc Pointer to secure key descriptor structure
-+ * @param[in] req Pointer to secure key request structure
-+ */
-+void securekey_unmap(struct device *dev,
-+		     struct sk_desc *skdesc, struct sk_req *req)
-+{
-+
-+	switch (req->type) {
-+	case sk_get_random:
-+		{
-+			struct sk_fetch_rnd_data *fetch_rnd_data;
-+			struct random_desc *rnd_desc;
-+
-+			fetch_rnd_data = &req->req_u.sk_fetch_rnd_data;
-+			rnd_desc = &skdesc->dma_u.random_descp;
-+
-+			/* Unmap Descriptor buffer pointers. */
-+			dma_unmap_single(dev, rnd_desc->rnd_data,
-+					 fetch_rnd_data->key_len,
-+					 DMA_FROM_DEVICE);
-+			break;
-+		}
-+	case sk_red_blob_enc:
-+		{
-+			struct sk_red_blob_encap *red_blob_encap;
-+			struct redblob_encap_desc *red_blob_desc;
-+
-+			red_blob_encap = &req->req_u.sk_red_blob_encap;
-+			red_blob_desc = &skdesc->dma_u.redblob_encapdesc;
-+
-+			/* Unmap Descriptor buffer pointers. */
-+			dma_unmap_single(dev, red_blob_desc->in_data,
-+					 red_blob_encap->data_sz,
-+					 DMA_TO_DEVICE);
-+
-+			dma_unmap_single(dev, red_blob_desc->redblob,
-+					 red_blob_encap->redblob_sz,
-+					 DMA_FROM_DEVICE);
-+
-+			break;
-+		}
-+	case sk_red_blob_dec:
-+		{
-+			struct sk_red_blob_decap *red_blob_decap;
-+			struct redblob_decap_desc *red_blob_desc;
-+
-+			red_blob_decap = &req->req_u.sk_red_blob_decap;
-+			red_blob_desc = &skdesc->dma_u.redblob_decapdesc;
-+
-+			/* Unmap Descriptor buffer pointers. */
-+			dma_unmap_single(dev, red_blob_desc->redblob,
-+					 red_blob_decap->redblob_sz,
-+					 DMA_TO_DEVICE);
-+
-+			dma_unmap_single(dev, red_blob_desc->out_data,
-+					 red_blob_decap->data_sz,
-+					 DMA_FROM_DEVICE);
-+
-+			break;
-+		}
-+	default:
-+		dev_err(dev, "Unable to find request type\n");
-+		break;
-+	}
-+	kfree(skdesc);
-+}
-+
-+/*  int caam_securekey_desc_init(struct device *dev, struct sk_req *req)
-+ *  brief CAAM Descriptor creator for secure key operations.
-+ *  param[in] dev Pointer to job ring device structure
-+ *  param[in] req Pointer to secure key request structure
-+ *  return 0 on success, error value otherwise.
-+ */
-+int caam_securekey_desc_init(struct device *dev, struct sk_req *req)
-+{
-+	struct sk_desc *skdesc = NULL;
-+	int ret = 0;
-+
-+	switch (req->type) {
-+	case sk_get_random:
-+		{
-+			skdesc = kmalloc(sizeof(*skdesc), GFP_DMA);
-+			if (!skdesc) {
-+				ret = -ENOMEM;
-+				goto out;
-+			}
-+			skdesc->req_type = req->type;
-+
-+			if (caam_sk_get_random_map(dev, req, skdesc)) {
-+				dev_err(dev, "caam get_random map fail\n");
-+				ret = -ENOMEM;
-+				goto out;
-+			}
-+			caam_sk_rng_desc(req, skdesc);
-+			break;
-+		}
-+	case sk_red_blob_enc:
-+		{
-+			skdesc = kmalloc(sizeof(*skdesc), GFP_DMA);
-+			if (!skdesc) {
-+				ret = -ENOMEM;
-+				goto out;
-+			}
-+
-+			skdesc->req_type = req->type;
-+
-+			if (caam_sk_redblob_encap_map(dev, req, skdesc)) {
-+				dev_err(dev, "caam redblob_encap map fail\n");
-+				ret = -ENOMEM;
-+				goto out;
-+			}
-+
-+			/* Descriptor function to create redblob from data. */
-+			caam_sk_redblob_encap_desc(req, skdesc);
-+			break;
-+		}
-+
-+	case sk_red_blob_dec:
-+		{
-+			skdesc = kmalloc(sizeof(*skdesc), GFP_DMA);
-+			if (!skdesc) {
-+				ret = -ENOMEM;
-+				goto out;
-+			}
-+
-+			skdesc->req_type = req->type;
-+
-+			if (caam_sk_redblob_decap_map(dev, req, skdesc)) {
-+				dev_err(dev, "caam redblob_decap map fail\n");
-+				ret = -ENOMEM;
-+				goto out;
-+			}
-+
-+			/* Descriptor function to decap data from redblob. */
-+			caam_sk_redblob_decap_desc(req, skdesc);
-+			break;
-+		}
-+	default:
-+		pr_debug("Unknown request type\n");
-+		ret = -EINVAL;
-+		goto out;
-+	}
-+
-+	req->desc_pointer = (void *)skdesc;
-+
-+out:
-+	return ret;
-+}
-+
-+/* static void caam_op_done (struct device *dev, u32 *desc, u32 ret,
-+ *			     void *context)
-+ * brief callback function to be called when descriptor executed.
-+ * param[in] dev Pointer to device structure
-+ * param[in] desc descriptor pointer
-+ * param[in] ret return status of Job submitted
-+ * param[in] context void pointer
-+ */
-+static void caam_op_done(struct device *dev, u32 *desc, u32 ret,
-+			 void *context)
-+{
-+	struct sk_req *req = context;
-+
-+	if (ret) {
-+		dev_err(dev, "caam op done err: %x\n", ret);
-+		/* print the error source name. */
-+		caam_jr_strstatus(dev, ret);
-+	}
-+	/* Call securekey_unmap function for unmapping the buffer pointers. */
-+	securekey_unmap(dev, req->desc_pointer, req);
-+
-+	req->ret = ret;
-+	complete(&req->comp);
-+}
-+
-+
-+/*  static int sk_job_submit(struct device *jrdev, struct sk_req *req)
-+ *  brief Enqueue a Job descriptor to Job ring and wait until SEC returns.
-+ *  param[in] jrdev Pointer to job ring device structure
-+ *  param[in] req Pointer to secure key request structure
-+ *  return 0 on success, error value otherwise.
-+ */
-+static int sk_job_submit(struct device *jrdev, struct sk_req *req)
-+{
-+	int ret;
-+
-+	init_completion(&req->comp);
-+
-+	/* caam_jr_enqueue function for Enqueue a job descriptor */
-+	ret = caam_jr_enqueue(jrdev, req->hwdesc, caam_op_done, req);
-+	if (!ret)
-+		wait_for_completion_interruptible(&req->comp);
-+
-+	ret = req->ret;
-+	return ret;
-+}
-+
-+/* caam_get_random(struct secure_key_payload *p,  enum sk_req_type fetch_rnd,
-+ *		   struct device *dev)
-+ * Create the random number of the specified length using CAAM block
-+ * param[in]: out pointer to place the random bytes
-+ * param[in]: length for the random data bytes.
-+ * param[in]: dev Pointer to job ring device structure
-+ * If operation is successful return 0, otherwise error.
-+ */
-+int caam_get_random(struct secure_key_payload *p,  enum sk_req_type fetch_rnd,
-+		    struct device *dev)
-+{
-+	struct sk_fetch_rnd_data *fetch_rnd_data = NULL;
-+	struct sk_req *req = NULL;
-+	int ret = 0;
-+	void *temp = NULL;
-+
-+	req = kmalloc(sizeof(struct sk_req), GFP_DMA);
-+	if (!req) {
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+
-+	req->type = fetch_rnd;
-+	fetch_rnd_data = &(req->req_u.sk_fetch_rnd_data);
-+
-+	/* initialise with key length */
-+	fetch_rnd_data->key_len = p->key_len;
-+
-+	temp = kmalloc(fetch_rnd_data->key_len, GFP_DMA);
-+	if (!temp) {
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+	fetch_rnd_data->data = temp;
-+
-+	ret = caam_securekey_desc_init(dev, req);
-+
-+	if (ret) {
-+		pr_info("caam_securekey_desc_init failed\n");
-+		goto out;
-+	}
-+
-+	ret = sk_job_submit(dev, req);
-+	if (!ret) {
-+		/*Copy output to key buffer. */
-+		memcpy(p->key, fetch_rnd_data->data, p->key_len);
-+	} else {
-+		ret = -EINVAL;
-+	}
-+
-+out:
-+	if (req)
-+		kfree(req);
-+
-+	if (temp)
-+		kfree(temp);
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL(caam_get_random);
-+
-+/* key_deblob(struct secure_key_payload *p, enum sk_req_type decap_type
-+ *		struct device *dev)
-+ * Deblobify the blob to get the key data and fill in secure key payload struct
-+ * param[in] p pointer to the secure key payload
-+ * param[in] decap_type operation to be done.
-+ * param[in] dev dev Pointer to job ring device structure
-+ * If operation is successful return 0, otherwise error.
-+ */
-+int key_deblob(struct secure_key_payload *p, enum sk_req_type decap_type,
-+	       struct device *dev)
-+{
-+	unsigned int blob_len;
-+	struct sk_red_blob_decap *d_blob;
-+	struct sk_req *req = NULL;
-+	int total_sz = 0, *temp = NULL, ret = 0;
-+
-+	req = kmalloc(sizeof(struct sk_req), GFP_DMA);
-+	if (!req) {
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+
-+	d_blob = &(req->req_u.sk_red_blob_decap);
-+	blob_len = p->blob_len;
-+	req->type = decap_type;
-+
-+	/*
-+	 * Red blob size is the blob_len filled in payload struct
-+	 * Data_sz i.e. key is the blob_len - blob header size
-+	 */
-+
-+	d_blob->redblob_sz = blob_len;
-+	d_blob->data_sz = blob_len - (SK_BLOB_KEY_SZ + SK_BLOB_MAC_SZ);
-+	total_sz = d_blob->data_sz + d_blob->redblob_sz;
-+
-+	temp = kmalloc(total_sz, GFP_DMA);
-+	if (!temp) {
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+
-+	req->mem_pointer = temp;
-+	d_blob->redblob = temp;
-+	d_blob->data = d_blob->redblob + d_blob->redblob_sz;
-+	memcpy(d_blob->redblob, p->blob, blob_len);
-+
-+	ret = caam_securekey_desc_init(dev, req);
-+
-+	if (ret) {
-+		pr_info("caam_securekey_desc_init: Failed\n");
-+		goto out;
-+	}
-+
-+	ret = sk_job_submit(dev, req);
-+	if (!ret) {
-+		/*Copy output to key buffer. */
-+		p->key_len = d_blob->data_sz;
-+		memcpy(p->key, d_blob->data, p->key_len);
-+	} else {
-+		ret = -EINVAL;
-+	}
-+
-+out:
-+	if (temp)
-+		kfree(temp);
-+	if (req)
-+		kfree(req);
-+	return ret;
-+}
-+EXPORT_SYMBOL(key_deblob);
-+
-+/* key_blob(struct secure_key_payload *p, enum sk_req_type encap_type,
-+ *		struct device *dev)
-+ * To blobify the key data to get the blob. This blob can only be seen by
-+ * userspace.
-+ * param[in] p pointer to the secure key payload
-+ * param[in] decap_type operation to be done.
-+ * param[in] dev dev Pointer to job ring device structure
-+ * If operation is successful return 0, otherwise error.
-+ */
-+int key_blob(struct secure_key_payload *p, enum sk_req_type encap_type,
-+	     struct device *dev)
-+{
-+	unsigned int key_len;
-+	struct sk_red_blob_encap *k_blob;
-+	struct sk_req *req = NULL;
-+	int total_sz = 0, *temp = NULL, ret = 0;
-+
-+	req = kmalloc(sizeof(struct sk_req), GFP_DMA);
-+	if (!req) {
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+
-+	key_len = p->key_len;
-+
-+	req->type = encap_type;
-+	k_blob = &(req->req_u.sk_red_blob_encap);
-+
-+	/*
-+	 * Data_sz i.e. key len and the corresponding blob_len is
-+	 * key_len + BLOB header size.
-+	 */
-+
-+	k_blob->data_sz = key_len;
-+	k_blob->redblob_sz = key_len + SK_BLOB_KEY_SZ + SK_BLOB_MAC_SZ;
-+	total_sz = k_blob->data_sz + k_blob->redblob_sz;
-+
-+	temp = kmalloc(total_sz, GFP_DMA);
-+	if (!temp) {
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+
-+	req->mem_pointer = temp;
-+	k_blob->data = temp;
-+
-+	k_blob->redblob = k_blob->data + k_blob->data_sz;
-+	memcpy(k_blob->data, p->key, key_len);
-+
-+	ret = caam_securekey_desc_init(dev, req);
-+
-+	if (ret) {
-+		pr_info("caam_securekey_desc_init failed\n");
-+		goto out;
-+	}
-+
-+	ret = sk_job_submit(dev, req);
-+	if (!ret) {
-+		/*Copy output to key buffer. */
-+		p->blob_len = k_blob->redblob_sz;
-+		memcpy(p->blob, k_blob->redblob, p->blob_len);
-+	} else {
-+		ret = -EINVAL;
-+	}
-+
-+out:
-+	if (temp)
-+		kfree(req->mem_pointer);
-+	if (req)
-+		kfree(req);
-+	return ret;
-+
-+}
-+EXPORT_SYMBOL(key_blob);
---- /dev/null
-+++ b/security/keys/securekey_desc.h
-@@ -0,0 +1,141 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright 2018 NXP
-+ *
-+ */
-+#ifndef _SECUREKEY_DESC_H_
-+#define _SECUREKEY_DESC_H_
-+
-+#include "compat.h"
-+#include "regs.h"
-+#include "intern.h"
-+#include "desc.h"
-+#include "desc_constr.h"
-+#include "jr.h"
-+#include "error.h"
-+#include "pdb.h"
-+
-+#define SK_BLOB_KEY_SZ		32	/* Blob key size. */
-+#define SK_BLOB_MAC_SZ		16	/* Blob MAC size. */
-+
-+/*
-+ * brief defines different kinds of operations supported by this module.
-+ */
-+enum sk_req_type {
-+	sk_get_random,
-+	sk_red_blob_enc,
-+	sk_red_blob_dec,
-+};
-+
-+
-+/*
-+ * struct random_des
-+ * param[out] rnd_data output buffer for random data.
-+ */
-+struct random_desc {
-+	dma_addr_t rnd_data;
-+};
-+
-+/* struct redblob_encap_desc
-+ * details Structure containing dma address for redblob encapsulation.
-+ * param[in] in_data input data to redblob encap descriptor.
-+ * param[out] redblob output buffer for redblob.
-+ */
-+struct redblob_encap_desc {
-+	dma_addr_t in_data;
-+	dma_addr_t redblob;
-+};
-+
-+/* struct redblob_decap_desc
-+ * details Structure containing dma address for redblob decapsulation.
-+ * param[in] redblob input buffer to redblob decap descriptor.
-+ * param[out] out_data output data from redblob decap descriptor.
-+ */
-+struct redblob_decap_desc {
-+	dma_addr_t redblob;
-+	dma_addr_t out_data;
-+};
-+
-+/* struct sk_desc
-+ * details Structure for securekey descriptor creation.
-+ * param[in] req_type operation supported.
-+ * param[in] dma_u union of struct for supported operation.
-+ */
-+struct sk_desc {
-+	u32 req_type;
-+	union {
-+		struct redblob_encap_desc redblob_encapdesc;
-+		struct redblob_decap_desc redblob_decapdesc;
-+		struct random_desc random_descp;
-+	} dma_u;
-+};
-+
-+/* struct sk_fetch_rnd_data
-+ * decriptor structure containing key length.
-+ */
-+struct sk_fetch_rnd_data {
-+	void *data;
-+	size_t key_len;
-+};
-+
-+/* struct sk_red_blob_encap
-+ * details Structure containing buffer pointers for redblob encapsulation.
-+ * param[in] data Input data.
-+ * param[in] data_sz size of Input data.
-+ * param[out] redblob output buffer for redblob.
-+ * param[in] redblob_sz size of redblob.
-+ */
-+struct sk_red_blob_encap {
-+	void *data;
-+	uint32_t data_sz;
-+	void *redblob;
-+	uint32_t redblob_sz;
-+};
-+
-+/* struct sk_red_blob_decap
-+ * details Structure containing buffer pointers for redblob decapsulation.
-+ * param[in] redblob Input redblob.
-+ * param[in] redblob_sz size of redblob.
-+ * param[out] data output buffer for data.
-+ * param[in] data_sz size of output data.
-+ */
-+struct sk_red_blob_decap {
-+	void *redblob;
-+	uint32_t redblob_sz;
-+	void *data;
-+	uint32_t data_sz;
-+};
-+
-+/* struct sk_req
-+ * details Structure for securekey request creation.
-+ * param[in] type operation supported.
-+ * param[in] req_u union of struct for supported operation.
-+ * param[out] ret return status of CAAM operation.
-+ * param[in] mem_pointer memory pointer for allocated kernel memory.
-+ * param[in] desc_pointer Pointer to securekey descriptor creation structure.
-+ * param[in] comp struct completion object.
-+ * param[in] hwdesc contains descriptor instructions.
-+ */
-+struct sk_req {
-+	enum sk_req_type type;
-+	void *arg;
-+	union {
-+		struct sk_red_blob_encap sk_red_blob_encap;
-+		struct sk_red_blob_decap sk_red_blob_decap;
-+		struct sk_fetch_rnd_data sk_fetch_rnd_data;
-+	} req_u;
-+	int ret;
-+	void *mem_pointer;
-+	void *desc_pointer;
-+	struct completion comp;
-+	u32 hwdesc[MAX_CAAM_DESCSIZE];
-+};
-+
-+int caam_get_random(struct secure_key_payload *p,  enum sk_req_type fetch_rnd,
-+		    struct device *dev);
-+int key_blob(struct secure_key_payload *p, enum sk_req_type encap_type,
-+	     struct device *dev);
-+int key_deblob(struct secure_key_payload *p, enum sk_req_type decap_type,
-+	       struct device *dev);
-+
-+#endif /*_SECUREKEY_DESC_H_*/
diff --git a/target/linux/layerscape/patches-5.4/810-keys-0002-encrypted_keys-Adds-support-for-secure-key-type-as-m.patch b/target/linux/layerscape/patches-5.4/810-keys-0002-encrypted_keys-Adds-support-for-secure-key-type-as-m.patch
deleted file mode 100644
index 3a354e1fa8..0000000000
--- a/target/linux/layerscape/patches-5.4/810-keys-0002-encrypted_keys-Adds-support-for-secure-key-type-as-m.patch
+++ /dev/null
@@ -1,162 +0,0 @@
-From a8b1717089d6d215a48bb2816dff4a02376f3d16 Mon Sep 17 00:00:00 2001
-From: Udit Agarwal <udit.agarwal@nxp.com>
-Date: Wed, 4 Jul 2018 11:24:49 +0530
-Subject: [PATCH] encrypted_keys: Adds support for secure key-type as master
- key.
-
-Encrypted keys can use secure key-type as master key along with
-trusted/user keys.
-
-Secure key as master key uses, secure key type payload derieved
-using CAAM hardware.
-
-Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
-Reviewed-by: Sahil Malhotra <sahil.malhotra@nxp.com>
----
- MAINTAINERS                                     |  1 +
- security/keys/encrypted-keys/Makefile           |  2 ++
- security/keys/encrypted-keys/encrypted.c        | 13 +++++++--
- security/keys/encrypted-keys/encrypted.h        | 13 +++++++++
- security/keys/encrypted-keys/masterkey_secure.c | 37 +++++++++++++++++++++++++
- 5 files changed, 64 insertions(+), 2 deletions(-)
- create mode 100644 security/keys/encrypted-keys/masterkey_secure.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -9085,6 +9085,7 @@ F:	include/keys/secure-type.h
- F:	security/keys/secure_key.c
- F:	security/keys/securekey_desc.c
- F:	security/keys/securekey_desc.h
-+F:	security/keys/encrypted-keys/masterkey_secure.c
- 
- KEYS/KEYRINGS:
- M:	David Howells <dhowells@redhat.com>
---- a/security/keys/encrypted-keys/Makefile
-+++ b/security/keys/encrypted-keys/Makefile
-@@ -7,5 +7,7 @@ obj-$(CONFIG_ENCRYPTED_KEYS) += encrypte
- 
- encrypted-keys-y := encrypted.o ecryptfs_format.o
- masterkey-$(CONFIG_TRUSTED_KEYS) := masterkey_trusted.o
-+masterkey-$(CONFIG_SECURE_KEYS) := masterkey_secure.o
- masterkey-$(CONFIG_TRUSTED_KEYS)-$(CONFIG_ENCRYPTED_KEYS) := masterkey_trusted.o
-+masterkey-$(CONFIG_SECURE_KEYS)-$(CONFIG_ENCRYPTED_KEYS) := masterkey_secure.o
- encrypted-keys-y += $(masterkey-y) $(masterkey-m-m)
---- a/security/keys/encrypted-keys/encrypted.c
-+++ b/security/keys/encrypted-keys/encrypted.c
-@@ -36,6 +36,7 @@
- #include "ecryptfs_format.h"
- 
- static const char KEY_TRUSTED_PREFIX[] = "trusted:";
-+static const char KEY_SECURE_PREFIX[] = "secure:";
- static const char KEY_USER_PREFIX[] = "user:";
- static const char hash_alg[] = "sha256";
- static const char hmac_alg[] = "hmac(sha256)";
-@@ -47,6 +48,7 @@ static unsigned int ivsize;
- static int blksize;
- 
- #define KEY_TRUSTED_PREFIX_LEN (sizeof (KEY_TRUSTED_PREFIX) - 1)
-+#define KEY_SECURE_PREFIX_LEN (sizeof(KEY_SECURE_PREFIX) - 1)
- #define KEY_USER_PREFIX_LEN (sizeof (KEY_USER_PREFIX) - 1)
- #define KEY_ECRYPTFS_DESC_LEN 16
- #define HASH_SIZE SHA256_DIGEST_SIZE
-@@ -125,7 +127,7 @@ static int valid_ecryptfs_desc(const cha
- /*
-  * valid_master_desc - verify the 'key-type:desc' of a new/updated master-key
-  *
-- * key-type:= "trusted:" | "user:"
-+ * key-type:= "trusted:" | "user:" | "secure:"
-  * desc:= master-key description
-  *
-  * Verify that 'key-type' is valid and that 'desc' exists. On key update,
-@@ -140,6 +142,8 @@ static int valid_master_desc(const char
- 
- 	if (!strncmp(new_desc, KEY_TRUSTED_PREFIX, KEY_TRUSTED_PREFIX_LEN))
- 		prefix_len = KEY_TRUSTED_PREFIX_LEN;
-+	else if (!strncmp(new_desc, KEY_SECURE_PREFIX, KEY_SECURE_PREFIX_LEN))
-+		prefix_len = KEY_SECURE_PREFIX_LEN;
- 	else if (!strncmp(new_desc, KEY_USER_PREFIX, KEY_USER_PREFIX_LEN))
- 		prefix_len = KEY_USER_PREFIX_LEN;
- 	else
-@@ -358,7 +362,7 @@ static int calc_hmac(u8 *digest, const u
- 
- enum derived_key_type { ENC_KEY, AUTH_KEY };
- 
--/* Derive authentication/encryption key from trusted key */
-+/* Derive authentication/encryption key from trusted/secure key */
- static int get_derived_key(u8 *derived_key, enum derived_key_type key_type,
- 			   const u8 *master_key, size_t master_keylen)
- {
-@@ -429,6 +433,11 @@ static struct key *request_master_key(st
- 		mkey = request_trusted_key(epayload->master_desc +
- 					   KEY_TRUSTED_PREFIX_LEN,
- 					   master_key, master_keylen);
-+	} else if (!strncmp(epayload->master_desc, KEY_SECURE_PREFIX,
-+			    KEY_SECURE_PREFIX_LEN)) {
-+		mkey = request_secure_key(epayload->master_desc +
-+					  KEY_SECURE_PREFIX_LEN,
-+					  master_key, master_keylen);
- 	} else if (!strncmp(epayload->master_desc, KEY_USER_PREFIX,
- 			    KEY_USER_PREFIX_LEN)) {
- 		mkey = request_user_key(epayload->master_desc +
---- a/security/keys/encrypted-keys/encrypted.h
-+++ b/security/keys/encrypted-keys/encrypted.h
-@@ -16,6 +16,19 @@ static inline struct key *request_truste
- }
- #endif
- 
-+#if defined(CONFIG_SECURE_KEYS)
-+extern struct key *request_secure_key(const char *secure_desc,
-+				      const u8 **master_key,
-+				      size_t *master_keylen);
-+#else
-+static inline struct key *request_secure_key(const char *secure_desc,
-+					     const u8 **master_key,
-+					     size_t *master_keylen)
-+{
-+	return ERR_PTR(-EOPNOTSUPP);
-+}
-+#endif
-+
- #if ENCRYPTED_DEBUG
- static inline void dump_master_key(const u8 *master_key, size_t master_keylen)
- {
---- /dev/null
-+++ b/security/keys/encrypted-keys/masterkey_secure.c
-@@ -0,0 +1,37 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2018 NXP.
-+ *
-+ */
-+
-+#include <linux/uaccess.h>
-+#include <linux/module.h>
-+#include <linux/err.h>
-+#include <keys/secure-type.h>
-+#include <keys/encrypted-type.h>
-+#include "encrypted.h"
-+
-+/*
-+ * request_secure_key - request the secure key
-+ *
-+ * Secure keys and their blobs are derived from CAAM hardware.
-+ * Userspace manages secure  key-type data, but key data is not
-+ * visible in plain form. It is presented as blobs.
-+ */
-+struct key *request_secure_key(const char *secure_desc,
-+				const u8 **master_key, size_t *master_keylen)
-+{
-+	struct secure_key_payload *spayload;
-+	struct key *skey;
-+
-+	skey = request_key(&key_type_secure, secure_desc, NULL);
-+	if (IS_ERR(skey))
-+		goto error;
-+
-+	down_read(&skey->sem);
-+	spayload = skey->payload.data[0];
-+	*master_key = spayload->key;
-+	*master_keylen = spayload->key_len;
-+error:
-+	return skey;
-+}
diff --git a/target/linux/layerscape/patches-5.4/810-keys-0003-security-keys-secure_key-Fix-the-path-of-included-he.patch b/target/linux/layerscape/patches-5.4/810-keys-0003-security-keys-secure_key-Fix-the-path-of-included-he.patch
deleted file mode 100644
index c1f6081e4b..0000000000
--- a/target/linux/layerscape/patches-5.4/810-keys-0003-security-keys-secure_key-Fix-the-path-of-included-he.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 0dacdd2fb2f7a5ac016544ac9c4c5d29b81d6ffd Mon Sep 17 00:00:00 2001
-From: Shengzhou Liu <shengzhou.liu@nxp.com>
-Date: Thu, 9 Jan 2020 10:18:44 +0800
-Subject: [PATCH] security/keys/secure_key: Fix the path of included header
- file
-
-Fix the path of included header file.
-
-Signed-off-by: Shengzhou Liu <shengzhou.liu@nxp.com>
----
- security/keys/securekey_desc.h | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
---- a/security/keys/securekey_desc.h
-+++ b/security/keys/securekey_desc.h
-@@ -6,14 +6,14 @@
- #ifndef _SECUREKEY_DESC_H_
- #define _SECUREKEY_DESC_H_
- 
--#include "compat.h"
--#include "regs.h"
--#include "intern.h"
--#include "desc.h"
--#include "desc_constr.h"
--#include "jr.h"
--#include "error.h"
--#include "pdb.h"
-+#include "../../drivers/crypto/caam/compat.h"
-+#include "../../drivers/crypto/caam/regs.h"
-+#include "../../drivers/crypto/caam/intern.h"
-+#include "../../drivers/crypto/caam/desc.h"
-+#include "../../drivers/crypto/caam/desc_constr.h"
-+#include "../../drivers/crypto/caam/jr.h"
-+#include "../../drivers/crypto/caam/error.h"
-+#include "../../drivers/crypto/caam/pdb.h"
- 
- #define SK_BLOB_KEY_SZ		32	/* Blob key size. */
- #define SK_BLOB_MAC_SZ		16	/* Blob MAC size. */
diff --git a/target/linux/layerscape/patches-5.4/811-kvm-0001-arm64-KVM-support-flushing-device-memory.patch b/target/linux/layerscape/patches-5.4/811-kvm-0001-arm64-KVM-support-flushing-device-memory.patch
deleted file mode 100644
index 7c9bc079fc..0000000000
--- a/target/linux/layerscape/patches-5.4/811-kvm-0001-arm64-KVM-support-flushing-device-memory.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From aa9e99f77f92814a0d83af8e6ed3148458d0f611 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 26 Jul 2016 15:43:43 +0300
-Subject: [PATCH] arm64: KVM: support flushing device memory
-
-In the current implementation, trying to flush
-memory not covered by the linear map (e.g. device
-memory) causes a crash. Add support for flushing
-"non-normal" memory by explicitly ioremap()-ing
-it when such a case appears and do the cache flush
-through this temporary mapping.
-This allows dropping the special checks for qman
-cacheable region when doing cache flushes.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-[fixed formatting issue]
-Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
----
- arch/arm64/include/asm/kvm_mmu.h | 12 ++++++++++--
- 1 file changed, 10 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/include/asm/kvm_mmu.h
-+++ b/arch/arm64/include/asm/kvm_mmu.h
-@@ -341,8 +341,16 @@ static inline void __invalidate_icache_g
- static inline void __kvm_flush_dcache_pte(pte_t pte)
- {
- 	if (!cpus_have_const_cap(ARM64_HAS_STAGE2_FWB)) {
--		struct page *page = pte_page(pte);
--		kvm_flush_dcache_to_poc(page_address(page), PAGE_SIZE);
-+		if (pfn_valid(pte_pfn(pte))) {
-+			struct page *page = pte_page(pte);
-+
-+			kvm_flush_dcache_to_poc(page_address(page), PAGE_SIZE);
-+		} else {
-+			void __iomem *va = ioremap_cache_ns(pte_pfn(pte) << PAGE_SHIFT, PAGE_SIZE);
-+
-+			kvm_flush_dcache_to_poc(va, PAGE_SIZE);
-+			iounmap(va);
-+		}
- 	}
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/811-kvm-0002-arm-arm64-KVM-allow-specifying-s2-prot-bits-when-map.patch b/target/linux/layerscape/patches-5.4/811-kvm-0002-arm-arm64-KVM-allow-specifying-s2-prot-bits-when-map.patch
deleted file mode 100644
index bdc8725399..0000000000
--- a/target/linux/layerscape/patches-5.4/811-kvm-0002-arm-arm64-KVM-allow-specifying-s2-prot-bits-when-map.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 7a291e75b7793f1fbd0ad9ad39ae35a2b091d84b Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 26 Jul 2016 16:12:30 +0300
-Subject: [PATCH] arm/arm64 KVM: allow specifying s2 prot bits when mapping i/o
-
-Add parameter allowing to specify s2 page table
-protection and type bits and update the callers
-accordingly.
-The parameter will be used in a forthcoming patch.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
----
- arch/arm/include/asm/kvm_mmu.h   | 3 ++-
- arch/arm64/include/asm/kvm_mmu.h | 3 ++-
- virt/kvm/arm/mmu.c               | 8 +++++---
- virt/kvm/arm/vgic/vgic-v2.c      | 3 ++-
- 4 files changed, 11 insertions(+), 6 deletions(-)
-
---- a/arch/arm/include/asm/kvm_mmu.h
-+++ b/arch/arm/include/asm/kvm_mmu.h
-@@ -55,7 +55,8 @@ void stage2_unmap_vm(struct kvm *kvm);
- int kvm_alloc_stage2_pgd(struct kvm *kvm);
- void kvm_free_stage2_pgd(struct kvm *kvm);
- int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
--			  phys_addr_t pa, unsigned long size, bool writable);
-+			  phys_addr_t pa, unsigned long size, bool writable,
-+			  pgprot_t prot);
- 
- int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run);
- 
---- a/arch/arm64/include/asm/kvm_mmu.h
-+++ b/arch/arm64/include/asm/kvm_mmu.h
-@@ -156,7 +156,8 @@ void stage2_unmap_vm(struct kvm *kvm);
- int kvm_alloc_stage2_pgd(struct kvm *kvm);
- void kvm_free_stage2_pgd(struct kvm *kvm);
- int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
--			  phys_addr_t pa, unsigned long size, bool writable);
-+			  phys_addr_t pa, unsigned long size, bool writable,
-+			  pgprot_t prot);
- 
- int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run);
- 
---- a/virt/kvm/arm/mmu.c
-+++ b/virt/kvm/arm/mmu.c
-@@ -1341,9 +1341,11 @@ static int stage2_pudp_test_and_clear_yo
-  * @guest_ipa:	The IPA at which to insert the mapping
-  * @pa:		The physical address of the device
-  * @size:	The size of the mapping
-+ * @prot:	S2 page translation bits
-  */
- int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
--			  phys_addr_t pa, unsigned long size, bool writable)
-+			  phys_addr_t pa, unsigned long size, bool writable,
-+			  pgprot_t prot)
- {
- 	phys_addr_t addr, end;
- 	int ret = 0;
-@@ -1354,7 +1356,7 @@ int kvm_phys_addr_ioremap(struct kvm *kv
- 	pfn = __phys_to_pfn(pa);
- 
- 	for (addr = guest_ipa; addr < end; addr += PAGE_SIZE) {
--		pte_t pte = kvm_pfn_pte(pfn, PAGE_S2_DEVICE);
-+		pte_t pte = kvm_pfn_pte(pfn, prot);
- 
- 		if (writable)
- 			pte = kvm_s2pte_mkwrite(pte);
-@@ -2361,7 +2363,7 @@ int kvm_arch_prepare_memory_region(struc
- 
- 			ret = kvm_phys_addr_ioremap(kvm, gpa, pa,
- 						    vm_end - vm_start,
--						    writable);
-+						    writable, PAGE_S2_DEVICE);
- 			if (ret)
- 				break;
- 		}
---- a/virt/kvm/arm/vgic/vgic-v2.c
-+++ b/virt/kvm/arm/vgic/vgic-v2.c
-@@ -341,7 +341,8 @@ int vgic_v2_map_resources(struct kvm *kv
- 	if (!static_branch_unlikely(&vgic_v2_cpuif_trap)) {
- 		ret = kvm_phys_addr_ioremap(kvm, dist->vgic_cpu_base,
- 					    kvm_vgic_global_state.vcpu_base,
--					    KVM_VGIC_V2_CPU_SIZE, true);
-+					    KVM_VGIC_V2_CPU_SIZE, true,
-+					    PAGE_S2_DEVICE);
- 		if (ret) {
- 			kvm_err("Unable to remap VGIC CPU to VCPU\n");
- 			goto out;
diff --git a/target/linux/layerscape/patches-5.4/811-kvm-0003-arm-arm64-KVM-drop-qman-mmio-cacheable-mapping-hack.patch b/target/linux/layerscape/patches-5.4/811-kvm-0003-arm-arm64-KVM-drop-qman-mmio-cacheable-mapping-hack.patch
deleted file mode 100644
index 1b36b61e62..0000000000
--- a/target/linux/layerscape/patches-5.4/811-kvm-0003-arm-arm64-KVM-drop-qman-mmio-cacheable-mapping-hack.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-From d637252f72998261c9d77c0be57317c73ad77f83 Mon Sep 17 00:00:00 2001
-From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-Date: Tue, 26 Jul 2016 16:38:18 +0300
-Subject: [PATCH] arm/arm64: KVM: drop qman mmio cacheable mapping hack
-
-Instead of hardcoding checks for qman cacheable
-mmio region physical addresses extract mapping
-information from the user-space mapping.
-The involves several steps;
- - get access to a pte part of the user-space mapping
-   by using get_locked_pte() / pte_unmap_unlock() apis
- - extract memtype (normal / device), shareability from
-   the pte
- - convert to S2 translation bits in newly added
-   function stage1_to_stage2_pgprot()
- - finish making the s2 translation with the obtained bits
-
-Another explored option was using vm_area_struct::vm_page_prot
-which is set in vfio-mc mmap code to the correct page bits.
-However, experiments show that these bits are later altered
-in the generic mmap code (e.g. the shareability bit is always
-set on arm64).
-The only place where the original bits can still be found
-is the user-space mapping, using the method described above.
-
-Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
-[Bharat - Fixed mem_type check issue]
-[changed "ifdef ARM64" to CONFIG_ARM64]
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-[Ioana - added a sanity check for hugepages]
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-[Fixed format issues]
-Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
----
- virt/kvm/arm/mmu.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++++++++--
- 1 file changed, 53 insertions(+), 2 deletions(-)
-
---- a/virt/kvm/arm/mmu.c
-+++ b/virt/kvm/arm/mmu.c
-@@ -1381,6 +1381,30 @@ out:
- 	return ret;
- }
- 
-+#ifdef CONFIG_ARM64
-+static pgprot_t stage1_to_stage2_pgprot(pgprot_t prot)
-+{
-+	switch (pgprot_val(prot) & PTE_ATTRINDX_MASK) {
-+	case PTE_ATTRINDX(MT_DEVICE_nGnRE):
-+	case PTE_ATTRINDX(MT_DEVICE_nGnRnE):
-+	case PTE_ATTRINDX(MT_DEVICE_GRE):
-+		return PAGE_S2_DEVICE;
-+	case PTE_ATTRINDX(MT_NORMAL_NC):
-+	case PTE_ATTRINDX(MT_NORMAL):
-+		return (pgprot_val(prot) & PTE_SHARED)
-+			? PAGE_S2
-+			: PAGE_S2_NS;
-+	}
-+
-+	return PAGE_S2_DEVICE;
-+}
-+#else
-+static pgprot_t stage1_to_stage2_pgprot(pgprot_t prot)
-+{
-+	return PAGE_S2_DEVICE;
-+}
-+#endif
-+
- static bool transparent_hugepage_adjust(kvm_pfn_t *pfnp, phys_addr_t *ipap)
- {
- 	kvm_pfn_t pfn = *pfnp;
-@@ -1725,8 +1749,23 @@ static int user_mem_abort(struct kvm_vcp
- 	 * 3 levels, i.e, PMD is not folded.
- 	 */
- 	if (vma_pagesize == PMD_SIZE ||
--	    (vma_pagesize == PUD_SIZE && kvm_stage2_has_pmd(kvm)))
-+	    (vma_pagesize == PUD_SIZE && kvm_stage2_has_pmd(kvm))) {
- 		gfn = (fault_ipa & huge_page_mask(hstate_vma(vma))) >> PAGE_SHIFT;
-+	} else {
-+		if (!is_vm_hugetlb_page(vma)) {
-+			pte_t *pte;
-+			spinlock_t *ptl;
-+			pgprot_t prot;
-+
-+			pte = get_locked_pte(current->mm, memslot->userspace_addr, &ptl);
-+			prot = stage1_to_stage2_pgprot(__pgprot(pte_val(*pte)));
-+			pte_unmap_unlock(pte, ptl);
-+#ifdef CONFIG_ARM64
-+			if (pgprot_val(prot) == pgprot_val(PAGE_S2_NS))
-+				mem_type = PAGE_S2_NS;
-+#endif
-+		}
-+	}
- 	up_read(&current->mm->mmap_sem);
- 
- 	/* We need minimum second+third level pages */
-@@ -1755,6 +1794,11 @@ static int user_mem_abort(struct kvm_vcp
- 	if (is_error_noslot_pfn(pfn))
- 		return -EFAULT;
- 
-+#ifdef CONFIG_ARM64
-+	if (pgprot_val(mem_type) == pgprot_val(PAGE_S2_NS)) {
-+		flags |= KVM_S2PTE_FLAG_IS_IOMAP;
-+	} else
-+#endif
- 	if (kvm_is_device_pfn(pfn)) {
- 		mem_type = PAGE_S2_DEVICE;
- 		flags |= KVM_S2PTE_FLAG_IS_IOMAP;
-@@ -2351,6 +2395,9 @@ int kvm_arch_prepare_memory_region(struc
- 			gpa_t gpa = mem->guest_phys_addr +
- 				    (vm_start - mem->userspace_addr);
- 			phys_addr_t pa;
-+			pgprot_t prot;
-+			pte_t *pte;
-+			spinlock_t *ptl;
- 
- 			pa = (phys_addr_t)vma->vm_pgoff << PAGE_SHIFT;
- 			pa += vm_start - vma->vm_start;
-@@ -2361,9 +2408,13 @@ int kvm_arch_prepare_memory_region(struc
- 				goto out;
- 			}
- 
-+			pte = get_locked_pte(current->mm, mem->userspace_addr, &ptl);
-+			prot = stage1_to_stage2_pgprot(__pgprot(pte_val(*pte)));
-+			pte_unmap_unlock(pte, ptl);
-+
- 			ret = kvm_phys_addr_ioremap(kvm, gpa, pa,
- 						    vm_end - vm_start,
--						    writable, PAGE_S2_DEVICE);
-+						    writable, prot);
- 			if (ret)
- 				break;
- 		}
diff --git a/target/linux/layerscape/patches-5.4/811-kvm-0004-virt-vgic-Increase-number-of-DeviceIDs-to-17.patch b/target/linux/layerscape/patches-5.4/811-kvm-0004-virt-vgic-Increase-number-of-DeviceIDs-to-17.patch
deleted file mode 100644
index 0c55bf9942..0000000000
--- a/target/linux/layerscape/patches-5.4/811-kvm-0004-virt-vgic-Increase-number-of-DeviceIDs-to-17.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From d157696b1761a710499207c6011a611a5c76826f Mon Sep 17 00:00:00 2001
-From: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Date: Thu, 25 Jan 2018 10:28:53 +0000
-Subject: [PATCH] virt/vgic: Increase number of DeviceIDs to 17
-
-FSL-MC bus devices uses device-ids from 0x10000 to 0x20000.
-So to support MSI interrupts for mc-bus devices we need
-vgi-ITS device-id table of size 2^17 to support deviceid
-range from 0x10000 to 0x20000.
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
----
- virt/kvm/arm/vgic/vgic-its.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/virt/kvm/arm/vgic/vgic-its.c
-+++ b/virt/kvm/arm/vgic/vgic-its.c
-@@ -248,7 +248,7 @@ static struct its_ite *find_ite(struct v
- #define GIC_LPI_OFFSET 8192
- 
- #define VITS_TYPER_IDBITS 16
--#define VITS_TYPER_DEVBITS 16
-+#define VITS_TYPER_DEVBITS 17
- #define VITS_DTE_MAX_DEVID_OFFSET	(BIT(14) - 1)
- #define VITS_ITE_MAX_EVENTID_OFFSET	(BIT(16) - 1)
- 
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0001-PCI-layerscape-Add-LS1028a-support.patch b/target/linux/layerscape/patches-5.4/812-pcie-0001-PCI-layerscape-Add-LS1028a-support.patch
deleted file mode 100644
index 4e7cdb3540..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0001-PCI-layerscape-Add-LS1028a-support.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From f4980947debc7865bd923d60bf36d6fb0b80ecc5 Mon Sep 17 00:00:00 2001
-From: Xiaowei Bao <xiaowei.bao@nxp.com>
-Date: Fri, 23 Aug 2019 16:26:43 +0800
-Subject: [PATCH] PCI: layerscape: Add LS1028a support
-
-Add support for the LS1028a PCIe controller.
-
-Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
----
- drivers/pci/controller/dwc/pci-layerscape.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/pci/controller/dwc/pci-layerscape.c
-+++ b/drivers/pci/controller/dwc/pci-layerscape.c
-@@ -263,6 +263,7 @@ static const struct ls_pcie_drvdata ls20
- static const struct of_device_id ls_pcie_of_match[] = {
- 	{ .compatible = "fsl,ls1012a-pcie", .data = &ls1046_drvdata },
- 	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata },
-+	{ .compatible = "fsl,ls1028a-pcie", .data = &ls2088_drvdata },
- 	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata },
- 	{ .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata },
- 	{ .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata },
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0002-PCI-dwc-Use-interrupt-disabling-instead-of-masking.patch b/target/linux/layerscape/patches-5.4/812-pcie-0002-PCI-dwc-Use-interrupt-disabling-instead-of-masking.patch
deleted file mode 100644
index 3990c1597b..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0002-PCI-dwc-Use-interrupt-disabling-instead-of-masking.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From c89d85a39df353290ea7af84a32d5ca692a3c27a Mon Sep 17 00:00:00 2001
-From: Fugang Duan <fugang.duan@nxp.com>
-Date: Sat, 2 Nov 2019 15:51:40 +0800
-Subject: [PATCH] PCI: dwc: Use interrupt disabling instead of masking
-
-commit 830920e065e9("PCI: dwc: Use interrupt masking instead
-of disabling") break i.MX platform PCIe suspend/resume when
-MSI enabled.
-
-Revert the commit to keep orinigal method that using interrupt
-disabling instead of masking.
-
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
----
- drivers/pci/controller/dwc/pcie-designware-host.c | 19 +++++++------------
- 1 file changed, 7 insertions(+), 12 deletions(-)
-
---- a/drivers/pci/controller/dwc/pcie-designware-host.c
-+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
-@@ -157,8 +157,8 @@ static void dw_pci_bottom_mask(struct ir
- 	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
- 
- 	pp->irq_mask[ctrl] |= BIT(bit);
--	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
--			    pp->irq_mask[ctrl]);
-+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
-+			    ~pp->irq_mask[ctrl]);
- 
- 	raw_spin_unlock_irqrestore(&pp->lock, flags);
- }
-@@ -176,8 +176,8 @@ static void dw_pci_bottom_unmask(struct
- 	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
- 
- 	pp->irq_mask[ctrl] &= ~BIT(bit);
--	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
--			    pp->irq_mask[ctrl]);
-+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
-+			    ~pp->irq_mask[ctrl]);
- 
- 	raw_spin_unlock_irqrestore(&pp->lock, flags);
- }
-@@ -659,15 +659,10 @@ void dw_pcie_setup_rc(struct pcie_port *
- 		num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
- 
- 		/* Initialize IRQ Status array */
--		for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
--			pp->irq_mask[ctrl] = ~0;
--			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK +
-+		for (ctrl = 0; ctrl < num_ctrls; ctrl++)
-+			dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE +
- 					    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
--					    4, pp->irq_mask[ctrl]);
--			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE +
--					    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
--					    4, ~0);
--		}
-+					    4, &pp->irq_mask[ctrl]);
- 	}
- 
- 	/* Setup RC BARs */
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0003-PCI-dwc-fix-the-msi-failure-after-pm-operations.patch b/target/linux/layerscape/patches-5.4/812-pcie-0003-PCI-dwc-fix-the-msi-failure-after-pm-operations.patch
deleted file mode 100644
index 91b2a34b3f..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0003-PCI-dwc-fix-the-msi-failure-after-pm-operations.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From f5db8274c8d6c86812fd2036ae49153d3ade3eaa Mon Sep 17 00:00:00 2001
-From: richard zhu <hongxing.zhu@nxp.com>
-Date: Wed, 6 Nov 2019 15:11:36 +0800
-Subject: [PATCH] PCI: dwc: fix the msi failure after pm operations
-
-The controller may be powered off (Link is in L3) during the suspend
-mode. The MSI_ADDR would be missed after resume and MSI function
-would be failed.
-Re-store MSI_ADDR to fix the MSI failure after PM operations.
-
-Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
-Acked-by: Fugang Duan <fugang.duan@nxp.com>
-Acked-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
----
- drivers/pci/controller/dwc/pcie-designware-host.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/pci/controller/dwc/pcie-designware-host.c
-+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
-@@ -656,6 +656,12 @@ void dw_pcie_setup_rc(struct pcie_port *
- 	dw_pcie_setup(pci);
- 
- 	if (!pp->ops->msi_host_init) {
-+		/* Program the msi_data */
-+		dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4,
-+				    lower_32_bits((u64)pp->msi_data));
-+		dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4,
-+				    upper_32_bits((u64)pp->msi_data));
-+
- 		num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
- 
- 		/* Initialize IRQ Status array */
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0004-pci-add-support-aer-pme-interrupts-with-none-MSI-MSI.patch b/target/linux/layerscape/patches-5.4/812-pcie-0004-pci-add-support-aer-pme-interrupts-with-none-MSI-MSI.patch
deleted file mode 100644
index 9c359d24b9..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0004-pci-add-support-aer-pme-interrupts-with-none-MSI-MSI.patch
+++ /dev/null
@@ -1,239 +0,0 @@
-From dc17fd4b8c27ca47fb5d9113df715579bc4a04a3 Mon Sep 17 00:00:00 2001
-From: Po Liu <po.liu@nxp.com>
-Date: Fri, 30 Sep 2016 17:11:37 +0800
-Subject: [PATCH] pci:add support aer/pme interrupts with none MSI/MSI-X/INTx
- mode
-
-On some platforms, root port doesn't support MSI/MSI-X/INTx in RC mode.
-When chip support the aer/pme interrupts with none MSI/MSI-X/INTx mode,
-maybe there is interrupt line for aer pme etc. Search the interrupt
-number in the fdt file. Then fixup the dev->irq with it.
-
-Signed-off-by: Po Liu <po.liu@nxp.com>
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
----
- .../devicetree/bindings/pci/layerscape-pci.txt     | 13 +++++--
- arch/arm/kernel/bios32.c                           | 44 ++++++++++++++++++++++
- arch/arm64/kernel/pci.c                            | 44 ++++++++++++++++++++++
- drivers/pci/pcie/portdrv_core.c                    | 29 ++++++++++++++
- include/linux/pci.h                                |  1 +
- 5 files changed, 127 insertions(+), 4 deletions(-)
-
---- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
-+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
-@@ -26,8 +26,12 @@ Required properties:
- - reg: base addresses and lengths of the PCIe controller register blocks.
- - interrupts: A list of interrupt outputs of the controller. Must contain an
-   entry for each entry in the interrupt-names property.
--- interrupt-names: Must include the following entries:
--  "intr": The interrupt that is asserted for controller interrupts
-+- interrupt-names: It could include the following entries:
-+  "aer": Asserted for aer interrupt when chip support the aer interrupt with
-+		 none MSI/MSI-X/INTx mode,but there is interrupt line for aer.
-+  "pme": Asserted for pme interrupt when chip support the pme interrupt with
-+		 none MSI/MSI-X/INTx mode,but there is interrupt line for pme.
-+  ......
- - fsl,pcie-scfg: Must include two entries.
-   The first entry must be a link to the SCFG device node
-   The second entry must be '0' or '1' based on physical PCIe controller index.
-@@ -43,8 +47,9 @@ Example:
- 		reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
- 		       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
- 		reg-names = "regs", "config";
--		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
--		interrupt-names = "intr";
-+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, /* aer interrupt */
-+			<GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* pme interrupt */
-+		interrupt-names = "aer", "pme";
- 		fsl,pcie-scfg = <&scfg 0>;
- 		#address-cells = <3>;
- 		#size-cells = <2>;
---- a/arch/arm/kernel/bios32.c
-+++ b/arch/arm/kernel/bios32.c
-@@ -12,11 +12,14 @@
- #include <linux/slab.h>
- #include <linux/init.h>
- #include <linux/io.h>
-+#include <linux/of_irq.h>
- 
- #include <asm/mach-types.h>
- #include <asm/mach/map.h>
- #include <asm/mach/pci.h>
- 
-+#include "../../../drivers/pci/pcie/portdrv.h"
-+
- static int debug_pci;
- 
- /*
-@@ -65,6 +68,47 @@ void pcibios_report_status(u_int status_
- }
- 
- /*
-+ * Check device tree if the service interrupts are there
-+ */
-+int pcibios_check_service_irqs(struct pci_dev *dev, int *irqs, int mask)
-+{
-+	int ret, count = 0;
-+	struct device_node *np = NULL;
-+
-+	if (dev->bus->dev.of_node)
-+		np = dev->bus->dev.of_node;
-+
-+	if (np == NULL)
-+		return 0;
-+
-+	if (!IS_ENABLED(CONFIG_OF_IRQ))
-+		return 0;
-+
-+	/* If root port doesn't support MSI/MSI-X/INTx in RC mode,
-+	 * request irq for aer
-+	 */
-+	if (mask & PCIE_PORT_SERVICE_AER) {
-+		ret = of_irq_get_byname(np, "aer");
-+		if (ret > 0) {
-+			irqs[PCIE_PORT_SERVICE_AER_SHIFT] = ret;
-+			count++;
-+		}
-+	}
-+
-+	if (mask & PCIE_PORT_SERVICE_PME) {
-+		ret = of_irq_get_byname(np, "pme");
-+		if (ret > 0) {
-+			irqs[PCIE_PORT_SERVICE_PME_SHIFT] = ret;
-+			count++;
-+		}
-+	}
-+
-+	/* TODO: add more service interrupts if there it is in the device tree*/
-+
-+	return count;
-+}
-+
-+/*
-  * We don't use this to fix the device, but initialisation of it.
-  * It's not the correct use for this, but it works.
-  * Note that the arbiter/ISA bridge appears to be buggy, specifically in
---- a/arch/arm64/kernel/pci.c
-+++ b/arch/arm64/kernel/pci.c
-@@ -13,11 +13,14 @@
- #include <linux/mm.h>
- #include <linux/of_pci.h>
- #include <linux/of_platform.h>
-+#include <linux/of_irq.h>
- #include <linux/pci.h>
- #include <linux/pci-acpi.h>
- #include <linux/pci-ecam.h>
- #include <linux/slab.h>
- 
-+#include "../../../drivers/pci/pcie/portdrv.h"
-+
- #ifdef CONFIG_ACPI
- /*
-  * Try to assign the IRQ number when probing a new device
-@@ -32,6 +35,47 @@ int pcibios_alloc_irq(struct pci_dev *de
- #endif
- 
- /*
-+ * Check device tree if the service interrupts are there
-+ */
-+int pcibios_check_service_irqs(struct pci_dev *dev, int *irqs, int mask)
-+{
-+	int ret, count = 0;
-+	struct device_node *np = NULL;
-+
-+	if (dev->bus->dev.of_node)
-+		np = dev->bus->dev.of_node;
-+
-+	if (np == NULL)
-+		return 0;
-+
-+	if (!IS_ENABLED(CONFIG_OF_IRQ))
-+		return 0;
-+
-+	/* If root port doesn't support MSI/MSI-X/INTx in RC mode,
-+	 * request irq for aer
-+	 */
-+	if (mask & PCIE_PORT_SERVICE_AER) {
-+		ret = of_irq_get_byname(np, "aer");
-+		if (ret > 0) {
-+			irqs[PCIE_PORT_SERVICE_AER_SHIFT] = ret;
-+			count++;
-+		}
-+	}
-+
-+	if (mask & PCIE_PORT_SERVICE_PME) {
-+		ret = of_irq_get_byname(np, "pme");
-+		if (ret > 0) {
-+			irqs[PCIE_PORT_SERVICE_PME_SHIFT] = ret;
-+			count++;
-+		}
-+	}
-+
-+	/* TODO: add more service interrupts if there it is in the device tree*/
-+
-+	return count;
-+}
-+
-+/*
-  * raw_pci_read/write - Platform-specific PCI config space access.
-  */
- int raw_pci_read(unsigned int domain, unsigned int bus,
---- a/drivers/pci/pcie/portdrv_core.c
-+++ b/drivers/pci/pcie/portdrv_core.c
-@@ -37,6 +37,20 @@ static void release_pcie_device(struct d
- 	kfree(to_pcie_device(dev));
- }
- 
-+/**
-+ * pcibios_check_service_irqs - check irqs in the device tree
-+ * @dev: PCI Express port to handle
-+ * @irqs: Array of irqs to populate
-+ * @mask: Bitmask of port capabilities returned by get_port_device_capability()
-+ *
-+ * Return value: 0 means no service irqs in the device tree
-+ *
-+ */
-+int __weak pcibios_check_service_irqs(struct pci_dev *dev, int *irqs, int mask)
-+{
-+	return 0;
-+}
-+
- /*
-  * Fill in *pme, *aer, *dpc with the relevant Interrupt Message Numbers if
-  * services are enabled in "mask".  Return the number of MSI/MSI-X vectors
-@@ -165,10 +179,25 @@ static int pcie_port_enable_irq_vec(stru
- static int pcie_init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
- {
- 	int ret, i;
-+	int irq = -1;
- 
- 	for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
- 		irqs[i] = -1;
- 
-+	/* Check if some platforms owns independent irq pins for AER/PME etc.
-+	 * Some platforms may own independent AER/PME interrupts and set
-+	 * them in the device tree file.
-+	 */
-+	ret = pcibios_check_service_irqs(dev, irqs, mask);
-+	if (ret) {
-+		if (dev->irq)
-+			irq = dev->irq;
-+		for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
-+			if (irqs[i] == -1)
-+				irqs[i] = irq;
-+		return 0;
-+	}
-+
- 	/*
- 	 * If we support PME but can't use MSI/MSI-X for it, we have to
- 	 * fall back to INTx or other interrupts, e.g., a system shared
---- a/include/linux/pci.h
-+++ b/include/linux/pci.h
-@@ -2024,6 +2024,7 @@ static inline void pcibios_penalize_isa_
- int pcibios_alloc_irq(struct pci_dev *dev);
- void pcibios_free_irq(struct pci_dev *dev);
- resource_size_t pcibios_default_alignment(void);
-+int pcibios_check_service_irqs(struct pci_dev *dev, int *irqs, int mask);
- 
- #ifdef CONFIG_HIBERNATE_CALLBACKS
- extern struct dev_pm_ops pcibios_pm_ops;
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0005-MLK-20684-PCI-Disable-MSI-on-CYW4356-and-CYW4359-chi.patch b/target/linux/layerscape/patches-5.4/812-pcie-0005-MLK-20684-PCI-Disable-MSI-on-CYW4356-and-CYW4359-chi.patch
deleted file mode 100644
index 09b5f9e548..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0005-MLK-20684-PCI-Disable-MSI-on-CYW4356-and-CYW4359-chi.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 852d91023cc24663e6b3b0707e98a189a7b1de87 Mon Sep 17 00:00:00 2001
-From: Andy Duan <fugang.duan@nxp.com>
-Date: Wed, 2 Jan 2019 17:55:44 +0800
-Subject: [PATCH] MLK-20684 PCI: Disable MSI on CYW4356 and CYW4359 chips
-
-MSI is broken on CYW4356/4359 chips. This causes CYW4356 1CX not
-work on i.MX8x platforms with bandwidth test. It is known issue
-that i.MX8x PCIe host driver MSI interrupt lost.
-
-Disable MSI completely for this chipset to let wifi can stable work
-until PCIe RC driver fix the issue.
-
-Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
-(cherry picked from commit d99766187fb99d4a6655a1e0fdf5dc9451a8e4a0)
----
- drivers/pci/quirks.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -2525,6 +2525,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VI
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi);
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi);
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, 0x0761, quirk_disable_all_msi);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x43ec, quirk_disable_all_msi);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x43ef, quirk_disable_all_msi);
- 
- /* Disable MSI on chipsets that are known to not support it */
- static void quirk_disable_msi(struct pci_dev *dev)
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0006-MLK-20716-PCI-add-quirk-for-cyw4356-to-disable-D3-mo.patch b/target/linux/layerscape/patches-5.4/812-pcie-0006-MLK-20716-PCI-add-quirk-for-cyw4356-to-disable-D3-mo.patch
deleted file mode 100644
index 1f9eb5c83c..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0006-MLK-20716-PCI-add-quirk-for-cyw4356-to-disable-D3-mo.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From c116c7d1393e5afdcbb2e4defd002bb3445f5708 Mon Sep 17 00:00:00 2001
-From: Andy Duan <fugang.duan@nxp.com>
-Date: Mon, 7 Jan 2019 18:45:41 +0800
-Subject: [PATCH] MLK-20716 PCI: add quirk for cyw4356 to disable D3 mode
-
-Add quirk for cyw4356 to disable D3 mode because current firmware
-still doesn't support D3 mode.
-
-Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
-Signed-off-by: Arulpandiyan Vadivel <arulpandiyan_vadivel@mentor.com>
-Signed-off-by: Shrikant Bobade <Shrikant_Bobade@mentor.com>
-(cherry picked from commit 22212c60d7fb067e28a2fed16914515e3d6d3950)
----
- drivers/pci/quirks.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -1357,6 +1357,10 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR
-    occur when mode detecting */
- DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID,
- 				PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
-+/* Quirk the CYW4356 WIFI chip because the firmware still doesn't support
-+   D3 mode */
-+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_BROADCOM, 0x43ec,
-+				PCI_CLASS_NETWORK_OTHER, 8, quirk_no_ata_d3);
- 
- /*
-  * This was originally an Alpha-specific thing, but it really fits here.
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0007-PCI-Disable-MSI-on-marvel-88w9098-and-88w8997-chips.patch b/target/linux/layerscape/patches-5.4/812-pcie-0007-PCI-Disable-MSI-on-marvel-88w9098-and-88w8997-chips.patch
deleted file mode 100644
index e163c7cf04..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0007-PCI-Disable-MSI-on-marvel-88w9098-and-88w8997-chips.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 086cbc69787a71693ef94aa97438b06631850ed5 Mon Sep 17 00:00:00 2001
-From: Fugang Duan <fugang.duan@nxp.com>
-Date: Mon, 4 Nov 2019 13:48:52 +0800
-Subject: [PATCH] PCI: Disable MSI on marvel 88w9098 and 88w8997 chips
-
-i.MX8x with MSI enable suspend/resume doesn't work for
-marvell 88w9098 and 88w8997 wlan chips, disable the feature
-before the issue fixed.
-
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
----
- drivers/pci/quirks.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -2531,6 +2531,9 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VI
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, 0x0761, quirk_disable_all_msi);
- DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x43ec, quirk_disable_all_msi);
- DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x43ef, quirk_disable_all_msi);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL_EXT, 0x2b42, quirk_disable_all_msi);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL_EXT, 0x2b43, quirk_disable_all_msi);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL_EXT, 0x2b44, quirk_disable_all_msi);
- 
- /* Disable MSI on chipsets that are known to not support it */
- static void quirk_disable_msi(struct pci_dev *dev)
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0008-Revert-PCI-mobiveil-Fix-csr_read-write-build-issue.patch b/target/linux/layerscape/patches-5.4/812-pcie-0008-Revert-PCI-mobiveil-Fix-csr_read-write-build-issue.patch
deleted file mode 100644
index f6ac0c467d..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0008-Revert-PCI-mobiveil-Fix-csr_read-write-build-issue.patch
+++ /dev/null
@@ -1,286 +0,0 @@
-From c3f16eeaa68f3be291dd62efadeb733d6d40279a Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Tue, 18 Feb 2020 09:13:00 +0800
-Subject: [PATCH] Revert "PCI: mobiveil: Fix csr_read()/write() build issue"
-
-This reverts commit 1865d6440fb63ad979d7034b2d7c94937bfd2200.
-
-PCI: mobiveil: Fix csr_read()/write() build issue
-
-[ Upstream commit 4906c05b87d44c19b225935e24d62e4480ca556d ]
----
- drivers/pci/controller/pcie-mobiveil.c | 119 ++++++++++++++++-----------------
- 1 file changed, 57 insertions(+), 62 deletions(-)
-
---- a/drivers/pci/controller/pcie-mobiveil.c
-+++ b/drivers/pci/controller/pcie-mobiveil.c
-@@ -235,7 +235,7 @@ static int mobiveil_pcie_write(void __io
- 	return PCIBIOS_SUCCESSFUL;
- }
- 
--static u32 mobiveil_csr_read(struct mobiveil_pcie *pcie, u32 off, size_t size)
-+static u32 csr_read(struct mobiveil_pcie *pcie, u32 off, size_t size)
- {
- 	void *addr;
- 	u32 val;
-@@ -250,8 +250,7 @@ static u32 mobiveil_csr_read(struct mobi
- 	return val;
- }
- 
--static void mobiveil_csr_write(struct mobiveil_pcie *pcie, u32 val, u32 off,
--			       size_t size)
-+static void csr_write(struct mobiveil_pcie *pcie, u32 val, u32 off, size_t size)
- {
- 	void *addr;
- 	int ret;
-@@ -263,19 +262,19 @@ static void mobiveil_csr_write(struct mo
- 		dev_err(&pcie->pdev->dev, "write CSR address failed\n");
- }
- 
--static u32 mobiveil_csr_readl(struct mobiveil_pcie *pcie, u32 off)
-+static u32 csr_readl(struct mobiveil_pcie *pcie, u32 off)
- {
--	return mobiveil_csr_read(pcie, off, 0x4);
-+	return csr_read(pcie, off, 0x4);
- }
- 
--static void mobiveil_csr_writel(struct mobiveil_pcie *pcie, u32 val, u32 off)
-+static void csr_writel(struct mobiveil_pcie *pcie, u32 val, u32 off)
- {
--	mobiveil_csr_write(pcie, val, off, 0x4);
-+	csr_write(pcie, val, off, 0x4);
- }
- 
- static bool mobiveil_pcie_link_up(struct mobiveil_pcie *pcie)
- {
--	return (mobiveil_csr_readl(pcie, LTSSM_STATUS) &
-+	return (csr_readl(pcie, LTSSM_STATUS) &
- 		LTSSM_STATUS_L0_MASK) == LTSSM_STATUS_L0;
- }
- 
-@@ -324,7 +323,7 @@ static void __iomem *mobiveil_pcie_map_b
- 		PCI_SLOT(devfn) << PAB_DEVICE_SHIFT |
- 		PCI_FUNC(devfn) << PAB_FUNCTION_SHIFT;
- 
--	mobiveil_csr_writel(pcie, value, PAB_AXI_AMAP_PEX_WIN_L(WIN_NUM_0));
-+	csr_writel(pcie, value, PAB_AXI_AMAP_PEX_WIN_L(WIN_NUM_0));
- 
- 	return pcie->config_axi_slave_base + where;
- }
-@@ -354,14 +353,13 @@ static void mobiveil_pcie_isr(struct irq
- 	chained_irq_enter(chip, desc);
- 
- 	/* read INTx status */
--	val = mobiveil_csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT);
--	mask = mobiveil_csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
-+	val = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT);
-+	mask = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
- 	intr_status = val & mask;
- 
- 	/* Handle INTx */
- 	if (intr_status & PAB_INTP_INTX_MASK) {
--		shifted_status = mobiveil_csr_readl(pcie,
--						    PAB_INTP_AMBA_MISC_STAT);
-+		shifted_status = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT);
- 		shifted_status &= PAB_INTP_INTX_MASK;
- 		shifted_status >>= PAB_INTX_START;
- 		do {
-@@ -375,13 +373,12 @@ static void mobiveil_pcie_isr(struct irq
- 							    bit);
- 
- 				/* clear interrupt handled */
--				mobiveil_csr_writel(pcie,
--						    1 << (PAB_INTX_START + bit),
--						    PAB_INTP_AMBA_MISC_STAT);
-+				csr_writel(pcie, 1 << (PAB_INTX_START + bit),
-+					   PAB_INTP_AMBA_MISC_STAT);
- 			}
- 
--			shifted_status = mobiveil_csr_readl(pcie,
--							    PAB_INTP_AMBA_MISC_STAT);
-+			shifted_status = csr_readl(pcie,
-+						   PAB_INTP_AMBA_MISC_STAT);
- 			shifted_status &= PAB_INTP_INTX_MASK;
- 			shifted_status >>= PAB_INTX_START;
- 		} while (shifted_status != 0);
-@@ -416,7 +413,7 @@ static void mobiveil_pcie_isr(struct irq
- 	}
- 
- 	/* Clear the interrupt status */
--	mobiveil_csr_writel(pcie, intr_status, PAB_INTP_AMBA_MISC_STAT);
-+	csr_writel(pcie, intr_status, PAB_INTP_AMBA_MISC_STAT);
- 	chained_irq_exit(chip, desc);
- }
- 
-@@ -477,24 +474,24 @@ static void program_ib_windows(struct mo
- 		return;
- 	}
- 
--	value = mobiveil_csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
-+	value = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
- 	value &= ~(AMAP_CTRL_TYPE_MASK << AMAP_CTRL_TYPE_SHIFT | WIN_SIZE_MASK);
- 	value |= type << AMAP_CTRL_TYPE_SHIFT | 1 << AMAP_CTRL_EN_SHIFT |
- 		 (lower_32_bits(size64) & WIN_SIZE_MASK);
--	mobiveil_csr_writel(pcie, value, PAB_PEX_AMAP_CTRL(win_num));
-+	csr_writel(pcie, value, PAB_PEX_AMAP_CTRL(win_num));
- 
--	mobiveil_csr_writel(pcie, upper_32_bits(size64),
--			    PAB_EXT_PEX_AMAP_SIZEN(win_num));
-+	csr_writel(pcie, upper_32_bits(size64),
-+		   PAB_EXT_PEX_AMAP_SIZEN(win_num));
- 
--	mobiveil_csr_writel(pcie, lower_32_bits(cpu_addr),
--			    PAB_PEX_AMAP_AXI_WIN(win_num));
--	mobiveil_csr_writel(pcie, upper_32_bits(cpu_addr),
--			    PAB_EXT_PEX_AMAP_AXI_WIN(win_num));
--
--	mobiveil_csr_writel(pcie, lower_32_bits(pci_addr),
--			    PAB_PEX_AMAP_PEX_WIN_L(win_num));
--	mobiveil_csr_writel(pcie, upper_32_bits(pci_addr),
--			    PAB_PEX_AMAP_PEX_WIN_H(win_num));
-+	csr_writel(pcie, lower_32_bits(cpu_addr),
-+		   PAB_PEX_AMAP_AXI_WIN(win_num));
-+	csr_writel(pcie, upper_32_bits(cpu_addr),
-+		   PAB_EXT_PEX_AMAP_AXI_WIN(win_num));
-+
-+	csr_writel(pcie, lower_32_bits(pci_addr),
-+		   PAB_PEX_AMAP_PEX_WIN_L(win_num));
-+	csr_writel(pcie, upper_32_bits(pci_addr),
-+		   PAB_PEX_AMAP_PEX_WIN_H(win_num));
- 
- 	pcie->ib_wins_configured++;
- }
-@@ -518,29 +515,27 @@ static void program_ob_windows(struct mo
- 	 * program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit
- 	 * to 4 KB in PAB_AXI_AMAP_CTRL register
- 	 */
--	value = mobiveil_csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num));
-+	value = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num));
- 	value &= ~(WIN_TYPE_MASK << WIN_TYPE_SHIFT | WIN_SIZE_MASK);
- 	value |= 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
- 		 (lower_32_bits(size64) & WIN_SIZE_MASK);
--	mobiveil_csr_writel(pcie, value, PAB_AXI_AMAP_CTRL(win_num));
-+	csr_writel(pcie, value, PAB_AXI_AMAP_CTRL(win_num));
- 
--	mobiveil_csr_writel(pcie, upper_32_bits(size64),
--			    PAB_EXT_AXI_AMAP_SIZE(win_num));
-+	csr_writel(pcie, upper_32_bits(size64), PAB_EXT_AXI_AMAP_SIZE(win_num));
- 
- 	/*
- 	 * program AXI window base with appropriate value in
- 	 * PAB_AXI_AMAP_AXI_WIN0 register
- 	 */
--	mobiveil_csr_writel(pcie,
--			    lower_32_bits(cpu_addr) & (~AXI_WINDOW_ALIGN_MASK),
--			    PAB_AXI_AMAP_AXI_WIN(win_num));
--	mobiveil_csr_writel(pcie, upper_32_bits(cpu_addr),
--			    PAB_EXT_AXI_AMAP_AXI_WIN(win_num));
--
--	mobiveil_csr_writel(pcie, lower_32_bits(pci_addr),
--			    PAB_AXI_AMAP_PEX_WIN_L(win_num));
--	mobiveil_csr_writel(pcie, upper_32_bits(pci_addr),
--			    PAB_AXI_AMAP_PEX_WIN_H(win_num));
-+	csr_writel(pcie, lower_32_bits(cpu_addr) & (~AXI_WINDOW_ALIGN_MASK),
-+		   PAB_AXI_AMAP_AXI_WIN(win_num));
-+	csr_writel(pcie, upper_32_bits(cpu_addr),
-+		   PAB_EXT_AXI_AMAP_AXI_WIN(win_num));
-+
-+	csr_writel(pcie, lower_32_bits(pci_addr),
-+		   PAB_AXI_AMAP_PEX_WIN_L(win_num));
-+	csr_writel(pcie, upper_32_bits(pci_addr),
-+		   PAB_AXI_AMAP_PEX_WIN_H(win_num));
- 
- 	pcie->ob_wins_configured++;
- }
-@@ -584,42 +579,42 @@ static int mobiveil_host_init(struct mob
- 	struct resource_entry *win;
- 
- 	/* setup bus numbers */
--	value = mobiveil_csr_readl(pcie, PCI_PRIMARY_BUS);
-+	value = csr_readl(pcie, PCI_PRIMARY_BUS);
- 	value &= 0xff000000;
- 	value |= 0x00ff0100;
--	mobiveil_csr_writel(pcie, value, PCI_PRIMARY_BUS);
-+	csr_writel(pcie, value, PCI_PRIMARY_BUS);
- 
- 	/*
- 	 * program Bus Master Enable Bit in Command Register in PAB Config
- 	 * Space
- 	 */
--	value = mobiveil_csr_readl(pcie, PCI_COMMAND);
-+	value = csr_readl(pcie, PCI_COMMAND);
- 	value |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
--	mobiveil_csr_writel(pcie, value, PCI_COMMAND);
-+	csr_writel(pcie, value, PCI_COMMAND);
- 
- 	/*
- 	 * program PIO Enable Bit to 1 (and PEX PIO Enable to 1) in PAB_CTRL
- 	 * register
- 	 */
--	pab_ctrl = mobiveil_csr_readl(pcie, PAB_CTRL);
-+	pab_ctrl = csr_readl(pcie, PAB_CTRL);
- 	pab_ctrl |= (1 << AMBA_PIO_ENABLE_SHIFT) | (1 << PEX_PIO_ENABLE_SHIFT);
--	mobiveil_csr_writel(pcie, pab_ctrl, PAB_CTRL);
-+	csr_writel(pcie, pab_ctrl, PAB_CTRL);
- 
--	mobiveil_csr_writel(pcie, (PAB_INTP_INTX_MASK | PAB_INTP_MSI_MASK),
--			    PAB_INTP_AMBA_MISC_ENB);
-+	csr_writel(pcie, (PAB_INTP_INTX_MASK | PAB_INTP_MSI_MASK),
-+		   PAB_INTP_AMBA_MISC_ENB);
- 
- 	/*
- 	 * program PIO Enable Bit to 1 and Config Window Enable Bit to 1 in
- 	 * PAB_AXI_PIO_CTRL Register
- 	 */
--	value = mobiveil_csr_readl(pcie, PAB_AXI_PIO_CTRL);
-+	value = csr_readl(pcie, PAB_AXI_PIO_CTRL);
- 	value |= APIO_EN_MASK;
--	mobiveil_csr_writel(pcie, value, PAB_AXI_PIO_CTRL);
-+	csr_writel(pcie, value, PAB_AXI_PIO_CTRL);
- 
- 	/* Enable PCIe PIO master */
--	value = mobiveil_csr_readl(pcie, PAB_PEX_PIO_CTRL);
-+	value = csr_readl(pcie, PAB_PEX_PIO_CTRL);
- 	value |= 1 << PIO_ENABLE_SHIFT;
--	mobiveil_csr_writel(pcie, value, PAB_PEX_PIO_CTRL);
-+	csr_writel(pcie, value, PAB_PEX_PIO_CTRL);
- 
- 	/*
- 	 * we'll program one outbound window for config reads and
-@@ -652,10 +647,10 @@ static int mobiveil_host_init(struct mob
- 	}
- 
- 	/* fixup for PCIe class register */
--	value = mobiveil_csr_readl(pcie, PAB_INTP_AXI_PIO_CLASS);
-+	value = csr_readl(pcie, PAB_INTP_AXI_PIO_CLASS);
- 	value &= 0xff;
- 	value |= (PCI_CLASS_BRIDGE_PCI << 16);
--	mobiveil_csr_writel(pcie, value, PAB_INTP_AXI_PIO_CLASS);
-+	csr_writel(pcie, value, PAB_INTP_AXI_PIO_CLASS);
- 
- 	/* setup MSI hardware registers */
- 	mobiveil_pcie_enable_msi(pcie);
-@@ -673,9 +668,9 @@ static void mobiveil_mask_intx_irq(struc
- 	pcie = irq_desc_get_chip_data(desc);
- 	mask = 1 << ((data->hwirq + PAB_INTX_START) - 1);
- 	raw_spin_lock_irqsave(&pcie->intx_mask_lock, flags);
--	shifted_val = mobiveil_csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
-+	shifted_val = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
- 	shifted_val &= ~mask;
--	mobiveil_csr_writel(pcie, shifted_val, PAB_INTP_AMBA_MISC_ENB);
-+	csr_writel(pcie, shifted_val, PAB_INTP_AMBA_MISC_ENB);
- 	raw_spin_unlock_irqrestore(&pcie->intx_mask_lock, flags);
- }
- 
-@@ -689,9 +684,9 @@ static void mobiveil_unmask_intx_irq(str
- 	pcie = irq_desc_get_chip_data(desc);
- 	mask = 1 << ((data->hwirq + PAB_INTX_START) - 1);
- 	raw_spin_lock_irqsave(&pcie->intx_mask_lock, flags);
--	shifted_val = mobiveil_csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
-+	shifted_val = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
- 	shifted_val |= mask;
--	mobiveil_csr_writel(pcie, shifted_val, PAB_INTP_AMBA_MISC_ENB);
-+	csr_writel(pcie, shifted_val, PAB_INTP_AMBA_MISC_ENB);
- 	raw_spin_unlock_irqrestore(&pcie->intx_mask_lock, flags);
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0009-PCI-mobiveil-Refactor-Mobiveil-PCIe-Host-Bridge-IP-d.patch b/target/linux/layerscape/patches-5.4/812-pcie-0009-PCI-mobiveil-Refactor-Mobiveil-PCIe-Host-Bridge-IP-d.patch
deleted file mode 100644
index 08f7a7a0f0..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0009-PCI-mobiveil-Refactor-Mobiveil-PCIe-Host-Bridge-IP-d.patch
+++ /dev/null
@@ -1,2184 +0,0 @@
-From ab6a07d577dbd45d00a1738a6b5a28a6666be754 Mon Sep 17 00:00:00 2001
-From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-Date: Tue, 25 Jun 2019 09:09:07 +0000
-Subject: [PATCH] PCI: mobiveil: Refactor Mobiveil PCIe Host Bridge IP driver
-
-Refactor the Mobiveil PCIe Host Bridge IP driver to make
-it easier to add support for both RC and EP mode driver.
-This patch moved the Mobiveil driver to an new directory
-'drivers/pci/controller/mobiveil' and refactor it according
-to the RC and EP abstraction.
-
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
-Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
----
- MAINTAINERS                                        |   2 +-
- drivers/pci/controller/Kconfig                     |  11 +-
- drivers/pci/controller/Makefile                    |   2 +-
- drivers/pci/controller/mobiveil/Kconfig            |  24 +
- drivers/pci/controller/mobiveil/Makefile           |   4 +
- .../pci/controller/mobiveil/pcie-mobiveil-host.c   | 611 +++++++++++++
- .../pci/controller/mobiveil/pcie-mobiveil-plat.c   |  59 ++
- drivers/pci/controller/mobiveil/pcie-mobiveil.c    | 227 +++++
- drivers/pci/controller/mobiveil/pcie-mobiveil.h    | 189 ++++
- drivers/pci/controller/pcie-mobiveil.c             | 964 ---------------------
- 10 files changed, 1117 insertions(+), 976 deletions(-)
- create mode 100644 drivers/pci/controller/mobiveil/Kconfig
- create mode 100644 drivers/pci/controller/mobiveil/Makefile
- create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
- create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil-plat.c
- create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil.c
- create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil.h
- delete mode 100644 drivers/pci/controller/pcie-mobiveil.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -12504,7 +12504,7 @@ M:	Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
- L:	linux-pci@vger.kernel.org
- S:	Supported
- F:	Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
--F:	drivers/pci/controller/pcie-mobiveil.c
-+F:	drivers/pci/controller/mobiveil/pcie-mobiveil*
- 
- PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
- M:	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---- a/drivers/pci/controller/Kconfig
-+++ b/drivers/pci/controller/Kconfig
-@@ -241,16 +241,6 @@ config PCIE_MEDIATEK
- 	  Say Y here if you want to enable PCIe controller support on
- 	  MediaTek SoCs.
- 
--config PCIE_MOBIVEIL
--	bool "Mobiveil AXI PCIe controller"
--	depends on ARCH_ZYNQMP || COMPILE_TEST
--	depends on OF
--	depends on PCI_MSI_IRQ_DOMAIN
--	help
--	  Say Y here if you want to enable support for the Mobiveil AXI PCIe
--	  Soft IP. It has up to 8 outbound and inbound windows
--	  for address translation and it is a PCIe Gen4 IP.
--
- config PCIE_TANGO_SMP8759
- 	bool "Tango SMP8759 PCIe controller (DANGEROUS)"
- 	depends on ARCH_TANGO && PCI_MSI && OF
-@@ -289,4 +279,5 @@ config PCI_HYPERV_INTERFACE
- 	  have a common interface with the Hyper-V PCI frontend driver.
- 
- source "drivers/pci/controller/dwc/Kconfig"
-+source "drivers/pci/controller/mobiveil/Kconfig"
- endmenu
---- a/drivers/pci/controller/Makefile
-+++ b/drivers/pci/controller/Makefile
-@@ -27,11 +27,11 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rock
- obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
- obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
- obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
--obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
- obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
- obj-$(CONFIG_VMD) += vmd.o
- # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
- obj-y				+= dwc/
-+obj-y				+= mobiveil/
- 
- 
- # The following drivers are for devices that use the generic ACPI
---- /dev/null
-+++ b/drivers/pci/controller/mobiveil/Kconfig
-@@ -0,0 +1,24 @@
-+# SPDX-License-Identifier: GPL-2.0
-+
-+menu "Mobiveil PCIe Core Support"
-+	depends on PCI
-+
-+config PCIE_MOBIVEIL
-+	bool
-+
-+config PCIE_MOBIVEIL_HOST
-+        bool
-+	depends on PCI_MSI_IRQ_DOMAIN
-+        select PCIE_MOBIVEIL
-+
-+config PCIE_MOBIVEIL_PLAT
-+	bool "Mobiveil AXI PCIe controller"
-+	depends on ARCH_ZYNQMP || COMPILE_TEST
-+	depends on OF
-+	select PCIE_MOBIVEIL_HOST
-+	help
-+	  Say Y here if you want to enable support for the Mobiveil AXI PCIe
-+	  Soft IP. It has up to 8 outbound and inbound windows
-+	  for address translation and it is a PCIe Gen4 IP.
-+
-+endmenu
---- /dev/null
-+++ b/drivers/pci/controller/mobiveil/Makefile
-@@ -0,0 +1,4 @@
-+# SPDX-License-Identifier: GPL-2.0
-+obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
-+obj-$(CONFIG_PCIE_MOBIVEIL_HOST) += pcie-mobiveil-host.o
-+obj-$(CONFIG_PCIE_MOBIVEIL_PLAT) += pcie-mobiveil-plat.o
---- /dev/null
-+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
-@@ -0,0 +1,611 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * PCIe host controller driver for Mobiveil PCIe Host controller
-+ *
-+ * Copyright (c) 2018 Mobiveil Inc.
-+ * Copyright 2019 NXP
-+ *
-+ * Author: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
-+ * Refactor: Zhiqiang Hou <Zhiqiang.Hou@nxp.com>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/irqchip/chained_irq.h>
-+#include <linux/irqdomain.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/msi.h>
-+#include <linux/of_address.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_pci.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+#include "pcie-mobiveil.h"
-+
-+static bool mobiveil_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
-+{
-+	struct mobiveil_pcie *pcie = bus->sysdata;
-+
-+	/* Only one device down on each root port */
-+	if ((bus->number == pcie->rp.root_bus_nr) && (devfn > 0))
-+		return false;
-+
-+	/*
-+	 * Do not read more than one device on the bus directly
-+	 * attached to RC
-+	 */
-+	if ((bus->primary == pcie->rp.root_bus_nr) && (PCI_SLOT(devfn) > 0))
-+		return false;
-+
-+	return true;
-+}
-+
-+/*
-+ * mobiveil_pcie_map_bus - routine to get the configuration base of either
-+ * root port or endpoint
-+ */
-+static void __iomem *mobiveil_pcie_map_bus(struct pci_bus *bus,
-+					   unsigned int devfn, int where)
-+{
-+	struct mobiveil_pcie *pcie = bus->sysdata;
-+	u32 value;
-+
-+	if (!mobiveil_pcie_valid_device(bus, devfn))
-+		return NULL;
-+
-+	/* RC config access */
-+	if (bus->number == pcie->rp.root_bus_nr)
-+		return pcie->csr_axi_slave_base + where;
-+
-+	/*
-+	 * EP config access (in Config/APIO space)
-+	 * Program PEX Address base (31..16 bits) with appropriate value
-+	 * (BDF) in PAB_AXI_AMAP_PEX_WIN_L0 Register.
-+	 * Relies on pci_lock serialization
-+	 */
-+	value = bus->number << PAB_BUS_SHIFT |
-+		PCI_SLOT(devfn) << PAB_DEVICE_SHIFT |
-+		PCI_FUNC(devfn) << PAB_FUNCTION_SHIFT;
-+
-+	csr_writel(pcie, value, PAB_AXI_AMAP_PEX_WIN_L(WIN_NUM_0));
-+
-+	return pcie->rp.config_axi_slave_base + where;
-+}
-+
-+static struct pci_ops mobiveil_pcie_ops = {
-+	.map_bus = mobiveil_pcie_map_bus,
-+	.read = pci_generic_config_read,
-+	.write = pci_generic_config_write,
-+};
-+
-+static void mobiveil_pcie_isr(struct irq_desc *desc)
-+{
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+	struct mobiveil_pcie *pcie = irq_desc_get_handler_data(desc);
-+	struct device *dev = &pcie->pdev->dev;
-+	struct mobiveil_msi *msi = &pcie->rp.msi;
-+	u32 msi_data, msi_addr_lo, msi_addr_hi;
-+	u32 intr_status, msi_status;
-+	unsigned long shifted_status;
-+	u32 bit, virq, val, mask;
-+
-+	/*
-+	 * The core provides a single interrupt for both INTx/MSI messages.
-+	 * So we'll read both INTx and MSI status
-+	 */
-+
-+	chained_irq_enter(chip, desc);
-+
-+	/* read INTx status */
-+	val = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT);
-+	mask = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
-+	intr_status = val & mask;
-+
-+	/* Handle INTx */
-+	if (intr_status & PAB_INTP_INTX_MASK) {
-+		shifted_status = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT);
-+		shifted_status &= PAB_INTP_INTX_MASK;
-+		shifted_status >>= PAB_INTX_START;
-+		do {
-+			for_each_set_bit(bit, &shifted_status, PCI_NUM_INTX) {
-+				virq = irq_find_mapping(pcie->rp.intx_domain,
-+							bit + 1);
-+				if (virq)
-+					generic_handle_irq(virq);
-+				else
-+					dev_err_ratelimited(dev, "unexpected IRQ, INT%d\n",
-+							    bit);
-+
-+				/* clear interrupt handled */
-+				csr_writel(pcie, 1 << (PAB_INTX_START + bit),
-+					   PAB_INTP_AMBA_MISC_STAT);
-+			}
-+
-+			shifted_status = csr_readl(pcie,
-+						   PAB_INTP_AMBA_MISC_STAT);
-+			shifted_status &= PAB_INTP_INTX_MASK;
-+			shifted_status >>= PAB_INTX_START;
-+		} while (shifted_status != 0);
-+	}
-+
-+	/* read extra MSI status register */
-+	msi_status = readl_relaxed(pcie->apb_csr_base + MSI_STATUS_OFFSET);
-+
-+	/* handle MSI interrupts */
-+	while (msi_status & 1) {
-+		msi_data = readl_relaxed(pcie->apb_csr_base + MSI_DATA_OFFSET);
-+
-+		/*
-+		 * MSI_STATUS_OFFSET register gets updated to zero
-+		 * once we pop not only the MSI data but also address
-+		 * from MSI hardware FIFO. So keeping these following
-+		 * two dummy reads.
-+		 */
-+		msi_addr_lo = readl_relaxed(pcie->apb_csr_base +
-+					    MSI_ADDR_L_OFFSET);
-+		msi_addr_hi = readl_relaxed(pcie->apb_csr_base +
-+					    MSI_ADDR_H_OFFSET);
-+		dev_dbg(dev, "MSI registers, data: %08x, addr: %08x:%08x\n",
-+			msi_data, msi_addr_hi, msi_addr_lo);
-+
-+		virq = irq_find_mapping(msi->dev_domain, msi_data);
-+		if (virq)
-+			generic_handle_irq(virq);
-+
-+		msi_status = readl_relaxed(pcie->apb_csr_base +
-+					   MSI_STATUS_OFFSET);
-+	}
-+
-+	/* Clear the interrupt status */
-+	csr_writel(pcie, intr_status, PAB_INTP_AMBA_MISC_STAT);
-+	chained_irq_exit(chip, desc);
-+}
-+
-+static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie)
-+{
-+	struct device *dev = &pcie->pdev->dev;
-+	struct platform_device *pdev = pcie->pdev;
-+	struct device_node *node = dev->of_node;
-+	struct resource *res;
-+
-+	/* map config resource */
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+					   "config_axi_slave");
-+	pcie->rp.config_axi_slave_base = devm_pci_remap_cfg_resource(dev, res);
-+	if (IS_ERR(pcie->rp.config_axi_slave_base))
-+		return PTR_ERR(pcie->rp.config_axi_slave_base);
-+	pcie->rp.ob_io_res = res;
-+
-+	/* map csr resource */
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+					   "csr_axi_slave");
-+	pcie->csr_axi_slave_base = devm_pci_remap_cfg_resource(dev, res);
-+	if (IS_ERR(pcie->csr_axi_slave_base))
-+		return PTR_ERR(pcie->csr_axi_slave_base);
-+	pcie->pcie_reg_base = res->start;
-+
-+	/* read the number of windows requested */
-+	if (of_property_read_u32(node, "apio-wins", &pcie->apio_wins))
-+		pcie->apio_wins = MAX_PIO_WINDOWS;
-+
-+	if (of_property_read_u32(node, "ppio-wins", &pcie->ppio_wins))
-+		pcie->ppio_wins = MAX_PIO_WINDOWS;
-+
-+	return 0;
-+}
-+
-+static void mobiveil_pcie_enable_msi(struct mobiveil_pcie *pcie)
-+{
-+	phys_addr_t msg_addr = pcie->pcie_reg_base;
-+	struct mobiveil_msi *msi = &pcie->rp.msi;
-+
-+	msi->num_of_vectors = PCI_NUM_MSI;
-+	msi->msi_pages_phys = (phys_addr_t)msg_addr;
-+
-+	writel_relaxed(lower_32_bits(msg_addr),
-+		       pcie->apb_csr_base + MSI_BASE_LO_OFFSET);
-+	writel_relaxed(upper_32_bits(msg_addr),
-+		       pcie->apb_csr_base + MSI_BASE_HI_OFFSET);
-+	writel_relaxed(4096, pcie->apb_csr_base + MSI_SIZE_OFFSET);
-+	writel_relaxed(1, pcie->apb_csr_base + MSI_ENABLE_OFFSET);
-+}
-+
-+static int mobiveil_host_init(struct mobiveil_pcie *pcie)
-+{
-+	u32 value, pab_ctrl, type;
-+	struct resource_entry *win;
-+
-+	/* setup bus numbers */
-+	value = csr_readl(pcie, PCI_PRIMARY_BUS);
-+	value &= 0xff000000;
-+	value |= 0x00ff0100;
-+	csr_writel(pcie, value, PCI_PRIMARY_BUS);
-+
-+	/*
-+	 * program Bus Master Enable Bit in Command Register in PAB Config
-+	 * Space
-+	 */
-+	value = csr_readl(pcie, PCI_COMMAND);
-+	value |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
-+	csr_writel(pcie, value, PCI_COMMAND);
-+
-+	/*
-+	 * program PIO Enable Bit to 1 (and PEX PIO Enable to 1) in PAB_CTRL
-+	 * register
-+	 */
-+	pab_ctrl = csr_readl(pcie, PAB_CTRL);
-+	pab_ctrl |= (1 << AMBA_PIO_ENABLE_SHIFT) | (1 << PEX_PIO_ENABLE_SHIFT);
-+	csr_writel(pcie, pab_ctrl, PAB_CTRL);
-+
-+	/*
-+	 * program PIO Enable Bit to 1 and Config Window Enable Bit to 1 in
-+	 * PAB_AXI_PIO_CTRL Register
-+	 */
-+	value = csr_readl(pcie, PAB_AXI_PIO_CTRL);
-+	value |= APIO_EN_MASK;
-+	csr_writel(pcie, value, PAB_AXI_PIO_CTRL);
-+
-+	/* Enable PCIe PIO master */
-+	value = csr_readl(pcie, PAB_PEX_PIO_CTRL);
-+	value |= 1 << PIO_ENABLE_SHIFT;
-+	csr_writel(pcie, value, PAB_PEX_PIO_CTRL);
-+
-+	/*
-+	 * we'll program one outbound window for config reads and
-+	 * another default inbound window for all the upstream traffic
-+	 * rest of the outbound windows will be configured according to
-+	 * the "ranges" field defined in device tree
-+	 */
-+
-+	/* config outbound translation window */
-+	program_ob_windows(pcie, WIN_NUM_0, pcie->rp.ob_io_res->start, 0,
-+			   CFG_WINDOW_TYPE, resource_size(pcie->rp.ob_io_res));
-+
-+	/* memory inbound translation window */
-+	program_ib_windows(pcie, WIN_NUM_0, 0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
-+
-+	/* Get the I/O and memory ranges from DT */
-+	resource_list_for_each_entry(win, &pcie->resources) {
-+		if (resource_type(win->res) == IORESOURCE_MEM) {
-+			type = MEM_WINDOW_TYPE;
-+		} else if (resource_type(win->res) == IORESOURCE_IO) {
-+			type = IO_WINDOW_TYPE;
-+		} else if (resource_type(win->res) == IORESOURCE_BUS) {
-+			pcie->rp.root_bus_nr = win->res->start;
-+			continue;
-+		} else {
-+			continue;
-+		}
-+
-+		/* configure outbound translation window */
-+		program_ob_windows(pcie, pcie->ob_wins_configured,
-+				   win->res->start,
-+				   win->res->start - win->offset,
-+				   type, resource_size(win->res));
-+	}
-+
-+	/* fixup for PCIe class register */
-+	value = csr_readl(pcie, PAB_INTP_AXI_PIO_CLASS);
-+	value &= 0xff;
-+	value |= (PCI_CLASS_BRIDGE_PCI << 16);
-+	csr_writel(pcie, value, PAB_INTP_AXI_PIO_CLASS);
-+
-+	return 0;
-+}
-+
-+static void mobiveil_mask_intx_irq(struct irq_data *data)
-+{
-+	struct irq_desc *desc = irq_to_desc(data->irq);
-+	struct mobiveil_pcie *pcie;
-+	unsigned long flags;
-+	u32 mask, shifted_val;
-+
-+	pcie = irq_desc_get_chip_data(desc);
-+	mask = 1 << ((data->hwirq + PAB_INTX_START) - 1);
-+	raw_spin_lock_irqsave(&pcie->rp.intx_mask_lock, flags);
-+	shifted_val = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
-+	shifted_val &= ~mask;
-+	csr_writel(pcie, shifted_val, PAB_INTP_AMBA_MISC_ENB);
-+	raw_spin_unlock_irqrestore(&pcie->rp.intx_mask_lock, flags);
-+}
-+
-+static void mobiveil_unmask_intx_irq(struct irq_data *data)
-+{
-+	struct irq_desc *desc = irq_to_desc(data->irq);
-+	struct mobiveil_pcie *pcie;
-+	unsigned long flags;
-+	u32 shifted_val, mask;
-+
-+	pcie = irq_desc_get_chip_data(desc);
-+	mask = 1 << ((data->hwirq + PAB_INTX_START) - 1);
-+	raw_spin_lock_irqsave(&pcie->rp.intx_mask_lock, flags);
-+	shifted_val = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
-+	shifted_val |= mask;
-+	csr_writel(pcie, shifted_val, PAB_INTP_AMBA_MISC_ENB);
-+	raw_spin_unlock_irqrestore(&pcie->rp.intx_mask_lock, flags);
-+}
-+
-+static struct irq_chip intx_irq_chip = {
-+	.name = "mobiveil_pcie:intx",
-+	.irq_enable = mobiveil_unmask_intx_irq,
-+	.irq_disable = mobiveil_mask_intx_irq,
-+	.irq_mask = mobiveil_mask_intx_irq,
-+	.irq_unmask = mobiveil_unmask_intx_irq,
-+};
-+
-+/* routine to setup the INTx related data */
-+static int mobiveil_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
-+				  irq_hw_number_t hwirq)
-+{
-+	irq_set_chip_and_handler(irq, &intx_irq_chip, handle_level_irq);
-+	irq_set_chip_data(irq, domain->host_data);
-+
-+	return 0;
-+}
-+
-+/* INTx domain operations structure */
-+static const struct irq_domain_ops intx_domain_ops = {
-+	.map = mobiveil_pcie_intx_map,
-+};
-+
-+static struct irq_chip mobiveil_msi_irq_chip = {
-+	.name = "Mobiveil PCIe MSI",
-+	.irq_mask = pci_msi_mask_irq,
-+	.irq_unmask = pci_msi_unmask_irq,
-+};
-+
-+static struct msi_domain_info mobiveil_msi_domain_info = {
-+	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
-+		   MSI_FLAG_PCI_MSIX),
-+	.chip	= &mobiveil_msi_irq_chip,
-+};
-+
-+static void mobiveil_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
-+{
-+	struct mobiveil_pcie *pcie = irq_data_get_irq_chip_data(data);
-+	phys_addr_t addr = pcie->pcie_reg_base + (data->hwirq * sizeof(int));
-+
-+	msg->address_lo = lower_32_bits(addr);
-+	msg->address_hi = upper_32_bits(addr);
-+	msg->data = data->hwirq;
-+
-+	dev_dbg(&pcie->pdev->dev, "msi#%d address_hi %#x address_lo %#x\n",
-+		(int)data->hwirq, msg->address_hi, msg->address_lo);
-+}
-+
-+static int mobiveil_msi_set_affinity(struct irq_data *irq_data,
-+				     const struct cpumask *mask, bool force)
-+{
-+	return -EINVAL;
-+}
-+
-+static struct irq_chip mobiveil_msi_bottom_irq_chip = {
-+	.name			= "Mobiveil MSI",
-+	.irq_compose_msi_msg	= mobiveil_compose_msi_msg,
-+	.irq_set_affinity	= mobiveil_msi_set_affinity,
-+};
-+
-+static int mobiveil_irq_msi_domain_alloc(struct irq_domain *domain,
-+					 unsigned int virq,
-+					 unsigned int nr_irqs, void *args)
-+{
-+	struct mobiveil_pcie *pcie = domain->host_data;
-+	struct mobiveil_msi *msi = &pcie->rp.msi;
-+	unsigned long bit;
-+
-+	WARN_ON(nr_irqs != 1);
-+	mutex_lock(&msi->lock);
-+
-+	bit = find_first_zero_bit(msi->msi_irq_in_use, msi->num_of_vectors);
-+	if (bit >= msi->num_of_vectors) {
-+		mutex_unlock(&msi->lock);
-+		return -ENOSPC;
-+	}
-+
-+	set_bit(bit, msi->msi_irq_in_use);
-+
-+	mutex_unlock(&msi->lock);
-+
-+	irq_domain_set_info(domain, virq, bit, &mobiveil_msi_bottom_irq_chip,
-+			    domain->host_data, handle_level_irq, NULL, NULL);
-+	return 0;
-+}
-+
-+static void mobiveil_irq_msi_domain_free(struct irq_domain *domain,
-+					 unsigned int virq,
-+					 unsigned int nr_irqs)
-+{
-+	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
-+	struct mobiveil_pcie *pcie = irq_data_get_irq_chip_data(d);
-+	struct mobiveil_msi *msi = &pcie->rp.msi;
-+
-+	mutex_lock(&msi->lock);
-+
-+	if (!test_bit(d->hwirq, msi->msi_irq_in_use))
-+		dev_err(&pcie->pdev->dev, "trying to free unused MSI#%lu\n",
-+			d->hwirq);
-+	else
-+		__clear_bit(d->hwirq, msi->msi_irq_in_use);
-+
-+	mutex_unlock(&msi->lock);
-+}
-+static const struct irq_domain_ops msi_domain_ops = {
-+	.alloc	= mobiveil_irq_msi_domain_alloc,
-+	.free	= mobiveil_irq_msi_domain_free,
-+};
-+
-+static int mobiveil_allocate_msi_domains(struct mobiveil_pcie *pcie)
-+{
-+	struct device *dev = &pcie->pdev->dev;
-+	struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
-+	struct mobiveil_msi *msi = &pcie->rp.msi;
-+
-+	mutex_init(&msi->lock);
-+	msi->dev_domain = irq_domain_add_linear(NULL, msi->num_of_vectors,
-+						&msi_domain_ops, pcie);
-+	if (!msi->dev_domain) {
-+		dev_err(dev, "failed to create IRQ domain\n");
-+		return -ENOMEM;
-+	}
-+
-+	msi->msi_domain = pci_msi_create_irq_domain(fwnode,
-+						    &mobiveil_msi_domain_info,
-+						    msi->dev_domain);
-+	if (!msi->msi_domain) {
-+		dev_err(dev, "failed to create MSI domain\n");
-+		irq_domain_remove(msi->dev_domain);
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
-+
-+static int mobiveil_pcie_init_irq_domain(struct mobiveil_pcie *pcie)
-+{
-+	struct device *dev = &pcie->pdev->dev;
-+	struct device_node *node = dev->of_node;
-+	int ret;
-+
-+	/* setup INTx */
-+	pcie->rp.intx_domain = irq_domain_add_linear(node, PCI_NUM_INTX,
-+						     &intx_domain_ops, pcie);
-+
-+	if (!pcie->rp.intx_domain) {
-+		dev_err(dev, "Failed to get a INTx IRQ domain\n");
-+		return -ENOMEM;
-+	}
-+
-+	raw_spin_lock_init(&pcie->rp.intx_mask_lock);
-+
-+	/* setup MSI */
-+	ret = mobiveil_allocate_msi_domains(pcie);
-+	if (ret)
-+		return ret;
-+
-+	return 0;
-+}
-+
-+static int mobiveil_pcie_interrupt_init(struct mobiveil_pcie *pcie)
-+{
-+	struct device *dev = &pcie->pdev->dev;
-+	struct resource *res;
-+	int ret;
-+
-+	if (pcie->rp.ops->interrupt_init)
-+		return pcie->rp.ops->interrupt_init(pcie);
-+
-+	/* map MSI config resource */
-+	res = platform_get_resource_byname(pcie->pdev, IORESOURCE_MEM,
-+					   "apb_csr");
-+	pcie->apb_csr_base = devm_pci_remap_cfg_resource(dev, res);
-+	if (IS_ERR(pcie->apb_csr_base))
-+		return PTR_ERR(pcie->apb_csr_base);
-+
-+	/* setup MSI hardware registers */
-+	mobiveil_pcie_enable_msi(pcie);
-+
-+	pcie->rp.irq = platform_get_irq(pcie->pdev, 0);
-+	if (pcie->rp.irq <= 0) {
-+		dev_err(dev, "failed to map IRQ: %d\n", pcie->rp.irq);
-+		return -ENODEV;
-+	}
-+
-+	/* initialize the IRQ domains */
-+	ret = mobiveil_pcie_init_irq_domain(pcie);
-+	if (ret) {
-+		dev_err(dev, "Failed creating IRQ Domain\n");
-+		return ret;
-+	}
-+
-+	irq_set_chained_handler_and_data(pcie->rp.irq,
-+					 mobiveil_pcie_isr, pcie);
-+
-+	/* Enable interrupts */
-+	csr_writel(pcie, (PAB_INTP_INTX_MASK | PAB_INTP_MSI_MASK),
-+		   PAB_INTP_AMBA_MISC_ENB);
-+
-+	return 0;
-+}
-+
-+int mobiveil_pcie_host_probe(struct mobiveil_pcie *pcie)
-+{
-+	struct pci_bus *bus;
-+	struct pci_bus *child;
-+	struct pci_host_bridge *bridge = pcie->bridge;
-+	struct device *dev = &pcie->pdev->dev;
-+	resource_size_t iobase;
-+	int ret;
-+
-+	INIT_LIST_HEAD(&pcie->resources);
-+
-+	ret = mobiveil_pcie_parse_dt(pcie);
-+	if (ret) {
-+		dev_err(dev, "Parsing DT failed, ret: %x\n", ret);
-+		return ret;
-+	}
-+
-+	/* parse the host bridge base addresses from the device tree file */
-+	ret = devm_of_pci_get_host_bridge_resources(dev, 0, 0xff,
-+						    &pcie->resources, &iobase);
-+	if (ret) {
-+		dev_err(dev, "Getting bridge resources failed\n");
-+		return ret;
-+	}
-+
-+	/*
-+	 * configure all inbound and outbound windows and prepare the RC for
-+	 * config access
-+	 */
-+	ret = mobiveil_host_init(pcie);
-+	if (ret) {
-+		dev_err(dev, "Failed to initialize host\n");
-+		goto error;
-+	}
-+
-+	ret = mobiveil_pcie_interrupt_init(pcie);
-+	if (ret) {
-+		dev_err(dev, "Interrupt init failed\n");
-+		goto error;
-+	}
-+
-+	ret = devm_request_pci_bus_resources(dev, &pcie->resources);
-+	if (ret)
-+		goto error;
-+
-+	/* Initialize bridge */
-+	list_splice_init(&pcie->resources, &bridge->windows);
-+	bridge->dev.parent = dev;
-+	bridge->sysdata = pcie;
-+	bridge->busnr = pcie->rp.root_bus_nr;
-+	bridge->ops = &mobiveil_pcie_ops;
-+	bridge->map_irq = of_irq_parse_and_map_pci;
-+	bridge->swizzle_irq = pci_common_swizzle;
-+
-+	ret = mobiveil_bringup_link(pcie);
-+	if (ret) {
-+		dev_info(dev, "link bring-up failed\n");
-+		goto error;
-+	}
-+
-+	/* setup the kernel resources for the newly added PCIe root bus */
-+	ret = pci_scan_root_bus_bridge(bridge);
-+	if (ret)
-+		goto error;
-+
-+	bus = bridge->bus;
-+
-+	pci_assign_unassigned_bus_resources(bus);
-+	list_for_each_entry(child, &bus->children, node)
-+		pcie_bus_configure_settings(child);
-+	pci_bus_add_devices(bus);
-+
-+	return 0;
-+error:
-+	pci_free_resource_list(&pcie->resources);
-+	return ret;
-+}
---- /dev/null
-+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil-plat.c
-@@ -0,0 +1,59 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * PCIe host controller driver for Mobiveil PCIe Host controller
-+ *
-+ * Copyright (c) 2018 Mobiveil Inc.
-+ * Copyright 2019 NXP
-+ *
-+ * Author: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
-+ * Refactor: Zhiqiang Hou <Zhiqiang.Hou@nxp.com>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of_pci.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+#include "pcie-mobiveil.h"
-+
-+static int mobiveil_pcie_probe(struct platform_device *pdev)
-+{
-+	struct mobiveil_pcie *pcie;
-+	struct pci_host_bridge *bridge;
-+	struct device *dev = &pdev->dev;
-+
-+	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
-+	if (!bridge)
-+		return -ENOMEM;
-+
-+	pcie = pci_host_bridge_priv(bridge);
-+
-+	pcie->pdev = pdev;
-+
-+	return mobiveil_pcie_host_probe(pcie);
-+}
-+
-+static const struct of_device_id mobiveil_pcie_of_match[] = {
-+	{.compatible = "mbvl,gpex40-pcie",},
-+	{},
-+};
-+
-+MODULE_DEVICE_TABLE(of, mobiveil_pcie_of_match);
-+
-+static struct platform_driver mobiveil_pcie_driver = {
-+	.probe = mobiveil_pcie_probe,
-+	.driver = {
-+		.name = "mobiveil-pcie",
-+		.of_match_table = mobiveil_pcie_of_match,
-+		.suppress_bind_attrs = true,
-+	},
-+};
-+
-+builtin_platform_driver(mobiveil_pcie_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("Mobiveil PCIe host controller driver");
-+MODULE_AUTHOR("Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>");
---- /dev/null
-+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.c
-@@ -0,0 +1,227 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * PCIe host controller driver for Mobiveil PCIe Host controller
-+ *
-+ * Copyright (c) 2018 Mobiveil Inc.
-+ * Copyright 2019 NXP
-+ *
-+ * Author: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
-+ * Refactor: Zhiqiang Hou <Zhiqiang.Hou@nxp.com>
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+
-+#include "pcie-mobiveil.h"
-+
-+/*
-+ * mobiveil_pcie_sel_page - routine to access paged register
-+ *
-+ * Registers whose address greater than PAGED_ADDR_BNDRY (0xc00) are paged,
-+ * for this scheme to work extracted higher 6 bits of the offset will be
-+ * written to pg_sel field of PAB_CTRL register and rest of the lower 10
-+ * bits enabled with PAGED_ADDR_BNDRY are used as offset of the register.
-+ */
-+static void mobiveil_pcie_sel_page(struct mobiveil_pcie *pcie, u8 pg_idx)
-+{
-+	u32 val;
-+
-+	val = readl(pcie->csr_axi_slave_base + PAB_CTRL);
-+	val &= ~(PAGE_SEL_MASK << PAGE_SEL_SHIFT);
-+	val |= (pg_idx & PAGE_SEL_MASK) << PAGE_SEL_SHIFT;
-+
-+	writel(val, pcie->csr_axi_slave_base + PAB_CTRL);
-+}
-+
-+static void *mobiveil_pcie_comp_addr(struct mobiveil_pcie *pcie, u32 off)
-+{
-+	if (off < PAGED_ADDR_BNDRY) {
-+		/* For directly accessed registers, clear the pg_sel field */
-+		mobiveil_pcie_sel_page(pcie, 0);
-+		return pcie->csr_axi_slave_base + off;
-+	}
-+
-+	mobiveil_pcie_sel_page(pcie, OFFSET_TO_PAGE_IDX(off));
-+	return pcie->csr_axi_slave_base + OFFSET_TO_PAGE_ADDR(off);
-+}
-+
-+static int mobiveil_pcie_read(void __iomem *addr, int size, u32 *val)
-+{
-+	if ((uintptr_t)addr & (size - 1)) {
-+		*val = 0;
-+		return PCIBIOS_BAD_REGISTER_NUMBER;
-+	}
-+
-+	switch (size) {
-+	case 4:
-+		*val = readl(addr);
-+		break;
-+	case 2:
-+		*val = readw(addr);
-+		break;
-+	case 1:
-+		*val = readb(addr);
-+		break;
-+	default:
-+		*val = 0;
-+		return PCIBIOS_BAD_REGISTER_NUMBER;
-+	}
-+
-+	return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int mobiveil_pcie_write(void __iomem *addr, int size, u32 val)
-+{
-+	if ((uintptr_t)addr & (size - 1))
-+		return PCIBIOS_BAD_REGISTER_NUMBER;
-+
-+	switch (size) {
-+	case 4:
-+		writel(val, addr);
-+		break;
-+	case 2:
-+		writew(val, addr);
-+		break;
-+	case 1:
-+		writeb(val, addr);
-+		break;
-+	default:
-+		return PCIBIOS_BAD_REGISTER_NUMBER;
-+	}
-+
-+	return PCIBIOS_SUCCESSFUL;
-+}
-+
-+u32 csr_read(struct mobiveil_pcie *pcie, u32 off, size_t size)
-+{
-+	void *addr;
-+	u32 val;
-+	int ret;
-+
-+	addr = mobiveil_pcie_comp_addr(pcie, off);
-+
-+	ret = mobiveil_pcie_read(addr, size, &val);
-+	if (ret)
-+		dev_err(&pcie->pdev->dev, "read CSR address failed\n");
-+
-+	return val;
-+}
-+
-+void csr_write(struct mobiveil_pcie *pcie, u32 val, u32 off, size_t size)
-+{
-+	void *addr;
-+	int ret;
-+
-+	addr = mobiveil_pcie_comp_addr(pcie, off);
-+
-+	ret = mobiveil_pcie_write(addr, size, val);
-+	if (ret)
-+		dev_err(&pcie->pdev->dev, "write CSR address failed\n");
-+}
-+
-+bool mobiveil_pcie_link_up(struct mobiveil_pcie *pcie)
-+{
-+	if (pcie->ops->link_up)
-+		return pcie->ops->link_up(pcie);
-+
-+	return (csr_readl(pcie, LTSSM_STATUS) &
-+		LTSSM_STATUS_L0_MASK) == LTSSM_STATUS_L0;
-+}
-+
-+void program_ib_windows(struct mobiveil_pcie *pcie, int win_num, u64 cpu_addr,
-+			u64 pci_addr, u32 type, u64 size)
-+{
-+	u32 value;
-+	u64 size64 = ~(size - 1);
-+
-+	if (win_num >= pcie->ppio_wins) {
-+		dev_err(&pcie->pdev->dev,
-+			"ERROR: max inbound windows reached !\n");
-+		return;
-+	}
-+
-+	value = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
-+	value &= ~(AMAP_CTRL_TYPE_MASK << AMAP_CTRL_TYPE_SHIFT | WIN_SIZE_MASK);
-+	value |= type << AMAP_CTRL_TYPE_SHIFT | 1 << AMAP_CTRL_EN_SHIFT |
-+		 (lower_32_bits(size64) & WIN_SIZE_MASK);
-+	csr_writel(pcie, value, PAB_PEX_AMAP_CTRL(win_num));
-+
-+	csr_writel(pcie, upper_32_bits(size64),
-+		   PAB_EXT_PEX_AMAP_SIZEN(win_num));
-+
-+	csr_writel(pcie, lower_32_bits(cpu_addr),
-+		   PAB_PEX_AMAP_AXI_WIN(win_num));
-+	csr_writel(pcie, upper_32_bits(cpu_addr),
-+		   PAB_EXT_PEX_AMAP_AXI_WIN(win_num));
-+
-+	csr_writel(pcie, lower_32_bits(pci_addr),
-+		   PAB_PEX_AMAP_PEX_WIN_L(win_num));
-+	csr_writel(pcie, upper_32_bits(pci_addr),
-+		   PAB_PEX_AMAP_PEX_WIN_H(win_num));
-+
-+	pcie->ib_wins_configured++;
-+}
-+
-+/*
-+ * routine to program the outbound windows
-+ */
-+void program_ob_windows(struct mobiveil_pcie *pcie, int win_num, u64 cpu_addr,
-+			u64 pci_addr, u32 type, u64 size)
-+{
-+	u32 value;
-+	u64 size64 = ~(size - 1);
-+
-+	if (win_num >= pcie->apio_wins) {
-+		dev_err(&pcie->pdev->dev,
-+			"ERROR: max outbound windows reached !\n");
-+		return;
-+	}
-+
-+	/*
-+	 * program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit
-+	 * to 4 KB in PAB_AXI_AMAP_CTRL register
-+	 */
-+	value = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num));
-+	value &= ~(WIN_TYPE_MASK << WIN_TYPE_SHIFT | WIN_SIZE_MASK);
-+	value |= 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
-+		 (lower_32_bits(size64) & WIN_SIZE_MASK);
-+	csr_writel(pcie, value, PAB_AXI_AMAP_CTRL(win_num));
-+
-+	csr_writel(pcie, upper_32_bits(size64), PAB_EXT_AXI_AMAP_SIZE(win_num));
-+
-+	/*
-+	 * program AXI window base with appropriate value in
-+	 * PAB_AXI_AMAP_AXI_WIN0 register
-+	 */
-+	csr_writel(pcie, lower_32_bits(cpu_addr) & (~AXI_WINDOW_ALIGN_MASK),
-+		   PAB_AXI_AMAP_AXI_WIN(win_num));
-+	csr_writel(pcie, upper_32_bits(cpu_addr),
-+		   PAB_EXT_AXI_AMAP_AXI_WIN(win_num));
-+
-+	csr_writel(pcie, lower_32_bits(pci_addr),
-+		   PAB_AXI_AMAP_PEX_WIN_L(win_num));
-+	csr_writel(pcie, upper_32_bits(pci_addr),
-+		   PAB_AXI_AMAP_PEX_WIN_H(win_num));
-+
-+	pcie->ob_wins_configured++;
-+}
-+
-+int mobiveil_bringup_link(struct mobiveil_pcie *pcie)
-+{
-+	int retries;
-+
-+	/* check if the link is up or not */
-+	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
-+		if (mobiveil_pcie_link_up(pcie))
-+			return 0;
-+
-+		usleep_range(LINK_WAIT_MIN, LINK_WAIT_MAX);
-+	}
-+
-+	dev_err(&pcie->pdev->dev, "link never came up\n");
-+
-+	return -ETIMEDOUT;
-+}
---- /dev/null
-+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
-@@ -0,0 +1,189 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * PCIe host controller driver for Mobiveil PCIe Host controller
-+ *
-+ * Copyright (c) 2018 Mobiveil Inc.
-+ * Copyright 2019 NXP
-+ *
-+ * Author: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
-+ * Refactor: Zhiqiang Hou <Zhiqiang.Hou@nxp.com>
-+ */
-+
-+#ifndef _PCIE_MOBIVEIL_H
-+#define _PCIE_MOBIVEIL_H
-+
-+#include <linux/pci.h>
-+#include <linux/irq.h>
-+#include <linux/msi.h>
-+#include "../../pci.h"
-+
-+/* register offsets and bit positions */
-+
-+/*
-+ * translation tables are grouped into windows, each window registers are
-+ * grouped into blocks of 4 or 16 registers each
-+ */
-+#define PAB_REG_BLOCK_SIZE		16
-+#define PAB_EXT_REG_BLOCK_SIZE		4
-+
-+#define PAB_REG_ADDR(offset, win)	\
-+	(offset + (win * PAB_REG_BLOCK_SIZE))
-+#define PAB_EXT_REG_ADDR(offset, win)	\
-+	(offset + (win * PAB_EXT_REG_BLOCK_SIZE))
-+
-+#define LTSSM_STATUS			0x0404
-+#define  LTSSM_STATUS_L0_MASK		0x3f
-+#define  LTSSM_STATUS_L0		0x2d
-+
-+#define PAB_CTRL			0x0808
-+#define  AMBA_PIO_ENABLE_SHIFT		0
-+#define  PEX_PIO_ENABLE_SHIFT		1
-+#define  PAGE_SEL_SHIFT			13
-+#define  PAGE_SEL_MASK			0x3f
-+#define  PAGE_LO_MASK			0x3ff
-+#define  PAGE_SEL_OFFSET_SHIFT		10
-+
-+#define PAB_AXI_PIO_CTRL		0x0840
-+#define  APIO_EN_MASK			0xf
-+
-+#define PAB_PEX_PIO_CTRL		0x08c0
-+#define  PIO_ENABLE_SHIFT		0
-+
-+#define PAB_INTP_AMBA_MISC_ENB		0x0b0c
-+#define PAB_INTP_AMBA_MISC_STAT		0x0b1c
-+#define  PAB_INTP_INTX_MASK		0x01e0
-+#define  PAB_INTP_MSI_MASK		0x8
-+
-+#define PAB_AXI_AMAP_CTRL(win)		PAB_REG_ADDR(0x0ba0, win)
-+#define  WIN_ENABLE_SHIFT		0
-+#define  WIN_TYPE_SHIFT			1
-+#define  WIN_TYPE_MASK			0x3
-+#define  WIN_SIZE_MASK			0xfffffc00
-+
-+#define PAB_EXT_AXI_AMAP_SIZE(win)	PAB_EXT_REG_ADDR(0xbaf0, win)
-+
-+#define PAB_EXT_AXI_AMAP_AXI_WIN(win)	PAB_EXT_REG_ADDR(0x80a0, win)
-+#define PAB_AXI_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x0ba4, win)
-+#define  AXI_WINDOW_ALIGN_MASK		3
-+
-+#define PAB_AXI_AMAP_PEX_WIN_L(win)	PAB_REG_ADDR(0x0ba8, win)
-+#define  PAB_BUS_SHIFT			24
-+#define  PAB_DEVICE_SHIFT		19
-+#define  PAB_FUNCTION_SHIFT		16
-+
-+#define PAB_AXI_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x0bac, win)
-+#define PAB_INTP_AXI_PIO_CLASS		0x474
-+
-+#define PAB_PEX_AMAP_CTRL(win)		PAB_REG_ADDR(0x4ba0, win)
-+#define  AMAP_CTRL_EN_SHIFT		0
-+#define  AMAP_CTRL_TYPE_SHIFT		1
-+#define  AMAP_CTRL_TYPE_MASK		3
-+
-+#define PAB_EXT_PEX_AMAP_SIZEN(win)	PAB_EXT_REG_ADDR(0xbef0, win)
-+#define PAB_EXT_PEX_AMAP_AXI_WIN(win)	PAB_EXT_REG_ADDR(0xb4a0, win)
-+#define PAB_PEX_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x4ba4, win)
-+#define PAB_PEX_AMAP_PEX_WIN_L(win)	PAB_REG_ADDR(0x4ba8, win)
-+#define PAB_PEX_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x4bac, win)
-+
-+/* starting offset of INTX bits in status register */
-+#define PAB_INTX_START			5
-+
-+/* supported number of MSI interrupts */
-+#define PCI_NUM_MSI			16
-+
-+/* MSI registers */
-+#define MSI_BASE_LO_OFFSET		0x04
-+#define MSI_BASE_HI_OFFSET		0x08
-+#define MSI_SIZE_OFFSET			0x0c
-+#define MSI_ENABLE_OFFSET		0x14
-+#define MSI_STATUS_OFFSET		0x18
-+#define MSI_DATA_OFFSET			0x20
-+#define MSI_ADDR_L_OFFSET		0x24
-+#define MSI_ADDR_H_OFFSET		0x28
-+
-+/* outbound and inbound window definitions */
-+#define WIN_NUM_0			0
-+#define WIN_NUM_1			1
-+#define CFG_WINDOW_TYPE			0
-+#define IO_WINDOW_TYPE			1
-+#define MEM_WINDOW_TYPE			2
-+#define IB_WIN_SIZE			((u64)256 * 1024 * 1024 * 1024)
-+#define MAX_PIO_WINDOWS			8
-+
-+/* Parameters for the waiting for link up routine */
-+#define LINK_WAIT_MAX_RETRIES		10
-+#define LINK_WAIT_MIN			90000
-+#define LINK_WAIT_MAX			100000
-+
-+#define PAGED_ADDR_BNDRY		0xc00
-+#define OFFSET_TO_PAGE_ADDR(off)	\
-+	((off & PAGE_LO_MASK) | PAGED_ADDR_BNDRY)
-+#define OFFSET_TO_PAGE_IDX(off)		\
-+	((off >> PAGE_SEL_OFFSET_SHIFT) & PAGE_SEL_MASK)
-+
-+struct mobiveil_pcie;
-+
-+struct mobiveil_msi {			/* MSI information */
-+	struct mutex lock;		/* protect bitmap variable */
-+	struct irq_domain *msi_domain;
-+	struct irq_domain *dev_domain;
-+	phys_addr_t msi_pages_phys;
-+	int num_of_vectors;
-+	DECLARE_BITMAP(msi_irq_in_use, PCI_NUM_MSI);
-+};
-+
-+struct mobiveil_rp_ops {
-+	int (*interrupt_init)(struct mobiveil_pcie *pcie);
-+};
-+
-+struct root_port {
-+	u8 root_bus_nr;
-+	void __iomem *config_axi_slave_base;	/* endpoint config base */
-+	struct resource *ob_io_res;
-+	struct mobiveil_rp_ops *ops;
-+	int irq;
-+	raw_spinlock_t intx_mask_lock;
-+	struct irq_domain *intx_domain;
-+	struct mobiveil_msi msi;
-+};
-+
-+struct mobiveil_pab_ops {
-+	int (*link_up)(struct mobiveil_pcie *pcie);
-+};
-+
-+struct mobiveil_pcie {
-+	struct platform_device *pdev;
-+	struct list_head resources;
-+	void __iomem *csr_axi_slave_base;	/* PAB registers base */
-+	phys_addr_t pcie_reg_base;	/* Physical PCIe Controller Base */
-+	void __iomem *apb_csr_base;	/* MSI register base */
-+	u32 apio_wins;
-+	u32 ppio_wins;
-+	u32 ob_wins_configured;		/* configured outbound windows */
-+	u32 ib_wins_configured;		/* configured inbound windows */
-+	const struct mobiveil_pab_ops *ops;
-+	struct root_port rp;
-+	struct pci_host_bridge *bridge;
-+};
-+
-+int mobiveil_pcie_host_probe(struct mobiveil_pcie *pcie);
-+bool mobiveil_pcie_link_up(struct mobiveil_pcie *pcie);
-+int mobiveil_bringup_link(struct mobiveil_pcie *pcie);
-+void program_ob_windows(struct mobiveil_pcie *pcie, int win_num, u64 cpu_addr,
-+			u64 pci_addr, u32 type, u64 size);
-+void program_ib_windows(struct mobiveil_pcie *pcie, int win_num, u64 cpu_addr,
-+			u64 pci_addr, u32 type, u64 size);
-+u32 csr_read(struct mobiveil_pcie *pcie, u32 off, size_t size);
-+void csr_write(struct mobiveil_pcie *pcie, u32 val, u32 off, size_t size);
-+
-+static inline u32 csr_readl(struct mobiveil_pcie *pcie, u32 off)
-+{
-+	return csr_read(pcie, off, 0x4);
-+}
-+
-+static inline void csr_writel(struct mobiveil_pcie *pcie, u32 val, u32 off)
-+{
-+	csr_write(pcie, val, off, 0x4);
-+}
-+
-+#endif /* _PCIE_MOBIVEIL_H */
---- a/drivers/pci/controller/pcie-mobiveil.c
-+++ /dev/null
-@@ -1,964 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0
--/*
-- * PCIe host controller driver for Mobiveil PCIe Host controller
-- *
-- * Copyright (c) 2018 Mobiveil Inc.
-- * Author: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
-- */
--
--#include <linux/delay.h>
--#include <linux/init.h>
--#include <linux/interrupt.h>
--#include <linux/irq.h>
--#include <linux/irqchip/chained_irq.h>
--#include <linux/irqdomain.h>
--#include <linux/kernel.h>
--#include <linux/module.h>
--#include <linux/msi.h>
--#include <linux/of_address.h>
--#include <linux/of_irq.h>
--#include <linux/of_platform.h>
--#include <linux/of_pci.h>
--#include <linux/pci.h>
--#include <linux/platform_device.h>
--#include <linux/slab.h>
--
--#include "../pci.h"
--
--/* register offsets and bit positions */
--
--/*
-- * translation tables are grouped into windows, each window registers are
-- * grouped into blocks of 4 or 16 registers each
-- */
--#define PAB_REG_BLOCK_SIZE		16
--#define PAB_EXT_REG_BLOCK_SIZE		4
--
--#define PAB_REG_ADDR(offset, win)	\
--	(offset + (win * PAB_REG_BLOCK_SIZE))
--#define PAB_EXT_REG_ADDR(offset, win)	\
--	(offset + (win * PAB_EXT_REG_BLOCK_SIZE))
--
--#define LTSSM_STATUS			0x0404
--#define  LTSSM_STATUS_L0_MASK		0x3f
--#define  LTSSM_STATUS_L0		0x2d
--
--#define PAB_CTRL			0x0808
--#define  AMBA_PIO_ENABLE_SHIFT		0
--#define  PEX_PIO_ENABLE_SHIFT		1
--#define  PAGE_SEL_SHIFT			13
--#define  PAGE_SEL_MASK			0x3f
--#define  PAGE_LO_MASK			0x3ff
--#define  PAGE_SEL_OFFSET_SHIFT		10
--
--#define PAB_AXI_PIO_CTRL		0x0840
--#define  APIO_EN_MASK			0xf
--
--#define PAB_PEX_PIO_CTRL		0x08c0
--#define  PIO_ENABLE_SHIFT		0
--
--#define PAB_INTP_AMBA_MISC_ENB		0x0b0c
--#define PAB_INTP_AMBA_MISC_STAT		0x0b1c
--#define  PAB_INTP_INTX_MASK		0x01e0
--#define  PAB_INTP_MSI_MASK		0x8
--
--#define PAB_AXI_AMAP_CTRL(win)		PAB_REG_ADDR(0x0ba0, win)
--#define  WIN_ENABLE_SHIFT		0
--#define  WIN_TYPE_SHIFT			1
--#define  WIN_TYPE_MASK			0x3
--#define  WIN_SIZE_MASK			0xfffffc00
--
--#define PAB_EXT_AXI_AMAP_SIZE(win)	PAB_EXT_REG_ADDR(0xbaf0, win)
--
--#define PAB_EXT_AXI_AMAP_AXI_WIN(win)	PAB_EXT_REG_ADDR(0x80a0, win)
--#define PAB_AXI_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x0ba4, win)
--#define  AXI_WINDOW_ALIGN_MASK		3
--
--#define PAB_AXI_AMAP_PEX_WIN_L(win)	PAB_REG_ADDR(0x0ba8, win)
--#define  PAB_BUS_SHIFT			24
--#define  PAB_DEVICE_SHIFT		19
--#define  PAB_FUNCTION_SHIFT		16
--
--#define PAB_AXI_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x0bac, win)
--#define PAB_INTP_AXI_PIO_CLASS		0x474
--
--#define PAB_PEX_AMAP_CTRL(win)		PAB_REG_ADDR(0x4ba0, win)
--#define  AMAP_CTRL_EN_SHIFT		0
--#define  AMAP_CTRL_TYPE_SHIFT		1
--#define  AMAP_CTRL_TYPE_MASK		3
--
--#define PAB_EXT_PEX_AMAP_SIZEN(win)	PAB_EXT_REG_ADDR(0xbef0, win)
--#define PAB_EXT_PEX_AMAP_AXI_WIN(win)	PAB_EXT_REG_ADDR(0xb4a0, win)
--#define PAB_PEX_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x4ba4, win)
--#define PAB_PEX_AMAP_PEX_WIN_L(win)	PAB_REG_ADDR(0x4ba8, win)
--#define PAB_PEX_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x4bac, win)
--
--/* starting offset of INTX bits in status register */
--#define PAB_INTX_START			5
--
--/* supported number of MSI interrupts */
--#define PCI_NUM_MSI			16
--
--/* MSI registers */
--#define MSI_BASE_LO_OFFSET		0x04
--#define MSI_BASE_HI_OFFSET		0x08
--#define MSI_SIZE_OFFSET			0x0c
--#define MSI_ENABLE_OFFSET		0x14
--#define MSI_STATUS_OFFSET		0x18
--#define MSI_DATA_OFFSET			0x20
--#define MSI_ADDR_L_OFFSET		0x24
--#define MSI_ADDR_H_OFFSET		0x28
--
--/* outbound and inbound window definitions */
--#define WIN_NUM_0			0
--#define WIN_NUM_1			1
--#define CFG_WINDOW_TYPE			0
--#define IO_WINDOW_TYPE			1
--#define MEM_WINDOW_TYPE			2
--#define IB_WIN_SIZE			((u64)256 * 1024 * 1024 * 1024)
--#define MAX_PIO_WINDOWS			8
--
--/* Parameters for the waiting for link up routine */
--#define LINK_WAIT_MAX_RETRIES		10
--#define LINK_WAIT_MIN			90000
--#define LINK_WAIT_MAX			100000
--
--#define PAGED_ADDR_BNDRY		0xc00
--#define OFFSET_TO_PAGE_ADDR(off)	\
--	((off & PAGE_LO_MASK) | PAGED_ADDR_BNDRY)
--#define OFFSET_TO_PAGE_IDX(off)		\
--	((off >> PAGE_SEL_OFFSET_SHIFT) & PAGE_SEL_MASK)
--
--struct mobiveil_msi {			/* MSI information */
--	struct mutex lock;		/* protect bitmap variable */
--	struct irq_domain *msi_domain;
--	struct irq_domain *dev_domain;
--	phys_addr_t msi_pages_phys;
--	int num_of_vectors;
--	DECLARE_BITMAP(msi_irq_in_use, PCI_NUM_MSI);
--};
--
--struct mobiveil_pcie {
--	struct platform_device *pdev;
--	struct list_head resources;
--	void __iomem *config_axi_slave_base;	/* endpoint config base */
--	void __iomem *csr_axi_slave_base;	/* root port config base */
--	void __iomem *apb_csr_base;	/* MSI register base */
--	phys_addr_t pcie_reg_base;	/* Physical PCIe Controller Base */
--	struct irq_domain *intx_domain;
--	raw_spinlock_t intx_mask_lock;
--	int irq;
--	int apio_wins;
--	int ppio_wins;
--	int ob_wins_configured;		/* configured outbound windows */
--	int ib_wins_configured;		/* configured inbound windows */
--	struct resource *ob_io_res;
--	char root_bus_nr;
--	struct mobiveil_msi msi;
--};
--
--/*
-- * mobiveil_pcie_sel_page - routine to access paged register
-- *
-- * Registers whose address greater than PAGED_ADDR_BNDRY (0xc00) are paged,
-- * for this scheme to work extracted higher 6 bits of the offset will be
-- * written to pg_sel field of PAB_CTRL register and rest of the lower 10
-- * bits enabled with PAGED_ADDR_BNDRY are used as offset of the register.
-- */
--static void mobiveil_pcie_sel_page(struct mobiveil_pcie *pcie, u8 pg_idx)
--{
--	u32 val;
--
--	val = readl(pcie->csr_axi_slave_base + PAB_CTRL);
--	val &= ~(PAGE_SEL_MASK << PAGE_SEL_SHIFT);
--	val |= (pg_idx & PAGE_SEL_MASK) << PAGE_SEL_SHIFT;
--
--	writel(val, pcie->csr_axi_slave_base + PAB_CTRL);
--}
--
--static void *mobiveil_pcie_comp_addr(struct mobiveil_pcie *pcie, u32 off)
--{
--	if (off < PAGED_ADDR_BNDRY) {
--		/* For directly accessed registers, clear the pg_sel field */
--		mobiveil_pcie_sel_page(pcie, 0);
--		return pcie->csr_axi_slave_base + off;
--	}
--
--	mobiveil_pcie_sel_page(pcie, OFFSET_TO_PAGE_IDX(off));
--	return pcie->csr_axi_slave_base + OFFSET_TO_PAGE_ADDR(off);
--}
--
--static int mobiveil_pcie_read(void __iomem *addr, int size, u32 *val)
--{
--	if ((uintptr_t)addr & (size - 1)) {
--		*val = 0;
--		return PCIBIOS_BAD_REGISTER_NUMBER;
--	}
--
--	switch (size) {
--	case 4:
--		*val = readl(addr);
--		break;
--	case 2:
--		*val = readw(addr);
--		break;
--	case 1:
--		*val = readb(addr);
--		break;
--	default:
--		*val = 0;
--		return PCIBIOS_BAD_REGISTER_NUMBER;
--	}
--
--	return PCIBIOS_SUCCESSFUL;
--}
--
--static int mobiveil_pcie_write(void __iomem *addr, int size, u32 val)
--{
--	if ((uintptr_t)addr & (size - 1))
--		return PCIBIOS_BAD_REGISTER_NUMBER;
--
--	switch (size) {
--	case 4:
--		writel(val, addr);
--		break;
--	case 2:
--		writew(val, addr);
--		break;
--	case 1:
--		writeb(val, addr);
--		break;
--	default:
--		return PCIBIOS_BAD_REGISTER_NUMBER;
--	}
--
--	return PCIBIOS_SUCCESSFUL;
--}
--
--static u32 csr_read(struct mobiveil_pcie *pcie, u32 off, size_t size)
--{
--	void *addr;
--	u32 val;
--	int ret;
--
--	addr = mobiveil_pcie_comp_addr(pcie, off);
--
--	ret = mobiveil_pcie_read(addr, size, &val);
--	if (ret)
--		dev_err(&pcie->pdev->dev, "read CSR address failed\n");
--
--	return val;
--}
--
--static void csr_write(struct mobiveil_pcie *pcie, u32 val, u32 off, size_t size)
--{
--	void *addr;
--	int ret;
--
--	addr = mobiveil_pcie_comp_addr(pcie, off);
--
--	ret = mobiveil_pcie_write(addr, size, val);
--	if (ret)
--		dev_err(&pcie->pdev->dev, "write CSR address failed\n");
--}
--
--static u32 csr_readl(struct mobiveil_pcie *pcie, u32 off)
--{
--	return csr_read(pcie, off, 0x4);
--}
--
--static void csr_writel(struct mobiveil_pcie *pcie, u32 val, u32 off)
--{
--	csr_write(pcie, val, off, 0x4);
--}
--
--static bool mobiveil_pcie_link_up(struct mobiveil_pcie *pcie)
--{
--	return (csr_readl(pcie, LTSSM_STATUS) &
--		LTSSM_STATUS_L0_MASK) == LTSSM_STATUS_L0;
--}
--
--static bool mobiveil_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
--{
--	struct mobiveil_pcie *pcie = bus->sysdata;
--
--	/* Only one device down on each root port */
--	if ((bus->number == pcie->root_bus_nr) && (devfn > 0))
--		return false;
--
--	/*
--	 * Do not read more than one device on the bus directly
--	 * attached to RC
--	 */
--	if ((bus->primary == pcie->root_bus_nr) && (PCI_SLOT(devfn) > 0))
--		return false;
--
--	return true;
--}
--
--/*
-- * mobiveil_pcie_map_bus - routine to get the configuration base of either
-- * root port or endpoint
-- */
--static void __iomem *mobiveil_pcie_map_bus(struct pci_bus *bus,
--					   unsigned int devfn, int where)
--{
--	struct mobiveil_pcie *pcie = bus->sysdata;
--	u32 value;
--
--	if (!mobiveil_pcie_valid_device(bus, devfn))
--		return NULL;
--
--	/* RC config access */
--	if (bus->number == pcie->root_bus_nr)
--		return pcie->csr_axi_slave_base + where;
--
--	/*
--	 * EP config access (in Config/APIO space)
--	 * Program PEX Address base (31..16 bits) with appropriate value
--	 * (BDF) in PAB_AXI_AMAP_PEX_WIN_L0 Register.
--	 * Relies on pci_lock serialization
--	 */
--	value = bus->number << PAB_BUS_SHIFT |
--		PCI_SLOT(devfn) << PAB_DEVICE_SHIFT |
--		PCI_FUNC(devfn) << PAB_FUNCTION_SHIFT;
--
--	csr_writel(pcie, value, PAB_AXI_AMAP_PEX_WIN_L(WIN_NUM_0));
--
--	return pcie->config_axi_slave_base + where;
--}
--
--static struct pci_ops mobiveil_pcie_ops = {
--	.map_bus = mobiveil_pcie_map_bus,
--	.read = pci_generic_config_read,
--	.write = pci_generic_config_write,
--};
--
--static void mobiveil_pcie_isr(struct irq_desc *desc)
--{
--	struct irq_chip *chip = irq_desc_get_chip(desc);
--	struct mobiveil_pcie *pcie = irq_desc_get_handler_data(desc);
--	struct device *dev = &pcie->pdev->dev;
--	struct mobiveil_msi *msi = &pcie->msi;
--	u32 msi_data, msi_addr_lo, msi_addr_hi;
--	u32 intr_status, msi_status;
--	unsigned long shifted_status;
--	u32 bit, virq, val, mask;
--
--	/*
--	 * The core provides a single interrupt for both INTx/MSI messages.
--	 * So we'll read both INTx and MSI status
--	 */
--
--	chained_irq_enter(chip, desc);
--
--	/* read INTx status */
--	val = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT);
--	mask = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
--	intr_status = val & mask;
--
--	/* Handle INTx */
--	if (intr_status & PAB_INTP_INTX_MASK) {
--		shifted_status = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT);
--		shifted_status &= PAB_INTP_INTX_MASK;
--		shifted_status >>= PAB_INTX_START;
--		do {
--			for_each_set_bit(bit, &shifted_status, PCI_NUM_INTX) {
--				virq = irq_find_mapping(pcie->intx_domain,
--							bit + 1);
--				if (virq)
--					generic_handle_irq(virq);
--				else
--					dev_err_ratelimited(dev, "unexpected IRQ, INT%d\n",
--							    bit);
--
--				/* clear interrupt handled */
--				csr_writel(pcie, 1 << (PAB_INTX_START + bit),
--					   PAB_INTP_AMBA_MISC_STAT);
--			}
--
--			shifted_status = csr_readl(pcie,
--						   PAB_INTP_AMBA_MISC_STAT);
--			shifted_status &= PAB_INTP_INTX_MASK;
--			shifted_status >>= PAB_INTX_START;
--		} while (shifted_status != 0);
--	}
--
--	/* read extra MSI status register */
--	msi_status = readl_relaxed(pcie->apb_csr_base + MSI_STATUS_OFFSET);
--
--	/* handle MSI interrupts */
--	while (msi_status & 1) {
--		msi_data = readl_relaxed(pcie->apb_csr_base + MSI_DATA_OFFSET);
--
--		/*
--		 * MSI_STATUS_OFFSET register gets updated to zero
--		 * once we pop not only the MSI data but also address
--		 * from MSI hardware FIFO. So keeping these following
--		 * two dummy reads.
--		 */
--		msi_addr_lo = readl_relaxed(pcie->apb_csr_base +
--					    MSI_ADDR_L_OFFSET);
--		msi_addr_hi = readl_relaxed(pcie->apb_csr_base +
--					    MSI_ADDR_H_OFFSET);
--		dev_dbg(dev, "MSI registers, data: %08x, addr: %08x:%08x\n",
--			msi_data, msi_addr_hi, msi_addr_lo);
--
--		virq = irq_find_mapping(msi->dev_domain, msi_data);
--		if (virq)
--			generic_handle_irq(virq);
--
--		msi_status = readl_relaxed(pcie->apb_csr_base +
--					   MSI_STATUS_OFFSET);
--	}
--
--	/* Clear the interrupt status */
--	csr_writel(pcie, intr_status, PAB_INTP_AMBA_MISC_STAT);
--	chained_irq_exit(chip, desc);
--}
--
--static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie)
--{
--	struct device *dev = &pcie->pdev->dev;
--	struct platform_device *pdev = pcie->pdev;
--	struct device_node *node = dev->of_node;
--	struct resource *res;
--
--	/* map config resource */
--	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
--					   "config_axi_slave");
--	pcie->config_axi_slave_base = devm_pci_remap_cfg_resource(dev, res);
--	if (IS_ERR(pcie->config_axi_slave_base))
--		return PTR_ERR(pcie->config_axi_slave_base);
--	pcie->ob_io_res = res;
--
--	/* map csr resource */
--	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
--					   "csr_axi_slave");
--	pcie->csr_axi_slave_base = devm_pci_remap_cfg_resource(dev, res);
--	if (IS_ERR(pcie->csr_axi_slave_base))
--		return PTR_ERR(pcie->csr_axi_slave_base);
--	pcie->pcie_reg_base = res->start;
--
--	/* map MSI config resource */
--	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "apb_csr");
--	pcie->apb_csr_base = devm_pci_remap_cfg_resource(dev, res);
--	if (IS_ERR(pcie->apb_csr_base))
--		return PTR_ERR(pcie->apb_csr_base);
--
--	/* read the number of windows requested */
--	if (of_property_read_u32(node, "apio-wins", &pcie->apio_wins))
--		pcie->apio_wins = MAX_PIO_WINDOWS;
--
--	if (of_property_read_u32(node, "ppio-wins", &pcie->ppio_wins))
--		pcie->ppio_wins = MAX_PIO_WINDOWS;
--
--	pcie->irq = platform_get_irq(pdev, 0);
--	if (pcie->irq <= 0) {
--		dev_err(dev, "failed to map IRQ: %d\n", pcie->irq);
--		return -ENODEV;
--	}
--
--	return 0;
--}
--
--static void program_ib_windows(struct mobiveil_pcie *pcie, int win_num,
--			       u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
--{
--	u32 value;
--	u64 size64 = ~(size - 1);
--
--	if (win_num >= pcie->ppio_wins) {
--		dev_err(&pcie->pdev->dev,
--			"ERROR: max inbound windows reached !\n");
--		return;
--	}
--
--	value = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
--	value &= ~(AMAP_CTRL_TYPE_MASK << AMAP_CTRL_TYPE_SHIFT | WIN_SIZE_MASK);
--	value |= type << AMAP_CTRL_TYPE_SHIFT | 1 << AMAP_CTRL_EN_SHIFT |
--		 (lower_32_bits(size64) & WIN_SIZE_MASK);
--	csr_writel(pcie, value, PAB_PEX_AMAP_CTRL(win_num));
--
--	csr_writel(pcie, upper_32_bits(size64),
--		   PAB_EXT_PEX_AMAP_SIZEN(win_num));
--
--	csr_writel(pcie, lower_32_bits(cpu_addr),
--		   PAB_PEX_AMAP_AXI_WIN(win_num));
--	csr_writel(pcie, upper_32_bits(cpu_addr),
--		   PAB_EXT_PEX_AMAP_AXI_WIN(win_num));
--
--	csr_writel(pcie, lower_32_bits(pci_addr),
--		   PAB_PEX_AMAP_PEX_WIN_L(win_num));
--	csr_writel(pcie, upper_32_bits(pci_addr),
--		   PAB_PEX_AMAP_PEX_WIN_H(win_num));
--
--	pcie->ib_wins_configured++;
--}
--
--/*
-- * routine to program the outbound windows
-- */
--static void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
--			       u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
--{
--	u32 value;
--	u64 size64 = ~(size - 1);
--
--	if (win_num >= pcie->apio_wins) {
--		dev_err(&pcie->pdev->dev,
--			"ERROR: max outbound windows reached !\n");
--		return;
--	}
--
--	/*
--	 * program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit
--	 * to 4 KB in PAB_AXI_AMAP_CTRL register
--	 */
--	value = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num));
--	value &= ~(WIN_TYPE_MASK << WIN_TYPE_SHIFT | WIN_SIZE_MASK);
--	value |= 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
--		 (lower_32_bits(size64) & WIN_SIZE_MASK);
--	csr_writel(pcie, value, PAB_AXI_AMAP_CTRL(win_num));
--
--	csr_writel(pcie, upper_32_bits(size64), PAB_EXT_AXI_AMAP_SIZE(win_num));
--
--	/*
--	 * program AXI window base with appropriate value in
--	 * PAB_AXI_AMAP_AXI_WIN0 register
--	 */
--	csr_writel(pcie, lower_32_bits(cpu_addr) & (~AXI_WINDOW_ALIGN_MASK),
--		   PAB_AXI_AMAP_AXI_WIN(win_num));
--	csr_writel(pcie, upper_32_bits(cpu_addr),
--		   PAB_EXT_AXI_AMAP_AXI_WIN(win_num));
--
--	csr_writel(pcie, lower_32_bits(pci_addr),
--		   PAB_AXI_AMAP_PEX_WIN_L(win_num));
--	csr_writel(pcie, upper_32_bits(pci_addr),
--		   PAB_AXI_AMAP_PEX_WIN_H(win_num));
--
--	pcie->ob_wins_configured++;
--}
--
--static int mobiveil_bringup_link(struct mobiveil_pcie *pcie)
--{
--	int retries;
--
--	/* check if the link is up or not */
--	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
--		if (mobiveil_pcie_link_up(pcie))
--			return 0;
--
--		usleep_range(LINK_WAIT_MIN, LINK_WAIT_MAX);
--	}
--
--	dev_err(&pcie->pdev->dev, "link never came up\n");
--
--	return -ETIMEDOUT;
--}
--
--static void mobiveil_pcie_enable_msi(struct mobiveil_pcie *pcie)
--{
--	phys_addr_t msg_addr = pcie->pcie_reg_base;
--	struct mobiveil_msi *msi = &pcie->msi;
--
--	pcie->msi.num_of_vectors = PCI_NUM_MSI;
--	msi->msi_pages_phys = (phys_addr_t)msg_addr;
--
--	writel_relaxed(lower_32_bits(msg_addr),
--		       pcie->apb_csr_base + MSI_BASE_LO_OFFSET);
--	writel_relaxed(upper_32_bits(msg_addr),
--		       pcie->apb_csr_base + MSI_BASE_HI_OFFSET);
--	writel_relaxed(4096, pcie->apb_csr_base + MSI_SIZE_OFFSET);
--	writel_relaxed(1, pcie->apb_csr_base + MSI_ENABLE_OFFSET);
--}
--
--static int mobiveil_host_init(struct mobiveil_pcie *pcie)
--{
--	u32 value, pab_ctrl, type;
--	struct resource_entry *win;
--
--	/* setup bus numbers */
--	value = csr_readl(pcie, PCI_PRIMARY_BUS);
--	value &= 0xff000000;
--	value |= 0x00ff0100;
--	csr_writel(pcie, value, PCI_PRIMARY_BUS);
--
--	/*
--	 * program Bus Master Enable Bit in Command Register in PAB Config
--	 * Space
--	 */
--	value = csr_readl(pcie, PCI_COMMAND);
--	value |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
--	csr_writel(pcie, value, PCI_COMMAND);
--
--	/*
--	 * program PIO Enable Bit to 1 (and PEX PIO Enable to 1) in PAB_CTRL
--	 * register
--	 */
--	pab_ctrl = csr_readl(pcie, PAB_CTRL);
--	pab_ctrl |= (1 << AMBA_PIO_ENABLE_SHIFT) | (1 << PEX_PIO_ENABLE_SHIFT);
--	csr_writel(pcie, pab_ctrl, PAB_CTRL);
--
--	csr_writel(pcie, (PAB_INTP_INTX_MASK | PAB_INTP_MSI_MASK),
--		   PAB_INTP_AMBA_MISC_ENB);
--
--	/*
--	 * program PIO Enable Bit to 1 and Config Window Enable Bit to 1 in
--	 * PAB_AXI_PIO_CTRL Register
--	 */
--	value = csr_readl(pcie, PAB_AXI_PIO_CTRL);
--	value |= APIO_EN_MASK;
--	csr_writel(pcie, value, PAB_AXI_PIO_CTRL);
--
--	/* Enable PCIe PIO master */
--	value = csr_readl(pcie, PAB_PEX_PIO_CTRL);
--	value |= 1 << PIO_ENABLE_SHIFT;
--	csr_writel(pcie, value, PAB_PEX_PIO_CTRL);
--
--	/*
--	 * we'll program one outbound window for config reads and
--	 * another default inbound window for all the upstream traffic
--	 * rest of the outbound windows will be configured according to
--	 * the "ranges" field defined in device tree
--	 */
--
--	/* config outbound translation window */
--	program_ob_windows(pcie, WIN_NUM_0, pcie->ob_io_res->start, 0,
--			   CFG_WINDOW_TYPE, resource_size(pcie->ob_io_res));
--
--	/* memory inbound translation window */
--	program_ib_windows(pcie, WIN_NUM_0, 0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
--
--	/* Get the I/O and memory ranges from DT */
--	resource_list_for_each_entry(win, &pcie->resources) {
--		if (resource_type(win->res) == IORESOURCE_MEM)
--			type = MEM_WINDOW_TYPE;
--		else if (resource_type(win->res) == IORESOURCE_IO)
--			type = IO_WINDOW_TYPE;
--		else
--			continue;
--
--		/* configure outbound translation window */
--		program_ob_windows(pcie, pcie->ob_wins_configured,
--				   win->res->start,
--				   win->res->start - win->offset,
--				   type, resource_size(win->res));
--	}
--
--	/* fixup for PCIe class register */
--	value = csr_readl(pcie, PAB_INTP_AXI_PIO_CLASS);
--	value &= 0xff;
--	value |= (PCI_CLASS_BRIDGE_PCI << 16);
--	csr_writel(pcie, value, PAB_INTP_AXI_PIO_CLASS);
--
--	/* setup MSI hardware registers */
--	mobiveil_pcie_enable_msi(pcie);
--
--	return 0;
--}
--
--static void mobiveil_mask_intx_irq(struct irq_data *data)
--{
--	struct irq_desc *desc = irq_to_desc(data->irq);
--	struct mobiveil_pcie *pcie;
--	unsigned long flags;
--	u32 mask, shifted_val;
--
--	pcie = irq_desc_get_chip_data(desc);
--	mask = 1 << ((data->hwirq + PAB_INTX_START) - 1);
--	raw_spin_lock_irqsave(&pcie->intx_mask_lock, flags);
--	shifted_val = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
--	shifted_val &= ~mask;
--	csr_writel(pcie, shifted_val, PAB_INTP_AMBA_MISC_ENB);
--	raw_spin_unlock_irqrestore(&pcie->intx_mask_lock, flags);
--}
--
--static void mobiveil_unmask_intx_irq(struct irq_data *data)
--{
--	struct irq_desc *desc = irq_to_desc(data->irq);
--	struct mobiveil_pcie *pcie;
--	unsigned long flags;
--	u32 shifted_val, mask;
--
--	pcie = irq_desc_get_chip_data(desc);
--	mask = 1 << ((data->hwirq + PAB_INTX_START) - 1);
--	raw_spin_lock_irqsave(&pcie->intx_mask_lock, flags);
--	shifted_val = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
--	shifted_val |= mask;
--	csr_writel(pcie, shifted_val, PAB_INTP_AMBA_MISC_ENB);
--	raw_spin_unlock_irqrestore(&pcie->intx_mask_lock, flags);
--}
--
--static struct irq_chip intx_irq_chip = {
--	.name = "mobiveil_pcie:intx",
--	.irq_enable = mobiveil_unmask_intx_irq,
--	.irq_disable = mobiveil_mask_intx_irq,
--	.irq_mask = mobiveil_mask_intx_irq,
--	.irq_unmask = mobiveil_unmask_intx_irq,
--};
--
--/* routine to setup the INTx related data */
--static int mobiveil_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
--				  irq_hw_number_t hwirq)
--{
--	irq_set_chip_and_handler(irq, &intx_irq_chip, handle_level_irq);
--	irq_set_chip_data(irq, domain->host_data);
--
--	return 0;
--}
--
--/* INTx domain operations structure */
--static const struct irq_domain_ops intx_domain_ops = {
--	.map = mobiveil_pcie_intx_map,
--};
--
--static struct irq_chip mobiveil_msi_irq_chip = {
--	.name = "Mobiveil PCIe MSI",
--	.irq_mask = pci_msi_mask_irq,
--	.irq_unmask = pci_msi_unmask_irq,
--};
--
--static struct msi_domain_info mobiveil_msi_domain_info = {
--	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
--		   MSI_FLAG_PCI_MSIX),
--	.chip	= &mobiveil_msi_irq_chip,
--};
--
--static void mobiveil_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
--{
--	struct mobiveil_pcie *pcie = irq_data_get_irq_chip_data(data);
--	phys_addr_t addr = pcie->pcie_reg_base + (data->hwirq * sizeof(int));
--
--	msg->address_lo = lower_32_bits(addr);
--	msg->address_hi = upper_32_bits(addr);
--	msg->data = data->hwirq;
--
--	dev_dbg(&pcie->pdev->dev, "msi#%d address_hi %#x address_lo %#x\n",
--		(int)data->hwirq, msg->address_hi, msg->address_lo);
--}
--
--static int mobiveil_msi_set_affinity(struct irq_data *irq_data,
--				     const struct cpumask *mask, bool force)
--{
--	return -EINVAL;
--}
--
--static struct irq_chip mobiveil_msi_bottom_irq_chip = {
--	.name			= "Mobiveil MSI",
--	.irq_compose_msi_msg	= mobiveil_compose_msi_msg,
--	.irq_set_affinity	= mobiveil_msi_set_affinity,
--};
--
--static int mobiveil_irq_msi_domain_alloc(struct irq_domain *domain,
--					 unsigned int virq,
--					 unsigned int nr_irqs, void *args)
--{
--	struct mobiveil_pcie *pcie = domain->host_data;
--	struct mobiveil_msi *msi = &pcie->msi;
--	unsigned long bit;
--
--	WARN_ON(nr_irqs != 1);
--	mutex_lock(&msi->lock);
--
--	bit = find_first_zero_bit(msi->msi_irq_in_use, msi->num_of_vectors);
--	if (bit >= msi->num_of_vectors) {
--		mutex_unlock(&msi->lock);
--		return -ENOSPC;
--	}
--
--	set_bit(bit, msi->msi_irq_in_use);
--
--	mutex_unlock(&msi->lock);
--
--	irq_domain_set_info(domain, virq, bit, &mobiveil_msi_bottom_irq_chip,
--			    domain->host_data, handle_level_irq, NULL, NULL);
--	return 0;
--}
--
--static void mobiveil_irq_msi_domain_free(struct irq_domain *domain,
--					 unsigned int virq,
--					 unsigned int nr_irqs)
--{
--	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
--	struct mobiveil_pcie *pcie = irq_data_get_irq_chip_data(d);
--	struct mobiveil_msi *msi = &pcie->msi;
--
--	mutex_lock(&msi->lock);
--
--	if (!test_bit(d->hwirq, msi->msi_irq_in_use))
--		dev_err(&pcie->pdev->dev, "trying to free unused MSI#%lu\n",
--			d->hwirq);
--	else
--		__clear_bit(d->hwirq, msi->msi_irq_in_use);
--
--	mutex_unlock(&msi->lock);
--}
--static const struct irq_domain_ops msi_domain_ops = {
--	.alloc	= mobiveil_irq_msi_domain_alloc,
--	.free	= mobiveil_irq_msi_domain_free,
--};
--
--static int mobiveil_allocate_msi_domains(struct mobiveil_pcie *pcie)
--{
--	struct device *dev = &pcie->pdev->dev;
--	struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
--	struct mobiveil_msi *msi = &pcie->msi;
--
--	mutex_init(&pcie->msi.lock);
--	msi->dev_domain = irq_domain_add_linear(NULL, msi->num_of_vectors,
--						&msi_domain_ops, pcie);
--	if (!msi->dev_domain) {
--		dev_err(dev, "failed to create IRQ domain\n");
--		return -ENOMEM;
--	}
--
--	msi->msi_domain = pci_msi_create_irq_domain(fwnode,
--						    &mobiveil_msi_domain_info,
--						    msi->dev_domain);
--	if (!msi->msi_domain) {
--		dev_err(dev, "failed to create MSI domain\n");
--		irq_domain_remove(msi->dev_domain);
--		return -ENOMEM;
--	}
--
--	return 0;
--}
--
--static int mobiveil_pcie_init_irq_domain(struct mobiveil_pcie *pcie)
--{
--	struct device *dev = &pcie->pdev->dev;
--	struct device_node *node = dev->of_node;
--	int ret;
--
--	/* setup INTx */
--	pcie->intx_domain = irq_domain_add_linear(node, PCI_NUM_INTX,
--						  &intx_domain_ops, pcie);
--
--	if (!pcie->intx_domain) {
--		dev_err(dev, "Failed to get a INTx IRQ domain\n");
--		return -ENOMEM;
--	}
--
--	raw_spin_lock_init(&pcie->intx_mask_lock);
--
--	/* setup MSI */
--	ret = mobiveil_allocate_msi_domains(pcie);
--	if (ret)
--		return ret;
--
--	return 0;
--}
--
--static int mobiveil_pcie_probe(struct platform_device *pdev)
--{
--	struct mobiveil_pcie *pcie;
--	struct pci_bus *bus;
--	struct pci_bus *child;
--	struct pci_host_bridge *bridge;
--	struct device *dev = &pdev->dev;
--	resource_size_t iobase;
--	int ret;
--
--	/* allocate the PCIe port */
--	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
--	if (!bridge)
--		return -ENOMEM;
--
--	pcie = pci_host_bridge_priv(bridge);
--
--	pcie->pdev = pdev;
--
--	ret = mobiveil_pcie_parse_dt(pcie);
--	if (ret) {
--		dev_err(dev, "Parsing DT failed, ret: %x\n", ret);
--		return ret;
--	}
--
--	INIT_LIST_HEAD(&pcie->resources);
--
--	/* parse the host bridge base addresses from the device tree file */
--	ret = devm_of_pci_get_host_bridge_resources(dev, 0, 0xff,
--						    &pcie->resources, &iobase);
--	if (ret) {
--		dev_err(dev, "Getting bridge resources failed\n");
--		return ret;
--	}
--
--	/*
--	 * configure all inbound and outbound windows and prepare the RC for
--	 * config access
--	 */
--	ret = mobiveil_host_init(pcie);
--	if (ret) {
--		dev_err(dev, "Failed to initialize host\n");
--		goto error;
--	}
--
--	/* initialize the IRQ domains */
--	ret = mobiveil_pcie_init_irq_domain(pcie);
--	if (ret) {
--		dev_err(dev, "Failed creating IRQ Domain\n");
--		goto error;
--	}
--
--	irq_set_chained_handler_and_data(pcie->irq, mobiveil_pcie_isr, pcie);
--
--	ret = devm_request_pci_bus_resources(dev, &pcie->resources);
--	if (ret)
--		goto error;
--
--	/* Initialize bridge */
--	list_splice_init(&pcie->resources, &bridge->windows);
--	bridge->dev.parent = dev;
--	bridge->sysdata = pcie;
--	bridge->busnr = pcie->root_bus_nr;
--	bridge->ops = &mobiveil_pcie_ops;
--	bridge->map_irq = of_irq_parse_and_map_pci;
--	bridge->swizzle_irq = pci_common_swizzle;
--
--	ret = mobiveil_bringup_link(pcie);
--	if (ret) {
--		dev_info(dev, "link bring-up failed\n");
--		goto error;
--	}
--
--	/* setup the kernel resources for the newly added PCIe root bus */
--	ret = pci_scan_root_bus_bridge(bridge);
--	if (ret)
--		goto error;
--
--	bus = bridge->bus;
--
--	pci_assign_unassigned_bus_resources(bus);
--	list_for_each_entry(child, &bus->children, node)
--		pcie_bus_configure_settings(child);
--	pci_bus_add_devices(bus);
--
--	return 0;
--error:
--	pci_free_resource_list(&pcie->resources);
--	return ret;
--}
--
--static const struct of_device_id mobiveil_pcie_of_match[] = {
--	{.compatible = "mbvl,gpex40-pcie",},
--	{},
--};
--
--MODULE_DEVICE_TABLE(of, mobiveil_pcie_of_match);
--
--static struct platform_driver mobiveil_pcie_driver = {
--	.probe = mobiveil_pcie_probe,
--	.driver = {
--		.name = "mobiveil-pcie",
--		.of_match_table = mobiveil_pcie_of_match,
--		.suppress_bind_attrs = true,
--	},
--};
--
--builtin_platform_driver(mobiveil_pcie_driver);
--
--MODULE_LICENSE("GPL v2");
--MODULE_DESCRIPTION("Mobiveil PCIe host controller driver");
--MODULE_AUTHOR("Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>");
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0010-PCI-mobiveil-Make-mobiveil_host_init-can-be-used-to-.patch b/target/linux/layerscape/patches-5.4/812-pcie-0010-PCI-mobiveil-Make-mobiveil_host_init-can-be-used-to-.patch
deleted file mode 100644
index e38eca5b8f..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0010-PCI-mobiveil-Make-mobiveil_host_init-can-be-used-to-.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-From d4bb5e0d43909758046c527d883405f556de85fa Mon Sep 17 00:00:00 2001
-From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-Date: Tue, 25 Jun 2019 09:09:14 +0000
-Subject: [PATCH] PCI: mobiveil: Make mobiveil_host_init() can be used to
- re-init host
-
-Make the mobiveil_host_init() function can be used to re-init
-host controller's PAB and GPEX CSR register block, as NXP
-integrated Mobiveil IP has to reset and then re-init the PAB
-and GPEX CSR registers upon hot-reset.
-
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
----
- .../pci/controller/mobiveil/pcie-mobiveil-host.c   | 43 +++++++++++-----------
- drivers/pci/controller/mobiveil/pcie-mobiveil.h    |  3 +-
- 2 files changed, 24 insertions(+), 22 deletions(-)
-
---- a/drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
-+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
-@@ -215,16 +215,21 @@ static void mobiveil_pcie_enable_msi(str
- 	writel_relaxed(1, pcie->apb_csr_base + MSI_ENABLE_OFFSET);
- }
- 
--static int mobiveil_host_init(struct mobiveil_pcie *pcie)
-+int mobiveil_host_init(struct mobiveil_pcie *pcie, bool reinit)
- {
- 	u32 value, pab_ctrl, type;
- 	struct resource_entry *win;
- 
--	/* setup bus numbers */
--	value = csr_readl(pcie, PCI_PRIMARY_BUS);
--	value &= 0xff000000;
--	value |= 0x00ff0100;
--	csr_writel(pcie, value, PCI_PRIMARY_BUS);
-+	pcie->ib_wins_configured = 0;
-+	pcie->ob_wins_configured = 0;
-+
-+	if (!reinit) {
-+		/* setup bus numbers */
-+		value = csr_readl(pcie, PCI_PRIMARY_BUS);
-+		value &= 0xff000000;
-+		value |= 0x00ff0100;
-+		csr_writel(pcie, value, PCI_PRIMARY_BUS);
-+	}
- 
- 	/*
- 	 * program Bus Master Enable Bit in Command Register in PAB Config
-@@ -270,7 +275,7 @@ static int mobiveil_host_init(struct mob
- 	program_ib_windows(pcie, WIN_NUM_0, 0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
- 
- 	/* Get the I/O and memory ranges from DT */
--	resource_list_for_each_entry(win, &pcie->resources) {
-+	resource_list_for_each_entry(win, pcie->resources) {
- 		if (resource_type(win->res) == IORESOURCE_MEM) {
- 			type = MEM_WINDOW_TYPE;
- 		} else if (resource_type(win->res) == IORESOURCE_IO) {
-@@ -541,8 +546,6 @@ int mobiveil_pcie_host_probe(struct mobi
- 	resource_size_t iobase;
- 	int ret;
- 
--	INIT_LIST_HEAD(&pcie->resources);
--
- 	ret = mobiveil_pcie_parse_dt(pcie);
- 	if (ret) {
- 		dev_err(dev, "Parsing DT failed, ret: %x\n", ret);
-@@ -551,34 +554,35 @@ int mobiveil_pcie_host_probe(struct mobi
- 
- 	/* parse the host bridge base addresses from the device tree file */
- 	ret = devm_of_pci_get_host_bridge_resources(dev, 0, 0xff,
--						    &pcie->resources, &iobase);
-+						    &bridge->windows, &iobase);
- 	if (ret) {
- 		dev_err(dev, "Getting bridge resources failed\n");
- 		return ret;
- 	}
- 
-+	pcie->resources = &bridge->windows;
-+
- 	/*
- 	 * configure all inbound and outbound windows and prepare the RC for
- 	 * config access
- 	 */
--	ret = mobiveil_host_init(pcie);
-+	ret = mobiveil_host_init(pcie, false);
- 	if (ret) {
- 		dev_err(dev, "Failed to initialize host\n");
--		goto error;
-+		return ret;
- 	}
- 
- 	ret = mobiveil_pcie_interrupt_init(pcie);
- 	if (ret) {
- 		dev_err(dev, "Interrupt init failed\n");
--		goto error;
-+		return ret;
- 	}
- 
--	ret = devm_request_pci_bus_resources(dev, &pcie->resources);
-+	ret = devm_request_pci_bus_resources(dev, pcie->resources);
- 	if (ret)
--		goto error;
-+		return ret;
- 
- 	/* Initialize bridge */
--	list_splice_init(&pcie->resources, &bridge->windows);
- 	bridge->dev.parent = dev;
- 	bridge->sysdata = pcie;
- 	bridge->busnr = pcie->rp.root_bus_nr;
-@@ -589,13 +593,13 @@ int mobiveil_pcie_host_probe(struct mobi
- 	ret = mobiveil_bringup_link(pcie);
- 	if (ret) {
- 		dev_info(dev, "link bring-up failed\n");
--		goto error;
-+		return ret;
- 	}
- 
- 	/* setup the kernel resources for the newly added PCIe root bus */
- 	ret = pci_scan_root_bus_bridge(bridge);
- 	if (ret)
--		goto error;
-+		return ret;
- 
- 	bus = bridge->bus;
- 
-@@ -605,7 +609,4 @@ int mobiveil_pcie_host_probe(struct mobi
- 	pci_bus_add_devices(bus);
- 
- 	return 0;
--error:
--	pci_free_resource_list(&pcie->resources);
--	return ret;
- }
---- a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
-+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
-@@ -153,7 +153,7 @@ struct mobiveil_pab_ops {
- 
- struct mobiveil_pcie {
- 	struct platform_device *pdev;
--	struct list_head resources;
-+	struct list_head *resources;
- 	void __iomem *csr_axi_slave_base;	/* PAB registers base */
- 	phys_addr_t pcie_reg_base;	/* Physical PCIe Controller Base */
- 	void __iomem *apb_csr_base;	/* MSI register base */
-@@ -167,6 +167,7 @@ struct mobiveil_pcie {
- };
- 
- int mobiveil_pcie_host_probe(struct mobiveil_pcie *pcie);
-+int mobiveil_host_init(struct mobiveil_pcie *pcie, bool reinit);
- bool mobiveil_pcie_link_up(struct mobiveil_pcie *pcie);
- int mobiveil_bringup_link(struct mobiveil_pcie *pcie);
- void program_ob_windows(struct mobiveil_pcie *pcie, int win_num, u64 cpu_addr,
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0011-PCI-mobiveil-Add-8-bit-and-16-bit-CSR-register-acces.patch b/target/linux/layerscape/patches-5.4/812-pcie-0011-PCI-mobiveil-Add-8-bit-and-16-bit-CSR-register-acces.patch
deleted file mode 100644
index ee8c519520..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0011-PCI-mobiveil-Add-8-bit-and-16-bit-CSR-register-acces.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 7e92994ec22c9d337f6012ac913e7958012ad52e Mon Sep 17 00:00:00 2001
-From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-Date: Tue, 25 Jun 2019 09:09:28 +0000
-Subject: [PATCH] PCI: mobiveil: Add 8-bit and 16-bit CSR register accessors
-
-There are some 8-bit and 16-bit registers in PCIe configuration
-space, so add these accessors accordingly.
-
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
-Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
----
- drivers/pci/controller/mobiveil/pcie-mobiveil.h | 20 ++++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
---- a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
-+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
-@@ -182,9 +182,29 @@ static inline u32 csr_readl(struct mobiv
- 	return csr_read(pcie, off, 0x4);
- }
- 
-+static inline u32 csr_readw(struct mobiveil_pcie *pcie, u32 off)
-+{
-+	return csr_read(pcie, off, 0x2);
-+}
-+
-+static inline u32 csr_readb(struct mobiveil_pcie *pcie, u32 off)
-+{
-+	return csr_read(pcie, off, 0x1);
-+}
-+
- static inline void csr_writel(struct mobiveil_pcie *pcie, u32 val, u32 off)
- {
- 	csr_write(pcie, val, off, 0x4);
- }
- 
-+static inline void csr_writew(struct mobiveil_pcie *pcie, u32 val, u32 off)
-+{
-+	csr_write(pcie, val, off, 0x2);
-+}
-+
-+static inline void csr_writeb(struct mobiveil_pcie *pcie, u32 val, u32 off)
-+{
-+	csr_write(pcie, val, off, 0x1);
-+}
-+
- #endif /* _PCIE_MOBIVEIL_H */
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0012-PCI-mobiveil-Add-PCIe-Gen4-RC-driver-for-NXP-Layersc.patch b/target/linux/layerscape/patches-5.4/812-pcie-0012-PCI-mobiveil-Add-PCIe-Gen4-RC-driver-for-NXP-Layersc.patch
deleted file mode 100644
index 33e01c1df8..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0012-PCI-mobiveil-Add-PCIe-Gen4-RC-driver-for-NXP-Layersc.patch
+++ /dev/null
@@ -1,355 +0,0 @@
-From 68b6fec37f4c6fa382da4b76039743c4de89b028 Mon Sep 17 00:00:00 2001
-From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-Date: Tue, 25 Jun 2019 09:09:35 +0000
-Subject: [PATCH] PCI: mobiveil: Add PCIe Gen4 RC driver for NXP Layerscape
- SoCs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This PCIe controller is based on the Mobiveil GPEX IP, which is
-compatible with the PCI Expressâ„¢ Base Specification, Revision 4.0.
-
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
----
- drivers/pci/controller/mobiveil/Kconfig            |  10 +
- drivers/pci/controller/mobiveil/Makefile           |   1 +
- .../pci/controller/mobiveil/pcie-layerscape-gen4.c | 274 +++++++++++++++++++++
- drivers/pci/controller/mobiveil/pcie-mobiveil.h    |  16 +-
- 4 files changed, 299 insertions(+), 2 deletions(-)
- create mode 100644 drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
-
---- a/drivers/pci/controller/mobiveil/Kconfig
-+++ b/drivers/pci/controller/mobiveil/Kconfig
-@@ -21,4 +21,14 @@ config PCIE_MOBIVEIL_PLAT
- 	  Soft IP. It has up to 8 outbound and inbound windows
- 	  for address translation and it is a PCIe Gen4 IP.
- 
-+config PCIE_LAYERSCAPE_GEN4
-+	bool "Freescale Layerscape PCIe Gen4 controller"
-+	depends on PCI
-+	depends on OF && (ARM64 || ARCH_LAYERSCAPE)
-+	depends on PCI_MSI_IRQ_DOMAIN
-+	select PCIE_MOBIVEIL_HOST
-+	help
-+	  Say Y here if you want PCIe Gen4 controller support on
-+	  Layerscape SoCs. The PCIe controller can work in RC or
-+	  EP mode according to RCW[HOST_AGT_PEX] setting.
- endmenu
---- a/drivers/pci/controller/mobiveil/Makefile
-+++ b/drivers/pci/controller/mobiveil/Makefile
-@@ -2,3 +2,4 @@
- obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
- obj-$(CONFIG_PCIE_MOBIVEIL_HOST) += pcie-mobiveil-host.o
- obj-$(CONFIG_PCIE_MOBIVEIL_PLAT) += pcie-mobiveil-plat.o
-+obj-$(CONFIG_PCIE_LAYERSCAPE_GEN4) += pcie-layerscape-gen4.o
---- /dev/null
-+++ b/drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
-@@ -0,0 +1,274 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * PCIe Gen4 host controller driver for NXP Layerscape SoCs
-+ *
-+ * Copyright 2019 NXP
-+ *
-+ * Author: Zhiqiang Hou <Zhiqiang.Hou@nxp.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/interrupt.h>
-+#include <linux/init.h>
-+#include <linux/of_pci.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/resource.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/regmap.h>
-+
-+#include "pcie-mobiveil.h"
-+
-+/* LUT and PF control registers */
-+#define PCIE_LUT_OFF			0x80000
-+#define PCIE_PF_OFF			0xc0000
-+#define PCIE_PF_INT_STAT		0x18
-+#define PF_INT_STAT_PABRST		BIT(31)
-+
-+#define PCIE_PF_DBG			0x7fc
-+#define PF_DBG_LTSSM_MASK		0x3f
-+#define PF_DBG_LTSSM_L0			0x2d /* L0 state */
-+#define PF_DBG_WE			BIT(31)
-+#define PF_DBG_PABR			BIT(27)
-+
-+#define to_ls_pcie_g4(x)		platform_get_drvdata((x)->pdev)
-+
-+struct ls_pcie_g4 {
-+	struct mobiveil_pcie pci;
-+	struct delayed_work dwork;
-+	int irq;
-+};
-+
-+static inline u32 ls_pcie_g4_lut_readl(struct ls_pcie_g4 *pcie, u32 off)
-+{
-+	return ioread32(pcie->pci.csr_axi_slave_base + PCIE_LUT_OFF + off);
-+}
-+
-+static inline void ls_pcie_g4_lut_writel(struct ls_pcie_g4 *pcie,
-+					 u32 off, u32 val)
-+{
-+	iowrite32(val, pcie->pci.csr_axi_slave_base + PCIE_LUT_OFF + off);
-+}
-+
-+static inline u32 ls_pcie_g4_pf_readl(struct ls_pcie_g4 *pcie, u32 off)
-+{
-+	return ioread32(pcie->pci.csr_axi_slave_base + PCIE_PF_OFF + off);
-+}
-+
-+static inline void ls_pcie_g4_pf_writel(struct ls_pcie_g4 *pcie,
-+					u32 off, u32 val)
-+{
-+	iowrite32(val, pcie->pci.csr_axi_slave_base + PCIE_PF_OFF + off);
-+}
-+
-+static bool ls_pcie_g4_is_bridge(struct ls_pcie_g4 *pcie)
-+{
-+	struct mobiveil_pcie *mv_pci = &pcie->pci;
-+	u32 header_type;
-+
-+	header_type = csr_readb(mv_pci, PCI_HEADER_TYPE);
-+	header_type &= 0x7f;
-+
-+	return header_type == PCI_HEADER_TYPE_BRIDGE;
-+}
-+
-+static int ls_pcie_g4_link_up(struct mobiveil_pcie *pci)
-+{
-+	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(pci);
-+	u32 state;
-+
-+	state = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
-+	state =	state & PF_DBG_LTSSM_MASK;
-+
-+	if (state == PF_DBG_LTSSM_L0)
-+		return 1;
-+
-+	return 0;
-+}
-+
-+static void ls_pcie_g4_disable_interrupt(struct ls_pcie_g4 *pcie)
-+{
-+	struct mobiveil_pcie *mv_pci = &pcie->pci;
-+
-+	csr_writel(mv_pci, 0, PAB_INTP_AMBA_MISC_ENB);
-+}
-+
-+static void ls_pcie_g4_enable_interrupt(struct ls_pcie_g4 *pcie)
-+{
-+	struct mobiveil_pcie *mv_pci = &pcie->pci;
-+	u32 val;
-+
-+	/* Clear the interrupt status */
-+	csr_writel(mv_pci, 0xffffffff, PAB_INTP_AMBA_MISC_STAT);
-+
-+	val = PAB_INTP_INTX_MASK | PAB_INTP_MSI | PAB_INTP_RESET |
-+	      PAB_INTP_PCIE_UE | PAB_INTP_IE_PMREDI | PAB_INTP_IE_EC;
-+	csr_writel(mv_pci, val, PAB_INTP_AMBA_MISC_ENB);
-+}
-+
-+static void ls_pcie_g4_reinit_hw(struct ls_pcie_g4 *pcie)
-+{
-+	struct mobiveil_pcie *mv_pci = &pcie->pci;
-+	struct device *dev = &mv_pci->pdev->dev;
-+	u32 val, act_stat;
-+	int to = 100;
-+
-+	/* Poll for pab_csb_reset to set and PAB activity to clear */
-+	do {
-+		usleep_range(10, 15);
-+		val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_INT_STAT);
-+		act_stat = csr_readl(mv_pci, PAB_ACTIVITY_STAT);
-+	} while (((val & PF_INT_STAT_PABRST) == 0 || act_stat) && to--);
-+	if (to < 0) {
-+		dev_err(dev, "Poll PABRST&PABACT timeout\n");
-+		return;
-+	}
-+
-+	/* clear PEX_RESET bit in PEX_PF0_DBG register */
-+	val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
-+	val |= PF_DBG_WE;
-+	ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val);
-+
-+	val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
-+	val |= PF_DBG_PABR;
-+	ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val);
-+
-+	val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
-+	val &= ~PF_DBG_WE;
-+	ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val);
-+
-+	mobiveil_host_init(mv_pci, true);
-+
-+	to = 100;
-+	while (!ls_pcie_g4_link_up(mv_pci) && to--)
-+		usleep_range(200, 250);
-+	if (to < 0)
-+		dev_err(dev, "PCIe link training timeout\n");
-+}
-+
-+static irqreturn_t ls_pcie_g4_isr(int irq, void *dev_id)
-+{
-+	struct ls_pcie_g4 *pcie = (struct ls_pcie_g4 *)dev_id;
-+	struct mobiveil_pcie *mv_pci = &pcie->pci;
-+	u32 val;
-+
-+	val = csr_readl(mv_pci, PAB_INTP_AMBA_MISC_STAT);
-+	if (!val)
-+		return IRQ_NONE;
-+
-+	if (val & PAB_INTP_RESET) {
-+		ls_pcie_g4_disable_interrupt(pcie);
-+		schedule_delayed_work(&pcie->dwork, msecs_to_jiffies(1));
-+	}
-+
-+	csr_writel(mv_pci, val, PAB_INTP_AMBA_MISC_STAT);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int ls_pcie_g4_interrupt_init(struct mobiveil_pcie *mv_pci)
-+{
-+	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(mv_pci);
-+	struct platform_device *pdev = mv_pci->pdev;
-+	struct device *dev = &pdev->dev;
-+	int ret;
-+
-+	pcie->irq = platform_get_irq_byname(pdev, "intr");
-+	if (pcie->irq < 0) {
-+		dev_err(dev, "Can't get 'intr' IRQ, errno = %d\n", pcie->irq);
-+		return pcie->irq;
-+	}
-+	ret = devm_request_irq(dev, pcie->irq, ls_pcie_g4_isr,
-+			       IRQF_SHARED, pdev->name, pcie);
-+	if (ret) {
-+		dev_err(dev, "Can't register PCIe IRQ, errno = %d\n", ret);
-+		return  ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static void ls_pcie_g4_reset(struct work_struct *work)
-+{
-+	struct delayed_work *dwork = container_of(work, struct delayed_work,
-+						  work);
-+	struct ls_pcie_g4 *pcie = container_of(dwork, struct ls_pcie_g4, dwork);
-+	struct mobiveil_pcie *mv_pci = &pcie->pci;
-+	u16 ctrl;
-+
-+	ctrl = csr_readw(mv_pci, PCI_BRIDGE_CONTROL);
-+	ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
-+	csr_writew(mv_pci, ctrl, PCI_BRIDGE_CONTROL);
-+	ls_pcie_g4_reinit_hw(pcie);
-+	ls_pcie_g4_enable_interrupt(pcie);
-+}
-+
-+static struct mobiveil_rp_ops ls_pcie_g4_rp_ops = {
-+	.interrupt_init = ls_pcie_g4_interrupt_init,
-+};
-+
-+static const struct mobiveil_pab_ops ls_pcie_g4_pab_ops = {
-+	.link_up = ls_pcie_g4_link_up,
-+};
-+
-+static int __init ls_pcie_g4_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct pci_host_bridge *bridge;
-+	struct mobiveil_pcie *mv_pci;
-+	struct ls_pcie_g4 *pcie;
-+	struct device_node *np = dev->of_node;
-+	int ret;
-+
-+	if (!of_parse_phandle(np, "msi-parent", 0)) {
-+		dev_err(dev, "Failed to find msi-parent\n");
-+		return -EINVAL;
-+	}
-+
-+	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
-+	if (!bridge)
-+		return -ENOMEM;
-+
-+	pcie = pci_host_bridge_priv(bridge);
-+	mv_pci = &pcie->pci;
-+
-+	mv_pci->pdev = pdev;
-+	mv_pci->ops = &ls_pcie_g4_pab_ops;
-+	mv_pci->rp.ops = &ls_pcie_g4_rp_ops;
-+	mv_pci->bridge = bridge;
-+
-+	platform_set_drvdata(pdev, pcie);
-+
-+	INIT_DELAYED_WORK(&pcie->dwork, ls_pcie_g4_reset);
-+
-+	ret = mobiveil_pcie_host_probe(mv_pci);
-+	if (ret) {
-+		dev_err(dev, "Fail to probe\n");
-+		return  ret;
-+	}
-+
-+	if (!ls_pcie_g4_is_bridge(pcie))
-+		return -ENODEV;
-+
-+	ls_pcie_g4_enable_interrupt(pcie);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id ls_pcie_g4_of_match[] = {
-+	{ .compatible = "fsl,lx2160a-pcie", },
-+	{ },
-+};
-+
-+static struct platform_driver ls_pcie_g4_driver = {
-+	.driver = {
-+		.name = "layerscape-pcie-gen4",
-+		.of_match_table = ls_pcie_g4_of_match,
-+		.suppress_bind_attrs = true,
-+	},
-+};
-+
-+builtin_platform_driver_probe(ls_pcie_g4_driver, ls_pcie_g4_probe);
---- a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
-+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
-@@ -43,6 +43,8 @@
- #define  PAGE_LO_MASK			0x3ff
- #define  PAGE_SEL_OFFSET_SHIFT		10
- 
-+#define PAB_ACTIVITY_STAT		0x81c
-+
- #define PAB_AXI_PIO_CTRL		0x0840
- #define  APIO_EN_MASK			0xf
- 
-@@ -51,8 +53,18 @@
- 
- #define PAB_INTP_AMBA_MISC_ENB		0x0b0c
- #define PAB_INTP_AMBA_MISC_STAT		0x0b1c
--#define  PAB_INTP_INTX_MASK		0x01e0
--#define  PAB_INTP_MSI_MASK		0x8
-+#define  PAB_INTP_RESET			BIT(1)
-+#define  PAB_INTP_MSI			BIT(3)
-+#define  PAB_INTP_INTA			BIT(5)
-+#define  PAB_INTP_INTB			BIT(6)
-+#define  PAB_INTP_INTC			BIT(7)
-+#define  PAB_INTP_INTD			BIT(8)
-+#define  PAB_INTP_PCIE_UE		BIT(9)
-+#define  PAB_INTP_IE_PMREDI		BIT(29)
-+#define  PAB_INTP_IE_EC			BIT(30)
-+#define  PAB_INTP_MSI_MASK		PAB_INTP_MSI
-+#define  PAB_INTP_INTX_MASK		(PAB_INTP_INTA | PAB_INTP_INTB |\
-+					PAB_INTP_INTC | PAB_INTP_INTD)
- 
- #define PAB_AXI_AMAP_CTRL(win)		PAB_REG_ADDR(0x0ba0, win)
- #define  WIN_ENABLE_SHIFT		0
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0013-PCI-mobiveil-ls_pcie_g4-add-Workaround-for-A-011577.patch b/target/linux/layerscape/patches-5.4/812-pcie-0013-PCI-mobiveil-ls_pcie_g4-add-Workaround-for-A-011577.patch
deleted file mode 100644
index 6171a621f6..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0013-PCI-mobiveil-ls_pcie_g4-add-Workaround-for-A-011577.patch
+++ /dev/null
@@ -1,150 +0,0 @@
-From 7f38d09c9fd7906cea160e198299a7e378f9c796 Mon Sep 17 00:00:00 2001
-From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-Date: Tue, 6 Nov 2018 09:44:05 +0800
-Subject: [PATCH] PCI: mobiveil: ls_pcie_g4: add Workaround for A-011577
-
-PCIe configuration access to non-existent function triggered
-SERROR interrupt exception.
-
-Workaround:
-Disable error reporting on AXI bus during the Vendor ID read
-transactions in enumeration.
-
-This ERRATA is only for LX2160A Rev1.0, and it will be fixed
-in Rev2.0.
-
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
----
- .../pci/controller/mobiveil/pcie-layerscape-gen4.c | 36 ++++++++++++++++++++++
- .../pci/controller/mobiveil/pcie-mobiveil-host.c   | 17 +++++++++-
- drivers/pci/controller/mobiveil/pcie-mobiveil.h    |  3 ++
- 3 files changed, 55 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
-+++ b/drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
-@@ -22,8 +22,12 @@
- 
- #include "pcie-mobiveil.h"
- 
-+#define REV_1_0				(0x10)
-+
- /* LUT and PF control registers */
- #define PCIE_LUT_OFF			0x80000
-+#define PCIE_LUT_GCR			(0x28)
-+#define PCIE_LUT_GCR_RRE		(0)
- #define PCIE_PF_OFF			0xc0000
- #define PCIE_PF_INT_STAT		0x18
- #define PF_INT_STAT_PABRST		BIT(31)
-@@ -40,6 +44,7 @@ struct ls_pcie_g4 {
- 	struct mobiveil_pcie pci;
- 	struct delayed_work dwork;
- 	int irq;
-+	u8 rev;
- };
- 
- static inline u32 ls_pcie_g4_lut_readl(struct ls_pcie_g4 *pcie, u32 off)
-@@ -75,6 +80,15 @@ static bool ls_pcie_g4_is_bridge(struct
- 	return header_type == PCI_HEADER_TYPE_BRIDGE;
- }
- 
-+static int ls_pcie_g4_host_init(struct mobiveil_pcie *pci)
-+{
-+	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(pci);
-+
-+	pcie->rev = csr_readb(pci, PCI_REVISION_ID);
-+
-+	return 0;
-+}
-+
- static int ls_pcie_g4_link_up(struct mobiveil_pcie *pci)
- {
- 	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(pci);
-@@ -206,12 +220,34 @@ static void ls_pcie_g4_reset(struct work
- 	ls_pcie_g4_enable_interrupt(pcie);
- }
- 
-+static int ls_pcie_g4_read_other_conf(struct pci_bus *bus, unsigned int devfn,
-+				   int where, int size, u32 *val)
-+{
-+	struct mobiveil_pcie *pci = bus->sysdata;
-+	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(pci);
-+	int ret;
-+
-+	if (pcie->rev == REV_1_0 && where == PCI_VENDOR_ID)
-+		ls_pcie_g4_lut_writel(pcie, PCIE_LUT_GCR,
-+				      0 << PCIE_LUT_GCR_RRE);
-+
-+	ret = pci_generic_config_read(bus, devfn, where, size, val);
-+
-+	if (pcie->rev == REV_1_0 && where == PCI_VENDOR_ID)
-+		ls_pcie_g4_lut_writel(pcie, PCIE_LUT_GCR,
-+				      1 << PCIE_LUT_GCR_RRE);
-+
-+	return ret;
-+}
-+
- static struct mobiveil_rp_ops ls_pcie_g4_rp_ops = {
- 	.interrupt_init = ls_pcie_g4_interrupt_init,
-+	.read_other_conf = ls_pcie_g4_read_other_conf,
- };
- 
- static const struct mobiveil_pab_ops ls_pcie_g4_pab_ops = {
- 	.link_up = ls_pcie_g4_link_up,
-+	.host_init = ls_pcie_g4_host_init,
- };
- 
- static int __init ls_pcie_g4_probe(struct platform_device *pdev)
---- a/drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
-+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
-@@ -77,9 +77,20 @@ static void __iomem *mobiveil_pcie_map_b
- 	return pcie->rp.config_axi_slave_base + where;
- }
- 
-+static int mobiveil_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
-+				     int where, int size, u32 *val)
-+{
-+	struct mobiveil_pcie *pcie = bus->sysdata;
-+	struct root_port *rp = &pcie->rp;
-+
-+	if (bus->number > rp->root_bus_nr && rp->ops->read_other_conf)
-+		return rp->ops->read_other_conf(bus, devfn, where, size, val);
-+
-+	return pci_generic_config_read(bus, devfn, where, size, val);
-+}
- static struct pci_ops mobiveil_pcie_ops = {
- 	.map_bus = mobiveil_pcie_map_bus,
--	.read = pci_generic_config_read,
-+	.read = mobiveil_pcie_config_read,
- 	.write = pci_generic_config_write,
- };
- 
-@@ -300,6 +311,10 @@ int mobiveil_host_init(struct mobiveil_p
- 	value |= (PCI_CLASS_BRIDGE_PCI << 16);
- 	csr_writel(pcie, value, PAB_INTP_AXI_PIO_CLASS);
- 
-+	/* Platform specific host init */
-+	if (pcie->ops->host_init)
-+		return pcie->ops->host_init(pcie);
-+
- 	return 0;
- }
- 
---- a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
-+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
-@@ -146,6 +146,8 @@ struct mobiveil_msi {			/* MSI informati
- 
- struct mobiveil_rp_ops {
- 	int (*interrupt_init)(struct mobiveil_pcie *pcie);
-+	int (*read_other_conf)(struct pci_bus *bus, unsigned int devfn,
-+			       int where, int size, u32 *val);
- };
- 
- struct root_port {
-@@ -161,6 +163,7 @@ struct root_port {
- 
- struct mobiveil_pab_ops {
- 	int (*link_up)(struct mobiveil_pcie *pcie);
-+	int (*host_init)(struct mobiveil_pcie *pcie);
- };
- 
- struct mobiveil_pcie {
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0014-PCI-mobiveil-ls_pcie_g4-add-Workaround-for-A-011451.patch b/target/linux/layerscape/patches-5.4/812-pcie-0014-PCI-mobiveil-ls_pcie_g4-add-Workaround-for-A-011451.patch
deleted file mode 100644
index 5486bdd003..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0014-PCI-mobiveil-ls_pcie_g4-add-Workaround-for-A-011451.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 5f1673ff67d5e8acf590fb5a4cc2d0d5d4115927 Mon Sep 17 00:00:00 2001
-From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-Date: Tue, 6 Nov 2018 10:14:57 +0800
-Subject: [PATCH] PCI: mobiveil: ls_pcie_g4: add Workaround for A-011451
-
-When LX2 PCIe controller is sending multiple split completions and
-ACK latency expires indicating that ACK should be send at priority.
-But because of large number of split completions and FC update DLLP,
-the controller does not give priority to ACK transmission. This
-results into ACK latency timer timeout error at the link partner and
-the pending TLPs are replayed by the link partner again.
-
-Workaround:
-1. Reduce the ACK latency timeout value to a very small value.
-2. Restrict the number of completions from the LX2 PCIe controller
-   to 1, by changing the Max Read Request Size (MRRS) of link partner
-   to the same value as Max Packet size (MPS).
-
-This patch implemented part 1, the part 2 can be set by kernel parameter
-'pci=pcie_bus_perf'
-
-This ERRATA is only for LX2160A Rev1.0, and it will be fixed
-in Rev2.0.
-
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
----
- drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c | 15 +++++++++++++++
- drivers/pci/controller/mobiveil/pcie-mobiveil.h        |  4 ++++
- 2 files changed, 19 insertions(+)
-
---- a/drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
-+++ b/drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
-@@ -80,12 +80,27 @@ static bool ls_pcie_g4_is_bridge(struct
- 	return header_type == PCI_HEADER_TYPE_BRIDGE;
- }
- 
-+static void workaround_A011451(struct ls_pcie_g4 *pcie)
-+{
-+	struct mobiveil_pcie *mv_pci = &pcie->pci;
-+	u32 val;
-+
-+	/* Set ACK latency timeout */
-+	val = csr_readl(mv_pci, GPEX_ACK_REPLAY_TO);
-+	val &= ~(ACK_LAT_TO_VAL_MASK << ACK_LAT_TO_VAL_SHIFT);
-+	val |= (4 << ACK_LAT_TO_VAL_SHIFT);
-+	csr_writel(mv_pci, val, GPEX_ACK_REPLAY_TO);
-+}
-+
- static int ls_pcie_g4_host_init(struct mobiveil_pcie *pci)
- {
- 	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(pci);
- 
- 	pcie->rev = csr_readb(pci, PCI_REVISION_ID);
- 
-+	if (pcie->rev == REV_1_0)
-+		workaround_A011451(pcie);
-+
- 	return 0;
- }
- 
---- a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
-+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
-@@ -86,6 +86,10 @@
- #define PAB_AXI_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x0bac, win)
- #define PAB_INTP_AXI_PIO_CLASS		0x474
- 
-+#define GPEX_ACK_REPLAY_TO		0x438
-+#define  ACK_LAT_TO_VAL_MASK		0x1fff
-+#define  ACK_LAT_TO_VAL_SHIFT		0
-+
- #define PAB_PEX_AMAP_CTRL(win)		PAB_REG_ADDR(0x4ba0, win)
- #define  AMAP_CTRL_EN_SHIFT		0
- #define  AMAP_CTRL_TYPE_SHIFT		1
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0015-PCI-ls_gen4-WA-for-SERROR.patch b/target/linux/layerscape/patches-5.4/812-pcie-0015-PCI-ls_gen4-WA-for-SERROR.patch
deleted file mode 100644
index 77d837dc92..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0015-PCI-ls_gen4-WA-for-SERROR.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 76b810d5fc0cf60e4c98c135011730f84ebe448d Mon Sep 17 00:00:00 2001
-From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-Date: Tue, 28 May 2019 11:17:35 +0800
-Subject: [PATCH] PCI: ls_gen4: WA for SERROR
-
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
----
- drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
-+++ b/drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
-@@ -242,13 +242,13 @@ static int ls_pcie_g4_read_other_conf(st
- 	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(pci);
- 	int ret;
- 
--	if (pcie->rev == REV_1_0 && where == PCI_VENDOR_ID)
-+	if (pcie->rev == REV_1_0)
- 		ls_pcie_g4_lut_writel(pcie, PCIE_LUT_GCR,
- 				      0 << PCIE_LUT_GCR_RRE);
- 
- 	ret = pci_generic_config_read(bus, devfn, where, size, val);
- 
--	if (pcie->rev == REV_1_0 && where == PCI_VENDOR_ID)
-+	if (pcie->rev == REV_1_0)
- 		ls_pcie_g4_lut_writel(pcie, PCIE_LUT_GCR,
- 				      1 << PCIE_LUT_GCR_RRE);
- 
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0016-PCI-mobiveil-Add-the-EP-driver-support.patch b/target/linux/layerscape/patches-5.4/812-pcie-0016-PCI-mobiveil-Add-the-EP-driver-support.patch
deleted file mode 100644
index 667094355f..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0016-PCI-mobiveil-Add-the-EP-driver-support.patch
+++ /dev/null
@@ -1,889 +0,0 @@
-From 21d86ac5a6c0ede443676cb455e988adcc0e3762 Mon Sep 17 00:00:00 2001
-From: Xiaowei Bao <xiaowei.bao@nxp.com>
-Date: Sat, 5 Jan 2019 16:06:43 +0800
-Subject: [PATCH] PCI: mobiveil: Add the EP driver support
-
-Add the EP driver support for Mobiveil base on endpoint framework.
-
-Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
-[Zhiqiang: Correct the Copyright]
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
----
- MAINTAINERS                                        |   1 +
- drivers/pci/controller/mobiveil/Kconfig            |   5 +
- drivers/pci/controller/mobiveil/Makefile           |   1 +
- drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c | 568 +++++++++++++++++++++
- drivers/pci/controller/mobiveil/pcie-mobiveil.c    |  99 +++-
- drivers/pci/controller/mobiveil/pcie-mobiveil.h    |  68 +++
- 6 files changed, 734 insertions(+), 8 deletions(-)
- create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -12501,6 +12501,7 @@ F:	drivers/ntb/hw/mscc/
- PCI DRIVER FOR MOBIVEIL PCIE IP
- M:	Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in>
- M:	Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-+M:	Xiaowei Bao <xiaowei.bao@nxp.com>
- L:	linux-pci@vger.kernel.org
- S:	Supported
- F:	Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
---- a/drivers/pci/controller/mobiveil/Kconfig
-+++ b/drivers/pci/controller/mobiveil/Kconfig
-@@ -11,6 +11,11 @@ config PCIE_MOBIVEIL_HOST
- 	depends on PCI_MSI_IRQ_DOMAIN
-         select PCIE_MOBIVEIL
- 
-+config PCIE_MOBIVEIL_EP
-+	bool
-+	depends on PCI_ENDPOINT
-+	select PCIE_MOBIVEIL
-+
- config PCIE_MOBIVEIL_PLAT
- 	bool "Mobiveil AXI PCIe controller"
- 	depends on ARCH_ZYNQMP || COMPILE_TEST
---- a/drivers/pci/controller/mobiveil/Makefile
-+++ b/drivers/pci/controller/mobiveil/Makefile
-@@ -1,5 +1,6 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
- obj-$(CONFIG_PCIE_MOBIVEIL_HOST) += pcie-mobiveil-host.o
-+obj-$(CONFIG_PCIE_MOBIVEIL_EP) += pcie-mobiveil-ep.o
- obj-$(CONFIG_PCIE_MOBIVEIL_PLAT) += pcie-mobiveil-plat.o
- obj-$(CONFIG_PCIE_LAYERSCAPE_GEN4) += pcie-layerscape-gen4.o
---- /dev/null
-+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c
-@@ -0,0 +1,568 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Mobiveil PCIe Endpoint controller driver
-+ *
-+ * Copyright 2019 NXP
-+ * Author: Xiaowei Bao <xiaowei.bao@nxp.com>
-+ */
-+
-+#include <linux/of.h>
-+#include <linux/pci-epc.h>
-+#include <linux/pci-epf.h>
-+#include <linux/platform_device.h>
-+#include "pcie-mobiveil.h"
-+
-+static void mobiveil_pcie_ep_func_select(struct mobiveil_pcie *pcie, u8 func_no)
-+{
-+	u32 func_num;
-+
-+	/*
-+	 * select to access the config space of func_no by setting func_no
-+	 * to FUNC_SEL_SHIFT bit of PAB_CTRL register.
-+	 */
-+	func_num = csr_readl(pcie, PAB_CTRL);
-+	func_num &= ~(FUNC_SEL_MASK << FUNC_SEL_SHIFT);
-+	func_num |= (func_no & FUNC_SEL_MASK) << FUNC_SEL_SHIFT;
-+	csr_writel(pcie, func_num, PAB_CTRL);
-+}
-+
-+static void mobiveil_pcie_ep_func_deselect(struct mobiveil_pcie *pcie)
-+{
-+	u32 func_num;
-+
-+	/*
-+	 * clear the FUNC_SEL_SHIFT bits when access other registers except
-+	 * config space register.
-+	 */
-+	func_num = csr_readl(pcie, PAB_CTRL);
-+	func_num &= ~(FUNC_SEL_MASK << FUNC_SEL_SHIFT);
-+	csr_writel(pcie, func_num, PAB_CTRL);
-+}
-+
-+static void __mobiveil_pcie_ep_reset_bar(struct mobiveil_pcie *pcie, u8 bar)
-+{
-+	csr_writel(pcie, bar, GPEX_BAR_SELECT);
-+	csr_writel(pcie, 0, GPEX_BAR_SIZE_LDW);
-+	csr_writel(pcie, 0, GPEX_BAR_SIZE_UDW);
-+}
-+
-+void mobiveil_pcie_ep_reset_bar(struct mobiveil_pcie *pcie, u8 bar)
-+{
-+	__mobiveil_pcie_ep_reset_bar(pcie, bar);
-+}
-+
-+static u8 __mobiveil_pcie_ep_find_next_cap(struct mobiveil_pcie *pcie,
-+					   u8 func_no, u8 cap_ptr, u8 cap)
-+{
-+	u8 cap_id, next_cap_ptr;
-+	u16 reg;
-+
-+	if (!cap_ptr)
-+		return 0;
-+
-+	mobiveil_pcie_ep_func_select(pcie, func_no);
-+
-+	reg = csr_readw(pcie, cap_ptr);
-+	cap_id = (reg & 0x00ff);
-+
-+	mobiveil_pcie_ep_func_deselect(pcie);
-+
-+	if (cap_id > PCI_CAP_ID_MAX)
-+		return 0;
-+
-+	if (cap_id == cap)
-+		return cap_ptr;
-+
-+	next_cap_ptr = (reg & 0xff00) >> 8;
-+	return __mobiveil_pcie_ep_find_next_cap(pcie, func_no,
-+						next_cap_ptr, cap);
-+}
-+
-+static u8 mobiveil_pcie_ep_find_capability(struct mobiveil_pcie_ep *ep,
-+					   u8 func_no, u8 cap)
-+{
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+	u8 next_cap_ptr;
-+	u16 reg;
-+
-+	mobiveil_pcie_ep_func_select(pcie, func_no);
-+
-+	reg = csr_readw(pcie, PCI_CAPABILITY_LIST);
-+	next_cap_ptr = (reg & 0x00ff);
-+
-+	mobiveil_pcie_ep_func_deselect(pcie);
-+
-+	return __mobiveil_pcie_ep_find_next_cap(pcie, func_no,
-+						next_cap_ptr, cap);
-+}
-+
-+static int mobiveil_pcie_ep_write_header(struct pci_epc *epc, u8 func_no,
-+					 struct pci_epf_header *hdr)
-+{
-+	struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc);
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+
-+	mobiveil_pcie_ep_func_select(pcie, func_no);
-+
-+	csr_writew(pcie, hdr->vendorid, PCI_VENDOR_ID);
-+	csr_writew(pcie, hdr->deviceid, PCI_DEVICE_ID);
-+	csr_writeb(pcie, hdr->revid, PCI_REVISION_ID);
-+	csr_writeb(pcie, hdr->progif_code, PCI_CLASS_PROG);
-+	csr_writew(pcie, hdr->subclass_code | hdr->baseclass_code << 8,
-+		   PCI_CLASS_DEVICE);
-+	csr_writeb(pcie, hdr->cache_line_size, PCI_CACHE_LINE_SIZE);
-+	csr_writew(pcie, hdr->subsys_vendor_id, PCI_SUBSYSTEM_VENDOR_ID);
-+	csr_writew(pcie, hdr->subsys_id, PCI_SUBSYSTEM_ID);
-+	csr_writeb(pcie, hdr->interrupt_pin, PCI_INTERRUPT_PIN);
-+
-+	mobiveil_pcie_ep_func_deselect(pcie);
-+
-+	return 0;
-+}
-+
-+static void mobiveil_pcie_ep_inbound_win(struct mobiveil_pcie_ep *ep,
-+					 u8 func_no, enum pci_barno bar,
-+					 dma_addr_t cpu_addr)
-+{
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+
-+	program_ib_windows_ep(pcie, func_no, bar, cpu_addr);
-+}
-+
-+static int mobiveil_pcie_ep_outbound_win(struct mobiveil_pcie_ep *ep,
-+					 phys_addr_t phys_addr,
-+					 u64 pci_addr, u8 func_no,
-+					 size_t size)
-+{
-+	u32 free_win;
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+
-+	free_win = find_first_zero_bit(ep->apio_wins_map, ep->apio_wins);
-+	if (free_win >= ep->apio_wins) {
-+		dev_err(&pcie->pdev->dev, "No free outbound window\n");
-+		return -EINVAL;
-+	}
-+
-+	program_ob_windows_ep(pcie, func_no, free_win, phys_addr,
-+			      pci_addr, MEM_WINDOW_TYPE, size);
-+
-+	set_bit(free_win, ep->apio_wins_map);
-+	ep->apio_addr[free_win] = phys_addr;
-+
-+	return 0;
-+}
-+
-+static void mobiveil_pcie_ep_clear_bar(struct pci_epc *epc, u8 func_no,
-+				       struct pci_epf_bar *epf_bar)
-+{
-+	struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc);
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+	enum pci_barno bar = epf_bar->barno;
-+
-+	if (bar < ep->bar_num) {
-+		__mobiveil_pcie_ep_reset_bar(pcie, func_no * ep->bar_num + bar);
-+
-+		mobiveil_pcie_disable_ib_win_ep(pcie, func_no, bar);
-+	}
-+}
-+
-+static int mobiveil_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no,
-+				    struct pci_epf_bar *epf_bar)
-+{
-+	struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc);
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+	enum pci_barno bar = epf_bar->barno;
-+	size_t size = epf_bar->size;
-+
-+	if (bar < ep->bar_num) {
-+		mobiveil_pcie_ep_inbound_win(ep, func_no, bar,
-+					     epf_bar->phys_addr);
-+
-+		csr_writel(pcie, func_no * ep->bar_num + bar,
-+			   GPEX_BAR_SELECT);
-+		csr_writel(pcie, lower_32_bits(~(size - 1)),
-+			   GPEX_BAR_SIZE_LDW);
-+		csr_writel(pcie, upper_32_bits(~(size - 1)),
-+			   GPEX_BAR_SIZE_UDW);
-+	}
-+
-+	return 0;
-+}
-+
-+static int mobiveil_pcie_find_index(struct mobiveil_pcie_ep *ep,
-+				    phys_addr_t addr,
-+				    u32 *atu_index)
-+{
-+	u32 index;
-+
-+	for (index = 0; index < ep->apio_wins; index++) {
-+		if (ep->apio_addr[index] != addr)
-+			continue;
-+		*atu_index = index;
-+		return 0;
-+	}
-+
-+	return -EINVAL;
-+}
-+
-+static void mobiveil_pcie_ep_unmap_addr(struct pci_epc *epc, u8 func_no,
-+					phys_addr_t addr)
-+{
-+	int ret;
-+	u32 atu_index;
-+	struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc);
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+
-+	ret = mobiveil_pcie_find_index(ep, addr, &atu_index);
-+	if (ret < 0)
-+		return;
-+
-+	mobiveil_pcie_disable_ob_win(pcie, atu_index);
-+	clear_bit(atu_index, ep->apio_wins_map);
-+}
-+
-+static int mobiveil_pcie_ep_map_addr(struct pci_epc *epc, u8 func_no,
-+				     phys_addr_t addr,
-+				     u64 pci_addr, size_t size)
-+{
-+	int ret;
-+	struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc);
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+
-+	ret = mobiveil_pcie_ep_outbound_win(ep, addr, pci_addr, func_no, size);
-+	if (ret) {
-+		dev_err(&pcie->pdev->dev, "Failed to enable address\n");
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int mobiveil_pcie_ep_get_msi(struct pci_epc *epc, u8 func_no)
-+{
-+	struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc);
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+	u32 val, reg;
-+	u8 msi_cap;
-+
-+	msi_cap = mobiveil_pcie_ep_find_capability(ep, func_no,
-+						   PCI_CAP_ID_MSI);
-+	if (!msi_cap)
-+		return -EINVAL;
-+
-+	mobiveil_pcie_ep_func_select(pcie, func_no);
-+
-+	reg = msi_cap + PCI_MSI_FLAGS;
-+	val = csr_readw(pcie, reg);
-+
-+	mobiveil_pcie_ep_func_deselect(pcie);
-+
-+	if (!(val & PCI_MSI_FLAGS_ENABLE))
-+		return -EINVAL;
-+
-+	val = (val & PCI_MSI_FLAGS_QSIZE) >> 4;
-+
-+	return val;
-+}
-+
-+static int mobiveil_pcie_ep_set_msi(struct pci_epc *epc,
-+				    u8 func_no, u8 interrupts)
-+{
-+	struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc);
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+	u32 val, reg;
-+	u8 msi_cap;
-+
-+	msi_cap = mobiveil_pcie_ep_find_capability(ep, func_no,
-+						   PCI_CAP_ID_MSI);
-+	if (!msi_cap)
-+		return -EINVAL;
-+
-+	mobiveil_pcie_ep_func_select(pcie, func_no);
-+
-+	reg = msi_cap + PCI_MSI_FLAGS;
-+	val = csr_readw(pcie, reg);
-+	val &= ~PCI_MSI_FLAGS_QMASK;
-+	val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK;
-+	csr_writew(pcie, val, reg);
-+
-+	mobiveil_pcie_ep_func_deselect(pcie);
-+
-+	return 0;
-+}
-+
-+static int mobiveil_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no)
-+{
-+	struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc);
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+	u32 val, reg;
-+	u8 msix_cap;
-+
-+	msix_cap = mobiveil_pcie_ep_find_capability(ep, func_no,
-+						    PCI_CAP_ID_MSIX);
-+	if (!msix_cap)
-+		return -EINVAL;
-+
-+	mobiveil_pcie_ep_func_select(pcie, func_no);
-+
-+	reg = msix_cap + PCI_MSIX_FLAGS;
-+	val = csr_readw(pcie, reg);
-+
-+	mobiveil_pcie_ep_func_deselect(pcie);
-+
-+	if (!(val & PCI_MSIX_FLAGS_ENABLE))
-+		return -EINVAL;
-+
-+	val &= PCI_MSIX_FLAGS_QSIZE;
-+
-+	return val;
-+}
-+
-+static int mobiveil_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no,
-+				     u16 interrupts)
-+{
-+	struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc);
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+	u32 val, reg;
-+	u8 msix_cap;
-+
-+	msix_cap = mobiveil_pcie_ep_find_capability(ep, func_no,
-+						    PCI_CAP_ID_MSIX);
-+	if (!msix_cap)
-+		return -EINVAL;
-+
-+	mobiveil_pcie_ep_func_select(pcie, func_no);
-+
-+	reg = msix_cap + PCI_MSIX_FLAGS;
-+	val = csr_readw(pcie, reg);
-+	val &= ~PCI_MSIX_FLAGS_QSIZE;
-+	val |= interrupts;
-+	csr_writew(pcie, val, reg);
-+
-+	mobiveil_pcie_ep_func_deselect(pcie);
-+
-+	return 0;
-+}
-+
-+static int mobiveil_pcie_ep_raise_irq(struct pci_epc *epc, u8 func_no,
-+				      enum pci_epc_irq_type type,
-+				      u16 interrupt_num)
-+{
-+	struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc);
-+
-+	if (!ep->ops->raise_irq)
-+		return -EINVAL;
-+
-+	return ep->ops->raise_irq(ep, func_no, type, interrupt_num);
-+}
-+
-+static const struct pci_epc_features*
-+mobiveil_pcie_ep_get_features(struct pci_epc *epc, u8 func_no)
-+{
-+	struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc);
-+
-+	if (!ep->ops->get_features)
-+		return NULL;
-+
-+	return ep->ops->get_features(ep);
-+}
-+
-+static const struct pci_epc_ops epc_ops = {
-+	.write_header		= mobiveil_pcie_ep_write_header,
-+	.set_bar		= mobiveil_pcie_ep_set_bar,
-+	.clear_bar		= mobiveil_pcie_ep_clear_bar,
-+	.map_addr		= mobiveil_pcie_ep_map_addr,
-+	.unmap_addr		= mobiveil_pcie_ep_unmap_addr,
-+	.set_msi		= mobiveil_pcie_ep_set_msi,
-+	.get_msi		= mobiveil_pcie_ep_get_msi,
-+	.set_msix		= mobiveil_pcie_ep_set_msix,
-+	.get_msix		= mobiveil_pcie_ep_get_msix,
-+	.raise_irq		= mobiveil_pcie_ep_raise_irq,
-+	.get_features		= mobiveil_pcie_ep_get_features,
-+};
-+
-+int mobiveil_pcie_ep_raise_legacy_irq(struct mobiveil_pcie_ep *ep, u8 func_no)
-+{
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+
-+	dev_err(&pcie->pdev->dev, "EP cannot trigger legacy IRQs\n");
-+
-+	return -EINVAL;
-+}
-+
-+int mobiveil_pcie_ep_raise_msi_irq(struct mobiveil_pcie_ep *ep, u8 func_no,
-+				   u8 interrupt_num)
-+{
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+	struct pci_epc *epc = ep->epc;
-+	u16 msg_ctrl, msg_data;
-+	u32 msg_addr_lower, msg_addr_upper, reg;
-+	u64 msg_addr;
-+	bool has_upper;
-+	int ret;
-+	u8 msi_cap;
-+
-+	msi_cap = mobiveil_pcie_ep_find_capability(ep, func_no,
-+						   PCI_CAP_ID_MSI);
-+	if (!msi_cap)
-+		return -EINVAL;
-+
-+	mobiveil_pcie_ep_func_select(pcie, func_no);
-+
-+	reg = msi_cap + PCI_MSI_FLAGS;
-+	msg_ctrl = csr_readw(pcie, reg);
-+	has_upper = !!(msg_ctrl & PCI_MSI_FLAGS_64BIT);
-+	reg = msi_cap + PCI_MSI_ADDRESS_LO;
-+	msg_addr_lower = csr_readl(pcie, reg);
-+	if (has_upper) {
-+		reg = msi_cap + PCI_MSI_ADDRESS_HI;
-+		msg_addr_upper = csr_readl(pcie, reg);
-+		reg = msi_cap + PCI_MSI_DATA_64;
-+		msg_data = csr_readw(pcie, reg);
-+	} else {
-+		msg_addr_upper = 0;
-+		reg = msi_cap + PCI_MSI_DATA_32;
-+		msg_data = csr_readw(pcie, reg);
-+	}
-+	msg_addr = ((u64) msg_addr_upper) << 32 | msg_addr_lower;
-+
-+	mobiveil_pcie_ep_func_deselect(pcie);
-+
-+	ret = mobiveil_pcie_ep_map_addr(epc, func_no, ep->msi_mem_phys,
-+					msg_addr, epc->mem->page_size);
-+	if (ret)
-+		return ret;
-+
-+	writel(msg_data | (interrupt_num - 1), ep->msi_mem);
-+
-+	mobiveil_pcie_ep_unmap_addr(epc, func_no, ep->msi_mem_phys);
-+
-+	return 0;
-+}
-+
-+int mobiveil_pcie_ep_raise_msix_irq(struct mobiveil_pcie_ep *ep, u8 func_no,
-+				    u16 interrupt_num)
-+{
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+	struct pci_epc *epc = ep->epc;
-+	u32 msg_addr_upper, msg_addr_lower;
-+	u32 msg_data;
-+	u64 msg_addr;
-+	u8 msix_cap;
-+	int ret;
-+
-+	msix_cap = mobiveil_pcie_ep_find_capability(ep, func_no,
-+						   PCI_CAP_ID_MSIX);
-+	if (!msix_cap)
-+		return -EINVAL;
-+
-+	mobiveil_pcie_ep_func_deselect(pcie);
-+
-+	msg_addr_lower = csr_readl(pcie, PAB_MSIX_TABLE_PBA_ACCESS +
-+				   PCI_MSIX_ENTRY_LOWER_ADDR +
-+				   (interrupt_num - 1) * PCI_MSIX_ENTRY_SIZE);
-+	msg_addr_upper = csr_readl(pcie, PAB_MSIX_TABLE_PBA_ACCESS +
-+				   PCI_MSIX_ENTRY_UPPER_ADDR +
-+				   (interrupt_num - 1) * PCI_MSIX_ENTRY_SIZE);
-+	msg_addr = ((u64) msg_addr_upper) << 32 | msg_addr_lower;
-+	msg_data = csr_readl(pcie, PAB_MSIX_TABLE_PBA_ACCESS +
-+			     PCI_MSIX_ENTRY_DATA +
-+			     (interrupt_num - 1) * PCI_MSIX_ENTRY_SIZE);
-+
-+	ret = mobiveil_pcie_ep_map_addr(epc, func_no, ep->msi_mem_phys,
-+					msg_addr, epc->mem->page_size);
-+	if (ret)
-+		return ret;
-+
-+	writel(msg_data, ep->msi_mem);
-+
-+	mobiveil_pcie_ep_unmap_addr(epc, func_no, ep->msi_mem_phys);
-+
-+	return 0;
-+}
-+
-+void mobiveil_pcie_ep_exit(struct mobiveil_pcie_ep *ep)
-+{
-+	struct pci_epc *epc = ep->epc;
-+
-+	pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem,
-+			      epc->mem->page_size);
-+
-+	pci_epc_mem_exit(epc);
-+}
-+
-+int mobiveil_pcie_ep_init(struct mobiveil_pcie_ep *ep)
-+{
-+	int ret;
-+	void *addr;
-+	struct pci_epc *epc;
-+	struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep);
-+	struct device *dev = &pcie->pdev->dev;
-+	struct device_node *np = dev->of_node;
-+
-+	if (!pcie->csr_axi_slave_base) {
-+		dev_err(dev, "csr_base is not populated\n");
-+		return -EINVAL;
-+	}
-+
-+	ret = of_property_read_u32(np, "apio-wins", &ep->apio_wins);
-+	if (ret < 0) {
-+		dev_err(dev, "Unable to read apio-wins property\n");
-+		return ret;
-+	}
-+
-+	if (ep->apio_wins > MAX_IATU_OUT) {
-+		dev_err(dev, "Invalid apio-wins\n");
-+		return -EINVAL;
-+	}
-+	ep->apio_wins_map = devm_kcalloc(dev,
-+					 BITS_TO_LONGS(ep->apio_wins),
-+					 sizeof(long),
-+					 GFP_KERNEL);
-+	if (!ep->apio_wins_map)
-+		return -ENOMEM;
-+
-+	addr = devm_kcalloc(dev, ep->apio_wins, sizeof(phys_addr_t),
-+			    GFP_KERNEL);
-+	if (!addr)
-+		return -ENOMEM;
-+
-+	ep->apio_addr = addr;
-+
-+	mobiveil_pcie_enable_bridge_pio(pcie);
-+	mobiveil_pcie_enable_engine_apio(pcie);
-+	mobiveil_pcie_enable_engine_ppio(pcie);
-+	mobiveil_pcie_enable_msi_ep(pcie);
-+
-+	epc = devm_pci_epc_create(dev, &epc_ops);
-+	if (IS_ERR(epc)) {
-+		dev_err(dev, "Failed to create epc device\n");
-+		return PTR_ERR(epc);
-+	}
-+
-+	ep->epc = epc;
-+	epc_set_drvdata(epc, ep);
-+
-+	ret = of_property_read_u8(np, "max-functions", &epc->max_functions);
-+	if (ret < 0)
-+		epc->max_functions = 1;
-+
-+	if (ep->ops->ep_init)
-+		ep->ops->ep_init(ep);
-+
-+	ret = __pci_epc_mem_init(epc, ep->phys_base, ep->addr_size,
-+				 ep->page_size);
-+	if (ret < 0) {
-+		dev_err(dev, "Failed to initialize address space\n");
-+		return ret;
-+	}
-+
-+	ep->msi_mem = pci_epc_mem_alloc_addr(epc, &ep->msi_mem_phys,
-+					     epc->mem->page_size);
-+	if (!ep->msi_mem) {
-+		dev_err(dev, "Failed to reserve memory for MSI/MSI-X\n");
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
---- a/drivers/pci/controller/mobiveil/pcie-mobiveil.c
-+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.c
-@@ -168,18 +168,12 @@ void program_ib_windows(struct mobiveil_
- /*
-  * routine to program the outbound windows
-  */
--void program_ob_windows(struct mobiveil_pcie *pcie, int win_num, u64 cpu_addr,
--			u64 pci_addr, u32 type, u64 size)
-+void __program_ob_windows(struct mobiveil_pcie *pcie, u8 func_no, int win_num,
-+			  u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
- {
- 	u32 value;
- 	u64 size64 = ~(size - 1);
- 
--	if (win_num >= pcie->apio_wins) {
--		dev_err(&pcie->pdev->dev,
--			"ERROR: max outbound windows reached !\n");
--		return;
--	}
--
- 	/*
- 	 * program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit
- 	 * to 4 KB in PAB_AXI_AMAP_CTRL register
-@@ -192,6 +186,7 @@ void program_ob_windows(struct mobiveil_
- 
- 	csr_writel(pcie, upper_32_bits(size64), PAB_EXT_AXI_AMAP_SIZE(win_num));
- 
-+	csr_writel(pcie, func_no, PAB_AXI_AMAP_PCI_HDR_PARAM(win_num));
- 	/*
- 	 * program AXI window base with appropriate value in
- 	 * PAB_AXI_AMAP_AXI_WIN0 register
-@@ -205,10 +200,98 @@ void program_ob_windows(struct mobiveil_
- 		   PAB_AXI_AMAP_PEX_WIN_L(win_num));
- 	csr_writel(pcie, upper_32_bits(pci_addr),
- 		   PAB_AXI_AMAP_PEX_WIN_H(win_num));
-+}
-+
-+void program_ob_windows(struct mobiveil_pcie *pcie, int win_num, u64 cpu_addr,
-+			u64 pci_addr, u32 type, u64 size)
-+{
-+	if (win_num >= pcie->apio_wins) {
-+		dev_err(&pcie->pdev->dev,
-+			"ERROR: max outbound windows reached !\n");
-+		return;
-+	}
-+
-+	__program_ob_windows(pcie, 0, win_num, cpu_addr,
-+			     pci_addr, type, size);
- 
- 	pcie->ob_wins_configured++;
- }
- 
-+void program_ob_windows_ep(struct mobiveil_pcie *pcie, u8 func_no, int win_num,
-+			   u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
-+{
-+	if (size & (size - 1))
-+		size = 1 << (1 + ilog2(size));
-+
-+	__program_ob_windows(pcie, func_no, win_num, cpu_addr,
-+			     pci_addr, type, size);
-+}
-+
-+void program_ib_windows_ep(struct mobiveil_pcie *pcie, u8 func_no,
-+			   int bar, u64 phys)
-+{
-+	csr_writel(pcie, upper_32_bits(phys),
-+		   PAB_EXT_PEX_BAR_AMAP(func_no, bar));
-+	csr_writel(pcie, lower_32_bits(phys) | PEX_BAR_AMAP_EN,
-+		   PAB_PEX_BAR_AMAP(func_no, bar));
-+}
-+
-+void mobiveil_pcie_disable_ib_win_ep(struct mobiveil_pcie *pcie,
-+				     u8 func_no, u8 bar)
-+{
-+	u32 val;
-+
-+	val = csr_readl(pcie, PAB_PEX_BAR_AMAP(func_no, bar));
-+	val &= ~(1 << 0);
-+	csr_writel(pcie, val, PAB_PEX_BAR_AMAP(func_no, bar));
-+}
-+
-+void mobiveil_pcie_disable_ob_win(struct mobiveil_pcie *pcie, int win_num)
-+{
-+	u32 val;
-+
-+	val = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num));
-+	val &= ~(1 << WIN_ENABLE_SHIFT);
-+	csr_writel(pcie, val, PAB_AXI_AMAP_CTRL(win_num));
-+}
-+
-+void mobiveil_pcie_enable_bridge_pio(struct mobiveil_pcie *pcie)
-+{
-+	u32 val;
-+
-+	val = csr_readl(pcie, PAB_CTRL);
-+	val |= 1 << AMBA_PIO_ENABLE_SHIFT;
-+	val |= 1 << PEX_PIO_ENABLE_SHIFT;
-+	csr_writel(pcie, val, PAB_CTRL);
-+}
-+
-+void mobiveil_pcie_enable_engine_apio(struct mobiveil_pcie *pcie)
-+{
-+	u32 val;
-+
-+	val = csr_readl(pcie, PAB_AXI_PIO_CTRL);
-+	val |= APIO_EN_MASK;
-+	csr_writel(pcie, val, PAB_AXI_PIO_CTRL);
-+}
-+
-+void mobiveil_pcie_enable_engine_ppio(struct mobiveil_pcie *pcie)
-+{
-+	u32 val;
-+
-+	val = csr_readl(pcie, PAB_PEX_PIO_CTRL);
-+	val |= 1 << PIO_ENABLE_SHIFT;
-+	csr_writel(pcie, val, PAB_PEX_PIO_CTRL);
-+}
-+
-+void mobiveil_pcie_enable_msi_ep(struct mobiveil_pcie *pcie)
-+{
-+	u32 val;
-+
-+	val =  csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
-+	val |= PAB_INTP_PAMR;
-+	csr_writel(pcie, val, PAB_INTP_AMBA_MISC_ENB);
-+}
-+
- int mobiveil_bringup_link(struct mobiveil_pcie *pcie)
- {
- 	int retries;
---- a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
-+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
-@@ -15,8 +15,12 @@
- #include <linux/pci.h>
- #include <linux/irq.h>
- #include <linux/msi.h>
-+#include <linux/pci-epc.h>
-+#include <linux/pci-epf.h>
-+
- #include "../../pci.h"
- 
-+#define MAX_IATU_OUT			256
- /* register offsets and bit positions */
- 
- /*
-@@ -42,6 +46,9 @@
- #define  PAGE_SEL_MASK			0x3f
- #define  PAGE_LO_MASK			0x3ff
- #define  PAGE_SEL_OFFSET_SHIFT		10
-+#define  FUNC_SEL_SHIFT			19
-+#define  FUNC_SEL_MASK			0x1ff
-+#define  MSI_SW_CTRL_EN			BIT(29)
- 
- #define PAB_ACTIVITY_STAT		0x81c
- 
-@@ -52,6 +59,7 @@
- #define  PIO_ENABLE_SHIFT		0
- 
- #define PAB_INTP_AMBA_MISC_ENB		0x0b0c
-+#define  PAB_INTP_PAMR			BIT(0)
- #define PAB_INTP_AMBA_MISC_STAT		0x0b1c
- #define  PAB_INTP_RESET			BIT(1)
- #define  PAB_INTP_MSI			BIT(3)
-@@ -72,6 +80,8 @@
- #define  WIN_TYPE_MASK			0x3
- #define  WIN_SIZE_MASK			0xfffffc00
- 
-+#define PAB_AXI_AMAP_PCI_HDR_PARAM(win)	PAB_EXT_REG_ADDR(0x5ba0, win)
-+
- #define PAB_EXT_AXI_AMAP_SIZE(win)	PAB_EXT_REG_ADDR(0xbaf0, win)
- 
- #define PAB_EXT_AXI_AMAP_AXI_WIN(win)	PAB_EXT_REG_ADDR(0x80a0, win)
-@@ -101,6 +111,18 @@
- #define PAB_PEX_AMAP_PEX_WIN_L(win)	PAB_REG_ADDR(0x4ba8, win)
- #define PAB_PEX_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x4bac, win)
- 
-+/* PPIO WINs EP mode */
-+#define PAB_PEX_BAR_AMAP(func, bar)	(0x1ba0 + 0x20 * func + 4 * bar)
-+#define PAB_EXT_PEX_BAR_AMAP(func, bar)	(0x84a0 + 0x20 * func + 4 * bar)
-+#define PEX_BAR_AMAP_EN			BIT(0)
-+
-+#define PAB_MSIX_TABLE_PBA_ACCESS	0xD000
-+
-+#define GPEX_BAR_ENABLE			0x4D4
-+#define GPEX_BAR_SIZE_LDW		0x4D8
-+#define GPEX_BAR_SIZE_UDW		0x4DC
-+#define GPEX_BAR_SELECT			0x4E0
-+
- /* starting offset of INTX bits in status register */
- #define PAB_INTX_START			5
- 
-@@ -138,6 +160,7 @@
- 	((off >> PAGE_SEL_OFFSET_SHIFT) & PAGE_SEL_MASK)
- 
- struct mobiveil_pcie;
-+struct mobiveil_pcie_ep;
- 
- struct mobiveil_msi {			/* MSI information */
- 	struct mutex lock;		/* protect bitmap variable */
-@@ -170,6 +193,28 @@ struct mobiveil_pab_ops {
- 	int (*host_init)(struct mobiveil_pcie *pcie);
- };
- 
-+struct mobiveil_pcie_ep_ops {
-+	void (*ep_init)(struct mobiveil_pcie_ep *ep);
-+	int (*raise_irq)(struct mobiveil_pcie_ep *ep, u8 func_no,
-+			 enum pci_epc_irq_type type, u16 interrupt_num);
-+	const struct pci_epc_features* (*get_features)
-+				       (struct mobiveil_pcie_ep *ep);
-+};
-+
-+struct mobiveil_pcie_ep {
-+	struct pci_epc *epc;
-+	const struct mobiveil_pcie_ep_ops *ops;
-+	phys_addr_t phys_base;
-+	size_t addr_size;
-+	size_t page_size;
-+	phys_addr_t *apio_addr;
-+	unsigned long *apio_wins_map;
-+	u32 apio_wins;
-+	void __iomem *msi_mem;
-+	phys_addr_t msi_mem_phys;
-+	u8 bar_num;
-+};
-+
- struct mobiveil_pcie {
- 	struct platform_device *pdev;
- 	struct list_head *resources;
-@@ -183,8 +228,12 @@ struct mobiveil_pcie {
- 	const struct mobiveil_pab_ops *ops;
- 	struct root_port rp;
- 	struct pci_host_bridge *bridge;
-+	struct mobiveil_pcie_ep ep;
- };
- 
-+#define to_mobiveil_pcie_from_ep(endpoint)   \
-+			    container_of((endpoint), struct mobiveil_pcie, ep)
-+
- int mobiveil_pcie_host_probe(struct mobiveil_pcie *pcie);
- int mobiveil_host_init(struct mobiveil_pcie *pcie, bool reinit);
- bool mobiveil_pcie_link_up(struct mobiveil_pcie *pcie);
-@@ -226,4 +275,23 @@ static inline void csr_writeb(struct mob
- 	csr_write(pcie, val, off, 0x1);
- }
- 
-+void program_ib_windows_ep(struct mobiveil_pcie *pcie, u8 func_no,
-+			   int bar, u64 phys);
-+void program_ob_windows_ep(struct mobiveil_pcie *pcie, u8 func_num, int win_num,
-+			   u64 cpu_addr, u64 pci_addr, u32 type, u64 size);
-+void mobiveil_pcie_disable_ib_win_ep(struct mobiveil_pcie *pci,
-+				     u8 func_no, u8 bar);
-+void mobiveil_pcie_disable_ob_win(struct mobiveil_pcie *pcie, int win_num);
-+int mobiveil_pcie_ep_init(struct mobiveil_pcie_ep *ep);
-+int mobiveil_pcie_ep_raise_legacy_irq(struct mobiveil_pcie_ep *ep, u8 func_no);
-+int mobiveil_pcie_ep_raise_msi_irq(struct mobiveil_pcie_ep *ep, u8 func_no,
-+				   u8 interrupt_num);
-+int mobiveil_pcie_ep_raise_msix_irq(struct mobiveil_pcie_ep *ep, u8 func_no,
-+				    u16 interrupt_num);
-+void mobiveil_pcie_ep_reset_bar(struct mobiveil_pcie *pci, u8 bar);
-+u8 mobiveil_pcie_ep_get_bar_num(struct mobiveil_pcie_ep *ep, u8 func_no);
-+void mobiveil_pcie_enable_bridge_pio(struct mobiveil_pcie *pci);
-+void mobiveil_pcie_enable_engine_apio(struct mobiveil_pcie *pci);
-+void mobiveil_pcie_enable_engine_ppio(struct mobiveil_pcie *pci);
-+void mobiveil_pcie_enable_msi_ep(struct mobiveil_pcie *pci);
- #endif /* _PCIE_MOBIVEIL_H */
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0017-PCI-mobiveil-Add-PCIe-Gen4-EP-driver-for-NXP-Layersc.patch b/target/linux/layerscape/patches-5.4/812-pcie-0017-PCI-mobiveil-Add-PCIe-Gen4-EP-driver-for-NXP-Layersc.patch
deleted file mode 100644
index 16f9bc31b9..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0017-PCI-mobiveil-Add-PCIe-Gen4-EP-driver-for-NXP-Layersc.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-From 9e1faafe9d650a06e212ad5a3b8ed0e7eb7f0aa2 Mon Sep 17 00:00:00 2001
-From: Xiaowei Bao <xiaowei.bao@nxp.com>
-Date: Sat, 5 Jan 2019 16:30:42 +0800
-Subject: [PATCH] PCI: mobiveil: Add PCIe Gen4 EP driver for NXP Layerscape
- SoCs
-
-This PCIe controller is based on the Mobiveil GPEX IP, it work in EP
-mode if select this config opteration.
-
-Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
-[Zhiqiang: Correct the Copyright]
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-[drop maintainer change]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/pci/controller/mobiveil/Kconfig            |  17 ++-
- drivers/pci/controller/mobiveil/Makefile           |   1 +
- .../controller/mobiveil/pcie-layerscape-gen4-ep.c  | 156 +++++++++++++++++++++
- 3 files changed, 171 insertions(+), 3 deletions(-)
- create mode 100644 drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
-
---- a/drivers/pci/controller/mobiveil/Kconfig
-+++ b/drivers/pci/controller/mobiveil/Kconfig
-@@ -27,13 +27,24 @@ config PCIE_MOBIVEIL_PLAT
- 	  for address translation and it is a PCIe Gen4 IP.
- 
- config PCIE_LAYERSCAPE_GEN4
--	bool "Freescale Layerscape PCIe Gen4 controller"
-+	bool "Freescale Layerscpe PCIe Gen4 controller in RC mode"
- 	depends on PCI
- 	depends on OF && (ARM64 || ARCH_LAYERSCAPE)
- 	depends on PCI_MSI_IRQ_DOMAIN
- 	select PCIE_MOBIVEIL_HOST
- 	help
- 	  Say Y here if you want PCIe Gen4 controller support on
--	  Layerscape SoCs. The PCIe controller can work in RC or
--	  EP mode according to RCW[HOST_AGT_PEX] setting.
-+	  Layerscape SoCs. And the PCIe controller work in RC mode
-+	  by setting the RCW[HOST_AGT_PEX] to 0.
-+
-+config PCIE_LAYERSCAPE_GEN4_EP
-+	bool "Freescale Layerscpe PCIe Gen4 controller in EP mode"
-+	depends on PCI
-+	depends on OF && (ARM64 || ARCH_LAYERSCAPE)
-+	depends on PCI_ENDPOINT
-+	select PCIE_MOBIVEIL_EP
-+	help
-+	  Say Y here if you want PCIe Gen4 controller support on
-+	  Layerscape SoCs. And the PCIe controller work in EP mode
-+	  by setting the RCW[HOST_AGT_PEX] to 1.
- endmenu
---- a/drivers/pci/controller/mobiveil/Makefile
-+++ b/drivers/pci/controller/mobiveil/Makefile
-@@ -4,3 +4,4 @@ obj-$(CONFIG_PCIE_MOBIVEIL_HOST) += pcie
- obj-$(CONFIG_PCIE_MOBIVEIL_EP) += pcie-mobiveil-ep.o
- obj-$(CONFIG_PCIE_MOBIVEIL_PLAT) += pcie-mobiveil-plat.o
- obj-$(CONFIG_PCIE_LAYERSCAPE_GEN4) += pcie-layerscape-gen4.o
-+obj-$(CONFIG_PCIE_LAYERSCAPE_GEN4_EP) += pcie-layerscape-gen4-ep.o
---- /dev/null
-+++ b/drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
-@@ -0,0 +1,156 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * PCIe controller EP driver for Freescale Layerscape SoCs
-+ *
-+ * Copyright 2019 NXP
-+ *
-+ * Author: Xiaowei Bao <xiaowei.bao@nxp.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/of_pci.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_address.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/resource.h>
-+
-+#include "pcie-mobiveil.h"
-+
-+#define PCIE_LX2_BAR_NUM	4
-+
-+#define to_ls_pcie_g4_ep(x)	dev_get_drvdata((x)->dev)
-+
-+struct ls_pcie_g4_ep {
-+	struct mobiveil_pcie		*mv_pci;
-+};
-+
-+static const struct of_device_id ls_pcie_g4_ep_of_match[] = {
-+	{ .compatible = "fsl,lx2160a-pcie-ep",},
-+	{ },
-+};
-+
-+static const struct pci_epc_features ls_pcie_g4_epc_features = {
-+	.linkup_notifier = false,
-+	.msi_capable = true,
-+	.msix_capable = true,
-+	.reserved_bar = (1 << BAR_4) | (1 << BAR_5),
-+};
-+
-+static const struct pci_epc_features*
-+ls_pcie_g4_ep_get_features(struct mobiveil_pcie_ep *ep)
-+{
-+	return &ls_pcie_g4_epc_features;
-+}
-+
-+static void ls_pcie_g4_ep_init(struct mobiveil_pcie_ep *ep)
-+{
-+	struct mobiveil_pcie *mv_pci = to_mobiveil_pcie_from_ep(ep);
-+	int win_idx;
-+	u8 bar;
-+
-+	ep->bar_num = PCIE_LX2_BAR_NUM;
-+
-+	for (bar = BAR_0; bar < ep->epc->max_functions * ep->bar_num; bar++)
-+		mobiveil_pcie_ep_reset_bar(mv_pci, bar);
-+
-+	for (win_idx = 0; win_idx < ep->apio_wins; win_idx++)
-+		mobiveil_pcie_disable_ob_win(mv_pci, win_idx);
-+}
-+
-+static int ls_pcie_g4_ep_raise_irq(struct mobiveil_pcie_ep *ep, u8 func_no,
-+				   enum pci_epc_irq_type type,
-+				   u16 interrupt_num)
-+{
-+	struct mobiveil_pcie *mv_pci = to_mobiveil_pcie_from_ep(ep);
-+
-+	switch (type) {
-+	case PCI_EPC_IRQ_LEGACY:
-+		return mobiveil_pcie_ep_raise_legacy_irq(ep, func_no);
-+	case PCI_EPC_IRQ_MSI:
-+		return mobiveil_pcie_ep_raise_msi_irq(ep, func_no,
-+						      interrupt_num);
-+	case PCI_EPC_IRQ_MSIX:
-+		return mobiveil_pcie_ep_raise_msix_irq(ep, func_no,
-+						       interrupt_num);
-+	default:
-+		dev_err(&mv_pci->pdev->dev, "UNKNOWN IRQ type\n");
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct mobiveil_pcie_ep_ops pcie_ep_ops = {
-+	.ep_init = ls_pcie_g4_ep_init,
-+	.raise_irq = ls_pcie_g4_ep_raise_irq,
-+	.get_features = ls_pcie_g4_ep_get_features,
-+};
-+
-+static int __init ls_pcie_gen4_add_pcie_ep(struct ls_pcie_g4_ep *ls_ep,
-+					   struct platform_device *pdev)
-+{
-+	struct mobiveil_pcie *mv_pci = ls_ep->mv_pci;
-+	struct device *dev = &pdev->dev;
-+	struct mobiveil_pcie_ep *ep;
-+	struct resource *res;
-+	int ret;
-+
-+	ep = &mv_pci->ep;
-+	ep->ops = &pcie_ep_ops;
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
-+	if (!res)
-+		return -EINVAL;
-+
-+	ep->phys_base = res->start;
-+	ep->addr_size = resource_size(res);
-+
-+	ret = mobiveil_pcie_ep_init(ep);
-+	if (ret) {
-+		dev_err(dev, "failed to initialize layerscape endpoint\n");
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int __init ls_pcie_g4_ep_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct mobiveil_pcie *mv_pci;
-+	struct ls_pcie_g4_ep *ls_ep;
-+	struct resource *res;
-+	int ret;
-+
-+	ls_ep = devm_kzalloc(dev, sizeof(*ls_ep), GFP_KERNEL);
-+	if (!ls_ep)
-+		return -ENOMEM;
-+
-+	mv_pci = devm_kzalloc(dev, sizeof(*mv_pci), GFP_KERNEL);
-+	if (!mv_pci)
-+		return -ENOMEM;
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
-+	mv_pci->csr_axi_slave_base = devm_pci_remap_cfg_resource(dev, res);
-+	if (IS_ERR(mv_pci->csr_axi_slave_base))
-+		return PTR_ERR(mv_pci->csr_axi_slave_base);
-+
-+	mv_pci->pdev = pdev;
-+	ls_ep->mv_pci = mv_pci;
-+
-+	platform_set_drvdata(pdev, ls_ep);
-+
-+	ret = ls_pcie_gen4_add_pcie_ep(ls_ep, pdev);
-+
-+	return ret;
-+}
-+
-+static struct platform_driver ls_pcie_g4_ep_driver = {
-+	.driver = {
-+		.name = "layerscape-pcie-gen4-ep",
-+		.of_match_table = ls_pcie_g4_ep_of_match,
-+		.suppress_bind_attrs = true,
-+	},
-+};
-+builtin_platform_driver_probe(ls_pcie_g4_ep_driver, ls_pcie_g4_ep_probe);
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0018-PCI-mobiveil-Add-workaround-for-unsupported-request-.patch b/target/linux/layerscape/patches-5.4/812-pcie-0018-PCI-mobiveil-Add-workaround-for-unsupported-request-.patch
deleted file mode 100644
index a08edfa1e4..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0018-PCI-mobiveil-Add-workaround-for-unsupported-request-.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 7cc1ca9e3a87027dbe6598a0c50cb466fc5861e4 Mon Sep 17 00:00:00 2001
-From: Xiaowei Bao <xiaowei.bao@nxp.com>
-Date: Tue, 22 Jan 2019 19:19:30 +0800
-Subject: [PATCH] PCI: mobiveil: Add workaround for unsupported request error
-
-Errata: unsupported request error on inbound posted write
-transaction, PCIe controller reports advisory error instead
-of uncorrectable error message to RC.
-
-Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
----
- drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c | 13 +++++++++++++
- drivers/pci/controller/mobiveil/pcie-mobiveil.h           |  4 ++++
- 2 files changed, 17 insertions(+)
-
---- a/drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
-+++ b/drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
-@@ -49,6 +49,19 @@ static void ls_pcie_g4_ep_init(struct mo
- 	struct mobiveil_pcie *mv_pci = to_mobiveil_pcie_from_ep(ep);
- 	int win_idx;
- 	u8 bar;
-+	u32 val;
-+
-+	/*
-+	 * Errata: unsupported request error on inbound posted write
-+	 * transaction, PCIe controller reports advisory error instead
-+	 * of uncorrectable error message to RC.
-+	 * workaround: set the bit20(unsupported_request_Error_severity) with
-+	 * value 1 in uncorrectable_Error_Severity_Register, make the
-+	 * unsupported request error generate the fatal error.
-+	 */
-+	val =  csr_readl(mv_pci, CFG_UNCORRECTABLE_ERROR_SEVERITY);
-+	val |= 1 << UNSUPPORTED_REQUEST_ERROR_SHIFT;
-+	csr_writel(mv_pci, val, CFG_UNCORRECTABLE_ERROR_SEVERITY);
- 
- 	ep->bar_num = PCIE_LX2_BAR_NUM;
- 
---- a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
-+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
-@@ -123,6 +123,10 @@
- #define GPEX_BAR_SIZE_UDW		0x4DC
- #define GPEX_BAR_SELECT			0x4E0
- 
-+#define CFG_UNCORRECTABLE_ERROR_SEVERITY	0x10c
-+#define UNSUPPORTED_REQUEST_ERROR_SHIFT		20
-+#define CFG_UNCORRECTABLE_ERROR_MASK		0x108
-+
- /* starting offset of INTX bits in status register */
- #define PAB_INTX_START			5
- 
diff --git a/target/linux/layerscape/patches-5.4/812-pcie-0019-misc-pci_endpoint_test-Add-the-layerscape-PCIe-GEN4-.patch b/target/linux/layerscape/patches-5.4/812-pcie-0019-misc-pci_endpoint_test-Add-the-layerscape-PCIe-GEN4-.patch
deleted file mode 100644
index 7eb6bf7b8c..0000000000
--- a/target/linux/layerscape/patches-5.4/812-pcie-0019-misc-pci_endpoint_test-Add-the-layerscape-PCIe-GEN4-.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 19d95534071c0bc330cce57d26391d804b24257c Mon Sep 17 00:00:00 2001
-From: Xiaowei Bao <xiaowei.bao@nxp.com>
-Date: Mon, 18 Feb 2019 16:12:42 +0800
-Subject: [PATCH] misc: pci_endpoint_test: Add the layerscape PCIe GEN4 EP
- device support
-
-Add the layerscape PCIE GEN4 EP device support in pci_endpoint_test driver.
-
-Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
-Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
----
- drivers/misc/pci_endpoint_test.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/misc/pci_endpoint_test.c
-+++ b/drivers/misc/pci_endpoint_test.c
-@@ -65,6 +65,7 @@
- #define PCI_ENDPOINT_TEST_IRQ_NUMBER		0x28
- 
- #define PCI_DEVICE_ID_TI_AM654			0xb00c
-+#define PCI_DEVICE_ID_LX2160A			0x8d80
- 
- #define is_am654_pci_dev(pdev)		\
- 		((pdev)->device == PCI_DEVICE_ID_TI_AM654)
-@@ -799,6 +800,7 @@ static const struct pci_device_id pci_en
- 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x81c0) },
-+	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, PCI_DEVICE_ID_LX2160A) },
- 	{ PCI_DEVICE_DATA(SYNOPSYS, EDDA, NULL) },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM654),
- 	  .driver_data = (kernel_ulong_t)&am654_data
diff --git a/target/linux/layerscape/patches-5.4/813-pm-0001-soc-fsl-add-RCPM-driver.patch b/target/linux/layerscape/patches-5.4/813-pm-0001-soc-fsl-add-RCPM-driver.patch
deleted file mode 100644
index 533534d7c9..0000000000
--- a/target/linux/layerscape/patches-5.4/813-pm-0001-soc-fsl-add-RCPM-driver.patch
+++ /dev/null
@@ -1,201 +0,0 @@
-From 2bd25a6b5b5af59a33c22c2bf2cc4ea3043f33c5 Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Thu, 24 Oct 2019 16:39:30 +0800
-Subject: [PATCH] soc: fsl: add RCPM driver
-
-The NXP's QorIQ processors based on ARM Core have RCPM module
-(Run Control and Power Management), which performs system level
-tasks associated with power management such as wakeup source control.
-
-Note that this driver will not support PowerPC based QorIQ processors,
-and it depends on PM wakeup source framework which provide collect
-wake information.
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/soc/fsl/Kconfig  |   9 +++
- drivers/soc/fsl/Makefile |   1 +
- drivers/soc/fsl/rcpm.c   | 151 +++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 161 insertions(+)
- create mode 100644 drivers/soc/fsl/rcpm.c
-
---- a/drivers/soc/fsl/Kconfig
-+++ b/drivers/soc/fsl/Kconfig
-@@ -52,4 +52,13 @@ config FSL_QIXIS
- 	  Say y here to enable QIXIS system controller api. The qixis driver
- 	  provides FPGA functions to control system.
- 
-+config FSL_RCPM
-+	bool "Freescale RCPM support"
-+	depends on PM_SLEEP && (ARM || ARM64)
-+	help
-+	  The NXP QorIQ Processors based on ARM Core have RCPM module
-+	  (Run Control and Power Management), which performs all device-level
-+	  tasks associated with power management, such as wakeup source control.
-+	  Note that currently this driver will not support PowerPC based
-+	  QorIQ processor.
- endmenu
---- a/drivers/soc/fsl/Makefile
-+++ b/drivers/soc/fsl/Makefile
-@@ -10,3 +10,4 @@ obj-$(CONFIG_FSL_QIXIS) 		+= qixis_ctrl.
- obj-$(CONFIG_FSL_GUTS)			+= guts.o
- obj-$(CONFIG_FSL_MC_DPIO) 		+= dpio/
- obj-$(CONFIG_DPAA2_CONSOLE)		+= dpaa2-console.o
-+obj-$(CONFIG_FSL_RCPM)			+= rcpm.o
---- /dev/null
-+++ b/drivers/soc/fsl/rcpm.c
-@@ -0,0 +1,151 @@
-+// SPDX-License-Identifier: GPL-2.0
-+//
-+// rcpm.c - Freescale QorIQ RCPM driver
-+//
-+// Copyright 2019 NXP
-+//
-+// Author: Ran Wang <ran.wang_1@nxp.com>
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/suspend.h>
-+#include <linux/kernel.h>
-+
-+#define RCPM_WAKEUP_CELL_MAX_SIZE	7
-+
-+struct rcpm {
-+	unsigned int	wakeup_cells;
-+	void __iomem	*ippdexpcr_base;
-+	bool		little_endian;
-+};
-+
-+/**
-+ * rcpm_pm_prepare - performs device-level tasks associated with power
-+ * management, such as programming related to the wakeup source control.
-+ * @dev: Device to handle.
-+ *
-+ */
-+static int rcpm_pm_prepare(struct device *dev)
-+{
-+	int i, ret, idx;
-+	void __iomem *base;
-+	struct wakeup_source	*ws;
-+	struct rcpm		*rcpm;
-+	struct device_node	*np = dev->of_node;
-+	u32 value[RCPM_WAKEUP_CELL_MAX_SIZE + 1];
-+	u32 setting[RCPM_WAKEUP_CELL_MAX_SIZE] = {0};
-+
-+	rcpm = dev_get_drvdata(dev);
-+	if (!rcpm)
-+		return -EINVAL;
-+
-+	base = rcpm->ippdexpcr_base;
-+	idx = wakeup_sources_read_lock();
-+
-+	/* Begin with first registered wakeup source */
-+	for_each_wakeup_source(ws) {
-+
-+		/* skip object which is not attached to device */
-+		if (!ws->dev || !ws->dev->parent)
-+			continue;
-+
-+		ret = device_property_read_u32_array(ws->dev->parent,
-+				"fsl,rcpm-wakeup", value,
-+				rcpm->wakeup_cells + 1);
-+
-+		/*  Wakeup source should refer to current rcpm device */
-+		if (ret || (np->phandle != value[0]))
-+			continue;
-+
-+		/* Property "#fsl,rcpm-wakeup-cells" of rcpm node defines the
-+		 * number of IPPDEXPCR register cells, and "fsl,rcpm-wakeup"
-+		 * of wakeup source IP contains an integer array: <phandle to
-+		 * RCPM node, IPPDEXPCR0 setting, IPPDEXPCR1 setting,
-+		 * IPPDEXPCR2 setting, etc>.
-+		 *
-+		 * So we will go thought them to collect setting data.
-+		 */
-+		for (i = 0; i < rcpm->wakeup_cells; i++)
-+			setting[i] |= value[i + 1];
-+	}
-+
-+	wakeup_sources_read_unlock(idx);
-+
-+	/* Program all IPPDEXPCRn once */
-+	for (i = 0; i < rcpm->wakeup_cells; i++) {
-+		u32 tmp = setting[i];
-+		void __iomem *address = base + i * 4;
-+
-+		if (!tmp)
-+			continue;
-+
-+		/* We can only OR related bits */
-+		if (rcpm->little_endian) {
-+			tmp |= ioread32(address);
-+			iowrite32(tmp, address);
-+		} else {
-+			tmp |= ioread32be(address);
-+			iowrite32be(tmp, address);
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct dev_pm_ops rcpm_pm_ops = {
-+	.prepare =  rcpm_pm_prepare,
-+};
-+
-+static int rcpm_probe(struct platform_device *pdev)
-+{
-+	struct device	*dev = &pdev->dev;
-+	struct resource *r;
-+	struct rcpm	*rcpm;
-+	int ret;
-+
-+	rcpm = devm_kzalloc(dev, sizeof(*rcpm), GFP_KERNEL);
-+	if (!rcpm)
-+		return -ENOMEM;
-+
-+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!r)
-+		return -ENODEV;
-+
-+	rcpm->ippdexpcr_base = devm_ioremap_resource(&pdev->dev, r);
-+	if (IS_ERR(rcpm->ippdexpcr_base)) {
-+		ret =  PTR_ERR(rcpm->ippdexpcr_base);
-+		return ret;
-+	}
-+
-+	rcpm->little_endian = device_property_read_bool(
-+			&pdev->dev, "little-endian");
-+
-+	ret = device_property_read_u32(&pdev->dev,
-+			"#fsl,rcpm-wakeup-cells", &rcpm->wakeup_cells);
-+	if (ret)
-+		return ret;
-+
-+	dev_set_drvdata(&pdev->dev, rcpm);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id rcpm_of_match[] = {
-+	{ .compatible = "fsl,qoriq-rcpm-2.1+", },
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, rcpm_of_match);
-+
-+static struct platform_driver rcpm_driver = {
-+	.driver = {
-+		.name = "rcpm",
-+		.of_match_table = rcpm_of_match,
-+		.pm	= &rcpm_pm_ops,
-+	},
-+	.probe = rcpm_probe,
-+};
-+
-+module_platform_driver(rcpm_driver);
diff --git a/target/linux/layerscape/patches-5.4/813-pm-0002-fsl_pmc-update-device-bindings.patch b/target/linux/layerscape/patches-5.4/813-pm-0002-fsl_pmc-update-device-bindings.patch
deleted file mode 100644
index 988971009e..0000000000
--- a/target/linux/layerscape/patches-5.4/813-pm-0002-fsl_pmc-update-device-bindings.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From f48ec27500239c0400114327ecbbfec34bfc2deb Mon Sep 17 00:00:00 2001
-From: Li Yang <leoli@freescale.com>
-Date: Wed, 22 Feb 2012 15:52:50 +0000
-Subject: [PATCH] fsl_pmc: update device bindings
-
-Signed-off-by: Li Yang <leoyang.li@nxp.com>
-Signed-off-by: Zhao Chenhui <chenhui.zhao@nxp.com>
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
----
- .../devicetree/bindings/powerpc/fsl/pmc.txt        | 59 +++++++++++++---------
- 1 file changed, 34 insertions(+), 25 deletions(-)
-
---- a/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt
-+++ b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt
-@@ -9,15 +9,20 @@ Properties:
- 
-   "fsl,mpc8548-pmc" should be listed for any chip whose PMC is
-   compatible.  "fsl,mpc8536-pmc" should also be listed for any chip
--  whose PMC is compatible, and implies deep-sleep capability.
-+  whose PMC is compatible, and implies deep-sleep capability and
-+  wake on user defined packet(wakeup on ARP).
-+
-+  "fsl,p1022-pmc" should be listed for any chip whose PMC is
-+  compatible, and implies lossless Ethernet capability during sleep.
- 
-   "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is
-   compatible; all statements below that apply to "fsl,mpc8548-pmc" also
-   apply to "fsl,mpc8641d-pmc".
- 
-   Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these
--  bit assignments are indicated via the sleep specifier in each device's
--  sleep property.
-+  bit assignments are indicated via the clock nodes.  Device which has a
-+  controllable clock source should have a "fsl,pmc-handle" property pointing
-+  to the clock node.
- 
- - reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
-   is the PMC block, and the second resource is the Clock Configuration
-@@ -33,31 +38,35 @@ Properties:
-   this is a phandle to an "fsl,gtm" node on which timer 4 can be used as
-   a wakeup source from deep sleep.
- 
--Sleep specifiers:
--
--  fsl,mpc8349-pmc: Sleep specifiers consist of one cell.  For each bit
--  that is set in the cell, the corresponding bit in SCCR will be saved
--  and cleared on suspend, and restored on resume.  This sleep controller
--  supports disabling and resuming devices at any time.
--
--  fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of
--  which will be ORed into PMCDR upon suspend, and cleared from PMCDR
--  upon resume.  The first two cells are as described for fsl,mpc8578-pmc.
--  This sleep controller only supports disabling devices during system
--  sleep, or permanently.
--
--  fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the
--  first of which will be ORed into DEVDISR (and the second into
--  DEVDISR2, if present -- this cell should be zero or absent if the
--  hardware does not have DEVDISR2) upon a request for permanent device
--  disabling.  This sleep controller does not support configuring devices
--  to disable during system sleep (unless supported by another compatible
--  match), or dynamically.
-+Clock nodes:
-+The clock nodes are to describe the masks in PM controller registers for each
-+soc clock.
-+- fsl,pmcdr-mask: For "fsl,mpc8548-pmc"-compatible devices, the mask will be
-+  ORed into PMCDR before suspend if the device using this clock is the wake-up
-+  source and need to be running during low power mode; clear the mask if
-+  otherwise.
-+
-+- fsl,sccr-mask: For "fsl,mpc8349-pmc"-compatible devices, the corresponding
-+  bit specified by the mask in SCCR will be saved and cleared on suspend, and
-+  restored on resume.
-+
-+- fsl,devdisr-mask: Contain one or two cells, depending on the availability of
-+  DEVDISR2 register.  For compatible devices, the mask will be ORed into DEVDISR
-+  or DEVDISR2 when the clock should be permenently disabled.
- 
- Example:
- 
--	power@b00 {
--		compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
--		reg = <0xb00 0x100 0xa00 0x100>;
--		interrupts = <80 8>;
-+	power@e0070 {
-+		compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
-+		reg = <0xe0070 0x20>;
-+
-+		etsec1_clk: soc-clk@24 {
-+			fsl,pmcdr-mask = <0x00000080>;
-+		};
-+		etsec2_clk: soc-clk@25 {
-+			fsl,pmcdr-mask = <0x00000040>;
-+		};
-+		etsec3_clk: soc-clk@26 {
-+			fsl,pmcdr-mask = <0x00000020>;
-+		};
- 	};
diff --git a/target/linux/layerscape/patches-5.4/813-pm-0003-drivers-soc-fsl-add-EPU-FSM-configuration-for-deep-s.patch b/target/linux/layerscape/patches-5.4/813-pm-0003-drivers-soc-fsl-add-EPU-FSM-configuration-for-deep-s.patch
deleted file mode 100644
index 21ac78b68d..0000000000
--- a/target/linux/layerscape/patches-5.4/813-pm-0003-drivers-soc-fsl-add-EPU-FSM-configuration-for-deep-s.patch
+++ /dev/null
@@ -1,464 +0,0 @@
-From 051f3793314e2fb3f1945f3e6fa6942a355ebb50 Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Thu, 12 Apr 2018 14:35:40 +0800
-Subject: [PATCH] drivers/soc/fsl: add EPU FSM configuration for deep sleep
-
-In the last stage of deep sleep, software will trigger a Finite
-State Machine (FSM) to control the hardware procedure, such a
-board isolation, killing PLLs, removing power, and so on.
-
-When the system is waked up by an interrupt, the FSM controls
-the hardware to complete the early resume procedure.
-
-This patch configure the EPU FSM preparing for deep sleep.
-
-Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
-Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com>
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
----
- drivers/soc/fsl/Kconfig     |   7 ++
- drivers/soc/fsl/Makefile    |   1 +
- drivers/soc/fsl/sleep_fsm.c | 279 ++++++++++++++++++++++++++++++++++++++++++++
- drivers/soc/fsl/sleep_fsm.h | 130 +++++++++++++++++++++
- 4 files changed, 417 insertions(+)
- create mode 100644 drivers/soc/fsl/sleep_fsm.c
- create mode 100644 drivers/soc/fsl/sleep_fsm.h
-
---- a/drivers/soc/fsl/Kconfig
-+++ b/drivers/soc/fsl/Kconfig
-@@ -31,6 +31,13 @@ config FSL_MC_DPIO
- 	  objects individually, but groups them under a service layer
- 	  API.
- 
-+config FSL_SLEEP_FSM
-+	bool
-+	help
-+	  This driver configures a hardware FSM (Finite State Machine) for deep sleep.
-+	  The FSM is used to finish clean-ups at the last stage of system entering deep
-+	  sleep, and also wakes up system when a wake up event happens.
-+
- config DPAA2_CONSOLE
- 	tristate "QorIQ DPAA2 console driver"
- 	depends on OF && (ARCH_LAYERSCAPE || COMPILE_TEST)
---- a/drivers/soc/fsl/Makefile
-+++ b/drivers/soc/fsl/Makefile
-@@ -11,3 +11,4 @@ obj-$(CONFIG_FSL_GUTS)			+= guts.o
- obj-$(CONFIG_FSL_MC_DPIO) 		+= dpio/
- obj-$(CONFIG_DPAA2_CONSOLE)		+= dpaa2-console.o
- obj-$(CONFIG_FSL_RCPM)			+= rcpm.o
-+obj-$(CONFIG_FSL_SLEEP_FSM)		+= sleep_fsm.o
---- /dev/null
-+++ b/drivers/soc/fsl/sleep_fsm.c
-@@ -0,0 +1,279 @@
-+/*
-+ * deep sleep FSM (finite-state machine) configuration
-+ *
-+ * Copyright 2018 NXP
-+ *
-+ * Author: Hongbo Zhang <hongbo.zhang@freescale.com>
-+ *         Chenhui Zhao <chenhui.zhao@freescale.com>
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of the above-listed copyright holders nor the
-+ *	 names of any contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
-+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-+ * POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/io.h>
-+#include <linux/types.h>
-+
-+#include "sleep_fsm.h"
-+/*
-+ * These values are from chip's reference manual. For example,
-+ * the values for T1040 can be found in "8.4.3.8 Programming
-+ * supporting deep sleep mode" of Chapter 8 "Run Control and
-+ * Power Management (RCPM)".
-+ * The default value can be applied to T104x, LS1021.
-+ */
-+struct fsm_reg_vals epu_default_val[] = {
-+	/* EPGCR (Event Processor Global Control Register) */
-+	{EPGCR, 0},
-+	/* EPECR (Event Processor Event Control Registers) */
-+	{EPECR0 + EPECR_STRIDE * 0, 0},
-+	{EPECR0 + EPECR_STRIDE * 1, 0},
-+	{EPECR0 + EPECR_STRIDE * 2, 0xF0004004},
-+	{EPECR0 + EPECR_STRIDE * 3, 0x80000084},
-+	{EPECR0 + EPECR_STRIDE * 4, 0x20000084},
-+	{EPECR0 + EPECR_STRIDE * 5, 0x08000004},
-+	{EPECR0 + EPECR_STRIDE * 6, 0x80000084},
-+	{EPECR0 + EPECR_STRIDE * 7, 0x80000084},
-+	{EPECR0 + EPECR_STRIDE * 8, 0x60000084},
-+	{EPECR0 + EPECR_STRIDE * 9, 0x08000084},
-+	{EPECR0 + EPECR_STRIDE * 10, 0x42000084},
-+	{EPECR0 + EPECR_STRIDE * 11, 0x90000084},
-+	{EPECR0 + EPECR_STRIDE * 12, 0x80000084},
-+	{EPECR0 + EPECR_STRIDE * 13, 0x08000084},
-+	{EPECR0 + EPECR_STRIDE * 14, 0x02000084},
-+	{EPECR0 + EPECR_STRIDE * 15, 0x00000004},
-+	/*
-+	 * EPEVTCR (Event Processor EVT Pin Control Registers)
-+	 * SCU8 triger EVT2, and SCU11 triger EVT9
-+	 */
-+	{EPEVTCR0 + EPEVTCR_STRIDE * 0, 0},
-+	{EPEVTCR0 + EPEVTCR_STRIDE * 1, 0},
-+	{EPEVTCR0 + EPEVTCR_STRIDE * 2, 0x80000001},
-+	{EPEVTCR0 + EPEVTCR_STRIDE * 3, 0},
-+	{EPEVTCR0 + EPEVTCR_STRIDE * 4, 0},
-+	{EPEVTCR0 + EPEVTCR_STRIDE * 5, 0},
-+	{EPEVTCR0 + EPEVTCR_STRIDE * 6, 0},
-+	{EPEVTCR0 + EPEVTCR_STRIDE * 7, 0},
-+	{EPEVTCR0 + EPEVTCR_STRIDE * 8, 0},
-+	{EPEVTCR0 + EPEVTCR_STRIDE * 9, 0xB0000001},
-+	/* EPCMPR (Event Processor Counter Compare Registers) */
-+	{EPCMPR0 + EPCMPR_STRIDE * 0, 0},
-+	{EPCMPR0 + EPCMPR_STRIDE * 1, 0},
-+	{EPCMPR0 + EPCMPR_STRIDE * 2, 0x000000FF},
-+	{EPCMPR0 + EPCMPR_STRIDE * 3, 0},
-+	{EPCMPR0 + EPCMPR_STRIDE * 4, 0x000000FF},
-+	{EPCMPR0 + EPCMPR_STRIDE * 5, 0x00000020},
-+	{EPCMPR0 + EPCMPR_STRIDE * 6, 0},
-+	{EPCMPR0 + EPCMPR_STRIDE * 7, 0},
-+	{EPCMPR0 + EPCMPR_STRIDE * 8, 0x000000FF},
-+	{EPCMPR0 + EPCMPR_STRIDE * 9, 0x000000FF},
-+	{EPCMPR0 + EPCMPR_STRIDE * 10, 0x000000FF},
-+	{EPCMPR0 + EPCMPR_STRIDE * 11, 0x000000FF},
-+	{EPCMPR0 + EPCMPR_STRIDE * 12, 0x000000FF},
-+	{EPCMPR0 + EPCMPR_STRIDE * 13, 0},
-+	{EPCMPR0 + EPCMPR_STRIDE * 14, 0x000000FF},
-+	{EPCMPR0 + EPCMPR_STRIDE * 15, 0x000000FF},
-+	/* EPCCR (Event Processor Counter Control Registers) */
-+	{EPCCR0 + EPCCR_STRIDE * 0, 0},
-+	{EPCCR0 + EPCCR_STRIDE * 1, 0},
-+	{EPCCR0 + EPCCR_STRIDE * 2, 0x92840000},
-+	{EPCCR0 + EPCCR_STRIDE * 3, 0},
-+	{EPCCR0 + EPCCR_STRIDE * 4, 0x92840000},
-+	{EPCCR0 + EPCCR_STRIDE * 5, 0x92840000},
-+	{EPCCR0 + EPCCR_STRIDE * 6, 0},
-+	{EPCCR0 + EPCCR_STRIDE * 7, 0},
-+	{EPCCR0 + EPCCR_STRIDE * 8, 0x92840000},
-+	{EPCCR0 + EPCCR_STRIDE * 9, 0x92840000},
-+	{EPCCR0 + EPCCR_STRIDE * 10, 0x92840000},
-+	{EPCCR0 + EPCCR_STRIDE * 11, 0x92840000},
-+	{EPCCR0 + EPCCR_STRIDE * 12, 0x92840000},
-+	{EPCCR0 + EPCCR_STRIDE * 13, 0},
-+	{EPCCR0 + EPCCR_STRIDE * 14, 0x92840000},
-+	{EPCCR0 + EPCCR_STRIDE * 15, 0x92840000},
-+	/* EPSMCR (Event Processor SCU Mux Control Registers) */
-+	{EPSMCR0 + EPSMCR_STRIDE * 0, 0},
-+	{EPSMCR0 + EPSMCR_STRIDE * 1, 0},
-+	{EPSMCR0 + EPSMCR_STRIDE * 2, 0x6C700000},
-+	{EPSMCR0 + EPSMCR_STRIDE * 3, 0x2F000000},
-+	{EPSMCR0 + EPSMCR_STRIDE * 4, 0x002F0000},
-+	{EPSMCR0 + EPSMCR_STRIDE * 5, 0x00002E00},
-+	{EPSMCR0 + EPSMCR_STRIDE * 6, 0x7C000000},
-+	{EPSMCR0 + EPSMCR_STRIDE * 7, 0x30000000},
-+	{EPSMCR0 + EPSMCR_STRIDE * 8, 0x64300000},
-+	{EPSMCR0 + EPSMCR_STRIDE * 9, 0x00003000},
-+	{EPSMCR0 + EPSMCR_STRIDE * 10, 0x65000030},
-+	{EPSMCR0 + EPSMCR_STRIDE * 11, 0x31740000},
-+	{EPSMCR0 + EPSMCR_STRIDE * 12, 0x7F000000},
-+	{EPSMCR0 + EPSMCR_STRIDE * 13, 0x00003100},
-+	{EPSMCR0 + EPSMCR_STRIDE * 14, 0x00000031},
-+	{EPSMCR0 + EPSMCR_STRIDE * 15, 0x76000000},
-+	/* EPACR (Event Processor Action Control Registers) */
-+	{EPACR0 + EPACR_STRIDE * 0, 0},
-+	{EPACR0 + EPACR_STRIDE * 1, 0},
-+	{EPACR0 + EPACR_STRIDE * 2, 0},
-+	{EPACR0 + EPACR_STRIDE * 3, 0x00000080},
-+	{EPACR0 + EPACR_STRIDE * 4, 0},
-+	{EPACR0 + EPACR_STRIDE * 5, 0x00000040},
-+	{EPACR0 + EPACR_STRIDE * 6, 0},
-+	{EPACR0 + EPACR_STRIDE * 7, 0},
-+	{EPACR0 + EPACR_STRIDE * 8, 0},
-+	{EPACR0 + EPACR_STRIDE * 9, 0x0000001C},
-+	{EPACR0 + EPACR_STRIDE * 10, 0x00000020},
-+	{EPACR0 + EPACR_STRIDE * 11, 0},
-+	{EPACR0 + EPACR_STRIDE * 12, 0x00000003},
-+	{EPACR0 + EPACR_STRIDE * 13, 0x06000000},
-+	{EPACR0 + EPACR_STRIDE * 14, 0x04000000},
-+	{EPACR0 + EPACR_STRIDE * 15, 0x02000000},
-+	/* EPIMCR (Event Processor Input Mux Control Registers) */
-+	{EPIMCR0 + EPIMCR_STRIDE * 0, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 1, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 2, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 3, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 4, 0x44000000},
-+	{EPIMCR0 + EPIMCR_STRIDE * 5, 0x40000000},
-+	{EPIMCR0 + EPIMCR_STRIDE * 6, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 7, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 8, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 9, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 10, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 11, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 12, 0x44000000},
-+	{EPIMCR0 + EPIMCR_STRIDE * 13, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 14, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 15, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 16, 0x6A000000},
-+	{EPIMCR0 + EPIMCR_STRIDE * 17, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 18, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 19, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 20, 0x48000000},
-+	{EPIMCR0 + EPIMCR_STRIDE * 21, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 22, 0x6C000000},
-+	{EPIMCR0 + EPIMCR_STRIDE * 23, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 24, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 25, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 26, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 27, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 28, 0x76000000},
-+	{EPIMCR0 + EPIMCR_STRIDE * 29, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 30, 0},
-+	{EPIMCR0 + EPIMCR_STRIDE * 31, 0x76000000},
-+	/* EPXTRIGCR (Event Processor Crosstrigger Control Register) */
-+	{EPXTRIGCR, 0x0000FFDF},
-+	/* end */
-+	{FSM_END_FLAG, 0},
-+};
-+
-+struct fsm_reg_vals npc_default_val[] = {
-+	/* NPC triggered Memory-Mapped Access Registers */
-+	{NCR, 0x80000000},
-+	{MCCR1, 0},
-+	{MCSR1, 0},
-+	{MMAR1LO, 0},
-+	{MMAR1HI, 0},
-+	{MMDR1, 0},
-+	{MCSR2, 0},
-+	{MMAR2LO, 0},
-+	{MMAR2HI, 0},
-+	{MMDR2, 0},
-+	{MCSR3, 0x80000000},
-+	{MMAR3LO, 0x000E2130},
-+	{MMAR3HI, 0x00030000},
-+	{MMDR3, 0x00020000},
-+	/* end */
-+	{FSM_END_FLAG, 0},
-+};
-+
-+/**
-+ * fsl_fsm_setup - Configure EPU's FSM registers
-+ * @base: the base address of registers
-+ * @val: Pointer to address-value pairs for FSM registers
-+ */
-+void fsl_fsm_setup(void __iomem *base, struct fsm_reg_vals *val)
-+{
-+	struct fsm_reg_vals *data = val;
-+
-+	WARN_ON(!base || !data);
-+	while (data->offset != FSM_END_FLAG) {
-+		iowrite32be(data->value, base + data->offset);
-+		data++;
-+	}
-+}
-+
-+void fsl_epu_setup_default(void __iomem *epu_base)
-+{
-+	fsl_fsm_setup(epu_base, epu_default_val);
-+}
-+
-+void fsl_npc_setup_default(void __iomem *npc_base)
-+{
-+	fsl_fsm_setup(npc_base, npc_default_val);
-+}
-+
-+void fsl_epu_clean_default(void __iomem *epu_base)
-+{
-+	u32 offset;
-+
-+	/* follow the exact sequence to clear the registers */
-+	/* Clear EPACRn */
-+	for (offset = EPACR0; offset <= EPACR15; offset += EPACR_STRIDE)
-+		iowrite32be(0, epu_base + offset);
-+
-+	/* Clear EPEVTCRn */
-+	for (offset = EPEVTCR0; offset <= EPEVTCR9; offset += EPEVTCR_STRIDE)
-+		iowrite32be(0, epu_base + offset);
-+
-+	/* Clear EPGCR */
-+	iowrite32be(0, epu_base + EPGCR);
-+
-+	/* Clear EPSMCRn */
-+	for (offset = EPSMCR0; offset <= EPSMCR15; offset += EPSMCR_STRIDE)
-+		iowrite32be(0, epu_base + offset);
-+
-+	/* Clear EPCCRn */
-+	for (offset = EPCCR0; offset <= EPCCR31; offset += EPCCR_STRIDE)
-+		iowrite32be(0, epu_base + offset);
-+
-+	/* Clear EPCMPRn */
-+	for (offset = EPCMPR0; offset <= EPCMPR31; offset += EPCMPR_STRIDE)
-+		iowrite32be(0, epu_base + offset);
-+
-+	/* Clear EPCTRn */
-+	for (offset = EPCTR0; offset <= EPCTR31; offset += EPCTR_STRIDE)
-+		iowrite32be(0, epu_base + offset);
-+
-+	/* Clear EPIMCRn */
-+	for (offset = EPIMCR0; offset <= EPIMCR31; offset += EPIMCR_STRIDE)
-+		iowrite32be(0, epu_base + offset);
-+
-+	/* Clear EPXTRIGCRn */
-+	iowrite32be(0, epu_base + EPXTRIGCR);
-+
-+	/* Clear EPECRn */
-+	for (offset = EPECR0; offset <= EPECR15; offset += EPECR_STRIDE)
-+		iowrite32be(0, epu_base + offset);
-+}
---- /dev/null
-+++ b/drivers/soc/fsl/sleep_fsm.h
-@@ -0,0 +1,130 @@
-+/*
-+ * deep sleep FSM (finite-state machine) configuration
-+ *
-+ * Copyright 2018 NXP
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *	 notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *	 notice, this list of conditions and the following disclaimer in the
-+ *	 documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of the above-listed copyright holders nor the
-+ *	 names of any contributors may be used to endorse or promote products
-+ *	 derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
-+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-+ * POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef _FSL_SLEEP_FSM_H
-+#define _FSL_SLEEP_FSM_H
-+
-+#define FSL_STRIDE_4B	4
-+#define FSL_STRIDE_8B	8
-+
-+/* End flag */
-+#define FSM_END_FLAG		0xFFFFFFFFUL
-+
-+/* Block offsets */
-+#define RCPM_BLOCK_OFFSET	0x00022000
-+#define EPU_BLOCK_OFFSET	0x00000000
-+#define NPC_BLOCK_OFFSET	0x00001000
-+
-+/* EPGCR (Event Processor Global Control Register) */
-+#define EPGCR		0x000
-+
-+/* EPEVTCR0-9 (Event Processor EVT Pin Control Registers) */
-+#define EPEVTCR0	0x050
-+#define EPEVTCR9	0x074
-+#define EPEVTCR_STRIDE	FSL_STRIDE_4B
-+
-+/* EPXTRIGCR (Event Processor Crosstrigger Control Register) */
-+#define EPXTRIGCR	0x090
-+
-+/* EPIMCR0-31 (Event Processor Input Mux Control Registers) */
-+#define EPIMCR0		0x100
-+#define EPIMCR31	0x17C
-+#define EPIMCR_STRIDE	FSL_STRIDE_4B
-+
-+/* EPSMCR0-15 (Event Processor SCU Mux Control Registers) */
-+#define EPSMCR0		0x200
-+#define EPSMCR15	0x278
-+#define EPSMCR_STRIDE	FSL_STRIDE_8B
-+
-+/* EPECR0-15 (Event Processor Event Control Registers) */
-+#define EPECR0		0x300
-+#define EPECR15		0x33C
-+#define EPECR_STRIDE	FSL_STRIDE_4B
-+
-+/* EPACR0-15 (Event Processor Action Control Registers) */
-+#define EPACR0		0x400
-+#define EPACR15		0x43C
-+#define EPACR_STRIDE	FSL_STRIDE_4B
-+
-+/* EPCCRi0-15 (Event Processor Counter Control Registers) */
-+#define EPCCR0		0x800
-+#define EPCCR15		0x83C
-+#define EPCCR31		0x87C
-+#define EPCCR_STRIDE	FSL_STRIDE_4B
-+
-+/* EPCMPR0-15 (Event Processor Counter Compare Registers) */
-+#define EPCMPR0		0x900
-+#define EPCMPR15	0x93C
-+#define EPCMPR31	0x97C
-+#define EPCMPR_STRIDE	FSL_STRIDE_4B
-+
-+/* EPCTR0-31 (Event Processor Counter Register) */
-+#define EPCTR0		0xA00
-+#define EPCTR31		0xA7C
-+#define EPCTR_STRIDE	FSL_STRIDE_4B
-+
-+/* NPC triggered Memory-Mapped Access Registers */
-+#define NCR		0x000
-+#define MCCR1		0x0CC
-+#define MCSR1		0x0D0
-+#define MMAR1LO		0x0D4
-+#define MMAR1HI		0x0D8
-+#define MMDR1		0x0DC
-+#define MCSR2		0x0E0
-+#define MMAR2LO		0x0E4
-+#define MMAR2HI		0x0E8
-+#define MMDR2		0x0EC
-+#define MCSR3		0x0F0
-+#define MMAR3LO		0x0F4
-+#define MMAR3HI		0x0F8
-+#define MMDR3		0x0FC
-+
-+/* RCPM Core State Action Control Register 0 */
-+#define CSTTACR0	0xB00
-+
-+/* RCPM Core Group 1 Configuration Register 0 */
-+#define CG1CR0		0x31C
-+
-+struct fsm_reg_vals {
-+	u32 offset;
-+	u32 value;
-+};
-+
-+void fsl_fsm_setup(void __iomem *base, struct fsm_reg_vals *val);
-+void fsl_epu_setup_default(void __iomem *epu_base);
-+void fsl_npc_setup_default(void __iomem *npc_base);
-+void fsl_epu_clean_default(void __iomem *epu_base);
-+
-+#endif /* _FSL_SLEEP_FSM_H */
diff --git a/target/linux/layerscape/patches-5.4/813-pm-0004-PM-wakeup-Add-routine-to-help-fetch-wakeup-source-ob.patch b/target/linux/layerscape/patches-5.4/813-pm-0004-PM-wakeup-Add-routine-to-help-fetch-wakeup-source-ob.patch
deleted file mode 100644
index 091588b1d7..0000000000
--- a/target/linux/layerscape/patches-5.4/813-pm-0004-PM-wakeup-Add-routine-to-help-fetch-wakeup-source-ob.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From a9647655a2240148b7b6d29227dc76e9d6f12766 Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Thu, 24 Oct 2019 16:36:14 +0800
-Subject: [PATCH] PM: wakeup: Add routine to help fetch wakeup source object.
-
-Some user might want to go through all registered wakeup sources
-and doing things accordingly. For example, SoC PM driver might need to
-do HW programming to prevent powering down specific IP which wakeup
-source depending on. So add this API to help walk through all registered
-wakeup source objects on that list and return them one by one.
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-Tested-by: Leonard Crestez <leonard.crestez@nxp.com>
-Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-Acked-by: Anson Huang <Anson.Huang@nxp.com>
----
- drivers/base/power/wakeup.c | 54 +++++++++++++++++++++++++++++++++++++++++++++
- include/linux/pm_wakeup.h   |  9 ++++++++
- 2 files changed, 63 insertions(+)
-
---- a/drivers/base/power/wakeup.c
-+++ b/drivers/base/power/wakeup.c
-@@ -250,6 +250,60 @@ void wakeup_source_unregister(struct wak
- EXPORT_SYMBOL_GPL(wakeup_source_unregister);
- 
- /**
-+ * wakeup_sources_read_lock - Lock wakeup source list for read.
-+ *
-+ * Returns an index of srcu lock for struct wakeup_srcu.
-+ * This index must be passed to the matching wakeup_sources_read_unlock().
-+ */
-+int wakeup_sources_read_lock(void)
-+{
-+	return srcu_read_lock(&wakeup_srcu);
-+}
-+EXPORT_SYMBOL_GPL(wakeup_sources_read_lock);
-+
-+/**
-+ * wakeup_sources_read_unlock - Unlock wakeup source list.
-+ * @idx: return value from corresponding wakeup_sources_read_lock()
-+ */
-+void wakeup_sources_read_unlock(int idx)
-+{
-+	srcu_read_unlock(&wakeup_srcu, idx);
-+}
-+EXPORT_SYMBOL_GPL(wakeup_sources_read_unlock);
-+
-+/**
-+ * wakeup_sources_walk_start - Begin a walk on wakeup source list
-+ *
-+ * Returns first object of the list of wakeup sources.
-+ *
-+ * Note that to be safe, wakeup sources list needs to be locked by calling
-+ * wakeup_source_read_lock() for this.
-+ */
-+struct wakeup_source *wakeup_sources_walk_start(void)
-+{
-+	struct list_head *ws_head = &wakeup_sources;
-+
-+	return list_entry_rcu(ws_head->next, struct wakeup_source, entry);
-+}
-+EXPORT_SYMBOL_GPL(wakeup_sources_walk_start);
-+
-+/**
-+ * wakeup_sources_walk_next - Get next wakeup source from the list
-+ * @ws: Previous wakeup source object
-+ *
-+ * Note that to be safe, wakeup sources list needs to be locked by calling
-+ * wakeup_source_read_lock() for this.
-+ */
-+struct wakeup_source *wakeup_sources_walk_next(struct wakeup_source *ws)
-+{
-+	struct list_head *ws_head = &wakeup_sources;
-+
-+	return list_next_or_null_rcu(ws_head, &ws->entry,
-+				struct wakeup_source, entry);
-+}
-+EXPORT_SYMBOL_GPL(wakeup_sources_walk_next);
-+
-+/**
-  * device_wakeup_attach - Attach a wakeup source object to a device object.
-  * @dev: Device to handle.
-  * @ws: Wakeup source object to attach to @dev.
---- a/include/linux/pm_wakeup.h
-+++ b/include/linux/pm_wakeup.h
-@@ -63,6 +63,11 @@ struct wakeup_source {
- 	bool			autosleep_enabled:1;
- };
- 
-+#define for_each_wakeup_source(ws) \
-+	for ((ws) = wakeup_sources_walk_start();	\
-+	     (ws);					\
-+	     (ws) = wakeup_sources_walk_next((ws)))
-+
- #ifdef CONFIG_PM_SLEEP
- 
- /*
-@@ -92,6 +97,10 @@ extern void wakeup_source_remove(struct
- extern struct wakeup_source *wakeup_source_register(struct device *dev,
- 						    const char *name);
- extern void wakeup_source_unregister(struct wakeup_source *ws);
-+extern int wakeup_sources_read_lock(void);
-+extern void wakeup_sources_read_unlock(int idx);
-+extern struct wakeup_source *wakeup_sources_walk_start(void);
-+extern struct wakeup_source *wakeup_sources_walk_next(struct wakeup_source *ws);
- extern int device_wakeup_enable(struct device *dev);
- extern int device_wakeup_disable(struct device *dev);
- extern void device_set_wakeup_capable(struct device *dev, bool capable);
diff --git a/target/linux/layerscape/patches-5.4/813-pm-0005-soc-fsl-handle-RCPM-errata-A-008646-on-SoC-LS1021A.patch b/target/linux/layerscape/patches-5.4/813-pm-0005-soc-fsl-handle-RCPM-errata-A-008646-on-SoC-LS1021A.patch
deleted file mode 100644
index faf5627b9d..0000000000
--- a/target/linux/layerscape/patches-5.4/813-pm-0005-soc-fsl-handle-RCPM-errata-A-008646-on-SoC-LS1021A.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 12ae7ff3ecb4527ebe30ec6feb29ebb0ec4cd0a7 Mon Sep 17 00:00:00 2001
-From: Biwen Li <biwen.li@nxp.com>
-Date: Sat, 14 Sep 2019 12:37:49 +0800
-Subject: [PATCH] soc: fsl: handle RCPM errata A-008646 on SoC LS1021A
-
-Description:
-	- Reading configuration register RCPM_IPPDEXPCR1
-	  always return zero
-
-Workaround:
-	- Save register RCPM_IPPDEXPCR1's value to
-	  register SCFG_SPARECR8.(uboot's psci also
-	  need reading value from the register SCFG_SPARECR8
-	  to set register RCPM_IPPDEXPCR1)
-
-Impact:
-	- FlexTimer module will cannot wakeup system in
-	  deep sleep on SoC LS1021A
-
-Reviewed-by: Ran Wang <ran.wang_1@nxp.com>
-Signed-off-by: Biwen Li <biwen.li@nxp.com>
----
- drivers/soc/fsl/rcpm.c | 47 +++++++++++++++++++++++++++++++++++++++++++++--
- 1 file changed, 45 insertions(+), 2 deletions(-)
-
---- a/drivers/soc/fsl/rcpm.c
-+++ b/drivers/soc/fsl/rcpm.c
-@@ -6,13 +6,16 @@
- //
- // Author: Ran Wang <ran.wang_1@nxp.com>
- 
-+#include <linux/acpi.h>
- #include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/mfd/syscon.h>
- #include <linux/module.h>
--#include <linux/platform_device.h>
- #include <linux/of_address.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
- #include <linux/slab.h>
- #include <linux/suspend.h>
--#include <linux/kernel.h>
- 
- #define RCPM_WAKEUP_CELL_MAX_SIZE	7
- 
-@@ -37,6 +40,9 @@ static int rcpm_pm_prepare(struct device
- 	struct device_node	*np = dev->of_node;
- 	u32 value[RCPM_WAKEUP_CELL_MAX_SIZE + 1];
- 	u32 setting[RCPM_WAKEUP_CELL_MAX_SIZE] = {0};
-+	struct regmap *scfg_addr_regmap = NULL;
-+	u32 reg_offset[RCPM_WAKEUP_CELL_MAX_SIZE + 1];
-+	u32 reg_value = 0;
- 
- 	rcpm = dev_get_drvdata(dev);
- 	if (!rcpm)
-@@ -90,6 +96,43 @@ static int rcpm_pm_prepare(struct device
- 			tmp |= ioread32be(address);
- 			iowrite32be(tmp, address);
- 		}
-+		/*
-+		 * Workaround of errata A-008646 on SoC LS1021A:
-+		 * There is a bug of register ippdexpcr1.
-+		 * Reading configuration register RCPM_IPPDEXPCR1
-+		 * always return zero. So save ippdexpcr1's value
-+		 * to register SCFG_SPARECR8.And the value of
-+		 * ippdexpcr1 will be read from SCFG_SPARECR8.
-+		 */
-+		if (device_property_present(dev, "fsl,ippdexpcr1-alt-addr")) {
-+			if (dev_of_node(dev)) {
-+				scfg_addr_regmap = syscon_regmap_lookup_by_phandle(np,
-+										   "fsl,ippdexpcr1-alt-addr");
-+			} else if (is_acpi_node(dev->fwnode)) {
-+				dev_err(dev, "not support acpi for rcpm\n");
-+				continue;
-+			}
-+
-+			if (scfg_addr_regmap && (i == 1)) {
-+				if (device_property_read_u32_array(dev,
-+				    "fsl,ippdexpcr1-alt-addr",
-+				    reg_offset,
-+				    1 + sizeof(u64)/sizeof(u32))) {
-+					scfg_addr_regmap = NULL;
-+					continue;
-+				}
-+				/* Read value from register SCFG_SPARECR8 */
-+				regmap_read(scfg_addr_regmap,
-+					    (u32)(((u64)(reg_offset[1] << (sizeof(u32) * 8) |
-+					    reg_offset[2])) & 0xffffffff),
-+					    &reg_value);
-+				/* Write value to register SCFG_SPARECR8 */
-+				regmap_write(scfg_addr_regmap,
-+					     (u32)(((u64)(reg_offset[1] << (sizeof(u32) * 8) |
-+					     reg_offset[2])) & 0xffffffff),
-+					     tmp | reg_value);
-+			}
-+		}
- 	}
- 
- 	return 0;
diff --git a/target/linux/layerscape/patches-5.4/813-pm-0006-soc-fsl-rcpm-remove-build-warning.patch b/target/linux/layerscape/patches-5.4/813-pm-0006-soc-fsl-rcpm-remove-build-warning.patch
deleted file mode 100644
index e59e4f5109..0000000000
--- a/target/linux/layerscape/patches-5.4/813-pm-0006-soc-fsl-rcpm-remove-build-warning.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 341e6a1cbbc8a06702df15c147cbe1264418bf3b Mon Sep 17 00:00:00 2001
-From: Biwen Li <biwen.li@nxp.com>
-Date: Thu, 5 Dec 2019 17:21:06 +0800
-Subject: [PATCH] soc: fsl: rcpm: remove build warning
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This removes build warning,
-drivers/soc/fsl/rcpm.c: In function ‘rcpm_pm_prepare’:
-drivers/soc/fsl/rcpm.c:126:37: warning: left shift count >= width of type [-Wshift-count-overflow]
-          (u32)(((u64)(reg_offset[1] << (sizeof(u32) * 8) |
-                                     ^~
-drivers/soc/fsl/rcpm.c:131:38: warning: left shift count >= width of type [-Wshift-count-overflow]
-           (u32)(((u64)(reg_offset[1] << (sizeof(u32) * 8) |
-
-Reviewed-by: Ran Wang <ran.wang_1@nxp.com>
-Signed-off-by: Biwen Li <biwen.li@nxp.com>
----
- drivers/soc/fsl/rcpm.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/soc/fsl/rcpm.c
-+++ b/drivers/soc/fsl/rcpm.c
-@@ -123,12 +123,12 @@ static int rcpm_pm_prepare(struct device
- 				}
- 				/* Read value from register SCFG_SPARECR8 */
- 				regmap_read(scfg_addr_regmap,
--					    (u32)(((u64)(reg_offset[1] << (sizeof(u32) * 8) |
-+					    ((((u64)reg_offset[1] << (sizeof(u32) * 8) |
- 					    reg_offset[2])) & 0xffffffff),
- 					    &reg_value);
- 				/* Write value to register SCFG_SPARECR8 */
- 				regmap_write(scfg_addr_regmap,
--					     (u32)(((u64)(reg_offset[1] << (sizeof(u32) * 8) |
-+					     ((((u64)reg_offset[1] << (sizeof(u32) * 8) |
- 					     reg_offset[2])) & 0xffffffff),
- 					     tmp | reg_value);
- 			}
diff --git a/target/linux/layerscape/patches-5.4/814-qe-0001-irqchip-qeic-move-qeic-driver-from-drivers-soc-fsl-q.patch b/target/linux/layerscape/patches-5.4/814-qe-0001-irqchip-qeic-move-qeic-driver-from-drivers-soc-fsl-q.patch
deleted file mode 100644
index bedc902cee..0000000000
--- a/target/linux/layerscape/patches-5.4/814-qe-0001-irqchip-qeic-move-qeic-driver-from-drivers-soc-fsl-q.patch
+++ /dev/null
@@ -1,1243 +0,0 @@
-From 0172b31512827b9fd735df47751c7aa88b6aa5f6 Mon Sep 17 00:00:00 2001
-From: Zhao Qiang <qiang.zhao@nxp.com>
-Date: Thu, 27 Apr 2017 09:52:54 +0800
-Subject: [PATCH] irqchip/qeic: move qeic driver from drivers/soc/fsl/qe
-
-move the driver from drivers/soc/fsl/qe to drivers/irqchip,
-merge qe_ic.h and qe_ic.c into irq-qeic.c.
-
-Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
----
- drivers/irqchip/irq-qeic.c  | 597 ++++++++++++++++++++++++++++++++++++++++++++
- drivers/soc/fsl/qe/Makefile |   2 +-
- drivers/soc/fsl/qe/qe_ic.c  | 508 -------------------------------------
- drivers/soc/fsl/qe/qe_ic.h  |  99 --------
- 4 files changed, 598 insertions(+), 608 deletions(-)
- create mode 100644 drivers/irqchip/irq-qeic.c
- delete mode 100644 drivers/soc/fsl/qe/qe_ic.c
- delete mode 100644 drivers/soc/fsl/qe/qe_ic.h
-
---- /dev/null
-+++ b/drivers/irqchip/irq-qeic.c
-@@ -0,0 +1,597 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * drivers/irqchip/irq-qeic.c
-+ *
-+ * Copyright (C) 2016 Freescale Semiconductor, Inc.  All rights reserved.
-+ *
-+ * Author: Li Yang <leoli@freescale.com>
-+ * Based on code from Shlomi Gridish <gridish@freescale.com>
-+ *
-+ * QUICC ENGINE Interrupt Controller
-+ */
-+
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/reboot.h>
-+#include <linux/slab.h>
-+#include <linux/stddef.h>
-+#include <linux/sched.h>
-+#include <linux/signal.h>
-+#include <linux/device.h>
-+#include <linux/spinlock.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <soc/fsl/qe/qe_ic.h>
-+
-+#define NR_QE_IC_INTS		64
-+
-+/* QE IC registers offset */
-+#define QEIC_CICR		0x00
-+#define QEIC_CIVEC		0x04
-+#define QEIC_CRIPNR		0x08
-+#define QEIC_CIPNR		0x0c
-+#define QEIC_CIPXCC		0x10
-+#define QEIC_CIPYCC		0x14
-+#define QEIC_CIPWCC		0x18
-+#define QEIC_CIPZCC		0x1c
-+#define QEIC_CIMR		0x20
-+#define QEIC_CRIMR		0x24
-+#define QEIC_CICNR		0x28
-+#define QEIC_CIPRTA		0x30
-+#define QEIC_CIPRTB		0x34
-+#define QEIC_CRICR		0x3c
-+#define QEIC_CHIVEC		0x60
-+
-+/* Interrupt priority registers */
-+#define CIPCC_SHIFT_PRI0	29
-+#define CIPCC_SHIFT_PRI1	26
-+#define CIPCC_SHIFT_PRI2	23
-+#define CIPCC_SHIFT_PRI3	20
-+#define CIPCC_SHIFT_PRI4	13
-+#define CIPCC_SHIFT_PRI5	10
-+#define CIPCC_SHIFT_PRI6	7
-+#define CIPCC_SHIFT_PRI7	4
-+
-+/* CICR priority modes */
-+#define CICR_GWCC		0x00040000
-+#define CICR_GXCC		0x00020000
-+#define CICR_GYCC		0x00010000
-+#define CICR_GZCC		0x00080000
-+#define CICR_GRTA		0x00200000
-+#define CICR_GRTB		0x00400000
-+#define CICR_HPIT_SHIFT		8
-+#define CICR_HPIT_MASK		0x00000300
-+#define CICR_HP_SHIFT		24
-+#define CICR_HP_MASK		0x3f000000
-+
-+/* CICNR */
-+#define CICNR_WCC1T_SHIFT	20
-+#define CICNR_ZCC1T_SHIFT	28
-+#define CICNR_YCC1T_SHIFT	12
-+#define CICNR_XCC1T_SHIFT	4
-+
-+/* CRICR */
-+#define CRICR_RTA1T_SHIFT	20
-+#define CRICR_RTB1T_SHIFT	28
-+
-+/* Signal indicator */
-+#define SIGNAL_MASK		3
-+#define SIGNAL_HIGH		2
-+#define SIGNAL_LOW		0
-+
-+struct qe_ic {
-+	/* Control registers offset */
-+	u32 __iomem *regs;
-+
-+	/* The remapper for this QEIC */
-+	struct irq_domain *irqhost;
-+
-+	/* The "linux" controller struct */
-+	struct irq_chip hc_irq;
-+
-+	/* VIRQ numbers of QE high/low irqs */
-+	unsigned int virq_high;
-+	unsigned int virq_low;
-+};
-+
-+/*
-+ * QE interrupt controller internal structure
-+ */
-+struct qe_ic_info {
-+	/* location of this source at the QIMR register. */
-+	u32	mask;
-+
-+	/* Mask register offset */
-+	u32	mask_reg;
-+
-+	/*
-+	 * for grouped interrupts sources - the interrupt
-+	 * code as appears at the group priority register
-+	 */
-+	u8	pri_code;
-+
-+	/* Group priority register offset */
-+	u32	pri_reg;
-+};
-+
-+static DEFINE_RAW_SPINLOCK(qe_ic_lock);
-+
-+static struct qe_ic_info qe_ic_info[] = {
-+	[1] = {
-+	       .mask = 0x00008000,
-+	       .mask_reg = QEIC_CIMR,
-+	       .pri_code = 0,
-+	       .pri_reg = QEIC_CIPWCC,
-+	       },
-+	[2] = {
-+	       .mask = 0x00004000,
-+	       .mask_reg = QEIC_CIMR,
-+	       .pri_code = 1,
-+	       .pri_reg = QEIC_CIPWCC,
-+	       },
-+	[3] = {
-+	       .mask = 0x00002000,
-+	       .mask_reg = QEIC_CIMR,
-+	       .pri_code = 2,
-+	       .pri_reg = QEIC_CIPWCC,
-+	       },
-+	[10] = {
-+		.mask = 0x00000040,
-+		.mask_reg = QEIC_CIMR,
-+		.pri_code = 1,
-+		.pri_reg = QEIC_CIPZCC,
-+		},
-+	[11] = {
-+		.mask = 0x00000020,
-+		.mask_reg = QEIC_CIMR,
-+		.pri_code = 2,
-+		.pri_reg = QEIC_CIPZCC,
-+		},
-+	[12] = {
-+		.mask = 0x00000010,
-+		.mask_reg = QEIC_CIMR,
-+		.pri_code = 3,
-+		.pri_reg = QEIC_CIPZCC,
-+		},
-+	[13] = {
-+		.mask = 0x00000008,
-+		.mask_reg = QEIC_CIMR,
-+		.pri_code = 4,
-+		.pri_reg = QEIC_CIPZCC,
-+		},
-+	[14] = {
-+		.mask = 0x00000004,
-+		.mask_reg = QEIC_CIMR,
-+		.pri_code = 5,
-+		.pri_reg = QEIC_CIPZCC,
-+		},
-+	[15] = {
-+		.mask = 0x00000002,
-+		.mask_reg = QEIC_CIMR,
-+		.pri_code = 6,
-+		.pri_reg = QEIC_CIPZCC,
-+		},
-+	[20] = {
-+		.mask = 0x10000000,
-+		.mask_reg = QEIC_CRIMR,
-+		.pri_code = 3,
-+		.pri_reg = QEIC_CIPRTA,
-+		},
-+	[25] = {
-+		.mask = 0x00800000,
-+		.mask_reg = QEIC_CRIMR,
-+		.pri_code = 0,
-+		.pri_reg = QEIC_CIPRTB,
-+		},
-+	[26] = {
-+		.mask = 0x00400000,
-+		.mask_reg = QEIC_CRIMR,
-+		.pri_code = 1,
-+		.pri_reg = QEIC_CIPRTB,
-+		},
-+	[27] = {
-+		.mask = 0x00200000,
-+		.mask_reg = QEIC_CRIMR,
-+		.pri_code = 2,
-+		.pri_reg = QEIC_CIPRTB,
-+		},
-+	[28] = {
-+		.mask = 0x00100000,
-+		.mask_reg = QEIC_CRIMR,
-+		.pri_code = 3,
-+		.pri_reg = QEIC_CIPRTB,
-+		},
-+	[32] = {
-+		.mask = 0x80000000,
-+		.mask_reg = QEIC_CIMR,
-+		.pri_code = 0,
-+		.pri_reg = QEIC_CIPXCC,
-+		},
-+	[33] = {
-+		.mask = 0x40000000,
-+		.mask_reg = QEIC_CIMR,
-+		.pri_code = 1,
-+		.pri_reg = QEIC_CIPXCC,
-+		},
-+	[34] = {
-+		.mask = 0x20000000,
-+		.mask_reg = QEIC_CIMR,
-+		.pri_code = 2,
-+		.pri_reg = QEIC_CIPXCC,
-+		},
-+	[35] = {
-+		.mask = 0x10000000,
-+		.mask_reg = QEIC_CIMR,
-+		.pri_code = 3,
-+		.pri_reg = QEIC_CIPXCC,
-+		},
-+	[36] = {
-+		.mask = 0x08000000,
-+		.mask_reg = QEIC_CIMR,
-+		.pri_code = 4,
-+		.pri_reg = QEIC_CIPXCC,
-+		},
-+	[40] = {
-+		.mask = 0x00800000,
-+		.mask_reg = QEIC_CIMR,
-+		.pri_code = 0,
-+		.pri_reg = QEIC_CIPYCC,
-+		},
-+	[41] = {
-+		.mask = 0x00400000,
-+		.mask_reg = QEIC_CIMR,
-+		.pri_code = 1,
-+		.pri_reg = QEIC_CIPYCC,
-+		},
-+	[42] = {
-+		.mask = 0x00200000,
-+		.mask_reg = QEIC_CIMR,
-+		.pri_code = 2,
-+		.pri_reg = QEIC_CIPYCC,
-+		},
-+	[43] = {
-+		.mask = 0x00100000,
-+		.mask_reg = QEIC_CIMR,
-+		.pri_code = 3,
-+		.pri_reg = QEIC_CIPYCC,
-+		},
-+};
-+
-+static inline u32 qe_ic_read(volatile __be32  __iomem * base, unsigned int reg)
-+{
-+	return in_be32(base + (reg >> 2));
-+}
-+
-+static inline void qe_ic_write(volatile __be32  __iomem * base, unsigned int reg,
-+			       u32 value)
-+{
-+	out_be32(base + (reg >> 2), value);
-+}
-+
-+static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
-+{
-+	return irq_get_chip_data(virq);
-+}
-+
-+static inline struct qe_ic *qe_ic_from_irq_data(struct irq_data *d)
-+{
-+	return irq_data_get_irq_chip_data(d);
-+}
-+
-+static void qe_ic_unmask_irq(struct irq_data *d)
-+{
-+	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
-+	unsigned int src = irqd_to_hwirq(d);
-+	unsigned long flags;
-+	u32 temp;
-+
-+	raw_spin_lock_irqsave(&qe_ic_lock, flags);
-+
-+	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
-+	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
-+		    temp | qe_ic_info[src].mask);
-+
-+	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
-+}
-+
-+static void qe_ic_mask_irq(struct irq_data *d)
-+{
-+	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
-+	unsigned int src = irqd_to_hwirq(d);
-+	unsigned long flags;
-+	u32 temp;
-+
-+	raw_spin_lock_irqsave(&qe_ic_lock, flags);
-+
-+	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
-+	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
-+		    temp & ~qe_ic_info[src].mask);
-+
-+	/* Flush the above write before enabling interrupts; otherwise,
-+	 * spurious interrupts will sometimes happen.  To be 100% sure
-+	 * that the write has reached the device before interrupts are
-+	 * enabled, the mask register would have to be read back; however,
-+	 * this is not required for correctness, only to avoid wasting
-+	 * time on a large number of spurious interrupts.  In testing,
-+	 * a sync reduced the observed spurious interrupts to zero.
-+	 */
-+	mb();
-+
-+	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
-+}
-+
-+static struct irq_chip qe_ic_irq_chip = {
-+	.name = "QEIC",
-+	.irq_unmask = qe_ic_unmask_irq,
-+	.irq_mask = qe_ic_mask_irq,
-+	.irq_mask_ack = qe_ic_mask_irq,
-+};
-+
-+static int qe_ic_host_match(struct irq_domain *h, struct device_node *node,
-+			    enum irq_domain_bus_token bus_token)
-+{
-+	/* Exact match, unless qe_ic node is NULL */
-+	struct device_node *of_node = irq_domain_get_of_node(h);
-+	return of_node == NULL || of_node == node;
-+}
-+
-+static int qe_ic_host_map(struct irq_domain *h, unsigned int virq,
-+			  irq_hw_number_t hw)
-+{
-+	struct qe_ic *qe_ic = h->host_data;
-+	struct irq_chip *chip;
-+
-+	if (hw >= ARRAY_SIZE(qe_ic_info)) {
-+		pr_err("%s: Invalid hw irq number for QEIC\n", __func__);
-+		return -EINVAL;
-+	}
-+
-+	if (qe_ic_info[hw].mask == 0) {
-+		printk(KERN_ERR "Can't map reserved IRQ\n");
-+		return -EINVAL;
-+	}
-+	/* Default chip */
-+	chip = &qe_ic->hc_irq;
-+
-+	irq_set_chip_data(virq, qe_ic);
-+	irq_set_status_flags(virq, IRQ_LEVEL);
-+
-+	irq_set_chip_and_handler(virq, chip, handle_level_irq);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops qe_ic_host_ops = {
-+	.match = qe_ic_host_match,
-+	.map = qe_ic_host_map,
-+	.xlate = irq_domain_xlate_onetwocell,
-+};
-+
-+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
-+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
-+{
-+	int irq;
-+
-+	BUG_ON(qe_ic == NULL);
-+
-+	/* get the interrupt source vector. */
-+	irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
-+
-+	if (irq == 0)
-+		return NO_IRQ;
-+
-+	return irq_linear_revmap(qe_ic->irqhost, irq);
-+}
-+
-+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
-+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
-+{
-+	int irq;
-+
-+	BUG_ON(qe_ic == NULL);
-+
-+	/* get the interrupt source vector. */
-+	irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
-+
-+	if (irq == 0)
-+		return NO_IRQ;
-+
-+	return irq_linear_revmap(qe_ic->irqhost, irq);
-+}
-+
-+void __init qe_ic_init(struct device_node *node, unsigned int flags,
-+		       void (*low_handler)(struct irq_desc *desc),
-+		       void (*high_handler)(struct irq_desc *desc))
-+{
-+	struct qe_ic *qe_ic;
-+	struct resource res;
-+	u32 temp = 0, ret, high_active = 0;
-+
-+	ret = of_address_to_resource(node, 0, &res);
-+	if (ret)
-+		return;
-+
-+	qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
-+	if (qe_ic == NULL)
-+		return;
-+
-+	qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
-+					       &qe_ic_host_ops, qe_ic);
-+	if (qe_ic->irqhost == NULL) {
-+		kfree(qe_ic);
-+		return;
-+	}
-+
-+	qe_ic->regs = ioremap(res.start, resource_size(&res));
-+
-+	qe_ic->hc_irq = qe_ic_irq_chip;
-+
-+	qe_ic->virq_high = irq_of_parse_and_map(node, 0);
-+	qe_ic->virq_low = irq_of_parse_and_map(node, 1);
-+
-+	if (qe_ic->virq_low == NO_IRQ) {
-+		printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
-+		kfree(qe_ic);
-+		return;
-+	}
-+
-+	/* default priority scheme is grouped. If spread mode is    */
-+	/* required, configure cicr accordingly.                    */
-+	if (flags & QE_IC_SPREADMODE_GRP_W)
-+		temp |= CICR_GWCC;
-+	if (flags & QE_IC_SPREADMODE_GRP_X)
-+		temp |= CICR_GXCC;
-+	if (flags & QE_IC_SPREADMODE_GRP_Y)
-+		temp |= CICR_GYCC;
-+	if (flags & QE_IC_SPREADMODE_GRP_Z)
-+		temp |= CICR_GZCC;
-+	if (flags & QE_IC_SPREADMODE_GRP_RISCA)
-+		temp |= CICR_GRTA;
-+	if (flags & QE_IC_SPREADMODE_GRP_RISCB)
-+		temp |= CICR_GRTB;
-+
-+	/* choose destination signal for highest priority interrupt */
-+	if (flags & QE_IC_HIGH_SIGNAL) {
-+		temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
-+		high_active = 1;
-+	}
-+
-+	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
-+
-+	irq_set_handler_data(qe_ic->virq_low, qe_ic);
-+	irq_set_chained_handler(qe_ic->virq_low, low_handler);
-+
-+	if (qe_ic->virq_high != NO_IRQ &&
-+			qe_ic->virq_high != qe_ic->virq_low) {
-+		irq_set_handler_data(qe_ic->virq_high, qe_ic);
-+		irq_set_chained_handler(qe_ic->virq_high, high_handler);
-+	}
-+}
-+
-+void qe_ic_set_highest_priority(unsigned int virq, int high)
-+{
-+	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
-+	unsigned int src = virq_to_hw(virq);
-+	u32 temp = 0;
-+
-+	temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
-+
-+	temp &= ~CICR_HP_MASK;
-+	temp |= src << CICR_HP_SHIFT;
-+
-+	temp &= ~CICR_HPIT_MASK;
-+	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
-+
-+	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
-+}
-+
-+/* Set Priority level within its group, from 1 to 8 */
-+int qe_ic_set_priority(unsigned int virq, unsigned int priority)
-+{
-+	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
-+	unsigned int src = virq_to_hw(virq);
-+	u32 temp;
-+
-+	if (priority > 8 || priority == 0)
-+		return -EINVAL;
-+	if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
-+		      "%s: Invalid hw irq number for QEIC\n", __func__))
-+		return -EINVAL;
-+	if (qe_ic_info[src].pri_reg == 0)
-+		return -EINVAL;
-+
-+	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
-+
-+	if (priority < 4) {
-+		temp &= ~(0x7 << (32 - priority * 3));
-+		temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
-+	} else {
-+		temp &= ~(0x7 << (24 - priority * 3));
-+		temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
-+	}
-+
-+	qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
-+
-+	return 0;
-+}
-+
-+/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
-+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
-+{
-+	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
-+	unsigned int src = virq_to_hw(virq);
-+	u32 temp, control_reg = QEIC_CICNR, shift = 0;
-+
-+	if (priority > 2 || priority == 0)
-+		return -EINVAL;
-+	if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
-+		      "%s: Invalid hw irq number for QEIC\n", __func__))
-+		return -EINVAL;
-+
-+	switch (qe_ic_info[src].pri_reg) {
-+	case QEIC_CIPZCC:
-+		shift = CICNR_ZCC1T_SHIFT;
-+		break;
-+	case QEIC_CIPWCC:
-+		shift = CICNR_WCC1T_SHIFT;
-+		break;
-+	case QEIC_CIPYCC:
-+		shift = CICNR_YCC1T_SHIFT;
-+		break;
-+	case QEIC_CIPXCC:
-+		shift = CICNR_XCC1T_SHIFT;
-+		break;
-+	case QEIC_CIPRTA:
-+		shift = CRICR_RTA1T_SHIFT;
-+		control_reg = QEIC_CRICR;
-+		break;
-+	case QEIC_CIPRTB:
-+		shift = CRICR_RTB1T_SHIFT;
-+		control_reg = QEIC_CRICR;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	shift += (2 - priority) * 2;
-+	temp = qe_ic_read(qe_ic->regs, control_reg);
-+	temp &= ~(SIGNAL_MASK << shift);
-+	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
-+	qe_ic_write(qe_ic->regs, control_reg, temp);
-+
-+	return 0;
-+}
-+
-+static struct bus_type qe_ic_subsys = {
-+	.name = "qe_ic",
-+	.dev_name = "qe_ic",
-+};
-+
-+static struct device device_qe_ic = {
-+	.id = 0,
-+	.bus = &qe_ic_subsys,
-+};
-+
-+static int __init init_qe_ic_sysfs(void)
-+{
-+	int rc;
-+
-+	printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
-+
-+	rc = subsys_system_register(&qe_ic_subsys, NULL);
-+	if (rc) {
-+		printk(KERN_ERR "Failed registering qe_ic sys class\n");
-+		return -ENODEV;
-+	}
-+	rc = device_register(&device_qe_ic);
-+	if (rc) {
-+		printk(KERN_ERR "Failed registering qe_ic sys device\n");
-+		return -ENODEV;
-+	}
-+	return 0;
-+}
-+
-+subsys_initcall(init_qe_ic_sysfs);
---- a/drivers/soc/fsl/qe/Makefile
-+++ b/drivers/soc/fsl/qe/Makefile
-@@ -2,7 +2,7 @@
- #
- # Makefile for the linux ppc-specific parts of QE
- #
--obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_ic.o qe_io.o
-+obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_io.o
- obj-$(CONFIG_CPM)	+= qe_common.o
- obj-$(CONFIG_UCC)	+= ucc.o
- obj-$(CONFIG_UCC_SLOW)	+= ucc_slow.o
---- a/drivers/soc/fsl/qe/qe_ic.c
-+++ /dev/null
-@@ -1,508 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-or-later
--/*
-- * arch/powerpc/sysdev/qe_lib/qe_ic.c
-- *
-- * Copyright (C) 2006 Freescale Semiconductor, Inc.  All rights reserved.
-- *
-- * Author: Li Yang <leoli@freescale.com>
-- * Based on code from Shlomi Gridish <gridish@freescale.com>
-- *
-- * QUICC ENGINE Interrupt Controller
-- */
--
--#include <linux/of_irq.h>
--#include <linux/of_address.h>
--#include <linux/kernel.h>
--#include <linux/init.h>
--#include <linux/errno.h>
--#include <linux/reboot.h>
--#include <linux/slab.h>
--#include <linux/stddef.h>
--#include <linux/sched.h>
--#include <linux/signal.h>
--#include <linux/device.h>
--#include <linux/spinlock.h>
--#include <asm/irq.h>
--#include <asm/io.h>
--#include <soc/fsl/qe/qe_ic.h>
--
--#include "qe_ic.h"
--
--static DEFINE_RAW_SPINLOCK(qe_ic_lock);
--
--static struct qe_ic_info qe_ic_info[] = {
--	[1] = {
--	       .mask = 0x00008000,
--	       .mask_reg = QEIC_CIMR,
--	       .pri_code = 0,
--	       .pri_reg = QEIC_CIPWCC,
--	       },
--	[2] = {
--	       .mask = 0x00004000,
--	       .mask_reg = QEIC_CIMR,
--	       .pri_code = 1,
--	       .pri_reg = QEIC_CIPWCC,
--	       },
--	[3] = {
--	       .mask = 0x00002000,
--	       .mask_reg = QEIC_CIMR,
--	       .pri_code = 2,
--	       .pri_reg = QEIC_CIPWCC,
--	       },
--	[10] = {
--		.mask = 0x00000040,
--		.mask_reg = QEIC_CIMR,
--		.pri_code = 1,
--		.pri_reg = QEIC_CIPZCC,
--		},
--	[11] = {
--		.mask = 0x00000020,
--		.mask_reg = QEIC_CIMR,
--		.pri_code = 2,
--		.pri_reg = QEIC_CIPZCC,
--		},
--	[12] = {
--		.mask = 0x00000010,
--		.mask_reg = QEIC_CIMR,
--		.pri_code = 3,
--		.pri_reg = QEIC_CIPZCC,
--		},
--	[13] = {
--		.mask = 0x00000008,
--		.mask_reg = QEIC_CIMR,
--		.pri_code = 4,
--		.pri_reg = QEIC_CIPZCC,
--		},
--	[14] = {
--		.mask = 0x00000004,
--		.mask_reg = QEIC_CIMR,
--		.pri_code = 5,
--		.pri_reg = QEIC_CIPZCC,
--		},
--	[15] = {
--		.mask = 0x00000002,
--		.mask_reg = QEIC_CIMR,
--		.pri_code = 6,
--		.pri_reg = QEIC_CIPZCC,
--		},
--	[20] = {
--		.mask = 0x10000000,
--		.mask_reg = QEIC_CRIMR,
--		.pri_code = 3,
--		.pri_reg = QEIC_CIPRTA,
--		},
--	[25] = {
--		.mask = 0x00800000,
--		.mask_reg = QEIC_CRIMR,
--		.pri_code = 0,
--		.pri_reg = QEIC_CIPRTB,
--		},
--	[26] = {
--		.mask = 0x00400000,
--		.mask_reg = QEIC_CRIMR,
--		.pri_code = 1,
--		.pri_reg = QEIC_CIPRTB,
--		},
--	[27] = {
--		.mask = 0x00200000,
--		.mask_reg = QEIC_CRIMR,
--		.pri_code = 2,
--		.pri_reg = QEIC_CIPRTB,
--		},
--	[28] = {
--		.mask = 0x00100000,
--		.mask_reg = QEIC_CRIMR,
--		.pri_code = 3,
--		.pri_reg = QEIC_CIPRTB,
--		},
--	[32] = {
--		.mask = 0x80000000,
--		.mask_reg = QEIC_CIMR,
--		.pri_code = 0,
--		.pri_reg = QEIC_CIPXCC,
--		},
--	[33] = {
--		.mask = 0x40000000,
--		.mask_reg = QEIC_CIMR,
--		.pri_code = 1,
--		.pri_reg = QEIC_CIPXCC,
--		},
--	[34] = {
--		.mask = 0x20000000,
--		.mask_reg = QEIC_CIMR,
--		.pri_code = 2,
--		.pri_reg = QEIC_CIPXCC,
--		},
--	[35] = {
--		.mask = 0x10000000,
--		.mask_reg = QEIC_CIMR,
--		.pri_code = 3,
--		.pri_reg = QEIC_CIPXCC,
--		},
--	[36] = {
--		.mask = 0x08000000,
--		.mask_reg = QEIC_CIMR,
--		.pri_code = 4,
--		.pri_reg = QEIC_CIPXCC,
--		},
--	[40] = {
--		.mask = 0x00800000,
--		.mask_reg = QEIC_CIMR,
--		.pri_code = 0,
--		.pri_reg = QEIC_CIPYCC,
--		},
--	[41] = {
--		.mask = 0x00400000,
--		.mask_reg = QEIC_CIMR,
--		.pri_code = 1,
--		.pri_reg = QEIC_CIPYCC,
--		},
--	[42] = {
--		.mask = 0x00200000,
--		.mask_reg = QEIC_CIMR,
--		.pri_code = 2,
--		.pri_reg = QEIC_CIPYCC,
--		},
--	[43] = {
--		.mask = 0x00100000,
--		.mask_reg = QEIC_CIMR,
--		.pri_code = 3,
--		.pri_reg = QEIC_CIPYCC,
--		},
--};
--
--static inline u32 qe_ic_read(volatile __be32  __iomem * base, unsigned int reg)
--{
--	return in_be32(base + (reg >> 2));
--}
--
--static inline void qe_ic_write(volatile __be32  __iomem * base, unsigned int reg,
--			       u32 value)
--{
--	out_be32(base + (reg >> 2), value);
--}
--
--static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
--{
--	return irq_get_chip_data(virq);
--}
--
--static inline struct qe_ic *qe_ic_from_irq_data(struct irq_data *d)
--{
--	return irq_data_get_irq_chip_data(d);
--}
--
--static void qe_ic_unmask_irq(struct irq_data *d)
--{
--	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
--	unsigned int src = irqd_to_hwirq(d);
--	unsigned long flags;
--	u32 temp;
--
--	raw_spin_lock_irqsave(&qe_ic_lock, flags);
--
--	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
--	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
--		    temp | qe_ic_info[src].mask);
--
--	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
--}
--
--static void qe_ic_mask_irq(struct irq_data *d)
--{
--	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
--	unsigned int src = irqd_to_hwirq(d);
--	unsigned long flags;
--	u32 temp;
--
--	raw_spin_lock_irqsave(&qe_ic_lock, flags);
--
--	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
--	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
--		    temp & ~qe_ic_info[src].mask);
--
--	/* Flush the above write before enabling interrupts; otherwise,
--	 * spurious interrupts will sometimes happen.  To be 100% sure
--	 * that the write has reached the device before interrupts are
--	 * enabled, the mask register would have to be read back; however,
--	 * this is not required for correctness, only to avoid wasting
--	 * time on a large number of spurious interrupts.  In testing,
--	 * a sync reduced the observed spurious interrupts to zero.
--	 */
--	mb();
--
--	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
--}
--
--static struct irq_chip qe_ic_irq_chip = {
--	.name = "QEIC",
--	.irq_unmask = qe_ic_unmask_irq,
--	.irq_mask = qe_ic_mask_irq,
--	.irq_mask_ack = qe_ic_mask_irq,
--};
--
--static int qe_ic_host_match(struct irq_domain *h, struct device_node *node,
--			    enum irq_domain_bus_token bus_token)
--{
--	/* Exact match, unless qe_ic node is NULL */
--	struct device_node *of_node = irq_domain_get_of_node(h);
--	return of_node == NULL || of_node == node;
--}
--
--static int qe_ic_host_map(struct irq_domain *h, unsigned int virq,
--			  irq_hw_number_t hw)
--{
--	struct qe_ic *qe_ic = h->host_data;
--	struct irq_chip *chip;
--
--	if (hw >= ARRAY_SIZE(qe_ic_info)) {
--		pr_err("%s: Invalid hw irq number for QEIC\n", __func__);
--		return -EINVAL;
--	}
--
--	if (qe_ic_info[hw].mask == 0) {
--		printk(KERN_ERR "Can't map reserved IRQ\n");
--		return -EINVAL;
--	}
--	/* Default chip */
--	chip = &qe_ic->hc_irq;
--
--	irq_set_chip_data(virq, qe_ic);
--	irq_set_status_flags(virq, IRQ_LEVEL);
--
--	irq_set_chip_and_handler(virq, chip, handle_level_irq);
--
--	return 0;
--}
--
--static const struct irq_domain_ops qe_ic_host_ops = {
--	.match = qe_ic_host_match,
--	.map = qe_ic_host_map,
--	.xlate = irq_domain_xlate_onetwocell,
--};
--
--/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
--unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
--{
--	int irq;
--
--	BUG_ON(qe_ic == NULL);
--
--	/* get the interrupt source vector. */
--	irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
--
--	if (irq == 0)
--		return NO_IRQ;
--
--	return irq_linear_revmap(qe_ic->irqhost, irq);
--}
--
--/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
--unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
--{
--	int irq;
--
--	BUG_ON(qe_ic == NULL);
--
--	/* get the interrupt source vector. */
--	irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
--
--	if (irq == 0)
--		return NO_IRQ;
--
--	return irq_linear_revmap(qe_ic->irqhost, irq);
--}
--
--void __init qe_ic_init(struct device_node *node, unsigned int flags,
--		       void (*low_handler)(struct irq_desc *desc),
--		       void (*high_handler)(struct irq_desc *desc))
--{
--	struct qe_ic *qe_ic;
--	struct resource res;
--	u32 temp = 0, ret, high_active = 0;
--
--	ret = of_address_to_resource(node, 0, &res);
--	if (ret)
--		return;
--
--	qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
--	if (qe_ic == NULL)
--		return;
--
--	qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
--					       &qe_ic_host_ops, qe_ic);
--	if (qe_ic->irqhost == NULL) {
--		kfree(qe_ic);
--		return;
--	}
--
--	qe_ic->regs = ioremap(res.start, resource_size(&res));
--
--	qe_ic->hc_irq = qe_ic_irq_chip;
--
--	qe_ic->virq_high = irq_of_parse_and_map(node, 0);
--	qe_ic->virq_low = irq_of_parse_and_map(node, 1);
--
--	if (qe_ic->virq_low == NO_IRQ) {
--		printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
--		kfree(qe_ic);
--		return;
--	}
--
--	/* default priority scheme is grouped. If spread mode is    */
--	/* required, configure cicr accordingly.                    */
--	if (flags & QE_IC_SPREADMODE_GRP_W)
--		temp |= CICR_GWCC;
--	if (flags & QE_IC_SPREADMODE_GRP_X)
--		temp |= CICR_GXCC;
--	if (flags & QE_IC_SPREADMODE_GRP_Y)
--		temp |= CICR_GYCC;
--	if (flags & QE_IC_SPREADMODE_GRP_Z)
--		temp |= CICR_GZCC;
--	if (flags & QE_IC_SPREADMODE_GRP_RISCA)
--		temp |= CICR_GRTA;
--	if (flags & QE_IC_SPREADMODE_GRP_RISCB)
--		temp |= CICR_GRTB;
--
--	/* choose destination signal for highest priority interrupt */
--	if (flags & QE_IC_HIGH_SIGNAL) {
--		temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
--		high_active = 1;
--	}
--
--	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
--
--	irq_set_handler_data(qe_ic->virq_low, qe_ic);
--	irq_set_chained_handler(qe_ic->virq_low, low_handler);
--
--	if (qe_ic->virq_high != NO_IRQ &&
--			qe_ic->virq_high != qe_ic->virq_low) {
--		irq_set_handler_data(qe_ic->virq_high, qe_ic);
--		irq_set_chained_handler(qe_ic->virq_high, high_handler);
--	}
--}
--
--void qe_ic_set_highest_priority(unsigned int virq, int high)
--{
--	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
--	unsigned int src = virq_to_hw(virq);
--	u32 temp = 0;
--
--	temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
--
--	temp &= ~CICR_HP_MASK;
--	temp |= src << CICR_HP_SHIFT;
--
--	temp &= ~CICR_HPIT_MASK;
--	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
--
--	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
--}
--
--/* Set Priority level within its group, from 1 to 8 */
--int qe_ic_set_priority(unsigned int virq, unsigned int priority)
--{
--	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
--	unsigned int src = virq_to_hw(virq);
--	u32 temp;
--
--	if (priority > 8 || priority == 0)
--		return -EINVAL;
--	if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
--		      "%s: Invalid hw irq number for QEIC\n", __func__))
--		return -EINVAL;
--	if (qe_ic_info[src].pri_reg == 0)
--		return -EINVAL;
--
--	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
--
--	if (priority < 4) {
--		temp &= ~(0x7 << (32 - priority * 3));
--		temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
--	} else {
--		temp &= ~(0x7 << (24 - priority * 3));
--		temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
--	}
--
--	qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
--
--	return 0;
--}
--
--/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
--int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
--{
--	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
--	unsigned int src = virq_to_hw(virq);
--	u32 temp, control_reg = QEIC_CICNR, shift = 0;
--
--	if (priority > 2 || priority == 0)
--		return -EINVAL;
--	if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
--		      "%s: Invalid hw irq number for QEIC\n", __func__))
--		return -EINVAL;
--
--	switch (qe_ic_info[src].pri_reg) {
--	case QEIC_CIPZCC:
--		shift = CICNR_ZCC1T_SHIFT;
--		break;
--	case QEIC_CIPWCC:
--		shift = CICNR_WCC1T_SHIFT;
--		break;
--	case QEIC_CIPYCC:
--		shift = CICNR_YCC1T_SHIFT;
--		break;
--	case QEIC_CIPXCC:
--		shift = CICNR_XCC1T_SHIFT;
--		break;
--	case QEIC_CIPRTA:
--		shift = CRICR_RTA1T_SHIFT;
--		control_reg = QEIC_CRICR;
--		break;
--	case QEIC_CIPRTB:
--		shift = CRICR_RTB1T_SHIFT;
--		control_reg = QEIC_CRICR;
--		break;
--	default:
--		return -EINVAL;
--	}
--
--	shift += (2 - priority) * 2;
--	temp = qe_ic_read(qe_ic->regs, control_reg);
--	temp &= ~(SIGNAL_MASK << shift);
--	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
--	qe_ic_write(qe_ic->regs, control_reg, temp);
--
--	return 0;
--}
--
--static struct bus_type qe_ic_subsys = {
--	.name = "qe_ic",
--	.dev_name = "qe_ic",
--};
--
--static struct device device_qe_ic = {
--	.id = 0,
--	.bus = &qe_ic_subsys,
--};
--
--static int __init init_qe_ic_sysfs(void)
--{
--	int rc;
--
--	printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
--
--	rc = subsys_system_register(&qe_ic_subsys, NULL);
--	if (rc) {
--		printk(KERN_ERR "Failed registering qe_ic sys class\n");
--		return -ENODEV;
--	}
--	rc = device_register(&device_qe_ic);
--	if (rc) {
--		printk(KERN_ERR "Failed registering qe_ic sys device\n");
--		return -ENODEV;
--	}
--	return 0;
--}
--
--subsys_initcall(init_qe_ic_sysfs);
---- a/drivers/soc/fsl/qe/qe_ic.h
-+++ /dev/null
-@@ -1,99 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0-or-later */
--/*
-- * drivers/soc/fsl/qe/qe_ic.h
-- *
-- * QUICC ENGINE Interrupt Controller Header
-- *
-- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
-- *
-- * Author: Li Yang <leoli@freescale.com>
-- * Based on code from Shlomi Gridish <gridish@freescale.com>
-- */
--#ifndef _POWERPC_SYSDEV_QE_IC_H
--#define _POWERPC_SYSDEV_QE_IC_H
--
--#include <soc/fsl/qe/qe_ic.h>
--
--#define NR_QE_IC_INTS		64
--
--/* QE IC registers offset */
--#define QEIC_CICR		0x00
--#define QEIC_CIVEC		0x04
--#define QEIC_CRIPNR		0x08
--#define QEIC_CIPNR		0x0c
--#define QEIC_CIPXCC		0x10
--#define QEIC_CIPYCC		0x14
--#define QEIC_CIPWCC		0x18
--#define QEIC_CIPZCC		0x1c
--#define QEIC_CIMR		0x20
--#define QEIC_CRIMR		0x24
--#define QEIC_CICNR		0x28
--#define QEIC_CIPRTA		0x30
--#define QEIC_CIPRTB		0x34
--#define QEIC_CRICR		0x3c
--#define QEIC_CHIVEC		0x60
--
--/* Interrupt priority registers */
--#define CIPCC_SHIFT_PRI0	29
--#define CIPCC_SHIFT_PRI1	26
--#define CIPCC_SHIFT_PRI2	23
--#define CIPCC_SHIFT_PRI3	20
--#define CIPCC_SHIFT_PRI4	13
--#define CIPCC_SHIFT_PRI5	10
--#define CIPCC_SHIFT_PRI6	7
--#define CIPCC_SHIFT_PRI7	4
--
--/* CICR priority modes */
--#define CICR_GWCC		0x00040000
--#define CICR_GXCC		0x00020000
--#define CICR_GYCC		0x00010000
--#define CICR_GZCC		0x00080000
--#define CICR_GRTA		0x00200000
--#define CICR_GRTB		0x00400000
--#define CICR_HPIT_SHIFT		8
--#define CICR_HPIT_MASK		0x00000300
--#define CICR_HP_SHIFT		24
--#define CICR_HP_MASK		0x3f000000
--
--/* CICNR */
--#define CICNR_WCC1T_SHIFT	20
--#define CICNR_ZCC1T_SHIFT	28
--#define CICNR_YCC1T_SHIFT	12
--#define CICNR_XCC1T_SHIFT	4
--
--/* CRICR */
--#define CRICR_RTA1T_SHIFT	20
--#define CRICR_RTB1T_SHIFT	28
--
--/* Signal indicator */
--#define SIGNAL_MASK		3
--#define SIGNAL_HIGH		2
--#define SIGNAL_LOW		0
--
--struct qe_ic {
--	/* Control registers offset */
--	volatile u32 __iomem *regs;
--
--	/* The remapper for this QEIC */
--	struct irq_domain *irqhost;
--
--	/* The "linux" controller struct */
--	struct irq_chip hc_irq;
--
--	/* VIRQ numbers of QE high/low irqs */
--	unsigned int virq_high;
--	unsigned int virq_low;
--};
--
--/*
-- * QE interrupt controller internal structure
-- */
--struct qe_ic_info {
--	u32	mask;	  /* location of this source at the QIMR register. */
--	u32	mask_reg; /* Mask register offset */
--	u8	pri_code; /* for grouped interrupts sources - the interrupt
--			     code as appears at the group priority register */
--	u32	pri_reg;  /* Group priority register offset */
--};
--
--#endif /* _POWERPC_SYSDEV_QE_IC_H */
diff --git a/target/linux/layerscape/patches-5.4/814-qe-0002-irqchip-qeic-merge-qeic-init-code-from-platforms-to-.patch b/target/linux/layerscape/patches-5.4/814-qe-0002-irqchip-qeic-merge-qeic-init-code-from-platforms-to-.patch
deleted file mode 100644
index 73656ce900..0000000000
--- a/target/linux/layerscape/patches-5.4/814-qe-0002-irqchip-qeic-merge-qeic-init-code-from-platforms-to-.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 61c30dbddd180c5bc0d544a81970765a009f7deb Mon Sep 17 00:00:00 2001
-From: Zhao Qiang <qiang.zhao@nxp.com>
-Date: Thu, 27 Apr 2017 09:54:22 +0800
-Subject: [PATCH] irqchip/qeic: merge qeic init code from platforms to a common
- function
-
-The codes of qe_ic init from a variety of platforms are redundant,
-merge them to a common function and put it to irqchip/irq-qeic.c
-
-For non-p1021_mds mpc85xx_mds boards, use "qe_ic_init(np, 0,
-qe_ic_cascade_low_mpic, qe_ic_cascade_high_mpic);" instead of
-"qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);".
-
-qe_ic_cascade_muxed_mpic was used for boards has the same interrupt
-number for low interrupt and high interrupt, qe_ic_init has checked
-if "low interrupt == high interrupt"
-
-Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
----
- drivers/irqchip/irq-qeic.c | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/drivers/irqchip/irq-qeic.c
-+++ b/drivers/irqchip/irq-qeic.c
-@@ -594,4 +594,15 @@ static int __init init_qe_ic_sysfs(void)
- 	return 0;
- }
- 
-+static int __init qeic_of_init(struct device_node *node,
-+			       struct device_node *parent)
-+{
-+	if (!node)
-+		return;
-+	qe_ic_init(node, 0, qe_ic_cascade_low_mpic,
-+		   qe_ic_cascade_high_mpic);
-+	of_node_put(node);
-+}
-+
-+IRQCHIP_DECLARE(qeic, "fsl,qe-ic", qeic_of_init);
- subsys_initcall(init_qe_ic_sysfs);
diff --git a/target/linux/layerscape/patches-5.4/814-qe-0003-irqchip-qeic-merge-qeic_of_init-into-qe_ic_init.patch b/target/linux/layerscape/patches-5.4/814-qe-0003-irqchip-qeic-merge-qeic_of_init-into-qe_ic_init.patch
deleted file mode 100644
index 877cd94e0d..0000000000
--- a/target/linux/layerscape/patches-5.4/814-qe-0003-irqchip-qeic-merge-qeic_of_init-into-qe_ic_init.patch
+++ /dev/null
@@ -1,173 +0,0 @@
-From 25694a71e1958a4d72891b99b6a2805b7a7bffff Mon Sep 17 00:00:00 2001
-From: Zhao Qiang <qiang.zhao@nxp.com>
-Date: Tue, 14 Mar 2017 10:40:38 +0800
-Subject: [PATCH] irqchip/qeic: merge qeic_of_init into qe_ic_init
-
-qeic_of_init just get device_node of qeic from dtb and call qe_ic_init,
-pass the device_node to qe_ic_init.
-So merge qeic_of_init into qe_ic_init to get the qeic node in
-qe_ic_init.
-
-Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
----
- drivers/irqchip/irq-qeic.c | 89 ++++++++++++++++++++--------------------------
- include/soc/fsl/qe/qe_ic.h |  7 ----
- 2 files changed, 39 insertions(+), 57 deletions(-)
-
---- a/drivers/irqchip/irq-qeic.c
-+++ b/drivers/irqchip/irq-qeic.c
-@@ -402,27 +402,33 @@ unsigned int qe_ic_get_high_irq(struct q
- 	return irq_linear_revmap(qe_ic->irqhost, irq);
- }
- 
--void __init qe_ic_init(struct device_node *node, unsigned int flags,
--		       void (*low_handler)(struct irq_desc *desc),
--		       void (*high_handler)(struct irq_desc *desc))
-+static int __init qe_ic_init(struct device_node *node, unsigned int flags)
- {
- 	struct qe_ic *qe_ic;
- 	struct resource res;
--	u32 temp = 0, ret, high_active = 0;
-+	u32 temp = 0, high_active = 0;
-+	int ret = 0;
-+
-+	if (!node)
-+		return -ENODEV;
- 
- 	ret = of_address_to_resource(node, 0, &res);
--	if (ret)
--		return;
-+	if (ret) {
-+		ret = -ENODEV;
-+		goto err_put_node;
-+	}
- 
- 	qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
--	if (qe_ic == NULL)
--		return;
-+	if (qe_ic == NULL) {
-+		ret = -ENOMEM;
-+		goto err_put_node;
-+	}
- 
- 	qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
- 					       &qe_ic_host_ops, qe_ic);
- 	if (qe_ic->irqhost == NULL) {
--		kfree(qe_ic);
--		return;
-+		ret = -ENOMEM;
-+		goto err_free_qe_ic;
- 	}
- 
- 	qe_ic->regs = ioremap(res.start, resource_size(&res));
-@@ -433,9 +439,9 @@ void __init qe_ic_init(struct device_nod
- 	qe_ic->virq_low = irq_of_parse_and_map(node, 1);
- 
- 	if (qe_ic->virq_low == NO_IRQ) {
--		printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
--		kfree(qe_ic);
--		return;
-+		pr_err("Failed to map QE_IC low IRQ\n");
-+		ret = -ENOMEM;
-+		goto err_domain_remove;
- 	}
- 
- 	/* default priority scheme is grouped. If spread mode is    */
-@@ -462,13 +468,24 @@ void __init qe_ic_init(struct device_nod
- 	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
- 
- 	irq_set_handler_data(qe_ic->virq_low, qe_ic);
--	irq_set_chained_handler(qe_ic->virq_low, low_handler);
-+	irq_set_chained_handler(qe_ic->virq_low, qe_ic_cascade_low_mpic);
- 
- 	if (qe_ic->virq_high != NO_IRQ &&
- 			qe_ic->virq_high != qe_ic->virq_low) {
- 		irq_set_handler_data(qe_ic->virq_high, qe_ic);
--		irq_set_chained_handler(qe_ic->virq_high, high_handler);
-+		irq_set_chained_handler(qe_ic->virq_high,
-+					qe_ic_cascade_high_mpic);
- 	}
-+	of_node_put(node);
-+	return 0;
-+
-+err_domain_remove:
-+	irq_domain_remove(qe_ic->irqhost);
-+err_free_qe_ic:
-+	kfree(qe_ic);
-+err_put_node:
-+	of_node_put(node);
-+	return ret;
- }
- 
- void qe_ic_set_highest_priority(unsigned int virq, int high)
-@@ -565,44 +582,16 @@ int qe_ic_set_high_priority(unsigned int
- 	return 0;
- }
- 
--static struct bus_type qe_ic_subsys = {
--	.name = "qe_ic",
--	.dev_name = "qe_ic",
--};
--
--static struct device device_qe_ic = {
--	.id = 0,
--	.bus = &qe_ic_subsys,
--};
--
--static int __init init_qe_ic_sysfs(void)
-+static int __init init_qe_ic(struct device_node *node,
-+			     struct device_node *parent)
- {
--	int rc;
-+	int ret;
- 
--	printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
-+	ret = qe_ic_init(node, 0);
-+	if (ret)
-+		return ret;
- 
--	rc = subsys_system_register(&qe_ic_subsys, NULL);
--	if (rc) {
--		printk(KERN_ERR "Failed registering qe_ic sys class\n");
--		return -ENODEV;
--	}
--	rc = device_register(&device_qe_ic);
--	if (rc) {
--		printk(KERN_ERR "Failed registering qe_ic sys device\n");
--		return -ENODEV;
--	}
- 	return 0;
- }
- 
--static int __init qeic_of_init(struct device_node *node,
--			       struct device_node *parent)
--{
--	if (!node)
--		return;
--	qe_ic_init(node, 0, qe_ic_cascade_low_mpic,
--		   qe_ic_cascade_high_mpic);
--	of_node_put(node);
--}
--
--IRQCHIP_DECLARE(qeic, "fsl,qe-ic", qeic_of_init);
--subsys_initcall(init_qe_ic_sysfs);
-+IRQCHIP_DECLARE(qeic, "fsl,qe-ic", init_qe_ic);
---- a/include/soc/fsl/qe/qe_ic.h
-+++ b/include/soc/fsl/qe/qe_ic.h
-@@ -54,16 +54,9 @@ enum qe_ic_grp_id {
- };
- 
- #ifdef CONFIG_QUICC_ENGINE
--void qe_ic_init(struct device_node *node, unsigned int flags,
--		void (*low_handler)(struct irq_desc *desc),
--		void (*high_handler)(struct irq_desc *desc));
- unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
- unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
- #else
--static inline void qe_ic_init(struct device_node *node, unsigned int flags,
--		void (*low_handler)(struct irq_desc *desc),
--		void (*high_handler)(struct irq_desc *desc))
--{}
- static inline unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
- { return 0; }
- static inline unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
diff --git a/target/linux/layerscape/patches-5.4/814-qe-0004-irqchip-qeic-remove-PPCisms-for-QEIC.patch b/target/linux/layerscape/patches-5.4/814-qe-0004-irqchip-qeic-remove-PPCisms-for-QEIC.patch
deleted file mode 100644
index fbb6867812..0000000000
--- a/target/linux/layerscape/patches-5.4/814-qe-0004-irqchip-qeic-remove-PPCisms-for-QEIC.patch
+++ /dev/null
@@ -1,453 +0,0 @@
-From c9e8d4b75d48f02731f25e55247017d60c59d510 Mon Sep 17 00:00:00 2001
-From: Zhao Qiang <qiang.zhao@nxp.com>
-Date: Thu, 27 Apr 2017 09:56:20 +0800
-Subject: [PATCH] irqchip/qeic: remove PPCisms for QEIC
-
-QEIC was supported on PowerPC, and dependent on PPC,
-Now it is supported on other platforms, so remove PPCisms.
-
-Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
----
- drivers/irqchip/irq-qeic.c | 220 +++++++++++++++++++++++----------------------
- include/soc/fsl/qe/qe_ic.h | 128 --------------------------
- 2 files changed, 112 insertions(+), 236 deletions(-)
- delete mode 100644 include/soc/fsl/qe/qe_ic.h
-
---- a/drivers/irqchip/irq-qeic.c
-+++ b/drivers/irqchip/irq-qeic.c
-@@ -14,7 +14,11 @@
- #include <linux/of_address.h>
- #include <linux/kernel.h>
- #include <linux/init.h>
-+#include <linux/irqdomain.h>
-+#include <linux/irqchip.h>
- #include <linux/errno.h>
-+#include <linux/of_address.h>
-+#include <linux/of_irq.h>
- #include <linux/reboot.h>
- #include <linux/slab.h>
- #include <linux/stddef.h>
-@@ -22,9 +26,8 @@
- #include <linux/signal.h>
- #include <linux/device.h>
- #include <linux/spinlock.h>
--#include <asm/irq.h>
-+#include <linux/irq.h>
- #include <asm/io.h>
--#include <soc/fsl/qe/qe_ic.h>
- 
- #define NR_QE_IC_INTS		64
- 
-@@ -82,6 +85,43 @@
- #define SIGNAL_HIGH		2
- #define SIGNAL_LOW		0
- 
-+#define NUM_OF_QE_IC_GROUPS	6
-+
-+/* Flags when we init the QE IC */
-+#define QE_IC_SPREADMODE_GRP_W			0x00000001
-+#define QE_IC_SPREADMODE_GRP_X			0x00000002
-+#define QE_IC_SPREADMODE_GRP_Y			0x00000004
-+#define QE_IC_SPREADMODE_GRP_Z			0x00000008
-+#define QE_IC_SPREADMODE_GRP_RISCA		0x00000010
-+#define QE_IC_SPREADMODE_GRP_RISCB		0x00000020
-+
-+#define QE_IC_LOW_SIGNAL			0x00000100
-+#define QE_IC_HIGH_SIGNAL			0x00000200
-+
-+#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH	0x00001000
-+#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH	0x00002000
-+#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH	0x00004000
-+#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH	0x00008000
-+#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH	0x00010000
-+#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH	0x00020000
-+#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH	0x00040000
-+#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH	0x00080000
-+#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH	0x00100000
-+#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH	0x00200000
-+#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH	0x00400000
-+#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH	0x00800000
-+#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT		(12)
-+
-+/* QE interrupt sources groups */
-+enum qe_ic_grp_id {
-+	QE_IC_GRP_W = 0,	/* QE interrupt controller group W */
-+	QE_IC_GRP_X,		/* QE interrupt controller group X */
-+	QE_IC_GRP_Y,		/* QE interrupt controller group Y */
-+	QE_IC_GRP_Z,		/* QE interrupt controller group Z */
-+	QE_IC_GRP_RISCA,	/* QE interrupt controller RISC group A */
-+	QE_IC_GRP_RISCB		/* QE interrupt controller RISC group B */
-+};
-+
- struct qe_ic {
- 	/* Control registers offset */
- 	u32 __iomem *regs;
-@@ -260,15 +300,15 @@ static struct qe_ic_info qe_ic_info[] =
- 		},
- };
- 
--static inline u32 qe_ic_read(volatile __be32  __iomem * base, unsigned int reg)
-+static inline u32 qe_ic_read(__be32  __iomem *base, unsigned int reg)
- {
--	return in_be32(base + (reg >> 2));
-+	return ioread32be(base + (reg >> 2));
- }
- 
--static inline void qe_ic_write(volatile __be32  __iomem * base, unsigned int reg,
-+static inline void qe_ic_write(__be32  __iomem *base, unsigned int reg,
- 			       u32 value)
- {
--	out_be32(base + (reg >> 2), value);
-+	iowrite32be(value, base + (reg >> 2));
- }
- 
- static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
-@@ -370,8 +410,8 @@ static const struct irq_domain_ops qe_ic
- 	.xlate = irq_domain_xlate_onetwocell,
- };
- 
--/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
--unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
-+/* Return an interrupt vector or 0 if no interrupt is pending. */
-+static unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
- {
- 	int irq;
- 
-@@ -381,13 +421,13 @@ unsigned int qe_ic_get_low_irq(struct qe
- 	irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
- 
- 	if (irq == 0)
--		return NO_IRQ;
-+		return 0;
- 
- 	return irq_linear_revmap(qe_ic->irqhost, irq);
- }
- 
--/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
--unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
-+/* Return an interrupt vector or 0 if no interrupt is pending. */
-+static unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
- {
- 	int irq;
- 
-@@ -397,11 +437,69 @@ unsigned int qe_ic_get_high_irq(struct q
- 	irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
- 
- 	if (irq == 0)
--		return NO_IRQ;
-+		return 0;
- 
- 	return irq_linear_revmap(qe_ic->irqhost, irq);
- }
- 
-+static inline void qe_ic_cascade_low_ipic(struct irq_desc *desc)
-+{
-+	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
-+	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
-+
-+	if (cascade_irq != 0)
-+		generic_handle_irq(cascade_irq);
-+}
-+
-+static inline void qe_ic_cascade_high_ipic(struct irq_desc *desc)
-+{
-+	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
-+	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
-+
-+	if (cascade_irq != 0)
-+		generic_handle_irq(cascade_irq);
-+}
-+
-+static inline void qe_ic_cascade_low_mpic(struct irq_desc *desc)
-+{
-+	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
-+	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+
-+	if (cascade_irq != 0)
-+		generic_handle_irq(cascade_irq);
-+
-+	chip->irq_eoi(&desc->irq_data);
-+}
-+
-+static inline void qe_ic_cascade_high_mpic(struct irq_desc *desc)
-+{
-+	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
-+	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+
-+	if (cascade_irq != 0)
-+		generic_handle_irq(cascade_irq);
-+
-+	chip->irq_eoi(&desc->irq_data);
-+}
-+
-+static inline void qe_ic_cascade_muxed_mpic(struct irq_desc *desc)
-+{
-+	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
-+	unsigned int cascade_irq;
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+
-+	cascade_irq = qe_ic_get_high_irq(qe_ic);
-+	if (cascade_irq == 0)
-+		cascade_irq = qe_ic_get_low_irq(qe_ic);
-+
-+	if (cascade_irq != 0)
-+		generic_handle_irq(cascade_irq);
-+
-+	chip->irq_eoi(&desc->irq_data);
-+}
-+
- static int __init qe_ic_init(struct device_node *node, unsigned int flags)
- {
- 	struct qe_ic *qe_ic;
-@@ -438,7 +536,7 @@ static int __init qe_ic_init(struct devi
- 	qe_ic->virq_high = irq_of_parse_and_map(node, 0);
- 	qe_ic->virq_low = irq_of_parse_and_map(node, 1);
- 
--	if (qe_ic->virq_low == NO_IRQ) {
-+	if (qe_ic->virq_low == 0) {
- 		pr_err("Failed to map QE_IC low IRQ\n");
- 		ret = -ENOMEM;
- 		goto err_domain_remove;
-@@ -470,7 +568,7 @@ static int __init qe_ic_init(struct devi
- 	irq_set_handler_data(qe_ic->virq_low, qe_ic);
- 	irq_set_chained_handler(qe_ic->virq_low, qe_ic_cascade_low_mpic);
- 
--	if (qe_ic->virq_high != NO_IRQ &&
-+	if (qe_ic->virq_high != 0 &&
- 			qe_ic->virq_high != qe_ic->virq_low) {
- 		irq_set_handler_data(qe_ic->virq_high, qe_ic);
- 		irq_set_chained_handler(qe_ic->virq_high,
-@@ -488,100 +586,6 @@ err_put_node:
- 	return ret;
- }
- 
--void qe_ic_set_highest_priority(unsigned int virq, int high)
--{
--	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
--	unsigned int src = virq_to_hw(virq);
--	u32 temp = 0;
--
--	temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
--
--	temp &= ~CICR_HP_MASK;
--	temp |= src << CICR_HP_SHIFT;
--
--	temp &= ~CICR_HPIT_MASK;
--	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
--
--	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
--}
--
--/* Set Priority level within its group, from 1 to 8 */
--int qe_ic_set_priority(unsigned int virq, unsigned int priority)
--{
--	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
--	unsigned int src = virq_to_hw(virq);
--	u32 temp;
--
--	if (priority > 8 || priority == 0)
--		return -EINVAL;
--	if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
--		      "%s: Invalid hw irq number for QEIC\n", __func__))
--		return -EINVAL;
--	if (qe_ic_info[src].pri_reg == 0)
--		return -EINVAL;
--
--	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
--
--	if (priority < 4) {
--		temp &= ~(0x7 << (32 - priority * 3));
--		temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
--	} else {
--		temp &= ~(0x7 << (24 - priority * 3));
--		temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
--	}
--
--	qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
--
--	return 0;
--}
--
--/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
--int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
--{
--	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
--	unsigned int src = virq_to_hw(virq);
--	u32 temp, control_reg = QEIC_CICNR, shift = 0;
--
--	if (priority > 2 || priority == 0)
--		return -EINVAL;
--	if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
--		      "%s: Invalid hw irq number for QEIC\n", __func__))
--		return -EINVAL;
--
--	switch (qe_ic_info[src].pri_reg) {
--	case QEIC_CIPZCC:
--		shift = CICNR_ZCC1T_SHIFT;
--		break;
--	case QEIC_CIPWCC:
--		shift = CICNR_WCC1T_SHIFT;
--		break;
--	case QEIC_CIPYCC:
--		shift = CICNR_YCC1T_SHIFT;
--		break;
--	case QEIC_CIPXCC:
--		shift = CICNR_XCC1T_SHIFT;
--		break;
--	case QEIC_CIPRTA:
--		shift = CRICR_RTA1T_SHIFT;
--		control_reg = QEIC_CRICR;
--		break;
--	case QEIC_CIPRTB:
--		shift = CRICR_RTB1T_SHIFT;
--		control_reg = QEIC_CRICR;
--		break;
--	default:
--		return -EINVAL;
--	}
--
--	shift += (2 - priority) * 2;
--	temp = qe_ic_read(qe_ic->regs, control_reg);
--	temp &= ~(SIGNAL_MASK << shift);
--	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
--	qe_ic_write(qe_ic->regs, control_reg, temp);
--
--	return 0;
--}
--
- static int __init init_qe_ic(struct device_node *node,
- 			     struct device_node *parent)
- {
---- a/include/soc/fsl/qe/qe_ic.h
-+++ /dev/null
-@@ -1,128 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0-or-later */
--/*
-- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
-- *
-- * Authors: 	Shlomi Gridish <gridish@freescale.com>
-- * 		Li Yang <leoli@freescale.com>
-- *
-- * Description:
-- * QE IC external definitions and structure.
-- */
--#ifndef _ASM_POWERPC_QE_IC_H
--#define _ASM_POWERPC_QE_IC_H
--
--#include <linux/irq.h>
--
--struct device_node;
--struct qe_ic;
--
--#define NUM_OF_QE_IC_GROUPS	6
--
--/* Flags when we init the QE IC */
--#define QE_IC_SPREADMODE_GRP_W			0x00000001
--#define QE_IC_SPREADMODE_GRP_X			0x00000002
--#define QE_IC_SPREADMODE_GRP_Y			0x00000004
--#define QE_IC_SPREADMODE_GRP_Z			0x00000008
--#define QE_IC_SPREADMODE_GRP_RISCA		0x00000010
--#define QE_IC_SPREADMODE_GRP_RISCB		0x00000020
--
--#define QE_IC_LOW_SIGNAL			0x00000100
--#define QE_IC_HIGH_SIGNAL			0x00000200
--
--#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH	0x00001000
--#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH	0x00002000
--#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH	0x00004000
--#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH	0x00008000
--#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH	0x00010000
--#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH	0x00020000
--#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH	0x00040000
--#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH	0x00080000
--#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH	0x00100000
--#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH	0x00200000
--#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH	0x00400000
--#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH	0x00800000
--#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT		(12)
--
--/* QE interrupt sources groups */
--enum qe_ic_grp_id {
--	QE_IC_GRP_W = 0,	/* QE interrupt controller group W */
--	QE_IC_GRP_X,		/* QE interrupt controller group X */
--	QE_IC_GRP_Y,		/* QE interrupt controller group Y */
--	QE_IC_GRP_Z,		/* QE interrupt controller group Z */
--	QE_IC_GRP_RISCA,	/* QE interrupt controller RISC group A */
--	QE_IC_GRP_RISCB		/* QE interrupt controller RISC group B */
--};
--
--#ifdef CONFIG_QUICC_ENGINE
--unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
--unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
--#else
--static inline unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
--{ return 0; }
--static inline unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
--{ return 0; }
--#endif /* CONFIG_QUICC_ENGINE */
--
--void qe_ic_set_highest_priority(unsigned int virq, int high);
--int qe_ic_set_priority(unsigned int virq, unsigned int priority);
--int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
--
--static inline void qe_ic_cascade_low_ipic(struct irq_desc *desc)
--{
--	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
--	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
--
--	if (cascade_irq != NO_IRQ)
--		generic_handle_irq(cascade_irq);
--}
--
--static inline void qe_ic_cascade_high_ipic(struct irq_desc *desc)
--{
--	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
--	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
--
--	if (cascade_irq != NO_IRQ)
--		generic_handle_irq(cascade_irq);
--}
--
--static inline void qe_ic_cascade_low_mpic(struct irq_desc *desc)
--{
--	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
--	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
--	struct irq_chip *chip = irq_desc_get_chip(desc);
--
--	if (cascade_irq != NO_IRQ)
--		generic_handle_irq(cascade_irq);
--
--	chip->irq_eoi(&desc->irq_data);
--}
--
--static inline void qe_ic_cascade_high_mpic(struct irq_desc *desc)
--{
--	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
--	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
--	struct irq_chip *chip = irq_desc_get_chip(desc);
--
--	if (cascade_irq != NO_IRQ)
--		generic_handle_irq(cascade_irq);
--
--	chip->irq_eoi(&desc->irq_data);
--}
--
--static inline void qe_ic_cascade_muxed_mpic(struct irq_desc *desc)
--{
--	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
--	unsigned int cascade_irq;
--	struct irq_chip *chip = irq_desc_get_chip(desc);
--
--	cascade_irq = qe_ic_get_high_irq(qe_ic);
--	if (cascade_irq == NO_IRQ)
--		cascade_irq = qe_ic_get_low_irq(qe_ic);
--
--	if (cascade_irq != NO_IRQ)
--		generic_handle_irq(cascade_irq);
--
--	chip->irq_eoi(&desc->irq_data);
--}
--
--#endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/target/linux/layerscape/patches-5.4/814-qe-0005-QE-remove-PPCisms-for-QE.patch b/target/linux/layerscape/patches-5.4/814-qe-0005-QE-remove-PPCisms-for-QE.patch
deleted file mode 100644
index 496cd3cacf..0000000000
--- a/target/linux/layerscape/patches-5.4/814-qe-0005-QE-remove-PPCisms-for-QE.patch
+++ /dev/null
@@ -1,547 +0,0 @@
-From 3fb2f44e30cc3a151a0fa8160d8bf70062722ed7 Mon Sep 17 00:00:00 2001
-From: Zhao Qiang <qiang.zhao@nxp.com>
-Date: Thu, 27 Apr 2017 09:47:29 +0800
-Subject: [PATCH] QE: remove PPCisms for QE
-
-QE was supported on PowerPC, and dependent on PPC,
-Now it is supported on other platforms. so remove PPCisms.
-
-Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
----
- drivers/soc/fsl/qe/Kconfig    |  2 +-
- drivers/soc/fsl/qe/qe.c       | 70 +++++++++++++++++++++++++---------------
- drivers/soc/fsl/qe/qe_io.c    | 42 +++++++++++-------------
- drivers/soc/fsl/qe/qe_tdm.c   |  8 ++---
- drivers/soc/fsl/qe/ucc.c      | 10 +++---
- drivers/soc/fsl/qe/ucc_fast.c | 74 ++++++++++++++++++++++---------------------
- drivers/tty/serial/ucc_uart.c |  1 +
- include/soc/fsl/qe/qe.h       |  1 -
- 8 files changed, 112 insertions(+), 96 deletions(-)
-
---- a/drivers/soc/fsl/qe/Kconfig
-+++ b/drivers/soc/fsl/qe/Kconfig
-@@ -5,7 +5,7 @@
- 
- config QUICC_ENGINE
- 	bool "QUICC Engine (QE) framework support"
--	depends on FSL_SOC && PPC32
-+	depends on OF && HAS_IOMEM
- 	select GENERIC_ALLOCATOR
- 	select CRC32
- 	help
---- a/drivers/soc/fsl/qe/qe.c
-+++ b/drivers/soc/fsl/qe/qe.c
-@@ -30,8 +30,6 @@
- #include <asm/pgtable.h>
- #include <soc/fsl/qe/immap_qe.h>
- #include <soc/fsl/qe/qe.h>
--#include <asm/prom.h>
--#include <asm/rheap.h>
- 
- static void qe_snums_init(void);
- static int qe_sdma_init(void);
-@@ -104,15 +102,27 @@ void qe_reset(void)
- 		panic("sdma init failed!");
- }
- 
-+/* issue commands to QE, return 0 on success while -EIO on error
-+ *
-+ * @cmd: the command code, should be QE_INIT_TX_RX, QE_STOP_TX and so on
-+ * @device: which sub-block will run the command, QE_CR_SUBBLOCK_UCCFAST1 - 8
-+ * , QE_CR_SUBBLOCK_UCCSLOW1 - 8, QE_CR_SUBBLOCK_MCC1 - 3,
-+ * QE_CR_SUBBLOCK_IDMA1 - 4 and such on.
-+ * @mcn_protocol: specifies mode for the command for non-MCC, should be
-+ * QE_CR_PROTOCOL_HDLC_TRANSPARENT, QE_CR_PROTOCOL_QMC, QE_CR_PROTOCOL_UART
-+ * and such on.
-+ * @cmd_input: command related data.
-+ */
- int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
- {
- 	unsigned long flags;
- 	u8 mcn_shift = 0, dev_shift = 0;
--	u32 ret;
-+	int ret;
-+	int i;
- 
- 	spin_lock_irqsave(&qe_lock, flags);
- 	if (cmd == QE_RESET) {
--		out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
-+		iowrite32be((cmd | QE_CR_FLG), &qe_immr->cp.cecr);
- 	} else {
- 		if (cmd == QE_ASSIGN_PAGE) {
- 			/* Here device is the SNUM, not sub-block */
-@@ -129,20 +139,26 @@ int qe_issue_cmd(u32 cmd, u32 device, u8
- 				mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
- 		}
- 
--		out_be32(&qe_immr->cp.cecdr, cmd_input);
--		out_be32(&qe_immr->cp.cecr,
--			 (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
--			  mcn_protocol << mcn_shift));
-+		iowrite32be(cmd_input, &qe_immr->cp.cecdr);
-+		iowrite32be((cmd | QE_CR_FLG | ((u32)device << dev_shift) |
-+			    (u32)mcn_protocol << mcn_shift), &qe_immr->cp.cecr);
- 	}
- 
- 	/* wait for the QE_CR_FLG to clear */
--	ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
--			   100, 0);
-+	ret = -EIO;
-+	for (i = 0; i < 100; i++) {
-+		if ((ioread32be(&qe_immr->cp.cecr) & QE_CR_FLG) == 0) {
-+			ret = 0;
-+			break;
-+		}
-+		udelay(1);
-+	}
-+
- 	/* On timeout (e.g. failure), the expression will be false (ret == 0),
- 	   otherwise it will be true (ret == 1). */
- 	spin_unlock_irqrestore(&qe_lock, flags);
- 
--	return ret == 1;
-+	return ret;
- }
- EXPORT_SYMBOL(qe_issue_cmd);
- 
-@@ -167,6 +183,8 @@ unsigned int qe_get_brg_clk(void)
- 	int size;
- 	const u32 *prop;
- 	unsigned int mod;
-+	u32 val;
-+	int ret;
- 
- 	if (brg_clk)
- 		return brg_clk;
-@@ -175,9 +193,9 @@ unsigned int qe_get_brg_clk(void)
- 	if (!qe)
- 		return brg_clk;
- 
--	prop = of_get_property(qe, "brg-frequency", &size);
--	if (prop && size == sizeof(*prop))
--		brg_clk = *prop;
-+	ret = of_property_read_u32(qe, "brg-frequency", &val);
-+	if (!ret)
-+		brg_clk = val;
- 
- 	of_node_put(qe);
- 
-@@ -223,14 +241,16 @@ int qe_setbrg(enum qe_clock brg, unsigne
- 	/* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
- 	   that the BRG divisor must be even if you're not using divide-by-16
- 	   mode. */
-+#ifdef CONFIG_PPC
- 	if (pvr_version_is(PVR_VER_836x) || pvr_version_is(PVR_VER_832x))
- 		if (!div16 && (divisor & 1) && (divisor > 3))
- 			divisor++;
-+#endif
- 
- 	tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
- 		QE_BRGC_ENABLE | div16;
- 
--	out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval);
-+	iowrite32be(tempval, &qe_immr->brg.brgc[brg - QE_BRG1]);
- 
- 	return 0;
- }
-@@ -377,9 +397,9 @@ static int qe_sdma_init(void)
- 			return -ENOMEM;
- 	}
- 
--	out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
-- 	out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
-- 					(0x1 << QE_SDMR_CEN_SHIFT)));
-+	iowrite32be((u32)sdma_buf_offset & QE_SDEBCR_BA_MASK, &sdma->sdebcr);
-+	iowrite32be((QE_SDMR_GLB_1_MSK | (0x1 << QE_SDMR_CEN_SHIFT)),
-+		    &sdma->sdmr);
- 
- 	return 0;
- }
-@@ -417,14 +437,14 @@ static void qe_upload_microcode(const vo
- 			"uploading microcode '%s'\n", ucode->id);
- 
- 	/* Use auto-increment */
--	out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
--		QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);
-+	iowrite32be(be32_to_cpu(ucode->iram_offset) | QE_IRAM_IADD_AIE |
-+		    QE_IRAM_IADD_BADDR, &qe_immr->iram.iadd);
- 
- 	for (i = 0; i < be32_to_cpu(ucode->count); i++)
--		out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
-+		iowrite32be(be32_to_cpu(code[i]), &qe_immr->iram.idata);
- 	
- 	/* Set I-RAM Ready Register */
--	out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY));
-+	iowrite32be(be32_to_cpu(QE_IRAM_READY), &qe_immr->iram.iready);
- }
- 
- /*
-@@ -509,7 +529,7 @@ int qe_upload_firmware(const struct qe_f
- 	 * If the microcode calls for it, split the I-RAM.
- 	 */
- 	if (!firmware->split)
--		setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
-+		qe_setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
- 
- 	if (firmware->soc.model)
- 		printk(KERN_INFO
-@@ -543,11 +563,11 @@ int qe_upload_firmware(const struct qe_f
- 			u32 trap = be32_to_cpu(ucode->traps[j]);
- 
- 			if (trap)
--				out_be32(&qe_immr->rsp[i].tibcr[j], trap);
-+				iowrite32be(trap, &qe_immr->rsp[i].tibcr[j]);
- 		}
- 
- 		/* Enable traps */
--		out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
-+		iowrite32be(be32_to_cpu(ucode->eccr), &qe_immr->rsp[i].eccr);
- 	}
- 
- 	qe_firmware_uploaded = 1;
---- a/drivers/soc/fsl/qe/qe_io.c
-+++ b/drivers/soc/fsl/qe/qe_io.c
-@@ -18,8 +18,6 @@
- 
- #include <asm/io.h>
- #include <soc/fsl/qe/qe.h>
--#include <asm/prom.h>
--#include <sysdev/fsl_soc.h>
- 
- #undef DEBUG
- 
-@@ -57,16 +55,16 @@ void __par_io_config_pin(struct qe_pio_r
- 	pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1)));
- 
- 	/* Set open drain, if required */
--	tmp_val = in_be32(&par_io->cpodr);
-+	tmp_val = ioread32be(&par_io->cpodr);
- 	if (open_drain)
--		out_be32(&par_io->cpodr, pin_mask1bit | tmp_val);
-+		iowrite32be(pin_mask1bit | tmp_val, &par_io->cpodr);
- 	else
--		out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val);
-+		iowrite32be(~pin_mask1bit & tmp_val, &par_io->cpodr);
- 
- 	/* define direction */
- 	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
--		in_be32(&par_io->cpdir2) :
--		in_be32(&par_io->cpdir1);
-+		ioread32be(&par_io->cpdir2) :
-+		ioread32be(&par_io->cpdir1);
- 
- 	/* get all bits mask for 2 bit per port */
- 	pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS -
-@@ -78,34 +76,30 @@ void __par_io_config_pin(struct qe_pio_r
- 
- 	/* clear and set 2 bits mask */
- 	if (pin > (QE_PIO_PINS / 2) - 1) {
--		out_be32(&par_io->cpdir2,
--			 ~pin_mask2bits & tmp_val);
-+		iowrite32be(~pin_mask2bits & tmp_val, &par_io->cpdir2);
- 		tmp_val &= ~pin_mask2bits;
--		out_be32(&par_io->cpdir2, new_mask2bits | tmp_val);
-+		iowrite32be(new_mask2bits | tmp_val, &par_io->cpdir2);
- 	} else {
--		out_be32(&par_io->cpdir1,
--			 ~pin_mask2bits & tmp_val);
-+		iowrite32be(~pin_mask2bits & tmp_val, &par_io->cpdir1);
- 		tmp_val &= ~pin_mask2bits;
--		out_be32(&par_io->cpdir1, new_mask2bits | tmp_val);
-+		iowrite32be(new_mask2bits | tmp_val, &par_io->cpdir1);
- 	}
- 	/* define pin assignment */
- 	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
--		in_be32(&par_io->cppar2) :
--		in_be32(&par_io->cppar1);
-+		ioread32be(&par_io->cppar2) :
-+		ioread32be(&par_io->cppar1);
- 
- 	new_mask2bits = (u32) (assignment << (QE_PIO_PINS -
- 			(pin % (QE_PIO_PINS / 2) + 1) * 2));
- 	/* clear and set 2 bits mask */
- 	if (pin > (QE_PIO_PINS / 2) - 1) {
--		out_be32(&par_io->cppar2,
--			 ~pin_mask2bits & tmp_val);
-+		iowrite32be(~pin_mask2bits & tmp_val, &par_io->cppar2);
- 		tmp_val &= ~pin_mask2bits;
--		out_be32(&par_io->cppar2, new_mask2bits | tmp_val);
-+		iowrite32be(new_mask2bits | tmp_val, &par_io->cppar2);
- 	} else {
--		out_be32(&par_io->cppar1,
--			 ~pin_mask2bits & tmp_val);
-+		iowrite32be(~pin_mask2bits & tmp_val, &par_io->cppar1);
- 		tmp_val &= ~pin_mask2bits;
--		out_be32(&par_io->cppar1, new_mask2bits | tmp_val);
-+		iowrite32be(new_mask2bits | tmp_val, &par_io->cppar1);
- 	}
- }
- EXPORT_SYMBOL(__par_io_config_pin);
-@@ -133,12 +127,12 @@ int par_io_data_set(u8 port, u8 pin, u8
- 	/* calculate pin location */
- 	pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin));
- 
--	tmp_val = in_be32(&par_io[port].cpdata);
-+	tmp_val = ioread32be(&par_io[port].cpdata);
- 
- 	if (val == 0)		/* clear */
--		out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val);
-+		iowrite32be(~pin_mask & tmp_val, &par_io[port].cpdata);
- 	else			/* set */
--		out_be32(&par_io[port].cpdata, pin_mask | tmp_val);
-+		iowrite32be(pin_mask | tmp_val, &par_io[port].cpdata);
- 
- 	return 0;
- }
---- a/drivers/soc/fsl/qe/qe_tdm.c
-+++ b/drivers/soc/fsl/qe/qe_tdm.c
-@@ -169,10 +169,10 @@ void ucc_tdm_init(struct ucc_tdm *utdm,
- 				    &siram[siram_entry_id * 32 + 0x200 +  i]);
- 	}
- 
--	setbits16(&siram[(siram_entry_id * 32) + (utdm->num_of_ts - 1)],
--		  SIR_LAST);
--	setbits16(&siram[(siram_entry_id * 32) + 0x200 + (utdm->num_of_ts - 1)],
--		  SIR_LAST);
-+	qe_setbits16(&siram[(siram_entry_id * 32) + (utdm->num_of_ts - 1)],
-+		     SIR_LAST);
-+	qe_setbits16(&siram[(siram_entry_id * 32) + 0x200 +
-+		     (utdm->num_of_ts - 1)], SIR_LAST);
- 
- 	/* Set SIxMR register */
- 	sixmr = SIMR_SAD(siram_entry_id);
---- a/drivers/soc/fsl/qe/ucc.c
-+++ b/drivers/soc/fsl/qe/ucc.c
-@@ -35,7 +35,7 @@ int ucc_set_qe_mux_mii_mng(unsigned int
- 		return -EINVAL;
- 
- 	spin_lock_irqsave(&cmxgcr_lock, flags);
--	clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
-+	qe_clrsetbits32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
- 		ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
- 	spin_unlock_irqrestore(&cmxgcr_lock, flags);
- 
-@@ -80,7 +80,7 @@ int ucc_set_type(unsigned int ucc_num, e
- 		return -EINVAL;
- 	}
- 
--	clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
-+	qe_clrsetbits8(guemr, UCC_GUEMR_MODE_MASK,
- 		UCC_GUEMR_SET_RESERVED3 | speed);
- 
- 	return 0;
-@@ -109,9 +109,9 @@ int ucc_mux_set_grant_tsa_bkpt(unsigned
- 	get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
- 
- 	if (set)
--		setbits32(cmxucr, mask << shift);
-+		qe_setbits32(cmxucr, mask << shift);
- 	else
--		clrbits32(cmxucr, mask << shift);
-+		qe_clrbits32(cmxucr, mask << shift);
- 
- 	return 0;
- }
-@@ -207,7 +207,7 @@ int ucc_set_qe_mux_rxtx(unsigned int ucc
- 	if (mode == COMM_DIR_RX)
- 		shift += 4;
- 
--	clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
-+	qe_clrsetbits32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
- 		clock_bits << shift);
- 
- 	return 0;
---- a/drivers/soc/fsl/qe/ucc_fast.c
-+++ b/drivers/soc/fsl/qe/ucc_fast.c
-@@ -29,41 +29,41 @@ void ucc_fast_dump_regs(struct ucc_fast_
- 	printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
- 
- 	printk(KERN_INFO "gumr  : addr=0x%p, val=0x%08x\n",
--		  &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
-+	       &uccf->uf_regs->gumr, ioread32be(&uccf->uf_regs->gumr));
- 	printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
--		  &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
-+		  &uccf->uf_regs->upsmr, ioread32be(&uccf->uf_regs->upsmr));
- 	printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
--		  &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
-+		  &uccf->uf_regs->utodr, ioread16be(&uccf->uf_regs->utodr));
- 	printk(KERN_INFO "udsr  : addr=0x%p, val=0x%04x\n",
--		  &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
-+		  &uccf->uf_regs->udsr, ioread16be(&uccf->uf_regs->udsr));
- 	printk(KERN_INFO "ucce  : addr=0x%p, val=0x%08x\n",
--		  &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
-+		  &uccf->uf_regs->ucce, ioread32be(&uccf->uf_regs->ucce));
- 	printk(KERN_INFO "uccm  : addr=0x%p, val=0x%08x\n",
--		  &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
-+		  &uccf->uf_regs->uccm, ioread32be(&uccf->uf_regs->uccm));
- 	printk(KERN_INFO "uccs  : addr=0x%p, val=0x%02x\n",
--		  &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
-+		  &uccf->uf_regs->uccs, ioread8(&uccf->uf_regs->uccs));
- 	printk(KERN_INFO "urfb  : addr=0x%p, val=0x%08x\n",
--		  &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
-+		  &uccf->uf_regs->urfb, ioread32be(&uccf->uf_regs->urfb));
- 	printk(KERN_INFO "urfs  : addr=0x%p, val=0x%04x\n",
--		  &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
-+		  &uccf->uf_regs->urfs, ioread16be(&uccf->uf_regs->urfs));
- 	printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
--		  &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
-+		  &uccf->uf_regs->urfet, ioread16be(&uccf->uf_regs->urfet));
- 	printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
--		  &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
-+		  &uccf->uf_regs->urfset, ioread16be(&uccf->uf_regs->urfset));
- 	printk(KERN_INFO "utfb  : addr=0x%p, val=0x%08x\n",
--		  &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
-+		  &uccf->uf_regs->utfb, ioread32be(&uccf->uf_regs->utfb));
- 	printk(KERN_INFO "utfs  : addr=0x%p, val=0x%04x\n",
--		  &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
-+		  &uccf->uf_regs->utfs, ioread16be(&uccf->uf_regs->utfs));
- 	printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
--		  &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
-+		  &uccf->uf_regs->utfet, ioread16be(&uccf->uf_regs->utfet));
- 	printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
--		  &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
-+		  &uccf->uf_regs->utftt, ioread16be(&uccf->uf_regs->utftt));
- 	printk(KERN_INFO "utpt  : addr=0x%p, val=0x%04x\n",
--		  &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
-+		  &uccf->uf_regs->utpt, ioread16be(&uccf->uf_regs->utpt));
- 	printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
--		  &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
-+		  &uccf->uf_regs->urtry, ioread32be(&uccf->uf_regs->urtry));
- 	printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
--		  &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
-+		  &uccf->uf_regs->guemr, ioread8(&uccf->uf_regs->guemr));
- }
- EXPORT_SYMBOL(ucc_fast_dump_regs);
- 
-@@ -85,7 +85,7 @@ EXPORT_SYMBOL(ucc_fast_get_qe_cr_subbloc
- 
- void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
- {
--	out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
-+	iowrite16be(UCC_FAST_TOD, &uccf->uf_regs->utodr);
- }
- EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
- 
-@@ -97,7 +97,7 @@ void ucc_fast_enable(struct ucc_fast_pri
- 	uf_regs = uccf->uf_regs;
- 
- 	/* Enable reception and/or transmission on this UCC. */
--	gumr = in_be32(&uf_regs->gumr);
-+	gumr = ioread32be(&uf_regs->gumr);
- 	if (mode & COMM_DIR_TX) {
- 		gumr |= UCC_FAST_GUMR_ENT;
- 		uccf->enabled_tx = 1;
-@@ -106,7 +106,7 @@ void ucc_fast_enable(struct ucc_fast_pri
- 		gumr |= UCC_FAST_GUMR_ENR;
- 		uccf->enabled_rx = 1;
- 	}
--	out_be32(&uf_regs->gumr, gumr);
-+	iowrite32be(gumr, &uf_regs->gumr);
- }
- EXPORT_SYMBOL(ucc_fast_enable);
- 
-@@ -118,7 +118,7 @@ void ucc_fast_disable(struct ucc_fast_pr
- 	uf_regs = uccf->uf_regs;
- 
- 	/* Disable reception and/or transmission on this UCC. */
--	gumr = in_be32(&uf_regs->gumr);
-+	gumr = ioread32be(&uf_regs->gumr);
- 	if (mode & COMM_DIR_TX) {
- 		gumr &= ~UCC_FAST_GUMR_ENT;
- 		uccf->enabled_tx = 0;
-@@ -127,7 +127,7 @@ void ucc_fast_disable(struct ucc_fast_pr
- 		gumr &= ~UCC_FAST_GUMR_ENR;
- 		uccf->enabled_rx = 0;
- 	}
--	out_be32(&uf_regs->gumr, gumr);
-+	iowrite32be(gumr, &uf_regs->gumr);
- }
- EXPORT_SYMBOL(ucc_fast_disable);
- 
-@@ -259,12 +259,13 @@ int ucc_fast_init(struct ucc_fast_info *
- 	gumr |= uf_info->tenc;
- 	gumr |= uf_info->tcrc;
- 	gumr |= uf_info->mode;
--	out_be32(&uf_regs->gumr, gumr);
-+	iowrite32be(gumr, &uf_regs->gumr);
- 
- 	/* Allocate memory for Tx Virtual Fifo */
- 	uccf->ucc_fast_tx_virtual_fifo_base_offset =
- 	    qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
--	if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
-+	if (IS_ERR_VALUE((unsigned long)uccf->
-+			 ucc_fast_tx_virtual_fifo_base_offset)) {
- 		printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
- 			__func__);
- 		uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
-@@ -277,7 +278,8 @@ int ucc_fast_init(struct ucc_fast_info *
- 		qe_muram_alloc(uf_info->urfs +
- 			   UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
- 			   UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
--	if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
-+	if (IS_ERR_VALUE((unsigned long)uccf->
-+			 ucc_fast_rx_virtual_fifo_base_offset)) {
- 		printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
- 			__func__);
- 		uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
-@@ -286,15 +288,15 @@ int ucc_fast_init(struct ucc_fast_info *
- 	}
- 
- 	/* Set Virtual Fifo registers */
--	out_be16(&uf_regs->urfs, uf_info->urfs);
--	out_be16(&uf_regs->urfet, uf_info->urfet);
--	out_be16(&uf_regs->urfset, uf_info->urfset);
--	out_be16(&uf_regs->utfs, uf_info->utfs);
--	out_be16(&uf_regs->utfet, uf_info->utfet);
--	out_be16(&uf_regs->utftt, uf_info->utftt);
-+	iowrite16be(uf_info->urfs, &uf_regs->urfs);
-+	iowrite16be(uf_info->urfet, &uf_regs->urfet);
-+	iowrite16be(uf_info->urfset, &uf_regs->urfset);
-+	iowrite16be(uf_info->utfs, &uf_regs->utfs);
-+	iowrite16be(uf_info->utfet, &uf_regs->utfet);
-+	iowrite16be(uf_info->utftt, &uf_regs->utftt);
- 	/* utfb, urfb are offsets from MURAM base */
--	out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
--	out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
-+	iowrite32be(uccf->ucc_fast_tx_virtual_fifo_base_offset, &uf_regs->utfb);
-+	iowrite32be(uccf->ucc_fast_rx_virtual_fifo_base_offset, &uf_regs->urfb);
- 
- 	/* Mux clocking */
- 	/* Grant Support */
-@@ -362,14 +364,14 @@ int ucc_fast_init(struct ucc_fast_info *
- 	}
- 
- 	/* Set interrupt mask register at UCC level. */
--	out_be32(&uf_regs->uccm, uf_info->uccm_mask);
-+	iowrite32be(uf_info->uccm_mask, &uf_regs->uccm);
- 
- 	/* First, clear anything pending at UCC level,
- 	 * otherwise, old garbage may come through
- 	 * as soon as the dam is opened. */
- 
- 	/* Writing '1' clears */
--	out_be32(&uf_regs->ucce, 0xffffffff);
-+	iowrite32be(0xffffffff, &uf_regs->ucce);
- 
- 	*uccf_ret = uccf;
- 	return 0;
---- a/drivers/tty/serial/ucc_uart.c
-+++ b/drivers/tty/serial/ucc_uart.c
-@@ -32,6 +32,7 @@
- #include <soc/fsl/qe/ucc_slow.h>
- 
- #include <linux/firmware.h>
-+#include <asm/cpm.h>
- #include <asm/reg.h>
- 
- /*
---- a/include/soc/fsl/qe/qe.h
-+++ b/include/soc/fsl/qe/qe.h
-@@ -17,7 +17,6 @@
- #include <linux/spinlock.h>
- #include <linux/errno.h>
- #include <linux/err.h>
--#include <asm/cpm.h>
- #include <soc/fsl/qe/immap_qe.h>
- #include <linux/of.h>
- #include <linux/of_address.h>
diff --git a/target/linux/layerscape/patches-5.4/814-qe-0006-config-qe-add-irq-qeic-support.patch b/target/linux/layerscape/patches-5.4/814-qe-0006-config-qe-add-irq-qeic-support.patch
deleted file mode 100644
index 5d8c35d04f..0000000000
--- a/target/linux/layerscape/patches-5.4/814-qe-0006-config-qe-add-irq-qeic-support.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 69673b5ab6f814cf679285f0c45baa318ab9e0d7 Mon Sep 17 00:00:00 2001
-From: Zhao Qiang <qiang.zhao@nxp.com>
-Date: Thu, 27 Apr 2017 10:22:12 +0800
-Subject: [PATCH] config/qe: add irq-qeic support.
-
-Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
----
- MAINTAINERS                            |  6 ++++++
- drivers/irqchip/Makefile               |  1 +
- drivers/net/ethernet/freescale/Kconfig | 11 ++++++-----
- 3 files changed, 13 insertions(+), 5 deletions(-)
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -6598,6 +6598,12 @@ F:	drivers/soc/fsl/qe/
- F:	include/soc/fsl/*qe*.h
- F:	include/soc/fsl/*ucc*.h
- 
-+FREESCALE QEIC DRIVERS
-+M:	Qiang Zhao <qiang.zhao@nxp.com>
-+L:	linux-kernel@vger.kernel.org
-+S:	Maintained
-+F:	drivers/irqchip/irq-qeic.c
-+
- FREESCALE QUICC ENGINE UCC ETHERNET DRIVER
- M:	Li Yang <leoyang.li@nxp.com>
- L:	netdev@vger.kernel.org
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -103,3 +103,4 @@ obj-$(CONFIG_MADERA_IRQ)		+= irq-madera.
- obj-$(CONFIG_LS1X_IRQ)			+= irq-ls1x.o
- obj-$(CONFIG_TI_SCI_INTR_IRQCHIP)	+= irq-ti-sci-intr.o
- obj-$(CONFIG_TI_SCI_INTA_IRQCHIP)	+= irq-ti-sci-inta.o
-+obj-$(CONFIG_QUICC_ENGINE)		+= irq-qeic.o
---- a/drivers/net/ethernet/freescale/Kconfig
-+++ b/drivers/net/ethernet/freescale/Kconfig
-@@ -6,10 +6,11 @@
- config NET_VENDOR_FREESCALE
- 	bool "Freescale devices"
- 	default y
--	depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
--		   M523x || M527x || M5272 || M528x || M520x || M532x || \
--		   ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM) || \
--		   ARCH_LAYERSCAPE || COMPILE_TEST
-+	depends on FSL_SOC || (QUICC_ENGINE && PPC32) || CPM1 || CPM2 || \
-+		   PPC_MPC512x || M523x || M527x || M5272 || M528x || M520x || \
-+		   M532x || ARCH_MXC || ARCH_MXS || \
-+		   (PPC_MPC52xx && PPC_BESTCOMM) || ARCH_LAYERSCAPE || \
-+		   COMPILE_TEST
- 	---help---
- 	  If you have a network (Ethernet) card belonging to this class, say Y.
- 
-@@ -74,7 +75,7 @@ config FSL_XGMAC_MDIO
- 
- config UCC_GETH
- 	tristate "Freescale QE Gigabit Ethernet"
--	depends on QUICC_ENGINE
-+	depends on QUICC_ENGINE && FSL_SOC && PPC32
- 	select FSL_PQ_MDIO
- 	select PHYLIB
- 	select FIXED_PHY
diff --git a/target/linux/layerscape/patches-5.4/815-sata-0001-ahci-qoriq-enable-acpi-support-in-qoriq-ahci-driver.patch b/target/linux/layerscape/patches-5.4/815-sata-0001-ahci-qoriq-enable-acpi-support-in-qoriq-ahci-driver.patch
deleted file mode 100644
index 74d75d0077..0000000000
--- a/target/linux/layerscape/patches-5.4/815-sata-0001-ahci-qoriq-enable-acpi-support-in-qoriq-ahci-driver.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 8f0baa717e7854b795567678415bc7173d66bc13 Mon Sep 17 00:00:00 2001
-From: Peng Ma <peng.ma@nxp.com>
-Date: Wed, 15 May 2019 05:45:35 +0000
-Subject: [PATCH] ahci: qoriq: enable acpi support in qoriq ahci driver
-
-This patch enables ACPI support in qoriq ahci driver.
-
-Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
-Signed-off-by: Peng Ma <peng.ma@nxp.com>
----
- drivers/ata/ahci_qoriq.c | 20 +++++++++++++++++---
- 1 file changed, 17 insertions(+), 3 deletions(-)
-
---- a/drivers/ata/ahci_qoriq.c
-+++ b/drivers/ata/ahci_qoriq.c
-@@ -6,6 +6,7 @@
-  *   Tang Yuantian <Yuantian.Tang@freescale.com>
-  */
- 
-+#include <linux/acpi.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/pm.h>
-@@ -80,6 +81,12 @@ static const struct of_device_id ahci_qo
- };
- MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match);
- 
-+static const struct acpi_device_id ahci_qoriq_acpi_match[] = {
-+	{"NXP0004", .driver_data = (kernel_ulong_t)AHCI_LX2160A},
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(acpi, ahci_qoriq_acpi_match);
-+
- static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class,
- 			  unsigned long deadline)
- {
-@@ -255,6 +262,7 @@ static int ahci_qoriq_phy_init(struct ah
- static int ahci_qoriq_probe(struct platform_device *pdev)
- {
- 	struct device_node *np = pdev->dev.of_node;
-+	const struct acpi_device_id *acpi_id;
- 	struct device *dev = &pdev->dev;
- 	struct ahci_host_priv *hpriv;
- 	struct ahci_qoriq_priv *qoriq_priv;
-@@ -267,14 +275,18 @@ static int ahci_qoriq_probe(struct platf
- 		return PTR_ERR(hpriv);
- 
- 	of_id = of_match_node(ahci_qoriq_of_match, np);
--	if (!of_id)
-+	acpi_id = acpi_match_device(ahci_qoriq_acpi_match, &pdev->dev);
-+	if (!(of_id || acpi_id))
- 		return -ENODEV;
- 
- 	qoriq_priv = devm_kzalloc(dev, sizeof(*qoriq_priv), GFP_KERNEL);
- 	if (!qoriq_priv)
- 		return -ENOMEM;
- 
--	qoriq_priv->type = (enum ahci_qoriq_type)of_id->data;
-+	if (of_id)
-+		qoriq_priv->type = (enum ahci_qoriq_type)of_id->data;
-+	else
-+		qoriq_priv->type = (enum ahci_qoriq_type)acpi_id->driver_data;
- 
- 	if (unlikely(!ecc_initialized)) {
- 		res = platform_get_resource_byname(pdev,
-@@ -288,7 +300,8 @@ static int ahci_qoriq_probe(struct platf
- 		}
- 	}
- 
--	qoriq_priv->is_dmacoherent = of_dma_is_coherent(np);
-+	if (device_get_dma_attr(&pdev->dev) == DEV_DMA_COHERENT)
-+		qoriq_priv->is_dmacoherent = true;
- 
- 	rc = ahci_platform_enable_resources(hpriv);
- 	if (rc)
-@@ -354,6 +367,7 @@ static struct platform_driver ahci_qoriq
- 	.driver = {
- 		.name = DRV_NAME,
- 		.of_match_table = ahci_qoriq_of_match,
-+		.acpi_match_table = ahci_qoriq_acpi_match,
- 		.pm = &ahci_qoriq_pm_ops,
- 	},
- };
diff --git a/target/linux/layerscape/patches-5.4/815-sata-0002-ahci-qoriq-workaround-for-errata-A-379364-on-lx2160a.patch b/target/linux/layerscape/patches-5.4/815-sata-0002-ahci-qoriq-workaround-for-errata-A-379364-on-lx2160a.patch
deleted file mode 100644
index ff5ae9ceee..0000000000
--- a/target/linux/layerscape/patches-5.4/815-sata-0002-ahci-qoriq-workaround-for-errata-A-379364-on-lx2160a.patch
+++ /dev/null
@@ -1,191 +0,0 @@
-From 73f7122003fca0d08142370e5b6c25783a7b43e9 Mon Sep 17 00:00:00 2001
-From: Peng Ma <peng.ma@nxp.com>
-Date: Wed, 15 May 2019 05:52:44 +0000
-Subject: [PATCH] ahci: qoriq: workaround for errata A-379364 on lx2160a
-
-There is a erratum on lx2160a which is: "SATA link is
-going down sometime during sata initialization"
-The workaround for it is to reset the lane. This patch
-implements this workaround.
-This erratum only exists on lx2160 Rev1, will be addressed
-on Rev2 and later.
-
-Signed-off-by: Peng Ma <peng.ma@nxp.com>
----
- drivers/ata/ahci_qoriq.c | 144 +++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 144 insertions(+)
-
---- a/drivers/ata/ahci_qoriq.c
-+++ b/drivers/ata/ahci_qoriq.c
-@@ -48,6 +48,27 @@
- #define ECC_DIS_ARMV8_CH2	0x80000000
- #define ECC_DIS_LS1088A		0x40000000
- 
-+/* errata for lx2160 */
-+#define RCWSR29_BASE			0x1E00170
-+#define SERDES2_BASE			0x1EB0000
-+#define DEVICE_CONFIG_REG_BASE		0x1E00000
-+#define SERDES2_LNAX_RX_CR(x)		(0x840 + (0x100 * (x)))
-+#define SERDES2_LNAX_RX_CBR(x)		(0x8C0 + (0x100 * (x)))
-+#define SYS_VER_REG			0xA4
-+#define LN_RX_RST			0x80000010
-+#define LN_RX_RST_DONE			0x3
-+#define LN_RX_MASK			0xf
-+#define LX2160A_VER1			0x1
-+
-+#define SERDES2_LNAA 0
-+#define SERDES2_LNAB 1
-+#define SERDES2_LNAC 2
-+#define SERDES2_LNAD 3
-+#define SERDES2_LNAE 4
-+#define SERDES2_LNAF 5
-+#define SERDES2_LNAG 6
-+#define SERDES2_LNAH 7
-+
- enum ahci_qoriq_type {
- 	AHCI_LS1021A,
- 	AHCI_LS1028A,
-@@ -87,6 +108,126 @@ static const struct acpi_device_id ahci_
- };
- MODULE_DEVICE_TABLE(acpi, ahci_qoriq_acpi_match);
- 
-+static void fsl_sata_errata_379364(bool select)
-+{
-+	int val = 0;
-+	void __iomem *rcw_base = NULL;
-+	void __iomem *serdes_base = NULL;
-+	void __iomem *dev_con_base = NULL;
-+
-+	if (select) {
-+		dev_con_base = ioremap(DEVICE_CONFIG_REG_BASE, PAGE_SIZE);
-+		if (!dev_con_base)
-+			return;
-+
-+		val = (readl(dev_con_base + SYS_VER_REG) & GENMASK(7, 4)) >> 4;
-+		if (val != LX2160A_VER1)
-+			goto dev_unmap;
-+
-+		/*
-+		 * Add few msec delay.
-+		 * Check for corresponding serdes lane RST_DONE .
-+		 * apply lane reset.
-+		 */
-+
-+		serdes_base = ioremap(SERDES2_BASE, PAGE_SIZE);
-+		if (!serdes_base)
-+			goto dev_unmap;
-+
-+		rcw_base = ioremap(RCWSR29_BASE, PAGE_SIZE);
-+		if (!rcw_base)
-+			goto serdes_unmap;
-+
-+		msleep(20);
-+
-+		val = (readl(rcw_base) & GENMASK(25, 21)) >> 21;
-+
-+		switch (val) {
-+		case 1:
-+			if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAC)) &
-+				LN_RX_MASK) != LN_RX_RST_DONE)
-+				writel(LN_RX_RST, serdes_base +
-+					SERDES2_LNAX_RX_CR(SERDES2_LNAC));
-+			if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAD)) &
-+				LN_RX_MASK) != LN_RX_RST_DONE)
-+				writel(LN_RX_RST, serdes_base +
-+					SERDES2_LNAX_RX_CR(SERDES2_LNAD));
-+			break;
-+
-+		case 4:
-+			if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAG)) &
-+				LN_RX_MASK) != LN_RX_RST_DONE)
-+				writel(LN_RX_RST, serdes_base +
-+					SERDES2_LNAX_RX_CR(SERDES2_LNAG));
-+			if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAH)) &
-+				LN_RX_MASK) != LN_RX_RST_DONE)
-+				writel(LN_RX_RST, serdes_base +
-+					SERDES2_LNAX_RX_CR(SERDES2_LNAH));
-+			break;
-+
-+		case 5:
-+			if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAE)) &
-+				LN_RX_MASK) != LN_RX_RST_DONE)
-+				writel(LN_RX_RST, serdes_base +
-+					SERDES2_LNAX_RX_CR(SERDES2_LNAE));
-+			if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAF)) &
-+				LN_RX_MASK) != LN_RX_RST_DONE)
-+				writel(LN_RX_RST, serdes_base +
-+					SERDES2_LNAX_RX_CR(SERDES2_LNAF));
-+			if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAG)) &
-+				LN_RX_MASK) != LN_RX_RST_DONE)
-+				writel(LN_RX_RST, serdes_base +
-+					SERDES2_LNAX_RX_CR(SERDES2_LNAG));
-+			if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAH)) &
-+				LN_RX_MASK) != LN_RX_RST_DONE)
-+				writel(LN_RX_RST, serdes_base +
-+					SERDES2_LNAX_RX_CR(SERDES2_LNAH));
-+			break;
-+
-+		case 8:
-+			if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAC)) &
-+				LN_RX_MASK) != LN_RX_RST_DONE)
-+				writel(LN_RX_RST, serdes_base +
-+					SERDES2_LNAX_RX_CR(SERDES2_LNAC));
-+			if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAD)) &
-+				LN_RX_MASK) != LN_RX_RST_DONE)
-+				writel(LN_RX_RST, serdes_base +
-+					SERDES2_LNAX_RX_CR(SERDES2_LNAD));
-+			if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAE)) &
-+				LN_RX_MASK) != LN_RX_RST_DONE)
-+				writel(LN_RX_RST, serdes_base +
-+					SERDES2_LNAX_RX_CR(SERDES2_LNAE));
-+			if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAF)) &
-+				LN_RX_MASK) != LN_RX_RST_DONE)
-+				writel(LN_RX_RST, serdes_base +
-+					SERDES2_LNAX_RX_CR(SERDES2_LNAF));
-+			break;
-+
-+		case 12:
-+			if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAG)) &
-+				LN_RX_MASK) != LN_RX_RST_DONE)
-+				writel(LN_RX_RST, serdes_base +
-+					SERDES2_LNAX_RX_CR(SERDES2_LNAG));
-+			if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAH)) &
-+				LN_RX_MASK) != LN_RX_RST_DONE)
-+				writel(LN_RX_RST, serdes_base +
-+					SERDES2_LNAX_RX_CR(SERDES2_LNAH));
-+			break;
-+
-+		default:
-+			break;
-+		}
-+	} else {
-+		return;
-+	}
-+
-+	iounmap(rcw_base);
-+serdes_unmap:
-+	iounmap(serdes_base);
-+dev_unmap:
-+	iounmap(dev_con_base);
-+}
-+
- static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class,
- 			  unsigned long deadline)
- {
-@@ -102,6 +243,7 @@ static int ahci_qoriq_hardreset(struct a
- 	bool online;
- 	int rc;
- 	bool ls1021a_workaround = (qoriq_priv->type == AHCI_LS1021A);
-+	bool lx2160a_workaround = (qoriq_priv->type == AHCI_LX2160A);
- 
- 	DPRINTK("ENTER\n");
- 
-@@ -128,6 +270,8 @@ static int ahci_qoriq_hardreset(struct a
- 	tf.command = ATA_BUSY;
- 	ata_tf_to_fis(&tf, 0, 0, d2h_fis);
- 
-+	fsl_sata_errata_379364(lx2160a_workaround);
-+
- 	rc = sata_link_hardreset(link, timing, deadline, &online,
- 				 ahci_check_ready);
- 
diff --git a/target/linux/layerscape/patches-5.4/815-sata-0003-ahci_qoriq-bug-fix-for-ecc_addr.patch b/target/linux/layerscape/patches-5.4/815-sata-0003-ahci_qoriq-bug-fix-for-ecc_addr.patch
deleted file mode 100644
index ab9cc8c79d..0000000000
--- a/target/linux/layerscape/patches-5.4/815-sata-0003-ahci_qoriq-bug-fix-for-ecc_addr.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From a148b8623b7d97c87857f9e203bad538ebd837f0 Mon Sep 17 00:00:00 2001
-From: Udit Kumar <udit.kumar@nxp.com>
-Date: Wed, 12 Jun 2019 10:42:02 +0530
-Subject: [PATCH] ahci_qoriq: bug fix for ecc_addr
-
-Original driver expect a register node with name "sata-ecc"
-this node is of 64 bit wide.
-In ACPI such nodes can be provided with QWordMemory, but
-QWordMemory can not hold DescriptorName more than 4 characters.
-
-Therefore this patch changes platform property retrival based
-upon index instead of named.
-
-Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
----
- drivers/ata/ahci_qoriq.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/ata/ahci_qoriq.c
-+++ b/drivers/ata/ahci_qoriq.c
-@@ -433,9 +433,7 @@ static int ahci_qoriq_probe(struct platf
- 		qoriq_priv->type = (enum ahci_qoriq_type)acpi_id->driver_data;
- 
- 	if (unlikely(!ecc_initialized)) {
--		res = platform_get_resource_byname(pdev,
--						   IORESOURCE_MEM,
--						   "sata-ecc");
-+		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- 		if (res) {
- 			qoriq_priv->ecc_addr =
- 				devm_ioremap_resource(dev, res);
diff --git a/target/linux/layerscape/patches-5.4/816-sdhc-0001-mmc-sdhci-of-esdhc-poll-ESDHC_FLUSH_ASYNC_FIFO-bit-u.patch b/target/linux/layerscape/patches-5.4/816-sdhc-0001-mmc-sdhci-of-esdhc-poll-ESDHC_FLUSH_ASYNC_FIFO-bit-u.patch
deleted file mode 100644
index 085de51c14..0000000000
--- a/target/linux/layerscape/patches-5.4/816-sdhc-0001-mmc-sdhci-of-esdhc-poll-ESDHC_FLUSH_ASYNC_FIFO-bit-u.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From 0f5cf5dcc3ca4f8e610ebe1e62e3d3546b9d09ca Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Mon, 16 Sep 2019 19:17:44 +0800
-Subject: [PATCH] mmc: sdhci-of-esdhc: poll ESDHC_FLUSH_ASYNC_FIFO bit until
- completion
-
-The ESDHC_FLUSH_ASYNC_FIFO bit which is set to flush asynchronous FIFO
-should be polled until it's auto cleared by hardware.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/mmc/host/sdhci-of-esdhc.c | 35 ++++++++++++++++++++++++++++-------
- 1 file changed, 28 insertions(+), 7 deletions(-)
-
---- a/drivers/mmc/host/sdhci-of-esdhc.c
-+++ b/drivers/mmc/host/sdhci-of-esdhc.c
-@@ -592,6 +592,32 @@ static void esdhc_clock_enable(struct sd
- 	}
- }
- 
-+static void esdhc_flush_async_fifo(struct sdhci_host *host)
-+{
-+	ktime_t timeout;
-+	u32 val;
-+
-+	val = sdhci_readl(host, ESDHC_DMA_SYSCTL);
-+	val |= ESDHC_FLUSH_ASYNC_FIFO;
-+	sdhci_writel(host, val, ESDHC_DMA_SYSCTL);
-+
-+	/* Wait max 20 ms */
-+	timeout = ktime_add_ms(ktime_get(), 20);
-+	while (1) {
-+		bool timedout = ktime_after(ktime_get(), timeout);
-+
-+		if (!(sdhci_readl(host, ESDHC_DMA_SYSCTL) &
-+		      ESDHC_FLUSH_ASYNC_FIFO))
-+			break;
-+		if (timedout) {
-+			pr_err("%s: flushing asynchronous FIFO timeout.\n",
-+				mmc_hostname(host->mmc));
-+			break;
-+		}
-+		usleep_range(10, 20);
-+	}
-+}
-+
- static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
- {
- 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-@@ -684,9 +710,7 @@ static void esdhc_of_set_clock(struct sd
- 		sdhci_writel(host, temp | ESDHC_HS400_WNDW_ADJUST, ESDHC_TBCTL);
- 
- 		esdhc_clock_enable(host, false);
--		temp = sdhci_readl(host, ESDHC_DMA_SYSCTL);
--		temp |= ESDHC_FLUSH_ASYNC_FIFO;
--		sdhci_writel(host, temp, ESDHC_DMA_SYSCTL);
-+		esdhc_flush_async_fifo(host);
- 	}
- 
- 	/* Wait max 20 ms */
-@@ -888,10 +912,7 @@ static void esdhc_tuning_block_enable(st
- 	u32 val;
- 
- 	esdhc_clock_enable(host, false);
--
--	val = sdhci_readl(host, ESDHC_DMA_SYSCTL);
--	val |= ESDHC_FLUSH_ASYNC_FIFO;
--	sdhci_writel(host, val, ESDHC_DMA_SYSCTL);
-+	esdhc_flush_async_fifo(host);
- 
- 	val = sdhci_readl(host, ESDHC_TBCTL);
- 	if (enable)
diff --git a/target/linux/layerscape/patches-5.4/816-sdhc-0002-LF-605-mmc-sdhci-of-esdhc-convert-to-use-esdhc_tunin.patch b/target/linux/layerscape/patches-5.4/816-sdhc-0002-LF-605-mmc-sdhci-of-esdhc-convert-to-use-esdhc_tunin.patch
deleted file mode 100644
index df19568863..0000000000
--- a/target/linux/layerscape/patches-5.4/816-sdhc-0002-LF-605-mmc-sdhci-of-esdhc-convert-to-use-esdhc_tunin.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From e95c04bd6d9ebe081126184fb228461b1b3fa7aa Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Thu, 12 Dec 2019 15:52:18 +0800
-Subject: [PATCH] LF-605 mmc: sdhci-of-esdhc: convert to use
- esdhc_tuning_window_ptr()
-
-Convert to use a new function esdhc_tuning_window_ptr() to
-get tuning window start point and end point.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
-Acked-by: Adrian Hunter <adrian.hunter@intel.com>
----
- drivers/mmc/host/sdhci-of-esdhc.c | 34 +++++++++++++++++++++-------------
- 1 file changed, 21 insertions(+), 13 deletions(-)
-
---- a/drivers/mmc/host/sdhci-of-esdhc.c
-+++ b/drivers/mmc/host/sdhci-of-esdhc.c
-@@ -924,20 +924,11 @@ static void esdhc_tuning_block_enable(st
- 	esdhc_clock_enable(host, true);
- }
- 
--static void esdhc_prepare_sw_tuning(struct sdhci_host *host, u8 *window_start,
-+static void esdhc_tuning_window_ptr(struct sdhci_host *host, u8 *window_start,
- 				    u8 *window_end)
- {
--	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
--	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
--	u8 tbstat_15_8, tbstat_7_0;
- 	u32 val;
- 
--	if (esdhc->quirk_tuning_erratum_type1) {
--		*window_start = 5 * esdhc->div_ratio;
--		*window_end = 3 * esdhc->div_ratio;
--		return;
--	}
--
- 	/* Write TBCTL[11:8]=4'h8 */
- 	val = sdhci_readl(host, ESDHC_TBCTL);
- 	val &= ~(0xf << 8);
-@@ -956,6 +947,25 @@ static void esdhc_prepare_sw_tuning(stru
- 	val = sdhci_readl(host, ESDHC_TBSTAT);
- 	val = sdhci_readl(host, ESDHC_TBSTAT);
- 
-+	*window_end = val & 0xff;
-+	*window_start = (val >> 8) & 0xff;
-+}
-+
-+static void esdhc_prepare_sw_tuning(struct sdhci_host *host, u8 *window_start,
-+				    u8 *window_end)
-+{
-+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-+	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
-+	u8 start_ptr, end_ptr;
-+
-+	if (esdhc->quirk_tuning_erratum_type1) {
-+		*window_start = 5 * esdhc->div_ratio;
-+		*window_end = 3 * esdhc->div_ratio;
-+		return;
-+	}
-+
-+	esdhc_tuning_window_ptr(host, &start_ptr, &end_ptr);
-+
- 	/* Reset data lines by setting ESDHCCTL[RSTD] */
- 	sdhci_reset(host, SDHCI_RESET_DATA);
- 	/* Write 32'hFFFF_FFFF to IRQSTAT register */
-@@ -966,10 +976,8 @@ static void esdhc_prepare_sw_tuning(stru
- 	 * then program TBPTR[TB_WNDW_END_PTR] = 4 * div_ratio
- 	 * and program TBPTR[TB_WNDW_START_PTR] = 8 * div_ratio.
- 	 */
--	tbstat_7_0 = val & 0xff;
--	tbstat_15_8 = (val >> 8) & 0xff;
- 
--	if (abs(tbstat_15_8 - tbstat_7_0) > (4 * esdhc->div_ratio)) {
-+	if (abs(start_ptr - end_ptr) > (4 * esdhc->div_ratio)) {
- 		*window_start = 8 * esdhc->div_ratio;
- 		*window_end = 4 * esdhc->div_ratio;
- 	} else {
diff --git a/target/linux/layerscape/patches-5.4/816-sdhc-0003-LF-605-mmc-sdhci-of-esdhc-update-tuning-erratum-A-00.patch b/target/linux/layerscape/patches-5.4/816-sdhc-0003-LF-605-mmc-sdhci-of-esdhc-update-tuning-erratum-A-00.patch
deleted file mode 100644
index 4a16dbd505..0000000000
--- a/target/linux/layerscape/patches-5.4/816-sdhc-0003-LF-605-mmc-sdhci-of-esdhc-update-tuning-erratum-A-00.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From f3d460fb85677a5f62324771e5715ceb11726ecc Mon Sep 17 00:00:00 2001
-From: Yangbo Lu <yangbo.lu@nxp.com>
-Date: Thu, 12 Dec 2019 15:52:19 +0800
-Subject: [PATCH] LF-605 mmc: sdhci-of-esdhc: update tuning erratum A-008171
-
-There is an official update for eSDHC tuning erratum A-008171.
-This patch is to implement the changes,
-- Affect all revisions of SoC.
-- Changes for tuning window checking.
-- Hardware hits a new condition that tuning succeeds although
-  the eSDHC might not have tuned properly for type2 SoCs
-  (soc_tuning_erratum_type2[] array in driver). So check
-  tuning window after tuning succeeds.
-
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
-Acked-by: Adrian Hunter <adrian.hunter@intel.com>
----
- drivers/mmc/host/sdhci-of-esdhc.c | 39 ++++++++++++++++++++++++++-------------
- 1 file changed, 26 insertions(+), 13 deletions(-)
-
---- a/drivers/mmc/host/sdhci-of-esdhc.c
-+++ b/drivers/mmc/host/sdhci-of-esdhc.c
-@@ -890,20 +890,20 @@ static int esdhc_signal_voltage_switch(s
- }
- 
- static struct soc_device_attribute soc_tuning_erratum_type1[] = {
--	{ .family = "QorIQ T1023", .revision = "1.0", },
--	{ .family = "QorIQ T1040", .revision = "1.0", },
--	{ .family = "QorIQ T2080", .revision = "1.0", },
--	{ .family = "QorIQ LS1021A", .revision = "1.0", },
-+	{ .family = "QorIQ T1023", },
-+	{ .family = "QorIQ T1040", },
-+	{ .family = "QorIQ T2080", },
-+	{ .family = "QorIQ LS1021A", },
- 	{ },
- };
- 
- static struct soc_device_attribute soc_tuning_erratum_type2[] = {
--	{ .family = "QorIQ LS1012A", .revision = "1.0", },
--	{ .family = "QorIQ LS1043A", .revision = "1.*", },
--	{ .family = "QorIQ LS1046A", .revision = "1.0", },
--	{ .family = "QorIQ LS1080A", .revision = "1.0", },
--	{ .family = "QorIQ LS2080A", .revision = "1.0", },
--	{ .family = "QorIQ LA1575A", .revision = "1.0", },
-+	{ .family = "QorIQ LS1012A", },
-+	{ .family = "QorIQ LS1043A", },
-+	{ .family = "QorIQ LS1046A", },
-+	{ .family = "QorIQ LS1080A", },
-+	{ .family = "QorIQ LS2080A", },
-+	{ .family = "QorIQ LA1575A", },
- 	{ },
- };
- 
-@@ -971,13 +971,13 @@ static void esdhc_prepare_sw_tuning(stru
- 	/* Write 32'hFFFF_FFFF to IRQSTAT register */
- 	sdhci_writel(host, 0xFFFFFFFF, SDHCI_INT_STATUS);
- 
--	/* If TBSTAT[15:8]-TBSTAT[7:0] > 4 * div_ratio
--	 * or TBSTAT[7:0]-TBSTAT[15:8] > 4 * div_ratio,
-+	/* If TBSTAT[15:8]-TBSTAT[7:0] > (4 * div_ratio) + 2
-+	 * or TBSTAT[7:0]-TBSTAT[15:8] > (4 * div_ratio) + 2,
- 	 * then program TBPTR[TB_WNDW_END_PTR] = 4 * div_ratio
- 	 * and program TBPTR[TB_WNDW_START_PTR] = 8 * div_ratio.
- 	 */
- 
--	if (abs(start_ptr - end_ptr) > (4 * esdhc->div_ratio)) {
-+	if (abs(start_ptr - end_ptr) > (4 * esdhc->div_ratio + 2)) {
- 		*window_start = 8 * esdhc->div_ratio;
- 		*window_end = 4 * esdhc->div_ratio;
- 	} else {
-@@ -1061,6 +1061,19 @@ static int esdhc_execute_tuning(struct m
- 		if (ret)
- 			break;
- 
-+		/* For type2 affected platforms of the tuning erratum,
-+		 * tuning may succeed although eSDHC might not have
-+		 * tuned properly. Need to check tuning window.
-+		 */
-+		if (esdhc->quirk_tuning_erratum_type2 &&
-+		    !host->tuning_err) {
-+			esdhc_tuning_window_ptr(host, &window_start,
-+						&window_end);
-+			if (abs(window_start - window_end) >
-+			    (4 * esdhc->div_ratio + 2))
-+				host->tuning_err = -EAGAIN;
-+		}
-+
- 		/* If HW tuning fails and triggers erratum,
- 		 * try workaround.
- 		 */
diff --git a/target/linux/layerscape/patches-5.4/817-spi-0001-spi-spi-fsl-qspi-dynamically-alloc-AHB-memory-for-QS.patch b/target/linux/layerscape/patches-5.4/817-spi-0001-spi-spi-fsl-qspi-dynamically-alloc-AHB-memory-for-QS.patch
deleted file mode 100644
index 97c8eab118..0000000000
--- a/target/linux/layerscape/patches-5.4/817-spi-0001-spi-spi-fsl-qspi-dynamically-alloc-AHB-memory-for-QS.patch
+++ /dev/null
@@ -1,139 +0,0 @@
-From e1cf48a13626d0c42c5191dc4852f4dc271de010 Mon Sep 17 00:00:00 2001
-From: Han Xu <han.xu@nxp.com>
-Date: Tue, 9 Jul 2019 16:21:14 -0500
-Subject: [PATCH] spi: spi-fsl-qspi: dynamically alloc AHB memory for QSPI
-
-dynamically alloc AHB memory for QSPI controller.
-
-Signed-off-by: Han Xu <han.xu@nxp.com>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/spi/spi-fsl-qspi.c | 60 +++++++++++++++++++++++++++++++++-------------
- 1 file changed, 43 insertions(+), 17 deletions(-)
-
---- a/drivers/spi/spi-fsl-qspi.c
-+++ b/drivers/spi/spi-fsl-qspi.c
-@@ -192,6 +192,8 @@
-  */
- #define QUADSPI_QUIRK_USE_TDH_SETTING	BIT(5)
- 
-+#define QUADSPI_MIN_IOMAP		SZ_4M
-+
- struct fsl_qspi_devtype_data {
- 	unsigned int rxfifo;
- 	unsigned int txfifo;
-@@ -254,6 +256,9 @@ struct fsl_qspi {
- 	void __iomem *iobase;
- 	void __iomem *ahb_addr;
- 	u32 memmap_phy;
-+	u32 memmap_phy_size;
-+	u32 memmap_start;
-+	u32 memmap_len;
- 	struct clk *clk, *clk_en;
- 	struct device *dev;
- 	struct completion c;
-@@ -537,11 +542,34 @@ static void fsl_qspi_select_mem(struct f
- 	fsl_qspi_invalidate(q);
- }
- 
--static void fsl_qspi_read_ahb(struct fsl_qspi *q, const struct spi_mem_op *op)
-+static int fsl_qspi_read_ahb(struct fsl_qspi *q, const struct spi_mem_op *op)
- {
-+	u32 start = op->addr.val + q->selected * q->memmap_phy_size / 4;
-+	u32 len = op->data.nbytes;
-+
-+	/* if necessary, ioremap before AHB read */
-+	if ((!q->ahb_addr) || start < q->memmap_start ||
-+	    start + len > q->memmap_start + q->memmap_len) {
-+		if (q->ahb_addr) {
-+			iounmap(q->ahb_addr);
-+		}
-+
-+		q->memmap_start = start;
-+		q->memmap_len = len > QUADSPI_MIN_IOMAP ?
-+				len : QUADSPI_MIN_IOMAP;
-+
-+		q->ahb_addr = ioremap_wc(q->memmap_phy + q->memmap_start,
-+					 q->memmap_len);
-+		if (!q->ahb_addr) {
-+			dev_err(q->dev, "failed to alloc memory\n");
-+			return -ENOMEM;
-+		}
-+	}
-+
- 	memcpy_fromio(op->data.buf.in,
--		      q->ahb_addr + q->selected * q->devtype_data->ahb_buf_size,
--		      op->data.nbytes);
-+		      q->ahb_addr + start - q->memmap_start, len);
-+
-+	return 0;
- }
- 
- static void fsl_qspi_fill_txfifo(struct fsl_qspi *q,
-@@ -646,7 +674,7 @@ static int fsl_qspi_exec_op(struct spi_m
- 		addr_offset = q->memmap_phy;
- 
- 	qspi_writel(q,
--		    q->selected * q->devtype_data->ahb_buf_size + addr_offset,
-+		    q->selected * q->memmap_phy_size / 4 + addr_offset,
- 		    base + QUADSPI_SFAR);
- 
- 	qspi_writel(q, qspi_readl(q, base + QUADSPI_MCR) |
-@@ -665,7 +693,7 @@ static int fsl_qspi_exec_op(struct spi_m
- 	 */
- 	if (op->data.nbytes > (q->devtype_data->rxfifo - 4) &&
- 	    op->data.dir == SPI_MEM_DATA_IN) {
--		fsl_qspi_read_ahb(q, op);
-+		err = fsl_qspi_read_ahb(q, op);
- 	} else {
- 		qspi_writel(q, QUADSPI_RBCT_WMRK_MASK |
- 			    QUADSPI_RBCT_RXBRD_USEIPS, base + QUADSPI_RBCT);
-@@ -763,16 +791,16 @@ static int fsl_qspi_default_setup(struct
- 	 * In HW there can be a maximum of four chips on two buses with
- 	 * two chip selects on each bus. We use four chip selects in SW
- 	 * to differentiate between the four chips.
--	 * We use ahb_buf_size for each chip and set SFA1AD, SFA2AD, SFB1AD,
--	 * SFB2AD accordingly.
-+	 * We divide the total memory region size equally for each chip
-+	 * and set SFA1AD, SFA2AD, SFB1AD, SFB2AD accordingly.
- 	 */
--	qspi_writel(q, q->devtype_data->ahb_buf_size + addr_offset,
-+	qspi_writel(q, q->memmap_phy_size / 4 + addr_offset,
- 		    base + QUADSPI_SFA1AD);
--	qspi_writel(q, q->devtype_data->ahb_buf_size * 2 + addr_offset,
-+	qspi_writel(q, q->memmap_phy_size / 4 * 2 + addr_offset,
- 		    base + QUADSPI_SFA2AD);
--	qspi_writel(q, q->devtype_data->ahb_buf_size * 3 + addr_offset,
-+	qspi_writel(q, q->memmap_phy_size / 4 * 3 + addr_offset,
- 		    base + QUADSPI_SFB1AD);
--	qspi_writel(q, q->devtype_data->ahb_buf_size * 4 + addr_offset,
-+	qspi_writel(q, q->memmap_phy_size / 4 * 4 + addr_offset,
- 		    base + QUADSPI_SFB2AD);
- 
- 	q->selected = -1;
-@@ -859,13 +887,8 @@ static int fsl_qspi_probe(struct platfor
- 
- 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- 					"QuadSPI-memory");
--	q->ahb_addr = devm_ioremap_resource(dev, res);
--	if (IS_ERR(q->ahb_addr)) {
--		ret = PTR_ERR(q->ahb_addr);
--		goto err_put_ctrl;
--	}
--
- 	q->memmap_phy = res->start;
-+	q->memmap_phy_size = resource_size(res);
- 
- 	/* find the clocks */
- 	q->clk_en = devm_clk_get(dev, "qspi_en");
-@@ -939,6 +962,9 @@ static int fsl_qspi_remove(struct platfo
- 
- 	mutex_destroy(&q->lock);
- 
-+	if (q->ahb_addr)
-+		iounmap(q->ahb_addr);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/817-spi-0002-spi-spi-fsl-qspi-Introduce-variable-to-fix-different.patch b/target/linux/layerscape/patches-5.4/817-spi-0002-spi-spi-fsl-qspi-Introduce-variable-to-fix-different.patch
deleted file mode 100644
index 2afc651a40..0000000000
--- a/target/linux/layerscape/patches-5.4/817-spi-0002-spi-spi-fsl-qspi-Introduce-variable-to-fix-different.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From be9165b9fdcf2a18ee201ffdaf8d69801387eb91 Mon Sep 17 00:00:00 2001
-From: Kuldeep Singh <kuldeep.singh@nxp.com>
-Date: Tue, 18 Feb 2020 10:42:50 +0800
-Subject: [PATCH] spi: spi-fsl-qspi: Introduce variable to fix different
- invalid master Id
-
-Different platforms have different Master with different SourceID on
-AHB bus. The 0X0E Master ID is used by cluster 3 in case of LS2088A.
-So, patch introduce an invalid master id variable to fix invalid
-mastered on different platforms.
-
-Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
-Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/spi/spi-fsl-qspi.c | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/drivers/spi/spi-fsl-qspi.c
-+++ b/drivers/spi/spi-fsl-qspi.c
-@@ -68,6 +68,11 @@
- #define QUADSPI_FLSHCR_TCSH_MASK	GENMASK(11, 8)
- #define QUADSPI_FLSHCR_TDH_MASK		GENMASK(17, 16)
- 
-+#define QUADSPI_BUF0CR                  0x10
-+#define QUADSPI_BUF1CR                  0x14
-+#define QUADSPI_BUF2CR                  0x18
-+#define QUADSPI_BUFXCR_INVALID_MSTRID   0xe
-+
- #define QUADSPI_BUF3CR			0x1c
- #define QUADSPI_BUF3CR_ALLMST_MASK	BIT(31)
- #define QUADSPI_BUF3CR_ADATSZ(x)	((x) << 8)
-@@ -197,6 +202,7 @@
- struct fsl_qspi_devtype_data {
- 	unsigned int rxfifo;
- 	unsigned int txfifo;
-+	int invalid_mstrid;
- 	unsigned int ahb_buf_size;
- 	unsigned int quirks;
- 	bool little_endian;
-@@ -205,6 +211,7 @@ struct fsl_qspi_devtype_data {
- static const struct fsl_qspi_devtype_data vybrid_data = {
- 	.rxfifo = SZ_128,
- 	.txfifo = SZ_64,
-+	.invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
- 	.ahb_buf_size = SZ_1K,
- 	.quirks = QUADSPI_QUIRK_SWAP_ENDIAN,
- 	.little_endian = true,
-@@ -213,6 +220,7 @@ static const struct fsl_qspi_devtype_dat
- static const struct fsl_qspi_devtype_data imx6sx_data = {
- 	.rxfifo = SZ_128,
- 	.txfifo = SZ_512,
-+	.invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
- 	.ahb_buf_size = SZ_1K,
- 	.quirks = QUADSPI_QUIRK_4X_INT_CLK | QUADSPI_QUIRK_TKT245618,
- 	.little_endian = true,
-@@ -221,6 +229,7 @@ static const struct fsl_qspi_devtype_dat
- static const struct fsl_qspi_devtype_data imx7d_data = {
- 	.rxfifo = SZ_128,
- 	.txfifo = SZ_512,
-+	.invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
- 	.ahb_buf_size = SZ_1K,
- 	.quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK |
- 		  QUADSPI_QUIRK_USE_TDH_SETTING,
-@@ -230,6 +239,7 @@ static const struct fsl_qspi_devtype_dat
- static const struct fsl_qspi_devtype_data imx6ul_data = {
- 	.rxfifo = SZ_128,
- 	.txfifo = SZ_512,
-+	.invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
- 	.ahb_buf_size = SZ_1K,
- 	.quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK |
- 		  QUADSPI_QUIRK_USE_TDH_SETTING,
-@@ -239,6 +249,7 @@ static const struct fsl_qspi_devtype_dat
- static const struct fsl_qspi_devtype_data ls1021a_data = {
- 	.rxfifo = SZ_128,
- 	.txfifo = SZ_64,
-+	.invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
- 	.ahb_buf_size = SZ_1K,
- 	.quirks = 0,
- 	.little_endian = false,
-@@ -248,6 +259,7 @@ static const struct fsl_qspi_devtype_dat
- 	.rxfifo = SZ_128,
- 	.txfifo = SZ_64,
- 	.ahb_buf_size = SZ_1K,
-+	.invalid_mstrid = 0x0,
- 	.quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_BASE_INTERNAL,
- 	.little_endian = true,
- };
-@@ -661,6 +673,7 @@ static int fsl_qspi_exec_op(struct spi_m
- 	void __iomem *base = q->iobase;
- 	u32 addr_offset = 0;
- 	int err = 0;
-+	int invalid_mstrid = q->devtype_data->invalid_mstrid;
- 
- 	mutex_lock(&q->lock);
- 
-@@ -684,6 +697,10 @@ static int fsl_qspi_exec_op(struct spi_m
- 	qspi_writel(q, QUADSPI_SPTRCLR_BFPTRC | QUADSPI_SPTRCLR_IPPTRC,
- 		    base + QUADSPI_SPTRCLR);
- 
-+	qspi_writel(q, invalid_mstrid, base + QUADSPI_BUF0CR);
-+	qspi_writel(q, invalid_mstrid, base + QUADSPI_BUF1CR);
-+	qspi_writel(q, invalid_mstrid, base + QUADSPI_BUF2CR);
-+
- 	fsl_qspi_prepare_lut(q, op);
- 
- 	/*
diff --git a/target/linux/layerscape/patches-5.4/817-spi-0003-MLK-21960-1-spi-fspi-enable-fspi-on-imx8qxp-and-imx8.patch b/target/linux/layerscape/patches-5.4/817-spi-0003-MLK-21960-1-spi-fspi-enable-fspi-on-imx8qxp-and-imx8.patch
deleted file mode 100644
index 02562b7587..0000000000
--- a/target/linux/layerscape/patches-5.4/817-spi-0003-MLK-21960-1-spi-fspi-enable-fspi-on-imx8qxp-and-imx8.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 13f63bc4a1a08aaed6d64ea9c6b0bec02be225ce Mon Sep 17 00:00:00 2001
-From: Han Xu <han.xu@nxp.com>
-Date: Wed, 5 Jun 2019 16:43:08 -0500
-Subject: [PATCH] MLK-21960-1: spi: fspi: enable fspi on imx8qxp and imx8mm
-
-enable fspi on imx8qxp and imx8mm
-
-Signed-off-by: Han Xu <han.xu@nxp.com>
----
- drivers/spi/spi-nxp-fspi.c | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/drivers/spi/spi-nxp-fspi.c
-+++ b/drivers/spi/spi-nxp-fspi.c
-@@ -324,6 +324,22 @@ static const struct nxp_fspi_devtype_dat
- 	.little_endian = true,  /* little-endian    */
- };
- 
-+static const struct nxp_fspi_devtype_data imx8mm_data = {
-+	.rxfifo = SZ_512,       /* (64  * 64 bits)  */
-+	.txfifo = SZ_1K,        /* (128 * 64 bits)  */
-+	.ahb_buf_size = SZ_2K,  /* (256 * 64 bits)  */
-+	.quirks = 0,
-+	.little_endian = true,  /* little-endian    */
-+};
-+
-+static const struct nxp_fspi_devtype_data imx8qxp_data = {
-+	.rxfifo = SZ_512,       /* (64  * 64 bits)  */
-+	.txfifo = SZ_1K,        /* (128 * 64 bits)  */
-+	.ahb_buf_size = SZ_2K,  /* (256 * 64 bits)  */
-+	.quirks = 0,
-+	.little_endian = true,  /* little-endian    */
-+};
-+
- struct nxp_fspi {
- 	void __iomem *iobase;
- 	void __iomem *ahb_addr;
-@@ -1082,6 +1098,8 @@ static int nxp_fspi_resume(struct device
- 
- static const struct of_device_id nxp_fspi_dt_ids[] = {
- 	{ .compatible = "nxp,lx2160a-fspi", .data = (void *)&lx2160a_data, },
-+	{ .compatible = "nxp,imx8mm-fspi", .data = (void *)&imx8mm_data, },
-+	{ .compatible = "nxp,imx8qxp-fspi", .data = (void *)&imx8qxp_data, },
- 	{ /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, nxp_fspi_dt_ids);
diff --git a/target/linux/layerscape/patches-5.4/817-spi-0004-MLK-21960-2-spi-fspi-dynamically-alloc-AHB-memory.patch b/target/linux/layerscape/patches-5.4/817-spi-0004-MLK-21960-2-spi-fspi-dynamically-alloc-AHB-memory.patch
deleted file mode 100644
index 534c014a2b..0000000000
--- a/target/linux/layerscape/patches-5.4/817-spi-0004-MLK-21960-2-spi-fspi-dynamically-alloc-AHB-memory.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 6e46fe6d9428a41543bd19644de3c9f2611b73bf Mon Sep 17 00:00:00 2001
-From: Han Xu <han.xu@nxp.com>
-Date: Wed, 5 Jun 2019 16:43:30 -0500
-Subject: [PATCH] MLK-21960-2: spi: fspi: dynamically alloc AHB memory
-
-dynamically allocate AHB memory as needed.
-
-Signed-off-by: Han Xu <han.xu@nxp.com>
----
- drivers/spi/spi-nxp-fspi.c | 40 ++++++++++++++++++++++++++++++++++------
- 1 file changed, 34 insertions(+), 6 deletions(-)
-
---- a/drivers/spi/spi-nxp-fspi.c
-+++ b/drivers/spi/spi-nxp-fspi.c
-@@ -307,6 +307,7 @@
- 
- #define POLL_TOUT		5000
- #define NXP_FSPI_MAX_CHIPSELECT		4
-+#define NXP_FSPI_MIN_IOMAP	SZ_4M
- 
- struct nxp_fspi_devtype_data {
- 	unsigned int rxfifo;
-@@ -345,6 +346,8 @@ struct nxp_fspi {
- 	void __iomem *ahb_addr;
- 	u32 memmap_phy;
- 	u32 memmap_phy_size;
-+	u32 memmap_start;
-+	u32 memmap_len;
- 	struct clk *clk, *clk_en;
- 	struct device *dev;
- 	struct completion c;
-@@ -657,12 +660,35 @@ static void nxp_fspi_select_mem(struct n
- 	f->selected = spi->chip_select;
- }
- 
--static void nxp_fspi_read_ahb(struct nxp_fspi *f, const struct spi_mem_op *op)
-+static int nxp_fspi_read_ahb(struct nxp_fspi *f, const struct spi_mem_op *op)
- {
-+	u32 start = op->addr.val;
- 	u32 len = op->data.nbytes;
- 
-+	/* if necessary, ioremap before AHB read */
-+	if ((!f->ahb_addr) || start < f->memmap_start ||
-+	     start + len > f->memmap_start + f->memmap_len) {
-+		if (f->ahb_addr)
-+			iounmap(f->ahb_addr);
-+
-+		f->memmap_start = start;
-+		f->memmap_len = len > NXP_FSPI_MIN_IOMAP ?
-+				len : NXP_FSPI_MIN_IOMAP;
-+
-+		f->ahb_addr = ioremap_wc(f->memmap_phy + f->memmap_start,
-+					 f->memmap_len);
-+
-+		if (!f->ahb_addr) {
-+			dev_err(f->dev, "failed to alloc memory\n");
-+			return -ENOMEM;
-+		}
-+	}
-+
- 	/* Read out the data directly from the AHB buffer. */
--	memcpy_fromio(op->data.buf.in, (f->ahb_addr + op->addr.val), len);
-+	memcpy_fromio(op->data.buf.in,
-+		      f->ahb_addr + start - f->memmap_start, len);
-+
-+	return 0;
- }
- 
- static void nxp_fspi_fill_txfifo(struct nxp_fspi *f,
-@@ -822,7 +848,7 @@ static int nxp_fspi_exec_op(struct spi_m
- 	 */
- 	if (op->data.nbytes > (f->devtype_data->rxfifo - 4) &&
- 	    op->data.dir == SPI_MEM_DATA_IN) {
--		nxp_fspi_read_ahb(f, op);
-+		err = nxp_fspi_read_ahb(f, op);
- 	} else {
- 		if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_OUT)
- 			nxp_fspi_fill_txfifo(f, op);
-@@ -993,9 +1019,8 @@ static int nxp_fspi_probe(struct platfor
- 
- 	/* find the resources - controller memory mapped space */
- 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fspi_mmap");
--	f->ahb_addr = devm_ioremap_resource(dev, res);
--	if (IS_ERR(f->ahb_addr)) {
--		ret = PTR_ERR(f->ahb_addr);
-+	if (IS_ERR(res)) {
-+		ret = PTR_ERR(res);
- 		goto err_put_ctrl;
- 	}
- 
-@@ -1079,6 +1104,9 @@ static int nxp_fspi_remove(struct platfo
- 
- 	mutex_destroy(&f->lock);
- 
-+	if (f->ahb_addr)
-+		iounmap(f->ahb_addr);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/817-spi-0005-spi-spi-nxp-fspi-Enable-the-Octal-Mode-in-MCR0.patch b/target/linux/layerscape/patches-5.4/817-spi-0005-spi-spi-nxp-fspi-Enable-the-Octal-Mode-in-MCR0.patch
deleted file mode 100644
index 4f7f784b1e..0000000000
--- a/target/linux/layerscape/patches-5.4/817-spi-0005-spi-spi-nxp-fspi-Enable-the-Octal-Mode-in-MCR0.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From cfa4dd5aafd797de69eb7c450d1236ba456dc543 Mon Sep 17 00:00:00 2001
-From: Han Xu <han.xu@nxp.com>
-Date: Wed, 30 Oct 2019 10:46:15 -0500
-Subject: [PATCH] spi: spi-nxp-fspi: Enable the Octal Mode in MCR0
-
-Enable the octal combination mode in MCR0
-
-Signed-off-by: Han Xu <han.xu@nxp.com>
----
- drivers/spi/spi-nxp-fspi.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/spi/spi-nxp-fspi.c
-+++ b/drivers/spi/spi-nxp-fspi.c
-@@ -913,8 +913,9 @@ static int nxp_fspi_default_setup(struct
- 	fspi_writel(f, FSPI_DLLBCR_OVRDEN, base + FSPI_DLLBCR);
- 
- 	/* enable module */
--	fspi_writel(f, FSPI_MCR0_AHB_TIMEOUT(0xFF) | FSPI_MCR0_IP_TIMEOUT(0xFF),
--		 base + FSPI_MCR0);
-+	fspi_writel(f, FSPI_MCR0_AHB_TIMEOUT(0xFF) |
-+		    FSPI_MCR0_IP_TIMEOUT(0xFF) | (u32) FSPI_MCR0_OCTCOMB_EN,
-+		    base + FSPI_MCR0);
- 
- 	/*
- 	 * Disable same device enable bit and configure all slave devices
diff --git a/target/linux/layerscape/patches-5.4/817-spi-0006-LF-20-2-mtd-spi-nor-Use-1-bit-mode-of-spansion-s25fs.patch b/target/linux/layerscape/patches-5.4/817-spi-0006-LF-20-2-mtd-spi-nor-Use-1-bit-mode-of-spansion-s25fs.patch
deleted file mode 100644
index 8488bbaf50..0000000000
--- a/target/linux/layerscape/patches-5.4/817-spi-0006-LF-20-2-mtd-spi-nor-Use-1-bit-mode-of-spansion-s25fs.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 316be7f5f5f05e846b639b1eeee4267e18db9e69 Mon Sep 17 00:00:00 2001
-From: Kuldeep Singh <kuldeep.singh@nxp.com>
-Date: Fri, 3 Jan 2020 14:45:05 +0530
-Subject: [PATCH] LF-20-2 mtd: spi-nor: Use 1 bit mode of spansion(s25fs512s)
- flash
-
-Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2420,7 +2420,7 @@ static const struct flash_info spi_nor_i
- 	{ "s25fl512s",  INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
- 			SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- 			SPI_NOR_HAS_LOCK | USE_CLSR) },
--	{ "s25fs512s",  INFO6(0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
-+	{ "s25fs512s",  INFO6(0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_4B_OPCODES | USE_CLSR) },
- 	{ "s70fl01gs",  INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
- 	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
- 	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
diff --git a/target/linux/layerscape/patches-5.4/817-spi-0007-LF-18-3-spi-fsl-qspi-Allocate-AHB-memory-dynamically.patch b/target/linux/layerscape/patches-5.4/817-spi-0007-LF-18-3-spi-fsl-qspi-Allocate-AHB-memory-dynamically.patch
deleted file mode 100644
index 256d205e3b..0000000000
--- a/target/linux/layerscape/patches-5.4/817-spi-0007-LF-18-3-spi-fsl-qspi-Allocate-AHB-memory-dynamically.patch
+++ /dev/null
@@ -1,187 +0,0 @@
-From 2fc26b1b6377156e07c6c9ce934c58f634fcd21b Mon Sep 17 00:00:00 2001
-From: Kuldeep Singh <kuldeep.singh@nxp.com>
-Date: Wed, 1 Apr 2020 14:51:37 +0800
-Subject: [PATCH] LF-18-3 spi: fsl-qspi: Allocate AHB memory dynamically for
- imx platforms
-
-LS platforms doesn't require dynamic allocaltion of AHB memory. So, let's
-define a quirk which allocates AHB memory dynamically only for imx
-platforms.
-
-Fixes: c70adc97("spi: spi-fsl-qspi: dynamically alloc AHB memory for QSPI")
-Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/spi/spi-fsl-qspi.c | 71 +++++++++++++++++++++++++++++++++++-----------
- 1 file changed, 55 insertions(+), 16 deletions(-)
-
---- a/drivers/spi/spi-fsl-qspi.c
-+++ b/drivers/spi/spi-fsl-qspi.c
-@@ -197,6 +197,12 @@
-  */
- #define QUADSPI_QUIRK_USE_TDH_SETTING	BIT(5)
- 
-+/*
-+ * Use flash size for imx platforms and not for LS platforms. Define a
-+ * quirk which enables it only on imx platforms.
-+ */
-+#define QUADSPI_QUIRK_USE_FLASH_SIZE	BIT(6)
-+
- #define QUADSPI_MIN_IOMAP		SZ_4M
- 
- struct fsl_qspi_devtype_data {
-@@ -213,7 +219,7 @@ static const struct fsl_qspi_devtype_dat
- 	.txfifo = SZ_64,
- 	.invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
- 	.ahb_buf_size = SZ_1K,
--	.quirks = QUADSPI_QUIRK_SWAP_ENDIAN,
-+	.quirks = QUADSPI_QUIRK_SWAP_ENDIAN | QUADSPI_QUIRK_USE_FLASH_SIZE,
- 	.little_endian = true,
- };
- 
-@@ -222,7 +228,8 @@ static const struct fsl_qspi_devtype_dat
- 	.txfifo = SZ_512,
- 	.invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
- 	.ahb_buf_size = SZ_1K,
--	.quirks = QUADSPI_QUIRK_4X_INT_CLK | QUADSPI_QUIRK_TKT245618,
-+	.quirks = QUADSPI_QUIRK_4X_INT_CLK | QUADSPI_QUIRK_TKT245618 |
-+		  QUADSPI_QUIRK_USE_FLASH_SIZE,
- 	.little_endian = true,
- };
- 
-@@ -232,7 +239,7 @@ static const struct fsl_qspi_devtype_dat
- 	.invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
- 	.ahb_buf_size = SZ_1K,
- 	.quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK |
--		  QUADSPI_QUIRK_USE_TDH_SETTING,
-+		  QUADSPI_QUIRK_USE_TDH_SETTING | QUADSPI_QUIRK_USE_FLASH_SIZE,
- 	.little_endian = true,
- };
- 
-@@ -242,7 +249,7 @@ static const struct fsl_qspi_devtype_dat
- 	.invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
- 	.ahb_buf_size = SZ_1K,
- 	.quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK |
--		  QUADSPI_QUIRK_USE_TDH_SETTING,
-+		  QUADSPI_QUIRK_USE_TDH_SETTING | QUADSPI_QUIRK_USE_FLASH_SIZE,
- 	.little_endian = true,
- };
- 
-@@ -310,6 +317,11 @@ static inline int needs_tdh_setting(stru
- 	return q->devtype_data->quirks & QUADSPI_QUIRK_USE_TDH_SETTING;
- }
- 
-+static inline int needs_flash_size(struct fsl_qspi *q)
-+{
-+	return q->devtype_data->quirks & QUADSPI_QUIRK_USE_FLASH_SIZE;
-+}
-+
- /*
-  * An IC bug makes it necessary to rearrange the 32-bit data.
-  * Later chips, such as IMX6SLX, have fixed this bug.
-@@ -556,6 +568,14 @@ static void fsl_qspi_select_mem(struct f
- 
- static int fsl_qspi_read_ahb(struct fsl_qspi *q, const struct spi_mem_op *op)
- {
-+	if (!needs_flash_size(q)) {
-+		u32 size = q->devtype_data->ahb_buf_size;
-+		memcpy_fromio(op->data.buf.in,
-+			      q->ahb_addr + q->selected * size,
-+			      op->data.nbytes);
-+		return 0;
-+	}
-+
- 	u32 start = op->addr.val + q->selected * q->memmap_phy_size / 4;
- 	u32 len = op->data.nbytes;
- 
-@@ -674,6 +694,7 @@ static int fsl_qspi_exec_op(struct spi_m
- 	u32 addr_offset = 0;
- 	int err = 0;
- 	int invalid_mstrid = q->devtype_data->invalid_mstrid;
-+	u32 size = q->devtype_data->ahb_buf_size;
- 
- 	mutex_lock(&q->lock);
- 
-@@ -686,8 +707,11 @@ static int fsl_qspi_exec_op(struct spi_m
- 	if (needs_amba_base_offset(q))
- 		addr_offset = q->memmap_phy;
- 
-+	if (needs_flash_size(q))
-+		size = q->memmap_phy_size / 4;
-+
- 	qspi_writel(q,
--		    q->selected * q->memmap_phy_size / 4 + addr_offset,
-+		    q->selected * size + addr_offset,
- 		    base + QUADSPI_SFAR);
- 
- 	qspi_writel(q, qspi_readl(q, base + QUADSPI_MCR) |
-@@ -751,6 +775,7 @@ static int fsl_qspi_default_setup(struct
- 	void __iomem *base = q->iobase;
- 	u32 reg, addr_offset = 0;
- 	int ret;
-+	u32 size = q->devtype_data->ahb_buf_size;
- 
- 	/* disable and unprepare clock to avoid glitch pass to controller */
- 	fsl_qspi_clk_disable_unprep(q);
-@@ -805,19 +830,22 @@ static int fsl_qspi_default_setup(struct
- 		addr_offset = q->memmap_phy;
- 
- 	/*
--	 * In HW there can be a maximum of four chips on two buses with
--	 * two chip selects on each bus. We use four chip selects in SW
--	 * to differentiate between the four chips.
--	 * We divide the total memory region size equally for each chip
--	 * and set SFA1AD, SFA2AD, SFB1AD, SFB2AD accordingly.
-+	 * In HW there can be a maximum of four chips on two buses with two
-+	 * chip selects on each bus. We use four chip selects in SW to
-+	 * differentiate between the four chips. We divide the total memory
-+	 * region/ahb_buf_size size equally for each chip and set SFA1AD,
-+	 * SFA2AD, SFB1AD, SFB2AD accordingly.
- 	 */
--	qspi_writel(q, q->memmap_phy_size / 4 + addr_offset,
-+	if (needs_flash_size(q))
-+		size = q->memmap_phy_size / 4;
-+
-+	qspi_writel(q, size + addr_offset,
- 		    base + QUADSPI_SFA1AD);
--	qspi_writel(q, q->memmap_phy_size / 4 * 2 + addr_offset,
-+	qspi_writel(q, size * 2 + addr_offset,
- 		    base + QUADSPI_SFA2AD);
--	qspi_writel(q, q->memmap_phy_size / 4 * 3 + addr_offset,
-+	qspi_writel(q, size * 3 + addr_offset,
- 		    base + QUADSPI_SFB1AD);
--	qspi_writel(q, q->memmap_phy_size / 4 * 4 + addr_offset,
-+	qspi_writel(q, size * 4 + addr_offset,
- 		    base + QUADSPI_SFB2AD);
- 
- 	q->selected = -1;
-@@ -904,6 +932,15 @@ static int fsl_qspi_probe(struct platfor
- 
- 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- 					"QuadSPI-memory");
-+
-+	if (!needs_flash_size(q)) {
-+		q->ahb_addr = devm_ioremap_resource(dev, res);
-+		if (IS_ERR(q->ahb_addr)) {
-+			ret = PTR_ERR(q->ahb_addr);
-+			goto err_put_ctrl;
-+		}
-+	}
-+
- 	q->memmap_phy = res->start;
- 	q->memmap_phy_size = resource_size(res);
- 
-@@ -979,8 +1016,10 @@ static int fsl_qspi_remove(struct platfo
- 
- 	mutex_destroy(&q->lock);
- 
--	if (q->ahb_addr)
--		iounmap(q->ahb_addr);
-+	if (needs_flash_size(q)) {
-+		if (q->ahb_addr)
-+			iounmap(q->ahb_addr);
-+	}
- 
- 	return 0;
- }
diff --git a/target/linux/layerscape/patches-5.4/818-thermal-0001-thermal-Add-generic-device-cooling-support.patch b/target/linux/layerscape/patches-5.4/818-thermal-0001-thermal-Add-generic-device-cooling-support.patch
deleted file mode 100644
index f947eb6e32..0000000000
--- a/target/linux/layerscape/patches-5.4/818-thermal-0001-thermal-Add-generic-device-cooling-support.patch
+++ /dev/null
@@ -1,253 +0,0 @@
-From 97abcfc5219149ff7d4883b295c80257f0315b5e Mon Sep 17 00:00:00 2001
-From: Anson Huang <Anson.Huang@nxp.com>
-Date: Wed, 7 Aug 2019 08:40:59 +0800
-Subject: [PATCH] thermal: Add generic device cooling support
-
-To compatible with previous implementation, add generic device
-cooling support, each thermal zone will register a cooling
-device, and when temperature exceed passive trip, the device
-cooling driver will send out a system wide notification, each
-device supporting cooling will need to register device cooling
-and takes action when passive trip is exceeded;
-
-Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- drivers/thermal/Kconfig          |   7 ++
- drivers/thermal/Makefile         |   1 +
- drivers/thermal/device_cooling.c | 152 +++++++++++++++++++++++++++++++++++++++
- include/linux/device_cooling.h   |  45 ++++++++++++
- 4 files changed, 205 insertions(+)
- create mode 100644 drivers/thermal/device_cooling.c
- create mode 100644 include/linux/device_cooling.h
-
---- a/drivers/thermal/Kconfig
-+++ b/drivers/thermal/Kconfig
-@@ -233,6 +233,13 @@ config IMX_THERMAL
- 	  cpufreq is used as the cooling device to throttle CPUs when the
- 	  passive trip is crossed.
- 
-+config DEVICE_THERMAL
-+	tristate "generic device cooling support"
-+	help
-+	  Support for device cooling.
-+	  It supports notification of crossing passive trip for devices,
-+	  devices need to do their own actions to cool down the SOC.
-+
- config MAX77620_THERMAL
- 	tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
- 	depends on MFD_MAX77620
---- a/drivers/thermal/Makefile
-+++ b/drivers/thermal/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_DB8500_THERMAL)	+= db8500_t
- obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
- obj-$(CONFIG_TANGO_THERMAL)	+= tango_thermal.o
- obj-$(CONFIG_IMX_THERMAL)	+= imx_thermal.o
-+obj-$(CONFIG_DEVICE_THERMAL)	+= device_cooling.o
- obj-$(CONFIG_MAX77620_THERMAL)	+= max77620_thermal.o
- obj-$(CONFIG_QORIQ_THERMAL)	+= qoriq_thermal.o
- obj-$(CONFIG_DA9062_THERMAL)	+= da9062-thermal.o
---- /dev/null
-+++ b/drivers/thermal/device_cooling.c
-@@ -0,0 +1,152 @@
-+/*
-+ * Copyright (C) 2013-2015 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/thermal.h>
-+#include <linux/err.h>
-+#include <linux/slab.h>
-+
-+struct devfreq_cooling_device {
-+	int id;
-+	struct thermal_cooling_device *cool_dev;
-+	unsigned int devfreq_state;
-+};
-+
-+static DEFINE_IDR(devfreq_idr);
-+static DEFINE_MUTEX(devfreq_cooling_lock);
-+
-+#define	MAX_STATE	1
-+
-+static BLOCKING_NOTIFIER_HEAD(devfreq_cooling_chain_head);
-+
-+int register_devfreq_cooling_notifier(struct notifier_block *nb)
-+{
-+	return blocking_notifier_chain_register(
-+		&devfreq_cooling_chain_head, nb);
-+}
-+EXPORT_SYMBOL_GPL(register_devfreq_cooling_notifier);
-+
-+int unregister_devfreq_cooling_notifier(struct notifier_block *nb)
-+{
-+	return blocking_notifier_chain_unregister(
-+		&devfreq_cooling_chain_head, nb);
-+}
-+EXPORT_SYMBOL_GPL(unregister_devfreq_cooling_notifier);
-+
-+static int devfreq_cooling_notifier_call_chain(unsigned long val)
-+{
-+	return (blocking_notifier_call_chain(
-+		&devfreq_cooling_chain_head, val, NULL)
-+		== NOTIFY_BAD) ? -EINVAL : 0;
-+}
-+
-+static int devfreq_set_cur_state(struct thermal_cooling_device *cdev,
-+				 unsigned long state)
-+{
-+	struct devfreq_cooling_device *devfreq_device = cdev->devdata;
-+	int ret;
-+
-+	ret = devfreq_cooling_notifier_call_chain(state);
-+	if (ret)
-+		return -EINVAL;
-+
-+	devfreq_device->devfreq_state = state;
-+
-+	return 0;
-+}
-+
-+static int devfreq_get_max_state(struct thermal_cooling_device *cdev,
-+				 unsigned long *state)
-+{
-+	*state = MAX_STATE;
-+
-+	return 0;
-+}
-+
-+static int devfreq_get_cur_state(struct thermal_cooling_device *cdev,
-+				 unsigned long *state)
-+{
-+	struct devfreq_cooling_device *devfreq_device = cdev->devdata;
-+
-+	*state = devfreq_device->devfreq_state;
-+
-+	return 0;
-+}
-+
-+static struct thermal_cooling_device_ops const devfreq_cooling_ops = {
-+	.get_max_state = devfreq_get_max_state,
-+	.get_cur_state = devfreq_get_cur_state,
-+	.set_cur_state = devfreq_set_cur_state,
-+};
-+
-+static int get_idr(struct idr *idr, int *id)
-+{
-+	int ret;
-+
-+	mutex_lock(&devfreq_cooling_lock);
-+	ret = idr_alloc(idr, NULL, 0, 0, GFP_KERNEL);
-+	mutex_unlock(&devfreq_cooling_lock);
-+	if (unlikely(ret < 0))
-+		return ret;
-+	*id = ret;
-+
-+	return 0;
-+}
-+
-+static void release_idr(struct idr *idr, int id)
-+{
-+	mutex_lock(&devfreq_cooling_lock);
-+	idr_remove(idr, id);
-+	mutex_unlock(&devfreq_cooling_lock);
-+}
-+
-+struct thermal_cooling_device *devfreq_cooling_register(void)
-+{
-+	struct thermal_cooling_device *cool_dev;
-+	struct devfreq_cooling_device *devfreq_dev = NULL;
-+	char dev_name[THERMAL_NAME_LENGTH];
-+	int ret = 0;
-+
-+	devfreq_dev = kzalloc(sizeof(struct devfreq_cooling_device),
-+			      GFP_KERNEL);
-+	if (!devfreq_dev)
-+		return ERR_PTR(-ENOMEM);
-+
-+	ret = get_idr(&devfreq_idr, &devfreq_dev->id);
-+	if (ret) {
-+		kfree(devfreq_dev);
-+		return ERR_PTR(-EINVAL);
-+	}
-+
-+	snprintf(dev_name, sizeof(dev_name), "thermal-devfreq-%d",
-+		 devfreq_dev->id);
-+
-+	cool_dev = thermal_cooling_device_register(dev_name, devfreq_dev,
-+						   &devfreq_cooling_ops);
-+	if (!cool_dev) {
-+		release_idr(&devfreq_idr, devfreq_dev->id);
-+		kfree(devfreq_dev);
-+		return ERR_PTR(-EINVAL);
-+	}
-+	devfreq_dev->cool_dev = cool_dev;
-+	devfreq_dev->devfreq_state = 0;
-+
-+	return cool_dev;
-+}
-+EXPORT_SYMBOL_GPL(devfreq_cooling_register);
-+
-+void devfreq_cooling_unregister(struct thermal_cooling_device *cdev)
-+{
-+	struct devfreq_cooling_device *devfreq_dev = cdev->devdata;
-+
-+	thermal_cooling_device_unregister(devfreq_dev->cool_dev);
-+	release_idr(&devfreq_idr, devfreq_dev->id);
-+	kfree(devfreq_dev);
-+}
-+EXPORT_SYMBOL_GPL(devfreq_cooling_unregister);
---- /dev/null
-+++ b/include/linux/device_cooling.h
-@@ -0,0 +1,45 @@
-+/*
-+ * Copyright (C) 2013-2015 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef __DEVICE_THERMAL_H__
-+#define __DEVICE_THERMAL_H__
-+
-+#include <linux/thermal.h>
-+
-+#ifdef CONFIG_DEVICE_THERMAL
-+int register_devfreq_cooling_notifier(struct notifier_block *nb);
-+int unregister_devfreq_cooling_notifier(struct notifier_block *nb);
-+struct thermal_cooling_device *devfreq_cooling_register(void);
-+void devfreq_cooling_unregister(struct thermal_cooling_device *cdev);
-+#else
-+static inline
-+int register_devfreq_cooling_notifier(struct notifier_block *nb)
-+{
-+	return 0;
-+}
-+
-+static inline
-+int unregister_devfreq_cooling_notifier(struct notifier_block *nb)
-+{
-+	return 0;
-+}
-+
-+static inline
-+struct thermal_cooling_device *devfreq_cooling_register(void)
-+{
-+	return NULL;
-+}
-+
-+static inline
-+void devfreq_cooling_unregister(struct thermal_cooling_device *cdev)
-+{
-+	return;
-+}
-+#endif
-+#endif /* __DEVICE_THERMAL_H__ */
diff --git a/target/linux/layerscape/patches-5.4/818-thermal-0002-thermal-qoriq-Add-device-cooling-support.patch b/target/linux/layerscape/patches-5.4/818-thermal-0002-thermal-qoriq-Add-device-cooling-support.patch
deleted file mode 100644
index 4777ce939c..0000000000
--- a/target/linux/layerscape/patches-5.4/818-thermal-0002-thermal-qoriq-Add-device-cooling-support.patch
+++ /dev/null
@@ -1,145 +0,0 @@
-From 0a5d1b571ba5bca9c6737572ea4c8b1ad896c3fc Mon Sep 17 00:00:00 2001
-From: Anson Huang <Anson.Huang@nxp.com>
-Date: Wed, 7 Aug 2019 13:24:26 +0800
-Subject: [PATCH] thermal: qoriq: Add device cooling support
-
-Register device cooling for first thermal zone manually, when
-temperature exceeds passive trip, system wide cooling notification
-will be triggered.
-
-Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
----
- drivers/thermal/qoriq_thermal.c | 80 ++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 79 insertions(+), 1 deletion(-)
-
---- a/drivers/thermal/qoriq_thermal.c
-+++ b/drivers/thermal/qoriq_thermal.c
-@@ -3,6 +3,7 @@
- // Copyright 2016 Freescale Semiconductor, Inc.
- 
- #include <linux/clk.h>
-+#include <linux/device_cooling.h>
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/err.h>
-@@ -14,6 +15,7 @@
- #include "thermal_core.h"
- 
- #define SITES_MAX	16
-+#define TMU_TEMP_PASSIVE_COOL_DELTA	10000
- 
- /*
-  * QorIQ TMU Registers
-@@ -69,6 +71,9 @@ struct qoriq_sensor {
- 	struct thermal_zone_device	*tzd;
- 	struct qoriq_tmu_data		*qdata;
- 	int				id;
-+	int				temp_passive;
-+	int				temp_critical;
-+	struct thermal_cooling_device 	*cdev;
- };
- 
- struct qoriq_tmu_data {
-@@ -78,6 +83,12 @@ struct qoriq_tmu_data {
- 	struct qoriq_sensor	*sensor[SITES_MAX];
- };
- 
-+enum tmu_trip {
-+	TMU_TRIP_PASSIVE,
-+	TMU_TRIP_CRITICAL,
-+	TMU_TRIP_NUM,
-+};
-+
- static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem *addr)
- {
- 	if (p->little_endian)
-@@ -106,14 +117,51 @@ static int tmu_get_temp(void *p, int *te
- 	return 0;
- }
- 
-+static int tmu_get_trend(void *p, int trip, enum thermal_trend *trend)
-+{
-+	struct qoriq_sensor *qsensor = p;
-+	int trip_temp;
-+
-+	if (!qsensor->tzd)
-+		return 0;
-+
-+	trip_temp = (trip == TMU_TRIP_PASSIVE) ? qsensor->temp_passive :
-+					     qsensor->temp_critical;
-+
-+	if (qsensor->tzd->temperature >=
-+		(trip_temp - TMU_TEMP_PASSIVE_COOL_DELTA))
-+		*trend = THERMAL_TREND_RAISE_FULL;
-+	else
-+		*trend = THERMAL_TREND_DROP_FULL;
-+
-+	return 0;
-+}
-+
-+static int tmu_set_trip_temp(void *p, int trip,
-+			     int temp)
-+{
-+	struct qoriq_sensor *qsensor = p;
-+
-+	if (trip == TMU_TRIP_CRITICAL)
-+		qsensor->temp_critical = temp;
-+
-+	if (trip == TMU_TRIP_PASSIVE)
-+		qsensor->temp_passive = temp;
-+
-+	return 0;
-+}
-+
- static const struct thermal_zone_of_device_ops tmu_tz_ops = {
- 	.get_temp = tmu_get_temp,
-+	.get_trend = tmu_get_trend,
-+	.set_trip_temp = tmu_set_trip_temp,
- };
- 
- static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
- {
- 	struct qoriq_tmu_data *qdata = platform_get_drvdata(pdev);
--	int id, sites = 0;
-+	const struct thermal_trip *trip;
-+	int id, sites = 0, ret;
- 
- 	for (id = 0; id < SITES_MAX; id++) {
- 		qdata->sensor[id] = devm_kzalloc(&pdev->dev,
-@@ -132,6 +180,36 @@ static int qoriq_tmu_register_tmu_zone(s
- 				return PTR_ERR(qdata->sensor[id]->tzd);
- 		}
- 
-+		/* first thermal zone takes care of system-wide device cooling */
-+		if (id == 0) {
-+			qdata->sensor[id]->cdev = devfreq_cooling_register();
-+			if (IS_ERR(qdata->sensor[id]->cdev)) {
-+				ret = PTR_ERR(qdata->sensor[id]->cdev);
-+				pr_err("failed to register devfreq cooling device: %d\n",
-+					ret);
-+				return ret;
-+			}
-+
-+			ret = thermal_zone_bind_cooling_device(qdata->sensor[id]->tzd,
-+				TMU_TRIP_PASSIVE,
-+				qdata->sensor[id]->cdev,
-+				THERMAL_NO_LIMIT,
-+				THERMAL_NO_LIMIT,
-+				THERMAL_WEIGHT_DEFAULT);
-+			if (ret) {
-+				pr_err("binding zone %s with cdev %s failed:%d\n",
-+					qdata->sensor[id]->tzd->type,
-+					qdata->sensor[id]->cdev->type,
-+					ret);
-+				devfreq_cooling_unregister(qdata->sensor[id]->cdev);
-+				return ret;
-+			}
-+
-+			trip = of_thermal_get_trip_points(qdata->sensor[id]->tzd);
-+			qdata->sensor[id]->temp_passive = trip[0].temperature;
-+			qdata->sensor[id]->temp_critical = trip[1].temperature;
-+		}
-+
- 		sites |= 0x1 << (15 - id);
- 	}
- 
diff --git a/target/linux/layerscape/patches-5.4/818-thermal-0003-thermal-qoriq-add-thermal-monitor-unit-version-2-sup.patch b/target/linux/layerscape/patches-5.4/818-thermal-0003-thermal-qoriq-add-thermal-monitor-unit-version-2-sup.patch
deleted file mode 100644
index 5dbf3ec455..0000000000
--- a/target/linux/layerscape/patches-5.4/818-thermal-0003-thermal-qoriq-add-thermal-monitor-unit-version-2-sup.patch
+++ /dev/null
@@ -1,211 +0,0 @@
-From 031573a8a1e73b0ac548812c10c3e426c2b4ce61 Mon Sep 17 00:00:00 2001
-From: Yuantian Tang <andy.tang@nxp.com>
-Date: Tue, 15 Oct 2019 20:08:58 +0800
-Subject: [PATCH] thermal: qoriq: add thermal monitor unit version 2 support
-
-Thermal Monitor Unit v2 is introduced on new Layscape SoC.
-Compared to v1, TMUv2 has a little different register layout
-and digital output is fairly linear.
-
-Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
-Reviewed-by: Anson Huang <Anson.Huang@nxp.com>
----
- drivers/thermal/qoriq_thermal.c | 118 ++++++++++++++++++++++++++++++++--------
- 1 file changed, 96 insertions(+), 22 deletions(-)
-
---- a/drivers/thermal/qoriq_thermal.c
-+++ b/drivers/thermal/qoriq_thermal.c
-@@ -16,6 +16,15 @@
- 
- #define SITES_MAX	16
- #define TMU_TEMP_PASSIVE_COOL_DELTA	10000
-+#define TMR_DISABLE		0x0
-+#define TMR_ME			0x80000000
-+#define TMR_ALPF		0x0c000000
-+#define TMR_ALPF_V2		0x03000000
-+#define TMTMIR_DEFAULT	0x0000000f
-+#define TIER_DISABLE	0x0
-+#define TEUMR0_V2		0x51009c00
-+#define TMU_VER1		0x1
-+#define TMU_VER2		0x2
- 
- /*
-  * QorIQ TMU Registers
-@@ -26,17 +35,12 @@ struct qoriq_tmu_site_regs {
- 	u8 res0[0x8];
- };
- 
--struct qoriq_tmu_regs {
-+struct qoriq_tmu_regs_v1 {
- 	u32 tmr;		/* Mode Register */
--#define TMR_DISABLE	0x0
--#define TMR_ME		0x80000000
--#define TMR_ALPF	0x0c000000
- 	u32 tsr;		/* Status Register */
- 	u32 tmtmir;		/* Temperature measurement interval Register */
--#define TMTMIR_DEFAULT	0x0000000f
- 	u8 res0[0x14];
- 	u32 tier;		/* Interrupt Enable Register */
--#define TIER_DISABLE	0x0
- 	u32 tidr;		/* Interrupt Detect Register */
- 	u32 tiscr;		/* Interrupt Site Capture Register */
- 	u32 ticscr;		/* Interrupt Critical Site Capture Register */
-@@ -56,12 +60,52 @@ struct qoriq_tmu_regs {
- 	u32 ipbrr0;		/* IP Block Revision Register 0 */
- 	u32 ipbrr1;		/* IP Block Revision Register 1 */
- 	u8 res6[0x310];
--	u32 ttr0cr;		/* Temperature Range 0 Control Register */
--	u32 ttr1cr;		/* Temperature Range 1 Control Register */
--	u32 ttr2cr;		/* Temperature Range 2 Control Register */
--	u32 ttr3cr;		/* Temperature Range 3 Control Register */
-+	u32 ttrcr[4];		/* Temperature Range Control Register */
- };
- 
-+struct qoriq_tmu_regs_v2 {
-+	u32 tmr;		/* Mode Register */
-+	u32 tsr;		/* Status Register */
-+	u32 tmsr;		/* monitor site register */
-+	u32 tmtmir;		/* Temperature measurement interval Register */
-+	u8 res0[0x10];
-+	u32 tier;		/* Interrupt Enable Register */
-+	u32 tidr;		/* Interrupt Detect Register */
-+	u8 res1[0x8];
-+	u32 tiiscr;		/* interrupt immediate site capture register */
-+	u32 tiascr;		/* interrupt average site capture register */
-+	u32 ticscr;		/* Interrupt Critical Site Capture Register */
-+	u32 res2;
-+	u32 tmhtcr;		/* monitor high temperature capture register */
-+	u32 tmltcr;		/* monitor low temperature capture register */
-+	u32 tmrtrcr;	/* monitor rising temperature rate capture register */
-+	u32 tmftrcr;	/* monitor falling temperature rate capture register */
-+	u32 tmhtitr;	/* High Temperature Immediate Threshold */
-+	u32 tmhtatr;	/* High Temperature Average Threshold */
-+	u32 tmhtactr;	/* High Temperature Average Crit Threshold */
-+	u32 res3;
-+	u32 tmltitr;	/* monitor low temperature immediate threshold */
-+	u32 tmltatr;	/* monitor low temperature average threshold register */
-+	u32 tmltactr;	/* monitor low temperature average critical threshold */
-+	u32 res4;
-+	u32 tmrtrctr;	/* monitor rising temperature rate critical threshold */
-+	u32 tmftrctr;	/* monitor falling temperature rate critical threshold*/
-+	u8 res5[0x8];
-+	u32 ttcfgr;	/* Temperature Configuration Register */
-+	u32 tscfgr;	/* Sensor Configuration Register */
-+	u8 res6[0x78];
-+	struct qoriq_tmu_site_regs site[SITES_MAX];
-+	u8 res7[0x9f8];
-+	u32 ipbrr0;		/* IP Block Revision Register 0 */
-+	u32 ipbrr1;		/* IP Block Revision Register 1 */
-+	u8 res8[0x300];
-+	u32 teumr0;
-+	u32 teumr1;
-+	u32 teumr2;
-+	u32 res9;
-+	u32 ttrcr[4];	/* Temperature Range Control Register */
-+ };
-+ 
- struct qoriq_tmu_data;
- 
- /*
-@@ -77,7 +121,9 @@ struct qoriq_sensor {
- };
- 
- struct qoriq_tmu_data {
--	struct qoriq_tmu_regs __iomem *regs;
-+	int ver;
-+	struct qoriq_tmu_regs_v1 __iomem *regs;
-+	struct qoriq_tmu_regs_v2 __iomem *regs_v2;
- 	struct clk *clk;
- 	bool little_endian;
- 	struct qoriq_sensor	*sensor[SITES_MAX];
-@@ -210,12 +256,23 @@ static int qoriq_tmu_register_tmu_zone(s
- 			qdata->sensor[id]->temp_critical = trip[1].temperature;
- 		}
- 
--		sites |= 0x1 << (15 - id);
-+		if (qdata->ver == TMU_VER1)
-+			sites |= 0x1 << (15 - id);
-+		else
-+			sites |= 0x1 << id;
- 	}
- 
- 	/* Enable monitoring */
--	if (sites != 0)
--		tmu_write(qdata, sites | TMR_ME | TMR_ALPF, &qdata->regs->tmr);
-+	if (sites != 0) {
-+		if (qdata->ver == TMU_VER1) {
-+			tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
-+					&qdata->regs->tmr);
-+		} else {
-+			tmu_write(qdata, sites, &qdata->regs_v2->tmsr);
-+			tmu_write(qdata, TMR_ME | TMR_ALPF_V2,
-+					&qdata->regs_v2->tmr);
-+		}
-+	}
- 
- 	return 0;
- }
-@@ -228,16 +285,21 @@ static int qoriq_tmu_calibration(struct
- 	struct device_node *np = pdev->dev.of_node;
- 	struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
- 
--	if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) {
--		dev_err(&pdev->dev, "missing calibration range.\n");
--		return -ENODEV;
-+	len = of_property_count_u32_elems(np, "fsl,tmu-range");
-+	if (len < 0 || len > 4) {
-+		dev_err(&pdev->dev, "invalid range data.\n");
-+		return len;
-+	}
-+
-+	val = of_property_read_u32_array(np, "fsl,tmu-range", range, len);
-+	if (val != 0) {
-+		dev_err(&pdev->dev, "failed to read range data.\n");
-+		return val;
- 	}
- 
- 	/* Init temperature range registers */
--	tmu_write(data, range[0], &data->regs->ttr0cr);
--	tmu_write(data, range[1], &data->regs->ttr1cr);
--	tmu_write(data, range[2], &data->regs->ttr2cr);
--	tmu_write(data, range[3], &data->regs->ttr3cr);
-+	for (i = 0; i < len; i++)
-+		tmu_write(data, range[i], &data->regs->ttrcr[i]);
- 
- 	calibration = of_get_property(np, "fsl,tmu-calibration", &len);
- 	if (calibration == NULL || len % 8) {
-@@ -261,7 +323,12 @@ static void qoriq_tmu_init_device(struct
- 	tmu_write(data, TIER_DISABLE, &data->regs->tier);
- 
- 	/* Set update_interval */
--	tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
-+	if (data->ver == TMU_VER1) {
-+		tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
-+	} else {
-+		tmu_write(data, TMTMIR_DEFAULT, &data->regs_v2->tmtmir);
-+		tmu_write(data, TEUMR0_V2, &data->regs_v2->teumr0);
-+	}
- 
- 	/* Disable monitoring */
- 	tmu_write(data, TMR_DISABLE, &data->regs->tmr);
-@@ -270,6 +337,7 @@ static void qoriq_tmu_init_device(struct
- static int qoriq_tmu_probe(struct platform_device *pdev)
- {
- 	int ret;
-+	u32 ver;
- 	struct qoriq_tmu_data *data;
- 	struct device_node *np = pdev->dev.of_node;
- 
-@@ -298,6 +366,12 @@ static int qoriq_tmu_probe(struct platfo
- 		return ret;
- 	}
- 
-+	/* version register offset at: 0xbf8 on both v1 and v2 */
-+	ver = tmu_read(data, &data->regs->ipbrr0);
-+	data->ver = (ver >> 8) & 0xff;
-+	if (data->ver == TMU_VER2)
-+		data->regs_v2 = (void __iomem *)data->regs;
-+
- 	qoriq_tmu_init_device(data);	/* TMU initialization */
- 
- 	ret = qoriq_tmu_calibration(pdev);	/* TMU calibration */
diff --git a/target/linux/layerscape/patches-5.4/818-thermal-0004-thermal-qoriq-Update-the-settings-for-TMUv2.patch b/target/linux/layerscape/patches-5.4/818-thermal-0004-thermal-qoriq-Update-the-settings-for-TMUv2.patch
deleted file mode 100644
index 5b90b63aa4..0000000000
--- a/target/linux/layerscape/patches-5.4/818-thermal-0004-thermal-qoriq-Update-the-settings-for-TMUv2.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From da5a7765a20d34508036ba8ed1db87e546abcf4b Mon Sep 17 00:00:00 2001
-From: Yuantian Tang <andy.tang@nxp.com>
-Date: Mon, 25 May 2020 17:33:22 +0800
-Subject: [PATCH] thermal: qoriq: Update the settings for TMUv2
-
-For TMU v2, TMSAR registers need to be set properly to get the
-accurate temperature values.
-Also the temperature read needs to be converted to degree Celsius
-since it is in degrees Kelvin.
-
-Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
----
- drivers/thermal/qoriq_thermal.c | 21 +++++++++++++++++++--
- 1 file changed, 19 insertions(+), 2 deletions(-)
-
---- a/drivers/thermal/qoriq_thermal.c
-+++ b/drivers/thermal/qoriq_thermal.c
-@@ -23,6 +23,7 @@
- #define TMTMIR_DEFAULT	0x0000000f
- #define TIER_DISABLE	0x0
- #define TEUMR0_V2		0x51009c00
-+#define TMSARA_V2		0xe
- #define TMU_VER1		0x1
- #define TMU_VER2		0x2
- 
-@@ -35,6 +36,13 @@ struct qoriq_tmu_site_regs {
- 	u8 res0[0x8];
- };
- 
-+struct qoriq_tmu_tmsar {
-+	u32 res0;
-+	u32 tmsar;
-+	u32 res1;
-+	u32 res2;
-+};
-+
- struct qoriq_tmu_regs_v1 {
- 	u32 tmr;		/* Mode Register */
- 	u32 tsr;		/* Status Register */
-@@ -95,7 +103,9 @@ struct qoriq_tmu_regs_v2 {
- 	u32 tscfgr;	/* Sensor Configuration Register */
- 	u8 res6[0x78];
- 	struct qoriq_tmu_site_regs site[SITES_MAX];
--	u8 res7[0x9f8];
-+	u8 res10[0x100];
-+	struct qoriq_tmu_tmsar tmsar[16];
-+	u8 res7[0x7f8];
- 	u32 ipbrr0;		/* IP Block Revision Register 0 */
- 	u32 ipbrr1;		/* IP Block Revision Register 1 */
- 	u8 res8[0x300];
-@@ -158,7 +168,10 @@ static int tmu_get_temp(void *p, int *te
- 	u32 val;
- 
- 	val = tmu_read(qdata, &qdata->regs->site[qsensor->id].tritsr);
--	*temp = (val & 0xff) * 1000;
-+	if (qdata->ver == TMU_VER1)
-+		*temp = (val & 0xff) * 1000;
-+	else
-+		*temp = (val & 0x1ff) * 1000 - 273150;
- 
- 	return 0;
- }
-@@ -319,6 +332,8 @@ static int qoriq_tmu_calibration(struct
- 
- static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
- {
-+	int i;
-+
- 	/* Disable interrupt, using polling instead */
- 	tmu_write(data, TIER_DISABLE, &data->regs->tier);
- 
-@@ -328,6 +343,8 @@ static void qoriq_tmu_init_device(struct
- 	} else {
- 		tmu_write(data, TMTMIR_DEFAULT, &data->regs_v2->tmtmir);
- 		tmu_write(data, TEUMR0_V2, &data->regs_v2->teumr0);
-+		for (i = 0; i < 7; i++)
-+			tmu_write(data, TMSARA_V2, &data->regs_v2->tmsar[i].tmsar);
- 	}
- 
- 	/* Disable monitoring */
diff --git a/target/linux/layerscape/patches-5.4/819-uart-0001-tty-serial-lpuart-add-power-domain-support.patch b/target/linux/layerscape/patches-5.4/819-uart-0001-tty-serial-lpuart-add-power-domain-support.patch
deleted file mode 100644
index 120a14c3be..0000000000
--- a/target/linux/layerscape/patches-5.4/819-uart-0001-tty-serial-lpuart-add-power-domain-support.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From e8730a6bd02cf4f6a3e2d11585d91c0417ed92e5 Mon Sep 17 00:00:00 2001
-From: Fugang Duan <fugang.duan@nxp.com>
-Date: Wed, 10 Jul 2019 14:20:45 +0800
-Subject: [PATCH] tty: serial: lpuart: add power domain support
-
-lpuart dma mode depends on dma channel's power domain like:
-power-domains = <&pd IMX_SC_R_UART_1>,
-                <&pd IMX_SC_R_DMA_2_CH10>,
-                <&pd IMX_SC_R_DMA_2_CH11>;
-power-domain-names = "uart", "rxdma", "txdma";
-
-So define the multiple power domain for lpuart.
-
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
----
- drivers/tty/serial/fsl_lpuart.c | 54 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 54 insertions(+)
-
---- a/drivers/tty/serial/fsl_lpuart.c
-+++ b/drivers/tty/serial/fsl_lpuart.c
-@@ -20,6 +20,8 @@
- #include <linux/of.h>
- #include <linux/of_device.h>
- #include <linux/of_dma.h>
-+#include <linux/pm_domain.h>
-+#include <linux/pm_runtime.h>
- #include <linux/serial_core.h>
- #include <linux/slab.h>
- #include <linux/tty_flip.h>
-@@ -2394,6 +2396,54 @@ static struct uart_driver lpuart_reg = {
- 	.cons		= LPUART_CONSOLE,
- };
- 
-+static int lpuart_attach_pd(struct device *dev)
-+{
-+	struct device *pd_uart;
-+	struct device *pd_txdma, *pd_rxdma;
-+	struct device_link *link;
-+
-+	if (dev->pm_domain)
-+		return 0;
-+
-+	pd_uart = dev_pm_domain_attach_by_name(dev, "uart");
-+	if (IS_ERR(pd_uart))
-+		return PTR_ERR(pd_uart);
-+	link = device_link_add(dev, pd_uart, DL_FLAG_STATELESS |
-+					     DL_FLAG_PM_RUNTIME |
-+					     DL_FLAG_RPM_ACTIVE);
-+	if (IS_ERR(link)) {
-+		dev_err(dev, "Failed to add device_link to uart pd: %ld\n",
-+			PTR_ERR(link));
-+		return PTR_ERR(link);
-+	}
-+
-+	pd_txdma = dev_pm_domain_attach_by_name(dev, "txdma");
-+	if (IS_ERR(pd_txdma))
-+		return PTR_ERR(pd_txdma);
-+	link = device_link_add(dev, pd_txdma, DL_FLAG_STATELESS |
-+					     DL_FLAG_PM_RUNTIME |
-+					     DL_FLAG_RPM_ACTIVE);
-+	if (IS_ERR(link)) {
-+		dev_err(dev, "Failed to add device_link to uart pd: %ld\n",
-+			PTR_ERR(link));
-+		return PTR_ERR(link);
-+	}
-+
-+	pd_rxdma = dev_pm_domain_attach_by_name(dev, "rxdma");
-+	if (IS_ERR(pd_rxdma))
-+		return PTR_ERR(pd_rxdma);
-+	link = device_link_add(dev, pd_rxdma, DL_FLAG_STATELESS |
-+					     DL_FLAG_PM_RUNTIME |
-+					     DL_FLAG_RPM_ACTIVE);
-+	if (IS_ERR(link)) {
-+		dev_err(dev, "Failed to add device_link to uart pd: %ld\n",
-+			PTR_ERR(link));
-+		return PTR_ERR(link);
-+	}
-+
-+	return 0;
-+}
-+
- static int lpuart_probe(struct platform_device *pdev)
- {
- 	const struct of_device_id *of_id = of_match_device(lpuart_dt_ids,
-@@ -2431,6 +2481,10 @@ static int lpuart_probe(struct platform_
- 
- 	sport->port.rs485_config = lpuart_config_rs485;
- 
-+	ret = lpuart_attach_pd(&pdev->dev);
-+	if (ret)
-+		return ret;
-+
- 	sport->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
- 	if (IS_ERR(sport->ipg_clk)) {
- 		ret = PTR_ERR(sport->ipg_clk);
diff --git a/target/linux/layerscape/patches-5.4/819-uart-0002-tty-serial-fsl_lpuart-add-modem-device-reset.patch b/target/linux/layerscape/patches-5.4/819-uart-0002-tty-serial-fsl_lpuart-add-modem-device-reset.patch
deleted file mode 100644
index a287cd7f05..0000000000
--- a/target/linux/layerscape/patches-5.4/819-uart-0002-tty-serial-fsl_lpuart-add-modem-device-reset.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 5b05462e88dc87d83566d04dd196b4f3d9dc0eef Mon Sep 17 00:00:00 2001
-From: Fugang Duan <fugang.duan@nxp.com>
-Date: Mon, 28 Jan 2019 10:12:52 +0800
-Subject: [PATCH] tty: serial: fsl_lpuart: add modem device reset
-
-Add modem device reset, wthether to reset depend on dts configuration.
-
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
----
- drivers/tty/serial/fsl_lpuart.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/tty/serial/fsl_lpuart.c
-+++ b/drivers/tty/serial/fsl_lpuart.c
-@@ -22,6 +22,7 @@
- #include <linux/of_dma.h>
- #include <linux/pm_domain.h>
- #include <linux/pm_runtime.h>
-+#include <linux/reset.h>
- #include <linux/serial_core.h>
- #include <linux/slab.h>
- #include <linux/tty_flip.h>
-@@ -1555,8 +1556,17 @@ static void lpuart32_configure(struct lp
- static int lpuart32_startup(struct uart_port *port)
- {
- 	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
-+	struct tty_port *tty_port = &sport->port.state->port;
- 	unsigned long flags;
- 	unsigned long temp;
-+	int ret;
-+
-+	/* some modem may need reset */
-+	if (!tty_port_suspended(tty_port)) {
-+		ret = device_reset(sport->port.dev);
-+		if (ret && ret != -ENOENT)
-+			return ret;
-+	}
- 
- 	/* determine FIFO size */
- 	temp = lpuart32_read(&sport->port, UARTFIFO);
diff --git a/target/linux/layerscape/patches-5.4/819-uart-0003-tty-serial-fsl_lpuart-add-magic-SysRq-support.patch b/target/linux/layerscape/patches-5.4/819-uart-0003-tty-serial-fsl_lpuart-add-magic-SysRq-support.patch
deleted file mode 100644
index dc2ace7be2..0000000000
--- a/target/linux/layerscape/patches-5.4/819-uart-0003-tty-serial-fsl_lpuart-add-magic-SysRq-support.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 74d7e639cce7ae95cacd948dcf5ed3b28c3fff5c Mon Sep 17 00:00:00 2001
-From: Fugang Duan <fugang.duan@nxp.com>
-Date: Mon, 28 Jan 2019 10:27:27 +0800
-Subject: [PATCH] tty: serial: fsl_lpuart: add magic SysRq support
-
-Add magic SysRq key support.
-
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
----
- drivers/tty/serial/fsl_lpuart.c | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
---- a/drivers/tty/serial/fsl_lpuart.c
-+++ b/drivers/tty/serial/fsl_lpuart.c
-@@ -931,7 +931,12 @@ static void lpuart32_rxint(struct lpuart
- 		 */
- 		sr = lpuart32_read(&sport->port, UARTSTAT);
- 		rx = lpuart32_read(&sport->port, UARTDATA);
--		rx &= 0x3ff;
-+
-+		if ((sr & UARTSTAT_FE) && (rx & UARTDATA_FRETSC) &&
-+			!(rx & UARTDATA_MASK)) {
-+			if (uart_handle_break(&sport->port))
-+				continue;
-+		}
- 
- 		if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
- 			continue;
diff --git a/target/linux/layerscape/patches-5.4/819-uart-0005-tty-serial-fsl_lpuart-enable-dma-mode-for-imx8qxp.patch b/target/linux/layerscape/patches-5.4/819-uart-0005-tty-serial-fsl_lpuart-enable-dma-mode-for-imx8qxp.patch
deleted file mode 100644
index f07abc2469..0000000000
--- a/target/linux/layerscape/patches-5.4/819-uart-0005-tty-serial-fsl_lpuart-enable-dma-mode-for-imx8qxp.patch
+++ /dev/null
@@ -1,558 +0,0 @@
-From 0d6e214f5a257f9b53619ef8aa3b6e767189bdcf Mon Sep 17 00:00:00 2001
-From: Fugang Duan <fugang.duan@nxp.com>
-Date: Wed, 11 Sep 2019 16:21:06 +0800
-Subject: [PATCH] tty: serial: fsl_lpuart: enable dma mode for imx8qxp
-
-imx8qxp lpuart support eDMA for dma mode, support EOP (end-of-packet)
-feature. But eDMA cannot detect the correct DADDR for current major
-loop in cyclic mode, so it doesn't support cyclic mode.
-
-The patch is to enable lpuart prep slave sg dma mode for imx8qxp.
-
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
----
- drivers/tty/serial/fsl_lpuart.c | 280 +++++++++++++++++++++++++++++++---------
- 1 file changed, 219 insertions(+), 61 deletions(-)
-
---- a/drivers/tty/serial/fsl_lpuart.c
-+++ b/drivers/tty/serial/fsl_lpuart.c
-@@ -131,6 +131,7 @@
- #define UARTBAUD_M10		0x20000000
- #define UARTBAUD_TDMAE		0x00800000
- #define UARTBAUD_RDMAE		0x00200000
-+#define UARTBAUD_RIDMAE		0x00100000
- #define UARTBAUD_MATCFG		0x00400000
- #define UARTBAUD_BOTHEDGE	0x00020000
- #define UARTBAUD_RESYNCDIS	0x00010000
-@@ -179,7 +180,7 @@
- #define UARTCTRL_SBK		0x00010000
- #define UARTCTRL_MA1IE		0x00008000
- #define UARTCTRL_MA2IE		0x00004000
--#define UARTCTRL_IDLECFG	0x00000100
-+#define UARTCTRL_IDLECFG_OFF	0x8
- #define UARTCTRL_LOOPS		0x00000080
- #define UARTCTRL_DOZEEN		0x00000040
- #define UARTCTRL_RSRC		0x00000020
-@@ -197,6 +198,7 @@
- #define UARTDATA_MASK		0x3ff
- 
- #define UARTMODIR_IREN		0x00020000
-+#define UARTMODIR_RTSWATER_S	0x8
- #define UARTMODIR_TXCTSSRC	0x00000020
- #define UARTMODIR_TXCTSC	0x00000010
- #define UARTMODIR_RXRTSE	0x00000008
-@@ -210,6 +212,8 @@
- #define UARTFIFO_RXUF		0x00010000
- #define UARTFIFO_TXFLUSH	0x00008000
- #define UARTFIFO_RXFLUSH	0x00004000
-+#define UARTFIFO_RXIDEN_MASK	0x7
-+#define UARTFIFO_RXIDEN_OFF	10
- #define UARTFIFO_TXOFE		0x00000200
- #define UARTFIFO_RXUFE		0x00000100
- #define UARTFIFO_TXFE		0x00000080
-@@ -226,6 +230,9 @@
- #define UARTWATER_TXWATER_OFF	0
- #define UARTWATER_RXWATER_OFF	16
- 
-+#define UARTFIFO_RXIDEN_RDRF	0x3
-+#define UARTCTRL_IDLECFG	0x7
-+
- /* Rx DMA timeout in ms, which is used to calculate Rx ring buffer size */
- #define DMA_RX_TIMEOUT		(10)
- 
-@@ -254,6 +261,9 @@ struct lpuart_port {
- 	unsigned int		txfifo_size;
- 	unsigned int		rxfifo_size;
- 
-+	u8			rx_watermark;
-+	bool			dma_eeop;
-+	bool			rx_dma_cyclic;
- 	bool			lpuart_dma_tx_use;
- 	bool			lpuart_dma_rx_use;
- 	struct dma_chan		*dma_tx_chan;
-@@ -279,33 +289,45 @@ struct lpuart_soc_data {
- 	enum lpuart_type devtype;
- 	char iotype;
- 	u8 reg_off;
-+	u8 rx_watermark;
-+	bool rx_dma_cyclic;
- };
- 
- static const struct lpuart_soc_data vf_data = {
- 	.devtype = VF610_LPUART,
- 	.iotype = UPIO_MEM,
-+	.rx_watermark = 1,
-+	.rx_dma_cyclic = true,
- };
- 
- static const struct lpuart_soc_data ls1021a_data = {
- 	.devtype = LS1021A_LPUART,
- 	.iotype = UPIO_MEM32BE,
-+	.rx_watermark = 0,
-+	.rx_dma_cyclic = true,
- };
- 
- static const struct lpuart_soc_data ls1028a_data = {
- 	.devtype = LS1028A_LPUART,
- 	.iotype = UPIO_MEM32,
-+	.rx_watermark = 0,
-+	.rx_dma_cyclic = true,
- };
- 
- static struct lpuart_soc_data imx7ulp_data = {
- 	.devtype = IMX7ULP_LPUART,
- 	.iotype = UPIO_MEM32,
- 	.reg_off = IMX_REG_OFF,
-+	.rx_watermark = 0,
-+	.rx_dma_cyclic = true,
- };
- 
- static struct lpuart_soc_data imx8qxp_data = {
- 	.devtype = IMX8QXP_LPUART,
- 	.iotype = UPIO_MEM32,
- 	.reg_off = IMX_REG_OFF,
-+	.rx_watermark = 31,
-+	.rx_dma_cyclic = false,
- };
- 
- static const struct of_device_id lpuart_dt_ids[] = {
-@@ -320,6 +342,7 @@ MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
- 
- /* Forward declare this for the dma callbacks*/
- static void lpuart_dma_tx_complete(void *arg);
-+static int lpuart_sched_rx_dma(struct lpuart_port *sport);
- 
- static inline bool is_layerscape_lpuart(struct lpuart_port *sport)
- {
-@@ -1011,19 +1034,15 @@ static irqreturn_t lpuart32_int(int irq,
- 	if ((sts & UARTSTAT_TDRE) && !sport->lpuart_dma_tx_use)
- 		lpuart32_txint(sport);
- 
-+	if (sport->lpuart_dma_rx_use && sport->dma_eeop)
-+		sts &= ~UARTSTAT_IDLE;
-+
- 	lpuart32_write(&sport->port, sts, UARTSTAT);
- 	return IRQ_HANDLED;
- }
- 
--static void lpuart_copy_rx_to_tty(struct lpuart_port *sport)
-+static void lpuart_rx_error_stat(struct lpuart_port *sport)
- {
--	struct tty_port *port = &sport->port.state->port;
--	struct dma_tx_state state;
--	enum dma_status dmastat;
--	struct circ_buf *ring = &sport->rx_ring;
--	unsigned long flags;
--	int count = 0;
--
- 	if (lpuart_is_32(sport)) {
- 		unsigned long sr = lpuart32_read(&sport->port, UARTSTAT);
- 
-@@ -1075,8 +1094,21 @@ static void lpuart_copy_rx_to_tty(struct
- 			writeb(cr2, sport->port.membase + UARTCR2);
- 		}
- 	}
-+}
-+
-+static void lpuart_copy_rx_to_tty(struct lpuart_port *sport)
-+{
-+	struct tty_port *port = &sport->port.state->port;
-+	struct dma_tx_state state;
-+	enum dma_status dmastat;
-+	struct circ_buf *ring = &sport->rx_ring;
-+	unsigned long flags;
-+	int count = 0;
- 
--	async_tx_ack(sport->dma_rx_desc);
-+	if (!is_imx8qxp_lpuart(sport)) {
-+		lpuart_rx_error_stat(sport);
-+		async_tx_ack(sport->dma_rx_desc);
-+	}
- 
- 	spin_lock_irqsave(&sport->port.lock, flags);
- 
-@@ -1139,7 +1171,33 @@ static void lpuart_copy_rx_to_tty(struct
- 	spin_unlock_irqrestore(&sport->port.lock, flags);
- 
- 	tty_flip_buffer_push(port);
--	mod_timer(&sport->lpuart_timer, jiffies + sport->dma_rx_timeout);
-+
-+	if (!sport->dma_eeop)
-+		mod_timer(&sport->lpuart_timer,
-+			  jiffies + sport->dma_rx_timeout);
-+}
-+
-+static void lpuart_dma_rx_post_handler(struct lpuart_port *sport)
-+{
-+	unsigned long flags;
-+	unsigned long rxcount;
-+
-+	spin_lock_irqsave(&sport->port.lock, flags);
-+
-+	/* For end of packet, clear the idle flag to avoid to trigger
-+	 * the next transfer. Only i.MX8x lpuart support EEOP.
-+	 */
-+	if (sport->dma_eeop && lpuart_is_32(sport)) {
-+		rxcount = lpuart32_read(&sport->port, UARTWATER);
-+		rxcount = rxcount >> UARTWATER_RXCNT_OFF;
-+		if (!rxcount)
-+			lpuart32_write(&sport->port, UARTSTAT_IDLE, UARTSTAT);
-+	}
-+
-+	lpuart_sched_rx_dma(sport);
-+
-+	spin_unlock_irqrestore(&sport->port.lock, flags);
-+
- }
- 
- static void lpuart_dma_rx_complete(void *arg)
-@@ -1147,6 +1205,8 @@ static void lpuart_dma_rx_complete(void
- 	struct lpuart_port *sport = arg;
- 
- 	lpuart_copy_rx_to_tty(sport);
-+	if (!sport->rx_dma_cyclic)
-+		lpuart_dma_rx_post_handler(sport);
- }
- 
- static void lpuart_timer_func(struct timer_list *t)
-@@ -1154,13 +1214,78 @@ static void lpuart_timer_func(struct tim
- 	struct lpuart_port *sport = from_timer(sport, t, lpuart_timer);
- 
- 	lpuart_copy_rx_to_tty(sport);
-+	if (!sport->rx_dma_cyclic) {
-+		dmaengine_terminate_async(sport->dma_rx_chan);
-+		lpuart_dma_rx_post_handler(sport);
-+	}
- }
- 
--static inline int lpuart_start_rx_dma(struct lpuart_port *sport)
-+static int lpuart_sched_rxdma_cyclic(struct lpuart_port *sport)
-+{
-+	sport->dma_rx_desc = dmaengine_prep_dma_cyclic(sport->dma_rx_chan,
-+				 sg_dma_address(&sport->rx_sgl),
-+				 sport->rx_sgl.length,
-+				 sport->rx_sgl.length / 2,
-+				 DMA_DEV_TO_MEM,
-+				 DMA_PREP_INTERRUPT);
-+	if (!sport->dma_rx_desc) {
-+		dev_err(sport->port.dev, "Cannot prepare cyclic DMA\n");
-+		return -EFAULT;
-+	}
-+
-+	return 0;
-+}
-+
-+static int lpuart_sched_rxdma_slave_sg(struct lpuart_port *sport)
-+{
-+	dma_sync_sg_for_device(sport->port.dev, &sport->rx_sgl, 1,
-+			       DMA_FROM_DEVICE);
-+	sport->dma_rx_desc = dmaengine_prep_slave_sg(sport->dma_rx_chan,
-+				&sport->rx_sgl,
-+				1,
-+				DMA_DEV_TO_MEM,
-+				DMA_PREP_INTERRUPT);
-+	if (!sport->dma_rx_desc) {
-+		dev_err(sport->port.dev, "Cannot prepare slave_sg DMA\n");
-+		return -EFAULT;
-+	}
-+	sport->rx_ring.tail = 0;
-+	sport->rx_ring.head = 0;
-+
-+	return 0;
-+}
-+
-+static int lpuart_sched_rx_dma(struct lpuart_port *sport)
-+{
-+	unsigned long temp;
-+	int ret;
-+
-+	if (sport->rx_dma_cyclic)
-+		ret = lpuart_sched_rxdma_cyclic(sport);
-+	else
-+		ret = lpuart_sched_rxdma_slave_sg(sport);
-+
-+	sport->dma_rx_desc->callback = lpuart_dma_rx_complete;
-+	sport->dma_rx_desc->callback_param = sport;
-+	sport->dma_rx_cookie = dmaengine_submit(sport->dma_rx_desc);
-+	dma_async_issue_pending(sport->dma_rx_chan);
-+
-+	if (lpuart_is_32(sport)) {
-+		temp = lpuart32_read(&sport->port, UARTBAUD);
-+		if (sport->dma_eeop)
-+			temp |= UARTBAUD_RIDMAE;
-+		temp |= UARTBAUD_RDMAE;
-+		lpuart32_write(&sport->port, temp, UARTBAUD);
-+	} else {
-+		writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_RDMAS,
-+		       sport->port.membase + UARTCR5);
-+	}
-+
-+	return ret;
-+}
-+
-+static void lpuart_get_rx_dma_rng_len(struct lpuart_port *sport)
- {
--	struct dma_slave_config dma_rx_sconfig = {};
--	struct circ_buf *ring = &sport->rx_ring;
--	int ret, nent;
- 	int bits, baud;
- 	struct tty_port *port = &sport->port.state->port;
- 	struct tty_struct *tty = port->tty;
-@@ -1180,6 +1305,18 @@ static inline int lpuart_start_rx_dma(st
- 	sport->rx_dma_rng_buf_len = (1 << (fls(sport->rx_dma_rng_buf_len) - 1));
- 	if (sport->rx_dma_rng_buf_len < 16)
- 		sport->rx_dma_rng_buf_len = 16;
-+}
-+
-+static inline int lpuart_start_rx_dma(struct lpuart_port *sport)
-+{
-+	struct dma_slave_config dma_rx_sconfig = {};
-+	struct circ_buf *ring = &sport->rx_ring;
-+	int ret, nent;
-+
-+	if (!sport->dma_eeop)
-+		lpuart_get_rx_dma_rng_len(sport);
-+	else
-+		sport->rx_dma_rng_buf_len = PAGE_SIZE;
- 
- 	ring->buf = kzalloc(sport->rx_dma_rng_buf_len, GFP_ATOMIC);
- 	if (!ring->buf)
-@@ -1205,32 +1342,7 @@ static inline int lpuart_start_rx_dma(st
- 		return ret;
- 	}
- 
--	sport->dma_rx_desc = dmaengine_prep_dma_cyclic(sport->dma_rx_chan,
--				 sg_dma_address(&sport->rx_sgl),
--				 sport->rx_sgl.length,
--				 sport->rx_sgl.length / 2,
--				 DMA_DEV_TO_MEM,
--				 DMA_PREP_INTERRUPT);
--	if (!sport->dma_rx_desc) {
--		dev_err(sport->port.dev, "Cannot prepare cyclic DMA\n");
--		return -EFAULT;
--	}
--
--	sport->dma_rx_desc->callback = lpuart_dma_rx_complete;
--	sport->dma_rx_desc->callback_param = sport;
--	sport->dma_rx_cookie = dmaengine_submit(sport->dma_rx_desc);
--	dma_async_issue_pending(sport->dma_rx_chan);
--
--	if (lpuart_is_32(sport)) {
--		unsigned long temp = lpuart32_read(&sport->port, UARTBAUD);
--
--		lpuart32_write(&sport->port, temp | UARTBAUD_RDMAE, UARTBAUD);
--	} else {
--		writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_RDMAS,
--		       sport->port.membase + UARTCR5);
--	}
--
--	return 0;
-+	return lpuart_sched_rx_dma(sport);
- }
- 
- static void lpuart_dma_rx_free(struct uart_port *port)
-@@ -1416,8 +1528,10 @@ static void lpuart_setup_watermark(struc
- 		writeb(UARTSFIFO_RXUF, sport->port.membase + UARTSFIFO);
- 	}
- 
-+	if (uart_console(&sport->port))
-+		sport->rx_watermark = 1;
- 	writeb(0, sport->port.membase + UARTTWFIFO);
--	writeb(1, sport->port.membase + UARTRWFIFO);
-+	writeb(sport->rx_watermark, sport->port.membase + UARTRWFIFO);
- 
- 	/* Restore cr2 */
- 	writeb(cr2_saved, sport->port.membase + UARTCR2);
-@@ -1438,6 +1552,7 @@ static void lpuart32_setup_watermark(str
- {
- 	unsigned long val, ctrl;
- 	unsigned long ctrl_saved;
-+	unsigned long rxiden_cnt;
- 
- 	ctrl = lpuart32_read(&sport->port, UARTCTRL);
- 	ctrl_saved = ctrl;
-@@ -1449,12 +1564,26 @@ static void lpuart32_setup_watermark(str
- 	val = lpuart32_read(&sport->port, UARTFIFO);
- 	val |= UARTFIFO_TXFE | UARTFIFO_RXFE;
- 	val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH;
-+	val &= ~(UARTFIFO_RXIDEN_MASK << UARTFIFO_RXIDEN_OFF);
-+	rxiden_cnt = sport->dma_eeop ? 0 : UARTFIFO_RXIDEN_RDRF;
-+	val |= ((rxiden_cnt & UARTFIFO_RXIDEN_MASK) <<
-+		UARTFIFO_RXIDEN_OFF);
- 	lpuart32_write(&sport->port, val, UARTFIFO);
- 
- 	/* set the watermark */
--	val = (0x1 << UARTWATER_RXWATER_OFF) | (0x0 << UARTWATER_TXWATER_OFF);
-+	if (uart_console(&sport->port))
-+		sport->rx_watermark = 1;
-+	val = (sport->rx_watermark << UARTWATER_RXWATER_OFF) |
-+	      (0x0 << UARTWATER_TXWATER_OFF);
- 	lpuart32_write(&sport->port, val, UARTWATER);
- 
-+	/* set RTS watermark */
-+	if (!uart_console(&sport->port)) {
-+		val = lpuart32_read(&sport->port, UARTMODIR);
-+		val = (sport->rxfifo_size >> 1) << UARTMODIR_RTSWATER_S;
-+		lpuart32_write(&sport->port, val, UARTMODIR);
-+	}
-+
- 	/* Restore cr2 */
- 	lpuart32_write(&sport->port, ctrl_saved, UARTCTRL);
- }
-@@ -1466,17 +1595,29 @@ static void lpuart32_setup_watermark_ena
- 	lpuart32_setup_watermark(sport);
- 
- 	temp = lpuart32_read(&sport->port, UARTCTRL);
--	temp |= UARTCTRL_RE | UARTCTRL_TE | UARTCTRL_ILIE;
-+	temp |= UARTCTRL_RE | UARTCTRL_TE;
-+	temp |= UARTCTRL_IDLECFG << UARTCTRL_IDLECFG_OFF;
- 	lpuart32_write(&sport->port, temp, UARTCTRL);
- }
- 
- static void rx_dma_timer_init(struct lpuart_port *sport)
- {
-+	if (sport->dma_eeop)
-+		return;
-+
- 	timer_setup(&sport->lpuart_timer, lpuart_timer_func, 0);
- 	sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout;
- 	add_timer(&sport->lpuart_timer);
- }
- 
-+static void lpuart_del_timer_sync(struct lpuart_port *sport)
-+{
-+	if (sport->dma_eeop)
-+		return;
-+
-+	del_timer_sync(&sport->lpuart_timer);
-+}
-+
- static void lpuart_tx_dma_startup(struct lpuart_port *sport)
- {
- 	u32 uartbaud;
-@@ -1540,19 +1681,23 @@ static int lpuart_startup(struct uart_po
- 	return 0;
- }
- 
-+static void lpuart32_hw_disable(struct lpuart_port *sport)
-+{
-+	unsigned long temp;
-+
-+	temp = lpuart32_read(&sport->port, UARTCTRL);
-+	temp &= ~(UARTCTRL_RIE | UARTCTRL_ILIE | UARTCTRL_RE |
-+		  UARTCTRL_TIE | UARTCTRL_TE);
-+	lpuart32_write(&sport->port, temp, UARTCTRL);
-+}
-+
- static void lpuart32_configure(struct lpuart_port *sport)
- {
- 	unsigned long temp;
- 
--	if (sport->lpuart_dma_rx_use) {
--		/* RXWATER must be 0 */
--		temp = lpuart32_read(&sport->port, UARTWATER);
--		temp &= ~(UARTWATER_WATER_MASK << UARTWATER_RXWATER_OFF);
--		lpuart32_write(&sport->port, temp, UARTWATER);
--	}
- 	temp = lpuart32_read(&sport->port, UARTCTRL);
- 	if (!sport->lpuart_dma_rx_use)
--		temp |= UARTCTRL_RIE;
-+		temp |= UARTCTRL_RIE | UARTCTRL_ILIE;
- 	if (!sport->lpuart_dma_tx_use)
- 		temp |= UARTCTRL_TIE;
- 	lpuart32_write(&sport->port, temp, UARTCTRL);
-@@ -1596,12 +1741,12 @@ static int lpuart32_startup(struct uart_
- 
- 	spin_lock_irqsave(&sport->port.lock, flags);
- 
--	lpuart32_setup_watermark_enable(sport);
--
-+	lpuart32_hw_disable(sport);
- 
- 	lpuart_rx_dma_startup(sport);
- 	lpuart_tx_dma_startup(sport);
- 
-+	lpuart32_setup_watermark_enable(sport);
- 	lpuart32_configure(sport);
- 
- 	spin_unlock_irqrestore(&sport->port.lock, flags);
-@@ -1611,7 +1756,7 @@ static int lpuart32_startup(struct uart_
- static void lpuart_dma_shutdown(struct lpuart_port *sport)
- {
- 	if (sport->lpuart_dma_rx_use) {
--		del_timer_sync(&sport->lpuart_timer);
-+		lpuart_del_timer_sync(sport);
- 		lpuart_dma_rx_free(&sport->port);
- 	}
- 
-@@ -1652,11 +1797,22 @@ static void lpuart32_shutdown(struct uar
- 
- 	spin_lock_irqsave(&port->lock, flags);
- 
-+	/* clear statue */
-+	temp = lpuart32_read(&sport->port, UARTSTAT);
-+	lpuart32_write(&sport->port, temp, UARTSTAT);
-+
-+	/* disable Rx/Tx DMA */
-+	temp = lpuart32_read(port, UARTBAUD);
-+	temp &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE | UARTBAUD_RIDMAE);
-+	lpuart32_write(port, temp, UARTBAUD);
-+
- 	/* disable Rx/Tx and interrupts */
- 	temp = lpuart32_read(port, UARTCTRL);
--	temp &= ~(UARTCTRL_TE | UARTCTRL_RE |
--			UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE);
-+	temp &= ~(UARTCTRL_TE | UARTCTRL_RE | UARTCTRL_TIE |
-+		UARTCTRL_TCIE | UARTCTRL_RIE | UARTCTRL_ILIE |
-+		UARTCTRL_LOOPS);
- 	lpuart32_write(port, temp, UARTCTRL);
-+	lpuart32_write(port, 0, UARTMODIR);
- 
- 	spin_unlock_irqrestore(&port->lock, flags);
- 
-@@ -1753,10 +1909,10 @@ lpuart_set_termios(struct uart_port *por
- 	 * baud rate and restart Rx DMA path.
- 	 *
- 	 * Since timer function acqures sport->port.lock, need to stop before
--	 * acquring same lock because otherwise del_timer_sync() can deadlock.
-+	 * acquring same lock because otherwise lpuart_del_timer_sync() can deadlock.
- 	 */
- 	if (old && sport->lpuart_dma_rx_use) {
--		del_timer_sync(&sport->lpuart_timer);
-+		lpuart_del_timer_sync(sport);
- 		lpuart_dma_rx_free(&sport->port);
- 	}
- 
-@@ -1968,10 +2124,10 @@ lpuart32_set_termios(struct uart_port *p
- 	 * baud rate and restart Rx DMA path.
- 	 *
- 	 * Since timer function acqures sport->port.lock, need to stop before
--	 * acquring same lock because otherwise del_timer_sync() can deadlock.
-+	 * acquring same lock because otherwise lpuart_del_timer_sync() can deadlock.
- 	 */
- 	if (old && sport->lpuart_dma_rx_use) {
--		del_timer_sync(&sport->lpuart_timer);
-+		lpuart_del_timer_sync(sport);
- 		lpuart_dma_rx_free(&sport->port);
- 	}
- 
-@@ -2483,6 +2639,10 @@ static int lpuart_probe(struct platform_
- 	sport->port.dev = &pdev->dev;
- 	sport->port.type = PORT_LPUART;
- 	sport->devtype = sdata->devtype;
-+	sport->rx_dma_cyclic = sdata->rx_dma_cyclic;
-+	sport->rx_watermark = sdata->rx_watermark;
-+	sport->dma_eeop = is_imx8qxp_lpuart(sport);
-+
- 	ret = platform_get_irq(pdev, 0);
- 	if (ret < 0)
- 		return ret;
-@@ -2645,7 +2805,7 @@ static int lpuart_suspend(struct device
- 		 * Rx DMA path before suspend and start Rx DMA path on resume.
- 		 */
- 		if (irq_wake) {
--			del_timer_sync(&sport->lpuart_timer);
-+			lpuart_del_timer_sync(sport);
- 			lpuart_dma_rx_free(&sport->port);
- 		}
- 
diff --git a/target/linux/layerscape/patches-5.4/819-uart-0006-tty-serial-fsl_lpuart-enable-loopback-mode.patch b/target/linux/layerscape/patches-5.4/819-uart-0006-tty-serial-fsl_lpuart-enable-loopback-mode.patch
deleted file mode 100644
index 303aa3b011..0000000000
--- a/target/linux/layerscape/patches-5.4/819-uart-0006-tty-serial-fsl_lpuart-enable-loopback-mode.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 4dc6f2b9d454099445b8bc3a4a6328761335ce4d Mon Sep 17 00:00:00 2001
-From: Fugang Duan <fugang.duan@nxp.com>
-Date: Wed, 11 Sep 2019 16:23:25 +0800
-Subject: [PATCH] tty: serial: fsl_lpuart: enable loopback mode
-
-Enable lpuart32 loopback mode.
-
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
----
- drivers/tty/serial/fsl_lpuart.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/tty/serial/fsl_lpuart.c
-+++ b/drivers/tty/serial/fsl_lpuart.c
-@@ -1477,6 +1477,14 @@ static void lpuart32_set_mctrl(struct ua
- 		temp |= UARTMODIR_TXCTSE;
- 
- 	lpuart32_write(port, temp, UARTMODIR);
-+
-+	temp = lpuart32_read(port, UARTCTRL);
-+	if (mctrl & TIOCM_LOOP)
-+		temp |= UARTCTRL_LOOPS;
-+	else
-+		temp &= ~UARTCTRL_LOOPS;
-+
-+	lpuart32_write(port, temp, UARTCTRL);
- }
- 
- static void lpuart_break_ctl(struct uart_port *port, int break_state)
diff --git a/target/linux/layerscape/patches-5.4/819-uart-0007-MLK-15094-tty-serial-fsl_lpuart-check-dma_tx_in_prog.patch b/target/linux/layerscape/patches-5.4/819-uart-0007-MLK-15094-tty-serial-fsl_lpuart-check-dma_tx_in_prog.patch
deleted file mode 100644
index 41271f9dfd..0000000000
--- a/target/linux/layerscape/patches-5.4/819-uart-0007-MLK-15094-tty-serial-fsl_lpuart-check-dma_tx_in_prog.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 31a4e41820cdaad9d4c151beefe5ab0698f4865a Mon Sep 17 00:00:00 2001
-From: Fugang Duan <fugang.duan@nxp.com>
-Date: Thu, 15 Jun 2017 16:48:31 +0800
-Subject: [PATCH] MLK-15094 tty: serial: fsl_lpuart: check dma_tx_in_progress
- in callback
-
-There have a corner case that tx DMA .callback() is coming after
-.flush_buffer(), then .callback() should check dma_tx_in_progress
-flag and return in directly.
-
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
-Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
----
- drivers/tty/serial/fsl_lpuart.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/tty/serial/fsl_lpuart.c
-+++ b/drivers/tty/serial/fsl_lpuart.c
-@@ -505,6 +505,10 @@ static void lpuart_dma_tx_complete(void
- 	unsigned long flags;
- 
- 	spin_lock_irqsave(&sport->port.lock, flags);
-+	if (!sport->dma_tx_in_progress) {
-+		spin_unlock_irqrestore(&sport->port.lock, flags);
-+		return;
-+	}
- 
- 	dma_unmap_sg(sport->port.dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE);
- 
diff --git a/target/linux/layerscape/patches-5.4/819-uart-0008-MLK-21445-serial-fsl_lpuart-do-HW-reset-for-communic.patch b/target/linux/layerscape/patches-5.4/819-uart-0008-MLK-21445-serial-fsl_lpuart-do-HW-reset-for-communic.patch
deleted file mode 100644
index a655a5df01..0000000000
--- a/target/linux/layerscape/patches-5.4/819-uart-0008-MLK-21445-serial-fsl_lpuart-do-HW-reset-for-communic.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From d9d113c22c634219cc248a7c6dcf157e2927edad Mon Sep 17 00:00:00 2001
-From: Fugang Duan <fugang.duan@nxp.com>
-Date: Tue, 23 Jul 2019 11:36:22 +0800
-Subject: [PATCH] MLK-21445 serial: fsl_lpuart: do HW reset for communication
- port
-
-Do HW reset for communication port after the port is registered
-if the UART controller support the feature.
-
-Do partition reset with LPUART's power on, LPUART registers will
-keep the previous status, like on i.MX8QM platform,  which is not
-expected action, so reset the HW is required.
-
-Currently, only i.MX7ULP and i.MX8QM LPUART controllers include
-global register that support HW reset.
-
-Tested-by: Robin Gong <yibin.gong@nxp.com>
-Tested-by: Peng Fan <peng.fan@nxp.com>
-Reviewed-by: Robby Cai <robby.cai@nxp.com>
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
-(cherry picked from commit c2bc1f62ec28981462c9cb5ceac17134931ca19f)
-Signed-off-by: Arulpandiyan Vadivel <arulpandiyan_vadivel@mentor.com>
-Signed-off-by: Shrikant Bobade <Shrikant_Bobade@mentor.com>
-(cherry picked from commit 9f396f540093402317c3c1b9a8fe955b91c89164)
----
- drivers/tty/serial/fsl_lpuart.c | 48 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 48 insertions(+)
-
---- a/drivers/tty/serial/fsl_lpuart.c
-+++ b/drivers/tty/serial/fsl_lpuart.c
-@@ -11,6 +11,7 @@
- 
- #include <linux/clk.h>
- #include <linux/console.h>
-+#include <linux/delay.h>
- #include <linux/dma-mapping.h>
- #include <linux/dmaengine.h>
- #include <linux/dmapool.h>
-@@ -116,6 +117,11 @@
- #define UARTSFIFO_TXOF		0x02
- #define UARTSFIFO_RXUF		0x01
- 
-+/* 32-bit global registers only for i.MX7ulp/MX8x
-+ * The driver only use the reset feature to reset HW.
-+ */
-+#define UART_GLOBAL		0x8
-+
- /* 32-bit register definition */
- #define UARTBAUD		0x00
- #define UARTSTAT		0x04
-@@ -230,6 +236,10 @@
- #define UARTWATER_TXWATER_OFF	0
- #define UARTWATER_RXWATER_OFF	16
- 
-+#define UART_GLOBAL_RST		0x2
-+#define RST_HW_MIN_US		20
-+#define RST_HW_MAX_US		40
-+
- #define UARTFIFO_RXIDEN_RDRF	0x3
- #define UARTCTRL_IDLECFG	0x7
- 
-@@ -350,6 +360,11 @@ static inline bool is_layerscape_lpuart(
- 		sport->devtype == LS1028A_LPUART);
- }
- 
-+static inline bool is_imx7ulp_lpuart(struct lpuart_port *sport)
-+{
-+	return sport->devtype == IMX7ULP_LPUART;
-+}
-+
- static inline bool is_imx8qxp_lpuart(struct lpuart_port *sport)
- {
- 	return sport->devtype == IMX8QXP_LPUART;
-@@ -413,6 +428,33 @@ static unsigned int lpuart_get_baud_clk_
- #define lpuart_enable_clks(x)	__lpuart_enable_clks(x, true)
- #define lpuart_disable_clks(x)	__lpuart_enable_clks(x, false)
- 
-+static int lpuart_hw_reset(struct lpuart_port *sport)
-+{
-+	struct uart_port *port = &sport->port;
-+	void __iomem *global_addr;
-+	int ret;
-+
-+	if (uart_console(port))
-+		return 0;
-+
-+	ret = clk_prepare_enable(sport->ipg_clk);
-+	if (ret) {
-+		dev_err(sport->port.dev, "failed to enable uart ipg clk: %d\n", ret);
-+		return ret;
-+	}
-+
-+	if (is_imx7ulp_lpuart(sport) || is_imx8qxp_lpuart(sport)) {
-+		global_addr = port->membase + UART_GLOBAL - IMX_REG_OFF;
-+		writel(UART_GLOBAL_RST, global_addr);
-+		usleep_range(RST_HW_MIN_US, RST_HW_MAX_US);
-+		writel(0, global_addr);
-+		usleep_range(RST_HW_MIN_US, RST_HW_MAX_US);
-+	}
-+
-+	clk_disable_unprepare(sport->ipg_clk);
-+	return 0;
-+}
-+
- static void lpuart_stop_tx(struct uart_port *port)
- {
- 	unsigned char temp;
-@@ -2731,6 +2773,10 @@ static int lpuart_probe(struct platform_
- 	if (ret)
- 		goto failed_attach_port;
- 
-+	ret = lpuart_hw_reset(sport);
-+	if (ret)
-+		goto failed_reset;
-+
- 	uart_get_rs485_mode(&pdev->dev, &sport->port.rs485);
- 
- 	if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX)
-@@ -2754,6 +2800,8 @@ static int lpuart_probe(struct platform_
- 
- 	return 0;
- 
-+failed_reset:
-+	uart_remove_one_port(&lpuart_reg, &sport->port);
- failed_attach_port:
- failed_irq_request:
- 	lpuart_disable_clks(sport);
diff --git a/target/linux/layerscape/patches-5.4/819-uart-0009-MLK-17133-02-tty-serial-lpuart-add-runtime-pm-suppor.patch b/target/linux/layerscape/patches-5.4/819-uart-0009-MLK-17133-02-tty-serial-lpuart-add-runtime-pm-suppor.patch
deleted file mode 100644
index 5c0329583b..0000000000
--- a/target/linux/layerscape/patches-5.4/819-uart-0009-MLK-17133-02-tty-serial-lpuart-add-runtime-pm-suppor.patch
+++ /dev/null
@@ -1,199 +0,0 @@
-From ff3d8063eed907bed728a14e1519dc659036315a Mon Sep 17 00:00:00 2001
-From: Fugang Duan <fugang.duan@nxp.com>
-Date: Wed, 11 Sep 2019 16:36:48 +0800
-Subject: [PATCH] MLK-17133-02 tty: serial: lpuart: add runtime pm support
-
-Add runtime pm support to manage lpuart clock and its power domain
-to save power in system idle and system suspend stages.
-
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
-Reviewed-by: Robin Gong <yibin.gong@nxp.com>
----
- drivers/tty/serial/fsl_lpuart.c | 80 ++++++++++++++++++++++++++++++++++++-----
- 1 file changed, 72 insertions(+), 8 deletions(-)
-
---- a/drivers/tty/serial/fsl_lpuart.c
-+++ b/drivers/tty/serial/fsl_lpuart.c
-@@ -245,6 +245,7 @@
- 
- /* Rx DMA timeout in ms, which is used to calculate Rx ring buffer size */
- #define DMA_RX_TIMEOUT		(10)
-+#define UART_AUTOSUSPEND_TIMEOUT	3000
- 
- #define DRIVER_NAME	"fsl-lpuart"
- #define DEV_NAME	"ttyLP"
-@@ -859,6 +860,20 @@ static void lpuart32_start_tx(struct uar
- 	}
- }
- 
-+static void
-+lpuart_uart_pm(struct uart_port *port, unsigned int state, unsigned int oldstate)
-+{
-+	switch (state) {
-+	case UART_PM_STATE_OFF:
-+		pm_runtime_mark_last_busy(port->dev);
-+		pm_runtime_put_autosuspend(port->dev);
-+		break;
-+	default:
-+		pm_runtime_get_sync(port->dev);
-+		break;
-+	}
-+}
-+
- /* return TIOCSER_TEMT when transmitter is not busy */
- static unsigned int lpuart_tx_empty(struct uart_port *port)
- {
-@@ -2283,6 +2298,7 @@ static const struct uart_ops lpuart_pops
- 	.break_ctl	= lpuart_break_ctl,
- 	.startup	= lpuart_startup,
- 	.shutdown	= lpuart_shutdown,
-+	.pm		= lpuart_uart_pm,
- 	.set_termios	= lpuart_set_termios,
- 	.type		= lpuart_type,
- 	.request_port	= lpuart_request_port,
-@@ -2307,6 +2323,7 @@ static const struct uart_ops lpuart32_po
- 	.break_ctl	= lpuart32_break_ctl,
- 	.startup	= lpuart32_startup,
- 	.shutdown	= lpuart32_shutdown,
-+	.pm		= lpuart_uart_pm,
- 	.set_termios	= lpuart32_set_termios,
- 	.type		= lpuart_type,
- 	.request_port	= lpuart_request_port,
-@@ -2769,6 +2786,11 @@ static int lpuart_probe(struct platform_
- 	if (ret)
- 		goto failed_irq_request;
- 
-+	pm_runtime_use_autosuspend(&pdev->dev);
-+	pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT);
-+	pm_runtime_set_active(&pdev->dev);
-+	pm_runtime_enable(&pdev->dev);
-+
- 	ret = uart_add_one_port(&lpuart_reg, &sport->port);
- 	if (ret)
- 		goto failed_attach_port;
-@@ -2803,6 +2825,9 @@ static int lpuart_probe(struct platform_
- failed_reset:
- 	uart_remove_one_port(&lpuart_reg, &sport->port);
- failed_attach_port:
-+	pm_runtime_disable(&pdev->dev);
-+	pm_runtime_set_suspended(&pdev->dev);
-+	pm_runtime_dont_use_autosuspend(&pdev->dev);
- failed_irq_request:
- 	lpuart_disable_clks(sport);
- failed_clock_enable:
-@@ -2829,15 +2854,41 @@ static int lpuart_remove(struct platform
- 	if (sport->dma_rx_chan)
- 		dma_release_channel(sport->dma_rx_chan);
- 
-+	pm_runtime_disable(&pdev->dev);
-+	pm_runtime_set_suspended(&pdev->dev);
-+	pm_runtime_dont_use_autosuspend(&pdev->dev);
- 	return 0;
- }
- 
- #ifdef CONFIG_PM_SLEEP
-+static int lpuart_runtime_suspend(struct device *dev)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct lpuart_port *sport = platform_get_drvdata(pdev);
-+
-+	lpuart_disable_clks(sport);
-+
-+	return 0;
-+};
-+
-+static int lpuart_runtime_resume(struct device *dev)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct lpuart_port *sport = platform_get_drvdata(pdev);
-+
-+	return lpuart_enable_clks(sport);
-+};
-+
- static int lpuart_suspend(struct device *dev)
- {
- 	struct lpuart_port *sport = dev_get_drvdata(dev);
- 	unsigned long temp;
- 	bool irq_wake;
-+	int ret;
-+
-+	ret = clk_prepare_enable(sport->ipg_clk);
-+	if (ret)
-+		return ret;
- 
- 	if (lpuart_is_32(sport)) {
- 		/* disable Rx/Tx and interrupts */
-@@ -2851,10 +2902,14 @@ static int lpuart_suspend(struct device
- 		writeb(temp, sport->port.membase + UARTCR2);
- 	}
- 
-+	clk_disable_unprepare(sport->ipg_clk);
-+
- 	uart_suspend_port(&lpuart_reg, &sport->port);
- 
- 	/* uart_suspend_port() might set wakeup flag */
- 	irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq));
-+	if (sport->port.suspended && !irq_wake)
-+		return 0;
- 
- 	if (sport->lpuart_dma_rx_use) {
- 		/*
-@@ -2885,9 +2940,6 @@ static int lpuart_suspend(struct device
- 		dmaengine_terminate_all(sport->dma_tx_chan);
- 	}
- 
--	if (sport->port.suspended && !irq_wake)
--		lpuart_disable_clks(sport);
--
- 	return 0;
- }
- 
-@@ -2895,9 +2947,11 @@ static int lpuart_resume(struct device *
- {
- 	struct lpuart_port *sport = dev_get_drvdata(dev);
- 	bool irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq));
-+	int ret;
- 
--	if (sport->port.suspended && !irq_wake)
--		lpuart_enable_clks(sport);
-+	ret = clk_prepare_enable(sport->ipg_clk);
-+	if (ret)
-+		return ret;
- 
- 	if (lpuart_is_32(sport))
- 		lpuart32_setup_watermark_enable(sport);
-@@ -2918,13 +2972,23 @@ static int lpuart_resume(struct device *
- 	if (lpuart_is_32(sport))
- 		lpuart32_configure(sport);
- 
-+	clk_disable_unprepare(sport->ipg_clk);
-+
- 	uart_resume_port(&lpuart_reg, &sport->port);
- 
- 	return 0;
- }
--#endif
-+static const struct dev_pm_ops lpuart_pm_ops = {
-+	SET_RUNTIME_PM_OPS(lpuart_runtime_suspend,
-+			   lpuart_runtime_resume, NULL)
-+	SET_SYSTEM_SLEEP_PM_OPS(lpuart_suspend, lpuart_resume)
-+};
-+#define SERIAL_LPUART_PM_OPS	(&lpuart_pm_ops)
- 
--static SIMPLE_DEV_PM_OPS(lpuart_pm_ops, lpuart_suspend, lpuart_resume);
-+#else /* !CONFIG_PM_SLEEP */
-+
-+#define SERIAL_LPUART_PM_OPS	NULL
-+#endif
- 
- static struct platform_driver lpuart_driver = {
- 	.probe		= lpuart_probe,
-@@ -2932,7 +2996,7 @@ static struct platform_driver lpuart_dri
- 	.driver		= {
- 		.name	= "fsl-lpuart",
- 		.of_match_table = lpuart_dt_ids,
--		.pm	= &lpuart_pm_ops,
-+		.pm	= SERIAL_LPUART_PM_OPS,
- 	},
- };
- 
diff --git a/target/linux/layerscape/patches-5.4/819-uart-0010-tty-serial-lpuart-enable-wakeup-source-for-lpuart.patch b/target/linux/layerscape/patches-5.4/819-uart-0010-tty-serial-lpuart-enable-wakeup-source-for-lpuart.patch
deleted file mode 100644
index 1f42e5cb5d..0000000000
--- a/target/linux/layerscape/patches-5.4/819-uart-0010-tty-serial-lpuart-enable-wakeup-source-for-lpuart.patch
+++ /dev/null
@@ -1,392 +0,0 @@
-From 4db59ee0d7224e0c8008534c9247480a83889034 Mon Sep 17 00:00:00 2001
-From: Fugang Duan <fugang.duan@nxp.com>
-Date: Wed, 11 Sep 2019 17:01:45 +0800
-Subject: [PATCH] tty: serial: lpuart: enable wakeup source for lpuart
-
-When use lpuart with DMA mode as wake up source, it still switch to
-cpu mode in .suspend() that enable cpu interrupts RIE and ILIE as
-wakeup source. Enable the wakeup irq bits in .suspend_noirq() and
-disable the wakeup irq bits in .resume_noirq().
-
-For DMA mode, after system resume back, it needs to setup DMA again,
-if DMA setup is failed, it switchs to CPU mode. .resume() will share
-the HW setup code with .startup(), so abstract the same code to the
-api like lpuartx_hw_setup().
-
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
----
- drivers/tty/serial/fsl_lpuart.c | 285 ++++++++++++++++++++++++++++------------
- 1 file changed, 198 insertions(+), 87 deletions(-)
-
---- a/drivers/tty/serial/fsl_lpuart.c
-+++ b/drivers/tty/serial/fsl_lpuart.c
-@@ -21,6 +21,7 @@
- #include <linux/of.h>
- #include <linux/of_device.h>
- #include <linux/of_dma.h>
-+#include <linux/pinctrl/consumer.h>
- #include <linux/pm_domain.h>
- #include <linux/pm_runtime.h>
- #include <linux/reset.h>
-@@ -1722,10 +1723,23 @@ static void lpuart_rx_dma_startup(struct
- 	}
- }
- 
-+static void lpuart_hw_setup(struct lpuart_port *sport)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&sport->port.lock, flags);
-+
-+	lpuart_setup_watermark_enable(sport);
-+
-+	lpuart_rx_dma_startup(sport);
-+	lpuart_tx_dma_startup(sport);
-+
-+	spin_unlock_irqrestore(&sport->port.lock, flags);
-+}
-+
- static int lpuart_startup(struct uart_port *port)
- {
- 	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
--	unsigned long flags;
- 	unsigned char temp;
- 
- 	/* determine FIFO size and enable FIFO mode */
-@@ -1738,14 +1752,7 @@ static int lpuart_startup(struct uart_po
- 	sport->rxfifo_size = UARTFIFO_DEPTH((temp >> UARTPFIFO_RXSIZE_OFF) &
- 					    UARTPFIFO_FIFOSIZE_MASK);
- 
--	spin_lock_irqsave(&sport->port.lock, flags);
--
--	lpuart_setup_watermark_enable(sport);
--
--	lpuart_rx_dma_startup(sport);
--	lpuart_tx_dma_startup(sport);
--
--	spin_unlock_irqrestore(&sport->port.lock, flags);
-+	lpuart_hw_setup(sport);
- 
- 	return 0;
- }
-@@ -1772,11 +1779,27 @@ static void lpuart32_configure(struct lp
- 	lpuart32_write(&sport->port, temp, UARTCTRL);
- }
- 
-+static void lpuart32_hw_setup(struct lpuart_port *sport)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&sport->port.lock, flags);
-+
-+	lpuart32_hw_disable(sport);
-+
-+	lpuart_rx_dma_startup(sport);
-+	lpuart_tx_dma_startup(sport);
-+
-+	lpuart32_setup_watermark_enable(sport);
-+	lpuart32_configure(sport);
-+
-+	spin_unlock_irqrestore(&sport->port.lock, flags);
-+}
-+
- static int lpuart32_startup(struct uart_port *port)
- {
- 	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
- 	struct tty_port *tty_port = &sport->port.state->port;
--	unsigned long flags;
- 	unsigned long temp;
- 	int ret;
- 
-@@ -1808,17 +1831,8 @@ static int lpuart32_startup(struct uart_
- 		sport->port.fifosize = sport->txfifo_size;
- 	}
- 
--	spin_lock_irqsave(&sport->port.lock, flags);
--
--	lpuart32_hw_disable(sport);
--
--	lpuart_rx_dma_startup(sport);
--	lpuart_tx_dma_startup(sport);
--
--	lpuart32_setup_watermark_enable(sport);
--	lpuart32_configure(sport);
-+	lpuart32_hw_setup(sport);
- 
--	spin_unlock_irqrestore(&sport->port.lock, flags);
- 	return 0;
- }
- 
-@@ -2879,108 +2893,205 @@ static int lpuart_runtime_resume(struct
- 	return lpuart_enable_clks(sport);
- };
- 
--static int lpuart_suspend(struct device *dev)
-+static void serial_lpuart_enable_wakeup(struct lpuart_port *sport, bool on)
- {
--	struct lpuart_port *sport = dev_get_drvdata(dev);
--	unsigned long temp;
--	bool irq_wake;
--	int ret;
--
--	ret = clk_prepare_enable(sport->ipg_clk);
--	if (ret)
--		return ret;
-+	unsigned int val;
- 
- 	if (lpuart_is_32(sport)) {
--		/* disable Rx/Tx and interrupts */
--		temp = lpuart32_read(&sport->port, UARTCTRL);
--		temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE);
--		lpuart32_write(&sport->port, temp, UARTCTRL);
-+		val = lpuart32_read(&sport->port, UARTCTRL);
-+		if (on)
-+			val |= (UARTCTRL_RIE | UARTCTRL_ILIE);
-+		else
-+			val &= ~(UARTCTRL_RIE | UARTCTRL_ILIE);
-+		lpuart32_write(&sport->port, val, UARTCTRL);
- 	} else {
--		/* disable Rx/Tx and interrupts */
--		temp = readb(sport->port.membase + UARTCR2);
--		temp &= ~(UARTCR2_TE | UARTCR2_TIE | UARTCR2_TCIE);
--		writeb(temp, sport->port.membase + UARTCR2);
-+		val = readb(sport->port.membase + UARTCR2);
-+		if (on)
-+			val |= UARTCR2_RIE;
-+		else
-+			val &= ~UARTCR2_RIE;
-+		writeb(val, sport->port.membase + UARTCR2);
- 	}
-+}
- 
--	clk_disable_unprepare(sport->ipg_clk);
-+static bool lpuart_uport_is_active(struct lpuart_port *sport)
-+{
-+	struct tty_port *port = &sport->port.state->port;
-+	struct tty_struct *tty;
-+	struct device *tty_dev;
-+	int may_wake = 0;
- 
--	uart_suspend_port(&lpuart_reg, &sport->port);
-+	tty = tty_port_tty_get(port);
-+	if (tty) {
-+		tty_dev = tty->dev;
-+		may_wake = device_may_wakeup(tty_dev);
-+		tty_kref_put(tty);
-+	}
- 
--	/* uart_suspend_port() might set wakeup flag */
--	irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq));
--	if (sport->port.suspended && !irq_wake)
--		return 0;
-+	if ((tty_port_initialized(port) && may_wake) ||
-+	    (!console_suspend_enabled && uart_console(&sport->port)))
-+		return true;
- 
--	if (sport->lpuart_dma_rx_use) {
--		/*
--		 * EDMA driver during suspend will forcefully release any
--		 * non-idle DMA channels. If port wakeup is enabled or if port
--		 * is console port or 'no_console_suspend' is set the Rx DMA
--		 * cannot resume as as expected, hence gracefully release the
--		 * Rx DMA path before suspend and start Rx DMA path on resume.
--		 */
--		if (irq_wake) {
--			lpuart_del_timer_sync(sport);
--			lpuart_dma_rx_free(&sport->port);
--		}
-+	return false;
-+}
- 
--		/* Disable Rx DMA to use UART port as wakeup source */
-+static int lpuart_suspend_noirq(struct device *dev)
-+{
-+	struct lpuart_port *sport = dev_get_drvdata(dev);
-+	bool irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq));
-+
-+	if (lpuart_uport_is_active(sport))
-+		serial_lpuart_enable_wakeup(sport, !!irq_wake);
-+
-+	pinctrl_pm_select_sleep_state(dev);
-+
-+	return 0;
-+}
-+
-+static int lpuart_resume_noirq(struct device *dev)
-+{
-+	struct lpuart_port *sport = dev_get_drvdata(dev);
-+	unsigned int val;
-+
-+	pinctrl_pm_select_default_state(dev);
-+
-+	if (lpuart_uport_is_active(sport)) {
-+		serial_lpuart_enable_wakeup(sport, false);
-+
-+		/* clear the wakeup flags */
- 		if (lpuart_is_32(sport)) {
--			temp = lpuart32_read(&sport->port, UARTBAUD);
--			lpuart32_write(&sport->port, temp & ~UARTBAUD_RDMAE,
--				       UARTBAUD);
--		} else {
--			writeb(readb(sport->port.membase + UARTCR5) &
--			       ~UARTCR5_RDMAS, sport->port.membase + UARTCR5);
-+			val = lpuart32_read(&sport->port, UARTSTAT);
-+			lpuart32_write(&sport->port, val, UARTSTAT);
- 		}
- 	}
- 
--	if (sport->lpuart_dma_tx_use) {
--		sport->dma_tx_in_progress = false;
--		dmaengine_terminate_all(sport->dma_tx_chan);
--	}
--
- 	return 0;
- }
- 
--static int lpuart_resume(struct device *dev)
-+static int lpuart_suspend(struct device *dev)
- {
- 	struct lpuart_port *sport = dev_get_drvdata(dev);
--	bool irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq));
--	int ret;
-+	unsigned long temp;
-+	unsigned long flags;
- 
--	ret = clk_prepare_enable(sport->ipg_clk);
--	if (ret)
--		return ret;
-+	uart_suspend_port(&lpuart_reg, &sport->port);
- 
--	if (lpuart_is_32(sport))
--		lpuart32_setup_watermark_enable(sport);
--	else
--		lpuart_setup_watermark_enable(sport);
-+	if (lpuart_uport_is_active(sport)) {
-+		spin_lock_irqsave(&sport->port.lock, flags);
-+		if (lpuart_is_32(sport)) {
-+			temp = lpuart32_read(&sport->port, UARTCTRL);
-+			temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE);
-+			lpuart32_write(&sport->port, temp, UARTCTRL);
-+		} else {
-+			temp = readb(sport->port.membase + UARTCR2);
-+			temp &= ~(UARTCR2_TE | UARTCR2_TIE | UARTCR2_TCIE);
-+			writeb(temp, sport->port.membase + UARTCR2);
-+		}
-+		spin_unlock_irqrestore(&sport->port.lock, flags);
- 
--	if (sport->lpuart_dma_rx_use) {
--		if (irq_wake) {
--			if (!lpuart_start_rx_dma(sport))
--				rx_dma_timer_init(sport);
--			else
--				sport->lpuart_dma_rx_use = false;
-+		if (sport->lpuart_dma_rx_use) {
-+			/*
-+			 * EDMA driver during suspend will forcefully release any
-+			 * non-idle DMA channels. If port wakeup is enabled or if port
-+			 * is console port or 'no_console_suspend' is set the Rx DMA
-+			 * cannot resume as as expected, hence gracefully release the
-+			 * Rx DMA path before suspend and start Rx DMA path on resume.
-+			 */
-+			lpuart_del_timer_sync(sport);
-+			lpuart_dma_rx_free(&sport->port);
-+
-+			/* Disable Rx DMA to use UART port as wakeup source */
-+			spin_lock_irqsave(&sport->port.lock, flags);
-+			if (lpuart_is_32(sport)) {
-+				temp = lpuart32_read(&sport->port, UARTBAUD);
-+				lpuart32_write(&sport->port, temp & ~UARTBAUD_RDMAE,
-+					       UARTBAUD);
-+			} else {
-+				writeb(readb(sport->port.membase + UARTCR5) &
-+				       ~UARTCR5_RDMAS, sport->port.membase + UARTCR5);
-+			}
-+			spin_unlock_irqrestore(&sport->port.lock, flags);
-+		}
-+
-+		if (sport->lpuart_dma_tx_use) {
-+			spin_lock_irqsave(&sport->port.lock, flags);
-+			if (lpuart_is_32(sport)) {
-+				temp = lpuart32_read(&sport->port, UARTBAUD);
-+				temp &= ~UARTBAUD_TDMAE;
-+				lpuart32_write(&sport->port, temp, UARTBAUD);
-+			} else {
-+				temp = readb(sport->port.membase + UARTCR5);
-+				temp &= ~UARTCR5_TDMAS;
-+				writeb(temp, sport->port.membase + UARTCR5);
-+			}
-+			spin_unlock_irqrestore(&sport->port.lock, flags);
-+			sport->dma_tx_in_progress = false;
-+			dmaengine_terminate_all(sport->dma_tx_chan);
- 		}
-+	} else if (pm_runtime_active(sport->port.dev)) {
-+		lpuart_disable_clks(sport);
-+		pm_runtime_disable(sport->port.dev);
-+		pm_runtime_set_suspended(sport->port.dev);
- 	}
- 
--	lpuart_tx_dma_startup(sport);
-+	return 0;
-+}
- 
--	if (lpuart_is_32(sport))
--		lpuart32_configure(sport);
-+static void lpuart_console_fixup(struct lpuart_port *sport)
-+{
-+	struct tty_port *port = &sport->port.state->port;
-+	struct uart_port *uport = &sport->port;
-+	struct ktermios termios;
- 
--	clk_disable_unprepare(sport->ipg_clk);
-+	/* i.MX7ULP enter VLLS mode that lpuart module power off and registers
-+	 * all lost no matter the port is wakeup source.
-+	 * For console port, console baud rate setting lost and print messy
-+	 * log when enable the console port as wakeup source. To avoid the
-+	 * issue happen, user should not enable uart port as wakeup source
-+	 * in VLLS mode, or restore console setting here.
-+	 */
-+	if (is_imx7ulp_lpuart(sport) && lpuart_uport_is_active(sport) &&
-+	    console_suspend_enabled && uart_console(&sport->port)) {
-+
-+		mutex_lock(&port->mutex);
-+		memset(&termios, 0, sizeof(struct ktermios));
-+		termios.c_cflag = uport->cons->cflag;
-+		if (port->tty && termios.c_cflag == 0)
-+			termios = port->tty->termios;
-+		uport->ops->set_termios(uport, &termios, NULL);
-+		mutex_unlock(&port->mutex);
-+	}
-+}
-+
-+static int lpuart_resume(struct device *dev)
-+{
-+	struct lpuart_port *sport = dev_get_drvdata(dev);
-+	int ret;
- 
-+	if (lpuart_uport_is_active(sport)) {
-+		if (lpuart_is_32(sport))
-+			lpuart32_hw_setup(sport);
-+		else
-+			lpuart_hw_setup(sport);
-+	} else if (pm_runtime_active(sport->port.dev)) {
-+		ret = lpuart_enable_clks(sport);
-+		if (ret)
-+			return ret;
-+		pm_runtime_set_active(sport->port.dev);
-+		pm_runtime_enable(sport->port.dev);
-+	}
-+
-+	lpuart_console_fixup(sport);
- 	uart_resume_port(&lpuart_reg, &sport->port);
- 
- 	return 0;
- }
-+
- static const struct dev_pm_ops lpuart_pm_ops = {
- 	SET_RUNTIME_PM_OPS(lpuart_runtime_suspend,
- 			   lpuart_runtime_resume, NULL)
-+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(lpuart_suspend_noirq,
-+				      lpuart_resume_noirq)
- 	SET_SYSTEM_SLEEP_PM_OPS(lpuart_suspend, lpuart_resume)
- };
- #define SERIAL_LPUART_PM_OPS	(&lpuart_pm_ops)
diff --git a/target/linux/layerscape/patches-5.4/819-uart-0011-serial-fsl_lpuart-enable-two-stop-bits.patch b/target/linux/layerscape/patches-5.4/819-uart-0011-serial-fsl_lpuart-enable-two-stop-bits.patch
deleted file mode 100644
index 2d4c14922a..0000000000
--- a/target/linux/layerscape/patches-5.4/819-uart-0011-serial-fsl_lpuart-enable-two-stop-bits.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 5f1a35c3f5c17cc6229873248a56784fcd03db1c Mon Sep 17 00:00:00 2001
-From: Fugang Duan <fugang.duan@nxp.com>
-Date: Fri, 27 Sep 2019 15:18:41 +0800
-Subject: [PATCH] serial: fsl_lpuart: enable two stop bits
-
-Add two stop bits support.
-User can run the command to enable two stop bits
-for test: stty  cstopb  -F /dev/ttyLPx
-
-Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
----
- drivers/tty/serial/fsl_lpuart.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/tty/serial/fsl_lpuart.c
-+++ b/drivers/tty/serial/fsl_lpuart.c
-@@ -2135,11 +2135,12 @@ lpuart32_set_termios(struct uart_port *p
- {
- 	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
- 	unsigned long flags;
--	unsigned long ctrl, old_ctrl, modem;
-+	unsigned long ctrl, old_ctrl, bd, modem;
- 	unsigned int  baud;
- 	unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
- 
- 	ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL);
-+	bd = lpuart32_read(&sport->port, UARTBAUD);
- 	modem = lpuart32_read(&sport->port, UARTMODIR);
- 	/*
- 	 * only support CS8 and CS7, and for CS7 must enable PE.
-@@ -2176,7 +2177,9 @@ lpuart32_set_termios(struct uart_port *p
- 	}
- 
- 	if (termios->c_cflag & CSTOPB)
--		termios->c_cflag &= ~CSTOPB;
-+		bd |= UARTBAUD_SBNS;
-+	else
-+		bd &= ~UARTBAUD_SBNS;
- 
- 	/* parity must be enabled when CS7 to match 8-bits format */
- 	if ((termios->c_cflag & CSIZE) == CS7)
-@@ -2246,6 +2249,7 @@ lpuart32_set_termios(struct uart_port *p
- 	lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),
- 		       UARTCTRL);
- 
-+	lpuart32_write(&sport->port, bd, UARTBAUD);
- 	lpuart32_serial_setbrg(sport, baud);
- 	lpuart32_write(&sport->port, modem, UARTMODIR);
- 	lpuart32_write(&sport->port, ctrl, UARTCTRL);
diff --git a/target/linux/layerscape/patches-5.4/819-uart-0013-LF-484-tty-serial-lpuart-support-UPIO_MEM32-for-lpua.patch b/target/linux/layerscape/patches-5.4/819-uart-0013-LF-484-tty-serial-lpuart-support-UPIO_MEM32-for-lpua.patch
deleted file mode 100644
index 522d7023ca..0000000000
--- a/target/linux/layerscape/patches-5.4/819-uart-0013-LF-484-tty-serial-lpuart-support-UPIO_MEM32-for-lpua.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 1b00d871c9aaa05583b50abb5ba7dfb4ed8bc4f1 Mon Sep 17 00:00:00 2001
-From: Peng Fan <peng.fan@nxp.com>
-Date: Mon, 16 Dec 2019 15:53:00 +0800
-Subject: [PATCH] LF-484 tty: serial: lpuart: support UPIO_MEM32 for lpuart32
-
-"earlycon" no need to specify the value string since it uses
-stdout-path parameters. However when earlycon and normal console
-are not using the same uart port, we need specify value string
-to earlycon, this is what we need to do when support dual linux
-using jailhouse hypervisor. The 2nd linux will use the uart
-of the 1st linux as earlycon.
-
-earlycon=lpuart32,mmio32,0x5a060010,115200 not work for i.MX8QXP.
-It is because lpuart32_early_console_setup not support little endian.
-
-Since the original code is to support UPIO_MEM32BE, so if not
-UPIO_MEM32, we still take it as UPIO_MEM32BE
-
-Acked-by: Fugang Duan <fugang.duan@nxp.com>
-Signed-off-by: Peng Fan <peng.fan@nxp.com>
----
- drivers/tty/serial/fsl_lpuart.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/tty/serial/fsl_lpuart.c
-+++ b/drivers/tty/serial/fsl_lpuart.c
-@@ -2617,7 +2617,9 @@ static int __init lpuart32_early_console
- 	if (!device->port.membase)
- 		return -ENODEV;
- 
--	device->port.iotype = UPIO_MEM32BE;
-+	if (device->port.iotype != UPIO_MEM32)
-+		device->port.iotype = UPIO_MEM32BE;
-+
- 	device->con->write = lpuart32_early_write;
- 	return 0;
- }
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0001-MLK-11340-26-usb-phy-add-notify-suspend-and-resume-c.patch b/target/linux/layerscape/patches-5.4/820-usb-0001-MLK-11340-26-usb-phy-add-notify-suspend-and-resume-c.patch
deleted file mode 100644
index 5057a2a01c..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0001-MLK-11340-26-usb-phy-add-notify-suspend-and-resume-c.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 7306c576fd8463f915192e68b7d0b93a24d43c9e Mon Sep 17 00:00:00 2001
-From: Peter Chen <peter.chen@freescale.com>
-Date: Mon, 16 Sep 2013 16:31:24 +0800
-Subject: [PATCH] MLK-11340-26 usb: phy: add notify suspend and resume callback
-
-They are used to notify PHY that the controller enters suspend
-or finishes resume.
-
-Signed-off-by: Peter Chen <peter.chen@freescale.com>
----
- include/linux/usb/phy.h | 24 ++++++++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/include/linux/usb/phy.h
-+++ b/include/linux/usb/phy.h
-@@ -155,6 +155,12 @@ struct usb_phy {
- 	 * manually detect the charger type.
- 	 */
- 	enum usb_charger_type (*charger_detect)(struct usb_phy *x);
-+
-+	int	(*notify_suspend)(struct usb_phy *x,
-+			enum usb_device_speed speed);
-+	int	(*notify_resume)(struct usb_phy *x,
-+			enum usb_device_speed speed);
-+
- };
- 
- /* for board-specific init logic */
-@@ -333,6 +339,24 @@ usb_phy_notify_disconnect(struct usb_phy
- 	else
- 		return 0;
- }
-+
-+static inline int usb_phy_notify_suspend
-+	(struct usb_phy *x, enum usb_device_speed speed)
-+{
-+	if (x && x->notify_suspend)
-+		return x->notify_suspend(x, speed);
-+	else
-+		return 0;
-+}
-+
-+static inline int usb_phy_notify_resume
-+	(struct usb_phy *x, enum usb_device_speed speed)
-+{
-+	if (x && x->notify_resume)
-+		return x->notify_resume(x, speed);
-+	else
-+		return 0;
-+}
- 
- /* notifiers */
- static inline int
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0002-MLK-14285-1-usb-phy-add-usb-mode-for-usb_phy.patch b/target/linux/layerscape/patches-5.4/820-usb-0002-MLK-14285-1-usb-phy-add-usb-mode-for-usb_phy.patch
deleted file mode 100644
index d61388cfa5..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0002-MLK-14285-1-usb-phy-add-usb-mode-for-usb_phy.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From ec89a34069e9d33dd8f809c02a12ffb619d67e1f Mon Sep 17 00:00:00 2001
-From: Li Jun <jun.li@nxp.com>
-Date: Wed, 12 Apr 2017 05:31:17 +0800
-Subject: [PATCH] MLK-14285-1 usb: phy: add usb mode for usb_phy
-
-USB phy driver may need to know the current working mode of
-the controller, and does some different settings according to
-host mode or device mode.
-
-Signed-off-by: Li Jun <jun.li@nxp.com>
-(cherry picked from commit 2286cb30feedd6f4a5cb82a0f0af5aa3a04ab698)
-Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
-Signed-off-by: Srikanth Krishnakar <Srikanth_Krishnakar@mentor.com>
----
- include/linux/usb/phy.h | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
---- a/include/linux/usb/phy.h
-+++ b/include/linux/usb/phy.h
-@@ -63,6 +63,13 @@ enum usb_otg_state {
- 	OTG_STATE_A_VBUS_ERR,
- };
- 
-+/* The usb role of phy to be working with */
-+enum usb_current_mode {
-+	CUR_USB_MODE_NONE,
-+	CUR_USB_MODE_HOST,
-+	CUR_USB_MODE_DEVICE,
-+};
-+
- struct usb_phy;
- struct usb_otg;
- 
-@@ -161,6 +168,9 @@ struct usb_phy {
- 	int	(*notify_resume)(struct usb_phy *x,
- 			enum usb_device_speed speed);
- 
-+	int	(*set_mode)(struct usb_phy *x,
-+			enum usb_current_mode mode);
-+
- };
- 
- /* for board-specific init logic */
-@@ -219,6 +229,15 @@ usb_phy_vbus_off(struct usb_phy *x)
- 	return x->set_vbus(x, false);
- }
- 
-+static inline int
-+usb_phy_set_mode(struct usb_phy *x, enum usb_current_mode mode)
-+{
-+	if (!x || !x->set_mode)
-+		return 0;
-+
-+	return x->set_mode(x, mode);
-+}
-+
- /* for usb host and peripheral controller drivers */
- #if IS_ENABLED(CONFIG_USB_PHY)
- extern struct usb_phy *usb_get_phy(enum usb_phy_type type);
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0003-usb-phy-show-USB-charger-type-for-user.patch b/target/linux/layerscape/patches-5.4/820-usb-0003-usb-phy-show-USB-charger-type-for-user.patch
deleted file mode 100644
index c2e85c096b..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0003-usb-phy-show-USB-charger-type-for-user.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 8eaa50485af15a4e1cc0c7c04f5ce3916e712ae1 Mon Sep 17 00:00:00 2001
-From: Peter Chen <peter.chen@nxp.com>
-Date: Wed, 6 Nov 2019 17:24:29 +0800
-Subject: [PATCH] usb: phy: show USB charger type for user
-
-Current USB charger framework only shows charger state for user, but the
-user may also need charger type for further use, add support for it.
-
-Signed-off-by: Peter Chen <peter.chen@nxp.com>
----
- drivers/usb/phy/phy.c | 13 ++++++++++++-
- 1 file changed, 12 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/phy/phy.c
-+++ b/drivers/usb/phy/phy.c
-@@ -34,6 +34,14 @@ struct phy_devm {
- 	struct notifier_block *nb;
- };
- 
-+static const char *const usb_chger_type[] = {
-+	[UNKNOWN_TYPE]			= "USB_CHARGER_UNKNOWN_TYPE",
-+	[SDP_TYPE]			= "USB_CHARGER_SDP_TYPE",
-+	[CDP_TYPE]			= "USB_CHARGER_CDP_TYPE",
-+	[DCP_TYPE]			= "USB_CHARGER_DCP_TYPE",
-+	[ACA_TYPE]			= "USB_CHARGER_ACA_TYPE",
-+};
-+
- static struct usb_phy *__usb_find_phy(struct list_head *list,
- 	enum usb_phy_type type)
- {
-@@ -98,7 +106,8 @@ static void usb_phy_notify_charger_work(
- {
- 	struct usb_phy *usb_phy = container_of(work, struct usb_phy, chg_work);
- 	char uchger_state[50] = { 0 };
--	char *envp[] = { uchger_state, NULL };
-+	char uchger_type[50] = { 0 };
-+	char *envp[] = { uchger_state, uchger_type, NULL };
- 	unsigned int min, max;
- 
- 	switch (usb_phy->chg_state) {
-@@ -122,6 +131,8 @@ static void usb_phy_notify_charger_work(
- 		return;
- 	}
- 
-+	snprintf(uchger_type, ARRAY_SIZE(uchger_type),
-+		 "USB_CHARGER_TYPE=%s", usb_chger_type[usb_phy->chg_type]);
- 	kobject_uevent_env(&usb_phy->dev->kobj, KOBJ_CHANGE, envp);
- }
- 
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0004-usb-dwc3-use-suspend-clock-from-dt-to-set-power-down.patch b/target/linux/layerscape/patches-5.4/820-usb-0004-usb-dwc3-use-suspend-clock-from-dt-to-set-power-down.patch
deleted file mode 100644
index a60167e945..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0004-usb-dwc3-use-suspend-clock-from-dt-to-set-power-down.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 0d4749abb6f7d042643ba1aa27a7388e8290b6f5 Mon Sep 17 00:00:00 2001
-From: Li Jun <jun.li@nxp.com>
-Date: Tue, 16 Apr 2019 14:02:38 +0800
-Subject: [PATCH] usb: dwc3: use suspend clock from dt to set power down scale
-
-Since the new dwc3 use bulk clks including the suspend clk, so we can
-use it to calculate the power down scale value.
-
-Acked-by: Peter Chen <peter.chen@nxp.com>
-Signed-off-by: Li Jun <jun.li@nxp.com>
----
- drivers/usb/dwc3/core.c | 21 +++++++++++++++++++++
- drivers/usb/dwc3/core.h |  1 +
- 2 files changed, 22 insertions(+)
-
---- a/drivers/usb/dwc3/core.c
-+++ b/drivers/usb/dwc3/core.c
-@@ -900,6 +900,25 @@ static void dwc3_set_incr_burst_type(str
- 	dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, cfg);
- }
- 
-+static void dwc3_set_power_down_clk_scale(struct dwc3 *dwc)
-+{
-+	u32 reg, scale;
-+
-+	if (dwc->num_clks == 0)
-+		return;
-+
-+	/*
-+	 * The power down scale field specifies how many suspend_clk
-+	 * periods fit into a 16KHz clock period. When performing
-+	 * the division, round up the remainder.
-+	 */
-+	scale = DIV_ROUND_UP(clk_get_rate(dwc->clks[2].clk), 16384);
-+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
-+	reg &= ~(DWC3_GCTL_PWRDNSCALE_MASK);
-+	reg |= DWC3_GCTL_PWRDNSCALE(scale);
-+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
-+}
-+
- /**
-  * dwc3_core_init - Low-level initialization of DWC3 Core
-  * @dwc: Pointer to our controller context structure
-@@ -924,6 +943,8 @@ static int dwc3_core_init(struct dwc3 *d
- 			dwc->maximum_speed = USB_SPEED_HIGH;
- 	}
- 
-+	dwc3_set_power_down_clk_scale(dwc);
-+
- 	ret = dwc3_phy_setup(dwc);
- 	if (ret)
- 		goto err0;
---- a/drivers/usb/dwc3/core.h
-+++ b/drivers/usb/dwc3/core.h
-@@ -224,6 +224,7 @@
- 
- /* Global Configuration Register */
- #define DWC3_GCTL_PWRDNSCALE(n)	((n) << 19)
-+#define DWC3_GCTL_PWRDNSCALE_MASK	DWC3_GCTL_PWRDNSCALE(0x1fff)
- #define DWC3_GCTL_U2RSTECN	BIT(16)
- #define DWC3_GCTL_RAMCLKSEL(x)	(((x) & DWC3_GCTL_CLK_MASK) << 6)
- #define DWC3_GCTL_CLK_BUS	(0)
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0005-usb-dwc3-add-otg-properties-update.patch b/target/linux/layerscape/patches-5.4/820-usb-0005-usb-dwc3-add-otg-properties-update.patch
deleted file mode 100644
index fc4c853cb9..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0005-usb-dwc3-add-otg-properties-update.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 504c440dd9c391ed97299a9d4b2e41b3ac3b6211 Mon Sep 17 00:00:00 2001
-From: Peter Chen <peter.chen@nxp.com>
-Date: Mon, 28 Jan 2019 15:15:11 +0800
-Subject: [PATCH] usb: dwc3: add otg properties update
-
-During the USB certification CV9 test, if we report OTG descriptor
-to test suite, it will require doing OTG test, but in fact, it does
-not support OTG-compliance in dwc3 driver.
-
-Signed-off-by: Peter Chen <peter.chen@nxp.com>
----
- drivers/usb/dwc3/core.c   | 11 +++++++++++
- drivers/usb/dwc3/core.h   |  2 ++
- drivers/usb/dwc3/gadget.c |  4 ++++
- 3 files changed, 17 insertions(+)
-
---- a/drivers/usb/dwc3/core.c
-+++ b/drivers/usb/dwc3/core.c
-@@ -1269,6 +1269,17 @@ static void dwc3_get_properties(struct d
- 
- 	dwc->maximum_speed = usb_get_maximum_speed(dev);
- 	dwc->dr_mode = usb_get_dr_mode(dev);
-+	if (dwc->dr_mode == USB_DR_MODE_OTG) {
-+		dwc->otg_caps.otg_rev = 0x0300;
-+		dwc->otg_caps.hnp_support = true;
-+		dwc->otg_caps.srp_support = true;
-+		dwc->otg_caps.adp_support = true;
-+
-+		/* Update otg capabilities by DT properties */
-+		of_usb_update_otg_caps(dev->of_node,
-+				       &dwc->otg_caps);
-+	}
-+
- 	dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node);
- 
- 	dwc->sysdev_is_parent = device_property_read_bool(dev,
---- a/drivers/usb/dwc3/core.h
-+++ b/drivers/usb/dwc3/core.h
-@@ -955,6 +955,7 @@ struct dwc3_scratchpad_array {
-  * @nr_scratch: number of scratch buffers
-  * @u1u2: only used on revisions <1.83a for workaround
-  * @maximum_speed: maximum speed requested (mainly for testing purposes)
-+ * @otg_caps: the OTG capabilities from hardware point
-  * @revision: revision register contents
-  * @version_type: VERSIONTYPE register contents, a sub release of a revision
-  * @dr_mode: requested mode of operation
-@@ -1111,6 +1112,7 @@ struct dwc3 {
- 	u32			nr_scratch;
- 	u32			u1u2;
- 	u32			maximum_speed;
-+	struct usb_otg_caps	otg_caps;
- 
- 	/*
- 	 * All 3.1 IP version constants are greater than the 3.0 IP
---- a/drivers/usb/dwc3/gadget.c
-+++ b/drivers/usb/dwc3/gadget.c
-@@ -3655,6 +3655,10 @@ int dwc3_gadget_init(struct dwc3 *dwc)
- 	dwc->gadget.sg_supported	= true;
- 	dwc->gadget.name		= "dwc3-gadget";
- 	dwc->gadget.lpm_capable		= true;
-+	dwc->gadget.is_otg		= (dwc->dr_mode == USB_DR_MODE_OTG) &&
-+					  (dwc->otg_caps.hnp_support ||
-+					   dwc->otg_caps.srp_support ||
-+					   dwc->otg_caps.adp_support);
- 
- 	/*
- 	 * FIXME We might be setting max_speed to <SUPER, however versions
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0006-usb-dwc3-drd-add-usb-role-switch-class-support-for-d.patch b/target/linux/layerscape/patches-5.4/820-usb-0006-usb-dwc3-drd-add-usb-role-switch-class-support-for-d.patch
deleted file mode 100644
index 4e6f128695..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0006-usb-dwc3-drd-add-usb-role-switch-class-support-for-d.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From 8595748e58885439c7e18a11a94702378bff3b02 Mon Sep 17 00:00:00 2001
-From: Li Jun <jun.li@nxp.com>
-Date: Sun, 27 Jan 2019 19:40:03 +0800
-Subject: [PATCH] usb: dwc3: drd: add usb role switch class support for dual
- role swap
-
-Register a usb_role_switch for dual role swap if the property
-"usb-role-switch" is present.
-
-Signed-off-by: Li Jun <jun.li@nxp.com>
----
- drivers/usb/dwc3/core.h |  2 ++
- drivers/usb/dwc3/drd.c  | 47 ++++++++++++++++++++++++++++++++++++++++++++++-
- 2 files changed, 48 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/dwc3/core.h
-+++ b/drivers/usb/dwc3/core.h
-@@ -25,6 +25,7 @@
- #include <linux/usb/ch9.h>
- #include <linux/usb/gadget.h>
- #include <linux/usb/otg.h>
-+#include <linux/usb/role.h>
- #include <linux/ulpi/interface.h>
- 
- #include <linux/phy/phy.h>
-@@ -1096,6 +1097,7 @@ struct dwc3 {
- 	void __iomem		*regs;
- 	size_t			regs_size;
- 
-+	struct usb_role_switch	*role_switch;
- 	enum usb_dr_mode	dr_mode;
- 	u32			current_dr_role;
- 	u32			desired_dr_role;
---- a/drivers/usb/dwc3/drd.c
-+++ b/drivers/usb/dwc3/drd.c
-@@ -476,6 +476,43 @@ static struct extcon_dev *dwc3_get_extco
- 	return edev;
- }
- 
-+static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role)
-+{
-+	u32 mode;
-+
-+	switch (role) {
-+	case USB_ROLE_HOST:
-+		mode = DWC3_GCTL_PRTCAP_HOST;
-+		break;
-+	case USB_ROLE_DEVICE:
-+		mode = DWC3_GCTL_PRTCAP_DEVICE;
-+		break;
-+	default:
-+		return 0;
-+	};
-+
-+	dwc3_set_mode(dev_get_drvdata(dev), mode);
-+	return 0;
-+}
-+
-+static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
-+{
-+	struct dwc3 *dwc = dev_get_drvdata(dev);
-+	unsigned long flags;
-+	enum usb_role role;
-+
-+	spin_lock_irqsave(&dwc->lock, flags);
-+	role = dwc->current_dr_role;
-+	spin_unlock_irqrestore(&dwc->lock, flags);
-+
-+	return role;
-+}
-+
-+static const struct usb_role_switch_desc dwc3_role_switch = {
-+	.set = dwc3_usb_role_switch_set,
-+	.get = dwc3_usb_role_switch_get,
-+};
-+
- int dwc3_drd_init(struct dwc3 *dwc)
- {
- 	int ret, irq;
-@@ -484,7 +521,12 @@ int dwc3_drd_init(struct dwc3 *dwc)
- 	if (IS_ERR(dwc->edev))
- 		return PTR_ERR(dwc->edev);
- 
--	if (dwc->edev) {
-+	if (device_property_read_bool(dwc->dev, "usb-role-switch")) {
-+		dwc->role_switch = usb_role_switch_register(dwc->dev,
-+							    &dwc3_role_switch);
-+		if (IS_ERR(dwc->role_switch))
-+			return PTR_ERR(dwc->role_switch);
-+	} else if (dwc->edev) {
- 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
- 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
- 					       &dwc->edev_nb);
-@@ -531,6 +573,9 @@ void dwc3_drd_exit(struct dwc3 *dwc)
- {
- 	unsigned long flags;
- 
-+	if (dwc->role_switch)
-+		usb_role_switch_unregister(dwc->role_switch);
-+
- 	if (dwc->edev)
- 		extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST,
- 					   &dwc->edev_nb);
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0008-usb-dwc3-set-fwnode-for-role-switch.patch b/target/linux/layerscape/patches-5.4/820-usb-0008-usb-dwc3-set-fwnode-for-role-switch.patch
deleted file mode 100644
index 4da20802b2..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0008-usb-dwc3-set-fwnode-for-role-switch.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 96f35f42495918262455a6208d37e74609ae2c97 Mon Sep 17 00:00:00 2001
-From: Li Jun <jun.li@nxp.com>
-Date: Mon, 19 Aug 2019 10:29:07 +0800
-Subject: [PATCH] usb: dwc3: set fwnode for role switch
-
-As the usb role switch use device connection which uses the fwnode
-of dwc3 for match, so set the role switch fwnode to be the fwnode
-of dwc3.
-
-Signed-off-by: Li Jun <jun.li@nxp.com>
----
- drivers/usb/dwc3/drd.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/dwc3/drd.c
-+++ b/drivers/usb/dwc3/drd.c
-@@ -508,7 +508,7 @@ static enum usb_role dwc3_usb_role_switc
- 	return role;
- }
- 
--static const struct usb_role_switch_desc dwc3_role_switch = {
-+static struct usb_role_switch_desc dwc3_role_switch = {
- 	.set = dwc3_usb_role_switch_set,
- 	.get = dwc3_usb_role_switch_get,
- };
-@@ -522,6 +522,7 @@ int dwc3_drd_init(struct dwc3 *dwc)
- 		return PTR_ERR(dwc->edev);
- 
- 	if (device_property_read_bool(dwc->dev, "usb-role-switch")) {
-+		dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
- 		dwc->role_switch = usb_role_switch_register(dwc->dev,
- 							    &dwc3_role_switch);
- 		if (IS_ERR(dwc->role_switch))
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0009-usb-dwc3-Add-workaround-for-host-mode-VBUS-glitch-wh.patch b/target/linux/layerscape/patches-5.4/820-usb-0009-usb-dwc3-Add-workaround-for-host-mode-VBUS-glitch-wh.patch
deleted file mode 100644
index 82e2a25e2d..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0009-usb-dwc3-Add-workaround-for-host-mode-VBUS-glitch-wh.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From 61d471c8da972c7ebbaf63779bf8100ee1ec54eb Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Wed, 16 Jan 2019 13:23:17 +0800
-Subject: [PATCH] usb: dwc3: Add workaround for host mode VBUS glitch when boot
-
-When DWC3 is set to host mode by programming register DWC3_GCTL, VBUS
-(or its control signal) will be turned on immediately on related Root Hub
-ports. Then, the VBUS is turned off for a little while(15us) when do xhci
-reset (conducted by xhci driver) and back to normal finally, we can
-observe a negative glitch of related signal happen.
-
-This VBUS glitch might cause some USB devices enumeration fail if kernel
-boot with them connected. Such as LS1012AFWRY/LS1043ARDB/LX2160AQDS
-/LS1088ARDB with Kingston 16GB USB2.0/Kingston USB3.0/JetFlash Transcend
-4GB USB2.0 drives. The fail cases include enumerated as full-speed device
-or report wrong device descriptor, etc.
-
-One SW workaround which can fix this is by programing all xhci PORTSC[PP]
-to 0 to turn off VBUS immediately after setting host mode in DWC3 driver
-(per signal measurement result, it will be too late to do it in
-xhci-plat.c or xhci.c). Then, after xhci reset complete in xhci driver,
-PORTSC[PP]s' value will back to 1 automatically and VBUS on at that time,
-no glitch happen and normal enumeration process has no impact.
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-Reviewed-by: Peter Chen <peter.chen@nxp.com>
----
- drivers/usb/dwc3/core.c |  3 +++
- drivers/usb/dwc3/core.h |  3 +++
- drivers/usb/dwc3/host.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 54 insertions(+)
-
---- a/drivers/usb/dwc3/core.c
-+++ b/drivers/usb/dwc3/core.c
-@@ -1364,6 +1364,9 @@ static void dwc3_get_properties(struct d
- 	dwc->dis_split_quirk = device_property_read_bool(dev,
- 				"snps,dis-split-quirk");
- 
-+	dwc->host_vbus_glitches = device_property_read_bool(dev,
-+				"snps,host-vbus-glitches");
-+
- 	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
- 	dwc->tx_de_emphasis = tx_de_emphasis;
- 
---- a/drivers/usb/dwc3/core.h
-+++ b/drivers/usb/dwc3/core.h
-@@ -1048,6 +1048,8 @@ struct dwc3_scratchpad_array {
-  * 	3	- Reserved
-  * @dis_metastability_quirk: set to disable metastability quirk.
-  * @dis_split_quirk: set to disable split boundary.
-+ * @host_vbus_glitches: set to avoid vbus glitch during
-+ *                      xhci reset.
-  * @imod_interval: set the interrupt moderation interval in 250ns
-  *                 increments or 0 to disable.
-  */
-@@ -1243,6 +1245,8 @@ struct dwc3 {
- 
- 	unsigned		dis_split_quirk:1;
- 
-+	unsigned		host_vbus_glitches:1;
-+
- 	u16			imod_interval;
- };
- 
---- a/drivers/usb/dwc3/host.c
-+++ b/drivers/usb/dwc3/host.c
-@@ -9,8 +9,49 @@
- 
- #include <linux/platform_device.h>
- 
-+#include "../host/xhci.h"
-+
- #include "core.h"
- 
-+
-+#define XHCI_HCSPARAMS1		0x4
-+#define XHCI_PORTSC_BASE	0x400
-+
-+/*
-+ * dwc3_power_off_all_roothub_ports - Power off all Root hub ports
-+ * @dwc3: Pointer to our controller context structure
-+ */
-+static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc)
-+{
-+	int i, port_num;
-+	u32 reg, op_regs_base, offset;
-+	void __iomem *xhci_regs;
-+
-+	/* xhci regs is not mapped yet, do it temperary here */
-+	if (dwc->xhci_resources[0].start) {
-+		xhci_regs = ioremap(dwc->xhci_resources[0].start,
-+				DWC3_XHCI_REGS_END);
-+		if (IS_ERR(xhci_regs)) {
-+			dev_err(dwc->dev, "Failed to ioremap xhci_regs\n");
-+			return;
-+		}
-+
-+		op_regs_base = HC_LENGTH(readl(xhci_regs));
-+		reg = readl(xhci_regs + XHCI_HCSPARAMS1);
-+		port_num = HCS_MAX_PORTS(reg);
-+
-+		for (i = 1; i <= port_num; i++) {
-+			offset = op_regs_base + XHCI_PORTSC_BASE + 0x10*(i-1);
-+			reg = readl(xhci_regs + offset);
-+			reg &= ~PORT_POWER;
-+			writel(reg, xhci_regs + offset);
-+		}
-+
-+		iounmap(xhci_regs);
-+	} else
-+		dev_err(dwc->dev, "xhci base reg invalid\n");
-+}
-+
- static int dwc3_host_get_irq(struct dwc3 *dwc)
- {
- 	struct platform_device	*dwc3_pdev = to_platform_device(dwc->dev);
-@@ -50,6 +91,13 @@ int dwc3_host_init(struct dwc3 *dwc)
- 	struct platform_device	*dwc3_pdev = to_platform_device(dwc->dev);
- 	int			prop_idx = 0;
- 
-+	/*
-+	 * We have to power off all Root hub ports immediately after DWC3 set
-+	 * to host mode to avoid VBUS glitch happen when xhci get reset later.
-+	 */
-+	if (dwc->host_vbus_glitches)
-+		dwc3_power_off_all_roothub_ports(dwc);
-+
- 	irq = dwc3_host_get_irq(dwc);
- 	if (irq < 0)
- 		return irq;
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0010-MLK-22675-usb-dwc3-host-disable-park-mode.patch b/target/linux/layerscape/patches-5.4/820-usb-0010-MLK-22675-usb-dwc3-host-disable-park-mode.patch
deleted file mode 100644
index 0e6a9278d7..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0010-MLK-22675-usb-dwc3-host-disable-park-mode.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From c5324b25fe98c7a4784248b53a75720b226436c2 Mon Sep 17 00:00:00 2001
-From: Li Jun <jun.li@nxp.com>
-Date: Tue, 29 Oct 2019 17:40:25 +0800
-Subject: [PATCH] MLK-22675 usb: dwc3: host: disable park mode
-
-- Advantage of park mode
-  When only a single Async endpoint is active.
-
-- Behavior of park mode
-  1. The controller prefetches data/TRBs to do 3 * burst_size worth
-     of packets.
-  2. When park mode is disabled there will be some delay between
-     bursts on the USB. This can be avoided if park mode is enabled
-     in cases of only one endpoint is active.
-  3. But this delay is significant only with systems of large
-     latencies.
-  4. We have noticed that in cases where a device NAKs often, it
-     tends to bring down the performance for a single endpoint case.
-
-- Issue on "park mode"
-  1. LSP (List Processor) goes in and out of park mode irrespective
-     of the fact that there are more endpoints active. #LSP consider
-     that there is only one endpoint active.
-  2. This causes master scheduler and transaction handlers to think
-     that they are in park mode even though they are not. This is
-     because request to transaction handlers, generated by HSCH is
-     in park mode when the request is made
-  3. This causes a case where the master scheduler calculates wrongly
-     the number of TRB cache space available.
-  4. Because of the wrongly calculated number of TRB spaces, the core
-     fetches more TRBS than there is space for.
-  5. This causes overwriting the TRB cache area into the TRQ cache
-     area which is next to the TRB cache area.
-  6. This causes invalidating an entry in the TRQ
-  7. This causes transaction handlers to ignore a request in the TRQ
-     which it should have processed.
-  8. This causes the main scheduler to hang because it is waiting for
-     status from transaction handler.
-  9. This causes host controller to hang.
-
-- Work Around
-  Disabling park mode for super speed by setting GUCTL1[17] to be 1.
-
-The STAR number is 9001415732, which is target to be released around
-May,2020.
-
-Reviewed-by: Peter Chen <peter.chen@nxp.com>
-Reviewed-by: Ran Wang <ran.wang_1@nxp.com>
-Signed-off-by: Li Jun <jun.li@nxp.com>
----
- drivers/usb/dwc3/core.c | 15 +++++++++++++++
- drivers/usb/dwc3/core.h |  1 +
- 2 files changed, 16 insertions(+)
-
---- a/drivers/usb/dwc3/core.c
-+++ b/drivers/usb/dwc3/core.c
-@@ -1039,6 +1039,21 @@ static int dwc3_core_init(struct dwc3 *d
- 		reg |= DWC3_GUCTL_HSTINAUTORETRY;
- 
- 		dwc3_writel(dwc->regs, DWC3_GUCTL, reg);
-+
-+		/*
-+		 * Disable Park Mode for super speed:
-+		 * Park mode is used in host mode when only a single async
-+		 * endpoint is active, but which has a known issue cause
-+		 * USB3.0 HC may die when read and write at the same time,
-+		 * considering the advantages of this mode are minimal,
-+		 * this issue only impacts super speed and exist on all IP
-+		 * versions, disable it for SS, Synopsys will release a formal
-+		 * STAR 9001415732, and disable it by default in next IP
-+		 * release.
-+		 */
-+		reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
-+		reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS;
-+		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
- 	}
- 
- 	/*
---- a/drivers/usb/dwc3/core.h
-+++ b/drivers/usb/dwc3/core.h
-@@ -255,6 +255,7 @@
- #define DWC3_GUCTL1_PARKMODE_DISABLE_SS	BIT(17)
- #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS	BIT(28)
- #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW	BIT(24)
-+#define DWC3_GUCTL1_PARKMODE_DISABLE_SS	BIT(17)
- 
- /* Global Status Register */
- #define DWC3_GSTS_OTG_IP	BIT(10)
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0011-usb-dwc3-Add-cache-type-configuration-support.patch b/target/linux/layerscape/patches-5.4/820-usb-0011-usb-dwc3-Add-cache-type-configuration-support.patch
deleted file mode 100644
index 7c9a153aec..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0011-usb-dwc3-Add-cache-type-configuration-support.patch
+++ /dev/null
@@ -1,151 +0,0 @@
-From 63d47233f18ab6bb880cc4005a373a55c8364e0b Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Fri, 22 Nov 2019 14:17:32 +0800
-Subject: [PATCH] usb: dwc3: Add cache type configuration support
-
-This feature is telling how to configure cache type on 4 different
-transfer types: Data Read, Desc Read, Data Write and Desc write. For each
-transfer type, controller has a 4-bit register field to enable different
-cache type. Quoted from DWC3 data book Table 6-5 Cache Type Bit Assignments:
-----------------------------------------------------------------
-MBUS_TYPE| bit[3]       |bit[2]       |bit[1]     |bit[0]
-----------------------------------------------------------------
-AHB      |Cacheable     |Bufferable   |Privilegge |Data
-AXI3     |Write Allocate|Read Allocate|Cacheable  |Bufferable
-AXI4     |Allocate Other|Allocate     |Modifiable |Bufferable
-AXI4     |Other Allocate|Allocate     |Modifiable |Bufferable
-Native   |Same as AXI   |Same as AXI  |Same as AXI|Same as AXI
-----------------------------------------------------------------
-Note: The AHB, AXI3, AXI4, and PCIe busses use different names for certain
-signals, which have the same meaning:
-  Bufferable = Posted
-  Cacheable = Modifiable = Snoop (negation of No Snoop)
-
-In most cases, driver support is not required unless the default values of
-registers are not correct *and* DWC3 node has enabled dma-coherent. So far we
-have observed USB device detect failure on some Layerscape platforms if this
-programming was not applied.
-
-Related struct:
-struct dwc3_cache_type {
-	u8 transfer_type_datard;
-	u8 transfer_type_descrd;
-	u8 transfer_type_datawr;
-	u8 transfer_type_descwr;
-};
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-Reviewed-by: Jun Li <jun.li@nxp.com>
----
- drivers/usb/dwc3/core.c | 61 ++++++++++++++++++++++++++++++++++++++++++++-----
- drivers/usb/dwc3/core.h | 15 ++++++++++++
- 2 files changed, 70 insertions(+), 6 deletions(-)
-
---- a/drivers/usb/dwc3/core.c
-+++ b/drivers/usb/dwc3/core.c
-@@ -919,6 +919,54 @@ static void dwc3_set_power_down_clk_scal
- 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
- }
- 
-+#ifdef CONFIG_OF
-+struct dwc3_cache_type {
-+	u8 transfer_type_datard;
-+	u8 transfer_type_descrd;
-+	u8 transfer_type_datawr;
-+	u8 transfer_type_descwr;
-+};
-+
-+static const struct dwc3_cache_type layerscape_dwc3_cache_type = {
-+	.transfer_type_datard = 2,
-+	.transfer_type_descrd = 2,
-+	.transfer_type_datawr = 2,
-+	.transfer_type_descwr = 2,
-+};
-+
-+/**
-+ * dwc3_set_cache_type - Configure cache type registers
-+ * @dwc: Pointer to our controller context structure
-+ */
-+static void dwc3_set_cache_type(struct dwc3 *dwc)
-+{
-+	u32 tmp, reg;
-+	const struct dwc3_cache_type *cache_type =
-+		device_get_match_data(dwc->dev);
-+
-+	if (cache_type) {
-+		reg = dwc3_readl(dwc->regs,  DWC3_GSBUSCFG0);
-+		tmp = reg;
-+
-+		reg &= ~DWC3_GSBUSCFG0_DATARD(~0);
-+		reg |= DWC3_GSBUSCFG0_DATARD(cache_type->transfer_type_datard);
-+
-+		reg &= ~DWC3_GSBUSCFG0_DESCRD(~0);
-+		reg |= DWC3_GSBUSCFG0_DESCRD(cache_type->transfer_type_descrd);
-+
-+		reg &= ~DWC3_GSBUSCFG0_DATAWR(~0);
-+		reg |= DWC3_GSBUSCFG0_DATAWR(cache_type->transfer_type_datawr);
-+
-+		reg &= ~DWC3_GSBUSCFG0_DESCWR(~0);
-+		reg |= DWC3_GSBUSCFG0_DESCWR(cache_type->transfer_type_descwr);
-+
-+		if (tmp != reg)
-+			dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg);
-+	}
-+}
-+#endif
-+
-+
- /**
-  * dwc3_core_init - Low-level initialization of DWC3 Core
-  * @dwc: Pointer to our controller context structure
-@@ -979,6 +1027,10 @@ static int dwc3_core_init(struct dwc3 *d
- 
- 	dwc3_set_incr_burst_type(dwc);
- 
-+#ifdef CONFIG_OF
-+	dwc3_set_cache_type(dwc);
-+#endif
-+
- 	usb_phy_set_suspend(dwc->usb2_phy, 0);
- 	usb_phy_set_suspend(dwc->usb3_phy, 0);
- 	ret = phy_power_on(dwc->usb2_generic_phy);
-@@ -1932,12 +1984,9 @@ static const struct dev_pm_ops dwc3_dev_
- 
- #ifdef CONFIG_OF
- static const struct of_device_id of_dwc3_match[] = {
--	{
--		.compatible = "snps,dwc3"
--	},
--	{
--		.compatible = "synopsys,dwc3"
--	},
-+	{ .compatible = "fsl,layerscape-dwc3", .data = &layerscape_dwc3_cache_type, },
-+	{ .compatible = "snps,dwc3" },
-+	{ .compatible = "synopsys,dwc3"	},
- 	{ },
- };
- MODULE_DEVICE_TABLE(of, of_dwc3_match);
---- a/drivers/usb/dwc3/core.h
-+++ b/drivers/usb/dwc3/core.h
-@@ -167,6 +167,21 @@
- /* Bit fields */
- 
- /* Global SoC Bus Configuration INCRx Register 0 */
-+#ifdef CONFIG_OF
-+#define DWC3_GSBUSCFG0_DATARD_SHIFT	28
-+#define DWC3_GSBUSCFG0_DATARD(n)	(((n) & 0xf)		\
-+			<< DWC3_GSBUSCFG0_DATARD_SHIFT)
-+#define DWC3_GSBUSCFG0_DESCRD_SHIFT	24
-+#define DWC3_GSBUSCFG0_DESCRD(n)	(((n) & 0xf)		\
-+			<< DWC3_GSBUSCFG0_DESCRD_SHIFT)
-+#define DWC3_GSBUSCFG0_DATAWR_SHIFT	20
-+#define DWC3_GSBUSCFG0_DATAWR(n)	(((n) & 0xf)		\
-+			<< DWC3_GSBUSCFG0_DATAWR_SHIFT)
-+#define DWC3_GSBUSCFG0_DESCWR_SHIFT	16
-+#define DWC3_GSBUSCFG0_DESCWR(n)	(((n) & 0xf)		\
-+			<< DWC3_GSBUSCFG0_DESCWR_SHIFT)
-+#endif
-+
- #define DWC3_GSBUSCFG0_INCR256BRSTENA	(1 << 7) /* INCR256 burst */
- #define DWC3_GSBUSCFG0_INCR128BRSTENA	(1 << 6) /* INCR128 burst */
- #define DWC3_GSBUSCFG0_INCR64BRSTENA	(1 << 5) /* INCR64 burst */
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0012-MLK-11340-40-usb-whitelist-update-otg-eh-s-TPL-for-f.patch b/target/linux/layerscape/patches-5.4/820-usb-0012-MLK-11340-40-usb-whitelist-update-otg-eh-s-TPL-for-f.patch
deleted file mode 100644
index 259af8ecbc..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0012-MLK-11340-40-usb-whitelist-update-otg-eh-s-TPL-for-f.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From 93cd22091be5d549fb5b0ec78955c2ec272a52e5 Mon Sep 17 00:00:00 2001
-From: Peter Chen <peter.chen@freescale.com>
-Date: Fri, 8 Aug 2014 09:12:52 +0800
-Subject: [PATCH] MLK-11340-40 usb: whitelist: update otg & eh's TPL for fsl
- i.mx
-
-The default TPL is for USB OTG & EH compliance test, the supported
-class is: mass storage, hub, and hid.
-
-Besides, we add one match criterion that matching targeted device
-through class at interface descriptor.
-
-Tested-by: Li Jun <b47624@freescale.com>
-Signed-off-by: Peter Chen <peter.chen@freescale.com>
-(cherry picked from commit 483c071d989ceb36cacf76e1e3e779c67e5b8280)
-(cherry picked from commit defcf3883f60f8ea913481f16411752cb0132a74)
----
- drivers/usb/core/otg_whitelist.h | 73 ++++++++++++++++++++++++++++------------
- 1 file changed, 52 insertions(+), 21 deletions(-)
-
---- a/drivers/usb/core/otg_whitelist.h
-+++ b/drivers/usb/core/otg_whitelist.h
-@@ -13,35 +13,62 @@
-  */
- 
- static struct usb_device_id whitelist_table[] = {
--
--/* hubs are optional in OTG, but very handy ... */
--{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), },
--{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), },
--
--#ifdef	CONFIG_USB_PRINTER		/* ignoring nonstatic linkage! */
--/* FIXME actually, printers are NOT supposed to use device classes;
-- * they're supposed to use interface classes...
-- */
--{ USB_DEVICE_INFO(7, 1, 1) },
--{ USB_DEVICE_INFO(7, 1, 2) },
--{ USB_DEVICE_INFO(7, 1, 3) },
-+/* Add FSL i.mx whitelist, the default list is for USB Compliance Test */
-+#if defined(CONFIG_USB_EHSET_TEST_FIXTURE)	\
-+	|| defined(CONFIG_USB_EHSET_TEST_FIXTURE_MODULE)
-+#define TEST_SE0_NAK_PID			0x0101
-+#define TEST_J_PID				0x0102
-+#define TEST_K_PID				0x0103
-+#define TEST_PACKET_PID				0x0104
-+#define TEST_HS_HOST_PORT_SUSPEND_RESUME	0x0106
-+#define TEST_SINGLE_STEP_GET_DEV_DESC		0x0107
-+#define TEST_SINGLE_STEP_SET_FEATURE		0x0108
-+{ USB_DEVICE(0x1a0a, TEST_SE0_NAK_PID) },
-+{ USB_DEVICE(0x1a0a, TEST_J_PID) },
-+{ USB_DEVICE(0x1a0a, TEST_K_PID) },
-+{ USB_DEVICE(0x1a0a, TEST_PACKET_PID) },
-+{ USB_DEVICE(0x1a0a, TEST_HS_HOST_PORT_SUSPEND_RESUME) },
-+{ USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_GET_DEV_DESC) },
-+{ USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_SET_FEATURE) },
- #endif
- 
--#ifdef	CONFIG_USB_NET_CDCETHER
--/* Linux-USB CDC Ethernet gadget */
--{ USB_DEVICE(0x0525, 0xa4a1), },
--/* Linux-USB CDC Ethernet + RNDIS gadget */
--{ USB_DEVICE(0x0525, 0xa4a2), },
-+#define USB_INTERFACE_CLASS_INFO(cl) \
-+	.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS, \
-+	.bInterfaceClass = (cl)
-+
-+{USB_INTERFACE_CLASS_INFO(USB_CLASS_HUB) },
-+#if defined(CONFIG_USB_STORAGE) || defined(CONFIG_USB_STORAGE_MODULE)
-+{USB_INTERFACE_CLASS_INFO(USB_CLASS_MASS_STORAGE) },
- #endif
--
--#if	IS_ENABLED(CONFIG_USB_TEST)
--/* gadget zero, for testing */
--{ USB_DEVICE(0x0525, 0xa4a0), },
-+#if defined(CONFIG_USB_HID) || defined(CONFIG_USB_HID_MODULE)
-+{USB_INTERFACE_CLASS_INFO(USB_CLASS_HID) },
- #endif
- 
- { }	/* Terminating entry */
- };
- 
-+static bool match_int_class(struct usb_device_id *id, struct usb_device *udev)
-+{
-+	struct usb_host_config *c;
-+	int num_configs, i;
-+
-+	/* Copy the code from generic.c */
-+	c = udev->config;
-+	num_configs = udev->descriptor.bNumConfigurations;
-+	for (i = 0; i < num_configs; (i++, c++)) {
-+		struct usb_interface_descriptor	*desc = NULL;
-+
-+		/* It's possible that a config has no interfaces! */
-+		if (c->desc.bNumInterfaces > 0)
-+			desc = &c->intf_cache[0]->altsetting->desc;
-+
-+		if (desc && (desc->bInterfaceClass == id->bInterfaceClass))
-+			return true;
-+	}
-+
-+	return false;
-+}
-+
- static int is_targeted(struct usb_device *dev)
- {
- 	struct usb_device_id	*id = whitelist_table;
-@@ -90,6 +117,10 @@ static int is_targeted(struct usb_device
- 		    (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
- 			continue;
- 
-+		if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) &&
-+		    (!match_int_class(id, dev)))
-+			continue;
-+
- 		return 1;
- 	}
- 
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0013-MLK-9785-1-usb-host-ehci-hcd-enable-park-mode.patch b/target/linux/layerscape/patches-5.4/820-usb-0013-MLK-9785-1-usb-host-ehci-hcd-enable-park-mode.patch
deleted file mode 100644
index f7da7b23d5..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0013-MLK-9785-1-usb-host-ehci-hcd-enable-park-mode.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From df4f2de9834b02c58bc59cbd6c148db03fcbaba5 Mon Sep 17 00:00:00 2001
-From: Peter Chen <peter.chen@freescale.com>
-Date: Tue, 4 Nov 2014 20:46:15 +0800
-Subject: [PATCH] MLK-9785-1 usb: host: ehci-hcd: enable park mode
-
-Enable park mode will improve the performance a lot at USB ethernet use
-case, but a little at USB mass storage use case, and it is not harm from
-the tests. Below the performance comparison at imx6sl:
-
-USB Ethernet (Mbps)
-	Default			Enable Park
-TX	192			262
-RX	262			290
-
-USB Mass Storage (MB/s)
-Read	21.8			22.9
-Write	19.5			22.8
-
-This patch is used for freescale internal.
-
-Signed-off-by: Peter Chen <peter.chen@freescale.com>
-(cherry picked from commit b2289a78958859cff37508e4db0314463f33c2e0)
-(cherry picked from commit 233f37db41b01b0f827b91422711642228371615)
----
- drivers/usb/host/ehci-hcd.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -81,7 +81,7 @@ module_param (log2_irq_thresh, int, S_IR
- MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
- 
- /* initial park setting:  slower than hw default */
--static unsigned park = 0;
-+static unsigned park = 3;
- module_param (park, uint, S_IRUGO);
- MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
- 
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0014-MLK-17380-3-usb-move-EH-SINGLE_STEP_SET_FEATURE-impl.patch b/target/linux/layerscape/patches-5.4/820-usb-0014-MLK-17380-3-usb-move-EH-SINGLE_STEP_SET_FEATURE-impl.patch
deleted file mode 100644
index 8361a8771c..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0014-MLK-17380-3-usb-move-EH-SINGLE_STEP_SET_FEATURE-impl.patch
+++ /dev/null
@@ -1,364 +0,0 @@
-From d4806e4f103895387dc679fe53e1f4a5d41391bf Mon Sep 17 00:00:00 2001
-From: Peter Chen <peter.chen@nxp.com>
-Date: Thu, 18 Jan 2018 11:03:24 +0800
-Subject: [PATCH] MLK-17380-3 usb: move EH SINGLE_STEP_SET_FEATURE implement to
- core
-
-Since other USB 2.0 host may need it, like USB2 for XHCI. We move
-this design to HCD core.
-
-Acked-by: Jun Li <jun.li@nxp.com>
-Signed-off-by: Peter Chen <peter.chen@nxp.com>
-(cherry picked from commit 035a27e1a3088261f40f77534aaccfe5825c2f96)
----
- drivers/usb/core/hcd.c      | 134 ++++++++++++++++++++++++++++++++++++++++++
- drivers/usb/host/ehci-hcd.c |   4 ++
- drivers/usb/host/ehci-hub.c | 139 --------------------------------------------
- drivers/usb/host/ehci-q.c   |   2 +-
- include/linux/usb/hcd.h     |  13 ++++-
- 5 files changed, 151 insertions(+), 141 deletions(-)
-
---- a/drivers/usb/core/hcd.c
-+++ b/drivers/usb/core/hcd.c
-@@ -2111,6 +2111,140 @@ int usb_hcd_get_frame_number (struct usb
- }
- 
- /*-------------------------------------------------------------------------*/
-+#ifdef CONFIG_USB_HCD_TEST_MODE
-+
-+static void usb_ehset_completion(struct urb *urb)
-+{
-+	struct completion  *done = urb->context;
-+
-+	complete(done);
-+}
-+/*
-+ * Allocate and initialize a control URB. This request will be used by the
-+ * EHSET SINGLE_STEP_SET_FEATURE test in which the DATA and STATUS stages
-+ * of the GetDescriptor request are sent 15 seconds after the SETUP stage.
-+ * Return NULL if failed.
-+ */
-+static struct urb *request_single_step_set_feature_urb(
-+	struct usb_device	*udev,
-+	void			*dr,
-+	void			*buf,
-+	struct completion	*done
-+) {
-+	struct urb *urb;
-+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
-+	struct usb_host_endpoint *ep;
-+
-+	urb = usb_alloc_urb(0, GFP_KERNEL);
-+	if (!urb)
-+		return NULL;
-+
-+	urb->pipe = usb_rcvctrlpipe(udev, 0);
-+	ep = (usb_pipein(urb->pipe) ? udev->ep_in : udev->ep_out)
-+				[usb_pipeendpoint(urb->pipe)];
-+	if (!ep) {
-+		usb_free_urb(urb);
-+		return NULL;
-+	}
-+
-+	urb->ep = ep;
-+	urb->dev = udev;
-+	urb->setup_packet = (void *)dr;
-+	urb->transfer_buffer = buf;
-+	urb->transfer_buffer_length = USB_DT_DEVICE_SIZE;
-+	urb->complete = usb_ehset_completion;
-+	urb->status = -EINPROGRESS;
-+	urb->actual_length = 0;
-+	urb->transfer_flags = URB_DIR_IN;
-+	usb_get_urb(urb);
-+	atomic_inc(&urb->use_count);
-+	atomic_inc(&urb->dev->urbnum);
-+	urb->setup_dma = dma_map_single(
-+			hcd->self.sysdev,
-+			urb->setup_packet,
-+			sizeof(struct usb_ctrlrequest),
-+			DMA_TO_DEVICE);
-+	urb->transfer_dma = dma_map_single(
-+			hcd->self.sysdev,
-+			urb->transfer_buffer,
-+			urb->transfer_buffer_length,
-+			DMA_FROM_DEVICE);
-+	urb->context = done;
-+	return urb;
-+}
-+
-+int ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
-+{
-+	int retval = -ENOMEM;
-+	struct usb_ctrlrequest *dr;
-+	struct urb *urb;
-+	struct usb_device *udev;
-+	struct usb_device_descriptor *buf;
-+	DECLARE_COMPLETION_ONSTACK(done);
-+
-+	/* Obtain udev of the rhub's child port */
-+	udev = usb_hub_find_child(hcd->self.root_hub, port);
-+	if (!udev) {
-+		dev_err(hcd->self.controller, "No device attached to the RootHub\n");
-+		return -ENODEV;
-+	}
-+	buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
-+	if (!buf)
-+		return -ENOMEM;
-+
-+	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
-+	if (!dr) {
-+		kfree(buf);
-+		return -ENOMEM;
-+	}
-+
-+	/* Fill Setup packet for GetDescriptor */
-+	dr->bRequestType = USB_DIR_IN;
-+	dr->bRequest = USB_REQ_GET_DESCRIPTOR;
-+	dr->wValue = cpu_to_le16(USB_DT_DEVICE << 8);
-+	dr->wIndex = 0;
-+	dr->wLength = cpu_to_le16(USB_DT_DEVICE_SIZE);
-+	urb = request_single_step_set_feature_urb(udev, dr, buf, &done);
-+	if (!urb)
-+		goto cleanup;
-+
-+	/* Submit just the SETUP stage */
-+	retval = hcd->driver->submit_single_step_set_feature(hcd, urb, 1);
-+	if (retval)
-+		goto out1;
-+	if (!wait_for_completion_timeout(&done, msecs_to_jiffies(2000))) {
-+		usb_kill_urb(urb);
-+		retval = -ETIMEDOUT;
-+		dev_err(hcd->self.controller,
-+			"%s SETUP stage timed out on ep0\n", __func__);
-+		goto out1;
-+	}
-+	msleep(15 * 1000);
-+
-+	/* Complete remaining DATA and STATUS stages using the same URB */
-+	urb->status = -EINPROGRESS;
-+	usb_get_urb(urb);
-+	atomic_inc(&urb->use_count);
-+	atomic_inc(&urb->dev->urbnum);
-+	retval = hcd->driver->submit_single_step_set_feature(hcd, urb, 0);
-+	if (!retval && !wait_for_completion_timeout(&done,
-+						msecs_to_jiffies(2000))) {
-+		usb_kill_urb(urb);
-+		retval = -ETIMEDOUT;
-+		dev_err(hcd->self.controller,
-+			"%s IN stage timed out on ep0\n", __func__);
-+	}
-+out1:
-+	usb_free_urb(urb);
-+cleanup:
-+	kfree(dr);
-+	kfree(buf);
-+	return retval;
-+}
-+EXPORT_SYMBOL_GPL(ehset_single_step_set_feature);
-+#endif /* CONFIG_USB_HCD_TEST_MODE */
-+
-+/*-------------------------------------------------------------------------*/
- 
- #ifdef	CONFIG_PM
- 
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1254,6 +1254,10 @@ static const struct hc_driver ehci_hc_dr
- 	 * device support
- 	 */
- 	.free_dev =		ehci_remove_device,
-+#ifdef CONFIG_USB_HCD_TEST_MODE
-+	/* EH SINGLE_STEP_SET_FEATURE test support */
-+	.submit_single_step_set_feature	= ehci_submit_single_step_set_feature,
-+#endif
- };
- 
- void ehci_init_driver(struct hc_driver *drv,
---- a/drivers/usb/host/ehci-hub.c
-+++ b/drivers/usb/host/ehci-hub.c
-@@ -727,145 +727,6 @@ ehci_hub_descriptor (
- }
- 
- /*-------------------------------------------------------------------------*/
--#ifdef CONFIG_USB_HCD_TEST_MODE
--
--#define EHSET_TEST_SINGLE_STEP_SET_FEATURE 0x06
--
--static void usb_ehset_completion(struct urb *urb)
--{
--	struct completion  *done = urb->context;
--
--	complete(done);
--}
--static int submit_single_step_set_feature(
--	struct usb_hcd	*hcd,
--	struct urb	*urb,
--	int		is_setup
--);
--
--/*
-- * Allocate and initialize a control URB. This request will be used by the
-- * EHSET SINGLE_STEP_SET_FEATURE test in which the DATA and STATUS stages
-- * of the GetDescriptor request are sent 15 seconds after the SETUP stage.
-- * Return NULL if failed.
-- */
--static struct urb *request_single_step_set_feature_urb(
--	struct usb_device	*udev,
--	void			*dr,
--	void			*buf,
--	struct completion	*done
--) {
--	struct urb *urb;
--	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
--	struct usb_host_endpoint *ep;
--
--	urb = usb_alloc_urb(0, GFP_KERNEL);
--	if (!urb)
--		return NULL;
--
--	urb->pipe = usb_rcvctrlpipe(udev, 0);
--	ep = (usb_pipein(urb->pipe) ? udev->ep_in : udev->ep_out)
--				[usb_pipeendpoint(urb->pipe)];
--	if (!ep) {
--		usb_free_urb(urb);
--		return NULL;
--	}
--
--	urb->ep = ep;
--	urb->dev = udev;
--	urb->setup_packet = (void *)dr;
--	urb->transfer_buffer = buf;
--	urb->transfer_buffer_length = USB_DT_DEVICE_SIZE;
--	urb->complete = usb_ehset_completion;
--	urb->status = -EINPROGRESS;
--	urb->actual_length = 0;
--	urb->transfer_flags = URB_DIR_IN;
--	usb_get_urb(urb);
--	atomic_inc(&urb->use_count);
--	atomic_inc(&urb->dev->urbnum);
--	urb->setup_dma = dma_map_single(
--			hcd->self.sysdev,
--			urb->setup_packet,
--			sizeof(struct usb_ctrlrequest),
--			DMA_TO_DEVICE);
--	urb->transfer_dma = dma_map_single(
--			hcd->self.sysdev,
--			urb->transfer_buffer,
--			urb->transfer_buffer_length,
--			DMA_FROM_DEVICE);
--	urb->context = done;
--	return urb;
--}
--
--static int ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
--{
--	int retval = -ENOMEM;
--	struct usb_ctrlrequest *dr;
--	struct urb *urb;
--	struct usb_device *udev;
--	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
--	struct usb_device_descriptor *buf;
--	DECLARE_COMPLETION_ONSTACK(done);
--
--	/* Obtain udev of the rhub's child port */
--	udev = usb_hub_find_child(hcd->self.root_hub, port);
--	if (!udev) {
--		ehci_err(ehci, "No device attached to the RootHub\n");
--		return -ENODEV;
--	}
--	buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
--	if (!buf)
--		return -ENOMEM;
--
--	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
--	if (!dr) {
--		kfree(buf);
--		return -ENOMEM;
--	}
--
--	/* Fill Setup packet for GetDescriptor */
--	dr->bRequestType = USB_DIR_IN;
--	dr->bRequest = USB_REQ_GET_DESCRIPTOR;
--	dr->wValue = cpu_to_le16(USB_DT_DEVICE << 8);
--	dr->wIndex = 0;
--	dr->wLength = cpu_to_le16(USB_DT_DEVICE_SIZE);
--	urb = request_single_step_set_feature_urb(udev, dr, buf, &done);
--	if (!urb)
--		goto cleanup;
--
--	/* Submit just the SETUP stage */
--	retval = submit_single_step_set_feature(hcd, urb, 1);
--	if (retval)
--		goto out1;
--	if (!wait_for_completion_timeout(&done, msecs_to_jiffies(2000))) {
--		usb_kill_urb(urb);
--		retval = -ETIMEDOUT;
--		ehci_err(ehci, "%s SETUP stage timed out on ep0\n", __func__);
--		goto out1;
--	}
--	msleep(15 * 1000);
--
--	/* Complete remaining DATA and STATUS stages using the same URB */
--	urb->status = -EINPROGRESS;
--	usb_get_urb(urb);
--	atomic_inc(&urb->use_count);
--	atomic_inc(&urb->dev->urbnum);
--	retval = submit_single_step_set_feature(hcd, urb, 0);
--	if (!retval && !wait_for_completion_timeout(&done,
--						msecs_to_jiffies(2000))) {
--		usb_kill_urb(urb);
--		retval = -ETIMEDOUT;
--		ehci_err(ehci, "%s IN stage timed out on ep0\n", __func__);
--	}
--out1:
--	usb_free_urb(urb);
--cleanup:
--	kfree(dr);
--	kfree(buf);
--	return retval;
--}
--#endif /* CONFIG_USB_HCD_TEST_MODE */
--/*-------------------------------------------------------------------------*/
- 
- int ehci_hub_control(
- 	struct usb_hcd	*hcd,
---- a/drivers/usb/host/ehci-q.c
-+++ b/drivers/usb/host/ehci-q.c
-@@ -1165,7 +1165,7 @@ submit_async (
-  * performed; TRUE - SETUP and FALSE - IN+STATUS
-  * Returns 0 if success
-  */
--static int submit_single_step_set_feature(
-+static int ehci_submit_single_step_set_feature(
- 	struct usb_hcd  *hcd,
- 	struct urb      *urb,
- 	int             is_setup
---- a/include/linux/usb/hcd.h
-+++ b/include/linux/usb/hcd.h
-@@ -409,7 +409,10 @@ struct hc_driver {
- 	int	(*find_raw_port_number)(struct usb_hcd *, int);
- 	/* Call for power on/off the port if necessary */
- 	int	(*port_power)(struct usb_hcd *hcd, int portnum, bool enable);
--
-+	/* Call for SINGLE_STEP_SET_FEATURE Test for USB2 EH certification */
-+#define EHSET_TEST_SINGLE_STEP_SET_FEATURE 0x06
-+	int	(*submit_single_step_set_feature)(struct usb_hcd *,
-+			struct urb *, int);
- };
- 
- static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd)
-@@ -474,6 +477,14 @@ int usb_hcd_setup_local_mem(struct usb_h
- 
- struct platform_device;
- extern void usb_hcd_platform_shutdown(struct platform_device *dev);
-+#ifdef CONFIG_USB_HCD_TEST_MODE
-+extern int ehset_single_step_set_feature(struct usb_hcd *hcd, int port);
-+#else
-+static inline int ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
-+{
-+	return 0;
-+}
-+#endif /* CONFIG_USB_HCD_TEST_MODE */
- 
- #ifdef CONFIG_USB_PCI
- struct pci_dev;
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0015-MLK-17380-4-usb-host-xhci-add-EH-SINGLE_STEP_SET_FEA.patch b/target/linux/layerscape/patches-5.4/820-usb-0015-MLK-17380-4-usb-host-xhci-add-EH-SINGLE_STEP_SET_FEA.patch
deleted file mode 100644
index 4f4381c9a5..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0015-MLK-17380-4-usb-host-xhci-add-EH-SINGLE_STEP_SET_FEA.patch
+++ /dev/null
@@ -1,203 +0,0 @@
-From 6a313b6072925ab757688328b9f91b16d5a39bb3 Mon Sep 17 00:00:00 2001
-From: Peter Chen <peter.chen@nxp.com>
-Date: Fri, 9 Feb 2018 10:11:32 +0800
-Subject: [PATCH] MLK-17380-4 usb: host: xhci: add EH SINGLE_STEP_SET_FEATURE
- Test for USB2
-
-This function is similar with EHCI's, but implemented using XHCI.
-The USB2 host needs to send SETUP packet first, then wait 15
-seconds before DATA (IN) + STATUS stage.
-
-It is needed at USB Certification test for Embedded Host 2.0, and
-the detail is at CH6.4.1.1 of On-The-Go and Embedded Host Supplement
-to the USB Revision 2.0 Specification
-
-Acked-by: Jun Li <jun.li@nxp.com>
-Signed-off-by: Peter Chen <peter.chen@nxp.com>
-(cherry picked from commit 8d46e3bca527a5d899446d3858274fb5cbab1a1e)
----
- drivers/usb/host/xhci-hub.c  |   9 ++++
- drivers/usb/host/xhci-ring.c | 123 +++++++++++++++++++++++++++++++++++++++++++
- drivers/usb/host/xhci.c      |   1 +
- drivers/usb/host/xhci.h      |  10 ++++
- 4 files changed, 143 insertions(+)
-
---- a/drivers/usb/host/xhci-hub.c
-+++ b/drivers/usb/host/xhci-hub.c
-@@ -1422,6 +1422,15 @@ int xhci_hub_control(struct usb_hcd *hcd
- 			/* 4.19.6 Port Test Modes (USB2 Test Mode) */
- 			if (hcd->speed != HCD_USB2)
- 				goto error;
-+#ifdef CONFIG_USB_HCD_TEST_MODE
-+			if (test_mode == EHSET_TEST_SINGLE_STEP_SET_FEATURE) {
-+				spin_unlock_irqrestore(&xhci->lock, flags);
-+				retval = ehset_single_step_set_feature(hcd,
-+								wIndex + 1);
-+				spin_lock_irqsave(&xhci->lock, flags);
-+				break;
-+			}
-+#endif
- 			if (test_mode > TEST_FORCE_EN || test_mode < TEST_J)
- 				goto error;
- 			retval = xhci_enter_test_mode(xhci, test_mode, wIndex,
---- a/drivers/usb/host/xhci-ring.c
-+++ b/drivers/usb/host/xhci-ring.c
-@@ -3636,6 +3636,129 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
- 	return 0;
- }
- 
-+#ifdef CONFIG_USB_HCD_TEST_MODE
-+/*
-+ * This function prepare TRBs and submits them for the
-+ * SINGLE_STEP_SET_FEATURE Test.
-+ * This is done in two parts: first SETUP req for GetDesc is sent then
-+ * 15 seconds later, the IN stage for GetDesc starts to req data from dev
-+ *
-+ * is_setup : argument decides which of the two stage needs to be
-+ * performed; TRUE - SETUP and FALSE - IN+STATUS
-+ * Returns 0 if success
-+ */
-+int xhci_submit_single_step_set_feature(struct usb_hcd *hcd,
-+	struct urb *urb, int is_setup)
-+{
-+	int slot_id;
-+	unsigned int ep_index;
-+	struct xhci_ring *ep_ring;
-+	int ret;
-+	struct usb_ctrlrequest *setup;
-+	struct xhci_generic_trb *start_trb;
-+	int start_cycle;
-+	u32 field, length_field, remainder;
-+	struct urb_priv *urb_priv;
-+	struct xhci_td *td;
-+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-+
-+	/* urb_priv will be free after transcation has completed */
-+	urb_priv = kzalloc(sizeof(struct urb_priv) +
-+			sizeof(struct xhci_td), GFP_KERNEL);
-+	if (!urb_priv)
-+		return -ENOMEM;
-+
-+	td = &urb_priv->td[0];
-+	urb_priv->num_tds = 1;
-+	urb_priv->num_tds_done = 0;
-+	urb->hcpriv = urb_priv;
-+
-+	ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
-+	if (!ep_ring) {
-+		ret = -EINVAL;
-+		goto free_priv;
-+	}
-+
-+	slot_id = urb->dev->slot_id;
-+	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
-+
-+	setup = (struct usb_ctrlrequest *) urb->setup_packet;
-+	if (is_setup) {
-+		ret = prepare_transfer(xhci, xhci->devs[slot_id],
-+				ep_index, urb->stream_id,
-+				1, urb, 0, GFP_KERNEL);
-+		if (ret < 0)
-+			goto free_priv;
-+
-+		start_trb = &ep_ring->enqueue->generic;
-+		start_cycle = ep_ring->cycle_state;
-+		/* Save the DMA address of the last TRB in the TD */
-+		td->last_trb = ep_ring->enqueue;
-+		field = TRB_IOC | TRB_IDT | TRB_TYPE(TRB_SETUP) | start_cycle;
-+		/* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
-+		if ((xhci->hci_version >= 0x100) ||
-+				(xhci->quirks & XHCI_MTK_HOST))
-+			field |= TRB_TX_TYPE(TRB_DATA_IN);
-+
-+		queue_trb(xhci, ep_ring, false,
-+			  setup->bRequestType | setup->bRequest << 8 |
-+			  le16_to_cpu(setup->wValue) << 16,
-+			  le16_to_cpu(setup->wIndex) |
-+			  le16_to_cpu(setup->wLength) << 16,
-+			  TRB_LEN(8) | TRB_INTR_TARGET(0),
-+			  /* Immediate data in pointer */
-+			  field);
-+		giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
-+				start_cycle, start_trb);
-+		return 0;
-+	}
-+
-+	ret = prepare_transfer(xhci, xhci->devs[slot_id],
-+			ep_index, urb->stream_id,
-+			2, urb, 0, GFP_KERNEL);
-+	if (ret < 0)
-+		goto free_priv;
-+
-+	start_trb = &ep_ring->enqueue->generic;
-+	start_cycle = ep_ring->cycle_state;
-+	field = TRB_ISP | TRB_TYPE(TRB_DATA);
-+
-+	remainder = xhci_td_remainder(xhci, 0,
-+				   urb->transfer_buffer_length,
-+				   urb->transfer_buffer_length,
-+				   urb, 1);
-+
-+	length_field = TRB_LEN(urb->transfer_buffer_length) |
-+		TRB_TD_SIZE(remainder) |
-+		TRB_INTR_TARGET(0);
-+
-+	if (urb->transfer_buffer_length > 0) {
-+		field |= TRB_DIR_IN;
-+		queue_trb(xhci, ep_ring, true,
-+				lower_32_bits(urb->transfer_dma),
-+				upper_32_bits(urb->transfer_dma),
-+				length_field,
-+				field | ep_ring->cycle_state);
-+	}
-+
-+	td->last_trb = ep_ring->enqueue;
-+	field = TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state;
-+	queue_trb(xhci, ep_ring, false,
-+			0,
-+			0,
-+			TRB_INTR_TARGET(0),
-+			field);
-+
-+	giveback_first_trb(xhci, slot_id, ep_index, 0,
-+			start_cycle, start_trb);
-+
-+	return 0;
-+free_priv:
-+	xhci_urb_free_priv(urb_priv);
-+	return ret;
-+}
-+#endif /* CONFIG_USB_HCD_TEST_MODE */
-+
- /*
-  * The transfer burst count field of the isochronous TRB defines the number of
-  * bursts that are required to move all packets in this TD.  Only SuperSpeed
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -5393,6 +5393,7 @@ static const struct hc_driver xhci_hc_dr
- 	.disable_usb3_lpm_timeout =	xhci_disable_usb3_lpm_timeout,
- 	.find_raw_port_number =	xhci_find_raw_port_number,
- 	.clear_tt_buffer_complete = xhci_clear_tt_buffer_complete,
-+	.submit_single_step_set_feature	= xhci_submit_single_step_set_feature,
- };
- 
- void xhci_init_driver(struct hc_driver *drv,
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -2154,6 +2154,16 @@ int xhci_find_raw_port_number(struct usb
- struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd);
- 
- void xhci_hc_died(struct xhci_hcd *xhci);
-+#ifdef CONFIG_USB_HCD_TEST_MODE
-+int xhci_submit_single_step_set_feature(struct usb_hcd *hcd,
-+	struct urb *urb, int is_setup);
-+#else
-+static inline int xhci_submit_single_step_set_feature(struct usb_hcd *hcd,
-+	struct urb *urb, int is_setup)
-+{
-+	return 0;
-+}
-+#endif
- 
- #ifdef CONFIG_PM
- int xhci_bus_suspend(struct usb_hcd *hcd);
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0016-MLK-16735-usb-host-add-XHCI_CDNS_HOST-flag.patch b/target/linux/layerscape/patches-5.4/820-usb-0016-MLK-16735-usb-host-add-XHCI_CDNS_HOST-flag.patch
deleted file mode 100644
index 617374a26b..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0016-MLK-16735-usb-host-add-XHCI_CDNS_HOST-flag.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From a9f1d7994a9f8a38fdace19454ef031244e24e5e Mon Sep 17 00:00:00 2001
-From: Peter Chen <peter.chen@nxp.com>
-Date: Thu, 9 Nov 2017 16:58:40 +0800
-Subject: [PATCH] MLK-16735 usb: host: add XHCI_CDNS_HOST flag
-
-The NXP Cadence XHCI host has the same issue with Intel's,
-it is triggered by reboot test, the test case is described
-at this jira ticket.
-
-BuildInfo:
-- SCFW 8dcff26, IMX-MKIMAGE ea027c4b, ATF
-- U-Boot 2017.03-imx_v2017.03_4.9.51_imx8_beta1+g6dc7b0f
-
-Acked-by: Jun Li <jun.li@nxp.com>
-Signed-off-by: Peter Chen <peter.chen@nxp.com>
-(cherry picked from commit 5e353132931b9dc6e05f6bea1281ae35dd6a59d8)
----
- drivers/usb/host/xhci.c | 2 +-
- drivers/usb/host/xhci.h | 1 +
- 2 files changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -193,7 +193,7 @@ int xhci_reset(struct xhci_hcd *xhci)
- 	 * Without this delay, the subsequent HC register access,
- 	 * may result in a system hang very rarely.
- 	 */
--	if (xhci->quirks & XHCI_INTEL_HOST)
-+	if (xhci->quirks & (XHCI_INTEL_HOST | XHCI_CDNS_HOST))
- 		udelay(1000);
- 
- 	ret = xhci_handshake(&xhci->op_regs->command,
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1877,6 +1877,7 @@ struct xhci_hcd {
- #define XHCI_DEFAULT_PM_RUNTIME_ALLOW	BIT_ULL(33)
- #define XHCI_RESET_PLL_ON_DISCONNECT	BIT_ULL(34)
- #define XHCI_SNPS_BROKEN_SUSPEND    BIT_ULL(35)
-+#define XHCI_CDNS_HOST		BIT_ULL(36)
- #define XHCI_SKIP_PHY_INIT	BIT_ULL(37)
- #define XHCI_DISABLE_SPARSE	BIT_ULL(38)
- #define XHCI_NO_SOFT_RETRY	BIT_ULL(40)
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0017-MLK-19153-2-usb-host-xhci-do-not-return-error-status.patch b/target/linux/layerscape/patches-5.4/820-usb-0017-MLK-19153-2-usb-host-xhci-do-not-return-error-status.patch
deleted file mode 100644
index effe5997cd..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0017-MLK-19153-2-usb-host-xhci-do-not-return-error-status.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From c1f9fa8de2548172a69f35aeb6a43daedac7cb30 Mon Sep 17 00:00:00 2001
-From: Peter Chen <peter.chen@nxp.com>
-Date: Mon, 5 Mar 2018 09:13:26 +0800
-Subject: [PATCH] MLK-19153-2 usb: host: xhci: do not return error status for
- URB
-
-Current XHCI implementation does not consider completion interrupt
-for SETUP packet standalone, so it will show warning message
-and return error status for URB. In fact, it can support it. In
-this commit, we change warning message as debug message and set
-status as zero for URB.
-
-Support completion interrupt for SETUP packet is needed for USB EH2.0
-SINGLE_STEP_SET_FEATURE Test.
-
-Acked-by: Jun Li <jun.li@nxp.com>
-Signed-off-by: Peter Chen <peter.chen@nxp.com>
-(cherry picked from commit 78b212e8c2e083f513610efdff60b58c986381de)
----
- drivers/usb/host/xhci-ring.c | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/drivers/usb/host/xhci-ring.c
-+++ b/drivers/usb/host/xhci-ring.c
-@@ -2103,12 +2103,9 @@ static int process_ctrl_td(struct xhci_h
- 
- 	switch (trb_comp_code) {
- 	case COMP_SUCCESS:
--		if (trb_type != TRB_STATUS) {
--			xhci_warn(xhci, "WARN: Success on ctrl %s TRB without IOC set?\n",
-+		if (trb_type != TRB_STATUS)
-+			xhci_dbg(xhci, "Success on ctrl %s TRB without IOC set?\n",
- 				  (trb_type == TRB_DATA) ? "data" : "setup");
--			*status = -ESHUTDOWN;
--			break;
--		}
- 		*status = 0;
- 		break;
- 	case COMP_SHORT_PACKET:
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0018-MLK-18794-1-usb-host-xhci-add-.bus_suspend-override.patch b/target/linux/layerscape/patches-5.4/820-usb-0018-MLK-18794-1-usb-host-xhci-add-.bus_suspend-override.patch
deleted file mode 100644
index 5947563516..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0018-MLK-18794-1-usb-host-xhci-add-.bus_suspend-override.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From b5c498026a95f9d80be23711dd6c178cc78d6c33 Mon Sep 17 00:00:00 2001
-From: Peter Chen <peter.chen@nxp.com>
-Date: Wed, 15 Aug 2018 14:59:55 +0800
-Subject: [PATCH] MLK-18794-1 usb: host: xhci: add .bus_suspend override
-
-Some platforms (eg: Cadence USB3) have special requirements to add
-platform USB register setting between xhci_bus_suspend and
-platform USB controller suspend routine. Eg, The Cadence USB3 needs
-RX detect clock switch from 24Mhz to 32Khz within 100ms after set
-port to U3, but sometimes, for USB3 HUB connection, the USB2
-bus suspend will cost more than 100ms, and introduce the disconnection
-before the PHY enters low power mode, then the state is in mess from
-controller side.
-
-So in this commit, we introduce .bus_suspend for xhci_driver_overrides
-for above use cases.
-
-Signed-off-by: Peter Chen <peter.chen@nxp.com>
-(cherry picked from commit f6baa57913ceb40da14a945820cb87e8d6ceb7c7)
----
- drivers/usb/host/xhci.c | 2 ++
- drivers/usb/host/xhci.h | 1 +
- 2 files changed, 3 insertions(+)
-
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -5414,6 +5414,8 @@ void xhci_init_driver(struct hc_driver *
- 			drv->check_bandwidth = over->check_bandwidth;
- 		if (over->reset_bandwidth)
- 			drv->reset_bandwidth = over->reset_bandwidth;
-+		if (over->bus_suspend)
-+			drv->bus_suspend = over->bus_suspend;
- 	}
- }
- EXPORT_SYMBOL_GPL(xhci_init_driver);
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1920,6 +1920,7 @@ struct xhci_driver_overrides {
- 	int (*start)(struct usb_hcd *hcd);
- 	int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
- 	void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
-+	int (*bus_suspend)(struct usb_hcd *hcd);
- };
- 
- #define	XHCI_CFC_DELAY		10
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0019-MLK-9829-usb-core-print-suggested-message-if-failed-.patch b/target/linux/layerscape/patches-5.4/820-usb-0019-MLK-9829-usb-core-print-suggested-message-if-failed-.patch
deleted file mode 100644
index 16e4e7e68c..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0019-MLK-9829-usb-core-print-suggested-message-if-failed-.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 9b297faabe3fc35741746aca39128fbb12e28113 Mon Sep 17 00:00:00 2001
-From: Li Jun <b47624@freescale.com>
-Date: Wed, 12 Nov 2014 15:16:33 +0800
-Subject: [PATCH] MLK-9829 usb: core: print suggested message if failed to get
- device descriptor
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is required for USB OTG and EH compliance test 6.7.22(A-UUT “Device No
-Response� for connection timeout). When the connected usb device(PET) does
-not response to transactions, host will fail to get device descriptor.
-
-Signed-off-by: Li Jun <jun.li@freescale.com>
-(cherry picked from commit 86d0bd661ecbbdf97dd9a8ddbaf0d3811de7f39e)
-(cherry picked from commit 858af83637291d2ececfc7b2b4b17e3a371b53f3)
----
- drivers/usb/core/hub.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/core/hub.c
-+++ b/drivers/usb/core/hub.c
-@@ -4780,7 +4780,8 @@ hub_port_init(struct usb_hub *hub, struc
- 			}
- 			if (r) {
- 				if (r != -ENODEV)
--					dev_err(&udev->dev, "device descriptor read/64, error %d\n",
-+					dev_err(&udev->dev,
-+						"device no response, device descriptor read/64, error %d\n",
- 							r);
- 				retval = -EMSGSIZE;
- 				continue;
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0020-MLK-16604-1-usb-host-xhci-plat-add-XHCI_MISSING_CAS-.patch b/target/linux/layerscape/patches-5.4/820-usb-0020-MLK-16604-1-usb-host-xhci-plat-add-XHCI_MISSING_CAS-.patch
deleted file mode 100644
index 9fae877942..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0020-MLK-16604-1-usb-host-xhci-plat-add-XHCI_MISSING_CAS-.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 0767542941c535ebb156087593426bb1fb25e967 Mon Sep 17 00:00:00 2001
-From: Li Jun <jun.li@nxp.com>
-Date: Tue, 28 Nov 2017 21:43:18 +0800
-Subject: [PATCH] MLK-16604-1 usb: host: xhci-plat: add XHCI_MISSING_CAS quirk
-
-i.MX8MQ USB3 host needs XHCI_MISSING_CAS quirk to warm reset the port to
-enum the USB3 device plugged in while system sleep, as the port state is
-stuck in polling mode after resume.
-
-Signed-off-by: Li Jun <jun.li@nxp.com>
-Acked-by: Peter Chen <peter.chen@nxp.com>
-(cherry picked from commit 9f1f4316775a061d3ad46c63f84a377e2ffd015d)
----
- drivers/usb/host/xhci-plat.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -303,6 +303,10 @@ static int xhci_plat_probe(struct platfo
- 
- 		device_property_read_u32(tmpdev, "imod-interval-ns",
- 					 &xhci->imod_interval);
-+
-+		if (device_property_read_bool(tmpdev,
-+					      "usb3-resume-missing-cas"))
-+			xhci->quirks |= XHCI_MISSING_CAS;
- 	}
- 
- 	hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0021-MLK-22099-usb-host-xhci-do-warm-reset-for-link-state.patch b/target/linux/layerscape/patches-5.4/820-usb-0021-MLK-22099-usb-host-xhci-do-warm-reset-for-link-state.patch
deleted file mode 100644
index eb5dcb5595..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0021-MLK-22099-usb-host-xhci-do-warm-reset-for-link-state.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 6921c206918a2bd9882bbf77211d37a063233d95 Mon Sep 17 00:00:00 2001
-From: Li Jun <jun.li@nxp.com>
-Date: Thu, 8 Aug 2019 16:13:40 +0800
-Subject: [PATCH] MLK-22099 usb: host: xhci: do warm reset for link state
- rxdect
-
-As some USB3 port will lose link state while system sleep, then
-the link state will be at rxdect after resume, we need a warm
-reset to bring it back, so add the rxdect condition for CAS
-missing.
-
-Signed-off-by: Li Jun <jun.li@nxp.com>
----
- drivers/usb/host/xhci-hub.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/host/xhci-hub.c
-+++ b/drivers/usb/host/xhci-hub.c
-@@ -1740,7 +1740,8 @@ static bool xhci_port_missing_cas_quirk(
- 		return false;
- 
- 	if (((portsc & PORT_PLS_MASK) != XDEV_POLLING) &&
--	    ((portsc & PORT_PLS_MASK) != XDEV_COMP_MODE))
-+	    ((portsc & PORT_PLS_MASK) != XDEV_COMP_MODE) &&
-+	    ((portsc & PORT_PLS_MASK) != XDEV_RXDETECT))
- 		return false;
- 
- 	/* clear wakeup/change bits, and do a warm port reset */
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0022-usb-fsl-Remove-unused-variable.patch b/target/linux/layerscape/patches-5.4/820-usb-0022-usb-fsl-Remove-unused-variable.patch
deleted file mode 100644
index 9d8c8ba9a5..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0022-usb-fsl-Remove-unused-variable.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 7dc31f24c77d41660047ea0dcddbe33ae1d819ee Mon Sep 17 00:00:00 2001
-From: Nikhil Badola <nikhil.badola@freescale.com>
-Date: Mon, 11 May 2015 13:19:09 +0530
-Subject: [PATCH] usb: fsl: Remove unused variable
-
-Remove unused variable td_complete
-
-Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
-Reviewed-by: Ran Wang <ran.wang_1@nxp.com>
-Reviewed-by: Peter Chen <peter.chen@nxp.com>
----
- drivers/usb/gadget/udc/fsl_udc_core.c | 5 +----
- 1 file changed, 1 insertion(+), 4 deletions(-)
-
---- a/drivers/usb/gadget/udc/fsl_udc_core.c
-+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
-@@ -1595,14 +1595,13 @@ static int process_ep_req(struct fsl_udc
- 		struct fsl_req *curr_req)
- {
- 	struct ep_td_struct *curr_td;
--	int	td_complete, actual, remaining_length, j, tmp;
-+	int	actual, remaining_length, j, tmp;
- 	int	status = 0;
- 	int	errors = 0;
- 	struct  ep_queue_head *curr_qh = &udc->ep_qh[pipe];
- 	int direction = pipe % 2;
- 
- 	curr_td = curr_req->head;
--	td_complete = 0;
- 	actual = curr_req->req.length;
- 
- 	for (j = 0; j < curr_req->dtd_count; j++) {
-@@ -1647,11 +1646,9 @@ static int process_ep_req(struct fsl_udc
- 				status = -EPROTO;
- 				break;
- 			} else {
--				td_complete++;
- 				break;
- 			}
- 		} else {
--			td_complete++;
- 			VDBG("dTD transmitted successful");
- 		}
- 
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0023-usb-gadget-Correct-NULL-pointer-checking-in-fsl-gadg.patch b/target/linux/layerscape/patches-5.4/820-usb-0023-usb-gadget-Correct-NULL-pointer-checking-in-fsl-gadg.patch
deleted file mode 100644
index 1195dc5dfd..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0023-usb-gadget-Correct-NULL-pointer-checking-in-fsl-gadg.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 56c801e09a2b8fdc8f4ec889d7a9cec57d55f545 Mon Sep 17 00:00:00 2001
-From: Nikhil Badola <nikhil.badola@freescale.com>
-Date: Tue, 9 Jun 2015 16:47:17 +0530
-Subject: [PATCH] usb: gadget: Correct NULL pointer checking in fsl gadget
-
-Correct NULL pointer checking for endpoint descriptor
-before it gets dereferenced
-
-Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-Reviewed-by: Peter Chen <peter.chen@nxp.com>
----
- drivers/usb/gadget/udc/fsl_udc_core.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/usb/gadget/udc/fsl_udc_core.c
-+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
-@@ -1052,10 +1052,11 @@ static int fsl_ep_fifo_status(struct usb
- 	u32 bitmask;
- 	struct ep_queue_head *qh;
- 
--	ep = container_of(_ep, struct fsl_ep, ep);
--	if (!_ep || (!ep->ep.desc && ep_index(ep) != 0))
-+	if (!_ep || _ep->desc || !(_ep->desc->bEndpointAddress&0xF))
- 		return -ENODEV;
- 
-+	ep = container_of(_ep, struct fsl_ep, ep);
-+
- 	udc = (struct fsl_udc *)ep->udc;
- 
- 	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0024-LF-387-1-Revert-usb-dwc3-Add-cache-type-configuratio.patch b/target/linux/layerscape/patches-5.4/820-usb-0024-LF-387-1-Revert-usb-dwc3-Add-cache-type-configuratio.patch
deleted file mode 100644
index 9a3d3f4a17..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0024-LF-387-1-Revert-usb-dwc3-Add-cache-type-configuratio.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From d408e9c29dd580cb94e39da2b0eef81061d22061 Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Thu, 19 Dec 2019 17:02:36 +0800
-Subject: [PATCH] LF-387-1 Revert "usb: dwc3: Add cache type configuration
- support"
-
-This reverts commit ebceaf435cc96892d22b334b2a6517374c0d6a6e.
-Will use next version patch to replace this.
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
----
- drivers/usb/dwc3/core.c | 61 +++++--------------------------------------------
- drivers/usb/dwc3/core.h | 15 ------------
- 2 files changed, 6 insertions(+), 70 deletions(-)
-
---- a/drivers/usb/dwc3/core.c
-+++ b/drivers/usb/dwc3/core.c
-@@ -919,54 +919,6 @@ static void dwc3_set_power_down_clk_scal
- 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
- }
- 
--#ifdef CONFIG_OF
--struct dwc3_cache_type {
--	u8 transfer_type_datard;
--	u8 transfer_type_descrd;
--	u8 transfer_type_datawr;
--	u8 transfer_type_descwr;
--};
--
--static const struct dwc3_cache_type layerscape_dwc3_cache_type = {
--	.transfer_type_datard = 2,
--	.transfer_type_descrd = 2,
--	.transfer_type_datawr = 2,
--	.transfer_type_descwr = 2,
--};
--
--/**
-- * dwc3_set_cache_type - Configure cache type registers
-- * @dwc: Pointer to our controller context structure
-- */
--static void dwc3_set_cache_type(struct dwc3 *dwc)
--{
--	u32 tmp, reg;
--	const struct dwc3_cache_type *cache_type =
--		device_get_match_data(dwc->dev);
--
--	if (cache_type) {
--		reg = dwc3_readl(dwc->regs,  DWC3_GSBUSCFG0);
--		tmp = reg;
--
--		reg &= ~DWC3_GSBUSCFG0_DATARD(~0);
--		reg |= DWC3_GSBUSCFG0_DATARD(cache_type->transfer_type_datard);
--
--		reg &= ~DWC3_GSBUSCFG0_DESCRD(~0);
--		reg |= DWC3_GSBUSCFG0_DESCRD(cache_type->transfer_type_descrd);
--
--		reg &= ~DWC3_GSBUSCFG0_DATAWR(~0);
--		reg |= DWC3_GSBUSCFG0_DATAWR(cache_type->transfer_type_datawr);
--
--		reg &= ~DWC3_GSBUSCFG0_DESCWR(~0);
--		reg |= DWC3_GSBUSCFG0_DESCWR(cache_type->transfer_type_descwr);
--
--		if (tmp != reg)
--			dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg);
--	}
--}
--#endif
--
--
- /**
-  * dwc3_core_init - Low-level initialization of DWC3 Core
-  * @dwc: Pointer to our controller context structure
-@@ -1027,10 +979,6 @@ static int dwc3_core_init(struct dwc3 *d
- 
- 	dwc3_set_incr_burst_type(dwc);
- 
--#ifdef CONFIG_OF
--	dwc3_set_cache_type(dwc);
--#endif
--
- 	usb_phy_set_suspend(dwc->usb2_phy, 0);
- 	usb_phy_set_suspend(dwc->usb3_phy, 0);
- 	ret = phy_power_on(dwc->usb2_generic_phy);
-@@ -1984,9 +1932,12 @@ static const struct dev_pm_ops dwc3_dev_
- 
- #ifdef CONFIG_OF
- static const struct of_device_id of_dwc3_match[] = {
--	{ .compatible = "fsl,layerscape-dwc3", .data = &layerscape_dwc3_cache_type, },
--	{ .compatible = "snps,dwc3" },
--	{ .compatible = "synopsys,dwc3"	},
-+	{
-+		.compatible = "snps,dwc3"
-+	},
-+	{
-+		.compatible = "synopsys,dwc3"
-+	},
- 	{ },
- };
- MODULE_DEVICE_TABLE(of, of_dwc3_match);
---- a/drivers/usb/dwc3/core.h
-+++ b/drivers/usb/dwc3/core.h
-@@ -167,21 +167,6 @@
- /* Bit fields */
- 
- /* Global SoC Bus Configuration INCRx Register 0 */
--#ifdef CONFIG_OF
--#define DWC3_GSBUSCFG0_DATARD_SHIFT	28
--#define DWC3_GSBUSCFG0_DATARD(n)	(((n) & 0xf)		\
--			<< DWC3_GSBUSCFG0_DATARD_SHIFT)
--#define DWC3_GSBUSCFG0_DESCRD_SHIFT	24
--#define DWC3_GSBUSCFG0_DESCRD(n)	(((n) & 0xf)		\
--			<< DWC3_GSBUSCFG0_DESCRD_SHIFT)
--#define DWC3_GSBUSCFG0_DATAWR_SHIFT	20
--#define DWC3_GSBUSCFG0_DATAWR(n)	(((n) & 0xf)		\
--			<< DWC3_GSBUSCFG0_DATAWR_SHIFT)
--#define DWC3_GSBUSCFG0_DESCWR_SHIFT	16
--#define DWC3_GSBUSCFG0_DESCWR(n)	(((n) & 0xf)		\
--			<< DWC3_GSBUSCFG0_DESCWR_SHIFT)
--#endif
--
- #define DWC3_GSBUSCFG0_INCR256BRSTENA	(1 << 7) /* INCR256 burst */
- #define DWC3_GSBUSCFG0_INCR128BRSTENA	(1 << 6) /* INCR128 burst */
- #define DWC3_GSBUSCFG0_INCR64BRSTENA	(1 << 5) /* INCR64 burst */
diff --git a/target/linux/layerscape/patches-5.4/820-usb-0025-LF-387-4-usb-dwc3-Add-cache-type-configuration-suppo.patch b/target/linux/layerscape/patches-5.4/820-usb-0025-LF-387-4-usb-dwc3-Add-cache-type-configuration-suppo.patch
deleted file mode 100644
index f9de7035aa..0000000000
--- a/target/linux/layerscape/patches-5.4/820-usb-0025-LF-387-4-usb-dwc3-Add-cache-type-configuration-suppo.patch
+++ /dev/null
@@ -1,157 +0,0 @@
-From cda32ee78d8b448bcbfc8e3d55dc04d809657ce2 Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Wed, 20 Nov 2019 14:09:23 +0800
-Subject: [PATCH] LF-387-4 usb: dwc3: Add cache type configuration support
-
-This feature is telling how to configure cache type on 4 different
-transfer types: Data Read, Desc Read, Data Write and Desc write. For each
-treasfer type, controller has a 4-bit register field to enable different
-cache type. Quoted from DWC3 data book Table 6-5 Cache Type Bit Assignments:
-----------------------------------------------------------------
-MBUS_TYPE| bit[3]       |bit[2]       |bit[1]     |bit[0]
-----------------------------------------------------------------
-AHB      |Cacheable     |Bufferable   |Privilegge |Data
-AXI3     |Write Allocate|Read Allocate|Cacheable  |Bufferable
-AXI4     |Allocate Other|Allocate     |Modifiable |Bufferable
-AXI4     |Other Allocate|Allocate     |Modifiable |Bufferable
-Native   |Same as AXI   |Same as AXI  |Same as AXI|Same as AXI
-----------------------------------------------------------------
-Note: The AHB, AXI3, AXI4, and PCIe busses use different names for certain
-signals, which have the same meaning:
-  Bufferable = Posted
-  Cacheable = Modifiable = Snoop (negation of No Snoop)
-
-In most cases, driver support is not required unless the default values of
-registers are not correct *and* DWC3 node has enabled dma-coherent. So far we
-have observed USB device detect failure on some Layerscape platforms if this
-programming was not applied.
-
-Related struct:
-struct dwc3_cache_type {
-	u8 transfer_type_datard;
-	u8 transfer_type_descrd;
-	u8 transfer_type_datawr;
-	u8 transfer_type_descwr;
-};
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-Reviewed-by: Jun Li <jun.li@nxp.com>
----
- drivers/usb/dwc3/core.c | 67 ++++++++++++++++++++++++++++++++++++++++++++-----
- drivers/usb/dwc3/core.h | 15 +++++++++++
- 2 files changed, 76 insertions(+), 6 deletions(-)
-
---- a/drivers/usb/dwc3/core.c
-+++ b/drivers/usb/dwc3/core.c
-@@ -919,6 +919,53 @@ static void dwc3_set_power_down_clk_scal
- 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
- }
- 
-+#ifdef CONFIG_OF
-+struct dwc3_cache_type {
-+	u8 transfer_type_datard;
-+	u8 transfer_type_descrd;
-+	u8 transfer_type_datawr;
-+	u8 transfer_type_descwr;
-+};
-+
-+static const struct dwc3_cache_type ls1088a_dwc3_cache_type = {
-+	.transfer_type_datard = 2,
-+	.transfer_type_descrd = 2,
-+	.transfer_type_datawr = 2,
-+	.transfer_type_descwr = 2,
-+};
-+
-+/**
-+ * dwc3_set_cache_type - Configure cache type registers
-+ * @dwc: Pointer to our controller context structure
-+ */
-+static void dwc3_set_cache_type(struct dwc3 *dwc)
-+{
-+	u32 tmp, reg;
-+	const struct dwc3_cache_type *cache_type =
-+		device_get_match_data(dwc->dev);
-+
-+	if (cache_type) {
-+		reg = dwc3_readl(dwc->regs,  DWC3_GSBUSCFG0);
-+		tmp = reg;
-+
-+		reg &= ~DWC3_GSBUSCFG0_DATARD(~0);
-+		reg |= DWC3_GSBUSCFG0_DATARD(cache_type->transfer_type_datard);
-+
-+		reg &= ~DWC3_GSBUSCFG0_DESCRD(~0);
-+		reg |= DWC3_GSBUSCFG0_DESCRD(cache_type->transfer_type_descrd);
-+
-+		reg &= ~DWC3_GSBUSCFG0_DATAWR(~0);
-+		reg |= DWC3_GSBUSCFG0_DATAWR(cache_type->transfer_type_datawr);
-+
-+		reg &= ~DWC3_GSBUSCFG0_DESCWR(~0);
-+		reg |= DWC3_GSBUSCFG0_DESCWR(cache_type->transfer_type_descwr);
-+
-+		if (tmp != reg)
-+			dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg);
-+	}
-+}
-+#endif
-+
- /**
-  * dwc3_core_init - Low-level initialization of DWC3 Core
-  * @dwc: Pointer to our controller context structure
-@@ -979,6 +1026,10 @@ static int dwc3_core_init(struct dwc3 *d
- 
- 	dwc3_set_incr_burst_type(dwc);
- 
-+#ifdef CONFIG_OF
-+	dwc3_set_cache_type(dwc);
-+#endif
-+
- 	usb_phy_set_suspend(dwc->usb2_phy, 0);
- 	usb_phy_set_suspend(dwc->usb3_phy, 0);
- 	ret = phy_power_on(dwc->usb2_generic_phy);
-@@ -1932,12 +1983,16 @@ static const struct dev_pm_ops dwc3_dev_
- 
- #ifdef CONFIG_OF
- static const struct of_device_id of_dwc3_match[] = {
--	{
--		.compatible = "snps,dwc3"
--	},
--	{
--		.compatible = "synopsys,dwc3"
--	},
-+	{ .compatible = "fsl,ls1012a-dwc3", .data = &ls1088a_dwc3_cache_type, },
-+	{ .compatible = "fsl,ls1021a-dwc3", .data = &ls1088a_dwc3_cache_type, },
-+	{ .compatible = "fsl,ls1028a-dwc3", .data = &ls1088a_dwc3_cache_type, },
-+	{ .compatible = "fsl,ls1043a-dwc3", .data = &ls1088a_dwc3_cache_type, },
-+	{ .compatible = "fsl,ls1046a-dwc3", .data = &ls1088a_dwc3_cache_type, },
-+	{ .compatible = "fsl,ls1088a-dwc3", .data = &ls1088a_dwc3_cache_type, },
-+	{ .compatible = "fsl,ls2088a-dwc3", .data = &ls1088a_dwc3_cache_type, },
-+	{ .compatible = "fsl,lx2160a-dwc3", .data = &ls1088a_dwc3_cache_type, },
-+	{ .compatible = "snps,dwc3" },
-+	{ .compatible = "synopsys,dwc3"	},
- 	{ },
- };
- MODULE_DEVICE_TABLE(of, of_dwc3_match);
---- a/drivers/usb/dwc3/core.h
-+++ b/drivers/usb/dwc3/core.h
-@@ -167,6 +167,21 @@
- /* Bit fields */
- 
- /* Global SoC Bus Configuration INCRx Register 0 */
-+#ifdef CONFIG_OF
-+#define DWC3_GSBUSCFG0_DATARD_SHIFT	28
-+#define DWC3_GSBUSCFG0_DATARD(n)	(((n) & 0xf)		\
-+			<< DWC3_GSBUSCFG0_DATARD_SHIFT)
-+#define DWC3_GSBUSCFG0_DESCRD_SHIFT	24
-+#define DWC3_GSBUSCFG0_DESCRD(n)	(((n) & 0xf)		\
-+			<< DWC3_GSBUSCFG0_DESCRD_SHIFT)
-+#define DWC3_GSBUSCFG0_DATAWR_SHIFT	20
-+#define DWC3_GSBUSCFG0_DATAWR(n)	(((n) & 0xf)		\
-+			<< DWC3_GSBUSCFG0_DATAWR_SHIFT)
-+#define DWC3_GSBUSCFG0_DESCWR_SHIFT	16
-+#define DWC3_GSBUSCFG0_DESCWR(n)	(((n) & 0xf)		\
-+			<< DWC3_GSBUSCFG0_DESCWR_SHIFT)
-+#endif
-+
- #define DWC3_GSBUSCFG0_INCR256BRSTENA	(1 << 7) /* INCR256 burst */
- #define DWC3_GSBUSCFG0_INCR128BRSTENA	(1 << 6) /* INCR128 burst */
- #define DWC3_GSBUSCFG0_INCR64BRSTENA	(1 << 5) /* INCR64 burst */
diff --git a/target/linux/layerscape/patches-5.4/821-vfio-0001-vfio-fsl-mc-Add-VFIO-framework-skeleton-for-fsl-mc-d.patch b/target/linux/layerscape/patches-5.4/821-vfio-0001-vfio-fsl-mc-Add-VFIO-framework-skeleton-for-fsl-mc-d.patch
deleted file mode 100644
index c752b963a8..0000000000
--- a/target/linux/layerscape/patches-5.4/821-vfio-0001-vfio-fsl-mc-Add-VFIO-framework-skeleton-for-fsl-mc-d.patch
+++ /dev/null
@@ -1,252 +0,0 @@
-From 8b9efd00727523c56eb9d17ad42338b6090b4b8e Mon Sep 17 00:00:00 2001
-From: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Date: Fri, 12 May 2017 10:27:07 +0530
-Subject: [PATCH] vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices
-
-This patch adds the infrastructure for VFIO support for fsl-mc
-devices. Subsequent patches will add support for binding and secure
-assigning these devices using VFIO.
-
-FSL-MC is a new bus (driver/bus/fsl-mc/) which is different
-from PCI and Platform bus.
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
----
- drivers/vfio/Kconfig                      |   1 +
- drivers/vfio/Makefile                     |   1 +
- drivers/vfio/fsl-mc/Kconfig               |   9 ++
- drivers/vfio/fsl-mc/Makefile              |   2 +
- drivers/vfio/fsl-mc/vfio_fsl_mc.c         | 162 ++++++++++++++++++++++++++++++
- drivers/vfio/fsl-mc/vfio_fsl_mc_private.h |  14 +++
- include/uapi/linux/vfio.h                 |   1 +
- 7 files changed, 190 insertions(+)
- create mode 100644 drivers/vfio/fsl-mc/Kconfig
- create mode 100644 drivers/vfio/fsl-mc/Makefile
- create mode 100644 drivers/vfio/fsl-mc/vfio_fsl_mc.c
- create mode 100644 drivers/vfio/fsl-mc/vfio_fsl_mc_private.h
-
---- a/drivers/vfio/Kconfig
-+++ b/drivers/vfio/Kconfig
-@@ -47,4 +47,5 @@ config VFIO_NOIOMMU
- source "drivers/vfio/pci/Kconfig"
- source "drivers/vfio/platform/Kconfig"
- source "drivers/vfio/mdev/Kconfig"
-+source "drivers/vfio/fsl-mc/Kconfig"
- source "virt/lib/Kconfig"
---- a/drivers/vfio/Makefile
-+++ b/drivers/vfio/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_VFIO_SPAPR_EEH) += vfio_spa
- obj-$(CONFIG_VFIO_PCI) += pci/
- obj-$(CONFIG_VFIO_PLATFORM) += platform/
- obj-$(CONFIG_VFIO_MDEV) += mdev/
-+obj-$(CONFIG_VFIO_FSL_MC) += fsl-mc/
---- /dev/null
-+++ b/drivers/vfio/fsl-mc/Kconfig
-@@ -0,0 +1,9 @@
-+config VFIO_FSL_MC
-+	tristate "VFIO support for QorIQ DPAA2 fsl-mc bus devices"
-+	depends on VFIO && FSL_MC_BUS && EVENTFD
-+	help
-+	  Driver to enable support for the VFIO QorIQ DPAA2 fsl-mc
-+	  (Management Complex) devices. This is required to passthrough
-+	  fsl-mc bus devices using the VFIO framework.
-+
-+	  If you don't know what to do here, say N.
---- /dev/null
-+++ b/drivers/vfio/fsl-mc/Makefile
-@@ -0,0 +1,2 @@
-+vfio-fsl_mc-y := vfio_fsl_mc.o
-+obj-$(CONFIG_VFIO_FSL_MC) += vfio_fsl_mc.o
---- /dev/null
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-@@ -0,0 +1,162 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-+/*
-+ * Copyright 2013-2016 Freescale Semiconductor Inc.
-+ * Copyright 2016-2017,2019 NXP
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/iommu.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/vfio.h>
-+#include <linux/fsl/mc.h>
-+
-+#include "vfio_fsl_mc_private.h"
-+
-+
-+static int vfio_fsl_mc_open(void *device_data)
-+{
-+	if (!try_module_get(THIS_MODULE))
-+		return -ENODEV;
-+
-+	return 0;
-+}
-+
-+static void vfio_fsl_mc_release(void *device_data)
-+{
-+	module_put(THIS_MODULE);
-+}
-+
-+static long vfio_fsl_mc_ioctl(void *device_data, unsigned int cmd,
-+			      unsigned long arg)
-+{
-+	switch (cmd) {
-+	case VFIO_DEVICE_GET_INFO:
-+	{
-+		return -EINVAL;
-+	}
-+	case VFIO_DEVICE_GET_REGION_INFO:
-+	{
-+		return -EINVAL;
-+	}
-+	case VFIO_DEVICE_GET_IRQ_INFO:
-+	{
-+		return -EINVAL;
-+	}
-+	case VFIO_DEVICE_SET_IRQS:
-+	{
-+		return -EINVAL;
-+	}
-+	case VFIO_DEVICE_RESET:
-+	{
-+		return -EINVAL;
-+	}
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
-+static ssize_t vfio_fsl_mc_read(void *device_data, char __user *buf,
-+				size_t count, loff_t *ppos)
-+{
-+	return -EINVAL;
-+}
-+
-+static ssize_t vfio_fsl_mc_write(void *device_data, const char __user *buf,
-+				 size_t count, loff_t *ppos)
-+{
-+	return -EINVAL;
-+}
-+
-+static int vfio_fsl_mc_mmap(void *device_data, struct vm_area_struct *vma)
-+{
-+	return -EINVAL;
-+}
-+
-+static const struct vfio_device_ops vfio_fsl_mc_ops = {
-+	.name		= "vfio-fsl-mc",
-+	.open		= vfio_fsl_mc_open,
-+	.release	= vfio_fsl_mc_release,
-+	.ioctl		= vfio_fsl_mc_ioctl,
-+	.read		= vfio_fsl_mc_read,
-+	.write		= vfio_fsl_mc_write,
-+	.mmap		= vfio_fsl_mc_mmap,
-+};
-+
-+static int vfio_fsl_mc_probe(struct fsl_mc_device *mc_dev)
-+{
-+	struct iommu_group *group;
-+	struct vfio_fsl_mc_device *vdev;
-+	struct device *dev = &mc_dev->dev;
-+	int ret;
-+
-+	group = vfio_iommu_group_get(dev);
-+	if (!group) {
-+		dev_err(dev, "%s: VFIO: No IOMMU group\n", __func__);
-+		return -EINVAL;
-+	}
-+
-+	vdev = devm_kzalloc(dev, sizeof(*vdev), GFP_KERNEL);
-+	if (!vdev) {
-+		vfio_iommu_group_put(group, dev);
-+		return -ENOMEM;
-+	}
-+
-+	vdev->mc_dev = mc_dev;
-+
-+	ret = vfio_add_group_dev(dev, &vfio_fsl_mc_ops, vdev);
-+	if (ret) {
-+		dev_err(dev, "%s: Failed to add to vfio group\n", __func__);
-+		vfio_iommu_group_put(group, dev);
-+		return ret;
-+	}
-+
-+	return ret;
-+}
-+
-+static int vfio_fsl_mc_remove(struct fsl_mc_device *mc_dev)
-+{
-+	struct vfio_fsl_mc_device *vdev;
-+	struct device *dev = &mc_dev->dev;
-+
-+	vdev = vfio_del_group_dev(dev);
-+	if (!vdev)
-+		return -EINVAL;
-+
-+	vfio_iommu_group_put(mc_dev->dev.iommu_group, dev);
-+	devm_kfree(dev, vdev);
-+
-+	return 0;
-+}
-+
-+/*
-+ * vfio-fsl_mc is a meta-driver, so use driver_override interface to
-+ * bind a fsl_mc container with this driver and match_id_table is NULL.
-+ */
-+static struct fsl_mc_driver vfio_fsl_mc_driver = {
-+	.probe		= vfio_fsl_mc_probe,
-+	.remove		= vfio_fsl_mc_remove,
-+	.match_id_table = NULL,
-+	.driver	= {
-+		.name	= "vfio-fsl-mc",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init vfio_fsl_mc_driver_init(void)
-+{
-+	return fsl_mc_driver_register(&vfio_fsl_mc_driver);
-+}
-+
-+static void __exit vfio_fsl_mc_driver_exit(void)
-+{
-+	fsl_mc_driver_unregister(&vfio_fsl_mc_driver);
-+}
-+
-+module_init(vfio_fsl_mc_driver_init);
-+module_exit(vfio_fsl_mc_driver_exit);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("VFIO for FSL-MC devices - User Level meta-driver");
---- /dev/null
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc_private.h
-@@ -0,0 +1,14 @@
-+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-+/*
-+ * Copyright 2013-2016 Freescale Semiconductor Inc.
-+ * Copyright 2016,2019 NXP
-+ */
-+
-+#ifndef VFIO_FSL_MC_PRIVATE_H
-+#define VFIO_FSL_MC_PRIVATE_H
-+
-+struct vfio_fsl_mc_device {
-+	struct fsl_mc_device		*mc_dev;
-+};
-+
-+#endif /* VFIO_PCI_PRIVATE_H */
---- a/include/uapi/linux/vfio.h
-+++ b/include/uapi/linux/vfio.h
-@@ -201,6 +201,7 @@ struct vfio_device_info {
- #define VFIO_DEVICE_FLAGS_AMBA  (1 << 3)	/* vfio-amba device */
- #define VFIO_DEVICE_FLAGS_CCW	(1 << 4)	/* vfio-ccw device */
- #define VFIO_DEVICE_FLAGS_AP	(1 << 5)	/* vfio-ap device */
-+#define VFIO_DEVICE_FLAGS_FSL_MC (1 << 6)	/* vfio-fsl-mc device */
- 	__u32	num_regions;	/* Max region index + 1 */
- 	__u32	num_irqs;	/* Max IRQ index + 1 */
- };
diff --git a/target/linux/layerscape/patches-5.4/821-vfio-0002-vfio-fsl-mc-Scan-DPRC-objects-on-vfio-fsl-mc-driver-.patch b/target/linux/layerscape/patches-5.4/821-vfio-0002-vfio-fsl-mc-Scan-DPRC-objects-on-vfio-fsl-mc-driver-.patch
deleted file mode 100644
index 688747796f..0000000000
--- a/target/linux/layerscape/patches-5.4/821-vfio-0002-vfio-fsl-mc-Scan-DPRC-objects-on-vfio-fsl-mc-driver-.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From a309870f6fa4a9f69ca7490b355d147b0caeffd0 Mon Sep 17 00:00:00 2001
-From: Diana Craciun <diana.craciun@nxp.com>
-Date: Fri, 13 Sep 2019 17:20:35 +0300
-Subject: [PATCH] vfio/fsl-mc: Scan DPRC objects on vfio-fsl-mc driver bind
-
-The DPRC(Data Path Resource Container) device is a bus device and has
-child devices attached to it. When the vfio-fsl-mc driver is probed
-the DPRC is scanned and the child devices discovered and initialized.
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
----
- drivers/vfio/fsl-mc/vfio_fsl_mc.c | 99 +++++++++++++++++++++++++++++++++++++++
- 1 file changed, 99 insertions(+)
-
---- a/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-@@ -74,7 +74,75 @@ static int vfio_fsl_mc_mmap(void *device
- {
- 	return -EINVAL;
- }
-+static int vfio_fsl_mc_init_device(struct vfio_fsl_mc_device *vdev)
-+{
-+	struct fsl_mc_device *mc_dev = vdev->mc_dev;
-+	struct fsl_mc_bus *mc_bus;
-+	size_t region_size;
-+	int ret = 0;
-+	unsigned int irq_count;
-+
-+	/* Non-dprc devices share mc_io from parent */
-+	if (!is_fsl_mc_bus_dprc(mc_dev)) {
-+		struct fsl_mc_device *mc_cont = to_fsl_mc_device(mc_dev->dev.parent);
-+
-+		mc_dev->mc_io = mc_cont->mc_io;
-+		return 0;
-+	}
-+
-+	/* Use dprc mc-portal for interaction with MC f/w. */
-+	region_size = resource_size(mc_dev->regions);
-+	ret = fsl_create_mc_io(&mc_dev->dev,
-+			 mc_dev->regions[0].start,
-+			 region_size,
-+			 NULL,
-+			 FSL_MC_IO_ATOMIC_CONTEXT_PORTAL,
-+			 &mc_dev->mc_io);
-+	if (ret < 0) {
-+		dev_err(&mc_dev->dev, "failed to create mc-io (error = %d)\n", ret);
-+		return ret;
-+	}
-+	ret = dprc_open(mc_dev->mc_io, 0, mc_dev->obj_desc.id,
-+			  &mc_dev->mc_handle);
-+	if (ret < 0) {
-+		dev_err(&mc_dev->dev, "dprc_open() failed: %d\n", ret);
-+		goto clean_mc_io;
-+	}
- 
-+	mc_bus = to_fsl_mc_bus(mc_dev);
-+	/* initialize resource pools */
-+	fsl_mc_init_all_resource_pools(mc_dev);
-+
-+	mutex_init(&mc_bus->scan_mutex);
-+
-+	mutex_lock(&mc_bus->scan_mutex);
-+	ret = dprc_scan_objects(mc_dev, mc_dev->driver_override, false,
-+		&irq_count);
-+	mutex_unlock(&mc_bus->scan_mutex);
-+
-+	if (ret < 0) {
-+		dev_err(&mc_dev->dev, "dprc_scan_objects() failed: %d\n", ret);
-+		goto clean_resource_pool;
-+	}
-+
-+	if (irq_count > FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS) {
-+		dev_warn(&mc_dev->dev,
-+			 "IRQs needed (%u) exceed IRQs preallocated (%u)\n",
-+			 irq_count, FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS);
-+	}
-+
-+return 0;
-+
-+clean_resource_pool:
-+	fsl_mc_cleanup_all_resource_pools(mc_dev);
-+	dprc_close(mc_dev->mc_io, 0, mc_dev->mc_handle);
-+
-+clean_mc_io:
-+	fsl_destroy_mc_io(mc_dev->mc_io);
-+	mc_dev->mc_io = NULL;
-+
-+	return ret;
-+}
- static const struct vfio_device_ops vfio_fsl_mc_ops = {
- 	.name		= "vfio-fsl-mc",
- 	.open		= vfio_fsl_mc_open,
-@@ -113,8 +181,34 @@ static int vfio_fsl_mc_probe(struct fsl_
- 		return ret;
- 	}
- 
-+	ret = vfio_fsl_mc_init_device(vdev);
-+	if (ret) {
-+		vfio_iommu_group_put(group, dev);
-+		return ret;
-+	}
-+
- 	return ret;
- }
-+static int vfio_fsl_mc_device_remove(struct device *dev, void *data)
-+{
-+	struct fsl_mc_device *mc_dev;
-+
-+	WARN_ON(dev == NULL);
-+	mc_dev = to_fsl_mc_device(dev);
-+	if (WARN_ON(mc_dev == NULL))
-+		return -ENODEV;
-+	fsl_mc_device_remove(mc_dev);
-+
-+	return 0;
-+}
-+
-+static void vfio_fsl_mc_cleanup_dprc(struct fsl_mc_device *mc_dev)
-+{
-+	device_for_each_child(&mc_dev->dev, NULL, vfio_fsl_mc_device_remove);
-+	fsl_mc_cleanup_all_resource_pools(mc_dev);
-+	dprc_close(mc_dev->mc_io, 0, mc_dev->mc_handle);
-+	fsl_destroy_mc_io(mc_dev->mc_io);
-+}
- 
- static int vfio_fsl_mc_remove(struct fsl_mc_device *mc_dev)
- {
-@@ -125,6 +219,11 @@ static int vfio_fsl_mc_remove(struct fsl
- 	if (!vdev)
- 		return -EINVAL;
- 
-+	if (is_fsl_mc_bus_dprc(mc_dev))
-+		vfio_fsl_mc_cleanup_dprc(vdev->mc_dev);
-+
-+	mc_dev->mc_io = NULL;
-+
- 	vfio_iommu_group_put(mc_dev->dev.iommu_group, dev);
- 	devm_kfree(dev, vdev);
- 
diff --git a/target/linux/layerscape/patches-5.4/821-vfio-0003-vfio-fsl-mc-Implement-VFIO_DEVICE_GET_INFO-ioctl.patch b/target/linux/layerscape/patches-5.4/821-vfio-0003-vfio-fsl-mc-Implement-VFIO_DEVICE_GET_INFO-ioctl.patch
deleted file mode 100644
index 7ec0305050..0000000000
--- a/target/linux/layerscape/patches-5.4/821-vfio-0003-vfio-fsl-mc-Implement-VFIO_DEVICE_GET_INFO-ioctl.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From a548dc00536e2cc6e7e7f95487f5261b3133a0d7 Mon Sep 17 00:00:00 2001
-From: Diana Craciun <diana.craciun@nxp.com>
-Date: Wed, 18 Sep 2019 18:26:14 +0300
-Subject: [PATCH] vfio/fsl-mc: Implement VFIO_DEVICE_GET_INFO ioctl
-
-Allow userspace to get fsl-mc device info (number of regions
-and irqs).
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
----
- drivers/vfio/fsl-mc/vfio_fsl_mc.c | 22 +++++++++++++++++++++-
- 1 file changed, 21 insertions(+), 1 deletion(-)
-
---- a/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-@@ -32,10 +32,30 @@ static void vfio_fsl_mc_release(void *de
- static long vfio_fsl_mc_ioctl(void *device_data, unsigned int cmd,
- 			      unsigned long arg)
- {
-+	unsigned long minsz;
-+	struct vfio_fsl_mc_device *vdev = device_data;
-+	struct fsl_mc_device *mc_dev = vdev->mc_dev;
-+
- 	switch (cmd) {
- 	case VFIO_DEVICE_GET_INFO:
- 	{
--		return -EINVAL;
-+		struct vfio_device_info info;
-+
-+		minsz = offsetofend(struct vfio_device_info, num_irqs);
-+
-+		if (copy_from_user(&info, (void __user *)arg, minsz))
-+			return -EFAULT;
-+
-+		if (info.argsz < minsz)
-+			return -EINVAL;
-+
-+		info.flags = VFIO_DEVICE_FLAGS_FSL_MC;
-+		info.num_regions = mc_dev->obj_desc.region_count;
-+		info.num_irqs = mc_dev->obj_desc.irq_count;
-+
-+		return copy_to_user((void __user *)arg, &info, minsz) ?
-+			-EFAULT : 0;
-+
- 	}
- 	case VFIO_DEVICE_GET_REGION_INFO:
- 	{
diff --git a/target/linux/layerscape/patches-5.4/821-vfio-0004-vfio-fsl-mc-Implement-VFIO_DEVICE_GET_REGION_INFO-io.patch b/target/linux/layerscape/patches-5.4/821-vfio-0004-vfio-fsl-mc-Implement-VFIO_DEVICE_GET_REGION_INFO-io.patch
deleted file mode 100644
index c538ed0d5c..0000000000
--- a/target/linux/layerscape/patches-5.4/821-vfio-0004-vfio-fsl-mc-Implement-VFIO_DEVICE_GET_REGION_INFO-io.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-From 10abb46294d1569826854f77bcdb5d38d8db8e79 Mon Sep 17 00:00:00 2001
-From: Diana Craciun <diana.craciun@nxp.com>
-Date: Thu, 26 Sep 2019 15:13:24 +0300
-Subject: [PATCH] vfio/fsl-mc: Implement VFIO_DEVICE_GET_REGION_INFO ioctl call
-
-Expose to userspace information about the memory regions.
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
----
- drivers/vfio/fsl-mc/vfio_fsl_mc.c         | 76 ++++++++++++++++++++++++++++++-
- drivers/vfio/fsl-mc/vfio_fsl_mc_private.h | 19 ++++++++
- 2 files changed, 94 insertions(+), 1 deletion(-)
-
---- a/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-@@ -16,16 +16,70 @@
- #include "vfio_fsl_mc_private.h"
- 
- 
-+static int vfio_fsl_mc_regions_init(struct vfio_fsl_mc_device *vdev)
-+{
-+	struct fsl_mc_device *mc_dev = vdev->mc_dev;
-+	int count = mc_dev->obj_desc.region_count;
-+	int i;
-+
-+	vdev->regions = kcalloc(count, sizeof(struct vfio_fsl_mc_region),
-+				GFP_KERNEL);
-+	if (!vdev->regions)
-+		return -ENOMEM;
-+
-+	for (i = 0; i < count; i++) {
-+		struct resource *res = &mc_dev->regions[i];
-+
-+		vdev->regions[i].addr = res->start;
-+		vdev->regions[i].size = PAGE_ALIGN((resource_size(res)));
-+		vdev->regions[i].flags = 0;
-+	}
-+
-+	vdev->num_regions = mc_dev->obj_desc.region_count;
-+	return 0;
-+}
-+static void vfio_fsl_mc_regions_cleanup(struct vfio_fsl_mc_device *vdev)
-+{
-+	vdev->num_regions = 0;
-+	kfree(vdev->regions);
-+}
-+
- static int vfio_fsl_mc_open(void *device_data)
- {
-+	struct vfio_fsl_mc_device *vdev = device_data;
-+	int ret;
-+
- 	if (!try_module_get(THIS_MODULE))
- 		return -ENODEV;
- 
-+	mutex_lock(&vdev->driver_lock);
-+	if (!vdev->refcnt) {
-+		ret = vfio_fsl_mc_regions_init(vdev);
-+		if (ret)
-+			goto err_reg_init;
-+	}
-+	vdev->refcnt++;
-+
-+	mutex_unlock(&vdev->driver_lock);
- 	return 0;
-+
-+err_reg_init:
-+	mutex_unlock(&vdev->driver_lock);
-+	module_put(THIS_MODULE);
-+	return ret;
- }
- 
- static void vfio_fsl_mc_release(void *device_data)
- {
-+	struct vfio_fsl_mc_device *vdev = device_data;
-+
-+	mutex_lock(&vdev->driver_lock);
-+
-+	if (!(--vdev->refcnt))
-+		vfio_fsl_mc_regions_cleanup(vdev);
-+
-+	mutex_unlock(&vdev->driver_lock);
-+
- 	module_put(THIS_MODULE);
- }
- 
-@@ -59,7 +113,26 @@ static long vfio_fsl_mc_ioctl(void *devi
- 	}
- 	case VFIO_DEVICE_GET_REGION_INFO:
- 	{
--		return -EINVAL;
-+		struct vfio_region_info info;
-+
-+		minsz = offsetofend(struct vfio_region_info, offset);
-+
-+		if (copy_from_user(&info, (void __user *)arg, minsz))
-+			return -EFAULT;
-+
-+		if (info.argsz < minsz)
-+			return -EINVAL;
-+
-+		if (info.index >= vdev->num_regions)
-+			return -EINVAL;
-+
-+		/* map offset to the physical address  */
-+		info.offset = VFIO_FSL_MC_INDEX_TO_OFFSET(info.index);
-+		info.size = vdev->regions[info.index].size;
-+		info.flags = vdev->regions[info.index].flags;
-+
-+		return copy_to_user((void __user *)arg, &info, minsz);
-+
- 	}
- 	case VFIO_DEVICE_GET_IRQ_INFO:
- 	{
-@@ -206,6 +279,7 @@ static int vfio_fsl_mc_probe(struct fsl_
- 		vfio_iommu_group_put(group, dev);
- 		return ret;
- 	}
-+	mutex_init(&vdev->driver_lock);
- 
- 	return ret;
- }
---- a/drivers/vfio/fsl-mc/vfio_fsl_mc_private.h
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc_private.h
-@@ -7,8 +7,27 @@
- #ifndef VFIO_FSL_MC_PRIVATE_H
- #define VFIO_FSL_MC_PRIVATE_H
- 
-+#define VFIO_FSL_MC_OFFSET_SHIFT    40
-+#define VFIO_FSL_MC_OFFSET_MASK (((u64)(1) << VFIO_FSL_MC_OFFSET_SHIFT) - 1)
-+
-+#define VFIO_FSL_MC_OFFSET_TO_INDEX(off) (off >> VFIO_FSL_MC_OFFSET_SHIFT)
-+
-+#define VFIO_FSL_MC_INDEX_TO_OFFSET(index)	\
-+	((u64)(index) << VFIO_FSL_MC_OFFSET_SHIFT)
-+
-+struct vfio_fsl_mc_region {
-+	u32			flags;
-+	u32			type;
-+	u64			addr;
-+	resource_size_t		size;
-+};
-+
- struct vfio_fsl_mc_device {
- 	struct fsl_mc_device		*mc_dev;
-+	int				refcnt;
-+	u32				num_regions;
-+	struct vfio_fsl_mc_region	*regions;
-+	struct mutex driver_lock;
- };
- 
- #endif /* VFIO_PCI_PRIVATE_H */
diff --git a/target/linux/layerscape/patches-5.4/821-vfio-0005-vfio-fsl-mc-Allow-userspace-to-MMAP-fsl-mc-device-MM.patch b/target/linux/layerscape/patches-5.4/821-vfio-0005-vfio-fsl-mc-Allow-userspace-to-MMAP-fsl-mc-device-MM.patch
deleted file mode 100644
index 67bdd20800..0000000000
--- a/target/linux/layerscape/patches-5.4/821-vfio-0005-vfio-fsl-mc-Allow-userspace-to-MMAP-fsl-mc-device-MM.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From 3b81ac2bdcff0f611cad468329cc726600bb23ba Mon Sep 17 00:00:00 2001
-From: Diana Craciun <diana.craciun@nxp.com>
-Date: Fri, 27 Sep 2019 16:40:34 +0300
-Subject: [PATCH] vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO
- regions
-
-Allow userspace to mmap device regions for direct access of
-fsl-mc devices.
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
----
- drivers/vfio/fsl-mc/vfio_fsl_mc.c | 65 +++++++++++++++++++++++++++++++++++++--
- 1 file changed, 63 insertions(+), 2 deletions(-)
-
---- a/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-@@ -32,7 +32,10 @@ static int vfio_fsl_mc_regions_init(stru
- 
- 		vdev->regions[i].addr = res->start;
- 		vdev->regions[i].size = PAGE_ALIGN((resource_size(res)));
--		vdev->regions[i].flags = 0;
-+		vdev->regions[i].flags = VFIO_REGION_INFO_FLAG_MMAP;
-+		vdev->regions[i].flags |= VFIO_REGION_INFO_FLAG_READ;
-+		if (!(mc_dev->regions[i].flags & IORESOURCE_READONLY))
-+			vdev->regions[i].flags |= VFIO_REGION_INFO_FLAG_WRITE;
- 	}
- 
- 	vdev->num_regions = mc_dev->obj_desc.region_count;
-@@ -163,10 +166,68 @@ static ssize_t vfio_fsl_mc_write(void *d
- 	return -EINVAL;
- }
- 
-+static int vfio_fsl_mc_mmap_mmio(struct vfio_fsl_mc_region region,
-+				 struct vm_area_struct *vma)
-+{
-+	u64 size = vma->vm_end - vma->vm_start;
-+	u64 pgoff, base;
-+
-+	pgoff = vma->vm_pgoff &
-+		((1U << (VFIO_FSL_MC_OFFSET_SHIFT - PAGE_SHIFT)) - 1);
-+	base = pgoff << PAGE_SHIFT;
-+
-+	if (region.size < PAGE_SIZE || base + size > region.size)
-+		return -EINVAL;
-+
-+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-+
-+	vma->vm_pgoff = (region.addr >> PAGE_SHIFT) + pgoff;
-+
-+	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-+			       size, vma->vm_page_prot);
-+}
-+
- static int vfio_fsl_mc_mmap(void *device_data, struct vm_area_struct *vma)
- {
--	return -EINVAL;
-+	struct vfio_fsl_mc_device *vdev = device_data;
-+	struct fsl_mc_device *mc_dev = vdev->mc_dev;
-+	unsigned long size, addr;
-+	int index;
-+
-+	index = vma->vm_pgoff >> (VFIO_FSL_MC_OFFSET_SHIFT - PAGE_SHIFT);
-+
-+	if (vma->vm_end < vma->vm_start)
-+		return -EINVAL;
-+	if (vma->vm_start & ~PAGE_MASK)
-+		return -EINVAL;
-+	if (vma->vm_end & ~PAGE_MASK)
-+		return -EINVAL;
-+	if (!(vma->vm_flags & VM_SHARED))
-+		return -EINVAL;
-+	if (index >= vdev->num_regions)
-+		return -EINVAL;
-+
-+	if (!(vdev->regions[index].flags & VFIO_REGION_INFO_FLAG_MMAP))
-+		return -EINVAL;
-+
-+	if (!(vdev->regions[index].flags & VFIO_REGION_INFO_FLAG_READ)
-+			&& (vma->vm_flags & VM_READ))
-+		return -EINVAL;
-+
-+	if (!(vdev->regions[index].flags & VFIO_REGION_INFO_FLAG_WRITE)
-+			&& (vma->vm_flags & VM_WRITE))
-+		return -EINVAL;
-+
-+	addr = vdev->regions[index].addr;
-+	size = vdev->regions[index].size;
-+
-+	vma->vm_private_data = mc_dev;
-+
-+	return vfio_fsl_mc_mmap_mmio(vdev->regions[index], vma);
-+
-+	return -EFAULT;
- }
-+
- static int vfio_fsl_mc_init_device(struct vfio_fsl_mc_device *vdev)
- {
- 	struct fsl_mc_device *mc_dev = vdev->mc_dev;
diff --git a/target/linux/layerscape/patches-5.4/821-vfio-0006-vfio-fsl-mc-Added-lock-support-in-preparation-for-in.patch b/target/linux/layerscape/patches-5.4/821-vfio-0006-vfio-fsl-mc-Added-lock-support-in-preparation-for-in.patch
deleted file mode 100644
index 490f4e35f8..0000000000
--- a/target/linux/layerscape/patches-5.4/821-vfio-0006-vfio-fsl-mc-Added-lock-support-in-preparation-for-in.patch
+++ /dev/null
@@ -1,193 +0,0 @@
-From 9ea8e954812efc4fc9b27e553019295d4dcd0407 Mon Sep 17 00:00:00 2001
-From: Diana Craciun <diana.craciun@nxp.com>
-Date: Tue, 15 Oct 2019 11:22:26 +0300
-Subject: [PATCH] vfio/fsl-mc: Added lock support in preparation for interrupt
- handling
-
-All the devices in a DPRC share the same pool of interrupts.
-Because of this the access to the pool of interrupts must be
-protected with a lock. Extend the current lock implementation
-to have a lock per DPRC.
-
-Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
----
- drivers/vfio/fsl-mc/vfio_fsl_mc.c         | 90 ++++++++++++++++++++++++++++---
- drivers/vfio/fsl-mc/vfio_fsl_mc_private.h |  7 ++-
- 2 files changed, 89 insertions(+), 8 deletions(-)
-
---- a/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-@@ -15,6 +15,75 @@
- 
- #include "vfio_fsl_mc_private.h"
- 
-+static DEFINE_MUTEX(reflck_lock);
-+
-+static void vfio_fsl_mc_reflck_get(struct vfio_fsl_mc_reflck *reflck)
-+{
-+	kref_get(&reflck->kref);
-+}
-+
-+static void vfio_fsl_mc_reflck_release(struct kref *kref)
-+{
-+	struct vfio_fsl_mc_reflck *reflck = container_of(kref,
-+						      struct vfio_fsl_mc_reflck,
-+						      kref);
-+
-+	kfree(reflck);
-+	mutex_unlock(&reflck_lock);
-+}
-+
-+static void vfio_fsl_mc_reflck_put(struct vfio_fsl_mc_reflck *reflck)
-+{
-+	kref_put_mutex(&reflck->kref, vfio_fsl_mc_reflck_release, &reflck_lock);
-+}
-+
-+static struct vfio_fsl_mc_reflck *vfio_fsl_mc_reflck_alloc(void)
-+{
-+	struct vfio_fsl_mc_reflck *reflck;
-+
-+	reflck = kzalloc(sizeof(*reflck), GFP_KERNEL);
-+	if (!reflck)
-+		return ERR_PTR(-ENOMEM);
-+
-+	kref_init(&reflck->kref);
-+	mutex_init(&reflck->lock);
-+
-+	return reflck;
-+}
-+
-+static int vfio_fsl_mc_reflck_attach(struct vfio_fsl_mc_device *vdev)
-+{
-+	int ret = 0;
-+
-+	mutex_lock(&reflck_lock);
-+	if (is_fsl_mc_bus_dprc(vdev->mc_dev)) {
-+		vdev->reflck = vfio_fsl_mc_reflck_alloc();
-+	} else {
-+		struct device *mc_cont_dev = vdev->mc_dev->dev.parent;
-+		struct vfio_device *device;
-+		struct vfio_fsl_mc_device *cont_vdev;
-+
-+		device = vfio_device_get_from_dev(mc_cont_dev);
-+		if (!device) {
-+			ret = -ENODEV;
-+			goto unlock;
-+		}
-+
-+		cont_vdev = vfio_device_data(device);
-+		if (!cont_vdev->reflck) {
-+			vfio_device_put(device);
-+			ret = -ENODEV;
-+			goto unlock;
-+		}
-+		vfio_fsl_mc_reflck_get(cont_vdev->reflck);
-+		vdev->reflck = cont_vdev->reflck;
-+		vfio_device_put(device);
-+	}
-+
-+unlock:
-+	mutex_unlock(&reflck_lock);
-+	return ret;
-+}
- 
- static int vfio_fsl_mc_regions_init(struct vfio_fsl_mc_device *vdev)
- {
-@@ -55,7 +124,7 @@ static int vfio_fsl_mc_open(void *device
- 	if (!try_module_get(THIS_MODULE))
- 		return -ENODEV;
- 
--	mutex_lock(&vdev->driver_lock);
-+	mutex_lock(&vdev->reflck->lock);
- 	if (!vdev->refcnt) {
- 		ret = vfio_fsl_mc_regions_init(vdev);
- 		if (ret)
-@@ -63,11 +132,11 @@ static int vfio_fsl_mc_open(void *device
- 	}
- 	vdev->refcnt++;
- 
--	mutex_unlock(&vdev->driver_lock);
-+	mutex_unlock(&vdev->reflck->lock);
- 	return 0;
- 
- err_reg_init:
--	mutex_unlock(&vdev->driver_lock);
-+	mutex_unlock(&vdev->reflck->lock);
- 	module_put(THIS_MODULE);
- 	return ret;
- }
-@@ -76,12 +145,12 @@ static void vfio_fsl_mc_release(void *de
- {
- 	struct vfio_fsl_mc_device *vdev = device_data;
- 
--	mutex_lock(&vdev->driver_lock);
-+	mutex_lock(&vdev->reflck->lock);
- 
- 	if (!(--vdev->refcnt))
- 		vfio_fsl_mc_regions_cleanup(vdev);
- 
--	mutex_unlock(&vdev->driver_lock);
-+	mutex_unlock(&vdev->reflck->lock);
- 
- 	module_put(THIS_MODULE);
- }
-@@ -180,7 +249,6 @@ static int vfio_fsl_mc_mmap_mmio(struct
- 		return -EINVAL;
- 
- 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
--
- 	vma->vm_pgoff = (region.addr >> PAGE_SHIFT) + pgoff;
- 
- 	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-@@ -335,12 +403,18 @@ static int vfio_fsl_mc_probe(struct fsl_
- 		return ret;
- 	}
- 
-+	ret = vfio_fsl_mc_reflck_attach(vdev);
-+	if (ret) {
-+		vfio_iommu_group_put(group, dev);
-+		return ret;
-+	}
-+
- 	ret = vfio_fsl_mc_init_device(vdev);
- 	if (ret) {
-+		vfio_fsl_mc_reflck_put(vdev->reflck);
- 		vfio_iommu_group_put(group, dev);
- 		return ret;
- 	}
--	mutex_init(&vdev->driver_lock);
- 
- 	return ret;
- }
-@@ -374,6 +448,8 @@ static int vfio_fsl_mc_remove(struct fsl
- 	if (!vdev)
- 		return -EINVAL;
- 
-+	vfio_fsl_mc_reflck_put(vdev->reflck);
-+
- 	if (is_fsl_mc_bus_dprc(mc_dev))
- 		vfio_fsl_mc_cleanup_dprc(vdev->mc_dev);
- 
---- a/drivers/vfio/fsl-mc/vfio_fsl_mc_private.h
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc_private.h
-@@ -15,6 +15,11 @@
- #define VFIO_FSL_MC_INDEX_TO_OFFSET(index)	\
- 	((u64)(index) << VFIO_FSL_MC_OFFSET_SHIFT)
- 
-+struct vfio_fsl_mc_reflck {
-+	struct kref		kref;
-+	struct mutex		lock;
-+};
-+
- struct vfio_fsl_mc_region {
- 	u32			flags;
- 	u32			type;
-@@ -27,7 +32,7 @@ struct vfio_fsl_mc_device {
- 	int				refcnt;
- 	u32				num_regions;
- 	struct vfio_fsl_mc_region	*regions;
--	struct mutex driver_lock;
-+	struct vfio_fsl_mc_reflck   *reflck;
- };
- 
- #endif /* VFIO_PCI_PRIVATE_H */
diff --git a/target/linux/layerscape/patches-5.4/821-vfio-0007-vfio-fsl-mc-Add-irq-infrastructure-for-fsl-mc-device.patch b/target/linux/layerscape/patches-5.4/821-vfio-0007-vfio-fsl-mc-Add-irq-infrastructure-for-fsl-mc-device.patch
deleted file mode 100644
index 025b0371bd..0000000000
--- a/target/linux/layerscape/patches-5.4/821-vfio-0007-vfio-fsl-mc-Add-irq-infrastructure-for-fsl-mc-device.patch
+++ /dev/null
@@ -1,192 +0,0 @@
-From aa8dac23408e24432f7d6c404cddc8997a142bd6 Mon Sep 17 00:00:00 2001
-From: Diana Craciun <diana.craciun@nxp.com>
-Date: Mon, 30 Sep 2019 11:56:35 +0300
-Subject: [PATCH] vfio/fsl-mc: Add irq infrastructure for fsl-mc devices
-
-This patch adds the skeleton for interrupt support
-for fsl-mc devices. The interrupts are not yet functional,
-the functionality will be added by subsequent patches.
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
----
- drivers/vfio/fsl-mc/Makefile              |  2 +-
- drivers/vfio/fsl-mc/vfio_fsl_mc.c         | 71 ++++++++++++++++++++++++++++++-
- drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c    | 62 +++++++++++++++++++++++++++
- drivers/vfio/fsl-mc/vfio_fsl_mc_private.h |  5 +++
- 4 files changed, 137 insertions(+), 3 deletions(-)
- create mode 100644 drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c
-
---- a/drivers/vfio/fsl-mc/Makefile
-+++ b/drivers/vfio/fsl-mc/Makefile
-@@ -1,2 +1,2 @@
- vfio-fsl_mc-y := vfio_fsl_mc.o
--obj-$(CONFIG_VFIO_FSL_MC) += vfio_fsl_mc.o
-+obj-$(CONFIG_VFIO_FSL_MC) += vfio_fsl_mc.o vfio_fsl_mc_intr.o
---- a/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-@@ -208,11 +208,75 @@ static long vfio_fsl_mc_ioctl(void *devi
- 	}
- 	case VFIO_DEVICE_GET_IRQ_INFO:
- 	{
--		return -EINVAL;
-+		struct vfio_irq_info info;
-+
-+		minsz = offsetofend(struct vfio_irq_info, count);
-+		if (copy_from_user(&info, (void __user *)arg, minsz))
-+			return -EFAULT;
-+
-+		if (info.argsz < minsz)
-+			return -EINVAL;
-+
-+		if (info.index >= mc_dev->obj_desc.irq_count)
-+			return -EINVAL;
-+
-+		info.flags = VFIO_IRQ_INFO_EVENTFD;
-+		info.count = 1;
-+
-+		return copy_to_user((void __user *)arg, &info, minsz);
- 	}
- 	case VFIO_DEVICE_SET_IRQS:
- 	{
--		return -EINVAL;
-+		struct vfio_irq_set hdr;
-+		u8 *data = NULL;
-+		int ret = 0;
-+
-+		minsz = offsetofend(struct vfio_irq_set, count);
-+
-+		if (copy_from_user(&hdr, (void __user *)arg, minsz))
-+			return -EFAULT;
-+
-+		if (hdr.argsz < minsz)
-+			return -EINVAL;
-+
-+		if (hdr.index >= mc_dev->obj_desc.irq_count)
-+			return -EINVAL;
-+
-+		if (hdr.start != 0 || hdr.count > 1)
-+			return -EINVAL;
-+
-+		if (hdr.count == 0 &&
-+		    (!(hdr.flags & VFIO_IRQ_SET_DATA_NONE) ||
-+		    !(hdr.flags & VFIO_IRQ_SET_ACTION_TRIGGER)))
-+			return -EINVAL;
-+
-+		if (hdr.flags & ~(VFIO_IRQ_SET_DATA_TYPE_MASK |
-+				  VFIO_IRQ_SET_ACTION_TYPE_MASK))
-+			return -EINVAL;
-+
-+		if (!(hdr.flags & VFIO_IRQ_SET_DATA_NONE)) {
-+			size_t size;
-+
-+			if (hdr.flags & VFIO_IRQ_SET_DATA_BOOL)
-+				size = sizeof(uint8_t);
-+			else if (hdr.flags & VFIO_IRQ_SET_DATA_EVENTFD)
-+				size = sizeof(int32_t);
-+			else
-+				return -EINVAL;
-+
-+			if (hdr.argsz - minsz < hdr.count * size)
-+				return -EINVAL;
-+
-+			data = memdup_user((void __user *)(arg + minsz),
-+					   hdr.count * size);
-+			if (IS_ERR(data))
-+				return PTR_ERR(data);
-+		}
-+
-+		ret = vfio_fsl_mc_set_irqs_ioctl(vdev, hdr.flags,
-+						 hdr.index, hdr.start,
-+						 hdr.count, data);
-+		return ret;
- 	}
- 	case VFIO_DEVICE_RESET:
- 	{
-@@ -304,6 +368,9 @@ static int vfio_fsl_mc_init_device(struc
- 	int ret = 0;
- 	unsigned int irq_count;
- 
-+	/* innherit the msi domain from parent */
-+	dev_set_msi_domain(&mc_dev->dev, dev_get_msi_domain(mc_dev->dev.parent));
-+
- 	/* Non-dprc devices share mc_io from parent */
- 	if (!is_fsl_mc_bus_dprc(mc_dev)) {
- 		struct fsl_mc_device *mc_cont = to_fsl_mc_device(mc_dev->dev.parent);
---- /dev/null
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c
-@@ -0,0 +1,62 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-+/*
-+ * Copyright 2013-2016 Freescale Semiconductor Inc.
-+ * Copyright 2019 NXP
-+ */
-+
-+#include <linux/vfio.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/eventfd.h>
-+#include <linux/msi.h>
-+
-+#include "linux/fsl/mc.h"
-+#include "vfio_fsl_mc_private.h"
-+
-+static int vfio_fsl_mc_irq_mask(struct vfio_fsl_mc_device *vdev,
-+				unsigned int index, unsigned int start,
-+				unsigned int count, uint32_t flags,
-+				void *data)
-+{
-+	return -EINVAL;
-+}
-+
-+static int vfio_fsl_mc_irq_unmask(struct vfio_fsl_mc_device *vdev,
-+				unsigned int index, unsigned int start,
-+				unsigned int count, uint32_t flags,
-+				void *data)
-+{
-+	return -EINVAL;
-+}
-+
-+static int vfio_fsl_mc_set_irq_trigger(struct vfio_fsl_mc_device *vdev,
-+				       unsigned int index, unsigned int start,
-+				       unsigned int count, uint32_t flags,
-+				       void *data)
-+{
-+	return -EINVAL;
-+}
-+int vfio_fsl_mc_set_irqs_ioctl(struct vfio_fsl_mc_device *vdev,
-+			       uint32_t flags, unsigned int index,
-+			       unsigned int start, unsigned int count,
-+			       void *data)
-+{
-+	int ret = -ENOTTY;
-+
-+	switch (flags & VFIO_IRQ_SET_ACTION_TYPE_MASK) {
-+	case VFIO_IRQ_SET_ACTION_MASK:
-+		ret = vfio_fsl_mc_irq_mask(vdev, index, start, count,
-+					   flags, data);
-+		break;
-+	case VFIO_IRQ_SET_ACTION_UNMASK:
-+		ret = vfio_fsl_mc_irq_unmask(vdev, index, start, count,
-+					     flags, data);
-+		break;
-+	case VFIO_IRQ_SET_ACTION_TRIGGER:
-+		ret = vfio_fsl_mc_set_irq_trigger(vdev, index, start,
-+						  count, flags, data);
-+		break;
-+	}
-+
-+	return ret;
-+}
---- a/drivers/vfio/fsl-mc/vfio_fsl_mc_private.h
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc_private.h
-@@ -35,4 +35,9 @@ struct vfio_fsl_mc_device {
- 	struct vfio_fsl_mc_reflck   *reflck;
- };
- 
-+int vfio_fsl_mc_set_irqs_ioctl(struct vfio_fsl_mc_device *vdev,
-+			       uint32_t flags, unsigned int index,
-+			       unsigned int start, unsigned int count,
-+			       void *data);
-+
- #endif /* VFIO_PCI_PRIVATE_H */
diff --git a/target/linux/layerscape/patches-5.4/821-vfio-0008-vfio-fsl-mc-trigger-an-interrupt-via-eventfd.patch b/target/linux/layerscape/patches-5.4/821-vfio-0008-vfio-fsl-mc-trigger-an-interrupt-via-eventfd.patch
deleted file mode 100644
index 4f1e0997f7..0000000000
--- a/target/linux/layerscape/patches-5.4/821-vfio-0008-vfio-fsl-mc-trigger-an-interrupt-via-eventfd.patch
+++ /dev/null
@@ -1,268 +0,0 @@
-From 8f0239c9385028a0c15306966c66a56315b11dbc Mon Sep 17 00:00:00 2001
-From: Diana Craciun <diana.craciun@nxp.com>
-Date: Tue, 1 Oct 2019 16:44:04 +0300
-Subject: [PATCH] vfio/fsl-mc: trigger an interrupt via eventfd
-
-This patch allows to set an eventfd for fsl-mc device interrupt
-and also to trigger the interrupt eventfd from userspace for testing.
-
-All fsl-mc device interrupts are MSI type. This does not yet handle
-correctly DPRC container interrupt where re-scanning on container is
-required.
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
----
- drivers/vfio/fsl-mc/vfio_fsl_mc.c         |  20 +++-
- drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c    | 165 +++++++++++++++++++++++++++++-
- drivers/vfio/fsl-mc/vfio_fsl_mc_private.h |  10 ++
- 3 files changed, 193 insertions(+), 2 deletions(-)
-
---- a/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-@@ -144,12 +144,30 @@ err_reg_init:
- static void vfio_fsl_mc_release(void *device_data)
- {
- 	struct vfio_fsl_mc_device *vdev = device_data;
-+	int ret;
- 
- 	mutex_lock(&vdev->reflck->lock);
- 
--	if (!(--vdev->refcnt))
-+	if (!(--vdev->refcnt)) {
-+		struct fsl_mc_device *mc_dev = vdev->mc_dev;
-+		struct device *cont_dev = fsl_mc_cont_dev(&mc_dev->dev);
-+		struct fsl_mc_device *mc_cont = to_fsl_mc_device(cont_dev);
-+		struct fsl_mc_bus *mc_bus;
-+
-+		mc_bus = to_fsl_mc_bus(mc_cont);
-+
- 		vfio_fsl_mc_regions_cleanup(vdev);
- 
-+		/* reset the device before cleaning up the interrupts */
-+		ret = dprc_reset_container(mc_dev->mc_io, 0,
-+		      mc_dev->mc_handle,
-+			  mc_dev->obj_desc.id);
-+
-+		vfio_fsl_mc_irqs_cleanup(vdev);
-+
-+		fsl_mc_cleanup_irq_pool(mc_bus);
-+	}
-+
- 	mutex_unlock(&vdev->reflck->lock);
- 
- 	module_put(THIS_MODULE);
---- a/drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c
-@@ -29,12 +29,154 @@ static int vfio_fsl_mc_irq_unmask(struct
- 	return -EINVAL;
- }
- 
-+int vfio_fsl_mc_irqs_allocate(struct vfio_fsl_mc_device *vdev)
-+{
-+	struct fsl_mc_device *mc_dev = vdev->mc_dev;
-+	struct vfio_fsl_mc_irq *mc_irq;
-+	int irq_count;
-+	int ret, i;
-+
-+    /* Device does not support any interrupt */
-+	if (mc_dev->obj_desc.irq_count == 0)
-+		return 0;
-+
-+	/* interrupts were already allocated for this device */
-+	if (vdev->mc_irqs)
-+		return 0;
-+
-+	irq_count = mc_dev->obj_desc.irq_count;
-+
-+	mc_irq = kcalloc(irq_count, sizeof(*mc_irq), GFP_KERNEL);
-+	if (mc_irq == NULL)
-+		return -ENOMEM;
-+
-+	/* Allocate IRQs */
-+	ret = fsl_mc_allocate_irqs(mc_dev);
-+	if (ret) {
-+		kfree(mc_irq);
-+		return ret;
-+	}
-+
-+	for (i = 0; i < irq_count; i++) {
-+		mc_irq[i].count = 1;
-+		mc_irq[i].flags = VFIO_IRQ_INFO_EVENTFD;
-+	}
-+
-+	vdev->mc_irqs = mc_irq;
-+
-+	return 0;
-+}
-+static irqreturn_t vfio_fsl_mc_irq_handler(int irq_num, void *arg)
-+{
-+	struct vfio_fsl_mc_irq *mc_irq = (struct vfio_fsl_mc_irq *)arg;
-+
-+	eventfd_signal(mc_irq->trigger, 1);
-+	return IRQ_HANDLED;
-+}
-+
-+static int vfio_set_trigger(struct vfio_fsl_mc_device *vdev,
-+						   int index, int fd)
-+{
-+	struct vfio_fsl_mc_irq *irq = &vdev->mc_irqs[index];
-+	struct eventfd_ctx *trigger;
-+	int hwirq;
-+	int ret;
-+
-+	hwirq = vdev->mc_dev->irqs[index]->msi_desc->irq;
-+	if (irq->trigger) {
-+		free_irq(hwirq, irq);
-+		kfree(irq->name);
-+		eventfd_ctx_put(irq->trigger);
-+		irq->trigger = NULL;
-+	}
-+
-+	if (fd < 0) /* Disable only */
-+		return 0;
-+
-+	irq->name = kasprintf(GFP_KERNEL, "vfio-irq[%d](%s)",
-+			    hwirq, dev_name(&vdev->mc_dev->dev));
-+	if (!irq->name)
-+		return -ENOMEM;
-+
-+	trigger = eventfd_ctx_fdget(fd);
-+	if (IS_ERR(trigger)) {
-+		kfree(irq->name);
-+		return PTR_ERR(trigger);
-+	}
-+
-+	irq->trigger = trigger;
-+
-+	ret = request_irq(hwirq, vfio_fsl_mc_irq_handler, 0,
-+		  irq->name, irq);
-+	if (ret) {
-+		kfree(irq->name);
-+		eventfd_ctx_put(trigger);
-+		irq->trigger = NULL;
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
- static int vfio_fsl_mc_set_irq_trigger(struct vfio_fsl_mc_device *vdev,
- 				       unsigned int index, unsigned int start,
- 				       unsigned int count, uint32_t flags,
- 				       void *data)
- {
--	return -EINVAL;
-+	struct fsl_mc_device *mc_dev = vdev->mc_dev;
-+	struct fsl_mc_bus *mc_bus;
-+	int ret, hwirq;
-+	struct vfio_fsl_mc_irq *irq;
-+	struct device *cont_dev = fsl_mc_cont_dev(&mc_dev->dev);
-+	struct fsl_mc_device *mc_cont = to_fsl_mc_device(cont_dev);
-+
-+	if (start != 0 || count != 1)
-+		return -EINVAL;
-+
-+	mc_bus = to_fsl_mc_bus(mc_cont);
-+
-+	mutex_lock(&vdev->reflck->lock);
-+	if (!mc_bus->irq_resources) {
-+
-+		ret = fsl_mc_populate_irq_pool(mc_bus,
-+			FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS);
-+		if (ret)
-+			goto unlock;
-+	}
-+
-+	ret = vfio_fsl_mc_irqs_allocate(vdev);
-+	if (ret)
-+		goto unlock;
-+	mutex_unlock(&vdev->reflck->lock);
-+
-+	if (!count && (flags & VFIO_IRQ_SET_DATA_NONE))
-+		return vfio_set_trigger(vdev, index, -1);
-+
-+	if (flags & VFIO_IRQ_SET_DATA_EVENTFD) {
-+		int32_t fd = *(int32_t *)data;
-+
-+		return vfio_set_trigger(vdev, index, fd);
-+	}
-+
-+	hwirq = vdev->mc_dev->irqs[index]->msi_desc->irq;
-+
-+	irq = &vdev->mc_irqs[index];
-+
-+	if (flags & VFIO_IRQ_SET_DATA_NONE) {
-+		vfio_fsl_mc_irq_handler(hwirq, irq);
-+
-+	} else if (flags & VFIO_IRQ_SET_DATA_BOOL) {
-+		uint8_t trigger = *(uint8_t *)data;
-+
-+		if (trigger)
-+			vfio_fsl_mc_irq_handler(hwirq, irq);
-+	}
-+
-+	return 0;
-+
-+unlock:
-+	mutex_unlock(&vdev->reflck->lock);
-+	return ret;
- }
- int vfio_fsl_mc_set_irqs_ioctl(struct vfio_fsl_mc_device *vdev,
- 			       uint32_t flags, unsigned int index,
-@@ -60,3 +202,24 @@ int vfio_fsl_mc_set_irqs_ioctl(struct vf
- 
- 	return ret;
- }
-+
-+/* Free All IRQs for the given MC object */
-+void vfio_fsl_mc_irqs_cleanup(struct vfio_fsl_mc_device *vdev)
-+{
-+	struct fsl_mc_device *mc_dev = vdev->mc_dev;
-+	int irq_count = mc_dev->obj_desc.irq_count;
-+	int i;
-+
-+	/* Device does not support any interrupt or the interrupts
-+	 * were not configured
-+	 */
-+	if (mc_dev->obj_desc.irq_count == 0 || !vdev->mc_irqs)
-+		return;
-+
-+	for (i = 0; i < irq_count; i++)
-+		vfio_set_trigger(vdev, i, -1);
-+
-+	fsl_mc_free_irqs(mc_dev);
-+	kfree(vdev->mc_irqs);
-+	vdev->mc_irqs = NULL;
-+}
---- a/drivers/vfio/fsl-mc/vfio_fsl_mc_private.h
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc_private.h
-@@ -15,6 +15,13 @@
- #define VFIO_FSL_MC_INDEX_TO_OFFSET(index)	\
- 	((u64)(index) << VFIO_FSL_MC_OFFSET_SHIFT)
- 
-+struct vfio_fsl_mc_irq {
-+	u32         flags;
-+	u32         count;
-+	struct eventfd_ctx  *trigger;
-+	char            *name;
-+};
-+
- struct vfio_fsl_mc_reflck {
- 	struct kref		kref;
- 	struct mutex		lock;
-@@ -33,6 +40,7 @@ struct vfio_fsl_mc_device {
- 	u32				num_regions;
- 	struct vfio_fsl_mc_region	*regions;
- 	struct vfio_fsl_mc_reflck   *reflck;
-+	struct vfio_fsl_mc_irq      *mc_irqs;
- };
- 
- int vfio_fsl_mc_set_irqs_ioctl(struct vfio_fsl_mc_device *vdev,
-@@ -40,4 +48,6 @@ int vfio_fsl_mc_set_irqs_ioctl(struct vf
- 			       unsigned int start, unsigned int count,
- 			       void *data);
- 
-+void vfio_fsl_mc_irqs_cleanup(struct vfio_fsl_mc_device *vdev);
-+
- #endif /* VFIO_PCI_PRIVATE_H */
diff --git a/target/linux/layerscape/patches-5.4/821-vfio-0009-vfio-fsl-mc-Add-read-write-support-for-fsl-mc-device.patch b/target/linux/layerscape/patches-5.4/821-vfio-0009-vfio-fsl-mc-Add-read-write-support-for-fsl-mc-device.patch
deleted file mode 100644
index 5d3d9632ae..0000000000
--- a/target/linux/layerscape/patches-5.4/821-vfio-0009-vfio-fsl-mc-Add-read-write-support-for-fsl-mc-device.patch
+++ /dev/null
@@ -1,183 +0,0 @@
-From c4fbb93e85b13edc174fa6fc3105341f646305e4 Mon Sep 17 00:00:00 2001
-From: Diana Craciun <diana.craciun@nxp.com>
-Date: Wed, 2 Oct 2019 11:14:52 +0300
-Subject: [PATCH] vfio/fsl-mc: Add read/write support for fsl-mc devices
-
-This patch adds support to read and write ioctls for
-fsl-mc devices. Only read-write to DPRC/DPMCP devices
-are supported while read writes on other fsl-mc devices
-is not supported by this patch.
-
-Also current patch limits userspace to write complete
-64byte command once and read 64byte response by one ioctl.
-
-Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
-Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
----
- drivers/vfio/fsl-mc/vfio_fsl_mc.c         | 125 +++++++++++++++++++++++++++++-
- drivers/vfio/fsl-mc/vfio_fsl_mc_private.h |   1 +
- 2 files changed, 124 insertions(+), 2 deletions(-)
-
---- a/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-@@ -12,6 +12,7 @@
- #include <linux/types.h>
- #include <linux/vfio.h>
- #include <linux/fsl/mc.h>
-+#include <linux/delay.h>
- 
- #include "vfio_fsl_mc_private.h"
- 
-@@ -112,6 +113,11 @@ static int vfio_fsl_mc_regions_init(stru
- }
- static void vfio_fsl_mc_regions_cleanup(struct vfio_fsl_mc_device *vdev)
- {
-+	int i;
-+
-+	for (i = 0; i < vdev->num_regions; i++)
-+		iounmap(vdev->regions[i].ioaddr);
-+
- 	vdev->num_regions = 0;
- 	kfree(vdev->regions);
- }
-@@ -308,13 +314,128 @@ static long vfio_fsl_mc_ioctl(void *devi
- static ssize_t vfio_fsl_mc_read(void *device_data, char __user *buf,
- 				size_t count, loff_t *ppos)
- {
--	return -EINVAL;
-+	struct vfio_fsl_mc_device *vdev = device_data;
-+	unsigned int index = VFIO_FSL_MC_OFFSET_TO_INDEX(*ppos);
-+	loff_t off = *ppos & VFIO_FSL_MC_OFFSET_MASK;
-+	struct vfio_fsl_mc_region *region;
-+	uint64_t data[8];
-+	int i;
-+
-+	/* Read ioctl supported only for DPRC and DPMCP device */
-+	if (strcmp(vdev->mc_dev->obj_desc.type, "dprc") &&
-+	    strcmp(vdev->mc_dev->obj_desc.type, "dpmcp"))
-+		return -EINVAL;
-+
-+	if (index >= vdev->num_regions)
-+		return -EINVAL;
-+
-+	region = &vdev->regions[index];
-+
-+	if (!(region->flags & VFIO_REGION_INFO_FLAG_READ))
-+		return -EINVAL;
-+
-+
-+	if (!region->ioaddr) {
-+		region->ioaddr = ioremap_nocache(region->addr, region->size);
-+		if (!region->ioaddr)
-+			return -ENOMEM;
-+	}
-+
-+	if (count != 64 || off != 0)
-+		return -EINVAL;
-+
-+	for (i = 7; i >= 0; i--)
-+		data[i] = readq(region->ioaddr + i * sizeof(uint64_t));
-+
-+	if (copy_to_user(buf, data, 64))
-+		return -EFAULT;
-+
-+	return count;
- }
- 
-+#define MC_CMD_COMPLETION_TIMEOUT_MS    5000
-+#define MC_CMD_COMPLETION_POLLING_MAX_SLEEP_USECS    500
-+
-+static int vfio_fsl_mc_send_command(void __iomem *ioaddr, uint64_t *cmd_data)
-+{
-+	int i;
-+	enum mc_cmd_status status;
-+	unsigned long timeout_usecs = MC_CMD_COMPLETION_TIMEOUT_MS * 1000;
-+
-+	/* Write at command parameter into portal */
-+	for (i = 7; i >= 1; i--)
-+		writeq_relaxed(cmd_data[i], ioaddr + i * sizeof(uint64_t));
-+
-+	/* Write command header in the end */
-+	writeq(cmd_data[0], ioaddr);
-+
-+	/* Wait for response before returning to user-space
-+	 * This can be optimized in future to even prepare response
-+	 * before returning to user-space and avoid read ioctl.
-+	 */
-+	for (;;) {
-+		u64 header;
-+		struct mc_cmd_header *resp_hdr;
-+
-+		header = cpu_to_le64(readq_relaxed(ioaddr));
-+
-+		resp_hdr = (struct mc_cmd_header *)&header;
-+		status = (enum mc_cmd_status)resp_hdr->status;
-+		if (status != MC_CMD_STATUS_READY)
-+			break;
-+
-+		udelay(MC_CMD_COMPLETION_POLLING_MAX_SLEEP_USECS);
-+		timeout_usecs -= MC_CMD_COMPLETION_POLLING_MAX_SLEEP_USECS;
-+		if (timeout_usecs == 0)
-+			return -ETIMEDOUT;
-+	}
-+
-+	return 0;
-+}
-+
-+
- static ssize_t vfio_fsl_mc_write(void *device_data, const char __user *buf,
- 				 size_t count, loff_t *ppos)
- {
--	return -EINVAL;
-+	struct vfio_fsl_mc_device *vdev = device_data;
-+	unsigned int index = VFIO_FSL_MC_OFFSET_TO_INDEX(*ppos);
-+	loff_t off = *ppos & VFIO_FSL_MC_OFFSET_MASK;
-+	struct vfio_fsl_mc_region *region;
-+	uint64_t data[8];
-+	int ret;
-+
-+
-+	/* Write ioctl supported only for DPRC and DPMCP device */
-+	if (strcmp(vdev->mc_dev->obj_desc.type, "dprc") &&
-+	    strcmp(vdev->mc_dev->obj_desc.type, "dpmcp"))
-+		return -EINVAL;
-+
-+	if (index >= vdev->num_regions)
-+		return -EINVAL;
-+
-+	region = &vdev->regions[index];
-+
-+	if (!(region->flags & VFIO_REGION_INFO_FLAG_WRITE))
-+		return -EINVAL;
-+
-+	if (!region->ioaddr) {
-+		region->ioaddr = ioremap_nocache(region->addr, region->size);
-+		if (!region->ioaddr)
-+			return -ENOMEM;
-+	}
-+
-+	if (count != 64 || off != 0)
-+		return -EINVAL;
-+
-+	if (copy_from_user(&data, buf, 64))
-+		return -EFAULT;
-+
-+	ret = vfio_fsl_mc_send_command(region->ioaddr, data);
-+	if (ret)
-+		return ret;
-+
-+	return count;
-+
- }
- 
- static int vfio_fsl_mc_mmap_mmio(struct vfio_fsl_mc_region region,
---- a/drivers/vfio/fsl-mc/vfio_fsl_mc_private.h
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc_private.h
-@@ -32,6 +32,7 @@ struct vfio_fsl_mc_region {
- 	u32			type;
- 	u64			addr;
- 	resource_size_t		size;
-+	void __iomem		*ioaddr;
- };
- 
- struct vfio_fsl_mc_device {
diff --git a/target/linux/layerscape/patches-5.4/821-vfio-0010-vfio-fsl-mc-Map-the-VFIO-region-according-to-the-fla.patch b/target/linux/layerscape/patches-5.4/821-vfio-0010-vfio-fsl-mc-Map-the-VFIO-region-according-to-the-fla.patch
deleted file mode 100644
index 1ddbd8e985..0000000000
--- a/target/linux/layerscape/patches-5.4/821-vfio-0010-vfio-fsl-mc-Map-the-VFIO-region-according-to-the-fla.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 41a18521d40ed19c2e22d8e41cc427d18f082b71 Mon Sep 17 00:00:00 2001
-From: Diana Craciun <diana.craciun@nxp.com>
-Date: Mon, 18 Nov 2019 16:32:08 +0200
-Subject: [PATCH] vfio/fsl-mc: Map the VFIO region according to the flags
- received from mc firmware
-
-There are some VFIO regions which are cacheable (QMAN CENA region).
-These regions should be mapped cacheable.
-
-Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
----
- drivers/vfio/fsl-mc/vfio_fsl_mc.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc.c
-@@ -106,6 +106,7 @@ static int vfio_fsl_mc_regions_init(stru
- 		vdev->regions[i].flags |= VFIO_REGION_INFO_FLAG_READ;
- 		if (!(mc_dev->regions[i].flags & IORESOURCE_READONLY))
- 			vdev->regions[i].flags |= VFIO_REGION_INFO_FLAG_WRITE;
-+		vdev->regions[i].type = mc_dev->regions[i].flags & IORESOURCE_BITS;
- 	}
- 
- 	vdev->num_regions = mc_dev->obj_desc.region_count;
-@@ -451,7 +452,12 @@ static int vfio_fsl_mc_mmap_mmio(struct
- 	if (region.size < PAGE_SIZE || base + size > region.size)
- 		return -EINVAL;
- 
--	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-+	if (region.type & DPRC_REGION_CACHEABLE) {
-+		if (!(region.type & DPRC_REGION_SHAREABLE))
-+			vma->vm_page_prot = pgprot_cached_ns(vma->vm_page_prot);
-+	} else
-+		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-+
- 	vma->vm_pgoff = (region.addr >> PAGE_SHIFT) + pgoff;
- 
- 	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
diff --git a/target/linux/layerscape/patches-5.4/900-layerscape_fix_support_of_LS1012A-RDB.patch b/target/linux/layerscape/patches-5.4/900-layerscape_fix_support_of_LS1012A-RDB.patch
deleted file mode 100644
index bcad654e5c..0000000000
--- a/target/linux/layerscape/patches-5.4/900-layerscape_fix_support_of_LS1012A-RDB.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From 650480191492845c8eb7e0c2e5b1e37cabc59eff Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Fri, 13 Nov 2020 07:17:39 +0100
-Subject: [PATCH 1/2] arm64: dts: fsl-ls1012a-rdb: add i2c devices
-
-LS1012A-RDB equipped in some i2c devices:
-  - 3x GPIO Expander: PCAL9555A (NXP)
-  - Gyro: FXAS21002 (NXP)
-  - Accelerometer: FXOS8700 (NXP)
-  - Current & Power Monitor: INA220 (TI)
-
-This patch add listed devices to dts.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- .../boot/dts/freescale/fsl-ls1012a-rdb.dts    | 66 +++++++++++++++++++
- 1 file changed, 66 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-@@ -7,6 +7,7 @@
-  */
- /dts-v1/;
- 
-+#include <dt-bindings/interrupt-controller/irq.h>
- #include "fsl-ls1012a.dtsi"
- 
- / {
-@@ -16,6 +17,25 @@
- 	aliases {
- 		ethernet0 = &pfe_mac0;
- 		ethernet1 = &pfe_mac1;
-+		serial0 = &duart0;
-+	};
-+
-+	dummy3v3: dummy_reg {
-+		compatible = "regulator-fixed";
-+		regulator-name = "dummy_regulator_3v3";
-+
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		regulator-always-on;
-+	};
-+
-+	dummy1v8: dummy_reg {
-+		compatible = "regulator-fixed";
-+		regulator-name = "dummy_regulator_1v8";
-+
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <1800000>;
-+		regulator-always-on;
- 	};
- };
- 
-@@ -42,6 +62,52 @@
- 
- &i2c0 {
- 	status = "okay";
-+
-+	accelerometer@1e {
-+		compatible = "nxp,fxos8700";
-+		reg = <0x1e>;
-+		interrupt-parent = <&gpio26>;
-+		interrupts = <13 IRQ_TYPE_EDGE_RISING>;
-+		interrupt-names = "INT1";
-+	};
-+
-+	gyroscope@20 {
-+		compatible = "nxp,fxas21002c";
-+		reg = <0x20>;
-+		vdd-supply = <&dummy3v3>;
-+		vddio-supply = <&dummy1v8>;
-+	};
-+
-+	gpio@24 {
-+		compatible = "nxp,pcal9555a";
-+		reg = <0x24>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+	};
-+
-+	gpio25: gpio@25 {
-+		compatible = "nxp,pcal9555a";
-+		reg = <0x25>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+	};
-+
-+	gpio26: gpio@26 {
-+		compatible = "nxp,pcal9555a";
-+		reg = <0x26>;
-+		interrupt-parent = <&gpio0>;
-+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-+		interrupt-controller;
-+		#interrupt-cells = <2>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+	};
-+
-+	current-sensor@40 {
-+		compatible = "ti,ina220";
-+		reg = <0x40>;
-+		shunt-resistor = <2000>;
-+	};
- };
- 
- &sata {
diff --git a/target/linux/layerscape/patches-5.4/901-fix_irq_type_of_pca953x.patch b/target/linux/layerscape/patches-5.4/901-fix_irq_type_of_pca953x.patch
deleted file mode 100644
index 5f022ac27f..0000000000
--- a/target/linux/layerscape/patches-5.4/901-fix_irq_type_of_pca953x.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 12de4b5e7cbcd193d5abb753ca511fe8f2236846 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Fri, 13 Nov 2020 07:30:03 +0100
-Subject: [PATCH 1/1] gpio-pca953x: hack: Allow to use falling trigger
-
-Gpio-mpc8xxx driver of Layerscape gpio support only edge interrupts.
-Gpio-pca953x allow only low state trigger. This hack fix the problem.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
-
---- a/drivers/gpio/gpio-pca953x.c
-+++ b/drivers/gpio/gpio-pca953x.c
-@@ -881,10 +881,12 @@ static int pca953x_irq_setup(struct pca9
- 	for (i = 0; i < NBANK(chip); i++)
- 		chip->irq_stat[i] &= reg_direction[i];
- 	mutex_init(&chip->irq_lock);
--
-+	/* gpio-mpc8xxx driver of Layerscape gpio support only edge interrupts.
-+	 * This hack fix the problem.
-+	 */
- 	ret = devm_request_threaded_irq(&client->dev, client->irq,
- 					NULL, pca953x_irq_handler,
--					IRQF_TRIGGER_LOW | IRQF_ONESHOT |
-+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
- 					IRQF_SHARED,
- 					dev_name(&client->dev), chip);
- 	if (ret) {
diff --git a/target/linux/layerscape/patches-5.4/902-layerscape_improve_support_of_LS1012A-FRDM.patch b/target/linux/layerscape/patches-5.4/902-layerscape_improve_support_of_LS1012A-FRDM.patch
deleted file mode 100644
index 62edf43a35..0000000000
--- a/target/linux/layerscape/patches-5.4/902-layerscape_improve_support_of_LS1012A-FRDM.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 12de4b5e7cbcd193d5abb753ca511fe8f2236846 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Fri, 13 Nov 2020 07:30:03 +0100
-Subject: [PATCH 2/2] arm64: dts: fsl-ls1012a-frdm: add spi-uart device
-
-This patch adds spi-uart controller  to LS1012A-FRDM board dts.
-Device is equipped in SC16IS740 from NXP.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- .../boot/dts/freescale/fsl-ls1012a-frdm.dts   | 21 +++++++++++++++++++
- 1 file changed, 21 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
-@@ -7,6 +7,7 @@
-  */
- /dts-v1/;
- 
-+#include <dt-bindings/interrupt-controller/irq.h>
- #include "fsl-ls1012a.dtsi"
- 
- / {
-@@ -16,6 +17,7 @@
- 	aliases {
- 		ethernet0 = &pfe_mac0;
- 		ethernet1 = &pfe_mac1;
-+		serial0 = &duart0;
- 	};
- 
- 	sys_mclk: clock-mclk {
-@@ -61,6 +63,26 @@
- 		};
- 	};
- };
-+
-+&dspi {
-+	status = "okay";
-+	bus-num = <0>;
-+
-+	serial@0 {
-+		reg = <0>;
-+		compatible = "nxp,sc16is740";
-+		spi-max-frequency = <4000000>;
-+		clocks = <&sc16is7xx_clk>;
-+		interrupt-parent = <&gpio1>;
-+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-+
-+		sc16is7xx_clk: sc16is7xx_clk {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <24000000>;
-+		};
-+	};
-+};
- 
- &duart0 {
- 	status = "okay";
diff --git a/target/linux/octeon/config-5.4 b/target/linux/octeon/config-5.4
deleted file mode 100644
index b591159db0..0000000000
--- a/target/linux/octeon/config-5.4
+++ /dev/null
@@ -1,252 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS=12
-CONFIG_ARCH_MMAP_RND_BITS_MAX=18
-CONFIG_ARCH_MMAP_RND_BITS_MIN=12
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BUILTIN_DTB=y
-CONFIG_CAVIUM_CN63XXP1=y
-CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE=0
-CONFIG_CAVIUM_OCTEON_LOCK_L2=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_MEMCPY=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB=y
-CONFIG_CAVIUM_OCTEON_SOC=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_CAVIUM_OCTEON=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_LOAD_STORE_LR=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_HUGEPAGES=y
-CONFIG_CRAMFS=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_MD5_OCTEON is not set
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-# CONFIG_CRYPTO_SHA1_OCTEON is not set
-# CONFIG_CRYPTO_SHA256_OCTEON is not set
-# CONFIG_CRYPTO_SHA512_OCTEON is not set
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_LEGACY_SYSFS=y
-CONFIG_EDAC_OCTEON_L2C=y
-CONFIG_EDAC_OCTEON_LMC=y
-CONFIG_EDAC_OCTEON_PC=y
-CONFIG_EDAC_OCTEON_PCI=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_F2FS_FS=y
-CONFIG_FAT_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FRAME_WARN=2048
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_OCTEON=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OCTEON=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_OCTEON=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_CAVIUM=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_OCTEON=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-# CONFIG_MIPS32_N32 is not set
-# CONFIG_MIPS32_O32 is not set
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_MIPS_CMDLINE_FROM_DTB is not set
-CONFIG_MIPS_EBPF_JIT=y
-CONFIG_MIPS_ELF_APPENDED_DTB=y
-CONFIG_MIPS_L1_CACHE_SHIFT=7
-CONFIG_MIPS_L1_CACHE_SHIFT_7=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_NR_CPU_NR_MAP=1024
-CONFIG_MIPS_NR_CPU_NR_MAP_1024=y
-CONFIG_MIPS_PGD_C0_CONTEXT=y
-# CONFIG_MIPS_RAW_APPENDED_DTB is not set
-CONFIG_MIPS_SPRAM=y
-# CONFIG_MIPS_VA_BITS_48 is not set
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_CAVIUM_OCTEON=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NR_CPUS=16
-CONFIG_NR_CPUS_DEFAULT_64=y
-CONFIG_NVMEM=y
-CONFIG_OCTEON_ETHERNET=y
-CONFIG_OCTEON_ILM=y
-CONFIG_OCTEON_MGMT_ETHERNET=y
-CONFIG_OCTEON_USB=y
-CONFIG_OCTEON_WDT=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PADATA=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RAS=y
-CONFIG_RELAY=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_SCSI=y
-CONFIG_SECCOMP=y
-CONFIG_SECCOMP_FILTER=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_OCTEON=y
-CONFIG_SRCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_CAVIUM_OCTEON=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_RELOCATABLE=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PLATFORM=y
-# CONFIG_USB_OCTEON_EHCI is not set
-# CONFIG_USB_OCTEON_OHCI is not set
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VFAT_FS=y
-CONFIG_VITESSE_PHY=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_XPS=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA32=y
diff --git a/target/linux/octeon/patches-5.4/100-ubnt_edgerouter2_support.patch b/target/linux/octeon/patches-5.4/100-ubnt_edgerouter2_support.patch
deleted file mode 100644
index 7fdd36e31f..0000000000
--- a/target/linux/octeon/patches-5.4/100-ubnt_edgerouter2_support.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-@@ -295,6 +295,8 @@ enum cvmx_board_types_enum {
- 	 */
- 	CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
- 	CVMX_BOARD_TYPE_UBNT_E100 = 20002,
-+	CVMX_BOARD_TYPE_UBNT_E200 = 20003,
-+	CVMX_BOARD_TYPE_UBNT_E220 = 20005,
- 	CVMX_BOARD_TYPE_CUST_DSR1000N = 20006,
- 	CVMX_BOARD_TYPE_KONTRON_S1901 = 21901,
- 	CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
-@@ -396,6 +398,8 @@ static inline const char *cvmx_board_typ
- 		    /* Customer private range */
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
-+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E200)
-+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E220)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DSR1000N)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KONTRON_S1901)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
---- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
-+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
-@@ -174,6 +174,8 @@ int cvmx_helper_board_get_mii_address(in
- 			return 7 - ipd_port;
- 		else
- 			return -1;
-+	case CVMX_BOARD_TYPE_UBNT_E200:
-+		return -1;
- 	case CVMX_BOARD_TYPE_KONTRON_S1901:
- 		if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
- 			return 1;
diff --git a/target/linux/octeon/patches-5.4/110-er200-ethernet_probe_order.patch b/target/linux/octeon/patches-5.4/110-er200-ethernet_probe_order.patch
deleted file mode 100644
index 1c04f5c57b..0000000000
--- a/target/linux/octeon/patches-5.4/110-er200-ethernet_probe_order.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/drivers/staging/octeon/ethernet.c
-+++ b/drivers/staging/octeon/ethernet.c
-@@ -679,6 +679,7 @@ static int cvm_oct_probe(struct platform
- 	int interface;
- 	int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE;
- 	int qos;
-+	int i;
- 	struct device_node *pip;
- 	int mtu_overhead = ETH_HLEN + ETH_FCS_LEN;
- 
-@@ -802,13 +803,19 @@ static int cvm_oct_probe(struct platform
- 	}
- 
- 	num_interfaces = cvmx_helper_get_number_of_interfaces();
--	for (interface = 0; interface < num_interfaces; interface++) {
--		cvmx_helper_interface_mode_t imode =
--		    cvmx_helper_interface_get_mode(interface);
--		int num_ports = cvmx_helper_ports_on_interface(interface);
-+	for (i = 0; i < num_interfaces; i++) {
-+		cvmx_helper_interface_mode_t imode;
-+		int interface;
-+		int num_ports;
- 		int port;
- 		int port_index;
- 
-+		interface = i;
-+		if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_UBNT_E200)
-+			interface = num_interfaces - (i + 1);
-+
-+		num_ports = cvmx_helper_ports_on_interface(interface);
-+		imode = cvmx_helper_interface_get_mode(interface);
- 		for (port_index = 0,
- 		     port = cvmx_helper_get_ipd_port(interface, 0);
- 		     port < cvmx_helper_get_ipd_port(interface, num_ports);
diff --git a/target/linux/octeon/patches-5.4/120-cmdline-hack.patch b/target/linux/octeon/patches-5.4/120-cmdline-hack.patch
deleted file mode 100644
index 6c02ea3194..0000000000
--- a/target/linux/octeon/patches-5.4/120-cmdline-hack.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/arch/mips/cavium-octeon/setup.c
-+++ b/arch/mips/cavium-octeon/setup.c
-@@ -653,6 +653,35 @@ void octeon_user_io_init(void)
- 	write_c0_derraddr1(0);
- }
- 
-+#ifdef CONFIG_IMAGE_CMDLINE_HACK
-+extern char __image_cmdline[];
-+
-+static int __init octeon_use_image_cmdline(void)
-+{
-+       char *p = __image_cmdline;
-+       int replace = 0;
-+
-+       if (*p == '-') {
-+               replace = 1;
-+               p++;
-+       }
-+
-+       if (*p == '\0')
-+               return 0;
-+
-+       if (replace) {
-+               strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
-+       } else {
-+               strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
-+               strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
-+       }
-+
-+       return 1;
-+}
-+#else
-+static inline int octeon_use_image_cmdline(void) { return 0; }
-+#endif
-+
- /**
-  * Early entry point for arch setup
-  */
-@@ -897,6 +926,8 @@ void __init prom_init(void)
- 		}
- 	}
- 
-+	octeon_use_image_cmdline();
-+
- 	if (strstr(arcs_cmdline, "console=") == NULL) {
- 		if (octeon_uart == 1)
- 			strcat(arcs_cmdline, " console=ttyS1,115200");
diff --git a/target/linux/octeon/patches-5.4/130-itus_shield_support.patch b/target/linux/octeon/patches-5.4/130-itus_shield_support.patch
deleted file mode 100644
index 15f514209d..0000000000
--- a/target/linux/octeon/patches-5.4/130-itus_shield_support.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-@@ -297,7 +297,7 @@ enum cvmx_board_types_enum {
- 	CVMX_BOARD_TYPE_UBNT_E100 = 20002,
- 	CVMX_BOARD_TYPE_UBNT_E200 = 20003,
- 	CVMX_BOARD_TYPE_UBNT_E220 = 20005,
--	CVMX_BOARD_TYPE_CUST_DSR1000N = 20006,
-+	CVMX_BOARD_TYPE_ITUS_SHIELD = 20006,
- 	CVMX_BOARD_TYPE_KONTRON_S1901 = 21901,
- 	CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
- 
-@@ -400,7 +400,7 @@ static inline const char *cvmx_board_typ
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E200)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E220)
--		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DSR1000N)
-+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_ITUS_SHIELD)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KONTRON_S1901)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
- 	}
---- a/arch/mips/cavium-octeon/octeon-platform.c
-+++ b/arch/mips/cavium-octeon/octeon-platform.c
-@@ -773,7 +773,7 @@ int __init octeon_prune_device_tree(void
- 	if (fdt_check_header(initial_boot_params))
- 		panic("Corrupt Device Tree.");
- 
--	WARN(octeon_bootinfo->board_type == CVMX_BOARD_TYPE_CUST_DSR1000N,
-+	WARN(octeon_bootinfo->board_type == CVMX_BOARD_TYPE_ITUS_SHIELD,
- 	     "Built-in DTB booting is deprecated on %s. Please switch to use appended DTB.",
- 	     cvmx_board_type_to_string(octeon_bootinfo->board_type));
- 
---- a/arch/mips/pci/pci-octeon.c
-+++ b/arch/mips/pci/pci-octeon.c
-@@ -211,8 +211,6 @@ const char *octeon_get_pci_interrupts(vo
- 		return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA";
- 	case CVMX_BOARD_TYPE_BBGW_REF:
- 		return "AABCD";
--	case CVMX_BOARD_TYPE_CUST_DSR1000N:
--		return "CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC";
- 	case CVMX_BOARD_TYPE_THUNDER:
- 	case CVMX_BOARD_TYPE_EBH3000:
- 	default:
diff --git a/target/linux/octeon/patches-5.4/140-octeon_e300_support.patch b/target/linux/octeon/patches-5.4/140-octeon_e300_support.patch
deleted file mode 100644
index 7fe56a47d1..0000000000
--- a/target/linux/octeon/patches-5.4/140-octeon_e300_support.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-@@ -298,6 +298,7 @@ enum cvmx_board_types_enum {
- 	CVMX_BOARD_TYPE_UBNT_E200 = 20003,
- 	CVMX_BOARD_TYPE_UBNT_E220 = 20005,
- 	CVMX_BOARD_TYPE_ITUS_SHIELD = 20006,
-+	CVMX_BOARD_TYPE_UBNT_E300 = 20300,
- 	CVMX_BOARD_TYPE_KONTRON_S1901 = 21901,
- 	CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
- 
-@@ -401,6 +402,7 @@ static inline const char *cvmx_board_typ
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E200)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E220)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_ITUS_SHIELD)
-+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E300)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KONTRON_S1901)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
- 	}
diff --git a/target/linux/octeon/patches-5.4/700-allocate_interface_by_label.patch b/target/linux/octeon/patches-5.4/700-allocate_interface_by_label.patch
deleted file mode 100644
index e4dc3f96e5..0000000000
--- a/target/linux/octeon/patches-5.4/700-allocate_interface_by_label.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: Roman Kuzmitskii <damex.pp@icloud.com>
-Date: Wed, 28 Oct 2020 19:00:00 +0000
-Subject: [PATCH] staging: octeon: add net-labels support
-
-With this patch, device name can be set within dts file
-in the same way as dsa port can.
-
-Add label to pip interface node to use this feature:
-label = "lan0";
-
-Tested-by: Johannes Kimmel <fff@bareminimum.eu>
-Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
---- a/drivers/staging/octeon/ethernet.c
-+++ b/drivers/staging/octeon/ethernet.c
-@@ -407,8 +407,12 @@ static int cvm_oct_common_set_mac_addres
- int cvm_oct_common_init(struct net_device *dev)
- {
- 	struct octeon_ethernet *priv = netdev_priv(dev);
-+	const u8 *label = NULL;
- 	int ret;
- 
-+	if (priv->of_node)
-+		label = of_get_property(priv->of_node, "label", NULL);
-+
- 	ret = of_get_mac_address(priv->of_node, dev->dev_addr);
- 	if (ret)
- 		eth_hw_addr_random(dev);
-@@ -441,6 +445,9 @@ int cvm_oct_common_init(struct net_devic
- 	if (dev->netdev_ops->ndo_stop)
- 		dev->netdev_ops->ndo_stop(dev);
- 
-+	if (!IS_ERR_OR_NULL(label))
-+		dev_alloc_name(dev, label);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/octeon/patches-5.4/701-honor_sgmii_node_device_tree_status.patch b/target/linux/octeon/patches-5.4/701-honor_sgmii_node_device_tree_status.patch
deleted file mode 100644
index 77dd085b2b..0000000000
--- a/target/linux/octeon/patches-5.4/701-honor_sgmii_node_device_tree_status.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Roman Kuzmitskii <damex.pp@icloud.com>
-Date: Sun, 01 Nov 2020 19:00:00 +0000
-Subject: [PATCH] staging: octeon: sgmii to honor disabled dt node status
-
-With this patch, sgmii interface device tree node could be disabled and
-that disabled interface will not be unnecessarily initialized.
-
-It solves the problem with Octeon boards that have 8 sgmii or more ports
-initialized but have nothing connected to them.
-
-Tested-by: Johannes Kimmel <fff@bareminimum.eu>
-Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
---- a/drivers/staging/octeon/ethernet.c
-+++ b/drivers/staging/octeon/ethernet.c
-@@ -882,8 +882,10 @@ static int cvm_oct_probe(struct platform
- 
- 			case CVMX_HELPER_INTERFACE_MODE_SGMII:
- 				priv->phy_mode = PHY_INTERFACE_MODE_SGMII;
--				dev->netdev_ops = &cvm_oct_sgmii_netdev_ops;
--				strscpy(dev->name, "eth%d", sizeof(dev->name));
-+				if (of_device_is_available(priv->of_node)) {
-+					dev->netdev_ops = &cvm_oct_sgmii_netdev_ops;
-+					strscpy(dev->name, "eth%d", sizeof(dev->name));
-+				}
- 				break;
- 
- 			case CVMX_HELPER_INTERFACE_MODE_SPI:
diff --git a/target/linux/octeontx/config-5.4 b/target/linux/octeontx/config-5.4
deleted file mode 100644
index e6a44d2ac3..0000000000
--- a/target/linux/octeontx/config-5.4
+++ /dev/null
@@ -1,580 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y
-CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_KEEPINITRD=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PTE_DEVMAP=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
-CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
-CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_HEADER=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_INLINE_READ_LOCK=y
-CONFIG_ARCH_INLINE_READ_LOCK_BH=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_READ_UNLOCK=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_SPIN_LOCK=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_WRITE_LOCK=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=33
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_INT128=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_THUNDER=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_USE_MEMREMAP_PROT=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CNP=y
-CONFIG_ARM64_CONT_SHIFT=4
-CONFIG_ARM64_CRYPTO=y
-CONFIG_ARM64_ERRATUM_819472=y
-CONFIG_ARM64_ERRATUM_824069=y
-CONFIG_ARM64_ERRATUM_826319=y
-CONFIG_ARM64_ERRATUM_827319=y
-CONFIG_ARM64_ERRATUM_843419=y
-CONFIG_ARM64_HW_AFDBM=y
-CONFIG_ARM64_MODULE_PLTS=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_UAO=y
-CONFIG_ARM64_VA_BITS=48
-# CONFIG_ARM64_VA_BITS_39 is not set
-CONFIG_ARM64_VA_BITS_48=y
-CONFIG_ARM64_VHE=y
-CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
-CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_ARM_SBSA_WATCHDOG=y
-# CONFIG_ARM_SCMI_PROTOCOL is not set
-CONFIG_ATA=y
-# CONFIG_ATA_SFF is not set
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_BALLOON_COMPACTION=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_BSGLIB=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_CAVIUM_ERRATUM_22375=y
-CONFIG_CAVIUM_ERRATUM_23144=y
-CONFIG_CAVIUM_ERRATUM_23154=y
-CONFIG_CAVIUM_ERRATUM_27456=y
-CONFIG_CAVIUM_ERRATUM_30115=y
-CONFIG_CC_HAS_KASAN_GENERIC=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_CS2000_CP=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRASH_DUMP=y
-CONFIG_CRC16=y
-CONFIG_CRC7=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES_ARM64=y
-# CONFIG_CRYPTO_AES_ARM64_BS is not set
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set
-CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-# CONFIG_CRYPTO_CRCT10DIF_ARM64_CE is not set
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA256_ARM64=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-# CONFIG_CRYPTO_SHA512_ARM64 is not set
-CONFIG_CRYPTO_SIMD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DRM_RCAR_WRITEBACK=y
-CONFIG_DTC=y
-CONFIG_DT_IDLE_STATES=y
-CONFIG_EDAC=y
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_LEGACY_SYSFS=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EDAC_THUNDERX=y
-# CONFIG_EDAC_XGENE is not set
-CONFIG_EEPROM_AT24=y
-CONFIG_EFI_EARLYCON=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_F2FS_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_FAT_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_AUTOSELECT=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_THUNDERX=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_STACKLEAK=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARCH_VMAP_STACK=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_ASM_MODVERSIONS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_BUGVERBOSE=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FAST_GUP=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
-CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_VDSO=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_PATA_PLATFORM=y
-CONFIG_HAVE_PCI=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SCHED_AVG_IRQ=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HIBERNATION=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_HWSPINLOCK=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_CAVIUM=y
-CONFIG_HW_RANDOM_OPTEE=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_SMBUS=y
-CONFIG_I2C_THUNDERX=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INLINE_READ_LOCK=y
-CONFIG_INLINE_READ_LOCK_BH=y
-CONFIG_INLINE_READ_LOCK_IRQ=y
-CONFIG_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_INLINE_READ_UNLOCK_BH=y
-CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_SPIN_LOCK=y
-CONFIG_INLINE_SPIN_LOCK_BH=y
-CONFIG_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_INLINE_SPIN_TRYLOCK=y
-CONFIG_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_WRITE_LOCK=y
-CONFIG_INLINE_WRITE_LOCK_BH=y
-CONFIG_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_TIME_ACCOUNTING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-CONFIG_JBD2=y
-CONFIG_JUMP_LABEL=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KSM=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_CAVIUM=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_THUNDER=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_BALLOON=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MEMTEST=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_CAVIUM_THUNDERX=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MSDOS_FS=y
-# CONFIG_MTD is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NODES_SHIFT=2
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=64
-CONFIG_NUMA=y
-CONFIG_NUMA_BALANCING=y
-CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_NUMA=y
-CONFIG_OPTEE=y
-CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1
-CONFIG_PADATA=y
-CONFIG_PARAVIRT=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_ATS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_ECAM=y
-CONFIG_PCI_HOST_COMMON=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_HOST_THUNDER_ECAM=y
-CONFIG_PCI_HOST_THUNDER_PEM=y
-CONFIG_PCI_IOV=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PGTABLE_LEVELS=4
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_STD_PARTITION=""
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_RESET_XGENE=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PROC_VMCORE=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-# CONFIG_RAVE_SP_CORE is not set
-# CONFIG_READ_ONLY_THP_FOR_FS is not set
-CONFIG_REBOOT_MODE=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1672=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SCHED_INFO=y
-CONFIG_SCHED_MC=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SCSI_SAS_ATA=y
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SAS_LIBSAS=y
-CONFIG_SECCOMP=y
-CONFIG_SECCOMP_FILTER=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_THUNDERX=y
-CONFIG_SRAM=y
-CONFIG_SRCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSCON_REBOOT_MODE=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_TASK_XACCT=y
-CONFIG_TEE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_THUNDER_NIC_BGX=y
-CONFIG_THUNDER_NIC_PF=y
-CONFIG_THUNDER_NIC_RGX=y
-CONFIG_THUNDER_NIC_VF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
-# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
-CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_PCI=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PCI=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USE_PERCPU_NUMA_NODE_ID=y
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BALLOON=y
-# CONFIG_VIRTIO_BLK is not set
-# CONFIG_VIRTIO_CONSOLE is not set
-CONFIG_VIRTIO_MMIO=y
-# CONFIG_VIRTIO_NET is not set
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_PCI_LEGACY=y
-CONFIG_VMAP_STACK=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XARRAY_MULTI=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_ZONE_DMA32=y
diff --git a/target/linux/octeontx/patches-5.4/0001-net-thunderx-use-proper-interface-type-for-RGMII.patch b/target/linux/octeontx/patches-5.4/0001-net-thunderx-use-proper-interface-type-for-RGMII.patch
deleted file mode 100644
index 6f144b6db8..0000000000
--- a/target/linux/octeontx/patches-5.4/0001-net-thunderx-use-proper-interface-type-for-RGMII.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 2d3da16317086ba6048c601ee88cdc96f19fd741 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Fri, 7 Feb 2020 12:40:26 -0800
-Subject: [PATCH 01/12] net: thunderx: use proper interface type for RGMII
-
-The configuration of the OCTEONTX XCV_DLL_CTL register via
-xcv_init_hw() is such that the RGMII RX delay is bypassed
-leaving the RGMII TX delay enabled in the MAC:
-
-	/* Configure DLL - enable or bypass
-	 * TX no bypass, RX bypass
-	 */
-	cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL);
-	cfg &= ~0xFF03;
-	cfg |= CLKRX_BYP;
-	writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL);
-
-This would coorespond to a interface type of PHY_INTERFACE_MODE_RGMII_RXID
-and not PHY_INTERFACE_MODE_RGMII.
-
-Fixing this allows RGMII PHY drivers to do the right thing (enable
-RX delay in the PHY) instead of erroneously enabling both delays in the
-PHY.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
-+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
-@@ -1048,7 +1048,7 @@ static int phy_interface_mode(u8 lmac_ty
- 	if (lmac_type == BGX_MODE_QSGMII)
- 		return PHY_INTERFACE_MODE_QSGMII;
- 	if (lmac_type == BGX_MODE_RGMII)
--		return PHY_INTERFACE_MODE_RGMII;
-+		return PHY_INTERFACE_MODE_RGMII_RXID;
- 
- 	return PHY_INTERFACE_MODE_SGMII;
- }
diff --git a/target/linux/octeontx/patches-5.4/0002-gpio-thunderx-fix-irq_request_resources.patch b/target/linux/octeontx/patches-5.4/0002-gpio-thunderx-fix-irq_request_resources.patch
deleted file mode 100644
index 44d91da529..0000000000
--- a/target/linux/octeontx/patches-5.4/0002-gpio-thunderx-fix-irq_request_resources.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From e8287ec10f21877eb0ac4c1fb4e89e42d8bc10da Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Wed, 11 Mar 2020 08:19:45 -0700
-Subject: [PATCH 2/7] gpio: thunderx: fix irq_request_resources
-
-If there are no parent resources do not call irq_chip_request_resources_parent
-at all as this will return an error.
-
-This resolves a regression where devices using a thunderx gpio as an interrupt
-would fail probing.
-
-Fixes: 0d04d0c ("gpio: thunderx: Use the default parent apis for {request,release}_resources")
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/gpio/gpio-thunderx.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/gpio/gpio-thunderx.c
-+++ b/drivers/gpio/gpio-thunderx.c
-@@ -363,15 +363,18 @@ static int thunderx_gpio_irq_request_res
- {
- 	struct thunderx_line *txline = irq_data_get_irq_chip_data(data);
- 	struct thunderx_gpio *txgpio = txline->txgpio;
-+	struct irq_data *parent_data = data->parent_data;
- 	int r;
- 
- 	r = gpiochip_lock_as_irq(&txgpio->chip, txline->line);
- 	if (r)
- 		return r;
- 
--	r = irq_chip_request_resources_parent(data);
--	if (r)
--		gpiochip_unlock_as_irq(&txgpio->chip, txline->line);
-+	if (parent_data && parent_data->chip->irq_request_resources) {
-+		r = irq_chip_request_resources_parent(data);
-+		if (r)
-+			gpiochip_unlock_as_irq(&txgpio->chip, txline->line);
-+	}
- 
- 	return r;
- }
diff --git a/target/linux/octeontx/patches-5.4/0003-can-mcp251x-convert-to-half-duplex-SPI.patch b/target/linux/octeontx/patches-5.4/0003-can-mcp251x-convert-to-half-duplex-SPI.patch
deleted file mode 100644
index f760b2ac9a..0000000000
--- a/target/linux/octeontx/patches-5.4/0003-can-mcp251x-convert-to-half-duplex-SPI.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 097cc81ee5c15913ad330baffff2e3dea09bdad0 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Thu, 30 Aug 2018 15:16:08 -0700
-Subject: [PATCH] can: mcp251x: convert driver to half-duplex SPI
-
-Some SPI host controllers such as the Cavium Thunder TX do not support
-full-duplex SPI. Using half-duplex transfers allows the driver to work
-with those host controllers.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/net/can/spi/mcp251x.c | 15 ++++++++-------
- 1 file changed, 8 insertions(+), 7 deletions(-)
-
---- a/drivers/net/can/spi/mcp251x.c
-+++ b/drivers/net/can/spi/mcp251x.c
-@@ -291,23 +291,23 @@ static u8 mcp251x_read_reg(struct spi_de
- 	priv->spi_tx_buf[0] = INSTRUCTION_READ;
- 	priv->spi_tx_buf[1] = reg;
- 
--	mcp251x_spi_trans(spi, 3);
--	val = priv->spi_rx_buf[2];
-+	spi_write_then_read(spi, priv->spi_tx_buf, 2, &val, 1);
- 
- 	return val;
- }
- 
- static void mcp251x_read_2regs(struct spi_device *spi, u8 reg, u8 *v1, u8 *v2)
- {
-+	u8 val[4] = {0};
- 	struct mcp251x_priv *priv = spi_get_drvdata(spi);
- 
- 	priv->spi_tx_buf[0] = INSTRUCTION_READ;
- 	priv->spi_tx_buf[1] = reg;
- 
--	mcp251x_spi_trans(spi, 4);
-+	spi_write_then_read(spi, priv->spi_tx_buf, 2, val, 2);
- 
--	*v1 = priv->spi_rx_buf[2];
--	*v2 = priv->spi_rx_buf[3];
-+	*v1 = val[0];
-+	*v2 = val[1];
- }
- 
- static void mcp251x_write_reg(struct spi_device *spi, u8 reg, u8 val)
-@@ -398,8 +398,9 @@ static void mcp251x_hw_rx_frame(struct s
- 			buf[i] = mcp251x_read_reg(spi, RXBCTRL(buf_idx) + i);
- 	} else {
- 		priv->spi_tx_buf[RXBCTRL_OFF] = INSTRUCTION_READ_RXB(buf_idx);
--		mcp251x_spi_trans(spi, SPI_TRANSFER_BUF_LEN);
--		memcpy(buf, priv->spi_rx_buf, SPI_TRANSFER_BUF_LEN);
-+		spi_write_then_read(spi, priv->spi_tx_buf, 1, priv->spi_rx_buf,
-+				    SPI_TRANSFER_BUF_LEN);
-+		memcpy(buf + 1, priv->spi_rx_buf, SPI_TRANSFER_BUF_LEN - 1);
- 	}
- }
- 
diff --git a/target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch b/target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch
deleted file mode 100644
index 8b7285abdf..0000000000
--- a/target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From d0ff7a1bcfe886cab1a237895b08ac51ecfe10e7 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Wed, 10 Apr 2019 08:00:47 -0700
-Subject: [PATCH 04/12] PCI: add quirk for Gateworks PLX PEX860x switch with
- GPIO PERST#
-
-Gateworks boards use PLX PEX860x switches where downstream ports
-have their PERST# driven from the PEX GPIO.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/pci/quirks.c | 32 ++++++++++++++++++++++++++++++++
- 1 file changed, 32 insertions(+)
-
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -25,6 +25,7 @@
- #include <linux/ktime.h>
- #include <linux/mm.h>
- #include <linux/nvme.h>
-+#include <linux/of.h>
- #include <linux/platform_data/x86/apple.h>
- #include <linux/pm_runtime.h>
- #include <linux/suspend.h>
-@@ -5793,3 +5794,34 @@ static void nvidia_ion_ahci_fixup(struct
- 	pdev->dev_flags |= PCI_DEV_FLAGS_HAS_MSI_MASKING;
- }
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0ab8, nvidia_ion_ahci_fixup);
-+
-+#ifdef CONFIG_PCI_HOST_THUNDER_PEM
-+/*
-+ * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
-+ * as they are used for slots1-7 PERST#
-+ */
-+static void newport_pciesw_early_fixup(struct pci_dev *dev)
-+{
-+	u32 dw;
-+
-+	if (!of_machine_is_compatible("gw,newport"))
-+		return;
-+
-+	if (dev->devfn != 0)
-+		return;
-+
-+	dev_info(&dev->dev, "de-asserting PERST#\n");
-+	pci_read_config_dword(dev, 0x62c, &dw);
-+	dw |= 0xaaa8; /* GPIO1-7 outputs */
-+	pci_write_config_dword(dev, 0x62c, dw);
-+
-+	pci_read_config_dword(dev, 0x644, &dw);
-+	dw |= 0xfe;   /* GPIO1-7 output high */
-+	pci_write_config_dword(dev, 0x644, dw);
-+
-+	msleep(100);
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, newport_pciesw_early_fixup);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, newport_pciesw_early_fixup);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, newport_pciesw_early_fixup);
-+#endif /* CONFIG_PCI_HOST_THUNDER_PEM */
diff --git a/target/linux/omap/config-5.4 b/target/linux/omap/config-5.4
deleted file mode 100644
index 7c194579d2..0000000000
--- a/target/linux/omap/config-5.4
+++ /dev/null
@@ -1,740 +0,0 @@
-# CONFIG_AHCI_DM816 is not set
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_AM335X_CONTROL_USB=y
-CONFIG_AM335X_PHY_USB=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_BANDGAP=y
-CONFIG_ARCH_HAS_BINFMT_FLAT=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_KEEPINITRD=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_ARCH_OMAP4=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_OMAP2PLUS_CPUFREQ=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_TI_CPUFREQ=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASSOCIATIVE_ARRAY=y
-CONFIG_AT803X_PHY=y
-CONFIG_ATA=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_GENERIC=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_TPS65217 is not set
-CONFIG_BCH=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CC_HAS_KASAN_GENERIC=y
-CONFIG_CEC_CORE=y
-# CONFIG_CHARGER_TPS65217 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_TI_32K=y
-CONFIG_CLK_TWL6040=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_PALMAS is not set
-# CONFIG_COMMON_CLK_TI_ADPLL is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONNECTOR=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRAMFS=y
-CONFIG_CRC16=y
-CONFIG_CRC7=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_OMAP=y
-CONFIG_CRYPTO_DEV_OMAP_AES=y
-CONFIG_CRYPTO_DEV_OMAP_DES=y
-CONFIG_CRYPTO_DEV_OMAP_SHAM=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ENGINE=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DDR=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DM9000=y
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OMAP=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNS_RESOLVER=y
-CONFIG_DRM=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_OMAP=y
-CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=y
-CONFIG_DRM_OMAP_CONNECTOR_HDMI=y
-# CONFIG_DRM_OMAP_ENCODER_OPA362 is not set
-CONFIG_DRM_OMAP_ENCODER_TPD12S015=y
-CONFIG_DRM_OMAP_PANEL_DSI_CM=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_LG_LB035Q02=y
-CONFIG_DRM_PANEL_NEC_NL8048HL11=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_PANEL_SHARP_LS037V7DW01=y
-CONFIG_DRM_PANEL_SONY_ACX565AKM=y
-CONFIG_DRM_PANEL_TPO_TD028TTEC1=y
-CONFIG_DRM_PANEL_TPO_TD043MTEA1=y
-CONFIG_DRM_TI_TFP410=y
-CONFIG_DTC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_93CX6=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_EXTCON_PALMAS=y
-CONFIG_EXTCON_USB_GPIO=y
-CONFIG_F2FS_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_FAT_FS=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_OMAP=y
-CONFIG_GPIO_PALMAS=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_PCF857X=y
-# CONFIG_GPIO_TPS65218 is not set
-CONFIG_GPIO_TPS65910=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_GPIO_TWL6040=y
-CONFIG_GRACE_PERIOD=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PCI=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HDMI=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HSI=y
-CONFIG_HSI_BOARDINFO=y
-# CONFIG_HSI_CHAR is not set
-CONFIG_HWMON=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KEYS=y
-CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_KS8851=y
-CONFIG_KS8851_MLL=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LIBCRC32C=y
-CONFIG_LIBFDT=y
-CONFIG_LOCKD=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_PALMAS=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MFD_TI_AM335X_TSCADC=y
-CONFIG_MFD_TPS65217=y
-CONFIG_MFD_TPS65218=y
-CONFIG_MFD_TPS65910=y
-CONFIG_MFD_TWL4030_AUDIO=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_OMAP is not set
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MSDOS_FS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_BCH=y
-CONFIG_MTD_NAND_OMAP_BCH_BUILD=y
-CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
-CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_OOPS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_USE_KERNEL_DNS=y
-# CONFIG_NFS_USE_LEGACY_DNS is not set
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OID_REGISTRY=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_DSS_DPI=y
-CONFIG_OMAP2_DSS_DSI=y
-CONFIG_OMAP2_DSS_HDMI_COMMON=y
-CONFIG_OMAP2_DSS_INIT=y
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-CONFIG_OMAP3_THERMAL=y
-CONFIG_OMAP4_DSS_HDMI=y
-CONFIG_OMAP4_DSS_HDMI_CEC=y
-CONFIG_OMAP4_THERMAL=y
-CONFIG_OMAP5_DSS_HDMI=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_CONTROL_PHY=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_DSS_BASE=y
-CONFIG_OMAP_GPMC=y
-# CONFIG_OMAP_GPMC_DEBUG is not set
-CONFIG_OMAP_INTERCONNECT=y
-CONFIG_OMAP_INTERCONNECT_BARRIER=y
-CONFIG_OMAP_IRQCHIP=y
-CONFIG_OMAP_OCP2SCP=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_SSI is not set
-CONFIG_OMAP_USB2=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_OPROFILE=y
-CONFIG_OPTPROBES=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_DM816X_USB is not set
-CONFIG_PHY_TI_GMII_SEL=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_PALMAS is not set
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_PL310_ERRATA_727915=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_OPP=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_POWER_AVS=y
-CONFIG_POWER_AVS_OMAP=y
-CONFIG_POWER_AVS_OMAP_CLASS3=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_PROC_EVENTS=y
-CONFIG_PROFILING=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-# CONFIG_PWM_OMAP_DMTIMER is not set
-CONFIG_PWM_SYSFS=y
-CONFIG_PWM_TIECAP=y
-CONFIG_PWM_TIEHRPWM=y
-CONFIG_PWM_TIPWMSS=y
-# CONFIG_PWM_TWL is not set
-# CONFIG_PWM_TWL_LED is not set
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=y
-CONFIG_QUOTA=y
-CONFIG_QUOTACTL=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_QUOTA_TREE=y
-CONFIG_RATIONAL=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_PALMAS=y
-CONFIG_REGULATOR_PBIAS=y
-CONFIG_REGULATOR_TI_ABB=y
-CONFIG_REGULATOR_TPS62360=y
-CONFIG_REGULATOR_TPS65023=y
-CONFIG_REGULATOR_TPS6507X=y
-CONFIG_REGULATOR_TPS65217=y
-CONFIG_REGULATOR_TPS65218=y
-CONFIG_REGULATOR_TPS65910=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_ROOT_NFS=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_RTC_DRV_PALMAS=y
-# CONFIG_RTC_DRV_TPS65910 is not set
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SCHEDSTATS=y
-CONFIG_SCHED_INFO=y
-CONFIG_SCHED_MC=y
-CONFIG_SCSI=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SDIO_UART=y
-CONFIG_SECCOMP=y
-CONFIG_SECCOMP_FILTER=y
-# CONFIG_SENSORS_DRIVETEMP is not set
-CONFIG_SENSORS_GPIO_FAN=y
-CONFIG_SENSORS_LM75=y
-CONFIG_SENSORS_TMP102=y
-CONFIG_SENSORS_TSL2550=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-# CONFIG_SERIAL_8250_OMAP is not set
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_OMAP=y
-CONFIG_SERIAL_OMAP_CONSOLE=y
-CONFIG_SERIO=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SG_SPLIT=y
-CONFIG_SKB_EXTENSIONS=y
-CONFIG_SMC91X=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SMSC911X=y
-CONFIG_SMSC_PHY=y
-CONFIG_SND=y
-# CONFIG_SND_COMPRESS_OFFLOAD is not set
-CONFIG_SND_DMAENGINE_PCM=y
-CONFIG_SND_JACK=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_SIMPLE_CARD_UTILS=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_DAVINCI_MCASP=y
-CONFIG_SND_SOC_DMIC=y
-CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_NOKIA_RX51 is not set
-# CONFIG_SND_SOC_OMAP3_PANDORA is not set
-CONFIG_SND_SOC_OMAP3_TWL4030=y
-CONFIG_SND_SOC_OMAP_ABE_TWL6040=y
-CONFIG_SND_SOC_OMAP_DMIC=y
-CONFIG_SND_SOC_OMAP_HDMI=y
-CONFIG_SND_SOC_OMAP_MCBSP=y
-CONFIG_SND_SOC_OMAP_MCPDM=y
-CONFIG_SND_SOC_TI_EDMA_PCM=y
-CONFIG_SND_SOC_TI_SDMA_PCM=y
-CONFIG_SND_SOC_TLV320AIC3X=y
-CONFIG_SND_SOC_TWL4030=y
-CONFIG_SND_SOC_TWL6040=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SOC_AM33XX=y
-CONFIG_SOC_AM43XX=y
-CONFIG_SOC_BUS=y
-CONFIG_SOC_HAS_OMAP2_SDRC=y
-CONFIG_SOC_OMAP3430=y
-# CONFIG_SOC_TI81XX is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_SPI_TI_QSPI=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_STACKTRACE=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_FAIR_SHARE=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_GOV_USER_SPACE=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TI_CPPI41=y
-CONFIG_TI_CPSW=y
-CONFIG_TI_CPSW_PHY_SEL=y
-CONFIG_TI_CPTS=y
-CONFIG_TI_CPTS_MOD=y
-CONFIG_TI_DAVINCI_EMAC=y
-CONFIG_TI_DAVINCI_MDIO=y
-CONFIG_TI_DMA_CROSSBAR=y
-CONFIG_TI_EDMA=y
-CONFIG_TI_EMIF=y
-# CONFIG_TI_EMIF_SRAM is not set
-CONFIG_TI_PIPE3=y
-CONFIG_TI_SOC_THERMAL=y
-CONFIG_TI_SYSC=y
-CONFIG_TI_THERMAL=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TRACE_CLOCK=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_USB=y
-CONFIG_TWL4030_WATCHDOG=y
-# CONFIG_TWL6030_USB is not set
-CONFIG_TWL6040_CORE=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_DUAL_ROLE=y
-# CONFIG_USB_DWC3_GADGET is not set
-# CONFIG_USB_DWC3_HOST is not set
-CONFIG_USB_DWC3_OMAP=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_OMAP=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_INVENTRA_DMA=y
-CONFIG_USB_MUSB_AM335X_CHILD=y
-CONFIG_USB_MUSB_AM35X=y
-CONFIG_USB_MUSB_DSPS=y
-CONFIG_USB_MUSB_DUAL_ROLE=y
-# CONFIG_USB_MUSB_GADGET is not set
-CONFIG_USB_MUSB_HDRC=y
-# CONFIG_USB_MUSB_HOST is not set
-CONFIG_USB_MUSB_OMAP2PLUS=y
-CONFIG_USB_MUSB_TUSB6010=y
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_TI_CPPI41_DMA=y
-CONFIG_USB_TUSB_OMAP_DMA=y
-CONFIG_USE_OF=y
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VIDEOMODE_HELPERS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XFRM_ALGO=y
-CONFIG_XFRM_MIGRATE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/sunxi/config-5.4 b/target/linux/sunxi/config-5.4
deleted file mode 100644
index e01a2cbd5e..0000000000
--- a/target/linux/sunxi/config-5.4
+++ /dev/null
@@ -1,581 +0,0 @@
-# CONFIG_AHCI_SUNXI is not set
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_KEEPINITRD=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=416
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_SUNXI_MC_SMP=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-# CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM is not set
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_CCI=y
-CONFIG_ARM_CCI400_COMMON=y
-CONFIG_ARM_CCI400_PORT_CTRL=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_643719=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_LPAE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_PMU=y
-CONFIG_ARM_PSCI=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_AXP20X_POWER=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CAN=y
-CONFIG_CC_HAS_KASAN_GENERIC=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLK_SUNXI=y
-CONFIG_CLK_SUNXI_CLOCKS=y
-CONFIG_CLK_SUNXI_PRCM_SUN6I=y
-CONFIG_CLK_SUNXI_PRCM_SUN8I=y
-CONFIG_CLK_SUNXI_PRCM_SUN9I=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONNECTOR=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_SUN4I_SS=y
-CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SUN4I=y
-CONFIG_DMA_SUN6I=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_DWMAC_GENERIC=y
-# CONFIG_DWMAC_SUN8I is not set
-CONFIG_DWMAC_SUNXI=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ELF_CORE=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_LITTLE_ENDIAN=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_SIMPLE=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FRAME_WARN=2048
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FAST_GUP=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
-CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
-CONFIG_HAVE_KVM_EVENTFD=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_HAVE_KVM_IRQFD=y
-CONFIG_HAVE_KVM_IRQ_BYPASS=y
-CONFIG_HAVE_KVM_IRQ_ROUTING=y
-CONFIG_HAVE_KVM_MSI=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PCI=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_SUN6I_P2WI=y
-CONFIG_IIO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_AXP20X_PEK=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_BYPASS_MANAGER=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KEYBOARD_SUN4I_LRADC=y
-CONFIG_KSM=y
-CONFIG_KVM=y
-CONFIG_KVM_ARM_HOST=y
-CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
-CONFIG_KVM_MMIO=y
-CONFIG_KVM_VFIO=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_MACH_SUN4I=y
-CONFIG_MACH_SUN5I=y
-CONFIG_MACH_SUN6I=y
-CONFIG_MACH_SUN7I=y
-CONFIG_MACH_SUN8I=y
-CONFIG_MACH_SUN9I=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_SUN4I=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_AXP20X=y
-CONFIG_MFD_AXP20X_I2C=y
-CONFIG_MFD_AXP20X_RSB=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SUN6I_PRCM=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SUNXI=y
-CONFIG_MMU_NOTIFIER=y
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIT_FW=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_VENDOR_ALLWINNER=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=8
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SUNXI_SID=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_SUN4I_USB=y
-# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
-CONFIG_PHY_SUN9I_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_AXP209=y
-CONFIG_PINCTRL_SUN4I_A10=y
-CONFIG_PINCTRL_SUN5I=y
-CONFIG_PINCTRL_SUN6I_A31=y
-CONFIG_PINCTRL_SUN6I_A31_R=y
-CONFIG_PINCTRL_SUN8I_A23=y
-CONFIG_PINCTRL_SUN8I_A23_R=y
-CONFIG_PINCTRL_SUN8I_A33=y
-CONFIG_PINCTRL_SUN8I_A83T=y
-CONFIG_PINCTRL_SUN8I_A83T_R=y
-CONFIG_PINCTRL_SUN8I_H3=y
-CONFIG_PINCTRL_SUN8I_H3_R=y
-CONFIG_PINCTRL_SUN8I_V3S=y
-CONFIG_PINCTRL_SUN9I_A80=y
-CONFIG_PINCTRL_SUN9I_A80_R=y
-CONFIG_PINCTRL_SUNXI=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_COUNT=y
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PROC_EVENTS=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-CONFIG_PWM_SUN4I=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_AXP20X=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_SY8106A=y
-CONFIG_RELAY=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_SIMPLE=y
-CONFIG_RESET_SUNXI=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-CONFIG_SDIO_UART=y
-CONFIG_SECURITYFS=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SND=y
-CONFIG_SND_COMPRESS_OFFLOAD=y
-CONFIG_SND_JACK=y
-CONFIG_SND_JACK_INPUT_DEV=y
-CONFIG_SND_PCM=y
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_SIMPLE_CARD_UTILS=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SUN4I_I2S is not set
-# CONFIG_SND_SUN4I_SPDIF is not set
-# CONFIG_SND_SUN8I_CODEC is not set
-# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_SUN4I=y
-CONFIG_SPI_SUN6I=y
-CONFIG_SRCU=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-# CONFIG_STMMAC_SELFTESTS is not set
-CONFIG_SUN4I_A10_CCU=y
-# CONFIG_SUN4I_EMAC is not set
-CONFIG_SUN4I_TIMER=y
-CONFIG_SUN5I_CCU=y
-CONFIG_SUN5I_HSTIMER=y
-CONFIG_SUN6I_A31_CCU=y
-CONFIG_SUN8I_A23_CCU=y
-CONFIG_SUN8I_A33_CCU=y
-CONFIG_SUN8I_A83T_CCU=y
-CONFIG_SUN8I_DE2_CCU=y
-CONFIG_SUN8I_H3_CCU=y
-CONFIG_SUN8I_R40_CCU=y
-CONFIG_SUN8I_R_CCU=y
-CONFIG_SUN8I_V3S_CCU=y
-CONFIG_SUN9I_A80_CCU=y
-CONFIG_SUNXI_CCU=y
-CONFIG_SUNXI_RSB=y
-CONFIG_SUNXI_SRAM=y
-CONFIG_SUNXI_WATCHDOG=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_TASKS_RCU=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TOUCHSCREEN_PROPERTIES=y
-CONFIG_TOUCHSCREEN_SUN4I=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USERIO=y
-CONFIG_USE_OF=y
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VHOST=y
-CONFIG_VHOST_NET=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
diff --git a/target/linux/sunxi/cortexa53/config-5.4 b/target/linux/sunxi/cortexa53/config-5.4
deleted file mode 100644
index aa19a41622..0000000000
--- a/target/linux/sunxi/cortexa53/config-5.4
+++ /dev/null
@@ -1,158 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
-CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
-CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
-CONFIG_ARCH_HAS_PTE_DEVMAP=y
-CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
-CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_INLINE_READ_LOCK=y
-CONFIG_ARCH_INLINE_READ_LOCK_BH=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_READ_UNLOCK=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_SPIN_LOCK=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_WRITE_LOCK=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_INT128=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_USE_MEMREMAP_PROT=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CONT_SHIFT=4
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DRM_RCAR_WRITEBACK=y
-CONFIG_DWMAC_SUN8I=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EFI_EARLYCON=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y
-CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
-CONFIG_HAVE_ARCH_STACKLEAK=y
-CONFIG_HAVE_ARCH_VMAP_STACK=y
-CONFIG_HAVE_ASM_MODVERSIONS=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_DEBUG_BUGVERBOSE=y
-CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
-CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
-CONFIG_HAVE_GENERIC_VDSO=y
-CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_PATA_PLATFORM=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INLINE_READ_LOCK=y
-CONFIG_INLINE_READ_LOCK_BH=y
-CONFIG_INLINE_READ_LOCK_IRQ=y
-CONFIG_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_INLINE_READ_UNLOCK_BH=y
-CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_SPIN_LOCK=y
-CONFIG_INLINE_SPIN_LOCK_BH=y
-CONFIG_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_INLINE_SPIN_TRYLOCK=y
-CONFIG_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_WRITE_LOCK=y
-CONFIG_INLINE_WRITE_LOCK_BH=y
-CONFIG_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_KVM_ARM_PMU=y
-CONFIG_KVM_INDIRECT_VECTORS=y
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MICREL_PHY=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NO_IOPORT_MAP=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_PINCTRL_SUN50I_A64=y
-CONFIG_PINCTRL_SUN50I_A64_R=y
-CONFIG_PINCTRL_SUN50I_H5=y
-CONFIG_PINCTRL_SUN50I_H6=y
-CONFIG_PINCTRL_SUN50I_H6_R=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-# CONFIG_SND_SUN50I_CODEC_ANALOG is not set
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SUN50I_A64_CCU=y
-CONFIG_SUN50I_DE2_BUS=y
-CONFIG_SUN50I_ERRATUM_UNKNOWN1=y
-CONFIG_SUN50I_H6_CCU=y
-CONFIG_SUN50I_H6_R_CCU=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB_MUSB_DUAL_ROLE=y
-# CONFIG_USB_MUSB_GADGET is not set
-CONFIG_USB_MUSB_HDRC=y
-# CONFIG_USB_MUSB_HOST is not set
-CONFIG_USB_MUSB_SUNXI=y
-CONFIG_VMAP_STACK=y
-CONFIG_ZONE_DMA32=y
diff --git a/target/linux/sunxi/cortexa7/config-5.4 b/target/linux/sunxi/cortexa7/config-5.4
deleted file mode 100644
index 9f76cacabe..0000000000
--- a/target/linux/sunxi/cortexa7/config-5.4
+++ /dev/null
@@ -1,31 +0,0 @@
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HAS_BINFMT_FLAT=y
-CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_DWMAC_SUN8I=y
-# CONFIG_MACH_SUN4I is not set
-# CONFIG_MACH_SUN5I is not set
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_NOP_USB_XCEIV=y
-# CONFIG_PINCTRL_SUN50I_A64 is not set
-# CONFIG_PINCTRL_SUN50I_A64_R is not set
-# CONFIG_PINCTRL_SUN50I_H5 is not set
-# CONFIG_PINCTRL_SUN50I_H6 is not set
-# CONFIG_PINCTRL_SUN50I_H6_R is not set
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB_MUSB_DUAL_ROLE=y
-# CONFIG_USB_MUSB_GADGET is not set
-CONFIG_USB_MUSB_HDRC=y
-# CONFIG_USB_MUSB_HOST is not set
-CONFIG_USB_MUSB_SUNXI=y
-CONFIG_USB_PHY=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_TAG_BRCM=y
-CONFIG_NET_DSA_TAG_BRCM_COMMON=y
-CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_B53=y
-CONFIG_B53_MDIO_DRIVER=y
diff --git a/target/linux/sunxi/cortexa8/config-5.4 b/target/linux/sunxi/cortexa8/config-5.4
deleted file mode 100644
index b3ddf4b1e3..0000000000
--- a/target/linux/sunxi/cortexa8/config-5.4
+++ /dev/null
@@ -1,20 +0,0 @@
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HAS_BINFMT_FLAT=y
-CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_COMPAT_32BIT_TIME=y
-# CONFIG_MACH_SUN6I is not set
-# CONFIG_MACH_SUN7I is not set
-# CONFIG_MACH_SUN8I is not set
-# CONFIG_MACH_SUN9I is not set
-CONFIG_PGTABLE_LEVELS=2
-# CONFIG_PHY_SUN9I_USB is not set
-# CONFIG_PINCTRL_SUN50I_A64 is not set
-# CONFIG_PINCTRL_SUN50I_A64_R is not set
-# CONFIG_PINCTRL_SUN50I_H5 is not set
-# CONFIG_PINCTRL_SUN50I_H6 is not set
-# CONFIG_PINCTRL_SUN50I_H6_R is not set
-# CONFIG_SPI_SUN6I is not set
-# CONFIG_SUN8I_A83T_CCU is not set
-CONFIG_UNWINDER_ARM=y
diff --git a/target/linux/sunxi/patches-5.4/062-add-sun8i-h3-zeropi-support.patch b/target/linux/sunxi/patches-5.4/062-add-sun8i-h3-zeropi-support.patch
deleted file mode 100644
index dc69f70bbe..0000000000
--- a/target/linux/sunxi/patches-5.4/062-add-sun8i-h3-zeropi-support.patch
+++ /dev/null
@@ -1,79 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -1118,6 +1118,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
- 	sun8i-h3-orangepi-plus2e.dtb \
- 	sun8i-h3-orangepi-zero-plus2.dtb \
- 	sun8i-h3-rervision-dvk.dtb \
-+	sun8i-h3-zeropi.dtb \
- 	sun8i-r16-bananapi-m2m.dtb \
- 	sun8i-r16-nintendo-nes-classic.dtb \
- 	sun8i-r16-nintendo-super-nes-classic.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h3-zeropi.dts
-@@ -0,0 +1,66 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+
-+#include "sun8i-h3-nanopi.dtsi"
-+
-+/ {
-+	model = "FriendlyElec ZeroPi";
-+	compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3";
-+
-+	aliases {
-+		ethernet0 = &emac;
-+	};
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&gmac_power_pin_nanopi>;
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-+	};
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&pio {
-+	gmac_power_pin_nanopi: gmac_power_pin@0 {
-+		pins = "PD6";
-+		function = "gpio_out";
-+	};
-+};
-+
-+&external_mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii";
-+
-+	allwinner,leds-active-low;
-+	status = "okay";
-+};
-+
-+&usb_otg {
-+	status = "okay";
-+	dr_mode = "peripheral";
-+};
-+
-+&usbphy {
-+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-+};
diff --git a/target/linux/sunxi/patches-5.4/100-sunxi-h3-add-support-for-nanopi-r1.patch b/target/linux/sunxi/patches-5.4/100-sunxi-h3-add-support-for-nanopi-r1.patch
deleted file mode 100644
index 834ea153c8..0000000000
--- a/target/linux/sunxi/patches-5.4/100-sunxi-h3-add-support-for-nanopi-r1.patch
+++ /dev/null
@@ -1,186 +0,0 @@
-From 5aee0b1272cd5b42933ef629d66b677669e2e8d2 Mon Sep 17 00:00:00 2001
-From: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
-Date: Mon, 12 Oct 2020 05:24:51 +0000
-Subject: [PATCH] sunxi: add support for friendlyarm nanopi r1
-
-Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
----
- .../devicetree/bindings/arm/sunxi.yaml        |   5 +
- arch/arm/boot/dts/Makefile                    |   1 +
- arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts      | 146 ++++++++++++++++++
- 3 files changed, 152 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
-
---- a/Documentation/devicetree/bindings/arm/sunxi.yaml
-+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
-@@ -241,6 +241,11 @@ properties:
-           - const: friendlyarm,nanopi-neo-plus2
-           - const: allwinner,sun50i-h5
- 
-+      - description: FriendlyARM NanoPi R1
-+        items:
-+          - const: friendlyarm,nanopi-r1
-+          - const: allwinner,sun8i-h3
-+
-       - description: Gemei G9 Tablet
-         items:
-           - const: gemei,g9
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -1109,6 +1109,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
- 	sun8i-h3-nanopi-m1-plus.dtb \
- 	sun8i-h3-nanopi-neo.dtb \
- 	sun8i-h3-nanopi-neo-air.dtb \
-+	sun8i-h3-nanopi-r1.dtb \
- 	sun8i-h3-orangepi-2.dtb \
- 	sun8i-h3-orangepi-lite.dtb \
- 	sun8i-h3-orangepi-one.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
-@@ -0,0 +1,146 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
-+ * Copyright (C) 2020 Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
-+ */
-+
-+/* NanoPi R1 is based on the NanoPi-H3 design from FriendlyARM */
-+#include "sun8i-h3-nanopi.dtsi"
-+
-+/ {
-+	model = "FriendlyARM NanoPi R1";
-+	compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-+	};
-+
-+	vdd_cpux: gpio-regulator {
-+		compatible = "regulator-gpio";
-+		pinctrl-names = "default";
-+		regulator-name = "vdd-cpux";
-+		regulator-type = "voltage";
-+		regulator-boot-on;
-+		regulator-always-on;
-+		regulator-min-microvolt = <1100000>;
-+		regulator-max-microvolt = <1300000>;
-+		regulator-ramp-delay = <50>;
-+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
-+		gpios-states = <0x1>;
-+		states = <1100000 0x0
-+			  1300000 0x1>;
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		pinctrl-names = "default";
-+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
-+	};
-+
-+	leds {
-+		/delete-node/ pwr;
-+		status {
-+			label = "nanopi:red:status";
-+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "heartbeat";
-+		};
-+
-+		wan {
-+			label = "nanopi:green:wan";
-+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		lan {
-+			label = "nanopi:green:lan";
-+			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	r_gpio_keys {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&sw_r_npi>;
-+
-+		/delete-node/ k1;
-+		reset {
-+			label = "reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&vdd_cpux>;
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&ehci2 {
-+	status = "okay";
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii";
-+	status = "okay";
-+};
-+
-+&external_mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-+
-+&mmc1 {
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	sdio_wifi: sdio_wifi@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+		interrupt-parent = <&pio>;
-+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>;
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
-+&mmc2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc2_8bit_pins>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <8>;
-+	non-removable;
-+	status = "okay";
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+&ohci2 {
-+	status = "okay";
-+};
-+
-+&r_pio {
-+	sw_r_npi: key_pins {
-+		pins = "PL3";
-+		function = "gpio_in";
-+	};
-+};
diff --git a/target/linux/sunxi/patches-5.4/101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch b/target/linux/sunxi/patches-5.4/101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch
deleted file mode 100644
index 339eadcd23..0000000000
--- a/target/linux/sunxi/patches-5.4/101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch
+++ /dev/null
@@ -1,229 +0,0 @@
-From 9962cb9be2db877c232aaf00db40125c0d7bf4bc Mon Sep 17 00:00:00 2001
-From: Chukun Pan <amadeus@jmu.edu.cn>
-Date: Mon, 17 May 2021 00:35:22 +0800
-Subject: [PATCH] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
-
-The NanoPi R1S H5 is a open source board made by FriendlyElec.
-It has the following features:
-
-- Allwinner H5, Quad-core Cortex-A53
-- 512MB DDR3 RAM
-- 10/100/1000M Ethernet x 2
-- RTL8189ETV WiFi 802.11b/g/n
-- USB 2.0 host port (A)
-- MicroSD Slot
-- Serial Debug Port
-- 5V 2A DC power-supply
-
-Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
-Signed-off-by: Maxime Ripard <maxime@cerno.tech>
-Link: https://lore.kernel.org/r/20210516163523.9484-2-amadeus@jmu.edu.cn
----
- arch/arm64/boot/dts/allwinner/Makefile        |   1 +
- .../dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 195 ++++++++++++++++++
- 2 files changed, 196 insertions(+)
- create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
-
---- a/arch/arm64/boot/dts/allwinner/Makefile
-+++ b/arch/arm64/boot/dts/allwinner/Makefile
-@@ -17,6 +17,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-em
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
-+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
-@@ -0,0 +1,190 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2021 Chukun Pan <amadeus@jmu.edu.cn>
-+ *
-+ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is:
-+ *   Copyright (C) 2017 Antony Antony <antony@phenome.org>
-+ *   Copyright (C) 2016 ARM Ltd.
-+ */
-+
-+/dts-v1/;
-+#include "sun50i-h5.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+	model = "FriendlyARM NanoPi R1S H5";
-+	compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5";
-+
-+	aliases {
-+		ethernet0 = &emac;
-+		ethernet1 = &rtl8189etv;
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		sys {
-+			label = "nanopi:red:sys";
-+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "heartbeat";
-+		};
-+
-+		lan {
-+			label = "nanopi:green:lan";
-+			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		wan {
-+			label = "nanopi:green:wan";
-+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	r-gpio-keys {
-+		compatible = "gpio-keys";
-+
-+		reset {
-+			label = "reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-+	};
-+
-+	reg_vcc3v3: vcc3v3 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+	};
-+
-+	reg_usb0_vbus: usb0-vbus {
-+		compatible = "regulator-fixed";
-+		regulator-name = "usb0-vbus";
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		enable-active-high;
-+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
-+		status = "okay";
-+	};
-+
-+	vdd_cpux: gpio-regulator {
-+		compatible = "regulator-gpio";
-+		regulator-name = "vdd-cpux";
-+		regulator-type = "voltage";
-+		regulator-boot-on;
-+		regulator-always-on;
-+		regulator-min-microvolt = <1100000>;
-+		regulator-max-microvolt = <1300000>;
-+		regulator-ramp-delay = <50>; /* 4ms */
-+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
-+		gpios-states = <0x1>;
-+		states = <1100000 0x0>, <1300000 0x1>;
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-+		post-power-on-delay-ms = <200>;
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&vdd_cpux>;
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&ehci2 {
-+	status = "okay";
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii";
-+	status = "okay";
-+};
-+
-+&external_mdio {
-+	ext_rgmii_phy: ethernet-phy@7 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-+
-+&i2c0 {
-+	status = "okay";
-+
-+	eeprom@51 {
-+		compatible = "microchip,24c02";
-+		reg = <0x51>;
-+		pagesize = <16>;
-+	};
-+};
-+
-+&mmc0 {
-+	vmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <4>;
-+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-+	status = "okay";
-+};
-+
-+&mmc1 {
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	rtl8189etv: sdio_wifi@1 {
-+		reg = <1>;
-+	};
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+&ohci2 {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pa_pins>;
-+	status = "okay";
-+};
-+
-+&usb_otg {
-+	dr_mode = "peripheral";
-+	status = "okay";
-+};
-+
-+&usbphy {
-+	/* USB Type-A port's VBUS is always on */
-+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-+	usb0_vbus-supply = <&reg_usb0_vbus>;
-+	status = "okay";
-+};
diff --git a/target/linux/sunxi/patches-5.4/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch b/target/linux/sunxi/patches-5.4/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch
deleted file mode 100644
index 1ee240afb5..0000000000
--- a/target/linux/sunxi/patches-5.4/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From a896bc1d79e3c00f0aacfe225499d811775616f3 Mon Sep 17 00:00:00 2001
-From: Chukun Pan <amadeus@jmu.edu.cn>
-Date: Sun, 10 Oct 2021 21:50:17 +0800
-Subject: [PATCH] arm64: allwinner: add OF node for USB eth on NanoPi R1S H5
-
-This adds the OF node for the USB3 ethernet adapter on the FriendlyARM
-NanoPi R1S H5. Add the correct value for the RTL8153 LED configuration
-register to match the blink behavior of the other port on the device.
-
-Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
----
- arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
-@@ -111,6 +111,13 @@
- 
- &ehci1 {
- 	status = "okay";
-+
-+	usb-eth@1 {
-+		compatible = "realtek,rtl8153";
-+		reg = <1>;
-+
-+		realtek,led-data = <0x78>;
-+	};
- };
- 
- &ehci2 {
diff --git a/target/linux/sunxi/patches-5.4/301-orangepi_pc2_usb_otg_to_host_key_power.patch b/target/linux/sunxi/patches-5.4/301-orangepi_pc2_usb_otg_to_host_key_power.patch
deleted file mode 100644
index af243ca3e7..0000000000
--- a/target/linux/sunxi/patches-5.4/301-orangepi_pc2_usb_otg_to_host_key_power.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
-@@ -98,7 +98,7 @@
- 
- 		sw4 {
- 			label = "sw4";
--			linux,code = <BTN_0>;
-+			linux,code = <KEY_POWER>;
- 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
- 		};
- 	};
-@@ -238,7 +238,7 @@
- };
- 
- &usb_otg {
--	dr_mode = "otg";
-+	dr_mode = "host";
- 	status = "okay";
- };
- 
diff --git a/target/linux/sunxi/patches-5.4/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch b/target/linux/sunxi/patches-5.4/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch
deleted file mode 100644
index 1cf94c0b53..0000000000
--- a/target/linux/sunxi/patches-5.4/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 7d87d3dafc4b1ea5659eb71ee6c5fd5308490d1f Mon Sep 17 00:00:00 2001
-From: Oskari Lemmela <oskari@lemmela.net>
-Date: Mon, 31 Dec 2018 07:44:49 +0200
-Subject: [PATCH] arm64: allwinner: a64-sopine: Add Sopine flash partitions.
-
-First 896kB to u-boot. Enough space for SPL, u-boot and ATF.
-Next 128kB to u-boot environment and rest to firmware.
-
-Firmware partition is compatible FIT image dynamic splitting.
-
-Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
----
- .../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 22 +++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
-@@ -81,6 +81,28 @@
- 		compatible = "jedec,spi-nor";
- 		reg = <0>;
- 		spi-max-frequency = <40000000>;
-+
-+		partitions {
-+			compatible = "fixed-partitions";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			partition@0 {
-+				label = "u-boot";
-+				reg = <0x000000 0x0E0000>;
-+			};
-+
-+			partition@e0000 {
-+				label = "u-boot-env";
-+				reg = <0x0E0000 0x020000>;
-+			};
-+
-+			partition@100000 {
-+				compatible = "denx,fit";
-+				label = "firmware";
-+				reg = <0x100000 0xF00000>;
-+			};
-+		};
- 	};
- };
- 
diff --git a/target/linux/sunxi/patches-5.4/410-v5.6-arm64-dts-allwinner-a64-olinuxino-Add-bank-supply-re.patch b/target/linux/sunxi/patches-5.4/410-v5.6-arm64-dts-allwinner-a64-olinuxino-Add-bank-supply-re.patch
deleted file mode 100644
index 67f7a1536e..0000000000
--- a/target/linux/sunxi/patches-5.4/410-v5.6-arm64-dts-allwinner-a64-olinuxino-Add-bank-supply-re.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From f0c3b29f56f0a946df4941edfe2d98e3e766c30f Mon Sep 17 00:00:00 2001
-From: Stefan Mavrodiev <stefan@olimex.com>
-Date: Fri, 29 Nov 2019 13:39:40 +0200
-Subject: [PATCH] arm64: dts: allwinner: a64: olinuxino: Add bank supply
- regulators
-
-Allwinner A64 SoC has separate supplies for PC, PD, PE, PG and PL. This
-patch adds regulators for them to the pinctrl node.
-
-Exception is PL which is used by the RSB bus. To avoid circular
-dependencies, VCC-PL is omitted.
-
-On boards with eMMC, VCC-PC is supplied by ELDO1, instead of DCDC1.
-
-Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
-[Maxime: Changed the r_pio comment a bit]
-Signed-off-by: Maxime Ripard <maxime@cerno.tech>
----
- .../dts/allwinner/sun50i-a64-olinuxino-emmc.dts |  4 ++++
- .../boot/dts/allwinner/sun50i-a64-olinuxino.dts | 17 +++++++++++++++++
- 2 files changed, 21 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
-@@ -21,3 +21,7 @@
- 	cap-mmc-hw-reset;
- 	status = "okay";
- };
-+
-+&pio {
-+	vcc-pc-supply = <&reg_eldo1>;
-+};
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
-@@ -163,6 +163,23 @@
- 	status = "okay";
- };
- 
-+&pio {
-+	vcc-pc-supply = <&reg_dcdc1>;
-+	vcc-pd-supply = <&reg_dcdc1>;
-+	vcc-pe-supply = <&reg_aldo1>;
-+	vcc-pg-supply = <&reg_dldo4>;
-+};
-+
-+&r_pio {
-+	/*
-+	 * FIXME: We can't add that supply for now since it would
-+	 * create a circular dependency between pinctrl, the regulator
-+	 * and the RSB Bus.
-+	 *
-+	 * vcc-pl-supply = <&reg_aldo2>;
-+	 */
-+};
-+
- &r_rsb {
- 	status = "okay";
- 
diff --git a/target/linux/sunxi/patches-5.4/420-v5.7-arm64-dts-allwinner-a64-olinuxino-add-user-red-LED.patch b/target/linux/sunxi/patches-5.4/420-v5.7-arm64-dts-allwinner-a64-olinuxino-add-user-red-LED.patch
deleted file mode 100644
index f369cb4f7c..0000000000
--- a/target/linux/sunxi/patches-5.4/420-v5.7-arm64-dts-allwinner-a64-olinuxino-add-user-red-LED.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
-Date: Wed, 25 Mar 2020 18:11:16 +0100
-Subject: [PATCH] arm64: dts: allwinner: a64: olinuxino: add user red LED
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There is a red LED marked as `GPIO_LED1` on the silkscreen and connected
-to PE17 by default. So lets add this missing bit in the current hardware
-description.
-
-Signed-off-by: Petr Å tetiar <ynezz@true.cz>
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
-@@ -70,6 +70,15 @@
- 		};
- 	};
- 
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		user {
-+			label = "a64-olinuxino:red:user";
-+			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
-+		};
-+	};
-+
- 	reg_usb1_vbus: usb1-vbus {
- 		compatible = "regulator-fixed";
- 		regulator-name = "usb1-vbus";
diff --git a/target/linux/sunxi/patches-5.4/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch b/target/linux/sunxi/patches-5.4/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch
deleted file mode 100644
index fa02f48132..0000000000
--- a/target/linux/sunxi/patches-5.4/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
-Date: Thu, 26 Mar 2020 10:09:19 +0100
-Subject: [PATCH] arm64: dts: allwinner: a64: olinuxino: add status LED aliases
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Petr Å tetiar <ynezz@true.cz>
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
-@@ -53,6 +53,10 @@
- 	aliases {
- 		ethernet0 = &emac;
- 		serial0 = &uart0;
-+		led-boot = &led_user;
-+		led-failsafe = &led_user;
-+		led-running = &led_user;
-+		led-upgrade = &led_user;
- 	};
- 
- 	chosen {
-@@ -73,7 +77,7 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		user {
-+		led_user: user {
- 			label = "a64-olinuxino:red:user";
- 			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
- 		};
diff --git a/target/linux/sunxi/patches-5.4/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch b/target/linux/sunxi/patches-5.4/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch
deleted file mode 100644
index 8281f78e06..0000000000
--- a/target/linux/sunxi/patches-5.4/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 1845163a052efac124f00656eb72f38947630a42 Mon Sep 17 00:00:00 2001
-From: Chukun Pan <amadeus@jmu.edu.cn>
-Date: Sun, 10 Oct 2021 21:50:18 +0800
-Subject: [PATCH] arm64: dts: allwinner: NanoPi R1S H5: add status LED aliases
-
-Use the SYS LED on the casing for showing system status.
-
-Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
----
- arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
-@@ -21,6 +21,11 @@
- 		ethernet0 = &emac;
- 		ethernet1 = &rtl8189etv;
- 		serial0 = &uart0;
-+
-+		led-boot = &led_sys;
-+		led-failsafe = &led_sys;
-+		led-running = &led_sys;
-+		led-upgrade = &led_sys;
- 	};
- 
- 	chosen {
-@@ -30,7 +35,7 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		sys {
-+		led_sys: sys {
- 			label = "nanopi:red:sys";
- 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "heartbeat";
diff --git a/target/linux/sunxi/patches-5.4/440-add-h6-pwm.patch b/target/linux/sunxi/patches-5.4/440-add-h6-pwm.patch
deleted file mode 100644
index eb254ee74d..0000000000
--- a/target/linux/sunxi/patches-5.4/440-add-h6-pwm.patch
+++ /dev/null
@@ -1,305 +0,0 @@
---- a/drivers/pwm/pwm-sun4i.c
-+++ b/drivers/pwm/pwm-sun4i.c
-@@ -3,6 +3,10 @@
-  * Driver for Allwinner sun4i Pulse Width Modulation Controller
-  *
-  * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
-+ *
-+ * Limitations:
-+ * - When outputing the source clock directly, the PWM logic will be bypassed
-+ *   and the currently running period is not guaranteed to be completed
-  */
- 
- #include <linux/bitops.h>
-@@ -16,6 +20,7 @@
- #include <linux/of_device.h>
- #include <linux/platform_device.h>
- #include <linux/pwm.h>
-+#include <linux/reset.h>
- #include <linux/slab.h>
- #include <linux/spinlock.h>
- #include <linux/time.h>
-@@ -72,12 +77,15 @@ static const u32 prescaler_table[] = {
- 
- struct sun4i_pwm_data {
- 	bool has_prescaler_bypass;
-+	bool has_direct_mod_clk_output;
- 	unsigned int npwm;
- };
- 
- struct sun4i_pwm_chip {
- 	struct pwm_chip chip;
-+	struct clk *bus_clk;
- 	struct clk *clk;
-+	struct reset_control *rst;
- 	void __iomem *base;
- 	spinlock_t ctrl_lock;
- 	const struct sun4i_pwm_data *data;
-@@ -115,6 +123,20 @@ static void sun4i_pwm_get_state(struct p
- 
- 	val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
- 
-+	/*
-+	 * PWM chapter in H6 manual has a diagram which explains that if bypass
-+	 * bit is set, no other setting has any meaning. Even more, experiment
-+	 * proved that also enable bit is ignored in this case.
-+	 */
-+	if ((val & BIT_CH(PWM_BYPASS, pwm->hwpwm)) &&
-+	    sun4i_pwm->data->has_direct_mod_clk_output) {
-+		state->period = DIV_ROUND_UP_ULL(NSEC_PER_SEC, clk_rate);
-+		state->duty_cycle = DIV_ROUND_UP_ULL(state->period, 2);
-+		state->polarity = PWM_POLARITY_NORMAL;
-+		state->enabled = true;
-+		return;
-+	}
-+
- 	if ((PWM_REG_PRESCAL(val, pwm->hwpwm) == PWM_PRESCAL_MASK) &&
- 	    sun4i_pwm->data->has_prescaler_bypass)
- 		prescaler = 1;
-@@ -146,13 +168,24 @@ static void sun4i_pwm_get_state(struct p
- 
- static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm,
- 			       const struct pwm_state *state,
--			       u32 *dty, u32 *prd, unsigned int *prsclr)
-+			       u32 *dty, u32 *prd, unsigned int *prsclr,
-+			       bool *bypass)
- {
- 	u64 clk_rate, div = 0;
- 	unsigned int pval, prescaler = 0;
- 
- 	clk_rate = clk_get_rate(sun4i_pwm->clk);
- 
-+	*bypass = sun4i_pwm->data->has_direct_mod_clk_output &&
-+		  state->enabled &&
-+		  (state->period * clk_rate >= NSEC_PER_SEC) &&
-+		  (state->period * clk_rate < 2 * NSEC_PER_SEC) &&
-+		  (state->duty_cycle * clk_rate * 2 >= NSEC_PER_SEC);
-+
-+	/* Skip calculation of other parameters if we bypass them */
-+	if (*bypass)
-+		return 0;
-+
- 	if (sun4i_pwm->data->has_prescaler_bypass) {
- 		/* First, test without any prescaler when available */
- 		prescaler = PWM_PRESCAL_MASK;
-@@ -200,10 +233,11 @@ static int sun4i_pwm_apply(struct pwm_ch
- {
- 	struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
- 	struct pwm_state cstate;
--	u32 ctrl;
-+	u32 ctrl, duty, period, val;
- 	int ret;
--	unsigned int delay_us;
-+	unsigned int delay_us, prescaler;
- 	unsigned long now;
-+	bool bypass;
- 
- 	pwm_get_state(pwm, &cstate);
- 
-@@ -218,43 +252,50 @@ static int sun4i_pwm_apply(struct pwm_ch
- 	spin_lock(&sun4i_pwm->ctrl_lock);
- 	ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
- 
--	if ((cstate.period != state->period) ||
--	    (cstate.duty_cycle != state->duty_cycle)) {
--		u32 period, duty, val;
--		unsigned int prescaler;
-+	ret = sun4i_pwm_calculate(sun4i_pwm, state, &duty, &period, &prescaler,
-+				  &bypass);
-+	if (ret) {
-+		dev_err(chip->dev, "period exceeds the maximum value\n");
-+		spin_unlock(&sun4i_pwm->ctrl_lock);
-+		if (!cstate.enabled)
-+			clk_disable_unprepare(sun4i_pwm->clk);
-+		return ret;
-+	}
- 
--		ret = sun4i_pwm_calculate(sun4i_pwm, state,
--					  &duty, &period, &prescaler);
--		if (ret) {
--			dev_err(chip->dev, "period exceeds the maximum value\n");
-+	if (sun4i_pwm->data->has_direct_mod_clk_output) {
-+		if (bypass) {
-+			ctrl |= BIT_CH(PWM_BYPASS, pwm->hwpwm);
-+			/* We can skip other parameter */
-+			sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
- 			spin_unlock(&sun4i_pwm->ctrl_lock);
--			if (!cstate.enabled)
--				clk_disable_unprepare(sun4i_pwm->clk);
--			return ret;
-+			return 0;
-+		} else {
-+			ctrl &= ~BIT_CH(PWM_BYPASS, pwm->hwpwm);
- 		}
-+	}
- 
--		if (PWM_REG_PRESCAL(ctrl, pwm->hwpwm) != prescaler) {
--			/* Prescaler changed, the clock has to be gated */
--			ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
--			sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
--
--			ctrl &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm);
--			ctrl |= BIT_CH(prescaler, pwm->hwpwm);
--		}
-+	if (PWM_REG_PRESCAL(ctrl, pwm->hwpwm) != prescaler) {
-+		/* Prescaler changed, the clock has to be gated */
-+		ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-+		sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
- 
--		val = (duty & PWM_DTY_MASK) | PWM_PRD(period);
--		sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
--		sun4i_pwm->next_period[pwm->hwpwm] = jiffies +
--			usecs_to_jiffies(cstate.period / 1000 + 1);
--		sun4i_pwm->needs_delay[pwm->hwpwm] = true;
-+		ctrl &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm);
-+		ctrl |= BIT_CH(prescaler, pwm->hwpwm);
- 	}
- 
-+	val = (duty & PWM_DTY_MASK) | PWM_PRD(period);
-+	sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
-+	sun4i_pwm->next_period[pwm->hwpwm] = jiffies +
-+		usecs_to_jiffies(cstate.period / 1000 + 1);
-+	sun4i_pwm->needs_delay[pwm->hwpwm] = true;
-+
- 	if (state->polarity != PWM_POLARITY_NORMAL)
- 		ctrl &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
- 	else
- 		ctrl |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
- 
- 	ctrl |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-+
- 	if (state->enabled) {
- 		ctrl |= BIT_CH(PWM_EN, pwm->hwpwm);
- 	} else if (!sun4i_pwm->needs_delay[pwm->hwpwm]) {
-@@ -320,6 +361,12 @@ static const struct sun4i_pwm_data sun4i
- 	.npwm = 1,
- };
- 
-+static const struct sun4i_pwm_data sun50i_h6_pwm_data = {
-+	.has_prescaler_bypass = true,
-+	.has_direct_mod_clk_output = true,
-+	.npwm = 2,
-+};
-+
- static const struct of_device_id sun4i_pwm_dt_ids[] = {
- 	{
- 		.compatible = "allwinner,sun4i-a10-pwm",
-@@ -337,6 +384,9 @@ static const struct of_device_id sun4i_p
- 		.compatible = "allwinner,sun8i-h3-pwm",
- 		.data = &sun4i_pwm_single_bypass,
- 	}, {
-+		.compatible = "allwinner,sun50i-h6-pwm",
-+		.data = &sun50i_h6_pwm_data,
-+	}, {
- 		/* sentinel */
- 	},
- };
-@@ -361,9 +411,69 @@ static int sun4i_pwm_probe(struct platfo
- 	if (IS_ERR(pwm->base))
- 		return PTR_ERR(pwm->base);
- 
--	pwm->clk = devm_clk_get(&pdev->dev, NULL);
--	if (IS_ERR(pwm->clk))
-+	/*
-+	 * All hardware variants need a source clock that is divided and
-+	 * then feeds the counter that defines the output wave form. In the
-+	 * device tree this clock is either unnamed or called "mod".
-+	 * Some variants (e.g. H6) need another clock to access the
-+	 * hardware registers; this is called "bus".
-+	 * So we request "mod" first (and ignore the corner case that a
-+	 * parent provides a "mod" clock while the right one would be the
-+	 * unnamed one of the PWM device) and if this is not found we fall
-+	 * back to the first clock of the PWM.
-+	 */
-+	pwm->clk = devm_clk_get_optional(&pdev->dev, "mod");
-+	if (IS_ERR(pwm->clk)) {
-+		if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
-+			dev_err(&pdev->dev, "get mod clock failed %pe\n",
-+				pwm->clk);
- 		return PTR_ERR(pwm->clk);
-+	}
-+
-+	if (!pwm->clk) {
-+		pwm->clk = devm_clk_get(&pdev->dev, NULL);
-+		if (IS_ERR(pwm->clk)) {
-+			if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
-+				dev_err(&pdev->dev, "get unnamed clock failed %pe\n",
-+					pwm->clk);
-+			return PTR_ERR(pwm->clk);
-+		}
-+	}
-+
-+	pwm->bus_clk = devm_clk_get_optional(&pdev->dev, "bus");
-+	if (IS_ERR(pwm->bus_clk)) {
-+		if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
-+			dev_err(&pdev->dev, "get bus clock failed %pe\n",
-+				pwm->bus_clk);
-+		return PTR_ERR(pwm->bus_clk);
-+	}
-+
-+	pwm->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
-+	if (IS_ERR(pwm->rst)) {
-+		if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
-+			dev_err(&pdev->dev, "get reset failed %pe\n",
-+				pwm->rst);
-+		return PTR_ERR(pwm->rst);
-+	}
-+
-+	/* Deassert reset */
-+	ret = reset_control_deassert(pwm->rst);
-+	if (ret) {
-+		dev_err(&pdev->dev, "cannot deassert reset control: %pe\n",
-+			ERR_PTR(ret));
-+		return ret;
-+	}
-+
-+	/*
-+	 * We're keeping the bus clock on for the sake of simplicity.
-+	 * Actually it only needs to be on for hardware register accesses.
-+	 */
-+	ret = clk_prepare_enable(pwm->bus_clk);
-+	if (ret) {
-+		dev_err(&pdev->dev, "cannot prepare and enable bus_clk %pe\n",
-+			ERR_PTR(ret));
-+		goto err_bus;
-+	}
- 
- 	pwm->chip.dev = &pdev->dev;
- 	pwm->chip.ops = &sun4i_pwm_ops;
-@@ -377,19 +487,34 @@ static int sun4i_pwm_probe(struct platfo
- 	ret = pwmchip_add(&pwm->chip);
- 	if (ret < 0) {
- 		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
--		return ret;
-+		goto err_pwm_add;
- 	}
- 
- 	platform_set_drvdata(pdev, pwm);
- 
- 	return 0;
-+
-+err_pwm_add:
-+	clk_disable_unprepare(pwm->bus_clk);
-+err_bus:
-+	reset_control_assert(pwm->rst);
-+
-+	return ret;
- }
- 
- static int sun4i_pwm_remove(struct platform_device *pdev)
- {
- 	struct sun4i_pwm_chip *pwm = platform_get_drvdata(pdev);
-+	int ret;
-+
-+	ret = pwmchip_remove(&pwm->chip);
-+	if (ret)
-+		return ret;
- 
--	return pwmchip_remove(&pwm->chip);
-+	clk_disable_unprepare(pwm->bus_clk);
-+	reset_control_assert(pwm->rst);
-+
-+	return 0;
- }
- 
- static struct platform_driver sun4i_pwm_driver = {
diff --git a/target/linux/sunxi/patches-5.4/441-arm64-dts-add-PWM-node.patch b/target/linux/sunxi/patches-5.4/441-arm64-dts-add-PWM-node.patch
deleted file mode 100644
index c14e729539..0000000000
--- a/target/linux/sunxi/patches-5.4/441-arm64-dts-add-PWM-node.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Jernej Skrabec <jernej.skrabec@siol.net>
-
-Allwinner H6 PWM is similar to that in A20 except that it has additional
-bus clock and reset line.
-
-Note that first PWM channel is connected to output pin and second
-channel is used internally, as a clock source to AC200 co-packaged chip.
-This means that any combination of these two channels can be used and
-thus it doesn't make sense to add pinctrl nodes at this point.
-
-Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
-Signed-off-by: Clément Péron <peron.clem@gmail.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
-@@ -231,6 +231,16 @@
- 			status = "disabled";
- 		};
- 
-+		pwm: pwm@300a000 {
-+			compatible = "allwinner,sun50i-h6-pwm";
-+			reg = <0x0300a000 0x400>;
-+			clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
-+			clock-names = "mod", "bus";
-+			resets = <&ccu RST_BUS_PWM>;
-+			#pwm-cells = <3>;
-+			status = "disabled";
-+		};
-+
- 		pio: pinctrl@300b000 {
- 			compatible = "allwinner,sun50i-h6-pinctrl";
- 			reg = <0x0300b000 0x400>;
diff --git a/target/linux/sunxi/patches-5.4/442-arm64-dts-orangepi-one-plus-enable-PWM.patch b/target/linux/sunxi/patches-5.4/442-arm64-dts-orangepi-one-plus-enable-PWM.patch
deleted file mode 100644
index 8ebbe3fad8..0000000000
--- a/target/linux/sunxi/patches-5.4/442-arm64-dts-orangepi-one-plus-enable-PWM.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
-@@ -10,3 +10,7 @@
- 	model = "OrangePi One Plus";
- 	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
- };
-+
-+&pwm {
-+	status = "okay";
-+};
diff --git a/target/linux/sunxi/patches-5.4/443-board-h6-orangepioneplus-fix-missing-ethernet.patch b/target/linux/sunxi/patches-5.4/443-board-h6-orangepioneplus-fix-missing-ethernet.patch
deleted file mode 100644
index 88c466d9b9..0000000000
--- a/target/linux/sunxi/patches-5.4/443-board-h6-orangepioneplus-fix-missing-ethernet.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
-@@ -9,6 +9,41 @@
- / {
- 	model = "OrangePi One Plus";
- 	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
-+
-+	aliases {
-+		serial0 = &uart0;
-+		ethernet0 = &emac;
-+	};
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+                compatible = "regulator-fixed";
-+                regulator-name = "vcc-gmac-3v3";
-+                regulator-min-microvolt = <3300000>;
-+                regulator-max-microvolt = <3300000>;
-+                startup-delay-us = <100000>;
-+                enable-active-high;
-+                gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
-+                vin-supply = <&reg_aldo2>;
-+        };
-+};
-+
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&ext_rgmii_pins>;
-+	phy-mode = "rgmii";
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	allwinner,rx-delay-ps = <200>;
-+	allwinner,tx-delay-ps = <200>;
-+	status = "okay";
-+};
-+
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+	};
- };
- 
- &pwm {
diff --git a/target/linux/sunxi/patches-5.4/450-arm64-dts-enable-wifi-on-pine64-boards.patch b/target/linux/sunxi/patches-5.4/450-arm64-dts-enable-wifi-on-pine64-boards.patch
deleted file mode 100644
index 8117338029..0000000000
--- a/target/linux/sunxi/patches-5.4/450-arm64-dts-enable-wifi-on-pine64-boards.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
-@@ -78,6 +78,11 @@
- 		regulator-min-microvolt = <1800000>;
- 		regulator-max-microvolt = <1800000>;
- 	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+	};
- };
- 
- &ac_power_supply {
-@@ -138,6 +143,21 @@
- 		reg = <1>;
- 	};
- };
-+
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_dldo4>;
-+	vqmmc-supply = <&reg_eldo1>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	rtl8723cs: wifi@1 {
-+		reg = <1>;
-+	};
-+};
- 
- &mmc2 {
- 	pinctrl-names = "default";
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-@@ -73,6 +73,11 @@
- 			};
- 		};
- 	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+	};
- };
- 
- &codec {
-@@ -146,6 +151,21 @@
- 	status = "okay";
- };
- 
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_dldo4>;
-+	vqmmc-supply = <&reg_eldo1>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	rtl8723cs: wifi@1 {
-+		reg = <1>;
-+	};
-+};
-+
- &ohci0 {
- 	status = "okay";
- };
diff --git a/target/linux/tegra/config-5.4 b/target/linux/tegra/config-5.4
deleted file mode 100644
index 8bc3ab0bd7..0000000000
--- a/target/linux/tegra/config-5.4
+++ /dev/null
@@ -1,476 +0,0 @@
-CONFIG_AC97_BUS=y
-# CONFIG_AHCI_TEGRA is not set
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
-CONFIG_ARCH_NR_GPIO=1024
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_TEGRA=y
-# CONFIG_ARCH_TEGRA_114_SOC is not set
-# CONFIG_ARCH_TEGRA_124_SOC is not set
-CONFIG_ARCH_TEGRA_2x_SOC=y
-# CONFIG_ARCH_TEGRA_3x_SOC is not set
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_754327=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_PL172_MPMC is not set
-# CONFIG_ARM_SMMU is not set
-CONFIG_ARM_TEGRA20_CPUFREQ=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASN1=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONTIG_ALLOC=y
-# CONFIG_CPUFREQ_DT is not set
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES_ARM=y
-CONFIG_CRYPTO_AKCIPHER=y
-CONFIG_CRYPTO_AKCIPHER2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_LZ4=y
-CONFIG_CRYPTO_LZ4HC=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_RSA=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA256_ARM=y
-CONFIG_CRYPTO_SHA512_ARM=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEVPORT is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DNOTIFY=y
-CONFIG_DRM=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_MIPI_DSI=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_TEGRA=y
-# CONFIG_DRM_TEGRA_DEBUG is not set
-# CONFIG_DRM_TEGRA_STAGING is not set
-CONFIG_DTC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_TEGRA=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HDMI=y
-CONFIG_HID=y
-CONFIG_HIDRAW=y
-CONFIG_HID_GENERIC=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWMON=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_TEGRA=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_IOMMU_API=y
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
-CONFIG_IOMMU_IOVA=y
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZ4HC_COMPRESS=y
-CONFIG_LZ4_COMPRESS=y
-CONFIG_LZ4_DECOMPRESS=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MEMORY_ISOLATION=y
-# CONFIG_MFD_NVEC is not set
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_CQHCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_TEGRA=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MPILIB=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NEON is not set
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IOMMU=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCI_TEGRA=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHY_TEGRA_XUSB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_TEGRA=y
-CONFIG_PINCTRL_TEGRA20=y
-CONFIG_PINCTRL_TEGRA_XUSB=y
-CONFIG_PL310_ERRATA_727915=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_PL353_SMC=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PWM=y
-CONFIG_PWM_SYSFS=y
-CONFIG_PWM_TEGRA=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TEGRA=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RTC_NVMEM=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-# CONFIG_SENSORS_DRIVETEMP is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_TEGRA=y
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SND=y
-# CONFIG_SND_COMPRESS_OFFLOAD is not set
-CONFIG_SND_DMAENGINE_PCM=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_HDA_TEGRA is not set
-CONFIG_SND_JACK=y
-CONFIG_SND_JACK_INPUT_DEV=y
-# CONFIG_SND_PCI is not set
-CONFIG_SND_PCM=y
-# CONFIG_SND_PROC_FS is not set
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_SIMPLE_CARD_UTILS=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AC97_BUS=y
-CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-CONFIG_SND_SOC_TEGRA=y
-CONFIG_SND_SOC_TEGRA20_AC97=y
-CONFIG_SND_SOC_TEGRA20_DAS=y
-CONFIG_SND_SOC_TEGRA20_I2S=y
-CONFIG_SND_SOC_TEGRA20_SPDIF=y
-# CONFIG_SND_SOC_TEGRA30_AHUB is not set
-# CONFIG_SND_SOC_TEGRA30_I2S is not set
-# CONFIG_SND_SOC_TEGRA_ALC5632 is not set
-# CONFIG_SND_SOC_TEGRA_MAX98090 is not set
-# CONFIG_SND_SOC_TEGRA_RT5640 is not set
-# CONFIG_SND_SOC_TEGRA_RT5677 is not set
-# CONFIG_SND_SOC_TEGRA_SGTL5000 is not set
-CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
-# CONFIG_SND_SOC_TEGRA_WM8753 is not set
-# CONFIG_SND_SOC_TEGRA_WM8903 is not set
-# CONFIG_SND_SOC_TEGRA_WM9712 is not set
-CONFIG_SND_SOC_TLV320AIC23=y
-CONFIG_SND_SOC_TLV320AIC23_I2C=y
-# CONFIG_SND_USB is not set
-CONFIG_SOC_BUS=y
-CONFIG_SOC_TEGRA_FLOWCTRL=y
-CONFIG_SOC_TEGRA_FUSE=y
-CONFIG_SOC_TEGRA_PMC=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_TEGRA114 is not set
-CONFIG_SPI_TEGRA20_SFLASH=y
-CONFIG_SPI_TEGRA20_SLINK=y
-CONFIG_SRCU=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TEGRA20_APB_DMA=y
-CONFIG_TEGRA20_EMC=y
-CONFIG_TEGRA_AHB=y
-CONFIG_TEGRA_GMI=y
-CONFIG_TEGRA_HOST1X=y
-CONFIG_TEGRA_HOST1X_FIREWALL=y
-CONFIG_TEGRA_IOMMU_GART=y
-# CONFIG_TEGRA_IOMMU_SMMU is not set
-# CONFIG_TEGRA_IVC is not set
-CONFIG_TEGRA_MC=y
-# CONFIG_TEGRA_SOCTHERM is not set
-CONFIG_TEGRA_TIMER=y
-CONFIG_TEGRA_WATCHDOG=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-# CONFIG_UCLAMP_TASK is not set
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_TEGRA=y
-CONFIG_USB_HID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_TEGRA_PHY=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_USB_XHCI_TEGRA is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/tegra/patches-5.4/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch b/target/linux/tegra/patches-5.4/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch
deleted file mode 100644
index 08ed9d441c..0000000000
--- a/target/linux/tegra/patches-5.4/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From patchwork Fri Jul 13 11:32:42 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: serial8250 on tegra hsuart: recover from spurious interrupts due to
- tegra2 silicon bug
-X-Patchwork-Submitter: "David R. Piegdon" <lkml@p23q.org>
-X-Patchwork-Id: 943440
-Message-Id: <4676ea34-69ce-5422-1ded-94218b89f7d9@p23q.org>
-To: linux-tegra@vger.kernel.org
-Date: Fri, 13 Jul 2018 11:32:42 +0000
-From: "David R. Piegdon" <lkml@p23q.org>
-List-Id: <linux-tegra.vger.kernel.org>
-
-Hi,
-a while back I sent a few mails regarding spurious interrupts in the
-UARTA (hsuart) block of the Tegra2 SoC, when using the 8250 driver for
-it instead of the hsuart driver. After going down a pretty deep
-debugging/testing hole, I think I found a patch that fixes the issue. So
-far testing in a reboot-cycle suggests that the error frequency dropped
-from >3% of all reboots to at least <0.05% of all reboots. Tests
-continue to run over the weekend.
-
-The patch below already is a second iteration; the first did not reset
-the MCR or contain the lines below '// clear interrupts'. This resulted
-in no more spurious interrupts, but in a few % of spurious interrupts
-that were recovered the UART block did not receive any characters any
-more. So further resetting was required to fully reacquire operational
-state of the UART block.
-
-I'd love any comments/suggestions on this!
-
-Cheers,
-
-David
-
---- a/drivers/tty/serial/8250/8250_core.c
-+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -133,6 +133,38 @@ static irqreturn_t serial8250_interrupt(
- 
- 		if (l == i->head && pass_counter++ > PASS_LIMIT)
- 			break;
-+
-+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-+		if (!handled && (port->type == PORT_TEGRA)) {
-+			/*
-+			 * Fix Tegra 2 CPU silicon bug where sometimes
-+			 * "TX holding register empty" interrupts result in a
-+			 * bad (metastable?) state in Tegras HSUART IP core.
-+			 * Only way to recover seems to be to reset all
-+			 * interrupts as well as the TX queue and the MCR.
-+			 * But we don't want to loose any outgoing characters,
-+			 * so only do it if the RX and TX queues are empty.
-+			 */
-+			unsigned char lsr = port->serial_in(port, UART_LSR);
-+			const unsigned char fifo_empty_mask =
-+						(UART_LSR_TEMT | UART_LSR_THRE);
-+			if (((lsr & (UART_LSR_DR | fifo_empty_mask)) ==
-+							fifo_empty_mask)) {
-+				port->serial_out(port, UART_IER, 0);
-+				port->serial_out(port, UART_MCR, 0);
-+				serial8250_clear_and_reinit_fifos(up);
-+				port->serial_out(port, UART_MCR, up->mcr);
-+				port->serial_out(port, UART_IER, up->ier);
-+				// clear interrupts
-+				serial_port_in(port, UART_LSR);
-+				serial_port_in(port, UART_RX);
-+				serial_port_in(port, UART_IIR);
-+				serial_port_in(port, UART_MSR);
-+				up->lsr_saved_flags = 0;
-+				up->msr_saved_flags = 0;
-+			}
-+		}
-+#endif
- 	} while (l != end);
- 
- 	spin_unlock(&i->lock);
diff --git a/target/linux/tegra/patches-5.4/101-ARM-dtc-tegra-enable-front-panel-leds-in-TrimSlice.patch b/target/linux/tegra/patches-5.4/101-ARM-dtc-tegra-enable-front-panel-leds-in-TrimSlice.patch
deleted file mode 100644
index ae48e8d862..0000000000
--- a/target/linux/tegra/patches-5.4/101-ARM-dtc-tegra-enable-front-panel-leds-in-TrimSlice.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/arch/arm/boot/dts/tegra20-trimslice.dts
-+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
-@@ -200,16 +200,17 @@
- 			conf_ata {
- 				nvidia,pins = "ata", "atc", "atd", "ate",
- 					"crtp", "dap2", "dap3", "dap4", "dta",
--					"dtb", "dtc", "dtd", "dte", "gmb",
--					"gme", "i2cp", "pta", "slxc", "slxd",
--					"spdi", "spdo", "uda";
-+					"dtb", "dtc", "dtd", "gmb", "gme",
-+					"i2cp", "pta", "slxc", "slxd", "spdi",
-+					"spdo", "uda";
- 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
- 			};
- 			conf_atb {
- 				nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
--					"gma", "gmc", "gmd", "gpu", "gpu7",
--					"gpv", "sdio1", "slxa", "slxk", "uac";
-+					"dte", "gma", "gmc", "gmd", "gpu",
-+					"gpu7", "gpv", "sdio1", "slxa", "slxk",
-+					"uac";
- 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
- 			};
-@@ -402,6 +403,20 @@
- 		};
- 	};
- 
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+
-+		ds2 {
-+			label = "trimslice:green:right";
-+			gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_LOW>;
-+		};
-+
-+		ds3 {
-+			label = "trimslice:green:left";
-+			gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
- 	poweroff {
- 		compatible = "gpio-poweroff";
- 		gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
diff --git a/target/linux/zynq/config-5.4 b/target/linux/zynq/config-5.4
deleted file mode 100644
index 38538789d8..0000000000
--- a/target/linux/zynq/config-5.4
+++ /dev/null
@@ -1,550 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_ALTERA_FREEZE_BRIDGE is not set
-# CONFIG_ALTERA_PR_IP_CORE is not set
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=1024
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA=y
-# CONFIG_ARCH_VEXPRESS_SPC is not set
-CONFIG_ARCH_ZYNQ=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_643719=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_754327=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_PL172_MPMC is not set
-# CONFIG_ARM_SMMU is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ARM_ZYNQ_CPUIDLE=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_AXI_DMAC is not set
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_PM=y
-CONFIG_BOUNCE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CADENCE_TTC_TIMER=y
-CONFIG_CADENCE_WATCHDOG=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_VERSATILE=y
-CONFIG_CLK_SP810=y
-CONFIG_CLK_VEXPRESS_OSC=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
-CONFIG_COMMON_CLK_SI570=y
-CONFIG_COMMON_CLK_VERSATILE=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONNECTOR=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_COREDUMP=y
-# CONFIG_CPUFREQ_DT is not set
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DRM=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_E1000E=y
-CONFIG_EDAC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_LEGACY_SYSFS=y
-CONFIG_EDAC_SUPPORT=y
-# CONFIG_EDAC_SYNOPSYS is not set
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_AT25=y
-CONFIG_ELF_CORE=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_XILINX is not set
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FPGA=y
-CONFIG_FPGA_BRIDGE=y
-# CONFIG_FPGA_DFL is not set
-# CONFIG_FPGA_MGR_ALTERA_CVP is not set
-# CONFIG_FPGA_MGR_ALTERA_PS_SPI is not set
-# CONFIG_FPGA_MGR_ICE40_SPI is not set
-# CONFIG_FPGA_MGR_MACHXO2_SPI is not set
-# CONFIG_FPGA_MGR_XILINX_SPI is not set
-CONFIG_FPGA_MGR_ZYNQ_FPGA=y
-CONFIG_FPGA_REGION=y
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_ZYNQ=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAVE_SMP=y
-CONFIG_HDMI=y
-CONFIG_HID=y
-CONFIG_HID_GENERIC=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CADENCE=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_ICST=y
-CONFIG_IIO=y
-CONFIG_IIO_BUFFER=y
-CONFIG_IIO_KFIFO_BUF=y
-CONFIG_IIO_TRIGGER=y
-CONFIG_IIO_TRIGGERED_BUFFER=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_INPUT_MISC is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_POLLDEV=y
-CONFIG_INPUT_SPARSEKMAP=y
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-CONFIG_JBD2=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_CAMERA=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_TRANSIENT=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_MACB=y
-# CONFIG_MACB_PCI is not set
-CONFIG_MACB_USE_HWSTAMP=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-# CONFIG_MDIO_GPIO is not set
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MFD_VEXPRESS_SYSREG=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_CQHCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_OF_ARASAN=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODULE_STRIPPED is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_CYAPA is not set
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_BYD=y
-CONFIG_MOUSE_PS2_CYPRESS=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-CONFIG_MOUSE_PS2_FOCALTECH=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SMBUS=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_VIA is not set
-CONFIG_NLS=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NO_IOPORT_MAP=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-# CONFIG_OF_FPGA_REGION is not set
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI=y
-CONFIG_PCIE_XILINX=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINCTRL_ZYNQ=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_PL310_ERRATA_727915=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_PL330_DMA=y
-# CONFIG_PL353_SMC is not set
-CONFIG_PLAT_VERSATILE=y
-CONFIG_PM=y
-CONFIG_PMBUS=y
-CONFIG_PM_CLK=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_VEXPRESS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PROC_EVENTS=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_R8169=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_VEXPRESS is not set
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_ZYNQ=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCHED_MC=y
-CONFIG_SCHED_SMT=y
-CONFIG_SENSORS_PMBUS=y
-CONFIG_SENSORS_UCD9000=y
-CONFIG_SENSORS_UCD9200=y
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_CADENCE=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_XILINX=y
-CONFIG_SPI_ZYNQ_QSPI=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_TEXTSEARCH is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UIO=y
-# CONFIG_UIO_AEC is not set
-# CONFIG_UIO_CIF is not set
-# CONFIG_UIO_DMEM_GENIRQ is not set
-# CONFIG_UIO_MF624 is not set
-# CONFIG_UIO_NETX is not set
-# CONFIG_UIO_PCI_GENERIC is not set
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_UIO_PRUSS is not set
-# CONFIG_UIO_SERCOS3 is not set
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_CHIPIDEA_OF=y
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_XILINX=y
-CONFIG_USB_HID=y
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_OTG=y
-CONFIG_USB_OTG_FSM=y
-CONFIG_USB_PHY=y
-CONFIG_USB_ROLE_SWITCH=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_ULPI_BUS=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USE_OF=y
-CONFIG_VEXPRESS_CONFIG=y
-CONFIG_VEXPRESS_SYSCFG=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VITESSE_PHY=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XILINX_EMACLITE=y
-# CONFIG_XILINX_PR_DECOUPLER is not set
-CONFIG_XILINX_WATCHDOG=y
-CONFIG_XILINX_XADC=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y